From f53e86760e10abbe7ee98a5b3cb270fa6426fcdb Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Sun, 27 Jan 2008 15:38:44 +0800 Subject: [Blackfin] arch: Add a note describing what is going on - no functional changes Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/cplbmgr.S | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/arch/blackfin/mach-common/cplbmgr.S b/arch/blackfin/mach-common/cplbmgr.S index 6f909cbfac7b..faca1ab344d2 100644 --- a/arch/blackfin/mach-common/cplbmgr.S +++ b/arch/blackfin/mach-common/cplbmgr.S @@ -75,6 +75,15 @@ ENTRY(_cplb_mgr) * from the configuration table. */ + /* A multi-word instruction can cross a page boundary. This means the + * first part of the instruction can be in a valid page, but the + * second part is not, and hence generates the instruction miss. + * However, the fault address is for the start of the instruction, + * not the part that's in the bad page. Therefore, we have to check + * whether the fault address applies to a page that is already present + * in the table. + */ + P4.L = LO(ICPLB_FAULT_ADDR); P4.H = HI(ICPLB_FAULT_ADDR); @@ -87,7 +96,7 @@ ENTRY(_cplb_mgr) R4 = [P4]; /* Get faulting address*/ R6 = 64; /* Advance past the fault address, which*/ R6 = R6 + R4; /* we'll use if we find a match*/ - R3 = ((16 << 8) | 2); /* Extract mask, bits 16 and 17.*/ + R3 = ((16 << 8) | 2); /* Extract mask, two bits at posn 16 */ R5 = 0; .Lisearch: @@ -125,7 +134,9 @@ ENTRY(_cplb_mgr) P4.L = LO(IMEM_CONTROL); P4.H = HI(IMEM_CONTROL); - /* disable cplbs */ + /* Turn off CPLBs while we work, necessary according to HRM before + * modifying CPLB descriptors + */ R5 = [P4]; /* Control Register*/ BITCLR(R5,ENICPLB_P); CLI R1; -- cgit v1.2.3-59-g8ed1b From 13fe24f37df20e580a5a364e67ec8cf3219d8f8c Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Sun, 27 Jan 2008 15:38:56 +0800 Subject: [Blackfin] arch: fix bug - trap_tests fails to recover on some tests. http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3719 When the CPLBs get a miss, we do: - find a victim in the HW table - remove the victim - find the replacement in the software table - put it into the HW table. If we can't find a replacement in the software table, we accidently leave a duplicate in the HW table. This patch ensures that duplicate is marked as not valid. What we should do is find the replacement in the software table, before we find a victim in the HW table - but its too late in the release cycle to do that much restructuring of this code. Rather that duplicate code, connect Hardware Errors (irq5) into trap_c, so user space processes get killed properly. The rest of irq_panic() can be moved into traps.c (later) There is still a small corner case that causes problems when a pheriperal interrupt goes off a single cycle before a user space hardware error. This causes a kernel panic, rather than the user space process being killed. But, this checkin makes things work in 99.9% of the cases, and is a vast improvement from what is there today (which fails 100% of the time). Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/kernel/traps.c | 54 +++++++++++++++++++++++++++++------ arch/blackfin/mach-common/cplbmgr.S | 22 ++++++++++++-- arch/blackfin/mach-common/interrupt.S | 40 +++++++++++++++++++------- arch/blackfin/mach-common/irqpanic.c | 50 -------------------------------- include/asm-blackfin/traps.h | 4 +++ 5 files changed, 99 insertions(+), 71 deletions(-) diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 21a55ef19cbd..4be5ff0be60f 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -433,6 +433,36 @@ asmlinkage void trap_c(struct pt_regs *fp) /* 0x3D - Reserved, Caught by default */ /* 0x3E - Reserved, Caught by default */ /* 0x3F - Reserved, Caught by default */ + case VEC_HWERR: + info.si_code = BUS_ADRALN; + sig = SIGBUS; + switch (fp->seqstat & SEQSTAT_HWERRCAUSE) { + /* System MMR Error */ + case (SEQSTAT_HWERRCAUSE_SYSTEM_MMR): + info.si_code = BUS_ADRALN; + sig = SIGBUS; + printk(KERN_NOTICE HWC_x2(KERN_NOTICE)); + break; + /* External Memory Addressing Error */ + case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR): + info.si_code = BUS_ADRERR; + sig = SIGBUS; + printk(KERN_NOTICE HWC_x3(KERN_NOTICE)); + break; + /* Performance Monitor Overflow */ + case (SEQSTAT_HWERRCAUSE_PERF_FLOW): + printk(KERN_NOTICE HWC_x12(KERN_NOTICE)); + break; + /* RAISE 5 instruction */ + case (SEQSTAT_HWERRCAUSE_RAISE_5): + printk(KERN_NOTICE HWC_x18(KERN_NOTICE)); + break; + default: /* Reserved */ + printk(KERN_NOTICE HWC_default(KERN_NOTICE)); + break; + } + CHK_DEBUGGER_TRAP(); + break; default: info.si_code = TRAP_ILLTRAP; sig = SIGTRAP; @@ -447,7 +477,11 @@ asmlinkage void trap_c(struct pt_regs *fp) if (sig != SIGTRAP) { unsigned long stack; dump_bfin_process(fp); - dump_bfin_mem((void *)fp->retx); + /* Is it an interrupt, or an exception? */ + if (trapnr == VEC_HWERR) + dump_bfin_mem((void *)fp->pc); + else + dump_bfin_mem((void *)fp->retx); show_regs(fp); /* Print out the trace buffer if it makes sense */ @@ -672,12 +706,11 @@ void dump_bfin_mem(void *retaddr) * context, which should mean an oops is happening */ if (oops_in_progress && x >= 0x0040 && x <= 0x0047 && i <= 0) - panic("\n\nWARNING : You should reconfigure" + printk(KERN_EMERG "\n" + KERN_EMERG "WARNING : You should reconfigure" " the kernel to turn on\n" - " 'Hardware error interrupt" - " debugging'\n" - " The rest of this error" - " is meanless\n"); + KERN_EMERG " 'Hardware error interrupt debugging'\n" + KERN_EMERG " The rest of this error is meanless\n"); #endif if (i == (unsigned int)retaddr) printk("[%04x]", x); @@ -698,6 +731,10 @@ void show_regs(struct pt_regs *fp) printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\n"); printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n", (long)fp->seqstat, fp->ipend, fp->syscfg); + printk(KERN_NOTICE " HWERRCAUSE: 0x%lx\n", + (fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14); + printk(KERN_NOTICE " EXCAUSE : 0x%lx\n", + fp->seqstat & SEQSTAT_EXCAUSE); decode_address(buf, fp->rete); printk(KERN_NOTICE " RETE: %s\n", buf); @@ -708,9 +745,10 @@ void show_regs(struct pt_regs *fp) decode_address(buf, fp->rets); printk(KERN_NOTICE " RETS: %s\n", buf); decode_address(buf, fp->pc); - printk(KERN_NOTICE " PC: %s\n", buf); + printk(KERN_NOTICE " PC : %s\n", buf); - if ((long)fp->seqstat & SEQSTAT_EXCAUSE) { + if (((long)fp->seqstat & SEQSTAT_EXCAUSE) && + (((long)fp->seqstat & SEQSTAT_EXCAUSE) != VEC_HWERR)) { decode_address(buf, bfin_read_DCPLB_FAULT_ADDR()); printk(KERN_NOTICE "DCPLB_FAULT_ADDR: %s\n", buf); decode_address(buf, bfin_read_ICPLB_FAULT_ADDR()); diff --git a/arch/blackfin/mach-common/cplbmgr.S b/arch/blackfin/mach-common/cplbmgr.S index faca1ab344d2..f5cf3accef37 100644 --- a/arch/blackfin/mach-common/cplbmgr.S +++ b/arch/blackfin/mach-common/cplbmgr.S @@ -190,7 +190,14 @@ ENTRY(_cplb_mgr) [P0 - 4] = R0; R0 = [P0 - 0x100]; [P0-0x104] = R0; -.Lie_move:P0+=4; +.Lie_move: + P0+=4; + + /* Clear ICPLB_DATA15, in case we don't find a replacement + * otherwise, we would have a duplicate entry, and will crash + */ + R0 = 0; + [P0 - 4] = R0; /* We've made space in the ICPLB table, so that ICPLB15 * is now free to be overwritten. Next, we have to determine @@ -515,14 +522,23 @@ ENTRY(_cplb_mgr) R0 = [P0++]; /* move data */ [P0 - 8] = R0; R0 = [P0-0x104] /* move address */ -.Lde_move: [P0-0x108] = R0; +.Lde_move: + [P0-0x108] = R0; + +.Lde_moved: + NOP; + + /* Clear DCPLB_DATA15, in case we don't find a replacement + * otherwise, we would have a duplicate entry, and will crash + */ + R0 = 0; + [P0 - 0x4] = R0; /* We've now made space in DCPLB15 for the new CPLB to be * installed. The next stage is to locate a CPLB in the * config table that covers the faulting address. */ -.Lde_moved:NOP; R0 = I0; /* Our faulting address */ P2.L = _dpdt_table; diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S index 4de376418a18..f983ac7ea352 100644 --- a/arch/blackfin/mach-common/interrupt.S +++ b/arch/blackfin/mach-common/interrupt.S @@ -34,9 +34,13 @@ #include #include #include +#include +#include #include +.extern _ret_from_exception + #ifdef CONFIG_I_ENTRY_L1 .section .l1.text #else @@ -134,10 +138,11 @@ __common_int_entry: /* interrupt routine for ivhw - 5 */ ENTRY(_evt_ivhw) - SAVE_CONTEXT + SAVE_ALL_SYS #ifdef CONFIG_FRAME_POINTER fp = 0; #endif + #if ANOMALY_05000283 cc = r7 == r7; p5.h = 0xffc0; @@ -147,13 +152,8 @@ ENTRY(_evt_ivhw) 1: #endif - trace_buffer_stop(p0, r0); - - r0 = IRQ_HWERR; - r1 = sp; - #ifdef CONFIG_HARDWARE_PM - r7 = SEQSTAT; + r7 = [sp + PT_SEQSTAT]; r7 = r7 >>> 0xe; r6 = 0x1F; r7 = r7 & r6; @@ -161,11 +161,29 @@ ENTRY(_evt_ivhw) cc = r7 == r5; if cc jump .Lcall_do_ovf; /* deal with performance counter overflow */ #endif - + # We are going to dump something out, so make sure we print IPEND properly + p2.l = lo(IPEND); + p2.h = hi(IPEND); + r0 = [p2]; + [sp + PT_IPEND] = r0; + + /* set the EXCAUSE to HWERR for trap_c */ + r0 = [sp + PT_SEQSTAT]; + R1.L = LO(VEC_HWERR); + R1.H = HI(VEC_HWERR); + R0 = R0 | R1; + [sp + PT_SEQSTAT] = R0; + + r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ SP += -12; - call _irq_panic; + call _trap_c; SP += 12; + + call _ret_from_exception; +.Lcommon_restore_all_sys: + RESTORE_ALL_SYS rti; + #ifdef CONFIG_HARDWARE_PM .Lcall_do_ovf: @@ -173,9 +191,11 @@ ENTRY(_evt_ivhw) call _pm_overflow; SP += 12; - jump .Lcommon_restore_context; + jump .Lcommon_restore_all_sys; #endif +ENDPROC(_evt_ivhw) + /* Interrupt routine for evt2 (NMI). * We don't actually use this, so just return. * For inner circle type details, please see: diff --git a/arch/blackfin/mach-common/irqpanic.c b/arch/blackfin/mach-common/irqpanic.c index b22959b197e5..606ded9ff4e1 100644 --- a/arch/blackfin/mach-common/irqpanic.c +++ b/arch/blackfin/mach-common/irqpanic.c @@ -46,9 +46,6 @@ void irq_panic(int reason, struct pt_regs *regs) __attribute__ ((l1_text)); */ asmlinkage void irq_panic(int reason, struct pt_regs *regs) { - int sig = 0; - siginfo_t info; - #ifdef CONFIG_DEBUG_ICACHE_CHECK unsigned int cmd, tag, ca, cache_hi, cache_lo, *pa; unsigned short i, j, die; @@ -136,53 +133,6 @@ asmlinkage void irq_panic(int reason, struct pt_regs *regs) } #endif - printk(KERN_EMERG "\n"); - printk(KERN_EMERG "Exception: IRQ 0x%x entered\n", reason); - printk(KERN_EMERG " code=[0x%08lx], stack frame=0x%08lx, " - " bad PC=0x%08lx\n", - (unsigned long)regs->seqstat, - (unsigned long)regs, - (unsigned long)regs->pc); - if (reason == 0x5) { - printk(KERN_EMERG "----------- HARDWARE ERROR -----------\n"); - - /* There is only need to check for Hardware Errors, since other - * EXCEPTIONS are handled in TRAPS.c (MH) - */ - switch (regs->seqstat & SEQSTAT_HWERRCAUSE) { - case (SEQSTAT_HWERRCAUSE_SYSTEM_MMR): /* System MMR Error */ - info.si_code = BUS_ADRALN; - sig = SIGBUS; - printk(KERN_EMERG HWC_x2(KERN_EMERG)); - break; - case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR): /* External Memory Addressing Error */ - info.si_code = BUS_ADRERR; - sig = SIGBUS; - printk(KERN_EMERG HWC_x3(KERN_EMERG)); - break; - case (SEQSTAT_HWERRCAUSE_PERF_FLOW): /* Performance Monitor Overflow */ - printk(KERN_EMERG HWC_x12(KERN_EMERG)); - break; - case (SEQSTAT_HWERRCAUSE_RAISE_5): /* RAISE 5 instruction */ - printk(KERN_EMERG HWC_x18(KERN_EMERG)); - break; - default: /* Reserved */ - printk(KERN_EMERG HWC_default(KERN_EMERG)); - break; - } - } - - regs->ipend = bfin_read_IPEND(); - dump_bfin_process(regs); - dump_bfin_mem((void *)regs->pc); - show_regs(regs); - if (0 == (info.si_signo = sig) || 0 == user_mode(regs)) /* in kernelspace */ - panic("Unhandled IRQ or exceptions!\n"); - else { /* in userspace */ - info.si_errno = 0; - info.si_addr = (void *)regs->pc; - force_sig_info(sig, &info, current); - } } #ifdef CONFIG_HARDWARE_PM diff --git a/include/asm-blackfin/traps.h b/include/asm-blackfin/traps.h index ee1cbf73a9ab..f0e5f940d9ca 100644 --- a/include/asm-blackfin/traps.h +++ b/include/asm-blackfin/traps.h @@ -45,6 +45,10 @@ #define VEC_CPLB_I_M (44) #define VEC_CPLB_I_MHIT (45) #define VEC_ILL_RES (46) /* including unvalid supervisor mode insn */ +/* The hardware reserves (63) for future use - we use it to tell our + * normal exception handling code we have a hardware error + */ +#define VEC_HWERR (63) #ifndef __ASSEMBLY__ -- cgit v1.2.3-59-g8ed1b From d8f66c8c1ea8e948483ee4739ad91120f5f7de51 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Mon, 24 Dec 2007 15:27:56 +0800 Subject: [Blackfin] arch: fix bug gdb testing on hardware has regression http://blackfin.uclinux.org/gf/project/toolchain/tracker/?action=TrackerItemEdit&tracker_item_id=3651 As Bernd predicted, this was only necessary because of other problems in the kenel - fixing those, and this is not necessary, so remove it. Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/kernel/traps.c | 37 ++++++++++++++++++++++++++++++------- 1 file changed, 30 insertions(+), 7 deletions(-) diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 4be5ff0be60f..8bbfef31666b 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #include @@ -508,13 +509,6 @@ asmlinkage void trap_c(struct pt_regs *fp) info.si_addr = (void *)fp->pc; force_sig_info(sig, &info, current); - /* Ensure that bad return addresses don't end up in an infinite - * loop, due to speculative loads/reads. This needs to be done after - * the signal has been sent. - */ - if (trapnr == VEC_CPLB_I_M && sig != SIGTRAP) - fp->pc = SAFE_USER_INSTRUCTION; - trace_buffer_restore(j); return; } @@ -727,6 +721,9 @@ void dump_bfin_mem(void *retaddr) void show_regs(struct pt_regs *fp) { char buf [150]; + struct irqaction *action; + unsigned int i; + unsigned long flags; printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\n"); printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n", @@ -735,6 +732,32 @@ void show_regs(struct pt_regs *fp) (fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14); printk(KERN_NOTICE " EXCAUSE : 0x%lx\n", fp->seqstat & SEQSTAT_EXCAUSE); + for (i = 6; i <= 15 ; i++) { + if (fp->ipend & (1 << i)) { + decode_address(buf, bfin_read32(EVT0 + 4*i)); + printk(KERN_NOTICE " physical IVG%i asserted : %s\n", i, buf); + } + } + + /* if no interrupts are going off, don't print this out */ + if (fp->ipend & ~0x3F) { + for (i = 0; i < (NR_IRQS - 1); i++) { + spin_lock_irqsave(&irq_desc[i].lock, flags); + action = irq_desc[i].action; + if (!action) + goto unlock; + + decode_address(buf, (unsigned int)action->handler); + printk(KERN_NOTICE " logical irq %3d mapped : %s", i, buf); + for (action = action->next; action; action = action->next) { + decode_address(buf, (unsigned int)action->handler); + printk(", %s", buf); + } + printk("\n"); +unlock: + spin_unlock_irqrestore(&irq_desc[i].lock, flags); + } + } decode_address(buf, fp->rete); printk(KERN_NOTICE " RETE: %s\n", buf); -- cgit v1.2.3-59-g8ed1b From 0626d79686b4536eac1dc88e2cf52d927a5010c2 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Fri, 21 Dec 2007 17:46:33 +0800 Subject: [Blackfin] arch: do not use hard coded addresses Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/interrupt.S | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S index f983ac7ea352..7f752c87fe46 100644 --- a/arch/blackfin/mach-common/interrupt.S +++ b/arch/blackfin/mach-common/interrupt.S @@ -121,8 +121,8 @@ __common_int_entry: #if ANOMALY_05000283 || ANOMALY_05000315 cc = r7 == r7; - p5.h = 0xffc0; - p5.l = 0x0014; + p5.h = HI(CHIPID); + p5.l = LO(CHIPID); if cc jump 1f; r7.l = W[p5]; 1: @@ -145,8 +145,8 @@ ENTRY(_evt_ivhw) #if ANOMALY_05000283 cc = r7 == r7; - p5.h = 0xffc0; - p5.l = 0x0014; + p5.h = HI(CHIPID); + p5.l = LO(CHIPID); if cc jump 1f; r7.l = W[p5]; 1: -- cgit v1.2.3-59-g8ed1b From 6f3ed704b03b2f9997b604690ac43a3514105a6a Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Fri, 21 Dec 2007 17:48:07 +0800 Subject: [Blackfin] arch: do not use fixed numbers to describe offsets - no functional changes Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/entry.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index dc9d3ee2e691..1b25b57c8c05 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -329,7 +329,7 @@ ENTRY(_exception_to_level5) R7 = R7 + R6; P5 = R7; R1 = [P5]; - [SP + 8] = r1; + [SP + PT_SEQSTAT] = r1; r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ SP += -12; -- cgit v1.2.3-59-g8ed1b From d5c4b5e3b2682a9aac07a43a8a79d3b692b22567 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Fri, 21 Dec 2007 17:49:53 +0800 Subject: [Blackfin] arch: Let the pre-processor do the math to save a few cycles - no functional changes Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/entry.S | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 1b25b57c8c05..58f7ad617992 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -633,9 +633,7 @@ ENTRY(_ret_from_exception) [sp + PT_IPEND] = r0; 1: - r1 = 0x37(Z); - r2 = ~r1; - r2.h = 0; + r2 = LO(~0x37) (Z); r0 = r2 & r0; cc = r0 == 0; if !cc jump 4f; /* if not return to user mode, get out */ -- cgit v1.2.3-59-g8ed1b From fb96c56de33def1484614c6a3d0fbef76595ce2f Mon Sep 17 00:00:00 2001 From: Javier Herrero Date: Fri, 21 Dec 2007 18:26:44 +0800 Subject: [Blackfin] arch: Added support for 8250-class UARTs in HV Sistemas H8606 board, modification in 8250.c driver for correct compilation with Blackfin Signed-off-by: Javier Herrero Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf533/boards/H8606.c | 51 +++++++++++++++++++++++++++++++-- 1 file changed, 49 insertions(+), 2 deletions(-) diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index 6bcf4047f89c..675fd1c62805 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -40,6 +40,7 @@ #endif #include #include + #include #include #include @@ -303,7 +304,49 @@ static struct platform_device bfin_uart_device = { }; #endif -static struct platform_device *stamp_devices[] __initdata = { +#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) + +#include +#include + +/* + * Configuration for two 16550 UARTS in FPGA at addresses 0x20200000 and 0x202000010. + * running at half system clock, both with interrupt output or-ed to PF8. Change to + * suit different FPGA configuration, or to suit real 16550 UARTS connected to the bus + */ + +static struct plat_serial8250_port serial8250_platform_data [] = { + { + .membase = 0x20200000, + .mapbase = 0x20200000, + .irq = IRQ_PF8, + .flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE, + .iotype = UPIO_MEM, + .regshift = 1, + .uartclk = 66666667, + }, { + .membase = 0x20200010, + .mapbase = 0x20200010, + .irq = IRQ_PF8, + .flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE, + .iotype = UPIO_MEM, + .regshift = 1, + .uartclk = 66666667, + }, { + } +}; + +static struct platform_device serial8250_device = { + .id = PLAT8250_DEV_PLATFORM, + .name = "serial8250", + .dev = { + .platform_data = serial8250_platform_data, + }, +}; + +#endif + +static struct platform_device *h8606_devices[] __initdata = { #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, #endif @@ -327,13 +370,17 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif + +#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) + &serial8250_device, +#endif }; static int __init H8606_init(void) { printk(KERN_INFO "HV Sistemas H8606 board support by http://www.hvsistemas.com\n"); printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); - platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); + platform_add_devices(h8606_devices, ARRAY_SIZE(h8606_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif -- cgit v1.2.3-59-g8ed1b From a5bb85dfffd38714d83cf7798886462d7314b90a Mon Sep 17 00:00:00 2001 From: Cliff Cai Date: Fri, 21 Dec 2007 21:04:40 +0800 Subject: [Blackfin] arch: fix bug SDIO driver fails to build for BF542/BF548 modified CMD_TIMEOUT and DAT_TIMEOUT to CMD_TIME_OUT and DAT_TIME_OUT Signed-off-by: Cliff Cai Signed-off-by: Bryan Wu --- include/asm-blackfin/mach-bf548/defBF542.h | 4 ++-- include/asm-blackfin/mach-bf548/defBF548.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/include/asm-blackfin/mach-bf548/defBF542.h b/include/asm-blackfin/mach-bf548/defBF542.h index 32d07130200c..a7c809f29ede 100644 --- a/include/asm-blackfin/mach-bf548/defBF542.h +++ b/include/asm-blackfin/mach-bf548/defBF542.h @@ -432,8 +432,8 @@ #define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ #define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ -#define CMD_TIMEOUT 0x4 /* CMD Time Out */ -#define DAT_TIMEOUT 0x8 /* Data Time Out */ +#define CMD_TIME_OUT 0x4 /* CMD Time Out */ +#define DAT_TIME_OUT 0x8 /* Data Time Out */ #define TX_UNDERRUN 0x10 /* Transmit Underrun */ #define RX_OVERRUN 0x20 /* Receive Overrun */ #define CMD_RESP_END 0x40 /* CMD Response End */ diff --git a/include/asm-blackfin/mach-bf548/defBF548.h b/include/asm-blackfin/mach-bf548/defBF548.h index ecbca952985c..e46f56891e6a 100644 --- a/include/asm-blackfin/mach-bf548/defBF548.h +++ b/include/asm-blackfin/mach-bf548/defBF548.h @@ -1095,8 +1095,8 @@ #define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ #define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ -#define CMD_TIMEOUT 0x4 /* CMD Time Out */ -#define DAT_TIMEOUT 0x8 /* Data Time Out */ +#define CMD_TIME_OUT 0x4 /* CMD Time Out */ +#define DAT_TIME_OUT 0x8 /* Data Time Out */ #define TX_UNDERRUN 0x10 /* Transmit Underrun */ #define RX_OVERRUN 0x20 /* Receive Overrun */ #define CMD_RESP_END 0x40 /* CMD Response End */ -- cgit v1.2.3-59-g8ed1b From c50e19f49830fb651b4b702ad2c3abcdf110b576 Mon Sep 17 00:00:00 2001 From: Yi Li Date: Fri, 21 Dec 2007 21:12:21 +0800 Subject: [Blackfin] arch: fix bug - make memcpy return the dest addr. The memcpy() function returns the src pointer instead of the dst pointer. This patch fix this bug. Signed-off-by: Yi Li Signed-off-by: Bryan Wu --- arch/blackfin/lib/memcpy.S | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/arch/blackfin/lib/memcpy.S b/arch/blackfin/lib/memcpy.S index 2e6336492b4b..e654a18a0754 100644 --- a/arch/blackfin/lib/memcpy.S +++ b/arch/blackfin/lib/memcpy.S @@ -70,8 +70,8 @@ ENTRY(_memcpy) /* Check for aligned data.*/ R3 = R1 | R0; - R0 = 0x3; - R3 = R3 & R0; + R1 = 0x3; + R3 = R3 & R1; CC = R3; /* low bits set on either address? */ IF CC JUMP .Lnot_aligned; @@ -83,7 +83,6 @@ ENTRY(_memcpy) /* less than eight bytes... */ P2 = R2; LSETUP(.Lthree_start, .Lthree_end) LC0=P2; - R0 = R1; /* setup src address for return */ .Lthree_start: R3 = B[P1++] (X); .Lthree_end: @@ -95,7 +94,6 @@ ENTRY(_memcpy) /* There's at least eight bytes to copy. */ P2 += -1; /* because we unroll one iteration */ LSETUP(.Lword_loops, .Lword_loope) LC0=P2; - R0 = R1; I1 = P1; R3 = [I1++]; #if ANOMALY_05000202 @@ -120,7 +118,6 @@ ENTRY(_memcpy) .Lnot_aligned: /* From here, we're copying byte-by-byte. */ LSETUP (.Lbyte_start, .Lbyte_end) LC0=P2; - R0 = R1; /* Save src address for return */ .Lbyte_start: R1 = B[P1++] (X); .Lbyte_end: @@ -135,7 +132,6 @@ ENTRY(_memcpy) * Don't bother to work out alignment for * the reverse case. */ - R0 = R1; /* save src for later. */ P0 = P0 + P2; P0 += -1; P1 = P1 + P2; -- cgit v1.2.3-59-g8ed1b From fb5f00492a748facc9f069c95621e05c148edf53 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Sun, 23 Dec 2007 23:02:13 +0800 Subject: [Blackfin] arch: Fix bug to Enable kernel to build for bf548 with PM. On BF548-EZKIT, build kernel faills with power management, video and audio enabled. This patch fix this. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- arch/blackfin/Kconfig | 2 ++ arch/blackfin/mach-bf548/head.S | 8 +++--- arch/blackfin/mach-bf548/ints-priority.c | 2 +- arch/blackfin/mach-common/dpmc.S | 46 ++++++++++++++++++++++++------ arch/blackfin/mach-common/pm.c | 16 +++++++++++ include/asm-blackfin/mach-bf548/irq.h | 4 +-- include/asm-blackfin/mach-bf548/mem_init.h | 1 + 7 files changed, 64 insertions(+), 15 deletions(-) diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 25232ba08119..5ebcfd226ed8 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -951,6 +951,8 @@ config PM_WAKEUP_SIC_IWR depends on PM_WAKEUP_GPIO_BY_SIC_IWR default 0x80000000 if (BF537 || BF536 || BF534) default 0x100000 if (BF533 || BF532 || BF531) + default 0x800000 if (BF549 || BF548 || BF547 || BF542) + default 0x800000 if (BF527 || BF524 || BF522) config PM_WAKEUP_GPIO_NUMBER int "Wakeup GPIO number" diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index 74b34c7f3629..745662e88759 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -298,8 +298,8 @@ ENTRY(_start_dma_code) w[p0] = r0.l; ssync; - p0.h = hi(SIC_IWR); - p0.l = lo(SIC_IWR); + p0.h = hi(SIC_IWR0); + p0.l = lo(SIC_IWR0); r0.l = 0x1; r0.h = 0x0; [p0] = r0; @@ -395,8 +395,8 @@ ENTRY(_start_dma_code) [P2] = R1; SSYNC; - p0.h = hi(SIC_IWR); - p0.l = lo(SIC_IWR); + p0.h = hi(SIC_IWR0); + p0.l = lo(SIC_IWR0); r0.l = lo(IWR_ENABLE_ALL); r0.h = hi(IWR_ENABLE_ALL); [p0] = r0; diff --git a/arch/blackfin/mach-bf548/ints-priority.c b/arch/blackfin/mach-bf548/ints-priority.c index cb0ebac53c79..05e3b3cb4c0a 100644 --- a/arch/blackfin/mach-bf548/ints-priority.c +++ b/arch/blackfin/mach-bf548/ints-priority.c @@ -58,7 +58,7 @@ void program_IAR(void) ((CONFIG_IRQ_PINT1 - 7) << IRQ_PINT1_POS) | ((CONFIG_IRQ_MDMAS0 - 7) << IRQ_MDMAS0_POS) | ((CONFIG_IRQ_MDMAS1 - 7) << IRQ_MDMAS1_POS) | - ((CONFIG_IRQ_WATCHDOG - 7) << IRQ_WATCHDOG_POS)); + ((CONFIG_IRQ_WATCHDOG - 7) << IRQ_WATCH_POS)); bfin_write_SIC_IAR3(((CONFIG_IRQ_DMAC1_ERR - 7) << IRQ_DMAC1_ERR_POS) | ((CONFIG_IRQ_SPORT2_ERR - 7) << IRQ_SPORT2_ERR_POS) | diff --git a/arch/blackfin/mach-common/dpmc.S b/arch/blackfin/mach-common/dpmc.S index 39fbc2861107..301ac1b6681f 100644 --- a/arch/blackfin/mach-common/dpmc.S +++ b/arch/blackfin/mach-common/dpmc.S @@ -38,6 +38,9 @@ ENTRY(_unmask_wdog_wakeup_evt) #if defined(CONFIG_BF561) P0.H = hi(SICA_IWR1); P0.L = lo(SICA_IWR1); +#elif defined(CONFIG_BF54x) || defined(CONFIG_BF52x) + P0.h = HI(SIC_IWR0); + P0.l = LO(SIC_IWR0); #else P0.h = HI(SIC_IWR); P0.l = LO(SIC_IWR); @@ -236,7 +239,7 @@ ENTRY(_deep_sleep) call _set_sic_iwr; - call _set_sdram_srfs; + call _set_dram_srfs; /* Clear all the interrupts,bits sticky */ R0 = 0xFFFF (Z); @@ -253,7 +256,7 @@ ENTRY(_deep_sleep) SSYNC; IDLE; - call _unset_sdram_srfs; + call _unset_dram_srfs; call _test_pll_locked; @@ -285,7 +288,7 @@ ENTRY(_sleep_deeper) P3 = R0; R0 = IWR_ENABLE(0); call _set_sic_iwr; - call _set_sdram_srfs; + call _set_dram_srfs; /* Clear all the interrupts,bits sticky */ R0 = 0xFFFF (Z); @@ -360,7 +363,7 @@ ENTRY(_sleep_deeper) IDLE; call _test_pll_locked; - call _unset_sdram_srfs; + call _unset_dram_srfs; STI R4; @@ -368,25 +371,47 @@ ENTRY(_sleep_deeper) ( R7:0, P5:0 ) = [SP++]; RTS; -ENTRY(_set_sdram_srfs) - /* set the sdram to self refresh mode */ +ENTRY(_set_dram_srfs) + /* set the dram to self refresh mode */ +#if defined(CONFIG_BF54x) + P0.H = hi(EBIU_RSTCTL); + P0.L = lo(EBIU_RSTCTL); + R2 = [P0]; + R3.H = hi(SRREQ); + R3.L = lo(SRREQ); +#else P0.H = hi(EBIU_SDGCTL); P0.L = lo(EBIU_SDGCTL); R2 = [P0]; R3.H = hi(SRFS); R3.L = lo(SRFS); +#endif R2 = R2|R3; [P0] = R2; ssync; +#if defined(CONFIG_BF54x) +.LSRR_MODE: + R2 = [P0]; + CC = BITTST(R2, 4); + if !CC JUMP .LSRR_MODE; +#endif RTS; -ENTRY(_unset_sdram_srfs) - /* set the sdram out of self refresh mode */ +ENTRY(_unset_dram_srfs) + /* set the dram out of self refresh mode */ +#if defined(CONFIG_BF54x) + P0.H = hi(EBIU_RSTCTL); + P0.L = lo(EBIU_RSTCTL); + R2 = [P0]; + R3.H = hi(SRREQ); + R3.L = lo(SRREQ); +#else P0.H = hi(EBIU_SDGCTL); P0.L = lo(EBIU_SDGCTL); R2 = [P0]; R3.H = hi(SRFS); R3.L = lo(SRFS); +#endif R3 = ~R3; R2 = R2&R3; [P0] = R2; @@ -394,8 +419,13 @@ ENTRY(_unset_sdram_srfs) RTS; ENTRY(_set_sic_iwr) +#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) + P0.H = hi(SIC_IWR0); + P0.L = lo(SIC_IWR0); +#else P0.H = hi(SIC_IWR); P0.L = lo(SIC_IWR); +#endif [P0] = R0; SSYNC; RTS; diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c index dac51fb06f22..81930f7d06f1 100644 --- a/arch/blackfin/mach-common/pm.c +++ b/arch/blackfin/mach-common/pm.c @@ -77,7 +77,15 @@ void bfin_pm_suspend_standby_enter(void) gpio_pm_restore(); +#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) + bfin_write_SIC_IWR0(IWR_ENABLE_ALL); + bfin_write_SIC_IWR1(IWR_ENABLE_ALL); +# ifdef CONFIG_BF54x + bfin_write_SIC_IWR2(IWR_ENABLE_ALL); +# endif +#else bfin_write_SIC_IWR(IWR_ENABLE_ALL); +#endif local_irq_restore(flags); } @@ -85,7 +93,15 @@ void bfin_pm_suspend_standby_enter(void) #if defined(CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR) sleep_deeper(CONFIG_PM_WAKEUP_SIC_IWR); +# if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) + bfin_write_SIC_IWR0(IWR_ENABLE_ALL); + bfin_write_SIC_IWR1(IWR_ENABLE_ALL); +# ifdef CONFIG_BF54x + bfin_write_SIC_IWR2(IWR_ENABLE_ALL); +# endif +# else bfin_write_SIC_IWR(IWR_ENABLE_ALL); +# endif #endif /* CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR */ } diff --git a/include/asm-blackfin/mach-bf548/irq.h b/include/asm-blackfin/mach-bf548/irq.h index 9fb7bc5399a8..c34507a3f1df 100644 --- a/include/asm-blackfin/mach-bf548/irq.h +++ b/include/asm-blackfin/mach-bf548/irq.h @@ -88,7 +88,7 @@ Events (highest priority) EMU 0 #define IRQ_PINT1 BFIN_IRQ(20) /* PINT1 Interrupt */ #define IRQ_MDMAS0 BFIN_IRQ(21) /* MDMA Stream 0 Interrupt */ #define IRQ_MDMAS1 BFIN_IRQ(22) /* MDMA Stream 1 Interrupt */ -#define IRQ_WATCHDOG BFIN_IRQ(23) /* Watchdog Interrupt */ +#define IRQ_WATCH BFIN_IRQ(23) /* Watchdog Interrupt */ #define IRQ_DMAC1_ERROR BFIN_IRQ(24) /* DMAC1 Status (Error) Interrupt */ #define IRQ_SPORT2_ERROR BFIN_IRQ(25) /* SPORT2 Error Interrupt */ #define IRQ_SPORT3_ERROR BFIN_IRQ(26) /* SPORT3 Error Interrupt */ @@ -406,7 +406,7 @@ Events (highest priority) EMU 0 #define IRQ_PINT1_POS 16 #define IRQ_MDMAS0_POS 20 #define IRQ_MDMAS1_POS 24 -#define IRQ_WATCHDOG_POS 28 +#define IRQ_WATCH_POS 28 /* IAR3 BIT FIELDS */ #define IRQ_DMAC1_ERR_POS 0 diff --git a/include/asm-blackfin/mach-bf548/mem_init.h b/include/asm-blackfin/mach-bf548/mem_init.h index 0cb279e973d7..e792eb7ae6a0 100644 --- a/include/asm-blackfin/mach-bf548/mem_init.h +++ b/include/asm-blackfin/mach-bf548/mem_init.h @@ -30,6 +30,7 @@ */ #if (CONFIG_MEM_MT46V32M16) +#endif #if defined CONFIG_CLKIN_HALF #define CLKIN_HALF 1 -- cgit v1.2.3-59-g8ed1b From 0d4a89bb3eb58f39831186fa6b1542893dbfdc9f Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Sun, 27 Jan 2008 19:58:46 +0800 Subject: [Blackfin] arch: add Hitachi TX09D70VM1CDA TFT LCD driver resource to Blackfin board Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf537/boards/cm_bf537.c | 10 ++++++++++ arch/blackfin/mach-bf561/boards/cm_bf561.c | 11 +++++++++++ 2 files changed, 21 insertions(+) diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index c0fb06dbc42e..a102615cac7c 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -216,6 +216,12 @@ static struct platform_device rtc_device = { }; #endif +#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +static struct platform_device hitachi_fb_device = { + .name = "hitachi-tx09", +}; +#endif + #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) static struct resource smc91x_resources[] = { { @@ -374,6 +380,10 @@ static struct platform_device bfin_pata_device = { #endif static struct platform_device *cm_bf537_devices[] __initdata = { +#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) + &hitachi_fb_device, +#endif + #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, #endif diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index c19cd29b948a..3a79a9061bdc 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -198,6 +198,13 @@ static struct platform_device bfin_spi0_device = { #endif /* spi master and devices */ +#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +static struct platform_device hitachi_fb_device = { + .name = "hitachi-tx09", +}; +#endif + + #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) static struct resource smc91x_resources[] = { @@ -315,6 +322,10 @@ static struct platform_device bfin_pata_device = { static struct platform_device *cm_bf561_devices[] __initdata = { +#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) + &hitachi_fb_device, +#endif + #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif -- cgit v1.2.3-59-g8ed1b From b03b08ba9c7235861adf4dde712dade0bb756fe0 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Sun, 23 Dec 2007 22:57:01 +0800 Subject: [Blackfin] arch: Clean up dump_bfin_mem Clean up dump_bfin_mem so that it will display content from the kernel, as well as l1 instruction, when deferred HW errors happen, print out the last frame info if it makes sense. Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/kernel/early_printk.c | 2 +- arch/blackfin/kernel/process.c | 1 + arch/blackfin/kernel/traps.c | 132 +++++++++++++++++++++++------------- include/asm-blackfin/bfin-global.h | 2 +- 4 files changed, 87 insertions(+), 50 deletions(-) diff --git a/arch/blackfin/kernel/early_printk.c b/arch/blackfin/kernel/early_printk.c index 724f4a5a1d46..c892777267d5 100644 --- a/arch/blackfin/kernel/early_printk.c +++ b/arch/blackfin/kernel/early_printk.c @@ -205,7 +205,7 @@ asmlinkage void __init early_trap_c(struct pt_regs *fp, void *retaddr) if (likely(early_console == NULL)) setup_early_printk(DEFAULT_EARLY_PORT); - dump_bfin_mem((void *)fp->retx); + dump_bfin_mem(fp); show_regs(fp); dump_bfin_trace_buffer(); diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 5bf15125f0d6..fff3dd9eadda 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -327,6 +327,7 @@ void finish_atomic_sections (struct pt_regs *regs) } #if defined(CONFIG_ACCESS_CHECK) +/* Return 1 if access to memory range is OK, 0 otherwise */ int _access_ok(unsigned long addr, unsigned long size) { if (size == 0) diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 8bbfef31666b..c90f16825f98 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -39,6 +39,7 @@ #include #include #include +#include #ifdef CONFIG_KGDB # include @@ -171,7 +172,7 @@ asmlinkage void double_fault_c(struct pt_regs *fp) oops_in_progress = 1; printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n"); dump_bfin_process(fp); - dump_bfin_mem((void *)fp->retx); + dump_bfin_mem(fp); show_regs(fp); panic("Double Fault - unrecoverable event\n"); @@ -196,6 +197,10 @@ asmlinkage void trap_c(struct pt_regs *fp) * we will kernel panic, so the system reboots. * If KGDB is enabled, don't set this for kernel breakpoints */ + + /* TODO: check to see if we are in some sort of deferred HWERR + * that we should be able to recover from, not kernel panic + */ if ((bfin_read_IPEND() & 0xFFC0) #ifdef CONFIG_KGDB && trapnr != VEC_EXCPT02 @@ -478,11 +483,7 @@ asmlinkage void trap_c(struct pt_regs *fp) if (sig != SIGTRAP) { unsigned long stack; dump_bfin_process(fp); - /* Is it an interrupt, or an exception? */ - if (trapnr == VEC_HWERR) - dump_bfin_mem((void *)fp->pc); - else - dump_bfin_mem((void *)fp->retx); + dump_bfin_mem(fp); show_regs(fp); /* Print out the trace buffer if it makes sense */ @@ -644,8 +645,10 @@ void dump_bfin_process(struct pt_regs *fp) if (oops_in_progress) printk(KERN_EMERG "Kernel OOPS in progress\n"); - if (context & 0x0020) - printk(KERN_NOTICE "Deferred excecption or HW Error context\n"); + if (context & 0x0020 && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) + printk(KERN_NOTICE "HW Error context\n"); + else if (context & 0x0020) + printk(KERN_NOTICE "Defered Exception context\n"); else if (context & 0x3FC0) printk(KERN_NOTICE "Interrupt context\n"); else if (context & 0x4000) @@ -673,49 +676,82 @@ void dump_bfin_process(struct pt_regs *fp) "No Valid process in current context\n"); } -void dump_bfin_mem(void *retaddr) +void dump_bfin_mem(struct pt_regs *fp) { + unsigned short *addr, *erraddr, val = 0, err = 0; + char sti = 0, buf[6]; - if (retaddr >= (void *)FIXED_CODE_START && retaddr < (void *)physical_mem_end -#if L1_CODE_LENGTH != 0 - /* FIXME: Copy the code out of L1 Instruction SRAM through dma - memcpy. */ - && !(retaddr >= (void *)L1_CODE_START - && retaddr < (void *)(L1_CODE_START + L1_CODE_LENGTH)) -#endif - ) { - int i = ((unsigned int)retaddr & 0xFFFFFFF0) - 32; - unsigned short x = 0; - printk(KERN_NOTICE "return address: [0x%p]; contents of:", retaddr); - for (; i < ((unsigned int)retaddr & 0xFFFFFFF0) + 32; i += 2) { - if (!(i & 0xF)) - printk("\n" KERN_NOTICE "0x%08x: ", i); - - if (get_user(x, (unsigned short *)i)) - break; + if (unlikely((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR)) + erraddr = (void *)fp->pc; + else + erraddr = (void *)fp->retx; + + printk(KERN_NOTICE "return address: [0x%p]; contents of:", erraddr); + + for (addr = (unsigned short *)((unsigned long)erraddr & ~0xF) - 0x10; + addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10; + addr++) { + if (!((unsigned long)addr & 0xF)) + printk("\n" KERN_NOTICE "0x%p: ", addr); + + if (get_user(val, addr)) { + if (addr >= (unsigned short *)L1_CODE_START && + addr < (unsigned short *)(L1_CODE_START + L1_CODE_LENGTH)) { + dma_memcpy(&val, addr, sizeof(val)); + sprintf(buf, "%04x", val); + } else if (addr >= (unsigned short *)FIXED_CODE_START && + addr <= (unsigned short *)memory_start) { + val = bfin_read16(addr); + sprintf(buf, "%04x", val); + } else { + val = 0; + sprintf(buf, "????"); + } + } else + sprintf(buf, "%04x", val); + + if (addr == erraddr) { + printk("[%s]", buf); + err = val; + } else + printk(" %s ", buf); + + /* Do any previous instructions turn on interrupts? */ + if (addr <= erraddr && /* in the past */ + ((val >= 0x0040 && val <= 0x0047) || /* STI instruction */ + val == 0x017b)) /* [SP++] = RETI */ + sti = 1; + } + + printk("\n"); + + /* Hardware error interrupts can be deferred */ + if (unlikely(sti && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR && + oops_in_progress)){ + printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n"); #ifndef CONFIG_DEBUG_HWERR - /* If one of the last few instructions was a STI - * it is likely that the error occured awhile ago - * and we just noticed. This only happens in kernel - * context, which should mean an oops is happening - */ - if (oops_in_progress && x >= 0x0040 && x <= 0x0047 && i <= 0) - printk(KERN_EMERG "\n" - KERN_EMERG "WARNING : You should reconfigure" - " the kernel to turn on\n" - KERN_EMERG " 'Hardware error interrupt debugging'\n" - KERN_EMERG " The rest of this error is meanless\n"); -#endif - if (i == (unsigned int)retaddr) - printk("[%04x]", x); - else - printk(" %04x ", x); + printk(KERN_NOTICE "The remaining message may be meaningless\n" + KERN_NOTICE "You should enable CONFIG_DEBUG_HWERR to get a" + " better idea where it came from\n"); +#else + /* If we are handling only one peripheral interrupt + * and current mm and pid are valid, and the last error + * was in that user space process's text area + * print it out - because that is where the problem exists + */ + if ((!(((fp)->ipend & ~0x30) & (((fp)->ipend & ~0x30) - 1))) && + (current->pid && current->mm)) { + /* And the last RETI points to the current userspace context */ + if ((fp + 1)->pc >= current->mm->start_code && + (fp + 1)->pc <= current->mm->end_code) { + printk(KERN_NOTICE "It might be better to look around here : \n"); + printk(KERN_NOTICE "-------------------------------------------\n"); + show_regs(fp + 1); + printk(KERN_NOTICE "-------------------------------------------\n"); + } } - printk("\n"); - } else - printk("\n" KERN_NOTICE - "Cannot look at the [PC] <%p> for it is" - " in unreadable memory - sorry\n", retaddr); +#endif + } } void show_regs(struct pt_regs *fp) @@ -885,7 +921,7 @@ void panic_cplb_error(int cplb_panic, struct pt_regs *fp) printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", (void *)bfin_read_DCPLB_FAULT_ADDR()); printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", (void *)bfin_read_ICPLB_FAULT_ADDR()); dump_bfin_process(fp); - dump_bfin_mem((void *)fp->retx); + dump_bfin_mem(fp); show_regs(fp); dump_stack(); panic("Unrecoverable event\n"); diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h index 39bdd86871cf..6ae0619d7696 100644 --- a/include/asm-blackfin/bfin-global.h +++ b/include/asm-blackfin/bfin-global.h @@ -51,7 +51,7 @@ extern unsigned long sclk_to_usecs(unsigned long sclk); extern unsigned long usecs_to_sclk(unsigned long usecs); extern void dump_bfin_process(struct pt_regs *regs); -extern void dump_bfin_mem(void *retaddr); +extern void dump_bfin_mem(struct pt_regs *regs); extern void dump_bfin_trace_buffer(void); extern int init_arch_irq(void); -- cgit v1.2.3-59-g8ed1b From 971d5bc4e5c75bfc4466deaff09839cd6f918eca Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Sun, 27 Jan 2008 16:32:31 +0800 Subject: [Blackfin] arch: Fix bug to Enable bf548 to Re-program Clocks while Kernel boots. Reprogram DDR EBIU register properly for bf548. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- arch/blackfin/Kconfig | 19 +++++++- arch/blackfin/mach-bf548/head.S | 47 +++++++++++++++++++ include/asm-blackfin/mach-bf548/defBF54x_base.h | 31 ++++++++++++- include/asm-blackfin/mach-bf548/mem_init.h | 61 ++++++++++++++++++++++++- 4 files changed, 153 insertions(+), 5 deletions(-) diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 5ebcfd226ed8..1364dcaccc18 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -317,7 +317,7 @@ config VCO_MULT range 1 64 default "22" if BFIN533_EZKIT default "45" if BFIN533_STAMP - default "20" if (BFIN537_STAMP || BFIN527_EZKIT) + default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT) default "22" if BFIN533_BLUETECHNIX_CM default "20" if BFIN537_BLUETECHNIX_CM default "20" if BFIN561_BLUETECHNIX_CM @@ -354,7 +354,7 @@ config SCLK_DIV range 1 15 default 5 if BFIN533_EZKIT default 5 if BFIN533_STAMP - default 4 if (BFIN537_STAMP || BFIN527_EZKIT) + default 4 if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT) default 5 if BFIN533_BLUETECHNIX_CM default 4 if BFIN537_BLUETECHNIX_CM default 4 if BFIN561_BLUETECHNIX_CM @@ -409,6 +409,7 @@ config MEM_SIZE default 32 if BFIN533_EZKIT default 64 if BFIN527_EZKIT default 64 if BFIN537_STAMP + default 64 if BFIN548_EZKIT default 64 if BFIN561_EZKIT default 128 if BFIN533_STAMP default 64 if PNAV10 @@ -416,6 +417,7 @@ config MEM_SIZE config MEM_ADD_WIDTH int "SDRAM Memory Address Width" + depends on (!BF54x) default 9 if BFIN533_EZKIT default 9 if BFIN561_EZKIT default 9 if H8606_HVSISTEMAS @@ -424,6 +426,19 @@ config MEM_ADD_WIDTH default 11 if BFIN533_STAMP default 10 if PNAV10 + +choice + prompt "DDR SDRAM Chip Type" + depends on BFIN548_EZKIT + default MEM_MT46V32M16_5B + +config MEM_MT46V32M16_6T + bool "MT46V32M16_6T" + +config MEM_MT46V32M16_5B + bool "MT46V32M16_5B" +endchoice + config ENET_FLASH_PIN int "PF port/pin used for flash and ethernet sharing" depends on (BFIN533_STAMP) diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index 745662e88759..74fe258421a5 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -324,12 +324,25 @@ ENTRY(_start_dma_code) w[p0] = r0.l; ssync; +#if defined(CONFIG_BF54x) + P2.H = hi(EBIU_RSTCTL); + P2.L = lo(EBIU_RSTCTL); + R0 = [P2]; + BITSET (R0, 3); +#else P2.H = hi(EBIU_SDGCTL); P2.L = lo(EBIU_SDGCTL); R0 = [P2]; BITSET (R0, 24); +#endif [P2] = R0; SSYNC; +#if defined(CONFIG_BF54x) +.LSRR_MODE: + R0 = [P2]; + CC = BITTST(R0, 4); + if !CC JUMP .LSRR_MODE; +#endif r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ r0 = r0 << 9; /* Shift it over, */ @@ -361,6 +374,39 @@ ENTRY(_start_dma_code) w[p0] = r0.l; ssync; +#if defined(CONFIG_BF54x) + P2.H = hi(EBIU_RSTCTL); + P2.L = lo(EBIU_RSTCTL); + R0 = [P2]; + CC = BITTST(R0, 0); + if CC jump .Lskipddrrst; + BITSET (R0, 0); +.Lskipddrrst: + BITCLR (R0, 3); + [P2] = R0; + SSYNC; + + p0.l = lo(EBIU_DDRCTL0); + p0.h = hi(EBIU_DDRCTL0); + r0.l = lo(mem_DDRCTL0); + r0.h = hi(mem_DDRCTL0); + [p0] = r0; + ssync; + + p0.l = lo(EBIU_DDRCTL1); + p0.h = hi(EBIU_DDRCTL1); + r0.l = lo(mem_DDRCTL1); + r0.h = hi(mem_DDRCTL1); + [p0] = r0; + ssync; + + p0.l = lo(EBIU_DDRCTL2); + p0.h = hi(EBIU_DDRCTL2); + r0.l = lo(mem_DDRCTL2); + r0.h = hi(mem_DDRCTL2); + [p0] = r0; + ssync; +#else p0.l = lo(EBIU_SDRRC); p0.h = hi(EBIU_SDRRC); r0 = mem_SDRRC; @@ -394,6 +440,7 @@ ENTRY(_start_dma_code) R1 = R1 | R0; [P2] = R1; SSYNC; +#endif p0.h = hi(SIC_IWR0); p0.l = lo(SIC_IWR0); diff --git a/include/asm-blackfin/mach-bf548/defBF54x_base.h b/include/asm-blackfin/mach-bf548/defBF54x_base.h index 319a48590c9c..08f90c21fe8a 100644 --- a/include/asm-blackfin/mach-bf548/defBF54x_base.h +++ b/include/asm-blackfin/mach-bf548/defBF54x_base.h @@ -1772,17 +1772,36 @@ #define TRP 0x3c0000 /* Pre charge-to-active command period */ #define TRAS 0x3c00000 /* Min Active-to-pre charge time */ #define TRC 0x3c000000 /* Active-to-active time */ +#define DDR_TRAS(x) ((x<<22)&TRAS) /* DDR tRAS = (1~15) cycles */ +#define DDR_TRP(x) ((x<<18)&TRP) /* DDR tRP = (1~15) cycles */ +#define DDR_TRC(x) ((x<<26)&TRC) /* DDR tRC = (1~15) cycles */ +#define DDR_TRFC(x) ((x<<14)&TRFC) /* DDR tRFC = (1~15) cycles */ +#define DDR_TREFI(x) (x&TREFI) /* DDR tRFC = (1~15) cycles */ /* Bit masks for EBIU_DDRCTL1 */ #define TRCD 0xf /* Active-to-Read/write delay */ -#define MRD 0xf0 /* Mode register set to active */ +#define TMRD 0xf0 /* Mode register set to active */ #define TWR 0x300 /* Write Recovery time */ #define DDRDATWIDTH 0x3000 /* DDR data width */ #define EXTBANKS 0xc000 /* External banks */ #define DDRDEVWIDTH 0x30000 /* DDR device width */ #define DDRDEVSIZE 0xc0000 /* DDR device size */ -#define TWWTR 0xf0000000 /* Write-to-read delay */ +#define TWTR 0xf0000000 /* Write-to-read delay */ +#define DDR_TWTR(x) ((x<<28)&TWTR) /* DDR tWTR = (1~15) cycles */ +#define DDR_TMRD(x) ((x<<4)&TMRD) /* DDR tMRD = (1~15) cycles */ +#define DDR_TWR(x) ((x<<8)&TWR) /* DDR tWR = (1~15) cycles */ +#define DDR_TRCD(x) (x&TRCD) /* DDR tRCD = (1~15) cycles */ +#define DDR_DATWIDTH 0x2000 /* DDR data width */ +#define EXTBANK_1 0 /* 1 external bank */ +#define EXTBANK_2 0x4000 /* 2 external banks */ +#define DEVSZ_64 0x40000 /* DDR External Bank Size = 64MB */ +#define DEVSZ_128 0x80000 /* DDR External Bank Size = 128MB */ +#define DEVSZ_256 0xc0000 /* DDR External Bank Size = 256MB */ +#define DEVSZ_512 0 /* DDR External Bank Size = 512MB */ +#define DEVWD_4 0 /* DDR Device Width = 4 Bits */ +#define DEVWD_8 0x10000 /* DDR Device Width = 8 Bits */ +#define DEVWD_16 0x20000 /* DDR Device Width = 16 Bits */ /* Bit masks for EBIU_DDRCTL2 */ @@ -1790,6 +1809,10 @@ #define CASLATENCY 0x70 /* CAS latency */ #define DLLRESET 0x100 /* DLL Reset */ #define REGE 0x1000 /* Register mode enable */ +#define CL_1_5 0x50 /* DDR CAS Latency = 1.5 cycles */ +#define CL_2 0x20 /* DDR CAS Latency = 2 cycles */ +#define CL_2_5 0x60 /* DDR CAS Latency = 2.5 cycles */ +#define CL_3 0x30 /* DDR CAS Latency = 3 cycles */ /* Bit masks for EBIU_DDRCTL3 */ @@ -2257,6 +2280,10 @@ #define CSEL 0x30 /* Core Select */ #define SSEL 0xf /* System Select */ +#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ +#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ +#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ +#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ /* Bit masks for PLL_CTL */ diff --git a/include/asm-blackfin/mach-bf548/mem_init.h b/include/asm-blackfin/mach-bf548/mem_init.h index e792eb7ae6a0..befc2903d5a5 100644 --- a/include/asm-blackfin/mach-bf548/mem_init.h +++ b/include/asm-blackfin/mach-bf548/mem_init.h @@ -28,10 +28,69 @@ * If not, write to the Free Software Foundation, * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ +#define MIN_DDR_SCLK(x) (x*(CONFIG_SCLK_HZ/1000/1000)/1000 + 1) -#if (CONFIG_MEM_MT46V32M16) +#if (CONFIG_MEM_MT46V32M16_6T) +#define DDR_SIZE DEVSZ_512 +#define DDR_WIDTH DEVWD_16 + +#define DDR_tRC DDR_TRC(MIN_DDR_SCLK(60)) +#define DDR_tRAS DDR_TRAS(MIN_DDR_SCLK(42)) +#define DDR_tRP DDR_TRP(MIN_DDR_SCLK(15)) +#define DDR_tRFC DDR_TRFC(MIN_DDR_SCLK(72)) +#define DDR_tREFI DDR_TREFI(MIN_DDR_SCLK(7800)) + +#define DDR_tRCD DDR_TRCD(MIN_DDR_SCLK(15)) +#define DDR_tWTR DDR_TWTR(1) +#define DDR_tMRD DDR_TMRD(MIN_DDR_SCLK(12)) +#define DDR_tWR DDR_TWR(MIN_DDR_SCLK(15)) +#endif + +#if (CONFIG_MEM_MT46V32M16_5B) +#define DDR_SIZE DEVSZ_512 +#define DDR_WIDTH DEVWD_16 + +#define DDR_tRC DDR_TRC(MIN_DDR_SCLK(55)) +#define DDR_tRAS DDR_TRAS(MIN_DDR_SCLK(40)) +#define DDR_tRP DDR_TRP(MIN_DDR_SCLK(15)) +#define DDR_tRFC DDR_TRFC(MIN_DDR_SCLK(70)) +#define DDR_tREFI DDR_TREFI(MIN_DDR_SCLK(7800)) + +#define DDR_tRCD DDR_TRCD(MIN_DDR_SCLK(15)) +#define DDR_tWTR DDR_TWTR(2) +#define DDR_tMRD DDR_TMRD(MIN_DDR_SCLK(10)) +#define DDR_tWR DDR_TWR(MIN_DDR_SCLK(15)) +#endif + +#if (CONFIG_MEM_GENERIC_BOARD) +#define DDR_SIZE DEVSZ_512 +#define DDR_WIDTH DEVWD_16 + +#define DDR_tRCD DDR_TRCD(3) +#define DDR_tWTR DDR_TWTR(2) +#define DDR_tWR DDR_TWR(2) +#define DDR_tMRD DDR_TMRD(2) +#define DDR_tRP DDR_TRP(3) +#define DDR_tRAS DDR_TRAS(7) +#define DDR_tRC DDR_TRC(10) +#define DDR_tRFC DDR_TRFC(12) +#define DDR_tREFI DDR_TREFI(1288) #endif +#if (CONFIG_SCLK_HZ <= 133333333) +#define DDR_CL CL_2 +#elif (CONFIG_SCLK_HZ <= 166666666) +#define DDR_CL CL_2_5 +#else +#define DDR_CL CL_3 +#endif + +#define mem_DDRCTL0 (DDR_tRP | DDR_tRAS | DDR_tRC | DDR_tRFC | DDR_tREFI) +#define mem_DDRCTL1 (DDR_DATWIDTH | EXTBANK_1 | DDR_SIZE | DDR_WIDTH | DDR_tWTR \ + | DDR_tMRD | DDR_tWR | DDR_tRCD) +#define mem_DDRCTL2 DDR_CL + + #if defined CONFIG_CLKIN_HALF #define CLKIN_HALF 1 #else -- cgit v1.2.3-59-g8ed1b From 1089e228737019b9711a6a394eebe25bf46b22d9 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 24 Dec 2007 11:49:29 +0800 Subject: [Blackfin] arch: Enable peripheral platform resources on the BF527 EZkit Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf527/boards/ezkit.c | 98 +++++++++++++++++++++++++++++++++ 1 file changed, 98 insertions(+) diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 003e2ac654d8..bc256811a5e3 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -41,6 +41,7 @@ #include #include #include +#include #include #include #include @@ -105,6 +106,69 @@ void __exit bfin_isp1761_exit(void) arch_initcall(bfin_isp1761_init); #endif +#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +static struct resource musb_resources[] = { + [0] = { + .start = 0xffc03800, + .end = 0xffc03cff, + .flags = IORESOURCE_MEM, + }, + [1] = { /* general IRQ */ + .start = IRQ_USB_INT0, + .end = IRQ_USB_INT0, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, + [2] = { /* DMA IRQ */ + .start = IRQ_USB_DMA, + .end = IRQ_USB_DMA, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct musb_hdrc_platform_data musb_plat = { +#if defined(CONFIG_USB_MUSB_OTG) + .mode = MUSB_OTG, +#elif defined(CONFIG_USB_MUSB_HDRC_HCD) + .mode = MUSB_HOST, +#elif defined(CONFIG_USB_GADGET_MUSB_HDRC) + .mode = MUSB_PERIPHERAL, +#endif + .multipoint = 0, +}; + +static u64 musb_dmamask = ~(u32)0; + +static struct platform_device musb_device = { + .name = "musb_hdrc", + .id = 0, + .dev = { + .dma_mask = &musb_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &musb_plat, + }, + .num_resources = ARRAY_SIZE(musb_resources), + .resource = musb_resources, +}; +#endif + +#if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE) + +static struct resource bf52x_t350mcqb_resources[] = { + { + .start = IRQ_PPI_ERROR, + .end = IRQ_PPI_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bf52x_t350mcqb_device = { + .name = "bfin-t350mcqb", + .id = -1, + .num_resources = ARRAY_SIZE(bf52x_t350mcqb_resources), + .resource = bf52x_t350mcqb_resources, +}; +#endif + #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) static struct mtd_partition partition_info[] = { { @@ -718,6 +782,28 @@ static struct platform_device bfin_pata_device = { }; #endif +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include +#include + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) &bf5xx_nand_device, @@ -739,6 +825,10 @@ static struct platform_device *stamp_devices[] __initdata = { &isp1362_hcd_device, #endif +#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) + &musb_device, +#endif + #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, #endif @@ -763,6 +853,10 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_fb_device, #endif +#if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE) + &bf52x_t350mcqb_device, +#endif + #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) &bfin_fb_adv7393_device, #endif @@ -783,6 +877,10 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) &bfin_pata_device, #endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif }; static int __init stamp_init(void) -- cgit v1.2.3-59-g8ed1b From 50657afdd95a595a68d4ef420300638c0880db37 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 24 Dec 2007 00:16:01 +0800 Subject: [Blackfin] arch: Trash bf54x-hcd driver - we use the musb driver Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf548/boards/ezkit.c | 21 --------------------- 1 file changed, 21 deletions(-) diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index d37d6653c4bc..4d966eb2e998 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -206,23 +206,6 @@ static struct platform_device smsc911x_device = { }; #endif -#if defined(CONFIG_USB_BF54x_HCD) || defined(CONFIG_USB_BF54x_HCD_MODULE) -static struct resource bf54x_hcd_resources[] = { - { - .start = 0xFFC03C00, - .end = 0xFFC040FF, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device bf54x_hcd = { - .name = "bf54x-hcd", - .id = 0, - .num_resources = ARRAY_SIZE(bf54x_hcd_resources), - .resource = bf54x_hcd_resources, -}; -#endif - #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) static struct resource musb_resources[] = { [0] = { @@ -548,10 +531,6 @@ static struct platform_device *ezkit_devices[] __initdata = { &smsc911x_device, #endif -#if defined(CONFIG_USB_BF54x_HCD) || defined(CONFIG_USB_BF54x_HCD_MODULE) - &bf54x_hcd, -#endif - #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) &musb_device, #endif -- cgit v1.2.3-59-g8ed1b From f31db2a8e824de67b3480c1502d70a9c902c7c1b Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Thu, 24 Jan 2008 16:14:35 +0800 Subject: [Blackfin] arch: update defconfig of boards Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/configs/BF527-EZKIT_defconfig | 17 +++--- arch/blackfin/configs/BF533-EZKIT_defconfig | 17 +++--- arch/blackfin/configs/BF533-STAMP_defconfig | 39 +++---------- arch/blackfin/configs/BF537-STAMP_defconfig | 50 ++++++++++------ arch/blackfin/configs/BF548-EZKIT_defconfig | 90 +++++++++++++++++++---------- arch/blackfin/configs/BF561-EZKIT_defconfig | 32 +++++----- 6 files changed, 134 insertions(+), 111 deletions(-) diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index fa6eb4e00fae..d59ee1530bd4 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.12 +# Linux kernel version: 2.6.22.14 +# Thu Nov 29 17:32:47 2007 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -153,8 +154,8 @@ CONFIG_BFIN527_EZKIT=y CONFIG_BF527_SPORT0_PORTG=y CONFIG_BF527_SPORT0_TSCLK_PG10=y # CONFIG_BF527_SPORT0_TSCLK_PG14 is not set -# CONFIG_BF527_UART1_PORTF is not set -CONFIG_BF527_UART1_PORTG=y +CONFIG_BF527_UART1_PORTF=y +# CONFIG_BF527_UART1_PORTG is not set # CONFIG_BF527_NAND_D_PORTF is not set CONFIG_BF527_NAND_D_PORTH=y @@ -232,7 +233,7 @@ CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MAX_SCLK_HZ=133333333 CONFIG_MIN_SCLK_HZ=27000000 # @@ -626,8 +627,8 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y # CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y # # Wireless LAN @@ -1183,7 +1184,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1208,7 +1209,7 @@ CONFIG_ACCESS_CHECK=y # CONFIG_KEYS is not set CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=y +CONFIG_SECURITY_CAPABILITIES=m # # Cryptographic options @@ -1219,7 +1220,7 @@ CONFIG_SECURITY_CAPABILITIES=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set +CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 4fdb49362ba3..811711f59a25 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.12 +# Linux kernel version: 2.6.22.16 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -115,7 +115,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # Processor and Board Settings # # CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set # CONFIG_BF525 is not set +# CONFIG_BF526 is not set # CONFIG_BF527 is not set # CONFIG_BF531 is not set # CONFIG_BF532 is not set @@ -194,7 +197,7 @@ CONFIG_CLKIN_HZ=27000000 # CONFIG_BFIN_KERNEL_CLOCK is not set CONFIG_MAX_VCO_HZ=750000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MAX_SCLK_HZ=133333333 CONFIG_MIN_SCLK_HZ=27000000 # @@ -267,6 +270,7 @@ CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_WB is not set CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set # # Asynchonous Memory Configuration @@ -321,7 +325,7 @@ CONFIG_PM=y CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y # CONFIG_PM_WAKEUP_BY_GPIO is not set # CONFIG_PM_WAKEUP_GPIO_API is not set -CONFIG_PM_WAKEUP_SIC_IWR=0x100000 +CONFIG_PM_WAKEUP_SIC_IWR=0x80 # # CPU Frequency scaling @@ -510,7 +514,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_INTELEXT is not set # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_MW320D=m CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set @@ -520,9 +523,6 @@ CONFIG_MTD_ROM=m # CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_BF5xx=m -CONFIG_BFIN_FLASH_SIZE=0x400000 -CONFIG_EBIU_FLASH_BASE=0x20000000 # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -610,8 +610,8 @@ CONFIG_SMC91X=y # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y # CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y # # Wireless LAN @@ -680,7 +680,6 @@ CONFIG_INPUT_EVDEV=m CONFIG_BFIN_SPORT=y # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_AD5304 is not set -# CONFIG_BF5xx_FBDMA is not set # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index b04e8e533e9a..9b7123cf27a3 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.12 +# Linux kernel version: 2.6.22.16 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -115,7 +115,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # Processor and Board Settings # # CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set # CONFIG_BF525 is not set +# CONFIG_BF526 is not set # CONFIG_BF527 is not set # CONFIG_BF531 is not set # CONFIG_BF532 is not set @@ -140,7 +143,6 @@ CONFIG_BF_REV_0_3=y CONFIG_BF53x=y CONFIG_BFIN_SINGLE_CORE=y CONFIG_MEM_MT48LC64M4A2FB_7E=y -CONFIG_BFIN_SHARED_FLASH_ENET=y # CONFIG_BFIN533_EZKIT is not set CONFIG_BFIN533_STAMP=y # CONFIG_BFIN533_BLUETECHNIX_CM is not set @@ -195,7 +197,7 @@ CONFIG_CLKIN_HZ=11059200 # CONFIG_BFIN_KERNEL_CLOCK is not set CONFIG_MAX_VCO_HZ=750000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MAX_SCLK_HZ=133333333 CONFIG_MIN_SCLK_HZ=27000000 # @@ -215,18 +217,10 @@ CONFIG_MEM_ADD_WIDTH=11 CONFIG_ENET_FLASH_PIN=0 CONFIG_BOOT_LOAD=0x1000 -# -# LED Status Indicators -# -# CONFIG_BFIN_ALIVE_LED is not set -# CONFIG_BFIN_IDLE_LED is not set + CONFIG_BFIN_SCRATCH_REG_RETN=y # CONFIG_BFIN_SCRATCH_REG_RETE is not set # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set -CONFIG_BFIN_ALIVE_LED_PORT=0xFFC00700 -CONFIG_BFIN_ALIVE_LED_DPORT=0xFFC00730 -CONFIG_BFIN_IDLE_LED_PORT=0xFFC00700 -CONFIG_BFIN_IDLE_LED_DPORT=0xFFC00730 # # Blackfin Kernel Optimizations @@ -279,6 +273,7 @@ CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_WB is not set CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set # # Asynchonous Memory Configuration @@ -333,7 +328,7 @@ CONFIG_PM=y CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y # CONFIG_PM_WAKEUP_BY_GPIO is not set # CONFIG_PM_WAKEUP_GPIO_API is not set -CONFIG_PM_WAKEUP_SIC_IWR=0x100000 +CONFIG_PM_WAKEUP_SIC_IWR=0x80 # # CPU Frequency scaling @@ -522,7 +517,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_INTELEXT is not set # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_MW320D=m CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set @@ -532,17 +526,6 @@ CONFIG_MTD_ROM=m # CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_BF5xx=m -CONFIG_BFIN_FLASH_SIZE=0x400000 -CONFIG_EBIU_FLASH_BASE=0x20000000 - -# -# FLASH_EBIU_AMBCTL Control -# -CONFIG_BFIN_FLASH_BANK_0=0x7BB0 -CONFIG_BFIN_FLASH_BANK_1=0x7BB0 -CONFIG_BFIN_FLASH_BANK_2=0x7BB0 -CONFIG_BFIN_FLASH_BANK_3=0x7BB0 # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -630,8 +613,8 @@ CONFIG_SMC91X=y # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y # CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y # # Wireless LAN @@ -687,7 +670,6 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_UINPUT is not set -# CONFIG_BF53X_PFBUTTONS is not set CONFIG_TWI_KEYPAD=m CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39 @@ -711,8 +693,6 @@ CONFIG_BFIN_SPORT=y CONFIG_TWI_LCD=m CONFIG_TWI_LCD_SLAVE_ADDR=34 # CONFIG_AD5304 is not set -# CONFIG_BF5xx_TEA5764 is not set -# CONFIG_BF5xx_FBDMA is not set # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set @@ -778,7 +758,6 @@ CONFIG_I2C_ALGOBIT=m # # I2C Hardware Bus support # -# CONFIG_I2C_BLACKFIN_GPIO is not set # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index f812b66318b9..b37ccc681e7a 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.12 +# Linux kernel version: 2.6.22.16 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -115,7 +115,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # Processor and Board Settings # # CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set # CONFIG_BF525 is not set +# CONFIG_BF526 is not set # CONFIG_BF527 is not set # CONFIG_BF531 is not set # CONFIG_BF532 is not set @@ -170,6 +173,7 @@ CONFIG_IRQ_WATCH=13 CONFIG_BFIN537_STAMP=y # CONFIG_BFIN537_BLUETECHNIX_CM is not set # CONFIG_PNAV10 is not set +# CONFIG_CAMSIG_MINOTAUR is not set # CONFIG_GENERIC_BF537_BOARD is not set # @@ -201,7 +205,7 @@ CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MAX_SCLK_HZ=133333333 CONFIG_MIN_SCLK_HZ=27000000 # @@ -274,6 +278,7 @@ CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_WB is not set CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set # # Asynchonous Memory Configuration @@ -328,7 +333,7 @@ CONFIG_PM=y CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y # CONFIG_PM_WAKEUP_BY_GPIO is not set # CONFIG_PM_WAKEUP_GPIO_API is not set -CONFIG_PM_WAKEUP_SIC_IWR=0x80000000 +CONFIG_PM_WAKEUP_SIC_IWR=0x8 # # CPU Frequency scaling @@ -483,7 +488,7 @@ CONFIG_MTD=y # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y # # User Modules And Translation Layers @@ -500,8 +505,8 @@ CONFIG_MTD_BLOCK=y # # RAM/ROM/Flash chip drivers # -# CONFIG_MTD_CFI is not set -CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_CFI=m +# CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_GEN_PROBE=m # CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y @@ -515,9 +520,9 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_CFI_INTELEXT is not set -# CONFIG_MTD_CFI_AMDSTD is not set +CONFIG_MTD_CFI_AMDSTD=m # CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_MW320D=m +CONFIG_MTD_CFI_UTIL=m CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set @@ -525,11 +530,11 @@ CONFIG_MTD_ROM=m # # Mapping drivers for chip access # -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_BF5xx=m -CONFIG_BFIN_FLASH_SIZE=0x400000 -CONFIG_EBIU_FLASH_BASE=0x20000000 +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=m +CONFIG_MTD_PHYSMAP_START=0x20000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -647,8 +652,8 @@ CONFIG_BFIN_RX_DESC_NUM=20 # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y # CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y # # Wireless LAN @@ -704,7 +709,6 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_UINPUT is not set -# CONFIG_BF53X_PFBUTTONS is not set CONFIG_TWI_KEYPAD=m CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72 @@ -728,8 +732,6 @@ CONFIG_BFIN_SPORT=y CONFIG_TWI_LCD=m CONFIG_TWI_LCD_SLAVE_ADDR=34 # CONFIG_AD5304 is not set -# CONFIG_BF5xx_TEA5764 is not set -# CONFIG_BF5xx_FBDMA is not set # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set @@ -802,7 +804,6 @@ CONFIG_I2C_CHARDEV=m # # I2C Hardware Bus support # -# CONFIG_I2C_BLACKFIN_GPIO is not set CONFIG_I2C_BLACKFIN_TWI=m CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 # CONFIG_I2C_GPIO is not set @@ -957,6 +958,7 @@ CONFIG_LQ035_SLAVE_ADDR=0x58 # CONFIG_FB_BFIN_LANDSCAPE is not set # CONFIG_FB_BFIN_BGR is not set # CONFIG_FB_BFIN_T350MCQB is not set +# CONFIG_FB_HITACHI_TX09 is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_LOGO is not set @@ -1008,12 +1010,22 @@ CONFIG_SND_BFIN_AD73311_SE=4 # # System on Chip audio support # -# CONFIG_SND_SOC is not set +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_SOC=m +CONFIG_SND_BF5XX_SOC=m +CONFIG_SND_BF5XX_SOC_AC97=m +# CONFIG_SND_BF5XX_SOC_WM8750 is not set +# CONFIG_SND_BF5XX_SOC_WM8731 is not set +CONFIG_SND_BF5XX_SOC_BF5xx=m +CONFIG_SND_BF5XX_SPORT_NUM=0 +# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set +CONFIG_SND_SOC_AD1980=m # # Open Sound System # # CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m # # HID Devices diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index 48367cc9fe35..fd702161ef59 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.12 +# Linux kernel version: 2.6.22.16 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -115,7 +115,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # Processor and Board Settings # # CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set # CONFIG_BF525 is not set +# CONFIG_BF526 is not set # CONFIG_BF527 is not set # CONFIG_BF531 is not set # CONFIG_BF532 is not set @@ -126,8 +129,8 @@ CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_BF542 is not set # CONFIG_BF544 is not set # CONFIG_BF547 is not set -# CONFIG_BF548 is not set -CONFIG_BF549=y +CONFIG_BF548=y +# CONFIG_BF549 is not set # CONFIG_BF561 is not set CONFIG_BF_REV_0_0=y # CONFIG_BF_REV_0_1 is not set @@ -265,9 +268,9 @@ CONFIG_PINT3_ASSIGN=0x02020303 # CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set -CONFIG_MAX_VCO_HZ=533000000 +CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MAX_SCLK_HZ=133333333 CONFIG_MIN_SCLK_HZ=27000000 # @@ -283,7 +286,8 @@ CONFIG_HZ=250 # Memory Setup # CONFIG_MEM_SIZE=64 -CONFIG_MEM_ADD_WIDTH=10 +# CONFIG_MEM_MT46V32M16_6T is not set +CONFIG_MEM_MT46V32M16_5B=y CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y # CONFIG_BFIN_SCRATCH_REG_RETE is not set @@ -340,6 +344,7 @@ CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_WB is not set CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set # # Asynchonous Memory Configuration @@ -349,6 +354,7 @@ CONFIG_L1_MAX_PIECE=16 # EBIU_AMGCTL Global Control # CONFIG_C_AMCKEN=y +# CONFIG_C_CDPRIO is not set # CONFIG_C_AMBEN is not set # CONFIG_C_AMBEN_B0 is not set # CONFIG_C_AMBEN_B0_B1 is not set @@ -362,9 +368,9 @@ CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x5554 CONFIG_BANK_2=0x7BB0 CONFIG_BANK_3=0x99B3 -CONFIG_EBUI_MBSCTLVAL=0x0 -CONFIG_EBUI_MODEVAL=0x1 -CONFIG_EBUI_FCTLVAL=0x6 +CONFIG_EBIU_MBSCTLVAL=0x0 +CONFIG_EBIU_MODEVAL=0x1 +CONFIG_EBIU_FCTLVAL=0x6 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) @@ -537,7 +543,6 @@ CONFIG_MTD_CFI_I2=y CONFIG_MTD_CFI_INTELEXT=y # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set -# CONFIG_MTD_MW320D is not set CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set @@ -549,9 +554,8 @@ CONFIG_MTD_RAM=y CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_START=0x20000000 -CONFIG_MTD_PHYSMAP_LEN=0x400000 +CONFIG_MTD_PHYSMAP_LEN=0 CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_BF5xx is not set # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -690,8 +694,8 @@ CONFIG_MII=y CONFIG_SMSC911X=y # CONFIG_DM9000 is not set CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y # CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y # # Wireless LAN @@ -719,7 +723,7 @@ CONFIG_NETDEV_10000=y # # Input device support # -CONFIG_INPUT=m +CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set @@ -745,7 +749,8 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_GPIO is not set -CONFIG_KEYBOARD_BFIN=m +CONFIG_KEYBOARD_BFIN=y +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -768,7 +773,6 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_UINPUT is not set -# CONFIG_BF53X_PFBUTTONS is not set # CONFIG_TWI_KEYPAD is not set # @@ -786,13 +790,16 @@ CONFIG_INPUT_MISC=y # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set +CONFIG_BFIN_OTP=y +# CONFIG_BFIN_OTP_WRITE_ENABLE is not set # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_TWI_LCD is not set # CONFIG_AD5304 is not set -# CONFIG_BF5xx_TEA5764 is not set -# CONFIG_BF5xx_FBDMA is not set -# CONFIG_VT is not set +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -858,7 +865,6 @@ CONFIG_I2C_CHARDEV=y # # I2C Hardware Bus support # -# CONFIG_I2C_BLACKFIN_GPIO is not set CONFIG_I2C_BLACKFIN_TWI=y CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 # CONFIG_I2C_GPIO is not set @@ -976,12 +982,12 @@ CONFIG_DAB=y # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set -CONFIG_FB=m +CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set -CONFIG_FB_CFB_FILLRECT=m -CONFIG_FB_CFB_COPYAREA=m -CONFIG_FB_CFB_IMAGEBLIT=m +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set @@ -998,11 +1004,34 @@ CONFIG_FB_DEFERRED_IO=y # # CONFIG_FB_BFIN_7171 is not set # CONFIG_FB_BFIN_7393 is not set -CONFIG_FB_BF54X_LQ043=m +CONFIG_FB_BF54X_LQ043=y # CONFIG_FB_BFIN_T350MCQB is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set -# CONFIG_LOGO is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +CONFIG_FONT_6x11=y +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +# CONFIG_LOGO_BLACKFIN_VGA16 is not set +CONFIG_LOGO_BLACKFIN_CLUT224=y # # Sound @@ -1051,7 +1080,8 @@ CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y # CONFIG_SND_BF5XX_SOC_WM8750 is not set # CONFIG_SND_BF5XX_SOC_WM8731 is not set CONFIG_SND_BF5XX_SPORT_NUM=0 -# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set +CONFIG_SND_BF5XX_HAVE_COLD_RESET=y +CONFIG_SND_BF5XX_RESET_GPIO_NUM=19 CONFIG_SND_SOC_AD1980=y # @@ -1403,7 +1433,7 @@ CONFIG_NLS_UTF8=m # # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y +# CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1428,7 +1458,7 @@ CONFIG_ACCESS_CHECK=y # CONFIG_KEYS is not set CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=y +CONFIG_SECURITY_CAPABILITIES=m # # Cryptographic options @@ -1439,7 +1469,7 @@ CONFIG_SECURITY_CAPABILITIES=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set +CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index e9f100b45eb1..8546994939fb 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.12 +# Linux kernel version: 2.6.22.16 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -115,7 +115,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # Processor and Board Settings # # CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set # CONFIG_BF525 is not set +# CONFIG_BF526 is not set # CONFIG_BF527 is not set # CONFIG_BF531 is not set # CONFIG_BF532 is not set @@ -238,7 +241,7 @@ CONFIG_CLKIN_HZ=30000000 # CONFIG_BFIN_KERNEL_CLOCK is not set CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 -CONFIG_MAX_SCLK_HZ=133000000 +CONFIG_MAX_SCLK_HZ=133333333 CONFIG_MIN_SCLK_HZ=27000000 # @@ -311,6 +314,7 @@ CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_WB is not set CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set # # Asynchonous Memory Configuration @@ -512,7 +516,7 @@ CONFIG_MTD=y # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y # # User Modules And Translation Layers @@ -529,8 +533,8 @@ CONFIG_MTD_BLOCK=y # # RAM/ROM/Flash chip drivers # -# CONFIG_MTD_CFI is not set -CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_CFI=m +# CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_GEN_PROBE=m # CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y @@ -544,9 +548,9 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_CFI_INTELEXT is not set -# CONFIG_MTD_CFI_AMDSTD is not set +CONFIG_MTD_CFI_AMDSTD=m # CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_MW320D=m +CONFIG_MTD_CFI_UTIL=m CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set @@ -554,12 +558,11 @@ CONFIG_MTD_ROM=m # # Mapping drivers for chip access # -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_EZKIT561 is not set -CONFIG_MTD_BF5xx=m -CONFIG_BFIN_FLASH_SIZE=0x0400000 -CONFIG_EBIU_FLASH_BASE=0x20000000 +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=m +CONFIG_MTD_PHYSMAP_START=0x20000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -647,8 +650,8 @@ CONFIG_SMC91X=y # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y # CONFIG_AX88180 is not set +CONFIG_NETDEV_10000=y # # Wireless LAN @@ -717,7 +720,6 @@ CONFIG_INPUT_EVDEV=m # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_AD5304 is not set -# CONFIG_BF5xx_FBDMA is not set # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set -- cgit v1.2.3-59-g8ed1b From 0e85e3020ebb9a1afdeaa516fe8b8f16087adac1 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 24 Dec 2007 11:57:47 +0800 Subject: [Blackfin] arch: The BF527 EZkit connects UART1/PORTF Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf527/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/blackfin/mach-bf527/Kconfig b/arch/blackfin/mach-bf527/Kconfig index 5c736837d4bf..3cde4beeb214 100644 --- a/arch/blackfin/mach-bf527/Kconfig +++ b/arch/blackfin/mach-bf527/Kconfig @@ -43,7 +43,7 @@ endchoice choice prompt "UART1" - default BF527_UART1_PORTG + default BF527_UART1_PORTF help Select PORT used for UART1. See Hardware Reference Manual -- cgit v1.2.3-59-g8ed1b From 2935077e06494638a78a02f7b4cf304e4e70eaca Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Mon, 24 Dec 2007 12:20:19 +0800 Subject: [Blackfin] arch: Fix if/def BUG - and define is multipoint NO Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf548/boards/ezkit.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 4d966eb2e998..856b9db06663 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -226,14 +226,14 @@ static struct resource musb_resources[] = { }; static struct musb_hdrc_platform_data musb_plat = { -#ifdef CONFIG_USB_MUSB_OTG +#if defined(CONFIG_USB_MUSB_OTG) .mode = MUSB_OTG, -#elif CONFIG_USB_MUSB_HDRC_HCD +#elif defined(CONFIG_USB_MUSB_HDRC_HCD) .mode = MUSB_HOST, -#elif CONFIG_USB_GADGET_MUSB_HDRC +#elif defined(CONFIG_USB_GADGET_MUSB_HDRC) .mode = MUSB_PERIPHERAL, #endif - .multipoint = 1, + .multipoint = 0, }; static u64 musb_dmamask = ~(u32)0; -- cgit v1.2.3-59-g8ed1b From 7a5f819187ff827c131721dbba11ad9596ae5e30 Mon Sep 17 00:00:00 2001 From: Javier Herrero Date: Sun, 27 Jan 2008 19:53:08 +0800 Subject: [Blackfin] arch: Added support for OpenCores Keyboard Controller to H8606 board Signed-off-by: Javier Herrero Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf533/boards/H8606.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index 675fd1c62805..a72c7a620fa1 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -346,6 +346,34 @@ static struct platform_device serial8250_device = { #endif +#if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE) + +/* + * Configuration for one OpenCores keyboard controller in FPGA at address 0x20200030, + * interrupt output wired to PF9. Change to suit different FPGA configuration + */ + +static struct resource opencores_kbd_resources[] = { + [0] = { + .start = 0x20200030, + .end = 0x20300030 + 2, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PF9, + .end = IRQ_PF9, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + }, +}; + +static struct platform_device opencores_kbd_device = { + .id = -1, + .name = "opencores-kbd", + .resource = opencores_kbd_resources, + .num_resources = ARRAY_SIZE(opencores_kbd_resources), +}; +#endif + static struct platform_device *h8606_devices[] __initdata = { #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, @@ -374,6 +402,10 @@ static struct platform_device *h8606_devices[] __initdata = { #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) &serial8250_device, #endif + +#if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE) + &opencores_kbd_device, +#endif }; static int __init H8606_init(void) -- cgit v1.2.3-59-g8ed1b From b8aab6f6dc57ca79661d291af522d2e85156519f Mon Sep 17 00:00:00 2001 From: Cliff Cai Date: Mon, 24 Dec 2007 12:33:20 +0800 Subject: [Blackfin] arch: set default value of DEB_DMA_URGENT to YES to avoid DMA aborting caused by conflict between core and DMA Signed-off-by: Cliff Cai Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf548/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig index d8bd3b49f150..1bfcd8f646ab 100644 --- a/arch/blackfin/mach-bf548/Kconfig +++ b/arch/blackfin/mach-bf548/Kconfig @@ -7,7 +7,7 @@ menu "BF548 Specific Configuration" config DEB_DMA_URGENT bool "DMA has priority over core for ext. accesses" depends on BF54x - default n + default y help Treat any DEB1, DEB2 and DEB3 request as Urgent -- cgit v1.2.3-59-g8ed1b From 3ca32c1dc62dabe67d7e51f6e8568e3965f52236 Mon Sep 17 00:00:00 2001 From: Bernd Schmidt Date: Mon, 24 Dec 2007 12:40:29 +0800 Subject: [Blackfin] arch: fix up coding style in uaccess.h Signed-off-by: Bernd Schmidt Signed-off-by: Bryan Wu --- include/asm-blackfin/uaccess.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-blackfin/uaccess.h b/include/asm-blackfin/uaccess.h index 2233f8f9314d..22a410b8003b 100644 --- a/include/asm-blackfin/uaccess.h +++ b/include/asm-blackfin/uaccess.h @@ -31,7 +31,7 @@ static inline void set_fs(mm_segment_t fs) #define VERIFY_READ 0 #define VERIFY_WRITE 1 -#define access_ok(type,addr,size) _access_ok((unsigned long)(addr),(size)) +#define access_ok(type, addr, size) _access_ok((unsigned long)(addr), (size)) static inline int is_in_rom(unsigned long addr) { -- cgit v1.2.3-59-g8ed1b From 54a1668ce53fe701f1d36651b591ced388e97275 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 24 Dec 2007 14:59:03 +0800 Subject: [Blackfin] arch: scrub dead alive/idle LED code if it does get re-added, it needs to be in the boards directory, not common code ... or it needs a re-implementation Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/Kconfig | 69 ----------------------------------------- arch/blackfin/kernel/process.c | 31 ------------------- arch/blackfin/kernel/setup.c | 2 -- arch/blackfin/kernel/time.c | 70 ------------------------------------------ 4 files changed, 172 deletions(-) diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 1364dcaccc18..e4ccdcdb4639 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -463,40 +463,6 @@ config BOOT_LOAD memory region is used to capture NULL pointer references as well as some core kernel functions. -comment "LED Status Indicators" - depends on (BFIN533_STAMP || BFIN533_BLUETECHNIX_CM) - -config BFIN_ALIVE_LED - bool "Enable Board Alive" - depends on (BFIN533_STAMP || BFIN533_BLUETECHNIX_CM) - default n - help - Blink the LEDs you select when the kernel is running. Helps detect - a hung kernel. - -config BFIN_ALIVE_LED_NUM - int "LED" - depends on BFIN_ALIVE_LED - range 1 3 if BFIN533_STAMP - default "3" if BFIN533_STAMP - help - Select the LED (marked on the board) for you to blink. - -config BFIN_IDLE_LED - bool "Enable System Load/Idle LED" - depends on (BFIN533_STAMP || BFIN533_BLUETECHNIX_CM) - default n - help - Blinks the LED you select when to determine kernel load. - -config BFIN_IDLE_LED_NUM - int "LED" - depends on BFIN_IDLE_LED - range 1 3 if BFIN533_STAMP - default "2" if BFIN533_STAMP - help - Select the LED (marked on the board) for you to blink. - choice prompt "Blackfin Exception Scratch Register" default BFIN_SCRATCH_REG_RETN @@ -543,41 +509,6 @@ config BFIN_SCRATCH_REG_CYCLES endchoice -# -# Sorry - but you need to put the hex address here - -# - -# Flag Data register -config BFIN_ALIVE_LED_PORT - hex - default 0xFFC00700 if (BFIN533_STAMP) - -# Peripheral Flag Direction Register -config BFIN_ALIVE_LED_DPORT - hex - default 0xFFC00730 if (BFIN533_STAMP) - -config BFIN_ALIVE_LED_PIN - hex - default 0x04 if (BFIN533_STAMP && BFIN_ALIVE_LED_NUM = 1) - default 0x08 if (BFIN533_STAMP && BFIN_ALIVE_LED_NUM = 2) - default 0x10 if (BFIN533_STAMP && BFIN_ALIVE_LED_NUM = 3) - -config BFIN_IDLE_LED_PORT - hex - default 0xFFC00700 if (BFIN533_STAMP) - -# Peripheral Flag Direction Register -config BFIN_IDLE_LED_DPORT - hex - default 0xFFC00730 if (BFIN533_STAMP) - -config BFIN_IDLE_LED_PIN - hex - default 0x04 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 1) - default 0x08 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 2) - default 0x10 if (BFIN533_STAMP && BFIN_IDLE_LED_NUM = 3) - endmenu diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index fff3dd9eadda..023dc80af187 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -39,9 +39,6 @@ #include #include -#define LED_ON 0 -#define LED_OFF 1 - asmlinkage void ret_from_fork(void); /* Points to the SDRAM backup memory for the stack that is currently in @@ -69,32 +66,6 @@ EXPORT_SYMBOL(pm_idle); void (*pm_power_off)(void) = NULL; EXPORT_SYMBOL(pm_power_off); -/* - * We are using a different LED from the one used to indicate timer interrupt. - */ -#if defined(CONFIG_BFIN_IDLE_LED) -static inline void leds_switch(int flag) -{ - unsigned short tmp = 0; - - tmp = bfin_read_CONFIG_BFIN_IDLE_LED_PORT(); - SSYNC(); - - if (flag == LED_ON) - tmp &= ~CONFIG_BFIN_IDLE_LED_PIN; /* light on */ - else - tmp |= CONFIG_BFIN_IDLE_LED_PIN; /* light off */ - - bfin_write_CONFIG_BFIN_IDLE_LED_PORT(tmp); - SSYNC(); - -} -#else -static inline void leds_switch(int flag) -{ -} -#endif - /* * The idle loop on BFIN */ @@ -106,12 +77,10 @@ void cpu_idle(void)__attribute__((l1_text)); void default_idle(void) { while (!need_resched()) { - leds_switch(LED_OFF); local_irq_disable(); if (likely(!need_resched())) idle_with_irq_disabled(); local_irq_enable(); - leds_switch(LED_ON); } } diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index d2822010b7ce..a03c2dfff4a3 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -315,8 +315,6 @@ void __init setup_arch(char **cmdline_p) init_mm.end_data = (unsigned long)_edata; init_mm.brk = (unsigned long)0; - init_leds(); - _bfin_swrst = bfin_read_SWRST(); if (_bfin_swrst & RESET_DOUBLE) diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c index beef057bd1dc..5bd64e341df3 100644 --- a/arch/blackfin/kernel/time.c +++ b/arch/blackfin/kernel/time.c @@ -42,75 +42,6 @@ static void time_sched_init(irqreturn_t(*timer_routine) (int, void *)); static unsigned long gettimeoffset(void); -static inline void do_leds(void); - -#if (defined(CONFIG_BFIN_ALIVE_LED) || defined(CONFIG_BFIN_IDLE_LED)) -void __init init_leds(void) -{ - unsigned int tmp = 0; - -#if defined(CONFIG_BFIN_ALIVE_LED) - /* config pins as output. */ - tmp = bfin_read_CONFIG_BFIN_ALIVE_LED_DPORT(); - SSYNC(); - bfin_write_CONFIG_BFIN_ALIVE_LED_DPORT(tmp | CONFIG_BFIN_ALIVE_LED_PIN); - SSYNC(); - - /* First set led be off */ - tmp = bfin_read_CONFIG_BFIN_ALIVE_LED_PORT(); - SSYNC(); - bfin_write_CONFIG_BFIN_ALIVE_LED_PORT(tmp | CONFIG_BFIN_ALIVE_LED_PIN); /* light off */ - SSYNC(); -#endif - -#if defined(CONFIG_BFIN_IDLE_LED) - /* config pins as output. */ - tmp = bfin_read_CONFIG_BFIN_IDLE_LED_DPORT(); - SSYNC(); - bfin_write_CONFIG_BFIN_IDLE_LED_DPORT(tmp | CONFIG_BFIN_IDLE_LED_PIN); - SSYNC(); - - /* First set led be off */ - tmp = bfin_read_CONFIG_BFIN_IDLE_LED_PORT(); - SSYNC(); - bfin_write_CONFIG_BFIN_IDLE_LED_PORT(tmp | CONFIG_BFIN_IDLE_LED_PIN); /* light off */ - SSYNC(); -#endif -} -#else -void __init init_leds(void) -{ -} -#endif - -#if defined(CONFIG_BFIN_ALIVE_LED) -static inline void do_leds(void) -{ - static unsigned int count = 50; - static int flag; - unsigned short tmp = 0; - - if (--count == 0) { - count = 50; - flag = ~flag; - } - tmp = bfin_read_CONFIG_BFIN_ALIVE_LED_PORT(); - SSYNC(); - - if (flag) - tmp &= ~CONFIG_BFIN_ALIVE_LED_PIN; /* light on */ - else - tmp |= CONFIG_BFIN_ALIVE_LED_PIN; /* light off */ - - bfin_write_CONFIG_BFIN_ALIVE_LED_PORT(tmp); - SSYNC(); - -} -#else -static inline void do_leds(void) -{ -} -#endif static struct irqaction bfin_timer_irq = { .name = "BFIN Timer Tick", @@ -205,7 +136,6 @@ irqreturn_t timer_interrupt(int irq, void *dummy) write_seqlock(&xtime_lock); do_timer(1); - do_leds(); #ifndef CONFIG_SMP update_process_times(user_mode(get_irq_regs())); -- cgit v1.2.3-59-g8ed1b From 1545a1111a02b5aafe6f141e133a6269c5741285 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 24 Dec 2007 16:54:48 +0800 Subject: [Blackfin] arch: add support for BF523/BF524/BF526 Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/Kconfig | 26 +++++++++++++++++++++++--- arch/blackfin/Makefile | 6 ++++++ arch/blackfin/kernel/bfin_gpio.c | 34 ++++++++++++++++++++++++++++++++++ 3 files changed, 63 insertions(+), 3 deletions(-) diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index e4ccdcdb4639..a241a0a27de2 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -85,11 +85,26 @@ config BF522 help BF522 Processor Support. +config BF523 + bool "BF523" + help + BF523 Processor Support. + +config BF524 + bool "BF524" + help + BF524 Processor Support. + config BF525 bool "BF525" help BF525 Processor Support. +config BF526 + bool "BF526" + help + BF526 Processor Support. + config BF527 bool "BF527" help @@ -198,7 +213,7 @@ endchoice config BF52x bool - depends on (BF522 || BF525 || BF527) + depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527) default y config BF53x @@ -371,7 +386,10 @@ config SCLK_DIV config MAX_VCO_HZ int default 600000000 if BF522 + default 400000000 if BF523 + default 400000000 if BF524 default 600000000 if BF525 + default 400000000 if BF526 default 600000000 if BF527 default 400000000 if BF531 default 400000000 if BF532 @@ -383,6 +401,8 @@ config MAX_VCO_HZ default 533333333 if BF539 default 600000000 if BF542 default 533333333 if BF544 + default 600000000 if BF547 + default 600000000 if BF548 default 533333333 if BF549 default 600000000 if BF561 @@ -897,8 +917,8 @@ config PM_WAKEUP_SIC_IWR depends on PM_WAKEUP_GPIO_BY_SIC_IWR default 0x80000000 if (BF537 || BF536 || BF534) default 0x100000 if (BF533 || BF532 || BF531) - default 0x800000 if (BF549 || BF548 || BF547 || BF542) - default 0x800000 if (BF527 || BF524 || BF522) + default 0x800000 if (BF54x) + default 0x800000 if (BF52x) config PM_WAKEUP_GPIO_NUMBER int "Wakeup GPIO number" diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index c47e000f8324..0c9680eac8ef 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -21,7 +21,10 @@ KBUILD_DEFCONFIG := BF537-STAMP_defconfig # setup the machine name and the machine dependent settings machine-$(CONFIG_BF522) := bf527 +machine-$(CONFIG_BF523) := bf527 +machine-$(CONFIG_BF524) := bf527 machine-$(CONFIG_BF525) := bf527 +machine-$(CONFIG_BF526) := bf527 machine-$(CONFIG_BF527) := bf527 machine-$(CONFIG_BF531) := bf533 machine-$(CONFIG_BF532) := bf533 @@ -39,7 +42,10 @@ MACHINE := $(machine-y) export MACHINE cpu-$(CONFIG_BF522) := bf522 +cpu-$(CONFIG_BF523) := bf523 +cpu-$(CONFIG_BF524) := bf524 cpu-$(CONFIG_BF525) := bf525 +cpu-$(CONFIG_BF526) := bf526 cpu-$(CONFIG_BF527) := bf527 cpu-$(CONFIG_BF531) := bf531 cpu-$(CONFIG_BF532) := bf532 diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index ce85d4bf34ca..ea13d2a22d69 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -83,6 +83,7 @@ #include #include #include +#include #include #include #include @@ -1194,3 +1195,36 @@ void bfin_gpio_reset_spi0_ssel1(void) } #endif /*BF548_FAMILY */ + +#if defined(CONFIG_PROC_FS) +static int gpio_proc_read(char *buf, char **start, off_t offset, + int len, int *unused_i, void *unused_v) +{ + int c, outlen = 0; + + for (c = 0; c < MAX_RESOURCES; c++) { + if (!check_gpio(c) && (reserved_gpio_map[gpio_bank(c)] & gpio_bit(c))) + len = sprintf(buf, "GPIO_%d: %s \tGPIO %s\n", c, + get_label(c), get_gpio_dir(c) ? "OUTPUT" : "INPUT"); + else if (reserved_peri_map[gpio_bank(c)] & gpio_bit(c)) + len = sprintf(buf, "GPIO_%d: %s \tPeripheral\n", c, get_label(c)); + else + continue; + buf += len; + outlen += len; + } + return outlen; +} + +static __init int gpio_register_proc(void) +{ + struct proc_dir_entry *proc_gpio; + + proc_gpio = create_proc_entry("gpio", S_IRUGO, NULL); + if (proc_gpio) + proc_gpio->read_proc = gpio_proc_read; + return proc_gpio != NULL; +} + +__initcall(gpio_register_proc); +#endif -- cgit v1.2.3-59-g8ed1b From fac3cf432ef9b6bfd64b35b95afe0b7e0079da74 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 24 Dec 2007 20:07:03 +0800 Subject: [Blackfin] arch: Fix gpio label handling early serial init also utilizes the peripheral request api - however at this point bfin_gpio_init didn't allocate memory for the labels. So we always have two zombies (allocated pin functions without labels) This happens before the initcalls - We now allocate memory statically. Define MAX_RESOURCES individually for each cpu. Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/kernel/bfin_gpio.c | 31 ++++++++++++++++++------------- include/asm-blackfin/mach-bf527/portmux.h | 2 ++ include/asm-blackfin/mach-bf533/portmux.h | 2 ++ include/asm-blackfin/mach-bf537/portmux.h | 2 ++ include/asm-blackfin/mach-bf548/portmux.h | 2 ++ include/asm-blackfin/mach-bf561/portmux.h | 2 ++ 6 files changed, 28 insertions(+), 13 deletions(-) diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index ea13d2a22d69..ffee36910288 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -179,15 +179,13 @@ static struct gpio_port_t *gpio_array[gpio_bank(MAX_BLACKFIN_GPIOS)] = { #endif static unsigned short reserved_gpio_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; -static unsigned short reserved_peri_map[gpio_bank(MAX_BLACKFIN_GPIOS + 16)]; +static unsigned short reserved_peri_map[gpio_bank(MAX_RESOURCES)]; -#define MAX_RESOURCES 256 #define RESOURCE_LABEL_SIZE 16 -struct str_ident { +static struct str_ident { char name[RESOURCE_LABEL_SIZE]; -} *str_ident; - +} str_ident[MAX_RESOURCES]; #ifdef CONFIG_PM static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; @@ -251,6 +249,11 @@ static char *get_label(unsigned short ident) static int cmp_label(unsigned short ident, const char *label) { + if (label == NULL) { + dump_stack(); + printk(KERN_ERR "Please provide none-null label\n"); + } + if (label && str_ident) return strncmp(str_ident[ident].name, label, strlen(label)); @@ -419,12 +422,6 @@ static void default_gpio(unsigned short gpio) static int __init bfin_gpio_init(void) { - str_ident = kcalloc(MAX_RESOURCES, - sizeof(struct str_ident), GFP_KERNEL); - if (str_ident == NULL) - return -ENOMEM; - - memset(str_ident, 0, MAX_RESOURCES * sizeof(struct str_ident)); printk(KERN_INFO "Blackfin GPIO Controller\n"); @@ -785,6 +782,14 @@ void gpio_pm_restore(void) } #endif +#else /* BF548_FAMILY */ + +unsigned short get_gpio_dir(unsigned short gpio) +{ + return (0x01 & (gpio_array[gpio_bank(gpio)]->port_dir_clear >> gpio_sub_n(gpio))); +} +EXPORT_SYMBOL(get_gpio_dir); + #endif /* BF548_FAMILY */ /*********************************************************** @@ -1204,10 +1209,10 @@ static int gpio_proc_read(char *buf, char **start, off_t offset, for (c = 0; c < MAX_RESOURCES; c++) { if (!check_gpio(c) && (reserved_gpio_map[gpio_bank(c)] & gpio_bit(c))) - len = sprintf(buf, "GPIO_%d: %s \tGPIO %s\n", c, + len = sprintf(buf, "GPIO_%d: %s \t\tGPIO %s\n", c, get_label(c), get_gpio_dir(c) ? "OUTPUT" : "INPUT"); else if (reserved_peri_map[gpio_bank(c)] & gpio_bit(c)) - len = sprintf(buf, "GPIO_%d: %s \tPeripheral\n", c, get_label(c)); + len = sprintf(buf, "GPIO_%d: %s \t\tPeripheral\n", c, get_label(c)); else continue; buf += len; diff --git a/include/asm-blackfin/mach-bf527/portmux.h b/include/asm-blackfin/mach-bf527/portmux.h index dcf001adc63c..ae4d205bfcf5 100644 --- a/include/asm-blackfin/mach-bf527/portmux.h +++ b/include/asm-blackfin/mach-bf527/portmux.h @@ -1,6 +1,8 @@ #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS + #define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0)) #define P_PPI0_D1 (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0)) #define P_PPI0_D2 (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0)) diff --git a/include/asm-blackfin/mach-bf533/portmux.h b/include/asm-blackfin/mach-bf533/portmux.h index 137f4884acfe..685a2651dcda 100644 --- a/include/asm-blackfin/mach-bf533/portmux.h +++ b/include/asm-blackfin/mach-bf533/portmux.h @@ -1,6 +1,8 @@ #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS + #define P_PPI0_CLK (P_DONTCARE) #define P_PPI0_FS1 (P_DONTCARE) #define P_PPI0_FS2 (P_DONTCARE) diff --git a/include/asm-blackfin/mach-bf537/portmux.h b/include/asm-blackfin/mach-bf537/portmux.h index 5a3f7d3bf73d..78fee6e0f237 100644 --- a/include/asm-blackfin/mach-bf537/portmux.h +++ b/include/asm-blackfin/mach-bf537/portmux.h @@ -1,6 +1,8 @@ #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ +#define MAX_RESOURCES (MAX_BLACKFIN_GPIOS + GPIO_BANKSIZE) /* We additionally handle PORTJ */ + #define P_UART0_TX (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0)) #define P_UART0_RX (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0)) #define P_UART1_TX (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0)) diff --git a/include/asm-blackfin/mach-bf548/portmux.h b/include/asm-blackfin/mach-bf548/portmux.h index 6b485120015f..8177a567dcdb 100644 --- a/include/asm-blackfin/mach-bf548/portmux.h +++ b/include/asm-blackfin/mach-bf548/portmux.h @@ -1,6 +1,8 @@ #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS + #define P_SPORT2_TFS (P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(0)) #define P_SPORT2_DTSEC (P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(0)) #define P_SPORT2_DTPRI (P_DEFINED | P_IDENT(GPIO_PA2) | P_FUNCT(0)) diff --git a/include/asm-blackfin/mach-bf561/portmux.h b/include/asm-blackfin/mach-bf561/portmux.h index 132ad31665e3..a6ee8206efb6 100644 --- a/include/asm-blackfin/mach-bf561/portmux.h +++ b/include/asm-blackfin/mach-bf561/portmux.h @@ -1,6 +1,8 @@ #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS + #define P_PPI0_CLK (P_DONTCARE) #define P_PPI0_FS1 (P_DONTCARE) #define P_PPI0_FS2 (P_DONTCARE) -- cgit v1.2.3-59-g8ed1b From 6fce6a8d6940654b48d3d540627c7ee790a03b80 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 24 Dec 2007 16:56:12 +0800 Subject: [Blackfin] arch: append IRQ Number to label string Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/ints-priority-dc.c | 10 ++++++---- arch/blackfin/mach-common/ints-priority-sc.c | 17 +++++++++++++---- 2 files changed, 19 insertions(+), 8 deletions(-) diff --git a/arch/blackfin/mach-common/ints-priority-dc.c b/arch/blackfin/mach-common/ints-priority-dc.c index 4882f0e801a9..8d18d6b163bb 100644 --- a/arch/blackfin/mach-common/ints-priority-dc.c +++ b/arch/blackfin/mach-common/ints-priority-dc.c @@ -222,11 +222,12 @@ static void bf561_gpio_unmask_irq(unsigned int irq) static unsigned int bf561_gpio_irq_startup(unsigned int irq) { unsigned int ret; + char buf[8]; u16 gpionr = irq - IRQ_PF0; if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - - ret = gpio_request(gpionr, "IRQ"); + snprintf(buf, sizeof buf, "IRQ %d", irq); + ret = gpio_request(gpionr, buf); if (ret) return ret; @@ -250,6 +251,7 @@ static int bf561_gpio_irq_type(unsigned int irq, unsigned int type) { unsigned int ret; + char buf[8]; u16 gpionr = irq - IRQ_PF0; @@ -265,8 +267,8 @@ static int bf561_gpio_irq_type(unsigned int irq, unsigned int type) IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - - ret = gpio_request(gpionr, "IRQ"); + snprintf(buf, sizeof buf, "IRQ %d", irq); + ret = gpio_request(gpionr, buf); if (ret) return ret; diff --git a/arch/blackfin/mach-common/ints-priority-sc.c b/arch/blackfin/mach-common/ints-priority-sc.c index 147f0731087a..36ef4d17dd35 100644 --- a/arch/blackfin/mach-common/ints-priority-sc.c +++ b/arch/blackfin/mach-common/ints-priority-sc.c @@ -313,6 +313,7 @@ static void bfin_demux_error_irq(unsigned int int_err_irq, static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)]; static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)]; + static void bfin_gpio_ack_irq(unsigned int irq) { u16 gpionr = irq - IRQ_PF0; @@ -352,9 +353,11 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq) { unsigned int ret; u16 gpionr = irq - IRQ_PF0; + char buf[8]; if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - ret = gpio_request(gpionr, "IRQ"); + snprintf(buf, sizeof buf, "IRQ %d", irq); + ret = gpio_request(gpionr, buf); if (ret) return ret; } @@ -376,6 +379,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) { unsigned int ret; + char buf[8]; u16 gpionr = irq - IRQ_PF0; if (type == IRQ_TYPE_PROBE) { @@ -388,7 +392,8 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - ret = gpio_request(gpionr, "IRQ"); + snprintf(buf, sizeof buf, "IRQ %d", irq); + ret = gpio_request(gpionr, buf); if (ret) return ret; } @@ -587,6 +592,7 @@ static void bfin_gpio_unmask_irq(unsigned int irq) static unsigned int bfin_gpio_irq_startup(unsigned int irq) { unsigned int ret; + char buf[8]; u16 gpionr = irq - IRQ_PA0; u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; @@ -598,7 +604,8 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq) } if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - ret = gpio_request(gpionr, "IRQ"); + snprintf(buf, sizeof buf, "IRQ %d", irq); + ret = gpio_request(gpionr, buf); if (ret) return ret; } @@ -620,6 +627,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) { unsigned int ret; + char buf[8]; u16 gpionr = irq - IRQ_PA0; u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; u32 pintbit = PINT_BIT(pint_val); @@ -638,7 +646,8 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) { if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { - ret = gpio_request(gpionr, "IRQ"); + snprintf(buf, sizeof buf, "IRQ %d", irq); + ret = gpio_request(gpionr, buf); if (ret) return ret; } -- cgit v1.2.3-59-g8ed1b From 2463ef22bf8b6e22048bd26f940c014f7e1f0998 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Sun, 27 Jan 2008 16:49:48 +0800 Subject: [Blackfin] arch: replace current blackfin specific pfbutton driver with kernel generic gpio key driver Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf533/boards/ezkit.c | 28 ++++++++++++++++++++++++++++ arch/blackfin/mach-bf533/boards/stamp.c | 27 +++++++++++++++++++++++++++ arch/blackfin/mach-bf537/boards/stamp.c | 28 ++++++++++++++++++++++++++++ arch/blackfin/mach-bf548/boards/ezkit.c | 27 +++++++++++++++++++++++++++ arch/blackfin/mach-bf561/boards/ezkit.c | 30 ++++++++++++++++++++++++++++++ 5 files changed, 140 insertions(+) diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index be852034a68b..ead5c12cbe90 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -256,6 +256,30 @@ static struct platform_device bfin_pata_device = { }; #endif +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include +#include + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PF7, 1, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PF8, 1, "gpio-keys: BTN1"}, + {BTN_2, GPIO_PF9, 1, "gpio-keys: BTN2"}, + {BTN_3, GPIO_PF10, 1, "gpio-keys: BTN3"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, @@ -280,6 +304,10 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) &bfin_pata_device, #endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif }; static int __init ezkit_init(void) diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 8fde8d832850..689816937703 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -373,6 +373,29 @@ static struct platform_device bfin_pata_device = { }; #endif +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include +#include + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PF5, 1, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PF6, 1, "gpio-keys: BTN1"}, + {BTN_2, GPIO_PF8, 1, "gpio-keys: BTN2"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, @@ -406,6 +429,10 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) &bfin_pata_device, #endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif }; static int __init stamp_init(void) diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 07b0dc273d2f..3e0ad04d8d75 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -103,6 +103,30 @@ void __exit bfin_isp1761_exit(void) arch_initcall(bfin_isp1761_init); #endif +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include +#include + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PF2, 1, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PF3, 1, "gpio-keys: BTN1"}, + {BTN_2, GPIO_PF4, 1, "gpio-keys: BTN2"}, + {BTN_3, GPIO_PF5, 1, "gpio-keys: BTN3"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) static struct resource bfin_pcmcia_cf_resources[] = { { @@ -738,6 +762,10 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) &bfin_pata_device, #endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif }; static int __init stamp_init(void) diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 856b9db06663..4ca3288fd07c 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -514,6 +514,29 @@ static struct platform_device i2c_bfin_twi1_device = { #endif #endif +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PB8, 1, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PB9, 1, "gpio-keys: BTN1"}, + {BTN_2, GPIO_PB10, 1, "gpio-keys: BTN2"}, + {BTN_3, GPIO_PB11, 1, "gpio-keys: BTN3"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, @@ -562,6 +585,10 @@ static struct platform_device *ezkit_devices[] __initdata = { &i2c_bfin_twi1_device, #endif #endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif }; static int __init stamp_init(void) diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 4ff8f6e7a11f..edfceb08a7d5 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -246,6 +246,30 @@ static struct platform_device bfin_pata_device = { }; #endif +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include +#include + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PF5, 1, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PF6, 1, "gpio-keys: BTN1"}, + {BTN_2, GPIO_PF7, 1, "gpio-keys: BTN2"}, + {BTN_3, GPIO_PF8, 1, "gpio-keys: BTN3"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, @@ -258,12 +282,18 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) &bfin_spi0_device, #endif + #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif + #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) &bfin_pata_device, #endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif }; static int __init ezkit_init(void) -- cgit v1.2.3-59-g8ed1b From 471b9a6c7304d5f59503d111e71e60a7e19fb9a0 Mon Sep 17 00:00:00 2001 From: Martin Strubel Date: Sun, 27 Jan 2008 19:54:20 +0800 Subject: [Blackfin] arch: added Minotaur BSP Signed-off-by: Martin Strubel Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf537/boards/Kconfig | 6 + arch/blackfin/mach-bf537/boards/Makefile | 1 + arch/blackfin/mach-bf537/boards/minotaur.c | 317 +++++++++++++++++++++++++++++ 3 files changed, 324 insertions(+) create mode 100644 arch/blackfin/mach-bf537/boards/minotaur.c diff --git a/arch/blackfin/mach-bf537/boards/Kconfig b/arch/blackfin/mach-bf537/boards/Kconfig index 96a15196e416..7e789dbef036 100644 --- a/arch/blackfin/mach-bf537/boards/Kconfig +++ b/arch/blackfin/mach-bf537/boards/Kconfig @@ -21,6 +21,12 @@ config PNAV10 help PNAV board support. +config CAMSIG_MINOTAUR + bool "Cambridge Signal Processing LTD Minotaur" + depends on (BF537) + help + Board supply package for CSP Minotaur + config GENERIC_BF537_BOARD bool "Generic" help diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile index 94a85174283a..87e450f29e37 100644 --- a/arch/blackfin/mach-bf537/boards/Makefile +++ b/arch/blackfin/mach-bf537/boards/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o obj-$(CONFIG_BFIN537_STAMP) += stamp.o led.o obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o obj-$(CONFIG_PNAV10) += pnav10.o +obj-$(CONFIG_CAMSIG_MINOTAUR) += minotaur.o diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c new file mode 100644 index 000000000000..b8bbba85af53 --- /dev/null +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -0,0 +1,317 @@ +/* + */ + +#include +#include +#include +#include +#include +#include +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#include +#endif +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Name the Board for the /proc/cpuinfo + */ +char *bfin_board_name = "CamSig Minotaur BF537"; + +#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +static struct resource bfin_pcmcia_cf_resources[] = { + { + .start = 0x20310000, /* IO PORT */ + .end = 0x20312000, + .flags = IORESOURCE_MEM, + }, { + .start = 0x20311000, /* Attribute Memory */ + .end = 0x20311FFF, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PF4, + .end = IRQ_PF4, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, { + .start = IRQ_PF6, /* Card Detect PF6 */ + .end = IRQ_PF6, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pcmcia_cf_device = { + .name = "bfin_cf_pcmcia", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources), + .resource = bfin_pcmcia_cf_resources, +}; +#endif + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mac_device = { + .name = "bfin_mac", +}; +#endif + +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +static struct resource net2272_bfin_resources[] = { + { + .start = 0x20300000, + .end = 0x20300000 + 0x100, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device net2272_bfin_device = { + .name = "net2272", + .id = -1, + .num_resources = ARRAY_SIZE(net2272_bfin_resources), + .resource = net2272_bfin_resources, +}; +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* all SPI peripherals info goes here */ + +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) + +/* Partition sizes */ +#define FLASH_SIZE 0x00400000 +#define PSIZE_UBOOT 0x00030000 +#define PSIZE_INITRAMFS 0x00240000 + +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "uboot", + .size = PSIZE_UBOOT, + .offset = 0x000000, + .mask_flags = MTD_CAP_ROM + }, { + .name = "initramfs", + .size = PSIZE_INITRAMFS, + .offset = PSIZE_UBOOT + }, { + .name = "opt", + .size = FLASH_SIZE - (PSIZE_UBOOT + PSIZE_INITRAMFS), + .offset = PSIZE_UBOOT + PSIZE_INITRAMFS, + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "m25p64", +}; + +/* SPI flash chip (m25p64) */ +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, + .bits_per_word = 8, +}; +#endif + +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc_dummy", + .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 0, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "spi_mmc", + .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, +#endif +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master bfin_spi0_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ +}; + +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, + .dev = { + .platform_data = &bfin_spi0_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_REGBASE, + .end = TWI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI, + .end = IRQ_TWI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi_device = { + .name = "i2c-bfin-twi", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, +}; +#endif + +static struct platform_device *minotaur_devices[] __initdata = { +#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) + &bfin_pcmcia_cf_device, +#endif + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mac_device, +#endif + +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) + &net2272_bfin_device, +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &bfin_spi0_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) + &i2c_bfin_twi_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) + &bfin_sport0_uart_device, + &bfin_sport1_uart_device, +#endif + +}; + +static int __init minotaur_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + platform_add_devices(minotaur_devices, ARRAY_SIZE(minotaur_devices)); +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + spi_register_board_info(bfin_spi_board_info, + ARRAY_SIZE(bfin_spi_board_info)); +#endif + + return 0; +} + +arch_initcall(minotaur_init); + +void native_machine_restart(char *cmd) +{ + /* workaround reboot hang when booting from SPI */ + if ((bfin_read_SYSCR() & 0x7) == 0x3) + bfin_gpio_reset_spi0_ssel1(); +} -- cgit v1.2.3-59-g8ed1b From 8baf560b4c901fb554d15e056aaa7f34b2345be5 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 24 Dec 2007 18:51:34 +0800 Subject: [Blackfin] arch: Enable both edge triggered GPIO IRQs on BF54x and use irq_to_gpio() Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/ints-priority-sc.c | 67 +++++++++++++++++++--------- 1 file changed, 46 insertions(+), 21 deletions(-) diff --git a/arch/blackfin/mach-common/ints-priority-sc.c b/arch/blackfin/mach-common/ints-priority-sc.c index 36ef4d17dd35..dec42acb5de0 100644 --- a/arch/blackfin/mach-common/ints-priority-sc.c +++ b/arch/blackfin/mach-common/ints-priority-sc.c @@ -483,6 +483,10 @@ static void bfin_demux_gpio_irq(unsigned int intb_irq, static unsigned char irq2pint_lut[NR_PINTS]; static unsigned char pint2irq_lut[NR_PINT_SYS_IRQS * NR_PINT_BITS]; +static unsigned int gpio_both_edge_triggered[NR_PINT_SYS_IRQS]; +static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)]; + + struct pin_int_t { unsigned int mask_set; unsigned int mask_clear; @@ -549,13 +553,20 @@ void init_pint_lut(void) } -static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)]; - static void bfin_gpio_ack_irq(unsigned int irq) { u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; + u32 pintbit = PINT_BIT(pint_val); + u8 bank = PINT_2_BANK(pint_val); + + if (unlikely(gpio_both_edge_triggered[bank] & pintbit)) { + if (pint[bank]->invert_set & pintbit) + pint[bank]->invert_clear = pintbit; + else + pint[bank]->invert_set = pintbit; + } + pint[bank]->request = pintbit; - pint[PINT_2_BANK(pint_val)]->request = PINT_BIT(pint_val); SSYNC(); } @@ -565,6 +576,13 @@ static void bfin_gpio_mask_ack_irq(unsigned int irq) u32 pintbit = PINT_BIT(pint_val); u8 bank = PINT_2_BANK(pint_val); + if (unlikely(gpio_both_edge_triggered[bank] & pintbit)) { + if (pint[bank]->invert_set & pintbit) + pint[bank]->invert_clear = pintbit; + else + pint[bank]->invert_set = pintbit; + } + pint[bank]->request = pintbit; pint[bank]->mask_clear = pintbit; SSYNC(); @@ -593,7 +611,7 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq) { unsigned int ret; char buf[8]; - u16 gpionr = irq - IRQ_PA0; + u16 gpionr = irq_to_gpio(irq); u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; if (pint_val == IRQ_NOT_AVAIL) { @@ -618,9 +636,11 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq) static void bfin_gpio_irq_shutdown(unsigned int irq) { + u16 gpionr = irq_to_gpio(irq); + bfin_gpio_mask_irq(irq); - gpio_free(irq - IRQ_PA0); - gpio_enabled[gpio_bank(irq - IRQ_PA0)] &= ~gpio_bit(irq - IRQ_PA0); + gpio_free(gpionr); + gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr); } static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) @@ -628,7 +648,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) unsigned int ret; char buf[8]; - u16 gpionr = irq - IRQ_PA0; + u16 gpionr = irq_to_gpio(irq); u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; u32 pintbit = PINT_BIT(pint_val); u8 bank = PINT_2_BANK(pint_val); @@ -660,28 +680,33 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type) gpio_direction_input(gpionr); - if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { - pint[bank]->edge_set = pintbit; - } else { - pint[bank]->edge_clear = pintbit; - } - if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW))) pint[bank]->invert_set = pintbit; /* low or falling edge denoted by one */ else - pint[bank]->invert_set = pintbit; /* high or rising edge denoted by zero */ + pint[bank]->invert_clear = pintbit; /* high or rising edge denoted by zero */ - if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) - pint[bank]->invert_set = pintbit; - else - pint[bank]->invert_set = pintbit; + if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) + == (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { - SSYNC(); + gpio_both_edge_triggered[bank] |= pintbit; - if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) + if (gpio_get_value(gpionr)) + pint[bank]->invert_set = pintbit; + else + pint[bank]->invert_clear = pintbit; + } else { + gpio_both_edge_triggered[bank] &= ~pintbit; + } + + if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) { + pint[bank]->edge_set = pintbit; set_irq_handler(irq, handle_edge_irq); - else + } else { + pint[bank]->edge_clear = pintbit; set_irq_handler(irq, handle_level_irq); + } + + SSYNC(); return 0; } -- cgit v1.2.3-59-g8ed1b From 7285846ff8d09879cacac5c6d40fc8e8443c7cf0 Mon Sep 17 00:00:00 2001 From: Martin Strubel Date: Mon, 24 Dec 2007 19:12:32 +0800 Subject: [Blackfin] arch: disable bfin_get_ether_addr fucntion for boards when do not use MAC driver Signed-off-by: Martin Strubel Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf537/boards/generic_board.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index 09f4bfbd2350..7fd873f59242 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -733,9 +733,11 @@ void native_machine_restart(char *cmd) bfin_gpio_reset_spi0_ssel1(); } +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) void bfin_get_ether_addr(char *addr) { random_ether_addr(addr); printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__); } EXPORT_SYMBOL(bfin_get_ether_addr); +#endif -- cgit v1.2.3-59-g8ed1b From 43f73fef07eb70be7d508b34eeddf5985e300bb1 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 24 Dec 2007 19:35:35 +0800 Subject: [Blackfin] arch: pull in linux/etherdevice.h for random_ether_addr() used in bfin_get_ether_addr() Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf537/boards/cm_bf537.c | 1 + arch/blackfin/mach-bf537/boards/generic_board.c | 1 + arch/blackfin/mach-bf537/boards/pnav10.c | 1 + 3 files changed, 3 insertions(+) diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index a102615cac7c..8703b67d5ec6 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -29,6 +29,7 @@ */ #include +#include #include #include #include diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index 7fd873f59242..1c97219a2ab5 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -29,6 +29,7 @@ */ #include +#include #include #include #include diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index fd5f4a6f08e4..23e10c7dab5b 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -29,6 +29,7 @@ */ #include +#include #include #include #include -- cgit v1.2.3-59-g8ed1b From 37931db5bdce35d37a9bdf93082604620ba3341a Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Mon, 24 Dec 2007 19:43:39 +0800 Subject: [Blackfin] arch: Restore default DMA priority over core on bf54x. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- arch/blackfin/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index a241a0a27de2..ce521a921bee 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -774,7 +774,6 @@ config C_AMCKEN config C_CDPRIO bool "DMA has priority over core for ext. accesses" - depends on !BF54x default n config C_B0PEN -- cgit v1.2.3-59-g8ed1b From 76a7f4049277691b9b800a23dc09009374cdaa21 Mon Sep 17 00:00:00 2001 From: Enrik Berkhan Date: Mon, 24 Dec 2007 19:51:31 +0800 Subject: [Blackfin] arch: fix bug when DMA operation related core B of BF561 - Before DMA'ing data to core B L1 memory, caches have to be flushed. - Before DMA'ing data from core B L1 memory, caches have to be invalidated. - Fix lock/unlock. Signed-off-by: Enrik Berkhan Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf561/coreb.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/blackfin/mach-bf561/coreb.c b/arch/blackfin/mach-bf561/coreb.c index 5d1d21b4c2a7..1b44e9e6dc3b 100644 --- a/arch/blackfin/mach-bf561/coreb.c +++ b/arch/blackfin/mach-bf561/coreb.c @@ -33,7 +33,9 @@ #include #include #include +#include #include +#include #define MODULE_VER "v0.1" @@ -90,11 +92,12 @@ static ssize_t coreb_write(struct file *file, const char *buf, size_t count, coreb_dma_done = 0; + flush_dcache_range((unsigned long)buf, (unsigned long)(buf+len)); /* Source Channel */ set_dma_start_addr(CH_MEM_STREAM2_SRC, (unsigned long)buf); set_dma_x_count(CH_MEM_STREAM2_SRC, len); set_dma_x_modify(CH_MEM_STREAM2_SRC, sizeof(char)); - set_dma_config(CH_MEM_STREAM2_SRC, RESTART); + set_dma_config(CH_MEM_STREAM2_SRC, 0); /* Destination Channel */ set_dma_start_addr(CH_MEM_STREAM2_DEST, coreb_base + p); set_dma_x_count(CH_MEM_STREAM2_DEST, len); @@ -135,11 +138,12 @@ static ssize_t coreb_read(struct file *file, char *buf, size_t count, coreb_dma_done = 0; + invalidate_dcache_range((unsigned long)buf, (unsigned long)(buf+len)); /* Source Channel */ set_dma_start_addr(CH_MEM_STREAM2_SRC, coreb_base + p); set_dma_x_count(CH_MEM_STREAM2_SRC, len); set_dma_x_modify(CH_MEM_STREAM2_SRC, sizeof(char)); - set_dma_config(CH_MEM_STREAM2_SRC, RESTART); + set_dma_config(CH_MEM_STREAM2_SRC, 0); /* Destination Channel */ set_dma_start_addr(CH_MEM_STREAM2_DEST, (unsigned long)buf); set_dma_x_count(CH_MEM_STREAM2_DEST, len); @@ -266,7 +270,7 @@ static int coreb_ioctl(struct inode *inode, struct file *file, coreb_status |= COREB_IS_RUNNING; bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() & ~0x0020); SSYNC(); - spin_lock_irq(&coreb_lock); + spin_unlock_irq(&coreb_lock); break; #if defined(CONFIG_BF561_COREB_RESET) case CMD_COREB_STOP: @@ -275,7 +279,7 @@ static int coreb_ioctl(struct inode *inode, struct file *file, bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() | 0x0020); bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080); coreb_status &= ~COREB_IS_RUNNING; - spin_lock_irq(&coreb_lock); + spin_unlock_irq(&coreb_lock); break; case CMD_COREB_RESET: printk(KERN_INFO "Resetting Core B\n"); -- cgit v1.2.3-59-g8ed1b -- cgit v1.2.3-59-g8ed1b From 79f1ec862ae2e693b85fd7c94654ba1779ff5863 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 24 Dec 2007 20:03:51 +0800 Subject: [Blackfin] arch: Spelling fixes Signed-off-by: Joe Perches Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/early_printk.c | 2 +- arch/blackfin/mach-bf548/ints-priority.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/blackfin/kernel/early_printk.c b/arch/blackfin/kernel/early_printk.c index c892777267d5..60f67f90fe35 100644 --- a/arch/blackfin/kernel/early_printk.c +++ b/arch/blackfin/kernel/early_printk.c @@ -187,7 +187,7 @@ asmlinkage void __init init_early_exception_vectors(void) bfin_write_EVT15(early_trap); CSYNC(); - /* Set all the return from interupt, exception, NMI to a known place + /* Set all the return from interrupt, exception, NMI to a known place * so if we do a RETI, RETX or RETN by mistake - we go somewhere known * Note - don't change RETS - we are in a subroutine, or * RETE - since it might screw up if emulator is attached diff --git a/arch/blackfin/mach-bf548/ints-priority.c b/arch/blackfin/mach-bf548/ints-priority.c index 05e3b3cb4c0a..2665653cee37 100644 --- a/arch/blackfin/mach-bf548/ints-priority.c +++ b/arch/blackfin/mach-bf548/ints-priority.c @@ -4,7 +4,7 @@ * Author: Michael Hennerich * * Created: - * Description: Set up the interupt priorities + * Description: Set up the interrupt priorities * * Modified: * Copyright 2004-2006 Analog Devices Inc. -- cgit v1.2.3-59-g8ed1b From 7cc1c4b2c44d7807f55da6a36f5b2e49977c67b7 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 24 Dec 2007 20:05:09 +0800 Subject: [Blackfin] arch: update to latest anomaly sheets Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- include/asm-blackfin/mach-bf533/anomaly.h | 12 ++++--- include/asm-blackfin/mach-bf537/anomaly.h | 14 +++++--- include/asm-blackfin/mach-bf548/anomaly.h | 54 +++++++++++++++++++------------ include/asm-blackfin/mach-bf561/anomaly.h | 18 +++++++++-- 4 files changed, 67 insertions(+), 31 deletions(-) diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/include/asm-blackfin/mach-bf533/anomaly.h index f36ff5af1b91..98209d40abba 100644 --- a/include/asm-blackfin/mach-bf533/anomaly.h +++ b/include/asm-blackfin/mach-bf533/anomaly.h @@ -7,9 +7,7 @@ */ /* This file shoule be up to date with: - * - Revision X, March 23, 2007; ADSP-BF533 Blackfin Processor Anomaly List - * - Revision AB, March 23, 2007; ADSP-BF532 Blackfin Processor Anomaly List - * - Revision W, March 23, 2007; ADSP-BF531 Blackfin Processor Anomaly List + * - Revision B, 12/10/2007; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -17,7 +15,7 @@ /* We do not support 0.1 or 0.2 silicon - sorry */ #if __SILICON_REVISION__ < 3 -# error Kernel will not work on BF533 silicon version 0.0, 0.1, or 0.2 +# error will not work on BF533 silicon version 0.0, 0.1, or 0.2 #endif #if defined(__ADSPBF531__) @@ -251,6 +249,12 @@ #define ANOMALY_05000192 (__SILICON_REVISION__ < 3) /* Internal Voltage Regulator may not start up */ #define ANOMALY_05000206 (__SILICON_REVISION__ < 3) +/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ +#define ANOMALY_05000357 (1) +/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ +#define ANOMALY_05000366 (1) +/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ +#define ANOMALY_05000371 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000266 (0) diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h index 2b66ecf489f7..746a794b3119 100644 --- a/include/asm-blackfin/mach-bf537/anomaly.h +++ b/include/asm-blackfin/mach-bf537/anomaly.h @@ -7,9 +7,7 @@ */ /* This file shoule be up to date with: - * - Revision M, March 13, 2007; ADSP-BF537 Blackfin Processor Anomaly List - * - Revision L, March 13, 2007; ADSP-BF536 Blackfin Processor Anomaly List - * - Revision M, March 13, 2007; ADSP-BF534 Blackfin Processor Anomaly List + * - Revision A, 09/04/2007; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -17,7 +15,7 @@ /* We do not support 0.1 silicon - sorry */ #if __SILICON_REVISION__ < 2 -# error Kernel will not work on BF537 silicon version 0.0 or 0.1 +# error will not work on BF537 silicon version 0.0 or 0.1 #endif #if defined(__ADSPBF534__) @@ -44,6 +42,8 @@ #define ANOMALY_05000122 (1) /* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */ #define ANOMALY_05000157 (__SILICON_REVISION__ < 2) +/* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */ +#define ANOMALY_05000167 (1) /* PPI_DELAY not functional in PPI modes with 0 frame syncs */ #define ANOMALY_05000180 (1) /* Instruction Cache Is Not Functional */ @@ -130,6 +130,12 @@ #define ANOMALY_05000321 (__SILICON_REVISION__ < 3) /* EMAC RMII mode at 10-Base-T speed: RX frames not received properly */ #define ANOMALY_05000322 (1) +/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */ +#define ANOMALY_05000341 (__SILICON_REVISION__ >= 3) +/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ +#define ANOMALY_05000357 (1) +/* DMAs that Go Urgent during Tight Core Writes to External Memory Are Blocked */ +#define ANOMALY_05000359 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000125 (0) diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h index c5b63759cdee..850dc12eb7f2 100644 --- a/include/asm-blackfin/mach-bf548/anomaly.h +++ b/include/asm-blackfin/mach-bf548/anomaly.h @@ -7,7 +7,7 @@ */ /* This file shoule be up to date with: - * - Revision C, July 16, 2007; ADSP-BF549 Silicon Anomaly List + * - Revision E, 11/28/2007; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -26,47 +26,59 @@ /* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */ #define ANOMALY_05000272 (1) /* False Hardware Error Exception when ISR context is not restored */ -#define ANOMALY_05000281 (1) +#define ANOMALY_05000281 (__SILICON_REVISION__ < 1) /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */ -#define ANOMALY_05000304 (1) +#define ANOMALY_05000304 (__SILICON_REVISION__ < 1) /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ #define ANOMALY_05000310 (1) /* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ -#define ANOMALY_05000312 (1) +#define ANOMALY_05000312 (__SILICON_REVISION__ < 1) /* TWI Slave Boot Mode Is Not Functional */ -#define ANOMALY_05000324 (1) +#define ANOMALY_05000324 (__SILICON_REVISION__ < 1) /* External FIFO Boot Mode Is Not Functional */ -#define ANOMALY_05000325 (1) +#define ANOMALY_05000325 (__SILICON_REVISION__ < 1) /* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */ -#define ANOMALY_05000327 (1) +#define ANOMALY_05000327 (__SILICON_REVISION__ < 1) /* Incorrect Access of OTP_STATUS During otp_write() Function */ -#define ANOMALY_05000328 (1) +#define ANOMALY_05000328 (__SILICON_REVISION__ < 1) /* Synchronous Burst Flash Boot Mode Is Not Functional */ -#define ANOMALY_05000329 (1) +#define ANOMALY_05000329 (__SILICON_REVISION__ < 1) /* Host DMA Boot Mode Is Not Functional */ -#define ANOMALY_05000330 (1) +#define ANOMALY_05000330 (__SILICON_REVISION__ < 1) /* Inadequate Timing Margins on DDR DQS to DQ and DQM Skew */ -#define ANOMALY_05000334 (1) +#define ANOMALY_05000334 (__SILICON_REVISION__ < 1) /* Inadequate Rotary Debounce Logic Duration */ -#define ANOMALY_05000335 (1) +#define ANOMALY_05000335 (__SILICON_REVISION__ < 1) /* Phantom Interrupt Occurs After First Configuration of Host DMA Port */ -#define ANOMALY_05000336 (1) +#define ANOMALY_05000336 (__SILICON_REVISION__ < 1) /* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */ -#define ANOMALY_05000337 (1) +#define ANOMALY_05000337 (__SILICON_REVISION__ < 1) /* Slave-Mode SPI0 MISO Failure With CPHA = 0 */ -#define ANOMALY_05000338 (1) +#define ANOMALY_05000338 (__SILICON_REVISION__ < 1) /* If Memory Reads Are Enabled on SDH or HOSTDP, Other DMAC1 Peripherals Cannot Read */ -#define ANOMALY_05000340 (1) +#define ANOMALY_05000340 (__SILICON_REVISION__ < 1) /* Boot Host Wait (HWAIT) and Boot Host Wait Alternate (HWAITA) Signals Are Swapped */ -#define ANOMALY_05000344 (1) +#define ANOMALY_05000344 (__SILICON_REVISION__ < 1) /* USB Calibration Value Is Not Intialized */ -#define ANOMALY_05000346 (1) +#define ANOMALY_05000346 (__SILICON_REVISION__ < 1) /* Boot ROM Kernel Incorrectly Alters Reset Value of USB Register */ -#define ANOMALY_05000347 (1) +#define ANOMALY_05000347 (__SILICON_REVISION__ < 1) /* Data Lost when Core Reads SDH Data FIFO */ -#define ANOMALY_05000349 (1) +#define ANOMALY_05000349 (__SILICON_REVISION__ < 1) /* PLL Status Register Is Inaccurate */ -#define ANOMALY_05000351 (1) +#define ANOMALY_05000351 (__SILICON_REVISION__ < 1) +/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ +#define ANOMALY_05000357 (1) +/* External Memory Read Access Hangs Core With PLL Bypass */ +#define ANOMALY_05000360 (1) +/* DMAs that Go Urgent during Tight Core Writes to External Memory Are Blocked */ +#define ANOMALY_05000365 (1) +/* Addressing Conflict between Boot ROM and Asynchronous Memory */ +#define ANOMALY_05000369 (1) +/* Mobile DDR Operation Not Functional */ +#define ANOMALY_05000377 (1) +/* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */ +#define ANOMALY_05000378 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000125 (0) diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/include/asm-blackfin/mach-bf561/anomaly.h index bed956456884..0c1d46193939 100644 --- a/include/asm-blackfin/mach-bf561/anomaly.h +++ b/include/asm-blackfin/mach-bf561/anomaly.h @@ -7,7 +7,7 @@ */ /* This file shoule be up to date with: - * - Revision N, March 28, 2007; ADSP-BF561 Silicon Anomaly List + * - Revision O, 11/15/2007; ADSP-BF561 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -15,7 +15,7 @@ /* We do not support 0.1, 0.2, or 0.4 silicon - sorry */ #if __SILICON_REVISION__ < 3 || __SILICON_REVISION__ == 4 -# error Kernel will not work on BF561 silicon version 0.0, 0.1, 0.2, or 0.4 +# error will not work on BF561 silicon version 0.0, 0.1, 0.2, or 0.4 #endif /* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */ @@ -208,6 +208,8 @@ #define ANOMALY_05000275 (__SILICON_REVISION__ > 2) /* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */ #define ANOMALY_05000276 (__SILICON_REVISION__ < 5) +/* Writes to an I/O data register one SCLK cycle after an edge is detected may clear interrupt */ +#define ANOMALY_05000277 (__SILICON_REVISION__ < 3) /* Disabling Peripherals with DMA Running May Cause DMA System Instability */ #define ANOMALY_05000278 (__SILICON_REVISION__ < 5) /* False Hardware Error Exception When ISR Context Is Not Restored */ @@ -246,6 +248,18 @@ #define ANOMALY_05000332 (__SILICON_REVISION__ < 5) /* Flag Data Register Writes One SCLK Cycle After Edge Is Detected May Clear Interrupt Status */ #define ANOMALY_05000333 (__SILICON_REVISION__ < 5) +/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available on Older Silicon) */ +#define ANOMALY_05000339 (__SILICON_REVISION__ < 5) +/* Memory DMA FIFO Causes Throughput Degradation on Writes to External Memory */ +#define ANOMALY_05000343 (__SILICON_REVISION__ < 5) +/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ +#define ANOMALY_05000357 (1) +/* Conflicting Column Address Widths Causes SDRAM Errors */ +#define ANOMALY_05000362 (1) +/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ +#define ANOMALY_05000366 (1) +/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ +#define ANOMALY_05000371 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000158 (0) -- cgit v1.2.3-59-g8ed1b From a546b0ac5988348446e4fd5987df699b4c9b1f2a Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 24 Dec 2007 20:19:51 +0800 Subject: [Blackfin] arch: Fix BUG - kernel sometimes would stuck with KEYBOARD_GPIO on Make sure the SYSTEM reset completes before we issue the CORE reset Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/kernel/reboot.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/blackfin/kernel/reboot.c b/arch/blackfin/kernel/reboot.c index ae28aac6fec1..06501a594dda 100644 --- a/arch/blackfin/kernel/reboot.c +++ b/arch/blackfin/kernel/reboot.c @@ -34,9 +34,11 @@ void bfin_reset(void) while (1) { /* initiate system soft reset with magic 0x7 */ bfin_write_SWRST(0x7); + bfin_read_SWRST(); asm("ssync;"); /* clear system soft reset */ bfin_write_SWRST(0); + bfin_read_SWRST(); asm("ssync;"); /* issue core reset */ asm("raise 1"); -- cgit v1.2.3-59-g8ed1b From 6b5eace2f15b53d5a6849078d22e78db77625929 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Thu, 10 Jan 2008 17:57:56 +0800 Subject: [Blackfin] arch: Don't oops_in_progress if single step is comming from the kernel Don't oops_in_progress if single step is comming from the kernel, which happens if a single step occurs after a exception cause. This fixes up the remaining issues in the toolchain bug. Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/kernel/traps.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index c90f16825f98..5e840727a258 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -201,9 +201,9 @@ asmlinkage void trap_c(struct pt_regs *fp) /* TODO: check to see if we are in some sort of deferred HWERR * that we should be able to recover from, not kernel panic */ - if ((bfin_read_IPEND() & 0xFFC0) + if ((bfin_read_IPEND() & 0xFFC0) && (trapnr != VEC_STEP) #ifdef CONFIG_KGDB - && trapnr != VEC_EXCPT02 + && (trapnr != VEC_EXCPT02) #endif ){ console_verbose(); -- cgit v1.2.3-59-g8ed1b From e31639540d2b1474766e95c1a7b1b698468ba092 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Thu, 24 Jan 2008 16:19:15 +0800 Subject: [Blackfin] arch: enable generic GPIO based I2C driver in STAMP-BF533, EZKIT-BF533 and EZKIT-BF561 boards Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf533/boards/ezkit.c | 24 ++++++++++++++++++++++++ arch/blackfin/mach-bf533/boards/stamp.c | 24 ++++++++++++++++++++++++ arch/blackfin/mach-bf561/boards/ezkit.c | 24 ++++++++++++++++++++++++ 3 files changed, 72 insertions(+) diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index ead5c12cbe90..c37dd45c8803 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -280,6 +280,26 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#include + +static struct i2c_gpio_platform_data i2c_gpio_data = { + .sda_pin = 1, + .scl_pin = 0, + .sda_is_open_drain = 0, + .scl_is_open_drain = 0, + .udelay = 40, +}; + +static struct platform_device i2c_gpio_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &i2c_gpio_data, + }, +}; +#endif + static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, @@ -308,6 +328,10 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif + +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) + &i2c_gpio_device, +#endif }; static int __init ezkit_init(void) diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 689816937703..cd87df730ef5 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -396,6 +396,26 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#include + +static struct i2c_gpio_platform_data i2c_gpio_data = { + .sda_pin = 2, + .scl_pin = 3, + .sda_is_open_drain = 0, + .scl_is_open_drain = 0, + .udelay = 40, +}; + +static struct platform_device i2c_gpio_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &i2c_gpio_data, + }, +}; +#endif + static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, @@ -433,6 +453,10 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif + +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) + &i2c_gpio_device, +#endif }; static int __init stamp_init(void) diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index edfceb08a7d5..36114dd4ab3a 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -270,6 +270,26 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#include + +static struct i2c_gpio_platform_data i2c_gpio_data = { + .sda_pin = 1, + .scl_pin = 0, + .sda_is_open_drain = 0, + .scl_is_open_drain = 0, + .udelay = 40, +}; + +static struct platform_device i2c_gpio_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &i2c_gpio_data, + }, +}; +#endif + static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) &smc91x_device, @@ -294,6 +314,10 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif + +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) + &i2c_gpio_device, +#endif }; static int __init ezkit_init(void) -- cgit v1.2.3-59-g8ed1b From aee3a29240ad167ad7875d859506d8bb90431c70 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Fri, 11 Jan 2008 16:53:00 +0800 Subject: [Blackfin] arch: print out list of modules if kernel is crashing and tell people if the kernel is tainted Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/kernel/traps.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 5e840727a258..66b5f3e3ae2a 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -497,6 +497,7 @@ asmlinkage void trap_c(struct pt_regs *fp) dump_bfin_trace_buffer(); show_stack(current, &stack); if (oops_in_progress) { + print_modules(); #ifndef CONFIG_ACCESS_CHECK printk(KERN_EMERG "Please turn on " "CONFIG_ACCESS_CHECK\n"); @@ -761,7 +762,7 @@ void show_regs(struct pt_regs *fp) unsigned int i; unsigned long flags; - printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\n"); + printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted()); printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n", (long)fp->seqstat, fp->ipend, fp->syscfg); printk(KERN_NOTICE " HWERRCAUSE: 0x%lx\n", -- cgit v1.2.3-59-g8ed1b From 7a1a6d00618bce53ae88e501ff5d4b82522db926 Mon Sep 17 00:00:00 2001 From: Bernd Schmidt Date: Fri, 11 Jan 2008 16:58:44 +0800 Subject: [Blackfin] arch: move all code related to CPLB handling into a new subdirectory under kernel/ Signed-off-by: Bernd Schmidt Signed-off-by: Bryan Wu --- arch/blackfin/Makefile | 2 + arch/blackfin/kernel/Makefile | 2 +- arch/blackfin/kernel/cacheinit.c | 67 --- arch/blackfin/kernel/cplb-nompu/Makefile | 8 + arch/blackfin/kernel/cplb-nompu/cacheinit.c | 67 +++ arch/blackfin/kernel/cplb-nompu/cplbhdlr.S | 130 ++++++ arch/blackfin/kernel/cplb-nompu/cplbinfo.c | 208 +++++++++ arch/blackfin/kernel/cplb-nompu/cplbinit.c | 437 +++++++++++++++++++ arch/blackfin/kernel/cplb-nompu/cplbmgr.S | 646 ++++++++++++++++++++++++++++ arch/blackfin/kernel/cplbinit.c | 437 ------------------- arch/blackfin/mach-common/Makefile | 3 +- arch/blackfin/mach-common/cplbhdlr.S | 130 ------ arch/blackfin/mach-common/cplbinfo.c | 208 --------- arch/blackfin/mach-common/cplbmgr.S | 646 ---------------------------- 14 files changed, 1500 insertions(+), 1491 deletions(-) delete mode 100644 arch/blackfin/kernel/cacheinit.c create mode 100644 arch/blackfin/kernel/cplb-nompu/Makefile create mode 100644 arch/blackfin/kernel/cplb-nompu/cacheinit.c create mode 100644 arch/blackfin/kernel/cplb-nompu/cplbhdlr.S create mode 100644 arch/blackfin/kernel/cplb-nompu/cplbinfo.c create mode 100644 arch/blackfin/kernel/cplb-nompu/cplbinit.c create mode 100644 arch/blackfin/kernel/cplb-nompu/cplbmgr.S delete mode 100644 arch/blackfin/kernel/cplbinit.c delete mode 100644 arch/blackfin/mach-common/cplbhdlr.S delete mode 100644 arch/blackfin/mach-common/cplbinfo.c delete mode 100644 arch/blackfin/mach-common/cplbmgr.S diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index 0c9680eac8ef..2fc899c5e45f 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -82,6 +82,8 @@ core-y += arch/$(ARCH)/mach-$(MACHINE)/ core-y += arch/$(ARCH)/mach-$(MACHINE)/boards/ endif +core-y += arch/$(ARCH)/kernel/cplb-nompu/ + libs-y += arch/$(ARCH)/lib/ drivers-$(CONFIG_OPROFILE) += arch/$(ARCH)/oprofile/ diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index 8a4cfb293b27..318b9b692a48 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -7,7 +7,7 @@ extra-y := init_task.o vmlinux.lds obj-y := \ entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \ sys_bfin.o time.o traps.o irqchip.o dma-mapping.o flat.o \ - fixed_code.o cplbinit.o cacheinit.o reboot.o bfin_gpio.o + fixed_code.o reboot.o bfin_gpio.o obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o obj-$(CONFIG_MODULES) += module.o diff --git a/arch/blackfin/kernel/cacheinit.c b/arch/blackfin/kernel/cacheinit.c deleted file mode 100644 index 62cbba7364b0..000000000000 --- a/arch/blackfin/kernel/cacheinit.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Copyright 2004-2007 Analog Devices Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include - -#include -#include -#include -#include - -#if defined(CONFIG_BFIN_ICACHE) -void bfin_icache_init(void) -{ - unsigned long *table = icplb_table; - unsigned long ctrl; - int i; - - for (i = 0; i < MAX_CPLBS; i++) { - unsigned long addr = *table++; - unsigned long data = *table++; - if (addr == (unsigned long)-1) - break; - bfin_write32(ICPLB_ADDR0 + i * 4, addr); - bfin_write32(ICPLB_DATA0 + i * 4, data); - } - ctrl = bfin_read_IMEM_CONTROL(); - ctrl |= IMC | ENICPLB; - bfin_write_IMEM_CONTROL(ctrl); -} -#endif - -#if defined(CONFIG_BFIN_DCACHE) -void bfin_dcache_init(void) -{ - unsigned long *table = dcplb_table; - unsigned long ctrl; - int i; - - for (i = 0; i < MAX_CPLBS; i++) { - unsigned long addr = *table++; - unsigned long data = *table++; - if (addr == (unsigned long)-1) - break; - bfin_write32(DCPLB_ADDR0 + i * 4, addr); - bfin_write32(DCPLB_DATA0 + i * 4, data); - } - ctrl = bfin_read_DMEM_CONTROL(); - ctrl |= DMEM_CNTR; - bfin_write_DMEM_CONTROL(ctrl); -} -#endif diff --git a/arch/blackfin/kernel/cplb-nompu/Makefile b/arch/blackfin/kernel/cplb-nompu/Makefile new file mode 100644 index 000000000000..d36ea9b5382e --- /dev/null +++ b/arch/blackfin/kernel/cplb-nompu/Makefile @@ -0,0 +1,8 @@ +# +# arch/blackfin/kernel/cplb-nompu/Makefile +# + +obj-y := cplbinit.o cacheinit.o cplbhdlr.o cplbmgr.o + +obj-$(CONFIG_CPLB_INFO) += cplbinfo.o + diff --git a/arch/blackfin/kernel/cplb-nompu/cacheinit.c b/arch/blackfin/kernel/cplb-nompu/cacheinit.c new file mode 100644 index 000000000000..62cbba7364b0 --- /dev/null +++ b/arch/blackfin/kernel/cplb-nompu/cacheinit.c @@ -0,0 +1,67 @@ +/* + * Copyright 2004-2007 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include + +#include +#include +#include +#include + +#if defined(CONFIG_BFIN_ICACHE) +void bfin_icache_init(void) +{ + unsigned long *table = icplb_table; + unsigned long ctrl; + int i; + + for (i = 0; i < MAX_CPLBS; i++) { + unsigned long addr = *table++; + unsigned long data = *table++; + if (addr == (unsigned long)-1) + break; + bfin_write32(ICPLB_ADDR0 + i * 4, addr); + bfin_write32(ICPLB_DATA0 + i * 4, data); + } + ctrl = bfin_read_IMEM_CONTROL(); + ctrl |= IMC | ENICPLB; + bfin_write_IMEM_CONTROL(ctrl); +} +#endif + +#if defined(CONFIG_BFIN_DCACHE) +void bfin_dcache_init(void) +{ + unsigned long *table = dcplb_table; + unsigned long ctrl; + int i; + + for (i = 0; i < MAX_CPLBS; i++) { + unsigned long addr = *table++; + unsigned long data = *table++; + if (addr == (unsigned long)-1) + break; + bfin_write32(DCPLB_ADDR0 + i * 4, addr); + bfin_write32(DCPLB_DATA0 + i * 4, data); + } + ctrl = bfin_read_DMEM_CONTROL(); + ctrl |= DMEM_CNTR; + bfin_write_DMEM_CONTROL(ctrl); +} +#endif diff --git a/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S b/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S new file mode 100644 index 000000000000..2788532de72b --- /dev/null +++ b/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S @@ -0,0 +1,130 @@ +/* + * File: arch/blackfin/mach-common/cplbhdlr.S + * Based on: + * Author: LG Soft India + * + * Created: ? + * Description: CPLB exception handler + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include + +#ifdef CONFIG_EXCPT_IRQ_SYSC_L1 +.section .l1.text +#else +.text +#endif + +.type _cplb_mgr, STT_FUNC; +.type _panic_cplb_error, STT_FUNC; + +.align 2 + +ENTRY(__cplb_hdr) + R2 = SEQSTAT; + + /* Mask the contents of SEQSTAT and leave only EXCAUSE in R2 */ + R2 <<= 26; + R2 >>= 26; + + R1 = 0x23; /* Data access CPLB protection violation */ + CC = R2 == R1; + IF !CC JUMP .Lnot_data_write; + R0 = 2; /* is a write to data space*/ + JUMP .Lis_icplb_miss; + +.Lnot_data_write: + R1 = 0x2C; /* CPLB miss on an instruction fetch */ + CC = R2 == R1; + R0 = 0; /* is_data_miss == False*/ + IF CC JUMP .Lis_icplb_miss; + + R1 = 0x26; + CC = R2 == R1; + IF !CC JUMP .Lunknown; + + R0 = 1; /* is_data_miss == True*/ + +.Lis_icplb_miss: + +#if defined(CONFIG_BFIN_ICACHE) || defined(CONFIG_BFIN_DCACHE) +# if defined(CONFIG_BFIN_ICACHE) && !defined(CONFIG_BFIN_DCACHE) + R1 = CPLB_ENABLE_ICACHE; +# endif +# if !defined(CONFIG_BFIN_ICACHE) && defined(CONFIG_BFIN_DCACHE) + R1 = CPLB_ENABLE_DCACHE; +# endif +# if defined(CONFIG_BFIN_ICACHE) && defined(CONFIG_BFIN_DCACHE) + R1 = CPLB_ENABLE_DCACHE | CPLB_ENABLE_ICACHE; +# endif +#else + R1 = 0; +#endif + + [--SP] = RETS; + CALL _cplb_mgr; + RETS = [SP++]; + CC = R0 == 0; + IF !CC JUMP .Lnot_replaced; + RTS; + +/* + * Diagnostic exception handlers + */ +.Lunknown: + R0 = CPLB_UNKNOWN_ERR; + JUMP .Lcplb_error; + +.Lnot_replaced: + CC = R0 == CPLB_NO_UNLOCKED; + IF !CC JUMP .Lnext_check; + R0 = CPLB_NO_UNLOCKED; + JUMP .Lcplb_error; + +.Lnext_check: + CC = R0 == CPLB_NO_ADDR_MATCH; + IF !CC JUMP .Lnext_check2; + R0 = CPLB_NO_ADDR_MATCH; + JUMP .Lcplb_error; + +.Lnext_check2: + CC = R0 == CPLB_PROT_VIOL; + IF !CC JUMP .Lstrange_return_from_cplb_mgr; + R0 = CPLB_PROT_VIOL; + JUMP .Lcplb_error; + +.Lstrange_return_from_cplb_mgr: + IDLE; + CSYNC; + JUMP .Lstrange_return_from_cplb_mgr; + +.Lcplb_error: + R1 = sp; + SP += -12; + call _panic_cplb_error; + SP += 12; + JUMP _handle_bad_cplb; + +ENDPROC(__cplb_hdr) diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinfo.c b/arch/blackfin/kernel/cplb-nompu/cplbinfo.c new file mode 100644 index 000000000000..a4f0b428a34d --- /dev/null +++ b/arch/blackfin/kernel/cplb-nompu/cplbinfo.c @@ -0,0 +1,208 @@ +/* + * File: arch/blackfin/mach-common/cplbinfo.c + * Based on: + * Author: Sonic Zhang + * + * Created: Jan. 2005 + * Description: Display CPLB status + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#define CPLB_I 1 +#define CPLB_D 2 + +#define SYNC_SYS SSYNC() +#define SYNC_CORE CSYNC() + +#define CPLB_BIT_PAGESIZE 0x30000 + +static int page_size_table[4] = { + 0x00000400, /* 1K */ + 0x00001000, /* 4K */ + 0x00100000, /* 1M */ + 0x00400000 /* 4M */ +}; + +static char page_size_string_table[][4] = { "1K", "4K", "1M", "4M" }; + +static int cplb_find_entry(unsigned long *cplb_addr, + unsigned long *cplb_data, unsigned long addr, + unsigned long data) +{ + int ii; + + for (ii = 0; ii < 16; ii++) + if (addr >= cplb_addr[ii] && addr < cplb_addr[ii] + + page_size_table[(cplb_data[ii] & CPLB_BIT_PAGESIZE) >> 16] + && (cplb_data[ii] == data)) + return ii; + + return -1; +} + +static char *cplb_print_entry(char *buf, int type) +{ + unsigned long *p_addr = dpdt_table; + unsigned long *p_data = dpdt_table + 1; + unsigned long *p_icount = dpdt_swapcount_table; + unsigned long *p_ocount = dpdt_swapcount_table + 1; + unsigned long *cplb_addr = (unsigned long *)DCPLB_ADDR0; + unsigned long *cplb_data = (unsigned long *)DCPLB_DATA0; + int entry = 0, used_cplb = 0; + + if (type == CPLB_I) { + buf += sprintf(buf, "Instruction CPLB entry:\n"); + p_addr = ipdt_table; + p_data = ipdt_table + 1; + p_icount = ipdt_swapcount_table; + p_ocount = ipdt_swapcount_table + 1; + cplb_addr = (unsigned long *)ICPLB_ADDR0; + cplb_data = (unsigned long *)ICPLB_DATA0; + } else + buf += sprintf(buf, "Data CPLB entry:\n"); + + buf += sprintf(buf, "Address\t\tData\tSize\tValid\tLocked\tSwapin\tiCount\toCount\n"); + + while (*p_addr != 0xffffffff) { + entry = cplb_find_entry(cplb_addr, cplb_data, *p_addr, *p_data); + if (entry >= 0) + used_cplb |= 1 << entry; + + buf += + sprintf(buf, + "0x%08lx\t0x%05lx\t%s\t%c\t%c\t%2d\t%ld\t%ld\n", + *p_addr, *p_data, + page_size_string_table[(*p_data & 0x30000) >> 16], + (*p_data & CPLB_VALID) ? 'Y' : 'N', + (*p_data & CPLB_LOCK) ? 'Y' : 'N', entry, *p_icount, + *p_ocount); + + p_addr += 2; + p_data += 2; + p_icount += 2; + p_ocount += 2; + } + + if (used_cplb != 0xffff) { + buf += sprintf(buf, "Unused/mismatched CPLBs:\n"); + + for (entry = 0; entry < 16; entry++) + if (0 == ((1 << entry) & used_cplb)) { + int flags = cplb_data[entry]; + buf += + sprintf(buf, + "%2d: 0x%08lx\t0x%05x\t%s\t%c\t%c\n", + entry, cplb_addr[entry], flags, + page_size_string_table[(flags & + 0x30000) >> + 16], + (flags & CPLB_VALID) ? 'Y' : 'N', + (flags & CPLB_LOCK) ? 'Y' : 'N'); + } + } + + buf += sprintf(buf, "\n"); + + return buf; +} + +static int cplbinfo_proc_output(char *buf) +{ + char *p; + + p = buf; + + p += sprintf(p, "------------------ CPLB Information ------------------\n\n"); + + if (bfin_read_IMEM_CONTROL() & ENICPLB) + p = cplb_print_entry(p, CPLB_I); + else + p += sprintf(p, "Instruction CPLB is disabled.\n\n"); + + if (bfin_read_DMEM_CONTROL() & ENDCPLB) + p = cplb_print_entry(p, CPLB_D); + else + p += sprintf(p, "Data CPLB is disabled.\n"); + + return p - buf; +} + +static int cplbinfo_read_proc(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + int len; + + len = cplbinfo_proc_output(page); + if (len <= off + count) + *eof = 1; + *start = page + off; + len -= off; + if (len > count) + len = count; + if (len < 0) + len = 0; + return len; +} + +static int cplbinfo_write_proc(struct file *file, const char __user *buffer, + unsigned long count, void *data) +{ + printk(KERN_INFO "Reset the CPLB swap in/out counts.\n"); + memset(ipdt_swapcount_table, 0, MAX_SWITCH_I_CPLBS * sizeof(unsigned long)); + memset(dpdt_swapcount_table, 0, MAX_SWITCH_D_CPLBS * sizeof(unsigned long)); + + return count; +} + +static int __init cplbinfo_init(void) +{ + struct proc_dir_entry *entry; + + entry = create_proc_entry("cplbinfo", 0, NULL); + if (!entry) + return -ENOMEM; + + entry->read_proc = cplbinfo_read_proc; + entry->write_proc = cplbinfo_write_proc; + entry->data = NULL; + + return 0; +} + +static void __exit cplbinfo_exit(void) +{ + remove_proc_entry("cplbinfo", NULL); +} + +module_init(cplbinfo_init); +module_exit(cplbinfo_exit); diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c new file mode 100644 index 000000000000..6320bc45fbba --- /dev/null +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c @@ -0,0 +1,437 @@ +/* + * Blackfin CPLB initialization + * + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include + +#include +#include +#include + +u_long icplb_table[MAX_CPLBS + 1]; +u_long dcplb_table[MAX_CPLBS + 1]; + +#ifdef CONFIG_CPLB_SWITCH_TAB_L1 +# define PDT_ATTR __attribute__((l1_data)) +#else +# define PDT_ATTR +#endif + +u_long ipdt_table[MAX_SWITCH_I_CPLBS + 1] PDT_ATTR; +u_long dpdt_table[MAX_SWITCH_D_CPLBS + 1] PDT_ATTR; + +#ifdef CONFIG_CPLB_INFO +u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS] PDT_ATTR; +u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS] PDT_ATTR; +#endif + +struct s_cplb { + struct cplb_tab init_i; + struct cplb_tab init_d; + struct cplb_tab switch_i; + struct cplb_tab switch_d; +}; + +#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE) +static struct cplb_desc cplb_data[] = { + { + .start = 0, + .end = SIZE_1K, + .psize = SIZE_1K, + .attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB, + .i_conf = SDRAM_OOPS, + .d_conf = SDRAM_OOPS, +#if defined(CONFIG_DEBUG_HUNT_FOR_ZERO) + .valid = 1, +#else + .valid = 0, +#endif + .name = "Zero Pointer Guard Page", + }, + { + .start = L1_CODE_START, + .end = L1_CODE_START + L1_CODE_LENGTH, + .psize = SIZE_4M, + .attr = INITIAL_T | SWITCH_T | I_CPLB, + .i_conf = L1_IMEMORY, + .d_conf = 0, + .valid = 1, + .name = "L1 I-Memory", + }, + { + .start = L1_DATA_A_START, + .end = L1_DATA_B_START + L1_DATA_B_LENGTH, + .psize = SIZE_4M, + .attr = INITIAL_T | SWITCH_T | D_CPLB, + .i_conf = 0, + .d_conf = L1_DMEMORY, +#if ((L1_DATA_A_LENGTH > 0) || (L1_DATA_B_LENGTH > 0)) + .valid = 1, +#else + .valid = 0, +#endif + .name = "L1 D-Memory", + }, + { + .start = 0, + .end = 0, /* dynamic */ + .psize = 0, + .attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB, + .i_conf = SDRAM_IGENERIC, + .d_conf = SDRAM_DGENERIC, + .valid = 1, + .name = "Kernel Memory", + }, + { + .start = 0, /* dynamic */ + .end = 0, /* dynamic */ + .psize = 0, + .attr = INITIAL_T | SWITCH_T | D_CPLB, + .i_conf = SDRAM_IGENERIC, + .d_conf = SDRAM_DNON_CHBL, + .valid = 1, + .name = "uClinux MTD Memory", + }, + { + .start = 0, /* dynamic */ + .end = 0, /* dynamic */ + .psize = SIZE_1M, + .attr = INITIAL_T | SWITCH_T | D_CPLB, + .d_conf = SDRAM_DNON_CHBL, + .valid = 1, + .name = "Uncached DMA Zone", + }, + { + .start = 0, /* dynamic */ + .end = 0, /* dynamic */ + .psize = 0, + .attr = SWITCH_T | D_CPLB, + .i_conf = 0, /* dynamic */ + .d_conf = 0, /* dynamic */ + .valid = 1, + .name = "Reserved Memory", + }, + { + .start = ASYNC_BANK0_BASE, + .end = ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE, + .psize = 0, + .attr = SWITCH_T | D_CPLB, + .d_conf = SDRAM_EBIU, + .valid = 1, + .name = "Asynchronous Memory Banks", + }, + { +#ifdef L2_START + .start = L2_START, + .end = L2_START + L2_LENGTH, + .psize = SIZE_1M, + .attr = SWITCH_T | I_CPLB | D_CPLB, + .i_conf = L2_MEMORY, + .d_conf = L2_MEMORY, + .valid = 1, +#else + .valid = 0, +#endif + .name = "L2 Memory", + }, + { + .start = BOOT_ROM_START, + .end = BOOT_ROM_START + BOOT_ROM_LENGTH, + .psize = SIZE_1M, + .attr = SWITCH_T | I_CPLB | D_CPLB, + .i_conf = SDRAM_IGENERIC, + .d_conf = SDRAM_DGENERIC, + .valid = 1, + .name = "On-Chip BootROM", + }, +}; + +static u16 __init lock_kernel_check(u32 start, u32 end) +{ + if ((end <= (u32) _end && end >= (u32)_stext) || + (start <= (u32) _end && start >= (u32)_stext)) + return IN_KERNEL; + return 0; +} + +static unsigned short __init +fill_cplbtab(struct cplb_tab *table, + unsigned long start, unsigned long end, + unsigned long block_size, unsigned long cplb_data) +{ + int i; + + switch (block_size) { + case SIZE_4M: + i = 3; + break; + case SIZE_1M: + i = 2; + break; + case SIZE_4K: + i = 1; + break; + case SIZE_1K: + default: + i = 0; + break; + } + + cplb_data = (cplb_data & ~(3 << 16)) | (i << 16); + + while ((start < end) && (table->pos < table->size)) { + + table->tab[table->pos++] = start; + + if (lock_kernel_check(start, start + block_size) == IN_KERNEL) + table->tab[table->pos++] = + cplb_data | CPLB_LOCK | CPLB_DIRTY; + else + table->tab[table->pos++] = cplb_data; + + start += block_size; + } + return 0; +} + +static unsigned short __init +close_cplbtab(struct cplb_tab *table) +{ + + while (table->pos < table->size) { + + table->tab[table->pos++] = 0; + table->tab[table->pos++] = 0; /* !CPLB_VALID */ + } + return 0; +} + +/* helper function */ +static void __fill_code_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end) +{ + if (cplb_data[i].psize) { + fill_cplbtab(t, + cplb_data[i].start, + cplb_data[i].end, + cplb_data[i].psize, + cplb_data[i].i_conf); + } else { +#if defined(CONFIG_BFIN_ICACHE) + if (ANOMALY_05000263 && i == SDRAM_KERN) { + fill_cplbtab(t, + cplb_data[i].start, + cplb_data[i].end, + SIZE_4M, + cplb_data[i].i_conf); + } else +#endif + { + fill_cplbtab(t, + cplb_data[i].start, + a_start, + SIZE_1M, + cplb_data[i].i_conf); + fill_cplbtab(t, + a_start, + a_end, + SIZE_4M, + cplb_data[i].i_conf); + fill_cplbtab(t, a_end, + cplb_data[i].end, + SIZE_1M, + cplb_data[i].i_conf); + } + } +} + +static void __fill_data_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end) +{ + if (cplb_data[i].psize) { + fill_cplbtab(t, + cplb_data[i].start, + cplb_data[i].end, + cplb_data[i].psize, + cplb_data[i].d_conf); + } else { + fill_cplbtab(t, + cplb_data[i].start, + a_start, SIZE_1M, + cplb_data[i].d_conf); + fill_cplbtab(t, a_start, + a_end, SIZE_4M, + cplb_data[i].d_conf); + fill_cplbtab(t, a_end, + cplb_data[i].end, + SIZE_1M, + cplb_data[i].d_conf); + } +} + +void __init generate_cpl_tables(void) +{ + + u16 i, j, process; + u32 a_start, a_end, as, ae, as_1m; + + struct cplb_tab *t_i = NULL; + struct cplb_tab *t_d = NULL; + struct s_cplb cplb; + + cplb.init_i.size = MAX_CPLBS; + cplb.init_d.size = MAX_CPLBS; + cplb.switch_i.size = MAX_SWITCH_I_CPLBS; + cplb.switch_d.size = MAX_SWITCH_D_CPLBS; + + cplb.init_i.pos = 0; + cplb.init_d.pos = 0; + cplb.switch_i.pos = 0; + cplb.switch_d.pos = 0; + + cplb.init_i.tab = icplb_table; + cplb.init_d.tab = dcplb_table; + cplb.switch_i.tab = ipdt_table; + cplb.switch_d.tab = dpdt_table; + + cplb_data[SDRAM_KERN].end = memory_end; + +#ifdef CONFIG_MTD_UCLINUX + cplb_data[SDRAM_RAM_MTD].start = memory_mtd_start; + cplb_data[SDRAM_RAM_MTD].end = memory_mtd_start + mtd_size; + cplb_data[SDRAM_RAM_MTD].valid = mtd_size > 0; +# if defined(CONFIG_ROMFS_FS) + cplb_data[SDRAM_RAM_MTD].attr |= I_CPLB; + + /* + * The ROMFS_FS size is often not multiple of 1MB. + * This can cause multiple CPLB sets covering the same memory area. + * This will then cause multiple CPLB hit exceptions. + * Workaround: We ensure a contiguous memory area by extending the kernel + * memory section over the mtd section. + * For ROMFS_FS memory must be covered with ICPLBs anyways. + * So there is no difference between kernel and mtd memory setup. + */ + + cplb_data[SDRAM_KERN].end = memory_mtd_start + mtd_size;; + cplb_data[SDRAM_RAM_MTD].valid = 0; + +# endif +#else + cplb_data[SDRAM_RAM_MTD].valid = 0; +#endif + + cplb_data[SDRAM_DMAZ].start = _ramend - DMA_UNCACHED_REGION; + cplb_data[SDRAM_DMAZ].end = _ramend; + + cplb_data[RES_MEM].start = _ramend; + cplb_data[RES_MEM].end = physical_mem_end; + + if (reserved_mem_dcache_on) + cplb_data[RES_MEM].d_conf = SDRAM_DGENERIC; + else + cplb_data[RES_MEM].d_conf = SDRAM_DNON_CHBL; + + if (reserved_mem_icache_on) + cplb_data[RES_MEM].i_conf = SDRAM_IGENERIC; + else + cplb_data[RES_MEM].i_conf = SDRAM_INON_CHBL; + + for (i = ZERO_P; i < ARRAY_SIZE(cplb_data); ++i) { + if (!cplb_data[i].valid) + continue; + + as_1m = cplb_data[i].start % SIZE_1M; + + /* We need to make sure all sections are properly 1M aligned + * However between Kernel Memory and the Kernel mtd section, depending on the + * rootfs size, there can be overlapping memory areas. + */ + + if (as_1m && i != L1I_MEM && i != L1D_MEM) { +#ifdef CONFIG_MTD_UCLINUX + if (i == SDRAM_RAM_MTD) { + if ((cplb_data[SDRAM_KERN].end + 1) > cplb_data[SDRAM_RAM_MTD].start) + cplb_data[SDRAM_RAM_MTD].start = (cplb_data[i].start & (-2*SIZE_1M)) + SIZE_1M; + else + cplb_data[SDRAM_RAM_MTD].start = (cplb_data[i].start & (-2*SIZE_1M)); + } else +#endif + printk(KERN_WARNING "Unaligned Start of %s at 0x%X\n", + cplb_data[i].name, cplb_data[i].start); + } + + as = cplb_data[i].start % SIZE_4M; + ae = cplb_data[i].end % SIZE_4M; + + if (as) + a_start = cplb_data[i].start + (SIZE_4M - (as)); + else + a_start = cplb_data[i].start; + + a_end = cplb_data[i].end - ae; + + for (j = INITIAL_T; j <= SWITCH_T; j++) { + + switch (j) { + case INITIAL_T: + if (cplb_data[i].attr & INITIAL_T) { + t_i = &cplb.init_i; + t_d = &cplb.init_d; + process = 1; + } else + process = 0; + break; + case SWITCH_T: + if (cplb_data[i].attr & SWITCH_T) { + t_i = &cplb.switch_i; + t_d = &cplb.switch_d; + process = 1; + } else + process = 0; + break; + default: + process = 0; + break; + } + + if (!process) + continue; + if (cplb_data[i].attr & I_CPLB) + __fill_code_cplbtab(t_i, i, a_start, a_end); + + if (cplb_data[i].attr & D_CPLB) + __fill_data_cplbtab(t_d, i, a_start, a_end); + } + } + +/* close tables */ + + close_cplbtab(&cplb.init_i); + close_cplbtab(&cplb.init_d); + + cplb.init_i.tab[cplb.init_i.pos] = -1; + cplb.init_d.tab[cplb.init_d.pos] = -1; + cplb.switch_i.tab[cplb.switch_i.pos] = -1; + cplb.switch_d.tab[cplb.switch_d.pos] = -1; + +} + +#endif + diff --git a/arch/blackfin/kernel/cplb-nompu/cplbmgr.S b/arch/blackfin/kernel/cplb-nompu/cplbmgr.S new file mode 100644 index 000000000000..f5cf3accef37 --- /dev/null +++ b/arch/blackfin/kernel/cplb-nompu/cplbmgr.S @@ -0,0 +1,646 @@ +/* + * File: arch/blackfin/mach-common/cplbmgtr.S + * Based on: + * Author: LG Soft India + * + * Created: ? + * Description: CPLB replacement routine for CPLB mismatch + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Usage: int _cplb_mgr(is_data_miss,int enable_cache) + * is_data_miss==2 => Mark as Dirty, write to the clean data page + * is_data_miss==1 => Replace a data CPLB. + * is_data_miss==0 => Replace an instruction CPLB. + * + * Returns: + * CPLB_RELOADED => Successfully updated CPLB table. + * CPLB_NO_UNLOCKED => All CPLBs are locked, so cannot be evicted. + * This indicates that the CPLBs in the configuration + * tablei are badly configured, as this should never + * occur. + * CPLB_NO_ADDR_MATCH => The address being accessed, that triggered the + * exception, is not covered by any of the CPLBs in + * the configuration table. The application is + * presumably misbehaving. + * CPLB_PROT_VIOL => The address being accessed, that triggered the + * exception, was not a first-write to a clean Write + * Back Data page, and so presumably is a genuine + * violation of the page's protection attributes. + * The application is misbehaving. + */ + +#include +#include +#include + +#ifdef CONFIG_EXCPT_IRQ_SYSC_L1 +.section .l1.text +#else +.text +#endif + +.align 2; +ENTRY(_cplb_mgr) + + [--SP]=( R7:4,P5:3 ); + + CC = R0 == 2; + IF CC JUMP .Ldcplb_write; + + CC = R0 == 0; + IF !CC JUMP .Ldcplb_miss_compare; + + /* ICPLB Miss Exception. We need to choose one of the + * currently-installed CPLBs, and replace it with one + * from the configuration table. + */ + + /* A multi-word instruction can cross a page boundary. This means the + * first part of the instruction can be in a valid page, but the + * second part is not, and hence generates the instruction miss. + * However, the fault address is for the start of the instruction, + * not the part that's in the bad page. Therefore, we have to check + * whether the fault address applies to a page that is already present + * in the table. + */ + + P4.L = LO(ICPLB_FAULT_ADDR); + P4.H = HI(ICPLB_FAULT_ADDR); + + P1 = 16; + P5.L = _page_size_table; + P5.H = _page_size_table; + + P0.L = LO(ICPLB_DATA0); + P0.H = HI(ICPLB_DATA0); + R4 = [P4]; /* Get faulting address*/ + R6 = 64; /* Advance past the fault address, which*/ + R6 = R6 + R4; /* we'll use if we find a match*/ + R3 = ((16 << 8) | 2); /* Extract mask, two bits at posn 16 */ + + R5 = 0; +.Lisearch: + + R1 = [P0-0x100]; /* Address for this CPLB */ + + R0 = [P0++]; /* Info for this CPLB*/ + CC = BITTST(R0,0); /* Is the CPLB valid?*/ + IF !CC JUMP .Lnomatch; /* Skip it, if not.*/ + CC = R4 < R1(IU); /* If fault address less than page start*/ + IF CC JUMP .Lnomatch; /* then skip this one.*/ + R2 = EXTRACT(R0,R3.L) (Z); /* Get page size*/ + P1 = R2; + P1 = P5 + (P1<<2); /* index into page-size table*/ + R2 = [P1]; /* Get the page size*/ + R1 = R1 + R2; /* and add to page start, to get page end*/ + CC = R4 < R1(IU); /* and see whether fault addr is in page.*/ + IF !CC R4 = R6; /* If so, advance the address and finish loop.*/ + IF !CC JUMP .Lisearch_done; +.Lnomatch: + /* Go around again*/ + R5 += 1; + CC = BITTST(R5, 4); /* i.e CC = R5 >= 16*/ + IF !CC JUMP .Lisearch; + +.Lisearch_done: + I0 = R4; /* Fault address we'll search for*/ + + /* set up pointers */ + P0.L = LO(ICPLB_DATA0); + P0.H = HI(ICPLB_DATA0); + + /* The replacement procedure for ICPLBs */ + + P4.L = LO(IMEM_CONTROL); + P4.H = HI(IMEM_CONTROL); + + /* Turn off CPLBs while we work, necessary according to HRM before + * modifying CPLB descriptors + */ + R5 = [P4]; /* Control Register*/ + BITCLR(R5,ENICPLB_P); + CLI R1; + SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ + .align 8; + [P4] = R5; + SSYNC; + STI R1; + + R1 = -1; /* end point comparison */ + R3 = 16; /* counter */ + + /* Search through CPLBs for first non-locked entry */ + /* Overwrite it by moving everyone else up by 1 */ +.Licheck_lock: + R0 = [P0++]; + R3 = R3 + R1; + CC = R3 == R1; + IF CC JUMP .Lall_locked; + CC = BITTST(R0, 0); /* an invalid entry is good */ + IF !CC JUMP .Lifound_victim; + CC = BITTST(R0,1); /* but a locked entry isn't */ + IF CC JUMP .Licheck_lock; + +.Lifound_victim: +#ifdef CONFIG_CPLB_INFO + R7 = [P0 - 0x104]; + P2.L = _ipdt_table; + P2.H = _ipdt_table; + P3.L = _ipdt_swapcount_table; + P3.H = _ipdt_swapcount_table; + P3 += -4; +.Licount: + R2 = [P2]; /* address from config table */ + P2 += 8; + P3 += 8; + CC = R2==-1; + IF CC JUMP .Licount_done; + CC = R7==R2; + IF !CC JUMP .Licount; + R7 = [P3]; + R7 += 1; + [P3] = R7; + CSYNC; +.Licount_done: +#endif + LC0=R3; + LSETUP(.Lis_move,.Lie_move) LC0; +.Lis_move: + R0 = [P0]; + [P0 - 4] = R0; + R0 = [P0 - 0x100]; + [P0-0x104] = R0; +.Lie_move: + P0+=4; + + /* Clear ICPLB_DATA15, in case we don't find a replacement + * otherwise, we would have a duplicate entry, and will crash + */ + R0 = 0; + [P0 - 4] = R0; + + /* We've made space in the ICPLB table, so that ICPLB15 + * is now free to be overwritten. Next, we have to determine + * which CPLB we need to install, from the configuration + * table. This is a matter of getting the start-of-page + * addresses and page-lengths from the config table, and + * determining whether the fault address falls within that + * range. + */ + + P2.L = _ipdt_table; + P2.H = _ipdt_table; +#ifdef CONFIG_CPLB_INFO + P3.L = _ipdt_swapcount_table; + P3.H = _ipdt_swapcount_table; + P3 += -8; +#endif + P0.L = _page_size_table; + P0.H = _page_size_table; + + /* Retrieve our fault address (which may have been advanced + * because the faulting instruction crossed a page boundary). + */ + + R0 = I0; + + /* An extraction pattern, to get the page-size bits from + * the CPLB data entry. Bits 16-17, so two bits at posn 16. + */ + + R1 = ((16<<8)|2); +.Linext: R4 = [P2++]; /* address from config table */ + R2 = [P2++]; /* data from config table */ +#ifdef CONFIG_CPLB_INFO + P3 += 8; +#endif + + CC = R4 == -1; /* End of config table*/ + IF CC JUMP .Lno_page_in_table; + + /* See if failed address > start address */ + CC = R4 <= R0(IU); + IF !CC JUMP .Linext; + + /* extract page size (17:16)*/ + R3 = EXTRACT(R2, R1.L) (Z); + + /* add page size to addr to get range */ + + P5 = R3; + P5 = P0 + (P5 << 2); /* scaled, for int access*/ + R3 = [P5]; + R3 = R3 + R4; + + /* See if failed address < (start address + page size) */ + CC = R0 < R3(IU); + IF !CC JUMP .Linext; + + /* We've found a CPLB in the config table that covers + * the faulting address, so install this CPLB into the + * last entry of the table. + */ + + P1.L = LO(ICPLB_DATA15); /* ICPLB_DATA15 */ + P1.H = HI(ICPLB_DATA15); + [P1] = R2; + [P1-0x100] = R4; +#ifdef CONFIG_CPLB_INFO + R3 = [P3]; + R3 += 1; + [P3] = R3; +#endif + + /* P4 points to IMEM_CONTROL, and R5 contains its old + * value, after we disabled ICPLBS. Re-enable them. + */ + + BITSET(R5,ENICPLB_P); + CLI R2; + SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ + .align 8; + [P4] = R5; + SSYNC; + STI R2; + + ( R7:4,P5:3 ) = [SP++]; + R0 = CPLB_RELOADED; + RTS; + +/* FAILED CASES*/ +.Lno_page_in_table: + R0 = CPLB_NO_ADDR_MATCH; + JUMP .Lfail_ret; + +.Lall_locked: + R0 = CPLB_NO_UNLOCKED; + JUMP .Lfail_ret; + +.Lprot_violation: + R0 = CPLB_PROT_VIOL; + +.Lfail_ret: + /* Make sure we turn protection/cache back on, even in the failing case */ + BITSET(R5,ENICPLB_P); + CLI R2; + SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ + .align 8; + [P4] = R5; + SSYNC; + STI R2; + + ( R7:4,P5:3 ) = [SP++]; + RTS; + +.Ldcplb_write: + + /* if a DCPLB is marked as write-back (CPLB_WT==0), and + * it is clean (CPLB_DIRTY==0), then a write to the + * CPLB's page triggers a protection violation. We have to + * mark the CPLB as dirty, to indicate that there are + * pending writes associated with the CPLB. + */ + + P4.L = LO(DCPLB_STATUS); + P4.H = HI(DCPLB_STATUS); + P3.L = LO(DCPLB_DATA0); + P3.H = HI(DCPLB_DATA0); + R5 = [P4]; + + /* A protection violation can be caused by more than just writes + * to a clean WB page, so we have to ensure that: + * - It's a write + * - to a clean WB page + * - and is allowed in the mode the access occurred. + */ + + CC = BITTST(R5, 16); /* ensure it was a write*/ + IF !CC JUMP .Lprot_violation; + + /* to check the rest, we have to retrieve the DCPLB.*/ + + /* The low half of DCPLB_STATUS is a bit mask*/ + + R2 = R5.L (Z); /* indicating which CPLB triggered the event.*/ + R3 = 30; /* so we can use this to determine the offset*/ + R2.L = SIGNBITS R2; + R2 = R2.L (Z); /* into the DCPLB table.*/ + R3 = R3 - R2; + P4 = R3; + P3 = P3 + (P4<<2); + R3 = [P3]; /* Retrieve the CPLB*/ + + /* Now we can check whether it's a clean WB page*/ + + CC = BITTST(R3, 14); /* 0==WB, 1==WT*/ + IF CC JUMP .Lprot_violation; + CC = BITTST(R3, 7); /* 0 == clean, 1 == dirty*/ + IF CC JUMP .Lprot_violation; + + /* Check whether the write is allowed in the mode that was active.*/ + + R2 = 1<<3; /* checking write in user mode*/ + CC = BITTST(R5, 17); /* 0==was user, 1==was super*/ + R5 = CC; + R2 <<= R5; /* if was super, check write in super mode*/ + R2 = R3 & R2; + CC = R2 == 0; + IF CC JUMP .Lprot_violation; + + /* It's a genuine write-to-clean-page.*/ + + BITSET(R3, 7); /* mark as dirty*/ + [P3] = R3; /* and write back.*/ + NOP; + CSYNC; + ( R7:4,P5:3 ) = [SP++]; + R0 = CPLB_RELOADED; + RTS; + +.Ldcplb_miss_compare: + + /* Data CPLB Miss event. We need to choose a CPLB to + * evict, and then locate a new CPLB to install from the + * config table, that covers the faulting address. + */ + + P1.L = LO(DCPLB_DATA15); + P1.H = HI(DCPLB_DATA15); + + P4.L = LO(DCPLB_FAULT_ADDR); + P4.H = HI(DCPLB_FAULT_ADDR); + R4 = [P4]; + I0 = R4; + + /* The replacement procedure for DCPLBs*/ + + R6 = R1; /* Save for later*/ + + /* Turn off CPLBs while we work.*/ + P4.L = LO(DMEM_CONTROL); + P4.H = HI(DMEM_CONTROL); + R5 = [P4]; + BITCLR(R5,ENDCPLB_P); + CLI R0; + SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ + .align 8; + [P4] = R5; + SSYNC; + STI R0; + + /* Start looking for a CPLB to evict. Our order of preference + * is: invalid CPLBs, clean CPLBs, dirty CPLBs. Locked CPLBs + * are no good. + */ + + I1.L = LO(DCPLB_DATA0); + I1.H = HI(DCPLB_DATA0); + P1 = 2; + P2 = 16; + I2.L = _dcplb_preference; + I2.H = _dcplb_preference; + LSETUP(.Lsdsearch1, .Ledsearch1) LC0 = P1; +.Lsdsearch1: + R0 = [I2++]; /* Get the bits we're interested in*/ + P0 = I1; /* Go back to start of table*/ + LSETUP (.Lsdsearch2, .Ledsearch2) LC1 = P2; +.Lsdsearch2: + R1 = [P0++]; /* Fetch each installed CPLB in turn*/ + R2 = R1 & R0; /* and test for interesting bits.*/ + CC = R2 == 0; /* If none are set, it'll do.*/ + IF !CC JUMP .Lskip_stack_check; + + R2 = [P0 - 0x104]; /* R2 - PageStart */ + P3.L = _page_size_table; /* retrieve end address */ + P3.H = _page_size_table; /* retrieve end address */ + R3 = 0x1002; /* 16th - position, 2 bits -length */ +#if ANOMALY_05000209 + nop; /* Anomaly 05000209 */ +#endif + R7 = EXTRACT(R1,R3.l); + R7 = R7 << 2; /* Page size index offset */ + P5 = R7; + P3 = P3 + P5; + R7 = [P3]; /* page size in bytes */ + + R7 = R2 + R7; /* R7 - PageEnd */ + R4 = SP; /* Test SP is in range */ + + CC = R7 < R4; /* if PageEnd < SP */ + IF CC JUMP .Ldfound_victim; + R3 = 0x284; /* stack length from start of trap till + * the point. + * 20 stack locations for future modifications + */ + R4 = R4 + R3; + CC = R4 < R2; /* if SP + stacklen < PageStart */ + IF CC JUMP .Ldfound_victim; +.Lskip_stack_check: + +.Ledsearch2: NOP; +.Ledsearch1: NOP; + + /* If we got here, we didn't find a DCPLB we considered + * replacable, which means all of them were locked. + */ + + JUMP .Lall_locked; +.Ldfound_victim: + +#ifdef CONFIG_CPLB_INFO + R7 = [P0 - 0x104]; + P2.L = _dpdt_table; + P2.H = _dpdt_table; + P3.L = _dpdt_swapcount_table; + P3.H = _dpdt_swapcount_table; + P3 += -4; +.Ldicount: + R2 = [P2]; + P2 += 8; + P3 += 8; + CC = R2==-1; + IF CC JUMP .Ldicount_done; + CC = R7==R2; + IF !CC JUMP .Ldicount; + R7 = [P3]; + R7 += 1; + [P3] = R7; +.Ldicount_done: +#endif + + /* Clean down the hardware loops*/ + R2 = 0; + LC1 = R2; + LC0 = R2; + + /* There's a suitable victim in [P0-4] (because we've + * advanced already). + */ + +.LDdoverwrite: + + /* [P0-4] is a suitable victim CPLB, so we want to + * overwrite it by moving all the following CPLBs + * one space closer to the start. + */ + + R1.L = LO(DCPLB_DATA16); /* DCPLB_DATA15 + 4 */ + R1.H = HI(DCPLB_DATA16); + R0 = P0; + + /* If the victim happens to be in DCPLB15, + * we don't need to move anything. + */ + + CC = R1 == R0; + IF CC JUMP .Lde_moved; + R1 = R1 - R0; + R1 >>= 2; + P1 = R1; + LSETUP(.Lds_move, .Lde_move) LC0=P1; +.Lds_move: + R0 = [P0++]; /* move data */ + [P0 - 8] = R0; + R0 = [P0-0x104] /* move address */ +.Lde_move: + [P0-0x108] = R0; + +.Lde_moved: + NOP; + + /* Clear DCPLB_DATA15, in case we don't find a replacement + * otherwise, we would have a duplicate entry, and will crash + */ + R0 = 0; + [P0 - 0x4] = R0; + + /* We've now made space in DCPLB15 for the new CPLB to be + * installed. The next stage is to locate a CPLB in the + * config table that covers the faulting address. + */ + + R0 = I0; /* Our faulting address */ + + P2.L = _dpdt_table; + P2.H = _dpdt_table; +#ifdef CONFIG_CPLB_INFO + P3.L = _dpdt_swapcount_table; + P3.H = _dpdt_swapcount_table; + P3 += -8; +#endif + + P1.L = _page_size_table; + P1.H = _page_size_table; + + /* An extraction pattern, to retrieve bits 17:16.*/ + + R1 = (16<<8)|2; +.Ldnext: R4 = [P2++]; /* address */ + R2 = [P2++]; /* data */ +#ifdef CONFIG_CPLB_INFO + P3 += 8; +#endif + + CC = R4 == -1; + IF CC JUMP .Lno_page_in_table; + + /* See if failed address > start address */ + CC = R4 <= R0(IU); + IF !CC JUMP .Ldnext; + + /* extract page size (17:16)*/ + R3 = EXTRACT(R2, R1.L) (Z); + + /* add page size to addr to get range */ + + P5 = R3; + P5 = P1 + (P5 << 2); + R3 = [P5]; + R3 = R3 + R4; + + /* See if failed address < (start address + page size) */ + CC = R0 < R3(IU); + IF !CC JUMP .Ldnext; + + /* We've found the CPLB that should be installed, so + * write it into CPLB15, masking off any caching bits + * if necessary. + */ + + P1.L = LO(DCPLB_DATA15); + P1.H = HI(DCPLB_DATA15); + + /* If the DCPLB has cache bits set, but caching hasn't + * been enabled, then we want to mask off the cache-in-L1 + * bit before installing. Moreover, if caching is off, we + * also want to ensure that the DCPLB has WT mode set, rather + * than WB, since WB pages still trigger first-write exceptions + * even when not caching is off, and the page isn't marked as + * cachable. Finally, we could mark the page as clean, not dirty, + * but we choose to leave that decision to the user; if the user + * chooses to have a CPLB pre-defined as dirty, then they always + * pay the cost of flushing during eviction, but don't pay the + * cost of first-write exceptions to mark the page as dirty. + */ + +#ifdef CONFIG_BFIN_WT + BITSET(R6, 14); /* Set WT*/ +#endif + + [P1] = R2; + [P1-0x100] = R4; +#ifdef CONFIG_CPLB_INFO + R3 = [P3]; + R3 += 1; + [P3] = R3; +#endif + + /* We've installed the CPLB, so re-enable CPLBs. P4 + * points to DMEM_CONTROL, and R5 is the value we + * last wrote to it, when we were disabling CPLBs. + */ + + BITSET(R5,ENDCPLB_P); + CLI R2; + .align 8; + [P4] = R5; + SSYNC; + STI R2; + + ( R7:4,P5:3 ) = [SP++]; + R0 = CPLB_RELOADED; + RTS; +ENDPROC(_cplb_mgr) + +.data +.align 4; +_page_size_table: +.byte4 0x00000400; /* 1K */ +.byte4 0x00001000; /* 4K */ +.byte4 0x00100000; /* 1M */ +.byte4 0x00400000; /* 4M */ + +.align 4; +_dcplb_preference: +.byte4 0x00000001; /* valid bit */ +.byte4 0x00000002; /* lock bit */ diff --git a/arch/blackfin/kernel/cplbinit.c b/arch/blackfin/kernel/cplbinit.c deleted file mode 100644 index 6320bc45fbba..000000000000 --- a/arch/blackfin/kernel/cplbinit.c +++ /dev/null @@ -1,437 +0,0 @@ -/* - * Blackfin CPLB initialization - * - * Copyright 2004-2007 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include - -#include -#include -#include - -u_long icplb_table[MAX_CPLBS + 1]; -u_long dcplb_table[MAX_CPLBS + 1]; - -#ifdef CONFIG_CPLB_SWITCH_TAB_L1 -# define PDT_ATTR __attribute__((l1_data)) -#else -# define PDT_ATTR -#endif - -u_long ipdt_table[MAX_SWITCH_I_CPLBS + 1] PDT_ATTR; -u_long dpdt_table[MAX_SWITCH_D_CPLBS + 1] PDT_ATTR; - -#ifdef CONFIG_CPLB_INFO -u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS] PDT_ATTR; -u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS] PDT_ATTR; -#endif - -struct s_cplb { - struct cplb_tab init_i; - struct cplb_tab init_d; - struct cplb_tab switch_i; - struct cplb_tab switch_d; -}; - -#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE) -static struct cplb_desc cplb_data[] = { - { - .start = 0, - .end = SIZE_1K, - .psize = SIZE_1K, - .attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB, - .i_conf = SDRAM_OOPS, - .d_conf = SDRAM_OOPS, -#if defined(CONFIG_DEBUG_HUNT_FOR_ZERO) - .valid = 1, -#else - .valid = 0, -#endif - .name = "Zero Pointer Guard Page", - }, - { - .start = L1_CODE_START, - .end = L1_CODE_START + L1_CODE_LENGTH, - .psize = SIZE_4M, - .attr = INITIAL_T | SWITCH_T | I_CPLB, - .i_conf = L1_IMEMORY, - .d_conf = 0, - .valid = 1, - .name = "L1 I-Memory", - }, - { - .start = L1_DATA_A_START, - .end = L1_DATA_B_START + L1_DATA_B_LENGTH, - .psize = SIZE_4M, - .attr = INITIAL_T | SWITCH_T | D_CPLB, - .i_conf = 0, - .d_conf = L1_DMEMORY, -#if ((L1_DATA_A_LENGTH > 0) || (L1_DATA_B_LENGTH > 0)) - .valid = 1, -#else - .valid = 0, -#endif - .name = "L1 D-Memory", - }, - { - .start = 0, - .end = 0, /* dynamic */ - .psize = 0, - .attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB, - .i_conf = SDRAM_IGENERIC, - .d_conf = SDRAM_DGENERIC, - .valid = 1, - .name = "Kernel Memory", - }, - { - .start = 0, /* dynamic */ - .end = 0, /* dynamic */ - .psize = 0, - .attr = INITIAL_T | SWITCH_T | D_CPLB, - .i_conf = SDRAM_IGENERIC, - .d_conf = SDRAM_DNON_CHBL, - .valid = 1, - .name = "uClinux MTD Memory", - }, - { - .start = 0, /* dynamic */ - .end = 0, /* dynamic */ - .psize = SIZE_1M, - .attr = INITIAL_T | SWITCH_T | D_CPLB, - .d_conf = SDRAM_DNON_CHBL, - .valid = 1, - .name = "Uncached DMA Zone", - }, - { - .start = 0, /* dynamic */ - .end = 0, /* dynamic */ - .psize = 0, - .attr = SWITCH_T | D_CPLB, - .i_conf = 0, /* dynamic */ - .d_conf = 0, /* dynamic */ - .valid = 1, - .name = "Reserved Memory", - }, - { - .start = ASYNC_BANK0_BASE, - .end = ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE, - .psize = 0, - .attr = SWITCH_T | D_CPLB, - .d_conf = SDRAM_EBIU, - .valid = 1, - .name = "Asynchronous Memory Banks", - }, - { -#ifdef L2_START - .start = L2_START, - .end = L2_START + L2_LENGTH, - .psize = SIZE_1M, - .attr = SWITCH_T | I_CPLB | D_CPLB, - .i_conf = L2_MEMORY, - .d_conf = L2_MEMORY, - .valid = 1, -#else - .valid = 0, -#endif - .name = "L2 Memory", - }, - { - .start = BOOT_ROM_START, - .end = BOOT_ROM_START + BOOT_ROM_LENGTH, - .psize = SIZE_1M, - .attr = SWITCH_T | I_CPLB | D_CPLB, - .i_conf = SDRAM_IGENERIC, - .d_conf = SDRAM_DGENERIC, - .valid = 1, - .name = "On-Chip BootROM", - }, -}; - -static u16 __init lock_kernel_check(u32 start, u32 end) -{ - if ((end <= (u32) _end && end >= (u32)_stext) || - (start <= (u32) _end && start >= (u32)_stext)) - return IN_KERNEL; - return 0; -} - -static unsigned short __init -fill_cplbtab(struct cplb_tab *table, - unsigned long start, unsigned long end, - unsigned long block_size, unsigned long cplb_data) -{ - int i; - - switch (block_size) { - case SIZE_4M: - i = 3; - break; - case SIZE_1M: - i = 2; - break; - case SIZE_4K: - i = 1; - break; - case SIZE_1K: - default: - i = 0; - break; - } - - cplb_data = (cplb_data & ~(3 << 16)) | (i << 16); - - while ((start < end) && (table->pos < table->size)) { - - table->tab[table->pos++] = start; - - if (lock_kernel_check(start, start + block_size) == IN_KERNEL) - table->tab[table->pos++] = - cplb_data | CPLB_LOCK | CPLB_DIRTY; - else - table->tab[table->pos++] = cplb_data; - - start += block_size; - } - return 0; -} - -static unsigned short __init -close_cplbtab(struct cplb_tab *table) -{ - - while (table->pos < table->size) { - - table->tab[table->pos++] = 0; - table->tab[table->pos++] = 0; /* !CPLB_VALID */ - } - return 0; -} - -/* helper function */ -static void __fill_code_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end) -{ - if (cplb_data[i].psize) { - fill_cplbtab(t, - cplb_data[i].start, - cplb_data[i].end, - cplb_data[i].psize, - cplb_data[i].i_conf); - } else { -#if defined(CONFIG_BFIN_ICACHE) - if (ANOMALY_05000263 && i == SDRAM_KERN) { - fill_cplbtab(t, - cplb_data[i].start, - cplb_data[i].end, - SIZE_4M, - cplb_data[i].i_conf); - } else -#endif - { - fill_cplbtab(t, - cplb_data[i].start, - a_start, - SIZE_1M, - cplb_data[i].i_conf); - fill_cplbtab(t, - a_start, - a_end, - SIZE_4M, - cplb_data[i].i_conf); - fill_cplbtab(t, a_end, - cplb_data[i].end, - SIZE_1M, - cplb_data[i].i_conf); - } - } -} - -static void __fill_data_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end) -{ - if (cplb_data[i].psize) { - fill_cplbtab(t, - cplb_data[i].start, - cplb_data[i].end, - cplb_data[i].psize, - cplb_data[i].d_conf); - } else { - fill_cplbtab(t, - cplb_data[i].start, - a_start, SIZE_1M, - cplb_data[i].d_conf); - fill_cplbtab(t, a_start, - a_end, SIZE_4M, - cplb_data[i].d_conf); - fill_cplbtab(t, a_end, - cplb_data[i].end, - SIZE_1M, - cplb_data[i].d_conf); - } -} - -void __init generate_cpl_tables(void) -{ - - u16 i, j, process; - u32 a_start, a_end, as, ae, as_1m; - - struct cplb_tab *t_i = NULL; - struct cplb_tab *t_d = NULL; - struct s_cplb cplb; - - cplb.init_i.size = MAX_CPLBS; - cplb.init_d.size = MAX_CPLBS; - cplb.switch_i.size = MAX_SWITCH_I_CPLBS; - cplb.switch_d.size = MAX_SWITCH_D_CPLBS; - - cplb.init_i.pos = 0; - cplb.init_d.pos = 0; - cplb.switch_i.pos = 0; - cplb.switch_d.pos = 0; - - cplb.init_i.tab = icplb_table; - cplb.init_d.tab = dcplb_table; - cplb.switch_i.tab = ipdt_table; - cplb.switch_d.tab = dpdt_table; - - cplb_data[SDRAM_KERN].end = memory_end; - -#ifdef CONFIG_MTD_UCLINUX - cplb_data[SDRAM_RAM_MTD].start = memory_mtd_start; - cplb_data[SDRAM_RAM_MTD].end = memory_mtd_start + mtd_size; - cplb_data[SDRAM_RAM_MTD].valid = mtd_size > 0; -# if defined(CONFIG_ROMFS_FS) - cplb_data[SDRAM_RAM_MTD].attr |= I_CPLB; - - /* - * The ROMFS_FS size is often not multiple of 1MB. - * This can cause multiple CPLB sets covering the same memory area. - * This will then cause multiple CPLB hit exceptions. - * Workaround: We ensure a contiguous memory area by extending the kernel - * memory section over the mtd section. - * For ROMFS_FS memory must be covered with ICPLBs anyways. - * So there is no difference between kernel and mtd memory setup. - */ - - cplb_data[SDRAM_KERN].end = memory_mtd_start + mtd_size;; - cplb_data[SDRAM_RAM_MTD].valid = 0; - -# endif -#else - cplb_data[SDRAM_RAM_MTD].valid = 0; -#endif - - cplb_data[SDRAM_DMAZ].start = _ramend - DMA_UNCACHED_REGION; - cplb_data[SDRAM_DMAZ].end = _ramend; - - cplb_data[RES_MEM].start = _ramend; - cplb_data[RES_MEM].end = physical_mem_end; - - if (reserved_mem_dcache_on) - cplb_data[RES_MEM].d_conf = SDRAM_DGENERIC; - else - cplb_data[RES_MEM].d_conf = SDRAM_DNON_CHBL; - - if (reserved_mem_icache_on) - cplb_data[RES_MEM].i_conf = SDRAM_IGENERIC; - else - cplb_data[RES_MEM].i_conf = SDRAM_INON_CHBL; - - for (i = ZERO_P; i < ARRAY_SIZE(cplb_data); ++i) { - if (!cplb_data[i].valid) - continue; - - as_1m = cplb_data[i].start % SIZE_1M; - - /* We need to make sure all sections are properly 1M aligned - * However between Kernel Memory and the Kernel mtd section, depending on the - * rootfs size, there can be overlapping memory areas. - */ - - if (as_1m && i != L1I_MEM && i != L1D_MEM) { -#ifdef CONFIG_MTD_UCLINUX - if (i == SDRAM_RAM_MTD) { - if ((cplb_data[SDRAM_KERN].end + 1) > cplb_data[SDRAM_RAM_MTD].start) - cplb_data[SDRAM_RAM_MTD].start = (cplb_data[i].start & (-2*SIZE_1M)) + SIZE_1M; - else - cplb_data[SDRAM_RAM_MTD].start = (cplb_data[i].start & (-2*SIZE_1M)); - } else -#endif - printk(KERN_WARNING "Unaligned Start of %s at 0x%X\n", - cplb_data[i].name, cplb_data[i].start); - } - - as = cplb_data[i].start % SIZE_4M; - ae = cplb_data[i].end % SIZE_4M; - - if (as) - a_start = cplb_data[i].start + (SIZE_4M - (as)); - else - a_start = cplb_data[i].start; - - a_end = cplb_data[i].end - ae; - - for (j = INITIAL_T; j <= SWITCH_T; j++) { - - switch (j) { - case INITIAL_T: - if (cplb_data[i].attr & INITIAL_T) { - t_i = &cplb.init_i; - t_d = &cplb.init_d; - process = 1; - } else - process = 0; - break; - case SWITCH_T: - if (cplb_data[i].attr & SWITCH_T) { - t_i = &cplb.switch_i; - t_d = &cplb.switch_d; - process = 1; - } else - process = 0; - break; - default: - process = 0; - break; - } - - if (!process) - continue; - if (cplb_data[i].attr & I_CPLB) - __fill_code_cplbtab(t_i, i, a_start, a_end); - - if (cplb_data[i].attr & D_CPLB) - __fill_data_cplbtab(t_d, i, a_start, a_end); - } - } - -/* close tables */ - - close_cplbtab(&cplb.init_i); - close_cplbtab(&cplb.init_d); - - cplb.init_i.tab[cplb.init_i.pos] = -1; - cplb.init_d.tab[cplb.init_d.pos] = -1; - cplb.switch_i.tab[cplb.switch_i.pos] = -1; - cplb.switch_d.tab[cplb.switch_d.pos] = -1; - -} - -#endif - diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile index 4d7733dfd5de..8636d4284bdb 100644 --- a/arch/blackfin/mach-common/Makefile +++ b/arch/blackfin/mach-common/Makefile @@ -3,10 +3,9 @@ # obj-y := \ - cache.o cacheinit.o cplbhdlr.o cplbmgr.o entry.o \ + cache.o cacheinit.o entry.o \ interrupt.o lock.o irqpanic.o arch_checks.o -obj-$(CONFIG_CPLB_INFO) += cplbinfo.o obj-$(CONFIG_BFIN_SINGLE_CORE) += ints-priority-sc.o obj-$(CONFIG_BFIN_DUAL_CORE) += ints-priority-dc.o obj-$(CONFIG_PM) += pm.o dpmc.o diff --git a/arch/blackfin/mach-common/cplbhdlr.S b/arch/blackfin/mach-common/cplbhdlr.S deleted file mode 100644 index 2788532de72b..000000000000 --- a/arch/blackfin/mach-common/cplbhdlr.S +++ /dev/null @@ -1,130 +0,0 @@ -/* - * File: arch/blackfin/mach-common/cplbhdlr.S - * Based on: - * Author: LG Soft India - * - * Created: ? - * Description: CPLB exception handler - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include - -#ifdef CONFIG_EXCPT_IRQ_SYSC_L1 -.section .l1.text -#else -.text -#endif - -.type _cplb_mgr, STT_FUNC; -.type _panic_cplb_error, STT_FUNC; - -.align 2 - -ENTRY(__cplb_hdr) - R2 = SEQSTAT; - - /* Mask the contents of SEQSTAT and leave only EXCAUSE in R2 */ - R2 <<= 26; - R2 >>= 26; - - R1 = 0x23; /* Data access CPLB protection violation */ - CC = R2 == R1; - IF !CC JUMP .Lnot_data_write; - R0 = 2; /* is a write to data space*/ - JUMP .Lis_icplb_miss; - -.Lnot_data_write: - R1 = 0x2C; /* CPLB miss on an instruction fetch */ - CC = R2 == R1; - R0 = 0; /* is_data_miss == False*/ - IF CC JUMP .Lis_icplb_miss; - - R1 = 0x26; - CC = R2 == R1; - IF !CC JUMP .Lunknown; - - R0 = 1; /* is_data_miss == True*/ - -.Lis_icplb_miss: - -#if defined(CONFIG_BFIN_ICACHE) || defined(CONFIG_BFIN_DCACHE) -# if defined(CONFIG_BFIN_ICACHE) && !defined(CONFIG_BFIN_DCACHE) - R1 = CPLB_ENABLE_ICACHE; -# endif -# if !defined(CONFIG_BFIN_ICACHE) && defined(CONFIG_BFIN_DCACHE) - R1 = CPLB_ENABLE_DCACHE; -# endif -# if defined(CONFIG_BFIN_ICACHE) && defined(CONFIG_BFIN_DCACHE) - R1 = CPLB_ENABLE_DCACHE | CPLB_ENABLE_ICACHE; -# endif -#else - R1 = 0; -#endif - - [--SP] = RETS; - CALL _cplb_mgr; - RETS = [SP++]; - CC = R0 == 0; - IF !CC JUMP .Lnot_replaced; - RTS; - -/* - * Diagnostic exception handlers - */ -.Lunknown: - R0 = CPLB_UNKNOWN_ERR; - JUMP .Lcplb_error; - -.Lnot_replaced: - CC = R0 == CPLB_NO_UNLOCKED; - IF !CC JUMP .Lnext_check; - R0 = CPLB_NO_UNLOCKED; - JUMP .Lcplb_error; - -.Lnext_check: - CC = R0 == CPLB_NO_ADDR_MATCH; - IF !CC JUMP .Lnext_check2; - R0 = CPLB_NO_ADDR_MATCH; - JUMP .Lcplb_error; - -.Lnext_check2: - CC = R0 == CPLB_PROT_VIOL; - IF !CC JUMP .Lstrange_return_from_cplb_mgr; - R0 = CPLB_PROT_VIOL; - JUMP .Lcplb_error; - -.Lstrange_return_from_cplb_mgr: - IDLE; - CSYNC; - JUMP .Lstrange_return_from_cplb_mgr; - -.Lcplb_error: - R1 = sp; - SP += -12; - call _panic_cplb_error; - SP += 12; - JUMP _handle_bad_cplb; - -ENDPROC(__cplb_hdr) diff --git a/arch/blackfin/mach-common/cplbinfo.c b/arch/blackfin/mach-common/cplbinfo.c deleted file mode 100644 index a4f0b428a34d..000000000000 --- a/arch/blackfin/mach-common/cplbinfo.c +++ /dev/null @@ -1,208 +0,0 @@ -/* - * File: arch/blackfin/mach-common/cplbinfo.c - * Based on: - * Author: Sonic Zhang - * - * Created: Jan. 2005 - * Description: Display CPLB status - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#define CPLB_I 1 -#define CPLB_D 2 - -#define SYNC_SYS SSYNC() -#define SYNC_CORE CSYNC() - -#define CPLB_BIT_PAGESIZE 0x30000 - -static int page_size_table[4] = { - 0x00000400, /* 1K */ - 0x00001000, /* 4K */ - 0x00100000, /* 1M */ - 0x00400000 /* 4M */ -}; - -static char page_size_string_table[][4] = { "1K", "4K", "1M", "4M" }; - -static int cplb_find_entry(unsigned long *cplb_addr, - unsigned long *cplb_data, unsigned long addr, - unsigned long data) -{ - int ii; - - for (ii = 0; ii < 16; ii++) - if (addr >= cplb_addr[ii] && addr < cplb_addr[ii] + - page_size_table[(cplb_data[ii] & CPLB_BIT_PAGESIZE) >> 16] - && (cplb_data[ii] == data)) - return ii; - - return -1; -} - -static char *cplb_print_entry(char *buf, int type) -{ - unsigned long *p_addr = dpdt_table; - unsigned long *p_data = dpdt_table + 1; - unsigned long *p_icount = dpdt_swapcount_table; - unsigned long *p_ocount = dpdt_swapcount_table + 1; - unsigned long *cplb_addr = (unsigned long *)DCPLB_ADDR0; - unsigned long *cplb_data = (unsigned long *)DCPLB_DATA0; - int entry = 0, used_cplb = 0; - - if (type == CPLB_I) { - buf += sprintf(buf, "Instruction CPLB entry:\n"); - p_addr = ipdt_table; - p_data = ipdt_table + 1; - p_icount = ipdt_swapcount_table; - p_ocount = ipdt_swapcount_table + 1; - cplb_addr = (unsigned long *)ICPLB_ADDR0; - cplb_data = (unsigned long *)ICPLB_DATA0; - } else - buf += sprintf(buf, "Data CPLB entry:\n"); - - buf += sprintf(buf, "Address\t\tData\tSize\tValid\tLocked\tSwapin\tiCount\toCount\n"); - - while (*p_addr != 0xffffffff) { - entry = cplb_find_entry(cplb_addr, cplb_data, *p_addr, *p_data); - if (entry >= 0) - used_cplb |= 1 << entry; - - buf += - sprintf(buf, - "0x%08lx\t0x%05lx\t%s\t%c\t%c\t%2d\t%ld\t%ld\n", - *p_addr, *p_data, - page_size_string_table[(*p_data & 0x30000) >> 16], - (*p_data & CPLB_VALID) ? 'Y' : 'N', - (*p_data & CPLB_LOCK) ? 'Y' : 'N', entry, *p_icount, - *p_ocount); - - p_addr += 2; - p_data += 2; - p_icount += 2; - p_ocount += 2; - } - - if (used_cplb != 0xffff) { - buf += sprintf(buf, "Unused/mismatched CPLBs:\n"); - - for (entry = 0; entry < 16; entry++) - if (0 == ((1 << entry) & used_cplb)) { - int flags = cplb_data[entry]; - buf += - sprintf(buf, - "%2d: 0x%08lx\t0x%05x\t%s\t%c\t%c\n", - entry, cplb_addr[entry], flags, - page_size_string_table[(flags & - 0x30000) >> - 16], - (flags & CPLB_VALID) ? 'Y' : 'N', - (flags & CPLB_LOCK) ? 'Y' : 'N'); - } - } - - buf += sprintf(buf, "\n"); - - return buf; -} - -static int cplbinfo_proc_output(char *buf) -{ - char *p; - - p = buf; - - p += sprintf(p, "------------------ CPLB Information ------------------\n\n"); - - if (bfin_read_IMEM_CONTROL() & ENICPLB) - p = cplb_print_entry(p, CPLB_I); - else - p += sprintf(p, "Instruction CPLB is disabled.\n\n"); - - if (bfin_read_DMEM_CONTROL() & ENDCPLB) - p = cplb_print_entry(p, CPLB_D); - else - p += sprintf(p, "Data CPLB is disabled.\n"); - - return p - buf; -} - -static int cplbinfo_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data) -{ - int len; - - len = cplbinfo_proc_output(page); - if (len <= off + count) - *eof = 1; - *start = page + off; - len -= off; - if (len > count) - len = count; - if (len < 0) - len = 0; - return len; -} - -static int cplbinfo_write_proc(struct file *file, const char __user *buffer, - unsigned long count, void *data) -{ - printk(KERN_INFO "Reset the CPLB swap in/out counts.\n"); - memset(ipdt_swapcount_table, 0, MAX_SWITCH_I_CPLBS * sizeof(unsigned long)); - memset(dpdt_swapcount_table, 0, MAX_SWITCH_D_CPLBS * sizeof(unsigned long)); - - return count; -} - -static int __init cplbinfo_init(void) -{ - struct proc_dir_entry *entry; - - entry = create_proc_entry("cplbinfo", 0, NULL); - if (!entry) - return -ENOMEM; - - entry->read_proc = cplbinfo_read_proc; - entry->write_proc = cplbinfo_write_proc; - entry->data = NULL; - - return 0; -} - -static void __exit cplbinfo_exit(void) -{ - remove_proc_entry("cplbinfo", NULL); -} - -module_init(cplbinfo_init); -module_exit(cplbinfo_exit); diff --git a/arch/blackfin/mach-common/cplbmgr.S b/arch/blackfin/mach-common/cplbmgr.S deleted file mode 100644 index f5cf3accef37..000000000000 --- a/arch/blackfin/mach-common/cplbmgr.S +++ /dev/null @@ -1,646 +0,0 @@ -/* - * File: arch/blackfin/mach-common/cplbmgtr.S - * Based on: - * Author: LG Soft India - * - * Created: ? - * Description: CPLB replacement routine for CPLB mismatch - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Usage: int _cplb_mgr(is_data_miss,int enable_cache) - * is_data_miss==2 => Mark as Dirty, write to the clean data page - * is_data_miss==1 => Replace a data CPLB. - * is_data_miss==0 => Replace an instruction CPLB. - * - * Returns: - * CPLB_RELOADED => Successfully updated CPLB table. - * CPLB_NO_UNLOCKED => All CPLBs are locked, so cannot be evicted. - * This indicates that the CPLBs in the configuration - * tablei are badly configured, as this should never - * occur. - * CPLB_NO_ADDR_MATCH => The address being accessed, that triggered the - * exception, is not covered by any of the CPLBs in - * the configuration table. The application is - * presumably misbehaving. - * CPLB_PROT_VIOL => The address being accessed, that triggered the - * exception, was not a first-write to a clean Write - * Back Data page, and so presumably is a genuine - * violation of the page's protection attributes. - * The application is misbehaving. - */ - -#include -#include -#include - -#ifdef CONFIG_EXCPT_IRQ_SYSC_L1 -.section .l1.text -#else -.text -#endif - -.align 2; -ENTRY(_cplb_mgr) - - [--SP]=( R7:4,P5:3 ); - - CC = R0 == 2; - IF CC JUMP .Ldcplb_write; - - CC = R0 == 0; - IF !CC JUMP .Ldcplb_miss_compare; - - /* ICPLB Miss Exception. We need to choose one of the - * currently-installed CPLBs, and replace it with one - * from the configuration table. - */ - - /* A multi-word instruction can cross a page boundary. This means the - * first part of the instruction can be in a valid page, but the - * second part is not, and hence generates the instruction miss. - * However, the fault address is for the start of the instruction, - * not the part that's in the bad page. Therefore, we have to check - * whether the fault address applies to a page that is already present - * in the table. - */ - - P4.L = LO(ICPLB_FAULT_ADDR); - P4.H = HI(ICPLB_FAULT_ADDR); - - P1 = 16; - P5.L = _page_size_table; - P5.H = _page_size_table; - - P0.L = LO(ICPLB_DATA0); - P0.H = HI(ICPLB_DATA0); - R4 = [P4]; /* Get faulting address*/ - R6 = 64; /* Advance past the fault address, which*/ - R6 = R6 + R4; /* we'll use if we find a match*/ - R3 = ((16 << 8) | 2); /* Extract mask, two bits at posn 16 */ - - R5 = 0; -.Lisearch: - - R1 = [P0-0x100]; /* Address for this CPLB */ - - R0 = [P0++]; /* Info for this CPLB*/ - CC = BITTST(R0,0); /* Is the CPLB valid?*/ - IF !CC JUMP .Lnomatch; /* Skip it, if not.*/ - CC = R4 < R1(IU); /* If fault address less than page start*/ - IF CC JUMP .Lnomatch; /* then skip this one.*/ - R2 = EXTRACT(R0,R3.L) (Z); /* Get page size*/ - P1 = R2; - P1 = P5 + (P1<<2); /* index into page-size table*/ - R2 = [P1]; /* Get the page size*/ - R1 = R1 + R2; /* and add to page start, to get page end*/ - CC = R4 < R1(IU); /* and see whether fault addr is in page.*/ - IF !CC R4 = R6; /* If so, advance the address and finish loop.*/ - IF !CC JUMP .Lisearch_done; -.Lnomatch: - /* Go around again*/ - R5 += 1; - CC = BITTST(R5, 4); /* i.e CC = R5 >= 16*/ - IF !CC JUMP .Lisearch; - -.Lisearch_done: - I0 = R4; /* Fault address we'll search for*/ - - /* set up pointers */ - P0.L = LO(ICPLB_DATA0); - P0.H = HI(ICPLB_DATA0); - - /* The replacement procedure for ICPLBs */ - - P4.L = LO(IMEM_CONTROL); - P4.H = HI(IMEM_CONTROL); - - /* Turn off CPLBs while we work, necessary according to HRM before - * modifying CPLB descriptors - */ - R5 = [P4]; /* Control Register*/ - BITCLR(R5,ENICPLB_P); - CLI R1; - SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ - .align 8; - [P4] = R5; - SSYNC; - STI R1; - - R1 = -1; /* end point comparison */ - R3 = 16; /* counter */ - - /* Search through CPLBs for first non-locked entry */ - /* Overwrite it by moving everyone else up by 1 */ -.Licheck_lock: - R0 = [P0++]; - R3 = R3 + R1; - CC = R3 == R1; - IF CC JUMP .Lall_locked; - CC = BITTST(R0, 0); /* an invalid entry is good */ - IF !CC JUMP .Lifound_victim; - CC = BITTST(R0,1); /* but a locked entry isn't */ - IF CC JUMP .Licheck_lock; - -.Lifound_victim: -#ifdef CONFIG_CPLB_INFO - R7 = [P0 - 0x104]; - P2.L = _ipdt_table; - P2.H = _ipdt_table; - P3.L = _ipdt_swapcount_table; - P3.H = _ipdt_swapcount_table; - P3 += -4; -.Licount: - R2 = [P2]; /* address from config table */ - P2 += 8; - P3 += 8; - CC = R2==-1; - IF CC JUMP .Licount_done; - CC = R7==R2; - IF !CC JUMP .Licount; - R7 = [P3]; - R7 += 1; - [P3] = R7; - CSYNC; -.Licount_done: -#endif - LC0=R3; - LSETUP(.Lis_move,.Lie_move) LC0; -.Lis_move: - R0 = [P0]; - [P0 - 4] = R0; - R0 = [P0 - 0x100]; - [P0-0x104] = R0; -.Lie_move: - P0+=4; - - /* Clear ICPLB_DATA15, in case we don't find a replacement - * otherwise, we would have a duplicate entry, and will crash - */ - R0 = 0; - [P0 - 4] = R0; - - /* We've made space in the ICPLB table, so that ICPLB15 - * is now free to be overwritten. Next, we have to determine - * which CPLB we need to install, from the configuration - * table. This is a matter of getting the start-of-page - * addresses and page-lengths from the config table, and - * determining whether the fault address falls within that - * range. - */ - - P2.L = _ipdt_table; - P2.H = _ipdt_table; -#ifdef CONFIG_CPLB_INFO - P3.L = _ipdt_swapcount_table; - P3.H = _ipdt_swapcount_table; - P3 += -8; -#endif - P0.L = _page_size_table; - P0.H = _page_size_table; - - /* Retrieve our fault address (which may have been advanced - * because the faulting instruction crossed a page boundary). - */ - - R0 = I0; - - /* An extraction pattern, to get the page-size bits from - * the CPLB data entry. Bits 16-17, so two bits at posn 16. - */ - - R1 = ((16<<8)|2); -.Linext: R4 = [P2++]; /* address from config table */ - R2 = [P2++]; /* data from config table */ -#ifdef CONFIG_CPLB_INFO - P3 += 8; -#endif - - CC = R4 == -1; /* End of config table*/ - IF CC JUMP .Lno_page_in_table; - - /* See if failed address > start address */ - CC = R4 <= R0(IU); - IF !CC JUMP .Linext; - - /* extract page size (17:16)*/ - R3 = EXTRACT(R2, R1.L) (Z); - - /* add page size to addr to get range */ - - P5 = R3; - P5 = P0 + (P5 << 2); /* scaled, for int access*/ - R3 = [P5]; - R3 = R3 + R4; - - /* See if failed address < (start address + page size) */ - CC = R0 < R3(IU); - IF !CC JUMP .Linext; - - /* We've found a CPLB in the config table that covers - * the faulting address, so install this CPLB into the - * last entry of the table. - */ - - P1.L = LO(ICPLB_DATA15); /* ICPLB_DATA15 */ - P1.H = HI(ICPLB_DATA15); - [P1] = R2; - [P1-0x100] = R4; -#ifdef CONFIG_CPLB_INFO - R3 = [P3]; - R3 += 1; - [P3] = R3; -#endif - - /* P4 points to IMEM_CONTROL, and R5 contains its old - * value, after we disabled ICPLBS. Re-enable them. - */ - - BITSET(R5,ENICPLB_P); - CLI R2; - SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ - .align 8; - [P4] = R5; - SSYNC; - STI R2; - - ( R7:4,P5:3 ) = [SP++]; - R0 = CPLB_RELOADED; - RTS; - -/* FAILED CASES*/ -.Lno_page_in_table: - R0 = CPLB_NO_ADDR_MATCH; - JUMP .Lfail_ret; - -.Lall_locked: - R0 = CPLB_NO_UNLOCKED; - JUMP .Lfail_ret; - -.Lprot_violation: - R0 = CPLB_PROT_VIOL; - -.Lfail_ret: - /* Make sure we turn protection/cache back on, even in the failing case */ - BITSET(R5,ENICPLB_P); - CLI R2; - SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ - .align 8; - [P4] = R5; - SSYNC; - STI R2; - - ( R7:4,P5:3 ) = [SP++]; - RTS; - -.Ldcplb_write: - - /* if a DCPLB is marked as write-back (CPLB_WT==0), and - * it is clean (CPLB_DIRTY==0), then a write to the - * CPLB's page triggers a protection violation. We have to - * mark the CPLB as dirty, to indicate that there are - * pending writes associated with the CPLB. - */ - - P4.L = LO(DCPLB_STATUS); - P4.H = HI(DCPLB_STATUS); - P3.L = LO(DCPLB_DATA0); - P3.H = HI(DCPLB_DATA0); - R5 = [P4]; - - /* A protection violation can be caused by more than just writes - * to a clean WB page, so we have to ensure that: - * - It's a write - * - to a clean WB page - * - and is allowed in the mode the access occurred. - */ - - CC = BITTST(R5, 16); /* ensure it was a write*/ - IF !CC JUMP .Lprot_violation; - - /* to check the rest, we have to retrieve the DCPLB.*/ - - /* The low half of DCPLB_STATUS is a bit mask*/ - - R2 = R5.L (Z); /* indicating which CPLB triggered the event.*/ - R3 = 30; /* so we can use this to determine the offset*/ - R2.L = SIGNBITS R2; - R2 = R2.L (Z); /* into the DCPLB table.*/ - R3 = R3 - R2; - P4 = R3; - P3 = P3 + (P4<<2); - R3 = [P3]; /* Retrieve the CPLB*/ - - /* Now we can check whether it's a clean WB page*/ - - CC = BITTST(R3, 14); /* 0==WB, 1==WT*/ - IF CC JUMP .Lprot_violation; - CC = BITTST(R3, 7); /* 0 == clean, 1 == dirty*/ - IF CC JUMP .Lprot_violation; - - /* Check whether the write is allowed in the mode that was active.*/ - - R2 = 1<<3; /* checking write in user mode*/ - CC = BITTST(R5, 17); /* 0==was user, 1==was super*/ - R5 = CC; - R2 <<= R5; /* if was super, check write in super mode*/ - R2 = R3 & R2; - CC = R2 == 0; - IF CC JUMP .Lprot_violation; - - /* It's a genuine write-to-clean-page.*/ - - BITSET(R3, 7); /* mark as dirty*/ - [P3] = R3; /* and write back.*/ - NOP; - CSYNC; - ( R7:4,P5:3 ) = [SP++]; - R0 = CPLB_RELOADED; - RTS; - -.Ldcplb_miss_compare: - - /* Data CPLB Miss event. We need to choose a CPLB to - * evict, and then locate a new CPLB to install from the - * config table, that covers the faulting address. - */ - - P1.L = LO(DCPLB_DATA15); - P1.H = HI(DCPLB_DATA15); - - P4.L = LO(DCPLB_FAULT_ADDR); - P4.H = HI(DCPLB_FAULT_ADDR); - R4 = [P4]; - I0 = R4; - - /* The replacement procedure for DCPLBs*/ - - R6 = R1; /* Save for later*/ - - /* Turn off CPLBs while we work.*/ - P4.L = LO(DMEM_CONTROL); - P4.H = HI(DMEM_CONTROL); - R5 = [P4]; - BITCLR(R5,ENDCPLB_P); - CLI R0; - SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ - .align 8; - [P4] = R5; - SSYNC; - STI R0; - - /* Start looking for a CPLB to evict. Our order of preference - * is: invalid CPLBs, clean CPLBs, dirty CPLBs. Locked CPLBs - * are no good. - */ - - I1.L = LO(DCPLB_DATA0); - I1.H = HI(DCPLB_DATA0); - P1 = 2; - P2 = 16; - I2.L = _dcplb_preference; - I2.H = _dcplb_preference; - LSETUP(.Lsdsearch1, .Ledsearch1) LC0 = P1; -.Lsdsearch1: - R0 = [I2++]; /* Get the bits we're interested in*/ - P0 = I1; /* Go back to start of table*/ - LSETUP (.Lsdsearch2, .Ledsearch2) LC1 = P2; -.Lsdsearch2: - R1 = [P0++]; /* Fetch each installed CPLB in turn*/ - R2 = R1 & R0; /* and test for interesting bits.*/ - CC = R2 == 0; /* If none are set, it'll do.*/ - IF !CC JUMP .Lskip_stack_check; - - R2 = [P0 - 0x104]; /* R2 - PageStart */ - P3.L = _page_size_table; /* retrieve end address */ - P3.H = _page_size_table; /* retrieve end address */ - R3 = 0x1002; /* 16th - position, 2 bits -length */ -#if ANOMALY_05000209 - nop; /* Anomaly 05000209 */ -#endif - R7 = EXTRACT(R1,R3.l); - R7 = R7 << 2; /* Page size index offset */ - P5 = R7; - P3 = P3 + P5; - R7 = [P3]; /* page size in bytes */ - - R7 = R2 + R7; /* R7 - PageEnd */ - R4 = SP; /* Test SP is in range */ - - CC = R7 < R4; /* if PageEnd < SP */ - IF CC JUMP .Ldfound_victim; - R3 = 0x284; /* stack length from start of trap till - * the point. - * 20 stack locations for future modifications - */ - R4 = R4 + R3; - CC = R4 < R2; /* if SP + stacklen < PageStart */ - IF CC JUMP .Ldfound_victim; -.Lskip_stack_check: - -.Ledsearch2: NOP; -.Ledsearch1: NOP; - - /* If we got here, we didn't find a DCPLB we considered - * replacable, which means all of them were locked. - */ - - JUMP .Lall_locked; -.Ldfound_victim: - -#ifdef CONFIG_CPLB_INFO - R7 = [P0 - 0x104]; - P2.L = _dpdt_table; - P2.H = _dpdt_table; - P3.L = _dpdt_swapcount_table; - P3.H = _dpdt_swapcount_table; - P3 += -4; -.Ldicount: - R2 = [P2]; - P2 += 8; - P3 += 8; - CC = R2==-1; - IF CC JUMP .Ldicount_done; - CC = R7==R2; - IF !CC JUMP .Ldicount; - R7 = [P3]; - R7 += 1; - [P3] = R7; -.Ldicount_done: -#endif - - /* Clean down the hardware loops*/ - R2 = 0; - LC1 = R2; - LC0 = R2; - - /* There's a suitable victim in [P0-4] (because we've - * advanced already). - */ - -.LDdoverwrite: - - /* [P0-4] is a suitable victim CPLB, so we want to - * overwrite it by moving all the following CPLBs - * one space closer to the start. - */ - - R1.L = LO(DCPLB_DATA16); /* DCPLB_DATA15 + 4 */ - R1.H = HI(DCPLB_DATA16); - R0 = P0; - - /* If the victim happens to be in DCPLB15, - * we don't need to move anything. - */ - - CC = R1 == R0; - IF CC JUMP .Lde_moved; - R1 = R1 - R0; - R1 >>= 2; - P1 = R1; - LSETUP(.Lds_move, .Lde_move) LC0=P1; -.Lds_move: - R0 = [P0++]; /* move data */ - [P0 - 8] = R0; - R0 = [P0-0x104] /* move address */ -.Lde_move: - [P0-0x108] = R0; - -.Lde_moved: - NOP; - - /* Clear DCPLB_DATA15, in case we don't find a replacement - * otherwise, we would have a duplicate entry, and will crash - */ - R0 = 0; - [P0 - 0x4] = R0; - - /* We've now made space in DCPLB15 for the new CPLB to be - * installed. The next stage is to locate a CPLB in the - * config table that covers the faulting address. - */ - - R0 = I0; /* Our faulting address */ - - P2.L = _dpdt_table; - P2.H = _dpdt_table; -#ifdef CONFIG_CPLB_INFO - P3.L = _dpdt_swapcount_table; - P3.H = _dpdt_swapcount_table; - P3 += -8; -#endif - - P1.L = _page_size_table; - P1.H = _page_size_table; - - /* An extraction pattern, to retrieve bits 17:16.*/ - - R1 = (16<<8)|2; -.Ldnext: R4 = [P2++]; /* address */ - R2 = [P2++]; /* data */ -#ifdef CONFIG_CPLB_INFO - P3 += 8; -#endif - - CC = R4 == -1; - IF CC JUMP .Lno_page_in_table; - - /* See if failed address > start address */ - CC = R4 <= R0(IU); - IF !CC JUMP .Ldnext; - - /* extract page size (17:16)*/ - R3 = EXTRACT(R2, R1.L) (Z); - - /* add page size to addr to get range */ - - P5 = R3; - P5 = P1 + (P5 << 2); - R3 = [P5]; - R3 = R3 + R4; - - /* See if failed address < (start address + page size) */ - CC = R0 < R3(IU); - IF !CC JUMP .Ldnext; - - /* We've found the CPLB that should be installed, so - * write it into CPLB15, masking off any caching bits - * if necessary. - */ - - P1.L = LO(DCPLB_DATA15); - P1.H = HI(DCPLB_DATA15); - - /* If the DCPLB has cache bits set, but caching hasn't - * been enabled, then we want to mask off the cache-in-L1 - * bit before installing. Moreover, if caching is off, we - * also want to ensure that the DCPLB has WT mode set, rather - * than WB, since WB pages still trigger first-write exceptions - * even when not caching is off, and the page isn't marked as - * cachable. Finally, we could mark the page as clean, not dirty, - * but we choose to leave that decision to the user; if the user - * chooses to have a CPLB pre-defined as dirty, then they always - * pay the cost of flushing during eviction, but don't pay the - * cost of first-write exceptions to mark the page as dirty. - */ - -#ifdef CONFIG_BFIN_WT - BITSET(R6, 14); /* Set WT*/ -#endif - - [P1] = R2; - [P1-0x100] = R4; -#ifdef CONFIG_CPLB_INFO - R3 = [P3]; - R3 += 1; - [P3] = R3; -#endif - - /* We've installed the CPLB, so re-enable CPLBs. P4 - * points to DMEM_CONTROL, and R5 is the value we - * last wrote to it, when we were disabling CPLBs. - */ - - BITSET(R5,ENDCPLB_P); - CLI R2; - .align 8; - [P4] = R5; - SSYNC; - STI R2; - - ( R7:4,P5:3 ) = [SP++]; - R0 = CPLB_RELOADED; - RTS; -ENDPROC(_cplb_mgr) - -.data -.align 4; -_page_size_table: -.byte4 0x00000400; /* 1K */ -.byte4 0x00001000; /* 4K */ -.byte4 0x00100000; /* 1M */ -.byte4 0x00400000; /* 4M */ - -.align 4; -_dcplb_preference: -.byte4 0x00000001; /* valid bit */ -.byte4 0x00000002; /* lock bit */ -- cgit v1.2.3-59-g8ed1b From 4521ef42de8dbaa9bce3f60bbb5868564f752e98 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Fri, 11 Jan 2008 17:21:41 +0800 Subject: [Blackfin] arch: Add some comments - fix semicolons Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/dpmc.S | 32 +++++++++++++++----------------- 1 file changed, 15 insertions(+), 17 deletions(-) diff --git a/arch/blackfin/mach-common/dpmc.S b/arch/blackfin/mach-common/dpmc.S index 301ac1b6681f..b82c096e1980 100644 --- a/arch/blackfin/mach-common/dpmc.S +++ b/arch/blackfin/mach-common/dpmc.S @@ -175,7 +175,7 @@ ENTRY(_sleep_mode) call _set_sic_iwr; R0 = 0xFFFF (Z); - call _set_rtc_istat + call _set_rtc_istat; P0.H = hi(PLL_CTL); P0.L = lo(PLL_CTL); @@ -213,7 +213,7 @@ ENTRY(_hibernate_mode) call _set_sic_iwr; R0 = 0xFFFF (Z); - call _set_rtc_istat + call _set_rtc_istat; P0.H = hi(VR_CTL); P0.L = lo(VR_CTL); @@ -288,23 +288,22 @@ ENTRY(_sleep_deeper) P3 = R0; R0 = IWR_ENABLE(0); call _set_sic_iwr; - call _set_dram_srfs; + call _set_dram_srfs; /* Set SDRAM Self Refresh */ /* Clear all the interrupts,bits sticky */ R0 = 0xFFFF (Z); - call _set_rtc_istat - + call _set_rtc_istat; P0.H = hi(PLL_DIV); P0.L = lo(PLL_DIV); R6 = W[P0](z); R0.L = 0xF; - W[P0] = R0.l; + W[P0] = R0.l; /* Set Max VCO to SCLK divider */ P0.H = hi(PLL_CTL); P0.L = lo(PLL_CTL); R5 = W[P0](z); R0.L = (CONFIG_MIN_VCO_HZ/CONFIG_CLKIN_HZ) << 9; - W[P0] = R0.l; + W[P0] = R0.l; /* Set Min CLKIN to VCO multiplier */ SSYNC; IDLE; @@ -320,29 +319,28 @@ ENTRY(_sleep_deeper) R1 = R1|R2; R2 = DEPOSIT(R7, R1); - W[P0] = R2; + W[P0] = R2; /* Set Min Core Voltage */ SSYNC; IDLE; call _test_pll_locked; + R0 = P3; + call _set_sic_iwr; /* Set Awake from IDLE */ + P0.H = hi(PLL_CTL); P0.L = lo(PLL_CTL); R0 = W[P0](z); BITSET (R0, 3); - W[P0] = R0.L; - - R0 = P3; - call _set_sic_iwr; - + W[P0] = R0.L; /* Turn CCLK OFF */ SSYNC; IDLE; call _test_pll_locked; R0 = IWR_ENABLE(0); - call _set_sic_iwr; + call _set_sic_iwr; /* Set Awake from IDLE PLL */ P0.H = hi(VR_CTL); P0.L = lo(VR_CTL); @@ -355,15 +353,15 @@ ENTRY(_sleep_deeper) P0.H = hi(PLL_DIV); P0.L = lo(PLL_DIV); - W[P0]= R6; + W[P0]= R6; /* Restore CCLK and SCLK divider */ P0.H = hi(PLL_CTL); P0.L = lo(PLL_CTL); - w[p0] = R5; + w[p0] = R5; /* Restore VCO multiplier */ IDLE; call _test_pll_locked; - call _unset_dram_srfs; + call _unset_dram_srfs; /* SDRAM Self Refresh Off */ STI R4; -- cgit v1.2.3-59-g8ed1b From 2047e40d724d42928c0b5994a1568c1b738efdb7 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 22 Jan 2008 15:29:18 +0800 Subject: [Blackfin] arch: set_bfin_dma_config shouldnt set SYNC or RESTART by default - add argument or option Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/kernel/bfin_dma_5xx.c | 4 ++-- drivers/serial/bfin_5xx.c | 6 ++++-- drivers/video/bf54x-lq043fb.c | 3 ++- include/asm-blackfin/dma.h | 6 +++++- 4 files changed, 13 insertions(+), 6 deletions(-) diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index b54446055a43..fa9debe8d5f4 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -339,13 +339,13 @@ EXPORT_SYMBOL(set_dma_config); unsigned short set_bfin_dma_config(char direction, char flow_mode, - char intr_mode, char dma_mode, char width) + char intr_mode, char dma_mode, char width, char syncmode) { unsigned short config; config = ((direction << 1) | (width << 2) | (dma_mode << 4) | - (intr_mode << 6) | (flow_mode << 12) | RESTART); + (intr_mode << 6) | (flow_mode << 12) | (syncmode << 5)); return config; } EXPORT_SYMBOL(set_bfin_dma_config); diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 6f475b609864..ac2a3ef28d55 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -442,7 +442,8 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) set_bfin_dma_config(DIR_READ, DMA_FLOW_STOP, INTR_ON_BUF, DIMENSION_LINEAR, - DATA_SIZE_8)); + DATA_SIZE_8, + DMA_SYNC_RESTART)); set_dma_start_addr(uart->tx_dma_channel, (unsigned long)(xmit->buf+xmit->tail)); set_dma_x_count(uart->tx_dma_channel, uart->tx_count); set_dma_x_modify(uart->tx_dma_channel, 1); @@ -689,7 +690,8 @@ static int bfin_serial_startup(struct uart_port *port) set_dma_config(uart->rx_dma_channel, set_bfin_dma_config(DIR_WRITE, DMA_FLOW_AUTO, INTR_ON_ROW, DIMENSION_2D, - DATA_SIZE_8)); + DATA_SIZE_8, + DMA_SYNC_RESTART)); set_dma_x_count(uart->rx_dma_channel, DMA_RX_XCOUNT); set_dma_x_modify(uart->rx_dma_channel, 1); set_dma_y_count(uart->rx_dma_channel, DMA_RX_YCOUNT); diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c index 74d11c318987..1b7e54de0d76 100644 --- a/drivers/video/bf54x-lq043fb.c +++ b/drivers/video/bf54x-lq043fb.c @@ -224,7 +224,8 @@ static int config_dma(struct bfin_bf54xfb_info *fbi) set_dma_config(CH_EPPI0, set_bfin_dma_config(DIR_READ, DMA_FLOW_AUTO, INTR_DISABLE, DIMENSION_2D, - DATA_SIZE_32)); + DATA_SIZE_32, + DMA_NOSYNC_KEEP_DMA_BUF)); set_dma_x_count(CH_EPPI0, (LCD_X_RES * LCD_BPP) / DMA_BUS_SIZE); set_dma_x_modify(CH_EPPI0, DMA_BUS_SIZE / 8); set_dma_y_count(CH_EPPI0, LCD_Y_RES); diff --git a/include/asm-blackfin/dma.h b/include/asm-blackfin/dma.h index b469505af364..5abaa2cee8db 100644 --- a/include/asm-blackfin/dma.h +++ b/include/asm-blackfin/dma.h @@ -76,6 +76,9 @@ enum dma_chan_status { #define INTR_ON_BUF 2 #define INTR_ON_ROW 3 +#define DMA_NOSYNC_KEEP_DMA_BUF 0 +#define DMA_SYNC_RESTART 1 + struct dmasg { unsigned long next_desc_addr; unsigned long start_addr; @@ -157,7 +160,8 @@ void set_dma_y_count(unsigned int channel, unsigned short y_count); void set_dma_y_modify(unsigned int channel, short y_modify); void set_dma_config(unsigned int channel, unsigned short config); unsigned short set_bfin_dma_config(char direction, char flow_mode, - char intr_mode, char dma_mode, char width); + char intr_mode, char dma_mode, char width, + char syncmode); void set_dma_curr_addr(unsigned int channel, unsigned long addr); /* get curr status for polling */ -- cgit v1.2.3-59-g8ed1b From b97b8a998397e8c64699559099fa9febffae2b4d Mon Sep 17 00:00:00 2001 From: Bernd Schmidt Date: Sun, 27 Jan 2008 18:39:16 +0800 Subject: [Blackfin] arch: Initial checkin of the memory protection support. Enable it with CONFIG_MPU. Signed-off-by: Bernd Schmidt Signed-off-by: Bryan Wu --- arch/blackfin/Kconfig | 9 + arch/blackfin/Makefile | 6 +- arch/blackfin/kernel/cplb-mpu/Makefile | 8 + arch/blackfin/kernel/cplb-mpu/cacheinit.c | 62 ++++++ arch/blackfin/kernel/cplb-mpu/cplbinfo.c | 144 +++++++++++++ arch/blackfin/kernel/cplb-mpu/cplbinit.c | 91 ++++++++ arch/blackfin/kernel/cplb-mpu/cplbmgr.c | 338 ++++++++++++++++++++++++++++++ arch/blackfin/kernel/setup.c | 10 + arch/blackfin/mach-common/entry.S | 19 ++ arch/blackfin/mm/init.c | 4 +- include/asm-blackfin/cplb-mpu.h | 61 ++++++ include/asm-blackfin/cplb.h | 4 + include/asm-blackfin/cplbinit.h | 8 + include/asm-blackfin/mmu.h | 4 +- include/asm-blackfin/mmu_context.h | 62 +++++- 15 files changed, 822 insertions(+), 8 deletions(-) create mode 100644 arch/blackfin/kernel/cplb-mpu/Makefile create mode 100644 arch/blackfin/kernel/cplb-mpu/cacheinit.c create mode 100644 arch/blackfin/kernel/cplb-mpu/cplbinfo.c create mode 100644 arch/blackfin/kernel/cplb-mpu/cplbinit.c create mode 100644 arch/blackfin/kernel/cplb-mpu/cplbmgr.c create mode 100644 include/asm-blackfin/cplb-mpu.h diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index ce521a921bee..6b96d7d21aea 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -765,6 +765,15 @@ config L1_MAX_PIECE Set the max memory pieces for the L1 SRAM allocation algorithm. Min value is 16. Max value is 1024. + +config MPU + bool "Enable the memory protection unit (EXPERIMENTAL)" + default n + help + Use the processor's MPU to protect applications from accessing + memory they do not own. This comes at a performance penalty + and is recommended only for debugging. + comment "Asynchonous Memory Configuration" menu "EBIU_AMGCTL Global Control" diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index 2fc899c5e45f..0edc402fef54 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -82,7 +82,11 @@ core-y += arch/$(ARCH)/mach-$(MACHINE)/ core-y += arch/$(ARCH)/mach-$(MACHINE)/boards/ endif -core-y += arch/$(ARCH)/kernel/cplb-nompu/ +ifeq ($(CONFIG_MPU),y) +core-y += arch/$(ARCH)/kernel/cplb-mpu/ +else +core-y += arch/$(ARCH)/kernel/cplb-nompu/ +endif libs-y += arch/$(ARCH)/lib/ diff --git a/arch/blackfin/kernel/cplb-mpu/Makefile b/arch/blackfin/kernel/cplb-mpu/Makefile new file mode 100644 index 000000000000..286b69357f97 --- /dev/null +++ b/arch/blackfin/kernel/cplb-mpu/Makefile @@ -0,0 +1,8 @@ +# +# arch/blackfin/kernel/cplb-nompu/Makefile +# + +obj-y := cplbinit.o cacheinit.o cplbmgr.o + +obj-$(CONFIG_CPLB_INFO) += cplbinfo.o + diff --git a/arch/blackfin/kernel/cplb-mpu/cacheinit.c b/arch/blackfin/kernel/cplb-mpu/cacheinit.c new file mode 100644 index 000000000000..9eecfa403187 --- /dev/null +++ b/arch/blackfin/kernel/cplb-mpu/cacheinit.c @@ -0,0 +1,62 @@ +/* + * Copyright 2004-2007 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include + +#include +#include +#include +#include + +#if defined(CONFIG_BFIN_ICACHE) +void bfin_icache_init(void) +{ + unsigned long ctrl; + int i; + + SSYNC(); + for (i = 0; i < MAX_CPLBS; i++) { + bfin_write32(ICPLB_ADDR0 + i * 4, icplb_tbl[i].addr); + bfin_write32(ICPLB_DATA0 + i * 4, icplb_tbl[i].data); + } + ctrl = bfin_read_IMEM_CONTROL(); + ctrl |= IMC | ENICPLB; + bfin_write_IMEM_CONTROL(ctrl); + SSYNC(); +} +#endif + +#if defined(CONFIG_BFIN_DCACHE) +void bfin_dcache_init(void) +{ + unsigned long ctrl; + int i; + + SSYNC(); + for (i = 0; i < MAX_CPLBS; i++) { + bfin_write32(DCPLB_ADDR0 + i * 4, dcplb_tbl[i].addr); + bfin_write32(DCPLB_DATA0 + i * 4, dcplb_tbl[i].data); + } + + ctrl = bfin_read_DMEM_CONTROL(); + ctrl |= DMEM_CNTR; + bfin_write_DMEM_CONTROL(ctrl); + SSYNC(); +} +#endif diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinfo.c b/arch/blackfin/kernel/cplb-mpu/cplbinfo.c new file mode 100644 index 000000000000..bd072299f7f2 --- /dev/null +++ b/arch/blackfin/kernel/cplb-mpu/cplbinfo.c @@ -0,0 +1,144 @@ +/* + * File: arch/blackfin/mach-common/cplbinfo.c + * Based on: + * Author: Sonic Zhang + * + * Created: Jan. 2005 + * Description: Display CPLB status + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#define CPLB_I 1 +#define CPLB_D 2 + +#define SYNC_SYS SSYNC() +#define SYNC_CORE CSYNC() + +#define CPLB_BIT_PAGESIZE 0x30000 + +static char page_size_string_table[][4] = { "1K", "4K", "1M", "4M" }; + +static char *cplb_print_entry(char *buf, struct cplb_entry *tbl, int switched) +{ + int i; + buf += sprintf(buf, "Index\tAddress\t\tData\tSize\tU/RD\tU/WR\tS/WR\tSwitch\n"); + for (i = 0; i < MAX_CPLBS; i++) { + unsigned long data = tbl[i].data; + unsigned long addr = tbl[i].addr; + if (!(data & CPLB_VALID)) + continue; + + buf += + sprintf(buf, + "%d\t0x%08lx\t%06lx\t%s\t%c\t%c\t%c\t%c\n", + i, addr, data, + page_size_string_table[(data & 0x30000) >> 16], + (data & CPLB_USER_RD) ? 'Y' : 'N', + (data & CPLB_USER_WR) ? 'Y' : 'N', + (data & CPLB_SUPV_WR) ? 'Y' : 'N', + i < switched ? 'N' : 'Y'); + } + buf += sprintf(buf, "\n"); + + return buf; +} + +int cplbinfo_proc_output(char *buf) +{ + char *p; + + p = buf; + + p += sprintf(p, "------------------ CPLB Information ------------------\n\n"); + + if (bfin_read_IMEM_CONTROL() & ENICPLB) { + p += sprintf(p, "Instruction CPLB entry:\n"); + p = cplb_print_entry(p, icplb_tbl, first_switched_icplb); + } else + p += sprintf(p, "Instruction CPLB is disabled.\n\n"); + + if (1 || bfin_read_DMEM_CONTROL() & ENDCPLB) { + p += sprintf(p, "Data CPLB entry:\n"); + p = cplb_print_entry(p, dcplb_tbl, first_switched_dcplb); + } else + p += sprintf(p, "Data CPLB is disabled.\n"); + + p += sprintf(p, "ICPLB miss: %d\nICPLB supervisor miss: %d\n", + nr_icplb_miss, nr_icplb_supv_miss); + p += sprintf(p, "DCPLB miss: %d\nDCPLB protection fault:%d\n", + nr_dcplb_miss, nr_dcplb_prot); + p += sprintf(p, "CPLB flushes: %d\n", + nr_cplb_flush); + + return p - buf; +} + +static int cplbinfo_read_proc(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + int len; + + len = cplbinfo_proc_output(page); + if (len <= off + count) + *eof = 1; + *start = page + off; + len -= off; + if (len > count) + len = count; + if (len < 0) + len = 0; + return len; +} + +static int __init cplbinfo_init(void) +{ + struct proc_dir_entry *entry; + + entry = create_proc_entry("cplbinfo", 0, NULL); + if (!entry) + return -ENOMEM; + + entry->read_proc = cplbinfo_read_proc; + entry->data = NULL; + + return 0; +} + +static void __exit cplbinfo_exit(void) +{ + remove_proc_entry("cplbinfo", NULL); +} + +module_init(cplbinfo_init); +module_exit(cplbinfo_exit); diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c new file mode 100644 index 000000000000..e2e2b5079f5b --- /dev/null +++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c @@ -0,0 +1,91 @@ +/* + * Blackfin CPLB initialization + * + * Copyright 2004-2007 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include + +#include +#include +#include + +struct cplb_entry icplb_tbl[MAX_CPLBS]; +struct cplb_entry dcplb_tbl[MAX_CPLBS]; + +int first_switched_icplb, first_switched_dcplb; +int first_mask_dcplb; + +void __init generate_cpl_tables(void) +{ + int i_d, i_i; + unsigned long addr; + unsigned long d_data, i_data; + unsigned long d_cache = 0, i_cache = 0; + +#ifdef CONFIG_BFIN_ICACHE + i_cache = CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND; +#endif + +#ifdef CONFIG_BFIN_DCACHE + d_cache = CPLB_L1_CHBL; +#ifdef CONFIG_BLKFIN_WT + d_cache |= CPLB_L1_AOW | CPLB_WT; +#endif +#endif + i_d = i_i = 0; + + /* Set up the zero page. */ + dcplb_tbl[i_d].addr = 0; + dcplb_tbl[i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB; + +#if 0 + icplb_tbl[i_i].addr = 0; + icplb_tbl[i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_4KB; +#endif + + /* Cover kernel memory with 4M pages. */ + addr = 0; + d_data = d_cache | CPLB_SUPV_WR | CPLB_VALID | PAGE_SIZE_4MB | CPLB_DIRTY; + i_data = i_cache | CPLB_VALID | CPLB_PORTPRIO | PAGE_SIZE_4MB; + + for (; addr < memory_start; addr += 4 * 1024 * 1024) { + dcplb_tbl[i_d].addr = addr; + dcplb_tbl[i_d++].data = d_data; + icplb_tbl[i_i].addr = addr; + icplb_tbl[i_i++].data = i_data | (addr == 0 ? CPLB_USER_RD : 0); + } + + /* Cover L1 memory. One 4M area for code and data each is enough. */ +#if L1_DATA_A_LENGTH > 0 || L1_DATA_B_LENGTH > 0 + dcplb_tbl[i_d].addr = L1_DATA_A_START; + dcplb_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB; +#endif + icplb_tbl[i_i].addr = L1_CODE_START; + icplb_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB; + + first_mask_dcplb = i_d; + first_switched_dcplb = i_d + (1 << page_mask_order); + first_switched_icplb = i_i; + + while (i_d < MAX_CPLBS) + dcplb_tbl[i_d++].data = 0; + while (i_i < MAX_CPLBS) + icplb_tbl[i_i++].data = 0; +} diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c new file mode 100644 index 000000000000..c426a22f9907 --- /dev/null +++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c @@ -0,0 +1,338 @@ +/* + * Blackfin CPLB exception handling. + * Copyright 2004-2007 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include +#include + +#include +#include +#include + +#ifdef CONFIG_BFIN_ICACHE + +#define FAULT_RW (1 << 16) +#define FAULT_USERSUPV (1 << 17) + +int page_mask_nelts; +int page_mask_order; +unsigned long *current_rwx_mask; + +int nr_dcplb_miss, nr_icplb_miss, nr_icplb_supv_miss, nr_dcplb_prot; +int nr_cplb_flush; + +static inline void disable_dcplb(void) +{ + unsigned long ctrl; + SSYNC(); + ctrl = bfin_read_DMEM_CONTROL(); + ctrl &= ~ENDCPLB; + bfin_write_DMEM_CONTROL(ctrl); + SSYNC(); +} + +static inline void enable_dcplb(void) +{ + unsigned long ctrl; + SSYNC(); + ctrl = bfin_read_DMEM_CONTROL(); + ctrl |= ENDCPLB; + bfin_write_DMEM_CONTROL(ctrl); + SSYNC(); +} + +static inline void disable_icplb(void) +{ + unsigned long ctrl; + SSYNC(); + ctrl = bfin_read_IMEM_CONTROL(); + ctrl &= ~ENICPLB; + bfin_write_IMEM_CONTROL(ctrl); + SSYNC(); +} + +static inline void enable_icplb(void) +{ + unsigned long ctrl; + SSYNC(); + ctrl = bfin_read_IMEM_CONTROL(); + ctrl |= ENICPLB; + bfin_write_IMEM_CONTROL(ctrl); + SSYNC(); +} + +/* + * Given the contents of the status register, return the index of the + * CPLB that caused the fault. + */ +static inline int faulting_cplb_index(int status) +{ + int signbits = __builtin_bfin_norm_fr1x32(status & 0xFFFF); + return 30 - signbits; +} + +/* + * Given the contents of the status register and the DCPLB_DATA contents, + * return true if a write access should be permitted. + */ +static inline int write_permitted(int status, unsigned long data) +{ + if (status & FAULT_USERSUPV) + return !!(data & CPLB_SUPV_WR); + else + return !!(data & CPLB_USER_WR); +} + +/* Counters to implement round-robin replacement. */ +static int icplb_rr_index, dcplb_rr_index; + +/* + * Find an ICPLB entry to be evicted and return its index. + */ +static int evict_one_icplb(void) +{ + int i; + for (i = first_switched_icplb; i < MAX_CPLBS; i++) + if ((icplb_tbl[i].data & CPLB_VALID) == 0) + return i; + i = first_switched_icplb + icplb_rr_index; + if (i >= MAX_CPLBS) { + i -= MAX_CPLBS - first_switched_icplb; + icplb_rr_index -= MAX_CPLBS - first_switched_icplb; + } + icplb_rr_index++; + return i; +} + +static int evict_one_dcplb(void) +{ + int i; + for (i = first_switched_dcplb; i < MAX_CPLBS; i++) + if ((dcplb_tbl[i].data & CPLB_VALID) == 0) + return i; + i = first_switched_dcplb + dcplb_rr_index; + if (i >= MAX_CPLBS) { + i -= MAX_CPLBS - first_switched_dcplb; + dcplb_rr_index -= MAX_CPLBS - first_switched_dcplb; + } + dcplb_rr_index++; + return i; +} + +static noinline int dcplb_miss(void) +{ + unsigned long addr = bfin_read_DCPLB_FAULT_ADDR(); + int status = bfin_read_DCPLB_STATUS(); + unsigned long *mask; + int idx; + unsigned long d_data; + + nr_dcplb_miss++; + if (addr >= _ramend) + return CPLB_PROT_VIOL; + + d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB; +#ifdef CONFIG_BFIN_DCACHE + d_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND; +#ifdef CONFIG_BLKFIN_WT + d_data |= CPLB_L1_AOW | CPLB_WT; +#endif +#endif + mask = current_rwx_mask; + if (mask) { + int page = addr >> PAGE_SHIFT; + int offs = page >> 5; + int bit = 1 << (page & 31); + + if (mask[offs] & bit) + d_data |= CPLB_USER_RD; + + mask += page_mask_nelts; + if (mask[offs] & bit) + d_data |= CPLB_USER_WR; + } + + idx = evict_one_dcplb(); + + addr &= PAGE_MASK; + dcplb_tbl[idx].addr = addr; + dcplb_tbl[idx].data = d_data; + + disable_dcplb(); + bfin_write32(DCPLB_DATA0 + idx * 4, d_data); + bfin_write32(DCPLB_ADDR0 + idx * 4, addr); + enable_dcplb(); + + return 0; +} + +static noinline int icplb_miss(void) +{ + unsigned long addr = bfin_read_ICPLB_FAULT_ADDR(); + int status = bfin_read_ICPLB_STATUS(); + int idx; + unsigned long i_data; + + nr_icplb_miss++; + if (status & FAULT_USERSUPV) + nr_icplb_supv_miss++; + + if (addr >= _ramend) + return CPLB_PROT_VIOL; + + /* + * First, try to find a CPLB that matches this address. If we + * find one, then the fact that we're in the miss handler means + * that the instruction crosses a page boundary. + */ + for (idx = first_switched_icplb; idx < MAX_CPLBS; idx++) { + if (icplb_tbl[idx].data & CPLB_VALID) { + unsigned long this_addr = icplb_tbl[idx].addr; + if (this_addr <= addr && this_addr + PAGE_SIZE > addr) { + addr += PAGE_SIZE; + break; + } + } + } + + i_data = CPLB_VALID | CPLB_PORTPRIO | PAGE_SIZE_4KB; +#ifdef CONFIG_BFIN_ICACHE + i_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND; +#endif + + /* + * Two cases to distinguish - a supervisor access must necessarily + * be for a module page; we grant it unconditionally (could do better + * here in the future). Otherwise, check the x bitmap of the current + * process. + */ + if (!(status & FAULT_USERSUPV)) { + unsigned long *mask = current_rwx_mask; + + if (mask) { + int page = addr >> PAGE_SHIFT; + int offs = page >> 5; + int bit = 1 << (page & 31); + + mask += 2 * page_mask_nelts; + if (mask[offs] & bit) + i_data |= CPLB_USER_RD; + } + } + + idx = evict_one_icplb(); + addr &= PAGE_MASK; + icplb_tbl[idx].addr = addr; + icplb_tbl[idx].data = i_data; + + disable_icplb(); + bfin_write32(ICPLB_DATA0 + idx * 4, i_data); + bfin_write32(ICPLB_ADDR0 + idx * 4, addr); + enable_icplb(); + + return 0; +} + +static noinline int dcplb_protection_fault(void) +{ + unsigned long addr = bfin_read_DCPLB_FAULT_ADDR(); + int status = bfin_read_DCPLB_STATUS(); + + nr_dcplb_prot++; + + if (status & FAULT_RW) { + int idx = faulting_cplb_index(status); + unsigned long data = dcplb_tbl[idx].data; + if (!(data & CPLB_WT) && !(data & CPLB_DIRTY) && + write_permitted(status, data)) { + data |= CPLB_DIRTY; + dcplb_tbl[idx].data = data; + bfin_write32(DCPLB_DATA0 + idx * 4, data); + return 0; + } + } + return CPLB_PROT_VIOL; +} + +int cplb_hdr(int seqstat, struct pt_regs *regs) +{ + int cause = seqstat & 0x3f; + switch (cause) { + case 0x23: + return dcplb_protection_fault(); + case 0x2C: + return icplb_miss(); + case 0x26: + return dcplb_miss(); + default: + return 1; + panic_cplb_error(seqstat, regs); + } +} + +void flush_switched_cplbs(void) +{ + int i; + + nr_cplb_flush++; + + disable_icplb(); + for (i = first_switched_icplb; i < MAX_CPLBS; i++) { + icplb_tbl[i].data = 0; + bfin_write32(ICPLB_DATA0 + i * 4, 0); + } + enable_icplb(); + + disable_dcplb(); + for (i = first_mask_dcplb; i < MAX_CPLBS; i++) { + dcplb_tbl[i].data = 0; + bfin_write32(DCPLB_DATA0 + i * 4, 0); + } + enable_dcplb(); +} + +void set_mask_dcplbs(unsigned long *masks) +{ + int i; + unsigned long addr = (unsigned long)masks; + unsigned long d_data; + current_rwx_mask = masks; + + if (!masks) + return; + + d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB; +#ifdef CONFIG_BFIN_DCACHE + d_data |= CPLB_L1_CHBL; +#ifdef CONFIG_BLKFIN_WT + d_data |= CPLB_L1_AOW | CPLB_WT; +#endif +#endif + + disable_dcplb(); + for (i = first_mask_dcplb; i < first_switched_dcplb; i++) { + dcplb_tbl[i].addr = addr; + dcplb_tbl[i].data = d_data; + bfin_write32(DCPLB_DATA0 + i * 4, d_data); + bfin_write32(DCPLB_ADDR0 + i * 4, addr); + addr += PAGE_SIZE; + } + enable_dcplb(); +} + +#endif diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index a03c2dfff4a3..1a942a721d51 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -238,7 +238,12 @@ void __init setup_arch(char **cmdline_p) memory_end = _ramend - DMA_UNCACHED_REGION; _ramstart = (unsigned long)__bss_stop; +#ifdef CONFIG_MPU + /* Round up to multiple of 4MB. */ + memory_start = (_ramstart + 0x3fffff) & ~0x3fffff; +#else memory_start = PAGE_ALIGN(_ramstart); +#endif #if defined(CONFIG_MTD_UCLINUX) /* generic memory mapped MTD driver */ @@ -307,6 +312,11 @@ void __init setup_arch(char **cmdline_p) printk(KERN_NOTICE "Warning: limiting memory to %liMB due to hardware anomaly 05000263\n", memory_end >> 20); #endif /* ANOMALY_05000263 */ +#ifdef CONFIG_MPU + page_mask_nelts = ((_ramend >> PAGE_SHIFT) + 31) / 32; + page_mask_order = get_order(3 * page_mask_nelts * sizeof(long)); +#endif + #if !defined(CONFIG_MTD_UCLINUX) memory_end -= SIZE_4K; /*In case there is no valid CPLB behind memory_end make sure we don't get to close*/ #endif diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 58f7ad617992..c2e81a10c47b 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -95,24 +95,43 @@ ENTRY(_ex_workaround_261) R6 = 0x26; /* Data CPLB Miss */ cc = R6 == R7; if cc jump _ex_dcplb_miss (BP); + R6 = 0x23; /* Data CPLB Miss */ + cc = R6 == R7; + if cc jump _ex_dcplb_viol (BP); /* Handle 0x23 Data CPLB Protection Violation * and Data CPLB Multiple Hits - Linux Trap Zero */ jump _ex_trap_c; ENDPROC(_ex_workaround_261) +#else +#ifdef CONFIG_MPU +#define _ex_dviol _ex_dcplb_viol #else #define _ex_dviol _ex_trap_c +#endif #define _ex_dmiss _ex_dcplb_miss #define _ex_dmult _ex_trap_c #endif + +ENTRY(_ex_dcplb_viol) ENTRY(_ex_dcplb_miss) ENTRY(_ex_icplb_miss) (R7:6,P5:4) = [sp++]; ASTAT = [sp++]; SAVE_ALL_SYS +#ifdef CONFIG_MPU + R0 = SEQSTAT; + R1 = SP; + sp += -12; + call _cplb_hdr; + sp += 12; + CC = R0 == 0; + IF !CC JUMP _handle_bad_cplb; +#else call __cplb_hdr; +#endif DEBUG_START_HWTRACE(p5, r7) RESTORE_ALL_SYS SP = EX_SCRATCH_REG; diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c index e97ea8fc8dc4..9f007cace6e6 100644 --- a/arch/blackfin/mm/init.c +++ b/arch/blackfin/mm/init.c @@ -184,13 +184,15 @@ static __init void free_init_pages(const char *what, unsigned long begin, unsign #ifdef CONFIG_BLK_DEV_INITRD void __init free_initrd_mem(unsigned long start, unsigned long end) { +#ifndef CONFIG_MPU free_init_pages("initrd memory", start, end); +#endif } #endif void __init free_initmem(void) { -#ifdef CONFIG_RAMKERNEL +#if defined CONFIG_RAMKERNEL && !defined CONFIG_MPU free_init_pages("unused kernel memory", (unsigned long)(&__init_begin), (unsigned long)(&__init_end)); diff --git a/include/asm-blackfin/cplb-mpu.h b/include/asm-blackfin/cplb-mpu.h new file mode 100644 index 000000000000..75c67b99d607 --- /dev/null +++ b/include/asm-blackfin/cplb-mpu.h @@ -0,0 +1,61 @@ +/* + * File: include/asm-blackfin/cplbinit.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#ifndef __ASM_BFIN_CPLB_MPU_H +#define __ASM_BFIN_CPLB_MPU_H + +struct cplb_entry { + unsigned long data, addr; +}; + +struct mem_region { + unsigned long start, end; + unsigned long dcplb_data; + unsigned long icplb_data; +}; + +extern struct cplb_entry dcplb_tbl[MAX_CPLBS]; +extern struct cplb_entry icplb_tbl[MAX_CPLBS]; +extern int first_switched_icplb; +extern int first_mask_dcplb; +extern int first_switched_dcplb; + +extern int nr_dcplb_miss, nr_icplb_miss, nr_icplb_supv_miss, nr_dcplb_prot; +extern int nr_cplb_flush; + +extern int page_mask_order; +extern int page_mask_nelts; + +extern unsigned long *current_rwx_mask; + +extern void flush_switched_cplbs(void); +extern void set_mask_dcplbs(unsigned long *); + +extern void __noreturn panic_cplb_error(int seqstat, struct pt_regs *); + +#endif /* __ASM_BFIN_CPLB_MPU_H */ diff --git a/include/asm-blackfin/cplb.h b/include/asm-blackfin/cplb.h index 06828d77a58f..654375c2b746 100644 --- a/include/asm-blackfin/cplb.h +++ b/include/asm-blackfin/cplb.h @@ -65,7 +65,11 @@ #define SIZE_1M 0x00100000 /* 1M */ #define SIZE_4M 0x00400000 /* 4M */ +#ifdef CONFIG_MPU +#define MAX_CPLBS 16 +#else #define MAX_CPLBS (16 * 2) +#endif #define ASYNC_MEMORY_CPLB_COVERAGE ((ASYNC_BANK0_SIZE + ASYNC_BANK1_SIZE + \ ASYNC_BANK2_SIZE + ASYNC_BANK3_SIZE) / SIZE_4M) diff --git a/include/asm-blackfin/cplbinit.h b/include/asm-blackfin/cplbinit.h index c4d0596e8e9f..0eb1c1b685a7 100644 --- a/include/asm-blackfin/cplbinit.h +++ b/include/asm-blackfin/cplbinit.h @@ -33,6 +33,12 @@ #include #include +#ifdef CONFIG_MPU + +#include + +#else + #define INITIAL_T 0x1 #define SWITCH_T 0x2 #define I_CPLB 0x4 @@ -79,6 +85,8 @@ extern u_long ipdt_swapcount_table[]; extern u_long dpdt_swapcount_table[]; #endif +#endif /* CONFIG_MPU */ + extern unsigned long reserved_mem_dcache_on; extern unsigned long reserved_mem_icache_on; diff --git a/include/asm-blackfin/mmu.h b/include/asm-blackfin/mmu.h index 11d52f1167d0..757e43906ed4 100644 --- a/include/asm-blackfin/mmu.h +++ b/include/asm-blackfin/mmu.h @@ -24,7 +24,9 @@ typedef struct { unsigned long exec_fdpic_loadmap; unsigned long interp_fdpic_loadmap; #endif - +#ifdef CONFIG_MPU + unsigned long *page_rwx_mask; +#endif } mm_context_t; #endif diff --git a/include/asm-blackfin/mmu_context.h b/include/asm-blackfin/mmu_context.h index c5c71a6aaf19..b5eb67596ad5 100644 --- a/include/asm-blackfin/mmu_context.h +++ b/include/asm-blackfin/mmu_context.h @@ -30,9 +30,12 @@ #ifndef __BLACKFIN_MMU_CONTEXT_H__ #define __BLACKFIN_MMU_CONTEXT_H__ +#include +#include #include #include #include +#include extern void *current_l1_stack_save; extern int nr_l1stack_tasks; @@ -50,6 +53,12 @@ static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm) { +#ifdef CONFIG_MPU + unsigned long p = __get_free_pages(GFP_KERNEL, page_mask_order); + mm->context.page_rwx_mask = (unsigned long *)p; + memset(mm->context.page_rwx_mask, 0, + page_mask_nelts * 3 * sizeof(long)); +#endif return 0; } @@ -73,6 +82,11 @@ static inline void destroy_context(struct mm_struct *mm) sram_free(tmp->addr); kfree(tmp); } +#ifdef CONFIG_MPU + if (current_rwx_mask == mm->context.page_rwx_mask) + current_rwx_mask = NULL; + free_pages((unsigned long)mm->context.page_rwx_mask, page_mask_order); +#endif } static inline unsigned long @@ -106,9 +120,21 @@ activate_l1stack(struct mm_struct *mm, unsigned long sp_base) #define deactivate_mm(tsk,mm) do { } while (0) -static inline void activate_mm(struct mm_struct *prev_mm, - struct mm_struct *next_mm) +#define activate_mm(prev, next) switch_mm(prev, next, NULL) + +static inline void switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm, + struct task_struct *tsk) { + if (prev_mm == next_mm) + return; +#ifdef CONFIG_MPU + if (prev_mm->context.page_rwx_mask == current_rwx_mask) { + flush_switched_cplbs(); + set_mask_dcplbs(next_mm->context.page_rwx_mask); + } +#endif + + /* L1 stack switching. */ if (!next_mm->context.l1_stack_save) return; if (next_mm->context.l1_stack_save == current_l1_stack_save) @@ -120,10 +146,36 @@ static inline void activate_mm(struct mm_struct *prev_mm, memcpy(l1_stack_base, current_l1_stack_save, l1_stack_len); } -static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, - struct task_struct *tsk) +#ifdef CONFIG_MPU +static inline void protect_page(struct mm_struct *mm, unsigned long addr, + unsigned long flags) +{ + unsigned long *mask = mm->context.page_rwx_mask; + unsigned long page = addr >> 12; + unsigned long idx = page >> 5; + unsigned long bit = 1 << (page & 31); + + if (flags & VM_MAYREAD) + mask[idx] |= bit; + else + mask[idx] &= ~bit; + mask += page_mask_nelts; + if (flags & VM_MAYWRITE) + mask[idx] |= bit; + else + mask[idx] &= ~bit; + mask += page_mask_nelts; + if (flags & VM_MAYEXEC) + mask[idx] |= bit; + else + mask[idx] &= ~bit; +} + +static inline void update_protections(struct mm_struct *mm) { - activate_mm(prev, next); + flush_switched_cplbs(); + set_mask_dcplbs(mm->context.page_rwx_mask); } +#endif #endif -- cgit v1.2.3-59-g8ed1b From acbcd2631975cf6f0be5cd294cbfd12226cd9958 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 22 Jan 2008 18:36:20 +0800 Subject: [Blackfin] arch: Fix BUG gpio_direction_output API is not compatitable with GENERIC_GPIO API interface signef-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/kernel/bfin_gpio.c | 55 +++++++++++++++++------ arch/blackfin/mach-bf527/boards/ezkit.c | 7 +-- arch/blackfin/mach-bf537/boards/generic_board.c | 6 +-- arch/blackfin/mach-bf537/boards/pnav10.c | 6 +-- arch/blackfin/mach-bf537/boards/stamp.c | 7 +-- drivers/video/bf54x-lq043fb.c | 3 +- include/asm-blackfin/gpio.h | 12 ++--- include/asm-blackfin/mach-bf527/bfin_serial_5xx.h | 2 +- include/asm-blackfin/mach-bf533/bfin_serial_5xx.h | 2 +- include/asm-blackfin/mach-bf537/bfin_serial_5xx.h | 2 +- include/asm-blackfin/mach-bf548/bfin_serial_5xx.h | 2 +- include/asm-blackfin/mach-bf561/bfin_serial_5xx.h | 2 +- 12 files changed, 58 insertions(+), 48 deletions(-) diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index ffee36910288..7312011a4211 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -229,6 +229,11 @@ inline int check_gpio(unsigned short gpio) } #endif +void gpio_error(unsigned gpio) +{ + printk(KERN_ERR "bfin-gpio: GPIO %d wasn't requested!\n", gpio); +} + static void set_label(unsigned short ident, const char *label) { @@ -1034,7 +1039,7 @@ EXPORT_SYMBOL(peripheral_free_list); * MODIFICATION HISTORY : **************************************************************/ -int gpio_request(unsigned short gpio, const char *label) +int gpio_request(unsigned gpio, const char *label) { unsigned long flags; @@ -1081,7 +1086,7 @@ int gpio_request(unsigned short gpio, const char *label) } EXPORT_SYMBOL(gpio_request); -void gpio_free(unsigned short gpio) +void gpio_free(unsigned gpio) { unsigned long flags; @@ -1091,7 +1096,7 @@ void gpio_free(unsigned short gpio) local_irq_save(flags); if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) { - printk(KERN_ERR "bfin-gpio: GPIO %d wasn't reserved!\n", gpio); + gpio_error(gpio); dump_stack(); local_irq_restore(flags); return; @@ -1107,34 +1112,47 @@ void gpio_free(unsigned short gpio) } EXPORT_SYMBOL(gpio_free); + #ifdef BF548_FAMILY -void gpio_direction_input(unsigned short gpio) +int gpio_direction_input(unsigned gpio) { unsigned long flags; - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); + if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + gpio_error(gpio); + return -EINVAL; + } + local_irq_save(flags); gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio); gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio); local_irq_restore(flags); + + return 0; } EXPORT_SYMBOL(gpio_direction_input); -void gpio_direction_output(unsigned short gpio) +int gpio_direction_output(unsigned gpio, int value) { unsigned long flags; - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); + if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + gpio_error(gpio); + return -EINVAL; + } local_irq_save(flags); gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio); + gpio_set_value(gpio, value); gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio); local_irq_restore(flags); + + return 0; } EXPORT_SYMBOL(gpio_direction_output); -void gpio_set_value(unsigned short gpio, unsigned short arg) +void gpio_set_value(unsigned gpio, int arg) { if (arg) gpio_array[gpio_bank(gpio)]->port_set = gpio_bit(gpio); @@ -1144,7 +1162,7 @@ void gpio_set_value(unsigned short gpio, unsigned short arg) } EXPORT_SYMBOL(gpio_set_value); -unsigned short gpio_get_value(unsigned short gpio) +int gpio_get_value(unsigned gpio) { return (1 & (gpio_array[gpio_bank(gpio)]->port_data >> gpio_sub_n(gpio))); } @@ -1152,31 +1170,42 @@ EXPORT_SYMBOL(gpio_get_value); #else -void gpio_direction_input(unsigned short gpio) +int gpio_direction_input(unsigned gpio) { unsigned long flags; - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); + if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + gpio_error(gpio); + return -EINVAL; + } local_irq_save(flags); gpio_bankb[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); gpio_bankb[gpio_bank(gpio)]->inen |= gpio_bit(gpio); AWA_DUMMY_READ(inen); local_irq_restore(flags); + + return 0; } EXPORT_SYMBOL(gpio_direction_input); -void gpio_direction_output(unsigned short gpio) +int gpio_direction_output(unsigned gpio, int value) { unsigned long flags; - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); + if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + gpio_error(gpio); + return -EINVAL; + } local_irq_save(flags); gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); + gpio_set_value(gpio, value); gpio_bankb[gpio_bank(gpio)]->dir |= gpio_bit(gpio); AWA_DUMMY_READ(dir); local_irq_restore(flags); + + return 0; } EXPORT_SYMBOL(gpio_direction_output); diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index bc256811a5e3..6d70aae4cc9b 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -317,12 +317,7 @@ static struct resource sl811_hcd_resources[] = { void sl811_port_power(struct device *dev, int is_on) { gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); - gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS); - - if (is_on) - gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1); - else - gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0); + gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); } #endif diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index 1c97219a2ab5..3225b1588398 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -205,12 +205,8 @@ static struct resource sl811_hcd_resources[] = { void sl811_port_power(struct device *dev, int is_on) { gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); - gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS); + gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); - if (is_on) - gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1); - else - gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0); } #endif diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 23e10c7dab5b..4c4870590bd8 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -134,12 +134,8 @@ static struct resource sl811_hcd_resources[] = { void sl811_port_power(struct device *dev, int is_on) { gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); - gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS); + gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); - if (is_on) - gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1); - else - gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0); } #endif diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 3e0ad04d8d75..37759ac7df2a 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -250,12 +250,7 @@ static struct resource sl811_hcd_resources[] = { void sl811_port_power(struct device *dev, int is_on) { gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); - gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS); - - if (is_on) - gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1); - else - gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0); + gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); } #endif diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c index 1b7e54de0d76..c8e7427a0bc8 100644 --- a/drivers/video/bf54x-lq043fb.c +++ b/drivers/video/bf54x-lq043fb.c @@ -264,8 +264,7 @@ static int request_ports(struct bfin_bf54xfb_info *fbi) } } - gpio_direction_output(disp); - gpio_set_value(disp, 1); + gpio_direction_output(disp, 1); return 0; } diff --git a/include/asm-blackfin/gpio.h b/include/asm-blackfin/gpio.h index 33ce98ef7e0f..7bba9b17654e 100644 --- a/include/asm-blackfin/gpio.h +++ b/include/asm-blackfin/gpio.h @@ -426,19 +426,19 @@ struct gpio_port_s { * MODIFICATION HISTORY : **************************************************************/ -int gpio_request(unsigned short, const char *); -void gpio_free(unsigned short); +int gpio_request(unsigned, const char *); +void gpio_free(unsigned); -void gpio_set_value(unsigned short gpio, unsigned short arg); -unsigned short gpio_get_value(unsigned short gpio); +void gpio_set_value(unsigned gpio, int arg); +int gpio_get_value(unsigned gpio); #ifndef BF548_FAMILY #define gpio_get_value(gpio) get_gpio_data(gpio) #define gpio_set_value(gpio, value) set_gpio_data(gpio, value) #endif -void gpio_direction_input(unsigned short gpio); -void gpio_direction_output(unsigned short gpio); +int gpio_direction_input(unsigned gpio); +int gpio_direction_output(unsigned gpio, int value); #include /* cansleep wrappers */ #include diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h index 0b867e6a76c4..15dbc21eed8b 100644 --- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h @@ -146,7 +146,7 @@ static void bfin_serial_hw_init(struct bfin_serial_port *uart) if (uart->rts_pin >= 0) { gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_output(uart->rts_pin); + gpio_direction_output(uart->rts_pin, 0); } #endif } diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h index 69b9f8e120e9..7871d4313f49 100644 --- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h @@ -111,7 +111,7 @@ static void bfin_serial_hw_init(struct bfin_serial_port *uart) } if (uart->rts_pin >= 0) { gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_input(uart->rts_pin); + gpio_direction_input(uart->rts_pin, 0); } #endif } diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h index 6fb328f5186a..86e45c379838 100644 --- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h @@ -146,7 +146,7 @@ static void bfin_serial_hw_init(struct bfin_serial_port *uart) if (uart->rts_pin >= 0) { gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_output(uart->rts_pin); + gpio_direction_output(uart->rts_pin, 0); } #endif } diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h index f21a1620e6bd..3770aa38ee9f 100644 --- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h @@ -186,7 +186,7 @@ static void bfin_serial_hw_init(struct bfin_serial_port *uart) if (uart->rts_pin >= 0) { gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_output(uart->rts_pin); + gpio_direction_output(uart->rts_pin, 0); } #endif } diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h index 69b9f8e120e9..7871d4313f49 100644 --- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h @@ -111,7 +111,7 @@ static void bfin_serial_hw_init(struct bfin_serial_port *uart) } if (uart->rts_pin >= 0) { gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_input(uart->rts_pin); + gpio_direction_input(uart->rts_pin, 0); } #endif } -- cgit v1.2.3-59-g8ed1b From a2c8cfef6abb33ee49d80c58391ebfc4f94221ef Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 22 Jan 2008 17:20:10 +0800 Subject: [Blackfin] arch: GPIO API cleanup and anomaly update - Add anomaly workaround for bfin_gpio_reset_spi0_ssel1 - Fix style - Update copyright - Remove BUG_ON checks for functions intended to be used only by arch support. GPIO users should only access using the generic GPIO API - Make all GPIO identifier unsigned int Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/kernel/bfin_gpio.c | 63 ++++++++++++++++------------------- include/asm-blackfin/gpio.h | 72 ++++++++++++++++++++-------------------- 2 files changed, 64 insertions(+), 71 deletions(-) diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 7312011a4211..6bbe0a2fccb8 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -7,7 +7,7 @@ * Description: GPIO Abstraction Layer * * Modified: - * Copyright 2007 Analog Devices Inc. + * Copyright 2008 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -137,7 +137,6 @@ static unsigned short *port_fer[gpio_bank(MAX_BLACKFIN_GPIOS)] = { (unsigned short *) PORTG_FER, (unsigned short *) PORTH_FER, }; - #endif #ifdef BF527_FAMILY @@ -211,7 +210,7 @@ static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG0_INT #endif /* CONFIG_PM */ #if defined(BF548_FAMILY) -inline int check_gpio(unsigned short gpio) +inline int check_gpio(unsigned gpio) { if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 || gpio == GPIO_PH14 || gpio == GPIO_PH15 @@ -221,7 +220,7 @@ inline int check_gpio(unsigned short gpio) return 0; } #else -inline int check_gpio(unsigned short gpio) +inline int check_gpio(unsigned gpio) { if (gpio >= MAX_BLACKFIN_GPIOS) return -EINVAL; @@ -236,7 +235,6 @@ void gpio_error(unsigned gpio) static void set_label(unsigned short ident, const char *label) { - if (label && str_ident) { strncpy(str_ident[ident].name, label, RESOURCE_LABEL_SIZE); @@ -267,7 +265,7 @@ static int cmp_label(unsigned short ident, const char *label) } #if defined(BF527_FAMILY) || defined(BF537_FAMILY) -static void port_setup(unsigned short gpio, unsigned short usage) +static void port_setup(unsigned gpio, unsigned short usage) { if (!check_gpio(gpio)) { if (usage == GPIO_USAGE) @@ -278,7 +276,7 @@ static void port_setup(unsigned short gpio, unsigned short usage) } } #elif defined(BF548_FAMILY) -static void port_setup(unsigned short gpio, unsigned short usage) +static void port_setup(unsigned gpio, unsigned short usage) { if (usage == GPIO_USAGE) gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio); @@ -399,7 +397,7 @@ inline void portmux_setup(unsigned short portno, unsigned short function) #endif #ifndef BF548_FAMILY -static void default_gpio(unsigned short gpio) +static void default_gpio(unsigned gpio) { unsigned short bank, bitmask; unsigned long flags; @@ -419,7 +417,6 @@ static void default_gpio(unsigned short gpio) gpio_bankb[bank]->edge &= ~bitmask; AWA_DUMMY_READ(edge); local_irq_restore(flags); - } #else # define default_gpio(...) do { } while (0) @@ -457,10 +454,9 @@ arch_initcall(bfin_gpio_init); /* Set a specific bit */ #define SET_GPIO(name) \ -void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \ +void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ { \ unsigned long flags; \ - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); \ local_irq_save(flags); \ if (arg) \ gpio_bankb[gpio_bank(gpio)]->name |= gpio_bit(gpio); \ @@ -480,10 +476,9 @@ SET_GPIO(both) #if ANOMALY_05000311 || ANOMALY_05000323 #define SET_GPIO_SC(name) \ -void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \ +void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ { \ unsigned long flags; \ - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); \ local_irq_save(flags); \ if (arg) \ gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ @@ -495,9 +490,8 @@ void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \ EXPORT_SYMBOL(set_gpio_ ## name); #else #define SET_GPIO_SC(name) \ -void set_gpio_ ## name(unsigned short gpio, unsigned short arg) \ +void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ { \ - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); \ if (arg) \ gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ else \ @@ -511,19 +505,17 @@ SET_GPIO_SC(maskb) SET_GPIO_SC(data) #if ANOMALY_05000311 || ANOMALY_05000323 -void set_gpio_toggle(unsigned short gpio) +void set_gpio_toggle(unsigned gpio) { unsigned long flags; - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); local_irq_save(flags); gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio); AWA_DUMMY_READ(toggle); local_irq_restore(flags); } #else -void set_gpio_toggle(unsigned short gpio) +void set_gpio_toggle(unsigned gpio) { - BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))); gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio); } #endif @@ -534,7 +526,7 @@ EXPORT_SYMBOL(set_gpio_toggle); #if ANOMALY_05000311 || ANOMALY_05000323 #define SET_GPIO_P(name) \ -void set_gpiop_ ## name(unsigned short gpio, unsigned short arg) \ +void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \ { \ unsigned long flags; \ local_irq_save(flags); \ @@ -545,7 +537,7 @@ void set_gpiop_ ## name(unsigned short gpio, unsigned short arg) \ EXPORT_SYMBOL(set_gpiop_ ## name); #else #define SET_GPIO_P(name) \ -void set_gpiop_ ## name(unsigned short gpio, unsigned short arg) \ +void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \ { \ gpio_bankb[gpio_bank(gpio)]->name = arg; \ } \ @@ -561,11 +553,10 @@ SET_GPIO_P(both) SET_GPIO_P(maska) SET_GPIO_P(maskb) - /* Get a specific bit */ #if ANOMALY_05000311 || ANOMALY_05000323 #define GET_GPIO(name) \ -unsigned short get_gpio_ ## name(unsigned short gpio) \ +unsigned short get_gpio_ ## name(unsigned gpio) \ { \ unsigned long flags; \ unsigned short ret; \ @@ -578,7 +569,7 @@ unsigned short get_gpio_ ## name(unsigned short gpio) \ EXPORT_SYMBOL(get_gpio_ ## name); #else #define GET_GPIO(name) \ -unsigned short get_gpio_ ## name(unsigned short gpio) \ +unsigned short get_gpio_ ## name(unsigned gpio) \ { \ return (0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio))); \ } \ @@ -598,7 +589,7 @@ GET_GPIO(maskb) #if ANOMALY_05000311 || ANOMALY_05000323 #define GET_GPIO_P(name) \ -unsigned short get_gpiop_ ## name(unsigned short gpio) \ +unsigned short get_gpiop_ ## name(unsigned gpio) \ { \ unsigned long flags; \ unsigned short ret; \ @@ -611,7 +602,7 @@ unsigned short get_gpiop_ ## name(unsigned short gpio) \ EXPORT_SYMBOL(get_gpiop_ ## name); #else #define GET_GPIO_P(name) \ -unsigned short get_gpiop_ ## name(unsigned short gpio) \ +unsigned short get_gpiop_ ## name(unsigned gpio) \ { \ return (gpio_bankb[gpio_bank(gpio)]->name);\ } \ @@ -648,7 +639,7 @@ GET_GPIO_P(maskb) ************************************************************* * MODIFICATION HISTORY : **************************************************************/ -int gpio_pm_wakeup_request(unsigned short gpio, unsigned char type) +int gpio_pm_wakeup_request(unsigned gpio, unsigned char type) { unsigned long flags; @@ -656,7 +647,6 @@ int gpio_pm_wakeup_request(unsigned short gpio, unsigned char type) return -EINVAL; local_irq_save(flags); - wakeup_map[gpio_bank(gpio)] |= gpio_bit(gpio); wakeup_flags_map[gpio] = type; local_irq_restore(flags); @@ -665,7 +655,7 @@ int gpio_pm_wakeup_request(unsigned short gpio, unsigned char type) } EXPORT_SYMBOL(gpio_pm_wakeup_request); -void gpio_pm_wakeup_free(unsigned short gpio) +void gpio_pm_wakeup_free(unsigned gpio) { unsigned long flags; @@ -680,7 +670,7 @@ void gpio_pm_wakeup_free(unsigned short gpio) } EXPORT_SYMBOL(gpio_pm_wakeup_free); -static int bfin_gpio_wakeup_type(unsigned short gpio, unsigned char type) +static int bfin_gpio_wakeup_type(unsigned gpio, unsigned char type) { port_setup(gpio, GPIO_USAGE); set_gpio_dir(gpio, 0); @@ -789,7 +779,7 @@ void gpio_pm_restore(void) #endif #else /* BF548_FAMILY */ -unsigned short get_gpio_dir(unsigned short gpio) +unsigned short get_gpio_dir(unsigned gpio) { return (0x01 & (gpio_array[gpio_bank(gpio)]->port_dir_clear >> gpio_sub_n(gpio))); } @@ -1123,7 +1113,6 @@ int gpio_direction_input(unsigned gpio) return -EINVAL; } - local_irq_save(flags); gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio); gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio); @@ -1158,7 +1147,6 @@ void gpio_set_value(unsigned gpio, int arg) gpio_array[gpio_bank(gpio)]->port_set = gpio_bit(gpio); else gpio_array[gpio_bank(gpio)]->port_clear = gpio_bit(gpio); - } EXPORT_SYMBOL(gpio_set_value); @@ -1200,7 +1188,12 @@ int gpio_direction_output(unsigned gpio, int value) local_irq_save(flags); gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); - gpio_set_value(gpio, value); + + if (value) + gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio); + else + gpio_bankb[gpio_bank(gpio)]->data_clear = gpio_bit(gpio); + gpio_bankb[gpio_bank(gpio)]->dir |= gpio_bit(gpio); AWA_DUMMY_READ(dir); local_irq_restore(flags); @@ -1225,6 +1218,7 @@ void bfin_gpio_reset_spi0_ssel1(void) port_setup(gpio, GPIO_USAGE); gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio); + AWA_DUMMY_READ(data_set); udelay(1); } @@ -1259,6 +1253,5 @@ static __init int gpio_register_proc(void) proc_gpio->read_proc = gpio_proc_read; return proc_gpio != NULL; } - __initcall(gpio_register_proc); #endif diff --git a/include/asm-blackfin/gpio.h b/include/asm-blackfin/gpio.h index 7bba9b17654e..d0426c108262 100644 --- a/include/asm-blackfin/gpio.h +++ b/include/asm-blackfin/gpio.h @@ -7,7 +7,7 @@ * Description: * * Modified: - * Copyright 2004-2006 Analog Devices Inc. + * Copyright 2004-2008 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -304,39 +304,39 @@ **************************************************************/ #ifndef BF548_FAMILY -void set_gpio_dir(unsigned short, unsigned short); -void set_gpio_inen(unsigned short, unsigned short); -void set_gpio_polar(unsigned short, unsigned short); -void set_gpio_edge(unsigned short, unsigned short); -void set_gpio_both(unsigned short, unsigned short); -void set_gpio_data(unsigned short, unsigned short); -void set_gpio_maska(unsigned short, unsigned short); -void set_gpio_maskb(unsigned short, unsigned short); -void set_gpio_toggle(unsigned short); -void set_gpiop_dir(unsigned short, unsigned short); -void set_gpiop_inen(unsigned short, unsigned short); -void set_gpiop_polar(unsigned short, unsigned short); -void set_gpiop_edge(unsigned short, unsigned short); -void set_gpiop_both(unsigned short, unsigned short); -void set_gpiop_data(unsigned short, unsigned short); -void set_gpiop_maska(unsigned short, unsigned short); -void set_gpiop_maskb(unsigned short, unsigned short); -unsigned short get_gpio_dir(unsigned short); -unsigned short get_gpio_inen(unsigned short); -unsigned short get_gpio_polar(unsigned short); -unsigned short get_gpio_edge(unsigned short); -unsigned short get_gpio_both(unsigned short); -unsigned short get_gpio_maska(unsigned short); -unsigned short get_gpio_maskb(unsigned short); -unsigned short get_gpio_data(unsigned short); -unsigned short get_gpiop_dir(unsigned short); -unsigned short get_gpiop_inen(unsigned short); -unsigned short get_gpiop_polar(unsigned short); -unsigned short get_gpiop_edge(unsigned short); -unsigned short get_gpiop_both(unsigned short); -unsigned short get_gpiop_maska(unsigned short); -unsigned short get_gpiop_maskb(unsigned short); -unsigned short get_gpiop_data(unsigned short); +void set_gpio_dir(unsigned, unsigned short); +void set_gpio_inen(unsigned, unsigned short); +void set_gpio_polar(unsigned, unsigned short); +void set_gpio_edge(unsigned, unsigned short); +void set_gpio_both(unsigned, unsigned short); +void set_gpio_data(unsigned, unsigned short); +void set_gpio_maska(unsigned, unsigned short); +void set_gpio_maskb(unsigned, unsigned short); +void set_gpio_toggle(unsigned); +void set_gpiop_dir(unsigned, unsigned short); +void set_gpiop_inen(unsigned, unsigned short); +void set_gpiop_polar(unsigned, unsigned short); +void set_gpiop_edge(unsigned, unsigned short); +void set_gpiop_both(unsigned, unsigned short); +void set_gpiop_data(unsigned, unsigned short); +void set_gpiop_maska(unsigned, unsigned short); +void set_gpiop_maskb(unsigned, unsigned short); +unsigned short get_gpio_dir(unsigned); +unsigned short get_gpio_inen(unsigned); +unsigned short get_gpio_polar(unsigned); +unsigned short get_gpio_edge(unsigned); +unsigned short get_gpio_both(unsigned); +unsigned short get_gpio_maska(unsigned); +unsigned short get_gpio_maskb(unsigned); +unsigned short get_gpio_data(unsigned); +unsigned short get_gpiop_dir(unsigned); +unsigned short get_gpiop_inen(unsigned); +unsigned short get_gpiop_polar(unsigned); +unsigned short get_gpiop_edge(unsigned); +unsigned short get_gpiop_both(unsigned); +unsigned short get_gpiop_maska(unsigned); +unsigned short get_gpiop_maskb(unsigned); +unsigned short get_gpiop_data(unsigned); struct gpio_port_t { unsigned short data; @@ -382,8 +382,8 @@ struct gpio_port_t { #define PM_WAKE_LOW 0x8 #define PM_WAKE_BOTH_EDGES (PM_WAKE_RISING | PM_WAKE_FALLING) -int gpio_pm_wakeup_request(unsigned short gpio, unsigned char type); -void gpio_pm_wakeup_free(unsigned short gpio); +int gpio_pm_wakeup_request(unsigned gpio, unsigned char type); +void gpio_pm_wakeup_free(unsigned gpio); unsigned int gpio_pm_setup(void); void gpio_pm_restore(void); -- cgit v1.2.3-59-g8ed1b From a628a8bcd8a6daea6096fe781fc36cae4ac1ed48 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 22 Jan 2008 17:29:16 +0800 Subject: [Blackfin] arch: Update copyright date Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf527/boards/ezkit.c | 2 +- arch/blackfin/mach-bf537/boards/generic_board.c | 2 +- arch/blackfin/mach-bf537/boards/pnav10.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 6d70aae4cc9b..f8c411a24af7 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -8,7 +8,7 @@ * * Modified: * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2007 Analog Devices Inc. + * Copyright 2004-2008 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index 3225b1588398..3e52f3f5bd58 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -8,7 +8,7 @@ * * Modified: * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2007 Analog Devices Inc. + * Copyright 2004-2008 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 4c4870590bd8..509a8a236fd0 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -8,7 +8,7 @@ * * Modified: * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2006 Analog Devices Inc. + * Copyright 2004-2008 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * -- cgit v1.2.3-59-g8ed1b From 444ad82bc3eaa554be40d22dc248e58aeefd54d9 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 22 Jan 2008 18:38:02 +0800 Subject: [Blackfin] arch: Add proper SW System Reset delay sequence Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/kernel/reboot.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/arch/blackfin/kernel/reboot.c b/arch/blackfin/kernel/reboot.c index 06501a594dda..483f93dfc1b5 100644 --- a/arch/blackfin/kernel/reboot.c +++ b/arch/blackfin/kernel/reboot.c @@ -19,6 +19,11 @@ #define SYSCR_VAL 0x10 #endif +/* + * Delay min 5 SCLK cycles using worst case CCLK/SCLK ratio (15) + */ +#define SWRST_DELAY (5 * 15) + /* A system soft reset makes external memory unusable * so force this function into L1. */ @@ -34,11 +39,15 @@ void bfin_reset(void) while (1) { /* initiate system soft reset with magic 0x7 */ bfin_write_SWRST(0x7); - bfin_read_SWRST(); - asm("ssync;"); + + /* Wait for System reset to actually reset, needs to be 5 SCLKs, */ + /* Assume CCLK / SCLK ratio is worst case (15), and use 5*15 */ + + asm("LSETUP(.Lfoo,.Lfoo) LC0 = %0\n .Lfoo: NOP;\n" + : : "a" (SWRST_DELAY) : "LC0", "LT0", "LB0"); + /* clear system soft reset */ bfin_write_SWRST(0); - bfin_read_SWRST(); asm("ssync;"); /* issue core reset */ asm("raise 1"); -- cgit v1.2.3-59-g8ed1b From 03c5732855300f05aac718ca770c2bb05e1fd48b Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Tue, 22 Jan 2008 18:45:10 +0800 Subject: [Blackfin] arch: Fix bug Only RTC interrupt can wake up deeper sleep core. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- arch/blackfin/Kconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 6b96d7d21aea..ecb356ed8db8 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -923,10 +923,10 @@ endchoice config PM_WAKEUP_SIC_IWR hex "Wakeup Events (SIC_IWR)" depends on PM_WAKEUP_GPIO_BY_SIC_IWR - default 0x80000000 if (BF537 || BF536 || BF534) - default 0x100000 if (BF533 || BF532 || BF531) - default 0x800000 if (BF54x) - default 0x800000 if (BF52x) + default 0x8 if (BF537 || BF536 || BF534) + default 0x80 if (BF533 || BF532 || BF531) + default 0x80 if (BF54x) + default 0x80 if (BF52x) config PM_WAKEUP_GPIO_NUMBER int "Wakeup GPIO number" -- cgit v1.2.3-59-g8ed1b From 96a5c6f9bef027e1187b2f168bb3e08ef21d0b6f Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 22 Jan 2008 19:23:50 +0800 Subject: [Blackfin] arch: Fix bug - kernel build with Debug option enabled fails to boot up writes to I/DMEM_CONTROL must be followed by SSYNC Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/kernel/cplb-nompu/cacheinit.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/blackfin/kernel/cplb-nompu/cacheinit.c b/arch/blackfin/kernel/cplb-nompu/cacheinit.c index 62cbba7364b0..8a18399f6072 100644 --- a/arch/blackfin/kernel/cplb-nompu/cacheinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cacheinit.c @@ -42,6 +42,7 @@ void bfin_icache_init(void) ctrl = bfin_read_IMEM_CONTROL(); ctrl |= IMC | ENICPLB; bfin_write_IMEM_CONTROL(ctrl); + SSYNC(); } #endif @@ -63,5 +64,6 @@ void bfin_dcache_init(void) ctrl = bfin_read_DMEM_CONTROL(); ctrl |= DMEM_CNTR; bfin_write_DMEM_CONTROL(ctrl); + SSYNC(); } #endif -- cgit v1.2.3-59-g8ed1b From de8c43f2fca9bb06f3ee87b38a61d5d9966ce221 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 24 Jan 2008 17:14:04 +0800 Subject: [Blackfin] arch: use common flash driver to setup partitions rather than the bf5xx-flash driver Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/Kconfig | 5 ---- arch/blackfin/mach-bf533/boards/stamp.c | 52 +++++++++++++++++++++++++++++---- arch/blackfin/mach-bf537/boards/stamp.c | 45 ++++++++++++++++++++++++++++ arch/blackfin/mach-bf548/boards/ezkit.c | 40 +++++++++++++++++++++++++ arch/blackfin/mach-bf561/boards/ezkit.c | 42 ++++++++++++++++++++++++++ 5 files changed, 174 insertions(+), 10 deletions(-) diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index ecb356ed8db8..fc7ca86ac8bf 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -268,11 +268,6 @@ config MEM_MT48LC32M16A2TG_75 depends on (BFIN527_EZKIT) default y -config BFIN_SHARED_FLASH_ENET - bool - depends on (BFIN533_STAMP) - default y - source "arch/blackfin/mach-bf527/Kconfig" source "arch/blackfin/mach-bf533/Kconfig" source "arch/blackfin/mach-bf561/Kconfig" diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index cd87df730ef5..ac52b040b336 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) @@ -108,6 +109,50 @@ static struct platform_device net2272_bfin_device = { }; #endif +static struct mtd_partition stamp_partitions[] = { + { + .name = "Bootloader", + .size = 0x20000, + .offset = 0, + }, { + .name = "Kernel", + .size = 0xE0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "RootFS", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data stamp_flash_data = { + .width = 2, + .parts = stamp_partitions, + .nr_parts = ARRAY_SIZE(stamp_partitions), +}; + +static struct resource stamp_flash_resource[] = { + { + .name = "cfi_probe", + .start = 0x20000000, + .end = 0x203fffff, + .flags = IORESOURCE_MEM, + }, { + .start = CONFIG_ENET_FLASH_PIN, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device stamp_flash_device = { + .name = "BF5xx-Flash", + .id = 0, + .dev = { + .platform_data = &stamp_flash_data, + }, + .num_resources = ARRAY_SIZE(stamp_flash_resource), + .resource = stamp_flash_resource, +}; + #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* all SPI peripherals info goes here */ @@ -457,6 +502,7 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) &i2c_gpio_device, #endif + &stamp_flash_device, }; static int __init stamp_init(void) @@ -469,12 +515,10 @@ static int __init stamp_init(void) return ret; #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) -# if defined(CONFIG_BFIN_SHARED_FLASH_ENET) /* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */ bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (1 << CONFIG_ENET_FLASH_PIN)); bfin_write_FIO_FLAG_S(1 << CONFIG_ENET_FLASH_PIN); SSYNC(); -# endif #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) @@ -491,10 +535,8 @@ arch_initcall(stamp_init); void native_machine_restart(char *cmd) { -#if defined(CONFIG_BFIN_SHARED_FLASH_ENET) -# define BIT_TO_SET (1 << CONFIG_ENET_FLASH_PIN) +#define BIT_TO_SET (1 << CONFIG_ENET_FLASH_PIN) bfin_write_FIO_INEN(~BIT_TO_SET); bfin_write_FIO_DIR(BIT_TO_SET); bfin_write_FIO_FLAG_C(BIT_TO_SET); -#endif } diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 37759ac7df2a..772541548b76 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) @@ -339,6 +340,49 @@ static struct platform_device net2272_bfin_device = { }; #endif +static struct mtd_partition stamp_partitions[] = { + { + .name = "Bootloader", + .size = 0x20000, + .offset = 0, + }, { + .name = "Kernel", + .size = 0xE0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "RootFS", + .size = 0x400000 - 0x20000 - 0xE0000 - 0x10000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "MAC Address", + .size = MTDPART_SIZ_FULL, + .offset = 0x3F0000, + .mask_flags = MTD_WRITEABLE, + } +}; + +static struct physmap_flash_data stamp_flash_data = { + .width = 2, + .parts = stamp_partitions, + .nr_parts = ARRAY_SIZE(stamp_partitions), +}; + +static struct resource stamp_flash_resource = { + .start = 0x20000000, + .end = 0x203fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device stamp_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &stamp_flash_data, + }, + .num_resources = 1, + .resource = &stamp_flash_resource, +}; + #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* all SPI peripherals info goes here */ @@ -761,6 +805,7 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif + &stamp_flash_device, }; static int __init stamp_init(void) diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 4ca3288fd07c..14860f04d1bd 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include #include @@ -327,6 +328,44 @@ static struct platform_device bf54x_sdh_device = { }; #endif +static struct mtd_partition ezkit_partitions[] = { + { + .name = "Bootloader", + .size = 0x20000, + .offset = 0, + }, { + .name = "Kernel", + .size = 0xE0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "RootFS", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data ezkit_flash_data = { + .width = 2, + .parts = ezkit_partitions, + .nr_parts = ARRAY_SIZE(ezkit_partitions), +}; + +static struct resource ezkit_flash_resource = { + .start = 0x20000000, + .end = 0x20ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ezkit_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &ezkit_flash_data, + }, + .num_resources = 1, + .resource = &ezkit_flash_resource, +}; + #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* all SPI peripherals info goes here */ #if defined(CONFIG_MTD_M25P80) \ @@ -589,6 +628,7 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif + &ezkit_flash_device, }; static int __init stamp_init(void) diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 36114dd4ab3a..7601c3be1b5c 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -29,6 +29,9 @@ #include #include +#include +#include +#include #include #include #include @@ -155,6 +158,44 @@ static struct platform_device bfin_uart_device = { }; #endif +static struct mtd_partition ezkit_partitions[] = { + { + .name = "Bootloader", + .size = 0x20000, + .offset = 0, + }, { + .name = "Kernel", + .size = 0xE0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "RootFS", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data ezkit_flash_data = { + .width = 2, + .parts = ezkit_partitions, + .nr_parts = ARRAY_SIZE(ezkit_partitions), +}; + +static struct resource ezkit_flash_resource = { + .start = 0x20000000, + .end = 0x207fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ezkit_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &ezkit_flash_data, + }, + .num_resources = 1, + .resource = &ezkit_flash_resource, +}; + #ifdef CONFIG_SPI_BFIN #if defined(CONFIG_SND_BLACKFIN_AD1836) \ || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) @@ -318,6 +359,7 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) &i2c_gpio_device, #endif + &ezkit_flash_device, }; static int __init ezkit_init(void) -- cgit v1.2.3-59-g8ed1b From ee7883b7466e721a72edacbcba2fe9cf449d82b2 Mon Sep 17 00:00:00 2001 From: Yi Li Date: Sun, 27 Jan 2008 19:56:17 +0800 Subject: [Blackfin] arch: fix bug kernel boot message: memory information is not reasonable Some of the information in kernel boot message is not reasonable. http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3846 - use _rambase as the start of kernel image. kernel is in the region [_rambase, _ramstart] - count in pages in per-cpu-page list as available memory - reserved memory now include: [0 - 4K] for bad pointer catching, memory reserved for abnormaly 05000263, memory reserved by kernel itself. Signed-off-by: Yi Li Signed-off-by: Bryan Wu --- arch/blackfin/kernel/setup.c | 1 + arch/blackfin/mm/init.c | 29 +++++++++++++++++++++++------ 2 files changed, 24 insertions(+), 6 deletions(-) diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 1a942a721d51..462cae893757 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -238,6 +238,7 @@ void __init setup_arch(char **cmdline_p) memory_end = _ramend - DMA_UNCACHED_REGION; _ramstart = (unsigned long)__bss_stop; + _rambase = (unsigned long)_stext; #ifdef CONFIG_MPU /* Round up to multiple of 4MB. */ memory_start = (_ramstart + 0x3fffff) & ~0x3fffff; diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c index 9f007cace6e6..eb1a12ac9e33 100644 --- a/arch/blackfin/mm/init.c +++ b/arch/blackfin/mm/init.c @@ -128,8 +128,8 @@ void __init paging_init(void) void __init mem_init(void) { unsigned int codek = 0, datak = 0, initk = 0; + unsigned int reservedpages = 0, freepages = 0; unsigned long tmp; - unsigned int len = _ramend - _rambase; unsigned long start_mem = memory_start; unsigned long end_mem = memory_end; @@ -138,19 +138,36 @@ void __init mem_init(void) start_mem = PAGE_ALIGN(start_mem); max_mapnr = num_physpages = MAP_NR(high_memory); - printk(KERN_INFO "Physical pages: %lx\n", num_physpages); + printk(KERN_INFO "Kernel managed physical pages: %lu\n", + num_physpages); /* This will put all memory onto the freelists. */ totalram_pages = free_all_bootmem(); + reservedpages = 0; + for (tmp = 0; tmp < max_mapnr; tmp++) + if (PageReserved(pfn_to_page(tmp))) + reservedpages++; + freepages = max_mapnr - reservedpages; + + /* do not count in kernel image between _rambase and _ramstart */ + reservedpages -= (_ramstart - _rambase) >> PAGE_SHIFT; +#if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263) + reservedpages += (_ramend - memory_end - DMA_UNCACHED_REGION) >> + PAGE_SHIFT; +#endif + codek = (_etext - _stext) >> 10; - datak = (__bss_stop - __bss_start) >> 10; initk = (__init_end - __init_begin) >> 10; + datak = ((_ramstart - _rambase) >> 10) - codek - initk; - tmp = nr_free_pages() << PAGE_SHIFT; printk(KERN_INFO - "Memory available: %luk/%uk RAM, (%uk init code, %uk kernel code, %uk data, %uk dma)\n", - tmp >> 10, len >> 10, initk, codek, datak, DMA_UNCACHED_REGION >> 10); + "Memory available: %luk/%luk RAM, " + "(%uk init code, %uk kernel code, " + "%uk data, %uk dma, %uk reserved)\n", + (unsigned long) freepages << (PAGE_SHIFT-10), _ramend >> 10, + initk, codek, datak, DMA_UNCACHED_REGION >> 10, + (reservedpages << (PAGE_SHIFT-10))); /* Initialize the blackfin L1 Memory. */ l1sram_init(); -- cgit v1.2.3-59-g8ed1b From fc97551db9e4e9402ff2b5c94be8267b2e5f32f4 Mon Sep 17 00:00:00 2001 From: Bernd Schmidt Date: Sun, 27 Jan 2008 19:56:43 +0800 Subject: [Blackfin] arch: Add the semtimedop syscall. Upstream uClibc doesn't compile without it. Signed-off-by: Bernd Schmidt Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/entry.S | 1 + include/asm-blackfin/unistd.h | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index c2e81a10c47b..56ff51bc8c21 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -1381,6 +1381,7 @@ ENTRY(_sys_call_table) .long _sys_set_robust_list .long _sys_get_robust_list /* 355 */ .long _sys_fallocate + .long _sys_semtimedop .rept NR_syscalls-(.-_sys_call_table)/4 .long _sys_ni_syscall .endr diff --git a/include/asm-blackfin/unistd.h b/include/asm-blackfin/unistd.h index 07ffe8b718c5..e98167358d26 100644 --- a/include/asm-blackfin/unistd.h +++ b/include/asm-blackfin/unistd.h @@ -369,8 +369,9 @@ #define __NR_set_robust_list 354 #define __NR_get_robust_list 355 #define __NR_fallocate 356 +#define __NR_semtimedop 357 -#define __NR_syscall 357 +#define __NR_syscall 358 #define NR_syscalls __NR_syscall /* Old optional stuff no one actually uses */ -- cgit v1.2.3-59-g8ed1b From 408dbc0da29913f99e56001db892eb653b47c13b Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Sun, 27 Jan 2008 18:38:12 +0800 Subject: [Blackfin] arch: remove old I2C BF54x porting. Signed-off-by: Bryan Wu --- include/asm-blackfin/mach-bf548/cdefBF54x_base.h | 33 ------------------------ 1 file changed, 33 deletions(-) diff --git a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h index aefab3f618c1..19ddcd83c71f 100644 --- a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h +++ b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h @@ -244,39 +244,6 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) #define bfin_read_TWI0_RCV_DATA16() bfin_read16(TWI0_RCV_DATA16) #define bfin_write_TWI0_RCV_DATA16(val) bfin_write16(TWI0_RCV_DATA16, val) -#define bfin_read_TWI_CLKDIV() bfin_read16(TWI0_CLKDIV) -#define bfin_write_TWI_CLKDIV(val) bfin_write16(TWI0_CLKDIV, val) -#define bfin_read_TWI_CONTROL() bfin_read16(TWI0_CONTROL) -#define bfin_write_TWI_CONTROL(val) bfin_write16(TWI0_CONTROL, val) -#define bfin_read_TWI_SLAVE_CTRL() bfin_read16(TWI0_SLAVE_CTRL) -#define bfin_write_TWI_SLAVE_CTRL(val) bfin_write16(TWI0_SLAVE_CTRL, val) -#define bfin_read_TWI_SLAVE_STAT() bfin_read16(TWI0_SLAVE_STAT) -#define bfin_write_TWI_SLAVE_STAT(val) bfin_write16(TWI0_SLAVE_STAT, val) -#define bfin_read_TWI_SLAVE_ADDR() bfin_read16(TWI0_SLAVE_ADDR) -#define bfin_write_TWI_SLAVE_ADDR(val) bfin_write16(TWI0_SLAVE_ADDR, val) -#define bfin_read_TWI_MASTER_CTL() bfin_read16(TWI0_MASTER_CTRL) -#define bfin_write_TWI_MASTER_CTL(val) bfin_write16(TWI0_MASTER_CTRL, val) -#define bfin_read_TWI_MASTER_STAT() bfin_read16(TWI0_MASTER_STAT) -#define bfin_write_TWI_MASTER_STAT(val) bfin_write16(TWI0_MASTER_STAT, val) -#define bfin_read_TWI_MASTER_ADDR() bfin_read16(TWI0_MASTER_ADDR) -#define bfin_write_TWI_MASTER_ADDR(val) bfin_write16(TWI0_MASTER_ADDR, val) -#define bfin_read_TWI_INT_STAT() bfin_read16(TWI0_INT_STAT) -#define bfin_write_TWI_INT_STAT(val) bfin_write16(TWI0_INT_STAT, val) -#define bfin_read_TWI_INT_MASK() bfin_read16(TWI0_INT_MASK) -#define bfin_write_TWI_INT_MASK(val) bfin_write16(TWI0_INT_MASK, val) -#define bfin_read_TWI_FIFO_CTL() bfin_read16(TWI0_FIFO_CTRL) -#define bfin_write_TWI_FIFO_CTL(val) bfin_write16(TWI0_FIFO_CTRL, val) -#define bfin_read_TWI_FIFO_STAT() bfin_read16(TWI0_FIFO_STAT) -#define bfin_write_TWI_FIFO_STAT(val) bfin_write16(TWI0_FIFO_STAT, val) -#define bfin_read_TWI_XMT_DATA8() bfin_read16(TWI0_XMT_DATA8) -#define bfin_write_TWI_XMT_DATA8(val) bfin_write16(TWI0_XMT_DATA8, val) -#define bfin_read_TWI_XMT_DATA16() bfin_read16(TWI0_XMT_DATA16) -#define bfin_write_TWI_XMT_DATA16(val) bfin_write16(TWI0_XMT_DATA16, val) -#define bfin_read_TWI_RCV_DATA8() bfin_read16(TWI0_RCV_DATA8) -#define bfin_write_TWI_RCV_DATA8(val) bfin_write16(TWI0_RCV_DATA8, val) -#define bfin_read_TWI_RCV_DATA16() bfin_read16(TWI0_RCV_DATA16) -#define bfin_write_TWI_RCV_DATA16(val) bfin_write16(TWI0_RCV_DATA16, val) - /* SPORT0 is not defined in the shared file because it is not available on the ADSP-BF542 and ADSP-BF544 bfin_read_()rocessors */ /* SPORT1 Registers */ -- cgit v1.2.3-59-g8ed1b From 9c5e710bc1431f41ccdd0c294fa355aa0d45d2d7 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sat, 17 Nov 2007 23:19:44 +0800 Subject: MAINTIANERS: just use Mike gmail e-mail for contact and pawn the serial driver off onto Sonic Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- MAINTAINERS | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 59db481c77de..29371226f682 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -758,22 +758,20 @@ S: Supported BLACKFIN RTC DRIVER P: Mike Frysinger -M: michael.frysinger@analog.com M: vapier.adi@gmail.com L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) W: http://blackfin.uclinux.org S: Supported BLACKFIN SERIAL DRIVER -P: Aubrey Li -M: aubrey.li@analog.com +P: Sonic Zhang +M: sonic.zhang@analog.com L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) W: http://blackfin.uclinux.org S: Supported BLACKFIN WATCHDOG DRIVER P: Mike Frysinger -M: michael.frysinger@analog.com M: vapier.adi@gmail.com L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) W: http://blackfin.uclinux.org -- cgit v1.2.3-59-g8ed1b From dae5dbdbd786798ad2249e54df1156d524da30aa Mon Sep 17 00:00:00 2001 From: Steve French Date: Sun, 30 Dec 2007 23:49:57 +0000 Subject: [CIFS] fix SetEA failure to some Samba versions Thanks to Oleg Gvozdev for noticing the problem. CC: Andrew Morton Signed-off-by: Steve French --- fs/cifs/CHANGES | 2 +- fs/cifs/cifssmb.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES index a609599287aa..13d788f9e5f0 100644 --- a/fs/cifs/CHANGES +++ b/fs/cifs/CHANGES @@ -3,7 +3,7 @@ Version 1.52 Fix oops on second mount to server when null auth is used. Enable experimental Kerberos support. Return writebehind errors on flush and sync so that events like out of disk space get reported properly on -cached files. +cached files. Fix setxattr failure to certain Samba versions. Version 1.51 ------------ diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 9e8a6bef029a..618542b8ce0b 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -5499,7 +5499,7 @@ SetEARetry: else name_len = strnlen(ea_name, 255); - count = sizeof(*parm_data) + ea_value_len + name_len + 1; + count = sizeof(*parm_data) + ea_value_len + name_len; pSMB->MaxParameterCount = cpu_to_le16(2); pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find max SMB size from sess */ pSMB->MaxSetupCount = 0; -- cgit v1.2.3-59-g8ed1b From 05b3de63da2abe804f5dbe0174298bf48949079f Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Mon, 31 Dec 2007 00:51:45 +0000 Subject: [CIFS] Only dump SPNEGO key if CONFIG_CIFS_DEBUG2 is set The SPNEGO key data is not terribly interesting except in certain debugging situations. Only dump it to the ring buffer if needed. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifs_spnego.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c index 1529d2b12e9c..d543accc10dd 100644 --- a/fs/cifs/cifs_spnego.c +++ b/fs/cifs/cifs_spnego.c @@ -122,11 +122,13 @@ cifs_get_spnego_key(struct cifsSesInfo *sesInfo) cFYI(1, ("key description = %s", description)); spnego_key = request_key(&cifs_spnego_key_type, description, ""); +#ifdef CONFIG_CIFS_DEBUG2 if (cifsFYI && !IS_ERR(spnego_key)) { struct cifs_spnego_msg *msg = spnego_key->payload.data; - cifs_dump_mem("SPNEGO reply blob:", msg->data, - msg->secblob_len + msg->sesskey_len); + cifs_dump_mem("SPNEGO reply blob:", msg->data, min(1024, + msg->secblob_len + msg->sesskey_len)); } +#endif /* CONFIG_CIFS_DEBUG2 */ out: kfree(description); -- cgit v1.2.3-59-g8ed1b From 1d9a8852c365fb7f8db0f8364210138985f457b8 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Mon, 31 Dec 2007 01:37:11 +0000 Subject: [CIFS] redo existing session setup if needed in cifs_mount When cifs_mount finds an existing SMB session that it can use for a new mount, it does not check to see whether that session is in need of being reconnected. An easy way to reproduce: 1) mount //server/share1 2) watch /proc/fs/cifs/DebugData for the share to go DISCONNECTED 3) mount //server/share2 with same creds as in step 1. The second mount will fail because CIFSTCon returned -EAGAIN. If you do an operation in share1 and then reattempt the mount it will work (since the session is reestablished). The following patch fixes this by having cifs_mount check the status of the session when it picks an existing session and calling cifs_setup_session on it again if it's in need of reconnection. Thanks to Wojciech Pilorz for the initial bug report. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/CHANGES | 3 ++- fs/cifs/connect.c | 10 +++++++++- 2 files changed, 11 insertions(+), 2 deletions(-) diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES index 13d788f9e5f0..0c778765bd79 100644 --- a/fs/cifs/CHANGES +++ b/fs/cifs/CHANGES @@ -3,7 +3,8 @@ Version 1.52 Fix oops on second mount to server when null auth is used. Enable experimental Kerberos support. Return writebehind errors on flush and sync so that events like out of disk space get reported properly on -cached files. Fix setxattr failure to certain Samba versions. +cached files. Fix setxattr failure to certain Samba versions. Fix mount +of second share to disconnected server session (autoreconnect on this). Version 1.51 ------------ diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index fd9147cdb5a9..658f58b99e6f 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1964,7 +1964,15 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, if (existingCifsSes) { pSesInfo = existingCifsSes; - cFYI(1, ("Existing smb sess found")); + cFYI(1, ("Existing smb sess found (status=%d)", + pSesInfo->status)); + if (pSesInfo->status == CifsNeedReconnect) { + cFYI(1, ("Session needs reconnect")); + down(&pSesInfo->sesSem); + rc = cifs_setup_session(xid, pSesInfo, + cifs_sb->local_nls); + up(&pSesInfo->sesSem); + } } else if (!rc) { cFYI(1, ("Existing smb sess not found")); pSesInfo = sesInfoAlloc(); -- cgit v1.2.3-59-g8ed1b From 1a67570c76402b36695cd0725e28649ee8fe830d Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Mon, 31 Dec 2007 04:03:02 +0000 Subject: [CIFS] use krb5 session key from first SMB session after a NegProt Currently, any new kerberos SMB session overwrites the server's session key. The session key should only be set by the first SMB session set up on the socket. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/sess.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c index d0cb469daab7..ce698d5f6107 100644 --- a/fs/cifs/sess.c +++ b/fs/cifs/sess.c @@ -528,9 +528,11 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time, rc = -EOVERFLOW; goto ssetup_exit; } - ses->server->mac_signing_key.len = msg->sesskey_len; - memcpy(ses->server->mac_signing_key.data.krb5, msg->data, - msg->sesskey_len); + if (first_time) { + ses->server->mac_signing_key.len = msg->sesskey_len; + memcpy(ses->server->mac_signing_key.data.krb5, + msg->data, msg->sesskey_len); + } pSMB->req.hdr.Flags2 |= SMBFLG2_EXT_SEC; capabilities |= CAP_EXTENDED_SECURITY; pSMB->req.Capabilities = cpu_to_le32(capabilities); -- cgit v1.2.3-59-g8ed1b From bb5a9a04d4cab4b13d63ac5cd3e1fb35f9583607 Mon Sep 17 00:00:00 2001 From: Steve French Date: Mon, 31 Dec 2007 04:21:29 +0000 Subject: [CIFS] cifs_partialpagewrite() cleanup rc cannot be -EBADF now and condition is always true Signed-off-by: Vasily Averin Signed-off-by: Steve French --- fs/cifs/file.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index dd26e2759b17..5f7c374ae89c 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -1179,12 +1179,10 @@ static int cifs_partialpagewrite(struct page *page, unsigned from, unsigned to) atomic_dec(&open_file->wrtPending); /* Does mm or vfs already set times? */ inode->i_atime = inode->i_mtime = current_fs_time(inode->i_sb); - if ((bytes_written > 0) && (offset)) { + if ((bytes_written > 0) && (offset)) rc = 0; - } else if (bytes_written < 0) { - if (rc != -EBADF) - rc = bytes_written; - } + else if (bytes_written < 0) + rc = bytes_written; } else { cFYI(1, ("No writeable filehandles for inode")); rc = -EIO; -- cgit v1.2.3-59-g8ed1b From 28c5a02a11f70bb1fd8dd3b633206e2db3220308 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Mon, 31 Dec 2007 04:56:21 +0000 Subject: [CIFS] fix unicode string alignment in SPNEGO setup Unicode strings need to be word aligned, but the code that handles that is currently not taking the length of the SPNEGO blob into account. Fix it to do so. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/sess.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c index ce698d5f6107..d2153abcba6d 100644 --- a/fs/cifs/sess.c +++ b/fs/cifs/sess.c @@ -542,7 +542,7 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time, if (ses->capabilities & CAP_UNICODE) { /* unicode strings must be word aligned */ - if (iov[0].iov_len % 2) { + if ((iov[0].iov_len + iov[1].iov_len) % 2) { *bcc_ptr = 0; bcc_ptr++; } -- cgit v1.2.3-59-g8ed1b From 97837582bc1e191d2792af74c1f3762ed01243b9 Mon Sep 17 00:00:00 2001 From: Steve French Date: Mon, 31 Dec 2007 07:47:21 +0000 Subject: [CIFS] Allow setting mode via cifs acl Requires cifsacl mount flag to be on and CIFS_EXPERIMENTAL enabled CC: Shirish Pargaonkar Signed-off-by: Steve French --- fs/cifs/CHANGES | 2 + fs/cifs/cifsacl.c | 240 ++++++++++++++++++++++++++++++++++++++++++++++++++-- fs/cifs/cifspdu.h | 3 + fs/cifs/cifsproto.h | 4 +- fs/cifs/cifssmb.c | 65 ++++++++++++++ fs/cifs/inode.c | 14 ++- 6 files changed, 315 insertions(+), 13 deletions(-) diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES index 0c778765bd79..edd248367b36 100644 --- a/fs/cifs/CHANGES +++ b/fs/cifs/CHANGES @@ -5,6 +5,8 @@ Enable experimental Kerberos support. Return writebehind errors on flush and sync so that events like out of disk space get reported properly on cached files. Fix setxattr failure to certain Samba versions. Fix mount of second share to disconnected server session (autoreconnect on this). +Add ability to modify cifs acls for handling chmod (when mounted with +cifsacl flag). Version 1.51 ------------ diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c index c312adcba4fc..a7035bd18e4e 100644 --- a/fs/cifs/cifsacl.c +++ b/fs/cifs/cifsacl.c @@ -129,6 +129,54 @@ int compare_sids(const struct cifs_sid *ctsid, const struct cifs_sid *cwsid) return (1); /* sids compare/match */ } + +/* copy ntsd, owner sid, and group sid from a security descriptor to another */ +static void copy_sec_desc(const struct cifs_ntsd *pntsd, + struct cifs_ntsd *pnntsd, __u32 sidsoffset) +{ + int i; + + struct cifs_sid *owner_sid_ptr, *group_sid_ptr; + struct cifs_sid *nowner_sid_ptr, *ngroup_sid_ptr; + + /* copy security descriptor control portion */ + pnntsd->revision = pntsd->revision; + pnntsd->type = pntsd->type; + pnntsd->dacloffset = cpu_to_le32(sizeof(struct cifs_ntsd)); + pnntsd->sacloffset = 0; + pnntsd->osidoffset = cpu_to_le32(sidsoffset); + pnntsd->gsidoffset = cpu_to_le32(sidsoffset + sizeof(struct cifs_sid)); + + /* copy owner sid */ + owner_sid_ptr = (struct cifs_sid *)((char *)pntsd + + le32_to_cpu(pntsd->osidoffset)); + nowner_sid_ptr = (struct cifs_sid *)((char *)pnntsd + sidsoffset); + + nowner_sid_ptr->revision = owner_sid_ptr->revision; + nowner_sid_ptr->num_subauth = owner_sid_ptr->num_subauth; + for (i = 0; i < 6; i++) + nowner_sid_ptr->authority[i] = owner_sid_ptr->authority[i]; + for (i = 0; i < 5; i++) + nowner_sid_ptr->sub_auth[i] = owner_sid_ptr->sub_auth[i]; + + /* copy group sid */ + group_sid_ptr = (struct cifs_sid *)((char *)pntsd + + le32_to_cpu(pntsd->gsidoffset)); + ngroup_sid_ptr = (struct cifs_sid *)((char *)pnntsd + sidsoffset + + sizeof(struct cifs_sid)); + + ngroup_sid_ptr->revision = group_sid_ptr->revision; + ngroup_sid_ptr->num_subauth = group_sid_ptr->num_subauth; + for (i = 0; i < 6; i++) + ngroup_sid_ptr->authority[i] = group_sid_ptr->authority[i]; + for (i = 0; i < 5; i++) + ngroup_sid_ptr->sub_auth[i] = + cpu_to_le32(group_sid_ptr->sub_auth[i]); + + return; +} + + /* change posix mode to reflect permissions pmode is the existing mode (we only want to overwrite part of this @@ -220,6 +268,33 @@ static void mode_to_access_flags(umode_t mode, umode_t bits_to_use, return; } +static __le16 fill_ace_for_sid(struct cifs_ace *pntace, + const struct cifs_sid *psid, __u64 nmode, umode_t bits) +{ + int i; + __u16 size = 0; + __u32 access_req = 0; + + pntace->type = ACCESS_ALLOWED; + pntace->flags = 0x0; + mode_to_access_flags(nmode, bits, &access_req); + if (!access_req) + access_req = SET_MINIMUM_RIGHTS; + pntace->access_req = cpu_to_le32(access_req); + + pntace->sid.revision = psid->revision; + pntace->sid.num_subauth = psid->num_subauth; + for (i = 0; i < 6; i++) + pntace->sid.authority[i] = psid->authority[i]; + for (i = 0; i < psid->num_subauth; i++) + pntace->sid.sub_auth[i] = psid->sub_auth[i]; + + size = 1 + 1 + 2 + 4 + 1 + 1 + 6 + (psid->num_subauth * 4); + pntace->size = cpu_to_le16(size); + + return (size); +} + #ifdef CONFIG_CIFS_DEBUG2 static void dump_ace(struct cifs_ace *pace, char *end_of_acl) @@ -243,7 +318,7 @@ static void dump_ace(struct cifs_ace *pace, char *end_of_acl) int i; cFYI(1, ("ACE revision %d num_auth %d type %d flags %d size %d", pace->sid.revision, pace->sid.num_subauth, pace->type, - pace->flags, pace->size)); + pace->flags, le16_to_cpu(pace->size))); for (i = 0; i < num_subauth; ++i) { cFYI(1, ("ACE sub_auth[%d]: 0x%x", i, le32_to_cpu(pace->sid.sub_auth[i]))); @@ -346,6 +421,28 @@ static void parse_dacl(struct cifs_acl *pdacl, char *end_of_acl, } +static int set_chmod_dacl(struct cifs_acl *pndacl, struct cifs_sid *pownersid, + struct cifs_sid *pgrpsid, __u64 nmode) +{ + __le16 size = 0; + struct cifs_acl *pnndacl; + + pnndacl = (struct cifs_acl *)((char *)pndacl + sizeof(struct cifs_acl)); + + size += fill_ace_for_sid((struct cifs_ace *) ((char *)pnndacl + size), + pownersid, nmode, S_IRWXU); + size += fill_ace_for_sid((struct cifs_ace *)((char *)pnndacl + size), + pgrpsid, nmode, S_IRWXG); + size += fill_ace_for_sid((struct cifs_ace *)((char *)pnndacl + size), + &sid_everyone, nmode, S_IRWXO); + + pndacl->size = cpu_to_le16(size + sizeof(struct cifs_acl)); + pndacl->num_aces = 3; + + return (0); +} + + static int parse_sid(struct cifs_sid *psid, char *end_of_acl) { /* BB need to add parm so we can store the SID BB */ @@ -432,6 +529,46 @@ static int parse_sec_desc(struct cifs_ntsd *pntsd, int acl_len, } +/* Convert permission bits from mode to equivalent CIFS ACL */ +static int build_sec_desc(struct cifs_ntsd *pntsd, struct cifs_ntsd *pnntsd, + int acl_len, struct inode *inode, __u64 nmode) +{ + int rc = 0; + __u32 dacloffset; + __u32 ndacloffset; + __u32 sidsoffset; + struct cifs_sid *owner_sid_ptr, *group_sid_ptr; + struct cifs_acl *dacl_ptr = NULL; /* no need for SACL ptr */ + struct cifs_acl *ndacl_ptr = NULL; /* no need for SACL ptr */ + + if ((inode == NULL) || (pntsd == NULL) || (pnntsd == NULL)) + return (-EIO); + + owner_sid_ptr = (struct cifs_sid *)((char *)pntsd + + le32_to_cpu(pntsd->osidoffset)); + group_sid_ptr = (struct cifs_sid *)((char *)pntsd + + le32_to_cpu(pntsd->gsidoffset)); + + dacloffset = le32_to_cpu(pntsd->dacloffset); + dacl_ptr = (struct cifs_acl *)((char *)pntsd + dacloffset); + + ndacloffset = sizeof(struct cifs_ntsd); + ndacl_ptr = (struct cifs_acl *)((char *)pnntsd + ndacloffset); + ndacl_ptr->revision = dacl_ptr->revision; + ndacl_ptr->size = 0; + ndacl_ptr->num_aces = 0; + + rc = set_chmod_dacl(ndacl_ptr, owner_sid_ptr, group_sid_ptr, nmode); + + sidsoffset = ndacloffset + le16_to_cpu(ndacl_ptr->size); + + /* copy security descriptor control portion and owner and group sid */ + copy_sec_desc(pntsd, pnntsd, sidsoffset); + + return (rc); +} + + /* Retrieve an ACL from the server */ static struct cifs_ntsd *get_cifs_acl(u32 *pacllen, struct inode *inode, const char *path) @@ -487,6 +624,64 @@ static struct cifs_ntsd *get_cifs_acl(u32 *pacllen, struct inode *inode, return pntsd; } +/* Set an ACL on the server */ +static int set_cifs_acl(struct cifs_ntsd *pnntsd, __u32 acllen, + struct inode *inode, const char *path) +{ + struct cifsFileInfo *open_file; + int unlock_file = FALSE; + int xid; + int rc = -EIO; + __u16 fid; + struct super_block *sb; + struct cifs_sb_info *cifs_sb; + +#ifdef CONFIG_CIFS_DEBUG2 + cFYI(1, ("set ACL for %s from mode 0x%x", path, inode->i_mode)); +#endif + + if (!inode) + return (rc); + + sb = inode->i_sb; + if (sb == NULL) + return (rc); + + cifs_sb = CIFS_SB(sb); + xid = GetXid(); + + open_file = find_readable_file(CIFS_I(inode)); + if (open_file) { + unlock_file = TRUE; + fid = open_file->netfid; + } else { + int oplock = FALSE; + /* open file */ + rc = CIFSSMBOpen(xid, cifs_sb->tcon, path, FILE_OPEN, + WRITE_DAC, 0, &fid, &oplock, NULL, + cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & + CIFS_MOUNT_MAP_SPECIAL_CHR); + if (rc != 0) { + cERROR(1, ("Unable to open file to set ACL")); + FreeXid(xid); + return (rc); + } + } + + rc = CIFSSMBSetCIFSACL(xid, cifs_sb->tcon, fid, pnntsd, acllen); +#ifdef CONFIG_CIFS_DEBUG2 + cFYI(1, ("SetCIFSACL rc = %d", rc)); +#endif + if (unlock_file == TRUE) + atomic_dec(&open_file->wrtPending); + else + CIFSSMBClose(xid, cifs_sb->tcon, fid); + + FreeXid(xid); + + return (rc); +} + /* Translate the CIFS ACL (simlar to NTFS ACL) for a file into mode bits */ void acl_to_uid_mode(struct inode *inode, const char *path) { @@ -510,24 +705,53 @@ void acl_to_uid_mode(struct inode *inode, const char *path) } /* Convert mode bits to an ACL so we can update the ACL on the server */ -int mode_to_acl(struct inode *inode, const char *path) +int mode_to_acl(struct inode *inode, const char *path, __u64 nmode) { int rc = 0; __u32 acllen = 0; - struct cifs_ntsd *pntsd = NULL; + struct cifs_ntsd *pntsd = NULL; /* acl obtained from server */ + struct cifs_ntsd *pnntsd = NULL; /* modified acl to be sent to server */ +#ifdef CONFIG_CIFS_DEBUG2 cFYI(1, ("set ACL from mode for %s", path)); +#endif /* Get the security descriptor */ pntsd = get_cifs_acl(&acllen, inode, path); - /* Add/Modify the three ACEs for owner, group, everyone - while retaining the other ACEs */ + /* Add three ACEs for owner, group, everyone getting rid of + other ACEs as chmod disables ACEs and set the security descriptor */ - /* Set the security descriptor */ + if (pntsd) { + /* allocate memory for the smb header, + set security descriptor request security descriptor + parameters, and secuirty descriptor itself */ + pnntsd = kmalloc(acllen, GFP_KERNEL); + if (!pnntsd) { + cERROR(1, ("Unable to allocate security descriptor")); + kfree(pntsd); + return (-ENOMEM); + } - kfree(pntsd); - return rc; + rc = build_sec_desc(pntsd, pnntsd, acllen, inode, nmode); + +#ifdef CONFIG_CIFS_DEBUG2 + cFYI(1, ("build_sec_desc rc: %d", rc)); +#endif + + if (!rc) { + /* Set the security descriptor */ + rc = set_cifs_acl(pnntsd, acllen, inode, path); +#ifdef CONFIG_CIFS_DEBUG2 + cFYI(1, ("set_cifs_acl rc: %d", rc)); +#endif + } + + kfree(pnntsd); + kfree(pntsd); + } + + return (rc); } #endif /* CONFIG_CIFS_EXPERIMENTAL */ diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h index dbe6b846f37f..47f79504f57b 100644 --- a/fs/cifs/cifspdu.h +++ b/fs/cifs/cifspdu.h @@ -237,6 +237,9 @@ | DELETE | READ_CONTROL | WRITE_DAC \ | WRITE_OWNER | SYNCHRONIZE) +#define SET_MINIMUM_RIGHTS (FILE_READ_EA | FILE_READ_ATTRIBUTES \ + | READ_CONTROL | SYNCHRONIZE) + /* * Invalid readdir handle diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 8350eec49663..7093cb4b0212 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -97,7 +97,7 @@ extern int cifs_get_inode_info_unix(struct inode **pinode, const unsigned char *search_path, struct super_block *sb, int xid); extern void acl_to_uid_mode(struct inode *inode, const char *search_path); -extern int mode_to_acl(struct inode *inode, const char *path); +extern int mode_to_acl(struct inode *inode, const char *path, __u64); extern int cifs_mount(struct super_block *, struct cifs_sb_info *, char *, const char *); @@ -342,6 +342,8 @@ extern int CIFSSMBSetEA(const int xid, struct cifsTconInfo *tcon, const struct nls_table *nls_codepage, int remap_special_chars); extern int CIFSSMBGetCIFSACL(const int xid, struct cifsTconInfo *tcon, __u16 fid, struct cifs_ntsd **acl_inf, __u32 *buflen); +extern int CIFSSMBSetCIFSACL(const int, struct cifsTconInfo *, __u16, + struct cifs_ntsd *, __u32); extern int CIFSSMBGetPosixACL(const int xid, struct cifsTconInfo *tcon, const unsigned char *searchName, char *acl_inf, const int buflen, const int acl_type, diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 618542b8ce0b..9409524e4bf8 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -3156,6 +3156,71 @@ qsec_out: /* cifs_small_buf_release(pSMB); */ /* Freed earlier now in SendReceive2 */ return rc; } + +int +CIFSSMBSetCIFSACL(const int xid, struct cifsTconInfo *tcon, __u16 fid, + struct cifs_ntsd *pntsd, __u32 acllen) +{ + __u16 byte_count, param_count, data_count, param_offset, data_offset; + int rc = 0; + int bytes_returned = 0; + SET_SEC_DESC_REQ *pSMB = NULL; + NTRANSACT_RSP *pSMBr = NULL; + +setCifsAclRetry: + rc = smb_init(SMB_COM_NT_TRANSACT, 19, tcon, (void **) &pSMB, + (void **) &pSMBr); + if (rc) + return (rc); + + pSMB->MaxSetupCount = 0; + pSMB->Reserved = 0; + + param_count = 8; + param_offset = offsetof(struct smb_com_transaction_ssec_req, Fid) - 4; + data_count = acllen; + data_offset = param_offset + param_count; + byte_count = 3 /* pad */ + param_count; + + pSMB->DataCount = cpu_to_le32(data_count); + pSMB->TotalDataCount = pSMB->DataCount; + pSMB->MaxParameterCount = cpu_to_le32(4); + pSMB->MaxDataCount = cpu_to_le32(16384); + pSMB->ParameterCount = cpu_to_le32(param_count); + pSMB->ParameterOffset = cpu_to_le32(param_offset); + pSMB->TotalParameterCount = pSMB->ParameterCount; + pSMB->DataOffset = cpu_to_le32(data_offset); + pSMB->SetupCount = 0; + pSMB->SubCommand = cpu_to_le16(NT_TRANSACT_SET_SECURITY_DESC); + pSMB->ByteCount = cpu_to_le16(byte_count+data_count); + + pSMB->Fid = fid; /* file handle always le */ + pSMB->Reserved2 = 0; + pSMB->AclFlags = cpu_to_le32(CIFS_ACL_DACL); + + if (pntsd && acllen) { + memcpy((char *) &pSMBr->hdr.Protocol + data_offset, + (char *) pntsd, + acllen); + pSMB->hdr.smb_buf_length += (byte_count + data_count); + + } else + pSMB->hdr.smb_buf_length += byte_count; + + rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB, + (struct smb_hdr *) pSMBr, &bytes_returned, 0); + + cFYI(1, ("SetCIFSACL bytes_returned: %d, rc: %d", bytes_returned, rc)); + if (rc) + cFYI(1, ("Set CIFS ACL returned %d", rc)); + cifs_buf_release(pSMB); + + if (rc == -EAGAIN) + goto setCifsAclRetry; + + return (rc); +} + #endif /* CONFIG_CIFS_EXPERIMENTAL */ /* Legacy Query Path Information call for lookup to old servers such diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index e915eb1d2e66..fdc0fe109d7b 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1607,7 +1607,13 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) CIFS_MOUNT_MAP_SPECIAL_CHR); else if (attrs->ia_valid & ATTR_MODE) { rc = 0; +#ifdef CONFIG_CIFS_EXPERIMENTAL + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) + rc = mode_to_acl(direntry->d_inode, full_path, mode); + else if ((mode & S_IWUGO) == 0) /* not writeable */ { +#else if ((mode & S_IWUGO) == 0) /* not writeable */ { +#endif if ((cifsInode->cifsAttrs & ATTR_READONLY) == 0) { set_dosattr = TRUE; time_buf.Attributes = @@ -1626,10 +1632,10 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) if (time_buf.Attributes == 0) time_buf.Attributes |= cpu_to_le32(ATTR_NORMAL); } - /* BB to be implemented - - via Windows security descriptors or streams */ - /* CIFSSMBWinSetPerms(xid, pTcon, full_path, mode, uid, gid, - cifs_sb->local_nls); */ +#ifdef CONFIG_CIFS_EXPERIMENTAL + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) + mode_to_acl(direntry->d_inode, full_path, mode); +#endif } if (attrs->ia_valid & ATTR_ATIME) { -- cgit v1.2.3-59-g8ed1b From 88e7d705c4bdb729f02173583628ccbf49dba945 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 3 Jan 2008 17:37:09 +0000 Subject: [CIFS] hold ses sem on tcp session reconnect during mount Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/connect.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 658f58b99e6f..db3746c891b5 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1966,13 +1966,13 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, pSesInfo = existingCifsSes; cFYI(1, ("Existing smb sess found (status=%d)", pSesInfo->status)); + down(&pSesInfo->sesSem); if (pSesInfo->status == CifsNeedReconnect) { cFYI(1, ("Session needs reconnect")); - down(&pSesInfo->sesSem); rc = cifs_setup_session(xid, pSesInfo, cifs_sb->local_nls); - up(&pSesInfo->sesSem); } + up(&pSesInfo->sesSem); } else if (!rc) { cFYI(1, ("Existing smb sess not found")); pSesInfo = sesInfoAlloc(); @@ -3522,7 +3522,7 @@ cifs_umount(struct super_block *sb, struct cifs_sb_info *cifs_sb) sesInfoFree(ses); FreeXid(xid); - return rc; /* BB check if we should always return zero here */ + return rc; } int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo, -- cgit v1.2.3-59-g8ed1b From 29a424f28390752a4ca2349633aaacc6be494db5 Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Thu, 3 Jan 2008 13:09:33 -0600 Subject: JFS: clear PAGECACHE_TAG_DIRTY for no-write pages When JFS decides to drop a dirty metapage, it simply clears the META_dirty bit and leave alone the PG_dirty and PAGECACHE_TAG_DIRTY bits. When such no-write page goes to metapage_writepage(), the `relic' PAGECACHE_TAG_DIRTY tag should be cleared, to prevent pdflush from repeatedly trying to sync them. This is done through set_page_writeback(), so call it should be called in all cases. If no I/O is initiated, end_page_writeback() should be called immediately. This is how __block_write_full_page() does things. Signed-off-by: Dave Kleikamp CC: Fengguang Wu --- fs/jfs/jfs_metapage.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/fs/jfs/jfs_metapage.c b/fs/jfs/jfs_metapage.c index f5cd8d38af7a..b27fa117f229 100644 --- a/fs/jfs/jfs_metapage.c +++ b/fs/jfs/jfs_metapage.c @@ -360,6 +360,7 @@ static int metapage_writepage(struct page *page, struct writeback_control *wbc) struct metapage *mp; int redirty = 0; sector_t lblock; + int nr_underway = 0; sector_t pblock; sector_t next_block = 0; sector_t page_start; @@ -371,6 +372,7 @@ static int metapage_writepage(struct page *page, struct writeback_control *wbc) (PAGE_CACHE_SHIFT - inode->i_blkbits); BUG_ON(!PageLocked(page)); BUG_ON(PageWriteback(page)); + set_page_writeback(page); for (offset = 0; offset < PAGE_CACHE_SIZE; offset += PSIZE) { mp = page_to_mp(page, offset); @@ -413,11 +415,10 @@ static int metapage_writepage(struct page *page, struct writeback_control *wbc) if (!bio->bi_size) goto dump_bio; submit_bio(WRITE, bio); + nr_underway++; bio = NULL; - } else { - set_page_writeback(page); + } else inc_io(page); - } xlen = (PAGE_CACHE_SIZE - offset) >> inode->i_blkbits; pblock = metapage_get_blocks(inode, lblock, &xlen); if (!pblock) { @@ -449,12 +450,16 @@ static int metapage_writepage(struct page *page, struct writeback_control *wbc) goto dump_bio; submit_bio(WRITE, bio); + nr_underway++; } if (redirty) redirty_page_for_writepage(wbc, page); unlock_page(page); + if (nr_underway == 0) + end_page_writeback(page); + return 0; add_failed: /* We should never reach here, since we're only adding one vec */ -- cgit v1.2.3-59-g8ed1b From 67e6682f18b3bf812a994ae027ff87174a297ae8 Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Wed, 10 Oct 2007 11:11:24 -0500 Subject: JFS: Make sure special inode data is written after journal is flushed This patch makes sure that data that we tried to flush before the journal was completely written actually gets pushed to disk. To avoid duplicating code, moved common code to write_special_inodes(). Signed-off-by: Dave Kleikamp --- fs/jfs/jfs_logmgr.c | 32 +++++++++++++++----------------- fs/jfs/jfs_umount.c | 4 ++-- 2 files changed, 17 insertions(+), 19 deletions(-) diff --git a/fs/jfs/jfs_logmgr.c b/fs/jfs/jfs_logmgr.c index 15a3974cdeeb..2370716d57ad 100644 --- a/fs/jfs/jfs_logmgr.c +++ b/fs/jfs/jfs_logmgr.c @@ -208,6 +208,17 @@ static struct lmStat { } lmStat; #endif +static void write_special_inodes(struct jfs_log *log, + int (*writer)(struct address_space *)) +{ + struct jfs_sb_info *sbi; + + list_for_each_entry(sbi, &log->sb_list, log_list) { + writer(sbi->ipbmap->i_mapping); + writer(sbi->ipimap->i_mapping); + writer(sbi->direct_inode->i_mapping); + } +} /* * NAME: lmLog() @@ -935,22 +946,13 @@ static int lmLogSync(struct jfs_log * log, int hard_sync) struct lrd lrd; int lsn; struct logsyncblk *lp; - struct jfs_sb_info *sbi; unsigned long flags; /* push dirty metapages out to disk */ if (hard_sync) - list_for_each_entry(sbi, &log->sb_list, log_list) { - filemap_fdatawrite(sbi->ipbmap->i_mapping); - filemap_fdatawrite(sbi->ipimap->i_mapping); - filemap_fdatawrite(sbi->direct_inode->i_mapping); - } + write_special_inodes(log, filemap_fdatawrite); else - list_for_each_entry(sbi, &log->sb_list, log_list) { - filemap_flush(sbi->ipbmap->i_mapping); - filemap_flush(sbi->ipimap->i_mapping); - filemap_flush(sbi->direct_inode->i_mapping); - } + write_special_inodes(log, filemap_flush); /* * forward syncpt @@ -1536,7 +1538,6 @@ void jfs_flush_journal(struct jfs_log *log, int wait) { int i; struct tblock *target = NULL; - struct jfs_sb_info *sbi; /* jfs_write_inode may call us during read-only mount */ if (!log) @@ -1598,11 +1599,7 @@ void jfs_flush_journal(struct jfs_log *log, int wait) if (wait < 2) return; - list_for_each_entry(sbi, &log->sb_list, log_list) { - filemap_fdatawrite(sbi->ipbmap->i_mapping); - filemap_fdatawrite(sbi->ipimap->i_mapping); - filemap_fdatawrite(sbi->direct_inode->i_mapping); - } + write_special_inodes(log, filemap_fdatawrite); /* * If there was recent activity, we may need to wait @@ -1611,6 +1608,7 @@ void jfs_flush_journal(struct jfs_log *log, int wait) if ((!list_empty(&log->cqueue)) || !list_empty(&log->synclist)) { for (i = 0; i < 200; i++) { /* Too much? */ msleep(250); + write_special_inodes(log, filemap_fdatawrite); if (list_empty(&log->cqueue) && list_empty(&log->synclist)) break; diff --git a/fs/jfs/jfs_umount.c b/fs/jfs/jfs_umount.c index 7971f37534a3..adcf92d3b603 100644 --- a/fs/jfs/jfs_umount.c +++ b/fs/jfs/jfs_umount.c @@ -68,7 +68,7 @@ int jfs_umount(struct super_block *sb) /* * Wait for outstanding transactions to be written to log: */ - jfs_flush_journal(log, 2); + jfs_flush_journal(log, 1); /* * close fileset inode allocation map (aka fileset inode) @@ -146,7 +146,7 @@ int jfs_umount_rw(struct super_block *sb) * * remove file system from log active file system list. */ - jfs_flush_journal(log, 2); + jfs_flush_journal(log, 1); /* * Make sure all metadata makes it to disk -- cgit v1.2.3-59-g8ed1b From 54af6233d1cb84cdfaa6ea44ea0db0bcf518baac Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Mon, 26 Nov 2007 14:58:10 -0600 Subject: JFS is missing a memory barrier JFS is missing a memory barrier needed to close the critical section before clearing the lock bit. Use lock bitops for this. unlock_page() has a second barrier after clearing the lock, which is required because it checks whether the waitqueue is active without locks. Such a barrier is not required here because the waitqueue spinlock is always taken (something to think about if performance is an issue). Signed-off-by: Nick Piggin Signed-off-by: Dave Kleikamp --- fs/jfs/jfs_metapage.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/jfs/jfs_metapage.c b/fs/jfs/jfs_metapage.c index b27fa117f229..1dfaae5adf1b 100644 --- a/fs/jfs/jfs_metapage.c +++ b/fs/jfs/jfs_metapage.c @@ -39,11 +39,11 @@ static struct { #endif #define metapage_locked(mp) test_bit(META_locked, &(mp)->flag) -#define trylock_metapage(mp) test_and_set_bit(META_locked, &(mp)->flag) +#define trylock_metapage(mp) test_and_set_bit_lock(META_locked, &(mp)->flag) static inline void unlock_metapage(struct metapage *mp) { - clear_bit(META_locked, &mp->flag); + clear_bit_unlock(META_locked, &mp->flag); wake_up(&mp->wait); } -- cgit v1.2.3-59-g8ed1b From 1eb3a711d6a1c8a4697a2e89d09048353b8aefd3 Mon Sep 17 00:00:00 2001 From: Jack Stone Date: Tue, 31 Jul 2007 09:36:53 -0500 Subject: Remove unnecessary kmalloc casts in the jfs filesystem Signed-off-by: Jack Stone Signed-off-by: Dave Kleikamp --- fs/jfs/jfs_dtree.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/fs/jfs/jfs_dtree.c b/fs/jfs/jfs_dtree.c index df25ecc418af..97c66f913393 100644 --- a/fs/jfs/jfs_dtree.c +++ b/fs/jfs/jfs_dtree.c @@ -592,9 +592,7 @@ int dtSearch(struct inode *ip, struct component_name * key, ino_t * data, struct component_name ciKey; struct super_block *sb = ip->i_sb; - ciKey.name = - (wchar_t *) kmalloc((JFS_NAME_MAX + 1) * sizeof(wchar_t), - GFP_NOFS); + ciKey.name = kmalloc((JFS_NAME_MAX + 1) * sizeof(wchar_t), GFP_NOFS); if (ciKey.name == 0) { rc = -ENOMEM; goto dtSearch_Exit2; @@ -957,9 +955,7 @@ static int dtSplitUp(tid_t tid, smp = split->mp; sp = DT_PAGE(ip, smp); - key.name = - (wchar_t *) kmalloc((JFS_NAME_MAX + 2) * sizeof(wchar_t), - GFP_NOFS); + key.name = kmalloc((JFS_NAME_MAX + 2) * sizeof(wchar_t), GFP_NOFS); if (key.name == 0) { DT_PUTPAGE(smp); rc = -ENOMEM; -- cgit v1.2.3-59-g8ed1b From a7fe0ba7eee4f7c53077ff2bed2b581db17d00df Mon Sep 17 00:00:00 2001 From: Shaun Zinck Date: Fri, 31 Aug 2007 12:57:28 -0500 Subject: JFS: use DIV_ROUND_UP where appropriate This replaces some macros and code, which do the same thing as DIV_ROUND_UP defined in kernel.h, to use the DIV_ROUND_UP macro. Signed-off-by: Shaun Zinck Signed-off-by: Dave Kleikamp --- fs/jfs/jfs_dtree.h | 4 ++-- fs/jfs/resize.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/jfs/jfs_dtree.h b/fs/jfs/jfs_dtree.h index 8561c6ecece0..cdac2d5bafeb 100644 --- a/fs/jfs/jfs_dtree.h +++ b/fs/jfs/jfs_dtree.h @@ -74,7 +74,7 @@ struct idtentry { #define DTIHDRDATALEN 11 /* compute number of slots for entry */ -#define NDTINTERNAL(klen) ( ((4 + (klen)) + (15 - 1)) / 15 ) +#define NDTINTERNAL(klen) (DIV_ROUND_UP((4 + (klen)), 15)) /* @@ -133,7 +133,7 @@ struct dir_table_slot { ( ((s64)((dts)->addr1)) << 32 | __le32_to_cpu((dts)->addr2) ) /* compute number of slots for entry */ -#define NDTLEAF_LEGACY(klen) ( ((2 + (klen)) + (15 - 1)) / 15 ) +#define NDTLEAF_LEGACY(klen) (DIV_ROUND_UP((2 + (klen)), 15)) #define NDTLEAF NDTINTERNAL diff --git a/fs/jfs/resize.c b/fs/jfs/resize.c index 71984ee95346..7f24a0bb08ca 100644 --- a/fs/jfs/resize.c +++ b/fs/jfs/resize.c @@ -172,7 +172,7 @@ int jfs_extendfs(struct super_block *sb, s64 newLVSize, int newLogSize) */ t64 = ((newLVSize - newLogSize + BPERDMAP - 1) >> L2BPERDMAP) << L2BPERDMAP; - t32 = ((t64 + (BITSPERPAGE - 1)) / BITSPERPAGE) + 1 + 50; + t32 = DIV_ROUND_UP(t64, BITSPERPAGE) + 1 + 50; newFSCKSize = t32 << sbi->l2nbperpage; newFSCKAddress = newLogAddress - newFSCKSize; -- cgit v1.2.3-59-g8ed1b From 09aaa749f637b19c308464c2b65a001e67c2a16c Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 13 Nov 2007 22:16:08 -0600 Subject: JFS: Remove defconfig ptr comparison to 0 Remove sparse warning: Using plain integer as NULL pointer Signed-off-by: Joe Perches Signed-off-by: Dave Kleikamp --- fs/jfs/jfs_dtree.c | 19 ++++++++++--------- fs/jfs/jfs_imap.c | 4 ++-- fs/jfs/jfs_logmgr.c | 2 +- fs/jfs/jfs_mount.c | 2 +- fs/jfs/namei.c | 2 +- 5 files changed, 15 insertions(+), 14 deletions(-) diff --git a/fs/jfs/jfs_dtree.c b/fs/jfs/jfs_dtree.c index 97c66f913393..4dcc05819998 100644 --- a/fs/jfs/jfs_dtree.c +++ b/fs/jfs/jfs_dtree.c @@ -284,11 +284,11 @@ static struct dir_table_slot *find_index(struct inode *ip, u32 index, release_metapage(*mp); *mp = NULL; } - if (*mp == 0) { + if (!(*mp)) { *lblock = blkno; *mp = read_index_page(ip, blkno); } - if (*mp == 0) { + if (!(*mp)) { jfs_err("free_index: error reading directory table"); return NULL; } @@ -413,7 +413,8 @@ static u32 add_index(tid_t tid, struct inode *ip, s64 bn, int slot) } ip->i_size = PSIZE; - if ((mp = get_index_page(ip, 0)) == 0) { + mp = get_index_page(ip, 0); + if (!mp) { jfs_err("add_index: get_metapage failed!"); xtTruncate(tid, ip, 0, COMMIT_PWMAP); memcpy(&jfs_ip->i_dirtable, temp_table, @@ -461,7 +462,7 @@ static u32 add_index(tid_t tid, struct inode *ip, s64 bn, int slot) } else mp = read_index_page(ip, blkno); - if (mp == 0) { + if (!mp) { jfs_err("add_index: get/read_metapage failed!"); goto clean_up; } @@ -499,7 +500,7 @@ static void free_index(tid_t tid, struct inode *ip, u32 index, u32 next) dirtab_slot = find_index(ip, index, &mp, &lblock); - if (dirtab_slot == 0) + if (!dirtab_slot) return; dirtab_slot->flag = DIR_INDEX_FREE; @@ -526,7 +527,7 @@ static void modify_index(tid_t tid, struct inode *ip, u32 index, s64 bn, dirtab_slot = find_index(ip, index, mp, lblock); - if (dirtab_slot == 0) + if (!dirtab_slot) return; DTSaddress(dirtab_slot, bn); @@ -552,7 +553,7 @@ static int read_index(struct inode *ip, u32 index, struct dir_table_slot *slot; slot = find_index(ip, index, &mp, &lblock); - if (slot == 0) { + if (!slot) { return -EIO; } @@ -593,7 +594,7 @@ int dtSearch(struct inode *ip, struct component_name * key, ino_t * data, struct super_block *sb = ip->i_sb; ciKey.name = kmalloc((JFS_NAME_MAX + 1) * sizeof(wchar_t), GFP_NOFS); - if (ciKey.name == 0) { + if (!ciKey.name) { rc = -ENOMEM; goto dtSearch_Exit2; } @@ -956,7 +957,7 @@ static int dtSplitUp(tid_t tid, sp = DT_PAGE(ip, smp); key.name = kmalloc((JFS_NAME_MAX + 2) * sizeof(wchar_t), GFP_NOFS); - if (key.name == 0) { + if (!key.name) { DT_PUTPAGE(smp); rc = -ENOMEM; goto dtSplitUp_Exit; diff --git a/fs/jfs/jfs_imap.c b/fs/jfs/jfs_imap.c index 3870ba8b9086..9bf29f771737 100644 --- a/fs/jfs/jfs_imap.c +++ b/fs/jfs/jfs_imap.c @@ -381,7 +381,7 @@ int diRead(struct inode *ip) /* read the page of disk inode */ mp = read_metapage(ipimap, pageno << sbi->l2nbperpage, PSIZE, 1); - if (mp == 0) { + if (!mp) { jfs_err("diRead: read_metapage failed"); return -EIO; } @@ -654,7 +654,7 @@ int diWrite(tid_t tid, struct inode *ip) /* read the page of disk inode */ retry: mp = read_metapage(ipimap, pageno << sbi->l2nbperpage, PSIZE, 1); - if (mp == 0) + if (!mp) return -EIO; /* get the pointer to the disk inode */ diff --git a/fs/jfs/jfs_logmgr.c b/fs/jfs/jfs_logmgr.c index 2370716d57ad..325a9679b95a 100644 --- a/fs/jfs/jfs_logmgr.c +++ b/fs/jfs/jfs_logmgr.c @@ -2345,7 +2345,7 @@ int jfsIOWait(void *arg) do { spin_lock_irq(&log_redrive_lock); - while ((bp = log_redrive_list) != 0) { + while ((bp = log_redrive_list)) { log_redrive_list = bp->l_redrive_next; bp->l_redrive_next = NULL; spin_unlock_irq(&log_redrive_lock); diff --git a/fs/jfs/jfs_mount.c b/fs/jfs/jfs_mount.c index 644429acb8c0..7b698f2ec45a 100644 --- a/fs/jfs/jfs_mount.c +++ b/fs/jfs/jfs_mount.c @@ -147,7 +147,7 @@ int jfs_mount(struct super_block *sb) */ if ((sbi->mntflag & JFS_BAD_SAIT) == 0) { ipaimap2 = diReadSpecial(sb, AGGREGATE_I, 1); - if (ipaimap2 == 0) { + if (!ipaimap2) { jfs_err("jfs_mount: Faild to read AGGREGATE_I"); rc = -EIO; goto errout35; diff --git a/fs/jfs/namei.c b/fs/jfs/namei.c index 4e0a8493cef6..d6e5ebad739a 100644 --- a/fs/jfs/namei.c +++ b/fs/jfs/namei.c @@ -1103,7 +1103,7 @@ static int jfs_rename(struct inode *old_dir, struct dentry *old_dentry, * Make sure dest inode number (if any) is what we think it is */ rc = dtSearch(new_dir, &new_dname, &ino, &btstack, JFS_LOOKUP); - if (rc == 0) { + if (!rc) { if ((new_ip == 0) || (ino != new_ip->i_ino)) { rc = -ESTALE; goto out3; -- cgit v1.2.3-59-g8ed1b From da8a41d19233c2bdcc59447aedc808fcdaabf5b7 Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Tue, 13 Nov 2007 22:25:41 -0600 Subject: JFS: FIx one more plain integer as NULL pointer warning Signed-off-by: Dave Kleikamp --- fs/jfs/namei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/jfs/namei.c b/fs/jfs/namei.c index d6e5ebad739a..f8718de3505e 100644 --- a/fs/jfs/namei.c +++ b/fs/jfs/namei.c @@ -1104,7 +1104,7 @@ static int jfs_rename(struct inode *old_dir, struct dentry *old_dentry, */ rc = dtSearch(new_dir, &new_dname, &ino, &btstack, JFS_LOOKUP); if (!rc) { - if ((new_ip == 0) || (ino != new_ip->i_ino)) { + if ((!new_ip) || (ino != new_ip->i_ino)) { rc = -ESTALE; goto out3; } -- cgit v1.2.3-59-g8ed1b From f6d09982197c4163c70f6af0cf15bb78674105c0 Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 8 Jan 2008 23:18:22 +0000 Subject: [CIFS] fix checkpatch warnings in fs/cifs/inode.c Signed-off-by: Steve French --- fs/cifs/README | 28 +++++++++++++++++----------- fs/cifs/TODO | 14 ++++++-------- fs/cifs/inode.c | 14 ++++++++------ 3 files changed, 31 insertions(+), 25 deletions(-) diff --git a/fs/cifs/README b/fs/cifs/README index bf11329ac784..c623e2f9c5db 100644 --- a/fs/cifs/README +++ b/fs/cifs/README @@ -56,7 +56,8 @@ the CIFS VFS web site) copy it to the same directory in which mount.smbfs and similar files reside (usually /sbin). Although the helper software is not required, mount.cifs is recommended. Eventually the Samba 3.0 utility program "net" may also be helpful since it may someday provide easier mount syntax for -users who are used to Windows e.g. net use +users who are used to Windows e.g. + net use Note that running the Winbind pam/nss module (logon service) on all of your Linux clients is useful in mapping Uids and Gids consistently across the domain to the proper network user. The mount.cifs mount helper can be @@ -248,7 +249,7 @@ A partial list of the supported mount options follows: the CIFS session. password The user password. If the mount helper is installed, the user will be prompted for password - if it is not supplied. + if not supplied. ip The ip address of the target server unc The target server Universal Network Name (export) to mount. @@ -283,7 +284,7 @@ A partial list of the supported mount options follows: can be enabled by specifying file_mode and dir_mode on the client. Note that the mount.cifs helper must be at version 1.10 or higher to support specifying the uid - (or gid) in non-numberic form. + (or gid) in non-numeric form. gid Set the default gid for inodes (similar to above). file_mode If CIFS Unix extensions are not supported by the server this overrides the default mode for file inodes. @@ -417,9 +418,10 @@ A partial list of the supported mount options follows: acl Allow setfacl and getfacl to manage posix ACLs if server supports them. (default) noacl Do not allow setfacl and getfacl calls on this mount - user_xattr Allow getting and setting user xattrs as OS/2 EAs (extended - attributes) to the server (default) e.g. via setfattr - and getfattr utilities. + user_xattr Allow getting and setting user xattrs (those attributes whose + name begins with "user." or "os2.") as OS/2 EAs (extended + attributes) to the server. This allows support of the + setfattr and getfattr utilities. (default) nouser_xattr Do not allow getfattr/setfattr to get/set/list xattrs mapchars Translate six of the seven reserved characters (not backslash) *?<>|: @@ -434,6 +436,7 @@ A partial list of the supported mount options follows: nomapchars Do not translate any of these seven characters (default). nocase Request case insensitive path name matching (case sensitive is the default if the server suports it). + (mount option "ignorecase" is identical to "nocase") posixpaths If CIFS Unix extensions are supported, attempt to negotiate posix path name support which allows certain characters forbidden in typical CIFS filenames, without @@ -485,6 +488,9 @@ A partial list of the supported mount options follows: ntlmv2i Use NTLMv2 password hashing with packet signing lanman (if configured in kernel config) use older lanman hash +hard Retry file operations if server is not responding +soft Limit retries to unresponsive servers (usually only + one retry) before returning an error. (default) The mount.cifs mount helper also accepts a few mount options before -o including: @@ -535,8 +541,8 @@ SecurityFlags Flags which control security negotiation and must use NTLM 0x02002 may use NTLMv2 0x00004 must use NTLMv2 0x04004 - may use Kerberos security (not implemented yet) 0x00008 - must use Kerberos (not implemented yet) 0x08008 + may use Kerberos security 0x00008 + must use Kerberos 0x08008 may use lanman (weak) password hash 0x00010 must use lanman password hash 0x10010 may use plaintext passwords 0x00020 @@ -626,6 +632,6 @@ returned success. Also note that "cat /proc/fs/cifs/DebugData" will display information about the active sessions and the shares that are mounted. -Enabling Kerberos (extended security) works when CONFIG_CIFS_EXPERIMENTAL is enabled -but requires a user space helper (from the Samba project). NTLM and NTLMv2 and -LANMAN support do not require this helpr. +Enabling Kerberos (extended security) works when CONFIG_CIFS_EXPERIMENTAL is +on but requires a user space helper (from the Samba project). NTLM and NTLMv2 and +LANMAN support do not require this helper. diff --git a/fs/cifs/TODO b/fs/cifs/TODO index a8852c200728..92c9feac440f 100644 --- a/fs/cifs/TODO +++ b/fs/cifs/TODO @@ -1,4 +1,4 @@ -Version 1.49 April 26, 2007 +Version 1.52 January 3, 2008 A Partial List of Missing Features ================================== @@ -16,16 +16,14 @@ SecurityDescriptors c) Better pam/winbind integration (e.g. to handle uid mapping better) -d) Verify that Kerberos signing works - -e) Cleanup now unneeded SessSetup code in +d) Cleanup now unneeded SessSetup code in fs/cifs/connect.c and add back in NTLMSSP code if any servers need it -f) MD5-HMAC signing SMB PDUs when SPNEGO style SessionSetup -used (Kerberos or NTLMSSP). Signing alreadyimplemented for NTLM -and raw NTLMSSP already. This is important when enabling -extended security and mounting to Windows 2003 Servers +e) ms-dfs and ms-dfs host name resolution cleanup + +f) fix NTLMv2 signing when two mounts with different users to same +server. g) Directory entry caching relies on a 1 second timer, rather than using FindNotify or equivalent. - (started) diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index fdc0fe109d7b..d9567ba2960b 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -54,9 +54,9 @@ int cifs_get_inode_info_unix(struct inode **pinode, MAX_TREE_SIZE + 1) + strnlen(search_path, MAX_PATHCONF) + 1, GFP_KERNEL); - if (tmp_path == NULL) { + if (tmp_path == NULL) return -ENOMEM; - } + /* have to skip first of the double backslash of UNC name */ strncpy(tmp_path, pTcon->treeName, MAX_TREE_SIZE); @@ -511,7 +511,8 @@ int cifs_get_inode_info(struct inode **pinode, } spin_lock(&inode->i_lock); - if (is_size_safe_to_change(cifsInfo, le64_to_cpu(pfindData->EndOfFile))) { + if (is_size_safe_to_change(cifsInfo, + le64_to_cpu(pfindData->EndOfFile))) { /* can not safely shrink the file size here if the client is writing to it due to potential races */ i_size_write(inode, le64_to_cpu(pfindData->EndOfFile)); @@ -931,7 +932,7 @@ int cifs_mkdir(struct inode *inode, struct dentry *direntry, int mode) (CIFS_UNIX_POSIX_PATH_OPS_CAP & le64_to_cpu(pTcon->fsUnixInfo.Capability))) { u32 oplock = 0; - FILE_UNIX_BASIC_INFO * pInfo = + FILE_UNIX_BASIC_INFO *pInfo = kzalloc(sizeof(FILE_UNIX_BASIC_INFO), GFP_KERNEL); if (pInfo == NULL) { rc = -ENOMEM; @@ -1610,10 +1611,11 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) #ifdef CONFIG_CIFS_EXPERIMENTAL if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) rc = mode_to_acl(direntry->d_inode, full_path, mode); - else if ((mode & S_IWUGO) == 0) /* not writeable */ { + else if ((mode & S_IWUGO) == 0) { #else - if ((mode & S_IWUGO) == 0) /* not writeable */ { + if ((mode & S_IWUGO) == 0) { #endif + /* not writeable */ if ((cifsInode->cifsAttrs & ATTR_READONLY) == 0) { set_dosattr = TRUE; time_buf.Attributes = -- cgit v1.2.3-59-g8ed1b From 6103335de8afa5d780dcd512abe85c696af7b040 Mon Sep 17 00:00:00 2001 From: Steve French Date: Wed, 9 Jan 2008 16:21:36 +0000 Subject: [CIFS] DNS name resolution helper upcall for cifs Adds additional option CIFS_DFS_UPCALL to fs/Kconfig for enabling DFS support. Resolved IP address is saved as a string in the key payload. Igor has a series of related patches that will follow which finish up CIFS DFS support Acked-by: Igor Mammedov Signed-off-by: Steve French --- fs/Kconfig | 39 ++++++++++++++++++++++++++------------- fs/cifs/Makefile | 2 ++ fs/cifs/cifsfs.c | 15 ++++++++++++++- 3 files changed, 42 insertions(+), 14 deletions(-) diff --git a/fs/Kconfig b/fs/Kconfig index 487236c65837..18cd22149466 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -1905,13 +1905,15 @@ config CIFS file servers such as Windows 2000 (including Windows 2003, NT 4 and Windows XP) as well by Samba (which provides excellent CIFS server support for Linux and many other operating systems). Limited - support for OS/2 and Windows ME and similar servers is provided as well. - - The intent of the cifs module is to provide an advanced - network file system client for mounting to CIFS compliant servers, - including support for dfs (hierarchical name space), secure per-user - session establishment, safe distributed caching (oplock), optional - packet signing, Unicode and other internationalization improvements. + support for OS/2 and Windows ME and similar servers is provided as + well. + + The cifs module provides an advanced network file system + client for mounting to CIFS compliant servers. It includes + support for DFS (hierarchical name space), secure per-user + session establishment via Kerberos or NTLM or NTLMv2, + safe distributed caching (oplock), optional packet + signing, Unicode and other internationalization improvements. If you need to mount to Samba or Windows from this machine, say Y. config CIFS_STATS @@ -1943,7 +1945,8 @@ config CIFS_WEAK_PW_HASH (since 1997) support stronger NTLM (and even NTLMv2 and Kerberos) security mechanisms. These hash the password more securely than the mechanisms used in the older LANMAN version of the - SMB protocol needed to establish sessions with old SMB servers. + SMB protocol but LANMAN based authentication is needed to + establish sessions with some old SMB servers. Enabling this option allows the cifs module to mount to older LANMAN based servers such as OS/2 and Windows 95, but such @@ -1951,8 +1954,8 @@ config CIFS_WEAK_PW_HASH security mechanisms if you are on a public network. Unless you have a need to access old SMB servers (and are on a private network) you probably want to say N. Even if this support - is enabled in the kernel build, they will not be used - automatically. At runtime LANMAN mounts are disabled but + is enabled in the kernel build, LANMAN authentication will not be + used automatically. At runtime LANMAN mounts are disabled but can be set to required (or optional) either in /proc/fs/cifs (see fs/cifs/README for more detail) or via an option on the mount command. This support is disabled by @@ -2018,12 +2021,22 @@ config CIFS_UPCALL depends on CIFS_EXPERIMENTAL depends on KEYS help - Enables an upcall mechanism for CIFS which will be used to contact - userspace helper utilities to provide SPNEGO packaged Kerberos - tickets which are needed to mount to certain secure servers + Enables an upcall mechanism for CIFS which accesses + userspace helper utilities to provide SPNEGO packaged (RFC 4178) + Kerberos tickets which are needed to mount to certain secure servers (for which more secure Kerberos authentication is required). If unsure, say N. +config CIFS_DFS_UPCALL + bool "DFS feature support (EXPERIMENTAL)" + depends on CIFS_EXPERIMENTAL + depends on KEYS + help + Enables an upcall mechanism for CIFS which contacts userspace + helper utilities to provide server name resolution (host names to + IP addresses) which is needed for implicit mounts of DFS junction + points. If unsure, say N. + config NCP_FS tristate "NCP file system support (to mount NetWare volumes)" depends on IPX!=n || INET diff --git a/fs/cifs/Makefile b/fs/cifs/Makefile index 45e42fb97c19..09898b8dc69b 100644 --- a/fs/cifs/Makefile +++ b/fs/cifs/Makefile @@ -9,3 +9,5 @@ cifs-y := cifsfs.o cifssmb.o cifs_debug.o connect.o dir.o file.o inode.o \ readdir.o ioctl.o sess.o export.o cifsacl.o cifs-$(CONFIG_CIFS_UPCALL) += cifs_spnego.o + +cifs-$(CONFIG_CIFS_DFS_UPCALL) += dns_resolve.o diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 093beaa3900d..000b4a5d3219 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -44,6 +44,7 @@ #include "cifs_fs_sb.h" #include #include +#include "dns_resolve.h" #include "cifs_spnego.h" #define CIFS_MAGIC_NUMBER 0xFF534D42 /* the first four bytes of SMB PDUs */ @@ -1014,12 +1015,17 @@ init_cifs(void) rc = register_key_type(&cifs_spnego_key_type); if (rc) goto out_unregister_filesystem; +#endif +#ifdef CONFIG_CIFS_DFS_UPCALL + rc = register_key_type(&key_type_dns_resolver); + if (rc) + goto out_unregister_key_type; #endif oplockThread = kthread_run(cifs_oplock_thread, NULL, "cifsoplockd"); if (IS_ERR(oplockThread)) { rc = PTR_ERR(oplockThread); cERROR(1, ("error %d create oplock thread", rc)); - goto out_unregister_key_type; + goto out_unregister_dfs_key_type; } dnotifyThread = kthread_run(cifs_dnotify_thread, NULL, "cifsdnotifyd"); @@ -1033,7 +1039,11 @@ init_cifs(void) out_stop_oplock_thread: kthread_stop(oplockThread); + out_unregister_dfs_key_type: +#ifdef CONFIG_CIFS_DFS_UPCALL + unregister_key_type(&key_type_dns_resolver); out_unregister_key_type: +#endif #ifdef CONFIG_CIFS_UPCALL unregister_key_type(&cifs_spnego_key_type); out_unregister_filesystem: @@ -1059,6 +1069,9 @@ exit_cifs(void) #ifdef CONFIG_PROC_FS cifs_proc_clean(); #endif +#ifdef CONFIG_CIFS_DFS_UPCALL + unregister_key_type(&key_type_dns_resolver); +#endif #ifdef CONFIG_CIFS_UPCALL unregister_key_type(&cifs_spnego_key_type); #endif -- cgit v1.2.3-59-g8ed1b From 197c183f3526dc08aa52ca97ec66c268442d4b84 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 10 Jan 2008 17:10:23 +0000 Subject: [CIFS] Forgot to add two new files from previous commit Thanks to Igor for noticing this. CC: Igor Mammedov Signed-off-by: Steve French --- fs/cifs/dns_resolve.c | 123 ++++++++++++++++++++++++++++++++++++++++++++++++++ fs/cifs/dns_resolve.h | 32 +++++++++++++ 2 files changed, 155 insertions(+) create mode 100644 fs/cifs/dns_resolve.c create mode 100644 fs/cifs/dns_resolve.h diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c new file mode 100644 index 000000000000..777a086abd6f --- /dev/null +++ b/fs/cifs/dns_resolve.c @@ -0,0 +1,123 @@ +/* + * fs/cifs/dns_resolve.c + * + * Copyright (c) 2007 Igor Mammedov + * Author(s): Igor Mammedov (niallain@gmail.com) + * Steve French (sfrench@us.ibm.com) + * + * Contains the CIFS DFS upcall routines used for hostname to + * IP address translation. + * + * This library is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published + * by the Free Software Foundation; either version 2.1 of the License, or + * (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this library; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include "dns_resolve.h" +#include "cifsglob.h" +#include "cifsproto.h" +#include "cifs_debug.h" + +static int dns_resolver_instantiate(struct key *key, const void *data, + size_t datalen) +{ + int rc = 0; + char *ip; + + ip = kmalloc(datalen+1, GFP_KERNEL); + if (!ip) + return -ENOMEM; + + memcpy(ip, data, datalen); + ip[datalen] = '\0'; + + rcu_assign_pointer(key->payload.data, ip); + + return rc; +} + +struct key_type key_type_dns_resolver = { + .name = "dns_resolver", + .def_datalen = sizeof(struct in_addr), + .describe = user_describe, + .instantiate = dns_resolver_instantiate, + .match = user_match, +}; + + +/* Resolves server name to ip address. + * input: + * unc - server UNC + * output: + * *ip_addr - pointer to server ip, caller responcible for freeing it. + * return 0 on success + */ +int +dns_resolve_server_name_to_ip(const char *unc, char **ip_addr) { + int rc = -EAGAIN; + struct key *rkey; + char *name; + int len; + + if ((!ip_addr) || (!unc)) + return -EINVAL; + + /* search for server name delimiter */ + len = strlen(unc); + if (len < 3) { + cFYI(1, ("%s: unc is too short: %s", __FUNCTION__, unc)); + return -EINVAL; + } + len -= 2; + name = memchr(unc+2, '\\', len); + if (!name) { + cFYI(1, ("%s: probably server name is whole unc: %s", + __FUNCTION__, unc)); + } else { + len = (name - unc) - 2/* leading // */; + } + + name = kmalloc(len+1, GFP_KERNEL); + if (!name) { + rc = -ENOMEM; + return rc; + } + memcpy(name, unc+2, len); + name[len] = 0; + + rkey = request_key(&key_type_dns_resolver, name, ""); + if (!IS_ERR(rkey)) { + len = strlen(rkey->payload.data); + *ip_addr = kmalloc(len+1, GFP_KERNEL); + if (*ip_addr) { + memcpy(*ip_addr, rkey->payload.data, len); + (*ip_addr)[len] = '\0'; + cFYI(1, ("%s: resolved: %s to %s", __FUNCTION__, + rkey->description, + *ip_addr + )); + rc = 0; + } else { + rc = -ENOMEM; + } + key_put(rkey); + } else { + cERROR(1, ("%s: unable to resolve: %s", __FUNCTION__, name)); + } + + kfree(name); + return rc; +} + + diff --git a/fs/cifs/dns_resolve.h b/fs/cifs/dns_resolve.h new file mode 100644 index 000000000000..073fdc3db419 --- /dev/null +++ b/fs/cifs/dns_resolve.h @@ -0,0 +1,32 @@ +/* + * fs/cifs/dns_resolve.h -- DNS Resolver upcall management for CIFS DFS + * Handles host name to IP address resolution + * + * Copyright (c) International Business Machines Corp., 2008 + * Author(s): Steve French (sfrench@us.ibm.com) + * + * This library is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published + * by the Free Software Foundation; either version 2.1 of the License, or + * (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this library; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _DNS_RESOLVE_H +#define _DNS_RESOLVE_H + +#ifdef __KERNEL__ +#include +extern struct key_type key_type_dns_resolver; +extern int dns_resolve_server_name_to_ip(const char *unc, char **ip_addr); +#endif /* KERNEL */ + +#endif /* _DNS_RESOLVE_H */ -- cgit v1.2.3-59-g8ed1b From 23e353c8a681cc30d42fbd4f2c2be85c44fe209b Mon Sep 17 00:00:00 2001 From: Joy Latten Date: Tue, 23 Oct 2007 08:50:32 +0800 Subject: [CRYPTO] ctr: Add CTR (Counter) block cipher mode This patch implements CTR mode for IPsec. It is based off of RFC 3686. Please note: 1. CTR turns a block cipher into a stream cipher. Encryption is done in blocks, however the last block may be a partial block. A "counter block" is encrypted, creating a keystream that is xor'ed with the plaintext. The counter portion of the counter block is incremented after each block of plaintext is encrypted. Decryption is performed in same manner. 2. The CTR counterblock is composed of, nonce + IV + counter The size of the counterblock is equivalent to the blocksize of the cipher. sizeof(nonce) + sizeof(IV) + sizeof(counter) = blocksize The CTR template requires the name of the cipher algorithm, the sizeof the nonce, and the sizeof the iv. ctr(cipher,sizeof_nonce,sizeof_iv) So for example, ctr(aes,4,8) specifies the counterblock will be composed of 4 bytes from a nonce, 8 bytes from the iv, and 4 bytes for counter since aes has a blocksize of 16 bytes. 3. The counter portion of the counter block is stored in big endian for conformance to rfc 3686. Signed-off-by: Joy Latten Signed-off-by: Herbert Xu --- crypto/Kconfig | 9 ++ crypto/Makefile | 1 + crypto/ctr.c | 369 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ crypto/tcrypt.c | 8 ++ crypto/tcrypt.h | 185 ++++++++++++++++++++++++++++ 5 files changed, 572 insertions(+) create mode 100644 crypto/ctr.c diff --git a/crypto/Kconfig b/crypto/Kconfig index 083d2e1dfc21..1f32071a3068 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -195,6 +195,15 @@ config CRYPTO_XTS key size 256, 384 or 512 bits. This implementation currently can't handle a sectorsize which is not a multiple of 16 bytes. +config CRYPTO_CTR + tristate "CTR support" + select CRYPTO_BLKCIPHER + select CRYPTO_MANAGER + default m + help + CTR: Counter mode + This block cipher algorithm is required for IPSec. + config CRYPTO_CRYPTD tristate "Software async crypto daemon" select CRYPTO_ABLKCIPHER diff --git a/crypto/Makefile b/crypto/Makefile index 43c2a0dc9936..1f87db2e45b9 100644 --- a/crypto/Makefile +++ b/crypto/Makefile @@ -32,6 +32,7 @@ obj-$(CONFIG_CRYPTO_CBC) += cbc.o obj-$(CONFIG_CRYPTO_PCBC) += pcbc.o obj-$(CONFIG_CRYPTO_LRW) += lrw.o obj-$(CONFIG_CRYPTO_XTS) += xts.o +obj-$(CONFIG_CRYPTO_CTR) += ctr.o obj-$(CONFIG_CRYPTO_CRYPTD) += cryptd.o obj-$(CONFIG_CRYPTO_DES) += des_generic.o obj-$(CONFIG_CRYPTO_FCRYPT) += fcrypt.o diff --git a/crypto/ctr.c b/crypto/ctr.c new file mode 100644 index 000000000000..810d5ec2d5d2 --- /dev/null +++ b/crypto/ctr.c @@ -0,0 +1,369 @@ +/* + * CTR: Counter mode + * + * (C) Copyright IBM Corp. 2007 - Joy Latten + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +struct ctr_instance_ctx { + struct crypto_spawn alg; + unsigned int noncesize; + unsigned int ivsize; +}; + +struct crypto_ctr_ctx { + struct crypto_cipher *child; + u8 *nonce; +}; + +static inline void __ctr_inc_byte(u8 *a, unsigned int size) +{ + u8 *b = (a + size); + u8 c; + + for (; size; size--) { + c = *--b + 1; + *b = c; + if (c) + break; + } +} + +static void ctr_inc_quad(u8 *a, unsigned int size) +{ + __be32 *b = (__be32 *)(a + size); + u32 c; + + for (; size >= 4; size -=4) { + c = be32_to_cpu(*--b) + 1; + *b = cpu_to_be32(c); + if (c) + return; + } + + __ctr_inc_byte(a, size); +} + +static void xor_byte(u8 *a, const u8 *b, unsigned int bs) +{ + for (; bs; bs--) + *a++ ^= *b++; +} + +static void xor_quad(u8 *dst, const u8 *src, unsigned int bs) +{ + u32 *a = (u32 *)dst; + u32 *b = (u32 *)src; + + for (; bs >= 4; bs -= 4) + *a++ ^= *b++; + + xor_byte((u8 *)a, (u8 *)b, bs); +} + +static int crypto_ctr_setkey(struct crypto_tfm *parent, const u8 *key, + unsigned int keylen) +{ + struct crypto_ctr_ctx *ctx = crypto_tfm_ctx(parent); + struct crypto_cipher *child = ctx->child; + struct ctr_instance_ctx *ictx = + crypto_instance_ctx(crypto_tfm_alg_instance(parent)); + unsigned int noncelen = ictx->noncesize; + int err = 0; + + /* the nonce is stored in bytes at end of key */ + if (keylen < noncelen) + return -EINVAL; + + memcpy(ctx->nonce, key + (keylen - noncelen), noncelen); + + keylen -= noncelen; + + crypto_cipher_clear_flags(child, CRYPTO_TFM_REQ_MASK); + crypto_cipher_set_flags(child, crypto_tfm_get_flags(parent) & + CRYPTO_TFM_REQ_MASK); + err = crypto_cipher_setkey(child, key, keylen); + crypto_tfm_set_flags(parent, crypto_cipher_get_flags(child) & + CRYPTO_TFM_RES_MASK); + + return err; +} + +static int crypto_ctr_crypt_segment(struct blkcipher_walk *walk, + struct crypto_cipher *tfm, u8 *ctrblk, + unsigned int countersize) +{ + void (*fn)(struct crypto_tfm *, u8 *, const u8 *) = + crypto_cipher_alg(tfm)->cia_encrypt; + unsigned int bsize = crypto_cipher_blocksize(tfm); + unsigned long alignmask = crypto_cipher_alignmask(tfm); + u8 ks[bsize + alignmask]; + u8 *keystream = (u8 *)ALIGN((unsigned long)ks, alignmask + 1); + u8 *src = walk->src.virt.addr; + u8 *dst = walk->dst.virt.addr; + unsigned int nbytes = walk->nbytes; + + do { + /* create keystream */ + fn(crypto_cipher_tfm(tfm), keystream, ctrblk); + xor_quad(keystream, src, min(nbytes, bsize)); + + /* copy result into dst */ + memcpy(dst, keystream, min(nbytes, bsize)); + + /* increment counter in counterblock */ + ctr_inc_quad(ctrblk + (bsize - countersize), countersize); + + if (nbytes < bsize) + break; + + src += bsize; + dst += bsize; + nbytes -= bsize; + + } while (nbytes); + + return 0; +} + +static int crypto_ctr_crypt_inplace(struct blkcipher_walk *walk, + struct crypto_cipher *tfm, u8 *ctrblk, + unsigned int countersize) +{ + void (*fn)(struct crypto_tfm *, u8 *, const u8 *) = + crypto_cipher_alg(tfm)->cia_encrypt; + unsigned int bsize = crypto_cipher_blocksize(tfm); + unsigned long alignmask = crypto_cipher_alignmask(tfm); + unsigned int nbytes = walk->nbytes; + u8 *src = walk->src.virt.addr; + u8 ks[bsize + alignmask]; + u8 *keystream = (u8 *)ALIGN((unsigned long)ks, alignmask + 1); + + do { + /* create keystream */ + fn(crypto_cipher_tfm(tfm), keystream, ctrblk); + xor_quad(src, keystream, min(nbytes, bsize)); + + /* increment counter in counterblock */ + ctr_inc_quad(ctrblk + (bsize - countersize), countersize); + + if (nbytes < bsize) + break; + + src += bsize; + nbytes -= bsize; + + } while (nbytes); + + return 0; +} + +static int crypto_ctr_crypt(struct blkcipher_desc *desc, + struct scatterlist *dst, struct scatterlist *src, + unsigned int nbytes) +{ + struct blkcipher_walk walk; + struct crypto_blkcipher *tfm = desc->tfm; + struct crypto_ctr_ctx *ctx = crypto_blkcipher_ctx(tfm); + struct crypto_cipher *child = ctx->child; + unsigned int bsize = crypto_cipher_blocksize(child); + struct ctr_instance_ctx *ictx = + crypto_instance_ctx(crypto_tfm_alg_instance(&tfm->base)); + unsigned long alignmask = crypto_cipher_alignmask(child); + u8 cblk[bsize + alignmask]; + u8 *counterblk = (u8 *)ALIGN((unsigned long)cblk, alignmask + 1); + unsigned int countersize; + int err; + + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt_block(desc, &walk, bsize); + + /* set up counter block */ + memset(counterblk, 0 , bsize); + memcpy(counterblk, ctx->nonce, ictx->noncesize); + memcpy(counterblk + ictx->noncesize, walk.iv, ictx->ivsize); + + /* initialize counter portion of counter block */ + countersize = bsize - ictx->noncesize - ictx->ivsize; + ctr_inc_quad(counterblk + (bsize - countersize), countersize); + + while (walk.nbytes) { + if (walk.src.virt.addr == walk.dst.virt.addr) + nbytes = crypto_ctr_crypt_inplace(&walk, child, + counterblk, + countersize); + else + nbytes = crypto_ctr_crypt_segment(&walk, child, + counterblk, + countersize); + + err = blkcipher_walk_done(desc, &walk, nbytes); + } + return err; +} + +static int crypto_ctr_init_tfm(struct crypto_tfm *tfm) +{ + struct crypto_instance *inst = (void *)tfm->__crt_alg; + struct ctr_instance_ctx *ictx = crypto_instance_ctx(inst); + struct crypto_ctr_ctx *ctx = crypto_tfm_ctx(tfm); + struct crypto_cipher *cipher; + + ctx->nonce = kzalloc(ictx->noncesize, GFP_KERNEL); + if (!ctx->nonce) + return -ENOMEM; + + cipher = crypto_spawn_cipher(&ictx->alg); + if (IS_ERR(cipher)) + return PTR_ERR(cipher); + + ctx->child = cipher; + + return 0; +} + +static void crypto_ctr_exit_tfm(struct crypto_tfm *tfm) +{ + struct crypto_ctr_ctx *ctx = crypto_tfm_ctx(tfm); + + kfree(ctx->nonce); + crypto_free_cipher(ctx->child); +} + +static struct crypto_instance *crypto_ctr_alloc(struct rtattr **tb) +{ + struct crypto_instance *inst; + struct crypto_alg *alg; + struct ctr_instance_ctx *ictx; + unsigned int noncesize; + unsigned int ivsize; + int err; + + err = crypto_check_attr_type(tb, CRYPTO_ALG_TYPE_BLKCIPHER); + if (err) + return ERR_PTR(err); + + alg = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_CIPHER, + CRYPTO_ALG_TYPE_MASK); + if (IS_ERR(alg)) + return ERR_PTR(PTR_ERR(alg)); + + err = crypto_attr_u32(tb[2], &noncesize); + if (err) + goto out_put_alg; + + err = crypto_attr_u32(tb[3], &ivsize); + if (err) + goto out_put_alg; + + /* verify size of nonce + iv + counter */ + err = -EINVAL; + if ((noncesize + ivsize) >= alg->cra_blocksize) + goto out_put_alg; + + inst = kzalloc(sizeof(*inst) + sizeof(*ictx), GFP_KERNEL); + err = -ENOMEM; + if (!inst) + goto out_put_alg; + + err = -ENAMETOOLONG; + if (snprintf(inst->alg.cra_name, CRYPTO_MAX_ALG_NAME, + "ctr(%s,%u,%u)", alg->cra_name, noncesize, + ivsize) >= CRYPTO_MAX_ALG_NAME) { + goto err_free_inst; + } + + if (snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME, + "ctr(%s,%u,%u)", alg->cra_driver_name, noncesize, + ivsize) >= CRYPTO_MAX_ALG_NAME) { + goto err_free_inst; + } + + ictx = crypto_instance_ctx(inst); + ictx->noncesize = noncesize; + ictx->ivsize = ivsize; + + err = crypto_init_spawn(&ictx->alg, alg, inst, + CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_ASYNC); + if (err) + goto err_free_inst; + + err = 0; + inst->alg.cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER; + inst->alg.cra_priority = alg->cra_priority; + inst->alg.cra_blocksize = 1; + inst->alg.cra_alignmask = 3; + inst->alg.cra_type = &crypto_blkcipher_type; + + inst->alg.cra_blkcipher.ivsize = ivsize; + inst->alg.cra_blkcipher.min_keysize = alg->cra_cipher.cia_min_keysize + + noncesize; + inst->alg.cra_blkcipher.max_keysize = alg->cra_cipher.cia_max_keysize + + noncesize; + + inst->alg.cra_ctxsize = sizeof(struct crypto_ctr_ctx); + + inst->alg.cra_init = crypto_ctr_init_tfm; + inst->alg.cra_exit = crypto_ctr_exit_tfm; + + inst->alg.cra_blkcipher.setkey = crypto_ctr_setkey; + inst->alg.cra_blkcipher.encrypt = crypto_ctr_crypt; + inst->alg.cra_blkcipher.decrypt = crypto_ctr_crypt; + +err_free_inst: + if (err) + kfree(inst); + +out_put_alg: + crypto_mod_put(alg); + + if (err) + inst = ERR_PTR(err); + + return inst; +} + +static void crypto_ctr_free(struct crypto_instance *inst) +{ + struct ctr_instance_ctx *ictx = crypto_instance_ctx(inst); + + crypto_drop_spawn(&ictx->alg); + kfree(inst); +} + +static struct crypto_template crypto_ctr_tmpl = { + .name = "ctr", + .alloc = crypto_ctr_alloc, + .free = crypto_ctr_free, + .module = THIS_MODULE, +}; + +static int __init crypto_ctr_module_init(void) +{ + return crypto_register_template(&crypto_ctr_tmpl); +} + +static void __exit crypto_ctr_module_exit(void) +{ + crypto_unregister_template(&crypto_ctr_tmpl); +} + +module_init(crypto_ctr_module_init); +module_exit(crypto_ctr_module_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("CTR Counter block mode"); diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c index 24141fb6f5cb..640cbcad32a1 100644 --- a/crypto/tcrypt.c +++ b/crypto/tcrypt.c @@ -969,6 +969,10 @@ static void do_test(void) AES_XTS_ENC_TEST_VECTORS); test_cipher("xts(aes)", DECRYPT, aes_xts_dec_tv_template, AES_XTS_DEC_TEST_VECTORS); + test_cipher("ctr(aes,4,8)", ENCRYPT, aes_ctr_enc_tv_template, + AES_CTR_ENC_TEST_VECTORS); + test_cipher("ctr(aes,4,8)", DECRYPT, aes_ctr_dec_tv_template, + AES_CTR_DEC_TEST_VECTORS); //CAST5 test_cipher("ecb(cast5)", ENCRYPT, cast5_enc_tv_template, @@ -1156,6 +1160,10 @@ static void do_test(void) AES_XTS_ENC_TEST_VECTORS); test_cipher("xts(aes)", DECRYPT, aes_xts_dec_tv_template, AES_XTS_DEC_TEST_VECTORS); + test_cipher("ctr(aes,4,8)", ENCRYPT, aes_ctr_enc_tv_template, + AES_CTR_ENC_TEST_VECTORS); + test_cipher("ctr(aes,4,8)", DECRYPT, aes_ctr_dec_tv_template, + AES_CTR_DEC_TEST_VECTORS); break; case 11: diff --git a/crypto/tcrypt.h b/crypto/tcrypt.h index ec861388d9a0..f7f9b2379270 100644 --- a/crypto/tcrypt.h +++ b/crypto/tcrypt.h @@ -2146,6 +2146,8 @@ static struct cipher_testvec cast6_dec_tv_template[] = { #define AES_LRW_DEC_TEST_VECTORS 8 #define AES_XTS_ENC_TEST_VECTORS 4 #define AES_XTS_DEC_TEST_VECTORS 4 +#define AES_CTR_ENC_TEST_VECTORS 6 +#define AES_CTR_DEC_TEST_VECTORS 6 static struct cipher_testvec aes_enc_tv_template[] = { { /* From FIPS-197 */ @@ -3180,6 +3182,189 @@ static struct cipher_testvec aes_xts_dec_tv_template[] = { } }; + +static struct cipher_testvec aes_ctr_enc_tv_template[] = { + { /* From RFC 3686 */ + .key = { 0xae, 0x68, 0x52, 0xf8, 0x12, 0x10, 0x67, 0xcc, + 0x4b, 0xf7, 0xa5, 0x76, 0x55, 0x77, 0xf3, 0x9e, + 0x00, 0x00, 0x00, 0x30 }, + .klen = 20, + .iv = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }, + .input = { "Single block msg" }, + .ilen = 16, + .result = { 0xe4, 0x09, 0x5d, 0x4f, 0xb7, 0xa7, 0xb3, 0x79, + 0x2d, 0x61, 0x75, 0xa3, 0x26, 0x13, 0x11, 0xb8 }, + .rlen = 16, + }, { + .key = { 0x7e, 0x24, 0x06, 0x78, 0x17, 0xfa, 0xe0, 0xd7, + 0x43, 0xd6, 0xce, 0x1f, 0x32, 0x53, 0x91, 0x63, + 0x00, 0x6c, 0xb6, 0xdb }, + .klen = 20, + .iv = { 0xc0, 0x54, 0x3b, 0x59, 0xda, 0x48, 0xd9, 0x0b }, + .input = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, + 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f }, + .ilen = 32, + .result = { 0x51, 0x04, 0xa1, 0x06, 0x16, 0x8a, 0x72, 0xd9, + 0x79, 0x0d, 0x41, 0xee, 0x8e, 0xda, 0xd3, 0x88, + 0xeb, 0x2e, 0x1e, 0xfc, 0x46, 0xda, 0x57, 0xc8, + 0xfc, 0xe6, 0x30, 0xdf, 0x91, 0x41, 0xbe, 0x28 }, + .rlen = 32, + }, { + .key = { 0x16, 0xaf, 0x5b, 0x14, 0x5f, 0xc9, 0xf5, 0x79, + 0xc1, 0x75, 0xf9, 0x3e, 0x3b, 0xfb, 0x0e, 0xed, + 0x86, 0x3d, 0x06, 0xcc, 0xfd, 0xb7, 0x85, 0x15, + 0x00, 0x00, 0x00, 0x48 }, + .klen = 28, + .iv = { 0x36, 0x73, 0x3c, 0x14, 0x7d, 0x6d, 0x93, 0xcb }, + .input = { "Single block msg" }, + .ilen = 16, + .result = { 0x4b, 0x55, 0x38, 0x4f, 0xe2, 0x59, 0xc9, 0xc8, + 0x4e, 0x79, 0x35, 0xa0, 0x03, 0xcb, 0xe9, 0x28 }, + .rlen = 16, + }, { + .key = { 0x7c, 0x5c, 0xb2, 0x40, 0x1b, 0x3d, 0xc3, 0x3c, + 0x19, 0xe7, 0x34, 0x08, 0x19, 0xe0, 0xf6, 0x9c, + 0x67, 0x8c, 0x3d, 0xb8, 0xe6, 0xf6, 0xa9, 0x1a, + 0x00, 0x96, 0xb0, 0x3b }, + .klen = 28, + .iv = { 0x02, 0x0c, 0x6e, 0xad, 0xc2, 0xcb, 0x50, 0x0d }, + .input = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, + 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f }, + .ilen = 32, + .result = { 0x45, 0x32, 0x43, 0xfc, 0x60, 0x9b, 0x23, 0x32, + 0x7e, 0xdf, 0xaa, 0xfa, 0x71, 0x31, 0xcd, 0x9f, + 0x84, 0x90, 0x70, 0x1c, 0x5a, 0xd4, 0xa7, 0x9c, + 0xfc, 0x1f, 0xe0, 0xff, 0x42, 0xf4, 0xfb, 0x00 }, + .rlen = 32, + }, { + .key = { 0x77, 0x6b, 0xef, 0xf2, 0x85, 0x1d, 0xb0, 0x6f, + 0x4c, 0x8a, 0x05, 0x42, 0xc8, 0x69, 0x6f, 0x6c, + 0x6a, 0x81, 0xaf, 0x1e, 0xec, 0x96, 0xb4, 0xd3, + 0x7f, 0xc1, 0xd6, 0x89, 0xe6, 0xc1, 0xc1, 0x04, + 0x00, 0x00, 0x00, 0x60 }, + .klen = 36, + .iv = { 0xdb, 0x56, 0x72, 0xc9, 0x7a, 0xa8, 0xf0, 0xb2 }, + .input = { "Single block msg" }, + .ilen = 16, + .result = { 0x14, 0x5a, 0xd0, 0x1d, 0xbf, 0x82, 0x4e, 0xc7, + 0x56, 0x08, 0x63, 0xdc, 0x71, 0xe3, 0xe0, 0xc0 }, + .rlen = 16, + }, { + .key = { 0xf6, 0xd6, 0x6d, 0x6b, 0xd5, 0x2d, 0x59, 0xbb, + 0x07, 0x96, 0x36, 0x58, 0x79, 0xef, 0xf8, 0x86, + 0xc6, 0x6d, 0xd5, 0x1a, 0x5b, 0x6a, 0x99, 0x74, + 0x4b, 0x50, 0x59, 0x0c, 0x87, 0xa2, 0x38, 0x84, + 0x00, 0xfa, 0xac, 0x24 }, + .klen = 36, + .iv = { 0xc1, 0x58, 0x5e, 0xf1, 0x5a, 0x43, 0xd8, 0x75 }, + .input = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, + 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f }, + .ilen = 32, + .result = { 0xf0, 0x5e, 0x23, 0x1b, 0x38, 0x94, 0x61, 0x2c, + 0x49, 0xee, 0x00, 0x0b, 0x80, 0x4e, 0xb2, 0xa9, + 0xb8, 0x30, 0x6b, 0x50, 0x8f, 0x83, 0x9d, 0x6a, + 0x55, 0x30, 0x83, 0x1d, 0x93, 0x44, 0xaf, 0x1c }, + .rlen = 32, + }, +}; + +static struct cipher_testvec aes_ctr_dec_tv_template[] = { + { /* From RFC 3686 */ + .key = { 0xae, 0x68, 0x52, 0xf8, 0x12, 0x10, 0x67, 0xcc, + 0x4b, 0xf7, 0xa5, 0x76, 0x55, 0x77, 0xf3, 0x9e, + 0x00, 0x00, 0x00, 0x30 }, + .klen = 20, + .iv = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }, + .input = { 0xe4, 0x09, 0x5d, 0x4f, 0xb7, 0xa7, 0xb3, 0x79, + 0x2d, 0x61, 0x75, 0xa3, 0x26, 0x13, 0x11, 0xb8 }, + .ilen = 16, + .result = { "Single block msg" }, + .rlen = 16, + }, { + .key = { 0x7e, 0x24, 0x06, 0x78, 0x17, 0xfa, 0xe0, 0xd7, + 0x43, 0xd6, 0xce, 0x1f, 0x32, 0x53, 0x91, 0x63, + 0x00, 0x6c, 0xb6, 0xdb }, + .klen = 20, + .iv = { 0xc0, 0x54, 0x3b, 0x59, 0xda, 0x48, 0xd9, 0x0b }, + .input = { 0x51, 0x04, 0xa1, 0x06, 0x16, 0x8a, 0x72, 0xd9, + 0x79, 0x0d, 0x41, 0xee, 0x8e, 0xda, 0xd3, 0x88, + 0xeb, 0x2e, 0x1e, 0xfc, 0x46, 0xda, 0x57, 0xc8, + 0xfc, 0xe6, 0x30, 0xdf, 0x91, 0x41, 0xbe, 0x28 }, + .ilen = 32, + .result = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, + 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f }, + .rlen = 32, + }, { + .key = { 0x16, 0xaf, 0x5b, 0x14, 0x5f, 0xc9, 0xf5, 0x79, + 0xc1, 0x75, 0xf9, 0x3e, 0x3b, 0xfb, 0x0e, 0xed, + 0x86, 0x3d, 0x06, 0xcc, 0xfd, 0xb7, 0x85, 0x15, + 0x00, 0x00, 0x00, 0x48 }, + .klen = 28, + .iv = { 0x36, 0x73, 0x3c, 0x14, 0x7d, 0x6d, 0x93, 0xcb }, + .input = { 0x4b, 0x55, 0x38, 0x4f, 0xe2, 0x59, 0xc9, 0xc8, + 0x4e, 0x79, 0x35, 0xa0, 0x03, 0xcb, 0xe9, 0x28 }, + .ilen = 16, + .result = { "Single block msg" }, + .rlen = 16, + }, { + .key = { 0x7c, 0x5c, 0xb2, 0x40, 0x1b, 0x3d, 0xc3, 0x3c, + 0x19, 0xe7, 0x34, 0x08, 0x19, 0xe0, 0xf6, 0x9c, + 0x67, 0x8c, 0x3d, 0xb8, 0xe6, 0xf6, 0xa9, 0x1a, + 0x00, 0x96, 0xb0, 0x3b }, + .klen = 28, + .iv = { 0x02, 0x0c, 0x6e, 0xad, 0xc2, 0xcb, 0x50, 0x0d }, + .input = { 0x45, 0x32, 0x43, 0xfc, 0x60, 0x9b, 0x23, 0x32, + 0x7e, 0xdf, 0xaa, 0xfa, 0x71, 0x31, 0xcd, 0x9f, + 0x84, 0x90, 0x70, 0x1c, 0x5a, 0xd4, 0xa7, 0x9c, + 0xfc, 0x1f, 0xe0, 0xff, 0x42, 0xf4, 0xfb, 0x00 }, + .ilen = 32, + .result = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, + 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f }, + .rlen = 32, + }, { + .key = { 0x77, 0x6b, 0xef, 0xf2, 0x85, 0x1d, 0xb0, 0x6f, + 0x4c, 0x8a, 0x05, 0x42, 0xc8, 0x69, 0x6f, 0x6c, + 0x6a, 0x81, 0xaf, 0x1e, 0xec, 0x96, 0xb4, 0xd3, + 0x7f, 0xc1, 0xd6, 0x89, 0xe6, 0xc1, 0xc1, 0x04, + 0x00, 0x00, 0x00, 0x60 }, + .klen = 36, + .iv = { 0xdb, 0x56, 0x72, 0xc9, 0x7a, 0xa8, 0xf0, 0xb2 }, + .input = { 0x14, 0x5a, 0xd0, 0x1d, 0xbf, 0x82, 0x4e, 0xc7, + 0x56, 0x08, 0x63, 0xdc, 0x71, 0xe3, 0xe0, 0xc0 }, + .ilen = 16, + .result = { "Single block msg" }, + .rlen = 16, + }, { + .key = { 0xf6, 0xd6, 0x6d, 0x6b, 0xd5, 0x2d, 0x59, 0xbb, + 0x07, 0x96, 0x36, 0x58, 0x79, 0xef, 0xf8, 0x86, + 0xc6, 0x6d, 0xd5, 0x1a, 0x5b, 0x6a, 0x99, 0x74, + 0x4b, 0x50, 0x59, 0x0c, 0x87, 0xa2, 0x38, 0x84, + 0x00, 0xfa, 0xac, 0x24 }, + .klen = 36, + .iv = { 0xc1, 0x58, 0x5e, 0xf1, 0x5a, 0x43, 0xd8, 0x75 }, + .input = { 0xf0, 0x5e, 0x23, 0x1b, 0x38, 0x94, 0x61, 0x2c, + 0x49, 0xee, 0x00, 0x0b, 0x80, 0x4e, 0xb2, 0xa9, + 0xb8, 0x30, 0x6b, 0x50, 0x8f, 0x83, 0x9d, 0x6a, + 0x55, 0x30, 0x83, 0x1d, 0x93, 0x44, 0xaf, 0x1c }, + .ilen = 32, + .result = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, + 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f }, + .rlen = 32, + }, +}; + /* Cast5 test vectors from RFC 2144 */ #define CAST5_ENC_TEST_VECTORS 3 #define CAST5_DEC_TEST_VECTORS 3 -- cgit v1.2.3-59-g8ed1b From f7d0561ea1dadec5462846520b1f4fb304294fd5 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Fri, 26 Oct 2007 21:31:14 +0800 Subject: [CRYPTO] hifn_795x: HIFN 795x driver This is a driver for HIFN 795x crypto accelerator chips. It passed all tests for AES, DES and DES3_EDE except weak test for DES, since hardware can not determine weak keys. Signed-off-by: Evgeniy Polyakov Signed-off-by: Herbert Xu --- drivers/crypto/Kconfig | 10 + drivers/crypto/Makefile | 1 + drivers/crypto/hifn_795x.c | 2619 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 2630 insertions(+) create mode 100644 drivers/crypto/hifn_795x.c diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig index 5fd6688a444a..1ef7697fc998 100644 --- a/drivers/crypto/Kconfig +++ b/drivers/crypto/Kconfig @@ -83,4 +83,14 @@ config ZCRYPT_MONOLITHIC that contains all parts of the crypto device driver (ap bus, request router and all the card drivers). +config CRYPTO_DEV_HIFN_795X + tristate "Driver HIFN 795x crypto accelerator chips" + select CRYPTO_ALGAPI + select CRYPTO_ABLKCIPHER + select CRYPTO_BLKCIPHER + help + This option allows you to have support for HIFN 795x crypto adapters. + + + endif # CRYPTO_HW diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile index d070030f7d7e..c0327f0dadc5 100644 --- a/drivers/crypto/Makefile +++ b/drivers/crypto/Makefile @@ -1,3 +1,4 @@ obj-$(CONFIG_CRYPTO_DEV_PADLOCK_AES) += padlock-aes.o obj-$(CONFIG_CRYPTO_DEV_PADLOCK_SHA) += padlock-sha.o obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-aes.o +obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c new file mode 100644 index 000000000000..e3376f2236b2 --- /dev/null +++ b/drivers/crypto/hifn_795x.c @@ -0,0 +1,2619 @@ +/* + * 2007+ Copyright (c) Evgeniy Polyakov + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include + +#undef dprintk + +#define HIFN_TEST +//#define HIFN_DEBUG + +#ifdef HIFN_DEBUG +#define dprintk(f, a...) printk(f, ##a) +#else +#define dprintk(f, a...) do {} while (0) +#endif + +static atomic_t hifn_dev_number; + +#define ACRYPTO_OP_DECRYPT 0 +#define ACRYPTO_OP_ENCRYPT 1 +#define ACRYPTO_OP_HMAC 2 +#define ACRYPTO_OP_RNG 3 + +#define ACRYPTO_MODE_ECB 0 +#define ACRYPTO_MODE_CBC 1 +#define ACRYPTO_MODE_CFB 2 +#define ACRYPTO_MODE_OFB 3 + +#define ACRYPTO_TYPE_AES_128 0 +#define ACRYPTO_TYPE_AES_192 1 +#define ACRYPTO_TYPE_AES_256 2 +#define ACRYPTO_TYPE_3DES 3 +#define ACRYPTO_TYPE_DES 4 + +#define PCI_VENDOR_ID_HIFN 0x13A3 +#define PCI_DEVICE_ID_HIFN_7955 0x0020 +#define PCI_DEVICE_ID_HIFN_7956 0x001d + +/* I/O region sizes */ + +#define HIFN_BAR0_SIZE 0x1000 +#define HIFN_BAR1_SIZE 0x2000 +#define HIFN_BAR2_SIZE 0x8000 + +/* DMA registres */ + +#define HIFN_DMA_CRA 0x0C /* DMA Command Ring Address */ +#define HIFN_DMA_SDRA 0x1C /* DMA Source Data Ring Address */ +#define HIFN_DMA_RRA 0x2C /* DMA Result Ring Address */ +#define HIFN_DMA_DDRA 0x3C /* DMA Destination Data Ring Address */ +#define HIFN_DMA_STCTL 0x40 /* DMA Status and Control */ +#define HIFN_DMA_INTREN 0x44 /* DMA Interrupt Enable */ +#define HIFN_DMA_CFG1 0x48 /* DMA Configuration #1 */ +#define HIFN_DMA_CFG2 0x6C /* DMA Configuration #2 */ +#define HIFN_CHIP_ID 0x98 /* Chip ID */ + +/* + * Processing Unit Registers (offset from BASEREG0) + */ +#define HIFN_0_PUDATA 0x00 /* Processing Unit Data */ +#define HIFN_0_PUCTRL 0x04 /* Processing Unit Control */ +#define HIFN_0_PUISR 0x08 /* Processing Unit Interrupt Status */ +#define HIFN_0_PUCNFG 0x0c /* Processing Unit Configuration */ +#define HIFN_0_PUIER 0x10 /* Processing Unit Interrupt Enable */ +#define HIFN_0_PUSTAT 0x14 /* Processing Unit Status/Chip ID */ +#define HIFN_0_FIFOSTAT 0x18 /* FIFO Status */ +#define HIFN_0_FIFOCNFG 0x1c /* FIFO Configuration */ +#define HIFN_0_SPACESIZE 0x20 /* Register space size */ + +/* Processing Unit Control Register (HIFN_0_PUCTRL) */ +#define HIFN_PUCTRL_CLRSRCFIFO 0x0010 /* clear source fifo */ +#define HIFN_PUCTRL_STOP 0x0008 /* stop pu */ +#define HIFN_PUCTRL_LOCKRAM 0x0004 /* lock ram */ +#define HIFN_PUCTRL_DMAENA 0x0002 /* enable dma */ +#define HIFN_PUCTRL_RESET 0x0001 /* Reset processing unit */ + +/* Processing Unit Interrupt Status Register (HIFN_0_PUISR) */ +#define HIFN_PUISR_CMDINVAL 0x8000 /* Invalid command interrupt */ +#define HIFN_PUISR_DATAERR 0x4000 /* Data error interrupt */ +#define HIFN_PUISR_SRCFIFO 0x2000 /* Source FIFO ready interrupt */ +#define HIFN_PUISR_DSTFIFO 0x1000 /* Destination FIFO ready interrupt */ +#define HIFN_PUISR_DSTOVER 0x0200 /* Destination overrun interrupt */ +#define HIFN_PUISR_SRCCMD 0x0080 /* Source command interrupt */ +#define HIFN_PUISR_SRCCTX 0x0040 /* Source context interrupt */ +#define HIFN_PUISR_SRCDATA 0x0020 /* Source data interrupt */ +#define HIFN_PUISR_DSTDATA 0x0010 /* Destination data interrupt */ +#define HIFN_PUISR_DSTRESULT 0x0004 /* Destination result interrupt */ + +/* Processing Unit Configuration Register (HIFN_0_PUCNFG) */ +#define HIFN_PUCNFG_DRAMMASK 0xe000 /* DRAM size mask */ +#define HIFN_PUCNFG_DSZ_256K 0x0000 /* 256k dram */ +#define HIFN_PUCNFG_DSZ_512K 0x2000 /* 512k dram */ +#define HIFN_PUCNFG_DSZ_1M 0x4000 /* 1m dram */ +#define HIFN_PUCNFG_DSZ_2M 0x6000 /* 2m dram */ +#define HIFN_PUCNFG_DSZ_4M 0x8000 /* 4m dram */ +#define HIFN_PUCNFG_DSZ_8M 0xa000 /* 8m dram */ +#define HIFN_PUNCFG_DSZ_16M 0xc000 /* 16m dram */ +#define HIFN_PUCNFG_DSZ_32M 0xe000 /* 32m dram */ +#define HIFN_PUCNFG_DRAMREFRESH 0x1800 /* DRAM refresh rate mask */ +#define HIFN_PUCNFG_DRFR_512 0x0000 /* 512 divisor of ECLK */ +#define HIFN_PUCNFG_DRFR_256 0x0800 /* 256 divisor of ECLK */ +#define HIFN_PUCNFG_DRFR_128 0x1000 /* 128 divisor of ECLK */ +#define HIFN_PUCNFG_TCALLPHASES 0x0200 /* your guess is as good as mine... */ +#define HIFN_PUCNFG_TCDRVTOTEM 0x0100 /* your guess is as good as mine... */ +#define HIFN_PUCNFG_BIGENDIAN 0x0080 /* DMA big endian mode */ +#define HIFN_PUCNFG_BUS32 0x0040 /* Bus width 32bits */ +#define HIFN_PUCNFG_BUS16 0x0000 /* Bus width 16 bits */ +#define HIFN_PUCNFG_CHIPID 0x0020 /* Allow chipid from PUSTAT */ +#define HIFN_PUCNFG_DRAM 0x0010 /* Context RAM is DRAM */ +#define HIFN_PUCNFG_SRAM 0x0000 /* Context RAM is SRAM */ +#define HIFN_PUCNFG_COMPSING 0x0004 /* Enable single compression context */ +#define HIFN_PUCNFG_ENCCNFG 0x0002 /* Encryption configuration */ + +/* Processing Unit Interrupt Enable Register (HIFN_0_PUIER) */ +#define HIFN_PUIER_CMDINVAL 0x8000 /* Invalid command interrupt */ +#define HIFN_PUIER_DATAERR 0x4000 /* Data error interrupt */ +#define HIFN_PUIER_SRCFIFO 0x2000 /* Source FIFO ready interrupt */ +#define HIFN_PUIER_DSTFIFO 0x1000 /* Destination FIFO ready interrupt */ +#define HIFN_PUIER_DSTOVER 0x0200 /* Destination overrun interrupt */ +#define HIFN_PUIER_SRCCMD 0x0080 /* Source command interrupt */ +#define HIFN_PUIER_SRCCTX 0x0040 /* Source context interrupt */ +#define HIFN_PUIER_SRCDATA 0x0020 /* Source data interrupt */ +#define HIFN_PUIER_DSTDATA 0x0010 /* Destination data interrupt */ +#define HIFN_PUIER_DSTRESULT 0x0004 /* Destination result interrupt */ + +/* Processing Unit Status Register/Chip ID (HIFN_0_PUSTAT) */ +#define HIFN_PUSTAT_CMDINVAL 0x8000 /* Invalid command interrupt */ +#define HIFN_PUSTAT_DATAERR 0x4000 /* Data error interrupt */ +#define HIFN_PUSTAT_SRCFIFO 0x2000 /* Source FIFO ready interrupt */ +#define HIFN_PUSTAT_DSTFIFO 0x1000 /* Destination FIFO ready interrupt */ +#define HIFN_PUSTAT_DSTOVER 0x0200 /* Destination overrun interrupt */ +#define HIFN_PUSTAT_SRCCMD 0x0080 /* Source command interrupt */ +#define HIFN_PUSTAT_SRCCTX 0x0040 /* Source context interrupt */ +#define HIFN_PUSTAT_SRCDATA 0x0020 /* Source data interrupt */ +#define HIFN_PUSTAT_DSTDATA 0x0010 /* Destination data interrupt */ +#define HIFN_PUSTAT_DSTRESULT 0x0004 /* Destination result interrupt */ +#define HIFN_PUSTAT_CHIPREV 0x00ff /* Chip revision mask */ +#define HIFN_PUSTAT_CHIPENA 0xff00 /* Chip enabled mask */ +#define HIFN_PUSTAT_ENA_2 0x1100 /* Level 2 enabled */ +#define HIFN_PUSTAT_ENA_1 0x1000 /* Level 1 enabled */ +#define HIFN_PUSTAT_ENA_0 0x3000 /* Level 0 enabled */ +#define HIFN_PUSTAT_REV_2 0x0020 /* 7751 PT6/2 */ +#define HIFN_PUSTAT_REV_3 0x0030 /* 7751 PT6/3 */ + +/* FIFO Status Register (HIFN_0_FIFOSTAT) */ +#define HIFN_FIFOSTAT_SRC 0x7f00 /* Source FIFO available */ +#define HIFN_FIFOSTAT_DST 0x007f /* Destination FIFO available */ + +/* FIFO Configuration Register (HIFN_0_FIFOCNFG) */ +#define HIFN_FIFOCNFG_THRESHOLD 0x0400 /* must be written as 1 */ + +/* + * DMA Interface Registers (offset from BASEREG1) + */ +#define HIFN_1_DMA_CRAR 0x0c /* DMA Command Ring Address */ +#define HIFN_1_DMA_SRAR 0x1c /* DMA Source Ring Address */ +#define HIFN_1_DMA_RRAR 0x2c /* DMA Result Ring Address */ +#define HIFN_1_DMA_DRAR 0x3c /* DMA Destination Ring Address */ +#define HIFN_1_DMA_CSR 0x40 /* DMA Status and Control */ +#define HIFN_1_DMA_IER 0x44 /* DMA Interrupt Enable */ +#define HIFN_1_DMA_CNFG 0x48 /* DMA Configuration */ +#define HIFN_1_PLL 0x4c /* 795x: PLL config */ +#define HIFN_1_7811_RNGENA 0x60 /* 7811: rng enable */ +#define HIFN_1_7811_RNGCFG 0x64 /* 7811: rng config */ +#define HIFN_1_7811_RNGDAT 0x68 /* 7811: rng data */ +#define HIFN_1_7811_RNGSTS 0x6c /* 7811: rng status */ +#define HIFN_1_7811_MIPSRST 0x94 /* 7811: MIPS reset */ +#define HIFN_1_REVID 0x98 /* Revision ID */ +#define HIFN_1_UNLOCK_SECRET1 0xf4 +#define HIFN_1_UNLOCK_SECRET2 0xfc +#define HIFN_1_PUB_RESET 0x204 /* Public/RNG Reset */ +#define HIFN_1_PUB_BASE 0x300 /* Public Base Address */ +#define HIFN_1_PUB_OPLEN 0x304 /* Public Operand Length */ +#define HIFN_1_PUB_OP 0x308 /* Public Operand */ +#define HIFN_1_PUB_STATUS 0x30c /* Public Status */ +#define HIFN_1_PUB_IEN 0x310 /* Public Interrupt enable */ +#define HIFN_1_RNG_CONFIG 0x314 /* RNG config */ +#define HIFN_1_RNG_DATA 0x318 /* RNG data */ +#define HIFN_1_PUB_MEM 0x400 /* start of Public key memory */ +#define HIFN_1_PUB_MEMEND 0xbff /* end of Public key memory */ + +/* DMA Status and Control Register (HIFN_1_DMA_CSR) */ +#define HIFN_DMACSR_D_CTRLMASK 0xc0000000 /* Destinition Ring Control */ +#define HIFN_DMACSR_D_CTRL_NOP 0x00000000 /* Dest. Control: no-op */ +#define HIFN_DMACSR_D_CTRL_DIS 0x40000000 /* Dest. Control: disable */ +#define HIFN_DMACSR_D_CTRL_ENA 0x80000000 /* Dest. Control: enable */ +#define HIFN_DMACSR_D_ABORT 0x20000000 /* Destinition Ring PCIAbort */ +#define HIFN_DMACSR_D_DONE 0x10000000 /* Destinition Ring Done */ +#define HIFN_DMACSR_D_LAST 0x08000000 /* Destinition Ring Last */ +#define HIFN_DMACSR_D_WAIT 0x04000000 /* Destinition Ring Waiting */ +#define HIFN_DMACSR_D_OVER 0x02000000 /* Destinition Ring Overflow */ +#define HIFN_DMACSR_R_CTRL 0x00c00000 /* Result Ring Control */ +#define HIFN_DMACSR_R_CTRL_NOP 0x00000000 /* Result Control: no-op */ +#define HIFN_DMACSR_R_CTRL_DIS 0x00400000 /* Result Control: disable */ +#define HIFN_DMACSR_R_CTRL_ENA 0x00800000 /* Result Control: enable */ +#define HIFN_DMACSR_R_ABORT 0x00200000 /* Result Ring PCI Abort */ +#define HIFN_DMACSR_R_DONE 0x00100000 /* Result Ring Done */ +#define HIFN_DMACSR_R_LAST 0x00080000 /* Result Ring Last */ +#define HIFN_DMACSR_R_WAIT 0x00040000 /* Result Ring Waiting */ +#define HIFN_DMACSR_R_OVER 0x00020000 /* Result Ring Overflow */ +#define HIFN_DMACSR_S_CTRL 0x0000c000 /* Source Ring Control */ +#define HIFN_DMACSR_S_CTRL_NOP 0x00000000 /* Source Control: no-op */ +#define HIFN_DMACSR_S_CTRL_DIS 0x00004000 /* Source Control: disable */ +#define HIFN_DMACSR_S_CTRL_ENA 0x00008000 /* Source Control: enable */ +#define HIFN_DMACSR_S_ABORT 0x00002000 /* Source Ring PCI Abort */ +#define HIFN_DMACSR_S_DONE 0x00001000 /* Source Ring Done */ +#define HIFN_DMACSR_S_LAST 0x00000800 /* Source Ring Last */ +#define HIFN_DMACSR_S_WAIT 0x00000400 /* Source Ring Waiting */ +#define HIFN_DMACSR_ILLW 0x00000200 /* Illegal write (7811 only) */ +#define HIFN_DMACSR_ILLR 0x00000100 /* Illegal read (7811 only) */ +#define HIFN_DMACSR_C_CTRL 0x000000c0 /* Command Ring Control */ +#define HIFN_DMACSR_C_CTRL_NOP 0x00000000 /* Command Control: no-op */ +#define HIFN_DMACSR_C_CTRL_DIS 0x00000040 /* Command Control: disable */ +#define HIFN_DMACSR_C_CTRL_ENA 0x00000080 /* Command Control: enable */ +#define HIFN_DMACSR_C_ABORT 0x00000020 /* Command Ring PCI Abort */ +#define HIFN_DMACSR_C_DONE 0x00000010 /* Command Ring Done */ +#define HIFN_DMACSR_C_LAST 0x00000008 /* Command Ring Last */ +#define HIFN_DMACSR_C_WAIT 0x00000004 /* Command Ring Waiting */ +#define HIFN_DMACSR_PUBDONE 0x00000002 /* Public op done (7951 only) */ +#define HIFN_DMACSR_ENGINE 0x00000001 /* Command Ring Engine IRQ */ + +/* DMA Interrupt Enable Register (HIFN_1_DMA_IER) */ +#define HIFN_DMAIER_D_ABORT 0x20000000 /* Destination Ring PCIAbort */ +#define HIFN_DMAIER_D_DONE 0x10000000 /* Destination Ring Done */ +#define HIFN_DMAIER_D_LAST 0x08000000 /* Destination Ring Last */ +#define HIFN_DMAIER_D_WAIT 0x04000000 /* Destination Ring Waiting */ +#define HIFN_DMAIER_D_OVER 0x02000000 /* Destination Ring Overflow */ +#define HIFN_DMAIER_R_ABORT 0x00200000 /* Result Ring PCI Abort */ +#define HIFN_DMAIER_R_DONE 0x00100000 /* Result Ring Done */ +#define HIFN_DMAIER_R_LAST 0x00080000 /* Result Ring Last */ +#define HIFN_DMAIER_R_WAIT 0x00040000 /* Result Ring Waiting */ +#define HIFN_DMAIER_R_OVER 0x00020000 /* Result Ring Overflow */ +#define HIFN_DMAIER_S_ABORT 0x00002000 /* Source Ring PCI Abort */ +#define HIFN_DMAIER_S_DONE 0x00001000 /* Source Ring Done */ +#define HIFN_DMAIER_S_LAST 0x00000800 /* Source Ring Last */ +#define HIFN_DMAIER_S_WAIT 0x00000400 /* Source Ring Waiting */ +#define HIFN_DMAIER_ILLW 0x00000200 /* Illegal write (7811 only) */ +#define HIFN_DMAIER_ILLR 0x00000100 /* Illegal read (7811 only) */ +#define HIFN_DMAIER_C_ABORT 0x00000020 /* Command Ring PCI Abort */ +#define HIFN_DMAIER_C_DONE 0x00000010 /* Command Ring Done */ +#define HIFN_DMAIER_C_LAST 0x00000008 /* Command Ring Last */ +#define HIFN_DMAIER_C_WAIT 0x00000004 /* Command Ring Waiting */ +#define HIFN_DMAIER_PUBDONE 0x00000002 /* public op done (7951 only) */ +#define HIFN_DMAIER_ENGINE 0x00000001 /* Engine IRQ */ + +/* DMA Configuration Register (HIFN_1_DMA_CNFG) */ +#define HIFN_DMACNFG_BIGENDIAN 0x10000000 /* big endian mode */ +#define HIFN_DMACNFG_POLLFREQ 0x00ff0000 /* Poll frequency mask */ +#define HIFN_DMACNFG_UNLOCK 0x00000800 +#define HIFN_DMACNFG_POLLINVAL 0x00000700 /* Invalid Poll Scalar */ +#define HIFN_DMACNFG_LAST 0x00000010 /* Host control LAST bit */ +#define HIFN_DMACNFG_MODE 0x00000004 /* DMA mode */ +#define HIFN_DMACNFG_DMARESET 0x00000002 /* DMA Reset # */ +#define HIFN_DMACNFG_MSTRESET 0x00000001 /* Master Reset # */ + +#define HIFN_PLL_7956 0x00001d18 /* 7956 PLL config value */ + +/* Public key reset register (HIFN_1_PUB_RESET) */ +#define HIFN_PUBRST_RESET 0x00000001 /* reset public/rng unit */ + +/* Public base address register (HIFN_1_PUB_BASE) */ +#define HIFN_PUBBASE_ADDR 0x00003fff /* base address */ + +/* Public operand length register (HIFN_1_PUB_OPLEN) */ +#define HIFN_PUBOPLEN_MOD_M 0x0000007f /* modulus length mask */ +#define HIFN_PUBOPLEN_MOD_S 0 /* modulus length shift */ +#define HIFN_PUBOPLEN_EXP_M 0x0003ff80 /* exponent length mask */ +#define HIFN_PUBOPLEN_EXP_S 7 /* exponent lenght shift */ +#define HIFN_PUBOPLEN_RED_M 0x003c0000 /* reducend length mask */ +#define HIFN_PUBOPLEN_RED_S 18 /* reducend length shift */ + +/* Public operation register (HIFN_1_PUB_OP) */ +#define HIFN_PUBOP_AOFFSET_M 0x0000007f /* A offset mask */ +#define HIFN_PUBOP_AOFFSET_S 0 /* A offset shift */ +#define HIFN_PUBOP_BOFFSET_M 0x00000f80 /* B offset mask */ +#define HIFN_PUBOP_BOFFSET_S 7 /* B offset shift */ +#define HIFN_PUBOP_MOFFSET_M 0x0003f000 /* M offset mask */ +#define HIFN_PUBOP_MOFFSET_S 12 /* M offset shift */ +#define HIFN_PUBOP_OP_MASK 0x003c0000 /* Opcode: */ +#define HIFN_PUBOP_OP_NOP 0x00000000 /* NOP */ +#define HIFN_PUBOP_OP_ADD 0x00040000 /* ADD */ +#define HIFN_PUBOP_OP_ADDC 0x00080000 /* ADD w/carry */ +#define HIFN_PUBOP_OP_SUB 0x000c0000 /* SUB */ +#define HIFN_PUBOP_OP_SUBC 0x00100000 /* SUB w/carry */ +#define HIFN_PUBOP_OP_MODADD 0x00140000 /* Modular ADD */ +#define HIFN_PUBOP_OP_MODSUB 0x00180000 /* Modular SUB */ +#define HIFN_PUBOP_OP_INCA 0x001c0000 /* INC A */ +#define HIFN_PUBOP_OP_DECA 0x00200000 /* DEC A */ +#define HIFN_PUBOP_OP_MULT 0x00240000 /* MULT */ +#define HIFN_PUBOP_OP_MODMULT 0x00280000 /* Modular MULT */ +#define HIFN_PUBOP_OP_MODRED 0x002c0000 /* Modular RED */ +#define HIFN_PUBOP_OP_MODEXP 0x00300000 /* Modular EXP */ + +/* Public status register (HIFN_1_PUB_STATUS) */ +#define HIFN_PUBSTS_DONE 0x00000001 /* operation done */ +#define HIFN_PUBSTS_CARRY 0x00000002 /* carry */ + +/* Public interrupt enable register (HIFN_1_PUB_IEN) */ +#define HIFN_PUBIEN_DONE 0x00000001 /* operation done interrupt */ + +/* Random number generator config register (HIFN_1_RNG_CONFIG) */ +#define HIFN_RNGCFG_ENA 0x00000001 /* enable rng */ + +#define HIFN_NAMESIZE 32 +#define HIFN_MAX_RESULT_ORDER 5 + +#define HIFN_D_CMD_RSIZE 24*4 +#define HIFN_D_SRC_RSIZE 80*4 +#define HIFN_D_DST_RSIZE 80*4 +#define HIFN_D_RES_RSIZE 24*4 + +#define HIFN_QUEUE_LENGTH HIFN_D_CMD_RSIZE-5 + +#define AES_MIN_KEY_SIZE 16 +#define AES_MAX_KEY_SIZE 32 + +#define HIFN_DES_KEY_LENGTH 8 +#define HIFN_3DES_KEY_LENGTH 24 +#define HIFN_MAX_CRYPT_KEY_LENGTH AES_MAX_KEY_SIZE +#define HIFN_IV_LENGTH 8 +#define HIFN_AES_IV_LENGTH 16 +#define HIFN_MAX_IV_LENGTH HIFN_AES_IV_LENGTH + +#define HIFN_MAC_KEY_LENGTH 64 +#define HIFN_MD5_LENGTH 16 +#define HIFN_SHA1_LENGTH 20 +#define HIFN_MAC_TRUNC_LENGTH 12 + +#define HIFN_MAX_COMMAND (8 + 8 + 8 + 64 + 260) +#define HIFN_MAX_RESULT (8 + 4 + 4 + 20 + 4) +#define HIFN_USED_RESULT 12 + +struct hifn_desc +{ + volatile u32 l; + volatile u32 p; +}; + +struct hifn_dma { + struct hifn_desc cmdr[HIFN_D_CMD_RSIZE+1]; + struct hifn_desc srcr[HIFN_D_SRC_RSIZE+1]; + struct hifn_desc dstr[HIFN_D_DST_RSIZE+1]; + struct hifn_desc resr[HIFN_D_RES_RSIZE+1]; + + u8 command_bufs[HIFN_D_CMD_RSIZE][HIFN_MAX_COMMAND]; + u8 result_bufs[HIFN_D_CMD_RSIZE][HIFN_MAX_RESULT]; + + u64 test_src, test_dst; + + /* + * Our current positions for insertion and removal from the descriptor + * rings. + */ + volatile int cmdi, srci, dsti, resi; + volatile int cmdu, srcu, dstu, resu; + int cmdk, srck, dstk, resk; +}; + +#define HIFN_FLAG_CMD_BUSY (1<<0) +#define HIFN_FLAG_SRC_BUSY (1<<1) +#define HIFN_FLAG_DST_BUSY (1<<2) +#define HIFN_FLAG_RES_BUSY (1<<3) +#define HIFN_FLAG_OLD_KEY (1<<4) + +#define HIFN_DEFAULT_ACTIVE_NUM 5 + +struct hifn_device +{ + char name[HIFN_NAMESIZE]; + + int irq; + + struct pci_dev *pdev; + void __iomem *bar[3]; + + unsigned long result_mem; + dma_addr_t dst; + + void *desc_virt; + dma_addr_t desc_dma; + + u32 dmareg; + + void *sa[HIFN_D_RES_RSIZE]; + + spinlock_t lock; + + void *priv; + + u32 flags; + int active, started; + struct delayed_work work; + unsigned long reset; + unsigned long success; + unsigned long prev_success; + + u8 snum; + + struct crypto_queue queue; + struct list_head alg_list; +}; + +#define HIFN_D_LENGTH 0x0000ffff +#define HIFN_D_NOINVALID 0x01000000 +#define HIFN_D_MASKDONEIRQ 0x02000000 +#define HIFN_D_DESTOVER 0x04000000 +#define HIFN_D_OVER 0x08000000 +#define HIFN_D_LAST 0x20000000 +#define HIFN_D_JUMP 0x40000000 +#define HIFN_D_VALID 0x80000000 + +struct hifn_base_command +{ + volatile u16 masks; + volatile u16 session_num; + volatile u16 total_source_count; + volatile u16 total_dest_count; +}; + +#define HIFN_BASE_CMD_COMP 0x0100 /* enable compression engine */ +#define HIFN_BASE_CMD_PAD 0x0200 /* enable padding engine */ +#define HIFN_BASE_CMD_MAC 0x0400 /* enable MAC engine */ +#define HIFN_BASE_CMD_CRYPT 0x0800 /* enable crypt engine */ +#define HIFN_BASE_CMD_DECODE 0x2000 +#define HIFN_BASE_CMD_SRCLEN_M 0xc000 +#define HIFN_BASE_CMD_SRCLEN_S 14 +#define HIFN_BASE_CMD_DSTLEN_M 0x3000 +#define HIFN_BASE_CMD_DSTLEN_S 12 +#define HIFN_BASE_CMD_LENMASK_HI 0x30000 +#define HIFN_BASE_CMD_LENMASK_LO 0x0ffff + +/* + * Structure to help build up the command data structure. + */ +struct hifn_crypt_command +{ + volatile u16 masks; + volatile u16 header_skip; + volatile u16 source_count; + volatile u16 reserved; +}; + +#define HIFN_CRYPT_CMD_ALG_MASK 0x0003 /* algorithm: */ +#define HIFN_CRYPT_CMD_ALG_DES 0x0000 /* DES */ +#define HIFN_CRYPT_CMD_ALG_3DES 0x0001 /* 3DES */ +#define HIFN_CRYPT_CMD_ALG_RC4 0x0002 /* RC4 */ +#define HIFN_CRYPT_CMD_ALG_AES 0x0003 /* AES */ +#define HIFN_CRYPT_CMD_MODE_MASK 0x0018 /* Encrypt mode: */ +#define HIFN_CRYPT_CMD_MODE_ECB 0x0000 /* ECB */ +#define HIFN_CRYPT_CMD_MODE_CBC 0x0008 /* CBC */ +#define HIFN_CRYPT_CMD_MODE_CFB 0x0010 /* CFB */ +#define HIFN_CRYPT_CMD_MODE_OFB 0x0018 /* OFB */ +#define HIFN_CRYPT_CMD_CLR_CTX 0x0040 /* clear context */ +#define HIFN_CRYPT_CMD_KSZ_MASK 0x0600 /* AES key size: */ +#define HIFN_CRYPT_CMD_KSZ_128 0x0000 /* 128 bit */ +#define HIFN_CRYPT_CMD_KSZ_192 0x0200 /* 192 bit */ +#define HIFN_CRYPT_CMD_KSZ_256 0x0400 /* 256 bit */ +#define HIFN_CRYPT_CMD_NEW_KEY 0x0800 /* expect new key */ +#define HIFN_CRYPT_CMD_NEW_IV 0x1000 /* expect new iv */ +#define HIFN_CRYPT_CMD_SRCLEN_M 0xc000 +#define HIFN_CRYPT_CMD_SRCLEN_S 14 + +/* + * Structure to help build up the command data structure. + */ +struct hifn_mac_command +{ + volatile u16 masks; + volatile u16 header_skip; + volatile u16 source_count; + volatile u16 reserved; +}; + +#define HIFN_MAC_CMD_ALG_MASK 0x0001 +#define HIFN_MAC_CMD_ALG_SHA1 0x0000 +#define HIFN_MAC_CMD_ALG_MD5 0x0001 +#define HIFN_MAC_CMD_MODE_MASK 0x000c +#define HIFN_MAC_CMD_MODE_HMAC 0x0000 +#define HIFN_MAC_CMD_MODE_SSL_MAC 0x0004 +#define HIFN_MAC_CMD_MODE_HASH 0x0008 +#define HIFN_MAC_CMD_MODE_FULL 0x0004 +#define HIFN_MAC_CMD_TRUNC 0x0010 +#define HIFN_MAC_CMD_RESULT 0x0020 +#define HIFN_MAC_CMD_APPEND 0x0040 +#define HIFN_MAC_CMD_SRCLEN_M 0xc000 +#define HIFN_MAC_CMD_SRCLEN_S 14 + +/* + * MAC POS IPsec initiates authentication after encryption on encodes + * and before decryption on decodes. + */ +#define HIFN_MAC_CMD_POS_IPSEC 0x0200 +#define HIFN_MAC_CMD_NEW_KEY 0x0800 + +struct hifn_comp_command +{ + volatile u16 masks; + volatile u16 header_skip; + volatile u16 source_count; + volatile u16 reserved; +}; + +#define HIFN_COMP_CMD_SRCLEN_M 0xc000 +#define HIFN_COMP_CMD_SRCLEN_S 14 +#define HIFN_COMP_CMD_ONE 0x0100 /* must be one */ +#define HIFN_COMP_CMD_CLEARHIST 0x0010 /* clear history */ +#define HIFN_COMP_CMD_UPDATEHIST 0x0008 /* update history */ +#define HIFN_COMP_CMD_LZS_STRIP0 0x0004 /* LZS: strip zero */ +#define HIFN_COMP_CMD_MPPC_RESTART 0x0004 /* MPPC: restart */ +#define HIFN_COMP_CMD_ALG_MASK 0x0001 /* compression mode: */ +#define HIFN_COMP_CMD_ALG_MPPC 0x0001 /* MPPC */ +#define HIFN_COMP_CMD_ALG_LZS 0x0000 /* LZS */ + +struct hifn_base_result +{ + volatile u16 flags; + volatile u16 session; + volatile u16 src_cnt; /* 15:0 of source count */ + volatile u16 dst_cnt; /* 15:0 of dest count */ +}; + +#define HIFN_BASE_RES_DSTOVERRUN 0x0200 /* destination overrun */ +#define HIFN_BASE_RES_SRCLEN_M 0xc000 /* 17:16 of source count */ +#define HIFN_BASE_RES_SRCLEN_S 14 +#define HIFN_BASE_RES_DSTLEN_M 0x3000 /* 17:16 of dest count */ +#define HIFN_BASE_RES_DSTLEN_S 12 + +struct hifn_comp_result +{ + volatile u16 flags; + volatile u16 crc; +}; + +#define HIFN_COMP_RES_LCB_M 0xff00 /* longitudinal check byte */ +#define HIFN_COMP_RES_LCB_S 8 +#define HIFN_COMP_RES_RESTART 0x0004 /* MPPC: restart */ +#define HIFN_COMP_RES_ENDMARKER 0x0002 /* LZS: end marker seen */ +#define HIFN_COMP_RES_SRC_NOTZERO 0x0001 /* source expired */ + +struct hifn_mac_result +{ + volatile u16 flags; + volatile u16 reserved; + /* followed by 0, 6, 8, or 10 u16's of the MAC, then crypt */ +}; + +#define HIFN_MAC_RES_MISCOMPARE 0x0002 /* compare failed */ +#define HIFN_MAC_RES_SRC_NOTZERO 0x0001 /* source expired */ + +struct hifn_crypt_result +{ + volatile u16 flags; + volatile u16 reserved; +}; + +#define HIFN_CRYPT_RES_SRC_NOTZERO 0x0001 /* source expired */ + +#ifndef HIFN_POLL_FREQUENCY +#define HIFN_POLL_FREQUENCY 0x1 +#endif + +#ifndef HIFN_POLL_SCALAR +#define HIFN_POLL_SCALAR 0x0 +#endif + +#define HIFN_MAX_SEGLEN 0xffff /* maximum dma segment len */ +#define HIFN_MAX_DMALEN 0x3ffff /* maximum dma length */ + +struct hifn_crypto_alg +{ + struct list_head entry; + struct crypto_alg alg; + struct hifn_device *dev; +}; + +#define ASYNC_SCATTERLIST_CACHE 16 + +#define ASYNC_FLAGS_MISALIGNED (1<<0) + +struct ablkcipher_walk +{ + struct scatterlist cache[ASYNC_SCATTERLIST_CACHE]; + u32 flags; + int num; +}; + +struct hifn_context +{ + u8 key[HIFN_MAX_CRYPT_KEY_LENGTH], *iv; + struct hifn_device *dev; + unsigned int keysize, ivsize; + u8 op, type, mode, unused; + struct ablkcipher_walk walk; + atomic_t sg_num; +}; + +#define crypto_alg_to_hifn(alg) container_of(alg, struct hifn_crypto_alg, alg) + +static inline u32 hifn_read_0(struct hifn_device *dev, u32 reg) +{ + u32 ret; + + ret = readl((char *)(dev->bar[0]) + reg); + + return ret; +} + +static inline u32 hifn_read_1(struct hifn_device *dev, u32 reg) +{ + u32 ret; + + ret = readl((char *)(dev->bar[1]) + reg); + + return ret; +} + +static inline void hifn_write_0(struct hifn_device *dev, u32 reg, u32 val) +{ + writel(val, (char *)(dev->bar[0]) + reg); +} + +static inline void hifn_write_1(struct hifn_device *dev, u32 reg, u32 val) +{ + writel(val, (char *)(dev->bar[1]) + reg); +} + +static void hifn_wait_puc(struct hifn_device *dev) +{ + int i; + u32 ret; + + for (i=10000; i > 0; --i) { + ret = hifn_read_0(dev, HIFN_0_PUCTRL); + if (!(ret & HIFN_PUCTRL_RESET)) + break; + + udelay(1); + } + + if (!i) + dprintk("%s: Failed to reset PUC unit.\n", dev->name); +} + +static void hifn_reset_puc(struct hifn_device *dev) +{ + hifn_write_0(dev, HIFN_0_PUCTRL, HIFN_PUCTRL_DMAENA); + hifn_wait_puc(dev); +} + +static void hifn_stop_device(struct hifn_device *dev) +{ + hifn_write_1(dev, HIFN_1_DMA_CSR, + HIFN_DMACSR_D_CTRL_DIS | HIFN_DMACSR_R_CTRL_DIS | + HIFN_DMACSR_S_CTRL_DIS | HIFN_DMACSR_C_CTRL_DIS); + hifn_write_0(dev, HIFN_0_PUIER, 0); + hifn_write_1(dev, HIFN_1_DMA_IER, 0); +} + +static void hifn_reset_dma(struct hifn_device *dev, int full) +{ + hifn_stop_device(dev); + + /* + * Setting poll frequency and others to 0. + */ + hifn_write_1(dev, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET | + HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE); + mdelay(1); + + /* + * Reset DMA. + */ + if (full) { + hifn_write_1(dev, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MODE); + mdelay(1); + } else { + hifn_write_1(dev, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MODE | + HIFN_DMACNFG_MSTRESET); + hifn_reset_puc(dev); + } + + hifn_write_1(dev, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET | + HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE); + + hifn_reset_puc(dev); +} + +static u32 hifn_next_signature(u_int32_t a, u_int cnt) +{ + int i; + u32 v; + + for (i = 0; i < cnt; i++) { + + /* get the parity */ + v = a & 0x80080125; + v ^= v >> 16; + v ^= v >> 8; + v ^= v >> 4; + v ^= v >> 2; + v ^= v >> 1; + + a = (v & 1) ^ (a << 1); + } + + return a; +} + +static struct pci2id { + u_short pci_vendor; + u_short pci_prod; + char card_id[13]; +} pci2id[] = { + { + PCI_VENDOR_ID_HIFN, + PCI_DEVICE_ID_HIFN_7955, + { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00 } + }, + { + PCI_VENDOR_ID_HIFN, + PCI_DEVICE_ID_HIFN_7956, + { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00 } + } +}; + +static int hifn_init_pubrng(struct hifn_device *dev) +{ + int i; + + hifn_write_1(dev, HIFN_1_PUB_RESET, hifn_read_1(dev, HIFN_1_PUB_RESET) | + HIFN_PUBRST_RESET); + + for (i=100; i > 0; --i) { + mdelay(1); + + if ((hifn_read_1(dev, HIFN_1_PUB_RESET) & HIFN_PUBRST_RESET) == 0) + break; + } + + if (!i) + dprintk("Chip %s: Failed to initialise public key engine.\n", + dev->name); + else { + hifn_write_1(dev, HIFN_1_PUB_IEN, HIFN_PUBIEN_DONE); + dev->dmareg |= HIFN_DMAIER_PUBDONE; + hifn_write_1(dev, HIFN_1_DMA_IER, dev->dmareg); + + dprintk("Chip %s: Public key engine has been sucessfully " + "initialised.\n", dev->name); + } + + /* + * Enable RNG engine. + */ + + hifn_write_1(dev, HIFN_1_RNG_CONFIG, + hifn_read_1(dev, HIFN_1_RNG_CONFIG) | HIFN_RNGCFG_ENA); + dprintk("Chip %s: RNG engine has been successfully initialised.\n", + dev->name); + + return 0; +} + +static int hifn_enable_crypto(struct hifn_device *dev) +{ + u32 dmacfg, addr; + char *offtbl = NULL; + int i; + + for (i = 0; i < sizeof(pci2id)/sizeof(pci2id[0]); i++) { + if (pci2id[i].pci_vendor == dev->pdev->vendor && + pci2id[i].pci_prod == dev->pdev->device) { + offtbl = pci2id[i].card_id; + break; + } + } + + if (offtbl == NULL) { + dprintk("Chip %s: Unknown card!\n", dev->name); + return -ENODEV; + } + + dmacfg = hifn_read_1(dev, HIFN_1_DMA_CNFG); + + hifn_write_1(dev, HIFN_1_DMA_CNFG, + HIFN_DMACNFG_UNLOCK | HIFN_DMACNFG_MSTRESET | + HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE); + mdelay(1); + addr = hifn_read_1(dev, HIFN_1_UNLOCK_SECRET1); + mdelay(1); + hifn_write_1(dev, HIFN_1_UNLOCK_SECRET2, 0); + mdelay(1); + + for (i=0; i<12; ++i) { + addr = hifn_next_signature(addr, offtbl[i] + 0x101); + hifn_write_1(dev, HIFN_1_UNLOCK_SECRET2, addr); + + mdelay(1); + } + hifn_write_1(dev, HIFN_1_DMA_CNFG, dmacfg); + + dprintk("Chip %s: %s.\n", dev->name, pci_name(dev->pdev)); + + return 0; +} + +static void hifn_init_dma(struct hifn_device *dev) +{ + struct hifn_dma *dma = (struct hifn_dma *)dev->desc_virt; + u32 dptr = dev->desc_dma; + int i; + + for (i=0; icmdr[i].p = __cpu_to_le32(dptr + + offsetof(struct hifn_dma, command_bufs[i][0])); + for (i=0; iresr[i].p = __cpu_to_le32(dptr + + offsetof(struct hifn_dma, result_bufs[i][0])); + + /* + * Setup LAST descriptors. + */ + dma->cmdr[HIFN_D_CMD_RSIZE].p = __cpu_to_le32(dptr + + offsetof(struct hifn_dma, cmdr[0])); + dma->srcr[HIFN_D_SRC_RSIZE].p = __cpu_to_le32(dptr + + offsetof(struct hifn_dma, srcr[0])); + dma->dstr[HIFN_D_DST_RSIZE].p = __cpu_to_le32(dptr + + offsetof(struct hifn_dma, dstr[0])); + dma->resr[HIFN_D_RES_RSIZE].p = __cpu_to_le32(dptr + + offsetof(struct hifn_dma, resr[0])); + + dma->cmdu = dma->srcu = dma->dstu = dma->resu = 0; + dma->cmdi = dma->srci = dma->dsti = dma->resi = 0; + dma->cmdk = dma->srck = dma->dstk = dma->resk = 0; +} + +static void hifn_init_registers(struct hifn_device *dev) +{ + u32 dptr = dev->desc_dma; + + /* Initialization magic... */ + hifn_write_0(dev, HIFN_0_PUCTRL, HIFN_PUCTRL_DMAENA); + hifn_write_0(dev, HIFN_0_FIFOCNFG, HIFN_FIFOCNFG_THRESHOLD); + hifn_write_0(dev, HIFN_0_PUIER, HIFN_PUIER_DSTOVER); + + /* write all 4 ring address registers */ + hifn_write_1(dev, HIFN_1_DMA_CRAR, __cpu_to_le32(dptr + + offsetof(struct hifn_dma, cmdr[0]))); + hifn_write_1(dev, HIFN_1_DMA_SRAR, __cpu_to_le32(dptr + + offsetof(struct hifn_dma, srcr[0]))); + hifn_write_1(dev, HIFN_1_DMA_DRAR, __cpu_to_le32(dptr + + offsetof(struct hifn_dma, dstr[0]))); + hifn_write_1(dev, HIFN_1_DMA_RRAR, __cpu_to_le32(dptr + + offsetof(struct hifn_dma, resr[0]))); + + mdelay(2); +#if 0 + hifn_write_1(dev, HIFN_1_DMA_CSR, + HIFN_DMACSR_D_CTRL_DIS | HIFN_DMACSR_R_CTRL_DIS | + HIFN_DMACSR_S_CTRL_DIS | HIFN_DMACSR_C_CTRL_DIS | + HIFN_DMACSR_D_ABORT | HIFN_DMACSR_D_DONE | HIFN_DMACSR_D_LAST | + HIFN_DMACSR_D_WAIT | HIFN_DMACSR_D_OVER | + HIFN_DMACSR_R_ABORT | HIFN_DMACSR_R_DONE | HIFN_DMACSR_R_LAST | + HIFN_DMACSR_R_WAIT | HIFN_DMACSR_R_OVER | + HIFN_DMACSR_S_ABORT | HIFN_DMACSR_S_DONE | HIFN_DMACSR_S_LAST | + HIFN_DMACSR_S_WAIT | + HIFN_DMACSR_C_ABORT | HIFN_DMACSR_C_DONE | HIFN_DMACSR_C_LAST | + HIFN_DMACSR_C_WAIT | + HIFN_DMACSR_ENGINE | + HIFN_DMACSR_PUBDONE); +#else + hifn_write_1(dev, HIFN_1_DMA_CSR, + HIFN_DMACSR_C_CTRL_ENA | HIFN_DMACSR_S_CTRL_ENA | + HIFN_DMACSR_D_CTRL_ENA | HIFN_DMACSR_R_CTRL_ENA | + HIFN_DMACSR_D_ABORT | HIFN_DMACSR_D_DONE | HIFN_DMACSR_D_LAST | + HIFN_DMACSR_D_WAIT | HIFN_DMACSR_D_OVER | + HIFN_DMACSR_R_ABORT | HIFN_DMACSR_R_DONE | HIFN_DMACSR_R_LAST | + HIFN_DMACSR_R_WAIT | HIFN_DMACSR_R_OVER | + HIFN_DMACSR_S_ABORT | HIFN_DMACSR_S_DONE | HIFN_DMACSR_S_LAST | + HIFN_DMACSR_S_WAIT | + HIFN_DMACSR_C_ABORT | HIFN_DMACSR_C_DONE | HIFN_DMACSR_C_LAST | + HIFN_DMACSR_C_WAIT | + HIFN_DMACSR_ENGINE | + HIFN_DMACSR_PUBDONE); +#endif + hifn_read_1(dev, HIFN_1_DMA_CSR); + + dev->dmareg |= HIFN_DMAIER_R_DONE | HIFN_DMAIER_C_ABORT | + HIFN_DMAIER_D_OVER | HIFN_DMAIER_R_OVER | + HIFN_DMAIER_S_ABORT | HIFN_DMAIER_D_ABORT | HIFN_DMAIER_R_ABORT | + HIFN_DMAIER_ENGINE; + dev->dmareg &= ~HIFN_DMAIER_C_WAIT; + + hifn_write_1(dev, HIFN_1_DMA_IER, dev->dmareg); + hifn_read_1(dev, HIFN_1_DMA_IER); +#if 0 + hifn_write_0(dev, HIFN_0_PUCNFG, HIFN_PUCNFG_ENCCNFG | + HIFN_PUCNFG_DRFR_128 | HIFN_PUCNFG_TCALLPHASES | + HIFN_PUCNFG_TCDRVTOTEM | HIFN_PUCNFG_BUS32 | + HIFN_PUCNFG_DRAM); +#else + hifn_write_0(dev, HIFN_0_PUCNFG, 0x10342); +#endif + hifn_write_1(dev, HIFN_1_PLL, HIFN_PLL_7956); + + hifn_write_0(dev, HIFN_0_PUISR, HIFN_PUISR_DSTOVER); + hifn_write_1(dev, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET | + HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE | HIFN_DMACNFG_LAST | + ((HIFN_POLL_FREQUENCY << 16 ) & HIFN_DMACNFG_POLLFREQ) | + ((HIFN_POLL_SCALAR << 8) & HIFN_DMACNFG_POLLINVAL)); +} + +static int hifn_setup_base_command(struct hifn_device *dev, u8 *buf, + unsigned dlen, unsigned slen, u16 mask, u8 snum) +{ + struct hifn_base_command *base_cmd; + u8 *buf_pos = buf; + + base_cmd = (struct hifn_base_command *)buf_pos; + base_cmd->masks = __cpu_to_le16(mask); + base_cmd->total_source_count = + __cpu_to_le16(slen & HIFN_BASE_CMD_LENMASK_LO); + base_cmd->total_dest_count = + __cpu_to_le16(dlen & HIFN_BASE_CMD_LENMASK_LO); + + dlen >>= 16; + slen >>= 16; + base_cmd->session_num = __cpu_to_le16(snum | + ((slen << HIFN_BASE_CMD_SRCLEN_S) & HIFN_BASE_CMD_SRCLEN_M) | + ((dlen << HIFN_BASE_CMD_DSTLEN_S) & HIFN_BASE_CMD_DSTLEN_M)); + + return sizeof(struct hifn_base_command); +} + +static int hifn_setup_crypto_command(struct hifn_device *dev, + u8 *buf, unsigned dlen, unsigned slen, + u8 *key, int keylen, u8 *iv, int ivsize, u16 mode) +{ + struct hifn_dma *dma = (struct hifn_dma *)dev->desc_virt; + struct hifn_crypt_command *cry_cmd; + u8 *buf_pos = buf; + u16 cmd_len; + + cry_cmd = (struct hifn_crypt_command *)buf_pos; + + cry_cmd->source_count = __cpu_to_le16(dlen & 0xffff); + dlen >>= 16; + cry_cmd->masks = __cpu_to_le16(mode | + ((dlen << HIFN_CRYPT_CMD_SRCLEN_S) & + HIFN_CRYPT_CMD_SRCLEN_M)); + cry_cmd->header_skip = 0; + cry_cmd->reserved = 0; + + buf_pos += sizeof(struct hifn_crypt_command); + + dma->cmdu++; + if (dma->cmdu > 1) { + dev->dmareg |= HIFN_DMAIER_C_WAIT; + hifn_write_1(dev, HIFN_1_DMA_IER, dev->dmareg); + } + + if (keylen) { + memcpy(buf_pos, key, keylen); + buf_pos += keylen; + } + if (ivsize) { + memcpy(buf_pos, iv, ivsize); + buf_pos += ivsize; + } + + cmd_len = buf_pos - buf; + + return cmd_len; +} + +static int hifn_setup_src_desc(struct hifn_device *dev, struct page *page, + unsigned int offset, unsigned int size) +{ + struct hifn_dma *dma = (struct hifn_dma *)dev->desc_virt; + int idx; + dma_addr_t addr; + + addr = pci_map_page(dev->pdev, page, offset, size, PCI_DMA_TODEVICE); + + idx = dma->srci; + + dma->srcr[idx].p = __cpu_to_le32(addr); + dma->srcr[idx].l = __cpu_to_le32(size) | HIFN_D_VALID | + HIFN_D_MASKDONEIRQ | HIFN_D_NOINVALID | HIFN_D_LAST; + + if (++idx == HIFN_D_SRC_RSIZE) { + dma->srcr[idx].l = __cpu_to_le32(HIFN_D_VALID | + HIFN_D_JUMP | + HIFN_D_MASKDONEIRQ | HIFN_D_LAST); + idx = 0; + } + + dma->srci = idx; + dma->srcu++; + + if (!(dev->flags & HIFN_FLAG_SRC_BUSY)) { + hifn_write_1(dev, HIFN_1_DMA_CSR, HIFN_DMACSR_S_CTRL_ENA); + dev->flags |= HIFN_FLAG_SRC_BUSY; + } + + return size; +} + +static void hifn_setup_res_desc(struct hifn_device *dev) +{ + struct hifn_dma *dma = (struct hifn_dma *)dev->desc_virt; + + dma->resr[dma->resi].l = __cpu_to_le32(HIFN_USED_RESULT | + HIFN_D_VALID | HIFN_D_LAST); + /* + * dma->resr[dma->resi].l = __cpu_to_le32(HIFN_MAX_RESULT | HIFN_D_VALID | + * HIFN_D_LAST | HIFN_D_NOINVALID); + */ + + if (++dma->resi == HIFN_D_RES_RSIZE) { + dma->resr[HIFN_D_RES_RSIZE].l = __cpu_to_le32(HIFN_D_VALID | + HIFN_D_JUMP | HIFN_D_MASKDONEIRQ | HIFN_D_LAST); + dma->resi = 0; + } + + dma->resu++; + + if (!(dev->flags & HIFN_FLAG_RES_BUSY)) { + hifn_write_1(dev, HIFN_1_DMA_CSR, HIFN_DMACSR_R_CTRL_ENA); + dev->flags |= HIFN_FLAG_RES_BUSY; + } +} + +static void hifn_setup_dst_desc(struct hifn_device *dev, struct page *page, + unsigned offset, unsigned size) +{ + struct hifn_dma *dma = (struct hifn_dma *)dev->desc_virt; + int idx; + dma_addr_t addr; + + addr = pci_map_page(dev->pdev, page, offset, size, PCI_DMA_FROMDEVICE); + + idx = dma->dsti; + dma->dstr[idx].p = __cpu_to_le32(addr); + dma->dstr[idx].l = __cpu_to_le32(size | HIFN_D_VALID | + HIFN_D_MASKDONEIRQ | HIFN_D_NOINVALID | HIFN_D_LAST); + + if (++idx == HIFN_D_DST_RSIZE) { + dma->dstr[idx].l = __cpu_to_le32(HIFN_D_VALID | + HIFN_D_JUMP | HIFN_D_MASKDONEIRQ | + HIFN_D_LAST | HIFN_D_NOINVALID); + idx = 0; + } + dma->dsti = idx; + dma->dstu++; + + if (!(dev->flags & HIFN_FLAG_DST_BUSY)) { + hifn_write_1(dev, HIFN_1_DMA_CSR, HIFN_DMACSR_D_CTRL_ENA); + dev->flags |= HIFN_FLAG_DST_BUSY; + } +} + +static int hifn_setup_dma(struct hifn_device *dev, struct page *spage, unsigned int soff, + struct page *dpage, unsigned int doff, unsigned int nbytes, void *priv, + struct hifn_context *ctx) +{ + struct hifn_dma *dma = (struct hifn_dma *)dev->desc_virt; + int cmd_len, sa_idx; + u8 *buf, *buf_pos; + u16 mask; + + dprintk("%s: spage: %p, soffset: %u, dpage: %p, doffset: %u, nbytes: %u, priv: %p, ctx: %p.\n", + dev->name, spage, soff, dpage, doff, nbytes, priv, ctx); + + sa_idx = dma->resi; + + hifn_setup_src_desc(dev, spage, soff, nbytes); + + buf_pos = buf = dma->command_bufs[dma->cmdi]; + + mask = 0; + switch (ctx->op) { + case ACRYPTO_OP_DECRYPT: + mask = HIFN_BASE_CMD_CRYPT | HIFN_BASE_CMD_DECODE; + break; + case ACRYPTO_OP_ENCRYPT: + mask = HIFN_BASE_CMD_CRYPT; + break; + case ACRYPTO_OP_HMAC: + mask = HIFN_BASE_CMD_MAC; + break; + default: + goto err_out; + } + + buf_pos += hifn_setup_base_command(dev, buf_pos, nbytes, + nbytes, mask, dev->snum); + + if (ctx->op == ACRYPTO_OP_ENCRYPT || ctx->op == ACRYPTO_OP_DECRYPT) { + u16 md = 0; + + if (ctx->keysize) + md |= HIFN_CRYPT_CMD_NEW_KEY; + if (ctx->iv && ctx->mode != ACRYPTO_MODE_ECB) + md |= HIFN_CRYPT_CMD_NEW_IV; + + switch (ctx->mode) { + case ACRYPTO_MODE_ECB: + md |= HIFN_CRYPT_CMD_MODE_ECB; + break; + case ACRYPTO_MODE_CBC: + md |= HIFN_CRYPT_CMD_MODE_CBC; + break; + case ACRYPTO_MODE_CFB: + md |= HIFN_CRYPT_CMD_MODE_CFB; + break; + case ACRYPTO_MODE_OFB: + md |= HIFN_CRYPT_CMD_MODE_OFB; + break; + default: + goto err_out; + } + + switch (ctx->type) { + case ACRYPTO_TYPE_AES_128: + if (ctx->keysize != 16) + goto err_out; + md |= HIFN_CRYPT_CMD_KSZ_128 | + HIFN_CRYPT_CMD_ALG_AES; + break; + case ACRYPTO_TYPE_AES_192: + if (ctx->keysize != 24) + goto err_out; + md |= HIFN_CRYPT_CMD_KSZ_192 | + HIFN_CRYPT_CMD_ALG_AES; + break; + case ACRYPTO_TYPE_AES_256: + if (ctx->keysize != 32) + goto err_out; + md |= HIFN_CRYPT_CMD_KSZ_256 | + HIFN_CRYPT_CMD_ALG_AES; + break; + case ACRYPTO_TYPE_3DES: + if (ctx->keysize != 24) + goto err_out; + md |= HIFN_CRYPT_CMD_ALG_3DES; + break; + case ACRYPTO_TYPE_DES: + if (ctx->keysize != 8) + goto err_out; + md |= HIFN_CRYPT_CMD_ALG_DES; + break; + default: + goto err_out; + } + + buf_pos += hifn_setup_crypto_command(dev, buf_pos, + nbytes, nbytes, ctx->key, ctx->keysize, + ctx->iv, ctx->ivsize, md); + } + + dev->sa[sa_idx] = priv; + + cmd_len = buf_pos - buf; + dma->cmdr[dma->cmdi].l = __cpu_to_le32(cmd_len | HIFN_D_VALID | + HIFN_D_LAST | HIFN_D_MASKDONEIRQ); + + if (++dma->cmdi == HIFN_D_CMD_RSIZE) { + dma->cmdr[dma->cmdi].l = __cpu_to_le32(HIFN_MAX_COMMAND | + HIFN_D_VALID | HIFN_D_LAST | + HIFN_D_MASKDONEIRQ | HIFN_D_JUMP); + dma->cmdi = 0; + } else + dma->cmdr[dma->cmdi-1].l |= __cpu_to_le32(HIFN_D_VALID); + + if (!(dev->flags & HIFN_FLAG_CMD_BUSY)) { + hifn_write_1(dev, HIFN_1_DMA_CSR, HIFN_DMACSR_C_CTRL_ENA); + dev->flags |= HIFN_FLAG_CMD_BUSY; + } + + hifn_setup_dst_desc(dev, dpage, doff, nbytes); + hifn_setup_res_desc(dev); + + return 0; + +err_out: + return -EINVAL; +} + +static int ablkcipher_walk_init(struct ablkcipher_walk *w, + int num, gfp_t gfp_flags) +{ + int i; + + num = min(ASYNC_SCATTERLIST_CACHE, num); + sg_init_table(w->cache, num); + + w->num = 0; + for (i=0; icache[i]; + + sg_set_page(s, page, PAGE_SIZE, 0); + w->num++; + } + + return i; +} + +static void ablkcipher_walk_exit(struct ablkcipher_walk *w) +{ + int i; + + for (i=0; inum; ++i) { + struct scatterlist *s = &w->cache[i]; + + __free_page(sg_page(s)); + + s->length = 0; + } + + w->num = 0; +} + +static int ablkcipher_add(void *daddr, unsigned int *drestp, struct scatterlist *src, + unsigned int size, unsigned int *nbytesp) +{ + unsigned int copy, drest = *drestp, nbytes = *nbytesp; + int idx = 0; + void *saddr; + + if (drest < size || size > nbytes) + return -EINVAL; + + while (size) { + copy = min(drest, src->length); + + saddr = kmap_atomic(sg_page(src), KM_SOFTIRQ1); + memcpy(daddr, saddr + src->offset, copy); + kunmap_atomic(saddr, KM_SOFTIRQ1); + + size -= copy; + drest -= copy; + nbytes -= copy; + daddr += copy; + + dprintk("%s: copy: %u, size: %u, drest: %u, nbytes: %u.\n", + __func__, copy, size, drest, nbytes); + + src++; + idx++; + } + + *nbytesp = nbytes; + *drestp = drest; + + return idx; +} + +static int ablkcipher_walk(struct ablkcipher_request *req, + struct ablkcipher_walk *w) +{ + unsigned blocksize = + crypto_ablkcipher_blocksize(crypto_ablkcipher_reqtfm(req)); + unsigned alignmask = + crypto_ablkcipher_alignmask(crypto_ablkcipher_reqtfm(req)); + struct scatterlist *src, *dst, *t; + void *daddr; + unsigned int nbytes = req->nbytes, offset, copy, diff; + int idx, tidx, err; + + tidx = idx = 0; + offset = 0; + while (nbytes) { + if (idx >= w->num && (w->flags & ASYNC_FLAGS_MISALIGNED)) + return -EINVAL; + + src = &req->src[idx]; + dst = &req->dst[idx]; + + dprintk("\n%s: slen: %u, dlen: %u, soff: %u, doff: %u, offset: %u, " + "blocksize: %u, nbytes: %u.\n", + __func__, src->length, dst->length, src->offset, + dst->offset, offset, blocksize, nbytes); + + if (src->length & (blocksize - 1) || + src->offset & (alignmask - 1) || + dst->length & (blocksize - 1) || + dst->offset & (alignmask - 1) || + offset) { + unsigned slen = src->length - offset; + unsigned dlen = PAGE_SIZE; + + t = &w->cache[idx]; + + daddr = kmap_atomic(sg_page(t), KM_SOFTIRQ0); + err = ablkcipher_add(daddr, &dlen, src, slen, &nbytes); + if (err < 0) + goto err_out_unmap; + + idx += err; + + copy = slen & ~(blocksize - 1); + diff = slen & (blocksize - 1); + + if (dlen < nbytes) { + /* + * Destination page does not have enough space + * to put there additional blocksized chunk, + * so we mark that page as containing only + * blocksize aligned chunks: + * t->length = (slen & ~(blocksize - 1)); + * and increase number of bytes to be processed + * in next chunk: + * nbytes += diff; + */ + nbytes += diff; + + /* + * Temporary of course... + * Kick author if you will catch this one. + */ + printk(KERN_ERR "%s: dlen: %u, nbytes: %u," + "slen: %u, offset: %u.\n", + __func__, dlen, nbytes, slen, offset); + printk(KERN_ERR "%s: please contact author to fix this " + "issue, generally you should not catch " + "this path under any condition but who " + "knows how did you use crypto code.\n" + "Thank you.\n", __func__); + BUG(); + } else { + copy += diff + nbytes; + + src = &req->src[idx]; + + err = ablkcipher_add(daddr + slen, &dlen, src, nbytes, &nbytes); + if (err < 0) + goto err_out_unmap; + + idx += err; + } + + t->length = copy; + t->offset = offset; + + kunmap_atomic(daddr, KM_SOFTIRQ0); + } else { + nbytes -= src->length; + idx++; + } + + tidx++; + } + + return tidx; + +err_out_unmap: + kunmap_atomic(daddr, KM_SOFTIRQ0); + return err; +} + +static int hifn_setup_session(struct ablkcipher_request *req) +{ + struct hifn_context *ctx = crypto_tfm_ctx(req->base.tfm); + struct hifn_device *dev = ctx->dev; + struct page *spage, *dpage; + unsigned long soff, doff, flags; + unsigned int nbytes = req->nbytes, idx = 0, len; + int err = -EINVAL, sg_num; + struct scatterlist *src, *dst, *t; + unsigned blocksize = + crypto_ablkcipher_blocksize(crypto_ablkcipher_reqtfm(req)); + unsigned alignmask = + crypto_ablkcipher_alignmask(crypto_ablkcipher_reqtfm(req)); + + if (ctx->iv && !ctx->ivsize && ctx->mode != ACRYPTO_MODE_ECB) + goto err_out_exit; + + ctx->walk.flags = 0; + + while (nbytes) { + src = &req->src[idx]; + dst = &req->dst[idx]; + + if (src->length & (blocksize - 1) || + src->offset & (alignmask - 1) || + dst->length & (blocksize - 1) || + dst->offset & (alignmask - 1)) { + ctx->walk.flags |= ASYNC_FLAGS_MISALIGNED; + } + + nbytes -= src->length; + idx++; + } + + if (ctx->walk.flags & ASYNC_FLAGS_MISALIGNED) { + err = ablkcipher_walk_init(&ctx->walk, idx, GFP_ATOMIC); + if (err < 0) + return err; + } + + nbytes = req->nbytes; + idx = 0; + + sg_num = ablkcipher_walk(req, &ctx->walk); + + atomic_set(&ctx->sg_num, sg_num); + + spin_lock_irqsave(&dev->lock, flags); + if (dev->started + sg_num > HIFN_QUEUE_LENGTH) { + err = -EAGAIN; + goto err_out; + } + + dev->snum++; + dev->started += sg_num; + + while (nbytes) { + src = &req->src[idx]; + dst = &req->dst[idx]; + t = &ctx->walk.cache[idx]; + + if (t->length) { + spage = dpage = sg_page(t); + soff = doff = 0; + len = t->length; + } else { + spage = sg_page(src); + soff = src->offset; + + dpage = sg_page(dst); + doff = dst->offset; + + len = dst->length; + } + + idx++; + + err = hifn_setup_dma(dev, spage, soff, dpage, doff, nbytes, + req, ctx); + if (err) + goto err_out; + + nbytes -= len; + } + + dev->active = HIFN_DEFAULT_ACTIVE_NUM; + spin_unlock_irqrestore(&dev->lock, flags); + + return 0; + +err_out: + spin_unlock_irqrestore(&dev->lock, flags); +err_out_exit: + if (err && printk_ratelimit()) + dprintk("%s: iv: %p [%d], key: %p [%d], mode: %u, op: %u, " + "type: %u, err: %d.\n", + dev->name, ctx->iv, ctx->ivsize, + ctx->key, ctx->keysize, + ctx->mode, ctx->op, ctx->type, err); + + return err; +} + +static int hifn_test(struct hifn_device *dev, int encdec, u8 snum) +{ + int n, err; + u8 src[16]; + struct hifn_context ctx; + u8 fips_aes_ecb_from_zero[16] = { + 0x66, 0xE9, 0x4B, 0xD4, + 0xEF, 0x8A, 0x2C, 0x3B, + 0x88, 0x4C, 0xFA, 0x59, + 0xCA, 0x34, 0x2B, 0x2E}; + + memset(src, 0, sizeof(src)); + memset(ctx.key, 0, sizeof(ctx.key)); + + ctx.dev = dev; + ctx.keysize = 16; + ctx.ivsize = 0; + ctx.iv = NULL; + ctx.op = (encdec)?ACRYPTO_OP_ENCRYPT:ACRYPTO_OP_DECRYPT; + ctx.mode = ACRYPTO_MODE_ECB; + ctx.type = ACRYPTO_TYPE_AES_128; + atomic_set(&ctx.sg_num, 1); + + err = hifn_setup_dma(dev, + virt_to_page(src), offset_in_page(src), + virt_to_page(src), offset_in_page(src), + sizeof(src), NULL, &ctx); + if (err) + goto err_out; + + msleep(200); + + dprintk("%s: decoded: ", dev->name); + for (n=0; nname); + for (n=0; nname); + return 0; + } + +err_out: + printk(KERN_INFO "%s: AES 128 ECB test has been failed.\n", dev->name); + return -1; +} + +static int hifn_start_device(struct hifn_device *dev) +{ + int err; + + hifn_reset_dma(dev, 1); + + err = hifn_enable_crypto(dev); + if (err) + return err; + + hifn_reset_puc(dev); + + hifn_init_dma(dev); + + hifn_init_registers(dev); + + hifn_init_pubrng(dev); + + return 0; +} + +static int ablkcipher_get(void *saddr, unsigned int *srestp, unsigned int offset, + struct scatterlist *dst, unsigned int size, unsigned int *nbytesp) +{ + unsigned int srest = *srestp, nbytes = *nbytesp, copy; + void *daddr; + int idx = 0; + + if (srest < size || size > nbytes) + return -EINVAL; + + while (size) { + + copy = min(dst->length, srest); + + daddr = kmap_atomic(sg_page(dst), KM_IRQ0); + memcpy(daddr + dst->offset + offset, saddr, copy); + kunmap_atomic(daddr, KM_IRQ0); + + nbytes -= copy; + size -= copy; + srest -= copy; + saddr += copy; + offset = 0; + + dprintk("%s: copy: %u, size: %u, srest: %u, nbytes: %u.\n", + __func__, copy, size, srest, nbytes); + + dst++; + idx++; + } + + *nbytesp = nbytes; + *srestp = srest; + + return idx; +} + +static void hifn_process_ready(struct ablkcipher_request *req, int error) +{ + struct hifn_context *ctx = crypto_tfm_ctx(req->base.tfm); + struct hifn_device *dev; + + dprintk("%s: req: %p, ctx: %p.\n", __func__, req, ctx); + + dev = ctx->dev; + dprintk("%s: req: %p, started: %d, sg_num: %d.\n", + __func__, req, dev->started, atomic_read(&ctx->sg_num)); + + if (--dev->started < 0) + BUG(); + + if (atomic_dec_and_test(&ctx->sg_num)) { + unsigned int nbytes = req->nbytes; + int idx = 0, err; + struct scatterlist *dst, *t; + void *saddr; + + if (ctx->walk.flags & ASYNC_FLAGS_MISALIGNED) { + while (nbytes) { + t = &ctx->walk.cache[idx]; + dst = &req->dst[idx]; + + dprintk("\n%s: sg_page(t): %p, t->length: %u, " + "sg_page(dst): %p, dst->length: %u, " + "nbytes: %u.\n", + __func__, sg_page(t), t->length, + sg_page(dst), dst->length, nbytes); + + if (!t->length) { + nbytes -= dst->length; + idx++; + continue; + } + + saddr = kmap_atomic(sg_page(t), KM_IRQ1); + + err = ablkcipher_get(saddr, &t->length, t->offset, + dst, nbytes, &nbytes); + if (err < 0) { + kunmap_atomic(saddr, KM_IRQ1); + break; + } + + idx += err; + kunmap_atomic(saddr, KM_IRQ1); + } + + ablkcipher_walk_exit(&ctx->walk); + } + + req->base.complete(&req->base, error); + } +} + +static void hifn_check_for_completion(struct hifn_device *dev, int error) +{ + int i; + struct hifn_dma *dma = (struct hifn_dma *)dev->desc_virt; + + for (i=0; iresr[i]; + + if (!(d->l & __cpu_to_le32(HIFN_D_VALID)) && dev->sa[i]) { + dev->success++; + dev->reset = 0; + hifn_process_ready(dev->sa[i], error); + dev->sa[i] = NULL; + } + + if (d->l & __cpu_to_le32(HIFN_D_DESTOVER | HIFN_D_OVER)) + if (printk_ratelimit()) + printk("%s: overflow detected [d: %u, o: %u] " + "at %d resr: l: %08x, p: %08x.\n", + dev->name, + !!(d->l & __cpu_to_le32(HIFN_D_DESTOVER)), + !!(d->l & __cpu_to_le32(HIFN_D_OVER)), + i, d->l, d->p); + } +} + +static void hifn_clear_rings(struct hifn_device *dev) +{ + struct hifn_dma *dma = (struct hifn_dma *)dev->desc_virt; + int i, u; + + dprintk("%s: ring cleanup 1: i: %d.%d.%d.%d, u: %d.%d.%d.%d, " + "k: %d.%d.%d.%d.\n", + dev->name, + dma->cmdi, dma->srci, dma->dsti, dma->resi, + dma->cmdu, dma->srcu, dma->dstu, dma->resu, + dma->cmdk, dma->srck, dma->dstk, dma->resk); + + i = dma->resk; u = dma->resu; + while (u != 0) { + if (dma->resr[i].l & __cpu_to_le32(HIFN_D_VALID)) + break; + + if (i != HIFN_D_RES_RSIZE) + u--; + + if (++i == (HIFN_D_RES_RSIZE + 1)) + i = 0; + } + dma->resk = i; dma->resu = u; + + i = dma->srck; u = dma->srcu; + while (u != 0) { + if (i == HIFN_D_SRC_RSIZE) + i = 0; + if (dma->srcr[i].l & __cpu_to_le32(HIFN_D_VALID)) + break; + i++, u--; + } + dma->srck = i; dma->srcu = u; + + i = dma->cmdk; u = dma->cmdu; + while (u != 0) { + if (dma->cmdr[i].l & __cpu_to_le32(HIFN_D_VALID)) + break; + if (i != HIFN_D_CMD_RSIZE) + u--; + if (++i == (HIFN_D_CMD_RSIZE + 1)) + i = 0; + } + dma->cmdk = i; dma->cmdu = u; + + i = dma->dstk; u = dma->dstu; + while (u != 0) { + if (i == HIFN_D_DST_RSIZE) + i = 0; + if (dma->dstr[i].l & __cpu_to_le32(HIFN_D_VALID)) + break; + i++, u--; + } + dma->dstk = i; dma->dstu = u; + + dprintk("%s: ring cleanup 2: i: %d.%d.%d.%d, u: %d.%d.%d.%d, " + "k: %d.%d.%d.%d.\n", + dev->name, + dma->cmdi, dma->srci, dma->dsti, dma->resi, + dma->cmdu, dma->srcu, dma->dstu, dma->resu, + dma->cmdk, dma->srck, dma->dstk, dma->resk); +} + +static void hifn_work(struct work_struct *work) +{ + struct delayed_work *dw = container_of(work, struct delayed_work, work); + struct hifn_device *dev = container_of(dw, struct hifn_device, work); + unsigned long flags; + int reset = 0; + u32 r = 0; + + spin_lock_irqsave(&dev->lock, flags); + if (dev->active == 0) { + struct hifn_dma *dma = (struct hifn_dma *)dev->desc_virt; + + if (dma->cmdu == 0 && (dev->flags & HIFN_FLAG_CMD_BUSY)) { + dev->flags &= ~HIFN_FLAG_CMD_BUSY; + r |= HIFN_DMACSR_C_CTRL_DIS; + } + if (dma->srcu == 0 && (dev->flags & HIFN_FLAG_SRC_BUSY)) { + dev->flags &= ~HIFN_FLAG_SRC_BUSY; + r |= HIFN_DMACSR_S_CTRL_DIS; + } + if (dma->dstu == 0 && (dev->flags & HIFN_FLAG_DST_BUSY)) { + dev->flags &= ~HIFN_FLAG_DST_BUSY; + r |= HIFN_DMACSR_D_CTRL_DIS; + } + if (dma->resu == 0 && (dev->flags & HIFN_FLAG_RES_BUSY)) { + dev->flags &= ~HIFN_FLAG_RES_BUSY; + r |= HIFN_DMACSR_R_CTRL_DIS; + } + if (r) + hifn_write_1(dev, HIFN_1_DMA_CSR, r); + } else + dev->active--; + + if (dev->prev_success == dev->success && dev->started) + reset = 1; + dev->prev_success = dev->success; + spin_unlock_irqrestore(&dev->lock, flags); + + if (reset) { + dprintk("%s: r: %08x, active: %d, started: %d, " + "success: %lu: reset: %d.\n", + dev->name, r, dev->active, dev->started, + dev->success, reset); + + if (++dev->reset >= 5) { + dprintk("%s: really hard reset.\n", dev->name); + hifn_reset_dma(dev, 1); + hifn_stop_device(dev); + hifn_start_device(dev); + dev->reset = 0; + } + + spin_lock_irqsave(&dev->lock, flags); + hifn_check_for_completion(dev, -EBUSY); + hifn_clear_rings(dev); + dev->started = 0; + spin_unlock_irqrestore(&dev->lock, flags); + } + + schedule_delayed_work(&dev->work, HZ); +} + +static irqreturn_t hifn_interrupt(int irq, void *data) +{ + struct hifn_device *dev = (struct hifn_device *)data; + struct hifn_dma *dma = (struct hifn_dma *)dev->desc_virt; + u32 dmacsr, restart; + + dmacsr = hifn_read_1(dev, HIFN_1_DMA_CSR); + + dprintk("%s: 1 dmacsr: %08x, dmareg: %08x, res: %08x [%d], " + "i: %d.%d.%d.%d, u: %d.%d.%d.%d.\n", + dev->name, dmacsr, dev->dmareg, dmacsr & dev->dmareg, dma->cmdi, + dma->cmdu, dma->srcu, dma->dstu, dma->resu, + dma->cmdi, dma->srci, dma->dsti, dma->resi); + + if ((dmacsr & dev->dmareg) == 0) + return IRQ_NONE; + + hifn_write_1(dev, HIFN_1_DMA_CSR, dmacsr & dev->dmareg); + + if (dmacsr & HIFN_DMACSR_ENGINE) + hifn_write_0(dev, HIFN_0_PUISR, hifn_read_0(dev, HIFN_0_PUISR)); + if (dmacsr & HIFN_DMACSR_PUBDONE) + hifn_write_1(dev, HIFN_1_PUB_STATUS, + hifn_read_1(dev, HIFN_1_PUB_STATUS) | HIFN_PUBSTS_DONE); + + restart = dmacsr & (HIFN_DMACSR_R_OVER | HIFN_DMACSR_D_OVER); + if (restart) { + u32 puisr = hifn_read_0(dev, HIFN_0_PUISR); + + if (printk_ratelimit()) + printk("%s: overflow: r: %d, d: %d, puisr: %08x, d: %u.\n", + dev->name, !!(dmacsr & HIFN_DMACSR_R_OVER), + !!(dmacsr & HIFN_DMACSR_D_OVER), + puisr, !!(puisr & HIFN_PUISR_DSTOVER)); + if (!!(puisr & HIFN_PUISR_DSTOVER)) + hifn_write_0(dev, HIFN_0_PUISR, HIFN_PUISR_DSTOVER); + hifn_write_1(dev, HIFN_1_DMA_CSR, dmacsr & (HIFN_DMACSR_R_OVER | + HIFN_DMACSR_D_OVER)); + } + + restart = dmacsr & (HIFN_DMACSR_C_ABORT | HIFN_DMACSR_S_ABORT | + HIFN_DMACSR_D_ABORT | HIFN_DMACSR_R_ABORT); + if (restart) { + if (printk_ratelimit()) + printk("%s: abort: c: %d, s: %d, d: %d, r: %d.\n", + dev->name, !!(dmacsr & HIFN_DMACSR_C_ABORT), + !!(dmacsr & HIFN_DMACSR_S_ABORT), + !!(dmacsr & HIFN_DMACSR_D_ABORT), + !!(dmacsr & HIFN_DMACSR_R_ABORT)); + hifn_reset_dma(dev, 1); + hifn_init_dma(dev); + hifn_init_registers(dev); + } + + if ((dmacsr & HIFN_DMACSR_C_WAIT) && (dma->cmdu == 0)) { + dprintk("%s: wait on command.\n", dev->name); + dev->dmareg &= ~(HIFN_DMAIER_C_WAIT); + hifn_write_1(dev, HIFN_1_DMA_IER, dev->dmareg); + } + + hifn_check_for_completion(dev, 0); + hifn_clear_rings(dev); + + return IRQ_HANDLED; +} + +static void hifn_flush(struct hifn_device *dev) +{ + unsigned long flags; + struct crypto_async_request *async_req; + struct hifn_context *ctx; + struct ablkcipher_request *req; + struct hifn_dma *dma = (struct hifn_dma *)dev->desc_virt; + int i; + + spin_lock_irqsave(&dev->lock, flags); + for (i=0; iresr[i]; + + if (dev->sa[i]) { + hifn_process_ready(dev->sa[i], + (d->l & __cpu_to_le32(HIFN_D_VALID))?-ENODEV:0); + } + } + + while ((async_req = crypto_dequeue_request(&dev->queue))) { + ctx = crypto_tfm_ctx(async_req->tfm); + req = container_of(async_req, struct ablkcipher_request, base); + + hifn_process_ready(req, -ENODEV); + } + spin_unlock_irqrestore(&dev->lock, flags); +} + +static int hifn_setkey(struct crypto_ablkcipher *cipher, const u8 *key, + unsigned int len) +{ + struct crypto_tfm *tfm = crypto_ablkcipher_tfm(cipher); + struct hifn_context *ctx = crypto_tfm_ctx(tfm); + struct hifn_device *dev = ctx->dev; + + if (len > HIFN_MAX_CRYPT_KEY_LENGTH) { + crypto_ablkcipher_set_flags(cipher, CRYPTO_TFM_RES_BAD_KEY_LEN); + return -1; + } + + dev->flags &= ~HIFN_FLAG_OLD_KEY; + + memcpy(ctx->key, key, len); + ctx->keysize = len; + + return 0; +} + +static int hifn_handle_req(struct ablkcipher_request *req) +{ + struct hifn_context *ctx = crypto_tfm_ctx(req->base.tfm); + struct hifn_device *dev = ctx->dev; + int err = -EAGAIN; + + if (dev->started + DIV_ROUND_UP(req->nbytes, PAGE_SIZE) <= HIFN_QUEUE_LENGTH) + err = hifn_setup_session(req); + + if (err == -EAGAIN) { + unsigned long flags; + + spin_lock_irqsave(&dev->lock, flags); + err = ablkcipher_enqueue_request(&dev->queue, req); + spin_unlock_irqrestore(&dev->lock, flags); + } + + return err; +} + +static int hifn_setup_crypto_req(struct ablkcipher_request *req, u8 op, + u8 type, u8 mode) +{ + struct hifn_context *ctx = crypto_tfm_ctx(req->base.tfm); + unsigned ivsize; + + ivsize = crypto_ablkcipher_ivsize(crypto_ablkcipher_reqtfm(req)); + + if (req->info && mode != ACRYPTO_MODE_ECB) { + if (type == ACRYPTO_TYPE_AES_128) + ivsize = HIFN_AES_IV_LENGTH; + else if (type == ACRYPTO_TYPE_DES) + ivsize = HIFN_DES_KEY_LENGTH; + else if (type == ACRYPTO_TYPE_3DES) + ivsize = HIFN_3DES_KEY_LENGTH; + } + + if (ctx->keysize != 16 && type == ACRYPTO_TYPE_AES_128) { + if (ctx->keysize == 24) + type = ACRYPTO_TYPE_AES_192; + else if (ctx->keysize == 32) + type = ACRYPTO_TYPE_AES_256; + } + + ctx->op = op; + ctx->mode = mode; + ctx->type = type; + ctx->iv = req->info; + ctx->ivsize = ivsize; + + /* + * HEAVY TODO: needs to kick Herbert XU to write documentation. + * HEAVY TODO: needs to kick Herbert XU to write documentation. + * HEAVY TODO: needs to kick Herbert XU to write documentation. + */ + + return hifn_handle_req(req); +} + +static int hifn_process_queue(struct hifn_device *dev) +{ + struct crypto_async_request *async_req; + struct hifn_context *ctx; + struct ablkcipher_request *req; + unsigned long flags; + int err = 0; + + while (dev->started < HIFN_QUEUE_LENGTH) { + spin_lock_irqsave(&dev->lock, flags); + async_req = crypto_dequeue_request(&dev->queue); + spin_unlock_irqrestore(&dev->lock, flags); + + if (!async_req) + break; + + ctx = crypto_tfm_ctx(async_req->tfm); + req = container_of(async_req, struct ablkcipher_request, base); + + err = hifn_handle_req(req); + if (err) + break; + } + + return err; +} + +static int hifn_setup_crypto(struct ablkcipher_request *req, u8 op, + u8 type, u8 mode) +{ + int err; + struct hifn_context *ctx = crypto_tfm_ctx(req->base.tfm); + struct hifn_device *dev = ctx->dev; + + err = hifn_setup_crypto_req(req, op, type, mode); + if (err) + return err; + + if (dev->started < HIFN_QUEUE_LENGTH && dev->queue.qlen) + err = hifn_process_queue(dev); + + return err; +} + +/* + * AES ecryption functions. + */ +static inline int hifn_encrypt_aes_ecb(struct ablkcipher_request *req) +{ + return hifn_setup_crypto(req, ACRYPTO_OP_ENCRYPT, + ACRYPTO_TYPE_AES_128, ACRYPTO_MODE_ECB); +} +static inline int hifn_encrypt_aes_cbc(struct ablkcipher_request *req) +{ + return hifn_setup_crypto(req, ACRYPTO_OP_ENCRYPT, + ACRYPTO_TYPE_AES_128, ACRYPTO_MODE_CBC); +} +static inline int hifn_encrypt_aes_cfb(struct ablkcipher_request *req) +{ + return hifn_setup_crypto(req, ACRYPTO_OP_ENCRYPT, + ACRYPTO_TYPE_AES_128, ACRYPTO_MODE_CFB); +} +static inline int hifn_encrypt_aes_ofb(struct ablkcipher_request *req) +{ + return hifn_setup_crypto(req, ACRYPTO_OP_ENCRYPT, + ACRYPTO_TYPE_AES_128, ACRYPTO_MODE_OFB); +} + +/* + * AES decryption functions. + */ +static inline int hifn_decrypt_aes_ecb(struct ablkcipher_request *req) +{ + return hifn_setup_crypto(req, ACRYPTO_OP_DECRYPT, + ACRYPTO_TYPE_AES_128, ACRYPTO_MODE_ECB); +} +static inline int hifn_decrypt_aes_cbc(struct ablkcipher_request *req) +{ + return hifn_setup_crypto(req, ACRYPTO_OP_DECRYPT, + ACRYPTO_TYPE_AES_128, ACRYPTO_MODE_CBC); +} +static inline int hifn_decrypt_aes_cfb(struct ablkcipher_request *req) +{ + return hifn_setup_crypto(req, ACRYPTO_OP_DECRYPT, + ACRYPTO_TYPE_AES_128, ACRYPTO_MODE_CFB); +} +static inline int hifn_decrypt_aes_ofb(struct ablkcipher_request *req) +{ + return hifn_setup_crypto(req, ACRYPTO_OP_DECRYPT, + ACRYPTO_TYPE_AES_128, ACRYPTO_MODE_OFB); +} + +/* + * DES ecryption functions. + */ +static inline int hifn_encrypt_des_ecb(struct ablkcipher_request *req) +{ + return hifn_setup_crypto(req, ACRYPTO_OP_ENCRYPT, + ACRYPTO_TYPE_DES, ACRYPTO_MODE_ECB); +} +static inline int hifn_encrypt_des_cbc(struct ablkcipher_request *req) +{ + return hifn_setup_crypto(req, ACRYPTO_OP_ENCRYPT, + ACRYPTO_TYPE_DES, ACRYPTO_MODE_CBC); +} +static inline int hifn_encrypt_des_cfb(struct ablkcipher_request *req) +{ + return hifn_setup_crypto(req, ACRYPTO_OP_ENCRYPT, + ACRYPTO_TYPE_DES, ACRYPTO_MODE_CFB); +} +static inline int hifn_encrypt_des_ofb(struct ablkcipher_request *req) +{ + return hifn_setup_crypto(req, ACRYPTO_OP_ENCRYPT, + ACRYPTO_TYPE_DES, ACRYPTO_MODE_OFB); +} + +/* + * DES decryption functions. + */ +static inline int hifn_decrypt_des_ecb(struct ablkcipher_request *req) +{ + return hifn_setup_crypto(req, ACRYPTO_OP_DECRYPT, + ACRYPTO_TYPE_DES, ACRYPTO_MODE_ECB); +} +static inline int hifn_decrypt_des_cbc(struct ablkcipher_request *req) +{ + return hifn_setup_crypto(req, ACRYPTO_OP_DECRYPT, + ACRYPTO_TYPE_DES, ACRYPTO_MODE_CBC); +} +static inline int hifn_decrypt_des_cfb(struct ablkcipher_request *req) +{ + return hifn_setup_crypto(req, ACRYPTO_OP_DECRYPT, + ACRYPTO_TYPE_DES, ACRYPTO_MODE_CFB); +} +static inline int hifn_decrypt_des_ofb(struct ablkcipher_request *req) +{ + return hifn_setup_crypto(req, ACRYPTO_OP_DECRYPT, + ACRYPTO_TYPE_DES, ACRYPTO_MODE_OFB); +} + +/* + * 3DES ecryption functions. + */ +static inline int hifn_encrypt_3des_ecb(struct ablkcipher_request *req) +{ + return hifn_setup_crypto(req, ACRYPTO_OP_ENCRYPT, + ACRYPTO_TYPE_3DES, ACRYPTO_MODE_ECB); +} +static inline int hifn_encrypt_3des_cbc(struct ablkcipher_request *req) +{ + return hifn_setup_crypto(req, ACRYPTO_OP_ENCRYPT, + ACRYPTO_TYPE_3DES, ACRYPTO_MODE_CBC); +} +static inline int hifn_encrypt_3des_cfb(struct ablkcipher_request *req) +{ + return hifn_setup_crypto(req, ACRYPTO_OP_ENCRYPT, + ACRYPTO_TYPE_3DES, ACRYPTO_MODE_CFB); +} +static inline int hifn_encrypt_3des_ofb(struct ablkcipher_request *req) +{ + return hifn_setup_crypto(req, ACRYPTO_OP_ENCRYPT, + ACRYPTO_TYPE_3DES, ACRYPTO_MODE_OFB); +} + +/* + * 3DES decryption functions. + */ +static inline int hifn_decrypt_3des_ecb(struct ablkcipher_request *req) +{ + return hifn_setup_crypto(req, ACRYPTO_OP_DECRYPT, + ACRYPTO_TYPE_3DES, ACRYPTO_MODE_ECB); +} +static inline int hifn_decrypt_3des_cbc(struct ablkcipher_request *req) +{ + return hifn_setup_crypto(req, ACRYPTO_OP_DECRYPT, + ACRYPTO_TYPE_3DES, ACRYPTO_MODE_CBC); +} +static inline int hifn_decrypt_3des_cfb(struct ablkcipher_request *req) +{ + return hifn_setup_crypto(req, ACRYPTO_OP_DECRYPT, + ACRYPTO_TYPE_3DES, ACRYPTO_MODE_CFB); +} +static inline int hifn_decrypt_3des_ofb(struct ablkcipher_request *req) +{ + return hifn_setup_crypto(req, ACRYPTO_OP_DECRYPT, + ACRYPTO_TYPE_3DES, ACRYPTO_MODE_OFB); +} + +struct hifn_alg_template +{ + char name[CRYPTO_MAX_ALG_NAME]; + char drv_name[CRYPTO_MAX_ALG_NAME]; + unsigned int bsize; + struct ablkcipher_alg ablkcipher; +}; + +static struct hifn_alg_template hifn_alg_templates[] = { + /* + * 3DES ECB, CBC, CFB and OFB modes. + */ + { + .name = "cfb(des3_ede)", .drv_name = "hifn-3des", .bsize = 8, + .ablkcipher = { + .min_keysize = HIFN_3DES_KEY_LENGTH, + .max_keysize = HIFN_3DES_KEY_LENGTH, + .setkey = hifn_setkey, + .encrypt = hifn_encrypt_3des_cfb, + .decrypt = hifn_decrypt_3des_cfb, + }, + }, + { + .name = "ofb(des3_ede)", .drv_name = "hifn-3des", .bsize = 8, + .ablkcipher = { + .min_keysize = HIFN_3DES_KEY_LENGTH, + .max_keysize = HIFN_3DES_KEY_LENGTH, + .setkey = hifn_setkey, + .encrypt = hifn_encrypt_3des_ofb, + .decrypt = hifn_decrypt_3des_ofb, + }, + }, + { + .name = "cbc(des3_ede)", .drv_name = "hifn-3des", .bsize = 8, + .ablkcipher = { + .min_keysize = HIFN_3DES_KEY_LENGTH, + .max_keysize = HIFN_3DES_KEY_LENGTH, + .setkey = hifn_setkey, + .encrypt = hifn_encrypt_3des_cbc, + .decrypt = hifn_decrypt_3des_cbc, + }, + }, + { + .name = "ecb(des3_ede)", .drv_name = "hifn-3des", .bsize = 8, + .ablkcipher = { + .min_keysize = HIFN_3DES_KEY_LENGTH, + .max_keysize = HIFN_3DES_KEY_LENGTH, + .setkey = hifn_setkey, + .encrypt = hifn_encrypt_3des_ecb, + .decrypt = hifn_decrypt_3des_ecb, + }, + }, + + /* + * DES ECB, CBC, CFB and OFB modes. + */ + { + .name = "cfb(des)", .drv_name = "hifn-des", .bsize = 8, + .ablkcipher = { + .min_keysize = HIFN_DES_KEY_LENGTH, + .max_keysize = HIFN_DES_KEY_LENGTH, + .setkey = hifn_setkey, + .encrypt = hifn_encrypt_des_cfb, + .decrypt = hifn_decrypt_des_cfb, + }, + }, + { + .name = "ofb(des)", .drv_name = "hifn-des", .bsize = 8, + .ablkcipher = { + .min_keysize = HIFN_DES_KEY_LENGTH, + .max_keysize = HIFN_DES_KEY_LENGTH, + .setkey = hifn_setkey, + .encrypt = hifn_encrypt_des_ofb, + .decrypt = hifn_decrypt_des_ofb, + }, + }, + { + .name = "cbc(des)", .drv_name = "hifn-des", .bsize = 8, + .ablkcipher = { + .min_keysize = HIFN_DES_KEY_LENGTH, + .max_keysize = HIFN_DES_KEY_LENGTH, + .setkey = hifn_setkey, + .encrypt = hifn_encrypt_des_cbc, + .decrypt = hifn_decrypt_des_cbc, + }, + }, + { + .name = "ecb(des)", .drv_name = "hifn-des", .bsize = 8, + .ablkcipher = { + .min_keysize = HIFN_DES_KEY_LENGTH, + .max_keysize = HIFN_DES_KEY_LENGTH, + .setkey = hifn_setkey, + .encrypt = hifn_encrypt_des_ecb, + .decrypt = hifn_decrypt_des_ecb, + }, + }, + + /* + * AES ECB, CBC, CFB and OFB modes. + */ + { + .name = "ecb(aes)", .drv_name = "hifn-aes", .bsize = 16, + .ablkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .setkey = hifn_setkey, + .encrypt = hifn_encrypt_aes_ecb, + .decrypt = hifn_decrypt_aes_ecb, + }, + }, + { + .name = "cbc(aes)", .drv_name = "hifn-aes", .bsize = 16, + .ablkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .setkey = hifn_setkey, + .encrypt = hifn_encrypt_aes_cbc, + .decrypt = hifn_decrypt_aes_cbc, + }, + }, + { + .name = "cfb(aes)", .drv_name = "hifn-aes", .bsize = 16, + .ablkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .setkey = hifn_setkey, + .encrypt = hifn_encrypt_aes_cfb, + .decrypt = hifn_decrypt_aes_cfb, + }, + }, + { + .name = "ofb(aes)", .drv_name = "hifn-aes", .bsize = 16, + .ablkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .setkey = hifn_setkey, + .encrypt = hifn_encrypt_aes_ofb, + .decrypt = hifn_decrypt_aes_ofb, + }, + }, +}; + +static int hifn_cra_init(struct crypto_tfm *tfm) +{ + struct crypto_alg *alg = tfm->__crt_alg; + struct hifn_crypto_alg *ha = crypto_alg_to_hifn(alg); + struct hifn_context *ctx = crypto_tfm_ctx(tfm); + + ctx->dev = ha->dev; + + return 0; +} + +static int hifn_alg_alloc(struct hifn_device *dev, struct hifn_alg_template *t) +{ + struct hifn_crypto_alg *alg; + int err; + + alg = kzalloc(sizeof(struct hifn_crypto_alg), GFP_KERNEL); + if (!alg) + return -ENOMEM; + + snprintf(alg->alg.cra_name, CRYPTO_MAX_ALG_NAME, "%s", t->name); + snprintf(alg->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME, "%s", t->drv_name); + + alg->alg.cra_priority = 300; + alg->alg.cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | CRYPTO_ALG_ASYNC; + alg->alg.cra_blocksize = t->bsize; + alg->alg.cra_ctxsize = sizeof(struct hifn_context); + alg->alg.cra_alignmask = 15; + if (t->bsize == 8) + alg->alg.cra_alignmask = 3; + alg->alg.cra_type = &crypto_ablkcipher_type; + alg->alg.cra_module = THIS_MODULE; + alg->alg.cra_u.ablkcipher = t->ablkcipher; + alg->alg.cra_init = hifn_cra_init; + + alg->dev = dev; + + list_add_tail(&alg->entry, &dev->alg_list); + + err = crypto_register_alg(&alg->alg); + if (err) { + list_del(&alg->entry); + kfree(alg); + } + + return err; +} + +static void hifn_unregister_alg(struct hifn_device *dev) +{ + struct hifn_crypto_alg *a, *n; + + list_for_each_entry_safe(a, n, &dev->alg_list, entry) { + list_del(&a->entry); + crypto_unregister_alg(&a->alg); + kfree(a); + } +} + +static int hifn_register_alg(struct hifn_device *dev) +{ + int i, err; + + for (i=0; ialg_list); + + snprintf(dev->name, sizeof(dev->name), "%s", name); + spin_lock_init(&dev->lock); + + for (i=0; i<3; ++i) { + unsigned long addr, size; + + addr = pci_resource_start(pdev, i); + size = pci_resource_len(pdev, i); + + dev->bar[i] = ioremap_nocache(addr, size); + if (!dev->bar[i]) + goto err_out_unmap_bars; + } + + dev->result_mem = __get_free_pages(GFP_KERNEL, HIFN_MAX_RESULT_ORDER); + if (!dev->result_mem) { + dprintk("Failed to allocate %d pages for result_mem.\n", + HIFN_MAX_RESULT_ORDER); + goto err_out_unmap_bars; + } + memset((void *)dev->result_mem, 0, PAGE_SIZE*(1<dst = pci_map_single(pdev, (void *)dev->result_mem, + PAGE_SIZE << HIFN_MAX_RESULT_ORDER, PCI_DMA_FROMDEVICE); + + dev->desc_virt = pci_alloc_consistent(pdev, sizeof(struct hifn_dma), + &dev->desc_dma); + if (!dev->desc_virt) { + dprintk("Failed to allocate descriptor rings.\n"); + goto err_out_free_result_pages; + } + memset(dev->desc_virt, 0, sizeof(struct hifn_dma)); + + dev->pdev = pdev; + dev->irq = pdev->irq; + + for (i=0; isa[i] = NULL; + + pci_set_drvdata(pdev, dev); + + crypto_init_queue(&dev->queue, 1); + + err = request_irq(dev->irq, hifn_interrupt, IRQF_SHARED, dev->name, dev); + if (err) { + dprintk("Failed to request IRQ%d: err: %d.\n", dev->irq, err); + dev->irq = 0; + goto err_out_free_desc; + } + + err = hifn_start_device(dev); + if (err) + goto err_out_free_irq; + + err = hifn_test(dev, 1, 0); + if (err) + goto err_out_stop_device; + + err = hifn_register_alg(dev); + if (err) + goto err_out_stop_device; + + INIT_DELAYED_WORK(&dev->work, hifn_work); + schedule_delayed_work(&dev->work, HZ); + + dprintk("HIFN crypto accelerator card at %s has been " + "successfully registered as %s.\n", + pci_name(pdev), dev->name); + + return 0; + +err_out_stop_device: + hifn_reset_dma(dev, 1); + hifn_stop_device(dev); +err_out_free_irq: + free_irq(dev->irq, dev->name); +err_out_free_desc: + pci_free_consistent(pdev, sizeof(struct hifn_dma), + dev->desc_virt, dev->desc_dma); + +err_out_free_result_pages: + pci_unmap_single(pdev, dev->dst, PAGE_SIZE << HIFN_MAX_RESULT_ORDER, + PCI_DMA_FROMDEVICE); + free_pages(dev->result_mem, HIFN_MAX_RESULT_ORDER); + +err_out_unmap_bars: + for (i=0; i<3; ++i) + if (dev->bar[i]) + iounmap(dev->bar[i]); + +err_out_free_regions: + pci_release_regions(pdev); + +err_out_disable_pci_device: + pci_disable_device(pdev); + + return err; +} + +static void hifn_remove(struct pci_dev *pdev) +{ + int i; + struct hifn_device *dev; + + dev = pci_get_drvdata(pdev); + + if (dev) { + cancel_delayed_work(&dev->work); + flush_scheduled_work(); + + hifn_unregister_alg(dev); + hifn_reset_dma(dev, 1); + hifn_stop_device(dev); + + free_irq(dev->irq, dev->name); + + hifn_flush(dev); + + pci_free_consistent(pdev, sizeof(struct hifn_dma), + dev->desc_virt, dev->desc_dma); + pci_unmap_single(pdev, dev->dst, + PAGE_SIZE << HIFN_MAX_RESULT_ORDER, + PCI_DMA_FROMDEVICE); + free_pages(dev->result_mem, HIFN_MAX_RESULT_ORDER); + for (i=0; i<3; ++i) + if (dev->bar[i]) + iounmap(dev->bar[i]); + + kfree(dev); + } + + pci_release_regions(pdev); + pci_disable_device(pdev); +} + +static struct pci_device_id hifn_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_HIFN, PCI_DEVICE_ID_HIFN_7955) }, + { PCI_DEVICE(PCI_VENDOR_ID_HIFN, PCI_DEVICE_ID_HIFN_7956) }, + { 0 } +}; +MODULE_DEVICE_TABLE(pci, hifn_pci_tbl); + +static struct pci_driver hifn_pci_driver = { + .name = "hifn795x", + .id_table = hifn_pci_tbl, + .probe = hifn_probe, + .remove = __devexit_p(hifn_remove), +}; + +static int __devinit hifn_init(void) +{ + int err; + + err = pci_register_driver(&hifn_pci_driver); + if (err < 0) { + dprintk("Failed to register PCI driver for %s device.\n", + hifn_pci_driver.name); + return -ENODEV; + } + + printk(KERN_INFO "Driver for HIFN 795x crypto accelerator chip " + "has been successfully registered.\n"); + + return 0; +} + +static void __devexit hifn_fini(void) +{ + pci_unregister_driver(&hifn_pci_driver); + + printk(KERN_INFO "Driver for HIFN 795x crypto accelerator chip " + "has been successfully unregistered.\n"); +} + +module_init(hifn_init); +module_exit(hifn_fini); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Evgeniy Polyakov "); +MODULE_DESCRIPTION("Driver for HIFN 795x crypto accelerator chip."); -- cgit v1.2.3-59-g8ed1b From 16d004a2eda7be2c6a2de63eca2ad3c6b57307b3 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Thu, 11 Oct 2007 19:48:58 +0800 Subject: [CRYPTO] des: Create header file for common macros This patch creates include/crypto/des.h for common macros shared between DES implementations. Signed-off-by: Evgeniy Polyakov Signed-off-by: Herbert Xu --- crypto/des_generic.c | 8 +------- include/crypto/des.h | 19 +++++++++++++++++++ 2 files changed, 20 insertions(+), 7 deletions(-) create mode 100644 include/crypto/des.h diff --git a/crypto/des_generic.c b/crypto/des_generic.c index 59966d14b8e0..f75eafe1a875 100644 --- a/crypto/des_generic.c +++ b/crypto/des_generic.c @@ -20,13 +20,7 @@ #include #include -#define DES_KEY_SIZE 8 -#define DES_EXPKEY_WORDS 32 -#define DES_BLOCK_SIZE 8 - -#define DES3_EDE_KEY_SIZE (3 * DES_KEY_SIZE) -#define DES3_EDE_EXPKEY_WORDS (3 * DES_EXPKEY_WORDS) -#define DES3_EDE_BLOCK_SIZE DES_BLOCK_SIZE +#include #define ROL(x, r) ((x) = rol32((x), (r))) #define ROR(x, r) ((x) = ror32((x), (r))) diff --git a/include/crypto/des.h b/include/crypto/des.h new file mode 100644 index 000000000000..2971c6304ade --- /dev/null +++ b/include/crypto/des.h @@ -0,0 +1,19 @@ +/* + * DES & Triple DES EDE Cipher Algorithms. + */ + +#ifndef __CRYPTO_DES_H +#define __CRYPTO_DES_H + +#define DES_KEY_SIZE 8 +#define DES_EXPKEY_WORDS 32 +#define DES_BLOCK_SIZE 8 + +#define DES3_EDE_KEY_SIZE (3 * DES_KEY_SIZE) +#define DES3_EDE_EXPKEY_WORDS (3 * DES_EXPKEY_WORDS) +#define DES3_EDE_BLOCK_SIZE DES_BLOCK_SIZE + + +extern unsigned long des_ekey(u32 *pe, const u8 *k); + +#endif /* __CRYPTO_DES_H */ -- cgit v1.2.3-59-g8ed1b From c3041f9c93e31159f4e321abea7c1549d271e6a7 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Thu, 11 Oct 2007 19:58:16 +0800 Subject: [CRYPTO] hifn_795x: Detect weak keys HIFN driver update to use DES weak key checks (exported in this patch). Signed-off-by: Evgeniy Polyakov Signed-off-by: Herbert Xu --- crypto/des_generic.c | 9 +++++---- drivers/crypto/Kconfig | 2 +- drivers/crypto/hifn_795x.c | 11 +++++++++++ 3 files changed, 17 insertions(+), 5 deletions(-) diff --git a/crypto/des_generic.c b/crypto/des_generic.c index f75eafe1a875..355ecb71cb0d 100644 --- a/crypto/des_generic.c +++ b/crypto/des_generic.c @@ -628,7 +628,7 @@ static const u32 S8[64] = { * Choice 1 has operated on the key. * */ -static unsigned long ekey(u32 *pe, const u8 *k) +unsigned long des_ekey(u32 *pe, const u8 *k) { /* K&R: long is at least 32 bits */ unsigned long a, b, c, d, w; @@ -703,6 +703,7 @@ static unsigned long ekey(u32 *pe, const u8 *k) /* Zero if weak key */ return w; } +EXPORT_SYMBOL_GPL(des_ekey); /* * Decryption key expansion @@ -786,7 +787,7 @@ static int des_setkey(struct crypto_tfm *tfm, const u8 *key, int ret; /* Expand to tmp */ - ret = ekey(tmp, key); + ret = des_ekey(tmp, key); if (unlikely(ret == 0) && (*flags & CRYPTO_TFM_REQ_WEAK_KEY)) { *flags |= CRYPTO_TFM_RES_WEAK_KEY; @@ -873,9 +874,9 @@ static int des3_ede_setkey(struct crypto_tfm *tfm, const u8 *key, return -EINVAL; } - ekey(expkey, key); expkey += DES_EXPKEY_WORDS; key += DES_KEY_SIZE; + des_ekey(expkey, key); expkey += DES_EXPKEY_WORDS; key += DES_KEY_SIZE; dkey(expkey, key); expkey += DES_EXPKEY_WORDS; key += DES_KEY_SIZE; - ekey(expkey, key); + des_ekey(expkey, key); return 0; } diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig index 1ef7697fc998..c2de1351819f 100644 --- a/drivers/crypto/Kconfig +++ b/drivers/crypto/Kconfig @@ -85,9 +85,9 @@ config ZCRYPT_MONOLITHIC config CRYPTO_DEV_HIFN_795X tristate "Driver HIFN 795x crypto accelerator chips" + select CRYPTO_DES select CRYPTO_ALGAPI select CRYPTO_ABLKCIPHER - select CRYPTO_BLKCIPHER help This option allows you to have support for HIFN 795x crypto adapters. diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c index e3376f2236b2..391c20a3dff8 100644 --- a/drivers/crypto/hifn_795x.c +++ b/drivers/crypto/hifn_795x.c @@ -29,6 +29,7 @@ #include #include +#include #include @@ -1924,6 +1925,16 @@ static int hifn_setkey(struct crypto_ablkcipher *cipher, const u8 *key, return -1; } + if (len == HIFN_DES_KEY_LENGTH) { + u32 tmp[DES_EXPKEY_WORDS]; + int ret = des_ekey(tmp, key); + + if (unlikely(ret == 0) && (tfm->crt_flags & CRYPTO_TFM_REQ_WEAK_KEY)) { + tfm->crt_flags |= CRYPTO_TFM_RES_WEAK_KEY; + return -EINVAL; + } + } + dev->flags &= ~HIFN_FLAG_OLD_KEY; memcpy(ctx->key, key, len); -- cgit v1.2.3-59-g8ed1b From f1901f1fc710ec0fc482a7c98ee4552874139f39 Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Mon, 15 Oct 2007 22:09:47 +0800 Subject: [CRYPTO] geode: remove alias alias isn't required because the module provides PCI ids. Signed-off-by: Sebastian Siewior Signed-off-by: Herbert Xu --- drivers/crypto/geode-aes.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/crypto/geode-aes.c b/drivers/crypto/geode-aes.c index 711e246e1ef0..fa4c9904346f 100644 --- a/drivers/crypto/geode-aes.c +++ b/drivers/crypto/geode-aes.c @@ -472,7 +472,6 @@ geode_aes_exit(void) MODULE_AUTHOR("Advanced Micro Devices, Inc."); MODULE_DESCRIPTION("Geode LX Hardware AES driver"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("aes"); module_init(geode_aes_init); module_exit(geode_aes_exit); -- cgit v1.2.3-59-g8ed1b From 89e12654312dddbbdbf17b5adc95b22cb672f947 Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Wed, 17 Oct 2007 23:18:57 +0800 Subject: [CRYPTO] aes: Move common defines into a header file This three defines are used in all AES related hardware. Signed-off-by: Sebastian Siewior Signed-off-by: Herbert Xu --- arch/s390/crypto/aes_s390.c | 7 +------ arch/x86/crypto/aes_32.c | 4 +--- arch/x86/crypto/aes_64.c | 6 +----- crypto/aes_generic.c | 6 +----- drivers/crypto/geode-aes.c | 1 + drivers/crypto/padlock-aes.c | 4 +--- include/crypto/aes.h | 15 +++++++++++++++ 7 files changed, 21 insertions(+), 22 deletions(-) create mode 100644 include/crypto/aes.h diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c index 512669691ad0..812511bbb540 100644 --- a/arch/s390/crypto/aes_s390.c +++ b/arch/s390/crypto/aes_s390.c @@ -16,17 +16,12 @@ * */ +#include #include #include #include #include "crypt_s390.h" -#define AES_MIN_KEY_SIZE 16 -#define AES_MAX_KEY_SIZE 32 - -/* data block size for all key lengths */ -#define AES_BLOCK_SIZE 16 - #define AES_KEYLEN_128 1 #define AES_KEYLEN_192 2 #define AES_KEYLEN_256 4 diff --git a/arch/x86/crypto/aes_32.c b/arch/x86/crypto/aes_32.c index 49aad9397f10..9b0ab50394b0 100644 --- a/arch/x86/crypto/aes_32.c +++ b/arch/x86/crypto/aes_32.c @@ -38,6 +38,7 @@ */ #include +#include #include #include #include @@ -48,9 +49,6 @@ asmlinkage void aes_enc_blk(struct crypto_tfm *tfm, u8 *dst, const u8 *src); asmlinkage void aes_dec_blk(struct crypto_tfm *tfm, u8 *dst, const u8 *src); -#define AES_MIN_KEY_SIZE 16 -#define AES_MAX_KEY_SIZE 32 -#define AES_BLOCK_SIZE 16 #define AES_KS_LENGTH 4 * AES_BLOCK_SIZE #define RC_LENGTH 29 diff --git a/arch/x86/crypto/aes_64.c b/arch/x86/crypto/aes_64.c index 5cdb13ea5cc2..0b38a4cd2ce1 100644 --- a/arch/x86/crypto/aes_64.c +++ b/arch/x86/crypto/aes_64.c @@ -54,6 +54,7 @@ */ #include +#include #include #include #include @@ -61,11 +62,6 @@ #include #include -#define AES_MIN_KEY_SIZE 16 -#define AES_MAX_KEY_SIZE 32 - -#define AES_BLOCK_SIZE 16 - /* * #define byte(x, nr) ((unsigned char)((x) >> (nr*8))) */ diff --git a/crypto/aes_generic.c b/crypto/aes_generic.c index 9401dca85e87..6683260475f9 100644 --- a/crypto/aes_generic.c +++ b/crypto/aes_generic.c @@ -52,6 +52,7 @@ s/RIJNDAEL(d_key)/D_KEY/g */ +#include #include #include #include @@ -59,11 +60,6 @@ #include #include -#define AES_MIN_KEY_SIZE 16 -#define AES_MAX_KEY_SIZE 32 - -#define AES_BLOCK_SIZE 16 - /* * #define byte(x, nr) ((unsigned char)((x) >> (nr*8))) */ diff --git a/drivers/crypto/geode-aes.c b/drivers/crypto/geode-aes.c index fa4c9904346f..5008a1cddffb 100644 --- a/drivers/crypto/geode-aes.c +++ b/drivers/crypto/geode-aes.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c index 5f7e71810489..c33334ac987e 100644 --- a/drivers/crypto/padlock-aes.c +++ b/drivers/crypto/padlock-aes.c @@ -44,6 +44,7 @@ */ #include +#include #include #include #include @@ -53,9 +54,6 @@ #include #include "padlock.h" -#define AES_MIN_KEY_SIZE 16 /* in uint8_t units */ -#define AES_MAX_KEY_SIZE 32 /* ditto */ -#define AES_BLOCK_SIZE 16 /* ditto */ #define AES_EXTENDED_KEY_SIZE 64 /* in uint32_t units */ #define AES_EXTENDED_KEY_SIZE_B (AES_EXTENDED_KEY_SIZE * sizeof(uint32_t)) diff --git a/include/crypto/aes.h b/include/crypto/aes.h new file mode 100644 index 000000000000..9ff842fc6b89 --- /dev/null +++ b/include/crypto/aes.h @@ -0,0 +1,15 @@ +/* + * Common values for AES algorithms + */ + +#ifndef _CRYPTO_AES_H +#define _CRYPTO_AES_H + +#define AES_MIN_KEY_SIZE 16 +#define AES_MAX_KEY_SIZE 32 +#define AES_KEYSIZE_128 16 +#define AES_KEYSIZE_192 24 +#define AES_KEYSIZE_256 32 +#define AES_BLOCK_SIZE 16 + +#endif -- cgit v1.2.3-59-g8ed1b From 2d506d4fa1df18aa9505820722f834426edc907f Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Sun, 21 Oct 2007 16:04:23 +0800 Subject: [CRYPTO] geode: use consistent IV copy It is enough if the IV is copied before and after the while loop. With DM-Crypt is seems not be required to save the IV after encrytion because a new one is used in the request (dunno about other users). It is not save to load the IV within while loop and not save afterwards because we mill end up with the wrong IV if the request goes consists of more than one page. Signed-off-by: Sebastian Siewior Signed-off-by: Herbert Xu --- drivers/crypto/geode-aes.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/crypto/geode-aes.c b/drivers/crypto/geode-aes.c index 5008a1cddffb..6c04f1363e6d 100644 --- a/drivers/crypto/geode-aes.c +++ b/drivers/crypto/geode-aes.c @@ -226,6 +226,7 @@ geode_cbc_decrypt(struct blkcipher_desc *desc, blkcipher_walk_init(&walk, dst, src, nbytes); err = blkcipher_walk_virt(desc, &walk); + memcpy(op->iv, walk.iv, AES_IV_LENGTH); while((nbytes = walk.nbytes)) { op->src = walk.src.virt.addr, @@ -234,16 +235,13 @@ geode_cbc_decrypt(struct blkcipher_desc *desc, op->len = nbytes - (nbytes % AES_MIN_BLOCK_SIZE); op->dir = AES_DIR_DECRYPT; - memcpy(op->iv, walk.iv, AES_IV_LENGTH); - ret = geode_aes_crypt(op); - memcpy(walk.iv, op->iv, AES_IV_LENGTH); nbytes -= ret; - err = blkcipher_walk_done(desc, &walk, nbytes); } + memcpy(walk.iv, op->iv, AES_IV_LENGTH); return err; } @@ -258,6 +256,7 @@ geode_cbc_encrypt(struct blkcipher_desc *desc, blkcipher_walk_init(&walk, dst, src, nbytes); err = blkcipher_walk_virt(desc, &walk); + memcpy(op->iv, walk.iv, AES_IV_LENGTH); while((nbytes = walk.nbytes)) { op->src = walk.src.virt.addr, @@ -266,13 +265,12 @@ geode_cbc_encrypt(struct blkcipher_desc *desc, op->len = nbytes - (nbytes % AES_MIN_BLOCK_SIZE); op->dir = AES_DIR_ENCRYPT; - memcpy(op->iv, walk.iv, AES_IV_LENGTH); - ret = geode_aes_crypt(op); nbytes -= ret; err = blkcipher_walk_done(desc, &walk, nbytes); } + memcpy(walk.iv, op->iv, AES_IV_LENGTH); return err; } -- cgit v1.2.3-59-g8ed1b From 1f4e4773761d0aa622411469b54d6570005a66b1 Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Sun, 21 Oct 2007 16:18:12 +0800 Subject: [CRYPTO] geode: relax in busy loop and care about return value The code waits in a busy loop until the hardware finishes the encryption or decryption process. This wants a cpu_relax() :) The busy loop finishes either if the encryption is done or if the counter is zero. If the latter is true than the hardware failed. Since this should not happen, leave sith a BUG(). Signed-off-by: Sebastian Siewior Signed-off-by: Herbert Xu --- drivers/crypto/geode-aes.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/crypto/geode-aes.c b/drivers/crypto/geode-aes.c index 6c04f1363e6d..6c6a31b979be 100644 --- a/drivers/crypto/geode-aes.c +++ b/drivers/crypto/geode-aes.c @@ -88,9 +88,10 @@ do_crypt(void *src, void *dst, int len, u32 flags) /* Start the operation */ iowrite32(AES_CTRL_START | flags, _iobase + AES_CTRLA_REG); - do + do { status = ioread32(_iobase + AES_INTR_REG); - while(!(status & AES_INTRA_PENDING) && --counter); + cpu_relax(); + } while(!(status & AES_INTRA_PENDING) && --counter); /* Clear the event */ iowrite32((status & 0xFF) | AES_INTRA_PENDING, _iobase + AES_INTR_REG); @@ -102,6 +103,7 @@ geode_aes_crypt(struct geode_aes_op *op) { u32 flags = 0; unsigned long iflags; + int ret; if (op->len == 0) return 0; @@ -130,7 +132,8 @@ geode_aes_crypt(struct geode_aes_op *op) _writefield(AES_WRITEKEY0_REG, op->key); } - do_crypt(op->src, op->dst, op->len, flags); + ret = do_crypt(op->src, op->dst, op->len, flags); + BUG_ON(ret); if (op->mode == AES_MODE_CBC) _readfield(AES_WRITEIV0_REG, op->iv); -- cgit v1.2.3-59-g8ed1b From b7a30da61adc5f252ee97b2a4f3fc23c9d06a08a Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Sun, 21 Oct 2007 16:21:25 +0800 Subject: [CRYPTO] geode: move defines into a headerfile This patch moves macros in geode-aes.c into geode-aes.h. Signed-off-by: Sebastian Siewior Signed-off-by: Herbert Xu --- drivers/crypto/geode-aes.c | 32 -------------------------------- drivers/crypto/geode-aes.h | 36 ++++++++++++++++++++++++++++++++++-- 2 files changed, 34 insertions(+), 34 deletions(-) diff --git a/drivers/crypto/geode-aes.c b/drivers/crypto/geode-aes.c index 6c6a31b979be..181d42c2deed 100644 --- a/drivers/crypto/geode-aes.c +++ b/drivers/crypto/geode-aes.c @@ -20,38 +20,6 @@ #include "geode-aes.h" -/* Register definitions */ - -#define AES_CTRLA_REG 0x0000 - -#define AES_CTRL_START 0x01 -#define AES_CTRL_DECRYPT 0x00 -#define AES_CTRL_ENCRYPT 0x02 -#define AES_CTRL_WRKEY 0x04 -#define AES_CTRL_DCA 0x08 -#define AES_CTRL_SCA 0x10 -#define AES_CTRL_CBC 0x20 - -#define AES_INTR_REG 0x0008 - -#define AES_INTRA_PENDING (1 << 16) -#define AES_INTRB_PENDING (1 << 17) - -#define AES_INTR_PENDING (AES_INTRA_PENDING | AES_INTRB_PENDING) -#define AES_INTR_MASK 0x07 - -#define AES_SOURCEA_REG 0x0010 -#define AES_DSTA_REG 0x0014 -#define AES_LENA_REG 0x0018 -#define AES_WRITEKEY0_REG 0x0030 -#define AES_WRITEIV0_REG 0x0040 - -/* A very large counter that is used to gracefully bail out of an - * operation in case of trouble - */ - -#define AES_OP_TIMEOUT 0x50000 - /* Static structures */ static void __iomem * _iobase; diff --git a/drivers/crypto/geode-aes.h b/drivers/crypto/geode-aes.h index f47968671ae7..2f1d55982aac 100644 --- a/drivers/crypto/geode-aes.h +++ b/drivers/crypto/geode-aes.h @@ -9,9 +9,9 @@ #ifndef _GEODE_AES_H_ #define _GEODE_AES_H_ -#define AES_KEY_LENGTH 16 +/* driver logic flags */ #define AES_IV_LENGTH 16 - +#define AES_KEY_LENGTH 16 #define AES_MIN_BLOCK_SIZE 16 #define AES_MODE_ECB 0 @@ -22,6 +22,38 @@ #define AES_FLAGS_HIDDENKEY (1 << 0) +/* Register definitions */ + +#define AES_CTRLA_REG 0x0000 + +#define AES_CTRL_START 0x01 +#define AES_CTRL_DECRYPT 0x00 +#define AES_CTRL_ENCRYPT 0x02 +#define AES_CTRL_WRKEY 0x04 +#define AES_CTRL_DCA 0x08 +#define AES_CTRL_SCA 0x10 +#define AES_CTRL_CBC 0x20 + +#define AES_INTR_REG 0x0008 + +#define AES_INTRA_PENDING (1 << 16) +#define AES_INTRB_PENDING (1 << 17) + +#define AES_INTR_PENDING (AES_INTRA_PENDING | AES_INTRB_PENDING) +#define AES_INTR_MASK 0x07 + +#define AES_SOURCEA_REG 0x0010 +#define AES_DSTA_REG 0x0014 +#define AES_LENA_REG 0x0018 +#define AES_WRITEKEY0_REG 0x0030 +#define AES_WRITEIV0_REG 0x0040 + +/* A very large counter that is used to gracefully bail out of an + * operation in case of trouble + */ + +#define AES_OP_TIMEOUT 0x50000 + struct geode_aes_op { void *src; -- cgit v1.2.3-59-g8ed1b From e2b21b5002a2bf21ca73c7448309a7288a984ddf Mon Sep 17 00:00:00 2001 From: Denys Vlasenko Date: Fri, 26 Oct 2007 16:22:57 +0800 Subject: [CRYPTO] twofish: Do not unroll big stuff in twofish key setup Currently twofish cipher key setup code has unrolled loops - approximately 70-100 instructions are repeated 40 times. As a result, twofish module is the biggest module in crypto/*. Unrolling produces x2.5 more code (+18k on i386), and speeds up key setup by 7%: unrolled: twofish_setkey/sec: 41128 loop: twofish_setkey/sec: 38148 CALC_K256: ~100 insns each CALC_K192: ~90 insns CALC_K: ~70 insns Attached patch removes this unrolling. $ size */twofish_common.o text data bss dec hex filename 37920 0 0 37920 9420 crypto.org/twofish_common.o 13209 0 0 13209 3399 crypto/twofish_common.o Run tested (modprobe tcrypt reports ok). Please apply. Signed-off-by: Denys Vlasenko Signed-off-by: Herbert Xu --- crypto/twofish_common.c | 96 ++++++++++++++++--------------------------------- 1 file changed, 30 insertions(+), 66 deletions(-) diff --git a/crypto/twofish_common.c b/crypto/twofish_common.c index b4b9c0c3f4ae..0af216c75d7e 100644 --- a/crypto/twofish_common.c +++ b/crypto/twofish_common.c @@ -655,84 +655,48 @@ int twofish_setkey(struct crypto_tfm *tfm, const u8 *key, unsigned int key_len) CALC_SB256_2( i, calc_sb_tbl[j], calc_sb_tbl[k] ); } - /* Calculate whitening and round subkeys. The constants are - * indices of subkeys, preprocessed through q0 and q1. */ - CALC_K256 (w, 0, 0xA9, 0x75, 0x67, 0xF3); - CALC_K256 (w, 2, 0xB3, 0xC6, 0xE8, 0xF4); - CALC_K256 (w, 4, 0x04, 0xDB, 0xFD, 0x7B); - CALC_K256 (w, 6, 0xA3, 0xFB, 0x76, 0xC8); - CALC_K256 (k, 0, 0x9A, 0x4A, 0x92, 0xD3); - CALC_K256 (k, 2, 0x80, 0xE6, 0x78, 0x6B); - CALC_K256 (k, 4, 0xE4, 0x45, 0xDD, 0x7D); - CALC_K256 (k, 6, 0xD1, 0xE8, 0x38, 0x4B); - CALC_K256 (k, 8, 0x0D, 0xD6, 0xC6, 0x32); - CALC_K256 (k, 10, 0x35, 0xD8, 0x98, 0xFD); - CALC_K256 (k, 12, 0x18, 0x37, 0xF7, 0x71); - CALC_K256 (k, 14, 0xEC, 0xF1, 0x6C, 0xE1); - CALC_K256 (k, 16, 0x43, 0x30, 0x75, 0x0F); - CALC_K256 (k, 18, 0x37, 0xF8, 0x26, 0x1B); - CALC_K256 (k, 20, 0xFA, 0x87, 0x13, 0xFA); - CALC_K256 (k, 22, 0x94, 0x06, 0x48, 0x3F); - CALC_K256 (k, 24, 0xF2, 0x5E, 0xD0, 0xBA); - CALC_K256 (k, 26, 0x8B, 0xAE, 0x30, 0x5B); - CALC_K256 (k, 28, 0x84, 0x8A, 0x54, 0x00); - CALC_K256 (k, 30, 0xDF, 0xBC, 0x23, 0x9D); + /* CALC_K256/CALC_K192/CALC_K loops were unrolled. + * Unrolling produced x2.5 more code (+18k on i386), + * and speeded up key setup by 7%: + * unrolled: twofish_setkey/sec: 41128 + * loop: twofish_setkey/sec: 38148 + * CALC_K256: ~100 insns each + * CALC_K192: ~90 insns + * CALC_K: ~70 insns + */ + /* Calculate whitening and round subkeys */ + for ( i = 0; i < 8; i += 2 ) { + CALC_K256 (w, i, q0[i], q1[i], q0[i+1], q1[i+1]); + } + for ( i = 0; i < 32; i += 2 ) { + CALC_K256 (k, i, q0[i+8], q1[i+8], q0[i+9], q1[i+9]); + } } else if (key_len == 24) { /* 192-bit key */ /* Compute the S-boxes. */ for ( i = j = 0, k = 1; i < 256; i++, j += 2, k += 2 ) { CALC_SB192_2( i, calc_sb_tbl[j], calc_sb_tbl[k] ); } - /* Calculate whitening and round subkeys. The constants are - * indices of subkeys, preprocessed through q0 and q1. */ - CALC_K192 (w, 0, 0xA9, 0x75, 0x67, 0xF3); - CALC_K192 (w, 2, 0xB3, 0xC6, 0xE8, 0xF4); - CALC_K192 (w, 4, 0x04, 0xDB, 0xFD, 0x7B); - CALC_K192 (w, 6, 0xA3, 0xFB, 0x76, 0xC8); - CALC_K192 (k, 0, 0x9A, 0x4A, 0x92, 0xD3); - CALC_K192 (k, 2, 0x80, 0xE6, 0x78, 0x6B); - CALC_K192 (k, 4, 0xE4, 0x45, 0xDD, 0x7D); - CALC_K192 (k, 6, 0xD1, 0xE8, 0x38, 0x4B); - CALC_K192 (k, 8, 0x0D, 0xD6, 0xC6, 0x32); - CALC_K192 (k, 10, 0x35, 0xD8, 0x98, 0xFD); - CALC_K192 (k, 12, 0x18, 0x37, 0xF7, 0x71); - CALC_K192 (k, 14, 0xEC, 0xF1, 0x6C, 0xE1); - CALC_K192 (k, 16, 0x43, 0x30, 0x75, 0x0F); - CALC_K192 (k, 18, 0x37, 0xF8, 0x26, 0x1B); - CALC_K192 (k, 20, 0xFA, 0x87, 0x13, 0xFA); - CALC_K192 (k, 22, 0x94, 0x06, 0x48, 0x3F); - CALC_K192 (k, 24, 0xF2, 0x5E, 0xD0, 0xBA); - CALC_K192 (k, 26, 0x8B, 0xAE, 0x30, 0x5B); - CALC_K192 (k, 28, 0x84, 0x8A, 0x54, 0x00); - CALC_K192 (k, 30, 0xDF, 0xBC, 0x23, 0x9D); + /* Calculate whitening and round subkeys */ + for ( i = 0; i < 8; i += 2 ) { + CALC_K192 (w, i, q0[i], q1[i], q0[i+1], q1[i+1]); + } + for ( i = 0; i < 32; i += 2 ) { + CALC_K192 (k, i, q0[i+8], q1[i+8], q0[i+9], q1[i+9]); + } } else { /* 128-bit key */ /* Compute the S-boxes. */ for ( i = j = 0, k = 1; i < 256; i++, j += 2, k += 2 ) { CALC_SB_2( i, calc_sb_tbl[j], calc_sb_tbl[k] ); } - /* Calculate whitening and round subkeys. The constants are - * indices of subkeys, preprocessed through q0 and q1. */ - CALC_K (w, 0, 0xA9, 0x75, 0x67, 0xF3); - CALC_K (w, 2, 0xB3, 0xC6, 0xE8, 0xF4); - CALC_K (w, 4, 0x04, 0xDB, 0xFD, 0x7B); - CALC_K (w, 6, 0xA3, 0xFB, 0x76, 0xC8); - CALC_K (k, 0, 0x9A, 0x4A, 0x92, 0xD3); - CALC_K (k, 2, 0x80, 0xE6, 0x78, 0x6B); - CALC_K (k, 4, 0xE4, 0x45, 0xDD, 0x7D); - CALC_K (k, 6, 0xD1, 0xE8, 0x38, 0x4B); - CALC_K (k, 8, 0x0D, 0xD6, 0xC6, 0x32); - CALC_K (k, 10, 0x35, 0xD8, 0x98, 0xFD); - CALC_K (k, 12, 0x18, 0x37, 0xF7, 0x71); - CALC_K (k, 14, 0xEC, 0xF1, 0x6C, 0xE1); - CALC_K (k, 16, 0x43, 0x30, 0x75, 0x0F); - CALC_K (k, 18, 0x37, 0xF8, 0x26, 0x1B); - CALC_K (k, 20, 0xFA, 0x87, 0x13, 0xFA); - CALC_K (k, 22, 0x94, 0x06, 0x48, 0x3F); - CALC_K (k, 24, 0xF2, 0x5E, 0xD0, 0xBA); - CALC_K (k, 26, 0x8B, 0xAE, 0x30, 0x5B); - CALC_K (k, 28, 0x84, 0x8A, 0x54, 0x00); - CALC_K (k, 30, 0xDF, 0xBC, 0x23, 0x9D); + /* Calculate whitening and round subkeys */ + for ( i = 0; i < 8; i += 2 ) { + CALC_K (w, i, q0[i], q1[i], q0[i+1], q1[i+1]); + } + for ( i = 0; i < 32; i += 2 ) { + CALC_K (k, i, q0[i+8], q1[i+8], q0[i+9], q1[i+9]); + } } return 0; -- cgit v1.2.3-59-g8ed1b From 1721a81256ed7f7bfdd1a721f3a6c9c85efeac53 Mon Sep 17 00:00:00 2001 From: Denys Vlasenko Date: Tue, 6 Nov 2007 22:01:20 +0800 Subject: [CRYPTO] camellia: Code cleanup Move code blocks around so that related pieces are closer together: e.g. CAMELLIA_ROUNDSM macro does not need to be separated from the rest of the code by huge array of constants. Remove unused macros (COPY4WORD, SWAP4WORD, XOR4WORD[2]) Drop SUBL(), SUBR() macros which only obscure things. Same for CAMELLIA_SP1110() macro and KEY_TABLE_TYPE typedef. Remove useless comments: /* encryption */ -- well it's obvious enough already! void camellia_encrypt128(...) Combine swap with copying at the beginning/end of encrypt/decrypt. Signed-off-by: Denys Vlasenko Acked-by: Noriaki TAKAMIYA Signed-off-by: Herbert Xu --- crypto/camellia.c | 966 ++++++++++++++++++++++++------------------------------ 1 file changed, 426 insertions(+), 540 deletions(-) diff --git a/crypto/camellia.c b/crypto/camellia.c index 6877ecfd90bb..aaae60e8bf25 100644 --- a/crypto/camellia.c +++ b/crypto/camellia.c @@ -36,176 +36,6 @@ #include #include - -#define CAMELLIA_MIN_KEY_SIZE 16 -#define CAMELLIA_MAX_KEY_SIZE 32 -#define CAMELLIA_BLOCK_SIZE 16 -#define CAMELLIA_TABLE_BYTE_LEN 272 -#define CAMELLIA_TABLE_WORD_LEN (CAMELLIA_TABLE_BYTE_LEN / 4) - -typedef u32 KEY_TABLE_TYPE[CAMELLIA_TABLE_WORD_LEN]; - - -/* key constants */ - -#define CAMELLIA_SIGMA1L (0xA09E667FL) -#define CAMELLIA_SIGMA1R (0x3BCC908BL) -#define CAMELLIA_SIGMA2L (0xB67AE858L) -#define CAMELLIA_SIGMA2R (0x4CAA73B2L) -#define CAMELLIA_SIGMA3L (0xC6EF372FL) -#define CAMELLIA_SIGMA3R (0xE94F82BEL) -#define CAMELLIA_SIGMA4L (0x54FF53A5L) -#define CAMELLIA_SIGMA4R (0xF1D36F1CL) -#define CAMELLIA_SIGMA5L (0x10E527FAL) -#define CAMELLIA_SIGMA5R (0xDE682D1DL) -#define CAMELLIA_SIGMA6L (0xB05688C2L) -#define CAMELLIA_SIGMA6R (0xB3E6C1FDL) - -struct camellia_ctx { - int key_length; - KEY_TABLE_TYPE key_table; -}; - - -/* - * macros - */ - - -# define GETU32(pt) (((u32)(pt)[0] << 24) \ - ^ ((u32)(pt)[1] << 16) \ - ^ ((u32)(pt)[2] << 8) \ - ^ ((u32)(pt)[3])) - -#define COPY4WORD(dst, src) \ - do { \ - (dst)[0]=(src)[0]; \ - (dst)[1]=(src)[1]; \ - (dst)[2]=(src)[2]; \ - (dst)[3]=(src)[3]; \ - }while(0) - -#define SWAP4WORD(word) \ - do { \ - CAMELLIA_SWAP4((word)[0]); \ - CAMELLIA_SWAP4((word)[1]); \ - CAMELLIA_SWAP4((word)[2]); \ - CAMELLIA_SWAP4((word)[3]); \ - }while(0) - -#define XOR4WORD(a, b)/* a = a ^ b */ \ - do { \ - (a)[0]^=(b)[0]; \ - (a)[1]^=(b)[1]; \ - (a)[2]^=(b)[2]; \ - (a)[3]^=(b)[3]; \ - }while(0) - -#define XOR4WORD2(a, b, c)/* a = b ^ c */ \ - do { \ - (a)[0]=(b)[0]^(c)[0]; \ - (a)[1]=(b)[1]^(c)[1]; \ - (a)[2]=(b)[2]^(c)[2]; \ - (a)[3]=(b)[3]^(c)[3]; \ - }while(0) - -#define CAMELLIA_SUBKEY_L(INDEX) (subkey[(INDEX)*2]) -#define CAMELLIA_SUBKEY_R(INDEX) (subkey[(INDEX)*2 + 1]) - -/* rotation right shift 1byte */ -#define CAMELLIA_RR8(x) (((x) >> 8) + ((x) << 24)) -/* rotation left shift 1bit */ -#define CAMELLIA_RL1(x) (((x) << 1) + ((x) >> 31)) -/* rotation left shift 1byte */ -#define CAMELLIA_RL8(x) (((x) << 8) + ((x) >> 24)) - -#define CAMELLIA_ROLDQ(ll, lr, rl, rr, w0, w1, bits) \ - do { \ - w0 = ll; \ - ll = (ll << bits) + (lr >> (32 - bits)); \ - lr = (lr << bits) + (rl >> (32 - bits)); \ - rl = (rl << bits) + (rr >> (32 - bits)); \ - rr = (rr << bits) + (w0 >> (32 - bits)); \ - } while(0) - -#define CAMELLIA_ROLDQo32(ll, lr, rl, rr, w0, w1, bits) \ - do { \ - w0 = ll; \ - w1 = lr; \ - ll = (lr << (bits - 32)) + (rl >> (64 - bits)); \ - lr = (rl << (bits - 32)) + (rr >> (64 - bits)); \ - rl = (rr << (bits - 32)) + (w0 >> (64 - bits)); \ - rr = (w0 << (bits - 32)) + (w1 >> (64 - bits)); \ - } while(0) - -#define CAMELLIA_SP1110(INDEX) (camellia_sp1110[(INDEX)]) -#define CAMELLIA_SP0222(INDEX) (camellia_sp0222[(INDEX)]) -#define CAMELLIA_SP3033(INDEX) (camellia_sp3033[(INDEX)]) -#define CAMELLIA_SP4404(INDEX) (camellia_sp4404[(INDEX)]) - -#define CAMELLIA_F(xl, xr, kl, kr, yl, yr, il, ir, t0, t1) \ - do { \ - il = xl ^ kl; \ - ir = xr ^ kr; \ - t0 = il >> 16; \ - t1 = ir >> 16; \ - yl = CAMELLIA_SP1110(ir & 0xff) \ - ^ CAMELLIA_SP0222((t1 >> 8) & 0xff) \ - ^ CAMELLIA_SP3033(t1 & 0xff) \ - ^ CAMELLIA_SP4404((ir >> 8) & 0xff); \ - yr = CAMELLIA_SP1110((t0 >> 8) & 0xff) \ - ^ CAMELLIA_SP0222(t0 & 0xff) \ - ^ CAMELLIA_SP3033((il >> 8) & 0xff) \ - ^ CAMELLIA_SP4404(il & 0xff); \ - yl ^= yr; \ - yr = CAMELLIA_RR8(yr); \ - yr ^= yl; \ - } while(0) - - -/* - * for speed up - * - */ -#define CAMELLIA_FLS(ll, lr, rl, rr, kll, klr, krl, krr, t0, t1, t2, t3) \ - do { \ - t0 = kll; \ - t2 = krr; \ - t0 &= ll; \ - t2 |= rr; \ - rl ^= t2; \ - lr ^= CAMELLIA_RL1(t0); \ - t3 = krl; \ - t1 = klr; \ - t3 &= rl; \ - t1 |= lr; \ - ll ^= t1; \ - rr ^= CAMELLIA_RL1(t3); \ - } while(0) - -#define CAMELLIA_ROUNDSM(xl, xr, kl, kr, yl, yr, il, ir, t0, t1) \ - do { \ - ir = CAMELLIA_SP1110(xr & 0xff); \ - il = CAMELLIA_SP1110((xl>>24) & 0xff); \ - ir ^= CAMELLIA_SP0222((xr>>24) & 0xff); \ - il ^= CAMELLIA_SP0222((xl>>16) & 0xff); \ - ir ^= CAMELLIA_SP3033((xr>>16) & 0xff); \ - il ^= CAMELLIA_SP3033((xl>>8) & 0xff); \ - ir ^= CAMELLIA_SP4404((xr>>8) & 0xff); \ - il ^= CAMELLIA_SP4404(xl & 0xff); \ - il ^= kl; \ - ir ^= il ^ kr; \ - yl ^= ir; \ - yr ^= CAMELLIA_RR8(il) ^ ir; \ - } while(0) - -/** - * Stuff related to the Camellia key schedule - */ -#define SUBL(x) subL[(x)] -#define SUBR(x) subR[(x)] - - static const u32 camellia_sp1110[256] = { 0x70707000,0x82828200,0x2c2c2c00,0xececec00, 0xb3b3b300,0x27272700,0xc0c0c000,0xe5e5e500, @@ -475,6 +305,122 @@ static const u32 camellia_sp4404[256] = { }; +#define CAMELLIA_MIN_KEY_SIZE 16 +#define CAMELLIA_MAX_KEY_SIZE 32 +#define CAMELLIA_BLOCK_SIZE 16 +#define CAMELLIA_TABLE_BYTE_LEN 272 + + +/* key constants */ + +#define CAMELLIA_SIGMA1L (0xA09E667FL) +#define CAMELLIA_SIGMA1R (0x3BCC908BL) +#define CAMELLIA_SIGMA2L (0xB67AE858L) +#define CAMELLIA_SIGMA2R (0x4CAA73B2L) +#define CAMELLIA_SIGMA3L (0xC6EF372FL) +#define CAMELLIA_SIGMA3R (0xE94F82BEL) +#define CAMELLIA_SIGMA4L (0x54FF53A5L) +#define CAMELLIA_SIGMA4R (0xF1D36F1CL) +#define CAMELLIA_SIGMA5L (0x10E527FAL) +#define CAMELLIA_SIGMA5R (0xDE682D1DL) +#define CAMELLIA_SIGMA6L (0xB05688C2L) +#define CAMELLIA_SIGMA6R (0xB3E6C1FDL) + +/* + * macros + */ + +# define GETU32(pt) (((u32)(pt)[0] << 24) \ + ^ ((u32)(pt)[1] << 16) \ + ^ ((u32)(pt)[2] << 8) \ + ^ ((u32)(pt)[3])) + +/* rotation right shift 1byte */ +#define CAMELLIA_RR8(x) (((x) >> 8) + ((x) << 24)) +/* rotation left shift 1bit */ +#define CAMELLIA_RL1(x) (((x) << 1) + ((x) >> 31)) +/* rotation left shift 1byte */ +#define CAMELLIA_RL8(x) (((x) << 8) + ((x) >> 24)) + +#define CAMELLIA_ROLDQ(ll, lr, rl, rr, w0, w1, bits) \ + do { \ + w0 = ll; \ + ll = (ll << bits) + (lr >> (32 - bits)); \ + lr = (lr << bits) + (rl >> (32 - bits)); \ + rl = (rl << bits) + (rr >> (32 - bits)); \ + rr = (rr << bits) + (w0 >> (32 - bits)); \ + } while(0) + +#define CAMELLIA_ROLDQo32(ll, lr, rl, rr, w0, w1, bits) \ + do { \ + w0 = ll; \ + w1 = lr; \ + ll = (lr << (bits - 32)) + (rl >> (64 - bits)); \ + lr = (rl << (bits - 32)) + (rr >> (64 - bits)); \ + rl = (rr << (bits - 32)) + (w0 >> (64 - bits)); \ + rr = (w0 << (bits - 32)) + (w1 >> (64 - bits)); \ + } while(0) + + +#define CAMELLIA_F(xl, xr, kl, kr, yl, yr, il, ir, t0, t1) \ + do { \ + il = xl ^ kl; \ + ir = xr ^ kr; \ + t0 = il >> 16; \ + t1 = ir >> 16; \ + yl = camellia_sp1110[ir & 0xff] \ + ^ camellia_sp0222[(t1 >> 8) & 0xff] \ + ^ camellia_sp3033[t1 & 0xff] \ + ^ camellia_sp4404[(ir >> 8) & 0xff]; \ + yr = camellia_sp1110[(t0 >> 8) & 0xff] \ + ^ camellia_sp0222[t0 & 0xff] \ + ^ camellia_sp3033[(il >> 8) & 0xff] \ + ^ camellia_sp4404[il & 0xff]; \ + yl ^= yr; \ + yr = CAMELLIA_RR8(yr); \ + yr ^= yl; \ + } while(0) + + +/* + * for speed up + * + */ +#define CAMELLIA_FLS(ll, lr, rl, rr, kll, klr, krl, krr, t0, t1, t2, t3) \ + do { \ + t0 = kll; \ + t2 = krr; \ + t0 &= ll; \ + t2 |= rr; \ + rl ^= t2; \ + lr ^= CAMELLIA_RL1(t0); \ + t3 = krl; \ + t1 = klr; \ + t3 &= rl; \ + t1 |= lr; \ + ll ^= t1; \ + rr ^= CAMELLIA_RL1(t3); \ + } while(0) + +#define CAMELLIA_ROUNDSM(xl, xr, kl, kr, yl, yr, il, ir, t0, t1) \ + do { \ + ir = camellia_sp1110[xr & 0xff]; \ + il = camellia_sp1110[(xl>>24) & 0xff]; \ + ir ^= camellia_sp0222[(xr>>24) & 0xff]; \ + il ^= camellia_sp0222[(xl>>16) & 0xff]; \ + ir ^= camellia_sp3033[(xr>>16) & 0xff]; \ + il ^= camellia_sp3033[(xl>>8) & 0xff]; \ + ir ^= camellia_sp4404[(xr>>8) & 0xff]; \ + il ^= camellia_sp4404[xl & 0xff]; \ + il ^= kl; \ + ir ^= il ^ kr; \ + yl ^= ir; \ + yr ^= CAMELLIA_RR8(il) ^ ir; \ + } while(0) + + +#define CAMELLIA_SUBKEY_L(INDEX) (subkey[(INDEX)*2]) +#define CAMELLIA_SUBKEY_R(INDEX) (subkey[(INDEX)*2 + 1]) static void camellia_setup128(const unsigned char *key, u32 *subkey) { @@ -495,47 +441,47 @@ static void camellia_setup128(const unsigned char *key, u32 *subkey) * generate KL dependent subkeys */ /* kw1 */ - SUBL(0) = kll; SUBR(0) = klr; + subL[0] = kll; subR[0] = klr; /* kw2 */ - SUBL(1) = krl; SUBR(1) = krr; + subL[1] = krl; subR[1] = krr; /* rotation left shift 15bit */ CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 15); /* k3 */ - SUBL(4) = kll; SUBR(4) = klr; + subL[4] = kll; subR[4] = klr; /* k4 */ - SUBL(5) = krl; SUBR(5) = krr; + subL[5] = krl; subR[5] = krr; /* rotation left shift 15+30bit */ CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 30); /* k7 */ - SUBL(10) = kll; SUBR(10) = klr; + subL[10] = kll; subR[10] = klr; /* k8 */ - SUBL(11) = krl; SUBR(11) = krr; + subL[11] = krl; subR[11] = krr; /* rotation left shift 15+30+15bit */ CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 15); /* k10 */ - SUBL(13) = krl; SUBR(13) = krr; + subL[13] = krl; subR[13] = krr; /* rotation left shift 15+30+15+17 bit */ CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 17); /* kl3 */ - SUBL(16) = kll; SUBR(16) = klr; + subL[16] = kll; subR[16] = klr; /* kl4 */ - SUBL(17) = krl; SUBR(17) = krr; + subL[17] = krl; subR[17] = krr; /* rotation left shift 15+30+15+17+17 bit */ CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 17); /* k13 */ - SUBL(18) = kll; SUBR(18) = klr; + subL[18] = kll; subR[18] = klr; /* k14 */ - SUBL(19) = krl; SUBR(19) = krr; + subL[19] = krl; subR[19] = krr; /* rotation left shift 15+30+15+17+17+17 bit */ CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 17); /* k17 */ - SUBL(22) = kll; SUBR(22) = klr; + subL[22] = kll; subR[22] = klr; /* k18 */ - SUBL(23) = krl; SUBR(23) = krr; + subL[23] = krl; subR[23] = krr; /* generate KA */ - kll = SUBL(0); klr = SUBR(0); - krl = SUBL(1); krr = SUBR(1); + kll = subL[0]; klr = subR[0]; + krl = subL[1]; krr = subR[1]; CAMELLIA_F(kll, klr, CAMELLIA_SIGMA1L, CAMELLIA_SIGMA1R, w0, w1, il, ir, t0, t1); @@ -555,152 +501,150 @@ static void camellia_setup128(const unsigned char *key, u32 *subkey) /* generate KA dependent subkeys */ /* k1, k2 */ - SUBL(2) = kll; SUBR(2) = klr; - SUBL(3) = krl; SUBR(3) = krr; + subL[2] = kll; subR[2] = klr; + subL[3] = krl; subR[3] = krr; CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 15); /* k5,k6 */ - SUBL(6) = kll; SUBR(6) = klr; - SUBL(7) = krl; SUBR(7) = krr; + subL[6] = kll; subR[6] = klr; + subL[7] = krl; subR[7] = krr; CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 15); /* kl1, kl2 */ - SUBL(8) = kll; SUBR(8) = klr; - SUBL(9) = krl; SUBR(9) = krr; + subL[8] = kll; subR[8] = klr; + subL[9] = krl; subR[9] = krr; CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 15); /* k9 */ - SUBL(12) = kll; SUBR(12) = klr; + subL[12] = kll; subR[12] = klr; CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 15); /* k11, k12 */ - SUBL(14) = kll; SUBR(14) = klr; - SUBL(15) = krl; SUBR(15) = krr; + subL[14] = kll; subR[14] = klr; + subL[15] = krl; subR[15] = krr; CAMELLIA_ROLDQo32(kll, klr, krl, krr, w0, w1, 34); /* k15, k16 */ - SUBL(20) = kll; SUBR(20) = klr; - SUBL(21) = krl; SUBR(21) = krr; + subL[20] = kll; subR[20] = klr; + subL[21] = krl; subR[21] = krr; CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 17); /* kw3, kw4 */ - SUBL(24) = kll; SUBR(24) = klr; - SUBL(25) = krl; SUBR(25) = krr; - + subL[24] = kll; subR[24] = klr; + subL[25] = krl; subR[25] = krr; /* absorb kw2 to other subkeys */ /* round 2 */ - SUBL(3) ^= SUBL(1); SUBR(3) ^= SUBR(1); + subL[3] ^= subL[1]; subR[3] ^= subR[1]; /* round 4 */ - SUBL(5) ^= SUBL(1); SUBR(5) ^= SUBR(1); + subL[5] ^= subL[1]; subR[5] ^= subR[1]; /* round 6 */ - SUBL(7) ^= SUBL(1); SUBR(7) ^= SUBR(1); - SUBL(1) ^= SUBR(1) & ~SUBR(9); - dw = SUBL(1) & SUBL(9), - SUBR(1) ^= CAMELLIA_RL1(dw); /* modified for FLinv(kl2) */ + subL[7] ^= subL[1]; subR[7] ^= subR[1]; + subL[1] ^= subR[1] & ~subR[9]; + dw = subL[1] & subL[9], + subR[1] ^= CAMELLIA_RL1(dw); /* modified for FLinv(kl2) */ /* round 8 */ - SUBL(11) ^= SUBL(1); SUBR(11) ^= SUBR(1); + subL[11] ^= subL[1]; subR[11] ^= subR[1]; /* round 10 */ - SUBL(13) ^= SUBL(1); SUBR(13) ^= SUBR(1); + subL[13] ^= subL[1]; subR[13] ^= subR[1]; /* round 12 */ - SUBL(15) ^= SUBL(1); SUBR(15) ^= SUBR(1); - SUBL(1) ^= SUBR(1) & ~SUBR(17); - dw = SUBL(1) & SUBL(17), - SUBR(1) ^= CAMELLIA_RL1(dw); /* modified for FLinv(kl4) */ + subL[15] ^= subL[1]; subR[15] ^= subR[1]; + subL[1] ^= subR[1] & ~subR[17]; + dw = subL[1] & subL[17], + subR[1] ^= CAMELLIA_RL1(dw); /* modified for FLinv(kl4) */ /* round 14 */ - SUBL(19) ^= SUBL(1); SUBR(19) ^= SUBR(1); + subL[19] ^= subL[1]; subR[19] ^= subR[1]; /* round 16 */ - SUBL(21) ^= SUBL(1); SUBR(21) ^= SUBR(1); + subL[21] ^= subL[1]; subR[21] ^= subR[1]; /* round 18 */ - SUBL(23) ^= SUBL(1); SUBR(23) ^= SUBR(1); + subL[23] ^= subL[1]; subR[23] ^= subR[1]; /* kw3 */ - SUBL(24) ^= SUBL(1); SUBR(24) ^= SUBR(1); + subL[24] ^= subL[1]; subR[24] ^= subR[1]; /* absorb kw4 to other subkeys */ - kw4l = SUBL(25); kw4r = SUBR(25); + kw4l = subL[25]; kw4r = subR[25]; /* round 17 */ - SUBL(22) ^= kw4l; SUBR(22) ^= kw4r; + subL[22] ^= kw4l; subR[22] ^= kw4r; /* round 15 */ - SUBL(20) ^= kw4l; SUBR(20) ^= kw4r; + subL[20] ^= kw4l; subR[20] ^= kw4r; /* round 13 */ - SUBL(18) ^= kw4l; SUBR(18) ^= kw4r; - kw4l ^= kw4r & ~SUBR(16); - dw = kw4l & SUBL(16), + subL[18] ^= kw4l; subR[18] ^= kw4r; + kw4l ^= kw4r & ~subR[16]; + dw = kw4l & subL[16], kw4r ^= CAMELLIA_RL1(dw); /* modified for FL(kl3) */ /* round 11 */ - SUBL(14) ^= kw4l; SUBR(14) ^= kw4r; + subL[14] ^= kw4l; subR[14] ^= kw4r; /* round 9 */ - SUBL(12) ^= kw4l; SUBR(12) ^= kw4r; + subL[12] ^= kw4l; subR[12] ^= kw4r; /* round 7 */ - SUBL(10) ^= kw4l; SUBR(10) ^= kw4r; - kw4l ^= kw4r & ~SUBR(8); - dw = kw4l & SUBL(8), + subL[10] ^= kw4l; subR[10] ^= kw4r; + kw4l ^= kw4r & ~subR[8]; + dw = kw4l & subL[8], kw4r ^= CAMELLIA_RL1(dw); /* modified for FL(kl1) */ /* round 5 */ - SUBL(6) ^= kw4l; SUBR(6) ^= kw4r; + subL[6] ^= kw4l; subR[6] ^= kw4r; /* round 3 */ - SUBL(4) ^= kw4l; SUBR(4) ^= kw4r; + subL[4] ^= kw4l; subR[4] ^= kw4r; /* round 1 */ - SUBL(2) ^= kw4l; SUBR(2) ^= kw4r; + subL[2] ^= kw4l; subR[2] ^= kw4r; /* kw1 */ - SUBL(0) ^= kw4l; SUBR(0) ^= kw4r; - + subL[0] ^= kw4l; subR[0] ^= kw4r; /* key XOR is end of F-function */ - CAMELLIA_SUBKEY_L(0) = SUBL(0) ^ SUBL(2);/* kw1 */ - CAMELLIA_SUBKEY_R(0) = SUBR(0) ^ SUBR(2); - CAMELLIA_SUBKEY_L(2) = SUBL(3); /* round 1 */ - CAMELLIA_SUBKEY_R(2) = SUBR(3); - CAMELLIA_SUBKEY_L(3) = SUBL(2) ^ SUBL(4); /* round 2 */ - CAMELLIA_SUBKEY_R(3) = SUBR(2) ^ SUBR(4); - CAMELLIA_SUBKEY_L(4) = SUBL(3) ^ SUBL(5); /* round 3 */ - CAMELLIA_SUBKEY_R(4) = SUBR(3) ^ SUBR(5); - CAMELLIA_SUBKEY_L(5) = SUBL(4) ^ SUBL(6); /* round 4 */ - CAMELLIA_SUBKEY_R(5) = SUBR(4) ^ SUBR(6); - CAMELLIA_SUBKEY_L(6) = SUBL(5) ^ SUBL(7); /* round 5 */ - CAMELLIA_SUBKEY_R(6) = SUBR(5) ^ SUBR(7); - tl = SUBL(10) ^ (SUBR(10) & ~SUBR(8)); - dw = tl & SUBL(8), /* FL(kl1) */ - tr = SUBR(10) ^ CAMELLIA_RL1(dw); - CAMELLIA_SUBKEY_L(7) = SUBL(6) ^ tl; /* round 6 */ - CAMELLIA_SUBKEY_R(7) = SUBR(6) ^ tr; - CAMELLIA_SUBKEY_L(8) = SUBL(8); /* FL(kl1) */ - CAMELLIA_SUBKEY_R(8) = SUBR(8); - CAMELLIA_SUBKEY_L(9) = SUBL(9); /* FLinv(kl2) */ - CAMELLIA_SUBKEY_R(9) = SUBR(9); - tl = SUBL(7) ^ (SUBR(7) & ~SUBR(9)); - dw = tl & SUBL(9), /* FLinv(kl2) */ - tr = SUBR(7) ^ CAMELLIA_RL1(dw); - CAMELLIA_SUBKEY_L(10) = tl ^ SUBL(11); /* round 7 */ - CAMELLIA_SUBKEY_R(10) = tr ^ SUBR(11); - CAMELLIA_SUBKEY_L(11) = SUBL(10) ^ SUBL(12); /* round 8 */ - CAMELLIA_SUBKEY_R(11) = SUBR(10) ^ SUBR(12); - CAMELLIA_SUBKEY_L(12) = SUBL(11) ^ SUBL(13); /* round 9 */ - CAMELLIA_SUBKEY_R(12) = SUBR(11) ^ SUBR(13); - CAMELLIA_SUBKEY_L(13) = SUBL(12) ^ SUBL(14); /* round 10 */ - CAMELLIA_SUBKEY_R(13) = SUBR(12) ^ SUBR(14); - CAMELLIA_SUBKEY_L(14) = SUBL(13) ^ SUBL(15); /* round 11 */ - CAMELLIA_SUBKEY_R(14) = SUBR(13) ^ SUBR(15); - tl = SUBL(18) ^ (SUBR(18) & ~SUBR(16)); - dw = tl & SUBL(16), /* FL(kl3) */ - tr = SUBR(18) ^ CAMELLIA_RL1(dw); - CAMELLIA_SUBKEY_L(15) = SUBL(14) ^ tl; /* round 12 */ - CAMELLIA_SUBKEY_R(15) = SUBR(14) ^ tr; - CAMELLIA_SUBKEY_L(16) = SUBL(16); /* FL(kl3) */ - CAMELLIA_SUBKEY_R(16) = SUBR(16); - CAMELLIA_SUBKEY_L(17) = SUBL(17); /* FLinv(kl4) */ - CAMELLIA_SUBKEY_R(17) = SUBR(17); - tl = SUBL(15) ^ (SUBR(15) & ~SUBR(17)); - dw = tl & SUBL(17), /* FLinv(kl4) */ - tr = SUBR(15) ^ CAMELLIA_RL1(dw); - CAMELLIA_SUBKEY_L(18) = tl ^ SUBL(19); /* round 13 */ - CAMELLIA_SUBKEY_R(18) = tr ^ SUBR(19); - CAMELLIA_SUBKEY_L(19) = SUBL(18) ^ SUBL(20); /* round 14 */ - CAMELLIA_SUBKEY_R(19) = SUBR(18) ^ SUBR(20); - CAMELLIA_SUBKEY_L(20) = SUBL(19) ^ SUBL(21); /* round 15 */ - CAMELLIA_SUBKEY_R(20) = SUBR(19) ^ SUBR(21); - CAMELLIA_SUBKEY_L(21) = SUBL(20) ^ SUBL(22); /* round 16 */ - CAMELLIA_SUBKEY_R(21) = SUBR(20) ^ SUBR(22); - CAMELLIA_SUBKEY_L(22) = SUBL(21) ^ SUBL(23); /* round 17 */ - CAMELLIA_SUBKEY_R(22) = SUBR(21) ^ SUBR(23); - CAMELLIA_SUBKEY_L(23) = SUBL(22); /* round 18 */ - CAMELLIA_SUBKEY_R(23) = SUBR(22); - CAMELLIA_SUBKEY_L(24) = SUBL(24) ^ SUBL(23); /* kw3 */ - CAMELLIA_SUBKEY_R(24) = SUBR(24) ^ SUBR(23); + CAMELLIA_SUBKEY_L(0) = subL[0] ^ subL[2];/* kw1 */ + CAMELLIA_SUBKEY_R(0) = subR[0] ^ subR[2]; + CAMELLIA_SUBKEY_L(2) = subL[3]; /* round 1 */ + CAMELLIA_SUBKEY_R(2) = subR[3]; + CAMELLIA_SUBKEY_L(3) = subL[2] ^ subL[4]; /* round 2 */ + CAMELLIA_SUBKEY_R(3) = subR[2] ^ subR[4]; + CAMELLIA_SUBKEY_L(4) = subL[3] ^ subL[5]; /* round 3 */ + CAMELLIA_SUBKEY_R(4) = subR[3] ^ subR[5]; + CAMELLIA_SUBKEY_L(5) = subL[4] ^ subL[6]; /* round 4 */ + CAMELLIA_SUBKEY_R(5) = subR[4] ^ subR[6]; + CAMELLIA_SUBKEY_L(6) = subL[5] ^ subL[7]; /* round 5 */ + CAMELLIA_SUBKEY_R(6) = subR[5] ^ subR[7]; + tl = subL[10] ^ (subR[10] & ~subR[8]); + dw = tl & subL[8], /* FL(kl1) */ + tr = subR[10] ^ CAMELLIA_RL1(dw); + CAMELLIA_SUBKEY_L(7) = subL[6] ^ tl; /* round 6 */ + CAMELLIA_SUBKEY_R(7) = subR[6] ^ tr; + CAMELLIA_SUBKEY_L(8) = subL[8]; /* FL(kl1) */ + CAMELLIA_SUBKEY_R(8) = subR[8]; + CAMELLIA_SUBKEY_L(9) = subL[9]; /* FLinv(kl2) */ + CAMELLIA_SUBKEY_R(9) = subR[9]; + tl = subL[7] ^ (subR[7] & ~subR[9]); + dw = tl & subL[9], /* FLinv(kl2) */ + tr = subR[7] ^ CAMELLIA_RL1(dw); + CAMELLIA_SUBKEY_L(10) = tl ^ subL[11]; /* round 7 */ + CAMELLIA_SUBKEY_R(10) = tr ^ subR[11]; + CAMELLIA_SUBKEY_L(11) = subL[10] ^ subL[12]; /* round 8 */ + CAMELLIA_SUBKEY_R(11) = subR[10] ^ subR[12]; + CAMELLIA_SUBKEY_L(12) = subL[11] ^ subL[13]; /* round 9 */ + CAMELLIA_SUBKEY_R(12) = subR[11] ^ subR[13]; + CAMELLIA_SUBKEY_L(13) = subL[12] ^ subL[14]; /* round 10 */ + CAMELLIA_SUBKEY_R(13) = subR[12] ^ subR[14]; + CAMELLIA_SUBKEY_L(14) = subL[13] ^ subL[15]; /* round 11 */ + CAMELLIA_SUBKEY_R(14) = subR[13] ^ subR[15]; + tl = subL[18] ^ (subR[18] & ~subR[16]); + dw = tl & subL[16], /* FL(kl3) */ + tr = subR[18] ^ CAMELLIA_RL1(dw); + CAMELLIA_SUBKEY_L(15) = subL[14] ^ tl; /* round 12 */ + CAMELLIA_SUBKEY_R(15) = subR[14] ^ tr; + CAMELLIA_SUBKEY_L(16) = subL[16]; /* FL(kl3) */ + CAMELLIA_SUBKEY_R(16) = subR[16]; + CAMELLIA_SUBKEY_L(17) = subL[17]; /* FLinv(kl4) */ + CAMELLIA_SUBKEY_R(17) = subR[17]; + tl = subL[15] ^ (subR[15] & ~subR[17]); + dw = tl & subL[17], /* FLinv(kl4) */ + tr = subR[15] ^ CAMELLIA_RL1(dw); + CAMELLIA_SUBKEY_L(18) = tl ^ subL[19]; /* round 13 */ + CAMELLIA_SUBKEY_R(18) = tr ^ subR[19]; + CAMELLIA_SUBKEY_L(19) = subL[18] ^ subL[20]; /* round 14 */ + CAMELLIA_SUBKEY_R(19) = subR[18] ^ subR[20]; + CAMELLIA_SUBKEY_L(20) = subL[19] ^ subL[21]; /* round 15 */ + CAMELLIA_SUBKEY_R(20) = subR[19] ^ subR[21]; + CAMELLIA_SUBKEY_L(21) = subL[20] ^ subL[22]; /* round 16 */ + CAMELLIA_SUBKEY_R(21) = subR[20] ^ subR[22]; + CAMELLIA_SUBKEY_L(22) = subL[21] ^ subL[23]; /* round 17 */ + CAMELLIA_SUBKEY_R(22) = subR[21] ^ subR[23]; + CAMELLIA_SUBKEY_L(23) = subL[22]; /* round 18 */ + CAMELLIA_SUBKEY_R(23) = subR[22]; + CAMELLIA_SUBKEY_L(24) = subL[24] ^ subL[23]; /* kw3 */ + CAMELLIA_SUBKEY_R(24) = subR[24] ^ subR[23]; /* apply the inverse of the last half of P-function */ dw = CAMELLIA_SUBKEY_L(2) ^ CAMELLIA_SUBKEY_R(2), @@ -775,11 +719,8 @@ static void camellia_setup128(const unsigned char *key, u32 *subkey) dw = CAMELLIA_RL8(dw);/* round 18 */ CAMELLIA_SUBKEY_R(23) = CAMELLIA_SUBKEY_L(23) ^ dw, CAMELLIA_SUBKEY_L(23) = dw; - - return; } - static void camellia_setup256(const unsigned char *key, u32 *subkey) { u32 kll,klr,krl,krr; /* left half of key */ @@ -805,56 +746,56 @@ static void camellia_setup256(const unsigned char *key, u32 *subkey) /* generate KL dependent subkeys */ /* kw1 */ - SUBL(0) = kll; SUBR(0) = klr; + subL[0] = kll; subR[0] = klr; /* kw2 */ - SUBL(1) = krl; SUBR(1) = krr; + subL[1] = krl; subR[1] = krr; CAMELLIA_ROLDQo32(kll, klr, krl, krr, w0, w1, 45); /* k9 */ - SUBL(12) = kll; SUBR(12) = klr; + subL[12] = kll; subR[12] = klr; /* k10 */ - SUBL(13) = krl; SUBR(13) = krr; + subL[13] = krl; subR[13] = krr; CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 15); /* kl3 */ - SUBL(16) = kll; SUBR(16) = klr; + subL[16] = kll; subR[16] = klr; /* kl4 */ - SUBL(17) = krl; SUBR(17) = krr; + subL[17] = krl; subR[17] = krr; CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 17); /* k17 */ - SUBL(22) = kll; SUBR(22) = klr; + subL[22] = kll; subR[22] = klr; /* k18 */ - SUBL(23) = krl; SUBR(23) = krr; + subL[23] = krl; subR[23] = krr; CAMELLIA_ROLDQo32(kll, klr, krl, krr, w0, w1, 34); /* k23 */ - SUBL(30) = kll; SUBR(30) = klr; + subL[30] = kll; subR[30] = klr; /* k24 */ - SUBL(31) = krl; SUBR(31) = krr; + subL[31] = krl; subR[31] = krr; /* generate KR dependent subkeys */ CAMELLIA_ROLDQ(krll, krlr, krrl, krrr, w0, w1, 15); /* k3 */ - SUBL(4) = krll; SUBR(4) = krlr; + subL[4] = krll; subR[4] = krlr; /* k4 */ - SUBL(5) = krrl; SUBR(5) = krrr; + subL[5] = krrl; subR[5] = krrr; CAMELLIA_ROLDQ(krll, krlr, krrl, krrr, w0, w1, 15); /* kl1 */ - SUBL(8) = krll; SUBR(8) = krlr; + subL[8] = krll; subR[8] = krlr; /* kl2 */ - SUBL(9) = krrl; SUBR(9) = krrr; + subL[9] = krrl; subR[9] = krrr; CAMELLIA_ROLDQ(krll, krlr, krrl, krrr, w0, w1, 30); /* k13 */ - SUBL(18) = krll; SUBR(18) = krlr; + subL[18] = krll; subR[18] = krlr; /* k14 */ - SUBL(19) = krrl; SUBR(19) = krrr; + subL[19] = krrl; subR[19] = krrr; CAMELLIA_ROLDQo32(krll, krlr, krrl, krrr, w0, w1, 34); /* k19 */ - SUBL(26) = krll; SUBR(26) = krlr; + subL[26] = krll; subR[26] = krlr; /* k20 */ - SUBL(27) = krrl; SUBR(27) = krrr; + subL[27] = krrl; subR[27] = krrr; CAMELLIA_ROLDQo32(krll, krlr, krrl, krrr, w0, w1, 34); /* generate KA */ - kll = SUBL(0) ^ krll; klr = SUBR(0) ^ krlr; - krl = SUBL(1) ^ krrl; krr = SUBR(1) ^ krrr; + kll = subL[0] ^ krll; klr = subR[0] ^ krlr; + krl = subL[1] ^ krrl; krr = subR[1] ^ krrr; CAMELLIA_F(kll, klr, CAMELLIA_SIGMA1L, CAMELLIA_SIGMA1R, w0, w1, il, ir, t0, t1); @@ -887,208 +828,207 @@ static void camellia_setup256(const unsigned char *key, u32 *subkey) /* generate KA dependent subkeys */ CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 15); /* k5 */ - SUBL(6) = kll; SUBR(6) = klr; + subL[6] = kll; subR[6] = klr; /* k6 */ - SUBL(7) = krl; SUBR(7) = krr; + subL[7] = krl; subR[7] = krr; CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 30); /* k11 */ - SUBL(14) = kll; SUBR(14) = klr; + subL[14] = kll; subR[14] = klr; /* k12 */ - SUBL(15) = krl; SUBR(15) = krr; + subL[15] = krl; subR[15] = krr; /* rotation left shift 32bit */ /* kl5 */ - SUBL(24) = klr; SUBR(24) = krl; + subL[24] = klr; subR[24] = krl; /* kl6 */ - SUBL(25) = krr; SUBR(25) = kll; + subL[25] = krr; subR[25] = kll; /* rotation left shift 49 from k11,k12 -> k21,k22 */ CAMELLIA_ROLDQo32(kll, klr, krl, krr, w0, w1, 49); /* k21 */ - SUBL(28) = kll; SUBR(28) = klr; + subL[28] = kll; subR[28] = klr; /* k22 */ - SUBL(29) = krl; SUBR(29) = krr; + subL[29] = krl; subR[29] = krr; /* generate KB dependent subkeys */ /* k1 */ - SUBL(2) = krll; SUBR(2) = krlr; + subL[2] = krll; subR[2] = krlr; /* k2 */ - SUBL(3) = krrl; SUBR(3) = krrr; + subL[3] = krrl; subR[3] = krrr; CAMELLIA_ROLDQ(krll, krlr, krrl, krrr, w0, w1, 30); /* k7 */ - SUBL(10) = krll; SUBR(10) = krlr; + subL[10] = krll; subR[10] = krlr; /* k8 */ - SUBL(11) = krrl; SUBR(11) = krrr; + subL[11] = krrl; subR[11] = krrr; CAMELLIA_ROLDQ(krll, krlr, krrl, krrr, w0, w1, 30); /* k15 */ - SUBL(20) = krll; SUBR(20) = krlr; + subL[20] = krll; subR[20] = krlr; /* k16 */ - SUBL(21) = krrl; SUBR(21) = krrr; + subL[21] = krrl; subR[21] = krrr; CAMELLIA_ROLDQo32(krll, krlr, krrl, krrr, w0, w1, 51); /* kw3 */ - SUBL(32) = krll; SUBR(32) = krlr; + subL[32] = krll; subR[32] = krlr; /* kw4 */ - SUBL(33) = krrl; SUBR(33) = krrr; + subL[33] = krrl; subR[33] = krrr; /* absorb kw2 to other subkeys */ /* round 2 */ - SUBL(3) ^= SUBL(1); SUBR(3) ^= SUBR(1); + subL[3] ^= subL[1]; subR[3] ^= subR[1]; /* round 4 */ - SUBL(5) ^= SUBL(1); SUBR(5) ^= SUBR(1); + subL[5] ^= subL[1]; subR[5] ^= subR[1]; /* round 6 */ - SUBL(7) ^= SUBL(1); SUBR(7) ^= SUBR(1); - SUBL(1) ^= SUBR(1) & ~SUBR(9); - dw = SUBL(1) & SUBL(9), - SUBR(1) ^= CAMELLIA_RL1(dw); /* modified for FLinv(kl2) */ + subL[7] ^= subL[1]; subR[7] ^= subR[1]; + subL[1] ^= subR[1] & ~subR[9]; + dw = subL[1] & subL[9], + subR[1] ^= CAMELLIA_RL1(dw); /* modified for FLinv(kl2) */ /* round 8 */ - SUBL(11) ^= SUBL(1); SUBR(11) ^= SUBR(1); + subL[11] ^= subL[1]; subR[11] ^= subR[1]; /* round 10 */ - SUBL(13) ^= SUBL(1); SUBR(13) ^= SUBR(1); + subL[13] ^= subL[1]; subR[13] ^= subR[1]; /* round 12 */ - SUBL(15) ^= SUBL(1); SUBR(15) ^= SUBR(1); - SUBL(1) ^= SUBR(1) & ~SUBR(17); - dw = SUBL(1) & SUBL(17), - SUBR(1) ^= CAMELLIA_RL1(dw); /* modified for FLinv(kl4) */ + subL[15] ^= subL[1]; subR[15] ^= subR[1]; + subL[1] ^= subR[1] & ~subR[17]; + dw = subL[1] & subL[17], + subR[1] ^= CAMELLIA_RL1(dw); /* modified for FLinv(kl4) */ /* round 14 */ - SUBL(19) ^= SUBL(1); SUBR(19) ^= SUBR(1); + subL[19] ^= subL[1]; subR[19] ^= subR[1]; /* round 16 */ - SUBL(21) ^= SUBL(1); SUBR(21) ^= SUBR(1); + subL[21] ^= subL[1]; subR[21] ^= subR[1]; /* round 18 */ - SUBL(23) ^= SUBL(1); SUBR(23) ^= SUBR(1); - SUBL(1) ^= SUBR(1) & ~SUBR(25); - dw = SUBL(1) & SUBL(25), - SUBR(1) ^= CAMELLIA_RL1(dw); /* modified for FLinv(kl6) */ + subL[23] ^= subL[1]; subR[23] ^= subR[1]; + subL[1] ^= subR[1] & ~subR[25]; + dw = subL[1] & subL[25], + subR[1] ^= CAMELLIA_RL1(dw); /* modified for FLinv(kl6) */ /* round 20 */ - SUBL(27) ^= SUBL(1); SUBR(27) ^= SUBR(1); + subL[27] ^= subL[1]; subR[27] ^= subR[1]; /* round 22 */ - SUBL(29) ^= SUBL(1); SUBR(29) ^= SUBR(1); + subL[29] ^= subL[1]; subR[29] ^= subR[1]; /* round 24 */ - SUBL(31) ^= SUBL(1); SUBR(31) ^= SUBR(1); + subL[31] ^= subL[1]; subR[31] ^= subR[1]; /* kw3 */ - SUBL(32) ^= SUBL(1); SUBR(32) ^= SUBR(1); - + subL[32] ^= subL[1]; subR[32] ^= subR[1]; /* absorb kw4 to other subkeys */ - kw4l = SUBL(33); kw4r = SUBR(33); + kw4l = subL[33]; kw4r = subR[33]; /* round 23 */ - SUBL(30) ^= kw4l; SUBR(30) ^= kw4r; + subL[30] ^= kw4l; subR[30] ^= kw4r; /* round 21 */ - SUBL(28) ^= kw4l; SUBR(28) ^= kw4r; + subL[28] ^= kw4l; subR[28] ^= kw4r; /* round 19 */ - SUBL(26) ^= kw4l; SUBR(26) ^= kw4r; - kw4l ^= kw4r & ~SUBR(24); - dw = kw4l & SUBL(24), + subL[26] ^= kw4l; subR[26] ^= kw4r; + kw4l ^= kw4r & ~subR[24]; + dw = kw4l & subL[24], kw4r ^= CAMELLIA_RL1(dw); /* modified for FL(kl5) */ /* round 17 */ - SUBL(22) ^= kw4l; SUBR(22) ^= kw4r; + subL[22] ^= kw4l; subR[22] ^= kw4r; /* round 15 */ - SUBL(20) ^= kw4l; SUBR(20) ^= kw4r; + subL[20] ^= kw4l; subR[20] ^= kw4r; /* round 13 */ - SUBL(18) ^= kw4l; SUBR(18) ^= kw4r; - kw4l ^= kw4r & ~SUBR(16); - dw = kw4l & SUBL(16), + subL[18] ^= kw4l; subR[18] ^= kw4r; + kw4l ^= kw4r & ~subR[16]; + dw = kw4l & subL[16], kw4r ^= CAMELLIA_RL1(dw); /* modified for FL(kl3) */ /* round 11 */ - SUBL(14) ^= kw4l; SUBR(14) ^= kw4r; + subL[14] ^= kw4l; subR[14] ^= kw4r; /* round 9 */ - SUBL(12) ^= kw4l; SUBR(12) ^= kw4r; + subL[12] ^= kw4l; subR[12] ^= kw4r; /* round 7 */ - SUBL(10) ^= kw4l; SUBR(10) ^= kw4r; - kw4l ^= kw4r & ~SUBR(8); - dw = kw4l & SUBL(8), + subL[10] ^= kw4l; subR[10] ^= kw4r; + kw4l ^= kw4r & ~subR[8]; + dw = kw4l & subL[8], kw4r ^= CAMELLIA_RL1(dw); /* modified for FL(kl1) */ /* round 5 */ - SUBL(6) ^= kw4l; SUBR(6) ^= kw4r; + subL[6] ^= kw4l; subR[6] ^= kw4r; /* round 3 */ - SUBL(4) ^= kw4l; SUBR(4) ^= kw4r; + subL[4] ^= kw4l; subR[4] ^= kw4r; /* round 1 */ - SUBL(2) ^= kw4l; SUBR(2) ^= kw4r; + subL[2] ^= kw4l; subR[2] ^= kw4r; /* kw1 */ - SUBL(0) ^= kw4l; SUBR(0) ^= kw4r; + subL[0] ^= kw4l; subR[0] ^= kw4r; /* key XOR is end of F-function */ - CAMELLIA_SUBKEY_L(0) = SUBL(0) ^ SUBL(2);/* kw1 */ - CAMELLIA_SUBKEY_R(0) = SUBR(0) ^ SUBR(2); - CAMELLIA_SUBKEY_L(2) = SUBL(3); /* round 1 */ - CAMELLIA_SUBKEY_R(2) = SUBR(3); - CAMELLIA_SUBKEY_L(3) = SUBL(2) ^ SUBL(4); /* round 2 */ - CAMELLIA_SUBKEY_R(3) = SUBR(2) ^ SUBR(4); - CAMELLIA_SUBKEY_L(4) = SUBL(3) ^ SUBL(5); /* round 3 */ - CAMELLIA_SUBKEY_R(4) = SUBR(3) ^ SUBR(5); - CAMELLIA_SUBKEY_L(5) = SUBL(4) ^ SUBL(6); /* round 4 */ - CAMELLIA_SUBKEY_R(5) = SUBR(4) ^ SUBR(6); - CAMELLIA_SUBKEY_L(6) = SUBL(5) ^ SUBL(7); /* round 5 */ - CAMELLIA_SUBKEY_R(6) = SUBR(5) ^ SUBR(7); - tl = SUBL(10) ^ (SUBR(10) & ~SUBR(8)); - dw = tl & SUBL(8), /* FL(kl1) */ - tr = SUBR(10) ^ CAMELLIA_RL1(dw); - CAMELLIA_SUBKEY_L(7) = SUBL(6) ^ tl; /* round 6 */ - CAMELLIA_SUBKEY_R(7) = SUBR(6) ^ tr; - CAMELLIA_SUBKEY_L(8) = SUBL(8); /* FL(kl1) */ - CAMELLIA_SUBKEY_R(8) = SUBR(8); - CAMELLIA_SUBKEY_L(9) = SUBL(9); /* FLinv(kl2) */ - CAMELLIA_SUBKEY_R(9) = SUBR(9); - tl = SUBL(7) ^ (SUBR(7) & ~SUBR(9)); - dw = tl & SUBL(9), /* FLinv(kl2) */ - tr = SUBR(7) ^ CAMELLIA_RL1(dw); - CAMELLIA_SUBKEY_L(10) = tl ^ SUBL(11); /* round 7 */ - CAMELLIA_SUBKEY_R(10) = tr ^ SUBR(11); - CAMELLIA_SUBKEY_L(11) = SUBL(10) ^ SUBL(12); /* round 8 */ - CAMELLIA_SUBKEY_R(11) = SUBR(10) ^ SUBR(12); - CAMELLIA_SUBKEY_L(12) = SUBL(11) ^ SUBL(13); /* round 9 */ - CAMELLIA_SUBKEY_R(12) = SUBR(11) ^ SUBR(13); - CAMELLIA_SUBKEY_L(13) = SUBL(12) ^ SUBL(14); /* round 10 */ - CAMELLIA_SUBKEY_R(13) = SUBR(12) ^ SUBR(14); - CAMELLIA_SUBKEY_L(14) = SUBL(13) ^ SUBL(15); /* round 11 */ - CAMELLIA_SUBKEY_R(14) = SUBR(13) ^ SUBR(15); - tl = SUBL(18) ^ (SUBR(18) & ~SUBR(16)); - dw = tl & SUBL(16), /* FL(kl3) */ - tr = SUBR(18) ^ CAMELLIA_RL1(dw); - CAMELLIA_SUBKEY_L(15) = SUBL(14) ^ tl; /* round 12 */ - CAMELLIA_SUBKEY_R(15) = SUBR(14) ^ tr; - CAMELLIA_SUBKEY_L(16) = SUBL(16); /* FL(kl3) */ - CAMELLIA_SUBKEY_R(16) = SUBR(16); - CAMELLIA_SUBKEY_L(17) = SUBL(17); /* FLinv(kl4) */ - CAMELLIA_SUBKEY_R(17) = SUBR(17); - tl = SUBL(15) ^ (SUBR(15) & ~SUBR(17)); - dw = tl & SUBL(17), /* FLinv(kl4) */ - tr = SUBR(15) ^ CAMELLIA_RL1(dw); - CAMELLIA_SUBKEY_L(18) = tl ^ SUBL(19); /* round 13 */ - CAMELLIA_SUBKEY_R(18) = tr ^ SUBR(19); - CAMELLIA_SUBKEY_L(19) = SUBL(18) ^ SUBL(20); /* round 14 */ - CAMELLIA_SUBKEY_R(19) = SUBR(18) ^ SUBR(20); - CAMELLIA_SUBKEY_L(20) = SUBL(19) ^ SUBL(21); /* round 15 */ - CAMELLIA_SUBKEY_R(20) = SUBR(19) ^ SUBR(21); - CAMELLIA_SUBKEY_L(21) = SUBL(20) ^ SUBL(22); /* round 16 */ - CAMELLIA_SUBKEY_R(21) = SUBR(20) ^ SUBR(22); - CAMELLIA_SUBKEY_L(22) = SUBL(21) ^ SUBL(23); /* round 17 */ - CAMELLIA_SUBKEY_R(22) = SUBR(21) ^ SUBR(23); - tl = SUBL(26) ^ (SUBR(26) - & ~SUBR(24)); - dw = tl & SUBL(24), /* FL(kl5) */ - tr = SUBR(26) ^ CAMELLIA_RL1(dw); - CAMELLIA_SUBKEY_L(23) = SUBL(22) ^ tl; /* round 18 */ - CAMELLIA_SUBKEY_R(23) = SUBR(22) ^ tr; - CAMELLIA_SUBKEY_L(24) = SUBL(24); /* FL(kl5) */ - CAMELLIA_SUBKEY_R(24) = SUBR(24); - CAMELLIA_SUBKEY_L(25) = SUBL(25); /* FLinv(kl6) */ - CAMELLIA_SUBKEY_R(25) = SUBR(25); - tl = SUBL(23) ^ (SUBR(23) & - ~SUBR(25)); - dw = tl & SUBL(25), /* FLinv(kl6) */ - tr = SUBR(23) ^ CAMELLIA_RL1(dw); - CAMELLIA_SUBKEY_L(26) = tl ^ SUBL(27); /* round 19 */ - CAMELLIA_SUBKEY_R(26) = tr ^ SUBR(27); - CAMELLIA_SUBKEY_L(27) = SUBL(26) ^ SUBL(28); /* round 20 */ - CAMELLIA_SUBKEY_R(27) = SUBR(26) ^ SUBR(28); - CAMELLIA_SUBKEY_L(28) = SUBL(27) ^ SUBL(29); /* round 21 */ - CAMELLIA_SUBKEY_R(28) = SUBR(27) ^ SUBR(29); - CAMELLIA_SUBKEY_L(29) = SUBL(28) ^ SUBL(30); /* round 22 */ - CAMELLIA_SUBKEY_R(29) = SUBR(28) ^ SUBR(30); - CAMELLIA_SUBKEY_L(30) = SUBL(29) ^ SUBL(31); /* round 23 */ - CAMELLIA_SUBKEY_R(30) = SUBR(29) ^ SUBR(31); - CAMELLIA_SUBKEY_L(31) = SUBL(30); /* round 24 */ - CAMELLIA_SUBKEY_R(31) = SUBR(30); - CAMELLIA_SUBKEY_L(32) = SUBL(32) ^ SUBL(31); /* kw3 */ - CAMELLIA_SUBKEY_R(32) = SUBR(32) ^ SUBR(31); + CAMELLIA_SUBKEY_L(0) = subL[0] ^ subL[2];/* kw1 */ + CAMELLIA_SUBKEY_R(0) = subR[0] ^ subR[2]; + CAMELLIA_SUBKEY_L(2) = subL[3]; /* round 1 */ + CAMELLIA_SUBKEY_R(2) = subR[3]; + CAMELLIA_SUBKEY_L(3) = subL[2] ^ subL[4]; /* round 2 */ + CAMELLIA_SUBKEY_R(3) = subR[2] ^ subR[4]; + CAMELLIA_SUBKEY_L(4) = subL[3] ^ subL[5]; /* round 3 */ + CAMELLIA_SUBKEY_R(4) = subR[3] ^ subR[5]; + CAMELLIA_SUBKEY_L(5) = subL[4] ^ subL[6]; /* round 4 */ + CAMELLIA_SUBKEY_R(5) = subR[4] ^ subR[6]; + CAMELLIA_SUBKEY_L(6) = subL[5] ^ subL[7]; /* round 5 */ + CAMELLIA_SUBKEY_R(6) = subR[5] ^ subR[7]; + tl = subL[10] ^ (subR[10] & ~subR[8]); + dw = tl & subL[8], /* FL(kl1) */ + tr = subR[10] ^ CAMELLIA_RL1(dw); + CAMELLIA_SUBKEY_L(7) = subL[6] ^ tl; /* round 6 */ + CAMELLIA_SUBKEY_R(7) = subR[6] ^ tr; + CAMELLIA_SUBKEY_L(8) = subL[8]; /* FL(kl1) */ + CAMELLIA_SUBKEY_R(8) = subR[8]; + CAMELLIA_SUBKEY_L(9) = subL[9]; /* FLinv(kl2) */ + CAMELLIA_SUBKEY_R(9) = subR[9]; + tl = subL[7] ^ (subR[7] & ~subR[9]); + dw = tl & subL[9], /* FLinv(kl2) */ + tr = subR[7] ^ CAMELLIA_RL1(dw); + CAMELLIA_SUBKEY_L(10) = tl ^ subL[11]; /* round 7 */ + CAMELLIA_SUBKEY_R(10) = tr ^ subR[11]; + CAMELLIA_SUBKEY_L(11) = subL[10] ^ subL[12]; /* round 8 */ + CAMELLIA_SUBKEY_R(11) = subR[10] ^ subR[12]; + CAMELLIA_SUBKEY_L(12) = subL[11] ^ subL[13]; /* round 9 */ + CAMELLIA_SUBKEY_R(12) = subR[11] ^ subR[13]; + CAMELLIA_SUBKEY_L(13) = subL[12] ^ subL[14]; /* round 10 */ + CAMELLIA_SUBKEY_R(13) = subR[12] ^ subR[14]; + CAMELLIA_SUBKEY_L(14) = subL[13] ^ subL[15]; /* round 11 */ + CAMELLIA_SUBKEY_R(14) = subR[13] ^ subR[15]; + tl = subL[18] ^ (subR[18] & ~subR[16]); + dw = tl & subL[16], /* FL(kl3) */ + tr = subR[18] ^ CAMELLIA_RL1(dw); + CAMELLIA_SUBKEY_L(15) = subL[14] ^ tl; /* round 12 */ + CAMELLIA_SUBKEY_R(15) = subR[14] ^ tr; + CAMELLIA_SUBKEY_L(16) = subL[16]; /* FL(kl3) */ + CAMELLIA_SUBKEY_R(16) = subR[16]; + CAMELLIA_SUBKEY_L(17) = subL[17]; /* FLinv(kl4) */ + CAMELLIA_SUBKEY_R(17) = subR[17]; + tl = subL[15] ^ (subR[15] & ~subR[17]); + dw = tl & subL[17], /* FLinv(kl4) */ + tr = subR[15] ^ CAMELLIA_RL1(dw); + CAMELLIA_SUBKEY_L(18) = tl ^ subL[19]; /* round 13 */ + CAMELLIA_SUBKEY_R(18) = tr ^ subR[19]; + CAMELLIA_SUBKEY_L(19) = subL[18] ^ subL[20]; /* round 14 */ + CAMELLIA_SUBKEY_R(19) = subR[18] ^ subR[20]; + CAMELLIA_SUBKEY_L(20) = subL[19] ^ subL[21]; /* round 15 */ + CAMELLIA_SUBKEY_R(20) = subR[19] ^ subR[21]; + CAMELLIA_SUBKEY_L(21) = subL[20] ^ subL[22]; /* round 16 */ + CAMELLIA_SUBKEY_R(21) = subR[20] ^ subR[22]; + CAMELLIA_SUBKEY_L(22) = subL[21] ^ subL[23]; /* round 17 */ + CAMELLIA_SUBKEY_R(22) = subR[21] ^ subR[23]; + tl = subL[26] ^ (subR[26] + & ~subR[24]); + dw = tl & subL[24], /* FL(kl5) */ + tr = subR[26] ^ CAMELLIA_RL1(dw); + CAMELLIA_SUBKEY_L(23) = subL[22] ^ tl; /* round 18 */ + CAMELLIA_SUBKEY_R(23) = subR[22] ^ tr; + CAMELLIA_SUBKEY_L(24) = subL[24]; /* FL(kl5) */ + CAMELLIA_SUBKEY_R(24) = subR[24]; + CAMELLIA_SUBKEY_L(25) = subL[25]; /* FLinv(kl6) */ + CAMELLIA_SUBKEY_R(25) = subR[25]; + tl = subL[23] ^ (subR[23] & + ~subR[25]); + dw = tl & subL[25], /* FLinv(kl6) */ + tr = subR[23] ^ CAMELLIA_RL1(dw); + CAMELLIA_SUBKEY_L(26) = tl ^ subL[27]; /* round 19 */ + CAMELLIA_SUBKEY_R(26) = tr ^ subR[27]; + CAMELLIA_SUBKEY_L(27) = subL[26] ^ subL[28]; /* round 20 */ + CAMELLIA_SUBKEY_R(27) = subR[26] ^ subR[28]; + CAMELLIA_SUBKEY_L(28) = subL[27] ^ subL[29]; /* round 21 */ + CAMELLIA_SUBKEY_R(28) = subR[27] ^ subR[29]; + CAMELLIA_SUBKEY_L(29) = subL[28] ^ subL[30]; /* round 22 */ + CAMELLIA_SUBKEY_R(29) = subR[28] ^ subR[30]; + CAMELLIA_SUBKEY_L(30) = subL[29] ^ subL[31]; /* round 23 */ + CAMELLIA_SUBKEY_R(30) = subR[29] ^ subR[31]; + CAMELLIA_SUBKEY_L(31) = subL[30]; /* round 24 */ + CAMELLIA_SUBKEY_R(31) = subR[30]; + CAMELLIA_SUBKEY_L(32) = subL[32] ^ subL[31]; /* kw3 */ + CAMELLIA_SUBKEY_R(32) = subR[32] ^ subR[31]; /* apply the inverse of the last half of P-function */ dw = CAMELLIA_SUBKEY_L(2) ^ CAMELLIA_SUBKEY_R(2), @@ -1187,8 +1127,6 @@ static void camellia_setup256(const unsigned char *key, u32 *subkey) dw = CAMELLIA_RL8(dw);/* round 24 */ CAMELLIA_SUBKEY_R(31) = CAMELLIA_SUBKEY_L(31) ^ dw, CAMELLIA_SUBKEY_L(31) = dw; - - return; } static void camellia_setup192(const unsigned char *key, u32 *subkey) @@ -1197,20 +1135,16 @@ static void camellia_setup192(const unsigned char *key, u32 *subkey) u32 krll, krlr, krrl,krrr; memcpy(kk, key, 24); - memcpy((unsigned char *)&krll, key+16,4); - memcpy((unsigned char *)&krlr, key+20,4); + memcpy((unsigned char *)&krll, key+16, 4); + memcpy((unsigned char *)&krlr, key+20, 4); krrl = ~krll; krrr = ~krlr; memcpy(kk+24, (unsigned char *)&krrl, 4); memcpy(kk+28, (unsigned char *)&krrr, 4); camellia_setup256(kk, subkey); - return; } -/** - * Stuff related to camellia encryption/decryption - */ static void camellia_encrypt128(const u32 *subkey, __be32 *io_text) { u32 il,ir,t0,t1; /* temporary valiables */ @@ -1222,11 +1156,11 @@ static void camellia_encrypt128(const u32 *subkey, __be32 *io_text) io[2] = be32_to_cpu(io_text[2]); io[3] = be32_to_cpu(io_text[3]); - /* pre whitening but absorb kw2*/ + /* pre whitening but absorb kw2 */ io[0] ^= CAMELLIA_SUBKEY_L(0); io[1] ^= CAMELLIA_SUBKEY_R(0); - /* main iteration */ + /* main iteration */ CAMELLIA_ROUNDSM(io[0],io[1], CAMELLIA_SUBKEY_L(2),CAMELLIA_SUBKEY_R(2), io[2],io[3],il,ir,t0,t1); @@ -1298,19 +1232,10 @@ static void camellia_encrypt128(const u32 *subkey, __be32 *io_text) io[2] ^= CAMELLIA_SUBKEY_L(24); io[3] ^= CAMELLIA_SUBKEY_R(24); - t0 = io[0]; - t1 = io[1]; - io[0] = io[2]; - io[1] = io[3]; - io[2] = t0; - io[3] = t1; - - io_text[0] = cpu_to_be32(io[0]); - io_text[1] = cpu_to_be32(io[1]); - io_text[2] = cpu_to_be32(io[2]); - io_text[3] = cpu_to_be32(io[3]); - - return; + io_text[0] = cpu_to_be32(io[2]); + io_text[1] = cpu_to_be32(io[3]); + io_text[2] = cpu_to_be32(io[0]); + io_text[3] = cpu_to_be32(io[1]); } static void camellia_decrypt128(const u32 *subkey, __be32 *io_text) @@ -1324,7 +1249,7 @@ static void camellia_decrypt128(const u32 *subkey, __be32 *io_text) io[2] = be32_to_cpu(io_text[2]); io[3] = be32_to_cpu(io_text[3]); - /* pre whitening but absorb kw2*/ + /* pre whitening but absorb kw2 */ io[0] ^= CAMELLIA_SUBKEY_L(24); io[1] ^= CAMELLIA_SUBKEY_R(24); @@ -1400,25 +1325,12 @@ static void camellia_decrypt128(const u32 *subkey, __be32 *io_text) io[2] ^= CAMELLIA_SUBKEY_L(0); io[3] ^= CAMELLIA_SUBKEY_R(0); - t0 = io[0]; - t1 = io[1]; - io[0] = io[2]; - io[1] = io[3]; - io[2] = t0; - io[3] = t1; - - io_text[0] = cpu_to_be32(io[0]); - io_text[1] = cpu_to_be32(io[1]); - io_text[2] = cpu_to_be32(io[2]); - io_text[3] = cpu_to_be32(io[3]); - - return; + io_text[0] = cpu_to_be32(io[2]); + io_text[1] = cpu_to_be32(io[3]); + io_text[2] = cpu_to_be32(io[0]); + io_text[3] = cpu_to_be32(io[1]); } - -/** - * stuff for 192 and 256bit encryption/decryption - */ static void camellia_encrypt256(const u32 *subkey, __be32 *io_text) { u32 il,ir,t0,t1; /* temporary valiables */ @@ -1430,7 +1342,7 @@ static void camellia_encrypt256(const u32 *subkey, __be32 *io_text) io[2] = be32_to_cpu(io_text[2]); io[3] = be32_to_cpu(io_text[3]); - /* pre whitening but absorb kw2*/ + /* pre whitening but absorb kw2 */ io[0] ^= CAMELLIA_SUBKEY_L(0); io[1] ^= CAMELLIA_SUBKEY_R(0); @@ -1530,22 +1442,12 @@ static void camellia_encrypt256(const u32 *subkey, __be32 *io_text) io[2] ^= CAMELLIA_SUBKEY_L(32); io[3] ^= CAMELLIA_SUBKEY_R(32); - t0 = io[0]; - t1 = io[1]; - io[0] = io[2]; - io[1] = io[3]; - io[2] = t0; - io[3] = t1; - - io_text[0] = cpu_to_be32(io[0]); - io_text[1] = cpu_to_be32(io[1]); - io_text[2] = cpu_to_be32(io[2]); - io_text[3] = cpu_to_be32(io[3]); - - return; + io_text[0] = cpu_to_be32(io[2]); + io_text[1] = cpu_to_be32(io[3]); + io_text[2] = cpu_to_be32(io[0]); + io_text[3] = cpu_to_be32(io[1]); } - static void camellia_decrypt256(const u32 *subkey, __be32 *io_text) { u32 il,ir,t0,t1; /* temporary valiables */ @@ -1557,7 +1459,7 @@ static void camellia_decrypt256(const u32 *subkey, __be32 *io_text) io[2] = be32_to_cpu(io_text[2]); io[3] = be32_to_cpu(io_text[3]); - /* pre whitening but absorb kw2*/ + /* pre whitening but absorb kw2 */ io[0] ^= CAMELLIA_SUBKEY_L(32); io[1] ^= CAMELLIA_SUBKEY_R(32); @@ -1657,22 +1559,18 @@ static void camellia_decrypt256(const u32 *subkey, __be32 *io_text) io[2] ^= CAMELLIA_SUBKEY_L(0); io[3] ^= CAMELLIA_SUBKEY_R(0); - t0 = io[0]; - t1 = io[1]; - io[0] = io[2]; - io[1] = io[3]; - io[2] = t0; - io[3] = t1; - - io_text[0] = cpu_to_be32(io[0]); - io_text[1] = cpu_to_be32(io[1]); - io_text[2] = cpu_to_be32(io[2]); - io_text[3] = cpu_to_be32(io[3]); - - return; + io_text[0] = cpu_to_be32(io[2]); + io_text[1] = cpu_to_be32(io[3]); + io_text[2] = cpu_to_be32(io[0]); + io_text[3] = cpu_to_be32(io[1]); } +struct camellia_ctx { + int key_length; + u32 key_table[CAMELLIA_TABLE_BYTE_LEN / 4]; +}; + static int camellia_set_key(struct crypto_tfm *tfm, const u8 *in_key, unsigned int key_len) @@ -1688,7 +1586,7 @@ camellia_set_key(struct crypto_tfm *tfm, const u8 *in_key, cctx->key_length = key_len; - switch(key_len) { + switch (key_len) { case 16: camellia_setup128(key, cctx->key_table); break; @@ -1698,14 +1596,11 @@ camellia_set_key(struct crypto_tfm *tfm, const u8 *in_key, case 32: camellia_setup256(key, cctx->key_table); break; - default: - break; } return 0; } - static void camellia_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) { const struct camellia_ctx *cctx = crypto_tfm_ctx(tfm); @@ -1725,14 +1620,11 @@ static void camellia_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) case 32: camellia_encrypt256(cctx->key_table, tmp); break; - default: - break; } memcpy(dst, tmp, CAMELLIA_BLOCK_SIZE); } - static void camellia_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) { const struct camellia_ctx *cctx = crypto_tfm_ctx(tfm); @@ -1752,14 +1644,11 @@ static void camellia_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) case 32: camellia_decrypt256(cctx->key_table, tmp); break; - default: - break; } memcpy(dst, tmp, CAMELLIA_BLOCK_SIZE); } - static struct crypto_alg camellia_alg = { .cra_name = "camellia", .cra_driver_name = "camellia-generic", @@ -1786,16 +1675,13 @@ static int __init camellia_init(void) return crypto_register_alg(&camellia_alg); } - static void __exit camellia_fini(void) { crypto_unregister_alg(&camellia_alg); } - module_init(camellia_init); module_exit(camellia_fini); - MODULE_DESCRIPTION("Camellia Cipher Algorithm"); MODULE_LICENSE("GPL"); -- cgit v1.2.3-59-g8ed1b From 3a5e5f8108fe440657e8041afd973d2fe72180bb Mon Sep 17 00:00:00 2001 From: Denys Vlasenko Date: Tue, 6 Nov 2007 22:05:36 +0800 Subject: [CRYPTO] camellia: Code cleanup Rename some macros to shorter names: CAMELLIA_RR8 -> ROR8, making it easier to understand that it is just a right rotation, nothing camellia-specific in it. CAMELLIA_SUBKEY_L() -> SUBKEY_L() - just shorter. Move be32 <-> cpu conversions out of en/decrypt128/256 and into camellia_en/decrypt - no reason to have that code duplicated twice. Signed-off-by: Denys Vlasenko Acked-by: Noriaki TAKAMIYA Signed-off-by: Herbert Xu --- crypto/camellia.c | 935 ++++++++++++++++++++++++------------------------------ 1 file changed, 418 insertions(+), 517 deletions(-) diff --git a/crypto/camellia.c b/crypto/camellia.c index aaae60e8bf25..ac372e43e2a3 100644 --- a/crypto/camellia.c +++ b/crypto/camellia.c @@ -336,13 +336,13 @@ static const u32 camellia_sp4404[256] = { ^ ((u32)(pt)[3])) /* rotation right shift 1byte */ -#define CAMELLIA_RR8(x) (((x) >> 8) + ((x) << 24)) +#define ROR8(x) (((x) >> 8) + ((x) << 24)) /* rotation left shift 1bit */ -#define CAMELLIA_RL1(x) (((x) << 1) + ((x) >> 31)) +#define ROL1(x) (((x) << 1) + ((x) >> 31)) /* rotation left shift 1byte */ -#define CAMELLIA_RL8(x) (((x) << 8) + ((x) >> 24)) +#define ROL8(x) (((x) << 8) + ((x) >> 24)) -#define CAMELLIA_ROLDQ(ll, lr, rl, rr, w0, w1, bits) \ +#define ROLDQ(ll, lr, rl, rr, w0, w1, bits) \ do { \ w0 = ll; \ ll = (ll << bits) + (lr >> (32 - bits)); \ @@ -351,7 +351,7 @@ static const u32 camellia_sp4404[256] = { rr = (rr << bits) + (w0 >> (32 - bits)); \ } while(0) -#define CAMELLIA_ROLDQo32(ll, lr, rl, rr, w0, w1, bits) \ +#define ROLDQo32(ll, lr, rl, rr, w0, w1, bits) \ do { \ w0 = ll; \ w1 = lr; \ @@ -377,7 +377,7 @@ static const u32 camellia_sp4404[256] = { ^ camellia_sp3033[(il >> 8) & 0xff] \ ^ camellia_sp4404[il & 0xff]; \ yl ^= yr; \ - yr = CAMELLIA_RR8(yr); \ + yr = ROR8(yr); \ yr ^= yl; \ } while(0) @@ -393,13 +393,13 @@ static const u32 camellia_sp4404[256] = { t0 &= ll; \ t2 |= rr; \ rl ^= t2; \ - lr ^= CAMELLIA_RL1(t0); \ + lr ^= ROL1(t0); \ t3 = krl; \ t1 = klr; \ t3 &= rl; \ t1 |= lr; \ ll ^= t1; \ - rr ^= CAMELLIA_RL1(t3); \ + rr ^= ROL1(t3); \ } while(0) #define CAMELLIA_ROUNDSM(xl, xr, kl, kr, yl, yr, il, ir, t0, t1) \ @@ -415,12 +415,12 @@ static const u32 camellia_sp4404[256] = { il ^= kl; \ ir ^= il ^ kr; \ yl ^= ir; \ - yr ^= CAMELLIA_RR8(il) ^ ir; \ + yr ^= ROR8(il) ^ ir; \ } while(0) -#define CAMELLIA_SUBKEY_L(INDEX) (subkey[(INDEX)*2]) -#define CAMELLIA_SUBKEY_R(INDEX) (subkey[(INDEX)*2 + 1]) +#define SUBKEY_L(INDEX) (subkey[(INDEX)*2]) +#define SUBKEY_R(INDEX) (subkey[(INDEX)*2 + 1]) static void camellia_setup128(const unsigned char *key, u32 *subkey) { @@ -445,35 +445,35 @@ static void camellia_setup128(const unsigned char *key, u32 *subkey) /* kw2 */ subL[1] = krl; subR[1] = krr; /* rotation left shift 15bit */ - CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 15); + ROLDQ(kll, klr, krl, krr, w0, w1, 15); /* k3 */ subL[4] = kll; subR[4] = klr; /* k4 */ subL[5] = krl; subR[5] = krr; /* rotation left shift 15+30bit */ - CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 30); + ROLDQ(kll, klr, krl, krr, w0, w1, 30); /* k7 */ subL[10] = kll; subR[10] = klr; /* k8 */ subL[11] = krl; subR[11] = krr; /* rotation left shift 15+30+15bit */ - CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 15); + ROLDQ(kll, klr, krl, krr, w0, w1, 15); /* k10 */ subL[13] = krl; subR[13] = krr; /* rotation left shift 15+30+15+17 bit */ - CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 17); + ROLDQ(kll, klr, krl, krr, w0, w1, 17); /* kl3 */ subL[16] = kll; subR[16] = klr; /* kl4 */ subL[17] = krl; subR[17] = krr; /* rotation left shift 15+30+15+17+17 bit */ - CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 17); + ROLDQ(kll, klr, krl, krr, w0, w1, 17); /* k13 */ subL[18] = kll; subR[18] = klr; /* k14 */ subL[19] = krl; subR[19] = krr; /* rotation left shift 15+30+15+17+17+17 bit */ - CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 17); + ROLDQ(kll, klr, krl, krr, w0, w1, 17); /* k17 */ subL[22] = kll; subR[22] = klr; /* k18 */ @@ -503,26 +503,26 @@ static void camellia_setup128(const unsigned char *key, u32 *subkey) /* k1, k2 */ subL[2] = kll; subR[2] = klr; subL[3] = krl; subR[3] = krr; - CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 15); + ROLDQ(kll, klr, krl, krr, w0, w1, 15); /* k5,k6 */ subL[6] = kll; subR[6] = klr; subL[7] = krl; subR[7] = krr; - CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 15); + ROLDQ(kll, klr, krl, krr, w0, w1, 15); /* kl1, kl2 */ subL[8] = kll; subR[8] = klr; subL[9] = krl; subR[9] = krr; - CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 15); + ROLDQ(kll, klr, krl, krr, w0, w1, 15); /* k9 */ subL[12] = kll; subR[12] = klr; - CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 15); + ROLDQ(kll, klr, krl, krr, w0, w1, 15); /* k11, k12 */ subL[14] = kll; subR[14] = klr; subL[15] = krl; subR[15] = krr; - CAMELLIA_ROLDQo32(kll, klr, krl, krr, w0, w1, 34); + ROLDQo32(kll, klr, krl, krr, w0, w1, 34); /* k15, k16 */ subL[20] = kll; subR[20] = klr; subL[21] = krl; subR[21] = krr; - CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 17); + ROLDQ(kll, klr, krl, krr, w0, w1, 17); /* kw3, kw4 */ subL[24] = kll; subR[24] = klr; subL[25] = krl; subR[25] = krr; @@ -536,7 +536,7 @@ static void camellia_setup128(const unsigned char *key, u32 *subkey) subL[7] ^= subL[1]; subR[7] ^= subR[1]; subL[1] ^= subR[1] & ~subR[9]; dw = subL[1] & subL[9], - subR[1] ^= CAMELLIA_RL1(dw); /* modified for FLinv(kl2) */ + subR[1] ^= ROL1(dw); /* modified for FLinv(kl2) */ /* round 8 */ subL[11] ^= subL[1]; subR[11] ^= subR[1]; /* round 10 */ @@ -545,7 +545,7 @@ static void camellia_setup128(const unsigned char *key, u32 *subkey) subL[15] ^= subL[1]; subR[15] ^= subR[1]; subL[1] ^= subR[1] & ~subR[17]; dw = subL[1] & subL[17], - subR[1] ^= CAMELLIA_RL1(dw); /* modified for FLinv(kl4) */ + subR[1] ^= ROL1(dw); /* modified for FLinv(kl4) */ /* round 14 */ subL[19] ^= subL[1]; subR[19] ^= subR[1]; /* round 16 */ @@ -565,7 +565,7 @@ static void camellia_setup128(const unsigned char *key, u32 *subkey) subL[18] ^= kw4l; subR[18] ^= kw4r; kw4l ^= kw4r & ~subR[16]; dw = kw4l & subL[16], - kw4r ^= CAMELLIA_RL1(dw); /* modified for FL(kl3) */ + kw4r ^= ROL1(dw); /* modified for FL(kl3) */ /* round 11 */ subL[14] ^= kw4l; subR[14] ^= kw4r; /* round 9 */ @@ -574,7 +574,7 @@ static void camellia_setup128(const unsigned char *key, u32 *subkey) subL[10] ^= kw4l; subR[10] ^= kw4r; kw4l ^= kw4r & ~subR[8]; dw = kw4l & subL[8], - kw4r ^= CAMELLIA_RL1(dw); /* modified for FL(kl1) */ + kw4r ^= ROL1(dw); /* modified for FL(kl1) */ /* round 5 */ subL[6] ^= kw4l; subR[6] ^= kw4r; /* round 3 */ @@ -585,140 +585,104 @@ static void camellia_setup128(const unsigned char *key, u32 *subkey) subL[0] ^= kw4l; subR[0] ^= kw4r; /* key XOR is end of F-function */ - CAMELLIA_SUBKEY_L(0) = subL[0] ^ subL[2];/* kw1 */ - CAMELLIA_SUBKEY_R(0) = subR[0] ^ subR[2]; - CAMELLIA_SUBKEY_L(2) = subL[3]; /* round 1 */ - CAMELLIA_SUBKEY_R(2) = subR[3]; - CAMELLIA_SUBKEY_L(3) = subL[2] ^ subL[4]; /* round 2 */ - CAMELLIA_SUBKEY_R(3) = subR[2] ^ subR[4]; - CAMELLIA_SUBKEY_L(4) = subL[3] ^ subL[5]; /* round 3 */ - CAMELLIA_SUBKEY_R(4) = subR[3] ^ subR[5]; - CAMELLIA_SUBKEY_L(5) = subL[4] ^ subL[6]; /* round 4 */ - CAMELLIA_SUBKEY_R(5) = subR[4] ^ subR[6]; - CAMELLIA_SUBKEY_L(6) = subL[5] ^ subL[7]; /* round 5 */ - CAMELLIA_SUBKEY_R(6) = subR[5] ^ subR[7]; + SUBKEY_L(0) = subL[0] ^ subL[2];/* kw1 */ + SUBKEY_R(0) = subR[0] ^ subR[2]; + SUBKEY_L(2) = subL[3]; /* round 1 */ + SUBKEY_R(2) = subR[3]; + SUBKEY_L(3) = subL[2] ^ subL[4]; /* round 2 */ + SUBKEY_R(3) = subR[2] ^ subR[4]; + SUBKEY_L(4) = subL[3] ^ subL[5]; /* round 3 */ + SUBKEY_R(4) = subR[3] ^ subR[5]; + SUBKEY_L(5) = subL[4] ^ subL[6]; /* round 4 */ + SUBKEY_R(5) = subR[4] ^ subR[6]; + SUBKEY_L(6) = subL[5] ^ subL[7]; /* round 5 */ + SUBKEY_R(6) = subR[5] ^ subR[7]; tl = subL[10] ^ (subR[10] & ~subR[8]); dw = tl & subL[8], /* FL(kl1) */ - tr = subR[10] ^ CAMELLIA_RL1(dw); - CAMELLIA_SUBKEY_L(7) = subL[6] ^ tl; /* round 6 */ - CAMELLIA_SUBKEY_R(7) = subR[6] ^ tr; - CAMELLIA_SUBKEY_L(8) = subL[8]; /* FL(kl1) */ - CAMELLIA_SUBKEY_R(8) = subR[8]; - CAMELLIA_SUBKEY_L(9) = subL[9]; /* FLinv(kl2) */ - CAMELLIA_SUBKEY_R(9) = subR[9]; + tr = subR[10] ^ ROL1(dw); + SUBKEY_L(7) = subL[6] ^ tl; /* round 6 */ + SUBKEY_R(7) = subR[6] ^ tr; + SUBKEY_L(8) = subL[8]; /* FL(kl1) */ + SUBKEY_R(8) = subR[8]; + SUBKEY_L(9) = subL[9]; /* FLinv(kl2) */ + SUBKEY_R(9) = subR[9]; tl = subL[7] ^ (subR[7] & ~subR[9]); dw = tl & subL[9], /* FLinv(kl2) */ - tr = subR[7] ^ CAMELLIA_RL1(dw); - CAMELLIA_SUBKEY_L(10) = tl ^ subL[11]; /* round 7 */ - CAMELLIA_SUBKEY_R(10) = tr ^ subR[11]; - CAMELLIA_SUBKEY_L(11) = subL[10] ^ subL[12]; /* round 8 */ - CAMELLIA_SUBKEY_R(11) = subR[10] ^ subR[12]; - CAMELLIA_SUBKEY_L(12) = subL[11] ^ subL[13]; /* round 9 */ - CAMELLIA_SUBKEY_R(12) = subR[11] ^ subR[13]; - CAMELLIA_SUBKEY_L(13) = subL[12] ^ subL[14]; /* round 10 */ - CAMELLIA_SUBKEY_R(13) = subR[12] ^ subR[14]; - CAMELLIA_SUBKEY_L(14) = subL[13] ^ subL[15]; /* round 11 */ - CAMELLIA_SUBKEY_R(14) = subR[13] ^ subR[15]; + tr = subR[7] ^ ROL1(dw); + SUBKEY_L(10) = tl ^ subL[11]; /* round 7 */ + SUBKEY_R(10) = tr ^ subR[11]; + SUBKEY_L(11) = subL[10] ^ subL[12]; /* round 8 */ + SUBKEY_R(11) = subR[10] ^ subR[12]; + SUBKEY_L(12) = subL[11] ^ subL[13]; /* round 9 */ + SUBKEY_R(12) = subR[11] ^ subR[13]; + SUBKEY_L(13) = subL[12] ^ subL[14]; /* round 10 */ + SUBKEY_R(13) = subR[12] ^ subR[14]; + SUBKEY_L(14) = subL[13] ^ subL[15]; /* round 11 */ + SUBKEY_R(14) = subR[13] ^ subR[15]; tl = subL[18] ^ (subR[18] & ~subR[16]); dw = tl & subL[16], /* FL(kl3) */ - tr = subR[18] ^ CAMELLIA_RL1(dw); - CAMELLIA_SUBKEY_L(15) = subL[14] ^ tl; /* round 12 */ - CAMELLIA_SUBKEY_R(15) = subR[14] ^ tr; - CAMELLIA_SUBKEY_L(16) = subL[16]; /* FL(kl3) */ - CAMELLIA_SUBKEY_R(16) = subR[16]; - CAMELLIA_SUBKEY_L(17) = subL[17]; /* FLinv(kl4) */ - CAMELLIA_SUBKEY_R(17) = subR[17]; + tr = subR[18] ^ ROL1(dw); + SUBKEY_L(15) = subL[14] ^ tl; /* round 12 */ + SUBKEY_R(15) = subR[14] ^ tr; + SUBKEY_L(16) = subL[16]; /* FL(kl3) */ + SUBKEY_R(16) = subR[16]; + SUBKEY_L(17) = subL[17]; /* FLinv(kl4) */ + SUBKEY_R(17) = subR[17]; tl = subL[15] ^ (subR[15] & ~subR[17]); dw = tl & subL[17], /* FLinv(kl4) */ - tr = subR[15] ^ CAMELLIA_RL1(dw); - CAMELLIA_SUBKEY_L(18) = tl ^ subL[19]; /* round 13 */ - CAMELLIA_SUBKEY_R(18) = tr ^ subR[19]; - CAMELLIA_SUBKEY_L(19) = subL[18] ^ subL[20]; /* round 14 */ - CAMELLIA_SUBKEY_R(19) = subR[18] ^ subR[20]; - CAMELLIA_SUBKEY_L(20) = subL[19] ^ subL[21]; /* round 15 */ - CAMELLIA_SUBKEY_R(20) = subR[19] ^ subR[21]; - CAMELLIA_SUBKEY_L(21) = subL[20] ^ subL[22]; /* round 16 */ - CAMELLIA_SUBKEY_R(21) = subR[20] ^ subR[22]; - CAMELLIA_SUBKEY_L(22) = subL[21] ^ subL[23]; /* round 17 */ - CAMELLIA_SUBKEY_R(22) = subR[21] ^ subR[23]; - CAMELLIA_SUBKEY_L(23) = subL[22]; /* round 18 */ - CAMELLIA_SUBKEY_R(23) = subR[22]; - CAMELLIA_SUBKEY_L(24) = subL[24] ^ subL[23]; /* kw3 */ - CAMELLIA_SUBKEY_R(24) = subR[24] ^ subR[23]; + tr = subR[15] ^ ROL1(dw); + SUBKEY_L(18) = tl ^ subL[19]; /* round 13 */ + SUBKEY_R(18) = tr ^ subR[19]; + SUBKEY_L(19) = subL[18] ^ subL[20]; /* round 14 */ + SUBKEY_R(19) = subR[18] ^ subR[20]; + SUBKEY_L(20) = subL[19] ^ subL[21]; /* round 15 */ + SUBKEY_R(20) = subR[19] ^ subR[21]; + SUBKEY_L(21) = subL[20] ^ subL[22]; /* round 16 */ + SUBKEY_R(21) = subR[20] ^ subR[22]; + SUBKEY_L(22) = subL[21] ^ subL[23]; /* round 17 */ + SUBKEY_R(22) = subR[21] ^ subR[23]; + SUBKEY_L(23) = subL[22]; /* round 18 */ + SUBKEY_R(23) = subR[22]; + SUBKEY_L(24) = subL[24] ^ subL[23]; /* kw3 */ + SUBKEY_R(24) = subR[24] ^ subR[23]; /* apply the inverse of the last half of P-function */ - dw = CAMELLIA_SUBKEY_L(2) ^ CAMELLIA_SUBKEY_R(2), - dw = CAMELLIA_RL8(dw);/* round 1 */ - CAMELLIA_SUBKEY_R(2) = CAMELLIA_SUBKEY_L(2) ^ dw, - CAMELLIA_SUBKEY_L(2) = dw; - dw = CAMELLIA_SUBKEY_L(3) ^ CAMELLIA_SUBKEY_R(3), - dw = CAMELLIA_RL8(dw);/* round 2 */ - CAMELLIA_SUBKEY_R(3) = CAMELLIA_SUBKEY_L(3) ^ dw, - CAMELLIA_SUBKEY_L(3) = dw; - dw = CAMELLIA_SUBKEY_L(4) ^ CAMELLIA_SUBKEY_R(4), - dw = CAMELLIA_RL8(dw);/* round 3 */ - CAMELLIA_SUBKEY_R(4) = CAMELLIA_SUBKEY_L(4) ^ dw, - CAMELLIA_SUBKEY_L(4) = dw; - dw = CAMELLIA_SUBKEY_L(5) ^ CAMELLIA_SUBKEY_R(5), - dw = CAMELLIA_RL8(dw);/* round 4 */ - CAMELLIA_SUBKEY_R(5) = CAMELLIA_SUBKEY_L(5) ^ dw, - CAMELLIA_SUBKEY_L(5) = dw; - dw = CAMELLIA_SUBKEY_L(6) ^ CAMELLIA_SUBKEY_R(6), - dw = CAMELLIA_RL8(dw);/* round 5 */ - CAMELLIA_SUBKEY_R(6) = CAMELLIA_SUBKEY_L(6) ^ dw, - CAMELLIA_SUBKEY_L(6) = dw; - dw = CAMELLIA_SUBKEY_L(7) ^ CAMELLIA_SUBKEY_R(7), - dw = CAMELLIA_RL8(dw);/* round 6 */ - CAMELLIA_SUBKEY_R(7) = CAMELLIA_SUBKEY_L(7) ^ dw, - CAMELLIA_SUBKEY_L(7) = dw; - dw = CAMELLIA_SUBKEY_L(10) ^ CAMELLIA_SUBKEY_R(10), - dw = CAMELLIA_RL8(dw);/* round 7 */ - CAMELLIA_SUBKEY_R(10) = CAMELLIA_SUBKEY_L(10) ^ dw, - CAMELLIA_SUBKEY_L(10) = dw; - dw = CAMELLIA_SUBKEY_L(11) ^ CAMELLIA_SUBKEY_R(11), - dw = CAMELLIA_RL8(dw);/* round 8 */ - CAMELLIA_SUBKEY_R(11) = CAMELLIA_SUBKEY_L(11) ^ dw, - CAMELLIA_SUBKEY_L(11) = dw; - dw = CAMELLIA_SUBKEY_L(12) ^ CAMELLIA_SUBKEY_R(12), - dw = CAMELLIA_RL8(dw);/* round 9 */ - CAMELLIA_SUBKEY_R(12) = CAMELLIA_SUBKEY_L(12) ^ dw, - CAMELLIA_SUBKEY_L(12) = dw; - dw = CAMELLIA_SUBKEY_L(13) ^ CAMELLIA_SUBKEY_R(13), - dw = CAMELLIA_RL8(dw);/* round 10 */ - CAMELLIA_SUBKEY_R(13) = CAMELLIA_SUBKEY_L(13) ^ dw, - CAMELLIA_SUBKEY_L(13) = dw; - dw = CAMELLIA_SUBKEY_L(14) ^ CAMELLIA_SUBKEY_R(14), - dw = CAMELLIA_RL8(dw);/* round 11 */ - CAMELLIA_SUBKEY_R(14) = CAMELLIA_SUBKEY_L(14) ^ dw, - CAMELLIA_SUBKEY_L(14) = dw; - dw = CAMELLIA_SUBKEY_L(15) ^ CAMELLIA_SUBKEY_R(15), - dw = CAMELLIA_RL8(dw);/* round 12 */ - CAMELLIA_SUBKEY_R(15) = CAMELLIA_SUBKEY_L(15) ^ dw, - CAMELLIA_SUBKEY_L(15) = dw; - dw = CAMELLIA_SUBKEY_L(18) ^ CAMELLIA_SUBKEY_R(18), - dw = CAMELLIA_RL8(dw);/* round 13 */ - CAMELLIA_SUBKEY_R(18) = CAMELLIA_SUBKEY_L(18) ^ dw, - CAMELLIA_SUBKEY_L(18) = dw; - dw = CAMELLIA_SUBKEY_L(19) ^ CAMELLIA_SUBKEY_R(19), - dw = CAMELLIA_RL8(dw);/* round 14 */ - CAMELLIA_SUBKEY_R(19) = CAMELLIA_SUBKEY_L(19) ^ dw, - CAMELLIA_SUBKEY_L(19) = dw; - dw = CAMELLIA_SUBKEY_L(20) ^ CAMELLIA_SUBKEY_R(20), - dw = CAMELLIA_RL8(dw);/* round 15 */ - CAMELLIA_SUBKEY_R(20) = CAMELLIA_SUBKEY_L(20) ^ dw, - CAMELLIA_SUBKEY_L(20) = dw; - dw = CAMELLIA_SUBKEY_L(21) ^ CAMELLIA_SUBKEY_R(21), - dw = CAMELLIA_RL8(dw);/* round 16 */ - CAMELLIA_SUBKEY_R(21) = CAMELLIA_SUBKEY_L(21) ^ dw, - CAMELLIA_SUBKEY_L(21) = dw; - dw = CAMELLIA_SUBKEY_L(22) ^ CAMELLIA_SUBKEY_R(22), - dw = CAMELLIA_RL8(dw);/* round 17 */ - CAMELLIA_SUBKEY_R(22) = CAMELLIA_SUBKEY_L(22) ^ dw, - CAMELLIA_SUBKEY_L(22) = dw; - dw = CAMELLIA_SUBKEY_L(23) ^ CAMELLIA_SUBKEY_R(23), - dw = CAMELLIA_RL8(dw);/* round 18 */ - CAMELLIA_SUBKEY_R(23) = CAMELLIA_SUBKEY_L(23) ^ dw, - CAMELLIA_SUBKEY_L(23) = dw; + dw = SUBKEY_L(2) ^ SUBKEY_R(2); dw = ROL8(dw);/* round 1 */ + SUBKEY_R(2) = SUBKEY_L(2) ^ dw; SUBKEY_L(2) = dw; + dw = SUBKEY_L(3) ^ SUBKEY_R(3); dw = ROL8(dw);/* round 2 */ + SUBKEY_R(3) = SUBKEY_L(3) ^ dw; SUBKEY_L(3) = dw; + dw = SUBKEY_L(4) ^ SUBKEY_R(4); dw = ROL8(dw);/* round 3 */ + SUBKEY_R(4) = SUBKEY_L(4) ^ dw; SUBKEY_L(4) = dw; + dw = SUBKEY_L(5) ^ SUBKEY_R(5); dw = ROL8(dw);/* round 4 */ + SUBKEY_R(5) = SUBKEY_L(5) ^ dw; SUBKEY_L(5) = dw; + dw = SUBKEY_L(6) ^ SUBKEY_R(6); dw = ROL8(dw);/* round 5 */ + SUBKEY_R(6) = SUBKEY_L(6) ^ dw; SUBKEY_L(6) = dw; + dw = SUBKEY_L(7) ^ SUBKEY_R(7); dw = ROL8(dw);/* round 6 */ + SUBKEY_R(7) = SUBKEY_L(7) ^ dw; SUBKEY_L(7) = dw; + dw = SUBKEY_L(10) ^ SUBKEY_R(10); dw = ROL8(dw);/* round 7 */ + SUBKEY_R(10) = SUBKEY_L(10) ^ dw; SUBKEY_L(10) = dw; + dw = SUBKEY_L(11) ^ SUBKEY_R(11); dw = ROL8(dw);/* round 8 */ + SUBKEY_R(11) = SUBKEY_L(11) ^ dw; SUBKEY_L(11) = dw; + dw = SUBKEY_L(12) ^ SUBKEY_R(12); dw = ROL8(dw);/* round 9 */ + SUBKEY_R(12) = SUBKEY_L(12) ^ dw; SUBKEY_L(12) = dw; + dw = SUBKEY_L(13) ^ SUBKEY_R(13); dw = ROL8(dw);/* round 10 */ + SUBKEY_R(13) = SUBKEY_L(13) ^ dw; SUBKEY_L(13) = dw; + dw = SUBKEY_L(14) ^ SUBKEY_R(14); dw = ROL8(dw);/* round 11 */ + SUBKEY_R(14) = SUBKEY_L(14) ^ dw; SUBKEY_L(14) = dw; + dw = SUBKEY_L(15) ^ SUBKEY_R(15); dw = ROL8(dw);/* round 12 */ + SUBKEY_R(15) = SUBKEY_L(15) ^ dw; SUBKEY_L(15) = dw; + dw = SUBKEY_L(18) ^ SUBKEY_R(18); dw = ROL8(dw);/* round 13 */ + SUBKEY_R(18) = SUBKEY_L(18) ^ dw; SUBKEY_L(18) = dw; + dw = SUBKEY_L(19) ^ SUBKEY_R(19); dw = ROL8(dw);/* round 14 */ + SUBKEY_R(19) = SUBKEY_L(19) ^ dw; SUBKEY_L(19) = dw; + dw = SUBKEY_L(20) ^ SUBKEY_R(20); dw = ROL8(dw);/* round 15 */ + SUBKEY_R(20) = SUBKEY_L(20) ^ dw; SUBKEY_L(20) = dw; + dw = SUBKEY_L(21) ^ SUBKEY_R(21); dw = ROL8(dw);/* round 16 */ + SUBKEY_R(21) = SUBKEY_L(21) ^ dw; SUBKEY_L(21) = dw; + dw = SUBKEY_L(22) ^ SUBKEY_R(22); dw = ROL8(dw);/* round 17 */ + SUBKEY_R(22) = SUBKEY_L(22) ^ dw; SUBKEY_L(22) = dw; + dw = SUBKEY_L(23) ^ SUBKEY_R(23); dw = ROL8(dw);/* round 18 */ + SUBKEY_R(23) = SUBKEY_L(23) ^ dw; SUBKEY_L(23) = dw; } static void camellia_setup256(const unsigned char *key, u32 *subkey) @@ -734,7 +698,6 @@ static void camellia_setup256(const unsigned char *key, u32 *subkey) * key = (kll || klr || krl || krr || krll || krlr || krrl || krrr) * (|| is concatination) */ - kll = GETU32(key ); klr = GETU32(key + 4); krl = GETU32(key + 8); @@ -749,49 +712,49 @@ static void camellia_setup256(const unsigned char *key, u32 *subkey) subL[0] = kll; subR[0] = klr; /* kw2 */ subL[1] = krl; subR[1] = krr; - CAMELLIA_ROLDQo32(kll, klr, krl, krr, w0, w1, 45); + ROLDQo32(kll, klr, krl, krr, w0, w1, 45); /* k9 */ subL[12] = kll; subR[12] = klr; /* k10 */ subL[13] = krl; subR[13] = krr; - CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 15); + ROLDQ(kll, klr, krl, krr, w0, w1, 15); /* kl3 */ subL[16] = kll; subR[16] = klr; /* kl4 */ subL[17] = krl; subR[17] = krr; - CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 17); + ROLDQ(kll, klr, krl, krr, w0, w1, 17); /* k17 */ subL[22] = kll; subR[22] = klr; /* k18 */ subL[23] = krl; subR[23] = krr; - CAMELLIA_ROLDQo32(kll, klr, krl, krr, w0, w1, 34); + ROLDQo32(kll, klr, krl, krr, w0, w1, 34); /* k23 */ subL[30] = kll; subR[30] = klr; /* k24 */ subL[31] = krl; subR[31] = krr; /* generate KR dependent subkeys */ - CAMELLIA_ROLDQ(krll, krlr, krrl, krrr, w0, w1, 15); + ROLDQ(krll, krlr, krrl, krrr, w0, w1, 15); /* k3 */ subL[4] = krll; subR[4] = krlr; /* k4 */ subL[5] = krrl; subR[5] = krrr; - CAMELLIA_ROLDQ(krll, krlr, krrl, krrr, w0, w1, 15); + ROLDQ(krll, krlr, krrl, krrr, w0, w1, 15); /* kl1 */ subL[8] = krll; subR[8] = krlr; /* kl2 */ subL[9] = krrl; subR[9] = krrr; - CAMELLIA_ROLDQ(krll, krlr, krrl, krrr, w0, w1, 30); + ROLDQ(krll, krlr, krrl, krrr, w0, w1, 30); /* k13 */ subL[18] = krll; subR[18] = krlr; /* k14 */ subL[19] = krrl; subR[19] = krrr; - CAMELLIA_ROLDQo32(krll, krlr, krrl, krrr, w0, w1, 34); + ROLDQo32(krll, krlr, krrl, krrr, w0, w1, 34); /* k19 */ subL[26] = krll; subR[26] = krlr; /* k20 */ subL[27] = krrl; subR[27] = krrr; - CAMELLIA_ROLDQo32(krll, krlr, krrl, krrr, w0, w1, 34); + ROLDQo32(krll, krlr, krrl, krrr, w0, w1, 34); /* generate KA */ kll = subL[0] ^ krll; klr = subR[0] ^ krlr; @@ -826,12 +789,12 @@ static void camellia_setup256(const unsigned char *key, u32 *subkey) krll ^= w0; krlr ^= w1; /* generate KA dependent subkeys */ - CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 15); + ROLDQ(kll, klr, krl, krr, w0, w1, 15); /* k5 */ subL[6] = kll; subR[6] = klr; /* k6 */ subL[7] = krl; subR[7] = krr; - CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 30); + ROLDQ(kll, klr, krl, krr, w0, w1, 30); /* k11 */ subL[14] = kll; subR[14] = klr; /* k12 */ @@ -842,7 +805,7 @@ static void camellia_setup256(const unsigned char *key, u32 *subkey) /* kl6 */ subL[25] = krr; subR[25] = kll; /* rotation left shift 49 from k11,k12 -> k21,k22 */ - CAMELLIA_ROLDQo32(kll, klr, krl, krr, w0, w1, 49); + ROLDQo32(kll, klr, krl, krr, w0, w1, 49); /* k21 */ subL[28] = kll; subR[28] = klr; /* k22 */ @@ -853,17 +816,17 @@ static void camellia_setup256(const unsigned char *key, u32 *subkey) subL[2] = krll; subR[2] = krlr; /* k2 */ subL[3] = krrl; subR[3] = krrr; - CAMELLIA_ROLDQ(krll, krlr, krrl, krrr, w0, w1, 30); + ROLDQ(krll, krlr, krrl, krrr, w0, w1, 30); /* k7 */ subL[10] = krll; subR[10] = krlr; /* k8 */ subL[11] = krrl; subR[11] = krrr; - CAMELLIA_ROLDQ(krll, krlr, krrl, krrr, w0, w1, 30); + ROLDQ(krll, krlr, krrl, krrr, w0, w1, 30); /* k15 */ subL[20] = krll; subR[20] = krlr; /* k16 */ subL[21] = krrl; subR[21] = krrr; - CAMELLIA_ROLDQo32(krll, krlr, krrl, krrr, w0, w1, 51); + ROLDQo32(krll, krlr, krrl, krrr, w0, w1, 51); /* kw3 */ subL[32] = krll; subR[32] = krlr; /* kw4 */ @@ -878,7 +841,7 @@ static void camellia_setup256(const unsigned char *key, u32 *subkey) subL[7] ^= subL[1]; subR[7] ^= subR[1]; subL[1] ^= subR[1] & ~subR[9]; dw = subL[1] & subL[9], - subR[1] ^= CAMELLIA_RL1(dw); /* modified for FLinv(kl2) */ + subR[1] ^= ROL1(dw); /* modified for FLinv(kl2) */ /* round 8 */ subL[11] ^= subL[1]; subR[11] ^= subR[1]; /* round 10 */ @@ -887,7 +850,7 @@ static void camellia_setup256(const unsigned char *key, u32 *subkey) subL[15] ^= subL[1]; subR[15] ^= subR[1]; subL[1] ^= subR[1] & ~subR[17]; dw = subL[1] & subL[17], - subR[1] ^= CAMELLIA_RL1(dw); /* modified for FLinv(kl4) */ + subR[1] ^= ROL1(dw); /* modified for FLinv(kl4) */ /* round 14 */ subL[19] ^= subL[1]; subR[19] ^= subR[1]; /* round 16 */ @@ -896,7 +859,7 @@ static void camellia_setup256(const unsigned char *key, u32 *subkey) subL[23] ^= subL[1]; subR[23] ^= subR[1]; subL[1] ^= subR[1] & ~subR[25]; dw = subL[1] & subL[25], - subR[1] ^= CAMELLIA_RL1(dw); /* modified for FLinv(kl6) */ + subR[1] ^= ROL1(dw); /* modified for FLinv(kl6) */ /* round 20 */ subL[27] ^= subL[1]; subR[27] ^= subR[1]; /* round 22 */ @@ -916,7 +879,7 @@ static void camellia_setup256(const unsigned char *key, u32 *subkey) subL[26] ^= kw4l; subR[26] ^= kw4r; kw4l ^= kw4r & ~subR[24]; dw = kw4l & subL[24], - kw4r ^= CAMELLIA_RL1(dw); /* modified for FL(kl5) */ + kw4r ^= ROL1(dw); /* modified for FL(kl5) */ /* round 17 */ subL[22] ^= kw4l; subR[22] ^= kw4r; /* round 15 */ @@ -925,7 +888,7 @@ static void camellia_setup256(const unsigned char *key, u32 *subkey) subL[18] ^= kw4l; subR[18] ^= kw4r; kw4l ^= kw4r & ~subR[16]; dw = kw4l & subL[16], - kw4r ^= CAMELLIA_RL1(dw); /* modified for FL(kl3) */ + kw4r ^= ROL1(dw); /* modified for FL(kl3) */ /* round 11 */ subL[14] ^= kw4l; subR[14] ^= kw4r; /* round 9 */ @@ -934,7 +897,7 @@ static void camellia_setup256(const unsigned char *key, u32 *subkey) subL[10] ^= kw4l; subR[10] ^= kw4r; kw4l ^= kw4r & ~subR[8]; dw = kw4l & subL[8], - kw4r ^= CAMELLIA_RL1(dw); /* modified for FL(kl1) */ + kw4r ^= ROL1(dw); /* modified for FL(kl1) */ /* round 5 */ subL[6] ^= kw4l; subR[6] ^= kw4r; /* round 3 */ @@ -945,188 +908,138 @@ static void camellia_setup256(const unsigned char *key, u32 *subkey) subL[0] ^= kw4l; subR[0] ^= kw4r; /* key XOR is end of F-function */ - CAMELLIA_SUBKEY_L(0) = subL[0] ^ subL[2];/* kw1 */ - CAMELLIA_SUBKEY_R(0) = subR[0] ^ subR[2]; - CAMELLIA_SUBKEY_L(2) = subL[3]; /* round 1 */ - CAMELLIA_SUBKEY_R(2) = subR[3]; - CAMELLIA_SUBKEY_L(3) = subL[2] ^ subL[4]; /* round 2 */ - CAMELLIA_SUBKEY_R(3) = subR[2] ^ subR[4]; - CAMELLIA_SUBKEY_L(4) = subL[3] ^ subL[5]; /* round 3 */ - CAMELLIA_SUBKEY_R(4) = subR[3] ^ subR[5]; - CAMELLIA_SUBKEY_L(5) = subL[4] ^ subL[6]; /* round 4 */ - CAMELLIA_SUBKEY_R(5) = subR[4] ^ subR[6]; - CAMELLIA_SUBKEY_L(6) = subL[5] ^ subL[7]; /* round 5 */ - CAMELLIA_SUBKEY_R(6) = subR[5] ^ subR[7]; + SUBKEY_L(0) = subL[0] ^ subL[2];/* kw1 */ + SUBKEY_R(0) = subR[0] ^ subR[2]; + SUBKEY_L(2) = subL[3]; /* round 1 */ + SUBKEY_R(2) = subR[3]; + SUBKEY_L(3) = subL[2] ^ subL[4]; /* round 2 */ + SUBKEY_R(3) = subR[2] ^ subR[4]; + SUBKEY_L(4) = subL[3] ^ subL[5]; /* round 3 */ + SUBKEY_R(4) = subR[3] ^ subR[5]; + SUBKEY_L(5) = subL[4] ^ subL[6]; /* round 4 */ + SUBKEY_R(5) = subR[4] ^ subR[6]; + SUBKEY_L(6) = subL[5] ^ subL[7]; /* round 5 */ + SUBKEY_R(6) = subR[5] ^ subR[7]; tl = subL[10] ^ (subR[10] & ~subR[8]); dw = tl & subL[8], /* FL(kl1) */ - tr = subR[10] ^ CAMELLIA_RL1(dw); - CAMELLIA_SUBKEY_L(7) = subL[6] ^ tl; /* round 6 */ - CAMELLIA_SUBKEY_R(7) = subR[6] ^ tr; - CAMELLIA_SUBKEY_L(8) = subL[8]; /* FL(kl1) */ - CAMELLIA_SUBKEY_R(8) = subR[8]; - CAMELLIA_SUBKEY_L(9) = subL[9]; /* FLinv(kl2) */ - CAMELLIA_SUBKEY_R(9) = subR[9]; + tr = subR[10] ^ ROL1(dw); + SUBKEY_L(7) = subL[6] ^ tl; /* round 6 */ + SUBKEY_R(7) = subR[6] ^ tr; + SUBKEY_L(8) = subL[8]; /* FL(kl1) */ + SUBKEY_R(8) = subR[8]; + SUBKEY_L(9) = subL[9]; /* FLinv(kl2) */ + SUBKEY_R(9) = subR[9]; tl = subL[7] ^ (subR[7] & ~subR[9]); dw = tl & subL[9], /* FLinv(kl2) */ - tr = subR[7] ^ CAMELLIA_RL1(dw); - CAMELLIA_SUBKEY_L(10) = tl ^ subL[11]; /* round 7 */ - CAMELLIA_SUBKEY_R(10) = tr ^ subR[11]; - CAMELLIA_SUBKEY_L(11) = subL[10] ^ subL[12]; /* round 8 */ - CAMELLIA_SUBKEY_R(11) = subR[10] ^ subR[12]; - CAMELLIA_SUBKEY_L(12) = subL[11] ^ subL[13]; /* round 9 */ - CAMELLIA_SUBKEY_R(12) = subR[11] ^ subR[13]; - CAMELLIA_SUBKEY_L(13) = subL[12] ^ subL[14]; /* round 10 */ - CAMELLIA_SUBKEY_R(13) = subR[12] ^ subR[14]; - CAMELLIA_SUBKEY_L(14) = subL[13] ^ subL[15]; /* round 11 */ - CAMELLIA_SUBKEY_R(14) = subR[13] ^ subR[15]; + tr = subR[7] ^ ROL1(dw); + SUBKEY_L(10) = tl ^ subL[11]; /* round 7 */ + SUBKEY_R(10) = tr ^ subR[11]; + SUBKEY_L(11) = subL[10] ^ subL[12]; /* round 8 */ + SUBKEY_R(11) = subR[10] ^ subR[12]; + SUBKEY_L(12) = subL[11] ^ subL[13]; /* round 9 */ + SUBKEY_R(12) = subR[11] ^ subR[13]; + SUBKEY_L(13) = subL[12] ^ subL[14]; /* round 10 */ + SUBKEY_R(13) = subR[12] ^ subR[14]; + SUBKEY_L(14) = subL[13] ^ subL[15]; /* round 11 */ + SUBKEY_R(14) = subR[13] ^ subR[15]; tl = subL[18] ^ (subR[18] & ~subR[16]); dw = tl & subL[16], /* FL(kl3) */ - tr = subR[18] ^ CAMELLIA_RL1(dw); - CAMELLIA_SUBKEY_L(15) = subL[14] ^ tl; /* round 12 */ - CAMELLIA_SUBKEY_R(15) = subR[14] ^ tr; - CAMELLIA_SUBKEY_L(16) = subL[16]; /* FL(kl3) */ - CAMELLIA_SUBKEY_R(16) = subR[16]; - CAMELLIA_SUBKEY_L(17) = subL[17]; /* FLinv(kl4) */ - CAMELLIA_SUBKEY_R(17) = subR[17]; + tr = subR[18] ^ ROL1(dw); + SUBKEY_L(15) = subL[14] ^ tl; /* round 12 */ + SUBKEY_R(15) = subR[14] ^ tr; + SUBKEY_L(16) = subL[16]; /* FL(kl3) */ + SUBKEY_R(16) = subR[16]; + SUBKEY_L(17) = subL[17]; /* FLinv(kl4) */ + SUBKEY_R(17) = subR[17]; tl = subL[15] ^ (subR[15] & ~subR[17]); dw = tl & subL[17], /* FLinv(kl4) */ - tr = subR[15] ^ CAMELLIA_RL1(dw); - CAMELLIA_SUBKEY_L(18) = tl ^ subL[19]; /* round 13 */ - CAMELLIA_SUBKEY_R(18) = tr ^ subR[19]; - CAMELLIA_SUBKEY_L(19) = subL[18] ^ subL[20]; /* round 14 */ - CAMELLIA_SUBKEY_R(19) = subR[18] ^ subR[20]; - CAMELLIA_SUBKEY_L(20) = subL[19] ^ subL[21]; /* round 15 */ - CAMELLIA_SUBKEY_R(20) = subR[19] ^ subR[21]; - CAMELLIA_SUBKEY_L(21) = subL[20] ^ subL[22]; /* round 16 */ - CAMELLIA_SUBKEY_R(21) = subR[20] ^ subR[22]; - CAMELLIA_SUBKEY_L(22) = subL[21] ^ subL[23]; /* round 17 */ - CAMELLIA_SUBKEY_R(22) = subR[21] ^ subR[23]; - tl = subL[26] ^ (subR[26] - & ~subR[24]); + tr = subR[15] ^ ROL1(dw); + SUBKEY_L(18) = tl ^ subL[19]; /* round 13 */ + SUBKEY_R(18) = tr ^ subR[19]; + SUBKEY_L(19) = subL[18] ^ subL[20]; /* round 14 */ + SUBKEY_R(19) = subR[18] ^ subR[20]; + SUBKEY_L(20) = subL[19] ^ subL[21]; /* round 15 */ + SUBKEY_R(20) = subR[19] ^ subR[21]; + SUBKEY_L(21) = subL[20] ^ subL[22]; /* round 16 */ + SUBKEY_R(21) = subR[20] ^ subR[22]; + SUBKEY_L(22) = subL[21] ^ subL[23]; /* round 17 */ + SUBKEY_R(22) = subR[21] ^ subR[23]; + tl = subL[26] ^ (subR[26] & ~subR[24]); dw = tl & subL[24], /* FL(kl5) */ - tr = subR[26] ^ CAMELLIA_RL1(dw); - CAMELLIA_SUBKEY_L(23) = subL[22] ^ tl; /* round 18 */ - CAMELLIA_SUBKEY_R(23) = subR[22] ^ tr; - CAMELLIA_SUBKEY_L(24) = subL[24]; /* FL(kl5) */ - CAMELLIA_SUBKEY_R(24) = subR[24]; - CAMELLIA_SUBKEY_L(25) = subL[25]; /* FLinv(kl6) */ - CAMELLIA_SUBKEY_R(25) = subR[25]; - tl = subL[23] ^ (subR[23] & - ~subR[25]); + tr = subR[26] ^ ROL1(dw); + SUBKEY_L(23) = subL[22] ^ tl; /* round 18 */ + SUBKEY_R(23) = subR[22] ^ tr; + SUBKEY_L(24) = subL[24]; /* FL(kl5) */ + SUBKEY_R(24) = subR[24]; + SUBKEY_L(25) = subL[25]; /* FLinv(kl6) */ + SUBKEY_R(25) = subR[25]; + tl = subL[23] ^ (subR[23] & ~subR[25]); dw = tl & subL[25], /* FLinv(kl6) */ - tr = subR[23] ^ CAMELLIA_RL1(dw); - CAMELLIA_SUBKEY_L(26) = tl ^ subL[27]; /* round 19 */ - CAMELLIA_SUBKEY_R(26) = tr ^ subR[27]; - CAMELLIA_SUBKEY_L(27) = subL[26] ^ subL[28]; /* round 20 */ - CAMELLIA_SUBKEY_R(27) = subR[26] ^ subR[28]; - CAMELLIA_SUBKEY_L(28) = subL[27] ^ subL[29]; /* round 21 */ - CAMELLIA_SUBKEY_R(28) = subR[27] ^ subR[29]; - CAMELLIA_SUBKEY_L(29) = subL[28] ^ subL[30]; /* round 22 */ - CAMELLIA_SUBKEY_R(29) = subR[28] ^ subR[30]; - CAMELLIA_SUBKEY_L(30) = subL[29] ^ subL[31]; /* round 23 */ - CAMELLIA_SUBKEY_R(30) = subR[29] ^ subR[31]; - CAMELLIA_SUBKEY_L(31) = subL[30]; /* round 24 */ - CAMELLIA_SUBKEY_R(31) = subR[30]; - CAMELLIA_SUBKEY_L(32) = subL[32] ^ subL[31]; /* kw3 */ - CAMELLIA_SUBKEY_R(32) = subR[32] ^ subR[31]; + tr = subR[23] ^ ROL1(dw); + SUBKEY_L(26) = tl ^ subL[27]; /* round 19 */ + SUBKEY_R(26) = tr ^ subR[27]; + SUBKEY_L(27) = subL[26] ^ subL[28]; /* round 20 */ + SUBKEY_R(27) = subR[26] ^ subR[28]; + SUBKEY_L(28) = subL[27] ^ subL[29]; /* round 21 */ + SUBKEY_R(28) = subR[27] ^ subR[29]; + SUBKEY_L(29) = subL[28] ^ subL[30]; /* round 22 */ + SUBKEY_R(29) = subR[28] ^ subR[30]; + SUBKEY_L(30) = subL[29] ^ subL[31]; /* round 23 */ + SUBKEY_R(30) = subR[29] ^ subR[31]; + SUBKEY_L(31) = subL[30]; /* round 24 */ + SUBKEY_R(31) = subR[30]; + SUBKEY_L(32) = subL[32] ^ subL[31]; /* kw3 */ + SUBKEY_R(32) = subR[32] ^ subR[31]; /* apply the inverse of the last half of P-function */ - dw = CAMELLIA_SUBKEY_L(2) ^ CAMELLIA_SUBKEY_R(2), - dw = CAMELLIA_RL8(dw);/* round 1 */ - CAMELLIA_SUBKEY_R(2) = CAMELLIA_SUBKEY_L(2) ^ dw, - CAMELLIA_SUBKEY_L(2) = dw; - dw = CAMELLIA_SUBKEY_L(3) ^ CAMELLIA_SUBKEY_R(3), - dw = CAMELLIA_RL8(dw);/* round 2 */ - CAMELLIA_SUBKEY_R(3) = CAMELLIA_SUBKEY_L(3) ^ dw, - CAMELLIA_SUBKEY_L(3) = dw; - dw = CAMELLIA_SUBKEY_L(4) ^ CAMELLIA_SUBKEY_R(4), - dw = CAMELLIA_RL8(dw);/* round 3 */ - CAMELLIA_SUBKEY_R(4) = CAMELLIA_SUBKEY_L(4) ^ dw, - CAMELLIA_SUBKEY_L(4) = dw; - dw = CAMELLIA_SUBKEY_L(5) ^ CAMELLIA_SUBKEY_R(5), - dw = CAMELLIA_RL8(dw);/* round 4 */ - CAMELLIA_SUBKEY_R(5) = CAMELLIA_SUBKEY_L(5) ^ dw, - CAMELLIA_SUBKEY_L(5) = dw; - dw = CAMELLIA_SUBKEY_L(6) ^ CAMELLIA_SUBKEY_R(6), - dw = CAMELLIA_RL8(dw);/* round 5 */ - CAMELLIA_SUBKEY_R(6) = CAMELLIA_SUBKEY_L(6) ^ dw, - CAMELLIA_SUBKEY_L(6) = dw; - dw = CAMELLIA_SUBKEY_L(7) ^ CAMELLIA_SUBKEY_R(7), - dw = CAMELLIA_RL8(dw);/* round 6 */ - CAMELLIA_SUBKEY_R(7) = CAMELLIA_SUBKEY_L(7) ^ dw, - CAMELLIA_SUBKEY_L(7) = dw; - dw = CAMELLIA_SUBKEY_L(10) ^ CAMELLIA_SUBKEY_R(10), - dw = CAMELLIA_RL8(dw);/* round 7 */ - CAMELLIA_SUBKEY_R(10) = CAMELLIA_SUBKEY_L(10) ^ dw, - CAMELLIA_SUBKEY_L(10) = dw; - dw = CAMELLIA_SUBKEY_L(11) ^ CAMELLIA_SUBKEY_R(11), - dw = CAMELLIA_RL8(dw);/* round 8 */ - CAMELLIA_SUBKEY_R(11) = CAMELLIA_SUBKEY_L(11) ^ dw, - CAMELLIA_SUBKEY_L(11) = dw; - dw = CAMELLIA_SUBKEY_L(12) ^ CAMELLIA_SUBKEY_R(12), - dw = CAMELLIA_RL8(dw);/* round 9 */ - CAMELLIA_SUBKEY_R(12) = CAMELLIA_SUBKEY_L(12) ^ dw, - CAMELLIA_SUBKEY_L(12) = dw; - dw = CAMELLIA_SUBKEY_L(13) ^ CAMELLIA_SUBKEY_R(13), - dw = CAMELLIA_RL8(dw);/* round 10 */ - CAMELLIA_SUBKEY_R(13) = CAMELLIA_SUBKEY_L(13) ^ dw, - CAMELLIA_SUBKEY_L(13) = dw; - dw = CAMELLIA_SUBKEY_L(14) ^ CAMELLIA_SUBKEY_R(14), - dw = CAMELLIA_RL8(dw);/* round 11 */ - CAMELLIA_SUBKEY_R(14) = CAMELLIA_SUBKEY_L(14) ^ dw, - CAMELLIA_SUBKEY_L(14) = dw; - dw = CAMELLIA_SUBKEY_L(15) ^ CAMELLIA_SUBKEY_R(15), - dw = CAMELLIA_RL8(dw);/* round 12 */ - CAMELLIA_SUBKEY_R(15) = CAMELLIA_SUBKEY_L(15) ^ dw, - CAMELLIA_SUBKEY_L(15) = dw; - dw = CAMELLIA_SUBKEY_L(18) ^ CAMELLIA_SUBKEY_R(18), - dw = CAMELLIA_RL8(dw);/* round 13 */ - CAMELLIA_SUBKEY_R(18) = CAMELLIA_SUBKEY_L(18) ^ dw, - CAMELLIA_SUBKEY_L(18) = dw; - dw = CAMELLIA_SUBKEY_L(19) ^ CAMELLIA_SUBKEY_R(19), - dw = CAMELLIA_RL8(dw);/* round 14 */ - CAMELLIA_SUBKEY_R(19) = CAMELLIA_SUBKEY_L(19) ^ dw, - CAMELLIA_SUBKEY_L(19) = dw; - dw = CAMELLIA_SUBKEY_L(20) ^ CAMELLIA_SUBKEY_R(20), - dw = CAMELLIA_RL8(dw);/* round 15 */ - CAMELLIA_SUBKEY_R(20) = CAMELLIA_SUBKEY_L(20) ^ dw, - CAMELLIA_SUBKEY_L(20) = dw; - dw = CAMELLIA_SUBKEY_L(21) ^ CAMELLIA_SUBKEY_R(21), - dw = CAMELLIA_RL8(dw);/* round 16 */ - CAMELLIA_SUBKEY_R(21) = CAMELLIA_SUBKEY_L(21) ^ dw, - CAMELLIA_SUBKEY_L(21) = dw; - dw = CAMELLIA_SUBKEY_L(22) ^ CAMELLIA_SUBKEY_R(22), - dw = CAMELLIA_RL8(dw);/* round 17 */ - CAMELLIA_SUBKEY_R(22) = CAMELLIA_SUBKEY_L(22) ^ dw, - CAMELLIA_SUBKEY_L(22) = dw; - dw = CAMELLIA_SUBKEY_L(23) ^ CAMELLIA_SUBKEY_R(23), - dw = CAMELLIA_RL8(dw);/* round 18 */ - CAMELLIA_SUBKEY_R(23) = CAMELLIA_SUBKEY_L(23) ^ dw, - CAMELLIA_SUBKEY_L(23) = dw; - dw = CAMELLIA_SUBKEY_L(26) ^ CAMELLIA_SUBKEY_R(26), - dw = CAMELLIA_RL8(dw);/* round 19 */ - CAMELLIA_SUBKEY_R(26) = CAMELLIA_SUBKEY_L(26) ^ dw, - CAMELLIA_SUBKEY_L(26) = dw; - dw = CAMELLIA_SUBKEY_L(27) ^ CAMELLIA_SUBKEY_R(27), - dw = CAMELLIA_RL8(dw);/* round 20 */ - CAMELLIA_SUBKEY_R(27) = CAMELLIA_SUBKEY_L(27) ^ dw, - CAMELLIA_SUBKEY_L(27) = dw; - dw = CAMELLIA_SUBKEY_L(28) ^ CAMELLIA_SUBKEY_R(28), - dw = CAMELLIA_RL8(dw);/* round 21 */ - CAMELLIA_SUBKEY_R(28) = CAMELLIA_SUBKEY_L(28) ^ dw, - CAMELLIA_SUBKEY_L(28) = dw; - dw = CAMELLIA_SUBKEY_L(29) ^ CAMELLIA_SUBKEY_R(29), - dw = CAMELLIA_RL8(dw);/* round 22 */ - CAMELLIA_SUBKEY_R(29) = CAMELLIA_SUBKEY_L(29) ^ dw, - CAMELLIA_SUBKEY_L(29) = dw; - dw = CAMELLIA_SUBKEY_L(30) ^ CAMELLIA_SUBKEY_R(30), - dw = CAMELLIA_RL8(dw);/* round 23 */ - CAMELLIA_SUBKEY_R(30) = CAMELLIA_SUBKEY_L(30) ^ dw, - CAMELLIA_SUBKEY_L(30) = dw; - dw = CAMELLIA_SUBKEY_L(31) ^ CAMELLIA_SUBKEY_R(31), - dw = CAMELLIA_RL8(dw);/* round 24 */ - CAMELLIA_SUBKEY_R(31) = CAMELLIA_SUBKEY_L(31) ^ dw, - CAMELLIA_SUBKEY_L(31) = dw; + dw = SUBKEY_L(2) ^ SUBKEY_R(2); dw = ROL8(dw);/* round 1 */ + SUBKEY_R(2) = SUBKEY_L(2) ^ dw; SUBKEY_L(2) = dw; + dw = SUBKEY_L(3) ^ SUBKEY_R(3); dw = ROL8(dw);/* round 2 */ + SUBKEY_R(3) = SUBKEY_L(3) ^ dw; SUBKEY_L(3) = dw; + dw = SUBKEY_L(4) ^ SUBKEY_R(4); dw = ROL8(dw);/* round 3 */ + SUBKEY_R(4) = SUBKEY_L(4) ^ dw; SUBKEY_L(4) = dw; + dw = SUBKEY_L(5) ^ SUBKEY_R(5); dw = ROL8(dw);/* round 4 */ + SUBKEY_R(5) = SUBKEY_L(5) ^ dw; SUBKEY_L(5) = dw; + dw = SUBKEY_L(6) ^ SUBKEY_R(6); dw = ROL8(dw);/* round 5 */ + SUBKEY_R(6) = SUBKEY_L(6) ^ dw; SUBKEY_L(6) = dw; + dw = SUBKEY_L(7) ^ SUBKEY_R(7); dw = ROL8(dw);/* round 6 */ + SUBKEY_R(7) = SUBKEY_L(7) ^ dw; SUBKEY_L(7) = dw; + dw = SUBKEY_L(10) ^ SUBKEY_R(10); dw = ROL8(dw);/* round 7 */ + SUBKEY_R(10) = SUBKEY_L(10) ^ dw; SUBKEY_L(10) = dw; + dw = SUBKEY_L(11) ^ SUBKEY_R(11); dw = ROL8(dw);/* round 8 */ + SUBKEY_R(11) = SUBKEY_L(11) ^ dw; SUBKEY_L(11) = dw; + dw = SUBKEY_L(12) ^ SUBKEY_R(12); dw = ROL8(dw);/* round 9 */ + SUBKEY_R(12) = SUBKEY_L(12) ^ dw; SUBKEY_L(12) = dw; + dw = SUBKEY_L(13) ^ SUBKEY_R(13); dw = ROL8(dw);/* round 10 */ + SUBKEY_R(13) = SUBKEY_L(13) ^ dw; SUBKEY_L(13) = dw; + dw = SUBKEY_L(14) ^ SUBKEY_R(14); dw = ROL8(dw);/* round 11 */ + SUBKEY_R(14) = SUBKEY_L(14) ^ dw; SUBKEY_L(14) = dw; + dw = SUBKEY_L(15) ^ SUBKEY_R(15); dw = ROL8(dw);/* round 12 */ + SUBKEY_R(15) = SUBKEY_L(15) ^ dw; SUBKEY_L(15) = dw; + dw = SUBKEY_L(18) ^ SUBKEY_R(18); dw = ROL8(dw);/* round 13 */ + SUBKEY_R(18) = SUBKEY_L(18) ^ dw; SUBKEY_L(18) = dw; + dw = SUBKEY_L(19) ^ SUBKEY_R(19); dw = ROL8(dw);/* round 14 */ + SUBKEY_R(19) = SUBKEY_L(19) ^ dw; SUBKEY_L(19) = dw; + dw = SUBKEY_L(20) ^ SUBKEY_R(20); dw = ROL8(dw);/* round 15 */ + SUBKEY_R(20) = SUBKEY_L(20) ^ dw; SUBKEY_L(20) = dw; + dw = SUBKEY_L(21) ^ SUBKEY_R(21); dw = ROL8(dw);/* round 16 */ + SUBKEY_R(21) = SUBKEY_L(21) ^ dw; SUBKEY_L(21) = dw; + dw = SUBKEY_L(22) ^ SUBKEY_R(22); dw = ROL8(dw);/* round 17 */ + SUBKEY_R(22) = SUBKEY_L(22) ^ dw; SUBKEY_L(22) = dw; + dw = SUBKEY_L(23) ^ SUBKEY_R(23); dw = ROL8(dw);/* round 18 */ + SUBKEY_R(23) = SUBKEY_L(23) ^ dw; SUBKEY_L(23) = dw; + dw = SUBKEY_L(26) ^ SUBKEY_R(26); dw = ROL8(dw);/* round 19 */ + SUBKEY_R(26) = SUBKEY_L(26) ^ dw; SUBKEY_L(26) = dw; + dw = SUBKEY_L(27) ^ SUBKEY_R(27); dw = ROL8(dw);/* round 20 */ + SUBKEY_R(27) = SUBKEY_L(27) ^ dw; SUBKEY_L(27) = dw; + dw = SUBKEY_L(28) ^ SUBKEY_R(28); dw = ROL8(dw);/* round 21 */ + SUBKEY_R(28) = SUBKEY_L(28) ^ dw; SUBKEY_L(28) = dw; + dw = SUBKEY_L(29) ^ SUBKEY_R(29); dw = ROL8(dw);/* round 22 */ + SUBKEY_R(29) = SUBKEY_L(29) ^ dw; SUBKEY_L(29) = dw; + dw = SUBKEY_L(30) ^ SUBKEY_R(30); dw = ROL8(dw);/* round 23 */ + SUBKEY_R(30) = SUBKEY_L(30) ^ dw; SUBKEY_L(30) = dw; + dw = SUBKEY_L(31) ^ SUBKEY_R(31); dw = ROL8(dw);/* round 24 */ + SUBKEY_R(31) = SUBKEY_L(31) ^ dw; SUBKEY_L(31) = dw; } static void camellia_setup192(const unsigned char *key, u32 *subkey) @@ -1145,424 +1058,400 @@ static void camellia_setup192(const unsigned char *key, u32 *subkey) } -static void camellia_encrypt128(const u32 *subkey, __be32 *io_text) +static void camellia_encrypt128(const u32 *subkey, u32 *io_text) { - u32 il,ir,t0,t1; /* temporary valiables */ + u32 il,ir,t0,t1; /* temporary variables */ u32 io[4]; - io[0] = be32_to_cpu(io_text[0]); - io[1] = be32_to_cpu(io_text[1]); - io[2] = be32_to_cpu(io_text[2]); - io[3] = be32_to_cpu(io_text[3]); - /* pre whitening but absorb kw2 */ - io[0] ^= CAMELLIA_SUBKEY_L(0); - io[1] ^= CAMELLIA_SUBKEY_R(0); + io[0] = io_text[0] ^ SUBKEY_L(0); + io[1] = io_text[1] ^ SUBKEY_R(0); + io[2] = io_text[2]; + io[3] = io_text[3]; /* main iteration */ CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(2),CAMELLIA_SUBKEY_R(2), + SUBKEY_L(2),SUBKEY_R(2), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(3),CAMELLIA_SUBKEY_R(3), + SUBKEY_L(3),SUBKEY_R(3), io[0],io[1],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(4),CAMELLIA_SUBKEY_R(4), + SUBKEY_L(4),SUBKEY_R(4), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(5),CAMELLIA_SUBKEY_R(5), + SUBKEY_L(5),SUBKEY_R(5), io[0],io[1],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(6),CAMELLIA_SUBKEY_R(6), + SUBKEY_L(6),SUBKEY_R(6), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(7),CAMELLIA_SUBKEY_R(7), + SUBKEY_L(7),SUBKEY_R(7), io[0],io[1],il,ir,t0,t1); CAMELLIA_FLS(io[0],io[1],io[2],io[3], - CAMELLIA_SUBKEY_L(8),CAMELLIA_SUBKEY_R(8), - CAMELLIA_SUBKEY_L(9),CAMELLIA_SUBKEY_R(9), + SUBKEY_L(8),SUBKEY_R(8), + SUBKEY_L(9),SUBKEY_R(9), t0,t1,il,ir); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(10),CAMELLIA_SUBKEY_R(10), + SUBKEY_L(10),SUBKEY_R(10), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(11),CAMELLIA_SUBKEY_R(11), + SUBKEY_L(11),SUBKEY_R(11), io[0],io[1],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(12),CAMELLIA_SUBKEY_R(12), + SUBKEY_L(12),SUBKEY_R(12), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(13),CAMELLIA_SUBKEY_R(13), + SUBKEY_L(13),SUBKEY_R(13), io[0],io[1],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(14),CAMELLIA_SUBKEY_R(14), + SUBKEY_L(14),SUBKEY_R(14), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(15),CAMELLIA_SUBKEY_R(15), + SUBKEY_L(15),SUBKEY_R(15), io[0],io[1],il,ir,t0,t1); CAMELLIA_FLS(io[0],io[1],io[2],io[3], - CAMELLIA_SUBKEY_L(16),CAMELLIA_SUBKEY_R(16), - CAMELLIA_SUBKEY_L(17),CAMELLIA_SUBKEY_R(17), + SUBKEY_L(16),SUBKEY_R(16), + SUBKEY_L(17),SUBKEY_R(17), t0,t1,il,ir); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(18),CAMELLIA_SUBKEY_R(18), + SUBKEY_L(18),SUBKEY_R(18), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(19),CAMELLIA_SUBKEY_R(19), + SUBKEY_L(19),SUBKEY_R(19), io[0],io[1],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(20),CAMELLIA_SUBKEY_R(20), + SUBKEY_L(20),SUBKEY_R(20), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(21),CAMELLIA_SUBKEY_R(21), + SUBKEY_L(21),SUBKEY_R(21), io[0],io[1],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(22),CAMELLIA_SUBKEY_R(22), + SUBKEY_L(22),SUBKEY_R(22), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(23),CAMELLIA_SUBKEY_R(23), + SUBKEY_L(23),SUBKEY_R(23), io[0],io[1],il,ir,t0,t1); /* post whitening but kw4 */ - io[2] ^= CAMELLIA_SUBKEY_L(24); - io[3] ^= CAMELLIA_SUBKEY_R(24); - - io_text[0] = cpu_to_be32(io[2]); - io_text[1] = cpu_to_be32(io[3]); - io_text[2] = cpu_to_be32(io[0]); - io_text[3] = cpu_to_be32(io[1]); + io_text[0] = io[2] ^ SUBKEY_L(24); + io_text[1] = io[3] ^ SUBKEY_R(24); + io_text[2] = io[0]; + io_text[3] = io[1]; } -static void camellia_decrypt128(const u32 *subkey, __be32 *io_text) +static void camellia_decrypt128(const u32 *subkey, u32 *io_text) { - u32 il,ir,t0,t1; /* temporary valiables */ + u32 il,ir,t0,t1; /* temporary variables */ u32 io[4]; - io[0] = be32_to_cpu(io_text[0]); - io[1] = be32_to_cpu(io_text[1]); - io[2] = be32_to_cpu(io_text[2]); - io[3] = be32_to_cpu(io_text[3]); - /* pre whitening but absorb kw2 */ - io[0] ^= CAMELLIA_SUBKEY_L(24); - io[1] ^= CAMELLIA_SUBKEY_R(24); + io[0] = io_text[0] ^ SUBKEY_L(24); + io[1] = io_text[1] ^ SUBKEY_R(24); + io[2] = io_text[2]; + io[3] = io_text[3]; /* main iteration */ CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(23),CAMELLIA_SUBKEY_R(23), + SUBKEY_L(23),SUBKEY_R(23), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(22),CAMELLIA_SUBKEY_R(22), + SUBKEY_L(22),SUBKEY_R(22), io[0],io[1],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(21),CAMELLIA_SUBKEY_R(21), + SUBKEY_L(21),SUBKEY_R(21), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(20),CAMELLIA_SUBKEY_R(20), + SUBKEY_L(20),SUBKEY_R(20), io[0],io[1],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(19),CAMELLIA_SUBKEY_R(19), + SUBKEY_L(19),SUBKEY_R(19), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(18),CAMELLIA_SUBKEY_R(18), + SUBKEY_L(18),SUBKEY_R(18), io[0],io[1],il,ir,t0,t1); CAMELLIA_FLS(io[0],io[1],io[2],io[3], - CAMELLIA_SUBKEY_L(17),CAMELLIA_SUBKEY_R(17), - CAMELLIA_SUBKEY_L(16),CAMELLIA_SUBKEY_R(16), + SUBKEY_L(17),SUBKEY_R(17), + SUBKEY_L(16),SUBKEY_R(16), t0,t1,il,ir); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(15),CAMELLIA_SUBKEY_R(15), + SUBKEY_L(15),SUBKEY_R(15), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(14),CAMELLIA_SUBKEY_R(14), + SUBKEY_L(14),SUBKEY_R(14), io[0],io[1],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(13),CAMELLIA_SUBKEY_R(13), + SUBKEY_L(13),SUBKEY_R(13), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(12),CAMELLIA_SUBKEY_R(12), + SUBKEY_L(12),SUBKEY_R(12), io[0],io[1],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(11),CAMELLIA_SUBKEY_R(11), + SUBKEY_L(11),SUBKEY_R(11), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(10),CAMELLIA_SUBKEY_R(10), + SUBKEY_L(10),SUBKEY_R(10), io[0],io[1],il,ir,t0,t1); CAMELLIA_FLS(io[0],io[1],io[2],io[3], - CAMELLIA_SUBKEY_L(9),CAMELLIA_SUBKEY_R(9), - CAMELLIA_SUBKEY_L(8),CAMELLIA_SUBKEY_R(8), + SUBKEY_L(9),SUBKEY_R(9), + SUBKEY_L(8),SUBKEY_R(8), t0,t1,il,ir); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(7),CAMELLIA_SUBKEY_R(7), + SUBKEY_L(7),SUBKEY_R(7), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(6),CAMELLIA_SUBKEY_R(6), + SUBKEY_L(6),SUBKEY_R(6), io[0],io[1],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(5),CAMELLIA_SUBKEY_R(5), + SUBKEY_L(5),SUBKEY_R(5), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(4),CAMELLIA_SUBKEY_R(4), + SUBKEY_L(4),SUBKEY_R(4), io[0],io[1],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(3),CAMELLIA_SUBKEY_R(3), + SUBKEY_L(3),SUBKEY_R(3), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(2),CAMELLIA_SUBKEY_R(2), + SUBKEY_L(2),SUBKEY_R(2), io[0],io[1],il,ir,t0,t1); /* post whitening but kw4 */ - io[2] ^= CAMELLIA_SUBKEY_L(0); - io[3] ^= CAMELLIA_SUBKEY_R(0); - - io_text[0] = cpu_to_be32(io[2]); - io_text[1] = cpu_to_be32(io[3]); - io_text[2] = cpu_to_be32(io[0]); - io_text[3] = cpu_to_be32(io[1]); + io_text[0] = io[2] ^ SUBKEY_L(0); + io_text[1] = io[3] ^ SUBKEY_R(0); + io_text[2] = io[0]; + io_text[3] = io[1]; } -static void camellia_encrypt256(const u32 *subkey, __be32 *io_text) +static void camellia_encrypt256(const u32 *subkey, u32 *io_text) { - u32 il,ir,t0,t1; /* temporary valiables */ + u32 il,ir,t0,t1; /* temporary variables */ u32 io[4]; - io[0] = be32_to_cpu(io_text[0]); - io[1] = be32_to_cpu(io_text[1]); - io[2] = be32_to_cpu(io_text[2]); - io[3] = be32_to_cpu(io_text[3]); - /* pre whitening but absorb kw2 */ - io[0] ^= CAMELLIA_SUBKEY_L(0); - io[1] ^= CAMELLIA_SUBKEY_R(0); + io[0] = io_text[0] ^ SUBKEY_L(0); + io[1] = io_text[1] ^ SUBKEY_R(0); + io[2] = io_text[2]; + io[3] = io_text[3]; /* main iteration */ CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(2),CAMELLIA_SUBKEY_R(2), + SUBKEY_L(2),SUBKEY_R(2), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(3),CAMELLIA_SUBKEY_R(3), + SUBKEY_L(3),SUBKEY_R(3), io[0],io[1],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(4),CAMELLIA_SUBKEY_R(4), + SUBKEY_L(4),SUBKEY_R(4), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(5),CAMELLIA_SUBKEY_R(5), + SUBKEY_L(5),SUBKEY_R(5), io[0],io[1],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(6),CAMELLIA_SUBKEY_R(6), + SUBKEY_L(6),SUBKEY_R(6), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(7),CAMELLIA_SUBKEY_R(7), + SUBKEY_L(7),SUBKEY_R(7), io[0],io[1],il,ir,t0,t1); CAMELLIA_FLS(io[0],io[1],io[2],io[3], - CAMELLIA_SUBKEY_L(8),CAMELLIA_SUBKEY_R(8), - CAMELLIA_SUBKEY_L(9),CAMELLIA_SUBKEY_R(9), + SUBKEY_L(8),SUBKEY_R(8), + SUBKEY_L(9),SUBKEY_R(9), t0,t1,il,ir); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(10),CAMELLIA_SUBKEY_R(10), + SUBKEY_L(10),SUBKEY_R(10), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(11),CAMELLIA_SUBKEY_R(11), + SUBKEY_L(11),SUBKEY_R(11), io[0],io[1],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(12),CAMELLIA_SUBKEY_R(12), + SUBKEY_L(12),SUBKEY_R(12), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(13),CAMELLIA_SUBKEY_R(13), + SUBKEY_L(13),SUBKEY_R(13), io[0],io[1],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(14),CAMELLIA_SUBKEY_R(14), + SUBKEY_L(14),SUBKEY_R(14), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(15),CAMELLIA_SUBKEY_R(15), + SUBKEY_L(15),SUBKEY_R(15), io[0],io[1],il,ir,t0,t1); CAMELLIA_FLS(io[0],io[1],io[2],io[3], - CAMELLIA_SUBKEY_L(16),CAMELLIA_SUBKEY_R(16), - CAMELLIA_SUBKEY_L(17),CAMELLIA_SUBKEY_R(17), + SUBKEY_L(16),SUBKEY_R(16), + SUBKEY_L(17),SUBKEY_R(17), t0,t1,il,ir); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(18),CAMELLIA_SUBKEY_R(18), + SUBKEY_L(18),SUBKEY_R(18), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(19),CAMELLIA_SUBKEY_R(19), + SUBKEY_L(19),SUBKEY_R(19), io[0],io[1],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(20),CAMELLIA_SUBKEY_R(20), + SUBKEY_L(20),SUBKEY_R(20), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(21),CAMELLIA_SUBKEY_R(21), + SUBKEY_L(21),SUBKEY_R(21), io[0],io[1],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(22),CAMELLIA_SUBKEY_R(22), + SUBKEY_L(22),SUBKEY_R(22), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(23),CAMELLIA_SUBKEY_R(23), + SUBKEY_L(23),SUBKEY_R(23), io[0],io[1],il,ir,t0,t1); CAMELLIA_FLS(io[0],io[1],io[2],io[3], - CAMELLIA_SUBKEY_L(24),CAMELLIA_SUBKEY_R(24), - CAMELLIA_SUBKEY_L(25),CAMELLIA_SUBKEY_R(25), + SUBKEY_L(24),SUBKEY_R(24), + SUBKEY_L(25),SUBKEY_R(25), t0,t1,il,ir); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(26),CAMELLIA_SUBKEY_R(26), + SUBKEY_L(26),SUBKEY_R(26), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(27),CAMELLIA_SUBKEY_R(27), + SUBKEY_L(27),SUBKEY_R(27), io[0],io[1],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(28),CAMELLIA_SUBKEY_R(28), + SUBKEY_L(28),SUBKEY_R(28), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(29),CAMELLIA_SUBKEY_R(29), + SUBKEY_L(29),SUBKEY_R(29), io[0],io[1],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(30),CAMELLIA_SUBKEY_R(30), + SUBKEY_L(30),SUBKEY_R(30), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(31),CAMELLIA_SUBKEY_R(31), + SUBKEY_L(31),SUBKEY_R(31), io[0],io[1],il,ir,t0,t1); /* post whitening but kw4 */ - io[2] ^= CAMELLIA_SUBKEY_L(32); - io[3] ^= CAMELLIA_SUBKEY_R(32); - - io_text[0] = cpu_to_be32(io[2]); - io_text[1] = cpu_to_be32(io[3]); - io_text[2] = cpu_to_be32(io[0]); - io_text[3] = cpu_to_be32(io[1]); + io_text[0] = io[2] ^ SUBKEY_L(32); + io_text[1] = io[3] ^ SUBKEY_R(32); + io_text[2] = io[0]; + io_text[3] = io[1]; } -static void camellia_decrypt256(const u32 *subkey, __be32 *io_text) +static void camellia_decrypt256(const u32 *subkey, u32 *io_text) { - u32 il,ir,t0,t1; /* temporary valiables */ + u32 il,ir,t0,t1; /* temporary variables */ u32 io[4]; - io[0] = be32_to_cpu(io_text[0]); - io[1] = be32_to_cpu(io_text[1]); - io[2] = be32_to_cpu(io_text[2]); - io[3] = be32_to_cpu(io_text[3]); - /* pre whitening but absorb kw2 */ - io[0] ^= CAMELLIA_SUBKEY_L(32); - io[1] ^= CAMELLIA_SUBKEY_R(32); + io[0] = io_text[0] ^ SUBKEY_L(32); + io[1] = io_text[1] ^ SUBKEY_R(32); + io[2] = io_text[2]; + io[3] = io_text[3]; /* main iteration */ CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(31),CAMELLIA_SUBKEY_R(31), + SUBKEY_L(31),SUBKEY_R(31), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(30),CAMELLIA_SUBKEY_R(30), + SUBKEY_L(30),SUBKEY_R(30), io[0],io[1],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(29),CAMELLIA_SUBKEY_R(29), + SUBKEY_L(29),SUBKEY_R(29), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(28),CAMELLIA_SUBKEY_R(28), + SUBKEY_L(28),SUBKEY_R(28), io[0],io[1],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(27),CAMELLIA_SUBKEY_R(27), + SUBKEY_L(27),SUBKEY_R(27), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(26),CAMELLIA_SUBKEY_R(26), + SUBKEY_L(26),SUBKEY_R(26), io[0],io[1],il,ir,t0,t1); CAMELLIA_FLS(io[0],io[1],io[2],io[3], - CAMELLIA_SUBKEY_L(25),CAMELLIA_SUBKEY_R(25), - CAMELLIA_SUBKEY_L(24),CAMELLIA_SUBKEY_R(24), + SUBKEY_L(25),SUBKEY_R(25), + SUBKEY_L(24),SUBKEY_R(24), t0,t1,il,ir); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(23),CAMELLIA_SUBKEY_R(23), + SUBKEY_L(23),SUBKEY_R(23), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(22),CAMELLIA_SUBKEY_R(22), + SUBKEY_L(22),SUBKEY_R(22), io[0],io[1],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(21),CAMELLIA_SUBKEY_R(21), + SUBKEY_L(21),SUBKEY_R(21), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(20),CAMELLIA_SUBKEY_R(20), + SUBKEY_L(20),SUBKEY_R(20), io[0],io[1],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(19),CAMELLIA_SUBKEY_R(19), + SUBKEY_L(19),SUBKEY_R(19), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(18),CAMELLIA_SUBKEY_R(18), + SUBKEY_L(18),SUBKEY_R(18), io[0],io[1],il,ir,t0,t1); CAMELLIA_FLS(io[0],io[1],io[2],io[3], - CAMELLIA_SUBKEY_L(17),CAMELLIA_SUBKEY_R(17), - CAMELLIA_SUBKEY_L(16),CAMELLIA_SUBKEY_R(16), + SUBKEY_L(17),SUBKEY_R(17), + SUBKEY_L(16),SUBKEY_R(16), t0,t1,il,ir); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(15),CAMELLIA_SUBKEY_R(15), + SUBKEY_L(15),SUBKEY_R(15), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(14),CAMELLIA_SUBKEY_R(14), + SUBKEY_L(14),SUBKEY_R(14), io[0],io[1],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(13),CAMELLIA_SUBKEY_R(13), + SUBKEY_L(13),SUBKEY_R(13), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(12),CAMELLIA_SUBKEY_R(12), + SUBKEY_L(12),SUBKEY_R(12), io[0],io[1],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(11),CAMELLIA_SUBKEY_R(11), + SUBKEY_L(11),SUBKEY_R(11), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(10),CAMELLIA_SUBKEY_R(10), + SUBKEY_L(10),SUBKEY_R(10), io[0],io[1],il,ir,t0,t1); CAMELLIA_FLS(io[0],io[1],io[2],io[3], - CAMELLIA_SUBKEY_L(9),CAMELLIA_SUBKEY_R(9), - CAMELLIA_SUBKEY_L(8),CAMELLIA_SUBKEY_R(8), + SUBKEY_L(9),SUBKEY_R(9), + SUBKEY_L(8),SUBKEY_R(8), t0,t1,il,ir); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(7),CAMELLIA_SUBKEY_R(7), + SUBKEY_L(7),SUBKEY_R(7), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(6),CAMELLIA_SUBKEY_R(6), + SUBKEY_L(6),SUBKEY_R(6), io[0],io[1],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(5),CAMELLIA_SUBKEY_R(5), + SUBKEY_L(5),SUBKEY_R(5), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(4),CAMELLIA_SUBKEY_R(4), + SUBKEY_L(4),SUBKEY_R(4), io[0],io[1],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[0],io[1], - CAMELLIA_SUBKEY_L(3),CAMELLIA_SUBKEY_R(3), + SUBKEY_L(3),SUBKEY_R(3), io[2],io[3],il,ir,t0,t1); CAMELLIA_ROUNDSM(io[2],io[3], - CAMELLIA_SUBKEY_L(2),CAMELLIA_SUBKEY_R(2), + SUBKEY_L(2),SUBKEY_R(2), io[0],io[1],il,ir,t0,t1); /* post whitening but kw4 */ - io[2] ^= CAMELLIA_SUBKEY_L(0); - io[3] ^= CAMELLIA_SUBKEY_R(0); - - io_text[0] = cpu_to_be32(io[2]); - io_text[1] = cpu_to_be32(io[3]); - io_text[2] = cpu_to_be32(io[0]); - io_text[3] = cpu_to_be32(io[1]); + io_text[0] = io[2] ^ SUBKEY_L(0); + io_text[1] = io[3] ^ SUBKEY_R(0); + io_text[2] = io[0]; + io_text[3] = io[1]; } @@ -1607,9 +1496,12 @@ static void camellia_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) const __be32 *src = (const __be32 *)in; __be32 *dst = (__be32 *)out; - __be32 tmp[4]; + u32 tmp[4]; - memcpy(tmp, src, CAMELLIA_BLOCK_SIZE); + tmp[0] = be32_to_cpu(src[0]); + tmp[1] = be32_to_cpu(src[1]); + tmp[2] = be32_to_cpu(src[2]); + tmp[3] = be32_to_cpu(src[3]); switch (cctx->key_length) { case 16: @@ -1622,7 +1514,10 @@ static void camellia_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) break; } - memcpy(dst, tmp, CAMELLIA_BLOCK_SIZE); + dst[0] = cpu_to_be32(tmp[0]); + dst[1] = cpu_to_be32(tmp[1]); + dst[2] = cpu_to_be32(tmp[2]); + dst[3] = cpu_to_be32(tmp[3]); } static void camellia_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) @@ -1631,9 +1526,12 @@ static void camellia_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) const __be32 *src = (const __be32 *)in; __be32 *dst = (__be32 *)out; - __be32 tmp[4]; + u32 tmp[4]; - memcpy(tmp, src, CAMELLIA_BLOCK_SIZE); + tmp[0] = be32_to_cpu(src[0]); + tmp[1] = be32_to_cpu(src[1]); + tmp[2] = be32_to_cpu(src[2]); + tmp[3] = be32_to_cpu(src[3]); switch (cctx->key_length) { case 16: @@ -1646,7 +1544,10 @@ static void camellia_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) break; } - memcpy(dst, tmp, CAMELLIA_BLOCK_SIZE); + dst[0] = cpu_to_be32(tmp[0]); + dst[1] = cpu_to_be32(tmp[1]); + dst[2] = cpu_to_be32(tmp[2]); + dst[3] = cpu_to_be32(tmp[3]); } static struct crypto_alg camellia_alg = { -- cgit v1.2.3-59-g8ed1b From 1ce73e8d6d95ceb860184c34fa1a91a82e51cbb3 Mon Sep 17 00:00:00 2001 From: Denys Vlasenko Date: Tue, 6 Nov 2007 22:13:40 +0800 Subject: [CRYPTO] camellia: Code cleanup Optimize GETU32 to use 4-byte memcpy (modern gcc will convert such memcpy to single move instruction on i386). Original GETU32 did four byte fetches, and shifted/XORed those. Signed-off-by: Denys Vlasenko Acked-by: Noriaki TAKAMIYA Signed-off-by: Herbert Xu --- crypto/camellia.c | 39 +++++++++++++++++++++------------------ 1 file changed, 21 insertions(+), 18 deletions(-) diff --git a/crypto/camellia.c b/crypto/camellia.c index ac372e43e2a3..16529dddee72 100644 --- a/crypto/camellia.c +++ b/crypto/camellia.c @@ -330,10 +330,12 @@ static const u32 camellia_sp4404[256] = { * macros */ -# define GETU32(pt) (((u32)(pt)[0] << 24) \ - ^ ((u32)(pt)[1] << 16) \ - ^ ((u32)(pt)[2] << 8) \ - ^ ((u32)(pt)[3])) +# define GETU32(v, pt) \ + do { \ + /* latest breed of gcc is clever enough to use move */ \ + memcpy(&(v), (pt), 4); \ + (v) = be32_to_cpu(v); \ + } while(0) /* rotation right shift 1byte */ #define ROR8(x) (((x) >> 8) + ((x) << 24)) @@ -433,10 +435,11 @@ static void camellia_setup128(const unsigned char *key, u32 *subkey) /** * k == kll || klr || krl || krr (|| is concatination) */ - kll = GETU32(key ); - klr = GETU32(key + 4); - krl = GETU32(key + 8); - krr = GETU32(key + 12); + GETU32(kll, key ); + GETU32(klr, key + 4); + GETU32(krl, key + 8); + GETU32(krr, key + 12); + /** * generate KL dependent subkeys */ @@ -687,8 +690,8 @@ static void camellia_setup128(const unsigned char *key, u32 *subkey) static void camellia_setup256(const unsigned char *key, u32 *subkey) { - u32 kll,klr,krl,krr; /* left half of key */ - u32 krll,krlr,krrl,krrr; /* right half of key */ + u32 kll, klr, krl, krr; /* left half of key */ + u32 krll, krlr, krrl, krrr; /* right half of key */ u32 il, ir, t0, t1, w0, w1; /* temporary variables */ u32 kw4l, kw4r, dw, tl, tr; u32 subL[34]; @@ -698,14 +701,14 @@ static void camellia_setup256(const unsigned char *key, u32 *subkey) * key = (kll || klr || krl || krr || krll || krlr || krrl || krrr) * (|| is concatination) */ - kll = GETU32(key ); - klr = GETU32(key + 4); - krl = GETU32(key + 8); - krr = GETU32(key + 12); - krll = GETU32(key + 16); - krlr = GETU32(key + 20); - krrl = GETU32(key + 24); - krrr = GETU32(key + 28); + GETU32(kll, key ); + GETU32(klr, key + 4); + GETU32(krl, key + 8); + GETU32(krr, key + 12); + GETU32(krll, key + 16); + GETU32(krlr, key + 20); + GETU32(krrl, key + 24); + GETU32(krrr, key + 28); /* generate KL dependent subkeys */ /* kw1 */ -- cgit v1.2.3-59-g8ed1b From d3e7480572bf882dee5baa2891bccbfa3db0b1a1 Mon Sep 17 00:00:00 2001 From: Denys Vlasenko Date: Tue, 6 Nov 2007 22:15:19 +0800 Subject: [CRYPTO] camellia: De-unrolling Move huge unrolled pieces of code (3 screenfuls) at the end of 128/256 key setup routines into common camellia_setup_tail(), convert it to loop there. Loop is still unrolled six times, so performance hit is very small, code size win is big. Signed-off-by: Denys Vlasenko Acked-by: Noriaki TAKAMIYA Signed-off-by: Herbert Xu --- crypto/camellia.c | 107 ++++++++++++------------------------------------------ 1 file changed, 23 insertions(+), 84 deletions(-) diff --git a/crypto/camellia.c b/crypto/camellia.c index 16529dddee72..2e129ab1a6a2 100644 --- a/crypto/camellia.c +++ b/crypto/camellia.c @@ -424,6 +424,27 @@ static const u32 camellia_sp4404[256] = { #define SUBKEY_L(INDEX) (subkey[(INDEX)*2]) #define SUBKEY_R(INDEX) (subkey[(INDEX)*2 + 1]) +static void camellia_setup_tail(u32 *subkey, int max) +{ + u32 dw; + int i = 2; + do { + dw = SUBKEY_L(i + 0) ^ SUBKEY_R(i + 0); dw = ROL8(dw);/* round 1 */ + SUBKEY_R(i + 0) = SUBKEY_L(i + 0) ^ dw; SUBKEY_L(i + 0) = dw; + dw = SUBKEY_L(i + 1) ^ SUBKEY_R(i + 1); dw = ROL8(dw);/* round 2 */ + SUBKEY_R(i + 1) = SUBKEY_L(i + 1) ^ dw; SUBKEY_L(i + 1) = dw; + dw = SUBKEY_L(i + 2) ^ SUBKEY_R(i + 2); dw = ROL8(dw);/* round 3 */ + SUBKEY_R(i + 2) = SUBKEY_L(i + 2) ^ dw; SUBKEY_L(i + 2) = dw; + dw = SUBKEY_L(i + 3) ^ SUBKEY_R(i + 3); dw = ROL8(dw);/* round 4 */ + SUBKEY_R(i + 3) = SUBKEY_L(i + 3) ^ dw; SUBKEY_L(i + 3) = dw; + dw = SUBKEY_L(i + 4) ^ SUBKEY_R(i + 4); dw = ROL8(dw);/* round 5 */ + SUBKEY_R(i + 4) = SUBKEY_L(i + 4) ^ dw; SUBKEY_L(i + 4) = dw; + dw = SUBKEY_L(i + 5) ^ SUBKEY_R(i + 5); dw = ROL8(dw);/* round 6 */ + SUBKEY_R(i + 5) = SUBKEY_L(i + 5) ^ dw; SUBKEY_L(i + 5) = dw; + i += 8; + } while (i < max); +} + static void camellia_setup128(const unsigned char *key, u32 *subkey) { u32 kll, klr, krl, krr; @@ -650,42 +671,7 @@ static void camellia_setup128(const unsigned char *key, u32 *subkey) SUBKEY_R(24) = subR[24] ^ subR[23]; /* apply the inverse of the last half of P-function */ - dw = SUBKEY_L(2) ^ SUBKEY_R(2); dw = ROL8(dw);/* round 1 */ - SUBKEY_R(2) = SUBKEY_L(2) ^ dw; SUBKEY_L(2) = dw; - dw = SUBKEY_L(3) ^ SUBKEY_R(3); dw = ROL8(dw);/* round 2 */ - SUBKEY_R(3) = SUBKEY_L(3) ^ dw; SUBKEY_L(3) = dw; - dw = SUBKEY_L(4) ^ SUBKEY_R(4); dw = ROL8(dw);/* round 3 */ - SUBKEY_R(4) = SUBKEY_L(4) ^ dw; SUBKEY_L(4) = dw; - dw = SUBKEY_L(5) ^ SUBKEY_R(5); dw = ROL8(dw);/* round 4 */ - SUBKEY_R(5) = SUBKEY_L(5) ^ dw; SUBKEY_L(5) = dw; - dw = SUBKEY_L(6) ^ SUBKEY_R(6); dw = ROL8(dw);/* round 5 */ - SUBKEY_R(6) = SUBKEY_L(6) ^ dw; SUBKEY_L(6) = dw; - dw = SUBKEY_L(7) ^ SUBKEY_R(7); dw = ROL8(dw);/* round 6 */ - SUBKEY_R(7) = SUBKEY_L(7) ^ dw; SUBKEY_L(7) = dw; - dw = SUBKEY_L(10) ^ SUBKEY_R(10); dw = ROL8(dw);/* round 7 */ - SUBKEY_R(10) = SUBKEY_L(10) ^ dw; SUBKEY_L(10) = dw; - dw = SUBKEY_L(11) ^ SUBKEY_R(11); dw = ROL8(dw);/* round 8 */ - SUBKEY_R(11) = SUBKEY_L(11) ^ dw; SUBKEY_L(11) = dw; - dw = SUBKEY_L(12) ^ SUBKEY_R(12); dw = ROL8(dw);/* round 9 */ - SUBKEY_R(12) = SUBKEY_L(12) ^ dw; SUBKEY_L(12) = dw; - dw = SUBKEY_L(13) ^ SUBKEY_R(13); dw = ROL8(dw);/* round 10 */ - SUBKEY_R(13) = SUBKEY_L(13) ^ dw; SUBKEY_L(13) = dw; - dw = SUBKEY_L(14) ^ SUBKEY_R(14); dw = ROL8(dw);/* round 11 */ - SUBKEY_R(14) = SUBKEY_L(14) ^ dw; SUBKEY_L(14) = dw; - dw = SUBKEY_L(15) ^ SUBKEY_R(15); dw = ROL8(dw);/* round 12 */ - SUBKEY_R(15) = SUBKEY_L(15) ^ dw; SUBKEY_L(15) = dw; - dw = SUBKEY_L(18) ^ SUBKEY_R(18); dw = ROL8(dw);/* round 13 */ - SUBKEY_R(18) = SUBKEY_L(18) ^ dw; SUBKEY_L(18) = dw; - dw = SUBKEY_L(19) ^ SUBKEY_R(19); dw = ROL8(dw);/* round 14 */ - SUBKEY_R(19) = SUBKEY_L(19) ^ dw; SUBKEY_L(19) = dw; - dw = SUBKEY_L(20) ^ SUBKEY_R(20); dw = ROL8(dw);/* round 15 */ - SUBKEY_R(20) = SUBKEY_L(20) ^ dw; SUBKEY_L(20) = dw; - dw = SUBKEY_L(21) ^ SUBKEY_R(21); dw = ROL8(dw);/* round 16 */ - SUBKEY_R(21) = SUBKEY_L(21) ^ dw; SUBKEY_L(21) = dw; - dw = SUBKEY_L(22) ^ SUBKEY_R(22); dw = ROL8(dw);/* round 17 */ - SUBKEY_R(22) = SUBKEY_L(22) ^ dw; SUBKEY_L(22) = dw; - dw = SUBKEY_L(23) ^ SUBKEY_R(23); dw = ROL8(dw);/* round 18 */ - SUBKEY_R(23) = SUBKEY_L(23) ^ dw; SUBKEY_L(23) = dw; + camellia_setup_tail(subkey, 24); } static void camellia_setup256(const unsigned char *key, u32 *subkey) @@ -995,54 +981,7 @@ static void camellia_setup256(const unsigned char *key, u32 *subkey) SUBKEY_R(32) = subR[32] ^ subR[31]; /* apply the inverse of the last half of P-function */ - dw = SUBKEY_L(2) ^ SUBKEY_R(2); dw = ROL8(dw);/* round 1 */ - SUBKEY_R(2) = SUBKEY_L(2) ^ dw; SUBKEY_L(2) = dw; - dw = SUBKEY_L(3) ^ SUBKEY_R(3); dw = ROL8(dw);/* round 2 */ - SUBKEY_R(3) = SUBKEY_L(3) ^ dw; SUBKEY_L(3) = dw; - dw = SUBKEY_L(4) ^ SUBKEY_R(4); dw = ROL8(dw);/* round 3 */ - SUBKEY_R(4) = SUBKEY_L(4) ^ dw; SUBKEY_L(4) = dw; - dw = SUBKEY_L(5) ^ SUBKEY_R(5); dw = ROL8(dw);/* round 4 */ - SUBKEY_R(5) = SUBKEY_L(5) ^ dw; SUBKEY_L(5) = dw; - dw = SUBKEY_L(6) ^ SUBKEY_R(6); dw = ROL8(dw);/* round 5 */ - SUBKEY_R(6) = SUBKEY_L(6) ^ dw; SUBKEY_L(6) = dw; - dw = SUBKEY_L(7) ^ SUBKEY_R(7); dw = ROL8(dw);/* round 6 */ - SUBKEY_R(7) = SUBKEY_L(7) ^ dw; SUBKEY_L(7) = dw; - dw = SUBKEY_L(10) ^ SUBKEY_R(10); dw = ROL8(dw);/* round 7 */ - SUBKEY_R(10) = SUBKEY_L(10) ^ dw; SUBKEY_L(10) = dw; - dw = SUBKEY_L(11) ^ SUBKEY_R(11); dw = ROL8(dw);/* round 8 */ - SUBKEY_R(11) = SUBKEY_L(11) ^ dw; SUBKEY_L(11) = dw; - dw = SUBKEY_L(12) ^ SUBKEY_R(12); dw = ROL8(dw);/* round 9 */ - SUBKEY_R(12) = SUBKEY_L(12) ^ dw; SUBKEY_L(12) = dw; - dw = SUBKEY_L(13) ^ SUBKEY_R(13); dw = ROL8(dw);/* round 10 */ - SUBKEY_R(13) = SUBKEY_L(13) ^ dw; SUBKEY_L(13) = dw; - dw = SUBKEY_L(14) ^ SUBKEY_R(14); dw = ROL8(dw);/* round 11 */ - SUBKEY_R(14) = SUBKEY_L(14) ^ dw; SUBKEY_L(14) = dw; - dw = SUBKEY_L(15) ^ SUBKEY_R(15); dw = ROL8(dw);/* round 12 */ - SUBKEY_R(15) = SUBKEY_L(15) ^ dw; SUBKEY_L(15) = dw; - dw = SUBKEY_L(18) ^ SUBKEY_R(18); dw = ROL8(dw);/* round 13 */ - SUBKEY_R(18) = SUBKEY_L(18) ^ dw; SUBKEY_L(18) = dw; - dw = SUBKEY_L(19) ^ SUBKEY_R(19); dw = ROL8(dw);/* round 14 */ - SUBKEY_R(19) = SUBKEY_L(19) ^ dw; SUBKEY_L(19) = dw; - dw = SUBKEY_L(20) ^ SUBKEY_R(20); dw = ROL8(dw);/* round 15 */ - SUBKEY_R(20) = SUBKEY_L(20) ^ dw; SUBKEY_L(20) = dw; - dw = SUBKEY_L(21) ^ SUBKEY_R(21); dw = ROL8(dw);/* round 16 */ - SUBKEY_R(21) = SUBKEY_L(21) ^ dw; SUBKEY_L(21) = dw; - dw = SUBKEY_L(22) ^ SUBKEY_R(22); dw = ROL8(dw);/* round 17 */ - SUBKEY_R(22) = SUBKEY_L(22) ^ dw; SUBKEY_L(22) = dw; - dw = SUBKEY_L(23) ^ SUBKEY_R(23); dw = ROL8(dw);/* round 18 */ - SUBKEY_R(23) = SUBKEY_L(23) ^ dw; SUBKEY_L(23) = dw; - dw = SUBKEY_L(26) ^ SUBKEY_R(26); dw = ROL8(dw);/* round 19 */ - SUBKEY_R(26) = SUBKEY_L(26) ^ dw; SUBKEY_L(26) = dw; - dw = SUBKEY_L(27) ^ SUBKEY_R(27); dw = ROL8(dw);/* round 20 */ - SUBKEY_R(27) = SUBKEY_L(27) ^ dw; SUBKEY_L(27) = dw; - dw = SUBKEY_L(28) ^ SUBKEY_R(28); dw = ROL8(dw);/* round 21 */ - SUBKEY_R(28) = SUBKEY_L(28) ^ dw; SUBKEY_L(28) = dw; - dw = SUBKEY_L(29) ^ SUBKEY_R(29); dw = ROL8(dw);/* round 22 */ - SUBKEY_R(29) = SUBKEY_L(29) ^ dw; SUBKEY_L(29) = dw; - dw = SUBKEY_L(30) ^ SUBKEY_R(30); dw = ROL8(dw);/* round 23 */ - SUBKEY_R(30) = SUBKEY_L(30) ^ dw; SUBKEY_L(30) = dw; - dw = SUBKEY_L(31) ^ SUBKEY_R(31); dw = ROL8(dw);/* round 24 */ - SUBKEY_R(31) = SUBKEY_L(31) ^ dw; SUBKEY_L(31) = dw; + camellia_setup_tail(subkey, 32); } static void camellia_setup192(const unsigned char *key, u32 *subkey) -- cgit v1.2.3-59-g8ed1b From 41fdab3dd385dde36caae60ed2df82aecb7a32f0 Mon Sep 17 00:00:00 2001 From: Joy Latten Date: Wed, 7 Nov 2007 22:59:47 +0800 Subject: [CRYPTO] ctr: Add countersize This patch adds countersize to CTR mode. The template is now ctr(algo,noncesize,ivsize,countersize). For example, ctr(aes,4,8,4) indicates the counterblock will be composed of a salt/nonce that is 4 bytes, an iv that is 8 bytes and the counter is 4 bytes. When noncesize + ivsize < blocksize, CTR initializes the last block - ivsize - noncesize portion of the block to zero. Otherwise the counter block is composed of the IV (and nonce if necessary). If noncesize + ivsize == blocksize, then this indicates that user is passing in entire counterblock. Thus countersize indicates the amount of bytes in counterblock to use as the counter for incrementing. CTR will increment counter portion by 1, and begin encryption with that value. Note that CTR assumes the counter portion of the block that will be incremented is stored in big endian. Signed-off-by: Joy Latten Signed-off-by: Herbert Xu --- crypto/ctr.c | 32 +++++++++++++++++++++----------- crypto/tcrypt.c | 8 ++++---- 2 files changed, 25 insertions(+), 15 deletions(-) diff --git a/crypto/ctr.c b/crypto/ctr.c index 810d5ec2d5d2..b974a9f9b879 100644 --- a/crypto/ctr.c +++ b/crypto/ctr.c @@ -23,6 +23,7 @@ struct ctr_instance_ctx { struct crypto_spawn alg; unsigned int noncesize; unsigned int ivsize; + unsigned int countersize; }; struct crypto_ctr_ctx { @@ -186,7 +187,6 @@ static int crypto_ctr_crypt(struct blkcipher_desc *desc, unsigned long alignmask = crypto_cipher_alignmask(child); u8 cblk[bsize + alignmask]; u8 *counterblk = (u8 *)ALIGN((unsigned long)cblk, alignmask + 1); - unsigned int countersize; int err; blkcipher_walk_init(&walk, dst, src, nbytes); @@ -198,18 +198,18 @@ static int crypto_ctr_crypt(struct blkcipher_desc *desc, memcpy(counterblk + ictx->noncesize, walk.iv, ictx->ivsize); /* initialize counter portion of counter block */ - countersize = bsize - ictx->noncesize - ictx->ivsize; - ctr_inc_quad(counterblk + (bsize - countersize), countersize); + ctr_inc_quad(counterblk + (bsize - ictx->countersize), + ictx->countersize); while (walk.nbytes) { if (walk.src.virt.addr == walk.dst.virt.addr) nbytes = crypto_ctr_crypt_inplace(&walk, child, counterblk, - countersize); + ictx->countersize); else nbytes = crypto_ctr_crypt_segment(&walk, child, counterblk, - countersize); + ictx->countersize); err = blkcipher_walk_done(desc, &walk, nbytes); } @@ -251,6 +251,7 @@ static struct crypto_instance *crypto_ctr_alloc(struct rtattr **tb) struct ctr_instance_ctx *ictx; unsigned int noncesize; unsigned int ivsize; + unsigned int countersize; int err; err = crypto_check_attr_type(tb, CRYPTO_ALG_TYPE_BLKCIPHER); @@ -270,9 +271,17 @@ static struct crypto_instance *crypto_ctr_alloc(struct rtattr **tb) if (err) goto out_put_alg; - /* verify size of nonce + iv + counter */ + err = crypto_attr_u32(tb[4], &countersize); + if (err) + goto out_put_alg; + + /* verify size of nonce + iv + counter + * counter must be >= 4 bytes. + */ err = -EINVAL; - if ((noncesize + ivsize) >= alg->cra_blocksize) + if (((noncesize + ivsize + countersize) < alg->cra_blocksize) || + ((noncesize + ivsize) > alg->cra_blocksize) || + (countersize > alg->cra_blocksize) || (countersize < 4)) goto out_put_alg; inst = kzalloc(sizeof(*inst) + sizeof(*ictx), GFP_KERNEL); @@ -282,20 +291,21 @@ static struct crypto_instance *crypto_ctr_alloc(struct rtattr **tb) err = -ENAMETOOLONG; if (snprintf(inst->alg.cra_name, CRYPTO_MAX_ALG_NAME, - "ctr(%s,%u,%u)", alg->cra_name, noncesize, - ivsize) >= CRYPTO_MAX_ALG_NAME) { + "ctr(%s,%u,%u,%u)", alg->cra_name, noncesize, + ivsize, countersize) >= CRYPTO_MAX_ALG_NAME) { goto err_free_inst; } if (snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME, - "ctr(%s,%u,%u)", alg->cra_driver_name, noncesize, - ivsize) >= CRYPTO_MAX_ALG_NAME) { + "ctr(%s,%u,%u,%u)", alg->cra_driver_name, noncesize, + ivsize, countersize) >= CRYPTO_MAX_ALG_NAME) { goto err_free_inst; } ictx = crypto_instance_ctx(inst); ictx->noncesize = noncesize; ictx->ivsize = ivsize; + ictx->countersize = countersize; err = crypto_init_spawn(&ictx->alg, alg, inst, CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_ASYNC); diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c index 640cbcad32a1..aa84bc4f2313 100644 --- a/crypto/tcrypt.c +++ b/crypto/tcrypt.c @@ -969,9 +969,9 @@ static void do_test(void) AES_XTS_ENC_TEST_VECTORS); test_cipher("xts(aes)", DECRYPT, aes_xts_dec_tv_template, AES_XTS_DEC_TEST_VECTORS); - test_cipher("ctr(aes,4,8)", ENCRYPT, aes_ctr_enc_tv_template, + test_cipher("ctr(aes,4,8,4)", ENCRYPT, aes_ctr_enc_tv_template, AES_CTR_ENC_TEST_VECTORS); - test_cipher("ctr(aes,4,8)", DECRYPT, aes_ctr_dec_tv_template, + test_cipher("ctr(aes,4,8,4)", DECRYPT, aes_ctr_dec_tv_template, AES_CTR_DEC_TEST_VECTORS); //CAST5 @@ -1160,9 +1160,9 @@ static void do_test(void) AES_XTS_ENC_TEST_VECTORS); test_cipher("xts(aes)", DECRYPT, aes_xts_dec_tv_template, AES_XTS_DEC_TEST_VECTORS); - test_cipher("ctr(aes,4,8)", ENCRYPT, aes_ctr_enc_tv_template, + test_cipher("ctr(aes,4,8,4)", ENCRYPT, aes_ctr_enc_tv_template, AES_CTR_ENC_TEST_VECTORS); - test_cipher("ctr(aes,4,8)", DECRYPT, aes_ctr_dec_tv_template, + test_cipher("ctr(aes,4,8,4)", DECRYPT, aes_ctr_dec_tv_template, AES_CTR_DEC_TEST_VECTORS); break; -- cgit v1.2.3-59-g8ed1b From be5fb270125729b7bca7879967f1dfadff0d9841 Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Thu, 8 Nov 2007 20:39:26 +0800 Subject: [CRYPTO] aes-generic: Coding style cleanup Signed-off-by: Sebastian Siewior Signed-off-by: Herbert Xu --- crypto/aes_generic.c | 325 ++++++++++++++++++++++++++++----------------------- 1 file changed, 176 insertions(+), 149 deletions(-) diff --git a/crypto/aes_generic.c b/crypto/aes_generic.c index 6683260475f9..df8df4d346d2 100644 --- a/crypto/aes_generic.c +++ b/crypto/aes_generic.c @@ -63,8 +63,7 @@ /* * #define byte(x, nr) ((unsigned char)((x) >> (nr*8))) */ -static inline u8 -byte(const u32 x, const unsigned n) +static inline u8 byte(const u32 x, const unsigned n) { return x >> (n << 3); } @@ -88,55 +87,25 @@ static u32 it_tab[4][256]; static u32 fl_tab[4][256]; static u32 il_tab[4][256]; -static inline u8 __init -f_mult (u8 a, u8 b) +static inline u8 __init f_mult(u8 a, u8 b) { u8 aa = log_tab[a], cc = aa + log_tab[b]; return pow_tab[cc + (cc < aa ? 1 : 0)]; } -#define ff_mult(a,b) (a && b ? f_mult(a, b) : 0) - -#define f_rn(bo, bi, n, k) \ - bo[n] = ft_tab[0][byte(bi[n],0)] ^ \ - ft_tab[1][byte(bi[(n + 1) & 3],1)] ^ \ - ft_tab[2][byte(bi[(n + 2) & 3],2)] ^ \ - ft_tab[3][byte(bi[(n + 3) & 3],3)] ^ *(k + n) - -#define i_rn(bo, bi, n, k) \ - bo[n] = it_tab[0][byte(bi[n],0)] ^ \ - it_tab[1][byte(bi[(n + 3) & 3],1)] ^ \ - it_tab[2][byte(bi[(n + 2) & 3],2)] ^ \ - it_tab[3][byte(bi[(n + 1) & 3],3)] ^ *(k + n) - -#define ls_box(x) \ - ( fl_tab[0][byte(x, 0)] ^ \ - fl_tab[1][byte(x, 1)] ^ \ - fl_tab[2][byte(x, 2)] ^ \ - fl_tab[3][byte(x, 3)] ) - -#define f_rl(bo, bi, n, k) \ - bo[n] = fl_tab[0][byte(bi[n],0)] ^ \ - fl_tab[1][byte(bi[(n + 1) & 3],1)] ^ \ - fl_tab[2][byte(bi[(n + 2) & 3],2)] ^ \ - fl_tab[3][byte(bi[(n + 3) & 3],3)] ^ *(k + n) - -#define i_rl(bo, bi, n, k) \ - bo[n] = il_tab[0][byte(bi[n],0)] ^ \ - il_tab[1][byte(bi[(n + 3) & 3],1)] ^ \ - il_tab[2][byte(bi[(n + 2) & 3],2)] ^ \ - il_tab[3][byte(bi[(n + 1) & 3],3)] ^ *(k + n) - -static void __init -gen_tabs (void) +#define ff_mult(a, b) (a && b ? f_mult(a, b) : 0) + +static void __init gen_tabs(void) { u32 i, t; u8 p, q; - /* log and power tables for GF(2**8) finite field with - 0x011b as modular polynomial - the simplest primitive - root is 0x03, used here to generate the tables */ + /* + * log and power tables for GF(2**8) finite field with + * 0x011b as modular polynomial - the simplest primitive + * root is 0x03, used here to generate the tables + */ for (i = 0, p = 1; i < 256; ++i) { pow_tab[i] = (u8) p; @@ -170,9 +139,9 @@ gen_tabs (void) fl_tab[2][i] = rol32(t, 16); fl_tab[3][i] = rol32(t, 24); - t = ((u32) ff_mult (2, p)) | + t = ((u32) ff_mult(2, p)) | ((u32) p << 8) | - ((u32) p << 16) | ((u32) ff_mult (3, p) << 24); + ((u32) p << 16) | ((u32) ff_mult(3, p) << 24); ft_tab[0][i] = t; ft_tab[1][i] = rol32(t, 8); @@ -187,10 +156,10 @@ gen_tabs (void) il_tab[2][i] = rol32(t, 16); il_tab[3][i] = rol32(t, 24); - t = ((u32) ff_mult (14, p)) | - ((u32) ff_mult (9, p) << 8) | - ((u32) ff_mult (13, p) << 16) | - ((u32) ff_mult (11, p) << 24); + t = ((u32) ff_mult(14, p)) | + ((u32) ff_mult(9, p) << 8) | + ((u32) ff_mult(13, p) << 16) | + ((u32) ff_mult(11, p) << 24); it_tab[0][i] = t; it_tab[1][i] = rol32(t, 8); @@ -199,53 +168,80 @@ gen_tabs (void) } } -#define star_x(x) (((x) & 0x7f7f7f7f) << 1) ^ ((((x) & 0x80808080) >> 7) * 0x1b) - -#define imix_col(y,x) \ - u = star_x(x); \ - v = star_x(u); \ - w = star_x(v); \ - t = w ^ (x); \ - (y) = u ^ v ^ w; \ - (y) ^= ror32(u ^ t, 8) ^ \ - ror32(v ^ t, 16) ^ \ - ror32(t,24) - /* initialise the key schedule from the user supplied key */ -#define loop4(i) \ -{ t = ror32(t, 8); t = ls_box(t) ^ rco_tab[i]; \ - t ^= E_KEY[4 * i]; E_KEY[4 * i + 4] = t; \ - t ^= E_KEY[4 * i + 1]; E_KEY[4 * i + 5] = t; \ - t ^= E_KEY[4 * i + 2]; E_KEY[4 * i + 6] = t; \ - t ^= E_KEY[4 * i + 3]; E_KEY[4 * i + 7] = t; \ -} - -#define loop6(i) \ -{ t = ror32(t, 8); t = ls_box(t) ^ rco_tab[i]; \ - t ^= E_KEY[6 * i]; E_KEY[6 * i + 6] = t; \ - t ^= E_KEY[6 * i + 1]; E_KEY[6 * i + 7] = t; \ - t ^= E_KEY[6 * i + 2]; E_KEY[6 * i + 8] = t; \ - t ^= E_KEY[6 * i + 3]; E_KEY[6 * i + 9] = t; \ - t ^= E_KEY[6 * i + 4]; E_KEY[6 * i + 10] = t; \ - t ^= E_KEY[6 * i + 5]; E_KEY[6 * i + 11] = t; \ -} +#define star_x(x) (((x) & 0x7f7f7f7f) << 1) ^ ((((x) & 0x80808080) >> 7) * 0x1b) -#define loop8(i) \ -{ t = ror32(t, 8); ; t = ls_box(t) ^ rco_tab[i]; \ - t ^= E_KEY[8 * i]; E_KEY[8 * i + 8] = t; \ - t ^= E_KEY[8 * i + 1]; E_KEY[8 * i + 9] = t; \ - t ^= E_KEY[8 * i + 2]; E_KEY[8 * i + 10] = t; \ - t ^= E_KEY[8 * i + 3]; E_KEY[8 * i + 11] = t; \ - t = E_KEY[8 * i + 4] ^ ls_box(t); \ - E_KEY[8 * i + 12] = t; \ - t ^= E_KEY[8 * i + 5]; E_KEY[8 * i + 13] = t; \ - t ^= E_KEY[8 * i + 6]; E_KEY[8 * i + 14] = t; \ - t ^= E_KEY[8 * i + 7]; E_KEY[8 * i + 15] = t; \ -} +#define imix_col(y,x) do { \ + u = star_x(x); \ + v = star_x(u); \ + w = star_x(v); \ + t = w ^ (x); \ + (y) = u ^ v ^ w; \ + (y) ^= ror32(u ^ t, 8) ^ \ + ror32(v ^ t, 16) ^ \ + ror32(t, 24); \ +} while (0) + +#define ls_box(x) \ + fl_tab[0][byte(x, 0)] ^ \ + fl_tab[1][byte(x, 1)] ^ \ + fl_tab[2][byte(x, 2)] ^ \ + fl_tab[3][byte(x, 3)] + +#define loop4(i) do { \ + t = ror32(t, 8); \ + t = ls_box(t) ^ rco_tab[i]; \ + t ^= E_KEY[4 * i]; \ + E_KEY[4 * i + 4] = t; \ + t ^= E_KEY[4 * i + 1]; \ + E_KEY[4 * i + 5] = t; \ + t ^= E_KEY[4 * i + 2]; \ + E_KEY[4 * i + 6] = t; \ + t ^= E_KEY[4 * i + 3]; \ + E_KEY[4 * i + 7] = t; \ +} while (0) + +#define loop6(i) do { \ + t = ror32(t, 8); \ + t = ls_box(t) ^ rco_tab[i]; \ + t ^= E_KEY[6 * i]; \ + E_KEY[6 * i + 6] = t; \ + t ^= E_KEY[6 * i + 1]; \ + E_KEY[6 * i + 7] = t; \ + t ^= E_KEY[6 * i + 2]; \ + E_KEY[6 * i + 8] = t; \ + t ^= E_KEY[6 * i + 3]; \ + E_KEY[6 * i + 9] = t; \ + t ^= E_KEY[6 * i + 4]; \ + E_KEY[6 * i + 10] = t; \ + t ^= E_KEY[6 * i + 5]; \ + E_KEY[6 * i + 11] = t; \ +} while (0) + +#define loop8(i) do { \ + t = ror32(t, 8); \ + t = ls_box(t) ^ rco_tab[i]; \ + t ^= E_KEY[8 * i]; \ + E_KEY[8 * i + 8] = t; \ + t ^= E_KEY[8 * i + 1]; \ + E_KEY[8 * i + 9] = t; \ + t ^= E_KEY[8 * i + 2]; \ + E_KEY[8 * i + 10] = t; \ + t ^= E_KEY[8 * i + 3]; \ + E_KEY[8 * i + 11] = t; \ + t = E_KEY[8 * i + 4] ^ ls_box(t); \ + E_KEY[8 * i + 12] = t; \ + t ^= E_KEY[8 * i + 5]; \ + E_KEY[8 * i + 13] = t; \ + t ^= E_KEY[8 * i + 6]; \ + E_KEY[8 * i + 14] = t; \ + t ^= E_KEY[8 * i + 7]; \ + E_KEY[8 * i + 15] = t; \ +} while (0) static int aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, - unsigned int key_len) + unsigned int key_len) { struct aes_ctx *ctx = crypto_tfm_ctx(tfm); const __le32 *key = (const __le32 *)in_key; @@ -268,14 +264,14 @@ static int aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, case 16: t = E_KEY[3]; for (i = 0; i < 10; ++i) - loop4 (i); + loop4(i); break; case 24: E_KEY[4] = le32_to_cpu(key[4]); t = E_KEY[5] = le32_to_cpu(key[5]); for (i = 0; i < 8; ++i) - loop6 (i); + loop6(i); break; case 32: @@ -284,7 +280,7 @@ static int aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, E_KEY[6] = le32_to_cpu(key[6]); t = E_KEY[7] = le32_to_cpu(key[7]); for (i = 0; i < 7; ++i) - loop8 (i); + loop8(i); break; } @@ -294,7 +290,7 @@ static int aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, D_KEY[3] = E_KEY[3]; for (i = 4; i < key_len + 24; ++i) { - imix_col (D_KEY[i], E_KEY[i]); + imix_col(D_KEY[i], E_KEY[i]); } return 0; @@ -302,18 +298,34 @@ static int aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, /* encrypt a block of text */ -#define f_nround(bo, bi, k) \ - f_rn(bo, bi, 0, k); \ - f_rn(bo, bi, 1, k); \ - f_rn(bo, bi, 2, k); \ - f_rn(bo, bi, 3, k); \ - k += 4 - -#define f_lround(bo, bi, k) \ - f_rl(bo, bi, 0, k); \ - f_rl(bo, bi, 1, k); \ - f_rl(bo, bi, 2, k); \ - f_rl(bo, bi, 3, k) +#define f_rn(bo, bi, n, k) do { \ + bo[n] = ft_tab[0][byte(bi[n], 0)] ^ \ + ft_tab[1][byte(bi[(n + 1) & 3], 1)] ^ \ + ft_tab[2][byte(bi[(n + 2) & 3], 2)] ^ \ + ft_tab[3][byte(bi[(n + 3) & 3], 3)] ^ *(k + n); \ +} while (0) + +#define f_nround(bo, bi, k) do {\ + f_rn(bo, bi, 0, k); \ + f_rn(bo, bi, 1, k); \ + f_rn(bo, bi, 2, k); \ + f_rn(bo, bi, 3, k); \ + k += 4; \ +} while (0) + +#define f_rl(bo, bi, n, k) do { \ + bo[n] = fl_tab[0][byte(bi[n], 0)] ^ \ + fl_tab[1][byte(bi[(n + 1) & 3], 1)] ^ \ + fl_tab[2][byte(bi[(n + 2) & 3], 2)] ^ \ + fl_tab[3][byte(bi[(n + 3) & 3], 3)] ^ *(k + n); \ +} while (0) + +#define f_lround(bo, bi, k) do {\ + f_rl(bo, bi, 0, k); \ + f_rl(bo, bi, 1, k); \ + f_rl(bo, bi, 2, k); \ + f_rl(bo, bi, 3, k); \ +} while (0) static void aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) { @@ -329,25 +341,25 @@ static void aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) b0[3] = le32_to_cpu(src[3]) ^ E_KEY[3]; if (ctx->key_length > 24) { - f_nround (b1, b0, kp); - f_nround (b0, b1, kp); + f_nround(b1, b0, kp); + f_nround(b0, b1, kp); } if (ctx->key_length > 16) { - f_nround (b1, b0, kp); - f_nround (b0, b1, kp); + f_nround(b1, b0, kp); + f_nround(b0, b1, kp); } - f_nround (b1, b0, kp); - f_nround (b0, b1, kp); - f_nround (b1, b0, kp); - f_nround (b0, b1, kp); - f_nround (b1, b0, kp); - f_nround (b0, b1, kp); - f_nround (b1, b0, kp); - f_nround (b0, b1, kp); - f_nround (b1, b0, kp); - f_lround (b0, b1, kp); + f_nround(b1, b0, kp); + f_nround(b0, b1, kp); + f_nround(b1, b0, kp); + f_nround(b0, b1, kp); + f_nround(b1, b0, kp); + f_nround(b0, b1, kp); + f_nround(b1, b0, kp); + f_nround(b0, b1, kp); + f_nround(b1, b0, kp); + f_lround(b0, b1, kp); dst[0] = cpu_to_le32(b0[0]); dst[1] = cpu_to_le32(b0[1]); @@ -357,18 +369,34 @@ static void aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) /* decrypt a block of text */ -#define i_nround(bo, bi, k) \ - i_rn(bo, bi, 0, k); \ - i_rn(bo, bi, 1, k); \ - i_rn(bo, bi, 2, k); \ - i_rn(bo, bi, 3, k); \ - k -= 4 - -#define i_lround(bo, bi, k) \ - i_rl(bo, bi, 0, k); \ - i_rl(bo, bi, 1, k); \ - i_rl(bo, bi, 2, k); \ - i_rl(bo, bi, 3, k) +#define i_rn(bo, bi, n, k) do { \ + bo[n] = it_tab[0][byte(bi[n], 0)] ^ \ + it_tab[1][byte(bi[(n + 3) & 3], 1)] ^ \ + it_tab[2][byte(bi[(n + 2) & 3], 2)] ^ \ + it_tab[3][byte(bi[(n + 1) & 3], 3)] ^ *(k + n); \ +} while (0) + +#define i_nround(bo, bi, k) do {\ + i_rn(bo, bi, 0, k); \ + i_rn(bo, bi, 1, k); \ + i_rn(bo, bi, 2, k); \ + i_rn(bo, bi, 3, k); \ + k -= 4; \ +} while (0) + +#define i_rl(bo, bi, n, k) do { \ + bo[n] = il_tab[0][byte(bi[n], 0)] ^ \ + il_tab[1][byte(bi[(n + 3) & 3], 1)] ^ \ + il_tab[2][byte(bi[(n + 2) & 3], 2)] ^ \ + il_tab[3][byte(bi[(n + 1) & 3], 3)] ^ *(k + n); \ +} while (0) + +#define i_lround(bo, bi, k) do {\ + i_rl(bo, bi, 0, k); \ + i_rl(bo, bi, 1, k); \ + i_rl(bo, bi, 2, k); \ + i_rl(bo, bi, 3, k); \ +} while (0) static void aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) { @@ -385,25 +413,25 @@ static void aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) b0[3] = le32_to_cpu(src[3]) ^ E_KEY[key_len + 27]; if (key_len > 24) { - i_nround (b1, b0, kp); - i_nround (b0, b1, kp); + i_nround(b1, b0, kp); + i_nround(b0, b1, kp); } if (key_len > 16) { - i_nround (b1, b0, kp); - i_nround (b0, b1, kp); + i_nround(b1, b0, kp); + i_nround(b0, b1, kp); } - i_nround (b1, b0, kp); - i_nround (b0, b1, kp); - i_nround (b1, b0, kp); - i_nround (b0, b1, kp); - i_nround (b1, b0, kp); - i_nround (b0, b1, kp); - i_nround (b1, b0, kp); - i_nround (b0, b1, kp); - i_nround (b1, b0, kp); - i_lround (b0, b1, kp); + i_nround(b1, b0, kp); + i_nround(b0, b1, kp); + i_nround(b1, b0, kp); + i_nround(b0, b1, kp); + i_nround(b1, b0, kp); + i_nround(b0, b1, kp); + i_nround(b1, b0, kp); + i_nround(b0, b1, kp); + i_nround(b1, b0, kp); + i_lround(b0, b1, kp); dst[0] = cpu_to_le32(b0[0]); dst[1] = cpu_to_le32(b0[1]); @@ -411,7 +439,6 @@ static void aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) dst[3] = cpu_to_le32(b0[3]); } - static struct crypto_alg aes_alg = { .cra_name = "aes", .cra_driver_name = "aes-generic", @@ -426,9 +453,9 @@ static struct crypto_alg aes_alg = { .cipher = { .cia_min_keysize = AES_MIN_KEY_SIZE, .cia_max_keysize = AES_MAX_KEY_SIZE, - .cia_setkey = aes_set_key, - .cia_encrypt = aes_encrypt, - .cia_decrypt = aes_decrypt + .cia_setkey = aes_set_key, + .cia_encrypt = aes_encrypt, + .cia_decrypt = aes_decrypt } } }; -- cgit v1.2.3-59-g8ed1b From 96e82e4551d38e0863b366a7b61185bc4a9946cc Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Thu, 8 Nov 2007 21:20:30 +0800 Subject: [CRYPTO] aes-generic: Make key generation exportable This patch exports four tables and the set_key() routine. This ressources can be shared by other AES implementations (aes-x86_64 for instance). The decryption key has been turned around (deckey[0] is the first piece of the key instead of deckey[keylen+20]). The encrypt/decrypt functions are looking now identical (except they are using different tables and key). Signed-off-by: Sebastian Siewior Signed-off-by: Herbert Xu --- crypto/aes_generic.c | 249 +++++++++++++++++++++++++-------------------------- include/crypto/aes.h | 16 ++++ 2 files changed, 136 insertions(+), 129 deletions(-) diff --git a/crypto/aes_generic.c b/crypto/aes_generic.c index df8df4d346d2..cf30af74480f 100644 --- a/crypto/aes_generic.c +++ b/crypto/aes_generic.c @@ -47,11 +47,6 @@ * --------------------------------------------------------------------------- */ -/* Some changes from the Gladman version: - s/RIJNDAEL(e_key)/E_KEY/g - s/RIJNDAEL(d_key)/D_KEY/g -*/ - #include #include #include @@ -60,32 +55,26 @@ #include #include -/* - * #define byte(x, nr) ((unsigned char)((x) >> (nr*8))) - */ static inline u8 byte(const u32 x, const unsigned n) { return x >> (n << 3); } -struct aes_ctx { - int key_length; - u32 buf[120]; -}; - -#define E_KEY (&ctx->buf[0]) -#define D_KEY (&ctx->buf[60]) - static u8 pow_tab[256] __initdata; static u8 log_tab[256] __initdata; static u8 sbx_tab[256] __initdata; static u8 isb_tab[256] __initdata; static u32 rco_tab[10]; -static u32 ft_tab[4][256]; -static u32 it_tab[4][256]; -static u32 fl_tab[4][256]; -static u32 il_tab[4][256]; +u32 crypto_ft_tab[4][256]; +u32 crypto_fl_tab[4][256]; +u32 crypto_it_tab[4][256]; +u32 crypto_il_tab[4][256]; + +EXPORT_SYMBOL_GPL(crypto_ft_tab); +EXPORT_SYMBOL_GPL(crypto_fl_tab); +EXPORT_SYMBOL_GPL(crypto_it_tab); +EXPORT_SYMBOL_GPL(crypto_il_tab); static inline u8 __init f_mult(u8 a, u8 b) { @@ -134,37 +123,37 @@ static void __init gen_tabs(void) p = sbx_tab[i]; t = p; - fl_tab[0][i] = t; - fl_tab[1][i] = rol32(t, 8); - fl_tab[2][i] = rol32(t, 16); - fl_tab[3][i] = rol32(t, 24); + crypto_fl_tab[0][i] = t; + crypto_fl_tab[1][i] = rol32(t, 8); + crypto_fl_tab[2][i] = rol32(t, 16); + crypto_fl_tab[3][i] = rol32(t, 24); t = ((u32) ff_mult(2, p)) | ((u32) p << 8) | ((u32) p << 16) | ((u32) ff_mult(3, p) << 24); - ft_tab[0][i] = t; - ft_tab[1][i] = rol32(t, 8); - ft_tab[2][i] = rol32(t, 16); - ft_tab[3][i] = rol32(t, 24); + crypto_ft_tab[0][i] = t; + crypto_ft_tab[1][i] = rol32(t, 8); + crypto_ft_tab[2][i] = rol32(t, 16); + crypto_ft_tab[3][i] = rol32(t, 24); p = isb_tab[i]; t = p; - il_tab[0][i] = t; - il_tab[1][i] = rol32(t, 8); - il_tab[2][i] = rol32(t, 16); - il_tab[3][i] = rol32(t, 24); + crypto_il_tab[0][i] = t; + crypto_il_tab[1][i] = rol32(t, 8); + crypto_il_tab[2][i] = rol32(t, 16); + crypto_il_tab[3][i] = rol32(t, 24); t = ((u32) ff_mult(14, p)) | ((u32) ff_mult(9, p) << 8) | ((u32) ff_mult(13, p) << 16) | ((u32) ff_mult(11, p) << 24); - it_tab[0][i] = t; - it_tab[1][i] = rol32(t, 8); - it_tab[2][i] = rol32(t, 16); - it_tab[3][i] = rol32(t, 24); + crypto_it_tab[0][i] = t; + crypto_it_tab[1][i] = rol32(t, 8); + crypto_it_tab[2][i] = rol32(t, 16); + crypto_it_tab[3][i] = rol32(t, 24); } } @@ -184,69 +173,69 @@ static void __init gen_tabs(void) } while (0) #define ls_box(x) \ - fl_tab[0][byte(x, 0)] ^ \ - fl_tab[1][byte(x, 1)] ^ \ - fl_tab[2][byte(x, 2)] ^ \ - fl_tab[3][byte(x, 3)] + crypto_fl_tab[0][byte(x, 0)] ^ \ + crypto_fl_tab[1][byte(x, 1)] ^ \ + crypto_fl_tab[2][byte(x, 2)] ^ \ + crypto_fl_tab[3][byte(x, 3)] #define loop4(i) do { \ t = ror32(t, 8); \ t = ls_box(t) ^ rco_tab[i]; \ - t ^= E_KEY[4 * i]; \ - E_KEY[4 * i + 4] = t; \ - t ^= E_KEY[4 * i + 1]; \ - E_KEY[4 * i + 5] = t; \ - t ^= E_KEY[4 * i + 2]; \ - E_KEY[4 * i + 6] = t; \ - t ^= E_KEY[4 * i + 3]; \ - E_KEY[4 * i + 7] = t; \ + t ^= ctx->key_enc[4 * i]; \ + ctx->key_enc[4 * i + 4] = t; \ + t ^= ctx->key_enc[4 * i + 1]; \ + ctx->key_enc[4 * i + 5] = t; \ + t ^= ctx->key_enc[4 * i + 2]; \ + ctx->key_enc[4 * i + 6] = t; \ + t ^= ctx->key_enc[4 * i + 3]; \ + ctx->key_enc[4 * i + 7] = t; \ } while (0) #define loop6(i) do { \ t = ror32(t, 8); \ t = ls_box(t) ^ rco_tab[i]; \ - t ^= E_KEY[6 * i]; \ - E_KEY[6 * i + 6] = t; \ - t ^= E_KEY[6 * i + 1]; \ - E_KEY[6 * i + 7] = t; \ - t ^= E_KEY[6 * i + 2]; \ - E_KEY[6 * i + 8] = t; \ - t ^= E_KEY[6 * i + 3]; \ - E_KEY[6 * i + 9] = t; \ - t ^= E_KEY[6 * i + 4]; \ - E_KEY[6 * i + 10] = t; \ - t ^= E_KEY[6 * i + 5]; \ - E_KEY[6 * i + 11] = t; \ + t ^= ctx->key_enc[6 * i]; \ + ctx->key_enc[6 * i + 6] = t; \ + t ^= ctx->key_enc[6 * i + 1]; \ + ctx->key_enc[6 * i + 7] = t; \ + t ^= ctx->key_enc[6 * i + 2]; \ + ctx->key_enc[6 * i + 8] = t; \ + t ^= ctx->key_enc[6 * i + 3]; \ + ctx->key_enc[6 * i + 9] = t; \ + t ^= ctx->key_enc[6 * i + 4]; \ + ctx->key_enc[6 * i + 10] = t; \ + t ^= ctx->key_enc[6 * i + 5]; \ + ctx->key_enc[6 * i + 11] = t; \ } while (0) #define loop8(i) do { \ t = ror32(t, 8); \ t = ls_box(t) ^ rco_tab[i]; \ - t ^= E_KEY[8 * i]; \ - E_KEY[8 * i + 8] = t; \ - t ^= E_KEY[8 * i + 1]; \ - E_KEY[8 * i + 9] = t; \ - t ^= E_KEY[8 * i + 2]; \ - E_KEY[8 * i + 10] = t; \ - t ^= E_KEY[8 * i + 3]; \ - E_KEY[8 * i + 11] = t; \ - t = E_KEY[8 * i + 4] ^ ls_box(t); \ - E_KEY[8 * i + 12] = t; \ - t ^= E_KEY[8 * i + 5]; \ - E_KEY[8 * i + 13] = t; \ - t ^= E_KEY[8 * i + 6]; \ - E_KEY[8 * i + 14] = t; \ - t ^= E_KEY[8 * i + 7]; \ - E_KEY[8 * i + 15] = t; \ + t ^= ctx->key_enc[8 * i]; \ + ctx->key_enc[8 * i + 8] = t; \ + t ^= ctx->key_enc[8 * i + 1]; \ + ctx->key_enc[8 * i + 9] = t; \ + t ^= ctx->key_enc[8 * i + 2]; \ + ctx->key_enc[8 * i + 10] = t; \ + t ^= ctx->key_enc[8 * i + 3]; \ + ctx->key_enc[8 * i + 11] = t; \ + t = ctx->key_enc[8 * i + 4] ^ ls_box(t); \ + ctx->key_enc[8 * i + 12] = t; \ + t ^= ctx->key_enc[8 * i + 5]; \ + ctx->key_enc[8 * i + 13] = t; \ + t ^= ctx->key_enc[8 * i + 6]; \ + ctx->key_enc[8 * i + 14] = t; \ + t ^= ctx->key_enc[8 * i + 7]; \ + ctx->key_enc[8 * i + 15] = t; \ } while (0) -static int aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, +int crypto_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, unsigned int key_len) { - struct aes_ctx *ctx = crypto_tfm_ctx(tfm); + struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm); const __le32 *key = (const __le32 *)in_key; u32 *flags = &tfm->crt_flags; - u32 i, t, u, v, w; + u32 i, t, u, v, w, j; if (key_len % 8) { *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; @@ -255,54 +244,55 @@ static int aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, ctx->key_length = key_len; - E_KEY[0] = le32_to_cpu(key[0]); - E_KEY[1] = le32_to_cpu(key[1]); - E_KEY[2] = le32_to_cpu(key[2]); - E_KEY[3] = le32_to_cpu(key[3]); + ctx->key_dec[key_len + 24] = ctx->key_enc[0] = le32_to_cpu(key[0]); + ctx->key_dec[key_len + 25] = ctx->key_enc[1] = le32_to_cpu(key[1]); + ctx->key_dec[key_len + 26] = ctx->key_enc[2] = le32_to_cpu(key[2]); + ctx->key_dec[key_len + 27] = ctx->key_enc[3] = le32_to_cpu(key[3]); switch (key_len) { case 16: - t = E_KEY[3]; + t = ctx->key_enc[3]; for (i = 0; i < 10; ++i) loop4(i); break; case 24: - E_KEY[4] = le32_to_cpu(key[4]); - t = E_KEY[5] = le32_to_cpu(key[5]); + ctx->key_enc[4] = le32_to_cpu(key[4]); + t = ctx->key_enc[5] = le32_to_cpu(key[5]); for (i = 0; i < 8; ++i) loop6(i); break; case 32: - E_KEY[4] = le32_to_cpu(key[4]); - E_KEY[5] = le32_to_cpu(key[5]); - E_KEY[6] = le32_to_cpu(key[6]); - t = E_KEY[7] = le32_to_cpu(key[7]); + ctx->key_enc[4] = le32_to_cpu(key[4]); + ctx->key_enc[5] = le32_to_cpu(key[5]); + ctx->key_enc[6] = le32_to_cpu(key[6]); + t = ctx->key_enc[7] = le32_to_cpu(key[7]); for (i = 0; i < 7; ++i) loop8(i); break; } - D_KEY[0] = E_KEY[0]; - D_KEY[1] = E_KEY[1]; - D_KEY[2] = E_KEY[2]; - D_KEY[3] = E_KEY[3]; + ctx->key_dec[0] = ctx->key_enc[key_len + 24]; + ctx->key_dec[1] = ctx->key_enc[key_len + 25]; + ctx->key_dec[2] = ctx->key_enc[key_len + 26]; + ctx->key_dec[3] = ctx->key_enc[key_len + 27]; for (i = 4; i < key_len + 24; ++i) { - imix_col(D_KEY[i], E_KEY[i]); + j = key_len + 24 - (i & ~3) + (i & 3); + imix_col(ctx->key_dec[j], ctx->key_enc[i]); } - return 0; } +EXPORT_SYMBOL_GPL(crypto_aes_set_key); /* encrypt a block of text */ #define f_rn(bo, bi, n, k) do { \ - bo[n] = ft_tab[0][byte(bi[n], 0)] ^ \ - ft_tab[1][byte(bi[(n + 1) & 3], 1)] ^ \ - ft_tab[2][byte(bi[(n + 2) & 3], 2)] ^ \ - ft_tab[3][byte(bi[(n + 3) & 3], 3)] ^ *(k + n); \ + bo[n] = crypto_ft_tab[0][byte(bi[n], 0)] ^ \ + crypto_ft_tab[1][byte(bi[(n + 1) & 3], 1)] ^ \ + crypto_ft_tab[2][byte(bi[(n + 2) & 3], 2)] ^ \ + crypto_ft_tab[3][byte(bi[(n + 3) & 3], 3)] ^ *(k + n); \ } while (0) #define f_nround(bo, bi, k) do {\ @@ -314,10 +304,10 @@ static int aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, } while (0) #define f_rl(bo, bi, n, k) do { \ - bo[n] = fl_tab[0][byte(bi[n], 0)] ^ \ - fl_tab[1][byte(bi[(n + 1) & 3], 1)] ^ \ - fl_tab[2][byte(bi[(n + 2) & 3], 2)] ^ \ - fl_tab[3][byte(bi[(n + 3) & 3], 3)] ^ *(k + n); \ + bo[n] = crypto_fl_tab[0][byte(bi[n], 0)] ^ \ + crypto_fl_tab[1][byte(bi[(n + 1) & 3], 1)] ^ \ + crypto_fl_tab[2][byte(bi[(n + 2) & 3], 2)] ^ \ + crypto_fl_tab[3][byte(bi[(n + 3) & 3], 3)] ^ *(k + n); \ } while (0) #define f_lround(bo, bi, k) do {\ @@ -329,23 +319,24 @@ static int aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, static void aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) { - const struct aes_ctx *ctx = crypto_tfm_ctx(tfm); + const struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm); const __le32 *src = (const __le32 *)in; __le32 *dst = (__le32 *)out; u32 b0[4], b1[4]; - const u32 *kp = E_KEY + 4; + const u32 *kp = ctx->key_enc + 4; + const int key_len = ctx->key_length; - b0[0] = le32_to_cpu(src[0]) ^ E_KEY[0]; - b0[1] = le32_to_cpu(src[1]) ^ E_KEY[1]; - b0[2] = le32_to_cpu(src[2]) ^ E_KEY[2]; - b0[3] = le32_to_cpu(src[3]) ^ E_KEY[3]; + b0[0] = le32_to_cpu(src[0]) ^ ctx->key_enc[0]; + b0[1] = le32_to_cpu(src[1]) ^ ctx->key_enc[1]; + b0[2] = le32_to_cpu(src[2]) ^ ctx->key_enc[2]; + b0[3] = le32_to_cpu(src[3]) ^ ctx->key_enc[3]; - if (ctx->key_length > 24) { + if (key_len > 24) { f_nround(b1, b0, kp); f_nround(b0, b1, kp); } - if (ctx->key_length > 16) { + if (key_len > 16) { f_nround(b1, b0, kp); f_nround(b0, b1, kp); } @@ -370,10 +361,10 @@ static void aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) /* decrypt a block of text */ #define i_rn(bo, bi, n, k) do { \ - bo[n] = it_tab[0][byte(bi[n], 0)] ^ \ - it_tab[1][byte(bi[(n + 3) & 3], 1)] ^ \ - it_tab[2][byte(bi[(n + 2) & 3], 2)] ^ \ - it_tab[3][byte(bi[(n + 1) & 3], 3)] ^ *(k + n); \ + bo[n] = crypto_it_tab[0][byte(bi[n], 0)] ^ \ + crypto_it_tab[1][byte(bi[(n + 3) & 3], 1)] ^ \ + crypto_it_tab[2][byte(bi[(n + 2) & 3], 2)] ^ \ + crypto_it_tab[3][byte(bi[(n + 1) & 3], 3)] ^ *(k + n); \ } while (0) #define i_nround(bo, bi, k) do {\ @@ -381,14 +372,14 @@ static void aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) i_rn(bo, bi, 1, k); \ i_rn(bo, bi, 2, k); \ i_rn(bo, bi, 3, k); \ - k -= 4; \ + k += 4; \ } while (0) #define i_rl(bo, bi, n, k) do { \ - bo[n] = il_tab[0][byte(bi[n], 0)] ^ \ - il_tab[1][byte(bi[(n + 3) & 3], 1)] ^ \ - il_tab[2][byte(bi[(n + 2) & 3], 2)] ^ \ - il_tab[3][byte(bi[(n + 1) & 3], 3)] ^ *(k + n); \ + bo[n] = crypto_il_tab[0][byte(bi[n], 0)] ^ \ + crypto_il_tab[1][byte(bi[(n + 3) & 3], 1)] ^ \ + crypto_il_tab[2][byte(bi[(n + 2) & 3], 2)] ^ \ + crypto_il_tab[3][byte(bi[(n + 1) & 3], 3)] ^ *(k + n); \ } while (0) #define i_lround(bo, bi, k) do {\ @@ -400,17 +391,17 @@ static void aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) static void aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) { - const struct aes_ctx *ctx = crypto_tfm_ctx(tfm); + const struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm); const __le32 *src = (const __le32 *)in; __le32 *dst = (__le32 *)out; u32 b0[4], b1[4]; const int key_len = ctx->key_length; - const u32 *kp = D_KEY + key_len + 20; + const u32 *kp = ctx->key_dec + 4; - b0[0] = le32_to_cpu(src[0]) ^ E_KEY[key_len + 24]; - b0[1] = le32_to_cpu(src[1]) ^ E_KEY[key_len + 25]; - b0[2] = le32_to_cpu(src[2]) ^ E_KEY[key_len + 26]; - b0[3] = le32_to_cpu(src[3]) ^ E_KEY[key_len + 27]; + b0[0] = le32_to_cpu(src[0]) ^ ctx->key_dec[0]; + b0[1] = le32_to_cpu(src[1]) ^ ctx->key_dec[1]; + b0[2] = le32_to_cpu(src[2]) ^ ctx->key_dec[2]; + b0[3] = le32_to_cpu(src[3]) ^ ctx->key_dec[3]; if (key_len > 24) { i_nround(b1, b0, kp); @@ -445,7 +436,7 @@ static struct crypto_alg aes_alg = { .cra_priority = 100, .cra_flags = CRYPTO_ALG_TYPE_CIPHER, .cra_blocksize = AES_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct aes_ctx), + .cra_ctxsize = sizeof(struct crypto_aes_ctx), .cra_alignmask = 3, .cra_module = THIS_MODULE, .cra_list = LIST_HEAD_INIT(aes_alg.cra_list), @@ -453,7 +444,7 @@ static struct crypto_alg aes_alg = { .cipher = { .cia_min_keysize = AES_MIN_KEY_SIZE, .cia_max_keysize = AES_MAX_KEY_SIZE, - .cia_setkey = aes_set_key, + .cia_setkey = crypto_aes_set_key, .cia_encrypt = aes_encrypt, .cia_decrypt = aes_decrypt } diff --git a/include/crypto/aes.h b/include/crypto/aes.h index 9ff842fc6b89..d480b76715a8 100644 --- a/include/crypto/aes.h +++ b/include/crypto/aes.h @@ -5,6 +5,9 @@ #ifndef _CRYPTO_AES_H #define _CRYPTO_AES_H +#include +#include + #define AES_MIN_KEY_SIZE 16 #define AES_MAX_KEY_SIZE 32 #define AES_KEYSIZE_128 16 @@ -12,4 +15,17 @@ #define AES_KEYSIZE_256 32 #define AES_BLOCK_SIZE 16 +struct crypto_aes_ctx { + u32 key_length; + u32 key_enc[60]; + u32 key_dec[60]; +}; + +extern u32 crypto_ft_tab[4][256]; +extern u32 crypto_fl_tab[4][256]; +extern u32 crypto_it_tab[4][256]; +extern u32 crypto_il_tab[4][256]; + +int crypto_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, + unsigned int key_len); #endif -- cgit v1.2.3-59-g8ed1b From 81190b321548bb0bf2d6e1f172695275b0fd1363 Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Thu, 8 Nov 2007 21:25:04 +0800 Subject: [CRYPTO] aes-x86-64: Remove setkey The setkey() function can be shared with the generic algorithm. Signed-off-by: Sebastian Siewior Signed-off-by: Herbert Xu --- arch/x86/crypto/aes-x86_64-asm_64.S | 68 ++++----- arch/x86/crypto/aes_64.c | 282 +----------------------------------- crypto/Kconfig | 1 + 3 files changed, 38 insertions(+), 313 deletions(-) diff --git a/arch/x86/crypto/aes-x86_64-asm_64.S b/arch/x86/crypto/aes-x86_64-asm_64.S index 26b40de4d0b0..a120f526c3df 100644 --- a/arch/x86/crypto/aes-x86_64-asm_64.S +++ b/arch/x86/crypto/aes-x86_64-asm_64.S @@ -8,10 +8,10 @@ * including this sentence is retained in full. */ -.extern aes_ft_tab -.extern aes_it_tab -.extern aes_fl_tab -.extern aes_il_tab +.extern crypto_ft_tab +.extern crypto_it_tab +.extern crypto_fl_tab +.extern crypto_il_tab .text @@ -56,13 +56,13 @@ .align 8; \ FUNC: movq r1,r2; \ movq r3,r4; \ - leaq BASE+KEY+52(r8),r9; \ + leaq BASE+KEY+48+4(r8),r9; \ movq r10,r11; \ movl (r7),r5 ## E; \ movl 4(r7),r1 ## E; \ movl 8(r7),r6 ## E; \ movl 12(r7),r7 ## E; \ - movl BASE(r8),r10 ## E; \ + movl BASE+0(r8),r10 ## E; \ xorl -48(r9),r5 ## E; \ xorl -44(r9),r1 ## E; \ xorl -40(r9),r6 ## E; \ @@ -154,37 +154,37 @@ FUNC: movq r1,r2; \ /* void aes_enc_blk(stuct crypto_tfm *tfm, u8 *out, const u8 *in) */ entry(aes_enc_blk,0,enc128,enc192) - encrypt_round(aes_ft_tab,-96) - encrypt_round(aes_ft_tab,-80) -enc192: encrypt_round(aes_ft_tab,-64) - encrypt_round(aes_ft_tab,-48) -enc128: encrypt_round(aes_ft_tab,-32) - encrypt_round(aes_ft_tab,-16) - encrypt_round(aes_ft_tab, 0) - encrypt_round(aes_ft_tab, 16) - encrypt_round(aes_ft_tab, 32) - encrypt_round(aes_ft_tab, 48) - encrypt_round(aes_ft_tab, 64) - encrypt_round(aes_ft_tab, 80) - encrypt_round(aes_ft_tab, 96) - encrypt_final(aes_fl_tab,112) + encrypt_round(crypto_ft_tab,-96) + encrypt_round(crypto_ft_tab,-80) +enc192: encrypt_round(crypto_ft_tab,-64) + encrypt_round(crypto_ft_tab,-48) +enc128: encrypt_round(crypto_ft_tab,-32) + encrypt_round(crypto_ft_tab,-16) + encrypt_round(crypto_ft_tab, 0) + encrypt_round(crypto_ft_tab, 16) + encrypt_round(crypto_ft_tab, 32) + encrypt_round(crypto_ft_tab, 48) + encrypt_round(crypto_ft_tab, 64) + encrypt_round(crypto_ft_tab, 80) + encrypt_round(crypto_ft_tab, 96) + encrypt_final(crypto_fl_tab,112) return /* void aes_dec_blk(struct crypto_tfm *tfm, u8 *out, const u8 *in) */ entry(aes_dec_blk,240,dec128,dec192) - decrypt_round(aes_it_tab,-96) - decrypt_round(aes_it_tab,-80) -dec192: decrypt_round(aes_it_tab,-64) - decrypt_round(aes_it_tab,-48) -dec128: decrypt_round(aes_it_tab,-32) - decrypt_round(aes_it_tab,-16) - decrypt_round(aes_it_tab, 0) - decrypt_round(aes_it_tab, 16) - decrypt_round(aes_it_tab, 32) - decrypt_round(aes_it_tab, 48) - decrypt_round(aes_it_tab, 64) - decrypt_round(aes_it_tab, 80) - decrypt_round(aes_it_tab, 96) - decrypt_final(aes_il_tab,112) + decrypt_round(crypto_it_tab,-96) + decrypt_round(crypto_it_tab,-80) +dec192: decrypt_round(crypto_it_tab,-64) + decrypt_round(crypto_it_tab,-48) +dec128: decrypt_round(crypto_it_tab,-32) + decrypt_round(crypto_it_tab,-16) + decrypt_round(crypto_it_tab, 0) + decrypt_round(crypto_it_tab, 16) + decrypt_round(crypto_it_tab, 32) + decrypt_round(crypto_it_tab, 48) + decrypt_round(crypto_it_tab, 64) + decrypt_round(crypto_it_tab, 80) + decrypt_round(crypto_it_tab, 96) + decrypt_final(crypto_il_tab,112) return diff --git a/arch/x86/crypto/aes_64.c b/arch/x86/crypto/aes_64.c index 0b38a4cd2ce1..d7a41a97dd3f 100644 --- a/arch/x86/crypto/aes_64.c +++ b/arch/x86/crypto/aes_64.c @@ -1,284 +1,9 @@ /* - * Cryptographic API. + * Glue Code for AES Cipher Algorithm * - * AES Cipher Algorithm. - * - * Based on Brian Gladman's code. - * - * Linux developers: - * Alexander Kjeldaas - * Herbert Valerio Riedel - * Kyle McMartin - * Adam J. Richter (conversion to 2.5 API). - * Andreas Steinmetz (adapted to x86_64 assembler) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * --------------------------------------------------------------------------- - * Copyright (c) 2002, Dr Brian Gladman , Worcester, UK. - * All rights reserved. - * - * LICENSE TERMS - * - * The free distribution and use of this software in both source and binary - * form is allowed (with or without changes) provided that: - * - * 1. distributions of this source code include the above copyright - * notice, this list of conditions and the following disclaimer; - * - * 2. distributions in binary form include the above copyright - * notice, this list of conditions and the following disclaimer - * in the documentation and/or other associated materials; - * - * 3. the copyright holder's name is not used to endorse products - * built using this software without specific written permission. - * - * ALTERNATIVELY, provided that this notice is retained in full, this product - * may be distributed under the terms of the GNU General Public License (GPL), - * in which case the provisions of the GPL apply INSTEAD OF those given above. - * - * DISCLAIMER - * - * This software is provided 'as is' with no explicit or implied warranties - * in respect of its properties, including, but not limited to, correctness - * and/or fitness for purpose. - * --------------------------------------------------------------------------- */ -/* Some changes from the Gladman version: - s/RIJNDAEL(e_key)/E_KEY/g - s/RIJNDAEL(d_key)/D_KEY/g -*/ - -#include #include -#include -#include -#include -#include -#include -#include - -/* - * #define byte(x, nr) ((unsigned char)((x) >> (nr*8))) - */ -static inline u8 byte(const u32 x, const unsigned n) -{ - return x >> (n << 3); -} - -struct aes_ctx -{ - u32 key_length; - u32 buf[120]; -}; - -#define E_KEY (&ctx->buf[0]) -#define D_KEY (&ctx->buf[60]) - -static u8 pow_tab[256] __initdata; -static u8 log_tab[256] __initdata; -static u8 sbx_tab[256] __initdata; -static u8 isb_tab[256] __initdata; -static u32 rco_tab[10]; -u32 aes_ft_tab[4][256]; -u32 aes_it_tab[4][256]; - -u32 aes_fl_tab[4][256]; -u32 aes_il_tab[4][256]; - -static inline u8 f_mult(u8 a, u8 b) -{ - u8 aa = log_tab[a], cc = aa + log_tab[b]; - - return pow_tab[cc + (cc < aa ? 1 : 0)]; -} - -#define ff_mult(a, b) (a && b ? f_mult(a, b) : 0) - -#define ls_box(x) \ - (aes_fl_tab[0][byte(x, 0)] ^ \ - aes_fl_tab[1][byte(x, 1)] ^ \ - aes_fl_tab[2][byte(x, 2)] ^ \ - aes_fl_tab[3][byte(x, 3)]) - -static void __init gen_tabs(void) -{ - u32 i, t; - u8 p, q; - - /* log and power tables for GF(2**8) finite field with - 0x011b as modular polynomial - the simplest primitive - root is 0x03, used here to generate the tables */ - - for (i = 0, p = 1; i < 256; ++i) { - pow_tab[i] = (u8)p; - log_tab[p] = (u8)i; - - p ^= (p << 1) ^ (p & 0x80 ? 0x01b : 0); - } - - log_tab[1] = 0; - - for (i = 0, p = 1; i < 10; ++i) { - rco_tab[i] = p; - - p = (p << 1) ^ (p & 0x80 ? 0x01b : 0); - } - - for (i = 0; i < 256; ++i) { - p = (i ? pow_tab[255 - log_tab[i]] : 0); - q = ((p >> 7) | (p << 1)) ^ ((p >> 6) | (p << 2)); - p ^= 0x63 ^ q ^ ((q >> 6) | (q << 2)); - sbx_tab[i] = p; - isb_tab[p] = (u8)i; - } - - for (i = 0; i < 256; ++i) { - p = sbx_tab[i]; - - t = p; - aes_fl_tab[0][i] = t; - aes_fl_tab[1][i] = rol32(t, 8); - aes_fl_tab[2][i] = rol32(t, 16); - aes_fl_tab[3][i] = rol32(t, 24); - - t = ((u32)ff_mult(2, p)) | - ((u32)p << 8) | - ((u32)p << 16) | ((u32)ff_mult(3, p) << 24); - - aes_ft_tab[0][i] = t; - aes_ft_tab[1][i] = rol32(t, 8); - aes_ft_tab[2][i] = rol32(t, 16); - aes_ft_tab[3][i] = rol32(t, 24); - - p = isb_tab[i]; - - t = p; - aes_il_tab[0][i] = t; - aes_il_tab[1][i] = rol32(t, 8); - aes_il_tab[2][i] = rol32(t, 16); - aes_il_tab[3][i] = rol32(t, 24); - - t = ((u32)ff_mult(14, p)) | - ((u32)ff_mult(9, p) << 8) | - ((u32)ff_mult(13, p) << 16) | - ((u32)ff_mult(11, p) << 24); - - aes_it_tab[0][i] = t; - aes_it_tab[1][i] = rol32(t, 8); - aes_it_tab[2][i] = rol32(t, 16); - aes_it_tab[3][i] = rol32(t, 24); - } -} - -#define star_x(x) (((x) & 0x7f7f7f7f) << 1) ^ ((((x) & 0x80808080) >> 7) * 0x1b) - -#define imix_col(y, x) \ - u = star_x(x); \ - v = star_x(u); \ - w = star_x(v); \ - t = w ^ (x); \ - (y) = u ^ v ^ w; \ - (y) ^= ror32(u ^ t, 8) ^ \ - ror32(v ^ t, 16) ^ \ - ror32(t, 24) - -/* initialise the key schedule from the user supplied key */ - -#define loop4(i) \ -{ \ - t = ror32(t, 8); t = ls_box(t) ^ rco_tab[i]; \ - t ^= E_KEY[4 * i]; E_KEY[4 * i + 4] = t; \ - t ^= E_KEY[4 * i + 1]; E_KEY[4 * i + 5] = t; \ - t ^= E_KEY[4 * i + 2]; E_KEY[4 * i + 6] = t; \ - t ^= E_KEY[4 * i + 3]; E_KEY[4 * i + 7] = t; \ -} - -#define loop6(i) \ -{ \ - t = ror32(t, 8); t = ls_box(t) ^ rco_tab[i]; \ - t ^= E_KEY[6 * i]; E_KEY[6 * i + 6] = t; \ - t ^= E_KEY[6 * i + 1]; E_KEY[6 * i + 7] = t; \ - t ^= E_KEY[6 * i + 2]; E_KEY[6 * i + 8] = t; \ - t ^= E_KEY[6 * i + 3]; E_KEY[6 * i + 9] = t; \ - t ^= E_KEY[6 * i + 4]; E_KEY[6 * i + 10] = t; \ - t ^= E_KEY[6 * i + 5]; E_KEY[6 * i + 11] = t; \ -} - -#define loop8(i) \ -{ \ - t = ror32(t, 8); ; t = ls_box(t) ^ rco_tab[i]; \ - t ^= E_KEY[8 * i]; E_KEY[8 * i + 8] = t; \ - t ^= E_KEY[8 * i + 1]; E_KEY[8 * i + 9] = t; \ - t ^= E_KEY[8 * i + 2]; E_KEY[8 * i + 10] = t; \ - t ^= E_KEY[8 * i + 3]; E_KEY[8 * i + 11] = t; \ - t = E_KEY[8 * i + 4] ^ ls_box(t); \ - E_KEY[8 * i + 12] = t; \ - t ^= E_KEY[8 * i + 5]; E_KEY[8 * i + 13] = t; \ - t ^= E_KEY[8 * i + 6]; E_KEY[8 * i + 14] = t; \ - t ^= E_KEY[8 * i + 7]; E_KEY[8 * i + 15] = t; \ -} - -static int aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, - unsigned int key_len) -{ - struct aes_ctx *ctx = crypto_tfm_ctx(tfm); - const __le32 *key = (const __le32 *)in_key; - u32 *flags = &tfm->crt_flags; - u32 i, j, t, u, v, w; - - if (key_len % 8) { - *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; - return -EINVAL; - } - - ctx->key_length = key_len; - - D_KEY[key_len + 24] = E_KEY[0] = le32_to_cpu(key[0]); - D_KEY[key_len + 25] = E_KEY[1] = le32_to_cpu(key[1]); - D_KEY[key_len + 26] = E_KEY[2] = le32_to_cpu(key[2]); - D_KEY[key_len + 27] = E_KEY[3] = le32_to_cpu(key[3]); - - switch (key_len) { - case 16: - t = E_KEY[3]; - for (i = 0; i < 10; ++i) - loop4(i); - break; - - case 24: - E_KEY[4] = le32_to_cpu(key[4]); - t = E_KEY[5] = le32_to_cpu(key[5]); - for (i = 0; i < 8; ++i) - loop6 (i); - break; - - case 32: - E_KEY[4] = le32_to_cpu(key[4]); - E_KEY[5] = le32_to_cpu(key[5]); - E_KEY[6] = le32_to_cpu(key[6]); - t = E_KEY[7] = le32_to_cpu(key[7]); - for (i = 0; i < 7; ++i) - loop8(i); - break; - } - - D_KEY[0] = E_KEY[key_len + 24]; - D_KEY[1] = E_KEY[key_len + 25]; - D_KEY[2] = E_KEY[key_len + 26]; - D_KEY[3] = E_KEY[key_len + 27]; - - for (i = 4; i < key_len + 24; ++i) { - j = key_len + 24 - (i & ~3) + (i & 3); - imix_col(D_KEY[j], E_KEY[i]); - } - - return 0; -} asmlinkage void aes_enc_blk(struct crypto_tfm *tfm, u8 *out, const u8 *in); asmlinkage void aes_dec_blk(struct crypto_tfm *tfm, u8 *out, const u8 *in); @@ -299,14 +24,14 @@ static struct crypto_alg aes_alg = { .cra_priority = 200, .cra_flags = CRYPTO_ALG_TYPE_CIPHER, .cra_blocksize = AES_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct aes_ctx), + .cra_ctxsize = sizeof(struct crypto_aes_ctx), .cra_module = THIS_MODULE, .cra_list = LIST_HEAD_INIT(aes_alg.cra_list), .cra_u = { .cipher = { .cia_min_keysize = AES_MIN_KEY_SIZE, .cia_max_keysize = AES_MAX_KEY_SIZE, - .cia_setkey = aes_set_key, + .cia_setkey = crypto_aes_set_key, .cia_encrypt = aes_encrypt, .cia_decrypt = aes_decrypt } @@ -315,7 +40,6 @@ static struct crypto_alg aes_alg = { static int __init aes_init(void) { - gen_tabs(); return crypto_register_alg(&aes_alg); } diff --git a/crypto/Kconfig b/crypto/Kconfig index 1f32071a3068..3f0bc0ed147d 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -350,6 +350,7 @@ config CRYPTO_AES_X86_64 tristate "AES cipher algorithms (x86_64)" depends on (X86 || UML_X86) && 64BIT select CRYPTO_ALGAPI + select CRYPTO_AES help AES cipher algorithms (FIPS-197). AES uses the Rijndael algorithm. -- cgit v1.2.3-59-g8ed1b From b345cee90a3ffec5eca6d6c1c59bd0d1feb453d4 Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Thu, 8 Nov 2007 21:27:05 +0800 Subject: [CRYPTO] ctr: Remove default M NO other block mode is M by default. Signed-off-by: Sebastian Siewior Signed-off-by: Herbert Xu --- crypto/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/crypto/Kconfig b/crypto/Kconfig index 3f0bc0ed147d..d9666e33a9f1 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -199,7 +199,6 @@ config CRYPTO_CTR tristate "CTR support" select CRYPTO_BLKCIPHER select CRYPTO_MANAGER - default m help CTR: Counter mode This block cipher algorithm is required for IPSec. -- cgit v1.2.3-59-g8ed1b From 5157dea8139cf0edc4834d528531e642c0d27e37 Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Sat, 10 Nov 2007 19:07:16 +0800 Subject: [CRYPTO] aes-i586: Remove setkey The setkey() function can be shared with the generic algorithm. Signed-off-by: Sebastian Siewior Signed-off-by: Herbert Xu --- arch/x86/crypto/aes-i586-asm_32.S | 89 ++++---- arch/x86/crypto/aes_32.c | 461 +------------------------------------- crypto/Kconfig | 1 + 3 files changed, 47 insertions(+), 504 deletions(-) diff --git a/arch/x86/crypto/aes-i586-asm_32.S b/arch/x86/crypto/aes-i586-asm_32.S index f942f0c8f630..1093bede3e0a 100644 --- a/arch/x86/crypto/aes-i586-asm_32.S +++ b/arch/x86/crypto/aes-i586-asm_32.S @@ -46,9 +46,9 @@ #define in_blk 16 /* offsets in crypto_tfm structure */ -#define ekey (crypto_tfm_ctx_offset + 0) -#define nrnd (crypto_tfm_ctx_offset + 256) -#define dkey (crypto_tfm_ctx_offset + 260) +#define klen (crypto_tfm_ctx_offset + 0) +#define ekey (crypto_tfm_ctx_offset + 4) +#define dkey (crypto_tfm_ctx_offset + 244) // register mapping for encrypt and decrypt subroutines @@ -221,8 +221,8 @@ .global aes_enc_blk -.extern ft_tab -.extern fl_tab +.extern crypto_ft_tab +.extern crypto_fl_tab .align 4 @@ -236,7 +236,7 @@ aes_enc_blk: 1: push %ebx mov in_blk+4(%esp),%r2 push %esi - mov nrnd(%ebp),%r3 // number of rounds + mov klen(%ebp),%r3 // key size push %edi #if ekey != 0 lea ekey(%ebp),%ebp // key pointer @@ -255,26 +255,26 @@ aes_enc_blk: sub $8,%esp // space for register saves on stack add $16,%ebp // increment to next round key - cmp $12,%r3 + cmp $24,%r3 jb 4f // 10 rounds for 128-bit key lea 32(%ebp),%ebp je 3f // 12 rounds for 192-bit key lea 32(%ebp),%ebp -2: fwd_rnd1( -64(%ebp) ,ft_tab) // 14 rounds for 256-bit key - fwd_rnd2( -48(%ebp) ,ft_tab) -3: fwd_rnd1( -32(%ebp) ,ft_tab) // 12 rounds for 192-bit key - fwd_rnd2( -16(%ebp) ,ft_tab) -4: fwd_rnd1( (%ebp) ,ft_tab) // 10 rounds for 128-bit key - fwd_rnd2( +16(%ebp) ,ft_tab) - fwd_rnd1( +32(%ebp) ,ft_tab) - fwd_rnd2( +48(%ebp) ,ft_tab) - fwd_rnd1( +64(%ebp) ,ft_tab) - fwd_rnd2( +80(%ebp) ,ft_tab) - fwd_rnd1( +96(%ebp) ,ft_tab) - fwd_rnd2(+112(%ebp) ,ft_tab) - fwd_rnd1(+128(%ebp) ,ft_tab) - fwd_rnd2(+144(%ebp) ,fl_tab) // last round uses a different table +2: fwd_rnd1( -64(%ebp), crypto_ft_tab) // 14 rounds for 256-bit key + fwd_rnd2( -48(%ebp), crypto_ft_tab) +3: fwd_rnd1( -32(%ebp), crypto_ft_tab) // 12 rounds for 192-bit key + fwd_rnd2( -16(%ebp), crypto_ft_tab) +4: fwd_rnd1( (%ebp), crypto_ft_tab) // 10 rounds for 128-bit key + fwd_rnd2( +16(%ebp), crypto_ft_tab) + fwd_rnd1( +32(%ebp), crypto_ft_tab) + fwd_rnd2( +48(%ebp), crypto_ft_tab) + fwd_rnd1( +64(%ebp), crypto_ft_tab) + fwd_rnd2( +80(%ebp), crypto_ft_tab) + fwd_rnd1( +96(%ebp), crypto_ft_tab) + fwd_rnd2(+112(%ebp), crypto_ft_tab) + fwd_rnd1(+128(%ebp), crypto_ft_tab) + fwd_rnd2(+144(%ebp), crypto_fl_tab) // last round uses a different table // move final values to the output array. CAUTION: the // order of these assigns rely on the register mappings @@ -297,8 +297,8 @@ aes_enc_blk: .global aes_dec_blk -.extern it_tab -.extern il_tab +.extern crypto_it_tab +.extern crypto_il_tab .align 4 @@ -312,14 +312,11 @@ aes_dec_blk: 1: push %ebx mov in_blk+4(%esp),%r2 push %esi - mov nrnd(%ebp),%r3 // number of rounds + mov klen(%ebp),%r3 // key size push %edi #if dkey != 0 lea dkey(%ebp),%ebp // key pointer #endif - mov %r3,%r0 - shl $4,%r0 - add %r0,%ebp // input four columns and xor in first round key @@ -333,27 +330,27 @@ aes_dec_blk: xor 12(%ebp),%r5 sub $8,%esp // space for register saves on stack - sub $16,%ebp // increment to next round key - cmp $12,%r3 + add $16,%ebp // increment to next round key + cmp $24,%r3 jb 4f // 10 rounds for 128-bit key - lea -32(%ebp),%ebp + lea 32(%ebp),%ebp je 3f // 12 rounds for 192-bit key - lea -32(%ebp),%ebp - -2: inv_rnd1( +64(%ebp), it_tab) // 14 rounds for 256-bit key - inv_rnd2( +48(%ebp), it_tab) -3: inv_rnd1( +32(%ebp), it_tab) // 12 rounds for 192-bit key - inv_rnd2( +16(%ebp), it_tab) -4: inv_rnd1( (%ebp), it_tab) // 10 rounds for 128-bit key - inv_rnd2( -16(%ebp), it_tab) - inv_rnd1( -32(%ebp), it_tab) - inv_rnd2( -48(%ebp), it_tab) - inv_rnd1( -64(%ebp), it_tab) - inv_rnd2( -80(%ebp), it_tab) - inv_rnd1( -96(%ebp), it_tab) - inv_rnd2(-112(%ebp), it_tab) - inv_rnd1(-128(%ebp), it_tab) - inv_rnd2(-144(%ebp), il_tab) // last round uses a different table + lea 32(%ebp),%ebp + +2: inv_rnd1( -64(%ebp), crypto_it_tab) // 14 rounds for 256-bit key + inv_rnd2( -48(%ebp), crypto_it_tab) +3: inv_rnd1( -32(%ebp), crypto_it_tab) // 12 rounds for 192-bit key + inv_rnd2( -16(%ebp), crypto_it_tab) +4: inv_rnd1( (%ebp), crypto_it_tab) // 10 rounds for 128-bit key + inv_rnd2( +16(%ebp), crypto_it_tab) + inv_rnd1( +32(%ebp), crypto_it_tab) + inv_rnd2( +48(%ebp), crypto_it_tab) + inv_rnd1( +64(%ebp), crypto_it_tab) + inv_rnd2( +80(%ebp), crypto_it_tab) + inv_rnd1( +96(%ebp), crypto_it_tab) + inv_rnd2(+112(%ebp), crypto_it_tab) + inv_rnd1(+128(%ebp), crypto_it_tab) + inv_rnd2(+144(%ebp), crypto_il_tab) // last round uses a different table // move final values to the output array. CAUTION: the // order of these assigns rely on the register mappings diff --git a/arch/x86/crypto/aes_32.c b/arch/x86/crypto/aes_32.c index 9b0ab50394b0..8556d9561c20 100644 --- a/arch/x86/crypto/aes_32.c +++ b/arch/x86/crypto/aes_32.c @@ -1,468 +1,14 @@ -/* - * +/* * Glue Code for optimized 586 assembler version of AES - * - * Copyright (c) 2002, Dr Brian Gladman <>, Worcester, UK. - * All rights reserved. - * - * LICENSE TERMS - * - * The free distribution and use of this software in both source and binary - * form is allowed (with or without changes) provided that: - * - * 1. distributions of this source code include the above copyright - * notice, this list of conditions and the following disclaimer; - * - * 2. distributions in binary form include the above copyright - * notice, this list of conditions and the following disclaimer - * in the documentation and/or other associated materials; - * - * 3. the copyright holder's name is not used to endorse products - * built using this software without specific written permission. - * - * ALTERNATIVELY, provided that this notice is retained in full, this product - * may be distributed under the terms of the GNU General Public License (GPL), - * in which case the provisions of the GPL apply INSTEAD OF those given above. - * - * DISCLAIMER - * - * This software is provided 'as is' with no explicit or implied warranties - * in respect of its properties, including, but not limited to, correctness - * and/or fitness for purpose. - * - * Copyright (c) 2003, Adam J. Richter (conversion to - * 2.5 API). - * Copyright (c) 2003, 2004 Fruhwirth Clemens - * Copyright (c) 2004 Red Hat, Inc., James Morris - * */ -#include #include -#include #include -#include -#include #include -#include asmlinkage void aes_enc_blk(struct crypto_tfm *tfm, u8 *dst, const u8 *src); asmlinkage void aes_dec_blk(struct crypto_tfm *tfm, u8 *dst, const u8 *src); -#define AES_KS_LENGTH 4 * AES_BLOCK_SIZE -#define RC_LENGTH 29 - -struct aes_ctx { - u32 ekey[AES_KS_LENGTH]; - u32 rounds; - u32 dkey[AES_KS_LENGTH]; -}; - -#define WPOLY 0x011b -#define bytes2word(b0, b1, b2, b3) \ - (((u32)(b3) << 24) | ((u32)(b2) << 16) | ((u32)(b1) << 8) | (b0)) - -/* define the finite field multiplies required for Rijndael */ -#define f2(x) ((x) ? pow[log[x] + 0x19] : 0) -#define f3(x) ((x) ? pow[log[x] + 0x01] : 0) -#define f9(x) ((x) ? pow[log[x] + 0xc7] : 0) -#define fb(x) ((x) ? pow[log[x] + 0x68] : 0) -#define fd(x) ((x) ? pow[log[x] + 0xee] : 0) -#define fe(x) ((x) ? pow[log[x] + 0xdf] : 0) -#define fi(x) ((x) ? pow[255 - log[x]]: 0) - -static inline u32 upr(u32 x, int n) -{ - return (x << 8 * n) | (x >> (32 - 8 * n)); -} - -static inline u8 bval(u32 x, int n) -{ - return x >> 8 * n; -} - -/* The forward and inverse affine transformations used in the S-box */ -#define fwd_affine(x) \ - (w = (u32)x, w ^= (w<<1)^(w<<2)^(w<<3)^(w<<4), 0x63^(u8)(w^(w>>8))) - -#define inv_affine(x) \ - (w = (u32)x, w = (w<<1)^(w<<3)^(w<<6), 0x05^(u8)(w^(w>>8))) - -static u32 rcon_tab[RC_LENGTH]; - -u32 ft_tab[4][256]; -u32 fl_tab[4][256]; -static u32 im_tab[4][256]; -u32 il_tab[4][256]; -u32 it_tab[4][256]; - -static void gen_tabs(void) -{ - u32 i, w; - u8 pow[512], log[256]; - - /* - * log and power tables for GF(2^8) finite field with - * WPOLY as modular polynomial - the simplest primitive - * root is 0x03, used here to generate the tables. - */ - i = 0; w = 1; - - do { - pow[i] = (u8)w; - pow[i + 255] = (u8)w; - log[w] = (u8)i++; - w ^= (w << 1) ^ (w & 0x80 ? WPOLY : 0); - } while (w != 1); - - for(i = 0, w = 1; i < RC_LENGTH; ++i) { - rcon_tab[i] = bytes2word(w, 0, 0, 0); - w = f2(w); - } - - for(i = 0; i < 256; ++i) { - u8 b; - - b = fwd_affine(fi((u8)i)); - w = bytes2word(f2(b), b, b, f3(b)); - - /* tables for a normal encryption round */ - ft_tab[0][i] = w; - ft_tab[1][i] = upr(w, 1); - ft_tab[2][i] = upr(w, 2); - ft_tab[3][i] = upr(w, 3); - w = bytes2word(b, 0, 0, 0); - - /* - * tables for last encryption round - * (may also be used in the key schedule) - */ - fl_tab[0][i] = w; - fl_tab[1][i] = upr(w, 1); - fl_tab[2][i] = upr(w, 2); - fl_tab[3][i] = upr(w, 3); - - b = fi(inv_affine((u8)i)); - w = bytes2word(fe(b), f9(b), fd(b), fb(b)); - - /* tables for the inverse mix column operation */ - im_tab[0][b] = w; - im_tab[1][b] = upr(w, 1); - im_tab[2][b] = upr(w, 2); - im_tab[3][b] = upr(w, 3); - - /* tables for a normal decryption round */ - it_tab[0][i] = w; - it_tab[1][i] = upr(w,1); - it_tab[2][i] = upr(w,2); - it_tab[3][i] = upr(w,3); - - w = bytes2word(b, 0, 0, 0); - - /* tables for last decryption round */ - il_tab[0][i] = w; - il_tab[1][i] = upr(w,1); - il_tab[2][i] = upr(w,2); - il_tab[3][i] = upr(w,3); - } -} - -#define four_tables(x,tab,vf,rf,c) \ -( tab[0][bval(vf(x,0,c),rf(0,c))] ^ \ - tab[1][bval(vf(x,1,c),rf(1,c))] ^ \ - tab[2][bval(vf(x,2,c),rf(2,c))] ^ \ - tab[3][bval(vf(x,3,c),rf(3,c))] \ -) - -#define vf1(x,r,c) (x) -#define rf1(r,c) (r) -#define rf2(r,c) ((r-c)&3) - -#define inv_mcol(x) four_tables(x,im_tab,vf1,rf1,0) -#define ls_box(x,c) four_tables(x,fl_tab,vf1,rf2,c) - -#define ff(x) inv_mcol(x) - -#define ke4(k,i) \ -{ \ - k[4*(i)+4] = ss[0] ^= ls_box(ss[3],3) ^ rcon_tab[i]; \ - k[4*(i)+5] = ss[1] ^= ss[0]; \ - k[4*(i)+6] = ss[2] ^= ss[1]; \ - k[4*(i)+7] = ss[3] ^= ss[2]; \ -} - -#define kel4(k,i) \ -{ \ - k[4*(i)+4] = ss[0] ^= ls_box(ss[3],3) ^ rcon_tab[i]; \ - k[4*(i)+5] = ss[1] ^= ss[0]; \ - k[4*(i)+6] = ss[2] ^= ss[1]; k[4*(i)+7] = ss[3] ^= ss[2]; \ -} - -#define ke6(k,i) \ -{ \ - k[6*(i)+ 6] = ss[0] ^= ls_box(ss[5],3) ^ rcon_tab[i]; \ - k[6*(i)+ 7] = ss[1] ^= ss[0]; \ - k[6*(i)+ 8] = ss[2] ^= ss[1]; \ - k[6*(i)+ 9] = ss[3] ^= ss[2]; \ - k[6*(i)+10] = ss[4] ^= ss[3]; \ - k[6*(i)+11] = ss[5] ^= ss[4]; \ -} - -#define kel6(k,i) \ -{ \ - k[6*(i)+ 6] = ss[0] ^= ls_box(ss[5],3) ^ rcon_tab[i]; \ - k[6*(i)+ 7] = ss[1] ^= ss[0]; \ - k[6*(i)+ 8] = ss[2] ^= ss[1]; \ - k[6*(i)+ 9] = ss[3] ^= ss[2]; \ -} - -#define ke8(k,i) \ -{ \ - k[8*(i)+ 8] = ss[0] ^= ls_box(ss[7],3) ^ rcon_tab[i]; \ - k[8*(i)+ 9] = ss[1] ^= ss[0]; \ - k[8*(i)+10] = ss[2] ^= ss[1]; \ - k[8*(i)+11] = ss[3] ^= ss[2]; \ - k[8*(i)+12] = ss[4] ^= ls_box(ss[3],0); \ - k[8*(i)+13] = ss[5] ^= ss[4]; \ - k[8*(i)+14] = ss[6] ^= ss[5]; \ - k[8*(i)+15] = ss[7] ^= ss[6]; \ -} - -#define kel8(k,i) \ -{ \ - k[8*(i)+ 8] = ss[0] ^= ls_box(ss[7],3) ^ rcon_tab[i]; \ - k[8*(i)+ 9] = ss[1] ^= ss[0]; \ - k[8*(i)+10] = ss[2] ^= ss[1]; \ - k[8*(i)+11] = ss[3] ^= ss[2]; \ -} - -#define kdf4(k,i) \ -{ \ - ss[0] = ss[0] ^ ss[2] ^ ss[1] ^ ss[3]; \ - ss[1] = ss[1] ^ ss[3]; \ - ss[2] = ss[2] ^ ss[3]; \ - ss[3] = ss[3]; \ - ss[4] = ls_box(ss[(i+3) % 4], 3) ^ rcon_tab[i]; \ - ss[i % 4] ^= ss[4]; \ - ss[4] ^= k[4*(i)]; \ - k[4*(i)+4] = ff(ss[4]); \ - ss[4] ^= k[4*(i)+1]; \ - k[4*(i)+5] = ff(ss[4]); \ - ss[4] ^= k[4*(i)+2]; \ - k[4*(i)+6] = ff(ss[4]); \ - ss[4] ^= k[4*(i)+3]; \ - k[4*(i)+7] = ff(ss[4]); \ -} - -#define kd4(k,i) \ -{ \ - ss[4] = ls_box(ss[(i+3) % 4], 3) ^ rcon_tab[i]; \ - ss[i % 4] ^= ss[4]; \ - ss[4] = ff(ss[4]); \ - k[4*(i)+4] = ss[4] ^= k[4*(i)]; \ - k[4*(i)+5] = ss[4] ^= k[4*(i)+1]; \ - k[4*(i)+6] = ss[4] ^= k[4*(i)+2]; \ - k[4*(i)+7] = ss[4] ^= k[4*(i)+3]; \ -} - -#define kdl4(k,i) \ -{ \ - ss[4] = ls_box(ss[(i+3) % 4], 3) ^ rcon_tab[i]; \ - ss[i % 4] ^= ss[4]; \ - k[4*(i)+4] = (ss[0] ^= ss[1]) ^ ss[2] ^ ss[3]; \ - k[4*(i)+5] = ss[1] ^ ss[3]; \ - k[4*(i)+6] = ss[0]; \ - k[4*(i)+7] = ss[1]; \ -} - -#define kdf6(k,i) \ -{ \ - ss[0] ^= ls_box(ss[5],3) ^ rcon_tab[i]; \ - k[6*(i)+ 6] = ff(ss[0]); \ - ss[1] ^= ss[0]; \ - k[6*(i)+ 7] = ff(ss[1]); \ - ss[2] ^= ss[1]; \ - k[6*(i)+ 8] = ff(ss[2]); \ - ss[3] ^= ss[2]; \ - k[6*(i)+ 9] = ff(ss[3]); \ - ss[4] ^= ss[3]; \ - k[6*(i)+10] = ff(ss[4]); \ - ss[5] ^= ss[4]; \ - k[6*(i)+11] = ff(ss[5]); \ -} - -#define kd6(k,i) \ -{ \ - ss[6] = ls_box(ss[5],3) ^ rcon_tab[i]; \ - ss[0] ^= ss[6]; ss[6] = ff(ss[6]); \ - k[6*(i)+ 6] = ss[6] ^= k[6*(i)]; \ - ss[1] ^= ss[0]; \ - k[6*(i)+ 7] = ss[6] ^= k[6*(i)+ 1]; \ - ss[2] ^= ss[1]; \ - k[6*(i)+ 8] = ss[6] ^= k[6*(i)+ 2]; \ - ss[3] ^= ss[2]; \ - k[6*(i)+ 9] = ss[6] ^= k[6*(i)+ 3]; \ - ss[4] ^= ss[3]; \ - k[6*(i)+10] = ss[6] ^= k[6*(i)+ 4]; \ - ss[5] ^= ss[4]; \ - k[6*(i)+11] = ss[6] ^= k[6*(i)+ 5]; \ -} - -#define kdl6(k,i) \ -{ \ - ss[0] ^= ls_box(ss[5],3) ^ rcon_tab[i]; \ - k[6*(i)+ 6] = ss[0]; \ - ss[1] ^= ss[0]; \ - k[6*(i)+ 7] = ss[1]; \ - ss[2] ^= ss[1]; \ - k[6*(i)+ 8] = ss[2]; \ - ss[3] ^= ss[2]; \ - k[6*(i)+ 9] = ss[3]; \ -} - -#define kdf8(k,i) \ -{ \ - ss[0] ^= ls_box(ss[7],3) ^ rcon_tab[i]; \ - k[8*(i)+ 8] = ff(ss[0]); \ - ss[1] ^= ss[0]; \ - k[8*(i)+ 9] = ff(ss[1]); \ - ss[2] ^= ss[1]; \ - k[8*(i)+10] = ff(ss[2]); \ - ss[3] ^= ss[2]; \ - k[8*(i)+11] = ff(ss[3]); \ - ss[4] ^= ls_box(ss[3],0); \ - k[8*(i)+12] = ff(ss[4]); \ - ss[5] ^= ss[4]; \ - k[8*(i)+13] = ff(ss[5]); \ - ss[6] ^= ss[5]; \ - k[8*(i)+14] = ff(ss[6]); \ - ss[7] ^= ss[6]; \ - k[8*(i)+15] = ff(ss[7]); \ -} - -#define kd8(k,i) \ -{ \ - u32 __g = ls_box(ss[7],3) ^ rcon_tab[i]; \ - ss[0] ^= __g; \ - __g = ff(__g); \ - k[8*(i)+ 8] = __g ^= k[8*(i)]; \ - ss[1] ^= ss[0]; \ - k[8*(i)+ 9] = __g ^= k[8*(i)+ 1]; \ - ss[2] ^= ss[1]; \ - k[8*(i)+10] = __g ^= k[8*(i)+ 2]; \ - ss[3] ^= ss[2]; \ - k[8*(i)+11] = __g ^= k[8*(i)+ 3]; \ - __g = ls_box(ss[3],0); \ - ss[4] ^= __g; \ - __g = ff(__g); \ - k[8*(i)+12] = __g ^= k[8*(i)+ 4]; \ - ss[5] ^= ss[4]; \ - k[8*(i)+13] = __g ^= k[8*(i)+ 5]; \ - ss[6] ^= ss[5]; \ - k[8*(i)+14] = __g ^= k[8*(i)+ 6]; \ - ss[7] ^= ss[6]; \ - k[8*(i)+15] = __g ^= k[8*(i)+ 7]; \ -} - -#define kdl8(k,i) \ -{ \ - ss[0] ^= ls_box(ss[7],3) ^ rcon_tab[i]; \ - k[8*(i)+ 8] = ss[0]; \ - ss[1] ^= ss[0]; \ - k[8*(i)+ 9] = ss[1]; \ - ss[2] ^= ss[1]; \ - k[8*(i)+10] = ss[2]; \ - ss[3] ^= ss[2]; \ - k[8*(i)+11] = ss[3]; \ -} - -static int aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, - unsigned int key_len) -{ - int i; - u32 ss[8]; - struct aes_ctx *ctx = crypto_tfm_ctx(tfm); - const __le32 *key = (const __le32 *)in_key; - u32 *flags = &tfm->crt_flags; - - /* encryption schedule */ - - ctx->ekey[0] = ss[0] = le32_to_cpu(key[0]); - ctx->ekey[1] = ss[1] = le32_to_cpu(key[1]); - ctx->ekey[2] = ss[2] = le32_to_cpu(key[2]); - ctx->ekey[3] = ss[3] = le32_to_cpu(key[3]); - - switch(key_len) { - case 16: - for (i = 0; i < 9; i++) - ke4(ctx->ekey, i); - kel4(ctx->ekey, 9); - ctx->rounds = 10; - break; - - case 24: - ctx->ekey[4] = ss[4] = le32_to_cpu(key[4]); - ctx->ekey[5] = ss[5] = le32_to_cpu(key[5]); - for (i = 0; i < 7; i++) - ke6(ctx->ekey, i); - kel6(ctx->ekey, 7); - ctx->rounds = 12; - break; - - case 32: - ctx->ekey[4] = ss[4] = le32_to_cpu(key[4]); - ctx->ekey[5] = ss[5] = le32_to_cpu(key[5]); - ctx->ekey[6] = ss[6] = le32_to_cpu(key[6]); - ctx->ekey[7] = ss[7] = le32_to_cpu(key[7]); - for (i = 0; i < 6; i++) - ke8(ctx->ekey, i); - kel8(ctx->ekey, 6); - ctx->rounds = 14; - break; - - default: - *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; - return -EINVAL; - } - - /* decryption schedule */ - - ctx->dkey[0] = ss[0] = le32_to_cpu(key[0]); - ctx->dkey[1] = ss[1] = le32_to_cpu(key[1]); - ctx->dkey[2] = ss[2] = le32_to_cpu(key[2]); - ctx->dkey[3] = ss[3] = le32_to_cpu(key[3]); - - switch (key_len) { - case 16: - kdf4(ctx->dkey, 0); - for (i = 1; i < 9; i++) - kd4(ctx->dkey, i); - kdl4(ctx->dkey, 9); - break; - - case 24: - ctx->dkey[4] = ff(ss[4] = le32_to_cpu(key[4])); - ctx->dkey[5] = ff(ss[5] = le32_to_cpu(key[5])); - kdf6(ctx->dkey, 0); - for (i = 1; i < 7; i++) - kd6(ctx->dkey, i); - kdl6(ctx->dkey, 7); - break; - - case 32: - ctx->dkey[4] = ff(ss[4] = le32_to_cpu(key[4])); - ctx->dkey[5] = ff(ss[5] = le32_to_cpu(key[5])); - ctx->dkey[6] = ff(ss[6] = le32_to_cpu(key[6])); - ctx->dkey[7] = ff(ss[7] = le32_to_cpu(key[7])); - kdf8(ctx->dkey, 0); - for (i = 1; i < 6; i++) - kd8(ctx->dkey, i); - kdl8(ctx->dkey, 6); - break; - } - return 0; -} - static void aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) { aes_enc_blk(tfm, dst, src); @@ -479,14 +25,14 @@ static struct crypto_alg aes_alg = { .cra_priority = 200, .cra_flags = CRYPTO_ALG_TYPE_CIPHER, .cra_blocksize = AES_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct aes_ctx), + .cra_ctxsize = sizeof(struct crypto_aes_ctx), .cra_module = THIS_MODULE, .cra_list = LIST_HEAD_INIT(aes_alg.cra_list), .cra_u = { .cipher = { .cia_min_keysize = AES_MIN_KEY_SIZE, .cia_max_keysize = AES_MAX_KEY_SIZE, - .cia_setkey = aes_set_key, + .cia_setkey = crypto_aes_set_key, .cia_encrypt = aes_encrypt, .cia_decrypt = aes_decrypt } @@ -495,7 +41,6 @@ static struct crypto_alg aes_alg = { static int __init aes_init(void) { - gen_tabs(); return crypto_register_alg(&aes_alg); } diff --git a/crypto/Kconfig b/crypto/Kconfig index d9666e33a9f1..cf115b14079e 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -328,6 +328,7 @@ config CRYPTO_AES_586 tristate "AES cipher algorithms (i586)" depends on (X86 || UML_X86) && !64BIT select CRYPTO_ALGAPI + select CRYPTO_AES help AES cipher algorithms (FIPS-197). AES uses the Rijndael algorithm. -- cgit v1.2.3-59-g8ed1b From cd7c3bfe54270f41ac52be6b725a7194d99175b4 Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Sat, 10 Nov 2007 19:29:33 +0800 Subject: [CRYPTO] geode: Add fallback for unsupported modes The Geode AES crypto engine supports only 128 bit long key. This patch adds fallback for other key sizes which are required by the AES standard. Signed-off-by: Sebastian Siewior Acked-by: Jordan Crouse Signed-off-by: Herbert Xu --- drivers/crypto/geode-aes.c | 243 +++++++++++++++++++++++++++++++++++++-------- drivers/crypto/geode-aes.h | 6 ++ 2 files changed, 206 insertions(+), 43 deletions(-) diff --git a/drivers/crypto/geode-aes.c b/drivers/crypto/geode-aes.c index 181d42c2deed..0ca92d414667 100644 --- a/drivers/crypto/geode-aes.c +++ b/drivers/crypto/geode-aes.c @@ -113,18 +113,103 @@ geode_aes_crypt(struct geode_aes_op *op) /* CRYPTO-API Functions */ -static int -geode_setkey(struct crypto_tfm *tfm, const u8 *key, unsigned int len) +static int geode_setkey_cip(struct crypto_tfm *tfm, const u8 *key, + unsigned int len) { struct geode_aes_op *op = crypto_tfm_ctx(tfm); + unsigned int ret; + + op->keylen = len; + + if (len == AES_KEYSIZE_128) { + memcpy(op->key, key, len); + return 0; + } - if (len != AES_KEY_LENGTH) { + if (len != AES_KEYSIZE_192 && len != AES_KEYSIZE_256) { + /* not supported at all */ tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; return -EINVAL; } - memcpy(op->key, key, len); - return 0; + /* + * The requested key size is not supported by HW, do a fallback + */ + op->fallback.blk->base.crt_flags &= ~CRYPTO_TFM_REQ_MASK; + op->fallback.blk->base.crt_flags |= (tfm->crt_flags & CRYPTO_TFM_REQ_MASK); + + ret = crypto_cipher_setkey(op->fallback.cip, key, len); + if (ret) { + tfm->crt_flags &= ~CRYPTO_TFM_RES_MASK; + tfm->crt_flags |= (op->fallback.blk->base.crt_flags & CRYPTO_TFM_RES_MASK); + } + return ret; +} + +static int geode_setkey_blk(struct crypto_tfm *tfm, const u8 *key, + unsigned int len) +{ + struct geode_aes_op *op = crypto_tfm_ctx(tfm); + unsigned int ret; + + op->keylen = len; + + if (len == AES_KEYSIZE_128) { + memcpy(op->key, key, len); + return 0; + } + + if (len != AES_KEYSIZE_192 && len != AES_KEYSIZE_256) { + /* not supported at all */ + tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + return -EINVAL; + } + + /* + * The requested key size is not supported by HW, do a fallback + */ + op->fallback.blk->base.crt_flags &= ~CRYPTO_TFM_REQ_MASK; + op->fallback.blk->base.crt_flags |= (tfm->crt_flags & CRYPTO_TFM_REQ_MASK); + + ret = crypto_blkcipher_setkey(op->fallback.blk, key, len); + if (ret) { + tfm->crt_flags &= ~CRYPTO_TFM_RES_MASK; + tfm->crt_flags |= (op->fallback.blk->base.crt_flags & CRYPTO_TFM_RES_MASK); + } + return ret; +} + +static int fallback_blk_dec(struct blkcipher_desc *desc, + struct scatterlist *dst, struct scatterlist *src, + unsigned int nbytes) +{ + unsigned int ret; + struct crypto_blkcipher *tfm; + struct geode_aes_op *op = crypto_blkcipher_ctx(desc->tfm); + + tfm = desc->tfm; + desc->tfm = op->fallback.blk; + + ret = crypto_blkcipher_decrypt(desc, dst, src, nbytes); + + desc->tfm = tfm; + return ret; +} +static int fallback_blk_enc(struct blkcipher_desc *desc, + struct scatterlist *dst, struct scatterlist *src, + unsigned int nbytes) +{ + unsigned int ret; + struct crypto_blkcipher *tfm; + struct geode_aes_op *op = crypto_blkcipher_ctx(desc->tfm); + + tfm = desc->tfm; + desc->tfm = op->fallback.blk; + + ret = crypto_blkcipher_encrypt(desc, dst, src, nbytes); + + desc->tfm = tfm; + return ret; } static void @@ -132,8 +217,10 @@ geode_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) { struct geode_aes_op *op = crypto_tfm_ctx(tfm); - if ((out == NULL) || (in == NULL)) + if (unlikely(op->keylen != AES_KEYSIZE_128)) { + crypto_cipher_encrypt_one(op->fallback.cip, out, in); return; + } op->src = (void *) in; op->dst = (void *) out; @@ -151,8 +238,10 @@ geode_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) { struct geode_aes_op *op = crypto_tfm_ctx(tfm); - if ((out == NULL) || (in == NULL)) + if (unlikely(op->keylen != AES_KEYSIZE_128)) { + crypto_cipher_decrypt_one(op->fallback.cip, out, in); return; + } op->src = (void *) in; op->dst = (void *) out; @@ -164,24 +253,50 @@ geode_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) geode_aes_crypt(op); } +static int fallback_init_cip(struct crypto_tfm *tfm) +{ + const char *name = tfm->__crt_alg->cra_name; + struct geode_aes_op *op = crypto_tfm_ctx(tfm); + + op->fallback.cip = crypto_alloc_cipher(name, 0, + CRYPTO_ALG_ASYNC | CRYPTO_ALG_NEED_FALLBACK); + + if (IS_ERR(op->fallback.cip)) { + printk(KERN_ERR "Error allocating fallback algo %s\n", name); + return PTR_ERR(op->fallback.blk); + } + + return 0; +} + +static void fallback_exit_cip(struct crypto_tfm *tfm) +{ + struct geode_aes_op *op = crypto_tfm_ctx(tfm); + + crypto_free_cipher(op->fallback.cip); + op->fallback.cip = NULL; +} static struct crypto_alg geode_alg = { - .cra_name = "aes", - .cra_driver_name = "geode-aes-128", - .cra_priority = 300, - .cra_alignmask = 15, - .cra_flags = CRYPTO_ALG_TYPE_CIPHER, + .cra_name = "aes", + .cra_driver_name = "geode-aes", + .cra_priority = 300, + .cra_alignmask = 15, + .cra_flags = CRYPTO_ALG_TYPE_CIPHER | + CRYPTO_ALG_NEED_FALLBACK, + .cra_init = fallback_init_cip, + .cra_exit = fallback_exit_cip, .cra_blocksize = AES_MIN_BLOCK_SIZE, .cra_ctxsize = sizeof(struct geode_aes_op), - .cra_module = THIS_MODULE, - .cra_list = LIST_HEAD_INIT(geode_alg.cra_list), - .cra_u = { - .cipher = { - .cia_min_keysize = AES_KEY_LENGTH, - .cia_max_keysize = AES_KEY_LENGTH, - .cia_setkey = geode_setkey, - .cia_encrypt = geode_encrypt, - .cia_decrypt = geode_decrypt + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(geode_alg.cra_list), + .cra_u = { + .cipher = { + .cia_min_keysize = AES_MIN_KEY_SIZE, + .cia_max_keysize = AES_MAX_KEY_SIZE, + .cia_setkey = geode_setkey_cip, + .cia_encrypt = geode_encrypt, + .cia_decrypt = geode_decrypt } } }; @@ -195,6 +310,9 @@ geode_cbc_decrypt(struct blkcipher_desc *desc, struct blkcipher_walk walk; int err, ret; + if (unlikely(op->keylen != AES_KEYSIZE_128)) + return fallback_blk_dec(desc, dst, src, nbytes); + blkcipher_walk_init(&walk, dst, src, nbytes); err = blkcipher_walk_virt(desc, &walk); memcpy(op->iv, walk.iv, AES_IV_LENGTH); @@ -225,6 +343,9 @@ geode_cbc_encrypt(struct blkcipher_desc *desc, struct blkcipher_walk walk; int err, ret; + if (unlikely(op->keylen != AES_KEYSIZE_128)) + return fallback_blk_enc(desc, dst, src, nbytes); + blkcipher_walk_init(&walk, dst, src, nbytes); err = blkcipher_walk_virt(desc, &walk); memcpy(op->iv, walk.iv, AES_IV_LENGTH); @@ -245,22 +366,49 @@ geode_cbc_encrypt(struct blkcipher_desc *desc, return err; } +static int fallback_init_blk(struct crypto_tfm *tfm) +{ + const char *name = tfm->__crt_alg->cra_name; + struct geode_aes_op *op = crypto_tfm_ctx(tfm); + + op->fallback.blk = crypto_alloc_blkcipher(name, 0, + CRYPTO_ALG_ASYNC | CRYPTO_ALG_NEED_FALLBACK); + + if (IS_ERR(op->fallback.blk)) { + printk(KERN_ERR "Error allocating fallback algo %s\n", name); + return PTR_ERR(op->fallback.blk); + } + + return 0; +} + +static void fallback_exit_blk(struct crypto_tfm *tfm) +{ + struct geode_aes_op *op = crypto_tfm_ctx(tfm); + + crypto_free_blkcipher(op->fallback.blk); + op->fallback.blk = NULL; +} + static struct crypto_alg geode_cbc_alg = { .cra_name = "cbc(aes)", - .cra_driver_name = "cbc-aes-geode-128", + .cra_driver_name = "cbc-aes-geode", .cra_priority = 400, - .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | + CRYPTO_ALG_NEED_FALLBACK, + .cra_init = fallback_init_blk, + .cra_exit = fallback_exit_blk, .cra_blocksize = AES_MIN_BLOCK_SIZE, .cra_ctxsize = sizeof(struct geode_aes_op), .cra_alignmask = 15, - .cra_type = &crypto_blkcipher_type, - .cra_module = THIS_MODULE, - .cra_list = LIST_HEAD_INIT(geode_cbc_alg.cra_list), - .cra_u = { - .blkcipher = { - .min_keysize = AES_KEY_LENGTH, - .max_keysize = AES_KEY_LENGTH, - .setkey = geode_setkey, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(geode_cbc_alg.cra_list), + .cra_u = { + .blkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .setkey = geode_setkey_blk, .encrypt = geode_cbc_encrypt, .decrypt = geode_cbc_decrypt, .ivsize = AES_IV_LENGTH, @@ -277,6 +425,9 @@ geode_ecb_decrypt(struct blkcipher_desc *desc, struct blkcipher_walk walk; int err, ret; + if (unlikely(op->keylen != AES_KEYSIZE_128)) + return fallback_blk_dec(desc, dst, src, nbytes); + blkcipher_walk_init(&walk, dst, src, nbytes); err = blkcipher_walk_virt(desc, &walk); @@ -304,6 +455,9 @@ geode_ecb_encrypt(struct blkcipher_desc *desc, struct blkcipher_walk walk; int err, ret; + if (unlikely(op->keylen != AES_KEYSIZE_128)) + return fallback_blk_enc(desc, dst, src, nbytes); + blkcipher_walk_init(&walk, dst, src, nbytes); err = blkcipher_walk_virt(desc, &walk); @@ -323,21 +477,24 @@ geode_ecb_encrypt(struct blkcipher_desc *desc, } static struct crypto_alg geode_ecb_alg = { - .cra_name = "ecb(aes)", - .cra_driver_name = "ecb-aes-geode-128", + .cra_name = "ecb(aes)", + .cra_driver_name = "ecb-aes-geode", .cra_priority = 400, - .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | + CRYPTO_ALG_NEED_FALLBACK, + .cra_init = fallback_init_blk, + .cra_exit = fallback_exit_blk, .cra_blocksize = AES_MIN_BLOCK_SIZE, .cra_ctxsize = sizeof(struct geode_aes_op), .cra_alignmask = 15, - .cra_type = &crypto_blkcipher_type, - .cra_module = THIS_MODULE, - .cra_list = LIST_HEAD_INIT(geode_ecb_alg.cra_list), - .cra_u = { - .blkcipher = { - .min_keysize = AES_KEY_LENGTH, - .max_keysize = AES_KEY_LENGTH, - .setkey = geode_setkey, + .cra_type = &crypto_blkcipher_type, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(geode_ecb_alg.cra_list), + .cra_u = { + .blkcipher = { + .min_keysize = AES_MIN_KEY_SIZE, + .max_keysize = AES_MAX_KEY_SIZE, + .setkey = geode_setkey_blk, .encrypt = geode_ecb_encrypt, .decrypt = geode_ecb_decrypt, } @@ -367,7 +524,7 @@ geode_aes_probe(struct pci_dev *dev, const struct pci_device_id *id) if ((ret = pci_enable_device(dev))) return ret; - if ((ret = pci_request_regions(dev, "geode-aes-128"))) + if ((ret = pci_request_regions(dev, "geode-aes"))) goto eenable; _iobase = pci_iomap(dev, 0, 0); diff --git a/drivers/crypto/geode-aes.h b/drivers/crypto/geode-aes.h index 2f1d55982aac..14cc763da1e4 100644 --- a/drivers/crypto/geode-aes.h +++ b/drivers/crypto/geode-aes.h @@ -66,6 +66,12 @@ struct geode_aes_op { u8 key[AES_KEY_LENGTH]; u8 iv[AES_IV_LENGTH]; + + union { + struct crypto_blkcipher *blk; + struct crypto_cipher *cip; + } fallback; + u32 keylen; }; #endif -- cgit v1.2.3-59-g8ed1b From cd12fb906d2591e80da9edcbd4794b9b916d7489 Mon Sep 17 00:00:00 2001 From: Jonathan Lynch Date: Sat, 10 Nov 2007 20:08:25 +0800 Subject: [CRYPTO] sha256-generic: Extend sha256_generic.c to support SHA-224 Resubmitting this patch which extends sha256_generic.c to support SHA-224 as described in FIPS 180-2 and RFC 3874. HMAC-SHA-224 as described in RFC4231 is then supported through the hmac interface. Patch includes test vectors for SHA-224 and HMAC-SHA-224. SHA-224 chould be chosen as a hash algorithm when 112 bits of security strength is required. Patch generated against the 2.6.24-rc1 kernel and tested against 2.6.24-rc1-git14 which includes fix for scatter gather implementation for HMAC. Signed-off-by: Jonathan Lynch Signed-off-by: Herbert Xu --- crypto/Kconfig | 5 +- crypto/sha256_generic.c | 72 +++++++++++++++++++++--- crypto/tcrypt.c | 22 +++++++- crypto/tcrypt.h | 142 ++++++++++++++++++++++++++++++++++++++++++++++++ include/crypto/sha.h | 12 ++++ 5 files changed, 241 insertions(+), 12 deletions(-) diff --git a/crypto/Kconfig b/crypto/Kconfig index cf115b14079e..7758454b9f17 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -91,7 +91,7 @@ config CRYPTO_SHA1 SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2). config CRYPTO_SHA256 - tristate "SHA256 digest algorithm" + tristate "SHA224 and SHA256 digest algorithm" select CRYPTO_ALGAPI help SHA256 secure hash standard (DFIPS 180-2). @@ -99,6 +99,9 @@ config CRYPTO_SHA256 This version of SHA implements a 256 bit hash with 128 bits of security against collision attacks. + This code also includes SHA-224, a 224 bit hash with 112 bits + of security against collision attacks. + config CRYPTO_SHA512 tristate "SHA384 and SHA512 digest algorithms" select CRYPTO_ALGAPI diff --git a/crypto/sha256_generic.c b/crypto/sha256_generic.c index fd3918be58b5..3cc93fd61043 100644 --- a/crypto/sha256_generic.c +++ b/crypto/sha256_generic.c @@ -9,6 +9,7 @@ * Copyright (c) Jean-Luc Cooke * Copyright (c) Andrew McDonald * Copyright (c) 2002 James Morris + * SHA224 Support Copyright 2007 Intel Corporation * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free @@ -218,6 +219,22 @@ static void sha256_transform(u32 *state, const u8 *input) memset(W, 0, 64 * sizeof(u32)); } + +static void sha224_init(struct crypto_tfm *tfm) +{ + struct sha256_ctx *sctx = crypto_tfm_ctx(tfm); + sctx->state[0] = SHA224_H0; + sctx->state[1] = SHA224_H1; + sctx->state[2] = SHA224_H2; + sctx->state[3] = SHA224_H3; + sctx->state[4] = SHA224_H4; + sctx->state[5] = SHA224_H5; + sctx->state[6] = SHA224_H6; + sctx->state[7] = SHA224_H7; + sctx->count[0] = 0; + sctx->count[1] = 0; +} + static void sha256_init(struct crypto_tfm *tfm) { struct sha256_ctx *sctx = crypto_tfm_ctx(tfm); @@ -294,8 +311,17 @@ static void sha256_final(struct crypto_tfm *tfm, u8 *out) memset(sctx, 0, sizeof(*sctx)); } +static void sha224_final(struct crypto_tfm *tfm, u8 *hash) +{ + u8 D[SHA256_DIGEST_SIZE]; + + sha256_final(tfm, D); + + memcpy(hash, D, SHA224_DIGEST_SIZE); + memset(D, 0, SHA256_DIGEST_SIZE); +} -static struct crypto_alg alg = { +static struct crypto_alg sha256 = { .cra_name = "sha256", .cra_driver_name= "sha256-generic", .cra_flags = CRYPTO_ALG_TYPE_DIGEST, @@ -303,28 +329,58 @@ static struct crypto_alg alg = { .cra_ctxsize = sizeof(struct sha256_ctx), .cra_module = THIS_MODULE, .cra_alignmask = 3, - .cra_list = LIST_HEAD_INIT(alg.cra_list), + .cra_list = LIST_HEAD_INIT(sha256.cra_list), .cra_u = { .digest = { .dia_digestsize = SHA256_DIGEST_SIZE, - .dia_init = sha256_init, - .dia_update = sha256_update, - .dia_final = sha256_final } } + .dia_init = sha256_init, + .dia_update = sha256_update, + .dia_final = sha256_final } } +}; + +static struct crypto_alg sha224 = { + .cra_name = "sha224", + .cra_driver_name = "sha224-generic", + .cra_flags = CRYPTO_ALG_TYPE_DIGEST, + .cra_blocksize = SHA224_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct sha256_ctx), + .cra_module = THIS_MODULE, + .cra_alignmask = 3, + .cra_list = LIST_HEAD_INIT(sha224.cra_list), + .cra_u = { .digest = { + .dia_digestsize = SHA224_DIGEST_SIZE, + .dia_init = sha224_init, + .dia_update = sha256_update, + .dia_final = sha224_final } } }; static int __init init(void) { - return crypto_register_alg(&alg); + int ret = 0; + + ret = crypto_register_alg(&sha224); + + if (ret < 0) + return ret; + + ret = crypto_register_alg(&sha256); + + if (ret < 0) + crypto_unregister_alg(&sha224); + + return ret; } static void __exit fini(void) { - crypto_unregister_alg(&alg); + crypto_unregister_alg(&sha224); + crypto_unregister_alg(&sha256); } module_init(init); module_exit(fini); MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("SHA256 Secure Hash Algorithm"); +MODULE_DESCRIPTION("SHA-224 and SHA-256 Secure Hash Algorithm"); +MODULE_ALIAS("sha224"); MODULE_ALIAS("sha256"); diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c index aa84bc4f2313..4d364ccacbb2 100644 --- a/crypto/tcrypt.c +++ b/crypto/tcrypt.c @@ -12,6 +12,7 @@ * Software Foundation; either version 2 of the License, or (at your option) * any later version. * + * 2007-11-06 Added SHA-224 and SHA-224-HMAC tests * 2006-12-07 Added SHA384 HMAC and SHA512 HMAC tests * 2004-08-09 Added cipher speed tests (Reyk Floeter ) * 2003-09-14 Rewritten by Kartikey Mahendra Bhatt @@ -74,8 +75,9 @@ static char *xbuf; static char *tvmem; static char *check[] = { - "des", "md5", "des3_ede", "rot13", "sha1", "sha256", "blowfish", - "twofish", "serpent", "sha384", "sha512", "md4", "aes", "cast6", + "des", "md5", "des3_ede", "rot13", "sha1", "sha224", "sha256", + "blowfish", "twofish", "serpent", "sha384", "sha512", "md4", "aes", + "cast6", "arc4", "michael_mic", "deflate", "crc32c", "tea", "xtea", "arc4", "michael_mic", "deflate", "crc32c", "tea", "xtea", "khazad", "wp512", "wp384", "wp256", "tnepres", "xeta", "fcrypt", "camellia", "seed", NULL @@ -918,6 +920,8 @@ static void do_test(void) test_hash("md4", md4_tv_template, MD4_TEST_VECTORS); + test_hash("sha224", sha224_tv_template, SHA224_TEST_VECTORS); + test_hash("sha256", sha256_tv_template, SHA256_TEST_VECTORS); //BLOWFISH @@ -1067,6 +1071,8 @@ static void do_test(void) HMAC_MD5_TEST_VECTORS); test_hash("hmac(sha1)", hmac_sha1_tv_template, HMAC_SHA1_TEST_VECTORS); + test_hash("hmac(sha224)", hmac_sha224_tv_template, + HMAC_SHA224_TEST_VECTORS); test_hash("hmac(sha256)", hmac_sha256_tv_template, HMAC_SHA256_TEST_VECTORS); test_hash("hmac(sha384)", hmac_sha384_tv_template, @@ -1299,6 +1305,9 @@ static void do_test(void) camellia_cbc_dec_tv_template, CAMELLIA_CBC_DEC_TEST_VECTORS); break; + case 33: + test_hash("sha224", sha224_tv_template, SHA224_TEST_VECTORS); + break; case 100: test_hash("hmac(md5)", hmac_md5_tv_template, @@ -1324,7 +1333,10 @@ static void do_test(void) test_hash("hmac(sha512)", hmac_sha512_tv_template, HMAC_SHA512_TEST_VECTORS); break; - + case 105: + test_hash("hmac(sha224)", hmac_sha224_tv_template, + HMAC_SHA224_TEST_VECTORS); + break; case 200: test_cipher_speed("ecb(aes)", ENCRYPT, sec, NULL, 0, @@ -1459,6 +1471,10 @@ static void do_test(void) test_hash_speed("tgr192", sec, generic_hash_speed_template); if (mode > 300 && mode < 400) break; + case 313: + test_hash_speed("sha224", sec, generic_hash_speed_template); + if (mode > 300 && mode < 400) break; + case 399: break; diff --git a/crypto/tcrypt.h b/crypto/tcrypt.h index f7f9b2379270..b91585ea1362 100644 --- a/crypto/tcrypt.h +++ b/crypto/tcrypt.h @@ -173,6 +173,33 @@ static struct hash_testvec sha1_tv_template[] = { } }; + +/* + * SHA224 test vectors from from FIPS PUB 180-2 + */ +#define SHA224_TEST_VECTORS 2 + +static struct hash_testvec sha224_tv_template[] = { + { + .plaintext = "abc", + .psize = 3, + .digest = { 0x23, 0x09, 0x7D, 0x22, 0x34, 0x05, 0xD8, 0x22, + 0x86, 0x42, 0xA4, 0x77, 0xBD, 0xA2, 0x55, 0xB3, + 0x2A, 0xAD, 0xBC, 0xE4, 0xBD, 0xA0, 0xB3, 0xF7, + 0xE3, 0x6C, 0x9D, 0xA7}, + }, { + .plaintext = + "abcdbcdecdefdefgefghfghighijhijkijkljklmklmnlmnomnopnopq", + .psize = 56, + .digest = { 0x75, 0x38, 0x8B, 0x16, 0x51, 0x27, 0x76, 0xCC, + 0x5D, 0xBA, 0x5D, 0xA1, 0xFD, 0x89, 0x01, 0x50, + 0xB0, 0xC6, 0x45, 0x5C, 0xB4, 0xF5, 0x8B, 0x19, + 0x52, 0x52, 0x25, 0x25 }, + .np = 2, + .tap = { 28, 28 } + } +}; + /* * SHA256 test vectors from from NIST */ @@ -817,6 +844,121 @@ static struct hash_testvec hmac_sha1_tv_template[] = { }, }; + +/* + * SHA224 HMAC test vectors from RFC4231 + */ +#define HMAC_SHA224_TEST_VECTORS 4 + +static struct hash_testvec hmac_sha224_tv_template[] = { + { + .key = { 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, + 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, + 0x0b, 0x0b, 0x0b, 0x0b }, + .ksize = 20, + /* ("Hi There") */ + .plaintext = { 0x48, 0x69, 0x20, 0x54, 0x68, 0x65, 0x72, 0x65 }, + .psize = 8, + .digest = { 0x89, 0x6f, 0xb1, 0x12, 0x8a, 0xbb, 0xdf, 0x19, + 0x68, 0x32, 0x10, 0x7c, 0xd4, 0x9d, 0xf3, 0x3f, + 0x47, 0xb4, 0xb1, 0x16, 0x99, 0x12, 0xba, 0x4f, + 0x53, 0x68, 0x4b, 0x22}, + }, { + .key = { 0x4a, 0x65, 0x66, 0x65 }, /* ("Jefe") */ + .ksize = 4, + /* ("what do ya want for nothing?") */ + .plaintext = { 0x77, 0x68, 0x61, 0x74, 0x20, 0x64, 0x6f, 0x20, + 0x79, 0x61, 0x20, 0x77, 0x61, 0x6e, 0x74, 0x20, + 0x66, 0x6f, 0x72, 0x20, 0x6e, 0x6f, 0x74, 0x68, + 0x69, 0x6e, 0x67, 0x3f }, + .psize = 28, + .digest = { 0xa3, 0x0e, 0x01, 0x09, 0x8b, 0xc6, 0xdb, 0xbf, + 0x45, 0x69, 0x0f, 0x3a, 0x7e, 0x9e, 0x6d, 0x0f, + 0x8b, 0xbe, 0xa2, 0xa3, 0x9e, 0x61, 0x48, 0x00, + 0x8f, 0xd0, 0x5e, 0x44 }, + .np = 4, + .tap = { 7, 7, 7, 7 } + }, { + .key = { 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa }, + .ksize = 131, + /* ("Test Using Larger Than Block-Size Key - Hash Key First") */ + .plaintext = { 0x54, 0x65, 0x73, 0x74, 0x20, 0x55, 0x73, 0x69, + 0x6e, 0x67, 0x20, 0x4c, 0x61, 0x72, 0x67, 0x65, + 0x72, 0x20, 0x54, 0x68, 0x61, 0x6e, 0x20, 0x42, + 0x6c, 0x6f, 0x63, 0x6b, 0x2d, 0x53, 0x69, 0x7a, + 0x65, 0x20, 0x4b, 0x65, 0x79, 0x20, 0x2d, 0x20, + 0x48, 0x61, 0x73, 0x68, 0x20, 0x4b, 0x65, 0x79, + 0x20, 0x46, 0x69, 0x72, 0x73, 0x74 }, + .psize = 54, + .digest = { 0x95, 0xe9, 0xa0, 0xdb, 0x96, 0x20, 0x95, 0xad, + 0xae, 0xbe, 0x9b, 0x2d, 0x6f, 0x0d, 0xbc, 0xe2, + 0xd4, 0x99, 0xf1, 0x12, 0xf2, 0xd2, 0xb7, 0x27, + 0x3f, 0xa6, 0x87, 0x0e }, + }, { + .key = { 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + 0xaa, 0xaa, 0xaa }, + .ksize = 131, + /* ("This is a test using a larger than block-size key and a") + (" larger than block-size data. The key needs to be") + (" hashed before being used by the HMAC algorithm.") */ + .plaintext = { 0x54, 0x68, 0x69, 0x73, 0x20, 0x69, 0x73, 0x20, + 0x61, 0x20, 0x74, 0x65, 0x73, 0x74, 0x20, 0x75, + 0x73, 0x69, 0x6e, 0x67, 0x20, 0x61, 0x20, 0x6c, + 0x61, 0x72, 0x67, 0x65, 0x72, 0x20, 0x74, 0x68, + 0x61, 0x6e, 0x20, 0x62, 0x6c, 0x6f, 0x63, 0x6b, + 0x2d, 0x73, 0x69, 0x7a, 0x65, 0x20, 0x6b, 0x65, + 0x79, 0x20, 0x61, 0x6e, 0x64, 0x20, 0x61, 0x20, + 0x6c, 0x61, 0x72, 0x67, 0x65, 0x72, 0x20, 0x74, + 0x68, 0x61, 0x6e, 0x20, 0x62, 0x6c, 0x6f, 0x63, + 0x6b, 0x2d, 0x73, 0x69, 0x7a, 0x65, 0x20, 0x64, + 0x61, 0x74, 0x61, 0x2e, 0x20, 0x54, 0x68, 0x65, + 0x20, 0x6b, 0x65, 0x79, 0x20, 0x6e, 0x65, 0x65, + 0x64, 0x73, 0x20, 0x74, 0x6f, 0x20, 0x62, 0x65, + 0x20, 0x68, 0x61, 0x73, 0x68, 0x65, 0x64, 0x20, + 0x62, 0x65, 0x66, 0x6f, 0x72, 0x65, 0x20, 0x62, + 0x65, 0x69, 0x6e, 0x67, 0x20, 0x75, 0x73, 0x65, + 0x64, 0x20, 0x62, 0x79, 0x20, 0x74, 0x68, 0x65, + 0x20, 0x48, 0x4d, 0x41, 0x43, 0x20, 0x61, 0x6c, + 0x67, 0x6f, 0x72, 0x69, 0x74, 0x68, 0x6d, 0x2e }, + .psize = 152, + .digest = { 0x3a, 0x85, 0x41, 0x66, 0xac, 0x5d, 0x9f, 0x02, + 0x3f, 0x54, 0xd5, 0x17, 0xd0, 0xb3, 0x9d, 0xbd, + 0x94, 0x67, 0x70, 0xdb, 0x9c, 0x2b, 0x95, 0xc9, + 0xf6, 0xf5, 0x65, 0xd1 }, + }, +}; + /* * HMAC-SHA256 test vectors from * draft-ietf-ipsec-ciph-sha-256-01.txt diff --git a/include/crypto/sha.h b/include/crypto/sha.h index 0686e1f7a24b..c0ccc2b1a2d8 100644 --- a/include/crypto/sha.h +++ b/include/crypto/sha.h @@ -8,6 +8,9 @@ #define SHA1_DIGEST_SIZE 20 #define SHA1_BLOCK_SIZE 64 +#define SHA224_DIGEST_SIZE 28 +#define SHA224_BLOCK_SIZE 64 + #define SHA256_DIGEST_SIZE 32 #define SHA256_BLOCK_SIZE 64 @@ -23,6 +26,15 @@ #define SHA1_H3 0x10325476UL #define SHA1_H4 0xc3d2e1f0UL +#define SHA224_H0 0xc1059ed8UL +#define SHA224_H1 0x367cd507UL +#define SHA224_H2 0x3070dd17UL +#define SHA224_H3 0xf70e5939UL +#define SHA224_H4 0xffc00b31UL +#define SHA224_H5 0x68581511UL +#define SHA224_H6 0x64f98fa7UL +#define SHA224_H7 0xbefa4fa4UL + #define SHA256_H0 0x6a09e667UL #define SHA256_H1 0xbb67ae85UL #define SHA256_H2 0x3c6ef372UL -- cgit v1.2.3-59-g8ed1b From a1e6ef2f1e01f2aa9ed930e1089fc85dc745bf7a Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Sat, 10 Nov 2007 20:24:18 +0800 Subject: [CRYPTO] hifn: Schedule callback invocation to tasklet. This patch forces HIFN driver to invoke crypto request callbacks from tasklet (softirq context) instead of hardirq context, since network stack expects it to be called from bottom halves. It is done by simply scheduling callback invocation via dedicated tasklet. Workqueue solution was dropped because of tooo slow rescheduling performance (7 times slower than tasklet, for mode details one can check this link: http://tservice.net.ru/~s0mbre/blog/devel/other/2007_11_09.html). Driver passed all AES and DES tests in tcryt.c module. Signed-off-by: Evgeniy Polyakov Signed-off-by: Herbert Xu --- drivers/crypto/hifn_795x.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c index 391c20a3dff8..7b7c85439c33 100644 --- a/drivers/crypto/hifn_795x.c +++ b/drivers/crypto/hifn_795x.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -426,6 +427,8 @@ struct hifn_device u8 snum; + struct tasklet_struct tasklet; + struct crypto_queue queue; struct list_head alg_list; }; @@ -1879,7 +1882,7 @@ static irqreturn_t hifn_interrupt(int irq, void *data) hifn_write_1(dev, HIFN_1_DMA_IER, dev->dmareg); } - hifn_check_for_completion(dev, 0); + tasklet_schedule(&dev->tasklet); hifn_clear_rings(dev); return IRQ_HANDLED; @@ -2408,6 +2411,19 @@ err_out_exit: return err; } +static void hifn_tasklet_callback(unsigned long data) +{ + struct hifn_device *dev = (struct hifn_device *)data; + + /* + * This is ok to call this without lock being held, + * althogh it modifies some parameters used in parallel, + * (like dev->success), but they are used in process + * context or update is atomic (like setting dev->sa[i] to NULL). + */ + hifn_check_for_completion(dev, 0); +} + static int hifn_probe(struct pci_dev *pdev, const struct pci_device_id *id) { int err, i; @@ -2489,6 +2505,8 @@ static int hifn_probe(struct pci_dev *pdev, const struct pci_device_id *id) pci_set_drvdata(pdev, dev); + tasklet_init(&dev->tasklet, hifn_tasklet_callback, (unsigned long)dev); + crypto_init_queue(&dev->queue, 1); err = request_irq(dev->irq, hifn_interrupt, IRQF_SHARED, dev->name, dev); @@ -2524,6 +2542,7 @@ err_out_stop_device: hifn_stop_device(dev); err_out_free_irq: free_irq(dev->irq, dev->name); + tasklet_kill(&dev->tasklet); err_out_free_desc: pci_free_consistent(pdev, sizeof(struct hifn_dma), dev->desc_virt, dev->desc_dma); @@ -2563,6 +2582,7 @@ static void hifn_remove(struct pci_dev *pdev) hifn_stop_device(dev); free_irq(dev->irq, dev->name); + tasklet_kill(&dev->tasklet); hifn_flush(dev); -- cgit v1.2.3-59-g8ed1b From 2707b937f322ba6b437f3dd1de05b9bb9756d803 Mon Sep 17 00:00:00 2001 From: Jan Glauber Date: Mon, 12 Nov 2007 21:56:38 +0800 Subject: [CRYPTO] hifn: Make Kconfig option depend on PCI The HIFN driver is currently selectable on s390 but wont compile. Since it looks like HIFN needs PCI make the Kconfig dependent on PCI, which is not available on s390. Signed-off-by: Jan Glauber Acked-by: Evgeniy Polyakov Signed-off-by: Herbert Xu --- drivers/crypto/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig index c2de1351819f..d848e1b1624b 100644 --- a/drivers/crypto/Kconfig +++ b/drivers/crypto/Kconfig @@ -88,6 +88,7 @@ config CRYPTO_DEV_HIFN_795X select CRYPTO_DES select CRYPTO_ALGAPI select CRYPTO_ABLKCIPHER + depends on PCI help This option allows you to have support for HIFN 795x crypto adapters. -- cgit v1.2.3-59-g8ed1b From 102d49d3d0f0f471b338b6805001fc3ca7bf663b Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 13 Nov 2007 21:55:28 +0800 Subject: [CRYPTO] hifn: Add missing includes alpha: drivers/crypto/hifn_795x.c: In function 'ablkcipher_walk_init': drivers/crypto/hifn_795x.c:1231: error: implicit declaration of function 'sg_init_table' drivers/crypto/hifn_795x.c:1243: error: implicit declaration of function 'sg_set_page' drivers/crypto/hifn_795x.c: In function 'ablkcipher_walk_exit': drivers/crypto/hifn_795x.c:1257: error: implicit declaration of function 'sg_page' drivers/crypto/hifn_795x.c:1257: warning: passing argument 1 of '__free_pages' makes pointer from integer without a cast drivers/crypto/hifn_795x.c: In function 'ablkcipher_add': drivers/crypto/hifn_795x.c:1278: warning: passing argument 1 of 'kmap_atomic' makes pointer from integer without a cast drivers/crypto/hifn_795x.c: In function 'ablkcipher_walk': drivers/crypto/hifn_795x.c:1336: warning: passing argument 1 of 'kmap_atomic' makes pointer from integer without a cast drivers/crypto/hifn_795x.c: In function 'hifn_setup_session': drivers/crypto/hifn_795x.c:1465: warning: assignment makes pointer from integer without a cast drivers/crypto/hifn_795x.c:1469: warning: assignment makes pointer from integer without a cast drivers/crypto/hifn_795x.c:1472: warning: assignment makes pointer from integer without a cast drivers/crypto/hifn_795x.c: In function 'ablkcipher_get': drivers/crypto/hifn_795x.c:1593: warning: passing argument 1 of 'kmap_atomic' makes pointer from integer without a cast {standard input}: Assembler messages: {standard input}:7: Warning: setting incorrect section attributes for .got drivers/crypto/hifn_795x.c: In function 'hifn_process_ready': drivers/crypto/hifn_795x.c:1653: warning: passing argument 1 of 'kmap_atomic' makes pointer from integer without a cast drivers/crypto/hifn_795x.c: In function 'hifn_probe': drivers/crypto/hifn_795x.c:2438: error: 'DMA_32BIT_MASK' undeclared (first use in this function) drivers/crypto/hifn_795x.c:2438: error: (Each undeclared identifier is reported only once drivers/crypto/hifn_795x.c:2438: error: for each function it appears in.) drivers/crypto/hifn_795x.c:2443: warning: format '%d' expects type 'int', but argument 4 has type 'long int' drivers/crypto/hifn_795x.c:2443: warning: format '%d' expects type 'int', but argument 4 has type 'long int' Signed-off-by: Andrew Morton Signed-off-by: Herbert Xu --- drivers/crypto/hifn_795x.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c index 7b7c85439c33..fec32aa1ec52 100644 --- a/drivers/crypto/hifn_795x.c +++ b/drivers/crypto/hifn_795x.c @@ -25,6 +25,8 @@ #include #include #include +#include +#include #include #include #include -- cgit v1.2.3-59-g8ed1b From 468577abe37ff7b453a9ac613e0ea155349203ae Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 15 Nov 2007 12:08:45 +0800 Subject: [CRYPTO] scatterwalk: Use generic scatterlist chaining This patch converts the crypto scatterwalk code to use the generic scatterlist chaining rather the version specific to crypto. Signed-off-by: Herbert Xu --- crypto/digest.c | 3 +-- crypto/hmac.c | 2 +- crypto/scatterwalk.c | 2 +- crypto/scatterwalk.h | 5 ----- 4 files changed, 3 insertions(+), 9 deletions(-) diff --git a/crypto/digest.c b/crypto/digest.c index 8871dec8cae7..d3e827a141f1 100644 --- a/crypto/digest.c +++ b/crypto/digest.c @@ -21,7 +21,6 @@ #include #include "internal.h" -#include "scatterwalk.h" static int init(struct hash_desc *desc) { @@ -77,7 +76,7 @@ static int update2(struct hash_desc *desc, if (!nbytes) break; - sg = scatterwalk_sg_next(sg); + sg = sg_next(sg); } return 0; diff --git a/crypto/hmac.c b/crypto/hmac.c index 0f05be769c34..34c3706db85d 100644 --- a/crypto/hmac.c +++ b/crypto/hmac.c @@ -160,7 +160,7 @@ static int hmac_digest(struct hash_desc *pdesc, struct scatterlist *sg, sg_init_table(sg1, 2); sg_set_buf(sg1, ipad, bs); - sg_set_page(&sg1[1], (void *) sg, 0, 0); + sg_chain(sg1, 2, sg); sg_init_table(sg2, 1); sg_set_buf(sg2, opad, bs + ds); diff --git a/crypto/scatterwalk.c b/crypto/scatterwalk.c index b9bbda0bb9f9..206c39a97e57 100644 --- a/crypto/scatterwalk.c +++ b/crypto/scatterwalk.c @@ -62,7 +62,7 @@ static void scatterwalk_pagedone(struct scatter_walk *walk, int out, walk->offset += PAGE_SIZE - 1; walk->offset &= PAGE_MASK; if (walk->offset >= walk->sg->offset + walk->sg->length) - scatterwalk_start(walk, scatterwalk_sg_next(walk->sg)); + scatterwalk_start(walk, sg_next(walk->sg)); } } diff --git a/crypto/scatterwalk.h b/crypto/scatterwalk.h index 87ed681cceba..fd5517d2a7a9 100644 --- a/crypto/scatterwalk.h +++ b/crypto/scatterwalk.h @@ -20,11 +20,6 @@ #include "internal.h" -static inline struct scatterlist *scatterwalk_sg_next(struct scatterlist *sg) -{ - return (++sg)->length ? sg : (void *) sg_page(sg); -} - static inline unsigned long scatterwalk_samebuf(struct scatter_walk *walk_in, struct scatter_walk *walk_out) { -- cgit v1.2.3-59-g8ed1b From 86f578de5ba6ea11ead9284d9f036fee01ba5893 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 15 Nov 2007 19:00:06 +0800 Subject: [CRYPTO] doc: Update api-intro.txt This patch updates the list of transforms we support and clarifies that the Block Ciphers interface in fact supports all ciphers including stream ciphers. It also removes the obsolete Configuration Notes section and adds the linux-crypto mailing list as the primary bug reporting address. Finally it documents the fact that setkey should only be called from user context. Signed-off-by: Herbert Xu --- Documentation/crypto/api-intro.txt | 41 +++++++++++++++----------------------- 1 file changed, 16 insertions(+), 25 deletions(-) diff --git a/Documentation/crypto/api-intro.txt b/Documentation/crypto/api-intro.txt index a2ac6d294793..8b49302712a8 100644 --- a/Documentation/crypto/api-intro.txt +++ b/Documentation/crypto/api-intro.txt @@ -33,9 +33,16 @@ The idea is to make the user interface and algorithm registration API very simple, while hiding the core logic from both. Many good ideas from existing APIs such as Cryptoapi and Nettle have been adapted for this. -The API currently supports three types of transforms: Ciphers, Digests and -Compressors. The compression algorithms especially seem to be performing -very well so far. +The API currently supports five main types of transforms: AEAD (Authenticated +Encryption with Associated Data), Block Ciphers, Ciphers, Compressors and +Hashes. + +Please note that Block Ciphers is somewhat of a misnomer. It is in fact +meant to support all ciphers including stream ciphers. The difference +between Block Ciphers and Ciphers is that the latter operates on exactly +one block while the former can operate on an arbitrary amount of data, +subject to block size requirements (i.e., non-stream ciphers can only +process multiples of blocks). Support for hardware crypto devices via an asynchronous interface is under development. @@ -69,29 +76,12 @@ Here's an example of how to use the API: Many real examples are available in the regression test module (tcrypt.c). -CONFIGURATION NOTES - -As Triple DES is part of the DES module, for those using modular builds, -add the following line to /etc/modprobe.conf: - - alias des3_ede des - -The Null algorithms reside in the crypto_null module, so these lines -should also be added: - - alias cipher_null crypto_null - alias digest_null crypto_null - alias compress_null crypto_null - -The SHA384 algorithm shares code within the SHA512 module, so you'll -also need: - alias sha384 sha512 - - DEVELOPER NOTES Transforms may only be allocated in user context, and cryptographic -methods may only be called from softirq and user contexts. +methods may only be called from softirq and user contexts. For +transforms with a setkey method it too should only be called from +user context. When using the API for ciphers, performance will be optimal if each scatterlist contains data which is a multiple of the cipher's block @@ -130,8 +120,9 @@ might already be working on. BUGS Send bug reports to: -Herbert Xu -Cc: David S. Miller +linux-crypto@vger.kernel.org +Cc: Herbert Xu , + David S. Miller FURTHER INFORMATION -- cgit v1.2.3-59-g8ed1b From 332f8840f7095d294f9bb066b175a100bcde214c Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 15 Nov 2007 22:36:07 +0800 Subject: [CRYPTO] ablkcipher: Add distinct ABLKCIPHER type Up until now we have ablkcipher algorithms have been identified as type BLKCIPHER with the ASYNC bit set. This is suboptimal because ablkcipher refers to two things. On the one hand it refers to the top-level ablkcipher interface with requests. On the other hand it refers to and algorithm type underneath. As it is you cannot request a synchronous block cipher algorithm with the ablkcipher interface on top. This is a problem because we want to be able to eventually phase out the blkcipher top-level interface. This patch fixes this by making ABLKCIPHER its own type, just as we have distinct types for HASH and DIGEST. The type it associated with the algorithm implementation only. Which top-level interface is used for synchronous block ciphers is then determined by the mask that's used. If it's a specific mask then the old blkcipher interface is given, otherwise we go with the new ablkcipher interface. Signed-off-by: Herbert Xu --- crypto/authenc.c | 2 +- crypto/blkcipher.c | 9 +++------ crypto/cryptd.c | 4 ++-- drivers/crypto/hifn_795x.c | 2 +- include/crypto/algapi.h | 4 ++-- include/linux/crypto.h | 18 ++++++++++-------- 6 files changed, 19 insertions(+), 20 deletions(-) diff --git a/crypto/authenc.c b/crypto/authenc.c index 126a529b496d..bc4e608ca841 100644 --- a/crypto/authenc.c +++ b/crypto/authenc.c @@ -292,7 +292,7 @@ static struct crypto_instance *crypto_authenc_alloc(struct rtattr **tb) goto out_put_auth; enc = crypto_attr_alg(tb[3], CRYPTO_ALG_TYPE_BLKCIPHER, - CRYPTO_ALG_TYPE_MASK); + CRYPTO_ALG_TYPE_BLKCIPHER_MASK); inst = ERR_PTR(PTR_ERR(enc)); if (IS_ERR(enc)) goto out_put_auth; diff --git a/crypto/blkcipher.c b/crypto/blkcipher.c index f6c67f9d4e5c..180d91451476 100644 --- a/crypto/blkcipher.c +++ b/crypto/blkcipher.c @@ -433,9 +433,8 @@ static unsigned int crypto_blkcipher_ctxsize(struct crypto_alg *alg, u32 type, struct blkcipher_alg *cipher = &alg->cra_blkcipher; unsigned int len = alg->cra_ctxsize; - type ^= CRYPTO_ALG_ASYNC; - mask &= CRYPTO_ALG_ASYNC; - if ((type & mask) && cipher->ivsize) { + if ((mask & CRYPTO_ALG_TYPE_MASK) == CRYPTO_ALG_TYPE_MASK && + cipher->ivsize) { len = ALIGN(len, (unsigned long)alg->cra_alignmask + 1); len += cipher->ivsize; } @@ -482,9 +481,7 @@ static int crypto_init_blkcipher_ops(struct crypto_tfm *tfm, u32 type, u32 mask) if (alg->ivsize > PAGE_SIZE / 8) return -EINVAL; - type ^= CRYPTO_ALG_ASYNC; - mask &= CRYPTO_ALG_ASYNC; - if (type & mask) + if ((mask & CRYPTO_ALG_TYPE_MASK) == CRYPTO_ALG_TYPE_MASK) return crypto_init_blkcipher_ops_sync(tfm); else return crypto_init_blkcipher_ops_async(tfm); diff --git a/crypto/cryptd.c b/crypto/cryptd.c index 8bf2da835f7b..1a5c45b96852 100644 --- a/crypto/cryptd.c +++ b/crypto/cryptd.c @@ -228,7 +228,7 @@ static struct crypto_instance *cryptd_alloc_blkcipher( struct crypto_alg *alg; alg = crypto_get_attr_alg(tb, CRYPTO_ALG_TYPE_BLKCIPHER, - CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_ASYNC); + CRYPTO_ALG_TYPE_MASK); if (IS_ERR(alg)) return ERR_PTR(PTR_ERR(alg)); @@ -236,7 +236,7 @@ static struct crypto_instance *cryptd_alloc_blkcipher( if (IS_ERR(inst)) goto out_put_alg; - inst->alg.cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | CRYPTO_ALG_ASYNC; + inst->alg.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC; inst->alg.cra_type = &crypto_ablkcipher_type; inst->alg.cra_ablkcipher.ivsize = alg->cra_blkcipher.ivsize; diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c index fec32aa1ec52..bf817d4ecae2 100644 --- a/drivers/crypto/hifn_795x.c +++ b/drivers/crypto/hifn_795x.c @@ -2361,7 +2361,7 @@ static int hifn_alg_alloc(struct hifn_device *dev, struct hifn_alg_template *t) snprintf(alg->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME, "%s", t->drv_name); alg->alg.cra_priority = 300; - alg->alg.cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER | CRYPTO_ALG_ASYNC; + alg->alg.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC; alg->alg.cra_blocksize = t->bsize; alg->alg.cra_ctxsize = sizeof(struct hifn_context); alg->alg.cra_alignmask = 15; diff --git a/include/crypto/algapi.h b/include/crypto/algapi.h index b9b05d399d2b..88619f902c10 100644 --- a/include/crypto/algapi.h +++ b/include/crypto/algapi.h @@ -191,7 +191,7 @@ static inline struct crypto_ablkcipher *crypto_spawn_ablkcipher( struct crypto_spawn *spawn) { u32 type = CRYPTO_ALG_TYPE_BLKCIPHER; - u32 mask = CRYPTO_ALG_TYPE_MASK; + u32 mask = CRYPTO_ALG_TYPE_BLKCIPHER_MASK; return __crypto_ablkcipher_cast(crypto_spawn_tfm(spawn, type, mask)); } @@ -200,7 +200,7 @@ static inline struct crypto_blkcipher *crypto_spawn_blkcipher( struct crypto_spawn *spawn) { u32 type = CRYPTO_ALG_TYPE_BLKCIPHER; - u32 mask = CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_ASYNC; + u32 mask = CRYPTO_ALG_TYPE_MASK; return __crypto_blkcipher_cast(crypto_spawn_tfm(spawn, type, mask)); } diff --git a/include/linux/crypto.h b/include/linux/crypto.h index f3110ebe894a..f56ae8721bc9 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -33,10 +33,12 @@ #define CRYPTO_ALG_TYPE_DIGEST 0x00000002 #define CRYPTO_ALG_TYPE_HASH 0x00000003 #define CRYPTO_ALG_TYPE_BLKCIPHER 0x00000004 -#define CRYPTO_ALG_TYPE_COMPRESS 0x00000005 -#define CRYPTO_ALG_TYPE_AEAD 0x00000006 +#define CRYPTO_ALG_TYPE_ABLKCIPHER 0x00000005 +#define CRYPTO_ALG_TYPE_COMPRESS 0x00000008 +#define CRYPTO_ALG_TYPE_AEAD 0x00000009 #define CRYPTO_ALG_TYPE_HASH_MASK 0x0000000e +#define CRYPTO_ALG_TYPE_BLKCIPHER_MASK 0x0000000c #define CRYPTO_ALG_LARVAL 0x00000010 #define CRYPTO_ALG_DEAD 0x00000020 @@ -530,7 +532,7 @@ static inline struct crypto_ablkcipher *crypto_alloc_ablkcipher( { type &= ~CRYPTO_ALG_TYPE_MASK; type |= CRYPTO_ALG_TYPE_BLKCIPHER; - mask |= CRYPTO_ALG_TYPE_MASK; + mask |= CRYPTO_ALG_TYPE_BLKCIPHER_MASK; return __crypto_ablkcipher_cast( crypto_alloc_base(alg_name, type, mask)); @@ -552,7 +554,7 @@ static inline int crypto_has_ablkcipher(const char *alg_name, u32 type, { type &= ~CRYPTO_ALG_TYPE_MASK; type |= CRYPTO_ALG_TYPE_BLKCIPHER; - mask |= CRYPTO_ALG_TYPE_MASK; + mask |= CRYPTO_ALG_TYPE_BLKCIPHER_MASK; return crypto_has_alg(alg_name, type, mask); } @@ -841,9 +843,9 @@ static inline struct crypto_blkcipher *crypto_blkcipher_cast( static inline struct crypto_blkcipher *crypto_alloc_blkcipher( const char *alg_name, u32 type, u32 mask) { - type &= ~(CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_ASYNC); + type &= ~CRYPTO_ALG_TYPE_MASK; type |= CRYPTO_ALG_TYPE_BLKCIPHER; - mask |= CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_ASYNC; + mask |= CRYPTO_ALG_TYPE_MASK; return __crypto_blkcipher_cast(crypto_alloc_base(alg_name, type, mask)); } @@ -861,9 +863,9 @@ static inline void crypto_free_blkcipher(struct crypto_blkcipher *tfm) static inline int crypto_has_blkcipher(const char *alg_name, u32 type, u32 mask) { - type &= ~(CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_ASYNC); + type &= ~CRYPTO_ALG_TYPE_MASK; type |= CRYPTO_ALG_TYPE_BLKCIPHER; - mask |= CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_ASYNC; + mask |= CRYPTO_ALG_TYPE_MASK; return crypto_has_alg(alg_name, type, mask); } -- cgit v1.2.3-59-g8ed1b From 2407d60872dd2a95404c6048f775f3b64d438f4b Mon Sep 17 00:00:00 2001 From: Tan Swee Heng Date: Fri, 23 Nov 2007 19:45:00 +0800 Subject: [CRYPTO] salsa20: Salsa20 stream cipher This patch implements the Salsa20 stream cipher using the blkcipher interface. The core cipher code comes from Daniel Bernstein's submission to eSTREAM: http://www.ecrypt.eu.org/stream/svn/viewcvs.cgi/ecrypt/trunk/submissions/salsa20/full/ref/ The test vectors comes from: http://www.ecrypt.eu.org/stream/svn/viewcvs.cgi/ecrypt/trunk/submissions/salsa20/full/ It has been tested successfully with "modprobe tcrypt mode=34" on an UML instance. Signed-off-by: Tan Swee Heng Signed-off-by: Herbert Xu --- crypto/Kconfig | 12 +++ crypto/Makefile | 1 + crypto/salsa20_generic.c | 243 +++++++++++++++++++++++++++++++++++++++++++++++ crypto/tcrypt.c | 8 +- crypto/tcrypt.h | 161 +++++++++++++++++++++++++++++++ 5 files changed, 424 insertions(+), 1 deletion(-) create mode 100644 crypto/salsa20_generic.c diff --git a/crypto/Kconfig b/crypto/Kconfig index 7758454b9f17..8d6cac97021f 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -454,6 +454,18 @@ config CRYPTO_SEED See also: +config CRYPTO_SALSA20 + tristate "Salsa20 stream cipher algorithm (EXPERIMENTAL)" + depends on EXPERIMENTAL + select CRYPTO_BLKCIPHER + help + Salsa20 stream cipher algorithm. + + Salsa20 is a stream cipher submitted to eSTREAM, the ECRYPT + Stream Cipher Project. See + + The Salsa20 stream cipher algorithm is designed by Daniel J. + Bernstein . See config CRYPTO_DEFLATE tristate "Deflate compression algorithm" diff --git a/crypto/Makefile b/crypto/Makefile index 1f87db2e45b9..9b1476e5f0da 100644 --- a/crypto/Makefile +++ b/crypto/Makefile @@ -49,6 +49,7 @@ obj-$(CONFIG_CRYPTO_TEA) += tea.o obj-$(CONFIG_CRYPTO_KHAZAD) += khazad.o obj-$(CONFIG_CRYPTO_ANUBIS) += anubis.o obj-$(CONFIG_CRYPTO_SEED) += seed.o +obj-$(CONFIG_CRYPTO_SALSA20) += salsa20_generic.o obj-$(CONFIG_CRYPTO_DEFLATE) += deflate.o obj-$(CONFIG_CRYPTO_MICHAEL_MIC) += michael_mic.o obj-$(CONFIG_CRYPTO_CRC32C) += crc32c.o diff --git a/crypto/salsa20_generic.c b/crypto/salsa20_generic.c new file mode 100644 index 000000000000..b49328afcf0a --- /dev/null +++ b/crypto/salsa20_generic.c @@ -0,0 +1,243 @@ +/* + * Salsa20: Salsa20 stream cipher algorithm + * + * Copyright (c) 2007 Tan Swee Heng + * + * Derived from: + * - salsa20.c: Public domain C code by Daniel J. Bernstein + * + * Salsa20 is a stream cipher candidate in eSTREAM, the ECRYPT Stream + * Cipher Project. It is designed by Daniel J. Bernstein . + * More information about eSTREAM and Salsa20 can be found here: + * http://www.ecrypt.eu.org/stream/ + * http://cr.yp.to/snuffle.html + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#define SALSA20_IV_SIZE 8U +#define SALSA20_MIN_KEY_SIZE 16U +#define SALSA20_MAX_KEY_SIZE 32U + +/* + * Start of code taken from D. J. Bernstein's reference implementation. + * With some modifications and optimizations made to suit our needs. + */ + +/* +salsa20-ref.c version 20051118 +D. J. Bernstein +Public domain. +*/ + +#define ROTATE(v,n) (((v) << (n)) | ((v) >> (32 - (n)))) +#define XOR(v,w) ((v) ^ (w)) +#define PLUS(v,w) (((v) + (w))) +#define PLUSONE(v) (PLUS((v),1)) +#define U32TO8_LITTLE(p, v) \ + { (p)[0] = (v >> 0) & 0xff; (p)[1] = (v >> 8) & 0xff; \ + (p)[2] = (v >> 16) & 0xff; (p)[3] = (v >> 24) & 0xff; } +#define U8TO32_LITTLE(p) \ + (((u32)((p)[0]) ) | ((u32)((p)[1]) << 8) | \ + ((u32)((p)[2]) << 16) | ((u32)((p)[3]) << 24) ) + +struct salsa20_ctx +{ + u32 input[16]; +}; + +static void salsa20_wordtobyte(u8 output[64], const u32 input[16]) +{ + u32 x[16]; + int i; + + memcpy(x, input, sizeof(x)); + for (i = 20; i > 0; i -= 2) { + x[ 4] = XOR(x[ 4],ROTATE(PLUS(x[ 0],x[12]), 7)); + x[ 8] = XOR(x[ 8],ROTATE(PLUS(x[ 4],x[ 0]), 9)); + x[12] = XOR(x[12],ROTATE(PLUS(x[ 8],x[ 4]),13)); + x[ 0] = XOR(x[ 0],ROTATE(PLUS(x[12],x[ 8]),18)); + x[ 9] = XOR(x[ 9],ROTATE(PLUS(x[ 5],x[ 1]), 7)); + x[13] = XOR(x[13],ROTATE(PLUS(x[ 9],x[ 5]), 9)); + x[ 1] = XOR(x[ 1],ROTATE(PLUS(x[13],x[ 9]),13)); + x[ 5] = XOR(x[ 5],ROTATE(PLUS(x[ 1],x[13]),18)); + x[14] = XOR(x[14],ROTATE(PLUS(x[10],x[ 6]), 7)); + x[ 2] = XOR(x[ 2],ROTATE(PLUS(x[14],x[10]), 9)); + x[ 6] = XOR(x[ 6],ROTATE(PLUS(x[ 2],x[14]),13)); + x[10] = XOR(x[10],ROTATE(PLUS(x[ 6],x[ 2]),18)); + x[ 3] = XOR(x[ 3],ROTATE(PLUS(x[15],x[11]), 7)); + x[ 7] = XOR(x[ 7],ROTATE(PLUS(x[ 3],x[15]), 9)); + x[11] = XOR(x[11],ROTATE(PLUS(x[ 7],x[ 3]),13)); + x[15] = XOR(x[15],ROTATE(PLUS(x[11],x[ 7]),18)); + x[ 1] = XOR(x[ 1],ROTATE(PLUS(x[ 0],x[ 3]), 7)); + x[ 2] = XOR(x[ 2],ROTATE(PLUS(x[ 1],x[ 0]), 9)); + x[ 3] = XOR(x[ 3],ROTATE(PLUS(x[ 2],x[ 1]),13)); + x[ 0] = XOR(x[ 0],ROTATE(PLUS(x[ 3],x[ 2]),18)); + x[ 6] = XOR(x[ 6],ROTATE(PLUS(x[ 5],x[ 4]), 7)); + x[ 7] = XOR(x[ 7],ROTATE(PLUS(x[ 6],x[ 5]), 9)); + x[ 4] = XOR(x[ 4],ROTATE(PLUS(x[ 7],x[ 6]),13)); + x[ 5] = XOR(x[ 5],ROTATE(PLUS(x[ 4],x[ 7]),18)); + x[11] = XOR(x[11],ROTATE(PLUS(x[10],x[ 9]), 7)); + x[ 8] = XOR(x[ 8],ROTATE(PLUS(x[11],x[10]), 9)); + x[ 9] = XOR(x[ 9],ROTATE(PLUS(x[ 8],x[11]),13)); + x[10] = XOR(x[10],ROTATE(PLUS(x[ 9],x[ 8]),18)); + x[12] = XOR(x[12],ROTATE(PLUS(x[15],x[14]), 7)); + x[13] = XOR(x[13],ROTATE(PLUS(x[12],x[15]), 9)); + x[14] = XOR(x[14],ROTATE(PLUS(x[13],x[12]),13)); + x[15] = XOR(x[15],ROTATE(PLUS(x[14],x[13]),18)); + } + for (i = 0; i < 16; ++i) + x[i] = PLUS(x[i],input[i]); + for (i = 0; i < 16; ++i) + U32TO8_LITTLE(output + 4 * i,x[i]); +} + +static const char sigma[16] = "expand 32-byte k"; +static const char tau[16] = "expand 16-byte k"; + +static void salsa20_keysetup(struct salsa20_ctx *ctx, const u8 *k, u32 kbytes) +{ + const char *constants; + + ctx->input[1] = U8TO32_LITTLE(k + 0); + ctx->input[2] = U8TO32_LITTLE(k + 4); + ctx->input[3] = U8TO32_LITTLE(k + 8); + ctx->input[4] = U8TO32_LITTLE(k + 12); + if (kbytes == 32) { /* recommended */ + k += 16; + constants = sigma; + } else { /* kbytes == 16 */ + constants = tau; + } + ctx->input[11] = U8TO32_LITTLE(k + 0); + ctx->input[12] = U8TO32_LITTLE(k + 4); + ctx->input[13] = U8TO32_LITTLE(k + 8); + ctx->input[14] = U8TO32_LITTLE(k + 12); + ctx->input[0] = U8TO32_LITTLE(constants + 0); + ctx->input[5] = U8TO32_LITTLE(constants + 4); + ctx->input[10] = U8TO32_LITTLE(constants + 8); + ctx->input[15] = U8TO32_LITTLE(constants + 12); +} + +static void salsa20_ivsetup(struct salsa20_ctx *ctx, const u8 *iv) +{ + ctx->input[6] = U8TO32_LITTLE(iv + 0); + ctx->input[7] = U8TO32_LITTLE(iv + 4); + ctx->input[8] = 0; + ctx->input[9] = 0; +} + +static void salsa20_encrypt_bytes(struct salsa20_ctx *ctx, u8 *dst, + const u8 *src, unsigned int bytes) +{ + u8 buf[64]; + int i; + + if (dst != src) + memcpy(dst, src, bytes); + + while (bytes) { + salsa20_wordtobyte(buf, ctx->input); + + ctx->input[8] = PLUSONE(ctx->input[8]); + if (!ctx->input[8]) + ctx->input[9] = PLUSONE(ctx->input[9]); + + if (bytes <= 64) { + for (i = 0; i < bytes/4; ++i) + ((u32*)dst)[i] ^= ((u32*)buf)[i]; + for (i = bytes - bytes % 4; i < bytes; ++i) + dst[i] ^= buf[i]; + return; + } + + for (i = 0; i < 64/4; ++i) + ((u32*)dst)[i] ^= ((u32*)buf)[i]; + bytes -= 64; + dst += 64; + } +} + +/* + * End of code taken from D. J. Bernstein's reference implementation. + */ + +static int setkey(struct crypto_tfm *tfm, const u8 *key, + unsigned int keysize) +{ + struct salsa20_ctx *ctx = crypto_tfm_ctx(tfm); + salsa20_keysetup(ctx, key, keysize); + return 0; +} + +static int encrypt(struct blkcipher_desc *desc, + struct scatterlist *dst, struct scatterlist *src, + unsigned int nbytes) +{ + struct blkcipher_walk walk; + struct crypto_blkcipher *tfm = desc->tfm; + struct salsa20_ctx *ctx = crypto_blkcipher_ctx(tfm); + int err; + + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + salsa20_ivsetup(ctx, walk.iv); + salsa20_encrypt_bytes(ctx, walk.dst.virt.addr, + walk.src.virt.addr, nbytes); + + err = blkcipher_walk_done(desc, &walk, 0); + return err; +} + +static struct crypto_alg alg = { + .cra_name = "salsa20", + .cra_driver_name = "salsa20-generic", + .cra_priority = 100, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_type = &crypto_blkcipher_type, + .cra_blocksize = 1, + .cra_ctxsize = sizeof(struct salsa20_ctx), + .cra_alignmask = 3, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(alg.cra_list), + .cra_u = { + .blkcipher = { + .setkey = setkey, + .encrypt = encrypt, + .decrypt = encrypt, + .min_keysize = SALSA20_MIN_KEY_SIZE, + .max_keysize = SALSA20_MAX_KEY_SIZE, + .ivsize = SALSA20_IV_SIZE, + } + } +}; + +static int __init init(void) +{ + return crypto_register_alg(&alg); +} + +static void __exit fini(void) +{ + crypto_unregister_alg(&alg); +} + +module_init(init); +module_exit(fini); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION ("Salsa20 stream cipher algorithm"); +MODULE_ALIAS("salsa20"); diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c index 4d364ccacbb2..b8cb1d1420ae 100644 --- a/crypto/tcrypt.c +++ b/crypto/tcrypt.c @@ -80,7 +80,7 @@ static char *check[] = { "cast6", "arc4", "michael_mic", "deflate", "crc32c", "tea", "xtea", "arc4", "michael_mic", "deflate", "crc32c", "tea", "xtea", "khazad", "wp512", "wp384", "wp256", "tnepres", "xeta", "fcrypt", - "camellia", "seed", NULL + "camellia", "seed", "salsa20", NULL }; static void hexdump(unsigned char *buf, unsigned int len) @@ -1309,6 +1309,12 @@ static void do_test(void) test_hash("sha224", sha224_tv_template, SHA224_TEST_VECTORS); break; + case 34: + test_cipher("salsa20", ENCRYPT, + salsa20_stream_enc_tv_template, + SALSA20_STREAM_ENC_TEST_VECTORS); + break; + case 100: test_hash("hmac(md5)", hmac_md5_tv_template, HMAC_MD5_TEST_VECTORS); diff --git a/crypto/tcrypt.h b/crypto/tcrypt.h index b91585ea1362..6ffc411bf464 100644 --- a/crypto/tcrypt.h +++ b/crypto/tcrypt.h @@ -4644,6 +4644,167 @@ static struct cipher_testvec seed_dec_tv_template[] = { } }; +#define SALSA20_STREAM_ENC_TEST_VECTORS 4 +static struct cipher_testvec salsa20_stream_enc_tv_template[] = { + /* + * Testvectors from verified.test-vectors submitted to ECRYPT. + * They are truncated to size 39, 64, 111, 129 to test a variety + * of input length. + */ + { /* Set 3, vector 0 */ + .key = { + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F + }, + .klen = 16, + .iv = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }, + .input = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + }, + .ilen = 39, + .result = { + 0x2D, 0xD5, 0xC3, 0xF7, 0xBA, 0x2B, 0x20, 0xF7, + 0x68, 0x02, 0x41, 0x0C, 0x68, 0x86, 0x88, 0x89, + 0x5A, 0xD8, 0xC1, 0xBD, 0x4E, 0xA6, 0xC9, 0xB1, + 0x40, 0xFB, 0x9B, 0x90, 0xE2, 0x10, 0x49, 0xBF, + 0x58, 0x3F, 0x52, 0x79, 0x70, 0xEB, 0xC1, + }, + .rlen = 39, + }, { /* Set 5, vector 0 */ + .key = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }, + .klen = 16, + .iv = { 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }, + .input = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + }, + .ilen = 64, + .result = { + 0xB6, 0x6C, 0x1E, 0x44, 0x46, 0xDD, 0x95, 0x57, + 0xE5, 0x78, 0xE2, 0x23, 0xB0, 0xB7, 0x68, 0x01, + 0x7B, 0x23, 0xB2, 0x67, 0xBB, 0x02, 0x34, 0xAE, + 0x46, 0x26, 0xBF, 0x44, 0x3F, 0x21, 0x97, 0x76, + 0x43, 0x6F, 0xB1, 0x9F, 0xD0, 0xE8, 0x86, 0x6F, + 0xCD, 0x0D, 0xE9, 0xA9, 0x53, 0x8F, 0x4A, 0x09, + 0xCA, 0x9A, 0xC0, 0x73, 0x2E, 0x30, 0xBC, 0xF9, + 0x8E, 0x4F, 0x13, 0xE4, 0xB9, 0xE2, 0x01, 0xD9, + }, + .rlen = 64, + }, { /* Set 3, vector 27 */ + .key = { + 0x1B, 0x1C, 0x1D, 0x1E, 0x1F, 0x20, 0x21, 0x22, + 0x23, 0x24, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, + 0x2B, 0x2C, 0x2D, 0x2E, 0x2F, 0x30, 0x31, 0x32, + 0x33, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A + }, + .klen = 32, + .iv = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }, + .input = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + }, + .ilen = 111, + .result = { + 0xAE, 0x39, 0x50, 0x8E, 0xAC, 0x9A, 0xEC, 0xE7, + 0xBF, 0x97, 0xBB, 0x20, 0xB9, 0xDE, 0xE4, 0x1F, + 0x87, 0xD9, 0x47, 0xF8, 0x28, 0x91, 0x35, 0x98, + 0xDB, 0x72, 0xCC, 0x23, 0x29, 0x48, 0x56, 0x5E, + 0x83, 0x7E, 0x0B, 0xF3, 0x7D, 0x5D, 0x38, 0x7B, + 0x2D, 0x71, 0x02, 0xB4, 0x3B, 0xB5, 0xD8, 0x23, + 0xB0, 0x4A, 0xDF, 0x3C, 0xEC, 0xB6, 0xD9, 0x3B, + 0x9B, 0xA7, 0x52, 0xBE, 0xC5, 0xD4, 0x50, 0x59, + + 0x15, 0x14, 0xB4, 0x0E, 0x40, 0xE6, 0x53, 0xD1, + 0x83, 0x9C, 0x5B, 0xA0, 0x92, 0x29, 0x6B, 0x5E, + 0x96, 0x5B, 0x1E, 0x2F, 0xD3, 0xAC, 0xC1, 0x92, + 0xB1, 0x41, 0x3F, 0x19, 0x2F, 0xC4, 0x3B, 0xC6, + 0x95, 0x46, 0x45, 0x54, 0xE9, 0x75, 0x03, 0x08, + 0x44, 0xAF, 0xE5, 0x8A, 0x81, 0x12, 0x09, + }, + .rlen = 111, + + }, { /* Set 5, vector 27 */ + .key = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }, + .klen = 32, + .iv = { 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00 }, + .input = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + + 0x00, + }, + .ilen = 129, + .result = { + 0xD2, 0xDB, 0x1A, 0x5C, 0xF1, 0xC1, 0xAC, 0xDB, + 0xE8, 0x1A, 0x7A, 0x43, 0x40, 0xEF, 0x53, 0x43, + 0x5E, 0x7F, 0x4B, 0x1A, 0x50, 0x52, 0x3F, 0x8D, + 0x28, 0x3D, 0xCF, 0x85, 0x1D, 0x69, 0x6E, 0x60, + 0xF2, 0xDE, 0x74, 0x56, 0x18, 0x1B, 0x84, 0x10, + 0xD4, 0x62, 0xBA, 0x60, 0x50, 0xF0, 0x61, 0xF2, + 0x1C, 0x78, 0x7F, 0xC1, 0x24, 0x34, 0xAF, 0x58, + 0xBF, 0x2C, 0x59, 0xCA, 0x90, 0x77, 0xF3, 0xB0, + + 0x5B, 0x4A, 0xDF, 0x89, 0xCE, 0x2C, 0x2F, 0xFC, + 0x67, 0xF0, 0xE3, 0x45, 0xE8, 0xB3, 0xB3, 0x75, + 0xA0, 0x95, 0x71, 0xA1, 0x29, 0x39, 0x94, 0xCA, + 0x45, 0x2F, 0xBD, 0xCB, 0x10, 0xB6, 0xBE, 0x9F, + 0x8E, 0xF9, 0xB2, 0x01, 0x0A, 0x5A, 0x0A, 0xB7, + 0x6B, 0x9D, 0x70, 0x8E, 0x4B, 0xD6, 0x2F, 0xCD, + 0x2E, 0x40, 0x48, 0x75, 0xE9, 0xE2, 0x21, 0x45, + 0x0B, 0xC9, 0xB6, 0xB5, 0x66, 0xBC, 0x9A, 0x59, + + 0x5A, + }, + .rlen = 129, + } +}; + /* * Compression stuff. */ -- cgit v1.2.3-59-g8ed1b From 984e976f5382ff09351ddd3b023937611396d739 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Wed, 21 Nov 2007 12:24:45 +0800 Subject: [HWRNG]: move status polling loop to data_present callbacks Handle waiting for new random within the drivers themselves, this allows to use better suited timeouts for the individual rngs. Signed-off-by: Patrick McHardy Acked-by: Michael Buesch Signed-off-by: Herbert Xu --- drivers/char/hw_random/amd-rng.c | 12 ++++++++++-- drivers/char/hw_random/core.c | 24 ++++++------------------ drivers/char/hw_random/geode-rng.c | 12 ++++++++++-- drivers/char/hw_random/intel-rng.c | 15 ++++++++++++--- drivers/char/hw_random/omap-rng.c | 13 +++++++++++-- drivers/char/hw_random/pasemi-rng.c | 14 +++++++++++--- drivers/char/hw_random/via-rng.c | 19 ++++++++++++------- include/linux/hw_random.h | 2 +- 8 files changed, 73 insertions(+), 38 deletions(-) diff --git a/drivers/char/hw_random/amd-rng.c b/drivers/char/hw_random/amd-rng.c index 556fd81fa815..c422e870dc52 100644 --- a/drivers/char/hw_random/amd-rng.c +++ b/drivers/char/hw_random/amd-rng.c @@ -28,6 +28,7 @@ #include #include #include +#include #include @@ -52,11 +53,18 @@ MODULE_DEVICE_TABLE(pci, pci_tbl); static struct pci_dev *amd_pdev; -static int amd_rng_data_present(struct hwrng *rng) +static int amd_rng_data_present(struct hwrng *rng, int wait) { u32 pmbase = (u32)rng->priv; + int data, i; - return !!(inl(pmbase + 0xF4) & 1); + for (i = 0; i < 20; i++) { + data = !!(inl(pmbase + 0xF4) & 1); + if (data || !wait) + break; + udelay(10); + } + return data; } static int amd_rng_data_read(struct hwrng *rng, u32 *data) diff --git a/drivers/char/hw_random/core.c b/drivers/char/hw_random/core.c index 26a860adcb38..0118b9817a95 100644 --- a/drivers/char/hw_random/core.c +++ b/drivers/char/hw_random/core.c @@ -66,11 +66,11 @@ static inline void hwrng_cleanup(struct hwrng *rng) rng->cleanup(rng); } -static inline int hwrng_data_present(struct hwrng *rng) +static inline int hwrng_data_present(struct hwrng *rng, int wait) { if (!rng->data_present) return 1; - return rng->data_present(rng); + return rng->data_present(rng, wait); } static inline int hwrng_data_read(struct hwrng *rng, u32 *data) @@ -94,8 +94,7 @@ static ssize_t rng_dev_read(struct file *filp, char __user *buf, { u32 data; ssize_t ret = 0; - int i, err = 0; - int data_present; + int err = 0; int bytes_read; while (size) { @@ -107,21 +106,10 @@ static ssize_t rng_dev_read(struct file *filp, char __user *buf, err = -ENODEV; goto out; } - if (filp->f_flags & O_NONBLOCK) { - data_present = hwrng_data_present(current_rng); - } else { - /* Some RNG require some time between data_reads to gather - * new entropy. Poll it. - */ - for (i = 0; i < 20; i++) { - data_present = hwrng_data_present(current_rng); - if (data_present) - break; - udelay(10); - } - } + bytes_read = 0; - if (data_present) + if (hwrng_data_present(current_rng, + !(filp->f_flags & O_NONBLOCK))) bytes_read = hwrng_data_read(current_rng, &data); mutex_unlock(&rng_mutex); diff --git a/drivers/char/hw_random/geode-rng.c b/drivers/char/hw_random/geode-rng.c index 8e8658dcd2e3..fed4ef5569f5 100644 --- a/drivers/char/hw_random/geode-rng.c +++ b/drivers/char/hw_random/geode-rng.c @@ -28,6 +28,7 @@ #include #include #include +#include #include @@ -61,11 +62,18 @@ static int geode_rng_data_read(struct hwrng *rng, u32 *data) return 4; } -static int geode_rng_data_present(struct hwrng *rng) +static int geode_rng_data_present(struct hwrng *rng, int wait) { void __iomem *mem = (void __iomem *)rng->priv; + int data, i; - return !!(readl(mem + GEODE_RNG_STATUS_REG)); + for (i = 0; i < 20; i++) { + data = !!(readl(mem + GEODE_RNG_STATUS_REG)); + if (data || !wait) + break; + udelay(10); + } + return data; } diff --git a/drivers/char/hw_random/intel-rng.c b/drivers/char/hw_random/intel-rng.c index 753f46052b87..5cc651ef75eb 100644 --- a/drivers/char/hw_random/intel-rng.c +++ b/drivers/char/hw_random/intel-rng.c @@ -29,6 +29,7 @@ #include #include #include +#include #include @@ -162,11 +163,19 @@ static inline u8 hwstatus_set(void __iomem *mem, return hwstatus_get(mem); } -static int intel_rng_data_present(struct hwrng *rng) +static int intel_rng_data_present(struct hwrng *rng, int wait) { void __iomem *mem = (void __iomem *)rng->priv; - - return !!(readb(mem + INTEL_RNG_STATUS) & INTEL_RNG_DATA_PRESENT); + int data, i; + + for (i = 0; i < 20; i++) { + data = !!(readb(mem + INTEL_RNG_STATUS) & + INTEL_RNG_DATA_PRESENT); + if (data || !wait) + break; + udelay(10); + } + return data; } static int intel_rng_data_read(struct hwrng *rng, u32 *data) diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c index 3f35a1c562b1..7e319951fa41 100644 --- a/drivers/char/hw_random/omap-rng.c +++ b/drivers/char/hw_random/omap-rng.c @@ -29,6 +29,7 @@ #include #include #include +#include #include @@ -65,9 +66,17 @@ static void omap_rng_write_reg(int reg, u32 val) } /* REVISIT: Does the status bit really work on 16xx? */ -static int omap_rng_data_present(struct hwrng *rng) +static int omap_rng_data_present(struct hwrng *rng, int wait) { - return omap_rng_read_reg(RNG_STAT_REG) ? 0 : 1; + int data, i; + + for (i = 0; i < 20; i++) { + data = omap_rng_read_reg(RNG_STAT_REG) ? 0 : 1; + if (data || !wait) + break; + udelay(10); + } + return data; } static int omap_rng_data_read(struct hwrng *rng, u32 *data) diff --git a/drivers/char/hw_random/pasemi-rng.c b/drivers/char/hw_random/pasemi-rng.c index fa6040b6c8f2..621adf25e580 100644 --- a/drivers/char/hw_random/pasemi-rng.c +++ b/drivers/char/hw_random/pasemi-rng.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -44,9 +45,16 @@ static int pasemi_rng_data_present(struct hwrng *rng) { void __iomem *rng_regs = (void __iomem *)rng->priv; - - return (in_le32(rng_regs + SDCRNG_CTL_REG) - & SDCRNG_CTL_FVLD_M) ? 1 : 0; + int data, i; + + for (i = 0; i < 20; i++) { + data = (in_le32(rng_regs + SDCRNG_CTL_REG) + & SDCRNG_CTL_FVLD_M) ? 1 : 0; + if (data || !wait) + break; + udelay(10); + } + return data; } static int pasemi_rng_data_read(struct hwrng *rng, u32 *data) diff --git a/drivers/char/hw_random/via-rng.c b/drivers/char/hw_random/via-rng.c index ec435cb25c4f..868e39fd42e4 100644 --- a/drivers/char/hw_random/via-rng.c +++ b/drivers/char/hw_random/via-rng.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include #include @@ -77,10 +78,11 @@ static inline u32 xstore(u32 *addr, u32 edx_in) return eax_out; } -static int via_rng_data_present(struct hwrng *rng) +static int via_rng_data_present(struct hwrng *rng, int wait) { u32 bytes_out; u32 *via_rng_datum = (u32 *)(&rng->priv); + int i; /* We choose the recommended 1-byte-per-instruction RNG rate, * for greater randomness at the expense of speed. Larger @@ -95,12 +97,15 @@ static int via_rng_data_present(struct hwrng *rng) * completes. */ - *via_rng_datum = 0; /* paranoia, not really necessary */ - bytes_out = xstore(via_rng_datum, VIA_RNG_CHUNK_1); - bytes_out &= VIA_XSTORE_CNT_MASK; - if (bytes_out == 0) - return 0; - return 1; + for (i = 0; i < 20; i++) { + *via_rng_datum = 0; /* paranoia, not really necessary */ + bytes_out = xstore(via_rng_datum, VIA_RNG_CHUNK_1); + bytes_out &= VIA_XSTORE_CNT_MASK; + if (bytes_out || !wait) + break; + udelay(10); + } + return bytes_out ? 1 : 0; } static int via_rng_data_read(struct hwrng *rng, u32 *data) diff --git a/include/linux/hw_random.h b/include/linux/hw_random.h index 21ea7610e177..85d11916e9ea 100644 --- a/include/linux/hw_random.h +++ b/include/linux/hw_random.h @@ -33,7 +33,7 @@ struct hwrng { const char *name; int (*init)(struct hwrng *rng); void (*cleanup)(struct hwrng *rng); - int (*data_present)(struct hwrng *rng); + int (*data_present)(struct hwrng *rng, int wait); int (*data_read)(struct hwrng *rng, u32 *data); unsigned long priv; -- cgit v1.2.3-59-g8ed1b From 37a8023ce59bfc1fa24067fd94aee7b286f4c01b Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Wed, 21 Nov 2007 12:47:13 +0800 Subject: [HIFN]: Improve PLL initialization The current PLL initalization has a number of deficiencies: - uses fixed multiplier of 8, which overclocks the chip when using a reference clock that operates at frequencies above 33MHz. According to a comment in the BSD source, this is true for the external clock on almost all every board. - writes to a reserved bit - doesn't follow the initialization procedure specified in chapter 6.11.1 of the HIFN hardware users guide - doesn't allow to use the PCI clock This patch adds a module parameter to specify the reference clock (pci or external) and its frequency and uses that to calculate the optimum multiplier to reach the maximal speed. By default it uses the external clock and assumes a speed of 66MHz, which effectively halfs the frequency currently used. Signed-off-by: Patrick McHardy Acked-by: Evgeniy Polyakov Signed-off-by: Herbert Xu --- drivers/crypto/hifn_795x.c | 110 ++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 108 insertions(+), 2 deletions(-) diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c index bf817d4ecae2..de594bc97742 100644 --- a/drivers/crypto/hifn_795x.c +++ b/drivers/crypto/hifn_795x.c @@ -19,6 +19,7 @@ #include #include +#include #include #include #include @@ -47,6 +48,11 @@ #define dprintk(f, a...) do {} while (0) #endif +static char hifn_pll_ref[sizeof("extNNN")] = "ext"; +module_param_string(hifn_pll_ref, hifn_pll_ref, sizeof(hifn_pll_ref), 0444); +MODULE_PARM_DESC(hifn_pll_ref, + "PLL reference clock (pci[freq] or ext[freq], default ext)"); + static atomic_t hifn_dev_number; #define ACRYPTO_OP_DECRYPT 0 @@ -286,7 +292,26 @@ static atomic_t hifn_dev_number; #define HIFN_DMACNFG_DMARESET 0x00000002 /* DMA Reset # */ #define HIFN_DMACNFG_MSTRESET 0x00000001 /* Master Reset # */ -#define HIFN_PLL_7956 0x00001d18 /* 7956 PLL config value */ +/* PLL configuration register */ +#define HIFN_PLL_REF_CLK_HBI 0x00000000 /* HBI reference clock */ +#define HIFN_PLL_REF_CLK_PLL 0x00000001 /* PLL reference clock */ +#define HIFN_PLL_BP 0x00000002 /* Reference clock bypass */ +#define HIFN_PLL_PK_CLK_HBI 0x00000000 /* PK engine HBI clock */ +#define HIFN_PLL_PK_CLK_PLL 0x00000008 /* PK engine PLL clock */ +#define HIFN_PLL_PE_CLK_HBI 0x00000000 /* PE engine HBI clock */ +#define HIFN_PLL_PE_CLK_PLL 0x00000010 /* PE engine PLL clock */ +#define HIFN_PLL_RESERVED_1 0x00000400 /* Reserved bit, must be 1 */ +#define HIFN_PLL_ND_SHIFT 11 /* Clock multiplier shift */ +#define HIFN_PLL_ND_MULT_2 0x00000000 /* PLL clock multiplier 2 */ +#define HIFN_PLL_ND_MULT_4 0x00000800 /* PLL clock multiplier 4 */ +#define HIFN_PLL_ND_MULT_6 0x00001000 /* PLL clock multiplier 6 */ +#define HIFN_PLL_ND_MULT_8 0x00001800 /* PLL clock multiplier 8 */ +#define HIFN_PLL_ND_MULT_10 0x00002000 /* PLL clock multiplier 10 */ +#define HIFN_PLL_ND_MULT_12 0x00002800 /* PLL clock multiplier 12 */ +#define HIFN_PLL_IS_1_8 0x00000000 /* charge pump (mult. 1-8) */ +#define HIFN_PLL_IS_9_12 0x00010000 /* charge pump (mult. 9-12) */ + +#define HIFN_PLL_FCK_MAX 266 /* Maximum PLL frequency */ /* Public key reset register (HIFN_1_PUB_RESET) */ #define HIFN_PUBRST_RESET 0x00000001 /* reset public/rng unit */ @@ -871,6 +896,64 @@ static void hifn_init_dma(struct hifn_device *dev) dma->cmdk = dma->srck = dma->dstk = dma->resk = 0; } +/* + * Initialize the PLL. We need to know the frequency of the reference clock + * to calculate the optimal multiplier. For PCI we assume 66MHz, since that + * allows us to operate without the risk of overclocking the chip. If it + * actually uses 33MHz, the chip will operate at half the speed, this can be + * overriden by specifying the frequency as module parameter (pci33). + * + * Unfortunately the PCI clock is not very suitable since the HIFN needs a + * stable clock and the PCI clock frequency may vary, so the default is the + * external clock. There is no way to find out its frequency, we default to + * 66MHz since according to Mike Ham of HiFn, almost every board in existence + * has an external crystal populated at 66MHz. + */ +static void hifn_init_pll(struct hifn_device *dev) +{ + unsigned int freq, m; + u32 pllcfg; + + pllcfg = HIFN_1_PLL | HIFN_PLL_RESERVED_1; + + if (strncmp(hifn_pll_ref, "ext", 3) == 0) + pllcfg |= HIFN_PLL_REF_CLK_PLL; + else + pllcfg |= HIFN_PLL_REF_CLK_HBI; + + if (hifn_pll_ref[3] != '\0') + freq = simple_strtoul(hifn_pll_ref + 3, NULL, 10); + else { + freq = 66; + printk(KERN_INFO "hifn795x: assuming %uMHz clock speed, " + "override with hifn_pll_ref=%.3s\n", + freq, hifn_pll_ref); + } + + m = HIFN_PLL_FCK_MAX / freq; + + pllcfg |= (m / 2 - 1) << HIFN_PLL_ND_SHIFT; + if (m <= 8) + pllcfg |= HIFN_PLL_IS_1_8; + else + pllcfg |= HIFN_PLL_IS_9_12; + + /* Select clock source and enable clock bypass */ + hifn_write_1(dev, HIFN_1_PLL, pllcfg | + HIFN_PLL_PK_CLK_HBI | HIFN_PLL_PE_CLK_HBI | HIFN_PLL_BP); + + /* Let the chip lock to the input clock */ + mdelay(10); + + /* Disable clock bypass */ + hifn_write_1(dev, HIFN_1_PLL, pllcfg | + HIFN_PLL_PK_CLK_HBI | HIFN_PLL_PE_CLK_HBI); + + /* Switch the engines to the PLL */ + hifn_write_1(dev, HIFN_1_PLL, pllcfg | + HIFN_PLL_PK_CLK_PLL | HIFN_PLL_PE_CLK_PLL); +} + static void hifn_init_registers(struct hifn_device *dev) { u32 dptr = dev->desc_dma; @@ -938,7 +1021,7 @@ static void hifn_init_registers(struct hifn_device *dev) #else hifn_write_0(dev, HIFN_0_PUCNFG, 0x10342); #endif - hifn_write_1(dev, HIFN_1_PLL, HIFN_PLL_7956); + hifn_init_pll(dev); hifn_write_0(dev, HIFN_0_PUISR, HIFN_PUISR_DSTOVER); hifn_write_1(dev, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET | @@ -2621,8 +2704,31 @@ static struct pci_driver hifn_pci_driver = { static int __devinit hifn_init(void) { + unsigned int freq; int err; + if (strncmp(hifn_pll_ref, "ext", 3) && + strncmp(hifn_pll_ref, "pci", 3)) { + printk(KERN_ERR "hifn795x: invalid hifn_pll_ref clock, " + "must be pci or ext"); + return -EINVAL; + } + + /* + * For the 7955/7956 the reference clock frequency must be in the + * range of 20MHz-100MHz. For the 7954 the upper bound is 66.67MHz, + * but this chip is currently not supported. + */ + if (hifn_pll_ref[3] != '\0') { + freq = simple_strtoul(hifn_pll_ref + 3, NULL, 10); + if (freq < 20 || freq > 100) { + printk(KERN_ERR "hifn795x: invalid hifn_pll_ref " + "frequency, must be in the range " + "of 20-100"); + return -EINVAL; + } + } + err = pci_register_driver(&hifn_pci_driver); if (err < 0) { dprintk("Failed to register PCI driver for %s device.\n", -- cgit v1.2.3-59-g8ed1b From fcd06755936d2209b69650d2a7cc99cbcd3ccc67 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Wed, 21 Nov 2007 12:51:52 +0800 Subject: [HIFN]: Add support for using the random number generator Signed-off-by: Patrick McHardy Acked-by: Evgeniy Polyakov Signed-off-by: Herbert Xu --- drivers/crypto/hifn_795x.c | 82 +++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 81 insertions(+), 1 deletion(-) diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c index de594bc97742..1a197003f1a2 100644 --- a/drivers/crypto/hifn_795x.c +++ b/drivers/crypto/hifn_795x.c @@ -31,6 +31,8 @@ #include #include #include +#include +#include #include #include @@ -458,6 +460,14 @@ struct hifn_device struct crypto_queue queue; struct list_head alg_list; + + unsigned int pk_clk_freq; + +#if defined(CONFIG_HW_RANDOM) || defined(CONFIG_HW_RANDOM_MODULE) + unsigned int rng_wait_time; + ktime_t rngtime; + struct hwrng rng; +#endif }; #define HIFN_D_LENGTH 0x0000ffff @@ -785,6 +795,56 @@ static struct pci2id { } }; +#if defined(CONFIG_HW_RANDOM) || defined(CONFIG_HW_RANDOM_MODULE) +static int hifn_rng_data_present(struct hwrng *rng, int wait) +{ + struct hifn_device *dev = (struct hifn_device *)rng->priv; + s64 nsec; + + nsec = ktime_to_ns(ktime_sub(ktime_get(), dev->rngtime)); + nsec -= dev->rng_wait_time; + if (nsec <= 0) + return 1; + if (!wait) + return 0; + ndelay(nsec); + return 1; +} + +static int hifn_rng_data_read(struct hwrng *rng, u32 *data) +{ + struct hifn_device *dev = (struct hifn_device *)rng->priv; + + *data = hifn_read_1(dev, HIFN_1_RNG_DATA); + dev->rngtime = ktime_get(); + return 4; +} + +static int hifn_register_rng(struct hifn_device *dev) +{ + /* + * We must wait at least 256 Pk_clk cycles between two reads of the rng. + */ + dev->rng_wait_time = DIV_ROUND_UP(NSEC_PER_SEC, dev->pk_clk_freq) * + 256; + + dev->rng.name = dev->name; + dev->rng.data_present = hifn_rng_data_present, + dev->rng.data_read = hifn_rng_data_read, + dev->rng.priv = (unsigned long)dev; + + return hwrng_register(&dev->rng); +} + +static void hifn_unregister_rng(struct hifn_device *dev) +{ + hwrng_unregister(&dev->rng); +} +#else +#define hifn_register_rng(dev) 0 +#define hifn_unregister_rng(dev) +#endif + static int hifn_init_pubrng(struct hifn_device *dev) { int i; @@ -820,6 +880,11 @@ static int hifn_init_pubrng(struct hifn_device *dev) dprintk("Chip %s: RNG engine has been successfully initialised.\n", dev->name); +#if defined(CONFIG_HW_RANDOM) || defined(CONFIG_HW_RANDOM_MODULE) + /* First value must be discarded */ + hifn_read_1(dev, HIFN_1_RNG_DATA); + dev->rngtime = ktime_get(); +#endif return 0; } @@ -952,6 +1017,14 @@ static void hifn_init_pll(struct hifn_device *dev) /* Switch the engines to the PLL */ hifn_write_1(dev, HIFN_1_PLL, pllcfg | HIFN_PLL_PK_CLK_PLL | HIFN_PLL_PE_CLK_PLL); + + /* + * The Fpk_clk runs at half the total speed. Its frequency is needed to + * calculate the minimum time between two reads of the rng. Since 33MHz + * is actually 33.333... we overestimate the frequency here, resulting + * in slightly larger intervals. + */ + dev->pk_clk_freq = 1000000 * (freq + 1) * m / 2; } static void hifn_init_registers(struct hifn_device *dev) @@ -2609,10 +2682,14 @@ static int hifn_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (err) goto err_out_stop_device; - err = hifn_register_alg(dev); + err = hifn_register_rng(dev); if (err) goto err_out_stop_device; + err = hifn_register_alg(dev); + if (err) + goto err_out_unregister_rng; + INIT_DELAYED_WORK(&dev->work, hifn_work); schedule_delayed_work(&dev->work, HZ); @@ -2622,6 +2699,8 @@ static int hifn_probe(struct pci_dev *pdev, const struct pci_device_id *id) return 0; +err_out_unregister_rng: + hifn_unregister_rng(dev); err_out_stop_device: hifn_reset_dma(dev, 1); hifn_stop_device(dev); @@ -2662,6 +2741,7 @@ static void hifn_remove(struct pci_dev *pdev) cancel_delayed_work(&dev->work); flush_scheduled_work(); + hifn_unregister_rng(dev); hifn_unregister_alg(dev); hifn_reset_dma(dev, 1); hifn_stop_device(dev); -- cgit v1.2.3-59-g8ed1b From 7613636def82092a5c7b6322078a2af832410417 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 20 Nov 2007 17:26:06 +0800 Subject: [CRYPTO] api: Add crypto_inc and crypto_xor With the addition of more stream ciphers we need to curb the proliferation of ad-hoc xor functions. This patch creates a generic pair of functions, crypto_inc and crypto_xor which does big-endian increment and exclusive or, respectively. For optimum performance, they both use u32 operations so alignment must be as that of u32 even though the arguments are of type u8 *. Signed-off-by: Herbert Xu --- crypto/algapi.c | 47 +++++++++++++++++++++++++++++++++++++++++++++++ include/crypto/algapi.h | 4 ++++ 2 files changed, 51 insertions(+) diff --git a/crypto/algapi.c b/crypto/algapi.c index 8383282de1dd..08eca6da1d53 100644 --- a/crypto/algapi.c +++ b/crypto/algapi.c @@ -605,6 +605,53 @@ int crypto_tfm_in_queue(struct crypto_queue *queue, struct crypto_tfm *tfm) } EXPORT_SYMBOL_GPL(crypto_tfm_in_queue); +static inline void crypto_inc_byte(u8 *a, unsigned int size) +{ + u8 *b = (a + size); + u8 c; + + for (; size; size--) { + c = *--b + 1; + *b = c; + if (c) + break; + } +} + +void crypto_inc(u8 *a, unsigned int size) +{ + __be32 *b = (__be32 *)(a + size); + u32 c; + + for (; size >= 4; size -= 4) { + c = be32_to_cpu(*--b) + 1; + *b = cpu_to_be32(c); + if (c) + return; + } + + crypto_inc_byte(a, size); +} +EXPORT_SYMBOL_GPL(crypto_inc); + +static inline void crypto_xor_byte(u8 *a, const u8 *b, unsigned int size) +{ + for (; size; size--) + *a++ ^= *b++; +} + +void crypto_xor(u8 *dst, const u8 *src, unsigned int size) +{ + u32 *a = (u32 *)dst; + u32 *b = (u32 *)src; + + for (; size >= 4; size -= 4) + *a++ ^= *b++; + + crypto_xor_byte((u8 *)a, (u8 *)b, size); +} +EXPORT_SYMBOL_GPL(crypto_xor); + static int __init crypto_algapi_init(void) { crypto_init_proc(); diff --git a/include/crypto/algapi.h b/include/crypto/algapi.h index 88619f902c10..2cdb227fc39d 100644 --- a/include/crypto/algapi.h +++ b/include/crypto/algapi.h @@ -124,6 +124,10 @@ int crypto_enqueue_request(struct crypto_queue *queue, struct crypto_async_request *crypto_dequeue_request(struct crypto_queue *queue); int crypto_tfm_in_queue(struct crypto_queue *queue, struct crypto_tfm *tfm); +/* These functions require the input/output to be aligned as u32. */ +void crypto_inc(u8 *a, unsigned int size); +void crypto_xor(u8 *dst, const u8 *src, unsigned int size); + int blkcipher_walk_done(struct blkcipher_desc *desc, struct blkcipher_walk *walk, int err); int blkcipher_walk_virt(struct blkcipher_desc *desc, -- cgit v1.2.3-59-g8ed1b From 3c7f076da557eadb37240d70b0399ff9763fa2ae Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 20 Nov 2007 17:33:39 +0800 Subject: [CRYPTO] cbc: Use crypto_xor This patch replaces the custom xor in CBC with the generic crypto_xor. Signed-off-by: Herbert Xu --- crypto/cbc.c | 93 +++++++++++------------------------------------------------- 1 file changed, 16 insertions(+), 77 deletions(-) diff --git a/crypto/cbc.c b/crypto/cbc.c index 1f2649e13b42..b013d6fec1eb 100644 --- a/crypto/cbc.c +++ b/crypto/cbc.c @@ -20,7 +20,6 @@ struct crypto_cbc_ctx { struct crypto_cipher *child; - void (*xor)(u8 *dst, const u8 *src, unsigned int bs); }; static int crypto_cbc_setkey(struct crypto_tfm *parent, const u8 *key, @@ -41,9 +40,7 @@ static int crypto_cbc_setkey(struct crypto_tfm *parent, const u8 *key, static int crypto_cbc_encrypt_segment(struct blkcipher_desc *desc, struct blkcipher_walk *walk, - struct crypto_cipher *tfm, - void (*xor)(u8 *, const u8 *, - unsigned int)) + struct crypto_cipher *tfm) { void (*fn)(struct crypto_tfm *, u8 *, const u8 *) = crypto_cipher_alg(tfm)->cia_encrypt; @@ -54,7 +51,7 @@ static int crypto_cbc_encrypt_segment(struct blkcipher_desc *desc, u8 *iv = walk->iv; do { - xor(iv, src, bsize); + crypto_xor(iv, src, bsize); fn(crypto_cipher_tfm(tfm), dst, iv); memcpy(iv, dst, bsize); @@ -67,9 +64,7 @@ static int crypto_cbc_encrypt_segment(struct blkcipher_desc *desc, static int crypto_cbc_encrypt_inplace(struct blkcipher_desc *desc, struct blkcipher_walk *walk, - struct crypto_cipher *tfm, - void (*xor)(u8 *, const u8 *, - unsigned int)) + struct crypto_cipher *tfm) { void (*fn)(struct crypto_tfm *, u8 *, const u8 *) = crypto_cipher_alg(tfm)->cia_encrypt; @@ -79,7 +74,7 @@ static int crypto_cbc_encrypt_inplace(struct blkcipher_desc *desc, u8 *iv = walk->iv; do { - xor(src, iv, bsize); + crypto_xor(src, iv, bsize); fn(crypto_cipher_tfm(tfm), src, src); iv = src; @@ -99,7 +94,6 @@ static int crypto_cbc_encrypt(struct blkcipher_desc *desc, struct crypto_blkcipher *tfm = desc->tfm; struct crypto_cbc_ctx *ctx = crypto_blkcipher_ctx(tfm); struct crypto_cipher *child = ctx->child; - void (*xor)(u8 *, const u8 *, unsigned int bs) = ctx->xor; int err; blkcipher_walk_init(&walk, dst, src, nbytes); @@ -107,11 +101,9 @@ static int crypto_cbc_encrypt(struct blkcipher_desc *desc, while ((nbytes = walk.nbytes)) { if (walk.src.virt.addr == walk.dst.virt.addr) - nbytes = crypto_cbc_encrypt_inplace(desc, &walk, child, - xor); + nbytes = crypto_cbc_encrypt_inplace(desc, &walk, child); else - nbytes = crypto_cbc_encrypt_segment(desc, &walk, child, - xor); + nbytes = crypto_cbc_encrypt_segment(desc, &walk, child); err = blkcipher_walk_done(desc, &walk, nbytes); } @@ -120,9 +112,7 @@ static int crypto_cbc_encrypt(struct blkcipher_desc *desc, static int crypto_cbc_decrypt_segment(struct blkcipher_desc *desc, struct blkcipher_walk *walk, - struct crypto_cipher *tfm, - void (*xor)(u8 *, const u8 *, - unsigned int)) + struct crypto_cipher *tfm) { void (*fn)(struct crypto_tfm *, u8 *, const u8 *) = crypto_cipher_alg(tfm)->cia_decrypt; @@ -134,7 +124,7 @@ static int crypto_cbc_decrypt_segment(struct blkcipher_desc *desc, do { fn(crypto_cipher_tfm(tfm), dst, src); - xor(dst, iv, bsize); + crypto_xor(dst, iv, bsize); iv = src; src += bsize; @@ -148,9 +138,7 @@ static int crypto_cbc_decrypt_segment(struct blkcipher_desc *desc, static int crypto_cbc_decrypt_inplace(struct blkcipher_desc *desc, struct blkcipher_walk *walk, - struct crypto_cipher *tfm, - void (*xor)(u8 *, const u8 *, - unsigned int)) + struct crypto_cipher *tfm) { void (*fn)(struct crypto_tfm *, u8 *, const u8 *) = crypto_cipher_alg(tfm)->cia_decrypt; @@ -171,11 +159,11 @@ static int crypto_cbc_decrypt_inplace(struct blkcipher_desc *desc, fn(crypto_cipher_tfm(tfm), src, src); if ((nbytes -= bsize) < bsize) break; - xor(src, src - bsize, bsize); + crypto_xor(src, src - bsize, bsize); src -= bsize; } - xor(src, first_iv, bsize); + crypto_xor(src, first_iv, bsize); return nbytes; } @@ -188,7 +176,6 @@ static int crypto_cbc_decrypt(struct blkcipher_desc *desc, struct crypto_blkcipher *tfm = desc->tfm; struct crypto_cbc_ctx *ctx = crypto_blkcipher_ctx(tfm); struct crypto_cipher *child = ctx->child; - void (*xor)(u8 *, const u8 *, unsigned int bs) = ctx->xor; int err; blkcipher_walk_init(&walk, dst, src, nbytes); @@ -196,48 +183,15 @@ static int crypto_cbc_decrypt(struct blkcipher_desc *desc, while ((nbytes = walk.nbytes)) { if (walk.src.virt.addr == walk.dst.virt.addr) - nbytes = crypto_cbc_decrypt_inplace(desc, &walk, child, - xor); + nbytes = crypto_cbc_decrypt_inplace(desc, &walk, child); else - nbytes = crypto_cbc_decrypt_segment(desc, &walk, child, - xor); + nbytes = crypto_cbc_decrypt_segment(desc, &walk, child); err = blkcipher_walk_done(desc, &walk, nbytes); } return err; } -static void xor_byte(u8 *a, const u8 *b, unsigned int bs) -{ - do { - *a++ ^= *b++; - } while (--bs); -} - -static void xor_quad(u8 *dst, const u8 *src, unsigned int bs) -{ - u32 *a = (u32 *)dst; - u32 *b = (u32 *)src; - - do { - *a++ ^= *b++; - } while ((bs -= 4)); -} - -static void xor_64(u8 *a, const u8 *b, unsigned int bs) -{ - ((u32 *)a)[0] ^= ((u32 *)b)[0]; - ((u32 *)a)[1] ^= ((u32 *)b)[1]; -} - -static void xor_128(u8 *a, const u8 *b, unsigned int bs) -{ - ((u32 *)a)[0] ^= ((u32 *)b)[0]; - ((u32 *)a)[1] ^= ((u32 *)b)[1]; - ((u32 *)a)[2] ^= ((u32 *)b)[2]; - ((u32 *)a)[3] ^= ((u32 *)b)[3]; -} - static int crypto_cbc_init_tfm(struct crypto_tfm *tfm) { struct crypto_instance *inst = (void *)tfm->__crt_alg; @@ -245,22 +199,6 @@ static int crypto_cbc_init_tfm(struct crypto_tfm *tfm) struct crypto_cbc_ctx *ctx = crypto_tfm_ctx(tfm); struct crypto_cipher *cipher; - switch (crypto_tfm_alg_blocksize(tfm)) { - case 8: - ctx->xor = xor_64; - break; - - case 16: - ctx->xor = xor_128; - break; - - default: - if (crypto_tfm_alg_blocksize(tfm) % 4) - ctx->xor = xor_byte; - else - ctx->xor = xor_quad; - } - cipher = crypto_spawn_cipher(spawn); if (IS_ERR(cipher)) return PTR_ERR(cipher); @@ -300,8 +238,9 @@ static struct crypto_instance *crypto_cbc_alloc(struct rtattr **tb) inst->alg.cra_alignmask = alg->cra_alignmask; inst->alg.cra_type = &crypto_blkcipher_type; - if (!(alg->cra_blocksize % 4)) - inst->alg.cra_alignmask |= 3; + /* We access the data as u32s when xoring. */ + inst->alg.cra_alignmask |= __alignof__(u32) - 1; + inst->alg.cra_blkcipher.ivsize = alg->cra_blocksize; inst->alg.cra_blkcipher.min_keysize = alg->cra_cipher.cia_min_keysize; inst->alg.cra_blkcipher.max_keysize = alg->cra_cipher.cia_max_keysize; -- cgit v1.2.3-59-g8ed1b From 50b6544e1371bfe884f787107a8de0c2f8546e8f Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 20 Nov 2007 17:36:00 +0800 Subject: [CRYPTO] cbc: Require block size to be a power of 2 All common block ciphers have a block size that's a power of 2. In fact, all of our block ciphers obey this rule. If we require this then CBC can be optimised to avoid an expensive divide on in-place decryption. I've also changed the saving of the first IV in the in-place decryption case to the last IV because that lets us use walk->iv (which is already aligned) for the xor operation where alignment is required. Signed-off-by: Herbert Xu --- crypto/cbc.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/crypto/cbc.c b/crypto/cbc.c index b013d6fec1eb..6affff882cf8 100644 --- a/crypto/cbc.c +++ b/crypto/cbc.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -143,17 +144,13 @@ static int crypto_cbc_decrypt_inplace(struct blkcipher_desc *desc, void (*fn)(struct crypto_tfm *, u8 *, const u8 *) = crypto_cipher_alg(tfm)->cia_decrypt; int bsize = crypto_cipher_blocksize(tfm); - unsigned long alignmask = crypto_cipher_alignmask(tfm); unsigned int nbytes = walk->nbytes; u8 *src = walk->src.virt.addr; - u8 stack[bsize + alignmask]; - u8 *first_iv = (u8 *)ALIGN((unsigned long)stack, alignmask + 1); - - memcpy(first_iv, walk->iv, bsize); + u8 last_iv[bsize]; /* Start of the last block. */ - src += nbytes - nbytes % bsize - bsize; - memcpy(walk->iv, src, bsize); + src += nbytes - (nbytes & (bsize - 1)) - bsize; + memcpy(last_iv, src, bsize); for (;;) { fn(crypto_cipher_tfm(tfm), src, src); @@ -163,7 +160,8 @@ static int crypto_cbc_decrypt_inplace(struct blkcipher_desc *desc, src -= bsize; } - crypto_xor(src, first_iv, bsize); + crypto_xor(src, walk->iv, bsize); + memcpy(walk->iv, last_iv, bsize); return nbytes; } @@ -228,6 +226,10 @@ static struct crypto_instance *crypto_cbc_alloc(struct rtattr **tb) if (IS_ERR(alg)) return ERR_PTR(PTR_ERR(alg)); + inst = ERR_PTR(-EINVAL); + if (!is_power_of_2(alg->cra_blocksize)) + goto out_put_alg; + inst = crypto_alloc_instance("cbc", alg); if (IS_ERR(inst)) goto out_put_alg; -- cgit v1.2.3-59-g8ed1b From d0b9007a27206fe944d9db72e13dab157b8e118c Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 20 Nov 2007 17:49:49 +0800 Subject: [CRYPTO] pcbc: Use crypto_xor This patch replaces the custom xor in CBC with the generic crypto_xor. It changes the operations for in-place encryption slightly to avoid calling crypto_xor with tmpbuf since it is not necessarily aligned. Signed-off-by: Herbert Xu --- crypto/pcbc.c | 105 ++++++++++++++-------------------------------------------- 1 file changed, 24 insertions(+), 81 deletions(-) diff --git a/crypto/pcbc.c b/crypto/pcbc.c index c3ed8a1c9f46..fe704775f88f 100644 --- a/crypto/pcbc.c +++ b/crypto/pcbc.c @@ -24,7 +24,6 @@ struct crypto_pcbc_ctx { struct crypto_cipher *child; - void (*xor)(u8 *dst, const u8 *src, unsigned int bs); }; static int crypto_pcbc_setkey(struct crypto_tfm *parent, const u8 *key, @@ -45,9 +44,7 @@ static int crypto_pcbc_setkey(struct crypto_tfm *parent, const u8 *key, static int crypto_pcbc_encrypt_segment(struct blkcipher_desc *desc, struct blkcipher_walk *walk, - struct crypto_cipher *tfm, - void (*xor)(u8 *, const u8 *, - unsigned int)) + struct crypto_cipher *tfm) { void (*fn)(struct crypto_tfm *, u8 *, const u8 *) = crypto_cipher_alg(tfm)->cia_encrypt; @@ -58,10 +55,10 @@ static int crypto_pcbc_encrypt_segment(struct blkcipher_desc *desc, u8 *iv = walk->iv; do { - xor(iv, src, bsize); + crypto_xor(iv, src, bsize); fn(crypto_cipher_tfm(tfm), dst, iv); memcpy(iv, dst, bsize); - xor(iv, src, bsize); + crypto_xor(iv, src, bsize); src += bsize; dst += bsize; @@ -72,9 +69,7 @@ static int crypto_pcbc_encrypt_segment(struct blkcipher_desc *desc, static int crypto_pcbc_encrypt_inplace(struct blkcipher_desc *desc, struct blkcipher_walk *walk, - struct crypto_cipher *tfm, - void (*xor)(u8 *, const u8 *, - unsigned int)) + struct crypto_cipher *tfm) { void (*fn)(struct crypto_tfm *, u8 *, const u8 *) = crypto_cipher_alg(tfm)->cia_encrypt; @@ -86,10 +81,10 @@ static int crypto_pcbc_encrypt_inplace(struct blkcipher_desc *desc, do { memcpy(tmpbuf, src, bsize); - xor(iv, tmpbuf, bsize); + crypto_xor(iv, src, bsize); fn(crypto_cipher_tfm(tfm), src, iv); - memcpy(iv, src, bsize); - xor(iv, tmpbuf, bsize); + memcpy(iv, tmpbuf, bsize); + crypto_xor(iv, src, bsize); src += bsize; } while ((nbytes -= bsize) >= bsize); @@ -107,7 +102,6 @@ static int crypto_pcbc_encrypt(struct blkcipher_desc *desc, struct crypto_blkcipher *tfm = desc->tfm; struct crypto_pcbc_ctx *ctx = crypto_blkcipher_ctx(tfm); struct crypto_cipher *child = ctx->child; - void (*xor)(u8 *, const u8 *, unsigned int bs) = ctx->xor; int err; blkcipher_walk_init(&walk, dst, src, nbytes); @@ -115,11 +109,11 @@ static int crypto_pcbc_encrypt(struct blkcipher_desc *desc, while ((nbytes = walk.nbytes)) { if (walk.src.virt.addr == walk.dst.virt.addr) - nbytes = crypto_pcbc_encrypt_inplace(desc, &walk, child, - xor); + nbytes = crypto_pcbc_encrypt_inplace(desc, &walk, + child); else - nbytes = crypto_pcbc_encrypt_segment(desc, &walk, child, - xor); + nbytes = crypto_pcbc_encrypt_segment(desc, &walk, + child); err = blkcipher_walk_done(desc, &walk, nbytes); } @@ -128,9 +122,7 @@ static int crypto_pcbc_encrypt(struct blkcipher_desc *desc, static int crypto_pcbc_decrypt_segment(struct blkcipher_desc *desc, struct blkcipher_walk *walk, - struct crypto_cipher *tfm, - void (*xor)(u8 *, const u8 *, - unsigned int)) + struct crypto_cipher *tfm) { void (*fn)(struct crypto_tfm *, u8 *, const u8 *) = crypto_cipher_alg(tfm)->cia_decrypt; @@ -142,9 +134,9 @@ static int crypto_pcbc_decrypt_segment(struct blkcipher_desc *desc, do { fn(crypto_cipher_tfm(tfm), dst, src); - xor(dst, iv, bsize); + crypto_xor(dst, iv, bsize); memcpy(iv, src, bsize); - xor(iv, dst, bsize); + crypto_xor(iv, dst, bsize); src += bsize; dst += bsize; @@ -157,9 +149,7 @@ static int crypto_pcbc_decrypt_segment(struct blkcipher_desc *desc, static int crypto_pcbc_decrypt_inplace(struct blkcipher_desc *desc, struct blkcipher_walk *walk, - struct crypto_cipher *tfm, - void (*xor)(u8 *, const u8 *, - unsigned int)) + struct crypto_cipher *tfm) { void (*fn)(struct crypto_tfm *, u8 *, const u8 *) = crypto_cipher_alg(tfm)->cia_decrypt; @@ -172,9 +162,9 @@ static int crypto_pcbc_decrypt_inplace(struct blkcipher_desc *desc, do { memcpy(tmpbuf, src, bsize); fn(crypto_cipher_tfm(tfm), src, src); - xor(src, iv, bsize); + crypto_xor(src, iv, bsize); memcpy(iv, tmpbuf, bsize); - xor(iv, src, bsize); + crypto_xor(iv, src, bsize); src += bsize; } while ((nbytes -= bsize) >= bsize); @@ -192,7 +182,6 @@ static int crypto_pcbc_decrypt(struct blkcipher_desc *desc, struct crypto_blkcipher *tfm = desc->tfm; struct crypto_pcbc_ctx *ctx = crypto_blkcipher_ctx(tfm); struct crypto_cipher *child = ctx->child; - void (*xor)(u8 *, const u8 *, unsigned int bs) = ctx->xor; int err; blkcipher_walk_init(&walk, dst, src, nbytes); @@ -200,48 +189,17 @@ static int crypto_pcbc_decrypt(struct blkcipher_desc *desc, while ((nbytes = walk.nbytes)) { if (walk.src.virt.addr == walk.dst.virt.addr) - nbytes = crypto_pcbc_decrypt_inplace(desc, &walk, child, - xor); + nbytes = crypto_pcbc_decrypt_inplace(desc, &walk, + child); else - nbytes = crypto_pcbc_decrypt_segment(desc, &walk, child, - xor); + nbytes = crypto_pcbc_decrypt_segment(desc, &walk, + child); err = blkcipher_walk_done(desc, &walk, nbytes); } return err; } -static void xor_byte(u8 *a, const u8 *b, unsigned int bs) -{ - do { - *a++ ^= *b++; - } while (--bs); -} - -static void xor_quad(u8 *dst, const u8 *src, unsigned int bs) -{ - u32 *a = (u32 *)dst; - u32 *b = (u32 *)src; - - do { - *a++ ^= *b++; - } while ((bs -= 4)); -} - -static void xor_64(u8 *a, const u8 *b, unsigned int bs) -{ - ((u32 *)a)[0] ^= ((u32 *)b)[0]; - ((u32 *)a)[1] ^= ((u32 *)b)[1]; -} - -static void xor_128(u8 *a, const u8 *b, unsigned int bs) -{ - ((u32 *)a)[0] ^= ((u32 *)b)[0]; - ((u32 *)a)[1] ^= ((u32 *)b)[1]; - ((u32 *)a)[2] ^= ((u32 *)b)[2]; - ((u32 *)a)[3] ^= ((u32 *)b)[3]; -} - static int crypto_pcbc_init_tfm(struct crypto_tfm *tfm) { struct crypto_instance *inst = (void *)tfm->__crt_alg; @@ -249,22 +207,6 @@ static int crypto_pcbc_init_tfm(struct crypto_tfm *tfm) struct crypto_pcbc_ctx *ctx = crypto_tfm_ctx(tfm); struct crypto_cipher *cipher; - switch (crypto_tfm_alg_blocksize(tfm)) { - case 8: - ctx->xor = xor_64; - break; - - case 16: - ctx->xor = xor_128; - break; - - default: - if (crypto_tfm_alg_blocksize(tfm) % 4) - ctx->xor = xor_byte; - else - ctx->xor = xor_quad; - } - cipher = crypto_spawn_cipher(spawn); if (IS_ERR(cipher)) return PTR_ERR(cipher); @@ -304,8 +246,9 @@ static struct crypto_instance *crypto_pcbc_alloc(struct rtattr **tb) inst->alg.cra_alignmask = alg->cra_alignmask; inst->alg.cra_type = &crypto_blkcipher_type; - if (!(alg->cra_blocksize % 4)) - inst->alg.cra_alignmask |= 3; + /* We access the data as u32s when xoring. */ + inst->alg.cra_alignmask |= __alignof__(u32) - 1; + inst->alg.cra_blkcipher.ivsize = alg->cra_blocksize; inst->alg.cra_blkcipher.min_keysize = alg->cra_cipher.cia_min_keysize; inst->alg.cra_blkcipher.max_keysize = alg->cra_cipher.cia_max_keysize; -- cgit v1.2.3-59-g8ed1b From 3f8214ea335e422702340d7e835921e78367f99d Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 20 Nov 2007 20:32:56 +0800 Subject: [CRYPTO] ctr: Use crypto_inc and crypto_xor This patch replaces the custom inc/xor in CTR with the generic functions. Signed-off-by: Herbert Xu --- crypto/ctr.c | 71 ++++++++++++++---------------------------------------------- 1 file changed, 16 insertions(+), 55 deletions(-) diff --git a/crypto/ctr.c b/crypto/ctr.c index b974a9f9b879..b816e959fa55 100644 --- a/crypto/ctr.c +++ b/crypto/ctr.c @@ -31,51 +31,6 @@ struct crypto_ctr_ctx { u8 *nonce; }; -static inline void __ctr_inc_byte(u8 *a, unsigned int size) -{ - u8 *b = (a + size); - u8 c; - - for (; size; size--) { - c = *--b + 1; - *b = c; - if (c) - break; - } -} - -static void ctr_inc_quad(u8 *a, unsigned int size) -{ - __be32 *b = (__be32 *)(a + size); - u32 c; - - for (; size >= 4; size -=4) { - c = be32_to_cpu(*--b) + 1; - *b = cpu_to_be32(c); - if (c) - return; - } - - __ctr_inc_byte(a, size); -} - -static void xor_byte(u8 *a, const u8 *b, unsigned int bs) -{ - for (; bs; bs--) - *a++ ^= *b++; -} - -static void xor_quad(u8 *dst, const u8 *src, unsigned int bs) -{ - u32 *a = (u32 *)dst; - u32 *b = (u32 *)src; - - for (; bs >= 4; bs -= 4) - *a++ ^= *b++; - - xor_byte((u8 *)a, (u8 *)b, bs); -} - static int crypto_ctr_setkey(struct crypto_tfm *parent, const u8 *key, unsigned int keylen) { @@ -111,7 +66,8 @@ static int crypto_ctr_crypt_segment(struct blkcipher_walk *walk, void (*fn)(struct crypto_tfm *, u8 *, const u8 *) = crypto_cipher_alg(tfm)->cia_encrypt; unsigned int bsize = crypto_cipher_blocksize(tfm); - unsigned long alignmask = crypto_cipher_alignmask(tfm); + unsigned long alignmask = crypto_cipher_alignmask(tfm) | + (__alignof__(u32) - 1); u8 ks[bsize + alignmask]; u8 *keystream = (u8 *)ALIGN((unsigned long)ks, alignmask + 1); u8 *src = walk->src.virt.addr; @@ -121,13 +77,13 @@ static int crypto_ctr_crypt_segment(struct blkcipher_walk *walk, do { /* create keystream */ fn(crypto_cipher_tfm(tfm), keystream, ctrblk); - xor_quad(keystream, src, min(nbytes, bsize)); + crypto_xor(keystream, src, min(nbytes, bsize)); /* copy result into dst */ memcpy(dst, keystream, min(nbytes, bsize)); /* increment counter in counterblock */ - ctr_inc_quad(ctrblk + (bsize - countersize), countersize); + crypto_inc(ctrblk + bsize - countersize, countersize); if (nbytes < bsize) break; @@ -148,7 +104,8 @@ static int crypto_ctr_crypt_inplace(struct blkcipher_walk *walk, void (*fn)(struct crypto_tfm *, u8 *, const u8 *) = crypto_cipher_alg(tfm)->cia_encrypt; unsigned int bsize = crypto_cipher_blocksize(tfm); - unsigned long alignmask = crypto_cipher_alignmask(tfm); + unsigned long alignmask = crypto_cipher_alignmask(tfm) | + (__alignof__(u32) - 1); unsigned int nbytes = walk->nbytes; u8 *src = walk->src.virt.addr; u8 ks[bsize + alignmask]; @@ -157,10 +114,10 @@ static int crypto_ctr_crypt_inplace(struct blkcipher_walk *walk, do { /* create keystream */ fn(crypto_cipher_tfm(tfm), keystream, ctrblk); - xor_quad(src, keystream, min(nbytes, bsize)); + crypto_xor(src, keystream, min(nbytes, bsize)); /* increment counter in counterblock */ - ctr_inc_quad(ctrblk + (bsize - countersize), countersize); + crypto_inc(ctrblk + bsize - countersize, countersize); if (nbytes < bsize) break; @@ -184,7 +141,8 @@ static int crypto_ctr_crypt(struct blkcipher_desc *desc, unsigned int bsize = crypto_cipher_blocksize(child); struct ctr_instance_ctx *ictx = crypto_instance_ctx(crypto_tfm_alg_instance(&tfm->base)); - unsigned long alignmask = crypto_cipher_alignmask(child); + unsigned long alignmask = crypto_cipher_alignmask(child) | + (__alignof__(u32) - 1); u8 cblk[bsize + alignmask]; u8 *counterblk = (u8 *)ALIGN((unsigned long)cblk, alignmask + 1); int err; @@ -198,8 +156,7 @@ static int crypto_ctr_crypt(struct blkcipher_desc *desc, memcpy(counterblk + ictx->noncesize, walk.iv, ictx->ivsize); /* initialize counter portion of counter block */ - ctr_inc_quad(counterblk + (bsize - ictx->countersize), - ictx->countersize); + crypto_inc(counterblk + bsize - ictx->countersize, ictx->countersize); while (walk.nbytes) { if (walk.src.virt.addr == walk.dst.virt.addr) @@ -284,6 +241,10 @@ static struct crypto_instance *crypto_ctr_alloc(struct rtattr **tb) (countersize > alg->cra_blocksize) || (countersize < 4)) goto out_put_alg; + /* If this is false we'd fail the alignment of crypto_inc. */ + if ((alg->cra_blocksize - countersize) % 4) + goto out_put_alg; + inst = kzalloc(sizeof(*inst) + sizeof(*ictx), GFP_KERNEL); err = -ENOMEM; if (!inst) @@ -316,7 +277,7 @@ static struct crypto_instance *crypto_ctr_alloc(struct rtattr **tb) inst->alg.cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER; inst->alg.cra_priority = alg->cra_priority; inst->alg.cra_blocksize = 1; - inst->alg.cra_alignmask = 3; + inst->alg.cra_alignmask = __alignof__(u32) - 1; inst->alg.cra_type = &crypto_blkcipher_type; inst->alg.cra_blkcipher.ivsize = ivsize; -- cgit v1.2.3-59-g8ed1b From 2ddae4a64491f790799e2adbfaec72a23dc2e7ef Mon Sep 17 00:00:00 2001 From: Denys Vlasenko Date: Fri, 23 Nov 2007 21:05:55 +0800 Subject: [CRYPTO] camellia: Code shrink Remove unused macro params. Use (u8)(expr) instead of (expr) & 0xff, helps gcc to realize how to use simpler commands. Move CAMELLIA_FLS macro closer to encrypt/decrypt routines. Signed-off-by: Denys Vlasenko Signed-off-by: Herbert Xu --- crypto/camellia.c | 269 +++++++++++++++++++++++++++--------------------------- 1 file changed, 135 insertions(+), 134 deletions(-) diff --git a/crypto/camellia.c b/crypto/camellia.c index 2e129ab1a6a2..9b1f068e45cc 100644 --- a/crypto/camellia.c +++ b/crypto/camellia.c @@ -310,6 +310,12 @@ static const u32 camellia_sp4404[256] = { #define CAMELLIA_BLOCK_SIZE 16 #define CAMELLIA_TABLE_BYTE_LEN 272 +/* + * NB: L and R below stand for 'left' and 'right' as in written numbers. + * That is, in (xxxL,xxxR) pair xxxL holds most significant digits, + * _not_ least significant ones! + */ + /* key constants */ @@ -329,8 +335,7 @@ static const u32 camellia_sp4404[256] = { /* * macros */ - -# define GETU32(v, pt) \ +#define GETU32(v, pt) \ do { \ /* latest breed of gcc is clever enough to use move */ \ memcpy(&(v), (pt), 4); \ @@ -363,64 +368,25 @@ static const u32 camellia_sp4404[256] = { rr = (w0 << (bits - 32)) + (w1 >> (64 - bits)); \ } while(0) - #define CAMELLIA_F(xl, xr, kl, kr, yl, yr, il, ir, t0, t1) \ do { \ il = xl ^ kl; \ ir = xr ^ kr; \ t0 = il >> 16; \ t1 = ir >> 16; \ - yl = camellia_sp1110[ir & 0xff] \ - ^ camellia_sp0222[(t1 >> 8) & 0xff] \ - ^ camellia_sp3033[t1 & 0xff] \ - ^ camellia_sp4404[(ir >> 8) & 0xff]; \ - yr = camellia_sp1110[(t0 >> 8) & 0xff] \ - ^ camellia_sp0222[t0 & 0xff] \ - ^ camellia_sp3033[(il >> 8) & 0xff] \ - ^ camellia_sp4404[il & 0xff]; \ + yl = camellia_sp1110[(u8)(ir )] \ + ^ camellia_sp0222[ (t1 >> 8)] \ + ^ camellia_sp3033[(u8)(t1 )] \ + ^ camellia_sp4404[(u8)(ir >> 8)]; \ + yr = camellia_sp1110[ (t0 >> 8)] \ + ^ camellia_sp0222[(u8)(t0 )] \ + ^ camellia_sp3033[(u8)(il >> 8)] \ + ^ camellia_sp4404[(u8)(il )]; \ yl ^= yr; \ yr = ROR8(yr); \ yr ^= yl; \ } while(0) - -/* - * for speed up - * - */ -#define CAMELLIA_FLS(ll, lr, rl, rr, kll, klr, krl, krr, t0, t1, t2, t3) \ - do { \ - t0 = kll; \ - t2 = krr; \ - t0 &= ll; \ - t2 |= rr; \ - rl ^= t2; \ - lr ^= ROL1(t0); \ - t3 = krl; \ - t1 = klr; \ - t3 &= rl; \ - t1 |= lr; \ - ll ^= t1; \ - rr ^= ROL1(t3); \ - } while(0) - -#define CAMELLIA_ROUNDSM(xl, xr, kl, kr, yl, yr, il, ir, t0, t1) \ - do { \ - ir = camellia_sp1110[xr & 0xff]; \ - il = camellia_sp1110[(xl>>24) & 0xff]; \ - ir ^= camellia_sp0222[(xr>>24) & 0xff]; \ - il ^= camellia_sp0222[(xl>>16) & 0xff]; \ - ir ^= camellia_sp3033[(xr>>16) & 0xff]; \ - il ^= camellia_sp3033[(xl>>8) & 0xff]; \ - ir ^= camellia_sp4404[(xr>>8) & 0xff]; \ - il ^= camellia_sp4404[xl & 0xff]; \ - il ^= kl; \ - ir ^= il ^ kr; \ - yl ^= ir; \ - yr ^= ROR8(il) ^ ir; \ - } while(0) - - #define SUBKEY_L(INDEX) (subkey[(INDEX)*2]) #define SUBKEY_R(INDEX) (subkey[(INDEX)*2 + 1]) @@ -1000,6 +966,41 @@ static void camellia_setup192(const unsigned char *key, u32 *subkey) } +/* + * Encrypt/decrypt + */ +#define CAMELLIA_FLS(ll, lr, rl, rr, kll, klr, krl, krr, t0, t1, t2, t3) \ + do { \ + t0 = kll; \ + t2 = krr; \ + t0 &= ll; \ + t2 |= rr; \ + rl ^= t2; \ + lr ^= ROL1(t0); \ + t3 = krl; \ + t1 = klr; \ + t3 &= rl; \ + t1 |= lr; \ + ll ^= t1; \ + rr ^= ROL1(t3); \ + } while(0) + +#define CAMELLIA_ROUNDSM(xl, xr, kl, kr, yl, yr, il, ir) \ + do { \ + ir = camellia_sp1110[(u8)xr]; \ + il = camellia_sp1110[ (xl >> 24)]; \ + ir ^= camellia_sp0222[ (xr >> 24)]; \ + il ^= camellia_sp0222[(u8)(xl >> 16)]; \ + ir ^= camellia_sp3033[(u8)(xr >> 16)]; \ + il ^= camellia_sp3033[(u8)(xl >> 8)]; \ + ir ^= camellia_sp4404[(u8)(xr >> 8)]; \ + il ^= camellia_sp4404[(u8)xl]; \ + il ^= kl; \ + ir ^= il ^ kr; \ + yl ^= ir; \ + yr ^= ROR8(il) ^ ir; \ + } while(0) + static void camellia_encrypt128(const u32 *subkey, u32 *io_text) { u32 il,ir,t0,t1; /* temporary variables */ @@ -1015,22 +1016,22 @@ static void camellia_encrypt128(const u32 *subkey, u32 *io_text) /* main iteration */ CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(2),SUBKEY_R(2), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(3),SUBKEY_R(3), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(4),SUBKEY_R(4), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(5),SUBKEY_R(5), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(6),SUBKEY_R(6), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(7),SUBKEY_R(7), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_FLS(io[0],io[1],io[2],io[3], SUBKEY_L(8),SUBKEY_R(8), @@ -1039,22 +1040,22 @@ static void camellia_encrypt128(const u32 *subkey, u32 *io_text) CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(10),SUBKEY_R(10), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(11),SUBKEY_R(11), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(12),SUBKEY_R(12), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(13),SUBKEY_R(13), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(14),SUBKEY_R(14), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(15),SUBKEY_R(15), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_FLS(io[0],io[1],io[2],io[3], SUBKEY_L(16),SUBKEY_R(16), @@ -1063,22 +1064,22 @@ static void camellia_encrypt128(const u32 *subkey, u32 *io_text) CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(18),SUBKEY_R(18), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(19),SUBKEY_R(19), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(20),SUBKEY_R(20), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(21),SUBKEY_R(21), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(22),SUBKEY_R(22), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(23),SUBKEY_R(23), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); /* post whitening but kw4 */ io_text[0] = io[2] ^ SUBKEY_L(24); @@ -1102,22 +1103,22 @@ static void camellia_decrypt128(const u32 *subkey, u32 *io_text) /* main iteration */ CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(23),SUBKEY_R(23), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(22),SUBKEY_R(22), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(21),SUBKEY_R(21), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(20),SUBKEY_R(20), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(19),SUBKEY_R(19), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(18),SUBKEY_R(18), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_FLS(io[0],io[1],io[2],io[3], SUBKEY_L(17),SUBKEY_R(17), @@ -1126,22 +1127,22 @@ static void camellia_decrypt128(const u32 *subkey, u32 *io_text) CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(15),SUBKEY_R(15), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(14),SUBKEY_R(14), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(13),SUBKEY_R(13), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(12),SUBKEY_R(12), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(11),SUBKEY_R(11), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(10),SUBKEY_R(10), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_FLS(io[0],io[1],io[2],io[3], SUBKEY_L(9),SUBKEY_R(9), @@ -1150,22 +1151,22 @@ static void camellia_decrypt128(const u32 *subkey, u32 *io_text) CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(7),SUBKEY_R(7), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(6),SUBKEY_R(6), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(5),SUBKEY_R(5), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(4),SUBKEY_R(4), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(3),SUBKEY_R(3), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(2),SUBKEY_R(2), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); /* post whitening but kw4 */ io_text[0] = io[2] ^ SUBKEY_L(0); @@ -1189,22 +1190,22 @@ static void camellia_encrypt256(const u32 *subkey, u32 *io_text) /* main iteration */ CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(2),SUBKEY_R(2), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(3),SUBKEY_R(3), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(4),SUBKEY_R(4), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(5),SUBKEY_R(5), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(6),SUBKEY_R(6), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(7),SUBKEY_R(7), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_FLS(io[0],io[1],io[2],io[3], SUBKEY_L(8),SUBKEY_R(8), @@ -1213,22 +1214,22 @@ static void camellia_encrypt256(const u32 *subkey, u32 *io_text) CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(10),SUBKEY_R(10), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(11),SUBKEY_R(11), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(12),SUBKEY_R(12), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(13),SUBKEY_R(13), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(14),SUBKEY_R(14), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(15),SUBKEY_R(15), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_FLS(io[0],io[1],io[2],io[3], SUBKEY_L(16),SUBKEY_R(16), @@ -1237,22 +1238,22 @@ static void camellia_encrypt256(const u32 *subkey, u32 *io_text) CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(18),SUBKEY_R(18), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(19),SUBKEY_R(19), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(20),SUBKEY_R(20), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(21),SUBKEY_R(21), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(22),SUBKEY_R(22), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(23),SUBKEY_R(23), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_FLS(io[0],io[1],io[2],io[3], SUBKEY_L(24),SUBKEY_R(24), @@ -1261,22 +1262,22 @@ static void camellia_encrypt256(const u32 *subkey, u32 *io_text) CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(26),SUBKEY_R(26), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(27),SUBKEY_R(27), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(28),SUBKEY_R(28), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(29),SUBKEY_R(29), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(30),SUBKEY_R(30), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(31),SUBKEY_R(31), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); /* post whitening but kw4 */ io_text[0] = io[2] ^ SUBKEY_L(32); @@ -1300,22 +1301,22 @@ static void camellia_decrypt256(const u32 *subkey, u32 *io_text) /* main iteration */ CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(31),SUBKEY_R(31), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(30),SUBKEY_R(30), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(29),SUBKEY_R(29), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(28),SUBKEY_R(28), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(27),SUBKEY_R(27), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(26),SUBKEY_R(26), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_FLS(io[0],io[1],io[2],io[3], SUBKEY_L(25),SUBKEY_R(25), @@ -1324,22 +1325,22 @@ static void camellia_decrypt256(const u32 *subkey, u32 *io_text) CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(23),SUBKEY_R(23), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(22),SUBKEY_R(22), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(21),SUBKEY_R(21), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(20),SUBKEY_R(20), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(19),SUBKEY_R(19), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(18),SUBKEY_R(18), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_FLS(io[0],io[1],io[2],io[3], SUBKEY_L(17),SUBKEY_R(17), @@ -1348,22 +1349,22 @@ static void camellia_decrypt256(const u32 *subkey, u32 *io_text) CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(15),SUBKEY_R(15), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(14),SUBKEY_R(14), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(13),SUBKEY_R(13), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(12),SUBKEY_R(12), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(11),SUBKEY_R(11), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(10),SUBKEY_R(10), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_FLS(io[0],io[1],io[2],io[3], SUBKEY_L(9),SUBKEY_R(9), @@ -1372,22 +1373,22 @@ static void camellia_decrypt256(const u32 *subkey, u32 *io_text) CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(7),SUBKEY_R(7), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(6),SUBKEY_R(6), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(5),SUBKEY_R(5), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(4),SUBKEY_R(4), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); CAMELLIA_ROUNDSM(io[0],io[1], SUBKEY_L(3),SUBKEY_R(3), - io[2],io[3],il,ir,t0,t1); + io[2],io[3],il,ir); CAMELLIA_ROUNDSM(io[2],io[3], SUBKEY_L(2),SUBKEY_R(2), - io[0],io[1],il,ir,t0,t1); + io[0],io[1],il,ir); /* post whitening but kw4 */ io_text[0] = io[2] ^ SUBKEY_L(0); @@ -1399,7 +1400,7 @@ static void camellia_decrypt256(const u32 *subkey, u32 *io_text) struct camellia_ctx { int key_length; - u32 key_table[CAMELLIA_TABLE_BYTE_LEN / 4]; + u32 key_table[CAMELLIA_TABLE_BYTE_LEN / sizeof(u32)]; }; static int -- cgit v1.2.3-59-g8ed1b From acca79a664859e3ddaea87af86d4ccfb2e07cd65 Mon Sep 17 00:00:00 2001 From: Denys Vlasenko Date: Fri, 23 Nov 2007 21:10:03 +0800 Subject: [CRYPTO] camellia: Merge encrypt/decrypt routines for all key lengths unifies encrypt/decrypt routines for different key lengths. This reduces module size by ~25%, with tiny (less than 1%) speed impact. Also collapses encrypt/decrypt into more readable (visually shorter) form using macros. Signed-off-by: Denys Vlasenko Signed-off-by: Herbert Xu --- crypto/camellia.c | 509 ++++++++++++------------------------------------------ 1 file changed, 106 insertions(+), 403 deletions(-) diff --git a/crypto/camellia.c b/crypto/camellia.c index 9b1f068e45cc..0534e6b7a1aa 100644 --- a/crypto/camellia.c +++ b/crypto/camellia.c @@ -1001,400 +1001,115 @@ static void camellia_setup192(const unsigned char *key, u32 *subkey) yr ^= ROR8(il) ^ ir; \ } while(0) -static void camellia_encrypt128(const u32 *subkey, u32 *io_text) +/* max = 24: 128bit encrypt, max = 32: 256bit encrypt */ +static void camellia_do_encrypt(const u32 *subkey, u32 *io, unsigned max) { u32 il,ir,t0,t1; /* temporary variables */ - u32 io[4]; - /* pre whitening but absorb kw2 */ - io[0] = io_text[0] ^ SUBKEY_L(0); - io[1] = io_text[1] ^ SUBKEY_R(0); - io[2] = io_text[2]; - io[3] = io_text[3]; + io[0] ^= SUBKEY_L(0); + io[1] ^= SUBKEY_R(0); /* main iteration */ - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(2),SUBKEY_R(2), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(3),SUBKEY_R(3), - io[0],io[1],il,ir); - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(4),SUBKEY_R(4), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(5),SUBKEY_R(5), - io[0],io[1],il,ir); - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(6),SUBKEY_R(6), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(7),SUBKEY_R(7), - io[0],io[1],il,ir); - - CAMELLIA_FLS(io[0],io[1],io[2],io[3], - SUBKEY_L(8),SUBKEY_R(8), - SUBKEY_L(9),SUBKEY_R(9), - t0,t1,il,ir); - - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(10),SUBKEY_R(10), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(11),SUBKEY_R(11), - io[0],io[1],il,ir); - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(12),SUBKEY_R(12), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(13),SUBKEY_R(13), - io[0],io[1],il,ir); - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(14),SUBKEY_R(14), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(15),SUBKEY_R(15), - io[0],io[1],il,ir); - - CAMELLIA_FLS(io[0],io[1],io[2],io[3], - SUBKEY_L(16),SUBKEY_R(16), - SUBKEY_L(17),SUBKEY_R(17), - t0,t1,il,ir); - - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(18),SUBKEY_R(18), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(19),SUBKEY_R(19), - io[0],io[1],il,ir); - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(20),SUBKEY_R(20), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(21),SUBKEY_R(21), - io[0],io[1],il,ir); - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(22),SUBKEY_R(22), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(23),SUBKEY_R(23), - io[0],io[1],il,ir); - - /* post whitening but kw4 */ - io_text[0] = io[2] ^ SUBKEY_L(24); - io_text[1] = io[3] ^ SUBKEY_R(24); - io_text[2] = io[0]; - io_text[3] = io[1]; -} - -static void camellia_decrypt128(const u32 *subkey, u32 *io_text) -{ - u32 il,ir,t0,t1; /* temporary variables */ - - u32 io[4]; - - /* pre whitening but absorb kw2 */ - io[0] = io_text[0] ^ SUBKEY_L(24); - io[1] = io_text[1] ^ SUBKEY_R(24); - io[2] = io_text[2]; - io[3] = io_text[3]; +#define ROUNDS(i) do { \ + CAMELLIA_ROUNDSM(io[0],io[1], \ + SUBKEY_L(i + 2),SUBKEY_R(i + 2), \ + io[2],io[3],il,ir); \ + CAMELLIA_ROUNDSM(io[2],io[3], \ + SUBKEY_L(i + 3),SUBKEY_R(i + 3), \ + io[0],io[1],il,ir); \ + CAMELLIA_ROUNDSM(io[0],io[1], \ + SUBKEY_L(i + 4),SUBKEY_R(i + 4), \ + io[2],io[3],il,ir); \ + CAMELLIA_ROUNDSM(io[2],io[3], \ + SUBKEY_L(i + 5),SUBKEY_R(i + 5), \ + io[0],io[1],il,ir); \ + CAMELLIA_ROUNDSM(io[0],io[1], \ + SUBKEY_L(i + 6),SUBKEY_R(i + 6), \ + io[2],io[3],il,ir); \ + CAMELLIA_ROUNDSM(io[2],io[3], \ + SUBKEY_L(i + 7),SUBKEY_R(i + 7), \ + io[0],io[1],il,ir); \ +} while (0) +#define FLS(i) do { \ + CAMELLIA_FLS(io[0],io[1],io[2],io[3], \ + SUBKEY_L(i + 0),SUBKEY_R(i + 0), \ + SUBKEY_L(i + 1),SUBKEY_R(i + 1), \ + t0,t1,il,ir); \ +} while (0) + + ROUNDS(0); + FLS(8); + ROUNDS(8); + FLS(16); + ROUNDS(16); + if (max == 32) { + FLS(24); + ROUNDS(24); + } - /* main iteration */ - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(23),SUBKEY_R(23), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(22),SUBKEY_R(22), - io[0],io[1],il,ir); - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(21),SUBKEY_R(21), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(20),SUBKEY_R(20), - io[0],io[1],il,ir); - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(19),SUBKEY_R(19), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(18),SUBKEY_R(18), - io[0],io[1],il,ir); - - CAMELLIA_FLS(io[0],io[1],io[2],io[3], - SUBKEY_L(17),SUBKEY_R(17), - SUBKEY_L(16),SUBKEY_R(16), - t0,t1,il,ir); - - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(15),SUBKEY_R(15), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(14),SUBKEY_R(14), - io[0],io[1],il,ir); - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(13),SUBKEY_R(13), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(12),SUBKEY_R(12), - io[0],io[1],il,ir); - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(11),SUBKEY_R(11), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(10),SUBKEY_R(10), - io[0],io[1],il,ir); - - CAMELLIA_FLS(io[0],io[1],io[2],io[3], - SUBKEY_L(9),SUBKEY_R(9), - SUBKEY_L(8),SUBKEY_R(8), - t0,t1,il,ir); - - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(7),SUBKEY_R(7), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(6),SUBKEY_R(6), - io[0],io[1],il,ir); - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(5),SUBKEY_R(5), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(4),SUBKEY_R(4), - io[0],io[1],il,ir); - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(3),SUBKEY_R(3), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(2),SUBKEY_R(2), - io[0],io[1],il,ir); +#undef ROUNDS +#undef FLS /* post whitening but kw4 */ - io_text[0] = io[2] ^ SUBKEY_L(0); - io_text[1] = io[3] ^ SUBKEY_R(0); - io_text[2] = io[0]; - io_text[3] = io[1]; + io[2] ^= SUBKEY_L(max); + io[3] ^= SUBKEY_R(max); + /* NB: io[0],[1] should be swapped with [2],[3] by caller! */ } -static void camellia_encrypt256(const u32 *subkey, u32 *io_text) +static void camellia_do_decrypt(const u32 *subkey, u32 *io, unsigned i) { - u32 il,ir,t0,t1; /* temporary variables */ - - u32 io[4]; + u32 il,ir,t0,t1; /* temporary variables */ /* pre whitening but absorb kw2 */ - io[0] = io_text[0] ^ SUBKEY_L(0); - io[1] = io_text[1] ^ SUBKEY_R(0); - io[2] = io_text[2]; - io[3] = io_text[3]; + io[0] ^= SUBKEY_L(i); + io[1] ^= SUBKEY_R(i); /* main iteration */ - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(2),SUBKEY_R(2), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(3),SUBKEY_R(3), - io[0],io[1],il,ir); - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(4),SUBKEY_R(4), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(5),SUBKEY_R(5), - io[0],io[1],il,ir); - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(6),SUBKEY_R(6), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(7),SUBKEY_R(7), - io[0],io[1],il,ir); - - CAMELLIA_FLS(io[0],io[1],io[2],io[3], - SUBKEY_L(8),SUBKEY_R(8), - SUBKEY_L(9),SUBKEY_R(9), - t0,t1,il,ir); - - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(10),SUBKEY_R(10), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(11),SUBKEY_R(11), - io[0],io[1],il,ir); - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(12),SUBKEY_R(12), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(13),SUBKEY_R(13), - io[0],io[1],il,ir); - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(14),SUBKEY_R(14), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(15),SUBKEY_R(15), - io[0],io[1],il,ir); - - CAMELLIA_FLS(io[0],io[1],io[2],io[3], - SUBKEY_L(16),SUBKEY_R(16), - SUBKEY_L(17),SUBKEY_R(17), - t0,t1,il,ir); - - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(18),SUBKEY_R(18), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(19),SUBKEY_R(19), - io[0],io[1],il,ir); - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(20),SUBKEY_R(20), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(21),SUBKEY_R(21), - io[0],io[1],il,ir); - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(22),SUBKEY_R(22), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(23),SUBKEY_R(23), - io[0],io[1],il,ir); - - CAMELLIA_FLS(io[0],io[1],io[2],io[3], - SUBKEY_L(24),SUBKEY_R(24), - SUBKEY_L(25),SUBKEY_R(25), - t0,t1,il,ir); - - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(26),SUBKEY_R(26), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(27),SUBKEY_R(27), - io[0],io[1],il,ir); - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(28),SUBKEY_R(28), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(29),SUBKEY_R(29), - io[0],io[1],il,ir); - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(30),SUBKEY_R(30), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(31),SUBKEY_R(31), - io[0],io[1],il,ir); - - /* post whitening but kw4 */ - io_text[0] = io[2] ^ SUBKEY_L(32); - io_text[1] = io[3] ^ SUBKEY_R(32); - io_text[2] = io[0]; - io_text[3] = io[1]; -} - -static void camellia_decrypt256(const u32 *subkey, u32 *io_text) -{ - u32 il,ir,t0,t1; /* temporary variables */ +#define ROUNDS(i) do { \ + CAMELLIA_ROUNDSM(io[0],io[1], \ + SUBKEY_L(i + 7),SUBKEY_R(i + 7), \ + io[2],io[3],il,ir); \ + CAMELLIA_ROUNDSM(io[2],io[3], \ + SUBKEY_L(i + 6),SUBKEY_R(i + 6), \ + io[0],io[1],il,ir); \ + CAMELLIA_ROUNDSM(io[0],io[1], \ + SUBKEY_L(i + 5),SUBKEY_R(i + 5), \ + io[2],io[3],il,ir); \ + CAMELLIA_ROUNDSM(io[2],io[3], \ + SUBKEY_L(i + 4),SUBKEY_R(i + 4), \ + io[0],io[1],il,ir); \ + CAMELLIA_ROUNDSM(io[0],io[1], \ + SUBKEY_L(i + 3),SUBKEY_R(i + 3), \ + io[2],io[3],il,ir); \ + CAMELLIA_ROUNDSM(io[2],io[3], \ + SUBKEY_L(i + 2),SUBKEY_R(i + 2), \ + io[0],io[1],il,ir); \ +} while (0) +#define FLS(i) do { \ + CAMELLIA_FLS(io[0],io[1],io[2],io[3], \ + SUBKEY_L(i + 1),SUBKEY_R(i + 1), \ + SUBKEY_L(i + 0),SUBKEY_R(i + 0), \ + t0,t1,il,ir); \ +} while (0) + + if (i == 32) { + ROUNDS(24); + FLS(24); + } + ROUNDS(16); + FLS(16); + ROUNDS(8); + FLS(8); + ROUNDS(0); - u32 io[4]; - - /* pre whitening but absorb kw2 */ - io[0] = io_text[0] ^ SUBKEY_L(32); - io[1] = io_text[1] ^ SUBKEY_R(32); - io[2] = io_text[2]; - io[3] = io_text[3]; - - /* main iteration */ - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(31),SUBKEY_R(31), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(30),SUBKEY_R(30), - io[0],io[1],il,ir); - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(29),SUBKEY_R(29), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(28),SUBKEY_R(28), - io[0],io[1],il,ir); - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(27),SUBKEY_R(27), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(26),SUBKEY_R(26), - io[0],io[1],il,ir); - - CAMELLIA_FLS(io[0],io[1],io[2],io[3], - SUBKEY_L(25),SUBKEY_R(25), - SUBKEY_L(24),SUBKEY_R(24), - t0,t1,il,ir); - - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(23),SUBKEY_R(23), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(22),SUBKEY_R(22), - io[0],io[1],il,ir); - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(21),SUBKEY_R(21), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(20),SUBKEY_R(20), - io[0],io[1],il,ir); - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(19),SUBKEY_R(19), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(18),SUBKEY_R(18), - io[0],io[1],il,ir); - - CAMELLIA_FLS(io[0],io[1],io[2],io[3], - SUBKEY_L(17),SUBKEY_R(17), - SUBKEY_L(16),SUBKEY_R(16), - t0,t1,il,ir); - - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(15),SUBKEY_R(15), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(14),SUBKEY_R(14), - io[0],io[1],il,ir); - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(13),SUBKEY_R(13), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(12),SUBKEY_R(12), - io[0],io[1],il,ir); - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(11),SUBKEY_R(11), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(10),SUBKEY_R(10), - io[0],io[1],il,ir); - - CAMELLIA_FLS(io[0],io[1],io[2],io[3], - SUBKEY_L(9),SUBKEY_R(9), - SUBKEY_L(8),SUBKEY_R(8), - t0,t1,il,ir); - - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(7),SUBKEY_R(7), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(6),SUBKEY_R(6), - io[0],io[1],il,ir); - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(5),SUBKEY_R(5), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(4),SUBKEY_R(4), - io[0],io[1],il,ir); - CAMELLIA_ROUNDSM(io[0],io[1], - SUBKEY_L(3),SUBKEY_R(3), - io[2],io[3],il,ir); - CAMELLIA_ROUNDSM(io[2],io[3], - SUBKEY_L(2),SUBKEY_R(2), - io[0],io[1],il,ir); +#undef ROUNDS +#undef FLS /* post whitening but kw4 */ - io_text[0] = io[2] ^ SUBKEY_L(0); - io_text[1] = io[3] ^ SUBKEY_R(0); - io_text[2] = io[0]; - io_text[3] = io[1]; + io[2] ^= SUBKEY_L(0); + io[3] ^= SUBKEY_R(0); + /* NB: 0,1 should be swapped with 2,3 by caller! */ } @@ -1446,21 +1161,15 @@ static void camellia_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) tmp[2] = be32_to_cpu(src[2]); tmp[3] = be32_to_cpu(src[3]); - switch (cctx->key_length) { - case 16: - camellia_encrypt128(cctx->key_table, tmp); - break; - case 24: - /* fall through */ - case 32: - camellia_encrypt256(cctx->key_table, tmp); - break; - } + camellia_do_encrypt(cctx->key_table, tmp, + cctx->key_length == 16 ? 24 : 32 /* for key lengths of 24 and 32 */ + ); - dst[0] = cpu_to_be32(tmp[0]); - dst[1] = cpu_to_be32(tmp[1]); - dst[2] = cpu_to_be32(tmp[2]); - dst[3] = cpu_to_be32(tmp[3]); + /* do_encrypt returns 0,1 swapped with 2,3 */ + dst[0] = cpu_to_be32(tmp[2]); + dst[1] = cpu_to_be32(tmp[3]); + dst[2] = cpu_to_be32(tmp[0]); + dst[3] = cpu_to_be32(tmp[1]); } static void camellia_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) @@ -1476,21 +1185,15 @@ static void camellia_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) tmp[2] = be32_to_cpu(src[2]); tmp[3] = be32_to_cpu(src[3]); - switch (cctx->key_length) { - case 16: - camellia_decrypt128(cctx->key_table, tmp); - break; - case 24: - /* fall through */ - case 32: - camellia_decrypt256(cctx->key_table, tmp); - break; - } + camellia_do_decrypt(cctx->key_table, tmp, + cctx->key_length == 16 ? 24 : 32 /* for key lengths of 24 and 32 */ + ); - dst[0] = cpu_to_be32(tmp[0]); - dst[1] = cpu_to_be32(tmp[1]); - dst[2] = cpu_to_be32(tmp[2]); - dst[3] = cpu_to_be32(tmp[3]); + /* do_decrypt returns 0,1 swapped with 2,3 */ + dst[0] = cpu_to_be32(tmp[2]); + dst[1] = cpu_to_be32(tmp[3]); + dst[2] = cpu_to_be32(tmp[0]); + dst[3] = cpu_to_be32(tmp[1]); } static struct crypto_alg camellia_alg = { -- cgit v1.2.3-59-g8ed1b From dedcf8b0647572ca00547efef58dfab6b8dddf83 Mon Sep 17 00:00:00 2001 From: Denys Vlasenko Date: Fri, 23 Nov 2007 21:14:24 +0800 Subject: [CRYPTO] camellia: Move common code into camellia_setup_tail Move "key XOR is end of F-function" code part into camellia_setup_tail(), it is sufficiently similar between camellia_setup128 and camellia_setup256. Signed-off-by: Denys Vlasenko Signed-off-by: Herbert Xu --- crypto/camellia.c | 264 +++++++++++++++++++++--------------------------------- 1 file changed, 104 insertions(+), 160 deletions(-) diff --git a/crypto/camellia.c b/crypto/camellia.c index 0534e6b7a1aa..86af42e92916 100644 --- a/crypto/camellia.c +++ b/crypto/camellia.c @@ -390,10 +390,104 @@ static const u32 camellia_sp4404[256] = { #define SUBKEY_L(INDEX) (subkey[(INDEX)*2]) #define SUBKEY_R(INDEX) (subkey[(INDEX)*2 + 1]) -static void camellia_setup_tail(u32 *subkey, int max) +static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max) { - u32 dw; - int i = 2; + u32 dw, tl, tr; + int i; + + /* key XOR is end of F-function */ + SUBKEY_L(0) = subL[0] ^ subL[2];/* kw1 */ + SUBKEY_R(0) = subR[0] ^ subR[2]; + SUBKEY_L(2) = subL[3]; /* round 1 */ + SUBKEY_R(2) = subR[3]; + SUBKEY_L(3) = subL[2] ^ subL[4]; /* round 2 */ + SUBKEY_R(3) = subR[2] ^ subR[4]; + SUBKEY_L(4) = subL[3] ^ subL[5]; /* round 3 */ + SUBKEY_R(4) = subR[3] ^ subR[5]; + SUBKEY_L(5) = subL[4] ^ subL[6]; /* round 4 */ + SUBKEY_R(5) = subR[4] ^ subR[6]; + SUBKEY_L(6) = subL[5] ^ subL[7]; /* round 5 */ + SUBKEY_R(6) = subR[5] ^ subR[7]; + tl = subL[10] ^ (subR[10] & ~subR[8]); + dw = tl & subL[8], /* FL(kl1) */ + tr = subR[10] ^ ROL1(dw); + SUBKEY_L(7) = subL[6] ^ tl; /* round 6 */ + SUBKEY_R(7) = subR[6] ^ tr; + SUBKEY_L(8) = subL[8]; /* FL(kl1) */ + SUBKEY_R(8) = subR[8]; + SUBKEY_L(9) = subL[9]; /* FLinv(kl2) */ + SUBKEY_R(9) = subR[9]; + tl = subL[7] ^ (subR[7] & ~subR[9]); + dw = tl & subL[9], /* FLinv(kl2) */ + tr = subR[7] ^ ROL1(dw); + SUBKEY_L(10) = tl ^ subL[11]; /* round 7 */ + SUBKEY_R(10) = tr ^ subR[11]; + SUBKEY_L(11) = subL[10] ^ subL[12]; /* round 8 */ + SUBKEY_R(11) = subR[10] ^ subR[12]; + SUBKEY_L(12) = subL[11] ^ subL[13]; /* round 9 */ + SUBKEY_R(12) = subR[11] ^ subR[13]; + SUBKEY_L(13) = subL[12] ^ subL[14]; /* round 10 */ + SUBKEY_R(13) = subR[12] ^ subR[14]; + SUBKEY_L(14) = subL[13] ^ subL[15]; /* round 11 */ + SUBKEY_R(14) = subR[13] ^ subR[15]; + tl = subL[18] ^ (subR[18] & ~subR[16]); + dw = tl & subL[16], /* FL(kl3) */ + tr = subR[18] ^ ROL1(dw); + SUBKEY_L(15) = subL[14] ^ tl; /* round 12 */ + SUBKEY_R(15) = subR[14] ^ tr; + SUBKEY_L(16) = subL[16]; /* FL(kl3) */ + SUBKEY_R(16) = subR[16]; + SUBKEY_L(17) = subL[17]; /* FLinv(kl4) */ + SUBKEY_R(17) = subR[17]; + tl = subL[15] ^ (subR[15] & ~subR[17]); + dw = tl & subL[17], /* FLinv(kl4) */ + tr = subR[15] ^ ROL1(dw); + SUBKEY_L(18) = tl ^ subL[19]; /* round 13 */ + SUBKEY_R(18) = tr ^ subR[19]; + SUBKEY_L(19) = subL[18] ^ subL[20]; /* round 14 */ + SUBKEY_R(19) = subR[18] ^ subR[20]; + SUBKEY_L(20) = subL[19] ^ subL[21]; /* round 15 */ + SUBKEY_R(20) = subR[19] ^ subR[21]; + SUBKEY_L(21) = subL[20] ^ subL[22]; /* round 16 */ + SUBKEY_R(21) = subR[20] ^ subR[22]; + SUBKEY_L(22) = subL[21] ^ subL[23]; /* round 17 */ + SUBKEY_R(22) = subR[21] ^ subR[23]; + if (max == 24) { + SUBKEY_L(23) = subL[22]; /* round 18 */ + SUBKEY_R(23) = subR[22]; + SUBKEY_L(24) = subL[24] ^ subL[23]; /* kw3 */ + SUBKEY_R(24) = subR[24] ^ subR[23]; + } else { + tl = subL[26] ^ (subR[26] & ~subR[24]); + dw = tl & subL[24], /* FL(kl5) */ + tr = subR[26] ^ ROL1(dw); + SUBKEY_L(23) = subL[22] ^ tl; /* round 18 */ + SUBKEY_R(23) = subR[22] ^ tr; + SUBKEY_L(24) = subL[24]; /* FL(kl5) */ + SUBKEY_R(24) = subR[24]; + SUBKEY_L(25) = subL[25]; /* FLinv(kl6) */ + SUBKEY_R(25) = subR[25]; + tl = subL[23] ^ (subR[23] & ~subR[25]); + dw = tl & subL[25], /* FLinv(kl6) */ + tr = subR[23] ^ ROL1(dw); + SUBKEY_L(26) = tl ^ subL[27]; /* round 19 */ + SUBKEY_R(26) = tr ^ subR[27]; + SUBKEY_L(27) = subL[26] ^ subL[28]; /* round 20 */ + SUBKEY_R(27) = subR[26] ^ subR[28]; + SUBKEY_L(28) = subL[27] ^ subL[29]; /* round 21 */ + SUBKEY_R(28) = subR[27] ^ subR[29]; + SUBKEY_L(29) = subL[28] ^ subL[30]; /* round 22 */ + SUBKEY_R(29) = subR[28] ^ subR[30]; + SUBKEY_L(30) = subL[29] ^ subL[31]; /* round 23 */ + SUBKEY_R(30) = subR[29] ^ subR[31]; + SUBKEY_L(31) = subL[30]; /* round 24 */ + SUBKEY_R(31) = subR[30]; + SUBKEY_L(32) = subL[32] ^ subL[31]; /* kw3 */ + SUBKEY_R(32) = subR[32] ^ subR[31]; + } + + /* apply the inverse of the last half of P-function */ + i = 2; do { dw = SUBKEY_L(i + 0) ^ SUBKEY_R(i + 0); dw = ROL8(dw);/* round 1 */ SUBKEY_R(i + 0) = SUBKEY_L(i + 0) ^ dw; SUBKEY_L(i + 0) = dw; @@ -415,21 +509,19 @@ static void camellia_setup128(const unsigned char *key, u32 *subkey) { u32 kll, klr, krl, krr; u32 il, ir, t0, t1, w0, w1; - u32 kw4l, kw4r, dw, tl, tr; + u32 kw4l, kw4r, dw; u32 subL[26]; u32 subR[26]; /** - * k == kll || klr || krl || krr (|| is concatination) + * k == kll || klr || krl || krr (|| is concatenation) */ GETU32(kll, key ); GETU32(klr, key + 4); GETU32(krl, key + 8); GETU32(krr, key + 12); - /** - * generate KL dependent subkeys - */ + /* generate KL dependent subkeys */ /* kw1 */ subL[0] = kll; subR[0] = klr; /* kw2 */ @@ -574,70 +666,7 @@ static void camellia_setup128(const unsigned char *key, u32 *subkey) /* kw1 */ subL[0] ^= kw4l; subR[0] ^= kw4r; - /* key XOR is end of F-function */ - SUBKEY_L(0) = subL[0] ^ subL[2];/* kw1 */ - SUBKEY_R(0) = subR[0] ^ subR[2]; - SUBKEY_L(2) = subL[3]; /* round 1 */ - SUBKEY_R(2) = subR[3]; - SUBKEY_L(3) = subL[2] ^ subL[4]; /* round 2 */ - SUBKEY_R(3) = subR[2] ^ subR[4]; - SUBKEY_L(4) = subL[3] ^ subL[5]; /* round 3 */ - SUBKEY_R(4) = subR[3] ^ subR[5]; - SUBKEY_L(5) = subL[4] ^ subL[6]; /* round 4 */ - SUBKEY_R(5) = subR[4] ^ subR[6]; - SUBKEY_L(6) = subL[5] ^ subL[7]; /* round 5 */ - SUBKEY_R(6) = subR[5] ^ subR[7]; - tl = subL[10] ^ (subR[10] & ~subR[8]); - dw = tl & subL[8], /* FL(kl1) */ - tr = subR[10] ^ ROL1(dw); - SUBKEY_L(7) = subL[6] ^ tl; /* round 6 */ - SUBKEY_R(7) = subR[6] ^ tr; - SUBKEY_L(8) = subL[8]; /* FL(kl1) */ - SUBKEY_R(8) = subR[8]; - SUBKEY_L(9) = subL[9]; /* FLinv(kl2) */ - SUBKEY_R(9) = subR[9]; - tl = subL[7] ^ (subR[7] & ~subR[9]); - dw = tl & subL[9], /* FLinv(kl2) */ - tr = subR[7] ^ ROL1(dw); - SUBKEY_L(10) = tl ^ subL[11]; /* round 7 */ - SUBKEY_R(10) = tr ^ subR[11]; - SUBKEY_L(11) = subL[10] ^ subL[12]; /* round 8 */ - SUBKEY_R(11) = subR[10] ^ subR[12]; - SUBKEY_L(12) = subL[11] ^ subL[13]; /* round 9 */ - SUBKEY_R(12) = subR[11] ^ subR[13]; - SUBKEY_L(13) = subL[12] ^ subL[14]; /* round 10 */ - SUBKEY_R(13) = subR[12] ^ subR[14]; - SUBKEY_L(14) = subL[13] ^ subL[15]; /* round 11 */ - SUBKEY_R(14) = subR[13] ^ subR[15]; - tl = subL[18] ^ (subR[18] & ~subR[16]); - dw = tl & subL[16], /* FL(kl3) */ - tr = subR[18] ^ ROL1(dw); - SUBKEY_L(15) = subL[14] ^ tl; /* round 12 */ - SUBKEY_R(15) = subR[14] ^ tr; - SUBKEY_L(16) = subL[16]; /* FL(kl3) */ - SUBKEY_R(16) = subR[16]; - SUBKEY_L(17) = subL[17]; /* FLinv(kl4) */ - SUBKEY_R(17) = subR[17]; - tl = subL[15] ^ (subR[15] & ~subR[17]); - dw = tl & subL[17], /* FLinv(kl4) */ - tr = subR[15] ^ ROL1(dw); - SUBKEY_L(18) = tl ^ subL[19]; /* round 13 */ - SUBKEY_R(18) = tr ^ subR[19]; - SUBKEY_L(19) = subL[18] ^ subL[20]; /* round 14 */ - SUBKEY_R(19) = subR[18] ^ subR[20]; - SUBKEY_L(20) = subL[19] ^ subL[21]; /* round 15 */ - SUBKEY_R(20) = subR[19] ^ subR[21]; - SUBKEY_L(21) = subL[20] ^ subL[22]; /* round 16 */ - SUBKEY_R(21) = subR[20] ^ subR[22]; - SUBKEY_L(22) = subL[21] ^ subL[23]; /* round 17 */ - SUBKEY_R(22) = subR[21] ^ subR[23]; - SUBKEY_L(23) = subL[22]; /* round 18 */ - SUBKEY_R(23) = subR[22]; - SUBKEY_L(24) = subL[24] ^ subL[23]; /* kw3 */ - SUBKEY_R(24) = subR[24] ^ subR[23]; - - /* apply the inverse of the last half of P-function */ - camellia_setup_tail(subkey, 24); + camellia_setup_tail(subkey, subL, subR, 24); } static void camellia_setup256(const unsigned char *key, u32 *subkey) @@ -645,13 +674,13 @@ static void camellia_setup256(const unsigned char *key, u32 *subkey) u32 kll, klr, krl, krr; /* left half of key */ u32 krll, krlr, krrl, krrr; /* right half of key */ u32 il, ir, t0, t1, w0, w1; /* temporary variables */ - u32 kw4l, kw4r, dw, tl, tr; + u32 kw4l, kw4r, dw; u32 subL[34]; u32 subR[34]; /** * key = (kll || klr || krl || krr || krll || krlr || krrl || krrr) - * (|| is concatination) + * (|| is concatenation) */ GETU32(kll, key ); GETU32(klr, key + 4); @@ -862,92 +891,7 @@ static void camellia_setup256(const unsigned char *key, u32 *subkey) /* kw1 */ subL[0] ^= kw4l; subR[0] ^= kw4r; - /* key XOR is end of F-function */ - SUBKEY_L(0) = subL[0] ^ subL[2];/* kw1 */ - SUBKEY_R(0) = subR[0] ^ subR[2]; - SUBKEY_L(2) = subL[3]; /* round 1 */ - SUBKEY_R(2) = subR[3]; - SUBKEY_L(3) = subL[2] ^ subL[4]; /* round 2 */ - SUBKEY_R(3) = subR[2] ^ subR[4]; - SUBKEY_L(4) = subL[3] ^ subL[5]; /* round 3 */ - SUBKEY_R(4) = subR[3] ^ subR[5]; - SUBKEY_L(5) = subL[4] ^ subL[6]; /* round 4 */ - SUBKEY_R(5) = subR[4] ^ subR[6]; - SUBKEY_L(6) = subL[5] ^ subL[7]; /* round 5 */ - SUBKEY_R(6) = subR[5] ^ subR[7]; - tl = subL[10] ^ (subR[10] & ~subR[8]); - dw = tl & subL[8], /* FL(kl1) */ - tr = subR[10] ^ ROL1(dw); - SUBKEY_L(7) = subL[6] ^ tl; /* round 6 */ - SUBKEY_R(7) = subR[6] ^ tr; - SUBKEY_L(8) = subL[8]; /* FL(kl1) */ - SUBKEY_R(8) = subR[8]; - SUBKEY_L(9) = subL[9]; /* FLinv(kl2) */ - SUBKEY_R(9) = subR[9]; - tl = subL[7] ^ (subR[7] & ~subR[9]); - dw = tl & subL[9], /* FLinv(kl2) */ - tr = subR[7] ^ ROL1(dw); - SUBKEY_L(10) = tl ^ subL[11]; /* round 7 */ - SUBKEY_R(10) = tr ^ subR[11]; - SUBKEY_L(11) = subL[10] ^ subL[12]; /* round 8 */ - SUBKEY_R(11) = subR[10] ^ subR[12]; - SUBKEY_L(12) = subL[11] ^ subL[13]; /* round 9 */ - SUBKEY_R(12) = subR[11] ^ subR[13]; - SUBKEY_L(13) = subL[12] ^ subL[14]; /* round 10 */ - SUBKEY_R(13) = subR[12] ^ subR[14]; - SUBKEY_L(14) = subL[13] ^ subL[15]; /* round 11 */ - SUBKEY_R(14) = subR[13] ^ subR[15]; - tl = subL[18] ^ (subR[18] & ~subR[16]); - dw = tl & subL[16], /* FL(kl3) */ - tr = subR[18] ^ ROL1(dw); - SUBKEY_L(15) = subL[14] ^ tl; /* round 12 */ - SUBKEY_R(15) = subR[14] ^ tr; - SUBKEY_L(16) = subL[16]; /* FL(kl3) */ - SUBKEY_R(16) = subR[16]; - SUBKEY_L(17) = subL[17]; /* FLinv(kl4) */ - SUBKEY_R(17) = subR[17]; - tl = subL[15] ^ (subR[15] & ~subR[17]); - dw = tl & subL[17], /* FLinv(kl4) */ - tr = subR[15] ^ ROL1(dw); - SUBKEY_L(18) = tl ^ subL[19]; /* round 13 */ - SUBKEY_R(18) = tr ^ subR[19]; - SUBKEY_L(19) = subL[18] ^ subL[20]; /* round 14 */ - SUBKEY_R(19) = subR[18] ^ subR[20]; - SUBKEY_L(20) = subL[19] ^ subL[21]; /* round 15 */ - SUBKEY_R(20) = subR[19] ^ subR[21]; - SUBKEY_L(21) = subL[20] ^ subL[22]; /* round 16 */ - SUBKEY_R(21) = subR[20] ^ subR[22]; - SUBKEY_L(22) = subL[21] ^ subL[23]; /* round 17 */ - SUBKEY_R(22) = subR[21] ^ subR[23]; - tl = subL[26] ^ (subR[26] & ~subR[24]); - dw = tl & subL[24], /* FL(kl5) */ - tr = subR[26] ^ ROL1(dw); - SUBKEY_L(23) = subL[22] ^ tl; /* round 18 */ - SUBKEY_R(23) = subR[22] ^ tr; - SUBKEY_L(24) = subL[24]; /* FL(kl5) */ - SUBKEY_R(24) = subR[24]; - SUBKEY_L(25) = subL[25]; /* FLinv(kl6) */ - SUBKEY_R(25) = subR[25]; - tl = subL[23] ^ (subR[23] & ~subR[25]); - dw = tl & subL[25], /* FLinv(kl6) */ - tr = subR[23] ^ ROL1(dw); - SUBKEY_L(26) = tl ^ subL[27]; /* round 19 */ - SUBKEY_R(26) = tr ^ subR[27]; - SUBKEY_L(27) = subL[26] ^ subL[28]; /* round 20 */ - SUBKEY_R(27) = subR[26] ^ subR[28]; - SUBKEY_L(28) = subL[27] ^ subL[29]; /* round 21 */ - SUBKEY_R(28) = subR[27] ^ subR[29]; - SUBKEY_L(29) = subL[28] ^ subL[30]; /* round 22 */ - SUBKEY_R(29) = subR[28] ^ subR[30]; - SUBKEY_L(30) = subL[29] ^ subL[31]; /* round 23 */ - SUBKEY_R(30) = subR[29] ^ subR[31]; - SUBKEY_L(31) = subL[30]; /* round 24 */ - SUBKEY_R(31) = subR[30]; - SUBKEY_L(32) = subL[32] ^ subL[31]; /* kw3 */ - SUBKEY_R(32) = subR[32] ^ subR[31]; - - /* apply the inverse of the last half of P-function */ - camellia_setup_tail(subkey, 32); + camellia_setup_tail(subkey, subL, subR, 32); } static void camellia_setup192(const unsigned char *key, u32 *subkey) -- cgit v1.2.3-59-g8ed1b From ff85a8082f0665fe6f79d50eb79bdccb98cabfa2 Mon Sep 17 00:00:00 2001 From: Denys Vlasenko Date: Fri, 23 Nov 2007 21:21:03 +0800 Subject: [CRYPTO] camellia: Move more common code into camellia_setup_tail Analogously to camellia7 patch, move "absorb kw2 to other subkeys" and "absorb kw4 to other subkeys" code parts into camellia_setup_tail(). This further reduces source and object code size at the cost of two brances in key setup code. Signed-off-by: Denys Vlasenko Signed-off-by: Herbert Xu --- crypto/camellia.c | 218 +++++++++++++++++++++--------------------------------- 1 file changed, 84 insertions(+), 134 deletions(-) diff --git a/crypto/camellia.c b/crypto/camellia.c index 86af42e92916..493fee7e0a8b 100644 --- a/crypto/camellia.c +++ b/crypto/camellia.c @@ -393,8 +393,92 @@ static const u32 camellia_sp4404[256] = { static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max) { u32 dw, tl, tr; + u32 kw4l, kw4r; int i; + /* absorb kw2 to other subkeys */ + /* round 2 */ + subL[3] ^= subL[1]; subR[3] ^= subR[1]; + /* round 4 */ + subL[5] ^= subL[1]; subR[5] ^= subR[1]; + /* round 6 */ + subL[7] ^= subL[1]; subR[7] ^= subR[1]; + subL[1] ^= subR[1] & ~subR[9]; + dw = subL[1] & subL[9], + subR[1] ^= ROL1(dw); /* modified for FLinv(kl2) */ + /* round 8 */ + subL[11] ^= subL[1]; subR[11] ^= subR[1]; + /* round 10 */ + subL[13] ^= subL[1]; subR[13] ^= subR[1]; + /* round 12 */ + subL[15] ^= subL[1]; subR[15] ^= subR[1]; + subL[1] ^= subR[1] & ~subR[17]; + dw = subL[1] & subL[17], + subR[1] ^= ROL1(dw); /* modified for FLinv(kl4) */ + /* round 14 */ + subL[19] ^= subL[1]; subR[19] ^= subR[1]; + /* round 16 */ + subL[21] ^= subL[1]; subR[21] ^= subR[1]; + /* round 18 */ + subL[23] ^= subL[1]; subR[23] ^= subR[1]; + if (max == 24) { + /* kw3 */ + subL[24] ^= subL[1]; subR[24] ^= subR[1]; + + /* absorb kw4 to other subkeys */ + kw4l = subL[25]; kw4r = subR[25]; + } else { + subL[1] ^= subR[1] & ~subR[25]; + dw = subL[1] & subL[25], + subR[1] ^= ROL1(dw); /* modified for FLinv(kl6) */ + /* round 20 */ + subL[27] ^= subL[1]; subR[27] ^= subR[1]; + /* round 22 */ + subL[29] ^= subL[1]; subR[29] ^= subR[1]; + /* round 24 */ + subL[31] ^= subL[1]; subR[31] ^= subR[1]; + /* kw3 */ + subL[32] ^= subL[1]; subR[32] ^= subR[1]; + + /* absorb kw4 to other subkeys */ + kw4l = subL[33]; kw4r = subR[33]; + /* round 23 */ + subL[30] ^= kw4l; subR[30] ^= kw4r; + /* round 21 */ + subL[28] ^= kw4l; subR[28] ^= kw4r; + /* round 19 */ + subL[26] ^= kw4l; subR[26] ^= kw4r; + kw4l ^= kw4r & ~subR[24]; + dw = kw4l & subL[24], + kw4r ^= ROL1(dw); /* modified for FL(kl5) */ + } + /* round 17 */ + subL[22] ^= kw4l; subR[22] ^= kw4r; + /* round 15 */ + subL[20] ^= kw4l; subR[20] ^= kw4r; + /* round 13 */ + subL[18] ^= kw4l; subR[18] ^= kw4r; + kw4l ^= kw4r & ~subR[16]; + dw = kw4l & subL[16], + kw4r ^= ROL1(dw); /* modified for FL(kl3) */ + /* round 11 */ + subL[14] ^= kw4l; subR[14] ^= kw4r; + /* round 9 */ + subL[12] ^= kw4l; subR[12] ^= kw4r; + /* round 7 */ + subL[10] ^= kw4l; subR[10] ^= kw4r; + kw4l ^= kw4r & ~subR[8]; + dw = kw4l & subL[8], + kw4r ^= ROL1(dw); /* modified for FL(kl1) */ + /* round 5 */ + subL[6] ^= kw4l; subR[6] ^= kw4r; + /* round 3 */ + subL[4] ^= kw4l; subR[4] ^= kw4r; + /* round 1 */ + subL[2] ^= kw4l; subR[2] ^= kw4r; + /* kw1 */ + subL[0] ^= kw4l; subR[0] ^= kw4r; + /* key XOR is end of F-function */ SUBKEY_L(0) = subL[0] ^ subL[2];/* kw1 */ SUBKEY_R(0) = subR[0] ^ subR[2]; @@ -509,7 +593,6 @@ static void camellia_setup128(const unsigned char *key, u32 *subkey) { u32 kll, klr, krl, krr; u32 il, ir, t0, t1, w0, w1; - u32 kw4l, kw4r, dw; u32 subL[26]; u32 subR[26]; @@ -609,63 +692,6 @@ static void camellia_setup128(const unsigned char *key, u32 *subkey) subL[24] = kll; subR[24] = klr; subL[25] = krl; subR[25] = krr; - /* absorb kw2 to other subkeys */ - /* round 2 */ - subL[3] ^= subL[1]; subR[3] ^= subR[1]; - /* round 4 */ - subL[5] ^= subL[1]; subR[5] ^= subR[1]; - /* round 6 */ - subL[7] ^= subL[1]; subR[7] ^= subR[1]; - subL[1] ^= subR[1] & ~subR[9]; - dw = subL[1] & subL[9], - subR[1] ^= ROL1(dw); /* modified for FLinv(kl2) */ - /* round 8 */ - subL[11] ^= subL[1]; subR[11] ^= subR[1]; - /* round 10 */ - subL[13] ^= subL[1]; subR[13] ^= subR[1]; - /* round 12 */ - subL[15] ^= subL[1]; subR[15] ^= subR[1]; - subL[1] ^= subR[1] & ~subR[17]; - dw = subL[1] & subL[17], - subR[1] ^= ROL1(dw); /* modified for FLinv(kl4) */ - /* round 14 */ - subL[19] ^= subL[1]; subR[19] ^= subR[1]; - /* round 16 */ - subL[21] ^= subL[1]; subR[21] ^= subR[1]; - /* round 18 */ - subL[23] ^= subL[1]; subR[23] ^= subR[1]; - /* kw3 */ - subL[24] ^= subL[1]; subR[24] ^= subR[1]; - - /* absorb kw4 to other subkeys */ - kw4l = subL[25]; kw4r = subR[25]; - /* round 17 */ - subL[22] ^= kw4l; subR[22] ^= kw4r; - /* round 15 */ - subL[20] ^= kw4l; subR[20] ^= kw4r; - /* round 13 */ - subL[18] ^= kw4l; subR[18] ^= kw4r; - kw4l ^= kw4r & ~subR[16]; - dw = kw4l & subL[16], - kw4r ^= ROL1(dw); /* modified for FL(kl3) */ - /* round 11 */ - subL[14] ^= kw4l; subR[14] ^= kw4r; - /* round 9 */ - subL[12] ^= kw4l; subR[12] ^= kw4r; - /* round 7 */ - subL[10] ^= kw4l; subR[10] ^= kw4r; - kw4l ^= kw4r & ~subR[8]; - dw = kw4l & subL[8], - kw4r ^= ROL1(dw); /* modified for FL(kl1) */ - /* round 5 */ - subL[6] ^= kw4l; subR[6] ^= kw4r; - /* round 3 */ - subL[4] ^= kw4l; subR[4] ^= kw4r; - /* round 1 */ - subL[2] ^= kw4l; subR[2] ^= kw4r; - /* kw1 */ - subL[0] ^= kw4l; subR[0] ^= kw4r; - camellia_setup_tail(subkey, subL, subR, 24); } @@ -674,7 +700,6 @@ static void camellia_setup256(const unsigned char *key, u32 *subkey) u32 kll, klr, krl, krr; /* left half of key */ u32 krll, krlr, krrl, krrr; /* right half of key */ u32 il, ir, t0, t1, w0, w1; /* temporary variables */ - u32 kw4l, kw4r, dw; u32 subL[34]; u32 subR[34]; @@ -816,81 +841,6 @@ static void camellia_setup256(const unsigned char *key, u32 *subkey) /* kw4 */ subL[33] = krrl; subR[33] = krrr; - /* absorb kw2 to other subkeys */ - /* round 2 */ - subL[3] ^= subL[1]; subR[3] ^= subR[1]; - /* round 4 */ - subL[5] ^= subL[1]; subR[5] ^= subR[1]; - /* round 6 */ - subL[7] ^= subL[1]; subR[7] ^= subR[1]; - subL[1] ^= subR[1] & ~subR[9]; - dw = subL[1] & subL[9], - subR[1] ^= ROL1(dw); /* modified for FLinv(kl2) */ - /* round 8 */ - subL[11] ^= subL[1]; subR[11] ^= subR[1]; - /* round 10 */ - subL[13] ^= subL[1]; subR[13] ^= subR[1]; - /* round 12 */ - subL[15] ^= subL[1]; subR[15] ^= subR[1]; - subL[1] ^= subR[1] & ~subR[17]; - dw = subL[1] & subL[17], - subR[1] ^= ROL1(dw); /* modified for FLinv(kl4) */ - /* round 14 */ - subL[19] ^= subL[1]; subR[19] ^= subR[1]; - /* round 16 */ - subL[21] ^= subL[1]; subR[21] ^= subR[1]; - /* round 18 */ - subL[23] ^= subL[1]; subR[23] ^= subR[1]; - subL[1] ^= subR[1] & ~subR[25]; - dw = subL[1] & subL[25], - subR[1] ^= ROL1(dw); /* modified for FLinv(kl6) */ - /* round 20 */ - subL[27] ^= subL[1]; subR[27] ^= subR[1]; - /* round 22 */ - subL[29] ^= subL[1]; subR[29] ^= subR[1]; - /* round 24 */ - subL[31] ^= subL[1]; subR[31] ^= subR[1]; - /* kw3 */ - subL[32] ^= subL[1]; subR[32] ^= subR[1]; - - /* absorb kw4 to other subkeys */ - kw4l = subL[33]; kw4r = subR[33]; - /* round 23 */ - subL[30] ^= kw4l; subR[30] ^= kw4r; - /* round 21 */ - subL[28] ^= kw4l; subR[28] ^= kw4r; - /* round 19 */ - subL[26] ^= kw4l; subR[26] ^= kw4r; - kw4l ^= kw4r & ~subR[24]; - dw = kw4l & subL[24], - kw4r ^= ROL1(dw); /* modified for FL(kl5) */ - /* round 17 */ - subL[22] ^= kw4l; subR[22] ^= kw4r; - /* round 15 */ - subL[20] ^= kw4l; subR[20] ^= kw4r; - /* round 13 */ - subL[18] ^= kw4l; subR[18] ^= kw4r; - kw4l ^= kw4r & ~subR[16]; - dw = kw4l & subL[16], - kw4r ^= ROL1(dw); /* modified for FL(kl3) */ - /* round 11 */ - subL[14] ^= kw4l; subR[14] ^= kw4r; - /* round 9 */ - subL[12] ^= kw4l; subR[12] ^= kw4r; - /* round 7 */ - subL[10] ^= kw4l; subR[10] ^= kw4r; - kw4l ^= kw4r & ~subR[8]; - dw = kw4l & subL[8], - kw4r ^= ROL1(dw); /* modified for FL(kl1) */ - /* round 5 */ - subL[6] ^= kw4l; subR[6] ^= kw4r; - /* round 3 */ - subL[4] ^= kw4l; subR[4] ^= kw4r; - /* round 1 */ - subL[2] ^= kw4l; subR[2] ^= kw4r; - /* kw1 */ - subL[0] ^= kw4l; subR[0] ^= kw4r; - camellia_setup_tail(subkey, subL, subR, 32); } -- cgit v1.2.3-59-g8ed1b From e3a4ea4fd2e5f154ae9233f1ce30e7564e5cbcfc Mon Sep 17 00:00:00 2001 From: Mikko Herranen Date: Mon, 26 Nov 2007 22:12:07 +0800 Subject: [CRYPTO] tcrypt: Add aead support Add AEAD support to tcrypt, needed by GCM. Signed-off-by: Mikko Herranen Reviewed-by: Mika Kukkonen Signed-off-by: Herbert Xu --- crypto/tcrypt.c | 258 ++++++++++++++++++++++++++++++++++++++++++++++++++++++-- crypto/tcrypt.h | 22 +++++ 2 files changed, 271 insertions(+), 9 deletions(-) diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c index b8cb1d1420ae..b343d81d20c9 100644 --- a/crypto/tcrypt.c +++ b/crypto/tcrypt.c @@ -6,12 +6,14 @@ * * Copyright (c) 2002 James Morris * Copyright (c) 2002 Jean-Francois Dive + * Copyright (c) 2007 Nokia Siemens Networks * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free * Software Foundation; either version 2 of the License, or (at your option) * any later version. * + * 2007-11-13 Added AEAD support * 2007-11-06 Added SHA-224 and SHA-224-HMAC tests * 2006-12-07 Added SHA384 HMAC and SHA512 HMAC tests * 2004-08-09 Added cipher speed tests (Reyk Floeter ) @@ -72,6 +74,7 @@ static unsigned int sec; static int mode; static char *xbuf; +static char *axbuf; static char *tvmem; static char *check[] = { @@ -169,6 +172,7 @@ static void test_hash(char *algo, struct hash_testvec *template, /* setup the dummy buffer first */ memset(xbuf, 0, XBUFSIZE); + memset(axbuf, 0, XBUFSIZE); j = 0; for (i = 0; i < tcount; i++) { @@ -217,6 +221,233 @@ out: crypto_free_hash(tfm); } +static void test_aead(char *algo, int enc, struct aead_testvec *template, + unsigned int tcount) +{ + unsigned int ret, i, j, k, temp; + unsigned int tsize; + char *q; + struct crypto_aead *tfm; + char *key; + struct aead_testvec *aead_tv; + struct aead_request *req; + struct scatterlist sg[8]; + struct scatterlist asg[8]; + const char *e; + struct tcrypt_result result; + + if (enc == ENCRYPT) + e = "encryption"; + else + e = "decryption"; + + printk(KERN_INFO "\ntesting %s %s\n", algo, e); + + tsize = sizeof(struct aead_testvec); + tsize *= tcount; + + if (tsize > TVMEMSIZE) { + printk(KERN_INFO "template (%u) too big for tvmem (%u)\n", + tsize, TVMEMSIZE); + return; + } + + memcpy(tvmem, template, tsize); + aead_tv = (void *)tvmem; + + init_completion(&result.completion); + + tfm = crypto_alloc_aead(algo, 0, 0); + + if (IS_ERR(tfm)) { + printk(KERN_INFO "failed to load transform for %s: %ld\n", + algo, PTR_ERR(tfm)); + return; + } + + req = aead_request_alloc(tfm, GFP_KERNEL); + if (!req) { + printk(KERN_INFO "failed to allocate request for %s\n", algo); + goto out; + } + + aead_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG, + tcrypt_complete, &result); + + for (i = 0, j = 0; i < tcount; i++) { + if (!aead_tv[i].np) { + printk(KERN_INFO "test %u (%d bit key):\n", + ++j, aead_tv[i].klen * 8); + + crypto_aead_clear_flags(tfm, ~0); + if (aead_tv[i].wk) + crypto_aead_set_flags( + tfm, CRYPTO_TFM_REQ_WEAK_KEY); + key = aead_tv[i].key; + + ret = crypto_aead_setkey(tfm, key, + aead_tv[i].klen); + if (ret) { + printk(KERN_INFO "setkey() failed flags=%x\n", + crypto_aead_get_flags(tfm)); + + if (!aead_tv[i].fail) + goto out; + } + + sg_init_one(&sg[0], aead_tv[i].input, + aead_tv[i].ilen); + + sg_init_one(&asg[0], aead_tv[i].assoc, + aead_tv[i].alen); + + aead_request_set_crypt(req, sg, sg, + aead_tv[i].ilen, + aead_tv[i].iv); + + aead_request_set_assoc(req, asg, aead_tv[i].alen); + + if (enc) { + ret = crypto_aead_encrypt(req); + } else { + memcpy(req->__ctx, aead_tv[i].tag, + aead_tv[i].tlen); + ret = crypto_aead_decrypt(req); + } + + switch (ret) { + case 0: + break; + case -EINPROGRESS: + case -EBUSY: + ret = wait_for_completion_interruptible( + &result.completion); + if (!ret && !(ret = result.err)) { + INIT_COMPLETION(result.completion); + break; + } + /* fall through */ + default: + printk(KERN_INFO "%s () failed err=%d\n", + e, -ret); + goto out; + } + + q = kmap(sg_page(&sg[0])) + sg[0].offset; + hexdump(q, aead_tv[i].rlen); + printk(KERN_INFO "auth tag: "); + hexdump((unsigned char *)req->__ctx, aead_tv[i].tlen); + + printk(KERN_INFO "enc/dec: %s\n", + memcmp(q, aead_tv[i].result, + aead_tv[i].rlen) ? "fail" : "pass"); + + printk(KERN_INFO "auth tag: %s\n", + memcmp(req->__ctx, aead_tv[i].tag, + aead_tv[i].tlen) ? "fail" : "pass"); + } + } + + printk(KERN_INFO "\ntesting %s %s across pages (chunking)\n", algo, e); + memset(xbuf, 0, XBUFSIZE); + + for (i = 0, j = 0; i < tcount; i++) { + if (aead_tv[i].np) { + printk(KERN_INFO "test %u (%d bit key):\n", + ++j, aead_tv[i].klen * 8); + + crypto_aead_clear_flags(tfm, ~0); + if (aead_tv[i].wk) + crypto_aead_set_flags( + tfm, CRYPTO_TFM_REQ_WEAK_KEY); + key = aead_tv[i].key; + + ret = crypto_aead_setkey(tfm, key, aead_tv[i].klen); + if (ret) { + printk(KERN_INFO "setkey() failed flags=%x\n", + crypto_aead_get_flags(tfm)); + + if (!aead_tv[i].fail) + goto out; + } + + sg_init_table(sg, aead_tv[i].np); + for (k = 0, temp = 0; k < aead_tv[i].np; k++) { + memcpy(&xbuf[IDX[k]], + aead_tv[i].input + temp, + aead_tv[i].tap[k]); + temp += aead_tv[i].tap[k]; + sg_set_buf(&sg[k], &xbuf[IDX[k]], + aead_tv[i].tap[k]); + } + + sg_init_table(asg, aead_tv[i].anp); + for (k = 0, temp = 0; k < aead_tv[i].anp; k++) { + memcpy(&axbuf[IDX[k]], + aead_tv[i].assoc + temp, + aead_tv[i].atap[k]); + temp += aead_tv[i].atap[k]; + sg_set_buf(&asg[k], &axbuf[IDX[k]], + aead_tv[i].atap[k]); + } + + aead_request_set_crypt(req, sg, sg, + aead_tv[i].ilen, + aead_tv[i].iv); + + aead_request_set_assoc(req, asg, aead_tv[i].alen); + + if (enc) { + ret = crypto_aead_encrypt(req); + } else { + memcpy(req->__ctx, aead_tv[i].tag, + aead_tv[i].tlen); + ret = crypto_aead_decrypt(req); + } + + switch (ret) { + case 0: + break; + case -EINPROGRESS: + case -EBUSY: + ret = wait_for_completion_interruptible( + &result.completion); + if (!ret && !(ret = result.err)) { + INIT_COMPLETION(result.completion); + break; + } + /* fall through */ + default: + printk(KERN_INFO "%s () failed err=%d\n", + e, -ret); + goto out; + } + + for (k = 0, temp = 0; k < aead_tv[i].np; k++) { + printk(KERN_INFO "page %u\n", k); + q = kmap(sg_page(&sg[k])) + sg[k].offset; + hexdump(q, aead_tv[i].tap[k]); + printk(KERN_INFO "%s\n", + memcmp(q, aead_tv[i].result + temp, + aead_tv[i].tap[k]) ? + "fail" : "pass"); + + temp += aead_tv[i].tap[k]; + } + printk(KERN_INFO "auth tag: "); + hexdump((unsigned char *)req->__ctx, aead_tv[i].tlen); + + printk(KERN_INFO "auth tag: %s\n", + memcmp(req->__ctx, aead_tv[i].tag, + aead_tv[i].tlen) ? "fail" : "pass"); + } + } + +out: + crypto_free_aead(tfm); + aead_request_free(req); +} + static void test_cipher(char *algo, int enc, struct cipher_testvec *template, unsigned int tcount) { @@ -1497,20 +1728,21 @@ static void do_test(void) static int __init init(void) { + int err = -ENOMEM; + tvmem = kmalloc(TVMEMSIZE, GFP_KERNEL); if (tvmem == NULL) - return -ENOMEM; + return err; xbuf = kmalloc(XBUFSIZE, GFP_KERNEL); - if (xbuf == NULL) { - kfree(tvmem); - return -ENOMEM; - } + if (xbuf == NULL) + goto err_free_tv; - do_test(); + axbuf = kmalloc(XBUFSIZE, GFP_KERNEL); + if (axbuf == NULL) + goto err_free_xbuf; - kfree(xbuf); - kfree(tvmem); + do_test(); /* We intentionaly return -EAGAIN to prevent keeping * the module. It does all its work from init() @@ -1518,7 +1750,15 @@ static int __init init(void) * => we don't need it in the memory, do we? * -- mludvig */ - return -EAGAIN; + err = -EAGAIN; + + kfree(axbuf); + err_free_xbuf: + kfree(xbuf); + err_free_tv: + kfree(tvmem); + + return err; } /* diff --git a/crypto/tcrypt.h b/crypto/tcrypt.h index 6ffc411bf464..865196a648a0 100644 --- a/crypto/tcrypt.h +++ b/crypto/tcrypt.h @@ -6,12 +6,14 @@ * * Copyright (c) 2002 James Morris * Copyright (c) 2002 Jean-Francois Dive + * Copyright (c) 2007 Nokia Siemens Networks * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free * Software Foundation; either version 2 of the License, or (at your option) * any later version. * + * 2007-11-13 Added AEAD support * 2006-12-07 Added SHA384 HMAC and SHA512 HMAC tests * 2004-08-09 Cipher speed tests by Reyk Floeter * 2003-09-14 Changes by Kartikey Mahendra Bhatt @@ -51,6 +53,26 @@ struct cipher_testvec { unsigned short rlen; }; +struct aead_testvec { + char key[MAX_KEYLEN] __attribute__ ((__aligned__(4))); + char iv[MAX_IVLEN]; + char input[512]; + char assoc[512]; + char result[512]; + char tag[128]; + unsigned char tap[MAX_TAP]; + unsigned char atap[MAX_TAP]; + int np; + int anp; + unsigned char fail; + unsigned char wk; /* weak key flag */ + unsigned char klen; + unsigned short ilen; + unsigned short alen; + unsigned short rlen; + unsigned short tlen; +}; + struct cipher_speed { unsigned char klen; unsigned int blen; -- cgit v1.2.3-59-g8ed1b From 28db8e3e38e593d22e2c69942bb1ca7be2a35f05 Mon Sep 17 00:00:00 2001 From: Mikko Herranen Date: Mon, 26 Nov 2007 22:24:11 +0800 Subject: [CRYPTO] gcm: New algorithm Add GCM/GMAC support to cryptoapi. GCM (Galois/Counter Mode) is an AEAD mode of operations for any block cipher with a block size of 16. The typical example is AES-GCM. Signed-off-by: Mikko Herranen Reviewed-by: Mika Kukkonen Signed-off-by: Herbert Xu --- crypto/Kconfig | 9 ++ crypto/Makefile | 1 + crypto/gcm.c | 465 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ crypto/tcrypt.c | 5 + crypto/tcrypt.h | 368 ++++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 848 insertions(+) create mode 100644 crypto/gcm.c diff --git a/crypto/Kconfig b/crypto/Kconfig index 8d6cac97021f..40ae92caa4f6 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -206,6 +206,15 @@ config CRYPTO_CTR CTR: Counter mode This block cipher algorithm is required for IPSec. +config CRYPTO_GCM + tristate "GCM/GMAC support" + select CRYPTO_CTR + select CRYPTO_AEAD + select CRYPTO_GF128MUL + help + Support for Galois/Counter Mode (GCM) and Galois Message + Authentication Code (GMAC). Required for IPSec. + config CRYPTO_CRYPTD tristate "Software async crypto daemon" select CRYPTO_ABLKCIPHER diff --git a/crypto/Makefile b/crypto/Makefile index 9b1476e5f0da..957343cbc0e2 100644 --- a/crypto/Makefile +++ b/crypto/Makefile @@ -33,6 +33,7 @@ obj-$(CONFIG_CRYPTO_PCBC) += pcbc.o obj-$(CONFIG_CRYPTO_LRW) += lrw.o obj-$(CONFIG_CRYPTO_XTS) += xts.o obj-$(CONFIG_CRYPTO_CTR) += ctr.o +obj-$(CONFIG_CRYPTO_GCM) += gcm.o obj-$(CONFIG_CRYPTO_CRYPTD) += cryptd.o obj-$(CONFIG_CRYPTO_DES) += des_generic.o obj-$(CONFIG_CRYPTO_FCRYPT) += fcrypt.o diff --git a/crypto/gcm.c b/crypto/gcm.c new file mode 100644 index 000000000000..ad8b8b9aeef2 --- /dev/null +++ b/crypto/gcm.c @@ -0,0 +1,465 @@ +/* + * GCM: Galois/Counter Mode. + * + * Copyright (c) 2007 Nokia Siemens Networks - Mikko Herranen + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "scatterwalk.h" + +struct gcm_instance_ctx { + struct crypto_spawn ctr; +}; + +struct crypto_gcm_ctx { + struct crypto_ablkcipher *ctr; + struct gf128mul_4k *gf128; +}; + +struct crypto_gcm_ghash_ctx { + u32 bytes; + u32 flags; + struct gf128mul_4k *gf128; + u8 buffer[16]; +}; + +struct crypto_gcm_req_priv_ctx { + u8 auth_tag[16]; + u8 counter[16]; + struct crypto_gcm_ghash_ctx ghash; +}; + +static void crypto_gcm_ghash_init(struct crypto_gcm_ghash_ctx *ctx, u32 flags, + struct gf128mul_4k *gf128) +{ + ctx->bytes = 0; + ctx->flags = flags; + ctx->gf128 = gf128; + memset(ctx->buffer, 0, 16); +} + +static void crypto_gcm_ghash_update(struct crypto_gcm_ghash_ctx *ctx, + const u8 *src, unsigned int srclen) +{ + u8 *dst = ctx->buffer; + + if (ctx->bytes) { + int n = min(srclen, ctx->bytes); + u8 *pos = dst + (16 - ctx->bytes); + + ctx->bytes -= n; + srclen -= n; + + while (n--) + *pos++ ^= *src++; + + if (!ctx->bytes) + gf128mul_4k_lle((be128 *)dst, ctx->gf128); + } + + while (srclen >= 16) { + crypto_xor(dst, src, 16); + gf128mul_4k_lle((be128 *)dst, ctx->gf128); + src += 16; + srclen -= 16; + } + + if (srclen) { + ctx->bytes = 16 - srclen; + while (srclen--) + *dst++ ^= *src++; + } +} + +static void crypto_gcm_ghash_update_sg(struct crypto_gcm_ghash_ctx *ctx, + struct scatterlist *sg, int len) +{ + struct scatter_walk walk; + u8 *src; + int n; + + scatterwalk_start(&walk, sg); + + while (len) { + n = scatterwalk_clamp(&walk, len); + + if (!n) { + scatterwalk_start(&walk, sg_next(walk.sg)); + n = scatterwalk_clamp(&walk, len); + } + + src = scatterwalk_map(&walk, 0); + + crypto_gcm_ghash_update(ctx, src, n); + len -= n; + + scatterwalk_unmap(src, 0); + scatterwalk_advance(&walk, n); + scatterwalk_done(&walk, 0, len); + if (len) + crypto_yield(ctx->flags); + } +} + +static void crypto_gcm_ghash_flush(struct crypto_gcm_ghash_ctx *ctx) +{ + u8 *dst = ctx->buffer; + + if (ctx->bytes) { + u8 *tmp = dst + (16 - ctx->bytes); + + while (ctx->bytes--) + *tmp++ ^= 0; + + gf128mul_4k_lle((be128 *)dst, ctx->gf128); + } + + ctx->bytes = 0; +} + +static void crypto_gcm_ghash_final_xor(struct crypto_gcm_ghash_ctx *ctx, + unsigned int authlen, + unsigned int cryptlen, u8 *dst) +{ + u8 *buf = ctx->buffer; + u128 lengths; + + lengths.a = cpu_to_be64(authlen * 8); + lengths.b = cpu_to_be64(cryptlen * 8); + + crypto_gcm_ghash_flush(ctx); + crypto_xor(buf, (u8 *)&lengths, 16); + gf128mul_4k_lle((be128 *)buf, ctx->gf128); + crypto_xor(dst, buf, 16); +} + +static inline void crypto_gcm_set_counter(u8 *counterblock, u32 value) +{ + *((u32 *)&counterblock[12]) = cpu_to_be32(value); +} + +static int crypto_gcm_encrypt_counter(struct crypto_aead *aead, u8 *block, + u32 value, const u8 *iv) +{ + struct crypto_gcm_ctx *ctx = crypto_aead_ctx(aead); + struct crypto_ablkcipher *ctr = ctx->ctr; + struct ablkcipher_request req; + struct scatterlist sg; + u8 counterblock[16]; + + if (iv == NULL) + memset(counterblock, 0, 12); + else + memcpy(counterblock, iv, 12); + + crypto_gcm_set_counter(counterblock, value); + + sg_init_one(&sg, block, 16); + ablkcipher_request_set_tfm(&req, ctr); + ablkcipher_request_set_crypt(&req, &sg, &sg, 16, counterblock); + ablkcipher_request_set_callback(&req, 0, NULL, NULL); + memset(block, 0, 16); + return crypto_ablkcipher_encrypt(&req); +} + +static int crypto_gcm_setkey(struct crypto_aead *aead, const u8 *key, + unsigned int keylen) +{ + struct crypto_gcm_ctx *ctx = crypto_aead_ctx(aead); + struct crypto_ablkcipher *ctr = ctx->ctr; + int alignmask = crypto_ablkcipher_alignmask(ctr); + u8 alignbuf[16+alignmask]; + u8 *hash = (u8 *)ALIGN((unsigned long)alignbuf, alignmask+1); + int err = 0; + + crypto_ablkcipher_clear_flags(ctr, CRYPTO_TFM_REQ_MASK); + crypto_ablkcipher_set_flags(ctr, crypto_aead_get_flags(aead) & + CRYPTO_TFM_REQ_MASK); + + err = crypto_ablkcipher_setkey(ctr, key, keylen); + if (err) + goto out; + + crypto_aead_set_flags(aead, crypto_ablkcipher_get_flags(ctr) & + CRYPTO_TFM_RES_MASK); + + err = crypto_gcm_encrypt_counter(aead, hash, -1, NULL); + if (err) + goto out; + + if (ctx->gf128 != NULL) + gf128mul_free_4k(ctx->gf128); + + ctx->gf128 = gf128mul_init_4k_lle((be128 *)hash); + + if (ctx->gf128 == NULL) + err = -ENOMEM; + + out: + return err; +} + +static int crypto_gcm_init_crypt(struct ablkcipher_request *ablk_req, + struct aead_request *req, + void (*done)(struct crypto_async_request *, + int)) +{ + struct crypto_aead *aead = crypto_aead_reqtfm(req); + struct crypto_gcm_ctx *ctx = crypto_aead_ctx(aead); + struct crypto_gcm_req_priv_ctx *pctx = aead_request_ctx(req); + u32 flags = req->base.tfm->crt_flags; + u8 *auth_tag = pctx->auth_tag; + u8 *counter = pctx->counter; + struct crypto_gcm_ghash_ctx *ghash = &pctx->ghash; + int err = 0; + + ablkcipher_request_set_tfm(ablk_req, ctx->ctr); + ablkcipher_request_set_callback(ablk_req, aead_request_flags(req), + done, req); + ablkcipher_request_set_crypt(ablk_req, req->src, req->dst, + req->cryptlen, counter); + + err = crypto_gcm_encrypt_counter(aead, auth_tag, 0, req->iv); + if (err) + goto out; + + memcpy(counter, req->iv, 12); + crypto_gcm_set_counter(counter, 1); + + crypto_gcm_ghash_init(ghash, flags, ctx->gf128); + + if (req->assoclen) { + crypto_gcm_ghash_update_sg(ghash, req->assoc, req->assoclen); + crypto_gcm_ghash_flush(ghash); + } + + out: + return err; +} + +static void crypto_gcm_encrypt_done(struct crypto_async_request *areq, int err) +{ + struct aead_request *req = areq->data; + struct crypto_gcm_req_priv_ctx *pctx = aead_request_ctx(req); + u8 *auth_tag = pctx->auth_tag; + struct crypto_gcm_ghash_ctx *ghash = &pctx->ghash; + + crypto_gcm_ghash_update_sg(ghash, req->dst, req->cryptlen); + crypto_gcm_ghash_final_xor(ghash, req->assoclen, req->cryptlen, + auth_tag); + + aead_request_complete(req, err); +} + +static int crypto_gcm_encrypt(struct aead_request *req) +{ + struct ablkcipher_request abreq; + struct crypto_gcm_req_priv_ctx *pctx = aead_request_ctx(req); + u8 *auth_tag = pctx->auth_tag; + struct crypto_gcm_ghash_ctx *ghash = &pctx->ghash; + int err = 0; + + err = crypto_gcm_init_crypt(&abreq, req, crypto_gcm_encrypt_done); + if (err) + return err; + + if (req->cryptlen) { + err = crypto_ablkcipher_encrypt(&abreq); + if (err) + return err; + + crypto_gcm_ghash_update_sg(ghash, req->dst, req->cryptlen); + } + + crypto_gcm_ghash_final_xor(ghash, req->assoclen, req->cryptlen, + auth_tag); + + return err; +} + +static void crypto_gcm_decrypt_done(struct crypto_async_request *areq, int err) +{ + aead_request_complete(areq->data, err); +} + +static int crypto_gcm_decrypt(struct aead_request *req) +{ + struct ablkcipher_request abreq; + struct crypto_gcm_req_priv_ctx *pctx = aead_request_ctx(req); + u8 *auth_tag = pctx->auth_tag; + struct crypto_gcm_ghash_ctx *ghash = &pctx->ghash; + u8 tag[16]; + int err; + + if (!req->cryptlen) + return -EINVAL; + + memcpy(tag, auth_tag, 16); + err = crypto_gcm_init_crypt(&abreq, req, crypto_gcm_decrypt_done); + if (err) + return err; + + crypto_gcm_ghash_update_sg(ghash, req->src, req->cryptlen); + crypto_gcm_ghash_final_xor(ghash, req->assoclen, req->cryptlen, + auth_tag); + + if (memcmp(tag, auth_tag, 16)) + return -EINVAL; + + return crypto_ablkcipher_decrypt(&abreq); +} + +static int crypto_gcm_init_tfm(struct crypto_tfm *tfm) +{ + struct crypto_instance *inst = (void *)tfm->__crt_alg; + struct gcm_instance_ctx *ictx = crypto_instance_ctx(inst); + struct crypto_gcm_ctx *ctx = crypto_tfm_ctx(tfm); + struct crypto_ablkcipher *ctr; + unsigned long align; + int err; + + ctr = crypto_spawn_ablkcipher(&ictx->ctr); + err = PTR_ERR(ctr); + if (IS_ERR(ctr)) + return err; + + ctx->ctr = ctr; + ctx->gf128 = NULL; + + align = max_t(unsigned long, crypto_ablkcipher_alignmask(ctr), + __alignof__(u32) - 1); + align &= ~(crypto_tfm_ctx_alignment() - 1); + tfm->crt_aead.reqsize = align + sizeof(struct crypto_gcm_req_priv_ctx); + + return 0; +} + +static void crypto_gcm_exit_tfm(struct crypto_tfm *tfm) +{ + struct crypto_gcm_ctx *ctx = crypto_tfm_ctx(tfm); + + if (ctx->gf128 != NULL) + gf128mul_free_4k(ctx->gf128); + + crypto_free_ablkcipher(ctx->ctr); +} + +static struct crypto_instance *crypto_gcm_alloc(struct rtattr **tb) +{ + struct crypto_instance *inst; + struct crypto_alg *ctr; + struct crypto_alg *cipher; + struct gcm_instance_ctx *ctx; + int err; + char ctr_name[CRYPTO_MAX_ALG_NAME]; + + err = crypto_check_attr_type(tb, CRYPTO_ALG_TYPE_AEAD); + if (err) + return ERR_PTR(err); + + cipher = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_CIPHER, + CRYPTO_ALG_TYPE_MASK); + + inst = ERR_PTR(PTR_ERR(cipher)); + if (IS_ERR(cipher)) + return inst; + + inst = ERR_PTR(ENAMETOOLONG); + if (snprintf( + ctr_name, CRYPTO_MAX_ALG_NAME, + "ctr(%s,0,16,4)", cipher->cra_name) >= CRYPTO_MAX_ALG_NAME) + return inst; + + ctr = crypto_alg_mod_lookup(ctr_name, CRYPTO_ALG_TYPE_BLKCIPHER, + CRYPTO_ALG_TYPE_MASK); + + if (IS_ERR(ctr)) + return ERR_PTR(PTR_ERR(ctr)); + + if (cipher->cra_blocksize != 16) + goto out_put_ctr; + + inst = kzalloc(sizeof(*inst) + sizeof(*ctx), GFP_KERNEL); + err = -ENOMEM; + if (!inst) + goto out_put_ctr; + + err = -ENAMETOOLONG; + if (snprintf(inst->alg.cra_name, CRYPTO_MAX_ALG_NAME, + "gcm(%s)", cipher->cra_name) >= CRYPTO_MAX_ALG_NAME || + snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME, + "gcm(%s)", cipher->cra_driver_name) >= CRYPTO_MAX_ALG_NAME) + goto err_free_inst; + + + ctx = crypto_instance_ctx(inst); + err = crypto_init_spawn(&ctx->ctr, ctr, inst, CRYPTO_ALG_TYPE_MASK); + if (err) + goto err_free_inst; + + inst->alg.cra_flags = CRYPTO_ALG_TYPE_AEAD | CRYPTO_ALG_ASYNC; + inst->alg.cra_priority = ctr->cra_priority; + inst->alg.cra_blocksize = 16; + inst->alg.cra_alignmask = __alignof__(u32) - 1; + inst->alg.cra_type = &crypto_aead_type; + inst->alg.cra_aead.ivsize = 12; + inst->alg.cra_aead.authsize = 16; + inst->alg.cra_ctxsize = sizeof(struct crypto_gcm_ctx); + inst->alg.cra_init = crypto_gcm_init_tfm; + inst->alg.cra_exit = crypto_gcm_exit_tfm; + inst->alg.cra_aead.setkey = crypto_gcm_setkey; + inst->alg.cra_aead.encrypt = crypto_gcm_encrypt; + inst->alg.cra_aead.decrypt = crypto_gcm_decrypt; + +out: + crypto_mod_put(ctr); + return inst; +err_free_inst: + kfree(inst); +out_put_ctr: + inst = ERR_PTR(err); + goto out; +} + +static void crypto_gcm_free(struct crypto_instance *inst) +{ + struct gcm_instance_ctx *ctx = crypto_instance_ctx(inst); + + crypto_drop_spawn(&ctx->ctr); + kfree(inst); +} + +static struct crypto_template crypto_gcm_tmpl = { + .name = "gcm", + .alloc = crypto_gcm_alloc, + .free = crypto_gcm_free, + .module = THIS_MODULE, +}; + +static int __init crypto_gcm_module_init(void) +{ + return crypto_register_template(&crypto_gcm_tmpl); +} + +static void __exit crypto_gcm_module_exit(void) +{ + crypto_unregister_template(&crypto_gcm_tmpl); +} + +module_init(crypto_gcm_module_init); +module_exit(crypto_gcm_module_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Galois/Counter Mode"); +MODULE_AUTHOR("Mikko Herranen "); diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c index b343d81d20c9..1e12b86bc951 100644 --- a/crypto/tcrypt.c +++ b/crypto/tcrypt.c @@ -13,6 +13,7 @@ * Software Foundation; either version 2 of the License, or (at your option) * any later version. * + * 2007-11-13 Added GCM tests * 2007-11-13 Added AEAD support * 2007-11-06 Added SHA-224 and SHA-224-HMAC tests * 2006-12-07 Added SHA384 HMAC and SHA512 HMAC tests @@ -1208,6 +1209,10 @@ static void do_test(void) AES_CTR_ENC_TEST_VECTORS); test_cipher("ctr(aes,4,8,4)", DECRYPT, aes_ctr_dec_tv_template, AES_CTR_DEC_TEST_VECTORS); + test_aead("gcm(aes)", ENCRYPT, aes_gcm_enc_tv_template, + AES_GCM_ENC_TEST_VECTORS); + test_aead("gcm(aes)", DECRYPT, aes_gcm_dec_tv_template, + AES_GCM_DEC_TEST_VECTORS); //CAST5 test_cipher("ecb(cast5)", ENCRYPT, cast5_enc_tv_template, diff --git a/crypto/tcrypt.h b/crypto/tcrypt.h index 865196a648a0..2384c41a6a08 100644 --- a/crypto/tcrypt.h +++ b/crypto/tcrypt.h @@ -13,6 +13,7 @@ * Software Foundation; either version 2 of the License, or (at your option) * any later version. * + * 2007-11-13 Added GCM tests * 2007-11-13 Added AEAD support * 2006-12-07 Added SHA384 HMAC and SHA512 HMAC tests * 2004-08-09 Cipher speed tests by Reyk Floeter @@ -2312,6 +2313,8 @@ static struct cipher_testvec cast6_dec_tv_template[] = { #define AES_XTS_DEC_TEST_VECTORS 4 #define AES_CTR_ENC_TEST_VECTORS 6 #define AES_CTR_DEC_TEST_VECTORS 6 +#define AES_GCM_ENC_TEST_VECTORS 9 +#define AES_GCM_DEC_TEST_VECTORS 8 static struct cipher_testvec aes_enc_tv_template[] = { { /* From FIPS-197 */ @@ -3529,6 +3532,371 @@ static struct cipher_testvec aes_ctr_dec_tv_template[] = { }, }; +static struct aead_testvec aes_gcm_enc_tv_template[] = { + { /* From McGrew & Viega - http://citeseer.ist.psu.edu/656989.html */ + .klen = 16, + .tag = { 0x58, 0xe2, 0xfc, 0xce, 0xfa, 0x7e, 0x30, 0x61, + 0x36, 0x7f, 0x1d, 0x57, 0xa4, 0xe7, 0x45, 0x5a }, + .tlen = 16 + }, { + .klen = 16, + .ilen = 16, + .result = { 0x03, 0x88, 0xda, 0xce, 0x60, 0xb6, 0xa3, 0x92, + 0xf3, 0x28, 0xc2, 0xb9, 0x71, 0xb2, 0xfe, 0x78 }, + .rlen = 16, + .tag = { 0xab, 0x6e, 0x47, 0xd4, 0x2c, 0xec, 0x13, 0xbd, + 0xf5, 0x3a, 0x67, 0xb2, 0x12, 0x57, 0xbd, 0xdf }, + .tlen = 16 + }, { + .key = { 0xfe, 0xff, 0xe9, 0x92, 0x86, 0x65, 0x73, 0x1c, + 0x6d, 0x6a, 0x8f, 0x94, 0x67, 0x30, 0x83, 0x08 }, + .klen = 16, + .iv = { 0xca, 0xfe, 0xba, 0xbe, 0xfa, 0xce, 0xdb, 0xad, + 0xde, 0xca, 0xf8, 0x88 }, + .input = { 0xd9, 0x31, 0x32, 0x25, 0xf8, 0x84, 0x06, 0xe5, + 0xa5, 0x59, 0x09, 0xc5, 0xaf, 0xf5, 0x26, 0x9a, + 0x86, 0xa7, 0xa9, 0x53, 0x15, 0x34, 0xf7, 0xda, + 0x2e, 0x4c, 0x30, 0x3d, 0x8a, 0x31, 0x8a, 0x72, + 0x1c, 0x3c, 0x0c, 0x95, 0x95, 0x68, 0x09, 0x53, + 0x2f, 0xcf, 0x0e, 0x24, 0x49, 0xa6, 0xb5, 0x25, + 0xb1, 0x6a, 0xed, 0xf5, 0xaa, 0x0d, 0xe6, 0x57, + 0xba, 0x63, 0x7b, 0x39, 0x1a, 0xaf, 0xd2, 0x55 }, + .ilen = 64, + .result = { 0x42, 0x83, 0x1e, 0xc2, 0x21, 0x77, 0x74, 0x24, + 0x4b, 0x72, 0x21, 0xb7, 0x84, 0xd0, 0xd4, 0x9c, + 0xe3, 0xaa, 0x21, 0x2f, 0x2c, 0x02, 0xa4, 0xe0, + 0x35, 0xc1, 0x7e, 0x23, 0x29, 0xac, 0xa1, 0x2e, + 0x21, 0xd5, 0x14, 0xb2, 0x54, 0x66, 0x93, 0x1c, + 0x7d, 0x8f, 0x6a, 0x5a, 0xac, 0x84, 0xaa, 0x05, + 0x1b, 0xa3, 0x0b, 0x39, 0x6a, 0x0a, 0xac, 0x97, + 0x3d, 0x58, 0xe0, 0x91, 0x47, 0x3f, 0x59, 0x85 }, + .rlen = 64, + .tag = { 0x4d, 0x5c, 0x2a, 0xf3, 0x27, 0xcd, 0x64, 0xa6, + 0x2c, 0xf3, 0x5a, 0xbd, 0x2b, 0xa6, 0xfa, 0xb4 }, + .tlen = 16 + }, { + .key = { 0xfe, 0xff, 0xe9, 0x92, 0x86, 0x65, 0x73, 0x1c, + 0x6d, 0x6a, 0x8f, 0x94, 0x67, 0x30, 0x83, 0x08 }, + .klen = 16, + .iv = { 0xca, 0xfe, 0xba, 0xbe, 0xfa, 0xce, 0xdb, 0xad, + 0xde, 0xca, 0xf8, 0x88 }, + .input = { 0xd9, 0x31, 0x32, 0x25, 0xf8, 0x84, 0x06, 0xe5, + 0xa5, 0x59, 0x09, 0xc5, 0xaf, 0xf5, 0x26, 0x9a, + 0x86, 0xa7, 0xa9, 0x53, 0x15, 0x34, 0xf7, 0xda, + 0x2e, 0x4c, 0x30, 0x3d, 0x8a, 0x31, 0x8a, 0x72, + 0x1c, 0x3c, 0x0c, 0x95, 0x95, 0x68, 0x09, 0x53, + 0x2f, 0xcf, 0x0e, 0x24, 0x49, 0xa6, 0xb5, 0x25, + 0xb1, 0x6a, 0xed, 0xf5, 0xaa, 0x0d, 0xe6, 0x57, + 0xba, 0x63, 0x7b, 0x39 }, + .ilen = 60, + .assoc = { 0xfe, 0xed, 0xfa, 0xce, 0xde, 0xad, 0xbe, 0xef, + 0xfe, 0xed, 0xfa, 0xce, 0xde, 0xad, 0xbe, 0xef, + 0xab, 0xad, 0xda, 0xd2 }, + .alen = 20, + .result = { 0x42, 0x83, 0x1e, 0xc2, 0x21, 0x77, 0x74, 0x24, + 0x4b, 0x72, 0x21, 0xb7, 0x84, 0xd0, 0xd4, 0x9c, + 0xe3, 0xaa, 0x21, 0x2f, 0x2c, 0x02, 0xa4, 0xe0, + 0x35, 0xc1, 0x7e, 0x23, 0x29, 0xac, 0xa1, 0x2e, + 0x21, 0xd5, 0x14, 0xb2, 0x54, 0x66, 0x93, 0x1c, + 0x7d, 0x8f, 0x6a, 0x5a, 0xac, 0x84, 0xaa, 0x05, + 0x1b, 0xa3, 0x0b, 0x39, 0x6a, 0x0a, 0xac, 0x97, + 0x3d, 0x58, 0xe0, 0x91 }, + .rlen = 60, + .tag = { 0x5b, 0xc9, 0x4f, 0xbc, 0x32, 0x21, 0xa5, 0xdb, + 0x94, 0xfa, 0xe9, 0x5a, 0xe7, 0x12, 0x1a, 0x47 }, + .tlen = 16 + }, { + .klen = 24, + .tag = { 0xcd, 0x33, 0xb2, 0x8a, 0xc7, 0x73, 0xf7, 0x4b, + 0xa0, 0x0e, 0xd1, 0xf3, 0x12, 0x57, 0x24, 0x35 }, + .tlen = 16 + }, { + .klen = 24, + .ilen = 16, + .result = { 0x98, 0xe7, 0x24, 0x7c, 0x07, 0xf0, 0xfe, 0x41, + 0x1c, 0x26, 0x7e, 0x43, 0x84, 0xb0, 0xf6, 0x00 }, + .rlen = 16, + .tag = { 0x2f, 0xf5, 0x8d, 0x80, 0x03, 0x39, 0x27, 0xab, + 0x8e, 0xf4, 0xd4, 0x58, 0x75, 0x14, 0xf0, 0xfb }, + .tlen = 16 + }, { + .key = { 0xfe, 0xff, 0xe9, 0x92, 0x86, 0x65, 0x73, 0x1c, + 0x6d, 0x6a, 0x8f, 0x94, 0x67, 0x30, 0x83, 0x08, + 0xfe, 0xff, 0xe9, 0x92, 0x86, 0x65, 0x73, 0x1c }, + .klen = 24, + .iv = { 0xca, 0xfe, 0xba, 0xbe, 0xfa, 0xce, 0xdb, 0xad, + 0xde, 0xca, 0xf8, 0x88 }, + .input = { 0xd9, 0x31, 0x32, 0x25, 0xf8, 0x84, 0x06, 0xe5, + 0xa5, 0x59, 0x09, 0xc5, 0xaf, 0xf5, 0x26, 0x9a, + 0x86, 0xa7, 0xa9, 0x53, 0x15, 0x34, 0xf7, 0xda, + 0x2e, 0x4c, 0x30, 0x3d, 0x8a, 0x31, 0x8a, 0x72, + 0x1c, 0x3c, 0x0c, 0x95, 0x95, 0x68, 0x09, 0x53, + 0x2f, 0xcf, 0x0e, 0x24, 0x49, 0xa6, 0xb5, 0x25, + 0xb1, 0x6a, 0xed, 0xf5, 0xaa, 0x0d, 0xe6, 0x57, + 0xba, 0x63, 0x7b, 0x39, 0x1a, 0xaf, 0xd2, 0x55 }, + .ilen = 64, + .result = { 0x39, 0x80, 0xca, 0x0b, 0x3c, 0x00, 0xe8, 0x41, + 0xeb, 0x06, 0xfa, 0xc4, 0x87, 0x2a, 0x27, 0x57, + 0x85, 0x9e, 0x1c, 0xea, 0xa6, 0xef, 0xd9, 0x84, + 0x62, 0x85, 0x93, 0xb4, 0x0c, 0xa1, 0xe1, 0x9c, + 0x7d, 0x77, 0x3d, 0x00, 0xc1, 0x44, 0xc5, 0x25, + 0xac, 0x61, 0x9d, 0x18, 0xc8, 0x4a, 0x3f, 0x47, + 0x18, 0xe2, 0x44, 0x8b, 0x2f, 0xe3, 0x24, 0xd9, + 0xcc, 0xda, 0x27, 0x10, 0xac, 0xad, 0xe2, 0x56 }, + .rlen = 64, + .tag = { 0x99, 0x24, 0xa7, 0xc8, 0x58, 0x73, 0x36, 0xbf, + 0xb1, 0x18, 0x02, 0x4d, 0xb8, 0x67, 0x4a, 0x14 }, + .tlen = 16 + }, { + .key = { 0xfe, 0xff, 0xe9, 0x92, 0x86, 0x65, 0x73, 0x1c, + 0x6d, 0x6a, 0x8f, 0x94, 0x67, 0x30, 0x83, 0x08, + 0xfe, 0xff, 0xe9, 0x92, 0x86, 0x65, 0x73, 0x1c }, + .klen = 24, + .iv = { 0xca, 0xfe, 0xba, 0xbe, 0xfa, 0xce, 0xdb, 0xad, + 0xde, 0xca, 0xf8, 0x88 }, + .input = { 0xd9, 0x31, 0x32, 0x25, 0xf8, 0x84, 0x06, 0xe5, + 0xa5, 0x59, 0x09, 0xc5, 0xaf, 0xf5, 0x26, 0x9a, + 0x86, 0xa7, 0xa9, 0x53, 0x15, 0x34, 0xf7, 0xda, + 0x2e, 0x4c, 0x30, 0x3d, 0x8a, 0x31, 0x8a, 0x72, + 0x1c, 0x3c, 0x0c, 0x95, 0x95, 0x68, 0x09, 0x53, + 0x2f, 0xcf, 0x0e, 0x24, 0x49, 0xa6, 0xb5, 0x25, + 0xb1, 0x6a, 0xed, 0xf5, 0xaa, 0x0d, 0xe6, 0x57, + 0xba, 0x63, 0x7b, 0x39 }, + .ilen = 60, + .assoc = { 0xfe, 0xed, 0xfa, 0xce, 0xde, 0xad, 0xbe, 0xef, + 0xfe, 0xed, 0xfa, 0xce, 0xde, 0xad, 0xbe, 0xef, + 0xab, 0xad, 0xda, 0xd2 }, + .alen = 20, + .result = { 0x39, 0x80, 0xca, 0x0b, 0x3c, 0x00, 0xe8, 0x41, + 0xeb, 0x06, 0xfa, 0xc4, 0x87, 0x2a, 0x27, 0x57, + 0x85, 0x9e, 0x1c, 0xea, 0xa6, 0xef, 0xd9, 0x84, + 0x62, 0x85, 0x93, 0xb4, 0x0c, 0xa1, 0xe1, 0x9c, + 0x7d, 0x77, 0x3d, 0x00, 0xc1, 0x44, 0xc5, 0x25, + 0xac, 0x61, 0x9d, 0x18, 0xc8, 0x4a, 0x3f, 0x47, + 0x18, 0xe2, 0x44, 0x8b, 0x2f, 0xe3, 0x24, 0xd9, + 0xcc, 0xda, 0x27, 0x10 }, + .rlen = 60, + .tag = { 0x25, 0x19, 0x49, 0x8e, 0x80, 0xf1, 0x47, 0x8f, + 0x37, 0xba, 0x55, 0xbd, 0x6d, 0x27, 0x61, 0x8c }, + .tlen = 16, + .np = 2, + .tap = { 32, 28 }, + .anp = 2, + .atap = { 8, 12 } + }, { + .klen = 32, + .tag = { 0x53, 0x0f, 0x8a, 0xfb, 0xc7, 0x45, 0x36, 0xb9, + 0xa9, 0x63, 0xb4, 0xf1, 0xc4, 0xcb, 0x73, 0x8b }, + .tlen = 16 + } +}; + +static struct aead_testvec aes_gcm_dec_tv_template[] = { + { /* From McGrew & Viega - http://citeseer.ist.psu.edu/656989.html */ + .klen = 32, + .input = { 0xce, 0xa7, 0x40, 0x3d, 0x4d, 0x60, 0x6b, 0x6e, + 0x07, 0x4e, 0xc5, 0xd3, 0xba, 0xf3, 0x9d, 0x18 }, + .ilen = 16, + .rlen = 16, + .tag = { 0xd0, 0xd1, 0xc8, 0xa7, 0x99, 0x99, 0x6b, 0xf0, + 0x26, 0x5b, 0x98, 0xb5, 0xd4, 0x8a, 0xb9, 0x19 }, + .tlen = 16 + }, { + .key = { 0xfe, 0xff, 0xe9, 0x92, 0x86, 0x65, 0x73, 0x1c, + 0x6d, 0x6a, 0x8f, 0x94, 0x67, 0x30, 0x83, 0x08, + 0xfe, 0xff, 0xe9, 0x92, 0x86, 0x65, 0x73, 0x1c, + 0x6d, 0x6a, 0x8f, 0x94, 0x67, 0x30, 0x83, 0x08 }, + .klen = 32, + .iv = { 0xca, 0xfe, 0xba, 0xbe, 0xfa, 0xce, 0xdb, 0xad, + 0xde, 0xca, 0xf8, 0x88 }, + .input = { 0x52, 0x2d, 0xc1, 0xf0, 0x99, 0x56, 0x7d, 0x07, + 0xf4, 0x7f, 0x37, 0xa3, 0x2a, 0x84, 0x42, 0x7d, + 0x64, 0x3a, 0x8c, 0xdc, 0xbf, 0xe5, 0xc0, 0xc9, + 0x75, 0x98, 0xa2, 0xbd, 0x25, 0x55, 0xd1, 0xaa, + 0x8c, 0xb0, 0x8e, 0x48, 0x59, 0x0d, 0xbb, 0x3d, + 0xa7, 0xb0, 0x8b, 0x10, 0x56, 0x82, 0x88, 0x38, + 0xc5, 0xf6, 0x1e, 0x63, 0x93, 0xba, 0x7a, 0x0a, + 0xbc, 0xc9, 0xf6, 0x62, 0x89, 0x80, 0x15, 0xad }, + .ilen = 64, + .result = { 0xd9, 0x31, 0x32, 0x25, 0xf8, 0x84, 0x06, 0xe5, + 0xa5, 0x59, 0x09, 0xc5, 0xaf, 0xf5, 0x26, 0x9a, + 0x86, 0xa7, 0xa9, 0x53, 0x15, 0x34, 0xf7, 0xda, + 0x2e, 0x4c, 0x30, 0x3d, 0x8a, 0x31, 0x8a, 0x72, + 0x1c, 0x3c, 0x0c, 0x95, 0x95, 0x68, 0x09, 0x53, + 0x2f, 0xcf, 0x0e, 0x24, 0x49, 0xa6, 0xb5, 0x25, + 0xb1, 0x6a, 0xed, 0xf5, 0xaa, 0x0d, 0xe6, 0x57, + 0xba, 0x63, 0x7b, 0x39, 0x1a, 0xaf, 0xd2, 0x55 }, + .rlen = 64, + .tag = { 0xb0, 0x94, 0xda, 0xc5, 0xd9, 0x34, 0x71, 0xbd, + 0xec, 0x1a, 0x50, 0x22, 0x70, 0xe3, 0xcc, 0x6c }, + .tlen = 16 + }, { + .key = { 0xfe, 0xff, 0xe9, 0x92, 0x86, 0x65, 0x73, 0x1c, + 0x6d, 0x6a, 0x8f, 0x94, 0x67, 0x30, 0x83, 0x08, + 0xfe, 0xff, 0xe9, 0x92, 0x86, 0x65, 0x73, 0x1c, + 0x6d, 0x6a, 0x8f, 0x94, 0x67, 0x30, 0x83, 0x08 }, + .klen = 32, + .iv = { 0xca, 0xfe, 0xba, 0xbe, 0xfa, 0xce, 0xdb, 0xad, + 0xde, 0xca, 0xf8, 0x88 }, + .input = { 0x52, 0x2d, 0xc1, 0xf0, 0x99, 0x56, 0x7d, 0x07, + 0xf4, 0x7f, 0x37, 0xa3, 0x2a, 0x84, 0x42, 0x7d, + 0x64, 0x3a, 0x8c, 0xdc, 0xbf, 0xe5, 0xc0, 0xc9, + 0x75, 0x98, 0xa2, 0xbd, 0x25, 0x55, 0xd1, 0xaa, + 0x8c, 0xb0, 0x8e, 0x48, 0x59, 0x0d, 0xbb, 0x3d, + 0xa7, 0xb0, 0x8b, 0x10, 0x56, 0x82, 0x88, 0x38, + 0xc5, 0xf6, 0x1e, 0x63, 0x93, 0xba, 0x7a, 0x0a, + 0xbc, 0xc9, 0xf6, 0x62 }, + .ilen = 60, + .assoc = { 0xfe, 0xed, 0xfa, 0xce, 0xde, 0xad, 0xbe, 0xef, + 0xfe, 0xed, 0xfa, 0xce, 0xde, 0xad, 0xbe, 0xef, + 0xab, 0xad, 0xda, 0xd2 }, + .alen = 20, + .result = { 0xd9, 0x31, 0x32, 0x25, 0xf8, 0x84, 0x06, 0xe5, + 0xa5, 0x59, 0x09, 0xc5, 0xaf, 0xf5, 0x26, 0x9a, + 0x86, 0xa7, 0xa9, 0x53, 0x15, 0x34, 0xf7, 0xda, + 0x2e, 0x4c, 0x30, 0x3d, 0x8a, 0x31, 0x8a, 0x72, + 0x1c, 0x3c, 0x0c, 0x95, 0x95, 0x68, 0x09, 0x53, + 0x2f, 0xcf, 0x0e, 0x24, 0x49, 0xa6, 0xb5, 0x25, + 0xb1, 0x6a, 0xed, 0xf5, 0xaa, 0x0d, 0xe6, 0x57, + 0xba, 0x63, 0x7b, 0x39 }, + .rlen = 60, + .tag = { 0x76, 0xfc, 0x6e, 0xce, 0x0f, 0x4e, 0x17, 0x68, + 0xcd, 0xdf, 0x88, 0x53, 0xbb, 0x2d, 0x55, 0x1b }, + .tlen = 16, + .np = 2, + .tap = { 48, 12 }, + .anp = 3, + .atap = { 8, 8, 4 } + }, { + .key = { 0xfe, 0xff, 0xe9, 0x92, 0x86, 0x65, 0x73, 0x1c, + 0x6d, 0x6a, 0x8f, 0x94, 0x67, 0x30, 0x83, 0x08 }, + .klen = 16, + .iv = { 0xca, 0xfe, 0xba, 0xbe, 0xfa, 0xce, 0xdb, 0xad, + 0xde, 0xca, 0xf8, 0x88 }, + .input = { 0x42, 0x83, 0x1e, 0xc2, 0x21, 0x77, 0x74, 0x24, + 0x4b, 0x72, 0x21, 0xb7, 0x84, 0xd0, 0xd4, 0x9c, + 0xe3, 0xaa, 0x21, 0x2f, 0x2c, 0x02, 0xa4, 0xe0, + 0x35, 0xc1, 0x7e, 0x23, 0x29, 0xac, 0xa1, 0x2e, + 0x21, 0xd5, 0x14, 0xb2, 0x54, 0x66, 0x93, 0x1c, + 0x7d, 0x8f, 0x6a, 0x5a, 0xac, 0x84, 0xaa, 0x05, + 0x1b, 0xa3, 0x0b, 0x39, 0x6a, 0x0a, 0xac, 0x97, + 0x3d, 0x58, 0xe0, 0x91, 0x47, 0x3f, 0x59, 0x85 }, + .ilen = 64, + .result = { 0xd9, 0x31, 0x32, 0x25, 0xf8, 0x84, 0x06, 0xe5, + 0xa5, 0x59, 0x09, 0xc5, 0xaf, 0xf5, 0x26, 0x9a, + 0x86, 0xa7, 0xa9, 0x53, 0x15, 0x34, 0xf7, 0xda, + 0x2e, 0x4c, 0x30, 0x3d, 0x8a, 0x31, 0x8a, 0x72, + 0x1c, 0x3c, 0x0c, 0x95, 0x95, 0x68, 0x09, 0x53, + 0x2f, 0xcf, 0x0e, 0x24, 0x49, 0xa6, 0xb5, 0x25, + 0xb1, 0x6a, 0xed, 0xf5, 0xaa, 0x0d, 0xe6, 0x57, + 0xba, 0x63, 0x7b, 0x39, 0x1a, 0xaf, 0xd2, 0x55 }, + .rlen = 64, + .tag = { 0x4d, 0x5c, 0x2a, 0xf3, 0x27, 0xcd, 0x64, 0xa6, + 0x2c, 0xf3, 0x5a, 0xbd, 0x2b, 0xa6, 0xfa, 0xb4 }, + .tlen = 16 + }, { + .key = { 0xfe, 0xff, 0xe9, 0x92, 0x86, 0x65, 0x73, 0x1c, + 0x6d, 0x6a, 0x8f, 0x94, 0x67, 0x30, 0x83, 0x08 }, + .klen = 16, + .iv = { 0xca, 0xfe, 0xba, 0xbe, 0xfa, 0xce, 0xdb, 0xad, + 0xde, 0xca, 0xf8, 0x88 }, + .input = { 0x42, 0x83, 0x1e, 0xc2, 0x21, 0x77, 0x74, 0x24, + 0x4b, 0x72, 0x21, 0xb7, 0x84, 0xd0, 0xd4, 0x9c, + 0xe3, 0xaa, 0x21, 0x2f, 0x2c, 0x02, 0xa4, 0xe0, + 0x35, 0xc1, 0x7e, 0x23, 0x29, 0xac, 0xa1, 0x2e, + 0x21, 0xd5, 0x14, 0xb2, 0x54, 0x66, 0x93, 0x1c, + 0x7d, 0x8f, 0x6a, 0x5a, 0xac, 0x84, 0xaa, 0x05, + 0x1b, 0xa3, 0x0b, 0x39, 0x6a, 0x0a, 0xac, 0x97, + 0x3d, 0x58, 0xe0, 0x91 }, + .ilen = 60, + .assoc = { 0xfe, 0xed, 0xfa, 0xce, 0xde, 0xad, 0xbe, 0xef, + 0xfe, 0xed, 0xfa, 0xce, 0xde, 0xad, 0xbe, 0xef, + 0xab, 0xad, 0xda, 0xd2 }, + .alen = 20, + .result = { 0xd9, 0x31, 0x32, 0x25, 0xf8, 0x84, 0x06, 0xe5, + 0xa5, 0x59, 0x09, 0xc5, 0xaf, 0xf5, 0x26, 0x9a, + 0x86, 0xa7, 0xa9, 0x53, 0x15, 0x34, 0xf7, 0xda, + 0x2e, 0x4c, 0x30, 0x3d, 0x8a, 0x31, 0x8a, 0x72, + 0x1c, 0x3c, 0x0c, 0x95, 0x95, 0x68, 0x09, 0x53, + 0x2f, 0xcf, 0x0e, 0x24, 0x49, 0xa6, 0xb5, 0x25, + 0xb1, 0x6a, 0xed, 0xf5, 0xaa, 0x0d, 0xe6, 0x57, + 0xba, 0x63, 0x7b, 0x39 }, + .rlen = 60, + .tag = { 0x5b, 0xc9, 0x4f, 0xbc, 0x32, 0x21, 0xa5, 0xdb, + 0x94, 0xfa, 0xe9, 0x5a, 0xe7, 0x12, 0x1a, 0x47 }, + .tlen = 16 + }, { + .klen = 24, + .input = { 0x98, 0xe7, 0x24, 0x7c, 0x07, 0xf0, 0xfe, 0x41, + 0x1c, 0x26, 0x7e, 0x43, 0x84, 0xb0, 0xf6, 0x00 }, + .ilen = 16, + .rlen = 16, + .tag = { 0x2f, 0xf5, 0x8d, 0x80, 0x03, 0x39, 0x27, 0xab, + 0x8e, 0xf4, 0xd4, 0x58, 0x75, 0x14, 0xf0, 0xfb }, + .tlen = 16 + }, { + .key = { 0xfe, 0xff, 0xe9, 0x92, 0x86, 0x65, 0x73, 0x1c, + 0x6d, 0x6a, 0x8f, 0x94, 0x67, 0x30, 0x83, 0x08, + 0xfe, 0xff, 0xe9, 0x92, 0x86, 0x65, 0x73, 0x1c }, + .klen = 24, + .iv = { 0xca, 0xfe, 0xba, 0xbe, 0xfa, 0xce, 0xdb, 0xad, + 0xde, 0xca, 0xf8, 0x88 }, + .input = { 0x39, 0x80, 0xca, 0x0b, 0x3c, 0x00, 0xe8, 0x41, + 0xeb, 0x06, 0xfa, 0xc4, 0x87, 0x2a, 0x27, 0x57, + 0x85, 0x9e, 0x1c, 0xea, 0xa6, 0xef, 0xd9, 0x84, + 0x62, 0x85, 0x93, 0xb4, 0x0c, 0xa1, 0xe1, 0x9c, + 0x7d, 0x77, 0x3d, 0x00, 0xc1, 0x44, 0xc5, 0x25, + 0xac, 0x61, 0x9d, 0x18, 0xc8, 0x4a, 0x3f, 0x47, + 0x18, 0xe2, 0x44, 0x8b, 0x2f, 0xe3, 0x24, 0xd9, + 0xcc, 0xda, 0x27, 0x10, 0xac, 0xad, 0xe2, 0x56 }, + .ilen = 64, + .result = { 0xd9, 0x31, 0x32, 0x25, 0xf8, 0x84, 0x06, 0xe5, + 0xa5, 0x59, 0x09, 0xc5, 0xaf, 0xf5, 0x26, 0x9a, + 0x86, 0xa7, 0xa9, 0x53, 0x15, 0x34, 0xf7, 0xda, + 0x2e, 0x4c, 0x30, 0x3d, 0x8a, 0x31, 0x8a, 0x72, + 0x1c, 0x3c, 0x0c, 0x95, 0x95, 0x68, 0x09, 0x53, + 0x2f, 0xcf, 0x0e, 0x24, 0x49, 0xa6, 0xb5, 0x25, + 0xb1, 0x6a, 0xed, 0xf5, 0xaa, 0x0d, 0xe6, 0x57, + 0xba, 0x63, 0x7b, 0x39, 0x1a, 0xaf, 0xd2, 0x55 }, + .rlen = 64, + .tag = { 0x99, 0x24, 0xa7, 0xc8, 0x58, 0x73, 0x36, 0xbf, + 0xb1, 0x18, 0x02, 0x4d, 0xb8, 0x67, 0x4a, 0x14 }, + .tlen = 16 + }, { + .key = { 0xfe, 0xff, 0xe9, 0x92, 0x86, 0x65, 0x73, 0x1c, + 0x6d, 0x6a, 0x8f, 0x94, 0x67, 0x30, 0x83, 0x08, + 0xfe, 0xff, 0xe9, 0x92, 0x86, 0x65, 0x73, 0x1c }, + .klen = 24, + .iv = { 0xca, 0xfe, 0xba, 0xbe, 0xfa, 0xce, 0xdb, 0xad, + 0xde, 0xca, 0xf8, 0x88 }, + .input = { 0x39, 0x80, 0xca, 0x0b, 0x3c, 0x00, 0xe8, 0x41, + 0xeb, 0x06, 0xfa, 0xc4, 0x87, 0x2a, 0x27, 0x57, + 0x85, 0x9e, 0x1c, 0xea, 0xa6, 0xef, 0xd9, 0x84, + 0x62, 0x85, 0x93, 0xb4, 0x0c, 0xa1, 0xe1, 0x9c, + 0x7d, 0x77, 0x3d, 0x00, 0xc1, 0x44, 0xc5, 0x25, + 0xac, 0x61, 0x9d, 0x18, 0xc8, 0x4a, 0x3f, 0x47, + 0x18, 0xe2, 0x44, 0x8b, 0x2f, 0xe3, 0x24, 0xd9, + 0xcc, 0xda, 0x27, 0x10 }, + .ilen = 60, + .assoc = { 0xfe, 0xed, 0xfa, 0xce, 0xde, 0xad, 0xbe, 0xef, + 0xfe, 0xed, 0xfa, 0xce, 0xde, 0xad, 0xbe, 0xef, + 0xab, 0xad, 0xda, 0xd2 }, + .alen = 20, + .result = { 0xd9, 0x31, 0x32, 0x25, 0xf8, 0x84, 0x06, 0xe5, + 0xa5, 0x59, 0x09, 0xc5, 0xaf, 0xf5, 0x26, 0x9a, + 0x86, 0xa7, 0xa9, 0x53, 0x15, 0x34, 0xf7, 0xda, + 0x2e, 0x4c, 0x30, 0x3d, 0x8a, 0x31, 0x8a, 0x72, + 0x1c, 0x3c, 0x0c, 0x95, 0x95, 0x68, 0x09, 0x53, + 0x2f, 0xcf, 0x0e, 0x24, 0x49, 0xa6, 0xb5, 0x25, + 0xb1, 0x6a, 0xed, 0xf5, 0xaa, 0x0d, 0xe6, 0x57, + 0xba, 0x63, 0x7b, 0x39 }, + .rlen = 60, + .tag = { 0x25, 0x19, 0x49, 0x8e, 0x80, 0xf1, 0x47, 0x8f, + 0x37, 0xba, 0x55, 0xbd, 0x6d, 0x27, 0x61, 0x8c }, + .tlen = 16 + } +}; + /* Cast5 test vectors from RFC 2144 */ #define CAST5_ENC_TEST_VECTORS 3 #define CAST5_DEC_TEST_VECTORS 3 -- cgit v1.2.3-59-g8ed1b From 06e1a8f0505426a97292174a959560fd86ea0a3d Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Fri, 30 Nov 2007 00:15:11 +1100 Subject: [CRYPTO] aes-asm: Merge common glue code 32 bit and 64 bit glue code is using (now) the same piece code. This patch unifies them. Signed-off-by: Sebastian Siewior Signed-off-by: Herbert Xu --- arch/x86/crypto/Makefile | 4 ++-- arch/x86/crypto/aes_32.c | 58 ---------------------------------------------- arch/x86/crypto/aes_64.c | 56 -------------------------------------------- arch/x86/crypto/aes_glue.c | 57 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 59 insertions(+), 116 deletions(-) delete mode 100644 arch/x86/crypto/aes_32.c delete mode 100644 arch/x86/crypto/aes_64.c create mode 100644 arch/x86/crypto/aes_glue.c diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile index 46bb609e2444..b8fbb43df6d7 100644 --- a/arch/x86/crypto/Makefile +++ b/arch/x86/crypto/Makefile @@ -8,8 +8,8 @@ obj-$(CONFIG_CRYPTO_TWOFISH_586) += twofish-i586.o obj-$(CONFIG_CRYPTO_AES_X86_64) += aes-x86_64.o obj-$(CONFIG_CRYPTO_TWOFISH_X86_64) += twofish-x86_64.o -aes-i586-y := aes-i586-asm_32.o aes_32.o +aes-i586-y := aes-i586-asm_32.o aes_glue.o twofish-i586-y := twofish-i586-asm_32.o twofish_32.o -aes-x86_64-y := aes-x86_64-asm_64.o aes_64.o +aes-x86_64-y := aes-x86_64-asm_64.o aes_glue.o twofish-x86_64-y := twofish-x86_64-asm_64.o twofish_64.o diff --git a/arch/x86/crypto/aes_32.c b/arch/x86/crypto/aes_32.c deleted file mode 100644 index 8556d9561c20..000000000000 --- a/arch/x86/crypto/aes_32.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Glue Code for optimized 586 assembler version of AES - */ - -#include -#include -#include - -asmlinkage void aes_enc_blk(struct crypto_tfm *tfm, u8 *dst, const u8 *src); -asmlinkage void aes_dec_blk(struct crypto_tfm *tfm, u8 *dst, const u8 *src); - -static void aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) -{ - aes_enc_blk(tfm, dst, src); -} - -static void aes_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) -{ - aes_dec_blk(tfm, dst, src); -} - -static struct crypto_alg aes_alg = { - .cra_name = "aes", - .cra_driver_name = "aes-i586", - .cra_priority = 200, - .cra_flags = CRYPTO_ALG_TYPE_CIPHER, - .cra_blocksize = AES_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct crypto_aes_ctx), - .cra_module = THIS_MODULE, - .cra_list = LIST_HEAD_INIT(aes_alg.cra_list), - .cra_u = { - .cipher = { - .cia_min_keysize = AES_MIN_KEY_SIZE, - .cia_max_keysize = AES_MAX_KEY_SIZE, - .cia_setkey = crypto_aes_set_key, - .cia_encrypt = aes_encrypt, - .cia_decrypt = aes_decrypt - } - } -}; - -static int __init aes_init(void) -{ - return crypto_register_alg(&aes_alg); -} - -static void __exit aes_fini(void) -{ - crypto_unregister_alg(&aes_alg); -} - -module_init(aes_init); -module_exit(aes_fini); - -MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm, i586 asm optimized"); -MODULE_LICENSE("Dual BSD/GPL"); -MODULE_AUTHOR("Fruhwirth Clemens, James Morris, Brian Gladman, Adam Richter"); -MODULE_ALIAS("aes"); diff --git a/arch/x86/crypto/aes_64.c b/arch/x86/crypto/aes_64.c deleted file mode 100644 index d7a41a97dd3f..000000000000 --- a/arch/x86/crypto/aes_64.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Glue Code for AES Cipher Algorithm - * - */ - -#include - -asmlinkage void aes_enc_blk(struct crypto_tfm *tfm, u8 *out, const u8 *in); -asmlinkage void aes_dec_blk(struct crypto_tfm *tfm, u8 *out, const u8 *in); - -static void aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) -{ - aes_enc_blk(tfm, dst, src); -} - -static void aes_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) -{ - aes_dec_blk(tfm, dst, src); -} - -static struct crypto_alg aes_alg = { - .cra_name = "aes", - .cra_driver_name = "aes-x86_64", - .cra_priority = 200, - .cra_flags = CRYPTO_ALG_TYPE_CIPHER, - .cra_blocksize = AES_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct crypto_aes_ctx), - .cra_module = THIS_MODULE, - .cra_list = LIST_HEAD_INIT(aes_alg.cra_list), - .cra_u = { - .cipher = { - .cia_min_keysize = AES_MIN_KEY_SIZE, - .cia_max_keysize = AES_MAX_KEY_SIZE, - .cia_setkey = crypto_aes_set_key, - .cia_encrypt = aes_encrypt, - .cia_decrypt = aes_decrypt - } - } -}; - -static int __init aes_init(void) -{ - return crypto_register_alg(&aes_alg); -} - -static void __exit aes_fini(void) -{ - crypto_unregister_alg(&aes_alg); -} - -module_init(aes_init); -module_exit(aes_fini); - -MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("aes"); diff --git a/arch/x86/crypto/aes_glue.c b/arch/x86/crypto/aes_glue.c new file mode 100644 index 000000000000..71f457827116 --- /dev/null +++ b/arch/x86/crypto/aes_glue.c @@ -0,0 +1,57 @@ +/* + * Glue Code for the asm optimized version of the AES Cipher Algorithm + * + */ + +#include + +asmlinkage void aes_enc_blk(struct crypto_tfm *tfm, u8 *out, const u8 *in); +asmlinkage void aes_dec_blk(struct crypto_tfm *tfm, u8 *out, const u8 *in); + +static void aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) +{ + aes_enc_blk(tfm, dst, src); +} + +static void aes_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) +{ + aes_dec_blk(tfm, dst, src); +} + +static struct crypto_alg aes_alg = { + .cra_name = "aes", + .cra_driver_name = "aes-asm", + .cra_priority = 200, + .cra_flags = CRYPTO_ALG_TYPE_CIPHER, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct crypto_aes_ctx), + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(aes_alg.cra_list), + .cra_u = { + .cipher = { + .cia_min_keysize = AES_MIN_KEY_SIZE, + .cia_max_keysize = AES_MAX_KEY_SIZE, + .cia_setkey = crypto_aes_set_key, + .cia_encrypt = aes_encrypt, + .cia_decrypt = aes_decrypt + } + } +}; + +static int __init aes_init(void) +{ + return crypto_register_alg(&aes_alg); +} + +static void __exit aes_fini(void) +{ + crypto_unregister_alg(&aes_alg); +} + +module_init(aes_init); +module_exit(aes_fini); + +MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm, asm optimized"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("aes"); +MODULE_ALIAS("aes-asm"); -- cgit v1.2.3-59-g8ed1b From 0971eb0de9446b66bd45696338f54948314db379 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 30 Nov 2007 00:23:53 +1100 Subject: [CRYPTO] ctr: Fix multi-page processing When the data spans across a page boundary, CTR may incorrectly process a partial block in the middle because the blkcipher walking code may supply partial blocks in the middle as long as the total length of the supplied data is more than a block. CTR is supposed to return any unused partial block in that case to the walker. This patch fixes this by doing exactly that, returning partial blocks to the walker unless we received less than a block-worth of data to start with. This also allows us to optimise the bulk of the processing since we no longer have to worry about partial blocks until the very end. Thanks to Tan Swee Heng for fixes and actually testing this :) Signed-off-by: Herbert Xu --- crypto/ctr.c | 64 +++++++++++++++++++++++++++++++----------------------------- 1 file changed, 33 insertions(+), 31 deletions(-) diff --git a/crypto/ctr.c b/crypto/ctr.c index b816e959fa55..57da7d0affcb 100644 --- a/crypto/ctr.c +++ b/crypto/ctr.c @@ -59,6 +59,21 @@ static int crypto_ctr_setkey(struct crypto_tfm *parent, const u8 *key, return err; } +static void crypto_ctr_crypt_final(struct blkcipher_walk *walk, + struct crypto_cipher *tfm, u8 *ctrblk, + unsigned int countersize) +{ + unsigned int bsize = crypto_cipher_blocksize(tfm); + u8 *keystream = ctrblk + bsize; + u8 *src = walk->src.virt.addr; + u8 *dst = walk->dst.virt.addr; + unsigned int nbytes = walk->nbytes; + + crypto_cipher_encrypt_one(tfm, keystream, ctrblk); + crypto_xor(keystream, src, nbytes); + memcpy(dst, keystream, nbytes); +} + static int crypto_ctr_crypt_segment(struct blkcipher_walk *walk, struct crypto_cipher *tfm, u8 *ctrblk, unsigned int countersize) @@ -66,35 +81,23 @@ static int crypto_ctr_crypt_segment(struct blkcipher_walk *walk, void (*fn)(struct crypto_tfm *, u8 *, const u8 *) = crypto_cipher_alg(tfm)->cia_encrypt; unsigned int bsize = crypto_cipher_blocksize(tfm); - unsigned long alignmask = crypto_cipher_alignmask(tfm) | - (__alignof__(u32) - 1); - u8 ks[bsize + alignmask]; - u8 *keystream = (u8 *)ALIGN((unsigned long)ks, alignmask + 1); u8 *src = walk->src.virt.addr; u8 *dst = walk->dst.virt.addr; unsigned int nbytes = walk->nbytes; do { /* create keystream */ - fn(crypto_cipher_tfm(tfm), keystream, ctrblk); - crypto_xor(keystream, src, min(nbytes, bsize)); - - /* copy result into dst */ - memcpy(dst, keystream, min(nbytes, bsize)); + fn(crypto_cipher_tfm(tfm), dst, ctrblk); + crypto_xor(dst, src, bsize); /* increment counter in counterblock */ crypto_inc(ctrblk + bsize - countersize, countersize); - if (nbytes < bsize) - break; - src += bsize; dst += bsize; - nbytes -= bsize; - - } while (nbytes); + } while ((nbytes -= bsize) >= bsize); - return 0; + return nbytes; } static int crypto_ctr_crypt_inplace(struct blkcipher_walk *walk, @@ -104,30 +107,22 @@ static int crypto_ctr_crypt_inplace(struct blkcipher_walk *walk, void (*fn)(struct crypto_tfm *, u8 *, const u8 *) = crypto_cipher_alg(tfm)->cia_encrypt; unsigned int bsize = crypto_cipher_blocksize(tfm); - unsigned long alignmask = crypto_cipher_alignmask(tfm) | - (__alignof__(u32) - 1); unsigned int nbytes = walk->nbytes; u8 *src = walk->src.virt.addr; - u8 ks[bsize + alignmask]; - u8 *keystream = (u8 *)ALIGN((unsigned long)ks, alignmask + 1); + u8 *keystream = ctrblk + bsize; do { /* create keystream */ fn(crypto_cipher_tfm(tfm), keystream, ctrblk); - crypto_xor(src, keystream, min(nbytes, bsize)); + crypto_xor(src, keystream, bsize); /* increment counter in counterblock */ crypto_inc(ctrblk + bsize - countersize, countersize); - if (nbytes < bsize) - break; - src += bsize; - nbytes -= bsize; + } while ((nbytes -= bsize) >= bsize); - } while (nbytes); - - return 0; + return nbytes; } static int crypto_ctr_crypt(struct blkcipher_desc *desc, @@ -143,7 +138,7 @@ static int crypto_ctr_crypt(struct blkcipher_desc *desc, crypto_instance_ctx(crypto_tfm_alg_instance(&tfm->base)); unsigned long alignmask = crypto_cipher_alignmask(child) | (__alignof__(u32) - 1); - u8 cblk[bsize + alignmask]; + u8 cblk[bsize * 2 + alignmask]; u8 *counterblk = (u8 *)ALIGN((unsigned long)cblk, alignmask + 1); int err; @@ -158,7 +153,7 @@ static int crypto_ctr_crypt(struct blkcipher_desc *desc, /* initialize counter portion of counter block */ crypto_inc(counterblk + bsize - ictx->countersize, ictx->countersize); - while (walk.nbytes) { + while (walk.nbytes >= bsize) { if (walk.src.virt.addr == walk.dst.virt.addr) nbytes = crypto_ctr_crypt_inplace(&walk, child, counterblk, @@ -170,6 +165,13 @@ static int crypto_ctr_crypt(struct blkcipher_desc *desc, err = blkcipher_walk_done(desc, &walk, nbytes); } + + if (walk.nbytes) { + crypto_ctr_crypt_final(&walk, child, counterblk, + ictx->countersize); + err = blkcipher_walk_done(desc, &walk, 0); + } + return err; } @@ -277,7 +279,7 @@ static struct crypto_instance *crypto_ctr_alloc(struct rtattr **tb) inst->alg.cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER; inst->alg.cra_priority = alg->cra_priority; inst->alg.cra_blocksize = 1; - inst->alg.cra_alignmask = __alignof__(u32) - 1; + inst->alg.cra_alignmask = alg->cra_alignmask | (__alignof__(u32) - 1); inst->alg.cra_type = &crypto_blkcipher_type; inst->alg.cra_blkcipher.ivsize = ivsize; -- cgit v1.2.3-59-g8ed1b From 6d1a69d53a34e6d906551d92e7639b739332b177 Mon Sep 17 00:00:00 2001 From: Tan Swee Heng Date: Fri, 30 Nov 2007 00:30:11 +1100 Subject: [CRYPTO] tcrypt: Support for large test vectors Currently the number of entries in a cipher test vector template is limited by TVMEMSIZE/sizeof(struct cipher_testvec). This patch circumvents the problem by pointing cipher_tv to each entry in the template, rather than the template itself. Signed-off-by: Tan Swee Heng Signed-off-by: Herbert Xu --- crypto/tcrypt.c | 70 ++++++++++++++++++++++++++++----------------------------- 1 file changed, 34 insertions(+), 36 deletions(-) diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c index 1e12b86bc951..71dc02ae8a43 100644 --- a/crypto/tcrypt.c +++ b/crypto/tcrypt.c @@ -471,15 +471,11 @@ static void test_cipher(char *algo, int enc, printk("\ntesting %s %s\n", algo, e); tsize = sizeof (struct cipher_testvec); - tsize *= tcount; - if (tsize > TVMEMSIZE) { printk("template (%u) too big for tvmem (%u)\n", tsize, TVMEMSIZE); return; } - - memcpy(tvmem, template, tsize); cipher_tv = (void *)tvmem; init_completion(&result.completion); @@ -503,33 +499,34 @@ static void test_cipher(char *algo, int enc, j = 0; for (i = 0; i < tcount; i++) { - if (!(cipher_tv[i].np)) { + memcpy(cipher_tv, &template[i], tsize); + if (!(cipher_tv->np)) { j++; printk("test %u (%d bit key):\n", - j, cipher_tv[i].klen * 8); + j, cipher_tv->klen * 8); crypto_ablkcipher_clear_flags(tfm, ~0); - if (cipher_tv[i].wk) + if (cipher_tv->wk) crypto_ablkcipher_set_flags( tfm, CRYPTO_TFM_REQ_WEAK_KEY); - key = cipher_tv[i].key; + key = cipher_tv->key; ret = crypto_ablkcipher_setkey(tfm, key, - cipher_tv[i].klen); + cipher_tv->klen); if (ret) { printk("setkey() failed flags=%x\n", crypto_ablkcipher_get_flags(tfm)); - if (!cipher_tv[i].fail) + if (!cipher_tv->fail) goto out; } - sg_init_one(&sg[0], cipher_tv[i].input, - cipher_tv[i].ilen); + sg_init_one(&sg[0], cipher_tv->input, + cipher_tv->ilen); ablkcipher_request_set_crypt(req, sg, sg, - cipher_tv[i].ilen, - cipher_tv[i].iv); + cipher_tv->ilen, + cipher_tv->iv); ret = enc ? crypto_ablkcipher_encrypt(req) : @@ -553,11 +550,11 @@ static void test_cipher(char *algo, int enc, } q = kmap(sg_page(&sg[0])) + sg[0].offset; - hexdump(q, cipher_tv[i].rlen); + hexdump(q, cipher_tv->rlen); printk("%s\n", - memcmp(q, cipher_tv[i].result, - cipher_tv[i].rlen) ? "fail" : "pass"); + memcmp(q, cipher_tv->result, + cipher_tv->rlen) ? "fail" : "pass"); } } @@ -566,41 +563,42 @@ static void test_cipher(char *algo, int enc, j = 0; for (i = 0; i < tcount; i++) { - if (cipher_tv[i].np) { + memcpy(cipher_tv, &template[i], tsize); + if (cipher_tv->np) { j++; printk("test %u (%d bit key):\n", - j, cipher_tv[i].klen * 8); + j, cipher_tv->klen * 8); crypto_ablkcipher_clear_flags(tfm, ~0); - if (cipher_tv[i].wk) + if (cipher_tv->wk) crypto_ablkcipher_set_flags( tfm, CRYPTO_TFM_REQ_WEAK_KEY); - key = cipher_tv[i].key; + key = cipher_tv->key; ret = crypto_ablkcipher_setkey(tfm, key, - cipher_tv[i].klen); + cipher_tv->klen); if (ret) { printk("setkey() failed flags=%x\n", crypto_ablkcipher_get_flags(tfm)); - if (!cipher_tv[i].fail) + if (!cipher_tv->fail) goto out; } temp = 0; - sg_init_table(sg, cipher_tv[i].np); - for (k = 0; k < cipher_tv[i].np; k++) { + sg_init_table(sg, cipher_tv->np); + for (k = 0; k < cipher_tv->np; k++) { memcpy(&xbuf[IDX[k]], - cipher_tv[i].input + temp, - cipher_tv[i].tap[k]); - temp += cipher_tv[i].tap[k]; + cipher_tv->input + temp, + cipher_tv->tap[k]); + temp += cipher_tv->tap[k]; sg_set_buf(&sg[k], &xbuf[IDX[k]], - cipher_tv[i].tap[k]); + cipher_tv->tap[k]); } ablkcipher_request_set_crypt(req, sg, sg, - cipher_tv[i].ilen, - cipher_tv[i].iv); + cipher_tv->ilen, + cipher_tv->iv); ret = enc ? crypto_ablkcipher_encrypt(req) : @@ -624,15 +622,15 @@ static void test_cipher(char *algo, int enc, } temp = 0; - for (k = 0; k < cipher_tv[i].np; k++) { + for (k = 0; k < cipher_tv->np; k++) { printk("page %u\n", k); q = kmap(sg_page(&sg[k])) + sg[k].offset; - hexdump(q, cipher_tv[i].tap[k]); + hexdump(q, cipher_tv->tap[k]); printk("%s\n", - memcmp(q, cipher_tv[i].result + temp, - cipher_tv[i].tap[k]) ? "fail" : + memcmp(q, cipher_tv->result + temp, + cipher_tv->tap[k]) ? "fail" : "pass"); - temp += cipher_tv[i].tap[k]; + temp += cipher_tv->tap[k]; } } } -- cgit v1.2.3-59-g8ed1b From a773edb3ed0c3288f5ae76adc7d48c934ccfcf8c Mon Sep 17 00:00:00 2001 From: Tan Swee Heng Date: Fri, 30 Nov 2007 00:36:07 +1100 Subject: [CRYPTO] tcrypt: AES CTR large test vector This patch adds a large AES CTR mode test vector. The test vector is 4100 bytes in size. It was generated using a C++ program that called Crypto++. Note that this patch increases considerably the size of "struct cipher_testvec" and hence the size of tcrypt.ko. Signed-off-by: Tan Swee Heng Signed-off-by: Herbert Xu --- crypto/tcrypt.h | 1051 ++++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 1048 insertions(+), 3 deletions(-) diff --git a/crypto/tcrypt.h b/crypto/tcrypt.h index 2384c41a6a08..d9d97a696811 100644 --- a/crypto/tcrypt.h +++ b/crypto/tcrypt.h @@ -43,8 +43,8 @@ struct hash_testvec { struct cipher_testvec { char key[MAX_KEYLEN] __attribute__ ((__aligned__(4))); char iv[MAX_IVLEN]; - char input[512]; - char result[512]; + char input[4100]; + char result[4100]; unsigned char tap[MAX_TAP]; int np; unsigned char fail; @@ -2311,7 +2311,7 @@ static struct cipher_testvec cast6_dec_tv_template[] = { #define AES_LRW_DEC_TEST_VECTORS 8 #define AES_XTS_ENC_TEST_VECTORS 4 #define AES_XTS_DEC_TEST_VECTORS 4 -#define AES_CTR_ENC_TEST_VECTORS 6 +#define AES_CTR_ENC_TEST_VECTORS 7 #define AES_CTR_DEC_TEST_VECTORS 6 #define AES_GCM_ENC_TEST_VECTORS 9 #define AES_GCM_DEC_TEST_VECTORS 8 @@ -3438,6 +3438,1051 @@ static struct cipher_testvec aes_ctr_enc_tv_template[] = { 0xb8, 0x30, 0x6b, 0x50, 0x8f, 0x83, 0x9d, 0x6a, 0x55, 0x30, 0x83, 0x1d, 0x93, 0x44, 0xaf, 0x1c }, .rlen = 32, + }, { + // generated using Crypto++ + .key = { + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, + 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, + 0x00, 0x00, 0x00, 0x00, + }, + .klen = 32 + 4, + .iv = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + }, + .input = { + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, + 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, + 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, + 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, + 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, + 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, + 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, + 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, + 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, + 0x58, 0x59, 0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f, + 0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, + 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, + 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77, + 0x78, 0x79, 0x7a, 0x7b, 0x7c, 0x7d, 0x7e, 0x7f, + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, + 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, + 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, + 0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f, + 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, + 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, + 0xb0, 0xb1, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6, 0xb7, + 0xb8, 0xb9, 0xba, 0xbb, 0xbc, 0xbd, 0xbe, 0xbf, + 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, + 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, + 0xd0, 0xd1, 0xd2, 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, + 0xd8, 0xd9, 0xda, 0xdb, 0xdc, 0xdd, 0xde, 0xdf, + 0xe0, 0xe1, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, + 0xe8, 0xe9, 0xea, 0xeb, 0xec, 0xed, 0xee, 0xef, + 0xf0, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, + 0xf8, 0xf9, 0xfa, 0xfb, 0xfc, 0xfd, 0xfe, 0xff, + 0x00, 0x03, 0x06, 0x09, 0x0c, 0x0f, 0x12, 0x15, + 0x18, 0x1b, 0x1e, 0x21, 0x24, 0x27, 0x2a, 0x2d, + 0x30, 0x33, 0x36, 0x39, 0x3c, 0x3f, 0x42, 0x45, + 0x48, 0x4b, 0x4e, 0x51, 0x54, 0x57, 0x5a, 0x5d, + 0x60, 0x63, 0x66, 0x69, 0x6c, 0x6f, 0x72, 0x75, + 0x78, 0x7b, 0x7e, 0x81, 0x84, 0x87, 0x8a, 0x8d, + 0x90, 0x93, 0x96, 0x99, 0x9c, 0x9f, 0xa2, 0xa5, + 0xa8, 0xab, 0xae, 0xb1, 0xb4, 0xb7, 0xba, 0xbd, + 0xc0, 0xc3, 0xc6, 0xc9, 0xcc, 0xcf, 0xd2, 0xd5, + 0xd8, 0xdb, 0xde, 0xe1, 0xe4, 0xe7, 0xea, 0xed, + 0xf0, 0xf3, 0xf6, 0xf9, 0xfc, 0xff, 0x02, 0x05, + 0x08, 0x0b, 0x0e, 0x11, 0x14, 0x17, 0x1a, 0x1d, + 0x20, 0x23, 0x26, 0x29, 0x2c, 0x2f, 0x32, 0x35, + 0x38, 0x3b, 0x3e, 0x41, 0x44, 0x47, 0x4a, 0x4d, + 0x50, 0x53, 0x56, 0x59, 0x5c, 0x5f, 0x62, 0x65, + 0x68, 0x6b, 0x6e, 0x71, 0x74, 0x77, 0x7a, 0x7d, + 0x80, 0x83, 0x86, 0x89, 0x8c, 0x8f, 0x92, 0x95, + 0x98, 0x9b, 0x9e, 0xa1, 0xa4, 0xa7, 0xaa, 0xad, + 0xb0, 0xb3, 0xb6, 0xb9, 0xbc, 0xbf, 0xc2, 0xc5, + 0xc8, 0xcb, 0xce, 0xd1, 0xd4, 0xd7, 0xda, 0xdd, + 0xe0, 0xe3, 0xe6, 0xe9, 0xec, 0xef, 0xf2, 0xf5, + 0xf8, 0xfb, 0xfe, 0x01, 0x04, 0x07, 0x0a, 0x0d, + 0x10, 0x13, 0x16, 0x19, 0x1c, 0x1f, 0x22, 0x25, + 0x28, 0x2b, 0x2e, 0x31, 0x34, 0x37, 0x3a, 0x3d, + 0x40, 0x43, 0x46, 0x49, 0x4c, 0x4f, 0x52, 0x55, + 0x58, 0x5b, 0x5e, 0x61, 0x64, 0x67, 0x6a, 0x6d, + 0x70, 0x73, 0x76, 0x79, 0x7c, 0x7f, 0x82, 0x85, + 0x88, 0x8b, 0x8e, 0x91, 0x94, 0x97, 0x9a, 0x9d, + 0xa0, 0xa3, 0xa6, 0xa9, 0xac, 0xaf, 0xb2, 0xb5, + 0xb8, 0xbb, 0xbe, 0xc1, 0xc4, 0xc7, 0xca, 0xcd, + 0xd0, 0xd3, 0xd6, 0xd9, 0xdc, 0xdf, 0xe2, 0xe5, + 0xe8, 0xeb, 0xee, 0xf1, 0xf4, 0xf7, 0xfa, 0xfd, + 0x00, 0x05, 0x0a, 0x0f, 0x14, 0x19, 0x1e, 0x23, + 0x28, 0x2d, 0x32, 0x37, 0x3c, 0x41, 0x46, 0x4b, + 0x50, 0x55, 0x5a, 0x5f, 0x64, 0x69, 0x6e, 0x73, + 0x78, 0x7d, 0x82, 0x87, 0x8c, 0x91, 0x96, 0x9b, + 0xa0, 0xa5, 0xaa, 0xaf, 0xb4, 0xb9, 0xbe, 0xc3, + 0xc8, 0xcd, 0xd2, 0xd7, 0xdc, 0xe1, 0xe6, 0xeb, + 0xf0, 0xf5, 0xfa, 0xff, 0x04, 0x09, 0x0e, 0x13, + 0x18, 0x1d, 0x22, 0x27, 0x2c, 0x31, 0x36, 0x3b, + 0x40, 0x45, 0x4a, 0x4f, 0x54, 0x59, 0x5e, 0x63, + 0x68, 0x6d, 0x72, 0x77, 0x7c, 0x81, 0x86, 0x8b, + 0x90, 0x95, 0x9a, 0x9f, 0xa4, 0xa9, 0xae, 0xb3, + 0xb8, 0xbd, 0xc2, 0xc7, 0xcc, 0xd1, 0xd6, 0xdb, + 0xe0, 0xe5, 0xea, 0xef, 0xf4, 0xf9, 0xfe, 0x03, + 0x08, 0x0d, 0x12, 0x17, 0x1c, 0x21, 0x26, 0x2b, + 0x30, 0x35, 0x3a, 0x3f, 0x44, 0x49, 0x4e, 0x53, + 0x58, 0x5d, 0x62, 0x67, 0x6c, 0x71, 0x76, 0x7b, + 0x80, 0x85, 0x8a, 0x8f, 0x94, 0x99, 0x9e, 0xa3, + 0xa8, 0xad, 0xb2, 0xb7, 0xbc, 0xc1, 0xc6, 0xcb, + 0xd0, 0xd5, 0xda, 0xdf, 0xe4, 0xe9, 0xee, 0xf3, + 0xf8, 0xfd, 0x02, 0x07, 0x0c, 0x11, 0x16, 0x1b, + 0x20, 0x25, 0x2a, 0x2f, 0x34, 0x39, 0x3e, 0x43, + 0x48, 0x4d, 0x52, 0x57, 0x5c, 0x61, 0x66, 0x6b, + 0x70, 0x75, 0x7a, 0x7f, 0x84, 0x89, 0x8e, 0x93, + 0x98, 0x9d, 0xa2, 0xa7, 0xac, 0xb1, 0xb6, 0xbb, + 0xc0, 0xc5, 0xca, 0xcf, 0xd4, 0xd9, 0xde, 0xe3, + 0xe8, 0xed, 0xf2, 0xf7, 0xfc, 0x01, 0x06, 0x0b, + 0x10, 0x15, 0x1a, 0x1f, 0x24, 0x29, 0x2e, 0x33, + 0x38, 0x3d, 0x42, 0x47, 0x4c, 0x51, 0x56, 0x5b, + 0x60, 0x65, 0x6a, 0x6f, 0x74, 0x79, 0x7e, 0x83, + 0x88, 0x8d, 0x92, 0x97, 0x9c, 0xa1, 0xa6, 0xab, + 0xb0, 0xb5, 0xba, 0xbf, 0xc4, 0xc9, 0xce, 0xd3, + 0xd8, 0xdd, 0xe2, 0xe7, 0xec, 0xf1, 0xf6, 0xfb, + 0x00, 0x07, 0x0e, 0x15, 0x1c, 0x23, 0x2a, 0x31, + 0x38, 0x3f, 0x46, 0x4d, 0x54, 0x5b, 0x62, 0x69, + 0x70, 0x77, 0x7e, 0x85, 0x8c, 0x93, 0x9a, 0xa1, + 0xa8, 0xaf, 0xb6, 0xbd, 0xc4, 0xcb, 0xd2, 0xd9, + 0xe0, 0xe7, 0xee, 0xf5, 0xfc, 0x03, 0x0a, 0x11, + 0x18, 0x1f, 0x26, 0x2d, 0x34, 0x3b, 0x42, 0x49, + 0x50, 0x57, 0x5e, 0x65, 0x6c, 0x73, 0x7a, 0x81, + 0x88, 0x8f, 0x96, 0x9d, 0xa4, 0xab, 0xb2, 0xb9, + 0xc0, 0xc7, 0xce, 0xd5, 0xdc, 0xe3, 0xea, 0xf1, + 0xf8, 0xff, 0x06, 0x0d, 0x14, 0x1b, 0x22, 0x29, + 0x30, 0x37, 0x3e, 0x45, 0x4c, 0x53, 0x5a, 0x61, + 0x68, 0x6f, 0x76, 0x7d, 0x84, 0x8b, 0x92, 0x99, + 0xa0, 0xa7, 0xae, 0xb5, 0xbc, 0xc3, 0xca, 0xd1, + 0xd8, 0xdf, 0xe6, 0xed, 0xf4, 0xfb, 0x02, 0x09, + 0x10, 0x17, 0x1e, 0x25, 0x2c, 0x33, 0x3a, 0x41, + 0x48, 0x4f, 0x56, 0x5d, 0x64, 0x6b, 0x72, 0x79, + 0x80, 0x87, 0x8e, 0x95, 0x9c, 0xa3, 0xaa, 0xb1, + 0xb8, 0xbf, 0xc6, 0xcd, 0xd4, 0xdb, 0xe2, 0xe9, + 0xf0, 0xf7, 0xfe, 0x05, 0x0c, 0x13, 0x1a, 0x21, + 0x28, 0x2f, 0x36, 0x3d, 0x44, 0x4b, 0x52, 0x59, + 0x60, 0x67, 0x6e, 0x75, 0x7c, 0x83, 0x8a, 0x91, + 0x98, 0x9f, 0xa6, 0xad, 0xb4, 0xbb, 0xc2, 0xc9, + 0xd0, 0xd7, 0xde, 0xe5, 0xec, 0xf3, 0xfa, 0x01, + 0x08, 0x0f, 0x16, 0x1d, 0x24, 0x2b, 0x32, 0x39, + 0x40, 0x47, 0x4e, 0x55, 0x5c, 0x63, 0x6a, 0x71, + 0x78, 0x7f, 0x86, 0x8d, 0x94, 0x9b, 0xa2, 0xa9, + 0xb0, 0xb7, 0xbe, 0xc5, 0xcc, 0xd3, 0xda, 0xe1, + 0xe8, 0xef, 0xf6, 0xfd, 0x04, 0x0b, 0x12, 0x19, + 0x20, 0x27, 0x2e, 0x35, 0x3c, 0x43, 0x4a, 0x51, + 0x58, 0x5f, 0x66, 0x6d, 0x74, 0x7b, 0x82, 0x89, + 0x90, 0x97, 0x9e, 0xa5, 0xac, 0xb3, 0xba, 0xc1, + 0xc8, 0xcf, 0xd6, 0xdd, 0xe4, 0xeb, 0xf2, 0xf9, + 0x00, 0x09, 0x12, 0x1b, 0x24, 0x2d, 0x36, 0x3f, + 0x48, 0x51, 0x5a, 0x63, 0x6c, 0x75, 0x7e, 0x87, + 0x90, 0x99, 0xa2, 0xab, 0xb4, 0xbd, 0xc6, 0xcf, + 0xd8, 0xe1, 0xea, 0xf3, 0xfc, 0x05, 0x0e, 0x17, + 0x20, 0x29, 0x32, 0x3b, 0x44, 0x4d, 0x56, 0x5f, + 0x68, 0x71, 0x7a, 0x83, 0x8c, 0x95, 0x9e, 0xa7, + 0xb0, 0xb9, 0xc2, 0xcb, 0xd4, 0xdd, 0xe6, 0xef, + 0xf8, 0x01, 0x0a, 0x13, 0x1c, 0x25, 0x2e, 0x37, + 0x40, 0x49, 0x52, 0x5b, 0x64, 0x6d, 0x76, 0x7f, + 0x88, 0x91, 0x9a, 0xa3, 0xac, 0xb5, 0xbe, 0xc7, + 0xd0, 0xd9, 0xe2, 0xeb, 0xf4, 0xfd, 0x06, 0x0f, + 0x18, 0x21, 0x2a, 0x33, 0x3c, 0x45, 0x4e, 0x57, + 0x60, 0x69, 0x72, 0x7b, 0x84, 0x8d, 0x96, 0x9f, + 0xa8, 0xb1, 0xba, 0xc3, 0xcc, 0xd5, 0xde, 0xe7, + 0xf0, 0xf9, 0x02, 0x0b, 0x14, 0x1d, 0x26, 0x2f, + 0x38, 0x41, 0x4a, 0x53, 0x5c, 0x65, 0x6e, 0x77, + 0x80, 0x89, 0x92, 0x9b, 0xa4, 0xad, 0xb6, 0xbf, + 0xc8, 0xd1, 0xda, 0xe3, 0xec, 0xf5, 0xfe, 0x07, + 0x10, 0x19, 0x22, 0x2b, 0x34, 0x3d, 0x46, 0x4f, + 0x58, 0x61, 0x6a, 0x73, 0x7c, 0x85, 0x8e, 0x97, + 0xa0, 0xa9, 0xb2, 0xbb, 0xc4, 0xcd, 0xd6, 0xdf, + 0xe8, 0xf1, 0xfa, 0x03, 0x0c, 0x15, 0x1e, 0x27, + 0x30, 0x39, 0x42, 0x4b, 0x54, 0x5d, 0x66, 0x6f, + 0x78, 0x81, 0x8a, 0x93, 0x9c, 0xa5, 0xae, 0xb7, + 0xc0, 0xc9, 0xd2, 0xdb, 0xe4, 0xed, 0xf6, 0xff, + 0x08, 0x11, 0x1a, 0x23, 0x2c, 0x35, 0x3e, 0x47, + 0x50, 0x59, 0x62, 0x6b, 0x74, 0x7d, 0x86, 0x8f, + 0x98, 0xa1, 0xaa, 0xb3, 0xbc, 0xc5, 0xce, 0xd7, + 0xe0, 0xe9, 0xf2, 0xfb, 0x04, 0x0d, 0x16, 0x1f, + 0x28, 0x31, 0x3a, 0x43, 0x4c, 0x55, 0x5e, 0x67, + 0x70, 0x79, 0x82, 0x8b, 0x94, 0x9d, 0xa6, 0xaf, + 0xb8, 0xc1, 0xca, 0xd3, 0xdc, 0xe5, 0xee, 0xf7, + 0x00, 0x0b, 0x16, 0x21, 0x2c, 0x37, 0x42, 0x4d, + 0x58, 0x63, 0x6e, 0x79, 0x84, 0x8f, 0x9a, 0xa5, + 0xb0, 0xbb, 0xc6, 0xd1, 0xdc, 0xe7, 0xf2, 0xfd, + 0x08, 0x13, 0x1e, 0x29, 0x34, 0x3f, 0x4a, 0x55, + 0x60, 0x6b, 0x76, 0x81, 0x8c, 0x97, 0xa2, 0xad, + 0xb8, 0xc3, 0xce, 0xd9, 0xe4, 0xef, 0xfa, 0x05, + 0x10, 0x1b, 0x26, 0x31, 0x3c, 0x47, 0x52, 0x5d, + 0x68, 0x73, 0x7e, 0x89, 0x94, 0x9f, 0xaa, 0xb5, + 0xc0, 0xcb, 0xd6, 0xe1, 0xec, 0xf7, 0x02, 0x0d, + 0x18, 0x23, 0x2e, 0x39, 0x44, 0x4f, 0x5a, 0x65, + 0x70, 0x7b, 0x86, 0x91, 0x9c, 0xa7, 0xb2, 0xbd, + 0xc8, 0xd3, 0xde, 0xe9, 0xf4, 0xff, 0x0a, 0x15, + 0x20, 0x2b, 0x36, 0x41, 0x4c, 0x57, 0x62, 0x6d, + 0x78, 0x83, 0x8e, 0x99, 0xa4, 0xaf, 0xba, 0xc5, + 0xd0, 0xdb, 0xe6, 0xf1, 0xfc, 0x07, 0x12, 0x1d, + 0x28, 0x33, 0x3e, 0x49, 0x54, 0x5f, 0x6a, 0x75, + 0x80, 0x8b, 0x96, 0xa1, 0xac, 0xb7, 0xc2, 0xcd, + 0xd8, 0xe3, 0xee, 0xf9, 0x04, 0x0f, 0x1a, 0x25, + 0x30, 0x3b, 0x46, 0x51, 0x5c, 0x67, 0x72, 0x7d, + 0x88, 0x93, 0x9e, 0xa9, 0xb4, 0xbf, 0xca, 0xd5, + 0xe0, 0xeb, 0xf6, 0x01, 0x0c, 0x17, 0x22, 0x2d, + 0x38, 0x43, 0x4e, 0x59, 0x64, 0x6f, 0x7a, 0x85, + 0x90, 0x9b, 0xa6, 0xb1, 0xbc, 0xc7, 0xd2, 0xdd, + 0xe8, 0xf3, 0xfe, 0x09, 0x14, 0x1f, 0x2a, 0x35, + 0x40, 0x4b, 0x56, 0x61, 0x6c, 0x77, 0x82, 0x8d, + 0x98, 0xa3, 0xae, 0xb9, 0xc4, 0xcf, 0xda, 0xe5, + 0xf0, 0xfb, 0x06, 0x11, 0x1c, 0x27, 0x32, 0x3d, + 0x48, 0x53, 0x5e, 0x69, 0x74, 0x7f, 0x8a, 0x95, + 0xa0, 0xab, 0xb6, 0xc1, 0xcc, 0xd7, 0xe2, 0xed, + 0xf8, 0x03, 0x0e, 0x19, 0x24, 0x2f, 0x3a, 0x45, + 0x50, 0x5b, 0x66, 0x71, 0x7c, 0x87, 0x92, 0x9d, + 0xa8, 0xb3, 0xbe, 0xc9, 0xd4, 0xdf, 0xea, 0xf5, + 0x00, 0x0d, 0x1a, 0x27, 0x34, 0x41, 0x4e, 0x5b, + 0x68, 0x75, 0x82, 0x8f, 0x9c, 0xa9, 0xb6, 0xc3, + 0xd0, 0xdd, 0xea, 0xf7, 0x04, 0x11, 0x1e, 0x2b, + 0x38, 0x45, 0x52, 0x5f, 0x6c, 0x79, 0x86, 0x93, + 0xa0, 0xad, 0xba, 0xc7, 0xd4, 0xe1, 0xee, 0xfb, + 0x08, 0x15, 0x22, 0x2f, 0x3c, 0x49, 0x56, 0x63, + 0x70, 0x7d, 0x8a, 0x97, 0xa4, 0xb1, 0xbe, 0xcb, + 0xd8, 0xe5, 0xf2, 0xff, 0x0c, 0x19, 0x26, 0x33, + 0x40, 0x4d, 0x5a, 0x67, 0x74, 0x81, 0x8e, 0x9b, + 0xa8, 0xb5, 0xc2, 0xcf, 0xdc, 0xe9, 0xf6, 0x03, + 0x10, 0x1d, 0x2a, 0x37, 0x44, 0x51, 0x5e, 0x6b, + 0x78, 0x85, 0x92, 0x9f, 0xac, 0xb9, 0xc6, 0xd3, + 0xe0, 0xed, 0xfa, 0x07, 0x14, 0x21, 0x2e, 0x3b, + 0x48, 0x55, 0x62, 0x6f, 0x7c, 0x89, 0x96, 0xa3, + 0xb0, 0xbd, 0xca, 0xd7, 0xe4, 0xf1, 0xfe, 0x0b, + 0x18, 0x25, 0x32, 0x3f, 0x4c, 0x59, 0x66, 0x73, + 0x80, 0x8d, 0x9a, 0xa7, 0xb4, 0xc1, 0xce, 0xdb, + 0xe8, 0xf5, 0x02, 0x0f, 0x1c, 0x29, 0x36, 0x43, + 0x50, 0x5d, 0x6a, 0x77, 0x84, 0x91, 0x9e, 0xab, + 0xb8, 0xc5, 0xd2, 0xdf, 0xec, 0xf9, 0x06, 0x13, + 0x20, 0x2d, 0x3a, 0x47, 0x54, 0x61, 0x6e, 0x7b, + 0x88, 0x95, 0xa2, 0xaf, 0xbc, 0xc9, 0xd6, 0xe3, + 0xf0, 0xfd, 0x0a, 0x17, 0x24, 0x31, 0x3e, 0x4b, + 0x58, 0x65, 0x72, 0x7f, 0x8c, 0x99, 0xa6, 0xb3, + 0xc0, 0xcd, 0xda, 0xe7, 0xf4, 0x01, 0x0e, 0x1b, + 0x28, 0x35, 0x42, 0x4f, 0x5c, 0x69, 0x76, 0x83, + 0x90, 0x9d, 0xaa, 0xb7, 0xc4, 0xd1, 0xde, 0xeb, + 0xf8, 0x05, 0x12, 0x1f, 0x2c, 0x39, 0x46, 0x53, + 0x60, 0x6d, 0x7a, 0x87, 0x94, 0xa1, 0xae, 0xbb, + 0xc8, 0xd5, 0xe2, 0xef, 0xfc, 0x09, 0x16, 0x23, + 0x30, 0x3d, 0x4a, 0x57, 0x64, 0x71, 0x7e, 0x8b, + 0x98, 0xa5, 0xb2, 0xbf, 0xcc, 0xd9, 0xe6, 0xf3, + 0x00, 0x0f, 0x1e, 0x2d, 0x3c, 0x4b, 0x5a, 0x69, + 0x78, 0x87, 0x96, 0xa5, 0xb4, 0xc3, 0xd2, 0xe1, + 0xf0, 0xff, 0x0e, 0x1d, 0x2c, 0x3b, 0x4a, 0x59, + 0x68, 0x77, 0x86, 0x95, 0xa4, 0xb3, 0xc2, 0xd1, + 0xe0, 0xef, 0xfe, 0x0d, 0x1c, 0x2b, 0x3a, 0x49, + 0x58, 0x67, 0x76, 0x85, 0x94, 0xa3, 0xb2, 0xc1, + 0xd0, 0xdf, 0xee, 0xfd, 0x0c, 0x1b, 0x2a, 0x39, + 0x48, 0x57, 0x66, 0x75, 0x84, 0x93, 0xa2, 0xb1, + 0xc0, 0xcf, 0xde, 0xed, 0xfc, 0x0b, 0x1a, 0x29, + 0x38, 0x47, 0x56, 0x65, 0x74, 0x83, 0x92, 0xa1, + 0xb0, 0xbf, 0xce, 0xdd, 0xec, 0xfb, 0x0a, 0x19, + 0x28, 0x37, 0x46, 0x55, 0x64, 0x73, 0x82, 0x91, + 0xa0, 0xaf, 0xbe, 0xcd, 0xdc, 0xeb, 0xfa, 0x09, + 0x18, 0x27, 0x36, 0x45, 0x54, 0x63, 0x72, 0x81, + 0x90, 0x9f, 0xae, 0xbd, 0xcc, 0xdb, 0xea, 0xf9, + 0x08, 0x17, 0x26, 0x35, 0x44, 0x53, 0x62, 0x71, + 0x80, 0x8f, 0x9e, 0xad, 0xbc, 0xcb, 0xda, 0xe9, + 0xf8, 0x07, 0x16, 0x25, 0x34, 0x43, 0x52, 0x61, + 0x70, 0x7f, 0x8e, 0x9d, 0xac, 0xbb, 0xca, 0xd9, + 0xe8, 0xf7, 0x06, 0x15, 0x24, 0x33, 0x42, 0x51, + 0x60, 0x6f, 0x7e, 0x8d, 0x9c, 0xab, 0xba, 0xc9, + 0xd8, 0xe7, 0xf6, 0x05, 0x14, 0x23, 0x32, 0x41, + 0x50, 0x5f, 0x6e, 0x7d, 0x8c, 0x9b, 0xaa, 0xb9, + 0xc8, 0xd7, 0xe6, 0xf5, 0x04, 0x13, 0x22, 0x31, + 0x40, 0x4f, 0x5e, 0x6d, 0x7c, 0x8b, 0x9a, 0xa9, + 0xb8, 0xc7, 0xd6, 0xe5, 0xf4, 0x03, 0x12, 0x21, + 0x30, 0x3f, 0x4e, 0x5d, 0x6c, 0x7b, 0x8a, 0x99, + 0xa8, 0xb7, 0xc6, 0xd5, 0xe4, 0xf3, 0x02, 0x11, + 0x20, 0x2f, 0x3e, 0x4d, 0x5c, 0x6b, 0x7a, 0x89, + 0x98, 0xa7, 0xb6, 0xc5, 0xd4, 0xe3, 0xf2, 0x01, + 0x10, 0x1f, 0x2e, 0x3d, 0x4c, 0x5b, 0x6a, 0x79, + 0x88, 0x97, 0xa6, 0xb5, 0xc4, 0xd3, 0xe2, 0xf1, + 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, + 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff, + 0x10, 0x21, 0x32, 0x43, 0x54, 0x65, 0x76, 0x87, + 0x98, 0xa9, 0xba, 0xcb, 0xdc, 0xed, 0xfe, 0x0f, + 0x20, 0x31, 0x42, 0x53, 0x64, 0x75, 0x86, 0x97, + 0xa8, 0xb9, 0xca, 0xdb, 0xec, 0xfd, 0x0e, 0x1f, + 0x30, 0x41, 0x52, 0x63, 0x74, 0x85, 0x96, 0xa7, + 0xb8, 0xc9, 0xda, 0xeb, 0xfc, 0x0d, 0x1e, 0x2f, + 0x40, 0x51, 0x62, 0x73, 0x84, 0x95, 0xa6, 0xb7, + 0xc8, 0xd9, 0xea, 0xfb, 0x0c, 0x1d, 0x2e, 0x3f, + 0x50, 0x61, 0x72, 0x83, 0x94, 0xa5, 0xb6, 0xc7, + 0xd8, 0xe9, 0xfa, 0x0b, 0x1c, 0x2d, 0x3e, 0x4f, + 0x60, 0x71, 0x82, 0x93, 0xa4, 0xb5, 0xc6, 0xd7, + 0xe8, 0xf9, 0x0a, 0x1b, 0x2c, 0x3d, 0x4e, 0x5f, + 0x70, 0x81, 0x92, 0xa3, 0xb4, 0xc5, 0xd6, 0xe7, + 0xf8, 0x09, 0x1a, 0x2b, 0x3c, 0x4d, 0x5e, 0x6f, + 0x80, 0x91, 0xa2, 0xb3, 0xc4, 0xd5, 0xe6, 0xf7, + 0x08, 0x19, 0x2a, 0x3b, 0x4c, 0x5d, 0x6e, 0x7f, + 0x90, 0xa1, 0xb2, 0xc3, 0xd4, 0xe5, 0xf6, 0x07, + 0x18, 0x29, 0x3a, 0x4b, 0x5c, 0x6d, 0x7e, 0x8f, + 0xa0, 0xb1, 0xc2, 0xd3, 0xe4, 0xf5, 0x06, 0x17, + 0x28, 0x39, 0x4a, 0x5b, 0x6c, 0x7d, 0x8e, 0x9f, + 0xb0, 0xc1, 0xd2, 0xe3, 0xf4, 0x05, 0x16, 0x27, + 0x38, 0x49, 0x5a, 0x6b, 0x7c, 0x8d, 0x9e, 0xaf, + 0xc0, 0xd1, 0xe2, 0xf3, 0x04, 0x15, 0x26, 0x37, + 0x48, 0x59, 0x6a, 0x7b, 0x8c, 0x9d, 0xae, 0xbf, + 0xd0, 0xe1, 0xf2, 0x03, 0x14, 0x25, 0x36, 0x47, + 0x58, 0x69, 0x7a, 0x8b, 0x9c, 0xad, 0xbe, 0xcf, + 0xe0, 0xf1, 0x02, 0x13, 0x24, 0x35, 0x46, 0x57, + 0x68, 0x79, 0x8a, 0x9b, 0xac, 0xbd, 0xce, 0xdf, + 0xf0, 0x01, 0x12, 0x23, 0x34, 0x45, 0x56, 0x67, + 0x78, 0x89, 0x9a, 0xab, 0xbc, 0xcd, 0xde, 0xef, + 0x00, 0x13, 0x26, 0x39, 0x4c, 0x5f, 0x72, 0x85, + 0x98, 0xab, 0xbe, 0xd1, 0xe4, 0xf7, 0x0a, 0x1d, + 0x30, 0x43, 0x56, 0x69, 0x7c, 0x8f, 0xa2, 0xb5, + 0xc8, 0xdb, 0xee, 0x01, 0x14, 0x27, 0x3a, 0x4d, + 0x60, 0x73, 0x86, 0x99, 0xac, 0xbf, 0xd2, 0xe5, + 0xf8, 0x0b, 0x1e, 0x31, 0x44, 0x57, 0x6a, 0x7d, + 0x90, 0xa3, 0xb6, 0xc9, 0xdc, 0xef, 0x02, 0x15, + 0x28, 0x3b, 0x4e, 0x61, 0x74, 0x87, 0x9a, 0xad, + 0xc0, 0xd3, 0xe6, 0xf9, 0x0c, 0x1f, 0x32, 0x45, + 0x58, 0x6b, 0x7e, 0x91, 0xa4, 0xb7, 0xca, 0xdd, + 0xf0, 0x03, 0x16, 0x29, 0x3c, 0x4f, 0x62, 0x75, + 0x88, 0x9b, 0xae, 0xc1, 0xd4, 0xe7, 0xfa, 0x0d, + 0x20, 0x33, 0x46, 0x59, 0x6c, 0x7f, 0x92, 0xa5, + 0xb8, 0xcb, 0xde, 0xf1, 0x04, 0x17, 0x2a, 0x3d, + 0x50, 0x63, 0x76, 0x89, 0x9c, 0xaf, 0xc2, 0xd5, + 0xe8, 0xfb, 0x0e, 0x21, 0x34, 0x47, 0x5a, 0x6d, + 0x80, 0x93, 0xa6, 0xb9, 0xcc, 0xdf, 0xf2, 0x05, + 0x18, 0x2b, 0x3e, 0x51, 0x64, 0x77, 0x8a, 0x9d, + 0xb0, 0xc3, 0xd6, 0xe9, 0xfc, 0x0f, 0x22, 0x35, + 0x48, 0x5b, 0x6e, 0x81, 0x94, 0xa7, 0xba, 0xcd, + 0xe0, 0xf3, 0x06, 0x19, 0x2c, 0x3f, 0x52, 0x65, + 0x78, 0x8b, 0x9e, 0xb1, 0xc4, 0xd7, 0xea, 0xfd, + 0x10, 0x23, 0x36, 0x49, 0x5c, 0x6f, 0x82, 0x95, + 0xa8, 0xbb, 0xce, 0xe1, 0xf4, 0x07, 0x1a, 0x2d, + 0x40, 0x53, 0x66, 0x79, 0x8c, 0x9f, 0xb2, 0xc5, + 0xd8, 0xeb, 0xfe, 0x11, 0x24, 0x37, 0x4a, 0x5d, + 0x70, 0x83, 0x96, 0xa9, 0xbc, 0xcf, 0xe2, 0xf5, + 0x08, 0x1b, 0x2e, 0x41, 0x54, 0x67, 0x7a, 0x8d, + 0xa0, 0xb3, 0xc6, 0xd9, 0xec, 0xff, 0x12, 0x25, + 0x38, 0x4b, 0x5e, 0x71, 0x84, 0x97, 0xaa, 0xbd, + 0xd0, 0xe3, 0xf6, 0x09, 0x1c, 0x2f, 0x42, 0x55, + 0x68, 0x7b, 0x8e, 0xa1, 0xb4, 0xc7, 0xda, 0xed, + 0x00, 0x15, 0x2a, 0x3f, 0x54, 0x69, 0x7e, 0x93, + 0xa8, 0xbd, 0xd2, 0xe7, 0xfc, 0x11, 0x26, 0x3b, + 0x50, 0x65, 0x7a, 0x8f, 0xa4, 0xb9, 0xce, 0xe3, + 0xf8, 0x0d, 0x22, 0x37, 0x4c, 0x61, 0x76, 0x8b, + 0xa0, 0xb5, 0xca, 0xdf, 0xf4, 0x09, 0x1e, 0x33, + 0x48, 0x5d, 0x72, 0x87, 0x9c, 0xb1, 0xc6, 0xdb, + 0xf0, 0x05, 0x1a, 0x2f, 0x44, 0x59, 0x6e, 0x83, + 0x98, 0xad, 0xc2, 0xd7, 0xec, 0x01, 0x16, 0x2b, + 0x40, 0x55, 0x6a, 0x7f, 0x94, 0xa9, 0xbe, 0xd3, + 0xe8, 0xfd, 0x12, 0x27, 0x3c, 0x51, 0x66, 0x7b, + 0x90, 0xa5, 0xba, 0xcf, 0xe4, 0xf9, 0x0e, 0x23, + 0x38, 0x4d, 0x62, 0x77, 0x8c, 0xa1, 0xb6, 0xcb, + 0xe0, 0xf5, 0x0a, 0x1f, 0x34, 0x49, 0x5e, 0x73, + 0x88, 0x9d, 0xb2, 0xc7, 0xdc, 0xf1, 0x06, 0x1b, + 0x30, 0x45, 0x5a, 0x6f, 0x84, 0x99, 0xae, 0xc3, + 0xd8, 0xed, 0x02, 0x17, 0x2c, 0x41, 0x56, 0x6b, + 0x80, 0x95, 0xaa, 0xbf, 0xd4, 0xe9, 0xfe, 0x13, + 0x28, 0x3d, 0x52, 0x67, 0x7c, 0x91, 0xa6, 0xbb, + 0xd0, 0xe5, 0xfa, 0x0f, 0x24, 0x39, 0x4e, 0x63, + 0x78, 0x8d, 0xa2, 0xb7, 0xcc, 0xe1, 0xf6, 0x0b, + 0x20, 0x35, 0x4a, 0x5f, 0x74, 0x89, 0x9e, 0xb3, + 0xc8, 0xdd, 0xf2, 0x07, 0x1c, 0x31, 0x46, 0x5b, + 0x70, 0x85, 0x9a, 0xaf, 0xc4, 0xd9, 0xee, 0x03, + 0x18, 0x2d, 0x42, 0x57, 0x6c, 0x81, 0x96, 0xab, + 0xc0, 0xd5, 0xea, 0xff, 0x14, 0x29, 0x3e, 0x53, + 0x68, 0x7d, 0x92, 0xa7, 0xbc, 0xd1, 0xe6, 0xfb, + 0x10, 0x25, 0x3a, 0x4f, 0x64, 0x79, 0x8e, 0xa3, + 0xb8, 0xcd, 0xe2, 0xf7, 0x0c, 0x21, 0x36, 0x4b, + 0x60, 0x75, 0x8a, 0x9f, 0xb4, 0xc9, 0xde, 0xf3, + 0x08, 0x1d, 0x32, 0x47, 0x5c, 0x71, 0x86, 0x9b, + 0xb0, 0xc5, 0xda, 0xef, 0x04, 0x19, 0x2e, 0x43, + 0x58, 0x6d, 0x82, 0x97, 0xac, 0xc1, 0xd6, 0xeb, + 0x00, 0x17, 0x2e, 0x45, 0x5c, 0x73, 0x8a, 0xa1, + 0xb8, 0xcf, 0xe6, 0xfd, 0x14, 0x2b, 0x42, 0x59, + 0x70, 0x87, 0x9e, 0xb5, 0xcc, 0xe3, 0xfa, 0x11, + 0x28, 0x3f, 0x56, 0x6d, 0x84, 0x9b, 0xb2, 0xc9, + 0xe0, 0xf7, 0x0e, 0x25, 0x3c, 0x53, 0x6a, 0x81, + 0x98, 0xaf, 0xc6, 0xdd, 0xf4, 0x0b, 0x22, 0x39, + 0x50, 0x67, 0x7e, 0x95, 0xac, 0xc3, 0xda, 0xf1, + 0x08, 0x1f, 0x36, 0x4d, 0x64, 0x7b, 0x92, 0xa9, + 0xc0, 0xd7, 0xee, 0x05, 0x1c, 0x33, 0x4a, 0x61, + 0x78, 0x8f, 0xa6, 0xbd, 0xd4, 0xeb, 0x02, 0x19, + 0x30, 0x47, 0x5e, 0x75, 0x8c, 0xa3, 0xba, 0xd1, + 0xe8, 0xff, 0x16, 0x2d, 0x44, 0x5b, 0x72, 0x89, + 0xa0, 0xb7, 0xce, 0xe5, 0xfc, 0x13, 0x2a, 0x41, + 0x58, 0x6f, 0x86, 0x9d, 0xb4, 0xcb, 0xe2, 0xf9, + 0x10, 0x27, 0x3e, 0x55, 0x6c, 0x83, 0x9a, 0xb1, + 0xc8, 0xdf, 0xf6, 0x0d, 0x24, 0x3b, 0x52, 0x69, + 0x80, 0x97, 0xae, 0xc5, 0xdc, 0xf3, 0x0a, 0x21, + 0x38, 0x4f, 0x66, 0x7d, 0x94, 0xab, 0xc2, 0xd9, + 0xf0, 0x07, 0x1e, 0x35, 0x4c, 0x63, 0x7a, 0x91, + 0xa8, 0xbf, 0xd6, 0xed, 0x04, 0x1b, 0x32, 0x49, + 0x60, 0x77, 0x8e, 0xa5, 0xbc, 0xd3, 0xea, 0x01, + 0x18, 0x2f, 0x46, 0x5d, 0x74, 0x8b, 0xa2, 0xb9, + 0xd0, 0xe7, 0xfe, 0x15, 0x2c, 0x43, 0x5a, 0x71, + 0x88, 0x9f, 0xb6, 0xcd, 0xe4, 0xfb, 0x12, 0x29, + 0x40, 0x57, 0x6e, 0x85, 0x9c, 0xb3, 0xca, 0xe1, + 0xf8, 0x0f, 0x26, 0x3d, 0x54, 0x6b, 0x82, 0x99, + 0xb0, 0xc7, 0xde, 0xf5, 0x0c, 0x23, 0x3a, 0x51, + 0x68, 0x7f, 0x96, 0xad, 0xc4, 0xdb, 0xf2, 0x09, + 0x20, 0x37, 0x4e, 0x65, 0x7c, 0x93, 0xaa, 0xc1, + 0xd8, 0xef, 0x06, 0x1d, 0x34, 0x4b, 0x62, 0x79, + 0x90, 0xa7, 0xbe, 0xd5, 0xec, 0x03, 0x1a, 0x31, + 0x48, 0x5f, 0x76, 0x8d, 0xa4, 0xbb, 0xd2, 0xe9, + 0x00, 0x19, 0x32, 0x4b, 0x64, 0x7d, 0x96, 0xaf, + 0xc8, 0xe1, 0xfa, 0x13, 0x2c, 0x45, 0x5e, 0x77, + 0x90, 0xa9, 0xc2, 0xdb, 0xf4, 0x0d, 0x26, 0x3f, + 0x58, 0x71, 0x8a, 0xa3, 0xbc, 0xd5, 0xee, 0x07, + 0x20, 0x39, 0x52, 0x6b, 0x84, 0x9d, 0xb6, 0xcf, + 0xe8, 0x01, 0x1a, 0x33, 0x4c, 0x65, 0x7e, 0x97, + 0xb0, 0xc9, 0xe2, 0xfb, 0x14, 0x2d, 0x46, 0x5f, + 0x78, 0x91, 0xaa, 0xc3, 0xdc, 0xf5, 0x0e, 0x27, + 0x40, 0x59, 0x72, 0x8b, 0xa4, 0xbd, 0xd6, 0xef, + 0x08, 0x21, 0x3a, 0x53, 0x6c, 0x85, 0x9e, 0xb7, + 0xd0, 0xe9, 0x02, 0x1b, 0x34, 0x4d, 0x66, 0x7f, + 0x98, 0xb1, 0xca, 0xe3, 0xfc, 0x15, 0x2e, 0x47, + 0x60, 0x79, 0x92, 0xab, 0xc4, 0xdd, 0xf6, 0x0f, + 0x28, 0x41, 0x5a, 0x73, 0x8c, 0xa5, 0xbe, 0xd7, + 0xf0, 0x09, 0x22, 0x3b, 0x54, 0x6d, 0x86, 0x9f, + 0xb8, 0xd1, 0xea, 0x03, 0x1c, 0x35, 0x4e, 0x67, + 0x80, 0x99, 0xb2, 0xcb, 0xe4, 0xfd, 0x16, 0x2f, + 0x48, 0x61, 0x7a, 0x93, 0xac, 0xc5, 0xde, 0xf7, + 0x10, 0x29, 0x42, 0x5b, 0x74, 0x8d, 0xa6, 0xbf, + 0xd8, 0xf1, 0x0a, 0x23, 0x3c, 0x55, 0x6e, 0x87, + 0xa0, 0xb9, 0xd2, 0xeb, 0x04, 0x1d, 0x36, 0x4f, + 0x68, 0x81, 0x9a, 0xb3, 0xcc, 0xe5, 0xfe, 0x17, + 0x30, 0x49, 0x62, 0x7b, 0x94, 0xad, 0xc6, 0xdf, + 0xf8, 0x11, 0x2a, 0x43, 0x5c, 0x75, 0x8e, 0xa7, + 0xc0, 0xd9, 0xf2, 0x0b, 0x24, 0x3d, 0x56, 0x6f, + 0x88, 0xa1, 0xba, 0xd3, 0xec, 0x05, 0x1e, 0x37, + 0x50, 0x69, 0x82, 0x9b, 0xb4, 0xcd, 0xe6, 0xff, + 0x18, 0x31, 0x4a, 0x63, 0x7c, 0x95, 0xae, 0xc7, + 0xe0, 0xf9, 0x12, 0x2b, 0x44, 0x5d, 0x76, 0x8f, + 0xa8, 0xc1, 0xda, 0xf3, 0x0c, 0x25, 0x3e, 0x57, + 0x70, 0x89, 0xa2, 0xbb, 0xd4, 0xed, 0x06, 0x1f, + 0x38, 0x51, 0x6a, 0x83, 0x9c, 0xb5, 0xce, 0xe7, + 0x00, 0x1b, 0x36, 0x51, 0x6c, 0x87, 0xa2, 0xbd, + 0xd8, 0xf3, 0x0e, 0x29, 0x44, 0x5f, 0x7a, 0x95, + 0xb0, 0xcb, 0xe6, 0x01, 0x1c, 0x37, 0x52, 0x6d, + 0x88, 0xa3, 0xbe, 0xd9, 0xf4, 0x0f, 0x2a, 0x45, + 0x60, 0x7b, 0x96, 0xb1, 0xcc, 0xe7, 0x02, 0x1d, + 0x38, 0x53, 0x6e, 0x89, 0xa4, 0xbf, 0xda, 0xf5, + 0x10, 0x2b, 0x46, 0x61, 0x7c, 0x97, 0xb2, 0xcd, + 0xe8, 0x03, 0x1e, 0x39, 0x54, 0x6f, 0x8a, 0xa5, + 0xc0, 0xdb, 0xf6, 0x11, 0x2c, 0x47, 0x62, 0x7d, + 0x98, 0xb3, 0xce, 0xe9, 0x04, 0x1f, 0x3a, 0x55, + 0x70, 0x8b, 0xa6, 0xc1, 0xdc, 0xf7, 0x12, 0x2d, + 0x48, 0x63, 0x7e, 0x99, 0xb4, 0xcf, 0xea, 0x05, + 0x20, 0x3b, 0x56, 0x71, 0x8c, 0xa7, 0xc2, 0xdd, + 0xf8, 0x13, 0x2e, 0x49, 0x64, 0x7f, 0x9a, 0xb5, + 0xd0, 0xeb, 0x06, 0x21, 0x3c, 0x57, 0x72, 0x8d, + 0xa8, 0xc3, 0xde, 0xf9, 0x14, 0x2f, 0x4a, 0x65, + 0x80, 0x9b, 0xb6, 0xd1, 0xec, 0x07, 0x22, 0x3d, + 0x58, 0x73, 0x8e, 0xa9, 0xc4, 0xdf, 0xfa, 0x15, + 0x30, 0x4b, 0x66, 0x81, 0x9c, 0xb7, 0xd2, 0xed, + 0x08, 0x23, 0x3e, 0x59, 0x74, 0x8f, 0xaa, 0xc5, + 0xe0, 0xfb, 0x16, 0x31, 0x4c, 0x67, 0x82, 0x9d, + 0xb8, 0xd3, 0xee, 0x09, 0x24, 0x3f, 0x5a, 0x75, + 0x90, 0xab, 0xc6, 0xe1, 0xfc, 0x17, 0x32, 0x4d, + 0x68, 0x83, 0x9e, 0xb9, 0xd4, 0xef, 0x0a, 0x25, + 0x40, 0x5b, 0x76, 0x91, 0xac, 0xc7, 0xe2, 0xfd, + 0x18, 0x33, 0x4e, 0x69, 0x84, 0x9f, 0xba, 0xd5, + 0xf0, 0x0b, 0x26, 0x41, 0x5c, 0x77, 0x92, 0xad, + 0xc8, 0xe3, 0xfe, 0x19, 0x34, 0x4f, 0x6a, 0x85, + 0xa0, 0xbb, 0xd6, 0xf1, 0x0c, 0x27, 0x42, 0x5d, + 0x78, 0x93, 0xae, 0xc9, 0xe4, 0xff, 0x1a, 0x35, + 0x50, 0x6b, 0x86, 0xa1, 0xbc, 0xd7, 0xf2, 0x0d, + 0x28, 0x43, 0x5e, 0x79, 0x94, 0xaf, 0xca, 0xe5, + 0x00, 0x1d, 0x3a, 0x57, 0x74, 0x91, 0xae, 0xcb, + 0xe8, 0x05, 0x22, 0x3f, 0x5c, 0x79, 0x96, 0xb3, + 0xd0, 0xed, 0x0a, 0x27, 0x44, 0x61, 0x7e, 0x9b, + 0xb8, 0xd5, 0xf2, 0x0f, 0x2c, 0x49, 0x66, 0x83, + 0xa0, 0xbd, 0xda, 0xf7, 0x14, 0x31, 0x4e, 0x6b, + 0x88, 0xa5, 0xc2, 0xdf, 0xfc, 0x19, 0x36, 0x53, + 0x70, 0x8d, 0xaa, 0xc7, 0xe4, 0x01, 0x1e, 0x3b, + 0x58, 0x75, 0x92, 0xaf, 0xcc, 0xe9, 0x06, 0x23, + 0x40, 0x5d, 0x7a, 0x97, 0xb4, 0xd1, 0xee, 0x0b, + 0x28, 0x45, 0x62, 0x7f, 0x9c, 0xb9, 0xd6, 0xf3, + 0x10, 0x2d, 0x4a, 0x67, 0x84, 0xa1, 0xbe, 0xdb, + 0xf8, 0x15, 0x32, 0x4f, 0x6c, 0x89, 0xa6, 0xc3, + 0xe0, 0xfd, 0x1a, 0x37, 0x54, 0x71, 0x8e, 0xab, + 0xc8, 0xe5, 0x02, 0x1f, 0x3c, 0x59, 0x76, 0x93, + 0xb0, 0xcd, 0xea, 0x07, 0x24, 0x41, 0x5e, 0x7b, + 0x98, 0xb5, 0xd2, 0xef, 0x0c, 0x29, 0x46, 0x63, + 0x80, 0x9d, 0xba, 0xd7, 0xf4, 0x11, 0x2e, 0x4b, + 0x68, 0x85, 0xa2, 0xbf, 0xdc, 0xf9, 0x16, 0x33, + 0x50, 0x6d, 0x8a, 0xa7, 0xc4, 0xe1, 0xfe, 0x1b, + 0x38, 0x55, 0x72, 0x8f, 0xac, 0xc9, 0xe6, 0x03, + 0x20, 0x3d, 0x5a, 0x77, 0x94, 0xb1, 0xce, 0xeb, + 0x08, 0x25, 0x42, 0x5f, 0x7c, 0x99, 0xb6, 0xd3, + 0xf0, 0x0d, 0x2a, 0x47, 0x64, 0x81, 0x9e, 0xbb, + 0xd8, 0xf5, 0x12, 0x2f, 0x4c, 0x69, 0x86, 0xa3, + 0xc0, 0xdd, 0xfa, 0x17, 0x34, 0x51, 0x6e, 0x8b, + 0xa8, 0xc5, 0xe2, 0xff, 0x1c, 0x39, 0x56, 0x73, + 0x90, 0xad, 0xca, 0xe7, 0x04, 0x21, 0x3e, 0x5b, + 0x78, 0x95, 0xb2, 0xcf, 0xec, 0x09, 0x26, 0x43, + 0x60, 0x7d, 0x9a, 0xb7, 0xd4, 0xf1, 0x0e, 0x2b, + 0x48, 0x65, 0x82, 0x9f, 0xbc, 0xd9, 0xf6, 0x13, + 0x30, 0x4d, 0x6a, 0x87, 0xa4, 0xc1, 0xde, 0xfb, + 0x18, 0x35, 0x52, 0x6f, 0x8c, 0xa9, 0xc6, 0xe3, + 0x00, 0x1f, 0x3e, 0x5d, 0x7c, 0x9b, 0xba, 0xd9, + 0xf8, 0x17, 0x36, 0x55, 0x74, 0x93, 0xb2, 0xd1, + 0xf0, 0x0f, 0x2e, 0x4d, 0x6c, 0x8b, 0xaa, 0xc9, + 0xe8, 0x07, 0x26, 0x45, 0x64, 0x83, 0xa2, 0xc1, + 0xe0, 0xff, 0x1e, 0x3d, 0x5c, 0x7b, 0x9a, 0xb9, + 0xd8, 0xf7, 0x16, 0x35, 0x54, 0x73, 0x92, 0xb1, + 0xd0, 0xef, 0x0e, 0x2d, 0x4c, 0x6b, 0x8a, 0xa9, + 0xc8, 0xe7, 0x06, 0x25, 0x44, 0x63, 0x82, 0xa1, + 0xc0, 0xdf, 0xfe, 0x1d, 0x3c, 0x5b, 0x7a, 0x99, + 0xb8, 0xd7, 0xf6, 0x15, 0x34, 0x53, 0x72, 0x91, + 0xb0, 0xcf, 0xee, 0x0d, 0x2c, 0x4b, 0x6a, 0x89, + 0xa8, 0xc7, 0xe6, 0x05, 0x24, 0x43, 0x62, 0x81, + 0xa0, 0xbf, 0xde, 0xfd, 0x1c, 0x3b, 0x5a, 0x79, + 0x98, 0xb7, 0xd6, 0xf5, 0x14, 0x33, 0x52, 0x71, + 0x90, 0xaf, 0xce, 0xed, 0x0c, 0x2b, 0x4a, 0x69, + 0x88, 0xa7, 0xc6, 0xe5, 0x04, 0x23, 0x42, 0x61, + 0x80, 0x9f, 0xbe, 0xdd, 0xfc, 0x1b, 0x3a, 0x59, + 0x78, 0x97, 0xb6, 0xd5, 0xf4, 0x13, 0x32, 0x51, + 0x70, 0x8f, 0xae, 0xcd, 0xec, 0x0b, 0x2a, 0x49, + 0x68, 0x87, 0xa6, 0xc5, 0xe4, 0x03, 0x22, 0x41, + 0x60, 0x7f, 0x9e, 0xbd, 0xdc, 0xfb, 0x1a, 0x39, + 0x58, 0x77, 0x96, 0xb5, 0xd4, 0xf3, 0x12, 0x31, + 0x50, 0x6f, 0x8e, 0xad, 0xcc, 0xeb, 0x0a, 0x29, + 0x48, 0x67, 0x86, 0xa5, 0xc4, 0xe3, 0x02, 0x21, + 0x40, 0x5f, 0x7e, 0x9d, 0xbc, 0xdb, 0xfa, 0x19, + 0x38, 0x57, 0x76, 0x95, 0xb4, 0xd3, 0xf2, 0x11, + 0x30, 0x4f, 0x6e, 0x8d, 0xac, 0xcb, 0xea, 0x09, + 0x28, 0x47, 0x66, 0x85, 0xa4, 0xc3, 0xe2, 0x01, + 0x20, 0x3f, 0x5e, 0x7d, 0x9c, 0xbb, 0xda, 0xf9, + 0x18, 0x37, 0x56, 0x75, 0x94, 0xb3, 0xd2, 0xf1, + 0x10, 0x2f, 0x4e, 0x6d, 0x8c, 0xab, 0xca, 0xe9, + 0x08, 0x27, 0x46, 0x65, 0x84, 0xa3, 0xc2, 0xe1, + 0x00, 0x21, 0x42, 0x63, + }, + .ilen = 4100, + .result = { + 0xf0, 0x5c, 0x74, 0xad, 0x4e, 0xbc, 0x99, 0xe2, + 0xae, 0xff, 0x91, 0x3a, 0x44, 0xcf, 0x38, 0x32, + 0x1e, 0xad, 0xa7, 0xcd, 0xa1, 0x39, 0x95, 0xaa, + 0x10, 0xb1, 0xb3, 0x2e, 0x04, 0x31, 0x8f, 0x86, + 0xf2, 0x62, 0x74, 0x70, 0x0c, 0xa4, 0x46, 0x08, + 0xa8, 0xb7, 0x99, 0xa8, 0xe9, 0xd2, 0x73, 0x79, + 0x7e, 0x6e, 0xd4, 0x8f, 0x1e, 0xc7, 0x8e, 0x31, + 0x0b, 0xfa, 0x4b, 0xce, 0xfd, 0xf3, 0x57, 0x71, + 0xe9, 0x46, 0x03, 0xa5, 0x3d, 0x34, 0x00, 0xe2, + 0x18, 0xff, 0x75, 0x6d, 0x06, 0x2d, 0x00, 0xab, + 0xb9, 0x3e, 0x6c, 0x59, 0xc5, 0x84, 0x06, 0xb5, + 0x8b, 0xd0, 0x89, 0x9c, 0x4a, 0x79, 0x16, 0xc6, + 0x3d, 0x74, 0x54, 0xfa, 0x44, 0xcd, 0x23, 0x26, + 0x5c, 0xcf, 0x7e, 0x28, 0x92, 0x32, 0xbf, 0xdf, + 0xa7, 0x20, 0x3c, 0x74, 0x58, 0x2a, 0x9a, 0xde, + 0x61, 0x00, 0x1c, 0x4f, 0xff, 0x59, 0xc4, 0x22, + 0xac, 0x3c, 0xd0, 0xe8, 0x6c, 0xf9, 0x97, 0x1b, + 0x58, 0x9b, 0xad, 0x71, 0xe8, 0xa9, 0xb5, 0x0d, + 0xee, 0x2f, 0x04, 0x1f, 0x7f, 0xbc, 0x99, 0xee, + 0x84, 0xff, 0x42, 0x60, 0xdc, 0x3a, 0x18, 0xa5, + 0x81, 0xf9, 0xef, 0xdc, 0x7a, 0x0f, 0x65, 0x41, + 0x2f, 0xa3, 0xd3, 0xf9, 0xc2, 0xcb, 0xc0, 0x4d, + 0x8f, 0xd3, 0x76, 0x96, 0xad, 0x49, 0x6d, 0x38, + 0x3d, 0x39, 0x0b, 0x6c, 0x80, 0xb7, 0x54, 0x69, + 0xf0, 0x2c, 0x90, 0x02, 0x29, 0x0d, 0x1c, 0x12, + 0xad, 0x55, 0xc3, 0x8b, 0x68, 0xd9, 0xcc, 0xb3, + 0xb2, 0x64, 0x33, 0x90, 0x5e, 0xca, 0x4b, 0xe2, + 0xfb, 0x75, 0xdc, 0x63, 0xf7, 0x9f, 0x82, 0x74, + 0xf0, 0xc9, 0xaa, 0x7f, 0xe9, 0x2a, 0x9b, 0x33, + 0xbc, 0x88, 0x00, 0x7f, 0xca, 0xb2, 0x1f, 0x14, + 0xdb, 0xc5, 0x8e, 0x7b, 0x11, 0x3c, 0x3e, 0x08, + 0xf3, 0x83, 0xe8, 0xe0, 0x94, 0x86, 0x2e, 0x92, + 0x78, 0x6b, 0x01, 0xc9, 0xc7, 0x83, 0xba, 0x21, + 0x6a, 0x25, 0x15, 0x33, 0x4e, 0x45, 0x08, 0xec, + 0x35, 0xdb, 0xe0, 0x6e, 0x31, 0x51, 0x79, 0xa9, + 0x42, 0x44, 0x65, 0xc1, 0xa0, 0xf1, 0xf9, 0x2a, + 0x70, 0xd5, 0xb6, 0xc6, 0xc1, 0x8c, 0x39, 0xfc, + 0x25, 0xa6, 0x55, 0xd9, 0xdd, 0x2d, 0x4c, 0xec, + 0x49, 0xc6, 0xeb, 0x0e, 0xa8, 0x25, 0x2a, 0x16, + 0x1b, 0x66, 0x84, 0xda, 0xe2, 0x92, 0xe5, 0xc0, + 0xc8, 0x53, 0x07, 0xaf, 0x80, 0x84, 0xec, 0xfd, + 0xcd, 0xd1, 0x6e, 0xcd, 0x6f, 0x6a, 0xf5, 0x36, + 0xc5, 0x15, 0xe5, 0x25, 0x7d, 0x77, 0xd1, 0x1a, + 0x93, 0x36, 0xa9, 0xcf, 0x7c, 0xa4, 0x54, 0x4a, + 0x06, 0x51, 0x48, 0x4e, 0xf6, 0x59, 0x87, 0xd2, + 0x04, 0x02, 0xef, 0xd3, 0x44, 0xde, 0x76, 0x31, + 0xb3, 0x34, 0x17, 0x1b, 0x9d, 0x66, 0x11, 0x9f, + 0x1e, 0xcc, 0x17, 0xe9, 0xc7, 0x3c, 0x1b, 0xe7, + 0xcb, 0x50, 0x08, 0xfc, 0xdc, 0x2b, 0x24, 0xdb, + 0x65, 0x83, 0xd0, 0x3b, 0xe3, 0x30, 0xea, 0x94, + 0x6c, 0xe7, 0xe8, 0x35, 0x32, 0xc7, 0xdb, 0x64, + 0xb4, 0x01, 0xab, 0x36, 0x2c, 0x77, 0x13, 0xaf, + 0xf8, 0x2b, 0x88, 0x3f, 0x54, 0x39, 0xc4, 0x44, + 0xfe, 0xef, 0x6f, 0x68, 0x34, 0xbe, 0x0f, 0x05, + 0x16, 0x6d, 0xf6, 0x0a, 0x30, 0xe7, 0xe3, 0xed, + 0xc4, 0xde, 0x3c, 0x1b, 0x13, 0xd8, 0xdb, 0xfe, + 0x41, 0x62, 0xe5, 0x28, 0xd4, 0x8d, 0xa3, 0xc7, + 0x93, 0x97, 0xc6, 0x48, 0x45, 0x1d, 0x9f, 0x83, + 0xdf, 0x4b, 0x40, 0x3e, 0x42, 0x25, 0x87, 0x80, + 0x4c, 0x7d, 0xa8, 0xd4, 0x98, 0x23, 0x95, 0x75, + 0x41, 0x8c, 0xda, 0x41, 0x9b, 0xd4, 0xa7, 0x06, + 0xb5, 0xf1, 0x71, 0x09, 0x53, 0xbe, 0xca, 0xbf, + 0x32, 0x03, 0xed, 0xf0, 0x50, 0x1c, 0x56, 0x39, + 0x5b, 0xa4, 0x75, 0x18, 0xf7, 0x9b, 0x58, 0xef, + 0x53, 0xfc, 0x2a, 0x38, 0x23, 0x15, 0x75, 0xcd, + 0x45, 0xe5, 0x5a, 0x82, 0x55, 0xba, 0x21, 0xfa, + 0xd4, 0xbd, 0xc6, 0x94, 0x7c, 0xc5, 0x80, 0x12, + 0xf7, 0x4b, 0x32, 0xc4, 0x9a, 0x82, 0xd8, 0x28, + 0x8f, 0xd9, 0xc2, 0x0f, 0x60, 0x03, 0xbe, 0x5e, + 0x21, 0xd6, 0x5f, 0x58, 0xbf, 0x5c, 0xb1, 0x32, + 0x82, 0x8d, 0xa9, 0xe5, 0xf2, 0x66, 0x1a, 0xc0, + 0xa0, 0xbc, 0x58, 0x2f, 0x71, 0xf5, 0x2f, 0xed, + 0xd1, 0x26, 0xb9, 0xd8, 0x49, 0x5a, 0x07, 0x19, + 0x01, 0x7c, 0x59, 0xb0, 0xf8, 0xa4, 0xb7, 0xd3, + 0x7b, 0x1a, 0x8c, 0x38, 0xf4, 0x50, 0xa4, 0x59, + 0xb0, 0xcc, 0x41, 0x0b, 0x88, 0x7f, 0xe5, 0x31, + 0xb3, 0x42, 0xba, 0xa2, 0x7e, 0xd4, 0x32, 0x71, + 0x45, 0x87, 0x48, 0xa9, 0xc2, 0xf2, 0x89, 0xb3, + 0xe4, 0xa7, 0x7e, 0x52, 0x15, 0x61, 0xfa, 0xfe, + 0xc9, 0xdd, 0x81, 0xeb, 0x13, 0xab, 0xab, 0xc3, + 0x98, 0x59, 0xd8, 0x16, 0x3d, 0x14, 0x7a, 0x1c, + 0x3c, 0x41, 0x9a, 0x16, 0x16, 0x9b, 0xd2, 0xd2, + 0x69, 0x3a, 0x29, 0x23, 0xac, 0x86, 0x32, 0xa5, + 0x48, 0x9c, 0x9e, 0xf3, 0x47, 0x77, 0x81, 0x70, + 0x24, 0xe8, 0x85, 0xd2, 0xf5, 0xb5, 0xfa, 0xff, + 0x59, 0x6a, 0xd3, 0x50, 0x59, 0x43, 0x59, 0xde, + 0xd9, 0xf1, 0x55, 0xa5, 0x0c, 0xc3, 0x1a, 0x1a, + 0x18, 0x34, 0x0d, 0x1a, 0x63, 0x33, 0xed, 0x10, + 0xe0, 0x1d, 0x2a, 0x18, 0xd2, 0xc0, 0x54, 0xa8, + 0xca, 0xb5, 0x9a, 0xd3, 0xdd, 0xca, 0x45, 0x84, + 0x50, 0xe7, 0x0f, 0xfe, 0xa4, 0x99, 0x5a, 0xbe, + 0x43, 0x2d, 0x9a, 0xcb, 0x92, 0x3f, 0x5a, 0x1d, + 0x85, 0xd8, 0xc9, 0xdf, 0x68, 0xc9, 0x12, 0x80, + 0x56, 0x0c, 0xdc, 0x00, 0xdc, 0x3a, 0x7d, 0x9d, + 0xa3, 0xa2, 0xe8, 0x4d, 0xbf, 0xf9, 0x70, 0xa0, + 0xa4, 0x13, 0x4f, 0x6b, 0xaf, 0x0a, 0x89, 0x7f, + 0xda, 0xf0, 0xbf, 0x9b, 0xc8, 0x1d, 0xe5, 0xf8, + 0x2e, 0x8b, 0x07, 0xb5, 0x73, 0x1b, 0xcc, 0xa2, + 0xa6, 0xad, 0x30, 0xbc, 0x78, 0x3c, 0x5b, 0x10, + 0xfa, 0x5e, 0x62, 0x2d, 0x9e, 0x64, 0xb3, 0x33, + 0xce, 0xf9, 0x1f, 0x86, 0xe7, 0x8b, 0xa2, 0xb8, + 0xe8, 0x99, 0x57, 0x8c, 0x11, 0xed, 0x66, 0xd9, + 0x3c, 0x72, 0xb9, 0xc3, 0xe6, 0x4e, 0x17, 0x3a, + 0x6a, 0xcb, 0x42, 0x24, 0x06, 0xed, 0x3e, 0x4e, + 0xa3, 0xe8, 0x6a, 0x94, 0xda, 0x0d, 0x4e, 0xd5, + 0x14, 0x19, 0xcf, 0xb6, 0x26, 0xd8, 0x2e, 0xcc, + 0x64, 0x76, 0x38, 0x49, 0x4d, 0xfe, 0x30, 0x6d, + 0xe4, 0xc8, 0x8c, 0x7b, 0xc4, 0xe0, 0x35, 0xba, + 0x22, 0x6e, 0x76, 0xe1, 0x1a, 0xf2, 0x53, 0xc3, + 0x28, 0xa2, 0x82, 0x1f, 0x61, 0x69, 0xad, 0xc1, + 0x7b, 0x28, 0x4b, 0x1e, 0x6c, 0x85, 0x95, 0x9b, + 0x51, 0xb5, 0x17, 0x7f, 0x12, 0x69, 0x8c, 0x24, + 0xd5, 0xc7, 0x5a, 0x5a, 0x11, 0x54, 0xff, 0x5a, + 0xf7, 0x16, 0xc3, 0x91, 0xa6, 0xf0, 0xdc, 0x0a, + 0xb6, 0xa7, 0x4a, 0x0d, 0x7a, 0x58, 0xfe, 0xa5, + 0xf5, 0xcb, 0x8f, 0x7b, 0x0e, 0xea, 0x57, 0xe7, + 0xbd, 0x79, 0xd6, 0x1c, 0x88, 0x23, 0x6c, 0xf2, + 0x4d, 0x29, 0x77, 0x53, 0x35, 0x6a, 0x00, 0x8d, + 0xcd, 0xa3, 0x58, 0xbe, 0x77, 0x99, 0x18, 0xf8, + 0xe6, 0xe1, 0x8f, 0xe9, 0x37, 0x8f, 0xe3, 0xe2, + 0x5a, 0x8a, 0x93, 0x25, 0xaf, 0xf3, 0x78, 0x80, + 0xbe, 0xa6, 0x1b, 0xc6, 0xac, 0x8b, 0x1c, 0x91, + 0x58, 0xe1, 0x9f, 0x89, 0x35, 0x9d, 0x1d, 0x21, + 0x29, 0x9f, 0xf4, 0x99, 0x02, 0x27, 0x0f, 0xa8, + 0x4f, 0x79, 0x94, 0x2b, 0x33, 0x2c, 0xda, 0xa2, + 0x26, 0x39, 0x83, 0x94, 0xef, 0x27, 0xd8, 0x53, + 0x8f, 0x66, 0x0d, 0xe4, 0x41, 0x7d, 0x34, 0xcd, + 0x43, 0x7c, 0x95, 0x0a, 0x53, 0xef, 0x66, 0xda, + 0x7e, 0x9b, 0xf3, 0x93, 0xaf, 0xd0, 0x73, 0x71, + 0xba, 0x40, 0x9b, 0x74, 0xf8, 0xd7, 0xd7, 0x41, + 0x6d, 0xaf, 0x72, 0x9c, 0x8d, 0x21, 0x87, 0x3c, + 0xfd, 0x0a, 0x90, 0xa9, 0x47, 0x96, 0x9e, 0xd3, + 0x88, 0xee, 0x73, 0xcf, 0x66, 0x2f, 0x52, 0x56, + 0x6d, 0xa9, 0x80, 0x4c, 0xe2, 0x6f, 0x62, 0x88, + 0x3f, 0x0e, 0x54, 0x17, 0x48, 0x80, 0x5d, 0xd3, + 0xc3, 0xda, 0x25, 0x3d, 0xa1, 0xc8, 0xcb, 0x9f, + 0x9b, 0x70, 0xb3, 0xa1, 0xeb, 0x04, 0x52, 0xa1, + 0xf2, 0x22, 0x0f, 0xfc, 0xc8, 0x18, 0xfa, 0xf9, + 0x85, 0x9c, 0xf1, 0xac, 0xeb, 0x0c, 0x02, 0x46, + 0x75, 0xd2, 0xf5, 0x2c, 0xe3, 0xd2, 0x59, 0x94, + 0x12, 0xf3, 0x3c, 0xfc, 0xd7, 0x92, 0xfa, 0x36, + 0xba, 0x61, 0x34, 0x38, 0x7c, 0xda, 0x48, 0x3e, + 0x08, 0xc9, 0x39, 0x23, 0x5e, 0x02, 0x2c, 0x1a, + 0x18, 0x7e, 0xb4, 0xd9, 0xfd, 0x9e, 0x40, 0x02, + 0xb1, 0x33, 0x37, 0x32, 0xe7, 0xde, 0xd6, 0xd0, + 0x7c, 0x58, 0x65, 0x4b, 0xf8, 0x34, 0x27, 0x9c, + 0x44, 0xb4, 0xbd, 0xe9, 0xe9, 0x4c, 0x78, 0x7d, + 0x4b, 0x9f, 0xce, 0xb1, 0xcd, 0x47, 0xa5, 0x37, + 0xe5, 0x6d, 0xbd, 0xb9, 0x43, 0x94, 0x0a, 0xd4, + 0xd6, 0xf9, 0x04, 0x5f, 0xb5, 0x66, 0x6c, 0x1a, + 0x35, 0x12, 0xe3, 0x36, 0x28, 0x27, 0x36, 0x58, + 0x01, 0x2b, 0x79, 0xe4, 0xba, 0x6d, 0x10, 0x7d, + 0x65, 0xdf, 0x84, 0x95, 0xf4, 0xd5, 0xb6, 0x8f, + 0x2b, 0x9f, 0x96, 0x00, 0x86, 0x60, 0xf0, 0x21, + 0x76, 0xa8, 0x6a, 0x8c, 0x28, 0x1c, 0xb3, 0x6b, + 0x97, 0xd7, 0xb6, 0x53, 0x2a, 0xcc, 0xab, 0x40, + 0x9d, 0x62, 0x79, 0x58, 0x52, 0xe6, 0x65, 0xb7, + 0xab, 0x55, 0x67, 0x9c, 0x89, 0x7c, 0x03, 0xb0, + 0x73, 0x59, 0xc5, 0x81, 0xf5, 0x18, 0x17, 0x5c, + 0x89, 0xf3, 0x78, 0x35, 0x44, 0x62, 0x78, 0x72, + 0xd0, 0x96, 0xeb, 0x31, 0xe7, 0x87, 0x77, 0x14, + 0x99, 0x51, 0xf2, 0x59, 0x26, 0x9e, 0xb5, 0xa6, + 0x45, 0xfe, 0x6e, 0xbd, 0x07, 0x4c, 0x94, 0x5a, + 0xa5, 0x7d, 0xfc, 0xf1, 0x2b, 0x77, 0xe2, 0xfe, + 0x17, 0xd4, 0x84, 0xa0, 0xac, 0xb5, 0xc7, 0xda, + 0xa9, 0x1a, 0xb6, 0xf3, 0x74, 0x11, 0xb4, 0x9d, + 0xfb, 0x79, 0x2e, 0x04, 0x2d, 0x50, 0x28, 0x83, + 0xbf, 0xc6, 0x52, 0xd3, 0x34, 0xd6, 0xe8, 0x7a, + 0xb6, 0xea, 0xe7, 0xa8, 0x6c, 0x15, 0x1e, 0x2c, + 0x57, 0xbc, 0x48, 0x4e, 0x5f, 0x5c, 0xb6, 0x92, + 0xd2, 0x49, 0x77, 0x81, 0x6d, 0x90, 0x70, 0xae, + 0x98, 0xa1, 0x03, 0x0d, 0x6b, 0xb9, 0x77, 0x14, + 0xf1, 0x4e, 0x23, 0xd3, 0xf8, 0x68, 0xbd, 0xc2, + 0xfe, 0x04, 0xb7, 0x5c, 0xc5, 0x17, 0x60, 0x8f, + 0x65, 0x54, 0xa4, 0x7a, 0x42, 0xdc, 0x18, 0x0d, + 0xb5, 0xcf, 0x0f, 0xd3, 0xc7, 0x91, 0x66, 0x1b, + 0x45, 0x42, 0x27, 0x75, 0x50, 0xe5, 0xee, 0xb8, + 0x7f, 0x33, 0x2c, 0xba, 0x4a, 0x92, 0x4d, 0x2c, + 0x3c, 0xe3, 0x0d, 0x80, 0x01, 0xba, 0x0d, 0x29, + 0xd8, 0x3c, 0xe9, 0x13, 0x16, 0x57, 0xe6, 0xea, + 0x94, 0x52, 0xe7, 0x00, 0x4d, 0x30, 0xb0, 0x0f, + 0x35, 0xb8, 0xb8, 0xa7, 0xb1, 0xb5, 0x3b, 0x44, + 0xe1, 0x2f, 0xfd, 0x88, 0xed, 0x43, 0xe7, 0x52, + 0x10, 0x93, 0xb3, 0x8a, 0x30, 0x6b, 0x0a, 0xf7, + 0x23, 0xc6, 0x50, 0x9d, 0x4a, 0xb0, 0xde, 0xc3, + 0xdc, 0x9b, 0x2f, 0x01, 0x56, 0x36, 0x09, 0xc5, + 0x2f, 0x6b, 0xfe, 0xf1, 0xd8, 0x27, 0x45, 0x03, + 0x30, 0x5e, 0x5c, 0x5b, 0xb4, 0x62, 0x0e, 0x1a, + 0xa9, 0x21, 0x2b, 0x92, 0x94, 0x87, 0x62, 0x57, + 0x4c, 0x10, 0x74, 0x1a, 0xf1, 0x0a, 0xc5, 0x84, + 0x3b, 0x9e, 0x72, 0x02, 0xd7, 0xcc, 0x09, 0x56, + 0xbd, 0x54, 0xc1, 0xf0, 0xc3, 0xe3, 0xb3, 0xf8, + 0xd2, 0x0d, 0x61, 0xcb, 0xef, 0xce, 0x0d, 0x05, + 0xb0, 0x98, 0xd9, 0x8e, 0x4f, 0xf9, 0xbc, 0x93, + 0xa6, 0xea, 0xc8, 0xcf, 0x10, 0x53, 0x4b, 0xf1, + 0xec, 0xfc, 0x89, 0xf9, 0x64, 0xb0, 0x22, 0xbf, + 0x9e, 0x55, 0x46, 0x9f, 0x7c, 0x50, 0x8e, 0x84, + 0x54, 0x20, 0x98, 0xd7, 0x6c, 0x40, 0x1e, 0xdb, + 0x69, 0x34, 0x78, 0x61, 0x24, 0x21, 0x9c, 0x8a, + 0xb3, 0x62, 0x31, 0x8b, 0x6e, 0xf5, 0x2a, 0x35, + 0x86, 0x13, 0xb1, 0x6c, 0x64, 0x2e, 0x41, 0xa5, + 0x05, 0xf2, 0x42, 0xba, 0xd2, 0x3a, 0x0d, 0x8e, + 0x8a, 0x59, 0x94, 0x3c, 0xcf, 0x36, 0x27, 0x82, + 0xc2, 0x45, 0xee, 0x58, 0xcd, 0x88, 0xb4, 0xec, + 0xde, 0xb2, 0x96, 0x0a, 0xaf, 0x38, 0x6f, 0x88, + 0xd7, 0xd8, 0xe1, 0xdf, 0xb9, 0x96, 0xa9, 0x0a, + 0xb1, 0x95, 0x28, 0x86, 0x20, 0xe9, 0x17, 0x49, + 0xa2, 0x29, 0x38, 0xaa, 0xa5, 0xe9, 0x6e, 0xf1, + 0x19, 0x27, 0xc0, 0xd5, 0x2a, 0x22, 0xc3, 0x0b, + 0xdb, 0x7c, 0x73, 0x10, 0xb9, 0xba, 0x89, 0x76, + 0x54, 0xae, 0x7d, 0x71, 0xb3, 0x93, 0xf6, 0x32, + 0xe6, 0x47, 0x43, 0x55, 0xac, 0xa0, 0x0d, 0xc2, + 0x93, 0x27, 0x4a, 0x8e, 0x0e, 0x74, 0x15, 0xc7, + 0x0b, 0x85, 0xd9, 0x0c, 0xa9, 0x30, 0x7a, 0x3e, + 0xea, 0x8f, 0x85, 0x6d, 0x3a, 0x12, 0x4f, 0x72, + 0x69, 0x58, 0x7a, 0x80, 0xbb, 0xb5, 0x97, 0xf3, + 0xcf, 0x70, 0xd2, 0x5d, 0xdd, 0x4d, 0x21, 0x79, + 0x54, 0x4d, 0xe4, 0x05, 0xe8, 0xbd, 0xc2, 0x62, + 0xb1, 0x3b, 0x77, 0x1c, 0xd6, 0x5c, 0xf3, 0xa0, + 0x79, 0x00, 0xa8, 0x6c, 0x29, 0xd9, 0x18, 0x24, + 0x36, 0xa2, 0x46, 0xc0, 0x96, 0x65, 0x7f, 0xbd, + 0x2a, 0xed, 0x36, 0x16, 0x0c, 0xaa, 0x9f, 0xf4, + 0xc5, 0xb4, 0xe2, 0x12, 0xed, 0x69, 0xed, 0x4f, + 0x26, 0x2c, 0x39, 0x52, 0x89, 0x98, 0xe7, 0x2c, + 0x99, 0xa4, 0x9e, 0xa3, 0x9b, 0x99, 0x46, 0x7a, + 0x3a, 0xdc, 0xa8, 0x59, 0xa3, 0xdb, 0xc3, 0x3b, + 0x95, 0x0d, 0x3b, 0x09, 0x6e, 0xee, 0x83, 0x5d, + 0x32, 0x4d, 0xed, 0xab, 0xfa, 0x98, 0x14, 0x4e, + 0xc3, 0x15, 0x45, 0x53, 0x61, 0xc4, 0x93, 0xbd, + 0x90, 0xf4, 0x99, 0x95, 0x4c, 0xe6, 0x76, 0x92, + 0x29, 0x90, 0x46, 0x30, 0x92, 0x69, 0x7d, 0x13, + 0xf2, 0xa5, 0xcd, 0x69, 0x49, 0x44, 0xb2, 0x0f, + 0x63, 0x40, 0x36, 0x5f, 0x09, 0xe2, 0x78, 0xf8, + 0x91, 0xe3, 0xe2, 0xfa, 0x10, 0xf7, 0xc8, 0x24, + 0xa8, 0x89, 0x32, 0x5c, 0x37, 0x25, 0x1d, 0xb2, + 0xea, 0x17, 0x8a, 0x0a, 0xa9, 0x64, 0xc3, 0x7c, + 0x3c, 0x7c, 0xbd, 0xc6, 0x79, 0x34, 0xe7, 0xe2, + 0x85, 0x8e, 0xbf, 0xf8, 0xde, 0x92, 0xa0, 0xae, + 0x20, 0xc4, 0xf6, 0xbb, 0x1f, 0x38, 0x19, 0x0e, + 0xe8, 0x79, 0x9c, 0xa1, 0x23, 0xe9, 0x54, 0x7e, + 0x37, 0x2f, 0xe2, 0x94, 0x32, 0xaf, 0xa0, 0x23, + 0x49, 0xe4, 0xc0, 0xb3, 0xac, 0x00, 0x8f, 0x36, + 0x05, 0xc4, 0xa6, 0x96, 0xec, 0x05, 0x98, 0x4f, + 0x96, 0x67, 0x57, 0x1f, 0x20, 0x86, 0x1b, 0x2d, + 0x69, 0xe4, 0x29, 0x93, 0x66, 0x5f, 0xaf, 0x6b, + 0x88, 0x26, 0x2c, 0x67, 0x02, 0x4b, 0x52, 0xd0, + 0x83, 0x7a, 0x43, 0x1f, 0xc0, 0x71, 0x15, 0x25, + 0x77, 0x65, 0x08, 0x60, 0x11, 0x76, 0x4c, 0x8d, + 0xed, 0xa9, 0x27, 0xc6, 0xb1, 0x2a, 0x2c, 0x6a, + 0x4a, 0x97, 0xf5, 0xc6, 0xb7, 0x70, 0x42, 0xd3, + 0x03, 0xd1, 0x24, 0x95, 0xec, 0x6d, 0xab, 0x38, + 0x72, 0xce, 0xe2, 0x8b, 0x33, 0xd7, 0x51, 0x09, + 0xdc, 0x45, 0xe0, 0x09, 0x96, 0x32, 0xf3, 0xc4, + 0x84, 0xdc, 0x73, 0x73, 0x2d, 0x1b, 0x11, 0x98, + 0xc5, 0x0e, 0x69, 0x28, 0x94, 0xc7, 0xb5, 0x4d, + 0xc8, 0x8a, 0xd0, 0xaa, 0x13, 0x2e, 0x18, 0x74, + 0xdd, 0xd1, 0x1e, 0xf3, 0x90, 0xe8, 0xfc, 0x9a, + 0x72, 0x4a, 0x0e, 0xd1, 0xe4, 0xfb, 0x0d, 0x96, + 0xd1, 0x0c, 0x79, 0x85, 0x1b, 0x1c, 0xfe, 0xe1, + 0x62, 0x8f, 0x7a, 0x73, 0x32, 0xab, 0xc8, 0x18, + 0x69, 0xe3, 0x34, 0x30, 0xdf, 0x13, 0xa6, 0xe5, + 0xe8, 0x0e, 0x67, 0x7f, 0x81, 0x11, 0xb4, 0x60, + 0xc7, 0xbd, 0x79, 0x65, 0x50, 0xdc, 0xc4, 0x5b, + 0xde, 0x39, 0xa4, 0x01, 0x72, 0x63, 0xf3, 0xd1, + 0x64, 0x4e, 0xdf, 0xfc, 0x27, 0x92, 0x37, 0x0d, + 0x57, 0xcd, 0x11, 0x4f, 0x11, 0x04, 0x8e, 0x1d, + 0x16, 0xf7, 0xcd, 0x92, 0x9a, 0x99, 0x30, 0x14, + 0xf1, 0x7c, 0x67, 0x1b, 0x1f, 0x41, 0x0b, 0xe8, + 0x32, 0xe8, 0xb8, 0xc1, 0x4f, 0x54, 0x86, 0x4f, + 0xe5, 0x79, 0x81, 0x73, 0xcd, 0x43, 0x59, 0x68, + 0x73, 0x02, 0x3b, 0x78, 0x21, 0x72, 0x43, 0x00, + 0x49, 0x17, 0xf7, 0x00, 0xaf, 0x68, 0x24, 0x53, + 0x05, 0x0a, 0xc3, 0x33, 0xe0, 0x33, 0x3f, 0x69, + 0xd2, 0x84, 0x2f, 0x0b, 0xed, 0xde, 0x04, 0xf4, + 0x11, 0x94, 0x13, 0x69, 0x51, 0x09, 0x28, 0xde, + 0x57, 0x5c, 0xef, 0xdc, 0x9a, 0x49, 0x1c, 0x17, + 0x97, 0xf3, 0x96, 0xc1, 0x7f, 0x5d, 0x2e, 0x7d, + 0x55, 0xb8, 0xb3, 0x02, 0x09, 0xb3, 0x1f, 0xe7, + 0xc9, 0x8d, 0xa3, 0x36, 0x34, 0x8a, 0x77, 0x13, + 0x30, 0x63, 0x4c, 0xa5, 0xcd, 0xc3, 0xe0, 0x7e, + 0x05, 0xa1, 0x7b, 0x0c, 0xcb, 0x74, 0x47, 0x31, + 0x62, 0x03, 0x43, 0xf1, 0x87, 0xb4, 0xb0, 0x85, + 0x87, 0x8e, 0x4b, 0x25, 0xc7, 0xcf, 0xae, 0x4b, + 0x36, 0x46, 0x3e, 0x62, 0xbc, 0x6f, 0xeb, 0x5f, + 0x73, 0xac, 0xe6, 0x07, 0xee, 0xc1, 0xa1, 0xd6, + 0xc4, 0xab, 0xc9, 0xd6, 0x89, 0x45, 0xe1, 0xf1, + 0x04, 0x4e, 0x1a, 0x6f, 0xbb, 0x4f, 0x3a, 0xa3, + 0xa0, 0xcb, 0xa3, 0x0a, 0xd8, 0x71, 0x35, 0x55, + 0xe4, 0xbc, 0x2e, 0x04, 0x06, 0xe6, 0xff, 0x5b, + 0x1c, 0xc0, 0x11, 0x7c, 0xc5, 0x17, 0xf3, 0x38, + 0xcf, 0xe9, 0xba, 0x0f, 0x0e, 0xef, 0x02, 0xc2, + 0x8d, 0xc6, 0xbc, 0x4b, 0x67, 0x20, 0x95, 0xd7, + 0x2c, 0x45, 0x5b, 0x86, 0x44, 0x8c, 0x6f, 0x2e, + 0x7e, 0x9f, 0x1c, 0x77, 0xba, 0x6b, 0x0e, 0xa3, + 0x69, 0xdc, 0xab, 0x24, 0x57, 0x60, 0x47, 0xc1, + 0xd1, 0xa5, 0x9d, 0x23, 0xe6, 0xb1, 0x37, 0xfe, + 0x93, 0xd2, 0x4c, 0x46, 0xf9, 0x0c, 0xc6, 0xfb, + 0xd6, 0x9d, 0x99, 0x69, 0xab, 0x7a, 0x07, 0x0c, + 0x65, 0xe7, 0xc4, 0x08, 0x96, 0xe2, 0xa5, 0x01, + 0x3f, 0x46, 0x07, 0x05, 0x7e, 0xe8, 0x9a, 0x90, + 0x50, 0xdc, 0xe9, 0x7a, 0xea, 0xa1, 0x39, 0x6e, + 0x66, 0xe4, 0x6f, 0xa5, 0x5f, 0xb2, 0xd9, 0x5b, + 0xf5, 0xdb, 0x2a, 0x32, 0xf0, 0x11, 0x6f, 0x7c, + 0x26, 0x10, 0x8f, 0x3d, 0x80, 0xe9, 0x58, 0xf7, + 0xe0, 0xa8, 0x57, 0xf8, 0xdb, 0x0e, 0xce, 0x99, + 0x63, 0x19, 0x3d, 0xd5, 0xec, 0x1b, 0x77, 0x69, + 0x98, 0xf6, 0xe4, 0x5f, 0x67, 0x17, 0x4b, 0x09, + 0x85, 0x62, 0x82, 0x70, 0x18, 0xe2, 0x9a, 0x78, + 0xe2, 0x62, 0xbd, 0xb4, 0xf1, 0x42, 0xc6, 0xfb, + 0x08, 0xd0, 0xbd, 0xeb, 0x4e, 0x09, 0xf2, 0xc8, + 0x1e, 0xdc, 0x3d, 0x32, 0x21, 0x56, 0x9c, 0x4f, + 0x35, 0xf3, 0x61, 0x06, 0x72, 0x84, 0xc4, 0x32, + 0xf2, 0xf1, 0xfa, 0x0b, 0x2f, 0xc3, 0xdb, 0x02, + 0x04, 0xc2, 0xde, 0x57, 0x64, 0x60, 0x8d, 0xcf, + 0xcb, 0x86, 0x5d, 0x97, 0x3e, 0xb1, 0x9c, 0x01, + 0xd6, 0x28, 0x8f, 0x99, 0xbc, 0x46, 0xeb, 0x05, + 0xaf, 0x7e, 0xb8, 0x21, 0x2a, 0x56, 0x85, 0x1c, + 0xb3, 0x71, 0xa0, 0xde, 0xca, 0x96, 0xf1, 0x78, + 0x49, 0xa2, 0x99, 0x81, 0x80, 0x5c, 0x01, 0xf5, + 0xa0, 0xa2, 0x56, 0x63, 0xe2, 0x70, 0x07, 0xa5, + 0x95, 0xd6, 0x85, 0xeb, 0x36, 0x9e, 0xa9, 0x51, + 0x66, 0x56, 0x5f, 0x1d, 0x02, 0x19, 0xe2, 0xf6, + 0x4f, 0x73, 0x38, 0x09, 0x75, 0x64, 0x48, 0xe0, + 0xf1, 0x7e, 0x0e, 0xe8, 0x9d, 0xf9, 0xed, 0x94, + 0xfe, 0x16, 0x26, 0x62, 0x49, 0x74, 0xf4, 0xb0, + 0xd4, 0xa9, 0x6c, 0xb0, 0xfd, 0x53, 0xe9, 0x81, + 0xe0, 0x7a, 0xbf, 0xcf, 0xb5, 0xc4, 0x01, 0x81, + 0x79, 0x99, 0x77, 0x01, 0x3b, 0xe9, 0xa2, 0xb6, + 0xe6, 0x6a, 0x8a, 0x9e, 0x56, 0x1c, 0x8d, 0x1e, + 0x8f, 0x06, 0x55, 0x2c, 0x6c, 0xdc, 0x92, 0x87, + 0x64, 0x3b, 0x4b, 0x19, 0xa1, 0x13, 0x64, 0x1d, + 0x4a, 0xe9, 0xc0, 0x00, 0xb8, 0x95, 0xef, 0x6b, + 0x1a, 0x86, 0x6d, 0x37, 0x52, 0x02, 0xc2, 0xe0, + 0xc8, 0xbb, 0x42, 0x0c, 0x02, 0x21, 0x4a, 0xc9, + 0xef, 0xa0, 0x54, 0xe4, 0x5e, 0x16, 0x53, 0x81, + 0x70, 0x62, 0x10, 0xaf, 0xde, 0xb8, 0xb5, 0xd3, + 0xe8, 0x5e, 0x6c, 0xc3, 0x8a, 0x3e, 0x18, 0x07, + 0xf2, 0x2f, 0x7d, 0xa7, 0xe1, 0x3d, 0x4e, 0xb4, + 0x26, 0xa7, 0xa3, 0x93, 0x86, 0xb2, 0x04, 0x1e, + 0x53, 0x5d, 0x86, 0xd6, 0xde, 0x65, 0xca, 0xe3, + 0x4e, 0xc1, 0xcf, 0xef, 0xc8, 0x70, 0x1b, 0x83, + 0x13, 0xdd, 0x18, 0x8b, 0x0d, 0x76, 0xd2, 0xf6, + 0x37, 0x7a, 0x93, 0x7a, 0x50, 0x11, 0x9f, 0x96, + 0x86, 0x25, 0xfd, 0xac, 0xdc, 0xbe, 0x18, 0x93, + 0x19, 0x6b, 0xec, 0x58, 0x4f, 0xb9, 0x75, 0xa7, + 0xdd, 0x3f, 0x2f, 0xec, 0xc8, 0x5a, 0x84, 0xab, + 0xd5, 0xe4, 0x8a, 0x07, 0xf6, 0x4d, 0x23, 0xd6, + 0x03, 0xfb, 0x03, 0x6a, 0xea, 0x66, 0xbf, 0xd4, + 0xb1, 0x34, 0xfb, 0x78, 0xe9, 0x55, 0xdc, 0x7c, + 0x3d, 0x9c, 0xe5, 0x9a, 0xac, 0xc3, 0x7a, 0x80, + 0x24, 0x6d, 0xa0, 0xef, 0x25, 0x7c, 0xb7, 0xea, + 0xce, 0x4d, 0x5f, 0x18, 0x60, 0xce, 0x87, 0x22, + 0x66, 0x2f, 0xd5, 0xdd, 0xdd, 0x02, 0x21, 0x75, + 0x82, 0xa0, 0x1f, 0x58, 0xc6, 0xd3, 0x62, 0xf7, + 0x32, 0xd8, 0xaf, 0x1e, 0x07, 0x77, 0x51, 0x96, + 0xd5, 0x6b, 0x1e, 0x7e, 0x80, 0x02, 0xe8, 0x67, + 0xea, 0x17, 0x0b, 0x10, 0xd2, 0x3f, 0x28, 0x25, + 0x4f, 0x05, 0x77, 0x02, 0x14, 0x69, 0xf0, 0x2c, + 0xbe, 0x0c, 0xf1, 0x74, 0x30, 0xd1, 0xb9, 0x9b, + 0xfc, 0x8c, 0xbb, 0x04, 0x16, 0xd9, 0xba, 0xc3, + 0xbc, 0x91, 0x8a, 0xc4, 0x30, 0xa4, 0xb0, 0x12, + 0x4c, 0x21, 0x87, 0xcb, 0xc9, 0x1d, 0x16, 0x96, + 0x07, 0x6f, 0x23, 0x54, 0xb9, 0x6f, 0x79, 0xe5, + 0x64, 0xc0, 0x64, 0xda, 0xb1, 0xae, 0xdd, 0x60, + 0x6c, 0x1a, 0x9d, 0xd3, 0x04, 0x8e, 0x45, 0xb0, + 0x92, 0x61, 0xd0, 0x48, 0x81, 0xed, 0x5e, 0x1d, + 0xa0, 0xc9, 0xa4, 0x33, 0xc7, 0x13, 0x51, 0x5d, + 0x7f, 0x83, 0x73, 0xb6, 0x70, 0x18, 0x65, 0x3e, + 0x2f, 0x0e, 0x7a, 0x12, 0x39, 0x98, 0xab, 0xd8, + 0x7e, 0x6f, 0xa3, 0xd1, 0xba, 0x56, 0xad, 0xbd, + 0xf0, 0x03, 0x01, 0x1c, 0x85, 0x35, 0x9f, 0xeb, + 0x19, 0x63, 0xa1, 0xaf, 0xfe, 0x2d, 0x35, 0x50, + 0x39, 0xa0, 0x65, 0x7c, 0x95, 0x7e, 0x6b, 0xfe, + 0xc1, 0xac, 0x07, 0x7c, 0x98, 0x4f, 0xbe, 0x57, + 0xa7, 0x22, 0xec, 0xe2, 0x7e, 0x29, 0x09, 0x53, + 0xe8, 0xbf, 0xb4, 0x7e, 0x3f, 0x8f, 0xfc, 0x14, + 0xce, 0x54, 0xf9, 0x18, 0x58, 0xb5, 0xff, 0x44, + 0x05, 0x9d, 0xce, 0x1b, 0xb6, 0x82, 0x23, 0xc8, + 0x2e, 0xbc, 0x69, 0xbb, 0x4a, 0x29, 0x0f, 0x65, + 0x94, 0xf0, 0x63, 0x06, 0x0e, 0xef, 0x8c, 0xbd, + 0xff, 0xfd, 0xb0, 0x21, 0x6e, 0x57, 0x05, 0x75, + 0xda, 0xd5, 0xc4, 0xeb, 0x8d, 0x32, 0xf7, 0x50, + 0xd3, 0x6f, 0x22, 0xed, 0x5f, 0x8e, 0xa2, 0x5b, + 0x80, 0x8c, 0xc8, 0x78, 0x40, 0x24, 0x4b, 0x89, + 0x30, 0xce, 0x7a, 0x97, 0x0e, 0xc4, 0xaf, 0xef, + 0x9b, 0xb4, 0xcd, 0x66, 0x74, 0x14, 0x04, 0x2b, + 0xf7, 0xce, 0x0b, 0x1c, 0x6e, 0xc2, 0x78, 0x8c, + 0xca, 0xc5, 0xd0, 0x1c, 0x95, 0x4a, 0x91, 0x2d, + 0xa7, 0x20, 0xeb, 0x86, 0x52, 0xb7, 0x67, 0xd8, + 0x0c, 0xd6, 0x04, 0x14, 0xde, 0x51, 0x74, 0x75, + 0xe7, 0x11, 0xb4, 0x87, 0xa3, 0x3d, 0x2d, 0xad, + 0x4f, 0xef, 0xa0, 0x0f, 0x70, 0x00, 0x6d, 0x13, + 0x19, 0x1d, 0x41, 0x50, 0xe9, 0xd8, 0xf0, 0x32, + 0x71, 0xbc, 0xd3, 0x11, 0xf2, 0xac, 0xbe, 0xaf, + 0x75, 0x46, 0x65, 0x4e, 0x07, 0x34, 0x37, 0xa3, + 0x89, 0xfe, 0x75, 0xd4, 0x70, 0x4c, 0xc6, 0x3f, + 0x69, 0x24, 0x0e, 0x38, 0x67, 0x43, 0x8c, 0xde, + 0x06, 0xb5, 0xb8, 0xe7, 0xc4, 0xf0, 0x41, 0x8f, + 0xf0, 0xbd, 0x2f, 0x0b, 0xb9, 0x18, 0xf8, 0xde, + 0x64, 0xb1, 0xdb, 0xee, 0x00, 0x50, 0x77, 0xe1, + 0xc7, 0xff, 0xa6, 0xfa, 0xdd, 0x70, 0xf4, 0xe3, + 0x93, 0xe9, 0x77, 0x35, 0x3d, 0x4b, 0x2f, 0x2b, + 0x6d, 0x55, 0xf0, 0xfc, 0x88, 0x54, 0x4e, 0x89, + 0xc1, 0x8a, 0x23, 0x31, 0x2d, 0x14, 0x2a, 0xb8, + 0x1b, 0x15, 0xdd, 0x9e, 0x6e, 0x7b, 0xda, 0x05, + 0x91, 0x7d, 0x62, 0x64, 0x96, 0x72, 0xde, 0xfc, + 0xc1, 0xec, 0xf0, 0x23, 0x51, 0x6f, 0xdb, 0x5b, + 0x1d, 0x08, 0x57, 0xce, 0x09, 0xb8, 0xf6, 0xcd, + 0x8d, 0x95, 0xf2, 0x20, 0xbf, 0x0f, 0x20, 0x57, + 0x98, 0x81, 0x84, 0x4f, 0x15, 0x5c, 0x76, 0xe7, + 0x3e, 0x0a, 0x3a, 0x6c, 0xc4, 0x8a, 0xbe, 0x78, + 0x74, 0x77, 0xc3, 0x09, 0x4b, 0x5d, 0x48, 0xe4, + 0xc8, 0xcb, 0x0b, 0xea, 0x17, 0x28, 0xcf, 0xcf, + 0x31, 0x32, 0x44, 0xa4, 0xe5, 0x0e, 0x1a, 0x98, + 0x94, 0xc4, 0xf0, 0xff, 0xae, 0x3e, 0x44, 0xe8, + 0xa5, 0xb3, 0xb5, 0x37, 0x2f, 0xe8, 0xaf, 0x6f, + 0x28, 0xc1, 0x37, 0x5f, 0x31, 0xd2, 0xb9, 0x33, + 0xb1, 0xb2, 0x52, 0x94, 0x75, 0x2c, 0x29, 0x59, + 0x06, 0xc2, 0x25, 0xe8, 0x71, 0x65, 0x4e, 0xed, + 0xc0, 0x9c, 0xb1, 0xbb, 0x25, 0xdc, 0x6c, 0xe7, + 0x4b, 0xa5, 0x7a, 0x54, 0x7a, 0x60, 0xff, 0x7a, + 0xe0, 0x50, 0x40, 0x96, 0x35, 0x63, 0xe4, 0x0b, + 0x76, 0xbd, 0xa4, 0x65, 0x00, 0x1b, 0x57, 0x88, + 0xae, 0xed, 0x39, 0x88, 0x42, 0x11, 0x3c, 0xed, + 0x85, 0x67, 0x7d, 0xb9, 0x68, 0x82, 0xe9, 0x43, + 0x3c, 0x47, 0x53, 0xfa, 0xe8, 0xf8, 0x9f, 0x1f, + 0x9f, 0xef, 0x0f, 0xf7, 0x30, 0xd9, 0x30, 0x0e, + 0xb9, 0x9f, 0x69, 0x18, 0x2f, 0x7e, 0xf8, 0xf8, + 0xf8, 0x8c, 0x0f, 0xd4, 0x02, 0x4d, 0xea, 0xcd, + 0x0a, 0x9c, 0x6f, 0x71, 0x6d, 0x5a, 0x4c, 0x60, + 0xce, 0x20, 0x56, 0x32, 0xc6, 0xc5, 0x99, 0x1f, + 0x09, 0xe6, 0x4e, 0x18, 0x1a, 0x15, 0x13, 0xa8, + 0x7d, 0xb1, 0x6b, 0xc0, 0xb2, 0x6d, 0xf8, 0x26, + 0x66, 0xf8, 0x3d, 0x18, 0x74, 0x70, 0x66, 0x7a, + 0x34, 0x17, 0xde, 0xba, 0x47, 0xf1, 0x06, 0x18, + 0xcb, 0xaf, 0xeb, 0x4a, 0x1e, 0x8f, 0xa7, 0x77, + 0xe0, 0x3b, 0x78, 0x62, 0x66, 0xc9, 0x10, 0xea, + 0x1f, 0xb7, 0x29, 0x0a, 0x45, 0xa1, 0x1d, 0x1e, + 0x1d, 0xe2, 0x65, 0x61, 0x50, 0x9c, 0xd7, 0x05, + 0xf2, 0x0b, 0x5b, 0x12, 0x61, 0x02, 0xc8, 0xe5, + 0x63, 0x4f, 0x20, 0x0c, 0x07, 0x17, 0x33, 0x5e, + 0x03, 0x9a, 0x53, 0x0f, 0x2e, 0x55, 0xfe, 0x50, + 0x43, 0x7d, 0xd0, 0xb6, 0x7e, 0x5a, 0xda, 0xae, + 0x58, 0xef, 0x15, 0xa9, 0x83, 0xd9, 0x46, 0xb1, + 0x42, 0xaa, 0xf5, 0x02, 0x6c, 0xce, 0x92, 0x06, + 0x1b, 0xdb, 0x66, 0x45, 0x91, 0x79, 0xc2, 0x2d, + 0xe6, 0x53, 0xd3, 0x14, 0xfd, 0xbb, 0x44, 0x63, + 0xc6, 0xd7, 0x3d, 0x7a, 0x0c, 0x75, 0x78, 0x9d, + 0x5c, 0xa6, 0x39, 0xb3, 0xe5, 0x63, 0xca, 0x8b, + 0xfe, 0xd3, 0xef, 0x60, 0x83, 0xf6, 0x8e, 0x70, + 0xb6, 0x67, 0xc7, 0x77, 0xed, 0x23, 0xef, 0x4c, + 0xf0, 0xed, 0x2d, 0x07, 0x59, 0x6f, 0xc1, 0x01, + 0x34, 0x37, 0x08, 0xab, 0xd9, 0x1f, 0x09, 0xb1, + 0xce, 0x5b, 0x17, 0xff, 0x74, 0xf8, 0x9c, 0xd5, + 0x2c, 0x56, 0x39, 0x79, 0x0f, 0x69, 0x44, 0x75, + 0x58, 0x27, 0x01, 0xc4, 0xbf, 0xa7, 0xa1, 0x1d, + 0x90, 0x17, 0x77, 0x86, 0x5a, 0x3f, 0xd9, 0xd1, + 0x0e, 0xa0, 0x10, 0xf8, 0xec, 0x1e, 0xa5, 0x7f, + 0x5e, 0x36, 0xd1, 0xe3, 0x04, 0x2c, 0x70, 0xf7, + 0x8e, 0xc0, 0x98, 0x2f, 0x6c, 0x94, 0x2b, 0x41, + 0xb7, 0x60, 0x00, 0xb7, 0x2e, 0xb8, 0x02, 0x8d, + 0xb8, 0xb0, 0xd3, 0x86, 0xba, 0x1d, 0xd7, 0x90, + 0xd6, 0xb6, 0xe1, 0xfc, 0xd7, 0xd8, 0x28, 0x06, + 0x63, 0x9b, 0xce, 0x61, 0x24, 0x79, 0xc0, 0x70, + 0x52, 0xd0, 0xb6, 0xd4, 0x28, 0x95, 0x24, 0x87, + 0x03, 0x1f, 0xb7, 0x9a, 0xda, 0xa3, 0xfb, 0x52, + 0x5b, 0x68, 0xe7, 0x4c, 0x8c, 0x24, 0xe1, 0x42, + 0xf7, 0xd5, 0xfd, 0xad, 0x06, 0x32, 0x9f, 0xba, + 0xc1, 0xfc, 0xdd, 0xc6, 0xfc, 0xfc, 0xb3, 0x38, + 0x74, 0x56, 0x58, 0x40, 0x02, 0x37, 0x52, 0x2c, + 0x55, 0xcc, 0xb3, 0x9e, 0x7a, 0xe9, 0xd4, 0x38, + 0x41, 0x5e, 0x0c, 0x35, 0xe2, 0x11, 0xd1, 0x13, + 0xf8, 0xb7, 0x8d, 0x72, 0x6b, 0x22, 0x2a, 0xb0, + 0xdb, 0x08, 0xba, 0x35, 0xb9, 0x3f, 0xc8, 0xd3, + 0x24, 0x90, 0xec, 0x58, 0xd2, 0x09, 0xc7, 0x2d, + 0xed, 0x38, 0x80, 0x36, 0x72, 0x43, 0x27, 0x49, + 0x4a, 0x80, 0x8a, 0xa2, 0xe8, 0xd3, 0xda, 0x30, + 0x7d, 0xb6, 0x82, 0x37, 0x86, 0x92, 0x86, 0x3e, + 0x08, 0xb2, 0x28, 0x5a, 0x55, 0x44, 0x24, 0x7d, + 0x40, 0x48, 0x8a, 0xb6, 0x89, 0x58, 0x08, 0xa0, + 0xd6, 0x6d, 0x3a, 0x17, 0xbf, 0xf6, 0x54, 0xa2, + 0xf5, 0xd3, 0x8c, 0x0f, 0x78, 0x12, 0x57, 0x8b, + 0xd5, 0xc2, 0xfd, 0x58, 0x5b, 0x7f, 0x38, 0xe3, + 0xcc, 0xb7, 0x7c, 0x48, 0xb3, 0x20, 0xe8, 0x81, + 0x14, 0x32, 0x45, 0x05, 0xe0, 0xdb, 0x9f, 0x75, + 0x85, 0xb4, 0x6a, 0xfc, 0x95, 0xe3, 0x54, 0x22, + 0x12, 0xee, 0x30, 0xfe, 0xd8, 0x30, 0xef, 0x34, + 0x50, 0xab, 0x46, 0x30, 0x98, 0x2f, 0xb7, 0xc0, + 0x15, 0xa2, 0x83, 0xb6, 0xf2, 0x06, 0x21, 0xa2, + 0xc3, 0x26, 0x37, 0x14, 0xd1, 0x4d, 0xb5, 0x10, + 0x52, 0x76, 0x4d, 0x6a, 0xee, 0xb5, 0x2b, 0x15, + 0xb7, 0xf9, 0x51, 0xe8, 0x2a, 0xaf, 0xc7, 0xfa, + 0x77, 0xaf, 0xb0, 0x05, 0x4d, 0xd1, 0x68, 0x8e, + 0x74, 0x05, 0x9f, 0x9d, 0x93, 0xa5, 0x3e, 0x7f, + 0x4e, 0x5f, 0x9d, 0xcb, 0x09, 0xc7, 0x83, 0xe3, + 0x02, 0x9d, 0x27, 0x1f, 0xef, 0x85, 0x05, 0x8d, + 0xec, 0x55, 0x88, 0x0f, 0x0d, 0x7c, 0x4c, 0xe8, + 0xa1, 0x75, 0xa0, 0xd8, 0x06, 0x47, 0x14, 0xef, + 0xaa, 0x61, 0xcf, 0x26, 0x15, 0xad, 0xd8, 0xa3, + 0xaa, 0x75, 0xf2, 0x78, 0x4a, 0x5a, 0x61, 0xdf, + 0x8b, 0xc7, 0x04, 0xbc, 0xb2, 0x32, 0xd2, 0x7e, + 0x42, 0xee, 0xb4, 0x2f, 0x51, 0xff, 0x7b, 0x2e, + 0xd3, 0x02, 0xe8, 0xdc, 0x5d, 0x0d, 0x50, 0xdc, + 0xae, 0xb7, 0x46, 0xf9, 0xa8, 0xe6, 0xd0, 0x16, + 0xcc, 0xe6, 0x2c, 0x81, 0xc7, 0xad, 0xe9, 0xf0, + 0x05, 0x72, 0x6d, 0x3d, 0x0a, 0x7a, 0xa9, 0x02, + 0xac, 0x82, 0x93, 0x6e, 0xb6, 0x1c, 0x28, 0xfc, + 0x44, 0x12, 0xfb, 0x73, 0x77, 0xd4, 0x13, 0x39, + 0x29, 0x88, 0x8a, 0xf3, 0x5c, 0xa6, 0x36, 0xa0, + 0x2a, 0xed, 0x7e, 0xb1, 0x1d, 0xd6, 0x4c, 0x6b, + 0x41, 0x01, 0x18, 0x5d, 0x5d, 0x07, 0x97, 0xa6, + 0x4b, 0xef, 0x31, 0x18, 0xea, 0xac, 0xb1, 0x84, + 0x21, 0xed, 0xda, 0x86, + }, + .rlen = 4100, }, }; -- cgit v1.2.3-59-g8ed1b From 9617d6ef6278edd04070ae404c871f65a466c6d2 Mon Sep 17 00:00:00 2001 From: Jan Glauber Date: Fri, 30 Nov 2007 15:57:05 +1100 Subject: [CRYPTO] tcrypt: AES CBC test vectors from NIST SP800-38A Add test vectors to tcrypt for AES in CBC mode for key sizes 192 and 256. The test vectors are copied from NIST SP800-38A. Signed-off-by: Jan Glauber Signed-off-by: Herbert Xu --- crypto/tcrypt.h | 106 ++++++++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 104 insertions(+), 2 deletions(-) diff --git a/crypto/tcrypt.h b/crypto/tcrypt.h index d9d97a696811..05aba22ce6db 100644 --- a/crypto/tcrypt.h +++ b/crypto/tcrypt.h @@ -2305,8 +2305,8 @@ static struct cipher_testvec cast6_dec_tv_template[] = { */ #define AES_ENC_TEST_VECTORS 3 #define AES_DEC_TEST_VECTORS 3 -#define AES_CBC_ENC_TEST_VECTORS 2 -#define AES_CBC_DEC_TEST_VECTORS 2 +#define AES_CBC_ENC_TEST_VECTORS 4 +#define AES_CBC_DEC_TEST_VECTORS 4 #define AES_LRW_ENC_TEST_VECTORS 8 #define AES_LRW_DEC_TEST_VECTORS 8 #define AES_XTS_ENC_TEST_VECTORS 4 @@ -2418,6 +2418,57 @@ static struct cipher_testvec aes_cbc_enc_tv_template[] = { 0x75, 0x86, 0x60, 0x2d, 0x25, 0x3c, 0xff, 0xf9, 0x1b, 0x82, 0x66, 0xbe, 0xa6, 0xd6, 0x1a, 0xb1 }, .rlen = 32, + }, { /* From NIST SP800-38A */ + .key = { 0x8e, 0x73, 0xb0, 0xf7, 0xda, 0x0e, 0x64, 0x52, + 0xc8, 0x10, 0xf3, 0x2b, 0x80, 0x90, 0x79, 0xe5, + 0x62, 0xf8, 0xea, 0xd2, 0x52, 0x2c, 0x6b, 0x7b }, + .klen = 24, + .iv = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f }, + .input = { 0x6b, 0xc1, 0xbe, 0xe2, 0x2e, 0x40, 0x9f, 0x96, + 0xe9, 0x3d, 0x7e, 0x11, 0x73, 0x93, 0x17, 0x2a, + 0xae, 0x2d, 0x8a, 0x57, 0x1e, 0x03, 0xac, 0x9c, + 0x9e, 0xb7, 0x6f, 0xac, 0x45, 0xaf, 0x8e, 0x51, + 0x30, 0xc8, 0x1c, 0x46, 0xa3, 0x5c, 0xe4, 0x11, + 0xe5, 0xfb, 0xc1, 0x19, 0x1a, 0x0a, 0x52, 0xef, + 0xf6, 0x9f, 0x24, 0x45, 0xdf, 0x4f, 0x9b, 0x17, + 0xad, 0x2b, 0x41, 0x7b, 0xe6, 0x6c, 0x37, 0x10 }, + .ilen = 64, + .result = { 0x4f, 0x02, 0x1d, 0xb2, 0x43, 0xbc, 0x63, 0x3d, + 0x71, 0x78, 0x18, 0x3a, 0x9f, 0xa0, 0x71, 0xe8, + 0xb4, 0xd9, 0xad, 0xa9, 0xad, 0x7d, 0xed, 0xf4, + 0xe5, 0xe7, 0x38, 0x76, 0x3f, 0x69, 0x14, 0x5a, + 0x57, 0x1b, 0x24, 0x20, 0x12, 0xfb, 0x7a, 0xe0, + 0x7f, 0xa9, 0xba, 0xac, 0x3d, 0xf1, 0x02, 0xe0, + 0x08, 0xb0, 0xe2, 0x79, 0x88, 0x59, 0x88, 0x81, + 0xd9, 0x20, 0xa9, 0xe6, 0x4f, 0x56, 0x15, 0xcd }, + .rlen = 64, + }, { + .key = { 0x60, 0x3d, 0xeb, 0x10, 0x15, 0xca, 0x71, 0xbe, + 0x2b, 0x73, 0xae, 0xf0, 0x85, 0x7d, 0x77, 0x81, + 0x1f, 0x35, 0x2c, 0x07, 0x3b, 0x61, 0x08, 0xd7, + 0x2d, 0x98, 0x10, 0xa3, 0x09, 0x14, 0xdf, 0xf4 }, + .klen = 32, + .iv = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f }, + .input = { 0x6b, 0xc1, 0xbe, 0xe2, 0x2e, 0x40, 0x9f, 0x96, + 0xe9, 0x3d, 0x7e, 0x11, 0x73, 0x93, 0x17, 0x2a, + 0xae, 0x2d, 0x8a, 0x57, 0x1e, 0x03, 0xac, 0x9c, + 0x9e, 0xb7, 0x6f, 0xac, 0x45, 0xaf, 0x8e, 0x51, + 0x30, 0xc8, 0x1c, 0x46, 0xa3, 0x5c, 0xe4, 0x11, + 0xe5, 0xfb, 0xc1, 0x19, 0x1a, 0x0a, 0x52, 0xef, + 0xf6, 0x9f, 0x24, 0x45, 0xdf, 0x4f, 0x9b, 0x17, + 0xad, 0x2b, 0x41, 0x7b, 0xe6, 0x6c, 0x37, 0x10 }, + .ilen = 64, + .result = { 0xf5, 0x8c, 0x4c, 0x04, 0xd6, 0xe5, 0xf1, 0xba, + 0x77, 0x9e, 0xab, 0xfb, 0x5f, 0x7b, 0xfb, 0xd6, + 0x9c, 0xfc, 0x4e, 0x96, 0x7e, 0xdb, 0x80, 0x8d, + 0x67, 0x9f, 0x77, 0x7b, 0xc6, 0x70, 0x2c, 0x7d, + 0x39, 0xf2, 0x33, 0x69, 0xa9, 0xd9, 0xba, 0xcf, + 0xa5, 0x30, 0xe2, 0x63, 0x04, 0x23, 0x14, 0x61, + 0xb2, 0xeb, 0x05, 0xe2, 0xc3, 0x9b, 0xe9, 0xfc, + 0xda, 0x6c, 0x19, 0x07, 0x8c, 0x6a, 0x9d, 0x1b }, + .rlen = 64, }, }; @@ -2449,6 +2500,57 @@ static struct cipher_testvec aes_cbc_dec_tv_template[] = { 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f }, .rlen = 32, + }, { /* From NIST SP800-38A */ + .key = { 0x8e, 0x73, 0xb0, 0xf7, 0xda, 0x0e, 0x64, 0x52, + 0xc8, 0x10, 0xf3, 0x2b, 0x80, 0x90, 0x79, 0xe5, + 0x62, 0xf8, 0xea, 0xd2, 0x52, 0x2c, 0x6b, 0x7b }, + .klen = 24, + .iv = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f }, + .input = { 0x4f, 0x02, 0x1d, 0xb2, 0x43, 0xbc, 0x63, 0x3d, + 0x71, 0x78, 0x18, 0x3a, 0x9f, 0xa0, 0x71, 0xe8, + 0xb4, 0xd9, 0xad, 0xa9, 0xad, 0x7d, 0xed, 0xf4, + 0xe5, 0xe7, 0x38, 0x76, 0x3f, 0x69, 0x14, 0x5a, + 0x57, 0x1b, 0x24, 0x20, 0x12, 0xfb, 0x7a, 0xe0, + 0x7f, 0xa9, 0xba, 0xac, 0x3d, 0xf1, 0x02, 0xe0, + 0x08, 0xb0, 0xe2, 0x79, 0x88, 0x59, 0x88, 0x81, + 0xd9, 0x20, 0xa9, 0xe6, 0x4f, 0x56, 0x15, 0xcd }, + .ilen = 64, + .result = { 0x6b, 0xc1, 0xbe, 0xe2, 0x2e, 0x40, 0x9f, 0x96, + 0xe9, 0x3d, 0x7e, 0x11, 0x73, 0x93, 0x17, 0x2a, + 0xae, 0x2d, 0x8a, 0x57, 0x1e, 0x03, 0xac, 0x9c, + 0x9e, 0xb7, 0x6f, 0xac, 0x45, 0xaf, 0x8e, 0x51, + 0x30, 0xc8, 0x1c, 0x46, 0xa3, 0x5c, 0xe4, 0x11, + 0xe5, 0xfb, 0xc1, 0x19, 0x1a, 0x0a, 0x52, 0xef, + 0xf6, 0x9f, 0x24, 0x45, 0xdf, 0x4f, 0x9b, 0x17, + 0xad, 0x2b, 0x41, 0x7b, 0xe6, 0x6c, 0x37, 0x10 }, + .rlen = 64, + }, { + .key = { 0x60, 0x3d, 0xeb, 0x10, 0x15, 0xca, 0x71, 0xbe, + 0x2b, 0x73, 0xae, 0xf0, 0x85, 0x7d, 0x77, 0x81, + 0x1f, 0x35, 0x2c, 0x07, 0x3b, 0x61, 0x08, 0xd7, + 0x2d, 0x98, 0x10, 0xa3, 0x09, 0x14, 0xdf, 0xf4 }, + .klen = 32, + .iv = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f }, + .input = { 0xf5, 0x8c, 0x4c, 0x04, 0xd6, 0xe5, 0xf1, 0xba, + 0x77, 0x9e, 0xab, 0xfb, 0x5f, 0x7b, 0xfb, 0xd6, + 0x9c, 0xfc, 0x4e, 0x96, 0x7e, 0xdb, 0x80, 0x8d, + 0x67, 0x9f, 0x77, 0x7b, 0xc6, 0x70, 0x2c, 0x7d, + 0x39, 0xf2, 0x33, 0x69, 0xa9, 0xd9, 0xba, 0xcf, + 0xa5, 0x30, 0xe2, 0x63, 0x04, 0x23, 0x14, 0x61, + 0xb2, 0xeb, 0x05, 0xe2, 0xc3, 0x9b, 0xe9, 0xfc, + 0xda, 0x6c, 0x19, 0x07, 0x8c, 0x6a, 0x9d, 0x1b }, + .ilen = 64, + .result = { 0x6b, 0xc1, 0xbe, 0xe2, 0x2e, 0x40, 0x9f, 0x96, + 0xe9, 0x3d, 0x7e, 0x11, 0x73, 0x93, 0x17, 0x2a, + 0xae, 0x2d, 0x8a, 0x57, 0x1e, 0x03, 0xac, 0x9c, + 0x9e, 0xb7, 0x6f, 0xac, 0x45, 0xaf, 0x8e, 0x51, + 0x30, 0xc8, 0x1c, 0x46, 0xa3, 0x5c, 0xe4, 0x11, + 0xe5, 0xfb, 0xc1, 0x19, 0x1a, 0x0a, 0x52, 0xef, + 0xf6, 0x9f, 0x24, 0x45, 0xdf, 0x4f, 0x9b, 0x17, + 0xad, 0x2b, 0x41, 0x7b, 0xe6, 0x6c, 0x37, 0x10 }, + .rlen = 64, }, }; -- cgit v1.2.3-59-g8ed1b From d2456c66236c15d6462f1ac751cdbd48a34e9704 Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Fri, 30 Nov 2007 16:36:57 +1100 Subject: [CRYPTO] geode: do not copy the IV too often There is no reason to keep the IV in the private structre. Instead keep just a pointer to make the patch smaller :) This also remove a few memcpy()s Signed-off-by: Sebastian Siewior Signed-off-by: Herbert Xu --- drivers/crypto/geode-aes.c | 6 ++---- drivers/crypto/geode-aes.h | 2 +- 2 files changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/crypto/geode-aes.c b/drivers/crypto/geode-aes.c index 0ca92d414667..68be7d08aeb3 100644 --- a/drivers/crypto/geode-aes.c +++ b/drivers/crypto/geode-aes.c @@ -315,7 +315,7 @@ geode_cbc_decrypt(struct blkcipher_desc *desc, blkcipher_walk_init(&walk, dst, src, nbytes); err = blkcipher_walk_virt(desc, &walk); - memcpy(op->iv, walk.iv, AES_IV_LENGTH); + op->iv = walk.iv; while((nbytes = walk.nbytes)) { op->src = walk.src.virt.addr, @@ -330,7 +330,6 @@ geode_cbc_decrypt(struct blkcipher_desc *desc, err = blkcipher_walk_done(desc, &walk, nbytes); } - memcpy(walk.iv, op->iv, AES_IV_LENGTH); return err; } @@ -348,7 +347,7 @@ geode_cbc_encrypt(struct blkcipher_desc *desc, blkcipher_walk_init(&walk, dst, src, nbytes); err = blkcipher_walk_virt(desc, &walk); - memcpy(op->iv, walk.iv, AES_IV_LENGTH); + op->iv = walk.iv; while((nbytes = walk.nbytes)) { op->src = walk.src.virt.addr, @@ -362,7 +361,6 @@ geode_cbc_encrypt(struct blkcipher_desc *desc, err = blkcipher_walk_done(desc, &walk, nbytes); } - memcpy(walk.iv, op->iv, AES_IV_LENGTH); return err; } diff --git a/drivers/crypto/geode-aes.h b/drivers/crypto/geode-aes.h index 14cc763da1e4..f1855b50da48 100644 --- a/drivers/crypto/geode-aes.h +++ b/drivers/crypto/geode-aes.h @@ -65,7 +65,7 @@ struct geode_aes_op { int len; u8 key[AES_KEY_LENGTH]; - u8 iv[AES_IV_LENGTH]; + u8 *iv; union { struct crypto_blkcipher *blk; -- cgit v1.2.3-59-g8ed1b From a10e11946bb2d59516a5252b1b588e2963a13ebe Mon Sep 17 00:00:00 2001 From: Denis Cheng Date: Fri, 30 Nov 2007 16:59:30 +1100 Subject: [CRYPTO] tcrypt: Use print_hex_dump from linux/kernel.h These utilities implemented in lib/hexdump.c are more handy, please use this. Signed-off-by: Denis Cheng Signed-off-by: Herbert Xu --- crypto/tcrypt.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c index 71dc02ae8a43..387d1053f11a 100644 --- a/crypto/tcrypt.c +++ b/crypto/tcrypt.c @@ -89,10 +89,9 @@ static char *check[] = { static void hexdump(unsigned char *buf, unsigned int len) { - while (len--) - printk("%02x", *buf++); - - printk("\n"); + print_hex_dump(KERN_CONT, "", DUMP_PREFIX_OFFSET, + 16, 1, + buf, len, false); } static void tcrypt_complete(struct crypto_async_request *req, int err) -- cgit v1.2.3-59-g8ed1b From b0c3e75d857f3785a4b274e26b1c0b2327580dda Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Sat, 1 Dec 2007 12:47:37 +1100 Subject: [CRYPTO] aes_s390: Add fallback driver Some CPUs support only 128 bit keys in HW. This patch adds SW fallback support for the other keys which may be required. The generic algorithm (and the block mode) must be availble in case of a fallback. Signed-off-by: Sebastian Siewior Signed-off-by: Jan Glauber Signed-off-by: Herbert Xu --- arch/s390/crypto/aes_s390.c | 226 ++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 205 insertions(+), 21 deletions(-) diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c index 812511bbb540..85246112ab5e 100644 --- a/arch/s390/crypto/aes_s390.c +++ b/arch/s390/crypto/aes_s390.c @@ -6,6 +6,7 @@ * s390 Version: * Copyright IBM Corp. 2005,2007 * Author(s): Jan Glauber (jang@de.ibm.com) + * Sebastian Siewior (sebastian@breakpoint.cc> SW-Fallback * * Derived from "crypto/aes_generic.c" * @@ -18,6 +19,7 @@ #include #include +#include #include #include #include "crypt_s390.h" @@ -34,45 +36,89 @@ struct s390_aes_ctx { long enc; long dec; int key_len; + union { + struct crypto_blkcipher *blk; + struct crypto_cipher *cip; + } fallback; }; -static int aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, - unsigned int key_len) +/* + * Check if the key_len is supported by the HW. + * Returns 0 if it is, a positive number if it is not and software fallback is + * required or a negative number in case the key size is not valid + */ +static int need_fallback(unsigned int key_len) { - struct s390_aes_ctx *sctx = crypto_tfm_ctx(tfm); - u32 *flags = &tfm->crt_flags; - switch (key_len) { case 16: if (!(keylen_flag & AES_KEYLEN_128)) - goto fail; + return 1; break; case 24: if (!(keylen_flag & AES_KEYLEN_192)) - goto fail; - + return 1; break; case 32: if (!(keylen_flag & AES_KEYLEN_256)) - goto fail; + return 1; break; default: - goto fail; + return -1; break; } + return 0; +} + +static int setkey_fallback_cip(struct crypto_tfm *tfm, const u8 *in_key, + unsigned int key_len) +{ + struct s390_aes_ctx *sctx = crypto_tfm_ctx(tfm); + int ret; + + sctx->fallback.blk->base.crt_flags &= ~CRYPTO_TFM_REQ_MASK; + sctx->fallback.blk->base.crt_flags |= (tfm->crt_flags & + CRYPTO_TFM_REQ_MASK); + + ret = crypto_cipher_setkey(sctx->fallback.cip, in_key, key_len); + if (ret) { + tfm->crt_flags &= ~CRYPTO_TFM_RES_MASK; + tfm->crt_flags |= (sctx->fallback.blk->base.crt_flags & + CRYPTO_TFM_RES_MASK); + } + return ret; +} + +static int aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, + unsigned int key_len) +{ + struct s390_aes_ctx *sctx = crypto_tfm_ctx(tfm); + u32 *flags = &tfm->crt_flags; + int ret; + + ret = need_fallback(key_len); + if (ret < 0) { + *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + return -EINVAL; + } sctx->key_len = key_len; - memcpy(sctx->key, in_key, key_len); - return 0; -fail: - *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; - return -EINVAL; + if (!ret) { + memcpy(sctx->key, in_key, key_len); + return 0; + } + + return setkey_fallback_cip(tfm, in_key, key_len); } static void aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) { const struct s390_aes_ctx *sctx = crypto_tfm_ctx(tfm); + if (unlikely(need_fallback(sctx->key_len))) { + crypto_cipher_encrypt_one(sctx->fallback.cip, out, in); + return; + } + switch (sctx->key_len) { case 16: crypt_s390_km(KM_AES_128_ENCRYPT, &sctx->key, out, in, @@ -93,6 +139,11 @@ static void aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) { const struct s390_aes_ctx *sctx = crypto_tfm_ctx(tfm); + if (unlikely(need_fallback(sctx->key_len))) { + crypto_cipher_decrypt_one(sctx->fallback.cip, out, in); + return; + } + switch (sctx->key_len) { case 16: crypt_s390_km(KM_AES_128_DECRYPT, &sctx->key, out, in, @@ -109,6 +160,29 @@ static void aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) } } +static int fallback_init_cip(struct crypto_tfm *tfm) +{ + const char *name = tfm->__crt_alg->cra_name; + struct s390_aes_ctx *sctx = crypto_tfm_ctx(tfm); + + sctx->fallback.cip = crypto_alloc_cipher(name, 0, + CRYPTO_ALG_ASYNC | CRYPTO_ALG_NEED_FALLBACK); + + if (IS_ERR(sctx->fallback.cip)) { + printk(KERN_ERR "Error allocating fallback algo %s\n", name); + return PTR_ERR(sctx->fallback.blk); + } + + return 0; +} + +static void fallback_exit_cip(struct crypto_tfm *tfm) +{ + struct s390_aes_ctx *sctx = crypto_tfm_ctx(tfm); + + crypto_free_cipher(sctx->fallback.cip); + sctx->fallback.cip = NULL; +} static struct crypto_alg aes_alg = { .cra_name = "aes", @@ -120,6 +194,8 @@ static struct crypto_alg aes_alg = { .cra_ctxsize = sizeof(struct s390_aes_ctx), .cra_module = THIS_MODULE, .cra_list = LIST_HEAD_INIT(aes_alg.cra_list), + .cra_init = fallback_init_cip, + .cra_exit = fallback_exit_cip, .cra_u = { .cipher = { .cia_min_keysize = AES_MIN_KEY_SIZE, @@ -131,10 +207,76 @@ static struct crypto_alg aes_alg = { } }; +static int setkey_fallback_blk(struct crypto_tfm *tfm, const u8 *key, + unsigned int len) +{ + struct s390_aes_ctx *sctx = crypto_tfm_ctx(tfm); + unsigned int ret; + + sctx->fallback.blk->base.crt_flags &= ~CRYPTO_TFM_REQ_MASK; + sctx->fallback.blk->base.crt_flags |= (tfm->crt_flags & + CRYPTO_TFM_REQ_MASK); + + ret = crypto_blkcipher_setkey(sctx->fallback.blk, key, len); + if (ret) { + tfm->crt_flags &= ~CRYPTO_TFM_RES_MASK; + tfm->crt_flags |= (sctx->fallback.blk->base.crt_flags & + CRYPTO_TFM_RES_MASK); + } + return ret; +} + +static int fallback_blk_dec(struct blkcipher_desc *desc, + struct scatterlist *dst, struct scatterlist *src, + unsigned int nbytes) +{ + unsigned int ret; + struct crypto_blkcipher *tfm; + struct s390_aes_ctx *sctx = crypto_blkcipher_ctx(desc->tfm); + + memcpy(crypto_blkcipher_crt(sctx->fallback.blk)->iv, desc->info, + AES_BLOCK_SIZE); + + tfm = desc->tfm; + desc->tfm = sctx->fallback.blk; + + ret = crypto_blkcipher_decrypt(desc, dst, src, nbytes); + + desc->tfm = tfm; + return ret; +} + +static int fallback_blk_enc(struct blkcipher_desc *desc, + struct scatterlist *dst, struct scatterlist *src, + unsigned int nbytes) +{ + unsigned int ret; + struct crypto_blkcipher *tfm; + struct s390_aes_ctx *sctx = crypto_blkcipher_ctx(desc->tfm); + + memcpy(crypto_blkcipher_crt(sctx->fallback.blk)->iv, desc->info, + AES_BLOCK_SIZE); + + tfm = desc->tfm; + desc->tfm = sctx->fallback.blk; + + ret = crypto_blkcipher_encrypt(desc, dst, src, nbytes); + + desc->tfm = tfm; + return ret; +} + static int ecb_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, unsigned int key_len) { struct s390_aes_ctx *sctx = crypto_tfm_ctx(tfm); + int ret; + + ret = need_fallback(key_len); + if (ret > 0) { + sctx->key_len = key_len; + return setkey_fallback_blk(tfm, in_key, key_len); + } switch (key_len) { case 16: @@ -183,6 +325,9 @@ static int ecb_aes_encrypt(struct blkcipher_desc *desc, struct s390_aes_ctx *sctx = crypto_blkcipher_ctx(desc->tfm); struct blkcipher_walk walk; + if (unlikely(need_fallback(sctx->key_len))) + return fallback_blk_enc(desc, dst, src, nbytes); + blkcipher_walk_init(&walk, dst, src, nbytes); return ecb_aes_crypt(desc, sctx->enc, sctx->key, &walk); } @@ -194,10 +339,37 @@ static int ecb_aes_decrypt(struct blkcipher_desc *desc, struct s390_aes_ctx *sctx = crypto_blkcipher_ctx(desc->tfm); struct blkcipher_walk walk; + if (unlikely(need_fallback(sctx->key_len))) + return fallback_blk_dec(desc, dst, src, nbytes); + blkcipher_walk_init(&walk, dst, src, nbytes); return ecb_aes_crypt(desc, sctx->dec, sctx->key, &walk); } +static int fallback_init_blk(struct crypto_tfm *tfm) +{ + const char *name = tfm->__crt_alg->cra_name; + struct s390_aes_ctx *sctx = crypto_tfm_ctx(tfm); + + sctx->fallback.blk = crypto_alloc_blkcipher(name, 0, + CRYPTO_ALG_ASYNC | CRYPTO_ALG_NEED_FALLBACK); + + if (IS_ERR(sctx->fallback.blk)) { + printk(KERN_ERR "Error allocating fallback algo %s\n", name); + return PTR_ERR(sctx->fallback.blk); + } + + return 0; +} + +static void fallback_exit_blk(struct crypto_tfm *tfm) +{ + struct s390_aes_ctx *sctx = crypto_tfm_ctx(tfm); + + crypto_free_blkcipher(sctx->fallback.blk); + sctx->fallback.blk = NULL; +} + static struct crypto_alg ecb_aes_alg = { .cra_name = "ecb(aes)", .cra_driver_name = "ecb-aes-s390", @@ -209,6 +381,8 @@ static struct crypto_alg ecb_aes_alg = { .cra_type = &crypto_blkcipher_type, .cra_module = THIS_MODULE, .cra_list = LIST_HEAD_INIT(ecb_aes_alg.cra_list), + .cra_init = fallback_init_blk, + .cra_exit = fallback_exit_blk, .cra_u = { .blkcipher = { .min_keysize = AES_MIN_KEY_SIZE, @@ -224,6 +398,13 @@ static int cbc_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, unsigned int key_len) { struct s390_aes_ctx *sctx = crypto_tfm_ctx(tfm); + int ret; + + ret = need_fallback(key_len); + if (ret > 0) { + sctx->key_len = key_len; + return setkey_fallback_blk(tfm, in_key, key_len); + } switch (key_len) { case 16: @@ -278,6 +459,9 @@ static int cbc_aes_encrypt(struct blkcipher_desc *desc, struct s390_aes_ctx *sctx = crypto_blkcipher_ctx(desc->tfm); struct blkcipher_walk walk; + if (unlikely(need_fallback(sctx->key_len))) + return fallback_blk_enc(desc, dst, src, nbytes); + blkcipher_walk_init(&walk, dst, src, nbytes); return cbc_aes_crypt(desc, sctx->enc, sctx->iv, &walk); } @@ -289,6 +473,9 @@ static int cbc_aes_decrypt(struct blkcipher_desc *desc, struct s390_aes_ctx *sctx = crypto_blkcipher_ctx(desc->tfm); struct blkcipher_walk walk; + if (unlikely(need_fallback(sctx->key_len))) + return fallback_blk_dec(desc, dst, src, nbytes); + blkcipher_walk_init(&walk, dst, src, nbytes); return cbc_aes_crypt(desc, sctx->dec, sctx->iv, &walk); } @@ -304,6 +491,8 @@ static struct crypto_alg cbc_aes_alg = { .cra_type = &crypto_blkcipher_type, .cra_module = THIS_MODULE, .cra_list = LIST_HEAD_INIT(cbc_aes_alg.cra_list), + .cra_init = fallback_init_blk, + .cra_exit = fallback_exit_blk, .cra_u = { .blkcipher = { .min_keysize = AES_MIN_KEY_SIZE, @@ -331,14 +520,10 @@ static int __init aes_init(void) return -EOPNOTSUPP; /* z9 109 and z9 BC/EC only support 128 bit key length */ - if (keylen_flag == AES_KEYLEN_128) { - aes_alg.cra_u.cipher.cia_max_keysize = AES_MIN_KEY_SIZE; - ecb_aes_alg.cra_u.blkcipher.max_keysize = AES_MIN_KEY_SIZE; - cbc_aes_alg.cra_u.blkcipher.max_keysize = AES_MIN_KEY_SIZE; + if (keylen_flag == AES_KEYLEN_128) printk(KERN_INFO "aes_s390: hardware acceleration only available for" "128 bit keys\n"); - } ret = crypto_register_alg(&aes_alg); if (ret) @@ -377,4 +562,3 @@ MODULE_ALIAS("aes"); MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm"); MODULE_LICENSE("GPL"); - -- cgit v1.2.3-59-g8ed1b From 9aa6ad3e87af58b4fc87bd4beef1d4c6d9a4c5b7 Mon Sep 17 00:00:00 2001 From: Kamalesh Babulal Date: Sat, 1 Dec 2007 12:52:35 +1100 Subject: [HWRNG] pasemi: Add missing wait argument to data_present drivers/char/hw_random/pasemi-rng.c: In function `pasemi_rng_data_present': drivers/char/hw_random/pasemi-rng.c:53: error: `wait' undeclared (first use in this function) drivers/char/hw_random/pasemi-rng.c:53: error: (Each undeclared identifier is reported only once drivers/char/hw_random/pasemi-rng.c:53: error: for each function it appears in.) drivers/char/hw_random/pasemi-rng.c: At top level: drivers/char/hw_random/pasemi-rng.c:93: warning: initialization from incompatible pointer type Signed-off-by: Kamalesh Babulal Signed-off-by: Andrew Morton Signed-off-by: Herbert Xu --- drivers/char/hw_random/pasemi-rng.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/hw_random/pasemi-rng.c b/drivers/char/hw_random/pasemi-rng.c index 621adf25e580..e2ea210cfa5f 100644 --- a/drivers/char/hw_random/pasemi-rng.c +++ b/drivers/char/hw_random/pasemi-rng.c @@ -42,7 +42,7 @@ #define MODULE_NAME "pasemi_rng" -static int pasemi_rng_data_present(struct hwrng *rng) +static int pasemi_rng_data_present(struct hwrng *rng, int wait) { void __iomem *rng_regs = (void __iomem *)rng->priv; int data, i; -- cgit v1.2.3-59-g8ed1b From e29bc6ad0e84e3157e0f49130a15b278cb232c72 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 22 Nov 2007 22:46:40 +0800 Subject: [CRYPTO] authenc: Use or instead of max on alignment masks Since alignment masks are always one less than a power of two, we can use binary or to find their maximum. Signed-off-by: Herbert Xu --- crypto/authenc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/crypto/authenc.c b/crypto/authenc.c index bc4e608ca841..66fb2aa5c325 100644 --- a/crypto/authenc.c +++ b/crypto/authenc.c @@ -333,7 +333,7 @@ static struct crypto_instance *crypto_authenc_alloc(struct rtattr **tb) inst->alg.cra_flags = CRYPTO_ALG_TYPE_AEAD | CRYPTO_ALG_ASYNC; inst->alg.cra_priority = enc->cra_priority * 10 + auth->cra_priority; inst->alg.cra_blocksize = enc->cra_blocksize; - inst->alg.cra_alignmask = max(auth->cra_alignmask, enc->cra_alignmask); + inst->alg.cra_alignmask = auth->cra_alignmask | enc->cra_alignmask; inst->alg.cra_type = &crypto_aead_type; inst->alg.cra_aead.ivsize = enc->cra_blkcipher.ivsize; -- cgit v1.2.3-59-g8ed1b From 7ba683a6deba70251756aa5a021cdaa5c875a7a2 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 2 Dec 2007 18:49:21 +1100 Subject: [CRYPTO] aead: Make authsize a run-time parameter As it is authsize is an algorithm paramter which cannot be changed at run-time. This is inconvenient because hardware that implements such algorithms would have to register each authsize that they support separately. Since authsize is a property common to all AEAD algorithms, we can add a function setauthsize that sets it at run-time, just like setkey. This patch does exactly that and also changes authenc so that authsize is no longer a parameter of its template. Signed-off-by: Herbert Xu --- crypto/aead.c | 24 +++++++++++++++++++++--- crypto/authenc.c | 39 ++++++++++++--------------------------- crypto/gcm.c | 2 +- include/linux/crypto.h | 5 ++++- 4 files changed, 38 insertions(+), 32 deletions(-) diff --git a/crypto/aead.c b/crypto/aead.c index 84a3501fb478..f23c2b0ee009 100644 --- a/crypto/aead.c +++ b/crypto/aead.c @@ -53,6 +53,24 @@ static int setkey(struct crypto_aead *tfm, const u8 *key, unsigned int keylen) return aead->setkey(tfm, key, keylen); } +int crypto_aead_setauthsize(struct crypto_aead *tfm, unsigned int authsize) +{ + int err; + + if (authsize > crypto_aead_alg(tfm)->maxauthsize) + return -EINVAL; + + if (crypto_aead_alg(tfm)->setauthsize) { + err = crypto_aead_alg(tfm)->setauthsize(tfm, authsize); + if (err) + return err; + } + + crypto_aead_crt(tfm)->authsize = authsize; + return 0; +} +EXPORT_SYMBOL_GPL(crypto_aead_setauthsize); + static unsigned int crypto_aead_ctxsize(struct crypto_alg *alg, u32 type, u32 mask) { @@ -64,14 +82,14 @@ static int crypto_init_aead_ops(struct crypto_tfm *tfm, u32 type, u32 mask) struct aead_alg *alg = &tfm->__crt_alg->cra_aead; struct aead_tfm *crt = &tfm->crt_aead; - if (max(alg->authsize, alg->ivsize) > PAGE_SIZE / 8) + if (max(alg->maxauthsize, alg->ivsize) > PAGE_SIZE / 8) return -EINVAL; crt->setkey = setkey; crt->encrypt = alg->encrypt; crt->decrypt = alg->decrypt; crt->ivsize = alg->ivsize; - crt->authsize = alg->authsize; + crt->authsize = alg->maxauthsize; return 0; } @@ -85,7 +103,7 @@ static void crypto_aead_show(struct seq_file *m, struct crypto_alg *alg) seq_printf(m, "type : aead\n"); seq_printf(m, "blocksize : %u\n", alg->cra_blocksize); seq_printf(m, "ivsize : %u\n", aead->ivsize); - seq_printf(m, "authsize : %u\n", aead->authsize); + seq_printf(m, "maxauthsize : %u\n", aead->maxauthsize); } const struct crypto_type crypto_aead_type = { diff --git a/crypto/authenc.c b/crypto/authenc.c index 66fb2aa5c325..5df5fb169cbe 100644 --- a/crypto/authenc.c +++ b/crypto/authenc.c @@ -24,7 +24,6 @@ struct authenc_instance_ctx { struct crypto_spawn auth; struct crypto_spawn enc; - unsigned int authsize; unsigned int enckeylen; }; @@ -76,8 +75,6 @@ out: static int crypto_authenc_hash(struct aead_request *req) { struct crypto_aead *authenc = crypto_aead_reqtfm(req); - struct authenc_instance_ctx *ictx = - crypto_instance_ctx(crypto_aead_alg_instance(authenc)); struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc); struct crypto_hash *auth = ctx->auth; struct hash_desc desc = { @@ -111,7 +108,8 @@ auth_unlock: if (err) return err; - scatterwalk_map_and_copy(hash, dst, cryptlen, ictx->authsize, 1); + scatterwalk_map_and_copy(hash, dst, cryptlen, + crypto_aead_authsize(authenc), 1); return 0; } @@ -147,8 +145,6 @@ static int crypto_authenc_encrypt(struct aead_request *req) static int crypto_authenc_verify(struct aead_request *req) { struct crypto_aead *authenc = crypto_aead_reqtfm(req); - struct authenc_instance_ctx *ictx = - crypto_instance_ctx(crypto_aead_alg_instance(authenc)); struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc); struct crypto_hash *auth = ctx->auth; struct hash_desc desc = { @@ -186,7 +182,7 @@ auth_unlock: if (err) return err; - authsize = ictx->authsize; + authsize = crypto_aead_authsize(authenc); scatterwalk_map_and_copy(ihash, src, cryptlen, authsize, 0); return memcmp(ihash, ohash, authsize) ? -EINVAL : 0; } @@ -224,18 +220,12 @@ static int crypto_authenc_init_tfm(struct crypto_tfm *tfm) struct crypto_authenc_ctx *ctx = crypto_tfm_ctx(tfm); struct crypto_hash *auth; struct crypto_ablkcipher *enc; - unsigned int digestsize; int err; auth = crypto_spawn_hash(&ictx->auth); if (IS_ERR(auth)) return PTR_ERR(auth); - err = -EINVAL; - digestsize = crypto_hash_digestsize(auth); - if (ictx->authsize > digestsize) - goto err_free_hash; - enc = crypto_spawn_ablkcipher(&ictx->enc); err = PTR_ERR(enc); if (IS_ERR(enc)) @@ -246,7 +236,7 @@ static int crypto_authenc_init_tfm(struct crypto_tfm *tfm) tfm->crt_aead.reqsize = max_t(unsigned int, (crypto_hash_alignmask(auth) & ~(crypto_tfm_ctx_alignment() - 1)) + - digestsize * 2, + crypto_hash_digestsize(auth) * 2, sizeof(struct ablkcipher_request) + crypto_ablkcipher_reqsize(enc)); @@ -273,7 +263,6 @@ static struct crypto_instance *crypto_authenc_alloc(struct rtattr **tb) struct crypto_alg *auth; struct crypto_alg *enc; struct authenc_instance_ctx *ctx; - unsigned int authsize; unsigned int enckeylen; int err; @@ -286,18 +275,13 @@ static struct crypto_instance *crypto_authenc_alloc(struct rtattr **tb) if (IS_ERR(auth)) return ERR_PTR(PTR_ERR(auth)); - err = crypto_attr_u32(tb[2], &authsize); - inst = ERR_PTR(err); - if (err) - goto out_put_auth; - - enc = crypto_attr_alg(tb[3], CRYPTO_ALG_TYPE_BLKCIPHER, + enc = crypto_attr_alg(tb[2], CRYPTO_ALG_TYPE_BLKCIPHER, CRYPTO_ALG_TYPE_BLKCIPHER_MASK); inst = ERR_PTR(PTR_ERR(enc)); if (IS_ERR(enc)) goto out_put_auth; - err = crypto_attr_u32(tb[4], &enckeylen); + err = crypto_attr_u32(tb[3], &enckeylen); if (err) goto out_put_enc; @@ -308,18 +292,17 @@ static struct crypto_instance *crypto_authenc_alloc(struct rtattr **tb) err = -ENAMETOOLONG; if (snprintf(inst->alg.cra_name, CRYPTO_MAX_ALG_NAME, - "authenc(%s,%u,%s,%u)", auth->cra_name, authsize, + "authenc(%s,%s,%u)", auth->cra_name, enc->cra_name, enckeylen) >= CRYPTO_MAX_ALG_NAME) goto err_free_inst; if (snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME, - "authenc(%s,%u,%s,%u)", auth->cra_driver_name, - authsize, enc->cra_driver_name, enckeylen) >= + "authenc(%s,%s,%u)", auth->cra_driver_name, + enc->cra_driver_name, enckeylen) >= CRYPTO_MAX_ALG_NAME) goto err_free_inst; ctx = crypto_instance_ctx(inst); - ctx->authsize = authsize; ctx->enckeylen = enckeylen; err = crypto_init_spawn(&ctx->auth, auth, inst, CRYPTO_ALG_TYPE_MASK); @@ -337,7 +320,9 @@ static struct crypto_instance *crypto_authenc_alloc(struct rtattr **tb) inst->alg.cra_type = &crypto_aead_type; inst->alg.cra_aead.ivsize = enc->cra_blkcipher.ivsize; - inst->alg.cra_aead.authsize = authsize; + inst->alg.cra_aead.maxauthsize = auth->cra_type == &crypto_hash_type ? + auth->cra_hash.digestsize : + auth->cra_digest.dia_digestsize; inst->alg.cra_ctxsize = sizeof(struct crypto_authenc_ctx); diff --git a/crypto/gcm.c b/crypto/gcm.c index ad8b8b9aeef2..5681c7957b88 100644 --- a/crypto/gcm.c +++ b/crypto/gcm.c @@ -414,7 +414,7 @@ static struct crypto_instance *crypto_gcm_alloc(struct rtattr **tb) inst->alg.cra_alignmask = __alignof__(u32) - 1; inst->alg.cra_type = &crypto_aead_type; inst->alg.cra_aead.ivsize = 12; - inst->alg.cra_aead.authsize = 16; + inst->alg.cra_aead.maxauthsize = 16; inst->alg.cra_ctxsize = sizeof(struct crypto_gcm_ctx); inst->alg.cra_init = crypto_gcm_init_tfm; inst->alg.cra_exit = crypto_gcm_exit_tfm; diff --git a/include/linux/crypto.h b/include/linux/crypto.h index f56ae8721bc9..48aa5959abbb 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -187,11 +187,12 @@ struct ablkcipher_alg { struct aead_alg { int (*setkey)(struct crypto_aead *tfm, const u8 *key, unsigned int keylen); + int (*setauthsize)(struct crypto_aead *tfm, unsigned int authsize); int (*encrypt)(struct aead_request *req); int (*decrypt)(struct aead_request *req); unsigned int ivsize; - unsigned int authsize; + unsigned int maxauthsize; }; struct blkcipher_alg { @@ -754,6 +755,8 @@ static inline int crypto_aead_setkey(struct crypto_aead *tfm, const u8 *key, return crypto_aead_crt(tfm)->setkey(tfm, key, keylen); } +int crypto_aead_setauthsize(struct crypto_aead *tfm, unsigned int authsize); + static inline struct crypto_aead *crypto_aead_reqtfm(struct aead_request *req) { return __crypto_aead_cast(req->base.tfm); -- cgit v1.2.3-59-g8ed1b From e236d4a89a2ffbc8aa18064161f4f159c4d89b4a Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 22 Nov 2007 23:11:53 +0800 Subject: [CRYPTO] authenc: Move enckeylen into key itself Having enckeylen as a template parameter makes it a pain for hardware devices that implement ciphers with many key sizes since each one would have to be registered separately. Since the authenc algorithm is mainly used for legacy purposes where its key is going to be constructed out of two separate keys, we can in fact embed this value into the key itself. This patch does this by prepending an rtnetlink header to the key that contains the encryption key length. Signed-off-by: Herbert Xu --- crypto/authenc.c | 49 ++++++++++++++++++++++++++++-------------------- include/crypto/authenc.h | 27 ++++++++++++++++++++++++++ 2 files changed, 56 insertions(+), 20 deletions(-) create mode 100644 include/crypto/authenc.h diff --git a/crypto/authenc.c b/crypto/authenc.c index 5df5fb169cbe..a61dea1c2fe6 100644 --- a/crypto/authenc.c +++ b/crypto/authenc.c @@ -11,10 +11,12 @@ */ #include +#include #include #include #include #include +#include #include #include @@ -23,8 +25,6 @@ struct authenc_instance_ctx { struct crypto_spawn auth; struct crypto_spawn enc; - - unsigned int enckeylen; }; struct crypto_authenc_ctx { @@ -36,19 +36,31 @@ struct crypto_authenc_ctx { static int crypto_authenc_setkey(struct crypto_aead *authenc, const u8 *key, unsigned int keylen) { - struct authenc_instance_ctx *ictx = - crypto_instance_ctx(crypto_aead_alg_instance(authenc)); - unsigned int enckeylen = ictx->enckeylen; unsigned int authkeylen; + unsigned int enckeylen; struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc); struct crypto_hash *auth = ctx->auth; struct crypto_ablkcipher *enc = ctx->enc; + struct rtattr *rta = (void *)key; + struct crypto_authenc_key_param *param; int err = -EINVAL; - if (keylen < enckeylen) { - crypto_aead_set_flags(authenc, CRYPTO_TFM_RES_BAD_KEY_LEN); - goto out; - } + if (keylen < sizeof(*rta)) + goto badkey; + if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM) + goto badkey; + if (RTA_PAYLOAD(rta) < sizeof(*param)) + goto badkey; + + param = RTA_DATA(rta); + enckeylen = be32_to_cpu(param->enckeylen); + + key += RTA_ALIGN(rta->rta_len); + keylen -= RTA_ALIGN(rta->rta_len); + + if (keylen < enckeylen) + goto badkey; + authkeylen = keylen - enckeylen; crypto_hash_clear_flags(auth, CRYPTO_TFM_REQ_MASK); @@ -70,6 +82,10 @@ static int crypto_authenc_setkey(struct crypto_aead *authenc, const u8 *key, out: return err; + +badkey: + crypto_aead_set_flags(authenc, CRYPTO_TFM_RES_BAD_KEY_LEN); + goto out; } static int crypto_authenc_hash(struct aead_request *req) @@ -263,7 +279,6 @@ static struct crypto_instance *crypto_authenc_alloc(struct rtattr **tb) struct crypto_alg *auth; struct crypto_alg *enc; struct authenc_instance_ctx *ctx; - unsigned int enckeylen; int err; err = crypto_check_attr_type(tb, CRYPTO_ALG_TYPE_AEAD); @@ -281,10 +296,6 @@ static struct crypto_instance *crypto_authenc_alloc(struct rtattr **tb) if (IS_ERR(enc)) goto out_put_auth; - err = crypto_attr_u32(tb[3], &enckeylen); - if (err) - goto out_put_enc; - inst = kzalloc(sizeof(*inst) + sizeof(*ctx), GFP_KERNEL); err = -ENOMEM; if (!inst) @@ -292,18 +303,16 @@ static struct crypto_instance *crypto_authenc_alloc(struct rtattr **tb) err = -ENAMETOOLONG; if (snprintf(inst->alg.cra_name, CRYPTO_MAX_ALG_NAME, - "authenc(%s,%s,%u)", auth->cra_name, - enc->cra_name, enckeylen) >= CRYPTO_MAX_ALG_NAME) + "authenc(%s,%s)", auth->cra_name, enc->cra_name) >= + CRYPTO_MAX_ALG_NAME) goto err_free_inst; if (snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME, - "authenc(%s,%s,%u)", auth->cra_driver_name, - enc->cra_driver_name, enckeylen) >= - CRYPTO_MAX_ALG_NAME) + "authenc(%s,%s)", auth->cra_driver_name, + enc->cra_driver_name) >= CRYPTO_MAX_ALG_NAME) goto err_free_inst; ctx = crypto_instance_ctx(inst); - ctx->enckeylen = enckeylen; err = crypto_init_spawn(&ctx->auth, auth, inst, CRYPTO_ALG_TYPE_MASK); if (err) diff --git a/include/crypto/authenc.h b/include/crypto/authenc.h new file mode 100644 index 000000000000..e47b044929a8 --- /dev/null +++ b/include/crypto/authenc.h @@ -0,0 +1,27 @@ +/* + * Authenc: Simple AEAD wrapper for IPsec + * + * Copyright (c) 2007 Herbert Xu + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ +#ifndef _CRYPTO_AUTHENC_H +#define _CRYPTO_AUTHENC_H + +#include + +enum { + CRYPTO_AUTHENC_KEYA_UNSPEC, + CRYPTO_AUTHENC_KEYA_PARAM, +}; + +struct crypto_authenc_key_param { + __be32 enckeylen; +}; + +#endif /* _CRYPTO_AUTHENC_H */ + -- cgit v1.2.3-59-g8ed1b From 481f34ae752ac74c4cbd88a9954dd4ed10e84f81 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 4 Dec 2007 20:04:21 +1100 Subject: [CRYPTO] authenc: Fix hash verification The previous code incorrectly included the hash in the verification which also meant that we'd crash and burn when it comes to actually verifying the hash since we'd go past the end of the SG list. This patch fixes that by subtracting authsize from cryptlen at the start. Signed-off-by: Herbert Xu --- crypto/authenc.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/crypto/authenc.c b/crypto/authenc.c index a61dea1c2fe6..82e03ffa6245 100644 --- a/crypto/authenc.c +++ b/crypto/authenc.c @@ -158,7 +158,8 @@ static int crypto_authenc_encrypt(struct aead_request *req) return crypto_authenc_hash(req); } -static int crypto_authenc_verify(struct aead_request *req) +static int crypto_authenc_verify(struct aead_request *req, + unsigned int cryptlen) { struct crypto_aead *authenc = crypto_aead_reqtfm(req); struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc); @@ -170,7 +171,6 @@ static int crypto_authenc_verify(struct aead_request *req) u8 *ohash = aead_request_ctx(req); u8 *ihash; struct scatterlist *src = req->src; - unsigned int cryptlen = req->cryptlen; unsigned int authsize; int err; @@ -214,16 +214,22 @@ static int crypto_authenc_decrypt(struct aead_request *req) struct crypto_aead *authenc = crypto_aead_reqtfm(req); struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc); struct ablkcipher_request *abreq = aead_request_ctx(req); + unsigned int cryptlen = req->cryptlen; + unsigned int authsize = crypto_aead_authsize(authenc); int err; - err = crypto_authenc_verify(req); + if (cryptlen < authsize) + return -EINVAL; + cryptlen -= authsize; + + err = crypto_authenc_verify(req, cryptlen); if (err) return err; ablkcipher_request_set_tfm(abreq, ctx->enc); ablkcipher_request_set_callback(abreq, aead_request_flags(req), crypto_authenc_decrypt_done, req); - ablkcipher_request_set_crypt(abreq, req->src, req->dst, req->cryptlen, + ablkcipher_request_set_crypt(abreq, req->src, req->dst, cryptlen, req->iv); return crypto_ablkcipher_decrypt(abreq); -- cgit v1.2.3-59-g8ed1b From 8df213d9b520a4b58b7a8f7f2200324d4e40363d Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 2 Dec 2007 14:55:47 +1100 Subject: [CRYPTO] tcrypt: Make gcm available as a standalone test Currently the gcm(aes) tests have to be taken together with all other ciphers. This patch makes it available by itself at number 35. Signed-off-by: Herbert Xu --- crypto/tcrypt.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c index 387d1053f11a..df93595c2c68 100644 --- a/crypto/tcrypt.c +++ b/crypto/tcrypt.c @@ -1548,6 +1548,13 @@ static void do_test(void) SALSA20_STREAM_ENC_TEST_VECTORS); break; + case 35: + test_aead("gcm(aes)", ENCRYPT, aes_gcm_enc_tv_template, + AES_GCM_ENC_TEST_VECTORS); + test_aead("gcm(aes)", DECRYPT, aes_gcm_dec_tv_template, + AES_GCM_DEC_TEST_VECTORS); + break; + case 100: test_hash("hmac(md5)", hmac_md5_tv_template, HMAC_MD5_TEST_VECTORS); -- cgit v1.2.3-59-g8ed1b From 6160b289929c0b622e64aa36106d8e6e53fcd826 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 4 Dec 2007 19:17:50 +1100 Subject: [CRYPTO] gcm: Fix ICV handling The crypto_aead convention for ICVs is to include it directly in the output. If we decided to change this in future then we would make the ICV (if the algorithm has an explicit one) available in the request itself. For now no algorithm needs this so this patch changes gcm to conform to this convention. It also adjusts the tcrypt aead tests to take this into account. Signed-off-by: Herbert Xu --- crypto/gcm.c | 68 +++++++++++++++++------------ crypto/tcrypt.c | 44 +++++++------------ crypto/tcrypt.h | 130 +++++++++++++++++++++++++------------------------------- 3 files changed, 113 insertions(+), 129 deletions(-) diff --git a/crypto/gcm.c b/crypto/gcm.c index 5681c7957b88..ed8a6261b346 100644 --- a/crypto/gcm.c +++ b/crypto/gcm.c @@ -36,6 +36,7 @@ struct crypto_gcm_ghash_ctx { struct crypto_gcm_req_priv_ctx { u8 auth_tag[16]; + u8 iauth_tag[16]; u8 counter[16]; struct crypto_gcm_ghash_ctx ghash; }; @@ -89,6 +90,9 @@ static void crypto_gcm_ghash_update_sg(struct crypto_gcm_ghash_ctx *ctx, u8 *src; int n; + if (!len) + return; + scatterwalk_start(&walk, sg); while (len) { @@ -211,9 +215,10 @@ static int crypto_gcm_setkey(struct crypto_aead *aead, const u8 *key, } static int crypto_gcm_init_crypt(struct ablkcipher_request *ablk_req, - struct aead_request *req, - void (*done)(struct crypto_async_request *, - int)) + struct aead_request *req, + unsigned int cryptlen, + void (*done)(struct crypto_async_request *, + int)) { struct crypto_aead *aead = crypto_aead_reqtfm(req); struct crypto_gcm_ctx *ctx = crypto_aead_ctx(aead); @@ -228,7 +233,7 @@ static int crypto_gcm_init_crypt(struct ablkcipher_request *ablk_req, ablkcipher_request_set_callback(ablk_req, aead_request_flags(req), done, req); ablkcipher_request_set_crypt(ablk_req, req->src, req->dst, - req->cryptlen, counter); + cryptlen, counter); err = crypto_gcm_encrypt_counter(aead, auth_tag, 0, req->iv); if (err) @@ -239,18 +244,16 @@ static int crypto_gcm_init_crypt(struct ablkcipher_request *ablk_req, crypto_gcm_ghash_init(ghash, flags, ctx->gf128); - if (req->assoclen) { - crypto_gcm_ghash_update_sg(ghash, req->assoc, req->assoclen); - crypto_gcm_ghash_flush(ghash); - } + crypto_gcm_ghash_update_sg(ghash, req->assoc, req->assoclen); + crypto_gcm_ghash_flush(ghash); out: return err; } -static void crypto_gcm_encrypt_done(struct crypto_async_request *areq, int err) +static int crypto_gcm_hash(struct aead_request *req) { - struct aead_request *req = areq->data; + struct crypto_aead *aead = crypto_aead_reqtfm(req); struct crypto_gcm_req_priv_ctx *pctx = aead_request_ctx(req); u8 *auth_tag = pctx->auth_tag; struct crypto_gcm_ghash_ctx *ghash = &pctx->ghash; @@ -259,18 +262,28 @@ static void crypto_gcm_encrypt_done(struct crypto_async_request *areq, int err) crypto_gcm_ghash_final_xor(ghash, req->assoclen, req->cryptlen, auth_tag); + scatterwalk_map_and_copy(auth_tag, req->dst, req->cryptlen, + crypto_aead_authsize(aead), 1); + return 0; +} + +static void crypto_gcm_encrypt_done(struct crypto_async_request *areq, int err) +{ + struct aead_request *req = areq->data; + + if (!err) + err = crypto_gcm_hash(req); + aead_request_complete(req, err); } static int crypto_gcm_encrypt(struct aead_request *req) { struct ablkcipher_request abreq; - struct crypto_gcm_req_priv_ctx *pctx = aead_request_ctx(req); - u8 *auth_tag = pctx->auth_tag; - struct crypto_gcm_ghash_ctx *ghash = &pctx->ghash; int err = 0; - err = crypto_gcm_init_crypt(&abreq, req, crypto_gcm_encrypt_done); + err = crypto_gcm_init_crypt(&abreq, req, req->cryptlen, + crypto_gcm_encrypt_done); if (err) return err; @@ -278,14 +291,9 @@ static int crypto_gcm_encrypt(struct aead_request *req) err = crypto_ablkcipher_encrypt(&abreq); if (err) return err; - - crypto_gcm_ghash_update_sg(ghash, req->dst, req->cryptlen); } - crypto_gcm_ghash_final_xor(ghash, req->assoclen, req->cryptlen, - auth_tag); - - return err; + return crypto_gcm_hash(req); } static void crypto_gcm_decrypt_done(struct crypto_async_request *areq, int err) @@ -296,25 +304,29 @@ static void crypto_gcm_decrypt_done(struct crypto_async_request *areq, int err) static int crypto_gcm_decrypt(struct aead_request *req) { struct ablkcipher_request abreq; + struct crypto_aead *aead = crypto_aead_reqtfm(req); struct crypto_gcm_req_priv_ctx *pctx = aead_request_ctx(req); u8 *auth_tag = pctx->auth_tag; + u8 *iauth_tag = pctx->iauth_tag; struct crypto_gcm_ghash_ctx *ghash = &pctx->ghash; - u8 tag[16]; + unsigned int cryptlen = req->cryptlen; + unsigned int authsize = crypto_aead_authsize(aead); int err; - if (!req->cryptlen) + if (cryptlen < authsize) return -EINVAL; + cryptlen -= authsize; - memcpy(tag, auth_tag, 16); - err = crypto_gcm_init_crypt(&abreq, req, crypto_gcm_decrypt_done); + err = crypto_gcm_init_crypt(&abreq, req, cryptlen, + crypto_gcm_decrypt_done); if (err) return err; - crypto_gcm_ghash_update_sg(ghash, req->src, req->cryptlen); - crypto_gcm_ghash_final_xor(ghash, req->assoclen, req->cryptlen, - auth_tag); + crypto_gcm_ghash_update_sg(ghash, req->src, cryptlen); + crypto_gcm_ghash_final_xor(ghash, req->assoclen, cryptlen, auth_tag); - if (memcmp(tag, auth_tag, 16)) + scatterwalk_map_and_copy(iauth_tag, req->src, cryptlen, authsize, 0); + if (memcmp(iauth_tag, auth_tag, authsize)) return -EINVAL; return crypto_ablkcipher_decrypt(&abreq); diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c index df93595c2c68..a6d4160c37f7 100644 --- a/crypto/tcrypt.c +++ b/crypto/tcrypt.c @@ -235,6 +235,7 @@ static void test_aead(char *algo, int enc, struct aead_testvec *template, struct scatterlist asg[8]; const char *e; struct tcrypt_result result; + unsigned int authsize; if (enc == ENCRYPT) e = "encryption"; @@ -265,6 +266,8 @@ static void test_aead(char *algo, int enc, struct aead_testvec *template, return; } + authsize = crypto_aead_authsize(tfm); + req = aead_request_alloc(tfm, GFP_KERNEL); if (!req) { printk(KERN_INFO "failed to allocate request for %s\n", algo); @@ -296,7 +299,7 @@ static void test_aead(char *algo, int enc, struct aead_testvec *template, } sg_init_one(&sg[0], aead_tv[i].input, - aead_tv[i].ilen); + aead_tv[i].ilen + (enc ? authsize : 0)); sg_init_one(&asg[0], aead_tv[i].assoc, aead_tv[i].alen); @@ -307,13 +310,9 @@ static void test_aead(char *algo, int enc, struct aead_testvec *template, aead_request_set_assoc(req, asg, aead_tv[i].alen); - if (enc) { - ret = crypto_aead_encrypt(req); - } else { - memcpy(req->__ctx, aead_tv[i].tag, - aead_tv[i].tlen); - ret = crypto_aead_decrypt(req); - } + ret = enc ? + crypto_aead_encrypt(req) : + crypto_aead_decrypt(req); switch (ret) { case 0: @@ -335,16 +334,10 @@ static void test_aead(char *algo, int enc, struct aead_testvec *template, q = kmap(sg_page(&sg[0])) + sg[0].offset; hexdump(q, aead_tv[i].rlen); - printk(KERN_INFO "auth tag: "); - hexdump((unsigned char *)req->__ctx, aead_tv[i].tlen); printk(KERN_INFO "enc/dec: %s\n", memcmp(q, aead_tv[i].result, aead_tv[i].rlen) ? "fail" : "pass"); - - printk(KERN_INFO "auth tag: %s\n", - memcmp(req->__ctx, aead_tv[i].tag, - aead_tv[i].tlen) ? "fail" : "pass"); } } @@ -381,6 +374,9 @@ static void test_aead(char *algo, int enc, struct aead_testvec *template, aead_tv[i].tap[k]); } + if (enc) + sg[k - 1].length += authsize; + sg_init_table(asg, aead_tv[i].anp); for (k = 0, temp = 0; k < aead_tv[i].anp; k++) { memcpy(&axbuf[IDX[k]], @@ -397,13 +393,9 @@ static void test_aead(char *algo, int enc, struct aead_testvec *template, aead_request_set_assoc(req, asg, aead_tv[i].alen); - if (enc) { - ret = crypto_aead_encrypt(req); - } else { - memcpy(req->__ctx, aead_tv[i].tag, - aead_tv[i].tlen); - ret = crypto_aead_decrypt(req); - } + ret = enc ? + crypto_aead_encrypt(req) : + crypto_aead_decrypt(req); switch (ret) { case 0: @@ -429,17 +421,13 @@ static void test_aead(char *algo, int enc, struct aead_testvec *template, hexdump(q, aead_tv[i].tap[k]); printk(KERN_INFO "%s\n", memcmp(q, aead_tv[i].result + temp, - aead_tv[i].tap[k]) ? + aead_tv[i].tap[k] - + (k < aead_tv[i].np - 1 || enc ? + 0 : authsize)) ? "fail" : "pass"); temp += aead_tv[i].tap[k]; } - printk(KERN_INFO "auth tag: "); - hexdump((unsigned char *)req->__ctx, aead_tv[i].tlen); - - printk(KERN_INFO "auth tag: %s\n", - memcmp(req->__ctx, aead_tv[i].tag, - aead_tv[i].tlen) ? "fail" : "pass"); } } diff --git a/crypto/tcrypt.h b/crypto/tcrypt.h index 05aba22ce6db..439e290f3bce 100644 --- a/crypto/tcrypt.h +++ b/crypto/tcrypt.h @@ -60,7 +60,6 @@ struct aead_testvec { char input[512]; char assoc[512]; char result[512]; - char tag[128]; unsigned char tap[MAX_TAP]; unsigned char atap[MAX_TAP]; int np; @@ -71,7 +70,6 @@ struct aead_testvec { unsigned short ilen; unsigned short alen; unsigned short rlen; - unsigned short tlen; }; struct cipher_speed { @@ -4682,18 +4680,17 @@ static struct cipher_testvec aes_ctr_dec_tv_template[] = { static struct aead_testvec aes_gcm_enc_tv_template[] = { { /* From McGrew & Viega - http://citeseer.ist.psu.edu/656989.html */ .klen = 16, - .tag = { 0x58, 0xe2, 0xfc, 0xce, 0xfa, 0x7e, 0x30, 0x61, + .result = { 0x58, 0xe2, 0xfc, 0xce, 0xfa, 0x7e, 0x30, 0x61, 0x36, 0x7f, 0x1d, 0x57, 0xa4, 0xe7, 0x45, 0x5a }, - .tlen = 16 + .rlen = 16, }, { .klen = 16, .ilen = 16, .result = { 0x03, 0x88, 0xda, 0xce, 0x60, 0xb6, 0xa3, 0x92, - 0xf3, 0x28, 0xc2, 0xb9, 0x71, 0xb2, 0xfe, 0x78 }, - .rlen = 16, - .tag = { 0xab, 0x6e, 0x47, 0xd4, 0x2c, 0xec, 0x13, 0xbd, + 0xf3, 0x28, 0xc2, 0xb9, 0x71, 0xb2, 0xfe, 0x78, + 0xab, 0x6e, 0x47, 0xd4, 0x2c, 0xec, 0x13, 0xbd, 0xf5, 0x3a, 0x67, 0xb2, 0x12, 0x57, 0xbd, 0xdf }, - .tlen = 16 + .rlen = 32, }, { .key = { 0xfe, 0xff, 0xe9, 0x92, 0x86, 0x65, 0x73, 0x1c, 0x6d, 0x6a, 0x8f, 0x94, 0x67, 0x30, 0x83, 0x08 }, @@ -4716,11 +4713,10 @@ static struct aead_testvec aes_gcm_enc_tv_template[] = { 0x21, 0xd5, 0x14, 0xb2, 0x54, 0x66, 0x93, 0x1c, 0x7d, 0x8f, 0x6a, 0x5a, 0xac, 0x84, 0xaa, 0x05, 0x1b, 0xa3, 0x0b, 0x39, 0x6a, 0x0a, 0xac, 0x97, - 0x3d, 0x58, 0xe0, 0x91, 0x47, 0x3f, 0x59, 0x85 }, - .rlen = 64, - .tag = { 0x4d, 0x5c, 0x2a, 0xf3, 0x27, 0xcd, 0x64, 0xa6, + 0x3d, 0x58, 0xe0, 0x91, 0x47, 0x3f, 0x59, 0x85, + 0x4d, 0x5c, 0x2a, 0xf3, 0x27, 0xcd, 0x64, 0xa6, 0x2c, 0xf3, 0x5a, 0xbd, 0x2b, 0xa6, 0xfa, 0xb4 }, - .tlen = 16 + .rlen = 80, }, { .key = { 0xfe, 0xff, 0xe9, 0x92, 0x86, 0x65, 0x73, 0x1c, 0x6d, 0x6a, 0x8f, 0x94, 0x67, 0x30, 0x83, 0x08 }, @@ -4747,25 +4743,23 @@ static struct aead_testvec aes_gcm_enc_tv_template[] = { 0x21, 0xd5, 0x14, 0xb2, 0x54, 0x66, 0x93, 0x1c, 0x7d, 0x8f, 0x6a, 0x5a, 0xac, 0x84, 0xaa, 0x05, 0x1b, 0xa3, 0x0b, 0x39, 0x6a, 0x0a, 0xac, 0x97, - 0x3d, 0x58, 0xe0, 0x91 }, - .rlen = 60, - .tag = { 0x5b, 0xc9, 0x4f, 0xbc, 0x32, 0x21, 0xa5, 0xdb, + 0x3d, 0x58, 0xe0, 0x91, + 0x5b, 0xc9, 0x4f, 0xbc, 0x32, 0x21, 0xa5, 0xdb, 0x94, 0xfa, 0xe9, 0x5a, 0xe7, 0x12, 0x1a, 0x47 }, - .tlen = 16 + .rlen = 76, }, { .klen = 24, - .tag = { 0xcd, 0x33, 0xb2, 0x8a, 0xc7, 0x73, 0xf7, 0x4b, + .result = { 0xcd, 0x33, 0xb2, 0x8a, 0xc7, 0x73, 0xf7, 0x4b, 0xa0, 0x0e, 0xd1, 0xf3, 0x12, 0x57, 0x24, 0x35 }, - .tlen = 16 + .rlen = 16, }, { .klen = 24, .ilen = 16, .result = { 0x98, 0xe7, 0x24, 0x7c, 0x07, 0xf0, 0xfe, 0x41, - 0x1c, 0x26, 0x7e, 0x43, 0x84, 0xb0, 0xf6, 0x00 }, - .rlen = 16, - .tag = { 0x2f, 0xf5, 0x8d, 0x80, 0x03, 0x39, 0x27, 0xab, + 0x1c, 0x26, 0x7e, 0x43, 0x84, 0xb0, 0xf6, 0x00, + 0x2f, 0xf5, 0x8d, 0x80, 0x03, 0x39, 0x27, 0xab, 0x8e, 0xf4, 0xd4, 0x58, 0x75, 0x14, 0xf0, 0xfb }, - .tlen = 16 + .rlen = 32, }, { .key = { 0xfe, 0xff, 0xe9, 0x92, 0x86, 0x65, 0x73, 0x1c, 0x6d, 0x6a, 0x8f, 0x94, 0x67, 0x30, 0x83, 0x08, @@ -4789,11 +4783,10 @@ static struct aead_testvec aes_gcm_enc_tv_template[] = { 0x7d, 0x77, 0x3d, 0x00, 0xc1, 0x44, 0xc5, 0x25, 0xac, 0x61, 0x9d, 0x18, 0xc8, 0x4a, 0x3f, 0x47, 0x18, 0xe2, 0x44, 0x8b, 0x2f, 0xe3, 0x24, 0xd9, - 0xcc, 0xda, 0x27, 0x10, 0xac, 0xad, 0xe2, 0x56 }, - .rlen = 64, - .tag = { 0x99, 0x24, 0xa7, 0xc8, 0x58, 0x73, 0x36, 0xbf, + 0xcc, 0xda, 0x27, 0x10, 0xac, 0xad, 0xe2, 0x56, + 0x99, 0x24, 0xa7, 0xc8, 0x58, 0x73, 0x36, 0xbf, 0xb1, 0x18, 0x02, 0x4d, 0xb8, 0x67, 0x4a, 0x14 }, - .tlen = 16 + .rlen = 80, }, { .key = { 0xfe, 0xff, 0xe9, 0x92, 0x86, 0x65, 0x73, 0x1c, 0x6d, 0x6a, 0x8f, 0x94, 0x67, 0x30, 0x83, 0x08, @@ -4821,20 +4814,19 @@ static struct aead_testvec aes_gcm_enc_tv_template[] = { 0x7d, 0x77, 0x3d, 0x00, 0xc1, 0x44, 0xc5, 0x25, 0xac, 0x61, 0x9d, 0x18, 0xc8, 0x4a, 0x3f, 0x47, 0x18, 0xe2, 0x44, 0x8b, 0x2f, 0xe3, 0x24, 0xd9, - 0xcc, 0xda, 0x27, 0x10 }, - .rlen = 60, - .tag = { 0x25, 0x19, 0x49, 0x8e, 0x80, 0xf1, 0x47, 0x8f, + 0xcc, 0xda, 0x27, 0x10, + 0x25, 0x19, 0x49, 0x8e, 0x80, 0xf1, 0x47, 0x8f, 0x37, 0xba, 0x55, 0xbd, 0x6d, 0x27, 0x61, 0x8c }, - .tlen = 16, + .rlen = 76, .np = 2, .tap = { 32, 28 }, .anp = 2, .atap = { 8, 12 } }, { .klen = 32, - .tag = { 0x53, 0x0f, 0x8a, 0xfb, 0xc7, 0x45, 0x36, 0xb9, + .result = { 0x53, 0x0f, 0x8a, 0xfb, 0xc7, 0x45, 0x36, 0xb9, 0xa9, 0x63, 0xb4, 0xf1, 0xc4, 0xcb, 0x73, 0x8b }, - .tlen = 16 + .rlen = 16, } }; @@ -4842,12 +4834,11 @@ static struct aead_testvec aes_gcm_dec_tv_template[] = { { /* From McGrew & Viega - http://citeseer.ist.psu.edu/656989.html */ .klen = 32, .input = { 0xce, 0xa7, 0x40, 0x3d, 0x4d, 0x60, 0x6b, 0x6e, - 0x07, 0x4e, 0xc5, 0xd3, 0xba, 0xf3, 0x9d, 0x18 }, - .ilen = 16, - .rlen = 16, - .tag = { 0xd0, 0xd1, 0xc8, 0xa7, 0x99, 0x99, 0x6b, 0xf0, + 0x07, 0x4e, 0xc5, 0xd3, 0xba, 0xf3, 0x9d, 0x18, + 0xd0, 0xd1, 0xc8, 0xa7, 0x99, 0x99, 0x6b, 0xf0, 0x26, 0x5b, 0x98, 0xb5, 0xd4, 0x8a, 0xb9, 0x19 }, - .tlen = 16 + .ilen = 32, + .rlen = 16, }, { .key = { 0xfe, 0xff, 0xe9, 0x92, 0x86, 0x65, 0x73, 0x1c, 0x6d, 0x6a, 0x8f, 0x94, 0x67, 0x30, 0x83, 0x08, @@ -4863,8 +4854,10 @@ static struct aead_testvec aes_gcm_dec_tv_template[] = { 0x8c, 0xb0, 0x8e, 0x48, 0x59, 0x0d, 0xbb, 0x3d, 0xa7, 0xb0, 0x8b, 0x10, 0x56, 0x82, 0x88, 0x38, 0xc5, 0xf6, 0x1e, 0x63, 0x93, 0xba, 0x7a, 0x0a, - 0xbc, 0xc9, 0xf6, 0x62, 0x89, 0x80, 0x15, 0xad }, - .ilen = 64, + 0xbc, 0xc9, 0xf6, 0x62, 0x89, 0x80, 0x15, 0xad, + 0xb0, 0x94, 0xda, 0xc5, 0xd9, 0x34, 0x71, 0xbd, + 0xec, 0x1a, 0x50, 0x22, 0x70, 0xe3, 0xcc, 0x6c }, + .ilen = 80, .result = { 0xd9, 0x31, 0x32, 0x25, 0xf8, 0x84, 0x06, 0xe5, 0xa5, 0x59, 0x09, 0xc5, 0xaf, 0xf5, 0x26, 0x9a, 0x86, 0xa7, 0xa9, 0x53, 0x15, 0x34, 0xf7, 0xda, @@ -4874,9 +4867,6 @@ static struct aead_testvec aes_gcm_dec_tv_template[] = { 0xb1, 0x6a, 0xed, 0xf5, 0xaa, 0x0d, 0xe6, 0x57, 0xba, 0x63, 0x7b, 0x39, 0x1a, 0xaf, 0xd2, 0x55 }, .rlen = 64, - .tag = { 0xb0, 0x94, 0xda, 0xc5, 0xd9, 0x34, 0x71, 0xbd, - 0xec, 0x1a, 0x50, 0x22, 0x70, 0xe3, 0xcc, 0x6c }, - .tlen = 16 }, { .key = { 0xfe, 0xff, 0xe9, 0x92, 0x86, 0x65, 0x73, 0x1c, 0x6d, 0x6a, 0x8f, 0x94, 0x67, 0x30, 0x83, 0x08, @@ -4892,8 +4882,10 @@ static struct aead_testvec aes_gcm_dec_tv_template[] = { 0x8c, 0xb0, 0x8e, 0x48, 0x59, 0x0d, 0xbb, 0x3d, 0xa7, 0xb0, 0x8b, 0x10, 0x56, 0x82, 0x88, 0x38, 0xc5, 0xf6, 0x1e, 0x63, 0x93, 0xba, 0x7a, 0x0a, - 0xbc, 0xc9, 0xf6, 0x62 }, - .ilen = 60, + 0xbc, 0xc9, 0xf6, 0x62, + 0x76, 0xfc, 0x6e, 0xce, 0x0f, 0x4e, 0x17, 0x68, + 0xcd, 0xdf, 0x88, 0x53, 0xbb, 0x2d, 0x55, 0x1b }, + .ilen = 76, .assoc = { 0xfe, 0xed, 0xfa, 0xce, 0xde, 0xad, 0xbe, 0xef, 0xfe, 0xed, 0xfa, 0xce, 0xde, 0xad, 0xbe, 0xef, 0xab, 0xad, 0xda, 0xd2 }, @@ -4907,11 +4899,8 @@ static struct aead_testvec aes_gcm_dec_tv_template[] = { 0xb1, 0x6a, 0xed, 0xf5, 0xaa, 0x0d, 0xe6, 0x57, 0xba, 0x63, 0x7b, 0x39 }, .rlen = 60, - .tag = { 0x76, 0xfc, 0x6e, 0xce, 0x0f, 0x4e, 0x17, 0x68, - 0xcd, 0xdf, 0x88, 0x53, 0xbb, 0x2d, 0x55, 0x1b }, - .tlen = 16, .np = 2, - .tap = { 48, 12 }, + .tap = { 48, 28 }, .anp = 3, .atap = { 8, 8, 4 } }, { @@ -4927,8 +4916,10 @@ static struct aead_testvec aes_gcm_dec_tv_template[] = { 0x21, 0xd5, 0x14, 0xb2, 0x54, 0x66, 0x93, 0x1c, 0x7d, 0x8f, 0x6a, 0x5a, 0xac, 0x84, 0xaa, 0x05, 0x1b, 0xa3, 0x0b, 0x39, 0x6a, 0x0a, 0xac, 0x97, - 0x3d, 0x58, 0xe0, 0x91, 0x47, 0x3f, 0x59, 0x85 }, - .ilen = 64, + 0x3d, 0x58, 0xe0, 0x91, 0x47, 0x3f, 0x59, 0x85, + 0x4d, 0x5c, 0x2a, 0xf3, 0x27, 0xcd, 0x64, 0xa6, + 0x2c, 0xf3, 0x5a, 0xbd, 0x2b, 0xa6, 0xfa, 0xb4 }, + .ilen = 80, .result = { 0xd9, 0x31, 0x32, 0x25, 0xf8, 0x84, 0x06, 0xe5, 0xa5, 0x59, 0x09, 0xc5, 0xaf, 0xf5, 0x26, 0x9a, 0x86, 0xa7, 0xa9, 0x53, 0x15, 0x34, 0xf7, 0xda, @@ -4938,9 +4929,6 @@ static struct aead_testvec aes_gcm_dec_tv_template[] = { 0xb1, 0x6a, 0xed, 0xf5, 0xaa, 0x0d, 0xe6, 0x57, 0xba, 0x63, 0x7b, 0x39, 0x1a, 0xaf, 0xd2, 0x55 }, .rlen = 64, - .tag = { 0x4d, 0x5c, 0x2a, 0xf3, 0x27, 0xcd, 0x64, 0xa6, - 0x2c, 0xf3, 0x5a, 0xbd, 0x2b, 0xa6, 0xfa, 0xb4 }, - .tlen = 16 }, { .key = { 0xfe, 0xff, 0xe9, 0x92, 0x86, 0x65, 0x73, 0x1c, 0x6d, 0x6a, 0x8f, 0x94, 0x67, 0x30, 0x83, 0x08 }, @@ -4954,8 +4942,10 @@ static struct aead_testvec aes_gcm_dec_tv_template[] = { 0x21, 0xd5, 0x14, 0xb2, 0x54, 0x66, 0x93, 0x1c, 0x7d, 0x8f, 0x6a, 0x5a, 0xac, 0x84, 0xaa, 0x05, 0x1b, 0xa3, 0x0b, 0x39, 0x6a, 0x0a, 0xac, 0x97, - 0x3d, 0x58, 0xe0, 0x91 }, - .ilen = 60, + 0x3d, 0x58, 0xe0, 0x91, + 0x5b, 0xc9, 0x4f, 0xbc, 0x32, 0x21, 0xa5, 0xdb, + 0x94, 0xfa, 0xe9, 0x5a, 0xe7, 0x12, 0x1a, 0x47 }, + .ilen = 76, .assoc = { 0xfe, 0xed, 0xfa, 0xce, 0xde, 0xad, 0xbe, 0xef, 0xfe, 0xed, 0xfa, 0xce, 0xde, 0xad, 0xbe, 0xef, 0xab, 0xad, 0xda, 0xd2 }, @@ -4969,18 +4959,14 @@ static struct aead_testvec aes_gcm_dec_tv_template[] = { 0xb1, 0x6a, 0xed, 0xf5, 0xaa, 0x0d, 0xe6, 0x57, 0xba, 0x63, 0x7b, 0x39 }, .rlen = 60, - .tag = { 0x5b, 0xc9, 0x4f, 0xbc, 0x32, 0x21, 0xa5, 0xdb, - 0x94, 0xfa, 0xe9, 0x5a, 0xe7, 0x12, 0x1a, 0x47 }, - .tlen = 16 }, { .klen = 24, .input = { 0x98, 0xe7, 0x24, 0x7c, 0x07, 0xf0, 0xfe, 0x41, - 0x1c, 0x26, 0x7e, 0x43, 0x84, 0xb0, 0xf6, 0x00 }, - .ilen = 16, - .rlen = 16, - .tag = { 0x2f, 0xf5, 0x8d, 0x80, 0x03, 0x39, 0x27, 0xab, + 0x1c, 0x26, 0x7e, 0x43, 0x84, 0xb0, 0xf6, 0x00, + 0x2f, 0xf5, 0x8d, 0x80, 0x03, 0x39, 0x27, 0xab, 0x8e, 0xf4, 0xd4, 0x58, 0x75, 0x14, 0xf0, 0xfb }, - .tlen = 16 + .ilen = 32, + .rlen = 16, }, { .key = { 0xfe, 0xff, 0xe9, 0x92, 0x86, 0x65, 0x73, 0x1c, 0x6d, 0x6a, 0x8f, 0x94, 0x67, 0x30, 0x83, 0x08, @@ -4995,8 +4981,10 @@ static struct aead_testvec aes_gcm_dec_tv_template[] = { 0x7d, 0x77, 0x3d, 0x00, 0xc1, 0x44, 0xc5, 0x25, 0xac, 0x61, 0x9d, 0x18, 0xc8, 0x4a, 0x3f, 0x47, 0x18, 0xe2, 0x44, 0x8b, 0x2f, 0xe3, 0x24, 0xd9, - 0xcc, 0xda, 0x27, 0x10, 0xac, 0xad, 0xe2, 0x56 }, - .ilen = 64, + 0xcc, 0xda, 0x27, 0x10, 0xac, 0xad, 0xe2, 0x56, + 0x99, 0x24, 0xa7, 0xc8, 0x58, 0x73, 0x36, 0xbf, + 0xb1, 0x18, 0x02, 0x4d, 0xb8, 0x67, 0x4a, 0x14 }, + .ilen = 80, .result = { 0xd9, 0x31, 0x32, 0x25, 0xf8, 0x84, 0x06, 0xe5, 0xa5, 0x59, 0x09, 0xc5, 0xaf, 0xf5, 0x26, 0x9a, 0x86, 0xa7, 0xa9, 0x53, 0x15, 0x34, 0xf7, 0xda, @@ -5006,9 +4994,6 @@ static struct aead_testvec aes_gcm_dec_tv_template[] = { 0xb1, 0x6a, 0xed, 0xf5, 0xaa, 0x0d, 0xe6, 0x57, 0xba, 0x63, 0x7b, 0x39, 0x1a, 0xaf, 0xd2, 0x55 }, .rlen = 64, - .tag = { 0x99, 0x24, 0xa7, 0xc8, 0x58, 0x73, 0x36, 0xbf, - 0xb1, 0x18, 0x02, 0x4d, 0xb8, 0x67, 0x4a, 0x14 }, - .tlen = 16 }, { .key = { 0xfe, 0xff, 0xe9, 0x92, 0x86, 0x65, 0x73, 0x1c, 0x6d, 0x6a, 0x8f, 0x94, 0x67, 0x30, 0x83, 0x08, @@ -5023,8 +5008,10 @@ static struct aead_testvec aes_gcm_dec_tv_template[] = { 0x7d, 0x77, 0x3d, 0x00, 0xc1, 0x44, 0xc5, 0x25, 0xac, 0x61, 0x9d, 0x18, 0xc8, 0x4a, 0x3f, 0x47, 0x18, 0xe2, 0x44, 0x8b, 0x2f, 0xe3, 0x24, 0xd9, - 0xcc, 0xda, 0x27, 0x10 }, - .ilen = 60, + 0xcc, 0xda, 0x27, 0x10, + 0x25, 0x19, 0x49, 0x8e, 0x80, 0xf1, 0x47, 0x8f, + 0x37, 0xba, 0x55, 0xbd, 0x6d, 0x27, 0x61, 0x8c }, + .ilen = 76, .assoc = { 0xfe, 0xed, 0xfa, 0xce, 0xde, 0xad, 0xbe, 0xef, 0xfe, 0xed, 0xfa, 0xce, 0xde, 0xad, 0xbe, 0xef, 0xab, 0xad, 0xda, 0xd2 }, @@ -5038,9 +5025,6 @@ static struct aead_testvec aes_gcm_dec_tv_template[] = { 0xb1, 0x6a, 0xed, 0xf5, 0xaa, 0x0d, 0xe6, 0x57, 0xba, 0x63, 0x7b, 0x39 }, .rlen = 60, - .tag = { 0x25, 0x19, 0x49, 0x8e, 0x80, 0xf1, 0x47, 0x8f, - 0x37, 0xba, 0x55, 0xbd, 0x6d, 0x27, 0x61, 0x8c }, - .tlen = 16 } }; -- cgit v1.2.3-59-g8ed1b From fe70f5dfe1a7b5caab96531089dac3d8728c0ebd Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 4 Dec 2007 20:07:27 +1100 Subject: [CRYPTO] aead: Return EBADMSG for ICV mismatch This patch changes gcm/authenc to return EBADMSG instead of EINVAL for ICV mismatches. This convention has already been adopted by IPsec. Signed-off-by: Herbert Xu --- crypto/authenc.c | 2 +- crypto/gcm.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/crypto/authenc.c b/crypto/authenc.c index 82e03ffa6245..6c9104ebf2f4 100644 --- a/crypto/authenc.c +++ b/crypto/authenc.c @@ -200,7 +200,7 @@ auth_unlock: authsize = crypto_aead_authsize(authenc); scatterwalk_map_and_copy(ihash, src, cryptlen, authsize, 0); - return memcmp(ihash, ohash, authsize) ? -EINVAL : 0; + return memcmp(ihash, ohash, authsize) ? -EBADMSG: 0; } static void crypto_authenc_decrypt_done(struct crypto_async_request *req, diff --git a/crypto/gcm.c b/crypto/gcm.c index ed8a6261b346..d60c340b0b9d 100644 --- a/crypto/gcm.c +++ b/crypto/gcm.c @@ -327,7 +327,7 @@ static int crypto_gcm_decrypt(struct aead_request *req) scatterwalk_map_and_copy(iauth_tag, req->src, cryptlen, authsize, 0); if (memcmp(iauth_tag, auth_tag, authsize)) - return -EINVAL; + return -EBADMSG; return crypto_ablkcipher_decrypt(&abreq); } -- cgit v1.2.3-59-g8ed1b From 42c271c6c538857cb13c5ead5184d264d745f675 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 7 Dec 2007 18:52:49 +0800 Subject: [CRYPTO] scatterwalk: Move scatterwalk.h to linux/crypto The scatterwalk infrastructure is used by algorithms so it needs to move out of crypto for future users that may live in drivers/crypto or asm/*/crypto. Signed-off-by: Herbert Xu --- crypto/authenc.c | 3 +- crypto/blkcipher.c | 2 +- crypto/digest.c | 3 +- crypto/gcm.c | 3 +- crypto/internal.h | 29 ------------ crypto/scatterwalk.c | 5 +- crypto/scatterwalk.h | 75 ------------------------------ crypto/xcbc.c | 2 +- include/crypto/scatterwalk.h | 107 +++++++++++++++++++++++++++++++++++++++++++ 9 files changed, 115 insertions(+), 114 deletions(-) delete mode 100644 crypto/scatterwalk.h create mode 100644 include/crypto/scatterwalk.h diff --git a/crypto/authenc.c b/crypto/authenc.c index 6c9104ebf2f4..fbbc2b505a21 100644 --- a/crypto/authenc.c +++ b/crypto/authenc.c @@ -12,6 +12,7 @@ #include #include +#include #include #include #include @@ -20,8 +21,6 @@ #include #include -#include "scatterwalk.h" - struct authenc_instance_ctx { struct crypto_spawn auth; struct crypto_spawn enc; diff --git a/crypto/blkcipher.c b/crypto/blkcipher.c index 180d91451476..7939504dfd8b 100644 --- a/crypto/blkcipher.c +++ b/crypto/blkcipher.c @@ -14,6 +14,7 @@ * */ +#include #include #include #include @@ -25,7 +26,6 @@ #include #include "internal.h" -#include "scatterwalk.h" enum { BLKCIPHER_WALK_PHYS = 1 << 0, diff --git a/crypto/digest.c b/crypto/digest.c index d3e827a141f1..52845f53f8e1 100644 --- a/crypto/digest.c +++ b/crypto/digest.c @@ -12,6 +12,7 @@ * */ +#include #include #include #include @@ -20,8 +21,6 @@ #include #include -#include "internal.h" - static int init(struct hash_desc *desc) { struct crypto_tfm *tfm = crypto_hash_tfm(desc->tfm); diff --git a/crypto/gcm.c b/crypto/gcm.c index d60c340b0b9d..27483f361e80 100644 --- a/crypto/gcm.c +++ b/crypto/gcm.c @@ -10,13 +10,14 @@ #include #include +#include #include #include #include #include #include -#include "scatterwalk.h" +#include "internal.h" struct gcm_instance_ctx { struct crypto_spawn ctr; diff --git a/crypto/internal.h b/crypto/internal.h index abb01f71f817..cb13952f82bf 100644 --- a/crypto/internal.h +++ b/crypto/internal.h @@ -25,7 +25,6 @@ #include #include #include -#include /* Crypto notification events. */ enum { @@ -50,34 +49,6 @@ extern struct list_head crypto_alg_list; extern struct rw_semaphore crypto_alg_sem; extern struct blocking_notifier_head crypto_chain; -static inline enum km_type crypto_kmap_type(int out) -{ - enum km_type type; - - if (in_softirq()) - type = out * (KM_SOFTIRQ1 - KM_SOFTIRQ0) + KM_SOFTIRQ0; - else - type = out * (KM_USER1 - KM_USER0) + KM_USER0; - - return type; -} - -static inline void *crypto_kmap(struct page *page, int out) -{ - return kmap_atomic(page, crypto_kmap_type(out)); -} - -static inline void crypto_kunmap(void *vaddr, int out) -{ - kunmap_atomic(vaddr, crypto_kmap_type(out)); -} - -static inline void crypto_yield(u32 flags) -{ - if (flags & CRYPTO_TFM_REQ_MAY_SLEEP) - cond_resched(); -} - #ifdef CONFIG_PROC_FS void __init crypto_init_proc(void); void __exit crypto_exit_proc(void); diff --git a/crypto/scatterwalk.c b/crypto/scatterwalk.c index 206c39a97e57..12d19019e178 100644 --- a/crypto/scatterwalk.c +++ b/crypto/scatterwalk.c @@ -13,6 +13,8 @@ * any later version. * */ + +#include #include #include #include @@ -20,9 +22,6 @@ #include #include -#include "internal.h" -#include "scatterwalk.h" - static inline void memcpy_dir(void *buf, void *sgdata, size_t nbytes, int out) { void *src = out ? buf : sgdata; diff --git a/crypto/scatterwalk.h b/crypto/scatterwalk.h deleted file mode 100644 index fd5517d2a7a9..000000000000 --- a/crypto/scatterwalk.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * Cryptographic API. - * - * Copyright (c) 2002 James Morris - * Copyright (c) 2002 Adam J. Richter - * Copyright (c) 2004 Jean-Luc Cooke - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - * - */ - -#ifndef _CRYPTO_SCATTERWALK_H -#define _CRYPTO_SCATTERWALK_H - -#include -#include - -#include "internal.h" - -static inline unsigned long scatterwalk_samebuf(struct scatter_walk *walk_in, - struct scatter_walk *walk_out) -{ - return !(((sg_page(walk_in->sg) - sg_page(walk_out->sg)) << PAGE_SHIFT) + - (int)(walk_in->offset - walk_out->offset)); -} - -static inline unsigned int scatterwalk_pagelen(struct scatter_walk *walk) -{ - unsigned int len = walk->sg->offset + walk->sg->length - walk->offset; - unsigned int len_this_page = offset_in_page(~walk->offset) + 1; - return len_this_page > len ? len : len_this_page; -} - -static inline unsigned int scatterwalk_clamp(struct scatter_walk *walk, - unsigned int nbytes) -{ - unsigned int len_this_page = scatterwalk_pagelen(walk); - return nbytes > len_this_page ? len_this_page : nbytes; -} - -static inline void scatterwalk_advance(struct scatter_walk *walk, - unsigned int nbytes) -{ - walk->offset += nbytes; -} - -static inline unsigned int scatterwalk_aligned(struct scatter_walk *walk, - unsigned int alignmask) -{ - return !(walk->offset & alignmask); -} - -static inline struct page *scatterwalk_page(struct scatter_walk *walk) -{ - return sg_page(walk->sg) + (walk->offset >> PAGE_SHIFT); -} - -static inline void scatterwalk_unmap(void *vaddr, int out) -{ - crypto_kunmap(vaddr, out); -} - -void scatterwalk_start(struct scatter_walk *walk, struct scatterlist *sg); -void scatterwalk_copychunks(void *buf, struct scatter_walk *walk, - size_t nbytes, int out); -void *scatterwalk_map(struct scatter_walk *walk, int out); -void scatterwalk_done(struct scatter_walk *walk, int out, int more); - -void scatterwalk_map_and_copy(void *buf, struct scatterlist *sg, - unsigned int start, unsigned int nbytes, int out); - -#endif /* _CRYPTO_SCATTERWALK_H */ diff --git a/crypto/xcbc.c b/crypto/xcbc.c index ac68f3b62fde..789cdeee6b7d 100644 --- a/crypto/xcbc.c +++ b/crypto/xcbc.c @@ -19,6 +19,7 @@ * Kazunori Miyazawa */ +#include #include #include #include @@ -27,7 +28,6 @@ #include #include #include -#include "internal.h" static u_int32_t ks[12] = {0x01010101, 0x01010101, 0x01010101, 0x01010101, 0x02020202, 0x02020202, 0x02020202, 0x02020202, diff --git a/include/crypto/scatterwalk.h b/include/crypto/scatterwalk.h new file mode 100644 index 000000000000..07b6f17122d2 --- /dev/null +++ b/include/crypto/scatterwalk.h @@ -0,0 +1,107 @@ +/* + * Cryptographic scatter and gather helpers. + * + * Copyright (c) 2002 James Morris + * Copyright (c) 2002 Adam J. Richter + * Copyright (c) 2004 Jean-Luc Cooke + * Copyright (c) 2007 Herbert Xu + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ + +#ifndef _CRYPTO_SCATTERWALK_H +#define _CRYPTO_SCATTERWALK_H + +#include +#include +#include +#include +#include +#include +#include + +static inline enum km_type crypto_kmap_type(int out) +{ + enum km_type type; + + if (in_softirq()) + type = out * (KM_SOFTIRQ1 - KM_SOFTIRQ0) + KM_SOFTIRQ0; + else + type = out * (KM_USER1 - KM_USER0) + KM_USER0; + + return type; +} + +static inline void *crypto_kmap(struct page *page, int out) +{ + return kmap_atomic(page, crypto_kmap_type(out)); +} + +static inline void crypto_kunmap(void *vaddr, int out) +{ + kunmap_atomic(vaddr, crypto_kmap_type(out)); +} + +static inline void crypto_yield(u32 flags) +{ + if (flags & CRYPTO_TFM_REQ_MAY_SLEEP) + cond_resched(); +} + +static inline unsigned long scatterwalk_samebuf(struct scatter_walk *walk_in, + struct scatter_walk *walk_out) +{ + return !(((sg_page(walk_in->sg) - sg_page(walk_out->sg)) << PAGE_SHIFT) + + (int)(walk_in->offset - walk_out->offset)); +} + +static inline unsigned int scatterwalk_pagelen(struct scatter_walk *walk) +{ + unsigned int len = walk->sg->offset + walk->sg->length - walk->offset; + unsigned int len_this_page = offset_in_page(~walk->offset) + 1; + return len_this_page > len ? len : len_this_page; +} + +static inline unsigned int scatterwalk_clamp(struct scatter_walk *walk, + unsigned int nbytes) +{ + unsigned int len_this_page = scatterwalk_pagelen(walk); + return nbytes > len_this_page ? len_this_page : nbytes; +} + +static inline void scatterwalk_advance(struct scatter_walk *walk, + unsigned int nbytes) +{ + walk->offset += nbytes; +} + +static inline unsigned int scatterwalk_aligned(struct scatter_walk *walk, + unsigned int alignmask) +{ + return !(walk->offset & alignmask); +} + +static inline struct page *scatterwalk_page(struct scatter_walk *walk) +{ + return sg_page(walk->sg) + (walk->offset >> PAGE_SHIFT); +} + +static inline void scatterwalk_unmap(void *vaddr, int out) +{ + crypto_kunmap(vaddr, out); +} + +void scatterwalk_start(struct scatter_walk *walk, struct scatterlist *sg); +void scatterwalk_copychunks(void *buf, struct scatter_walk *walk, + size_t nbytes, int out); +void *scatterwalk_map(struct scatter_walk *walk, int out); +void scatterwalk_done(struct scatter_walk *walk, int out, int more); + +void scatterwalk_map_and_copy(void *buf, struct scatterlist *sg, + unsigned int start, unsigned int nbytes, int out); + +#endif /* _CRYPTO_SCATTERWALK_H */ -- cgit v1.2.3-59-g8ed1b From b2ab4a57b018aafbba35bff088218f5cc3d2142e Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Wed, 5 Dec 2007 20:59:25 +1100 Subject: [CRYPTO] scatterwalk: Restore custom sg chaining for now Unfortunately the generic chaining hasn't been ported to all architectures yet, and notably not s390. So this patch restores the chainging that we've been using previously which does work everywhere. Signed-off-by: Herbert Xu --- crypto/digest.c | 2 +- crypto/gcm.c | 2 +- crypto/hmac.c | 3 ++- crypto/scatterwalk.c | 4 ++-- include/crypto/scatterwalk.h | 11 +++++++++++ 5 files changed, 17 insertions(+), 5 deletions(-) diff --git a/crypto/digest.c b/crypto/digest.c index 52845f53f8e1..6fd43bddd545 100644 --- a/crypto/digest.c +++ b/crypto/digest.c @@ -75,7 +75,7 @@ static int update2(struct hash_desc *desc, if (!nbytes) break; - sg = sg_next(sg); + sg = scatterwalk_sg_next(sg); } return 0; diff --git a/crypto/gcm.c b/crypto/gcm.c index 27483f361e80..502da929a5fc 100644 --- a/crypto/gcm.c +++ b/crypto/gcm.c @@ -100,7 +100,7 @@ static void crypto_gcm_ghash_update_sg(struct crypto_gcm_ghash_ctx *ctx, n = scatterwalk_clamp(&walk, len); if (!n) { - scatterwalk_start(&walk, sg_next(walk.sg)); + scatterwalk_start(&walk, scatterwalk_sg_next(walk.sg)); n = scatterwalk_clamp(&walk, len); } diff --git a/crypto/hmac.c b/crypto/hmac.c index 34c3706db85d..a1d016a50e7d 100644 --- a/crypto/hmac.c +++ b/crypto/hmac.c @@ -17,6 +17,7 @@ */ #include +#include #include #include #include @@ -160,7 +161,7 @@ static int hmac_digest(struct hash_desc *pdesc, struct scatterlist *sg, sg_init_table(sg1, 2); sg_set_buf(sg1, ipad, bs); - sg_chain(sg1, 2, sg); + scatterwalk_sg_chain(sg1, 2, sg); sg_init_table(sg2, 1); sg_set_buf(sg2, opad, bs + ds); diff --git a/crypto/scatterwalk.c b/crypto/scatterwalk.c index 12d19019e178..297e19d13c4e 100644 --- a/crypto/scatterwalk.c +++ b/crypto/scatterwalk.c @@ -61,7 +61,7 @@ static void scatterwalk_pagedone(struct scatter_walk *walk, int out, walk->offset += PAGE_SIZE - 1; walk->offset &= PAGE_MASK; if (walk->offset >= walk->sg->offset + walk->sg->length) - scatterwalk_start(walk, sg_next(walk->sg)); + scatterwalk_start(walk, scatterwalk_sg_next(walk->sg)); } } @@ -112,7 +112,7 @@ void scatterwalk_map_and_copy(void *buf, struct scatterlist *sg, break; offset += sg->length; - sg = sg_next(sg); + sg = scatterwalk_sg_next(sg); } scatterwalk_advance(&walk, start - offset); diff --git a/include/crypto/scatterwalk.h b/include/crypto/scatterwalk.h index 07b6f17122d2..bd62431c33bd 100644 --- a/include/crypto/scatterwalk.h +++ b/include/crypto/scatterwalk.h @@ -52,6 +52,17 @@ static inline void crypto_yield(u32 flags) cond_resched(); } +static inline void scatterwalk_sg_chain(struct scatterlist *sg1, int num, + struct scatterlist *sg2) +{ + sg_set_page(&sg1[num - 1], (void *)sg2, 0, 0); +} + +static inline struct scatterlist *scatterwalk_sg_next(struct scatterlist *sg) +{ + return (++sg)->length ? sg : (void *)sg_page(sg); +} + static inline unsigned long scatterwalk_samebuf(struct scatter_walk *walk_in, struct scatter_walk *walk_out) { -- cgit v1.2.3-59-g8ed1b From 7f6813786a6521380e1756ca5b4336bc63c5bf7d Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 6 Dec 2007 14:59:53 +0800 Subject: [CRYPTO] gcm: Put abreq in private context instead of on stack The abreq structure is currently allocated on the stack. This is broken if the underlying algorithm is asynchronous. This patch changes it so that it's taken from the private context instead which has been enlarged accordingly. Signed-off-by: Herbert Xu --- crypto/gcm.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/crypto/gcm.c b/crypto/gcm.c index 502da929a5fc..73565d607ee7 100644 --- a/crypto/gcm.c +++ b/crypto/gcm.c @@ -40,6 +40,7 @@ struct crypto_gcm_req_priv_ctx { u8 iauth_tag[16]; u8 counter[16]; struct crypto_gcm_ghash_ctx ghash; + struct ablkcipher_request abreq; }; static void crypto_gcm_ghash_init(struct crypto_gcm_ghash_ctx *ctx, u32 flags, @@ -280,16 +281,17 @@ static void crypto_gcm_encrypt_done(struct crypto_async_request *areq, int err) static int crypto_gcm_encrypt(struct aead_request *req) { - struct ablkcipher_request abreq; + struct crypto_gcm_req_priv_ctx *pctx = aead_request_ctx(req); + struct ablkcipher_request *abreq = &pctx->abreq; int err = 0; - err = crypto_gcm_init_crypt(&abreq, req, req->cryptlen, + err = crypto_gcm_init_crypt(abreq, req, req->cryptlen, crypto_gcm_encrypt_done); if (err) return err; if (req->cryptlen) { - err = crypto_ablkcipher_encrypt(&abreq); + err = crypto_ablkcipher_encrypt(abreq); if (err) return err; } @@ -304,9 +306,9 @@ static void crypto_gcm_decrypt_done(struct crypto_async_request *areq, int err) static int crypto_gcm_decrypt(struct aead_request *req) { - struct ablkcipher_request abreq; struct crypto_aead *aead = crypto_aead_reqtfm(req); struct crypto_gcm_req_priv_ctx *pctx = aead_request_ctx(req); + struct ablkcipher_request *abreq = &pctx->abreq; u8 *auth_tag = pctx->auth_tag; u8 *iauth_tag = pctx->iauth_tag; struct crypto_gcm_ghash_ctx *ghash = &pctx->ghash; @@ -318,7 +320,7 @@ static int crypto_gcm_decrypt(struct aead_request *req) return -EINVAL; cryptlen -= authsize; - err = crypto_gcm_init_crypt(&abreq, req, cryptlen, + err = crypto_gcm_init_crypt(abreq, req, cryptlen, crypto_gcm_decrypt_done); if (err) return err; @@ -330,7 +332,7 @@ static int crypto_gcm_decrypt(struct aead_request *req) if (memcmp(iauth_tag, auth_tag, authsize)) return -EBADMSG; - return crypto_ablkcipher_decrypt(&abreq); + return crypto_ablkcipher_decrypt(abreq); } static int crypto_gcm_init_tfm(struct crypto_tfm *tfm) @@ -353,7 +355,9 @@ static int crypto_gcm_init_tfm(struct crypto_tfm *tfm) align = max_t(unsigned long, crypto_ablkcipher_alignmask(ctr), __alignof__(u32) - 1); align &= ~(crypto_tfm_ctx_alignment() - 1); - tfm->crt_aead.reqsize = align + sizeof(struct crypto_gcm_req_priv_ctx); + tfm->crt_aead.reqsize = align + + sizeof(struct crypto_gcm_req_priv_ctx) + + crypto_ablkcipher_reqsize(ctr); return 0; } -- cgit v1.2.3-59-g8ed1b From eb6f13eb9f812f5812ed5d14f241309da369dee6 Mon Sep 17 00:00:00 2001 From: Tan Swee Heng Date: Fri, 7 Dec 2007 16:38:45 +0800 Subject: [CRYPTO] salsa20_generic: Fix multi-page processing This patch fixes the multi-page processing bug that affects large test vectors (the same bug that previously affected ctr.c). There is an optimization for the case walk.nbytes == nbytes. Also we now use crypto_xor() instead of adhoc XOR routines. Signed-off-by: Tan Swee Heng Signed-off-by: Herbert Xu --- crypto/salsa20_generic.c | 34 +++++++++++++++++++++++----------- 1 file changed, 23 insertions(+), 11 deletions(-) diff --git a/crypto/salsa20_generic.c b/crypto/salsa20_generic.c index b49328afcf0a..1fa4e4ddcab5 100644 --- a/crypto/salsa20_generic.c +++ b/crypto/salsa20_generic.c @@ -143,7 +143,6 @@ static void salsa20_encrypt_bytes(struct salsa20_ctx *ctx, u8 *dst, const u8 *src, unsigned int bytes) { u8 buf[64]; - int i; if (dst != src) memcpy(dst, src, bytes); @@ -156,15 +155,11 @@ static void salsa20_encrypt_bytes(struct salsa20_ctx *ctx, u8 *dst, ctx->input[9] = PLUSONE(ctx->input[9]); if (bytes <= 64) { - for (i = 0; i < bytes/4; ++i) - ((u32*)dst)[i] ^= ((u32*)buf)[i]; - for (i = bytes - bytes % 4; i < bytes; ++i) - dst[i] ^= buf[i]; + crypto_xor(dst, buf, bytes); return; } - for (i = 0; i < 64/4; ++i) - ((u32*)dst)[i] ^= ((u32*)buf)[i]; + crypto_xor(dst, buf, 64); bytes -= 64; dst += 64; } @@ -192,13 +187,30 @@ static int encrypt(struct blkcipher_desc *desc, int err; blkcipher_walk_init(&walk, dst, src, nbytes); - err = blkcipher_walk_virt(desc, &walk); + err = blkcipher_walk_virt_block(desc, &walk, 64); salsa20_ivsetup(ctx, walk.iv); - salsa20_encrypt_bytes(ctx, walk.dst.virt.addr, - walk.src.virt.addr, nbytes); - err = blkcipher_walk_done(desc, &walk, 0); + if (likely(walk.nbytes == nbytes)) + { + salsa20_encrypt_bytes(ctx, walk.dst.virt.addr, + walk.src.virt.addr, nbytes); + return blkcipher_walk_done(desc, &walk, 0); + } + + while (walk.nbytes >= 64) { + salsa20_encrypt_bytes(ctx, walk.dst.virt.addr, + walk.src.virt.addr, + walk.nbytes - (walk.nbytes % 64)); + err = blkcipher_walk_done(desc, &walk, walk.nbytes % 64); + } + + if (walk.nbytes) { + salsa20_encrypt_bytes(ctx, walk.dst.virt.addr, + walk.src.virt.addr, walk.nbytes); + err = blkcipher_walk_done(desc, &walk, 0); + } + return err; } -- cgit v1.2.3-59-g8ed1b From 8bff664cdf8797564fb6b59b7be028846fab8c27 Mon Sep 17 00:00:00 2001 From: Tan Swee Heng Date: Fri, 7 Dec 2007 16:41:29 +0800 Subject: [CRYPTO] tcrypt: Salsa20 large test vector This is a large test vector for Salsa20 that crosses the 4096-bytes page boundary. Signed-off-by: Tan Swee Heng Signed-off-by: Herbert Xu --- crypto/tcrypt.h | 1048 ++++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 1046 insertions(+), 2 deletions(-) diff --git a/crypto/tcrypt.h b/crypto/tcrypt.h index 439e290f3bce..d3c380f5fe83 100644 --- a/crypto/tcrypt.h +++ b/crypto/tcrypt.h @@ -6165,7 +6165,7 @@ static struct cipher_testvec seed_dec_tv_template[] = { } }; -#define SALSA20_STREAM_ENC_TEST_VECTORS 4 +#define SALSA20_STREAM_ENC_TEST_VECTORS 5 static struct cipher_testvec salsa20_stream_enc_tv_template[] = { /* * Testvectors from verified.test-vectors submitted to ECRYPT. @@ -6323,7 +6323,1051 @@ static struct cipher_testvec salsa20_stream_enc_tv_template[] = { 0x5A, }, .rlen = 129, - } + }, { /* large test vector generated using Crypto++ */ + .key = { + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, + 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, + }, + .klen = 32, + .iv = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + }, + .input = { + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, + 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, + 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, + 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, + 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, + 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, + 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, + 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, + 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, + 0x58, 0x59, 0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f, + 0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, + 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, + 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77, + 0x78, 0x79, 0x7a, 0x7b, 0x7c, 0x7d, 0x7e, 0x7f, + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, + 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, + 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, + 0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f, + 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, + 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, + 0xb0, 0xb1, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6, 0xb7, + 0xb8, 0xb9, 0xba, 0xbb, 0xbc, 0xbd, 0xbe, 0xbf, + 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, + 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, + 0xd0, 0xd1, 0xd2, 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, + 0xd8, 0xd9, 0xda, 0xdb, 0xdc, 0xdd, 0xde, 0xdf, + 0xe0, 0xe1, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, + 0xe8, 0xe9, 0xea, 0xeb, 0xec, 0xed, 0xee, 0xef, + 0xf0, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, + 0xf8, 0xf9, 0xfa, 0xfb, 0xfc, 0xfd, 0xfe, 0xff, + 0x00, 0x03, 0x06, 0x09, 0x0c, 0x0f, 0x12, 0x15, + 0x18, 0x1b, 0x1e, 0x21, 0x24, 0x27, 0x2a, 0x2d, + 0x30, 0x33, 0x36, 0x39, 0x3c, 0x3f, 0x42, 0x45, + 0x48, 0x4b, 0x4e, 0x51, 0x54, 0x57, 0x5a, 0x5d, + 0x60, 0x63, 0x66, 0x69, 0x6c, 0x6f, 0x72, 0x75, + 0x78, 0x7b, 0x7e, 0x81, 0x84, 0x87, 0x8a, 0x8d, + 0x90, 0x93, 0x96, 0x99, 0x9c, 0x9f, 0xa2, 0xa5, + 0xa8, 0xab, 0xae, 0xb1, 0xb4, 0xb7, 0xba, 0xbd, + 0xc0, 0xc3, 0xc6, 0xc9, 0xcc, 0xcf, 0xd2, 0xd5, + 0xd8, 0xdb, 0xde, 0xe1, 0xe4, 0xe7, 0xea, 0xed, + 0xf0, 0xf3, 0xf6, 0xf9, 0xfc, 0xff, 0x02, 0x05, + 0x08, 0x0b, 0x0e, 0x11, 0x14, 0x17, 0x1a, 0x1d, + 0x20, 0x23, 0x26, 0x29, 0x2c, 0x2f, 0x32, 0x35, + 0x38, 0x3b, 0x3e, 0x41, 0x44, 0x47, 0x4a, 0x4d, + 0x50, 0x53, 0x56, 0x59, 0x5c, 0x5f, 0x62, 0x65, + 0x68, 0x6b, 0x6e, 0x71, 0x74, 0x77, 0x7a, 0x7d, + 0x80, 0x83, 0x86, 0x89, 0x8c, 0x8f, 0x92, 0x95, + 0x98, 0x9b, 0x9e, 0xa1, 0xa4, 0xa7, 0xaa, 0xad, + 0xb0, 0xb3, 0xb6, 0xb9, 0xbc, 0xbf, 0xc2, 0xc5, + 0xc8, 0xcb, 0xce, 0xd1, 0xd4, 0xd7, 0xda, 0xdd, + 0xe0, 0xe3, 0xe6, 0xe9, 0xec, 0xef, 0xf2, 0xf5, + 0xf8, 0xfb, 0xfe, 0x01, 0x04, 0x07, 0x0a, 0x0d, + 0x10, 0x13, 0x16, 0x19, 0x1c, 0x1f, 0x22, 0x25, + 0x28, 0x2b, 0x2e, 0x31, 0x34, 0x37, 0x3a, 0x3d, + 0x40, 0x43, 0x46, 0x49, 0x4c, 0x4f, 0x52, 0x55, + 0x58, 0x5b, 0x5e, 0x61, 0x64, 0x67, 0x6a, 0x6d, + 0x70, 0x73, 0x76, 0x79, 0x7c, 0x7f, 0x82, 0x85, + 0x88, 0x8b, 0x8e, 0x91, 0x94, 0x97, 0x9a, 0x9d, + 0xa0, 0xa3, 0xa6, 0xa9, 0xac, 0xaf, 0xb2, 0xb5, + 0xb8, 0xbb, 0xbe, 0xc1, 0xc4, 0xc7, 0xca, 0xcd, + 0xd0, 0xd3, 0xd6, 0xd9, 0xdc, 0xdf, 0xe2, 0xe5, + 0xe8, 0xeb, 0xee, 0xf1, 0xf4, 0xf7, 0xfa, 0xfd, + 0x00, 0x05, 0x0a, 0x0f, 0x14, 0x19, 0x1e, 0x23, + 0x28, 0x2d, 0x32, 0x37, 0x3c, 0x41, 0x46, 0x4b, + 0x50, 0x55, 0x5a, 0x5f, 0x64, 0x69, 0x6e, 0x73, + 0x78, 0x7d, 0x82, 0x87, 0x8c, 0x91, 0x96, 0x9b, + 0xa0, 0xa5, 0xaa, 0xaf, 0xb4, 0xb9, 0xbe, 0xc3, + 0xc8, 0xcd, 0xd2, 0xd7, 0xdc, 0xe1, 0xe6, 0xeb, + 0xf0, 0xf5, 0xfa, 0xff, 0x04, 0x09, 0x0e, 0x13, + 0x18, 0x1d, 0x22, 0x27, 0x2c, 0x31, 0x36, 0x3b, + 0x40, 0x45, 0x4a, 0x4f, 0x54, 0x59, 0x5e, 0x63, + 0x68, 0x6d, 0x72, 0x77, 0x7c, 0x81, 0x86, 0x8b, + 0x90, 0x95, 0x9a, 0x9f, 0xa4, 0xa9, 0xae, 0xb3, + 0xb8, 0xbd, 0xc2, 0xc7, 0xcc, 0xd1, 0xd6, 0xdb, + 0xe0, 0xe5, 0xea, 0xef, 0xf4, 0xf9, 0xfe, 0x03, + 0x08, 0x0d, 0x12, 0x17, 0x1c, 0x21, 0x26, 0x2b, + 0x30, 0x35, 0x3a, 0x3f, 0x44, 0x49, 0x4e, 0x53, + 0x58, 0x5d, 0x62, 0x67, 0x6c, 0x71, 0x76, 0x7b, + 0x80, 0x85, 0x8a, 0x8f, 0x94, 0x99, 0x9e, 0xa3, + 0xa8, 0xad, 0xb2, 0xb7, 0xbc, 0xc1, 0xc6, 0xcb, + 0xd0, 0xd5, 0xda, 0xdf, 0xe4, 0xe9, 0xee, 0xf3, + 0xf8, 0xfd, 0x02, 0x07, 0x0c, 0x11, 0x16, 0x1b, + 0x20, 0x25, 0x2a, 0x2f, 0x34, 0x39, 0x3e, 0x43, + 0x48, 0x4d, 0x52, 0x57, 0x5c, 0x61, 0x66, 0x6b, + 0x70, 0x75, 0x7a, 0x7f, 0x84, 0x89, 0x8e, 0x93, + 0x98, 0x9d, 0xa2, 0xa7, 0xac, 0xb1, 0xb6, 0xbb, + 0xc0, 0xc5, 0xca, 0xcf, 0xd4, 0xd9, 0xde, 0xe3, + 0xe8, 0xed, 0xf2, 0xf7, 0xfc, 0x01, 0x06, 0x0b, + 0x10, 0x15, 0x1a, 0x1f, 0x24, 0x29, 0x2e, 0x33, + 0x38, 0x3d, 0x42, 0x47, 0x4c, 0x51, 0x56, 0x5b, + 0x60, 0x65, 0x6a, 0x6f, 0x74, 0x79, 0x7e, 0x83, + 0x88, 0x8d, 0x92, 0x97, 0x9c, 0xa1, 0xa6, 0xab, + 0xb0, 0xb5, 0xba, 0xbf, 0xc4, 0xc9, 0xce, 0xd3, + 0xd8, 0xdd, 0xe2, 0xe7, 0xec, 0xf1, 0xf6, 0xfb, + 0x00, 0x07, 0x0e, 0x15, 0x1c, 0x23, 0x2a, 0x31, + 0x38, 0x3f, 0x46, 0x4d, 0x54, 0x5b, 0x62, 0x69, + 0x70, 0x77, 0x7e, 0x85, 0x8c, 0x93, 0x9a, 0xa1, + 0xa8, 0xaf, 0xb6, 0xbd, 0xc4, 0xcb, 0xd2, 0xd9, + 0xe0, 0xe7, 0xee, 0xf5, 0xfc, 0x03, 0x0a, 0x11, + 0x18, 0x1f, 0x26, 0x2d, 0x34, 0x3b, 0x42, 0x49, + 0x50, 0x57, 0x5e, 0x65, 0x6c, 0x73, 0x7a, 0x81, + 0x88, 0x8f, 0x96, 0x9d, 0xa4, 0xab, 0xb2, 0xb9, + 0xc0, 0xc7, 0xce, 0xd5, 0xdc, 0xe3, 0xea, 0xf1, + 0xf8, 0xff, 0x06, 0x0d, 0x14, 0x1b, 0x22, 0x29, + 0x30, 0x37, 0x3e, 0x45, 0x4c, 0x53, 0x5a, 0x61, + 0x68, 0x6f, 0x76, 0x7d, 0x84, 0x8b, 0x92, 0x99, + 0xa0, 0xa7, 0xae, 0xb5, 0xbc, 0xc3, 0xca, 0xd1, + 0xd8, 0xdf, 0xe6, 0xed, 0xf4, 0xfb, 0x02, 0x09, + 0x10, 0x17, 0x1e, 0x25, 0x2c, 0x33, 0x3a, 0x41, + 0x48, 0x4f, 0x56, 0x5d, 0x64, 0x6b, 0x72, 0x79, + 0x80, 0x87, 0x8e, 0x95, 0x9c, 0xa3, 0xaa, 0xb1, + 0xb8, 0xbf, 0xc6, 0xcd, 0xd4, 0xdb, 0xe2, 0xe9, + 0xf0, 0xf7, 0xfe, 0x05, 0x0c, 0x13, 0x1a, 0x21, + 0x28, 0x2f, 0x36, 0x3d, 0x44, 0x4b, 0x52, 0x59, + 0x60, 0x67, 0x6e, 0x75, 0x7c, 0x83, 0x8a, 0x91, + 0x98, 0x9f, 0xa6, 0xad, 0xb4, 0xbb, 0xc2, 0xc9, + 0xd0, 0xd7, 0xde, 0xe5, 0xec, 0xf3, 0xfa, 0x01, + 0x08, 0x0f, 0x16, 0x1d, 0x24, 0x2b, 0x32, 0x39, + 0x40, 0x47, 0x4e, 0x55, 0x5c, 0x63, 0x6a, 0x71, + 0x78, 0x7f, 0x86, 0x8d, 0x94, 0x9b, 0xa2, 0xa9, + 0xb0, 0xb7, 0xbe, 0xc5, 0xcc, 0xd3, 0xda, 0xe1, + 0xe8, 0xef, 0xf6, 0xfd, 0x04, 0x0b, 0x12, 0x19, + 0x20, 0x27, 0x2e, 0x35, 0x3c, 0x43, 0x4a, 0x51, + 0x58, 0x5f, 0x66, 0x6d, 0x74, 0x7b, 0x82, 0x89, + 0x90, 0x97, 0x9e, 0xa5, 0xac, 0xb3, 0xba, 0xc1, + 0xc8, 0xcf, 0xd6, 0xdd, 0xe4, 0xeb, 0xf2, 0xf9, + 0x00, 0x09, 0x12, 0x1b, 0x24, 0x2d, 0x36, 0x3f, + 0x48, 0x51, 0x5a, 0x63, 0x6c, 0x75, 0x7e, 0x87, + 0x90, 0x99, 0xa2, 0xab, 0xb4, 0xbd, 0xc6, 0xcf, + 0xd8, 0xe1, 0xea, 0xf3, 0xfc, 0x05, 0x0e, 0x17, + 0x20, 0x29, 0x32, 0x3b, 0x44, 0x4d, 0x56, 0x5f, + 0x68, 0x71, 0x7a, 0x83, 0x8c, 0x95, 0x9e, 0xa7, + 0xb0, 0xb9, 0xc2, 0xcb, 0xd4, 0xdd, 0xe6, 0xef, + 0xf8, 0x01, 0x0a, 0x13, 0x1c, 0x25, 0x2e, 0x37, + 0x40, 0x49, 0x52, 0x5b, 0x64, 0x6d, 0x76, 0x7f, + 0x88, 0x91, 0x9a, 0xa3, 0xac, 0xb5, 0xbe, 0xc7, + 0xd0, 0xd9, 0xe2, 0xeb, 0xf4, 0xfd, 0x06, 0x0f, + 0x18, 0x21, 0x2a, 0x33, 0x3c, 0x45, 0x4e, 0x57, + 0x60, 0x69, 0x72, 0x7b, 0x84, 0x8d, 0x96, 0x9f, + 0xa8, 0xb1, 0xba, 0xc3, 0xcc, 0xd5, 0xde, 0xe7, + 0xf0, 0xf9, 0x02, 0x0b, 0x14, 0x1d, 0x26, 0x2f, + 0x38, 0x41, 0x4a, 0x53, 0x5c, 0x65, 0x6e, 0x77, + 0x80, 0x89, 0x92, 0x9b, 0xa4, 0xad, 0xb6, 0xbf, + 0xc8, 0xd1, 0xda, 0xe3, 0xec, 0xf5, 0xfe, 0x07, + 0x10, 0x19, 0x22, 0x2b, 0x34, 0x3d, 0x46, 0x4f, + 0x58, 0x61, 0x6a, 0x73, 0x7c, 0x85, 0x8e, 0x97, + 0xa0, 0xa9, 0xb2, 0xbb, 0xc4, 0xcd, 0xd6, 0xdf, + 0xe8, 0xf1, 0xfa, 0x03, 0x0c, 0x15, 0x1e, 0x27, + 0x30, 0x39, 0x42, 0x4b, 0x54, 0x5d, 0x66, 0x6f, + 0x78, 0x81, 0x8a, 0x93, 0x9c, 0xa5, 0xae, 0xb7, + 0xc0, 0xc9, 0xd2, 0xdb, 0xe4, 0xed, 0xf6, 0xff, + 0x08, 0x11, 0x1a, 0x23, 0x2c, 0x35, 0x3e, 0x47, + 0x50, 0x59, 0x62, 0x6b, 0x74, 0x7d, 0x86, 0x8f, + 0x98, 0xa1, 0xaa, 0xb3, 0xbc, 0xc5, 0xce, 0xd7, + 0xe0, 0xe9, 0xf2, 0xfb, 0x04, 0x0d, 0x16, 0x1f, + 0x28, 0x31, 0x3a, 0x43, 0x4c, 0x55, 0x5e, 0x67, + 0x70, 0x79, 0x82, 0x8b, 0x94, 0x9d, 0xa6, 0xaf, + 0xb8, 0xc1, 0xca, 0xd3, 0xdc, 0xe5, 0xee, 0xf7, + 0x00, 0x0b, 0x16, 0x21, 0x2c, 0x37, 0x42, 0x4d, + 0x58, 0x63, 0x6e, 0x79, 0x84, 0x8f, 0x9a, 0xa5, + 0xb0, 0xbb, 0xc6, 0xd1, 0xdc, 0xe7, 0xf2, 0xfd, + 0x08, 0x13, 0x1e, 0x29, 0x34, 0x3f, 0x4a, 0x55, + 0x60, 0x6b, 0x76, 0x81, 0x8c, 0x97, 0xa2, 0xad, + 0xb8, 0xc3, 0xce, 0xd9, 0xe4, 0xef, 0xfa, 0x05, + 0x10, 0x1b, 0x26, 0x31, 0x3c, 0x47, 0x52, 0x5d, + 0x68, 0x73, 0x7e, 0x89, 0x94, 0x9f, 0xaa, 0xb5, + 0xc0, 0xcb, 0xd6, 0xe1, 0xec, 0xf7, 0x02, 0x0d, + 0x18, 0x23, 0x2e, 0x39, 0x44, 0x4f, 0x5a, 0x65, + 0x70, 0x7b, 0x86, 0x91, 0x9c, 0xa7, 0xb2, 0xbd, + 0xc8, 0xd3, 0xde, 0xe9, 0xf4, 0xff, 0x0a, 0x15, + 0x20, 0x2b, 0x36, 0x41, 0x4c, 0x57, 0x62, 0x6d, + 0x78, 0x83, 0x8e, 0x99, 0xa4, 0xaf, 0xba, 0xc5, + 0xd0, 0xdb, 0xe6, 0xf1, 0xfc, 0x07, 0x12, 0x1d, + 0x28, 0x33, 0x3e, 0x49, 0x54, 0x5f, 0x6a, 0x75, + 0x80, 0x8b, 0x96, 0xa1, 0xac, 0xb7, 0xc2, 0xcd, + 0xd8, 0xe3, 0xee, 0xf9, 0x04, 0x0f, 0x1a, 0x25, + 0x30, 0x3b, 0x46, 0x51, 0x5c, 0x67, 0x72, 0x7d, + 0x88, 0x93, 0x9e, 0xa9, 0xb4, 0xbf, 0xca, 0xd5, + 0xe0, 0xeb, 0xf6, 0x01, 0x0c, 0x17, 0x22, 0x2d, + 0x38, 0x43, 0x4e, 0x59, 0x64, 0x6f, 0x7a, 0x85, + 0x90, 0x9b, 0xa6, 0xb1, 0xbc, 0xc7, 0xd2, 0xdd, + 0xe8, 0xf3, 0xfe, 0x09, 0x14, 0x1f, 0x2a, 0x35, + 0x40, 0x4b, 0x56, 0x61, 0x6c, 0x77, 0x82, 0x8d, + 0x98, 0xa3, 0xae, 0xb9, 0xc4, 0xcf, 0xda, 0xe5, + 0xf0, 0xfb, 0x06, 0x11, 0x1c, 0x27, 0x32, 0x3d, + 0x48, 0x53, 0x5e, 0x69, 0x74, 0x7f, 0x8a, 0x95, + 0xa0, 0xab, 0xb6, 0xc1, 0xcc, 0xd7, 0xe2, 0xed, + 0xf8, 0x03, 0x0e, 0x19, 0x24, 0x2f, 0x3a, 0x45, + 0x50, 0x5b, 0x66, 0x71, 0x7c, 0x87, 0x92, 0x9d, + 0xa8, 0xb3, 0xbe, 0xc9, 0xd4, 0xdf, 0xea, 0xf5, + 0x00, 0x0d, 0x1a, 0x27, 0x34, 0x41, 0x4e, 0x5b, + 0x68, 0x75, 0x82, 0x8f, 0x9c, 0xa9, 0xb6, 0xc3, + 0xd0, 0xdd, 0xea, 0xf7, 0x04, 0x11, 0x1e, 0x2b, + 0x38, 0x45, 0x52, 0x5f, 0x6c, 0x79, 0x86, 0x93, + 0xa0, 0xad, 0xba, 0xc7, 0xd4, 0xe1, 0xee, 0xfb, + 0x08, 0x15, 0x22, 0x2f, 0x3c, 0x49, 0x56, 0x63, + 0x70, 0x7d, 0x8a, 0x97, 0xa4, 0xb1, 0xbe, 0xcb, + 0xd8, 0xe5, 0xf2, 0xff, 0x0c, 0x19, 0x26, 0x33, + 0x40, 0x4d, 0x5a, 0x67, 0x74, 0x81, 0x8e, 0x9b, + 0xa8, 0xb5, 0xc2, 0xcf, 0xdc, 0xe9, 0xf6, 0x03, + 0x10, 0x1d, 0x2a, 0x37, 0x44, 0x51, 0x5e, 0x6b, + 0x78, 0x85, 0x92, 0x9f, 0xac, 0xb9, 0xc6, 0xd3, + 0xe0, 0xed, 0xfa, 0x07, 0x14, 0x21, 0x2e, 0x3b, + 0x48, 0x55, 0x62, 0x6f, 0x7c, 0x89, 0x96, 0xa3, + 0xb0, 0xbd, 0xca, 0xd7, 0xe4, 0xf1, 0xfe, 0x0b, + 0x18, 0x25, 0x32, 0x3f, 0x4c, 0x59, 0x66, 0x73, + 0x80, 0x8d, 0x9a, 0xa7, 0xb4, 0xc1, 0xce, 0xdb, + 0xe8, 0xf5, 0x02, 0x0f, 0x1c, 0x29, 0x36, 0x43, + 0x50, 0x5d, 0x6a, 0x77, 0x84, 0x91, 0x9e, 0xab, + 0xb8, 0xc5, 0xd2, 0xdf, 0xec, 0xf9, 0x06, 0x13, + 0x20, 0x2d, 0x3a, 0x47, 0x54, 0x61, 0x6e, 0x7b, + 0x88, 0x95, 0xa2, 0xaf, 0xbc, 0xc9, 0xd6, 0xe3, + 0xf0, 0xfd, 0x0a, 0x17, 0x24, 0x31, 0x3e, 0x4b, + 0x58, 0x65, 0x72, 0x7f, 0x8c, 0x99, 0xa6, 0xb3, + 0xc0, 0xcd, 0xda, 0xe7, 0xf4, 0x01, 0x0e, 0x1b, + 0x28, 0x35, 0x42, 0x4f, 0x5c, 0x69, 0x76, 0x83, + 0x90, 0x9d, 0xaa, 0xb7, 0xc4, 0xd1, 0xde, 0xeb, + 0xf8, 0x05, 0x12, 0x1f, 0x2c, 0x39, 0x46, 0x53, + 0x60, 0x6d, 0x7a, 0x87, 0x94, 0xa1, 0xae, 0xbb, + 0xc8, 0xd5, 0xe2, 0xef, 0xfc, 0x09, 0x16, 0x23, + 0x30, 0x3d, 0x4a, 0x57, 0x64, 0x71, 0x7e, 0x8b, + 0x98, 0xa5, 0xb2, 0xbf, 0xcc, 0xd9, 0xe6, 0xf3, + 0x00, 0x0f, 0x1e, 0x2d, 0x3c, 0x4b, 0x5a, 0x69, + 0x78, 0x87, 0x96, 0xa5, 0xb4, 0xc3, 0xd2, 0xe1, + 0xf0, 0xff, 0x0e, 0x1d, 0x2c, 0x3b, 0x4a, 0x59, + 0x68, 0x77, 0x86, 0x95, 0xa4, 0xb3, 0xc2, 0xd1, + 0xe0, 0xef, 0xfe, 0x0d, 0x1c, 0x2b, 0x3a, 0x49, + 0x58, 0x67, 0x76, 0x85, 0x94, 0xa3, 0xb2, 0xc1, + 0xd0, 0xdf, 0xee, 0xfd, 0x0c, 0x1b, 0x2a, 0x39, + 0x48, 0x57, 0x66, 0x75, 0x84, 0x93, 0xa2, 0xb1, + 0xc0, 0xcf, 0xde, 0xed, 0xfc, 0x0b, 0x1a, 0x29, + 0x38, 0x47, 0x56, 0x65, 0x74, 0x83, 0x92, 0xa1, + 0xb0, 0xbf, 0xce, 0xdd, 0xec, 0xfb, 0x0a, 0x19, + 0x28, 0x37, 0x46, 0x55, 0x64, 0x73, 0x82, 0x91, + 0xa0, 0xaf, 0xbe, 0xcd, 0xdc, 0xeb, 0xfa, 0x09, + 0x18, 0x27, 0x36, 0x45, 0x54, 0x63, 0x72, 0x81, + 0x90, 0x9f, 0xae, 0xbd, 0xcc, 0xdb, 0xea, 0xf9, + 0x08, 0x17, 0x26, 0x35, 0x44, 0x53, 0x62, 0x71, + 0x80, 0x8f, 0x9e, 0xad, 0xbc, 0xcb, 0xda, 0xe9, + 0xf8, 0x07, 0x16, 0x25, 0x34, 0x43, 0x52, 0x61, + 0x70, 0x7f, 0x8e, 0x9d, 0xac, 0xbb, 0xca, 0xd9, + 0xe8, 0xf7, 0x06, 0x15, 0x24, 0x33, 0x42, 0x51, + 0x60, 0x6f, 0x7e, 0x8d, 0x9c, 0xab, 0xba, 0xc9, + 0xd8, 0xe7, 0xf6, 0x05, 0x14, 0x23, 0x32, 0x41, + 0x50, 0x5f, 0x6e, 0x7d, 0x8c, 0x9b, 0xaa, 0xb9, + 0xc8, 0xd7, 0xe6, 0xf5, 0x04, 0x13, 0x22, 0x31, + 0x40, 0x4f, 0x5e, 0x6d, 0x7c, 0x8b, 0x9a, 0xa9, + 0xb8, 0xc7, 0xd6, 0xe5, 0xf4, 0x03, 0x12, 0x21, + 0x30, 0x3f, 0x4e, 0x5d, 0x6c, 0x7b, 0x8a, 0x99, + 0xa8, 0xb7, 0xc6, 0xd5, 0xe4, 0xf3, 0x02, 0x11, + 0x20, 0x2f, 0x3e, 0x4d, 0x5c, 0x6b, 0x7a, 0x89, + 0x98, 0xa7, 0xb6, 0xc5, 0xd4, 0xe3, 0xf2, 0x01, + 0x10, 0x1f, 0x2e, 0x3d, 0x4c, 0x5b, 0x6a, 0x79, + 0x88, 0x97, 0xa6, 0xb5, 0xc4, 0xd3, 0xe2, 0xf1, + 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, + 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff, + 0x10, 0x21, 0x32, 0x43, 0x54, 0x65, 0x76, 0x87, + 0x98, 0xa9, 0xba, 0xcb, 0xdc, 0xed, 0xfe, 0x0f, + 0x20, 0x31, 0x42, 0x53, 0x64, 0x75, 0x86, 0x97, + 0xa8, 0xb9, 0xca, 0xdb, 0xec, 0xfd, 0x0e, 0x1f, + 0x30, 0x41, 0x52, 0x63, 0x74, 0x85, 0x96, 0xa7, + 0xb8, 0xc9, 0xda, 0xeb, 0xfc, 0x0d, 0x1e, 0x2f, + 0x40, 0x51, 0x62, 0x73, 0x84, 0x95, 0xa6, 0xb7, + 0xc8, 0xd9, 0xea, 0xfb, 0x0c, 0x1d, 0x2e, 0x3f, + 0x50, 0x61, 0x72, 0x83, 0x94, 0xa5, 0xb6, 0xc7, + 0xd8, 0xe9, 0xfa, 0x0b, 0x1c, 0x2d, 0x3e, 0x4f, + 0x60, 0x71, 0x82, 0x93, 0xa4, 0xb5, 0xc6, 0xd7, + 0xe8, 0xf9, 0x0a, 0x1b, 0x2c, 0x3d, 0x4e, 0x5f, + 0x70, 0x81, 0x92, 0xa3, 0xb4, 0xc5, 0xd6, 0xe7, + 0xf8, 0x09, 0x1a, 0x2b, 0x3c, 0x4d, 0x5e, 0x6f, + 0x80, 0x91, 0xa2, 0xb3, 0xc4, 0xd5, 0xe6, 0xf7, + 0x08, 0x19, 0x2a, 0x3b, 0x4c, 0x5d, 0x6e, 0x7f, + 0x90, 0xa1, 0xb2, 0xc3, 0xd4, 0xe5, 0xf6, 0x07, + 0x18, 0x29, 0x3a, 0x4b, 0x5c, 0x6d, 0x7e, 0x8f, + 0xa0, 0xb1, 0xc2, 0xd3, 0xe4, 0xf5, 0x06, 0x17, + 0x28, 0x39, 0x4a, 0x5b, 0x6c, 0x7d, 0x8e, 0x9f, + 0xb0, 0xc1, 0xd2, 0xe3, 0xf4, 0x05, 0x16, 0x27, + 0x38, 0x49, 0x5a, 0x6b, 0x7c, 0x8d, 0x9e, 0xaf, + 0xc0, 0xd1, 0xe2, 0xf3, 0x04, 0x15, 0x26, 0x37, + 0x48, 0x59, 0x6a, 0x7b, 0x8c, 0x9d, 0xae, 0xbf, + 0xd0, 0xe1, 0xf2, 0x03, 0x14, 0x25, 0x36, 0x47, + 0x58, 0x69, 0x7a, 0x8b, 0x9c, 0xad, 0xbe, 0xcf, + 0xe0, 0xf1, 0x02, 0x13, 0x24, 0x35, 0x46, 0x57, + 0x68, 0x79, 0x8a, 0x9b, 0xac, 0xbd, 0xce, 0xdf, + 0xf0, 0x01, 0x12, 0x23, 0x34, 0x45, 0x56, 0x67, + 0x78, 0x89, 0x9a, 0xab, 0xbc, 0xcd, 0xde, 0xef, + 0x00, 0x13, 0x26, 0x39, 0x4c, 0x5f, 0x72, 0x85, + 0x98, 0xab, 0xbe, 0xd1, 0xe4, 0xf7, 0x0a, 0x1d, + 0x30, 0x43, 0x56, 0x69, 0x7c, 0x8f, 0xa2, 0xb5, + 0xc8, 0xdb, 0xee, 0x01, 0x14, 0x27, 0x3a, 0x4d, + 0x60, 0x73, 0x86, 0x99, 0xac, 0xbf, 0xd2, 0xe5, + 0xf8, 0x0b, 0x1e, 0x31, 0x44, 0x57, 0x6a, 0x7d, + 0x90, 0xa3, 0xb6, 0xc9, 0xdc, 0xef, 0x02, 0x15, + 0x28, 0x3b, 0x4e, 0x61, 0x74, 0x87, 0x9a, 0xad, + 0xc0, 0xd3, 0xe6, 0xf9, 0x0c, 0x1f, 0x32, 0x45, + 0x58, 0x6b, 0x7e, 0x91, 0xa4, 0xb7, 0xca, 0xdd, + 0xf0, 0x03, 0x16, 0x29, 0x3c, 0x4f, 0x62, 0x75, + 0x88, 0x9b, 0xae, 0xc1, 0xd4, 0xe7, 0xfa, 0x0d, + 0x20, 0x33, 0x46, 0x59, 0x6c, 0x7f, 0x92, 0xa5, + 0xb8, 0xcb, 0xde, 0xf1, 0x04, 0x17, 0x2a, 0x3d, + 0x50, 0x63, 0x76, 0x89, 0x9c, 0xaf, 0xc2, 0xd5, + 0xe8, 0xfb, 0x0e, 0x21, 0x34, 0x47, 0x5a, 0x6d, + 0x80, 0x93, 0xa6, 0xb9, 0xcc, 0xdf, 0xf2, 0x05, + 0x18, 0x2b, 0x3e, 0x51, 0x64, 0x77, 0x8a, 0x9d, + 0xb0, 0xc3, 0xd6, 0xe9, 0xfc, 0x0f, 0x22, 0x35, + 0x48, 0x5b, 0x6e, 0x81, 0x94, 0xa7, 0xba, 0xcd, + 0xe0, 0xf3, 0x06, 0x19, 0x2c, 0x3f, 0x52, 0x65, + 0x78, 0x8b, 0x9e, 0xb1, 0xc4, 0xd7, 0xea, 0xfd, + 0x10, 0x23, 0x36, 0x49, 0x5c, 0x6f, 0x82, 0x95, + 0xa8, 0xbb, 0xce, 0xe1, 0xf4, 0x07, 0x1a, 0x2d, + 0x40, 0x53, 0x66, 0x79, 0x8c, 0x9f, 0xb2, 0xc5, + 0xd8, 0xeb, 0xfe, 0x11, 0x24, 0x37, 0x4a, 0x5d, + 0x70, 0x83, 0x96, 0xa9, 0xbc, 0xcf, 0xe2, 0xf5, + 0x08, 0x1b, 0x2e, 0x41, 0x54, 0x67, 0x7a, 0x8d, + 0xa0, 0xb3, 0xc6, 0xd9, 0xec, 0xff, 0x12, 0x25, + 0x38, 0x4b, 0x5e, 0x71, 0x84, 0x97, 0xaa, 0xbd, + 0xd0, 0xe3, 0xf6, 0x09, 0x1c, 0x2f, 0x42, 0x55, + 0x68, 0x7b, 0x8e, 0xa1, 0xb4, 0xc7, 0xda, 0xed, + 0x00, 0x15, 0x2a, 0x3f, 0x54, 0x69, 0x7e, 0x93, + 0xa8, 0xbd, 0xd2, 0xe7, 0xfc, 0x11, 0x26, 0x3b, + 0x50, 0x65, 0x7a, 0x8f, 0xa4, 0xb9, 0xce, 0xe3, + 0xf8, 0x0d, 0x22, 0x37, 0x4c, 0x61, 0x76, 0x8b, + 0xa0, 0xb5, 0xca, 0xdf, 0xf4, 0x09, 0x1e, 0x33, + 0x48, 0x5d, 0x72, 0x87, 0x9c, 0xb1, 0xc6, 0xdb, + 0xf0, 0x05, 0x1a, 0x2f, 0x44, 0x59, 0x6e, 0x83, + 0x98, 0xad, 0xc2, 0xd7, 0xec, 0x01, 0x16, 0x2b, + 0x40, 0x55, 0x6a, 0x7f, 0x94, 0xa9, 0xbe, 0xd3, + 0xe8, 0xfd, 0x12, 0x27, 0x3c, 0x51, 0x66, 0x7b, + 0x90, 0xa5, 0xba, 0xcf, 0xe4, 0xf9, 0x0e, 0x23, + 0x38, 0x4d, 0x62, 0x77, 0x8c, 0xa1, 0xb6, 0xcb, + 0xe0, 0xf5, 0x0a, 0x1f, 0x34, 0x49, 0x5e, 0x73, + 0x88, 0x9d, 0xb2, 0xc7, 0xdc, 0xf1, 0x06, 0x1b, + 0x30, 0x45, 0x5a, 0x6f, 0x84, 0x99, 0xae, 0xc3, + 0xd8, 0xed, 0x02, 0x17, 0x2c, 0x41, 0x56, 0x6b, + 0x80, 0x95, 0xaa, 0xbf, 0xd4, 0xe9, 0xfe, 0x13, + 0x28, 0x3d, 0x52, 0x67, 0x7c, 0x91, 0xa6, 0xbb, + 0xd0, 0xe5, 0xfa, 0x0f, 0x24, 0x39, 0x4e, 0x63, + 0x78, 0x8d, 0xa2, 0xb7, 0xcc, 0xe1, 0xf6, 0x0b, + 0x20, 0x35, 0x4a, 0x5f, 0x74, 0x89, 0x9e, 0xb3, + 0xc8, 0xdd, 0xf2, 0x07, 0x1c, 0x31, 0x46, 0x5b, + 0x70, 0x85, 0x9a, 0xaf, 0xc4, 0xd9, 0xee, 0x03, + 0x18, 0x2d, 0x42, 0x57, 0x6c, 0x81, 0x96, 0xab, + 0xc0, 0xd5, 0xea, 0xff, 0x14, 0x29, 0x3e, 0x53, + 0x68, 0x7d, 0x92, 0xa7, 0xbc, 0xd1, 0xe6, 0xfb, + 0x10, 0x25, 0x3a, 0x4f, 0x64, 0x79, 0x8e, 0xa3, + 0xb8, 0xcd, 0xe2, 0xf7, 0x0c, 0x21, 0x36, 0x4b, + 0x60, 0x75, 0x8a, 0x9f, 0xb4, 0xc9, 0xde, 0xf3, + 0x08, 0x1d, 0x32, 0x47, 0x5c, 0x71, 0x86, 0x9b, + 0xb0, 0xc5, 0xda, 0xef, 0x04, 0x19, 0x2e, 0x43, + 0x58, 0x6d, 0x82, 0x97, 0xac, 0xc1, 0xd6, 0xeb, + 0x00, 0x17, 0x2e, 0x45, 0x5c, 0x73, 0x8a, 0xa1, + 0xb8, 0xcf, 0xe6, 0xfd, 0x14, 0x2b, 0x42, 0x59, + 0x70, 0x87, 0x9e, 0xb5, 0xcc, 0xe3, 0xfa, 0x11, + 0x28, 0x3f, 0x56, 0x6d, 0x84, 0x9b, 0xb2, 0xc9, + 0xe0, 0xf7, 0x0e, 0x25, 0x3c, 0x53, 0x6a, 0x81, + 0x98, 0xaf, 0xc6, 0xdd, 0xf4, 0x0b, 0x22, 0x39, + 0x50, 0x67, 0x7e, 0x95, 0xac, 0xc3, 0xda, 0xf1, + 0x08, 0x1f, 0x36, 0x4d, 0x64, 0x7b, 0x92, 0xa9, + 0xc0, 0xd7, 0xee, 0x05, 0x1c, 0x33, 0x4a, 0x61, + 0x78, 0x8f, 0xa6, 0xbd, 0xd4, 0xeb, 0x02, 0x19, + 0x30, 0x47, 0x5e, 0x75, 0x8c, 0xa3, 0xba, 0xd1, + 0xe8, 0xff, 0x16, 0x2d, 0x44, 0x5b, 0x72, 0x89, + 0xa0, 0xb7, 0xce, 0xe5, 0xfc, 0x13, 0x2a, 0x41, + 0x58, 0x6f, 0x86, 0x9d, 0xb4, 0xcb, 0xe2, 0xf9, + 0x10, 0x27, 0x3e, 0x55, 0x6c, 0x83, 0x9a, 0xb1, + 0xc8, 0xdf, 0xf6, 0x0d, 0x24, 0x3b, 0x52, 0x69, + 0x80, 0x97, 0xae, 0xc5, 0xdc, 0xf3, 0x0a, 0x21, + 0x38, 0x4f, 0x66, 0x7d, 0x94, 0xab, 0xc2, 0xd9, + 0xf0, 0x07, 0x1e, 0x35, 0x4c, 0x63, 0x7a, 0x91, + 0xa8, 0xbf, 0xd6, 0xed, 0x04, 0x1b, 0x32, 0x49, + 0x60, 0x77, 0x8e, 0xa5, 0xbc, 0xd3, 0xea, 0x01, + 0x18, 0x2f, 0x46, 0x5d, 0x74, 0x8b, 0xa2, 0xb9, + 0xd0, 0xe7, 0xfe, 0x15, 0x2c, 0x43, 0x5a, 0x71, + 0x88, 0x9f, 0xb6, 0xcd, 0xe4, 0xfb, 0x12, 0x29, + 0x40, 0x57, 0x6e, 0x85, 0x9c, 0xb3, 0xca, 0xe1, + 0xf8, 0x0f, 0x26, 0x3d, 0x54, 0x6b, 0x82, 0x99, + 0xb0, 0xc7, 0xde, 0xf5, 0x0c, 0x23, 0x3a, 0x51, + 0x68, 0x7f, 0x96, 0xad, 0xc4, 0xdb, 0xf2, 0x09, + 0x20, 0x37, 0x4e, 0x65, 0x7c, 0x93, 0xaa, 0xc1, + 0xd8, 0xef, 0x06, 0x1d, 0x34, 0x4b, 0x62, 0x79, + 0x90, 0xa7, 0xbe, 0xd5, 0xec, 0x03, 0x1a, 0x31, + 0x48, 0x5f, 0x76, 0x8d, 0xa4, 0xbb, 0xd2, 0xe9, + 0x00, 0x19, 0x32, 0x4b, 0x64, 0x7d, 0x96, 0xaf, + 0xc8, 0xe1, 0xfa, 0x13, 0x2c, 0x45, 0x5e, 0x77, + 0x90, 0xa9, 0xc2, 0xdb, 0xf4, 0x0d, 0x26, 0x3f, + 0x58, 0x71, 0x8a, 0xa3, 0xbc, 0xd5, 0xee, 0x07, + 0x20, 0x39, 0x52, 0x6b, 0x84, 0x9d, 0xb6, 0xcf, + 0xe8, 0x01, 0x1a, 0x33, 0x4c, 0x65, 0x7e, 0x97, + 0xb0, 0xc9, 0xe2, 0xfb, 0x14, 0x2d, 0x46, 0x5f, + 0x78, 0x91, 0xaa, 0xc3, 0xdc, 0xf5, 0x0e, 0x27, + 0x40, 0x59, 0x72, 0x8b, 0xa4, 0xbd, 0xd6, 0xef, + 0x08, 0x21, 0x3a, 0x53, 0x6c, 0x85, 0x9e, 0xb7, + 0xd0, 0xe9, 0x02, 0x1b, 0x34, 0x4d, 0x66, 0x7f, + 0x98, 0xb1, 0xca, 0xe3, 0xfc, 0x15, 0x2e, 0x47, + 0x60, 0x79, 0x92, 0xab, 0xc4, 0xdd, 0xf6, 0x0f, + 0x28, 0x41, 0x5a, 0x73, 0x8c, 0xa5, 0xbe, 0xd7, + 0xf0, 0x09, 0x22, 0x3b, 0x54, 0x6d, 0x86, 0x9f, + 0xb8, 0xd1, 0xea, 0x03, 0x1c, 0x35, 0x4e, 0x67, + 0x80, 0x99, 0xb2, 0xcb, 0xe4, 0xfd, 0x16, 0x2f, + 0x48, 0x61, 0x7a, 0x93, 0xac, 0xc5, 0xde, 0xf7, + 0x10, 0x29, 0x42, 0x5b, 0x74, 0x8d, 0xa6, 0xbf, + 0xd8, 0xf1, 0x0a, 0x23, 0x3c, 0x55, 0x6e, 0x87, + 0xa0, 0xb9, 0xd2, 0xeb, 0x04, 0x1d, 0x36, 0x4f, + 0x68, 0x81, 0x9a, 0xb3, 0xcc, 0xe5, 0xfe, 0x17, + 0x30, 0x49, 0x62, 0x7b, 0x94, 0xad, 0xc6, 0xdf, + 0xf8, 0x11, 0x2a, 0x43, 0x5c, 0x75, 0x8e, 0xa7, + 0xc0, 0xd9, 0xf2, 0x0b, 0x24, 0x3d, 0x56, 0x6f, + 0x88, 0xa1, 0xba, 0xd3, 0xec, 0x05, 0x1e, 0x37, + 0x50, 0x69, 0x82, 0x9b, 0xb4, 0xcd, 0xe6, 0xff, + 0x18, 0x31, 0x4a, 0x63, 0x7c, 0x95, 0xae, 0xc7, + 0xe0, 0xf9, 0x12, 0x2b, 0x44, 0x5d, 0x76, 0x8f, + 0xa8, 0xc1, 0xda, 0xf3, 0x0c, 0x25, 0x3e, 0x57, + 0x70, 0x89, 0xa2, 0xbb, 0xd4, 0xed, 0x06, 0x1f, + 0x38, 0x51, 0x6a, 0x83, 0x9c, 0xb5, 0xce, 0xe7, + 0x00, 0x1b, 0x36, 0x51, 0x6c, 0x87, 0xa2, 0xbd, + 0xd8, 0xf3, 0x0e, 0x29, 0x44, 0x5f, 0x7a, 0x95, + 0xb0, 0xcb, 0xe6, 0x01, 0x1c, 0x37, 0x52, 0x6d, + 0x88, 0xa3, 0xbe, 0xd9, 0xf4, 0x0f, 0x2a, 0x45, + 0x60, 0x7b, 0x96, 0xb1, 0xcc, 0xe7, 0x02, 0x1d, + 0x38, 0x53, 0x6e, 0x89, 0xa4, 0xbf, 0xda, 0xf5, + 0x10, 0x2b, 0x46, 0x61, 0x7c, 0x97, 0xb2, 0xcd, + 0xe8, 0x03, 0x1e, 0x39, 0x54, 0x6f, 0x8a, 0xa5, + 0xc0, 0xdb, 0xf6, 0x11, 0x2c, 0x47, 0x62, 0x7d, + 0x98, 0xb3, 0xce, 0xe9, 0x04, 0x1f, 0x3a, 0x55, + 0x70, 0x8b, 0xa6, 0xc1, 0xdc, 0xf7, 0x12, 0x2d, + 0x48, 0x63, 0x7e, 0x99, 0xb4, 0xcf, 0xea, 0x05, + 0x20, 0x3b, 0x56, 0x71, 0x8c, 0xa7, 0xc2, 0xdd, + 0xf8, 0x13, 0x2e, 0x49, 0x64, 0x7f, 0x9a, 0xb5, + 0xd0, 0xeb, 0x06, 0x21, 0x3c, 0x57, 0x72, 0x8d, + 0xa8, 0xc3, 0xde, 0xf9, 0x14, 0x2f, 0x4a, 0x65, + 0x80, 0x9b, 0xb6, 0xd1, 0xec, 0x07, 0x22, 0x3d, + 0x58, 0x73, 0x8e, 0xa9, 0xc4, 0xdf, 0xfa, 0x15, + 0x30, 0x4b, 0x66, 0x81, 0x9c, 0xb7, 0xd2, 0xed, + 0x08, 0x23, 0x3e, 0x59, 0x74, 0x8f, 0xaa, 0xc5, + 0xe0, 0xfb, 0x16, 0x31, 0x4c, 0x67, 0x82, 0x9d, + 0xb8, 0xd3, 0xee, 0x09, 0x24, 0x3f, 0x5a, 0x75, + 0x90, 0xab, 0xc6, 0xe1, 0xfc, 0x17, 0x32, 0x4d, + 0x68, 0x83, 0x9e, 0xb9, 0xd4, 0xef, 0x0a, 0x25, + 0x40, 0x5b, 0x76, 0x91, 0xac, 0xc7, 0xe2, 0xfd, + 0x18, 0x33, 0x4e, 0x69, 0x84, 0x9f, 0xba, 0xd5, + 0xf0, 0x0b, 0x26, 0x41, 0x5c, 0x77, 0x92, 0xad, + 0xc8, 0xe3, 0xfe, 0x19, 0x34, 0x4f, 0x6a, 0x85, + 0xa0, 0xbb, 0xd6, 0xf1, 0x0c, 0x27, 0x42, 0x5d, + 0x78, 0x93, 0xae, 0xc9, 0xe4, 0xff, 0x1a, 0x35, + 0x50, 0x6b, 0x86, 0xa1, 0xbc, 0xd7, 0xf2, 0x0d, + 0x28, 0x43, 0x5e, 0x79, 0x94, 0xaf, 0xca, 0xe5, + 0x00, 0x1d, 0x3a, 0x57, 0x74, 0x91, 0xae, 0xcb, + 0xe8, 0x05, 0x22, 0x3f, 0x5c, 0x79, 0x96, 0xb3, + 0xd0, 0xed, 0x0a, 0x27, 0x44, 0x61, 0x7e, 0x9b, + 0xb8, 0xd5, 0xf2, 0x0f, 0x2c, 0x49, 0x66, 0x83, + 0xa0, 0xbd, 0xda, 0xf7, 0x14, 0x31, 0x4e, 0x6b, + 0x88, 0xa5, 0xc2, 0xdf, 0xfc, 0x19, 0x36, 0x53, + 0x70, 0x8d, 0xaa, 0xc7, 0xe4, 0x01, 0x1e, 0x3b, + 0x58, 0x75, 0x92, 0xaf, 0xcc, 0xe9, 0x06, 0x23, + 0x40, 0x5d, 0x7a, 0x97, 0xb4, 0xd1, 0xee, 0x0b, + 0x28, 0x45, 0x62, 0x7f, 0x9c, 0xb9, 0xd6, 0xf3, + 0x10, 0x2d, 0x4a, 0x67, 0x84, 0xa1, 0xbe, 0xdb, + 0xf8, 0x15, 0x32, 0x4f, 0x6c, 0x89, 0xa6, 0xc3, + 0xe0, 0xfd, 0x1a, 0x37, 0x54, 0x71, 0x8e, 0xab, + 0xc8, 0xe5, 0x02, 0x1f, 0x3c, 0x59, 0x76, 0x93, + 0xb0, 0xcd, 0xea, 0x07, 0x24, 0x41, 0x5e, 0x7b, + 0x98, 0xb5, 0xd2, 0xef, 0x0c, 0x29, 0x46, 0x63, + 0x80, 0x9d, 0xba, 0xd7, 0xf4, 0x11, 0x2e, 0x4b, + 0x68, 0x85, 0xa2, 0xbf, 0xdc, 0xf9, 0x16, 0x33, + 0x50, 0x6d, 0x8a, 0xa7, 0xc4, 0xe1, 0xfe, 0x1b, + 0x38, 0x55, 0x72, 0x8f, 0xac, 0xc9, 0xe6, 0x03, + 0x20, 0x3d, 0x5a, 0x77, 0x94, 0xb1, 0xce, 0xeb, + 0x08, 0x25, 0x42, 0x5f, 0x7c, 0x99, 0xb6, 0xd3, + 0xf0, 0x0d, 0x2a, 0x47, 0x64, 0x81, 0x9e, 0xbb, + 0xd8, 0xf5, 0x12, 0x2f, 0x4c, 0x69, 0x86, 0xa3, + 0xc0, 0xdd, 0xfa, 0x17, 0x34, 0x51, 0x6e, 0x8b, + 0xa8, 0xc5, 0xe2, 0xff, 0x1c, 0x39, 0x56, 0x73, + 0x90, 0xad, 0xca, 0xe7, 0x04, 0x21, 0x3e, 0x5b, + 0x78, 0x95, 0xb2, 0xcf, 0xec, 0x09, 0x26, 0x43, + 0x60, 0x7d, 0x9a, 0xb7, 0xd4, 0xf1, 0x0e, 0x2b, + 0x48, 0x65, 0x82, 0x9f, 0xbc, 0xd9, 0xf6, 0x13, + 0x30, 0x4d, 0x6a, 0x87, 0xa4, 0xc1, 0xde, 0xfb, + 0x18, 0x35, 0x52, 0x6f, 0x8c, 0xa9, 0xc6, 0xe3, + 0x00, 0x1f, 0x3e, 0x5d, 0x7c, 0x9b, 0xba, 0xd9, + 0xf8, 0x17, 0x36, 0x55, 0x74, 0x93, 0xb2, 0xd1, + 0xf0, 0x0f, 0x2e, 0x4d, 0x6c, 0x8b, 0xaa, 0xc9, + 0xe8, 0x07, 0x26, 0x45, 0x64, 0x83, 0xa2, 0xc1, + 0xe0, 0xff, 0x1e, 0x3d, 0x5c, 0x7b, 0x9a, 0xb9, + 0xd8, 0xf7, 0x16, 0x35, 0x54, 0x73, 0x92, 0xb1, + 0xd0, 0xef, 0x0e, 0x2d, 0x4c, 0x6b, 0x8a, 0xa9, + 0xc8, 0xe7, 0x06, 0x25, 0x44, 0x63, 0x82, 0xa1, + 0xc0, 0xdf, 0xfe, 0x1d, 0x3c, 0x5b, 0x7a, 0x99, + 0xb8, 0xd7, 0xf6, 0x15, 0x34, 0x53, 0x72, 0x91, + 0xb0, 0xcf, 0xee, 0x0d, 0x2c, 0x4b, 0x6a, 0x89, + 0xa8, 0xc7, 0xe6, 0x05, 0x24, 0x43, 0x62, 0x81, + 0xa0, 0xbf, 0xde, 0xfd, 0x1c, 0x3b, 0x5a, 0x79, + 0x98, 0xb7, 0xd6, 0xf5, 0x14, 0x33, 0x52, 0x71, + 0x90, 0xaf, 0xce, 0xed, 0x0c, 0x2b, 0x4a, 0x69, + 0x88, 0xa7, 0xc6, 0xe5, 0x04, 0x23, 0x42, 0x61, + 0x80, 0x9f, 0xbe, 0xdd, 0xfc, 0x1b, 0x3a, 0x59, + 0x78, 0x97, 0xb6, 0xd5, 0xf4, 0x13, 0x32, 0x51, + 0x70, 0x8f, 0xae, 0xcd, 0xec, 0x0b, 0x2a, 0x49, + 0x68, 0x87, 0xa6, 0xc5, 0xe4, 0x03, 0x22, 0x41, + 0x60, 0x7f, 0x9e, 0xbd, 0xdc, 0xfb, 0x1a, 0x39, + 0x58, 0x77, 0x96, 0xb5, 0xd4, 0xf3, 0x12, 0x31, + 0x50, 0x6f, 0x8e, 0xad, 0xcc, 0xeb, 0x0a, 0x29, + 0x48, 0x67, 0x86, 0xa5, 0xc4, 0xe3, 0x02, 0x21, + 0x40, 0x5f, 0x7e, 0x9d, 0xbc, 0xdb, 0xfa, 0x19, + 0x38, 0x57, 0x76, 0x95, 0xb4, 0xd3, 0xf2, 0x11, + 0x30, 0x4f, 0x6e, 0x8d, 0xac, 0xcb, 0xea, 0x09, + 0x28, 0x47, 0x66, 0x85, 0xa4, 0xc3, 0xe2, 0x01, + 0x20, 0x3f, 0x5e, 0x7d, 0x9c, 0xbb, 0xda, 0xf9, + 0x18, 0x37, 0x56, 0x75, 0x94, 0xb3, 0xd2, 0xf1, + 0x10, 0x2f, 0x4e, 0x6d, 0x8c, 0xab, 0xca, 0xe9, + 0x08, 0x27, 0x46, 0x65, 0x84, 0xa3, 0xc2, 0xe1, + 0x00, 0x21, 0x42, 0x63, + }, + .ilen = 4100, + .result = { + 0xb5, 0x81, 0xf5, 0x64, 0x18, 0x73, 0xe3, 0xf0, + 0x4c, 0x13, 0xf2, 0x77, 0x18, 0x60, 0x65, 0x5e, + 0x29, 0x01, 0xce, 0x98, 0x55, 0x53, 0xf9, 0x0c, + 0x2a, 0x08, 0xd5, 0x09, 0xb3, 0x57, 0x55, 0x56, + 0xc5, 0xe9, 0x56, 0x90, 0xcb, 0x6a, 0xa3, 0xc0, + 0xff, 0xc4, 0x79, 0xb4, 0xd2, 0x97, 0x5d, 0xc4, + 0x43, 0xd1, 0xfe, 0x94, 0x7b, 0x88, 0x06, 0x5a, + 0xb2, 0x9e, 0x2c, 0xfc, 0x44, 0x03, 0xb7, 0x90, + 0xa0, 0xc1, 0xba, 0x6a, 0x33, 0xb8, 0xc7, 0xb2, + 0x9d, 0xe1, 0x12, 0x4f, 0xc0, 0x64, 0xd4, 0x01, + 0xfe, 0x8c, 0x7a, 0x66, 0xf7, 0xe6, 0x5a, 0x91, + 0xbb, 0xde, 0x56, 0x86, 0xab, 0x65, 0x21, 0x30, + 0x00, 0x84, 0x65, 0x24, 0xa5, 0x7d, 0x85, 0xb4, + 0xe3, 0x17, 0xed, 0x3a, 0xb7, 0x6f, 0xb4, 0x0b, + 0x0b, 0xaf, 0x15, 0xae, 0x5a, 0x8f, 0xf2, 0x0c, + 0x2f, 0x27, 0xf4, 0x09, 0xd8, 0xd2, 0x96, 0xb7, + 0x71, 0xf2, 0xc5, 0x99, 0x4d, 0x7e, 0x7f, 0x75, + 0x77, 0x89, 0x30, 0x8b, 0x59, 0xdb, 0xa2, 0xb2, + 0xa0, 0xf3, 0x19, 0x39, 0x2b, 0xc5, 0x7e, 0x3f, + 0x4f, 0xd9, 0xd3, 0x56, 0x28, 0x97, 0x44, 0xdc, + 0xc0, 0x8b, 0x77, 0x24, 0xd9, 0x52, 0xe7, 0xc5, + 0xaf, 0xf6, 0x7d, 0x59, 0xb2, 0x44, 0x05, 0x1d, + 0xb1, 0xb0, 0x11, 0xa5, 0x0f, 0xec, 0x33, 0xe1, + 0x6d, 0x1b, 0x4e, 0x1f, 0xff, 0x57, 0x91, 0xb4, + 0x5b, 0x9a, 0x96, 0xc5, 0x53, 0xbc, 0xae, 0x20, + 0x3c, 0xbb, 0x14, 0xe2, 0xe8, 0x22, 0x33, 0xc1, + 0x5e, 0x76, 0x9e, 0x46, 0x99, 0xf6, 0x2a, 0x15, + 0xc6, 0x97, 0x02, 0xa0, 0x66, 0x43, 0xd1, 0xa6, + 0x31, 0xa6, 0x9f, 0xfb, 0xf4, 0xd3, 0x69, 0xe5, + 0xcd, 0x76, 0x95, 0xb8, 0x7a, 0x82, 0x7f, 0x21, + 0x45, 0xff, 0x3f, 0xce, 0x55, 0xf6, 0x95, 0x10, + 0x08, 0x77, 0x10, 0x43, 0xc6, 0xf3, 0x09, 0xe5, + 0x68, 0xe7, 0x3c, 0xad, 0x00, 0x52, 0x45, 0x0d, + 0xfe, 0x2d, 0xc6, 0xc2, 0x94, 0x8c, 0x12, 0x1d, + 0xe6, 0x25, 0xae, 0x98, 0x12, 0x8e, 0x19, 0x9c, + 0x81, 0x68, 0xb1, 0x11, 0xf6, 0x69, 0xda, 0xe3, + 0x62, 0x08, 0x18, 0x7a, 0x25, 0x49, 0x28, 0xac, + 0xba, 0x71, 0x12, 0x0b, 0xe4, 0xa2, 0xe5, 0xc7, + 0x5d, 0x8e, 0xec, 0x49, 0x40, 0x21, 0xbf, 0x5a, + 0x98, 0xf3, 0x02, 0x68, 0x55, 0x03, 0x7f, 0x8a, + 0xe5, 0x94, 0x0c, 0x32, 0x5c, 0x07, 0x82, 0x63, + 0xaf, 0x6f, 0x91, 0x40, 0x84, 0x8e, 0x52, 0x25, + 0xd0, 0xb0, 0x29, 0x53, 0x05, 0xe2, 0x50, 0x7a, + 0x34, 0xeb, 0xc9, 0x46, 0x20, 0xa8, 0x3d, 0xde, + 0x7f, 0x16, 0x5f, 0x36, 0xc5, 0x2e, 0xdc, 0xd1, + 0x15, 0x47, 0xc7, 0x50, 0x40, 0x6d, 0x91, 0xc5, + 0xe7, 0x93, 0x95, 0x1a, 0xd3, 0x57, 0xbc, 0x52, + 0x33, 0xee, 0x14, 0x19, 0x22, 0x52, 0x89, 0xa7, + 0x4a, 0x25, 0x56, 0x77, 0x4b, 0xca, 0xcf, 0x0a, + 0xe1, 0xf5, 0x35, 0x85, 0x30, 0x7e, 0x59, 0x4a, + 0xbd, 0x14, 0x5b, 0xdf, 0xe3, 0x46, 0xcb, 0xac, + 0x1f, 0x6c, 0x96, 0x0e, 0xf4, 0x81, 0xd1, 0x99, + 0xca, 0x88, 0x63, 0x3d, 0x02, 0x58, 0x6b, 0xa9, + 0xe5, 0x9f, 0xb3, 0x00, 0xb2, 0x54, 0xc6, 0x74, + 0x1c, 0xbf, 0x46, 0xab, 0x97, 0xcc, 0xf8, 0x54, + 0x04, 0x07, 0x08, 0x52, 0xe6, 0xc0, 0xda, 0x93, + 0x74, 0x7d, 0x93, 0x99, 0x5d, 0x78, 0x68, 0xa6, + 0x2e, 0x6b, 0xd3, 0x6a, 0x69, 0xcc, 0x12, 0x6b, + 0xd4, 0xc7, 0xa5, 0xc6, 0xe7, 0xf6, 0x03, 0x04, + 0x5d, 0xcd, 0x61, 0x5e, 0x17, 0x40, 0xdc, 0xd1, + 0x5c, 0xf5, 0x08, 0xdf, 0x5c, 0x90, 0x85, 0xa4, + 0xaf, 0xf6, 0x78, 0xbb, 0x0d, 0xf1, 0xf4, 0xa4, + 0x54, 0x26, 0x72, 0x9e, 0x61, 0xfa, 0x86, 0xcf, + 0xe8, 0x9e, 0xa1, 0xe0, 0xc7, 0x48, 0x23, 0xae, + 0x5a, 0x90, 0xae, 0x75, 0x0a, 0x74, 0x18, 0x89, + 0x05, 0xb1, 0x92, 0xb2, 0x7f, 0xd0, 0x1b, 0xa6, + 0x62, 0x07, 0x25, 0x01, 0xc7, 0xc2, 0x4f, 0xf9, + 0xe8, 0xfe, 0x63, 0x95, 0x80, 0x07, 0xb4, 0x26, + 0xcc, 0xd1, 0x26, 0xb6, 0xc4, 0x3f, 0x9e, 0xcb, + 0x8e, 0x3b, 0x2e, 0x44, 0x16, 0xd3, 0x10, 0x9a, + 0x95, 0x08, 0xeb, 0xc8, 0xcb, 0xeb, 0xbf, 0x6f, + 0x0b, 0xcd, 0x1f, 0xc8, 0xca, 0x86, 0xaa, 0xec, + 0x33, 0xe6, 0x69, 0xf4, 0x45, 0x25, 0x86, 0x3a, + 0x22, 0x94, 0x4f, 0x00, 0x23, 0x6a, 0x44, 0xc2, + 0x49, 0x97, 0x33, 0xab, 0x36, 0x14, 0x0a, 0x70, + 0x24, 0xc3, 0xbe, 0x04, 0x3b, 0x79, 0xa0, 0xf9, + 0xb8, 0xe7, 0x76, 0x29, 0x22, 0x83, 0xd7, 0xf2, + 0x94, 0xf4, 0x41, 0x49, 0xba, 0x5f, 0x7b, 0x07, + 0xb5, 0xfb, 0xdb, 0x03, 0x1a, 0x9f, 0xb6, 0x4c, + 0xc2, 0x2e, 0x37, 0x40, 0x49, 0xc3, 0x38, 0x16, + 0xe2, 0x4f, 0x77, 0x82, 0xb0, 0x68, 0x4c, 0x71, + 0x1d, 0x57, 0x61, 0x9c, 0xd9, 0x4e, 0x54, 0x99, + 0x47, 0x13, 0x28, 0x73, 0x3c, 0xbb, 0x00, 0x90, + 0xf3, 0x4d, 0xc9, 0x0e, 0xfd, 0xe7, 0xb1, 0x71, + 0xd3, 0x15, 0x79, 0xbf, 0xcc, 0x26, 0x2f, 0xbd, + 0xad, 0x6c, 0x50, 0x69, 0x6c, 0x3e, 0x6d, 0x80, + 0x9a, 0xea, 0x78, 0xaf, 0x19, 0xb2, 0x0d, 0x4d, + 0xad, 0x04, 0x07, 0xae, 0x22, 0x90, 0x4a, 0x93, + 0x32, 0x0e, 0x36, 0x9b, 0x1b, 0x46, 0xba, 0x3b, + 0xb4, 0xac, 0xc6, 0xd1, 0xa2, 0x31, 0x53, 0x3b, + 0x2a, 0x3d, 0x45, 0xfe, 0x03, 0x61, 0x10, 0x85, + 0x17, 0x69, 0xa6, 0x78, 0xcc, 0x6c, 0x87, 0x49, + 0x53, 0xf9, 0x80, 0x10, 0xde, 0x80, 0xa2, 0x41, + 0x6a, 0xc3, 0x32, 0x02, 0xad, 0x6d, 0x3c, 0x56, + 0x00, 0x71, 0x51, 0x06, 0xa7, 0xbd, 0xfb, 0xef, + 0x3c, 0xb5, 0x9f, 0xfc, 0x48, 0x7d, 0x53, 0x7c, + 0x66, 0xb0, 0x49, 0x23, 0xc4, 0x47, 0x10, 0x0e, + 0xe5, 0x6c, 0x74, 0x13, 0xe6, 0xc5, 0x3f, 0xaa, + 0xde, 0xff, 0x07, 0x44, 0xdd, 0x56, 0x1b, 0xad, + 0x09, 0x77, 0xfb, 0x5b, 0x12, 0xb8, 0x0d, 0x38, + 0x17, 0x37, 0x35, 0x7b, 0x9b, 0xbc, 0xfe, 0xd4, + 0x7e, 0x8b, 0xda, 0x7e, 0x5b, 0x04, 0xa7, 0x22, + 0xa7, 0x31, 0xa1, 0x20, 0x86, 0xc7, 0x1b, 0x99, + 0xdb, 0xd1, 0x89, 0xf4, 0x94, 0xa3, 0x53, 0x69, + 0x8d, 0xe7, 0xe8, 0x74, 0x11, 0x8d, 0x74, 0xd6, + 0x07, 0x37, 0x91, 0x9f, 0xfd, 0x67, 0x50, 0x3a, + 0xc9, 0xe1, 0xf4, 0x36, 0xd5, 0xa0, 0x47, 0xd1, + 0xf9, 0xe5, 0x39, 0xa3, 0x31, 0xac, 0x07, 0x36, + 0x23, 0xf8, 0x66, 0x18, 0x14, 0x28, 0x34, 0x0f, + 0xb8, 0xd0, 0xe7, 0x29, 0xb3, 0x04, 0x4b, 0x55, + 0x01, 0x41, 0xb2, 0x75, 0x8d, 0xcb, 0x96, 0x85, + 0x3a, 0xfb, 0xab, 0x2b, 0x9e, 0xfa, 0x58, 0x20, + 0x44, 0x1f, 0xc0, 0x14, 0x22, 0x75, 0x61, 0xe8, + 0xaa, 0x19, 0xcf, 0xf1, 0x82, 0x56, 0xf4, 0xd7, + 0x78, 0x7b, 0x3d, 0x5f, 0xb3, 0x9e, 0x0b, 0x8a, + 0x57, 0x50, 0xdb, 0x17, 0x41, 0x65, 0x4d, 0xa3, + 0x02, 0xc9, 0x9c, 0x9c, 0x53, 0xfb, 0x39, 0x39, + 0x9b, 0x1d, 0x72, 0x24, 0xda, 0xb7, 0x39, 0xbe, + 0x13, 0x3b, 0xfa, 0x29, 0xda, 0x9e, 0x54, 0x64, + 0x6e, 0xba, 0xd8, 0xa1, 0xcb, 0xb3, 0x36, 0xfa, + 0xcb, 0x47, 0x85, 0xe9, 0x61, 0x38, 0xbc, 0xbe, + 0xc5, 0x00, 0x38, 0x2a, 0x54, 0xf7, 0xc4, 0xb9, + 0xb3, 0xd3, 0x7b, 0xa0, 0xa0, 0xf8, 0x72, 0x7f, + 0x8c, 0x8e, 0x82, 0x0e, 0xc6, 0x1c, 0x75, 0x9d, + 0xca, 0x8e, 0x61, 0x87, 0xde, 0xad, 0x80, 0xd2, + 0xf5, 0xf9, 0x80, 0xef, 0x15, 0x75, 0xaf, 0xf5, + 0x80, 0xfb, 0xff, 0x6d, 0x1e, 0x25, 0xb7, 0x40, + 0x61, 0x6a, 0x39, 0x5a, 0x6a, 0xb5, 0x31, 0xab, + 0x97, 0x8a, 0x19, 0x89, 0x44, 0x40, 0xc0, 0xa6, + 0xb4, 0x4e, 0x30, 0x32, 0x7b, 0x13, 0xe7, 0x67, + 0xa9, 0x8b, 0x57, 0x04, 0xc2, 0x01, 0xa6, 0xf4, + 0x28, 0x99, 0xad, 0x2c, 0x76, 0xa3, 0x78, 0xc2, + 0x4a, 0xe6, 0xca, 0x5c, 0x50, 0x6a, 0xc1, 0xb0, + 0x62, 0x4b, 0x10, 0x8e, 0x7c, 0x17, 0x43, 0xb3, + 0x17, 0x66, 0x1c, 0x3e, 0x8d, 0x69, 0xf0, 0x5a, + 0x71, 0xf5, 0x97, 0xdc, 0xd1, 0x45, 0xdd, 0x28, + 0xf3, 0x5d, 0xdf, 0x53, 0x7b, 0x11, 0xe5, 0xbc, + 0x4c, 0xdb, 0x1b, 0x51, 0x6b, 0xe9, 0xfb, 0x3d, + 0xc1, 0xc3, 0x2c, 0xb9, 0x71, 0xf5, 0xb6, 0xb2, + 0x13, 0x36, 0x79, 0x80, 0x53, 0xe8, 0xd3, 0xa6, + 0x0a, 0xaf, 0xfd, 0x56, 0x97, 0xf7, 0x40, 0x8e, + 0x45, 0xce, 0xf8, 0xb0, 0x9e, 0x5c, 0x33, 0x82, + 0xb0, 0x44, 0x56, 0xfc, 0x05, 0x09, 0xe9, 0x2a, + 0xac, 0x26, 0x80, 0x14, 0x1d, 0xc8, 0x3a, 0x35, + 0x4c, 0x82, 0x97, 0xfd, 0x76, 0xb7, 0xa9, 0x0a, + 0x35, 0x58, 0x79, 0x8e, 0x0f, 0x66, 0xea, 0xaf, + 0x51, 0x6c, 0x09, 0xa9, 0x6e, 0x9b, 0xcb, 0x9a, + 0x31, 0x47, 0xa0, 0x2f, 0x7c, 0x71, 0xb4, 0x4a, + 0x11, 0xaa, 0x8c, 0x66, 0xc5, 0x64, 0xe6, 0x3a, + 0x54, 0xda, 0x24, 0x6a, 0xc4, 0x41, 0x65, 0x46, + 0x82, 0xa0, 0x0a, 0x0f, 0x5f, 0xfb, 0x25, 0xd0, + 0x2c, 0x91, 0xa7, 0xee, 0xc4, 0x81, 0x07, 0x86, + 0x75, 0x5e, 0x33, 0x69, 0x97, 0xe4, 0x2c, 0xa8, + 0x9d, 0x9f, 0x0b, 0x6a, 0xbe, 0xad, 0x98, 0xda, + 0x6d, 0x94, 0x41, 0xda, 0x2c, 0x1e, 0x89, 0xc4, + 0xc2, 0xaf, 0x1e, 0x00, 0x05, 0x0b, 0x83, 0x60, + 0xbd, 0x43, 0xea, 0x15, 0x23, 0x7f, 0xb9, 0xac, + 0xee, 0x4f, 0x2c, 0xaf, 0x2a, 0xf3, 0xdf, 0xd0, + 0xf3, 0x19, 0x31, 0xbb, 0x4a, 0x74, 0x84, 0x17, + 0x52, 0x32, 0x2c, 0x7d, 0x61, 0xe4, 0xcb, 0xeb, + 0x80, 0x38, 0x15, 0x52, 0xcb, 0x6f, 0xea, 0xe5, + 0x73, 0x9c, 0xd9, 0x24, 0x69, 0xc6, 0x95, 0x32, + 0x21, 0xc8, 0x11, 0xe4, 0xdc, 0x36, 0xd7, 0x93, + 0x38, 0x66, 0xfb, 0xb2, 0x7f, 0x3a, 0xb9, 0xaf, + 0x31, 0xdd, 0x93, 0x75, 0x78, 0x8a, 0x2c, 0x94, + 0x87, 0x1a, 0x58, 0xec, 0x9e, 0x7d, 0x4d, 0xba, + 0xe1, 0xe5, 0x4d, 0xfc, 0xbc, 0xa4, 0x2a, 0x14, + 0xef, 0xcc, 0xa7, 0xec, 0xab, 0x43, 0x09, 0x18, + 0xd3, 0xab, 0x68, 0xd1, 0x07, 0x99, 0x44, 0x47, + 0xd6, 0x83, 0x85, 0x3b, 0x30, 0xea, 0xa9, 0x6b, + 0x63, 0xea, 0xc4, 0x07, 0xfb, 0x43, 0x2f, 0xa4, + 0xaa, 0xb0, 0xab, 0x03, 0x89, 0xce, 0x3f, 0x8c, + 0x02, 0x7c, 0x86, 0x54, 0xbc, 0x88, 0xaf, 0x75, + 0xd2, 0xdc, 0x63, 0x17, 0xd3, 0x26, 0xf6, 0x96, + 0xa9, 0x3c, 0xf1, 0x61, 0x8c, 0x11, 0x18, 0xcc, + 0xd6, 0xea, 0x5b, 0xe2, 0xcd, 0xf0, 0xf1, 0xb2, + 0xe5, 0x35, 0x90, 0x1f, 0x85, 0x4c, 0x76, 0x5b, + 0x66, 0xce, 0x44, 0xa4, 0x32, 0x9f, 0xe6, 0x7b, + 0x71, 0x6e, 0x9f, 0x58, 0x15, 0x67, 0x72, 0x87, + 0x64, 0x8e, 0x3a, 0x44, 0x45, 0xd4, 0x76, 0xfa, + 0xc2, 0xf6, 0xef, 0x85, 0x05, 0x18, 0x7a, 0x9b, + 0xba, 0x41, 0x54, 0xac, 0xf0, 0xfc, 0x59, 0x12, + 0x3f, 0xdf, 0xa0, 0xe5, 0x8a, 0x65, 0xfd, 0x3a, + 0x62, 0x8d, 0x83, 0x2c, 0x03, 0xbe, 0x05, 0x76, + 0x2e, 0x53, 0x49, 0x97, 0x94, 0x33, 0xae, 0x40, + 0x81, 0x15, 0xdb, 0x6e, 0xad, 0xaa, 0xf5, 0x4b, + 0xe3, 0x98, 0x70, 0xdf, 0xe0, 0x7c, 0xcd, 0xdb, + 0x02, 0xd4, 0x7d, 0x2f, 0xc1, 0xe6, 0xb4, 0xf3, + 0xd7, 0x0d, 0x7a, 0xd9, 0x23, 0x9e, 0x87, 0x2d, + 0xce, 0x87, 0xad, 0xcc, 0x72, 0x05, 0x00, 0x29, + 0xdc, 0x73, 0x7f, 0x64, 0xc1, 0x15, 0x0e, 0xc2, + 0xdf, 0xa7, 0x5f, 0xeb, 0x41, 0xa1, 0xcd, 0xef, + 0x5c, 0x50, 0x79, 0x2a, 0x56, 0x56, 0x71, 0x8c, + 0xac, 0xc0, 0x79, 0x50, 0x69, 0xca, 0x59, 0x32, + 0x65, 0xf2, 0x54, 0xe4, 0x52, 0x38, 0x76, 0xd1, + 0x5e, 0xde, 0x26, 0x9e, 0xfb, 0x75, 0x2e, 0x11, + 0xb5, 0x10, 0xf4, 0x17, 0x73, 0xf5, 0x89, 0xc7, + 0x4f, 0x43, 0x5c, 0x8e, 0x7c, 0xb9, 0x05, 0x52, + 0x24, 0x40, 0x99, 0xfe, 0x9b, 0x85, 0x0b, 0x6c, + 0x22, 0x3e, 0x8b, 0xae, 0x86, 0xa1, 0xd2, 0x79, + 0x05, 0x68, 0x6b, 0xab, 0xe3, 0x41, 0x49, 0xed, + 0x15, 0xa1, 0x8d, 0x40, 0x2d, 0x61, 0xdf, 0x1a, + 0x59, 0xc9, 0x26, 0x8b, 0xef, 0x30, 0x4c, 0x88, + 0x4b, 0x10, 0xf8, 0x8d, 0xa6, 0x92, 0x9f, 0x4b, + 0xf3, 0xc4, 0x53, 0x0b, 0x89, 0x5d, 0x28, 0x92, + 0xcf, 0x78, 0xb2, 0xc0, 0x5d, 0xed, 0x7e, 0xfc, + 0xc0, 0x12, 0x23, 0x5f, 0x5a, 0x78, 0x86, 0x43, + 0x6e, 0x27, 0xf7, 0x5a, 0xa7, 0x6a, 0xed, 0x19, + 0x04, 0xf0, 0xb3, 0x12, 0xd1, 0xbd, 0x0e, 0x89, + 0x6e, 0xbc, 0x96, 0xa8, 0xd8, 0x49, 0x39, 0x9f, + 0x7e, 0x67, 0xf0, 0x2e, 0x3e, 0x01, 0xa9, 0xba, + 0xec, 0x8b, 0x62, 0x8e, 0xcb, 0x4a, 0x70, 0x43, + 0xc7, 0xc2, 0xc4, 0xca, 0x82, 0x03, 0x73, 0xe9, + 0x11, 0xdf, 0xcf, 0x54, 0xea, 0xc9, 0xb0, 0x95, + 0x51, 0xc0, 0x13, 0x3d, 0x92, 0x05, 0xfa, 0xf4, + 0xa9, 0x34, 0xc8, 0xce, 0x6c, 0x3d, 0x54, 0xcc, + 0xc4, 0xaf, 0xf1, 0xdc, 0x11, 0x44, 0x26, 0xa2, + 0xaf, 0xf1, 0x85, 0x75, 0x7d, 0x03, 0x61, 0x68, + 0x4e, 0x78, 0xc6, 0x92, 0x7d, 0x86, 0x7d, 0x77, + 0xdc, 0x71, 0x72, 0xdb, 0xc6, 0xae, 0xa1, 0xcb, + 0x70, 0x9a, 0x0b, 0x19, 0xbe, 0x4a, 0x6c, 0x2a, + 0xe2, 0xba, 0x6c, 0x64, 0x9a, 0x13, 0x28, 0xdf, + 0x85, 0x75, 0xe6, 0x43, 0xf6, 0x87, 0x08, 0x68, + 0x6e, 0xba, 0x6e, 0x79, 0x9f, 0x04, 0xbc, 0x23, + 0x50, 0xf6, 0x33, 0x5c, 0x1f, 0x24, 0x25, 0xbe, + 0x33, 0x47, 0x80, 0x45, 0x56, 0xa3, 0xa7, 0xd7, + 0x7a, 0xb1, 0x34, 0x0b, 0x90, 0x3c, 0x9c, 0xad, + 0x44, 0x5f, 0x9e, 0x0e, 0x9d, 0xd4, 0xbd, 0x93, + 0x5e, 0xfa, 0x3c, 0xe0, 0xb0, 0xd9, 0xed, 0xf3, + 0xd6, 0x2e, 0xff, 0x24, 0xd8, 0x71, 0x6c, 0xed, + 0xaf, 0x55, 0xeb, 0x22, 0xac, 0x93, 0x68, 0x32, + 0x05, 0x5b, 0x47, 0xdd, 0xc6, 0x4a, 0xcb, 0xc7, + 0x10, 0xe1, 0x3c, 0x92, 0x1a, 0xf3, 0x23, 0x78, + 0x2b, 0xa1, 0xd2, 0x80, 0xf4, 0x12, 0xb1, 0x20, + 0x8f, 0xff, 0x26, 0x35, 0xdd, 0xfb, 0xc7, 0x4e, + 0x78, 0xf1, 0x2d, 0x50, 0x12, 0x77, 0xa8, 0x60, + 0x7c, 0x0f, 0xf5, 0x16, 0x2f, 0x63, 0x70, 0x2a, + 0xc0, 0x96, 0x80, 0x4e, 0x0a, 0xb4, 0x93, 0x35, + 0x5d, 0x1d, 0x3f, 0x56, 0xf7, 0x2f, 0xbb, 0x90, + 0x11, 0x16, 0x8f, 0xa2, 0xec, 0x47, 0xbe, 0xac, + 0x56, 0x01, 0x26, 0x56, 0xb1, 0x8c, 0xb2, 0x10, + 0xf9, 0x1a, 0xca, 0xf5, 0xd1, 0xb7, 0x39, 0x20, + 0x63, 0xf1, 0x69, 0x20, 0x4f, 0x13, 0x12, 0x1f, + 0x5b, 0x65, 0xfc, 0x98, 0xf7, 0xc4, 0x7a, 0xbe, + 0xf7, 0x26, 0x4d, 0x2b, 0x84, 0x7b, 0x42, 0xad, + 0xd8, 0x7a, 0x0a, 0xb4, 0xd8, 0x74, 0xbf, 0xc1, + 0xf0, 0x6e, 0xb4, 0x29, 0xa3, 0xbb, 0xca, 0x46, + 0x67, 0x70, 0x6a, 0x2d, 0xce, 0x0e, 0xa2, 0x8a, + 0xa9, 0x87, 0xbf, 0x05, 0xc4, 0xc1, 0x04, 0xa3, + 0xab, 0xd4, 0x45, 0x43, 0x8c, 0xb6, 0x02, 0xb0, + 0x41, 0xc8, 0xfc, 0x44, 0x3d, 0x59, 0xaa, 0x2e, + 0x44, 0x21, 0x2a, 0x8d, 0x88, 0x9d, 0x57, 0xf4, + 0xa0, 0x02, 0x77, 0xb8, 0xa6, 0xa0, 0xe6, 0x75, + 0x5c, 0x82, 0x65, 0x3e, 0x03, 0x5c, 0x29, 0x8f, + 0x38, 0x55, 0xab, 0x33, 0x26, 0xef, 0x9f, 0x43, + 0x52, 0xfd, 0x68, 0xaf, 0x36, 0xb4, 0xbb, 0x9a, + 0x58, 0x09, 0x09, 0x1b, 0xc3, 0x65, 0x46, 0x46, + 0x1d, 0xa7, 0x94, 0x18, 0x23, 0x50, 0x2c, 0xca, + 0x2c, 0x55, 0x19, 0x97, 0x01, 0x9d, 0x93, 0x3b, + 0x63, 0x86, 0xf2, 0x03, 0x67, 0x45, 0xd2, 0x72, + 0x28, 0x52, 0x6c, 0xf4, 0xe3, 0x1c, 0xb5, 0x11, + 0x13, 0xf1, 0xeb, 0x21, 0xc7, 0xd9, 0x56, 0x82, + 0x2b, 0x82, 0x39, 0xbd, 0x69, 0x54, 0xed, 0x62, + 0xc3, 0xe2, 0xde, 0x73, 0xd4, 0x6a, 0x12, 0xae, + 0x13, 0x21, 0x7f, 0x4b, 0x5b, 0xfc, 0xbf, 0xe8, + 0x2b, 0xbe, 0x56, 0xba, 0x68, 0x8b, 0x9a, 0xb1, + 0x6e, 0xfa, 0xbf, 0x7e, 0x5a, 0x4b, 0xf1, 0xac, + 0x98, 0x65, 0x85, 0xd1, 0x93, 0x53, 0xd3, 0x7b, + 0x09, 0xdd, 0x4b, 0x10, 0x6d, 0x84, 0xb0, 0x13, + 0x65, 0xbd, 0xcf, 0x52, 0x09, 0xc4, 0x85, 0xe2, + 0x84, 0x74, 0x15, 0x65, 0xb7, 0xf7, 0x51, 0xaf, + 0x55, 0xad, 0xa4, 0xd1, 0x22, 0x54, 0x70, 0x94, + 0xa0, 0x1c, 0x90, 0x41, 0xfd, 0x99, 0xd7, 0x5a, + 0x31, 0xef, 0xaa, 0x25, 0xd0, 0x7f, 0x4f, 0xea, + 0x1d, 0x55, 0x42, 0xe5, 0x49, 0xb0, 0xd0, 0x46, + 0x62, 0x36, 0x43, 0xb2, 0x82, 0x15, 0x75, 0x50, + 0xa4, 0x72, 0xeb, 0x54, 0x27, 0x1f, 0x8a, 0xe4, + 0x7d, 0xe9, 0x66, 0xc5, 0xf1, 0x53, 0xa4, 0xd1, + 0x0c, 0xeb, 0xb8, 0xf8, 0xbc, 0xd4, 0xe2, 0xe7, + 0xe1, 0xf8, 0x4b, 0xcb, 0xa9, 0xa1, 0xaf, 0x15, + 0x83, 0xcb, 0x72, 0xd0, 0x33, 0x79, 0x00, 0x2d, + 0x9f, 0xd7, 0xf1, 0x2e, 0x1e, 0x10, 0xe4, 0x45, + 0xc0, 0x75, 0x3a, 0x39, 0xea, 0x68, 0xf7, 0x5d, + 0x1b, 0x73, 0x8f, 0xe9, 0x8e, 0x0f, 0x72, 0x47, + 0xae, 0x35, 0x0a, 0x31, 0x7a, 0x14, 0x4d, 0x4a, + 0x6f, 0x47, 0xf7, 0x7e, 0x91, 0x6e, 0x74, 0x8b, + 0x26, 0x47, 0xf9, 0xc3, 0xf9, 0xde, 0x70, 0xf5, + 0x61, 0xab, 0xa9, 0x27, 0x9f, 0x82, 0xe4, 0x9c, + 0x89, 0x91, 0x3f, 0x2e, 0x6a, 0xfd, 0xb5, 0x49, + 0xe9, 0xfd, 0x59, 0x14, 0x36, 0x49, 0x40, 0x6d, + 0x32, 0xd8, 0x85, 0x42, 0xf3, 0xa5, 0xdf, 0x0c, + 0xa8, 0x27, 0xd7, 0x54, 0xe2, 0x63, 0x2f, 0xf2, + 0x7e, 0x8b, 0x8b, 0xe7, 0xf1, 0x9a, 0x95, 0x35, + 0x43, 0xdc, 0x3a, 0xe4, 0xb6, 0xf4, 0xd0, 0xdf, + 0x9c, 0xcb, 0x94, 0xf3, 0x21, 0xa0, 0x77, 0x50, + 0xe2, 0xc6, 0xc4, 0xc6, 0x5f, 0x09, 0x64, 0x5b, + 0x92, 0x90, 0xd8, 0xe1, 0xd1, 0xed, 0x4b, 0x42, + 0xd7, 0x37, 0xaf, 0x65, 0x3d, 0x11, 0x39, 0xb6, + 0x24, 0x8a, 0x60, 0xae, 0xd6, 0x1e, 0xbf, 0x0e, + 0x0d, 0xd7, 0xdc, 0x96, 0x0e, 0x65, 0x75, 0x4e, + 0x29, 0x06, 0x9d, 0xa4, 0x51, 0x3a, 0x10, 0x63, + 0x8f, 0x17, 0x07, 0xd5, 0x8e, 0x3c, 0xf4, 0x28, + 0x00, 0x5a, 0x5b, 0x05, 0x19, 0xd8, 0xc0, 0x6c, + 0xe5, 0x15, 0xe4, 0x9c, 0x9d, 0x71, 0x9d, 0x5e, + 0x94, 0x29, 0x1a, 0xa7, 0x80, 0xfa, 0x0e, 0x33, + 0x03, 0xdd, 0xb7, 0x3e, 0x9a, 0xa9, 0x26, 0x18, + 0x37, 0xa9, 0x64, 0x08, 0x4d, 0x94, 0x5a, 0x88, + 0xca, 0x35, 0xce, 0x81, 0x02, 0xe3, 0x1f, 0x1b, + 0x89, 0x1a, 0x77, 0x85, 0xe3, 0x41, 0x6d, 0x32, + 0x42, 0x19, 0x23, 0x7d, 0xc8, 0x73, 0xee, 0x25, + 0x85, 0x0d, 0xf8, 0x31, 0x25, 0x79, 0x1b, 0x6f, + 0x79, 0x25, 0xd2, 0xd8, 0xd4, 0x23, 0xfd, 0xf7, + 0x82, 0x36, 0x6a, 0x0c, 0x46, 0x22, 0x15, 0xe9, + 0xff, 0x72, 0x41, 0x91, 0x91, 0x7d, 0x3a, 0xb7, + 0xdd, 0x65, 0x99, 0x70, 0xf6, 0x8d, 0x84, 0xf8, + 0x67, 0x15, 0x20, 0x11, 0xd6, 0xb2, 0x55, 0x7b, + 0xdb, 0x87, 0xee, 0xef, 0x55, 0x89, 0x2a, 0x59, + 0x2b, 0x07, 0x8f, 0x43, 0x8a, 0x59, 0x3c, 0x01, + 0x8b, 0x65, 0x54, 0xa1, 0x66, 0xd5, 0x38, 0xbd, + 0xc6, 0x30, 0xa9, 0xcc, 0x49, 0xb6, 0xa8, 0x1b, + 0xb8, 0xc0, 0x0e, 0xe3, 0x45, 0x28, 0xe2, 0xff, + 0x41, 0x9f, 0x7e, 0x7c, 0xd1, 0xae, 0x9e, 0x25, + 0x3f, 0x4c, 0x7c, 0x7c, 0xf4, 0xa8, 0x26, 0x4d, + 0x5c, 0xfd, 0x4b, 0x27, 0x18, 0xf9, 0x61, 0x76, + 0x48, 0xba, 0x0c, 0x6b, 0xa9, 0x4d, 0xfc, 0xf5, + 0x3b, 0x35, 0x7e, 0x2f, 0x4a, 0xa9, 0xc2, 0x9a, + 0xae, 0xab, 0x86, 0x09, 0x89, 0xc9, 0xc2, 0x40, + 0x39, 0x2c, 0x81, 0xb3, 0xb8, 0x17, 0x67, 0xc2, + 0x0d, 0x32, 0x4a, 0x3a, 0x67, 0x81, 0xd7, 0x1a, + 0x34, 0x52, 0xc5, 0xdb, 0x0a, 0xf5, 0x63, 0x39, + 0xea, 0x1f, 0xe1, 0x7c, 0xa1, 0x9e, 0xc1, 0x35, + 0xe3, 0xb1, 0x18, 0x45, 0x67, 0xf9, 0x22, 0x38, + 0x95, 0xd9, 0x34, 0x34, 0x86, 0xc6, 0x41, 0x94, + 0x15, 0xf9, 0x5b, 0x41, 0xa6, 0x87, 0x8b, 0xf8, + 0xd5, 0xe1, 0x1b, 0xe2, 0x5b, 0xf3, 0x86, 0x10, + 0xff, 0xe6, 0xae, 0x69, 0x76, 0xbc, 0x0d, 0xb4, + 0x09, 0x90, 0x0c, 0xa2, 0x65, 0x0c, 0xad, 0x74, + 0xf5, 0xd7, 0xff, 0xda, 0xc1, 0xce, 0x85, 0xbe, + 0x00, 0xa7, 0xff, 0x4d, 0x2f, 0x65, 0xd3, 0x8c, + 0x86, 0x2d, 0x05, 0xe8, 0xed, 0x3e, 0x6b, 0x8b, + 0x0f, 0x3d, 0x83, 0x8c, 0xf1, 0x1d, 0x5b, 0x96, + 0x2e, 0xb1, 0x9c, 0xc2, 0x98, 0xe1, 0x70, 0xb9, + 0xba, 0x5c, 0x8a, 0x43, 0xd6, 0x34, 0xa7, 0x2d, + 0xc9, 0x92, 0xae, 0xf2, 0xa5, 0x7b, 0x05, 0x49, + 0xa7, 0x33, 0x34, 0x86, 0xca, 0xe4, 0x96, 0x23, + 0x76, 0x5b, 0xf2, 0xc6, 0xf1, 0x51, 0x28, 0x42, + 0x7b, 0xcc, 0x76, 0x8f, 0xfa, 0xa2, 0xad, 0x31, + 0xd4, 0xd6, 0x7a, 0x6d, 0x25, 0x25, 0x54, 0xe4, + 0x3f, 0x50, 0x59, 0xe1, 0x5c, 0x05, 0xb7, 0x27, + 0x48, 0xbf, 0x07, 0xec, 0x1b, 0x13, 0xbe, 0x2b, + 0xa1, 0x57, 0x2b, 0xd5, 0xab, 0xd7, 0xd0, 0x4c, + 0x1e, 0xcb, 0x71, 0x9b, 0xc5, 0x90, 0x85, 0xd3, + 0xde, 0x59, 0xec, 0x71, 0xeb, 0x89, 0xbb, 0xd0, + 0x09, 0x50, 0xe1, 0x16, 0x3f, 0xfd, 0x1c, 0x34, + 0xc3, 0x1c, 0xa1, 0x10, 0x77, 0x53, 0x98, 0xef, + 0xf2, 0xfd, 0xa5, 0x01, 0x59, 0xc2, 0x9b, 0x26, + 0xc7, 0x42, 0xd9, 0x49, 0xda, 0x58, 0x2b, 0x6e, + 0x9f, 0x53, 0x19, 0x76, 0x7e, 0xd9, 0xc9, 0x0e, + 0x68, 0xc8, 0x7f, 0x51, 0x22, 0x42, 0xef, 0x49, + 0xa4, 0x55, 0xb6, 0x36, 0xac, 0x09, 0xc7, 0x31, + 0x88, 0x15, 0x4b, 0x2e, 0x8f, 0x3a, 0x08, 0xf7, + 0xd8, 0xf7, 0xa8, 0xc5, 0xa9, 0x33, 0xa6, 0x45, + 0xe4, 0xc4, 0x94, 0x76, 0xf3, 0x0d, 0x8f, 0x7e, + 0xc8, 0xf6, 0xbc, 0x23, 0x0a, 0xb6, 0x4c, 0xd3, + 0x6a, 0xcd, 0x36, 0xc2, 0x90, 0x5c, 0x5c, 0x3c, + 0x65, 0x7b, 0xc2, 0xd6, 0xcc, 0xe6, 0x0d, 0x87, + 0x73, 0x2e, 0x71, 0x79, 0x16, 0x06, 0x63, 0x28, + 0x09, 0x15, 0xd8, 0x89, 0x38, 0x38, 0x3d, 0xb5, + 0x42, 0x1c, 0x08, 0x24, 0xf7, 0x2a, 0xd2, 0x9d, + 0xc8, 0xca, 0xef, 0xf9, 0x27, 0xd8, 0x07, 0x86, + 0xf7, 0x43, 0x0b, 0x55, 0x15, 0x3f, 0x9f, 0x83, + 0xef, 0xdc, 0x49, 0x9d, 0x2a, 0xc1, 0x54, 0x62, + 0xbd, 0x9b, 0x66, 0x55, 0x9f, 0xb7, 0x12, 0xf3, + 0x1b, 0x4d, 0x9d, 0x2a, 0x5c, 0xed, 0x87, 0x75, + 0x87, 0x26, 0xec, 0x61, 0x2c, 0xb4, 0x0f, 0x89, + 0xb0, 0xfb, 0x2e, 0x68, 0x5d, 0x15, 0xc7, 0x8d, + 0x2e, 0xc0, 0xd9, 0xec, 0xaf, 0x4f, 0xd2, 0x25, + 0x29, 0xe8, 0xd2, 0x26, 0x2b, 0x67, 0xe9, 0xfc, + 0x2b, 0xa8, 0x67, 0x96, 0x12, 0x1f, 0x5b, 0x96, + 0xc6, 0x14, 0x53, 0xaf, 0x44, 0xea, 0xd6, 0xe2, + 0x94, 0x98, 0xe4, 0x12, 0x93, 0x4c, 0x92, 0xe0, + 0x18, 0xa5, 0x8d, 0x2d, 0xe4, 0x71, 0x3c, 0x47, + 0x4c, 0xf7, 0xe6, 0x47, 0x9e, 0xc0, 0x68, 0xdf, + 0xd4, 0xf5, 0x5a, 0x74, 0xb1, 0x2b, 0x29, 0x03, + 0x19, 0x07, 0xaf, 0x90, 0x62, 0x5c, 0x68, 0x98, + 0x48, 0x16, 0x11, 0x02, 0x9d, 0xee, 0xb4, 0x9b, + 0xe5, 0x42, 0x7f, 0x08, 0xfd, 0x16, 0x32, 0x0b, + 0xd0, 0xb3, 0xfa, 0x2b, 0xb7, 0x99, 0xf9, 0x29, + 0xcd, 0x20, 0x45, 0x9f, 0xb3, 0x1a, 0x5d, 0xa2, + 0xaf, 0x4d, 0xe0, 0xbd, 0x42, 0x0d, 0xbc, 0x74, + 0x99, 0x9c, 0x8e, 0x53, 0x1a, 0xb4, 0x3e, 0xbd, + 0xa2, 0x9a, 0x2d, 0xf7, 0xf8, 0x39, 0x0f, 0x67, + 0x63, 0xfc, 0x6b, 0xc0, 0xaf, 0xb3, 0x4b, 0x4f, + 0x55, 0xc4, 0xcf, 0xa7, 0xc8, 0x04, 0x11, 0x3e, + 0x14, 0x32, 0xbb, 0x1b, 0x38, 0x77, 0xd6, 0x7f, + 0x54, 0x4c, 0xdf, 0x75, 0xf3, 0x07, 0x2d, 0x33, + 0x9b, 0xa8, 0x20, 0xe1, 0x7b, 0x12, 0xb5, 0xf3, + 0xef, 0x2f, 0xce, 0x72, 0xe5, 0x24, 0x60, 0xc1, + 0x30, 0xe2, 0xab, 0xa1, 0x8e, 0x11, 0x09, 0xa8, + 0x21, 0x33, 0x44, 0xfe, 0x7f, 0x35, 0x32, 0x93, + 0x39, 0xa7, 0xad, 0x8b, 0x79, 0x06, 0xb2, 0xcb, + 0x4e, 0xa9, 0x5f, 0xc7, 0xba, 0x74, 0x29, 0xec, + 0x93, 0xa0, 0x4e, 0x54, 0x93, 0xc0, 0xbc, 0x55, + 0x64, 0xf0, 0x48, 0xe5, 0x57, 0x99, 0xee, 0x75, + 0xd6, 0x79, 0x0f, 0x66, 0xb7, 0xc6, 0x57, 0x76, + 0xf7, 0xb7, 0xf3, 0x9c, 0xc5, 0x60, 0xe8, 0x7f, + 0x83, 0x76, 0xd6, 0x0e, 0xaa, 0xe6, 0x90, 0x39, + 0x1d, 0xa6, 0x32, 0x6a, 0x34, 0xe3, 0x55, 0xf8, + 0x58, 0xa0, 0x58, 0x7d, 0x33, 0xe0, 0x22, 0x39, + 0x44, 0x64, 0x87, 0x86, 0x5a, 0x2f, 0xa7, 0x7e, + 0x0f, 0x38, 0xea, 0xb0, 0x30, 0xcc, 0x61, 0xa5, + 0x6a, 0x32, 0xae, 0x1e, 0xf7, 0xe9, 0xd0, 0xa9, + 0x0c, 0x32, 0x4b, 0xb5, 0x49, 0x28, 0xab, 0x85, + 0x2f, 0x8e, 0x01, 0x36, 0x38, 0x52, 0xd0, 0xba, + 0xd6, 0x02, 0x78, 0xf8, 0x0e, 0x3e, 0x9c, 0x8b, + 0x6b, 0x45, 0x99, 0x3f, 0x5c, 0xfe, 0x58, 0xf1, + 0x5c, 0x94, 0x04, 0xe1, 0xf5, 0x18, 0x6d, 0x51, + 0xb2, 0x5d, 0x18, 0x20, 0xb6, 0xc2, 0x9a, 0x42, + 0x1d, 0xb3, 0xab, 0x3c, 0xb6, 0x3a, 0x13, 0x03, + 0xb2, 0x46, 0x82, 0x4f, 0xfc, 0x64, 0xbc, 0x4f, + 0xca, 0xfa, 0x9c, 0xc0, 0xd5, 0xa7, 0xbd, 0x11, + 0xb7, 0xe4, 0x5a, 0xf6, 0x6f, 0x4d, 0x4d, 0x54, + 0xea, 0xa4, 0x98, 0x66, 0xd4, 0x22, 0x3b, 0xd3, + 0x8f, 0x34, 0x47, 0xd9, 0x7c, 0xf4, 0x72, 0x3b, + 0x4d, 0x02, 0x77, 0xf6, 0xd6, 0xdd, 0x08, 0x0a, + 0x81, 0xe1, 0x86, 0x89, 0x3e, 0x56, 0x10, 0x3c, + 0xba, 0xd7, 0x81, 0x8c, 0x08, 0xbc, 0x8b, 0xe2, + 0x53, 0xec, 0xa7, 0x89, 0xee, 0xc8, 0x56, 0xb5, + 0x36, 0x2c, 0xb2, 0x03, 0xba, 0x99, 0xdd, 0x7c, + 0x48, 0xa0, 0xb0, 0xbc, 0x91, 0x33, 0xe9, 0xa8, + 0xcb, 0xcd, 0xcf, 0x59, 0x5f, 0x1f, 0x15, 0xe2, + 0x56, 0xf5, 0x4e, 0x01, 0x35, 0x27, 0x45, 0x77, + 0x47, 0xc8, 0xbc, 0xcb, 0x7e, 0x39, 0xc1, 0x97, + 0x28, 0xd3, 0x84, 0xfc, 0x2c, 0x3e, 0xc8, 0xad, + 0x9c, 0xf8, 0x8a, 0x61, 0x9c, 0x28, 0xaa, 0xc5, + 0x99, 0x20, 0x43, 0x85, 0x9d, 0xa5, 0xe2, 0x8b, + 0xb8, 0xae, 0xeb, 0xd0, 0x32, 0x0d, 0x52, 0x78, + 0x09, 0x56, 0x3f, 0xc7, 0xd8, 0x7e, 0x26, 0xfc, + 0x37, 0xfb, 0x6f, 0x04, 0xfc, 0xfa, 0x92, 0x10, + 0xac, 0xf8, 0x3e, 0x21, 0xdc, 0x8c, 0x21, 0x16, + 0x7d, 0x67, 0x6e, 0xf6, 0xcd, 0xda, 0xb6, 0x98, + 0x23, 0xab, 0x23, 0x3c, 0xb2, 0x10, 0xa0, 0x53, + 0x5a, 0x56, 0x9f, 0xc5, 0xd0, 0xff, 0xbb, 0xe4, + 0x98, 0x3c, 0x69, 0x1e, 0xdb, 0x38, 0x8f, 0x7e, + 0x0f, 0xd2, 0x98, 0x88, 0x81, 0x8b, 0x45, 0x67, + 0xea, 0x33, 0xf1, 0xeb, 0xe9, 0x97, 0x55, 0x2e, + 0xd9, 0xaa, 0xeb, 0x5a, 0xec, 0xda, 0xe1, 0x68, + 0xa8, 0x9d, 0x3c, 0x84, 0x7c, 0x05, 0x3d, 0x62, + 0x87, 0x8f, 0x03, 0x21, 0x28, 0x95, 0x0c, 0x89, + 0x25, 0x22, 0x4a, 0xb0, 0x93, 0xa9, 0x50, 0xa2, + 0x2f, 0x57, 0x6e, 0x18, 0x42, 0x19, 0x54, 0x0c, + 0x55, 0x67, 0xc6, 0x11, 0x49, 0xf4, 0x5c, 0xd2, + 0xe9, 0x3d, 0xdd, 0x8b, 0x48, 0x71, 0x21, 0x00, + 0xc3, 0x9a, 0x6c, 0x85, 0x74, 0x28, 0x83, 0x4a, + 0x1b, 0x31, 0x05, 0xe1, 0x06, 0x92, 0xe7, 0xda, + 0x85, 0x73, 0x78, 0x45, 0x20, 0x7f, 0xae, 0x13, + 0x7c, 0x33, 0x06, 0x22, 0xf4, 0x83, 0xf9, 0x35, + 0x3f, 0x6c, 0x71, 0xa8, 0x4e, 0x48, 0xbe, 0x9b, + 0xce, 0x8a, 0xba, 0xda, 0xbe, 0x28, 0x08, 0xf7, + 0xe2, 0x14, 0x8c, 0x71, 0xea, 0x72, 0xf9, 0x33, + 0xf2, 0x88, 0x3f, 0xd7, 0xbb, 0x69, 0x6c, 0x29, + 0x19, 0xdc, 0x84, 0xce, 0x1f, 0x12, 0x4f, 0xc8, + 0xaf, 0xa5, 0x04, 0xba, 0x5a, 0xab, 0xb0, 0xd9, + 0x14, 0x1f, 0x6c, 0x68, 0x98, 0x39, 0x89, 0x7a, + 0xd9, 0xd8, 0x2f, 0xdf, 0xa8, 0x47, 0x4a, 0x25, + 0xe2, 0xfb, 0x33, 0xf4, 0x59, 0x78, 0xe1, 0x68, + 0x85, 0xcf, 0xfe, 0x59, 0x20, 0xd4, 0x05, 0x1d, + 0x80, 0x99, 0xae, 0xbc, 0xca, 0xae, 0x0f, 0x2f, + 0x65, 0x43, 0x34, 0x8e, 0x7e, 0xac, 0xd3, 0x93, + 0x2f, 0xac, 0x6d, 0x14, 0x3d, 0x02, 0x07, 0x70, + 0x9d, 0xa4, 0xf3, 0x1b, 0x5c, 0x36, 0xfc, 0x01, + 0x73, 0x34, 0x85, 0x0c, 0x6c, 0xd6, 0xf1, 0xbd, + 0x3f, 0xdf, 0xee, 0xf5, 0xd9, 0xba, 0x56, 0xef, + 0xf4, 0x9b, 0x6b, 0xee, 0x9f, 0x5a, 0x78, 0x6d, + 0x32, 0x19, 0xf4, 0xf7, 0xf8, 0x4c, 0x69, 0x0b, + 0x4b, 0xbc, 0xbb, 0xb7, 0xf2, 0x85, 0xaf, 0x70, + 0x75, 0x24, 0x6c, 0x54, 0xa7, 0x0e, 0x4d, 0x1d, + 0x01, 0xbf, 0x08, 0xac, 0xcf, 0x7f, 0x2c, 0xe3, + 0x14, 0x89, 0x5e, 0x70, 0x5a, 0x99, 0x92, 0xcd, + 0x01, 0x84, 0xc8, 0xd2, 0xab, 0xe5, 0x4f, 0x58, + 0xe7, 0x0f, 0x2f, 0x0e, 0xff, 0x68, 0xea, 0xfd, + 0x15, 0xb3, 0x17, 0xe6, 0xb0, 0xe7, 0x85, 0xd8, + 0x23, 0x2e, 0x05, 0xc7, 0xc9, 0xc4, 0x46, 0x1f, + 0xe1, 0x9e, 0x49, 0x20, 0x23, 0x24, 0x4d, 0x7e, + 0x29, 0x65, 0xff, 0xf4, 0xb6, 0xfd, 0x1a, 0x85, + 0xc4, 0x16, 0xec, 0xfc, 0xea, 0x7b, 0xd6, 0x2c, + 0x43, 0xf8, 0xb7, 0xbf, 0x79, 0xc0, 0x85, 0xcd, + 0xef, 0xe1, 0x98, 0xd3, 0xa5, 0xf7, 0x90, 0x8c, + 0xe9, 0x7f, 0x80, 0x6b, 0xd2, 0xac, 0x4c, 0x30, + 0xa7, 0xc6, 0x61, 0x6c, 0xd2, 0xf9, 0x2c, 0xff, + 0x30, 0xbc, 0x22, 0x81, 0x7d, 0x93, 0x12, 0xe4, + 0x0a, 0xcd, 0xaf, 0xdd, 0xe8, 0xab, 0x0a, 0x1e, + 0x13, 0xa4, 0x27, 0xc3, 0x5f, 0xf7, 0x4b, 0xbb, + 0x37, 0x09, 0x4b, 0x91, 0x6f, 0x92, 0x4f, 0xaf, + 0x52, 0xee, 0xdf, 0xef, 0x09, 0x6f, 0xf7, 0x5c, + 0x6e, 0x12, 0x17, 0x72, 0x63, 0x57, 0xc7, 0xba, + 0x3b, 0x6b, 0x38, 0x32, 0x73, 0x1b, 0x9c, 0x80, + 0xc1, 0x7a, 0xc6, 0xcf, 0xcd, 0x35, 0xc0, 0x6b, + 0x31, 0x1a, 0x6b, 0xe9, 0xd8, 0x2c, 0x29, 0x3f, + 0x96, 0xfb, 0xb6, 0xcd, 0x13, 0x91, 0x3b, 0xc2, + 0xd2, 0xa3, 0x31, 0x8d, 0xa4, 0xcd, 0x57, 0xcd, + 0x13, 0x3d, 0x64, 0xfd, 0x06, 0xce, 0xe6, 0xdc, + 0x0c, 0x24, 0x43, 0x31, 0x40, 0x57, 0xf1, 0x72, + 0x17, 0xe3, 0x3a, 0x63, 0x6d, 0x35, 0xcf, 0x5d, + 0x97, 0x40, 0x59, 0xdd, 0xf7, 0x3c, 0x02, 0xf7, + 0x1c, 0x7e, 0x05, 0xbb, 0xa9, 0x0d, 0x01, 0xb1, + 0x8e, 0xc0, 0x30, 0xa9, 0x53, 0x24, 0xc9, 0x89, + 0x84, 0x6d, 0xaa, 0xd0, 0xcd, 0x91, 0xc2, 0x4d, + 0x91, 0xb0, 0x89, 0xe2, 0xbf, 0x83, 0x44, 0xaa, + 0x28, 0x72, 0x23, 0xa0, 0xc2, 0xad, 0xad, 0x1c, + 0xfc, 0x3f, 0x09, 0x7a, 0x0b, 0xdc, 0xc5, 0x1b, + 0x87, 0x13, 0xc6, 0x5b, 0x59, 0x8d, 0xf2, 0xc8, + 0xaf, 0xdf, 0x11, 0x95, + }, + .rlen = 4100, + }, }; /* -- cgit v1.2.3-59-g8ed1b From 91755a921c4af51c355bcb74a98b717d5c1818b6 Mon Sep 17 00:00:00 2001 From: Zoltan Sogor Date: Fri, 7 Dec 2007 16:48:11 +0800 Subject: [CRYPTO] tcrypt: Add common compression tester function Add common compression tester function Modify deflate test case to use the common compressor test function Signed-off-by: Zoltan Sogor Signed-off-by: Herbert Xu --- crypto/tcrypt.c | 33 ++++++++++++++++++++------------- 1 file changed, 20 insertions(+), 13 deletions(-) diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c index a6d4160c37f7..c8d3e600c541 100644 --- a/crypto/tcrypt.c +++ b/crypto/tcrypt.c @@ -1019,7 +1019,8 @@ out: crypto_free_hash(tfm); } -static void test_deflate(void) +static void test_comp(char *algo, struct comp_testvec *ctemplate, + struct comp_testvec *dtemplate, int ctcount, int dtcount) { unsigned int i; char result[COMP_BUF_SIZE]; @@ -1027,25 +1028,26 @@ static void test_deflate(void) struct comp_testvec *tv; unsigned int tsize; - printk("\ntesting deflate compression\n"); + printk("\ntesting %s compression\n", algo); - tsize = sizeof (deflate_comp_tv_template); + tsize = sizeof(struct comp_testvec); + tsize *= ctcount; if (tsize > TVMEMSIZE) { printk("template (%u) too big for tvmem (%u)\n", tsize, TVMEMSIZE); return; } - memcpy(tvmem, deflate_comp_tv_template, tsize); + memcpy(tvmem, ctemplate, tsize); tv = (void *)tvmem; - tfm = crypto_alloc_comp("deflate", 0, CRYPTO_ALG_ASYNC); + tfm = crypto_alloc_comp(algo, 0, CRYPTO_ALG_ASYNC); if (IS_ERR(tfm)) { - printk("failed to load transform for deflate\n"); + printk("failed to load transform for %s\n", algo); return; } - for (i = 0; i < DEFLATE_COMP_TEST_VECTORS; i++) { + for (i = 0; i < ctcount; i++) { int ilen, ret, dlen = COMP_BUF_SIZE; printk("test %u:\n", i + 1); @@ -1064,19 +1066,20 @@ static void test_deflate(void) ilen, dlen); } - printk("\ntesting deflate decompression\n"); + printk("\ntesting %s decompression\n", algo); - tsize = sizeof (deflate_decomp_tv_template); + tsize = sizeof(struct comp_testvec); + tsize *= dtcount; if (tsize > TVMEMSIZE) { printk("template (%u) too big for tvmem (%u)\n", tsize, TVMEMSIZE); goto out; } - memcpy(tvmem, deflate_decomp_tv_template, tsize); + memcpy(tvmem, dtemplate, tsize); tv = (void *)tvmem; - for (i = 0; i < DEFLATE_DECOMP_TEST_VECTORS; i++) { + for (i = 0; i < dtcount; i++) { int ilen, ret, dlen = COMP_BUF_SIZE; printk("test %u:\n", i + 1); @@ -1286,7 +1289,9 @@ static void do_test(void) test_hash("tgr192", tgr192_tv_template, TGR192_TEST_VECTORS); test_hash("tgr160", tgr160_tv_template, TGR160_TEST_VECTORS); test_hash("tgr128", tgr128_tv_template, TGR128_TEST_VECTORS); - test_deflate(); + test_comp("deflate", deflate_comp_tv_template, + deflate_decomp_tv_template, DEFLATE_COMP_TEST_VECTORS, + DEFLATE_DECOMP_TEST_VECTORS); test_hash("crc32c", crc32c_tv_template, CRC32C_TEST_VECTORS); test_hash("hmac(md5)", hmac_md5_tv_template, HMAC_MD5_TEST_VECTORS); @@ -1402,7 +1407,9 @@ static void do_test(void) break; case 13: - test_deflate(); + test_comp("deflate", deflate_comp_tv_template, + deflate_decomp_tv_template, DEFLATE_COMP_TEST_VECTORS, + DEFLATE_DECOMP_TEST_VECTORS); break; case 14: -- cgit v1.2.3-59-g8ed1b From 0b77abb3b2d0c2eee1da79a3f3bd4312a0edb156 Mon Sep 17 00:00:00 2001 From: Zoltan Sogor Date: Fri, 7 Dec 2007 16:53:23 +0800 Subject: [CRYPTO] lzo: Add LZO compression algorithm support Add LZO compression algorithm support Signed-off-by: Zoltan Sogor Signed-off-by: Herbert Xu --- crypto/Kconfig | 8 +++++ crypto/Makefile | 1 + crypto/lzo.c | 106 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ crypto/tcrypt.c | 9 ++++- crypto/tcrypt.h | 82 +++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 205 insertions(+), 1 deletion(-) create mode 100644 crypto/lzo.c diff --git a/crypto/Kconfig b/crypto/Kconfig index 40ae92caa4f6..4fd14e4efed2 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -536,6 +536,14 @@ config CRYPTO_AUTHENC Authenc: Combined mode wrapper for IPsec. This is required for IPSec. +config CRYPTO_LZO + tristate "LZO compression algorithm" + select CRYPTO_ALGAPI + select LZO_COMPRESS + select LZO_DECOMPRESS + help + This is the LZO algorithm. + source "drivers/crypto/Kconfig" endif # if CRYPTO diff --git a/crypto/Makefile b/crypto/Makefile index 957343cbc0e2..83532ac8466d 100644 --- a/crypto/Makefile +++ b/crypto/Makefile @@ -55,6 +55,7 @@ obj-$(CONFIG_CRYPTO_DEFLATE) += deflate.o obj-$(CONFIG_CRYPTO_MICHAEL_MIC) += michael_mic.o obj-$(CONFIG_CRYPTO_CRC32C) += crc32c.o obj-$(CONFIG_CRYPTO_AUTHENC) += authenc.o +obj-$(CONFIG_CRYPTO_LZO) += lzo.o obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o diff --git a/crypto/lzo.c b/crypto/lzo.c new file mode 100644 index 000000000000..48c32883f024 --- /dev/null +++ b/crypto/lzo.c @@ -0,0 +1,106 @@ +/* + * Cryptographic API. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#include +#include +#include +#include +#include + +struct lzo_ctx { + void *lzo_comp_mem; +}; + +static int lzo_init(struct crypto_tfm *tfm) +{ + struct lzo_ctx *ctx = crypto_tfm_ctx(tfm); + + ctx->lzo_comp_mem = vmalloc(LZO1X_MEM_COMPRESS); + if (!ctx->lzo_comp_mem) + return -ENOMEM; + + return 0; +} + +static void lzo_exit(struct crypto_tfm *tfm) +{ + struct lzo_ctx *ctx = crypto_tfm_ctx(tfm); + + vfree(ctx->lzo_comp_mem); +} + +static int lzo_compress(struct crypto_tfm *tfm, const u8 *src, + unsigned int slen, u8 *dst, unsigned int *dlen) +{ + struct lzo_ctx *ctx = crypto_tfm_ctx(tfm); + size_t tmp_len = *dlen; /* size_t(ulong) <-> uint on 64 bit */ + int err; + + err = lzo1x_1_compress(src, slen, dst, &tmp_len, ctx->lzo_comp_mem); + + if (err != LZO_E_OK) + return -EINVAL; + + *dlen = tmp_len; + return 0; +} + +static int lzo_decompress(struct crypto_tfm *tfm, const u8 *src, + unsigned int slen, u8 *dst, unsigned int *dlen) +{ + int err; + size_t tmp_len = *dlen; /* size_t(ulong) <-> uint on 64 bit */ + + err = lzo1x_decompress_safe(src, slen, dst, &tmp_len); + + if (err != LZO_E_OK) + return -EINVAL; + + *dlen = tmp_len; + return 0; + +} + +static struct crypto_alg alg = { + .cra_name = "lzo", + .cra_flags = CRYPTO_ALG_TYPE_COMPRESS, + .cra_ctxsize = sizeof(struct lzo_ctx), + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(alg.cra_list), + .cra_init = lzo_init, + .cra_exit = lzo_exit, + .cra_u = { .compress = { + .coa_compress = lzo_compress, + .coa_decompress = lzo_decompress } } +}; + +static int __init init(void) +{ + return crypto_register_alg(&alg); +} + +static void __exit fini(void) +{ + crypto_unregister_alg(&alg); +} + +module_init(init); +module_exit(fini); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("LZO Compression Algorithm"); diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c index c8d3e600c541..943a514478bd 100644 --- a/crypto/tcrypt.c +++ b/crypto/tcrypt.c @@ -84,7 +84,7 @@ static char *check[] = { "cast6", "arc4", "michael_mic", "deflate", "crc32c", "tea", "xtea", "arc4", "michael_mic", "deflate", "crc32c", "tea", "xtea", "khazad", "wp512", "wp384", "wp256", "tnepres", "xeta", "fcrypt", - "camellia", "seed", "salsa20", NULL + "camellia", "seed", "salsa20", "lzo", NULL }; static void hexdump(unsigned char *buf, unsigned int len) @@ -1292,6 +1292,8 @@ static void do_test(void) test_comp("deflate", deflate_comp_tv_template, deflate_decomp_tv_template, DEFLATE_COMP_TEST_VECTORS, DEFLATE_DECOMP_TEST_VECTORS); + test_comp("lzo", lzo_comp_tv_template, lzo_decomp_tv_template, + LZO_COMP_TEST_VECTORS, LZO_DECOMP_TEST_VECTORS); test_hash("crc32c", crc32c_tv_template, CRC32C_TEST_VECTORS); test_hash("hmac(md5)", hmac_md5_tv_template, HMAC_MD5_TEST_VECTORS); @@ -1550,6 +1552,11 @@ static void do_test(void) AES_GCM_DEC_TEST_VECTORS); break; + case 36: + test_comp("lzo", lzo_comp_tv_template, lzo_decomp_tv_template, + LZO_COMP_TEST_VECTORS, LZO_DECOMP_TEST_VECTORS); + break; + case 100: test_hash("hmac(md5)", hmac_md5_tv_template, HMAC_MD5_TEST_VECTORS); diff --git a/crypto/tcrypt.h b/crypto/tcrypt.h index d3c380f5fe83..175f26a58e2d 100644 --- a/crypto/tcrypt.h +++ b/crypto/tcrypt.h @@ -7460,6 +7460,88 @@ static struct comp_testvec deflate_decomp_tv_template[] = { }, }; +/* + * LZO test vectors (null-terminated strings). + */ +#define LZO_COMP_TEST_VECTORS 2 +#define LZO_DECOMP_TEST_VECTORS 2 + +static struct comp_testvec lzo_comp_tv_template[] = { + { + .inlen = 70, + .outlen = 46, + .input = "Join us now and share the software " + "Join us now and share the software ", + .output = { 0x00, 0x0d, 0x4a, 0x6f, 0x69, 0x6e, 0x20, 0x75, + 0x73, 0x20, 0x6e, 0x6f, 0x77, 0x20, 0x61, 0x6e, + 0x64, 0x20, 0x73, 0x68, 0x61, 0x72, 0x65, 0x20, + 0x74, 0x68, 0x65, 0x20, 0x73, 0x6f, 0x66, 0x74, + 0x77, 0x70, 0x01, 0x01, 0x4a, 0x6f, 0x69, 0x6e, + 0x3d, 0x88, 0x00, 0x11, 0x00, 0x00 }, + }, { + .inlen = 159, + .outlen = 133, + .input = "This document describes a compression method based on the LZO " + "compression algorithm. This document defines the application of " + "the LZO algorithm used in UBIFS.", + .output = { 0x00, 0x2b, 0x54, 0x68, 0x69, 0x73, 0x20, 0x64, + 0x6f, 0x63, 0x75, 0x6d, 0x65, 0x6e, 0x74, 0x20, + 0x64, 0x65, 0x73, 0x63, 0x72, 0x69, 0x62, 0x65, + 0x73, 0x20, 0x61, 0x20, 0x63, 0x6f, 0x6d, 0x70, + 0x72, 0x65, 0x73, 0x73, 0x69, 0x6f, 0x6e, 0x20, + 0x6d, 0x65, 0x74, 0x68, 0x6f, 0x64, 0x20, 0x62, + 0x61, 0x73, 0x65, 0x64, 0x20, 0x6f, 0x6e, 0x20, + 0x74, 0x68, 0x65, 0x20, 0x4c, 0x5a, 0x4f, 0x2b, + 0x8c, 0x00, 0x0d, 0x61, 0x6c, 0x67, 0x6f, 0x72, + 0x69, 0x74, 0x68, 0x6d, 0x2e, 0x20, 0x20, 0x54, + 0x68, 0x69, 0x73, 0x2a, 0x54, 0x01, 0x02, 0x66, + 0x69, 0x6e, 0x65, 0x73, 0x94, 0x06, 0x05, 0x61, + 0x70, 0x70, 0x6c, 0x69, 0x63, 0x61, 0x74, 0x76, + 0x0a, 0x6f, 0x66, 0x88, 0x02, 0x60, 0x09, 0x27, + 0xf0, 0x00, 0x0c, 0x20, 0x75, 0x73, 0x65, 0x64, + 0x20, 0x69, 0x6e, 0x20, 0x55, 0x42, 0x49, 0x46, + 0x53, 0x2e, 0x11, 0x00, 0x00 }, + }, +}; + +static struct comp_testvec lzo_decomp_tv_template[] = { + { + .inlen = 133, + .outlen = 159, + .input = { 0x00, 0x2b, 0x54, 0x68, 0x69, 0x73, 0x20, 0x64, + 0x6f, 0x63, 0x75, 0x6d, 0x65, 0x6e, 0x74, 0x20, + 0x64, 0x65, 0x73, 0x63, 0x72, 0x69, 0x62, 0x65, + 0x73, 0x20, 0x61, 0x20, 0x63, 0x6f, 0x6d, 0x70, + 0x72, 0x65, 0x73, 0x73, 0x69, 0x6f, 0x6e, 0x20, + 0x6d, 0x65, 0x74, 0x68, 0x6f, 0x64, 0x20, 0x62, + 0x61, 0x73, 0x65, 0x64, 0x20, 0x6f, 0x6e, 0x20, + 0x74, 0x68, 0x65, 0x20, 0x4c, 0x5a, 0x4f, 0x2b, + 0x8c, 0x00, 0x0d, 0x61, 0x6c, 0x67, 0x6f, 0x72, + 0x69, 0x74, 0x68, 0x6d, 0x2e, 0x20, 0x20, 0x54, + 0x68, 0x69, 0x73, 0x2a, 0x54, 0x01, 0x02, 0x66, + 0x69, 0x6e, 0x65, 0x73, 0x94, 0x06, 0x05, 0x61, + 0x70, 0x70, 0x6c, 0x69, 0x63, 0x61, 0x74, 0x76, + 0x0a, 0x6f, 0x66, 0x88, 0x02, 0x60, 0x09, 0x27, + 0xf0, 0x00, 0x0c, 0x20, 0x75, 0x73, 0x65, 0x64, + 0x20, 0x69, 0x6e, 0x20, 0x55, 0x42, 0x49, 0x46, + 0x53, 0x2e, 0x11, 0x00, 0x00 }, + .output = "This document describes a compression method based on the LZO " + "compression algorithm. This document defines the application of " + "the LZO algorithm used in UBIFS.", + }, { + .inlen = 46, + .outlen = 70, + .input = { 0x00, 0x0d, 0x4a, 0x6f, 0x69, 0x6e, 0x20, 0x75, + 0x73, 0x20, 0x6e, 0x6f, 0x77, 0x20, 0x61, 0x6e, + 0x64, 0x20, 0x73, 0x68, 0x61, 0x72, 0x65, 0x20, + 0x74, 0x68, 0x65, 0x20, 0x73, 0x6f, 0x66, 0x74, + 0x77, 0x70, 0x01, 0x01, 0x4a, 0x6f, 0x69, 0x6e, + 0x3d, 0x88, 0x00, 0x11, 0x00, 0x00 }, + .output = "Join us now and share the software " + "Join us now and share the software ", + }, +}; + /* * Michael MIC test vectors from IEEE 802.11i */ -- cgit v1.2.3-59-g8ed1b From 5de8f1b562e87ae9d93a4e0897e54c18a5e82915 Mon Sep 17 00:00:00 2001 From: Tan Swee Heng Date: Fri, 7 Dec 2007 17:17:43 +0800 Subject: [CRYPTO] tcrypt: Added salsa20 speed test This patch adds a simple speed test for salsa20. Usage: modprobe tcrypt mode=206 Signed-of-by: Tan Swee Heng Signed-off-by: Herbert Xu --- crypto/tcrypt.c | 5 +++++ crypto/tcrypt.h | 16 ++++++++++++++++ 2 files changed, 21 insertions(+) diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c index 943a514478bd..0cfb8ebb22ba 100644 --- a/crypto/tcrypt.c +++ b/crypto/tcrypt.c @@ -1668,6 +1668,11 @@ static void do_test(void) camellia_speed_template); break; + case 206: + test_cipher_speed("salsa20", ENCRYPT, sec, NULL, 0, + salsa20_speed_template); + break; + case 300: /* fall through */ diff --git a/crypto/tcrypt.h b/crypto/tcrypt.h index 175f26a58e2d..5b865092151d 100644 --- a/crypto/tcrypt.h +++ b/crypto/tcrypt.h @@ -7947,4 +7947,20 @@ static struct cipher_speed camellia_speed_template[] = { { .klen = 0, .blen = 0, } }; +static struct cipher_speed salsa20_speed_template[] = { + { .klen = 16, .blen = 16, }, + { .klen = 16, .blen = 64, }, + { .klen = 16, .blen = 256, }, + { .klen = 16, .blen = 1024, }, + { .klen = 16, .blen = 8192, }, + { .klen = 32, .blen = 16, }, + { .klen = 32, .blen = 64, }, + { .klen = 32, .blen = 256, }, + { .klen = 32, .blen = 1024, }, + { .klen = 32, .blen = 8192, }, + + /* End marker */ + { .klen = 0, .blen = 0, } +}; + #endif /* _CRYPTO_TCRYPT_H */ -- cgit v1.2.3-59-g8ed1b From fdc520aa693d462f4958339534a3b596f95795b7 Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Mon, 10 Dec 2007 15:48:17 +0800 Subject: [CRYPTO] geode: Use correct encrypt/decrypt function in fallback crypto_blkcipher_decrypt is wrong because it does not care about the IV. Signed-off-by: Sebastian Siewior Signed-off-by: Herbert Xu --- drivers/crypto/geode-aes.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/crypto/geode-aes.c b/drivers/crypto/geode-aes.c index 68be7d08aeb3..581b003ad25c 100644 --- a/drivers/crypto/geode-aes.c +++ b/drivers/crypto/geode-aes.c @@ -190,7 +190,7 @@ static int fallback_blk_dec(struct blkcipher_desc *desc, tfm = desc->tfm; desc->tfm = op->fallback.blk; - ret = crypto_blkcipher_decrypt(desc, dst, src, nbytes); + ret = crypto_blkcipher_decrypt_iv(desc, dst, src, nbytes); desc->tfm = tfm; return ret; @@ -206,7 +206,7 @@ static int fallback_blk_enc(struct blkcipher_desc *desc, tfm = desc->tfm; desc->tfm = op->fallback.blk; - ret = crypto_blkcipher_encrypt(desc, dst, src, nbytes); + ret = crypto_blkcipher_encrypt_iv(desc, dst, src, nbytes); desc->tfm = tfm; return ret; -- cgit v1.2.3-59-g8ed1b From 2d74d405fc5ea78b20a4a2efd24201db424e07b1 Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Mon, 10 Dec 2007 15:49:41 +0800 Subject: [CRYPTO] s390-aes: Use correct encrypt/decrypt function in fallback crypto_blkcipher_decrypt is wrong because it does not care about the IV. Signed-off-by: Sebastian Siewior Signed-off-by: Herbert Xu --- arch/s390/crypto/aes_s390.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c index 85246112ab5e..46c97058ebe1 100644 --- a/arch/s390/crypto/aes_s390.c +++ b/arch/s390/crypto/aes_s390.c @@ -234,13 +234,10 @@ static int fallback_blk_dec(struct blkcipher_desc *desc, struct crypto_blkcipher *tfm; struct s390_aes_ctx *sctx = crypto_blkcipher_ctx(desc->tfm); - memcpy(crypto_blkcipher_crt(sctx->fallback.blk)->iv, desc->info, - AES_BLOCK_SIZE); - tfm = desc->tfm; desc->tfm = sctx->fallback.blk; - ret = crypto_blkcipher_decrypt(desc, dst, src, nbytes); + ret = crypto_blkcipher_decrypt_iv(desc, dst, src, nbytes); desc->tfm = tfm; return ret; @@ -254,13 +251,10 @@ static int fallback_blk_enc(struct blkcipher_desc *desc, struct crypto_blkcipher *tfm; struct s390_aes_ctx *sctx = crypto_blkcipher_ctx(desc->tfm); - memcpy(crypto_blkcipher_crt(sctx->fallback.blk)->iv, desc->info, - AES_BLOCK_SIZE); - tfm = desc->tfm; desc->tfm = sctx->fallback.blk; - ret = crypto_blkcipher_encrypt(desc, dst, src, nbytes); + ret = crypto_blkcipher_encrypt_iv(desc, dst, src, nbytes); desc->tfm = tfm; return ret; -- cgit v1.2.3-59-g8ed1b From c2c61f513db395ddd8d67690bf3301ebe1e8155a Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 10 Dec 2007 10:54:44 +0800 Subject: [CRYPTO] authenc: Fix typo in ivsize The ivsize should be fetched from ablkcipher, not blkcipher. Signed-off-by: Herbert Xu --- crypto/authenc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/crypto/authenc.c b/crypto/authenc.c index fbbc2b505a21..80d9d0b18c13 100644 --- a/crypto/authenc.c +++ b/crypto/authenc.c @@ -333,7 +333,7 @@ static struct crypto_instance *crypto_authenc_alloc(struct rtattr **tb) inst->alg.cra_alignmask = auth->cra_alignmask | enc->cra_alignmask; inst->alg.cra_type = &crypto_aead_type; - inst->alg.cra_aead.ivsize = enc->cra_blkcipher.ivsize; + inst->alg.cra_aead.ivsize = enc->cra_ablkcipher.ivsize; inst->alg.cra_aead.maxauthsize = auth->cra_type == &crypto_hash_type ? auth->cra_hash.digestsize : auth->cra_digest.dia_digestsize; -- cgit v1.2.3-59-g8ed1b From 12dc5e62b4f93f1d399fd81e35be3f9ea0027712 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 10 Dec 2007 10:55:21 +0800 Subject: [CRYPTO] authenc: Use RTA_OK to check length This patch changes setkey to use RTA_OK to check the validity of the setkey request. Signed-off-by: Herbert Xu --- crypto/authenc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/crypto/authenc.c b/crypto/authenc.c index 80d9d0b18c13..aa442dea5c43 100644 --- a/crypto/authenc.c +++ b/crypto/authenc.c @@ -44,7 +44,7 @@ static int crypto_authenc_setkey(struct crypto_aead *authenc, const u8 *key, struct crypto_authenc_key_param *param; int err = -EINVAL; - if (keylen < sizeof(*rta)) + if (!RTA_OK(rta, keylen)) goto badkey; if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM) goto badkey; -- cgit v1.2.3-59-g8ed1b From 7c3d703fa81db42f9766325cebd6bfc1c5eac838 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 10 Dec 2007 16:15:41 +0800 Subject: [CRYPTO] authenc: Merge common hashing code This patch merges the common hashing code between encryption and decryption. Signed-off-by: Herbert Xu --- crypto/authenc.c | 66 ++++++++++++++++++++++++-------------------------------- 1 file changed, 28 insertions(+), 38 deletions(-) diff --git a/crypto/authenc.c b/crypto/authenc.c index aa442dea5c43..394e73308e31 100644 --- a/crypto/authenc.c +++ b/crypto/authenc.c @@ -87,17 +87,18 @@ badkey: goto out; } -static int crypto_authenc_hash(struct aead_request *req) +static u8 *crypto_authenc_hash(struct aead_request *req, unsigned int flags, + struct scatterlist *cipher, + unsigned int cryptlen) { struct crypto_aead *authenc = crypto_aead_reqtfm(req); struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc); struct crypto_hash *auth = ctx->auth; struct hash_desc desc = { .tfm = auth, + .flags = aead_request_flags(req) & flags, }; u8 *hash = aead_request_ctx(req); - struct scatterlist *dst = req->dst; - unsigned int cryptlen = req->cryptlen; int err; hash = (u8 *)ALIGN((unsigned long)hash + crypto_hash_alignmask(auth), @@ -112,7 +113,7 @@ static int crypto_authenc_hash(struct aead_request *req) if (err) goto auth_unlock; - err = crypto_hash_update(&desc, dst, cryptlen); + err = crypto_hash_update(&desc, cipher, cryptlen); if (err) goto auth_unlock; @@ -121,7 +122,21 @@ auth_unlock: spin_unlock_bh(&ctx->auth_lock); if (err) - return err; + return ERR_PTR(err); + + return hash; +} + +static int crypto_authenc_genicv(struct aead_request *req, unsigned int flags) +{ + struct crypto_aead *authenc = crypto_aead_reqtfm(req); + struct scatterlist *dst = req->dst; + unsigned int cryptlen = req->cryptlen; + u8 *hash; + + hash = crypto_authenc_hash(req, flags, dst, cryptlen); + if (IS_ERR(hash)) + return PTR_ERR(hash); scatterwalk_map_and_copy(hash, dst, cryptlen, crypto_aead_authsize(authenc), 1); @@ -132,7 +147,7 @@ static void crypto_authenc_encrypt_done(struct crypto_async_request *req, int err) { if (!err) - err = crypto_authenc_hash(req->data); + err = crypto_authenc_genicv(req->data, 0); aead_request_complete(req->data, err); } @@ -154,50 +169,25 @@ static int crypto_authenc_encrypt(struct aead_request *req) if (err) return err; - return crypto_authenc_hash(req); + return crypto_authenc_genicv(req, CRYPTO_TFM_REQ_MAY_SLEEP); } static int crypto_authenc_verify(struct aead_request *req, unsigned int cryptlen) { struct crypto_aead *authenc = crypto_aead_reqtfm(req); - struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc); - struct crypto_hash *auth = ctx->auth; - struct hash_desc desc = { - .tfm = auth, - .flags = aead_request_flags(req), - }; - u8 *ohash = aead_request_ctx(req); + u8 *ohash; u8 *ihash; struct scatterlist *src = req->src; unsigned int authsize; - int err; - ohash = (u8 *)ALIGN((unsigned long)ohash + crypto_hash_alignmask(auth), - crypto_hash_alignmask(auth) + 1); - ihash = ohash + crypto_hash_digestsize(auth); - - spin_lock_bh(&ctx->auth_lock); - err = crypto_hash_init(&desc); - if (err) - goto auth_unlock; - - err = crypto_hash_update(&desc, req->assoc, req->assoclen); - if (err) - goto auth_unlock; - - err = crypto_hash_update(&desc, src, cryptlen); - if (err) - goto auth_unlock; - - err = crypto_hash_final(&desc, ohash); -auth_unlock: - spin_unlock_bh(&ctx->auth_lock); - - if (err) - return err; + ohash = crypto_authenc_hash(req, CRYPTO_TFM_REQ_MAY_SLEEP, src, + cryptlen); + if (IS_ERR(ohash)) + return PTR_ERR(ohash); authsize = crypto_aead_authsize(authenc); + ihash = ohash + authsize; scatterwalk_map_and_copy(ihash, src, cryptlen, authsize, 0); return memcmp(ihash, ohash, authsize) ? -EBADMSG: 0; } -- cgit v1.2.3-59-g8ed1b From f17922bc75d6261dd6e0e2d687ff43b96e91e04a Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 12 Dec 2007 10:42:41 +0800 Subject: [CRYPTO] geode: Add __dev{init,exit} annotations This patch adds __dev{init,exit} annotations. Signed-off-by: Adrian Bunk Signed-off-by: Herbert Xu --- drivers/crypto/geode-aes.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/crypto/geode-aes.c b/drivers/crypto/geode-aes.c index 581b003ad25c..4801162919d9 100644 --- a/drivers/crypto/geode-aes.c +++ b/drivers/crypto/geode-aes.c @@ -499,7 +499,7 @@ static struct crypto_alg geode_ecb_alg = { } }; -static void +static void __devexit geode_aes_remove(struct pci_dev *dev) { crypto_unregister_alg(&geode_alg); @@ -514,7 +514,7 @@ geode_aes_remove(struct pci_dev *dev) } -static int +static int __devinit geode_aes_probe(struct pci_dev *dev, const struct pci_device_id *id) { int ret; -- cgit v1.2.3-59-g8ed1b From 5e553110f27ff77591ec7305c6216ad6949f7a95 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Fri, 14 Dec 2007 16:43:32 +0800 Subject: [CRYPTO] authenc: Select HASH in Kconfig i get here: ---- LD vmlinux SYSMAP System.map SYSMAP .tmp_System.map Building modules, stage 2. MODPOST 226 modules ERROR: "crypto_hash_type" [crypto/authenc.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 --- which fails because crypto_hash_type is declared in crypto/hash.c. You might wanna fix it like so: Signed-off-by: Borislav Petkov Signed-off-by: Herbert Xu --- crypto/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/crypto/Kconfig b/crypto/Kconfig index 4fd14e4efed2..1eb4bcdb344f 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -532,6 +532,7 @@ config CRYPTO_AUTHENC tristate "Authenc support" select CRYPTO_AEAD select CRYPTO_MANAGER + select CRYPTO_HASH help Authenc: Combined mode wrapper for IPsec. This is required for IPSec. -- cgit v1.2.3-59-g8ed1b From 551a09a7a954f720067f207657bbbd26a3fe156a Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sat, 1 Dec 2007 21:47:07 +1100 Subject: [CRYPTO] api: Sanitise mask when allocating ablkcipher/hash When allocating ablkcipher/hash objects, we use a mask that's wider than the usual type mask. This patch sanitises the mask supplied by the user so we don't end up using a narrower mask which may lead to unintended results. Signed-off-by: Herbert Xu --- include/linux/crypto.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/linux/crypto.h b/include/linux/crypto.h index 48aa5959abbb..ef7642ed3e42 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -532,6 +532,7 @@ static inline struct crypto_ablkcipher *crypto_alloc_ablkcipher( const char *alg_name, u32 type, u32 mask) { type &= ~CRYPTO_ALG_TYPE_MASK; + mask &= ~CRYPTO_ALG_TYPE_MASK; type |= CRYPTO_ALG_TYPE_BLKCIPHER; mask |= CRYPTO_ALG_TYPE_BLKCIPHER_MASK; @@ -554,6 +555,7 @@ static inline int crypto_has_ablkcipher(const char *alg_name, u32 type, u32 mask) { type &= ~CRYPTO_ALG_TYPE_MASK; + mask &= ~CRYPTO_ALG_TYPE_MASK; type |= CRYPTO_ALG_TYPE_BLKCIPHER; mask |= CRYPTO_ALG_TYPE_BLKCIPHER_MASK; @@ -1086,6 +1088,7 @@ static inline struct crypto_hash *crypto_alloc_hash(const char *alg_name, u32 type, u32 mask) { type &= ~CRYPTO_ALG_TYPE_MASK; + mask &= ~CRYPTO_ALG_TYPE_MASK; type |= CRYPTO_ALG_TYPE_HASH; mask |= CRYPTO_ALG_TYPE_HASH_MASK; @@ -1105,6 +1108,7 @@ static inline void crypto_free_hash(struct crypto_hash *tfm) static inline int crypto_has_hash(const char *alg_name, u32 type, u32 mask) { type &= ~CRYPTO_ALG_TYPE_MASK; + mask &= ~CRYPTO_ALG_TYPE_MASK; type |= CRYPTO_ALG_TYPE_HASH; mask |= CRYPTO_ALG_TYPE_HASH_MASK; -- cgit v1.2.3-59-g8ed1b From 68b6c7d6919be7c732fc6229c55e35d0166e9258 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 7 Dec 2007 20:18:17 +0800 Subject: [CRYPTO] api: Add crypto_attr_alg_name This patch adds a new helper crypto_attr_alg_name which is basically the first half of crypto_attr_alg. That is, it returns an algorithm name parameter as a string without looking it up. The caller can then look it up immediately or defer it until later. Signed-off-by: Herbert Xu --- crypto/algapi.c | 18 ++++++++++++++++-- include/crypto/algapi.h | 1 + 2 files changed, 17 insertions(+), 2 deletions(-) diff --git a/crypto/algapi.c b/crypto/algapi.c index 08eca6da1d53..e65cb50cf4af 100644 --- a/crypto/algapi.c +++ b/crypto/algapi.c @@ -472,7 +472,7 @@ int crypto_check_attr_type(struct rtattr **tb, u32 type) } EXPORT_SYMBOL_GPL(crypto_check_attr_type); -struct crypto_alg *crypto_attr_alg(struct rtattr *rta, u32 type, u32 mask) +const char *crypto_attr_alg_name(struct rtattr *rta) { struct crypto_attr_alg *alga; @@ -486,7 +486,21 @@ struct crypto_alg *crypto_attr_alg(struct rtattr *rta, u32 type, u32 mask) alga = RTA_DATA(rta); alga->name[CRYPTO_MAX_ALG_NAME - 1] = 0; - return crypto_alg_mod_lookup(alga->name, type, mask); + return alga->name; +} +EXPORT_SYMBOL_GPL(crypto_attr_alg_name); + +struct crypto_alg *crypto_attr_alg(struct rtattr *rta, u32 type, u32 mask) +{ + const char *name; + int err; + + name = crypto_attr_alg_name(rta); + err = PTR_ERR(name); + if (IS_ERR(name)) + return ERR_PTR(err); + + return crypto_alg_mod_lookup(name, type, mask); } EXPORT_SYMBOL_GPL(crypto_attr_alg); diff --git a/include/crypto/algapi.h b/include/crypto/algapi.h index 2cdb227fc39d..726a765e5ec6 100644 --- a/include/crypto/algapi.h +++ b/include/crypto/algapi.h @@ -113,6 +113,7 @@ struct crypto_tfm *crypto_spawn_tfm(struct crypto_spawn *spawn, u32 type, struct crypto_attr_type *crypto_get_attr_type(struct rtattr **tb); int crypto_check_attr_type(struct rtattr **tb, u32 type); +const char *crypto_attr_alg_name(struct rtattr *rta); struct crypto_alg *crypto_attr_alg(struct rtattr *rta, u32 type, u32 mask); int crypto_attr_u32(struct rtattr *rta, u32 *num); struct crypto_instance *crypto_alloc_instance(const char *name, -- cgit v1.2.3-59-g8ed1b From 2589469d7bc69bdfad4e05d88a0d2748f92ef0f3 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Wed, 12 Dec 2007 19:16:38 +0800 Subject: [CRYPTO] gcm: Fix request context alignment This patch fixes the request context alignment so that it is actually aligned to the value required by the algorithm. Signed-off-by: Herbert Xu --- crypto/gcm.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/crypto/gcm.c b/crypto/gcm.c index 73565d607ee7..08183171913c 100644 --- a/crypto/gcm.c +++ b/crypto/gcm.c @@ -43,6 +43,14 @@ struct crypto_gcm_req_priv_ctx { struct ablkcipher_request abreq; }; +static inline struct crypto_gcm_req_priv_ctx *crypto_gcm_reqctx( + struct aead_request *req) +{ + unsigned long align = crypto_aead_alignmask(crypto_aead_reqtfm(req)); + + return (void *)PTR_ALIGN((u8 *)aead_request_ctx(req), align + 1); +} + static void crypto_gcm_ghash_init(struct crypto_gcm_ghash_ctx *ctx, u32 flags, struct gf128mul_4k *gf128) { @@ -224,7 +232,7 @@ static int crypto_gcm_init_crypt(struct ablkcipher_request *ablk_req, { struct crypto_aead *aead = crypto_aead_reqtfm(req); struct crypto_gcm_ctx *ctx = crypto_aead_ctx(aead); - struct crypto_gcm_req_priv_ctx *pctx = aead_request_ctx(req); + struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req); u32 flags = req->base.tfm->crt_flags; u8 *auth_tag = pctx->auth_tag; u8 *counter = pctx->counter; @@ -256,7 +264,7 @@ static int crypto_gcm_init_crypt(struct ablkcipher_request *ablk_req, static int crypto_gcm_hash(struct aead_request *req) { struct crypto_aead *aead = crypto_aead_reqtfm(req); - struct crypto_gcm_req_priv_ctx *pctx = aead_request_ctx(req); + struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req); u8 *auth_tag = pctx->auth_tag; struct crypto_gcm_ghash_ctx *ghash = &pctx->ghash; @@ -281,7 +289,7 @@ static void crypto_gcm_encrypt_done(struct crypto_async_request *areq, int err) static int crypto_gcm_encrypt(struct aead_request *req) { - struct crypto_gcm_req_priv_ctx *pctx = aead_request_ctx(req); + struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req); struct ablkcipher_request *abreq = &pctx->abreq; int err = 0; @@ -307,7 +315,7 @@ static void crypto_gcm_decrypt_done(struct crypto_async_request *areq, int err) static int crypto_gcm_decrypt(struct aead_request *req) { struct crypto_aead *aead = crypto_aead_reqtfm(req); - struct crypto_gcm_req_priv_ctx *pctx = aead_request_ctx(req); + struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req); struct ablkcipher_request *abreq = &pctx->abreq; u8 *auth_tag = pctx->auth_tag; u8 *iauth_tag = pctx->iauth_tag; @@ -352,8 +360,7 @@ static int crypto_gcm_init_tfm(struct crypto_tfm *tfm) ctx->ctr = ctr; ctx->gf128 = NULL; - align = max_t(unsigned long, crypto_ablkcipher_alignmask(ctr), - __alignof__(u32) - 1); + align = crypto_tfm_alg_alignmask(tfm); align &= ~(crypto_tfm_ctx_alignment() - 1); tfm->crt_aead.reqsize = align + sizeof(struct crypto_gcm_req_priv_ctx) + @@ -428,7 +435,7 @@ static struct crypto_instance *crypto_gcm_alloc(struct rtattr **tb) inst->alg.cra_flags = CRYPTO_ALG_TYPE_AEAD | CRYPTO_ALG_ASYNC; inst->alg.cra_priority = ctr->cra_priority; inst->alg.cra_blocksize = 16; - inst->alg.cra_alignmask = __alignof__(u32) - 1; + inst->alg.cra_alignmask = ctr->cra_alignmask | (__alignof__(u64) - 1); inst->alg.cra_type = &crypto_aead_type; inst->alg.cra_aead.ivsize = 12; inst->alg.cra_aead.maxauthsize = 16; -- cgit v1.2.3-59-g8ed1b From 653ebd9c8510a7d647ed23e66e1338f848ebdbab Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 27 Nov 2007 19:48:27 +0800 Subject: [CRYPTO] blkcipher: Merge ablkcipher and blkcipher into one option/module With the impending addition of the givcipher type, both blkcipher and ablkcipher algorithms will use it to create givcipher objects. As such it no longer makes sense to split the system between ablkcipher and blkcipher. In particular, both ablkcipher.c and blkcipher.c would need to use the givcipher type which has to reside in ablkcipher.c since it shares much code with it. This patch merges the two Kconfig options as well as the modules into one. Signed-off-by: Herbert Xu --- crypto/Kconfig | 6 +----- crypto/Makefile | 6 ++++-- drivers/crypto/Kconfig | 2 +- 3 files changed, 6 insertions(+), 8 deletions(-) diff --git a/crypto/Kconfig b/crypto/Kconfig index 1eb4bcdb344f..c4b6c9125582 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -24,10 +24,6 @@ config CRYPTO_ALGAPI help This option provides the API for cryptographic algorithms. -config CRYPTO_ABLKCIPHER - tristate - select CRYPTO_BLKCIPHER - config CRYPTO_AEAD tristate select CRYPTO_ALGAPI @@ -217,7 +213,7 @@ config CRYPTO_GCM config CRYPTO_CRYPTD tristate "Software async crypto daemon" - select CRYPTO_ABLKCIPHER + select CRYPTO_BLKCIPHER select CRYPTO_MANAGER help This is a generic software asynchronous crypto daemon that diff --git a/crypto/Makefile b/crypto/Makefile index 83532ac8466d..2a1883fabf42 100644 --- a/crypto/Makefile +++ b/crypto/Makefile @@ -8,9 +8,11 @@ crypto_algapi-$(CONFIG_PROC_FS) += proc.o crypto_algapi-objs := algapi.o scatterwalk.o $(crypto_algapi-y) obj-$(CONFIG_CRYPTO_ALGAPI) += crypto_algapi.o -obj-$(CONFIG_CRYPTO_ABLKCIPHER) += ablkcipher.o obj-$(CONFIG_CRYPTO_AEAD) += aead.o -obj-$(CONFIG_CRYPTO_BLKCIPHER) += blkcipher.o + +crypto_blkcipher-objs := ablkcipher.o +crypto_blkcipher-objs += blkcipher.o +obj-$(CONFIG_CRYPTO_BLKCIPHER) += crypto_blkcipher.o crypto_hash-objs := hash.o obj-$(CONFIG_CRYPTO_HASH) += crypto_hash.o diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig index d848e1b1624b..d8c70403b9da 100644 --- a/drivers/crypto/Kconfig +++ b/drivers/crypto/Kconfig @@ -87,7 +87,7 @@ config CRYPTO_DEV_HIFN_795X tristate "Driver HIFN 795x crypto accelerator chips" select CRYPTO_DES select CRYPTO_ALGAPI - select CRYPTO_ABLKCIPHER + select CRYPTO_BLKCIPHER depends on PCI help This option allows you to have support for HIFN 795x crypto adapters. -- cgit v1.2.3-59-g8ed1b From 5311f248b7764ba8b59e6d477355f766e5609686 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 17 Dec 2007 21:34:32 +0800 Subject: [CRYPTO] ctr: Refactor into ctr and rfc3686 As discussed previously, this patch moves the basic CTR functionality into a chainable algorithm called ctr. The IPsec-specific variant of it is now placed on top with the name rfc3686. So ctr(aes) gives a chainable cipher with IV size 16 while the IPsec variant will be called rfc3686(ctr(aes)). This patch also adjusts gcm accordingly. Signed-off-by: Herbert Xu --- crypto/ctr.c | 334 +++++++++++++++++++++++++++++++-------------------- crypto/gcm.c | 7 +- crypto/tcrypt.c | 8 +- include/crypto/ctr.h | 20 +++ 4 files changed, 233 insertions(+), 136 deletions(-) create mode 100644 include/crypto/ctr.h diff --git a/crypto/ctr.c b/crypto/ctr.c index 57da7d0affcb..1052b318aed2 100644 --- a/crypto/ctr.c +++ b/crypto/ctr.c @@ -11,6 +11,7 @@ */ #include +#include #include #include #include @@ -19,16 +20,13 @@ #include #include -struct ctr_instance_ctx { - struct crypto_spawn alg; - unsigned int noncesize; - unsigned int ivsize; - unsigned int countersize; -}; - struct crypto_ctr_ctx { struct crypto_cipher *child; - u8 *nonce; +}; + +struct crypto_rfc3686_ctx { + struct crypto_blkcipher *child; + u8 nonce[CTR_RFC3686_NONCE_SIZE]; }; static int crypto_ctr_setkey(struct crypto_tfm *parent, const u8 *key, @@ -36,18 +34,7 @@ static int crypto_ctr_setkey(struct crypto_tfm *parent, const u8 *key, { struct crypto_ctr_ctx *ctx = crypto_tfm_ctx(parent); struct crypto_cipher *child = ctx->child; - struct ctr_instance_ctx *ictx = - crypto_instance_ctx(crypto_tfm_alg_instance(parent)); - unsigned int noncelen = ictx->noncesize; - int err = 0; - - /* the nonce is stored in bytes at end of key */ - if (keylen < noncelen) - return -EINVAL; - - memcpy(ctx->nonce, key + (keylen - noncelen), noncelen); - - keylen -= noncelen; + int err; crypto_cipher_clear_flags(child, CRYPTO_TFM_REQ_MASK); crypto_cipher_set_flags(child, crypto_tfm_get_flags(parent) & @@ -60,11 +47,13 @@ static int crypto_ctr_setkey(struct crypto_tfm *parent, const u8 *key, } static void crypto_ctr_crypt_final(struct blkcipher_walk *walk, - struct crypto_cipher *tfm, u8 *ctrblk, - unsigned int countersize) + struct crypto_cipher *tfm) { unsigned int bsize = crypto_cipher_blocksize(tfm); - u8 *keystream = ctrblk + bsize; + unsigned long alignmask = crypto_cipher_alignmask(tfm); + u8 *ctrblk = walk->iv; + u8 tmp[bsize + alignmask]; + u8 *keystream = PTR_ALIGN(tmp + 0, alignmask + 1); u8 *src = walk->src.virt.addr; u8 *dst = walk->dst.virt.addr; unsigned int nbytes = walk->nbytes; @@ -72,15 +61,17 @@ static void crypto_ctr_crypt_final(struct blkcipher_walk *walk, crypto_cipher_encrypt_one(tfm, keystream, ctrblk); crypto_xor(keystream, src, nbytes); memcpy(dst, keystream, nbytes); + + crypto_inc(ctrblk, bsize); } static int crypto_ctr_crypt_segment(struct blkcipher_walk *walk, - struct crypto_cipher *tfm, u8 *ctrblk, - unsigned int countersize) + struct crypto_cipher *tfm) { void (*fn)(struct crypto_tfm *, u8 *, const u8 *) = crypto_cipher_alg(tfm)->cia_encrypt; unsigned int bsize = crypto_cipher_blocksize(tfm); + u8 *ctrblk = walk->iv; u8 *src = walk->src.virt.addr; u8 *dst = walk->dst.virt.addr; unsigned int nbytes = walk->nbytes; @@ -91,7 +82,7 @@ static int crypto_ctr_crypt_segment(struct blkcipher_walk *walk, crypto_xor(dst, src, bsize); /* increment counter in counterblock */ - crypto_inc(ctrblk + bsize - countersize, countersize); + crypto_inc(ctrblk, bsize); src += bsize; dst += bsize; @@ -101,15 +92,17 @@ static int crypto_ctr_crypt_segment(struct blkcipher_walk *walk, } static int crypto_ctr_crypt_inplace(struct blkcipher_walk *walk, - struct crypto_cipher *tfm, u8 *ctrblk, - unsigned int countersize) + struct crypto_cipher *tfm) { void (*fn)(struct crypto_tfm *, u8 *, const u8 *) = crypto_cipher_alg(tfm)->cia_encrypt; unsigned int bsize = crypto_cipher_blocksize(tfm); + unsigned long alignmask = crypto_cipher_alignmask(tfm); unsigned int nbytes = walk->nbytes; + u8 *ctrblk = walk->iv; u8 *src = walk->src.virt.addr; - u8 *keystream = ctrblk + bsize; + u8 tmp[bsize + alignmask]; + u8 *keystream = PTR_ALIGN(tmp + 0, alignmask + 1); do { /* create keystream */ @@ -117,7 +110,7 @@ static int crypto_ctr_crypt_inplace(struct blkcipher_walk *walk, crypto_xor(src, keystream, bsize); /* increment counter in counterblock */ - crypto_inc(ctrblk + bsize - countersize, countersize); + crypto_inc(ctrblk, bsize); src += bsize; } while ((nbytes -= bsize) >= bsize); @@ -134,41 +127,22 @@ static int crypto_ctr_crypt(struct blkcipher_desc *desc, struct crypto_ctr_ctx *ctx = crypto_blkcipher_ctx(tfm); struct crypto_cipher *child = ctx->child; unsigned int bsize = crypto_cipher_blocksize(child); - struct ctr_instance_ctx *ictx = - crypto_instance_ctx(crypto_tfm_alg_instance(&tfm->base)); - unsigned long alignmask = crypto_cipher_alignmask(child) | - (__alignof__(u32) - 1); - u8 cblk[bsize * 2 + alignmask]; - u8 *counterblk = (u8 *)ALIGN((unsigned long)cblk, alignmask + 1); int err; blkcipher_walk_init(&walk, dst, src, nbytes); err = blkcipher_walk_virt_block(desc, &walk, bsize); - /* set up counter block */ - memset(counterblk, 0 , bsize); - memcpy(counterblk, ctx->nonce, ictx->noncesize); - memcpy(counterblk + ictx->noncesize, walk.iv, ictx->ivsize); - - /* initialize counter portion of counter block */ - crypto_inc(counterblk + bsize - ictx->countersize, ictx->countersize); - while (walk.nbytes >= bsize) { if (walk.src.virt.addr == walk.dst.virt.addr) - nbytes = crypto_ctr_crypt_inplace(&walk, child, - counterblk, - ictx->countersize); + nbytes = crypto_ctr_crypt_inplace(&walk, child); else - nbytes = crypto_ctr_crypt_segment(&walk, child, - counterblk, - ictx->countersize); + nbytes = crypto_ctr_crypt_segment(&walk, child); err = blkcipher_walk_done(desc, &walk, nbytes); } if (walk.nbytes) { - crypto_ctr_crypt_final(&walk, child, counterblk, - ictx->countersize); + crypto_ctr_crypt_final(&walk, child); err = blkcipher_walk_done(desc, &walk, 0); } @@ -178,15 +152,11 @@ static int crypto_ctr_crypt(struct blkcipher_desc *desc, static int crypto_ctr_init_tfm(struct crypto_tfm *tfm) { struct crypto_instance *inst = (void *)tfm->__crt_alg; - struct ctr_instance_ctx *ictx = crypto_instance_ctx(inst); + struct crypto_spawn *spawn = crypto_instance_ctx(inst); struct crypto_ctr_ctx *ctx = crypto_tfm_ctx(tfm); struct crypto_cipher *cipher; - ctx->nonce = kzalloc(ictx->noncesize, GFP_KERNEL); - if (!ctx->nonce) - return -ENOMEM; - - cipher = crypto_spawn_cipher(&ictx->alg); + cipher = crypto_spawn_cipher(spawn); if (IS_ERR(cipher)) return PTR_ERR(cipher); @@ -199,7 +169,6 @@ static void crypto_ctr_exit_tfm(struct crypto_tfm *tfm) { struct crypto_ctr_ctx *ctx = crypto_tfm_ctx(tfm); - kfree(ctx->nonce); crypto_free_cipher(ctx->child); } @@ -207,10 +176,6 @@ static struct crypto_instance *crypto_ctr_alloc(struct rtattr **tb) { struct crypto_instance *inst; struct crypto_alg *alg; - struct ctr_instance_ctx *ictx; - unsigned int noncesize; - unsigned int ivsize; - unsigned int countersize; int err; err = crypto_check_attr_type(tb, CRYPTO_ALG_TYPE_BLKCIPHER); @@ -222,71 +187,28 @@ static struct crypto_instance *crypto_ctr_alloc(struct rtattr **tb) if (IS_ERR(alg)) return ERR_PTR(PTR_ERR(alg)); - err = crypto_attr_u32(tb[2], &noncesize); - if (err) - goto out_put_alg; - - err = crypto_attr_u32(tb[3], &ivsize); - if (err) - goto out_put_alg; - - err = crypto_attr_u32(tb[4], &countersize); - if (err) - goto out_put_alg; - - /* verify size of nonce + iv + counter - * counter must be >= 4 bytes. - */ + /* Block size must be >= 4 bytes. */ err = -EINVAL; - if (((noncesize + ivsize + countersize) < alg->cra_blocksize) || - ((noncesize + ivsize) > alg->cra_blocksize) || - (countersize > alg->cra_blocksize) || (countersize < 4)) + if (alg->cra_blocksize < 4) goto out_put_alg; /* If this is false we'd fail the alignment of crypto_inc. */ - if ((alg->cra_blocksize - countersize) % 4) + if (alg->cra_blocksize % 4) goto out_put_alg; - inst = kzalloc(sizeof(*inst) + sizeof(*ictx), GFP_KERNEL); - err = -ENOMEM; - if (!inst) - goto out_put_alg; - - err = -ENAMETOOLONG; - if (snprintf(inst->alg.cra_name, CRYPTO_MAX_ALG_NAME, - "ctr(%s,%u,%u,%u)", alg->cra_name, noncesize, - ivsize, countersize) >= CRYPTO_MAX_ALG_NAME) { - goto err_free_inst; - } - - if (snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME, - "ctr(%s,%u,%u,%u)", alg->cra_driver_name, noncesize, - ivsize, countersize) >= CRYPTO_MAX_ALG_NAME) { - goto err_free_inst; - } - - ictx = crypto_instance_ctx(inst); - ictx->noncesize = noncesize; - ictx->ivsize = ivsize; - ictx->countersize = countersize; - - err = crypto_init_spawn(&ictx->alg, alg, inst, - CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_ASYNC); - if (err) - goto err_free_inst; + inst = crypto_alloc_instance("ctr", alg); + if (IS_ERR(inst)) + goto out; - err = 0; inst->alg.cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER; inst->alg.cra_priority = alg->cra_priority; inst->alg.cra_blocksize = 1; inst->alg.cra_alignmask = alg->cra_alignmask | (__alignof__(u32) - 1); inst->alg.cra_type = &crypto_blkcipher_type; - inst->alg.cra_blkcipher.ivsize = ivsize; - inst->alg.cra_blkcipher.min_keysize = alg->cra_cipher.cia_min_keysize - + noncesize; - inst->alg.cra_blkcipher.max_keysize = alg->cra_cipher.cia_max_keysize - + noncesize; + inst->alg.cra_blkcipher.ivsize = alg->cra_blocksize; + inst->alg.cra_blkcipher.min_keysize = alg->cra_cipher.cia_min_keysize; + inst->alg.cra_blkcipher.max_keysize = alg->cra_cipher.cia_max_keysize; inst->alg.cra_ctxsize = sizeof(struct crypto_ctr_ctx); @@ -297,24 +219,18 @@ static struct crypto_instance *crypto_ctr_alloc(struct rtattr **tb) inst->alg.cra_blkcipher.encrypt = crypto_ctr_crypt; inst->alg.cra_blkcipher.decrypt = crypto_ctr_crypt; -err_free_inst: - if (err) - kfree(inst); - -out_put_alg: +out: crypto_mod_put(alg); - - if (err) - inst = ERR_PTR(err); - return inst; + +out_put_alg: + inst = ERR_PTR(err); + goto out; } static void crypto_ctr_free(struct crypto_instance *inst) { - struct ctr_instance_ctx *ictx = crypto_instance_ctx(inst); - - crypto_drop_spawn(&ictx->alg); + crypto_drop_spawn(crypto_instance_ctx(inst)); kfree(inst); } @@ -325,13 +241,174 @@ static struct crypto_template crypto_ctr_tmpl = { .module = THIS_MODULE, }; +static int crypto_rfc3686_setkey(struct crypto_tfm *parent, const u8 *key, + unsigned int keylen) +{ + struct crypto_rfc3686_ctx *ctx = crypto_tfm_ctx(parent); + struct crypto_blkcipher *child = ctx->child; + int err; + + /* the nonce is stored in bytes at end of key */ + if (keylen < CTR_RFC3686_NONCE_SIZE) + return -EINVAL; + + memcpy(ctx->nonce, key + (keylen - CTR_RFC3686_NONCE_SIZE), + CTR_RFC3686_NONCE_SIZE); + + keylen -= CTR_RFC3686_NONCE_SIZE; + + crypto_blkcipher_clear_flags(child, CRYPTO_TFM_REQ_MASK); + crypto_blkcipher_set_flags(child, crypto_tfm_get_flags(parent) & + CRYPTO_TFM_REQ_MASK); + err = crypto_blkcipher_setkey(child, key, keylen); + crypto_tfm_set_flags(parent, crypto_blkcipher_get_flags(child) & + CRYPTO_TFM_RES_MASK); + + return err; +} + +static int crypto_rfc3686_crypt(struct blkcipher_desc *desc, + struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct crypto_blkcipher *tfm = desc->tfm; + struct crypto_rfc3686_ctx *ctx = crypto_blkcipher_ctx(tfm); + struct crypto_blkcipher *child = ctx->child; + unsigned long alignmask = crypto_blkcipher_alignmask(tfm); + u8 ivblk[CTR_RFC3686_BLOCK_SIZE + alignmask]; + u8 *iv = PTR_ALIGN(ivblk + 0, alignmask + 1); + u8 *info = desc->info; + int err; + + /* set up counter block */ + memcpy(iv, ctx->nonce, CTR_RFC3686_NONCE_SIZE); + memcpy(iv + CTR_RFC3686_NONCE_SIZE, info, CTR_RFC3686_IV_SIZE); + + /* initialize counter portion of counter block */ + *(__be32 *)(iv + CTR_RFC3686_NONCE_SIZE + CTR_RFC3686_IV_SIZE) = + cpu_to_be32(1); + + desc->tfm = child; + desc->info = iv; + err = crypto_blkcipher_encrypt_iv(desc, dst, src, nbytes); + desc->tfm = tfm; + desc->info = info; + + return err; +} + +static int crypto_rfc3686_init_tfm(struct crypto_tfm *tfm) +{ + struct crypto_instance *inst = (void *)tfm->__crt_alg; + struct crypto_spawn *spawn = crypto_instance_ctx(inst); + struct crypto_rfc3686_ctx *ctx = crypto_tfm_ctx(tfm); + struct crypto_blkcipher *cipher; + + cipher = crypto_spawn_blkcipher(spawn); + if (IS_ERR(cipher)) + return PTR_ERR(cipher); + + ctx->child = cipher; + + return 0; +} + +static void crypto_rfc3686_exit_tfm(struct crypto_tfm *tfm) +{ + struct crypto_rfc3686_ctx *ctx = crypto_tfm_ctx(tfm); + + crypto_free_blkcipher(ctx->child); +} + +static struct crypto_instance *crypto_rfc3686_alloc(struct rtattr **tb) +{ + struct crypto_instance *inst; + struct crypto_alg *alg; + int err; + + err = crypto_check_attr_type(tb, CRYPTO_ALG_TYPE_BLKCIPHER); + if (err) + return ERR_PTR(err); + + alg = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_BLKCIPHER, + CRYPTO_ALG_TYPE_MASK); + err = PTR_ERR(alg); + if (IS_ERR(alg)) + return ERR_PTR(err); + + /* We only support 16-byte blocks. */ + err = -EINVAL; + if (alg->cra_blkcipher.ivsize != CTR_RFC3686_BLOCK_SIZE) + goto out_put_alg; + + /* Not a stream cipher? */ + if (alg->cra_blocksize != 1) + goto out_put_alg; + + inst = crypto_alloc_instance("rfc3686", alg); + if (IS_ERR(inst)) + goto out; + + inst->alg.cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER; + inst->alg.cra_priority = alg->cra_priority; + inst->alg.cra_blocksize = 1; + inst->alg.cra_alignmask = alg->cra_alignmask; + inst->alg.cra_type = &crypto_blkcipher_type; + + inst->alg.cra_blkcipher.ivsize = CTR_RFC3686_IV_SIZE; + inst->alg.cra_blkcipher.min_keysize = alg->cra_blkcipher.min_keysize + + CTR_RFC3686_NONCE_SIZE; + inst->alg.cra_blkcipher.max_keysize = alg->cra_blkcipher.max_keysize + + CTR_RFC3686_NONCE_SIZE; + + inst->alg.cra_ctxsize = sizeof(struct crypto_rfc3686_ctx); + + inst->alg.cra_init = crypto_rfc3686_init_tfm; + inst->alg.cra_exit = crypto_rfc3686_exit_tfm; + + inst->alg.cra_blkcipher.setkey = crypto_rfc3686_setkey; + inst->alg.cra_blkcipher.encrypt = crypto_rfc3686_crypt; + inst->alg.cra_blkcipher.decrypt = crypto_rfc3686_crypt; + +out: + crypto_mod_put(alg); + return inst; + +out_put_alg: + inst = ERR_PTR(err); + goto out; +} + +static struct crypto_template crypto_rfc3686_tmpl = { + .name = "rfc3686", + .alloc = crypto_rfc3686_alloc, + .free = crypto_ctr_free, + .module = THIS_MODULE, +}; + static int __init crypto_ctr_module_init(void) { - return crypto_register_template(&crypto_ctr_tmpl); + int err; + + err = crypto_register_template(&crypto_ctr_tmpl); + if (err) + goto out; + + err = crypto_register_template(&crypto_rfc3686_tmpl); + if (err) + goto out_drop_ctr; + +out: + return err; + +out_drop_ctr: + crypto_unregister_template(&crypto_ctr_tmpl); + goto out; } static void __exit crypto_ctr_module_exit(void) { + crypto_unregister_template(&crypto_rfc3686_tmpl); crypto_unregister_template(&crypto_ctr_tmpl); } @@ -340,3 +417,4 @@ module_exit(crypto_ctr_module_exit); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("CTR Counter block mode"); +MODULE_ALIAS("rfc3686"); diff --git a/crypto/gcm.c b/crypto/gcm.c index 08183171913c..c54d478948a0 100644 --- a/crypto/gcm.c +++ b/crypto/gcm.c @@ -160,7 +160,7 @@ static void crypto_gcm_ghash_final_xor(struct crypto_gcm_ghash_ctx *ctx, static inline void crypto_gcm_set_counter(u8 *counterblock, u32 value) { - *((u32 *)&counterblock[12]) = cpu_to_be32(value); + *((u32 *)&counterblock[12]) = cpu_to_be32(value + 1); } static int crypto_gcm_encrypt_counter(struct crypto_aead *aead, u8 *block, @@ -400,9 +400,8 @@ static struct crypto_instance *crypto_gcm_alloc(struct rtattr **tb) return inst; inst = ERR_PTR(ENAMETOOLONG); - if (snprintf( - ctr_name, CRYPTO_MAX_ALG_NAME, - "ctr(%s,0,16,4)", cipher->cra_name) >= CRYPTO_MAX_ALG_NAME) + if (snprintf(ctr_name, CRYPTO_MAX_ALG_NAME, "ctr(%s)", + cipher->cra_name) >= CRYPTO_MAX_ALG_NAME) return inst; ctr = crypto_alg_mod_lookup(ctr_name, CRYPTO_ALG_TYPE_BLKCIPHER, diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c index 0cfb8ebb22ba..1142b4998c84 100644 --- a/crypto/tcrypt.c +++ b/crypto/tcrypt.c @@ -1193,9 +1193,9 @@ static void do_test(void) AES_XTS_ENC_TEST_VECTORS); test_cipher("xts(aes)", DECRYPT, aes_xts_dec_tv_template, AES_XTS_DEC_TEST_VECTORS); - test_cipher("ctr(aes,4,8,4)", ENCRYPT, aes_ctr_enc_tv_template, + test_cipher("rfc3686(ctr(aes))", ENCRYPT, aes_ctr_enc_tv_template, AES_CTR_ENC_TEST_VECTORS); - test_cipher("ctr(aes,4,8,4)", DECRYPT, aes_ctr_dec_tv_template, + test_cipher("rfc3686(ctr(aes))", DECRYPT, aes_ctr_dec_tv_template, AES_CTR_DEC_TEST_VECTORS); test_aead("gcm(aes)", ENCRYPT, aes_gcm_enc_tv_template, AES_GCM_ENC_TEST_VECTORS); @@ -1394,9 +1394,9 @@ static void do_test(void) AES_XTS_ENC_TEST_VECTORS); test_cipher("xts(aes)", DECRYPT, aes_xts_dec_tv_template, AES_XTS_DEC_TEST_VECTORS); - test_cipher("ctr(aes,4,8,4)", ENCRYPT, aes_ctr_enc_tv_template, + test_cipher("rfc3686(ctr(aes))", ENCRYPT, aes_ctr_enc_tv_template, AES_CTR_ENC_TEST_VECTORS); - test_cipher("ctr(aes,4,8,4)", DECRYPT, aes_ctr_dec_tv_template, + test_cipher("rfc3686(ctr(aes))", DECRYPT, aes_ctr_dec_tv_template, AES_CTR_DEC_TEST_VECTORS); break; diff --git a/include/crypto/ctr.h b/include/crypto/ctr.h new file mode 100644 index 000000000000..4180fc080e3b --- /dev/null +++ b/include/crypto/ctr.h @@ -0,0 +1,20 @@ +/* + * CTR: Counter mode + * + * Copyright (c) 2007 Herbert Xu + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ + +#ifndef _CRYPTO_CTR_H +#define _CRYPTO_CTR_H + +#define CTR_RFC3686_NONCE_SIZE 4 +#define CTR_RFC3686_IV_SIZE 8 +#define CTR_RFC3686_BLOCK_SIZE 16 + +#endif /* _CRYPTO_CTR_H */ -- cgit v1.2.3-59-g8ed1b From 84c911523020a2e39b307a2da26ee1886b7214fe Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 17 Dec 2007 21:42:08 +0800 Subject: [CRYPTO] gcm: Add support for async ciphers This patch adds the necessary changes for GCM to be used with async ciphers. This would allow it to be used with hardware devices that support CTR. Signed-off-by: Herbert Xu --- crypto/gcm.c | 190 +++++++++++++++++++++++++++++++++++------------------------ 1 file changed, 112 insertions(+), 78 deletions(-) diff --git a/crypto/gcm.c b/crypto/gcm.c index c54d478948a0..f6bee6f209a6 100644 --- a/crypto/gcm.c +++ b/crypto/gcm.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include @@ -38,11 +39,17 @@ struct crypto_gcm_ghash_ctx { struct crypto_gcm_req_priv_ctx { u8 auth_tag[16]; u8 iauth_tag[16]; - u8 counter[16]; + struct scatterlist src[2]; + struct scatterlist dst[2]; struct crypto_gcm_ghash_ctx ghash; struct ablkcipher_request abreq; }; +struct crypto_gcm_setkey_result { + int err; + struct completion completion; +}; + static inline struct crypto_gcm_req_priv_ctx *crypto_gcm_reqctx( struct aead_request *req) { @@ -158,33 +165,15 @@ static void crypto_gcm_ghash_final_xor(struct crypto_gcm_ghash_ctx *ctx, crypto_xor(dst, buf, 16); } -static inline void crypto_gcm_set_counter(u8 *counterblock, u32 value) +static void crypto_gcm_setkey_done(struct crypto_async_request *req, int err) { - *((u32 *)&counterblock[12]) = cpu_to_be32(value + 1); -} + struct crypto_gcm_setkey_result *result = req->data; -static int crypto_gcm_encrypt_counter(struct crypto_aead *aead, u8 *block, - u32 value, const u8 *iv) -{ - struct crypto_gcm_ctx *ctx = crypto_aead_ctx(aead); - struct crypto_ablkcipher *ctr = ctx->ctr; - struct ablkcipher_request req; - struct scatterlist sg; - u8 counterblock[16]; - - if (iv == NULL) - memset(counterblock, 0, 12); - else - memcpy(counterblock, iv, 12); - - crypto_gcm_set_counter(counterblock, value); - - sg_init_one(&sg, block, 16); - ablkcipher_request_set_tfm(&req, ctr); - ablkcipher_request_set_crypt(&req, &sg, &sg, 16, counterblock); - ablkcipher_request_set_callback(&req, 0, NULL, NULL); - memset(block, 0, 16); - return crypto_ablkcipher_encrypt(&req); + if (err == -EINPROGRESS) + return; + + result->err = err; + complete(&result->completion); } static int crypto_gcm_setkey(struct crypto_aead *aead, const u8 *key, @@ -192,10 +181,16 @@ static int crypto_gcm_setkey(struct crypto_aead *aead, const u8 *key, { struct crypto_gcm_ctx *ctx = crypto_aead_ctx(aead); struct crypto_ablkcipher *ctr = ctx->ctr; - int alignmask = crypto_ablkcipher_alignmask(ctr); - u8 alignbuf[16+alignmask]; - u8 *hash = (u8 *)ALIGN((unsigned long)alignbuf, alignmask+1); - int err = 0; + struct { + be128 hash; + u8 iv[8]; + + struct crypto_gcm_setkey_result result; + + struct scatterlist sg[1]; + struct ablkcipher_request req; + } *data; + int err; crypto_ablkcipher_clear_flags(ctr, CRYPTO_TFM_REQ_MASK); crypto_ablkcipher_set_flags(ctr, crypto_aead_get_flags(aead) & @@ -203,62 +198,86 @@ static int crypto_gcm_setkey(struct crypto_aead *aead, const u8 *key, err = crypto_ablkcipher_setkey(ctr, key, keylen); if (err) - goto out; + return err; crypto_aead_set_flags(aead, crypto_ablkcipher_get_flags(ctr) & CRYPTO_TFM_RES_MASK); - err = crypto_gcm_encrypt_counter(aead, hash, -1, NULL); + data = kzalloc(sizeof(*data) + crypto_ablkcipher_reqsize(ctr), + GFP_KERNEL); + if (!data) + return -ENOMEM; + + init_completion(&data->result.completion); + sg_init_one(data->sg, &data->hash, sizeof(data->hash)); + ablkcipher_request_set_tfm(&data->req, ctr); + ablkcipher_request_set_callback(&data->req, CRYPTO_TFM_REQ_MAY_SLEEP | + CRYPTO_TFM_REQ_MAY_BACKLOG, + crypto_gcm_setkey_done, + &data->result); + ablkcipher_request_set_crypt(&data->req, data->sg, data->sg, + sizeof(data->hash), data->iv); + + err = crypto_ablkcipher_encrypt(&data->req); + if (err == -EINPROGRESS || err == -EBUSY) { + err = wait_for_completion_interruptible( + &data->result.completion); + if (!err) + err = data->result.err; + } + if (err) goto out; if (ctx->gf128 != NULL) gf128mul_free_4k(ctx->gf128); - ctx->gf128 = gf128mul_init_4k_lle((be128 *)hash); + ctx->gf128 = gf128mul_init_4k_lle(&data->hash); if (ctx->gf128 == NULL) err = -ENOMEM; - out: +out: + kfree(data); return err; } -static int crypto_gcm_init_crypt(struct ablkcipher_request *ablk_req, - struct aead_request *req, - unsigned int cryptlen, - void (*done)(struct crypto_async_request *, - int)) +static void crypto_gcm_init_crypt(struct ablkcipher_request *ablk_req, + struct aead_request *req, + unsigned int cryptlen) { struct crypto_aead *aead = crypto_aead_reqtfm(req); struct crypto_gcm_ctx *ctx = crypto_aead_ctx(aead); struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req); u32 flags = req->base.tfm->crt_flags; - u8 *auth_tag = pctx->auth_tag; - u8 *counter = pctx->counter; struct crypto_gcm_ghash_ctx *ghash = &pctx->ghash; - int err = 0; + struct scatterlist *dst; + __be32 counter = cpu_to_be32(1); + + memset(pctx->auth_tag, 0, sizeof(pctx->auth_tag)); + memcpy(req->iv + 12, &counter, 4); + + sg_init_table(pctx->src, 2); + sg_set_buf(pctx->src, pctx->auth_tag, sizeof(pctx->auth_tag)); + scatterwalk_sg_chain(pctx->src, 2, req->src); + + dst = pctx->src; + if (req->src != req->dst) { + sg_init_table(pctx->dst, 2); + sg_set_buf(pctx->dst, pctx->auth_tag, sizeof(pctx->auth_tag)); + scatterwalk_sg_chain(pctx->dst, 2, req->dst); + dst = pctx->dst; + } ablkcipher_request_set_tfm(ablk_req, ctx->ctr); - ablkcipher_request_set_callback(ablk_req, aead_request_flags(req), - done, req); - ablkcipher_request_set_crypt(ablk_req, req->src, req->dst, - cryptlen, counter); - - err = crypto_gcm_encrypt_counter(aead, auth_tag, 0, req->iv); - if (err) - goto out; - - memcpy(counter, req->iv, 12); - crypto_gcm_set_counter(counter, 1); + ablkcipher_request_set_crypt(ablk_req, pctx->src, dst, + cryptlen + sizeof(pctx->auth_tag), + req->iv); crypto_gcm_ghash_init(ghash, flags, ctx->gf128); crypto_gcm_ghash_update_sg(ghash, req->assoc, req->assoclen); crypto_gcm_ghash_flush(ghash); - - out: - return err; } static int crypto_gcm_hash(struct aead_request *req) @@ -291,25 +310,44 @@ static int crypto_gcm_encrypt(struct aead_request *req) { struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req); struct ablkcipher_request *abreq = &pctx->abreq; - int err = 0; + int err; + + crypto_gcm_init_crypt(abreq, req, req->cryptlen); + ablkcipher_request_set_callback(abreq, aead_request_flags(req), + crypto_gcm_encrypt_done, req); - err = crypto_gcm_init_crypt(abreq, req, req->cryptlen, - crypto_gcm_encrypt_done); + err = crypto_ablkcipher_encrypt(abreq); if (err) return err; - if (req->cryptlen) { - err = crypto_ablkcipher_encrypt(abreq); - if (err) - return err; - } - return crypto_gcm_hash(req); } +static int crypto_gcm_verify(struct aead_request *req) +{ + struct crypto_aead *aead = crypto_aead_reqtfm(req); + struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req); + struct crypto_gcm_ghash_ctx *ghash = &pctx->ghash; + u8 *auth_tag = pctx->auth_tag; + u8 *iauth_tag = pctx->iauth_tag; + unsigned int authsize = crypto_aead_authsize(aead); + unsigned int cryptlen = req->cryptlen - authsize; + + crypto_gcm_ghash_final_xor(ghash, req->assoclen, cryptlen, auth_tag); + + authsize = crypto_aead_authsize(aead); + scatterwalk_map_and_copy(iauth_tag, req->src, cryptlen, authsize, 0); + return memcmp(iauth_tag, auth_tag, authsize) ? -EBADMSG : 0; +} + static void crypto_gcm_decrypt_done(struct crypto_async_request *areq, int err) { - aead_request_complete(areq->data, err); + struct aead_request *req = areq->data; + + if (!err) + err = crypto_gcm_verify(req); + + aead_request_complete(req, err); } static int crypto_gcm_decrypt(struct aead_request *req) @@ -317,8 +355,6 @@ static int crypto_gcm_decrypt(struct aead_request *req) struct crypto_aead *aead = crypto_aead_reqtfm(req); struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req); struct ablkcipher_request *abreq = &pctx->abreq; - u8 *auth_tag = pctx->auth_tag; - u8 *iauth_tag = pctx->iauth_tag; struct crypto_gcm_ghash_ctx *ghash = &pctx->ghash; unsigned int cryptlen = req->cryptlen; unsigned int authsize = crypto_aead_authsize(aead); @@ -328,19 +364,17 @@ static int crypto_gcm_decrypt(struct aead_request *req) return -EINVAL; cryptlen -= authsize; - err = crypto_gcm_init_crypt(abreq, req, cryptlen, - crypto_gcm_decrypt_done); - if (err) - return err; + crypto_gcm_init_crypt(abreq, req, cryptlen); + ablkcipher_request_set_callback(abreq, aead_request_flags(req), + crypto_gcm_decrypt_done, req); crypto_gcm_ghash_update_sg(ghash, req->src, cryptlen); - crypto_gcm_ghash_final_xor(ghash, req->assoclen, cryptlen, auth_tag); - scatterwalk_map_and_copy(iauth_tag, req->src, cryptlen, authsize, 0); - if (memcmp(iauth_tag, auth_tag, authsize)) - return -EBADMSG; + err = crypto_ablkcipher_decrypt(abreq); + if (err) + return err; - return crypto_ablkcipher_decrypt(abreq); + return crypto_gcm_verify(req); } static int crypto_gcm_init_tfm(struct crypto_tfm *tfm) @@ -436,7 +470,7 @@ static struct crypto_instance *crypto_gcm_alloc(struct rtattr **tb) inst->alg.cra_blocksize = 16; inst->alg.cra_alignmask = ctr->cra_alignmask | (__alignof__(u64) - 1); inst->alg.cra_type = &crypto_aead_type; - inst->alg.cra_aead.ivsize = 12; + inst->alg.cra_aead.ivsize = 16; inst->alg.cra_aead.maxauthsize = 16; inst->alg.cra_ctxsize = sizeof(struct crypto_gcm_ctx); inst->alg.cra_init = crypto_gcm_init_tfm; -- cgit v1.2.3-59-g8ed1b From 378f4f51f9fdd8df80ea875320e2bf1d7c6e6e77 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 17 Dec 2007 20:07:31 +0800 Subject: [CRYPTO] skcipher: Add crypto_grab_skcipher interface Note: From now on the collective of ablkcipher/blkcipher/givcipher will be known as skcipher, i.e., symmetric key cipher. The name blkcipher has always been much of a misnomer since it supports stream ciphers too. This patch adds the function crypto_grab_skcipher as a new way of getting an ablkcipher spawn. The problem is that previously we did this in two steps, first getting the algorithm and then calling crypto_init_spawn. This meant that each spawn user had to be aware of what type and mask to use for these two steps. This is difficult and also presents a problem when the type/mask changes as they're about to be for IV generators. The new interface does both steps together just like crypto_alloc_ablkcipher. As a side-effect this also allows us to be stronger on type enforcement for spawns. For now this is only done for ablkcipher but it's trivial to extend for other types. This patch also moves the type/mask logic for skcipher into the helpers crypto_skcipher_type and crypto_skcipher_mask. Finally this patch introduces the function crypto_require_sync to determine whether the user is specifically requesting a sync algorithm. Signed-off-by: Herbert Xu --- crypto/ablkcipher.c | 25 +++++++++++++++++-- include/crypto/algapi.h | 22 +++++++++++++--- include/crypto/internal/skcipher.h | 51 ++++++++++++++++++++++++++++++++++++++ include/linux/crypto.h | 26 +++++++++++-------- 4 files changed, 108 insertions(+), 16 deletions(-) create mode 100644 include/crypto/internal/skcipher.h diff --git a/crypto/ablkcipher.c b/crypto/ablkcipher.c index 2731acb86e7d..0083140304d2 100644 --- a/crypto/ablkcipher.c +++ b/crypto/ablkcipher.c @@ -13,14 +13,16 @@ * */ -#include -#include +#include +#include #include #include #include #include #include +#include "internal.h" + static int setkey_unaligned(struct crypto_ablkcipher *tfm, const u8 *key, unsigned int keylen) { @@ -105,5 +107,24 @@ const struct crypto_type crypto_ablkcipher_type = { }; EXPORT_SYMBOL_GPL(crypto_ablkcipher_type); +int crypto_grab_skcipher(struct crypto_skcipher_spawn *spawn, const char *name, + u32 type, u32 mask) +{ + struct crypto_alg *alg; + int err; + + type = crypto_skcipher_type(type); + mask = crypto_skcipher_mask(mask); + + alg = crypto_alg_mod_lookup(name, type, mask); + if (IS_ERR(alg)) + return PTR_ERR(alg); + + err = crypto_init_spawn(&spawn->base, alg, spawn->base.inst, mask); + crypto_mod_put(alg); + return err; +} +EXPORT_SYMBOL_GPL(crypto_grab_skcipher); + MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Asynchronous block chaining cipher type"); diff --git a/include/crypto/algapi.h b/include/crypto/algapi.h index 726a765e5ec6..fda1759ffe2d 100644 --- a/include/crypto/algapi.h +++ b/include/crypto/algapi.h @@ -111,6 +111,12 @@ void crypto_drop_spawn(struct crypto_spawn *spawn); struct crypto_tfm *crypto_spawn_tfm(struct crypto_spawn *spawn, u32 type, u32 mask); +static inline void crypto_set_spawn(struct crypto_spawn *spawn, + struct crypto_instance *inst) +{ + spawn->inst = inst; +} + struct crypto_attr_type *crypto_get_attr_type(struct rtattr **tb); int crypto_check_attr_type(struct rtattr **tb, u32 type); const char *crypto_attr_alg_name(struct rtattr *rta); @@ -195,10 +201,9 @@ static inline struct crypto_instance *crypto_aead_alg_instance( static inline struct crypto_ablkcipher *crypto_spawn_ablkcipher( struct crypto_spawn *spawn) { - u32 type = CRYPTO_ALG_TYPE_BLKCIPHER; - u32 mask = CRYPTO_ALG_TYPE_BLKCIPHER_MASK; - - return __crypto_ablkcipher_cast(crypto_spawn_tfm(spawn, type, mask)); + return __crypto_ablkcipher_cast( + crypto_spawn_tfm(spawn, crypto_skcipher_type(0), + crypto_skcipher_mask(0))); } static inline struct crypto_blkcipher *crypto_spawn_blkcipher( @@ -308,5 +313,14 @@ static inline struct crypto_alg *crypto_get_attr_alg(struct rtattr **tb, return crypto_attr_alg(tb[1], type, mask); } +/* + * Returns CRYPTO_ALG_ASYNC if type/mask requires the use of sync algorithms. + * Otherwise returns zero. + */ +static inline int crypto_requires_sync(u32 type, u32 mask) +{ + return (type ^ CRYPTO_ALG_ASYNC) & mask & CRYPTO_ALG_ASYNC; +} + #endif /* _CRYPTO_ALGAPI_H */ diff --git a/include/crypto/internal/skcipher.h b/include/crypto/internal/skcipher.h new file mode 100644 index 000000000000..87879e64ff4c --- /dev/null +++ b/include/crypto/internal/skcipher.h @@ -0,0 +1,51 @@ +/* + * Symmetric key ciphers. + * + * Copyright (c) 2007 Herbert Xu + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ + +#ifndef _CRYPTO_INTERNAL_SKCIPHER_H +#define _CRYPTO_INTERNAL_SKCIPHER_H + +#include + +struct crypto_skcipher_spawn { + struct crypto_spawn base; +}; + +static inline void crypto_set_skcipher_spawn( + struct crypto_skcipher_spawn *spawn, struct crypto_instance *inst) +{ + crypto_set_spawn(&spawn->base, inst); +} + +int crypto_grab_skcipher(struct crypto_skcipher_spawn *spawn, const char *name, + u32 type, u32 mask); + +static inline void crypto_drop_skcipher(struct crypto_skcipher_spawn *spawn) +{ + crypto_drop_spawn(&spawn->base); +} + +static inline struct crypto_alg *crypto_skcipher_spawn_alg( + struct crypto_skcipher_spawn *spawn) +{ + return spawn->base.alg; +} + +static inline struct crypto_ablkcipher *crypto_spawn_skcipher( + struct crypto_skcipher_spawn *spawn) +{ + return __crypto_ablkcipher_cast( + crypto_spawn_tfm(&spawn->base, crypto_skcipher_type(0), + crypto_skcipher_mask(0))); +} + +#endif /* _CRYPTO_INTERNAL_SKCIPHER_H */ + diff --git a/include/linux/crypto.h b/include/linux/crypto.h index ef7642ed3e42..d6962b409489 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -528,16 +528,26 @@ static inline struct crypto_ablkcipher *__crypto_ablkcipher_cast( return (struct crypto_ablkcipher *)tfm; } -static inline struct crypto_ablkcipher *crypto_alloc_ablkcipher( - const char *alg_name, u32 type, u32 mask) +static inline u32 crypto_skcipher_type(u32 type) { type &= ~CRYPTO_ALG_TYPE_MASK; - mask &= ~CRYPTO_ALG_TYPE_MASK; type |= CRYPTO_ALG_TYPE_BLKCIPHER; + return type; +} + +static inline u32 crypto_skcipher_mask(u32 mask) +{ + mask &= ~CRYPTO_ALG_TYPE_MASK; mask |= CRYPTO_ALG_TYPE_BLKCIPHER_MASK; + return mask; +} +static inline struct crypto_ablkcipher *crypto_alloc_ablkcipher( + const char *alg_name, u32 type, u32 mask) +{ return __crypto_ablkcipher_cast( - crypto_alloc_base(alg_name, type, mask)); + crypto_alloc_base(alg_name, crypto_skcipher_type(type), + crypto_skcipher_mask(mask))); } static inline struct crypto_tfm *crypto_ablkcipher_tfm( @@ -554,12 +564,8 @@ static inline void crypto_free_ablkcipher(struct crypto_ablkcipher *tfm) static inline int crypto_has_ablkcipher(const char *alg_name, u32 type, u32 mask) { - type &= ~CRYPTO_ALG_TYPE_MASK; - mask &= ~CRYPTO_ALG_TYPE_MASK; - type |= CRYPTO_ALG_TYPE_BLKCIPHER; - mask |= CRYPTO_ALG_TYPE_BLKCIPHER_MASK; - - return crypto_has_alg(alg_name, type, mask); + return crypto_has_alg(alg_name, crypto_skcipher_type(type), + crypto_skcipher_mask(mask)); } static inline struct ablkcipher_tfm *crypto_ablkcipher_crt( -- cgit v1.2.3-59-g8ed1b From 61da88e2b800eed2b03834a73c46cc89ad48716d Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 17 Dec 2007 21:51:27 +0800 Subject: [CRYPTO] skcipher: Add givcrypt operations and givcipher type Different block cipher modes have different requirements for intialisation vectors. For example, CBC can use a simple randomly generated IV while modes such as CTR must use an IV generation mechanisms that give a stronger guarantee on the lack of collisions. Furthermore, disk encryption modes have their own IV generation algorithms. Up until now IV generation has been left to the users of the symmetric key cipher API. This is inconvenient as the number of block cipher modes increase because the user needs to be aware of which mode is supposed to be paired with which IV generation algorithm. Therefore it makes sense to integrate the IV generation into the crypto API. This patch takes the first step in that direction by creating two new ablkcipher operations, givencrypt and givdecrypt that generates an IV before performing the actual encryption or decryption. The operations are currently not exposed to the user. That will be done once the underlying functionality has actually been implemented. It also creates the underlying givcipher type. Algorithms that directly generate IVs would use it instead of ablkcipher. All other algorithms (including all existing ones) would generate a givcipher algorithm upon registration. This givcipher algorithm will be constructed from the geniv string that's stored in every algorithm. That string will locate a template which is instantiated by the blkcipher/ablkcipher algorithm in question to give a givcipher algorithm. Signed-off-by: Herbert Xu --- crypto/ablkcipher.c | 46 ++++++++++++++++++++++++++++++++++++++ include/crypto/internal/skcipher.h | 9 ++++++++ include/crypto/skcipher.h | 38 +++++++++++++++++++++++++++++++ include/linux/crypto.h | 7 ++++++ 4 files changed, 100 insertions(+) create mode 100644 include/crypto/skcipher.h diff --git a/crypto/ablkcipher.c b/crypto/ablkcipher.c index 0083140304d2..e403d8137ecd 100644 --- a/crypto/ablkcipher.c +++ b/crypto/ablkcipher.c @@ -107,6 +107,52 @@ const struct crypto_type crypto_ablkcipher_type = { }; EXPORT_SYMBOL_GPL(crypto_ablkcipher_type); +static int no_givdecrypt(struct skcipher_givcrypt_request *req) +{ + return -ENOSYS; +} + +static int crypto_init_givcipher_ops(struct crypto_tfm *tfm, u32 type, + u32 mask) +{ + struct ablkcipher_alg *alg = &tfm->__crt_alg->cra_ablkcipher; + struct ablkcipher_tfm *crt = &tfm->crt_ablkcipher; + + if (alg->ivsize > PAGE_SIZE / 8) + return -EINVAL; + + crt->setkey = setkey; + crt->encrypt = alg->encrypt; + crt->decrypt = alg->decrypt; + crt->givencrypt = alg->givencrypt; + crt->givdecrypt = alg->givdecrypt ?: no_givdecrypt; + crt->ivsize = alg->ivsize; + + return 0; +} + +static void crypto_givcipher_show(struct seq_file *m, struct crypto_alg *alg) + __attribute__ ((unused)); +static void crypto_givcipher_show(struct seq_file *m, struct crypto_alg *alg) +{ + struct ablkcipher_alg *ablkcipher = &alg->cra_ablkcipher; + + seq_printf(m, "type : givcipher\n"); + seq_printf(m, "blocksize : %u\n", alg->cra_blocksize); + seq_printf(m, "min keysize : %u\n", ablkcipher->min_keysize); + seq_printf(m, "max keysize : %u\n", ablkcipher->max_keysize); + seq_printf(m, "ivsize : %u\n", ablkcipher->ivsize); +} + +const struct crypto_type crypto_givcipher_type = { + .ctxsize = crypto_ablkcipher_ctxsize, + .init = crypto_init_givcipher_ops, +#ifdef CONFIG_PROC_FS + .show = crypto_givcipher_show, +#endif +}; +EXPORT_SYMBOL_GPL(crypto_givcipher_type); + int crypto_grab_skcipher(struct crypto_skcipher_spawn *spawn, const char *name, u32 type, u32 mask) { diff --git a/include/crypto/internal/skcipher.h b/include/crypto/internal/skcipher.h index 87879e64ff4c..c9402dd12d03 100644 --- a/include/crypto/internal/skcipher.h +++ b/include/crypto/internal/skcipher.h @@ -14,11 +14,14 @@ #define _CRYPTO_INTERNAL_SKCIPHER_H #include +#include struct crypto_skcipher_spawn { struct crypto_spawn base; }; +extern const struct crypto_type crypto_givcipher_type; + static inline void crypto_set_skcipher_spawn( struct crypto_skcipher_spawn *spawn, struct crypto_instance *inst) { @@ -47,5 +50,11 @@ static inline struct crypto_ablkcipher *crypto_spawn_skcipher( crypto_skcipher_mask(0))); } +static inline void *skcipher_givcrypt_reqctx( + struct skcipher_givcrypt_request *req) +{ + return ablkcipher_request_ctx(&req->creq); +} + #endif /* _CRYPTO_INTERNAL_SKCIPHER_H */ diff --git a/include/crypto/skcipher.h b/include/crypto/skcipher.h new file mode 100644 index 000000000000..c283fab5eddb --- /dev/null +++ b/include/crypto/skcipher.h @@ -0,0 +1,38 @@ +/* + * Symmetric key ciphers. + * + * Copyright (c) 2007 Herbert Xu + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ + +#ifndef _CRYPTO_SKCIPHER_H +#define _CRYPTO_SKCIPHER_H + +#include + +/** + * struct skcipher_givcrypt_request - Crypto request with IV generation + * @seq: Sequence number for IV generation + * @giv: Space for generated IV + * @creq: The crypto request itself + */ +struct skcipher_givcrypt_request { + u64 seq; + u8 *giv; + + struct ablkcipher_request creq; +}; + +static inline struct crypto_ablkcipher *skcipher_givcrypt_reqtfm( + struct skcipher_givcrypt_request *req) +{ + return crypto_ablkcipher_reqtfm(&req->creq); +} + +#endif /* _CRYPTO_SKCIPHER_H */ + diff --git a/include/linux/crypto.h b/include/linux/crypto.h index d6962b409489..3656a24ea7f0 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -34,6 +34,7 @@ #define CRYPTO_ALG_TYPE_HASH 0x00000003 #define CRYPTO_ALG_TYPE_BLKCIPHER 0x00000004 #define CRYPTO_ALG_TYPE_ABLKCIPHER 0x00000005 +#define CRYPTO_ALG_TYPE_GIVCIPHER 0x00000006 #define CRYPTO_ALG_TYPE_COMPRESS 0x00000008 #define CRYPTO_ALG_TYPE_AEAD 0x00000009 @@ -99,6 +100,7 @@ struct crypto_blkcipher; struct crypto_hash; struct crypto_tfm; struct crypto_type; +struct skcipher_givcrypt_request; typedef void (*crypto_completion_t)(struct crypto_async_request *req, int err); @@ -178,6 +180,8 @@ struct ablkcipher_alg { unsigned int keylen); int (*encrypt)(struct ablkcipher_request *req); int (*decrypt)(struct ablkcipher_request *req); + int (*givencrypt)(struct skcipher_givcrypt_request *req); + int (*givdecrypt)(struct skcipher_givcrypt_request *req); unsigned int min_keysize; unsigned int max_keysize; @@ -320,6 +324,9 @@ struct ablkcipher_tfm { unsigned int keylen); int (*encrypt)(struct ablkcipher_request *req); int (*decrypt)(struct ablkcipher_request *req); + int (*givencrypt)(struct skcipher_givcrypt_request *req); + int (*givdecrypt)(struct skcipher_givcrypt_request *req); + unsigned int ivsize; unsigned int reqsize; }; -- cgit v1.2.3-59-g8ed1b From 23508e11ab3bb405dca66bf4d77e488bf2b07b0c Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 27 Nov 2007 21:33:24 +0800 Subject: [CRYPTO] skcipher: Added geniv field This patch introduces the geniv field which indicates the default IV generator for each algorithm. It should point to a string that is not freed as long as the algorithm is registered. Signed-off-by: Herbert Xu --- crypto/ablkcipher.c | 2 ++ crypto/blkcipher.c | 2 ++ include/linux/crypto.h | 4 ++++ 3 files changed, 8 insertions(+) diff --git a/crypto/ablkcipher.c b/crypto/ablkcipher.c index e403d8137ecd..8f48b4d58fca 100644 --- a/crypto/ablkcipher.c +++ b/crypto/ablkcipher.c @@ -96,6 +96,7 @@ static void crypto_ablkcipher_show(struct seq_file *m, struct crypto_alg *alg) seq_printf(m, "min keysize : %u\n", ablkcipher->min_keysize); seq_printf(m, "max keysize : %u\n", ablkcipher->max_keysize); seq_printf(m, "ivsize : %u\n", ablkcipher->ivsize); + seq_printf(m, "geniv : %s\n", ablkcipher->geniv ?: ""); } const struct crypto_type crypto_ablkcipher_type = { @@ -142,6 +143,7 @@ static void crypto_givcipher_show(struct seq_file *m, struct crypto_alg *alg) seq_printf(m, "min keysize : %u\n", ablkcipher->min_keysize); seq_printf(m, "max keysize : %u\n", ablkcipher->max_keysize); seq_printf(m, "ivsize : %u\n", ablkcipher->ivsize); + seq_printf(m, "geniv : %s\n", ablkcipher->geniv ?: ""); } const struct crypto_type crypto_givcipher_type = { diff --git a/crypto/blkcipher.c b/crypto/blkcipher.c index 7939504dfd8b..7a3e1a308074 100644 --- a/crypto/blkcipher.c +++ b/crypto/blkcipher.c @@ -496,6 +496,8 @@ static void crypto_blkcipher_show(struct seq_file *m, struct crypto_alg *alg) seq_printf(m, "min keysize : %u\n", alg->cra_blkcipher.min_keysize); seq_printf(m, "max keysize : %u\n", alg->cra_blkcipher.max_keysize); seq_printf(m, "ivsize : %u\n", alg->cra_blkcipher.ivsize); + seq_printf(m, "geniv : %s\n", alg->cra_blkcipher.geniv ?: + ""); } const struct crypto_type crypto_blkcipher_type = { diff --git a/include/linux/crypto.h b/include/linux/crypto.h index 3656a24ea7f0..facafa1bd8ca 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -183,6 +183,8 @@ struct ablkcipher_alg { int (*givencrypt)(struct skcipher_givcrypt_request *req); int (*givdecrypt)(struct skcipher_givcrypt_request *req); + const char *geniv; + unsigned int min_keysize; unsigned int max_keysize; unsigned int ivsize; @@ -209,6 +211,8 @@ struct blkcipher_alg { struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes); + const char *geniv; + unsigned int min_keysize; unsigned int max_keysize; unsigned int ivsize; -- cgit v1.2.3-59-g8ed1b From 927eead52c958829ef62c8aa5da2751033a2cf98 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 27 Nov 2007 21:15:31 +0800 Subject: [CRYPTO] cryptd: Use geniv of the underlying algorithm If the underlying algorithm specifies a specific geniv algorithm then we should use it for the cryptd version as well. Signed-off-by: Herbert Xu --- crypto/cryptd.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/crypto/cryptd.c b/crypto/cryptd.c index 1a5c45b96852..074298f2f8e3 100644 --- a/crypto/cryptd.c +++ b/crypto/cryptd.c @@ -243,6 +243,8 @@ static struct crypto_instance *cryptd_alloc_blkcipher( inst->alg.cra_ablkcipher.min_keysize = alg->cra_blkcipher.min_keysize; inst->alg.cra_ablkcipher.max_keysize = alg->cra_blkcipher.max_keysize; + inst->alg.cra_ablkcipher.geniv = alg->cra_blkcipher.geniv; + inst->alg.cra_ctxsize = sizeof(struct cryptd_blkcipher_ctx); inst->alg.cra_init = cryptd_blkcipher_init_tfm; -- cgit v1.2.3-59-g8ed1b From ecfc43292f68566c144afca966b46b371c26d56c Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Wed, 5 Dec 2007 21:08:36 +1100 Subject: [CRYPTO] skcipher: Add skcipher_geniv_alloc/skcipher_geniv_free This patch creates the infrastructure to help the construction of givcipher templates that wrap around existing blkcipher/ablkcipher algorithms by adding an IV generator to them. Signed-off-by: Herbert Xu --- crypto/ablkcipher.c | 10 +- crypto/blkcipher.c | 185 ++++++++++++++++++++++++++++++++++++- include/crypto/internal/skcipher.h | 18 ++++ include/linux/crypto.h | 18 +++- 4 files changed, 225 insertions(+), 6 deletions(-) diff --git a/crypto/ablkcipher.c b/crypto/ablkcipher.c index 8f48b4d58fca..092d9659b861 100644 --- a/crypto/ablkcipher.c +++ b/crypto/ablkcipher.c @@ -80,6 +80,7 @@ static int crypto_init_ablkcipher_ops(struct crypto_tfm *tfm, u32 type, crt->setkey = setkey; crt->encrypt = alg->encrypt; crt->decrypt = alg->decrypt; + crt->base = __crypto_ablkcipher_cast(tfm); crt->ivsize = alg->ivsize; return 0; @@ -122,11 +123,13 @@ static int crypto_init_givcipher_ops(struct crypto_tfm *tfm, u32 type, if (alg->ivsize > PAGE_SIZE / 8) return -EINVAL; - crt->setkey = setkey; + crt->setkey = tfm->__crt_alg->cra_flags & CRYPTO_ALG_GENIV ? + alg->setkey : setkey; crt->encrypt = alg->encrypt; crt->decrypt = alg->decrypt; crt->givencrypt = alg->givencrypt; crt->givdecrypt = alg->givdecrypt ?: no_givdecrypt; + crt->base = __crypto_ablkcipher_cast(tfm); crt->ivsize = alg->ivsize; return 0; @@ -155,6 +158,11 @@ const struct crypto_type crypto_givcipher_type = { }; EXPORT_SYMBOL_GPL(crypto_givcipher_type); +const char *crypto_default_geniv(const struct crypto_alg *alg) +{ + return alg->cra_flags & CRYPTO_ALG_ASYNC ? "eseqiv" : "chainiv"; +} + int crypto_grab_skcipher(struct crypto_skcipher_spawn *spawn, const char *name, u32 type, u32 mask) { diff --git a/crypto/blkcipher.c b/crypto/blkcipher.c index 7a3e1a308074..ca6ef065cded 100644 --- a/crypto/blkcipher.c +++ b/crypto/blkcipher.c @@ -14,8 +14,8 @@ * */ +#include #include -#include #include #include #include @@ -450,6 +450,7 @@ static int crypto_init_blkcipher_ops_async(struct crypto_tfm *tfm) crt->setkey = async_setkey; crt->encrypt = async_encrypt; crt->decrypt = async_decrypt; + crt->base = __crypto_ablkcipher_cast(tfm); crt->ivsize = alg->ivsize; return 0; @@ -509,5 +510,187 @@ const struct crypto_type crypto_blkcipher_type = { }; EXPORT_SYMBOL_GPL(crypto_blkcipher_type); +static int crypto_grab_nivcipher(struct crypto_skcipher_spawn *spawn, + const char *name, u32 type, u32 mask) +{ + struct crypto_alg *alg; + int err; + + type = crypto_skcipher_type(type); + mask = crypto_skcipher_mask(mask) | CRYPTO_ALG_GENIV; + + alg = crypto_alg_mod_lookup(name, type, mask); + if (IS_ERR(alg)) + return PTR_ERR(alg); + + err = crypto_init_spawn(&spawn->base, alg, spawn->base.inst, mask); + crypto_mod_put(alg); + return err; +} + +struct crypto_instance *skcipher_geniv_alloc(struct crypto_template *tmpl, + struct rtattr **tb, u32 type, + u32 mask) +{ + struct { + int (*setkey)(struct crypto_ablkcipher *tfm, const u8 *key, + unsigned int keylen); + int (*encrypt)(struct ablkcipher_request *req); + int (*decrypt)(struct ablkcipher_request *req); + + unsigned int min_keysize; + unsigned int max_keysize; + unsigned int ivsize; + + const char *geniv; + } balg; + const char *name; + struct crypto_skcipher_spawn *spawn; + struct crypto_attr_type *algt; + struct crypto_instance *inst; + struct crypto_alg *alg; + int err; + + algt = crypto_get_attr_type(tb); + err = PTR_ERR(algt); + if (IS_ERR(algt)) + return ERR_PTR(err); + + if ((algt->type ^ (CRYPTO_ALG_TYPE_GIVCIPHER | CRYPTO_ALG_GENIV)) & + algt->mask) + return ERR_PTR(-EINVAL); + + name = crypto_attr_alg_name(tb[1]); + err = PTR_ERR(name); + if (IS_ERR(name)) + return ERR_PTR(err); + + inst = kzalloc(sizeof(*inst) + sizeof(*spawn), GFP_KERNEL); + if (!inst) + return ERR_PTR(-ENOMEM); + + spawn = crypto_instance_ctx(inst); + + /* Ignore async algorithms if necessary. */ + mask |= crypto_requires_sync(algt->type, algt->mask); + + crypto_set_skcipher_spawn(spawn, inst); + err = crypto_grab_nivcipher(spawn, name, type, mask); + if (err) + goto err_free_inst; + + alg = crypto_skcipher_spawn_alg(spawn); + + if ((alg->cra_flags & CRYPTO_ALG_TYPE_MASK) == + CRYPTO_ALG_TYPE_BLKCIPHER) { + balg.ivsize = alg->cra_blkcipher.ivsize; + balg.min_keysize = alg->cra_blkcipher.min_keysize; + balg.max_keysize = alg->cra_blkcipher.max_keysize; + + balg.setkey = async_setkey; + balg.encrypt = async_encrypt; + balg.decrypt = async_decrypt; + + balg.geniv = alg->cra_blkcipher.geniv; + } else { + balg.ivsize = alg->cra_ablkcipher.ivsize; + balg.min_keysize = alg->cra_ablkcipher.min_keysize; + balg.max_keysize = alg->cra_ablkcipher.max_keysize; + + balg.setkey = alg->cra_ablkcipher.setkey; + balg.encrypt = alg->cra_ablkcipher.encrypt; + balg.decrypt = alg->cra_ablkcipher.decrypt; + + balg.geniv = alg->cra_ablkcipher.geniv; + } + + err = -EINVAL; + if (!balg.ivsize) + goto err_drop_alg; + + /* + * This is only true if we're constructing an algorithm with its + * default IV generator. For the default generator we elide the + * template name and double-check the IV generator. + */ + if (algt->mask & CRYPTO_ALG_GENIV) { + if (!balg.geniv) + balg.geniv = crypto_default_geniv(alg); + err = -EAGAIN; + if (strcmp(tmpl->name, balg.geniv)) + goto err_drop_alg; + + memcpy(inst->alg.cra_name, alg->cra_name, CRYPTO_MAX_ALG_NAME); + memcpy(inst->alg.cra_driver_name, alg->cra_driver_name, + CRYPTO_MAX_ALG_NAME); + } else { + err = -ENAMETOOLONG; + if (snprintf(inst->alg.cra_name, CRYPTO_MAX_ALG_NAME, + "%s(%s)", tmpl->name, alg->cra_name) >= + CRYPTO_MAX_ALG_NAME) + goto err_drop_alg; + if (snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME, + "%s(%s)", tmpl->name, alg->cra_driver_name) >= + CRYPTO_MAX_ALG_NAME) + goto err_drop_alg; + } + + inst->alg.cra_flags = CRYPTO_ALG_TYPE_GIVCIPHER | CRYPTO_ALG_GENIV; + inst->alg.cra_flags |= alg->cra_flags & CRYPTO_ALG_ASYNC; + inst->alg.cra_priority = alg->cra_priority; + inst->alg.cra_blocksize = alg->cra_blocksize; + inst->alg.cra_alignmask = alg->cra_alignmask; + inst->alg.cra_type = &crypto_givcipher_type; + + inst->alg.cra_ablkcipher.ivsize = balg.ivsize; + inst->alg.cra_ablkcipher.min_keysize = balg.min_keysize; + inst->alg.cra_ablkcipher.max_keysize = balg.max_keysize; + inst->alg.cra_ablkcipher.geniv = balg.geniv; + + inst->alg.cra_ablkcipher.setkey = balg.setkey; + inst->alg.cra_ablkcipher.encrypt = balg.encrypt; + inst->alg.cra_ablkcipher.decrypt = balg.decrypt; + +out: + return inst; + +err_drop_alg: + crypto_drop_skcipher(spawn); +err_free_inst: + kfree(inst); + inst = ERR_PTR(err); + goto out; +} +EXPORT_SYMBOL_GPL(skcipher_geniv_alloc); + +void skcipher_geniv_free(struct crypto_instance *inst) +{ + crypto_drop_skcipher(crypto_instance_ctx(inst)); + kfree(inst); +} +EXPORT_SYMBOL_GPL(skcipher_geniv_free); + +int skcipher_geniv_init(struct crypto_tfm *tfm) +{ + struct crypto_instance *inst = (void *)tfm->__crt_alg; + struct crypto_ablkcipher *cipher; + + cipher = crypto_spawn_skcipher(crypto_instance_ctx(inst)); + if (IS_ERR(cipher)) + return PTR_ERR(cipher); + + tfm->crt_ablkcipher.base = cipher; + tfm->crt_ablkcipher.reqsize += crypto_ablkcipher_reqsize(cipher); + + return 0; +} +EXPORT_SYMBOL_GPL(skcipher_geniv_init); + +void skcipher_geniv_exit(struct crypto_tfm *tfm) +{ + crypto_free_ablkcipher(tfm->crt_ablkcipher.base); +} +EXPORT_SYMBOL_GPL(skcipher_geniv_exit); + MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Generic block chaining cipher type"); diff --git a/include/crypto/internal/skcipher.h b/include/crypto/internal/skcipher.h index c9402dd12d03..07e7c82324ad 100644 --- a/include/crypto/internal/skcipher.h +++ b/include/crypto/internal/skcipher.h @@ -15,6 +15,9 @@ #include #include +#include + +struct rtattr; struct crypto_skcipher_spawn { struct crypto_spawn base; @@ -50,6 +53,21 @@ static inline struct crypto_ablkcipher *crypto_spawn_skcipher( crypto_skcipher_mask(0))); } +const char *crypto_default_geniv(const struct crypto_alg *alg); + +struct crypto_instance *skcipher_geniv_alloc(struct crypto_template *tmpl, + struct rtattr **tb, u32 type, + u32 mask); +void skcipher_geniv_free(struct crypto_instance *inst); +int skcipher_geniv_init(struct crypto_tfm *tfm); +void skcipher_geniv_exit(struct crypto_tfm *tfm); + +static inline struct crypto_ablkcipher *skcipher_geniv_cipher( + struct crypto_ablkcipher *geniv) +{ + return crypto_ablkcipher_crt(geniv)->base; +} + static inline void *skcipher_givcrypt_reqctx( struct skcipher_givcrypt_request *req) { diff --git a/include/linux/crypto.h b/include/linux/crypto.h index facafa1bd8ca..fa7afa9b9f4f 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -52,6 +52,12 @@ */ #define CRYPTO_ALG_NEED_FALLBACK 0x00000100 +/* + * This bit is set for symmetric key ciphers that have already been wrapped + * with a generic IV generator to prevent them from being wrapped again. + */ +#define CRYPTO_ALG_GENIV 0x00000200 + /* * Transform masks and values (for crt_flags). */ @@ -331,6 +337,8 @@ struct ablkcipher_tfm { int (*givencrypt)(struct skcipher_givcrypt_request *req); int (*givdecrypt)(struct skcipher_givcrypt_request *req); + struct crypto_ablkcipher *base; + unsigned int ivsize; unsigned int reqsize; }; @@ -541,14 +549,14 @@ static inline struct crypto_ablkcipher *__crypto_ablkcipher_cast( static inline u32 crypto_skcipher_type(u32 type) { - type &= ~CRYPTO_ALG_TYPE_MASK; + type &= ~(CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_GENIV); type |= CRYPTO_ALG_TYPE_BLKCIPHER; return type; } static inline u32 crypto_skcipher_mask(u32 mask) { - mask &= ~CRYPTO_ALG_TYPE_MASK; + mask &= ~(CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_GENIV); mask |= CRYPTO_ALG_TYPE_BLKCIPHER_MASK; return mask; } @@ -623,7 +631,9 @@ static inline void crypto_ablkcipher_clear_flags(struct crypto_ablkcipher *tfm, static inline int crypto_ablkcipher_setkey(struct crypto_ablkcipher *tfm, const u8 *key, unsigned int keylen) { - return crypto_ablkcipher_crt(tfm)->setkey(tfm, key, keylen); + struct ablkcipher_tfm *crt = crypto_ablkcipher_crt(tfm); + + return crt->setkey(crt->base, key, keylen); } static inline struct crypto_ablkcipher *crypto_ablkcipher_reqtfm( @@ -655,7 +665,7 @@ static inline unsigned int crypto_ablkcipher_reqsize( static inline void ablkcipher_request_set_tfm( struct ablkcipher_request *req, struct crypto_ablkcipher *tfm) { - req->base.tfm = crypto_ablkcipher_tfm(tfm); + req->base.tfm = crypto_ablkcipher_tfm(crypto_ablkcipher_crt(tfm)->base); } static inline struct ablkcipher_request *ablkcipher_request_cast( -- cgit v1.2.3-59-g8ed1b From 7f47073911f0e4384d38a0827d28305a177c8816 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 27 Nov 2007 23:17:23 +0800 Subject: [CRYPTO] chainiv: Add chain IV generator The chain IV generator is the one we've been using in the IPsec stack. It simply starts out with a random IV, then uses the last block of each encrypted packet's cipher text as the IV for the next packet. It can only be used by synchronous ciphers since we have to make sure that we don't start the encryption of the next packet until the last one has completed. It does have the advantage of using very little CPU time since it doesn't have to generate anything at all. Signed-off-by: Herbert Xu --- crypto/Makefile | 1 + crypto/chainiv.c | 139 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 140 insertions(+) create mode 100644 crypto/chainiv.c diff --git a/crypto/Makefile b/crypto/Makefile index 2a1883fabf42..4b2e0c387cc2 100644 --- a/crypto/Makefile +++ b/crypto/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_CRYPTO_AEAD) += aead.o crypto_blkcipher-objs := ablkcipher.o crypto_blkcipher-objs += blkcipher.o obj-$(CONFIG_CRYPTO_BLKCIPHER) += crypto_blkcipher.o +obj-$(CONFIG_CRYPTO_BLKCIPHER) += chainiv.o crypto_hash-objs := hash.o obj-$(CONFIG_CRYPTO_HASH) += crypto_hash.o diff --git a/crypto/chainiv.c b/crypto/chainiv.c new file mode 100644 index 000000000000..38868d160b47 --- /dev/null +++ b/crypto/chainiv.c @@ -0,0 +1,139 @@ +/* + * chainiv: Chain IV Generator + * + * Generate IVs simply be using the last block of the previous encryption. + * This is mainly useful for CBC with a synchronous algorithm. + * + * Copyright (c) 2007 Herbert Xu + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +struct chainiv_ctx { + spinlock_t lock; + char iv[]; +}; + +static int chainiv_givencrypt(struct skcipher_givcrypt_request *req) +{ + struct crypto_ablkcipher *geniv = skcipher_givcrypt_reqtfm(req); + struct chainiv_ctx *ctx = crypto_ablkcipher_ctx(geniv); + struct ablkcipher_request *subreq = skcipher_givcrypt_reqctx(req); + unsigned int ivsize; + int err; + + ablkcipher_request_set_tfm(subreq, skcipher_geniv_cipher(geniv)); + ablkcipher_request_set_callback(subreq, req->creq.base.flags & + ~CRYPTO_TFM_REQ_MAY_SLEEP, + req->creq.base.complete, + req->creq.base.data); + ablkcipher_request_set_crypt(subreq, req->creq.src, req->creq.dst, + req->creq.nbytes, req->creq.info); + + spin_lock_bh(&ctx->lock); + + ivsize = crypto_ablkcipher_ivsize(geniv); + + memcpy(req->giv, ctx->iv, ivsize); + memcpy(subreq->info, ctx->iv, ivsize); + + err = crypto_ablkcipher_encrypt(subreq); + if (err) + goto unlock; + + memcpy(ctx->iv, subreq->info, ivsize); + +unlock: + spin_unlock_bh(&ctx->lock); + + return err; +} + +static int chainiv_givencrypt_first(struct skcipher_givcrypt_request *req) +{ + struct crypto_ablkcipher *geniv = skcipher_givcrypt_reqtfm(req); + struct chainiv_ctx *ctx = crypto_ablkcipher_ctx(geniv); + + spin_lock_bh(&ctx->lock); + if (crypto_ablkcipher_crt(geniv)->givencrypt != + chainiv_givencrypt_first) + goto unlock; + + crypto_ablkcipher_crt(geniv)->givencrypt = chainiv_givencrypt; + get_random_bytes(ctx->iv, crypto_ablkcipher_ivsize(geniv)); + +unlock: + spin_unlock_bh(&ctx->lock); + + return chainiv_givencrypt(req); +} + +static int chainiv_init(struct crypto_tfm *tfm) +{ + struct crypto_ablkcipher *geniv = __crypto_ablkcipher_cast(tfm); + struct chainiv_ctx *ctx = crypto_ablkcipher_ctx(geniv); + + spin_lock_init(&ctx->lock); + + tfm->crt_ablkcipher.reqsize = sizeof(struct ablkcipher_request); + + return skcipher_geniv_init(tfm); +} + +static struct crypto_template chainiv_tmpl; + +static struct crypto_instance *chainiv_alloc(struct rtattr **tb) +{ + struct crypto_instance *inst; + + inst = skcipher_geniv_alloc(&chainiv_tmpl, tb, 0, + CRYPTO_ALG_ASYNC); + if (IS_ERR(inst)) + goto out; + + inst->alg.cra_ablkcipher.givencrypt = chainiv_givencrypt_first; + + inst->alg.cra_init = chainiv_init; + inst->alg.cra_exit = skcipher_geniv_exit; + + inst->alg.cra_ctxsize = sizeof(struct chainiv_ctx) + + inst->alg.cra_ablkcipher.ivsize; + +out: + return inst; +} + +static struct crypto_template chainiv_tmpl = { + .name = "chainiv", + .alloc = chainiv_alloc, + .free = skcipher_geniv_free, + .module = THIS_MODULE, +}; + +static int __init chainiv_module_init(void) +{ + return crypto_register_template(&chainiv_tmpl); +} + +static void __exit chainiv_module_exit(void) +{ + crypto_unregister_template(&chainiv_tmpl); +} + +module_init(chainiv_module_init); +module_exit(chainiv_module_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Chain IV Generator"); -- cgit v1.2.3-59-g8ed1b From 15c67286685cddce207b646306e8819ec8268ede Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 30 Nov 2007 20:17:28 +1100 Subject: [CRYPTO] skcipher: Added skcipher_givcrypt_complete This patch adds the helper skcipher_givcrypt_complete which should be called when an ablkcipher algorithm has completed a givcrypt request. Signed-off-by: Herbert Xu --- include/crypto/internal/skcipher.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/include/crypto/internal/skcipher.h b/include/crypto/internal/skcipher.h index 07e7c82324ad..80c5bfb14a60 100644 --- a/include/crypto/internal/skcipher.h +++ b/include/crypto/internal/skcipher.h @@ -74,5 +74,17 @@ static inline void *skcipher_givcrypt_reqctx( return ablkcipher_request_ctx(&req->creq); } +static inline void ablkcipher_request_complete(struct ablkcipher_request *req, + int err) +{ + req->base.complete(&req->base, err); +} + +static inline void skcipher_givcrypt_complete( + struct skcipher_givcrypt_request *req, int err) +{ + ablkcipher_request_complete(&req->creq, err); +} + #endif /* _CRYPTO_INTERNAL_SKCIPHER_H */ -- cgit v1.2.3-59-g8ed1b From 806d183aa6cc565d0f6bd2fb7fc6bfb175cc4813 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Wed, 5 Dec 2007 12:10:53 +1100 Subject: [CRYPTO] eseqiv: Add Encrypted Sequence Number IV Generator This generator generates an IV based on a sequence number by xoring it with a salt and then encrypting it with the same key as used to encrypt the plain text. This algorithm requires that the block size be equal to the IV size. It is mainly useful for CBC. It has one noteworthy property that for IPsec the IV happens to lie just before the plain text so the IV generation simply increases the number of encrypted blocks by one. Therefore the cost of this generator is entirely dependent on the speed of the underlying cipher. Signed-off-by: Herbert Xu --- crypto/Makefile | 1 + crypto/eseqiv.c | 264 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 265 insertions(+) create mode 100644 crypto/eseqiv.c diff --git a/crypto/Makefile b/crypto/Makefile index 4b2e0c387cc2..968b796d9e6c 100644 --- a/crypto/Makefile +++ b/crypto/Makefile @@ -14,6 +14,7 @@ crypto_blkcipher-objs := ablkcipher.o crypto_blkcipher-objs += blkcipher.o obj-$(CONFIG_CRYPTO_BLKCIPHER) += crypto_blkcipher.o obj-$(CONFIG_CRYPTO_BLKCIPHER) += chainiv.o +obj-$(CONFIG_CRYPTO_BLKCIPHER) += eseqiv.o crypto_hash-objs := hash.o obj-$(CONFIG_CRYPTO_HASH) += crypto_hash.o diff --git a/crypto/eseqiv.c b/crypto/eseqiv.c new file mode 100644 index 000000000000..eb90d27ae118 --- /dev/null +++ b/crypto/eseqiv.c @@ -0,0 +1,264 @@ +/* + * eseqiv: Encrypted Sequence Number IV Generator + * + * This generator generates an IV based on a sequence number by xoring it + * with a salt and then encrypting it with the same key as used to encrypt + * the plain text. This algorithm requires that the block size be equal + * to the IV size. It is mainly useful for CBC. + * + * Copyright (c) 2007 Herbert Xu + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct eseqiv_request_ctx { + struct scatterlist src[2]; + struct scatterlist dst[2]; + char tail[]; +}; + +struct eseqiv_ctx { + spinlock_t lock; + unsigned int reqoff; + char salt[]; +}; + +static void eseqiv_complete2(struct skcipher_givcrypt_request *req) +{ + struct crypto_ablkcipher *geniv = skcipher_givcrypt_reqtfm(req); + struct eseqiv_request_ctx *reqctx = skcipher_givcrypt_reqctx(req); + + memcpy(req->giv, PTR_ALIGN((u8 *)reqctx->tail, + crypto_ablkcipher_alignmask(geniv) + 1), + crypto_ablkcipher_ivsize(geniv)); +} + +static void eseqiv_complete(struct crypto_async_request *base, int err) +{ + struct skcipher_givcrypt_request *req = base->data; + + if (err) + goto out; + + eseqiv_complete2(req); + +out: + skcipher_givcrypt_complete(req, err); +} + +static void eseqiv_chain(struct scatterlist *head, struct scatterlist *sg, + int chain) +{ + if (chain) { + head->length += sg->length; + sg = scatterwalk_sg_next(sg); + } + + if (sg) + scatterwalk_sg_chain(head, 2, sg); + else + sg_mark_end(head); +} + +static int eseqiv_givencrypt(struct skcipher_givcrypt_request *req) +{ + struct crypto_ablkcipher *geniv = skcipher_givcrypt_reqtfm(req); + struct eseqiv_ctx *ctx = crypto_ablkcipher_ctx(geniv); + struct eseqiv_request_ctx *reqctx = skcipher_givcrypt_reqctx(req); + struct ablkcipher_request *subreq; + crypto_completion_t complete; + void *data; + struct scatterlist *osrc, *odst; + struct scatterlist *dst; + struct page *srcp; + struct page *dstp; + u8 *giv; + u8 *vsrc; + u8 *vdst; + __be64 seq; + unsigned int ivsize; + unsigned int len; + int err; + + subreq = (void *)(reqctx->tail + ctx->reqoff); + ablkcipher_request_set_tfm(subreq, skcipher_geniv_cipher(geniv)); + + giv = req->giv; + complete = req->creq.base.complete; + data = req->creq.base.data; + + osrc = req->creq.src; + odst = req->creq.dst; + srcp = sg_page(osrc); + dstp = sg_page(odst); + vsrc = PageHighMem(srcp) ? NULL : page_address(srcp) + osrc->offset; + vdst = PageHighMem(dstp) ? NULL : page_address(dstp) + odst->offset; + + ivsize = crypto_ablkcipher_ivsize(geniv); + + if (vsrc != giv + ivsize && vdst != giv + ivsize) { + giv = PTR_ALIGN((u8 *)reqctx->tail, + crypto_ablkcipher_alignmask(geniv) + 1); + complete = eseqiv_complete; + data = req; + } + + ablkcipher_request_set_callback(subreq, req->creq.base.flags, complete, + data); + + sg_init_table(reqctx->src, 2); + sg_set_buf(reqctx->src, giv, ivsize); + eseqiv_chain(reqctx->src, osrc, vsrc == giv + ivsize); + + dst = reqctx->src; + if (osrc != odst) { + sg_init_table(reqctx->dst, 2); + sg_set_buf(reqctx->dst, giv, ivsize); + eseqiv_chain(reqctx->dst, odst, vdst == giv + ivsize); + + dst = reqctx->dst; + } + + ablkcipher_request_set_crypt(subreq, reqctx->src, dst, + req->creq.nbytes, req->creq.info); + + memcpy(req->creq.info, ctx->salt, ivsize); + + len = ivsize; + if (ivsize > sizeof(u64)) { + memset(req->giv, 0, ivsize - sizeof(u64)); + len = sizeof(u64); + } + seq = cpu_to_be64(req->seq); + memcpy(req->giv + ivsize - len, &seq, len); + + err = crypto_ablkcipher_encrypt(subreq); + if (err) + goto out; + + eseqiv_complete2(req); + +out: + return err; +} + +static int eseqiv_givencrypt_first(struct skcipher_givcrypt_request *req) +{ + struct crypto_ablkcipher *geniv = skcipher_givcrypt_reqtfm(req); + struct eseqiv_ctx *ctx = crypto_ablkcipher_ctx(geniv); + + spin_lock_bh(&ctx->lock); + if (crypto_ablkcipher_crt(geniv)->givencrypt != eseqiv_givencrypt_first) + goto unlock; + + crypto_ablkcipher_crt(geniv)->givencrypt = eseqiv_givencrypt; + get_random_bytes(ctx->salt, crypto_ablkcipher_ivsize(geniv)); + +unlock: + spin_unlock_bh(&ctx->lock); + + return eseqiv_givencrypt(req); +} + +static int eseqiv_init(struct crypto_tfm *tfm) +{ + struct crypto_ablkcipher *geniv = __crypto_ablkcipher_cast(tfm); + struct eseqiv_ctx *ctx = crypto_ablkcipher_ctx(geniv); + unsigned long alignmask; + unsigned int reqsize; + + spin_lock_init(&ctx->lock); + + alignmask = crypto_tfm_ctx_alignment() - 1; + reqsize = sizeof(struct eseqiv_request_ctx); + + if (alignmask & reqsize) { + alignmask &= reqsize; + alignmask--; + } + + alignmask = ~alignmask; + alignmask &= crypto_ablkcipher_alignmask(geniv); + + reqsize += alignmask; + reqsize += crypto_ablkcipher_ivsize(geniv); + reqsize = ALIGN(reqsize, crypto_tfm_ctx_alignment()); + + ctx->reqoff = reqsize - sizeof(struct eseqiv_request_ctx); + + tfm->crt_ablkcipher.reqsize = reqsize + + sizeof(struct ablkcipher_request); + + return skcipher_geniv_init(tfm); +} + +static struct crypto_template eseqiv_tmpl; + +static struct crypto_instance *eseqiv_alloc(struct rtattr **tb) +{ + struct crypto_instance *inst; + int err; + + inst = skcipher_geniv_alloc(&eseqiv_tmpl, tb, 0, 0); + if (IS_ERR(inst)) + goto out; + + err = -EINVAL; + if (inst->alg.cra_ablkcipher.ivsize != inst->alg.cra_blocksize) + goto free_inst; + + inst->alg.cra_ablkcipher.givencrypt = eseqiv_givencrypt_first; + + inst->alg.cra_init = eseqiv_init; + inst->alg.cra_exit = skcipher_geniv_exit; + + inst->alg.cra_ctxsize = sizeof(struct eseqiv_ctx); + inst->alg.cra_ctxsize += inst->alg.cra_ablkcipher.ivsize; + +out: + return inst; + +free_inst: + skcipher_geniv_free(inst); + inst = ERR_PTR(err); + goto out; +} + +static struct crypto_template eseqiv_tmpl = { + .name = "eseqiv", + .alloc = eseqiv_alloc, + .free = skcipher_geniv_free, + .module = THIS_MODULE, +}; + +static int __init eseqiv_module_init(void) +{ + return crypto_register_template(&eseqiv_tmpl); +} + +static void __exit eseqiv_module_exit(void) +{ + crypto_unregister_template(&eseqiv_tmpl); +} + +module_init(eseqiv_module_init); +module_exit(eseqiv_module_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Encrypted Sequence Number IV Generator"); -- cgit v1.2.3-59-g8ed1b From b9c55aa475599183d0eab6833ea23e70c52dd24b Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 4 Dec 2007 12:46:48 +1100 Subject: [CRYPTO] skcipher: Create default givcipher instances This patch makes crypto_alloc_ablkcipher/crypto_grab_skcipher always return algorithms that are capable of generating their own IVs through givencrypt and givdecrypt. Each algorithm may specify its default IV generator through the geniv field. For algorithms that do not set the geniv field, the blkcipher layer will pick a default. Currently it's chainiv for synchronous algorithms and eseqiv for asynchronous algorithms. Note that if these wrappers do not work on an algorithm then that algorithm must specify its own geniv or it can't be used at all. Signed-off-by: Herbert Xu --- crypto/ablkcipher.c | 158 ++++++++++++++++++++++++++++++++++++- crypto/api.c | 19 +++-- crypto/blkcipher.c | 4 + crypto/internal.h | 2 + include/crypto/internal/skcipher.h | 2 + include/linux/crypto.h | 9 +-- 6 files changed, 181 insertions(+), 13 deletions(-) diff --git a/crypto/ablkcipher.c b/crypto/ablkcipher.c index 092d9659b861..d1df528c8fa3 100644 --- a/crypto/ablkcipher.c +++ b/crypto/ablkcipher.c @@ -18,6 +18,8 @@ #include #include #include +#include +#include #include #include @@ -68,6 +70,16 @@ static unsigned int crypto_ablkcipher_ctxsize(struct crypto_alg *alg, u32 type, return alg->cra_ctxsize; } +int skcipher_null_givencrypt(struct skcipher_givcrypt_request *req) +{ + return crypto_ablkcipher_encrypt(&req->creq); +} + +int skcipher_null_givdecrypt(struct skcipher_givcrypt_request *req) +{ + return crypto_ablkcipher_decrypt(&req->creq); +} + static int crypto_init_ablkcipher_ops(struct crypto_tfm *tfm, u32 type, u32 mask) { @@ -80,6 +92,10 @@ static int crypto_init_ablkcipher_ops(struct crypto_tfm *tfm, u32 type, crt->setkey = setkey; crt->encrypt = alg->encrypt; crt->decrypt = alg->decrypt; + if (!alg->ivsize) { + crt->givencrypt = skcipher_null_givencrypt; + crt->givdecrypt = skcipher_null_givdecrypt; + } crt->base = __crypto_ablkcipher_cast(tfm); crt->ivsize = alg->ivsize; @@ -163,6 +179,108 @@ const char *crypto_default_geniv(const struct crypto_alg *alg) return alg->cra_flags & CRYPTO_ALG_ASYNC ? "eseqiv" : "chainiv"; } +static int crypto_givcipher_default(struct crypto_alg *alg, u32 type, u32 mask) +{ + struct rtattr *tb[3]; + struct { + struct rtattr attr; + struct crypto_attr_type data; + } ptype; + struct { + struct rtattr attr; + struct crypto_attr_alg data; + } palg; + struct crypto_template *tmpl; + struct crypto_instance *inst; + struct crypto_alg *larval; + const char *geniv; + int err; + + larval = crypto_larval_lookup(alg->cra_driver_name, + CRYPTO_ALG_TYPE_GIVCIPHER, + CRYPTO_ALG_TYPE_MASK); + err = PTR_ERR(larval); + if (IS_ERR(larval)) + goto out; + + err = -EAGAIN; + if (!crypto_is_larval(larval)) + goto drop_larval; + + ptype.attr.rta_len = sizeof(ptype); + ptype.attr.rta_type = CRYPTOA_TYPE; + ptype.data.type = type | CRYPTO_ALG_GENIV; + /* GENIV tells the template that we're making a default geniv. */ + ptype.data.mask = mask | CRYPTO_ALG_GENIV; + tb[0] = &ptype.attr; + + palg.attr.rta_len = sizeof(palg); + palg.attr.rta_type = CRYPTOA_ALG; + /* Must use the exact name to locate ourselves. */ + memcpy(palg.data.name, alg->cra_driver_name, CRYPTO_MAX_ALG_NAME); + tb[1] = &palg.attr; + + tb[2] = NULL; + + if ((alg->cra_flags & CRYPTO_ALG_TYPE_MASK) == + CRYPTO_ALG_TYPE_BLKCIPHER) + geniv = alg->cra_blkcipher.geniv; + else + geniv = alg->cra_ablkcipher.geniv; + + if (!geniv) + geniv = crypto_default_geniv(alg); + + tmpl = crypto_lookup_template(geniv); + err = -ENOENT; + if (!tmpl) + goto kill_larval; + + inst = tmpl->alloc(tb); + err = PTR_ERR(inst); + if (IS_ERR(inst)) + goto put_tmpl; + + if ((err = crypto_register_instance(tmpl, inst))) { + tmpl->free(inst); + goto put_tmpl; + } + + /* Redo the lookup to use the instance we just registered. */ + err = -EAGAIN; + +put_tmpl: + crypto_tmpl_put(tmpl); +kill_larval: + crypto_larval_kill(larval); +drop_larval: + crypto_mod_put(larval); +out: + crypto_mod_put(alg); + return err; +} + +static struct crypto_alg *crypto_lookup_skcipher(const char *name, u32 type, + u32 mask) +{ + struct crypto_alg *alg; + + alg = crypto_alg_mod_lookup(name, type, mask); + if (IS_ERR(alg)) + return alg; + + if ((alg->cra_flags & CRYPTO_ALG_TYPE_MASK) == + CRYPTO_ALG_TYPE_GIVCIPHER) + return alg; + + if (!((alg->cra_flags & CRYPTO_ALG_TYPE_MASK) == + CRYPTO_ALG_TYPE_BLKCIPHER ? alg->cra_blkcipher.ivsize : + alg->cra_ablkcipher.ivsize)) + return alg; + + return ERR_PTR(crypto_givcipher_default(alg, type, mask)); +} + int crypto_grab_skcipher(struct crypto_skcipher_spawn *spawn, const char *name, u32 type, u32 mask) { @@ -172,7 +290,7 @@ int crypto_grab_skcipher(struct crypto_skcipher_spawn *spawn, const char *name, type = crypto_skcipher_type(type); mask = crypto_skcipher_mask(mask); - alg = crypto_alg_mod_lookup(name, type, mask); + alg = crypto_lookup_skcipher(name, type, mask); if (IS_ERR(alg)) return PTR_ERR(alg); @@ -182,5 +300,43 @@ int crypto_grab_skcipher(struct crypto_skcipher_spawn *spawn, const char *name, } EXPORT_SYMBOL_GPL(crypto_grab_skcipher); +struct crypto_ablkcipher *crypto_alloc_ablkcipher(const char *alg_name, + u32 type, u32 mask) +{ + struct crypto_tfm *tfm; + int err; + + type = crypto_skcipher_type(type); + mask = crypto_skcipher_mask(mask); + + for (;;) { + struct crypto_alg *alg; + + alg = crypto_lookup_skcipher(alg_name, type, mask); + if (IS_ERR(alg)) { + err = PTR_ERR(alg); + goto err; + } + + tfm = __crypto_alloc_tfm(alg, type, mask); + if (!IS_ERR(tfm)) + return __crypto_ablkcipher_cast(tfm); + + crypto_mod_put(alg); + err = PTR_ERR(tfm); + +err: + if (err != -EAGAIN) + break; + if (signal_pending(current)) { + err = -EINTR; + break; + } + } + + return ERR_PTR(err); +} +EXPORT_SYMBOL_GPL(crypto_alloc_ablkcipher); + MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Asynchronous block chaining cipher type"); diff --git a/crypto/api.c b/crypto/api.c index 1f5c72477356..a2496d1bc6d4 100644 --- a/crypto/api.c +++ b/crypto/api.c @@ -137,7 +137,7 @@ static struct crypto_alg *crypto_larval_alloc(const char *name, u32 type, return alg; } -static void crypto_larval_kill(struct crypto_alg *alg) +void crypto_larval_kill(struct crypto_alg *alg) { struct crypto_larval *larval = (void *)alg; @@ -147,6 +147,7 @@ static void crypto_larval_kill(struct crypto_alg *alg) complete_all(&larval->completion); crypto_alg_put(alg); } +EXPORT_SYMBOL_GPL(crypto_larval_kill); static struct crypto_alg *crypto_larval_wait(struct crypto_alg *alg) { @@ -176,11 +177,9 @@ static struct crypto_alg *crypto_alg_lookup(const char *name, u32 type, return alg; } -struct crypto_alg *crypto_alg_mod_lookup(const char *name, u32 type, u32 mask) +struct crypto_alg *crypto_larval_lookup(const char *name, u32 type, u32 mask) { struct crypto_alg *alg; - struct crypto_alg *larval; - int ok; if (!name) return ERR_PTR(-ENOENT); @@ -193,7 +192,17 @@ struct crypto_alg *crypto_alg_mod_lookup(const char *name, u32 type, u32 mask) if (alg) return crypto_is_larval(alg) ? crypto_larval_wait(alg) : alg; - larval = crypto_larval_alloc(name, type, mask); + return crypto_larval_alloc(name, type, mask); +} +EXPORT_SYMBOL_GPL(crypto_larval_lookup); + +struct crypto_alg *crypto_alg_mod_lookup(const char *name, u32 type, u32 mask) +{ + struct crypto_alg *alg; + struct crypto_alg *larval; + int ok; + + larval = crypto_larval_lookup(name, type, mask); if (IS_ERR(larval) || !crypto_is_larval(larval)) return larval; diff --git a/crypto/blkcipher.c b/crypto/blkcipher.c index ca6ef065cded..4a7e65c4df4d 100644 --- a/crypto/blkcipher.c +++ b/crypto/blkcipher.c @@ -450,6 +450,10 @@ static int crypto_init_blkcipher_ops_async(struct crypto_tfm *tfm) crt->setkey = async_setkey; crt->encrypt = async_encrypt; crt->decrypt = async_decrypt; + if (!alg->ivsize) { + crt->givencrypt = skcipher_null_givencrypt; + crt->givdecrypt = skcipher_null_givdecrypt; + } crt->base = __crypto_ablkcipher_cast(tfm); crt->ivsize = alg->ivsize; diff --git a/crypto/internal.h b/crypto/internal.h index cb13952f82bf..32f4c2145603 100644 --- a/crypto/internal.h +++ b/crypto/internal.h @@ -93,6 +93,8 @@ void crypto_exit_digest_ops(struct crypto_tfm *tfm); void crypto_exit_cipher_ops(struct crypto_tfm *tfm); void crypto_exit_compress_ops(struct crypto_tfm *tfm); +void crypto_larval_kill(struct crypto_alg *alg); +struct crypto_alg *crypto_larval_lookup(const char *name, u32 type, u32 mask); void crypto_larval_error(const char *name, u32 type, u32 mask); void crypto_shoot_alg(struct crypto_alg *alg); diff --git a/include/crypto/internal/skcipher.h b/include/crypto/internal/skcipher.h index 80c5bfb14a60..2071999d4b5e 100644 --- a/include/crypto/internal/skcipher.h +++ b/include/crypto/internal/skcipher.h @@ -53,6 +53,8 @@ static inline struct crypto_ablkcipher *crypto_spawn_skcipher( crypto_skcipher_mask(0))); } +int skcipher_null_givencrypt(struct skcipher_givcrypt_request *req); +int skcipher_null_givdecrypt(struct skcipher_givcrypt_request *req); const char *crypto_default_geniv(const struct crypto_alg *alg); struct crypto_instance *skcipher_geniv_alloc(struct crypto_template *tmpl, diff --git a/include/linux/crypto.h b/include/linux/crypto.h index fa7afa9b9f4f..835dcaf3fe4e 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -561,13 +561,8 @@ static inline u32 crypto_skcipher_mask(u32 mask) return mask; } -static inline struct crypto_ablkcipher *crypto_alloc_ablkcipher( - const char *alg_name, u32 type, u32 mask) -{ - return __crypto_ablkcipher_cast( - crypto_alloc_base(alg_name, crypto_skcipher_type(type), - crypto_skcipher_mask(mask))); -} +struct crypto_ablkcipher *crypto_alloc_ablkcipher(const char *alg_name, + u32 type, u32 mask); static inline struct crypto_tfm *crypto_ablkcipher_tfm( struct crypto_ablkcipher *tfm) -- cgit v1.2.3-59-g8ed1b From 9ffde35a8edd3486cd7c80af931c15cec99a1a0d Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 17 Dec 2007 20:12:49 +0800 Subject: [CRYPTO] authenc: Use crypto_grab_skcipher This patch converts the authenc algorithm over to crypto_grab_skcipher which is a prerequisite for IV generation. This patch also changes authenc to set its ASYNC status depending on the ASYNC status of the underlying skcipher. Signed-off-by: Herbert Xu --- crypto/authenc.c | 65 +++++++++++++++++++++++++++++++++----------------------- 1 file changed, 38 insertions(+), 27 deletions(-) diff --git a/crypto/authenc.c b/crypto/authenc.c index 394e73308e31..2d609b72f5be 100644 --- a/crypto/authenc.c +++ b/crypto/authenc.c @@ -10,7 +10,7 @@ * */ -#include +#include #include #include #include @@ -23,7 +23,7 @@ struct authenc_instance_ctx { struct crypto_spawn auth; - struct crypto_spawn enc; + struct crypto_skcipher_spawn enc; }; struct crypto_authenc_ctx { @@ -237,7 +237,7 @@ static int crypto_authenc_init_tfm(struct crypto_tfm *tfm) if (IS_ERR(auth)) return PTR_ERR(auth); - enc = crypto_spawn_ablkcipher(&ictx->enc); + enc = crypto_spawn_skcipher(&ictx->enc); err = PTR_ERR(enc); if (IS_ERR(enc)) goto err_free_hash; @@ -270,42 +270,36 @@ static void crypto_authenc_exit_tfm(struct crypto_tfm *tfm) static struct crypto_instance *crypto_authenc_alloc(struct rtattr **tb) { + struct crypto_attr_type *algt; struct crypto_instance *inst; struct crypto_alg *auth; struct crypto_alg *enc; struct authenc_instance_ctx *ctx; + const char *enc_name; int err; - err = crypto_check_attr_type(tb, CRYPTO_ALG_TYPE_AEAD); - if (err) + algt = crypto_get_attr_type(tb); + err = PTR_ERR(algt); + if (IS_ERR(algt)) return ERR_PTR(err); + if ((algt->type ^ CRYPTO_ALG_TYPE_AEAD) & algt->mask) + return ERR_PTR(-EINVAL); + auth = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_HASH, CRYPTO_ALG_TYPE_HASH_MASK); if (IS_ERR(auth)) return ERR_PTR(PTR_ERR(auth)); - enc = crypto_attr_alg(tb[2], CRYPTO_ALG_TYPE_BLKCIPHER, - CRYPTO_ALG_TYPE_BLKCIPHER_MASK); - inst = ERR_PTR(PTR_ERR(enc)); - if (IS_ERR(enc)) + enc_name = crypto_attr_alg_name(tb[2]); + err = PTR_ERR(enc_name); + if (IS_ERR(enc_name)) goto out_put_auth; inst = kzalloc(sizeof(*inst) + sizeof(*ctx), GFP_KERNEL); err = -ENOMEM; if (!inst) - goto out_put_enc; - - err = -ENAMETOOLONG; - if (snprintf(inst->alg.cra_name, CRYPTO_MAX_ALG_NAME, - "authenc(%s,%s)", auth->cra_name, enc->cra_name) >= - CRYPTO_MAX_ALG_NAME) - goto err_free_inst; - - if (snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME, - "authenc(%s,%s)", auth->cra_driver_name, - enc->cra_driver_name) >= CRYPTO_MAX_ALG_NAME) - goto err_free_inst; + goto out_put_auth; ctx = crypto_instance_ctx(inst); @@ -313,11 +307,28 @@ static struct crypto_instance *crypto_authenc_alloc(struct rtattr **tb) if (err) goto err_free_inst; - err = crypto_init_spawn(&ctx->enc, enc, inst, CRYPTO_ALG_TYPE_MASK); + crypto_set_skcipher_spawn(&ctx->enc, inst); + err = crypto_grab_skcipher(&ctx->enc, enc_name, 0, + crypto_requires_sync(algt->type, + algt->mask)); if (err) goto err_drop_auth; - inst->alg.cra_flags = CRYPTO_ALG_TYPE_AEAD | CRYPTO_ALG_ASYNC; + enc = crypto_skcipher_spawn_alg(&ctx->enc); + + err = -ENAMETOOLONG; + if (snprintf(inst->alg.cra_name, CRYPTO_MAX_ALG_NAME, + "authenc(%s,%s)", auth->cra_name, enc->cra_name) >= + CRYPTO_MAX_ALG_NAME) + goto err_drop_enc; + + if (snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME, + "authenc(%s,%s)", auth->cra_driver_name, + enc->cra_driver_name) >= CRYPTO_MAX_ALG_NAME) + goto err_drop_enc; + + inst->alg.cra_flags = CRYPTO_ALG_TYPE_AEAD; + inst->alg.cra_flags |= enc->cra_flags & CRYPTO_ALG_ASYNC; inst->alg.cra_priority = enc->cra_priority * 10 + auth->cra_priority; inst->alg.cra_blocksize = enc->cra_blocksize; inst->alg.cra_alignmask = auth->cra_alignmask | enc->cra_alignmask; @@ -338,16 +349,16 @@ static struct crypto_instance *crypto_authenc_alloc(struct rtattr **tb) inst->alg.cra_aead.decrypt = crypto_authenc_decrypt; out: - crypto_mod_put(enc); -out_put_auth: crypto_mod_put(auth); return inst; +err_drop_enc: + crypto_drop_skcipher(&ctx->enc); err_drop_auth: crypto_drop_spawn(&ctx->auth); err_free_inst: kfree(inst); -out_put_enc: +out_put_auth: inst = ERR_PTR(err); goto out; } @@ -356,7 +367,7 @@ static void crypto_authenc_free(struct crypto_instance *inst) { struct authenc_instance_ctx *ctx = crypto_instance_ctx(inst); - crypto_drop_spawn(&ctx->enc); + crypto_drop_skcipher(&ctx->enc); crypto_drop_spawn(&ctx->auth); kfree(inst); } -- cgit v1.2.3-59-g8ed1b From d00aa19b507b39ee9a680d0d2ac2ae483686453a Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 7 Dec 2007 20:31:10 +0800 Subject: [CRYPTO] gcm: Allow block cipher parameter This patch adds the gcm_base template which takes a block cipher parameter instead of cipher. This allows the user to specify a specific CTR implementation. This also fixes a leak of the cipher algorithm that was previously looked up but never freed. Signed-off-by: Herbert Xu --- crypto/gcm.c | 113 ++++++++++++++++++++++++++++++++++++++++++++++------------- 1 file changed, 89 insertions(+), 24 deletions(-) diff --git a/crypto/gcm.c b/crypto/gcm.c index f6bee6f209a6..e87e5de8e7b3 100644 --- a/crypto/gcm.c +++ b/crypto/gcm.c @@ -413,30 +413,23 @@ static void crypto_gcm_exit_tfm(struct crypto_tfm *tfm) crypto_free_ablkcipher(ctx->ctr); } -static struct crypto_instance *crypto_gcm_alloc(struct rtattr **tb) +static struct crypto_instance *crypto_gcm_alloc_common(struct rtattr **tb, + const char *full_name, + const char *ctr_name) { + struct crypto_attr_type *algt; struct crypto_instance *inst; struct crypto_alg *ctr; - struct crypto_alg *cipher; struct gcm_instance_ctx *ctx; int err; - char ctr_name[CRYPTO_MAX_ALG_NAME]; - err = crypto_check_attr_type(tb, CRYPTO_ALG_TYPE_AEAD); - if (err) + algt = crypto_get_attr_type(tb); + err = PTR_ERR(algt); + if (IS_ERR(algt)) return ERR_PTR(err); - cipher = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_CIPHER, - CRYPTO_ALG_TYPE_MASK); - - inst = ERR_PTR(PTR_ERR(cipher)); - if (IS_ERR(cipher)) - return inst; - - inst = ERR_PTR(ENAMETOOLONG); - if (snprintf(ctr_name, CRYPTO_MAX_ALG_NAME, "ctr(%s)", - cipher->cra_name) >= CRYPTO_MAX_ALG_NAME) - return inst; + if ((algt->type ^ CRYPTO_ALG_TYPE_AEAD) & algt->mask) + return ERR_PTR(-EINVAL); ctr = crypto_alg_mod_lookup(ctr_name, CRYPTO_ALG_TYPE_BLKCIPHER, CRYPTO_ALG_TYPE_MASK); @@ -444,7 +437,14 @@ static struct crypto_instance *crypto_gcm_alloc(struct rtattr **tb) if (IS_ERR(ctr)) return ERR_PTR(PTR_ERR(ctr)); - if (cipher->cra_blocksize != 16) + /* We only support 16-byte blocks. */ + if ((ctr->cra_type == &crypto_blkcipher_type ? + ctr->cra_blkcipher.ivsize : ctr->cra_ablkcipher.ivsize) != 16) + goto out_put_ctr; + + /* Not a stream cipher? */ + err = -EINVAL; + if (ctr->cra_blocksize != 1) goto out_put_ctr; inst = kzalloc(sizeof(*inst) + sizeof(*ctx), GFP_KERNEL); @@ -453,21 +453,21 @@ static struct crypto_instance *crypto_gcm_alloc(struct rtattr **tb) goto out_put_ctr; err = -ENAMETOOLONG; - if (snprintf(inst->alg.cra_name, CRYPTO_MAX_ALG_NAME, - "gcm(%s)", cipher->cra_name) >= CRYPTO_MAX_ALG_NAME || - snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME, - "gcm(%s)", cipher->cra_driver_name) >= CRYPTO_MAX_ALG_NAME) + if (snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME, + "gcm_base(%s)", ctr->cra_driver_name) >= + CRYPTO_MAX_ALG_NAME) goto err_free_inst; - ctx = crypto_instance_ctx(inst); err = crypto_init_spawn(&ctx->ctr, ctr, inst, CRYPTO_ALG_TYPE_MASK); if (err) goto err_free_inst; + memcpy(inst->alg.cra_name, full_name, CRYPTO_MAX_ALG_NAME); + inst->alg.cra_flags = CRYPTO_ALG_TYPE_AEAD | CRYPTO_ALG_ASYNC; inst->alg.cra_priority = ctr->cra_priority; - inst->alg.cra_blocksize = 16; + inst->alg.cra_blocksize = 1; inst->alg.cra_alignmask = ctr->cra_alignmask | (__alignof__(u64) - 1); inst->alg.cra_type = &crypto_aead_type; inst->alg.cra_aead.ivsize = 16; @@ -489,6 +489,29 @@ out_put_ctr: goto out; } +static struct crypto_instance *crypto_gcm_alloc(struct rtattr **tb) +{ + int err; + const char *cipher_name; + char ctr_name[CRYPTO_MAX_ALG_NAME]; + char full_name[CRYPTO_MAX_ALG_NAME]; + + cipher_name = crypto_attr_alg_name(tb[1]); + err = PTR_ERR(cipher_name); + if (IS_ERR(cipher_name)) + return ERR_PTR(err); + + if (snprintf(ctr_name, CRYPTO_MAX_ALG_NAME, "ctr(%s)", cipher_name) >= + CRYPTO_MAX_ALG_NAME) + return ERR_PTR(-ENAMETOOLONG); + + if (snprintf(full_name, CRYPTO_MAX_ALG_NAME, "gcm(%s)", cipher_name) >= + CRYPTO_MAX_ALG_NAME) + return ERR_PTR(-ENAMETOOLONG); + + return crypto_gcm_alloc_common(tb, full_name, ctr_name); +} + static void crypto_gcm_free(struct crypto_instance *inst) { struct gcm_instance_ctx *ctx = crypto_instance_ctx(inst); @@ -504,14 +527,55 @@ static struct crypto_template crypto_gcm_tmpl = { .module = THIS_MODULE, }; +static struct crypto_instance *crypto_gcm_base_alloc(struct rtattr **tb) +{ + int err; + const char *ctr_name; + char full_name[CRYPTO_MAX_ALG_NAME]; + + ctr_name = crypto_attr_alg_name(tb[1]); + err = PTR_ERR(ctr_name); + if (IS_ERR(ctr_name)) + return ERR_PTR(err); + + if (snprintf(full_name, CRYPTO_MAX_ALG_NAME, "gcm_base(%s)", + ctr_name) >= CRYPTO_MAX_ALG_NAME) + return ERR_PTR(-ENAMETOOLONG); + + return crypto_gcm_alloc_common(tb, full_name, ctr_name); +} + +static struct crypto_template crypto_gcm_base_tmpl = { + .name = "gcm_base", + .alloc = crypto_gcm_base_alloc, + .free = crypto_gcm_free, + .module = THIS_MODULE, +}; + static int __init crypto_gcm_module_init(void) { - return crypto_register_template(&crypto_gcm_tmpl); + int err; + + err = crypto_register_template(&crypto_gcm_base_tmpl); + if (err) + goto out; + + err = crypto_register_template(&crypto_gcm_tmpl); + if (err) + goto out_undo_base; + +out: + return err; + +out_undo_base: + crypto_unregister_template(&crypto_gcm_base_tmpl); + goto out; } static void __exit crypto_gcm_module_exit(void) { crypto_unregister_template(&crypto_gcm_tmpl); + crypto_unregister_template(&crypto_gcm_base_tmpl); } module_init(crypto_gcm_module_init); @@ -520,3 +584,4 @@ module_exit(crypto_gcm_module_exit); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Galois/Counter Mode"); MODULE_AUTHOR("Mikko Herranen "); +MODULE_ALIAS("gcm_base"); -- cgit v1.2.3-59-g8ed1b From 1472e5ebaac14dafbc0f978b5e951f1e9ca0b251 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 7 Dec 2007 19:26:11 +0800 Subject: [CRYPTO] gcm: Use crypto_grab_skcipher This patch converts the gcm algorithm over to crypto_grab_skcipher which is a prerequisite for IV generation. Signed-off-by: Herbert Xu --- crypto/gcm.c | 49 +++++++++++++++++++++++-------------------------- 1 file changed, 23 insertions(+), 26 deletions(-) diff --git a/crypto/gcm.c b/crypto/gcm.c index e87e5de8e7b3..d539f5e56879 100644 --- a/crypto/gcm.c +++ b/crypto/gcm.c @@ -8,8 +8,8 @@ * by the Free Software Foundation. */ -#include #include +#include #include #include #include @@ -18,10 +18,8 @@ #include #include -#include "internal.h" - struct gcm_instance_ctx { - struct crypto_spawn ctr; + struct crypto_skcipher_spawn ctr; }; struct crypto_gcm_ctx { @@ -386,7 +384,7 @@ static int crypto_gcm_init_tfm(struct crypto_tfm *tfm) unsigned long align; int err; - ctr = crypto_spawn_ablkcipher(&ictx->ctr); + ctr = crypto_spawn_skcipher(&ictx->ctr); err = PTR_ERR(ctr); if (IS_ERR(ctr)) return err; @@ -431,15 +429,22 @@ static struct crypto_instance *crypto_gcm_alloc_common(struct rtattr **tb, if ((algt->type ^ CRYPTO_ALG_TYPE_AEAD) & algt->mask) return ERR_PTR(-EINVAL); - ctr = crypto_alg_mod_lookup(ctr_name, CRYPTO_ALG_TYPE_BLKCIPHER, - CRYPTO_ALG_TYPE_MASK); + inst = kzalloc(sizeof(*inst) + sizeof(*ctx), GFP_KERNEL); + if (!inst) + return ERR_PTR(-ENOMEM); - if (IS_ERR(ctr)) - return ERR_PTR(PTR_ERR(ctr)); + ctx = crypto_instance_ctx(inst); + crypto_set_skcipher_spawn(&ctx->ctr, inst); + err = crypto_grab_skcipher(&ctx->ctr, ctr_name, 0, + crypto_requires_sync(algt->type, + algt->mask)); + if (err) + goto err_free_inst; + + ctr = crypto_skcipher_spawn_alg(&ctx->ctr); /* We only support 16-byte blocks. */ - if ((ctr->cra_type == &crypto_blkcipher_type ? - ctr->cra_blkcipher.ivsize : ctr->cra_ablkcipher.ivsize) != 16) + if (ctr->cra_ablkcipher.ivsize != 16) goto out_put_ctr; /* Not a stream cipher? */ @@ -447,25 +452,16 @@ static struct crypto_instance *crypto_gcm_alloc_common(struct rtattr **tb, if (ctr->cra_blocksize != 1) goto out_put_ctr; - inst = kzalloc(sizeof(*inst) + sizeof(*ctx), GFP_KERNEL); - err = -ENOMEM; - if (!inst) - goto out_put_ctr; - err = -ENAMETOOLONG; if (snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME, "gcm_base(%s)", ctr->cra_driver_name) >= CRYPTO_MAX_ALG_NAME) - goto err_free_inst; - - ctx = crypto_instance_ctx(inst); - err = crypto_init_spawn(&ctx->ctr, ctr, inst, CRYPTO_ALG_TYPE_MASK); - if (err) - goto err_free_inst; + goto out_put_ctr; memcpy(inst->alg.cra_name, full_name, CRYPTO_MAX_ALG_NAME); - inst->alg.cra_flags = CRYPTO_ALG_TYPE_AEAD | CRYPTO_ALG_ASYNC; + inst->alg.cra_flags = CRYPTO_ALG_TYPE_AEAD; + inst->alg.cra_flags |= ctr->cra_flags & CRYPTO_ALG_ASYNC; inst->alg.cra_priority = ctr->cra_priority; inst->alg.cra_blocksize = 1; inst->alg.cra_alignmask = ctr->cra_alignmask | (__alignof__(u64) - 1); @@ -480,11 +476,12 @@ static struct crypto_instance *crypto_gcm_alloc_common(struct rtattr **tb, inst->alg.cra_aead.decrypt = crypto_gcm_decrypt; out: - crypto_mod_put(ctr); return inst; + +out_put_ctr: + crypto_drop_skcipher(&ctx->ctr); err_free_inst: kfree(inst); -out_put_ctr: inst = ERR_PTR(err); goto out; } @@ -516,7 +513,7 @@ static void crypto_gcm_free(struct crypto_instance *inst) { struct gcm_instance_ctx *ctx = crypto_instance_ctx(inst); - crypto_drop_spawn(&ctx->ctr); + crypto_drop_skcipher(&ctx->ctr); kfree(inst); } -- cgit v1.2.3-59-g8ed1b From 45d44eb56ad197cfccb8f84b5df64abff8b7cb96 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 2 Dec 2007 21:21:02 +1100 Subject: [CRYPTO] skcipher: Remove crypto_spawn_ablkcipher Now that gcm and authenc have been converted to crypto_spawn_skcipher, this patch removes the obsolete crypto_spawn_ablkcipher function. Signed-off-by: Herbert Xu --- include/crypto/algapi.h | 8 -------- 1 file changed, 8 deletions(-) diff --git a/include/crypto/algapi.h b/include/crypto/algapi.h index fda1759ffe2d..60d06e784be3 100644 --- a/include/crypto/algapi.h +++ b/include/crypto/algapi.h @@ -198,14 +198,6 @@ static inline struct crypto_instance *crypto_aead_alg_instance( return crypto_tfm_alg_instance(&aead->base); } -static inline struct crypto_ablkcipher *crypto_spawn_ablkcipher( - struct crypto_spawn *spawn) -{ - return __crypto_ablkcipher_cast( - crypto_spawn_tfm(spawn, crypto_skcipher_type(0), - crypto_skcipher_mask(0))); -} - static inline struct crypto_blkcipher *crypto_spawn_blkcipher( struct crypto_spawn *spawn) { -- cgit v1.2.3-59-g8ed1b From 0a270321dbf948963aeb0e8382fe17d2c2eb3771 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 30 Nov 2007 21:38:37 +1100 Subject: [CRYPTO] seqiv: Add Sequence Number IV Generator This generator generates an IV based on a sequence number by xoring it with a salt. This algorithm is mainly useful for CTR and similar modes. This patch also sets it as the default IV generator for ctr. Signed-off-by: Herbert Xu --- crypto/Kconfig | 9 +++ crypto/Makefile | 1 + crypto/ctr.c | 2 + crypto/seqiv.c | 186 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 198 insertions(+) create mode 100644 crypto/seqiv.c diff --git a/crypto/Kconfig b/crypto/Kconfig index c4b6c9125582..7ad9711eec98 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -32,6 +32,14 @@ config CRYPTO_BLKCIPHER tristate select CRYPTO_ALGAPI +config CRYPTO_SEQIV + tristate "Sequence Number IV Generator" + select CRYPTO_BLKCIPHER + help + This IV generator generates an IV based on a sequence number by + xoring it with a salt. This algorithm is mainly useful for CTR + and similar modes. + config CRYPTO_HASH tristate select CRYPTO_ALGAPI @@ -197,6 +205,7 @@ config CRYPTO_XTS config CRYPTO_CTR tristate "CTR support" select CRYPTO_BLKCIPHER + select CRYPTO_SEQIV select CRYPTO_MANAGER help CTR: Counter mode diff --git a/crypto/Makefile b/crypto/Makefile index 968b796d9e6c..1b99b3a1310c 100644 --- a/crypto/Makefile +++ b/crypto/Makefile @@ -15,6 +15,7 @@ crypto_blkcipher-objs += blkcipher.o obj-$(CONFIG_CRYPTO_BLKCIPHER) += crypto_blkcipher.o obj-$(CONFIG_CRYPTO_BLKCIPHER) += chainiv.o obj-$(CONFIG_CRYPTO_BLKCIPHER) += eseqiv.o +obj-$(CONFIG_CRYPTO_SEQIV) += seqiv.o crypto_hash-objs := hash.o obj-$(CONFIG_CRYPTO_HASH) += crypto_hash.o diff --git a/crypto/ctr.c b/crypto/ctr.c index 1052b318aed2..2d7425f0e7b8 100644 --- a/crypto/ctr.c +++ b/crypto/ctr.c @@ -361,6 +361,8 @@ static struct crypto_instance *crypto_rfc3686_alloc(struct rtattr **tb) inst->alg.cra_blkcipher.max_keysize = alg->cra_blkcipher.max_keysize + CTR_RFC3686_NONCE_SIZE; + inst->alg.cra_blkcipher.geniv = "seqiv"; + inst->alg.cra_ctxsize = sizeof(struct crypto_rfc3686_ctx); inst->alg.cra_init = crypto_rfc3686_init_tfm; diff --git a/crypto/seqiv.c b/crypto/seqiv.c new file mode 100644 index 000000000000..9c2d80d77a0a --- /dev/null +++ b/crypto/seqiv.c @@ -0,0 +1,186 @@ +/* + * seqiv: Sequence Number IV Generator + * + * This generator generates an IV based on a sequence number by xoring it + * with a salt. This algorithm is mainly useful for CTR and similar modes. + * + * Copyright (c) 2007 Herbert Xu + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +struct seqiv_ctx { + spinlock_t lock; + u8 salt[] __attribute__ ((aligned(__alignof__(u32)))); +}; + +static void seqiv_complete2(struct skcipher_givcrypt_request *req, int err) +{ + struct ablkcipher_request *subreq = skcipher_givcrypt_reqctx(req); + struct crypto_ablkcipher *geniv; + + if (err == -EINPROGRESS) + return; + + if (err) + goto out; + + geniv = skcipher_givcrypt_reqtfm(req); + memcpy(req->creq.info, subreq->info, crypto_ablkcipher_ivsize(geniv)); + +out: + kfree(subreq->info); +} + +static void seqiv_complete(struct crypto_async_request *base, int err) +{ + struct skcipher_givcrypt_request *req = base->data; + + seqiv_complete2(req, err); + skcipher_givcrypt_complete(req, err); +} + +static int seqiv_givencrypt(struct skcipher_givcrypt_request *req) +{ + struct crypto_ablkcipher *geniv = skcipher_givcrypt_reqtfm(req); + struct seqiv_ctx *ctx = crypto_ablkcipher_ctx(geniv); + struct ablkcipher_request *subreq = skcipher_givcrypt_reqctx(req); + crypto_completion_t complete; + void *data; + u8 *info; + __be64 seq; + unsigned int ivsize; + unsigned int len; + int err; + + ablkcipher_request_set_tfm(subreq, skcipher_geniv_cipher(geniv)); + + complete = req->creq.base.complete; + data = req->creq.base.data; + info = req->creq.info; + + ivsize = crypto_ablkcipher_ivsize(geniv); + + if (unlikely(!IS_ALIGNED((unsigned long)info, + crypto_ablkcipher_alignmask(geniv) + 1))) { + info = kmalloc(ivsize, req->creq.base.flags & + CRYPTO_TFM_REQ_MAY_SLEEP ? GFP_KERNEL: + GFP_ATOMIC); + if (!info) + return -ENOMEM; + + complete = seqiv_complete; + data = req; + } + + ablkcipher_request_set_callback(subreq, req->creq.base.flags, complete, + data); + ablkcipher_request_set_crypt(subreq, req->creq.src, req->creq.dst, + req->creq.nbytes, info); + + len = ivsize; + if (ivsize > sizeof(u64)) { + memset(info, 0, ivsize - sizeof(u64)); + len = sizeof(u64); + } + seq = cpu_to_be64(req->seq); + memcpy(info + ivsize - len, &seq, len); + crypto_xor(info, ctx->salt, ivsize); + + memcpy(req->giv, info, ivsize); + + err = crypto_ablkcipher_encrypt(subreq); + if (unlikely(info != req->creq.info)) + seqiv_complete2(req, err); + return err; +} + +static int seqiv_givencrypt_first(struct skcipher_givcrypt_request *req) +{ + struct crypto_ablkcipher *geniv = skcipher_givcrypt_reqtfm(req); + struct seqiv_ctx *ctx = crypto_ablkcipher_ctx(geniv); + + spin_lock_bh(&ctx->lock); + if (crypto_ablkcipher_crt(geniv)->givencrypt != seqiv_givencrypt_first) + goto unlock; + + crypto_ablkcipher_crt(geniv)->givencrypt = seqiv_givencrypt; + get_random_bytes(ctx->salt, crypto_ablkcipher_ivsize(geniv)); + +unlock: + spin_unlock_bh(&ctx->lock); + + return seqiv_givencrypt(req); +} + +static int seqiv_init(struct crypto_tfm *tfm) +{ + struct crypto_ablkcipher *geniv = __crypto_ablkcipher_cast(tfm); + struct seqiv_ctx *ctx = crypto_ablkcipher_ctx(geniv); + + spin_lock_init(&ctx->lock); + + tfm->crt_ablkcipher.reqsize = sizeof(struct ablkcipher_request); + + return skcipher_geniv_init(tfm); +} + +static struct crypto_template seqiv_tmpl; + +static struct crypto_instance *seqiv_alloc(struct rtattr **tb) +{ + struct crypto_instance *inst; + + inst = skcipher_geniv_alloc(&seqiv_tmpl, tb, 0, 0); + if (IS_ERR(inst)) + goto out; + + inst->alg.cra_ablkcipher.givencrypt = seqiv_givencrypt_first; + + inst->alg.cra_init = seqiv_init; + inst->alg.cra_exit = skcipher_geniv_exit; + + inst->alg.cra_alignmask |= __alignof__(u32) - 1; + + inst->alg.cra_ctxsize = sizeof(struct seqiv_ctx); + inst->alg.cra_ctxsize += inst->alg.cra_ablkcipher.ivsize; + +out: + return inst; +} + +static struct crypto_template seqiv_tmpl = { + .name = "seqiv", + .alloc = seqiv_alloc, + .free = skcipher_geniv_free, + .module = THIS_MODULE, +}; + +static int __init seqiv_module_init(void) +{ + return crypto_register_template(&seqiv_tmpl); +} + +static void __exit seqiv_module_exit(void) +{ + crypto_unregister_template(&seqiv_tmpl); +} + +module_init(seqiv_module_init); +module_exit(seqiv_module_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Sequence Number IV Generator"); -- cgit v1.2.3-59-g8ed1b From 03bf712fb4defc7831c727d1e32d0269f7f96de0 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sat, 1 Dec 2007 18:35:38 +1100 Subject: [CRYPTO] skcipher: Add top-level givencrypt/givdecrypt calls This patch finally makes the givencrypt/givdecrypt operations available to users by adding crypto_skcipher_givencrypt and crypto_skcipher_givdecrypt. A suite of helpers to allocate and fill in the request is also available. Signed-off-by: Herbert Xu --- include/crypto/skcipher.h | 72 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+) diff --git a/include/crypto/skcipher.h b/include/crypto/skcipher.h index c283fab5eddb..25fd6126522d 100644 --- a/include/crypto/skcipher.h +++ b/include/crypto/skcipher.h @@ -14,6 +14,8 @@ #define _CRYPTO_SKCIPHER_H #include +#include +#include /** * struct skcipher_givcrypt_request - Crypto request with IV generation @@ -34,5 +36,75 @@ static inline struct crypto_ablkcipher *skcipher_givcrypt_reqtfm( return crypto_ablkcipher_reqtfm(&req->creq); } +static inline int crypto_skcipher_givencrypt( + struct skcipher_givcrypt_request *req) +{ + struct ablkcipher_tfm *crt = + crypto_ablkcipher_crt(skcipher_givcrypt_reqtfm(req)); + return crt->givencrypt(req); +}; + +static inline int crypto_skcipher_givdecrypt( + struct skcipher_givcrypt_request *req) +{ + struct ablkcipher_tfm *crt = + crypto_ablkcipher_crt(skcipher_givcrypt_reqtfm(req)); + return crt->givdecrypt(req); +}; + +static inline void skcipher_givcrypt_set_tfm( + struct skcipher_givcrypt_request *req, struct crypto_ablkcipher *tfm) +{ + req->creq.base.tfm = crypto_ablkcipher_tfm(tfm); +} + +static inline struct skcipher_givcrypt_request *skcipher_givcrypt_cast( + struct crypto_async_request *req) +{ + return container_of(ablkcipher_request_cast(req), + struct skcipher_givcrypt_request, creq); +} + +static inline struct skcipher_givcrypt_request *skcipher_givcrypt_alloc( + struct crypto_ablkcipher *tfm, gfp_t gfp) +{ + struct skcipher_givcrypt_request *req; + + req = kmalloc(sizeof(struct skcipher_givcrypt_request) + + crypto_ablkcipher_reqsize(tfm), gfp); + + if (likely(req)) + skcipher_givcrypt_set_tfm(req, tfm); + + return req; +} + +static inline void skcipher_givcrypt_free(struct skcipher_givcrypt_request *req) +{ + kfree(req); +} + +static inline void skcipher_givcrypt_set_callback( + struct skcipher_givcrypt_request *req, u32 flags, + crypto_completion_t complete, void *data) +{ + ablkcipher_request_set_callback(&req->creq, flags, complete, data); +} + +static inline void skcipher_givcrypt_set_crypt( + struct skcipher_givcrypt_request *req, + struct scatterlist *src, struct scatterlist *dst, + unsigned int nbytes, void *iv) +{ + ablkcipher_request_set_crypt(&req->creq, src, dst, nbytes, iv); +} + +static inline void skcipher_givcrypt_set_giv( + struct skcipher_givcrypt_request *req, u8 *giv, u64 seq) +{ + req->giv = giv; + req->seq = seq; +} + #endif /* _CRYPTO_SKCIPHER_H */ -- cgit v1.2.3-59-g8ed1b From 743edf57272fd420348e148bf94f9e48ed6abb70 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 10 Dec 2007 16:18:01 +0800 Subject: [CRYPTO] aead: Add givcrypt operations This patch adds the underlying givcrypt operations for aead and associated support elements. The rationale is identical to that of the skcipher givcrypt operations, i.e., sometimes only the algorithm knows how the IV should be generated. A new request type aead_givcrypt_request is added which contains an embedded aead_request structure with two new elements to support this operation. The new elements are seq and giv. The seq field should contain a strictly increasing 64-bit integer which may be used by certain IV generators as an input value. The giv field will be used to store the generated IV. It does not need to obey the alignment requirements of the algorithm because it's not used during the operation. The existing iv field must still be available as it will be used to store intermediate IVs and the output IV if chaining is desired. Signed-off-by: Herbert Xu --- crypto/aead.c | 7 +++++++ include/crypto/aead.h | 38 ++++++++++++++++++++++++++++++++++++++ include/linux/crypto.h | 5 +++++ 3 files changed, 50 insertions(+) create mode 100644 include/crypto/aead.h diff --git a/crypto/aead.c b/crypto/aead.c index f23c2b0ee009..0402b606fcfd 100644 --- a/crypto/aead.c +++ b/crypto/aead.c @@ -77,6 +77,11 @@ static unsigned int crypto_aead_ctxsize(struct crypto_alg *alg, u32 type, return alg->cra_ctxsize; } +static int no_givdecrypt(struct aead_givcrypt_request *req) +{ + return -ENOSYS; +} + static int crypto_init_aead_ops(struct crypto_tfm *tfm, u32 type, u32 mask) { struct aead_alg *alg = &tfm->__crt_alg->cra_aead; @@ -88,6 +93,8 @@ static int crypto_init_aead_ops(struct crypto_tfm *tfm, u32 type, u32 mask) crt->setkey = setkey; crt->encrypt = alg->encrypt; crt->decrypt = alg->decrypt; + crt->givencrypt = alg->givencrypt; + crt->givdecrypt = alg->givdecrypt ?: no_givdecrypt; crt->ivsize = alg->ivsize; crt->authsize = alg->maxauthsize; diff --git a/include/crypto/aead.h b/include/crypto/aead.h new file mode 100644 index 000000000000..083920312da0 --- /dev/null +++ b/include/crypto/aead.h @@ -0,0 +1,38 @@ +/* + * AEAD: Authenticated Encryption with Associated Data + * + * Copyright (c) 2007 Herbert Xu + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ + +#ifndef _CRYPTO_AEAD_H +#define _CRYPTO_AEAD_H + +#include +#include + +/** + * struct aead_givcrypt_request - AEAD request with IV generation + * @seq: Sequence number for IV generation + * @giv: Space for generated IV + * @areq: The AEAD request itself + */ +struct aead_givcrypt_request { + u64 seq; + u8 *giv; + + struct aead_request areq; +}; + +static inline struct crypto_aead *aead_givcrypt_reqtfm( + struct aead_givcrypt_request *req) +{ + return crypto_aead_reqtfm(&req->areq); +} + +#endif /* _CRYPTO_AEAD_H */ diff --git a/include/linux/crypto.h b/include/linux/crypto.h index 835dcaf3fe4e..7524928bff93 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -106,6 +106,7 @@ struct crypto_blkcipher; struct crypto_hash; struct crypto_tfm; struct crypto_type; +struct aead_givcrypt_request; struct skcipher_givcrypt_request; typedef void (*crypto_completion_t)(struct crypto_async_request *req, int err); @@ -202,6 +203,8 @@ struct aead_alg { int (*setauthsize)(struct crypto_aead *tfm, unsigned int authsize); int (*encrypt)(struct aead_request *req); int (*decrypt)(struct aead_request *req); + int (*givencrypt)(struct aead_givcrypt_request *req); + int (*givdecrypt)(struct aead_givcrypt_request *req); unsigned int ivsize; unsigned int maxauthsize; @@ -348,6 +351,8 @@ struct aead_tfm { unsigned int keylen); int (*encrypt)(struct aead_request *req); int (*decrypt)(struct aead_request *req); + int (*givencrypt)(struct aead_givcrypt_request *req); + int (*givdecrypt)(struct aead_givcrypt_request *req); unsigned int ivsize; unsigned int authsize; unsigned int reqsize; -- cgit v1.2.3-59-g8ed1b From e56dd56418fcc024683d1638564a494d9e9aab85 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 10 Dec 2007 16:20:24 +0800 Subject: [CRYPTO] authenc: Add givencrypt operation This patch implements the givencrypt function for authenc. It simply calls the givencrypt operation on the underlying cipher instead of encrypt. Signed-off-by: Herbert Xu --- crypto/authenc.c | 136 ++++++++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 114 insertions(+), 22 deletions(-) diff --git a/crypto/authenc.c b/crypto/authenc.c index 2d609b72f5be..ed8ac5a6fa5f 100644 --- a/crypto/authenc.c +++ b/crypto/authenc.c @@ -10,6 +10,7 @@ * */ +#include #include #include #include @@ -87,6 +88,20 @@ badkey: goto out; } +static void authenc_chain(struct scatterlist *head, struct scatterlist *sg, + int chain) +{ + if (chain) { + head->length += sg->length; + sg = scatterwalk_sg_next(sg); + } + + if (sg) + scatterwalk_sg_chain(head, 2, sg); + else + sg_mark_end(head); +} + static u8 *crypto_authenc_hash(struct aead_request *req, unsigned int flags, struct scatterlist *cipher, unsigned int cryptlen) @@ -127,18 +142,31 @@ auth_unlock: return hash; } -static int crypto_authenc_genicv(struct aead_request *req, unsigned int flags) +static int crypto_authenc_genicv(struct aead_request *req, u8 *iv, + unsigned int flags) { struct crypto_aead *authenc = crypto_aead_reqtfm(req); struct scatterlist *dst = req->dst; - unsigned int cryptlen = req->cryptlen; + struct scatterlist cipher[2]; + struct page *dstp; + unsigned int ivsize = crypto_aead_ivsize(authenc); + unsigned int cryptlen; + u8 *vdst; u8 *hash; - hash = crypto_authenc_hash(req, flags, dst, cryptlen); + dstp = sg_page(dst); + vdst = PageHighMem(dstp) ? NULL : page_address(dstp) + dst->offset; + + sg_init_table(cipher, 2); + sg_set_buf(cipher, iv, ivsize); + authenc_chain(cipher, dst, vdst == iv + ivsize); + + cryptlen = req->cryptlen + ivsize; + hash = crypto_authenc_hash(req, flags, cipher, cryptlen); if (IS_ERR(hash)) return PTR_ERR(hash); - scatterwalk_map_and_copy(hash, dst, cryptlen, + scatterwalk_map_and_copy(hash, cipher, cryptlen, crypto_aead_authsize(authenc), 1); return 0; } @@ -146,8 +174,16 @@ static int crypto_authenc_genicv(struct aead_request *req, unsigned int flags) static void crypto_authenc_encrypt_done(struct crypto_async_request *req, int err) { - if (!err) - err = crypto_authenc_genicv(req->data, 0); + if (!err) { + struct aead_request *areq = req->data; + struct crypto_aead *authenc = crypto_aead_reqtfm(areq); + struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc); + struct ablkcipher_request *abreq = aead_request_ctx(areq); + u8 *iv = (u8 *)(abreq + 1) + + crypto_ablkcipher_reqsize(ctx->enc); + + err = crypto_authenc_genicv(areq, iv, 0); + } aead_request_complete(req->data, err); } @@ -157,45 +193,99 @@ static int crypto_authenc_encrypt(struct aead_request *req) struct crypto_aead *authenc = crypto_aead_reqtfm(req); struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc); struct ablkcipher_request *abreq = aead_request_ctx(req); + struct crypto_ablkcipher *enc = ctx->enc; + struct scatterlist *dst = req->dst; + unsigned int cryptlen = req->cryptlen; + u8 *iv = (u8 *)(abreq + 1) + crypto_ablkcipher_reqsize(enc); int err; - ablkcipher_request_set_tfm(abreq, ctx->enc); + ablkcipher_request_set_tfm(abreq, enc); ablkcipher_request_set_callback(abreq, aead_request_flags(req), crypto_authenc_encrypt_done, req); - ablkcipher_request_set_crypt(abreq, req->src, req->dst, req->cryptlen, - req->iv); + ablkcipher_request_set_crypt(abreq, req->src, dst, cryptlen, req->iv); + + memcpy(iv, req->iv, crypto_aead_ivsize(authenc)); err = crypto_ablkcipher_encrypt(abreq); if (err) return err; - return crypto_authenc_genicv(req, CRYPTO_TFM_REQ_MAY_SLEEP); + return crypto_authenc_genicv(req, iv, CRYPTO_TFM_REQ_MAY_SLEEP); +} + +static void crypto_authenc_givencrypt_done(struct crypto_async_request *req, + int err) +{ + if (!err) { + struct aead_givcrypt_request *greq = req->data; + + err = crypto_authenc_genicv(&greq->areq, greq->giv, 0); + } + + aead_request_complete(req->data, err); +} + +static int crypto_authenc_givencrypt(struct aead_givcrypt_request *req) +{ + struct crypto_aead *authenc = aead_givcrypt_reqtfm(req); + struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc); + struct aead_request *areq = &req->areq; + struct skcipher_givcrypt_request *greq = aead_request_ctx(areq); + u8 *iv = req->giv; + int err; + + skcipher_givcrypt_set_tfm(greq, ctx->enc); + skcipher_givcrypt_set_callback(greq, aead_request_flags(areq), + crypto_authenc_givencrypt_done, areq); + skcipher_givcrypt_set_crypt(greq, areq->src, areq->dst, areq->cryptlen, + areq->iv); + skcipher_givcrypt_set_giv(greq, iv, req->seq); + + err = crypto_skcipher_givencrypt(greq); + if (err) + return err; + + return crypto_authenc_genicv(areq, iv, CRYPTO_TFM_REQ_MAY_SLEEP); } static int crypto_authenc_verify(struct aead_request *req, + struct scatterlist *cipher, unsigned int cryptlen) { struct crypto_aead *authenc = crypto_aead_reqtfm(req); u8 *ohash; u8 *ihash; - struct scatterlist *src = req->src; unsigned int authsize; - ohash = crypto_authenc_hash(req, CRYPTO_TFM_REQ_MAY_SLEEP, src, + ohash = crypto_authenc_hash(req, CRYPTO_TFM_REQ_MAY_SLEEP, cipher, cryptlen); if (IS_ERR(ohash)) return PTR_ERR(ohash); authsize = crypto_aead_authsize(authenc); ihash = ohash + authsize; - scatterwalk_map_and_copy(ihash, src, cryptlen, authsize, 0); + scatterwalk_map_and_copy(ihash, cipher, cryptlen, authsize, 0); return memcmp(ihash, ohash, authsize) ? -EBADMSG: 0; } -static void crypto_authenc_decrypt_done(struct crypto_async_request *req, - int err) +static int crypto_authenc_iverify(struct aead_request *req, u8 *iv, + unsigned int cryptlen) { - aead_request_complete(req->data, err); + struct crypto_aead *authenc = crypto_aead_reqtfm(req); + struct scatterlist *src = req->src; + struct scatterlist cipher[2]; + struct page *srcp; + unsigned int ivsize = crypto_aead_ivsize(authenc); + u8 *vsrc; + + srcp = sg_page(src); + vsrc = PageHighMem(srcp) ? NULL : page_address(srcp) + src->offset; + + sg_init_table(cipher, 2); + sg_set_buf(cipher, iv, ivsize); + authenc_chain(cipher, src, vsrc == iv + ivsize); + + return crypto_authenc_verify(req, cipher, cryptlen + ivsize); } static int crypto_authenc_decrypt(struct aead_request *req) @@ -205,21 +295,21 @@ static int crypto_authenc_decrypt(struct aead_request *req) struct ablkcipher_request *abreq = aead_request_ctx(req); unsigned int cryptlen = req->cryptlen; unsigned int authsize = crypto_aead_authsize(authenc); + u8 *iv = req->iv; int err; if (cryptlen < authsize) return -EINVAL; cryptlen -= authsize; - err = crypto_authenc_verify(req, cryptlen); + err = crypto_authenc_iverify(req, iv, cryptlen); if (err) return err; ablkcipher_request_set_tfm(abreq, ctx->enc); ablkcipher_request_set_callback(abreq, aead_request_flags(req), - crypto_authenc_decrypt_done, req); - ablkcipher_request_set_crypt(abreq, req->src, req->dst, cryptlen, - req->iv); + req->base.complete, req->base.data); + ablkcipher_request_set_crypt(abreq, req->src, req->dst, cryptlen, iv); return crypto_ablkcipher_decrypt(abreq); } @@ -248,8 +338,9 @@ static int crypto_authenc_init_tfm(struct crypto_tfm *tfm) (crypto_hash_alignmask(auth) & ~(crypto_tfm_ctx_alignment() - 1)) + crypto_hash_digestsize(auth) * 2, - sizeof(struct ablkcipher_request) + - crypto_ablkcipher_reqsize(enc)); + sizeof(struct skcipher_givcrypt_request) + + crypto_ablkcipher_reqsize(enc) + + crypto_ablkcipher_ivsize(enc)); spin_lock_init(&ctx->auth_lock); @@ -347,6 +438,7 @@ static struct crypto_instance *crypto_authenc_alloc(struct rtattr **tb) inst->alg.cra_aead.setkey = crypto_authenc_setkey; inst->alg.cra_aead.encrypt = crypto_authenc_encrypt; inst->alg.cra_aead.decrypt = crypto_authenc_decrypt; + inst->alg.cra_aead.givencrypt = crypto_authenc_givencrypt; out: crypto_mod_put(auth); -- cgit v1.2.3-59-g8ed1b From 3a282bd2e77966e7361fffbd5d1cea6eb0499b6c Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sat, 8 Dec 2007 20:13:15 +0800 Subject: [CRYPTO] aead: Add top-level givencrypt/givdecrypt calls This patch finally makes the givencrypt/givdecrypt operations available to users by adding crypto_aead_givencrypt and crypto_aead_givdecrypt. A suite of helpers to allocate and fill in the request is also available. Signed-off-by: Herbert Xu --- include/crypto/aead.h | 67 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 67 insertions(+) diff --git a/include/crypto/aead.h b/include/crypto/aead.h index 083920312da0..0edf949f6369 100644 --- a/include/crypto/aead.h +++ b/include/crypto/aead.h @@ -15,6 +15,7 @@ #include #include +#include /** * struct aead_givcrypt_request - AEAD request with IV generation @@ -35,4 +36,70 @@ static inline struct crypto_aead *aead_givcrypt_reqtfm( return crypto_aead_reqtfm(&req->areq); } +static inline int crypto_aead_givencrypt(struct aead_givcrypt_request *req) +{ + struct aead_tfm *crt = crypto_aead_crt(aead_givcrypt_reqtfm(req)); + return crt->givencrypt(req); +}; + +static inline int crypto_aead_givdecrypt(struct aead_givcrypt_request *req) +{ + struct aead_tfm *crt = crypto_aead_crt(aead_givcrypt_reqtfm(req)); + return crt->givdecrypt(req); +}; + +static inline void aead_givcrypt_set_tfm(struct aead_givcrypt_request *req, + struct crypto_aead *tfm) +{ + req->areq.base.tfm = crypto_aead_tfm(tfm); +} + +static inline struct aead_givcrypt_request *aead_givcrypt_alloc( + struct crypto_aead *tfm, gfp_t gfp) +{ + struct aead_givcrypt_request *req; + + req = kmalloc(sizeof(struct aead_givcrypt_request) + + crypto_aead_reqsize(tfm), gfp); + + if (likely(req)) + aead_givcrypt_set_tfm(req, tfm); + + return req; +} + +static inline void aead_givcrypt_free(struct aead_givcrypt_request *req) +{ + kfree(req); +} + +static inline void aead_givcrypt_set_callback( + struct aead_givcrypt_request *req, u32 flags, + crypto_completion_t complete, void *data) +{ + aead_request_set_callback(&req->areq, flags, complete, data); +} + +static inline void aead_givcrypt_set_crypt(struct aead_givcrypt_request *req, + struct scatterlist *src, + struct scatterlist *dst, + unsigned int nbytes, void *iv) +{ + aead_request_set_crypt(&req->areq, src, dst, nbytes, iv); +} + +static inline void aead_givcrypt_set_assoc(struct aead_givcrypt_request *req, + struct scatterlist *assoc, + unsigned int assoclen) +{ + aead_request_set_assoc(&req->areq, assoc, assoclen); +} + +static inline void aead_givcrypt_set_giv(struct aead_givcrypt_request *req, + u8 *giv, u64 seq) +{ + req->giv = giv; + req->seq = seq; +} + #endif /* _CRYPTO_AEAD_H */ -- cgit v1.2.3-59-g8ed1b From aedb30dc49eeecd48558b601c47e0b3f9e42c602 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Wed, 12 Dec 2007 19:27:25 +0800 Subject: [CRYPTO] aead: Allow algorithms with no givcrypt support Some algorithms always require manual IV construction. For instance, the generic CCM algorithm requires the first byte of the IV to be manually constructed. Such algorithms are always used by other algorithms equipped with their own IV generators and do not need IV generation per se. Signed-off-by: Herbert Xu --- crypto/aead.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/crypto/aead.c b/crypto/aead.c index 0402b606fcfd..15335ed9010a 100644 --- a/crypto/aead.c +++ b/crypto/aead.c @@ -77,7 +77,7 @@ static unsigned int crypto_aead_ctxsize(struct crypto_alg *alg, u32 type, return alg->cra_ctxsize; } -static int no_givdecrypt(struct aead_givcrypt_request *req) +static int no_givcrypt(struct aead_givcrypt_request *req) { return -ENOSYS; } @@ -93,8 +93,8 @@ static int crypto_init_aead_ops(struct crypto_tfm *tfm, u32 type, u32 mask) crt->setkey = setkey; crt->encrypt = alg->encrypt; crt->decrypt = alg->decrypt; - crt->givencrypt = alg->givencrypt; - crt->givdecrypt = alg->givdecrypt ?: no_givdecrypt; + crt->givencrypt = alg->givencrypt ?: no_givcrypt; + crt->givdecrypt = alg->givdecrypt ?: no_givcrypt; crt->ivsize = alg->ivsize; crt->authsize = alg->maxauthsize; -- cgit v1.2.3-59-g8ed1b From 5b6d2d7fdf806f2b5a9352416f9e670911fc4748 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Wed, 12 Dec 2007 19:23:36 +0800 Subject: [CRYPTO] aead: Add aead_geniv_alloc/aead_geniv_free This patch creates the infrastructure to help the construction of IV generator templates that wrap around AEAD algorithms by adding an IV generator to them. This is useful for AEAD algorithms with no built-in IV generator or to replace their built-in generator. Signed-off-by: Herbert Xu --- crypto/aead.c | 216 ++++++++++++++++++++++++++++++++++++++++- include/crypto/internal/aead.h | 77 +++++++++++++++ include/linux/crypto.h | 11 ++- 3 files changed, 297 insertions(+), 7 deletions(-) create mode 100644 include/crypto/internal/aead.h diff --git a/crypto/aead.c b/crypto/aead.c index 15335ed9010a..9f7aca891926 100644 --- a/crypto/aead.c +++ b/crypto/aead.c @@ -12,14 +12,16 @@ * */ -#include -#include +#include +#include #include #include #include #include #include +#include "internal.h" + static int setkey_unaligned(struct crypto_aead *tfm, const u8 *key, unsigned int keylen) { @@ -55,18 +57,20 @@ static int setkey(struct crypto_aead *tfm, const u8 *key, unsigned int keylen) int crypto_aead_setauthsize(struct crypto_aead *tfm, unsigned int authsize) { + struct aead_tfm *crt = crypto_aead_crt(tfm); int err; if (authsize > crypto_aead_alg(tfm)->maxauthsize) return -EINVAL; if (crypto_aead_alg(tfm)->setauthsize) { - err = crypto_aead_alg(tfm)->setauthsize(tfm, authsize); + err = crypto_aead_alg(tfm)->setauthsize(crt->base, authsize); if (err) return err; } - crypto_aead_crt(tfm)->authsize = authsize; + crypto_aead_crt(crt->base)->authsize = authsize; + crt->authsize = authsize; return 0; } EXPORT_SYMBOL_GPL(crypto_aead_setauthsize); @@ -90,11 +94,13 @@ static int crypto_init_aead_ops(struct crypto_tfm *tfm, u32 type, u32 mask) if (max(alg->maxauthsize, alg->ivsize) > PAGE_SIZE / 8) return -EINVAL; - crt->setkey = setkey; + crt->setkey = tfm->__crt_alg->cra_flags & CRYPTO_ALG_GENIV ? + alg->setkey : setkey; crt->encrypt = alg->encrypt; crt->decrypt = alg->decrypt; crt->givencrypt = alg->givencrypt ?: no_givcrypt; crt->givdecrypt = alg->givdecrypt ?: no_givcrypt; + crt->base = __crypto_aead_cast(tfm); crt->ivsize = alg->ivsize; crt->authsize = alg->maxauthsize; @@ -111,6 +117,7 @@ static void crypto_aead_show(struct seq_file *m, struct crypto_alg *alg) seq_printf(m, "blocksize : %u\n", alg->cra_blocksize); seq_printf(m, "ivsize : %u\n", aead->ivsize); seq_printf(m, "maxauthsize : %u\n", aead->maxauthsize); + seq_printf(m, "geniv : %s\n", aead->geniv ?: ""); } const struct crypto_type crypto_aead_type = { @@ -122,5 +129,204 @@ const struct crypto_type crypto_aead_type = { }; EXPORT_SYMBOL_GPL(crypto_aead_type); +static int aead_null_givencrypt(struct aead_givcrypt_request *req) +{ + return crypto_aead_encrypt(&req->areq); +} + +static int aead_null_givdecrypt(struct aead_givcrypt_request *req) +{ + return crypto_aead_decrypt(&req->areq); +} + +static int crypto_init_nivaead_ops(struct crypto_tfm *tfm, u32 type, u32 mask) +{ + struct aead_alg *alg = &tfm->__crt_alg->cra_aead; + struct aead_tfm *crt = &tfm->crt_aead; + + if (max(alg->maxauthsize, alg->ivsize) > PAGE_SIZE / 8) + return -EINVAL; + + crt->setkey = setkey; + crt->encrypt = alg->encrypt; + crt->decrypt = alg->decrypt; + if (!alg->ivsize) { + crt->givencrypt = aead_null_givencrypt; + crt->givdecrypt = aead_null_givdecrypt; + } + crt->base = __crypto_aead_cast(tfm); + crt->ivsize = alg->ivsize; + crt->authsize = alg->maxauthsize; + + return 0; +} + +static void crypto_nivaead_show(struct seq_file *m, struct crypto_alg *alg) + __attribute__ ((unused)); +static void crypto_nivaead_show(struct seq_file *m, struct crypto_alg *alg) +{ + struct aead_alg *aead = &alg->cra_aead; + + seq_printf(m, "type : nivaead\n"); + seq_printf(m, "blocksize : %u\n", alg->cra_blocksize); + seq_printf(m, "ivsize : %u\n", aead->ivsize); + seq_printf(m, "maxauthsize : %u\n", aead->maxauthsize); + seq_printf(m, "geniv : %s\n", aead->geniv); +} + +const struct crypto_type crypto_nivaead_type = { + .ctxsize = crypto_aead_ctxsize, + .init = crypto_init_nivaead_ops, +#ifdef CONFIG_PROC_FS + .show = crypto_nivaead_show, +#endif +}; +EXPORT_SYMBOL_GPL(crypto_nivaead_type); + +static int crypto_grab_nivaead(struct crypto_aead_spawn *spawn, + const char *name, u32 type, u32 mask) +{ + struct crypto_alg *alg; + int err; + + type &= ~(CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_GENIV); + type |= CRYPTO_ALG_TYPE_AEAD; + mask |= CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_GENIV; + + alg = crypto_alg_mod_lookup(name, type, mask); + if (IS_ERR(alg)) + return PTR_ERR(alg); + + err = crypto_init_spawn(&spawn->base, alg, spawn->base.inst, mask); + crypto_mod_put(alg); + return err; +} + +struct crypto_instance *aead_geniv_alloc(struct crypto_template *tmpl, + struct rtattr **tb, u32 type, + u32 mask) +{ + const char *name; + struct crypto_aead_spawn *spawn; + struct crypto_attr_type *algt; + struct crypto_instance *inst; + struct crypto_alg *alg; + int err; + + algt = crypto_get_attr_type(tb); + err = PTR_ERR(algt); + if (IS_ERR(algt)) + return ERR_PTR(err); + + if ((algt->type ^ (CRYPTO_ALG_TYPE_AEAD | CRYPTO_ALG_GENIV)) & + algt->mask) + return ERR_PTR(-EINVAL); + + name = crypto_attr_alg_name(tb[1]); + err = PTR_ERR(name); + if (IS_ERR(name)) + return ERR_PTR(err); + + inst = kzalloc(sizeof(*inst) + sizeof(*spawn), GFP_KERNEL); + if (!inst) + return ERR_PTR(-ENOMEM); + + spawn = crypto_instance_ctx(inst); + + /* Ignore async algorithms if necessary. */ + mask |= crypto_requires_sync(algt->type, algt->mask); + + crypto_set_aead_spawn(spawn, inst); + err = crypto_grab_nivaead(spawn, name, type, mask); + if (err) + goto err_free_inst; + + alg = crypto_aead_spawn_alg(spawn); + + err = -EINVAL; + if (!alg->cra_aead.ivsize) + goto err_drop_alg; + + /* + * This is only true if we're constructing an algorithm with its + * default IV generator. For the default generator we elide the + * template name and double-check the IV generator. + */ + if (algt->mask & CRYPTO_ALG_GENIV) { + if (strcmp(tmpl->name, alg->cra_aead.geniv)) + goto err_drop_alg; + + memcpy(inst->alg.cra_name, alg->cra_name, CRYPTO_MAX_ALG_NAME); + memcpy(inst->alg.cra_driver_name, alg->cra_driver_name, + CRYPTO_MAX_ALG_NAME); + } else { + err = -ENAMETOOLONG; + if (snprintf(inst->alg.cra_name, CRYPTO_MAX_ALG_NAME, + "%s(%s)", tmpl->name, alg->cra_name) >= + CRYPTO_MAX_ALG_NAME) + goto err_drop_alg; + if (snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME, + "%s(%s)", tmpl->name, alg->cra_driver_name) >= + CRYPTO_MAX_ALG_NAME) + goto err_drop_alg; + } + + inst->alg.cra_flags = CRYPTO_ALG_TYPE_AEAD | CRYPTO_ALG_GENIV; + inst->alg.cra_flags |= alg->cra_flags & CRYPTO_ALG_ASYNC; + inst->alg.cra_priority = alg->cra_priority; + inst->alg.cra_blocksize = alg->cra_blocksize; + inst->alg.cra_alignmask = alg->cra_alignmask; + inst->alg.cra_type = &crypto_aead_type; + + inst->alg.cra_aead.ivsize = alg->cra_aead.ivsize; + inst->alg.cra_aead.maxauthsize = alg->cra_aead.maxauthsize; + inst->alg.cra_aead.geniv = alg->cra_aead.geniv; + + inst->alg.cra_aead.setkey = alg->cra_aead.setkey; + inst->alg.cra_aead.setauthsize = alg->cra_aead.setauthsize; + inst->alg.cra_aead.encrypt = alg->cra_aead.encrypt; + inst->alg.cra_aead.decrypt = alg->cra_aead.decrypt; + +out: + return inst; + +err_drop_alg: + crypto_drop_aead(spawn); +err_free_inst: + kfree(inst); + inst = ERR_PTR(err); + goto out; +} +EXPORT_SYMBOL_GPL(aead_geniv_alloc); + +void aead_geniv_free(struct crypto_instance *inst) +{ + crypto_drop_aead(crypto_instance_ctx(inst)); + kfree(inst); +} +EXPORT_SYMBOL_GPL(aead_geniv_free); + +int aead_geniv_init(struct crypto_tfm *tfm) +{ + struct crypto_instance *inst = (void *)tfm->__crt_alg; + struct crypto_aead *aead; + + aead = crypto_spawn_aead(crypto_instance_ctx(inst)); + if (IS_ERR(aead)) + return PTR_ERR(aead); + + tfm->crt_aead.base = aead; + tfm->crt_aead.reqsize += crypto_aead_reqsize(aead); + + return 0; +} +EXPORT_SYMBOL_GPL(aead_geniv_init); + +void aead_geniv_exit(struct crypto_tfm *tfm) +{ + crypto_free_aead(tfm->crt_aead.base); +} +EXPORT_SYMBOL_GPL(aead_geniv_exit); + MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Authenticated Encryption with Associated Data (AEAD)"); diff --git a/include/crypto/internal/aead.h b/include/crypto/internal/aead.h new file mode 100644 index 000000000000..eb4eee7a7804 --- /dev/null +++ b/include/crypto/internal/aead.h @@ -0,0 +1,77 @@ +/* + * AEAD: Authenticated Encryption with Associated Data + * + * Copyright (c) 2007 Herbert Xu + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ + +#ifndef _CRYPTO_INTERNAL_AEAD_H +#define _CRYPTO_INTERNAL_AEAD_H + +#include +#include +#include + +struct rtattr; + +struct crypto_aead_spawn { + struct crypto_spawn base; +}; + +extern const struct crypto_type crypto_nivaead_type; + +static inline void crypto_set_aead_spawn( + struct crypto_aead_spawn *spawn, struct crypto_instance *inst) +{ + crypto_set_spawn(&spawn->base, inst); +} + +static inline void crypto_drop_aead(struct crypto_aead_spawn *spawn) +{ + crypto_drop_spawn(&spawn->base); +} + +static inline struct crypto_alg *crypto_aead_spawn_alg( + struct crypto_aead_spawn *spawn) +{ + return spawn->base.alg; +} + +static inline struct crypto_aead *crypto_spawn_aead( + struct crypto_aead_spawn *spawn) +{ + return __crypto_aead_cast( + crypto_spawn_tfm(&spawn->base, CRYPTO_ALG_TYPE_AEAD, + CRYPTO_ALG_TYPE_MASK)); +} + +struct crypto_instance *aead_geniv_alloc(struct crypto_template *tmpl, + struct rtattr **tb, u32 type, + u32 mask); +void aead_geniv_free(struct crypto_instance *inst); +int aead_geniv_init(struct crypto_tfm *tfm); +void aead_geniv_exit(struct crypto_tfm *tfm); + +static inline struct crypto_aead *aead_geniv_base(struct crypto_aead *geniv) +{ + return crypto_aead_crt(geniv)->base; +} + +static inline void *aead_givcrypt_reqctx(struct aead_givcrypt_request *req) +{ + return aead_request_ctx(&req->areq); +} + +static inline void aead_givcrypt_complete(struct aead_givcrypt_request *req, + int err) +{ + aead_request_complete(&req->areq, err); +} + +#endif /* _CRYPTO_INTERNAL_AEAD_H */ + diff --git a/include/linux/crypto.h b/include/linux/crypto.h index 7524928bff93..639385a9672d 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -206,6 +206,8 @@ struct aead_alg { int (*givencrypt)(struct aead_givcrypt_request *req); int (*givdecrypt)(struct aead_givcrypt_request *req); + const char *geniv; + unsigned int ivsize; unsigned int maxauthsize; }; @@ -353,6 +355,9 @@ struct aead_tfm { int (*decrypt)(struct aead_request *req); int (*givencrypt)(struct aead_givcrypt_request *req); int (*givdecrypt)(struct aead_givcrypt_request *req); + + struct crypto_aead *base; + unsigned int ivsize; unsigned int authsize; unsigned int reqsize; @@ -781,7 +786,9 @@ static inline void crypto_aead_clear_flags(struct crypto_aead *tfm, u32 flags) static inline int crypto_aead_setkey(struct crypto_aead *tfm, const u8 *key, unsigned int keylen) { - return crypto_aead_crt(tfm)->setkey(tfm, key, keylen); + struct aead_tfm *crt = crypto_aead_crt(tfm); + + return crt->setkey(crt->base, key, keylen); } int crypto_aead_setauthsize(struct crypto_aead *tfm, unsigned int authsize); @@ -809,7 +816,7 @@ static inline unsigned int crypto_aead_reqsize(struct crypto_aead *tfm) static inline void aead_request_set_tfm(struct aead_request *req, struct crypto_aead *tfm) { - req->base.tfm = crypto_aead_tfm(tfm); + req->base.tfm = crypto_aead_tfm(crypto_aead_crt(tfm)->base); } static inline struct aead_request *aead_request_alloc(struct crypto_aead *tfm, -- cgit v1.2.3-59-g8ed1b From 14df4d80433b8413f901e80880c39e8759b8418f Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Wed, 12 Dec 2007 12:27:26 +0800 Subject: [CRYPTO] seqiv: Add AEAD support This patch adds support for using seqiv with AEAD algorithms. This is useful for those AEAD algorithms that performs authentication before encryption because the IV generated by the underlying encryption algorithm won't be available for authentication. Signed-off-by: Herbert Xu --- crypto/seqiv.c | 191 ++++++++++++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 175 insertions(+), 16 deletions(-) diff --git a/crypto/seqiv.c b/crypto/seqiv.c index 9c2d80d77a0a..b903aab31577 100644 --- a/crypto/seqiv.c +++ b/crypto/seqiv.c @@ -13,6 +13,7 @@ * */ +#include #include #include #include @@ -53,6 +54,46 @@ static void seqiv_complete(struct crypto_async_request *base, int err) skcipher_givcrypt_complete(req, err); } +static void seqiv_aead_complete2(struct aead_givcrypt_request *req, int err) +{ + struct aead_request *subreq = aead_givcrypt_reqctx(req); + struct crypto_aead *geniv; + + if (err == -EINPROGRESS) + return; + + if (err) + goto out; + + geniv = aead_givcrypt_reqtfm(req); + memcpy(req->areq.iv, subreq->iv, crypto_aead_ivsize(geniv)); + +out: + kfree(subreq->iv); +} + +static void seqiv_aead_complete(struct crypto_async_request *base, int err) +{ + struct aead_givcrypt_request *req = base->data; + + seqiv_aead_complete2(req, err); + aead_givcrypt_complete(req, err); +} + +static void seqiv_geniv(struct seqiv_ctx *ctx, u8 *info, u64 seq, + unsigned int ivsize) +{ + unsigned int len = ivsize; + + if (ivsize > sizeof(u64)) { + memset(info, 0, ivsize - sizeof(u64)); + len = sizeof(u64); + } + seq = cpu_to_be64(seq); + memcpy(info + ivsize - len, &seq, len); + crypto_xor(info, ctx->salt, ivsize); +} + static int seqiv_givencrypt(struct skcipher_givcrypt_request *req) { struct crypto_ablkcipher *geniv = skcipher_givcrypt_reqtfm(req); @@ -61,9 +102,7 @@ static int seqiv_givencrypt(struct skcipher_givcrypt_request *req) crypto_completion_t complete; void *data; u8 *info; - __be64 seq; unsigned int ivsize; - unsigned int len; int err; ablkcipher_request_set_tfm(subreq, skcipher_geniv_cipher(geniv)); @@ -91,15 +130,7 @@ static int seqiv_givencrypt(struct skcipher_givcrypt_request *req) ablkcipher_request_set_crypt(subreq, req->creq.src, req->creq.dst, req->creq.nbytes, info); - len = ivsize; - if (ivsize > sizeof(u64)) { - memset(info, 0, ivsize - sizeof(u64)); - len = sizeof(u64); - } - seq = cpu_to_be64(req->seq); - memcpy(info + ivsize - len, &seq, len); - crypto_xor(info, ctx->salt, ivsize); - + seqiv_geniv(ctx, info, req->seq, ivsize); memcpy(req->giv, info, ivsize); err = crypto_ablkcipher_encrypt(subreq); @@ -108,6 +139,52 @@ static int seqiv_givencrypt(struct skcipher_givcrypt_request *req) return err; } +static int seqiv_aead_givencrypt(struct aead_givcrypt_request *req) +{ + struct crypto_aead *geniv = aead_givcrypt_reqtfm(req); + struct seqiv_ctx *ctx = crypto_aead_ctx(geniv); + struct aead_request *areq = &req->areq; + struct aead_request *subreq = aead_givcrypt_reqctx(req); + crypto_completion_t complete; + void *data; + u8 *info; + unsigned int ivsize; + int err; + + aead_request_set_tfm(subreq, aead_geniv_base(geniv)); + + complete = areq->base.complete; + data = areq->base.data; + info = areq->iv; + + ivsize = crypto_aead_ivsize(geniv); + + if (unlikely(!IS_ALIGNED((unsigned long)info, + crypto_aead_alignmask(geniv) + 1))) { + info = kmalloc(ivsize, areq->base.flags & + CRYPTO_TFM_REQ_MAY_SLEEP ? GFP_KERNEL: + GFP_ATOMIC); + if (!info) + return -ENOMEM; + + complete = seqiv_aead_complete; + data = req; + } + + aead_request_set_callback(subreq, areq->base.flags, complete, data); + aead_request_set_crypt(subreq, areq->src, areq->dst, areq->cryptlen, + info); + aead_request_set_assoc(subreq, areq->assoc, areq->assoclen); + + seqiv_geniv(ctx, info, req->seq, ivsize); + memcpy(req->giv, info, ivsize); + + err = crypto_aead_encrypt(subreq); + if (unlikely(info != areq->iv)) + seqiv_aead_complete2(req, err); + return err; +} + static int seqiv_givencrypt_first(struct skcipher_givcrypt_request *req) { struct crypto_ablkcipher *geniv = skcipher_givcrypt_reqtfm(req); @@ -126,6 +203,24 @@ unlock: return seqiv_givencrypt(req); } +static int seqiv_aead_givencrypt_first(struct aead_givcrypt_request *req) +{ + struct crypto_aead *geniv = aead_givcrypt_reqtfm(req); + struct seqiv_ctx *ctx = crypto_aead_ctx(geniv); + + spin_lock_bh(&ctx->lock); + if (crypto_aead_crt(geniv)->givencrypt != seqiv_aead_givencrypt_first) + goto unlock; + + crypto_aead_crt(geniv)->givencrypt = seqiv_aead_givencrypt; + get_random_bytes(ctx->salt, crypto_aead_ivsize(geniv)); + +unlock: + spin_unlock_bh(&ctx->lock); + + return seqiv_aead_givencrypt(req); +} + static int seqiv_init(struct crypto_tfm *tfm) { struct crypto_ablkcipher *geniv = __crypto_ablkcipher_cast(tfm); @@ -138,13 +233,26 @@ static int seqiv_init(struct crypto_tfm *tfm) return skcipher_geniv_init(tfm); } +static int seqiv_aead_init(struct crypto_tfm *tfm) +{ + struct crypto_aead *geniv = __crypto_aead_cast(tfm); + struct seqiv_ctx *ctx = crypto_aead_ctx(geniv); + + spin_lock_init(&ctx->lock); + + tfm->crt_aead.reqsize = sizeof(struct aead_request); + + return aead_geniv_init(tfm); +} + static struct crypto_template seqiv_tmpl; -static struct crypto_instance *seqiv_alloc(struct rtattr **tb) +static struct crypto_instance *seqiv_ablkcipher_alloc(struct rtattr **tb) { struct crypto_instance *inst; inst = skcipher_geniv_alloc(&seqiv_tmpl, tb, 0, 0); + if (IS_ERR(inst)) goto out; @@ -153,19 +261,70 @@ static struct crypto_instance *seqiv_alloc(struct rtattr **tb) inst->alg.cra_init = seqiv_init; inst->alg.cra_exit = skcipher_geniv_exit; - inst->alg.cra_alignmask |= __alignof__(u32) - 1; - - inst->alg.cra_ctxsize = sizeof(struct seqiv_ctx); inst->alg.cra_ctxsize += inst->alg.cra_ablkcipher.ivsize; out: return inst; } +static struct crypto_instance *seqiv_aead_alloc(struct rtattr **tb) +{ + struct crypto_instance *inst; + + inst = aead_geniv_alloc(&seqiv_tmpl, tb, 0, 0); + + if (IS_ERR(inst)) + goto out; + + inst->alg.cra_aead.givencrypt = seqiv_aead_givencrypt_first; + + inst->alg.cra_init = seqiv_aead_init; + inst->alg.cra_exit = aead_geniv_exit; + + inst->alg.cra_ctxsize = inst->alg.cra_aead.ivsize; + +out: + return inst; +} + +static struct crypto_instance *seqiv_alloc(struct rtattr **tb) +{ + struct crypto_attr_type *algt; + struct crypto_instance *inst; + int err; + + algt = crypto_get_attr_type(tb); + err = PTR_ERR(algt); + if (IS_ERR(algt)) + return ERR_PTR(err); + + if ((algt->type ^ CRYPTO_ALG_TYPE_AEAD) & CRYPTO_ALG_TYPE_MASK) + inst = seqiv_ablkcipher_alloc(tb); + else + inst = seqiv_aead_alloc(tb); + + if (IS_ERR(inst)) + goto out; + + inst->alg.cra_alignmask |= __alignof__(u32) - 1; + inst->alg.cra_ctxsize += sizeof(struct seqiv_ctx); + +out: + return inst; +} + +static void seqiv_free(struct crypto_instance *inst) +{ + if ((inst->alg.cra_flags ^ CRYPTO_ALG_TYPE_AEAD) & CRYPTO_ALG_TYPE_MASK) + skcipher_geniv_free(inst); + else + aead_geniv_free(inst); +} + static struct crypto_template seqiv_tmpl = { .name = "seqiv", .alloc = seqiv_alloc, - .free = skcipher_geniv_free, + .free = seqiv_free, .module = THIS_MODULE, }; -- cgit v1.2.3-59-g8ed1b From d29ce988aeb459203c74f14747f4f77e1829ef78 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Wed, 12 Dec 2007 19:24:27 +0800 Subject: [CRYPTO] aead: Create default givcipher instances This patch makes crypto_alloc_aead always return algorithms that is capable of generating their own IVs through givencrypt and givdecrypt. All existing AEAD algorithms already do. New ones must either supply their own or specify a generic IV generator with the geniv field. Signed-off-by: Herbert Xu --- crypto/aead.c | 153 +++++++++++++++++++++++++++++++++++++++++ include/crypto/internal/aead.h | 3 + include/linux/crypto.h | 10 +-- 3 files changed, 157 insertions(+), 9 deletions(-) diff --git a/crypto/aead.c b/crypto/aead.c index 9f7aca891926..f5b1add31976 100644 --- a/crypto/aead.c +++ b/crypto/aead.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -328,5 +329,157 @@ void aead_geniv_exit(struct crypto_tfm *tfm) } EXPORT_SYMBOL_GPL(aead_geniv_exit); +static int crypto_nivaead_default(struct crypto_alg *alg, u32 type, u32 mask) +{ + struct rtattr *tb[3]; + struct { + struct rtattr attr; + struct crypto_attr_type data; + } ptype; + struct { + struct rtattr attr; + struct crypto_attr_alg data; + } palg; + struct crypto_template *tmpl; + struct crypto_instance *inst; + struct crypto_alg *larval; + const char *geniv; + int err; + + larval = crypto_larval_lookup(alg->cra_driver_name, + CRYPTO_ALG_TYPE_AEAD | CRYPTO_ALG_GENIV, + CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_GENIV); + err = PTR_ERR(larval); + if (IS_ERR(larval)) + goto out; + + err = -EAGAIN; + if (!crypto_is_larval(larval)) + goto drop_larval; + + ptype.attr.rta_len = sizeof(ptype); + ptype.attr.rta_type = CRYPTOA_TYPE; + ptype.data.type = type | CRYPTO_ALG_GENIV; + /* GENIV tells the template that we're making a default geniv. */ + ptype.data.mask = mask | CRYPTO_ALG_GENIV; + tb[0] = &ptype.attr; + + palg.attr.rta_len = sizeof(palg); + palg.attr.rta_type = CRYPTOA_ALG; + /* Must use the exact name to locate ourselves. */ + memcpy(palg.data.name, alg->cra_driver_name, CRYPTO_MAX_ALG_NAME); + tb[1] = &palg.attr; + + tb[2] = NULL; + + geniv = alg->cra_aead.geniv; + + tmpl = crypto_lookup_template(geniv); + err = -ENOENT; + if (!tmpl) + goto kill_larval; + + inst = tmpl->alloc(tb); + err = PTR_ERR(inst); + if (IS_ERR(inst)) + goto put_tmpl; + + if ((err = crypto_register_instance(tmpl, inst))) { + tmpl->free(inst); + goto put_tmpl; + } + + /* Redo the lookup to use the instance we just registered. */ + err = -EAGAIN; + +put_tmpl: + crypto_tmpl_put(tmpl); +kill_larval: + crypto_larval_kill(larval); +drop_larval: + crypto_mod_put(larval); +out: + crypto_mod_put(alg); + return err; +} + +static struct crypto_alg *crypto_lookup_aead(const char *name, u32 type, + u32 mask) +{ + struct crypto_alg *alg; + + alg = crypto_alg_mod_lookup(name, type, mask); + if (IS_ERR(alg)) + return alg; + + if (alg->cra_type == &crypto_aead_type) + return alg; + + if (!alg->cra_aead.ivsize) + return alg; + + return ERR_PTR(crypto_nivaead_default(alg, type, mask)); +} + +int crypto_grab_aead(struct crypto_aead_spawn *spawn, const char *name, + u32 type, u32 mask) +{ + struct crypto_alg *alg; + int err; + + type &= ~(CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_GENIV); + type |= CRYPTO_ALG_TYPE_AEAD; + mask &= ~(CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_GENIV); + mask |= CRYPTO_ALG_TYPE_MASK; + + alg = crypto_lookup_aead(name, type, mask); + if (IS_ERR(alg)) + return PTR_ERR(alg); + + err = crypto_init_spawn(&spawn->base, alg, spawn->base.inst, mask); + crypto_mod_put(alg); + return err; +} +EXPORT_SYMBOL_GPL(crypto_grab_aead); + +struct crypto_aead *crypto_alloc_aead(const char *alg_name, u32 type, u32 mask) +{ + struct crypto_tfm *tfm; + int err; + + type &= ~(CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_GENIV); + type |= CRYPTO_ALG_TYPE_AEAD; + mask &= ~(CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_GENIV); + mask |= CRYPTO_ALG_TYPE_MASK; + + for (;;) { + struct crypto_alg *alg; + + alg = crypto_lookup_aead(alg_name, type, mask); + if (IS_ERR(alg)) { + err = PTR_ERR(alg); + goto err; + } + + tfm = __crypto_alloc_tfm(alg, type, mask); + if (!IS_ERR(tfm)) + return __crypto_aead_cast(tfm); + + crypto_mod_put(alg); + err = PTR_ERR(tfm); + +err: + if (err != -EAGAIN) + break; + if (signal_pending(current)) { + err = -EINTR; + break; + } + } + + return ERR_PTR(err); +} +EXPORT_SYMBOL_GPL(crypto_alloc_aead); + MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Authenticated Encryption with Associated Data (AEAD)"); diff --git a/include/crypto/internal/aead.h b/include/crypto/internal/aead.h index eb4eee7a7804..d838c945575a 100644 --- a/include/crypto/internal/aead.h +++ b/include/crypto/internal/aead.h @@ -31,6 +31,9 @@ static inline void crypto_set_aead_spawn( crypto_set_spawn(&spawn->base, inst); } +int crypto_grab_aead(struct crypto_aead_spawn *spawn, const char *name, + u32 type, u32 mask); + static inline void crypto_drop_aead(struct crypto_aead_spawn *spawn) { crypto_drop_spawn(&spawn->base); diff --git a/include/linux/crypto.h b/include/linux/crypto.h index 639385a9672d..0aba10460201 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -723,15 +723,7 @@ static inline struct crypto_aead *__crypto_aead_cast(struct crypto_tfm *tfm) return (struct crypto_aead *)tfm; } -static inline struct crypto_aead *crypto_alloc_aead(const char *alg_name, - u32 type, u32 mask) -{ - type &= ~CRYPTO_ALG_TYPE_MASK; - type |= CRYPTO_ALG_TYPE_AEAD; - mask |= CRYPTO_ALG_TYPE_MASK; - - return __crypto_aead_cast(crypto_alloc_base(alg_name, type, mask)); -} +struct crypto_aead *crypto_alloc_aead(const char *alg_name, u32 type, u32 mask); static inline struct crypto_tfm *crypto_aead_tfm(struct crypto_aead *tfm) { -- cgit v1.2.3-59-g8ed1b From 4a49b499dfa0c9e42be6d6fdd771f3434c776278 Mon Sep 17 00:00:00 2001 From: Joy Latten Date: Wed, 12 Dec 2007 20:25:13 +0800 Subject: [CRYPTO] ccm: Added CCM mode This patch adds Counter with CBC-MAC (CCM) support. RFC 3610 and NIST Special Publication 800-38C were referenced. Signed-off-by: Joy Latten Signed-off-by: Herbert Xu --- crypto/Kconfig | 7 + crypto/Makefile | 1 + crypto/ccm.c | 889 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 897 insertions(+) create mode 100644 crypto/ccm.c diff --git a/crypto/Kconfig b/crypto/Kconfig index 7ad9711eec98..0d89f77428e5 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -220,6 +220,13 @@ config CRYPTO_GCM Support for Galois/Counter Mode (GCM) and Galois Message Authentication Code (GMAC). Required for IPSec. +config CRYPTO_CCM + tristate "CCM support" + select CRYPTO_CTR + select CRYPTO_AEAD + help + Support for Counter with CBC MAC. Required for IPsec. + config CRYPTO_CRYPTD tristate "Software async crypto daemon" select CRYPTO_BLKCIPHER diff --git a/crypto/Makefile b/crypto/Makefile index 1b99b3a1310c..48c758379954 100644 --- a/crypto/Makefile +++ b/crypto/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_CRYPTO_LRW) += lrw.o obj-$(CONFIG_CRYPTO_XTS) += xts.o obj-$(CONFIG_CRYPTO_CTR) += ctr.o obj-$(CONFIG_CRYPTO_GCM) += gcm.o +obj-$(CONFIG_CRYPTO_CCM) += ccm.o obj-$(CONFIG_CRYPTO_CRYPTD) += cryptd.o obj-$(CONFIG_CRYPTO_DES) += des_generic.o obj-$(CONFIG_CRYPTO_FCRYPT) += fcrypt.o diff --git a/crypto/ccm.c b/crypto/ccm.c new file mode 100644 index 000000000000..7cf7e5a6b781 --- /dev/null +++ b/crypto/ccm.c @@ -0,0 +1,889 @@ +/* + * CCM: Counter with CBC-MAC + * + * (C) Copyright IBM Corp. 2007 - Joy Latten + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "internal.h" + +struct ccm_instance_ctx { + struct crypto_skcipher_spawn ctr; + struct crypto_spawn cipher; +}; + +struct crypto_ccm_ctx { + struct crypto_cipher *cipher; + struct crypto_ablkcipher *ctr; +}; + +struct crypto_rfc4309_ctx { + struct crypto_aead *child; + u8 nonce[3]; +}; + +struct crypto_ccm_req_priv_ctx { + u8 odata[16]; + u8 idata[16]; + u8 auth_tag[16]; + u32 ilen; + u32 flags; + struct scatterlist src[2]; + struct scatterlist dst[2]; + struct ablkcipher_request abreq; +}; + +static inline struct crypto_ccm_req_priv_ctx *crypto_ccm_reqctx( + struct aead_request *req) +{ + unsigned long align = crypto_aead_alignmask(crypto_aead_reqtfm(req)); + + return (void *)PTR_ALIGN((u8 *)aead_request_ctx(req), align + 1); +} + +static int set_msg_len(u8 *block, unsigned int msglen, int csize) +{ + __be32 data; + + memset(block, 0, csize); + block += csize; + + if (csize >= 4) + csize = 4; + else if (msglen > (1 << (8 * csize))) + return -EOVERFLOW; + + data = cpu_to_be32(msglen); + memcpy(block - csize, (u8 *)&data + 4 - csize, csize); + + return 0; +} + +static int crypto_ccm_setkey(struct crypto_aead *aead, const u8 *key, + unsigned int keylen) +{ + struct crypto_ccm_ctx *ctx = crypto_aead_ctx(aead); + struct crypto_ablkcipher *ctr = ctx->ctr; + struct crypto_cipher *tfm = ctx->cipher; + int err = 0; + + crypto_ablkcipher_clear_flags(ctr, CRYPTO_TFM_REQ_MASK); + crypto_ablkcipher_set_flags(ctr, crypto_aead_get_flags(aead) & + CRYPTO_TFM_REQ_MASK); + err = crypto_ablkcipher_setkey(ctr, key, keylen); + crypto_aead_set_flags(aead, crypto_ablkcipher_get_flags(ctr) & + CRYPTO_TFM_RES_MASK); + if (err) + goto out; + + crypto_cipher_clear_flags(tfm, CRYPTO_TFM_REQ_MASK); + crypto_cipher_set_flags(tfm, crypto_aead_get_flags(aead) & + CRYPTO_TFM_REQ_MASK); + err = crypto_cipher_setkey(tfm, key, keylen); + crypto_aead_set_flags(aead, crypto_cipher_get_flags(tfm) & + CRYPTO_TFM_RES_MASK); + +out: + return err; +} + +static int crypto_ccm_setauthsize(struct crypto_aead *tfm, + unsigned int authsize) +{ + switch (authsize) { + case 4: + case 6: + case 8: + case 10: + case 12: + case 14: + case 16: + break; + default: + return -EINVAL; + } + + return 0; +} + +static int format_input(u8 *info, struct aead_request *req, + unsigned int cryptlen) +{ + struct crypto_aead *aead = crypto_aead_reqtfm(req); + unsigned int lp = req->iv[0]; + unsigned int l = lp + 1; + unsigned int m; + + m = crypto_aead_authsize(aead); + + memcpy(info, req->iv, 16); + + /* format control info per RFC 3610 and + * NIST Special Publication 800-38C + */ + *info |= (8 * ((m - 2) / 2)); + if (req->assoclen) + *info |= 64; + + return set_msg_len(info + 16 - l, cryptlen, l); +} + +static int format_adata(u8 *adata, unsigned int a) +{ + int len = 0; + + /* add control info for associated data + * RFC 3610 and NIST Special Publication 800-38C + */ + if (a < 65280) { + *(__be16 *)adata = cpu_to_be16(a); + len = 2; + } else { + *(__be16 *)adata = cpu_to_be16(0xfffe); + *(__be32 *)&adata[2] = cpu_to_be32(a); + len = 6; + } + + return len; +} + +static void compute_mac(struct crypto_cipher *tfm, u8 *data, int n, + struct crypto_ccm_req_priv_ctx *pctx) +{ + unsigned int bs = 16; + u8 *odata = pctx->odata; + u8 *idata = pctx->idata; + int datalen, getlen; + + datalen = n; + + /* first time in here, block may be partially filled. */ + getlen = bs - pctx->ilen; + if (datalen >= getlen) { + memcpy(idata + pctx->ilen, data, getlen); + crypto_xor(odata, idata, bs); + crypto_cipher_encrypt_one(tfm, odata, odata); + datalen -= getlen; + data += getlen; + pctx->ilen = 0; + } + + /* now encrypt rest of data */ + while (datalen >= bs) { + crypto_xor(odata, data, bs); + crypto_cipher_encrypt_one(tfm, odata, odata); + + datalen -= bs; + data += bs; + } + + /* check and see if there's leftover data that wasn't + * enough to fill a block. + */ + if (datalen) { + memcpy(idata + pctx->ilen, data, datalen); + pctx->ilen += datalen; + } +} + +static void get_data_to_compute(struct crypto_cipher *tfm, + struct crypto_ccm_req_priv_ctx *pctx, + struct scatterlist *sg, unsigned int len) +{ + struct scatter_walk walk; + u8 *data_src; + int n; + + scatterwalk_start(&walk, sg); + + while (len) { + n = scatterwalk_clamp(&walk, len); + if (!n) { + scatterwalk_start(&walk, sg_next(walk.sg)); + n = scatterwalk_clamp(&walk, len); + } + data_src = scatterwalk_map(&walk, 0); + + compute_mac(tfm, data_src, n, pctx); + len -= n; + + scatterwalk_unmap(data_src, 0); + scatterwalk_advance(&walk, n); + scatterwalk_done(&walk, 0, len); + if (len) + crypto_yield(pctx->flags); + } + + /* any leftover needs padding and then encrypted */ + if (pctx->ilen) { + int padlen; + u8 *odata = pctx->odata; + u8 *idata = pctx->idata; + + padlen = 16 - pctx->ilen; + memset(idata + pctx->ilen, 0, padlen); + crypto_xor(odata, idata, 16); + crypto_cipher_encrypt_one(tfm, odata, odata); + pctx->ilen = 0; + } +} + +static int crypto_ccm_auth(struct aead_request *req, struct scatterlist *plain, + unsigned int cryptlen) +{ + struct crypto_aead *aead = crypto_aead_reqtfm(req); + struct crypto_ccm_ctx *ctx = crypto_aead_ctx(aead); + struct crypto_ccm_req_priv_ctx *pctx = crypto_ccm_reqctx(req); + struct crypto_cipher *cipher = ctx->cipher; + unsigned int assoclen = req->assoclen; + u8 *odata = pctx->odata; + u8 *idata = pctx->idata; + int err; + + /* format control data for input */ + err = format_input(odata, req, cryptlen); + if (err) + goto out; + + /* encrypt first block to use as start in computing mac */ + crypto_cipher_encrypt_one(cipher, odata, odata); + + /* format associated data and compute into mac */ + if (assoclen) { + pctx->ilen = format_adata(idata, assoclen); + get_data_to_compute(cipher, pctx, req->assoc, req->assoclen); + } + + /* compute plaintext into mac */ + get_data_to_compute(cipher, pctx, plain, cryptlen); + +out: + return err; +} + +static void crypto_ccm_encrypt_done(struct crypto_async_request *areq, int err) +{ + struct aead_request *req = areq->data; + struct crypto_aead *aead = crypto_aead_reqtfm(req); + struct crypto_ccm_req_priv_ctx *pctx = crypto_ccm_reqctx(req); + u8 *odata = pctx->odata; + + if (!err) + scatterwalk_map_and_copy(odata, req->dst, req->cryptlen, + crypto_aead_authsize(aead), 1); + aead_request_complete(req, err); +} + +static inline int crypto_ccm_check_iv(const u8 *iv) +{ + /* 2 <= L <= 8, so 1 <= L' <= 7. */ + if (1 > iv[0] || iv[0] > 7) + return -EINVAL; + + return 0; +} + +static int crypto_ccm_encrypt(struct aead_request *req) +{ + struct crypto_aead *aead = crypto_aead_reqtfm(req); + struct crypto_ccm_ctx *ctx = crypto_aead_ctx(aead); + struct crypto_ccm_req_priv_ctx *pctx = crypto_ccm_reqctx(req); + struct ablkcipher_request *abreq = &pctx->abreq; + struct scatterlist *dst; + unsigned int cryptlen = req->cryptlen; + u8 *odata = pctx->odata; + u8 *iv = req->iv; + int err; + + err = crypto_ccm_check_iv(iv); + if (err) + return err; + + pctx->flags = aead_request_flags(req); + + err = crypto_ccm_auth(req, req->src, cryptlen); + if (err) + return err; + + /* Note: rfc 3610 and NIST 800-38C require counter of + * zero to encrypt auth tag. + */ + memset(iv + 15 - iv[0], 0, iv[0] + 1); + + sg_init_table(pctx->src, 2); + sg_set_buf(pctx->src, odata, 16); + scatterwalk_sg_chain(pctx->src, 2, req->src); + + dst = pctx->src; + if (req->src != req->dst) { + sg_init_table(pctx->dst, 2); + sg_set_buf(pctx->dst, odata, 16); + scatterwalk_sg_chain(pctx->dst, 2, req->dst); + dst = pctx->dst; + } + + ablkcipher_request_set_tfm(abreq, ctx->ctr); + ablkcipher_request_set_callback(abreq, pctx->flags, + crypto_ccm_encrypt_done, req); + ablkcipher_request_set_crypt(abreq, pctx->src, dst, cryptlen + 16, iv); + err = crypto_ablkcipher_encrypt(abreq); + if (err) + return err; + + /* copy authtag to end of dst */ + scatterwalk_map_and_copy(odata, req->dst, cryptlen, + crypto_aead_authsize(aead), 1); + return err; +} + +static void crypto_ccm_decrypt_done(struct crypto_async_request *areq, + int err) +{ + struct aead_request *req = areq->data; + struct crypto_ccm_req_priv_ctx *pctx = crypto_ccm_reqctx(req); + struct crypto_aead *aead = crypto_aead_reqtfm(req); + unsigned int authsize = crypto_aead_authsize(aead); + unsigned int cryptlen = req->cryptlen - authsize; + + if (!err) { + err = crypto_ccm_auth(req, req->dst, cryptlen); + if (!err && memcmp(pctx->auth_tag, pctx->odata, authsize)) + err = -EBADMSG; + } + aead_request_complete(req, err); +} + +static int crypto_ccm_decrypt(struct aead_request *req) +{ + struct crypto_aead *aead = crypto_aead_reqtfm(req); + struct crypto_ccm_ctx *ctx = crypto_aead_ctx(aead); + struct crypto_ccm_req_priv_ctx *pctx = crypto_ccm_reqctx(req); + struct ablkcipher_request *abreq = &pctx->abreq; + struct scatterlist *dst; + unsigned int authsize = crypto_aead_authsize(aead); + unsigned int cryptlen = req->cryptlen; + u8 *authtag = pctx->auth_tag; + u8 *odata = pctx->odata; + u8 *iv = req->iv; + int err; + + if (cryptlen < authsize) + return -EINVAL; + cryptlen -= authsize; + + err = crypto_ccm_check_iv(iv); + if (err) + return err; + + pctx->flags = aead_request_flags(req); + + scatterwalk_map_and_copy(authtag, req->src, cryptlen, authsize, 0); + + memset(iv + 15 - iv[0], 0, iv[0] + 1); + + sg_init_table(pctx->src, 2); + sg_set_buf(pctx->src, authtag, 16); + scatterwalk_sg_chain(pctx->src, 2, req->src); + + dst = pctx->src; + if (req->src != req->dst) { + sg_init_table(pctx->dst, 2); + sg_set_buf(pctx->dst, authtag, 16); + scatterwalk_sg_chain(pctx->dst, 2, req->dst); + dst = pctx->dst; + } + + ablkcipher_request_set_tfm(abreq, ctx->ctr); + ablkcipher_request_set_callback(abreq, pctx->flags, + crypto_ccm_decrypt_done, req); + ablkcipher_request_set_crypt(abreq, pctx->src, dst, cryptlen + 16, iv); + err = crypto_ablkcipher_decrypt(abreq); + if (err) + return err; + + err = crypto_ccm_auth(req, req->dst, cryptlen); + if (err) + return err; + + /* verify */ + if (memcmp(authtag, odata, authsize)) + return -EBADMSG; + + return err; +} + +static int crypto_ccm_init_tfm(struct crypto_tfm *tfm) +{ + struct crypto_instance *inst = (void *)tfm->__crt_alg; + struct ccm_instance_ctx *ictx = crypto_instance_ctx(inst); + struct crypto_ccm_ctx *ctx = crypto_tfm_ctx(tfm); + struct crypto_cipher *cipher; + struct crypto_ablkcipher *ctr; + unsigned long align; + int err; + + cipher = crypto_spawn_cipher(&ictx->cipher); + if (IS_ERR(cipher)) + return PTR_ERR(cipher); + + ctr = crypto_spawn_skcipher(&ictx->ctr); + err = PTR_ERR(ctr); + if (IS_ERR(ctr)) + goto err_free_cipher; + + ctx->cipher = cipher; + ctx->ctr = ctr; + + align = crypto_tfm_alg_alignmask(tfm); + align &= ~(crypto_tfm_ctx_alignment() - 1); + tfm->crt_aead.reqsize = align + + sizeof(struct crypto_ccm_req_priv_ctx) + + crypto_ablkcipher_reqsize(ctr); + + return 0; + +err_free_cipher: + crypto_free_cipher(cipher); + return err; +} + +static void crypto_ccm_exit_tfm(struct crypto_tfm *tfm) +{ + struct crypto_ccm_ctx *ctx = crypto_tfm_ctx(tfm); + + crypto_free_cipher(ctx->cipher); + crypto_free_ablkcipher(ctx->ctr); +} + +static struct crypto_instance *crypto_ccm_alloc_common(struct rtattr **tb, + const char *full_name, + const char *ctr_name, + const char *cipher_name) +{ + struct crypto_attr_type *algt; + struct crypto_instance *inst; + struct crypto_alg *ctr; + struct crypto_alg *cipher; + struct ccm_instance_ctx *ictx; + int err; + + algt = crypto_get_attr_type(tb); + err = PTR_ERR(algt); + if (IS_ERR(algt)) + return ERR_PTR(err); + + if ((algt->type ^ CRYPTO_ALG_TYPE_AEAD) & algt->mask) + return ERR_PTR(-EINVAL); + + cipher = crypto_alg_mod_lookup(cipher_name, CRYPTO_ALG_TYPE_CIPHER, + CRYPTO_ALG_TYPE_MASK); + err = PTR_ERR(cipher); + if (IS_ERR(cipher)) + return ERR_PTR(err); + + err = -EINVAL; + if (cipher->cra_blocksize != 16) + goto out_put_cipher; + + inst = kzalloc(sizeof(*inst) + sizeof(*ictx), GFP_KERNEL); + err = -ENOMEM; + if (!inst) + goto out_put_cipher; + + ictx = crypto_instance_ctx(inst); + + err = crypto_init_spawn(&ictx->cipher, cipher, inst, + CRYPTO_ALG_TYPE_MASK); + if (err) + goto err_free_inst; + + crypto_set_skcipher_spawn(&ictx->ctr, inst); + err = crypto_grab_skcipher(&ictx->ctr, ctr_name, 0, + crypto_requires_sync(algt->type, + algt->mask)); + if (err) + goto err_drop_cipher; + + ctr = crypto_skcipher_spawn_alg(&ictx->ctr); + + /* Not a stream cipher? */ + err = -EINVAL; + if (ctr->cra_blocksize != 1) + goto err_drop_ctr; + + /* We want the real thing! */ + if (ctr->cra_ablkcipher.ivsize != 16) + goto err_drop_ctr; + + err = -ENAMETOOLONG; + if (snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME, + "ccm_base(%s,%s)", ctr->cra_driver_name, + cipher->cra_driver_name) >= CRYPTO_MAX_ALG_NAME) + goto err_drop_ctr; + + memcpy(inst->alg.cra_name, full_name, CRYPTO_MAX_ALG_NAME); + + inst->alg.cra_flags = CRYPTO_ALG_TYPE_AEAD; + inst->alg.cra_flags |= ctr->cra_flags & CRYPTO_ALG_ASYNC; + inst->alg.cra_priority = cipher->cra_priority + ctr->cra_priority; + inst->alg.cra_blocksize = 1; + inst->alg.cra_alignmask = cipher->cra_alignmask | ctr->cra_alignmask | + (__alignof__(u32) - 1); + inst->alg.cra_type = &crypto_aead_type; + inst->alg.cra_aead.ivsize = 16; + inst->alg.cra_aead.maxauthsize = 16; + inst->alg.cra_ctxsize = sizeof(struct crypto_ccm_ctx); + inst->alg.cra_init = crypto_ccm_init_tfm; + inst->alg.cra_exit = crypto_ccm_exit_tfm; + inst->alg.cra_aead.setkey = crypto_ccm_setkey; + inst->alg.cra_aead.setauthsize = crypto_ccm_setauthsize; + inst->alg.cra_aead.encrypt = crypto_ccm_encrypt; + inst->alg.cra_aead.decrypt = crypto_ccm_decrypt; + +out: + crypto_mod_put(cipher); + return inst; + +err_drop_ctr: + crypto_drop_skcipher(&ictx->ctr); +err_drop_cipher: + crypto_drop_spawn(&ictx->cipher); +err_free_inst: + kfree(inst); +out_put_cipher: + inst = ERR_PTR(err); + goto out; +} + +static struct crypto_instance *crypto_ccm_alloc(struct rtattr **tb) +{ + int err; + const char *cipher_name; + char ctr_name[CRYPTO_MAX_ALG_NAME]; + char full_name[CRYPTO_MAX_ALG_NAME]; + + cipher_name = crypto_attr_alg_name(tb[1]); + err = PTR_ERR(cipher_name); + if (IS_ERR(cipher_name)) + return ERR_PTR(err); + + if (snprintf(ctr_name, CRYPTO_MAX_ALG_NAME, "ctr(%s)", + cipher_name) >= CRYPTO_MAX_ALG_NAME) + return ERR_PTR(-ENAMETOOLONG); + + if (snprintf(full_name, CRYPTO_MAX_ALG_NAME, "ccm(%s)", cipher_name) >= + CRYPTO_MAX_ALG_NAME) + return ERR_PTR(-ENAMETOOLONG); + + return crypto_ccm_alloc_common(tb, full_name, ctr_name, cipher_name); +} + +static void crypto_ccm_free(struct crypto_instance *inst) +{ + struct ccm_instance_ctx *ctx = crypto_instance_ctx(inst); + + crypto_drop_spawn(&ctx->cipher); + crypto_drop_skcipher(&ctx->ctr); + kfree(inst); +} + +static struct crypto_template crypto_ccm_tmpl = { + .name = "ccm", + .alloc = crypto_ccm_alloc, + .free = crypto_ccm_free, + .module = THIS_MODULE, +}; + +static struct crypto_instance *crypto_ccm_base_alloc(struct rtattr **tb) +{ + int err; + const char *ctr_name; + const char *cipher_name; + char full_name[CRYPTO_MAX_ALG_NAME]; + + ctr_name = crypto_attr_alg_name(tb[1]); + err = PTR_ERR(ctr_name); + if (IS_ERR(ctr_name)) + return ERR_PTR(err); + + cipher_name = crypto_attr_alg_name(tb[2]); + err = PTR_ERR(cipher_name); + if (IS_ERR(cipher_name)) + return ERR_PTR(err); + + if (snprintf(full_name, CRYPTO_MAX_ALG_NAME, "ccm_base(%s,%s)", + ctr_name, cipher_name) >= CRYPTO_MAX_ALG_NAME) + return ERR_PTR(-ENAMETOOLONG); + + return crypto_ccm_alloc_common(tb, full_name, ctr_name, cipher_name); +} + +static struct crypto_template crypto_ccm_base_tmpl = { + .name = "ccm_base", + .alloc = crypto_ccm_base_alloc, + .free = crypto_ccm_free, + .module = THIS_MODULE, +}; + +static int crypto_rfc4309_setkey(struct crypto_aead *parent, const u8 *key, + unsigned int keylen) +{ + struct crypto_rfc4309_ctx *ctx = crypto_aead_ctx(parent); + struct crypto_aead *child = ctx->child; + int err; + + if (keylen < 3) + return -EINVAL; + + keylen -= 3; + memcpy(ctx->nonce, key + keylen, 3); + + crypto_aead_clear_flags(child, CRYPTO_TFM_REQ_MASK); + crypto_aead_set_flags(child, crypto_aead_get_flags(parent) & + CRYPTO_TFM_REQ_MASK); + err = crypto_aead_setkey(child, key, keylen); + crypto_aead_set_flags(parent, crypto_aead_get_flags(child) & + CRYPTO_TFM_RES_MASK); + + return err; +} + +static int crypto_rfc4309_setauthsize(struct crypto_aead *parent, + unsigned int authsize) +{ + struct crypto_rfc4309_ctx *ctx = crypto_aead_ctx(parent); + + switch (authsize) { + case 8: + case 12: + case 16: + break; + default: + return -EINVAL; + } + + return crypto_aead_setauthsize(ctx->child, authsize); +} + +static struct aead_request *crypto_rfc4309_crypt(struct aead_request *req) +{ + struct aead_request *subreq = aead_request_ctx(req); + struct crypto_aead *aead = crypto_aead_reqtfm(req); + struct crypto_rfc4309_ctx *ctx = crypto_aead_ctx(aead); + struct crypto_aead *child = ctx->child; + u8 *iv = PTR_ALIGN((u8 *)(subreq + 1) + crypto_aead_reqsize(child), + crypto_aead_alignmask(child) + 1); + + /* L' */ + iv[0] = 3; + + memcpy(iv + 1, ctx->nonce, 3); + memcpy(iv + 4, req->iv, 8); + + aead_request_set_tfm(subreq, child); + aead_request_set_callback(subreq, req->base.flags, req->base.complete, + req->base.data); + aead_request_set_crypt(subreq, req->src, req->dst, req->cryptlen, iv); + aead_request_set_assoc(subreq, req->assoc, req->assoclen); + + return subreq; +} + +static int crypto_rfc4309_encrypt(struct aead_request *req) +{ + req = crypto_rfc4309_crypt(req); + + return crypto_aead_encrypt(req); +} + +static int crypto_rfc4309_decrypt(struct aead_request *req) +{ + req = crypto_rfc4309_crypt(req); + + return crypto_aead_decrypt(req); +} + +static int crypto_rfc4309_init_tfm(struct crypto_tfm *tfm) +{ + struct crypto_instance *inst = (void *)tfm->__crt_alg; + struct crypto_aead_spawn *spawn = crypto_instance_ctx(inst); + struct crypto_rfc4309_ctx *ctx = crypto_tfm_ctx(tfm); + struct crypto_aead *aead; + unsigned long align; + + aead = crypto_spawn_aead(spawn); + if (IS_ERR(aead)) + return PTR_ERR(aead); + + ctx->child = aead; + + align = crypto_aead_alignmask(aead); + align &= ~(crypto_tfm_ctx_alignment() - 1); + tfm->crt_aead.reqsize = sizeof(struct aead_request) + + ALIGN(crypto_aead_reqsize(aead), + crypto_tfm_ctx_alignment()) + + align + 16; + + return 0; +} + +static void crypto_rfc4309_exit_tfm(struct crypto_tfm *tfm) +{ + struct crypto_rfc4309_ctx *ctx = crypto_tfm_ctx(tfm); + + crypto_free_aead(ctx->child); +} + +static struct crypto_instance *crypto_rfc4309_alloc(struct rtattr **tb) +{ + struct crypto_attr_type *algt; + struct crypto_instance *inst; + struct crypto_aead_spawn *spawn; + struct crypto_alg *alg; + const char *ccm_name; + int err; + + algt = crypto_get_attr_type(tb); + err = PTR_ERR(algt); + if (IS_ERR(algt)) + return ERR_PTR(err); + + if ((algt->type ^ CRYPTO_ALG_TYPE_AEAD) & algt->mask) + return ERR_PTR(-EINVAL); + + ccm_name = crypto_attr_alg_name(tb[1]); + err = PTR_ERR(ccm_name); + if (IS_ERR(ccm_name)) + return ERR_PTR(err); + + inst = kzalloc(sizeof(*inst) + sizeof(*spawn), GFP_KERNEL); + if (!inst) + return ERR_PTR(-ENOMEM); + + spawn = crypto_instance_ctx(inst); + crypto_set_aead_spawn(spawn, inst); + err = crypto_grab_aead(spawn, ccm_name, 0, + crypto_requires_sync(algt->type, algt->mask)); + if (err) + goto out_free_inst; + + alg = crypto_aead_spawn_alg(spawn); + + err = -EINVAL; + + /* We only support 16-byte blocks. */ + if (alg->cra_aead.ivsize != 16) + goto out_drop_alg; + + /* Not a stream cipher? */ + if (alg->cra_blocksize != 1) + goto out_drop_alg; + + err = -ENAMETOOLONG; + if (snprintf(inst->alg.cra_name, CRYPTO_MAX_ALG_NAME, + "rfc4309(%s)", alg->cra_name) >= CRYPTO_MAX_ALG_NAME || + snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME, + "rfc4309(%s)", alg->cra_driver_name) >= + CRYPTO_MAX_ALG_NAME) + goto out_drop_alg; + + inst->alg.cra_flags = CRYPTO_ALG_TYPE_AEAD; + inst->alg.cra_flags |= alg->cra_flags & CRYPTO_ALG_ASYNC; + inst->alg.cra_priority = alg->cra_priority; + inst->alg.cra_blocksize = 1; + inst->alg.cra_alignmask = alg->cra_alignmask; + inst->alg.cra_type = &crypto_nivaead_type; + + inst->alg.cra_aead.ivsize = 8; + inst->alg.cra_aead.maxauthsize = 16; + + inst->alg.cra_ctxsize = sizeof(struct crypto_rfc4309_ctx); + + inst->alg.cra_init = crypto_rfc4309_init_tfm; + inst->alg.cra_exit = crypto_rfc4309_exit_tfm; + + inst->alg.cra_aead.setkey = crypto_rfc4309_setkey; + inst->alg.cra_aead.setauthsize = crypto_rfc4309_setauthsize; + inst->alg.cra_aead.encrypt = crypto_rfc4309_encrypt; + inst->alg.cra_aead.decrypt = crypto_rfc4309_decrypt; + + inst->alg.cra_aead.geniv = "seqiv"; + +out: + return inst; + +out_drop_alg: + crypto_drop_aead(spawn); +out_free_inst: + kfree(inst); + inst = ERR_PTR(err); + goto out; +} + +static void crypto_rfc4309_free(struct crypto_instance *inst) +{ + crypto_drop_spawn(crypto_instance_ctx(inst)); + kfree(inst); +} + +static struct crypto_template crypto_rfc4309_tmpl = { + .name = "rfc4309", + .alloc = crypto_rfc4309_alloc, + .free = crypto_rfc4309_free, + .module = THIS_MODULE, +}; + +static int __init crypto_ccm_module_init(void) +{ + int err; + + err = crypto_register_template(&crypto_ccm_base_tmpl); + if (err) + goto out; + + err = crypto_register_template(&crypto_ccm_tmpl); + if (err) + goto out_undo_base; + + err = crypto_register_template(&crypto_rfc4309_tmpl); + if (err) + goto out_undo_ccm; + +out: + return err; + +out_undo_ccm: + crypto_unregister_template(&crypto_ccm_tmpl); +out_undo_base: + crypto_unregister_template(&crypto_ccm_base_tmpl); + goto out; +} + +static void __exit crypto_ccm_module_exit(void) +{ + crypto_unregister_template(&crypto_rfc4309_tmpl); + crypto_unregister_template(&crypto_ccm_tmpl); + crypto_unregister_template(&crypto_ccm_base_tmpl); +} + +module_init(crypto_ccm_module_init); +module_exit(crypto_ccm_module_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Counter with CBC MAC"); +MODULE_ALIAS("ccm_base"); +MODULE_ALIAS("rfc4309"); -- cgit v1.2.3-59-g8ed1b From 93cc74e078eed8735585e5687903727bcfbcc8b4 Mon Sep 17 00:00:00 2001 From: Joy Latten Date: Wed, 12 Dec 2007 20:24:22 +0800 Subject: [CRYPTO] tcrypt: Add CCM vectors This patch adds 7 test vectors to tcrypt for CCM. The test vectors are from rfc 3610. There are about 10 more test vectors in RFC 3610 and 4 or 5 more in NIST. I can add these as time permits. I also needed to set authsize. CCM has a prerequisite of authsize. Signed-off-by: Joy Latten Signed-off-by: Herbert Xu --- crypto/tcrypt.c | 31 ++++++- crypto/tcrypt.h | 260 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 289 insertions(+), 2 deletions(-) diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c index 1142b4998c84..2b52df7bf833 100644 --- a/crypto/tcrypt.c +++ b/crypto/tcrypt.c @@ -266,8 +266,6 @@ static void test_aead(char *algo, int enc, struct aead_testvec *template, return; } - authsize = crypto_aead_authsize(tfm); - req = aead_request_alloc(tfm, GFP_KERNEL); if (!req) { printk(KERN_INFO "failed to allocate request for %s\n", algo); @@ -298,6 +296,15 @@ static void test_aead(char *algo, int enc, struct aead_testvec *template, goto out; } + authsize = abs(aead_tv[i].rlen - aead_tv[i].ilen); + ret = crypto_aead_setauthsize(tfm, authsize); + if (ret) { + printk(KERN_INFO + "failed to set authsize = %u\n", + authsize); + goto out; + } + sg_init_one(&sg[0], aead_tv[i].input, aead_tv[i].ilen + (enc ? authsize : 0)); @@ -374,6 +381,15 @@ static void test_aead(char *algo, int enc, struct aead_testvec *template, aead_tv[i].tap[k]); } + authsize = abs(aead_tv[i].rlen - aead_tv[i].ilen); + ret = crypto_aead_setauthsize(tfm, authsize); + if (ret) { + printk(KERN_INFO + "failed to set authsize = %u\n", + authsize); + goto out; + } + if (enc) sg[k - 1].length += authsize; @@ -1201,6 +1217,10 @@ static void do_test(void) AES_GCM_ENC_TEST_VECTORS); test_aead("gcm(aes)", DECRYPT, aes_gcm_dec_tv_template, AES_GCM_DEC_TEST_VECTORS); + test_aead("ccm(aes)", ENCRYPT, aes_ccm_enc_tv_template, + AES_CCM_ENC_TEST_VECTORS); + test_aead("ccm(aes)", DECRYPT, aes_ccm_dec_tv_template, + AES_CCM_DEC_TEST_VECTORS); //CAST5 test_cipher("ecb(cast5)", ENCRYPT, cast5_enc_tv_template, @@ -1557,6 +1577,13 @@ static void do_test(void) LZO_COMP_TEST_VECTORS, LZO_DECOMP_TEST_VECTORS); break; + case 37: + test_aead("ccm(aes)", ENCRYPT, aes_ccm_enc_tv_template, + AES_CCM_ENC_TEST_VECTORS); + test_aead("ccm(aes)", DECRYPT, aes_ccm_dec_tv_template, + AES_CCM_DEC_TEST_VECTORS); + break; + case 100: test_hash("hmac(md5)", hmac_md5_tv_template, HMAC_MD5_TEST_VECTORS); diff --git a/crypto/tcrypt.h b/crypto/tcrypt.h index 5b865092151d..f785e5618e11 100644 --- a/crypto/tcrypt.h +++ b/crypto/tcrypt.h @@ -2313,6 +2313,8 @@ static struct cipher_testvec cast6_dec_tv_template[] = { #define AES_CTR_DEC_TEST_VECTORS 6 #define AES_GCM_ENC_TEST_VECTORS 9 #define AES_GCM_DEC_TEST_VECTORS 8 +#define AES_CCM_ENC_TEST_VECTORS 7 +#define AES_CCM_DEC_TEST_VECTORS 7 static struct cipher_testvec aes_enc_tv_template[] = { { /* From FIPS-197 */ @@ -5028,6 +5030,264 @@ static struct aead_testvec aes_gcm_dec_tv_template[] = { } }; +static struct aead_testvec aes_ccm_enc_tv_template[] = { + { /* From RFC 3610 */ + .key = { 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, + 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf }, + .klen = 16, + .iv = { 0x01, 0x00, 0x00, 0x00, 0x03, 0x02, 0x01, 0x00, + 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0x00, 0x00 }, + .assoc = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07 }, + .alen = 8, + .input = { 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, + 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e }, + .ilen = 23, + .result = { 0x58, 0x8c, 0x97, 0x9a, 0x61, 0xc6, 0x63, 0xd2, + 0xf0, 0x66, 0xd0, 0xc2, 0xc0, 0xf9, 0x89, 0x80, + 0x6d, 0x5f, 0x6b, 0x61, 0xda, 0xc3, 0x84, 0x17, + 0xe8, 0xd1, 0x2c, 0xfd, 0xf9, 0x26, 0xe0 }, + .rlen = 31, + }, { + .key = { 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, + 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf }, + .klen = 16, + .iv = { 0x01, 0x00, 0x00, 0x00, 0x07, 0x06, 0x05, 0x04, + 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0x00, 0x00 }, + .assoc = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b }, + .alen = 12, + .input = { 0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11, 0x12, 0x13, + 0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1a, 0x1b, + 0x1c, 0x1d, 0x1e, 0x1f }, + .ilen = 20, + .result = { 0xdc, 0xf1, 0xfb, 0x7b, 0x5d, 0x9e, 0x23, 0xfb, + 0x9d, 0x4e, 0x13, 0x12, 0x53, 0x65, 0x8a, 0xd8, + 0x6e, 0xbd, 0xca, 0x3e, 0x51, 0xe8, 0x3f, 0x07, + 0x7d, 0x9c, 0x2d, 0x93 }, + .rlen = 28, + }, { + .key = { 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, + 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf }, + .klen = 16, + .iv = { 0x01, 0x00, 0x00, 0x00, 0x0b, 0x0a, 0x09, 0x08, + 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0x00, 0x00 }, + .assoc = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07 }, + .alen = 8, + .input = { 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, + 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, + 0x20 }, + .ilen = 25, + .result = { 0x82, 0x53, 0x1a, 0x60, 0xcc, 0x24, 0x94, 0x5a, + 0x4b, 0x82, 0x79, 0x18, 0x1a, 0xb5, 0xc8, 0x4d, + 0xf2, 0x1c, 0xe7, 0xf9, 0xb7, 0x3f, 0x42, 0xe1, + 0x97, 0xea, 0x9c, 0x07, 0xe5, 0x6b, 0x5e, 0xb1, + 0x7e, 0x5f, 0x4e }, + .rlen = 35, + }, { + .key = { 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, + 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf }, + .klen = 16, + .iv = { 0x01, 0x00, 0x00, 0x00, 0x0c, 0x0b, 0x0a, 0x09, + 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0x00, 0x00 }, + .assoc = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b }, + .alen = 12, + .input = { 0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11, 0x12, 0x13, + 0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1a, 0x1b, + 0x1c, 0x1d, 0x1e }, + .ilen = 19, + .result = { 0x07, 0x34, 0x25, 0x94, 0x15, 0x77, 0x85, 0x15, + 0x2b, 0x07, 0x40, 0x98, 0x33, 0x0a, 0xbb, 0x14, + 0x1b, 0x94, 0x7b, 0x56, 0x6a, 0xa9, 0x40, 0x6b, + 0x4d, 0x99, 0x99, 0x88, 0xdd }, + .rlen = 29, + }, { + .key = { 0xd7, 0x82, 0x8d, 0x13, 0xb2, 0xb0, 0xbd, 0xc3, + 0x25, 0xa7, 0x62, 0x36, 0xdf, 0x93, 0xcc, 0x6b }, + .klen = 16, + .iv = { 0x01, 0x00, 0x33, 0x56, 0x8e, 0xf7, 0xb2, 0x63, + 0x3c, 0x96, 0x96, 0x76, 0x6c, 0xfa, 0x00, 0x00 }, + .assoc = { 0x63, 0x01, 0x8f, 0x76, 0xdc, 0x8a, 0x1b, 0xcb }, + .alen = 8, + .input = { 0x90, 0x20, 0xea, 0x6f, 0x91, 0xbd, 0xd8, 0x5a, + 0xfa, 0x00, 0x39, 0xba, 0x4b, 0xaf, 0xf9, 0xbf, + 0xb7, 0x9c, 0x70, 0x28, 0x94, 0x9c, 0xd0, 0xec }, + .ilen = 24, + .result = { 0x4c, 0xcb, 0x1e, 0x7c, 0xa9, 0x81, 0xbe, 0xfa, + 0xa0, 0x72, 0x6c, 0x55, 0xd3, 0x78, 0x06, 0x12, + 0x98, 0xc8, 0x5c, 0x92, 0x81, 0x4a, 0xbc, 0x33, + 0xc5, 0x2e, 0xe8, 0x1d, 0x7d, 0x77, 0xc0, 0x8a }, + .rlen = 32, + }, { + .key = { 0xd7, 0x82, 0x8d, 0x13, 0xb2, 0xb0, 0xbd, 0xc3, + 0x25, 0xa7, 0x62, 0x36, 0xdf, 0x93, 0xcc, 0x6b }, + .klen = 16, + .iv = { 0x01, 0x00, 0xd5, 0x60, 0x91, 0x2d, 0x3f, 0x70, + 0x3c, 0x96, 0x96, 0x76, 0x6c, 0xfa, 0x00, 0x00 }, + .assoc = { 0xcd, 0x90, 0x44, 0xd2, 0xb7, 0x1f, 0xdb, 0x81, + 0x20, 0xea, 0x60, 0xc0 }, + .alen = 12, + .input = { 0x64, 0x35, 0xac, 0xba, 0xfb, 0x11, 0xa8, 0x2e, + 0x2f, 0x07, 0x1d, 0x7c, 0xa4, 0xa5, 0xeb, 0xd9, + 0x3a, 0x80, 0x3b, 0xa8, 0x7f }, + .ilen = 21, + .result = { 0x00, 0x97, 0x69, 0xec, 0xab, 0xdf, 0x48, 0x62, + 0x55, 0x94, 0xc5, 0x92, 0x51, 0xe6, 0x03, 0x57, + 0x22, 0x67, 0x5e, 0x04, 0xc8, 0x47, 0x09, 0x9e, + 0x5a, 0xe0, 0x70, 0x45, 0x51 }, + .rlen = 29, + }, { + .key = { 0xd7, 0x82, 0x8d, 0x13, 0xb2, 0xb0, 0xbd, 0xc3, + 0x25, 0xa7, 0x62, 0x36, 0xdf, 0x93, 0xcc, 0x6b }, + .klen = 16, + .iv = { 0x01, 0x00, 0x42, 0xff, 0xf8, 0xf1, 0x95, 0x1c, + 0x3c, 0x96, 0x96, 0x76, 0x6c, 0xfa, 0x00, 0x00 }, + .assoc = { 0xd8, 0x5b, 0xc7, 0xe6, 0x9f, 0x94, 0x4f, 0xb8 }, + .alen = 8, + .input = { 0x8a, 0x19, 0xb9, 0x50, 0xbc, 0xf7, 0x1a, 0x01, + 0x8e, 0x5e, 0x67, 0x01, 0xc9, 0x17, 0x87, 0x65, + 0x98, 0x09, 0xd6, 0x7d, 0xbe, 0xdd, 0x18 }, + .ilen = 23, + .result = { 0xbc, 0x21, 0x8d, 0xaa, 0x94, 0x74, 0x27, 0xb6, + 0xdb, 0x38, 0x6a, 0x99, 0xac, 0x1a, 0xef, 0x23, + 0xad, 0xe0, 0xb5, 0x29, 0x39, 0xcb, 0x6a, 0x63, + 0x7c, 0xf9, 0xbe, 0xc2, 0x40, 0x88, 0x97, 0xc6, + 0xba }, + .rlen = 33, + }, +}; + +static struct aead_testvec aes_ccm_dec_tv_template[] = { + { /* From RFC 3610 */ + .key = { 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, + 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf }, + .klen = 16, + .iv = { 0x01, 0x00, 0x00, 0x00, 0x03, 0x02, 0x01, 0x00, + 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0x00, 0x00 }, + .assoc = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07 }, + .alen = 8, + .input = { 0x58, 0x8c, 0x97, 0x9a, 0x61, 0xc6, 0x63, 0xd2, + 0xf0, 0x66, 0xd0, 0xc2, 0xc0, 0xf9, 0x89, 0x80, + 0x6d, 0x5f, 0x6b, 0x61, 0xda, 0xc3, 0x84, 0x17, + 0xe8, 0xd1, 0x2c, 0xfd, 0xf9, 0x26, 0xe0 }, + .ilen = 31, + .result = { 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, + 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e }, + .rlen = 23, + }, { + .key = { 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, + 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf }, + .klen = 16, + .iv = { 0x01, 0x00, 0x00, 0x00, 0x07, 0x06, 0x05, 0x04, + 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0x00, 0x00 }, + .assoc = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b }, + .alen = 12, + .input = { 0xdc, 0xf1, 0xfb, 0x7b, 0x5d, 0x9e, 0x23, 0xfb, + 0x9d, 0x4e, 0x13, 0x12, 0x53, 0x65, 0x8a, 0xd8, + 0x6e, 0xbd, 0xca, 0x3e, 0x51, 0xe8, 0x3f, 0x07, + 0x7d, 0x9c, 0x2d, 0x93 }, + .ilen = 28, + .result = { 0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11, 0x12, 0x13, + 0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1a, 0x1b, + 0x1c, 0x1d, 0x1e, 0x1f }, + .rlen = 20, + }, { + .key = { 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, + 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf }, + .klen = 16, + .iv = { 0x01, 0x00, 0x00, 0x00, 0x0b, 0x0a, 0x09, 0x08, + 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0x00, 0x00 }, + .assoc = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07 }, + .alen = 8, + .input = { 0x82, 0x53, 0x1a, 0x60, 0xcc, 0x24, 0x94, 0x5a, + 0x4b, 0x82, 0x79, 0x18, 0x1a, 0xb5, 0xc8, 0x4d, + 0xf2, 0x1c, 0xe7, 0xf9, 0xb7, 0x3f, 0x42, 0xe1, + 0x97, 0xea, 0x9c, 0x07, 0xe5, 0x6b, 0x5e, 0xb1, + 0x7e, 0x5f, 0x4e }, + .ilen = 35, + .result = { 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, + 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, + 0x20 }, + .rlen = 25, + }, { + .key = { 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, + 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf }, + .klen = 16, + .iv = { 0x01, 0x00, 0x00, 0x00, 0x0c, 0x0b, 0x0a, 0x09, + 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0x00, 0x00 }, + .assoc = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b }, + .alen = 12, + .input = { 0x07, 0x34, 0x25, 0x94, 0x15, 0x77, 0x85, 0x15, + 0x2b, 0x07, 0x40, 0x98, 0x33, 0x0a, 0xbb, 0x14, + 0x1b, 0x94, 0x7b, 0x56, 0x6a, 0xa9, 0x40, 0x6b, + 0x4d, 0x99, 0x99, 0x88, 0xdd }, + .ilen = 29, + .result = { 0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11, 0x12, 0x13, + 0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1a, 0x1b, + 0x1c, 0x1d, 0x1e }, + .rlen = 19, + }, { + .key = { 0xd7, 0x82, 0x8d, 0x13, 0xb2, 0xb0, 0xbd, 0xc3, + 0x25, 0xa7, 0x62, 0x36, 0xdf, 0x93, 0xcc, 0x6b }, + .klen = 16, + .iv = { 0x01, 0x00, 0x33, 0x56, 0x8e, 0xf7, 0xb2, 0x63, + 0x3c, 0x96, 0x96, 0x76, 0x6c, 0xfa, 0x00, 0x00 }, + .assoc = { 0x63, 0x01, 0x8f, 0x76, 0xdc, 0x8a, 0x1b, 0xcb }, + .alen = 8, + .input = { 0x4c, 0xcb, 0x1e, 0x7c, 0xa9, 0x81, 0xbe, 0xfa, + 0xa0, 0x72, 0x6c, 0x55, 0xd3, 0x78, 0x06, 0x12, + 0x98, 0xc8, 0x5c, 0x92, 0x81, 0x4a, 0xbc, 0x33, + 0xc5, 0x2e, 0xe8, 0x1d, 0x7d, 0x77, 0xc0, 0x8a }, + .ilen = 32, + .result = { 0x90, 0x20, 0xea, 0x6f, 0x91, 0xbd, 0xd8, 0x5a, + 0xfa, 0x00, 0x39, 0xba, 0x4b, 0xaf, 0xf9, 0xbf, + 0xb7, 0x9c, 0x70, 0x28, 0x94, 0x9c, 0xd0, 0xec }, + .rlen = 24, + }, { + .key = { 0xd7, 0x82, 0x8d, 0x13, 0xb2, 0xb0, 0xbd, 0xc3, + 0x25, 0xa7, 0x62, 0x36, 0xdf, 0x93, 0xcc, 0x6b }, + .klen = 16, + .iv = { 0x01, 0x00, 0xd5, 0x60, 0x91, 0x2d, 0x3f, 0x70, + 0x3c, 0x96, 0x96, 0x76, 0x6c, 0xfa, 0x00, 0x00 }, + .assoc = { 0xcd, 0x90, 0x44, 0xd2, 0xb7, 0x1f, 0xdb, 0x81, + 0x20, 0xea, 0x60, 0xc0 }, + .alen = 12, + .input = { 0x00, 0x97, 0x69, 0xec, 0xab, 0xdf, 0x48, 0x62, + 0x55, 0x94, 0xc5, 0x92, 0x51, 0xe6, 0x03, 0x57, + 0x22, 0x67, 0x5e, 0x04, 0xc8, 0x47, 0x09, 0x9e, + 0x5a, 0xe0, 0x70, 0x45, 0x51 }, + .ilen = 29, + .result = { 0x64, 0x35, 0xac, 0xba, 0xfb, 0x11, 0xa8, 0x2e, + 0x2f, 0x07, 0x1d, 0x7c, 0xa4, 0xa5, 0xeb, 0xd9, + 0x3a, 0x80, 0x3b, 0xa8, 0x7f }, + .rlen = 21, + }, { + .key = { 0xd7, 0x82, 0x8d, 0x13, 0xb2, 0xb0, 0xbd, 0xc3, + 0x25, 0xa7, 0x62, 0x36, 0xdf, 0x93, 0xcc, 0x6b }, + .klen = 16, + .iv = { 0x01, 0x00, 0x42, 0xff, 0xf8, 0xf1, 0x95, 0x1c, + 0x3c, 0x96, 0x96, 0x76, 0x6c, 0xfa, 0x00, 0x00 }, + .assoc = { 0xd8, 0x5b, 0xc7, 0xe6, 0x9f, 0x94, 0x4f, 0xb8 }, + .alen = 8, + .input = { 0xbc, 0x21, 0x8d, 0xaa, 0x94, 0x74, 0x27, 0xb6, + 0xdb, 0x38, 0x6a, 0x99, 0xac, 0x1a, 0xef, 0x23, + 0xad, 0xe0, 0xb5, 0x29, 0x39, 0xcb, 0x6a, 0x63, + 0x7c, 0xf9, 0xbe, 0xc2, 0x40, 0x88, 0x97, 0xc6, + 0xba }, + .ilen = 33, + .result = { 0x8a, 0x19, 0xb9, 0x50, 0xbc, 0xf7, 0x1a, 0x01, + 0x8e, 0x5e, 0x67, 0x01, 0xc9, 0x17, 0x87, 0x65, + 0x98, 0x09, 0xd6, 0x7d, 0xbe, 0xdd, 0x18 }, + .rlen = 23, + }, +}; + /* Cast5 test vectors from RFC 2144 */ #define CAST5_ENC_TEST_VECTORS 3 #define CAST5_DEC_TEST_VECTORS 3 -- cgit v1.2.3-59-g8ed1b From 3631c650c495d61b1dabf32eb26b46873636e918 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 13 Dec 2007 22:28:59 +0800 Subject: [CRYPTO] null: Add null blkcipher algorithm This patch adds a null blkcipher algorithm called ecb(cipher_null) for backwards compatibility. Previously the null algorithm when used by IPsec copied the data byte by byte. This new algorithm optimises that to a straight memcpy which lets us better measure inherent overheads in our IPsec code. Signed-off-by: Herbert Xu --- crypto/crypto_null.c | 69 ++++++++++++++++++++++++++++++++------ include/crypto/internal/skcipher.h | 5 +++ 2 files changed, 64 insertions(+), 10 deletions(-) diff --git a/crypto/crypto_null.c b/crypto/crypto_null.c index 29f77477d701..fc2d2a4d7789 100644 --- a/crypto/crypto_null.c +++ b/crypto/crypto_null.c @@ -16,15 +16,17 @@ * (at your option) any later version. * */ + +#include #include #include #include -#include #include #define NULL_KEY_SIZE 0 #define NULL_BLOCK_SIZE 1 #define NULL_DIGEST_SIZE 0 +#define NULL_IV_SIZE 0 static int null_compress(struct crypto_tfm *tfm, const u8 *src, unsigned int slen, u8 *dst, unsigned int *dlen) @@ -55,6 +57,26 @@ static void null_crypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) memcpy(dst, src, NULL_BLOCK_SIZE); } +static int skcipher_null_crypt(struct blkcipher_desc *desc, + struct scatterlist *dst, + struct scatterlist *src, unsigned int nbytes) +{ + struct blkcipher_walk walk; + int err; + + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt(desc, &walk); + + while (walk.nbytes) { + if (walk.src.virt.addr != walk.dst.virt.addr) + memcpy(walk.dst.virt.addr, walk.src.virt.addr, + walk.nbytes); + err = blkcipher_walk_done(desc, &walk, 0); + } + + return err; +} + static struct crypto_alg compress_null = { .cra_name = "compress_null", .cra_flags = CRYPTO_ALG_TYPE_COMPRESS, @@ -96,6 +118,25 @@ static struct crypto_alg cipher_null = { .cia_decrypt = null_crypt } } }; +static struct crypto_alg skcipher_null = { + .cra_name = "ecb(cipher_null)", + .cra_driver_name = "ecb-cipher_null", + .cra_priority = 100, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_blocksize = NULL_BLOCK_SIZE, + .cra_type = &crypto_blkcipher_type, + .cra_ctxsize = 0, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(skcipher_null.cra_list), + .cra_u = { .blkcipher = { + .min_keysize = NULL_KEY_SIZE, + .max_keysize = NULL_KEY_SIZE, + .ivsize = NULL_IV_SIZE, + .setkey = null_setkey, + .encrypt = skcipher_null_crypt, + .decrypt = skcipher_null_crypt } } +}; + MODULE_ALIAS("compress_null"); MODULE_ALIAS("digest_null"); MODULE_ALIAS("cipher_null"); @@ -108,27 +149,35 @@ static int __init init(void) if (ret < 0) goto out; + ret = crypto_register_alg(&skcipher_null); + if (ret < 0) + goto out_unregister_cipher; + ret = crypto_register_alg(&digest_null); - if (ret < 0) { - crypto_unregister_alg(&cipher_null); - goto out; - } + if (ret < 0) + goto out_unregister_skcipher; ret = crypto_register_alg(&compress_null); - if (ret < 0) { - crypto_unregister_alg(&digest_null); - crypto_unregister_alg(&cipher_null); - goto out; - } + if (ret < 0) + goto out_unregister_digest; out: return ret; + +out_unregister_digest: + crypto_unregister_alg(&digest_null); +out_unregister_skcipher: + crypto_unregister_alg(&skcipher_null); +out_unregister_cipher: + crypto_unregister_alg(&cipher_null); + goto out; } static void __exit fini(void) { crypto_unregister_alg(&compress_null); crypto_unregister_alg(&digest_null); + crypto_unregister_alg(&skcipher_null); crypto_unregister_alg(&cipher_null); } diff --git a/include/crypto/internal/skcipher.h b/include/crypto/internal/skcipher.h index 2071999d4b5e..0053f34764ff 100644 --- a/include/crypto/internal/skcipher.h +++ b/include/crypto/internal/skcipher.h @@ -88,5 +88,10 @@ static inline void skcipher_givcrypt_complete( ablkcipher_request_complete(&req->creq, err); } +static inline u32 ablkcipher_request_flags(struct ablkcipher_request *req) +{ + return req->base.flags; +} + #endif /* _CRYPTO_INTERNAL_SKCIPHER_H */ -- cgit v1.2.3-59-g8ed1b From ce5bd4aca3c467936370846119b7f3daf9ccea78 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 14 Dec 2007 00:28:40 +0800 Subject: [CRYPTO] null: Allow setkey on digest_null We need to allow setkey on digest_null if it is to be used directly by authenc instead of through hmac. Signed-off-by: Herbert Xu --- crypto/crypto_null.c | 1 + 1 file changed, 1 insertion(+) diff --git a/crypto/crypto_null.c b/crypto/crypto_null.c index fc2d2a4d7789..ff7b3de1bcfd 100644 --- a/crypto/crypto_null.c +++ b/crypto/crypto_null.c @@ -98,6 +98,7 @@ static struct crypto_alg digest_null = { .cra_list = LIST_HEAD_INIT(digest_null.cra_list), .cra_u = { .digest = { .dia_digestsize = NULL_DIGEST_SIZE, + .dia_setkey = null_setkey, .dia_init = null_init, .dia_update = null_update, .dia_final = null_final } } -- cgit v1.2.3-59-g8ed1b From 6e050778c5d08a97d5d98f7cb62bc503e872615c Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 14 Dec 2007 00:44:11 +0800 Subject: [CRYPTO] scatterwalk: Handle zero nbytes in scatterwalk_map_and_copy It's better to return silently than crash and burn when someone feeds us a zero length. In particular the null digest algorithm when used as part of authenc will do that to us. Signed-off-by: Herbert Xu --- crypto/scatterwalk.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/crypto/scatterwalk.c b/crypto/scatterwalk.c index 297e19d13c4e..9aeeb52004a5 100644 --- a/crypto/scatterwalk.c +++ b/crypto/scatterwalk.c @@ -105,6 +105,9 @@ void scatterwalk_map_and_copy(void *buf, struct scatterlist *sg, struct scatter_walk walk; unsigned int offset = 0; + if (!nbytes) + return; + for (;;) { scatterwalk_start(&walk, sg); -- cgit v1.2.3-59-g8ed1b From 4726204200327c04a77b819e2c653c063f1bc6ab Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 14 Dec 2007 10:19:27 +0800 Subject: [CRYPTO] seqiv: Add select AEAD in Kconfig Now that seqiv supports AEAD algorithms it needs to select the AEAD option. Thanks to Erez Zadok for pointing out the problem. Signed-off-by: Herbert Xu --- crypto/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/crypto/Kconfig b/crypto/Kconfig index 0d89f77428e5..6c086eedc14f 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -34,6 +34,7 @@ config CRYPTO_BLKCIPHER config CRYPTO_SEQIV tristate "Sequence Number IV Generator" + select CRYPTO_AEAD select CRYPTO_BLKCIPHER help This IV generator generates an IV based on a sequence number by -- cgit v1.2.3-59-g8ed1b From e7cd2514ea506f06bd4f7b13a9b62afd60f9c73b Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 14 Dec 2007 22:28:14 +0800 Subject: [CRYPTO] chainiv: Avoid lock spinning where possible This patch makes chainiv avoid spinning by postponing requests on lock contention if the user allows the use of asynchronous algorithms. If a synchronous algorithm is requested then we behave as before. This should improve IPsec performance on SMP when two CPUs attempt to transmit over the same SA. Currently one of them will spin doing nothing waiting for the other CPU to finish its encryption. This patch makes it postpone the request and get on with other work. If only one CPU is transmitting for a given SA, then we will process the request synchronously as before. Signed-off-by: Herbert Xu --- crypto/chainiv.c | 208 +++++++++++++++++++++++++++++++++++-- include/crypto/internal/skcipher.h | 13 +++ 2 files changed, 213 insertions(+), 8 deletions(-) diff --git a/crypto/chainiv.c b/crypto/chainiv.c index 38868d160b47..d17fa0454dc3 100644 --- a/crypto/chainiv.c +++ b/crypto/chainiv.c @@ -16,16 +16,34 @@ #include #include #include +#include #include #include #include #include +#include + +enum { + CHAINIV_STATE_INUSE = 0, +}; struct chainiv_ctx { spinlock_t lock; char iv[]; }; +struct async_chainiv_ctx { + unsigned long state; + + spinlock_t lock; + int err; + + struct crypto_queue queue; + struct work_struct postponed; + + char iv[]; +}; + static int chainiv_givencrypt(struct skcipher_givcrypt_request *req) { struct crypto_ablkcipher *geniv = skcipher_givcrypt_reqtfm(req); @@ -80,26 +98,187 @@ unlock: return chainiv_givencrypt(req); } +static int chainiv_init_common(struct crypto_tfm *tfm) +{ + tfm->crt_ablkcipher.reqsize = sizeof(struct ablkcipher_request); + + return skcipher_geniv_init(tfm); +} + static int chainiv_init(struct crypto_tfm *tfm) { - struct crypto_ablkcipher *geniv = __crypto_ablkcipher_cast(tfm); - struct chainiv_ctx *ctx = crypto_ablkcipher_ctx(geniv); + struct chainiv_ctx *ctx = crypto_tfm_ctx(tfm); spin_lock_init(&ctx->lock); - tfm->crt_ablkcipher.reqsize = sizeof(struct ablkcipher_request); + return chainiv_init_common(tfm); +} - return skcipher_geniv_init(tfm); +static int async_chainiv_schedule_work(struct async_chainiv_ctx *ctx) +{ + int queued; + + if (!ctx->queue.qlen) { + smp_mb__before_clear_bit(); + clear_bit(CHAINIV_STATE_INUSE, &ctx->state); + + if (!ctx->queue.qlen || + test_and_set_bit(CHAINIV_STATE_INUSE, &ctx->state)) + goto out; + } + + queued = schedule_work(&ctx->postponed); + BUG_ON(!queued); + +out: + return ctx->err; +} + +static int async_chainiv_postpone_request(struct skcipher_givcrypt_request *req) +{ + struct crypto_ablkcipher *geniv = skcipher_givcrypt_reqtfm(req); + struct async_chainiv_ctx *ctx = crypto_ablkcipher_ctx(geniv); + int err; + + spin_lock_bh(&ctx->lock); + err = skcipher_enqueue_givcrypt(&ctx->queue, req); + spin_unlock_bh(&ctx->lock); + + if (test_and_set_bit(CHAINIV_STATE_INUSE, &ctx->state)) + return err; + + ctx->err = err; + return async_chainiv_schedule_work(ctx); +} + +static int async_chainiv_givencrypt_tail(struct skcipher_givcrypt_request *req) +{ + struct crypto_ablkcipher *geniv = skcipher_givcrypt_reqtfm(req); + struct async_chainiv_ctx *ctx = crypto_ablkcipher_ctx(geniv); + struct ablkcipher_request *subreq = skcipher_givcrypt_reqctx(req); + unsigned int ivsize = crypto_ablkcipher_ivsize(geniv); + + memcpy(req->giv, ctx->iv, ivsize); + memcpy(subreq->info, ctx->iv, ivsize); + + ctx->err = crypto_ablkcipher_encrypt(subreq); + if (ctx->err) + goto out; + + memcpy(ctx->iv, subreq->info, ivsize); + +out: + return async_chainiv_schedule_work(ctx); +} + +static int async_chainiv_givencrypt(struct skcipher_givcrypt_request *req) +{ + struct crypto_ablkcipher *geniv = skcipher_givcrypt_reqtfm(req); + struct async_chainiv_ctx *ctx = crypto_ablkcipher_ctx(geniv); + struct ablkcipher_request *subreq = skcipher_givcrypt_reqctx(req); + + ablkcipher_request_set_tfm(subreq, skcipher_geniv_cipher(geniv)); + ablkcipher_request_set_callback(subreq, req->creq.base.flags, + req->creq.base.complete, + req->creq.base.data); + ablkcipher_request_set_crypt(subreq, req->creq.src, req->creq.dst, + req->creq.nbytes, req->creq.info); + + if (test_and_set_bit(CHAINIV_STATE_INUSE, &ctx->state)) + goto postpone; + + if (ctx->queue.qlen) { + clear_bit(CHAINIV_STATE_INUSE, &ctx->state); + goto postpone; + } + + return async_chainiv_givencrypt_tail(req); + +postpone: + return async_chainiv_postpone_request(req); +} + +static int async_chainiv_givencrypt_first(struct skcipher_givcrypt_request *req) +{ + struct crypto_ablkcipher *geniv = skcipher_givcrypt_reqtfm(req); + struct async_chainiv_ctx *ctx = crypto_ablkcipher_ctx(geniv); + + if (test_and_set_bit(CHAINIV_STATE_INUSE, &ctx->state)) + goto out; + + if (crypto_ablkcipher_crt(geniv)->givencrypt != + async_chainiv_givencrypt_first) + goto unlock; + + crypto_ablkcipher_crt(geniv)->givencrypt = async_chainiv_givencrypt; + get_random_bytes(ctx->iv, crypto_ablkcipher_ivsize(geniv)); + +unlock: + clear_bit(CHAINIV_STATE_INUSE, &ctx->state); + +out: + return async_chainiv_givencrypt(req); +} + +static void async_chainiv_do_postponed(struct work_struct *work) +{ + struct async_chainiv_ctx *ctx = container_of(work, + struct async_chainiv_ctx, + postponed); + struct skcipher_givcrypt_request *req; + struct ablkcipher_request *subreq; + + /* Only handle one request at a time to avoid hogging keventd. */ + spin_lock_bh(&ctx->lock); + req = skcipher_dequeue_givcrypt(&ctx->queue); + spin_unlock_bh(&ctx->lock); + + if (!req) { + async_chainiv_schedule_work(ctx); + return; + } + + subreq = skcipher_givcrypt_reqctx(req); + subreq->base.flags |= CRYPTO_TFM_REQ_MAY_SLEEP; + + async_chainiv_givencrypt_tail(req); +} + +static int async_chainiv_init(struct crypto_tfm *tfm) +{ + struct async_chainiv_ctx *ctx = crypto_tfm_ctx(tfm); + + spin_lock_init(&ctx->lock); + + crypto_init_queue(&ctx->queue, 100); + INIT_WORK(&ctx->postponed, async_chainiv_do_postponed); + + return chainiv_init_common(tfm); +} + +static void async_chainiv_exit(struct crypto_tfm *tfm) +{ + struct async_chainiv_ctx *ctx = crypto_tfm_ctx(tfm); + + BUG_ON(test_bit(CHAINIV_STATE_INUSE, &ctx->state) || ctx->queue.qlen); + + skcipher_geniv_exit(tfm); } static struct crypto_template chainiv_tmpl; static struct crypto_instance *chainiv_alloc(struct rtattr **tb) { + struct crypto_attr_type *algt; struct crypto_instance *inst; + int err; - inst = skcipher_geniv_alloc(&chainiv_tmpl, tb, 0, - CRYPTO_ALG_ASYNC); + algt = crypto_get_attr_type(tb); + err = PTR_ERR(algt); + if (IS_ERR(algt)) + return ERR_PTR(err); + + inst = skcipher_geniv_alloc(&chainiv_tmpl, tb, 0, 0); if (IS_ERR(inst)) goto out; @@ -108,8 +287,21 @@ static struct crypto_instance *chainiv_alloc(struct rtattr **tb) inst->alg.cra_init = chainiv_init; inst->alg.cra_exit = skcipher_geniv_exit; - inst->alg.cra_ctxsize = sizeof(struct chainiv_ctx) + - inst->alg.cra_ablkcipher.ivsize; + inst->alg.cra_ctxsize = sizeof(struct chainiv_ctx); + + if (!crypto_requires_sync(algt->type, algt->mask)) { + inst->alg.cra_flags |= CRYPTO_ALG_ASYNC; + + inst->alg.cra_ablkcipher.givencrypt = + async_chainiv_givencrypt_first; + + inst->alg.cra_init = async_chainiv_init; + inst->alg.cra_exit = async_chainiv_exit; + + inst->alg.cra_ctxsize = sizeof(struct async_chainiv_ctx); + } + + inst->alg.cra_ctxsize += inst->alg.cra_ablkcipher.ivsize; out: return inst; diff --git a/include/crypto/internal/skcipher.h b/include/crypto/internal/skcipher.h index 0053f34764ff..2ba42cd7d6aa 100644 --- a/include/crypto/internal/skcipher.h +++ b/include/crypto/internal/skcipher.h @@ -70,6 +70,19 @@ static inline struct crypto_ablkcipher *skcipher_geniv_cipher( return crypto_ablkcipher_crt(geniv)->base; } +static inline int skcipher_enqueue_givcrypt( + struct crypto_queue *queue, struct skcipher_givcrypt_request *request) +{ + return ablkcipher_enqueue_request(queue, &request->creq); +} + +static inline struct skcipher_givcrypt_request *skcipher_dequeue_givcrypt( + struct crypto_queue *queue) +{ + return container_of(ablkcipher_dequeue_request(queue), + struct skcipher_givcrypt_request, creq); +} + static inline void *skcipher_givcrypt_reqctx( struct skcipher_givcrypt_request *req) { -- cgit v1.2.3-59-g8ed1b From 189ed66e95fb23666a62963b718dcbe62adbadde Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 14 Dec 2007 22:29:37 +0800 Subject: [CRYPTO] api: Show async type This patch adds an async field to /proc/crypto for ablkcipher and aead algorithms. Signed-off-by: Herbert Xu --- crypto/ablkcipher.c | 4 ++++ crypto/aead.c | 4 ++++ 2 files changed, 8 insertions(+) diff --git a/crypto/ablkcipher.c b/crypto/ablkcipher.c index d1df528c8fa3..3bcb099b4a85 100644 --- a/crypto/ablkcipher.c +++ b/crypto/ablkcipher.c @@ -109,6 +109,8 @@ static void crypto_ablkcipher_show(struct seq_file *m, struct crypto_alg *alg) struct ablkcipher_alg *ablkcipher = &alg->cra_ablkcipher; seq_printf(m, "type : ablkcipher\n"); + seq_printf(m, "async : %s\n", alg->cra_flags & CRYPTO_ALG_ASYNC ? + "yes" : "no"); seq_printf(m, "blocksize : %u\n", alg->cra_blocksize); seq_printf(m, "min keysize : %u\n", ablkcipher->min_keysize); seq_printf(m, "max keysize : %u\n", ablkcipher->max_keysize); @@ -158,6 +160,8 @@ static void crypto_givcipher_show(struct seq_file *m, struct crypto_alg *alg) struct ablkcipher_alg *ablkcipher = &alg->cra_ablkcipher; seq_printf(m, "type : givcipher\n"); + seq_printf(m, "async : %s\n", alg->cra_flags & CRYPTO_ALG_ASYNC ? + "yes" : "no"); seq_printf(m, "blocksize : %u\n", alg->cra_blocksize); seq_printf(m, "min keysize : %u\n", ablkcipher->min_keysize); seq_printf(m, "max keysize : %u\n", ablkcipher->max_keysize); diff --git a/crypto/aead.c b/crypto/aead.c index f5b1add31976..3a6f3f52c7c7 100644 --- a/crypto/aead.c +++ b/crypto/aead.c @@ -115,6 +115,8 @@ static void crypto_aead_show(struct seq_file *m, struct crypto_alg *alg) struct aead_alg *aead = &alg->cra_aead; seq_printf(m, "type : aead\n"); + seq_printf(m, "async : %s\n", alg->cra_flags & CRYPTO_ALG_ASYNC ? + "yes" : "no"); seq_printf(m, "blocksize : %u\n", alg->cra_blocksize); seq_printf(m, "ivsize : %u\n", aead->ivsize); seq_printf(m, "maxauthsize : %u\n", aead->maxauthsize); @@ -169,6 +171,8 @@ static void crypto_nivaead_show(struct seq_file *m, struct crypto_alg *alg) struct aead_alg *aead = &alg->cra_aead; seq_printf(m, "type : nivaead\n"); + seq_printf(m, "async : %s\n", alg->cra_flags & CRYPTO_ALG_ASYNC ? + "yes" : "no"); seq_printf(m, "blocksize : %u\n", alg->cra_blocksize); seq_printf(m, "ivsize : %u\n", aead->ivsize); seq_printf(m, "maxauthsize : %u\n", aead->maxauthsize); -- cgit v1.2.3-59-g8ed1b From dadbc53d0bbde0e84c40b9f6bc5c50eb9eb7352a Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 17 Dec 2007 15:33:17 +0800 Subject: [CRYPTO] gcm: Introduce rfc4106 This patch introduces the rfc4106 wrapper for GCM just as we have an rfc4309 wrapper for CCM. The purpose of the wrapper is to include part of the IV in the key so that it can be negotiated by IPsec. Signed-off-by: Herbert Xu --- crypto/gcm.c | 239 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 239 insertions(+) diff --git a/crypto/gcm.c b/crypto/gcm.c index d539f5e56879..e70afd0c73dd 100644 --- a/crypto/gcm.c +++ b/crypto/gcm.c @@ -9,6 +9,7 @@ */ #include +#include #include #include #include @@ -27,6 +28,11 @@ struct crypto_gcm_ctx { struct gf128mul_4k *gf128; }; +struct crypto_rfc4106_ctx { + struct crypto_aead *child; + u8 nonce[4]; +}; + struct crypto_gcm_ghash_ctx { u32 bytes; u32 flags; @@ -240,6 +246,25 @@ out: return err; } +static int crypto_gcm_setauthsize(struct crypto_aead *tfm, + unsigned int authsize) +{ + switch (authsize) { + case 4: + case 8: + case 12: + case 13: + case 14: + case 15: + case 16: + break; + default: + return -EINVAL; + } + + return 0; +} + static void crypto_gcm_init_crypt(struct ablkcipher_request *ablk_req, struct aead_request *req, unsigned int cryptlen) @@ -472,6 +497,7 @@ static struct crypto_instance *crypto_gcm_alloc_common(struct rtattr **tb, inst->alg.cra_init = crypto_gcm_init_tfm; inst->alg.cra_exit = crypto_gcm_exit_tfm; inst->alg.cra_aead.setkey = crypto_gcm_setkey; + inst->alg.cra_aead.setauthsize = crypto_gcm_setauthsize; inst->alg.cra_aead.encrypt = crypto_gcm_encrypt; inst->alg.cra_aead.decrypt = crypto_gcm_decrypt; @@ -549,6 +575,211 @@ static struct crypto_template crypto_gcm_base_tmpl = { .module = THIS_MODULE, }; +static int crypto_rfc4106_setkey(struct crypto_aead *parent, const u8 *key, + unsigned int keylen) +{ + struct crypto_rfc4106_ctx *ctx = crypto_aead_ctx(parent); + struct crypto_aead *child = ctx->child; + int err; + + if (keylen < 4) + return -EINVAL; + + keylen -= 4; + memcpy(ctx->nonce, key + keylen, 4); + + crypto_aead_clear_flags(child, CRYPTO_TFM_REQ_MASK); + crypto_aead_set_flags(child, crypto_aead_get_flags(parent) & + CRYPTO_TFM_REQ_MASK); + err = crypto_aead_setkey(child, key, keylen); + crypto_aead_set_flags(parent, crypto_aead_get_flags(child) & + CRYPTO_TFM_RES_MASK); + + return err; +} + +static int crypto_rfc4106_setauthsize(struct crypto_aead *parent, + unsigned int authsize) +{ + struct crypto_rfc4106_ctx *ctx = crypto_aead_ctx(parent); + + switch (authsize) { + case 8: + case 12: + case 16: + break; + default: + return -EINVAL; + } + + return crypto_aead_setauthsize(ctx->child, authsize); +} + +static struct aead_request *crypto_rfc4106_crypt(struct aead_request *req) +{ + struct aead_request *subreq = aead_request_ctx(req); + struct crypto_aead *aead = crypto_aead_reqtfm(req); + struct crypto_rfc4106_ctx *ctx = crypto_aead_ctx(aead); + struct crypto_aead *child = ctx->child; + u8 *iv = PTR_ALIGN((u8 *)(subreq + 1) + crypto_aead_reqsize(child), + crypto_aead_alignmask(child) + 1); + + memcpy(iv, ctx->nonce, 4); + memcpy(iv + 4, req->iv, 8); + + aead_request_set_tfm(subreq, child); + aead_request_set_callback(subreq, req->base.flags, req->base.complete, + req->base.data); + aead_request_set_crypt(subreq, req->src, req->dst, req->cryptlen, iv); + aead_request_set_assoc(subreq, req->assoc, req->assoclen); + + return subreq; +} + +static int crypto_rfc4106_encrypt(struct aead_request *req) +{ + req = crypto_rfc4106_crypt(req); + + return crypto_aead_encrypt(req); +} + +static int crypto_rfc4106_decrypt(struct aead_request *req) +{ + req = crypto_rfc4106_crypt(req); + + return crypto_aead_decrypt(req); +} + +static int crypto_rfc4106_init_tfm(struct crypto_tfm *tfm) +{ + struct crypto_instance *inst = (void *)tfm->__crt_alg; + struct crypto_aead_spawn *spawn = crypto_instance_ctx(inst); + struct crypto_rfc4106_ctx *ctx = crypto_tfm_ctx(tfm); + struct crypto_aead *aead; + unsigned long align; + + aead = crypto_spawn_aead(spawn); + if (IS_ERR(aead)) + return PTR_ERR(aead); + + ctx->child = aead; + + align = crypto_aead_alignmask(aead); + align &= ~(crypto_tfm_ctx_alignment() - 1); + tfm->crt_aead.reqsize = sizeof(struct aead_request) + + ALIGN(crypto_aead_reqsize(aead), + crypto_tfm_ctx_alignment()) + + align + 16; + + return 0; +} + +static void crypto_rfc4106_exit_tfm(struct crypto_tfm *tfm) +{ + struct crypto_rfc4106_ctx *ctx = crypto_tfm_ctx(tfm); + + crypto_free_aead(ctx->child); +} + +static struct crypto_instance *crypto_rfc4106_alloc(struct rtattr **tb) +{ + struct crypto_attr_type *algt; + struct crypto_instance *inst; + struct crypto_aead_spawn *spawn; + struct crypto_alg *alg; + const char *ccm_name; + int err; + + algt = crypto_get_attr_type(tb); + err = PTR_ERR(algt); + if (IS_ERR(algt)) + return ERR_PTR(err); + + if ((algt->type ^ CRYPTO_ALG_TYPE_AEAD) & algt->mask) + return ERR_PTR(-EINVAL); + + ccm_name = crypto_attr_alg_name(tb[1]); + err = PTR_ERR(ccm_name); + if (IS_ERR(ccm_name)) + return ERR_PTR(err); + + inst = kzalloc(sizeof(*inst) + sizeof(*spawn), GFP_KERNEL); + if (!inst) + return ERR_PTR(-ENOMEM); + + spawn = crypto_instance_ctx(inst); + crypto_set_aead_spawn(spawn, inst); + err = crypto_grab_aead(spawn, ccm_name, 0, + crypto_requires_sync(algt->type, algt->mask)); + if (err) + goto out_free_inst; + + alg = crypto_aead_spawn_alg(spawn); + + err = -EINVAL; + + /* We only support 16-byte blocks. */ + if (alg->cra_aead.ivsize != 16) + goto out_drop_alg; + + /* Not a stream cipher? */ + if (alg->cra_blocksize != 1) + goto out_drop_alg; + + err = -ENAMETOOLONG; + if (snprintf(inst->alg.cra_name, CRYPTO_MAX_ALG_NAME, + "rfc4106(%s)", alg->cra_name) >= CRYPTO_MAX_ALG_NAME || + snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME, + "rfc4106(%s)", alg->cra_driver_name) >= + CRYPTO_MAX_ALG_NAME) + goto out_drop_alg; + + inst->alg.cra_flags = CRYPTO_ALG_TYPE_AEAD; + inst->alg.cra_flags |= alg->cra_flags & CRYPTO_ALG_ASYNC; + inst->alg.cra_priority = alg->cra_priority; + inst->alg.cra_blocksize = 1; + inst->alg.cra_alignmask = alg->cra_alignmask; + inst->alg.cra_type = &crypto_nivaead_type; + + inst->alg.cra_aead.ivsize = 8; + inst->alg.cra_aead.maxauthsize = 16; + + inst->alg.cra_ctxsize = sizeof(struct crypto_rfc4106_ctx); + + inst->alg.cra_init = crypto_rfc4106_init_tfm; + inst->alg.cra_exit = crypto_rfc4106_exit_tfm; + + inst->alg.cra_aead.setkey = crypto_rfc4106_setkey; + inst->alg.cra_aead.setauthsize = crypto_rfc4106_setauthsize; + inst->alg.cra_aead.encrypt = crypto_rfc4106_encrypt; + inst->alg.cra_aead.decrypt = crypto_rfc4106_decrypt; + + inst->alg.cra_aead.geniv = "seqiv"; + +out: + return inst; + +out_drop_alg: + crypto_drop_aead(spawn); +out_free_inst: + kfree(inst); + inst = ERR_PTR(err); + goto out; +} + +static void crypto_rfc4106_free(struct crypto_instance *inst) +{ + crypto_drop_spawn(crypto_instance_ctx(inst)); + kfree(inst); +} + +static struct crypto_template crypto_rfc4106_tmpl = { + .name = "rfc4106", + .alloc = crypto_rfc4106_alloc, + .free = crypto_rfc4106_free, + .module = THIS_MODULE, +}; + static int __init crypto_gcm_module_init(void) { int err; @@ -561,9 +792,15 @@ static int __init crypto_gcm_module_init(void) if (err) goto out_undo_base; + err = crypto_register_template(&crypto_rfc4106_tmpl); + if (err) + goto out_undo_gcm; + out: return err; +out_undo_gcm: + crypto_unregister_template(&crypto_gcm_tmpl); out_undo_base: crypto_unregister_template(&crypto_gcm_base_tmpl); goto out; @@ -571,6 +808,7 @@ out_undo_base: static void __exit crypto_gcm_module_exit(void) { + crypto_unregister_template(&crypto_rfc4106_tmpl); crypto_unregister_template(&crypto_gcm_tmpl); crypto_unregister_template(&crypto_gcm_base_tmpl); } @@ -582,3 +820,4 @@ MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Galois/Counter Mode"); MODULE_AUTHOR("Mikko Herranen "); MODULE_ALIAS("gcm_base"); +MODULE_ALIAS("rfc4106"); -- cgit v1.2.3-59-g8ed1b From 974e4b752ee623854c5dc2bbfc7c7725029ce173 Mon Sep 17 00:00:00 2001 From: Tan Swee Heng Date: Mon, 10 Dec 2007 15:52:56 +0800 Subject: [CRYPTO] salsa20_i586: Salsa20 stream cipher algorithm (i586 version) This patch contains the salsa20-i586 implementation. The original assembly code came from . I have reformatted it (added indents) so that it matches the other algorithms in arch/x86/crypto. Signed-off-by: Tan Swee Heng Signed-off-by: Herbert Xu --- arch/x86/crypto/Makefile | 2 + arch/x86/crypto/salsa20-i586-asm_32.S | 1114 +++++++++++++++++++++++++++++++++ arch/x86/crypto/salsa20_glue.c | 127 ++++ crypto/Kconfig | 15 + 4 files changed, 1258 insertions(+) create mode 100644 arch/x86/crypto/salsa20-i586-asm_32.S create mode 100644 arch/x86/crypto/salsa20_glue.c diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile index b8fbb43df6d7..25cc8441046a 100644 --- a/arch/x86/crypto/Makefile +++ b/arch/x86/crypto/Makefile @@ -4,12 +4,14 @@ obj-$(CONFIG_CRYPTO_AES_586) += aes-i586.o obj-$(CONFIG_CRYPTO_TWOFISH_586) += twofish-i586.o +obj-$(CONFIG_CRYPTO_SALSA20_586) += salsa20-i586.o obj-$(CONFIG_CRYPTO_AES_X86_64) += aes-x86_64.o obj-$(CONFIG_CRYPTO_TWOFISH_X86_64) += twofish-x86_64.o aes-i586-y := aes-i586-asm_32.o aes_glue.o twofish-i586-y := twofish-i586-asm_32.o twofish_32.o +salsa20-i586-y := salsa20-i586-asm_32.o salsa20_glue.o aes-x86_64-y := aes-x86_64-asm_64.o aes_glue.o twofish-x86_64-y := twofish-x86_64-asm_64.o twofish_64.o diff --git a/arch/x86/crypto/salsa20-i586-asm_32.S b/arch/x86/crypto/salsa20-i586-asm_32.S new file mode 100644 index 000000000000..72eb306680b2 --- /dev/null +++ b/arch/x86/crypto/salsa20-i586-asm_32.S @@ -0,0 +1,1114 @@ +# salsa20_pm.s version 20051229 +# D. J. Bernstein +# Public domain. + +# enter ECRYPT_encrypt_bytes +.text +.p2align 5 +.globl ECRYPT_encrypt_bytes +ECRYPT_encrypt_bytes: + mov %esp,%eax + and $31,%eax + add $256,%eax + sub %eax,%esp + # eax_stack = eax + movl %eax,80(%esp) + # ebx_stack = ebx + movl %ebx,84(%esp) + # esi_stack = esi + movl %esi,88(%esp) + # edi_stack = edi + movl %edi,92(%esp) + # ebp_stack = ebp + movl %ebp,96(%esp) + # x = arg1 + movl 4(%esp,%eax),%edx + # m = arg2 + movl 8(%esp,%eax),%esi + # out = arg3 + movl 12(%esp,%eax),%edi + # bytes = arg4 + movl 16(%esp,%eax),%ebx + # bytes -= 0 + sub $0,%ebx + # goto done if unsigned<= + jbe ._done +._start: + # in0 = *(uint32 *) (x + 0) + movl 0(%edx),%eax + # in1 = *(uint32 *) (x + 4) + movl 4(%edx),%ecx + # in2 = *(uint32 *) (x + 8) + movl 8(%edx),%ebp + # j0 = in0 + movl %eax,164(%esp) + # in3 = *(uint32 *) (x + 12) + movl 12(%edx),%eax + # j1 = in1 + movl %ecx,168(%esp) + # in4 = *(uint32 *) (x + 16) + movl 16(%edx),%ecx + # j2 = in2 + movl %ebp,172(%esp) + # in5 = *(uint32 *) (x + 20) + movl 20(%edx),%ebp + # j3 = in3 + movl %eax,176(%esp) + # in6 = *(uint32 *) (x + 24) + movl 24(%edx),%eax + # j4 = in4 + movl %ecx,180(%esp) + # in7 = *(uint32 *) (x + 28) + movl 28(%edx),%ecx + # j5 = in5 + movl %ebp,184(%esp) + # in8 = *(uint32 *) (x + 32) + movl 32(%edx),%ebp + # j6 = in6 + movl %eax,188(%esp) + # in9 = *(uint32 *) (x + 36) + movl 36(%edx),%eax + # j7 = in7 + movl %ecx,192(%esp) + # in10 = *(uint32 *) (x + 40) + movl 40(%edx),%ecx + # j8 = in8 + movl %ebp,196(%esp) + # in11 = *(uint32 *) (x + 44) + movl 44(%edx),%ebp + # j9 = in9 + movl %eax,200(%esp) + # in12 = *(uint32 *) (x + 48) + movl 48(%edx),%eax + # j10 = in10 + movl %ecx,204(%esp) + # in13 = *(uint32 *) (x + 52) + movl 52(%edx),%ecx + # j11 = in11 + movl %ebp,208(%esp) + # in14 = *(uint32 *) (x + 56) + movl 56(%edx),%ebp + # j12 = in12 + movl %eax,212(%esp) + # in15 = *(uint32 *) (x + 60) + movl 60(%edx),%eax + # j13 = in13 + movl %ecx,216(%esp) + # j14 = in14 + movl %ebp,220(%esp) + # j15 = in15 + movl %eax,224(%esp) + # x_backup = x + movl %edx,64(%esp) +._bytesatleast1: + # bytes - 64 + cmp $64,%ebx + # goto nocopy if unsigned>= + jae ._nocopy + # ctarget = out + movl %edi,228(%esp) + # out = &tmp + leal 0(%esp),%edi + # i = bytes + mov %ebx,%ecx + # while (i) { *out++ = *m++; --i } + rep movsb + # out = &tmp + leal 0(%esp),%edi + # m = &tmp + leal 0(%esp),%esi +._nocopy: + # out_backup = out + movl %edi,72(%esp) + # m_backup = m + movl %esi,68(%esp) + # bytes_backup = bytes + movl %ebx,76(%esp) + # in0 = j0 + movl 164(%esp),%eax + # in1 = j1 + movl 168(%esp),%ecx + # in2 = j2 + movl 172(%esp),%edx + # in3 = j3 + movl 176(%esp),%ebx + # x0 = in0 + movl %eax,100(%esp) + # x1 = in1 + movl %ecx,104(%esp) + # x2 = in2 + movl %edx,108(%esp) + # x3 = in3 + movl %ebx,112(%esp) + # in4 = j4 + movl 180(%esp),%eax + # in5 = j5 + movl 184(%esp),%ecx + # in6 = j6 + movl 188(%esp),%edx + # in7 = j7 + movl 192(%esp),%ebx + # x4 = in4 + movl %eax,116(%esp) + # x5 = in5 + movl %ecx,120(%esp) + # x6 = in6 + movl %edx,124(%esp) + # x7 = in7 + movl %ebx,128(%esp) + # in8 = j8 + movl 196(%esp),%eax + # in9 = j9 + movl 200(%esp),%ecx + # in10 = j10 + movl 204(%esp),%edx + # in11 = j11 + movl 208(%esp),%ebx + # x8 = in8 + movl %eax,132(%esp) + # x9 = in9 + movl %ecx,136(%esp) + # x10 = in10 + movl %edx,140(%esp) + # x11 = in11 + movl %ebx,144(%esp) + # in12 = j12 + movl 212(%esp),%eax + # in13 = j13 + movl 216(%esp),%ecx + # in14 = j14 + movl 220(%esp),%edx + # in15 = j15 + movl 224(%esp),%ebx + # x12 = in12 + movl %eax,148(%esp) + # x13 = in13 + movl %ecx,152(%esp) + # x14 = in14 + movl %edx,156(%esp) + # x15 = in15 + movl %ebx,160(%esp) + # i = 20 + mov $20,%ebp + # p = x0 + movl 100(%esp),%eax + # s = x5 + movl 120(%esp),%ecx + # t = x10 + movl 140(%esp),%edx + # w = x15 + movl 160(%esp),%ebx +._mainloop: + # x0 = p + movl %eax,100(%esp) + # x10 = t + movl %edx,140(%esp) + # p += x12 + addl 148(%esp),%eax + # x5 = s + movl %ecx,120(%esp) + # t += x6 + addl 124(%esp),%edx + # x15 = w + movl %ebx,160(%esp) + # r = x1 + movl 104(%esp),%esi + # r += s + add %ecx,%esi + # v = x11 + movl 144(%esp),%edi + # v += w + add %ebx,%edi + # p <<<= 7 + rol $7,%eax + # p ^= x4 + xorl 116(%esp),%eax + # t <<<= 7 + rol $7,%edx + # t ^= x14 + xorl 156(%esp),%edx + # r <<<= 7 + rol $7,%esi + # r ^= x9 + xorl 136(%esp),%esi + # v <<<= 7 + rol $7,%edi + # v ^= x3 + xorl 112(%esp),%edi + # x4 = p + movl %eax,116(%esp) + # x14 = t + movl %edx,156(%esp) + # p += x0 + addl 100(%esp),%eax + # x9 = r + movl %esi,136(%esp) + # t += x10 + addl 140(%esp),%edx + # x3 = v + movl %edi,112(%esp) + # p <<<= 9 + rol $9,%eax + # p ^= x8 + xorl 132(%esp),%eax + # t <<<= 9 + rol $9,%edx + # t ^= x2 + xorl 108(%esp),%edx + # s += r + add %esi,%ecx + # s <<<= 9 + rol $9,%ecx + # s ^= x13 + xorl 152(%esp),%ecx + # w += v + add %edi,%ebx + # w <<<= 9 + rol $9,%ebx + # w ^= x7 + xorl 128(%esp),%ebx + # x8 = p + movl %eax,132(%esp) + # x2 = t + movl %edx,108(%esp) + # p += x4 + addl 116(%esp),%eax + # x13 = s + movl %ecx,152(%esp) + # t += x14 + addl 156(%esp),%edx + # x7 = w + movl %ebx,128(%esp) + # p <<<= 13 + rol $13,%eax + # p ^= x12 + xorl 148(%esp),%eax + # t <<<= 13 + rol $13,%edx + # t ^= x6 + xorl 124(%esp),%edx + # r += s + add %ecx,%esi + # r <<<= 13 + rol $13,%esi + # r ^= x1 + xorl 104(%esp),%esi + # v += w + add %ebx,%edi + # v <<<= 13 + rol $13,%edi + # v ^= x11 + xorl 144(%esp),%edi + # x12 = p + movl %eax,148(%esp) + # x6 = t + movl %edx,124(%esp) + # p += x8 + addl 132(%esp),%eax + # x1 = r + movl %esi,104(%esp) + # t += x2 + addl 108(%esp),%edx + # x11 = v + movl %edi,144(%esp) + # p <<<= 18 + rol $18,%eax + # p ^= x0 + xorl 100(%esp),%eax + # t <<<= 18 + rol $18,%edx + # t ^= x10 + xorl 140(%esp),%edx + # s += r + add %esi,%ecx + # s <<<= 18 + rol $18,%ecx + # s ^= x5 + xorl 120(%esp),%ecx + # w += v + add %edi,%ebx + # w <<<= 18 + rol $18,%ebx + # w ^= x15 + xorl 160(%esp),%ebx + # x0 = p + movl %eax,100(%esp) + # x10 = t + movl %edx,140(%esp) + # p += x3 + addl 112(%esp),%eax + # p <<<= 7 + rol $7,%eax + # x5 = s + movl %ecx,120(%esp) + # t += x9 + addl 136(%esp),%edx + # x15 = w + movl %ebx,160(%esp) + # r = x4 + movl 116(%esp),%esi + # r += s + add %ecx,%esi + # v = x14 + movl 156(%esp),%edi + # v += w + add %ebx,%edi + # p ^= x1 + xorl 104(%esp),%eax + # t <<<= 7 + rol $7,%edx + # t ^= x11 + xorl 144(%esp),%edx + # r <<<= 7 + rol $7,%esi + # r ^= x6 + xorl 124(%esp),%esi + # v <<<= 7 + rol $7,%edi + # v ^= x12 + xorl 148(%esp),%edi + # x1 = p + movl %eax,104(%esp) + # x11 = t + movl %edx,144(%esp) + # p += x0 + addl 100(%esp),%eax + # x6 = r + movl %esi,124(%esp) + # t += x10 + addl 140(%esp),%edx + # x12 = v + movl %edi,148(%esp) + # p <<<= 9 + rol $9,%eax + # p ^= x2 + xorl 108(%esp),%eax + # t <<<= 9 + rol $9,%edx + # t ^= x8 + xorl 132(%esp),%edx + # s += r + add %esi,%ecx + # s <<<= 9 + rol $9,%ecx + # s ^= x7 + xorl 128(%esp),%ecx + # w += v + add %edi,%ebx + # w <<<= 9 + rol $9,%ebx + # w ^= x13 + xorl 152(%esp),%ebx + # x2 = p + movl %eax,108(%esp) + # x8 = t + movl %edx,132(%esp) + # p += x1 + addl 104(%esp),%eax + # x7 = s + movl %ecx,128(%esp) + # t += x11 + addl 144(%esp),%edx + # x13 = w + movl %ebx,152(%esp) + # p <<<= 13 + rol $13,%eax + # p ^= x3 + xorl 112(%esp),%eax + # t <<<= 13 + rol $13,%edx + # t ^= x9 + xorl 136(%esp),%edx + # r += s + add %ecx,%esi + # r <<<= 13 + rol $13,%esi + # r ^= x4 + xorl 116(%esp),%esi + # v += w + add %ebx,%edi + # v <<<= 13 + rol $13,%edi + # v ^= x14 + xorl 156(%esp),%edi + # x3 = p + movl %eax,112(%esp) + # x9 = t + movl %edx,136(%esp) + # p += x2 + addl 108(%esp),%eax + # x4 = r + movl %esi,116(%esp) + # t += x8 + addl 132(%esp),%edx + # x14 = v + movl %edi,156(%esp) + # p <<<= 18 + rol $18,%eax + # p ^= x0 + xorl 100(%esp),%eax + # t <<<= 18 + rol $18,%edx + # t ^= x10 + xorl 140(%esp),%edx + # s += r + add %esi,%ecx + # s <<<= 18 + rol $18,%ecx + # s ^= x5 + xorl 120(%esp),%ecx + # w += v + add %edi,%ebx + # w <<<= 18 + rol $18,%ebx + # w ^= x15 + xorl 160(%esp),%ebx + # x0 = p + movl %eax,100(%esp) + # x10 = t + movl %edx,140(%esp) + # p += x12 + addl 148(%esp),%eax + # x5 = s + movl %ecx,120(%esp) + # t += x6 + addl 124(%esp),%edx + # x15 = w + movl %ebx,160(%esp) + # r = x1 + movl 104(%esp),%esi + # r += s + add %ecx,%esi + # v = x11 + movl 144(%esp),%edi + # v += w + add %ebx,%edi + # p <<<= 7 + rol $7,%eax + # p ^= x4 + xorl 116(%esp),%eax + # t <<<= 7 + rol $7,%edx + # t ^= x14 + xorl 156(%esp),%edx + # r <<<= 7 + rol $7,%esi + # r ^= x9 + xorl 136(%esp),%esi + # v <<<= 7 + rol $7,%edi + # v ^= x3 + xorl 112(%esp),%edi + # x4 = p + movl %eax,116(%esp) + # x14 = t + movl %edx,156(%esp) + # p += x0 + addl 100(%esp),%eax + # x9 = r + movl %esi,136(%esp) + # t += x10 + addl 140(%esp),%edx + # x3 = v + movl %edi,112(%esp) + # p <<<= 9 + rol $9,%eax + # p ^= x8 + xorl 132(%esp),%eax + # t <<<= 9 + rol $9,%edx + # t ^= x2 + xorl 108(%esp),%edx + # s += r + add %esi,%ecx + # s <<<= 9 + rol $9,%ecx + # s ^= x13 + xorl 152(%esp),%ecx + # w += v + add %edi,%ebx + # w <<<= 9 + rol $9,%ebx + # w ^= x7 + xorl 128(%esp),%ebx + # x8 = p + movl %eax,132(%esp) + # x2 = t + movl %edx,108(%esp) + # p += x4 + addl 116(%esp),%eax + # x13 = s + movl %ecx,152(%esp) + # t += x14 + addl 156(%esp),%edx + # x7 = w + movl %ebx,128(%esp) + # p <<<= 13 + rol $13,%eax + # p ^= x12 + xorl 148(%esp),%eax + # t <<<= 13 + rol $13,%edx + # t ^= x6 + xorl 124(%esp),%edx + # r += s + add %ecx,%esi + # r <<<= 13 + rol $13,%esi + # r ^= x1 + xorl 104(%esp),%esi + # v += w + add %ebx,%edi + # v <<<= 13 + rol $13,%edi + # v ^= x11 + xorl 144(%esp),%edi + # x12 = p + movl %eax,148(%esp) + # x6 = t + movl %edx,124(%esp) + # p += x8 + addl 132(%esp),%eax + # x1 = r + movl %esi,104(%esp) + # t += x2 + addl 108(%esp),%edx + # x11 = v + movl %edi,144(%esp) + # p <<<= 18 + rol $18,%eax + # p ^= x0 + xorl 100(%esp),%eax + # t <<<= 18 + rol $18,%edx + # t ^= x10 + xorl 140(%esp),%edx + # s += r + add %esi,%ecx + # s <<<= 18 + rol $18,%ecx + # s ^= x5 + xorl 120(%esp),%ecx + # w += v + add %edi,%ebx + # w <<<= 18 + rol $18,%ebx + # w ^= x15 + xorl 160(%esp),%ebx + # x0 = p + movl %eax,100(%esp) + # x10 = t + movl %edx,140(%esp) + # p += x3 + addl 112(%esp),%eax + # p <<<= 7 + rol $7,%eax + # x5 = s + movl %ecx,120(%esp) + # t += x9 + addl 136(%esp),%edx + # x15 = w + movl %ebx,160(%esp) + # r = x4 + movl 116(%esp),%esi + # r += s + add %ecx,%esi + # v = x14 + movl 156(%esp),%edi + # v += w + add %ebx,%edi + # p ^= x1 + xorl 104(%esp),%eax + # t <<<= 7 + rol $7,%edx + # t ^= x11 + xorl 144(%esp),%edx + # r <<<= 7 + rol $7,%esi + # r ^= x6 + xorl 124(%esp),%esi + # v <<<= 7 + rol $7,%edi + # v ^= x12 + xorl 148(%esp),%edi + # x1 = p + movl %eax,104(%esp) + # x11 = t + movl %edx,144(%esp) + # p += x0 + addl 100(%esp),%eax + # x6 = r + movl %esi,124(%esp) + # t += x10 + addl 140(%esp),%edx + # x12 = v + movl %edi,148(%esp) + # p <<<= 9 + rol $9,%eax + # p ^= x2 + xorl 108(%esp),%eax + # t <<<= 9 + rol $9,%edx + # t ^= x8 + xorl 132(%esp),%edx + # s += r + add %esi,%ecx + # s <<<= 9 + rol $9,%ecx + # s ^= x7 + xorl 128(%esp),%ecx + # w += v + add %edi,%ebx + # w <<<= 9 + rol $9,%ebx + # w ^= x13 + xorl 152(%esp),%ebx + # x2 = p + movl %eax,108(%esp) + # x8 = t + movl %edx,132(%esp) + # p += x1 + addl 104(%esp),%eax + # x7 = s + movl %ecx,128(%esp) + # t += x11 + addl 144(%esp),%edx + # x13 = w + movl %ebx,152(%esp) + # p <<<= 13 + rol $13,%eax + # p ^= x3 + xorl 112(%esp),%eax + # t <<<= 13 + rol $13,%edx + # t ^= x9 + xorl 136(%esp),%edx + # r += s + add %ecx,%esi + # r <<<= 13 + rol $13,%esi + # r ^= x4 + xorl 116(%esp),%esi + # v += w + add %ebx,%edi + # v <<<= 13 + rol $13,%edi + # v ^= x14 + xorl 156(%esp),%edi + # x3 = p + movl %eax,112(%esp) + # x9 = t + movl %edx,136(%esp) + # p += x2 + addl 108(%esp),%eax + # x4 = r + movl %esi,116(%esp) + # t += x8 + addl 132(%esp),%edx + # x14 = v + movl %edi,156(%esp) + # p <<<= 18 + rol $18,%eax + # p ^= x0 + xorl 100(%esp),%eax + # t <<<= 18 + rol $18,%edx + # t ^= x10 + xorl 140(%esp),%edx + # s += r + add %esi,%ecx + # s <<<= 18 + rol $18,%ecx + # s ^= x5 + xorl 120(%esp),%ecx + # w += v + add %edi,%ebx + # w <<<= 18 + rol $18,%ebx + # w ^= x15 + xorl 160(%esp),%ebx + # i -= 4 + sub $4,%ebp + # goto mainloop if unsigned > + ja ._mainloop + # x0 = p + movl %eax,100(%esp) + # x5 = s + movl %ecx,120(%esp) + # x10 = t + movl %edx,140(%esp) + # x15 = w + movl %ebx,160(%esp) + # out = out_backup + movl 72(%esp),%edi + # m = m_backup + movl 68(%esp),%esi + # in0 = x0 + movl 100(%esp),%eax + # in1 = x1 + movl 104(%esp),%ecx + # in0 += j0 + addl 164(%esp),%eax + # in1 += j1 + addl 168(%esp),%ecx + # in0 ^= *(uint32 *) (m + 0) + xorl 0(%esi),%eax + # in1 ^= *(uint32 *) (m + 4) + xorl 4(%esi),%ecx + # *(uint32 *) (out + 0) = in0 + movl %eax,0(%edi) + # *(uint32 *) (out + 4) = in1 + movl %ecx,4(%edi) + # in2 = x2 + movl 108(%esp),%eax + # in3 = x3 + movl 112(%esp),%ecx + # in2 += j2 + addl 172(%esp),%eax + # in3 += j3 + addl 176(%esp),%ecx + # in2 ^= *(uint32 *) (m + 8) + xorl 8(%esi),%eax + # in3 ^= *(uint32 *) (m + 12) + xorl 12(%esi),%ecx + # *(uint32 *) (out + 8) = in2 + movl %eax,8(%edi) + # *(uint32 *) (out + 12) = in3 + movl %ecx,12(%edi) + # in4 = x4 + movl 116(%esp),%eax + # in5 = x5 + movl 120(%esp),%ecx + # in4 += j4 + addl 180(%esp),%eax + # in5 += j5 + addl 184(%esp),%ecx + # in4 ^= *(uint32 *) (m + 16) + xorl 16(%esi),%eax + # in5 ^= *(uint32 *) (m + 20) + xorl 20(%esi),%ecx + # *(uint32 *) (out + 16) = in4 + movl %eax,16(%edi) + # *(uint32 *) (out + 20) = in5 + movl %ecx,20(%edi) + # in6 = x6 + movl 124(%esp),%eax + # in7 = x7 + movl 128(%esp),%ecx + # in6 += j6 + addl 188(%esp),%eax + # in7 += j7 + addl 192(%esp),%ecx + # in6 ^= *(uint32 *) (m + 24) + xorl 24(%esi),%eax + # in7 ^= *(uint32 *) (m + 28) + xorl 28(%esi),%ecx + # *(uint32 *) (out + 24) = in6 + movl %eax,24(%edi) + # *(uint32 *) (out + 28) = in7 + movl %ecx,28(%edi) + # in8 = x8 + movl 132(%esp),%eax + # in9 = x9 + movl 136(%esp),%ecx + # in8 += j8 + addl 196(%esp),%eax + # in9 += j9 + addl 200(%esp),%ecx + # in8 ^= *(uint32 *) (m + 32) + xorl 32(%esi),%eax + # in9 ^= *(uint32 *) (m + 36) + xorl 36(%esi),%ecx + # *(uint32 *) (out + 32) = in8 + movl %eax,32(%edi) + # *(uint32 *) (out + 36) = in9 + movl %ecx,36(%edi) + # in10 = x10 + movl 140(%esp),%eax + # in11 = x11 + movl 144(%esp),%ecx + # in10 += j10 + addl 204(%esp),%eax + # in11 += j11 + addl 208(%esp),%ecx + # in10 ^= *(uint32 *) (m + 40) + xorl 40(%esi),%eax + # in11 ^= *(uint32 *) (m + 44) + xorl 44(%esi),%ecx + # *(uint32 *) (out + 40) = in10 + movl %eax,40(%edi) + # *(uint32 *) (out + 44) = in11 + movl %ecx,44(%edi) + # in12 = x12 + movl 148(%esp),%eax + # in13 = x13 + movl 152(%esp),%ecx + # in12 += j12 + addl 212(%esp),%eax + # in13 += j13 + addl 216(%esp),%ecx + # in12 ^= *(uint32 *) (m + 48) + xorl 48(%esi),%eax + # in13 ^= *(uint32 *) (m + 52) + xorl 52(%esi),%ecx + # *(uint32 *) (out + 48) = in12 + movl %eax,48(%edi) + # *(uint32 *) (out + 52) = in13 + movl %ecx,52(%edi) + # in14 = x14 + movl 156(%esp),%eax + # in15 = x15 + movl 160(%esp),%ecx + # in14 += j14 + addl 220(%esp),%eax + # in15 += j15 + addl 224(%esp),%ecx + # in14 ^= *(uint32 *) (m + 56) + xorl 56(%esi),%eax + # in15 ^= *(uint32 *) (m + 60) + xorl 60(%esi),%ecx + # *(uint32 *) (out + 56) = in14 + movl %eax,56(%edi) + # *(uint32 *) (out + 60) = in15 + movl %ecx,60(%edi) + # bytes = bytes_backup + movl 76(%esp),%ebx + # in8 = j8 + movl 196(%esp),%eax + # in9 = j9 + movl 200(%esp),%ecx + # in8 += 1 + add $1,%eax + # in9 += 0 + carry + adc $0,%ecx + # j8 = in8 + movl %eax,196(%esp) + # j9 = in9 + movl %ecx,200(%esp) + # bytes - 64 + cmp $64,%ebx + # goto bytesatleast65 if unsigned> + ja ._bytesatleast65 + # goto bytesatleast64 if unsigned>= + jae ._bytesatleast64 + # m = out + mov %edi,%esi + # out = ctarget + movl 228(%esp),%edi + # i = bytes + mov %ebx,%ecx + # while (i) { *out++ = *m++; --i } + rep movsb +._bytesatleast64: + # x = x_backup + movl 64(%esp),%eax + # in8 = j8 + movl 196(%esp),%ecx + # in9 = j9 + movl 200(%esp),%edx + # *(uint32 *) (x + 32) = in8 + movl %ecx,32(%eax) + # *(uint32 *) (x + 36) = in9 + movl %edx,36(%eax) +._done: + # eax = eax_stack + movl 80(%esp),%eax + # ebx = ebx_stack + movl 84(%esp),%ebx + # esi = esi_stack + movl 88(%esp),%esi + # edi = edi_stack + movl 92(%esp),%edi + # ebp = ebp_stack + movl 96(%esp),%ebp + # leave + add %eax,%esp + ret +._bytesatleast65: + # bytes -= 64 + sub $64,%ebx + # out += 64 + add $64,%edi + # m += 64 + add $64,%esi + # goto bytesatleast1 + jmp ._bytesatleast1 +# enter ECRYPT_keysetup +.text +.p2align 5 +.globl ECRYPT_keysetup +ECRYPT_keysetup: + mov %esp,%eax + and $31,%eax + add $256,%eax + sub %eax,%esp + # eax_stack = eax + movl %eax,64(%esp) + # ebx_stack = ebx + movl %ebx,68(%esp) + # esi_stack = esi + movl %esi,72(%esp) + # edi_stack = edi + movl %edi,76(%esp) + # ebp_stack = ebp + movl %ebp,80(%esp) + # k = arg2 + movl 8(%esp,%eax),%ecx + # kbits = arg3 + movl 12(%esp,%eax),%edx + # x = arg1 + movl 4(%esp,%eax),%eax + # in1 = *(uint32 *) (k + 0) + movl 0(%ecx),%ebx + # in2 = *(uint32 *) (k + 4) + movl 4(%ecx),%esi + # in3 = *(uint32 *) (k + 8) + movl 8(%ecx),%edi + # in4 = *(uint32 *) (k + 12) + movl 12(%ecx),%ebp + # *(uint32 *) (x + 4) = in1 + movl %ebx,4(%eax) + # *(uint32 *) (x + 8) = in2 + movl %esi,8(%eax) + # *(uint32 *) (x + 12) = in3 + movl %edi,12(%eax) + # *(uint32 *) (x + 16) = in4 + movl %ebp,16(%eax) + # kbits - 256 + cmp $256,%edx + # goto kbits128 if unsigned< + jb ._kbits128 +._kbits256: + # in11 = *(uint32 *) (k + 16) + movl 16(%ecx),%edx + # in12 = *(uint32 *) (k + 20) + movl 20(%ecx),%ebx + # in13 = *(uint32 *) (k + 24) + movl 24(%ecx),%esi + # in14 = *(uint32 *) (k + 28) + movl 28(%ecx),%ecx + # *(uint32 *) (x + 44) = in11 + movl %edx,44(%eax) + # *(uint32 *) (x + 48) = in12 + movl %ebx,48(%eax) + # *(uint32 *) (x + 52) = in13 + movl %esi,52(%eax) + # *(uint32 *) (x + 56) = in14 + movl %ecx,56(%eax) + # in0 = 1634760805 + mov $1634760805,%ecx + # in5 = 857760878 + mov $857760878,%edx + # in10 = 2036477234 + mov $2036477234,%ebx + # in15 = 1797285236 + mov $1797285236,%esi + # *(uint32 *) (x + 0) = in0 + movl %ecx,0(%eax) + # *(uint32 *) (x + 20) = in5 + movl %edx,20(%eax) + # *(uint32 *) (x + 40) = in10 + movl %ebx,40(%eax) + # *(uint32 *) (x + 60) = in15 + movl %esi,60(%eax) + # goto keysetupdone + jmp ._keysetupdone +._kbits128: + # in11 = *(uint32 *) (k + 0) + movl 0(%ecx),%edx + # in12 = *(uint32 *) (k + 4) + movl 4(%ecx),%ebx + # in13 = *(uint32 *) (k + 8) + movl 8(%ecx),%esi + # in14 = *(uint32 *) (k + 12) + movl 12(%ecx),%ecx + # *(uint32 *) (x + 44) = in11 + movl %edx,44(%eax) + # *(uint32 *) (x + 48) = in12 + movl %ebx,48(%eax) + # *(uint32 *) (x + 52) = in13 + movl %esi,52(%eax) + # *(uint32 *) (x + 56) = in14 + movl %ecx,56(%eax) + # in0 = 1634760805 + mov $1634760805,%ecx + # in5 = 824206446 + mov $824206446,%edx + # in10 = 2036477238 + mov $2036477238,%ebx + # in15 = 1797285236 + mov $1797285236,%esi + # *(uint32 *) (x + 0) = in0 + movl %ecx,0(%eax) + # *(uint32 *) (x + 20) = in5 + movl %edx,20(%eax) + # *(uint32 *) (x + 40) = in10 + movl %ebx,40(%eax) + # *(uint32 *) (x + 60) = in15 + movl %esi,60(%eax) +._keysetupdone: + # eax = eax_stack + movl 64(%esp),%eax + # ebx = ebx_stack + movl 68(%esp),%ebx + # esi = esi_stack + movl 72(%esp),%esi + # edi = edi_stack + movl 76(%esp),%edi + # ebp = ebp_stack + movl 80(%esp),%ebp + # leave + add %eax,%esp + ret +# enter ECRYPT_ivsetup +.text +.p2align 5 +.globl ECRYPT_ivsetup +ECRYPT_ivsetup: + mov %esp,%eax + and $31,%eax + add $256,%eax + sub %eax,%esp + # eax_stack = eax + movl %eax,64(%esp) + # ebx_stack = ebx + movl %ebx,68(%esp) + # esi_stack = esi + movl %esi,72(%esp) + # edi_stack = edi + movl %edi,76(%esp) + # ebp_stack = ebp + movl %ebp,80(%esp) + # iv = arg2 + movl 8(%esp,%eax),%ecx + # x = arg1 + movl 4(%esp,%eax),%eax + # in6 = *(uint32 *) (iv + 0) + movl 0(%ecx),%edx + # in7 = *(uint32 *) (iv + 4) + movl 4(%ecx),%ecx + # in8 = 0 + mov $0,%ebx + # in9 = 0 + mov $0,%esi + # *(uint32 *) (x + 24) = in6 + movl %edx,24(%eax) + # *(uint32 *) (x + 28) = in7 + movl %ecx,28(%eax) + # *(uint32 *) (x + 32) = in8 + movl %ebx,32(%eax) + # *(uint32 *) (x + 36) = in9 + movl %esi,36(%eax) + # eax = eax_stack + movl 64(%esp),%eax + # ebx = ebx_stack + movl 68(%esp),%ebx + # esi = esi_stack + movl 72(%esp),%esi + # edi = edi_stack + movl 76(%esp),%edi + # ebp = ebp_stack + movl 80(%esp),%ebp + # leave + add %eax,%esp + ret diff --git a/arch/x86/crypto/salsa20_glue.c b/arch/x86/crypto/salsa20_glue.c new file mode 100644 index 000000000000..3be443995ed6 --- /dev/null +++ b/arch/x86/crypto/salsa20_glue.c @@ -0,0 +1,127 @@ +/* + * Glue code for optimized assembly version of Salsa20. + * + * Copyright (c) 2007 Tan Swee Heng + * + * The assembly codes are public domain assembly codes written by Daniel. J. + * Bernstein . The codes are modified to include indentation + * and to remove extraneous comments and functions that are not needed. + * - i586 version, renamed as salsa20-i586-asm_32.S + * available from + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ + +#include +#include +#include + +#define SALSA20_IV_SIZE 8U +#define SALSA20_MIN_KEY_SIZE 16U +#define SALSA20_MAX_KEY_SIZE 32U + +// use the ECRYPT_* function names +#define salsa20_keysetup ECRYPT_keysetup +#define salsa20_ivsetup ECRYPT_ivsetup +#define salsa20_encrypt_bytes ECRYPT_encrypt_bytes + +struct salsa20_ctx +{ + u32 input[16]; +}; + +asmlinkage void salsa20_keysetup(struct salsa20_ctx *ctx, const u8 *k, + u32 keysize, u32 ivsize); +asmlinkage void salsa20_ivsetup(struct salsa20_ctx *ctx, const u8 *iv); +asmlinkage void salsa20_encrypt_bytes(struct salsa20_ctx *ctx, + const u8 *src, u8 *dst, u32 bytes); + +static int setkey(struct crypto_tfm *tfm, const u8 *key, + unsigned int keysize) +{ + struct salsa20_ctx *ctx = crypto_tfm_ctx(tfm); + salsa20_keysetup(ctx, key, keysize*8, SALSA20_IV_SIZE*8); + return 0; +} + +static int encrypt(struct blkcipher_desc *desc, + struct scatterlist *dst, struct scatterlist *src, + unsigned int nbytes) +{ + struct blkcipher_walk walk; + struct crypto_blkcipher *tfm = desc->tfm; + struct salsa20_ctx *ctx = crypto_blkcipher_ctx(tfm); + int err; + + blkcipher_walk_init(&walk, dst, src, nbytes); + err = blkcipher_walk_virt_block(desc, &walk, 64); + + salsa20_ivsetup(ctx, walk.iv); + + if (likely(walk.nbytes == nbytes)) + { + salsa20_encrypt_bytes(ctx, walk.src.virt.addr, + walk.dst.virt.addr, nbytes); + return blkcipher_walk_done(desc, &walk, 0); + } + + while (walk.nbytes >= 64) { + salsa20_encrypt_bytes(ctx, walk.src.virt.addr, + walk.dst.virt.addr, + walk.nbytes - (walk.nbytes % 64)); + err = blkcipher_walk_done(desc, &walk, walk.nbytes % 64); + } + + if (walk.nbytes) { + salsa20_encrypt_bytes(ctx, walk.src.virt.addr, + walk.dst.virt.addr, walk.nbytes); + err = blkcipher_walk_done(desc, &walk, 0); + } + + return err; +} + +static struct crypto_alg alg = { + .cra_name = "salsa20", + .cra_driver_name = "salsa20-asm", + .cra_priority = 200, + .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER, + .cra_type = &crypto_blkcipher_type, + .cra_blocksize = 1, + .cra_ctxsize = sizeof(struct salsa20_ctx), + .cra_alignmask = 3, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(alg.cra_list), + .cra_u = { + .blkcipher = { + .setkey = setkey, + .encrypt = encrypt, + .decrypt = encrypt, + .min_keysize = SALSA20_MIN_KEY_SIZE, + .max_keysize = SALSA20_MAX_KEY_SIZE, + .ivsize = SALSA20_IV_SIZE, + } + } +}; + +static int __init init(void) +{ + return crypto_register_alg(&alg); +} + +static void __exit fini(void) +{ + crypto_unregister_alg(&alg); +} + +module_init(init); +module_exit(fini); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION ("Salsa20 stream cipher algorithm (optimized assembly version)"); +MODULE_ALIAS("salsa20"); +MODULE_ALIAS("salsa20-asm"); diff --git a/crypto/Kconfig b/crypto/Kconfig index 6c086eedc14f..221356b4150c 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -489,6 +489,21 @@ config CRYPTO_SALSA20 The Salsa20 stream cipher algorithm is designed by Daniel J. Bernstein . See +config CRYPTO_SALSA20_586 + tristate "Salsa20 stream cipher algorithm (i586) (EXPERIMENTAL)" + depends on (X86 || UML_X86) && !64BIT + depends on EXPERIMENTAL + select CRYPTO_BLKCIPHER + select CRYPTO_SALSA20 + help + Salsa20 stream cipher algorithm. + + Salsa20 is a stream cipher submitted to eSTREAM, the ECRYPT + Stream Cipher Project. See + + The Salsa20 stream cipher algorithm is designed by Daniel J. + Bernstein . See + config CRYPTO_DEFLATE tristate "Deflate compression algorithm" select CRYPTO_ALGAPI -- cgit v1.2.3-59-g8ed1b From 9a7dafbba47384c330779c75a1546684efaa8c1a Mon Sep 17 00:00:00 2001 From: Tan Swee Heng Date: Tue, 18 Dec 2007 00:04:40 +0800 Subject: [CRYPTO] salsa20: Add x86-64 assembly version This is the x86-64 version of the Salsa20 stream cipher algorithm. The original assembly code came from . It has been reformatted for clarity. Signed-off-by: Tan Swee Heng Signed-off-by: Herbert Xu --- arch/x86/crypto/Makefile | 2 + arch/x86/crypto/salsa20-x86_64-asm_64.S | 920 ++++++++++++++++++++++++++++++++ arch/x86/crypto/salsa20_glue.c | 2 + crypto/Kconfig | 15 + 4 files changed, 939 insertions(+) create mode 100644 arch/x86/crypto/salsa20-x86_64-asm_64.S diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile index 25cc8441046a..09200e12f14d 100644 --- a/arch/x86/crypto/Makefile +++ b/arch/x86/crypto/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_CRYPTO_SALSA20_586) += salsa20-i586.o obj-$(CONFIG_CRYPTO_AES_X86_64) += aes-x86_64.o obj-$(CONFIG_CRYPTO_TWOFISH_X86_64) += twofish-x86_64.o +obj-$(CONFIG_CRYPTO_SALSA20_X86_64) += salsa20-x86_64.o aes-i586-y := aes-i586-asm_32.o aes_glue.o twofish-i586-y := twofish-i586-asm_32.o twofish_32.o @@ -15,3 +16,4 @@ salsa20-i586-y := salsa20-i586-asm_32.o salsa20_glue.o aes-x86_64-y := aes-x86_64-asm_64.o aes_glue.o twofish-x86_64-y := twofish-x86_64-asm_64.o twofish_64.o +salsa20-x86_64-y := salsa20-x86_64-asm_64.o salsa20_glue.o diff --git a/arch/x86/crypto/salsa20-x86_64-asm_64.S b/arch/x86/crypto/salsa20-x86_64-asm_64.S new file mode 100644 index 000000000000..6214a9b09706 --- /dev/null +++ b/arch/x86/crypto/salsa20-x86_64-asm_64.S @@ -0,0 +1,920 @@ +# enter ECRYPT_encrypt_bytes +.text +.p2align 5 +.globl ECRYPT_encrypt_bytes +ECRYPT_encrypt_bytes: + mov %rsp,%r11 + and $31,%r11 + add $256,%r11 + sub %r11,%rsp + # x = arg1 + mov %rdi,%r8 + # m = arg2 + mov %rsi,%rsi + # out = arg3 + mov %rdx,%rdi + # bytes = arg4 + mov %rcx,%rdx + # unsigned>? bytes - 0 + cmp $0,%rdx + # comment:fp stack unchanged by jump + # goto done if !unsigned> + jbe ._done + # comment:fp stack unchanged by fallthrough +# start: +._start: + # r11_stack = r11 + movq %r11,0(%rsp) + # r12_stack = r12 + movq %r12,8(%rsp) + # r13_stack = r13 + movq %r13,16(%rsp) + # r14_stack = r14 + movq %r14,24(%rsp) + # r15_stack = r15 + movq %r15,32(%rsp) + # rbx_stack = rbx + movq %rbx,40(%rsp) + # rbp_stack = rbp + movq %rbp,48(%rsp) + # in0 = *(uint64 *) (x + 0) + movq 0(%r8),%rcx + # in2 = *(uint64 *) (x + 8) + movq 8(%r8),%r9 + # in4 = *(uint64 *) (x + 16) + movq 16(%r8),%rax + # in6 = *(uint64 *) (x + 24) + movq 24(%r8),%r10 + # in8 = *(uint64 *) (x + 32) + movq 32(%r8),%r11 + # in10 = *(uint64 *) (x + 40) + movq 40(%r8),%r12 + # in12 = *(uint64 *) (x + 48) + movq 48(%r8),%r13 + # in14 = *(uint64 *) (x + 56) + movq 56(%r8),%r14 + # j0 = in0 + movq %rcx,56(%rsp) + # j2 = in2 + movq %r9,64(%rsp) + # j4 = in4 + movq %rax,72(%rsp) + # j6 = in6 + movq %r10,80(%rsp) + # j8 = in8 + movq %r11,88(%rsp) + # j10 = in10 + movq %r12,96(%rsp) + # j12 = in12 + movq %r13,104(%rsp) + # j14 = in14 + movq %r14,112(%rsp) + # x_backup = x + movq %r8,120(%rsp) +# bytesatleast1: +._bytesatleast1: + # unsigned>= 32 + shr $32,%rdi + # x3 = j2 + movq 64(%rsp),%rsi + # x2 = x3 + mov %rsi,%rcx + # (uint64) x3 >>= 32 + shr $32,%rsi + # x5 = j4 + movq 72(%rsp),%r8 + # x4 = x5 + mov %r8,%r9 + # (uint64) x5 >>= 32 + shr $32,%r8 + # x5_stack = x5 + movq %r8,160(%rsp) + # x7 = j6 + movq 80(%rsp),%r8 + # x6 = x7 + mov %r8,%rax + # (uint64) x7 >>= 32 + shr $32,%r8 + # x9 = j8 + movq 88(%rsp),%r10 + # x8 = x9 + mov %r10,%r11 + # (uint64) x9 >>= 32 + shr $32,%r10 + # x11 = j10 + movq 96(%rsp),%r12 + # x10 = x11 + mov %r12,%r13 + # x10_stack = x10 + movq %r13,168(%rsp) + # (uint64) x11 >>= 32 + shr $32,%r12 + # x13 = j12 + movq 104(%rsp),%r13 + # x12 = x13 + mov %r13,%r14 + # (uint64) x13 >>= 32 + shr $32,%r13 + # x15 = j14 + movq 112(%rsp),%r15 + # x14 = x15 + mov %r15,%rbx + # (uint64) x15 >>= 32 + shr $32,%r15 + # x15_stack = x15 + movq %r15,176(%rsp) + # i = 20 + mov $20,%r15 +# mainloop: +._mainloop: + # i_backup = i + movq %r15,184(%rsp) + # x5 = x5_stack + movq 160(%rsp),%r15 + # a = x12 + x0 + lea (%r14,%rdx),%rbp + # (uint32) a <<<= 7 + rol $7,%ebp + # x4 ^= a + xor %rbp,%r9 + # b = x1 + x5 + lea (%rdi,%r15),%rbp + # (uint32) b <<<= 7 + rol $7,%ebp + # x9 ^= b + xor %rbp,%r10 + # a = x0 + x4 + lea (%rdx,%r9),%rbp + # (uint32) a <<<= 9 + rol $9,%ebp + # x8 ^= a + xor %rbp,%r11 + # b = x5 + x9 + lea (%r15,%r10),%rbp + # (uint32) b <<<= 9 + rol $9,%ebp + # x13 ^= b + xor %rbp,%r13 + # a = x4 + x8 + lea (%r9,%r11),%rbp + # (uint32) a <<<= 13 + rol $13,%ebp + # x12 ^= a + xor %rbp,%r14 + # b = x9 + x13 + lea (%r10,%r13),%rbp + # (uint32) b <<<= 13 + rol $13,%ebp + # x1 ^= b + xor %rbp,%rdi + # a = x8 + x12 + lea (%r11,%r14),%rbp + # (uint32) a <<<= 18 + rol $18,%ebp + # x0 ^= a + xor %rbp,%rdx + # b = x13 + x1 + lea (%r13,%rdi),%rbp + # (uint32) b <<<= 18 + rol $18,%ebp + # x5 ^= b + xor %rbp,%r15 + # x10 = x10_stack + movq 168(%rsp),%rbp + # x5_stack = x5 + movq %r15,160(%rsp) + # c = x6 + x10 + lea (%rax,%rbp),%r15 + # (uint32) c <<<= 7 + rol $7,%r15d + # x14 ^= c + xor %r15,%rbx + # c = x10 + x14 + lea (%rbp,%rbx),%r15 + # (uint32) c <<<= 9 + rol $9,%r15d + # x2 ^= c + xor %r15,%rcx + # c = x14 + x2 + lea (%rbx,%rcx),%r15 + # (uint32) c <<<= 13 + rol $13,%r15d + # x6 ^= c + xor %r15,%rax + # c = x2 + x6 + lea (%rcx,%rax),%r15 + # (uint32) c <<<= 18 + rol $18,%r15d + # x10 ^= c + xor %r15,%rbp + # x15 = x15_stack + movq 176(%rsp),%r15 + # x10_stack = x10 + movq %rbp,168(%rsp) + # d = x11 + x15 + lea (%r12,%r15),%rbp + # (uint32) d <<<= 7 + rol $7,%ebp + # x3 ^= d + xor %rbp,%rsi + # d = x15 + x3 + lea (%r15,%rsi),%rbp + # (uint32) d <<<= 9 + rol $9,%ebp + # x7 ^= d + xor %rbp,%r8 + # d = x3 + x7 + lea (%rsi,%r8),%rbp + # (uint32) d <<<= 13 + rol $13,%ebp + # x11 ^= d + xor %rbp,%r12 + # d = x7 + x11 + lea (%r8,%r12),%rbp + # (uint32) d <<<= 18 + rol $18,%ebp + # x15 ^= d + xor %rbp,%r15 + # x15_stack = x15 + movq %r15,176(%rsp) + # x5 = x5_stack + movq 160(%rsp),%r15 + # a = x3 + x0 + lea (%rsi,%rdx),%rbp + # (uint32) a <<<= 7 + rol $7,%ebp + # x1 ^= a + xor %rbp,%rdi + # b = x4 + x5 + lea (%r9,%r15),%rbp + # (uint32) b <<<= 7 + rol $7,%ebp + # x6 ^= b + xor %rbp,%rax + # a = x0 + x1 + lea (%rdx,%rdi),%rbp + # (uint32) a <<<= 9 + rol $9,%ebp + # x2 ^= a + xor %rbp,%rcx + # b = x5 + x6 + lea (%r15,%rax),%rbp + # (uint32) b <<<= 9 + rol $9,%ebp + # x7 ^= b + xor %rbp,%r8 + # a = x1 + x2 + lea (%rdi,%rcx),%rbp + # (uint32) a <<<= 13 + rol $13,%ebp + # x3 ^= a + xor %rbp,%rsi + # b = x6 + x7 + lea (%rax,%r8),%rbp + # (uint32) b <<<= 13 + rol $13,%ebp + # x4 ^= b + xor %rbp,%r9 + # a = x2 + x3 + lea (%rcx,%rsi),%rbp + # (uint32) a <<<= 18 + rol $18,%ebp + # x0 ^= a + xor %rbp,%rdx + # b = x7 + x4 + lea (%r8,%r9),%rbp + # (uint32) b <<<= 18 + rol $18,%ebp + # x5 ^= b + xor %rbp,%r15 + # x10 = x10_stack + movq 168(%rsp),%rbp + # x5_stack = x5 + movq %r15,160(%rsp) + # c = x9 + x10 + lea (%r10,%rbp),%r15 + # (uint32) c <<<= 7 + rol $7,%r15d + # x11 ^= c + xor %r15,%r12 + # c = x10 + x11 + lea (%rbp,%r12),%r15 + # (uint32) c <<<= 9 + rol $9,%r15d + # x8 ^= c + xor %r15,%r11 + # c = x11 + x8 + lea (%r12,%r11),%r15 + # (uint32) c <<<= 13 + rol $13,%r15d + # x9 ^= c + xor %r15,%r10 + # c = x8 + x9 + lea (%r11,%r10),%r15 + # (uint32) c <<<= 18 + rol $18,%r15d + # x10 ^= c + xor %r15,%rbp + # x15 = x15_stack + movq 176(%rsp),%r15 + # x10_stack = x10 + movq %rbp,168(%rsp) + # d = x14 + x15 + lea (%rbx,%r15),%rbp + # (uint32) d <<<= 7 + rol $7,%ebp + # x12 ^= d + xor %rbp,%r14 + # d = x15 + x12 + lea (%r15,%r14),%rbp + # (uint32) d <<<= 9 + rol $9,%ebp + # x13 ^= d + xor %rbp,%r13 + # d = x12 + x13 + lea (%r14,%r13),%rbp + # (uint32) d <<<= 13 + rol $13,%ebp + # x14 ^= d + xor %rbp,%rbx + # d = x13 + x14 + lea (%r13,%rbx),%rbp + # (uint32) d <<<= 18 + rol $18,%ebp + # x15 ^= d + xor %rbp,%r15 + # x15_stack = x15 + movq %r15,176(%rsp) + # x5 = x5_stack + movq 160(%rsp),%r15 + # a = x12 + x0 + lea (%r14,%rdx),%rbp + # (uint32) a <<<= 7 + rol $7,%ebp + # x4 ^= a + xor %rbp,%r9 + # b = x1 + x5 + lea (%rdi,%r15),%rbp + # (uint32) b <<<= 7 + rol $7,%ebp + # x9 ^= b + xor %rbp,%r10 + # a = x0 + x4 + lea (%rdx,%r9),%rbp + # (uint32) a <<<= 9 + rol $9,%ebp + # x8 ^= a + xor %rbp,%r11 + # b = x5 + x9 + lea (%r15,%r10),%rbp + # (uint32) b <<<= 9 + rol $9,%ebp + # x13 ^= b + xor %rbp,%r13 + # a = x4 + x8 + lea (%r9,%r11),%rbp + # (uint32) a <<<= 13 + rol $13,%ebp + # x12 ^= a + xor %rbp,%r14 + # b = x9 + x13 + lea (%r10,%r13),%rbp + # (uint32) b <<<= 13 + rol $13,%ebp + # x1 ^= b + xor %rbp,%rdi + # a = x8 + x12 + lea (%r11,%r14),%rbp + # (uint32) a <<<= 18 + rol $18,%ebp + # x0 ^= a + xor %rbp,%rdx + # b = x13 + x1 + lea (%r13,%rdi),%rbp + # (uint32) b <<<= 18 + rol $18,%ebp + # x5 ^= b + xor %rbp,%r15 + # x10 = x10_stack + movq 168(%rsp),%rbp + # x5_stack = x5 + movq %r15,160(%rsp) + # c = x6 + x10 + lea (%rax,%rbp),%r15 + # (uint32) c <<<= 7 + rol $7,%r15d + # x14 ^= c + xor %r15,%rbx + # c = x10 + x14 + lea (%rbp,%rbx),%r15 + # (uint32) c <<<= 9 + rol $9,%r15d + # x2 ^= c + xor %r15,%rcx + # c = x14 + x2 + lea (%rbx,%rcx),%r15 + # (uint32) c <<<= 13 + rol $13,%r15d + # x6 ^= c + xor %r15,%rax + # c = x2 + x6 + lea (%rcx,%rax),%r15 + # (uint32) c <<<= 18 + rol $18,%r15d + # x10 ^= c + xor %r15,%rbp + # x15 = x15_stack + movq 176(%rsp),%r15 + # x10_stack = x10 + movq %rbp,168(%rsp) + # d = x11 + x15 + lea (%r12,%r15),%rbp + # (uint32) d <<<= 7 + rol $7,%ebp + # x3 ^= d + xor %rbp,%rsi + # d = x15 + x3 + lea (%r15,%rsi),%rbp + # (uint32) d <<<= 9 + rol $9,%ebp + # x7 ^= d + xor %rbp,%r8 + # d = x3 + x7 + lea (%rsi,%r8),%rbp + # (uint32) d <<<= 13 + rol $13,%ebp + # x11 ^= d + xor %rbp,%r12 + # d = x7 + x11 + lea (%r8,%r12),%rbp + # (uint32) d <<<= 18 + rol $18,%ebp + # x15 ^= d + xor %rbp,%r15 + # x15_stack = x15 + movq %r15,176(%rsp) + # x5 = x5_stack + movq 160(%rsp),%r15 + # a = x3 + x0 + lea (%rsi,%rdx),%rbp + # (uint32) a <<<= 7 + rol $7,%ebp + # x1 ^= a + xor %rbp,%rdi + # b = x4 + x5 + lea (%r9,%r15),%rbp + # (uint32) b <<<= 7 + rol $7,%ebp + # x6 ^= b + xor %rbp,%rax + # a = x0 + x1 + lea (%rdx,%rdi),%rbp + # (uint32) a <<<= 9 + rol $9,%ebp + # x2 ^= a + xor %rbp,%rcx + # b = x5 + x6 + lea (%r15,%rax),%rbp + # (uint32) b <<<= 9 + rol $9,%ebp + # x7 ^= b + xor %rbp,%r8 + # a = x1 + x2 + lea (%rdi,%rcx),%rbp + # (uint32) a <<<= 13 + rol $13,%ebp + # x3 ^= a + xor %rbp,%rsi + # b = x6 + x7 + lea (%rax,%r8),%rbp + # (uint32) b <<<= 13 + rol $13,%ebp + # x4 ^= b + xor %rbp,%r9 + # a = x2 + x3 + lea (%rcx,%rsi),%rbp + # (uint32) a <<<= 18 + rol $18,%ebp + # x0 ^= a + xor %rbp,%rdx + # b = x7 + x4 + lea (%r8,%r9),%rbp + # (uint32) b <<<= 18 + rol $18,%ebp + # x5 ^= b + xor %rbp,%r15 + # x10 = x10_stack + movq 168(%rsp),%rbp + # x5_stack = x5 + movq %r15,160(%rsp) + # c = x9 + x10 + lea (%r10,%rbp),%r15 + # (uint32) c <<<= 7 + rol $7,%r15d + # x11 ^= c + xor %r15,%r12 + # c = x10 + x11 + lea (%rbp,%r12),%r15 + # (uint32) c <<<= 9 + rol $9,%r15d + # x8 ^= c + xor %r15,%r11 + # c = x11 + x8 + lea (%r12,%r11),%r15 + # (uint32) c <<<= 13 + rol $13,%r15d + # x9 ^= c + xor %r15,%r10 + # c = x8 + x9 + lea (%r11,%r10),%r15 + # (uint32) c <<<= 18 + rol $18,%r15d + # x10 ^= c + xor %r15,%rbp + # x15 = x15_stack + movq 176(%rsp),%r15 + # x10_stack = x10 + movq %rbp,168(%rsp) + # d = x14 + x15 + lea (%rbx,%r15),%rbp + # (uint32) d <<<= 7 + rol $7,%ebp + # x12 ^= d + xor %rbp,%r14 + # d = x15 + x12 + lea (%r15,%r14),%rbp + # (uint32) d <<<= 9 + rol $9,%ebp + # x13 ^= d + xor %rbp,%r13 + # d = x12 + x13 + lea (%r14,%r13),%rbp + # (uint32) d <<<= 13 + rol $13,%ebp + # x14 ^= d + xor %rbp,%rbx + # d = x13 + x14 + lea (%r13,%rbx),%rbp + # (uint32) d <<<= 18 + rol $18,%ebp + # x15 ^= d + xor %rbp,%r15 + # x15_stack = x15 + movq %r15,176(%rsp) + # i = i_backup + movq 184(%rsp),%r15 + # unsigned>? i -= 4 + sub $4,%r15 + # comment:fp stack unchanged by jump + # goto mainloop if unsigned> + ja ._mainloop + # (uint32) x2 += j2 + addl 64(%rsp),%ecx + # x3 <<= 32 + shl $32,%rsi + # x3 += j2 + addq 64(%rsp),%rsi + # (uint64) x3 >>= 32 + shr $32,%rsi + # x3 <<= 32 + shl $32,%rsi + # x2 += x3 + add %rsi,%rcx + # (uint32) x6 += j6 + addl 80(%rsp),%eax + # x7 <<= 32 + shl $32,%r8 + # x7 += j6 + addq 80(%rsp),%r8 + # (uint64) x7 >>= 32 + shr $32,%r8 + # x7 <<= 32 + shl $32,%r8 + # x6 += x7 + add %r8,%rax + # (uint32) x8 += j8 + addl 88(%rsp),%r11d + # x9 <<= 32 + shl $32,%r10 + # x9 += j8 + addq 88(%rsp),%r10 + # (uint64) x9 >>= 32 + shr $32,%r10 + # x9 <<= 32 + shl $32,%r10 + # x8 += x9 + add %r10,%r11 + # (uint32) x12 += j12 + addl 104(%rsp),%r14d + # x13 <<= 32 + shl $32,%r13 + # x13 += j12 + addq 104(%rsp),%r13 + # (uint64) x13 >>= 32 + shr $32,%r13 + # x13 <<= 32 + shl $32,%r13 + # x12 += x13 + add %r13,%r14 + # (uint32) x0 += j0 + addl 56(%rsp),%edx + # x1 <<= 32 + shl $32,%rdi + # x1 += j0 + addq 56(%rsp),%rdi + # (uint64) x1 >>= 32 + shr $32,%rdi + # x1 <<= 32 + shl $32,%rdi + # x0 += x1 + add %rdi,%rdx + # x5 = x5_stack + movq 160(%rsp),%rdi + # (uint32) x4 += j4 + addl 72(%rsp),%r9d + # x5 <<= 32 + shl $32,%rdi + # x5 += j4 + addq 72(%rsp),%rdi + # (uint64) x5 >>= 32 + shr $32,%rdi + # x5 <<= 32 + shl $32,%rdi + # x4 += x5 + add %rdi,%r9 + # x10 = x10_stack + movq 168(%rsp),%r8 + # (uint32) x10 += j10 + addl 96(%rsp),%r8d + # x11 <<= 32 + shl $32,%r12 + # x11 += j10 + addq 96(%rsp),%r12 + # (uint64) x11 >>= 32 + shr $32,%r12 + # x11 <<= 32 + shl $32,%r12 + # x10 += x11 + add %r12,%r8 + # x15 = x15_stack + movq 176(%rsp),%rdi + # (uint32) x14 += j14 + addl 112(%rsp),%ebx + # x15 <<= 32 + shl $32,%rdi + # x15 += j14 + addq 112(%rsp),%rdi + # (uint64) x15 >>= 32 + shr $32,%rdi + # x15 <<= 32 + shl $32,%rdi + # x14 += x15 + add %rdi,%rbx + # out = out_backup + movq 136(%rsp),%rdi + # m = m_backup + movq 144(%rsp),%rsi + # x0 ^= *(uint64 *) (m + 0) + xorq 0(%rsi),%rdx + # *(uint64 *) (out + 0) = x0 + movq %rdx,0(%rdi) + # x2 ^= *(uint64 *) (m + 8) + xorq 8(%rsi),%rcx + # *(uint64 *) (out + 8) = x2 + movq %rcx,8(%rdi) + # x4 ^= *(uint64 *) (m + 16) + xorq 16(%rsi),%r9 + # *(uint64 *) (out + 16) = x4 + movq %r9,16(%rdi) + # x6 ^= *(uint64 *) (m + 24) + xorq 24(%rsi),%rax + # *(uint64 *) (out + 24) = x6 + movq %rax,24(%rdi) + # x8 ^= *(uint64 *) (m + 32) + xorq 32(%rsi),%r11 + # *(uint64 *) (out + 32) = x8 + movq %r11,32(%rdi) + # x10 ^= *(uint64 *) (m + 40) + xorq 40(%rsi),%r8 + # *(uint64 *) (out + 40) = x10 + movq %r8,40(%rdi) + # x12 ^= *(uint64 *) (m + 48) + xorq 48(%rsi),%r14 + # *(uint64 *) (out + 48) = x12 + movq %r14,48(%rdi) + # x14 ^= *(uint64 *) (m + 56) + xorq 56(%rsi),%rbx + # *(uint64 *) (out + 56) = x14 + movq %rbx,56(%rdi) + # bytes = bytes_backup + movq 152(%rsp),%rdx + # in8 = j8 + movq 88(%rsp),%rcx + # in8 += 1 + add $1,%rcx + # j8 = in8 + movq %rcx,88(%rsp) + # unsigned>? unsigned + ja ._bytesatleast65 + # comment:fp stack unchanged by jump + # goto bytesatleast64 if !unsigned< + jae ._bytesatleast64 + # m = out + mov %rdi,%rsi + # out = ctarget + movq 128(%rsp),%rdi + # i = bytes + mov %rdx,%rcx + # while (i) { *out++ = *m++; --i } + rep movsb + # comment:fp stack unchanged by fallthrough +# bytesatleast64: +._bytesatleast64: + # x = x_backup + movq 120(%rsp),%rdi + # in8 = j8 + movq 88(%rsp),%rsi + # *(uint64 *) (x + 32) = in8 + movq %rsi,32(%rdi) + # r11 = r11_stack + movq 0(%rsp),%r11 + # r12 = r12_stack + movq 8(%rsp),%r12 + # r13 = r13_stack + movq 16(%rsp),%r13 + # r14 = r14_stack + movq 24(%rsp),%r14 + # r15 = r15_stack + movq 32(%rsp),%r15 + # rbx = rbx_stack + movq 40(%rsp),%rbx + # rbp = rbp_stack + movq 48(%rsp),%rbp + # comment:fp stack unchanged by fallthrough +# done: +._done: + # leave + add %r11,%rsp + mov %rdi,%rax + mov %rsi,%rdx + ret +# bytesatleast65: +._bytesatleast65: + # bytes -= 64 + sub $64,%rdx + # out += 64 + add $64,%rdi + # m += 64 + add $64,%rsi + # comment:fp stack unchanged by jump + # goto bytesatleast1 + jmp ._bytesatleast1 +# enter ECRYPT_keysetup +.text +.p2align 5 +.globl ECRYPT_keysetup +ECRYPT_keysetup: + mov %rsp,%r11 + and $31,%r11 + add $256,%r11 + sub %r11,%rsp + # k = arg2 + mov %rsi,%rsi + # kbits = arg3 + mov %rdx,%rdx + # x = arg1 + mov %rdi,%rdi + # in0 = *(uint64 *) (k + 0) + movq 0(%rsi),%r8 + # in2 = *(uint64 *) (k + 8) + movq 8(%rsi),%r9 + # *(uint64 *) (x + 4) = in0 + movq %r8,4(%rdi) + # *(uint64 *) (x + 12) = in2 + movq %r9,12(%rdi) + # unsigned + * - x86-64 version, renamed as salsa20-x86_64-asm_64.S + * available from * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free diff --git a/crypto/Kconfig b/crypto/Kconfig index 221356b4150c..b0481f7b002a 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -504,6 +504,21 @@ config CRYPTO_SALSA20_586 The Salsa20 stream cipher algorithm is designed by Daniel J. Bernstein . See +config CRYPTO_SALSA20_X86_64 + tristate "Salsa20 stream cipher algorithm (x86_64) (EXPERIMENTAL)" + depends on (X86 || UML_X86) && 64BIT + depends on EXPERIMENTAL + select CRYPTO_BLKCIPHER + select CRYPTO_SALSA20 + help + Salsa20 stream cipher algorithm. + + Salsa20 is a stream cipher submitted to eSTREAM, the ECRYPT + Stream Cipher Project. See + + The Salsa20 stream cipher algorithm is designed by Daniel J. + Bernstein . See + config CRYPTO_DEFLATE tristate "Deflate compression algorithm" select CRYPTO_ALGAPI -- cgit v1.2.3-59-g8ed1b From d1cda4e39638e906f022c8ce56f566b617e1f77e Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Tue, 18 Dec 2007 00:08:27 +0800 Subject: [CRYPTO] tcrypt: Add select of AEAD ERROR: "crypto_aead_setauthsize" [crypto/tcrypt.ko] undefined! ERROR: "crypto_alloc_aead" [crypto/tcrypt.ko] undefined! Signed-off-by: Sebastian Siewior Signed-off-by: Herbert Xu --- crypto/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/crypto/Kconfig b/crypto/Kconfig index b0481f7b002a..93ad53a84e95 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -568,6 +568,7 @@ config CRYPTO_TEST tristate "Testing module" depends on m select CRYPTO_ALGAPI + select CRYPTO_AEAD help Quick & dirty crypto test module. -- cgit v1.2.3-59-g8ed1b From 214dc54f6f1b71bcd895ef272c108c67ef046200 Mon Sep 17 00:00:00 2001 From: Tan Swee Heng Date: Tue, 18 Dec 2007 22:45:35 +0800 Subject: [CRYPTO] salsa20-asm: Remove unnecessary dependency on CRYPTO_SALSA20 Signed-off-by: Tan Swee Heng Signed-off-by: Herbert Xu --- crypto/Kconfig | 2 -- 1 file changed, 2 deletions(-) diff --git a/crypto/Kconfig b/crypto/Kconfig index 93ad53a84e95..c3166a1a5bb6 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -494,7 +494,6 @@ config CRYPTO_SALSA20_586 depends on (X86 || UML_X86) && !64BIT depends on EXPERIMENTAL select CRYPTO_BLKCIPHER - select CRYPTO_SALSA20 help Salsa20 stream cipher algorithm. @@ -509,7 +508,6 @@ config CRYPTO_SALSA20_X86_64 depends on (X86 || UML_X86) && 64BIT depends on EXPERIMENTAL select CRYPTO_BLKCIPHER - select CRYPTO_SALSA20 help Salsa20 stream cipher algorithm. -- cgit v1.2.3-59-g8ed1b From 1c5dfe6a959b79215c0f73d793169a7d5755900e Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Mon, 24 Dec 2007 08:54:24 +0800 Subject: [CRYPTO] api: Include sched.h for cond_resched in scatterwalk.h As Andrew Morton correctly points out, we need to explicitly include sched.h as we use the function cond_resched in crypto/scatterwalk.h. Signed-off-by: Herbert Xu --- include/crypto/scatterwalk.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/crypto/scatterwalk.h b/include/crypto/scatterwalk.h index bd62431c33bd..224658b8d806 100644 --- a/include/crypto/scatterwalk.h +++ b/include/crypto/scatterwalk.h @@ -23,6 +23,7 @@ #include #include #include +#include static inline enum km_type crypto_kmap_type(int out) { -- cgit v1.2.3-59-g8ed1b From 866cd902e864e9d0e31299efa9d61fc9a9bec315 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 27 Dec 2007 00:04:44 +1100 Subject: [CRYPTO] padlock: Only reset the key once for each CBC and ECB operation Currently we reset the key for each segment fed to the xcrypt instructions. This patch optimises this for CBC and ECB so that we only do this once for each encrypt/decrypt operation. Signed-off-by: Herbert Xu --- drivers/crypto/padlock-aes.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c index c33334ac987e..2f3ad3f7dfea 100644 --- a/drivers/crypto/padlock-aes.c +++ b/drivers/crypto/padlock-aes.c @@ -417,6 +417,11 @@ static int aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, /* ====== Encryption/decryption routines ====== */ /* These are the real call to PadLock. */ +static inline void padlock_reset_key(void) +{ + asm volatile ("pushfl; popfl"); +} + static inline void padlock_xcrypt(const u8 *input, u8 *output, void *key, void *control_word) { @@ -437,8 +442,6 @@ static void aes_crypt_copy(const u8 *in, u8 *out, u32 *key, struct cword *cword) static inline void aes_crypt(const u8 *in, u8 *out, u32 *key, struct cword *cword) { - asm volatile ("pushfl; popfl"); - /* padlock_xcrypt requires at least two blocks of data. */ if (unlikely(!(((unsigned long)in ^ (PAGE_SIZE - AES_BLOCK_SIZE)) & (PAGE_SIZE - 1)))) { @@ -457,7 +460,6 @@ static inline void padlock_xcrypt_ecb(const u8 *input, u8 *output, void *key, return; } - asm volatile ("pushfl; popfl"); /* enforce key reload. */ asm volatile ("test $1, %%cl;" "je 1f;" "lea -1(%%ecx), %%eax;" @@ -474,8 +476,6 @@ static inline void padlock_xcrypt_ecb(const u8 *input, u8 *output, void *key, static inline u8 *padlock_xcrypt_cbc(const u8 *input, u8 *output, void *key, u8 *iv, void *control_word, u32 count) { - /* Enforce key reload. */ - asm volatile ("pushfl; popfl"); /* rep xcryptcbc */ asm volatile (".byte 0xf3,0x0f,0xa7,0xd0" : "+S" (input), "+D" (output), "+a" (iv) @@ -486,12 +486,14 @@ static inline u8 *padlock_xcrypt_cbc(const u8 *input, u8 *output, void *key, static void aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) { struct aes_ctx *ctx = aes_ctx(tfm); + padlock_reset_key(); aes_crypt(in, out, ctx->E, &ctx->cword.encrypt); } static void aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) { struct aes_ctx *ctx = aes_ctx(tfm); + padlock_reset_key(); aes_crypt(in, out, ctx->D, &ctx->cword.decrypt); } @@ -524,6 +526,8 @@ static int ecb_aes_encrypt(struct blkcipher_desc *desc, struct blkcipher_walk walk; int err; + padlock_reset_key(); + blkcipher_walk_init(&walk, dst, src, nbytes); err = blkcipher_walk_virt(desc, &walk); @@ -546,6 +550,8 @@ static int ecb_aes_decrypt(struct blkcipher_desc *desc, struct blkcipher_walk walk; int err; + padlock_reset_key(); + blkcipher_walk_init(&walk, dst, src, nbytes); err = blkcipher_walk_virt(desc, &walk); @@ -590,6 +596,8 @@ static int cbc_aes_encrypt(struct blkcipher_desc *desc, struct blkcipher_walk walk; int err; + padlock_reset_key(); + blkcipher_walk_init(&walk, dst, src, nbytes); err = blkcipher_walk_virt(desc, &walk); @@ -614,6 +622,8 @@ static int cbc_aes_decrypt(struct blkcipher_desc *desc, struct blkcipher_walk walk; int err; + padlock_reset_key(); + blkcipher_walk_init(&walk, dst, src, nbytes); err = blkcipher_walk_virt(desc, &walk); -- cgit v1.2.3-59-g8ed1b From 2a999a3abb2d3885741b09b9d05280db7e757544 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 30 Dec 2007 20:24:11 +1100 Subject: [CRYPTO] tcrypt: Zero axbuf in the right function The axbuf buffer is used by test_aead and therefore should be zeroed there instead of in test_hash. Signed-off-by: Herbert Xu --- crypto/tcrypt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c index 2b52df7bf833..72073ef4a06d 100644 --- a/crypto/tcrypt.c +++ b/crypto/tcrypt.c @@ -172,7 +172,6 @@ static void test_hash(char *algo, struct hash_testvec *template, /* setup the dummy buffer first */ memset(xbuf, 0, XBUFSIZE); - memset(axbuf, 0, XBUFSIZE); j = 0; for (i = 0; i < tcount; i++) { @@ -350,6 +349,7 @@ static void test_aead(char *algo, int enc, struct aead_testvec *template, printk(KERN_INFO "\ntesting %s %s across pages (chunking)\n", algo, e); memset(xbuf, 0, XBUFSIZE); + memset(axbuf, 0, XBUFSIZE); for (i = 0, j = 0; i < tcount; i++) { if (aead_tv[i].np) { -- cgit v1.2.3-59-g8ed1b From 1b87887d6c232becba77835b29a424cf78442b7d Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 1 Jan 2008 15:44:50 +1100 Subject: [CRYPTO] xcbc: Fix algorithm leak when block size check fails When the underlying algorithm has a block size other than 16 we abort without freeing it. In fact, we try to return the algorithm itself as an error! This patch plugs the leak and makes it return -EINVAL instead. Signed-off-by: Herbert Xu --- crypto/xcbc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/crypto/xcbc.c b/crypto/xcbc.c index 789cdeee6b7d..e3d9503a034b 100644 --- a/crypto/xcbc.c +++ b/crypto/xcbc.c @@ -307,7 +307,8 @@ static struct crypto_instance *xcbc_alloc(struct rtattr **tb) case 16: break; default: - return ERR_PTR(PTR_ERR(alg)); + inst = ERR_PTR(-EINVAL); + goto out_put_alg; } inst = crypto_alloc_instance("xcbc", alg); -- cgit v1.2.3-59-g8ed1b From 94765b9e4cba8e3c51c292338db16aa174894d30 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 1 Jan 2008 15:49:17 +1100 Subject: [CRYPTO] xcbc: Remove bogus hash/cipher test When setting the digest size xcbc tests to see if the underlying algorithm is a hash. This is silly because we don't allow it to be a hash and we've specifically requested for a cipher. This patch removes the bogus test. Signed-off-by: Herbert Xu --- crypto/xcbc.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/crypto/xcbc.c b/crypto/xcbc.c index e3d9503a034b..a82959df678c 100644 --- a/crypto/xcbc.c +++ b/crypto/xcbc.c @@ -321,10 +321,7 @@ static struct crypto_instance *xcbc_alloc(struct rtattr **tb) inst->alg.cra_alignmask = alg->cra_alignmask; inst->alg.cra_type = &crypto_hash_type; - inst->alg.cra_hash.digestsize = - (alg->cra_flags & CRYPTO_ALG_TYPE_MASK) == - CRYPTO_ALG_TYPE_HASH ? alg->cra_hash.digestsize : - alg->cra_blocksize; + inst->alg.cra_hash.digestsize = alg->cra_blocksize; inst->alg.cra_ctxsize = sizeof(struct crypto_xcbc_ctx) + ALIGN(inst->alg.cra_blocksize * 3, sizeof(void *)); inst->alg.cra_init = xcbc_init_tfm; -- cgit v1.2.3-59-g8ed1b From 38ed9ab23b8614c9c1553b2961ef2627f3088fd9 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 1 Jan 2008 15:59:28 +1100 Subject: [CRYPTO] tcrypt: Make xcbc available as a standalone test Currently the gcm(aes) tests have to be taken together with all other algorithms. This patch makes it available by itself at number 106. Signed-off-by: Herbert Xu --- crypto/tcrypt.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c index 72073ef4a06d..1ab8c017a011 100644 --- a/crypto/tcrypt.c +++ b/crypto/tcrypt.c @@ -1608,11 +1608,17 @@ static void do_test(void) test_hash("hmac(sha512)", hmac_sha512_tv_template, HMAC_SHA512_TEST_VECTORS); break; + case 105: test_hash("hmac(sha224)", hmac_sha224_tv_template, HMAC_SHA224_TEST_VECTORS); break; + case 106: + test_hash("xcbc(aes)", aes_xcbc128_tv_template, + XCBC_AES_TEST_VECTORS); + break; + case 200: test_cipher_speed("ecb(aes)", ENCRYPT, sec, NULL, 0, aes_speed_template); -- cgit v1.2.3-59-g8ed1b From 6eb7228421c01ba48a6a88a7a5b3e71cfb70d4a9 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 8 Jan 2008 17:16:44 +1100 Subject: [CRYPTO] api: Set default CRYPTO_MINALIGN to unsigned long long Thanks to David Miller for pointing out that the SLAB (or SLOB/SLUB) cache uses the alignment of unsigned long long if the architecture kmalloc/slab alignment macros are not defined. This patch changes the CRYPTO_MINALIGN so that it uses the same default value. Signed-off-by: Herbert Xu --- include/linux/crypto.h | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/include/linux/crypto.h b/include/linux/crypto.h index 0aba10460201..5e02d1b46370 100644 --- a/include/linux/crypto.h +++ b/include/linux/crypto.h @@ -90,13 +90,11 @@ #define CRYPTO_MINALIGN ARCH_KMALLOC_MINALIGN #elif defined(ARCH_SLAB_MINALIGN) #define CRYPTO_MINALIGN ARCH_SLAB_MINALIGN +#else +#define CRYPTO_MINALIGN __alignof__(unsigned long long) #endif -#ifdef CRYPTO_MINALIGN #define CRYPTO_MINALIGN_ATTR __attribute__ ((__aligned__(CRYPTO_MINALIGN))) -#else -#define CRYPTO_MINALIGN_ATTR -#endif struct scatterlist; struct crypto_ablkcipher; -- cgit v1.2.3-59-g8ed1b From e6ccc727f30a02670f6a00df6d548942bc988f43 Mon Sep 17 00:00:00 2001 From: Ilpo Järvinen Date: Tue, 8 Jan 2008 17:20:31 +1100 Subject: [CRYPTO] cast6: inline bloat-- MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Bloat-o-meter shows rather high readings for cast6... crypto/cast6.c: cast6_setkey | -1310 cast6_encrypt | -4567 cast6_decrypt | -4561 3 functions changed, 10438 bytes removed, diff: -10438 crypto/cast6.c: W | +659 Q | +308 QBAR | +316 3 functions changed, 1283 bytes added, diff: +1283 crypto/cast6.o: 6 functions changed, 1283 bytes added, 10438 bytes removed, diff: -9155 Signed-off-by: Ilpo Järvinen Signed-off-by: Herbert Xu --- crypto/cast6.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/crypto/cast6.c b/crypto/cast6.c index 136ab6dfe8c5..5fd9420dc58e 100644 --- a/crypto/cast6.c +++ b/crypto/cast6.c @@ -369,7 +369,7 @@ static const u8 Tr[4][8] = { }; /* forward octave */ -static inline void W(u32 *key, unsigned int i) { +static void W(u32 *key, unsigned int i) { u32 I; key[6] ^= F1(key[7], Tr[i % 4][0], Tm[i][0]); key[5] ^= F2(key[6], Tr[i % 4][1], Tm[i][1]); @@ -428,7 +428,7 @@ static int cast6_setkey(struct crypto_tfm *tfm, const u8 *in_key, } /*forward quad round*/ -static inline void Q (u32 * block, u8 * Kr, u32 * Km) { +static void Q (u32 * block, u8 * Kr, u32 * Km) { u32 I; block[2] ^= F1(block[3], Kr[0], Km[0]); block[1] ^= F2(block[2], Kr[1], Km[1]); @@ -437,7 +437,7 @@ static inline void Q (u32 * block, u8 * Kr, u32 * Km) { } /*reverse quad round*/ -static inline void QBAR (u32 * block, u8 * Kr, u32 * Km) { +static void QBAR (u32 * block, u8 * Kr, u32 * Km) { u32 I; block[3] ^= F1(block[0], Kr[3], Km[3]); block[0] ^= F3(block[1], Kr[2], Km[2]); -- cgit v1.2.3-59-g8ed1b From b966b54654598aebdac9c57f102d769b36d2f68f Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 8 Jan 2008 21:36:34 +1100 Subject: [CRYPTO] hifn_795x: Fixup container_of() usage Signed-off-by: Alexey Dobriyan Signed-off-by: Herbert Xu --- drivers/crypto/hifn_795x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c index 1a197003f1a2..16413e57597c 100644 --- a/drivers/crypto/hifn_795x.c +++ b/drivers/crypto/hifn_795x.c @@ -664,7 +664,7 @@ struct hifn_context atomic_t sg_num; }; -#define crypto_alg_to_hifn(alg) container_of(alg, struct hifn_crypto_alg, alg) +#define crypto_alg_to_hifn(a) container_of(a, struct hifn_crypto_alg, alg) static inline u32 hifn_read_0(struct hifn_device *dev, u32 reg) { -- cgit v1.2.3-59-g8ed1b From 967c9ec4ec6178bee42f4231c49a3d7f77627978 Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Thu, 10 Jan 2008 16:04:25 -0600 Subject: JFS: simplify types to get rid of sparse warning jfs_metapage.c was using uints and unsigned ints inconsistently when regular ints suffice. Signed-off-by: Dave Kleikamp --- fs/jfs/jfs_metapage.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/fs/jfs/jfs_metapage.c b/fs/jfs/jfs_metapage.c index 1dfaae5adf1b..d1e64f2f2fcd 100644 --- a/fs/jfs/jfs_metapage.c +++ b/fs/jfs/jfs_metapage.c @@ -88,7 +88,7 @@ struct meta_anchor { }; #define mp_anchor(page) ((struct meta_anchor *)page_private(page)) -static inline struct metapage *page_to_mp(struct page *page, uint offset) +static inline struct metapage *page_to_mp(struct page *page, int offset) { if (!PagePrivate(page)) return NULL; @@ -153,7 +153,7 @@ static inline void dec_io(struct page *page, void (*handler) (struct page *)) } #else -static inline struct metapage *page_to_mp(struct page *page, uint offset) +static inline struct metapage *page_to_mp(struct page *page, int offset) { return PagePrivate(page) ? (struct metapage *)page_private(page) : NULL; } @@ -249,7 +249,7 @@ static inline void drop_metapage(struct page *page, struct metapage *mp) */ static sector_t metapage_get_blocks(struct inode *inode, sector_t lblock, - unsigned int *len) + int *len) { int rc = 0; int xflag; @@ -352,11 +352,11 @@ static void metapage_write_end_io(struct bio *bio, int err) static int metapage_writepage(struct page *page, struct writeback_control *wbc) { struct bio *bio = NULL; - unsigned int block_offset; /* block offset of mp within page */ + int block_offset; /* block offset of mp within page */ struct inode *inode = page->mapping->host; - unsigned int blocks_per_mp = JFS_SBI(inode->i_sb)->nbperpage; - unsigned int len; - unsigned int xlen; + int blocks_per_mp = JFS_SBI(inode->i_sb)->nbperpage; + int len; + int xlen; struct metapage *mp; int redirty = 0; sector_t lblock; @@ -366,7 +366,7 @@ static int metapage_writepage(struct page *page, struct writeback_control *wbc) sector_t page_start; unsigned long bio_bytes = 0; unsigned long bio_offset = 0; - unsigned int offset; + int offset; page_start = (sector_t)page->index << (PAGE_CACHE_SHIFT - inode->i_blkbits); @@ -428,7 +428,7 @@ static int metapage_writepage(struct page *page, struct writeback_control *wbc) continue; } set_bit(META_io, &mp->flag); - len = min(xlen, (uint) JFS_SBI(inode->i_sb)->nbperpage); + len = min(xlen, (int)JFS_SBI(inode->i_sb)->nbperpage); bio = bio_alloc(GFP_NOFS, 1); bio->bi_bdev = inode->i_sb->s_bdev; @@ -480,13 +480,13 @@ static int metapage_readpage(struct file *fp, struct page *page) { struct inode *inode = page->mapping->host; struct bio *bio = NULL; - unsigned int block_offset; - unsigned int blocks_per_page = PAGE_CACHE_SIZE >> inode->i_blkbits; + int block_offset; + int blocks_per_page = PAGE_CACHE_SIZE >> inode->i_blkbits; sector_t page_start; /* address of page in fs blocks */ sector_t pblock; - unsigned int xlen; + int xlen; unsigned int len; - unsigned int offset; + int offset; BUG_ON(!PageLocked(page)); page_start = (sector_t)page->index << @@ -535,7 +535,7 @@ static int metapage_releasepage(struct page *page, gfp_t gfp_mask) { struct metapage *mp; int ret = 1; - unsigned int offset; + int offset; for (offset = 0; offset < PAGE_CACHE_SIZE; offset += PSIZE) { mp = page_to_mp(page, offset); -- cgit v1.2.3-59-g8ed1b From e6ab15827eec0bc4444421f7ccf0223de321c708 Mon Sep 17 00:00:00 2001 From: Igor Mammedov Date: Fri, 11 Jan 2008 01:49:48 +0000 Subject: [CIFS] DFS support patchset: Added mountdata Also cifs_fs_type was made not static for ussage in dfs code. Signed-off-by: Igor Mammedov Signed-off-by: Steve French --- fs/cifs/cifs_fs_sb.h | 5 ++++- fs/cifs/cifsfs.c | 37 ++++++++++++++++++++++++++++++++++++- fs/cifs/cifsfs.h | 1 + 3 files changed, 41 insertions(+), 2 deletions(-) diff --git a/fs/cifs/cifs_fs_sb.h b/fs/cifs/cifs_fs_sb.h index 34af556cdd8d..8ad2330ba061 100644 --- a/fs/cifs/cifs_fs_sb.h +++ b/fs/cifs/cifs_fs_sb.h @@ -43,6 +43,9 @@ struct cifs_sb_info { mode_t mnt_dir_mode; int mnt_cifs_flags; int prepathlen; - char *prepath; + char *prepath; /* relative path under the share to mount to */ +#ifdef CONFIG_CIFS_DFS_UPCALL + char *mountdata; /* mount options received at mount time */ +#endif }; #endif /* _CIFS_FS_SB_H */ diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 000b4a5d3219..93e107883a61 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -97,6 +97,9 @@ cifs_read_super(struct super_block *sb, void *data, { struct inode *inode; struct cifs_sb_info *cifs_sb; +#ifdef CONFIG_CIFS_DFS_UPCALL + int len; +#endif int rc = 0; /* BB should we make this contingent on mount parm? */ @@ -106,6 +109,25 @@ cifs_read_super(struct super_block *sb, void *data, if (cifs_sb == NULL) return -ENOMEM; +#ifdef CONFIG_CIFS_DFS_UPCALL + /* copy mount params to sb for use in submounts */ + /* BB: should we move this after the mount so we + * do not have to do the copy on failed mounts? + * BB: May be it is better to do simple copy before + * complex operation (mount), and in case of fail + * just exit instead of doing mount and attempting + * undo it if this copy fails?*/ + len = strlen(data); + cifs_sb->mountdata = kzalloc(len + 1, GFP_KERNEL); + if (cifs_sb->mountdata == NULL) { + kfree(sb->s_fs_info); + sb->s_fs_info = NULL; + return -ENOMEM; + } + strncpy(cifs_sb->mountdata, data, len + 1); + cifs_sb->mountdata[len] = '\0'; +#endif + rc = cifs_mount(sb, cifs_sb, data, devname); if (rc) { @@ -155,6 +177,12 @@ out_no_root: out_mount_failed: if (cifs_sb) { +#ifdef CONFIG_CIFS_DFS_UPCALL + if (cifs_sb->mountdata) { + kfree(cifs_sb->mountdata); + cifs_sb->mountdata = NULL; + } +#endif if (cifs_sb->local_nls) unload_nls(cifs_sb->local_nls); kfree(cifs_sb); @@ -178,6 +206,13 @@ cifs_put_super(struct super_block *sb) if (rc) { cERROR(1, ("cifs_umount failed with return code %d", rc)); } +#ifdef CONFIG_CIFS_DFS_UPCALL + if (cifs_sb->mountdata) { + kfree(cifs_sb->mountdata); + cifs_sb->mountdata = NULL; + } +#endif + unload_nls(cifs_sb->local_nls); kfree(cifs_sb); return; @@ -553,7 +588,7 @@ static loff_t cifs_llseek(struct file *file, loff_t offset, int origin) return remote_llseek(file, offset, origin); } -static struct file_system_type cifs_fs_type = { +struct file_system_type cifs_fs_type = { .owner = THIS_MODULE, .name = "cifs", .get_sb = cifs_get_sb, diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h index 2a21dc66f0de..2e68126d07eb 100644 --- a/fs/cifs/cifsfs.h +++ b/fs/cifs/cifsfs.h @@ -32,6 +32,7 @@ #define TRUE 1 #endif +extern struct file_system_type cifs_fs_type; extern const struct address_space_operations cifs_addr_ops; extern const struct address_space_operations cifs_addr_ops_smallbuf; -- cgit v1.2.3-59-g8ed1b From 285e9670d91cdeb6b6693729950339cb45410fdc Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Tue, 14 Aug 2007 14:10:39 +0200 Subject: [SCSI] sr,sd: send media state change modification events This will send for a card reader slot (remove/add media): UEVENT[1187091572.155884] change /devices/pci0000:00/0000:00:1d.7/usb5/5-2/5-2:1.0/host7/target7:0:0/7:0:0:0 (scsi) UEVENT[1187091572.162314] remove /block/sdb/sdb1 (block) UEVENT[1187091572.172464] add /block/sdb/sdb1 (block) UEVENT[1187091572.175408] change /devices/pci0000:00/0000:00:1d.7/usb5/5-2/5-2:1.0/host7/target7:0:0/7:0:0:0 (scsi) and for a DVD drive (add/eject media): UEVENT[1187091590.189159] change /devices/pci0000:00/0000:00:1f.1/host4/target4:0:0/4:0:0:0 (scsi) UEVENT[1187091590.957124] add /module/isofs (module) UEVENT[1187091604.468207] change /devices/pci0000:00/0000:00:1f.1/host4/target4:0:0/4:0:0:0 (scsi) Userspace gets events, even for unpartitioned media. This unifies the event handling for asynchronoous events (AN) and events caused by perodical polling the device from userspace. Signed-off-by: Kay Sievers [jejb: modified for new event API] Signed-off-by: James Bottomley --- drivers/scsi/sd.c | 24 +++++++++++++++--------- drivers/scsi/sr.c | 14 +++++++++++--- drivers/scsi/sr.h | 1 + include/scsi/sd.h | 1 + 4 files changed, 28 insertions(+), 12 deletions(-) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index a69b155f39a2..18343a6acd8e 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -749,8 +749,11 @@ static int sd_media_changed(struct gendisk *disk) * can deal with it then. It is only because of unrecoverable errors * that we would ever take a device offline in the first place. */ - if (!scsi_device_online(sdp)) - goto not_present; + if (!scsi_device_online(sdp)) { + set_media_not_present(sdkp); + retval = 1; + goto out; + } /* * Using TEST_UNIT_READY enables differentiation between drive with @@ -762,6 +765,7 @@ static int sd_media_changed(struct gendisk *disk) * sd_revalidate() is called. */ retval = -ENODEV; + if (scsi_block_when_processing_errors(sdp)) retval = scsi_test_unit_ready(sdp, SD_TIMEOUT, SD_MAX_RETRIES); @@ -771,8 +775,11 @@ static int sd_media_changed(struct gendisk *disk) * and we will figure it out later once the drive is * available again. */ - if (retval) - goto not_present; + if (retval) { + set_media_not_present(sdkp); + retval = 1; + goto out; + } /* * For removable scsi disk we have to recognise the presence @@ -783,12 +790,11 @@ static int sd_media_changed(struct gendisk *disk) retval = sdp->changed; sdp->changed = 0; - +out: + if (retval != sdkp->previous_state) + sdev_evt_send_simple(sdp, SDEV_EVT_MEDIA_CHANGE, GFP_KERNEL); + sdkp->previous_state = retval; return retval; - -not_present: - set_media_not_present(sdkp); - return 1; } static int sd_sync_cache(struct scsi_disk *sdkp) diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index c61999031141..7702681d93f9 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -192,8 +192,9 @@ static int sr_media_change(struct cdrom_device_info *cdi, int slot) * and we will figure it out later once the drive is * available again. */ cd->device->changed = 1; - return 1; /* This will force a flush, if called from - * check_disk_change */ + /* This will force a flush, if called from check_disk_change */ + retval = 1; + goto out; }; retval = cd->device->changed; @@ -203,9 +204,16 @@ static int sr_media_change(struct cdrom_device_info *cdi, int slot) if (retval) { /* check multisession offset etc */ sr_cd_check(cdi); - get_sectorsize(cd); } + +out: + /* Notify userspace, that media has changed. */ + if (retval != cd->previous_state) + sdev_evt_send_simple(cd->device, SDEV_EVT_MEDIA_CHANGE, + GFP_KERNEL); + cd->previous_state = retval; + return retval; } diff --git a/drivers/scsi/sr.h b/drivers/scsi/sr.h index d65de9621b27..0d04e2878c9d 100644 --- a/drivers/scsi/sr.h +++ b/drivers/scsi/sr.h @@ -37,6 +37,7 @@ typedef struct scsi_cd { unsigned xa_flag:1; /* CD has XA sectors ? */ unsigned readcd_known:1; /* drive supports READ_CD (0xbe) */ unsigned readcd_cdda:1; /* reading audio data using READ_CD */ + unsigned previous_state:1; /* media has changed */ struct cdrom_device_info cdi; /* We hold gendisk and scsi_device references on probe and use * the refs on this kref to decide when to release them */ diff --git a/include/scsi/sd.h b/include/scsi/sd.h index f7513313ef0d..8ea9f7358ac1 100644 --- a/include/scsi/sd.h +++ b/include/scsi/sd.h @@ -41,6 +41,7 @@ struct scsi_disk { u32 index; u8 media_present; u8 write_prot; + unsigned previous_state : 1; unsigned WCE : 1; /* state of disk WCE bit */ unsigned RCD : 1; /* state of disk RCD bit, unused */ unsigned DPOFUA : 1; /* state of disk DPOFUA bit */ -- cgit v1.2.3-59-g8ed1b From 1237c98db2aa94b42dbb9fb1df062b7d3733dc83 Mon Sep 17 00:00:00 2001 From: Gilbert Wu Date: Mon, 22 Oct 2007 15:19:11 -0700 Subject: [SCSI] aic94xx: update BIOS image from user space. 1. Create a file "update_bios" in sysfs to allow user to update bios from user space. 2. The BIOS image file can be downloaded from web site "http://www.adaptec.com/en-US/downloads/bios_fw/bios_fw_ver?productId=SAS-48300&dn=Adaptec+Serial+Attached+SCSI+48300" and copy the BIOS image into /lib/firmware folder. 3. The aic994xx will accept "update bios_file" and "verify bios_file" commands to perform update and verify BIOS image . For example: Type "echo "update asc483c01.ufi" > /sys/devices/.../update_bios" to update BIOS image from /lib/firmware/as483c01.ufi file into HBA's flash memory. Type "echo "verify asc483c01.ufi" > /sys/devices/.../update_bios" to verify BIOS image between /lib/firmware/asc48c01.ufi file and HBA's flash memory. 4. Type "cat /sys/devices/.../update_bios" to view the status or result of updating BIOS. Signed-off-by: Gilbert Wu Signed-off-by: James Bottomley --- drivers/scsi/aic94xx/aic94xx_hwi.h | 3 + drivers/scsi/aic94xx/aic94xx_init.c | 184 +++++++++++++++++ drivers/scsi/aic94xx/aic94xx_sds.c | 389 ++++++++++++++++++++++++++++++++++++ drivers/scsi/aic94xx/aic94xx_sds.h | 121 +++++++++++ 4 files changed, 697 insertions(+) create mode 100644 drivers/scsi/aic94xx/aic94xx_sds.h diff --git a/drivers/scsi/aic94xx/aic94xx_hwi.h b/drivers/scsi/aic94xx/aic94xx_hwi.h index 491e5d8a98bc..150f6706d23f 100644 --- a/drivers/scsi/aic94xx/aic94xx_hwi.h +++ b/drivers/scsi/aic94xx/aic94xx_hwi.h @@ -72,6 +72,7 @@ struct flash_struct { u8 manuf; u8 dev_id; u8 sec_prot; + u8 method; u32 dir_offs; }; @@ -216,6 +217,8 @@ struct asd_ha_struct { struct dma_pool *scb_pool; struct asd_seq_data seq; /* sequencer related */ + u32 bios_status; + const struct firmware *bios_image; }; /* ---------- Common macros ---------- */ diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c index b70d6e7f96e9..de0667011e13 100644 --- a/drivers/scsi/aic94xx/aic94xx_init.c +++ b/drivers/scsi/aic94xx/aic94xx_init.c @@ -29,6 +29,7 @@ #include #include #include +#include #include @@ -36,6 +37,7 @@ #include "aic94xx_reg.h" #include "aic94xx_hwi.h" #include "aic94xx_seq.h" +#include "aic94xx_sds.h" /* The format is "version.release.patchlevel" */ #define ASD_DRIVER_VERSION "1.0.3" @@ -313,6 +315,181 @@ static ssize_t asd_show_dev_pcba_sn(struct device *dev, } static DEVICE_ATTR(pcba_sn, S_IRUGO, asd_show_dev_pcba_sn, NULL); +#define FLASH_CMD_NONE 0x00 +#define FLASH_CMD_UPDATE 0x01 +#define FLASH_CMD_VERIFY 0x02 + +struct flash_command { + u8 command[8]; + int code; +}; + +static struct flash_command flash_command_table[] = +{ + {"verify", FLASH_CMD_VERIFY}, + {"update", FLASH_CMD_UPDATE}, + {"", FLASH_CMD_NONE} /* Last entry should be NULL. */ +}; + +struct error_bios { + char *reason; + int err_code; +}; + +static struct error_bios flash_error_table[] = +{ + {"Failed to open bios image file", FAIL_OPEN_BIOS_FILE}, + {"PCI ID mismatch", FAIL_CHECK_PCI_ID}, + {"Checksum mismatch", FAIL_CHECK_SUM}, + {"Unknown Error", FAIL_UNKNOWN}, + {"Failed to verify.", FAIL_VERIFY}, + {"Failed to reset flash chip.", FAIL_RESET_FLASH}, + {"Failed to find flash chip type.", FAIL_FIND_FLASH_ID}, + {"Failed to erash flash chip.", FAIL_ERASE_FLASH}, + {"Failed to program flash chip.", FAIL_WRITE_FLASH}, + {"Flash in progress", FLASH_IN_PROGRESS}, + {"Image file size Error", FAIL_FILE_SIZE}, + {"Input parameter error", FAIL_PARAMETERS}, + {"Out of memory", FAIL_OUT_MEMORY}, + {"OK", 0} /* Last entry err_code = 0. */ +}; + +static ssize_t asd_store_update_bios(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct asd_ha_struct *asd_ha = dev_to_asd_ha(dev); + char *cmd_ptr, *filename_ptr; + struct bios_file_header header, *hdr_ptr; + int res, i; + u32 csum = 0; + int flash_command = FLASH_CMD_NONE; + int err = 0; + + cmd_ptr = kzalloc(count*2, GFP_KERNEL); + + if (!cmd_ptr) { + err = FAIL_OUT_MEMORY; + goto out; + } + + filename_ptr = cmd_ptr + count; + res = sscanf(buf, "%s %s", cmd_ptr, filename_ptr); + if (res != 2) { + err = FAIL_PARAMETERS; + goto out1; + } + + for (i = 0; flash_command_table[i].code != FLASH_CMD_NONE; i++) { + if (!memcmp(flash_command_table[i].command, + cmd_ptr, strlen(cmd_ptr))) { + flash_command = flash_command_table[i].code; + break; + } + } + if (flash_command == FLASH_CMD_NONE) { + err = FAIL_PARAMETERS; + goto out1; + } + + if (asd_ha->bios_status == FLASH_IN_PROGRESS) { + err = FLASH_IN_PROGRESS; + goto out1; + } + err = request_firmware(&asd_ha->bios_image, + filename_ptr, + &asd_ha->pcidev->dev); + if (err) { + asd_printk("Failed to load bios image file %s, error %d\n", + filename_ptr, err); + err = FAIL_OPEN_BIOS_FILE; + goto out1; + } + + hdr_ptr = (struct bios_file_header *)asd_ha->bios_image->data; + + if ((hdr_ptr->contrl_id.vendor != asd_ha->pcidev->vendor || + hdr_ptr->contrl_id.device != asd_ha->pcidev->device) && + (hdr_ptr->contrl_id.sub_vendor != asd_ha->pcidev->vendor || + hdr_ptr->contrl_id.sub_device != asd_ha->pcidev->device)) { + + ASD_DPRINTK("The PCI vendor or device id does not match\n"); + ASD_DPRINTK("vendor=%x dev=%x sub_vendor=%x sub_dev=%x" + " pci vendor=%x pci dev=%x\n", + hdr_ptr->contrl_id.vendor, + hdr_ptr->contrl_id.device, + hdr_ptr->contrl_id.sub_vendor, + hdr_ptr->contrl_id.sub_device, + asd_ha->pcidev->vendor, + asd_ha->pcidev->device); + err = FAIL_CHECK_PCI_ID; + goto out2; + } + + if (hdr_ptr->filelen != asd_ha->bios_image->size) { + err = FAIL_FILE_SIZE; + goto out2; + } + + /* calculate checksum */ + for (i = 0; i < hdr_ptr->filelen; i++) + csum += asd_ha->bios_image->data[i]; + + if ((csum & 0x0000ffff) != hdr_ptr->checksum) { + ASD_DPRINTK("BIOS file checksum mismatch\n"); + err = FAIL_CHECK_SUM; + goto out2; + } + if (flash_command == FLASH_CMD_UPDATE) { + asd_ha->bios_status = FLASH_IN_PROGRESS; + err = asd_write_flash_seg(asd_ha, + &asd_ha->bios_image->data[sizeof(*hdr_ptr)], + 0, hdr_ptr->filelen-sizeof(*hdr_ptr)); + if (!err) + err = asd_verify_flash_seg(asd_ha, + &asd_ha->bios_image->data[sizeof(*hdr_ptr)], + 0, hdr_ptr->filelen-sizeof(*hdr_ptr)); + } else { + asd_ha->bios_status = FLASH_IN_PROGRESS; + err = asd_verify_flash_seg(asd_ha, + &asd_ha->bios_image->data[sizeof(header)], + 0, hdr_ptr->filelen-sizeof(header)); + } + +out2: + release_firmware(asd_ha->bios_image); +out1: + kfree(cmd_ptr); +out: + asd_ha->bios_status = err; + + if (!err) + return count; + else + return -err; +} + +static ssize_t asd_show_update_bios(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int i; + struct asd_ha_struct *asd_ha = dev_to_asd_ha(dev); + + for (i = 0; flash_error_table[i].err_code != 0; i++) { + if (flash_error_table[i].err_code == asd_ha->bios_status) + break; + } + if (asd_ha->bios_status != FLASH_IN_PROGRESS) + asd_ha->bios_status = FLASH_OK; + + return snprintf(buf, PAGE_SIZE, "status=%x %s\n", + flash_error_table[i].err_code, + flash_error_table[i].reason); +} + +static DEVICE_ATTR(update_bios, S_IRUGO|S_IWUGO, + asd_show_update_bios, asd_store_update_bios); + static int asd_create_dev_attrs(struct asd_ha_struct *asd_ha) { int err; @@ -328,9 +505,14 @@ static int asd_create_dev_attrs(struct asd_ha_struct *asd_ha) err = device_create_file(&asd_ha->pcidev->dev, &dev_attr_pcba_sn); if (err) goto err_biosb; + err = device_create_file(&asd_ha->pcidev->dev, &dev_attr_update_bios); + if (err) + goto err_update_bios; return 0; +err_update_bios: + device_remove_file(&asd_ha->pcidev->dev, &dev_attr_pcba_sn); err_biosb: device_remove_file(&asd_ha->pcidev->dev, &dev_attr_bios_build); err_rev: @@ -343,6 +525,7 @@ static void asd_remove_dev_attrs(struct asd_ha_struct *asd_ha) device_remove_file(&asd_ha->pcidev->dev, &dev_attr_revision); device_remove_file(&asd_ha->pcidev->dev, &dev_attr_bios_build); device_remove_file(&asd_ha->pcidev->dev, &dev_attr_pcba_sn); + device_remove_file(&asd_ha->pcidev->dev, &dev_attr_update_bios); } /* The first entry, 0, is used for dynamic ids, the rest for devices @@ -589,6 +772,7 @@ static int __devinit asd_pci_probe(struct pci_dev *dev, asd_ha->sas_ha.dev = &asd_ha->pcidev->dev; asd_ha->sas_ha.lldd_ha = asd_ha; + asd_ha->bios_status = FLASH_OK; asd_ha->name = asd_dev->name; asd_printk("found %s, device %s\n", asd_ha->name, pci_name(dev)); diff --git a/drivers/scsi/aic94xx/aic94xx_sds.c b/drivers/scsi/aic94xx/aic94xx_sds.c index 06509bff71f7..2a4c933eb89c 100644 --- a/drivers/scsi/aic94xx/aic94xx_sds.c +++ b/drivers/scsi/aic94xx/aic94xx_sds.c @@ -30,6 +30,7 @@ #include "aic94xx.h" #include "aic94xx_reg.h" +#include "aic94xx_sds.h" /* ---------- OCM stuff ---------- */ @@ -1083,3 +1084,391 @@ out: kfree(flash_dir); return err; } + +/** + * asd_verify_flash_seg - verify data with flash memory + * @asd_ha: pointer to the host adapter structure + * @src: pointer to the source data to be verified + * @dest_offset: offset from flash memory + * @bytes_to_verify: total bytes to verify + */ +int asd_verify_flash_seg(struct asd_ha_struct *asd_ha, + void *src, u32 dest_offset, u32 bytes_to_verify) +{ + u8 *src_buf; + u8 flash_char; + int err; + u32 nv_offset, reg, i; + + reg = asd_ha->hw_prof.flash.bar; + src_buf = NULL; + + err = FLASH_OK; + nv_offset = dest_offset; + src_buf = (u8 *)src; + for (i = 0; i < bytes_to_verify; i++) { + flash_char = asd_read_reg_byte(asd_ha, reg + nv_offset + i); + if (flash_char != src_buf[i]) { + err = FAIL_VERIFY; + break; + } + } + return err; +} + +/** + * asd_write_flash_seg - write data into flash memory + * @asd_ha: pointer to the host adapter structure + * @src: pointer to the source data to be written + * @dest_offset: offset from flash memory + * @bytes_to_write: total bytes to write + */ +int asd_write_flash_seg(struct asd_ha_struct *asd_ha, + void *src, u32 dest_offset, u32 bytes_to_write) +{ + u8 *src_buf; + u32 nv_offset, reg, i; + int err; + + reg = asd_ha->hw_prof.flash.bar; + src_buf = NULL; + + err = asd_check_flash_type(asd_ha); + if (err) { + ASD_DPRINTK("couldn't find the type of flash. err=%d\n", err); + return err; + } + + nv_offset = dest_offset; + err = asd_erase_nv_sector(asd_ha, nv_offset, bytes_to_write); + if (err) { + ASD_DPRINTK("Erase failed at offset:0x%x\n", + nv_offset); + return err; + } + + err = asd_reset_flash(asd_ha); + if (err) { + ASD_DPRINTK("couldn't reset flash. err=%d\n", err); + return err; + } + + src_buf = (u8 *)src; + for (i = 0; i < bytes_to_write; i++) { + /* Setup program command sequence */ + switch (asd_ha->hw_prof.flash.method) { + case FLASH_METHOD_A: + { + asd_write_reg_byte(asd_ha, + (reg + 0xAAA), 0xAA); + asd_write_reg_byte(asd_ha, + (reg + 0x555), 0x55); + asd_write_reg_byte(asd_ha, + (reg + 0xAAA), 0xA0); + asd_write_reg_byte(asd_ha, + (reg + nv_offset + i), + (*(src_buf + i))); + break; + } + case FLASH_METHOD_B: + { + asd_write_reg_byte(asd_ha, + (reg + 0x555), 0xAA); + asd_write_reg_byte(asd_ha, + (reg + 0x2AA), 0x55); + asd_write_reg_byte(asd_ha, + (reg + 0x555), 0xA0); + asd_write_reg_byte(asd_ha, + (reg + nv_offset + i), + (*(src_buf + i))); + break; + } + default: + break; + } + if (asd_chk_write_status(asd_ha, + (nv_offset + i), 0) != 0) { + ASD_DPRINTK("aicx: Write failed at offset:0x%x\n", + reg + nv_offset + i); + return FAIL_WRITE_FLASH; + } + } + + err = asd_reset_flash(asd_ha); + if (err) { + ASD_DPRINTK("couldn't reset flash. err=%d\n", err); + return err; + } + return 0; +} + +int asd_chk_write_status(struct asd_ha_struct *asd_ha, + u32 sector_addr, u8 erase_flag) +{ + u32 reg; + u32 loop_cnt; + u8 nv_data1, nv_data2; + u8 toggle_bit1; + + /* + * Read from DQ2 requires sector address + * while it's dont care for DQ6 + */ + reg = asd_ha->hw_prof.flash.bar; + + for (loop_cnt = 0; loop_cnt < 50000; loop_cnt++) { + nv_data1 = asd_read_reg_byte(asd_ha, reg); + nv_data2 = asd_read_reg_byte(asd_ha, reg); + + toggle_bit1 = ((nv_data1 & FLASH_STATUS_BIT_MASK_DQ6) + ^ (nv_data2 & FLASH_STATUS_BIT_MASK_DQ6)); + + if (toggle_bit1 == 0) { + return 0; + } else { + if (nv_data2 & FLASH_STATUS_BIT_MASK_DQ5) { + nv_data1 = asd_read_reg_byte(asd_ha, + reg); + nv_data2 = asd_read_reg_byte(asd_ha, + reg); + toggle_bit1 = + ((nv_data1 & FLASH_STATUS_BIT_MASK_DQ6) + ^ (nv_data2 & FLASH_STATUS_BIT_MASK_DQ6)); + + if (toggle_bit1 == 0) + return 0; + } + } + + /* + * ERASE is a sector-by-sector operation and requires + * more time to finish while WRITE is byte-byte-byte + * operation and takes lesser time to finish. + * + * For some strange reason a reduced ERASE delay gives different + * behaviour across different spirit boards. Hence we set + * a optimum balance of 50mus for ERASE which works well + * across all boards. + */ + if (erase_flag) { + udelay(FLASH_STATUS_ERASE_DELAY_COUNT); + } else { + udelay(FLASH_STATUS_WRITE_DELAY_COUNT); + } + } + return -1; +} + +/** + * asd_hwi_erase_nv_sector - Erase the flash memory sectors. + * @asd_ha: pointer to the host adapter structure + * @flash_addr: pointer to offset from flash memory + * @size: total bytes to erase. + */ +int asd_erase_nv_sector(struct asd_ha_struct *asd_ha, u32 flash_addr, u32 size) +{ + u32 reg; + u32 sector_addr; + + reg = asd_ha->hw_prof.flash.bar; + + /* sector staring address */ + sector_addr = flash_addr & FLASH_SECTOR_SIZE_MASK; + + /* + * Erasing an flash sector needs to be done in six consecutive + * write cyles. + */ + while (sector_addr < flash_addr+size) { + switch (asd_ha->hw_prof.flash.method) { + case FLASH_METHOD_A: + asd_write_reg_byte(asd_ha, (reg + 0xAAA), 0xAA); + asd_write_reg_byte(asd_ha, (reg + 0x555), 0x55); + asd_write_reg_byte(asd_ha, (reg + 0xAAA), 0x80); + asd_write_reg_byte(asd_ha, (reg + 0xAAA), 0xAA); + asd_write_reg_byte(asd_ha, (reg + 0x555), 0x55); + asd_write_reg_byte(asd_ha, (reg + sector_addr), 0x30); + break; + case FLASH_METHOD_B: + asd_write_reg_byte(asd_ha, (reg + 0x555), 0xAA); + asd_write_reg_byte(asd_ha, (reg + 0x2AA), 0x55); + asd_write_reg_byte(asd_ha, (reg + 0x555), 0x80); + asd_write_reg_byte(asd_ha, (reg + 0x555), 0xAA); + asd_write_reg_byte(asd_ha, (reg + 0x2AA), 0x55); + asd_write_reg_byte(asd_ha, (reg + sector_addr), 0x30); + break; + default: + break; + } + + if (asd_chk_write_status(asd_ha, sector_addr, 1) != 0) + return FAIL_ERASE_FLASH; + + sector_addr += FLASH_SECTOR_SIZE; + } + + return 0; +} + +int asd_check_flash_type(struct asd_ha_struct *asd_ha) +{ + u8 manuf_id; + u8 dev_id; + u8 sec_prot; + u32 inc; + u32 reg; + int err; + + /* get Flash memory base address */ + reg = asd_ha->hw_prof.flash.bar; + + /* Determine flash info */ + err = asd_reset_flash(asd_ha); + if (err) { + ASD_DPRINTK("couldn't reset flash. err=%d\n", err); + return err; + } + + asd_ha->hw_prof.flash.method = FLASH_METHOD_UNKNOWN; + asd_ha->hw_prof.flash.manuf = FLASH_MANUF_ID_UNKNOWN; + asd_ha->hw_prof.flash.dev_id = FLASH_DEV_ID_UNKNOWN; + + /* Get flash info. This would most likely be AMD Am29LV family flash. + * First try the sequence for word mode. It is the same as for + * 008B (byte mode only), 160B (word mode) and 800D (word mode). + */ + inc = asd_ha->hw_prof.flash.wide ? 2 : 1; + asd_write_reg_byte(asd_ha, reg + 0xAAA, 0xAA); + asd_write_reg_byte(asd_ha, reg + 0x555, 0x55); + asd_write_reg_byte(asd_ha, reg + 0xAAA, 0x90); + manuf_id = asd_read_reg_byte(asd_ha, reg); + dev_id = asd_read_reg_byte(asd_ha, reg + inc); + sec_prot = asd_read_reg_byte(asd_ha, reg + inc + inc); + /* Get out of autoselect mode. */ + err = asd_reset_flash(asd_ha); + if (err) { + ASD_DPRINTK("couldn't reset flash. err=%d\n", err); + return err; + } + ASD_DPRINTK("Flash MethodA manuf_id(0x%x) dev_id(0x%x) " + "sec_prot(0x%x)\n", manuf_id, dev_id, sec_prot); + err = asd_reset_flash(asd_ha); + if (err != 0) + return err; + + switch (manuf_id) { + case FLASH_MANUF_ID_AMD: + switch (sec_prot) { + case FLASH_DEV_ID_AM29LV800DT: + case FLASH_DEV_ID_AM29LV640MT: + case FLASH_DEV_ID_AM29F800B: + asd_ha->hw_prof.flash.method = FLASH_METHOD_A; + break; + default: + break; + } + break; + case FLASH_MANUF_ID_ST: + switch (sec_prot) { + case FLASH_DEV_ID_STM29W800DT: + case FLASH_DEV_ID_STM29LV640: + asd_ha->hw_prof.flash.method = FLASH_METHOD_A; + break; + default: + break; + } + break; + case FLASH_MANUF_ID_FUJITSU: + switch (sec_prot) { + case FLASH_DEV_ID_MBM29LV800TE: + case FLASH_DEV_ID_MBM29DL800TA: + asd_ha->hw_prof.flash.method = FLASH_METHOD_A; + break; + } + break; + case FLASH_MANUF_ID_MACRONIX: + switch (sec_prot) { + case FLASH_DEV_ID_MX29LV800BT: + asd_ha->hw_prof.flash.method = FLASH_METHOD_A; + break; + } + break; + } + + if (asd_ha->hw_prof.flash.method == FLASH_METHOD_UNKNOWN) { + err = asd_reset_flash(asd_ha); + if (err) { + ASD_DPRINTK("couldn't reset flash. err=%d\n", err); + return err; + } + + /* Issue Unlock sequence for AM29LV008BT */ + asd_write_reg_byte(asd_ha, (reg + 0x555), 0xAA); + asd_write_reg_byte(asd_ha, (reg + 0x2AA), 0x55); + asd_write_reg_byte(asd_ha, (reg + 0x555), 0x90); + manuf_id = asd_read_reg_byte(asd_ha, reg); + dev_id = asd_read_reg_byte(asd_ha, reg + inc); + sec_prot = asd_read_reg_byte(asd_ha, reg + inc + inc); + + ASD_DPRINTK("Flash MethodB manuf_id(0x%x) dev_id(0x%x) sec_prot" + "(0x%x)\n", manuf_id, dev_id, sec_prot); + + err = asd_reset_flash(asd_ha); + if (err != 0) { + ASD_DPRINTK("couldn't reset flash. err=%d\n", err); + return err; + } + + switch (manuf_id) { + case FLASH_MANUF_ID_AMD: + switch (dev_id) { + case FLASH_DEV_ID_AM29LV008BT: + asd_ha->hw_prof.flash.method = FLASH_METHOD_B; + break; + default: + break; + } + break; + case FLASH_MANUF_ID_ST: + switch (dev_id) { + case FLASH_DEV_ID_STM29008: + asd_ha->hw_prof.flash.method = FLASH_METHOD_B; + break; + default: + break; + } + break; + case FLASH_MANUF_ID_FUJITSU: + switch (dev_id) { + case FLASH_DEV_ID_MBM29LV008TA: + asd_ha->hw_prof.flash.method = FLASH_METHOD_B; + break; + } + break; + case FLASH_MANUF_ID_INTEL: + switch (dev_id) { + case FLASH_DEV_ID_I28LV00TAT: + asd_ha->hw_prof.flash.method = FLASH_METHOD_B; + break; + } + break; + case FLASH_MANUF_ID_MACRONIX: + switch (dev_id) { + case FLASH_DEV_ID_I28LV00TAT: + asd_ha->hw_prof.flash.method = FLASH_METHOD_B; + break; + } + break; + default: + return FAIL_FIND_FLASH_ID; + } + } + + if (asd_ha->hw_prof.flash.method == FLASH_METHOD_UNKNOWN) + return FAIL_FIND_FLASH_ID; + + asd_ha->hw_prof.flash.manuf = manuf_id; + asd_ha->hw_prof.flash.dev_id = dev_id; + asd_ha->hw_prof.flash.sec_prot = sec_prot; + return 0; +} diff --git a/drivers/scsi/aic94xx/aic94xx_sds.h b/drivers/scsi/aic94xx/aic94xx_sds.h new file mode 100644 index 000000000000..bb9795a04dc3 --- /dev/null +++ b/drivers/scsi/aic94xx/aic94xx_sds.h @@ -0,0 +1,121 @@ +/* + * Aic94xx SAS/SATA driver hardware interface header file. + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Gilbert Wu + * + * This file is licensed under GPLv2. + * + * This file is part of the aic94xx driver. + * + * The aic94xx driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the + * License. + * + * The aic94xx driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the aic94xx driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ +#ifndef _AIC94XX_SDS_H_ +#define _AIC94XX_SDS_H_ + +enum { + FLASH_METHOD_UNKNOWN, + FLASH_METHOD_A, + FLASH_METHOD_B +}; + +#define FLASH_MANUF_ID_AMD 0x01 +#define FLASH_MANUF_ID_ST 0x20 +#define FLASH_MANUF_ID_FUJITSU 0x04 +#define FLASH_MANUF_ID_MACRONIX 0xC2 +#define FLASH_MANUF_ID_INTEL 0x89 +#define FLASH_MANUF_ID_UNKNOWN 0xFF + +#define FLASH_DEV_ID_AM29LV008BT 0x3E +#define FLASH_DEV_ID_AM29LV800DT 0xDA +#define FLASH_DEV_ID_STM29W800DT 0xD7 +#define FLASH_DEV_ID_STM29LV640 0xDE +#define FLASH_DEV_ID_STM29008 0xEA +#define FLASH_DEV_ID_MBM29LV800TE 0xDA +#define FLASH_DEV_ID_MBM29DL800TA 0x4A +#define FLASH_DEV_ID_MBM29LV008TA 0x3E +#define FLASH_DEV_ID_AM29LV640MT 0x7E +#define FLASH_DEV_ID_AM29F800B 0xD6 +#define FLASH_DEV_ID_MX29LV800BT 0xDA +#define FLASH_DEV_ID_MX29LV008CT 0xDA +#define FLASH_DEV_ID_I28LV00TAT 0x3E +#define FLASH_DEV_ID_UNKNOWN 0xFF + +/* status bit mask values */ +#define FLASH_STATUS_BIT_MASK_DQ6 0x40 +#define FLASH_STATUS_BIT_MASK_DQ5 0x20 +#define FLASH_STATUS_BIT_MASK_DQ2 0x04 + +/* minimum value in micro seconds needed for checking status */ +#define FLASH_STATUS_ERASE_DELAY_COUNT 50 +#define FLASH_STATUS_WRITE_DELAY_COUNT 25 + +#define FLASH_SECTOR_SIZE 0x010000 +#define FLASH_SECTOR_SIZE_MASK 0xffff0000 + +#define FLASH_OK 0x000000 +#define FAIL_OPEN_BIOS_FILE 0x000100 +#define FAIL_CHECK_PCI_ID 0x000200 +#define FAIL_CHECK_SUM 0x000300 +#define FAIL_UNKNOWN 0x000400 +#define FAIL_VERIFY 0x000500 +#define FAIL_RESET_FLASH 0x000600 +#define FAIL_FIND_FLASH_ID 0x000700 +#define FAIL_ERASE_FLASH 0x000800 +#define FAIL_WRITE_FLASH 0x000900 +#define FAIL_FILE_SIZE 0x000a00 +#define FAIL_PARAMETERS 0x000b00 +#define FAIL_OUT_MEMORY 0x000c00 +#define FLASH_IN_PROGRESS 0x001000 + +struct controller_id { + u32 vendor; /* PCI Vendor ID */ + u32 device; /* PCI Device ID */ + u32 sub_vendor; /* PCI Subvendor ID */ + u32 sub_device; /* PCI Subdevice ID */ +}; + +struct image_info { + u32 ImageId; /* Identifies the image */ + u32 ImageOffset; /* Offset the beginning of the file */ + u32 ImageLength; /* length of the image */ + u32 ImageChecksum; /* Image checksum */ + u32 ImageVersion; /* Version of the image, could be build number */ +}; + +struct bios_file_header { + u8 signature[32]; /* Signature/Cookie to identify the file */ + u32 checksum; /*Entire file checksum with this field zero */ + u32 antidote; /* Entire file checksum with this field 0xFFFFFFFF */ + struct controller_id contrl_id; /*PCI id to identify the controller */ + u32 filelen; /*Length of the entire file*/ + u32 chunk_num; /*The chunk/part number for multiple Image files */ + u32 total_chunks; /*Total number of chunks/parts in the image file */ + u32 num_images; /* Number of images in the file */ + u32 build_num; /* Build number of this image */ + struct image_info image_header; +}; + +int asd_verify_flash_seg(struct asd_ha_struct *asd_ha, + void *src, u32 dest_offset, u32 bytes_to_verify); +int asd_write_flash_seg(struct asd_ha_struct *asd_ha, + void *src, u32 dest_offset, u32 bytes_to_write); +int asd_chk_write_status(struct asd_ha_struct *asd_ha, + u32 sector_addr, u8 erase_flag); +int asd_check_flash_type(struct asd_ha_struct *asd_ha); +int asd_erase_nv_sector(struct asd_ha_struct *asd_ha, + u32 flash_addr, u32 size); +#endif -- cgit v1.2.3-59-g8ed1b From f10ab66fa564fd624b04fe207ccae206df85efbf Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Thu, 25 Oct 2007 01:21:30 +0900 Subject: [SCSI] tgt: convert to use the data buffer accessors - convert to use the new accessors for the sg lists and the parameters. Signed-off-by: FUJITA Tomonori Signed-off-by: James Bottomley --- drivers/scsi/ibmvscsi/ibmvstgt.c | 2 +- drivers/scsi/libsrp.c | 23 ++++++++++++----------- drivers/scsi/scsi_tgt_if.c | 2 +- drivers/scsi/scsi_tgt_lib.c | 11 ++++++----- 4 files changed, 20 insertions(+), 18 deletions(-) diff --git a/drivers/scsi/ibmvscsi/ibmvstgt.c b/drivers/scsi/ibmvscsi/ibmvstgt.c index 82bcab688b44..d63f11e95abf 100644 --- a/drivers/scsi/ibmvscsi/ibmvstgt.c +++ b/drivers/scsi/ibmvscsi/ibmvstgt.c @@ -292,7 +292,7 @@ static int ibmvstgt_cmd_done(struct scsi_cmnd *sc, dprintk("%p %p %x %u\n", iue, target, vio_iu(iue)->srp.cmd.cdb[0], cmd->usg_sg); - if (sc->use_sg) + if (scsi_sg_count(sc)) err = srp_transfer_data(sc, &vio_iu(iue)->srp.cmd, ibmvstgt_rdma, 1, 1); spin_lock_irqsave(&target->lock, flags); diff --git a/drivers/scsi/libsrp.c b/drivers/scsi/libsrp.c index 2ad0a27dbaab..5cff0204227d 100644 --- a/drivers/scsi/libsrp.c +++ b/drivers/scsi/libsrp.c @@ -192,18 +192,18 @@ static int srp_direct_data(struct scsi_cmnd *sc, struct srp_direct_buf *md, if (dma_map) { iue = (struct iu_entry *) sc->SCp.ptr; - sg = sc->request_buffer; + sg = scsi_sglist(sc); - dprintk("%p %u %u %d\n", iue, sc->request_bufflen, - md->len, sc->use_sg); + dprintk("%p %u %u %d\n", iue, scsi_bufflen(sc), + md->len, scsi_sg_count(sc)); - nsg = dma_map_sg(iue->target->dev, sg, sc->use_sg, + nsg = dma_map_sg(iue->target->dev, sg, scsi_sg_count(sc), DMA_BIDIRECTIONAL); if (!nsg) { - printk("fail to map %p %d\n", iue, sc->use_sg); + printk("fail to map %p %d\n", iue, scsi_sg_count(sc)); return 0; } - len = min(sc->request_bufflen, md->len); + len = min(scsi_bufflen(sc), md->len); } else len = md->len; @@ -229,10 +229,10 @@ static int srp_indirect_data(struct scsi_cmnd *sc, struct srp_cmd *cmd, if (dma_map || ext_desc) { iue = (struct iu_entry *) sc->SCp.ptr; - sg = sc->request_buffer; + sg = scsi_sglist(sc); dprintk("%p %u %u %d %d\n", - iue, sc->request_bufflen, id->len, + iue, scsi_bufflen(sc), id->len, cmd->data_in_desc_cnt, cmd->data_out_desc_cnt); } @@ -268,13 +268,14 @@ static int srp_indirect_data(struct scsi_cmnd *sc, struct srp_cmd *cmd, rdma: if (dma_map) { - nsg = dma_map_sg(iue->target->dev, sg, sc->use_sg, DMA_BIDIRECTIONAL); + nsg = dma_map_sg(iue->target->dev, sg, scsi_sg_count(sc), + DMA_BIDIRECTIONAL); if (!nsg) { - eprintk("fail to map %p %d\n", iue, sc->use_sg); + eprintk("fail to map %p %d\n", iue, scsi_sg_count(sc)); err = -EIO; goto free_mem; } - len = min(sc->request_bufflen, id->len); + len = min(scsi_bufflen(sc), id->len); } else len = id->len; diff --git a/drivers/scsi/scsi_tgt_if.c b/drivers/scsi/scsi_tgt_if.c index 9815a1a2db24..d2557dbc2dc1 100644 --- a/drivers/scsi/scsi_tgt_if.c +++ b/drivers/scsi/scsi_tgt_if.c @@ -112,7 +112,7 @@ int scsi_tgt_uspace_send_cmd(struct scsi_cmnd *cmd, u64 itn_id, memset(&ev, 0, sizeof(ev)); ev.p.cmd_req.host_no = shost->host_no; ev.p.cmd_req.itn_id = itn_id; - ev.p.cmd_req.data_len = cmd->request_bufflen; + ev.p.cmd_req.data_len = scsi_bufflen(cmd); memcpy(ev.p.cmd_req.scb, cmd->cmnd, sizeof(ev.p.cmd_req.scb)); memcpy(ev.p.cmd_req.lun, lun, sizeof(ev.p.cmd_req.lun)); ev.p.cmd_req.attribute = cmd->tag; diff --git a/drivers/scsi/scsi_tgt_lib.c b/drivers/scsi/scsi_tgt_lib.c index a91761c3645f..deea3cd5bf49 100644 --- a/drivers/scsi/scsi_tgt_lib.c +++ b/drivers/scsi/scsi_tgt_lib.c @@ -331,7 +331,7 @@ static void scsi_tgt_cmd_done(struct scsi_cmnd *cmd) scsi_tgt_uspace_send_status(cmd, tcmd->itn_id, tcmd->tag); - if (cmd->request_buffer) + if (scsi_sglist(cmd)) scsi_free_sgtable(cmd); queue_work(scsi_tgtd, &tcmd->work); @@ -365,14 +365,15 @@ static int scsi_tgt_init_cmd(struct scsi_cmnd *cmd, gfp_t gfp_mask) cmd->request_bufflen = rq->data_len; - dprintk("cmd %p cnt %d %lu\n", cmd, cmd->use_sg, rq_data_dir(rq)); - count = blk_rq_map_sg(rq->q, rq, cmd->request_buffer); - if (likely(count <= cmd->use_sg)) { + dprintk("cmd %p cnt %d %lu\n", cmd, scsi_sg_count(cmd), + rq_data_dir(rq)); + count = blk_rq_map_sg(rq->q, rq, scsi_sglist(cmd)); + if (likely(count <= scsi_sg_count(cmd))) { cmd->use_sg = count; return 0; } - eprintk("cmd %p cnt %d\n", cmd, cmd->use_sg); + eprintk("cmd %p cnt %d\n", cmd, scsi_sg_count(cmd)); scsi_free_sgtable(cmd); return -EINVAL; } -- cgit v1.2.3-59-g8ed1b From f37a7238d379bc2befbcb08a03de03f4f446131c Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 24 Oct 2007 18:26:22 +0200 Subject: [SCSI] 53c7xx: fix removal fallout This patch does some additional cleanups after the 53c7xx removal. Signed-off-by: Adrian Bunk Acked-by: Geert Uytterhoeven Signed-off-by: James Bottomley --- Documentation/dontdiff | 2 -- Documentation/m68k/kernel-options.txt | 60 ----------------------------------- Documentation/scsi/00-INDEX | 2 -- Documentation/scsi/ncr53c7xx.txt | 40 ----------------------- drivers/scsi/.gitignore | 2 -- 5 files changed, 106 deletions(-) delete mode 100644 Documentation/scsi/ncr53c7xx.txt diff --git a/Documentation/dontdiff b/Documentation/dontdiff index f2d658a6a942..c09a96b99354 100644 --- a/Documentation/dontdiff +++ b/Documentation/dontdiff @@ -46,8 +46,6 @@ .mailmap .mm 53c700_d.h -53c7xx_d.h -53c7xx_u.h 53c8xx_d.h* BitKeeper COPYING diff --git a/Documentation/m68k/kernel-options.txt b/Documentation/m68k/kernel-options.txt index 248589e8bcf5..c93bed66e25d 100644 --- a/Documentation/m68k/kernel-options.txt +++ b/Documentation/m68k/kernel-options.txt @@ -867,66 +867,6 @@ controller and should be autodetected by the driver. An example is the 24 bit region which is specified by a mask of 0x00fffffe. -5.5) 53c7xx= ------------- - -Syntax: 53c7xx= - -These options affect the A4000T, A4091, WarpEngine, Blizzard 603e+, -and GForce 040/060 SCSI controllers on the Amiga, as well as the -builtin MVME 16x SCSI controller. - -The is a comma-separated list of the sub-options listed -below. - -5.5.1) nosync -------------- - -Syntax: nosync:0 - - Disables sync negotiation for all devices. Any value after the - colon is acceptable (and has the same effect). - -5.5.2) noasync --------------- - -[OBSOLETE, REMOVED] - -5.5.3) nodisconnect -------------------- - -Syntax: nodisconnect:0 - - Disables SCSI disconnects. Any value after the colon is acceptable - (and has the same effect). - -5.5.4) validids ---------------- - -Syntax: validids:0xNN - - Specify which SCSI ids the driver should pay attention to. This is - a bitmask (i.e. to only pay attention to ID#4, you'd use 0x10). - Default is 0x7f (devices 0-6). - -5.5.5) opthi -5.5.6) optlo ------------- - -Syntax: opthi:M,optlo:N - - Specify options for "hostdata->options". The acceptable definitions - are listed in drivers/scsi/53c7xx.h; the 32 high bits should be in - opthi and the 32 low bits in optlo. They must be specified in the - order opthi=M,optlo=N. - -5.5.7) next ------------ - - No argument. Used to separate blocks of keywords when there's more - than one 53c7xx host adapter in the system. - - /* Local Variables: */ /* mode: text */ /* End: */ diff --git a/Documentation/scsi/00-INDEX b/Documentation/scsi/00-INDEX index aa1f7e927834..c2e18e109858 100644 --- a/Documentation/scsi/00-INDEX +++ b/Documentation/scsi/00-INDEX @@ -64,8 +64,6 @@ lpfc.txt - LPFC driver release notes megaraid.txt - Common Management Module, shared code handling ioctls for LSI drivers -ncr53c7xx.txt - - info on driver for NCR53c7xx based adapters ncr53c8xx.txt - info on driver for NCR53c8xx based adapters osst.txt diff --git a/Documentation/scsi/ncr53c7xx.txt b/Documentation/scsi/ncr53c7xx.txt deleted file mode 100644 index 91e9552d63e5..000000000000 --- a/Documentation/scsi/ncr53c7xx.txt +++ /dev/null @@ -1,40 +0,0 @@ -README for WarpEngine/A4000T/A4091 SCSI kernels. - -Use the following options to disable options in the SCSI driver. - -Using amiboot for example..... - -To disable Synchronous Negotiation.... - - amiboot -k kernel 53c7xx=nosync:0 - -To disable Disconnection.... - - amiboot -k kernel 53c7xx=nodisconnect:0 - -To disable certain SCSI devices... - - amiboot -k kernel 53c7xx=validids:0x3F - - this allows only device ID's 0,1,2,3,4 and 5 for linux to handle. - (this is a bitmasked field - i.e. each bit represents a SCSI ID) - -These commands work on a per controller basis and use the option 'next' to -move to the next controller in the system. - -e.g. - amiboot -k kernel 53c7xx=nodisconnect:0,next,nosync:0 - - this uses No Disconnection on the first controller and Asynchronous - SCSI on the second controller. - -Known Issues: - -Two devices are known not to function with the default settings of using -synchronous SCSI. These are the Archive Viper 150 Tape Drive and the -SyQuest SQ555 removeable hard drive. When using these devices on a controller -use the 'nosync:0' option. - -Please try these options and post any problems/successes to me. - -Alan Hourihane diff --git a/drivers/scsi/.gitignore b/drivers/scsi/.gitignore index b385af314356..c89ae9a04399 100644 --- a/drivers/scsi/.gitignore +++ b/drivers/scsi/.gitignore @@ -1,3 +1 @@ 53c700_d.h -53c7xx_d.h -53c7xx_u.h -- cgit v1.2.3-59-g8ed1b From d1a357fcc8348d325d151f6fe0ea54e317652457 Mon Sep 17 00:00:00 2001 From: Brian King Date: Thu, 25 Oct 2007 16:06:34 -0500 Subject: [SCSI] ibmvscsi: Set default command timeout Set the default command timeout for ibmvscsi disks to 60 seconds to ensure we don't prematurely timeout commands. This fixes a problem seen where the default 30 seconds was not long enough due to congestion on the server. Signed-off-by: Brian King Signed-off-by: James Bottomley --- drivers/scsi/ibmvscsi/ibmvscsi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c index 5f2396c03958..50120c8c164b 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.c +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c @@ -1386,8 +1386,10 @@ static int ibmvscsi_slave_configure(struct scsi_device *sdev) unsigned long lock_flags = 0; spin_lock_irqsave(shost->host_lock, lock_flags); - if (sdev->type == TYPE_DISK) + if (sdev->type == TYPE_DISK) { sdev->allow_restart = 1; + sdev->timeout = 60 * HZ; + } scsi_adjust_queue_depth(sdev, 0, shost->cmd_per_lun); spin_unlock_irqrestore(shost->host_lock, lock_flags); return 0; -- cgit v1.2.3-59-g8ed1b From 57127f157298ea2dacbbc878a3c5d2a5daca772c Mon Sep 17 00:00:00 2001 From: James Smart Date: Sat, 27 Oct 2007 13:37:05 -0400 Subject: [SCSI] lpfc 8.2.3 : Added support for ASICs that report temperature Added support for ASICs that report temperature. Temperature notices are reported as events and logged. Temperature can be read via sysfs. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 13 ++++++- drivers/scsi/lpfc/lpfc_attr.c | 12 +++++++ drivers/scsi/lpfc/lpfc_crtn.h | 2 ++ drivers/scsi/lpfc/lpfc_hw.h | 36 ++++++++++++++++++- drivers/scsi/lpfc/lpfc_init.c | 55 +++++++++++++++++++++++++++++ drivers/scsi/lpfc/lpfc_logmsg.h | 1 + drivers/scsi/lpfc/lpfc_mbox.c | 18 ++++++++++ drivers/scsi/lpfc/lpfc_sli.c | 76 +++++++++++++++++++++++++++++++++++++++++ drivers/scsi/lpfc/lpfc_sli.h | 2 ++ 9 files changed, 213 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index ba3ecab9baf3..c1343fb2fcf4 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -569,6 +569,7 @@ struct lpfc_hba { atomic_t slow_ring_trc_cnt; #endif + uint8_t temp_sensor_support; /* Fields used for heart beat. */ unsigned long last_completion_time; struct timer_list hb_tmofunc; @@ -598,5 +599,15 @@ lpfc_is_link_up(struct lpfc_hba *phba) phba->link_state == LPFC_HBA_READY; } -#define FC_REG_DUMP_EVENT 0x10 /* Register for Dump events */ +#define FC_REG_DUMP_EVENT 0x10 /* Register for Dump events */ +#define FC_REG_TEMPERATURE_EVENT 0x20 /* Register for temperature + event */ +struct temp_event { + uint32_t event_type; + uint32_t event_code; + uint32_t data; +}; +#define LPFC_CRIT_TEMP 0x1 +#define LPFC_THRESHOLD_TEMP 0x2 +#define LPFC_NORMAL_TEMP 0x3 diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 80a11218b9bb..bd35e9c7b995 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -85,6 +85,15 @@ lpfc_serialnum_show(struct class_device *cdev, char *buf) return snprintf(buf, PAGE_SIZE, "%s\n",phba->SerialNumber); } +static ssize_t +lpfc_temp_sensor_show(struct class_device *cdev, char *buf) +{ + struct Scsi_Host *shost = class_to_shost(cdev); + struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; + struct lpfc_hba *phba = vport->phba; + return snprintf(buf, PAGE_SIZE, "%d\n",phba->temp_sensor_support); +} + static ssize_t lpfc_modeldesc_show(struct class_device *cdev, char *buf) { @@ -908,6 +917,8 @@ static CLASS_DEVICE_ATTR(used_rpi, S_IRUGO, lpfc_used_rpi_show, NULL); static CLASS_DEVICE_ATTR(max_xri, S_IRUGO, lpfc_max_xri_show, NULL); static CLASS_DEVICE_ATTR(used_xri, S_IRUGO, lpfc_used_xri_show, NULL); static CLASS_DEVICE_ATTR(npiv_info, S_IRUGO, lpfc_npiv_info_show, NULL); +static CLASS_DEVICE_ATTR(lpfc_temp_sensor, S_IRUGO, lpfc_temp_sensor_show, + NULL); static char *lpfc_soft_wwn_key = "C99G71SL8032A"; @@ -1494,6 +1505,7 @@ struct class_device_attribute *lpfc_hba_attrs[] = { &class_device_attr_state, &class_device_attr_num_discovered_ports, &class_device_attr_lpfc_drvr_version, + &class_device_attr_lpfc_temp_sensor, &class_device_attr_lpfc_log_verbose, &class_device_attr_lpfc_lun_queue_depth, &class_device_attr_lpfc_hba_queue_depth, diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index a599e1510710..f3916645e817 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -23,6 +23,8 @@ typedef int (*node_filter)(struct lpfc_nodelist *ndlp, void *param); struct fc_rport; void lpfc_dump_mem(struct lpfc_hba *, LPFC_MBOXQ_t *, uint16_t); void lpfc_read_nv(struct lpfc_hba *, LPFC_MBOXQ_t *); +void lpfc_config_async(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t); + void lpfc_heart_beat(struct lpfc_hba *, LPFC_MBOXQ_t *); int lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, struct lpfc_dmabuf *mp); diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index 451accd5564b..098dd022a7eb 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -1228,7 +1228,8 @@ typedef struct { /* FireFly BIU registers */ #define HS_FFER3 0x20000000 /* Bit 29 */ #define HS_FFER2 0x40000000 /* Bit 30 */ #define HS_FFER1 0x80000000 /* Bit 31 */ -#define HS_FFERM 0xFF000000 /* Mask for error bits 31:24 */ +#define HS_CRIT_TEMP 0x00000100 /* Bit 8 */ +#define HS_FFERM 0xFF000100 /* Mask for error bits 31:24 and 8 */ /* Host Control Register */ @@ -1282,6 +1283,7 @@ typedef struct { /* FireFly BIU registers */ #define MBX_KILL_BOARD 0x24 #define MBX_CONFIG_FARP 0x25 #define MBX_BEACON 0x2A +#define MBX_ASYNCEVT_ENABLE 0x33 #define MBX_HEARTBEAT 0x31 #define MBX_CONFIG_HBQ 0x7C @@ -1344,6 +1346,7 @@ typedef struct { /* FireFly BIU registers */ /* SLI_2 IOCB Command Set */ +#define CMD_ASYNC_STATUS 0x7C #define CMD_RCV_SEQUENCE64_CX 0x81 #define CMD_XMIT_SEQUENCE64_CR 0x82 #define CMD_XMIT_SEQUENCE64_CX 0x83 @@ -1406,6 +1409,8 @@ typedef struct { /* FireFly BIU registers */ #define MBX_BUSY 0xffffff /* Attempted cmd to busy Mailbox */ #define MBX_TIMEOUT 0xfffffe /* time-out expired waiting for */ +#define TEMPERATURE_OFFSET 0xB0 /* Slim offset for critical temperature event */ + /* * Begin Structure Definitions for Mailbox Commands */ @@ -2606,6 +2611,18 @@ typedef struct { uint32_t IPAddress; } CONFIG_FARP_VAR; +/* Structure for MB Command MBX_ASYNCEVT_ENABLE (0x33) */ + +typedef struct { +#ifdef __BIG_ENDIAN_BITFIELD + uint32_t rsvd:30; + uint32_t ring:2; /* Ring for ASYNC_EVENT iocb Bits 0-1*/ +#else /* __LITTLE_ENDIAN */ + uint32_t ring:2; /* Ring for ASYNC_EVENT iocb Bits 0-1*/ + uint32_t rsvd:30; +#endif +} ASYNCEVT_ENABLE_VAR; + /* Union of all Mailbox Command types */ #define MAILBOX_CMD_WSIZE 32 #define MAILBOX_CMD_SIZE (MAILBOX_CMD_WSIZE * sizeof(uint32_t)) @@ -2645,6 +2662,7 @@ typedef union { CONFIG_PORT_VAR varCfgPort; /* cmd = 0x88 (CONFIG_PORT) */ REG_VPI_VAR varRegVpi; /* cmd = 0x96 (REG_VPI) */ UNREG_VPI_VAR varUnregVpi; /* cmd = 0x97 (UNREG_VPI) */ + ASYNCEVT_ENABLE_VAR varCfgAsyncEvent; /*cmd = x33 (CONFIG_ASYNC) */ } MAILVARIANTS; /* @@ -2987,6 +3005,21 @@ typedef struct { uint32_t fcpt_Length; /* transfer ready for IWRITE */ } FCPT_FIELDS64; +/* IOCB Command template for Async Status iocb commands */ +typedef struct { + uint32_t rsvd[4]; + uint32_t param; +#ifdef __BIG_ENDIAN_BITFIELD + uint16_t evt_code; /* High order bits word 5 */ + uint16_t sub_ctxt_tag; /* Low order bits word 5 */ +#else /* __LITTLE_ENDIAN_BITFIELD */ + uint16_t sub_ctxt_tag; /* High order bits word 5 */ + uint16_t evt_code; /* Low order bits word 5 */ +#endif +} ASYNCSTAT_FIELDS; +#define ASYNC_TEMP_WARN 0x100 +#define ASYNC_TEMP_SAFE 0x101 + /* IOCB Command template for CMD_IOCB_RCV_ELS64_CX (0xB7) or CMD_IOCB_RCV_SEQ64_CX (0xB5) */ @@ -3028,6 +3061,7 @@ typedef struct _IOCB { /* IOCB structure */ XMT_SEQ_FIELDS64 xseq64; /* XMIT / BCAST cmd */ FCPI_FIELDS64 fcpi64; /* FCP 64 bit Initiator template */ FCPT_FIELDS64 fcpt64; /* FCP 64 bit target template */ + ASYNCSTAT_FIELDS asyncstat; /* async_status iocb */ uint32_t ulpWord[IOCB_WORD_SZ - 2]; /* generic 6 'words' */ } un; diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index ecebdfa00470..17f445478beb 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -212,6 +212,18 @@ out_free_mbox: return 0; } +/* Completion handler for config async event mailbox command. */ +static void +lpfc_config_async_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq) +{ + if (pmboxq->mb.mbxStatus == MBX_SUCCESS) + phba->temp_sensor_support = 1; + else + phba->temp_sensor_support = 0; + mempool_free(pmboxq, phba->mbox_mem_pool); + return; +} + /************************************************************************/ /* */ /* lpfc_config_port_post */ @@ -409,7 +421,21 @@ lpfc_config_port_post(struct lpfc_hba *phba) return -EIO; } /* MBOX buffer will be freed in mbox compl */ + pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + lpfc_config_async(phba, pmb, LPFC_ELS_RING); + pmb->mbox_cmpl = lpfc_config_async_cmpl; + pmb->vport = phba->pport; + rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT); + if ((rc != MBX_BUSY) && (rc != MBX_SUCCESS)) { + lpfc_printf_log(phba, + KERN_ERR, + LOG_INIT, + "0456 Adapter failed to issue " + "ASYNCEVT_ENABLE mbox status x%x \n.", + rc); + mempool_free(pmb, phba->mbox_mem_pool); + } return (0); } @@ -601,6 +627,8 @@ lpfc_handle_eratt(struct lpfc_hba *phba) struct lpfc_sli_ring *pring; struct lpfc_vport **vports; uint32_t event_data; + unsigned long temperature; + struct temp_event temp_event_data; struct Scsi_Host *shost; int i; @@ -655,6 +683,33 @@ lpfc_handle_eratt(struct lpfc_hba *phba) return; } lpfc_unblock_mgmt_io(phba); + } else if (phba->work_hs & HS_CRIT_TEMP) { + temperature = readl(phba->MBslimaddr + TEMPERATURE_OFFSET); + temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT; + temp_event_data.event_code = LPFC_CRIT_TEMP; + temp_event_data.data = (uint32_t)temperature; + + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0459 Adapter maximum temperature exceeded " + "(%ld), taking this port offline " + "Data: x%x x%x x%x\n", + temperature, phba->work_hs, + phba->work_status[0], phba->work_status[1]); + + shost = lpfc_shost_from_vport(phba->pport); + fc_host_post_vendor_event(shost, fc_get_event_number(), + sizeof(temp_event_data), + (char *) &temp_event_data, + SCSI_NL_VID_TYPE_PCI + | PCI_VENDOR_ID_EMULEX); + + psli->sli_flag &= ~LPFC_SLI2_ACTIVE; + lpfc_offline_prep(phba); + lpfc_offline(phba); + lpfc_unblock_mgmt_io(phba); + phba->link_state = LPFC_HBA_ERROR; + lpfc_hba_down_post(phba); + } else { /* The if clause above forces this code path when the status * failure is a value other than FFER6. Do not call the offline diff --git a/drivers/scsi/lpfc/lpfc_logmsg.h b/drivers/scsi/lpfc/lpfc_logmsg.h index 626e4d878725..c5841d7565f7 100644 --- a/drivers/scsi/lpfc/lpfc_logmsg.h +++ b/drivers/scsi/lpfc/lpfc_logmsg.h @@ -26,6 +26,7 @@ #define LOG_IP 0x20 /* IP traffic history */ #define LOG_FCP 0x40 /* FCP traffic history */ #define LOG_NODE 0x80 /* Node table events */ +#define LOG_TEMP 0x100 /* Temperature sensor events */ #define LOG_MISC 0x400 /* Miscellaneous events */ #define LOG_SLI 0x800 /* SLI events */ #define LOG_FCP_ERROR 0x1000 /* log errors, not underruns */ diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index a592733664e9..7256be3f4e2f 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -81,6 +81,24 @@ lpfc_read_nv(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb) return; } +/**********************************************/ +/* lpfc_config_async Issue a */ +/* MBX_ASYNC_EVT_ENABLE mailbox command */ +/**********************************************/ +void +lpfc_config_async(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, + uint32_t ring) +{ + MAILBOX_t *mb; + + mb = &pmb->mb; + memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); + mb->mbxCommand = MBX_ASYNCEVT_ENABLE; + mb->un.varCfgAsyncEvent.ring = ring; + mb->mbxOwner = OWN_HOST; + return; +} + /**********************************************/ /* lpfc_heart_beat Issue a HEART_BEAT */ /* mailbox command */ diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index ce348c5c706c..41f13a300ba5 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -199,6 +199,7 @@ lpfc_sli_iocb_cmd_type(uint8_t iocb_cmnd) case CMD_RCV_ELS_REQ_CX: case CMD_RCV_SEQUENCE64_CX: case CMD_RCV_ELS_REQ64_CX: + case CMD_ASYNC_STATUS: case CMD_IOCB_RCV_SEQ64_CX: case CMD_IOCB_RCV_ELS64_CX: case CMD_IOCB_RCV_CONT64_CX: @@ -754,6 +755,7 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand) case MBX_FLASH_WR_ULA: case MBX_SET_DEBUG: case MBX_LOAD_EXP_ROM: + case MBX_ASYNCEVT_ENABLE: case MBX_REG_VPI: case MBX_UNREG_VPI: case MBX_HEARTBEAT: @@ -953,6 +955,7 @@ lpfc_sli_replace_hbqbuff(struct lpfc_hba *phba, uint32_t tag) return &new_hbq_entry->dbuf; } + static int lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_iocbq *saveq) @@ -964,6 +967,22 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, match = 0; irsp = &(saveq->iocb); + + if (irsp->ulpCommand == CMD_ASYNC_STATUS) { + if (pring->lpfc_sli_rcv_async_status) + pring->lpfc_sli_rcv_async_status(phba, pring, saveq); + else + lpfc_printf_log(phba, + KERN_WARNING, + LOG_SLI, + "0316 Ring %d handler: unexpected " + "ASYNC_STATUS iocb received evt_code " + "0x%x\n", + pring->ringno, + irsp->un.asyncstat.evt_code); + return 1; + } + if ((irsp->ulpCommand == CMD_RCV_ELS_REQ64_CX) || (irsp->ulpCommand == CMD_RCV_ELS_REQ_CX) || (irsp->ulpCommand == CMD_IOCB_RCV_ELS64_CX) @@ -2993,6 +3012,61 @@ lpfc_extra_ring_setup( struct lpfc_hba *phba) return 0; } +void +lpfc_sli_async_event_handler(struct lpfc_hba * phba, + struct lpfc_sli_ring * pring, struct lpfc_iocbq * iocbq) +{ + IOCB_t *icmd; + uint16_t evt_code; + uint16_t temp; + struct temp_event temp_event_data; + struct Scsi_Host *shost; + + icmd = &iocbq->iocb; + evt_code = icmd->un.asyncstat.evt_code; + temp = icmd->ulpContext; + + if ((evt_code != ASYNC_TEMP_WARN) && + (evt_code != ASYNC_TEMP_SAFE)) { + lpfc_printf_log(phba, + KERN_ERR, + LOG_SLI, + "0327 Ring %d handler: unexpected ASYNC_STATUS" + " evt_code 0x%x\n", + pring->ringno, + icmd->un.asyncstat.evt_code); + return; + } + temp_event_data.data = (uint32_t)temp; + temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT; + if (evt_code == ASYNC_TEMP_WARN) { + temp_event_data.event_code = LPFC_THRESHOLD_TEMP; + lpfc_printf_log(phba, + KERN_WARNING, + LOG_TEMP, + "0339 Adapter is very hot, please take " + "corrective action. temperature : %d Celsius\n", + temp); + } + if (evt_code == ASYNC_TEMP_SAFE) { + temp_event_data.event_code = LPFC_NORMAL_TEMP; + lpfc_printf_log(phba, + KERN_INFO, + LOG_TEMP, + "0340 Adapter temperature is OK now. " + "temperature : %d Celsius\n", + temp); + } + + /* Send temperature change event to applications */ + shost = lpfc_shost_from_vport(phba->pport); + fc_host_post_vendor_event(shost, fc_get_event_number(), + sizeof(temp_event_data), (char *) &temp_event_data, + SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX); + +} + + int lpfc_sli_setup(struct lpfc_hba *phba) { @@ -3059,6 +3133,8 @@ lpfc_sli_setup(struct lpfc_hba *phba) pring->fast_iotag = 0; pring->iotag_ctr = 0; pring->iotag_max = 4096; + pring->lpfc_sli_rcv_async_status = + lpfc_sli_async_event_handler; pring->num_mask = 4; pring->prt[0].profile = 0; /* Mask 0 */ pring->prt[0].rctl = FC_ELS_REQ; diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h index 51b2b6b949be..8b1fe2f62d84 100644 --- a/drivers/scsi/lpfc/lpfc_sli.h +++ b/drivers/scsi/lpfc/lpfc_sli.h @@ -166,6 +166,8 @@ struct lpfc_sli_ring { struct lpfc_sli_ring_mask prt[LPFC_MAX_RING_MASK]; uint32_t num_mask; /* number of mask entries in prt array */ + void (*lpfc_sli_rcv_async_status) (struct lpfc_hba *, + struct lpfc_sli_ring *, struct lpfc_iocbq *); struct lpfc_sli_ring_stat stats; /* SLI statistical info */ -- cgit v1.2.3-59-g8ed1b From 7ee5d43e2ea25336a7638715420c75583bd2ed69 Mon Sep 17 00:00:00 2001 From: James Smart Date: Sat, 27 Oct 2007 13:37:17 -0400 Subject: [SCSI] lpfc 8.2.3 : NPIV bug fixes NPIV bug fixes: - Remove vport params on physical hba when npiv is disabled - Implement new DA_ID CT command to remove vport information from the switch after delete. Some switches didn't clean this up unless the physical link dropped. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 9 ++++- drivers/scsi/lpfc/lpfc_attr.c | 81 +++++++++++------------------------------- drivers/scsi/lpfc/lpfc_crtn.h | 2 +- drivers/scsi/lpfc/lpfc_ct.c | 76 ++++++++++++++++++++++++++++++++------- drivers/scsi/lpfc/lpfc_hw.h | 5 +++ drivers/scsi/lpfc/lpfc_init.c | 21 ++++++++--- drivers/scsi/lpfc/lpfc_vport.c | 14 ++++++-- 7 files changed, 127 insertions(+), 81 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index c1343fb2fcf4..ff6b7d33ccab 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -272,10 +272,16 @@ struct lpfc_vport { #define FC_ABORT_DISCOVERY 0x8000 /* we want to abort discovery */ #define FC_NDISC_ACTIVE 0x10000 /* NPort discovery active */ #define FC_BYPASSED_MODE 0x20000 /* NPort is in bypassed mode */ -#define FC_RFF_NOT_SUPPORTED 0x40000 /* RFF_ID was rejected by switch */ #define FC_VPORT_NEEDS_REG_VPI 0x80000 /* Needs to have its vpi registered */ #define FC_RSCN_DEFERRED 0x100000 /* A deferred RSCN being processed */ + uint32_t ct_flags; +#define FC_CT_RFF_ID 0x1 /* RFF_ID accepted by switch */ +#define FC_CT_RNN_ID 0x2 /* RNN_ID accepted by switch */ +#define FC_CT_RSNN_NN 0x4 /* RSNN_NN accepted by switch */ +#define FC_CT_RSPN_ID 0x8 /* RSPN_ID accepted by switch */ +#define FC_CT_RFT_ID 0x10 /* RFT_ID accepted by switch */ + struct list_head fc_nodes; /* Keep counters for the number of entries in each list. */ @@ -344,6 +350,7 @@ struct lpfc_vport { uint32_t cfg_discovery_threads; uint32_t cfg_log_verbose; uint32_t cfg_max_luns; + uint32_t cfg_enable_da_id; uint32_t dev_loss_tmo_changed; diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index bd35e9c7b995..356dede9cd65 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -1113,7 +1113,13 @@ MODULE_PARM_DESC(lpfc_sli_mode, "SLI mode selector:" " 2 - select SLI-2 even on SLI-3 capable HBAs," " 3 - select SLI-3"); -LPFC_ATTR_R(enable_npiv, 0, 0, 1, "Enable NPIV functionality"); +int lpfc_enable_npiv = 0; +module_param(lpfc_enable_npiv, int, 0); +MODULE_PARM_DESC(lpfc_enable_npiv, "Enable NPIV functionality"); +lpfc_param_show(enable_npiv); +lpfc_param_init(enable_npiv, 0, 0, 1); +static CLASS_DEVICE_ATTR(lpfc_enable_npiv, S_IRUGO, + lpfc_enable_npiv_show, NULL); /* # lpfc_nodev_tmo: If set, it will hold all I/O errors on devices that disappear @@ -1258,6 +1264,13 @@ static CLASS_DEVICE_ATTR(lpfc_devloss_tmo, S_IRUGO | S_IWUSR, LPFC_VPORT_ATTR_HEX_RW(log_verbose, 0x0, 0x0, 0xffff, "Verbose logging bit-mask"); +/* +# lpfc_enable_da_id: This turns on the DA_ID CT command that deregisters +# objects that have been registered with the nameserver after login. +*/ +LPFC_VPORT_ATTR_R(enable_da_id, 0, 0, 1, + "Deregister nameserver objects before LOGO"); + /* # lun_queue_depth: This parameter is used to limit the number of outstanding # commands per FCP LUN. Value range is [1,128]. Default value is 30. @@ -1564,6 +1577,7 @@ struct class_device_attribute *lpfc_vport_attrs[] = { &class_device_attr_lpfc_max_luns, &class_device_attr_nport_evt_cnt, &class_device_attr_npiv_info, + &class_device_attr_lpfc_enable_da_id, NULL, }; @@ -2349,69 +2363,13 @@ struct fc_function_template lpfc_transport_functions = { .dev_loss_tmo_callbk = lpfc_dev_loss_tmo_callbk, .terminate_rport_io = lpfc_terminate_rport_io, - .vport_create = lpfc_vport_create, - .vport_delete = lpfc_vport_delete, + /* Vport fields are filled in at runtime based on enable_npiv */ + .vport_create = NULL, + .vport_delete = NULL, + .vport_disable = NULL, .dd_fcvport_size = sizeof(struct lpfc_vport *), }; -struct fc_function_template lpfc_vport_transport_functions = { - /* fixed attributes the driver supports */ - .show_host_node_name = 1, - .show_host_port_name = 1, - .show_host_supported_classes = 1, - .show_host_supported_fc4s = 1, - .show_host_supported_speeds = 1, - .show_host_maxframe_size = 1, - - /* dynamic attributes the driver supports */ - .get_host_port_id = lpfc_get_host_port_id, - .show_host_port_id = 1, - - .get_host_port_type = lpfc_get_host_port_type, - .show_host_port_type = 1, - - .get_host_port_state = lpfc_get_host_port_state, - .show_host_port_state = 1, - - /* active_fc4s is shown but doesn't change (thus no get function) */ - .show_host_active_fc4s = 1, - - .get_host_speed = lpfc_get_host_speed, - .show_host_speed = 1, - - .get_host_fabric_name = lpfc_get_host_fabric_name, - .show_host_fabric_name = 1, - - /* - * The LPFC driver treats linkdown handling as target loss events - * so there are no sysfs handlers for link_down_tmo. - */ - - .get_fc_host_stats = lpfc_get_stats, - .reset_fc_host_stats = lpfc_reset_stats, - - .dd_fcrport_size = sizeof(struct lpfc_rport_data), - .show_rport_maxframe_size = 1, - .show_rport_supported_classes = 1, - - .set_rport_dev_loss_tmo = lpfc_set_rport_loss_tmo, - .show_rport_dev_loss_tmo = 1, - - .get_starget_port_id = lpfc_get_starget_port_id, - .show_starget_port_id = 1, - - .get_starget_node_name = lpfc_get_starget_node_name, - .show_starget_node_name = 1, - - .get_starget_port_name = lpfc_get_starget_port_name, - .show_starget_port_name = 1, - - .dev_loss_tmo_callbk = lpfc_dev_loss_tmo_callbk, - .terminate_rport_io = lpfc_terminate_rport_io, - - .vport_disable = lpfc_vport_disable, -}; - void lpfc_get_cfgparam(struct lpfc_hba *phba) { @@ -2460,5 +2418,6 @@ lpfc_get_vport_cfgparam(struct lpfc_vport *vport) lpfc_discovery_threads_init(vport, lpfc_discovery_threads); lpfc_max_luns_init(vport, lpfc_max_luns); lpfc_scan_down_init(vport, lpfc_scan_down); + lpfc_enable_da_id_init(vport, lpfc_enable_da_id); return; } diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index f3916645e817..be4b6584167a 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -260,8 +260,8 @@ extern struct class_device_attribute *lpfc_vport_attrs[]; extern struct scsi_host_template lpfc_template; extern struct scsi_host_template lpfc_vport_template; extern struct fc_function_template lpfc_transport_functions; -extern struct fc_function_template lpfc_vport_transport_functions; extern int lpfc_sli_mode; +extern int lpfc_enable_npiv; int lpfc_vport_symbolic_node_name(struct lpfc_vport *, char *, size_t); void lpfc_terminate_rport_io(struct fc_rport *); diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c index c701e4d611a9..dbe020e66b09 100644 --- a/drivers/scsi/lpfc/lpfc_ct.c +++ b/drivers/scsi/lpfc/lpfc_ct.c @@ -458,7 +458,7 @@ lpfc_ns_rsp(struct lpfc_vport *vport, struct lpfc_dmabuf *mp, uint32_t Size) ((lpfc_find_vport_by_did(phba, Did) == NULL) || vport->cfg_peer_port_login)) { if ((vport->port_type != LPFC_NPIV_PORT) || - (vport->fc_flag & FC_RFF_NOT_SUPPORTED) || + (!vport->ct_flags & FC_CT_RFF_ID) || (!vport->cfg_restrict_login)) { ndlp = lpfc_setup_disc_node(vport, Did); if (ndlp) { @@ -778,8 +778,8 @@ out: static void -lpfc_cmpl_ct_cmd_rft_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, - struct lpfc_iocbq *rspiocb) +lpfc_cmpl_ct(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, + struct lpfc_iocbq *rspiocb) { struct lpfc_vport *vport = cmdiocb->vport; struct lpfc_dmabuf *inp; @@ -809,7 +809,7 @@ lpfc_cmpl_ct_cmd_rft_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, /* RFT request completes status CmdRsp */ lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, - "0209 RFT request completes, latt %d, " + "0209 CT Request completes, latt %d, " "ulpStatus x%x CmdRsp x%x, Context x%x, Tag x%x\n", latt, irsp->ulpStatus, CTrsp->CommandResponse.bits.CmdRsp, @@ -847,11 +847,29 @@ out: return; } +static void +lpfc_cmpl_ct_cmd_rft_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, + struct lpfc_iocbq *rspiocb) +{ + IOCB_t *irsp = &rspiocb->iocb; + struct lpfc_vport *vport = cmdiocb->vport; + + if (irsp->ulpStatus == IOSTAT_SUCCESS) + vport->ct_flags |= FC_CT_RFT_ID; + lpfc_cmpl_ct(phba, cmdiocb, rspiocb); + return; +} + static void lpfc_cmpl_ct_cmd_rnn_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) { - lpfc_cmpl_ct_cmd_rft_id(phba, cmdiocb, rspiocb); + IOCB_t *irsp = &rspiocb->iocb; + struct lpfc_vport *vport = cmdiocb->vport; + + if (irsp->ulpStatus == IOSTAT_SUCCESS) + vport->ct_flags |= FC_CT_RNN_ID; + lpfc_cmpl_ct(phba, cmdiocb, rspiocb); return; } @@ -859,7 +877,12 @@ static void lpfc_cmpl_ct_cmd_rspn_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) { - lpfc_cmpl_ct_cmd_rft_id(phba, cmdiocb, rspiocb); + IOCB_t *irsp = &rspiocb->iocb; + struct lpfc_vport *vport = cmdiocb->vport; + + if (irsp->ulpStatus == IOSTAT_SUCCESS) + vport->ct_flags |= FC_CT_RSPN_ID; + lpfc_cmpl_ct(phba, cmdiocb, rspiocb); return; } @@ -867,7 +890,24 @@ static void lpfc_cmpl_ct_cmd_rsnn_nn(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) { - lpfc_cmpl_ct_cmd_rft_id(phba, cmdiocb, rspiocb); + IOCB_t *irsp = &rspiocb->iocb; + struct lpfc_vport *vport = cmdiocb->vport; + + if (irsp->ulpStatus == IOSTAT_SUCCESS) + vport->ct_flags |= FC_CT_RSNN_NN; + lpfc_cmpl_ct(phba, cmdiocb, rspiocb); + return; +} + +static void +lpfc_cmpl_ct_cmd_da_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, + struct lpfc_iocbq *rspiocb) +{ + struct lpfc_vport *vport = cmdiocb->vport; + + /* even if it fails we will act as though it succeeded. */ + vport->ct_flags = 0; + lpfc_cmpl_ct(phba, cmdiocb, rspiocb); return; } @@ -878,10 +918,9 @@ lpfc_cmpl_ct_cmd_rff_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, IOCB_t *irsp = &rspiocb->iocb; struct lpfc_vport *vport = cmdiocb->vport; - if (irsp->ulpStatus != IOSTAT_SUCCESS) - vport->fc_flag |= FC_RFF_NOT_SUPPORTED; - - lpfc_cmpl_ct_cmd_rft_id(phba, cmdiocb, rspiocb); + if (irsp->ulpStatus == IOSTAT_SUCCESS) + vport->ct_flags |= FC_CT_RFF_ID; + lpfc_cmpl_ct(phba, cmdiocb, rspiocb); return; } @@ -1001,6 +1040,8 @@ lpfc_ns_cmd(struct lpfc_vport *vport, int cmdcode, bpl->tus.f.bdeSize = RSPN_REQUEST_SZ; else if (cmdcode == SLI_CTNS_RSNN_NN) bpl->tus.f.bdeSize = RSNN_REQUEST_SZ; + else if (cmdcode == SLI_CTNS_DA_ID) + bpl->tus.f.bdeSize = DA_ID_REQUEST_SZ; else if (cmdcode == SLI_CTNS_RFF_ID) bpl->tus.f.bdeSize = RFF_REQUEST_SZ; else @@ -1034,6 +1075,7 @@ lpfc_ns_cmd(struct lpfc_vport *vport, int cmdcode, break; case SLI_CTNS_RFT_ID: + vport->ct_flags &= ~FC_CT_RFT_ID; CtReq->CommandResponse.bits.CmdRsp = be16_to_cpu(SLI_CTNS_RFT_ID); CtReq->un.rft.PortId = be32_to_cpu(vport->fc_myDID); @@ -1042,6 +1084,7 @@ lpfc_ns_cmd(struct lpfc_vport *vport, int cmdcode, break; case SLI_CTNS_RNN_ID: + vport->ct_flags &= ~FC_CT_RNN_ID; CtReq->CommandResponse.bits.CmdRsp = be16_to_cpu(SLI_CTNS_RNN_ID); CtReq->un.rnn.PortId = be32_to_cpu(vport->fc_myDID); @@ -1051,6 +1094,7 @@ lpfc_ns_cmd(struct lpfc_vport *vport, int cmdcode, break; case SLI_CTNS_RSPN_ID: + vport->ct_flags &= ~FC_CT_RSPN_ID; CtReq->CommandResponse.bits.CmdRsp = be16_to_cpu(SLI_CTNS_RSPN_ID); CtReq->un.rspn.PortId = be32_to_cpu(vport->fc_myDID); @@ -1061,6 +1105,7 @@ lpfc_ns_cmd(struct lpfc_vport *vport, int cmdcode, cmpl = lpfc_cmpl_ct_cmd_rspn_id; break; case SLI_CTNS_RSNN_NN: + vport->ct_flags &= ~FC_CT_RSNN_NN; CtReq->CommandResponse.bits.CmdRsp = be16_to_cpu(SLI_CTNS_RSNN_NN); memcpy(CtReq->un.rsnn.wwnn, &vport->fc_nodename, @@ -1071,8 +1116,15 @@ lpfc_ns_cmd(struct lpfc_vport *vport, int cmdcode, CtReq->un.rsnn.symbname, size); cmpl = lpfc_cmpl_ct_cmd_rsnn_nn; break; + case SLI_CTNS_DA_ID: + /* Implement DA_ID Nameserver request */ + CtReq->CommandResponse.bits.CmdRsp = + be16_to_cpu(SLI_CTNS_DA_ID); + CtReq->un.da_id.port_id = be32_to_cpu(vport->fc_myDID); + cmpl = lpfc_cmpl_ct_cmd_da_id; + break; case SLI_CTNS_RFF_ID: - vport->fc_flag &= ~FC_RFF_NOT_SUPPORTED; + vport->ct_flags &= ~FC_CT_RFF_ID; CtReq->CommandResponse.bits.CmdRsp = be16_to_cpu(SLI_CTNS_RFF_ID); CtReq->un.rff.PortId = be32_to_cpu(vport->fc_myDID);; diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index 098dd022a7eb..b075d5956488 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -139,6 +139,9 @@ struct lpfc_sli_ct_request { uint8_t len; uint8_t symbname[255]; } rsnn; + struct da_id { /* For DA_ID requests */ + uint32_t port_id; + } da_id; struct rspn { /* For RSPN_ID requests */ uint32_t PortId; uint8_t len; @@ -177,6 +180,8 @@ struct lpfc_sli_ct_request { sizeof(struct rnn)) #define RSNN_REQUEST_SZ (offsetof(struct lpfc_sli_ct_request, un) + \ sizeof(struct rsnn)) +#define DA_ID_REQUEST_SZ (offsetof(struct lpfc_sli_ct_request, un) + \ + sizeof(struct da_id)) #define RSPN_REQUEST_SZ (offsetof(struct lpfc_sli_ct_request, un) + \ sizeof(struct rspn)) diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 17f445478beb..86c2f2b15b68 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -2294,12 +2294,24 @@ lpfc_init(void) printk(LPFC_MODULE_DESC "\n"); printk(LPFC_COPYRIGHT "\n"); + if (lpfc_enable_npiv) { + lpfc_transport_functions.vport_create = lpfc_vport_create; + lpfc_transport_functions.vport_delete = lpfc_vport_delete; + } lpfc_transport_template = fc_attach_transport(&lpfc_transport_functions); - lpfc_vport_transport_template = - fc_attach_transport(&lpfc_vport_transport_functions); - if (!lpfc_transport_template || !lpfc_vport_transport_template) + if (lpfc_transport_template == NULL) return -ENOMEM; + if (lpfc_enable_npiv) { + lpfc_transport_functions.vport_create = NULL; + lpfc_transport_functions.vport_delete = NULL; + lpfc_transport_functions.issue_fc_host_lip = NULL; + lpfc_transport_functions.vport_disable = lpfc_vport_disable; + lpfc_vport_transport_template = + fc_attach_transport(&lpfc_transport_functions); + if (lpfc_vport_transport_template == NULL) + return -ENOMEM; + } error = pci_register_driver(&lpfc_driver); if (error) { fc_release_transport(lpfc_transport_template); @@ -2314,7 +2326,8 @@ lpfc_exit(void) { pci_unregister_driver(&lpfc_driver); fc_release_transport(lpfc_transport_template); - fc_release_transport(lpfc_vport_transport_template); + if (lpfc_enable_npiv) + fc_release_transport(lpfc_vport_transport_template); } module_init(lpfc_init); diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c index dcb415e717c3..3b705ccc771a 100644 --- a/drivers/scsi/lpfc/lpfc_vport.c +++ b/drivers/scsi/lpfc/lpfc_vport.c @@ -482,8 +482,18 @@ lpfc_vport_delete(struct fc_vport *fc_vport) ndlp = lpfc_findnode_did(phba->pport, Fabric_DID); if (ndlp && ndlp->nlp_state == NLP_STE_UNMAPPED_NODE && - phba->link_state >= LPFC_LINK_UP) { - + phba->link_state >= LPFC_LINK_UP) { + if (vport->cfg_enable_da_id) { + timeout = msecs_to_jiffies(phba->fc_ratov * 2000); + if (!lpfc_ns_cmd(vport, SLI_CTNS_DA_ID, 0, 0)) + while (vport->ct_flags && timeout) + timeout = schedule_timeout(timeout); + else + lpfc_printf_log(vport->phba, KERN_WARNING, + LOG_VPORT, + "1829 CT command failed to " + "delete objects on fabric. \n"); + } /* First look for the Fabric ndlp */ ndlp = lpfc_findnode_did(vport, Fabric_DID); if (!ndlp) { -- cgit v1.2.3-59-g8ed1b From 0b727fea7a700e223bf52fb1eaf4c3a27c4340db Mon Sep 17 00:00:00 2001 From: James Smart Date: Sat, 27 Oct 2007 13:37:25 -0400 Subject: [SCSI] lpfc 8.2.3 : Remove flawed MBX_STOP_IOCB logic Remove flawed MBX_STOP_IOCB logic Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_els.c | 20 +++++------ drivers/scsi/lpfc/lpfc_hbadisc.c | 33 +++++++----------- drivers/scsi/lpfc/lpfc_init.c | 4 +-- drivers/scsi/lpfc/lpfc_nportdisc.c | 6 ++-- drivers/scsi/lpfc/lpfc_sli.c | 69 ++------------------------------------ drivers/scsi/lpfc/lpfc_sli.h | 4 --- 6 files changed, 27 insertions(+), 109 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 8085900635d4..b73612d4fc53 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -249,7 +249,7 @@ lpfc_issue_fabric_reglogin(struct lpfc_vport *vport) mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; mbox->vport = vport; - rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT | MBX_STOP_IOCB); + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); if (rc == MBX_NOT_FINISHED) goto fail_free_mbox; @@ -265,7 +265,7 @@ lpfc_issue_fabric_reglogin(struct lpfc_vport *vport) mbox->vport = vport; mbox->context2 = lpfc_nlp_get(ndlp); - rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT | MBX_STOP_IOCB); + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); if (rc == MBX_NOT_FINISHED) goto fail_issue_reg_login; @@ -429,8 +429,7 @@ lpfc_cmpl_els_flogi_nport(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; mbox->vport = vport; - rc = lpfc_sli_issue_mbox(phba, mbox, - MBX_NOWAIT | MBX_STOP_IOCB); + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); if (rc == MBX_NOT_FINISHED) { mempool_free(mbox, phba->mbox_mem_pool); goto fail; @@ -2150,8 +2149,7 @@ lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, lpfc_nlp_set_state(vport, ndlp, NLP_STE_REG_LOGIN_ISSUE); } - if (lpfc_sli_issue_mbox(phba, mbox, - (MBX_NOWAIT | MBX_STOP_IOCB)) + if (lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT) != MBX_NOT_FINISHED) { goto out; } @@ -3022,8 +3020,7 @@ lpfc_els_rcv_flogi(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, mbox->mb.un.varInitLnk.lipsr_AL_PA = 0; mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; mbox->vport = vport; - rc = lpfc_sli_issue_mbox - (phba, mbox, (MBX_NOWAIT | MBX_STOP_IOCB)); + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); lpfc_set_loopback_flag(phba); if (rc == MBX_NOT_FINISHED) { mempool_free(mbox, phba->mbox_mem_pool); @@ -3223,8 +3220,8 @@ lpfc_els_rcv_rps(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, mbox->context2 = lpfc_nlp_get(ndlp); mbox->vport = vport; mbox->mbox_cmpl = lpfc_els_rsp_rps_acc; - if (lpfc_sli_issue_mbox (phba, mbox, - (MBX_NOWAIT | MBX_STOP_IOCB)) != MBX_NOT_FINISHED) + if (lpfc_sli_issue_mbox (phba, mbox, MBX_NOWAIT) + != MBX_NOT_FINISHED) /* Mbox completion will send ELS Response */ return 0; @@ -4162,8 +4159,7 @@ lpfc_register_new_vport(struct lpfc_hba *phba, struct lpfc_vport *vport, mbox->vport = vport; mbox->context2 = lpfc_nlp_get(ndlp); mbox->mbox_cmpl = lpfc_cmpl_reg_new_vport; - if (lpfc_sli_issue_mbox(phba, mbox, - MBX_NOWAIT | MBX_STOP_IOCB) + if (lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT) == MBX_NOT_FINISHED) { mempool_free(mbox, phba->mbox_mem_pool); vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI; diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index c81c2b3228d6..6f5bf8189950 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -412,7 +412,7 @@ lpfc_work_done(struct lpfc_hba *phba) status >>= (4*LPFC_ELS_RING); if ((status & HA_RXMASK) || (pring->flag & LPFC_DEFERRED_RING_EVENT)) { - if (pring->flag & LPFC_STOP_IOCB_MASK) { + if (pring->flag & LPFC_STOP_IOCB_EVENT) { pring->flag |= LPFC_DEFERRED_RING_EVENT; } else { lpfc_sli_handle_slow_ring_event(phba, pring, @@ -629,7 +629,7 @@ lpfc_linkdown(struct lpfc_hba *phba) lpfc_unreg_did(phba, 0xffff, 0xffffffff, mb); mb->vport = vport; mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; - if (lpfc_sli_issue_mbox(phba, mb, (MBX_NOWAIT | MBX_STOP_IOCB)) + if (lpfc_sli_issue_mbox(phba, mb, MBX_NOWAIT) == MBX_NOT_FINISHED) { mempool_free(mb, phba->mbox_mem_pool); } @@ -643,8 +643,7 @@ lpfc_linkdown(struct lpfc_hba *phba) lpfc_config_link(phba, mb); mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; mb->vport = vport; - if (lpfc_sli_issue_mbox(phba, mb, - (MBX_NOWAIT | MBX_STOP_IOCB)) + if (lpfc_sli_issue_mbox(phba, mb, MBX_NOWAIT) == MBX_NOT_FINISHED) { mempool_free(mb, phba->mbox_mem_pool); } @@ -1022,8 +1021,7 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la) lpfc_read_sparam(phba, sparam_mbox, 0); sparam_mbox->vport = vport; sparam_mbox->mbox_cmpl = lpfc_mbx_cmpl_read_sparam; - rc = lpfc_sli_issue_mbox(phba, sparam_mbox, - (MBX_NOWAIT | MBX_STOP_IOCB)); + rc = lpfc_sli_issue_mbox(phba, sparam_mbox, MBX_NOWAIT); if (rc == MBX_NOT_FINISHED) { mp = (struct lpfc_dmabuf *) sparam_mbox->context1; lpfc_mbuf_free(phba, mp->virt, mp->phys); @@ -1040,8 +1038,7 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la) lpfc_config_link(phba, cfglink_mbox); cfglink_mbox->vport = vport; cfglink_mbox->mbox_cmpl = lpfc_mbx_cmpl_local_config_link; - rc = lpfc_sli_issue_mbox(phba, cfglink_mbox, - (MBX_NOWAIT | MBX_STOP_IOCB)); + rc = lpfc_sli_issue_mbox(phba, cfglink_mbox, MBX_NOWAIT); if (rc != MBX_NOT_FINISHED) return; mempool_free(cfglink_mbox, phba->mbox_mem_pool); @@ -1219,7 +1216,7 @@ lpfc_mbx_unreg_vpi(struct lpfc_vport *vport) lpfc_unreg_vpi(phba, vport->vpi, mbox); mbox->vport = vport; mbox->mbox_cmpl = lpfc_mbx_cmpl_unreg_vpi; - rc = lpfc_sli_issue_mbox(phba, mbox, (MBX_NOWAIT | MBX_STOP_IOCB)); + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); if (rc == MBX_NOT_FINISHED) { lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT, "1800 Could not issue unreg_vpi\n"); @@ -1868,8 +1865,7 @@ lpfc_unreg_rpi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) lpfc_unreg_login(phba, vport->vpi, ndlp->nlp_rpi, mbox); mbox->vport = vport; mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; - rc = lpfc_sli_issue_mbox(phba, mbox, - (MBX_NOWAIT | MBX_STOP_IOCB)); + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); if (rc == MBX_NOT_FINISHED) mempool_free(mbox, phba->mbox_mem_pool); } @@ -1892,8 +1888,7 @@ lpfc_unreg_all_rpis(struct lpfc_vport *vport) lpfc_unreg_login(phba, vport->vpi, 0xffff, mbox); mbox->vport = vport; mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; - rc = lpfc_sli_issue_mbox(phba, mbox, - (MBX_NOWAIT | MBX_STOP_IOCB)); + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); if (rc == MBX_NOT_FINISHED) { mempool_free(mbox, phba->mbox_mem_pool); } @@ -1912,8 +1907,7 @@ lpfc_unreg_default_rpis(struct lpfc_vport *vport) lpfc_unreg_did(phba, vport->vpi, 0xffffffff, mbox); mbox->vport = vport; mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; - rc = lpfc_sli_issue_mbox(phba, mbox, - (MBX_NOWAIT | MBX_STOP_IOCB)); + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); if (rc == MBX_NOT_FINISHED) { lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT, "1815 Could not issue " @@ -2220,8 +2214,7 @@ lpfc_issue_clear_la(struct lpfc_hba *phba, struct lpfc_vport *vport) lpfc_clear_la(phba, mbox); mbox->mbox_cmpl = lpfc_mbx_cmpl_clear_la; mbox->vport = vport; - rc = lpfc_sli_issue_mbox(phba, mbox, (MBX_NOWAIT | - MBX_STOP_IOCB)); + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); if (rc == MBX_NOT_FINISHED) { mempool_free(mbox, phba->mbox_mem_pool); lpfc_disc_flush_list(vport); @@ -2244,8 +2237,7 @@ lpfc_issue_reg_vpi(struct lpfc_hba *phba, struct lpfc_vport *vport) lpfc_reg_vpi(phba, vport->vpi, vport->fc_myDID, regvpimbox); regvpimbox->mbox_cmpl = lpfc_mbx_cmpl_reg_vpi; regvpimbox->vport = vport; - if (lpfc_sli_issue_mbox(phba, regvpimbox, - (MBX_NOWAIT | MBX_STOP_IOCB)) + if (lpfc_sli_issue_mbox(phba, regvpimbox, MBX_NOWAIT) == MBX_NOT_FINISHED) { mempool_free(regvpimbox, phba->mbox_mem_pool); } @@ -2608,8 +2600,7 @@ lpfc_disc_timeout_handler(struct lpfc_vport *vport) initlinkmbox->mb.un.varInitLnk.lipsr_AL_PA = 0; initlinkmbox->vport = vport; initlinkmbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; - rc = lpfc_sli_issue_mbox(phba, initlinkmbox, - (MBX_NOWAIT | MBX_STOP_IOCB)); + rc = lpfc_sli_issue_mbox(phba, initlinkmbox, MBX_NOWAIT); lpfc_set_loopback_flag(phba); if (rc == MBX_NOT_FINISHED) mempool_free(initlinkmbox, phba->mbox_mem_pool); diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 86c2f2b15b68..8c7fdb8487e0 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -355,7 +355,7 @@ lpfc_config_port_post(struct lpfc_hba *phba) phba->link_state = LPFC_LINK_DOWN; - /* Only process IOCBs on ring 0 till hba_state is READY */ + /* Only process IOCBs on ELS ring till hba_state is READY */ if (psli->ring[psli->extra_ring].cmdringaddr) psli->ring[psli->extra_ring].flag |= LPFC_STOP_IOCB_EVENT; if (psli->ring[psli->fcp_ring].cmdringaddr) @@ -777,7 +777,7 @@ lpfc_handle_latt(struct lpfc_hba *phba) lpfc_read_la(phba, pmb, mp); pmb->mbox_cmpl = lpfc_mbx_cmpl_read_la; pmb->vport = vport; - rc = lpfc_sli_issue_mbox (phba, pmb, (MBX_NOWAIT | MBX_STOP_IOCB)); + rc = lpfc_sli_issue_mbox (phba, pmb, MBX_NOWAIT); if (rc == MBX_NOT_FINISHED) goto lpfc_handle_latt_free_mbuf; diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index 880af0cd463d..71fd00127351 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -343,8 +343,7 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, lpfc_config_link(phba, mbox); mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; mbox->vport = vport; - rc = lpfc_sli_issue_mbox - (phba, mbox, (MBX_NOWAIT | MBX_STOP_IOCB)); + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); if (rc == MBX_NOT_FINISHED) { mempool_free(mbox, phba->mbox_mem_pool); goto out; @@ -828,8 +827,7 @@ lpfc_cmpl_plogi_plogi_issue(struct lpfc_vport *vport, } mbox->context2 = lpfc_nlp_get(ndlp); mbox->vport = vport; - if (lpfc_sli_issue_mbox(phba, mbox, - (MBX_NOWAIT | MBX_STOP_IOCB)) + if (lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT) != MBX_NOT_FINISHED) { lpfc_nlp_set_state(vport, ndlp, NLP_STE_REG_LOGIN_ISSUE); diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 41f13a300ba5..744bad627596 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -474,8 +474,7 @@ lpfc_sli_resume_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) if (pring->txq_cnt && lpfc_is_link_up(phba) && (pring->ringno != phba->sli.fcp_ring || - phba->sli.sli_flag & LPFC_PROCESS_LA) && - !(pring->flag & LPFC_STOP_IOCB_MBX)) { + phba->sli.sli_flag & LPFC_PROCESS_LA)) { while ((iocb = lpfc_sli_next_iocb_slot(phba, pring)) && (nextiocb = lpfc_sli_ringtx_get(phba, pring))) @@ -490,31 +489,6 @@ lpfc_sli_resume_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) return; } -/* lpfc_sli_turn_on_ring is only called by lpfc_sli_handle_mb_event below */ -static void -lpfc_sli_turn_on_ring(struct lpfc_hba *phba, int ringno) -{ - struct lpfc_pgp *pgp = (phba->sli_rev == 3) ? - &phba->slim2p->mbx.us.s3_pgp.port[ringno] : - &phba->slim2p->mbx.us.s2.port[ringno]; - unsigned long iflags; - - /* If the ring is active, flag it */ - spin_lock_irqsave(&phba->hbalock, iflags); - if (phba->sli.ring[ringno].cmdringaddr) { - if (phba->sli.ring[ringno].flag & LPFC_STOP_IOCB_MBX) { - phba->sli.ring[ringno].flag &= ~LPFC_STOP_IOCB_MBX; - /* - * Force update of the local copy of cmdGetInx - */ - phba->sli.ring[ringno].local_getidx - = le32_to_cpu(pgp->cmdGetInx); - lpfc_sli_resume_iocb(phba, &phba->sli.ring[ringno]); - } - } - spin_unlock_irqrestore(&phba->hbalock, iflags); -} - struct lpfc_hbq_entry * lpfc_sli_next_hbq_slot(struct lpfc_hba *phba, uint32_t hbqno) { @@ -2590,21 +2564,6 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) return MBX_NOT_FINISHED; } - /* Handle STOP IOCB processing flag. This is only meaningful - * if we are not polling for mbox completion. - */ - if (flag & MBX_STOP_IOCB) { - flag &= ~MBX_STOP_IOCB; - /* Now flag each ring */ - for (i = 0; i < psli->num_rings; i++) { - /* If the ring is active, flag it */ - if (psli->ring[i].cmdringaddr) { - psli->ring[i].flag |= - LPFC_STOP_IOCB_MBX; - } - } - } - /* Another mailbox command is still being processed, queue this * command to be processed later. */ @@ -2639,23 +2598,6 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) return MBX_BUSY; } - /* Handle STOP IOCB processing flag. This is only meaningful - * if we are not polling for mbox completion. - */ - if (flag & MBX_STOP_IOCB) { - flag &= ~MBX_STOP_IOCB; - if (flag == MBX_NOWAIT) { - /* Now flag each ring */ - for (i = 0; i < psli->num_rings; i++) { - /* If the ring is active, flag it */ - if (psli->ring[i].cmdringaddr) { - psli->ring[i].flag |= - LPFC_STOP_IOCB_MBX; - } - } - } - } - psli->sli_flag |= LPFC_SLI_MBOX_ACTIVE; /* If we are not polling, we MUST be in SLI2 mode */ @@ -2898,9 +2840,9 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, /* * Check to see if we are blocking IOCB processing because of a - * outstanding mbox command. + * outstanding event. */ - if (unlikely(pring->flag & LPFC_STOP_IOCB_MBX)) + if (unlikely(pring->flag & LPFC_STOP_IOCB_EVENT)) goto iocb_busy; if (unlikely(phba->link_state == LPFC_LINK_DOWN)) { @@ -3847,7 +3789,6 @@ lpfc_intr_handler(int irq, void *dev_id) uint32_t ha_copy; uint32_t work_ha_copy; unsigned long status; - int i; uint32_t control; MAILBOX_t *mbox, *pmbox; @@ -4066,10 +4007,6 @@ send_current_mbox: lpfc_mbox_cmpl_put(phba, pmb); goto send_next_mbox; } - } else { - /* Turn on IOCB processing */ - for (i = 0; i < phba->sli.num_rings; i++) - lpfc_sli_turn_on_ring(phba, i); } } diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h index 8b1fe2f62d84..44c3fd9c22f4 100644 --- a/drivers/scsi/lpfc/lpfc_sli.h +++ b/drivers/scsi/lpfc/lpfc_sli.h @@ -92,8 +92,6 @@ typedef struct lpfcMboxq { #define MBX_POLL 1 /* poll mailbox till command done, then return */ #define MBX_NOWAIT 2 /* issue command then return immediately */ -#define MBX_STOP_IOCB 4 /* Stop iocb processing till mbox cmds - complete */ #define LPFC_MAX_RING_MASK 4 /* max num of rctl/type masks allowed per ring */ @@ -129,9 +127,7 @@ struct lpfc_sli_ring { uint16_t flag; /* ring flags */ #define LPFC_DEFERRED_RING_EVENT 0x001 /* Deferred processing a ring event */ #define LPFC_CALL_RING_AVAILABLE 0x002 /* indicates cmd was full */ -#define LPFC_STOP_IOCB_MBX 0x010 /* Stop processing IOCB cmds mbox */ #define LPFC_STOP_IOCB_EVENT 0x020 /* Stop processing IOCB cmds event */ -#define LPFC_STOP_IOCB_MASK 0x030 /* Stop processing IOCB cmds mask */ uint16_t abtsiotag; /* tracks next iotag to use for ABTS */ uint32_t local_getidx; /* last available cmd index (from cmdGetInx) */ -- cgit v1.2.3-59-g8ed1b From 98c9ea5c026ee47efe2a0f595078dbf199d08f50 Mon Sep 17 00:00:00 2001 From: James Smart Date: Sat, 27 Oct 2007 13:37:33 -0400 Subject: [SCSI] lpfc 8.2.3 : Miscellaneous Small Fixes - part 1 Miscellaneous Small Fixes - part 1 - Fix typo kmzlloc -> kzalloc - Fix discovery ndlp use after free panic - Fix link event causing flood of 0108 messages - Relieve some mbox congestion on link up with 100 vports - Fix broken vport parameters - Prevent lock recursion in logo_reglogin_issue - Split uses of error variable in lpfc_pci_probe_one into retval and error - Remove completion code related to dev_loss_tmo - Remove unused LPFC_MAX_HBQ #define - Don't compare pointers to 0 for sparse - Make 2 functions static for sparse - Fix default rpi cleanup code causing rogue ndlps to remain on the NPR list - Remove annoying ELS messages when driver is unloaded - Fix Cannot issue Register Fabric login problems on link up - Remove LPFC_EVT_DEV_LOSS_DELAY - Fix FC port swap test leads to device going offline - Fix vport CT flags to only be set when accepted - Add code to handle signals during vport_create - Fix too many retries in FC-AL mode - Pull lpfc_port_link_failure out of lpfc_linkdown_port Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_attr.c | 62 ++++++++++++++- drivers/scsi/lpfc/lpfc_crtn.h | 2 + drivers/scsi/lpfc/lpfc_ct.c | 62 ++++++++++++--- drivers/scsi/lpfc/lpfc_disc.h | 2 +- drivers/scsi/lpfc/lpfc_els.c | 154 +++++++++++++++++++++++++++---------- drivers/scsi/lpfc/lpfc_hbadisc.c | 123 ++++++++++++++++++----------- drivers/scsi/lpfc/lpfc_init.c | 42 +++++----- drivers/scsi/lpfc/lpfc_mbox.c | 12 ++- drivers/scsi/lpfc/lpfc_nportdisc.c | 2 +- drivers/scsi/lpfc/lpfc_sli.c | 10 +-- drivers/scsi/lpfc/lpfc_sli.h | 3 - drivers/scsi/lpfc/lpfc_vport.c | 46 +++++++---- 12 files changed, 372 insertions(+), 148 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 356dede9cd65..e8e9905828c9 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -2363,13 +2363,67 @@ struct fc_function_template lpfc_transport_functions = { .dev_loss_tmo_callbk = lpfc_dev_loss_tmo_callbk, .terminate_rport_io = lpfc_terminate_rport_io, - /* Vport fields are filled in at runtime based on enable_npiv */ - .vport_create = NULL, - .vport_delete = NULL, - .vport_disable = NULL, .dd_fcvport_size = sizeof(struct lpfc_vport *), }; +struct fc_function_template lpfc_vport_transport_functions = { + /* fixed attributes the driver supports */ + .show_host_node_name = 1, + .show_host_port_name = 1, + .show_host_supported_classes = 1, + .show_host_supported_fc4s = 1, + .show_host_supported_speeds = 1, + .show_host_maxframe_size = 1, + + /* dynamic attributes the driver supports */ + .get_host_port_id = lpfc_get_host_port_id, + .show_host_port_id = 1, + + .get_host_port_type = lpfc_get_host_port_type, + .show_host_port_type = 1, + + .get_host_port_state = lpfc_get_host_port_state, + .show_host_port_state = 1, + + /* active_fc4s is shown but doesn't change (thus no get function) */ + .show_host_active_fc4s = 1, + + .get_host_speed = lpfc_get_host_speed, + .show_host_speed = 1, + + .get_host_fabric_name = lpfc_get_host_fabric_name, + .show_host_fabric_name = 1, + + /* + * The LPFC driver treats linkdown handling as target loss events + * so there are no sysfs handlers for link_down_tmo. + */ + + .get_fc_host_stats = lpfc_get_stats, + .reset_fc_host_stats = lpfc_reset_stats, + + .dd_fcrport_size = sizeof(struct lpfc_rport_data), + .show_rport_maxframe_size = 1, + .show_rport_supported_classes = 1, + + .set_rport_dev_loss_tmo = lpfc_set_rport_loss_tmo, + .show_rport_dev_loss_tmo = 1, + + .get_starget_port_id = lpfc_get_starget_port_id, + .show_starget_port_id = 1, + + .get_starget_node_name = lpfc_get_starget_node_name, + .show_starget_node_name = 1, + + .get_starget_port_name = lpfc_get_starget_port_name, + .show_starget_port_name = 1, + + .dev_loss_tmo_callbk = lpfc_dev_loss_tmo_callbk, + .terminate_rport_io = lpfc_terminate_rport_io, + + .vport_disable = lpfc_vport_disable, +}; + void lpfc_get_cfgparam(struct lpfc_hba *phba) { diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index be4b6584167a..59164c6aa28f 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -68,6 +68,7 @@ int lpfc_check_sli_ndlp(struct lpfc_hba *, struct lpfc_sli_ring *, void lpfc_nlp_init(struct lpfc_vport *, struct lpfc_nodelist *, uint32_t); struct lpfc_nodelist *lpfc_nlp_get(struct lpfc_nodelist *); int lpfc_nlp_put(struct lpfc_nodelist *); +int lpfc_nlp_not_used(struct lpfc_nodelist *ndlp); struct lpfc_nodelist *lpfc_setup_disc_node(struct lpfc_vport *, uint32_t); void lpfc_disc_list_loopmap(struct lpfc_vport *); void lpfc_disc_start(struct lpfc_vport *); @@ -260,6 +261,7 @@ extern struct class_device_attribute *lpfc_vport_attrs[]; extern struct scsi_host_template lpfc_template; extern struct scsi_host_template lpfc_vport_template; extern struct fc_function_template lpfc_transport_functions; +extern struct fc_function_template lpfc_vport_transport_functions; extern int lpfc_sli_mode; extern int lpfc_enable_npiv; diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c index dbe020e66b09..e8bd7c122f1e 100644 --- a/drivers/scsi/lpfc/lpfc_ct.c +++ b/drivers/scsi/lpfc/lpfc_ct.c @@ -458,7 +458,7 @@ lpfc_ns_rsp(struct lpfc_vport *vport, struct lpfc_dmabuf *mp, uint32_t Size) ((lpfc_find_vport_by_did(phba, Did) == NULL) || vport->cfg_peer_port_login)) { if ((vport->port_type != LPFC_NPIV_PORT) || - (!vport->ct_flags & FC_CT_RFF_ID) || + (!(vport->ct_flags & FC_CT_RFF_ID)) || (!vport->cfg_restrict_login)) { ndlp = lpfc_setup_disc_node(vport, Did); if (ndlp) { @@ -854,8 +854,16 @@ lpfc_cmpl_ct_cmd_rft_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, IOCB_t *irsp = &rspiocb->iocb; struct lpfc_vport *vport = cmdiocb->vport; - if (irsp->ulpStatus == IOSTAT_SUCCESS) - vport->ct_flags |= FC_CT_RFT_ID; + if (irsp->ulpStatus == IOSTAT_SUCCESS) { + struct lpfc_dmabuf *outp; + struct lpfc_sli_ct_request *CTrsp; + + outp = (struct lpfc_dmabuf *) cmdiocb->context2; + CTrsp = (struct lpfc_sli_ct_request *) outp->virt; + if (CTrsp->CommandResponse.bits.CmdRsp == + be16_to_cpu(SLI_CT_RESPONSE_FS_ACC)) + vport->ct_flags |= FC_CT_RFT_ID; + } lpfc_cmpl_ct(phba, cmdiocb, rspiocb); return; } @@ -867,8 +875,16 @@ lpfc_cmpl_ct_cmd_rnn_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, IOCB_t *irsp = &rspiocb->iocb; struct lpfc_vport *vport = cmdiocb->vport; - if (irsp->ulpStatus == IOSTAT_SUCCESS) - vport->ct_flags |= FC_CT_RNN_ID; + if (irsp->ulpStatus == IOSTAT_SUCCESS) { + struct lpfc_dmabuf *outp; + struct lpfc_sli_ct_request *CTrsp; + + outp = (struct lpfc_dmabuf *) cmdiocb->context2; + CTrsp = (struct lpfc_sli_ct_request *) outp->virt; + if (CTrsp->CommandResponse.bits.CmdRsp == + be16_to_cpu(SLI_CT_RESPONSE_FS_ACC)) + vport->ct_flags |= FC_CT_RNN_ID; + } lpfc_cmpl_ct(phba, cmdiocb, rspiocb); return; } @@ -880,8 +896,16 @@ lpfc_cmpl_ct_cmd_rspn_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, IOCB_t *irsp = &rspiocb->iocb; struct lpfc_vport *vport = cmdiocb->vport; - if (irsp->ulpStatus == IOSTAT_SUCCESS) - vport->ct_flags |= FC_CT_RSPN_ID; + if (irsp->ulpStatus == IOSTAT_SUCCESS) { + struct lpfc_dmabuf *outp; + struct lpfc_sli_ct_request *CTrsp; + + outp = (struct lpfc_dmabuf *) cmdiocb->context2; + CTrsp = (struct lpfc_sli_ct_request *) outp->virt; + if (CTrsp->CommandResponse.bits.CmdRsp == + be16_to_cpu(SLI_CT_RESPONSE_FS_ACC)) + vport->ct_flags |= FC_CT_RSPN_ID; + } lpfc_cmpl_ct(phba, cmdiocb, rspiocb); return; } @@ -893,8 +917,16 @@ lpfc_cmpl_ct_cmd_rsnn_nn(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, IOCB_t *irsp = &rspiocb->iocb; struct lpfc_vport *vport = cmdiocb->vport; - if (irsp->ulpStatus == IOSTAT_SUCCESS) - vport->ct_flags |= FC_CT_RSNN_NN; + if (irsp->ulpStatus == IOSTAT_SUCCESS) { + struct lpfc_dmabuf *outp; + struct lpfc_sli_ct_request *CTrsp; + + outp = (struct lpfc_dmabuf *) cmdiocb->context2; + CTrsp = (struct lpfc_sli_ct_request *) outp->virt; + if (CTrsp->CommandResponse.bits.CmdRsp == + be16_to_cpu(SLI_CT_RESPONSE_FS_ACC)) + vport->ct_flags |= FC_CT_RSNN_NN; + } lpfc_cmpl_ct(phba, cmdiocb, rspiocb); return; } @@ -918,8 +950,16 @@ lpfc_cmpl_ct_cmd_rff_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, IOCB_t *irsp = &rspiocb->iocb; struct lpfc_vport *vport = cmdiocb->vport; - if (irsp->ulpStatus == IOSTAT_SUCCESS) - vport->ct_flags |= FC_CT_RFF_ID; + if (irsp->ulpStatus == IOSTAT_SUCCESS) { + struct lpfc_dmabuf *outp; + struct lpfc_sli_ct_request *CTrsp; + + outp = (struct lpfc_dmabuf *) cmdiocb->context2; + CTrsp = (struct lpfc_sli_ct_request *) outp->virt; + if (CTrsp->CommandResponse.bits.CmdRsp == + be16_to_cpu(SLI_CT_RESPONSE_FS_ACC)) + vport->ct_flags |= FC_CT_RFF_ID; + } lpfc_cmpl_ct(phba, cmdiocb, rspiocb); return; } diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h index aacac9ac5381..c9422a8423ca 100644 --- a/drivers/scsi/lpfc/lpfc_disc.h +++ b/drivers/scsi/lpfc/lpfc_disc.h @@ -36,7 +36,6 @@ enum lpfc_work_type { LPFC_EVT_WARM_START, LPFC_EVT_KILL, LPFC_EVT_ELS_RETRY, - LPFC_EVT_DEV_LOSS_DELAY, LPFC_EVT_DEV_LOSS, }; @@ -104,6 +103,7 @@ struct lpfc_nodelist { #define NLP_RM_DFLT_RPI 0x4000000 /* need to remove leftover dflt RPI */ #define NLP_NODEV_REMOVE 0x8000000 /* Defer removal till discovery ends */ #define NLP_TARGET_REMOVE 0x10000000 /* Target remove in process */ +#define NLP_DELAYED_RM 0x20000000 /* Defer UNUSED List removal */ /* There are 4 different double linked lists nodelist entries can reside on. * The Port Login (PLOGI) list and Address Discovery (ADISC) list are used diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index b73612d4fc53..813eeca7ce1e 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -109,9 +109,10 @@ lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp, /* fill in BDEs for command */ /* Allocate buffer for command payload */ - if (((pcmd = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL)) == 0) || - ((pcmd->virt = lpfc_mbuf_alloc(phba, - MEM_PRI, &(pcmd->phys))) == 0)) { + pcmd = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); + if (pcmd) + pcmd->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &pcmd->phys); + if (!pcmd || !pcmd->virt) { kfree(pcmd); lpfc_sli_release_iocbq(phba, elsiocb); @@ -126,7 +127,7 @@ lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp, if (prsp) prsp->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &prsp->phys); - if (prsp == 0 || prsp->virt == 0) { + if (!prsp || !prsp->virt) { kfree(prsp); lpfc_mbuf_free(phba, pcmd->virt, pcmd->phys); kfree(pcmd); @@ -143,7 +144,7 @@ lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp, if (pbuflist) pbuflist->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &pbuflist->phys); - if (pbuflist == 0 || pbuflist->virt == 0) { + if (!pbuflist || !pbuflist->virt) { lpfc_sli_release_iocbq(phba, elsiocb); lpfc_mbuf_free(phba, pcmd->virt, pcmd->phys); lpfc_mbuf_free(phba, prsp->virt, prsp->phys); @@ -234,15 +235,20 @@ lpfc_issue_fabric_reglogin(struct lpfc_vport *vport) struct lpfc_nodelist *ndlp; struct serv_parm *sp; int rc; + int err = 0; sp = &phba->fc_fabparam; ndlp = lpfc_findnode_did(vport, Fabric_DID); - if (!ndlp) + if (!ndlp) { + err = 1; goto fail; + } mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); - if (!mbox) + if (!mbox) { + err = 2; goto fail; + } vport->port_state = LPFC_FABRIC_CFG_LINK; lpfc_config_link(phba, mbox); @@ -250,24 +256,32 @@ lpfc_issue_fabric_reglogin(struct lpfc_vport *vport) mbox->vport = vport; rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); - if (rc == MBX_NOT_FINISHED) + if (rc == MBX_NOT_FINISHED) { + err = 3; goto fail_free_mbox; + } mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); - if (!mbox) + if (!mbox) { + err = 4; goto fail; + } rc = lpfc_reg_login(phba, vport->vpi, Fabric_DID, (uint8_t *)sp, mbox, 0); - if (rc) + if (rc) { + err = 5; goto fail_free_mbox; + } mbox->mbox_cmpl = lpfc_mbx_cmpl_fabric_reg_login; mbox->vport = vport; mbox->context2 = lpfc_nlp_get(ndlp); rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); - if (rc == MBX_NOT_FINISHED) + if (rc == MBX_NOT_FINISHED) { + err = 6; goto fail_issue_reg_login; + } return 0; @@ -282,7 +296,7 @@ fail_free_mbox: fail: lpfc_vport_set_state(vport, FC_VPORT_FAILED); lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, - "0249 Cannot issue Register Fabric login\n"); + "0249 Cannot issue Register Fabric login: Err %d\n", err); return -ENXIO; } @@ -684,6 +698,9 @@ lpfc_initial_flogi(struct lpfc_vport *vport) struct lpfc_hba *phba = vport->phba; struct lpfc_nodelist *ndlp; + vport->port_state = LPFC_FLOGI; + lpfc_set_disctmo(vport); + /* First look for the Fabric ndlp */ ndlp = lpfc_findnode_did(vport, Fabric_DID); if (!ndlp) { @@ -694,6 +711,12 @@ lpfc_initial_flogi(struct lpfc_vport *vport) lpfc_nlp_init(vport, ndlp, Fabric_DID); } else { lpfc_dequeue_node(vport, ndlp); + + /* If we go thru this path, Fabric_DID ndlp is in the process + * of being removed. We need to bump the reference count by 1 + * so it stays around all through this link up period. + */ + lpfc_nlp_get(ndlp); } if (lpfc_issue_els_flogi(vport, ndlp, 0)) { lpfc_nlp_put(ndlp); @@ -932,6 +955,7 @@ lpfc_issue_els_plogi(struct lpfc_vport *vport, uint32_t did, uint8_t retry) struct lpfc_hba *phba = vport->phba; struct serv_parm *sp; IOCB_t *icmd; + struct lpfc_nodelist *ndlp; struct lpfc_iocbq *elsiocb; struct lpfc_sli_ring *pring; struct lpfc_sli *psli; @@ -942,8 +966,11 @@ lpfc_issue_els_plogi(struct lpfc_vport *vport, uint32_t did, uint8_t retry) psli = &phba->sli; pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */ + ndlp = lpfc_findnode_did(vport, did); + /* If ndlp if not NULL, we will bump the reference count on it */ + cmdsize = (sizeof(uint32_t) + sizeof(struct serv_parm)); - elsiocb = lpfc_prep_els_iocb(vport, 1, cmdsize, retry, NULL, did, + elsiocb = lpfc_prep_els_iocb(vport, 1, cmdsize, retry, ndlp, did, ELS_CMD_PLOGI); if (!elsiocb) return 1; @@ -1412,6 +1439,13 @@ lpfc_issue_els_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, psli = &phba->sli; pring = &psli->ring[LPFC_ELS_RING]; + spin_lock_irq(shost->host_lock); + if (ndlp->nlp_flag & NLP_LOGO_SND) { + spin_unlock_irq(shost->host_lock); + return 0; + } + spin_unlock_irq(shost->host_lock); + cmdsize = (2 * sizeof(uint32_t)) + sizeof(struct lpfc_name); elsiocb = lpfc_prep_els_iocb(vport, 1, cmdsize, retry, ndlp, ndlp->nlp_DID, ELS_CMD_LOGO); @@ -1758,6 +1792,7 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, uint32_t *elscmd; struct ls_rjt stat; int retry = 0, maxretry = lpfc_max_els_tries, delay = 0; + int logerr = 0; uint32_t cmd = 0; uint32_t did; @@ -1814,6 +1849,7 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, break; case IOERR_NO_RESOURCES: + logerr = 1; /* HBA out of resources */ retry = 1; if (cmdiocb->retry > 100) delay = 100; @@ -1842,6 +1878,7 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, case IOSTAT_NPORT_BSY: case IOSTAT_FABRIC_BSY: + logerr = 1; /* Fabric / Remote NPort out of resources */ retry = 1; break; @@ -1922,6 +1959,15 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, if (did == FDMI_DID) retry = 1; + if ((cmd == ELS_CMD_FLOGI) && + (phba->fc_topology != TOPOLOGY_LOOP)) { + /* FLOGI retry policy */ + retry = 1; + maxretry = 48; + if (cmdiocb->retry >= 32) + delay = 1000; + } + if ((++cmdiocb->retry) >= maxretry) { phba->fc_stat.elsRetryExceeded++; retry = 0; @@ -2005,11 +2051,20 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } } /* No retry ELS command to remote NPORT */ - lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, + if (logerr) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, + "0137 No retry ELS command x%x to remote " + "NPORT x%x: Out of Resources: Error:x%x/%x\n", + cmd, did, irsp->ulpStatus, + irsp->un.ulpWord[4]); + } + else { + lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS, "0108 No retry ELS command x%x to remote " "NPORT x%x Retried:%d Error:x%x/%x\n", cmd, did, cmdiocb->retry, irsp->ulpStatus, irsp->un.ulpWord[4]); + } return 0; } @@ -2089,6 +2144,12 @@ lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) kfree(mp); mempool_free(pmb, phba->mbox_mem_pool); lpfc_nlp_put(ndlp); + + /* This is the end of the default RPI cleanup logic for this + * ndlp. If no other discovery threads are using this ndlp. + * we should free all resources associated with it. + */ + lpfc_nlp_not_used(ndlp); return; } @@ -2118,6 +2179,9 @@ lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } mempool_free(mbox, phba->mbox_mem_pool); } + if (ndlp && (ndlp->nlp_flag & NLP_RM_DFLT_RPI)) + if (lpfc_nlp_not_used(ndlp)) + ndlp = NULL; goto out; } @@ -2153,15 +2217,22 @@ lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, != MBX_NOT_FINISHED) { goto out; } - lpfc_nlp_put(ndlp); - /* NOTE: we should have messages for unsuccessful - reglogin */ + + /* ELS rsp: Cannot issue reg_login for */ + lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, + "0138 ELS rsp: Cannot issue reg_login for x%x " + "Data: x%x x%x x%x\n", + ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_state, + ndlp->nlp_rpi); + + if (lpfc_nlp_not_used(ndlp)) + ndlp = NULL; } else { /* Do not drop node for lpfc_els_abort'ed ELS cmds */ if (!lpfc_error_lost_link(irsp) && ndlp->nlp_flag & NLP_ACC_REGLOGIN) { - lpfc_drop_node(vport, ndlp); - ndlp = NULL; + if (lpfc_nlp_not_used(ndlp)) + ndlp = NULL; } } mp = (struct lpfc_dmabuf *) mbox->context1; @@ -2350,10 +2421,14 @@ lpfc_els_rsp_reject(struct lpfc_vport *vport, uint32_t rejectError, /* If the node is in the UNUSED state, and we are sending * a reject, we are done with it. Release driver reference * count here. The outstanding els will release its reference on - * completion and the node can be freed then. + * completion, as long as the ndlp stays in the UNUSED list, + * and the node can be freed then. */ - if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) + if ((ndlp->nlp_state == NLP_STE_UNUSED_NODE) && + !(ndlp->nlp_flag & NLP_DELAYED_RM)) { + ndlp->nlp_flag |= NLP_DELAYED_RM; lpfc_nlp_put(ndlp); + } if (rc == IOCB_ERROR) { lpfc_els_free_iocb(phba, elsiocb); @@ -3466,8 +3541,6 @@ lpfc_els_rcv_fan(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, } } - vport->port_state = LPFC_FLOGI; - lpfc_set_disctmo(vport); lpfc_initial_flogi(vport); return 0; } @@ -3747,11 +3820,11 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, goto dropit; lpfc_nlp_init(vport, ndlp, did); + lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE); newnode = 1; if ((did & Fabric_DID_MASK) == Fabric_DID_MASK) { ndlp->nlp_type |= NLP_FABRIC; } - lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNUSED_NODE); } phba->fc_stat.elsRcvFrame++; @@ -3791,8 +3864,8 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, phba->fc_stat.elsRcvFLOGI++; lpfc_els_rcv_flogi(vport, elsiocb, ndlp); - if (newnode) - lpfc_drop_node(vport, ndlp); + if (newnode && (!(ndlp->nlp_flag & NLP_DELAYED_RM))) + lpfc_nlp_put(ndlp); break; case ELS_CMD_LOGO: lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_UNSOL, @@ -3821,8 +3894,8 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, case ELS_CMD_RSCN: phba->fc_stat.elsRcvRSCN++; lpfc_els_rcv_rscn(vport, elsiocb, ndlp); - if (newnode) - lpfc_drop_node(vport, ndlp); + if (newnode && (!(ndlp->nlp_flag & NLP_DELAYED_RM))) + lpfc_nlp_put(ndlp); break; case ELS_CMD_ADISC: lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_UNSOL, @@ -3893,8 +3966,8 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, phba->fc_stat.elsRcvLIRR++; lpfc_els_rcv_lirr(vport, elsiocb, ndlp); - if (newnode) - lpfc_drop_node(vport, ndlp); + if (newnode && (!(ndlp->nlp_flag & NLP_DELAYED_RM))) + lpfc_nlp_put(ndlp); break; case ELS_CMD_RPS: lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_UNSOL, @@ -3903,8 +3976,8 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, phba->fc_stat.elsRcvRPS++; lpfc_els_rcv_rps(vport, elsiocb, ndlp); - if (newnode) - lpfc_drop_node(vport, ndlp); + if (newnode && (!(ndlp->nlp_flag & NLP_DELAYED_RM))) + lpfc_nlp_put(ndlp); break; case ELS_CMD_RPL: lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_UNSOL, @@ -3913,8 +3986,8 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, phba->fc_stat.elsRcvRPL++; lpfc_els_rcv_rpl(vport, elsiocb, ndlp); - if (newnode) - lpfc_drop_node(vport, ndlp); + if (newnode && (!(ndlp->nlp_flag & NLP_DELAYED_RM))) + lpfc_nlp_put(ndlp); break; case ELS_CMD_RNID: lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_UNSOL, @@ -3923,8 +3996,8 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, phba->fc_stat.elsRcvRNID++; lpfc_els_rcv_rnid(vport, elsiocb, ndlp); - if (newnode) - lpfc_drop_node(vport, ndlp); + if (newnode && (!(ndlp->nlp_flag & NLP_DELAYED_RM))) + lpfc_nlp_put(ndlp); break; default: lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_UNSOL, @@ -3938,8 +4011,8 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, "0115 Unknown ELS command x%x " "received from NPORT x%x\n", cmd, did); - if (newnode) - lpfc_drop_node(vport, ndlp); + if (newnode && (!(ndlp->nlp_flag & NLP_DELAYED_RM))) + lpfc_nlp_put(ndlp); break; } @@ -3955,10 +4028,11 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, return; dropit: - lpfc_printf_log(phba, KERN_ERR, LOG_ELS, + if (vport && !(vport->load_flag & FC_UNLOADING)) + lpfc_printf_log(phba, KERN_ERR, LOG_ELS, "(%d):0111 Dropping received ELS cmd " "Data: x%x x%x x%x\n", - vport ? vport->vpi : 0xffff, icmd->ulpStatus, + vport->vpi, icmd->ulpStatus, icmd->un.ulpWord[4], icmd->ulpTimeout); phba->fc_stat.elsRcvDrop++; } diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 6f5bf8189950..e181a98caf16 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -107,7 +107,6 @@ lpfc_dev_loss_tmo_callbk(struct fc_rport *rport) struct lpfc_nodelist * ndlp; struct lpfc_vport *vport; struct lpfc_hba *phba; - struct completion devloss_compl; struct lpfc_work_evt *evtp; rdata = rport->dd_data; @@ -129,7 +128,6 @@ lpfc_dev_loss_tmo_callbk(struct fc_rport *rport) "rport devlosscb: sid:x%x did:x%x flg:x%x", ndlp->nlp_sid, ndlp->nlp_DID, ndlp->nlp_flag); - init_completion(&devloss_compl); evtp = &ndlp->dev_loss_evt; if (!list_empty(&evtp->evt_listp)) @@ -137,7 +135,6 @@ lpfc_dev_loss_tmo_callbk(struct fc_rport *rport) spin_lock_irq(&phba->hbalock); evtp->evt_arg1 = ndlp; - evtp->evt_arg2 = &devloss_compl; evtp->evt = LPFC_EVT_DEV_LOSS; list_add_tail(&evtp->evt_listp, &phba->work_list); if (phba->work_wait) @@ -145,8 +142,6 @@ lpfc_dev_loss_tmo_callbk(struct fc_rport *rport) spin_unlock_irq(&phba->hbalock); - wait_for_completion(&devloss_compl); - return; } @@ -260,7 +255,6 @@ lpfc_work_list_done(struct lpfc_hba *phba) { struct lpfc_work_evt *evtp = NULL; struct lpfc_nodelist *ndlp; - struct lpfc_vport *vport; int free_evt; spin_lock_irq(&phba->hbalock); @@ -270,24 +264,6 @@ lpfc_work_list_done(struct lpfc_hba *phba) spin_unlock_irq(&phba->hbalock); free_evt = 1; switch (evtp->evt) { - case LPFC_EVT_DEV_LOSS_DELAY: - free_evt = 0; /* evt is part of ndlp */ - ndlp = (struct lpfc_nodelist *) (evtp->evt_arg1); - vport = ndlp->vport; - if (!vport) - break; - - lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_RPORT, - "rport devlossdly:did:x%x flg:x%x", - ndlp->nlp_DID, ndlp->nlp_flag, 0); - - if (!(vport->load_flag & FC_UNLOADING) && - !(ndlp->nlp_flag & NLP_DELAY_TMO) && - !(ndlp->nlp_flag & NLP_NPR_2B_DISC)) { - lpfc_disc_state_machine(vport, ndlp, NULL, - NLP_EVT_DEVICE_RM); - } - break; case LPFC_EVT_ELS_RETRY: ndlp = (struct lpfc_nodelist *) (evtp->evt_arg1); lpfc_els_retry_delay_handler(ndlp); @@ -298,7 +274,6 @@ lpfc_work_list_done(struct lpfc_hba *phba) lpfc_nlp_get(ndlp); lpfc_dev_loss_tmo_handler(ndlp); free_evt = 0; - complete((struct completion *)(evtp->evt_arg2)); lpfc_nlp_put(ndlp); break; case LPFC_EVT_ONLINE: @@ -552,7 +527,9 @@ lpfc_cleanup_rpis(struct lpfc_vport *vport, int remove) if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) continue; - if (phba->sli3_options & LPFC_SLI3_VPORT_TEARDOWN) + if ((phba->sli3_options & LPFC_SLI3_VPORT_TEARDOWN) || + ((vport->port_type == LPFC_NPIV_PORT) && + (ndlp->nlp_DID == NameServer_DID))) lpfc_unreg_rpi(vport, ndlp); /* Leave Fabric nodes alone on link down */ @@ -570,16 +547,9 @@ lpfc_cleanup_rpis(struct lpfc_vport *vport, int remove) } static void -lpfc_linkdown_port(struct lpfc_vport *vport) +lpfc_port_link_failure(struct lpfc_vport *vport) { struct lpfc_nodelist *ndlp, *next_ndlp; - struct Scsi_Host *shost = lpfc_shost_from_vport(vport); - - fc_host_post_event(shost, fc_get_event_number(), FCH_EVT_LINKDOWN, 0); - - lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD, - "Link Down: state:x%x rtry:x%x flg:x%x", - vport->port_state, vport->fc_ns_retry, vport->fc_flag); /* Cleanup any outstanding RSCN activity */ lpfc_els_flush_rscn(vport); @@ -598,6 +568,21 @@ lpfc_linkdown_port(struct lpfc_vport *vport) lpfc_can_disctmo(vport); } +static void +lpfc_linkdown_port(struct lpfc_vport *vport) +{ + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + + fc_host_post_event(shost, fc_get_event_number(), FCH_EVT_LINKDOWN, 0); + + lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD, + "Link Down: state:x%x rtry:x%x flg:x%x", + vport->port_state, vport->fc_ns_retry, vport->fc_flag); + + lpfc_port_link_failure(vport); + +} + int lpfc_linkdown(struct lpfc_hba *phba) { @@ -851,8 +836,6 @@ lpfc_mbx_cmpl_local_config_link(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) * LPFC_FLOGI while waiting for FLOGI cmpl */ if (vport->port_state != LPFC_FLOGI) { - vport->port_state = LPFC_FLOGI; - lpfc_set_disctmo(vport); lpfc_initial_flogi(vport); } return; @@ -1622,6 +1605,16 @@ lpfc_nlp_set_state(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, ndlp->nlp_type &= ~NLP_FC_NODE; } + if ((old_state == NLP_STE_UNUSED_NODE) && + (state != NLP_STE_UNUSED_NODE) && + (ndlp->nlp_flag & NLP_DELAYED_RM)) { + /* We are using the ndlp after all, so reverse + * the delayed removal of it. + */ + ndlp->nlp_flag &= ~NLP_DELAYED_RM; + lpfc_nlp_get(ndlp); + } + if (list_empty(&ndlp->nlp_listp)) { spin_lock_irq(shost->host_lock); list_add_tail(&ndlp->nlp_listp, &vport->fc_nodes); @@ -1654,7 +1647,9 @@ void lpfc_drop_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) { lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNUSED_NODE); - lpfc_nlp_put(ndlp); + if (!(ndlp->nlp_flag & NLP_DELAYED_RM)) + lpfc_nlp_put(ndlp); + return; } /* @@ -1975,11 +1970,6 @@ lpfc_cleanup_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) if (!list_empty(&ndlp->dev_loss_evt.evt_listp)) list_del_init(&ndlp->dev_loss_evt.evt_listp); - if (!list_empty(&ndlp->dev_loss_evt.evt_listp)) { - list_del_init(&ndlp->dev_loss_evt.evt_listp); - complete((struct completion *)(ndlp->dev_loss_evt.evt_arg2)); - } - lpfc_unreg_rpi(vport, ndlp); return 0; @@ -2418,7 +2408,6 @@ lpfc_disc_flush_list(struct lpfc_vport *vport) if (ndlp->nlp_state == NLP_STE_PLOGI_ISSUE || ndlp->nlp_state == NLP_STE_ADISC_ISSUE) { lpfc_free_tx(phba, ndlp); - lpfc_nlp_put(ndlp); } } } @@ -2516,8 +2505,6 @@ lpfc_disc_timeout_handler(struct lpfc_vport *vport) } } if (vport->port_state != LPFC_FLOGI) { - vport->port_state = LPFC_FLOGI; - lpfc_set_disctmo(vport); lpfc_initial_flogi(vport); } break; @@ -2828,6 +2815,9 @@ lpfc_nlp_init(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, return; } +/* This routine releases all resources associated with a specifc NPort's ndlp + * and mempool_free's the nodelist. + */ static void lpfc_nlp_release(struct kref *kref) { @@ -2842,16 +2832,57 @@ lpfc_nlp_release(struct kref *kref) mempool_free(ndlp, ndlp->vport->phba->nlp_mem_pool); } +/* This routine bumps the reference count for a ndlp structure to ensure + * that one discovery thread won't free a ndlp while another discovery thread + * is using it. + */ struct lpfc_nodelist * lpfc_nlp_get(struct lpfc_nodelist *ndlp) { - if (ndlp) + if (ndlp) { + lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE, + "node get: did:x%x flg:x%x refcnt:x%x", + ndlp->nlp_DID, ndlp->nlp_flag, + atomic_read(&ndlp->kref.refcount)); kref_get(&ndlp->kref); + } return ndlp; } + +/* This routine decrements the reference count for a ndlp structure. If the + * count goes to 0, this indicates the the associated nodelist should be freed. + */ int lpfc_nlp_put(struct lpfc_nodelist *ndlp) { + if (ndlp) { + lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE, + "node put: did:x%x flg:x%x refcnt:x%x", + ndlp->nlp_DID, ndlp->nlp_flag, + atomic_read(&ndlp->kref.refcount)); + } return ndlp ? kref_put(&ndlp->kref, lpfc_nlp_release) : 0; } + +/* This routine free's the specified nodelist if it is not in use + * by any other discovery thread. This routine returns 1 if the ndlp + * is not being used by anyone and has been freed. A return value of + * 0 indicates it is being used by another discovery thread and the + * refcount is left unchanged. + */ +int +lpfc_nlp_not_used(struct lpfc_nodelist *ndlp) +{ + lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE, + "node not used: did:x%x flg:x%x refcnt:x%x", + ndlp->nlp_DID, ndlp->nlp_flag, + atomic_read(&ndlp->kref.refcount)); + + if (atomic_read(&ndlp->kref.refcount) == 1) { + lpfc_nlp_put(ndlp); + return 1; + } + return 0; +} + diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 8c7fdb8487e0..729694d97597 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -1143,9 +1143,8 @@ lpfc_post_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, int cnt, /* Allocate buffer to post */ mp1 = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL); if (mp1) - mp1->virt = lpfc_mbuf_alloc(phba, MEM_PRI, - &mp1->phys); - if (mp1 == 0 || mp1->virt == 0) { + mp1->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &mp1->phys); + if (!mp1 || !mp1->virt) { kfree(mp1); lpfc_sli_release_iocbq(phba, iocb); pring->missbufcnt = cnt; @@ -1159,7 +1158,7 @@ lpfc_post_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, int cnt, if (mp2) mp2->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &mp2->phys); - if (mp2 == 0 || mp2->virt == 0) { + if (!mp2 || !mp2->virt) { kfree(mp2); lpfc_mbuf_free(phba, mp1->virt, mp1->phys); kfree(mp1); @@ -1762,7 +1761,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) struct Scsi_Host *shost = NULL; void *ptr; unsigned long bar0map_len, bar2map_len; - int error = -ENODEV; + int error = -ENODEV, retval; int i, hbq_count; uint16_t iotag; @@ -1878,9 +1877,11 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) lpfc_sli_setup(phba); lpfc_sli_queue_setup(phba); - error = lpfc_mem_alloc(phba); - if (error) + retval = lpfc_mem_alloc(phba); + if (retval) { + error = retval; goto out_free_hbqslimp; + } /* Initialize and populate the iocb list per host. */ INIT_LIST_HEAD(&phba->lpfc_iocb_list); @@ -1946,8 +1947,8 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) pci_set_drvdata(pdev, shost); if (phba->cfg_use_msi) { - error = pci_enable_msi(phba->pcidev); - if (!error) + retval = pci_enable_msi(phba->pcidev); + if (!retval) phba->using_msi = 1; else lpfc_printf_log(phba, KERN_INFO, LOG_INIT, @@ -1955,11 +1956,12 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) "with IRQ\n"); } - error = request_irq(phba->pcidev->irq, lpfc_intr_handler, IRQF_SHARED, + retval = request_irq(phba->pcidev->irq, lpfc_intr_handler, IRQF_SHARED, LPFC_DRIVER_NAME, phba); - if (error) { + if (retval) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0451 Enable interrupt handler failed\n"); + error = retval; goto out_disable_msi; } @@ -1969,11 +1971,15 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET; phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET; - if (lpfc_alloc_sysfs_attr(vport)) + if (lpfc_alloc_sysfs_attr(vport)) { + error = -ENOMEM; goto out_free_irq; + } - if (lpfc_sli_hba_setup(phba)) + if (lpfc_sli_hba_setup(phba)) { + error = -ENODEV; goto out_remove_device; + } /* * hba setup may have changed the hba_queue_depth so we need to adjust @@ -2303,14 +2309,12 @@ lpfc_init(void) if (lpfc_transport_template == NULL) return -ENOMEM; if (lpfc_enable_npiv) { - lpfc_transport_functions.vport_create = NULL; - lpfc_transport_functions.vport_delete = NULL; - lpfc_transport_functions.issue_fc_host_lip = NULL; - lpfc_transport_functions.vport_disable = lpfc_vport_disable; lpfc_vport_transport_template = - fc_attach_transport(&lpfc_transport_functions); - if (lpfc_vport_transport_template == NULL) + fc_attach_transport(&lpfc_vport_transport_functions); + if (lpfc_vport_transport_template == NULL) { + fc_release_transport(lpfc_transport_template); return -ENOMEM; + } } error = pci_register_driver(&lpfc_driver); if (error) { diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index 7256be3f4e2f..6b64e573ad4e 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -288,8 +288,10 @@ lpfc_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, int vpi) /* Get a buffer to hold the HBAs Service Parameters */ - if (((mp = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL)) == 0) || - ((mp->virt = lpfc_mbuf_alloc(phba, 0, &(mp->phys))) == 0)) { + mp = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL); + if (mp) + mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys); + if (!mp || !mp->virt) { kfree(mp); mb->mbxCommand = MBX_READ_SPARM64; /* READ_SPARAM: no buffers */ @@ -387,8 +389,10 @@ lpfc_reg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t did, mb->mbxOwner = OWN_HOST; /* Get a buffer to hold NPorts Service Parameters */ - if (((mp = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL)) == NULL) || - ((mp->virt = lpfc_mbuf_alloc(phba, 0, &(mp->phys))) == 0)) { + mp = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL); + if (mp) + mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys); + if (!mp || !mp->virt) { kfree(mp); mb->mbxCommand = MBX_REG_LOGIN64; /* REG_LOGIN: no buffers */ diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index 71fd00127351..1a16ee9b2e87 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -1135,7 +1135,7 @@ lpfc_rcv_logo_reglogin_issue(struct lpfc_vport *vport, (ndlp == (struct lpfc_nodelist *) mb->context2)) { mp = (struct lpfc_dmabuf *) (mb->context1); if (mp) { - lpfc_mbuf_free(phba, mp->virt, mp->phys); + __lpfc_mbuf_free(phba, mp->virt, mp->phys); kfree(mp); } lpfc_nlp_put(ndlp); diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 744bad627596..49f2fdd2ba2b 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -1914,8 +1914,8 @@ lpfc_sli_brdkill(struct lpfc_hba *phba) "0329 Kill HBA Data: x%x x%x\n", phba->pport->port_state, psli->sli_flag); - if ((pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, - GFP_KERNEL)) == 0) + pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!pmb) return 1; /* Disable the error attention */ @@ -2809,7 +2809,7 @@ lpfc_sli_next_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, /* * Lockless version of lpfc_sli_issue_iocb. */ -int +static int __lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_iocbq *piocb, uint32_t flag) { @@ -2954,7 +2954,7 @@ lpfc_extra_ring_setup( struct lpfc_hba *phba) return 0; } -void +static void lpfc_sli_async_event_handler(struct lpfc_hba * phba, struct lpfc_sli_ring * pring, struct lpfc_iocbq * iocbq) { @@ -3717,7 +3717,7 @@ lpfc_sli_issue_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq, unsigned long flag; /* The caller must leave context1 empty. */ - if (pmboxq->context1 != 0) + if (pmboxq->context1) return MBX_NOT_FINISHED; /* setup wake call as IOCB callback */ diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h index 44c3fd9c22f4..5fcfe88e2a3f 100644 --- a/drivers/scsi/lpfc/lpfc_sli.h +++ b/drivers/scsi/lpfc/lpfc_sli.h @@ -197,9 +197,6 @@ struct lpfc_hbq_init { uint32_t add_count; /* number to allocate when starved */ } ; -#define LPFC_MAX_HBQ 16 - - /* Structure used to hold SLI statistical counters and info */ struct lpfc_sli_stat { uint64_t mbox_stat_err; /* Mbox cmds completed status error */ diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c index 3b705ccc771a..fd07d9d7f507 100644 --- a/drivers/scsi/lpfc/lpfc_vport.c +++ b/drivers/scsi/lpfc/lpfc_vport.c @@ -125,15 +125,26 @@ lpfc_vport_sparm(struct lpfc_hba *phba, struct lpfc_vport *vport) pmb->vport = vport; rc = lpfc_sli_issue_mbox_wait(phba, pmb, phba->fc_ratov * 2); if (rc != MBX_SUCCESS) { - lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT | LOG_VPORT, - "1818 VPort failed init, mbxCmd x%x " - "READ_SPARM mbxStatus x%x, rc = x%x\n", - mb->mbxCommand, mb->mbxStatus, rc); - lpfc_mbuf_free(phba, mp->virt, mp->phys); - kfree(mp); - if (rc != MBX_TIMEOUT) - mempool_free(pmb, phba->mbox_mem_pool); - return -EIO; + if (signal_pending(current)) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT | LOG_VPORT, + "1830 Signal aborted mbxCmd x%x\n", + mb->mbxCommand); + lpfc_mbuf_free(phba, mp->virt, mp->phys); + kfree(mp); + if (rc != MBX_TIMEOUT) + mempool_free(pmb, phba->mbox_mem_pool); + return -EINTR; + } else { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT | LOG_VPORT, + "1818 VPort failed init, mbxCmd x%x " + "READ_SPARM mbxStatus x%x, rc = x%x\n", + mb->mbxCommand, mb->mbxStatus, rc); + lpfc_mbuf_free(phba, mp->virt, mp->phys); + kfree(mp); + if (rc != MBX_TIMEOUT) + mempool_free(pmb, phba->mbox_mem_pool); + return -EIO; + } } memcpy(&vport->fc_sparam, mp->virt, sizeof (struct serv_parm)); @@ -204,6 +215,7 @@ lpfc_vport_create(struct fc_vport *fc_vport, bool disable) int instance; int vpi; int rc = VPORT_ERROR; + int status; if ((phba->sli_rev < 3) || !(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)) { @@ -248,13 +260,19 @@ lpfc_vport_create(struct fc_vport *fc_vport, bool disable) vport->vpi = vpi; lpfc_debugfs_initialize(vport); - if (lpfc_vport_sparm(phba, vport)) { - lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, - "1813 Create VPORT failed. " - "Cannot get sparam\n"); + if ((status = lpfc_vport_sparm(phba, vport))) { + if (status == -EINTR) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, + "1831 Create VPORT Interrupted.\n"); + rc = VPORT_ERROR; + } else { + lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, + "1813 Create VPORT failed. " + "Cannot get sparam\n"); + rc = VPORT_NORESOURCES; + } lpfc_free_vpi(phba, vpi); destroy_port(vport); - rc = VPORT_NORESOURCES; goto error_out; } -- cgit v1.2.3-59-g8ed1b From 87af33fe5f78c27cf9e43c6e586dd6efd4be3e40 Mon Sep 17 00:00:00 2001 From: James Smart Date: Sat, 27 Oct 2007 13:37:43 -0400 Subject: [SCSI] lpfc 8.2.3 : FC Discovery Fixes FC Discovery Fixes: - Fix up lpfc_drop_node() vs lpfc_nlp_not_used() usage - Clear ADISC flag when unregistering RPI and REMOVE ndlps if in recovery. - Fix usage of UNUSED list and ndlps - Fix PLOGI race conditions - Reset link if NameServer PLOGI errors occur - Synchronize GID_FT queries with PLOGI receptions Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_crtn.h | 4 + drivers/scsi/lpfc/lpfc_disc.h | 1 - drivers/scsi/lpfc/lpfc_els.c | 231 ++++++++++++++++++++----------------- drivers/scsi/lpfc/lpfc_hbadisc.c | 96 ++++++++------- drivers/scsi/lpfc/lpfc_init.c | 66 +++++++++-- drivers/scsi/lpfc/lpfc_nportdisc.c | 82 ++++++++++--- drivers/scsi/lpfc/lpfc_vport.c | 24 ++-- 7 files changed, 300 insertions(+), 204 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index 59164c6aa28f..338b5dd10a92 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -45,6 +45,7 @@ void lpfc_init_link(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t, uint32_t); struct lpfc_vport *lpfc_find_vport_by_did(struct lpfc_hba *, uint32_t); void lpfc_cleanup_rpis(struct lpfc_vport *vport, int remove); int lpfc_linkdown(struct lpfc_hba *); +void lpfc_port_link_failure(struct lpfc_vport *); void lpfc_mbx_cmpl_read_la(struct lpfc_hba *, LPFC_MBOXQ_t *); void lpfc_mbx_cmpl_clear_la(struct lpfc_hba *, LPFC_MBOXQ_t *); @@ -74,6 +75,7 @@ void lpfc_disc_list_loopmap(struct lpfc_vport *); void lpfc_disc_start(struct lpfc_vport *); void lpfc_disc_flush_list(struct lpfc_vport *); void lpfc_cleanup_discovery_resources(struct lpfc_vport *); +void lpfc_cleanup(struct lpfc_vport *); void lpfc_disc_timeout(unsigned long); struct lpfc_nodelist *__lpfc_findnode_rpi(struct lpfc_vport *, uint16_t); @@ -91,6 +93,8 @@ void lpfc_do_scr_ns_plogi(struct lpfc_hba *, struct lpfc_vport *); int lpfc_check_sparm(struct lpfc_vport *, struct lpfc_nodelist *, struct serv_parm *, uint32_t); int lpfc_els_abort(struct lpfc_hba *, struct lpfc_nodelist *); +void lpfc_more_plogi(struct lpfc_vport *); +void lpfc_end_rscn(struct lpfc_vport *); int lpfc_els_chk_latt(struct lpfc_vport *); int lpfc_els_abort_flogi(struct lpfc_hba *); int lpfc_initial_flogi(struct lpfc_vport *); diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h index c9422a8423ca..99bc1a1ecac2 100644 --- a/drivers/scsi/lpfc/lpfc_disc.h +++ b/drivers/scsi/lpfc/lpfc_disc.h @@ -103,7 +103,6 @@ struct lpfc_nodelist { #define NLP_RM_DFLT_RPI 0x4000000 /* need to remove leftover dflt RPI */ #define NLP_NODEV_REMOVE 0x8000000 /* Defer removal till discovery ends */ #define NLP_TARGET_REMOVE 0x10000000 /* Target remove in process */ -#define NLP_DELAYED_RM 0x20000000 /* Defer UNUSED List removal */ /* There are 4 different double linked lists nodelist entries can reside on. * The Port Login (PLOGI) list and Address Discovery (ADISC) list are used diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 813eeca7ce1e..0a5006ea9909 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -575,8 +575,13 @@ flogifail: /* Start discovery */ lpfc_disc_start(vport); + } else if (((irsp->ulpStatus != IOSTAT_LOCAL_REJECT) || + ((irsp->un.ulpWord[4] != IOERR_SLI_ABORTED) && + (irsp->un.ulpWord[4] != IOERR_SLI_DOWN))) && + (phba->link_state != LPFC_CLEAR_LA)) { + /* If FLOGI failed enable link interrupt. */ + lpfc_issue_clear_la(phba, vport); } - out: lpfc_els_free_iocb(phba, cmdiocb); } @@ -711,13 +716,8 @@ lpfc_initial_flogi(struct lpfc_vport *vport) lpfc_nlp_init(vport, ndlp, Fabric_DID); } else { lpfc_dequeue_node(vport, ndlp); - - /* If we go thru this path, Fabric_DID ndlp is in the process - * of being removed. We need to bump the reference count by 1 - * so it stays around all through this link up period. - */ - lpfc_nlp_get(ndlp); } + if (lpfc_issue_els_flogi(vport, ndlp, 0)) { lpfc_nlp_put(ndlp); } @@ -746,7 +746,8 @@ lpfc_initial_fdisc(struct lpfc_vport *vport) } return 1; } -static void + +void lpfc_more_plogi(struct lpfc_vport *vport) { int sentplogi; @@ -813,8 +814,12 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp, lpfc_nlp_set_state(vport, new_ndlp, ndlp->nlp_state); /* Move this back to NPR state */ - if (memcmp(&ndlp->nlp_portname, name, sizeof(struct lpfc_name)) == 0) + if (memcmp(&ndlp->nlp_portname, name, sizeof(struct lpfc_name)) == 0) { + /* The new_ndlp is replacing ndlp totally, so we need + * to put ndlp on UNUSED list and try to free it. + */ lpfc_drop_node(vport, ndlp); + } else { lpfc_unreg_rpi(vport, ndlp); ndlp->nlp_DID = 0; /* Two ndlps cannot have the same did */ @@ -823,6 +828,27 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp, return new_ndlp; } +void +lpfc_end_rscn(struct lpfc_vport *vport) +{ + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + + if (vport->fc_flag & FC_RSCN_MODE) { + /* + * Check to see if more RSCNs came in while we were + * processing this one. + */ + if (vport->fc_rscn_id_cnt || + (vport->fc_flag & FC_RSCN_DISCOVERY) != 0) + lpfc_els_handle_rscn(vport); + else { + spin_lock_irq(shost->host_lock); + vport->fc_flag &= ~FC_RSCN_MODE; + spin_unlock_irq(shost->host_lock); + } + } +} + static void lpfc_cmpl_els_plogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_iocbq *rspiocb) @@ -893,13 +919,6 @@ lpfc_cmpl_els_plogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, goto out; } /* PLOGI failed */ - if (ndlp->nlp_DID == NameServer_DID) { - lpfc_vport_set_state(vport, FC_VPORT_FAILED); - lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, - "0250 Nameserver login error: " - "0x%x / 0x%x\n", - irsp->ulpStatus, irsp->un.ulpWord[4]); - } /* Do not call DSM for lpfc_els_abort'ed ELS cmds */ if (lpfc_error_lost_link(irsp)) { rc = NLP_STE_FREED_NODE; @@ -927,20 +946,7 @@ lpfc_cmpl_els_plogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, spin_unlock_irq(shost->host_lock); lpfc_can_disctmo(vport); - if (vport->fc_flag & FC_RSCN_MODE) { - /* - * Check to see if more RSCNs came in while - * we were processing this one. - */ - if ((vport->fc_rscn_id_cnt == 0) && - (!(vport->fc_flag & FC_RSCN_DISCOVERY))) { - spin_lock_irq(shost->host_lock); - vport->fc_flag &= ~FC_RSCN_MODE; - spin_unlock_irq(shost->host_lock); - } else { - lpfc_els_handle_rscn(vport); - } - } + lpfc_end_rscn(vport); } } @@ -1160,8 +1166,6 @@ lpfc_more_adisc(struct lpfc_vport *vport) static void lpfc_rscn_disc(struct lpfc_vport *vport) { - struct Scsi_Host *shost = lpfc_shost_from_vport(vport); - lpfc_can_disctmo(vport); /* RSCN discovery */ @@ -1170,19 +1174,7 @@ lpfc_rscn_disc(struct lpfc_vport *vport) if (lpfc_els_disc_plogi(vport)) return; - if (vport->fc_flag & FC_RSCN_MODE) { - /* Check to see if more RSCNs came in while we were - * processing this one. - */ - if ((vport->fc_rscn_id_cnt == 0) && - (!(vport->fc_flag & FC_RSCN_DISCOVERY))) { - spin_lock_irq(shost->host_lock); - vport->fc_flag &= ~FC_RSCN_MODE; - spin_unlock_irq(shost->host_lock); - } else { - lpfc_els_handle_rscn(vport); - } - } + lpfc_end_rscn(vport); } static void @@ -1632,27 +1624,6 @@ lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry) return 0; } -static void -lpfc_end_rscn(struct lpfc_vport *vport) -{ - struct Scsi_Host *shost = lpfc_shost_from_vport(vport); - - if (vport->fc_flag & FC_RSCN_MODE) { - /* - * Check to see if more RSCNs came in while we were - * processing this one. - */ - if (vport->fc_rscn_id_cnt || - (vport->fc_flag & FC_RSCN_DISCOVERY) != 0) - lpfc_els_handle_rscn(vport); - else { - spin_lock_irq(shost->host_lock); - vport->fc_flag &= ~FC_RSCN_MODE; - spin_unlock_irq(shost->host_lock); - } - } -} - void lpfc_cancel_retry_delay_tmo(struct lpfc_vport *vport, struct lpfc_nodelist *nlp) { @@ -2068,6 +2039,32 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, return 0; } +int +lpfc_els_free_data(struct lpfc_hba *phba, struct lpfc_dmabuf *buf_ptr1) +{ + struct lpfc_dmabuf *buf_ptr; + + /* Free the response before processing the command. */ + if (!list_empty(&buf_ptr1->list)) { + list_remove_head(&buf_ptr1->list, buf_ptr, + struct lpfc_dmabuf, + list); + lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys); + kfree(buf_ptr); + } + lpfc_mbuf_free(phba, buf_ptr1->virt, buf_ptr1->phys); + kfree(buf_ptr1); + return 0; +} + +int +lpfc_els_free_bpl(struct lpfc_hba *phba, struct lpfc_dmabuf *buf_ptr) +{ + lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys); + kfree(buf_ptr); + return 0; +} + int lpfc_els_free_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *elsiocb) { @@ -2080,22 +2077,12 @@ lpfc_els_free_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *elsiocb) /* context2 = cmd, context2->next = rsp, context3 = bpl */ if (elsiocb->context2) { buf_ptr1 = (struct lpfc_dmabuf *) elsiocb->context2; - /* Free the response before processing the command. */ - if (!list_empty(&buf_ptr1->list)) { - list_remove_head(&buf_ptr1->list, buf_ptr, - struct lpfc_dmabuf, - list); - lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys); - kfree(buf_ptr); - } - lpfc_mbuf_free(phba, buf_ptr1->virt, buf_ptr1->phys); - kfree(buf_ptr1); + lpfc_els_free_data(phba, buf_ptr1); } if (elsiocb->context3) { buf_ptr = (struct lpfc_dmabuf *) elsiocb->context3; - lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys); - kfree(buf_ptr); + lpfc_els_free_bpl(phba, buf_ptr); } lpfc_sli_release_iocbq(phba, elsiocb); return 0; @@ -2119,15 +2106,15 @@ lpfc_cmpl_els_logo_acc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, "Data: x%x x%x x%x\n", ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_state, ndlp->nlp_rpi); - switch (ndlp->nlp_state) { - case NLP_STE_UNUSED_NODE: /* node is just allocated */ - lpfc_drop_node(vport, ndlp); - break; - case NLP_STE_NPR_NODE: /* NPort Recovery mode */ - lpfc_unreg_rpi(vport, ndlp); - break; - default: - break; + + if (ndlp->nlp_state == NLP_STE_NPR_NODE) { + /* NPort Recovery mode or node is just allocated */ + if (!lpfc_nlp_not_used(ndlp)) { + /* If the ndlp is being used by another discovery + * thread, just unregister the RPI. + */ + lpfc_unreg_rpi(vport, ndlp); + } } lpfc_els_free_iocb(phba, cmdiocb); return; @@ -2160,15 +2147,27 @@ lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) cmdiocb->context1; struct lpfc_vport *vport = ndlp ? ndlp->vport : NULL; struct Scsi_Host *shost = vport ? lpfc_shost_from_vport(vport) : NULL; - IOCB_t *irsp; + IOCB_t *irsp; + uint8_t *pcmd; LPFC_MBOXQ_t *mbox = NULL; struct lpfc_dmabuf *mp = NULL; + uint32_t ls_rjt = 0; irsp = &rspiocb->iocb; if (cmdiocb->context_un.mbox) mbox = cmdiocb->context_un.mbox; + /* First determine if this is a LS_RJT cmpl */ + pcmd = (uint8_t *) (((struct lpfc_dmabuf *) cmdiocb->context2)->virt); + if (*((uint32_t *) (pcmd)) == ELS_CMD_LS_RJT) { + /* A LS_RJT associated with Default RPI cleanup + * has its own seperate code path. + */ + if (!(ndlp->nlp_flag & NLP_RM_DFLT_RPI)) + ls_rjt = 1; + } + /* Check to see if link went down during discovery */ if (!ndlp || lpfc_els_chk_latt(vport)) { if (mbox) { @@ -2247,7 +2246,16 @@ out: spin_lock_irq(shost->host_lock); ndlp->nlp_flag &= ~(NLP_ACC_REGLOGIN | NLP_RM_DFLT_RPI); spin_unlock_irq(shost->host_lock); + + /* If the node is not being used by another discovery thread, + * and we are sending a reject, we are done with it. + * Release driver reference count here and free associated + * resources. + */ + if (ls_rjt) + lpfc_nlp_not_used(ndlp); } + lpfc_els_free_iocb(phba, cmdiocb); return; } @@ -2418,18 +2426,6 @@ lpfc_els_rsp_reject(struct lpfc_vport *vport, uint32_t rejectError, elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp; rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0); - /* If the node is in the UNUSED state, and we are sending - * a reject, we are done with it. Release driver reference - * count here. The outstanding els will release its reference on - * completion, as long as the ndlp stays in the UNUSED list, - * and the node can be freed then. - */ - if ((ndlp->nlp_state == NLP_STE_UNUSED_NODE) && - !(ndlp->nlp_flag & NLP_DELAYED_RM)) { - ndlp->nlp_flag |= NLP_DELAYED_RM; - lpfc_nlp_put(ndlp); - } - if (rc == IOCB_ERROR) { lpfc_els_free_iocb(phba, elsiocb); return 1; @@ -2715,7 +2711,10 @@ lpfc_els_disc_plogi(struct lpfc_vport *vport) } } } - if (sentplogi == 0) { + if (sentplogi) { + lpfc_set_disctmo(vport); + } + else { spin_lock_irq(shost->host_lock); vport->fc_flag &= ~FC_NLP_MORE; spin_unlock_irq(shost->host_lock); @@ -3533,6 +3532,7 @@ lpfc_els_rcv_fan(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, * other NLP_FABRIC logins */ lpfc_drop_node(vport, ndlp); + } else if (!(ndlp->nlp_flag & NLP_NPR_ADISC)) { /* Fail outstanding I/O now since this * device is marked for PLOGI @@ -3781,6 +3781,7 @@ static void lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_vport *vport, struct lpfc_iocbq *elsiocb) { + struct Scsi_Host *shost; struct lpfc_nodelist *ndlp; struct ls_rjt stat; uint32_t *payload; @@ -3826,6 +3827,14 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, ndlp->nlp_type |= NLP_FABRIC; } } + else { + if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) { + /* This is simular to the new node path */ + lpfc_nlp_get(ndlp); + lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE); + newnode = 1; + } + } phba->fc_stat.elsRcvFrame++; if (elsiocb->context1) @@ -3853,6 +3862,12 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, rjt_err = LSRJT_UNABLE_TPC; break; } + + shost = lpfc_shost_from_vport(vport); + spin_lock_irq(shost->host_lock); + ndlp->nlp_flag &= ~NLP_TARGET_REMOVE; + spin_unlock_irq(shost->host_lock); + lpfc_disc_state_machine(vport, ndlp, elsiocb, NLP_EVT_RCV_PLOGI); @@ -3864,7 +3879,7 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, phba->fc_stat.elsRcvFLOGI++; lpfc_els_rcv_flogi(vport, elsiocb, ndlp); - if (newnode && (!(ndlp->nlp_flag & NLP_DELAYED_RM))) + if (newnode) lpfc_nlp_put(ndlp); break; case ELS_CMD_LOGO: @@ -3894,7 +3909,7 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, case ELS_CMD_RSCN: phba->fc_stat.elsRcvRSCN++; lpfc_els_rcv_rscn(vport, elsiocb, ndlp); - if (newnode && (!(ndlp->nlp_flag & NLP_DELAYED_RM))) + if (newnode) lpfc_nlp_put(ndlp); break; case ELS_CMD_ADISC: @@ -3966,7 +3981,7 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, phba->fc_stat.elsRcvLIRR++; lpfc_els_rcv_lirr(vport, elsiocb, ndlp); - if (newnode && (!(ndlp->nlp_flag & NLP_DELAYED_RM))) + if (newnode) lpfc_nlp_put(ndlp); break; case ELS_CMD_RPS: @@ -3976,7 +3991,7 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, phba->fc_stat.elsRcvRPS++; lpfc_els_rcv_rps(vport, elsiocb, ndlp); - if (newnode && (!(ndlp->nlp_flag & NLP_DELAYED_RM))) + if (newnode) lpfc_nlp_put(ndlp); break; case ELS_CMD_RPL: @@ -3986,7 +4001,7 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, phba->fc_stat.elsRcvRPL++; lpfc_els_rcv_rpl(vport, elsiocb, ndlp); - if (newnode && (!(ndlp->nlp_flag & NLP_DELAYED_RM))) + if (newnode) lpfc_nlp_put(ndlp); break; case ELS_CMD_RNID: @@ -3996,7 +4011,7 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, phba->fc_stat.elsRcvRNID++; lpfc_els_rcv_rnid(vport, elsiocb, ndlp); - if (newnode && (!(ndlp->nlp_flag & NLP_DELAYED_RM))) + if (newnode) lpfc_nlp_put(ndlp); break; default: @@ -4011,7 +4026,7 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, "0115 Unknown ELS command x%x " "received from NPORT x%x\n", cmd, did); - if (newnode && (!(ndlp->nlp_flag & NLP_DELAYED_RM))) + if (newnode) lpfc_nlp_put(ndlp); break; } diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index e181a98caf16..f64ce88e8a06 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -157,6 +157,8 @@ lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp) struct lpfc_vport *vport; struct lpfc_hba *phba; uint8_t *name; + int put_node; + int put_rport; int warn_on = 0; rport = ndlp->rport; @@ -178,9 +180,6 @@ lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp) return; if (ndlp->nlp_type & NLP_FABRIC) { - int put_node; - int put_rport; - /* We will clean up these Nodes in linkup */ put_node = rdata->pnode != NULL; put_rport = ndlp->rport != NULL; @@ -222,23 +221,20 @@ lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp) ndlp->nlp_state, ndlp->nlp_rpi); } + put_node = rdata->pnode != NULL; + put_rport = ndlp->rport != NULL; + rdata->pnode = NULL; + ndlp->rport = NULL; + if (put_node) + lpfc_nlp_put(ndlp); + if (put_rport) + put_device(&rport->dev); + if (!(vport->load_flag & FC_UNLOADING) && !(ndlp->nlp_flag & NLP_DELAY_TMO) && !(ndlp->nlp_flag & NLP_NPR_2B_DISC) && - (ndlp->nlp_state != NLP_STE_UNMAPPED_NODE)) + (ndlp->nlp_state != NLP_STE_UNMAPPED_NODE)) { lpfc_disc_state_machine(vport, ndlp, NULL, NLP_EVT_DEVICE_RM); - else { - int put_node; - int put_rport; - - put_node = rdata->pnode != NULL; - put_rport = ndlp->rport != NULL; - rdata->pnode = NULL; - ndlp->rport = NULL; - if (put_node) - lpfc_nlp_put(ndlp); - if (put_rport) - put_device(&rport->dev); } } @@ -546,11 +542,9 @@ lpfc_cleanup_rpis(struct lpfc_vport *vport, int remove) } } -static void +void lpfc_port_link_failure(struct lpfc_vport *vport) { - struct lpfc_nodelist *ndlp, *next_ndlp; - /* Cleanup any outstanding RSCN activity */ lpfc_els_flush_rscn(vport); @@ -559,11 +553,6 @@ lpfc_port_link_failure(struct lpfc_vport *vport) lpfc_cleanup_rpis(vport, 0); - /* free any ndlp's on unused list */ - list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) - if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) - lpfc_drop_node(vport, ndlp); - /* Turn off discovery timer if its running */ lpfc_can_disctmo(vport); } @@ -670,7 +659,6 @@ static void lpfc_linkup_port(struct lpfc_vport *vport) { struct Scsi_Host *shost = lpfc_shost_from_vport(vport); - struct lpfc_nodelist *ndlp, *next_ndlp; struct lpfc_hba *phba = vport->phba; if ((vport->load_flag & FC_UNLOADING) != 0) @@ -697,11 +685,6 @@ lpfc_linkup_port(struct lpfc_vport *vport) if (vport->fc_flag & FC_LBIT) lpfc_linkup_cleanup_nodes(vport); - /* free any ndlp's in unused state */ - list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, - nlp_listp) - if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) - lpfc_drop_node(vport, ndlp); } static int @@ -1345,7 +1328,9 @@ out: lpfc_mbuf_free(phba, mp->virt, mp->phys); kfree(mp); mempool_free(pmb, phba->mbox_mem_pool); - lpfc_drop_node(vport, ndlp); + + /* If no other thread is using the ndlp, free it */ + lpfc_nlp_not_used(ndlp); if (phba->fc_topology == TOPOLOGY_LOOP) { /* @@ -1605,16 +1590,6 @@ lpfc_nlp_set_state(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, ndlp->nlp_type &= ~NLP_FC_NODE; } - if ((old_state == NLP_STE_UNUSED_NODE) && - (state != NLP_STE_UNUSED_NODE) && - (ndlp->nlp_flag & NLP_DELAYED_RM)) { - /* We are using the ndlp after all, so reverse - * the delayed removal of it. - */ - ndlp->nlp_flag &= ~NLP_DELAYED_RM; - lpfc_nlp_get(ndlp); - } - if (list_empty(&ndlp->nlp_listp)) { spin_lock_irq(shost->host_lock); list_add_tail(&ndlp->nlp_listp, &vport->fc_nodes); @@ -1646,9 +1621,16 @@ lpfc_dequeue_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) void lpfc_drop_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) { + /* + * Use of lpfc_drop_node and UNUSED list. lpfc_drop_node should + * be used if we wish to issue the "last" lpfc_nlp_put() to remove + * the ndlp from the vport. The ndlp resides on the UNUSED list + * until ALL other outstanding threads have completed. Thus, if a + * ndlp is on the UNUSED list already, we should never do another + * lpfc_drop_node() on it. + */ lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNUSED_NODE); - if (!(ndlp->nlp_flag & NLP_DELAYED_RM)) - lpfc_nlp_put(ndlp); + lpfc_nlp_put(ndlp); return; } @@ -2116,6 +2098,12 @@ lpfc_setup_disc_node(struct lpfc_vport *vport, uint32_t did) } if (vport->fc_flag & FC_RSCN_MODE) { if (lpfc_rscn_payload_check(vport, did)) { + /* If we've already recieved a PLOGI from this NPort + * we don't need to try to discover it again. + */ + if (ndlp->nlp_flag & NLP_RCV_PLOGI) + return NULL; + spin_lock_irq(shost->host_lock); ndlp->nlp_flag |= NLP_NPR_2B_DISC; spin_unlock_irq(shost->host_lock); @@ -2128,8 +2116,13 @@ lpfc_setup_disc_node(struct lpfc_vport *vport, uint32_t did) } else ndlp = NULL; } else { + /* If we've already recieved a PLOGI from this NPort, + * or we are already in the process of discovery on it, + * we don't need to try to discover it again. + */ if (ndlp->nlp_state == NLP_STE_ADISC_ISSUE || - ndlp->nlp_state == NLP_STE_PLOGI_ISSUE) + ndlp->nlp_state == NLP_STE_PLOGI_ISSUE || + ndlp->nlp_flag & NLP_RCV_PLOGI) return NULL; lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE); spin_lock_irq(shost->host_lock); @@ -2497,6 +2490,7 @@ lpfc_disc_timeout_handler(struct lpfc_vport *vport) if (ndlp->nlp_type & NLP_FABRIC) { /* Clean up the ndlp on Fabric connections */ lpfc_drop_node(vport, ndlp); + } else if (!(ndlp->nlp_flag & NLP_NPR_ADISC)) { /* Fail outstanding IO now since device * is marked for PLOGI. @@ -2515,7 +2509,7 @@ lpfc_disc_timeout_handler(struct lpfc_vport *vport) /* Initial FLOGI timeout */ lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, "0222 Initial %s timeout\n", - vport->vpi ? "FLOGI" : "FDISC"); + vport->vpi ? "FDISC" : "FLOGI"); /* Assume no Fabric and go on with discovery. * Check for outstanding ELS FLOGI to abort. @@ -2537,10 +2531,10 @@ lpfc_disc_timeout_handler(struct lpfc_vport *vport) /* Next look for NameServer ndlp */ ndlp = lpfc_findnode_did(vport, NameServer_DID); if (ndlp) - lpfc_nlp_put(ndlp); - /* Start discovery */ - lpfc_disc_start(vport); - break; + lpfc_els_abort(phba, ndlp); + + /* ReStart discovery */ + goto restart_disc; case LPFC_NS_QRY: /* Check for wait for NameServer Rsp timeout */ @@ -2559,6 +2553,7 @@ lpfc_disc_timeout_handler(struct lpfc_vport *vport) } vport->fc_ns_retry = 0; +restart_disc: /* * Discovery is over. * set port_state to PORT_READY if SLI2. @@ -2731,8 +2726,7 @@ __lpfc_find_node(struct lpfc_vport *vport, node_filter filter, void *param) struct lpfc_nodelist *ndlp; list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { - if (ndlp->nlp_state != NLP_STE_UNUSED_NODE && - filter(ndlp, param)) + if (filter(ndlp, param)) return ndlp; } return NULL; diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 729694d97597..ceb185fa3216 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -1334,15 +1334,35 @@ lpfc_hba_init(struct lpfc_hba *phba, uint32_t *hbainit) kfree(HashWorking); } -static void +void lpfc_cleanup(struct lpfc_vport *vport) { + struct lpfc_hba *phba = vport->phba; struct lpfc_nodelist *ndlp, *next_ndlp; - /* clean up phba - lpfc specific */ - lpfc_can_disctmo(vport); - list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) - lpfc_nlp_put(ndlp); + if (phba->link_state > LPFC_LINK_DOWN) + lpfc_port_link_failure(vport); + + list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { + if (ndlp->nlp_type & NLP_FABRIC) + lpfc_disc_state_machine(vport, ndlp, NULL, + NLP_EVT_DEVICE_RECOVERY); + lpfc_disc_state_machine(vport, ndlp, NULL, + NLP_EVT_DEVICE_RM); + } + + /* At this point, ALL ndlp's should be gone */ + while (!list_empty(&vport->fc_nodes)) { + + list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, + nlp_listp) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, + "0233 Nodelist x%x not free: %d\n", + ndlp->nlp_DID, + atomic_read(&ndlp->kref.refcount)); + lpfc_drop_node(vport, ndlp); + } + } return; } @@ -1463,6 +1483,8 @@ lpfc_offline_prep(struct lpfc_hba * phba) { struct lpfc_vport *vport = phba->pport; struct lpfc_nodelist *ndlp, *next_ndlp; + struct lpfc_vport **vports; + int i; if (vport->fc_flag & FC_OFFLINE_MODE) return; @@ -1471,10 +1493,32 @@ lpfc_offline_prep(struct lpfc_hba * phba) lpfc_linkdown(phba); - /* Issue an unreg_login to all nodes */ - list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) - if (ndlp->nlp_state != NLP_STE_UNUSED_NODE) - lpfc_unreg_rpi(vport, ndlp); + /* Issue an unreg_login to all nodes on all vports */ + vports = lpfc_create_vport_work_array(phba); + if (vports != NULL) { + for(i = 0; i < LPFC_MAX_VPORTS && vports[i] != NULL; i++) { + struct Scsi_Host *shost; + + shost = lpfc_shost_from_vport(vports[i]); + list_for_each_entry_safe(ndlp, next_ndlp, + &vports[i]->fc_nodes, + nlp_listp) { + if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) + continue; + if (ndlp->nlp_type & NLP_FABRIC) { + lpfc_disc_state_machine(vports[i], ndlp, + NULL, NLP_EVT_DEVICE_RECOVERY); + lpfc_disc_state_machine(vports[i], ndlp, + NULL, NLP_EVT_DEVICE_RM); + } + spin_lock_irq(shost->host_lock); + ndlp->nlp_flag &= ~NLP_NPR_ADISC; + spin_unlock_irq(shost->host_lock); + lpfc_unreg_rpi(vports[i], ndlp); + } + } + } + lpfc_destroy_vport_work_array(vports); lpfc_sli_flush_mbox_queue(phba); } @@ -1508,7 +1552,6 @@ lpfc_offline(struct lpfc_hba *phba) if (vports != NULL) for(i = 0; i < LPFC_MAX_VPORTS && vports[i] != NULL; i++) { shost = lpfc_shost_from_vport(vports[i]); - lpfc_cleanup(vports[i]); spin_lock_irq(shost->host_lock); vports[i]->work_port_events = 0; vports[i]->fc_flag |= FC_OFFLINE_MODE; @@ -2061,6 +2104,8 @@ lpfc_pci_remove_one(struct pci_dev *pdev) fc_remove_host(shost); scsi_remove_host(shost); + lpfc_cleanup(vport); + /* * Bring down the SLI Layer. This step disable all interrupts, * clears the rings, discards all mailbox commands, and resets @@ -2075,7 +2120,6 @@ lpfc_pci_remove_one(struct pci_dev *pdev) spin_unlock_irq(&phba->hbalock); lpfc_debugfs_terminate(vport); - lpfc_cleanup(vport); kthread_stop(phba->worker_thread); diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index 1a16ee9b2e87..bba1fb6103f6 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -406,6 +406,41 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, ndlp, mbox); return 1; } + + /* If the remote NPort logs into us, before we can initiate + * discovery to them, cleanup the NPort from discovery accordingly. + */ + if (ndlp->nlp_state == NLP_STE_NPR_NODE) { + spin_lock_irq(shost->host_lock); + ndlp->nlp_flag &= ~NLP_DELAY_TMO; + spin_unlock_irq(shost->host_lock); + del_timer_sync(&ndlp->nlp_delayfunc); + ndlp->nlp_last_elscmd = 0; + + if (!list_empty(&ndlp->els_retry_evt.evt_listp)) + list_del_init(&ndlp->els_retry_evt.evt_listp); + + if (ndlp->nlp_flag & NLP_NPR_2B_DISC) { + spin_lock_irq(shost->host_lock); + ndlp->nlp_flag &= ~NLP_NPR_2B_DISC; + spin_unlock_irq(shost->host_lock); + if (vport->num_disc_nodes) { + /* Check to see if there are more + * PLOGIs to be sent + */ + lpfc_more_plogi(vport); + + if (vport->num_disc_nodes == 0) { + spin_lock_irq(shost->host_lock); + vport->fc_flag &= ~FC_NDISC_ACTIVE; + spin_unlock_irq(shost->host_lock); + lpfc_can_disctmo(vport); + lpfc_end_rscn(vport); + } + } + } + } + lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp, mbox); return 1; @@ -500,12 +535,9 @@ lpfc_rcv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, spin_unlock_irq(shost->host_lock); ndlp->nlp_last_elscmd = ELS_CMD_PLOGI; - ndlp->nlp_prev_state = ndlp->nlp_state; - lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE); - } else { - ndlp->nlp_prev_state = ndlp->nlp_state; - lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNUSED_NODE); } + ndlp->nlp_prev_state = ndlp->nlp_state; + lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE); spin_lock_irq(shost->host_lock); ndlp->nlp_flag &= ~NLP_NPR_ADISC; @@ -593,6 +625,25 @@ lpfc_disc_illegal(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, return ndlp->nlp_state; } +static uint32_t +lpfc_cmpl_plogi_illegal(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, + void *arg, uint32_t evt) +{ + /* This transition is only legal if we previously + * rcv'ed a PLOGI. Since we don't want 2 discovery threads + * working on the same NPortID, do nothing for this thread + * to stop it. + */ + if (!(ndlp->nlp_flag & NLP_RCV_PLOGI)) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, + "0253 Illegal State Transition: node x%x " + "event x%x, state x%x Data: x%x x%x\n", + ndlp->nlp_DID, evt, ndlp->nlp_state, ndlp->nlp_rpi, + ndlp->nlp_flag); + } + return ndlp->nlp_state; +} + /* Start of Discovery State Machine routines */ static uint32_t @@ -604,11 +655,8 @@ lpfc_rcv_plogi_unused_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, cmdiocb = (struct lpfc_iocbq *) arg; if (lpfc_rcv_plogi(vport, ndlp, cmdiocb)) { - ndlp->nlp_prev_state = NLP_STE_UNUSED_NODE; - lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNUSED_NODE); return ndlp->nlp_state; } - lpfc_drop_node(vport, ndlp); return NLP_STE_FREED_NODE; } @@ -617,7 +665,6 @@ lpfc_rcv_els_unused_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, void *arg, uint32_t evt) { lpfc_issue_els_logo(vport, ndlp, 0); - lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNUSED_NODE); return ndlp->nlp_state; } @@ -632,7 +679,6 @@ lpfc_rcv_logo_unused_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, ndlp->nlp_flag |= NLP_LOGO_ACC; spin_unlock_irq(shost->host_lock); lpfc_els_rsp_acc(vport, ELS_CMD_ACC, cmdiocb, ndlp, NULL); - lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNUSED_NODE); return ndlp->nlp_state; } @@ -641,7 +687,6 @@ static uint32_t lpfc_cmpl_logo_unused_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, void *arg, uint32_t evt) { - lpfc_drop_node(vport, ndlp); return NLP_STE_FREED_NODE; } @@ -649,7 +694,6 @@ static uint32_t lpfc_device_rm_unused_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, void *arg, uint32_t evt) { - lpfc_drop_node(vport, ndlp); return NLP_STE_FREED_NODE; } @@ -864,7 +908,7 @@ out: /* Free this node since the driver cannot login or has the wrong sparm */ - lpfc_drop_node(vport, ndlp); + lpfc_nlp_not_used(ndlp); return NLP_STE_FREED_NODE; } @@ -1195,8 +1239,8 @@ lpfc_cmpl_reglogin_reglogin_issue(struct lpfc_vport *vport, * retry discovery. */ if (mb->mbxStatus == MBXERR_RPI_FULL) { - ndlp->nlp_prev_state = NLP_STE_UNUSED_NODE; - lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNUSED_NODE); + ndlp->nlp_prev_state = NLP_STE_REG_LOGIN_ISSUE; + lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE); return ndlp->nlp_state; } @@ -1376,7 +1420,7 @@ out: lpfc_issue_els_logo(vport, ndlp, 0); ndlp->nlp_prev_state = NLP_STE_PRLI_ISSUE; - lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNUSED_NODE); + lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE); return ndlp->nlp_state; } @@ -1751,7 +1795,7 @@ lpfc_cmpl_plogi_npr_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, irsp = &rspiocb->iocb; if (irsp->ulpStatus) { - lpfc_drop_node(vport, ndlp); + lpfc_nlp_not_used(ndlp); return NLP_STE_FREED_NODE; } return ndlp->nlp_state; @@ -1966,7 +2010,7 @@ static uint32_t (*lpfc_disc_action[NLP_STE_MAX_STATE * NLP_EVT_MAX_EVENT]) lpfc_rcv_padisc_reglogin_issue, /* RCV_ADISC */ lpfc_rcv_padisc_reglogin_issue, /* RCV_PDISC */ lpfc_rcv_prlo_reglogin_issue, /* RCV_PRLO */ - lpfc_disc_illegal, /* CMPL_PLOGI */ + lpfc_cmpl_plogi_illegal, /* CMPL_PLOGI */ lpfc_disc_illegal, /* CMPL_PRLI */ lpfc_disc_illegal, /* CMPL_LOGO */ lpfc_disc_illegal, /* CMPL_ADISC */ @@ -1980,7 +2024,7 @@ static uint32_t (*lpfc_disc_action[NLP_STE_MAX_STATE * NLP_EVT_MAX_EVENT]) lpfc_rcv_padisc_prli_issue, /* RCV_ADISC */ lpfc_rcv_padisc_prli_issue, /* RCV_PDISC */ lpfc_rcv_prlo_prli_issue, /* RCV_PRLO */ - lpfc_disc_illegal, /* CMPL_PLOGI */ + lpfc_cmpl_plogi_illegal, /* CMPL_PLOGI */ lpfc_cmpl_prli_prli_issue, /* CMPL_PRLI */ lpfc_disc_illegal, /* CMPL_LOGO */ lpfc_disc_illegal, /* CMPL_ADISC */ diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c index fd07d9d7f507..378c01200b02 100644 --- a/drivers/scsi/lpfc/lpfc_vport.c +++ b/drivers/scsi/lpfc/lpfc_vport.c @@ -445,7 +445,6 @@ int lpfc_vport_delete(struct fc_vport *fc_vport) { struct lpfc_nodelist *ndlp = NULL; - struct lpfc_nodelist *next_ndlp; struct Scsi_Host *shost = (struct Scsi_Host *) fc_vport->shost; struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data; struct lpfc_hba *phba = vport->phba; @@ -531,23 +530,20 @@ lpfc_vport_delete(struct fc_vport *fc_vport) } skip_logo: + lpfc_cleanup(vport); lpfc_sli_host_down(vport); - list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { - lpfc_disc_state_machine(vport, ndlp, NULL, - NLP_EVT_DEVICE_RECOVERY); - lpfc_disc_state_machine(vport, ndlp, NULL, - NLP_EVT_DEVICE_RM); - } - lpfc_stop_vport_timers(vport); lpfc_unreg_all_rpis(vport); - lpfc_unreg_default_rpis(vport); - /* - * Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi) does the - * scsi_host_put() to release the vport. - */ - lpfc_mbx_unreg_vpi(vport); + + if (!(phba->pport->load_flag & FC_UNLOADING)) { + lpfc_unreg_default_rpis(vport); + /* + * Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi) + * does the scsi_host_put() to release the vport. + */ + lpfc_mbx_unreg_vpi(vport); + } lpfc_free_vpi(phba, vport->vpi); vport->work_port_events = 0; -- cgit v1.2.3-59-g8ed1b From a8adb83208020c913f010cb4e26d09e25300db8e Mon Sep 17 00:00:00 2001 From: James Smart Date: Sat, 27 Oct 2007 13:37:53 -0400 Subject: [SCSI] lpfc 8.2.3 : Miscellaneous Small Fixes - part 2 Miscellaneous Small Fixes - part 2 - Fix ndlp left in PLOGI state after link up - Fix cannot rcv unsol ELS frames after running HBA resets for a few minutes - Fix HBQ buffer_count implemention - Fix RPI leak - Fix crash while deleting vports while HBA is reset - Revert the FCP Fbits offset back to 7 - Fix panic when deleting vports - Remove unused code in switch statement outside of a case - Reject PLOGI from invalid PName or NName of 0 - Ignore PLOGI responses from WWPName or WWNName of 0 - Fix debugfs hbqinfo display for ppc - Added 8G to list of supported speeds for sysfs parameter - Defer ndlp cleanup to dev-loss timeout handler - Added support for WRITE_VPARMS mailbox command by applications Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 1 + drivers/scsi/lpfc/lpfc_attr.c | 8 ++--- drivers/scsi/lpfc/lpfc_debugfs.c | 13 ++++---- drivers/scsi/lpfc/lpfc_disc.h | 1 + drivers/scsi/lpfc/lpfc_els.c | 34 ++++++++++++++----- drivers/scsi/lpfc/lpfc_hbadisc.c | 67 ++++++++++++++++++++++++++++++++++++-- drivers/scsi/lpfc/lpfc_hw.h | 7 ++-- drivers/scsi/lpfc/lpfc_init.c | 22 +++++++++---- drivers/scsi/lpfc/lpfc_nportdisc.c | 30 ++++++++++++++--- drivers/scsi/lpfc/lpfc_sli.c | 10 +++--- 10 files changed, 152 insertions(+), 41 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index ff6b7d33ccab..636a930a5739 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -367,6 +367,7 @@ struct lpfc_vport { struct hbq_s { uint16_t entry_count; /* Current number of HBQ slots */ + uint16_t buffer_count; /* Current number of buffers posted */ uint32_t next_hbqPutIdx; /* Index to next HBQ slot to use */ uint32_t hbqPutIdx; /* HBQ slot to use */ uint32_t local_hbqGetIdx; /* Local copy of Get index from Port */ diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index e8e9905828c9..4e9e890449a3 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -187,12 +187,9 @@ lpfc_state_show(struct class_device *cdev, char *buf) case LPFC_LINK_UP: case LPFC_CLEAR_LA: case LPFC_HBA_READY: - len += snprintf(buf + len, PAGE_SIZE-len, "Link Up - \n"); + len += snprintf(buf + len, PAGE_SIZE-len, "Link Up - "); switch (vport->port_state) { - len += snprintf(buf + len, PAGE_SIZE-len, - "initializing\n"); - break; case LPFC_LOCAL_CFG_LINK: len += snprintf(buf + len, PAGE_SIZE-len, "Configuring Link\n"); @@ -1759,7 +1756,6 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr, switch (phba->sysfs_mbox.mbox->mb.mbxCommand) { /* Offline only */ - case MBX_WRITE_NV: case MBX_INIT_LINK: case MBX_DOWN_LINK: case MBX_CONFIG_LINK: @@ -1782,6 +1778,8 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr, spin_unlock_irq(&phba->hbalock); return -EPERM; } + case MBX_WRITE_NV: + case MBX_WRITE_VPARMS: case MBX_LOAD_SM: case MBX_READ_NV: case MBX_READ_CONFIG: diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index d6a98bc970ff..da607c775cfc 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -243,16 +243,17 @@ lpfc_debugfs_hbqinfo_data(struct lpfc_hba *phba, char *buf, int size) raw_index = phba->hbq_get[i]; getidx = le32_to_cpu(raw_index); len += snprintf(buf+len, size-len, - "entrys:%d Put:%d nPut:%d localGet:%d hbaGet:%d\n", - hbqs->entry_count, hbqs->hbqPutIdx, hbqs->next_hbqPutIdx, - hbqs->local_hbqGetIdx, getidx); + "entrys:%d bufcnt:%d Put:%d nPut:%d localGet:%d hbaGet:%d\n", + hbqs->entry_count, hbqs->buffer_count, hbqs->hbqPutIdx, + hbqs->next_hbqPutIdx, hbqs->local_hbqGetIdx, getidx); hbqe = (struct lpfc_hbq_entry *) phba->hbqs[i].hbq_virt; for (j=0; jentry_count; j++) { len += snprintf(buf+len, size-len, "%03d: %08x %04x %05x ", j, - hbqe->bde.addrLow, hbqe->bde.tus.w, hbqe->buffer_tag); - + le32_to_cpu(hbqe->bde.addrLow), + le32_to_cpu(hbqe->bde.tus.w), + le32_to_cpu(hbqe->buffer_tag)); i = 0; found = 0; @@ -276,7 +277,7 @@ lpfc_debugfs_hbqinfo_data(struct lpfc_hba *phba, char *buf, int size) list_for_each_entry(d_buf, &hbqs->hbq_buffer_list, list) { hbq_buf = container_of(d_buf, struct hbq_dmabuf, dbuf); phys = ((uint64_t)hbq_buf->dbuf.phys & 0xffffffff); - if (phys == hbqe->bde.addrLow) { + if (phys == le32_to_cpu(hbqe->bde.addrLow)) { len += snprintf(buf+len, size-len, "Buf%d: %p %06x\n", i, hbq_buf->dbuf.virt, hbq_buf->tag); diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h index 99bc1a1ecac2..cfe81c50529a 100644 --- a/drivers/scsi/lpfc/lpfc_disc.h +++ b/drivers/scsi/lpfc/lpfc_disc.h @@ -91,6 +91,7 @@ struct lpfc_nodelist { #define NLP_LOGO_SND 0x100 /* sent LOGO request for this entry */ #define NLP_RNID_SND 0x400 /* sent RNID request for this entry */ #define NLP_ELS_SND_MASK 0x7e0 /* sent ELS request for this entry */ +#define NLP_DEFER_RM 0x10000 /* Remove this ndlp if no longer used */ #define NLP_DELAY_TMO 0x20000 /* delay timeout is running for node */ #define NLP_NPR_2B_DISC 0x40000 /* node is included in num_disc_nodes */ #define NLP_RCV_PLOGI 0x80000 /* Rcv'ed PLOGI from remote system */ diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 0a5006ea9909..9315c3c2e6f6 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -2069,9 +2069,25 @@ int lpfc_els_free_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *elsiocb) { struct lpfc_dmabuf *buf_ptr, *buf_ptr1; + struct lpfc_nodelist *ndlp; - if (elsiocb->context1) { - lpfc_nlp_put(elsiocb->context1); + ndlp = (struct lpfc_nodelist *)elsiocb->context1; + if (ndlp) { + if (ndlp->nlp_flag & NLP_DEFER_RM) { + lpfc_nlp_put(ndlp); + + /* If the ndlp is not being used by another discovery + * thread, free it. + */ + if (!lpfc_nlp_not_used(ndlp)) { + /* If ndlp is being used by another discovery + * thread, just clear NLP_DEFER_RM + */ + ndlp->nlp_flag &= ~NLP_DEFER_RM; + } + } + else + lpfc_nlp_put(ndlp); elsiocb->context1 = NULL; } /* context2 = cmd, context2->next = rsp, context3 = bpl */ @@ -2130,13 +2146,15 @@ lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) lpfc_mbuf_free(phba, mp->virt, mp->phys); kfree(mp); mempool_free(pmb, phba->mbox_mem_pool); - lpfc_nlp_put(ndlp); + if (ndlp) { + lpfc_nlp_put(ndlp); - /* This is the end of the default RPI cleanup logic for this - * ndlp. If no other discovery threads are using this ndlp. - * we should free all resources associated with it. - */ - lpfc_nlp_not_used(ndlp); + /* This is the end of the default RPI cleanup logic for this + * ndlp. If no other discovery threads are using this ndlp. + * we should free all resources associated with it. + */ + lpfc_nlp_not_used(ndlp); + } return; } diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index f64ce88e8a06..371f41e886d6 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -108,6 +108,8 @@ lpfc_dev_loss_tmo_callbk(struct fc_rport *rport) struct lpfc_vport *vport; struct lpfc_hba *phba; struct lpfc_work_evt *evtp; + int put_node; + int put_rport; rdata = rport->dd_data; ndlp = rdata->pnode; @@ -128,6 +130,25 @@ lpfc_dev_loss_tmo_callbk(struct fc_rport *rport) "rport devlosscb: sid:x%x did:x%x flg:x%x", ndlp->nlp_sid, ndlp->nlp_DID, ndlp->nlp_flag); + /* Don't defer this if we are in the process of deleting the vport + * or unloading the driver. The unload will cleanup the node + * appropriately we just need to cleanup the ndlp rport info here. + */ + if (vport->load_flag & FC_UNLOADING) { + put_node = rdata->pnode != NULL; + put_rport = ndlp->rport != NULL; + rdata->pnode = NULL; + ndlp->rport = NULL; + if (put_node) + lpfc_nlp_put(ndlp); + if (put_rport) + put_device(&rport->dev); + return; + } + + if (ndlp->nlp_state == NLP_STE_MAPPED_NODE) + return; + evtp = &ndlp->dev_loss_evt; if (!list_empty(&evtp->evt_listp)) @@ -175,8 +196,23 @@ lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp) "rport devlosstmo:did:x%x type:x%x id:x%x", ndlp->nlp_DID, ndlp->nlp_type, rport->scsi_target_id); - if (!(vport->load_flag & FC_UNLOADING) && - ndlp->nlp_state == NLP_STE_MAPPED_NODE) + /* Don't defer this if we are in the process of deleting the vport + * or unloading the driver. The unload will cleanup the node + * appropriately we just need to cleanup the ndlp rport info here. + */ + if (vport->load_flag & FC_UNLOADING) { + put_node = rdata->pnode != NULL; + put_rport = ndlp->rport != NULL; + rdata->pnode = NULL; + ndlp->rport = NULL; + if (put_node) + lpfc_nlp_put(ndlp); + if (put_rport) + put_device(&rport->dev); + return; + } + + if (ndlp->nlp_state == NLP_STE_MAPPED_NODE) return; if (ndlp->nlp_type & NLP_FABRIC) { @@ -1965,12 +2001,39 @@ lpfc_cleanup_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) static void lpfc_nlp_remove(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) { + struct lpfc_hba *phba = vport->phba; struct lpfc_rport_data *rdata; + LPFC_MBOXQ_t *mbox; + int rc; if (ndlp->nlp_flag & NLP_DELAY_TMO) { lpfc_cancel_retry_delay_tmo(vport, ndlp); } + if (ndlp->nlp_flag & NLP_DEFER_RM && !ndlp->nlp_rpi) { + /* For this case we need to cleanup the default rpi + * allocated by the firmware. + */ + if ((mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL)) + != NULL) { + rc = lpfc_reg_login(phba, vport->vpi, ndlp->nlp_DID, + (uint8_t *) &vport->fc_sparam, mbox, 0); + if (rc) { + mempool_free(mbox, phba->mbox_mem_pool); + } + else { + mbox->mbox_flag |= LPFC_MBX_IMED_UNREG; + mbox->mbox_cmpl = lpfc_mbx_cmpl_dflt_rpi; + mbox->vport = vport; + mbox->context2 = 0; + rc =lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); + if (rc == MBX_NOT_FINISHED) { + mempool_free(mbox, phba->mbox_mem_pool); + } + } + } + } + lpfc_cleanup_node(vport, ndlp); /* diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index b075d5956488..8635b9294640 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -153,11 +153,7 @@ struct lpfc_sli_ct_request { struct gff_acc { uint8_t fbits[128]; } gff_acc; -#ifdef __BIG_ENDIAN_BITFIELD #define FCP_TYPE_FEATURE_OFFSET 7 -#else /* __LITTLE_ENDIAN_BITFIELD */ -#define FCP_TYPE_FEATURE_OFFSET 4 -#endif struct rff { uint32_t PortId; uint8_t reserved[2]; @@ -1288,8 +1284,9 @@ typedef struct { /* FireFly BIU registers */ #define MBX_KILL_BOARD 0x24 #define MBX_CONFIG_FARP 0x25 #define MBX_BEACON 0x2A -#define MBX_ASYNCEVT_ENABLE 0x33 #define MBX_HEARTBEAT 0x31 +#define MBX_WRITE_VPARMS 0x32 +#define MBX_ASYNCEVT_ENABLE 0x33 #define MBX_CONFIG_HBQ 0x7C #define MBX_LOAD_AREA 0x81 diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index ceb185fa3216..db96f7504a14 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -1339,6 +1339,7 @@ lpfc_cleanup(struct lpfc_vport *vport) { struct lpfc_hba *phba = vport->phba; struct lpfc_nodelist *ndlp, *next_ndlp; + int i = 0; if (phba->link_state > LPFC_LINK_DOWN) lpfc_port_link_failure(vport); @@ -1351,17 +1352,20 @@ lpfc_cleanup(struct lpfc_vport *vport) NLP_EVT_DEVICE_RM); } - /* At this point, ALL ndlp's should be gone */ + /* At this point, ALL ndlp's should be gone + * because of the previous NLP_EVT_DEVICE_RM. + * Lets wait for this to happen, if needed. + */ while (!list_empty(&vport->fc_nodes)) { - list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, - nlp_listp) { + if (i++ > 3000) { lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, - "0233 Nodelist x%x not free: %d\n", - ndlp->nlp_DID, - atomic_read(&ndlp->kref.refcount)); - lpfc_drop_node(vport, ndlp); + "0233 Nodelist not empty\n"); + break; } + + /* Wait for any activity on ndlps to settle */ + msleep(10); } return; } @@ -1499,6 +1503,8 @@ lpfc_offline_prep(struct lpfc_hba * phba) for(i = 0; i < LPFC_MAX_VPORTS && vports[i] != NULL; i++) { struct Scsi_Host *shost; + if (vports[i]->load_flag & FC_UNLOADING) + continue; shost = lpfc_shost_from_vport(vports[i]); list_for_each_entry_safe(ndlp, next_ndlp, &vports[i]->fc_nodes, @@ -1771,6 +1777,8 @@ void lpfc_host_attrib_init(struct Scsi_Host *shost) fc_host_supported_speeds(shost) = 0; if (phba->lmt & LMT_10Gb) fc_host_supported_speeds(shost) |= FC_PORTSPEED_10GBIT; + if (phba->lmt & LMT_8Gb) + fc_host_supported_speeds(shost) |= FC_PORTSPEED_8GBIT; if (phba->lmt & LMT_4Gb) fc_host_supported_speeds(shost) |= FC_PORTSPEED_4GBIT; if (phba->lmt & LMT_2Gb) diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index bba1fb6103f6..c654c787c3e6 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -287,6 +287,24 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, pcmd = (struct lpfc_dmabuf *) cmdiocb->context2; lp = (uint32_t *) pcmd->virt; sp = (struct serv_parm *) ((uint8_t *) lp + sizeof (uint32_t)); + if (wwn_to_u64(sp->portName.u.wwn) == 0) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, + "0140 PLOGI Reject: invalid nname\n"); + stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC; + stat.un.b.lsRjtRsnCodeExp = LSEXP_INVALID_PNAME; + lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb, ndlp, + NULL); + return 0; + } + if (wwn_to_u64(sp->nodeName.u.wwn) == 0) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, + "0141 PLOGI Reject: invalid pname\n"); + stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC; + stat.un.b.lsRjtRsnCodeExp = LSEXP_INVALID_NNAME; + lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb, ndlp, + NULL); + return 0; + } if ((lpfc_check_sparm(vport, ndlp, sp, CLASS3) == 0)) { /* Reject this request because invalid parameters */ stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC; @@ -821,6 +839,12 @@ lpfc_cmpl_plogi_plogi_issue(struct lpfc_vport *vport, lp = (uint32_t *) prsp->virt; sp = (struct serv_parm *) ((uint8_t *) lp + sizeof (uint32_t)); + if (wwn_to_u64(sp->portName.u.wwn) == 0 || + wwn_to_u64(sp->nodeName.u.wwn) == 0) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, + "0142 PLOGI RSP: Invalid WWN.\n"); + goto out; + } if (!lpfc_check_sparm(vport, ndlp, sp, CLASS3)) goto out; /* PLOGI chkparm OK */ @@ -906,9 +930,7 @@ out: "0261 Cannot Register NameServer login\n"); } - /* Free this node since the driver cannot login or has the wrong - sparm */ - lpfc_nlp_not_used(ndlp); + ndlp->nlp_flag |= NLP_DEFER_RM; return NLP_STE_FREED_NODE; } @@ -1795,7 +1817,7 @@ lpfc_cmpl_plogi_npr_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, irsp = &rspiocb->iocb; if (irsp->ulpStatus) { - lpfc_nlp_not_used(ndlp); + ndlp->nlp_flag |= NLP_DEFER_RM; return NLP_STE_FREED_NODE; } return ndlp->nlp_state; diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 49f2fdd2ba2b..c3743d6f445b 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -540,6 +540,7 @@ lpfc_sli_hbqbuf_free_all(struct lpfc_hba *phba) list_del(&hbq_buf->dbuf.list); (phba->hbqs[i].hbq_free_buffer)(phba, hbq_buf); } + phba->hbqs[i].buffer_count = 0; } } @@ -608,8 +609,8 @@ lpfc_sli_hbqbuf_fill_hbqs(struct lpfc_hba *phba, uint32_t hbqno, uint32_t count) return 0; } - start = lpfc_hbq_defs[hbqno]->buffer_count; - end = count + lpfc_hbq_defs[hbqno]->buffer_count; + start = phba->hbqs[hbqno].buffer_count; + end = count + start; if (end > lpfc_hbq_defs[hbqno]->entry_count) { end = lpfc_hbq_defs[hbqno]->entry_count; } @@ -621,7 +622,7 @@ lpfc_sli_hbqbuf_fill_hbqs(struct lpfc_hba *phba, uint32_t hbqno, uint32_t count) return 1; hbq_buffer->tag = (i | (hbqno << 16)); if (lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer)) - lpfc_hbq_defs[hbqno]->buffer_count++; + phba->hbqs[hbqno].buffer_count++; else (phba->hbqs[hbqno].hbq_free_buffer)(phba, hbq_buffer); } @@ -661,7 +662,7 @@ lpfc_sli_hbqbuf_find(struct lpfc_hba *phba, uint32_t tag) } lpfc_printf_log(phba, KERN_ERR, LOG_SLI | LOG_VPORT, "1803 Bad hbq tag. Data: x%x x%x\n", - tag, lpfc_hbq_defs[tag >> 16]->buffer_count); + tag, phba->hbqs[tag >> 16].buffer_count); return NULL; } @@ -687,6 +688,7 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand) case MBX_LOAD_SM: case MBX_READ_NV: case MBX_WRITE_NV: + case MBX_WRITE_VPARMS: case MBX_RUN_BIU_DIAG: case MBX_INIT_LINK: case MBX_DOWN_LINK: -- cgit v1.2.3-59-g8ed1b From 76bb24efdc5de8eead0ccc07ec7e3b59a4ca0f15 Mon Sep 17 00:00:00 2001 From: James Smart Date: Sat, 27 Oct 2007 13:38:00 -0400 Subject: [SCSI] lpfc 8.2.3 : Internal loopback fixes Internal loopback fixes: - Use HBQs rather than Q_RING_BUFF - Correct HBQs continuation entries - Update CT handler to SLI3 iocbs Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 7 +++ drivers/scsi/lpfc/lpfc_crtn.h | 5 ++ drivers/scsi/lpfc/lpfc_hw.h | 31 ++++++++--- drivers/scsi/lpfc/lpfc_sli.c | 123 +++++++++++++++++++++++++++++++++++++++--- 4 files changed, 153 insertions(+), 13 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 636a930a5739..46ccdffb46aa 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -68,6 +68,7 @@ struct lpfc_dmabuf { struct list_head list; void *virt; /* virtual address ptr */ dma_addr_t phys; /* mapped address */ + uint32_t buffer_tag; /* used for tagged queue ring */ }; struct lpfc_dma_pool { @@ -582,6 +583,12 @@ struct lpfc_hba { unsigned long last_completion_time; struct timer_list hb_tmofunc; uint8_t hb_outstanding; + /* + * Following bit will be set for all buffer tags which are not + * associated with any HBQ. + */ +#define QUE_BUFTAG_BIT (1<<31) + uint32_t buffer_tag_count; }; static inline struct Scsi_Host * diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index 338b5dd10a92..87bea176ac05 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -211,6 +211,11 @@ int lpfc_sli_ringpostbuf_put(struct lpfc_hba *, struct lpfc_sli_ring *, struct lpfc_dmabuf *lpfc_sli_ringpostbuf_get(struct lpfc_hba *, struct lpfc_sli_ring *, dma_addr_t); + +uint32_t lpfc_sli_get_buffer_tag(struct lpfc_hba *); +struct lpfc_dmabuf * lpfc_sli_ring_taggedbuf_get(struct lpfc_hba *, + struct lpfc_sli_ring *, uint32_t ); + int lpfc_sli_hbq_count(void); int lpfc_sli_hbqbuf_init_hbqs(struct lpfc_hba *, uint32_t); int lpfc_sli_hbqbuf_add_hbqs(struct lpfc_hba *, uint32_t); diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index 8635b9294640..b61e45a1310d 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -1373,6 +1373,7 @@ typedef struct { /* FireFly BIU registers */ #define CMD_FCP_TRECEIVE64_CX 0xA1 #define CMD_FCP_TRSP64_CX 0xA3 +#define CMD_QUE_XRI64_CX 0xB3 #define CMD_IOCB_RCV_SEQ64_CX 0xB5 #define CMD_IOCB_RCV_ELS64_CX 0xB7 #define CMD_IOCB_RCV_CONT64_CX 0xBB @@ -3039,7 +3040,26 @@ struct rcv_sli3 { struct ulp_bde64 bde2; }; +/* Structure used for a single HBQ entry */ +struct lpfc_hbq_entry { + struct ulp_bde64 bde; + uint32_t buffer_tag; +}; +/* IOCB Command template for QUE_XRI64_CX (0xB3) command */ +typedef struct { + struct lpfc_hbq_entry buff; + uint32_t rsvd; + uint32_t rsvd1; +} QUE_XRI64_CX_FIELDS; + +struct que_xri64cx_ext_fields { + uint32_t iotag64_low; + uint32_t iotag64_high; + uint32_t ebde_count; + uint32_t rsvd; + struct lpfc_hbq_entry buff[5]; +}; typedef struct _IOCB { /* IOCB structure */ union { @@ -3064,6 +3084,7 @@ typedef struct _IOCB { /* IOCB structure */ FCPI_FIELDS64 fcpi64; /* FCP 64 bit Initiator template */ FCPT_FIELDS64 fcpt64; /* FCP 64 bit target template */ ASYNCSTAT_FIELDS asyncstat; /* async_status iocb */ + QUE_XRI64_CX_FIELDS quexri64cx; /* que_xri64_cx fields */ uint32_t ulpWord[IOCB_WORD_SZ - 2]; /* generic 6 'words' */ } un; @@ -3121,6 +3142,10 @@ typedef struct _IOCB { /* IOCB structure */ union { struct rcv_sli3 rcvsli3; /* words 8 - 15 */ + + /* words 8-31 used for que_xri_cx iocb */ + struct que_xri64cx_ext_fields que_xri64cx_ext_words; + uint32_t sli3Words[24]; /* 96 extra bytes for SLI-3 */ } unsli3; @@ -3160,12 +3185,6 @@ typedef struct _IOCB { /* IOCB structure */ } IOCB_t; -/* Structure used for a single HBQ entry */ -struct lpfc_hbq_entry { - struct ulp_bde64 bde; - uint32_t buffer_tag; -}; - #define SLI1_SLIM_SIZE (4 * 1024) diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index c3743d6f445b..9bc85d5a02f7 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -931,6 +931,16 @@ lpfc_sli_replace_hbqbuff(struct lpfc_hba *phba, uint32_t tag) return &new_hbq_entry->dbuf; } +static struct lpfc_dmabuf * +lpfc_sli_get_buff(struct lpfc_hba *phba, + struct lpfc_sli_ring *pring, + uint32_t tag) +{ + if (tag & QUE_BUFTAG_BIT) + return lpfc_sli_ring_taggedbuf_get(phba, pring, tag); + else + return lpfc_sli_replace_hbqbuff(phba, tag); +} static int lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, @@ -940,6 +950,7 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, WORD5 * w5p; uint32_t Rctl, Type; uint32_t match, i; + struct lpfc_iocbq *iocbq; match = 0; irsp = &(saveq->iocb); @@ -984,12 +995,69 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) { - if (irsp->ulpBdeCount != 0) - saveq->context2 = lpfc_sli_replace_hbqbuff(phba, + struct lpfc_hbq_entry *hbqe_1, *hbqe_2; + hbqe_1 = (struct lpfc_hbq_entry *) &saveq->iocb.un.ulpWord[0]; + hbqe_2 = (struct lpfc_hbq_entry *) &saveq->iocb. + unsli3.sli3Words[4]; + + if (irsp->ulpBdeCount != 0) { + saveq->context2 = lpfc_sli_get_buff(phba, pring, irsp->un.ulpWord[3]); - if (irsp->ulpBdeCount == 2) - saveq->context3 = lpfc_sli_replace_hbqbuff(phba, + if (!saveq->context2) + lpfc_printf_log(phba, + KERN_ERR, + LOG_SLI, + "0341 Ring %d Cannot find buffer for " + "an unsolicited iocb. tag 0x%x\n", + pring->ringno, + irsp->un.ulpWord[3]); + + } + if (irsp->ulpBdeCount == 2) { + saveq->context3 = lpfc_sli_get_buff(phba, pring, irsp->unsli3.sli3Words[7]); + if (!saveq->context3) + lpfc_printf_log(phba, + KERN_ERR, + LOG_SLI, + "0342 Ring %d Cannot find buffer for an" + " unsolicited iocb. tag 0x%x\n", + pring->ringno, + irsp->unsli3.sli3Words[7]); + } + list_for_each_entry(iocbq, &saveq->list, list) { + hbqe_1 = (struct lpfc_hbq_entry *) &iocbq->iocb. + un.ulpWord[0]; + hbqe_2 = (struct lpfc_hbq_entry *) &iocbq->iocb. + unsli3.sli3Words[4]; + irsp = &(iocbq->iocb); + + if (irsp->ulpBdeCount != 0) { + iocbq->context2 = lpfc_sli_get_buff(phba, pring, + irsp->un.ulpWord[3]); + if (!saveq->context2) + lpfc_printf_log(phba, + KERN_ERR, + LOG_SLI, + "0343 Ring %d Cannot find " + "buffer for an unsolicited iocb" + ". tag 0x%x\n", pring->ringno, + irsp->un.ulpWord[3]); + } + if (irsp->ulpBdeCount == 2) { + iocbq->context3 = lpfc_sli_get_buff(phba, pring, + irsp->unsli3.sli3Words[7]); + if (!saveq->context3) + lpfc_printf_log(phba, + KERN_ERR, + LOG_SLI, + "0344 Ring %d Cannot find " + "buffer for an unsolicited " + "iocb. tag 0x%x\n", + pring->ringno, + irsp->unsli3.sli3Words[7]); + } + } } /* unSolicited Responses */ @@ -2480,7 +2548,7 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba) lpfc_sli_abort_iocb_ring(phba, pring); lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, - "0316 Resetting board due to mailbox timeout\n"); + "0345 Resetting board due to mailbox timeout\n"); /* * lpfc_offline calls lpfc_sli_hba_down which will clean up * on oustanding mailbox commands. @@ -2975,7 +3043,7 @@ lpfc_sli_async_event_handler(struct lpfc_hba * phba, lpfc_printf_log(phba, KERN_ERR, LOG_SLI, - "0327 Ring %d handler: unexpected ASYNC_STATUS" + "0346 Ring %d handler: unexpected ASYNC_STATUS" " evt_code 0x%x\n", pring->ringno, icmd->un.asyncstat.evt_code); @@ -2988,7 +3056,7 @@ lpfc_sli_async_event_handler(struct lpfc_hba * phba, lpfc_printf_log(phba, KERN_WARNING, LOG_TEMP, - "0339 Adapter is very hot, please take " + "0347 Adapter is very hot, please take " "corrective action. temperature : %d Celsius\n", temp); } @@ -3314,6 +3382,47 @@ lpfc_sli_ringpostbuf_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, return 0; } +uint32_t +lpfc_sli_get_buffer_tag(struct lpfc_hba *phba) +{ + spin_lock_irq(&phba->hbalock); + phba->buffer_tag_count++; + /* + * Always set the QUE_BUFTAG_BIT to distiguish between + * a tag assigned by HBQ. + */ + phba->buffer_tag_count |= QUE_BUFTAG_BIT; + spin_unlock_irq(&phba->hbalock); + return phba->buffer_tag_count; +} + +struct lpfc_dmabuf * +lpfc_sli_ring_taggedbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, + uint32_t tag) +{ + struct lpfc_dmabuf *mp, *next_mp; + struct list_head *slp = &pring->postbufq; + + /* Search postbufq, from the begining, looking for a match on tag */ + spin_lock_irq(&phba->hbalock); + list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) { + if (mp->buffer_tag == tag) { + list_del_init(&mp->list); + pring->postbufq_cnt--; + spin_unlock_irq(&phba->hbalock); + return mp; + } + } + + spin_unlock_irq(&phba->hbalock); + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0410 Cannot find virtual addr for buffer tag on " + "ring %d Data x%lx x%p x%p x%x\n", + pring->ringno, (unsigned long) tag, + slp->next, slp->prev, pring->postbufq_cnt); + + return NULL; +} struct lpfc_dmabuf * lpfc_sli_ringpostbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, -- cgit v1.2.3-59-g8ed1b From 7af670510df343db55752a2210dcf4fc09f59fbb Mon Sep 17 00:00:00 2001 From: James Smart Date: Sat, 27 Oct 2007 13:38:11 -0400 Subject: [SCSI] lpfc 8.2.3 : Temperature handling fix Temperature handling fix - return proper error code indicator for applications Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 6 ++++++ drivers/scsi/lpfc/lpfc_attr.c | 12 ++++++++++++ drivers/scsi/lpfc/lpfc_init.c | 12 ++++++++++++ 3 files changed, 30 insertions(+) diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 46ccdffb46aa..1ddfd688fea3 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -386,6 +386,11 @@ struct hbq_s { #define LPFC_ELS_HBQ 0 #define LPFC_EXTRA_HBQ 1 +enum hba_temp_state { + HBA_NORMAL_TEMP, + HBA_OVER_TEMP +}; + struct lpfc_hba { struct lpfc_sli sli; uint32_t sli_rev; /* SLI2 or SLI3 */ @@ -589,6 +594,7 @@ struct lpfc_hba { */ #define QUE_BUFTAG_BIT (1<<31) uint32_t buffer_tag_count; + enum hba_temp_state over_temp_state; }; static inline struct Scsi_Host * diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 4e9e890449a3..e1b041d8f6d5 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -979,6 +979,12 @@ lpfc_soft_wwpn_store(struct class_device *cdev, const char *buf, size_t count) unsigned int i, j, cnt=count; u8 wwpn[8]; + spin_lock_irq(&phba->hbalock); + if (phba->over_temp_state == HBA_OVER_TEMP) { + spin_unlock_irq(&phba->hbalock); + return -EPERM; + } + spin_unlock_irq(&phba->hbalock); /* count may include a LF at end of string */ if (buf[cnt-1] == '\n') cnt--; @@ -1750,6 +1756,12 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr, spin_lock_irq(&phba->hbalock); + if (phba->over_temp_state == HBA_OVER_TEMP) { + sysfs_mbox_idle(phba); + spin_unlock_irq(&phba->hbalock); + return -EPERM; + } + if (off == 0 && phba->sysfs_mbox.state == SMBOX_WRITING && phba->sysfs_mbox.offset >= 2 * sizeof(uint32_t)) { diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index db96f7504a14..0615af41c7b5 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -246,6 +246,15 @@ lpfc_config_port_post(struct lpfc_hba *phba) int i, j; int rc; + spin_lock_irq(&phba->hbalock); + /* + * If the Config port completed correctly the HBA is not + * over heated any more. + */ + if (phba->over_temp_state == HBA_OVER_TEMP) + phba->over_temp_state = HBA_NORMAL_TEMP; + spin_unlock_irq(&phba->hbalock); + pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!pmb) { phba->link_state = LPFC_HBA_ERROR; @@ -703,7 +712,10 @@ lpfc_handle_eratt(struct lpfc_hba *phba) SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX); + spin_lock_irq(&phba->hbalock); psli->sli_flag &= ~LPFC_SLI2_ACTIVE; + phba->over_temp_state = HBA_OVER_TEMP; + spin_unlock_irq(&phba->hbalock); lpfc_offline_prep(phba); lpfc_offline(phba); lpfc_unblock_mgmt_io(phba); -- cgit v1.2.3-59-g8ed1b From 062af9c300cd4c703c78bcc109647a9629afea0d Mon Sep 17 00:00:00 2001 From: James Smart Date: Sat, 27 Oct 2007 13:38:20 -0400 Subject: [SCSI] lpfc 8.2.3 : Change version number to 8.2.3 Change version number to 8.2.3 Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h index 0081f49286bc..487f780a4bc3 100644 --- a/drivers/scsi/lpfc/lpfc_version.h +++ b/drivers/scsi/lpfc/lpfc_version.h @@ -18,7 +18,7 @@ * included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "8.2.2" +#define LPFC_DRIVER_VERSION "8.2.3" #define LPFC_DRIVER_NAME "lpfc" -- cgit v1.2.3-59-g8ed1b From 75a9a4e1476db705dbbcbd2e3a16b265ef8ec3e9 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Wed, 31 Oct 2007 20:59:56 -0500 Subject: [SCSI] add DID_REQUEUE string to scsi_show_result host table I was working on patches which add new transport error values, when I noticed that DID_REQUEUE was not in the hostbyte_table. I do not think there is any way to hit the code path where scsi_show_result is called and where you return DID_REQUEUE, because DID_REQUEUE causes scsi-ml to always requeue the command. However, for completeness and because I want to one day send a patch that tries to add new host bytes values, I am sending this patch. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/constants.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c index 024553f9c247..fac4314cd2ad 100644 --- a/drivers/scsi/constants.c +++ b/drivers/scsi/constants.c @@ -1369,7 +1369,7 @@ EXPORT_SYMBOL(scsi_print_sense); static const char * const hostbyte_table[]={ "DID_OK", "DID_NO_CONNECT", "DID_BUS_BUSY", "DID_TIME_OUT", "DID_BAD_TARGET", "DID_ABORT", "DID_PARITY", "DID_ERROR", "DID_RESET", "DID_BAD_INTR", -"DID_PASSTHROUGH", "DID_SOFT_ERROR", "DID_IMM_RETRY"}; +"DID_PASSTHROUGH", "DID_SOFT_ERROR", "DID_IMM_RETRY", "DID_REQUEUE"}; #define NUM_HOSTBYTE_STRS ARRAY_SIZE(hostbyte_table) static const char * const driverbyte_table[]={ -- cgit v1.2.3-59-g8ed1b From 73d2cb165af80f6a61458d808d80514d2665d7da Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Thu, 1 Nov 2007 18:54:44 +0200 Subject: [SCSI] aha152x: Use scsi_eh API for REQUEST_SENSE invocation - Use new scsi_eh_prep/restor_cmnd() for synchronous REQUEST_SENSE invocation. Signed-off-by: Boaz Harrosh Signed-off-by: James Bottomley --- drivers/scsi/aha152x.c | 38 ++++++++------------------------------ 1 file changed, 8 insertions(+), 30 deletions(-) diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c index ea8c69947644..6ccdc96cc480 100644 --- a/drivers/scsi/aha152x.c +++ b/drivers/scsi/aha152x.c @@ -260,6 +260,7 @@ #include #include #include +#include #include "aha152x.h" static LIST_HEAD(aha152x_host_list); @@ -558,9 +559,7 @@ struct aha152x_hostdata { struct aha152x_scdata { Scsi_Cmnd *next; /* next sc in queue */ struct completion *done;/* semaphore to block on */ - unsigned char aha_orig_cmd_len; - unsigned char aha_orig_cmnd[MAX_COMMAND_SIZE]; - int aha_orig_resid; + struct scsi_eh_save ses; }; /* access macros for hostdata */ @@ -1017,16 +1016,10 @@ static int aha152x_internal_queue(Scsi_Cmnd *SCpnt, struct completion *complete, SCp.buffers_residual : left buffers in list SCp.phase : current state of the command */ - if ((phase & (check_condition|resetting)) || !scsi_sglist(SCpnt)) { - if (phase & check_condition) { - SCpnt->SCp.ptr = SCpnt->sense_buffer; - SCpnt->SCp.this_residual = sizeof(SCpnt->sense_buffer); - scsi_set_resid(SCpnt, sizeof(SCpnt->sense_buffer)); - } else { - SCpnt->SCp.ptr = NULL; - SCpnt->SCp.this_residual = 0; - scsi_set_resid(SCpnt, 0); - } + if ((phase & resetting) || !scsi_sglist(SCpnt)) { + SCpnt->SCp.ptr = NULL; + SCpnt->SCp.this_residual = 0; + scsi_set_resid(SCpnt, 0); SCpnt->SCp.buffer = NULL; SCpnt->SCp.buffers_residual = 0; } else { @@ -1561,10 +1554,7 @@ static void busfree_run(struct Scsi_Host *shpnt) } #endif - /* restore old command */ - memcpy(cmd->cmnd, sc->aha_orig_cmnd, sizeof(cmd->cmnd)); - cmd->cmd_len = sc->aha_orig_cmd_len; - scsi_set_resid(cmd, sc->aha_orig_resid); + scsi_eh_restore_cmnd(cmd, &sc->ses); cmd->SCp.Status = SAM_STAT_CHECK_CONDITION; @@ -1587,22 +1577,10 @@ static void busfree_run(struct Scsi_Host *shpnt) DPRINTK(debug_eh, ERR_LEAD "requesting sense\n", CMDINFO(ptr)); #endif - /* save old command */ sc = SCDATA(ptr); /* It was allocated in aha152x_internal_queue? */ BUG_ON(!sc); - memcpy(sc->aha_orig_cmnd, ptr->cmnd, - sizeof(ptr->cmnd)); - sc->aha_orig_cmd_len = ptr->cmd_len; - sc->aha_orig_resid = scsi_get_resid(ptr); - - ptr->cmnd[0] = REQUEST_SENSE; - ptr->cmnd[1] = 0; - ptr->cmnd[2] = 0; - ptr->cmnd[3] = 0; - ptr->cmnd[4] = sizeof(ptr->sense_buffer); - ptr->cmnd[5] = 0; - ptr->cmd_len = 6; + scsi_eh_prep_cmnd(ptr, &sc->ses, NULL, 0, ~0); DO_UNLOCK(flags); aha152x_internal_queue(ptr, NULL, check_condition, ptr->scsi_done); -- cgit v1.2.3-59-g8ed1b From 040cd23242413a8bd2a49b6de1ee320ce392a46d Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Thu, 16 Aug 2007 13:01:05 +0300 Subject: [SCSI] nsp_cs: convert to data accessors and !use_sg cleanup - use scsi data accessors - cleanup !use_sg code paths - TODO: use next_sg() for Jens's sglist branch. Look for 2 places with "SCp.buffer++" Signed-off-by: Boaz Harrosh Signed-off-by: James Bottomley --- drivers/scsi/pcmcia/nsp_cs.c | 54 ++++++++++++++++++++++++++++---------------- 1 file changed, 34 insertions(+), 20 deletions(-) diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index a45d89b14147..5082ca3c6876 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -135,6 +135,11 @@ static nsp_hw_data nsp_data_base; /* attach <-> detect glue */ #define NSP_DEBUG_BUF_LEN 150 +static inline void nsp_inc_resid(struct scsi_cmnd *SCpnt, int residInc) +{ + scsi_set_resid(SCpnt, scsi_get_resid(SCpnt) + residInc); +} + static void nsp_cs_message(const char *func, int line, char *type, char *fmt, ...) { va_list args; @@ -192,8 +197,10 @@ static int nsp_queuecommand(struct scsi_cmnd *SCpnt, #endif nsp_hw_data *data = (nsp_hw_data *)SCpnt->device->host->hostdata; - nsp_dbg(NSP_DEBUG_QUEUECOMMAND, "SCpnt=0x%p target=%d lun=%d buff=0x%p bufflen=%d use_sg=%d", - SCpnt, target, SCpnt->device->lun, SCpnt->request_buffer, SCpnt->request_bufflen, SCpnt->use_sg); + nsp_dbg(NSP_DEBUG_QUEUECOMMAND, + "SCpnt=0x%p target=%d lun=%d sglist=0x%p bufflen=%d sg_count=%d", + SCpnt, target, SCpnt->device->lun, scsi_sglist(SCpnt), + scsi_bufflen(SCpnt), scsi_sg_count(SCpnt)); //nsp_dbg(NSP_DEBUG_QUEUECOMMAND, "before CurrentSC=0x%p", data->CurrentSC); SCpnt->scsi_done = done; @@ -225,7 +232,7 @@ static int nsp_queuecommand(struct scsi_cmnd *SCpnt, SCpnt->SCp.have_data_in = IO_UNKNOWN; SCpnt->SCp.sent_command = 0; SCpnt->SCp.phase = PH_UNDETERMINED; - SCpnt->resid = SCpnt->request_bufflen; + scsi_set_resid(SCpnt, scsi_bufflen(SCpnt)); /* setup scratch area SCp.ptr : buffer pointer @@ -233,14 +240,14 @@ static int nsp_queuecommand(struct scsi_cmnd *SCpnt, SCp.buffer : next buffer SCp.buffers_residual : left buffers in list SCp.phase : current state of the command */ - if (SCpnt->use_sg) { - SCpnt->SCp.buffer = (struct scatterlist *) SCpnt->request_buffer; + if (scsi_bufflen(SCpnt)) { + SCpnt->SCp.buffer = scsi_sglist(SCpnt); SCpnt->SCp.ptr = BUFFER_ADDR; SCpnt->SCp.this_residual = SCpnt->SCp.buffer->length; - SCpnt->SCp.buffers_residual = SCpnt->use_sg - 1; + SCpnt->SCp.buffers_residual = scsi_sg_count(SCpnt) - 1; } else { - SCpnt->SCp.ptr = (char *) SCpnt->request_buffer; - SCpnt->SCp.this_residual = SCpnt->request_bufflen; + SCpnt->SCp.ptr = NULL; + SCpnt->SCp.this_residual = 0; SCpnt->SCp.buffer = NULL; SCpnt->SCp.buffers_residual = 0; } @@ -721,7 +728,9 @@ static void nsp_pio_read(struct scsi_cmnd *SCpnt) ocount = data->FifoCount; nsp_dbg(NSP_DEBUG_DATA_IO, "in SCpnt=0x%p resid=%d ocount=%d ptr=0x%p this_residual=%d buffers=0x%p nbuf=%d", - SCpnt, SCpnt->resid, ocount, SCpnt->SCp.ptr, SCpnt->SCp.this_residual, SCpnt->SCp.buffer, SCpnt->SCp.buffers_residual); + SCpnt, scsi_get_resid(SCpnt), ocount, SCpnt->SCp.ptr, + SCpnt->SCp.this_residual, SCpnt->SCp.buffer, + SCpnt->SCp.buffers_residual); time_out = 1000; @@ -771,7 +780,7 @@ static void nsp_pio_read(struct scsi_cmnd *SCpnt) return; } - SCpnt->resid -= res; + nsp_inc_resid(SCpnt, -res); SCpnt->SCp.ptr += res; SCpnt->SCp.this_residual -= res; ocount += res; @@ -795,10 +804,12 @@ static void nsp_pio_read(struct scsi_cmnd *SCpnt) if (time_out == 0) { nsp_msg(KERN_DEBUG, "pio read timeout resid=%d this_residual=%d buffers_residual=%d", - SCpnt->resid, SCpnt->SCp.this_residual, SCpnt->SCp.buffers_residual); + scsi_get_resid(SCpnt), SCpnt->SCp.this_residual, + SCpnt->SCp.buffers_residual); } nsp_dbg(NSP_DEBUG_DATA_IO, "read ocount=0x%x", ocount); - nsp_dbg(NSP_DEBUG_DATA_IO, "r cmd=%d resid=0x%x\n", data->CmdId, SCpnt->resid); + nsp_dbg(NSP_DEBUG_DATA_IO, "r cmd=%d resid=0x%x\n", data->CmdId, + scsi_get_resid(SCpnt)); } /* @@ -816,7 +827,9 @@ static void nsp_pio_write(struct scsi_cmnd *SCpnt) ocount = data->FifoCount; nsp_dbg(NSP_DEBUG_DATA_IO, "in fifocount=%d ptr=0x%p this_residual=%d buffers=0x%p nbuf=%d resid=0x%x", - data->FifoCount, SCpnt->SCp.ptr, SCpnt->SCp.this_residual, SCpnt->SCp.buffer, SCpnt->SCp.buffers_residual, SCpnt->resid); + data->FifoCount, SCpnt->SCp.ptr, SCpnt->SCp.this_residual, + SCpnt->SCp.buffer, SCpnt->SCp.buffers_residual, + scsi_get_resid(SCpnt)); time_out = 1000; @@ -830,7 +843,7 @@ static void nsp_pio_write(struct scsi_cmnd *SCpnt) nsp_dbg(NSP_DEBUG_DATA_IO, "phase changed stat=0x%x, res=%d\n", stat, res); /* Put back pointer */ - SCpnt->resid += res; + nsp_inc_resid(SCpnt, res); SCpnt->SCp.ptr -= res; SCpnt->SCp.this_residual += res; ocount -= res; @@ -866,7 +879,7 @@ static void nsp_pio_write(struct scsi_cmnd *SCpnt) break; } - SCpnt->resid -= res; + nsp_inc_resid(SCpnt, -res); SCpnt->SCp.ptr += res; SCpnt->SCp.this_residual -= res; ocount += res; @@ -886,10 +899,12 @@ static void nsp_pio_write(struct scsi_cmnd *SCpnt) data->FifoCount = ocount; if (time_out == 0) { - nsp_msg(KERN_DEBUG, "pio write timeout resid=0x%x", SCpnt->resid); + nsp_msg(KERN_DEBUG, "pio write timeout resid=0x%x", + scsi_get_resid(SCpnt)); } nsp_dbg(NSP_DEBUG_DATA_IO, "write ocount=0x%x", ocount); - nsp_dbg(NSP_DEBUG_DATA_IO, "w cmd=%d resid=0x%x\n", data->CmdId, SCpnt->resid); + nsp_dbg(NSP_DEBUG_DATA_IO, "w cmd=%d resid=0x%x\n", data->CmdId, + scsi_get_resid(SCpnt)); } #undef RFIFO_CRIT #undef WFIFO_CRIT @@ -911,9 +926,8 @@ static int nsp_nexus(struct scsi_cmnd *SCpnt) nsp_index_write(base, SYNCREG, sync->SyncRegister); nsp_index_write(base, ACKWIDTH, sync->AckWidth); - if (SCpnt->use_sg == 0 || - SCpnt->resid % 4 != 0 || - SCpnt->resid <= PAGE_SIZE ) { + if (scsi_get_resid(SCpnt) % 4 != 0 || + scsi_get_resid(SCpnt) <= PAGE_SIZE ) { data->TransferMode = MODE_IO8; } else if (nsp_burst_mode == BURST_MEM32) { data->TransferMode = MODE_MEM32; -- cgit v1.2.3-59-g8ed1b From 7410d849a47047f1299a505dd5fde68d0ed45eaa Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 9 Sep 2007 21:10:27 +0300 Subject: [SCSI] eata_pio: convert to accessors and !use_sg cleanup - convert to accessors and !use_sg cleanup Signed-off-by: Boaz Harrosh Signed-off-by: James Bottomley --- drivers/scsi/eata_pio.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/eata_pio.c b/drivers/scsi/eata_pio.c index 982c5092be11..9579507f555b 100644 --- a/drivers/scsi/eata_pio.c +++ b/drivers/scsi/eata_pio.c @@ -385,7 +385,7 @@ static int eata_pio_queue(struct scsi_cmnd *cmd, cp->DataIn = 0; /* Input mode */ cp->Interpret = (cmd->device->id == hd->hostid); - cp->cp_datalen = cpu_to_be32(cmd->request_bufflen); + cp->cp_datalen = cpu_to_be32(scsi_bufflen(cmd)); cp->Auto_Req_Sen = 0; cp->cp_reqDMA = 0; cp->reqlen = 0; @@ -402,14 +402,14 @@ static int eata_pio_queue(struct scsi_cmnd *cmd, cp->cmd = cmd; cmd->host_scribble = (char *) &hd->ccb[y]; - if (cmd->use_sg == 0) { + if (!scsi_bufflen(cmd)) { cmd->SCp.buffers_residual = 1; - cmd->SCp.ptr = cmd->request_buffer; - cmd->SCp.this_residual = cmd->request_bufflen; + cmd->SCp.ptr = NULL; + cmd->SCp.this_residual = 0; cmd->SCp.buffer = NULL; } else { - cmd->SCp.buffer = cmd->request_buffer; - cmd->SCp.buffers_residual = cmd->use_sg; + cmd->SCp.buffer = scsi_sglist(cmd); + cmd->SCp.buffers_residual = scsi_sg_count(cmd); cmd->SCp.ptr = sg_virt(cmd->SCp.buffer); cmd->SCp.this_residual = cmd->SCp.buffer->length; } -- cgit v1.2.3-59-g8ed1b From f2c1afa5ebc6cd3171539e686b48a2afe24694c0 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 9 Sep 2007 20:57:05 +0300 Subject: [SCSI] a2091: convert to accessors and !use_sg cleanup - convert to accessors and !use_sg cleanup Signed-off-by: Boaz Harrosh Signed-off-by: James Bottomley --- drivers/scsi/a2091.c | 36 +++++------------------------------- 1 file changed, 5 insertions(+), 31 deletions(-) diff --git a/drivers/scsi/a2091.c b/drivers/scsi/a2091.c index b7c5385e2efe..23f27c9c9895 100644 --- a/drivers/scsi/a2091.c +++ b/drivers/scsi/a2091.c @@ -73,18 +73,9 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in) } if (!dir_in) { - /* copy to bounce buffer for a write */ - if (cmd->use_sg) -#if 0 - panic ("scsi%ddma: incomplete s/g support", - instance->host_no); -#else + /* copy to bounce buffer for a write */ memcpy (HDATA(instance)->dma_bounce_buffer, cmd->SCp.ptr, cmd->SCp.this_residual); -#endif - else - memcpy (HDATA(instance)->dma_bounce_buffer, - cmd->request_buffer, cmd->request_bufflen); } } @@ -144,30 +135,13 @@ static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, /* copy from a bounce buffer, if necessary */ if (status && HDATA(instance)->dma_bounce_buffer) { - if (SCpnt && SCpnt->use_sg) { -#if 0 - panic ("scsi%d: incomplete s/g support", - instance->host_no); -#else - if( HDATA(instance)->dma_dir ) + if( HDATA(instance)->dma_dir ) memcpy (SCpnt->SCp.ptr, HDATA(instance)->dma_bounce_buffer, SCpnt->SCp.this_residual); - kfree (HDATA(instance)->dma_bounce_buffer); - HDATA(instance)->dma_bounce_buffer = NULL; - HDATA(instance)->dma_bounce_len = 0; - -#endif - } else { - if (HDATA(instance)->dma_dir && SCpnt) - memcpy (SCpnt->request_buffer, - HDATA(instance)->dma_bounce_buffer, - SCpnt->request_bufflen); - - kfree (HDATA(instance)->dma_bounce_buffer); - HDATA(instance)->dma_bounce_buffer = NULL; - HDATA(instance)->dma_bounce_len = 0; - } + kfree (HDATA(instance)->dma_bounce_buffer); + HDATA(instance)->dma_bounce_buffer = NULL; + HDATA(instance)->dma_bounce_len = 0; } } -- cgit v1.2.3-59-g8ed1b From cc0455fac06f0539277d7b724dbc513284629069 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 9 Sep 2007 20:59:32 +0300 Subject: [SCSI] a3000: convert to accessors and !use_sg cleanup - convert to accessors and !use_sg cleanup Signed-off-by: Boaz Harrosh Signed-off-by: James Bottomley --- drivers/scsi/a3000.c | 15 +++------------ 1 file changed, 3 insertions(+), 12 deletions(-) diff --git a/drivers/scsi/a3000.c b/drivers/scsi/a3000.c index 796f1c4d772e..d7255c8bf281 100644 --- a/drivers/scsi/a3000.c +++ b/drivers/scsi/a3000.c @@ -70,12 +70,8 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in) if (!dir_in) { /* copy to bounce buffer for a write */ - if (cmd->use_sg) { - memcpy (HDATA(a3000_host)->dma_bounce_buffer, - cmd->SCp.ptr, cmd->SCp.this_residual); - } else - memcpy (HDATA(a3000_host)->dma_bounce_buffer, - cmd->request_buffer, cmd->request_bufflen); + memcpy (HDATA(a3000_host)->dma_bounce_buffer, + cmd->SCp.ptr, cmd->SCp.this_residual); } addr = virt_to_bus(HDATA(a3000_host)->dma_bounce_buffer); @@ -146,7 +142,7 @@ static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, /* copy from a bounce buffer, if necessary */ if (status && HDATA(instance)->dma_bounce_buffer) { - if (SCpnt && SCpnt->use_sg) { + if (SCpnt) { if (HDATA(instance)->dma_dir && SCpnt) memcpy (SCpnt->SCp.ptr, HDATA(instance)->dma_bounce_buffer, @@ -155,11 +151,6 @@ static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, HDATA(instance)->dma_bounce_buffer = NULL; HDATA(instance)->dma_bounce_len = 0; } else { - if (HDATA(instance)->dma_dir && SCpnt) - memcpy (SCpnt->request_buffer, - HDATA(instance)->dma_bounce_buffer, - SCpnt->request_bufflen); - kfree (HDATA(instance)->dma_bounce_buffer); HDATA(instance)->dma_bounce_buffer = NULL; HDATA(instance)->dma_bounce_len = 0; -- cgit v1.2.3-59-g8ed1b From fc3fdfcc8bb0e069a2d172e745664fa2c1f1b0ca Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 9 Sep 2007 21:02:45 +0300 Subject: [SCSI] aha1542: convert to accessors and !use_sg cleanup - convert to accessors and !use_sg cleanup Signed-off-by: Boaz Harrosh Signed-off-by: James Bottomley --- drivers/scsi/aha1542.c | 45 ++++++++++----------------------------------- 1 file changed, 10 insertions(+), 35 deletions(-) diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c index bbcc2c52d79f..5b69a88d0e4c 100644 --- a/drivers/scsi/aha1542.c +++ b/drivers/scsi/aha1542.c @@ -51,15 +51,6 @@ #define SCSI_BUF_PA(address) isa_virt_to_bus(address) #define SCSI_SG_PA(sgent) (isa_page_to_bus(sg_page((sgent))) + (sgent)->offset) -static void BAD_DMA(void *address, unsigned int length) -{ - printk(KERN_CRIT "buf vaddress %p paddress 0x%lx length %d\n", - address, - SCSI_BUF_PA(address), - length); - panic("Buffer at physical address > 16Mb used for aha1542"); -} - static void BAD_SG_DMA(Scsi_Cmnd * SCpnt, struct scatterlist *sgp, int nseg, @@ -597,8 +588,7 @@ static int aha1542_queuecommand(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *)) unchar target = SCpnt->device->id; unchar lun = SCpnt->device->lun; unsigned long flags; - void *buff = SCpnt->request_buffer; - int bufflen = SCpnt->request_bufflen; + int bufflen = scsi_bufflen(SCpnt); int mbo; struct mailbox *mb; struct ccb *ccb; @@ -689,42 +679,29 @@ static int aha1542_queuecommand(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *)) memcpy(ccb[mbo].cdb, cmd, ccb[mbo].cdblen); - if (SCpnt->use_sg) { + if (bufflen) { struct scatterlist *sg; struct chain *cptr; #ifdef DEBUG unsigned char *ptr; #endif - int i; + int i, sg_count = scsi_sg_count(SCpnt); ccb[mbo].op = 2; /* SCSI Initiator Command w/scatter-gather */ - SCpnt->host_scribble = kmalloc(512, GFP_KERNEL | GFP_DMA); + SCpnt->host_scribble = kmalloc(sizeof(*cptr)*sg_count, + GFP_KERNEL | GFP_DMA); cptr = (struct chain *) SCpnt->host_scribble; if (cptr == NULL) { /* free the claimed mailbox slot */ HOSTDATA(SCpnt->device->host)->SCint[mbo] = NULL; return SCSI_MLQUEUE_HOST_BUSY; } - scsi_for_each_sg(SCpnt, sg, SCpnt->use_sg, i) { - if (sg->length == 0 || SCpnt->use_sg > 16 || - (((int) sg->offset) & 1) || (sg->length & 1)) { - unsigned char *ptr; - printk(KERN_CRIT "Bad segment list supplied to aha1542.c (%d, %d)\n", SCpnt->use_sg, i); - scsi_for_each_sg(SCpnt, sg, SCpnt->use_sg, i) { - printk(KERN_CRIT "%d: %p %d\n", i, - sg_virt(sg), sg->length); - }; - printk(KERN_CRIT "cptr %x: ", (unsigned int) cptr); - ptr = (unsigned char *) &cptr[i]; - for (i = 0; i < 18; i++) - printk("%02x ", ptr[i]); - panic("Foooooooood fight!"); - }; + scsi_for_each_sg(SCpnt, sg, sg_count, i) { any2scsi(cptr[i].dataptr, SCSI_SG_PA(sg)); if (SCSI_SG_PA(sg) + sg->length - 1 > ISA_DMA_THRESHOLD) - BAD_SG_DMA(SCpnt, sg, SCpnt->use_sg, i); + BAD_SG_DMA(SCpnt, scsi_sglist(SCpnt), sg_count, i); any2scsi(cptr[i].datalen, sg->length); }; - any2scsi(ccb[mbo].datalen, SCpnt->use_sg * sizeof(struct chain)); + any2scsi(ccb[mbo].datalen, sg_count * sizeof(struct chain)); any2scsi(ccb[mbo].dataptr, SCSI_BUF_PA(cptr)); #ifdef DEBUG printk("cptr %x: ", cptr); @@ -735,10 +712,8 @@ static int aha1542_queuecommand(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *)) } else { ccb[mbo].op = 0; /* SCSI Initiator Command */ SCpnt->host_scribble = NULL; - any2scsi(ccb[mbo].datalen, bufflen); - if (buff && SCSI_BUF_PA(buff + bufflen - 1) > ISA_DMA_THRESHOLD) - BAD_DMA(buff, bufflen); - any2scsi(ccb[mbo].dataptr, SCSI_BUF_PA(buff)); + any2scsi(ccb[mbo].datalen, 0); + any2scsi(ccb[mbo].dataptr, 0); }; ccb[mbo].idlun = (target & 7) << 5 | direction | (lun & 7); /*SCSI Target Id */ ccb[mbo].rsalen = 16; -- cgit v1.2.3-59-g8ed1b From 8e31f1f4d94c8e7e09efab0166cb2ef2ceeec2ce Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 9 Sep 2007 21:12:24 +0300 Subject: [SCSI] fd_mcs: convert to accessors and !use_sg cleanup - convert to accessors and !use_sg cleanup - Not ready for sg-chaining Signed-off-by: Boaz Harrosh Signed-off-by: James Bottomley --- drivers/scsi/fd_mcs.c | 36 +++++++++++------------------------- 1 file changed, 11 insertions(+), 25 deletions(-) diff --git a/drivers/scsi/fd_mcs.c b/drivers/scsi/fd_mcs.c index 8335b608e571..85bd54c77b50 100644 --- a/drivers/scsi/fd_mcs.c +++ b/drivers/scsi/fd_mcs.c @@ -1017,24 +1017,6 @@ static irqreturn_t fd_mcs_intr(int irq, void *dev_id) printk(" ** IN DONE %d ** ", current_SC->SCp.have_data_in); #endif -#if ERRORS_ONLY - if (current_SC->cmnd[0] == REQUEST_SENSE && !current_SC->SCp.Status) { - if ((unsigned char) (*((char *) current_SC->request_buffer + 2)) & 0x0f) { - unsigned char key; - unsigned char code; - unsigned char qualifier; - - key = (unsigned char) (*((char *) current_SC->request_buffer + 2)) & 0x0f; - code = (unsigned char) (*((char *) current_SC->request_buffer + 12)); - qualifier = (unsigned char) (*((char *) current_SC->request_buffer + 13)); - - if (key != UNIT_ATTENTION && !(key == NOT_READY && code == 0x04 && (!qualifier || qualifier == 0x02 || qualifier == 0x01)) - && !(key == ILLEGAL_REQUEST && (code == 0x25 || code == 0x24 || !code))) - - printk("fd_mcs: REQUEST SENSE " "Key = %x, Code = %x, Qualifier = %x\n", key, code, qualifier); - } - } -#endif #if EVERY_ACCESS printk("BEFORE MY_DONE. . ."); #endif @@ -1097,7 +1079,9 @@ static int fd_mcs_queue(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *)) panic("fd_mcs: fd_mcs_queue() NOT REENTRANT!\n"); } #if EVERY_ACCESS - printk("queue: target = %d cmnd = 0x%02x pieces = %d size = %u\n", SCpnt->target, *(unsigned char *) SCpnt->cmnd, SCpnt->use_sg, SCpnt->request_bufflen); + printk("queue: target = %d cmnd = 0x%02x pieces = %d size = %u\n", + SCpnt->target, *(unsigned char *) SCpnt->cmnd, + scsi_sg_count(SCpnt), scsi_bufflen(SCpnt)); #endif fd_mcs_make_bus_idle(shpnt); @@ -1107,14 +1091,14 @@ static int fd_mcs_queue(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *)) /* Initialize static data */ - if (current_SC->use_sg) { - current_SC->SCp.buffer = (struct scatterlist *) current_SC->request_buffer; + if (scsi_bufflen(current_SC)) { + current_SC->SCp.buffer = scsi_sglist(current_SC); current_SC->SCp.ptr = sg_virt(current_SC->SCp.buffer); current_SC->SCp.this_residual = current_SC->SCp.buffer->length; - current_SC->SCp.buffers_residual = current_SC->use_sg - 1; + current_SC->SCp.buffers_residual = scsi_sg_count(current_SC) - 1; } else { - current_SC->SCp.ptr = (char *) current_SC->request_buffer; - current_SC->SCp.this_residual = current_SC->request_bufflen; + current_SC->SCp.ptr = NULL; + current_SC->SCp.this_residual = 0; current_SC->SCp.buffer = NULL; current_SC->SCp.buffers_residual = 0; } @@ -1166,7 +1150,9 @@ static void fd_mcs_print_info(Scsi_Cmnd * SCpnt) break; } - printk("(%d), target = %d cmnd = 0x%02x pieces = %d size = %u\n", SCpnt->SCp.phase, SCpnt->device->id, *(unsigned char *) SCpnt->cmnd, SCpnt->use_sg, SCpnt->request_bufflen); + printk("(%d), target = %d cmnd = 0x%02x pieces = %d size = %u\n", + SCpnt->SCp.phase, SCpnt->device->id, *(unsigned char *) SCpnt->cmnd, + scsi_sg_count(SCpnt), scsi_bufflen(SCpnt)); printk("sent_command = %d, have_data_in = %d, timeout = %d\n", SCpnt->SCp.sent_command, SCpnt->SCp.have_data_in, SCpnt->timeout); #if DEBUG_RACE printk("in_interrupt_flag = %d\n", in_interrupt_flag); -- cgit v1.2.3-59-g8ed1b From ee0ae927937ac8a30350cca1a7a75efafb13976e Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 9 Sep 2007 21:25:11 +0300 Subject: [SCSI] wd33c93: convert to accessors and !use_sg cleanup - convert to accessors and !use_sg cleanup Signed-off-by: Boaz Harrosh Signed-off-by: James Bottomley --- drivers/scsi/wd33c93.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/wd33c93.c b/drivers/scsi/wd33c93.c index fdbb92d1f722..f286c37da7e0 100644 --- a/drivers/scsi/wd33c93.c +++ b/drivers/scsi/wd33c93.c @@ -407,16 +407,16 @@ wd33c93_queuecommand(struct scsi_cmnd *cmd, * - SCp.phase records this command's SRCID_ER bit setting */ - if (cmd->use_sg) { - cmd->SCp.buffer = (struct scatterlist *) cmd->request_buffer; - cmd->SCp.buffers_residual = cmd->use_sg - 1; + if (scsi_bufflen(cmd)) { + cmd->SCp.buffer = scsi_sglist(cmd); + cmd->SCp.buffers_residual = scsi_sg_count(cmd) - 1; cmd->SCp.ptr = sg_virt(cmd->SCp.buffer); cmd->SCp.this_residual = cmd->SCp.buffer->length; } else { cmd->SCp.buffer = NULL; cmd->SCp.buffers_residual = 0; - cmd->SCp.ptr = (char *) cmd->request_buffer; - cmd->SCp.this_residual = cmd->request_bufflen; + cmd->SCp.ptr = NULL; + cmd->SCp.this_residual = 0; } /* WD docs state that at the conclusion of a "LEVEL2" command, the -- cgit v1.2.3-59-g8ed1b From dfb104ff5d8215e09892aad3cd094ad6597b1cfe Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 9 Sep 2007 21:21:35 +0300 Subject: [SCSI] qlogicpti: convert to accessors and !use_sg cleanup - convert to accessors and !use_sg cleanup Signed-off-by: Boaz Harrosh Signed-off-by: James Bottomley --- drivers/scsi/qlogicpti.c | 29 +++++++---------------------- 1 file changed, 7 insertions(+), 22 deletions(-) diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c index 7a2e7986b038..5bc883182b97 100644 --- a/drivers/scsi/qlogicpti.c +++ b/drivers/scsi/qlogicpti.c @@ -871,11 +871,12 @@ static inline int load_cmd(struct scsi_cmnd *Cmnd, struct Command_Entry *cmd, struct scatterlist *sg, *s; int i, n; - if (Cmnd->use_sg) { + if (scsi_bufflen(Cmnd)) { int sg_count; - sg = (struct scatterlist *) Cmnd->request_buffer; - sg_count = sbus_map_sg(qpti->sdev, sg, Cmnd->use_sg, Cmnd->sc_data_direction); + sg = scsi_sglist(Cmnd); + sg_count = sbus_map_sg(qpti->sdev, sg, scsi_sg_count(Cmnd), + Cmnd->sc_data_direction); ds = cmd->dataseg; cmd->segment_cnt = sg_count; @@ -914,16 +915,6 @@ static inline int load_cmd(struct scsi_cmnd *Cmnd, struct Command_Entry *cmd, } sg_count -= n; } - } else if (Cmnd->request_bufflen) { - Cmnd->SCp.ptr = (char *)(unsigned long) - sbus_map_single(qpti->sdev, - Cmnd->request_buffer, - Cmnd->request_bufflen, - Cmnd->sc_data_direction); - - cmd->dataseg[0].d_base = (u32) ((unsigned long)Cmnd->SCp.ptr); - cmd->dataseg[0].d_count = Cmnd->request_bufflen; - cmd->segment_cnt = 1; } else { cmd->dataseg[0].d_base = 0; cmd->dataseg[0].d_count = 0; @@ -1159,17 +1150,11 @@ static struct scsi_cmnd *qlogicpti_intr_handler(struct qlogicpti *qpti) else Cmnd->result = DID_ERROR << 16; - if (Cmnd->use_sg) { + if (scsi_bufflen(Cmnd)) sbus_unmap_sg(qpti->sdev, - (struct scatterlist *)Cmnd->request_buffer, - Cmnd->use_sg, + scsi_sglist(Cmnd), scsi_sg_count(Cmnd), Cmnd->sc_data_direction); - } else if (Cmnd->request_bufflen) { - sbus_unmap_single(qpti->sdev, - (__u32)((unsigned long)Cmnd->SCp.ptr), - Cmnd->request_bufflen, - Cmnd->sc_data_direction); - } + qpti->cmd_count[Cmnd->device->id]--; sbus_writew(out_ptr, qpti->qregs + MBOX5); Cmnd->host_scribble = (unsigned char *) done_queue; -- cgit v1.2.3-59-g8ed1b From 53d2a885032411b471b393d065c7b4693fbaafb4 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 9 Sep 2007 21:14:41 +0300 Subject: [SCSI] in2000: convert to accessors and !use_sg cleanup - convert to accessors and !use_sg cleanup Signed-off-by: Boaz Harrosh Signed-off-by: James Bottomley --- drivers/scsi/in2000.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/in2000.c b/drivers/scsi/in2000.c index c8b452f2878c..8053b1e86ccb 100644 --- a/drivers/scsi/in2000.c +++ b/drivers/scsi/in2000.c @@ -369,16 +369,16 @@ static int in2000_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *)) * - SCp.phase records this command's SRCID_ER bit setting */ - if (cmd->use_sg) { - cmd->SCp.buffer = (struct scatterlist *) cmd->request_buffer; - cmd->SCp.buffers_residual = cmd->use_sg - 1; + if (scsi_bufflen(cmd)) { + cmd->SCp.buffer = scsi_sglist(cmd); + cmd->SCp.buffers_residual = scsi_sg_count(cmd) - 1; cmd->SCp.ptr = sg_virt(cmd->SCp.buffer); cmd->SCp.this_residual = cmd->SCp.buffer->length; } else { cmd->SCp.buffer = NULL; cmd->SCp.buffers_residual = 0; - cmd->SCp.ptr = (char *) cmd->request_buffer; - cmd->SCp.this_residual = cmd->request_bufflen; + cmd->SCp.ptr = NULL; + cmd->SCp.this_residual = 0; } cmd->SCp.have_data_in = 0; -- cgit v1.2.3-59-g8ed1b From 864a4675b239dcc3ae5b8adce15a370639b5ccab Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Thu, 12 Jul 2007 19:49:15 +0300 Subject: [SCSI] psi240i: remove driver The psi240i driver is still written for cmnd->request_buffer as a char pointer to actual data. There was never any attempt to use the scatterlist option. - remove all source files (3) from drivers/scsi - Remove from Makefile and Kconfig Signed-off-by: Boaz Harrosh Signed-off-by: James Bottomley --- drivers/scsi/Kconfig | 11 - drivers/scsi/Makefile | 1 - drivers/scsi/psi240i.c | 689 ------------------------------------------------ drivers/scsi/psi240i.h | 315 ---------------------- drivers/scsi/psi_chip.h | 195 -------------- 5 files changed, 1211 deletions(-) delete mode 100644 drivers/scsi/psi240i.c delete mode 100644 drivers/scsi/psi240i.h delete mode 100644 drivers/scsi/psi_chip.h diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index a6676be87843..ad44557fe204 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1288,17 +1288,6 @@ config SCSI_PAS16 To compile this driver as a module, choose M here: the module will be called pas16. -config SCSI_PSI240I - tristate "PSI240i support" - depends on ISA && SCSI - help - This is support for the PSI240i EIDE interface card which acts as a - SCSI host adapter. Please read the SCSI-HOWTO, available from - . - - To compile this driver as a module, choose M here: the - module will be called psi240i. - config SCSI_QLOGIC_FAS tristate "Qlogic FAS SCSI support" depends on ISA && SCSI diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 2e6129f13d38..2cd739c0ac33 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -59,7 +59,6 @@ obj-$(CONFIG_MVME16x_SCSI) += 53c700.o mvme16x_scsi.o obj-$(CONFIG_BVME6000_SCSI) += 53c700.o bvme6000_scsi.o obj-$(CONFIG_SCSI_SIM710) += 53c700.o sim710.o obj-$(CONFIG_SCSI_ADVANSYS) += advansys.o -obj-$(CONFIG_SCSI_PSI240I) += psi240i.o obj-$(CONFIG_SCSI_BUSLOGIC) += BusLogic.o obj-$(CONFIG_SCSI_DPT_I2O) += dpt_i2o.o obj-$(CONFIG_SCSI_U14_34F) += u14-34f.o diff --git a/drivers/scsi/psi240i.c b/drivers/scsi/psi240i.c deleted file mode 100644 index 899e89d6fe67..000000000000 --- a/drivers/scsi/psi240i.c +++ /dev/null @@ -1,689 +0,0 @@ -/*+M************************************************************************* - * Perceptive Solutions, Inc. PSI-240I device driver proc support for Linux. - * - * Copyright (c) 1997 Perceptive Solutions, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * File Name: psi240i.c - * - * Description: SCSI driver for the PSI240I EIDE interface card. - * - *-M*************************************************************************/ - -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include "scsi.h" -#include - -#include "psi240i.h" -#include "psi_chip.h" - -//#define DEBUG 1 - -#ifdef DEBUG -#define DEB(x) x -#else -#define DEB(x) -#endif - -#define MAXBOARDS 6 /* Increase this and the sizes of the arrays below, if you need more. */ - -#define PORT_DATA 0 -#define PORT_ERROR 1 -#define PORT_SECTOR_COUNT 2 -#define PORT_LBA_0 3 -#define PORT_LBA_8 4 -#define PORT_LBA_16 5 -#define PORT_LBA_24 6 -#define PORT_STAT_CMD 7 -#define PORT_SEL_FAIL 8 -#define PORT_IRQ_STATUS 9 -#define PORT_ADDRESS 10 -#define PORT_FAIL 11 -#define PORT_ALT_STAT 12 - -typedef struct - { - UCHAR device; // device code - UCHAR byte6; // device select register image - UCHAR spigot; // spigot number - UCHAR expectingIRQ; // flag for expecting and interrupt - USHORT sectors; // number of sectors per track - USHORT heads; // number of heads - USHORT cylinders; // number of cylinders for this device - USHORT spareword; // placeholder - ULONG blocks; // number of blocks on device - } OUR_DEVICE, *POUR_DEVICE; - -typedef struct - { - USHORT ports[13]; - OUR_DEVICE device[8]; - struct scsi_cmnd *pSCmnd; - IDE_STRUCT ide; - ULONG startSector; - USHORT sectorCount; - struct scsi_cmnd *SCpnt; - VOID *buffer; - USHORT expectingIRQ; - } ADAPTER240I, *PADAPTER240I; - -#define HOSTDATA(host) ((PADAPTER240I)&host->hostdata) - -static struct Scsi_Host *PsiHost[6] = {NULL,}; /* One for each IRQ level (10-15) */ -static IDENTIFY_DATA identifyData; -static SETUP ChipSetup; - -static USHORT portAddr[6] = {CHIP_ADRS_0, CHIP_ADRS_1, CHIP_ADRS_2, CHIP_ADRS_3, CHIP_ADRS_4, CHIP_ADRS_5}; - -/**************************************************************** - * Name: WriteData :LOCAL - * - * Description: Write data to device. - * - * Parameters: padapter - Pointer adapter data structure. - * - * Returns: TRUE if drive does not assert DRQ in time. - * - ****************************************************************/ -static int WriteData (PADAPTER240I padapter) - { - ULONG timer; - USHORT *pports = padapter->ports; - - timer = jiffies + TIMEOUT_DRQ; // calculate the timeout value - do { - if ( inb_p (pports[PORT_STAT_CMD]) & IDE_STATUS_DRQ ) - { - outsw (pports[PORT_DATA], padapter->buffer, (USHORT)padapter->ide.ide.ide[2] * 256); - return 0; - } - } while ( time_after(timer, jiffies) ); // test for timeout - - padapter->ide.ide.ides.cmd = 0; // null out the command byte - return 1; - } -/**************************************************************** - * Name: IdeCmd :LOCAL - * - * Description: Process a queued command from the SCSI manager. - * - * Parameters: padapter - Pointer adapter data structure. - * - * Returns: Zero if no error or status register contents on error. - * - ****************************************************************/ -static UCHAR IdeCmd (PADAPTER240I padapter) - { - ULONG timer; - USHORT *pports = padapter->ports; - UCHAR status; - - outb_p (padapter->ide.ide.ides.spigot, pports[PORT_SEL_FAIL]); // select the spigot - outb_p (padapter->ide.ide.ide[6], pports[PORT_LBA_24]); // select the drive - timer = jiffies + TIMEOUT_READY; // calculate the timeout value - do { - status = inb_p (padapter->ports[PORT_STAT_CMD]); - if ( status & IDE_STATUS_DRDY ) - { - outb_p (padapter->ide.ide.ide[2], pports[PORT_SECTOR_COUNT]); - outb_p (padapter->ide.ide.ide[3], pports[PORT_LBA_0]); - outb_p (padapter->ide.ide.ide[4], pports[PORT_LBA_8]); - outb_p (padapter->ide.ide.ide[5], pports[PORT_LBA_16]); - padapter->expectingIRQ = 1; - outb_p (padapter->ide.ide.ide[7], pports[PORT_STAT_CMD]); - - if ( padapter->ide.ide.ides.cmd == IDE_CMD_WRITE_MULTIPLE ) - return (WriteData (padapter)); - - return 0; - } - } while ( time_after(timer, jiffies) ); // test for timeout - - padapter->ide.ide.ides.cmd = 0; // null out the command byte - return status; - } -/**************************************************************** - * Name: SetupTransfer :LOCAL - * - * Description: Setup a data transfer command. - * - * Parameters: padapter - Pointer adapter data structure. - * drive - Drive/head register upper nibble only. - * - * Returns: TRUE if no data to transfer. - * - ****************************************************************/ -static int SetupTransfer (PADAPTER240I padapter, UCHAR drive) - { - if ( padapter->sectorCount ) - { - *(ULONG *)padapter->ide.ide.ides.lba = padapter->startSector; - padapter->ide.ide.ide[6] |= drive; - padapter->ide.ide.ides.sectors = ( padapter->sectorCount > SECTORSXFER ) ? SECTORSXFER : padapter->sectorCount; - padapter->sectorCount -= padapter->ide.ide.ides.sectors; // bump the start and count for next xfer - padapter->startSector += padapter->ide.ide.ides.sectors; - return 0; - } - else - { - padapter->ide.ide.ides.cmd = 0; // null out the command byte - padapter->SCpnt = NULL; - return 1; - } - } -/**************************************************************** - * Name: DecodeError :LOCAL - * - * Description: Decode and process device errors. - * - * Parameters: pshost - Pointer to host data block. - * status - Status register code. - * - * Returns: The driver status code. - * - ****************************************************************/ -static ULONG DecodeError (struct Scsi_Host *pshost, UCHAR status) - { - PADAPTER240I padapter = HOSTDATA(pshost); - UCHAR error; - - padapter->expectingIRQ = 0; - padapter->SCpnt = NULL; - if ( status & IDE_STATUS_WRITE_FAULT ) - { - return DID_PARITY << 16; - } - if ( status & IDE_STATUS_BUSY ) - return DID_BUS_BUSY << 16; - - error = inb_p (padapter->ports[PORT_ERROR]); - DEB(printk ("\npsi240i error register: %x", error)); - switch ( error ) - { - case IDE_ERROR_AMNF: - case IDE_ERROR_TKONF: - case IDE_ERROR_ABRT: - case IDE_ERROR_IDFN: - case IDE_ERROR_UNC: - case IDE_ERROR_BBK: - default: - return DID_ERROR << 16; - } - return DID_ERROR << 16; - } -/**************************************************************** - * Name: Irq_Handler :LOCAL - * - * Description: Interrupt handler. - * - * Parameters: irq - Hardware IRQ number. - * dev_id - - * - * Returns: TRUE if drive is not ready in time. - * - ****************************************************************/ -static void Irq_Handler (int irq, void *dev_id) - { - struct Scsi_Host *shost; // Pointer to host data block - PADAPTER240I padapter; // Pointer to adapter control structure - USHORT *pports; // I/O port array - struct scsi_cmnd *SCpnt; - UCHAR status; - int z; - - DEB(printk ("\npsi240i received interrupt\n")); - - shost = PsiHost[irq - 10]; - if ( !shost ) - panic ("Splunge!"); - - padapter = HOSTDATA(shost); - pports = padapter->ports; - SCpnt = padapter->SCpnt; - - if ( !padapter->expectingIRQ ) - { - DEB(printk ("\npsi240i Unsolicited interrupt\n")); - return; - } - padapter->expectingIRQ = 0; - - status = inb_p (padapter->ports[PORT_STAT_CMD]); // read the device status - if ( status & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT) ) - goto irqerror; - - DEB(printk ("\npsi240i processing interrupt")); - switch ( padapter->ide.ide.ides.cmd ) // decide how to handle the interrupt - { - case IDE_CMD_READ_MULTIPLE: - if ( status & IDE_STATUS_DRQ ) - { - insw (pports[PORT_DATA], padapter->buffer, (USHORT)padapter->ide.ide.ides.sectors * 256); - padapter->buffer += padapter->ide.ide.ides.sectors * 512; - if ( SetupTransfer (padapter, padapter->ide.ide.ide[6] & 0xF0) ) - { - SCpnt->result = DID_OK << 16; - padapter->SCpnt = NULL; - SCpnt->scsi_done (SCpnt); - return; - } - if ( !(status = IdeCmd (padapter)) ) - return; - } - break; - - case IDE_CMD_WRITE_MULTIPLE: - padapter->buffer += padapter->ide.ide.ides.sectors * 512; - if ( SetupTransfer (padapter, padapter->ide.ide.ide[6] & 0xF0) ) - { - SCpnt->result = DID_OK << 16; - padapter->SCpnt = NULL; - SCpnt->scsi_done (SCpnt); - return; - } - if ( !(status = IdeCmd (padapter)) ) - return; - break; - - case IDE_COMMAND_IDENTIFY: - { - PINQUIRYDATA pinquiryData = SCpnt->request_buffer; - - if ( status & IDE_STATUS_DRQ ) - { - insw (pports[PORT_DATA], &identifyData, sizeof (identifyData) >> 1); - - memset (pinquiryData, 0, SCpnt->request_bufflen); // Zero INQUIRY data structure. - pinquiryData->DeviceType = 0; - pinquiryData->Versions = 2; - pinquiryData->AdditionalLength = 35 - 4; - - // Fill in vendor identification fields. - for ( z = 0; z < 8; z += 2 ) - { - pinquiryData->VendorId[z] = ((UCHAR *)identifyData.ModelNumber)[z + 1]; - pinquiryData->VendorId[z + 1] = ((UCHAR *)identifyData.ModelNumber)[z]; - } - - // Initialize unused portion of product id. - for ( z = 0; z < 4; z++ ) - pinquiryData->ProductId[12 + z] = ' '; - - // Move firmware revision from IDENTIFY data to - // product revision in INQUIRY data. - for ( z = 0; z < 4; z += 2 ) - { - pinquiryData->ProductRevisionLevel[z] = ((UCHAR *)identifyData.FirmwareRevision)[z + 1]; - pinquiryData->ProductRevisionLevel[z + 1] = ((UCHAR *)identifyData.FirmwareRevision)[z]; - } - - SCpnt->result = DID_OK << 16; - padapter->SCpnt = NULL; - SCpnt->scsi_done (SCpnt); - return; - } - break; - } - - default: - SCpnt->result = DID_OK << 16; - padapter->SCpnt = NULL; - SCpnt->scsi_done (SCpnt); - return; - } - -irqerror:; - DEB(printk ("\npsi240i error Device Status: %X\n", status)); - SCpnt->result = DecodeError (shost, status); - SCpnt->scsi_done (SCpnt); - } - -static irqreturn_t do_Irq_Handler (int irq, void *dev_id) -{ - unsigned long flags; - struct Scsi_Host *dev = dev_id; - - spin_lock_irqsave(dev->host_lock, flags); - Irq_Handler(irq, dev_id); - spin_unlock_irqrestore(dev->host_lock, flags); - return IRQ_HANDLED; -} - -/**************************************************************** - * Name: Psi240i_QueueCommand - * - * Description: Process a queued command from the SCSI manager. - * - * Parameters: SCpnt - Pointer to SCSI command structure. - * done - Pointer to done function to call. - * - * Returns: Status code. - * - ****************************************************************/ -static int Psi240i_QueueCommand(struct scsi_cmnd *SCpnt, - void (*done)(struct scsi_cmnd *)) - { - UCHAR *cdb = (UCHAR *)SCpnt->cmnd; - // Pointer to SCSI CDB - PADAPTER240I padapter = HOSTDATA (SCpnt->device->host); - // Pointer to adapter control structure - POUR_DEVICE pdev = &padapter->device [SCpnt->device->id]; - // Pointer to device information - UCHAR rc; - // command return code - - SCpnt->scsi_done = done; - padapter->ide.ide.ides.spigot = pdev->spigot; - padapter->buffer = SCpnt->request_buffer; - if (done) - { - if ( !pdev->device ) - { - SCpnt->result = DID_BAD_TARGET << 16; - done (SCpnt); - return 0; - } - } - else - { - printk("psi240i_queuecommand: %02X: done can't be NULL\n", *cdb); - return 0; - } - - switch ( *cdb ) - { - case SCSIOP_INQUIRY: // inquiry CDB - { - padapter->ide.ide.ide[6] = pdev->byte6; - padapter->ide.ide.ides.cmd = IDE_COMMAND_IDENTIFY; - break; - } - - case SCSIOP_TEST_UNIT_READY: // test unit ready CDB - SCpnt->result = DID_OK << 16; - done (SCpnt); - return 0; - - case SCSIOP_READ_CAPACITY: // read capctiy CDB - { - PREAD_CAPACITY_DATA pdata = (PREAD_CAPACITY_DATA)SCpnt->request_buffer; - - pdata->blksiz = 0x20000; - XANY2SCSI ((UCHAR *)&pdata->blks, pdev->blocks); - SCpnt->result = DID_OK << 16; - done (SCpnt); - return 0; - } - - case SCSIOP_VERIFY: // verify CDB - *(ULONG *)padapter->ide.ide.ides.lba = XSCSI2LONG (&cdb[2]); - padapter->ide.ide.ide[6] |= pdev->byte6; - padapter->ide.ide.ide[2] = (UCHAR)((USHORT)cdb[8] | ((USHORT)cdb[7] << 8)); - padapter->ide.ide.ides.cmd = IDE_COMMAND_VERIFY; - break; - - case SCSIOP_READ: // read10 CDB - padapter->startSector = XSCSI2LONG (&cdb[2]); - padapter->sectorCount = (USHORT)cdb[8] | ((USHORT)cdb[7] << 8); - SetupTransfer (padapter, pdev->byte6); - padapter->ide.ide.ides.cmd = IDE_CMD_READ_MULTIPLE; - break; - - case SCSIOP_READ6: // read6 CDB - padapter->startSector = SCSI2LONG (&cdb[1]); - padapter->sectorCount = cdb[4]; - SetupTransfer (padapter, pdev->byte6); - padapter->ide.ide.ides.cmd = IDE_CMD_READ_MULTIPLE; - break; - - case SCSIOP_WRITE: // write10 CDB - padapter->startSector = XSCSI2LONG (&cdb[2]); - padapter->sectorCount = (USHORT)cdb[8] | ((USHORT)cdb[7] << 8); - SetupTransfer (padapter, pdev->byte6); - padapter->ide.ide.ides.cmd = IDE_CMD_WRITE_MULTIPLE; - break; - case SCSIOP_WRITE6: // write6 CDB - padapter->startSector = SCSI2LONG (&cdb[1]); - padapter->sectorCount = cdb[4]; - SetupTransfer (padapter, pdev->byte6); - padapter->ide.ide.ides.cmd = IDE_CMD_WRITE_MULTIPLE; - break; - - default: - DEB (printk ("psi240i_queuecommand: Unsupported command %02X\n", *cdb)); - SCpnt->result = DID_ERROR << 16; - done (SCpnt); - return 0; - } - - padapter->SCpnt = SCpnt; // Save this command data - - rc = IdeCmd (padapter); - if ( rc ) - { - padapter->expectingIRQ = 0; - DEB (printk ("psi240i_queuecommand: %02X, %02X: Device failed to respond for command\n", *cdb, padapter->ide.ide.ides.cmd)); - SCpnt->result = DID_ERROR << 16; - done (SCpnt); - return 0; - } - DEB (printk("psi240i_queuecommand: %02X, %02X now waiting for interrupt ", *cdb, padapter->ide.ide.ides.cmd)); - return 0; - } - -/*************************************************************************** - * Name: ReadChipMemory - * - * Description: Read information from controller memory. - * - * Parameters: psetup - Pointer to memory image of setup information. - * base - base address of memory. - * length - lenght of data space in bytes. - * port - I/O address of data port. - * - * Returns: Nothing. - * - **************************************************************************/ -static void ReadChipMemory (void *pdata, USHORT base, USHORT length, USHORT port) - { - USHORT z, zz; - UCHAR *pd = (UCHAR *)pdata; - outb_p (SEL_NONE, port + REG_SEL_FAIL); // setup data port - zz = 0; - while ( zz < length ) - { - outw_p (base, port + REG_ADDRESS); // setup address - - for ( z = 0; z < 8; z++ ) - { - if ( (zz + z) < length ) - *pd++ = inb_p (port + z); // read data byte - } - zz += 8; - base += 8; - } - } -/**************************************************************** - * Name: Psi240i_Detect - * - * Description: Detect and initialize our boards. - * - * Parameters: tpnt - Pointer to SCSI host template structure. - * - * Returns: Number of adapters found. - * - ****************************************************************/ -static int Psi240i_Detect (struct scsi_host_template *tpnt) - { - int board; - int count = 0; - int unit; - int z; - USHORT port, port_range = 16; - CHIP_CONFIG_N chipConfig; - CHIP_DEVICE_N chipDevice[8]; - struct Scsi_Host *pshost; - - for ( board = 0; board < MAXBOARDS; board++ ) // scan for I/O ports - { - pshost = NULL; - port = portAddr[board]; // get base address to test - if ( !request_region (port, port_range, "psi240i") ) - continue; - if ( inb_p (port + REG_FAIL) != CHIP_ID ) // do the first test for likley hood that it is us - goto host_init_failure; - outb_p (SEL_NONE, port + REG_SEL_FAIL); // setup EEPROM/RAM access - outw (0, port + REG_ADDRESS); // setup EEPROM address zero - if ( inb_p (port) != 0x55 ) // test 1st byte - goto host_init_failure; // nope - if ( inb_p (port + 1) != 0xAA ) // test 2nd byte - goto host_init_failure; // nope - - // at this point our board is found and can be accessed. Now we need to initialize - // our informatation and register with the kernel. - - - ReadChipMemory (&chipConfig, CHIP_CONFIG, sizeof (chipConfig), port); - ReadChipMemory (&chipDevice, CHIP_DEVICE, sizeof (chipDevice), port); - ReadChipMemory (&ChipSetup, CHIP_EEPROM_DATA, sizeof (ChipSetup), port); - - if ( !chipConfig.numDrives ) // if no devices on this board - goto host_init_failure; - - pshost = scsi_register (tpnt, sizeof(ADAPTER240I)); - if(pshost == NULL) - goto host_init_failure; - - PsiHost[chipConfig.irq - 10] = pshost; - pshost->unique_id = port; - pshost->io_port = port; - pshost->n_io_port = 16; /* Number of bytes of I/O space used */ - pshost->irq = chipConfig.irq; - - for ( z = 0; z < 11; z++ ) // build regester address array - HOSTDATA(pshost)->ports[z] = port + z; - HOSTDATA(pshost)->ports[11] = port + REG_FAIL; - HOSTDATA(pshost)->ports[12] = port + REG_ALT_STAT; - DEB (printk ("\nPorts =")); - DEB (for (z=0;z<13;z++) printk(" %#04X",HOSTDATA(pshost)->ports[z]);); - - for ( z = 0; z < chipConfig.numDrives; ++z ) - { - unit = chipDevice[z].channel & 0x0F; - HOSTDATA(pshost)->device[unit].device = ChipSetup.setupDevice[unit].device; - HOSTDATA(pshost)->device[unit].byte6 = (UCHAR)(((unit & 1) << 4) | 0xE0); - HOSTDATA(pshost)->device[unit].spigot = (UCHAR)(1 << (unit >> 1)); - HOSTDATA(pshost)->device[unit].sectors = ChipSetup.setupDevice[unit].sectors; - HOSTDATA(pshost)->device[unit].heads = ChipSetup.setupDevice[unit].heads; - HOSTDATA(pshost)->device[unit].cylinders = ChipSetup.setupDevice[unit].cylinders; - HOSTDATA(pshost)->device[unit].blocks = ChipSetup.setupDevice[unit].blocks; - DEB (printk ("\nHOSTDATA->device = %X", HOSTDATA(pshost)->device[unit].device)); - DEB (printk ("\n byte6 = %X", HOSTDATA(pshost)->device[unit].byte6)); - DEB (printk ("\n spigot = %X", HOSTDATA(pshost)->device[unit].spigot)); - DEB (printk ("\n sectors = %X", HOSTDATA(pshost)->device[unit].sectors)); - DEB (printk ("\n heads = %X", HOSTDATA(pshost)->device[unit].heads)); - DEB (printk ("\n cylinders = %X", HOSTDATA(pshost)->device[unit].cylinders)); - DEB (printk ("\n blocks = %lX", HOSTDATA(pshost)->device[unit].blocks)); - } - - if ( request_irq (chipConfig.irq, do_Irq_Handler, 0, "psi240i", pshost) == 0 ) - { - printk("\nPSI-240I EIDE CONTROLLER: at I/O = %x IRQ = %d\n", port, chipConfig.irq); - printk("(C) 1997 Perceptive Solutions, Inc. All rights reserved\n\n"); - count++; - continue; - } - - printk ("Unable to allocate IRQ for PSI-240I controller.\n"); - -host_init_failure: - - release_region (port, port_range); - if (pshost) - scsi_unregister (pshost); - - } - return count; - } - -static int Psi240i_Release(struct Scsi_Host *shost) -{ - if (shost->irq) - free_irq(shost->irq, NULL); - if (shost->io_port && shost->n_io_port) - release_region(shost->io_port, shost->n_io_port); - scsi_unregister(shost); - return 0; -} - -/**************************************************************** - * Name: Psi240i_BiosParam - * - * Description: Process the biosparam request from the SCSI manager to - * return C/H/S data. - * - * Parameters: disk - Pointer to SCSI disk structure. - * dev - Major/minor number from kernel. - * geom - Pointer to integer array to place geometry data. - * - * Returns: zero. - * - ****************************************************************/ -static int Psi240i_BiosParam (struct scsi_device *sdev, struct block_device *dev, - sector_t capacity, int geom[]) - { - POUR_DEVICE pdev; - - pdev = &(HOSTDATA(sdev->host)->device[sdev_id(sdev)]); - - geom[0] = pdev->heads; - geom[1] = pdev->sectors; - geom[2] = pdev->cylinders; - return 0; - } - -MODULE_LICENSE("GPL"); - -static struct scsi_host_template driver_template = { - .proc_name = "psi240i", - .name = "PSI-240I EIDE Disk Controller", - .detect = Psi240i_Detect, - .release = Psi240i_Release, - .queuecommand = Psi240i_QueueCommand, - .bios_param = Psi240i_BiosParam, - .can_queue = 1, - .this_id = -1, - .sg_tablesize = SG_NONE, - .cmd_per_lun = 1, - .use_clustering = DISABLE_CLUSTERING, -}; -#include "scsi_module.c" diff --git a/drivers/scsi/psi240i.h b/drivers/scsi/psi240i.h deleted file mode 100644 index 21ebb9214004..000000000000 --- a/drivers/scsi/psi240i.h +++ /dev/null @@ -1,315 +0,0 @@ -/*+M************************************************************************* - * Perceptive Solutions, Inc. PSI-240I device driver proc support for Linux. - * - * Copyright (c) 1997 Perceptive Solutions, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * File Name: psi240i.h - * - * Description: Header file for the SCSI driver for the PSI240I - * EIDE interface card. - * - *-M*************************************************************************/ -#ifndef _PSI240I_H -#define _PSI240I_H - -#include - -#ifndef PSI_EIDE_SCSIOP -#define PSI_EIDE_SCSIOP 1 - -/************************************************/ -/* Some defines that we like */ -/************************************************/ -#define CHAR char -#define UCHAR unsigned char -#define SHORT short -#define USHORT unsigned short -#define BOOL unsigned short -#define LONG long -#define ULONG unsigned long -#define VOID void - -/************************************************/ -/* Timeout konstants */ -/************************************************/ -#define TIMEOUT_READY 10 // 100 mSec -#define TIMEOUT_DRQ 40 // 400 mSec - -/************************************************/ -/* Misc. macros */ -/************************************************/ -#define ANY2SCSI(up, p) \ -((UCHAR *)up)[0] = (((ULONG)(p)) >> 8); \ -((UCHAR *)up)[1] = ((ULONG)(p)); - -#define SCSI2LONG(up) \ -( (((long)*(((UCHAR *)up))) << 16) \ -+ (((long)(((UCHAR *)up)[1])) << 8) \ -+ ((long)(((UCHAR *)up)[2])) ) - -#define XANY2SCSI(up, p) \ -((UCHAR *)up)[0] = ((long)(p)) >> 24; \ -((UCHAR *)up)[1] = ((long)(p)) >> 16; \ -((UCHAR *)up)[2] = ((long)(p)) >> 8; \ -((UCHAR *)up)[3] = ((long)(p)); - -#define XSCSI2LONG(up) \ -( (((long)(((UCHAR *)up)[0])) << 24) \ -+ (((long)(((UCHAR *)up)[1])) << 16) \ -+ (((long)(((UCHAR *)up)[2])) << 8) \ -+ ((long)(((UCHAR *)up)[3])) ) - -/************************************************/ -/* SCSI CDB operation codes */ -/************************************************/ -#define SCSIOP_TEST_UNIT_READY 0x00 -#define SCSIOP_REZERO_UNIT 0x01 -#define SCSIOP_REWIND 0x01 -#define SCSIOP_REQUEST_BLOCK_ADDR 0x02 -#define SCSIOP_REQUEST_SENSE 0x03 -#define SCSIOP_FORMAT_UNIT 0x04 -#define SCSIOP_READ_BLOCK_LIMITS 0x05 -#define SCSIOP_REASSIGN_BLOCKS 0x07 -#define SCSIOP_READ6 0x08 -#define SCSIOP_RECEIVE 0x08 -#define SCSIOP_WRITE6 0x0A -#define SCSIOP_PRINT 0x0A -#define SCSIOP_SEND 0x0A -#define SCSIOP_SEEK6 0x0B -#define SCSIOP_TRACK_SELECT 0x0B -#define SCSIOP_SLEW_PRINT 0x0B -#define SCSIOP_SEEK_BLOCK 0x0C -#define SCSIOP_PARTITION 0x0D -#define SCSIOP_READ_REVERSE 0x0F -#define SCSIOP_WRITE_FILEMARKS 0x10 -#define SCSIOP_FLUSH_BUFFER 0x10 -#define SCSIOP_SPACE 0x11 -#define SCSIOP_INQUIRY 0x12 -#define SCSIOP_VERIFY6 0x13 -#define SCSIOP_RECOVER_BUF_DATA 0x14 -#define SCSIOP_MODE_SELECT 0x15 -#define SCSIOP_RESERVE_UNIT 0x16 -#define SCSIOP_RELEASE_UNIT 0x17 -#define SCSIOP_COPY 0x18 -#define SCSIOP_ERASE 0x19 -#define SCSIOP_MODE_SENSE 0x1A -#define SCSIOP_START_STOP_UNIT 0x1B -#define SCSIOP_STOP_PRINT 0x1B -#define SCSIOP_LOAD_UNLOAD 0x1B -#define SCSIOP_RECEIVE_DIAGNOSTIC 0x1C -#define SCSIOP_SEND_DIAGNOSTIC 0x1D -#define SCSIOP_MEDIUM_REMOVAL 0x1E -#define SCSIOP_READ_CAPACITY 0x25 -#define SCSIOP_READ 0x28 -#define SCSIOP_WRITE 0x2A -#define SCSIOP_SEEK 0x2B -#define SCSIOP_LOCATE 0x2B -#define SCSIOP_WRITE_VERIFY 0x2E -#define SCSIOP_VERIFY 0x2F -#define SCSIOP_SEARCH_DATA_HIGH 0x30 -#define SCSIOP_SEARCH_DATA_EQUAL 0x31 -#define SCSIOP_SEARCH_DATA_LOW 0x32 -#define SCSIOP_SET_LIMITS 0x33 -#define SCSIOP_READ_POSITION 0x34 -#define SCSIOP_SYNCHRONIZE_CACHE 0x35 -#define SCSIOP_COMPARE 0x39 -#define SCSIOP_COPY_COMPARE 0x3A -#define SCSIOP_WRITE_DATA_BUFF 0x3B -#define SCSIOP_READ_DATA_BUFF 0x3C -#define SCSIOP_CHANGE_DEFINITION 0x40 -#define SCSIOP_READ_SUB_CHANNEL 0x42 -#define SCSIOP_READ_TOC 0x43 -#define SCSIOP_READ_HEADER 0x44 -#define SCSIOP_PLAY_AUDIO 0x45 -#define SCSIOP_PLAY_AUDIO_MSF 0x47 -#define SCSIOP_PLAY_TRACK_INDEX 0x48 -#define SCSIOP_PLAY_TRACK_RELATIVE 0x49 -#define SCSIOP_PAUSE_RESUME 0x4B -#define SCSIOP_LOG_SELECT 0x4C -#define SCSIOP_LOG_SENSE 0x4D -#define SCSIOP_MODE_SELECT10 0x55 -#define SCSIOP_MODE_SENSE10 0x5A -#define SCSIOP_LOAD_UNLOAD_SLOT 0xA6 -#define SCSIOP_MECHANISM_STATUS 0xBD -#define SCSIOP_READ_CD 0xBE - -// IDE command definitions -#define IDE_COMMAND_ATAPI_RESET 0x08 -#define IDE_COMMAND_READ 0x20 -#define IDE_COMMAND_WRITE 0x30 -#define IDE_COMMAND_RECALIBRATE 0x10 -#define IDE_COMMAND_SEEK 0x70 -#define IDE_COMMAND_SET_PARAMETERS 0x91 -#define IDE_COMMAND_VERIFY 0x40 -#define IDE_COMMAND_ATAPI_PACKET 0xA0 -#define IDE_COMMAND_ATAPI_IDENTIFY 0xA1 -#define IDE_CMD_READ_MULTIPLE 0xC4 -#define IDE_CMD_WRITE_MULTIPLE 0xC5 -#define IDE_CMD_SET_MULTIPLE 0xC6 -#define IDE_COMMAND_WRITE_DMA 0xCA -#define IDE_COMMAND_READ_DMA 0xC8 -#define IDE_COMMAND_IDENTIFY 0xEC - -// IDE status definitions -#define IDE_STATUS_ERROR 0x01 -#define IDE_STATUS_INDEX 0x02 -#define IDE_STATUS_CORRECTED_ERROR 0x04 -#define IDE_STATUS_DRQ 0x08 -#define IDE_STATUS_DSC 0x10 -#define IDE_STATUS_WRITE_FAULT 0x20 -#define IDE_STATUS_DRDY 0x40 -#define IDE_STATUS_BUSY 0x80 - -// IDE error definitions -#define IDE_ERROR_AMNF 0x01 -#define IDE_ERROR_TKONF 0x02 -#define IDE_ERROR_ABRT 0x04 -#define IDE_ERROR_MCR 0x08 -#define IDE_ERROR_IDFN 0x10 -#define IDE_ERROR_MC 0x20 -#define IDE_ERROR_UNC 0x40 -#define IDE_ERROR_BBK 0x80 - -// IDE interface structure -typedef struct _IDE_STRUCT - { - union - { - UCHAR ide[9]; - struct - { - USHORT data; - UCHAR sectors; - UCHAR lba[4]; - UCHAR cmd; - UCHAR spigot; - } ides; - } ide; - } IDE_STRUCT; - -// SCSI read capacity structure -typedef struct _READ_CAPACITY_DATA - { - ULONG blks; /* total blocks (converted to little endian) */ - ULONG blksiz; /* size of each (converted to little endian) */ - } READ_CAPACITY_DATA, *PREAD_CAPACITY_DATA; - -// SCSI inquiry data -#ifndef HOSTS_C - -typedef struct _INQUIRYDATA - { - UCHAR DeviceType :5; - UCHAR DeviceTypeQualifier :3; - UCHAR DeviceTypeModifier :7; - UCHAR RemovableMedia :1; - UCHAR Versions; - UCHAR ResponseDataFormat; - UCHAR AdditionalLength; - UCHAR Reserved[2]; - UCHAR SoftReset :1; - UCHAR CommandQueue :1; - UCHAR Reserved2 :1; - UCHAR LinkedCommands :1; - UCHAR Synchronous :1; - UCHAR Wide16Bit :1; - UCHAR Wide32Bit :1; - UCHAR RelativeAddressing :1; - UCHAR VendorId[8]; - UCHAR ProductId[16]; - UCHAR ProductRevisionLevel[4]; - UCHAR VendorSpecific[20]; - UCHAR Reserved3[40]; - } INQUIRYDATA, *PINQUIRYDATA; -#endif - -// IDE IDENTIFY data -typedef struct _IDENTIFY_DATA - { - USHORT GeneralConfiguration; // 00 - USHORT NumberOfCylinders; // 02 - USHORT Reserved1; // 04 - USHORT NumberOfHeads; // 06 - USHORT UnformattedBytesPerTrack; // 08 - USHORT UnformattedBytesPerSector; // 0A - USHORT SectorsPerTrack; // 0C - USHORT VendorUnique1[3]; // 0E - USHORT SerialNumber[10]; // 14 - USHORT BufferType; // 28 - USHORT BufferSectorSize; // 2A - USHORT NumberOfEccBytes; // 2C - USHORT FirmwareRevision[4]; // 2E - USHORT ModelNumber[20]; // 36 - UCHAR MaximumBlockTransfer; // 5E - UCHAR VendorUnique2; // 5F - USHORT DoubleWordIo; // 60 - USHORT Capabilities; // 62 - USHORT Reserved2; // 64 - UCHAR VendorUnique3; // 66 - UCHAR PioCycleTimingMode; // 67 - UCHAR VendorUnique4; // 68 - UCHAR DmaCycleTimingMode; // 69 - USHORT TranslationFieldsValid:1; // 6A - USHORT Reserved3:15; - USHORT NumberOfCurrentCylinders; // 6C - USHORT NumberOfCurrentHeads; // 6E - USHORT CurrentSectorsPerTrack; // 70 - ULONG CurrentSectorCapacity; // 72 - USHORT Reserved4[197]; // 76 - } IDENTIFY_DATA, *PIDENTIFY_DATA; - -// Identify data without the Reserved4. -typedef struct _IDENTIFY_DATA2 { - USHORT GeneralConfiguration; // 00 - USHORT NumberOfCylinders; // 02 - USHORT Reserved1; // 04 - USHORT NumberOfHeads; // 06 - USHORT UnformattedBytesPerTrack; // 08 - USHORT UnformattedBytesPerSector; // 0A - USHORT SectorsPerTrack; // 0C - USHORT VendorUnique1[3]; // 0E - USHORT SerialNumber[10]; // 14 - USHORT BufferType; // 28 - USHORT BufferSectorSize; // 2A - USHORT NumberOfEccBytes; // 2C - USHORT FirmwareRevision[4]; // 2E - USHORT ModelNumber[20]; // 36 - UCHAR MaximumBlockTransfer; // 5E - UCHAR VendorUnique2; // 5F - USHORT DoubleWordIo; // 60 - USHORT Capabilities; // 62 - USHORT Reserved2; // 64 - UCHAR VendorUnique3; // 66 - UCHAR PioCycleTimingMode; // 67 - UCHAR VendorUnique4; // 68 - UCHAR DmaCycleTimingMode; // 69 - USHORT TranslationFieldsValid:1; // 6A - USHORT Reserved3:15; - USHORT NumberOfCurrentCylinders; // 6C - USHORT NumberOfCurrentHeads; // 6E - USHORT CurrentSectorsPerTrack; // 70 - ULONG CurrentSectorCapacity; // 72 - } IDENTIFY_DATA2, *PIDENTIFY_DATA2; - -#endif // PSI_EIDE_SCSIOP - -// function prototypes -int Psi240i_Command(struct scsi_cmnd *SCpnt); -int Psi240i_Abort(struct scsi_cmnd *SCpnt); -int Psi240i_Reset(struct scsi_cmnd *SCpnt, unsigned int flags); -#endif diff --git a/drivers/scsi/psi_chip.h b/drivers/scsi/psi_chip.h deleted file mode 100644 index 224cf8f64c97..000000000000 --- a/drivers/scsi/psi_chip.h +++ /dev/null @@ -1,195 +0,0 @@ -/*+M************************************************************************* - * Perceptive Solutions, Inc. PSI-240I device driver proc support for Linux. - * - * Copyright (c) 1997 Perceptive Solutions, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - * File Name: psi_chip.h - * - * Description: This file contains the interface defines and - * error codes. - * - *-M*************************************************************************/ -#ifndef PSI_CHIP -#define PSI_CHIP - -/************************************************/ -/* Misc konstants */ -/************************************************/ -#define CHIP_MAXDRIVES 8 - -/************************************************/ -/* Chip I/O addresses */ -/************************************************/ -#define CHIP_ADRS_0 0x0130 -#define CHIP_ADRS_1 0x0150 -#define CHIP_ADRS_2 0x0190 -#define CHIP_ADRS_3 0x0210 -#define CHIP_ADRS_4 0x0230 -#define CHIP_ADRS_5 0x0250 - -/************************************************/ -/* EEPROM locations */ -/************************************************/ -#define CHIP_EEPROM_BIOS 0x0000 // BIOS base address -#define CHIP_EEPROM_DATA 0x2000 // SETUP data base address -#define CHIP_EEPROM_FACTORY 0x2400 // FACTORY data base address -#define CHIP_EEPROM_SETUP 0x3000 // SETUP PROGRAM base address - -#define CHIP_EEPROM_SIZE 32768U // size of the entire EEPROM -#define CHIP_EEPROM_BIOS_SIZE 8192 // size of the BIOS in bytes -#define CHIP_EEPROM_DATA_SIZE 4096 // size of factory, setup, log data block in bytes -#define CHIP_EEPROM_SETUP_SIZE 20480U // size of the setup program in bytes - -/************************************************/ -/* Chip Interrupts */ -/************************************************/ -#define CHIP_IRQ_10 0x72 -#define CHIP_IRQ_11 0x73 -#define CHIP_IRQ_12 0x74 - -/************************************************/ -/* Chip Setup addresses */ -/************************************************/ -#define CHIP_SETUP_BASE 0x0000C000L - -/************************************************/ -/* Chip Register address offsets */ -/************************************************/ -#define REG_DATA 0x00 -#define REG_ERROR 0x01 -#define REG_SECTOR_COUNT 0x02 -#define REG_LBA_0 0x03 -#define REG_LBA_8 0x04 -#define REG_LBA_16 0x05 -#define REG_LBA_24 0x06 -#define REG_STAT_CMD 0x07 -#define REG_SEL_FAIL 0x08 -#define REG_IRQ_STATUS 0x09 -#define REG_ADDRESS 0x0A -#define REG_FAIL 0x0C -#define REG_ALT_STAT 0x0E -#define REG_DRIVE_ADRS 0x0F - -/************************************************/ -/* Chip RAM locations */ -/************************************************/ -#define CHIP_DEVICE 0x8000 -#define CHIP_DEVICE_0 0x8000 -#define CHIP_DEVICE_1 0x8008 -#define CHIP_DEVICE_2 0x8010 -#define CHIP_DEVICE_3 0x8018 -#define CHIP_DEVICE_4 0x8020 -#define CHIP_DEVICE_5 0x8028 -#define CHIP_DEVICE_6 0x8030 -#define CHIP_DEVICE_7 0x8038 -typedef struct - { - UCHAR channel; // channel of this device (0-8). - UCHAR spt; // Sectors Per Track. - ULONG spc; // Sectors Per Cylinder. - } CHIP_DEVICE_N; - -#define CHIP_CONFIG 0x8100 // address of boards configuration. -typedef struct - { - UCHAR irq; // interrupt request channel number - UCHAR numDrives; // Number of accessible drives - UCHAR fastFormat; // Boolean for fast format enable - } CHIP_CONFIG_N; - -#define CHIP_MAP 0x8108 // eight byte device type map. - - -#define CHIP_RAID 0x8120 // array of RAID signature structures and LBA -#define CHIP_RAID_1 0x8120 -#define CHIP_RAID_2 0x8130 -#define CHIP_RAID_3 0x8140 -#define CHIP_RAID_4 0x8150 - -/************************************************/ -/* Chip Register Masks */ -/************************************************/ -#define CHIP_ID 0x7B -#define SEL_RAM 0x8000 -#define MASK_FAIL 0x80 - -/************************************************/ -/* Chip cable select bits */ -/************************************************/ -#define SECTORSXFER 8 - -/************************************************/ -/* Chip cable select bits */ -/************************************************/ -#define SEL_NONE 0x00 -#define SEL_1 0x01 -#define SEL_2 0x02 -#define SEL_3 0x04 -#define SEL_4 0x08 - -/************************************************/ -/* Programmable Interrupt Controller*/ -/************************************************/ -#define PIC1 0x20 // first 8259 base port address -#define PIC2 0xA0 // second 8259 base port address -#define INT_OCW1 1 // Operation Control Word 1: IRQ mask -#define EOI 0x20 // non-specific end-of-interrupt - -/************************************************/ -/* Device/Geometry controls */ -/************************************************/ -#define GEOMETRY_NONE 0x0 // No device -#define GEOMETRY_AUTO 0x1 // Geometry set automatically -#define GEOMETRY_USER 0x2 // User supplied geometry - -#define DEVICE_NONE 0x0 // No device present -#define DEVICE_INACTIVE 0x1 // device present but not registered active -#define DEVICE_ATAPI 0x2 // ATAPI device (CD_ROM, Tape, Etc...) -#define DEVICE_DASD_NONLBA 0x3 // Non LBA incompatible device -#define DEVICE_DASD_LBA 0x4 // LBA compatible device - -/************************************************/ -/* Setup Structure Definitions */ -/************************************************/ -typedef struct // device setup parameters - { - UCHAR geometryControl; // geometry control flags - UCHAR device; // device code - USHORT sectors; // number of sectors per track - USHORT heads; // number of heads - USHORT cylinders; // number of cylinders for this device - ULONG blocks; // number of blocks on device - USHORT spare1; - USHORT spare2; - } SETUP_DEVICE, *PSETUP_DEVICE; - -typedef struct // master setup structure - { - USHORT startupDelay; - USHORT promptBIOS; - USHORT fastFormat; - USHORT spare2; - USHORT spare3; - USHORT spare4; - USHORT spare5; - USHORT spare6; - SETUP_DEVICE setupDevice[8]; - } SETUP, *PSETUP; - -#endif - -- cgit v1.2.3-59-g8ed1b From caa1e8c32131201193fc4711f5b07a36d3d941df Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Wed, 17 Oct 2007 10:43:20 +0200 Subject: [SCSI] seagate: Remove driver - Apparently no one wonts this driver, and no one is willing to fix it for future changes to SCSI. So remove it, and if someone wants it in the future He can revive it with the needed fixes. Signed-off-by: Boaz Harrosh Signed-off-by: James Bottomley --- drivers/scsi/Kconfig | 15 - drivers/scsi/Makefile | 2 - drivers/scsi/seagate.c | 1667 ------------------------------------------------ 3 files changed, 1684 deletions(-) delete mode 100644 drivers/scsi/seagate.c diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index ad44557fe204..becbb09d4c9b 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1348,21 +1348,6 @@ config SCSI_LPFC This lpfc driver supports the Emulex LightPulse Family of Fibre Channel PCI host adapters. -config SCSI_SEAGATE - tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support" - depends on X86 && ISA && SCSI - select CHECK_SIGNATURE - ---help--- - These are 8-bit SCSI controllers; the ST-01 is also supported by - this driver. It is explained in section 3.9 of the SCSI-HOWTO, - available from . If it - doesn't work out of the box, you may have to change some macros at - compiletime, which are described in . - - To compile this driver as a module, choose M here: the - module will be called seagate. - -# definitely looks not 64bit safe: config SCSI_SIM710 tristate "Simple 53c710 SCSI support (Compaq, NCR machines)" depends on (EISA || MCA) && SCSI diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 2cd739c0ac33..b5441f5a48fc 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -16,7 +16,6 @@ CFLAGS_aha152x.o = -DAHA152X_STAT -DAUTOCONF CFLAGS_gdth.o = # -DDEBUG_GDTH=2 -D__SERIAL__ -D__COM2__ -DGDTH_STATISTICS -CFLAGS_seagate.o = -DARBITRATE -DPARITY -DSEAGATE_USE_ASM subdir-$(CONFIG_PCMCIA) += pcmcia @@ -89,7 +88,6 @@ obj-$(CONFIG_SCSI_QLA_FC) += qla2xxx/ obj-$(CONFIG_SCSI_QLA_ISCSI) += qla4xxx/ obj-$(CONFIG_SCSI_LPFC) += lpfc/ obj-$(CONFIG_SCSI_PAS16) += pas16.o -obj-$(CONFIG_SCSI_SEAGATE) += seagate.o obj-$(CONFIG_SCSI_T128) += t128.o obj-$(CONFIG_SCSI_DMX3191D) += dmx3191d.o obj-$(CONFIG_SCSI_DTC3280) += dtc.o diff --git a/drivers/scsi/seagate.c b/drivers/scsi/seagate.c deleted file mode 100644 index b11324479b5b..000000000000 --- a/drivers/scsi/seagate.c +++ /dev/null @@ -1,1667 +0,0 @@ -/* - * seagate.c Copyright (C) 1992, 1993 Drew Eckhardt - * low level scsi driver for ST01/ST02, Future Domain TMC-885, - * TMC-950 by Drew Eckhardt - * - * Note : TMC-880 boards don't work because they have two bits in - * the status register flipped, I'll fix this "RSN" - * [why do I have strong feeling that above message is from 1993? :-) - * pavel@ucw.cz] - * - * This card does all the I/O via memory mapped I/O, so there is no need - * to check or allocate a region of the I/O address space. - */ - -/* 1996 - to use new read{b,w,l}, write{b,w,l}, and phys_to_virt - * macros, replaced assembler routines with C. There's probably a - * performance hit, but I only have a cdrom and can't tell. Define - * SEAGATE_USE_ASM if you want the old assembler code -- SJT - * - * 1998-jul-29 - created DPRINTK macros and made it work under - * linux 2.1.112, simplified some #defines etc. - * - * Aug 2000 - aeb - deleted seagate_st0x_biosparam(). It would try to - * read the physical disk geometry, a bad mistake. Of course it doesn't - * matter much what geometry one invents, but on large disks it - * returned 256 (or more) heads, causing all kind of failures. - * Of course this means that people might see a different geometry now, - * so boot parameters may be necessary in some cases. - */ - -/* - * Configuration : - * To use without BIOS -DOVERRIDE=base_address -DCONTROLLER=FD or SEAGATE - * -DIRQ will override the default of 5. - * Note: You can now set these options from the kernel's "command line". - * The syntax is: - * - * st0x=ADDRESS,IRQ (for a Seagate controller) - * or: - * tmc8xx=ADDRESS,IRQ (for a TMC-8xx or TMC-950 controller) - * eg: - * tmc8xx=0xC8000,15 - * - * will configure the driver for a TMC-8xx style controller using IRQ 15 - * with a base address of 0xC8000. - * - * -DARBITRATE - * Will cause the host adapter to arbitrate for the - * bus for better SCSI-II compatibility, rather than just - * waiting for BUS FREE and then doing its thing. Should - * let us do one command per Lun when I integrate my - * reorganization changes into the distribution sources. - * - * -DDEBUG=65535 - * Will activate debug code. - * - * -DFAST or -DFAST32 - * Will use blind transfers where possible - * - * -DPARITY - * This will enable parity. - * - * -DSEAGATE_USE_ASM - * Will use older seagate assembly code. should be (very small amount) - * Faster. - * - * -DSLOW_RATE=50 - * Will allow compatibility with broken devices that don't - * handshake fast enough (ie, some CD ROM's) for the Seagate - * code. - * - * 50 is some number, It will let you specify a default - * transfer rate if handshaking isn't working correctly. - * - * -DOLDCNTDATASCEME There is a new sceme to set the CONTROL - * and DATA reigsters which complies more closely - * with the SCSI2 standard. This hopefully eliminates - * the need to swap the order these registers are - * 'messed' with. It makes the following two options - * obsolete. To reenable the old sceme define this. - * - * The following to options are patches from the SCSI.HOWTO - * - * -DSWAPSTAT This will swap the definitions for STAT_MSG and STAT_CD. - * - * -DSWAPCNTDATA This will swap the order that seagate.c messes with - * the CONTROL an DATA registers. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -#include -#include - - -#ifdef DEBUG -#define DPRINTK( when, msg... ) do { if ( (DEBUG & (when)) == (when) ) printk( msg ); } while (0) -#else -#define DPRINTK( when, msg... ) do { } while (0) -#define DEBUG 0 -#endif -#define DANY( msg... ) DPRINTK( 0xffff, msg ); - -#ifndef IRQ -#define IRQ 5 -#endif - -#ifdef FAST32 -#define FAST -#endif - -#undef LINKED /* Linked commands are currently broken! */ - -#if defined(OVERRIDE) && !defined(CONTROLLER) -#error Please use -DCONTROLLER=SEAGATE or -DCONTROLLER=FD to override controller type -#endif - -#ifndef __i386__ -#undef SEAGATE_USE_ASM -#endif - -/* - Thanks to Brian Antoine for the example code in his Messy-Loss ST-01 - driver, and Mitsugu Suzuki for information on the ST-01 - SCSI host. -*/ - -/* - CONTROL defines -*/ - -#define CMD_RST 0x01 -#define CMD_SEL 0x02 -#define CMD_BSY 0x04 -#define CMD_ATTN 0x08 -#define CMD_START_ARB 0x10 -#define CMD_EN_PARITY 0x20 -#define CMD_INTR 0x40 -#define CMD_DRVR_ENABLE 0x80 - -/* - STATUS -*/ -#ifdef SWAPSTAT -#define STAT_MSG 0x08 -#define STAT_CD 0x02 -#else -#define STAT_MSG 0x02 -#define STAT_CD 0x08 -#endif - -#define STAT_BSY 0x01 -#define STAT_IO 0x04 -#define STAT_REQ 0x10 -#define STAT_SEL 0x20 -#define STAT_PARITY 0x40 -#define STAT_ARB_CMPL 0x80 - -/* - REQUESTS -*/ - -#define REQ_MASK (STAT_CD | STAT_IO | STAT_MSG) -#define REQ_DATAOUT 0 -#define REQ_DATAIN STAT_IO -#define REQ_CMDOUT STAT_CD -#define REQ_STATIN (STAT_CD | STAT_IO) -#define REQ_MSGOUT (STAT_MSG | STAT_CD) -#define REQ_MSGIN (STAT_MSG | STAT_CD | STAT_IO) - -extern volatile int seagate_st0x_timeout; - -#ifdef PARITY -#define BASE_CMD CMD_EN_PARITY -#else -#define BASE_CMD 0 -#endif - -/* - Debugging code -*/ - -#define PHASE_BUS_FREE 1 -#define PHASE_ARBITRATION 2 -#define PHASE_SELECTION 4 -#define PHASE_DATAIN 8 -#define PHASE_DATAOUT 0x10 -#define PHASE_CMDOUT 0x20 -#define PHASE_MSGIN 0x40 -#define PHASE_MSGOUT 0x80 -#define PHASE_STATUSIN 0x100 -#define PHASE_ETC (PHASE_DATAIN | PHASE_DATAOUT | PHASE_CMDOUT | PHASE_MSGIN | PHASE_MSGOUT | PHASE_STATUSIN) -#define PRINT_COMMAND 0x200 -#define PHASE_EXIT 0x400 -#define PHASE_RESELECT 0x800 -#define DEBUG_FAST 0x1000 -#define DEBUG_SG 0x2000 -#define DEBUG_LINKED 0x4000 -#define DEBUG_BORKEN 0x8000 - -/* - * Control options - these are timeouts specified in .01 seconds. - */ - -/* 30, 20 work */ -#define ST0X_BUS_FREE_DELAY 25 -#define ST0X_SELECTION_DELAY 25 - -#define SEAGATE 1 /* these determine the type of the controller */ -#define FD 2 - -#define ST0X_ID_STR "Seagate ST-01/ST-02" -#define FD_ID_STR "TMC-8XX/TMC-950" - -static int internal_command (unsigned char target, unsigned char lun, - const void *cmnd, - void *buff, int bufflen, int reselect); - -static int incommand; /* set if arbitration has finished - and we are in some command phase. */ - -static unsigned int base_address = 0; /* Where the card ROM starts, used to - calculate memory mapped register - location. */ - -static void __iomem *st0x_cr_sr; /* control register write, status - register read. 256 bytes in - length. - Read is status of SCSI BUS, as per - STAT masks. */ - -static void __iomem *st0x_dr; /* data register, read write 256 - bytes in length. */ - -static volatile int st0x_aborted = 0; /* set when we are aborted, ie by a - time out, etc. */ - -static unsigned char controller_type = 0; /* set to SEAGATE for ST0x - boards or FD for TMC-8xx - boards */ -static int irq = IRQ; - -module_param(base_address, uint, 0); -module_param(controller_type, byte, 0); -module_param(irq, int, 0); -MODULE_LICENSE("GPL"); - - -#define retcode(result) (((result) << 16) | (message << 8) | status) -#define STATUS ((u8) readb(st0x_cr_sr)) -#define DATA ((u8) readb(st0x_dr)) -#define WRITE_CONTROL(d) { writeb((d), st0x_cr_sr); } -#define WRITE_DATA(d) { writeb((d), st0x_dr); } - -#ifndef OVERRIDE -static unsigned int seagate_bases[] = { - 0xc8000, 0xca000, 0xcc000, - 0xce000, 0xdc000, 0xde000 -}; - -typedef struct { - const unsigned char *signature; - unsigned offset; - unsigned length; - unsigned char type; -} Signature; - -static Signature __initdata signatures[] = { - {"ST01 v1.7 (C) Copyright 1987 Seagate", 15, 37, SEAGATE}, - {"SCSI BIOS 2.00 (C) Copyright 1987 Seagate", 15, 40, SEAGATE}, - -/* - * The following two lines are NOT mistakes. One detects ROM revision - * 3.0.0, the other 3.2. Since seagate has only one type of SCSI adapter, - * and this is not going to change, the "SEAGATE" and "SCSI" together - * are probably "good enough" - */ - - {"SEAGATE SCSI BIOS ", 16, 17, SEAGATE}, - {"SEAGATE SCSI BIOS ", 17, 17, SEAGATE}, - -/* - * However, future domain makes several incompatible SCSI boards, so specific - * signatures must be used. - */ - - {"FUTURE DOMAIN CORP. (C) 1986-1989 V5.0C2/14/89", 5, 46, FD}, - {"FUTURE DOMAIN CORP. (C) 1986-1989 V6.0A7/28/89", 5, 46, FD}, - {"FUTURE DOMAIN CORP. (C) 1986-1990 V6.0105/31/90", 5, 47, FD}, - {"FUTURE DOMAIN CORP. (C) 1986-1990 V6.0209/18/90", 5, 47, FD}, - {"FUTURE DOMAIN CORP. (C) 1986-1990 V7.009/18/90", 5, 46, FD}, - {"FUTURE DOMAIN CORP. (C) 1992 V8.00.004/02/92", 5, 44, FD}, - {"IBM F1 BIOS V1.1004/30/92", 5, 25, FD}, - {"FUTURE DOMAIN TMC-950", 5, 21, FD}, - /* Added for 2.2.16 by Matthias_Heidbrink@b.maus.de */ - {"IBM F1 V1.2009/22/93", 5, 25, FD}, -}; - -#define NUM_SIGNATURES ARRAY_SIZE(signatures) -#endif /* n OVERRIDE */ - -/* - * hostno stores the hostnumber, as told to us by the init routine. - */ - -static int hostno = -1; -static void seagate_reconnect_intr (int, void *); -static irqreturn_t do_seagate_reconnect_intr (int, void *); -static int seagate_st0x_bus_reset(struct scsi_cmnd *); - -#ifdef FAST -static int fast = 1; -#else -#define fast 0 -#endif - -#ifdef SLOW_RATE -/* - * Support for broken devices : - * The Seagate board has a handshaking problem. Namely, a lack - * thereof for slow devices. You can blast 600K/second through - * it if you are polling for each byte, more if you do a blind - * transfer. In the first case, with a fast device, REQ will - * transition high-low or high-low-high before your loop restarts - * and you'll have no problems. In the second case, the board - * will insert wait states for up to 13.2 usecs for REQ to - * transition low->high, and everything will work. - * - * However, there's nothing in the state machine that says - * you *HAVE* to see a high-low-high set of transitions before - * sending the next byte, and slow things like the Trantor CD ROMS - * will break because of this. - * - * So, we need to slow things down, which isn't as simple as it - * seems. We can't slow things down period, because then people - * who don't recompile their kernels will shoot me for ruining - * their performance. We need to do it on a case per case basis. - * - * The best for performance will be to, only for borken devices - * (this is stored on a per-target basis in the scsi_devices array) - * - * Wait for a low->high transition before continuing with that - * transfer. If we timeout, continue anyways. We don't need - * a long timeout, because REQ should only be asserted until the - * corresponding ACK is received and processed. - * - * Note that we can't use the system timer for this, because of - * resolution, and we *really* can't use the timer chip since - * gettimeofday() and the beeper routines use that. So, - * the best thing for us to do will be to calibrate a timing - * loop in the initialization code using the timer chip before - * gettimeofday() can screw with it. - * - * FIXME: this is broken (not borken :-). Empty loop costs less than - * loop with ISA access in it! -- pavel@ucw.cz - */ - -static int borken_calibration = 0; - -static void __init borken_init (void) -{ - register int count = 0, start = jiffies + 1, stop = start + 25; - - /* FIXME: There may be a better approach, this is a straight port for - now */ - preempt_disable(); - while (time_before (jiffies, start)) - cpu_relax(); - for (; time_before (jiffies, stop); ++count) - cpu_relax(); - preempt_enable(); - -/* - * Ok, we now have a count for .25 seconds. Convert to a - * count per second and divide by transfer rate in K. */ - - borken_calibration = (count * 4) / (SLOW_RATE * 1024); - - if (borken_calibration < 1) - borken_calibration = 1; -} - -static inline void borken_wait (void) -{ - register int count; - - for (count = borken_calibration; count && (STATUS & STAT_REQ); --count) - cpu_relax(); - -#if (DEBUG & DEBUG_BORKEN) - if (count) - printk ("scsi%d : borken timeout\n", hostno); -#endif -} - -#endif /* def SLOW_RATE */ - -/* These beasts only live on ISA, and ISA means 8MHz. Each ULOOP() - * contains at least one ISA access, which takes more than 0.125 - * usec. So if we loop 8 times time in usec, we are safe. - */ - -#define ULOOP( i ) for (clock = i*8;;) -#define TIMEOUT (!(clock--)) - -static int __init seagate_st0x_detect (struct scsi_host_template * tpnt) -{ - struct Scsi_Host *instance; - int i, j; - unsigned long cr, dr; - - tpnt->proc_name = "seagate"; -/* - * First, we try for the manual override. - */ - DANY ("Autodetecting ST0x / TMC-8xx\n"); - - if (hostno != -1) { - printk (KERN_ERR "seagate_st0x_detect() called twice?!\n"); - return 0; - } - -/* If the user specified the controller type from the command line, - controller_type will be non-zero, so don't try to detect one */ - - if (!controller_type) { -#ifdef OVERRIDE - base_address = OVERRIDE; - controller_type = CONTROLLER; - - DANY ("Base address overridden to %x, controller type is %s\n", - base_address, - controller_type == SEAGATE ? "SEAGATE" : "FD"); -#else /* OVERRIDE */ -/* - * To detect this card, we simply look for the signature - * from the BIOS version notice in all the possible locations - * of the ROM's. This has a nice side effect of not trashing - * any register locations that might be used by something else. - * - * XXX - note that we probably should be probing the address - * space for the on-board RAM instead. - */ - - for (i = 0; i < ARRAY_SIZE(seagate_bases); ++i) { - void __iomem *p = ioremap(seagate_bases[i], 0x2000); - if (!p) - continue; - for (j = 0; j < NUM_SIGNATURES; ++j) - if (check_signature(p + signatures[j].offset, signatures[j].signature, signatures[j].length)) { - base_address = seagate_bases[i]; - controller_type = signatures[j].type; - break; - } - iounmap(p); - } -#endif /* OVERRIDE */ - } - /* (! controller_type) */ - tpnt->this_id = (controller_type == SEAGATE) ? 7 : 6; - tpnt->name = (controller_type == SEAGATE) ? ST0X_ID_STR : FD_ID_STR; - - if (!base_address) { - printk(KERN_INFO "seagate: ST0x/TMC-8xx not detected.\n"); - return 0; - } - - cr = base_address + (controller_type == SEAGATE ? 0x1a00 : 0x1c00); - dr = cr + 0x200; - st0x_cr_sr = ioremap(cr, 0x100); - st0x_dr = ioremap(dr, 0x100); - - DANY("%s detected. Base address = %x, cr = %x, dr = %x\n", - tpnt->name, base_address, cr, dr); - - /* - * At all times, we will use IRQ 5. Should also check for IRQ3 - * if we lose our first interrupt. - */ - instance = scsi_register (tpnt, 0); - if (instance == NULL) - return 0; - - hostno = instance->host_no; - if (request_irq (irq, do_seagate_reconnect_intr, IRQF_DISABLED, (controller_type == SEAGATE) ? "seagate" : "tmc-8xx", instance)) { - printk(KERN_ERR "scsi%d : unable to allocate IRQ%d\n", hostno, irq); - return 0; - } - instance->irq = irq; - instance->io_port = base_address; -#ifdef SLOW_RATE - printk(KERN_INFO "Calibrating borken timer... "); - borken_init(); - printk(" %d cycles per transfer\n", borken_calibration); -#endif - printk (KERN_INFO "This is one second... "); - { - int clock; - ULOOP (1 * 1000 * 1000) { - STATUS; - if (TIMEOUT) - break; - } - } - - printk ("done, %s options:" -#ifdef ARBITRATE - " ARBITRATE" -#endif -#if DEBUG - " DEBUG" -#endif -#ifdef FAST - " FAST" -#ifdef FAST32 - "32" -#endif -#endif -#ifdef LINKED - " LINKED" -#endif -#ifdef PARITY - " PARITY" -#endif -#ifdef SEAGATE_USE_ASM - " SEAGATE_USE_ASM" -#endif -#ifdef SLOW_RATE - " SLOW_RATE" -#endif -#ifdef SWAPSTAT - " SWAPSTAT" -#endif -#ifdef SWAPCNTDATA - " SWAPCNTDATA" -#endif - "\n", tpnt->name); - return 1; -} - -static const char *seagate_st0x_info (struct Scsi_Host *shpnt) -{ - static char buffer[64]; - - snprintf(buffer, 64, "%s at irq %d, address 0x%05X", - (controller_type == SEAGATE) ? ST0X_ID_STR : FD_ID_STR, - irq, base_address); - return buffer; -} - -/* - * These are our saved pointers for the outstanding command that is - * waiting for a reconnect - */ - -static unsigned char current_target, current_lun; -static unsigned char *current_cmnd, *current_data; -static int current_nobuffs; -static struct scatterlist *current_buffer; -static int current_bufflen; - -#ifdef LINKED -/* - * linked_connected indicates whether or not we are currently connected to - * linked_target, linked_lun and in an INFORMATION TRANSFER phase, - * using linked commands. - */ - -static int linked_connected = 0; -static unsigned char linked_target, linked_lun; -#endif - -static void (*done_fn) (struct scsi_cmnd *) = NULL; -static struct scsi_cmnd *SCint = NULL; - -/* - * These control whether or not disconnect / reconnect will be attempted, - * or are being attempted. - */ - -#define NO_RECONNECT 0 -#define RECONNECT_NOW 1 -#define CAN_RECONNECT 2 - -/* - * LINKED_RIGHT indicates that we are currently connected to the correct target - * for this command, LINKED_WRONG indicates that we are connected to the wrong - * target. Note that these imply CAN_RECONNECT and require defined(LINKED). - */ - -#define LINKED_RIGHT 3 -#define LINKED_WRONG 4 - -/* - * This determines if we are expecting to reconnect or not. - */ - -static int should_reconnect = 0; - -/* - * The seagate_reconnect_intr routine is called when a target reselects the - * host adapter. This occurs on the interrupt triggered by the target - * asserting SEL. - */ - -static irqreturn_t do_seagate_reconnect_intr(int irq, void *dev_id) -{ - unsigned long flags; - struct Scsi_Host *dev = dev_id; - - spin_lock_irqsave (dev->host_lock, flags); - seagate_reconnect_intr (irq, dev_id); - spin_unlock_irqrestore (dev->host_lock, flags); - return IRQ_HANDLED; -} - -static void seagate_reconnect_intr (int irq, void *dev_id) -{ - int temp; - struct scsi_cmnd *SCtmp; - - DPRINTK (PHASE_RESELECT, "scsi%d : seagate_reconnect_intr() called\n", hostno); - - if (!should_reconnect) - printk(KERN_WARNING "scsi%d: unexpected interrupt.\n", hostno); - else { - should_reconnect = 0; - - DPRINTK (PHASE_RESELECT, "scsi%d : internal_command(%d, %08x, %08x, RECONNECT_NOW\n", - hostno, current_target, current_data, current_bufflen); - - temp = internal_command (current_target, current_lun, current_cmnd, current_data, current_bufflen, RECONNECT_NOW); - - if (msg_byte(temp) != DISCONNECT) { - if (done_fn) { - DPRINTK(PHASE_RESELECT, "scsi%d : done_fn(%d,%08x)", hostno, hostno, temp); - if (!SCint) - panic ("SCint == NULL in seagate"); - SCtmp = SCint; - SCint = NULL; - SCtmp->result = temp; - done_fn(SCtmp); - } else - printk(KERN_ERR "done_fn() not defined.\n"); - } - } -} - -/* - * The seagate_st0x_queue_command() function provides a queued interface - * to the seagate SCSI driver. Basically, it just passes control onto the - * seagate_command() function, after fixing it so that the done_fn() - * is set to the one passed to the function. We have to be very careful, - * because there are some commands on some devices that do not disconnect, - * and if we simply call the done_fn when the command is done then another - * command is started and queue_command is called again... We end up - * overflowing the kernel stack, and this tends not to be such a good idea. - */ - -static int recursion_depth = 0; - -static int seagate_st0x_queue_command(struct scsi_cmnd * SCpnt, - void (*done) (struct scsi_cmnd *)) -{ - int result, reconnect; - struct scsi_cmnd *SCtmp; - - DANY ("seagate: que_command"); - done_fn = done; - current_target = SCpnt->device->id; - current_lun = SCpnt->device->lun; - current_cmnd = SCpnt->cmnd; - current_data = (unsigned char *) SCpnt->request_buffer; - current_bufflen = SCpnt->request_bufflen; - SCint = SCpnt; - if (recursion_depth) - return 1; - recursion_depth++; - do { -#ifdef LINKED - /* - * Set linked command bit in control field of SCSI command. - */ - - current_cmnd[SCpnt->cmd_len] |= 0x01; - if (linked_connected) { - DPRINTK (DEBUG_LINKED, "scsi%d : using linked commands, current I_T_L nexus is ", hostno); - if (linked_target == current_target && linked_lun == current_lun) - { - DPRINTK(DEBUG_LINKED, "correct\n"); - reconnect = LINKED_RIGHT; - } else { - DPRINTK(DEBUG_LINKED, "incorrect\n"); - reconnect = LINKED_WRONG; - } - } else -#endif /* LINKED */ - reconnect = CAN_RECONNECT; - - result = internal_command(SCint->device->id, SCint->device->lun, SCint->cmnd, - SCint->request_buffer, SCint->request_bufflen, reconnect); - if (msg_byte(result) == DISCONNECT) - break; - SCtmp = SCint; - SCint = NULL; - SCtmp->result = result; - done_fn(SCtmp); - } - while (SCint); - recursion_depth--; - return 0; -} - -static int internal_command (unsigned char target, unsigned char lun, - const void *cmnd, void *buff, int bufflen, int reselect) -{ - unsigned char *data = NULL; - struct scatterlist *buffer = NULL; - int clock, temp, nobuffs = 0, done = 0, len = 0; -#if DEBUG - int transfered = 0, phase = 0, newphase; -#endif - register unsigned char status_read; - unsigned char tmp_data, tmp_control, status = 0, message = 0; - unsigned transfersize = 0, underflow = 0; -#ifdef SLOW_RATE - int borken = (int) SCint->device->borken; /* Does the current target require - Very Slow I/O ? */ -#endif - - incommand = 0; - st0x_aborted = 0; - -#if (DEBUG & PRINT_COMMAND) - printk("scsi%d : target = %d, command = ", hostno, target); - __scsi_print_command((unsigned char *) cmnd); -#endif - -#if (DEBUG & PHASE_RESELECT) - switch (reselect) { - case RECONNECT_NOW: - printk("scsi%d : reconnecting\n", hostno); - break; -#ifdef LINKED - case LINKED_RIGHT: - printk("scsi%d : connected, can reconnect\n", hostno); - break; - case LINKED_WRONG: - printk("scsi%d : connected to wrong target, can reconnect\n", - hostno); - break; -#endif - case CAN_RECONNECT: - printk("scsi%d : allowed to reconnect\n", hostno); - break; - default: - printk("scsi%d : not allowed to reconnect\n", hostno); - } -#endif - - if (target == (controller_type == SEAGATE ? 7 : 6)) - return DID_BAD_TARGET; - - /* - * We work it differently depending on if this is is "the first time," - * or a reconnect. If this is a reselect phase, then SEL will - * be asserted, and we must skip selection / arbitration phases. - */ - - switch (reselect) { - case RECONNECT_NOW: - DPRINTK (PHASE_RESELECT, "scsi%d : phase RESELECT \n", hostno); - /* - * At this point, we should find the logical or of our ID - * and the original target's ID on the BUS, with BSY, SEL, - * and I/O signals asserted. - * - * After ARBITRATION phase is completed, only SEL, BSY, - * and the target ID are asserted. A valid initiator ID - * is not on the bus until IO is asserted, so we must wait - * for that. - */ - ULOOP (100 * 1000) { - temp = STATUS; - if ((temp & STAT_IO) && !(temp & STAT_BSY)) - break; - if (TIMEOUT) { - DPRINTK (PHASE_RESELECT, "scsi%d : RESELECT timed out while waiting for IO .\n", hostno); - return (DID_BAD_INTR << 16); - } - } - - /* - * After I/O is asserted by the target, we can read our ID - * and its ID off of the BUS. - */ - - if (!((temp = DATA) & (controller_type == SEAGATE ? 0x80 : 0x40))) { - DPRINTK (PHASE_RESELECT, "scsi%d : detected reconnect request to different target.\n\tData bus = %d\n", hostno, temp); - return (DID_BAD_INTR << 16); - } - - if (!(temp & (1 << current_target))) { - printk(KERN_WARNING "scsi%d : Unexpected reselect interrupt. Data bus = %d\n", hostno, temp); - return (DID_BAD_INTR << 16); - } - - buffer = current_buffer; - cmnd = current_cmnd; /* WDE add */ - data = current_data; /* WDE add */ - len = current_bufflen; /* WDE add */ - nobuffs = current_nobuffs; - - /* - * We have determined that we have been selected. At this - * point, we must respond to the reselection by asserting - * BSY ourselves - */ - -#if 1 - WRITE_CONTROL (BASE_CMD | CMD_DRVR_ENABLE | CMD_BSY); -#else - WRITE_CONTROL (BASE_CMD | CMD_BSY); -#endif - - /* - * The target will drop SEL, and raise BSY, at which time - * we must drop BSY. - */ - - ULOOP (100 * 1000) { - if (!(STATUS & STAT_SEL)) - break; - if (TIMEOUT) { - WRITE_CONTROL (BASE_CMD | CMD_INTR); - DPRINTK (PHASE_RESELECT, "scsi%d : RESELECT timed out while waiting for SEL.\n", hostno); - return (DID_BAD_INTR << 16); - } - } - WRITE_CONTROL (BASE_CMD); - /* - * At this point, we have connected with the target - * and can get on with our lives. - */ - break; - case CAN_RECONNECT: -#ifdef LINKED - /* - * This is a bletcherous hack, just as bad as the Unix #! - * interpreter stuff. If it turns out we are using the wrong - * I_T_L nexus, the easiest way to deal with it is to go into - * our INFORMATION TRANSFER PHASE code, send a ABORT - * message on MESSAGE OUT phase, and then loop back to here. - */ -connect_loop: -#endif - DPRINTK (PHASE_BUS_FREE, "scsi%d : phase = BUS FREE \n", hostno); - - /* - * BUS FREE PHASE - * - * On entry, we make sure that the BUS is in a BUS FREE - * phase, by insuring that both BSY and SEL are low for - * at least one bus settle delay. Several reads help - * eliminate wire glitch. - */ - -#ifndef ARBITRATE -#error FIXME: this is broken: we may not use jiffies here - we are under cli(). It will hardlock. - clock = jiffies + ST0X_BUS_FREE_DELAY; - - while (((STATUS | STATUS | STATUS) & (STAT_BSY | STAT_SEL)) && (!st0x_aborted) && time_before (jiffies, clock)) - cpu_relax(); - - if (time_after (jiffies, clock)) - return retcode (DID_BUS_BUSY); - else if (st0x_aborted) - return retcode (st0x_aborted); -#endif - DPRINTK (PHASE_SELECTION, "scsi%d : phase = SELECTION\n", hostno); - - clock = jiffies + ST0X_SELECTION_DELAY; - - /* - * Arbitration/selection procedure : - * 1. Disable drivers - * 2. Write HOST adapter address bit - * 3. Set start arbitration. - * 4. We get either ARBITRATION COMPLETE or SELECT at this - * point. - * 5. OR our ID and targets on bus. - * 6. Enable SCSI drivers and asserted SEL and ATTN - */ - -#ifdef ARBITRATE - /* FIXME: verify host lock is always held here */ - WRITE_CONTROL(0); - WRITE_DATA((controller_type == SEAGATE) ? 0x80 : 0x40); - WRITE_CONTROL(CMD_START_ARB); - - ULOOP (ST0X_SELECTION_DELAY * 10000) { - status_read = STATUS; - if (status_read & STAT_ARB_CMPL) - break; - if (st0x_aborted) /* FIXME: What? We are going to do something even after abort? */ - break; - if (TIMEOUT || (status_read & STAT_SEL)) { - printk(KERN_WARNING "scsi%d : arbitration lost or timeout.\n", hostno); - WRITE_CONTROL (BASE_CMD); - return retcode (DID_NO_CONNECT); - } - } - DPRINTK (PHASE_SELECTION, "scsi%d : arbitration complete\n", hostno); -#endif - - /* - * When the SCSI device decides that we're gawking at it, - * it will respond by asserting BUSY on the bus. - * - * Note : the Seagate ST-01/02 product manual says that we - * should twiddle the DATA register before the control - * register. However, this does not work reliably so we do - * it the other way around. - * - * Probably could be a problem with arbitration too, we - * really should try this with a SCSI protocol or logic - * analyzer to see what is going on. - */ - tmp_data = (unsigned char) ((1 << target) | (controller_type == SEAGATE ? 0x80 : 0x40)); - tmp_control = BASE_CMD | CMD_DRVR_ENABLE | CMD_SEL | (reselect ? CMD_ATTN : 0); - - /* FIXME: verify host lock is always held here */ -#ifdef OLDCNTDATASCEME -#ifdef SWAPCNTDATA - WRITE_CONTROL (tmp_control); - WRITE_DATA (tmp_data); -#else - WRITE_DATA (tmp_data); - WRITE_CONTROL (tmp_control); -#endif -#else - tmp_control ^= CMD_BSY; /* This is guesswork. What used to be in driver */ - WRITE_CONTROL (tmp_control); /* could never work: it sent data into control */ - WRITE_DATA (tmp_data); /* register and control info into data. Hopefully */ - tmp_control ^= CMD_BSY; /* fixed, but order of first two may be wrong. */ - WRITE_CONTROL (tmp_control); /* -- pavel@ucw.cz */ -#endif - - ULOOP (250 * 1000) { - if (st0x_aborted) { - /* - * If we have been aborted, and we have a - * command in progress, IE the target - * still has BSY asserted, then we will - * reset the bus, and notify the midlevel - * driver to expect sense. - */ - - WRITE_CONTROL (BASE_CMD); - if (STATUS & STAT_BSY) { - printk(KERN_WARNING "scsi%d : BST asserted after we've been aborted.\n", hostno); - seagate_st0x_bus_reset(NULL); - return retcode (DID_RESET); - } - return retcode (st0x_aborted); - } - if (STATUS & STAT_BSY) - break; - if (TIMEOUT) { - DPRINTK (PHASE_SELECTION, "scsi%d : NO CONNECT with target %d, stat = %x \n", hostno, target, STATUS); - return retcode (DID_NO_CONNECT); - } - } - - /* Establish current pointers. Take into account scatter / gather */ - - if ((nobuffs = SCint->use_sg)) { -#if (DEBUG & DEBUG_SG) - { - int i; - printk("scsi%d : scatter gather requested, using %d buffers.\n", hostno, nobuffs); - for (i = 0; i < nobuffs; ++i) - printk("scsi%d : buffer %d address = %p length = %d\n", - hostno, i, - sg_virt(&buffer[i]), - buffer[i].length); - } -#endif - - buffer = (struct scatterlist *) SCint->request_buffer; - len = buffer->length; - data = sg_virt(buffer); - } else { - DPRINTK (DEBUG_SG, "scsi%d : scatter gather not requested.\n", hostno); - buffer = NULL; - len = SCint->request_bufflen; - data = (unsigned char *) SCint->request_buffer; - } - - DPRINTK (PHASE_DATAIN | PHASE_DATAOUT, "scsi%d : len = %d\n", - hostno, len); - - break; -#ifdef LINKED - case LINKED_RIGHT: - break; - case LINKED_WRONG: - break; -#endif - } /* end of switch(reselect) */ - - /* - * There are several conditions under which we wish to send a message : - * 1. When we are allowing disconnect / reconnect, and need to - * establish the I_T_L nexus via an IDENTIFY with the DiscPriv bit - * set. - * - * 2. When we are doing linked commands, are have the wrong I_T_L - * nexus established and want to send an ABORT message. - */ - - /* GCC does not like an ifdef inside a macro, so do it the hard way. */ -#ifdef LINKED - WRITE_CONTROL (BASE_CMD | CMD_DRVR_ENABLE | (((reselect == CAN_RECONNECT)|| (reselect == LINKED_WRONG))? CMD_ATTN : 0)); -#else - WRITE_CONTROL (BASE_CMD | CMD_DRVR_ENABLE | (((reselect == CAN_RECONNECT))? CMD_ATTN : 0)); -#endif - - /* - * INFORMATION TRANSFER PHASE - * - * The nasty looking read / write inline assembler loops we use for - * DATAIN and DATAOUT phases are approximately 4-5 times as fast as - * the 'C' versions - since we're moving 1024 bytes of data, this - * really adds up. - * - * SJT: The nasty-looking assembler is gone, so it's slower. - * - */ - - DPRINTK (PHASE_ETC, "scsi%d : phase = INFORMATION TRANSFER\n", hostno); - - incommand = 1; - transfersize = SCint->transfersize; - underflow = SCint->underflow; - - /* - * Now, we poll the device for status information, - * and handle any requests it makes. Note that since we are unsure - * of how much data will be flowing across the system, etc and - * cannot make reasonable timeouts, that we will instead have the - * midlevel driver handle any timeouts that occur in this phase. - */ - - while (((status_read = STATUS) & STAT_BSY) && !st0x_aborted && !done) { -#ifdef PARITY - if (status_read & STAT_PARITY) { - printk(KERN_ERR "scsi%d : got parity error\n", hostno); - st0x_aborted = DID_PARITY; - } -#endif - if (status_read & STAT_REQ) { -#if ((DEBUG & PHASE_ETC) == PHASE_ETC) - if ((newphase = (status_read & REQ_MASK)) != phase) { - phase = newphase; - switch (phase) { - case REQ_DATAOUT: - printk ("scsi%d : phase = DATA OUT\n", hostno); - break; - case REQ_DATAIN: - printk ("scsi%d : phase = DATA IN\n", hostno); - break; - case REQ_CMDOUT: - printk - ("scsi%d : phase = COMMAND OUT\n", hostno); - break; - case REQ_STATIN: - printk ("scsi%d : phase = STATUS IN\n", hostno); - break; - case REQ_MSGOUT: - printk - ("scsi%d : phase = MESSAGE OUT\n", hostno); - break; - case REQ_MSGIN: - printk ("scsi%d : phase = MESSAGE IN\n", hostno); - break; - default: - printk ("scsi%d : phase = UNKNOWN\n", hostno); - st0x_aborted = DID_ERROR; - } - } -#endif - switch (status_read & REQ_MASK) { - case REQ_DATAOUT: - /* - * If we are in fast mode, then we simply splat - * the data out in word-sized chunks as fast as - * we can. - */ - - if (!len) { -#if 0 - printk("scsi%d: underflow to target %d lun %d \n", hostno, target, lun); - st0x_aborted = DID_ERROR; - fast = 0; -#endif - break; - } - - if (fast && transfersize - && !(len % transfersize) - && (len >= transfersize) -#ifdef FAST32 - && !(transfersize % 4) -#endif - ) { - DPRINTK (DEBUG_FAST, - "scsi%d : FAST transfer, underflow = %d, transfersize = %d\n" - " len = %d, data = %08x\n", - hostno, SCint->underflow, - SCint->transfersize, len, - data); - - /* SJT: Start. Fast Write */ -#ifdef SEAGATE_USE_ASM - __asm__ ("cld\n\t" -#ifdef FAST32 - "shr $2, %%ecx\n\t" - "1:\t" - "lodsl\n\t" - "movl %%eax, (%%edi)\n\t" -#else - "1:\t" - "lodsb\n\t" - "movb %%al, (%%edi)\n\t" -#endif - "loop 1b;" - /* output */ : - /* input */ :"D" (st0x_dr), - "S" - (data), - "c" (SCint->transfersize) -/* clobbered */ - : "eax", "ecx", - "esi"); -#else /* SEAGATE_USE_ASM */ - memcpy_toio(st0x_dr, data, transfersize); -#endif /* SEAGATE_USE_ASM */ -/* SJT: End */ - len -= transfersize; - data += transfersize; - DPRINTK (DEBUG_FAST, "scsi%d : FAST transfer complete len = %d data = %08x\n", hostno, len, data); - } else { - /* - * We loop as long as we are in a - * data out phase, there is data to - * send, and BSY is still active. - */ - -/* SJT: Start. Slow Write. */ -#ifdef SEAGATE_USE_ASM - - int __dummy_1, __dummy_2; - -/* - * We loop as long as we are in a data out phase, there is data to send, - * and BSY is still active. - */ -/* Local variables : len = ecx , data = esi, - st0x_cr_sr = ebx, st0x_dr = edi -*/ - __asm__ ( - /* Test for any data here at all. */ - "orl %%ecx, %%ecx\n\t" - "jz 2f\n\t" "cld\n\t" -/* "movl st0x_cr_sr, %%ebx\n\t" */ -/* "movl st0x_dr, %%edi\n\t" */ - "1:\t" - "movb (%%ebx), %%al\n\t" - /* Test for BSY */ - "test $1, %%al\n\t" - "jz 2f\n\t" - /* Test for data out phase - STATUS & REQ_MASK should be - REQ_DATAOUT, which is 0. */ - "test $0xe, %%al\n\t" - "jnz 2f\n\t" - /* Test for REQ */ - "test $0x10, %%al\n\t" - "jz 1b\n\t" - "lodsb\n\t" - "movb %%al, (%%edi)\n\t" - "loop 1b\n\t" "2:\n" - /* output */ :"=S" (data), "=c" (len), - "=b" - (__dummy_1), - "=D" (__dummy_2) -/* input */ - : "0" (data), "1" (len), - "2" (st0x_cr_sr), - "3" (st0x_dr) -/* clobbered */ - : "eax"); -#else /* SEAGATE_USE_ASM */ - while (len) { - unsigned char stat; - - stat = STATUS; - if (!(stat & STAT_BSY) - || ((stat & REQ_MASK) != - REQ_DATAOUT)) - break; - if (stat & STAT_REQ) { - WRITE_DATA (*data++); - --len; - } - } -#endif /* SEAGATE_USE_ASM */ -/* SJT: End. */ - } - - if (!len && nobuffs) { - --nobuffs; - ++buffer; - len = buffer->length; - data = sg_virt(buffer); - DPRINTK (DEBUG_SG, - "scsi%d : next scatter-gather buffer len = %d address = %08x\n", - hostno, len, data); - } - break; - - case REQ_DATAIN: -#ifdef SLOW_RATE - if (borken) { -#if (DEBUG & (PHASE_DATAIN)) - transfered += len; -#endif - for (; len && (STATUS & (REQ_MASK | STAT_REQ)) == (REQ_DATAIN | STAT_REQ); --len) { - *data++ = DATA; - borken_wait(); - } -#if (DEBUG & (PHASE_DATAIN)) - transfered -= len; -#endif - } else -#endif - - if (fast && transfersize - && !(len % transfersize) - && (len >= transfersize) -#ifdef FAST32 - && !(transfersize % 4) -#endif - ) { - DPRINTK (DEBUG_FAST, - "scsi%d : FAST transfer, underflow = %d, transfersize = %d\n" - " len = %d, data = %08x\n", - hostno, SCint->underflow, - SCint->transfersize, len, - data); - -/* SJT: Start. Fast Read */ -#ifdef SEAGATE_USE_ASM - __asm__ ("cld\n\t" -#ifdef FAST32 - "shr $2, %%ecx\n\t" - "1:\t" - "movl (%%esi), %%eax\n\t" - "stosl\n\t" -#else - "1:\t" - "movb (%%esi), %%al\n\t" - "stosb\n\t" -#endif - "loop 1b\n\t" - /* output */ : - /* input */ :"S" (st0x_dr), - "D" - (data), - "c" (SCint->transfersize) -/* clobbered */ - : "eax", "ecx", - "edi"); -#else /* SEAGATE_USE_ASM */ - memcpy_fromio(data, st0x_dr, len); -#endif /* SEAGATE_USE_ASM */ -/* SJT: End */ - len -= transfersize; - data += transfersize; -#if (DEBUG & PHASE_DATAIN) - printk ("scsi%d: transfered += %d\n", hostno, transfersize); - transfered += transfersize; -#endif - - DPRINTK (DEBUG_FAST, "scsi%d : FAST transfer complete len = %d data = %08x\n", hostno, len, data); - } else { - -#if (DEBUG & PHASE_DATAIN) - printk ("scsi%d: transfered += %d\n", hostno, len); - transfered += len; /* Assume we'll transfer it all, then - subtract what we *didn't* transfer */ -#endif - -/* - * We loop as long as we are in a data in phase, there is room to read, - * and BSY is still active - */ - -/* SJT: Start. */ -#ifdef SEAGATE_USE_ASM - - int __dummy_3, __dummy_4; - -/* Dummy clobbering variables for the new gcc-2.95 */ - -/* - * We loop as long as we are in a data in phase, there is room to read, - * and BSY is still active - */ - /* Local variables : ecx = len, edi = data - esi = st0x_cr_sr, ebx = st0x_dr */ - __asm__ ( - /* Test for room to read */ - "orl %%ecx, %%ecx\n\t" - "jz 2f\n\t" "cld\n\t" -/* "movl st0x_cr_sr, %%esi\n\t" */ -/* "movl st0x_dr, %%ebx\n\t" */ - "1:\t" - "movb (%%esi), %%al\n\t" - /* Test for BSY */ - "test $1, %%al\n\t" - "jz 2f\n\t" - /* Test for data in phase - STATUS & REQ_MASK should be REQ_DATAIN, - = STAT_IO, which is 4. */ - "movb $0xe, %%ah\n\t" - "andb %%al, %%ah\n\t" - "cmpb $0x04, %%ah\n\t" - "jne 2f\n\t" - /* Test for REQ */ - "test $0x10, %%al\n\t" - "jz 1b\n\t" - "movb (%%ebx), %%al\n\t" - "stosb\n\t" - "loop 1b\n\t" "2:\n" - /* output */ :"=D" (data), "=c" (len), - "=S" - (__dummy_3), - "=b" (__dummy_4) -/* input */ - : "0" (data), "1" (len), - "2" (st0x_cr_sr), - "3" (st0x_dr) -/* clobbered */ - : "eax"); -#else /* SEAGATE_USE_ASM */ - while (len) { - unsigned char stat; - - stat = STATUS; - if (!(stat & STAT_BSY) - || ((stat & REQ_MASK) != - REQ_DATAIN)) - break; - if (stat & STAT_REQ) { - *data++ = DATA; - --len; - } - } -#endif /* SEAGATE_USE_ASM */ -/* SJT: End. */ -#if (DEBUG & PHASE_DATAIN) - printk ("scsi%d: transfered -= %d\n", hostno, len); - transfered -= len; /* Since we assumed all of Len got * - transfered, correct our mistake */ -#endif - } - - if (!len && nobuffs) { - --nobuffs; - ++buffer; - len = buffer->length; - data = sg_virt(buffer); - DPRINTK (DEBUG_SG, "scsi%d : next scatter-gather buffer len = %d address = %08x\n", hostno, len, data); - } - break; - - case REQ_CMDOUT: - while (((status_read = STATUS) & STAT_BSY) && - ((status_read & REQ_MASK) == REQ_CMDOUT)) - if (status_read & STAT_REQ) { - WRITE_DATA (*(const unsigned char *) cmnd); - cmnd = 1 + (const unsigned char *)cmnd; -#ifdef SLOW_RATE - if (borken) - borken_wait (); -#endif - } - break; - - case REQ_STATIN: - status = DATA; - break; - - case REQ_MSGOUT: - /* - * We can only have sent a MSG OUT if we - * requested to do this by raising ATTN. - * So, we must drop ATTN. - */ - WRITE_CONTROL (BASE_CMD | CMD_DRVR_ENABLE); - /* - * If we are reconnecting, then we must - * send an IDENTIFY message in response - * to MSGOUT. - */ - switch (reselect) { - case CAN_RECONNECT: - WRITE_DATA (IDENTIFY (1, lun)); - DPRINTK (PHASE_RESELECT | PHASE_MSGOUT, "scsi%d : sent IDENTIFY message.\n", hostno); - break; -#ifdef LINKED - case LINKED_WRONG: - WRITE_DATA (ABORT); - linked_connected = 0; - reselect = CAN_RECONNECT; - goto connect_loop; - DPRINTK (PHASE_MSGOUT | DEBUG_LINKED, "scsi%d : sent ABORT message to cancel incorrect I_T_L nexus.\n", hostno); -#endif /* LINKED */ - DPRINTK (DEBUG_LINKED, "correct\n"); - default: - WRITE_DATA (NOP); - printk("scsi%d : target %d requested MSGOUT, sent NOP message.\n", hostno, target); - } - break; - - case REQ_MSGIN: - switch (message = DATA) { - case DISCONNECT: - DANY("seagate: deciding to disconnect\n"); - should_reconnect = 1; - current_data = data; /* WDE add */ - current_buffer = buffer; - current_bufflen = len; /* WDE add */ - current_nobuffs = nobuffs; -#ifdef LINKED - linked_connected = 0; -#endif - done = 1; - DPRINTK ((PHASE_RESELECT | PHASE_MSGIN), "scsi%d : disconnected.\n", hostno); - break; - -#ifdef LINKED - case LINKED_CMD_COMPLETE: - case LINKED_FLG_CMD_COMPLETE: -#endif - case COMMAND_COMPLETE: - /* - * Note : we should check for underflow here. - */ - DPRINTK(PHASE_MSGIN, "scsi%d : command complete.\n", hostno); - done = 1; - break; - case ABORT: - DPRINTK(PHASE_MSGIN, "scsi%d : abort message.\n", hostno); - done = 1; - break; - case SAVE_POINTERS: - current_buffer = buffer; - current_bufflen = len; /* WDE add */ - current_data = data; /* WDE mod */ - current_nobuffs = nobuffs; - DPRINTK (PHASE_MSGIN, "scsi%d : pointers saved.\n", hostno); - break; - case RESTORE_POINTERS: - buffer = current_buffer; - cmnd = current_cmnd; - data = current_data; /* WDE mod */ - len = current_bufflen; - nobuffs = current_nobuffs; - DPRINTK(PHASE_MSGIN, "scsi%d : pointers restored.\n", hostno); - break; - default: - - /* - * IDENTIFY distinguishes itself - * from the other messages by - * setting the high bit. - * - * Note : we need to handle at - * least one outstanding command - * per LUN, and need to hash the - * SCSI command for that I_T_L - * nexus based on the known ID - * (at this point) and LUN. - */ - - if (message & 0x80) { - DPRINTK (PHASE_MSGIN, "scsi%d : IDENTIFY message received from id %d, lun %d.\n", hostno, target, message & 7); - } else { - /* - * We should go into a - * MESSAGE OUT phase, and - * send a MESSAGE_REJECT - * if we run into a message - * that we don't like. The - * seagate driver needs - * some serious - * restructuring first - * though. - */ - DPRINTK (PHASE_MSGIN, "scsi%d : unknown message %d from target %d.\n", hostno, message, target); - } - } - break; - default: - printk(KERN_ERR "scsi%d : unknown phase.\n", hostno); - st0x_aborted = DID_ERROR; - } /* end of switch (status_read & REQ_MASK) */ -#ifdef SLOW_RATE - /* - * I really don't care to deal with borken devices in - * each single byte transfer case (ie, message in, - * message out, status), so I'll do the wait here if - * necessary. - */ - if(borken) - borken_wait(); -#endif - - } /* if(status_read & STAT_REQ) ends */ - } /* while(((status_read = STATUS)...) ends */ - - DPRINTK(PHASE_DATAIN | PHASE_DATAOUT | PHASE_EXIT, "scsi%d : Transfered %d bytes\n", hostno, transfered); - -#if (DEBUG & PHASE_EXIT) -#if 0 /* Doesn't work for scatter/gather */ - printk("Buffer : \n"); - for(i = 0; i < 20; ++i) - printk("%02x ", ((unsigned char *) data)[i]); /* WDE mod */ - printk("\n"); -#endif - printk("scsi%d : status = ", hostno); - scsi_print_status(status); - printk(" message = %02x\n", message); -#endif - - /* We shouldn't reach this until *after* BSY has been deasserted */ - -#ifdef LINKED - else - { - /* - * Fix the message byte so that unsuspecting high level drivers - * don't puke when they see a LINKED COMMAND message in place of - * the COMMAND COMPLETE they may be expecting. Shouldn't be - * necessary, but it's better to be on the safe side. - * - * A non LINKED* message byte will indicate that the command - * completed, and we are now disconnected. - */ - - switch (message) { - case LINKED_CMD_COMPLETE: - case LINKED_FLG_CMD_COMPLETE: - message = COMMAND_COMPLETE; - linked_target = current_target; - linked_lun = current_lun; - linked_connected = 1; - DPRINTK (DEBUG_LINKED, "scsi%d : keeping I_T_L nexus established for linked command.\n", hostno); - /* We also will need to adjust status to accommodate intermediate - conditions. */ - if ((status == INTERMEDIATE_GOOD) || (status == INTERMEDIATE_C_GOOD)) - status = GOOD; - break; - /* - * We should also handle what are "normal" termination - * messages here (ABORT, BUS_DEVICE_RESET?, and - * COMMAND_COMPLETE individually, and flake if things - * aren't right. - */ - default: - DPRINTK (DEBUG_LINKED, "scsi%d : closing I_T_L nexus.\n", hostno); - linked_connected = 0; - } - } -#endif /* LINKED */ - - if (should_reconnect) { - DPRINTK (PHASE_RESELECT, "scsi%d : exiting seagate_st0x_queue_command() with reconnect enabled.\n", hostno); - WRITE_CONTROL (BASE_CMD | CMD_INTR); - } else - WRITE_CONTROL (BASE_CMD); - - return retcode (st0x_aborted); -} /* end of internal_command */ - -static int seagate_st0x_abort(struct scsi_cmnd * SCpnt) -{ - st0x_aborted = DID_ABORT; - return SUCCESS; -} - -#undef ULOOP -#undef TIMEOUT - -/* - * the seagate_st0x_reset function resets the SCSI bus - * - * May be called with SCpnt = NULL - */ - -static int seagate_st0x_bus_reset(struct scsi_cmnd * SCpnt) -{ - /* No timeouts - this command is going to fail because it was reset. */ - DANY ("scsi%d: Reseting bus... ", hostno); - - /* assert RESET signal on SCSI bus. */ - WRITE_CONTROL (BASE_CMD | CMD_RST); - - mdelay (20); - - WRITE_CONTROL (BASE_CMD); - st0x_aborted = DID_RESET; - - DANY ("done.\n"); - return SUCCESS; -} - -static int seagate_st0x_release(struct Scsi_Host *shost) -{ - if (shost->irq) - free_irq(shost->irq, shost); - release_region(shost->io_port, shost->n_io_port); - return 0; -} - -static struct scsi_host_template driver_template = { - .detect = seagate_st0x_detect, - .release = seagate_st0x_release, - .info = seagate_st0x_info, - .queuecommand = seagate_st0x_queue_command, - .eh_abort_handler = seagate_st0x_abort, - .eh_bus_reset_handler = seagate_st0x_bus_reset, - .can_queue = 1, - .this_id = 7, - .sg_tablesize = SG_ALL, - .cmd_per_lun = 1, - .use_clustering = DISABLE_CLUSTERING, -}; -#include "scsi_module.c" -- cgit v1.2.3-59-g8ed1b From dd829d2302c6b0f88542ca367229d676cb9ca212 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 9 Sep 2007 20:22:23 +0300 Subject: [SCSI] usb: protocol - convert to accessors and !use_sg code path removal - Use scsi data accessors and remove of !use_sg code path Signed-off-by: Boaz Harrosh Acked-by: Matthew Dharm Signed-off-by: James Bottomley --- drivers/usb/storage/protocol.c | 126 +++++++++++++++++------------------------ 1 file changed, 53 insertions(+), 73 deletions(-) diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c index 889622baac20..a41ce21c0697 100644 --- a/drivers/usb/storage/protocol.c +++ b/drivers/usb/storage/protocol.c @@ -149,11 +149,7 @@ void usb_stor_transparent_scsi_command(struct scsi_cmnd *srb, ***********************************************************************/ /* Copy a buffer of length buflen to/from the srb's transfer buffer. - * (Note: for scatter-gather transfers (srb->use_sg > 0), srb->request_buffer - * points to a list of s-g entries and we ignore srb->request_bufflen. - * For non-scatter-gather transfers, srb->request_buffer points to the - * transfer buffer itself and srb->request_bufflen is the buffer's length.) - * Update the *index and *offset variables so that the next copy will + * Update the **sgptr and *offset variables so that the next copy will * pick up from where this one left off. */ unsigned int usb_stor_access_xfer_buf(unsigned char *buffer, @@ -162,80 +158,64 @@ unsigned int usb_stor_access_xfer_buf(unsigned char *buffer, { unsigned int cnt; - /* If not using scatter-gather, just transfer the data directly. - * Make certain it will fit in the available buffer space. */ - if (srb->use_sg == 0) { - if (*offset >= srb->request_bufflen) - return 0; - cnt = min(buflen, srb->request_bufflen - *offset); - if (dir == TO_XFER_BUF) - memcpy((unsigned char *) srb->request_buffer + *offset, - buffer, cnt); - else - memcpy(buffer, (unsigned char *) srb->request_buffer + - *offset, cnt); - *offset += cnt; - - /* Using scatter-gather. We have to go through the list one entry + /* We have to go through the list one entry * at a time. Each s-g entry contains some number of pages, and * each page has to be kmap()'ed separately. If the page is already * in kernel-addressable memory then kmap() will return its address. * If the page is not directly accessible -- such as a user buffer * located in high memory -- then kmap() will map it to a temporary * position in the kernel's virtual address space. */ - } else { - struct scatterlist *sg = *sgptr; - - if (!sg) - sg = (struct scatterlist *) srb->request_buffer; - - /* This loop handles a single s-g list entry, which may - * include multiple pages. Find the initial page structure - * and the starting offset within the page, and update - * the *offset and *index values for the next loop. */ - cnt = 0; - while (cnt < buflen) { - struct page *page = sg_page(sg) + - ((sg->offset + *offset) >> PAGE_SHIFT); - unsigned int poff = - (sg->offset + *offset) & (PAGE_SIZE-1); - unsigned int sglen = sg->length - *offset; - - if (sglen > buflen - cnt) { - - /* Transfer ends within this s-g entry */ - sglen = buflen - cnt; - *offset += sglen; - } else { - - /* Transfer continues to next s-g entry */ - *offset = 0; - sg = sg_next(sg); - } - - /* Transfer the data for all the pages in this - * s-g entry. For each page: call kmap(), do the - * transfer, and call kunmap() immediately after. */ - while (sglen > 0) { - unsigned int plen = min(sglen, (unsigned int) - PAGE_SIZE - poff); - unsigned char *ptr = kmap(page); - - if (dir == TO_XFER_BUF) - memcpy(ptr + poff, buffer + cnt, plen); - else - memcpy(buffer + cnt, ptr + poff, plen); - kunmap(page); - - /* Start at the beginning of the next page */ - poff = 0; - ++page; - cnt += plen; - sglen -= plen; - } + struct scatterlist *sg = *sgptr; + + if (!sg) + sg = scsi_sglist(srb); + + /* This loop handles a single s-g list entry, which may + * include multiple pages. Find the initial page structure + * and the starting offset within the page, and update + * the *offset and **sgptr values for the next loop. */ + cnt = 0; + while (cnt < buflen) { + struct page *page = sg_page(sg) + + ((sg->offset + *offset) >> PAGE_SHIFT); + unsigned int poff = + (sg->offset + *offset) & (PAGE_SIZE-1); + unsigned int sglen = sg->length - *offset; + + if (sglen > buflen - cnt) { + + /* Transfer ends within this s-g entry */ + sglen = buflen - cnt; + *offset += sglen; + } else { + + /* Transfer continues to next s-g entry */ + *offset = 0; + sg = sg_next(sg); + } + + /* Transfer the data for all the pages in this + * s-g entry. For each page: call kmap(), do the + * transfer, and call kunmap() immediately after. */ + while (sglen > 0) { + unsigned int plen = min(sglen, (unsigned int) + PAGE_SIZE - poff); + unsigned char *ptr = kmap(page); + + if (dir == TO_XFER_BUF) + memcpy(ptr + poff, buffer + cnt, plen); + else + memcpy(buffer + cnt, ptr + poff, plen); + kunmap(page); + + /* Start at the beginning of the next page */ + poff = 0; + ++page; + cnt += plen; + sglen -= plen; } - *sgptr = sg; } + *sgptr = sg; /* Return the amount actually transferred */ return cnt; @@ -251,6 +231,6 @@ void usb_stor_set_xfer_buf(unsigned char *buffer, usb_stor_access_xfer_buf(buffer, buflen, srb, &sg, &offset, TO_XFER_BUF); - if (buflen < srb->request_bufflen) - srb->resid = srb->request_bufflen - buflen; + if (buflen < scsi_bufflen(srb)) + scsi_set_resid(srb, scsi_bufflen(srb) - buflen); } -- cgit v1.2.3-59-g8ed1b From 41c2497b188a641c542328d08a45cf3214d453bd Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 9 Sep 2007 20:47:26 +0300 Subject: [SCSI] usb: freecom & sddr09 - convert to accessors and !use_sg cleanup - Use scsi data accessors and remove of !use_sg code path - This patch is dependent on cleanup patch to usb transport.c/h Signed-off-by: Boaz Harrosh Acked-by: Matthew Dharm Signed-off-by: James Bottomley --- drivers/usb/storage/freecom.c | 14 ++++++-------- drivers/usb/storage/sddr09.c | 9 +++------ 2 files changed, 9 insertions(+), 14 deletions(-) diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c index 88aa59ab7563..f5a4e8d6a3b1 100644 --- a/drivers/usb/storage/freecom.c +++ b/drivers/usb/storage/freecom.c @@ -132,8 +132,7 @@ freecom_readdata (struct scsi_cmnd *srb, struct us_data *us, /* Now transfer all of our blocks. */ US_DEBUGP("Start of read\n"); - result = usb_stor_bulk_transfer_sg(us, ipipe, srb->request_buffer, - count, srb->use_sg, &srb->resid); + result = usb_stor_bulk_srb(us, ipipe, srb); US_DEBUGP("freecom_readdata done!\n"); if (result > USB_STOR_XFER_SHORT) @@ -166,8 +165,7 @@ freecom_writedata (struct scsi_cmnd *srb, struct us_data *us, /* Now transfer all of our blocks. */ US_DEBUGP("Start of write\n"); - result = usb_stor_bulk_transfer_sg(us, opipe, srb->request_buffer, - count, srb->use_sg, &srb->resid); + result = usb_stor_bulk_srb(us, opipe, srb); US_DEBUGP("freecom_writedata done!\n"); if (result > USB_STOR_XFER_SHORT) @@ -281,7 +279,7 @@ int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) * and such will hang. */ US_DEBUGP("Device indicates that it has %d bytes available\n", le16_to_cpu (fst->Count)); - US_DEBUGP("SCSI requested %d\n", srb->request_bufflen); + US_DEBUGP("SCSI requested %d\n", scsi_bufflen(srb)); /* Find the length we desire to read. */ switch (srb->cmnd[0]) { @@ -292,12 +290,12 @@ int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) length = le16_to_cpu(fst->Count); break; default: - length = srb->request_bufflen; + length = scsi_bufflen(srb); } /* verify that this amount is legal */ - if (length > srb->request_bufflen) { - length = srb->request_bufflen; + if (length > scsi_bufflen(srb)) { + length = scsi_bufflen(srb); US_DEBUGP("Truncating request to match buffer length: %d\n", length); } diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c index b12202c5da2d..8972b17da843 100644 --- a/drivers/usb/storage/sddr09.c +++ b/drivers/usb/storage/sddr09.c @@ -1623,7 +1623,7 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) return USB_STOR_TRANSPORT_ERROR; } - if (srb->request_bufflen == 0) + if (scsi_bufflen(srb) == 0) return USB_STOR_TRANSPORT_GOOD; if (srb->sc_data_direction == DMA_TO_DEVICE || @@ -1634,12 +1634,9 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) US_DEBUGP("SDDR09: %s %d bytes\n", (srb->sc_data_direction == DMA_TO_DEVICE) ? "sending" : "receiving", - srb->request_bufflen); + scsi_bufflen(srb)); - result = usb_stor_bulk_transfer_sg(us, pipe, - srb->request_buffer, - srb->request_bufflen, - srb->use_sg, &srb->resid); + result = usb_stor_bulk_srb(us, pipe, srb); return (result == USB_STOR_XFER_GOOD ? USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR); -- cgit v1.2.3-59-g8ed1b From 4776e99ebb171d61c7e242db437358183f27b471 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 9 Sep 2007 20:40:56 +0300 Subject: [SCSI] usb: shuttle_usbat - convert to accessors and !use_sg code path removal - functions that received char* but where passed scatterlist* mostly were changed to receive void* - Use scsi data accessors and remove of !use_sg code path Signed-off-by: Boaz Harrosh Acked-by: Matthew Dharm Signed-off-by: James Bottomley --- drivers/usb/storage/shuttle_usbat.c | 68 ++++++++++++++----------------------- 1 file changed, 26 insertions(+), 42 deletions(-) diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c index cb22a9ad1694..570c1250f6f3 100644 --- a/drivers/usb/storage/shuttle_usbat.c +++ b/drivers/usb/storage/shuttle_usbat.c @@ -130,7 +130,7 @@ static int usbat_write(struct us_data *us, * Convenience function to perform a bulk read */ static int usbat_bulk_read(struct us_data *us, - unsigned char *data, + void* buf, unsigned int len, int use_sg) { @@ -138,14 +138,14 @@ static int usbat_bulk_read(struct us_data *us, return USB_STOR_XFER_GOOD; US_DEBUGP("usbat_bulk_read: len = %d\n", len); - return usb_stor_bulk_transfer_sg(us, us->recv_bulk_pipe, data, len, use_sg, NULL); + return usb_stor_bulk_transfer_sg(us, us->recv_bulk_pipe, buf, len, use_sg, NULL); } /* * Convenience function to perform a bulk write */ static int usbat_bulk_write(struct us_data *us, - unsigned char *data, + void* buf, unsigned int len, int use_sg) { @@ -153,7 +153,7 @@ static int usbat_bulk_write(struct us_data *us, return USB_STOR_XFER_GOOD; US_DEBUGP("usbat_bulk_write: len = %d\n", len); - return usb_stor_bulk_transfer_sg(us, us->send_bulk_pipe, data, len, use_sg, NULL); + return usb_stor_bulk_transfer_sg(us, us->send_bulk_pipe, buf, len, use_sg, NULL); } /* @@ -314,7 +314,7 @@ static int usbat_wait_not_busy(struct us_data *us, int minutes) * Read block data from the data register */ static int usbat_read_block(struct us_data *us, - unsigned char *content, + void* buf, unsigned short len, int use_sg) { @@ -337,7 +337,7 @@ static int usbat_read_block(struct us_data *us, if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - result = usbat_bulk_read(us, content, len, use_sg); + result = usbat_bulk_read(us, buf, len, use_sg); return (result == USB_STOR_XFER_GOOD ? USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR); } @@ -347,7 +347,7 @@ static int usbat_read_block(struct us_data *us, */ static int usbat_write_block(struct us_data *us, unsigned char access, - unsigned char *content, + void* buf, unsigned short len, int minutes, int use_sg) @@ -372,7 +372,7 @@ static int usbat_write_block(struct us_data *us, if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; - result = usbat_bulk_write(us, content, len, use_sg); + result = usbat_bulk_write(us, buf, len, use_sg); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; @@ -392,7 +392,7 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us, unsigned char timeout, unsigned char qualifier, int direction, - unsigned char *content, + void *buf, unsigned short len, int use_sg, int minutes) @@ -472,7 +472,7 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us, } result = usb_stor_bulk_transfer_sg(us, - pipe, content, len, use_sg, NULL); + pipe, buf, len, use_sg, NULL); /* * If we get a stall on the bulk download, we'll retry @@ -606,7 +606,7 @@ static int usbat_multiple_write(struct us_data *us, * other related details) are defined beforehand with _set_shuttle_features(). */ static int usbat_read_blocks(struct us_data *us, - unsigned char *buffer, + void* buffer, int len, int use_sg) { @@ -648,7 +648,7 @@ static int usbat_read_blocks(struct us_data *us, * other related details) are defined beforehand with _set_shuttle_features(). */ static int usbat_write_blocks(struct us_data *us, - unsigned char *buffer, + void* buffer, int len, int use_sg) { @@ -1170,15 +1170,15 @@ static int usbat_hp8200e_handle_read10(struct us_data *us, US_DEBUGP("handle_read10: transfersize %d\n", srb->transfersize); - if (srb->request_bufflen < 0x10000) { + if (scsi_bufflen(srb) < 0x10000) { result = usbat_hp8200e_rw_block_test(us, USBAT_ATA, registers, data, 19, USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD, (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ), DMA_FROM_DEVICE, - srb->request_buffer, - srb->request_bufflen, srb->use_sg, 1); + scsi_sglist(srb), + scsi_bufflen(srb), scsi_sg_count(srb), 1); return result; } @@ -1196,7 +1196,7 @@ static int usbat_hp8200e_handle_read10(struct us_data *us, len <<= 16; len |= data[7+7]; US_DEBUGP("handle_read10: GPCMD_READ_CD: len %d\n", len); - srb->transfersize = srb->request_bufflen/len; + srb->transfersize = scsi_bufflen(srb)/len; } if (!srb->transfersize) { @@ -1213,7 +1213,7 @@ static int usbat_hp8200e_handle_read10(struct us_data *us, len = (65535/srb->transfersize) * srb->transfersize; US_DEBUGP("Max read is %d bytes\n", len); - len = min(len, srb->request_bufflen); + len = min(len, scsi_bufflen(srb)); buffer = kmalloc(len, GFP_NOIO); if (buffer == NULL) /* bloody hell! */ return USB_STOR_TRANSPORT_FAILED; @@ -1222,10 +1222,10 @@ static int usbat_hp8200e_handle_read10(struct us_data *us, sector |= short_pack(data[7+5], data[7+4]); transferred = 0; - while (transferred != srb->request_bufflen) { + while (transferred != scsi_bufflen(srb)) { - if (len > srb->request_bufflen - transferred) - len = srb->request_bufflen - transferred; + if (len > scsi_bufflen(srb) - transferred) + len = scsi_bufflen(srb) - transferred; data[3] = len&0xFF; /* (cylL) = expected length (L) */ data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */ @@ -1261,7 +1261,7 @@ static int usbat_hp8200e_handle_read10(struct us_data *us, transferred += len; sector += len / srb->transfersize; - } /* while transferred != srb->request_bufflen */ + } /* while transferred != scsi_bufflen(srb) */ kfree(buffer); return result; @@ -1429,9 +1429,8 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) unsigned char data[32]; unsigned int len; int i; - char string[64]; - len = srb->request_bufflen; + len = scsi_bufflen(srb); /* Send A0 (ATA PACKET COMMAND). Note: I guess we're never going to get any of the ATA @@ -1472,8 +1471,8 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD, (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ), DMA_TO_DEVICE, - srb->request_buffer, - len, srb->use_sg, 10); + scsi_sglist(srb), + len, scsi_sg_count(srb), 10); if (result == USB_STOR_TRANSPORT_GOOD) { transferred += len; @@ -1540,23 +1539,8 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us) len = *status; - result = usbat_read_block(us, srb->request_buffer, len, srb->use_sg); - - /* Debug-print the first 32 bytes of the transfer */ - - if (!srb->use_sg) { - string[0] = 0; - for (i=0; irequest_buffer)[i]); - if ((i%16)==15) { - US_DEBUGP("%s\n", string); - string[0] = 0; - } - } - if (string[0]!=0) - US_DEBUGP("%s\n", string); - } + result = usbat_read_block(us, scsi_sglist(srb), len, + scsi_sg_count(srb)); } return result; -- cgit v1.2.3-59-g8ed1b From 6d416e6173394defda5933e419e805b696681b7e Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Mon, 10 Sep 2007 18:01:08 +0300 Subject: [SCSI] usb: transport - convert to accessors and !use_sg code path removal - This patch depends on: usb: transport.c use scsi_eh API in REQUEST_SENSE execution - Use scsi data accessors and remove of !use_sg code path. - New usb_stor_bulk_srb() for use by drivers [jejb: updated with corrective fix. had a bug in residual handling in the new usb_stor_bulk_srb() function. Found by Gabriel C. in -mm tree. Tested-by: Gabriel C ] Signed-off-by: Boaz Harrosh Acked-by: Matthew Dharm Signed-off-by: James Bottomley --- drivers/usb/storage/transport.c | 45 +++++++++++++++++++++++++---------------- drivers/usb/storage/transport.h | 2 ++ 2 files changed, 30 insertions(+), 17 deletions(-) diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index c646750ccc30..d9f4912f873d 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -458,6 +458,22 @@ static int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe, us->current_sg.bytes); } +/* + * Common used function. Transfer a complete command + * via usb_stor_bulk_transfer_sglist() above. Set cmnd resid + */ +int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe, + struct scsi_cmnd* srb) +{ + unsigned int partial; + int result = usb_stor_bulk_transfer_sglist(us, pipe, scsi_sglist(srb), + scsi_sg_count(srb), scsi_bufflen(srb), + &partial); + + scsi_set_resid(srb, scsi_bufflen(srb) - partial); + return result; +} + /* * Transfer an entire SCSI command's worth of data payload over the bulk * pipe. @@ -508,7 +524,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) int result; /* send the command to the transport layer */ - srb->resid = 0; + scsi_set_resid(srb, 0); result = us->transport(srb, us); /* if the command gets aborted by the higher layers, we need to @@ -568,7 +584,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) * A short transfer on a command where we don't expect it * is unusual, but it doesn't mean we need to auto-sense. */ - if ((srb->resid > 0) && + if ((scsi_get_resid(srb) > 0) && !((srb->cmnd[0] == REQUEST_SENSE) || (srb->cmnd[0] == INQUIRY) || (srb->cmnd[0] == MODE_SENSE) || @@ -593,7 +609,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) srb->cmd_len = 12; /* issue the auto-sense command */ - srb->resid = 0; + scsi_set_resid(srb, 0); temp_result = us->transport(us->srb, us); /* let's clean up right away */ @@ -649,7 +665,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us) /* Did we transfer less than the minimum amount required? */ if (srb->result == SAM_STAT_GOOD && - srb->request_bufflen - srb->resid < srb->underflow) + scsi_bufflen(srb) - scsi_get_resid(srb) < srb->underflow) srb->result = (DID_ERROR << 16) | (SUGGEST_RETRY << 24); return; @@ -708,7 +724,7 @@ void usb_stor_stop_transport(struct us_data *us) int usb_stor_CBI_transport(struct scsi_cmnd *srb, struct us_data *us) { - unsigned int transfer_length = srb->request_bufflen; + unsigned int transfer_length = scsi_bufflen(srb); unsigned int pipe = 0; int result; @@ -737,9 +753,7 @@ int usb_stor_CBI_transport(struct scsi_cmnd *srb, struct us_data *us) if (transfer_length) { pipe = srb->sc_data_direction == DMA_FROM_DEVICE ? us->recv_bulk_pipe : us->send_bulk_pipe; - result = usb_stor_bulk_transfer_sg(us, pipe, - srb->request_buffer, transfer_length, - srb->use_sg, &srb->resid); + result = usb_stor_bulk_srb(us, pipe, srb); US_DEBUGP("CBI data stage result is 0x%x\n", result); /* if we stalled the data transfer it means command failed */ @@ -808,7 +822,7 @@ int usb_stor_CBI_transport(struct scsi_cmnd *srb, struct us_data *us) */ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us) { - unsigned int transfer_length = srb->request_bufflen; + unsigned int transfer_length = scsi_bufflen(srb); int result; /* COMMAND STAGE */ @@ -836,9 +850,7 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us) if (transfer_length) { unsigned int pipe = srb->sc_data_direction == DMA_FROM_DEVICE ? us->recv_bulk_pipe : us->send_bulk_pipe; - result = usb_stor_bulk_transfer_sg(us, pipe, - srb->request_buffer, transfer_length, - srb->use_sg, &srb->resid); + result = usb_stor_bulk_srb(us, pipe, srb); US_DEBUGP("CB data stage result is 0x%x\n", result); /* if we stalled the data transfer it means command failed */ @@ -904,7 +916,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) { struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf; - unsigned int transfer_length = srb->request_bufflen; + unsigned int transfer_length = scsi_bufflen(srb); unsigned int residue; int result; int fake_sense = 0; @@ -955,9 +967,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) if (transfer_length) { unsigned int pipe = srb->sc_data_direction == DMA_FROM_DEVICE ? us->recv_bulk_pipe : us->send_bulk_pipe; - result = usb_stor_bulk_transfer_sg(us, pipe, - srb->request_buffer, transfer_length, - srb->use_sg, &srb->resid); + result = usb_stor_bulk_srb(us, pipe, srb); US_DEBUGP("Bulk data transfer result 0x%x\n", result); if (result == USB_STOR_XFER_ERROR) return USB_STOR_TRANSPORT_ERROR; @@ -1036,7 +1046,8 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) if (residue) { if (!(us->flags & US_FL_IGNORE_RESIDUE)) { residue = min(residue, transfer_length); - srb->resid = max(srb->resid, (int) residue); + scsi_set_resid(srb, max(scsi_get_resid(srb), + (int) residue)); } } diff --git a/drivers/usb/storage/transport.h b/drivers/usb/storage/transport.h index 633a715850a4..ada7c2f43f84 100644 --- a/drivers/usb/storage/transport.h +++ b/drivers/usb/storage/transport.h @@ -139,6 +139,8 @@ extern int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe, void *buf, unsigned int length, unsigned int *act_len); extern int usb_stor_bulk_transfer_sg(struct us_data *us, unsigned int pipe, void *buf, unsigned int length, int use_sg, int *residual); +extern int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe, + struct scsi_cmnd* srb); extern int usb_stor_port_reset(struct us_data *us); #endif -- cgit v1.2.3-59-g8ed1b From 48c23d3e377bb090bf49ea6c45d024b4c11439b0 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Wed, 22 Aug 2007 19:10:45 +0300 Subject: [SCSI] isd200: use one-element sg list in issuing commands - This patch should be commited before: usb: transport - convert to accessors and !use_sg code path removal - isd200_action() was still using direct liniar pointers in issuing commands to the USB transport level. This is no longer supported, use one-element scatterlist instead. - Adjustment of command's length in the case of scsi-to-ata translation is now restored before return to queuecommand, since other wise it can leak BIOs. - isd200_action() return Error on unknown requests. Used to print an error but still try to send garbage cdb. - convert few places to scsi data accessors. - Todo: This file will need to be changed when scsi_cmnd changes to scsi_data_buffer or any other solution. Signed-off-by: Boaz Harrosh Acked-by: Matthew Dharm Signed-off-by: James Bottomley --- drivers/usb/storage/isd200.c | 66 ++++++++++++++++++++++++++++++-------------- 1 file changed, 46 insertions(+), 20 deletions(-) diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c index 49ba6c0ff1e8..178e8c2a8a2f 100644 --- a/drivers/usb/storage/isd200.c +++ b/drivers/usb/storage/isd200.c @@ -49,6 +49,7 @@ #include #include #include +#include #include #include @@ -287,6 +288,7 @@ struct isd200_info { /* maximum number of LUNs supported */ unsigned char MaxLUNs; struct scsi_cmnd srb; + struct scatterlist sg; }; @@ -398,6 +400,31 @@ static void isd200_build_sense(struct us_data *us, struct scsi_cmnd *srb) * Transport routines ***********************************************************************/ +/************************************************************************** + * isd200_set_srb(), isd200_srb_set_bufflen() + * + * Two helpers to facilitate in initialization of scsi_cmnd structure + * Will need to change when struct scsi_cmnd changes + */ +static void isd200_set_srb(struct isd200_info *info, + enum dma_data_direction dir, void* buff, unsigned bufflen) +{ + struct scsi_cmnd *srb = &info->srb; + + if (buff) + sg_init_one(&info->sg, buff, bufflen); + + srb->sc_data_direction = dir; + srb->request_buffer = buff ? &info->sg : NULL; + srb->request_bufflen = bufflen; + srb->use_sg = buff ? 1 : 0; +} + +static void isd200_srb_set_bufflen(struct scsi_cmnd *srb, unsigned bufflen) +{ + srb->request_bufflen = bufflen; +} + /************************************************************************** * isd200_action @@ -432,9 +459,7 @@ static int isd200_action( struct us_data *us, int action, ata.generic.RegisterSelect = REG_CYLINDER_LOW | REG_CYLINDER_HIGH | REG_STATUS | REG_ERROR; - srb->sc_data_direction = DMA_FROM_DEVICE; - srb->request_buffer = pointer; - srb->request_bufflen = value; + isd200_set_srb(info, DMA_FROM_DEVICE, pointer, value); break; case ACTION_ENUM: @@ -444,7 +469,7 @@ static int isd200_action( struct us_data *us, int action, ACTION_SELECT_5; ata.generic.RegisterSelect = REG_DEVICE_HEAD; ata.write.DeviceHeadByte = value; - srb->sc_data_direction = DMA_NONE; + isd200_set_srb(info, DMA_NONE, NULL, 0); break; case ACTION_RESET: @@ -453,7 +478,7 @@ static int isd200_action( struct us_data *us, int action, ACTION_SELECT_3|ACTION_SELECT_4; ata.generic.RegisterSelect = REG_DEVICE_CONTROL; ata.write.DeviceControlByte = ATA_DC_RESET_CONTROLLER; - srb->sc_data_direction = DMA_NONE; + isd200_set_srb(info, DMA_NONE, NULL, 0); break; case ACTION_REENABLE: @@ -462,7 +487,7 @@ static int isd200_action( struct us_data *us, int action, ACTION_SELECT_3|ACTION_SELECT_4; ata.generic.RegisterSelect = REG_DEVICE_CONTROL; ata.write.DeviceControlByte = ATA_DC_REENABLE_CONTROLLER; - srb->sc_data_direction = DMA_NONE; + isd200_set_srb(info, DMA_NONE, NULL, 0); break; case ACTION_SOFT_RESET: @@ -471,21 +496,20 @@ static int isd200_action( struct us_data *us, int action, ata.generic.RegisterSelect = REG_DEVICE_HEAD | REG_COMMAND; ata.write.DeviceHeadByte = info->DeviceHead; ata.write.CommandByte = WIN_SRST; - srb->sc_data_direction = DMA_NONE; + isd200_set_srb(info, DMA_NONE, NULL, 0); break; case ACTION_IDENTIFY: US_DEBUGP(" isd200_action(IDENTIFY)\n"); ata.generic.RegisterSelect = REG_COMMAND; ata.write.CommandByte = WIN_IDENTIFY; - srb->sc_data_direction = DMA_FROM_DEVICE; - srb->request_buffer = (void *) info->id; - srb->request_bufflen = sizeof(struct hd_driveid); + isd200_set_srb(info, DMA_FROM_DEVICE, info->id, + sizeof(struct hd_driveid)); break; default: US_DEBUGP("Error: Undefined action %d\n",action); - break; + return ISD200_ERROR; } memcpy(srb->cmnd, &ata, sizeof(ata.generic)); @@ -590,7 +614,7 @@ static void isd200_invoke_transport( struct us_data *us, return; } - if ((srb->resid > 0) && + if ((scsi_get_resid(srb) > 0) && !((srb->cmnd[0] == REQUEST_SENSE) || (srb->cmnd[0] == INQUIRY) || (srb->cmnd[0] == MODE_SENSE) || @@ -1217,7 +1241,6 @@ static int isd200_get_inquiry_data( struct us_data *us ) return(retStatus); } - /************************************************************************** * isd200_scsi_to_ata * @@ -1266,7 +1289,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, ataCdb->generic.TransferBlockSize = 1; ataCdb->generic.RegisterSelect = REG_COMMAND; ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS; - srb->request_bufflen = 0; + isd200_srb_set_bufflen(srb, 0); } else { US_DEBUGP(" Media Status not supported, just report okay\n"); srb->result = SAM_STAT_GOOD; @@ -1284,7 +1307,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, ataCdb->generic.TransferBlockSize = 1; ataCdb->generic.RegisterSelect = REG_COMMAND; ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS; - srb->request_bufflen = 0; + isd200_srb_set_bufflen(srb, 0); } else { US_DEBUGP(" Media Status not supported, just report okay\n"); srb->result = SAM_STAT_GOOD; @@ -1390,7 +1413,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, ataCdb->generic.RegisterSelect = REG_COMMAND; ataCdb->write.CommandByte = (srb->cmnd[4] & 0x1) ? WIN_DOORLOCK : WIN_DOORUNLOCK; - srb->request_bufflen = 0; + isd200_srb_set_bufflen(srb, 0); } else { US_DEBUGP(" Not removeable media, just report okay\n"); srb->result = SAM_STAT_GOOD; @@ -1416,7 +1439,7 @@ static int isd200_scsi_to_ata(struct scsi_cmnd *srb, struct us_data *us, ataCdb->generic.TransferBlockSize = 1; ataCdb->generic.RegisterSelect = REG_COMMAND; ataCdb->write.CommandByte = ATA_COMMAND_GET_MEDIA_STATUS; - srb->request_bufflen = 0; + isd200_srb_set_bufflen(srb, 0); } else { US_DEBUGP(" Nothing to do, just report okay\n"); srb->result = SAM_STAT_GOOD; @@ -1525,7 +1548,7 @@ int isd200_Initialization(struct us_data *us) void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us) { - int sendToTransport = 1; + int sendToTransport = 1, orig_bufflen; union ata_cdb ataCdb; /* Make sure driver was initialized */ @@ -1533,11 +1556,14 @@ void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us) if (us->extra == NULL) US_DEBUGP("ERROR Driver not initialized\n"); - /* Convert command */ - srb->resid = 0; + scsi_set_resid(srb, 0); + /* scsi_bufflen might change in protocol translation to ata */ + orig_bufflen = scsi_bufflen(srb); sendToTransport = isd200_scsi_to_ata(srb, us, &ataCdb); /* send the command to the transport layer */ if (sendToTransport) isd200_invoke_transport(us, srb, &ataCdb); + + isd200_srb_set_bufflen(srb, orig_bufflen); } -- cgit v1.2.3-59-g8ed1b From c73961e563dde3239e2e5da08b25ab2832b2e840 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Fri, 7 Sep 2007 06:50:20 +0900 Subject: [SCSI] scsi_debug: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Signed-off-by: Boaz Harrosh Acked-by: Douglas Gilbert Signed-off-by: James Bottomley --- drivers/scsi/scsi_debug.c | 37 ++++++++++--------------------------- 1 file changed, 10 insertions(+), 27 deletions(-) diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index 46cae5a212de..82c06f0a9d02 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -329,7 +329,7 @@ int scsi_debug_queuecommand(struct scsi_cmnd * SCpnt, done_funct_t done) if (done == NULL) return 0; /* assume mid level reprocessing command */ - SCpnt->resid = 0; + scsi_set_resid(SCpnt, 0); if ((SCSI_DEBUG_OPT_NOISE & scsi_debug_opts) && cmd) { printk(KERN_INFO "scsi_debug: cmd "); for (k = 0, len = SCpnt->cmd_len; k < len; ++k) @@ -603,26 +603,16 @@ static int fill_from_dev_buffer(struct scsi_cmnd * scp, unsigned char * arr, void * kaddr_off; struct scatterlist * sg; - if (0 == scp->request_bufflen) + if (0 == scsi_bufflen(scp)) return 0; - if (NULL == scp->request_buffer) + if (NULL == scsi_sglist(scp)) return (DID_ERROR << 16); if (! ((scp->sc_data_direction == DMA_BIDIRECTIONAL) || (scp->sc_data_direction == DMA_FROM_DEVICE))) return (DID_ERROR << 16); - if (0 == scp->use_sg) { - req_len = scp->request_bufflen; - act_len = (req_len < arr_len) ? req_len : arr_len; - memcpy(scp->request_buffer, arr, act_len); - if (scp->resid) - scp->resid -= act_len; - else - scp->resid = req_len - act_len; - return 0; - } active = 1; req_len = act_len = 0; - scsi_for_each_sg(scp, sg, scp->use_sg, k) { + scsi_for_each_sg(scp, sg, scsi_sg_count(scp), k) { if (active) { kaddr = (unsigned char *) kmap_atomic(sg_page(sg), KM_USER0); @@ -640,10 +630,10 @@ static int fill_from_dev_buffer(struct scsi_cmnd * scp, unsigned char * arr, } req_len += sg->length; } - if (scp->resid) - scp->resid -= act_len; + if (scsi_get_resid(scp)) + scsi_set_resid(scp, scsi_get_resid(scp) - act_len); else - scp->resid = req_len - act_len; + scsi_set_resid(scp, req_len - act_len); return 0; } @@ -656,22 +646,15 @@ static int fetch_to_dev_buffer(struct scsi_cmnd * scp, unsigned char * arr, void * kaddr_off; struct scatterlist * sg; - if (0 == scp->request_bufflen) + if (0 == scsi_bufflen(scp)) return 0; - if (NULL == scp->request_buffer) + if (NULL == scsi_sglist(scp)) return -1; if (! ((scp->sc_data_direction == DMA_BIDIRECTIONAL) || (scp->sc_data_direction == DMA_TO_DEVICE))) return -1; - if (0 == scp->use_sg) { - req_len = scp->request_bufflen; - len = (req_len < max_arr_len) ? req_len : max_arr_len; - memcpy(arr, scp->request_buffer, len); - return len; - } - sg = scsi_sglist(scp); req_len = fin = 0; - for (k = 0; k < scp->use_sg; ++k, sg = sg_next(sg)) { + scsi_for_each_sg(scp, sg, scsi_sg_count(scp), k) { kaddr = (unsigned char *)kmap_atomic(sg_page(sg), KM_USER0); if (NULL == kaddr) return -1; -- cgit v1.2.3-59-g8ed1b From fe7ed98fd49a28287aca8b0ba8da8fb9ca35a055 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 9 Sep 2007 21:06:23 +0300 Subject: [SCSI] atp870u: convert to accessors and !use_sg cleanup - convert to accessors and !use_sg cleanup - Probably not ready for sg-chaining Signed-off-by: Boaz Harrosh Acked-by: Christoph Hellwig Cc: jameshsu Signed-off-by: James Bottomley --- drivers/scsi/atp870u.c | 102 +++++++++---------------------------------------- 1 file changed, 17 insertions(+), 85 deletions(-) diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c index fec58cc47f1c..db6de5e6afb3 100644 --- a/drivers/scsi/atp870u.c +++ b/drivers/scsi/atp870u.c @@ -471,18 +471,8 @@ go_42: /* * Complete the command */ - if (workreq->use_sg) { - pci_unmap_sg(dev->pdev, - (struct scatterlist *)workreq->request_buffer, - workreq->use_sg, - workreq->sc_data_direction); - } else if (workreq->request_bufflen && - workreq->sc_data_direction != DMA_NONE) { - pci_unmap_single(dev->pdev, - workreq->SCp.dma_handle, - workreq->request_bufflen, - workreq->sc_data_direction); - } + scsi_dma_unmap(workreq); + spin_lock_irqsave(dev->host->host_lock, flags); (*workreq->scsi_done) (workreq); #ifdef ED_DBGP @@ -624,7 +614,7 @@ static int atp870u_queuecommand(struct scsi_cmnd * req_p, c = scmd_channel(req_p); req_p->sense_buffer[0]=0; - req_p->resid = 0; + scsi_set_resid(req_p, 0); if (scmd_channel(req_p) > 1) { req_p->result = 0x00040000; done(req_p); @@ -722,7 +712,6 @@ static void send_s870(struct atp_unit *dev,unsigned char c) unsigned short int tmpcip, w; unsigned long l, bttl = 0; unsigned int workport; - struct scatterlist *sgpnt; unsigned long sg_count; if (dev->in_snd[c] != 0) { @@ -793,6 +782,8 @@ oktosend: } printk("\n"); #endif + l = scsi_bufflen(workreq); + if (dev->dev_id == ATP885_DEVID) { j = inb(dev->baseport + 0x29) & 0xfe; outb(j, dev->baseport + 0x29); @@ -800,12 +791,11 @@ oktosend: } if (workreq->cmnd[0] == READ_CAPACITY) { - if (workreq->request_bufflen > 8) { - workreq->request_bufflen = 0x08; - } + if (l > 8) + l = 8; } if (workreq->cmnd[0] == 0x00) { - workreq->request_bufflen = 0; + l = 0; } tmport = workport + 0x1b; @@ -852,40 +842,8 @@ oktosend: #ifdef ED_DBGP printk("dev->id[%d][%d].devsp = %2x\n",c,target_id,dev->id[c][target_id].devsp); #endif - /* - * Figure out the transfer size - */ - if (workreq->use_sg) { -#ifdef ED_DBGP - printk("Using SGL\n"); -#endif - l = 0; - - sgpnt = (struct scatterlist *) workreq->request_buffer; - sg_count = pci_map_sg(dev->pdev, sgpnt, workreq->use_sg, - workreq->sc_data_direction); - - for (i = 0; i < workreq->use_sg; i++) { - if (sgpnt[i].length == 0 || workreq->use_sg > ATP870U_SCATTER) { - panic("Foooooooood fight!"); - } - l += sgpnt[i].length; - } -#ifdef ED_DBGP - printk( "send_s870: workreq->use_sg %d, sg_count %d l %8ld\n", workreq->use_sg, sg_count, l); -#endif - } else if(workreq->request_bufflen && workreq->sc_data_direction != PCI_DMA_NONE) { -#ifdef ED_DBGP - printk("Not using SGL\n"); -#endif - workreq->SCp.dma_handle = pci_map_single(dev->pdev, workreq->request_buffer, - workreq->request_bufflen, - workreq->sc_data_direction); - l = workreq->request_bufflen; -#ifdef ED_DBGP - printk( "send_s870: workreq->use_sg %d, l %8ld\n", workreq->use_sg, l); -#endif - } else l = 0; + + sg_count = scsi_dma_map(workreq); /* * Write transfer size */ @@ -938,16 +896,16 @@ oktosend: * a linear chain. */ - if (workreq->use_sg) { - sgpnt = (struct scatterlist *) workreq->request_buffer; + if (l) { + struct scatterlist *sgpnt; i = 0; - for (j = 0; j < workreq->use_sg; j++) { - bttl = sg_dma_address(&sgpnt[j]); - l=sg_dma_len(&sgpnt[j]); + scsi_for_each_sg(workreq, sgpnt, sg_count, j) { + bttl = sg_dma_address(sgpnt); + l=sg_dma_len(sgpnt); #ifdef ED_DBGP - printk("1. bttl %x, l %x\n",bttl, l); + printk("1. bttl %x, l %x\n",bttl, l); #endif - while (l > 0x10000) { + while (l > 0x10000) { (((u16 *) (prd))[i + 3]) = 0x0000; (((u16 *) (prd))[i + 2]) = 0x0000; (((u32 *) (prd))[i >> 1]) = cpu_to_le32(bttl); @@ -965,32 +923,6 @@ oktosend: printk("prd %4x %4x %4x %4x\n",(((unsigned short int *)prd)[0]),(((unsigned short int *)prd)[1]),(((unsigned short int *)prd)[2]),(((unsigned short int *)prd)[3])); printk("2. bttl %x, l %x\n",bttl, l); #endif - } else { - /* - * For a linear request write a chain of blocks - */ - bttl = workreq->SCp.dma_handle; - l = workreq->request_bufflen; - i = 0; -#ifdef ED_DBGP - printk("3. bttl %x, l %x\n",bttl, l); -#endif - while (l > 0x10000) { - (((u16 *) (prd))[i + 3]) = 0x0000; - (((u16 *) (prd))[i + 2]) = 0x0000; - (((u32 *) (prd))[i >> 1]) = cpu_to_le32(bttl); - l -= 0x10000; - bttl += 0x10000; - i += 0x04; - } - (((u16 *) (prd))[i + 3]) = cpu_to_le16(0x8000); - (((u16 *) (prd))[i + 2]) = cpu_to_le16(l); - (((u32 *) (prd))[i >> 1]) = cpu_to_le32(bttl); -#ifdef ED_DBGP - printk("prd %4x %4x %4x %4x\n",(((unsigned short int *)prd)[0]),(((unsigned short int *)prd)[1]),(((unsigned short int *)prd)[2]),(((unsigned short int *)prd)[3])); - printk("4. bttl %x, l %x\n",bttl, l); -#endif - } tmpcip += 4; #ifdef ED_DBGP -- cgit v1.2.3-59-g8ed1b From 9a3dd65bafcfa3338cfb4b6b7e12ff59aca0ac28 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Mon, 5 Nov 2007 11:21:40 +0200 Subject: [SCSI] wd7000: proper fix for boards without sg support - code used to set sg_tablesize to zero for board revision less than 6. This is no longer supported, therefore I use sg_tablesize=1 and open code the sg handling for that case. - Get rid of use of SG_NONE which will be removed soon. Signed-off-by: Boaz Harrosh Signed-off-by: James Signed-off-by: James Bottomley --- drivers/scsi/wd7000.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/wd7000.c b/drivers/scsi/wd7000.c index 03cd44f231df..b4304ae78527 100644 --- a/drivers/scsi/wd7000.c +++ b/drivers/scsi/wd7000.c @@ -1108,13 +1108,10 @@ static int wd7000_queuecommand(struct scsi_cmnd *SCpnt, scb->host = host; nseg = scsi_sg_count(SCpnt); - if (nseg) { + if (nseg > 1) { struct scatterlist *sg; unsigned i; - if (SCpnt->device->host->sg_tablesize == SG_NONE) { - panic("wd7000_queuecommand: scatter/gather not supported.\n"); - } dprintk("Using scatter/gather with %d elements.\n", nseg); sgb = scb->sgb; @@ -1128,7 +1125,10 @@ static int wd7000_queuecommand(struct scsi_cmnd *SCpnt, } } else { scb->op = 0; - any2scsi(scb->dataptr, isa_virt_to_bus(scsi_sglist(SCpnt))); + if (nseg) { + struct scatterlist *sg = scsi_sglist(SCpnt); + any2scsi(scb->dataptr, isa_page_to_bus(sg_page(sg)) + sg->offset); + } any2scsi(scb->maxlen, scsi_bufflen(SCpnt)); } @@ -1524,7 +1524,7 @@ static __init int wd7000_detect(struct scsi_host_template *tpnt) * For boards before rev 6.0, scatter/gather isn't supported. */ if (host->rev1 < 6) - sh->sg_tablesize = SG_NONE; + sh->sg_tablesize = 1; present++; /* count it */ -- cgit v1.2.3-59-g8ed1b From 9e0fe44ddb9ed037188ac711af1e981ac32d3c32 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Mon, 5 Nov 2007 11:23:35 +0200 Subject: [SCSI] NCR5380 family: convert to accessors & !use_sg cleanup - This patch depends on: NCR5380: Use scsi_eh API for REQUEST_SENSE invocation - convert to accessors and !use_sg cleanup - FIXME: Not sg-chain ready look for ++cmd->SCp.buffer Signed-off-by: Boaz Harrosh Signed-off-by: James Signed-off-by: James Bottomley --- drivers/scsi/NCR5380.c | 14 +++++++------- drivers/scsi/atari_NCR5380.c | 22 +++++++++++----------- drivers/scsi/sun3_NCR5380.c | 22 +++++++++++----------- 3 files changed, 29 insertions(+), 29 deletions(-) diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c index 2597209183d0..1e9f82884f70 100644 --- a/drivers/scsi/NCR5380.c +++ b/drivers/scsi/NCR5380.c @@ -295,16 +295,16 @@ static __inline__ void initialize_SCp(Scsi_Cmnd * cmd) * various queues are valid. */ - if (cmd->use_sg) { - cmd->SCp.buffer = (struct scatterlist *) cmd->request_buffer; - cmd->SCp.buffers_residual = cmd->use_sg - 1; + if (scsi_bufflen(cmd)) { + cmd->SCp.buffer = scsi_sglist(cmd); + cmd->SCp.buffers_residual = scsi_sg_count(cmd) - 1; cmd->SCp.ptr = sg_virt(cmd->SCp.buffer); cmd->SCp.this_residual = cmd->SCp.buffer->length; } else { cmd->SCp.buffer = NULL; cmd->SCp.buffers_residual = 0; - cmd->SCp.ptr = (char *) cmd->request_buffer; - cmd->SCp.this_residual = cmd->request_bufflen; + cmd->SCp.ptr = NULL; + cmd->SCp.this_residual = 0; } } @@ -975,14 +975,14 @@ static int NCR5380_queue_command(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *)) case WRITE_6: case WRITE_10: hostdata->time_write[cmd->device->id] -= (jiffies - hostdata->timebase); - hostdata->bytes_write[cmd->device->id] += cmd->request_bufflen; + hostdata->bytes_write[cmd->device->id] += scsi_bufflen(cmd); hostdata->pendingw++; break; case READ: case READ_6: case READ_10: hostdata->time_read[cmd->device->id] -= (jiffies - hostdata->timebase); - hostdata->bytes_read[cmd->device->id] += cmd->request_bufflen; + hostdata->bytes_read[cmd->device->id] += scsi_bufflen(cmd); hostdata->pendingr++; break; } diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c index a9680b5e8ac6..d2ca3fa4fcf5 100644 --- a/drivers/scsi/atari_NCR5380.c +++ b/drivers/scsi/atari_NCR5380.c @@ -511,9 +511,9 @@ static inline void initialize_SCp(Scsi_Cmnd *cmd) * various queues are valid. */ - if (cmd->use_sg) { - cmd->SCp.buffer = (struct scatterlist *)cmd->request_buffer; - cmd->SCp.buffers_residual = cmd->use_sg - 1; + if (scsi_bufflen(cmd)) { + cmd->SCp.buffer = scsi_sglist(cmd); + cmd->SCp.buffers_residual = scsi_sg_count(cmd) - 1; cmd->SCp.ptr = sg_virt(cmd->SCp.buffer); cmd->SCp.this_residual = cmd->SCp.buffer->length; /* ++roman: Try to merge some scatter-buffers if they are at @@ -523,8 +523,8 @@ static inline void initialize_SCp(Scsi_Cmnd *cmd) } else { cmd->SCp.buffer = NULL; cmd->SCp.buffers_residual = 0; - cmd->SCp.ptr = (char *)cmd->request_buffer; - cmd->SCp.this_residual = cmd->request_bufflen; + cmd->SCp.ptr = NULL; + cmd->SCp.this_residual = 0; } } @@ -936,21 +936,21 @@ static int NCR5380_queue_command(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *)) } # endif # ifdef NCR5380_STAT_LIMIT - if (cmd->request_bufflen > NCR5380_STAT_LIMIT) + if (scsi_bufflen(cmd) > NCR5380_STAT_LIMIT) # endif switch (cmd->cmnd[0]) { case WRITE: case WRITE_6: case WRITE_10: hostdata->time_write[cmd->device->id] -= (jiffies - hostdata->timebase); - hostdata->bytes_write[cmd->device->id] += cmd->request_bufflen; + hostdata->bytes_write[cmd->device->id] += scsi_bufflen(cmd); hostdata->pendingw++; break; case READ: case READ_6: case READ_10: hostdata->time_read[cmd->device->id] -= (jiffies - hostdata->timebase); - hostdata->bytes_read[cmd->device->id] += cmd->request_bufflen; + hostdata->bytes_read[cmd->device->id] += scsi_bufflen(cmd); hostdata->pendingr++; break; } @@ -1352,21 +1352,21 @@ static irqreturn_t NCR5380_intr(int irq, void *dev_id) static void collect_stats(struct NCR5380_hostdata* hostdata, Scsi_Cmnd *cmd) { # ifdef NCR5380_STAT_LIMIT - if (cmd->request_bufflen > NCR5380_STAT_LIMIT) + if (scsi_bufflen(cmd) > NCR5380_STAT_LIMIT) # endif switch (cmd->cmnd[0]) { case WRITE: case WRITE_6: case WRITE_10: hostdata->time_write[cmd->device->id] += (jiffies - hostdata->timebase); - /*hostdata->bytes_write[cmd->device->id] += cmd->request_bufflen;*/ + /*hostdata->bytes_write[cmd->device->id] += scsi_bufflen(cmd);*/ hostdata->pendingw--; break; case READ: case READ_6: case READ_10: hostdata->time_read[cmd->device->id] += (jiffies - hostdata->timebase); - /*hostdata->bytes_read[cmd->device->id] += cmd->request_bufflen;*/ + /*hostdata->bytes_read[cmd->device->id] += scsi_bufflen(cmd);*/ hostdata->pendingr--; break; } diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c index 2dcde373b20e..264f14ab5a61 100644 --- a/drivers/scsi/sun3_NCR5380.c +++ b/drivers/scsi/sun3_NCR5380.c @@ -515,9 +515,9 @@ static __inline__ void initialize_SCp(struct scsi_cmnd *cmd) * various queues are valid. */ - if (cmd->use_sg) { - cmd->SCp.buffer = (struct scatterlist *) cmd->request_buffer; - cmd->SCp.buffers_residual = cmd->use_sg - 1; + if (scsi_bufflen(cmd)) { + cmd->SCp.buffer = scsi_sglist(cmd); + cmd->SCp.buffers_residual = scsi_sg_count(cmd) - 1; cmd->SCp.ptr = (char *) SGADDR(cmd->SCp.buffer); cmd->SCp.this_residual = cmd->SCp.buffer->length; @@ -528,8 +528,8 @@ static __inline__ void initialize_SCp(struct scsi_cmnd *cmd) } else { cmd->SCp.buffer = NULL; cmd->SCp.buffers_residual = 0; - cmd->SCp.ptr = (char *) cmd->request_buffer; - cmd->SCp.this_residual = cmd->request_bufflen; + cmd->SCp.ptr = NULL; + cmd->SCp.this_residual = 0; } } @@ -935,7 +935,7 @@ static int NCR5380_queue_command(struct scsi_cmnd *cmd, } # endif # ifdef NCR5380_STAT_LIMIT - if (cmd->request_bufflen > NCR5380_STAT_LIMIT) + if (scsi_bufflen(cmd) > NCR5380_STAT_LIMIT) # endif switch (cmd->cmnd[0]) { @@ -943,14 +943,14 @@ static int NCR5380_queue_command(struct scsi_cmnd *cmd, case WRITE_6: case WRITE_10: hostdata->time_write[cmd->device->id] -= (jiffies - hostdata->timebase); - hostdata->bytes_write[cmd->device->id] += cmd->request_bufflen; + hostdata->bytes_write[cmd->device->id] += scsi_bufflen(cmd); hostdata->pendingw++; break; case READ: case READ_6: case READ_10: hostdata->time_read[cmd->device->id] -= (jiffies - hostdata->timebase); - hostdata->bytes_read[cmd->device->id] += cmd->request_bufflen; + hostdata->bytes_read[cmd->device->id] += scsi_bufflen(cmd); hostdata->pendingr++; break; } @@ -1345,7 +1345,7 @@ static void collect_stats(struct NCR5380_hostdata *hostdata, struct scsi_cmnd *cmd) { # ifdef NCR5380_STAT_LIMIT - if (cmd->request_bufflen > NCR5380_STAT_LIMIT) + if (scsi_bufflen(cmd) > NCR5380_STAT_LIMIT) # endif switch (cmd->cmnd[0]) { @@ -1353,14 +1353,14 @@ static void collect_stats(struct NCR5380_hostdata *hostdata, case WRITE_6: case WRITE_10: hostdata->time_write[cmd->device->id] += (jiffies - hostdata->timebase); - /*hostdata->bytes_write[cmd->device->id] += cmd->request_bufflen;*/ + /*hostdata->bytes_write[cmd->device->id] += scsi_bufflen(cmd);*/ hostdata->pendingw--; break; case READ: case READ_6: case READ_10: hostdata->time_read[cmd->device->id] += (jiffies - hostdata->timebase); - /*hostdata->bytes_read[cmd->device->id] += cmd->request_bufflen;*/ + /*hostdata->bytes_read[cmd->device->id] += scsi_bufflen(cmd);*/ hostdata->pendingr--; break; } -- cgit v1.2.3-59-g8ed1b From f858317d894a22eb2c26edcd26c7060fc4f40a15 Mon Sep 17 00:00:00 2001 From: "Salyzyn, Mark" Date: Tue, 30 Oct 2007 15:50:49 -0400 Subject: [SCSI] aacraid: forced reset override Some of our vendors have requested that our adapters ignore the hardware reset attempts during recovery and have enforced this with changes in Adapter Firmware. Some of our customers have requested the option to be able to reset the adapter under adverse adapter failure, we even had a few defects reported here considering it a regression that the Adapter could not be reset. This patch addresses this dichotomy. The user can force the adapter to be reset if it supports the IOP_RESET_ALWAYS command, in cases where the adapter has been programmed to ignore the reset, by setting the aacraid.check_reset parameter to a value of -1. The driver will not reset an Adapter that does not support the reset command(s). This patch also fixes and cleans up some of the logic associated with resetting the adapter. Signed-off-by: Mark Salyzyn Signed-off-by: James Signed-off-by: James Bottomley --- drivers/scsi/aacraid/aachba.c | 8 ++++---- drivers/scsi/aacraid/commsup.c | 13 +++++++------ drivers/scsi/aacraid/linit.c | 7 +++++-- drivers/scsi/aacraid/rx.c | 4 +++- 4 files changed, 19 insertions(+), 13 deletions(-) diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index a77ab8d693d4..ad8912cbe6e7 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -179,7 +179,7 @@ MODULE_PARM_DESC(check_interval, "Interval in seconds between adapter health che int aac_check_reset = 1; module_param_named(check_reset, aac_check_reset, int, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(aac_check_reset, "If adapter fails health check, reset the adapter."); +MODULE_PARM_DESC(aac_check_reset, "If adapter fails health check, reset the adapter. a value of -1 forces the reset to adapters programmed to ignore it."); int expose_physicals = -1; module_param(expose_physicals, int, S_IRUGO|S_IWUSR); @@ -1305,9 +1305,9 @@ int aac_get_adapter_info(struct aac_dev* dev) (int)sizeof(dev->supplement_adapter_info.VpdInfo.Tsid), dev->supplement_adapter_info.VpdInfo.Tsid); } - if (!aac_check_reset || + if (!aac_check_reset || ((aac_check_reset != 1) && (dev->supplement_adapter_info.SupportedOptions2 & - le32_to_cpu(AAC_OPTION_IGNORE_RESET))) { + le32_to_cpu(AAC_OPTION_IGNORE_RESET)))) { printk(KERN_INFO "%s%d: Reset Adapter Ignored\n", dev->name, dev->id); } @@ -1798,7 +1798,7 @@ static int aac_synchronize(struct scsi_cmnd *scsicmd) if (active) return SCSI_MLQUEUE_DEVICE_BUSY; - aac = (struct aac_dev *)scsicmd->device->host->hostdata; + aac = (struct aac_dev *)sdev->host->hostdata; if (aac->in_reset) return SCSI_MLQUEUE_HOST_BUSY; diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index abce48ccc85b..cb9a92f894ab 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -1217,12 +1217,13 @@ int aac_reset_adapter(struct aac_dev * aac, int forced) } /* Quiesce build, flush cache, write through mode */ - aac_send_shutdown(aac); + if (forced < 2) + aac_send_shutdown(aac); spin_lock_irqsave(host->host_lock, flagv); - retval = _aac_reset_adapter(aac, forced); + retval = _aac_reset_adapter(aac, forced ? forced : ((aac_check_reset != 0) && (aac_check_reset != 1))); spin_unlock_irqrestore(host->host_lock, flagv); - if (retval == -ENODEV) { + if ((forced < 2) && (retval == -ENODEV)) { /* Unwind aac_send_shutdown() IOP_RESET unsupported/disabled */ struct fib * fibctx = aac_fib_alloc(aac); if (fibctx) { @@ -1372,14 +1373,14 @@ int aac_check_health(struct aac_dev * aac) printk(KERN_ERR "%s: Host adapter BLINK LED 0x%x\n", aac->name, BlinkLED); - if (!aac_check_reset || + if (!aac_check_reset || ((aac_check_reset != 1) && (aac->supplement_adapter_info.SupportedOptions2 & - le32_to_cpu(AAC_OPTION_IGNORE_RESET))) + le32_to_cpu(AAC_OPTION_IGNORE_RESET)))) goto out; host = aac->scsi_host_ptr; if (aac->thread->pid != current->pid) spin_lock_irqsave(host->host_lock, flagv); - BlinkLED = _aac_reset_adapter(aac, 0); + BlinkLED = _aac_reset_adapter(aac, aac_check_reset != 1); if (aac->thread->pid != current->pid) spin_unlock_irqrestore(host->host_lock, flagv); return BlinkLED; diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 9dd331bc29b0..b4c9ff1b0859 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -584,8 +584,11 @@ static int aac_eh_reset(struct scsi_cmnd* cmd) * support a register, instead of a commanded, reset. */ if ((aac->supplement_adapter_info.SupportedOptions2 & - le32_to_cpu(AAC_OPTION_MU_RESET|AAC_OPTION_IGNORE_RESET)) == - le32_to_cpu(AAC_OPTION_MU_RESET)) + le32_to_cpu(AAC_OPTION_MU_RESET)) && + aac_check_reset && + ((aac_check_reset != 1) || + (aac->supplement_adapter_info.SupportedOptions2 & + le32_to_cpu(AAC_OPTION_IGNORE_RESET)))) aac_reset_adapter(aac, 2); /* Bypass wait for command quiesce */ return SUCCESS; /* Cause an immediate retry of the command with a ten second delay after successful tur */ } diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c index 73eef3dc5dc6..710a03e54ed0 100644 --- a/drivers/scsi/aacraid/rx.c +++ b/drivers/scsi/aacraid/rx.c @@ -549,7 +549,9 @@ int _aac_rx_init(struct aac_dev *dev) dev->OIMR = status = rx_readb (dev, MUnit.OIMR); if ((((status & 0x0c) != 0x0c) || aac_reset_devices || reset_devices) && !aac_rx_restart_adapter(dev, 0)) - ++restart; + /* Make sure the Hardware FIFO is empty */ + while ((++restart < 512) && + (rx_readl(dev, MUnit.OutboundQueue) != 0xFFFFFFFFL)); /* * Check to see if the board panic'd while booting. */ -- cgit v1.2.3-59-g8ed1b From a11b4743e58f53213acdd16e3a0004d035aa45f0 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Mon, 5 Nov 2007 12:37:43 +0100 Subject: [SCSI] zfcp: Remove unnecessary eh_bus_reset_handler callback The callback function used by zfcp always returns success, which is an indication for the SCSI midlayer to stop error handling. Remove the bus_reset callback, since the same function will be called via the host_reset callback. Signed-off-by: Christof Schmitt Signed-off-by: Swen Schillig Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_scsi.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index abae2027f7e5..28e2b52bf851 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -51,7 +51,6 @@ struct zfcp_data zfcp_data = { .queuecommand = zfcp_scsi_queuecommand, .eh_abort_handler = zfcp_scsi_eh_abort_handler, .eh_device_reset_handler = zfcp_scsi_eh_device_reset_handler, - .eh_bus_reset_handler = zfcp_scsi_eh_host_reset_handler, .eh_host_reset_handler = zfcp_scsi_eh_host_reset_handler, .can_queue = 4096, .this_id = -1, @@ -542,7 +541,7 @@ zfcp_task_management_function(struct zfcp_unit *unit, u8 tm_flags, } /** - * zfcp_scsi_eh_host_reset_handler - handler for host and bus reset + * zfcp_scsi_eh_host_reset_handler - handler for host reset */ static int zfcp_scsi_eh_host_reset_handler(struct scsi_cmnd *scpnt) { @@ -552,7 +551,7 @@ static int zfcp_scsi_eh_host_reset_handler(struct scsi_cmnd *scpnt) unit = (struct zfcp_unit*) scpnt->device->hostdata; adapter = unit->port->adapter; - ZFCP_LOG_NORMAL("host/bus reset because of problems with " + ZFCP_LOG_NORMAL("host reset because of problems with " "unit 0x%016Lx\n", unit->fcp_lun); zfcp_erp_adapter_reopen(adapter, 0); -- cgit v1.2.3-59-g8ed1b From 345bfea5e424f086b654294eddcfa3f8ff92b47f Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Mon, 5 Nov 2007 12:37:44 +0100 Subject: [SCSI] zfcp: Use also port and adapter to identify unit in messages. Signed-off-by: Christof Schmitt Signed-off-by: Swen Schillig Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_scsi.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index 28e2b52bf851..c6b6295395b0 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -458,7 +458,9 @@ zfcp_scsi_eh_device_reset_handler(struct scsi_cmnd *scpnt) retval = SUCCESS; goto out; } - ZFCP_LOG_NORMAL("resetting unit 0x%016Lx\n", unit->fcp_lun); + ZFCP_LOG_NORMAL("resetting unit 0x%016Lx on port 0x%016Lx, adapter %s\n", + unit->fcp_lun, unit->port->wwpn, + zfcp_get_busid_by_adapter(unit->port->adapter)); /* * If we do not know whether the unit supports 'logical unit reset' @@ -552,7 +554,9 @@ static int zfcp_scsi_eh_host_reset_handler(struct scsi_cmnd *scpnt) adapter = unit->port->adapter; ZFCP_LOG_NORMAL("host reset because of problems with " - "unit 0x%016Lx\n", unit->fcp_lun); + "unit 0x%016Lx on port 0x%016Lx, adapter %s\n", + unit->fcp_lun, unit->port->wwpn, + zfcp_get_busid_by_adapter(unit->port->adapter)); zfcp_erp_adapter_reopen(adapter, 0); zfcp_erp_wait(adapter); -- cgit v1.2.3-59-g8ed1b From 18edcdbdb2911baa5aaeb0ed781e3424cbf98d64 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Mon, 5 Nov 2007 12:37:45 +0100 Subject: [SCSI] zfcp: Specify waiting times in ERP in seconds It is not necessary to use jiffies or milliseconds to specify waiting times that last a couple of seconds. Signed-off-by: Christof Schmitt Signed-off-by: Martin Schwidefsky Signed-off-by: Swen Schillig Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_def.h | 4 ++-- drivers/s390/scsi/zfcp_erp.c | 8 ++++---- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h index e268f79bdbd2..3d2d2dc0d6f8 100644 --- a/drivers/s390/scsi/zfcp_def.h +++ b/drivers/s390/scsi/zfcp_def.h @@ -118,7 +118,7 @@ zfcp_address_to_sg(void *address, struct scatterlist *list, unsigned int size) #define ZFCP_SBAL_TIMEOUT (5*HZ) -#define ZFCP_TYPE2_RECOVERY_TIME (8*HZ) +#define ZFCP_TYPE2_RECOVERY_TIME 8 /* seconds */ /* queue polling (values in microseconds) */ #define ZFCP_MAX_INPUT_THRESHOLD 5000 /* FIXME: tune */ @@ -139,7 +139,7 @@ zfcp_address_to_sg(void *address, struct scatterlist *list, unsigned int size) #define ZFCP_STATUS_READS_RECOM FSF_STATUS_READS_RECOM /* Do 1st retry in 1 second, then double the timeout for each following retry */ -#define ZFCP_EXCHANGE_CONFIG_DATA_FIRST_SLEEP 100 +#define ZFCP_EXCHANGE_CONFIG_DATA_FIRST_SLEEP 1 #define ZFCP_EXCHANGE_CONFIG_DATA_RETRIES 7 /* timeout value for "default timer" for fsf requests */ diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 07fa824d179f..9c6ea9962cd2 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -131,7 +131,7 @@ static void zfcp_close_qdio(struct zfcp_adapter *adapter) debug_text_event(adapter->erp_dbf, 3, "qdio_down2a"); while (qdio_shutdown(adapter->ccw_device, QDIO_FLAG_CLEANUP_USING_CLEAR) == -EINPROGRESS) - msleep(1000); + ssleep(1); debug_text_event(adapter->erp_dbf, 3, "qdio_down2b"); /* cleanup used outbound sbals */ @@ -1900,7 +1900,7 @@ zfcp_erp_adapter_strategy(struct zfcp_erp_action *erp_action) ZFCP_LOG_INFO("Waiting to allow the adapter %s " "to recover itself\n", zfcp_get_busid_by_adapter(adapter)); - msleep(jiffies_to_msecs(ZFCP_TYPE2_RECOVERY_TIME)); + ssleep(ZFCP_TYPE2_RECOVERY_TIME); } return retval; @@ -2080,7 +2080,7 @@ zfcp_erp_adapter_strategy_open_qdio(struct zfcp_erp_action *erp_action) debug_text_event(adapter->erp_dbf, 3, "qdio_down1a"); while (qdio_shutdown(adapter->ccw_device, QDIO_FLAG_CLEANUP_USING_CLEAR) == -EINPROGRESS) - msleep(1000); + ssleep(1); debug_text_event(adapter->erp_dbf, 3, "qdio_down1b"); failed_qdio_establish: @@ -2165,7 +2165,7 @@ zfcp_erp_adapter_strategy_open_fsf_xconfig(struct zfcp_erp_action *erp_action) ZFCP_LOG_DEBUG("host connection still initialising... " "waiting and retrying...\n"); /* sleep a little bit before retry */ - msleep(jiffies_to_msecs(sleep)); + ssleep(sleep); sleep *= 2; } -- cgit v1.2.3-59-g8ed1b From e39c8877a41e8f70225baeeb74fade8fe3a80d8b Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Mon, 5 Nov 2007 12:37:46 +0100 Subject: [SCSI] zfcp: Remove SCSI devices when removing complete adapter The common I/O layer can call remove a handler to inform zfcp that a device disappeared. The handler zfcp_ccw_remove then removes all unit, port and the adapter data structures. Removing the units requires that the SCSI devices are removed first. Signed-off-by: Christof Schmitt Signed-off-by: Swen Schillig Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_ccw.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c index e01cbf152a81..a6a29a24d28a 100644 --- a/drivers/s390/scsi/zfcp_ccw.c +++ b/drivers/s390/scsi/zfcp_ccw.c @@ -120,6 +120,9 @@ zfcp_ccw_remove(struct ccw_device *ccw_device) list_for_each_entry_safe(port, p, &adapter->port_remove_lh, list) { list_for_each_entry_safe(unit, u, &port->unit_remove_lh, list) { + if (atomic_test_mask(ZFCP_STATUS_UNIT_REGISTERED, + &unit->status)) + scsi_remove_device(unit->device); zfcp_unit_dequeue(unit); } zfcp_port_dequeue(port); -- cgit v1.2.3-59-g8ed1b From 1de1b43b5f0bb536126e31f07ec833e01969ed1c Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Mon, 5 Nov 2007 12:37:47 +0100 Subject: [SCSI] zfcp: Fix deadlock when adding invalid LUN When adding an invalid LUN, there is a deadlock between the add via scsi_scan_target and the slave_destroy handler: The handler waits for the scan to complete, but for an invalid unit, scsi_scan_target directly calls the slave_destroy handler. Fix the deadlock by removing the wait in the slave_destroy handler, it was not necessary anyway. Signed-off-by: Christof Schmitt Signed-off-by: Martin Schwidefsky Signed-off-by: Swen Schillig Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_aux.c | 2 -- drivers/s390/scsi/zfcp_def.h | 4 ---- drivers/s390/scsi/zfcp_erp.c | 1 - drivers/s390/scsi/zfcp_scsi.c | 3 --- 4 files changed, 10 deletions(-) diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index 00118499018b..874b55ed00a3 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -844,8 +844,6 @@ zfcp_unit_enqueue(struct zfcp_port *port, fcp_lun_t fcp_lun) unit->sysfs_device.release = zfcp_sysfs_unit_release; dev_set_drvdata(&unit->sysfs_device, unit); - init_waitqueue_head(&unit->scsi_scan_wq); - /* mark unit unusable as long as sysfs registration is not complete */ atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, &unit->status); diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h index 3d2d2dc0d6f8..294d0792e82b 100644 --- a/drivers/s390/scsi/zfcp_def.h +++ b/drivers/s390/scsi/zfcp_def.h @@ -983,10 +983,6 @@ struct zfcp_unit { struct scsi_device *device; /* scsi device struct pointer */ struct zfcp_erp_action erp_action; /* pending error recovery */ atomic_t erp_counter; - wait_queue_head_t scsi_scan_wq; /* can be used to wait until - all scsi_scan_target - requests have been - completed. */ }; /* FSF request */ diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 9c6ea9962cd2..67d74ed0f25c 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -1609,7 +1609,6 @@ static void zfcp_erp_scsi_scan(struct work_struct *work) scsi_scan_target(&rport->dev, 0, rport->scsi_target_id, unit->scsi_lun, 0); atomic_clear_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, &unit->status); - wake_up(&unit->scsi_scan_wq); zfcp_unit_put(unit); kfree(p); } diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index c6b6295395b0..3298fd35000c 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -180,9 +180,6 @@ static void zfcp_scsi_slave_destroy(struct scsi_device *sdpnt) if (unit) { zfcp_erp_wait(unit->port->adapter); - wait_event(unit->scsi_scan_wq, - atomic_test_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, - &unit->status) == 0); atomic_clear_mask(ZFCP_STATUS_UNIT_REGISTERED, &unit->status); sdpnt->hostdata = NULL; unit->device = NULL; -- cgit v1.2.3-59-g8ed1b From 3f48985823001c89c9bd5c5e57cc07530578dfcc Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Mon, 5 Nov 2007 12:37:48 +0100 Subject: [SCSI] zfcp: Reduce flood on hba trace Remove tracing for request with a "qualifier" field set in the response. The protocol status qualifier now contains measurement data for "good" commands, so this check would trace every response by default. The fix is to simply remove the "qual" tracing: The responses with an interesting status are also traced as "ferr" or "perr" and all responses can be traced as "norm" with a higher trace level. Signed-off-by: Christof Schmitt Signed-off-by: Swen Schillig Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_dbf.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c index ffa3bf756943..701046c9bb33 100644 --- a/drivers/s390/scsi/zfcp_dbf.c +++ b/drivers/s390/scsi/zfcp_dbf.c @@ -161,12 +161,6 @@ void zfcp_hba_dbf_event_fsf_response(struct zfcp_fsf_req *fsf_req) (fsf_req->fsf_command == FSF_QTCB_OPEN_LUN)) { strncpy(rec->tag2, "open", ZFCP_DBF_TAG_SIZE); level = 4; - } else if ((prot_status_qual->doubleword[0] != 0) || - (prot_status_qual->doubleword[1] != 0) || - (fsf_status_qual->doubleword[0] != 0) || - (fsf_status_qual->doubleword[1] != 0)) { - strncpy(rec->tag2, "qual", ZFCP_DBF_TAG_SIZE); - level = 3; } else { strncpy(rec->tag2, "norm", ZFCP_DBF_TAG_SIZE); level = 6; -- cgit v1.2.3-59-g8ed1b From eb44820c28bc9a042e1157b41c677018a8fdfc74 Mon Sep 17 00:00:00 2001 From: Rob Landley Date: Sat, 3 Nov 2007 13:30:39 -0500 Subject: [SCSI] Add Documentation and integrate into docbook build Add Documentation/DocBook/scsi_midlayer.tmpl, add to Makefile, and update lots of kerneldoc comments in drivers/scsi/*. Updated with comments from Stefan Richter, Stephen M. Cameron, James Bottomley and Randy Dunlap. Signed-off-by: Rob Landley Signed-off-by: James Bottomley --- Documentation/DocBook/Makefile | 2 +- Documentation/DocBook/scsi_midlayer.tmpl | 409 +++++++++++++++++++++++++++++++ drivers/scsi/constants.c | 1 - drivers/scsi/hosts.c | 4 +- drivers/scsi/scsi.c | 183 +++++++------- drivers/scsi/scsi_devinfo.c | 34 ++- drivers/scsi/scsi_error.c | 46 ++-- drivers/scsi/scsi_ioctl.c | 24 +- drivers/scsi/scsi_lib.c | 42 ++-- drivers/scsi/scsi_netlink.c | 19 +- drivers/scsi/scsi_proc.c | 110 ++++++++- drivers/scsi/scsi_scan.c | 32 ++- drivers/scsi/scsi_transport_fc.c | 102 ++++---- drivers/scsi/scsi_transport_iscsi.c | 17 +- drivers/scsi/scsi_transport_sas.c | 40 +-- drivers/scsi/scsi_transport_srp.c | 10 +- drivers/scsi/scsicam.c | 35 ++- 17 files changed, 821 insertions(+), 289 deletions(-) create mode 100644 Documentation/DocBook/scsi_midlayer.tmpl diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 4953bc258729..c6c5e59daaca 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -11,7 +11,7 @@ DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \ procfs-guide.xml writing_usb_driver.xml \ kernel-api.xml filesystems.xml lsm.xml usb.xml \ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ - genericirq.xml s390-drivers.xml uio-howto.xml + genericirq.xml s390-drivers.xml uio-howto.xml scsi_midlayer.xml ### # The build process is as follows (targets): diff --git a/Documentation/DocBook/scsi_midlayer.tmpl b/Documentation/DocBook/scsi_midlayer.tmpl new file mode 100644 index 000000000000..6255930216b3 --- /dev/null +++ b/Documentation/DocBook/scsi_midlayer.tmpl @@ -0,0 +1,409 @@ + + + + + + SCSI Mid Layer Guide + + + + James + Bottomley + +
+ James.Bottomley@steeleye.com +
+
+
+ + + Rob + Landley + +
+ rob@landley.net +
+
+
+ +
+ + + 2007 + Linux Foundation + + + + + This documentation is free software; you can redistribute + it and/or modify it under the terms of the GNU General Public + License version 2. + + + + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + For more details see the file COPYING in the source + distribution of Linux. + + +
+ + + + + Introduction + + Protocol vs bus + + Once upon a time, the Small Computer Systems Interface defined both + a parallel I/O bus and a data protocol to connect a wide variety of + peripherals (disk drives, tape drives, modems, printers, scanners, + optical drives, test equipment, and medical devices) to a host + computer. + + + Although the old parallel (fast/wide/ultra) SCSI bus has largely + fallen out of use, the SCSI command set is more widely used than ever + to communicate with devices over a number of different busses. + + + The SCSI protocol + is a big-endian peer-to-peer packet based protocol. SCSI commands + are 6, 10, 12, or 16 bytes long, often followed by an associated data + payload. + + + SCSI commands can be transported over just about any kind of bus, and + are the default protocol for storage devices attached to USB, SATA, + SAS, Fibre Channel, FireWire, and ATAPI devices. SCSI packets are + also commonly exchanged over Infiniband, + I20, TCP/IP + (iSCSI), even + Parallel + ports. + + + + Design of the Linux SCSI subsystem + + The SCSI subsystem uses a three layer design, with upper, mid, and low + layers. Every operation involving the SCSI subsystem (such as reading + a sector from a disk) uses one driver at each of the 3 levels: one + upper layer driver, one lower layer driver, and the scsi midlayer. + + + The SCSI upper layer provides the interface between userspace and the + kernel, in the form of block and char device nodes for I/O and + ioctl(). The SCSI lower layer contains drivers for specific hardware + devices. + + + In between is the SCSI mid-layer, analogous to a network routing + layer such as the IPv4 stack. The SCSI mid-layer routes a packet + based data protocol between the upper layer's /dev nodes and the + corresponding devices in the lower layer. It manages command queues, + provides error handling and power management functions, and responds + to ioctl() requests. + + + + + + SCSI upper layer + + The upper layer supports the user-kernel interface by providing + device nodes. + + + sd (SCSI Disk) + sd (sd_mod.o) + + + + sr (SCSI CD-ROM) + sr (sr_mod.o) + + + st (SCSI Tape) + st (st.o) + + + sg (SCSI Generic) + sg (sg.o) + + + ch (SCSI Media Changer) + ch (ch.c) + + + + + SCSI mid layer + + + SCSI midlayer implementation + + include/scsi/scsi_device.h + + +!Iinclude/scsi/scsi_device.h + + + + drivers/scsi/scsi.c + Main file for the scsi midlayer. +!Edrivers/scsi/scsi.c + + + drivers/scsi/scsicam.c + + SCSI + Common Access Method support functions, for use with + HDIO_GETGEO, etc. + +!Edrivers/scsi/scsicam.c + + + drivers/scsi/scsi_error.c + Common SCSI error/timeout handling routines. +!Edrivers/scsi/scsi_error.c + + + drivers/scsi/scsi_devinfo.c + + Manage scsi_dev_info_list, which tracks blacklisted and whitelisted + devices. + +!Idrivers/scsi/scsi_devinfo.c + + + drivers/scsi/scsi_ioctl.c + + Handle ioctl() calls for scsi devices. + +!Edrivers/scsi/scsi_ioctl.c + + + drivers/scsi/scsi_lib.c + + SCSI queuing library. + +!Edrivers/scsi/scsi_lib.c + + + drivers/scsi/scsi_lib_dma.c + + SCSI library functions depending on DMA + (map and unmap scatter-gather lists). + +!Edrivers/scsi/scsi_lib_dma.c + + + drivers/scsi/scsi_module.c + + The file drivers/scsi/scsi_module.c contains legacy support for + old-style host templates. It should never be used by any new driver. + + + + drivers/scsi/scsi_proc.c + + The functions in this file provide an interface between + the PROC file system and the SCSI device drivers + It is mainly used for debugging, statistics and to pass + information directly to the lowlevel driver. + + I.E. plumbing to manage /proc/scsi/* + +!Idrivers/scsi/scsi_proc.c + + + drivers/scsi/scsi_netlink.c + + Infrastructure to provide async events from transports to userspace + via netlink, using a single NETLINK_SCSITRANSPORT protocol for all + transports. + + See the + original patch submission for more details. + +!Idrivers/scsi/scsi_netlink.c + + + drivers/scsi/scsi_scan.c + + Scan a host to determine which (if any) devices are attached. + + The general scanning/probing algorithm is as follows, exceptions are + made to it depending on device specific flags, compilation options, + and global variable (boot or module load time) settings. + + A specific LUN is scanned via an INQUIRY command; if the LUN has a + device attached, a scsi_device is allocated and setup for it. + + For every id of every channel on the given host, start by scanning + LUN 0. Skip hosts that don't respond at all to a scan of LUN 0. + Otherwise, if LUN 0 has a device attached, allocate and setup a + scsi_device for it. If target is SCSI-3 or up, issue a REPORT LUN, + and scan all of the LUNs returned by the REPORT LUN; else, + sequentially scan LUNs up until some maximum is reached, or a LUN is + seen that cannot have a device attached to it. + +!Idrivers/scsi/scsi_scan.c + + + drivers/scsi/scsi_sysctl.c + + Set up the sysctl entry: "/dev/scsi/logging_level" + (DEV_SCSI_LOGGING_LEVEL) which sets/returns scsi_logging_level. + + + + drivers/scsi/scsi_sysfs.c + + SCSI sysfs interface routines. + +!Edrivers/scsi/scsi_sysfs.c + + + drivers/scsi/hosts.c + + mid to lowlevel SCSI driver interface + +!Edrivers/scsi/hosts.c + + + drivers/scsi/constants.c + + mid to lowlevel SCSI driver interface + +!Edrivers/scsi/constants.c + + + + + Transport classes + + Transport classes are service libraries for drivers in the scsi + lower layer, which expose transport attributes in sysfs. + + + Fibre Channel transport + + The file drivers/scsi/scsi_transport_fc.c defines transport attributes + for Fibre Channel. + +!Edrivers/scsi/scsi_transport_fc.c + + + iSCSI transport class + + The file drivers/scsi/scsi_transport_iscsi.c defines transport + attributes for the iSCSI class, which sends SCSI packets over TCP/IP + connections. + +!Edrivers/scsi/scsi_transport_iscsi.c + + + Serial Attached SCSI (SAS) transport class + + The file drivers/scsi/scsi_transport_sas.c defines transport + attributes for Serial Attached SCSI, a variant of SATA aimed at + large high-end systems. + + + The SAS transport class contains common code to deal with SAS HBAs, + an aproximated representation of SAS topologies in the driver model, + and various sysfs attributes to expose these topologies and managment + interfaces to userspace. + + + In addition to the basic SCSI core objects this transport class + introduces two additional intermediate objects: The SAS PHY + as represented by struct sas_phy defines an "outgoing" PHY on + a SAS HBA or Expander, and the SAS remote PHY represented by + struct sas_rphy defines an "incoming" PHY on a SAS Expander or + end device. Note that this is purely a software concept, the + underlying hardware for a PHY and a remote PHY is the exactly + the same. + + + There is no concept of a SAS port in this code, users can see + what PHYs form a wide port based on the port_identifier attribute, + which is the same for all PHYs in a port. + +!Edrivers/scsi/scsi_transport_sas.c + + + SATA transport class + + The SATA transport is handled by libata, which has its own book of + documentation in this directory. + + + + Parallel SCSI (SPI) transport class + + The file drivers/scsi/scsi_transport_spi.c defines transport + attributes for traditional (fast/wide/ultra) SCSI busses. + +!Edrivers/scsi/scsi_transport_spi.c + + + SCSI RDMA (SRP) transport class + + The file drivers/scsi/scsi_transport_srp.c defines transport + attributes for SCSI over Remote Direct Memory Access. + +!Edrivers/scsi/scsi_transport_srp.c + + + + + + + SCSI lower layer + + Host Bus Adapter transport types + + Many modern device controllers use the SCSI command set as a protocol to + communicate with their devices through many different types of physical + connections. + + + In SCSI language a bus capable of carrying SCSI commands is + called a "transport", and a controller connecting to such a bus is + called a "host bus adapter" (HBA). + + + Debug transport + + The file drivers/scsi/scsi_debug.c simulates a host adapter with a + variable number of disks (or disk like devices) attached, sharing a + common amount of RAM. Does a lot of checking to make sure that we are + not getting blocks mixed up, and panics the kernel if anything out of + the ordinary is seen. + + + To be more realistic, the simulated devices have the transport + attributes of SAS disks. + + + For documentation see + http://www.torque.net/sg/sdebug26.html + + + + + todo + Parallel (fast/wide/ultra) SCSI, USB, SATA, + SAS, Fibre Channel, FireWire, ATAPI devices, Infiniband, + I20, iSCSI, Parallel ports, netlink... + + + + +
diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c index fac4314cd2ad..403a7f2d8f9b 100644 --- a/drivers/scsi/constants.c +++ b/drivers/scsi/constants.c @@ -362,7 +362,6 @@ void scsi_print_command(struct scsi_cmnd *cmd) EXPORT_SYMBOL(scsi_print_command); /** - * * scsi_print_status - print scsi status description * @scsi_status: scsi status value * diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index 24271a871b8c..9a10b4335e76 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -54,8 +54,7 @@ static struct class shost_class = { }; /** - * scsi_host_set_state - Take the given host through the host - * state model. + * scsi_host_set_state - Take the given host through the host state model. * @shost: scsi host to change the state of. * @state: state to change to. * @@ -431,7 +430,6 @@ EXPORT_SYMBOL(scsi_unregister); /** * scsi_host_lookup - get a reference to a Scsi_Host by host no - * * @hostnum: host number to locate * * Return value: diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 0fb1709ce5e3..412a351c6cf7 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -122,6 +122,11 @@ static const char *const scsi_device_types[] = { "Automation/Drive ", }; +/** + * scsi_device_type - Return 17 char string indicating device type. + * @type: type number to look up + */ + const char * scsi_device_type(unsigned type) { if (type == 0x1e) @@ -156,6 +161,14 @@ static struct scsi_host_cmd_pool scsi_cmd_dma_pool = { static DEFINE_MUTEX(host_cmd_pool_mutex); +/** + * __scsi_get_command - Allocate a struct scsi_cmnd + * @shost: host to transmit command + * @gfp_mask: allocation mask + * + * Description: allocate a struct scsi_cmd from host's slab, recycling from the + * host's free_list if necessary. + */ struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *shost, gfp_t gfp_mask) { struct scsi_cmnd *cmd; @@ -179,13 +192,10 @@ struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *shost, gfp_t gfp_mask) } EXPORT_SYMBOL_GPL(__scsi_get_command); -/* - * Function: scsi_get_command() - * - * Purpose: Allocate and setup a scsi command block - * - * Arguments: dev - parent scsi device - * gfp_mask- allocator flags +/** + * scsi_get_command - Allocate and setup a scsi command block + * @dev: parent scsi device + * @gfp_mask: allocator flags * * Returns: The allocated scsi command structure. */ @@ -217,6 +227,12 @@ struct scsi_cmnd *scsi_get_command(struct scsi_device *dev, gfp_t gfp_mask) } EXPORT_SYMBOL(scsi_get_command); +/** + * __scsi_put_command - Free a struct scsi_cmnd + * @shost: dev->host + * @cmd: Command to free + * @dev: parent scsi device + */ void __scsi_put_command(struct Scsi_Host *shost, struct scsi_cmnd *cmd, struct device *dev) { @@ -237,12 +253,9 @@ void __scsi_put_command(struct Scsi_Host *shost, struct scsi_cmnd *cmd, } EXPORT_SYMBOL(__scsi_put_command); -/* - * Function: scsi_put_command() - * - * Purpose: Free a scsi command block - * - * Arguments: cmd - command block to free +/** + * scsi_put_command - Free a scsi command block + * @cmd: command block to free * * Returns: Nothing. * @@ -263,12 +276,13 @@ void scsi_put_command(struct scsi_cmnd *cmd) } EXPORT_SYMBOL(scsi_put_command); -/* - * Function: scsi_setup_command_freelist() - * - * Purpose: Setup the command freelist for a scsi host. +/** + * scsi_setup_command_freelist - Setup the command freelist for a scsi host. + * @shost: host to allocate the freelist for. * - * Arguments: shost - host to allocate the freelist for. + * Description: The command freelist protects against system-wide out of memory + * deadlock by preallocating one SCSI command structure for each host, so the + * system can always write to a swap file on a device associated with that host. * * Returns: Nothing. */ @@ -282,7 +296,7 @@ int scsi_setup_command_freelist(struct Scsi_Host *shost) /* * Select a command slab for this host and create it if not - * yet existant. + * yet existent. */ mutex_lock(&host_cmd_pool_mutex); pool = (shost->unchecked_isa_dma ? &scsi_cmd_dma_pool : &scsi_cmd_pool); @@ -318,12 +332,9 @@ int scsi_setup_command_freelist(struct Scsi_Host *shost) } -/* - * Function: scsi_destroy_command_freelist() - * - * Purpose: Release the command freelist for a scsi host. - * - * Arguments: shost - host that's freelist is going to be destroyed +/** + * scsi_destroy_command_freelist - Release the command freelist for a scsi host. + * @shost: host whose freelist is going to be destroyed */ void scsi_destroy_command_freelist(struct Scsi_Host *shost) { @@ -441,8 +452,12 @@ void scsi_log_completion(struct scsi_cmnd *cmd, int disposition) } #endif -/* - * Assign a serial number to the request for error recovery +/** + * scsi_cmd_get_serial - Assign a serial number to a command + * @host: the scsi host + * @cmd: command to assign serial number to + * + * Description: a serial number identifies a request for error recovery * and debugging purposes. Protected by the Host_Lock of host. */ static inline void scsi_cmd_get_serial(struct Scsi_Host *host, struct scsi_cmnd *cmd) @@ -452,14 +467,12 @@ static inline void scsi_cmd_get_serial(struct Scsi_Host *host, struct scsi_cmnd cmd->serial_number = host->cmd_serial_number++; } -/* - * Function: scsi_dispatch_command - * - * Purpose: Dispatch a command to the low-level driver. - * - * Arguments: cmd - command block we are dispatching. +/** + * scsi_dispatch_command - Dispatch a command to the low-level driver. + * @cmd: command block we are dispatching. * - * Notes: + * Return: nonzero return request was rejected and device's queue needs to be + * plugged. */ int scsi_dispatch_cmd(struct scsi_cmnd *cmd) { @@ -585,7 +598,7 @@ int scsi_dispatch_cmd(struct scsi_cmnd *cmd) /** * scsi_req_abort_cmd -- Request command recovery for the specified command - * cmd: pointer to the SCSI command of interest + * @cmd: pointer to the SCSI command of interest * * This function requests that SCSI Core start recovery for the * command by deleting the timer and adding the command to the eh @@ -606,9 +619,9 @@ EXPORT_SYMBOL(scsi_req_abort_cmd); * @cmd: The SCSI Command for which a low-level device driver (LLDD) gives * ownership back to SCSI Core -- i.e. the LLDD has finished with it. * - * This function is the mid-level's (SCSI Core) interrupt routine, which - * regains ownership of the SCSI command (de facto) from a LLDD, and enqueues - * the command to the done queue for further processing. + * Description: This function is the mid-level's (SCSI Core) interrupt routine, + * which regains ownership of the SCSI command (de facto) from a LLDD, and + * enqueues the command to the done queue for further processing. * * This is the producer of the done queue who enqueues at the tail. * @@ -617,7 +630,7 @@ EXPORT_SYMBOL(scsi_req_abort_cmd); static void scsi_done(struct scsi_cmnd *cmd) { /* - * We don't have to worry about this one timing out any more. + * We don't have to worry about this one timing out anymore. * If we are unable to remove the timer, then the command * has already timed out. In which case, we have no choice but to * let the timeout function run, as we have no idea where in fact @@ -660,10 +673,11 @@ static struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd) return *(struct scsi_driver **)cmd->request->rq_disk->private_data; } -/* - * Function: scsi_finish_command +/** + * scsi_finish_command - cleanup and pass command back to upper layer + * @cmd: the command * - * Purpose: Pass command off to upper layer for finishing of I/O + * Description: Pass command off to upper layer for finishing of I/O * request, waking processes that are waiting on results, * etc. */ @@ -708,18 +722,14 @@ void scsi_finish_command(struct scsi_cmnd *cmd) } EXPORT_SYMBOL(scsi_finish_command); -/* - * Function: scsi_adjust_queue_depth() - * - * Purpose: Allow low level drivers to tell us to change the queue depth - * on a specific SCSI device - * - * Arguments: sdev - SCSI Device in question - * tagged - Do we use tagged queueing (non-0) or do we treat - * this device as an untagged device (0) - * tags - Number of tags allowed if tagged queueing enabled, - * or number of commands the low level driver can - * queue up in non-tagged mode (as per cmd_per_lun). +/** + * scsi_adjust_queue_depth - Let low level drivers change a device's queue depth + * @sdev: SCSI Device in question + * @tagged: Do we use tagged queueing (non-0) or do we treat + * this device as an untagged device (0) + * @tags: Number of tags allowed if tagged queueing enabled, + * or number of commands the low level driver can + * queue up in non-tagged mode (as per cmd_per_lun). * * Returns: Nothing * @@ -742,8 +752,8 @@ void scsi_adjust_queue_depth(struct scsi_device *sdev, int tagged, int tags) spin_lock_irqsave(sdev->request_queue->queue_lock, flags); - /* Check to see if the queue is managed by the block layer - * if it is, and we fail to adjust the depth, exit */ + /* Check to see if the queue is managed by the block layer. + * If it is, and we fail to adjust the depth, exit. */ if (blk_queue_tagged(sdev->request_queue) && blk_queue_resize_tags(sdev->request_queue, tags) != 0) goto out; @@ -772,20 +782,17 @@ void scsi_adjust_queue_depth(struct scsi_device *sdev, int tagged, int tags) } EXPORT_SYMBOL(scsi_adjust_queue_depth); -/* - * Function: scsi_track_queue_full() +/** + * scsi_track_queue_full - track QUEUE_FULL events to adjust queue depth + * @sdev: SCSI Device in question + * @depth: Current number of outstanding SCSI commands on this device, + * not counting the one returned as QUEUE_FULL. * - * Purpose: This function will track successive QUEUE_FULL events on a + * Description: This function will track successive QUEUE_FULL events on a * specific SCSI device to determine if and when there is a * need to adjust the queue depth on the device. * - * Arguments: sdev - SCSI Device in question - * depth - Current number of outstanding SCSI commands on - * this device, not counting the one returned as - * QUEUE_FULL. - * - * Returns: 0 - No change needed - * >0 - Adjust queue depth to this new depth + * Returns: 0 - No change needed, >0 - Adjust queue depth to this new depth, * -1 - Drop back to untagged operation using host->cmd_per_lun * as the untagged command depth * @@ -824,10 +831,10 @@ int scsi_track_queue_full(struct scsi_device *sdev, int depth) EXPORT_SYMBOL(scsi_track_queue_full); /** - * scsi_device_get - get an addition reference to a scsi_device + * scsi_device_get - get an additional reference to a scsi_device * @sdev: device to get a reference to * - * Gets a reference to the scsi_device and increments the use count + * Description: Gets a reference to the scsi_device and increments the use count * of the underlying LLDD module. You must hold host_lock of the * parent Scsi_Host or already have a reference when calling this. */ @@ -849,8 +856,8 @@ EXPORT_SYMBOL(scsi_device_get); * scsi_device_put - release a reference to a scsi_device * @sdev: device to release a reference on. * - * Release a reference to the scsi_device and decrements the use count - * of the underlying LLDD module. The device is freed once the last + * Description: Release a reference to the scsi_device and decrements the use + * count of the underlying LLDD module. The device is freed once the last * user vanishes. */ void scsi_device_put(struct scsi_device *sdev) @@ -867,7 +874,7 @@ void scsi_device_put(struct scsi_device *sdev) } EXPORT_SYMBOL(scsi_device_put); -/* helper for shost_for_each_device, thus not documented */ +/* helper for shost_for_each_device, see that for documentation */ struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *shost, struct scsi_device *prev) { @@ -895,6 +902,8 @@ EXPORT_SYMBOL(__scsi_iterate_devices); /** * starget_for_each_device - helper to walk all devices of a target * @starget: target whose devices we want to iterate over. + * @data: Opaque passed to each function call. + * @fn: Function to call on each device * * This traverses over each device of @starget. The devices have * a reference that must be released by scsi_host_put when breaking @@ -946,13 +955,13 @@ EXPORT_SYMBOL(__starget_for_each_device); * @starget: SCSI target pointer * @lun: SCSI Logical Unit Number * - * Looks up the scsi_device with the specified @lun for a give - * @starget. The returned scsi_device does not have an additional + * Description: Looks up the scsi_device with the specified @lun for a given + * @starget. The returned scsi_device does not have an additional * reference. You must hold the host's host_lock over this call and * any access to the returned scsi_device. * * Note: The only reason why drivers would want to use this is because - * they're need to access the device list in irq context. Otherwise you + * they need to access the device list in irq context. Otherwise you * really want to use scsi_device_lookup_by_target instead. **/ struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *starget, @@ -974,9 +983,9 @@ EXPORT_SYMBOL(__scsi_device_lookup_by_target); * @starget: SCSI target pointer * @lun: SCSI Logical Unit Number * - * Looks up the scsi_device with the specified @channel, @id, @lun for a - * give host. The returned scsi_device has an additional reference that - * needs to be release with scsi_host_put once you're done with it. + * Description: Looks up the scsi_device with the specified @channel, @id, @lun + * for a given host. The returned scsi_device has an additional reference that + * needs to be released with scsi_device_put once you're done with it. **/ struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *starget, uint lun) @@ -996,19 +1005,19 @@ struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *starget, EXPORT_SYMBOL(scsi_device_lookup_by_target); /** - * scsi_device_lookup - find a device given the host (UNLOCKED) + * __scsi_device_lookup - find a device given the host (UNLOCKED) * @shost: SCSI host pointer * @channel: SCSI channel (zero if only one channel) - * @pun: SCSI target number (physical unit number) + * @id: SCSI target number (physical unit number) * @lun: SCSI Logical Unit Number * - * Looks up the scsi_device with the specified @channel, @id, @lun for a - * give host. The returned scsi_device does not have an additional reference. - * You must hold the host's host_lock over this call and any access to the - * returned scsi_device. + * Description: Looks up the scsi_device with the specified @channel, @id, @lun + * for a given host. The returned scsi_device does not have an additional + * reference. You must hold the host's host_lock over this call and any access + * to the returned scsi_device. * * Note: The only reason why drivers would want to use this is because - * they're need to access the device list in irq context. Otherwise you + * they need to access the device list in irq context. Otherwise you * really want to use scsi_device_lookup instead. **/ struct scsi_device *__scsi_device_lookup(struct Scsi_Host *shost, @@ -1033,9 +1042,9 @@ EXPORT_SYMBOL(__scsi_device_lookup); * @id: SCSI target number (physical unit number) * @lun: SCSI Logical Unit Number * - * Looks up the scsi_device with the specified @channel, @id, @lun for a - * give host. The returned scsi_device has an additional reference that - * needs to be release with scsi_host_put once you're done with it. + * Description: Looks up the scsi_device with the specified @channel, @id, @lun + * for a given host. The returned scsi_device has an additional reference that + * needs to be released with scsi_device_put once you're done with it. **/ struct scsi_device *scsi_device_lookup(struct Scsi_Host *shost, uint channel, uint id, uint lun) diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c index 348cc5a6e3cd..6839c1004b29 100644 --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -276,11 +276,12 @@ static void scsi_strcpy_devinfo(char *name, char *to, size_t to_length, } /** - * scsi_dev_info_list_add: add one dev_info list entry. + * scsi_dev_info_list_add - add one dev_info list entry. + * @compatible: if true, null terminate short strings. Otherwise space pad. * @vendor: vendor string * @model: model (product) string * @strflags: integer string - * @flag: if strflags NULL, use this flag value + * @flags: if strflags NULL, use this flag value * * Description: * Create and add one dev_info entry for @vendor, @model, @strflags or @@ -322,8 +323,7 @@ static int scsi_dev_info_list_add(int compatible, char *vendor, char *model, } /** - * scsi_dev_info_list_add_str: parse dev_list and add to the - * scsi_dev_info_list. + * scsi_dev_info_list_add_str - parse dev_list and add to the scsi_dev_info_list. * @dev_list: string of device flags to add * * Description: @@ -374,15 +374,15 @@ static int scsi_dev_info_list_add_str(char *dev_list) } /** - * get_device_flags - get device specific flags from the dynamic device - * list. Called during scan time. + * get_device_flags - get device specific flags from the dynamic device list. + * @sdev: &scsi_device to get flags for * @vendor: vendor name * @model: model name * * Description: * Search the scsi_dev_info_list for an entry matching @vendor and * @model, if found, return the matching flags value, else return - * the host or global default settings. + * the host or global default settings. Called during scan time. **/ int scsi_get_device_flags(struct scsi_device *sdev, const unsigned char *vendor, @@ -483,13 +483,11 @@ stop_output: } /* - * proc_scsi_dev_info_write: allow additions to the scsi_dev_info_list via - * /proc. + * proc_scsi_dev_info_write - allow additions to scsi_dev_info_list via /proc. * - * Use: echo "vendor:model:flag" > /proc/scsi/device_info - * - * To add a black/white list entry for vendor and model with an integer - * value of flag to the scsi device info list. + * Description: Adds a black/white list entry for vendor and model with an + * integer value of flag to the scsi device info list. + * To use, echo "vendor:model:flag" > /proc/scsi/device_info */ static int proc_scsi_devinfo_write(struct file *file, const char __user *buf, unsigned long length, void *data) @@ -532,8 +530,7 @@ MODULE_PARM_DESC(default_dev_flags, "scsi default device flag integer value"); /** - * scsi_dev_info_list_delete: called from scsi.c:exit_scsi to remove - * the scsi_dev_info_list. + * scsi_dev_info_list_delete - called from scsi.c:exit_scsi to remove the scsi_dev_info_list. **/ void scsi_exit_devinfo(void) { @@ -552,13 +549,12 @@ void scsi_exit_devinfo(void) } /** - * scsi_dev_list_init: set up the dynamic device list. - * @dev_list: string of device flags to add + * scsi_dev_list_init - set up the dynamic device list. * * Description: - * Add command line @dev_list entries, then add + * Add command line entries from scsi_dev_flags, then add * scsi_static_device_list entries to the scsi device info list. - **/ + */ int __init scsi_init_devinfo(void) { #ifdef CONFIG_SCSI_PROC_FS diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index ebaca4ca4a13..22f8140598ba 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -779,7 +779,7 @@ static int scsi_request_sense(struct scsi_cmnd *scmd) * Notes: * We don't want to use the normal command completion while we are are * still handling errors - it may cause other commands to be queued, - * and that would disturb what we are doing. thus we really want to + * and that would disturb what we are doing. Thus we really want to * keep a list of pending commands for final completion, and once we * are ready to leave error handling we handle completion for real. **/ @@ -794,7 +794,7 @@ EXPORT_SYMBOL(scsi_eh_finish_cmd); /** * scsi_eh_get_sense - Get device sense data. * @work_q: Queue of commands to process. - * @done_q: Queue of proccessed commands.. + * @done_q: Queue of processed commands. * * Description: * See if we need to request sense information. if so, then get it @@ -802,7 +802,7 @@ EXPORT_SYMBOL(scsi_eh_finish_cmd); * * Notes: * This has the unfortunate side effect that if a shost adapter does - * not automatically request sense information, that we end up shutting + * not automatically request sense information, we end up shutting * it down before we request it. * * All drivers should request sense information internally these days, @@ -858,7 +858,7 @@ EXPORT_SYMBOL_GPL(scsi_eh_get_sense); /** * scsi_eh_tur - Send TUR to device. - * @scmd: Scsi cmd to send TUR + * @scmd: &scsi_cmnd to send TUR * * Return value: * 0 - Device is ready. 1 - Device NOT ready. @@ -887,14 +887,14 @@ retry_tur: } /** - * scsi_eh_abort_cmds - abort canceled commands. - * @shost: scsi host being recovered. - * @eh_done_q: list_head for processed commands. + * scsi_eh_abort_cmds - abort pending commands. + * @work_q: &list_head for pending commands. + * @done_q: &list_head for processed commands. * * Decription: * Try and see whether or not it makes sense to try and abort the - * running command. this only works out to be the case if we have one - * command that has timed out. if the command simply failed, it makes + * running command. This only works out to be the case if we have one + * command that has timed out. If the command simply failed, it makes * no sense to try and abort the command, since as far as the shost * adapter is concerned, it isn't running. **/ @@ -931,7 +931,7 @@ static int scsi_eh_abort_cmds(struct list_head *work_q, /** * scsi_eh_try_stu - Send START_UNIT to device. - * @scmd: Scsi cmd to send START_UNIT + * @scmd: &scsi_cmnd to send START_UNIT * * Return value: * 0 - Device is ready. 1 - Device NOT ready. @@ -956,8 +956,9 @@ static int scsi_eh_try_stu(struct scsi_cmnd *scmd) /** * scsi_eh_stu - send START_UNIT if needed - * @shost: scsi host being recovered. - * @eh_done_q: list_head for processed commands. + * @shost: &scsi host being recovered. + * @work_q: &list_head for pending commands. + * @done_q: &list_head for processed commands. * * Notes: * If commands are failing due to not ready, initializing command required, @@ -1008,10 +1009,11 @@ static int scsi_eh_stu(struct Scsi_Host *shost, /** * scsi_eh_bus_device_reset - send bdr if needed * @shost: scsi host being recovered. - * @eh_done_q: list_head for processed commands. + * @work_q: &list_head for pending commands. + * @done_q: &list_head for processed commands. * * Notes: - * Try a bus device reset. still, look to see whether we have multiple + * Try a bus device reset. Still, look to see whether we have multiple * devices that are jammed or not - if we have multiple devices, it * makes no sense to try bus_device_reset - we really would need to try * a bus_reset instead. @@ -1063,8 +1065,9 @@ static int scsi_eh_bus_device_reset(struct Scsi_Host *shost, /** * scsi_eh_bus_reset - send a bus reset - * @shost: scsi host being recovered. - * @eh_done_q: list_head for processed commands. + * @shost: &scsi host being recovered. + * @work_q: &list_head for pending commands. + * @done_q: &list_head for processed commands. **/ static int scsi_eh_bus_reset(struct Scsi_Host *shost, struct list_head *work_q, @@ -1440,7 +1443,8 @@ static void scsi_restart_operations(struct Scsi_Host *shost) /** * scsi_eh_ready_devs - check device ready state and recover if not. * @shost: host to be recovered. - * @eh_done_q: list_head for processed commands. + * @work_q: &list_head for pending commands. + * @done_q: &list_head for processed commands. * **/ void scsi_eh_ready_devs(struct Scsi_Host *shost, @@ -1824,9 +1828,7 @@ int scsi_command_normalize_sense(struct scsi_cmnd *cmd, EXPORT_SYMBOL(scsi_command_normalize_sense); /** - * scsi_sense_desc_find - search for a given descriptor type in - * descriptor sense data format. - * + * scsi_sense_desc_find - search for a given descriptor type in descriptor sense data format. * @sense_buffer: byte array of descriptor format sense data * @sb_len: number of valid bytes in sense_buffer * @desc_type: value of descriptor type to find @@ -1865,9 +1867,7 @@ const u8 * scsi_sense_desc_find(const u8 * sense_buffer, int sb_len, EXPORT_SYMBOL(scsi_sense_desc_find); /** - * scsi_get_sense_info_fld - attempts to get information field from - * sense data (either fixed or descriptor format) - * + * scsi_get_sense_info_fld - get information field from sense data (either fixed or descriptor format) * @sense_buffer: byte array of sense data * @sb_len: number of valid bytes in sense_buffer * @info_out: pointer to 64 integer where 8 or 4 byte information diff --git a/drivers/scsi/scsi_ioctl.c b/drivers/scsi/scsi_ioctl.c index 32293f451669..83e144716901 100644 --- a/drivers/scsi/scsi_ioctl.c +++ b/drivers/scsi/scsi_ioctl.c @@ -174,10 +174,15 @@ static int scsi_ioctl_get_pci(struct scsi_device *sdev, void __user *arg) } -/* - * the scsi_ioctl() function differs from most ioctls in that it does - * not take a major/minor number as the dev field. Rather, it takes - * a pointer to a scsi_devices[] element, a structure. +/** + * scsi_ioctl - Dispatch ioctl to scsi device + * @sdev: scsi device receiving ioctl + * @cmd: which ioctl is it + * @arg: data associated with ioctl + * + * Description: The scsi_ioctl() function differs from most ioctls in that it + * does not take a major/minor number as the dev field. Rather, it takes + * a pointer to a &struct scsi_device. */ int scsi_ioctl(struct scsi_device *sdev, int cmd, void __user *arg) { @@ -264,9 +269,12 @@ int scsi_ioctl(struct scsi_device *sdev, int cmd, void __user *arg) } EXPORT_SYMBOL(scsi_ioctl); -/* - * the scsi_nonblock_ioctl() function is designed for ioctls which may - * be executed even if the device is in recovery. +/** + * scsi_nonblock_ioctl() - Handle SG_SCSI_RESET + * @sdev: scsi device receiving ioctl + * @cmd: Must be SC_SCSI_RESET + * @arg: pointer to int containing SG_SCSI_RESET_{DEVICE,BUS,HOST} + * @filp: either NULL or a &struct file which must have the O_NONBLOCK flag. */ int scsi_nonblockable_ioctl(struct scsi_device *sdev, int cmd, void __user *arg, struct file *filp) @@ -276,7 +284,7 @@ int scsi_nonblockable_ioctl(struct scsi_device *sdev, int cmd, /* The first set of iocts may be executed even if we're doing * error processing, as long as the device was opened * non-blocking */ - if (filp && filp->f_flags & O_NONBLOCK) { + if (filp && (filp->f_flags & O_NONBLOCK)) { if (scsi_host_in_recovery(sdev->host)) return -ENODEV; } else if (!scsi_block_when_processing_errors(sdev)) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index a9ac5b1b1667..199b02452259 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -175,7 +175,7 @@ int scsi_queue_insert(struct scsi_cmnd *cmd, int reason) * * returns the req->errors value which is the scsi_cmnd result * field. - **/ + */ int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd, int data_direction, void *buffer, unsigned bufflen, unsigned char *sense, int timeout, int retries, int flags) @@ -274,7 +274,7 @@ static void scsi_bi_endio(struct bio *bio, int error) /** * scsi_req_map_sg - map a scatterlist into a request * @rq: request to fill - * @sg: scatterlist + * @sgl: scatterlist * @nsegs: number of elements * @bufflen: len of buffer * @gfp: memory allocation flags @@ -365,14 +365,16 @@ free_bios: * @sdev: scsi device * @cmd: scsi command * @cmd_len: length of scsi cdb - * @data_direction: data direction + * @data_direction: DMA_TO_DEVICE, DMA_FROM_DEVICE, or DMA_NONE * @buffer: data buffer (this can be a kernel buffer or scatterlist) * @bufflen: len of buffer * @use_sg: if buffer is a scatterlist this is the number of elements * @timeout: request timeout in seconds * @retries: number of times to retry request - * @flags: or into request flags - **/ + * @privdata: data passed to done() + * @done: callback function when done + * @gfp: memory allocation flags + */ int scsi_execute_async(struct scsi_device *sdev, const unsigned char *cmd, int cmd_len, int data_direction, void *buffer, unsigned bufflen, int use_sg, int timeout, int retries, void *privdata, @@ -1804,7 +1806,7 @@ void scsi_exit_queue(void) * @timeout: command timeout * @retries: number of retries before failing * @data: returns a structure abstracting the mode header data - * @sense: place to put sense data (or NULL if no sense to be collected). + * @sshdr: place to put sense data (or NULL if no sense to be collected). * must be SCSI_SENSE_BUFFERSIZE big. * * Returns zero if successful; negative error number or scsi @@ -1871,8 +1873,7 @@ scsi_mode_select(struct scsi_device *sdev, int pf, int sp, int modepage, EXPORT_SYMBOL_GPL(scsi_mode_select); /** - * scsi_mode_sense - issue a mode sense, falling back from 10 to - * six bytes if necessary. + * scsi_mode_sense - issue a mode sense, falling back from 10 to six bytes if necessary. * @sdev: SCSI device to be queried * @dbd: set if mode sense will allow block descriptors to be returned * @modepage: mode page being requested @@ -1881,13 +1882,13 @@ EXPORT_SYMBOL_GPL(scsi_mode_select); * @timeout: command timeout * @retries: number of retries before failing * @data: returns a structure abstracting the mode header data - * @sense: place to put sense data (or NULL if no sense to be collected). + * @sshdr: place to put sense data (or NULL if no sense to be collected). * must be SCSI_SENSE_BUFFERSIZE big. * * Returns zero if unsuccessful, or the header offset (either 4 * or 8 depending on whether a six or ten byte command was * issued) if successful. - **/ + */ int scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage, unsigned char *buffer, int len, int timeout, int retries, @@ -2007,14 +2008,13 @@ scsi_test_unit_ready(struct scsi_device *sdev, int timeout, int retries) EXPORT_SYMBOL(scsi_test_unit_ready); /** - * scsi_device_set_state - Take the given device through the device - * state model. + * scsi_device_set_state - Take the given device through the device state model. * @sdev: scsi device to change the state of. * @state: state to change to. * * Returns zero if unsuccessful or an error if the requested * transition is illegal. - **/ + */ int scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state) { @@ -2264,7 +2264,7 @@ EXPORT_SYMBOL_GPL(sdev_evt_send_simple); * Must be called with user context, may sleep. * * Returns zero if unsuccessful or an error if not. - **/ + */ int scsi_device_quiesce(struct scsi_device *sdev) { @@ -2289,7 +2289,7 @@ EXPORT_SYMBOL(scsi_device_quiesce); * queues. * * Must be called with user context, may sleep. - **/ + */ void scsi_device_resume(struct scsi_device *sdev) { @@ -2326,8 +2326,7 @@ scsi_target_resume(struct scsi_target *starget) EXPORT_SYMBOL(scsi_target_resume); /** - * scsi_internal_device_block - internal function to put a device - * temporarily into the SDEV_BLOCK state + * scsi_internal_device_block - internal function to put a device temporarily into the SDEV_BLOCK state * @sdev: device to block * * Block request made by scsi lld's to temporarily stop all @@ -2342,7 +2341,7 @@ EXPORT_SYMBOL(scsi_target_resume); * state, all commands are deferred until the scsi lld reenables * the device with scsi_device_unblock or device_block_tmo fires. * This routine assumes the host_lock is held on entry. - **/ + */ int scsi_internal_device_block(struct scsi_device *sdev) { @@ -2382,7 +2381,7 @@ EXPORT_SYMBOL_GPL(scsi_internal_device_block); * (which must be a legal transition) allowing the midlayer to * goose the queue for this device. This routine assumes the * host_lock is held upon entry. - **/ + */ int scsi_internal_device_unblock(struct scsi_device *sdev) { @@ -2460,7 +2459,7 @@ EXPORT_SYMBOL_GPL(scsi_target_unblock); /** * scsi_kmap_atomic_sg - find and atomically map an sg-elemnt - * @sg: scatter-gather list + * @sgl: scatter-gather list * @sg_count: number of segments in sg * @offset: offset in bytes into sg, on return offset into the mapped area * @len: bytes to map, on return number of bytes mapped @@ -2509,8 +2508,7 @@ void *scsi_kmap_atomic_sg(struct scatterlist *sgl, int sg_count, EXPORT_SYMBOL(scsi_kmap_atomic_sg); /** - * scsi_kunmap_atomic_sg - atomically unmap a virtual address, previously - * mapped with scsi_kmap_atomic_sg + * scsi_kunmap_atomic_sg - atomically unmap a virtual address, previously mapped with scsi_kmap_atomic_sg * @virt: virtual address to be unmapped */ void scsi_kunmap_atomic_sg(void *virt) diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c index 40579edca101..3e1591828171 100644 --- a/drivers/scsi/scsi_netlink.c +++ b/drivers/scsi/scsi_netlink.c @@ -32,11 +32,12 @@ EXPORT_SYMBOL_GPL(scsi_nl_sock); /** - * scsi_nl_rcv_msg - - * Receive message handler. Extracts message from a receive buffer. + * scsi_nl_rcv_msg - Receive message handler. + * @skb: socket receive buffer + * + * Description: Extracts message from a receive buffer. * Validates message header and calls appropriate transport message handler * - * @skb: socket receive buffer * **/ static void @@ -99,9 +100,7 @@ next_msg: /** - * scsi_nl_rcv_event - - * Event handler for a netlink socket. - * + * scsi_nl_rcv_event - Event handler for a netlink socket. * @this: event notifier block * @event: event type * @ptr: event payload @@ -129,9 +128,7 @@ static struct notifier_block scsi_netlink_notifier = { /** - * scsi_netlink_init - - * Called by SCSI subsystem to intialize the SCSI transport netlink - * interface + * scsi_netlink_init - Called by SCSI subsystem to intialize the SCSI transport netlink interface * **/ void @@ -160,9 +157,7 @@ scsi_netlink_init(void) /** - * scsi_netlink_exit - - * Called by SCSI subsystem to disable the SCSI transport netlink - * interface + * scsi_netlink_exit - Called by SCSI subsystem to disable the SCSI transport netlink interface * **/ void diff --git a/drivers/scsi/scsi_proc.c b/drivers/scsi/scsi_proc.c index bb6f051beda8..ed395154a5b1 100644 --- a/drivers/scsi/scsi_proc.c +++ b/drivers/scsi/scsi_proc.c @@ -45,6 +45,16 @@ static struct proc_dir_entry *proc_scsi; /* Protect sht->present and sht->proc_dir */ static DEFINE_MUTEX(global_host_template_mutex); +/** + * proc_scsi_read - handle read from /proc by calling host's proc_info() command + * @buffer: passed to proc_info + * @start: passed to proc_info + * @offset: passed to proc_info + * @length: passed to proc_info + * @eof: returns whether length read was less than requested + * @data: pointer to a &struct Scsi_Host + */ + static int proc_scsi_read(char *buffer, char **start, off_t offset, int length, int *eof, void *data) { @@ -57,6 +67,13 @@ static int proc_scsi_read(char *buffer, char **start, off_t offset, return n; } +/** + * proc_scsi_write_proc - Handle write to /proc by calling host's proc_info() + * @file: not used + * @buf: source of data to write. + * @count: number of bytes (at most PROC_BLOCK_SIZE) to write. + * @data: pointer to &struct Scsi_Host + */ static int proc_scsi_write_proc(struct file *file, const char __user *buf, unsigned long count, void *data) { @@ -80,6 +97,13 @@ out: return ret; } +/** + * scsi_proc_hostdir_add - Create directory in /proc for a scsi host + * @sht: owner of this directory + * + * Sets sht->proc_dir to the new directory. + */ + void scsi_proc_hostdir_add(struct scsi_host_template *sht) { if (!sht->proc_info) @@ -97,6 +121,10 @@ void scsi_proc_hostdir_add(struct scsi_host_template *sht) mutex_unlock(&global_host_template_mutex); } +/** + * scsi_proc_hostdir_rm - remove directory in /proc for a scsi host + * @sht: owner of directory + */ void scsi_proc_hostdir_rm(struct scsi_host_template *sht) { if (!sht->proc_info) @@ -110,6 +138,11 @@ void scsi_proc_hostdir_rm(struct scsi_host_template *sht) mutex_unlock(&global_host_template_mutex); } + +/** + * scsi_proc_host_add - Add entry for this host to appropriate /proc dir + * @shost: host to add + */ void scsi_proc_host_add(struct Scsi_Host *shost) { struct scsi_host_template *sht = shost->hostt; @@ -133,6 +166,10 @@ void scsi_proc_host_add(struct Scsi_Host *shost) p->owner = sht->module; } +/** + * scsi_proc_host_rm - remove this host's entry from /proc + * @shost: which host + */ void scsi_proc_host_rm(struct Scsi_Host *shost) { char name[10]; @@ -143,7 +180,14 @@ void scsi_proc_host_rm(struct Scsi_Host *shost) sprintf(name,"%d", shost->host_no); remove_proc_entry(name, shost->hostt->proc_dir); } - +/** + * proc_print_scsidevice - return data about this host + * @dev: A scsi device + * @data: &struct seq_file to output to. + * + * Description: prints Host, Channel, Id, Lun, Vendor, Model, Rev, Type, + * and revision. + */ static int proc_print_scsidevice(struct device *dev, void *data) { struct scsi_device *sdev = to_scsi_device(dev); @@ -189,6 +233,21 @@ static int proc_print_scsidevice(struct device *dev, void *data) return 0; } +/** + * scsi_add_single_device - Respond to user request to probe for/add device + * @host: user-supplied decimal integer + * @channel: user-supplied decimal integer + * @id: user-supplied decimal integer + * @lun: user-supplied decimal integer + * + * Description: called by writing "scsi add-single-device" to /proc/scsi/scsi. + * + * does scsi_host_lookup() and either user_scan() if that transport + * type supports it, or else scsi_scan_host_selected() + * + * Note: this seems to be aimed exclusively at SCSI parallel busses. + */ + static int scsi_add_single_device(uint host, uint channel, uint id, uint lun) { struct Scsi_Host *shost; @@ -206,6 +265,16 @@ static int scsi_add_single_device(uint host, uint channel, uint id, uint lun) return error; } +/** + * scsi_remove_single_device - Respond to user request to remove a device + * @host: user-supplied decimal integer + * @channel: user-supplied decimal integer + * @id: user-supplied decimal integer + * @lun: user-supplied decimal integer + * + * Description: called by writing "scsi remove-single-device" to + * /proc/scsi/scsi. Does a scsi_device_lookup() and scsi_remove_device() + */ static int scsi_remove_single_device(uint host, uint channel, uint id, uint lun) { struct scsi_device *sdev; @@ -226,6 +295,25 @@ static int scsi_remove_single_device(uint host, uint channel, uint id, uint lun) return error; } +/** + * proc_scsi_write - handle writes to /proc/scsi/scsi + * @file: not used + * @buf: buffer to write + * @length: length of buf, at most PAGE_SIZE + * @ppos: not used + * + * Description: this provides a legacy mechanism to add or remove devices by + * Host, Channel, ID, and Lun. To use, + * "echo 'scsi add-single-device 0 1 2 3' > /proc/scsi/scsi" or + * "echo 'scsi remove-single-device 0 1 2 3' > /proc/scsi/scsi" with + * "0 1 2 3" replaced by the Host, Channel, Id, and Lun. + * + * Note: this seems to be aimed at parallel SCSI. Most modern busses (USB, + * SATA, Firewire, Fibre Channel, etc) dynamically assign these values to + * provide a unique identifier and nothing more. + */ + + static ssize_t proc_scsi_write(struct file *file, const char __user *buf, size_t length, loff_t *ppos) { @@ -291,6 +379,11 @@ static ssize_t proc_scsi_write(struct file *file, const char __user *buf, return err; } +/** + * proc_scsi_show - show contents of /proc/scsi/scsi (attached devices) + * @s: output goes here + * @p: not used + */ static int proc_scsi_show(struct seq_file *s, void *p) { seq_printf(s, "Attached devices:\n"); @@ -298,10 +391,17 @@ static int proc_scsi_show(struct seq_file *s, void *p) return 0; } +/** + * proc_scsi_open - glue function + * @inode: not used + * @file: passed to single_open() + * + * Associates proc_scsi_show with this file + */ static int proc_scsi_open(struct inode *inode, struct file *file) { /* - * We don't really needs this for the write case but it doesn't + * We don't really need this for the write case but it doesn't * harm either. */ return single_open(file, proc_scsi_show, NULL); @@ -315,6 +415,9 @@ static const struct file_operations proc_scsi_operations = { .release = single_release, }; +/** + * scsi_init_procfs - create scsi and scsi/scsi in procfs + */ int __init scsi_init_procfs(void) { struct proc_dir_entry *pde; @@ -336,6 +439,9 @@ err1: return -ENOMEM; } +/** + * scsi_exit_procfs - Remove scsi/scsi and scsi from procfs + */ void scsi_exit_procfs(void) { remove_proc_entry("scsi/scsi", NULL); diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 40ea71cd2ca6..7e8b2045ccfa 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -221,6 +221,9 @@ static void scsi_unlock_floptical(struct scsi_device *sdev, /** * scsi_alloc_sdev - allocate and setup a scsi_Device + * @starget: which target to allocate a &scsi_device for + * @lun: which lun + * @hostdata: usually NULL and set by ->slave_alloc instead * * Description: * Allocate, initialize for io, and return a pointer to a scsi_Device. @@ -472,7 +475,6 @@ static void scsi_target_reap_usercontext(struct work_struct *work) /** * scsi_target_reap - check to see if target is in use and destroy if not - * * @starget: target to be checked * * This is used after removing a LUN or doing a last put of the target @@ -928,8 +930,7 @@ static inline void scsi_destroy_sdev(struct scsi_device *sdev) #ifdef CONFIG_SCSI_LOGGING /** - * scsi_inq_str - print INQUIRY data from min to max index, - * strip trailing whitespace + * scsi_inq_str - print INQUIRY data from min to max index, strip trailing whitespace * @buf: Output buffer with at least end-first+1 bytes of space * @inq: Inquiry buffer (input) * @first: Offset of string into inq @@ -957,9 +958,10 @@ static unsigned char *scsi_inq_str(unsigned char *buf, unsigned char *inq, * scsi_probe_and_add_lun - probe a LUN, if a LUN is found add it * @starget: pointer to target device structure * @lun: LUN of target device - * @sdevscan: probe the LUN corresponding to this scsi_device - * @sdevnew: store the value of any new scsi_device allocated * @bflagsp: store bflags here if not NULL + * @sdevp: probe the LUN corresponding to this scsi_device + * @rescan: if nonzero skip some code only needed on first scan + * @hostdata: passed to scsi_alloc_sdev() * * Description: * Call scsi_probe_lun, if a LUN with an attached device is found, @@ -1110,6 +1112,8 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget, * scsi_sequential_lun_scan - sequentially scan a SCSI target * @starget: pointer to target structure to scan * @bflags: black/white list flag for LUN 0 + * @scsi_level: Which version of the standard does this device adhere to + * @rescan: passed to scsi_probe_add_lun() * * Description: * Generally, scan from LUN 1 (LUN 0 is assumed to already have been @@ -1220,7 +1224,7 @@ EXPORT_SYMBOL(scsilun_to_int); /** * int_to_scsilun: reverts an int into a scsi_lun - * @int: integer to be reverted + * @lun: integer to be reverted * @scsilun: struct scsi_lun to be set. * * Description: @@ -1252,18 +1256,22 @@ EXPORT_SYMBOL(int_to_scsilun); /** * scsi_report_lun_scan - Scan using SCSI REPORT LUN results - * @sdevscan: scan the host, channel, and id of this scsi_device + * @starget: which target + * @bflags: Zero or a mix of BLIST_NOLUN, BLIST_REPORTLUN2, or BLIST_NOREPORTLUN + * @rescan: nonzero if we can skip code only needed on first scan * * Description: - * If @sdevscan is for a SCSI-3 or up device, send a REPORT LUN - * command, and scan the resulting list of LUNs by calling - * scsi_probe_and_add_lun. + * Fast scanning for modern (SCSI-3) devices by sending a REPORT LUN command. + * Scan the resulting list of LUNs by calling scsi_probe_and_add_lun. * - * Modifies sdevscan->lun. + * If BLINK_REPORTLUN2 is set, scan a target that supports more than 8 + * LUNs even if it's older than SCSI-3. + * If BLIST_NOREPORTLUN is set, return 1 always. + * If BLIST_NOLUN is set, return 0 always. * * Return: * 0: scan completed (or no memory, so further scanning is futile) - * 1: no report lun scan, or not configured + * 1: could not scan with REPORT LUN **/ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags, int rescan) diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 7a7cfe583b2a..b1119da6e88c 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -481,9 +481,9 @@ MODULE_PARM_DESC(dev_loss_tmo, " exceeded, the scsi target is removed. Value should be" " between 1 and SCSI_DEVICE_BLOCK_MAX_TIMEOUT."); -/** +/* * Netlink Infrastructure - **/ + */ static atomic_t fc_event_seq; @@ -491,10 +491,10 @@ static atomic_t fc_event_seq; * fc_get_event_number - Obtain the next sequential FC event number * * Notes: - * We could have inline'd this, but it would have required fc_event_seq to + * We could have inlined this, but it would have required fc_event_seq to * be exposed. For now, live with the subroutine call. * Atomic used to avoid lock/unlock... - **/ + */ u32 fc_get_event_number(void) { @@ -505,7 +505,6 @@ EXPORT_SYMBOL(fc_get_event_number); /** * fc_host_post_event - called to post an even on an fc_host. - * * @shost: host the event occurred on * @event_number: fc event number obtained from get_fc_event_number() * @event_code: fc_host event being posted @@ -513,7 +512,7 @@ EXPORT_SYMBOL(fc_get_event_number); * * Notes: * This routine assumes no locks are held on entry. - **/ + */ void fc_host_post_event(struct Scsi_Host *shost, u32 event_number, enum fc_host_event_code event_code, u32 event_data) @@ -579,17 +578,16 @@ EXPORT_SYMBOL(fc_host_post_event); /** - * fc_host_post_vendor_event - called to post a vendor unique event on - * a fc_host - * + * fc_host_post_vendor_event - called to post a vendor unique event on an fc_host * @shost: host the event occurred on * @event_number: fc event number obtained from get_fc_event_number() * @data_len: amount, in bytes, of vendor unique data * @data_buf: pointer to vendor unique data + * @vendor_id: Vendor id * * Notes: * This routine assumes no locks are held on entry. - **/ + */ void fc_host_post_vendor_event(struct Scsi_Host *shost, u32 event_number, u32 data_len, char * data_buf, u64 vendor_id) @@ -1900,7 +1898,6 @@ static int fc_vport_match(struct attribute_container *cont, /** * fc_timed_out - FC Transport I/O timeout intercept handler - * * @scmd: The SCSI command which timed out * * This routine protects against error handlers getting invoked while a @@ -1920,7 +1917,7 @@ static int fc_vport_match(struct attribute_container *cont, * * Notes: * This routine assumes no locks are held on entry. - **/ + */ static enum scsi_eh_timer_return fc_timed_out(struct scsi_cmnd *scmd) { @@ -2133,7 +2130,7 @@ EXPORT_SYMBOL(fc_release_transport); * 1 - work queued for execution * 0 - work is already queued * -EINVAL - work queue doesn't exist - **/ + */ static int fc_queue_work(struct Scsi_Host *shost, struct work_struct *work) { @@ -2152,7 +2149,7 @@ fc_queue_work(struct Scsi_Host *shost, struct work_struct *work) /** * fc_flush_work - Flush a fc_host's workqueue. * @shost: Pointer to Scsi_Host bound to fc_host. - **/ + */ static void fc_flush_work(struct Scsi_Host *shost) { @@ -2175,7 +2172,7 @@ fc_flush_work(struct Scsi_Host *shost) * * Return value: * 1 on success / 0 already queued / < 0 for error - **/ + */ static int fc_queue_devloss_work(struct Scsi_Host *shost, struct delayed_work *work, unsigned long delay) @@ -2195,7 +2192,7 @@ fc_queue_devloss_work(struct Scsi_Host *shost, struct delayed_work *work, /** * fc_flush_devloss - Flush a fc_host's devloss workqueue. * @shost: Pointer to Scsi_Host bound to fc_host. - **/ + */ static void fc_flush_devloss(struct Scsi_Host *shost) { @@ -2212,21 +2209,20 @@ fc_flush_devloss(struct Scsi_Host *shost) /** - * fc_remove_host - called to terminate any fc_transport-related elements - * for a scsi host. - * @rport: remote port to be unblocked. + * fc_remove_host - called to terminate any fc_transport-related elements for a scsi host. + * @shost: Which &Scsi_Host * * This routine is expected to be called immediately preceeding the * a driver's call to scsi_remove_host(). * * WARNING: A driver utilizing the fc_transport, which fails to call - * this routine prior to scsi_remote_host(), will leave dangling + * this routine prior to scsi_remove_host(), will leave dangling * objects in /sys/class/fc_remote_ports. Access to any of these * objects can result in a system crash !!! * * Notes: * This routine assumes no locks are held on entry. - **/ + */ void fc_remove_host(struct Scsi_Host *shost) { @@ -2281,10 +2277,10 @@ EXPORT_SYMBOL(fc_remove_host); /** * fc_starget_delete - called to delete the scsi decendents of an rport - * (target and all sdevs) - * * @work: remote port to be operated on. - **/ + * + * Deletes target and all sdevs. + */ static void fc_starget_delete(struct work_struct *work) { @@ -2303,9 +2299,8 @@ fc_starget_delete(struct work_struct *work) /** * fc_rport_final_delete - finish rport termination and delete it. - * * @work: remote port to be deleted. - **/ + */ static void fc_rport_final_delete(struct work_struct *work) { @@ -2375,7 +2370,7 @@ fc_rport_final_delete(struct work_struct *work) * * Notes: * This routine assumes no locks are held on entry. - **/ + */ static struct fc_rport * fc_rport_create(struct Scsi_Host *shost, int channel, struct fc_rport_identifiers *ids) @@ -2462,8 +2457,7 @@ delete_rport: } /** - * fc_remote_port_add - notifies the fc transport of the existence - * of a remote FC port. + * fc_remote_port_add - notify fc transport of the existence of a remote FC port. * @shost: scsi host the remote port is connected to. * @channel: Channel on shost port connected to. * @ids: The world wide names, fc address, and FC4 port @@ -2499,7 +2493,7 @@ delete_rport: * * Notes: * This routine assumes no locks are held on entry. - **/ + */ struct fc_rport * fc_remote_port_add(struct Scsi_Host *shost, int channel, struct fc_rport_identifiers *ids) @@ -2683,19 +2677,18 @@ EXPORT_SYMBOL(fc_remote_port_add); /** - * fc_remote_port_delete - notifies the fc transport that a remote - * port is no longer in existence. + * fc_remote_port_delete - notifies the fc transport that a remote port is no longer in existence. * @rport: The remote port that no longer exists * * The LLDD calls this routine to notify the transport that a remote * port is no longer part of the topology. Note: Although a port * may no longer be part of the topology, it may persist in the remote * ports displayed by the fc_host. We do this under 2 conditions: - * - If the port was a scsi target, we delay its deletion by "blocking" it. + * 1) If the port was a scsi target, we delay its deletion by "blocking" it. * This allows the port to temporarily disappear, then reappear without * disrupting the SCSI device tree attached to it. During the "blocked" * period the port will still exist. - * - If the port was a scsi target and disappears for longer than we + * 2) If the port was a scsi target and disappears for longer than we * expect, we'll delete the port and the tear down the SCSI device tree * attached to it. However, we want to semi-persist the target id assigned * to that port if it eventually does exist. The port structure will @@ -2709,7 +2702,8 @@ EXPORT_SYMBOL(fc_remote_port_add); * temporary blocked state. From the LLDD's perspective, the rport no * longer exists. From the SCSI midlayer's perspective, the SCSI target * exists, but all sdevs on it are blocked from further I/O. The following - * is then expected: + * is then expected. + * * If the remote port does not return (signaled by a LLDD call to * fc_remote_port_add()) within the dev_loss_tmo timeout, then the * scsi target is removed - killing all outstanding i/o and removing the @@ -2731,7 +2725,7 @@ EXPORT_SYMBOL(fc_remote_port_add); * * Notes: * This routine assumes no locks are held on entry. - **/ + */ void fc_remote_port_delete(struct fc_rport *rport) { @@ -2792,12 +2786,12 @@ fc_remote_port_delete(struct fc_rport *rport) EXPORT_SYMBOL(fc_remote_port_delete); /** - * fc_remote_port_rolechg - notifies the fc transport that the roles - * on a remote may have changed. + * fc_remote_port_rolechg - notifies the fc transport that the roles on a remote may have changed. * @rport: The remote port that changed. + * @roles: New roles for this port. * - * The LLDD calls this routine to notify the transport that the roles - * on a remote port may have changed. The largest effect of this is + * Description: The LLDD calls this routine to notify the transport that the + * roles on a remote port may have changed. The largest effect of this is * if a port now becomes a FCP Target, it must be allocated a * scsi target id. If the port is no longer a FCP target, any * scsi target id value assigned to it will persist in case the @@ -2810,7 +2804,7 @@ EXPORT_SYMBOL(fc_remote_port_delete); * * Notes: * This routine assumes no locks are held on entry. - **/ + */ void fc_remote_port_rolechg(struct fc_rport *rport, u32 roles) { @@ -2875,12 +2869,12 @@ fc_remote_port_rolechg(struct fc_rport *rport, u32 roles) EXPORT_SYMBOL(fc_remote_port_rolechg); /** - * fc_timeout_deleted_rport - Timeout handler for a deleted remote port, - * which we blocked, and has now failed to return - * in the allotted time. - * + * fc_timeout_deleted_rport - Timeout handler for a deleted remote port. * @work: rport target that failed to reappear in the allotted time. - **/ + * + * Description: An attempt to delete a remote port blocks, and if it fails + * to return in the allotted time this gets called. + */ static void fc_timeout_deleted_rport(struct work_struct *work) { @@ -2984,14 +2978,12 @@ fc_timeout_deleted_rport(struct work_struct *work) } /** - * fc_timeout_fail_rport_io - Timeout handler for a fast io failing on a - * disconnected SCSI target. - * + * fc_timeout_fail_rport_io - Timeout handler for a fast io failing on a disconnected SCSI target. * @work: rport to terminate io on. * * Notes: Only requests the failure of the io, not that all are flushed * prior to returning. - **/ + */ static void fc_timeout_fail_rport_io(struct work_struct *work) { @@ -3008,9 +3000,8 @@ fc_timeout_fail_rport_io(struct work_struct *work) /** * fc_scsi_scan_rport - called to perform a scsi scan on a remote port. - * * @work: remote port to be scanned. - **/ + */ static void fc_scsi_scan_rport(struct work_struct *work) { @@ -3047,7 +3038,7 @@ fc_scsi_scan_rport(struct work_struct *work) * * Notes: * This routine assumes no locks are held on entry. - **/ + */ static int fc_vport_create(struct Scsi_Host *shost, int channel, struct device *pdev, struct fc_vport_identifiers *ids, struct fc_vport **ret_vport) @@ -3172,7 +3163,7 @@ delete_vport: * * Notes: * This routine assumes no locks are held on entry. - **/ + */ int fc_vport_terminate(struct fc_vport *vport) { @@ -3232,9 +3223,8 @@ EXPORT_SYMBOL(fc_vport_terminate); /** * fc_vport_sched_delete - workq-based delete request for a vport - * * @work: vport to be deleted. - **/ + */ static void fc_vport_sched_delete(struct work_struct *work) { diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 5428d15f23c6..cb48b80c0865 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -328,9 +328,10 @@ EXPORT_SYMBOL_GPL(iscsi_add_session); * iscsi_create_session - create iscsi class session * @shost: scsi host * @transport: iscsi transport + * @target_id: which target * * This can be called from a LLD or iscsi_transport. - **/ + */ struct iscsi_cls_session * iscsi_create_session(struct Scsi_Host *shost, struct iscsi_transport *transport, @@ -382,7 +383,7 @@ EXPORT_SYMBOL_GPL(iscsi_free_session); * * Can be called by a LLD or iscsi_transport. There must not be * any running connections. - **/ + */ int iscsi_destroy_session(struct iscsi_cls_session *session) { iscsi_remove_session(session); @@ -418,7 +419,7 @@ static int iscsi_is_conn_dev(const struct device *dev) * for software iscsi we could be trying to preallocate a connection struct * in which case there could be two connection structs and cid would be * non-zero. - **/ + */ struct iscsi_cls_conn * iscsi_create_conn(struct iscsi_cls_session *session, uint32_t cid) { @@ -465,10 +466,10 @@ EXPORT_SYMBOL_GPL(iscsi_create_conn); /** * iscsi_destroy_conn - destroy iscsi class connection - * @session: iscsi cls session + * @conn: iscsi cls session * - * This can be called from a LLD or iscsi_transport. - **/ + * This can be called from an LLD or iscsi_transport. + */ int iscsi_destroy_conn(struct iscsi_cls_conn *conn) { transport_unregister_device(&conn->dev); @@ -690,7 +691,7 @@ iscsi_if_get_stats(struct iscsi_transport *transport, struct nlmsghdr *nlh) * * This is called by HW iscsi LLDs to notify userpsace that its HW has * removed a session. - **/ + */ int iscsi_if_destroy_session_done(struct iscsi_cls_conn *conn) { struct iscsi_internal *priv; @@ -751,7 +752,7 @@ EXPORT_SYMBOL_GPL(iscsi_if_destroy_session_done); * * This is called by HW iscsi LLDs to notify userpsace that its HW has * created a session or a existing session is back in the logged in state. - **/ + */ int iscsi_if_create_session_done(struct iscsi_cls_conn *conn) { struct iscsi_internal *priv; diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index 3120f4b3a11a..87e786daa713 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -323,7 +323,7 @@ static int do_sas_phy_delete(struct device *dev, void *data) } /** - * sas_remove_children -- tear down a devices SAS data structures + * sas_remove_children - tear down a devices SAS data structures * @dev: device belonging to the sas object * * Removes all SAS PHYs and remote PHYs for a given object @@ -336,7 +336,7 @@ void sas_remove_children(struct device *dev) EXPORT_SYMBOL(sas_remove_children); /** - * sas_remove_host -- tear down a Scsi_Host's SAS data structures + * sas_remove_host - tear down a Scsi_Host's SAS data structures * @shost: Scsi Host that is torn down * * Removes all SAS PHYs and remote PHYs for a given Scsi_Host. @@ -577,7 +577,7 @@ static void sas_phy_release(struct device *dev) } /** - * sas_phy_alloc -- allocates and initialize a SAS PHY structure + * sas_phy_alloc - allocates and initialize a SAS PHY structure * @parent: Parent device * @number: Phy index * @@ -618,7 +618,7 @@ struct sas_phy *sas_phy_alloc(struct device *parent, int number) EXPORT_SYMBOL(sas_phy_alloc); /** - * sas_phy_add -- add a SAS PHY to the device hierarchy + * sas_phy_add - add a SAS PHY to the device hierarchy * @phy: The PHY to be added * * Publishes a SAS PHY to the rest of the system. @@ -638,7 +638,7 @@ int sas_phy_add(struct sas_phy *phy) EXPORT_SYMBOL(sas_phy_add); /** - * sas_phy_free -- free a SAS PHY + * sas_phy_free - free a SAS PHY * @phy: SAS PHY to free * * Frees the specified SAS PHY. @@ -655,7 +655,7 @@ void sas_phy_free(struct sas_phy *phy) EXPORT_SYMBOL(sas_phy_free); /** - * sas_phy_delete -- remove SAS PHY + * sas_phy_delete - remove SAS PHY * @phy: SAS PHY to remove * * Removes the specified SAS PHY. If the SAS PHY has an @@ -677,7 +677,7 @@ sas_phy_delete(struct sas_phy *phy) EXPORT_SYMBOL(sas_phy_delete); /** - * scsi_is_sas_phy -- check if a struct device represents a SAS PHY + * scsi_is_sas_phy - check if a struct device represents a SAS PHY * @dev: device to check * * Returns: @@ -843,7 +843,6 @@ EXPORT_SYMBOL(sas_port_alloc_num); /** * sas_port_add - add a SAS port to the device hierarchy - * * @port: port to be added * * publishes a port to the rest of the system @@ -868,7 +867,7 @@ int sas_port_add(struct sas_port *port) EXPORT_SYMBOL(sas_port_add); /** - * sas_port_free -- free a SAS PORT + * sas_port_free - free a SAS PORT * @port: SAS PORT to free * * Frees the specified SAS PORT. @@ -885,7 +884,7 @@ void sas_port_free(struct sas_port *port) EXPORT_SYMBOL(sas_port_free); /** - * sas_port_delete -- remove SAS PORT + * sas_port_delete - remove SAS PORT * @port: SAS PORT to remove * * Removes the specified SAS PORT. If the SAS PORT has an @@ -924,7 +923,7 @@ void sas_port_delete(struct sas_port *port) EXPORT_SYMBOL(sas_port_delete); /** - * scsi_is_sas_port -- check if a struct device represents a SAS port + * scsi_is_sas_port - check if a struct device represents a SAS port * @dev: device to check * * Returns: @@ -1309,6 +1308,7 @@ static void sas_rphy_initialize(struct sas_rphy *rphy) /** * sas_end_device_alloc - allocate an rphy for an end device + * @parent: which port * * Allocates an SAS remote PHY structure, connected to @parent. * @@ -1345,6 +1345,8 @@ EXPORT_SYMBOL(sas_end_device_alloc); /** * sas_expander_alloc - allocate an rphy for an end device + * @parent: which port + * @type: SAS_EDGE_EXPANDER_DEVICE or SAS_FANOUT_EXPANDER_DEVICE * * Allocates an SAS remote PHY structure, connected to @parent. * @@ -1383,7 +1385,7 @@ struct sas_rphy *sas_expander_alloc(struct sas_port *parent, EXPORT_SYMBOL(sas_expander_alloc); /** - * sas_rphy_add -- add a SAS remote PHY to the device hierarchy + * sas_rphy_add - add a SAS remote PHY to the device hierarchy * @rphy: The remote PHY to be added * * Publishes a SAS remote PHY to the rest of the system. @@ -1430,8 +1432,8 @@ int sas_rphy_add(struct sas_rphy *rphy) EXPORT_SYMBOL(sas_rphy_add); /** - * sas_rphy_free -- free a SAS remote PHY - * @rphy SAS remote PHY to free + * sas_rphy_free - free a SAS remote PHY + * @rphy: SAS remote PHY to free * * Frees the specified SAS remote PHY. * @@ -1459,7 +1461,7 @@ void sas_rphy_free(struct sas_rphy *rphy) EXPORT_SYMBOL(sas_rphy_free); /** - * sas_rphy_delete -- remove and free SAS remote PHY + * sas_rphy_delete - remove and free SAS remote PHY * @rphy: SAS remote PHY to remove and free * * Removes the specified SAS remote PHY and frees it. @@ -1473,7 +1475,7 @@ sas_rphy_delete(struct sas_rphy *rphy) EXPORT_SYMBOL(sas_rphy_delete); /** - * sas_rphy_remove -- remove SAS remote PHY + * sas_rphy_remove - remove SAS remote PHY * @rphy: SAS remote phy to remove * * Removes the specified SAS remote PHY. @@ -1504,7 +1506,7 @@ sas_rphy_remove(struct sas_rphy *rphy) EXPORT_SYMBOL(sas_rphy_remove); /** - * scsi_is_sas_rphy -- check if a struct device represents a SAS remote PHY + * scsi_is_sas_rphy - check if a struct device represents a SAS remote PHY * @dev: device to check * * Returns: @@ -1604,7 +1606,7 @@ static int sas_user_scan(struct Scsi_Host *shost, uint channel, SETUP_TEMPLATE(expander_attrs, expander_##field, S_IRUGO, 1) /** - * sas_attach_transport -- instantiate SAS transport template + * sas_attach_transport - instantiate SAS transport template * @ft: SAS transport class function template */ struct scsi_transport_template * @@ -1715,7 +1717,7 @@ sas_attach_transport(struct sas_function_template *ft) EXPORT_SYMBOL(sas_attach_transport); /** - * sas_release_transport -- release SAS transport template instance + * sas_release_transport - release SAS transport template instance * @t: transport template instance */ void sas_release_transport(struct scsi_transport_template *t) diff --git a/drivers/scsi/scsi_transport_srp.c b/drivers/scsi/scsi_transport_srp.c index 65c584db33bd..739e327bba09 100644 --- a/drivers/scsi/scsi_transport_srp.c +++ b/drivers/scsi/scsi_transport_srp.c @@ -242,8 +242,8 @@ struct srp_rport *srp_rport_add(struct Scsi_Host *shost, EXPORT_SYMBOL_GPL(srp_rport_add); /** - * srp_rport_del -- remove a SRP remote port - * @port: SRP remote port to remove + * srp_rport_del - remove a SRP remote port + * @rport: SRP remote port to remove * * Removes the specified SRP remote port. */ @@ -271,7 +271,7 @@ static int do_srp_rport_del(struct device *dev, void *data) } /** - * srp_remove_host -- tear down a Scsi_Host's SRP data structures + * srp_remove_host - tear down a Scsi_Host's SRP data structures * @shost: Scsi Host that is torn down * * Removes all SRP remote ports for a given Scsi_Host. @@ -297,7 +297,7 @@ static int srp_it_nexus_response(struct Scsi_Host *shost, u64 nexus, int result) } /** - * srp_attach_transport -- instantiate SRP transport template + * srp_attach_transport - instantiate SRP transport template * @ft: SRP transport class function template */ struct scsi_transport_template * @@ -337,7 +337,7 @@ srp_attach_transport(struct srp_function_template *ft) EXPORT_SYMBOL_GPL(srp_attach_transport); /** - * srp_release_transport -- release SRP transport template instance + * srp_release_transport - release SRP transport template instance * @t: transport template instance */ void srp_release_transport(struct scsi_transport_template *t) diff --git a/drivers/scsi/scsicam.c b/drivers/scsi/scsicam.c index cd68a66c7bb3..3f21bc65e8c6 100644 --- a/drivers/scsi/scsicam.c +++ b/drivers/scsi/scsicam.c @@ -24,6 +24,14 @@ static int setsize(unsigned long capacity, unsigned int *cyls, unsigned int *hds, unsigned int *secs); +/** + * scsi_bios_ptable - Read PC partition table out of first sector of device. + * @dev: from this device + * + * Description: Reads the first sector from the device and returns %0x42 bytes + * starting at offset %0x1be. + * Returns: partition table in kmalloc(GFP_KERNEL) memory, or NULL on error. + */ unsigned char *scsi_bios_ptable(struct block_device *dev) { unsigned char *res = kmalloc(66, GFP_KERNEL); @@ -43,15 +51,17 @@ unsigned char *scsi_bios_ptable(struct block_device *dev) } EXPORT_SYMBOL(scsi_bios_ptable); -/* - * Function : int scsicam_bios_param (struct block_device *bdev, ector_t capacity, int *ip) +/** + * scsicam_bios_param - Determine geometry of a disk in cylinders/heads/sectors. + * @bdev: which device + * @capacity: size of the disk in sectors + * @ip: return value: ip[0]=heads, ip[1]=sectors, ip[2]=cylinders * - * Purpose : to determine the BIOS mapping used for a drive in a + * Description : determine the BIOS mapping/geometry used for a drive in a * SCSI-CAM system, storing the results in ip as required * by the HDIO_GETGEO ioctl(). * * Returns : -1 on failure, 0 on success. - * */ int scsicam_bios_param(struct block_device *bdev, sector_t capacity, int *ip) @@ -98,15 +108,18 @@ int scsicam_bios_param(struct block_device *bdev, sector_t capacity, int *ip) } EXPORT_SYMBOL(scsicam_bios_param); -/* - * Function : static int scsi_partsize(unsigned char *buf, unsigned long - * capacity,unsigned int *cyls, unsigned int *hds, unsigned int *secs); +/** + * scsi_partsize - Parse cylinders/heads/sectors from PC partition table + * @buf: partition table, see scsi_bios_ptable() + * @capacity: size of the disk in sectors + * @cyls: put cylinders here + * @hds: put heads here + * @secs: put sectors here * - * Purpose : to determine the BIOS mapping used to create the partition + * Description: determine the BIOS mapping/geometry used to create the partition * table, storing the results in *cyls, *hds, and *secs * - * Returns : -1 on failure, 0 on success. - * + * Returns: -1 on failure, 0 on success. */ int scsi_partsize(unsigned char *buf, unsigned long capacity, @@ -194,7 +207,7 @@ EXPORT_SYMBOL(scsi_partsize); * * WORKING X3T9.2 * DRAFT 792D - * + * see http://www.t10.org/ftp/t10/drafts/cam/cam-r12b.pdf * * Revision 6 * 10-MAR-94 -- cgit v1.2.3-59-g8ed1b From 74286a3c276bca449f934b2cd921f9bced996e04 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Wed, 14 Nov 2007 18:01:21 -0600 Subject: [SCSI] DocBook scsi_midlayer.tmpl->scsi.tmpl Signed-off-by: James Bottomley --- Documentation/DocBook/Makefile | 2 +- Documentation/DocBook/scsi.tmpl | 409 +++++++++++++++++++++++++++++++ Documentation/DocBook/scsi_midlayer.tmpl | 409 ------------------------------- 3 files changed, 410 insertions(+), 410 deletions(-) create mode 100644 Documentation/DocBook/scsi.tmpl delete mode 100644 Documentation/DocBook/scsi_midlayer.tmpl diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index c6c5e59daaca..6a0ad4715e9f 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -11,7 +11,7 @@ DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \ procfs-guide.xml writing_usb_driver.xml \ kernel-api.xml filesystems.xml lsm.xml usb.xml \ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ - genericirq.xml s390-drivers.xml uio-howto.xml scsi_midlayer.xml + genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml ### # The build process is as follows (targets): diff --git a/Documentation/DocBook/scsi.tmpl b/Documentation/DocBook/scsi.tmpl new file mode 100644 index 000000000000..6255930216b3 --- /dev/null +++ b/Documentation/DocBook/scsi.tmpl @@ -0,0 +1,409 @@ + + + + + + SCSI Mid Layer Guide + + + + James + Bottomley + +
+ James.Bottomley@steeleye.com +
+
+
+ + + Rob + Landley + +
+ rob@landley.net +
+
+
+ +
+ + + 2007 + Linux Foundation + + + + + This documentation is free software; you can redistribute + it and/or modify it under the terms of the GNU General Public + License version 2. + + + + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + For more details see the file COPYING in the source + distribution of Linux. + + +
+ + + + + Introduction + + Protocol vs bus + + Once upon a time, the Small Computer Systems Interface defined both + a parallel I/O bus and a data protocol to connect a wide variety of + peripherals (disk drives, tape drives, modems, printers, scanners, + optical drives, test equipment, and medical devices) to a host + computer. + + + Although the old parallel (fast/wide/ultra) SCSI bus has largely + fallen out of use, the SCSI command set is more widely used than ever + to communicate with devices over a number of different busses. + + + The SCSI protocol + is a big-endian peer-to-peer packet based protocol. SCSI commands + are 6, 10, 12, or 16 bytes long, often followed by an associated data + payload. + + + SCSI commands can be transported over just about any kind of bus, and + are the default protocol for storage devices attached to USB, SATA, + SAS, Fibre Channel, FireWire, and ATAPI devices. SCSI packets are + also commonly exchanged over Infiniband, + I20, TCP/IP + (iSCSI), even + Parallel + ports. + + + + Design of the Linux SCSI subsystem + + The SCSI subsystem uses a three layer design, with upper, mid, and low + layers. Every operation involving the SCSI subsystem (such as reading + a sector from a disk) uses one driver at each of the 3 levels: one + upper layer driver, one lower layer driver, and the scsi midlayer. + + + The SCSI upper layer provides the interface between userspace and the + kernel, in the form of block and char device nodes for I/O and + ioctl(). The SCSI lower layer contains drivers for specific hardware + devices. + + + In between is the SCSI mid-layer, analogous to a network routing + layer such as the IPv4 stack. The SCSI mid-layer routes a packet + based data protocol between the upper layer's /dev nodes and the + corresponding devices in the lower layer. It manages command queues, + provides error handling and power management functions, and responds + to ioctl() requests. + + + + + + SCSI upper layer + + The upper layer supports the user-kernel interface by providing + device nodes. + + + sd (SCSI Disk) + sd (sd_mod.o) + + + + sr (SCSI CD-ROM) + sr (sr_mod.o) + + + st (SCSI Tape) + st (st.o) + + + sg (SCSI Generic) + sg (sg.o) + + + ch (SCSI Media Changer) + ch (ch.c) + + + + + SCSI mid layer + + + SCSI midlayer implementation + + include/scsi/scsi_device.h + + +!Iinclude/scsi/scsi_device.h + + + + drivers/scsi/scsi.c + Main file for the scsi midlayer. +!Edrivers/scsi/scsi.c + + + drivers/scsi/scsicam.c + + SCSI + Common Access Method support functions, for use with + HDIO_GETGEO, etc. + +!Edrivers/scsi/scsicam.c + + + drivers/scsi/scsi_error.c + Common SCSI error/timeout handling routines. +!Edrivers/scsi/scsi_error.c + + + drivers/scsi/scsi_devinfo.c + + Manage scsi_dev_info_list, which tracks blacklisted and whitelisted + devices. + +!Idrivers/scsi/scsi_devinfo.c + + + drivers/scsi/scsi_ioctl.c + + Handle ioctl() calls for scsi devices. + +!Edrivers/scsi/scsi_ioctl.c + + + drivers/scsi/scsi_lib.c + + SCSI queuing library. + +!Edrivers/scsi/scsi_lib.c + + + drivers/scsi/scsi_lib_dma.c + + SCSI library functions depending on DMA + (map and unmap scatter-gather lists). + +!Edrivers/scsi/scsi_lib_dma.c + + + drivers/scsi/scsi_module.c + + The file drivers/scsi/scsi_module.c contains legacy support for + old-style host templates. It should never be used by any new driver. + + + + drivers/scsi/scsi_proc.c + + The functions in this file provide an interface between + the PROC file system and the SCSI device drivers + It is mainly used for debugging, statistics and to pass + information directly to the lowlevel driver. + + I.E. plumbing to manage /proc/scsi/* + +!Idrivers/scsi/scsi_proc.c + + + drivers/scsi/scsi_netlink.c + + Infrastructure to provide async events from transports to userspace + via netlink, using a single NETLINK_SCSITRANSPORT protocol for all + transports. + + See the + original patch submission for more details. + +!Idrivers/scsi/scsi_netlink.c + + + drivers/scsi/scsi_scan.c + + Scan a host to determine which (if any) devices are attached. + + The general scanning/probing algorithm is as follows, exceptions are + made to it depending on device specific flags, compilation options, + and global variable (boot or module load time) settings. + + A specific LUN is scanned via an INQUIRY command; if the LUN has a + device attached, a scsi_device is allocated and setup for it. + + For every id of every channel on the given host, start by scanning + LUN 0. Skip hosts that don't respond at all to a scan of LUN 0. + Otherwise, if LUN 0 has a device attached, allocate and setup a + scsi_device for it. If target is SCSI-3 or up, issue a REPORT LUN, + and scan all of the LUNs returned by the REPORT LUN; else, + sequentially scan LUNs up until some maximum is reached, or a LUN is + seen that cannot have a device attached to it. + +!Idrivers/scsi/scsi_scan.c + + + drivers/scsi/scsi_sysctl.c + + Set up the sysctl entry: "/dev/scsi/logging_level" + (DEV_SCSI_LOGGING_LEVEL) which sets/returns scsi_logging_level. + + + + drivers/scsi/scsi_sysfs.c + + SCSI sysfs interface routines. + +!Edrivers/scsi/scsi_sysfs.c + + + drivers/scsi/hosts.c + + mid to lowlevel SCSI driver interface + +!Edrivers/scsi/hosts.c + + + drivers/scsi/constants.c + + mid to lowlevel SCSI driver interface + +!Edrivers/scsi/constants.c + + + + + Transport classes + + Transport classes are service libraries for drivers in the scsi + lower layer, which expose transport attributes in sysfs. + + + Fibre Channel transport + + The file drivers/scsi/scsi_transport_fc.c defines transport attributes + for Fibre Channel. + +!Edrivers/scsi/scsi_transport_fc.c + + + iSCSI transport class + + The file drivers/scsi/scsi_transport_iscsi.c defines transport + attributes for the iSCSI class, which sends SCSI packets over TCP/IP + connections. + +!Edrivers/scsi/scsi_transport_iscsi.c + + + Serial Attached SCSI (SAS) transport class + + The file drivers/scsi/scsi_transport_sas.c defines transport + attributes for Serial Attached SCSI, a variant of SATA aimed at + large high-end systems. + + + The SAS transport class contains common code to deal with SAS HBAs, + an aproximated representation of SAS topologies in the driver model, + and various sysfs attributes to expose these topologies and managment + interfaces to userspace. + + + In addition to the basic SCSI core objects this transport class + introduces two additional intermediate objects: The SAS PHY + as represented by struct sas_phy defines an "outgoing" PHY on + a SAS HBA or Expander, and the SAS remote PHY represented by + struct sas_rphy defines an "incoming" PHY on a SAS Expander or + end device. Note that this is purely a software concept, the + underlying hardware for a PHY and a remote PHY is the exactly + the same. + + + There is no concept of a SAS port in this code, users can see + what PHYs form a wide port based on the port_identifier attribute, + which is the same for all PHYs in a port. + +!Edrivers/scsi/scsi_transport_sas.c + + + SATA transport class + + The SATA transport is handled by libata, which has its own book of + documentation in this directory. + + + + Parallel SCSI (SPI) transport class + + The file drivers/scsi/scsi_transport_spi.c defines transport + attributes for traditional (fast/wide/ultra) SCSI busses. + +!Edrivers/scsi/scsi_transport_spi.c + + + SCSI RDMA (SRP) transport class + + The file drivers/scsi/scsi_transport_srp.c defines transport + attributes for SCSI over Remote Direct Memory Access. + +!Edrivers/scsi/scsi_transport_srp.c + + + + + + + SCSI lower layer + + Host Bus Adapter transport types + + Many modern device controllers use the SCSI command set as a protocol to + communicate with their devices through many different types of physical + connections. + + + In SCSI language a bus capable of carrying SCSI commands is + called a "transport", and a controller connecting to such a bus is + called a "host bus adapter" (HBA). + + + Debug transport + + The file drivers/scsi/scsi_debug.c simulates a host adapter with a + variable number of disks (or disk like devices) attached, sharing a + common amount of RAM. Does a lot of checking to make sure that we are + not getting blocks mixed up, and panics the kernel if anything out of + the ordinary is seen. + + + To be more realistic, the simulated devices have the transport + attributes of SAS disks. + + + For documentation see + http://www.torque.net/sg/sdebug26.html + + + + + todo + Parallel (fast/wide/ultra) SCSI, USB, SATA, + SAS, Fibre Channel, FireWire, ATAPI devices, Infiniband, + I20, iSCSI, Parallel ports, netlink... + + + + +
diff --git a/Documentation/DocBook/scsi_midlayer.tmpl b/Documentation/DocBook/scsi_midlayer.tmpl deleted file mode 100644 index 6255930216b3..000000000000 --- a/Documentation/DocBook/scsi_midlayer.tmpl +++ /dev/null @@ -1,409 +0,0 @@ - - - - - - SCSI Mid Layer Guide - - - - James - Bottomley - -
- James.Bottomley@steeleye.com -
-
-
- - - Rob - Landley - -
- rob@landley.net -
-
-
- -
- - - 2007 - Linux Foundation - - - - - This documentation is free software; you can redistribute - it and/or modify it under the terms of the GNU General Public - License version 2. - - - - This program is distributed in the hope that it will be - useful, but WITHOUT ANY WARRANTY; without even the implied - warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - For more details see the file COPYING in the source - distribution of Linux. - - -
- - - - - Introduction - - Protocol vs bus - - Once upon a time, the Small Computer Systems Interface defined both - a parallel I/O bus and a data protocol to connect a wide variety of - peripherals (disk drives, tape drives, modems, printers, scanners, - optical drives, test equipment, and medical devices) to a host - computer. - - - Although the old parallel (fast/wide/ultra) SCSI bus has largely - fallen out of use, the SCSI command set is more widely used than ever - to communicate with devices over a number of different busses. - - - The SCSI protocol - is a big-endian peer-to-peer packet based protocol. SCSI commands - are 6, 10, 12, or 16 bytes long, often followed by an associated data - payload. - - - SCSI commands can be transported over just about any kind of bus, and - are the default protocol for storage devices attached to USB, SATA, - SAS, Fibre Channel, FireWire, and ATAPI devices. SCSI packets are - also commonly exchanged over Infiniband, - I20, TCP/IP - (iSCSI), even - Parallel - ports. - - - - Design of the Linux SCSI subsystem - - The SCSI subsystem uses a three layer design, with upper, mid, and low - layers. Every operation involving the SCSI subsystem (such as reading - a sector from a disk) uses one driver at each of the 3 levels: one - upper layer driver, one lower layer driver, and the scsi midlayer. - - - The SCSI upper layer provides the interface between userspace and the - kernel, in the form of block and char device nodes for I/O and - ioctl(). The SCSI lower layer contains drivers for specific hardware - devices. - - - In between is the SCSI mid-layer, analogous to a network routing - layer such as the IPv4 stack. The SCSI mid-layer routes a packet - based data protocol between the upper layer's /dev nodes and the - corresponding devices in the lower layer. It manages command queues, - provides error handling and power management functions, and responds - to ioctl() requests. - - - - - - SCSI upper layer - - The upper layer supports the user-kernel interface by providing - device nodes. - - - sd (SCSI Disk) - sd (sd_mod.o) - - - - sr (SCSI CD-ROM) - sr (sr_mod.o) - - - st (SCSI Tape) - st (st.o) - - - sg (SCSI Generic) - sg (sg.o) - - - ch (SCSI Media Changer) - ch (ch.c) - - - - - SCSI mid layer - - - SCSI midlayer implementation - - include/scsi/scsi_device.h - - -!Iinclude/scsi/scsi_device.h - - - - drivers/scsi/scsi.c - Main file for the scsi midlayer. -!Edrivers/scsi/scsi.c - - - drivers/scsi/scsicam.c - - SCSI - Common Access Method support functions, for use with - HDIO_GETGEO, etc. - -!Edrivers/scsi/scsicam.c - - - drivers/scsi/scsi_error.c - Common SCSI error/timeout handling routines. -!Edrivers/scsi/scsi_error.c - - - drivers/scsi/scsi_devinfo.c - - Manage scsi_dev_info_list, which tracks blacklisted and whitelisted - devices. - -!Idrivers/scsi/scsi_devinfo.c - - - drivers/scsi/scsi_ioctl.c - - Handle ioctl() calls for scsi devices. - -!Edrivers/scsi/scsi_ioctl.c - - - drivers/scsi/scsi_lib.c - - SCSI queuing library. - -!Edrivers/scsi/scsi_lib.c - - - drivers/scsi/scsi_lib_dma.c - - SCSI library functions depending on DMA - (map and unmap scatter-gather lists). - -!Edrivers/scsi/scsi_lib_dma.c - - - drivers/scsi/scsi_module.c - - The file drivers/scsi/scsi_module.c contains legacy support for - old-style host templates. It should never be used by any new driver. - - - - drivers/scsi/scsi_proc.c - - The functions in this file provide an interface between - the PROC file system and the SCSI device drivers - It is mainly used for debugging, statistics and to pass - information directly to the lowlevel driver. - - I.E. plumbing to manage /proc/scsi/* - -!Idrivers/scsi/scsi_proc.c - - - drivers/scsi/scsi_netlink.c - - Infrastructure to provide async events from transports to userspace - via netlink, using a single NETLINK_SCSITRANSPORT protocol for all - transports. - - See the - original patch submission for more details. - -!Idrivers/scsi/scsi_netlink.c - - - drivers/scsi/scsi_scan.c - - Scan a host to determine which (if any) devices are attached. - - The general scanning/probing algorithm is as follows, exceptions are - made to it depending on device specific flags, compilation options, - and global variable (boot or module load time) settings. - - A specific LUN is scanned via an INQUIRY command; if the LUN has a - device attached, a scsi_device is allocated and setup for it. - - For every id of every channel on the given host, start by scanning - LUN 0. Skip hosts that don't respond at all to a scan of LUN 0. - Otherwise, if LUN 0 has a device attached, allocate and setup a - scsi_device for it. If target is SCSI-3 or up, issue a REPORT LUN, - and scan all of the LUNs returned by the REPORT LUN; else, - sequentially scan LUNs up until some maximum is reached, or a LUN is - seen that cannot have a device attached to it. - -!Idrivers/scsi/scsi_scan.c - - - drivers/scsi/scsi_sysctl.c - - Set up the sysctl entry: "/dev/scsi/logging_level" - (DEV_SCSI_LOGGING_LEVEL) which sets/returns scsi_logging_level. - - - - drivers/scsi/scsi_sysfs.c - - SCSI sysfs interface routines. - -!Edrivers/scsi/scsi_sysfs.c - - - drivers/scsi/hosts.c - - mid to lowlevel SCSI driver interface - -!Edrivers/scsi/hosts.c - - - drivers/scsi/constants.c - - mid to lowlevel SCSI driver interface - -!Edrivers/scsi/constants.c - - - - - Transport classes - - Transport classes are service libraries for drivers in the scsi - lower layer, which expose transport attributes in sysfs. - - - Fibre Channel transport - - The file drivers/scsi/scsi_transport_fc.c defines transport attributes - for Fibre Channel. - -!Edrivers/scsi/scsi_transport_fc.c - - - iSCSI transport class - - The file drivers/scsi/scsi_transport_iscsi.c defines transport - attributes for the iSCSI class, which sends SCSI packets over TCP/IP - connections. - -!Edrivers/scsi/scsi_transport_iscsi.c - - - Serial Attached SCSI (SAS) transport class - - The file drivers/scsi/scsi_transport_sas.c defines transport - attributes for Serial Attached SCSI, a variant of SATA aimed at - large high-end systems. - - - The SAS transport class contains common code to deal with SAS HBAs, - an aproximated representation of SAS topologies in the driver model, - and various sysfs attributes to expose these topologies and managment - interfaces to userspace. - - - In addition to the basic SCSI core objects this transport class - introduces two additional intermediate objects: The SAS PHY - as represented by struct sas_phy defines an "outgoing" PHY on - a SAS HBA or Expander, and the SAS remote PHY represented by - struct sas_rphy defines an "incoming" PHY on a SAS Expander or - end device. Note that this is purely a software concept, the - underlying hardware for a PHY and a remote PHY is the exactly - the same. - - - There is no concept of a SAS port in this code, users can see - what PHYs form a wide port based on the port_identifier attribute, - which is the same for all PHYs in a port. - -!Edrivers/scsi/scsi_transport_sas.c - - - SATA transport class - - The SATA transport is handled by libata, which has its own book of - documentation in this directory. - - - - Parallel SCSI (SPI) transport class - - The file drivers/scsi/scsi_transport_spi.c defines transport - attributes for traditional (fast/wide/ultra) SCSI busses. - -!Edrivers/scsi/scsi_transport_spi.c - - - SCSI RDMA (SRP) transport class - - The file drivers/scsi/scsi_transport_srp.c defines transport - attributes for SCSI over Remote Direct Memory Access. - -!Edrivers/scsi/scsi_transport_srp.c - - - - - - - SCSI lower layer - - Host Bus Adapter transport types - - Many modern device controllers use the SCSI command set as a protocol to - communicate with their devices through many different types of physical - connections. - - - In SCSI language a bus capable of carrying SCSI commands is - called a "transport", and a controller connecting to such a bus is - called a "host bus adapter" (HBA). - - - Debug transport - - The file drivers/scsi/scsi_debug.c simulates a host adapter with a - variable number of disks (or disk like devices) attached, sharing a - common amount of RAM. Does a lot of checking to make sure that we are - not getting blocks mixed up, and panics the kernel if anything out of - the ordinary is seen. - - - To be more realistic, the simulated devices have the transport - attributes of SAS disks. - - - For documentation see - http://www.torque.net/sg/sdebug26.html - - - - - todo - Parallel (fast/wide/ultra) SCSI, USB, SATA, - SAS, Fibre Channel, FireWire, ATAPI devices, Infiniband, - I20, iSCSI, Parallel ports, netlink... - - - - -
-- cgit v1.2.3-59-g8ed1b From 57643c711c3759623e7ac651a4a418858cdaeae5 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 9 Sep 2007 21:16:58 +0300 Subject: [SCSI] ppa: convert to accessors and !use_sg cleanup - convert to accessors and !use_sg cleanup Signed-off-by: Boaz Harrosh Acked-by: Randy Dunlap Tested-by: Randy Dunlap Signed-off-by: James Bottomley --- drivers/scsi/ppa.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/ppa.c b/drivers/scsi/ppa.c index 67ee51a3d7e1..f655ae320b48 100644 --- a/drivers/scsi/ppa.c +++ b/drivers/scsi/ppa.c @@ -750,18 +750,16 @@ static int ppa_engine(ppa_struct *dev, struct scsi_cmnd *cmd) cmd->SCp.phase++; case 4: /* Phase 4 - Setup scatter/gather buffers */ - if (cmd->use_sg) { - /* if many buffers are available, start filling the first */ - cmd->SCp.buffer = (struct scatterlist *) cmd->request_buffer; + if (scsi_bufflen(cmd)) { + cmd->SCp.buffer = scsi_sglist(cmd); cmd->SCp.this_residual = cmd->SCp.buffer->length; cmd->SCp.ptr = sg_virt(cmd->SCp.buffer); } else { - /* else fill the only available buffer */ cmd->SCp.buffer = NULL; - cmd->SCp.this_residual = cmd->request_bufflen; - cmd->SCp.ptr = cmd->request_buffer; + cmd->SCp.this_residual = 0; + cmd->SCp.ptr = NULL; } - cmd->SCp.buffers_residual = cmd->use_sg - 1; + cmd->SCp.buffers_residual = scsi_sg_count(cmd) - 1; cmd->SCp.phase++; case 5: /* Phase 5 - Data transfer stage */ -- cgit v1.2.3-59-g8ed1b From 3ce7c6588637614b00072569679791a04898c790 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 9 Sep 2007 21:13:42 +0300 Subject: [SCSI] imm: convert to accessors and !use_sg cleanup - convert to accessors and !use_sg cleanup - Not ready for sg-chaining Signed-off-by: Boaz Harrosh Acked-by: Randy Dunlap Tested-by: Randy Dunlap Signed-off-by: James Bottomley --- drivers/scsi/imm.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/imm.c b/drivers/scsi/imm.c index a3d0c6b14958..f97d172844be 100644 --- a/drivers/scsi/imm.c +++ b/drivers/scsi/imm.c @@ -837,19 +837,16 @@ static int imm_engine(imm_struct *dev, struct scsi_cmnd *cmd) /* Phase 4 - Setup scatter/gather buffers */ case 4: - if (cmd->use_sg) { - /* if many buffers are available, start filling the first */ - cmd->SCp.buffer = - (struct scatterlist *) cmd->request_buffer; + if (scsi_bufflen(cmd)) { + cmd->SCp.buffer = scsi_sglist(cmd); cmd->SCp.this_residual = cmd->SCp.buffer->length; cmd->SCp.ptr = sg_virt(cmd->SCp.buffer); } else { - /* else fill the only available buffer */ cmd->SCp.buffer = NULL; - cmd->SCp.this_residual = cmd->request_bufflen; - cmd->SCp.ptr = cmd->request_buffer; + cmd->SCp.this_residual = 0; + cmd->SCp.ptr = NULL; } - cmd->SCp.buffers_residual = cmd->use_sg - 1; + cmd->SCp.buffers_residual = scsi_sg_count(cmd) - 1; cmd->SCp.phase++; if (cmd->SCp.this_residual & 0x01) cmd->SCp.this_residual++; -- cgit v1.2.3-59-g8ed1b From e5a69e27cc193f98c9a5a9086e3bf85528170623 Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Sat, 27 Oct 2007 09:48:46 +0200 Subject: [SCSI] megaraid_sas: Convert aen_mutex to the mutex API Signed-off-by: Matthias Kaehlcke Acked-by: Bo Yang Signed-off-by: James Bottomley --- drivers/scsi/megaraid/megaraid_sas.c | 7 ++++--- drivers/scsi/megaraid/megaraid_sas.h | 2 +- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index e3c5c5282203..3ad379fcd18f 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -2358,7 +2359,7 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) spin_lock_init(&instance->cmd_pool_lock); - sema_init(&instance->aen_mutex, 1); + mutex_init(&instance->aen_mutex); sema_init(&instance->ioctl_sem, MEGASAS_INT_CMDS); /* @@ -2874,10 +2875,10 @@ static int megasas_mgmt_ioctl_aen(struct file *file, unsigned long arg) if (!instance) return -ENODEV; - down(&instance->aen_mutex); + mutex_lock(&instance->aen_mutex); error = megasas_register_aen(instance, aen.seq_num, aen.class_locale_word); - up(&instance->aen_mutex); + mutex_unlock(&instance->aen_mutex); return error; } diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index 4dffc918a414..08c74c991781 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -1089,7 +1089,7 @@ struct megasas_instance { struct megasas_evt_detail *evt_detail; dma_addr_t evt_detail_h; struct megasas_cmd *aen_cmd; - struct semaphore aen_mutex; + struct mutex aen_mutex; struct semaphore ioctl_sem; struct Scsi_Host *host; -- cgit v1.2.3-59-g8ed1b From 5929faf3334f4c69f3bb02be59d7c127e0cefa1f Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Mon, 5 Nov 2007 11:51:17 -0800 Subject: [SCSI] libsas: Convert sas_proto users to sas_protocol sparse complains about the mixing of enums in libsas. Since the underlying numeric values of both enums are the same, combine them to get rid of the warning. Signed-off-by: Darrick J. Wong Signed-off-by: James Bottomley --- drivers/scsi/aic94xx/aic94xx_dev.c | 6 +++--- drivers/scsi/aic94xx/aic94xx_dump.c | 4 ++-- drivers/scsi/aic94xx/aic94xx_hwi.c | 2 +- drivers/scsi/aic94xx/aic94xx_scb.c | 6 +++--- drivers/scsi/aic94xx/aic94xx_task.c | 30 +++++++++++++++--------------- drivers/scsi/aic94xx/aic94xx_tmf.c | 12 ++++++------ drivers/scsi/libsas/sas_discover.c | 2 +- drivers/scsi/libsas/sas_expander.c | 6 +++--- drivers/scsi/libsas/sas_internal.h | 2 +- include/scsi/libsas.h | 18 +++++++++--------- include/scsi/sas.h | 13 ++++++------- include/scsi/scsi_transport_sas.h | 8 +------- 12 files changed, 51 insertions(+), 58 deletions(-) diff --git a/drivers/scsi/aic94xx/aic94xx_dev.c b/drivers/scsi/aic94xx/aic94xx_dev.c index 3dce618bf414..72042cae7768 100644 --- a/drivers/scsi/aic94xx/aic94xx_dev.c +++ b/drivers/scsi/aic94xx/aic94xx_dev.c @@ -165,7 +165,7 @@ static int asd_init_target_ddb(struct domain_device *dev) if (dev->port->oob_mode != SATA_OOB_MODE) { flags |= OPEN_REQUIRED; if ((dev->dev_type == SATA_DEV) || - (dev->tproto & SAS_PROTO_STP)) { + (dev->tproto & SAS_PROTOCOL_STP)) { struct smp_resp *rps_resp = &dev->sata_dev.rps_resp; if (rps_resp->frame_type == SMP_RESPONSE && rps_resp->function == SMP_REPORT_PHY_SATA && @@ -193,7 +193,7 @@ static int asd_init_target_ddb(struct domain_device *dev) asd_ddbsite_write_byte(asd_ha, ddb, DDB_TARG_FLAGS, flags); flags = 0; - if (dev->tproto & SAS_PROTO_STP) + if (dev->tproto & SAS_PROTOCOL_STP) flags |= STP_CL_POL_NO_TX; asd_ddbsite_write_byte(asd_ha, ddb, DDB_TARG_FLAGS2, flags); @@ -201,7 +201,7 @@ static int asd_init_target_ddb(struct domain_device *dev) asd_ddbsite_write_word(asd_ha, ddb, SEND_QUEUE_TAIL, 0xFFFF); asd_ddbsite_write_word(asd_ha, ddb, SISTER_DDB, 0xFFFF); - if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTO_STP)) { + if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { i = asd_init_sata(dev); if (i < 0) { asd_free_ddb(asd_ha, ddb); diff --git a/drivers/scsi/aic94xx/aic94xx_dump.c b/drivers/scsi/aic94xx/aic94xx_dump.c index 6bd8e3059d27..3d8c4ff1f2ef 100644 --- a/drivers/scsi/aic94xx/aic94xx_dump.c +++ b/drivers/scsi/aic94xx/aic94xx_dump.c @@ -903,11 +903,11 @@ void asd_dump_frame_rcvd(struct asd_phy *phy, int i; switch ((dl->status_block[1] & 0x70) >> 3) { - case SAS_PROTO_STP: + case SAS_PROTOCOL_STP: ASD_DPRINTK("STP proto device-to-host FIS:\n"); break; default: - case SAS_PROTO_SSP: + case SAS_PROTOCOL_SSP: ASD_DPRINTK("SAS proto IDENTIFY:\n"); break; } diff --git a/drivers/scsi/aic94xx/aic94xx_hwi.c b/drivers/scsi/aic94xx/aic94xx_hwi.c index 0cd7eed9196c..098b5f39cd31 100644 --- a/drivers/scsi/aic94xx/aic94xx_hwi.c +++ b/drivers/scsi/aic94xx/aic94xx_hwi.c @@ -91,7 +91,7 @@ static int asd_init_phy(struct asd_phy *phy) sas_phy->enabled = 1; sas_phy->class = SAS; - sas_phy->iproto = SAS_PROTO_ALL; + sas_phy->iproto = SAS_PROTOCOL_ALL; sas_phy->tproto = 0; sas_phy->type = PHY_TYPE_PHYSICAL; sas_phy->role = PHY_ROLE_INITIATOR; diff --git a/drivers/scsi/aic94xx/aic94xx_scb.c b/drivers/scsi/aic94xx/aic94xx_scb.c index db6ab1a3b81e..0febad4dd75f 100644 --- a/drivers/scsi/aic94xx/aic94xx_scb.c +++ b/drivers/scsi/aic94xx/aic94xx_scb.c @@ -788,12 +788,12 @@ void asd_build_control_phy(struct asd_ascb *ascb, int phy_id, u8 subfunc) /* initiator port settings are in the hi nibble */ if (phy->sas_phy.role == PHY_ROLE_INITIATOR) - control_phy->port_type = SAS_PROTO_ALL << 4; + control_phy->port_type = SAS_PROTOCOL_ALL << 4; else if (phy->sas_phy.role == PHY_ROLE_TARGET) - control_phy->port_type = SAS_PROTO_ALL; + control_phy->port_type = SAS_PROTOCOL_ALL; else control_phy->port_type = - (SAS_PROTO_ALL << 4) | SAS_PROTO_ALL; + (SAS_PROTOCOL_ALL << 4) | SAS_PROTOCOL_ALL; /* link reset retries, this should be nominal */ control_phy->link_reset_retries = 10; diff --git a/drivers/scsi/aic94xx/aic94xx_task.c b/drivers/scsi/aic94xx/aic94xx_task.c index ee0a98bffcd4..663fdef38c52 100644 --- a/drivers/scsi/aic94xx/aic94xx_task.c +++ b/drivers/scsi/aic94xx/aic94xx_task.c @@ -187,7 +187,7 @@ static void asd_get_response_tasklet(struct asd_ascb *ascb, ts->buf_valid_size = 0; edb = asd_ha->seq.edb_arr[edb_id + escb->edb_index]; r = edb->vaddr; - if (task->task_proto == SAS_PROTO_SSP) { + if (task->task_proto == SAS_PROTOCOL_SSP) { struct ssp_response_iu *iu = r + 16 + sizeof(struct ssp_frame_hdr); @@ -341,14 +341,14 @@ Again: } switch (task->task_proto) { - case SATA_PROTO: - case SAS_PROTO_STP: + case SAS_PROTOCOL_SATA: + case SAS_PROTOCOL_STP: asd_unbuild_ata_ascb(ascb); break; - case SAS_PROTO_SMP: + case SAS_PROTOCOL_SMP: asd_unbuild_smp_ascb(ascb); break; - case SAS_PROTO_SSP: + case SAS_PROTOCOL_SSP: asd_unbuild_ssp_ascb(ascb); default: break; @@ -586,17 +586,17 @@ int asd_execute_task(struct sas_task *task, const int num, list_for_each_entry(a, &alist, list) { t = a->uldd_task; a->uldd_timer = 1; - if (t->task_proto & SAS_PROTO_STP) - t->task_proto = SAS_PROTO_STP; + if (t->task_proto & SAS_PROTOCOL_STP) + t->task_proto = SAS_PROTOCOL_STP; switch (t->task_proto) { - case SATA_PROTO: - case SAS_PROTO_STP: + case SAS_PROTOCOL_SATA: + case SAS_PROTOCOL_STP: res = asd_build_ata_ascb(a, t, gfp_flags); break; - case SAS_PROTO_SMP: + case SAS_PROTOCOL_SMP: res = asd_build_smp_ascb(a, t, gfp_flags); break; - case SAS_PROTO_SSP: + case SAS_PROTOCOL_SSP: res = asd_build_ssp_ascb(a, t, gfp_flags); break; default: @@ -633,14 +633,14 @@ out_err_unmap: t->task_state_flags &= ~SAS_TASK_AT_INITIATOR; spin_unlock_irqrestore(&t->task_state_lock, flags); switch (t->task_proto) { - case SATA_PROTO: - case SAS_PROTO_STP: + case SAS_PROTOCOL_SATA: + case SAS_PROTOCOL_STP: asd_unbuild_ata_ascb(a); break; - case SAS_PROTO_SMP: + case SAS_PROTOCOL_SMP: asd_unbuild_smp_ascb(a); break; - case SAS_PROTO_SSP: + case SAS_PROTOCOL_SSP: asd_unbuild_ssp_ascb(a); default: break; diff --git a/drivers/scsi/aic94xx/aic94xx_tmf.c b/drivers/scsi/aic94xx/aic94xx_tmf.c index c0d0b7d7a8ce..87b2f6e6adfe 100644 --- a/drivers/scsi/aic94xx/aic94xx_tmf.c +++ b/drivers/scsi/aic94xx/aic94xx_tmf.c @@ -372,21 +372,21 @@ int asd_abort_task(struct sas_task *task) scb->header.opcode = ABORT_TASK; switch (task->task_proto) { - case SATA_PROTO: - case SAS_PROTO_STP: + case SAS_PROTOCOL_SATA: + case SAS_PROTOCOL_STP: scb->abort_task.proto_conn_rate = (1 << 5); /* STP */ break; - case SAS_PROTO_SSP: + case SAS_PROTOCOL_SSP: scb->abort_task.proto_conn_rate = (1 << 4); /* SSP */ scb->abort_task.proto_conn_rate |= task->dev->linkrate; break; - case SAS_PROTO_SMP: + case SAS_PROTOCOL_SMP: break; default: break; } - if (task->task_proto == SAS_PROTO_SSP) { + if (task->task_proto == SAS_PROTOCOL_SSP) { scb->abort_task.ssp_frame.frame_type = SSP_TASK; memcpy(scb->abort_task.ssp_frame.hashed_dest_addr, task->dev->hashed_sas_addr, HASHED_SAS_ADDR_SIZE); @@ -512,7 +512,7 @@ static int asd_initiate_ssp_tmf(struct domain_device *dev, u8 *lun, int res = 1; struct scb *scb; - if (!(dev->tproto & SAS_PROTO_SSP)) + if (!(dev->tproto & SAS_PROTOCOL_SSP)) return TMF_RESP_FUNC_ESUPP; ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL); diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index 5f3a0d7b18de..31b9af224243 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -98,7 +98,7 @@ static int sas_get_port_device(struct asd_sas_port *port) dev->dev_type = SATA_PM; else dev->dev_type = SATA_DEV; - dev->tproto = SATA_PROTO; + dev->tproto = SAS_PROTOCOL_SATA; } else { struct sas_identify_frame *id = (struct sas_identify_frame *) dev->frame_rcvd; diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 8727436b222d..27674fe468f5 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -656,9 +656,9 @@ static struct domain_device *sas_ex_discover_end_dev( sas_ex_get_linkrate(parent, child, phy); #ifdef CONFIG_SCSI_SAS_ATA - if ((phy->attached_tproto & SAS_PROTO_STP) || phy->attached_sata_dev) { + if ((phy->attached_tproto & SAS_PROTOCOL_STP) || phy->attached_sata_dev) { child->dev_type = SATA_DEV; - if (phy->attached_tproto & SAS_PROTO_STP) + if (phy->attached_tproto & SAS_PROTOCOL_STP) child->tproto = phy->attached_tproto; if (phy->attached_sata_dev) child->tproto |= SATA_DEV; @@ -695,7 +695,7 @@ static struct domain_device *sas_ex_discover_end_dev( } } else #endif - if (phy->attached_tproto & SAS_PROTO_SSP) { + if (phy->attached_tproto & SAS_PROTOCOL_SSP) { child->dev_type = SAS_END_DEV; rphy = sas_end_device_alloc(phy->port); /* FIXME: error handling */ diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index 2b8213b1832d..baa0666ffa80 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -45,7 +45,7 @@ void sas_scsi_recover_host(struct Scsi_Host *shost); int sas_show_class(enum sas_class class, char *buf); -int sas_show_proto(enum sas_proto proto, char *buf); +int sas_show_proto(enum sas_protocol proto, char *buf); int sas_show_linkrate(enum sas_linkrate linkrate, char *buf); int sas_show_oob_mode(enum sas_oob_mode oob_mode, char *buf); diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index a466c2cb8955..e42374cebf95 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -122,8 +122,8 @@ struct ex_phy { u8 attached_sata_dev:1; u8 attached_sata_ps:1; - enum sas_proto attached_tproto; - enum sas_proto attached_iproto; + enum sas_protocol attached_tproto; + enum sas_protocol attached_iproto; u8 attached_sas_addr[SAS_ADDR_SIZE]; u8 attached_phy_id; @@ -191,8 +191,8 @@ struct domain_device { struct list_head dev_list_node; - enum sas_proto iproto; - enum sas_proto tproto; + enum sas_protocol iproto; + enum sas_protocol tproto; struct sas_rphy *rphy; @@ -245,8 +245,8 @@ struct asd_sas_port { enum sas_class class; u8 sas_addr[SAS_ADDR_SIZE]; u8 attached_sas_addr[SAS_ADDR_SIZE]; - enum sas_proto iproto; - enum sas_proto tproto; + enum sas_protocol iproto; + enum sas_protocol tproto; enum sas_oob_mode oob_mode; @@ -289,8 +289,8 @@ struct asd_sas_phy { int id; /* must be set */ enum sas_class class; - enum sas_proto iproto; - enum sas_proto tproto; + enum sas_protocol iproto; + enum sas_protocol tproto; enum sas_phy_type type; enum sas_phy_role role; @@ -537,7 +537,7 @@ struct sas_task { spinlock_t task_state_lock; unsigned task_state_flags; - enum sas_proto task_proto; + enum sas_protocol task_proto; /* Used by the discovery code. */ struct timer_list timer; diff --git a/include/scsi/sas.h b/include/scsi/sas.h index 2f4b6afa34fc..e9fd02281381 100644 --- a/include/scsi/sas.h +++ b/include/scsi/sas.h @@ -102,13 +102,12 @@ enum sas_dev_type { SATA_PM_PORT= 8, }; -/* Partly from IDENTIFY address frame. */ -enum sas_proto { - SATA_PROTO = 1, - SAS_PROTO_SMP = 2, /* protocol */ - SAS_PROTO_STP = 4, /* protocol */ - SAS_PROTO_SSP = 8, /* protocol */ - SAS_PROTO_ALL = 0xE, +enum sas_protocol { + SAS_PROTOCOL_SATA = 0x01, + SAS_PROTOCOL_SMP = 0x02, + SAS_PROTOCOL_STP = 0x04, + SAS_PROTOCOL_SSP = 0x08, + SAS_PROTOCOL_ALL = 0x0E, }; /* From the spec; local phys only */ diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h index abdfd2e27dd7..007d92904207 100644 --- a/include/scsi/scsi_transport_sas.h +++ b/include/scsi/scsi_transport_sas.h @@ -4,6 +4,7 @@ #include #include #include +#include struct scsi_transport_template; struct sas_rphy; @@ -16,13 +17,6 @@ enum sas_device_type { SAS_FANOUT_EXPANDER_DEVICE, }; -enum sas_protocol { - SAS_PROTOCOL_SATA = 0x01, - SAS_PROTOCOL_SMP = 0x02, - SAS_PROTOCOL_STP = 0x04, - SAS_PROTOCOL_SSP = 0x08, -}; - static inline int sas_protocol_ata(enum sas_protocol proto) { return ((proto & SAS_PROTOCOL_SATA) || -- cgit v1.2.3-59-g8ed1b From 8ee24023ef43c77cdaea1add00e1e45cc4fc3261 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Mon, 5 Nov 2007 11:52:14 -0800 Subject: [SCSI] libsas: Fix various sparse complaints Annotate sas_queuecommand with locking details, and clean up a few more sparse warnings about static/non-static declarations. Signed-off-by: Darrick J. Wong Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_scsi_host.c | 6 +++++- include/scsi/libsas.h | 4 +--- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index 7663841eb4cf..b784089b18d0 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -200,6 +200,10 @@ int sas_queue_up(struct sas_task *task) */ int sas_queuecommand(struct scsi_cmnd *cmd, void (*scsi_done)(struct scsi_cmnd *)) + __releases(host->host_lock) + __acquires(dev->sata_dev.ap->lock) + __releases(dev->sata_dev.ap->lock) + __acquires(host->host_lock) { int res = 0; struct domain_device *dev = cmd_to_domain_dev(cmd); @@ -410,7 +414,7 @@ static int sas_recover_I_T(struct domain_device *dev) } /* Find the sas_phy that's attached to this device */ -struct sas_phy *find_local_sas_phy(struct domain_device *dev) +static struct sas_phy *find_local_sas_phy(struct domain_device *dev) { struct domain_device *pdev = dev->parent; struct ex_phy *exphy = NULL; diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index e42374cebf95..93248cd48373 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -563,7 +563,7 @@ struct sas_task { struct work_struct abort_work; }; - +extern struct kmem_cache *sas_task_cache; #define SAS_TASK_STATE_PENDING 1 #define SAS_TASK_STATE_DONE 2 @@ -573,7 +573,6 @@ struct sas_task { static inline struct sas_task *sas_alloc_task(gfp_t flags) { - extern struct kmem_cache *sas_task_cache; struct sas_task *task = kmem_cache_zalloc(sas_task_cache, flags); if (task) { @@ -590,7 +589,6 @@ static inline struct sas_task *sas_alloc_task(gfp_t flags) static inline void sas_free_task(struct sas_task *task) { if (task) { - extern struct kmem_cache *sas_task_cache; BUG_ON(!list_empty(&task->list)); kmem_cache_free(sas_task_cache, task); } -- cgit v1.2.3-59-g8ed1b From 1e6c38cec08f88b0df88a34e80f15492cace74e9 Mon Sep 17 00:00:00 2001 From: Tony Battersby Date: Fri, 9 Nov 2007 13:04:35 -0500 Subject: [SCSI] 3w-9xxx: fix abysmal write performance on some motherboards The 3ware 9500S-8 SATA RAID controller exhibits terrible write performance when PCI memory-write-and-invalidate is disabled. This is easy to demonstrate by replacing pci_try_set_mwi() in the patch below with pci_clear_mwi(). My benchmarks show the following: MWI disabled: 15 MB/s write, 330 MB/s read MWI enabled: 240 MB/s write, 330 MB/s read Most motherboards will enable MWI without the driver having to set it explicitly, so most people probably wouldn't encounter this problem. For the few motherboards that don't enable it, this patch could give a 16x performance improvement for writing. This issue does not seem to affect the 9550SX controller, but the patch doesn't hurt it either. I haven't tested any of the other 3ware controllers. Signed-off-by: Tony Battersby Acked-by: adam radford Signed-off-by: James Bottomley --- drivers/scsi/3w-9xxx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c index afb262b4be15..1c244832c6c8 100644 --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -2010,6 +2010,7 @@ static int __devinit twa_probe(struct pci_dev *pdev, const struct pci_device_id } pci_set_master(pdev); + pci_try_set_mwi(pdev); if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) || pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) -- cgit v1.2.3-59-g8ed1b From 31ea7088974c2405e19d72f17c2afb103ef19e02 Mon Sep 17 00:00:00 2001 From: bo yang Date: Wed, 7 Nov 2007 12:09:50 -0500 Subject: [SCSI] megaraid_sas: add hibernation support Adding hibernation support. suspend, resume routine implemented. Signed-off-by: Bo Yang Signed-off-by: James Bottomley --- drivers/scsi/megaraid/megaraid_sas.c | 302 +++++++++++++++++++++++++++-------- drivers/scsi/megaraid/megaraid_sas.h | 1 + 2 files changed, 233 insertions(+), 70 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index 3ad379fcd18f..9aee2544798c 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -1803,6 +1803,81 @@ static void megasas_complete_cmd_dpc(unsigned long instance_addr) } +/** + * megasas_issue_init_mfi - Initializes the FW + * @instance: Adapter soft state + * + * Issues the INIT MFI cmd + */ +static int +megasas_issue_init_mfi(struct megasas_instance *instance) +{ + u32 context; + + struct megasas_cmd *cmd; + + struct megasas_init_frame *init_frame; + struct megasas_init_queue_info *initq_info; + dma_addr_t init_frame_h; + dma_addr_t initq_info_h; + + /* + * Prepare a init frame. Note the init frame points to queue info + * structure. Each frame has SGL allocated after first 64 bytes. For + * this frame - since we don't need any SGL - we use SGL's space as + * queue info structure + * + * We will not get a NULL command below. We just created the pool. + */ + cmd = megasas_get_cmd(instance); + + init_frame = (struct megasas_init_frame *)cmd->frame; + initq_info = (struct megasas_init_queue_info *) + ((unsigned long)init_frame + 64); + + init_frame_h = cmd->frame_phys_addr; + initq_info_h = init_frame_h + 64; + + context = init_frame->context; + memset(init_frame, 0, MEGAMFI_FRAME_SIZE); + memset(initq_info, 0, sizeof(struct megasas_init_queue_info)); + init_frame->context = context; + + initq_info->reply_queue_entries = instance->max_fw_cmds + 1; + initq_info->reply_queue_start_phys_addr_lo = instance->reply_queue_h; + + initq_info->producer_index_phys_addr_lo = instance->producer_h; + initq_info->consumer_index_phys_addr_lo = instance->consumer_h; + + init_frame->cmd = MFI_CMD_INIT; + init_frame->cmd_status = 0xFF; + init_frame->queue_info_new_phys_addr_lo = initq_info_h; + + init_frame->data_xfer_len = sizeof(struct megasas_init_queue_info); + + /* + * disable the intr before firing the init frame to FW + */ + instance->instancet->disable_intr(instance->reg_set); + + /* + * Issue the init frame in polled mode + */ + + if (megasas_issue_polled(instance, cmd)) { + printk(KERN_ERR "megasas: Failed to init firmware\n"); + megasas_return_cmd(instance, cmd); + goto fail_fw_init; + } + + megasas_return_cmd(instance, cmd); + + return 0; + +fail_fw_init: + return -EINVAL; +} + /** * megasas_init_mfi - Initializes the FW * @instance: Adapter soft state @@ -1816,15 +1891,7 @@ static int megasas_init_mfi(struct megasas_instance *instance) u32 max_sectors_1; u32 max_sectors_2; struct megasas_register_set __iomem *reg_set; - - struct megasas_cmd *cmd; struct megasas_ctrl_info *ctrl_info; - - struct megasas_init_frame *init_frame; - struct megasas_init_queue_info *initq_info; - dma_addr_t init_frame_h; - dma_addr_t initq_info_h; - /* * Map the message registers */ @@ -1901,52 +1968,8 @@ static int megasas_init_mfi(struct megasas_instance *instance) goto fail_reply_queue; } - /* - * Prepare a init frame. Note the init frame points to queue info - * structure. Each frame has SGL allocated after first 64 bytes. For - * this frame - since we don't need any SGL - we use SGL's space as - * queue info structure - * - * We will not get a NULL command below. We just created the pool. - */ - cmd = megasas_get_cmd(instance); - - init_frame = (struct megasas_init_frame *)cmd->frame; - initq_info = (struct megasas_init_queue_info *) - ((unsigned long)init_frame + 64); - - init_frame_h = cmd->frame_phys_addr; - initq_info_h = init_frame_h + 64; - - memset(init_frame, 0, MEGAMFI_FRAME_SIZE); - memset(initq_info, 0, sizeof(struct megasas_init_queue_info)); - - initq_info->reply_queue_entries = instance->max_fw_cmds + 1; - initq_info->reply_queue_start_phys_addr_lo = instance->reply_queue_h; - - initq_info->producer_index_phys_addr_lo = instance->producer_h; - initq_info->consumer_index_phys_addr_lo = instance->consumer_h; - - init_frame->cmd = MFI_CMD_INIT; - init_frame->cmd_status = 0xFF; - init_frame->queue_info_new_phys_addr_lo = initq_info_h; - - init_frame->data_xfer_len = sizeof(struct megasas_init_queue_info); - - /* - * disable the intr before firing the init frame to FW - */ - instance->instancet->disable_intr(instance->reg_set); - - /* - * Issue the init frame in polled mode - */ - if (megasas_issue_polled(instance, cmd)) { - printk(KERN_DEBUG "megasas: Failed to init firmware\n"); + if (megasas_issue_init_mfi(instance)) goto fail_fw_init; - } - - megasas_return_cmd(instance, cmd); ctrl_info = kmalloc(sizeof(struct megasas_ctrl_info), GFP_KERNEL); @@ -1982,7 +2005,6 @@ static int megasas_init_mfi(struct megasas_instance *instance) return 0; fail_fw_init: - megasas_return_cmd(instance, cmd); pci_free_consistent(instance->pdev, reply_q_sz, instance->reply_queue, instance->reply_queue_h); @@ -2264,6 +2286,28 @@ static int megasas_io_attach(struct megasas_instance *instance) return 0; } +static int +megasas_set_dma_mask(struct pci_dev *pdev) +{ + /* + * All our contollers are capable of performing 64-bit DMA + */ + if (IS_DMA64) { + if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) != 0) { + + if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) + goto fail_set_dma_mask; + } + } else { + if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) + goto fail_set_dma_mask; + } + return 0; + +fail_set_dma_mask: + return 1; +} + /** * megasas_probe_one - PCI hotplug entry point * @pdev: PCI device structure @@ -2297,19 +2341,8 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) pci_set_master(pdev); - /* - * All our contollers are capable of performing 64-bit DMA - */ - if (IS_DMA64) { - if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) != 0) { - - if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) - goto fail_set_dma_mask; - } - } else { - if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) - goto fail_set_dma_mask; - } + if (megasas_set_dma_mask(pdev)) + goto fail_set_dma_mask; host = scsi_host_alloc(&megasas_template, sizeof(struct megasas_instance)); @@ -2491,8 +2524,10 @@ static void megasas_flush_cache(struct megasas_instance *instance) /** * megasas_shutdown_controller - Instructs FW to shutdown the controller * @instance: Adapter soft state + * @opcode: Shutdown/Hibernate */ -static void megasas_shutdown_controller(struct megasas_instance *instance) +static void megasas_shutdown_controller(struct megasas_instance *instance, + u32 opcode) { struct megasas_cmd *cmd; struct megasas_dcmd_frame *dcmd; @@ -2515,7 +2550,7 @@ static void megasas_shutdown_controller(struct megasas_instance *instance) dcmd->flags = MFI_FRAME_DIR_NONE; dcmd->timeout = 0; dcmd->data_xfer_len = 0; - dcmd->opcode = MR_DCMD_CTRL_SHUTDOWN; + dcmd->opcode = opcode; megasas_issue_blocked_cmd(instance, cmd); @@ -2524,6 +2559,131 @@ static void megasas_shutdown_controller(struct megasas_instance *instance) return; } +/** + * megasas_suspend - driver suspend entry point + * @pdev: PCI device structure + * @state: PCI power state to suspend routine + */ +static int __devinit +megasas_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct Scsi_Host *host; + struct megasas_instance *instance; + + instance = pci_get_drvdata(pdev); + host = instance->host; + + megasas_flush_cache(instance); + megasas_shutdown_controller(instance, MR_DCMD_HIBERNATE_SHUTDOWN); + tasklet_kill(&instance->isr_tasklet); + + pci_set_drvdata(instance->pdev, instance); + instance->instancet->disable_intr(instance->reg_set); + free_irq(instance->pdev->irq, instance); + + pci_save_state(pdev); + pci_disable_device(pdev); + + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + + return 0; +} + +/** + * megasas_resume- driver resume entry point + * @pdev: PCI device structure + */ +static int __devinit +megasas_resume(struct pci_dev *pdev) +{ + int rval; + struct Scsi_Host *host; + struct megasas_instance *instance; + + instance = pci_get_drvdata(pdev); + host = instance->host; + pci_set_power_state(pdev, PCI_D0); + pci_enable_wake(pdev, PCI_D0, 0); + pci_restore_state(pdev); + + /* + * PCI prepping: enable device set bus mastering and dma mask + */ + rval = pci_enable_device(pdev); + + if (rval) { + printk(KERN_ERR "megasas: Enable device failed\n"); + return rval; + } + + pci_set_master(pdev); + + if (megasas_set_dma_mask(pdev)) + goto fail_set_dma_mask; + + /* + * Initialize MFI Firmware + */ + + *instance->producer = 0; + *instance->consumer = 0; + + atomic_set(&instance->fw_outstanding, 0); + + /* + * We expect the FW state to be READY + */ + if (megasas_transition_to_ready(instance)) + goto fail_ready_state; + + if (megasas_issue_init_mfi(instance)) + goto fail_init_mfi; + + tasklet_init(&instance->isr_tasklet, megasas_complete_cmd_dpc, + (unsigned long)instance); + + /* + * Register IRQ + */ + if (request_irq(pdev->irq, megasas_isr, IRQF_SHARED, + "megasas", instance)) { + printk(KERN_ERR "megasas: Failed to register IRQ\n"); + goto fail_irq; + } + + instance->instancet->enable_intr(instance->reg_set); + + /* + * Initiate AEN (Asynchronous Event Notification) + */ + if (megasas_start_aen(instance)) + printk(KERN_ERR "megasas: Start AEN failed\n"); + + return 0; + +fail_irq: +fail_init_mfi: + if (instance->evt_detail) + pci_free_consistent(pdev, sizeof(struct megasas_evt_detail), + instance->evt_detail, + instance->evt_detail_h); + + if (instance->producer) + pci_free_consistent(pdev, sizeof(u32), instance->producer, + instance->producer_h); + if (instance->consumer) + pci_free_consistent(pdev, sizeof(u32), instance->consumer, + instance->consumer_h); + scsi_host_put(host); + +fail_set_dma_mask: +fail_ready_state: + + pci_disable_device(pdev); + + return -ENODEV; +} + /** * megasas_detach_one - PCI hot"un"plug entry point * @pdev: PCI device structure @@ -2539,7 +2699,7 @@ static void megasas_detach_one(struct pci_dev *pdev) scsi_remove_host(instance->host); megasas_flush_cache(instance); - megasas_shutdown_controller(instance); + megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN); tasklet_kill(&instance->isr_tasklet); /* @@ -2978,6 +3138,8 @@ static struct pci_driver megasas_pci_driver = { .id_table = megasas_pci_table, .probe = megasas_probe_one, .remove = __devexit_p(megasas_detach_one), + .suspend = megasas_suspend, + .resume = megasas_resume, .shutdown = megasas_shutdown, }; diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index 08c74c991781..f4ab30094621 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -117,6 +117,7 @@ #define MR_FLUSH_DISK_CACHE 0x02 #define MR_DCMD_CTRL_SHUTDOWN 0x01050000 +#define MR_DCMD_HIBERNATE_SHUTDOWN 0x01060000 #define MR_ENABLE_DRIVE_SPINDOWN 0x01 #define MR_DCMD_CTRL_EVENT_GET_INFO 0x01040100 -- cgit v1.2.3-59-g8ed1b From 14faea9f7fe1e8805629b50cf14a65a85fe4a4fd Mon Sep 17 00:00:00 2001 From: bo yang Date: Fri, 9 Nov 2007 04:14:00 -0500 Subject: [SCSI] megaraid_sas: check max_sgl reported by FW for setting max_sectors_per_req 1. Setting the max_sectors_per_req based on max SGL supported by the FW. Prior versions calculated this value from controller info's max_sectors_1, max_sectors_2. For certain controllers/FW, this was resulting in a value greater than max SGL supported by the FW. Now we take the min of max sgl from FW and max_sectors calculation. 2. Increased MFI_POLL_TIMEOUT_SECS to 60 seconds from 10. FW may take a max of 60 seconds to respond to the INIT cmd. Signed-off-by: Bo Yang Signed-off-by: James Bottomley --- drivers/scsi/megaraid/megaraid_sas.c | 14 +++++++++----- drivers/scsi/megaraid/megaraid_sas.h | 2 +- 2 files changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index 9aee2544798c..7eefbe0681d6 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -1890,6 +1890,7 @@ static int megasas_init_mfi(struct megasas_instance *instance) u32 reply_q_sz; u32 max_sectors_1; u32 max_sectors_2; + u32 tmp_sectors; struct megasas_register_set __iomem *reg_set; struct megasas_ctrl_info *ctrl_info; /* @@ -1982,17 +1983,20 @@ static int megasas_init_mfi(struct megasas_instance *instance) * Note that older firmwares ( < FW ver 30) didn't report information * to calculate max_sectors_1. So the number ended up as zero always. */ + tmp_sectors = 0; if (ctrl_info && !megasas_get_ctrl_info(instance, ctrl_info)) { max_sectors_1 = (1 << ctrl_info->stripe_sz_ops.min) * ctrl_info->max_strips_per_io; max_sectors_2 = ctrl_info->max_request_size; - instance->max_sectors_per_req = (max_sectors_1 < max_sectors_2) - ? max_sectors_1 : max_sectors_2; - } else - instance->max_sectors_per_req = instance->max_num_sge * - PAGE_SIZE / 512; + tmp_sectors = min_t(u32, max_sectors_1 , max_sectors_2); + } + + instance->max_sectors_per_req = instance->max_num_sge * + PAGE_SIZE / 512; + if (tmp_sectors && (instance->max_sectors_per_req > tmp_sectors)) + instance->max_sectors_per_req = tmp_sectors; kfree(ctrl_info); diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index f4ab30094621..9739023a222c 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -571,7 +571,7 @@ struct megasas_ctrl_info { #define IS_DMA64 (sizeof(dma_addr_t) == 8) #define MFI_OB_INTR_STATUS_MASK 0x00000002 -#define MFI_POLL_TIMEOUT_SECS 10 +#define MFI_POLL_TIMEOUT_SECS 60 #define MFI_REPLY_1078_MESSAGE_INTERRUPT 0x80000000 -- cgit v1.2.3-59-g8ed1b From b10c36a57552f03582c0ab3ece04f3cce791922d Mon Sep 17 00:00:00 2001 From: bo yang Date: Fri, 9 Nov 2007 04:28:47 -0500 Subject: [SCSI] megaraid_sas: use unsigned long for sense_buff ptr MegaRAID utilities expect sense_buff to be of type unsigned long. Signed-off-by: Bo Yang Signed-off-by: James Bottomley --- drivers/scsi/megaraid/megaraid_sas.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index 7eefbe0681d6..a58ad61aa36a 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -2825,6 +2825,7 @@ megasas_mgmt_fw_ioctl(struct megasas_instance *instance, void *sense = NULL; dma_addr_t sense_handle; u32 *sense_ptr; + unsigned long *sense_buff; memset(kbuff_arr, 0, sizeof(kbuff_arr)); @@ -2929,14 +2930,16 @@ megasas_mgmt_fw_ioctl(struct megasas_instance *instance, */ if (ioc->sense_len) { /* - * sense_ptr points to the location that has the user + * sense_buff points to the location that has the user * sense buffer address */ - sense_ptr = (u32 *) ((unsigned long)ioc->frame.raw + - ioc->sense_off); + sense_buff = (unsigned long *) ((unsigned long)ioc->frame.raw + + ioc->sense_off); - if (copy_to_user((void __user *)((unsigned long)(*sense_ptr)), - sense, ioc->sense_len)) { + if (copy_to_user((void __user *)(unsigned long)(*sense_buff), + sense, ioc->sense_len)) { + printk(KERN_ERR "megasas: Failed to copy out to user " + "sense data\n"); error = -EFAULT; goto out; } -- cgit v1.2.3-59-g8ed1b From 7343eb6570ae3b299e7b5185b139d8335ef60e9b Mon Sep 17 00:00:00 2001 From: bo yang Date: Fri, 9 Nov 2007 04:35:44 -0500 Subject: [SCSI] megaraid_sas: call cmd completion from reset Driver will call cmd completion routine from Reset path without waiting for cmd completion from isr context. Signed-off-by: Bo Yang Signed-off-by: James Bottomley --- drivers/scsi/megaraid/megaraid_sas.c | 122 +++++++++++++++++++---------------- drivers/scsi/megaraid/megaraid_sas.h | 2 + 2 files changed, 70 insertions(+), 54 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index a58ad61aa36a..08c3d4315eb8 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -77,6 +77,10 @@ static DEFINE_MUTEX(megasas_async_queue_mutex); static u32 megasas_dbg_lvl; +static void +megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd, + u8 alt_status); + /** * megasas_get_cmd - Get a command from the free pool * @instance: Adapter soft state @@ -886,6 +890,64 @@ static int megasas_slave_configure(struct scsi_device *sdev) return 0; } +/** + * megasas_complete_cmd_dpc - Returns FW's controller structure + * @instance_addr: Address of adapter soft state + * + * Tasklet to complete cmds + */ +static void megasas_complete_cmd_dpc(unsigned long instance_addr) +{ + u32 producer; + u32 consumer; + u32 context; + struct megasas_cmd *cmd; + struct megasas_instance *instance = + (struct megasas_instance *)instance_addr; + unsigned long flags; + + /* If we have already declared adapter dead, donot complete cmds */ + if (instance->hw_crit_error) + return; + + spin_lock_irqsave(&instance->completion_lock, flags); + + producer = *instance->producer; + consumer = *instance->consumer; + + while (consumer != producer) { + context = instance->reply_queue[consumer]; + + cmd = instance->cmd_list[context]; + + megasas_complete_cmd(instance, cmd, DID_OK); + + consumer++; + if (consumer == (instance->max_fw_cmds + 1)) { + consumer = 0; + } + } + + *instance->consumer = producer; + + spin_unlock_irqrestore(&instance->completion_lock, flags); + + /* + * Check if we can restore can_queue + */ + if (instance->flag & MEGASAS_FW_BUSY + && time_after(jiffies, instance->last_time + 5 * HZ) + && atomic_read(&instance->fw_outstanding) < 17) { + + spin_lock_irqsave(instance->host->host_lock, flags); + instance->flag &= ~MEGASAS_FW_BUSY; + instance->host->can_queue = + instance->max_fw_cmds - MEGASAS_INT_CMDS; + + spin_unlock_irqrestore(instance->host->host_lock, flags); + } +} + /** * megasas_wait_for_outstanding - Wait for all outstanding cmds * @instance: Adapter soft state @@ -909,6 +971,11 @@ static int megasas_wait_for_outstanding(struct megasas_instance *instance) if (!(i % MEGASAS_RESET_NOTICE_INTERVAL)) { printk(KERN_NOTICE "megasas: [%2d]waiting for %d " "commands to complete\n",i,outstanding); + /* + * Call cmd completion routine. Cmd to be + * be completed directly without depending on isr. + */ + megasas_complete_cmd_dpc((unsigned long)instance); } msleep(1000); @@ -1749,60 +1816,6 @@ megasas_get_ctrl_info(struct megasas_instance *instance, return ret; } -/** - * megasas_complete_cmd_dpc - Returns FW's controller structure - * @instance_addr: Address of adapter soft state - * - * Tasklet to complete cmds - */ -static void megasas_complete_cmd_dpc(unsigned long instance_addr) -{ - u32 producer; - u32 consumer; - u32 context; - struct megasas_cmd *cmd; - struct megasas_instance *instance = (struct megasas_instance *)instance_addr; - unsigned long flags; - - /* If we have already declared adapter dead, donot complete cmds */ - if (instance->hw_crit_error) - return; - - producer = *instance->producer; - consumer = *instance->consumer; - - while (consumer != producer) { - context = instance->reply_queue[consumer]; - - cmd = instance->cmd_list[context]; - - megasas_complete_cmd(instance, cmd, DID_OK); - - consumer++; - if (consumer == (instance->max_fw_cmds + 1)) { - consumer = 0; - } - } - - *instance->consumer = producer; - - /* - * Check if we can restore can_queue - */ - if (instance->flag & MEGASAS_FW_BUSY - && time_after(jiffies, instance->last_time + 5 * HZ) - && atomic_read(&instance->fw_outstanding) < 17) { - - spin_lock_irqsave(instance->host->host_lock, flags); - instance->flag &= ~MEGASAS_FW_BUSY; - instance->host->can_queue = - instance->max_fw_cmds - MEGASAS_INT_CMDS; - - spin_unlock_irqrestore(instance->host->host_lock, flags); - } - -} - /** * megasas_issue_init_mfi - Initializes the FW * @instance: Adapter soft state @@ -2395,6 +2408,7 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) init_waitqueue_head(&instance->abort_cmd_wait_q); spin_lock_init(&instance->cmd_pool_lock); + spin_lock_init(&instance->completion_lock); mutex_init(&instance->aen_mutex); sema_init(&instance->ioctl_sem, MEGASAS_INT_CMDS); diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index 9739023a222c..c3575a304c6a 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -1084,6 +1084,8 @@ struct megasas_instance { struct megasas_cmd **cmd_list; struct list_head cmd_pool; spinlock_t cmd_pool_lock; + /* used to synch producer, consumer ptrs in dpc */ + spinlock_t completion_lock; struct dma_pool *frame_dma_pool; struct dma_pool *sense_dma_pool; -- cgit v1.2.3-59-g8ed1b From ad84db2e2e1817bb8a29e7c9108eb66bf023d99f Mon Sep 17 00:00:00 2001 From: bo yang Date: Fri, 9 Nov 2007 04:40:16 -0500 Subject: [SCSI] megaraid_sas: support for poll_mode_io (reduced interrupt) Added module parameter "poll_mode_io" to support for "polling" (reduced interrupt operation). In this mode, IO completion interrupts are delayed. At the end of initiating IOs, the driver schedules for cmd completion if there are pending cmds. A timer-based interrupt has also been added to prevent IO completion from being delayed indefinitely in the case that no new IOs are initiated. Some formatting issues in resume, suspend comment block also corrected Signed-off-by: Bo Yang Signed-off-by: James Bottomley --- drivers/scsi/megaraid/megaraid_sas.c | 152 +++++++++++++++++++++++++++++++++-- drivers/scsi/megaraid/megaraid_sas.h | 3 + 2 files changed, 149 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index 08c3d4315eb8..499f994f503d 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -47,6 +47,14 @@ #include #include "megaraid_sas.h" +/* + * poll_mode_io:1- schedule complete completion from q cmd + */ +static unsigned int poll_mode_io; +module_param_named(poll_mode_io, poll_mode_io, int, 0); +MODULE_PARM_DESC(poll_mode_io, + "Complete cmds from IO path, (default=0)"); + MODULE_LICENSE("GPL"); MODULE_VERSION(MEGASAS_VERSION); MODULE_AUTHOR("megaraidlinux@lsi.com"); @@ -860,6 +868,12 @@ megasas_queue_command(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *)) atomic_inc(&instance->fw_outstanding); instance->instancet->fire_cmd(cmd->frame_phys_addr ,cmd->frame_count-1,instance->reg_set); + /* + * Check if we have pend cmds to be completed + */ + if (poll_mode_io && atomic_read(&instance->fw_outstanding)) + tasklet_schedule(&instance->isr_tasklet); + return 0; @@ -1891,6 +1905,47 @@ fail_fw_init: return -EINVAL; } +/** + * megasas_start_timer - Initializes a timer object + * @instance: Adapter soft state + * @timer: timer object to be initialized + * @fn: timer function + * @interval: time interval between timer function call + */ +static inline void +megasas_start_timer(struct megasas_instance *instance, + struct timer_list *timer, + void *fn, unsigned long interval) +{ + init_timer(timer); + timer->expires = jiffies + interval; + timer->data = (unsigned long)instance; + timer->function = fn; + add_timer(timer); +} + +/** + * megasas_io_completion_timer - Timer fn + * @instance_addr: Address of adapter soft state + * + * Schedules tasklet for cmd completion + * if poll_mode_io is set + */ +static void +megasas_io_completion_timer(unsigned long instance_addr) +{ + struct megasas_instance *instance = + (struct megasas_instance *)instance_addr; + + if (atomic_read(&instance->fw_outstanding)) + tasklet_schedule(&instance->isr_tasklet); + + /* Restart timer */ + if (poll_mode_io) + mod_timer(&instance->io_completion_timer, + jiffies + MEGASAS_COMPLETION_TIMER_INTERVAL); +} + /** * megasas_init_mfi - Initializes the FW * @instance: Adapter soft state @@ -2017,8 +2072,14 @@ static int megasas_init_mfi(struct megasas_instance *instance) * Setup tasklet for cmd completion */ - tasklet_init(&instance->isr_tasklet, megasas_complete_cmd_dpc, - (unsigned long)instance); + tasklet_init(&instance->isr_tasklet, megasas_complete_cmd_dpc, + (unsigned long)instance); + + /* Initialize the cmd completion timer */ + if (poll_mode_io) + megasas_start_timer(instance, &instance->io_completion_timer, + megasas_io_completion_timer, + MEGASAS_COMPLETION_TIMER_INTERVAL); return 0; fail_fw_init: @@ -2578,8 +2639,8 @@ static void megasas_shutdown_controller(struct megasas_instance *instance, } /** - * megasas_suspend - driver suspend entry point - * @pdev: PCI device structure + * megasas_suspend - driver suspend entry point + * @pdev: PCI device structure * @state: PCI power state to suspend routine */ static int __devinit @@ -2591,6 +2652,9 @@ megasas_suspend(struct pci_dev *pdev, pm_message_t state) instance = pci_get_drvdata(pdev); host = instance->host; + if (poll_mode_io) + del_timer_sync(&instance->io_completion_timer); + megasas_flush_cache(instance); megasas_shutdown_controller(instance, MR_DCMD_HIBERNATE_SHUTDOWN); tasklet_kill(&instance->isr_tasklet); @@ -2677,6 +2741,11 @@ megasas_resume(struct pci_dev *pdev) if (megasas_start_aen(instance)) printk(KERN_ERR "megasas: Start AEN failed\n"); + /* Initialize the cmd completion timer */ + if (poll_mode_io) + megasas_start_timer(instance, &instance->io_completion_timer, + megasas_io_completion_timer, + MEGASAS_COMPLETION_TIMER_INTERVAL); return 0; fail_irq: @@ -2715,6 +2784,9 @@ static void megasas_detach_one(struct pci_dev *pdev) instance = pci_get_drvdata(pdev); host = instance->host; + if (poll_mode_io) + del_timer_sync(&instance->io_completion_timer); + scsi_remove_host(instance->host); megasas_flush_cache(instance); megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN); @@ -3188,7 +3260,7 @@ static DRIVER_ATTR(release_date, S_IRUGO, megasas_sysfs_show_release_date, static ssize_t megasas_sysfs_show_dbg_lvl(struct device_driver *dd, char *buf) { - return sprintf(buf,"%u",megasas_dbg_lvl); + return sprintf(buf, "%u\n", megasas_dbg_lvl); } static ssize_t @@ -3203,7 +3275,65 @@ megasas_sysfs_set_dbg_lvl(struct device_driver *dd, const char *buf, size_t coun } static DRIVER_ATTR(dbg_lvl, S_IRUGO|S_IWUGO, megasas_sysfs_show_dbg_lvl, - megasas_sysfs_set_dbg_lvl); + megasas_sysfs_set_dbg_lvl); + +static ssize_t +megasas_sysfs_show_poll_mode_io(struct device_driver *dd, char *buf) +{ + return sprintf(buf, "%u\n", poll_mode_io); +} + +static ssize_t +megasas_sysfs_set_poll_mode_io(struct device_driver *dd, + const char *buf, size_t count) +{ + int retval = count; + int tmp = poll_mode_io; + int i; + struct megasas_instance *instance; + + if (sscanf(buf, "%u", &poll_mode_io) < 1) { + printk(KERN_ERR "megasas: could not set poll_mode_io\n"); + retval = -EINVAL; + } + + /* + * Check if poll_mode_io is already set or is same as previous value + */ + if ((tmp && poll_mode_io) || (tmp == poll_mode_io)) + goto out; + + if (poll_mode_io) { + /* + * Start timers for all adapters + */ + for (i = 0; i < megasas_mgmt_info.max_index; i++) { + instance = megasas_mgmt_info.instance[i]; + if (instance) { + megasas_start_timer(instance, + &instance->io_completion_timer, + megasas_io_completion_timer, + MEGASAS_COMPLETION_TIMER_INTERVAL); + } + } + } else { + /* + * Delete timers for all adapters + */ + for (i = 0; i < megasas_mgmt_info.max_index; i++) { + instance = megasas_mgmt_info.instance[i]; + if (instance) + del_timer_sync(&instance->io_completion_timer); + } + } + +out: + return retval; +} + +static DRIVER_ATTR(poll_mode_io, S_IRUGO|S_IWUGO, + megasas_sysfs_show_poll_mode_io, + megasas_sysfs_set_poll_mode_io); /** * megasas_init - Driver load entry point @@ -3254,8 +3384,16 @@ static int __init megasas_init(void) &driver_attr_dbg_lvl); if (rval) goto err_dcf_dbg_lvl; + rval = driver_create_file(&megasas_pci_driver.driver, + &driver_attr_poll_mode_io); + if (rval) + goto err_dcf_poll_mode_io; return rval; + +err_dcf_poll_mode_io: + driver_remove_file(&megasas_pci_driver.driver, + &driver_attr_dbg_lvl); err_dcf_dbg_lvl: driver_remove_file(&megasas_pci_driver.driver, &driver_attr_release_date); @@ -3273,6 +3411,8 @@ err_pcidrv: */ static void __exit megasas_exit(void) { + driver_remove_file(&megasas_pci_driver.driver, + &driver_attr_poll_mode_io); driver_remove_file(&megasas_pci_driver.driver, &driver_attr_dbg_lvl); driver_remove_file(&megasas_pci_driver.driver, diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index c3575a304c6a..dcc66fc9c2cb 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -572,6 +572,7 @@ struct megasas_ctrl_info { #define MFI_OB_INTR_STATUS_MASK 0x00000002 #define MFI_POLL_TIMEOUT_SECS 60 +#define MEGASAS_COMPLETION_TIMER_INTERVAL (HZ/10) #define MFI_REPLY_1078_MESSAGE_INTERRUPT 0x80000000 @@ -1111,6 +1112,8 @@ struct megasas_instance { u8 flag; unsigned long last_time; + + struct timer_list io_completion_timer; }; #define MEGASAS_IS_LOGICAL(scp) \ -- cgit v1.2.3-59-g8ed1b From f28cd7cf8f696eafe42d1632b5a306fbf784d3cd Mon Sep 17 00:00:00 2001 From: bo yang Date: Fri, 9 Nov 2007 04:44:56 -0500 Subject: [SCSI] megaraid_sas: Update version and changelog Update version and changelog Signed-off-by: Bo Yang Signed-off-by: James Bottomley --- Documentation/scsi/ChangeLog.megaraid_sas | 159 ++++++++++++++++++++++++++++++ drivers/scsi/megaraid/megaraid_sas.c | 10 +- drivers/scsi/megaraid/megaraid_sas.h | 8 +- 3 files changed, 168 insertions(+), 9 deletions(-) diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas index 5eb927544990..91c81db0ba71 100644 --- a/Documentation/scsi/ChangeLog.megaraid_sas +++ b/Documentation/scsi/ChangeLog.megaraid_sas @@ -1,3 +1,162 @@ +1 Release Date : Thur. Nov. 07 16:30:43 PST 2007 - + (emaild-id:megaraidlinux@lsi.com) + Sumant Patro + Bo Yang + +2 Current Version : 00.00.03.16 +3 Older Version : 00.00.03.15 + +1. Increased MFI_POLL_TIMEOUT_SECS to 60 seconds from 10. FW may take + a max of 60 seconds to respond to the INIT cmd. + +1 Release Date : Fri. Sep. 07 16:30:43 PST 2007 - + (emaild-id:megaraidlinux@lsi.com) + Sumant Patro + Bo Yang + +2 Current Version : 00.00.03.15 +3 Older Version : 00.00.03.14 + +1. Added module parameter "poll_mode_io" to support for "polling" + (reduced interrupt operation). In this mode, IO completion + interrupts are delayed. At the end of initiating IOs, the + driver schedules for cmd completion if there are pending cmds + to be completed. A timer-based interrupt has also been added + to prevent IO completion processing from being delayed + indefinitely in the case that no new IOs are initiated. + +1 Release Date : Fri. Sep. 07 16:30:43 PST 2007 - + (emaild-id:megaraidlinux@lsi.com) + Sumant Patro + Bo Yang + +2 Current Version : 00.00.03.14 +3 Older Version : 00.00.03.13 + +1. Setting the max_sectors_per_req based on max SGL supported by the + FW. Prior versions calculated this value from controller info + (max_sectors_1, max_sectors_2). For certain controllers/FW, + this was resulting in a value greater than max SGL supported + by the FW. Issue was first reported by users running LUKS+XFS + with megaraid_sas. Thanks to RB for providing the logs and + duplication steps that helped to get to the root cause of the + issue. 2. Increased MFI_POLL_TIMEOUT_SECS to 60 seconds from + 10. FW may take a max of 60 seconds to respond to the INIT + cmd. + +1 Release Date : Fri. June. 15 16:30:43 PST 2007 - + (emaild-id:megaraidlinux@lsi.com) + Sumant Patro + Bo Yang + +2 Current Version : 00.00.03.13 +3 Older Version : 00.00.03.12 + +1. Added the megasas_reset_timer routine to intercept cmd timeout and throttle io. + +On Fri, 2007-03-16 at 16:44 -0600, James Bottomley wrote: +It looks like megaraid_sas at least needs this to throttle its commands +> as they begin to time out. The code keeps the existing transport +> template use of eh_timed_out (and allows the transport to override the +> host if they both have this callback). +> +> James + +1 Release Date : Sat May. 12 16:30:43 PST 2007 - + (emaild-id:megaraidlinux@lsi.com) + Sumant Patro + Bo Yang + +2 Current Version : 00.00.03.12 +3 Older Version : 00.00.03.11 + +1. When MegaSAS driver receives reset call from OS, driver waits in reset +routine for max 3 minutes for all pending command completion. Now driver will +call completion routine every 5 seconds from the reset routine instead of +waiting for depending on cmd completion from isr path. + +1 Release Date : Mon Apr. 30 10:25:52 PST 2007 - + (emaild-id:megaraidlinux@lsi.com) + Sumant Patro + Bo Yang + +2 Current Version : 00.00.03.11 +3 Older Version : 00.00.03.09 + + 1. Memory Manager for IOCTL removed for 2.6 kernels. + pci_alloc_consistent replaced by dma_alloc_coherent. With this + change there is no need of memory manager in the driver code + + On Wed, 2007-02-07 at 13:30 -0800, Andrew Morton wrote: + > I suspect all this horror is due to stupidity in the DMA API. + > + > pci_alloc_consistent() just goes and assumes GFP_ATOMIC, whereas + > the caller (megasas_mgmt_fw_ioctl) would have been perfectly happy + > to use GFP_KERNEL. + > + > I bet this fixes it + + It does, but the DMA API was expanded to cope with this exact case, so + use dma_alloc_coherent() directly in the megaraid code instead. The dev + is just &pci_dev->dev. + + James + + 3. SYNCHRONIZE_CACHE is not supported by FW and thus blocked by driver. + 4. Hibernation support added + 5. Performing diskdump while running IO in RHEL 4 was failing. Fixed. + +1 Release Date : Fri Feb. 09 14:36:28 PST 2007 - + (emaild-id:megaraidlinux@lsi.com) + Sumant Patro + Bo Yang + +2 Current Version : 00.00.03.09 +3 Older Version : 00.00.03.08 + +i. Under heavy IO mid-layer prints "DRIVER_TIMEOUT" errors + + The driver now waits for 10 seconds to elapse instead of 5 (as in + previous release) to resume IO. + +1 Release Date : Mon Feb. 05 11:35:24 PST 2007 - + (emaild-id:megaraidlinux@lsi.com) + Sumant Patro + Bo Yang +2 Current Version : 00.00.03.08 +3 Older Version : 00.00.03.07 + +i. Under heavy IO mid-layer prints "DRIVER_TIMEOUT" errors + + Fix: The driver is now throttling IO. + Checks added in megasas_queue_command to know if FW is able to + process commands within timeout period. If number of retries + is 2 or greater,the driver stops sending cmd to FW temporarily. IO is + resumed if pending cmd count reduces to 16 or 5 seconds has elapsed + from the time cmds were last sent to FW. + +ii. FW enables WCE bit in Mode Sense cmd for drives that are configured + as WriteBack. The OS may send "SYNCHRONIZE_CACHE" cmd when Logical + Disks are exposed with WCE=1. User is advised to enable Write Back + mode only when the controller has battery backup. At this time + Synhronize cache is not supported by the FW. Driver will short-cycle + the cmd and return sucess without sending down to FW. + +1 Release Date : Sun Jan. 14 11:21:32 PDT 2007 - + Sumant Patro /Bo Yang +2 Current Version : 00.00.03.07 +3 Older Version : 00.00.03.06 + +i. bios_param entry added in scsi_host_template that returns disk geometry + information. + +1 Release Date : Fri Oct 20 11:21:32 PDT 2006 - Sumant Patro /Bo Yang +2 Current Version : 00.00.03.06 +3 Older Version : 00.00.03.05 + +1. Added new memory management module to support the IOCTL memory allocation. For IOCTL we try to allocate from the memory pool created during driver initialization. If mem pool is empty then we allocate at run time. +2. Added check in megasas_queue_command and dpc/isr routine to see if we have already declared adapter dead + (hw_crit_error=1). If hw_crit_error==1, now we donot accept any processing of pending cmds/accept any cmd from OS 1 Release Date : Mon Oct 02 11:21:32 PDT 2006 - Sumant Patro 2 Current Version : 00.00.03.05 diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index 499f994f503d..d7ec921865c4 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -2,7 +2,7 @@ * * Linux MegaRAID driver for SAS based RAID controllers * - * Copyright (c) 2003-2005 LSI Logic Corporation. + * Copyright (c) 2003-2005 LSI Corporation. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -10,7 +10,7 @@ * 2 of the License, or (at your option) any later version. * * FILE : megaraid_sas.c - * Version : v00.00.03.10-rc5 + * Version : v00.00.03.16-rc1 * * Authors: * (email-id : megaraidlinux@lsi.com) @@ -58,7 +58,7 @@ MODULE_PARM_DESC(poll_mode_io, MODULE_LICENSE("GPL"); MODULE_VERSION(MEGASAS_VERSION); MODULE_AUTHOR("megaraidlinux@lsi.com"); -MODULE_DESCRIPTION("LSI Logic MegaRAID SAS Driver"); +MODULE_DESCRIPTION("LSI MegaRAID SAS Driver"); /* * PCI ID table for all supported controllers @@ -1182,7 +1182,7 @@ megasas_service_aen(struct megasas_instance *instance, struct megasas_cmd *cmd) static struct scsi_host_template megasas_template = { .module = THIS_MODULE, - .name = "LSI Logic SAS based MegaRAID driver", + .name = "LSI SAS based MegaRAID driver", .proc_name = "megaraid_sas", .slave_configure = megasas_slave_configure, .queuecommand = megasas_queue_command, @@ -1966,7 +1966,7 @@ static int megasas_init_mfi(struct megasas_instance *instance) */ instance->base_addr = pci_resource_start(instance->pdev, 0); - if (pci_request_regions(instance->pdev, "megasas: LSI Logic")) { + if (pci_request_regions(instance->pdev, "megasas: LSI")) { printk(KERN_DEBUG "megasas: IO memory region busy!\n"); return -EBUSY; } diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index dcc66fc9c2cb..6466bdf548c2 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -2,7 +2,7 @@ * * Linux MegaRAID driver for SAS based RAID controllers * - * Copyright (c) 2003-2005 LSI Logic Corporation. + * Copyright (c) 2003-2005 LSI Corporation. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -18,9 +18,9 @@ /* * MegaRAID SAS Driver meta data */ -#define MEGASAS_VERSION "00.00.03.10-rc5" -#define MEGASAS_RELDATE "May 17, 2007" -#define MEGASAS_EXT_VERSION "Thu May 17 10:09:32 PDT 2007" +#define MEGASAS_VERSION "00.00.03.16-rc1" +#define MEGASAS_RELDATE "Nov. 07, 2007" +#define MEGASAS_EXT_VERSION "Thu. Nov. 07 10:09:32 PDT 2007" /* * Device IDs -- cgit v1.2.3-59-g8ed1b From 25d7c363f2663fe399e623c9bd819258c9760bdc Mon Sep 17 00:00:00 2001 From: Tony Battersby Date: Mon, 12 Nov 2007 10:00:44 -0500 Subject: [SCSI] move single_lun flag from scsi_device to scsi_target Some SCSI tape medium changers that need the BLIST_SINGLELUN flag have the medium changer at one LUN and the tape drive at a different LUN. The inquiry string of the tape drive may be different from that of the medium changer. In order for single_lun to be effective, every scsi_device under a given scsi_target must have it set. This means that there needs to be a blacklist entry for BOTH the medium changer AND the tape drive, which is impractical because some medium changers may be paired with a variety of different tape drive models. It makes more sense to put the single_lun flag in scsi_target instead of scsi_device, which causes every device at a given target ID to inherit the single_lun flag from one LUN. This makes it possible to blacklist just the medium changer and not the tape drive. Signed-off-by: Tony Battersby Signed-off-by: James Bottomley --- drivers/scsi/scsi_lib.c | 4 ++-- drivers/scsi/scsi_scan.c | 2 +- include/scsi/scsi_device.h | 6 +++--- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 199b02452259..b0c59ae63a2f 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -526,7 +526,7 @@ static void scsi_run_queue(struct request_queue *q) struct Scsi_Host *shost = sdev->host; unsigned long flags; - if (sdev->single_lun) + if (scsi_target(sdev)->single_lun) scsi_single_lun_run(sdev); spin_lock_irqsave(shost->host_lock, flags); @@ -1559,7 +1559,7 @@ static void scsi_request_fn(struct request_queue *q) if (!scsi_host_queue_ready(q, shost, sdev)) goto not_ready; - if (sdev->single_lun) { + if (scsi_target(sdev)->single_lun) { if (scsi_target(sdev)->starget_sdev_user && scsi_target(sdev)->starget_sdev_user != sdev) goto not_ready; diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 7e8b2045ccfa..ada72af0a6dd 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -865,7 +865,7 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, sdev->no_start_on_add = 1; if (*bflags & BLIST_SINGLELUN) - sdev->single_lun = 1; + scsi_target(sdev)->single_lun = 1; sdev->use_10_for_rw = 1; diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 6c2d80b36aa1..45bb12b54175 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -122,9 +122,6 @@ struct scsi_device { unsigned tagged_supported:1; /* Supports SCSI-II tagged queuing */ unsigned simple_tags:1; /* simple queue tag messages are enabled */ unsigned ordered_tags:1;/* ordered queue tag messages are enabled */ - unsigned single_lun:1; /* Indicates we should only allow I/O to - * one of the luns for the device at a - * time. */ unsigned was_reset:1; /* There was a bus reset on the bus for * this device */ unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN @@ -202,6 +199,9 @@ struct scsi_target { unsigned int id; /* target id ... replace * scsi_device.id eventually */ unsigned int create:1; /* signal that it needs to be added */ + unsigned int single_lun:1; /* Indicates we should only + * allow I/O to one of the luns + * for the device at a time. */ unsigned int pdt_1f_for_no_lun; /* PDT = 0x1f */ /* means no lun present */ -- cgit v1.2.3-59-g8ed1b From 6af6632a1c1cac169fe7fbedb2f642b4ebb38323 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 14 Nov 2007 16:52:25 -0800 Subject: [SCSI] boot options: correct option name and tell where to find docs for it Minor corrections and additions to 'scsi_logging_level', as pointed out by Chuck Ebbert. Also point out the IBM S390-tools 'scsi_logging_level' script. Signed-off-by: Randy Dunlap Signed-off-by: James Bottomley --- Documentation/kernel-parameters.txt | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index c4178778e7fd..99938b8b50e1 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1593,7 +1593,13 @@ and is between 256 and 4096 characters. It is defined in the file Format: :: (flags are integer value) - scsi_logging= [SCSI] + scsi_logging_level= [SCSI] a bit mask of logging levels + See drivers/scsi/scsi_logging.h for bits. Also + settable via sysctl at dev.scsi.logging_level + (/proc/sys/dev/scsi/logging_level). + There is also a nice 'scsi_logging_level' script in the + S390-tools package, available for download at + http://www-128.ibm.com/developerworks/linux/linux390/s390-tools-1.5.4.html scsi_mod.scan= [SCSI] sync (default) scans SCSI busses as they are discovered. async scans them in kernel threads, -- cgit v1.2.3-59-g8ed1b From c93ff979a40e99f7229544cc8298c820b8eda17e Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 15 Nov 2007 17:07:28 -0800 Subject: [SCSI] kernel-doc: use correct function name Use correct function name in kernel-doc. Signed-off-by: Randy Dunlap Signed-off-by: James Bottomley --- drivers/scsi/scsi_devinfo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c index 6839c1004b29..b8de041bc0ae 100644 --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -549,7 +549,7 @@ void scsi_exit_devinfo(void) } /** - * scsi_dev_list_init - set up the dynamic device list. + * scsi_init_devinfo - set up the dynamic device list. * * Description: * Add command line entries from scsi_dev_flags, then add -- cgit v1.2.3-59-g8ed1b From dc8875e1078961591af4fbf9556c44648bf28d11 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 15 Nov 2007 15:42:30 -0800 Subject: [SCSI] docbook and kernel-doc updates - Change title to remove "Mid-Layer" since the doc is about all of the SCSI layers. - Use "SCSI" instead of "scsi" in docbook text. - Use "*/" to end kernel-doc notation blocks. - A few other minor typo fixes. Signed-off-by: Randy Dunlap Signed-off-by: James Bottomley --- Documentation/DocBook/scsi.tmpl | 10 ++--- drivers/scsi/scsi.c | 2 +- drivers/scsi/scsi_error.c | 79 +++++++++++++++++++-------------------- drivers/scsi/scsi_transport_srp.c | 3 +- 4 files changed, 45 insertions(+), 49 deletions(-) diff --git a/Documentation/DocBook/scsi.tmpl b/Documentation/DocBook/scsi.tmpl index 6255930216b3..f299ab182bbe 100644 --- a/Documentation/DocBook/scsi.tmpl +++ b/Documentation/DocBook/scsi.tmpl @@ -4,7 +4,7 @@ - SCSI Mid Layer Guide + SCSI Interfaces Guide @@ -92,7 +92,7 @@ The SCSI subsystem uses a three layer design, with upper, mid, and low layers. Every operation involving the SCSI subsystem (such as reading a sector from a disk) uses one driver at each of the 3 levels: one - upper layer driver, one lower layer driver, and the scsi midlayer. + upper layer driver, one lower layer driver, and the SCSI midlayer. The SCSI upper layer provides the interface between userspace and the @@ -154,7 +154,7 @@ drivers/scsi/scsi.c - Main file for the scsi midlayer. + Main file for the SCSI midlayer. !Edrivers/scsi/scsi.c @@ -182,7 +182,7 @@ drivers/scsi/scsi_ioctl.c - Handle ioctl() calls for scsi devices. + Handle ioctl() calls for SCSI devices. !Edrivers/scsi/scsi_ioctl.c @@ -287,7 +287,7 @@ Transport classes - Transport classes are service libraries for drivers in the scsi + Transport classes are service libraries for drivers in the SCSI lower layer, which expose transport attributes in sysfs. diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 412a351c6cf7..ebc019380835 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -960,7 +960,7 @@ EXPORT_SYMBOL(__starget_for_each_device); * reference. You must hold the host's host_lock over this call and * any access to the returned scsi_device. * - * Note: The only reason why drivers would want to use this is because + * Note: The only reason why drivers should use this is because * they need to access the device list in irq context. Otherwise you * really want to use scsi_device_lookup_by_target instead. **/ diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 22f8140598ba..169bc595648a 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -62,7 +62,7 @@ void scsi_eh_wakeup(struct Scsi_Host *shost) * @shost: SCSI host to invoke error handling on. * * Schedule SCSI EH without scmd. - **/ + */ void scsi_schedule_eh(struct Scsi_Host *shost) { unsigned long flags; @@ -86,7 +86,7 @@ EXPORT_SYMBOL_GPL(scsi_schedule_eh); * * Return value: * 0 on failure. - **/ + */ int scsi_eh_scmd_add(struct scsi_cmnd *scmd, int eh_flag) { struct Scsi_Host *shost = scmd->device->host; @@ -121,7 +121,7 @@ int scsi_eh_scmd_add(struct scsi_cmnd *scmd, int eh_flag) * This should be turned into an inline function. Each scsi command * has its own timer, and as it is added to the queue, we set up the * timer. When the command completes, we cancel the timer. - **/ + */ void scsi_add_timer(struct scsi_cmnd *scmd, int timeout, void (*complete)(struct scsi_cmnd *)) { @@ -155,7 +155,7 @@ void scsi_add_timer(struct scsi_cmnd *scmd, int timeout, * Return value: * 1 if we were able to detach the timer. 0 if we blew it, and the * timer function has already started to run. - **/ + */ int scsi_delete_timer(struct scsi_cmnd *scmd) { int rtn; @@ -181,7 +181,7 @@ int scsi_delete_timer(struct scsi_cmnd *scmd) * only in that the normal completion handling might run, but if the * normal completion function determines that the timer has already * fired, then it mustn't do anything. - **/ + */ void scsi_times_out(struct scsi_cmnd *scmd) { enum scsi_eh_timer_return (* eh_timed_out)(struct scsi_cmnd *); @@ -224,7 +224,7 @@ void scsi_times_out(struct scsi_cmnd *scmd) * * Return value: * 0 when dev was taken offline by error recovery. 1 OK to proceed. - **/ + */ int scsi_block_when_processing_errors(struct scsi_device *sdev) { int online; @@ -245,7 +245,7 @@ EXPORT_SYMBOL(scsi_block_when_processing_errors); * scsi_eh_prt_fail_stats - Log info on failures. * @shost: scsi host being recovered. * @work_q: Queue of scsi cmds to process. - **/ + */ static inline void scsi_eh_prt_fail_stats(struct Scsi_Host *shost, struct list_head *work_q) { @@ -295,7 +295,7 @@ static inline void scsi_eh_prt_fail_stats(struct Scsi_Host *shost, * Notes: * When a deferred error is detected the current command has * not been executed and needs retrying. - **/ + */ static int scsi_check_sense(struct scsi_cmnd *scmd) { struct scsi_sense_hdr sshdr; @@ -398,7 +398,7 @@ static int scsi_check_sense(struct scsi_cmnd *scmd) * queued during error recovery. the main difference here is that we * don't allow for the possibility of retries here, and we are a lot * more restrictive about what we consider acceptable. - **/ + */ static int scsi_eh_completed_normally(struct scsi_cmnd *scmd) { /* @@ -452,7 +452,7 @@ static int scsi_eh_completed_normally(struct scsi_cmnd *scmd) /** * scsi_eh_done - Completion function for error handling. * @scmd: Cmd that is done. - **/ + */ static void scsi_eh_done(struct scsi_cmnd *scmd) { struct completion *eh_action; @@ -469,7 +469,7 @@ static void scsi_eh_done(struct scsi_cmnd *scmd) /** * scsi_try_host_reset - ask host adapter to reset itself * @scmd: SCSI cmd to send hsot reset. - **/ + */ static int scsi_try_host_reset(struct scsi_cmnd *scmd) { unsigned long flags; @@ -498,7 +498,7 @@ static int scsi_try_host_reset(struct scsi_cmnd *scmd) /** * scsi_try_bus_reset - ask host to perform a bus reset * @scmd: SCSI cmd to send bus reset. - **/ + */ static int scsi_try_bus_reset(struct scsi_cmnd *scmd) { unsigned long flags; @@ -533,7 +533,7 @@ static int scsi_try_bus_reset(struct scsi_cmnd *scmd) * unreliable for a given host, then the host itself needs to put a * timer on it, and set the host back to a consistent state prior to * returning. - **/ + */ static int scsi_try_bus_device_reset(struct scsi_cmnd *scmd) { int rtn; @@ -568,7 +568,7 @@ static int __scsi_try_to_abort_cmd(struct scsi_cmnd *scmd) * author of the low-level driver wishes this operation to be timed, * they can provide this facility themselves. helper functions in * scsi_error.c can be supplied to make this easier to do. - **/ + */ static int scsi_try_to_abort_cmd(struct scsi_cmnd *scmd) { /* @@ -601,7 +601,7 @@ static void scsi_abort_eh_cmnd(struct scsi_cmnd *scmd) * sent must be one that does not transfer any data. If @sense_bytes != 0 * @cmnd is ignored and this functions sets up a REQUEST_SENSE command * and cmnd buffers to read @sense_bytes into @scmd->sense_buffer. - **/ + */ void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses, unsigned char *cmnd, int cmnd_size, unsigned sense_bytes) { @@ -667,7 +667,7 @@ EXPORT_SYMBOL(scsi_eh_prep_cmnd); * @ses: saved information from a coresponding call to scsi_prep_eh_cmnd * * Undo any damage done by above scsi_prep_eh_cmnd(). - **/ + */ void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *ses) { /* @@ -697,7 +697,7 @@ EXPORT_SYMBOL(scsi_eh_restore_cmnd); * * Return value: * SUCCESS or FAILED or NEEDS_RETRY - **/ + */ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd, int cmnd_size, int timeout, unsigned sense_bytes) { @@ -765,7 +765,7 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd, * Some hosts automatically obtain this information, others require * that we obtain it on our own. This function will *not* return until * the command either times out, or it completes. - **/ + */ static int scsi_request_sense(struct scsi_cmnd *scmd) { return scsi_send_eh_cmnd(scmd, NULL, 0, SENSE_TIMEOUT, ~0); @@ -782,7 +782,7 @@ static int scsi_request_sense(struct scsi_cmnd *scmd) * and that would disturb what we are doing. Thus we really want to * keep a list of pending commands for final completion, and once we * are ready to leave error handling we handle completion for real. - **/ + */ void scsi_eh_finish_cmd(struct scsi_cmnd *scmd, struct list_head *done_q) { scmd->device->host->host_failed--; @@ -810,7 +810,7 @@ EXPORT_SYMBOL(scsi_eh_finish_cmd); * * XXX: Long term this code should go away, but that needs an audit of * all LLDDs first. - **/ + */ int scsi_eh_get_sense(struct list_head *work_q, struct list_head *done_q) { @@ -862,7 +862,7 @@ EXPORT_SYMBOL_GPL(scsi_eh_get_sense); * * Return value: * 0 - Device is ready. 1 - Device NOT ready. - **/ + */ static int scsi_eh_tur(struct scsi_cmnd *scmd) { static unsigned char tur_command[6] = {TEST_UNIT_READY, 0, 0, 0, 0, 0}; @@ -897,7 +897,7 @@ retry_tur: * command that has timed out. If the command simply failed, it makes * no sense to try and abort the command, since as far as the shost * adapter is concerned, it isn't running. - **/ + */ static int scsi_eh_abort_cmds(struct list_head *work_q, struct list_head *done_q) { @@ -935,7 +935,7 @@ static int scsi_eh_abort_cmds(struct list_head *work_q, * * Return value: * 0 - Device is ready. 1 - Device NOT ready. - **/ + */ static int scsi_eh_try_stu(struct scsi_cmnd *scmd) { static unsigned char stu_command[6] = {START_STOP, 0, 0, 0, 1, 0}; @@ -963,7 +963,7 @@ static int scsi_eh_try_stu(struct scsi_cmnd *scmd) * Notes: * If commands are failing due to not ready, initializing command required, * try revalidating the device, which will end up sending a start unit. - **/ + */ static int scsi_eh_stu(struct Scsi_Host *shost, struct list_head *work_q, struct list_head *done_q) @@ -1017,7 +1017,7 @@ static int scsi_eh_stu(struct Scsi_Host *shost, * devices that are jammed or not - if we have multiple devices, it * makes no sense to try bus_device_reset - we really would need to try * a bus_reset instead. - **/ + */ static int scsi_eh_bus_device_reset(struct Scsi_Host *shost, struct list_head *work_q, struct list_head *done_q) @@ -1068,7 +1068,7 @@ static int scsi_eh_bus_device_reset(struct Scsi_Host *shost, * @shost: &scsi host being recovered. * @work_q: &list_head for pending commands. * @done_q: &list_head for processed commands. - **/ + */ static int scsi_eh_bus_reset(struct Scsi_Host *shost, struct list_head *work_q, struct list_head *done_q) @@ -1125,7 +1125,7 @@ static int scsi_eh_bus_reset(struct Scsi_Host *shost, * scsi_eh_host_reset - send a host reset * @work_q: list_head for processed commands. * @done_q: list_head for processed commands. - **/ + */ static int scsi_eh_host_reset(struct list_head *work_q, struct list_head *done_q) { @@ -1160,8 +1160,7 @@ static int scsi_eh_host_reset(struct list_head *work_q, * scsi_eh_offline_sdevs - offline scsi devices that fail to recover * @work_q: list_head for processed commands. * @done_q: list_head for processed commands. - * - **/ + */ static void scsi_eh_offline_sdevs(struct list_head *work_q, struct list_head *done_q) { @@ -1194,7 +1193,7 @@ static void scsi_eh_offline_sdevs(struct list_head *work_q, * is woken. In cases where the error code indicates an error that * doesn't require the error handler read (i.e. we don't need to * abort/reset), this function should return SUCCESS. - **/ + */ int scsi_decide_disposition(struct scsi_cmnd *scmd) { int rtn; @@ -1375,7 +1374,7 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd) * * If scsi_allocate_request() fails for what ever reason, we * completely forget to lock the door. - **/ + */ static void scsi_eh_lock_door(struct scsi_device *sdev) { unsigned char cmnd[MAX_COMMAND_SIZE]; @@ -1399,7 +1398,7 @@ static void scsi_eh_lock_door(struct scsi_device *sdev) * Notes: * When we entered the error handler, we blocked all further i/o to * this device. we need to 'reverse' this process. - **/ + */ static void scsi_restart_operations(struct Scsi_Host *shost) { struct scsi_device *sdev; @@ -1445,8 +1444,7 @@ static void scsi_restart_operations(struct Scsi_Host *shost) * @shost: host to be recovered. * @work_q: &list_head for pending commands. * @done_q: &list_head for processed commands. - * - **/ + */ void scsi_eh_ready_devs(struct Scsi_Host *shost, struct list_head *work_q, struct list_head *done_q) @@ -1462,8 +1460,7 @@ EXPORT_SYMBOL_GPL(scsi_eh_ready_devs); /** * scsi_eh_flush_done_q - finish processed commands or retry them. * @done_q: list_head of processed commands. - * - **/ + */ void scsi_eh_flush_done_q(struct list_head *done_q) { struct scsi_cmnd *scmd, *next; @@ -1517,7 +1514,7 @@ EXPORT_SYMBOL(scsi_eh_flush_done_q); * scsi_finish_cmd() called for it. we do all of the retry stuff * here, so when we restart the host after we return it should have an * empty queue. - **/ + */ static void scsi_unjam_host(struct Scsi_Host *shost) { unsigned long flags; @@ -1544,7 +1541,7 @@ static void scsi_unjam_host(struct Scsi_Host *shost) * Notes: * This is the main error handling loop. This is run as a kernel thread * for every SCSI host and handles all error handling activity. - **/ + */ int scsi_error_handler(void *data) { struct Scsi_Host *shost = data; @@ -1773,7 +1770,7 @@ EXPORT_SYMBOL(scsi_reset_provider); * * Return value: * 1 if valid sense data information found, else 0; - **/ + */ int scsi_normalize_sense(const u8 *sense_buffer, int sb_len, struct scsi_sense_hdr *sshdr) { @@ -1839,7 +1836,7 @@ EXPORT_SYMBOL(scsi_command_normalize_sense); * * Return value: * pointer to start of (first) descriptor if found else NULL - **/ + */ const u8 * scsi_sense_desc_find(const u8 * sense_buffer, int sb_len, int desc_type) { @@ -1875,7 +1872,7 @@ EXPORT_SYMBOL(scsi_sense_desc_find); * * Return value: * 1 if information field found, 0 if not found. - **/ + */ int scsi_get_sense_info_fld(const u8 * sense_buffer, int sb_len, u64 * info_out) { diff --git a/drivers/scsi/scsi_transport_srp.c b/drivers/scsi/scsi_transport_srp.c index 739e327bba09..2445c98ae95e 100644 --- a/drivers/scsi/scsi_transport_srp.c +++ b/drivers/scsi/scsi_transport_srp.c @@ -185,11 +185,10 @@ static int srp_host_match(struct attribute_container *cont, struct device *dev) /** * srp_rport_add - add a SRP remote port to the device hierarchy - * * @shost: scsi host the remote port is connected to. * @ids: The port id for the remote port. * - * publishes a port to the rest of the system + * Publishes a port to the rest of the system. */ struct srp_rport *srp_rport_add(struct Scsi_Host *shost, struct srp_rport_identifiers *ids) -- cgit v1.2.3-59-g8ed1b From 860784c8a2b077157b6a51fb8749524d0363cc49 Mon Sep 17 00:00:00 2001 From: Robert Jennings Date: Mon, 12 Nov 2007 09:00:23 -0600 Subject: [SCSI] ibmvscsi: requeue while CRQ closed CRQ send errors that return with H_CLOSED should return with SCSI_MLQUEUE_HOST_BUSY until firmware alerts the client of a CRQ transport event. The transport event will either reinitialize and requeue the requests or fail and return IO with DID_ERROR. To avoid failing the eh_* functions while re-attaching to the server adapter this will retry for a period of time while ibmvscsi_send_srp_event returns SCSI_MLQUEUE_HOST_BUSY. In ibmvscsi_eh_abort_handler() the loop includes the search of the event list. The lock on the hostdata is dropped while waiting to try again after failing ibmvscsi_send_srp_event. The event could have been purged if a login was in progress when the function was called. In ibmvscsi_eh_device_reset_handler() the loop includes the call to get_event_struct() because a failing call to ibmvscsi_send_srp_event() will have freed the event struct. Signed-off-by: Robert Jennings Signed-off-by: Brian King Signed-off-by: James Bottomley --- drivers/scsi/ibmvscsi/ibmvscsi.c | 151 +++++++++++++++++++++++++-------------- 1 file changed, 96 insertions(+), 55 deletions(-) diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c index 50120c8c164b..30819012898f 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.c +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c @@ -629,6 +629,16 @@ static int ibmvscsi_send_srp_event(struct srp_event_struct *evt_struct, list_del(&evt_struct->list); del_timer(&evt_struct->timer); + /* If send_crq returns H_CLOSED, return SCSI_MLQUEUE_HOST_BUSY. + * Firmware will send a CRQ with a transport event (0xFF) to + * tell this client what has happened to the transport. This + * will be handled in ibmvscsi_handle_crq() + */ + if (rc == H_CLOSED) { + dev_warn(hostdata->dev, "send warning. " + "Receive queue closed, will retry.\n"); + goto send_busy; + } dev_err(hostdata->dev, "send error %d\n", rc); atomic_inc(&hostdata->request_limit); goto send_error; @@ -976,58 +986,74 @@ static int ibmvscsi_eh_abort_handler(struct scsi_cmnd *cmd) int rsp_rc; unsigned long flags; u16 lun = lun_from_dev(cmd->device); + unsigned long wait_switch = 0; /* First, find this command in our sent list so we can figure * out the correct tag */ spin_lock_irqsave(hostdata->host->host_lock, flags); - found_evt = NULL; - list_for_each_entry(tmp_evt, &hostdata->sent, list) { - if (tmp_evt->cmnd == cmd) { - found_evt = tmp_evt; - break; + wait_switch = jiffies + (init_timeout * HZ); + do { + found_evt = NULL; + list_for_each_entry(tmp_evt, &hostdata->sent, list) { + if (tmp_evt->cmnd == cmd) { + found_evt = tmp_evt; + break; + } } - } - if (!found_evt) { - spin_unlock_irqrestore(hostdata->host->host_lock, flags); - return SUCCESS; - } + if (!found_evt) { + spin_unlock_irqrestore(hostdata->host->host_lock, flags); + return SUCCESS; + } - evt = get_event_struct(&hostdata->pool); - if (evt == NULL) { - spin_unlock_irqrestore(hostdata->host->host_lock, flags); - sdev_printk(KERN_ERR, cmd->device, "failed to allocate abort event\n"); - return FAILED; - } + evt = get_event_struct(&hostdata->pool); + if (evt == NULL) { + spin_unlock_irqrestore(hostdata->host->host_lock, flags); + sdev_printk(KERN_ERR, cmd->device, + "failed to allocate abort event\n"); + return FAILED; + } - init_event_struct(evt, - sync_completion, - VIOSRP_SRP_FORMAT, - init_timeout); + init_event_struct(evt, + sync_completion, + VIOSRP_SRP_FORMAT, + init_timeout); - tsk_mgmt = &evt->iu.srp.tsk_mgmt; + tsk_mgmt = &evt->iu.srp.tsk_mgmt; - /* Set up an abort SRP command */ - memset(tsk_mgmt, 0x00, sizeof(*tsk_mgmt)); - tsk_mgmt->opcode = SRP_TSK_MGMT; - tsk_mgmt->lun = ((u64) lun) << 48; - tsk_mgmt->tsk_mgmt_func = SRP_TSK_ABORT_TASK; - tsk_mgmt->task_tag = (u64) found_evt; - - sdev_printk(KERN_INFO, cmd->device, "aborting command. lun 0x%lx, tag 0x%lx\n", - tsk_mgmt->lun, tsk_mgmt->task_tag); - - evt->sync_srp = &srp_rsp; - init_completion(&evt->comp); - rsp_rc = ibmvscsi_send_srp_event(evt, hostdata, init_timeout * 2); + /* Set up an abort SRP command */ + memset(tsk_mgmt, 0x00, sizeof(*tsk_mgmt)); + tsk_mgmt->opcode = SRP_TSK_MGMT; + tsk_mgmt->lun = ((u64) lun) << 48; + tsk_mgmt->tsk_mgmt_func = SRP_TSK_ABORT_TASK; + tsk_mgmt->task_tag = (u64) found_evt; + + evt->sync_srp = &srp_rsp; + + init_completion(&evt->comp); + rsp_rc = ibmvscsi_send_srp_event(evt, hostdata, init_timeout * 2); + + if (rsp_rc != SCSI_MLQUEUE_HOST_BUSY) + break; + + spin_unlock_irqrestore(hostdata->host->host_lock, flags); + msleep(10); + spin_lock_irqsave(hostdata->host->host_lock, flags); + } while (time_before(jiffies, wait_switch)); + spin_unlock_irqrestore(hostdata->host->host_lock, flags); + if (rsp_rc != 0) { sdev_printk(KERN_ERR, cmd->device, "failed to send abort() event. rc=%d\n", rsp_rc); return FAILED; } + sdev_printk(KERN_INFO, cmd->device, + "aborting command. lun 0x%lx, tag 0x%lx\n", + (((u64) lun) << 48), (u64) found_evt); + wait_for_completion(&evt->comp); /* make sure we got a good response */ @@ -1099,41 +1125,56 @@ static int ibmvscsi_eh_device_reset_handler(struct scsi_cmnd *cmd) int rsp_rc; unsigned long flags; u16 lun = lun_from_dev(cmd->device); + unsigned long wait_switch = 0; spin_lock_irqsave(hostdata->host->host_lock, flags); - evt = get_event_struct(&hostdata->pool); - if (evt == NULL) { - spin_unlock_irqrestore(hostdata->host->host_lock, flags); - sdev_printk(KERN_ERR, cmd->device, "failed to allocate reset event\n"); - return FAILED; - } + wait_switch = jiffies + (init_timeout * HZ); + do { + evt = get_event_struct(&hostdata->pool); + if (evt == NULL) { + spin_unlock_irqrestore(hostdata->host->host_lock, flags); + sdev_printk(KERN_ERR, cmd->device, + "failed to allocate reset event\n"); + return FAILED; + } - init_event_struct(evt, - sync_completion, - VIOSRP_SRP_FORMAT, - init_timeout); + init_event_struct(evt, + sync_completion, + VIOSRP_SRP_FORMAT, + init_timeout); - tsk_mgmt = &evt->iu.srp.tsk_mgmt; + tsk_mgmt = &evt->iu.srp.tsk_mgmt; - /* Set up a lun reset SRP command */ - memset(tsk_mgmt, 0x00, sizeof(*tsk_mgmt)); - tsk_mgmt->opcode = SRP_TSK_MGMT; - tsk_mgmt->lun = ((u64) lun) << 48; - tsk_mgmt->tsk_mgmt_func = SRP_TSK_LUN_RESET; + /* Set up a lun reset SRP command */ + memset(tsk_mgmt, 0x00, sizeof(*tsk_mgmt)); + tsk_mgmt->opcode = SRP_TSK_MGMT; + tsk_mgmt->lun = ((u64) lun) << 48; + tsk_mgmt->tsk_mgmt_func = SRP_TSK_LUN_RESET; - sdev_printk(KERN_INFO, cmd->device, "resetting device. lun 0x%lx\n", - tsk_mgmt->lun); + evt->sync_srp = &srp_rsp; + + init_completion(&evt->comp); + rsp_rc = ibmvscsi_send_srp_event(evt, hostdata, init_timeout * 2); + + if (rsp_rc != SCSI_MLQUEUE_HOST_BUSY) + break; + + spin_unlock_irqrestore(hostdata->host->host_lock, flags); + msleep(10); + spin_lock_irqsave(hostdata->host->host_lock, flags); + } while (time_before(jiffies, wait_switch)); - evt->sync_srp = &srp_rsp; - init_completion(&evt->comp); - rsp_rc = ibmvscsi_send_srp_event(evt, hostdata, init_timeout * 2); spin_unlock_irqrestore(hostdata->host->host_lock, flags); + if (rsp_rc != 0) { sdev_printk(KERN_ERR, cmd->device, "failed to send reset event. rc=%d\n", rsp_rc); return FAILED; } + sdev_printk(KERN_INFO, cmd->device, "resetting device. lun 0x%lx\n", + (((u64) lun) << 48)); + wait_for_completion(&evt->comp); /* make sure we got a good response */ -- cgit v1.2.3-59-g8ed1b From 06e23b7470ca7974b0ca8150c5415b55b5ea2a99 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Mon, 12 Nov 2007 10:30:57 -0800 Subject: [SCSI] qla2xxx: Don't explicitly read mbx registers while processing a system-error. Callers of qla2x00_async_event() already populate the mb[] array upon invocation, doing so via the appropriate mailbox register accessors. The stale codes removed are leftover-bits kept during the FWI2 transition. Though relatively benign, the extra-reads are not valid for FWI2 boards (ISP24xx and above) and peek into the incorrect regions of registers. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_isr.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 1104bd2eed40..343af399c95c 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -347,10 +347,6 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) break; case MBA_SYSTEM_ERR: /* System Error */ - mb[1] = RD_MAILBOX_REG(ha, reg, 1); - mb[2] = RD_MAILBOX_REG(ha, reg, 2); - mb[3] = RD_MAILBOX_REG(ha, reg, 3); - qla_printk(KERN_INFO, ha, "ISP System Error - mbx1=%xh mbx2=%xh mbx3=%xh.\n", mb[1], mb[2], mb[3]); -- cgit v1.2.3-59-g8ed1b From eb66dc60be5a72bc940458a5adfd400e4d810d49 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Mon, 12 Nov 2007 10:30:58 -0800 Subject: [SCSI] qla2xxx: Correct NPIV support for recent ISPs. Firmware will export to software the maximum number of vports supported for any given firmware version and ISP type. Use this information rather than the current hardcoding of limitations within the driver. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_attr.c | 2 +- drivers/scsi/qla2xxx/qla_def.h | 10 +--------- drivers/scsi/qla2xxx/qla_fw.h | 16 ++++++++++------ drivers/scsi/qla2xxx/qla_init.c | 19 +++++++------------ drivers/scsi/qla2xxx/qla_mbx.c | 4 ++-- drivers/scsi/qla2xxx/qla_mid.c | 33 ++++++++++++--------------------- 6 files changed, 33 insertions(+), 51 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index fb388b8c07cf..745283fcbf2c 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1124,7 +1124,7 @@ qla24xx_vport_delete(struct fc_vport *fc_vport) down(&ha->vport_sem); ha->cur_vport_count--; - clear_bit(vha->vp_idx, (unsigned long *)ha->vp_idx_map); + clear_bit(vha->vp_idx, ha->vp_idx_map); up(&ha->vport_sem); kfree(vha->node_name); diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 04e8cbca4c0d..fe8f7828f592 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2116,14 +2116,6 @@ struct qla_msix_entry { #define WATCH_INTERVAL 1 /* number of seconds */ -/* NPIV */ -#define MAX_MULTI_ID_LOOP 126 -#define MAX_MULTI_ID_FABRIC 64 -#define MAX_NUM_VPORT_LOOP (MAX_MULTI_ID_LOOP - 1) -#define MAX_NUM_VPORT_FABRIC (MAX_MULTI_ID_FABRIC - 1) -#define MAX_NUM_VHBA_LOOP (MAX_MULTI_ID_LOOP - 1) -#define MAX_NUM_VHBA_FABRIC (MAX_MULTI_ID_FABRIC - 1) - /* * Linux Host Adapter structure */ @@ -2507,7 +2499,7 @@ typedef struct scsi_qla_host { struct list_head vp_list; /* list of VP */ struct fc_vport *fc_vport; /* holds fc_vport * for each vport */ - uint8_t vp_idx_map[16]; + unsigned long vp_idx_map[(MAX_MULTI_ID_FABRIC / 8) / sizeof(unsigned long)]; uint16_t num_vhosts; /* number of vports created */ uint16_t num_vsans; /* number of vsan created */ uint16_t vp_idx; /* vport ID */ diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h index 25364b1aaf12..69a5e31dd93a 100644 --- a/drivers/scsi/qla2xxx/qla_fw.h +++ b/drivers/scsi/qla2xxx/qla_fw.h @@ -954,7 +954,15 @@ struct device_reg_24xx { /* MID Support ***************************************************************/ -#define MAX_MID_VPS 125 +#define MIN_MULTI_ID_FABRIC 64 /* Must be power-of-2. */ +#define MAX_MULTI_ID_FABRIC 256 /* ... */ + +#define for_each_mapped_vp_idx(_ha, _idx) \ + for (_idx = find_next_bit((_ha)->vp_idx_map, \ + (_ha)->max_npiv_vports + 1, 1); \ + _idx <= (_ha)->max_npiv_vports; \ + _idx = find_next_bit((_ha)->vp_idx_map, \ + (_ha)->max_npiv_vports + 1, _idx + 1)) \ struct mid_conf_entry_24xx { uint16_t reserved_1; @@ -982,7 +990,7 @@ struct mid_init_cb_24xx { uint16_t count; uint16_t options; - struct mid_conf_entry_24xx entries[MAX_MID_VPS]; + struct mid_conf_entry_24xx entries[MAX_MULTI_ID_FABRIC]; }; @@ -1002,10 +1010,6 @@ struct mid_db_entry_24xx { uint8_t reserved_1; }; -struct mid_db_24xx { - struct mid_db_entry_24xx entries[MAX_MID_VPS]; -}; - /* * Virtual Fabric ID type definition. */ diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 191dafd89be0..03444d6e4d26 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -922,9 +922,9 @@ qla2x00_setup_chip(scsi_qla_host_t *ha) ha->flags.npiv_supported = 1; if ((!ha->max_npiv_vports) || ((ha->max_npiv_vports + 1) % - MAX_MULTI_ID_FABRIC)) + MIN_MULTI_ID_FABRIC)) ha->max_npiv_vports = - MAX_NUM_VPORT_FABRIC; + MIN_MULTI_ID_FABRIC - 1; } if (ql2xallocfwdump) @@ -1162,7 +1162,8 @@ qla2x00_init_rings(scsi_qla_host_t *ha) DEBUG(printk("scsi(%ld): Issue init firmware.\n", ha->host_no)); - mid_init_cb->count = ha->max_npiv_vports; + mid_init_cb->count = cpu_to_le16(ha->max_npiv_vports); + mid_init_cb->options = __constant_cpu_to_le16(BIT_1); rval = qla2x00_init_firmware(ha, ha->init_cb_size); if (rval) { @@ -2566,14 +2567,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *ha, struct list_head *new_fcports) /* Bypass virtual ports of the same host. */ if (pha->num_vhosts) { - vp_index = find_next_bit( - (unsigned long *)pha->vp_idx_map, - MAX_MULTI_ID_FABRIC + 1, 1); - - for (;vp_index <= MAX_MULTI_ID_FABRIC; - vp_index = find_next_bit( - (unsigned long *)pha->vp_idx_map, - MAX_MULTI_ID_FABRIC + 1, vp_index + 1)) { + for_each_mapped_vp_idx(pha, vp_index) { empty_vp_index = 1; found_vp = 0; list_for_each_entry(vha, &pha->vp_list, @@ -2592,7 +2586,8 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *ha, struct list_head *new_fcports) new_fcport->d_id.b24 == vha->d_id.b24) break; } - if (vp_index <= MAX_MULTI_ID_FABRIC) + + if (vp_index <= pha->max_npiv_vports) continue; } diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index ccd662a6f5dc..031f269149b1 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -905,7 +905,7 @@ qla2x00_get_adapter_id(scsi_qla_host_t *ha, uint16_t *id, uint8_t *al_pa, mcp->mb[0] = MBC_GET_ADAPTER_LOOP_ID; mcp->mb[9] = ha->vp_idx; - mcp->out_mb = MBX_0; + mcp->out_mb = MBX_9|MBX_0; mcp->in_mb = MBX_9|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0; mcp->tov = 30; mcp->flags = 0; @@ -2873,7 +2873,7 @@ qla24xx_control_vp(scsi_qla_host_t *vha, int cmd) DEBUG11(printk("%s(%ld): entered. Enabling index %d\n", __func__, ha->host_no, vp_index)); - if (vp_index == 0 || vp_index >= MAX_MULTI_ID_LOOP) + if (vp_index == 0 || vp_index >= ha->max_npiv_vports) return QLA_PARAMETER_ERROR; vce = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &vce_dma); diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index 821ee74aadc6..74096aaa693c 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -47,16 +47,15 @@ qla24xx_allocate_vp_id(scsi_qla_host_t *vha) /* Find an empty slot and assign an vp_id */ down(&ha->vport_sem); - vp_id = find_first_zero_bit((unsigned long *)ha->vp_idx_map, - MAX_MULTI_ID_FABRIC); - if (vp_id > MAX_MULTI_ID_FABRIC) { - DEBUG15(printk ("vp_id %d is bigger than MAX_MULTI_ID_FABRID\n", - vp_id)); + vp_id = find_first_zero_bit(ha->vp_idx_map, ha->max_npiv_vports + 1); + if (vp_id > ha->max_npiv_vports) { + DEBUG15(printk ("vp_id %d is bigger than max-supported %d.\n", + vp_id, ha->max_npiv_vports)); up(&ha->vport_sem); return vp_id; } - set_bit(vp_id, (unsigned long *)ha->vp_idx_map); + set_bit(vp_id, ha->vp_idx_map); ha->num_vhosts++; vha->vp_idx = vp_id; list_add_tail(&vha->vp_list, &ha->vp_list); @@ -73,7 +72,7 @@ qla24xx_deallocate_vp_id(scsi_qla_host_t *vha) down(&ha->vport_sem); vp_id = vha->vp_idx; ha->num_vhosts--; - clear_bit(vp_id, (unsigned long *)ha->vp_idx_map); + clear_bit(vp_id, ha->vp_idx_map); list_del(&vha->vp_list); up(&ha->vport_sem); } @@ -216,11 +215,7 @@ qla2x00_alert_all_vps(scsi_qla_host_t *ha, uint16_t *mb) if (ha->parent) return; - i = find_next_bit((unsigned long *)ha->vp_idx_map, - MAX_MULTI_ID_FABRIC + 1, 1); - for (;i <= MAX_MULTI_ID_FABRIC; - i = find_next_bit((unsigned long *)ha->vp_idx_map, - MAX_MULTI_ID_FABRIC + 1, i + 1)) { + for_each_mapped_vp_idx(ha, i) { vp_idx_matched = 0; list_for_each_entry(vha, &ha->vp_list, vp_list) { @@ -311,11 +306,7 @@ qla2x00_do_dpc_all_vps(scsi_qla_host_t *ha) clear_bit(VP_DPC_NEEDED, &ha->dpc_flags); - i = find_next_bit((unsigned long *)ha->vp_idx_map, - MAX_MULTI_ID_FABRIC + 1, 1); - for (;i <= MAX_MULTI_ID_FABRIC; - i = find_next_bit((unsigned long *)ha->vp_idx_map, - MAX_MULTI_ID_FABRIC + 1, i + 1)) { + for_each_mapped_vp_idx(ha, i) { vp_idx_matched = 0; list_for_each_entry(vha, &ha->vp_list, vp_list) { @@ -356,9 +347,9 @@ qla24xx_vport_create_req_sanity_check(struct fc_vport *fc_vport) /* Check up max-npiv-supports */ if (ha->num_vhosts > ha->max_npiv_vports) { - DEBUG15(printk("scsi(%ld): num_vhosts %d is bigger than " - "max_npv_vports %d.\n", ha->host_no, - (uint16_t) ha->num_vhosts, (int) ha->max_npiv_vports)); + DEBUG15(printk("scsi(%ld): num_vhosts %ud is bigger than " + "max_npv_vports %ud.\n", ha->host_no, + ha->num_vhosts, ha->max_npiv_vports)); return VPCERR_UNSUPPORTED; } return 0; @@ -450,7 +441,7 @@ qla24xx_create_vhost(struct fc_vport *fc_vport) num_hosts++; down(&ha->vport_sem); - set_bit(vha->vp_idx, (unsigned long *)ha->vp_idx_map); + set_bit(vha->vp_idx, ha->vp_idx_map); ha->cur_vport_count++; up(&ha->vport_sem); -- cgit v1.2.3-59-g8ed1b From f4a8dbc7f6ca8c0a7ec4f112320899b6b77d7e17 Mon Sep 17 00:00:00 2001 From: Shyam Sundar Date: Mon, 12 Nov 2007 10:30:59 -0800 Subject: [SCSI] qla2xxx: Properly handle Vport state-change-notifications. Drivers do SCRs for each Vport. When something changes in the fabric, firmware generates one interrupt for each RSCN. Based on the current implementation, in each case, we make recursive calls to handle RSCN for physical and each subsequent virtual ports. The fix is to also take into consideration the vp_idx, which is set by the firmware to indicate the vport the RSCN was meant for. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_isr.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 343af399c95c..798b7e87e2e1 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -575,12 +575,15 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) /* Check if the Vport has issued a SCR */ if (ha->parent && test_bit(VP_SCR_NEEDED, &ha->vp_flags)) break; + /* Only handle SCNs for our Vport index. */ + if (ha->flags.npiv_supported && ha->vp_idx != mb[3]) + break; DEBUG2(printk("scsi(%ld): Asynchronous RSCR UPDATE.\n", ha->host_no)); DEBUG(printk(KERN_INFO - "scsi(%ld): RSCN database changed -- %04x %04x.\n", - ha->host_no, mb[1], mb[2])); + "scsi(%ld): RSCN database changed -- %04x %04x %04x.\n", + ha->host_no, mb[1], mb[2], mb[3])); rscn_entry = (mb[1] << 16) | mb[2]; host_pid = (ha->d_id.b.domain << 16) | (ha->d_id.b.area << 8) | -- cgit v1.2.3-59-g8ed1b From 3fb8931645e23785ee406444a782ba03c31d0e71 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Mon, 12 Nov 2007 10:31:00 -0800 Subject: [SCSI] qla2xxx: Update version number to 8.02.00-k6. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index ae6f7a2fb19f..6e3dc40e9c9d 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.02.00-k5" +#define QLA2XXX_VERSION "8.02.00-k6" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 2 -- cgit v1.2.3-59-g8ed1b From f3307f7276067e2f8f29a20e3ebe52887e8f9f00 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 8 Nov 2007 17:27:47 +0000 Subject: [SCSI] aacraid: don't assign cpu_to_le32(int) to u8 On Wed, Nov 07, 2007 at 01:51:44PM -0500, Salyzyn, Mark wrote: > Christoph Hellwig [mailto:hch@infradead.org] sez: > > Did anyone run the driver through sparse to see if we have > > more issues like this? > > There are some warnings from sparse, none like this one. I will deal > with the warnings ... Actually there are a lot of endianess warnings, fortunately most of them harmless. The patch below fixes all of them up (including the ones in the patch I replied to), except for aac_init_adapter which is really odd and I don't know what to do. [jejb fixed up rejections and checkpatch issues] Signed-off-by: Christoph Hellwig Acked-by: Mark Salyzyn Signed-off-by: James Bottomley --- drivers/scsi/aacraid/aachba.c | 11 ++++++----- drivers/scsi/aacraid/commsup.c | 43 +++++++++++++++++++++--------------------- drivers/scsi/aacraid/dpcsup.c | 8 +++----- drivers/scsi/aacraid/linit.c | 10 +++++----- drivers/scsi/aacraid/rx.c | 2 +- 5 files changed, 37 insertions(+), 37 deletions(-) diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index ad8912cbe6e7..641c303d28ef 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -981,7 +981,7 @@ static int aac_read_block(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 aac_fib_init(fib); readcmd = (struct aac_read *) fib_data(fib); readcmd->command = cpu_to_le32(VM_CtBlockRead); - readcmd->cid = cpu_to_le16(scmd_id(cmd)); + readcmd->cid = cpu_to_le32(scmd_id(cmd)); readcmd->block = cpu_to_le32((u32)(lba&0xffffffff)); readcmd->count = cpu_to_le32(count * 512); @@ -1072,7 +1072,7 @@ static int aac_write_block(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u3 aac_fib_init(fib); writecmd = (struct aac_write *) fib_data(fib); writecmd->command = cpu_to_le32(VM_CtBlockWrite); - writecmd->cid = cpu_to_le16(scmd_id(cmd)); + writecmd->cid = cpu_to_le32(scmd_id(cmd)); writecmd->block = cpu_to_le32((u32)(lba&0xffffffff)); writecmd->count = cpu_to_le32(count * 512); writecmd->sg.count = cpu_to_le32(1); @@ -1305,9 +1305,10 @@ int aac_get_adapter_info(struct aac_dev* dev) (int)sizeof(dev->supplement_adapter_info.VpdInfo.Tsid), dev->supplement_adapter_info.VpdInfo.Tsid); } - if (!aac_check_reset || ((aac_check_reset != 1) && - (dev->supplement_adapter_info.SupportedOptions2 & - le32_to_cpu(AAC_OPTION_IGNORE_RESET)))) { + if (!aac_check_reset || + ((aac_check_reset != 1) && + (dev->supplement_adapter_info.SupportedOptions2 & + cpu_to_le32(AAC_OPTION_IGNORE_RESET)))) { printk(KERN_INFO "%s%d: Reset Adapter Ignored\n", dev->name, dev->id); } diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index cb9a92f894ab..310fd80b8c06 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -796,13 +796,13 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr) */ switch (le32_to_cpu(aifcmd->command)) { case AifCmdDriverNotify: - switch (le32_to_cpu(((u32 *)aifcmd->data)[0])) { + switch (le32_to_cpu(((__le32 *)aifcmd->data)[0])) { /* * Morph or Expand complete */ case AifDenMorphComplete: case AifDenVolumeExtendComplete: - container = le32_to_cpu(((u32 *)aifcmd->data)[1]); + container = le32_to_cpu(((__le32 *)aifcmd->data)[1]); if (container >= dev->maximum_num_containers) break; @@ -835,25 +835,25 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr) if (container >= dev->maximum_num_containers) break; if ((dev->fsa_dev[container].config_waiting_on == - le32_to_cpu(*(u32 *)aifcmd->data)) && + le32_to_cpu(*(__le32 *)aifcmd->data)) && time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT)) dev->fsa_dev[container].config_waiting_on = 0; } else for (container = 0; container < dev->maximum_num_containers; ++container) { if ((dev->fsa_dev[container].config_waiting_on == - le32_to_cpu(*(u32 *)aifcmd->data)) && + le32_to_cpu(*(__le32 *)aifcmd->data)) && time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT)) dev->fsa_dev[container].config_waiting_on = 0; } break; case AifCmdEventNotify: - switch (le32_to_cpu(((u32 *)aifcmd->data)[0])) { + switch (le32_to_cpu(((__le32 *)aifcmd->data)[0])) { /* * Add an Array. */ case AifEnAddContainer: - container = le32_to_cpu(((u32 *)aifcmd->data)[1]); + container = le32_to_cpu(((__le32 *)aifcmd->data)[1]); if (container >= dev->maximum_num_containers) break; dev->fsa_dev[container].config_needed = ADD; @@ -866,7 +866,7 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr) * Delete an Array. */ case AifEnDeleteContainer: - container = le32_to_cpu(((u32 *)aifcmd->data)[1]); + container = le32_to_cpu(((__le32 *)aifcmd->data)[1]); if (container >= dev->maximum_num_containers) break; dev->fsa_dev[container].config_needed = DELETE; @@ -880,7 +880,7 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr) * waiting on something else, setup to wait on a Config Change. */ case AifEnContainerChange: - container = le32_to_cpu(((u32 *)aifcmd->data)[1]); + container = le32_to_cpu(((__le32 *)aifcmd->data)[1]); if (container >= dev->maximum_num_containers) break; if (dev->fsa_dev[container].config_waiting_on && @@ -905,13 +905,13 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr) if (container >= dev->maximum_num_containers) break; if ((dev->fsa_dev[container].config_waiting_on == - le32_to_cpu(*(u32 *)aifcmd->data)) && + le32_to_cpu(*(__le32 *)aifcmd->data)) && time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT)) dev->fsa_dev[container].config_waiting_on = 0; } else for (container = 0; container < dev->maximum_num_containers; ++container) { if ((dev->fsa_dev[container].config_waiting_on == - le32_to_cpu(*(u32 *)aifcmd->data)) && + le32_to_cpu(*(__le32 *)aifcmd->data)) && time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT)) dev->fsa_dev[container].config_waiting_on = 0; } @@ -926,9 +926,9 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr) * wait for a container change. */ - if ((((u32 *)aifcmd->data)[1] == cpu_to_le32(AifJobCtrZero)) - && ((((u32 *)aifcmd->data)[6] == ((u32 *)aifcmd->data)[5]) - || (((u32 *)aifcmd->data)[4] == cpu_to_le32(AifJobStsSuccess)))) { + if (((__le32 *)aifcmd->data)[1] == cpu_to_le32(AifJobCtrZero) && + (((__le32 *)aifcmd->data)[6] == ((__le32 *)aifcmd->data)[5] || + ((__le32 *)aifcmd->data)[4] == cpu_to_le32(AifJobStsSuccess))) { for (container = 0; container < dev->maximum_num_containers; ++container) { @@ -943,9 +943,9 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr) jiffies; } } - if ((((u32 *)aifcmd->data)[1] == cpu_to_le32(AifJobCtrZero)) - && (((u32 *)aifcmd->data)[6] == 0) - && (((u32 *)aifcmd->data)[4] == cpu_to_le32(AifJobStsRunning))) { + if (((__le32 *)aifcmd->data)[1] == cpu_to_le32(AifJobCtrZero) && + ((__le32 *)aifcmd->data)[6] == 0 && + ((__le32 *)aifcmd->data)[4] == cpu_to_le32(AifJobStsRunning)) { for (container = 0; container < dev->maximum_num_containers; ++container) { @@ -1373,9 +1373,10 @@ int aac_check_health(struct aac_dev * aac) printk(KERN_ERR "%s: Host adapter BLINK LED 0x%x\n", aac->name, BlinkLED); - if (!aac_check_reset || ((aac_check_reset != 1) && - (aac->supplement_adapter_info.SupportedOptions2 & - le32_to_cpu(AAC_OPTION_IGNORE_RESET)))) + if (!aac_check_reset || + ((aac_check_reset != 1) && + (aac->supplement_adapter_info.SupportedOptions2 & + cpu_to_le32(AAC_OPTION_IGNORE_RESET)))) goto out; host = aac->scsi_host_ptr; if (aac->thread->pid != current->pid) @@ -1656,11 +1657,11 @@ int aac_command_thread(void *data) struct fib *fibptr; if ((fibptr = aac_fib_alloc(dev))) { - u32 * info; + __le32 *info; aac_fib_init(fibptr); - info = (u32 *) fib_data(fibptr); + info = (__le32 *) fib_data(fibptr); if (now.tv_usec > 500000) ++now.tv_sec; diff --git a/drivers/scsi/aacraid/dpcsup.c b/drivers/scsi/aacraid/dpcsup.c index e6032ffc66a6..4726ab666c52 100644 --- a/drivers/scsi/aacraid/dpcsup.c +++ b/drivers/scsi/aacraid/dpcsup.c @@ -229,11 +229,9 @@ unsigned int aac_command_normal(struct aac_queue *q) * all QE there are and wake up all the waiters before exiting. */ -unsigned int aac_intr_normal(struct aac_dev * dev, u32 Index) +unsigned int aac_intr_normal(struct aac_dev *dev, u32 index) { - u32 index = le32_to_cpu(Index); - - dprintk((KERN_INFO "aac_intr_normal(%p,%x)\n", dev, Index)); + dprintk((KERN_INFO "aac_intr_normal(%p,%x)\n", dev, index)); if ((index & 0x00000002L)) { struct hw_fib * hw_fib; struct fib * fib; @@ -301,7 +299,7 @@ unsigned int aac_intr_normal(struct aac_dev * dev, u32 Index) if (hwfib->header.Command == cpu_to_le16(NuFileSystem)) { - u32 *pstatus = (u32 *)hwfib->data; + __le32 *pstatus = (__le32 *)hwfib->data; if (*pstatus & cpu_to_le32(0xffff0000)) *pstatus = cpu_to_le32(ST_OK); } diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index b4c9ff1b0859..782fae83ab48 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -584,11 +584,11 @@ static int aac_eh_reset(struct scsi_cmnd* cmd) * support a register, instead of a commanded, reset. */ if ((aac->supplement_adapter_info.SupportedOptions2 & - le32_to_cpu(AAC_OPTION_MU_RESET)) && - aac_check_reset && - ((aac_check_reset != 1) || - (aac->supplement_adapter_info.SupportedOptions2 & - le32_to_cpu(AAC_OPTION_IGNORE_RESET)))) + cpu_to_le32(AAC_OPTION_MU_RESET)) && + aac_check_reset && + ((aac_check_reset != 1) || + (aac->supplement_adapter_info.SupportedOptions2 & + cpu_to_le32(AAC_OPTION_IGNORE_RESET)))) aac_reset_adapter(aac, 2); /* Bypass wait for command quiesce */ return SUCCESS; /* Cause an immediate retry of the command with a ten second delay after successful tur */ } diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c index 710a03e54ed0..9b831519a6fa 100644 --- a/drivers/scsi/aacraid/rx.c +++ b/drivers/scsi/aacraid/rx.c @@ -465,7 +465,7 @@ static int aac_rx_restart_adapter(struct aac_dev *dev, int bled) u32 var; if (!(dev->supplement_adapter_info.SupportedOptions2 & - le32_to_cpu(AAC_OPTION_MU_RESET)) || (bled >= 0) || (bled == -2)) { + cpu_to_le32(AAC_OPTION_MU_RESET)) || (bled >= 0) || (bled == -2)) { if (bled) printk(KERN_ERR "%s%d: adapter kernel panic'd %x.\n", dev->name, dev->id, bled); -- cgit v1.2.3-59-g8ed1b From a8aae4d3427a5cf7c92b50125e35ea6cb9ba7394 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 15 Nov 2007 11:53:25 +0200 Subject: [SCSI] tgt: fix build when dprintk is defined Fix scsi_tgt_lib build when dprintk is defined: Also fix accessors problem when dprintk is defined drivers/scsi/scsi_tgt_lib.c: In function 'scsi_tgt_cmd_destroy': drivers/scsi/scsi_tgt_lib.c:183: warning: format '%lu' expects type 'long unsigned int', but argument 6 has type 'unsigned int' drivers/scsi/scsi_tgt_lib.c: In function 'scsi_tgt_cmd_done': drivers/scsi/scsi_tgt_lib.c:330: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'unsigned int' drivers/scsi/scsi_tgt_lib.c: In function 'scsi_tgt_transfer_response': drivers/scsi/scsi_tgt_lib.c:345: warning: format '%lu' expects type 'long unsigned int', but argument 5 has type 'unsigned int' drivers/scsi/scsi_tgt_lib.c: In function 'scsi_tgt_init_cmd': drivers/scsi/scsi_tgt_lib.c:368: warning: format '%lu' expects type 'long unsigned int', but argument 6 has type 'unsigned int' drivers/scsi/scsi_tgt_lib.c: In function 'scsi_tgt_kspace_exec': drivers/scsi/scsi_tgt_lib.c:499: warning: format '%lu' expects type 'long unsigned int', but argument 9 has type 'unsigned int' drivers/scsi/scsi_tgt_lib.c: In function 'scsi_tgt_kspace_it_nexus_rsp': drivers/scsi/scsi_tgt_lib.c:620: error: 'mid' undeclared (first use in this function) drivers/scsi/scsi_tgt_lib.c:620: error: (Each undeclared identifier is reported only once drivers/scsi/scsi_tgt_lib.c:620: error: for each function it appears in.) make[2]: *** [drivers/scsi/scsi_tgt_lib.o] Error 1 [tomo: > - dprintk("%d %d %llx\n", host_no, result, (unsigned long long) mid); > + dprintk("%d %d\n", host_no, result); 'mid' is a typo. I wanted to do: dprintk("%d %d %llx\n", host_no, result, (unsigned long long)itn_id); The rest looks ok. Thanks, ] Signed-off-by: Randy Dunlap Signed-off-by: Boaz Harrosh Acked-by: FUJITA Tomonori Signed-off-by: James Bottomley --- drivers/scsi/scsi_tgt_lib.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/scsi_tgt_lib.c b/drivers/scsi/scsi_tgt_lib.c index deea3cd5bf49..241815e911e7 100644 --- a/drivers/scsi/scsi_tgt_lib.c +++ b/drivers/scsi/scsi_tgt_lib.c @@ -180,7 +180,7 @@ static void scsi_tgt_cmd_destroy(struct work_struct *work) container_of(work, struct scsi_tgt_cmd, work); struct scsi_cmnd *cmd = tcmd->rq->special; - dprintk("cmd %p %d %lu\n", cmd, cmd->sc_data_direction, + dprintk("cmd %p %d %u\n", cmd, cmd->sc_data_direction, rq_data_dir(cmd->request)); scsi_unmap_user_pages(tcmd); scsi_host_put_command(scsi_tgt_cmd_to_host(cmd), cmd); @@ -327,7 +327,7 @@ static void scsi_tgt_cmd_done(struct scsi_cmnd *cmd) { struct scsi_tgt_cmd *tcmd = cmd->request->end_io_data; - dprintk("cmd %p %lu\n", cmd, rq_data_dir(cmd->request)); + dprintk("cmd %p %u\n", cmd, rq_data_dir(cmd->request)); scsi_tgt_uspace_send_status(cmd, tcmd->itn_id, tcmd->tag); @@ -342,7 +342,7 @@ static int scsi_tgt_transfer_response(struct scsi_cmnd *cmd) struct Scsi_Host *shost = scsi_tgt_cmd_to_host(cmd); int err; - dprintk("cmd %p %lu\n", cmd, rq_data_dir(cmd->request)); + dprintk("cmd %p %u\n", cmd, rq_data_dir(cmd->request)); err = shost->hostt->transfer_response(cmd, scsi_tgt_cmd_done); switch (err) { @@ -497,8 +497,8 @@ int scsi_tgt_kspace_exec(int host_no, u64 itn_id, int result, u64 tag, } cmd = rq->special; - dprintk("cmd %p scb %x result %d len %d bufflen %u %lu %x\n", - cmd, cmd->cmnd[0], result, len, cmd->request_bufflen, + dprintk("cmd %p scb %x result %d len %d bufflen %u %u %x\n", + cmd, cmd->cmnd[0], result, len, scsi_bufflen(cmd), rq_data_dir(rq), cmd->cmnd[0]); if (result == TASK_ABORTED) { @@ -618,7 +618,7 @@ int scsi_tgt_kspace_it_nexus_rsp(int host_no, u64 itn_id, int result) struct Scsi_Host *shost; int err = -EINVAL; - dprintk("%d %d %llx\n", host_no, result, (unsigned long long) mid); + dprintk("%d %d%llx\n", host_no, result, (unsigned long long)itn_id); shost = scsi_host_lookup(host_no); if (IS_ERR(shost)) { -- cgit v1.2.3-59-g8ed1b From 4a03d90e35bc5273d27301fa669d4b2103196f94 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Mon, 19 Nov 2007 11:28:48 +1100 Subject: [SCSI] BUG_ON() impossible condition in sg list counting If blk_rq_map_sg wrote more than was allocated in the scatterlist, BUG_ON() is probably the right thing to do. [jejb: rejections fixed up] Signed-off-by: Rusty Russell Acked-by: Jens Axboe Signed-off-by: James Bottomley --- drivers/scsi/scsi_lib.c | 15 +++------------ drivers/scsi/scsi_tgt_lib.c | 11 +++-------- 2 files changed, 6 insertions(+), 20 deletions(-) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index b0c59ae63a2f..aa17e718666e 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1104,7 +1104,6 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) * * Returns: 0 on success * BLKPREP_DEFER if the failure is retryable - * BLKPREP_KILL if the failure is fatal */ static int scsi_init_io(struct scsi_cmnd *cmd) { @@ -1138,17 +1137,9 @@ static int scsi_init_io(struct scsi_cmnd *cmd) * each segment. */ count = blk_rq_map_sg(req->q, req, cmd->request_buffer); - if (likely(count <= cmd->use_sg)) { - cmd->use_sg = count; - return BLKPREP_OK; - } - - printk(KERN_ERR "Incorrect number of segments after building list\n"); - printk(KERN_ERR "counted %d, received %d\n", count, cmd->use_sg); - printk(KERN_ERR "req nr_sec %lu, cur_nr_sec %u\n", req->nr_sectors, - req->current_nr_sectors); - - return BLKPREP_KILL; + BUG_ON(count > cmd->use_sg); + cmd->use_sg = count; + return BLKPREP_OK; } static struct scsi_cmnd *scsi_get_cmd_from_req(struct scsi_device *sdev, diff --git a/drivers/scsi/scsi_tgt_lib.c b/drivers/scsi/scsi_tgt_lib.c index 241815e911e7..93ece8f4e5de 100644 --- a/drivers/scsi/scsi_tgt_lib.c +++ b/drivers/scsi/scsi_tgt_lib.c @@ -368,14 +368,9 @@ static int scsi_tgt_init_cmd(struct scsi_cmnd *cmd, gfp_t gfp_mask) dprintk("cmd %p cnt %d %lu\n", cmd, scsi_sg_count(cmd), rq_data_dir(rq)); count = blk_rq_map_sg(rq->q, rq, scsi_sglist(cmd)); - if (likely(count <= scsi_sg_count(cmd))) { - cmd->use_sg = count; - return 0; - } - - eprintk("cmd %p cnt %d\n", cmd, scsi_sg_count(cmd)); - scsi_free_sgtable(cmd); - return -EINVAL; + BUG_ON(count > cmd->use_sg); + cmd->use_sg = count; + return 0; } /* TODO: test this crap and replace bio_map_user with new interface maybe */ -- cgit v1.2.3-59-g8ed1b From 001aac257cf8adbe90cdcba6e07f8d12dfc8fa6b Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sun, 2 Dec 2007 19:10:40 +0200 Subject: [SCSI] sd,sr: add early detection of medium not present The current scsi_test_unit_ready() is updated to return sense code information (in struct scsi_sense_hdr). The sd and sr drivers are changed to interpret the sense code return asc 0x3a as no media and adjust the device status accordingly. Signed-off-by: James Bottomley --- drivers/scsi/scsi_ioctl.c | 2 +- drivers/scsi/scsi_lib.c | 46 ++++++++++++++++++++++++++++++++++++++-------- drivers/scsi/sd.c | 13 ++++++++++--- drivers/scsi/sr.c | 19 +++++++++++++------ include/scsi/scsi_device.h | 2 +- 5 files changed, 63 insertions(+), 19 deletions(-) diff --git a/drivers/scsi/scsi_ioctl.c b/drivers/scsi/scsi_ioctl.c index 83e144716901..28b19ef26309 100644 --- a/drivers/scsi/scsi_ioctl.c +++ b/drivers/scsi/scsi_ioctl.c @@ -244,7 +244,7 @@ int scsi_ioctl(struct scsi_device *sdev, int cmd, void __user *arg) return scsi_set_medium_removal(sdev, SCSI_REMOVAL_ALLOW); case SCSI_IOCTL_TEST_UNIT_READY: return scsi_test_unit_ready(sdev, IOCTL_NORMAL_TIMEOUT, - NORMAL_RETRIES); + NORMAL_RETRIES, NULL); case SCSI_IOCTL_START_UNIT: scsi_cmd[0] = START_STOP; scsi_cmd[1] = 0; diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index aa17e718666e..db52222885b7 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1973,27 +1973,57 @@ scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage, } EXPORT_SYMBOL(scsi_mode_sense); +/** + * scsi_test_unit_ready - test if unit is ready + * @sdev: scsi device to change the state of. + * @timeout: command timeout + * @retries: number of retries before failing + * @sshdr_external: Optional pointer to struct scsi_sense_hdr for + * returning sense. Make sure that this is cleared before passing + * in. + * + * Returns zero if unsuccessful or an error if TUR failed. For + * removable media, a return of NOT_READY or UNIT_ATTENTION is + * translated to success, with the ->changed flag updated. + **/ int -scsi_test_unit_ready(struct scsi_device *sdev, int timeout, int retries) +scsi_test_unit_ready(struct scsi_device *sdev, int timeout, int retries, + struct scsi_sense_hdr *sshdr_external) { char cmd[] = { TEST_UNIT_READY, 0, 0, 0, 0, 0, }; - struct scsi_sense_hdr sshdr; + struct scsi_sense_hdr *sshdr; int result; - - result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0, &sshdr, - timeout, retries); + + if (!sshdr_external) + sshdr = kzalloc(sizeof(*sshdr), GFP_KERNEL); + else + sshdr = sshdr_external; + + /* try to eat the UNIT_ATTENTION if there are enough retries */ + do { + result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0, sshdr, + timeout, retries); + } while ((driver_byte(result) & DRIVER_SENSE) && + sshdr && sshdr->sense_key == UNIT_ATTENTION && + --retries); + + if (!sshdr) + /* could not allocate sense buffer, so can't process it */ + return result; if ((driver_byte(result) & DRIVER_SENSE) && sdev->removable) { - if ((scsi_sense_valid(&sshdr)) && - ((sshdr.sense_key == UNIT_ATTENTION) || - (sshdr.sense_key == NOT_READY))) { + if ((scsi_sense_valid(sshdr)) && + ((sshdr->sense_key == UNIT_ATTENTION) || + (sshdr->sense_key == NOT_READY))) { sdev->changed = 1; result = 0; } } + if (!sshdr_external) + kfree(sshdr); return result; } EXPORT_SYMBOL(scsi_test_unit_ready); diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 18343a6acd8e..212f6bcfd457 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -736,6 +736,7 @@ static int sd_media_changed(struct gendisk *disk) { struct scsi_disk *sdkp = scsi_disk(disk); struct scsi_device *sdp = sdkp->device; + struct scsi_sense_hdr *sshdr = NULL; int retval; SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_media_changed\n")); @@ -766,8 +767,11 @@ static int sd_media_changed(struct gendisk *disk) */ retval = -ENODEV; - if (scsi_block_when_processing_errors(sdp)) - retval = scsi_test_unit_ready(sdp, SD_TIMEOUT, SD_MAX_RETRIES); + if (scsi_block_when_processing_errors(sdp)) { + sshdr = kzalloc(sizeof(*sshdr), GFP_KERNEL); + retval = scsi_test_unit_ready(sdp, SD_TIMEOUT, SD_MAX_RETRIES, + sshdr); + } /* * Unable to test, unit probably not ready. This usually @@ -775,7 +779,9 @@ static int sd_media_changed(struct gendisk *disk) * and we will figure it out later once the drive is * available again. */ - if (retval) { + if (retval || (scsi_sense_valid(sshdr) && + /* 0x3a is medium not present */ + sshdr->asc == 0x3a)) { set_media_not_present(sdkp); retval = 1; goto out; @@ -794,6 +800,7 @@ out: if (retval != sdkp->previous_state) sdev_evt_send_simple(sdp, SDEV_EVT_MEDIA_CHANGE, GFP_KERNEL); sdkp->previous_state = retval; + kfree(sshdr); return retval; } diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index 7702681d93f9..896be4ab285d 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -179,18 +179,24 @@ static int sr_media_change(struct cdrom_device_info *cdi, int slot) { struct scsi_cd *cd = cdi->handle; int retval; + struct scsi_sense_hdr *sshdr; if (CDSL_CURRENT != slot) { /* no changer support */ return -EINVAL; } - retval = scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES); - if (retval) { - /* Unable to test, unit probably not ready. This usually - * means there is no disc in the drive. Mark as changed, - * and we will figure it out later once the drive is - * available again. */ + sshdr = kzalloc(sizeof(*sshdr), GFP_KERNEL); + retval = scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES, + sshdr); + if (retval || (scsi_sense_valid(sshdr) && + /* 0x3a is medium not present */ + sshdr->asc == 0x3a)) { + /* Media not present or unable to test, unit probably not + * ready. This usually means there is no disc in the drive. + * Mark as changed, and we will figure it out later once + * the drive is available again. + */ cd->device->changed = 1; /* This will force a flush, if called from check_disk_change */ retval = 1; @@ -213,6 +219,7 @@ out: sdev_evt_send_simple(cd->device, SDEV_EVT_MEDIA_CHANGE, GFP_KERNEL); cd->previous_state = retval; + kfree(sshdr); return retval; } diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 45bb12b54175..e0c645ac5014 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -295,7 +295,7 @@ extern int scsi_mode_select(struct scsi_device *sdev, int pf, int sp, struct scsi_mode_data *data, struct scsi_sense_hdr *); extern int scsi_test_unit_ready(struct scsi_device *sdev, int timeout, - int retries); + int retries, struct scsi_sense_hdr *sshdr); extern int scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state); extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type, -- cgit v1.2.3-59-g8ed1b From a6ababd26aac6ef875df2055dcc147ccda2f8364 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 5 Nov 2007 18:07:33 +0100 Subject: [SCSI] lpfc: minor cleanups This patch contains the following minor cleanups: - make the following needlessly global functions static: - lpfc_els.c: lpfc_register_new_vport() - lpfc_els.c: lpfc_issue_els_fdisc() - lpfc_els.c: lpfc_issue_fabric_iocb() - lpfc_els.c: lpfc_fabric_abort_vport() - lpfc_hbadisc.c: lpfc_dev_loss_tmo_handler() - lpfc_hbadisc.c: lpfc_mbx_cmpl_clear_la() - lpfc_hbadisc.c: lpfc_disc_flush_list() - lpfc_hbadisc.c: __lpfc_find_node() - lpfc_init.c: lpfc_hb_timeout() - lpfc_init.c: lpfc_block_mgmt_io() - lpfc_sli.c: __lpfc_sli_release_iocbq() - lpfc_sli.c: lpfc_sli_next_hbq_slot() - lpfc_sli.c: lpfc_sli_hbqbuf_init_hbqs() - lpfc_sli.c: lpfc_sli_hbqbuf_find() - lpfc_sli.c: __lpfc_sli_issue_iocb() - #if 0 the following unused global functions: - lpfc_els.c: lpfc_fabric_abort_flogi() - lpfc_hbadisc.c: lpfc_find_node() - lpfc_hbadisc.c: lpfc_findnode_rpi() - remove the unused exports Signed-off-by: Adrian Bunk Acked-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_crtn.h | 19 ------------------- drivers/scsi/lpfc/lpfc_els.c | 18 ++++++++++++++---- drivers/scsi/lpfc/lpfc_hbadisc.c | 13 +++++++++---- drivers/scsi/lpfc/lpfc_init.c | 22 +++++++++++----------- drivers/scsi/lpfc/lpfc_sli.c | 8 ++++---- drivers/scsi/lpfc/lpfc_vport.c | 3 --- 6 files changed, 38 insertions(+), 45 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index 87bea176ac05..d09eb533a27d 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -48,7 +48,6 @@ int lpfc_linkdown(struct lpfc_hba *); void lpfc_port_link_failure(struct lpfc_vport *); void lpfc_mbx_cmpl_read_la(struct lpfc_hba *, LPFC_MBOXQ_t *); -void lpfc_mbx_cmpl_clear_la(struct lpfc_hba *, LPFC_MBOXQ_t *); void lpfc_mbx_cmpl_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *); void lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *, LPFC_MBOXQ_t *); void lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *); @@ -73,13 +72,11 @@ int lpfc_nlp_not_used(struct lpfc_nodelist *ndlp); struct lpfc_nodelist *lpfc_setup_disc_node(struct lpfc_vport *, uint32_t); void lpfc_disc_list_loopmap(struct lpfc_vport *); void lpfc_disc_start(struct lpfc_vport *); -void lpfc_disc_flush_list(struct lpfc_vport *); void lpfc_cleanup_discovery_resources(struct lpfc_vport *); void lpfc_cleanup(struct lpfc_vport *); void lpfc_disc_timeout(unsigned long); struct lpfc_nodelist *__lpfc_findnode_rpi(struct lpfc_vport *, uint16_t); -struct lpfc_nodelist *lpfc_findnode_rpi(struct lpfc_vport *, uint16_t); void lpfc_worker_wake_up(struct lpfc_hba *); int lpfc_workq_post_event(struct lpfc_hba *, void *, void *, uint32_t); @@ -87,8 +84,6 @@ int lpfc_do_work(void *); int lpfc_disc_state_machine(struct lpfc_vport *, struct lpfc_nodelist *, void *, uint32_t); -void lpfc_register_new_vport(struct lpfc_hba *, struct lpfc_vport *, - struct lpfc_nodelist *); void lpfc_do_scr_ns_plogi(struct lpfc_hba *, struct lpfc_vport *); int lpfc_check_sparm(struct lpfc_vport *, struct lpfc_nodelist *, struct serv_parm *, uint32_t); @@ -99,7 +94,6 @@ int lpfc_els_chk_latt(struct lpfc_vport *); int lpfc_els_abort_flogi(struct lpfc_hba *); int lpfc_initial_flogi(struct lpfc_vport *); int lpfc_initial_fdisc(struct lpfc_vport *); -int lpfc_issue_els_fdisc(struct lpfc_vport *, struct lpfc_nodelist *, uint8_t); int lpfc_issue_els_plogi(struct lpfc_vport *, uint32_t, uint8_t); int lpfc_issue_els_prli(struct lpfc_vport *, struct lpfc_nodelist *, uint8_t); int lpfc_issue_els_adisc(struct lpfc_vport *, struct lpfc_nodelist *, uint8_t); @@ -119,7 +113,6 @@ int lpfc_els_rsp_prli_acc(struct lpfc_vport *, struct lpfc_iocbq *, void lpfc_cancel_retry_delay_tmo(struct lpfc_vport *, struct lpfc_nodelist *); void lpfc_els_retry_delay(unsigned long); void lpfc_els_retry_delay_handler(struct lpfc_nodelist *); -void lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *); void lpfc_els_unsol_event(struct lpfc_hba *, struct lpfc_sli_ring *, struct lpfc_iocbq *); int lpfc_els_handle_rscn(struct lpfc_vport *); @@ -131,7 +124,6 @@ int lpfc_els_disc_adisc(struct lpfc_vport *); int lpfc_els_disc_plogi(struct lpfc_vport *); void lpfc_els_timeout(unsigned long); void lpfc_els_timeout_handler(struct lpfc_vport *); -void lpfc_hb_timeout(unsigned long); void lpfc_hb_timeout_handler(struct lpfc_hba *); void lpfc_ct_unsol_event(struct lpfc_hba *, struct lpfc_sli_ring *, @@ -149,7 +141,6 @@ void lpfc_hba_init(struct lpfc_hba *, uint32_t *); int lpfc_post_buffer(struct lpfc_hba *, struct lpfc_sli_ring *, int, int); void lpfc_decode_firmware_rev(struct lpfc_hba *, char *, int); int lpfc_online(struct lpfc_hba *); -void lpfc_block_mgmt_io(struct lpfc_hba *); void lpfc_unblock_mgmt_io(struct lpfc_hba *); void lpfc_offline_prep(struct lpfc_hba *); void lpfc_offline(struct lpfc_hba *); @@ -172,7 +163,6 @@ int lpfc_mbox_tmo_val(struct lpfc_hba *, int); void lpfc_config_hbq(struct lpfc_hba *, uint32_t, struct lpfc_hbq_init *, uint32_t , LPFC_MBOXQ_t *); -struct lpfc_hbq_entry * lpfc_sli_next_hbq_slot(struct lpfc_hba *, uint32_t); struct hbq_dmabuf *lpfc_els_hbq_alloc(struct lpfc_hba *); void lpfc_els_hbq_free(struct lpfc_hba *, struct hbq_dmabuf *); @@ -185,7 +175,6 @@ void lpfc_poll_start_timer(struct lpfc_hba * phba); void lpfc_sli_poll_fcp_ring(struct lpfc_hba * hba); struct lpfc_iocbq * lpfc_sli_get_iocbq(struct lpfc_hba *); void lpfc_sli_release_iocbq(struct lpfc_hba * phba, struct lpfc_iocbq * iocb); -void __lpfc_sli_release_iocbq(struct lpfc_hba * phba, struct lpfc_iocbq * iocb); uint16_t lpfc_sli_next_iotag(struct lpfc_hba * phba, struct lpfc_iocbq * iocb); void lpfc_reset_barrier(struct lpfc_hba * phba); @@ -217,10 +206,8 @@ struct lpfc_dmabuf * lpfc_sli_ring_taggedbuf_get(struct lpfc_hba *, struct lpfc_sli_ring *, uint32_t ); int lpfc_sli_hbq_count(void); -int lpfc_sli_hbqbuf_init_hbqs(struct lpfc_hba *, uint32_t); int lpfc_sli_hbqbuf_add_hbqs(struct lpfc_hba *, uint32_t); void lpfc_sli_hbqbuf_free_all(struct lpfc_hba *); -struct hbq_dmabuf *lpfc_sli_hbqbuf_find(struct lpfc_hba *, uint32_t); int lpfc_sli_hbq_size(void); int lpfc_sli_issue_abort_iotag(struct lpfc_hba *, struct lpfc_sli_ring *, struct lpfc_iocbq *); @@ -231,9 +218,6 @@ int lpfc_sli_abort_iocb(struct lpfc_vport *, struct lpfc_sli_ring *, uint16_t, void lpfc_mbox_timeout(unsigned long); void lpfc_mbox_timeout_handler(struct lpfc_hba *); -struct lpfc_nodelist *__lpfc_find_node(struct lpfc_vport *, node_filter, - void *); -struct lpfc_nodelist *lpfc_find_node(struct lpfc_vport *, node_filter, void *); struct lpfc_nodelist *lpfc_findnode_did(struct lpfc_vport *, uint32_t); struct lpfc_nodelist *lpfc_findnode_wwpn(struct lpfc_vport *, struct lpfc_name *); @@ -294,11 +278,8 @@ extern void lpfc_debugfs_slow_ring_trc(struct lpfc_hba *, char *, uint32_t, extern struct lpfc_hbq_init *lpfc_hbq_defs[]; /* Interface exported by fabric iocb scheduler */ -int lpfc_issue_fabric_iocb(struct lpfc_hba *, struct lpfc_iocbq *); -void lpfc_fabric_abort_vport(struct lpfc_vport *); void lpfc_fabric_abort_nport(struct lpfc_nodelist *); void lpfc_fabric_abort_hba(struct lpfc_hba *); -void lpfc_fabric_abort_flogi(struct lpfc_hba *); void lpfc_fabric_block_timeout(unsigned long); void lpfc_unblock_fabric_iocbs(struct lpfc_hba *); void lpfc_adjust_queue_depth(struct lpfc_hba *); diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 9315c3c2e6f6..bf332cba2fc0 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -42,6 +42,14 @@ static int lpfc_els_retry(struct lpfc_hba *, struct lpfc_iocbq *, struct lpfc_iocbq *); static void lpfc_cmpl_fabric_iocb(struct lpfc_hba *, struct lpfc_iocbq *, struct lpfc_iocbq *); +static void lpfc_fabric_abort_vport(struct lpfc_vport *vport); +static int lpfc_issue_els_fdisc(struct lpfc_vport *vport, + struct lpfc_nodelist *ndlp, uint8_t retry); +static int lpfc_issue_fabric_iocb(struct lpfc_hba *phba, + struct lpfc_iocbq *iocb); +static void lpfc_register_new_vport(struct lpfc_hba *phba, + struct lpfc_vport *vport, + struct lpfc_nodelist *ndlp); static int lpfc_max_els_tries = 3; @@ -4254,7 +4262,7 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) return; } -void +static void lpfc_register_new_vport(struct lpfc_hba *phba, struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) { @@ -4369,7 +4377,7 @@ out: lpfc_els_free_iocb(phba, cmdiocb); } -int +static int lpfc_issue_els_fdisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, uint8_t retry) { @@ -4642,7 +4650,7 @@ lpfc_cmpl_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } } -int +static int lpfc_issue_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *iocb) { unsigned long iflags; @@ -4686,7 +4694,7 @@ lpfc_issue_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *iocb) } -void lpfc_fabric_abort_vport(struct lpfc_vport *vport) +static void lpfc_fabric_abort_vport(struct lpfc_vport *vport) { LIST_HEAD(completions); struct lpfc_hba *phba = vport->phba; @@ -4766,6 +4774,7 @@ void lpfc_fabric_abort_hba(struct lpfc_hba *phba) } +#if 0 void lpfc_fabric_abort_flogi(struct lpfc_hba *phba) { LIST_HEAD(completions); @@ -4796,5 +4805,6 @@ void lpfc_fabric_abort_flogi(struct lpfc_hba *phba) (piocb->iocb_cmpl) (phba, piocb, piocb); } } +#endif /* 0 */ diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 371f41e886d6..74c3b7039c9e 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -57,6 +57,7 @@ static uint8_t lpfcAlpaArray[] = { }; static void lpfc_disc_timeout_handler(struct lpfc_vport *); +static void lpfc_disc_flush_list(struct lpfc_vport *vport); void lpfc_terminate_rport_io(struct fc_rport *rport) @@ -170,7 +171,7 @@ lpfc_dev_loss_tmo_callbk(struct fc_rport *rport) * This function is called from the worker thread when dev_loss_tmo * expire. */ -void +static void lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp) { struct lpfc_rport_data *rdata; @@ -752,7 +753,7 @@ lpfc_linkup(struct lpfc_hba *phba) * as the completion routine when the command is * handed off to the SLI layer. */ -void +static void lpfc_mbx_cmpl_clear_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) { struct lpfc_vport *vport = pmb->vport; @@ -2452,7 +2453,7 @@ lpfc_free_tx(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) } } -void +static void lpfc_disc_flush_list(struct lpfc_vport *vport) { struct lpfc_nodelist *ndlp, *next_ndlp; @@ -2783,7 +2784,7 @@ lpfc_filter_by_wwpn(struct lpfc_nodelist *ndlp, void *param) sizeof(ndlp->nlp_portname)) == 0; } -struct lpfc_nodelist * +static struct lpfc_nodelist * __lpfc_find_node(struct lpfc_vport *vport, node_filter filter, void *param) { struct lpfc_nodelist *ndlp; @@ -2795,6 +2796,7 @@ __lpfc_find_node(struct lpfc_vport *vport, node_filter filter, void *param) return NULL; } +#if 0 /* * Search node lists for a remote port matching filter criteria * Caller needs to hold host_lock before calling this routine. @@ -2810,6 +2812,7 @@ lpfc_find_node(struct lpfc_vport *vport, node_filter filter, void *param) spin_unlock_irq(shost->host_lock); return ndlp; } +#endif /* 0 */ /* * This routine looks up the ndlp lists for the given RPI. If rpi found it @@ -2821,6 +2824,7 @@ __lpfc_findnode_rpi(struct lpfc_vport *vport, uint16_t rpi) return __lpfc_find_node(vport, lpfc_filter_by_rpi, &rpi); } +#if 0 struct lpfc_nodelist * lpfc_findnode_rpi(struct lpfc_vport *vport, uint16_t rpi) { @@ -2832,6 +2836,7 @@ lpfc_findnode_rpi(struct lpfc_vport *vport, uint16_t rpi) spin_unlock_irq(shost->host_lock); return ndlp; } +#endif /* 0 */ /* * This routine looks up the ndlp lists for the given WWPN. If WWPN found it diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 0615af41c7b5..0143baf4ba3b 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -508,7 +508,7 @@ lpfc_hba_down_post(struct lpfc_hba *phba) } /* HBA heart beat timeout handler */ -void +static void lpfc_hb_timeout(unsigned long ptr) { struct lpfc_hba *phba; @@ -1429,6 +1429,16 @@ lpfc_stop_phba_timers(struct lpfc_hba *phba) return; } +static void +lpfc_block_mgmt_io(struct lpfc_hba * phba) +{ + unsigned long iflag; + + spin_lock_irqsave(&phba->hbalock, iflag); + phba->sli.sli_flag |= LPFC_BLOCK_MGMT_IO; + spin_unlock_irqrestore(&phba->hbalock, iflag); +} + int lpfc_online(struct lpfc_hba *phba) { @@ -1474,16 +1484,6 @@ lpfc_online(struct lpfc_hba *phba) return 0; } -void -lpfc_block_mgmt_io(struct lpfc_hba * phba) -{ - unsigned long iflag; - - spin_lock_irqsave(&phba->hbalock, iflag); - phba->sli.sli_flag |= LPFC_BLOCK_MGMT_IO; - spin_unlock_irqrestore(&phba->hbalock, iflag); -} - void lpfc_unblock_mgmt_io(struct lpfc_hba * phba) { diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 9bc85d5a02f7..dcc48988040c 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -106,7 +106,7 @@ lpfc_sli_get_iocbq(struct lpfc_hba *phba) return iocbq; } -void +static void __lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq) { size_t start_clean = offsetof(struct lpfc_iocbq, iocb); @@ -489,7 +489,7 @@ lpfc_sli_resume_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) return; } -struct lpfc_hbq_entry * +static struct lpfc_hbq_entry * lpfc_sli_next_hbq_slot(struct lpfc_hba *phba, uint32_t hbqno) { struct hbq_s *hbqp = &phba->hbqs[hbqno]; @@ -636,14 +636,14 @@ lpfc_sli_hbqbuf_add_hbqs(struct lpfc_hba *phba, uint32_t qno) lpfc_hbq_defs[qno]->add_count)); } -int +static int lpfc_sli_hbqbuf_init_hbqs(struct lpfc_hba *phba, uint32_t qno) { return(lpfc_sli_hbqbuf_fill_hbqs(phba, qno, lpfc_hbq_defs[qno]->init_count)); } -struct hbq_dmabuf * +static struct hbq_dmabuf * lpfc_sli_hbqbuf_find(struct lpfc_hba *phba, uint32_t tag) { struct lpfc_dmabuf *d_buf; diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c index 378c01200b02..07a28700cbe7 100644 --- a/drivers/scsi/lpfc/lpfc_vport.c +++ b/drivers/scsi/lpfc/lpfc_vport.c @@ -556,9 +556,6 @@ skip_logo: return VPORT_OK; } -EXPORT_SYMBOL(lpfc_vport_create); -EXPORT_SYMBOL(lpfc_vport_delete); - struct lpfc_vport ** lpfc_create_vport_work_array(struct lpfc_hba *phba) { -- cgit v1.2.3-59-g8ed1b From 864473bbbbcbe99e95a57ad496894768cd77a567 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 29 Oct 2007 11:20:40 -0700 Subject: [SCSI] sym2: fix section mismatch warning Fix section mismatch warning: WARNING: vmlinux.o(.text+0x1ff3a2): Section mismatch: reference to .exit.text:sym2_remove (between 'sym2_io_error_detected' and 'sym_xpt_done') Signed-off-by: Randy Dunlap Signed-off-by: James Bottomley --- drivers/scsi/sym53c8xx_2/sym_glue.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index 9e0908d1981a..09bbb39efe88 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -1744,7 +1744,7 @@ static int __devinit sym2_probe(struct pci_dev *pdev, return -ENODEV; } -static void __devexit sym2_remove(struct pci_dev *pdev) +static void sym2_remove(struct pci_dev *pdev) { struct Scsi_Host *shost = pci_get_drvdata(pdev); @@ -2056,7 +2056,7 @@ static struct pci_driver sym2_driver = { .name = NAME53C8XX, .id_table = sym2_id_table, .probe = sym2_probe, - .remove = __devexit_p(sym2_remove), + .remove = sym2_remove, .err_handler = &sym2_err_handler, }; -- cgit v1.2.3-59-g8ed1b From 8a694cc87a1f9640aac9a9a278a8673e35a5e507 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 13 Dec 2007 16:14:07 -0800 Subject: [SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik Acked-by: "Salyzyn, Mark" Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- drivers/scsi/ips.c | 178 +++++++++++++++++++++++++---------------------------- drivers/scsi/ips.h | 20 +++--- 2 files changed, 91 insertions(+), 107 deletions(-) diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c index 5c5a9b2628fc..595a91afca0e 100644 --- a/drivers/scsi/ips.c +++ b/drivers/scsi/ips.c @@ -707,7 +707,7 @@ ips_release(struct Scsi_Host *sh) release_region(ha->io_addr, ha->io_len); /* free IRQ */ - free_irq(ha->irq, ha); + free_irq(ha->pcidev->irq, ha); scsi_host_put(sh); @@ -1637,7 +1637,7 @@ ips_make_passthru(ips_ha_t *ha, struct scsi_cmnd *SC, ips_scb_t *scb, int intr) return (IPS_FAILURE); } - if (ha->device_id == IPS_DEVICEID_COPPERHEAD && + if (ha->pcidev->device == IPS_DEVICEID_COPPERHEAD && pt->CoppCP.cmd.flashfw.op_code == IPS_CMD_RW_BIOSFW) { ret = ips_flash_copperhead(ha, pt, scb); @@ -2021,7 +2021,7 @@ ips_cleanup_passthru(ips_ha_t * ha, ips_scb_t * scb) pt->ExtendedStatus = scb->extended_status; pt->AdapterType = ha->ad_type; - if (ha->device_id == IPS_DEVICEID_COPPERHEAD && + if (ha->pcidev->device == IPS_DEVICEID_COPPERHEAD && (scb->cmd.flashfw.op_code == IPS_CMD_DOWNLOAD || scb->cmd.flashfw.op_code == IPS_CMD_RW_BIOSFW)) ips_free_flash_copperhead(ha); @@ -2075,7 +2075,7 @@ ips_host_info(ips_ha_t * ha, char *ptr, off_t offset, int len) ha->mem_ptr); } - copy_info(&info, "\tIRQ number : %d\n", ha->irq); + copy_info(&info, "\tIRQ number : %d\n", ha->pcidev->irq); /* For the Next 3 lines Check for Binary 0 at the end and don't include it if it's there. */ /* That keeps everything happy for "text" operations on the proc file. */ @@ -2232,31 +2232,31 @@ ips_identify_controller(ips_ha_t * ha) { METHOD_TRACE("ips_identify_controller", 1); - switch (ha->device_id) { + switch (ha->pcidev->device) { case IPS_DEVICEID_COPPERHEAD: - if (ha->revision_id <= IPS_REVID_SERVERAID) { + if (ha->pcidev->revision <= IPS_REVID_SERVERAID) { ha->ad_type = IPS_ADTYPE_SERVERAID; - } else if (ha->revision_id == IPS_REVID_SERVERAID2) { + } else if (ha->pcidev->revision == IPS_REVID_SERVERAID2) { ha->ad_type = IPS_ADTYPE_SERVERAID2; - } else if (ha->revision_id == IPS_REVID_NAVAJO) { + } else if (ha->pcidev->revision == IPS_REVID_NAVAJO) { ha->ad_type = IPS_ADTYPE_NAVAJO; - } else if ((ha->revision_id == IPS_REVID_SERVERAID2) + } else if ((ha->pcidev->revision == IPS_REVID_SERVERAID2) && (ha->slot_num == 0)) { ha->ad_type = IPS_ADTYPE_KIOWA; - } else if ((ha->revision_id >= IPS_REVID_CLARINETP1) && - (ha->revision_id <= IPS_REVID_CLARINETP3)) { + } else if ((ha->pcidev->revision >= IPS_REVID_CLARINETP1) && + (ha->pcidev->revision <= IPS_REVID_CLARINETP3)) { if (ha->enq->ucMaxPhysicalDevices == 15) ha->ad_type = IPS_ADTYPE_SERVERAID3L; else ha->ad_type = IPS_ADTYPE_SERVERAID3; - } else if ((ha->revision_id >= IPS_REVID_TROMBONE32) && - (ha->revision_id <= IPS_REVID_TROMBONE64)) { + } else if ((ha->pcidev->revision >= IPS_REVID_TROMBONE32) && + (ha->pcidev->revision <= IPS_REVID_TROMBONE64)) { ha->ad_type = IPS_ADTYPE_SERVERAID4H; } break; case IPS_DEVICEID_MORPHEUS: - switch (ha->subdevice_id) { + switch (ha->pcidev->subsystem_device) { case IPS_SUBDEVICEID_4L: ha->ad_type = IPS_ADTYPE_SERVERAID4L; break; @@ -2285,7 +2285,7 @@ ips_identify_controller(ips_ha_t * ha) break; case IPS_DEVICEID_MARCO: - switch (ha->subdevice_id) { + switch (ha->pcidev->subsystem_device) { case IPS_SUBDEVICEID_6M: ha->ad_type = IPS_ADTYPE_SERVERAID6M; break; @@ -2332,20 +2332,20 @@ ips_get_bios_version(ips_ha_t * ha, int intr) strncpy(ha->bios_version, " ?", 8); - if (ha->device_id == IPS_DEVICEID_COPPERHEAD) { + if (ha->pcidev->device == IPS_DEVICEID_COPPERHEAD) { if (IPS_USE_MEMIO(ha)) { /* Memory Mapped I/O */ /* test 1st byte */ writel(0, ha->mem_ptr + IPS_REG_FLAP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ if (readb(ha->mem_ptr + IPS_REG_FLDP) != 0x55) return; writel(1, ha->mem_ptr + IPS_REG_FLAP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ if (readb(ha->mem_ptr + IPS_REG_FLDP) != 0xAA) @@ -2353,20 +2353,20 @@ ips_get_bios_version(ips_ha_t * ha, int intr) /* Get Major version */ writel(0x1FF, ha->mem_ptr + IPS_REG_FLAP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ major = readb(ha->mem_ptr + IPS_REG_FLDP); /* Get Minor version */ writel(0x1FE, ha->mem_ptr + IPS_REG_FLAP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ minor = readb(ha->mem_ptr + IPS_REG_FLDP); /* Get SubMinor version */ writel(0x1FD, ha->mem_ptr + IPS_REG_FLAP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ subminor = readb(ha->mem_ptr + IPS_REG_FLDP); @@ -2375,14 +2375,14 @@ ips_get_bios_version(ips_ha_t * ha, int intr) /* test 1st byte */ outl(0, ha->io_addr + IPS_REG_FLAP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ if (inb(ha->io_addr + IPS_REG_FLDP) != 0x55) return; outl(cpu_to_le32(1), ha->io_addr + IPS_REG_FLAP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ if (inb(ha->io_addr + IPS_REG_FLDP) != 0xAA) @@ -2390,21 +2390,21 @@ ips_get_bios_version(ips_ha_t * ha, int intr) /* Get Major version */ outl(cpu_to_le32(0x1FF), ha->io_addr + IPS_REG_FLAP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ major = inb(ha->io_addr + IPS_REG_FLDP); /* Get Minor version */ outl(cpu_to_le32(0x1FE), ha->io_addr + IPS_REG_FLAP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ minor = inb(ha->io_addr + IPS_REG_FLDP); /* Get SubMinor version */ outl(cpu_to_le32(0x1FD), ha->io_addr + IPS_REG_FLAP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ subminor = inb(ha->io_addr + IPS_REG_FLDP); @@ -4903,7 +4903,7 @@ ips_init_copperhead(ips_ha_t * ha) /* Enable busmastering */ outb(IPS_BIT_EBM, ha->io_addr + IPS_REG_SCPR); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) /* fix for anaconda64 */ outl(0, ha->io_addr + IPS_REG_NDAE); @@ -4997,7 +4997,7 @@ ips_init_copperhead_memio(ips_ha_t * ha) /* Enable busmastering */ writeb(IPS_BIT_EBM, ha->mem_ptr + IPS_REG_SCPR); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) /* fix for anaconda64 */ writel(0, ha->mem_ptr + IPS_REG_NDAE); @@ -5142,7 +5142,7 @@ ips_reset_copperhead(ips_ha_t * ha) METHOD_TRACE("ips_reset_copperhead", 1); DEBUG_VAR(1, "(%s%d) ips_reset_copperhead: io addr: %x, irq: %d", - ips_name, ha->host_num, ha->io_addr, ha->irq); + ips_name, ha->host_num, ha->io_addr, ha->pcidev->irq); reset_counter = 0; @@ -5187,7 +5187,7 @@ ips_reset_copperhead_memio(ips_ha_t * ha) METHOD_TRACE("ips_reset_copperhead_memio", 1); DEBUG_VAR(1, "(%s%d) ips_reset_copperhead_memio: mem addr: %x, irq: %d", - ips_name, ha->host_num, ha->mem_addr, ha->irq); + ips_name, ha->host_num, ha->mem_addr, ha->pcidev->irq); reset_counter = 0; @@ -5233,7 +5233,7 @@ ips_reset_morpheus(ips_ha_t * ha) METHOD_TRACE("ips_reset_morpheus", 1); DEBUG_VAR(1, "(%s%d) ips_reset_morpheus: mem addr: %x, irq: %d", - ips_name, ha->host_num, ha->mem_addr, ha->irq); + ips_name, ha->host_num, ha->mem_addr, ha->pcidev->irq); reset_counter = 0; @@ -6196,32 +6196,32 @@ ips_erase_bios(ips_ha_t * ha) /* Clear the status register */ outl(0, ha->io_addr + IPS_REG_FLAP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ outb(0x50, ha->io_addr + IPS_REG_FLDP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ /* Erase Setup */ outb(0x20, ha->io_addr + IPS_REG_FLDP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ /* Erase Confirm */ outb(0xD0, ha->io_addr + IPS_REG_FLDP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ /* Erase Status */ outb(0x70, ha->io_addr + IPS_REG_FLDP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ timeout = 80000; /* 80 seconds */ while (timeout > 0) { - if (ha->revision_id == IPS_REVID_TROMBONE64) { + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) { outl(0, ha->io_addr + IPS_REG_FLAP); udelay(25); /* 25 us */ } @@ -6241,13 +6241,13 @@ ips_erase_bios(ips_ha_t * ha) /* try to suspend the erase */ outb(0xB0, ha->io_addr + IPS_REG_FLDP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ /* wait for 10 seconds */ timeout = 10000; while (timeout > 0) { - if (ha->revision_id == IPS_REVID_TROMBONE64) { + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) { outl(0, ha->io_addr + IPS_REG_FLAP); udelay(25); /* 25 us */ } @@ -6277,12 +6277,12 @@ ips_erase_bios(ips_ha_t * ha) /* Otherwise, we were successful */ /* clear status */ outb(0x50, ha->io_addr + IPS_REG_FLDP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ /* enable reads */ outb(0xFF, ha->io_addr + IPS_REG_FLDP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ return (0); @@ -6308,32 +6308,32 @@ ips_erase_bios_memio(ips_ha_t * ha) /* Clear the status register */ writel(0, ha->mem_ptr + IPS_REG_FLAP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ writeb(0x50, ha->mem_ptr + IPS_REG_FLDP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ /* Erase Setup */ writeb(0x20, ha->mem_ptr + IPS_REG_FLDP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ /* Erase Confirm */ writeb(0xD0, ha->mem_ptr + IPS_REG_FLDP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ /* Erase Status */ writeb(0x70, ha->mem_ptr + IPS_REG_FLDP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ timeout = 80000; /* 80 seconds */ while (timeout > 0) { - if (ha->revision_id == IPS_REVID_TROMBONE64) { + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) { writel(0, ha->mem_ptr + IPS_REG_FLAP); udelay(25); /* 25 us */ } @@ -6353,13 +6353,13 @@ ips_erase_bios_memio(ips_ha_t * ha) /* try to suspend the erase */ writeb(0xB0, ha->mem_ptr + IPS_REG_FLDP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ /* wait for 10 seconds */ timeout = 10000; while (timeout > 0) { - if (ha->revision_id == IPS_REVID_TROMBONE64) { + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) { writel(0, ha->mem_ptr + IPS_REG_FLAP); udelay(25); /* 25 us */ } @@ -6389,12 +6389,12 @@ ips_erase_bios_memio(ips_ha_t * ha) /* Otherwise, we were successful */ /* clear status */ writeb(0x50, ha->mem_ptr + IPS_REG_FLDP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ /* enable reads */ writeb(0xFF, ha->mem_ptr + IPS_REG_FLDP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ return (0); @@ -6423,21 +6423,21 @@ ips_program_bios(ips_ha_t * ha, char *buffer, uint32_t buffersize, for (i = 0; i < buffersize; i++) { /* write a byte */ outl(cpu_to_le32(i + offset), ha->io_addr + IPS_REG_FLAP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ outb(0x40, ha->io_addr + IPS_REG_FLDP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ outb(buffer[i], ha->io_addr + IPS_REG_FLDP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ /* wait up to one second */ timeout = 1000; while (timeout > 0) { - if (ha->revision_id == IPS_REVID_TROMBONE64) { + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) { outl(0, ha->io_addr + IPS_REG_FLAP); udelay(25); /* 25 us */ } @@ -6454,11 +6454,11 @@ ips_program_bios(ips_ha_t * ha, char *buffer, uint32_t buffersize, if (timeout == 0) { /* timeout error */ outl(0, ha->io_addr + IPS_REG_FLAP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ outb(0xFF, ha->io_addr + IPS_REG_FLDP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ return (1); @@ -6468,11 +6468,11 @@ ips_program_bios(ips_ha_t * ha, char *buffer, uint32_t buffersize, if (status & 0x18) { /* programming error */ outl(0, ha->io_addr + IPS_REG_FLAP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ outb(0xFF, ha->io_addr + IPS_REG_FLDP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ return (1); @@ -6481,11 +6481,11 @@ ips_program_bios(ips_ha_t * ha, char *buffer, uint32_t buffersize, /* Enable reading */ outl(0, ha->io_addr + IPS_REG_FLAP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ outb(0xFF, ha->io_addr + IPS_REG_FLDP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ return (0); @@ -6514,21 +6514,21 @@ ips_program_bios_memio(ips_ha_t * ha, char *buffer, uint32_t buffersize, for (i = 0; i < buffersize; i++) { /* write a byte */ writel(i + offset, ha->mem_ptr + IPS_REG_FLAP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ writeb(0x40, ha->mem_ptr + IPS_REG_FLDP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ writeb(buffer[i], ha->mem_ptr + IPS_REG_FLDP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ /* wait up to one second */ timeout = 1000; while (timeout > 0) { - if (ha->revision_id == IPS_REVID_TROMBONE64) { + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) { writel(0, ha->mem_ptr + IPS_REG_FLAP); udelay(25); /* 25 us */ } @@ -6545,11 +6545,11 @@ ips_program_bios_memio(ips_ha_t * ha, char *buffer, uint32_t buffersize, if (timeout == 0) { /* timeout error */ writel(0, ha->mem_ptr + IPS_REG_FLAP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ writeb(0xFF, ha->mem_ptr + IPS_REG_FLDP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ return (1); @@ -6559,11 +6559,11 @@ ips_program_bios_memio(ips_ha_t * ha, char *buffer, uint32_t buffersize, if (status & 0x18) { /* programming error */ writel(0, ha->mem_ptr + IPS_REG_FLAP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ writeb(0xFF, ha->mem_ptr + IPS_REG_FLDP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ return (1); @@ -6572,11 +6572,11 @@ ips_program_bios_memio(ips_ha_t * ha, char *buffer, uint32_t buffersize, /* Enable reading */ writel(0, ha->mem_ptr + IPS_REG_FLAP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ writeb(0xFF, ha->mem_ptr + IPS_REG_FLDP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ return (0); @@ -6601,14 +6601,14 @@ ips_verify_bios(ips_ha_t * ha, char *buffer, uint32_t buffersize, /* test 1st byte */ outl(0, ha->io_addr + IPS_REG_FLAP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ if (inb(ha->io_addr + IPS_REG_FLDP) != 0x55) return (1); outl(cpu_to_le32(1), ha->io_addr + IPS_REG_FLAP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ if (inb(ha->io_addr + IPS_REG_FLDP) != 0xAA) return (1); @@ -6617,7 +6617,7 @@ ips_verify_bios(ips_ha_t * ha, char *buffer, uint32_t buffersize, for (i = 2; i < buffersize; i++) { outl(cpu_to_le32(i + offset), ha->io_addr + IPS_REG_FLAP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ checksum = (uint8_t) checksum + inb(ha->io_addr + IPS_REG_FLDP); @@ -6650,14 +6650,14 @@ ips_verify_bios_memio(ips_ha_t * ha, char *buffer, uint32_t buffersize, /* test 1st byte */ writel(0, ha->mem_ptr + IPS_REG_FLAP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ if (readb(ha->mem_ptr + IPS_REG_FLDP) != 0x55) return (1); writel(1, ha->mem_ptr + IPS_REG_FLAP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ if (readb(ha->mem_ptr + IPS_REG_FLDP) != 0xAA) return (1); @@ -6666,7 +6666,7 @@ ips_verify_bios_memio(ips_ha_t * ha, char *buffer, uint32_t buffersize, for (i = 2; i < buffersize; i++) { writel(i + offset, ha->mem_ptr + IPS_REG_FLAP); - if (ha->revision_id == IPS_REVID_TROMBONE64) + if (ha->pcidev->revision == IPS_REVID_TROMBONE64) udelay(25); /* 25 us */ checksum = @@ -6837,9 +6837,9 @@ ips_register_scsi(int index) } ha = IPS_HA(sh); memcpy(ha, oldha, sizeof (ips_ha_t)); - free_irq(oldha->irq, oldha); + free_irq(oldha->pcidev->irq, oldha); /* Install the interrupt handler with the new ha */ - if (request_irq(ha->irq, do_ipsintr, IRQF_SHARED, ips_name, ha)) { + if (request_irq(ha->pcidev->irq, do_ipsintr, IRQF_SHARED, ips_name, ha)) { IPS_PRINTK(KERN_WARNING, ha->pcidev, "Unable to install interrupt handler\n"); scsi_host_put(sh); @@ -6851,10 +6851,7 @@ ips_register_scsi(int index) ips_ha[index] = ha; /* Store away needed values for later use */ - sh->io_port = ha->io_addr; - sh->n_io_port = ha->io_addr ? 255 : 0; sh->unique_id = (ha->io_addr) ? ha->io_addr : ha->mem_addr; - sh->irq = ha->irq; sh->sg_tablesize = sh->hostt->sg_tablesize; sh->can_queue = sh->hostt->can_queue; sh->cmd_per_lun = sh->hostt->cmd_per_lun; @@ -6992,8 +6989,6 @@ ips_init_phase1(struct pci_dev *pci_dev, int *indexPtr) uint32_t mem_len; uint8_t bus; uint8_t func; - uint8_t irq; - uint16_t subdevice_id; int j; int index; dma_addr_t dma_address; @@ -7014,7 +7009,6 @@ ips_init_phase1(struct pci_dev *pci_dev, int *indexPtr) return -1; /* stuff that we get in dev */ - irq = pci_dev->irq; bus = pci_dev->bus->number; func = pci_dev->devfn; @@ -7068,8 +7062,6 @@ ips_init_phase1(struct pci_dev *pci_dev, int *indexPtr) } } - subdevice_id = pci_dev->subsystem_device; - /* found a controller */ ha = kzalloc(sizeof (ips_ha_t), GFP_KERNEL); if (ha == NULL) { @@ -7084,7 +7076,6 @@ ips_init_phase1(struct pci_dev *pci_dev, int *indexPtr) ha->active = 1; /* Store info in HA structure */ - ha->irq = irq; ha->io_addr = io_addr; ha->io_len = io_len; ha->mem_addr = mem_addr; @@ -7092,10 +7083,7 @@ ips_init_phase1(struct pci_dev *pci_dev, int *indexPtr) ha->mem_ptr = mem_ptr; ha->ioremap_ptr = ioremap_ptr; ha->host_num = (uint32_t) index; - ha->revision_id = pci_dev->revision; ha->slot_num = PCI_SLOT(pci_dev->devfn); - ha->device_id = pci_dev->device; - ha->subdevice_id = subdevice_id; ha->pcidev = pci_dev; /* @@ -7240,7 +7228,7 @@ ips_init_phase2(int index) } /* Install the interrupt handler */ - if (request_irq(ha->irq, do_ipsintr, IRQF_SHARED, ips_name, ha)) { + if (request_irq(ha->pcidev->irq, do_ipsintr, IRQF_SHARED, ips_name, ha)) { IPS_PRINTK(KERN_WARNING, ha->pcidev, "Unable to install interrupt handler\n"); return ips_abort_init(ha, index); @@ -7253,14 +7241,14 @@ ips_init_phase2(int index) if (!ips_allocatescbs(ha)) { IPS_PRINTK(KERN_WARNING, ha->pcidev, "Unable to allocate a CCB\n"); - free_irq(ha->irq, ha); + free_irq(ha->pcidev->irq, ha); return ips_abort_init(ha, index); } if (!ips_hainit(ha)) { IPS_PRINTK(KERN_WARNING, ha->pcidev, "Unable to initialize controller\n"); - free_irq(ha->irq, ha); + free_irq(ha->pcidev->irq, ha); return ips_abort_init(ha, index); } /* Free the temporary SCB */ @@ -7270,7 +7258,7 @@ ips_init_phase2(int index) if (!ips_allocatescbs(ha)) { IPS_PRINTK(KERN_WARNING, ha->pcidev, "Unable to allocate CCBs\n"); - free_irq(ha->irq, ha); + free_irq(ha->pcidev->irq, ha); return ips_abort_init(ha, index); } diff --git a/drivers/scsi/ips.h b/drivers/scsi/ips.h index 3bcbd9ff056b..fb4a03661ce1 100644 --- a/drivers/scsi/ips.h +++ b/drivers/scsi/ips.h @@ -60,14 +60,14 @@ */ #define IPS_HA(x) ((ips_ha_t *) x->hostdata) #define IPS_COMMAND_ID(ha, scb) (int) (scb - ha->scbs) - #define IPS_IS_TROMBONE(ha) (((ha->device_id == IPS_DEVICEID_COPPERHEAD) && \ - (ha->revision_id >= IPS_REVID_TROMBONE32) && \ - (ha->revision_id <= IPS_REVID_TROMBONE64)) ? 1 : 0) - #define IPS_IS_CLARINET(ha) (((ha->device_id == IPS_DEVICEID_COPPERHEAD) && \ - (ha->revision_id >= IPS_REVID_CLARINETP1) && \ - (ha->revision_id <= IPS_REVID_CLARINETP3)) ? 1 : 0) - #define IPS_IS_MORPHEUS(ha) (ha->device_id == IPS_DEVICEID_MORPHEUS) - #define IPS_IS_MARCO(ha) (ha->device_id == IPS_DEVICEID_MARCO) + #define IPS_IS_TROMBONE(ha) (((ha->pcidev->device == IPS_DEVICEID_COPPERHEAD) && \ + (ha->pcidev->revision >= IPS_REVID_TROMBONE32) && \ + (ha->pcidev->revision <= IPS_REVID_TROMBONE64)) ? 1 : 0) + #define IPS_IS_CLARINET(ha) (((ha->pcidev->device == IPS_DEVICEID_COPPERHEAD) && \ + (ha->pcidev->revision >= IPS_REVID_CLARINETP1) && \ + (ha->pcidev->revision <= IPS_REVID_CLARINETP3)) ? 1 : 0) + #define IPS_IS_MORPHEUS(ha) (ha->pcidev->device == IPS_DEVICEID_MORPHEUS) + #define IPS_IS_MARCO(ha) (ha->pcidev->device == IPS_DEVICEID_MARCO) #define IPS_USE_I2O_DELIVER(ha) ((IPS_IS_MORPHEUS(ha) || \ (IPS_IS_TROMBONE(ha) && \ (ips_force_i2o))) ? 1 : 0) @@ -1034,7 +1034,6 @@ typedef struct ips_ha { uint8_t ha_id[IPS_MAX_CHANNELS+1]; uint32_t dcdb_active[IPS_MAX_CHANNELS]; uint32_t io_addr; /* Base I/O address */ - uint8_t irq; /* IRQ for adapter */ uint8_t ntargets; /* Number of targets */ uint8_t nbus; /* Number of buses */ uint8_t nlun; /* Number of Luns */ @@ -1066,10 +1065,7 @@ typedef struct ips_ha { int ioctl_reset; /* IOCTL Requested Reset Flag */ uint16_t reset_count; /* number of resets */ time_t last_ffdc; /* last time we sent ffdc info*/ - uint8_t revision_id; /* Revision level */ - uint16_t device_id; /* PCI device ID */ uint8_t slot_num; /* PCI Slot Number */ - uint16_t subdevice_id; /* Subsystem device ID */ int ioctl_len; /* size of ioctl buffer */ dma_addr_t ioctl_busaddr; /* dma address of ioctl buffer*/ uint8_t bios_version[8]; /* BIOS Revision */ -- cgit v1.2.3-59-g8ed1b From 2f277d6a719064f830211d0a0e104a37da2ac116 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 13 Dec 2007 16:14:08 -0800 Subject: [SCSI] ips: trim trailing whitespace [akpm@linux-foundation.org: coding style fixes] Signed-off-by: Jeff Garzik Acked-by: "Salyzyn, Mark" Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- drivers/scsi/ips.c | 49 +++++++++++++++++++++++++------------------------ drivers/scsi/ips.h | 12 ++++++------ 2 files changed, 31 insertions(+), 30 deletions(-) diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c index 595a91afca0e..0da3dfa3150a 100644 --- a/drivers/scsi/ips.c +++ b/drivers/scsi/ips.c @@ -389,17 +389,17 @@ static struct pci_device_id ips_pci_table[] = { MODULE_DEVICE_TABLE( pci, ips_pci_table ); static char ips_hot_plug_name[] = "ips"; - + static int __devinit ips_insert_device(struct pci_dev *pci_dev, const struct pci_device_id *ent); static void __devexit ips_remove_device(struct pci_dev *pci_dev); - + static struct pci_driver ips_pci_driver = { .name = ips_hot_plug_name, .id_table = ips_pci_table, .probe = ips_insert_device, .remove = __devexit_p(ips_remove_device), }; - + /* * Necessary forward function protoypes @@ -587,7 +587,7 @@ static void ips_setup_funclist(ips_ha_t * ha) { - /* + /* * Setup Functions */ if (IPS_IS_MORPHEUS(ha) || IPS_IS_MARCO(ha)) { @@ -2081,7 +2081,7 @@ ips_host_info(ips_ha_t * ha, char *ptr, off_t offset, int len) /* That keeps everything happy for "text" operations on the proc file. */ if (le32_to_cpu(ha->nvram->signature) == IPS_NVRAM_P5_SIG) { - if (ha->nvram->bios_low[3] == 0) { + if (ha->nvram->bios_low[3] == 0) { copy_info(&info, "\tBIOS Version : %c%c%c%c%c%c%c\n", ha->nvram->bios_high[0], ha->nvram->bios_high[1], @@ -2780,10 +2780,11 @@ ips_next(ips_ha_t * ha, int intr) scb->dcdb.cmd_attribute = ips_command_direction[scb->scsi_cmd->cmnd[0]]; - /* Allow a WRITE BUFFER Command to Have no Data */ - /* This is Used by Tape Flash Utilites */ - if ((scb->scsi_cmd->cmnd[0] == WRITE_BUFFER) && (scb->data_len == 0)) - scb->dcdb.cmd_attribute = 0; + /* Allow a WRITE BUFFER Command to Have no Data */ + /* This is Used by Tape Flash Utilites */ + if ((scb->scsi_cmd->cmnd[0] == WRITE_BUFFER) && + (scb->data_len == 0)) + scb->dcdb.cmd_attribute = 0; if (!(scb->dcdb.cmd_attribute & 0x3)) scb->dcdb.transfer_length = 0; @@ -3404,7 +3405,7 @@ ips_map_status(ips_ha_t * ha, ips_scb_t * scb, ips_stat_t * sp) /* Restrict access to physical DASD */ if (scb->scsi_cmd->cmnd[0] == INQUIRY) { - ips_scmd_buf_read(scb->scsi_cmd, + ips_scmd_buf_read(scb->scsi_cmd, &inquiryData, sizeof (inquiryData)); if ((inquiryData.DeviceType & 0x1f) == TYPE_DISK) { errcode = DID_TIME_OUT; @@ -4090,10 +4091,10 @@ ips_chkstatus(ips_ha_t * ha, IPS_STATUS * pstatus) scb->scsi_cmd->result = errcode << 16; } else { /* bus == 0 */ /* restrict access to physical drives */ - if (scb->scsi_cmd->cmnd[0] == INQUIRY) { - ips_scmd_buf_read(scb->scsi_cmd, + if (scb->scsi_cmd->cmnd[0] == INQUIRY) { + ips_scmd_buf_read(scb->scsi_cmd, &inquiryData, sizeof (inquiryData)); - if ((inquiryData.DeviceType & 0x1f) == TYPE_DISK) + if ((inquiryData.DeviceType & 0x1f) == TYPE_DISK) scb->scsi_cmd->result = DID_TIME_OUT << 16; } } /* else */ @@ -4661,8 +4662,8 @@ ips_isinit_morpheus(ips_ha_t * ha) uint32_t bits; METHOD_TRACE("ips_is_init_morpheus", 1); - - if (ips_isintr_morpheus(ha)) + + if (ips_isintr_morpheus(ha)) ips_flush_and_reset(ha); post = readl(ha->mem_ptr + IPS_REG_I960_MSG0); @@ -4686,7 +4687,7 @@ ips_isinit_morpheus(ips_ha_t * ha) /* state ( was trying to INIT and an interrupt was already pending ) ... */ /* */ /****************************************************************************/ -static void +static void ips_flush_and_reset(ips_ha_t *ha) { ips_scb_t *scb; @@ -4718,9 +4719,9 @@ ips_flush_and_reset(ips_ha_t *ha) if (ret == IPS_SUCCESS) { time = 60 * IPS_ONE_SEC; /* Max Wait time is 60 seconds */ done = 0; - + while ((time > 0) && (!done)) { - done = ips_poll_for_flush_complete(ha); + done = ips_poll_for_flush_complete(ha); /* This may look evil, but it's only done during extremely rare start-up conditions ! */ udelay(1000); time--; @@ -4749,17 +4750,17 @@ static int ips_poll_for_flush_complete(ips_ha_t * ha) { IPS_STATUS cstatus; - + while (TRUE) { cstatus.value = (*ha->func.statupd) (ha); if (cstatus.value == 0xffffffff) /* If No Interrupt to process */ break; - + /* Success is when we see the Flush Command ID */ - if (cstatus.fields.command_id == IPS_MAX_CMDS ) + if (cstatus.fields.command_id == IPS_MAX_CMDS) return 1; - } + } return 0; } @@ -5920,7 +5921,7 @@ ips_read_config(ips_ha_t * ha, int intr) return (0); } - + memcpy(ha->conf, ha->ioctl_data, sizeof(*ha->conf)); return (1); } @@ -5959,7 +5960,7 @@ ips_readwrite_page5(ips_ha_t * ha, int write, int intr) scb->cmd.nvram.buffer_addr = ha->ioctl_busaddr; if (write) memcpy(ha->ioctl_data, ha->nvram, sizeof(*ha->nvram)); - + /* issue the command */ if (((ret = ips_send_wait(ha, scb, ips_cmd_timeout, intr)) == IPS_FAILURE) diff --git a/drivers/scsi/ips.h b/drivers/scsi/ips.h index fb4a03661ce1..e0657b6f009c 100644 --- a/drivers/scsi/ips.h +++ b/drivers/scsi/ips.h @@ -92,7 +92,7 @@ #ifndef min #define min(x,y) ((x) < (y) ? x : y) #endif - + #ifndef __iomem /* For clean compiles in earlier kernels without __iomem annotations */ #define __iomem #endif @@ -171,7 +171,7 @@ #define IPS_CMD_DOWNLOAD 0x20 #define IPS_CMD_RW_BIOSFW 0x22 #define IPS_CMD_GET_VERSION_INFO 0xC6 - #define IPS_CMD_RESET_CHANNEL 0x1A + #define IPS_CMD_RESET_CHANNEL 0x1A /* * Adapter Equates @@ -458,7 +458,7 @@ typedef struct { uint32_t reserved3; uint32_t buffer_addr; uint32_t reserved4; -} IPS_IOCTL_CMD, *PIPS_IOCTL_CMD; +} IPS_IOCTL_CMD, *PIPS_IOCTL_CMD; typedef struct { uint8_t op_code; @@ -552,7 +552,7 @@ typedef struct { uint32_t cccr; } IPS_NVRAM_CMD, *PIPS_NVRAM_CMD; -typedef struct +typedef struct { uint8_t op_code; uint8_t command_id; @@ -650,7 +650,7 @@ typedef struct { uint8_t device_address; uint8_t cmd_attribute; uint8_t cdb_length; - uint8_t reserved_for_LUN; + uint8_t reserved_for_LUN; uint32_t transfer_length; uint32_t buffer_pointer; uint16_t sg_count; @@ -790,7 +790,7 @@ typedef struct { /* SubSystem Parameter[4] */ #define IPS_GET_VERSION_SUPPORT 0x00018000 /* Mask for Versioning Support */ -typedef struct +typedef struct { uint32_t revision; uint8_t bootBlkVersion[32]; -- cgit v1.2.3-59-g8ed1b From 21e1a5f26c437591f67779a97e5cc95ebbb02e90 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 13 Dec 2007 16:14:09 -0800 Subject: [SCSI] ips: PCI API cleanups * pass Scsi_Host to ips_remove_device() via pci_set_drvdata(), allowing us to eliminate the ips_ha[] search loop and call ips_release() directly. * call pci_{request,release}_regions() and eliminate individual request/release_[mem_]region() calls * call pci_disable_device(), paired with pci_enable_device() * s/0/NULL/ in a few places * check ioremap() return value Signed-off-by: Jeff Garzik Acked-by: "Salyzyn, Mark" Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- drivers/scsi/ips.c | 72 +++++++++++++++++++++++------------------------------- 1 file changed, 31 insertions(+), 41 deletions(-) diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c index 0da3dfa3150a..5f194a807f94 100644 --- a/drivers/scsi/ips.c +++ b/drivers/scsi/ips.c @@ -702,10 +702,6 @@ ips_release(struct Scsi_Host *sh) /* free extra memory */ ips_free(ha); - /* Free I/O Region */ - if (ha->io_addr) - release_region(ha->io_addr, ha->io_len); - /* free IRQ */ free_irq(ha->pcidev->irq, ha); @@ -4394,8 +4390,6 @@ ips_free(ips_ha_t * ha) ha->mem_ptr = NULL; } - if (ha->mem_addr) - release_mem_region(ha->mem_addr, ha->mem_len); ha->mem_addr = 0; } @@ -6880,20 +6874,14 @@ ips_register_scsi(int index) static void __devexit ips_remove_device(struct pci_dev *pci_dev) { - int i; - struct Scsi_Host *sh; - ips_ha_t *ha; + struct Scsi_Host *sh = pci_get_drvdata(pci_dev); - for (i = 0; i < IPS_MAX_ADAPTERS; i++) { - ha = ips_ha[i]; - if (ha) { - if ((pci_dev->bus->number == ha->pcidev->bus->number) && - (pci_dev->devfn == ha->pcidev->devfn)) { - sh = ips_sh[i]; - ips_release(sh); - } - } - } + pci_set_drvdata(pci_dev, NULL); + + ips_release(sh); + + pci_release_regions(pci_dev); + pci_disable_device(pci_dev); } /****************************************************************************/ @@ -6947,12 +6935,17 @@ module_exit(ips_module_exit); static int __devinit ips_insert_device(struct pci_dev *pci_dev, const struct pci_device_id *ent) { - int uninitialized_var(index); + int index = -1; int rc; METHOD_TRACE("ips_insert_device", 1); - if (pci_enable_device(pci_dev)) - return -1; + rc = pci_enable_device(pci_dev); + if (rc) + return rc; + + rc = pci_request_regions(pci_dev, "ips"); + if (rc) + goto err_out; rc = ips_init_phase1(pci_dev, &index); if (rc == SUCCESS) @@ -6968,6 +6961,19 @@ ips_insert_device(struct pci_dev *pci_dev, const struct pci_device_id *ent) ips_num_controllers++; ips_next_controller = ips_num_controllers; + + if (rc < 0) { + rc = -ENODEV; + goto err_out_regions; + } + + pci_set_drvdata(pci_dev, ips_sh[index]); + return 0; + +err_out_regions: + pci_release_regions(pci_dev); +err_out: + pci_disable_device(pci_dev); return rc; } @@ -7000,7 +7006,7 @@ ips_init_phase1(struct pci_dev *pci_dev, int *indexPtr) METHOD_TRACE("ips_init_phase1", 1); index = IPS_MAX_ADAPTERS; for (j = 0; j < IPS_MAX_ADAPTERS; j++) { - if (ips_ha[j] == 0) { + if (ips_ha[j] == NULL) { index = j; break; } @@ -7037,32 +7043,17 @@ ips_init_phase1(struct pci_dev *pci_dev, int *indexPtr) uint32_t base; uint32_t offs; - if (!request_mem_region(mem_addr, mem_len, "ips")) { - IPS_PRINTK(KERN_WARNING, pci_dev, - "Couldn't allocate IO Memory space %x len %d.\n", - mem_addr, mem_len); - return -1; - } - base = mem_addr & PAGE_MASK; offs = mem_addr - base; ioremap_ptr = ioremap(base, PAGE_SIZE); + if (!ioremap_ptr) + return -1; mem_ptr = ioremap_ptr + offs; } else { ioremap_ptr = NULL; mem_ptr = NULL; } - /* setup I/O mapped area (if applicable) */ - if (io_addr) { - if (!request_region(io_addr, io_len, "ips")) { - IPS_PRINTK(KERN_WARNING, pci_dev, - "Couldn't allocate IO space %x len %d.\n", - io_addr, io_len); - return -1; - } - } - /* found a controller */ ha = kzalloc(sizeof (ips_ha_t), GFP_KERNEL); if (ha == NULL) { @@ -7071,7 +7062,6 @@ ips_init_phase1(struct pci_dev *pci_dev, int *indexPtr) return -1; } - ips_sh[index] = NULL; ips_ha[index] = ha; ha->active = 1; -- cgit v1.2.3-59-g8ed1b From 2551a13e61d3c3df6c2da6de5a3ece78e6d67111 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 13 Dec 2007 16:14:10 -0800 Subject: [SCSI] ips: handle scsi_add_host() failure, and other err cleanups Signed-off-by: Jeff Garzik Acked-by: "Salyzyn, Mark" Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- drivers/scsi/ips.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c index 5f194a807f94..e54d30c6a342 100644 --- a/drivers/scsi/ips.c +++ b/drivers/scsi/ips.c @@ -6837,13 +6837,10 @@ ips_register_scsi(int index) if (request_irq(ha->pcidev->irq, do_ipsintr, IRQF_SHARED, ips_name, ha)) { IPS_PRINTK(KERN_WARNING, ha->pcidev, "Unable to install interrupt handler\n"); - scsi_host_put(sh); - return -1; + goto err_out_sh; } kfree(oldha); - ips_sh[index] = sh; - ips_ha[index] = ha; /* Store away needed values for later use */ sh->unique_id = (ha->io_addr) ? ha->io_addr : ha->mem_addr; @@ -6859,10 +6856,21 @@ ips_register_scsi(int index) sh->max_channel = ha->nbus - 1; sh->can_queue = ha->max_cmds - 1; - scsi_add_host(sh, NULL); + if (scsi_add_host(sh, &ha->pcidev->dev)) + goto err_out; + + ips_sh[index] = sh; + ips_ha[index] = ha; + scsi_scan_host(sh); return 0; + +err_out: + free_irq(ha->pcidev->irq, ha); +err_out_sh: + scsi_host_put(sh); + return -1; } /*---------------------------------------------------------------------------*/ -- cgit v1.2.3-59-g8ed1b From a7ed0448e28ce6154390bf690b8b5c37853732dc Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 29 Oct 2007 11:20:35 -0700 Subject: [SCSI] aic94xx: fix section mismatches Fix section mismatch warning: WARNING: vmlinux.o(.init.text+0x23be6): Section mismatch: reference to .exit.text:asd_unmap_ha (between 'asd_pci_probe' and 'qla4xxx_module_init') + WARNING: vmlinux.o(.text+0x1ec8a8): Section mismatch: reference to .exit.text:as d_unmap_ioport (between 'asd_unmap_ha' and 'asd_remove_dev_attrs') WARNING: vmlinux.o(.text+0x1ec8b1): Section mismatch: reference to .exit.text:as d_unmap_memio (between 'asd_unmap_ha' and 'asd_remove_dev_attrs') Signed-off-by: Randy Dunlap Signed-off-by: James Bottomley --- drivers/scsi/aic94xx/aic94xx_init.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c index de0667011e13..5d761eb67442 100644 --- a/drivers/scsi/aic94xx/aic94xx_init.c +++ b/drivers/scsi/aic94xx/aic94xx_init.c @@ -136,7 +136,7 @@ Err: return err; } -static void __devexit asd_unmap_memio(struct asd_ha_struct *asd_ha) +static void asd_unmap_memio(struct asd_ha_struct *asd_ha) { struct asd_ha_addrspace *io_handle; @@ -173,7 +173,7 @@ static int __devinit asd_map_ioport(struct asd_ha_struct *asd_ha) return err; } -static void __devexit asd_unmap_ioport(struct asd_ha_struct *asd_ha) +static void asd_unmap_ioport(struct asd_ha_struct *asd_ha) { pci_release_region(asd_ha->pcidev, PCI_IOBAR_OFFSET); } @@ -210,7 +210,7 @@ Err: return err; } -static void __devexit asd_unmap_ha(struct asd_ha_struct *asd_ha) +static void asd_unmap_ha(struct asd_ha_struct *asd_ha) { if (asd_ha->iospace) asd_unmap_ioport(asd_ha); -- cgit v1.2.3-59-g8ed1b From 00f5970193e22c48f399a2430635d6416b51befe Mon Sep 17 00:00:00 2001 From: HighPoint Linux Team Date: Thu, 13 Dec 2007 16:14:26 -0800 Subject: [SCSI] hptiop: add more adapter models and other fixes Most code changes were made to support adapters based on Marvell IOP, plus some other fixes. - add more PCI device IDs - support for adapters based on Marvell IOP - fix a result code translation error on big-endian systems - fix resource releasing bug when scsi_host_alloc() fail in hptiop_probe() - update scsi_cmnd.resid when finishing a request - correct some coding style issues [akpm@linux-foundation.org: type fixes] Signed-off-by: HighPoint Linux Team Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- Documentation/scsi/hptiop.txt | 30 ++- drivers/scsi/Kconfig | 4 +- drivers/scsi/hptiop.c | 593 +++++++++++++++++++++++++++++++++--------- drivers/scsi/hptiop.h | 124 ++++++--- 4 files changed, 576 insertions(+), 175 deletions(-) diff --git a/Documentation/scsi/hptiop.txt b/Documentation/scsi/hptiop.txt index d28a31247d4c..a6eb4add1be6 100644 --- a/Documentation/scsi/hptiop.txt +++ b/Documentation/scsi/hptiop.txt @@ -1,9 +1,9 @@ -HIGHPOINT ROCKETRAID 3xxx RAID DRIVER (hptiop) +HIGHPOINT ROCKETRAID 3xxx/4xxx ADAPTER DRIVER (hptiop) Controller Register Map ------------------------- -The controller IOP is accessed via PCI BAR0. +For Intel IOP based adapters, the controller IOP is accessed via PCI BAR0: BAR0 offset Register 0x10 Inbound Message Register 0 @@ -18,6 +18,24 @@ The controller IOP is accessed via PCI BAR0. 0x40 Inbound Queue Port 0x44 Outbound Queue Port +For Marvell IOP based adapters, the IOP is accessed via PCI BAR0 and BAR1: + + BAR0 offset Register + 0x20400 Inbound Doorbell Register + 0x20404 Inbound Interrupt Mask Register + 0x20408 Outbound Doorbell Register + 0x2040C Outbound Interrupt Mask Register + + BAR1 offset Register + 0x0 Inbound Queue Head Pointer + 0x4 Inbound Queue Tail Pointer + 0x8 Outbound Queue Head Pointer + 0xC Outbound Queue Tail Pointer + 0x10 Inbound Message Register + 0x14 Outbound Message Register + 0x40-0x1040 Inbound Queue + 0x1040-0x2040 Outbound Queue + I/O Request Workflow ---------------------- @@ -73,15 +91,9 @@ The driver exposes following sysfs attributes: driver-version R driver version string firmware-version R firmware version string -The driver registers char device "hptiop" to communicate with HighPoint RAID -management software. Its ioctl routine acts as a general binary interface -between the IOP firmware and HighPoint RAID management software. New management -functions can be implemented in application/firmware without modification -in driver code. - ----------------------------------------------------------------------------- -Copyright (C) 2006 HighPoint Technologies, Inc. All Rights Reserved. +Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved. This file is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index becbb09d4c9b..e397599d54e3 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -573,10 +573,10 @@ config SCSI_ARCMSR_AER source "drivers/scsi/megaraid/Kconfig.megaraid" config SCSI_HPTIOP - tristate "HighPoint RocketRAID 3xxx Controller support" + tristate "HighPoint RocketRAID 3xxx/4xxx Controller support" depends on SCSI && PCI help - This option enables support for HighPoint RocketRAID 3xxx + This option enables support for HighPoint RocketRAID 3xxx/4xxx controllers. To compile this driver as a module, choose M here; the module diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c index 0844331abb87..df1a76438e29 100644 --- a/drivers/scsi/hptiop.c +++ b/drivers/scsi/hptiop.c @@ -1,5 +1,5 @@ /* - * HighPoint RR3xxx controller driver for Linux + * HighPoint RR3xxx/4xxx controller driver for Linux * Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved. * * This program is free software; you can redistribute it and/or modify @@ -38,80 +38,84 @@ #include "hptiop.h" MODULE_AUTHOR("HighPoint Technologies, Inc."); -MODULE_DESCRIPTION("HighPoint RocketRAID 3xxx SATA Controller Driver"); +MODULE_DESCRIPTION("HighPoint RocketRAID 3xxx/4xxx Controller Driver"); static char driver_name[] = "hptiop"; -static const char driver_name_long[] = "RocketRAID 3xxx SATA Controller driver"; -static const char driver_ver[] = "v1.2 (070830)"; - -static void hptiop_host_request_callback(struct hptiop_hba *hba, u32 tag); -static void hptiop_iop_request_callback(struct hptiop_hba *hba, u32 tag); +static const char driver_name_long[] = "RocketRAID 3xxx/4xxx Controller driver"; +static const char driver_ver[] = "v1.3 (071203)"; + +static int iop_send_sync_msg(struct hptiop_hba *hba, u32 msg, u32 millisec); +static void hptiop_finish_scsi_req(struct hptiop_hba *hba, u32 tag, + struct hpt_iop_request_scsi_command *req); +static void hptiop_host_request_callback_itl(struct hptiop_hba *hba, u32 tag); +static void hptiop_iop_request_callback_itl(struct hptiop_hba *hba, u32 tag); static void hptiop_message_callback(struct hptiop_hba *hba, u32 msg); -static inline void hptiop_pci_posting_flush(struct hpt_iopmu __iomem *iop) -{ - readl(&iop->outbound_intstatus); -} - -static int iop_wait_ready(struct hpt_iopmu __iomem *iop, u32 millisec) +static int iop_wait_ready_itl(struct hptiop_hba *hba, u32 millisec) { u32 req = 0; int i; for (i = 0; i < millisec; i++) { - req = readl(&iop->inbound_queue); + req = readl(&hba->u.itl.iop->inbound_queue); if (req != IOPMU_QUEUE_EMPTY) break; msleep(1); } if (req != IOPMU_QUEUE_EMPTY) { - writel(req, &iop->outbound_queue); - hptiop_pci_posting_flush(iop); + writel(req, &hba->u.itl.iop->outbound_queue); + readl(&hba->u.itl.iop->outbound_intstatus); return 0; } return -1; } -static void hptiop_request_callback(struct hptiop_hba *hba, u32 tag) +static int iop_wait_ready_mv(struct hptiop_hba *hba, u32 millisec) +{ + return iop_send_sync_msg(hba, IOPMU_INBOUND_MSG0_NOP, millisec); +} + +static void hptiop_request_callback_itl(struct hptiop_hba *hba, u32 tag) { if (tag & IOPMU_QUEUE_ADDR_HOST_BIT) - return hptiop_host_request_callback(hba, + hptiop_host_request_callback_itl(hba, tag & ~IOPMU_QUEUE_ADDR_HOST_BIT); else - return hptiop_iop_request_callback(hba, tag); + hptiop_iop_request_callback_itl(hba, tag); } -static inline void hptiop_drain_outbound_queue(struct hptiop_hba *hba) +static void hptiop_drain_outbound_queue_itl(struct hptiop_hba *hba) { u32 req; - while ((req = readl(&hba->iop->outbound_queue)) != IOPMU_QUEUE_EMPTY) { + while ((req = readl(&hba->u.itl.iop->outbound_queue)) != + IOPMU_QUEUE_EMPTY) { if (req & IOPMU_QUEUE_MASK_HOST_BITS) - hptiop_request_callback(hba, req); + hptiop_request_callback_itl(hba, req); else { struct hpt_iop_request_header __iomem * p; p = (struct hpt_iop_request_header __iomem *) - ((char __iomem *)hba->iop + req); + ((char __iomem *)hba->u.itl.iop + req); if (readl(&p->flags) & IOP_REQUEST_FLAG_SYNC_REQUEST) { if (readl(&p->context)) - hptiop_request_callback(hba, req); + hptiop_request_callback_itl(hba, req); else writel(1, &p->context); } else - hptiop_request_callback(hba, req); + hptiop_request_callback_itl(hba, req); } } } -static int __iop_intr(struct hptiop_hba *hba) +static int iop_intr_itl(struct hptiop_hba *hba) { - struct hpt_iopmu __iomem *iop = hba->iop; + struct hpt_iopmu_itl __iomem *iop = hba->u.itl.iop; u32 status; int ret = 0; @@ -119,6 +123,7 @@ static int __iop_intr(struct hptiop_hba *hba) if (status & IOPMU_OUTBOUND_INT_MSG0) { u32 msg = readl(&iop->outbound_msgaddr0); + dprintk("received outbound msg %x\n", msg); writel(IOPMU_OUTBOUND_INT_MSG0, &iop->outbound_intstatus); hptiop_message_callback(hba, msg); @@ -126,31 +131,115 @@ static int __iop_intr(struct hptiop_hba *hba) } if (status & IOPMU_OUTBOUND_INT_POSTQUEUE) { - hptiop_drain_outbound_queue(hba); + hptiop_drain_outbound_queue_itl(hba); + ret = 1; + } + + return ret; +} + +static u64 mv_outbound_read(struct hpt_iopmu_mv __iomem *mu) +{ + u32 outbound_tail = readl(&mu->outbound_tail); + u32 outbound_head = readl(&mu->outbound_head); + + if (outbound_tail != outbound_head) { + u64 p; + + memcpy_fromio(&p, &mu->outbound_q[mu->outbound_tail], 8); + outbound_tail++; + + if (outbound_tail == MVIOP_QUEUE_LEN) + outbound_tail = 0; + writel(outbound_tail, &mu->outbound_tail); + return p; + } else + return 0; +} + +static void mv_inbound_write(u64 p, struct hptiop_hba *hba) +{ + u32 inbound_head = readl(&hba->u.mv.mu->inbound_head); + u32 head = inbound_head + 1; + + if (head == MVIOP_QUEUE_LEN) + head = 0; + + memcpy_toio(&hba->u.mv.mu->inbound_q[inbound_head], &p, 8); + writel(head, &hba->u.mv.mu->inbound_head); + writel(MVIOP_MU_INBOUND_INT_POSTQUEUE, + &hba->u.mv.regs->inbound_doorbell); +} + +static void hptiop_request_callback_mv(struct hptiop_hba *hba, u64 tag) +{ + u32 req_type = (tag >> 5) & 0x7; + struct hpt_iop_request_scsi_command *req; + + dprintk("hptiop_request_callback_mv: tag=%llx\n", tag); + + BUG_ON((tag & MVIOP_MU_QUEUE_REQUEST_RETURN_CONTEXT) == 0); + + switch (req_type) { + case IOP_REQUEST_TYPE_GET_CONFIG: + case IOP_REQUEST_TYPE_SET_CONFIG: + hba->msg_done = 1; + break; + + case IOP_REQUEST_TYPE_SCSI_COMMAND: + req = hba->reqs[tag >> 8].req_virt; + if (likely(tag & MVIOP_MU_QUEUE_REQUEST_RESULT_BIT)) + req->header.result = cpu_to_le32(IOP_RESULT_SUCCESS); + + hptiop_finish_scsi_req(hba, tag>>8, req); + break; + + default: + break; + } +} + +static int iop_intr_mv(struct hptiop_hba *hba) +{ + u32 status; + int ret = 0; + + status = readl(&hba->u.mv.regs->outbound_doorbell); + writel(~status, &hba->u.mv.regs->outbound_doorbell); + + if (status & MVIOP_MU_OUTBOUND_INT_MSG) { + u32 msg; + msg = readl(&hba->u.mv.mu->outbound_msg); + dprintk("received outbound msg %x\n", msg); + hptiop_message_callback(hba, msg); + ret = 1; + } + + if (status & MVIOP_MU_OUTBOUND_INT_POSTQUEUE) { + u64 tag; + + while ((tag = mv_outbound_read(hba->u.mv.mu))) + hptiop_request_callback_mv(hba, tag); ret = 1; } return ret; } -static int iop_send_sync_request(struct hptiop_hba *hba, +static int iop_send_sync_request_itl(struct hptiop_hba *hba, void __iomem *_req, u32 millisec) { struct hpt_iop_request_header __iomem *req = _req; u32 i; - writel(readl(&req->flags) | IOP_REQUEST_FLAG_SYNC_REQUEST, - &req->flags); - + writel(readl(&req->flags) | IOP_REQUEST_FLAG_SYNC_REQUEST, &req->flags); writel(0, &req->context); - - writel((unsigned long)req - (unsigned long)hba->iop, - &hba->iop->inbound_queue); - - hptiop_pci_posting_flush(hba->iop); + writel((unsigned long)req - (unsigned long)hba->u.itl.iop, + &hba->u.itl.iop->inbound_queue); + readl(&hba->u.itl.iop->outbound_intstatus); for (i = 0; i < millisec; i++) { - __iop_intr(hba); + iop_intr_itl(hba); if (readl(&req->context)) return 0; msleep(1); @@ -159,19 +248,49 @@ static int iop_send_sync_request(struct hptiop_hba *hba, return -1; } -static int iop_send_sync_msg(struct hptiop_hba *hba, u32 msg, u32 millisec) +static int iop_send_sync_request_mv(struct hptiop_hba *hba, + u32 size_bits, u32 millisec) { + struct hpt_iop_request_header *reqhdr = hba->u.mv.internal_req; u32 i; hba->msg_done = 0; + reqhdr->flags |= cpu_to_le32(IOP_REQUEST_FLAG_SYNC_REQUEST); + mv_inbound_write(hba->u.mv.internal_req_phy | + MVIOP_MU_QUEUE_ADDR_HOST_BIT | size_bits, hba); + + for (i = 0; i < millisec; i++) { + iop_intr_mv(hba); + if (hba->msg_done) + return 0; + msleep(1); + } + return -1; +} + +static void hptiop_post_msg_itl(struct hptiop_hba *hba, u32 msg) +{ + writel(msg, &hba->u.itl.iop->inbound_msgaddr0); + readl(&hba->u.itl.iop->outbound_intstatus); +} + +static void hptiop_post_msg_mv(struct hptiop_hba *hba, u32 msg) +{ + writel(msg, &hba->u.mv.mu->inbound_msg); + writel(MVIOP_MU_INBOUND_INT_MSG, &hba->u.mv.regs->inbound_doorbell); + readl(&hba->u.mv.regs->inbound_doorbell); +} - writel(msg, &hba->iop->inbound_msgaddr0); +static int iop_send_sync_msg(struct hptiop_hba *hba, u32 msg, u32 millisec) +{ + u32 i; - hptiop_pci_posting_flush(hba->iop); + hba->msg_done = 0; + hba->ops->post_msg(hba, msg); for (i = 0; i < millisec; i++) { spin_lock_irq(hba->host->host_lock); - __iop_intr(hba); + hba->ops->iop_intr(hba); spin_unlock_irq(hba->host->host_lock); if (hba->msg_done) break; @@ -181,46 +300,67 @@ static int iop_send_sync_msg(struct hptiop_hba *hba, u32 msg, u32 millisec) return hba->msg_done? 0 : -1; } -static int iop_get_config(struct hptiop_hba *hba, +static int iop_get_config_itl(struct hptiop_hba *hba, struct hpt_iop_request_get_config *config) { u32 req32; struct hpt_iop_request_get_config __iomem *req; - req32 = readl(&hba->iop->inbound_queue); + req32 = readl(&hba->u.itl.iop->inbound_queue); if (req32 == IOPMU_QUEUE_EMPTY) return -1; req = (struct hpt_iop_request_get_config __iomem *) - ((unsigned long)hba->iop + req32); + ((unsigned long)hba->u.itl.iop + req32); writel(0, &req->header.flags); writel(IOP_REQUEST_TYPE_GET_CONFIG, &req->header.type); writel(sizeof(struct hpt_iop_request_get_config), &req->header.size); writel(IOP_RESULT_PENDING, &req->header.result); - if (iop_send_sync_request(hba, req, 20000)) { + if (iop_send_sync_request_itl(hba, req, 20000)) { dprintk("Get config send cmd failed\n"); return -1; } memcpy_fromio(config, req, sizeof(*config)); - writel(req32, &hba->iop->outbound_queue); + writel(req32, &hba->u.itl.iop->outbound_queue); + return 0; +} + +static int iop_get_config_mv(struct hptiop_hba *hba, + struct hpt_iop_request_get_config *config) +{ + struct hpt_iop_request_get_config *req = hba->u.mv.internal_req; + + req->header.flags = cpu_to_le32(IOP_REQUEST_FLAG_OUTPUT_CONTEXT); + req->header.type = cpu_to_le32(IOP_REQUEST_TYPE_GET_CONFIG); + req->header.size = + cpu_to_le32(sizeof(struct hpt_iop_request_get_config)); + req->header.result = cpu_to_le32(IOP_RESULT_PENDING); + req->header.context = cpu_to_le64(IOP_REQUEST_TYPE_GET_CONFIG<<5); + + if (iop_send_sync_request_mv(hba, 0, 20000)) { + dprintk("Get config send cmd failed\n"); + return -1; + } + + memcpy(config, req, sizeof(struct hpt_iop_request_get_config)); return 0; } -static int iop_set_config(struct hptiop_hba *hba, +static int iop_set_config_itl(struct hptiop_hba *hba, struct hpt_iop_request_set_config *config) { u32 req32; struct hpt_iop_request_set_config __iomem *req; - req32 = readl(&hba->iop->inbound_queue); + req32 = readl(&hba->u.itl.iop->inbound_queue); if (req32 == IOPMU_QUEUE_EMPTY) return -1; req = (struct hpt_iop_request_set_config __iomem *) - ((unsigned long)hba->iop + req32); + ((unsigned long)hba->u.itl.iop + req32); memcpy_toio((u8 __iomem *)req + sizeof(struct hpt_iop_request_header), (u8 *)config + sizeof(struct hpt_iop_request_header), @@ -232,22 +372,52 @@ static int iop_set_config(struct hptiop_hba *hba, writel(sizeof(struct hpt_iop_request_set_config), &req->header.size); writel(IOP_RESULT_PENDING, &req->header.result); - if (iop_send_sync_request(hba, req, 20000)) { + if (iop_send_sync_request_itl(hba, req, 20000)) { dprintk("Set config send cmd failed\n"); return -1; } - writel(req32, &hba->iop->outbound_queue); + writel(req32, &hba->u.itl.iop->outbound_queue); return 0; } -static int hptiop_initialize_iop(struct hptiop_hba *hba) +static int iop_set_config_mv(struct hptiop_hba *hba, + struct hpt_iop_request_set_config *config) { - struct hpt_iopmu __iomem *iop = hba->iop; + struct hpt_iop_request_set_config *req = hba->u.mv.internal_req; - /* enable interrupts */ + memcpy(req, config, sizeof(struct hpt_iop_request_set_config)); + req->header.flags = cpu_to_le32(IOP_REQUEST_FLAG_OUTPUT_CONTEXT); + req->header.type = cpu_to_le32(IOP_REQUEST_TYPE_SET_CONFIG); + req->header.size = + cpu_to_le32(sizeof(struct hpt_iop_request_set_config)); + req->header.result = cpu_to_le32(IOP_RESULT_PENDING); + req->header.context = cpu_to_le64(IOP_REQUEST_TYPE_SET_CONFIG<<5); + + if (iop_send_sync_request_mv(hba, 0, 20000)) { + dprintk("Set config send cmd failed\n"); + return -1; + } + + return 0; +} + +static void hptiop_enable_intr_itl(struct hptiop_hba *hba) +{ writel(~(IOPMU_OUTBOUND_INT_POSTQUEUE | IOPMU_OUTBOUND_INT_MSG0), - &iop->outbound_intmask); + &hba->u.itl.iop->outbound_intmask); +} + +static void hptiop_enable_intr_mv(struct hptiop_hba *hba) +{ + writel(MVIOP_MU_OUTBOUND_INT_POSTQUEUE | MVIOP_MU_OUTBOUND_INT_MSG, + &hba->u.mv.regs->outbound_intmask); +} + +static int hptiop_initialize_iop(struct hptiop_hba *hba) +{ + /* enable interrupts */ + hba->ops->enable_intr(hba); hba->initialized = 1; @@ -261,37 +431,74 @@ static int hptiop_initialize_iop(struct hptiop_hba *hba) return 0; } -static int hptiop_map_pci_bar(struct hptiop_hba *hba) +static void __iomem *hptiop_map_pci_bar(struct hptiop_hba *hba, int index) { u32 mem_base_phy, length; void __iomem *mem_base_virt; + struct pci_dev *pcidev = hba->pcidev; - if (!(pci_resource_flags(pcidev, 0) & IORESOURCE_MEM)) { + + if (!(pci_resource_flags(pcidev, index) & IORESOURCE_MEM)) { printk(KERN_ERR "scsi%d: pci resource invalid\n", hba->host->host_no); - return -1; + return 0; } - mem_base_phy = pci_resource_start(pcidev, 0); - length = pci_resource_len(pcidev, 0); + mem_base_phy = pci_resource_start(pcidev, index); + length = pci_resource_len(pcidev, index); mem_base_virt = ioremap(mem_base_phy, length); if (!mem_base_virt) { printk(KERN_ERR "scsi%d: Fail to ioremap memory space\n", hba->host->host_no); + return 0; + } + return mem_base_virt; +} + +static int hptiop_map_pci_bar_itl(struct hptiop_hba *hba) +{ + hba->u.itl.iop = hptiop_map_pci_bar(hba, 0); + if (hba->u.itl.iop) + return 0; + else + return -1; +} + +static void hptiop_unmap_pci_bar_itl(struct hptiop_hba *hba) +{ + iounmap(hba->u.itl.iop); +} + +static int hptiop_map_pci_bar_mv(struct hptiop_hba *hba) +{ + hba->u.mv.regs = hptiop_map_pci_bar(hba, 0); + if (hba->u.mv.regs == 0) + return -1; + + hba->u.mv.mu = hptiop_map_pci_bar(hba, 2); + if (hba->u.mv.mu == 0) { + iounmap(hba->u.mv.regs); return -1; } - hba->iop = mem_base_virt; - dprintk("hptiop_map_pci_bar: iop=%p\n", hba->iop); return 0; } +static void hptiop_unmap_pci_bar_mv(struct hptiop_hba *hba) +{ + iounmap(hba->u.mv.regs); + iounmap(hba->u.mv.mu); +} + static void hptiop_message_callback(struct hptiop_hba *hba, u32 msg) { dprintk("iop message 0x%x\n", msg); + if (msg == IOPMU_INBOUND_MSG0_NOP) + hba->msg_done = 1; + if (!hba->initialized) return; @@ -303,7 +510,7 @@ static void hptiop_message_callback(struct hptiop_hba *hba, u32 msg) hba->msg_done = 1; } -static inline struct hptiop_request *get_req(struct hptiop_hba *hba) +static struct hptiop_request *get_req(struct hptiop_hba *hba) { struct hptiop_request *ret; @@ -316,30 +523,19 @@ static inline struct hptiop_request *get_req(struct hptiop_hba *hba) return ret; } -static inline void free_req(struct hptiop_hba *hba, struct hptiop_request *req) +static void free_req(struct hptiop_hba *hba, struct hptiop_request *req) { dprintk("free_req(%d, %p)\n", req->index, req); req->next = hba->req_list; hba->req_list = req; } -static void hptiop_host_request_callback(struct hptiop_hba *hba, u32 _tag) +static void hptiop_finish_scsi_req(struct hptiop_hba *hba, u32 tag, + struct hpt_iop_request_scsi_command *req) { - struct hpt_iop_request_scsi_command *req; struct scsi_cmnd *scp; - u32 tag; - - if (hba->iopintf_v2) { - tag = _tag & ~ IOPMU_QUEUE_REQUEST_RESULT_BIT; - req = hba->reqs[tag].req_virt; - if (likely(_tag & IOPMU_QUEUE_REQUEST_RESULT_BIT)) - req->header.result = IOP_RESULT_SUCCESS; - } else { - tag = _tag; - req = hba->reqs[tag].req_virt; - } - dprintk("hptiop_host_request_callback: req=%p, type=%d, " + dprintk("hptiop_finish_scsi_req: req=%p, type=%d, " "result=%d, context=0x%x tag=%d\n", req, req->header.type, req->header.result, req->header.context, tag); @@ -354,6 +550,8 @@ static void hptiop_host_request_callback(struct hptiop_hba *hba, u32 _tag) switch (le32_to_cpu(req->header.result)) { case IOP_RESULT_SUCCESS: + scsi_set_resid(scp, + scsi_bufflen(scp) - le32_to_cpu(req->dataxfer_length)); scp->result = (DID_OK<<16); break; case IOP_RESULT_BAD_TARGET: @@ -371,12 +569,12 @@ static void hptiop_host_request_callback(struct hptiop_hba *hba, u32 _tag) case IOP_RESULT_INVALID_REQUEST: scp->result = (DID_ABORT<<16); break; - case IOP_RESULT_MODE_SENSE_CHECK_CONDITION: + case IOP_RESULT_CHECK_CONDITION: + scsi_set_resid(scp, + scsi_bufflen(scp) - le32_to_cpu(req->dataxfer_length)); scp->result = SAM_STAT_CHECK_CONDITION; - memset(&scp->sense_buffer, - 0, sizeof(scp->sense_buffer)); memcpy(&scp->sense_buffer, &req->sg_list, - min(sizeof(scp->sense_buffer), + min_t(size_t, sizeof(scp->sense_buffer), le32_to_cpu(req->dataxfer_length))); break; @@ -391,15 +589,33 @@ static void hptiop_host_request_callback(struct hptiop_hba *hba, u32 _tag) free_req(hba, &hba->reqs[tag]); } -void hptiop_iop_request_callback(struct hptiop_hba *hba, u32 tag) +static void hptiop_host_request_callback_itl(struct hptiop_hba *hba, u32 _tag) +{ + struct hpt_iop_request_scsi_command *req; + u32 tag; + + if (hba->iopintf_v2) { + tag = _tag & ~IOPMU_QUEUE_REQUEST_RESULT_BIT; + req = hba->reqs[tag].req_virt; + if (likely(_tag & IOPMU_QUEUE_REQUEST_RESULT_BIT)) + req->header.result = cpu_to_le32(IOP_RESULT_SUCCESS); + } else { + tag = _tag; + req = hba->reqs[tag].req_virt; + } + + hptiop_finish_scsi_req(hba, tag, req); +} + +void hptiop_iop_request_callback_itl(struct hptiop_hba *hba, u32 tag) { struct hpt_iop_request_header __iomem *req; struct hpt_iop_request_ioctl_command __iomem *p; struct hpt_ioctl_k *arg; req = (struct hpt_iop_request_header __iomem *) - ((unsigned long)hba->iop + tag); - dprintk("hptiop_iop_request_callback: req=%p, type=%d, " + ((unsigned long)hba->u.itl.iop + tag); + dprintk("hptiop_iop_request_callback_itl: req=%p, type=%d, " "result=%d, context=0x%x tag=%d\n", req, readl(&req->type), readl(&req->result), readl(&req->context), tag); @@ -427,7 +643,7 @@ void hptiop_iop_request_callback(struct hptiop_hba *hba, u32 tag) arg->result = HPT_IOCTL_RESULT_FAILED; arg->done(arg); - writel(tag, &hba->iop->outbound_queue); + writel(tag, &hba->u.itl.iop->outbound_queue); } static irqreturn_t hptiop_intr(int irq, void *dev_id) @@ -437,7 +653,7 @@ static irqreturn_t hptiop_intr(int irq, void *dev_id) unsigned long flags; spin_lock_irqsave(hba->host->host_lock, flags); - handled = __iop_intr(hba); + handled = hba->ops->iop_intr(hba); spin_unlock_irqrestore(hba->host->host_lock, flags); return handled; @@ -469,6 +685,57 @@ static int hptiop_buildsgl(struct scsi_cmnd *scp, struct hpt_iopsg *psg) return HPT_SCP(scp)->sgcnt; } +static void hptiop_post_req_itl(struct hptiop_hba *hba, + struct hptiop_request *_req) +{ + struct hpt_iop_request_header *reqhdr = _req->req_virt; + + reqhdr->context = cpu_to_le32(IOPMU_QUEUE_ADDR_HOST_BIT | + (u32)_req->index); + reqhdr->context_hi32 = 0; + + if (hba->iopintf_v2) { + u32 size, size_bits; + + size = le32_to_cpu(reqhdr->size); + if (size < 256) + size_bits = IOPMU_QUEUE_REQUEST_SIZE_BIT; + else if (size < 512) + size_bits = IOPMU_QUEUE_ADDR_HOST_BIT; + else + size_bits = IOPMU_QUEUE_REQUEST_SIZE_BIT | + IOPMU_QUEUE_ADDR_HOST_BIT; + writel(_req->req_shifted_phy | size_bits, + &hba->u.itl.iop->inbound_queue); + } else + writel(_req->req_shifted_phy | IOPMU_QUEUE_ADDR_HOST_BIT, + &hba->u.itl.iop->inbound_queue); +} + +static void hptiop_post_req_mv(struct hptiop_hba *hba, + struct hptiop_request *_req) +{ + struct hpt_iop_request_header *reqhdr = _req->req_virt; + u32 size, size_bit; + + reqhdr->context = cpu_to_le32(_req->index<<8 | + IOP_REQUEST_TYPE_SCSI_COMMAND<<5); + reqhdr->context_hi32 = 0; + size = le32_to_cpu(reqhdr->size); + + if (size <= 256) + size_bit = 0; + else if (size <= 256*2) + size_bit = 1; + else if (size <= 256*3) + size_bit = 2; + else + size_bit = 3; + + mv_inbound_write((_req->req_shifted_phy << 5) | + MVIOP_MU_QUEUE_ADDR_HOST_BIT | size_bit, hba); +} + static int hptiop_queuecommand(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *)) { @@ -518,9 +785,6 @@ static int hptiop_queuecommand(struct scsi_cmnd *scp, req->header.flags = cpu_to_le32(IOP_REQUEST_FLAG_OUTPUT_CONTEXT); req->header.type = cpu_to_le32(IOP_REQUEST_TYPE_SCSI_COMMAND); req->header.result = cpu_to_le32(IOP_RESULT_PENDING); - req->header.context = cpu_to_le32(IOPMU_QUEUE_ADDR_HOST_BIT | - (u32)_req->index); - req->header.context_hi32 = 0; req->dataxfer_length = cpu_to_le32(scsi_bufflen(scp)); req->channel = scp->device->channel; req->target = scp->device->id; @@ -531,21 +795,7 @@ static int hptiop_queuecommand(struct scsi_cmnd *scp, + sg_count * sizeof(struct hpt_iopsg)); memcpy(req->cdb, scp->cmnd, sizeof(req->cdb)); - - if (hba->iopintf_v2) { - u32 size_bits; - if (req->header.size < 256) - size_bits = IOPMU_QUEUE_REQUEST_SIZE_BIT; - else if (req->header.size < 512) - size_bits = IOPMU_QUEUE_ADDR_HOST_BIT; - else - size_bits = IOPMU_QUEUE_REQUEST_SIZE_BIT | - IOPMU_QUEUE_ADDR_HOST_BIT; - writel(_req->req_shifted_phy | size_bits, &hba->iop->inbound_queue); - } else - writel(_req->req_shifted_phy | IOPMU_QUEUE_ADDR_HOST_BIT, - &hba->iop->inbound_queue); - + hba->ops->post_req(hba, _req); return 0; cmd_done: @@ -563,9 +813,7 @@ static int hptiop_reset_hba(struct hptiop_hba *hba) { if (atomic_xchg(&hba->resetting, 1) == 0) { atomic_inc(&hba->reset_count); - writel(IOPMU_INBOUND_MSG0_RESET, - &hba->iop->inbound_msgaddr0); - hptiop_pci_posting_flush(hba->iop); + hba->ops->post_msg(hba, IOPMU_INBOUND_MSG0_RESET); } wait_event_timeout(hba->reset_wq, @@ -601,8 +849,10 @@ static int hptiop_reset(struct scsi_cmnd *scp) static int hptiop_adjust_disk_queue_depth(struct scsi_device *sdev, int queue_depth) { - if(queue_depth > 256) - queue_depth = 256; + struct hptiop_hba *hba = (struct hptiop_hba *)sdev->host->hostdata; + + if (queue_depth > hba->max_requests) + queue_depth = hba->max_requests; scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, queue_depth); return queue_depth; } @@ -663,6 +913,26 @@ static struct scsi_host_template driver_template = { .change_queue_depth = hptiop_adjust_disk_queue_depth, }; +static int hptiop_internal_memalloc_mv(struct hptiop_hba *hba) +{ + hba->u.mv.internal_req = dma_alloc_coherent(&hba->pcidev->dev, + 0x800, &hba->u.mv.internal_req_phy, GFP_KERNEL); + if (hba->u.mv.internal_req) + return 0; + else + return -1; +} + +static int hptiop_internal_memfree_mv(struct hptiop_hba *hba) +{ + if (hba->u.mv.internal_req) { + dma_free_coherent(&hba->pcidev->dev, 0x800, + hba->u.mv.internal_req, hba->u.mv.internal_req_phy); + return 0; + } else + return -1; +} + static int __devinit hptiop_probe(struct pci_dev *pcidev, const struct pci_device_id *id) { @@ -708,6 +978,7 @@ static int __devinit hptiop_probe(struct pci_dev *pcidev, hba = (struct hptiop_hba *)host->hostdata; + hba->ops = (struct hptiop_adapter_ops *)id->driver_data; hba->pcidev = pcidev; hba->host = host; hba->initialized = 0; @@ -725,16 +996,24 @@ static int __devinit hptiop_probe(struct pci_dev *pcidev, host->n_io_port = 0; host->irq = pcidev->irq; - if (hptiop_map_pci_bar(hba)) + if (hba->ops->map_pci_bar(hba)) goto free_scsi_host; - if (iop_wait_ready(hba->iop, 20000)) { + if (hba->ops->iop_wait_ready(hba, 20000)) { printk(KERN_ERR "scsi%d: firmware not ready\n", hba->host->host_no); goto unmap_pci_bar; } - if (iop_get_config(hba, &iop_config)) { + if (hba->ops->internal_memalloc) { + if (hba->ops->internal_memalloc(hba)) { + printk(KERN_ERR "scsi%d: internal_memalloc failed\n", + hba->host->host_no); + goto unmap_pci_bar; + } + } + + if (hba->ops->get_config(hba, &iop_config)) { printk(KERN_ERR "scsi%d: get config failed\n", hba->host->host_no); goto unmap_pci_bar; @@ -770,7 +1049,7 @@ static int __devinit hptiop_probe(struct pci_dev *pcidev, set_config.vbus_id = cpu_to_le16(host->host_no); set_config.max_host_request_size = cpu_to_le16(req_size); - if (iop_set_config(hba, &set_config)) { + if (hba->ops->set_config(hba, &set_config)) { printk(KERN_ERR "scsi%d: set config failed\n", hba->host->host_no); goto unmap_pci_bar; @@ -839,21 +1118,24 @@ static int __devinit hptiop_probe(struct pci_dev *pcidev, free_request_mem: dma_free_coherent(&hba->pcidev->dev, - hba->req_size*hba->max_requests + 0x20, + hba->req_size * hba->max_requests + 0x20, hba->dma_coherent, hba->dma_coherent_handle); free_request_irq: free_irq(hba->pcidev->irq, hba); unmap_pci_bar: - iounmap(hba->iop); + if (hba->ops->internal_memfree) + hba->ops->internal_memfree(hba); -free_pci_regions: - pci_release_regions(pcidev) ; + hba->ops->unmap_pci_bar(hba); free_scsi_host: scsi_host_put(host); +free_pci_regions: + pci_release_regions(pcidev); + disable_pci_device: pci_disable_device(pcidev); @@ -865,8 +1147,6 @@ static void hptiop_shutdown(struct pci_dev *pcidev) { struct Scsi_Host *host = pci_get_drvdata(pcidev); struct hptiop_hba *hba = (struct hptiop_hba *)host->hostdata; - struct hpt_iopmu __iomem *iop = hba->iop; - u32 int_mask; dprintk("hptiop_shutdown(%p)\n", hba); @@ -876,11 +1156,24 @@ static void hptiop_shutdown(struct pci_dev *pcidev) hba->host->host_no); /* disable all outbound interrupts */ - int_mask = readl(&iop->outbound_intmask); + hba->ops->disable_intr(hba); +} + +static void hptiop_disable_intr_itl(struct hptiop_hba *hba) +{ + u32 int_mask; + + int_mask = readl(&hba->u.itl.iop->outbound_intmask); writel(int_mask | IOPMU_OUTBOUND_INT_MSG0 | IOPMU_OUTBOUND_INT_POSTQUEUE, - &iop->outbound_intmask); - hptiop_pci_posting_flush(iop); + &hba->u.itl.iop->outbound_intmask); + readl(&hba->u.itl.iop->outbound_intmask); +} + +static void hptiop_disable_intr_mv(struct hptiop_hba *hba) +{ + writel(0, &hba->u.mv.regs->outbound_intmask); + readl(&hba->u.mv.regs->outbound_intmask); } static void hptiop_remove(struct pci_dev *pcidev) @@ -901,7 +1194,10 @@ static void hptiop_remove(struct pci_dev *pcidev) hba->dma_coherent, hba->dma_coherent_handle); - iounmap(hba->iop); + if (hba->ops->internal_memfree) + hba->ops->internal_memfree(hba); + + hba->ops->unmap_pci_bar(hba); pci_release_regions(hba->pcidev); pci_set_drvdata(hba->pcidev, NULL); @@ -910,11 +1206,50 @@ static void hptiop_remove(struct pci_dev *pcidev) scsi_host_put(host); } +static struct hptiop_adapter_ops hptiop_itl_ops = { + .iop_wait_ready = iop_wait_ready_itl, + .internal_memalloc = 0, + .internal_memfree = 0, + .map_pci_bar = hptiop_map_pci_bar_itl, + .unmap_pci_bar = hptiop_unmap_pci_bar_itl, + .enable_intr = hptiop_enable_intr_itl, + .disable_intr = hptiop_disable_intr_itl, + .get_config = iop_get_config_itl, + .set_config = iop_set_config_itl, + .iop_intr = iop_intr_itl, + .post_msg = hptiop_post_msg_itl, + .post_req = hptiop_post_req_itl, +}; + +static struct hptiop_adapter_ops hptiop_mv_ops = { + .iop_wait_ready = iop_wait_ready_mv, + .internal_memalloc = hptiop_internal_memalloc_mv, + .internal_memfree = hptiop_internal_memfree_mv, + .map_pci_bar = hptiop_map_pci_bar_mv, + .unmap_pci_bar = hptiop_unmap_pci_bar_mv, + .enable_intr = hptiop_enable_intr_mv, + .disable_intr = hptiop_disable_intr_mv, + .get_config = iop_get_config_mv, + .set_config = iop_set_config_mv, + .iop_intr = iop_intr_mv, + .post_msg = hptiop_post_msg_mv, + .post_req = hptiop_post_req_mv, +}; + static struct pci_device_id hptiop_id_table[] = { - { PCI_VDEVICE(TTI, 0x3220) }, - { PCI_VDEVICE(TTI, 0x3320) }, - { PCI_VDEVICE(TTI, 0x3520) }, - { PCI_VDEVICE(TTI, 0x4320) }, + { PCI_VDEVICE(TTI, 0x3220), (kernel_ulong_t)&hptiop_itl_ops }, + { PCI_VDEVICE(TTI, 0x3320), (kernel_ulong_t)&hptiop_itl_ops }, + { PCI_VDEVICE(TTI, 0x3520), (kernel_ulong_t)&hptiop_itl_ops }, + { PCI_VDEVICE(TTI, 0x4320), (kernel_ulong_t)&hptiop_itl_ops }, + { PCI_VDEVICE(TTI, 0x3510), (kernel_ulong_t)&hptiop_itl_ops }, + { PCI_VDEVICE(TTI, 0x3511), (kernel_ulong_t)&hptiop_itl_ops }, + { PCI_VDEVICE(TTI, 0x3521), (kernel_ulong_t)&hptiop_itl_ops }, + { PCI_VDEVICE(TTI, 0x3522), (kernel_ulong_t)&hptiop_itl_ops }, + { PCI_VDEVICE(TTI, 0x3410), (kernel_ulong_t)&hptiop_itl_ops }, + { PCI_VDEVICE(TTI, 0x3540), (kernel_ulong_t)&hptiop_itl_ops }, + { PCI_VDEVICE(TTI, 0x3120), (kernel_ulong_t)&hptiop_mv_ops }, + { PCI_VDEVICE(TTI, 0x3122), (kernel_ulong_t)&hptiop_mv_ops }, + { PCI_VDEVICE(TTI, 0x3020), (kernel_ulong_t)&hptiop_mv_ops }, {}, }; diff --git a/drivers/scsi/hptiop.h b/drivers/scsi/hptiop.h index 2a5e46e001cb..a0289f219752 100644 --- a/drivers/scsi/hptiop.h +++ b/drivers/scsi/hptiop.h @@ -1,5 +1,5 @@ /* - * HighPoint RR3xxx controller driver for Linux + * HighPoint RR3xxx/4xxx controller driver for Linux * Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved. * * This program is free software; you can redistribute it and/or modify @@ -18,8 +18,7 @@ #ifndef _HPTIOP_H_ #define _HPTIOP_H_ -struct hpt_iopmu -{ +struct hpt_iopmu_itl { __le32 resrved0[4]; __le32 inbound_msgaddr0; __le32 inbound_msgaddr1; @@ -54,6 +53,40 @@ struct hpt_iopmu #define IOPMU_INBOUND_INT_ERROR 8 #define IOPMU_INBOUND_INT_POSTQUEUE 0x10 +#define MVIOP_QUEUE_LEN 512 + +struct hpt_iopmu_mv { + __le32 inbound_head; + __le32 inbound_tail; + __le32 outbound_head; + __le32 outbound_tail; + __le32 inbound_msg; + __le32 outbound_msg; + __le32 reserve[10]; + __le64 inbound_q[MVIOP_QUEUE_LEN]; + __le64 outbound_q[MVIOP_QUEUE_LEN]; +}; + +struct hpt_iopmv_regs { + __le32 reserved[0x20400 / 4]; + __le32 inbound_doorbell; + __le32 inbound_intmask; + __le32 outbound_doorbell; + __le32 outbound_intmask; +}; + +#define MVIOP_MU_QUEUE_ADDR_HOST_MASK (~(0x1full)) +#define MVIOP_MU_QUEUE_ADDR_HOST_BIT 4 + +#define MVIOP_MU_QUEUE_ADDR_IOP_HIGH32 0xffffffff +#define MVIOP_MU_QUEUE_REQUEST_RESULT_BIT 1 +#define MVIOP_MU_QUEUE_REQUEST_RETURN_CONTEXT 2 + +#define MVIOP_MU_INBOUND_INT_MSG 1 +#define MVIOP_MU_INBOUND_INT_POSTQUEUE 2 +#define MVIOP_MU_OUTBOUND_INT_MSG 1 +#define MVIOP_MU_OUTBOUND_INT_POSTQUEUE 2 + enum hpt_iopmu_message { /* host-to-iop messages */ IOPMU_INBOUND_MSG0_NOP = 0, @@ -72,8 +105,7 @@ enum hpt_iopmu_message { IOPMU_OUTBOUND_MSG0_REVALIDATE_DEVICE_MAX = 0x3ff, }; -struct hpt_iop_request_header -{ +struct hpt_iop_request_header { __le32 size; __le32 type; __le32 flags; @@ -104,11 +136,10 @@ enum hpt_iop_result_type { IOP_RESULT_RESET, IOP_RESULT_INVALID_REQUEST, IOP_RESULT_BAD_TARGET, - IOP_RESULT_MODE_SENSE_CHECK_CONDITION, + IOP_RESULT_CHECK_CONDITION, }; -struct hpt_iop_request_get_config -{ +struct hpt_iop_request_get_config { struct hpt_iop_request_header header; __le32 interface_version; __le32 firmware_version; @@ -121,8 +152,7 @@ struct hpt_iop_request_get_config __le32 sdram_size; }; -struct hpt_iop_request_set_config -{ +struct hpt_iop_request_set_config { struct hpt_iop_request_header header; __le32 iop_id; __le16 vbus_id; @@ -130,15 +160,13 @@ struct hpt_iop_request_set_config __le32 reserve[6]; }; -struct hpt_iopsg -{ +struct hpt_iopsg { __le32 size; __le32 eot; /* non-zero: end of table */ __le64 pci_address; }; -struct hpt_iop_request_block_command -{ +struct hpt_iop_request_block_command { struct hpt_iop_request_header header; u8 channel; u8 target; @@ -156,8 +184,7 @@ struct hpt_iop_request_block_command #define IOP_BLOCK_COMMAND_FLUSH 4 #define IOP_BLOCK_COMMAND_SHUTDOWN 5 -struct hpt_iop_request_scsi_command -{ +struct hpt_iop_request_scsi_command { struct hpt_iop_request_header header; u8 channel; u8 target; @@ -168,8 +195,7 @@ struct hpt_iop_request_scsi_command struct hpt_iopsg sg_list[1]; }; -struct hpt_iop_request_ioctl_command -{ +struct hpt_iop_request_ioctl_command { struct hpt_iop_request_header header; __le32 ioctl_code; __le32 inbuf_size; @@ -182,11 +208,11 @@ struct hpt_iop_request_ioctl_command #define HPTIOP_MAX_REQUESTS 256u struct hptiop_request { - struct hptiop_request * next; - void * req_virt; - u32 req_shifted_phy; - struct scsi_cmnd * scp; - int index; + struct hptiop_request *next; + void *req_virt; + u32 req_shifted_phy; + struct scsi_cmnd *scp; + int index; }; struct hpt_scsi_pointer { @@ -198,9 +224,21 @@ struct hpt_scsi_pointer { #define HPT_SCP(scp) ((struct hpt_scsi_pointer *)&(scp)->SCp) struct hptiop_hba { - struct hpt_iopmu __iomem * iop; - struct Scsi_Host * host; - struct pci_dev * pcidev; + struct hptiop_adapter_ops *ops; + union { + struct { + struct hpt_iopmu_itl __iomem *iop; + } itl; + struct { + struct hpt_iopmv_regs *regs; + struct hpt_iopmu_mv __iomem *mu; + void *internal_req; + dma_addr_t internal_req_phy; + } mv; + } u; + + struct Scsi_Host *host; + struct pci_dev *pcidev; /* IOP config info */ u32 interface_version; @@ -213,15 +251,15 @@ struct hptiop_hba { u32 req_size; /* host-allocated request buffer size */ - int iopintf_v2: 1; - int initialized: 1; - int msg_done: 1; + u32 iopintf_v2: 1; + u32 initialized: 1; + u32 msg_done: 1; struct hptiop_request * req_list; struct hptiop_request reqs[HPTIOP_MAX_REQUESTS]; /* used to free allocated dma area */ - void * dma_coherent; + void *dma_coherent; dma_addr_t dma_coherent_handle; atomic_t reset_count; @@ -231,19 +269,35 @@ struct hptiop_hba { wait_queue_head_t ioctl_wq; }; -struct hpt_ioctl_k -{ +struct hpt_ioctl_k { struct hptiop_hba * hba; u32 ioctl_code; u32 inbuf_size; u32 outbuf_size; - void * inbuf; - void * outbuf; - u32 * bytes_returned; + void *inbuf; + void *outbuf; + u32 *bytes_returned; void (*done)(struct hpt_ioctl_k *); int result; /* HPT_IOCTL_RESULT_ */ }; +struct hptiop_adapter_ops { + int (*iop_wait_ready)(struct hptiop_hba *hba, u32 millisec); + int (*internal_memalloc)(struct hptiop_hba *hba); + int (*internal_memfree)(struct hptiop_hba *hba); + int (*map_pci_bar)(struct hptiop_hba *hba); + void (*unmap_pci_bar)(struct hptiop_hba *hba); + void (*enable_intr)(struct hptiop_hba *hba); + void (*disable_intr)(struct hptiop_hba *hba); + int (*get_config)(struct hptiop_hba *hba, + struct hpt_iop_request_get_config *config); + int (*set_config)(struct hptiop_hba *hba, + struct hpt_iop_request_set_config *config); + int (*iop_intr)(struct hptiop_hba *hba); + void (*post_msg)(struct hptiop_hba *hba, u32 msg); + void (*post_req)(struct hptiop_hba *hba, struct hptiop_request *_req); +}; + #define HPT_IOCTL_RESULT_OK 0 #define HPT_IOCTL_RESULT_FAILED (-1) -- cgit v1.2.3-59-g8ed1b From 94cf6ba11b068b8a8f68a1e88bffb6827e92124b Mon Sep 17 00:00:00 2001 From: "Salyzyn, Mark" Date: Thu, 13 Dec 2007 16:14:18 -0800 Subject: [SCSI] aacraid: fix driver failure with Dell PowerEdge Expandable RAID Controller 3/Di As reported in http://bugzilla.kernel.org/show_bug.cgi?id=3D9133 it was discovered that the PERC line of controllers lacked a key 64 bit ScatterGather capable SCSI pass-through function. The adapters are still capable of 64 bit ScatterGather I/O commands, but these two can not be mixed. This problem was exacerbated by the introduction of the SCSI Generic access to the DASD physical devices. The fix for users before this patch is applied is aacraid.dacmode=3D0 on the kernel command line to disable 64 bit I/O. The enclosed patch introduces a new adapter quirk and tries to limp along by enabling pass-through in situations where memory is 32 bit addressable on 64 bit machines, or disable the pass-through functions altogether. I expect that the check for 32 bit addressable memory to be controversial in that it can be incorrect in non-Dell non-Intel systems that PERC would never be installed under, the alternative is to disable pass-through in all cases which could be reported as another regression. Pass-through is used for SCSI Generic access to the physical devices, or for the management applications to properly function. In systems where this patch has disabled pass-through because it is unsupportable in combination with I/O performance, the user can choose to enable pass-through by turning off dacmode (aacraid.dacmode=3D0) or limiting the discovered kernel memory (mem=3D4G) with an associated loss in runtime performance. If we chose instead to turn off 64 bit dacmode for the adapters with this quirk, then this would be reported as another regression. Signed-off-by: Mark Salyzyn Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- drivers/scsi/aacraid/aachba.c | 15 ++++++++++++++- drivers/scsi/aacraid/aacraid.h | 6 ++++++ drivers/scsi/aacraid/commsup.c | 6 +++--- drivers/scsi/aacraid/linit.c | 42 ++++++++++++++++++++++++------------------ 4 files changed, 47 insertions(+), 22 deletions(-) diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index 641c303d28ef..cef764eba307 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -1190,6 +1190,15 @@ static int aac_scsi_32(struct fib * fib, struct scsi_cmnd * cmd) (fib_callback) aac_srb_callback, (void *) cmd); } +static int aac_scsi_32_64(struct fib * fib, struct scsi_cmnd * cmd) +{ + if ((sizeof(dma_addr_t) > 4) && + (num_physpages > (0xFFFFFFFFULL >> PAGE_SHIFT)) && + (fib->dev->adapter_info.options & AAC_OPT_SGMAP_HOST64)) + return FAILED; + return aac_scsi_32(fib, cmd); +} + int aac_get_adapter_info(struct aac_dev* dev) { struct fib* fibptr; @@ -1267,6 +1276,8 @@ int aac_get_adapter_info(struct aac_dev* dev) 1, 1, NULL, NULL); + /* reasoned default */ + dev->maximum_num_physicals = 16; if (rcode >= 0 && le32_to_cpu(bus_info->Status) == ST_OK) { dev->maximum_num_physicals = le32_to_cpu(bus_info->TargetsPerBus); dev->maximum_num_channels = le32_to_cpu(bus_info->BusCount); @@ -1377,7 +1388,9 @@ int aac_get_adapter_info(struct aac_dev* dev) * interface. */ dev->a_ops.adapter_scsi = (dev->dac_support) - ? aac_scsi_64 + ? ((aac_get_driver_ident(dev->cardtype)->quirks & AAC_QUIRK_SCSI_32) + ? aac_scsi_32_64 + : aac_scsi_64) : aac_scsi_32; if (dev->raw_io_interface) { dev->a_ops.adapter_bounds = (dev->raw_io_64) diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 9abba8b90f70..734623af9c45 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -520,6 +520,12 @@ struct aac_driver_ident */ #define AAC_QUIRK_17SG 0x0010 +/* + * Some adapter firmware does not support 64 bit scsi passthrough + * commands. + */ +#define AAC_QUIRK_SCSI_32 0x0020 + /* * The adapter interface specs all queues to be located in the same * physically contigous block. The host structure that defines the diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index 310fd80b8c06..53d415e812ee 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -1099,7 +1099,8 @@ static int _aac_reset_adapter(struct aac_dev *aac, int forced) free_irq(aac->pdev->irq, aac); kfree(aac->fsa_dev); aac->fsa_dev = NULL; - if (aac_get_driver_ident(index)->quirks & AAC_QUIRK_31BIT) { + quirks = aac_get_driver_ident(index)->quirks; + if (quirks & AAC_QUIRK_31BIT) { if (((retval = pci_set_dma_mask(aac->pdev, DMA_31BIT_MASK))) || ((retval = pci_set_consistent_dma_mask(aac->pdev, DMA_31BIT_MASK)))) goto out; @@ -1110,7 +1111,7 @@ static int _aac_reset_adapter(struct aac_dev *aac, int forced) } if ((retval = (*(aac_get_driver_ident(index)->init))(aac))) goto out; - if (aac_get_driver_ident(index)->quirks & AAC_QUIRK_31BIT) + if (quirks & AAC_QUIRK_31BIT) if ((retval = pci_set_dma_mask(aac->pdev, DMA_32BIT_MASK))) goto out; if (jafo) { @@ -1121,7 +1122,6 @@ static int _aac_reset_adapter(struct aac_dev *aac, int forced) } } (void)aac_get_adapter_info(aac); - quirks = aac_get_driver_ident(index)->quirks; if ((quirks & AAC_QUIRK_34SG) && (host->sg_tablesize > 34)) { host->sg_tablesize = 34; host->max_sectors = (host->sg_tablesize * 8) + 112; diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 782fae83ab48..b4ad9effcf50 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -164,22 +164,22 @@ MODULE_DEVICE_TABLE(pci, aac_pci_tbl); * for the card. At that time we can remove the channels from here */ static struct aac_driver_ident aac_drivers[] = { - { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 2/Si (Iguana/PERC2Si) */ - { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Opal/PERC3Di) */ - { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Si (SlimFast/PERC3Si */ - { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Iguana FlipChip/PERC3DiF */ - { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Viper/PERC3DiV) */ - { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Lexus/PERC3DiL) */ - { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Jaguar/PERC3DiJ) */ - { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Dagger/PERC3DiD) */ - { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Boxster/PERC3DiB) */ - { aac_rx_init, "aacraid", "ADAPTEC ", "catapult ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* catapult */ - { aac_rx_init, "aacraid", "ADAPTEC ", "tomcat ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* tomcat */ - { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2120S ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2120S (Crusader) */ - { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2200S (Vulcan) */ - { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2200S (Vulcan-2m) */ - { aac_rx_init, "aacraid", "Legend ", "Legend S220 ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Legend S220 (Legend Crusader) */ - { aac_rx_init, "aacraid", "Legend ", "Legend S230 ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Legend S230 (Legend Vulcan) */ + { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 2/Si (Iguana/PERC2Si) */ + { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Opal/PERC3Di) */ + { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Si (SlimFast/PERC3Si */ + { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Iguana FlipChip/PERC3DiF */ + { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Viper/PERC3DiV) */ + { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Lexus/PERC3DiL) */ + { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Jaguar/PERC3DiJ) */ + { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Dagger/PERC3DiD) */ + { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Boxster/PERC3DiB) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "catapult ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* catapult */ + { aac_rx_init, "aacraid", "ADAPTEC ", "tomcat ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* tomcat */ + { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2120S ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2120S (Crusader) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan-2m) */ + { aac_rx_init, "aacraid", "Legend ", "Legend S220 ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S220 (Legend Crusader) */ + { aac_rx_init, "aacraid", "Legend ", "Legend S230 ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S230 (Legend Vulcan) */ { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 3230S ", 2 }, /* Adaptec 3230S (Harrier) */ { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 3240S ", 2 }, /* Adaptec 3240S (Tornado) */ @@ -224,8 +224,8 @@ static struct aac_driver_ident aac_drivers[] = { { aac_sa_init, "percraid", "DELL ", "PERCRAID ", 4, AAC_QUIRK_34SG }, /* Dell PERC2/QC */ { aac_sa_init, "hpnraid", "HP ", "NetRAID ", 4, AAC_QUIRK_34SG }, /* HP NetRAID-4M */ - { aac_rx_init, "aacraid", "DELL ", "RAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Dell Catchall */ - { aac_rx_init, "aacraid", "Legend ", "RAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Legend Catchall */ + { aac_rx_init, "aacraid", "DELL ", "RAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Dell Catchall */ + { aac_rx_init, "aacraid", "Legend ", "RAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend Catchall */ { aac_rx_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec Catch All */ { aac_rkt_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec Rocket Catch All */ { aac_nark_init, "aacraid", "ADAPTEC ", "RAID ", 2 } /* Adaptec NEMER/ARK Catch All */ @@ -420,6 +420,12 @@ static int aac_slave_configure(struct scsi_device *sdev) unsigned num_one = 0; unsigned depth; + /* + * Firmware has an individual device recovery time typically + * of 35 seconds, give us a margin. + */ + if (sdev->timeout < (45 * HZ)) + sdev->timeout = 45 * HZ; __shost_for_each_device(dev, host) { if (dev->tagged_supported && (dev->type == TYPE_DISK) && (sdev_channel(dev) == CONTAINER_CHANNEL)) -- cgit v1.2.3-59-g8ed1b From fc9b5118823e84b4ed0acddd99c1e453298e103d Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 13 Dec 2007 16:14:23 -0800 Subject: [SCSI] sgiwd93: export sgiwd93_reset() mips allmodconfig: ERROR: "sgiwd93_reset" [drivers/scsi/wd33c93.ko] undefined! Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- drivers/scsi/sgiwd93.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/sgiwd93.c b/drivers/scsi/sgiwd93.c index eef82758d047..d4ebe8c67ba9 100644 --- a/drivers/scsi/sgiwd93.c +++ b/drivers/scsi/sgiwd93.c @@ -159,6 +159,7 @@ void sgiwd93_reset(unsigned long base) udelay(50); hregs->ctrl = 0; } +EXPORT_SYMBOL_GPL(sgiwd93_reset); static inline void init_hpc_chain(struct hpc_data *hd) { -- cgit v1.2.3-59-g8ed1b From baa9aac6a15a1990e9d2d7a5648f53dfccc440ad Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 13 Dec 2007 16:14:14 -0800 Subject: [SCSI] NCR5380: minor irq handler cleanups * remove unnecessary cast * remove unnecessary use of 'irq' function arg Signed-off-by: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- drivers/scsi/NCR5380.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c index 1e9f82884f70..c1fb33292e56 100644 --- a/drivers/scsi/NCR5380.c +++ b/drivers/scsi/NCR5380.c @@ -1157,16 +1157,17 @@ static void NCR5380_main(struct work_struct *work) * Locks: takes the needed instance locks */ -static irqreturn_t NCR5380_intr(int irq, void *dev_id) +static irqreturn_t NCR5380_intr(int dummy, void *dev_id) { NCR5380_local_declare(); - struct Scsi_Host *instance = (struct Scsi_Host *)dev_id; + struct Scsi_Host *instance = dev_id; struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata; int done; unsigned char basr; unsigned long flags; - dprintk(NDEBUG_INTR, ("scsi : NCR5380 irq %d triggered\n", irq)); + dprintk(NDEBUG_INTR, ("scsi : NCR5380 irq %d triggered\n", + instance->irq)); do { done = 1; -- cgit v1.2.3-59-g8ed1b From 736f77deaf6b0bf51eaab1ea5d074adc11b8c7cd Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 13 Dec 2007 16:14:13 -0800 Subject: [SCSI] sym53c416: kill pointless irq handler loop and test - kill pointless irq handler loop to find base address, it is already passed to irq handler via Scsi_Host. - kill now-pointless !base test. Signed-off-by: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- drivers/scsi/sym53c416.c | 16 +--------------- 1 file changed, 1 insertion(+), 15 deletions(-) diff --git a/drivers/scsi/sym53c416.c b/drivers/scsi/sym53c416.c index 90cee94d9522..1f6fd1680335 100644 --- a/drivers/scsi/sym53c416.c +++ b/drivers/scsi/sym53c416.c @@ -328,27 +328,13 @@ static __inline__ unsigned int sym53c416_write(int base, unsigned char *buffer, static irqreturn_t sym53c416_intr_handle(int irq, void *dev_id) { struct Scsi_Host *dev = dev_id; - int base = 0; + int base = dev->io_port; int i; unsigned long flags = 0; unsigned char status_reg, pio_int_reg, int_reg; struct scatterlist *sg; unsigned int tot_trans = 0; - /* We search the base address of the host adapter which caused the interrupt */ - /* FIXME: should pass dev_id sensibly as hosts[i] */ - for(i = 0; i < host_index && !base; i++) - if(irq == hosts[i].irq) - base = hosts[i].base; - /* If no adapter found, we cannot handle the interrupt. Leave a message */ - /* and continue. This should never happen... */ - if(!base) - { - printk(KERN_ERR "sym53c416: No host adapter defined for interrupt %d\n", irq); - return IRQ_NONE; - } - /* Now we have the base address and we can start handling the interrupt */ - spin_lock_irqsave(dev->host_lock,flags); status_reg = inb(base + STATUS_REG); pio_int_reg = inb(base + PIO_INT_REG); -- cgit v1.2.3-59-g8ed1b From 230e886e7bd663ff2e83cdeede12d7f09b9d3711 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 13 Dec 2007 16:14:12 -0800 Subject: [SCSI] gdth: kill unneeded 'irq' argument Neither gdth_get_status() nor __gdth_interrupt() need their 'irq' argument, so remove it. [akpm@linux-foundation.org: coding style fixes] Signed-off-by: Jeff Garzik Acked-by: Boaz Harrosh Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- drivers/scsi/gdth.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c index b253b8c718d3..c82523908c2e 100644 --- a/drivers/scsi/gdth.c +++ b/drivers/scsi/gdth.c @@ -141,7 +141,7 @@ static void gdth_delay(int milliseconds); static void gdth_eval_mapping(ulong32 size, ulong32 *cyls, int *heads, int *secs); static irqreturn_t gdth_interrupt(int irq, void *dev_id); -static irqreturn_t __gdth_interrupt(gdth_ha_str *ha, int irq, +static irqreturn_t __gdth_interrupt(gdth_ha_str *ha, int gdth_from_wait, int* pIndex); static int gdth_sync_event(gdth_ha_str *ha, int service, unchar index, Scsi_Cmnd *scp); @@ -165,7 +165,6 @@ static int gdth_internal_cache_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp); static int gdth_fill_cache_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp, ushort hdrive); static void gdth_enable_int(gdth_ha_str *ha); -static unchar gdth_get_status(gdth_ha_str *ha, int irq); static int gdth_test_busy(gdth_ha_str *ha); static int gdth_get_cmd_index(gdth_ha_str *ha); static void gdth_release_event(gdth_ha_str *ha); @@ -1334,14 +1333,12 @@ static void __init gdth_enable_int(gdth_ha_str *ha) } /* return IStatus if interrupt was from this card else 0 */ -static unchar gdth_get_status(gdth_ha_str *ha, int irq) +static unchar gdth_get_status(gdth_ha_str *ha) { unchar IStatus = 0; - TRACE(("gdth_get_status() irq %d ctr_count %d\n", irq, gdth_ctr_count)); + TRACE(("gdth_get_status() irq %d ctr_count %d\n", ha->irq, gdth_ctr_count)); - if (ha->irq != (unchar)irq) /* check IRQ */ - return false; if (ha->type == GDT_EISA) IStatus = inb((ushort)ha->bmic + EDOORREG); else if (ha->type == GDT_ISA) @@ -1523,7 +1520,7 @@ static int gdth_wait(gdth_ha_str *ha, int index, ulong32 time) return 1; /* no wait required */ do { - __gdth_interrupt(ha, (int)ha->irq, true, &wait_index); + __gdth_interrupt(ha, true, &wait_index); if (wait_index == index) { answer_found = TRUE; break; @@ -3036,7 +3033,7 @@ static void gdth_clear_events(void) /* SCSI interface functions */ -static irqreturn_t __gdth_interrupt(gdth_ha_str *ha, int irq, +static irqreturn_t __gdth_interrupt(gdth_ha_str *ha, int gdth_from_wait, int* pIndex) { gdt6m_dpram_str __iomem *dp6m_ptr = NULL; @@ -3054,7 +3051,7 @@ static irqreturn_t __gdth_interrupt(gdth_ha_str *ha, int irq, int act_int_coal = 0; #endif - TRACE(("gdth_interrupt() IRQ %d\n",irq)); + TRACE(("gdth_interrupt() IRQ %d\n", ha->irq)); /* if polling and not from gdth_wait() -> return */ if (gdth_polling) { @@ -3067,7 +3064,8 @@ static irqreturn_t __gdth_interrupt(gdth_ha_str *ha, int irq, spin_lock_irqsave(&ha->smp_lock, flags); /* search controller */ - if (0 == (IStatus = gdth_get_status(ha, irq))) { + IStatus = gdth_get_status(ha); + if (IStatus == 0) { /* spurious interrupt */ if (!gdth_polling) spin_unlock_irqrestore(&ha->smp_lock, flags); @@ -3294,9 +3292,9 @@ static irqreturn_t __gdth_interrupt(gdth_ha_str *ha, int irq, static irqreturn_t gdth_interrupt(int irq, void *dev_id) { - gdth_ha_str *ha = (gdth_ha_str *)dev_id; + gdth_ha_str *ha = dev_id; - return __gdth_interrupt(ha, irq, false, NULL); + return __gdth_interrupt(ha, false, NULL); } static int gdth_sync_event(gdth_ha_str *ha, int service, unchar index, -- cgit v1.2.3-59-g8ed1b From b7d68ca3f055b90bb782bcfcf535f54cead7d7db Mon Sep 17 00:00:00 2001 From: Denis Cheng Date: Thu, 13 Dec 2007 16:14:27 -0800 Subject: [SCSI] ipr: use LIST_HEAD instead of LIST_HEAD_INIT Signed-off-by: Denis Cheng Acked-by: Brian King Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- drivers/scsi/ipr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 0841df01bc19..9018ee851a8a 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -84,7 +84,7 @@ /* * Global Data */ -static struct list_head ipr_ioa_head = LIST_HEAD_INIT(ipr_ioa_head); +static LIST_HEAD(ipr_ioa_head); static unsigned int ipr_log_level = IPR_DEFAULT_LOG_LEVEL; static unsigned int ipr_max_speed = 1; static int ipr_testmode = 0; -- cgit v1.2.3-59-g8ed1b From 8ae732a91df051aba6820068a47b631a06599d84 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 7 Dec 2007 22:36:23 +0900 Subject: [SCSI] make pcmcia directory use obj-y|m instead of subdir-y|m subdir-y|m isn't supposed to contain modules or built-in components. Change subdir-$(CONFIG_PCMCIA) to obj-$(CONFIG_PCMCIA). Signed-off-by: Tejun Heo Acked-by: Sam Ravnborg Signed-off-by: James Bottomley --- drivers/scsi/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index b5441f5a48fc..93e1428d03fc 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -17,7 +17,7 @@ CFLAGS_aha152x.o = -DAHA152X_STAT -DAUTOCONF CFLAGS_gdth.o = # -DDEBUG_GDTH=2 -D__SERIAL__ -D__COM2__ -DGDTH_STATISTICS -subdir-$(CONFIG_PCMCIA) += pcmcia +obj-$(CONFIG_PCMCIA) += pcmcia/ obj-$(CONFIG_SCSI) += scsi_mod.o obj-$(CONFIG_SCSI_TGT) += scsi_tgt.o -- cgit v1.2.3-59-g8ed1b From 843c0a8a76078cf961b244b839683d0667313740 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 13 Dec 2007 12:43:20 -0600 Subject: [SCSI] libiscsi, iscsi_tcp: add device support This patch adds logical unit reset support. This should work for ib_iser, but I have not finished testing that driver so it is not hooked in yet. This patch also temporarily reverts the iscsi_tcp r2t write out patch. That code is completely rewritten in this patchset. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/infiniband/ulp/iser/iscsi_iser.c | 6 - drivers/scsi/iscsi_tcp.c | 151 +++++----- drivers/scsi/iscsi_tcp.h | 34 +-- drivers/scsi/libiscsi.c | 494 ++++++++++++++++++------------- drivers/scsi/scsi_transport_iscsi.c | 4 +- include/scsi/iscsi_if.h | 2 + include/scsi/iscsi_proto.h | 2 + include/scsi/libiscsi.h | 25 +- 8 files changed, 396 insertions(+), 322 deletions(-) diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c index bad8dacafd10..2eadb6d0ad8b 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.c +++ b/drivers/infiniband/ulp/iser/iscsi_iser.c @@ -220,12 +220,6 @@ iscsi_iser_ctask_xmit(struct iscsi_conn *conn, debug_scsi("ctask deq [cid %d itt 0x%x]\n", conn->id, ctask->itt); - /* - * serialize with TMF AbortTask - */ - if (ctask->mtask) - return error; - /* Send the cmd PDU */ if (!iser_ctask->command_sent) { error = iser_send_command(conn, ctask); diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 57ce2251abc8..4b226b88b68a 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -197,7 +197,7 @@ iscsi_tcp_cleanup_ctask(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) if (unlikely(!sc)) return; - tcp_ctask->xmstate = XMSTATE_VALUE_IDLE; + tcp_ctask->xmstate = XMSTATE_IDLE; tcp_ctask->r2t = NULL; } @@ -369,8 +369,7 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) spin_lock(&session->lock); iscsi_update_cmdsn(session, (struct iscsi_nopin*)rhdr); - if (!ctask->sc || ctask->mtask || - session->state != ISCSI_STATE_LOGGED_IN) { + if (!ctask->sc || session->state != ISCSI_STATE_LOGGED_IN) { printk(KERN_INFO "iscsi_tcp: dropping R2T itt %d in " "recovery...\n", ctask->itt); spin_unlock(&session->lock); @@ -409,11 +408,10 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) tcp_ctask->exp_datasn = r2tsn + 1; __kfifo_put(tcp_ctask->r2tqueue, (void*)&r2t, sizeof(void*)); - set_bit(XMSTATE_BIT_SOL_HDR_INIT, &tcp_ctask->xmstate); - list_move_tail(&ctask->running, &conn->xmitqueue); - - scsi_queue_work(session->host, &conn->xmitwork); + tcp_ctask->xmstate |= XMSTATE_SOL_HDR_INIT; conn->r2t_pdus_cnt++; + + iscsi_requeue_ctask(ctask); spin_unlock(&session->lock); return 0; @@ -1254,7 +1252,7 @@ static void iscsi_set_padding(struct iscsi_tcp_cmd_task *tcp_ctask, tcp_ctask->pad_count = ISCSI_PAD_LEN - tcp_ctask->pad_count; debug_scsi("write padding %d bytes\n", tcp_ctask->pad_count); - set_bit(XMSTATE_BIT_W_PAD, &tcp_ctask->xmstate); + tcp_ctask->xmstate |= XMSTATE_W_PAD; } /** @@ -1269,7 +1267,7 @@ iscsi_tcp_cmd_init(struct iscsi_cmd_task *ctask) struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; BUG_ON(__kfifo_len(tcp_ctask->r2tqueue)); - tcp_ctask->xmstate = 1 << XMSTATE_BIT_CMD_HDR_INIT; + tcp_ctask->xmstate = XMSTATE_CMD_HDR_INIT; } /** @@ -1283,10 +1281,10 @@ iscsi_tcp_cmd_init(struct iscsi_cmd_task *ctask) * xmit. * * Management xmit state machine consists of these states: - * XMSTATE_BIT_IMM_HDR_INIT - calculate digest of PDU Header - * XMSTATE_BIT_IMM_HDR - PDU Header xmit in progress - * XMSTATE_BIT_IMM_DATA - PDU Data xmit in progress - * XMSTATE_VALUE_IDLE - management PDU is done + * XMSTATE_IMM_HDR_INIT - calculate digest of PDU Header + * XMSTATE_IMM_HDR - PDU Header xmit in progress + * XMSTATE_IMM_DATA - PDU Data xmit in progress + * XMSTATE_IDLE - management PDU is done **/ static int iscsi_tcp_mtask_xmit(struct iscsi_conn *conn, struct iscsi_mgmt_task *mtask) @@ -1297,12 +1295,12 @@ iscsi_tcp_mtask_xmit(struct iscsi_conn *conn, struct iscsi_mgmt_task *mtask) debug_scsi("mtask deq [cid %d state %x itt 0x%x]\n", conn->id, tcp_mtask->xmstate, mtask->itt); - if (test_bit(XMSTATE_BIT_IMM_HDR_INIT, &tcp_mtask->xmstate)) { + if (tcp_mtask->xmstate & XMSTATE_IMM_HDR_INIT) { iscsi_buf_init_iov(&tcp_mtask->headbuf, (char*)mtask->hdr, sizeof(struct iscsi_hdr)); if (mtask->data_count) { - set_bit(XMSTATE_BIT_IMM_DATA, &tcp_mtask->xmstate); + tcp_mtask->xmstate |= XMSTATE_IMM_DATA; iscsi_buf_init_iov(&tcp_mtask->sendbuf, (char*)mtask->data, mtask->data_count); @@ -1315,20 +1313,21 @@ iscsi_tcp_mtask_xmit(struct iscsi_conn *conn, struct iscsi_mgmt_task *mtask) (u8*)tcp_mtask->hdrext); tcp_mtask->sent = 0; - clear_bit(XMSTATE_BIT_IMM_HDR_INIT, &tcp_mtask->xmstate); - set_bit(XMSTATE_BIT_IMM_HDR, &tcp_mtask->xmstate); + tcp_mtask->xmstate &= ~XMSTATE_IMM_HDR_INIT; + tcp_mtask->xmstate |= XMSTATE_IMM_HDR; } - if (test_bit(XMSTATE_BIT_IMM_HDR, &tcp_mtask->xmstate)) { + if (tcp_mtask->xmstate & XMSTATE_IMM_HDR) { rc = iscsi_sendhdr(conn, &tcp_mtask->headbuf, mtask->data_count); if (rc) return rc; - clear_bit(XMSTATE_BIT_IMM_HDR, &tcp_mtask->xmstate); + tcp_mtask->xmstate &= ~XMSTATE_IMM_HDR; } - if (test_and_clear_bit(XMSTATE_BIT_IMM_DATA, &tcp_mtask->xmstate)) { + if (tcp_mtask->xmstate & XMSTATE_IMM_DATA) { BUG_ON(!mtask->data_count); + tcp_mtask->xmstate &= ~XMSTATE_IMM_DATA; /* FIXME: implement. * Virtual buffer could be spreaded across multiple pages... */ @@ -1338,13 +1337,13 @@ iscsi_tcp_mtask_xmit(struct iscsi_conn *conn, struct iscsi_mgmt_task *mtask) rc = iscsi_sendpage(conn, &tcp_mtask->sendbuf, &mtask->data_count, &tcp_mtask->sent); if (rc) { - set_bit(XMSTATE_BIT_IMM_DATA, &tcp_mtask->xmstate); + tcp_mtask->xmstate |= XMSTATE_IMM_DATA; return rc; } } while (mtask->data_count); } - BUG_ON(tcp_mtask->xmstate != XMSTATE_VALUE_IDLE); + BUG_ON(tcp_mtask->xmstate != XMSTATE_IDLE); if (mtask->hdr->itt == RESERVED_ITT) { struct iscsi_session *session = conn->session; @@ -1364,7 +1363,7 @@ iscsi_send_cmd_hdr(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; int rc = 0; - if (test_bit(XMSTATE_BIT_CMD_HDR_INIT, &tcp_ctask->xmstate)) { + if (tcp_ctask->xmstate & XMSTATE_CMD_HDR_INIT) { tcp_ctask->sent = 0; tcp_ctask->sg_count = 0; tcp_ctask->exp_datasn = 0; @@ -1389,21 +1388,21 @@ iscsi_send_cmd_hdr(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) if (conn->hdrdgst_en) iscsi_hdr_digest(conn, &tcp_ctask->headbuf, (u8*)tcp_ctask->hdrext); - clear_bit(XMSTATE_BIT_CMD_HDR_INIT, &tcp_ctask->xmstate); - set_bit(XMSTATE_BIT_CMD_HDR_XMIT, &tcp_ctask->xmstate); + tcp_ctask->xmstate &= ~XMSTATE_CMD_HDR_INIT; + tcp_ctask->xmstate |= XMSTATE_CMD_HDR_XMIT; } - if (test_bit(XMSTATE_BIT_CMD_HDR_XMIT, &tcp_ctask->xmstate)) { + if (tcp_ctask->xmstate & XMSTATE_CMD_HDR_XMIT) { rc = iscsi_sendhdr(conn, &tcp_ctask->headbuf, ctask->imm_count); if (rc) return rc; - clear_bit(XMSTATE_BIT_CMD_HDR_XMIT, &tcp_ctask->xmstate); + tcp_ctask->xmstate &= ~XMSTATE_CMD_HDR_XMIT; if (sc->sc_data_direction != DMA_TO_DEVICE) return 0; if (ctask->imm_count) { - set_bit(XMSTATE_BIT_IMM_DATA, &tcp_ctask->xmstate); + tcp_ctask->xmstate |= XMSTATE_IMM_DATA; iscsi_set_padding(tcp_ctask, ctask->imm_count); if (ctask->conn->datadgst_en) { @@ -1413,10 +1412,9 @@ iscsi_send_cmd_hdr(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) } } - if (ctask->unsol_count) { - set_bit(XMSTATE_BIT_UNS_HDR, &tcp_ctask->xmstate); - set_bit(XMSTATE_BIT_UNS_INIT, &tcp_ctask->xmstate); - } + if (ctask->unsol_count) + tcp_ctask->xmstate |= + XMSTATE_UNS_HDR | XMSTATE_UNS_INIT; } return rc; } @@ -1428,25 +1426,25 @@ iscsi_send_padding(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) struct iscsi_tcp_conn *tcp_conn = conn->dd_data; int sent = 0, rc; - if (test_bit(XMSTATE_BIT_W_PAD, &tcp_ctask->xmstate)) { + if (tcp_ctask->xmstate & XMSTATE_W_PAD) { iscsi_buf_init_iov(&tcp_ctask->sendbuf, (char*)&tcp_ctask->pad, tcp_ctask->pad_count); if (conn->datadgst_en) crypto_hash_update(&tcp_conn->tx_hash, &tcp_ctask->sendbuf.sg, tcp_ctask->sendbuf.sg.length); - } else if (!test_bit(XMSTATE_BIT_W_RESEND_PAD, &tcp_ctask->xmstate)) + } else if (!(tcp_ctask->xmstate & XMSTATE_W_RESEND_PAD)) return 0; - clear_bit(XMSTATE_BIT_W_PAD, &tcp_ctask->xmstate); - clear_bit(XMSTATE_BIT_W_RESEND_PAD, &tcp_ctask->xmstate); + tcp_ctask->xmstate &= ~XMSTATE_W_PAD; + tcp_ctask->xmstate &= ~XMSTATE_W_RESEND_PAD; debug_scsi("sending %d pad bytes for itt 0x%x\n", tcp_ctask->pad_count, ctask->itt); rc = iscsi_sendpage(conn, &tcp_ctask->sendbuf, &tcp_ctask->pad_count, &sent); if (rc) { debug_scsi("padding send failed %d\n", rc); - set_bit(XMSTATE_BIT_W_RESEND_PAD, &tcp_ctask->xmstate); + tcp_ctask->xmstate |= XMSTATE_W_RESEND_PAD; } return rc; } @@ -1465,11 +1463,11 @@ iscsi_send_digest(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask, tcp_ctask = ctask->dd_data; tcp_conn = conn->dd_data; - if (!test_bit(XMSTATE_BIT_W_RESEND_DATA_DIGEST, &tcp_ctask->xmstate)) { + if (!(tcp_ctask->xmstate & XMSTATE_W_RESEND_DATA_DIGEST)) { crypto_hash_final(&tcp_conn->tx_hash, (u8*)digest); iscsi_buf_init_iov(buf, (char*)digest, 4); } - clear_bit(XMSTATE_BIT_W_RESEND_DATA_DIGEST, &tcp_ctask->xmstate); + tcp_ctask->xmstate &= ~XMSTATE_W_RESEND_DATA_DIGEST; rc = iscsi_sendpage(conn, buf, &tcp_ctask->digest_count, &sent); if (!rc) @@ -1478,7 +1476,7 @@ iscsi_send_digest(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask, else { debug_scsi("sending digest 0x%x failed for itt 0x%x!\n", *digest, ctask->itt); - set_bit(XMSTATE_BIT_W_RESEND_DATA_DIGEST, &tcp_ctask->xmstate); + tcp_ctask->xmstate |= XMSTATE_W_RESEND_DATA_DIGEST; } return rc; } @@ -1526,8 +1524,8 @@ iscsi_send_unsol_hdr(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) struct iscsi_data_task *dtask; int rc; - set_bit(XMSTATE_BIT_UNS_DATA, &tcp_ctask->xmstate); - if (test_bit(XMSTATE_BIT_UNS_INIT, &tcp_ctask->xmstate)) { + tcp_ctask->xmstate |= XMSTATE_UNS_DATA; + if (tcp_ctask->xmstate & XMSTATE_UNS_INIT) { dtask = &tcp_ctask->unsol_dtask; iscsi_prep_unsolicit_data_pdu(ctask, &dtask->hdr); @@ -1537,14 +1535,14 @@ iscsi_send_unsol_hdr(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) iscsi_hdr_digest(conn, &tcp_ctask->headbuf, (u8*)dtask->hdrext); - clear_bit(XMSTATE_BIT_UNS_INIT, &tcp_ctask->xmstate); + tcp_ctask->xmstate &= ~XMSTATE_UNS_INIT; iscsi_set_padding(tcp_ctask, ctask->data_count); } rc = iscsi_sendhdr(conn, &tcp_ctask->headbuf, ctask->data_count); if (rc) { - clear_bit(XMSTATE_BIT_UNS_DATA, &tcp_ctask->xmstate); - set_bit(XMSTATE_BIT_UNS_HDR, &tcp_ctask->xmstate); + tcp_ctask->xmstate &= ~XMSTATE_UNS_DATA; + tcp_ctask->xmstate |= XMSTATE_UNS_HDR; return rc; } @@ -1565,15 +1563,16 @@ iscsi_send_unsol_pdu(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; int rc; - if (test_and_clear_bit(XMSTATE_BIT_UNS_HDR, &tcp_ctask->xmstate)) { + if (tcp_ctask->xmstate & XMSTATE_UNS_HDR) { BUG_ON(!ctask->unsol_count); + tcp_ctask->xmstate &= ~XMSTATE_UNS_HDR; send_hdr: rc = iscsi_send_unsol_hdr(conn, ctask); if (rc) return rc; } - if (test_bit(XMSTATE_BIT_UNS_DATA, &tcp_ctask->xmstate)) { + if (tcp_ctask->xmstate & XMSTATE_UNS_DATA) { struct iscsi_data_task *dtask = &tcp_ctask->unsol_dtask; int start = tcp_ctask->sent; @@ -1583,14 +1582,14 @@ send_hdr: ctask->unsol_count -= tcp_ctask->sent - start; if (rc) return rc; - clear_bit(XMSTATE_BIT_UNS_DATA, &tcp_ctask->xmstate); + tcp_ctask->xmstate &= ~XMSTATE_UNS_DATA; /* * Done with the Data-Out. Next, check if we need * to send another unsolicited Data-Out. */ if (ctask->unsol_count) { debug_scsi("sending more uns\n"); - set_bit(XMSTATE_BIT_UNS_INIT, &tcp_ctask->xmstate); + tcp_ctask->xmstate |= XMSTATE_UNS_INIT; goto send_hdr; } } @@ -1606,7 +1605,7 @@ static int iscsi_send_sol_pdu(struct iscsi_conn *conn, struct iscsi_data_task *dtask; int left, rc; - if (test_bit(XMSTATE_BIT_SOL_HDR_INIT, &tcp_ctask->xmstate)) { + if (tcp_ctask->xmstate & XMSTATE_SOL_HDR_INIT) { if (!tcp_ctask->r2t) { spin_lock_bh(&session->lock); __kfifo_get(tcp_ctask->r2tqueue, (void*)&tcp_ctask->r2t, @@ -1620,19 +1619,19 @@ send_hdr: if (conn->hdrdgst_en) iscsi_hdr_digest(conn, &r2t->headbuf, (u8*)dtask->hdrext); - clear_bit(XMSTATE_BIT_SOL_HDR_INIT, &tcp_ctask->xmstate); - set_bit(XMSTATE_BIT_SOL_HDR, &tcp_ctask->xmstate); + tcp_ctask->xmstate &= ~XMSTATE_SOL_HDR_INIT; + tcp_ctask->xmstate |= XMSTATE_SOL_HDR; } - if (test_bit(XMSTATE_BIT_SOL_HDR, &tcp_ctask->xmstate)) { + if (tcp_ctask->xmstate & XMSTATE_SOL_HDR) { r2t = tcp_ctask->r2t; dtask = &r2t->dtask; rc = iscsi_sendhdr(conn, &r2t->headbuf, r2t->data_count); if (rc) return rc; - clear_bit(XMSTATE_BIT_SOL_HDR, &tcp_ctask->xmstate); - set_bit(XMSTATE_BIT_SOL_DATA, &tcp_ctask->xmstate); + tcp_ctask->xmstate &= ~XMSTATE_SOL_HDR; + tcp_ctask->xmstate |= XMSTATE_SOL_DATA; if (conn->datadgst_en) { iscsi_data_digest_init(conn->dd_data, tcp_ctask); @@ -1645,7 +1644,7 @@ send_hdr: r2t->sent); } - if (test_bit(XMSTATE_BIT_SOL_DATA, &tcp_ctask->xmstate)) { + if (tcp_ctask->xmstate & XMSTATE_SOL_DATA) { r2t = tcp_ctask->r2t; dtask = &r2t->dtask; @@ -1654,7 +1653,7 @@ send_hdr: &dtask->digestbuf, &dtask->digest); if (rc) return rc; - clear_bit(XMSTATE_BIT_SOL_DATA, &tcp_ctask->xmstate); + tcp_ctask->xmstate &= ~XMSTATE_SOL_DATA; /* * Done with this Data-Out. Next, check if we have @@ -1699,32 +1698,32 @@ send_hdr: * xmit stages. * *iscsi_send_cmd_hdr() - * XMSTATE_BIT_CMD_HDR_INIT - prepare Header and Data buffers Calculate - * Header Digest - * XMSTATE_BIT_CMD_HDR_XMIT - Transmit header in progress + * XMSTATE_CMD_HDR_INIT - prepare Header and Data buffers Calculate + * Header Digest + * XMSTATE_CMD_HDR_XMIT - Transmit header in progress * *iscsi_send_padding - * XMSTATE_BIT_W_PAD - Prepare and send pading - * XMSTATE_BIT_W_RESEND_PAD - retry send pading + * XMSTATE_W_PAD - Prepare and send pading + * XMSTATE_W_RESEND_PAD - retry send pading * *iscsi_send_digest - * XMSTATE_BIT_W_RESEND_DATA_DIGEST - Finalize and send Data Digest - * XMSTATE_BIT_W_RESEND_DATA_DIGEST - retry sending digest + * XMSTATE_W_RESEND_DATA_DIGEST - Finalize and send Data Digest + * XMSTATE_W_RESEND_DATA_DIGEST - retry sending digest * *iscsi_send_unsol_hdr - * XMSTATE_BIT_UNS_INIT - prepare un-solicit data header and digest - * XMSTATE_BIT_UNS_HDR - send un-solicit header + * XMSTATE_UNS_INIT - prepare un-solicit data header and digest + * XMSTATE_UNS_HDR - send un-solicit header * *iscsi_send_unsol_pdu - * XMSTATE_BIT_UNS_DATA - send un-solicit data in progress + * XMSTATE_UNS_DATA - send un-solicit data in progress * *iscsi_send_sol_pdu - * XMSTATE_BIT_SOL_HDR_INIT - solicit data header and digest initialize - * XMSTATE_BIT_SOL_HDR - send solicit header - * XMSTATE_BIT_SOL_DATA - send solicit data + * XMSTATE_SOL_HDR_INIT - solicit data header and digest initialize + * XMSTATE_SOL_HDR - send solicit header + * XMSTATE_SOL_DATA - send solicit data * *iscsi_tcp_ctask_xmit - * XMSTATE_BIT_IMM_DATA - xmit managment data (??) + * XMSTATE_IMM_DATA - xmit managment data (??) **/ static int iscsi_tcp_ctask_xmit(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) @@ -1741,13 +1740,13 @@ iscsi_tcp_ctask_xmit(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) if (ctask->sc->sc_data_direction != DMA_TO_DEVICE) return 0; - if (test_bit(XMSTATE_BIT_IMM_DATA, &tcp_ctask->xmstate)) { + if (tcp_ctask->xmstate & XMSTATE_IMM_DATA) { rc = iscsi_send_data(ctask, &tcp_ctask->sendbuf, &tcp_ctask->sg, &tcp_ctask->sent, &ctask->imm_count, &tcp_ctask->immbuf, &tcp_ctask->immdigest); if (rc) return rc; - clear_bit(XMSTATE_BIT_IMM_DATA, &tcp_ctask->xmstate); + tcp_ctask->xmstate &= ~XMSTATE_IMM_DATA; } rc = iscsi_send_unsol_pdu(conn, ctask); @@ -1980,7 +1979,7 @@ static void iscsi_tcp_mgmt_init(struct iscsi_conn *conn, struct iscsi_mgmt_task *mtask) { struct iscsi_tcp_mgmt_task *tcp_mtask = mtask->dd_data; - tcp_mtask->xmstate = 1 << XMSTATE_BIT_IMM_HDR_INIT; + tcp_mtask->xmstate = XMSTATE_IMM_HDR_INIT; } static int @@ -2226,6 +2225,7 @@ static struct scsi_host_template iscsi_sht = { .max_sectors = 0xFFFF, .cmd_per_lun = ISCSI_DEF_CMD_PER_LUN, .eh_abort_handler = iscsi_eh_abort, + .eh_device_reset_handler= iscsi_eh_device_reset, .eh_host_reset_handler = iscsi_eh_host_reset, .use_clustering = DISABLE_CLUSTERING, .slave_configure = iscsi_tcp_slave_configure, @@ -2257,7 +2257,8 @@ static struct iscsi_transport iscsi_tcp_transport = { ISCSI_PERSISTENT_ADDRESS | ISCSI_TARGET_NAME | ISCSI_TPGT | ISCSI_USERNAME | ISCSI_PASSWORD | - ISCSI_USERNAME_IN | ISCSI_PASSWORD_IN, + ISCSI_USERNAME_IN | ISCSI_PASSWORD_IN | + ISCSI_FAST_ABORT, .host_param_mask = ISCSI_HOST_HWADDRESS | ISCSI_HOST_IPADDRESS | ISCSI_HOST_INITIATOR_NAME | ISCSI_HOST_NETDEV_NAME, diff --git a/drivers/scsi/iscsi_tcp.h b/drivers/scsi/iscsi_tcp.h index 68c36cc8997e..7eba44df0a7f 100644 --- a/drivers/scsi/iscsi_tcp.h +++ b/drivers/scsi/iscsi_tcp.h @@ -32,21 +32,21 @@ #define IN_PROGRESS_PAD_RECV 0x4 /* xmit state machine */ -#define XMSTATE_VALUE_IDLE 0 -#define XMSTATE_BIT_CMD_HDR_INIT 0 -#define XMSTATE_BIT_CMD_HDR_XMIT 1 -#define XMSTATE_BIT_IMM_HDR 2 -#define XMSTATE_BIT_IMM_DATA 3 -#define XMSTATE_BIT_UNS_INIT 4 -#define XMSTATE_BIT_UNS_HDR 5 -#define XMSTATE_BIT_UNS_DATA 6 -#define XMSTATE_BIT_SOL_HDR 7 -#define XMSTATE_BIT_SOL_DATA 8 -#define XMSTATE_BIT_W_PAD 9 -#define XMSTATE_BIT_W_RESEND_PAD 10 -#define XMSTATE_BIT_W_RESEND_DATA_DIGEST 11 -#define XMSTATE_BIT_IMM_HDR_INIT 12 -#define XMSTATE_BIT_SOL_HDR_INIT 13 +#define XMSTATE_IDLE 0x0 +#define XMSTATE_CMD_HDR_INIT 0x1 +#define XMSTATE_CMD_HDR_XMIT 0x2 +#define XMSTATE_IMM_HDR 0x4 +#define XMSTATE_IMM_DATA 0x8 +#define XMSTATE_UNS_INIT 0x10 +#define XMSTATE_UNS_HDR 0x20 +#define XMSTATE_UNS_DATA 0x40 +#define XMSTATE_SOL_HDR 0x80 +#define XMSTATE_SOL_DATA 0x100 +#define XMSTATE_W_PAD 0x200 +#define XMSTATE_W_RESEND_PAD 0x400 +#define XMSTATE_W_RESEND_DATA_DIGEST 0x800 +#define XMSTATE_IMM_HDR_INIT 0x1000 +#define XMSTATE_SOL_HDR_INIT 0x2000 #define ISCSI_PAD_LEN 4 #define ISCSI_SG_TABLESIZE SG_ALL @@ -122,7 +122,7 @@ struct iscsi_data_task { struct iscsi_tcp_mgmt_task { struct iscsi_hdr hdr; char hdrext[sizeof(__u32)]; /* Header-Digest */ - unsigned long xmstate; /* mgmt xmit progress */ + int xmstate; /* mgmt xmit progress */ struct iscsi_buf headbuf; /* header buffer */ struct iscsi_buf sendbuf; /* in progress buffer */ int sent; @@ -150,7 +150,7 @@ struct iscsi_tcp_cmd_task { int pad_count; /* padded bytes */ struct iscsi_buf headbuf; /* header buf (xmit) */ struct iscsi_buf sendbuf; /* in progress buffer*/ - unsigned long xmstate; /* xmit xtate machine */ + int xmstate; /* xmit xtate machine */ int sent; struct scatterlist *sg; /* per-cmd SG list */ struct scatterlist *bad_sg; /* assert statement */ diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 8b57af5baaec..176458f35316 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -86,7 +86,7 @@ iscsi_update_cmdsn(struct iscsi_session *session, struct iscsi_nopin *hdr) * xmit thread */ if (!list_empty(&session->leadconn->xmitqueue) || - __kfifo_len(session->leadconn->mgmtqueue)) + !list_empty(&session->leadconn->mgmtqueue)) scsi_queue_work(session->host, &session->leadconn->xmitwork); } @@ -318,15 +318,15 @@ static void iscsi_tmf_rsp(struct iscsi_conn *conn, struct iscsi_hdr *hdr) conn->exp_statsn = be32_to_cpu(hdr->statsn) + 1; conn->tmfrsp_pdus_cnt++; - if (conn->tmabort_state != TMABORT_INITIAL) + if (conn->tmf_state != TMF_QUEUED) return; if (tmf->response == ISCSI_TMF_RSP_COMPLETE) - conn->tmabort_state = TMABORT_SUCCESS; + conn->tmf_state = TMF_SUCCESS; else if (tmf->response == ISCSI_TMF_RSP_NO_TASK) - conn->tmabort_state = TMABORT_NOT_FOUND; + conn->tmf_state = TMF_NOT_FOUND; else - conn->tmabort_state = TMABORT_FAILED; + conn->tmf_state = TMF_FAILED; wake_up(&conn->ehwait); } @@ -429,7 +429,7 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, */ if (iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen)) rc = ISCSI_ERR_CONN_FAILED; - list_del(&mtask->running); + list_del_init(&mtask->running); if (conn->login_mtask != mtask) __kfifo_put(session->mgmtpool.queue, (void*)&mtask, sizeof(void*)); @@ -451,10 +451,9 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, if (iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen)) rc = ISCSI_ERR_CONN_FAILED; - list_del(&mtask->running); - if (conn->login_mtask != mtask) - __kfifo_put(session->mgmtpool.queue, - (void*)&mtask, sizeof(void*)); + list_del_init(&mtask->running); + __kfifo_put(session->mgmtpool.queue, + (void*)&mtask, sizeof(void*)); break; default: rc = ISCSI_ERR_BAD_OPCODE; @@ -609,7 +608,8 @@ static void iscsi_prep_mtask(struct iscsi_conn *conn, session->tt->init_mgmt_task(conn, mtask); debug_scsi("mgmtpdu [op 0x%x hdr->itt 0x%x datalen %d]\n", - hdr->opcode, hdr->itt, mtask->data_count); + hdr->opcode & ISCSI_OPCODE_MASK, hdr->itt, + mtask->data_count); } static int iscsi_xmit_mtask(struct iscsi_conn *conn) @@ -658,27 +658,35 @@ static int iscsi_check_cmdsn_window_closed(struct iscsi_conn *conn) static int iscsi_xmit_ctask(struct iscsi_conn *conn) { struct iscsi_cmd_task *ctask = conn->ctask; - int rc = 0; - - /* - * serialize with TMF AbortTask - */ - if (ctask->state == ISCSI_TASK_ABORTING) - goto done; + int rc; __iscsi_get_ctask(ctask); spin_unlock_bh(&conn->session->lock); rc = conn->session->tt->xmit_cmd_task(conn, ctask); spin_lock_bh(&conn->session->lock); __iscsi_put_ctask(ctask); - -done: if (!rc) /* done with this ctask */ conn->ctask = NULL; return rc; } +/** + * iscsi_requeue_ctask - requeue ctask to run from session workqueue + * @ctask: ctask to requeue + * + * LLDs that need to run a ctask from the session workqueue should call + * this. The session lock must be held. + */ +void iscsi_requeue_ctask(struct iscsi_cmd_task *ctask) +{ + struct iscsi_conn *conn = ctask->conn; + + list_move_tail(&ctask->running, &conn->requeue); + scsi_queue_work(conn->session->host, &conn->xmitwork); +} +EXPORT_SYMBOL_GPL(iscsi_requeue_ctask); + /** * iscsi_data_xmit - xmit any command into the scheduled connection * @conn: iscsi connection @@ -717,36 +725,27 @@ static int iscsi_data_xmit(struct iscsi_conn *conn) * overflow us with nop-ins */ check_mgmt: - while (__kfifo_get(conn->mgmtqueue, (void*)&conn->mtask, - sizeof(void*))) { + while (!list_empty(&conn->mgmtqueue)) { + conn->mtask = list_entry(conn->mgmtqueue.next, + struct iscsi_mgmt_task, running); iscsi_prep_mtask(conn, conn->mtask); - list_add_tail(&conn->mtask->running, &conn->mgmt_run_list); + list_move_tail(conn->mgmtqueue.next, &conn->mgmt_run_list); rc = iscsi_xmit_mtask(conn); if (rc) goto again; } - /* process command queue */ + /* process pending command queue */ while (!list_empty(&conn->xmitqueue)) { - /* - * iscsi tcp may readd the task to the xmitqueue to send - * write data - */ + if (conn->tmf_state == TMF_QUEUED) + break; + conn->ctask = list_entry(conn->xmitqueue.next, struct iscsi_cmd_task, running); - switch (conn->ctask->state) { - case ISCSI_TASK_ABORTING: - break; - case ISCSI_TASK_PENDING: - iscsi_prep_scsi_cmd_pdu(conn->ctask); - conn->session->tt->init_cmd_task(conn->ctask); - /* fall through */ - default: - conn->ctask->state = ISCSI_TASK_RUNNING; - break; - } + iscsi_prep_scsi_cmd_pdu(conn->ctask); + conn->session->tt->init_cmd_task(conn->ctask); + conn->ctask->state = ISCSI_TASK_RUNNING; list_move_tail(conn->xmitqueue.next, &conn->run_list); - rc = iscsi_xmit_ctask(conn); if (rc) goto again; @@ -755,7 +754,22 @@ check_mgmt: * we need to check the mgmt queue for nops that need to * be sent to aviod starvation */ - if (__kfifo_len(conn->mgmtqueue)) + if (!list_empty(&conn->mgmtqueue)) + goto check_mgmt; + } + + while (!list_empty(&conn->requeue)) { + if (conn->session->fast_abort && conn->tmf_state != TMF_INITIAL) + break; + + conn->ctask = list_entry(conn->requeue.next, + struct iscsi_cmd_task, running); + conn->ctask->state = ISCSI_TASK_RUNNING; + list_move_tail(conn->requeue.next, &conn->run_list); + rc = iscsi_xmit_ctask(conn); + if (rc) + goto again; + if (!list_empty(&conn->mgmtqueue)) goto check_mgmt; } spin_unlock_bh(&conn->session->lock); @@ -859,7 +873,6 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) atomic_set(&ctask->refcount, 1); ctask->state = ISCSI_TASK_PENDING; - ctask->mtask = NULL; ctask->conn = conn; ctask->sc = sc; INIT_LIST_HEAD(&ctask->running); @@ -929,9 +942,9 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, } else mtask->data_count = 0; - INIT_LIST_HEAD(&mtask->running); memcpy(mtask->hdr, hdr, sizeof(struct iscsi_hdr)); - __kfifo_put(conn->mgmtqueue, (void*)&mtask, sizeof(void*)); + INIT_LIST_HEAD(&mtask->running); + list_add_tail(&mtask->running, &conn->mgmtqueue); return mtask; } @@ -954,13 +967,12 @@ EXPORT_SYMBOL_GPL(iscsi_conn_send_pdu); void iscsi_session_recovery_timedout(struct iscsi_cls_session *cls_session) { struct iscsi_session *session = class_to_transport_session(cls_session); - struct iscsi_conn *conn = session->leadconn; spin_lock_bh(&session->lock); if (session->state != ISCSI_STATE_LOGGED_IN) { session->state = ISCSI_STATE_RECOVERY_FAILED; - if (conn) - wake_up(&conn->ehwait); + if (session->leadconn) + wake_up(&session->leadconn->ehwait); } spin_unlock_bh(&session->lock); } @@ -971,7 +983,6 @@ int iscsi_eh_host_reset(struct scsi_cmnd *sc) struct Scsi_Host *host = sc->device->host; struct iscsi_session *session = iscsi_hostdata(host->hostdata); struct iscsi_conn *conn = session->leadconn; - int fail_session = 0; spin_lock_bh(&session->lock); if (session->state == ISCSI_STATE_TERMINATE) { @@ -982,19 +993,13 @@ failed: return FAILED; } - if (sc->SCp.phase == session->age) { - debug_scsi("failing connection CID %d due to SCSI host reset\n", - conn->id); - fail_session = 1; - } spin_unlock_bh(&session->lock); /* * we drop the lock here but the leadconn cannot be destoyed while * we are in the scsi eh */ - if (fail_session) - iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); + iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); debug_scsi("iscsi_eh_host_reset wait for relogin\n"); wait_event_interruptible(conn->ehwait, @@ -1015,62 +1020,43 @@ failed: } EXPORT_SYMBOL_GPL(iscsi_eh_host_reset); -static void iscsi_tmabort_timedout(unsigned long data) +static void iscsi_tmf_timedout(unsigned long data) { - struct iscsi_cmd_task *ctask = (struct iscsi_cmd_task *)data; - struct iscsi_conn *conn = ctask->conn; + struct iscsi_conn *conn = (struct iscsi_conn *)data; struct iscsi_session *session = conn->session; spin_lock(&session->lock); - if (conn->tmabort_state == TMABORT_INITIAL) { - conn->tmabort_state = TMABORT_TIMEDOUT; - debug_scsi("tmabort timedout [sc %p itt 0x%x]\n", - ctask->sc, ctask->itt); + if (conn->tmf_state == TMF_QUEUED) { + conn->tmf_state = TMF_TIMEDOUT; + debug_scsi("tmf timedout\n"); /* unblock eh_abort() */ wake_up(&conn->ehwait); } spin_unlock(&session->lock); } -static int iscsi_exec_abort_task(struct scsi_cmnd *sc, - struct iscsi_cmd_task *ctask) +static int iscsi_exec_task_mgmt_fn(struct iscsi_conn *conn, + struct iscsi_tm *hdr, int age) { - struct iscsi_conn *conn = ctask->conn; struct iscsi_session *session = conn->session; - struct iscsi_tm *hdr = &conn->tmhdr; - - /* - * ctask timed out but session is OK requests must be serialized. - */ - memset(hdr, 0, sizeof(struct iscsi_tm)); - hdr->opcode = ISCSI_OP_SCSI_TMFUNC | ISCSI_OP_IMMEDIATE; - hdr->flags = ISCSI_TM_FUNC_ABORT_TASK; - hdr->flags |= ISCSI_FLAG_CMD_FINAL; - memcpy(hdr->lun, ctask->hdr->lun, sizeof(hdr->lun)); - hdr->rtt = ctask->hdr->itt; - hdr->refcmdsn = ctask->hdr->cmdsn; + struct iscsi_mgmt_task *mtask; - ctask->mtask = __iscsi_conn_send_pdu(conn, (struct iscsi_hdr *)hdr, - NULL, 0); - if (!ctask->mtask) { + mtask = __iscsi_conn_send_pdu(conn, (struct iscsi_hdr *)hdr, + NULL, 0); + if (!mtask) { spin_unlock_bh(&session->lock); iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); - spin_lock_bh(&session->lock) - debug_scsi("abort sent failure [itt 0x%x]\n", ctask->itt); + spin_lock_bh(&session->lock); + debug_scsi("tmf exec failure\n"); return -EPERM; } - ctask->state = ISCSI_TASK_ABORTING; - - debug_scsi("abort sent [itt 0x%x]\n", ctask->itt); + conn->tmfcmd_pdus_cnt++; + conn->tmf_timer.expires = 30 * HZ + jiffies; + conn->tmf_timer.function = iscsi_tmf_timedout; + conn->tmf_timer.data = (unsigned long)conn; + add_timer(&conn->tmf_timer); + debug_scsi("tmf set timeout\n"); - if (conn->tmabort_state == TMABORT_INITIAL) { - conn->tmfcmd_pdus_cnt++; - conn->tmabort_timer.expires = 20*HZ + jiffies; - conn->tmabort_timer.function = iscsi_tmabort_timedout; - conn->tmabort_timer.data = (unsigned long)ctask; - add_timer(&conn->tmabort_timer); - debug_scsi("abort set timeout [itt 0x%x]\n", ctask->itt); - } spin_unlock_bh(&session->lock); mutex_unlock(&session->eh_mutex); scsi_queue_work(session->host, &conn->xmitwork); @@ -1078,61 +1064,30 @@ static int iscsi_exec_abort_task(struct scsi_cmnd *sc, /* * block eh thread until: * - * 1) abort response - * 2) abort timeout + * 1) tmf response + * 2) tmf timeout * 3) session is terminated or restarted or userspace has * given up on recovery */ - wait_event_interruptible(conn->ehwait, - sc->SCp.phase != session->age || + wait_event_interruptible(conn->ehwait, age != session->age || session->state != ISCSI_STATE_LOGGED_IN || - conn->tmabort_state != TMABORT_INITIAL); + conn->tmf_state != TMF_QUEUED); if (signal_pending(current)) flush_signals(current); - del_timer_sync(&conn->tmabort_timer); + del_timer_sync(&conn->tmf_timer); + mutex_lock(&session->eh_mutex); spin_lock_bh(&session->lock); - return 0; -} - -/* - * session lock must be held - */ -static struct iscsi_mgmt_task * -iscsi_remove_mgmt_task(struct kfifo *fifo, uint32_t itt) -{ - int i, nr_tasks = __kfifo_len(fifo) / sizeof(void*); - struct iscsi_mgmt_task *task; - - debug_scsi("searching %d tasks\n", nr_tasks); - - for (i = 0; i < nr_tasks; i++) { - __kfifo_get(fifo, (void*)&task, sizeof(void*)); - debug_scsi("check task %u\n", task->itt); - - if (task->itt == itt) { - debug_scsi("matched task\n"); - return task; - } + /* if the session drops it will clean up the mtask */ + if (age != session->age || + session->state != ISCSI_STATE_LOGGED_IN) + return -ENOTCONN; - __kfifo_put(fifo, (void*)&task, sizeof(void*)); + if (!list_empty(&mtask->running)) { + list_del_init(&mtask->running); + __kfifo_put(session->mgmtpool.queue, (void*)&mtask, + sizeof(void*)); } - return NULL; -} - -static int iscsi_ctask_mtask_cleanup(struct iscsi_cmd_task *ctask) -{ - struct iscsi_conn *conn = ctask->conn; - struct iscsi_session *session = conn->session; - - if (!ctask->mtask) - return -EINVAL; - - if (!iscsi_remove_mgmt_task(conn->mgmtqueue, ctask->mtask->itt)) - list_del(&ctask->mtask->running); - __kfifo_put(session->mgmtpool.queue, (void*)&ctask->mtask, - sizeof(void*)); - ctask->mtask = NULL; return 0; } @@ -1156,7 +1111,6 @@ static void fail_command(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask, conn->session->queued_cmdsn--; else conn->session->tt->cleanup_cmd_task(conn, ctask); - iscsi_ctask_mtask_cleanup(ctask); sc->result = err; scsi_set_resid(sc, scsi_bufflen(sc)); @@ -1166,6 +1120,44 @@ static void fail_command(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask, __iscsi_put_ctask(ctask); } +/* + * Fail commands. session lock held and recv side suspended and xmit + * thread flushed + */ +static void fail_all_commands(struct iscsi_conn *conn, unsigned lun) +{ + struct iscsi_cmd_task *ctask, *tmp; + + if (conn->ctask && (conn->ctask->sc->device->lun == lun || lun == -1)) + conn->ctask = NULL; + + /* flush pending */ + list_for_each_entry_safe(ctask, tmp, &conn->xmitqueue, running) { + if (lun == ctask->sc->device->lun || lun == -1) { + debug_scsi("failing pending sc %p itt 0x%x\n", + ctask->sc, ctask->itt); + fail_command(conn, ctask, DID_BUS_BUSY << 16); + } + } + + list_for_each_entry_safe(ctask, tmp, &conn->requeue, running) { + if (lun == ctask->sc->device->lun || lun == -1) { + debug_scsi("failing requeued sc %p itt 0x%x\n", + ctask->sc, ctask->itt); + fail_command(conn, ctask, DID_BUS_BUSY << 16); + } + } + + /* fail all other running */ + list_for_each_entry_safe(ctask, tmp, &conn->run_list, running) { + if (lun == ctask->sc->device->lun || lun == -1) { + debug_scsi("failing in progress sc %p itt 0x%x\n", + ctask->sc, ctask->itt); + fail_command(conn, ctask, DID_BUS_BUSY << 16); + } + } +} + static void iscsi_suspend_tx(struct iscsi_conn *conn) { set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx); @@ -1178,13 +1170,26 @@ static void iscsi_start_tx(struct iscsi_conn *conn) scsi_queue_work(conn->session->host, &conn->xmitwork); } +static void iscsi_prep_abort_task_pdu(struct iscsi_cmd_task *ctask, + struct iscsi_tm *hdr) +{ + memset(hdr, 0, sizeof(*hdr)); + hdr->opcode = ISCSI_OP_SCSI_TMFUNC | ISCSI_OP_IMMEDIATE; + hdr->flags = ISCSI_TM_FUNC_ABORT_TASK & ISCSI_FLAG_TM_FUNC_MASK; + hdr->flags |= ISCSI_FLAG_CMD_FINAL; + memcpy(hdr->lun, ctask->hdr->lun, sizeof(hdr->lun)); + hdr->rtt = ctask->hdr->itt; + hdr->refcmdsn = ctask->hdr->cmdsn; +} + int iscsi_eh_abort(struct scsi_cmnd *sc) { struct Scsi_Host *host = sc->device->host; struct iscsi_session *session = iscsi_hostdata(host->hostdata); - struct iscsi_cmd_task *ctask; struct iscsi_conn *conn; - int rc; + struct iscsi_cmd_task *ctask; + struct iscsi_tm *hdr; + int rc, age; mutex_lock(&session->eh_mutex); spin_lock_bh(&session->lock); @@ -1199,19 +1204,23 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) return SUCCESS; } - ctask = (struct iscsi_cmd_task *)sc->SCp.ptr; - conn = ctask->conn; - - conn->eh_abort_cnt++; - debug_scsi("aborting [sc %p itt 0x%x]\n", sc, ctask->itt); - /* * If we are not logged in or we have started a new session * then let the host reset code handle this */ - if (session->state != ISCSI_STATE_LOGGED_IN || - sc->SCp.phase != session->age) - goto failed; + if (!session->leadconn || session->state != ISCSI_STATE_LOGGED_IN || + sc->SCp.phase != session->age) { + spin_unlock_bh(&session->lock); + mutex_unlock(&session->eh_mutex); + return FAILED; + } + + conn = session->leadconn; + conn->eh_abort_cnt++; + age = session->age; + + ctask = (struct iscsi_cmd_task *)sc->SCp.ptr; + debug_scsi("aborting [sc %p itt 0x%x]\n", sc, ctask->itt); /* ctask completed before time out */ if (!ctask->sc) { @@ -1219,27 +1228,26 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) goto success; } - /* what should we do here ? */ - if (conn->ctask == ctask) { - printk(KERN_INFO "iscsi: sc %p itt 0x%x partially sent. " - "Failing abort\n", sc, ctask->itt); - goto failed; - } - if (ctask->state == ISCSI_TASK_PENDING) { fail_command(conn, ctask, DID_ABORT << 16); goto success; } - conn->tmabort_state = TMABORT_INITIAL; - rc = iscsi_exec_abort_task(sc, ctask); - if (rc || sc->SCp.phase != session->age || - session->state != ISCSI_STATE_LOGGED_IN) + /* only have one tmf outstanding at a time */ + if (conn->tmf_state != TMF_INITIAL) goto failed; - iscsi_ctask_mtask_cleanup(ctask); + conn->tmf_state = TMF_QUEUED; - switch (conn->tmabort_state) { - case TMABORT_SUCCESS: + hdr = &conn->tmhdr; + iscsi_prep_abort_task_pdu(ctask, hdr); + + if (iscsi_exec_task_mgmt_fn(conn, hdr, age)) { + rc = FAILED; + goto failed; + } + + switch (conn->tmf_state) { + case TMF_SUCCESS: spin_unlock_bh(&session->lock); iscsi_suspend_tx(conn); /* @@ -1248,22 +1256,26 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) write_lock_bh(conn->recv_lock); spin_lock(&session->lock); fail_command(conn, ctask, DID_ABORT << 16); + conn->tmf_state = TMF_INITIAL; spin_unlock(&session->lock); write_unlock_bh(conn->recv_lock); iscsi_start_tx(conn); goto success_unlocked; - case TMABORT_NOT_FOUND: - if (!ctask->sc) { + case TMF_TIMEDOUT: + spin_unlock_bh(&session->lock); + iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); + goto failed_unlocked; + case TMF_NOT_FOUND: + if (!sc->SCp.ptr) { + conn->tmf_state = TMF_INITIAL; /* ctask completed before tmf abort response */ debug_scsi("sc completed while abort in progress\n"); goto success; } /* fall through */ default: - /* timedout or failed */ - spin_unlock_bh(&session->lock); - iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); - goto failed_unlocked; + conn->tmf_state = TMF_INITIAL; + goto failed; } success: @@ -1276,12 +1288,93 @@ success_unlocked: failed: spin_unlock_bh(&session->lock); failed_unlocked: - debug_scsi("abort failed [sc %lx itt 0x%x]\n", (long)sc, ctask->itt); + debug_scsi("abort failed [sc %p itt 0x%x]\n", sc, + ctask ? ctask->itt : 0); mutex_unlock(&session->eh_mutex); return FAILED; } EXPORT_SYMBOL_GPL(iscsi_eh_abort); +static void iscsi_prep_lun_reset_pdu(struct scsi_cmnd *sc, struct iscsi_tm *hdr) +{ + memset(hdr, 0, sizeof(*hdr)); + hdr->opcode = ISCSI_OP_SCSI_TMFUNC | ISCSI_OP_IMMEDIATE; + hdr->flags = ISCSI_TM_FUNC_LOGICAL_UNIT_RESET & ISCSI_FLAG_TM_FUNC_MASK; + hdr->flags |= ISCSI_FLAG_CMD_FINAL; + int_to_scsilun(sc->device->lun, (struct scsi_lun *)hdr->lun); + hdr->rtt = ISCSI_RESERVED_TAG; +} + +int iscsi_eh_device_reset(struct scsi_cmnd *sc) +{ + struct Scsi_Host *host = sc->device->host; + struct iscsi_session *session = iscsi_hostdata(host->hostdata); + struct iscsi_conn *conn; + struct iscsi_tm *hdr; + int rc = FAILED; + + debug_scsi("LU Reset [sc %p lun %u]\n", sc, sc->device->lun); + + mutex_lock(&session->eh_mutex); + spin_lock_bh(&session->lock); + /* + * Just check if we are not logged in. We cannot check for + * the phase because the reset could come from a ioctl. + */ + if (!session->leadconn || session->state != ISCSI_STATE_LOGGED_IN) + goto unlock; + conn = session->leadconn; + + /* only have one tmf outstanding at a time */ + if (conn->tmf_state != TMF_INITIAL) + goto unlock; + conn->tmf_state = TMF_QUEUED; + + hdr = &conn->tmhdr; + iscsi_prep_lun_reset_pdu(sc, hdr); + + if (iscsi_exec_task_mgmt_fn(conn, hdr, session->age)) { + rc = FAILED; + goto unlock; + } + + switch (conn->tmf_state) { + case TMF_SUCCESS: + break; + case TMF_TIMEDOUT: + spin_unlock_bh(&session->lock); + iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); + goto done; + default: + conn->tmf_state = TMF_INITIAL; + goto unlock; + } + + rc = SUCCESS; + spin_unlock_bh(&session->lock); + + iscsi_suspend_tx(conn); + /* need to grab the recv lock then session lock */ + write_lock_bh(conn->recv_lock); + spin_lock(&session->lock); + fail_all_commands(conn, sc->device->lun); + conn->tmf_state = TMF_INITIAL; + spin_unlock(&session->lock); + write_unlock_bh(conn->recv_lock); + + iscsi_start_tx(conn); + goto done; + +unlock: + spin_unlock_bh(&session->lock); +done: + debug_scsi("iscsi_eh_device_reset %s\n", + rc == SUCCESS ? "SUCCESS" : "FAILED"); + mutex_unlock(&session->eh_mutex); + return rc; +} +EXPORT_SYMBOL_GPL(iscsi_eh_device_reset); + int iscsi_pool_init(struct iscsi_queue *q, int max, void ***items, int item_size) { @@ -1546,17 +1639,12 @@ iscsi_conn_setup(struct iscsi_cls_session *cls_session, uint32_t conn_idx) conn->c_stage = ISCSI_CONN_INITIAL_STAGE; conn->id = conn_idx; conn->exp_statsn = 0; - conn->tmabort_state = TMABORT_INITIAL; + conn->tmf_state = TMF_INITIAL; INIT_LIST_HEAD(&conn->run_list); INIT_LIST_HEAD(&conn->mgmt_run_list); + INIT_LIST_HEAD(&conn->mgmtqueue); INIT_LIST_HEAD(&conn->xmitqueue); - - /* initialize general immediate & non-immediate PDU commands queue */ - conn->mgmtqueue = kfifo_alloc(session->mgmtpool_max * sizeof(void*), - GFP_KERNEL, NULL); - if (conn->mgmtqueue == ERR_PTR(-ENOMEM)) - goto mgmtqueue_alloc_fail; - + INIT_LIST_HEAD(&conn->requeue); INIT_WORK(&conn->xmitwork, iscsi_xmitworker); /* allocate login_mtask used for the login/text sequences */ @@ -1574,7 +1662,7 @@ iscsi_conn_setup(struct iscsi_cls_session *cls_session, uint32_t conn_idx) goto login_mtask_data_alloc_fail; conn->login_mtask->data = conn->data = data; - init_timer(&conn->tmabort_timer); + init_timer(&conn->tmf_timer); init_waitqueue_head(&conn->ehwait); return cls_conn; @@ -1583,8 +1671,6 @@ login_mtask_data_alloc_fail: __kfifo_put(session->mgmtpool.queue, (void*)&conn->login_mtask, sizeof(void*)); login_mtask_alloc_fail: - kfifo_free(conn->mgmtqueue); -mgmtqueue_alloc_fail: iscsi_destroy_conn(cls_conn); return NULL; } @@ -1604,7 +1690,6 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn) unsigned long flags; spin_lock_bh(&session->lock); - set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx); conn->c_stage = ISCSI_CONN_CLEANUP_WAIT; if (session->leadconn == conn) { /* @@ -1637,7 +1722,7 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn) } /* flush queued up work because we free the connection below */ - scsi_flush_work(session->host); + iscsi_suspend_tx(conn); spin_lock_bh(&session->lock); kfree(conn->data); @@ -1648,8 +1733,6 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn) session->leadconn = NULL; spin_unlock_bh(&session->lock); - kfifo_free(conn->mgmtqueue); - iscsi_destroy_conn(cls_conn); } EXPORT_SYMBOL_GPL(iscsi_conn_teardown); @@ -1684,7 +1767,7 @@ int iscsi_conn_start(struct iscsi_cls_conn *cls_conn) * commands after successful recovery */ conn->stop_stage = 0; - conn->tmabort_state = TMABORT_INITIAL; + conn->tmf_state = TMF_INITIAL; session->age++; spin_unlock_bh(&session->lock); @@ -1709,10 +1792,11 @@ flush_control_queues(struct iscsi_session *session, struct iscsi_conn *conn) struct iscsi_mgmt_task *mtask, *tmp; /* handle pending */ - while (__kfifo_get(conn->mgmtqueue, (void*)&mtask, sizeof(void*))) { + list_for_each_entry_safe(mtask, tmp, &conn->mgmtqueue, running) { + debug_scsi("flushing pending mgmt task itt 0x%x\n", mtask->itt); + list_del_init(&mtask->running); if (mtask == conn->login_mtask) continue; - debug_scsi("flushing pending mgmt task itt 0x%x\n", mtask->itt); __kfifo_put(session->mgmtpool.queue, (void*)&mtask, sizeof(void*)); } @@ -1720,7 +1804,7 @@ flush_control_queues(struct iscsi_session *session, struct iscsi_conn *conn) /* handle running */ list_for_each_entry_safe(mtask, tmp, &conn->mgmt_run_list, running) { debug_scsi("flushing running mgmt task itt 0x%x\n", mtask->itt); - list_del(&mtask->running); + list_del_init(&mtask->running); if (mtask == conn->login_mtask) continue; @@ -1731,28 +1815,6 @@ flush_control_queues(struct iscsi_session *session, struct iscsi_conn *conn) conn->mtask = NULL; } -/* Fail commands. Mutex and session lock held and recv side suspended */ -static void fail_all_commands(struct iscsi_conn *conn) -{ - struct iscsi_cmd_task *ctask, *tmp; - - /* flush pending */ - list_for_each_entry_safe(ctask, tmp, &conn->xmitqueue, running) { - debug_scsi("failing pending sc %p itt 0x%x\n", ctask->sc, - ctask->itt); - fail_command(conn, ctask, DID_BUS_BUSY << 16); - } - - /* fail all other running */ - list_for_each_entry_safe(ctask, tmp, &conn->run_list, running) { - debug_scsi("failing in progress sc %p itt 0x%x\n", - ctask->sc, ctask->itt); - fail_command(conn, ctask, DID_BUS_BUSY << 16); - } - - conn->ctask = NULL; -} - static void iscsi_start_session_recovery(struct iscsi_session *session, struct iscsi_conn *conn, int flag) { @@ -1818,7 +1880,7 @@ static void iscsi_start_session_recovery(struct iscsi_session *session, * flush queues. */ spin_lock_bh(&session->lock); - fail_all_commands(conn); + fail_all_commands(conn, -1); flush_control_queues(session, conn); spin_unlock_bh(&session->lock); mutex_unlock(&session->eh_mutex); @@ -1869,6 +1931,9 @@ int iscsi_set_param(struct iscsi_cls_conn *cls_conn, uint32_t value; switch(param) { + case ISCSI_PARAM_FAST_ABORT: + sscanf(buf, "%d", &session->fast_abort); + break; case ISCSI_PARAM_MAX_RECV_DLENGTH: sscanf(buf, "%d", &conn->max_recv_dlength); break; @@ -1983,6 +2048,9 @@ int iscsi_session_get_param(struct iscsi_cls_session *cls_session, int len; switch(param) { + case ISCSI_PARAM_FAST_ABORT: + len = sprintf(buf, "%d\n", session->fast_abort); + break; case ISCSI_PARAM_INITIAL_R2T_EN: len = sprintf(buf, "%d\n", session->initial_r2t_en); break; diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index cb48b80c0865..75d3069ecaa0 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -30,7 +30,7 @@ #include #include -#define ISCSI_SESSION_ATTRS 15 +#define ISCSI_SESSION_ATTRS 16 #define ISCSI_CONN_ATTRS 11 #define ISCSI_HOST_ATTRS 4 #define ISCSI_TRANSPORT_VERSION "2.0-724" @@ -1218,6 +1218,7 @@ iscsi_session_attr(username, ISCSI_PARAM_USERNAME, 1); iscsi_session_attr(username_in, ISCSI_PARAM_USERNAME_IN, 1); iscsi_session_attr(password, ISCSI_PARAM_PASSWORD, 1); iscsi_session_attr(password_in, ISCSI_PARAM_PASSWORD_IN, 1); +iscsi_session_attr(fast_abort, ISCSI_PARAM_FAST_ABORT, 1); #define iscsi_priv_session_attr_show(field, format) \ static ssize_t \ @@ -1439,6 +1440,7 @@ iscsi_register_transport(struct iscsi_transport *tt) SETUP_SESSION_RD_ATTR(password_in, ISCSI_USERNAME_IN); SETUP_SESSION_RD_ATTR(username, ISCSI_PASSWORD); SETUP_SESSION_RD_ATTR(username_in, ISCSI_PASSWORD_IN); + SETUP_SESSION_RD_ATTR(fast_abort, ISCSI_FAST_ABORT); SETUP_PRIV_SESSION_RD_ATTR(recovery_tmo); BUG_ON(count > ISCSI_SESSION_ATTRS); diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h index 50e907f42048..bff0b1f7857b 100644 --- a/include/scsi/iscsi_if.h +++ b/include/scsi/iscsi_if.h @@ -236,6 +236,7 @@ enum iscsi_param { ISCSI_PARAM_PASSWORD, ISCSI_PARAM_PASSWORD_IN, + ISCSI_PARAM_FAST_ABORT, /* must always be last */ ISCSI_PARAM_MAX, }; @@ -266,6 +267,7 @@ enum iscsi_param { #define ISCSI_USERNAME_IN (1 << ISCSI_PARAM_USERNAME_IN) #define ISCSI_PASSWORD (1 << ISCSI_PARAM_PASSWORD) #define ISCSI_PASSWORD_IN (1 << ISCSI_PARAM_PASSWORD_IN) +#define ISCSI_FAST_ABORT (1 << ISCSI_PARAM_FAST_ABORT) /* iSCSI HBA params */ enum iscsi_host_param { diff --git a/include/scsi/iscsi_proto.h b/include/scsi/iscsi_proto.h index 8d1e4e8026fe..751c81eaa7f3 100644 --- a/include/scsi/iscsi_proto.h +++ b/include/scsi/iscsi_proto.h @@ -600,6 +600,8 @@ struct iscsi_reject { #define ISCSI_MIN_MAX_BURST_LEN 512 #define ISCSI_MAX_MAX_BURST_LEN 16777215 +#define ISCSI_DEF_TIME2WAIT 2 + /************************* RFC 3720 End *****************************/ #endif /* ISCSI_PROTO_H */ diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index b4b31132618b..89429f433f85 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -57,11 +57,14 @@ struct iscsi_nopin; #define ISCSI_MAX_CMD_PER_LUN 128 /* Task Mgmt states */ -#define TMABORT_INITIAL 0x0 -#define TMABORT_SUCCESS 0x1 -#define TMABORT_FAILED 0x2 -#define TMABORT_TIMEDOUT 0x3 -#define TMABORT_NOT_FOUND 0x4 +enum { + TMF_INITIAL, + TMF_QUEUED, + TMF_SUCCESS, + TMF_FAILED, + TMF_TIMEDOUT, + TMF_NOT_FOUND, +}; /* Connection suspend "bit" */ #define ISCSI_SUSPEND_BIT 1 @@ -91,7 +94,6 @@ enum { ISCSI_TASK_COMPLETED, ISCSI_TASK_PENDING, ISCSI_TASK_RUNNING, - ISCSI_TASK_ABORTING, }; struct iscsi_cmd_task { @@ -110,7 +112,6 @@ struct iscsi_cmd_task { unsigned data_count; /* remaining Data-Out */ struct scsi_cmnd *sc; /* associated SCSI cmd*/ struct iscsi_conn *conn; /* used connection */ - struct iscsi_mgmt_task *mtask; /* tmf mtask in progr */ /* state set/tested under session->lock */ int state; @@ -152,10 +153,11 @@ struct iscsi_conn { struct iscsi_cmd_task *ctask; /* xmit ctask in progress */ /* xmit */ - struct kfifo *mgmtqueue; /* mgmt (control) xmit queue */ + struct list_head mgmtqueue; /* mgmt (control) xmit queue */ struct list_head mgmt_run_list; /* list of control tasks */ struct list_head xmitqueue; /* data-path cmd queue */ struct list_head run_list; /* list of cmds in progress */ + struct list_head requeue; /* tasks needing another run */ struct work_struct xmitwork; /* per-conn. xmit workqueue */ unsigned long suspend_tx; /* suspend Tx */ unsigned long suspend_rx; /* suspend Rx */ @@ -163,8 +165,8 @@ struct iscsi_conn { /* abort */ wait_queue_head_t ehwait; /* used in eh_abort() */ struct iscsi_tm tmhdr; - struct timer_list tmabort_timer; - int tmabort_state; /* see TMABORT_INITIAL, etc.*/ + struct timer_list tmf_timer; + int tmf_state; /* see TMF_INITIAL, etc.*/ /* negotiated params */ unsigned max_recv_dlength; /* initiator_max_recv_dsl*/ @@ -231,6 +233,7 @@ struct iscsi_session { int pdu_inorder_en; int dataseq_inorder_en; int erl; + int fast_abort; int tpgt; char *username; char *username_in; @@ -268,6 +271,7 @@ struct iscsi_session { extern int iscsi_change_queue_depth(struct scsi_device *sdev, int depth); extern int iscsi_eh_abort(struct scsi_cmnd *sc); extern int iscsi_eh_host_reset(struct scsi_cmnd *sc); +extern int iscsi_eh_device_reset(struct scsi_cmnd *sc); extern int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)); @@ -326,6 +330,7 @@ extern int __iscsi_complete_pdu(struct iscsi_conn *, struct iscsi_hdr *, char *, int); extern int iscsi_verify_itt(struct iscsi_conn *, struct iscsi_hdr *, uint32_t *); +extern void iscsi_requeue_ctask(struct iscsi_cmd_task *ctask); /* * generic helpers -- cgit v1.2.3-59-g8ed1b From da32dd681f7a1a17073c42b375fc23cf73c92155 Mon Sep 17 00:00:00 2001 From: Olaf Kirch Date: Thu, 13 Dec 2007 12:43:21 -0600 Subject: [SCSI] iscsi_tcp: rewrite recv path Rewrite recv path. Fixes: - data digest processing and error handling. - ahs support. Some fixups by Mike Christie Signed-off-by: Olaf Kirch Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 1018 +++++++++++++++++++++++----------------------- drivers/scsi/iscsi_tcp.h | 66 +-- include/scsi/libiscsi.h | 4 + 3 files changed, 552 insertions(+), 536 deletions(-) diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 4b226b88b68a..1b540e03f5bf 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -48,7 +48,7 @@ MODULE_AUTHOR("Dmitry Yusupov , " "Alex Aizman "); MODULE_DESCRIPTION("iSCSI/TCP data-path"); MODULE_LICENSE("GPL"); -/* #define DEBUG_TCP */ +#undef DEBUG_TCP #define DEBUG_ASSERT #ifdef DEBUG_TCP @@ -67,10 +67,15 @@ MODULE_LICENSE("GPL"); static unsigned int iscsi_max_lun = 512; module_param_named(max_lun, iscsi_max_lun, uint, S_IRUGO); +static int iscsi_tcp_hdr_recv_done(struct iscsi_tcp_conn *tcp_conn, + struct iscsi_chunk *chunk); + static inline void iscsi_buf_init_iov(struct iscsi_buf *ibuf, char *vbuf, int size) { - sg_init_one(&ibuf->sg, vbuf, size); + ibuf->sg.page = virt_to_page(vbuf); + ibuf->sg.offset = offset_in_page(vbuf); + ibuf->sg.length = size; ibuf->sent = 0; ibuf->use_sendmsg = 1; } @@ -78,12 +83,13 @@ iscsi_buf_init_iov(struct iscsi_buf *ibuf, char *vbuf, int size) static inline void iscsi_buf_init_sg(struct iscsi_buf *ibuf, struct scatterlist *sg) { - sg_init_table(&ibuf->sg, 1); - sg_set_page(&ibuf->sg, sg_page(sg), sg->length, sg->offset); + ibuf->sg.page = sg->page; + ibuf->sg.offset = sg->offset; + ibuf->sg.length = sg->length; /* * Fastpath: sg element fits into single page */ - if (sg->length + sg->offset <= PAGE_SIZE && !PageSlab(sg_page(sg))) + if (sg->length + sg->offset <= PAGE_SIZE && !PageSlab(sg->page)) ibuf->use_sendmsg = 0; else ibuf->use_sendmsg = 1; @@ -110,72 +116,331 @@ iscsi_hdr_digest(struct iscsi_conn *conn, struct iscsi_buf *buf, buf->sg.length += sizeof(u32); } +/* + * Scatterlist handling: inside the iscsi_chunk, we + * remember an index into the scatterlist, and set data/size + * to the current scatterlist entry. For highmem pages, we + * kmap as needed. + * + * Note that the page is unmapped when we return from + * TCP's data_ready handler, so we may end up mapping and + * unmapping the same page repeatedly. The whole reason + * for this is that we shouldn't keep the page mapped + * outside the softirq. + */ + +/** + * iscsi_tcp_chunk_init_sg - init indicated scatterlist entry + * @chunk: the buffer object + * @idx: index into scatterlist + * @offset: byte offset into that sg entry + * + * This function sets up the chunk so that subsequent + * data is copied to the indicated sg entry, at the given + * offset. + */ +static inline void +iscsi_tcp_chunk_init_sg(struct iscsi_chunk *chunk, + unsigned int idx, unsigned int offset) +{ + struct scatterlist *sg; + + BUG_ON(chunk->sg == NULL); + + sg = &chunk->sg[idx]; + chunk->sg_index = idx; + chunk->sg_offset = offset; + chunk->size = min(sg->length - offset, chunk->total_size); + chunk->data = NULL; +} + +/** + * iscsi_tcp_chunk_map - map the current S/G page + * @chunk: iscsi chunk + * + * We only need to possibly kmap data if scatter lists are being used, + * because the iscsi passthrough and internal IO paths will never use high + * mem pages. + */ +static inline void +iscsi_tcp_chunk_map(struct iscsi_chunk *chunk) +{ + struct scatterlist *sg; + + if (chunk->data != NULL || !chunk->sg) + return; + + sg = &chunk->sg[chunk->sg_index]; + BUG_ON(chunk->sg_mapped); + BUG_ON(sg->length == 0); + chunk->sg_mapped = kmap_atomic(sg->page, KM_SOFTIRQ0); + chunk->data = chunk->sg_mapped + sg->offset + chunk->sg_offset; +} + +static inline void +iscsi_tcp_chunk_unmap(struct iscsi_chunk *chunk) +{ + if (chunk->sg_mapped) { + kunmap_atomic(chunk->sg_mapped, KM_SOFTIRQ0); + chunk->sg_mapped = NULL; + chunk->data = NULL; + } +} + +/* + * Splice the digest buffer into the buffer + */ +static inline void +iscsi_tcp_chunk_splice_digest(struct iscsi_chunk *chunk, void *digest) +{ + chunk->data = digest; + chunk->digest_len = ISCSI_DIGEST_SIZE; + chunk->total_size += ISCSI_DIGEST_SIZE; + chunk->size = ISCSI_DIGEST_SIZE; + chunk->copied = 0; + chunk->sg = NULL; + chunk->sg_index = 0; + chunk->hash = NULL; +} + +/** + * iscsi_tcp_chunk_done - check whether the chunk is complete + * @chunk: iscsi chunk to check + * + * Check if we're done receiving this chunk. If the receive + * buffer is full but we expect more data, move on to the + * next entry in the scatterlist. + * + * If the amount of data we received isn't a multiple of 4, + * we will transparently receive the pad bytes, too. + * + * This function must be re-entrant. + */ static inline int -iscsi_hdr_extract(struct iscsi_tcp_conn *tcp_conn) +iscsi_tcp_chunk_done(struct iscsi_chunk *chunk) { - struct sk_buff *skb = tcp_conn->in.skb; + static unsigned char padbuf[ISCSI_PAD_LEN]; + + if (chunk->copied < chunk->size) { + iscsi_tcp_chunk_map(chunk); + return 0; + } - tcp_conn->in.zero_copy_hdr = 0; + chunk->total_copied += chunk->copied; + chunk->copied = 0; + chunk->size = 0; - if (tcp_conn->in.copy >= tcp_conn->hdr_size && - tcp_conn->in_progress == IN_PROGRESS_WAIT_HEADER) { - /* - * Zero-copy PDU Header: using connection context - * to store header pointer. - */ - if (skb_shinfo(skb)->frag_list == NULL && - !skb_shinfo(skb)->nr_frags) { - tcp_conn->in.hdr = (struct iscsi_hdr *) - ((char*)skb->data + tcp_conn->in.offset); - tcp_conn->in.zero_copy_hdr = 1; - } else { - /* ignoring return code since we checked - * in.copy before */ - skb_copy_bits(skb, tcp_conn->in.offset, - &tcp_conn->hdr, tcp_conn->hdr_size); - tcp_conn->in.hdr = &tcp_conn->hdr; + /* Unmap the current scatterlist page, if there is one. */ + iscsi_tcp_chunk_unmap(chunk); + + /* Do we have more scatterlist entries? */ + if (chunk->total_copied < chunk->total_size) { + /* Proceed to the next entry in the scatterlist. */ + iscsi_tcp_chunk_init_sg(chunk, chunk->sg_index + 1, 0); + iscsi_tcp_chunk_map(chunk); + BUG_ON(chunk->size == 0); + return 0; + } + + /* Do we need to handle padding? */ + if (chunk->total_copied & (ISCSI_PAD_LEN-1)) { + unsigned int pad; + + pad = ISCSI_PAD_LEN - (chunk->total_copied & (ISCSI_PAD_LEN-1)); + debug_tcp("consume %d pad bytes\n", pad); + chunk->total_size += pad; + chunk->size = pad; + chunk->data = padbuf; + return 0; + } + + /* + * Set us up for receiving the data digest. hdr digest + * is completely handled in hdr done function. + */ + if (chunk->hash) { + if (chunk->digest_len == 0) { + crypto_hash_final(chunk->hash, chunk->digest); + iscsi_tcp_chunk_splice_digest(chunk, + chunk->recv_digest); + return 0; } - tcp_conn->in.offset += tcp_conn->hdr_size; - tcp_conn->in.copy -= tcp_conn->hdr_size; - } else { - int hdr_remains; - int copylen; + } - /* - * PDU header scattered across SKB's, - * copying it... This'll happen quite rarely. - */ + return 1; +} + +/** + * iscsi_tcp_chunk_recv - copy data to chunk + * @tcp_conn: the iSCSI TCP connection + * @chunk: the buffer to copy to + * @ptr: data pointer + * @len: amount of data available + * + * This function copies up to @len bytes to the + * given buffer, and returns the number of bytes + * consumed, which can actually be less than @len. + * + * If hash digest is enabled, the function will update the + * hash while copying. + * Combining these two operations doesn't buy us a lot (yet), + * but in the future we could implement combined copy+crc, + * just way we do for network layer checksums. + */ +static int +iscsi_tcp_chunk_recv(struct iscsi_tcp_conn *tcp_conn, + struct iscsi_chunk *chunk, const void *ptr, + unsigned int len) +{ + struct scatterlist sg; + unsigned int copy, copied = 0; + + while (!iscsi_tcp_chunk_done(chunk)) { + if (copied == len) + goto out; + + copy = min(len - copied, chunk->size - chunk->copied); + memcpy(chunk->data + chunk->copied, ptr + copied, copy); + + if (chunk->hash) { + sg_init_one(&sg, ptr + copied, copy); + crypto_hash_update(chunk->hash, &sg, copy); + } + chunk->copied += copy; + copied += copy; + } + +out: + return copied; +} - if (tcp_conn->in_progress == IN_PROGRESS_WAIT_HEADER) - tcp_conn->in.hdr_offset = 0; +static inline void +iscsi_tcp_dgst_header(struct hash_desc *hash, const void *hdr, size_t hdrlen, + unsigned char digest[ISCSI_DIGEST_SIZE]) +{ + struct scatterlist sg; + + sg_init_one(&sg, hdr, hdrlen); + crypto_hash_digest(hash, &sg, hdrlen, digest); +} + +static inline int +iscsi_tcp_dgst_verify(struct iscsi_tcp_conn *tcp_conn, + struct iscsi_chunk *chunk) +{ + if (!chunk->digest_len) + return 1; + + if (memcmp(chunk->recv_digest, chunk->digest, chunk->digest_len)) { + debug_scsi("digest mismatch\n"); + return 0; + } - hdr_remains = tcp_conn->hdr_size - tcp_conn->in.hdr_offset; - BUG_ON(hdr_remains <= 0); + return 1; +} - copylen = min(tcp_conn->in.copy, hdr_remains); - skb_copy_bits(skb, tcp_conn->in.offset, - (char*)&tcp_conn->hdr + tcp_conn->in.hdr_offset, - copylen); +/* + * Helper function to set up chunk buffer + */ +static inline void +__iscsi_chunk_init(struct iscsi_chunk *chunk, size_t size, + iscsi_chunk_done_fn_t *done, struct hash_desc *hash) +{ + memset(chunk, 0, sizeof(*chunk)); + chunk->total_size = size; + chunk->done = done; - debug_tcp("PDU gather offset %d bytes %d in.offset %d " - "in.copy %d\n", tcp_conn->in.hdr_offset, copylen, - tcp_conn->in.offset, tcp_conn->in.copy); + if (hash) { + chunk->hash = hash; + crypto_hash_init(hash); + } +} - tcp_conn->in.offset += copylen; - tcp_conn->in.copy -= copylen; - if (copylen < hdr_remains) { - tcp_conn->in_progress = IN_PROGRESS_HEADER_GATHER; - tcp_conn->in.hdr_offset += copylen; - return -EAGAIN; +static inline void +iscsi_chunk_init_linear(struct iscsi_chunk *chunk, void *data, size_t size, + iscsi_chunk_done_fn_t *done, struct hash_desc *hash) +{ + __iscsi_chunk_init(chunk, size, done, hash); + chunk->data = data; + chunk->size = size; +} + +static inline int +iscsi_chunk_seek_sg(struct iscsi_chunk *chunk, + struct scatterlist *sg, unsigned int sg_count, + unsigned int offset, size_t size, + iscsi_chunk_done_fn_t *done, struct hash_desc *hash) +{ + unsigned int i; + + __iscsi_chunk_init(chunk, size, done, hash); + for (i = 0; i < sg_count; ++i) { + if (offset < sg[i].length) { + chunk->sg = sg; + chunk->sg_count = sg_count; + iscsi_tcp_chunk_init_sg(chunk, i, offset); + return 0; } - tcp_conn->in.hdr = &tcp_conn->hdr; - tcp_conn->discontiguous_hdr_cnt++; - tcp_conn->in_progress = IN_PROGRESS_WAIT_HEADER; + offset -= sg[i].length; } + return ISCSI_ERR_DATA_OFFSET; +} + +/** + * iscsi_tcp_hdr_recv_prep - prep chunk for hdr reception + * @tcp_conn: iscsi connection to prep for + * + * This function always passes NULL for the hash argument, because when this + * function is called we do not yet know the final size of the header and want + * to delay the digest processing until we know that. + */ +static void +iscsi_tcp_hdr_recv_prep(struct iscsi_tcp_conn *tcp_conn) +{ + debug_tcp("iscsi_tcp_hdr_recv_prep(%p%s)\n", tcp_conn, + tcp_conn->iscsi_conn->hdrdgst_en ? ", digest enabled" : ""); + iscsi_chunk_init_linear(&tcp_conn->in.chunk, + tcp_conn->in.hdr_buf, sizeof(struct iscsi_hdr), + iscsi_tcp_hdr_recv_done, NULL); +} + +/* + * Handle incoming reply to any other type of command + */ +static int +iscsi_tcp_data_recv_done(struct iscsi_tcp_conn *tcp_conn, + struct iscsi_chunk *chunk) +{ + struct iscsi_conn *conn = tcp_conn->iscsi_conn; + int rc = 0; + + if (!iscsi_tcp_dgst_verify(tcp_conn, chunk)) + return ISCSI_ERR_DATA_DGST; + + rc = iscsi_complete_pdu(conn, tcp_conn->in.hdr, + conn->data, tcp_conn->in.datalen); + if (rc) + return rc; + + iscsi_tcp_hdr_recv_prep(tcp_conn); return 0; } +static void +iscsi_tcp_data_recv_prep(struct iscsi_tcp_conn *tcp_conn) +{ + struct iscsi_conn *conn = tcp_conn->iscsi_conn; + struct hash_desc *rx_hash = NULL; + + if (conn->datadgst_en) + rx_hash = &tcp_conn->rx_hash; + + iscsi_chunk_init_linear(&tcp_conn->in.chunk, + conn->data, tcp_conn->in.datalen, + iscsi_tcp_data_recv_done, rx_hash); +} + /* * must be called with session lock */ @@ -417,16 +682,49 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) return 0; } +/* + * Handle incoming reply to DataIn command + */ static int -iscsi_tcp_hdr_recv(struct iscsi_conn *conn) +iscsi_tcp_process_data_in(struct iscsi_tcp_conn *tcp_conn, + struct iscsi_chunk *chunk) +{ + struct iscsi_conn *conn = tcp_conn->iscsi_conn; + struct iscsi_hdr *hdr = tcp_conn->in.hdr; + int rc; + + if (!iscsi_tcp_dgst_verify(tcp_conn, chunk)) + return ISCSI_ERR_DATA_DGST; + + /* check for non-exceptional status */ + if (hdr->flags & ISCSI_FLAG_DATA_STATUS) { + rc = iscsi_complete_pdu(conn, tcp_conn->in.hdr, NULL, 0); + if (rc) + return rc; + } + + iscsi_tcp_hdr_recv_prep(tcp_conn); + return 0; +} + +/** + * iscsi_tcp_hdr_dissect - process PDU header + * @conn: iSCSI connection + * @hdr: PDU header + * + * This function analyzes the header of the PDU received, + * and performs several sanity checks. If the PDU is accompanied + * by data, the receive buffer is set up to copy the incoming data + * to the correct location. + */ +static int +iscsi_tcp_hdr_dissect(struct iscsi_conn *conn, struct iscsi_hdr *hdr) { int rc = 0, opcode, ahslen; - struct iscsi_hdr *hdr; struct iscsi_session *session = conn->session; struct iscsi_tcp_conn *tcp_conn = conn->dd_data; - uint32_t cdgst, rdgst = 0, itt; - - hdr = tcp_conn->in.hdr; + struct iscsi_cmd_task *ctask; + uint32_t itt; /* verify PDU length */ tcp_conn->in.datalen = ntoh24(hdr->dlength); @@ -435,77 +733,72 @@ iscsi_tcp_hdr_recv(struct iscsi_conn *conn) tcp_conn->in.datalen, conn->max_recv_dlength); return ISCSI_ERR_DATALEN; } - tcp_conn->data_copied = 0; - /* read AHS */ + /* Additional header segments. So far, we don't + * process additional headers. + */ ahslen = hdr->hlength << 2; - tcp_conn->in.offset += ahslen; - tcp_conn->in.copy -= ahslen; - if (tcp_conn->in.copy < 0) { - printk(KERN_ERR "iscsi_tcp: can't handle AHS with length " - "%d bytes\n", ahslen); - return ISCSI_ERR_AHSLEN; - } - - /* calculate read padding */ - tcp_conn->in.padding = tcp_conn->in.datalen & (ISCSI_PAD_LEN-1); - if (tcp_conn->in.padding) { - tcp_conn->in.padding = ISCSI_PAD_LEN - tcp_conn->in.padding; - debug_scsi("read padding %d bytes\n", tcp_conn->in.padding); - } - - if (conn->hdrdgst_en) { - struct scatterlist sg; - - sg_init_one(&sg, (u8 *)hdr, - sizeof(struct iscsi_hdr) + ahslen); - crypto_hash_digest(&tcp_conn->rx_hash, &sg, sg.length, - (u8 *)&cdgst); - rdgst = *(uint32_t*)((char*)hdr + sizeof(struct iscsi_hdr) + - ahslen); - if (cdgst != rdgst) { - printk(KERN_ERR "iscsi_tcp: hdrdgst error " - "recv 0x%x calc 0x%x\n", rdgst, cdgst); - return ISCSI_ERR_HDR_DGST; - } - } opcode = hdr->opcode & ISCSI_OPCODE_MASK; /* verify itt (itt encoding: age+cid+itt) */ rc = iscsi_verify_itt(conn, hdr, &itt); if (rc == ISCSI_ERR_NO_SCSI_CMD) { + /* XXX: what does this do? */ tcp_conn->in.datalen = 0; /* force drop */ return 0; } else if (rc) return rc; - debug_tcp("opcode 0x%x offset %d copy %d ahslen %d datalen %d\n", - opcode, tcp_conn->in.offset, tcp_conn->in.copy, - ahslen, tcp_conn->in.datalen); + debug_tcp("opcode 0x%x ahslen %d datalen %d\n", + opcode, ahslen, tcp_conn->in.datalen); switch(opcode) { case ISCSI_OP_SCSI_DATA_IN: - tcp_conn->in.ctask = session->cmds[itt]; - rc = iscsi_data_rsp(conn, tcp_conn->in.ctask); + ctask = session->cmds[itt]; + rc = iscsi_data_rsp(conn, ctask); if (rc) return rc; + if (tcp_conn->in.datalen) { + struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; + struct hash_desc *rx_hash = NULL; + + /* + * Setup copy of Data-In into the Scsi_Cmnd + * Scatterlist case: + * We set up the iscsi_chunk to point to the next + * scatterlist entry to copy to. As we go along, + * we move on to the next scatterlist entry and + * update the digest per-entry. + */ + if (conn->datadgst_en) + rx_hash = &tcp_conn->rx_hash; + + debug_tcp("iscsi_tcp_begin_data_in(%p, offset=%d, " + "datalen=%d)\n", tcp_conn, + tcp_ctask->data_offset, + tcp_conn->in.datalen); + return iscsi_chunk_seek_sg(&tcp_conn->in.chunk, + scsi_sglist(ctask->sc), + scsi_sg_count(ctask->sc), + tcp_ctask->data_offset, + tcp_conn->in.datalen, + iscsi_tcp_process_data_in, + rx_hash); + } /* fall through */ case ISCSI_OP_SCSI_CMD_RSP: - tcp_conn->in.ctask = session->cmds[itt]; - if (tcp_conn->in.datalen) - goto copy_hdr; - - spin_lock(&session->lock); - rc = __iscsi_complete_pdu(conn, hdr, NULL, 0); - spin_unlock(&session->lock); + if (tcp_conn->in.datalen) { + iscsi_tcp_data_recv_prep(tcp_conn); + return 0; + } + rc = iscsi_complete_pdu(conn, hdr, NULL, 0); break; case ISCSI_OP_R2T: - tcp_conn->in.ctask = session->cmds[itt]; + ctask = session->cmds[itt]; if (ahslen) rc = ISCSI_ERR_AHSLEN; - else if (tcp_conn->in.ctask->sc->sc_data_direction == - DMA_TO_DEVICE) - rc = iscsi_r2t_rsp(conn, tcp_conn->in.ctask); + else if (ctask->sc->sc_data_direction == DMA_TO_DEVICE) + rc = iscsi_r2t_rsp(conn, ctask); else rc = ISCSI_ERR_PROTO; break; @@ -518,8 +811,7 @@ iscsi_tcp_hdr_recv(struct iscsi_conn *conn) * than 8K, but there are no targets that currently do this. * For now we fail until we find a vendor that needs it */ - if (ISCSI_DEF_MAX_RECV_SEG_LEN < - tcp_conn->in.datalen) { + if (ISCSI_DEF_MAX_RECV_SEG_LEN < tcp_conn->in.datalen) { printk(KERN_ERR "iscsi_tcp: received buffer of len %u " "but conn buffer is only %u (opcode %0x)\n", tcp_conn->in.datalen, @@ -528,8 +820,13 @@ iscsi_tcp_hdr_recv(struct iscsi_conn *conn) break; } - if (tcp_conn->in.datalen) - goto copy_hdr; + /* If there's data coming in with the response, + * receive it to the connection's buffer. + */ + if (tcp_conn->in.datalen) { + iscsi_tcp_data_recv_prep(tcp_conn); + return 0; + } /* fall through */ case ISCSI_OP_LOGOUT_RSP: case ISCSI_OP_NOOP_IN: @@ -541,129 +838,15 @@ iscsi_tcp_hdr_recv(struct iscsi_conn *conn) break; } - return rc; - -copy_hdr: - /* - * if we did zero copy for the header but we will need multiple - * skbs to complete the command then we have to copy the header - * for later use - */ - if (tcp_conn->in.zero_copy_hdr && tcp_conn->in.copy <= - (tcp_conn->in.datalen + tcp_conn->in.padding + - (conn->datadgst_en ? 4 : 0))) { - debug_tcp("Copying header for later use. in.copy %d in.datalen" - " %d\n", tcp_conn->in.copy, tcp_conn->in.datalen); - memcpy(&tcp_conn->hdr, tcp_conn->in.hdr, - sizeof(struct iscsi_hdr)); - tcp_conn->in.hdr = &tcp_conn->hdr; - tcp_conn->in.zero_copy_hdr = 0; - } - return 0; -} - -/** - * iscsi_ctask_copy - copy skb bits to the destanation cmd task - * @conn: iscsi tcp connection - * @ctask: scsi command task - * @buf: buffer to copy to - * @buf_size: size of buffer - * @offset: offset within the buffer - * - * Notes: - * The function calls skb_copy_bits() and updates per-connection and - * per-cmd byte counters. - * - * Read counters (in bytes): - * - * conn->in.offset offset within in progress SKB - * conn->in.copy left to copy from in progress SKB - * including padding - * conn->in.copied copied already from in progress SKB - * conn->data_copied copied already from in progress buffer - * ctask->sent total bytes sent up to the MidLayer - * ctask->data_count left to copy from in progress Data-In - * buf_left left to copy from in progress buffer - **/ -static inline int -iscsi_ctask_copy(struct iscsi_tcp_conn *tcp_conn, struct iscsi_cmd_task *ctask, - void *buf, int buf_size, int offset) -{ - struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; - int buf_left = buf_size - (tcp_conn->data_copied + offset); - unsigned size = min(tcp_conn->in.copy, buf_left); - int rc; - - size = min(size, ctask->data_count); - - debug_tcp("ctask_copy %d bytes at offset %d copied %d\n", - size, tcp_conn->in.offset, tcp_conn->in.copied); - - BUG_ON(size <= 0); - BUG_ON(tcp_ctask->sent + size > scsi_bufflen(ctask->sc)); - - rc = skb_copy_bits(tcp_conn->in.skb, tcp_conn->in.offset, - (char*)buf + (offset + tcp_conn->data_copied), size); - /* must fit into skb->len */ - BUG_ON(rc); - - tcp_conn->in.offset += size; - tcp_conn->in.copy -= size; - tcp_conn->in.copied += size; - tcp_conn->data_copied += size; - tcp_ctask->sent += size; - ctask->data_count -= size; - - BUG_ON(tcp_conn->in.copy < 0); - BUG_ON(ctask->data_count < 0); - - if (buf_size != (tcp_conn->data_copied + offset)) { - if (!ctask->data_count) { - BUG_ON(buf_size - tcp_conn->data_copied < 0); - /* done with this PDU */ - return buf_size - tcp_conn->data_copied; - } - return -EAGAIN; + if (rc == 0) { + /* Anything that comes with data should have + * been handled above. */ + if (tcp_conn->in.datalen) + return ISCSI_ERR_PROTO; + iscsi_tcp_hdr_recv_prep(tcp_conn); } - /* done with this buffer or with both - PDU and buffer */ - tcp_conn->data_copied = 0; - return 0; -} - -/** - * iscsi_tcp_copy - copy skb bits to the destanation buffer - * @conn: iscsi tcp connection - * - * Notes: - * The function calls skb_copy_bits() and updates per-connection - * byte counters. - **/ -static inline int -iscsi_tcp_copy(struct iscsi_conn *conn, int buf_size) -{ - struct iscsi_tcp_conn *tcp_conn = conn->dd_data; - int buf_left = buf_size - tcp_conn->data_copied; - int size = min(tcp_conn->in.copy, buf_left); - int rc; - - debug_tcp("tcp_copy %d bytes at offset %d copied %d\n", - size, tcp_conn->in.offset, tcp_conn->data_copied); - BUG_ON(size <= 0); - - rc = skb_copy_bits(tcp_conn->in.skb, tcp_conn->in.offset, - (char*)conn->data + tcp_conn->data_copied, size); - BUG_ON(rc); - - tcp_conn->in.offset += size; - tcp_conn->in.copy -= size; - tcp_conn->in.copied += size; - tcp_conn->data_copied += size; - - if (buf_size != tcp_conn->data_copied) - return -EAGAIN; - - return 0; + return rc; } static inline void @@ -677,325 +860,146 @@ partial_sg_digest_update(struct hash_desc *desc, struct scatterlist *sg, crypto_hash_update(desc, &temp, length); } -static void -iscsi_recv_digest_update(struct iscsi_tcp_conn *tcp_conn, char* buf, int len) -{ - struct scatterlist tmp; - - sg_init_one(&tmp, buf, len); - crypto_hash_update(&tcp_conn->rx_hash, &tmp, len); -} - -static int iscsi_scsi_data_in(struct iscsi_conn *conn) +/** + * iscsi_tcp_hdr_recv_done - process PDU header + * + * This is the callback invoked when the PDU header has + * been received. If the header is followed by additional + * header segments, we go back for more data. + */ +static int +iscsi_tcp_hdr_recv_done(struct iscsi_tcp_conn *tcp_conn, + struct iscsi_chunk *chunk) { - struct iscsi_tcp_conn *tcp_conn = conn->dd_data; - struct iscsi_cmd_task *ctask = tcp_conn->in.ctask; - struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; - struct scsi_cmnd *sc = ctask->sc; - struct scatterlist *sg; - int i, offset, rc = 0; - - BUG_ON((void*)ctask != sc->SCp.ptr); - - offset = tcp_ctask->data_offset; - sg = scsi_sglist(sc); - - if (tcp_ctask->data_offset) - for (i = 0; i < tcp_ctask->sg_count; i++) - offset -= sg[i].length; - /* we've passed through partial sg*/ - if (offset < 0) - offset = 0; - - for (i = tcp_ctask->sg_count; i < scsi_sg_count(sc); i++) { - char *dest; - - dest = kmap_atomic(sg_page(&sg[i]), KM_SOFTIRQ0); - rc = iscsi_ctask_copy(tcp_conn, ctask, dest + sg[i].offset, - sg[i].length, offset); - kunmap_atomic(dest, KM_SOFTIRQ0); - if (rc == -EAGAIN) - /* continue with the next SKB/PDU */ - return rc; - if (!rc) { - if (conn->datadgst_en) { - if (!offset) - crypto_hash_update( - &tcp_conn->rx_hash, - &sg[i], sg[i].length); - else - partial_sg_digest_update( - &tcp_conn->rx_hash, - &sg[i], - sg[i].offset + offset, - sg[i].length - offset); - } - offset = 0; - tcp_ctask->sg_count++; - } - - if (!ctask->data_count) { - if (rc && conn->datadgst_en) - /* - * data-in is complete, but buffer not... - */ - partial_sg_digest_update(&tcp_conn->rx_hash, - &sg[i], - sg[i].offset, - sg[i].length-rc); - rc = 0; - break; - } - - if (!tcp_conn->in.copy) - return -EAGAIN; - } - BUG_ON(ctask->data_count); + struct iscsi_conn *conn = tcp_conn->iscsi_conn; + struct iscsi_hdr *hdr; - /* check for non-exceptional status */ - if (tcp_conn->in.hdr->flags & ISCSI_FLAG_DATA_STATUS) { - debug_scsi("done [sc %lx res %d itt 0x%x flags 0x%x]\n", - (long)sc, sc->result, ctask->itt, - tcp_conn->in.hdr->flags); - spin_lock(&conn->session->lock); - __iscsi_complete_pdu(conn, tcp_conn->in.hdr, NULL, 0); - spin_unlock(&conn->session->lock); + /* Check if there are additional header segments + * *prior* to computing the digest, because we + * may need to go back to the caller for more. + */ + hdr = (struct iscsi_hdr *) tcp_conn->in.hdr_buf; + if (chunk->copied == sizeof(struct iscsi_hdr) && hdr->hlength) { + /* Bump the header length - the caller will + * just loop around and get the AHS for us, and + * call again. */ + unsigned int ahslen = hdr->hlength << 2; + + /* Make sure we don't overflow */ + if (sizeof(*hdr) + ahslen > sizeof(tcp_conn->in.hdr_buf)) + return ISCSI_ERR_AHSLEN; + + chunk->total_size += ahslen; + chunk->size += ahslen; + return 0; } - return rc; -} - -static int -iscsi_data_recv(struct iscsi_conn *conn) -{ - struct iscsi_tcp_conn *tcp_conn = conn->dd_data; - int rc = 0, opcode; - - opcode = tcp_conn->in.hdr->opcode & ISCSI_OPCODE_MASK; - switch (opcode) { - case ISCSI_OP_SCSI_DATA_IN: - rc = iscsi_scsi_data_in(conn); - break; - case ISCSI_OP_SCSI_CMD_RSP: - case ISCSI_OP_TEXT_RSP: - case ISCSI_OP_LOGIN_RSP: - case ISCSI_OP_ASYNC_EVENT: - case ISCSI_OP_REJECT: - /* - * Collect data segment to the connection's data - * placeholder - */ - if (iscsi_tcp_copy(conn, tcp_conn->in.datalen)) { - rc = -EAGAIN; - goto exit; + /* We're done processing the header. See if we're doing + * header digests; if so, set up the recv_digest buffer + * and go back for more. */ + if (conn->hdrdgst_en) { + if (chunk->digest_len == 0) { + iscsi_tcp_chunk_splice_digest(chunk, + chunk->recv_digest); + return 0; } + iscsi_tcp_dgst_header(&tcp_conn->rx_hash, hdr, + chunk->total_copied - ISCSI_DIGEST_SIZE, + chunk->digest); - rc = iscsi_complete_pdu(conn, tcp_conn->in.hdr, conn->data, - tcp_conn->in.datalen); - if (!rc && conn->datadgst_en && opcode != ISCSI_OP_LOGIN_RSP) - iscsi_recv_digest_update(tcp_conn, conn->data, - tcp_conn->in.datalen); - break; - default: - BUG_ON(1); + if (!iscsi_tcp_dgst_verify(tcp_conn, chunk)) + return ISCSI_ERR_HDR_DGST; } -exit: - return rc; + + tcp_conn->in.hdr = hdr; + return iscsi_tcp_hdr_dissect(conn, hdr); } /** - * iscsi_tcp_data_recv - TCP receive in sendfile fashion + * iscsi_tcp_recv - TCP receive in sendfile fashion * @rd_desc: read descriptor * @skb: socket buffer * @offset: offset in skb * @len: skb->len - offset **/ static int -iscsi_tcp_data_recv(read_descriptor_t *rd_desc, struct sk_buff *skb, - unsigned int offset, size_t len) +iscsi_tcp_recv(read_descriptor_t *rd_desc, struct sk_buff *skb, + unsigned int offset, size_t len) { - int rc; struct iscsi_conn *conn = rd_desc->arg.data; struct iscsi_tcp_conn *tcp_conn = conn->dd_data; - int processed; - char pad[ISCSI_PAD_LEN]; - struct scatterlist sg; - - /* - * Save current SKB and its offset in the corresponding - * connection context. - */ - tcp_conn->in.copy = skb->len - offset; - tcp_conn->in.offset = offset; - tcp_conn->in.skb = skb; - tcp_conn->in.len = tcp_conn->in.copy; - BUG_ON(tcp_conn->in.copy <= 0); - debug_tcp("in %d bytes\n", tcp_conn->in.copy); + struct iscsi_chunk *chunk = &tcp_conn->in.chunk; + struct skb_seq_state seq; + unsigned int consumed = 0; + int rc = 0; -more: - tcp_conn->in.copied = 0; - rc = 0; + debug_tcp("in %d bytes\n", skb->len - offset); if (unlikely(conn->suspend_rx)) { debug_tcp("conn %d Rx suspended!\n", conn->id); return 0; } - if (tcp_conn->in_progress == IN_PROGRESS_WAIT_HEADER || - tcp_conn->in_progress == IN_PROGRESS_HEADER_GATHER) { - rc = iscsi_hdr_extract(tcp_conn); - if (rc) { - if (rc == -EAGAIN) - goto nomore; - else { - iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); - return 0; - } - } - - /* - * Verify and process incoming PDU header. - */ - rc = iscsi_tcp_hdr_recv(conn); - if (!rc && tcp_conn->in.datalen) { - if (conn->datadgst_en) - crypto_hash_init(&tcp_conn->rx_hash); - tcp_conn->in_progress = IN_PROGRESS_DATA_RECV; - } else if (rc) { - iscsi_conn_failure(conn, rc); - return 0; - } - } - - if (tcp_conn->in_progress == IN_PROGRESS_DDIGEST_RECV && - tcp_conn->in.copy) { - uint32_t recv_digest; + skb_prepare_seq_read(skb, offset, skb->len, &seq); + while (1) { + unsigned int avail; + const u8 *ptr; - debug_tcp("extra data_recv offset %d copy %d\n", - tcp_conn->in.offset, tcp_conn->in.copy); - - if (!tcp_conn->data_copied) { - if (tcp_conn->in.padding) { - debug_tcp("padding -> %d\n", - tcp_conn->in.padding); - memset(pad, 0, tcp_conn->in.padding); - sg_init_one(&sg, pad, tcp_conn->in.padding); - crypto_hash_update(&tcp_conn->rx_hash, - &sg, sg.length); + avail = skb_seq_read(consumed, &ptr, &seq); + if (avail == 0) + break; + BUG_ON(chunk->copied >= chunk->size); + + debug_tcp("skb %p ptr=%p avail=%u\n", skb, ptr, avail); + rc = iscsi_tcp_chunk_recv(tcp_conn, chunk, ptr, avail); + BUG_ON(rc == 0); + consumed += rc; + + if (chunk->total_copied >= chunk->total_size) { + rc = chunk->done(tcp_conn, chunk); + if (rc != 0) { + skb_abort_seq_read(&seq); + goto error; } - crypto_hash_final(&tcp_conn->rx_hash, - (u8 *) &tcp_conn->in.datadgst); - debug_tcp("rx digest 0x%x\n", tcp_conn->in.datadgst); - } - - rc = iscsi_tcp_copy(conn, sizeof(uint32_t)); - if (rc) { - if (rc == -EAGAIN) - goto again; - iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); - return 0; - } - - memcpy(&recv_digest, conn->data, sizeof(uint32_t)); - if (recv_digest != tcp_conn->in.datadgst) { - debug_tcp("iscsi_tcp: data digest error!" - "0x%x != 0x%x\n", recv_digest, - tcp_conn->in.datadgst); - iscsi_conn_failure(conn, ISCSI_ERR_DATA_DGST); - return 0; - } else { - debug_tcp("iscsi_tcp: data digest match!" - "0x%x == 0x%x\n", recv_digest, - tcp_conn->in.datadgst); - tcp_conn->in_progress = IN_PROGRESS_WAIT_HEADER; - } - } - - if (tcp_conn->in_progress == IN_PROGRESS_DATA_RECV && - tcp_conn->in.copy) { - debug_tcp("data_recv offset %d copy %d\n", - tcp_conn->in.offset, tcp_conn->in.copy); - rc = iscsi_data_recv(conn); - if (rc) { - if (rc == -EAGAIN) - goto again; - iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); - return 0; + /* The done() functions sets up the + * next chunk. */ } - - if (tcp_conn->in.padding) - tcp_conn->in_progress = IN_PROGRESS_PAD_RECV; - else if (conn->datadgst_en) - tcp_conn->in_progress = IN_PROGRESS_DDIGEST_RECV; - else - tcp_conn->in_progress = IN_PROGRESS_WAIT_HEADER; - tcp_conn->data_copied = 0; - } - - if (tcp_conn->in_progress == IN_PROGRESS_PAD_RECV && - tcp_conn->in.copy) { - int copylen = min(tcp_conn->in.padding - tcp_conn->data_copied, - tcp_conn->in.copy); - - tcp_conn->in.copy -= copylen; - tcp_conn->in.offset += copylen; - tcp_conn->data_copied += copylen; - - if (tcp_conn->data_copied != tcp_conn->in.padding) - tcp_conn->in_progress = IN_PROGRESS_PAD_RECV; - else if (conn->datadgst_en) - tcp_conn->in_progress = IN_PROGRESS_DDIGEST_RECV; - else - tcp_conn->in_progress = IN_PROGRESS_WAIT_HEADER; - tcp_conn->data_copied = 0; } - debug_tcp("f, processed %d from out of %d padding %d\n", - tcp_conn->in.offset - offset, (int)len, tcp_conn->in.padding); - BUG_ON(tcp_conn->in.offset - offset > len); + conn->rxdata_octets += consumed; + return consumed; - if (tcp_conn->in.offset - offset != len) { - debug_tcp("continue to process %d bytes\n", - (int)len - (tcp_conn->in.offset - offset)); - goto more; - } - -nomore: - processed = tcp_conn->in.offset - offset; - BUG_ON(processed == 0); - return processed; - -again: - processed = tcp_conn->in.offset - offset; - debug_tcp("c, processed %d from out of %d rd_desc_cnt %d\n", - processed, (int)len, (int)rd_desc->count); - BUG_ON(processed == 0); - BUG_ON(processed > len); - - conn->rxdata_octets += processed; - return processed; +error: + debug_tcp("Error receiving PDU, errno=%d\n", rc); + iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); + return 0; } static void iscsi_tcp_data_ready(struct sock *sk, int flag) { struct iscsi_conn *conn = sk->sk_user_data; + struct iscsi_tcp_conn *tcp_conn = conn->dd_data; read_descriptor_t rd_desc; read_lock(&sk->sk_callback_lock); /* - * Use rd_desc to pass 'conn' to iscsi_tcp_data_recv. + * Use rd_desc to pass 'conn' to iscsi_tcp_recv. * We set count to 1 because we want the network layer to - * hand us all the skbs that are available. iscsi_tcp_data_recv + * hand us all the skbs that are available. iscsi_tcp_recv * handled pdus that cross buffers or pdus that still need data. */ rd_desc.arg.data = conn; rd_desc.count = 1; - tcp_read_sock(sk, &rd_desc, iscsi_tcp_data_recv); + tcp_read_sock(sk, &rd_desc, iscsi_tcp_recv); read_unlock(&sk->sk_callback_lock); + + /* If we had to (atomically) map a highmem page, + * unmap it now. */ + iscsi_tcp_chunk_unmap(&tcp_conn->in.chunk); } static void @@ -1097,9 +1101,9 @@ iscsi_send(struct iscsi_conn *conn, struct iscsi_buf *buf, int size, int flags) * slab case. */ if (buf->use_sendmsg) - res = sock_no_sendpage(sk, sg_page(&buf->sg), offset, size, flags); + res = sock_no_sendpage(sk, buf->sg.page, offset, size, flags); else - res = tcp_conn->sendpage(sk, sg_page(&buf->sg), offset, size, flags); + res = tcp_conn->sendpage(sk, buf->sg.page, offset, size, flags); if (res >= 0) { conn->txdata_octets += res; @@ -1783,9 +1787,6 @@ iscsi_tcp_conn_create(struct iscsi_cls_session *cls_session, uint32_t conn_idx) conn->dd_data = tcp_conn; tcp_conn->iscsi_conn = conn; - tcp_conn->in_progress = IN_PROGRESS_WAIT_HEADER; - /* initial operational parameters */ - tcp_conn->hdr_size = sizeof(struct iscsi_hdr); tcp_conn->tx_hash.tfm = crypto_alloc_hash("crc32c", 0, CRYPTO_ALG_ASYNC); @@ -1862,11 +1863,9 @@ static void iscsi_tcp_conn_stop(struct iscsi_cls_conn *cls_conn, int flag) { struct iscsi_conn *conn = cls_conn->dd_data; - struct iscsi_tcp_conn *tcp_conn = conn->dd_data; iscsi_conn_stop(cls_conn, flag); iscsi_tcp_release_conn(conn); - tcp_conn->hdr_size = sizeof(struct iscsi_hdr); } static int iscsi_tcp_get_addr(struct iscsi_conn *conn, struct socket *sock, @@ -1966,7 +1965,7 @@ iscsi_tcp_conn_bind(struct iscsi_cls_session *cls_session, /* * set receive state machine into initial state */ - tcp_conn->in_progress = IN_PROGRESS_WAIT_HEADER; + iscsi_tcp_hdr_recv_prep(tcp_conn); return 0; free_socket: @@ -2059,9 +2058,6 @@ iscsi_conn_set_param(struct iscsi_cls_conn *cls_conn, enum iscsi_param param, switch(param) { case ISCSI_PARAM_HDRDGST_EN: iscsi_set_param(cls_conn, param, buf, buflen); - tcp_conn->hdr_size = sizeof(struct iscsi_hdr); - if (conn->hdrdgst_en) - tcp_conn->hdr_size += sizeof(__u32); break; case ISCSI_PARAM_DATADGST_EN: iscsi_set_param(cls_conn, param, buf, buflen); diff --git a/drivers/scsi/iscsi_tcp.h b/drivers/scsi/iscsi_tcp.h index 7eba44df0a7f..f1c541151100 100644 --- a/drivers/scsi/iscsi_tcp.h +++ b/drivers/scsi/iscsi_tcp.h @@ -24,13 +24,6 @@ #include -/* Socket's Receive state machine */ -#define IN_PROGRESS_WAIT_HEADER 0x0 -#define IN_PROGRESS_HEADER_GATHER 0x1 -#define IN_PROGRESS_DATA_RECV 0x2 -#define IN_PROGRESS_DDIGEST_RECV 0x3 -#define IN_PROGRESS_PAD_RECV 0x4 - /* xmit state machine */ #define XMSTATE_IDLE 0x0 #define XMSTATE_CMD_HDR_INIT 0x1 @@ -54,41 +47,64 @@ struct crypto_hash; struct socket; +struct iscsi_tcp_conn; +struct iscsi_chunk; + +typedef int iscsi_chunk_done_fn_t(struct iscsi_tcp_conn *, + struct iscsi_chunk *); + +struct iscsi_chunk { + unsigned char *data; + unsigned int size; + unsigned int copied; + unsigned int total_size; + unsigned int total_copied; + + struct hash_desc *hash; + unsigned char recv_digest[ISCSI_DIGEST_SIZE]; + unsigned char digest[ISCSI_DIGEST_SIZE]; + unsigned int digest_len; + + struct scatterlist *sg; + void *sg_mapped; + unsigned int sg_offset; + unsigned int sg_index; + unsigned int sg_count; + + iscsi_chunk_done_fn_t *done; +}; /* Socket connection recieve helper */ struct iscsi_tcp_recv { struct iscsi_hdr *hdr; - struct sk_buff *skb; - int offset; - int len; - int hdr_offset; - int copy; - int copied; - int padding; - struct iscsi_cmd_task *ctask; /* current cmd in progress */ + struct iscsi_chunk chunk; + + /* Allocate buffer for BHS + AHS */ + uint32_t hdr_buf[64]; /* copied and flipped values */ int datalen; - int datadgst; - char zero_copy_hdr; +}; + +/* Socket connection send helper */ +struct iscsi_tcp_send { + struct iscsi_hdr *hdr; + struct iscsi_chunk chunk; + struct iscsi_chunk data_chunk; + + /* Allocate buffer for BHS + AHS */ + uint32_t hdr_buf[64]; }; struct iscsi_tcp_conn { struct iscsi_conn *iscsi_conn; struct socket *sock; - struct iscsi_hdr hdr; /* header placeholder */ - char hdrext[4*sizeof(__u16) + - sizeof(__u32)]; - int data_copied; int stop_stage; /* conn_stop() flag: * * stop to recover, * * stop to terminate */ - /* iSCSI connection-wide sequencing */ - int hdr_size; /* PDU header size */ - /* control data */ struct iscsi_tcp_recv in; /* TCP receive context */ - int in_progress; /* connection state machine */ + struct iscsi_tcp_send out; /* TCP send context */ /* old values for socket callbacks */ void (*old_data_ready)(struct sock *, int); diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index 89429f433f85..e1fb3d0927b0 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -77,6 +77,10 @@ enum { #define ISCSI_ADDRESS_BUF_LEN 64 +enum { + ISCSI_DIGEST_SIZE = sizeof(__u32), +}; + struct iscsi_mgmt_task { /* * Becuae LLDs allocate their hdr differently, this is a pointer to -- cgit v1.2.3-59-g8ed1b From 7207fea452cfdd2d4e2f4419e2c31f570edbade3 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Thu, 13 Dec 2007 12:43:22 -0600 Subject: [SCSI] iscsi: Prettify resid handling and some extra checks - Check to see that OVERFLOW is not negative indicating a bug. - Unify handling of UNDERFLOW and OVERFLOW to the same code. - Also handle BIDI_OVERFLOW. Signed-off-by: Boaz Harrosh Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 16 +++++++--------- drivers/scsi/libiscsi.c | 12 +++++++----- 2 files changed, 14 insertions(+), 14 deletions(-) diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 1b540e03f5bf..fd88777df28b 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -507,22 +507,20 @@ iscsi_data_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) } if (rhdr->flags & ISCSI_FLAG_DATA_STATUS) { + sc->result = (DID_OK << 16) | rhdr->cmd_status; conn->exp_statsn = be32_to_cpu(rhdr->statsn) + 1; - if (rhdr->flags & ISCSI_FLAG_DATA_UNDERFLOW) { + if (rhdr->flags & (ISCSI_FLAG_DATA_UNDERFLOW | + ISCSI_FLAG_DATA_OVERFLOW)) { int res_count = be32_to_cpu(rhdr->residual_count); if (res_count > 0 && - res_count <= scsi_bufflen(sc)) { + (rhdr->flags & ISCSI_FLAG_CMD_OVERFLOW || + res_count <= scsi_bufflen(sc))) scsi_set_resid(sc, res_count); - sc->result = (DID_OK << 16) | rhdr->cmd_status; - } else + else sc->result = (DID_BAD_TARGET << 16) | rhdr->cmd_status; - } else if (rhdr->flags & ISCSI_FLAG_DATA_OVERFLOW) { - scsi_set_resid(sc, be32_to_cpu(rhdr->residual_count)); - sc->result = (DID_OK << 16) | rhdr->cmd_status; - } else - sc->result = (DID_OK << 16) | rhdr->cmd_status; + } } conn->datain_pdus_cnt++; diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 176458f35316..0beb4c620962 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -291,17 +291,19 @@ invalid_datalen: min_t(uint16_t, senselen, SCSI_SENSE_BUFFERSIZE)); } - if (rhdr->flags & ISCSI_FLAG_CMD_UNDERFLOW) { + if (rhdr->flags & (ISCSI_FLAG_CMD_UNDERFLOW | + ISCSI_FLAG_CMD_OVERFLOW)) { int res_count = be32_to_cpu(rhdr->residual_count); - if (res_count > 0 && res_count <= scsi_bufflen(sc)) + if (res_count > 0 && + (rhdr->flags & ISCSI_FLAG_CMD_OVERFLOW || + res_count <= scsi_bufflen(sc))) scsi_set_resid(sc, res_count); else sc->result = (DID_BAD_TARGET << 16) | rhdr->cmd_status; - } else if (rhdr->flags & ISCSI_FLAG_CMD_BIDI_UNDERFLOW) + } else if (rhdr->flags & (ISCSI_FLAG_CMD_BIDI_UNDERFLOW | + ISCSI_FLAG_CMD_BIDI_OVERFLOW)) sc->result = (DID_BAD_TARGET << 16) | rhdr->cmd_status; - else if (rhdr->flags & ISCSI_FLAG_CMD_OVERFLOW) - scsi_set_resid(sc, be32_to_cpu(rhdr->residual_count)); out: debug_scsi("done [sc %lx res %d itt 0x%x]\n", -- cgit v1.2.3-59-g8ed1b From 004d6530f83bee43a55b51bb5960db96e7ae0ffa Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Thu, 13 Dec 2007 12:43:23 -0600 Subject: [SCSI] iscsi_tcp, libiscsi: initial AHS Support at libiscsi generic code - currently code assumes a storage space of pdu header is allocated at llds ctask and is pointed to by iscsi_cmd_task->hdr. Here I add a hdr_max field pertaining to that storage, and an hdr_len that accumulates the current use of the pdu-header. - Add an iscsi_next_hdr() inline which returns the next free space to write new Header at. Also iscsi_next_hdr() is used to retrieve the address at which to write the header-digest. - Add iscsi_add_hdr(length). What the user do is calls iscsi_next_hdr() for address of the new header, than calls iscsi_add_hdr(length) with the size of the new header. iscsi_add_hdr() will check if space is available and update to the new size. length must be padded according to standard. - Add 2 padding inline helpers thanks to Olaf. Current patch does not use them but Following patches will. Also moved definition of ISCSI_PAD_LEN to iscsi_proto.h which had PAD_WORD_LEN that was never used anywhere. - Let iscsi_prep_scsi_cmd_pdu() signal an Error return since now it is possible that it will fail. - I was tired of yet again writing a "this is a digest" comment next to sizeof(__u32) so I defined a new ISCSI_DIGEST_SIZE. Now I don't need any comments. Changed all places that used sizeof(__u32) or "4" in connection to a digest. iscsi_tcp specific code - At struct iscsi_tcp_cmd_task allocate maximum space allowed in standard for all headers following the iscsi_cmd header. and mark it so in iscsi_tcp_session_create() - At iscsi_send_cmd_hdr() retrieve the correct headers size and write header digest at iscsi_next_hdr(). Signed-off-by: Boaz Harrosh Signed-off-by: Olaf Kirch Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 16 ++++++++-------- drivers/scsi/iscsi_tcp.h | 13 +++++++------ drivers/scsi/libiscsi.c | 41 +++++++++++++++++++++++++++++++++++++++-- include/scsi/iscsi_proto.h | 10 +++++++++- include/scsi/libiscsi.h | 33 +++++++++++++++++++++++++++++++-- 5 files changed, 94 insertions(+), 19 deletions(-) diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index fd88777df28b..491845f18710 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -113,7 +113,7 @@ iscsi_hdr_digest(struct iscsi_conn *conn, struct iscsi_buf *buf, struct iscsi_tcp_conn *tcp_conn = conn->dd_data; crypto_hash_digest(&tcp_conn->tx_hash, &buf->sg, buf->sg.length, crc); - buf->sg.length += sizeof(u32); + buf->sg.length += ISCSI_DIGEST_SIZE; } /* @@ -220,6 +220,7 @@ static inline int iscsi_tcp_chunk_done(struct iscsi_chunk *chunk) { static unsigned char padbuf[ISCSI_PAD_LEN]; + unsigned int pad; if (chunk->copied < chunk->size) { iscsi_tcp_chunk_map(chunk); @@ -243,10 +244,8 @@ iscsi_tcp_chunk_done(struct iscsi_chunk *chunk) } /* Do we need to handle padding? */ - if (chunk->total_copied & (ISCSI_PAD_LEN-1)) { - unsigned int pad; - - pad = ISCSI_PAD_LEN - (chunk->total_copied & (ISCSI_PAD_LEN-1)); + pad = iscsi_padding(chunk->total_copied); + if (pad != 0) { debug_tcp("consume %d pad bytes\n", pad); chunk->total_size += pad; chunk->size = pad; @@ -1385,11 +1384,11 @@ iscsi_send_cmd_hdr(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) } iscsi_buf_init_iov(&tcp_ctask->headbuf, (char*)ctask->hdr, - sizeof(struct iscsi_hdr)); + ctask->hdr_len); if (conn->hdrdgst_en) iscsi_hdr_digest(conn, &tcp_ctask->headbuf, - (u8*)tcp_ctask->hdrext); + iscsi_next_hdr(ctask)); tcp_ctask->xmstate &= ~XMSTATE_CMD_HDR_INIT; tcp_ctask->xmstate |= XMSTATE_CMD_HDR_XMIT; } @@ -2176,7 +2175,8 @@ iscsi_tcp_session_create(struct iscsi_transport *iscsit, struct iscsi_cmd_task *ctask = session->cmds[cmd_i]; struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; - ctask->hdr = &tcp_ctask->hdr; + ctask->hdr = &tcp_ctask->hdr.cmd_hdr; + ctask->hdr_max = sizeof(tcp_ctask->hdr) - ISCSI_DIGEST_SIZE; } for (cmd_i = 0; cmd_i < session->mgmtpool_max; cmd_i++) { diff --git a/drivers/scsi/iscsi_tcp.h b/drivers/scsi/iscsi_tcp.h index f1c541151100..eb3784f949fd 100644 --- a/drivers/scsi/iscsi_tcp.h +++ b/drivers/scsi/iscsi_tcp.h @@ -41,7 +41,6 @@ #define XMSTATE_IMM_HDR_INIT 0x1000 #define XMSTATE_SOL_HDR_INIT 0x2000 -#define ISCSI_PAD_LEN 4 #define ISCSI_SG_TABLESIZE SG_ALL #define ISCSI_TCP_MAX_CMD_LEN 16 @@ -130,14 +129,14 @@ struct iscsi_buf { struct iscsi_data_task { struct iscsi_data hdr; /* PDU */ - char hdrext[sizeof(__u32)]; /* Header-Digest */ + char hdrext[ISCSI_DIGEST_SIZE];/* Header-Digest */ struct iscsi_buf digestbuf; /* digest buffer */ uint32_t digest; /* data digest */ }; struct iscsi_tcp_mgmt_task { struct iscsi_hdr hdr; - char hdrext[sizeof(__u32)]; /* Header-Digest */ + char hdrext[ISCSI_DIGEST_SIZE]; /* Header-Digest */ int xmstate; /* mgmt xmit progress */ struct iscsi_buf headbuf; /* header buffer */ struct iscsi_buf sendbuf; /* in progress buffer */ @@ -159,9 +158,11 @@ struct iscsi_r2t_info { }; struct iscsi_tcp_cmd_task { - struct iscsi_cmd hdr; - char hdrext[4*sizeof(__u16)+ /* AHS */ - sizeof(__u32)]; /* HeaderDigest */ + struct iscsi_hdr_buff { + struct iscsi_cmd cmd_hdr; + char hdrextbuf[ISCSI_MAX_AHS_SIZE + + ISCSI_DIGEST_SIZE]; + } hdr; char pad[ISCSI_PAD_LEN]; int pad_count; /* padded bytes */ struct iscsi_buf headbuf; /* header buf (xmit) */ diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 0beb4c620962..0d7914fd8ef3 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -37,6 +37,9 @@ #include #include +static void fail_command(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask, + int err); + struct iscsi_session * class_to_transport_session(struct iscsi_cls_session *cls_session) { @@ -122,6 +125,20 @@ void iscsi_prep_unsolicit_data_pdu(struct iscsi_cmd_task *ctask, } EXPORT_SYMBOL_GPL(iscsi_prep_unsolicit_data_pdu); +static int iscsi_add_hdr(struct iscsi_cmd_task *ctask, unsigned len) +{ + unsigned exp_len = ctask->hdr_len + len; + + if (exp_len > ctask->hdr_max) { + WARN_ON(1); + return -EINVAL; + } + + WARN_ON(len & (ISCSI_PAD_LEN - 1)); /* caller must pad the AHS */ + ctask->hdr_len = exp_len; + return 0; +} + /** * iscsi_prep_scsi_cmd_pdu - prep iscsi scsi cmd pdu * @ctask: iscsi cmd task @@ -129,13 +146,19 @@ EXPORT_SYMBOL_GPL(iscsi_prep_unsolicit_data_pdu); * Prep basic iSCSI PDU fields for a scsi cmd pdu. The LLD should set * fields like dlength or final based on how much data it sends */ -static void iscsi_prep_scsi_cmd_pdu(struct iscsi_cmd_task *ctask) +static int iscsi_prep_scsi_cmd_pdu(struct iscsi_cmd_task *ctask) { struct iscsi_conn *conn = ctask->conn; struct iscsi_session *session = conn->session; struct iscsi_cmd *hdr = ctask->hdr; struct scsi_cmnd *sc = ctask->sc; + unsigned hdrlength; + int rc; + ctask->hdr_len = 0; + rc = iscsi_add_hdr(ctask, sizeof(*hdr)); + if (rc) + return rc; hdr->opcode = ISCSI_OP_SCSI_CMD; hdr->flags = ISCSI_ATTR_SIMPLE; int_to_scsilun(sc->device->lun, (struct scsi_lun *)hdr->lun); @@ -199,6 +222,15 @@ static void iscsi_prep_scsi_cmd_pdu(struct iscsi_cmd_task *ctask) hdr->flags |= ISCSI_FLAG_CMD_READ; } + /* calculate size of additional header segments (AHSs) */ + hdrlength = ctask->hdr_len - sizeof(*hdr); + + WARN_ON(hdrlength & (ISCSI_PAD_LEN-1)); + hdrlength /= ISCSI_PAD_LEN; + + WARN_ON(hdrlength >= 256); + hdr->hlength = hdrlength & 0xFF; + conn->scsicmd_pdus_cnt++; debug_scsi("iscsi prep [%s cid %d sc %p cdb 0x%x itt 0x%x len %d " @@ -206,6 +238,7 @@ static void iscsi_prep_scsi_cmd_pdu(struct iscsi_cmd_task *ctask) sc->sc_data_direction == DMA_TO_DEVICE ? "write" : "read", conn->id, sc, sc->cmnd[0], ctask->itt, scsi_bufflen(sc), session->cmdsn, session->max_cmdsn - session->exp_cmdsn + 1); + return 0; } /** @@ -744,7 +777,10 @@ check_mgmt: conn->ctask = list_entry(conn->xmitqueue.next, struct iscsi_cmd_task, running); - iscsi_prep_scsi_cmd_pdu(conn->ctask); + if (iscsi_prep_scsi_cmd_pdu(conn->ctask)) { + fail_command(conn, conn->ctask, DID_ABORT << 16); + continue; + } conn->session->tt->init_cmd_task(conn->ctask); conn->ctask->state = ISCSI_TASK_RUNNING; list_move_tail(conn->xmitqueue.next, &conn->run_list); @@ -1534,6 +1570,7 @@ iscsi_session_setup(struct iscsi_transport *iscsit, if (cmd_task_size) ctask->dd_data = &ctask[1]; ctask->itt = cmd_i; + ctask->hdr_max = sizeof(struct iscsi_cmd); INIT_LIST_HEAD(&ctask->running); } diff --git a/include/scsi/iscsi_proto.h b/include/scsi/iscsi_proto.h index 751c81eaa7f3..6947082eee6d 100644 --- a/include/scsi/iscsi_proto.h +++ b/include/scsi/iscsi_proto.h @@ -27,7 +27,7 @@ #define ISCSI_LISTEN_PORT 3260 /* Padding word length */ -#define PAD_WORD_LEN 4 +#define ISCSI_PAD_LEN 4 /* * useful common(control and data pathes) macro @@ -147,6 +147,14 @@ struct iscsi_rlength_ahdr { __be32 read_length; }; +/* Extended CDB AHS */ +struct iscsi_ecdb_ahdr { + __be16 ahslength; /* CDB length - 15, including reserved byte */ + uint8_t ahstype; + uint8_t reserved; + uint8_t ecdb[260 - 16]; /* 4-byte aligned extended CDB spillover */ +}; + /* SCSI Response Header */ struct iscsi_cmd_rsp { uint8_t opcode; diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index e1fb3d0927b0..a9a9e869188d 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -78,6 +78,9 @@ enum { #define ISCSI_ADDRESS_BUF_LEN 64 enum { + /* this is the maximum possible storage for AHSs */ + ISCSI_MAX_AHS_SIZE = sizeof(struct iscsi_ecdb_ahdr) + + sizeof(struct iscsi_rlength_ahdr), ISCSI_DIGEST_SIZE = sizeof(__u32), }; @@ -102,10 +105,13 @@ enum { struct iscsi_cmd_task { /* - * Becuae LLDs allocate their hdr differently, this is a pointer to - * that storage. It must be setup at session creation time. + * Because LLDs allocate their hdr differently, this is a pointer + * and length to that storage. It must be setup at session + * creation time. */ struct iscsi_cmd *hdr; + unsigned short hdr_max; + unsigned short hdr_len; /* accumulated size of hdr used */ int itt; /* this ITT */ uint32_t unsol_datasn; @@ -124,6 +130,11 @@ struct iscsi_cmd_task { void *dd_data; /* driver/transport data */ }; +static inline void* iscsi_next_hdr(struct iscsi_cmd_task *ctask) +{ + return (void*)ctask->hdr + ctask->hdr_len; +} + struct iscsi_conn { struct iscsi_cls_conn *cls_conn; /* ptr to class connection */ void *dd_data; /* iscsi_transport data */ @@ -342,4 +353,22 @@ extern void iscsi_requeue_ctask(struct iscsi_cmd_task *ctask); extern void iscsi_pool_free(struct iscsi_queue *, void **); extern int iscsi_pool_init(struct iscsi_queue *, int, void ***, int); +/* + * inline functions to deal with padding. + */ +static inline unsigned int +iscsi_padded(unsigned int len) +{ + return (len + ISCSI_PAD_LEN - 1) & ~(ISCSI_PAD_LEN - 1); +} + +static inline unsigned int +iscsi_padding(unsigned int len) +{ + len &= (ISCSI_PAD_LEN - 1); + if (len) + len = ISCSI_PAD_LEN - len; + return len; +} + #endif -- cgit v1.2.3-59-g8ed1b From 38ad03de3fd350e683213ddf898a7049534628a8 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Thu, 13 Dec 2007 12:43:24 -0600 Subject: [SCSI] libiscsi,iser: patch for AHS support - The default initialization of hdr_max is the minimum - sizeof(struct iscsi_cmd) - Once this patch goes into iser the default initialization at libiscsi can be removed. - This is not yet full support for AHSs at iser end. But it should be easy. Just allocate more space at iser_desc right after iscsi_hdr. Than at transmission time use ctask->hdr_len to retrieve the total size of all iscsi pdu headers. See previous patch at iscsi_tcp.[ch] Signed-off-by: Boaz Harrosh Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/infiniband/ulp/iser/iscsi_iser.c | 1 + drivers/scsi/libiscsi.c | 1 - 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c index 2eadb6d0ad8b..a2622f4bd858 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.c +++ b/drivers/infiniband/ulp/iser/iscsi_iser.c @@ -400,6 +400,7 @@ iscsi_iser_session_create(struct iscsi_transport *iscsit, ctask = session->cmds[i]; iser_ctask = ctask->dd_data; ctask->hdr = (struct iscsi_cmd *)&iser_ctask->desc.iscsi_header; + ctask->hdr_max = sizeof(iser_ctask->desc.iscsi_header); } for (i = 0; i < session->mgmtpool_max; i++) { diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 0d7914fd8ef3..59365864c989 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1570,7 +1570,6 @@ iscsi_session_setup(struct iscsi_transport *iscsit, if (cmd_task_size) ctask->dd_data = &ctask[1]; ctask->itt = cmd_i; - ctask->hdr_max = sizeof(struct iscsi_cmd); INIT_LIST_HEAD(&ctask->running); } -- cgit v1.2.3-59-g8ed1b From 6320377fd94316e58f75d0be6f6e7a644950a4ee Mon Sep 17 00:00:00 2001 From: Olaf Kirch Date: Thu, 13 Dec 2007 12:43:25 -0600 Subject: [SCSI] libiscsi, iscsi_tcp: iscsi pool cleanup iscsi_pool_init simplified iscsi_pool_init currently has a lot of duplicate kfree() calls it does when some allocation fails. This patch simplifies the code a little by using iscsi_pool_free to tear down the pool in case of an error. iscsi_pool_init also returns a copy of the item array to the caller. Not all callers use this array, so we make it optional. Instead of allocating a second array and return that, allocate just one array, of twice the size. Update users of iscsi_pool_{init,free} This patch drops the (now useless) second argument to iscsi_pool_free, and updates all callers. It also removes the ctask->r2ts array, which was never used anyway. Since the items argument to iscsi_pool_init is now optional, we can pass NULL instead. Signed-off-by: Olaf Kirch Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 12 +++----- drivers/scsi/iscsi_tcp.h | 3 +- drivers/scsi/libiscsi.c | 75 ++++++++++++++++++++++++++---------------------- include/scsi/libiscsi.h | 10 +++---- 4 files changed, 50 insertions(+), 50 deletions(-) diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 491845f18710..f79a457099e6 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -1998,8 +1998,7 @@ iscsi_r2tpool_alloc(struct iscsi_session *session) */ /* R2T pool */ - if (iscsi_pool_init(&tcp_ctask->r2tpool, session->max_r2t * 4, - (void***)&tcp_ctask->r2ts, + if (iscsi_pool_init(&tcp_ctask->r2tpool, session->max_r2t * 4, NULL, sizeof(struct iscsi_r2t_info))) { goto r2t_alloc_fail; } @@ -2008,8 +2007,7 @@ iscsi_r2tpool_alloc(struct iscsi_session *session) tcp_ctask->r2tqueue = kfifo_alloc( session->max_r2t * 4 * sizeof(void*), GFP_KERNEL, NULL); if (tcp_ctask->r2tqueue == ERR_PTR(-ENOMEM)) { - iscsi_pool_free(&tcp_ctask->r2tpool, - (void**)tcp_ctask->r2ts); + iscsi_pool_free(&tcp_ctask->r2tpool); goto r2t_alloc_fail; } } @@ -2022,8 +2020,7 @@ r2t_alloc_fail: struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; kfifo_free(tcp_ctask->r2tqueue); - iscsi_pool_free(&tcp_ctask->r2tpool, - (void**)tcp_ctask->r2ts); + iscsi_pool_free(&tcp_ctask->r2tpool); } return -ENOMEM; } @@ -2038,8 +2035,7 @@ iscsi_r2tpool_free(struct iscsi_session *session) struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; kfifo_free(tcp_ctask->r2tqueue); - iscsi_pool_free(&tcp_ctask->r2tpool, - (void**)tcp_ctask->r2ts); + iscsi_pool_free(&tcp_ctask->r2tpool); } } diff --git a/drivers/scsi/iscsi_tcp.h b/drivers/scsi/iscsi_tcp.h index eb3784f949fd..d49d87611e82 100644 --- a/drivers/scsi/iscsi_tcp.h +++ b/drivers/scsi/iscsi_tcp.h @@ -175,9 +175,8 @@ struct iscsi_tcp_cmd_task { uint32_t exp_datasn; /* expected target's R2TSN/DataSN */ int data_offset; struct iscsi_r2t_info *r2t; /* in progress R2T */ - struct iscsi_queue r2tpool; + struct iscsi_pool r2tpool; struct kfifo *r2tqueue; - struct iscsi_r2t_info **r2ts; int digest_count; uint32_t immdigest; /* for imm data */ struct iscsi_buf immbuf; /* for imm data digest */ diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 59365864c989..d43f909a022c 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1413,59 +1413,64 @@ done: } EXPORT_SYMBOL_GPL(iscsi_eh_device_reset); +/* + * Pre-allocate a pool of @max items of @item_size. By default, the pool + * should be accessed via kfifo_{get,put} on q->queue. + * Optionally, the caller can obtain the array of object pointers + * by passing in a non-NULL @items pointer + */ int -iscsi_pool_init(struct iscsi_queue *q, int max, void ***items, int item_size) +iscsi_pool_init(struct iscsi_pool *q, int max, void ***items, int item_size) { - int i; + int i, num_arrays = 1; - *items = kmalloc(max * sizeof(void*), GFP_KERNEL); - if (*items == NULL) - return -ENOMEM; + memset(q, 0, sizeof(*q)); q->max = max; - q->pool = kmalloc(max * sizeof(void*), GFP_KERNEL); - if (q->pool == NULL) { - kfree(*items); - return -ENOMEM; - } + + /* If the user passed an items pointer, he wants a copy of + * the array. */ + if (items) + num_arrays++; + q->pool = kzalloc(num_arrays * max * sizeof(void*), GFP_KERNEL); + if (q->pool == NULL) + goto enomem; q->queue = kfifo_init((void*)q->pool, max * sizeof(void*), GFP_KERNEL, NULL); - if (q->queue == ERR_PTR(-ENOMEM)) { - kfree(q->pool); - kfree(*items); - return -ENOMEM; - } + if (q->queue == ERR_PTR(-ENOMEM)) + goto enomem; for (i = 0; i < max; i++) { - q->pool[i] = kmalloc(item_size, GFP_KERNEL); + q->pool[i] = kzalloc(item_size, GFP_KERNEL); if (q->pool[i] == NULL) { - int j; - - for (j = 0; j < i; j++) - kfree(q->pool[j]); - - kfifo_free(q->queue); - kfree(q->pool); - kfree(*items); - return -ENOMEM; + q->max = i; + goto enomem; } - memset(q->pool[i], 0, item_size); - (*items)[i] = q->pool[i]; __kfifo_put(q->queue, (void*)&q->pool[i], sizeof(void*)); } + + if (items) { + *items = q->pool + max; + memcpy(*items, q->pool, max * sizeof(void *)); + } + return 0; + +enomem: + iscsi_pool_free(q); + return -ENOMEM; } EXPORT_SYMBOL_GPL(iscsi_pool_init); -void iscsi_pool_free(struct iscsi_queue *q, void **items) +void iscsi_pool_free(struct iscsi_pool *q) { int i; for (i = 0; i < q->max; i++) - kfree(items[i]); - kfree(q->pool); - kfree(items); + kfree(q->pool[i]); + if (q->pool) + kfree(q->pool); } EXPORT_SYMBOL_GPL(iscsi_pool_free); @@ -1610,9 +1615,9 @@ module_put: cls_session_fail: scsi_remove_host(shost); add_host_fail: - iscsi_pool_free(&session->mgmtpool, (void**)session->mgmt_cmds); + iscsi_pool_free(&session->mgmtpool); mgmtpool_alloc_fail: - iscsi_pool_free(&session->cmdpool, (void**)session->cmds); + iscsi_pool_free(&session->cmdpool); cmdpool_alloc_fail: scsi_host_put(shost); return NULL; @@ -1635,8 +1640,8 @@ void iscsi_session_teardown(struct iscsi_cls_session *cls_session) iscsi_unblock_session(cls_session); scsi_remove_host(shost); - iscsi_pool_free(&session->mgmtpool, (void**)session->mgmt_cmds); - iscsi_pool_free(&session->cmdpool, (void**)session->cmds); + iscsi_pool_free(&session->mgmtpool); + iscsi_pool_free(&session->cmdpool); kfree(session->password); kfree(session->password_in); diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index a9a9e869188d..4b3e3c15121a 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -215,7 +215,7 @@ struct iscsi_conn { uint32_t eh_abort_cnt; }; -struct iscsi_queue { +struct iscsi_pool { struct kfifo *queue; /* FIFO Queue */ void **pool; /* Pool of elements */ int max; /* Max number of elements */ @@ -274,10 +274,10 @@ struct iscsi_session { int cmds_max; /* size of cmds array */ struct iscsi_cmd_task **cmds; /* Original Cmds arr */ - struct iscsi_queue cmdpool; /* PDU's pool */ + struct iscsi_pool cmdpool; /* PDU's pool */ int mgmtpool_max; /* size of mgmt array */ struct iscsi_mgmt_task **mgmt_cmds; /* Original mgmt arr */ - struct iscsi_queue mgmtpool; /* Mgmt PDU's pool */ + struct iscsi_pool mgmtpool; /* Mgmt PDU's pool */ }; /* @@ -350,8 +350,8 @@ extern void iscsi_requeue_ctask(struct iscsi_cmd_task *ctask); /* * generic helpers */ -extern void iscsi_pool_free(struct iscsi_queue *, void **); -extern int iscsi_pool_init(struct iscsi_queue *, int, void ***, int); +extern void iscsi_pool_free(struct iscsi_pool *); +extern int iscsi_pool_init(struct iscsi_pool *, int, void ***, int); /* * inline functions to deal with padding. -- cgit v1.2.3-59-g8ed1b From b3a7ea8d50f6028964b468d13a095dfb2508b2fb Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 13 Dec 2007 12:43:26 -0600 Subject: [SCSI] libiscsi: do not block session during logout There is not need to block the session during logout. Since we are going to fail the commands that were blocked just fail them immediately instead. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/infiniband/ulp/iser/iser_initiator.c | 4 +- drivers/scsi/iscsi_tcp.c | 4 +- drivers/scsi/libiscsi.c | 153 +++++++++++++++------------ include/scsi/libiscsi.h | 2 + include/scsi/scsi_transport_iscsi.h | 1 + 5 files changed, 88 insertions(+), 76 deletions(-) diff --git a/drivers/infiniband/ulp/iser/iser_initiator.c b/drivers/infiniband/ulp/iser/iser_initiator.c index a6f2303ed14a..47f716ca0026 100644 --- a/drivers/infiniband/ulp/iser/iser_initiator.c +++ b/drivers/infiniband/ulp/iser/iser_initiator.c @@ -621,9 +621,7 @@ void iser_snd_completion(struct iser_desc *tx_desc) struct iscsi_session *session = conn->session; spin_lock(&conn->session->lock); - list_del(&mtask->running); - __kfifo_put(session->mgmtpool.queue, (void*)&mtask, - sizeof(void*)); + iscsi_free_mgmt_task(conn, mtask); spin_unlock(&session->lock); } } diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index f79a457099e6..90eae8e0d978 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -1349,9 +1349,7 @@ iscsi_tcp_mtask_xmit(struct iscsi_conn *conn, struct iscsi_mgmt_task *mtask) struct iscsi_session *session = conn->session; spin_lock_bh(&session->lock); - list_del(&conn->mtask->running); - __kfifo_put(session->mgmtpool.queue, (void*)&conn->mtask, - sizeof(void*)); + iscsi_free_mgmt_task(conn, mtask); spin_unlock_bh(&session->lock); } return 0; diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index d43f909a022c..b7a2b9ad3a97 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -37,9 +37,6 @@ #include #include -static void fail_command(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask, - int err); - struct iscsi_session * class_to_transport_session(struct iscsi_cls_session *cls_session) { @@ -274,6 +271,53 @@ static void __iscsi_put_ctask(struct iscsi_cmd_task *ctask) iscsi_complete_command(ctask); } +/* + * session lock must be held + */ +static void fail_command(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask, + int err) +{ + struct scsi_cmnd *sc; + + sc = ctask->sc; + if (!sc) + return; + + if (ctask->state == ISCSI_TASK_PENDING) + /* + * cmd never made it to the xmit thread, so we should not count + * the cmd in the sequencing + */ + conn->session->queued_cmdsn--; + else + conn->session->tt->cleanup_cmd_task(conn, ctask); + + sc->result = err; + scsi_set_resid(sc, scsi_bufflen(sc)); + if (conn->ctask == ctask) + conn->ctask = NULL; + /* release ref from queuecommand */ + __iscsi_put_ctask(ctask); +} + +/** + * iscsi_free_mgmt_task - return mgmt task back to pool + * @conn: iscsi connection + * @mtask: mtask + * + * Must be called with session lock. + */ +void iscsi_free_mgmt_task(struct iscsi_conn *conn, + struct iscsi_mgmt_task *mtask) +{ + list_del_init(&mtask->running); + if (conn->login_mtask == mtask) + return; + __kfifo_put(conn->session->mgmtpool.queue, + (void*)&mtask, sizeof(void*)); +} +EXPORT_SYMBOL_GPL(iscsi_free_mgmt_task); + /** * iscsi_cmd_rsp - SCSI Command Response processing * @conn: iscsi connection @@ -464,10 +508,7 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, */ if (iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen)) rc = ISCSI_ERR_CONN_FAILED; - list_del_init(&mtask->running); - if (conn->login_mtask != mtask) - __kfifo_put(session->mgmtpool.queue, - (void*)&mtask, sizeof(void*)); + iscsi_free_mgmt_task(conn, mtask); break; case ISCSI_OP_SCSI_TMFUNC_RSP: if (datalen) { @@ -476,6 +517,7 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, } iscsi_tmf_rsp(conn, hdr); + iscsi_free_mgmt_task(conn, mtask); break; case ISCSI_OP_NOOP_IN: if (hdr->ttt != cpu_to_be32(ISCSI_RESERVED_TAG) || datalen) { @@ -486,9 +528,7 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, if (iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen)) rc = ISCSI_ERR_CONN_FAILED; - list_del_init(&mtask->running); - __kfifo_put(session->mgmtpool.queue, - (void*)&mtask, sizeof(void*)); + iscsi_free_mgmt_task(conn, mtask); break; default: rc = ISCSI_ERR_BAD_OPCODE; @@ -650,14 +690,12 @@ static void iscsi_prep_mtask(struct iscsi_conn *conn, static int iscsi_xmit_mtask(struct iscsi_conn *conn) { struct iscsi_hdr *hdr = conn->mtask->hdr; - int rc, was_logout = 0; + int rc; + if ((hdr->opcode & ISCSI_OPCODE_MASK) == ISCSI_OP_LOGOUT) + conn->session->state = ISCSI_STATE_LOGGING_OUT; spin_unlock_bh(&conn->session->lock); - if ((hdr->opcode & ISCSI_OPCODE_MASK) == ISCSI_OP_LOGOUT) { - conn->session->state = ISCSI_STATE_IN_RECOVERY; - iscsi_block_session(session_to_cls(conn->session)); - was_logout = 1; - } + rc = conn->session->tt->xmit_mgmt_task(conn, conn->mtask); spin_lock_bh(&conn->session->lock); if (rc) @@ -665,11 +703,6 @@ static int iscsi_xmit_mtask(struct iscsi_conn *conn) /* done with this in-progress mtask */ conn->mtask = NULL; - - if (was_logout) { - set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx); - return -ENODATA; - } return 0; } @@ -763,6 +796,12 @@ check_mgmt: while (!list_empty(&conn->mgmtqueue)) { conn->mtask = list_entry(conn->mgmtqueue.next, struct iscsi_mgmt_task, running); + if (conn->session->state == ISCSI_STATE_LOGGING_OUT) { + iscsi_free_mgmt_task(conn, conn->mtask); + conn->mtask = NULL; + continue; + } + iscsi_prep_mtask(conn, conn->mtask); list_move_tail(conn->mgmtqueue.next, &conn->mgmt_run_list); rc = iscsi_xmit_mtask(conn); @@ -777,6 +816,10 @@ check_mgmt: conn->ctask = list_entry(conn->xmitqueue.next, struct iscsi_cmd_task, running); + if (conn->session->state == ISCSI_STATE_LOGGING_OUT) { + fail_command(conn, conn->ctask, DID_NO_CONNECT << 16); + continue; + } if (iscsi_prep_scsi_cmd_pdu(conn->ctask)) { fail_command(conn, conn->ctask, DID_ABORT << 16); continue; @@ -800,6 +843,12 @@ check_mgmt: if (conn->session->fast_abort && conn->tmf_state != TMF_INITIAL) break; + /* + * we always do fastlogout - conn stop code will clean up. + */ + if (conn->session->state == ISCSI_STATE_LOGGING_OUT) + break; + conn->ctask = list_entry(conn->requeue.next, struct iscsi_cmd_task, running); conn->ctask->state = ISCSI_TASK_RUNNING; @@ -842,6 +891,7 @@ enum { FAILURE_SESSION_TERMINATE, FAILURE_SESSION_IN_RECOVERY, FAILURE_SESSION_RECOVERY_TIMEOUT, + FAILURE_SESSION_LOGGING_OUT, }; int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) @@ -879,12 +929,19 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) goto reject; } - if (session->state == ISCSI_STATE_RECOVERY_FAILED) + switch (session->state) { + case ISCSI_STATE_RECOVERY_FAILED: reason = FAILURE_SESSION_RECOVERY_TIMEOUT; - else if (session->state == ISCSI_STATE_TERMINATE) + break; + case ISCSI_STATE_TERMINATE: reason = FAILURE_SESSION_TERMINATE; - else + break; + case ISCSI_STATE_LOGGING_OUT: + reason = FAILURE_SESSION_LOGGING_OUT; + break; + default: reason = FAILURE_SESSION_FREED; + } goto fault; } @@ -1120,44 +1177,9 @@ static int iscsi_exec_task_mgmt_fn(struct iscsi_conn *conn, if (age != session->age || session->state != ISCSI_STATE_LOGGED_IN) return -ENOTCONN; - - if (!list_empty(&mtask->running)) { - list_del_init(&mtask->running); - __kfifo_put(session->mgmtpool.queue, (void*)&mtask, - sizeof(void*)); - } return 0; } -/* - * session lock must be held - */ -static void fail_command(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask, - int err) -{ - struct scsi_cmnd *sc; - - sc = ctask->sc; - if (!sc) - return; - - if (ctask->state == ISCSI_TASK_PENDING) - /* - * cmd never made it to the xmit thread, so we should not count - * the cmd in the sequencing - */ - conn->session->queued_cmdsn--; - else - conn->session->tt->cleanup_cmd_task(conn, ctask); - - sc->result = err; - scsi_set_resid(sc, scsi_bufflen(sc)); - if (conn->ctask == ctask) - conn->ctask = NULL; - /* release ref from queuecommand */ - __iscsi_put_ctask(ctask); -} - /* * Fail commands. session lock held and recv side suspended and xmit * thread flushed @@ -1837,22 +1859,13 @@ flush_control_queues(struct iscsi_session *session, struct iscsi_conn *conn) /* handle pending */ list_for_each_entry_safe(mtask, tmp, &conn->mgmtqueue, running) { debug_scsi("flushing pending mgmt task itt 0x%x\n", mtask->itt); - list_del_init(&mtask->running); - if (mtask == conn->login_mtask) - continue; - __kfifo_put(session->mgmtpool.queue, (void*)&mtask, - sizeof(void*)); + iscsi_free_mgmt_task(conn, mtask); } /* handle running */ list_for_each_entry_safe(mtask, tmp, &conn->mgmt_run_list, running) { debug_scsi("flushing running mgmt task itt 0x%x\n", mtask->itt); - list_del_init(&mtask->running); - - if (mtask == conn->login_mtask) - continue; - __kfifo_put(session->mgmtpool.queue, (void*)&mtask, - sizeof(void*)); + iscsi_free_mgmt_task(conn, mtask); } conn->mtask = NULL; diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index 4b3e3c15121a..d68f74523f2e 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -346,6 +346,8 @@ extern int __iscsi_complete_pdu(struct iscsi_conn *, struct iscsi_hdr *, extern int iscsi_verify_itt(struct iscsi_conn *, struct iscsi_hdr *, uint32_t *); extern void iscsi_requeue_ctask(struct iscsi_cmd_task *ctask); +extern void iscsi_free_mgmt_task(struct iscsi_conn *conn, + struct iscsi_mgmt_task *mtask); /* * generic helpers diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h index 7ff6199cbd55..b8d97bd20f6e 100644 --- a/include/scsi/scsi_transport_iscsi.h +++ b/include/scsi/scsi_transport_iscsi.h @@ -176,6 +176,7 @@ struct iscsi_cls_conn { #define ISCSI_STATE_TERMINATE 4 #define ISCSI_STATE_IN_RECOVERY 5 #define ISCSI_STATE_RECOVERY_FAILED 6 +#define ISCSI_STATE_LOGGING_OUT 7 struct iscsi_cls_session { struct list_head sess_list; /* item in session_list */ -- cgit v1.2.3-59-g8ed1b From d8bf541e657824cb03effd726ac96e2f4dcf58a5 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 13 Dec 2007 12:43:27 -0600 Subject: [SCSI] iscsi class: Use our own workq instead of common system one. There is just too much going on through the common workq and something like a scsi device removal through sysfs affects how long it will take to recover the transport, mark it as failed, or shut it down gracefully. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_iscsi.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 75d3069ecaa0..9cc2cc8e87b3 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -50,6 +50,7 @@ struct iscsi_internal { }; static atomic_t iscsi_session_nr; /* sysfs session id for next new session */ +static struct workqueue_struct *iscsi_eh_timer_workq; /* * list of registered transports and lock that must @@ -252,7 +253,7 @@ static void session_recovery_timedout(struct work_struct *work) void iscsi_unblock_session(struct iscsi_cls_session *session) { if (!cancel_delayed_work(&session->recovery_work)) - flush_scheduled_work(); + flush_workqueue(iscsi_eh_timer_workq); scsi_target_unblock(&session->dev); } EXPORT_SYMBOL_GPL(iscsi_unblock_session); @@ -260,8 +261,8 @@ EXPORT_SYMBOL_GPL(iscsi_unblock_session); void iscsi_block_session(struct iscsi_cls_session *session) { scsi_target_block(&session->dev); - schedule_delayed_work(&session->recovery_work, - session->recovery_tmo * HZ); + queue_delayed_work(iscsi_eh_timer_workq, &session->recovery_work, + session->recovery_tmo * HZ); } EXPORT_SYMBOL_GPL(iscsi_block_session); @@ -357,7 +358,7 @@ void iscsi_remove_session(struct iscsi_cls_session *session) struct iscsi_host *ihost = shost->shost_data; if (!cancel_delayed_work(&session->recovery_work)) - flush_scheduled_work(); + flush_workqueue(iscsi_eh_timer_workq); mutex_lock(&ihost->mutex); list_del(&session->host_list); @@ -1521,8 +1522,14 @@ static __init int iscsi_transport_init(void) goto unregister_session_class; } + iscsi_eh_timer_workq = create_singlethread_workqueue("iscsi_eh"); + if (!iscsi_eh_timer_workq) + goto release_nls; + return 0; +release_nls: + sock_release(nls->sk_socket); unregister_session_class: transport_class_unregister(&iscsi_session_class); unregister_conn_class: @@ -1536,6 +1543,7 @@ unregister_transport_class: static void __exit iscsi_transport_exit(void) { + destroy_workqueue(iscsi_eh_timer_workq); sock_release(nls->sk_socket); transport_class_unregister(&iscsi_connection_class); transport_class_unregister(&iscsi_session_class); -- cgit v1.2.3-59-g8ed1b From bc436b278776d22eb10e7e75bf3e5257d14550a9 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 13 Dec 2007 12:43:28 -0600 Subject: [SCSI] libiscsi: grab eh_mutex during host reset I thought we may not need the eh mutex during host reset, but that is wrong with the new shutdown code. When start_session_recovery sets the state to terminate then drops the session lock. The scsi eh thread could then grab the session lock see that we are terminating and then return failed to scsi-ml. scsi-ml's eh then owns the command and will do whatever it wants with it. But then the iscsi eh thread could grab the session lock and want to complete the scsi commands that we in the LLD, but it no longer owns them and kaboom. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/libiscsi.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index b7a2b9ad3a97..441e351b4456 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1079,17 +1079,19 @@ int iscsi_eh_host_reset(struct scsi_cmnd *sc) struct iscsi_session *session = iscsi_hostdata(host->hostdata); struct iscsi_conn *conn = session->leadconn; + mutex_lock(&session->eh_mutex); spin_lock_bh(&session->lock); if (session->state == ISCSI_STATE_TERMINATE) { failed: debug_scsi("failing host reset: session terminated " "[CID %d age %d]\n", conn->id, session->age); spin_unlock_bh(&session->lock); + mutex_unlock(&session->eh_mutex); return FAILED; } spin_unlock_bh(&session->lock); - + mutex_unlock(&session->eh_mutex); /* * we drop the lock here but the leadconn cannot be destoyed while * we are in the scsi eh @@ -1104,13 +1106,14 @@ failed: if (signal_pending(current)) flush_signals(current); + mutex_lock(&session->eh_mutex); spin_lock_bh(&session->lock); if (session->state == ISCSI_STATE_LOGGED_IN) printk(KERN_INFO "iscsi: host reset succeeded\n"); else goto failed; spin_unlock_bh(&session->lock); - + mutex_unlock(&session->eh_mutex); return SUCCESS; } EXPORT_SYMBOL_GPL(iscsi_eh_host_reset); -- cgit v1.2.3-59-g8ed1b From 2697478903d0ad8bdbf868b1346ae4b891662bb1 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 13 Dec 2007 12:43:29 -0600 Subject: [SCSI] libiscsi: fix shutdown We were using the device delete sysfs file to remove each device then logout. Now in 2.6.21 this will not work because the sysfs delete file returns immediately and does not wait for the device removal to complete. This causes a hang if a cache sync is needed during shutdown. Before .21, that approach had other problems, so this patch fixes the shutdown code so that we remove the target and unbind the session before logging out and shut down the session Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/libiscsi.c | 4 +- drivers/scsi/qla4xxx/ql4_init.c | 4 +- drivers/scsi/qla4xxx/ql4_os.c | 7 +- drivers/scsi/scsi_transport_iscsi.c | 289 +++++++++++++++++++----------------- include/scsi/iscsi_if.h | 7 + include/scsi/iscsi_proto.h | 2 + include/scsi/scsi_transport_iscsi.h | 7 +- 7 files changed, 176 insertions(+), 144 deletions(-) diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 441e351b4456..5205ef2c29b2 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1662,7 +1662,7 @@ void iscsi_session_teardown(struct iscsi_cls_session *cls_session) struct iscsi_session *session = iscsi_hostdata(shost->hostdata); struct module *owner = cls_session->transport->owner; - iscsi_unblock_session(cls_session); + iscsi_remove_session(cls_session); scsi_remove_host(shost); iscsi_pool_free(&session->mgmtpool); @@ -1677,7 +1677,7 @@ void iscsi_session_teardown(struct iscsi_cls_session *cls_session) kfree(session->hwaddress); kfree(session->initiatorname); - iscsi_destroy_session(cls_session); + iscsi_free_session(cls_session); scsi_host_put(shost); module_put(owner); } diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index d692c713416a..cbe0a17ced5f 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -5,6 +5,7 @@ * See LICENSE.qla4xxx for copyright and licensing details. */ +#include #include "ql4_def.h" #include "ql4_glbl.h" #include "ql4_dbg.h" @@ -1305,7 +1306,8 @@ int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, atomic_set(&ddb_entry->relogin_timer, 0); clear_bit(DF_RELOGIN, &ddb_entry->flags); clear_bit(DF_NO_RELOGIN, &ddb_entry->flags); - iscsi_if_create_session_done(ddb_entry->conn); + iscsi_session_event(ddb_entry->sess, + ISCSI_KEVENT_CREATE_SESSION); /* * Change the lun state to READY in case the lun TIMEOUT before * the device came back. diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 89460d27c689..f55b9f7d9396 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -298,8 +298,7 @@ void qla4xxx_destroy_sess(struct ddb_entry *ddb_entry) return; if (ddb_entry->conn) { - iscsi_if_destroy_session_done(ddb_entry->conn); - iscsi_destroy_conn(ddb_entry->conn); + atomic_set(&ddb_entry->state, DDB_STATE_DEAD); iscsi_remove_session(ddb_entry->sess); } iscsi_free_session(ddb_entry->sess); @@ -309,6 +308,7 @@ int qla4xxx_add_sess(struct ddb_entry *ddb_entry) { int err; + ddb_entry->sess->recovery_tmo = ddb_entry->ha->port_down_retry_count; err = iscsi_add_session(ddb_entry->sess, ddb_entry->fw_ddb_index); if (err) { DEBUG2(printk(KERN_ERR "Could not add session.\n")); @@ -321,9 +321,6 @@ int qla4xxx_add_sess(struct ddb_entry *ddb_entry) DEBUG2(printk(KERN_ERR "Could not add connection.\n")); return -ENOMEM; } - - ddb_entry->sess->recovery_tmo = ddb_entry->ha->port_down_retry_count; - iscsi_if_create_session_done(ddb_entry->conn); return 0; } diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 9cc2cc8e87b3..b82139dc4830 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -116,6 +116,8 @@ static struct attribute_group iscsi_transport_group = { .attrs = iscsi_transport_attrs, }; + + static int iscsi_setup_host(struct transport_container *tc, struct device *dev, struct class_device *cdev) { @@ -125,13 +127,30 @@ static int iscsi_setup_host(struct transport_container *tc, struct device *dev, memset(ihost, 0, sizeof(*ihost)); INIT_LIST_HEAD(&ihost->sessions); mutex_init(&ihost->mutex); + + snprintf(ihost->unbind_workq_name, KOBJ_NAME_LEN, "iscsi_unbind_%d", + shost->host_no); + ihost->unbind_workq = create_singlethread_workqueue( + ihost->unbind_workq_name); + if (!ihost->unbind_workq) + return -ENOMEM; + return 0; +} + +static int iscsi_remove_host(struct transport_container *tc, struct device *dev, + struct class_device *cdev) +{ + struct Scsi_Host *shost = dev_to_shost(dev); + struct iscsi_host *ihost = shost->shost_data; + + destroy_workqueue(ihost->unbind_workq); return 0; } static DECLARE_TRANSPORT_CLASS(iscsi_host_class, "iscsi_host", iscsi_setup_host, - NULL, + iscsi_remove_host, NULL); static DECLARE_TRANSPORT_CLASS(iscsi_session_class, @@ -266,6 +285,35 @@ void iscsi_block_session(struct iscsi_cls_session *session) } EXPORT_SYMBOL_GPL(iscsi_block_session); +static void __iscsi_unbind_session(struct work_struct *work) +{ + struct iscsi_cls_session *session = + container_of(work, struct iscsi_cls_session, + unbind_work); + struct Scsi_Host *shost = iscsi_session_to_shost(session); + struct iscsi_host *ihost = shost->shost_data; + + /* Prevent new scans and make sure scanning is not in progress */ + mutex_lock(&ihost->mutex); + if (list_empty(&session->host_list)) { + mutex_unlock(&ihost->mutex); + return; + } + list_del_init(&session->host_list); + mutex_unlock(&ihost->mutex); + + scsi_remove_target(&session->dev); + iscsi_session_event(session, ISCSI_KEVENT_UNBIND_SESSION); +} + +static int iscsi_unbind_session(struct iscsi_cls_session *session) +{ + struct Scsi_Host *shost = iscsi_session_to_shost(session); + struct iscsi_host *ihost = shost->shost_data; + + return queue_work(ihost->unbind_workq, &session->unbind_work); +} + struct iscsi_cls_session * iscsi_alloc_session(struct Scsi_Host *shost, struct iscsi_transport *transport) @@ -282,6 +330,7 @@ iscsi_alloc_session(struct Scsi_Host *shost, INIT_DELAYED_WORK(&session->recovery_work, session_recovery_timedout); INIT_LIST_HEAD(&session->host_list); INIT_LIST_HEAD(&session->sess_list); + INIT_WORK(&session->unbind_work, __iscsi_unbind_session); /* this is released in the dev's release function */ scsi_host_get(shost); @@ -298,6 +347,7 @@ int iscsi_add_session(struct iscsi_cls_session *session, unsigned int target_id) { struct Scsi_Host *shost = iscsi_session_to_shost(session); struct iscsi_host *ihost; + unsigned long flags; int err; ihost = shost->shost_data; @@ -314,9 +364,15 @@ int iscsi_add_session(struct iscsi_cls_session *session, unsigned int target_id) } transport_register_device(&session->dev); + spin_lock_irqsave(&sesslock, flags); + list_add(&session->sess_list, &sesslist); + spin_unlock_irqrestore(&sesslock, flags); + mutex_lock(&ihost->mutex); list_add(&session->host_list, &ihost->sessions); mutex_unlock(&ihost->mutex); + + iscsi_session_event(session, ISCSI_KEVENT_CREATE_SESSION); return 0; release_host: @@ -352,19 +408,58 @@ iscsi_create_session(struct Scsi_Host *shost, } EXPORT_SYMBOL_GPL(iscsi_create_session); +static void iscsi_conn_release(struct device *dev) +{ + struct iscsi_cls_conn *conn = iscsi_dev_to_conn(dev); + struct device *parent = conn->dev.parent; + + kfree(conn); + put_device(parent); +} + +static int iscsi_is_conn_dev(const struct device *dev) +{ + return dev->release == iscsi_conn_release; +} + +static int iscsi_iter_destroy_conn_fn(struct device *dev, void *data) +{ + if (!iscsi_is_conn_dev(dev)) + return 0; + return iscsi_destroy_conn(iscsi_dev_to_conn(dev)); +} + void iscsi_remove_session(struct iscsi_cls_session *session) { struct Scsi_Host *shost = iscsi_session_to_shost(session); struct iscsi_host *ihost = shost->shost_data; + unsigned long flags; + int err; + + spin_lock_irqsave(&sesslock, flags); + list_del(&session->sess_list); + spin_unlock_irqrestore(&sesslock, flags); + /* + * If we are blocked let commands flow again. The lld or iscsi + * layer should set up the queuecommand to fail commands. + */ + iscsi_unblock_session(session); + iscsi_unbind_session(session); + /* + * If the session dropped while removing devices then we need to make + * sure it is not blocked + */ if (!cancel_delayed_work(&session->recovery_work)) flush_workqueue(iscsi_eh_timer_workq); + flush_workqueue(ihost->unbind_workq); - mutex_lock(&ihost->mutex); - list_del(&session->host_list); - mutex_unlock(&ihost->mutex); - - scsi_remove_target(&session->dev); + /* hw iscsi may not have removed all connections from session */ + err = device_for_each_child(&session->dev, NULL, + iscsi_iter_destroy_conn_fn); + if (err) + dev_printk(KERN_ERR, &session->dev, "iscsi: Could not delete " + "all connections for session. Error %d.\n", err); transport_unregister_device(&session->dev); device_del(&session->dev); @@ -373,9 +468,9 @@ EXPORT_SYMBOL_GPL(iscsi_remove_session); void iscsi_free_session(struct iscsi_cls_session *session) { + iscsi_session_event(session, ISCSI_KEVENT_DESTROY_SESSION); put_device(&session->dev); } - EXPORT_SYMBOL_GPL(iscsi_free_session); /** @@ -393,20 +488,6 @@ int iscsi_destroy_session(struct iscsi_cls_session *session) } EXPORT_SYMBOL_GPL(iscsi_destroy_session); -static void iscsi_conn_release(struct device *dev) -{ - struct iscsi_cls_conn *conn = iscsi_dev_to_conn(dev); - struct device *parent = conn->dev.parent; - - kfree(conn); - put_device(parent); -} - -static int iscsi_is_conn_dev(const struct device *dev) -{ - return dev->release == iscsi_conn_release; -} - /** * iscsi_create_conn - create iscsi class connection * @session: iscsi cls session @@ -426,6 +507,7 @@ iscsi_create_conn(struct iscsi_cls_session *session, uint32_t cid) { struct iscsi_transport *transport = session->transport; struct iscsi_cls_conn *conn; + unsigned long flags; int err; conn = kzalloc(sizeof(*conn) + transport->conndata_size, GFP_KERNEL); @@ -454,6 +536,11 @@ iscsi_create_conn(struct iscsi_cls_session *session, uint32_t cid) goto release_parent_ref; } transport_register_device(&conn->dev); + + spin_lock_irqsave(&connlock, flags); + list_add(&conn->conn_list, &connlist); + conn->active = 1; + spin_unlock_irqrestore(&connlock, flags); return conn; release_parent_ref: @@ -469,15 +556,21 @@ EXPORT_SYMBOL_GPL(iscsi_create_conn); * iscsi_destroy_conn - destroy iscsi class connection * @conn: iscsi cls session * - * This can be called from an LLD or iscsi_transport. + * This can be called from a LLD or iscsi_transport. */ int iscsi_destroy_conn(struct iscsi_cls_conn *conn) { + unsigned long flags; + + spin_lock_irqsave(&connlock, flags); + conn->active = 0; + list_del(&conn->conn_list); + spin_unlock_irqrestore(&connlock, flags); + transport_unregister_device(&conn->dev); device_unregister(&conn->dev); return 0; } - EXPORT_SYMBOL_GPL(iscsi_destroy_conn); /* @@ -687,132 +780,74 @@ iscsi_if_get_stats(struct iscsi_transport *transport, struct nlmsghdr *nlh) } /** - * iscsi_if_destroy_session_done - send session destr. completion event - * @conn: last connection for session - * - * This is called by HW iscsi LLDs to notify userpsace that its HW has - * removed a session. + * iscsi_session_event - send session destr. completion event + * @session: iscsi class session + * @event: type of event */ -int iscsi_if_destroy_session_done(struct iscsi_cls_conn *conn) +int iscsi_session_event(struct iscsi_cls_session *session, + enum iscsi_uevent_e event) { struct iscsi_internal *priv; - struct iscsi_cls_session *session; struct Scsi_Host *shost; struct iscsi_uevent *ev; struct sk_buff *skb; struct nlmsghdr *nlh; - unsigned long flags; int rc, len = NLMSG_SPACE(sizeof(*ev)); - priv = iscsi_if_transport_lookup(conn->transport); + priv = iscsi_if_transport_lookup(session->transport); if (!priv) return -EINVAL; - - session = iscsi_dev_to_session(conn->dev.parent); shost = iscsi_session_to_shost(session); skb = alloc_skb(len, GFP_KERNEL); if (!skb) { - dev_printk(KERN_ERR, &conn->dev, "Cannot notify userspace of " - "session creation event\n"); + dev_printk(KERN_ERR, &session->dev, "Cannot notify userspace " + "of session event %u\n", event); return -ENOMEM; } nlh = __nlmsg_put(skb, priv->daemon_pid, 0, 0, (len - sizeof(*nlh)), 0); ev = NLMSG_DATA(nlh); - ev->transport_handle = iscsi_handle(conn->transport); - ev->type = ISCSI_KEVENT_DESTROY_SESSION; - ev->r.d_session.host_no = shost->host_no; - ev->r.d_session.sid = session->sid; - - /* - * this will occur if the daemon is not up, so we just warn - * the user and when the daemon is restarted it will handle it - */ - rc = iscsi_broadcast_skb(skb, GFP_KERNEL); - if (rc < 0) - dev_printk(KERN_ERR, &conn->dev, "Cannot notify userspace of " - "session destruction event. Check iscsi daemon\n"); - - spin_lock_irqsave(&sesslock, flags); - list_del(&session->sess_list); - spin_unlock_irqrestore(&sesslock, flags); - - spin_lock_irqsave(&connlock, flags); - conn->active = 0; - list_del(&conn->conn_list); - spin_unlock_irqrestore(&connlock, flags); - - return rc; -} -EXPORT_SYMBOL_GPL(iscsi_if_destroy_session_done); - -/** - * iscsi_if_create_session_done - send session creation completion event - * @conn: leading connection for session - * - * This is called by HW iscsi LLDs to notify userpsace that its HW has - * created a session or a existing session is back in the logged in state. - */ -int iscsi_if_create_session_done(struct iscsi_cls_conn *conn) -{ - struct iscsi_internal *priv; - struct iscsi_cls_session *session; - struct Scsi_Host *shost; - struct iscsi_uevent *ev; - struct sk_buff *skb; - struct nlmsghdr *nlh; - unsigned long flags; - int rc, len = NLMSG_SPACE(sizeof(*ev)); + ev->transport_handle = iscsi_handle(session->transport); - priv = iscsi_if_transport_lookup(conn->transport); - if (!priv) + ev->type = event; + switch (event) { + case ISCSI_KEVENT_DESTROY_SESSION: + ev->r.d_session.host_no = shost->host_no; + ev->r.d_session.sid = session->sid; + break; + case ISCSI_KEVENT_CREATE_SESSION: + ev->r.c_session_ret.host_no = shost->host_no; + ev->r.c_session_ret.sid = session->sid; + break; + case ISCSI_KEVENT_UNBIND_SESSION: + ev->r.unbind_session.host_no = shost->host_no; + ev->r.unbind_session.sid = session->sid; + break; + default: + dev_printk(KERN_ERR, &session->dev, "Invalid event %u.\n", + event); + kfree_skb(skb); return -EINVAL; - - session = iscsi_dev_to_session(conn->dev.parent); - shost = iscsi_session_to_shost(session); - - skb = alloc_skb(len, GFP_KERNEL); - if (!skb) { - dev_printk(KERN_ERR, &conn->dev, "Cannot notify userspace of " - "session creation event\n"); - return -ENOMEM; } - nlh = __nlmsg_put(skb, priv->daemon_pid, 0, 0, (len - sizeof(*nlh)), 0); - ev = NLMSG_DATA(nlh); - ev->transport_handle = iscsi_handle(conn->transport); - ev->type = ISCSI_UEVENT_CREATE_SESSION; - ev->r.c_session_ret.host_no = shost->host_no; - ev->r.c_session_ret.sid = session->sid; - /* * this will occur if the daemon is not up, so we just warn * the user and when the daemon is restarted it will handle it */ rc = iscsi_broadcast_skb(skb, GFP_KERNEL); if (rc < 0) - dev_printk(KERN_ERR, &conn->dev, "Cannot notify userspace of " - "session creation event. Check iscsi daemon\n"); - - spin_lock_irqsave(&sesslock, flags); - list_add(&session->sess_list, &sesslist); - spin_unlock_irqrestore(&sesslock, flags); - - spin_lock_irqsave(&connlock, flags); - list_add(&conn->conn_list, &connlist); - conn->active = 1; - spin_unlock_irqrestore(&connlock, flags); + dev_printk(KERN_ERR, &session->dev, "Cannot notify userspace " + "of session event %u. Check iscsi daemon\n", event); return rc; } -EXPORT_SYMBOL_GPL(iscsi_if_create_session_done); +EXPORT_SYMBOL_GPL(iscsi_session_event); static int iscsi_if_create_session(struct iscsi_internal *priv, struct iscsi_uevent *ev) { struct iscsi_transport *transport = priv->iscsi_transport; struct iscsi_cls_session *session; - unsigned long flags; uint32_t hostno; session = transport->create_session(transport, &priv->t, @@ -823,10 +858,6 @@ iscsi_if_create_session(struct iscsi_internal *priv, struct iscsi_uevent *ev) if (!session) return -ENOMEM; - spin_lock_irqsave(&sesslock, flags); - list_add(&session->sess_list, &sesslist); - spin_unlock_irqrestore(&sesslock, flags); - ev->r.c_session_ret.host_no = hostno; ev->r.c_session_ret.sid = session->sid; return 0; @@ -837,7 +868,6 @@ iscsi_if_create_conn(struct iscsi_transport *transport, struct iscsi_uevent *ev) { struct iscsi_cls_conn *conn; struct iscsi_cls_session *session; - unsigned long flags; session = iscsi_session_lookup(ev->u.c_conn.sid); if (!session) { @@ -856,28 +886,17 @@ iscsi_if_create_conn(struct iscsi_transport *transport, struct iscsi_uevent *ev) ev->r.c_conn_ret.sid = session->sid; ev->r.c_conn_ret.cid = conn->cid; - - spin_lock_irqsave(&connlock, flags); - list_add(&conn->conn_list, &connlist); - conn->active = 1; - spin_unlock_irqrestore(&connlock, flags); - return 0; } static int iscsi_if_destroy_conn(struct iscsi_transport *transport, struct iscsi_uevent *ev) { - unsigned long flags; struct iscsi_cls_conn *conn; conn = iscsi_conn_lookup(ev->u.d_conn.sid, ev->u.d_conn.cid); if (!conn) return -EINVAL; - spin_lock_irqsave(&connlock, flags); - conn->active = 0; - list_del(&conn->conn_list); - spin_unlock_irqrestore(&connlock, flags); if (transport->destroy_conn) transport->destroy_conn(conn); @@ -1004,7 +1023,6 @@ iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh) struct iscsi_internal *priv; struct iscsi_cls_session *session; struct iscsi_cls_conn *conn; - unsigned long flags; priv = iscsi_if_transport_lookup(iscsi_ptr(ev->transport_handle)); if (!priv) @@ -1022,13 +1040,16 @@ iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh) break; case ISCSI_UEVENT_DESTROY_SESSION: session = iscsi_session_lookup(ev->u.d_session.sid); - if (session) { - spin_lock_irqsave(&sesslock, flags); - list_del(&session->sess_list); - spin_unlock_irqrestore(&sesslock, flags); - + if (session) transport->destroy_session(session); - } else + else + err = -EINVAL; + break; + case ISCSI_UEVENT_UNBIND_SESSION: + session = iscsi_session_lookup(ev->u.d_session.sid); + if (session) + iscsi_unbind_session(session); + else err = -EINVAL; break; case ISCSI_UEVENT_CREATE_CONN: diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h index bff0b1f7857b..8a4426df6c3a 100644 --- a/include/scsi/iscsi_if.h +++ b/include/scsi/iscsi_if.h @@ -49,12 +49,15 @@ enum iscsi_uevent_e { ISCSI_UEVENT_TGT_DSCVR = UEVENT_BASE + 15, ISCSI_UEVENT_SET_HOST_PARAM = UEVENT_BASE + 16, + ISCSI_UEVENT_UNBIND_SESSION = UEVENT_BASE + 17, /* up events */ ISCSI_KEVENT_RECV_PDU = KEVENT_BASE + 1, ISCSI_KEVENT_CONN_ERROR = KEVENT_BASE + 2, ISCSI_KEVENT_IF_ERROR = KEVENT_BASE + 3, ISCSI_KEVENT_DESTROY_SESSION = KEVENT_BASE + 4, + ISCSI_KEVENT_UNBIND_SESSION = KEVENT_BASE + 5, + ISCSI_KEVENT_CREATE_SESSION = KEVENT_BASE + 6, }; enum iscsi_tgt_dscvr { @@ -156,6 +159,10 @@ struct iscsi_uevent { uint32_t sid; uint32_t cid; } c_conn_ret; + struct msg_unbind_session { + uint32_t sid; + uint32_t host_no; + } unbind_session; struct msg_recv_req { uint32_t sid; uint32_t cid; diff --git a/include/scsi/iscsi_proto.h b/include/scsi/iscsi_proto.h index 6947082eee6d..318a909e7ae1 100644 --- a/include/scsi/iscsi_proto.h +++ b/include/scsi/iscsi_proto.h @@ -21,6 +21,8 @@ #ifndef ISCSI_PROTO_H #define ISCSI_PROTO_H +#include + #define ISCSI_DRAFT20_VERSION 0x00 /* default iSCSI listen port for incoming connections */ diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h index b8d97bd20f6e..093b4036f8db 100644 --- a/include/scsi/scsi_transport_iscsi.h +++ b/include/scsi/scsi_transport_iscsi.h @@ -186,6 +186,7 @@ struct iscsi_cls_session { /* recovery fields */ int recovery_tmo; struct delayed_work recovery_work; + struct work_struct unbind_work; int target_id; @@ -206,6 +207,8 @@ struct iscsi_cls_session { struct iscsi_host { struct list_head sessions; struct mutex mutex; + struct workqueue_struct *unbind_workq; + char unbind_workq_name[KOBJ_NAME_LEN]; }; /* @@ -215,8 +218,8 @@ extern struct iscsi_cls_session *iscsi_alloc_session(struct Scsi_Host *shost, struct iscsi_transport *transport); extern int iscsi_add_session(struct iscsi_cls_session *session, unsigned int target_id); -extern int iscsi_if_create_session_done(struct iscsi_cls_conn *conn); -extern int iscsi_if_destroy_session_done(struct iscsi_cls_conn *conn); +extern int iscsi_session_event(struct iscsi_cls_session *session, + enum iscsi_uevent_e event); extern struct iscsi_cls_session *iscsi_create_session(struct Scsi_Host *shost, struct iscsi_transport *t, unsigned int target_id); -- cgit v1.2.3-59-g8ed1b From f6d5180c78780d63b0577edeb3ce41eeb3e93eea Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 13 Dec 2007 12:43:30 -0600 Subject: [SCSI] libiscsi: fix nop handling During root boot and shutdown the target could send us nops. At this time iscsid cannot be running, so the target will drop the session and the boot or shutdown will hang. To handle this and allow us to better control when to check the network this patch moves the nop handling to the kernel. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/infiniband/ulp/iser/iscsi_iser.c | 4 +- drivers/scsi/iscsi_tcp.c | 4 +- drivers/scsi/libiscsi.c | 331 +++++++++++++++++++++++++------ drivers/scsi/scsi_transport_iscsi.c | 4 + include/scsi/iscsi_if.h | 11 + include/scsi/libiscsi.h | 8 + 6 files changed, 294 insertions(+), 68 deletions(-) diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c index a2622f4bd858..265606422278 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.c +++ b/drivers/infiniband/ulp/iser/iscsi_iser.c @@ -577,7 +577,9 @@ static struct iscsi_transport iscsi_iser_transport = { ISCSI_PERSISTENT_ADDRESS | ISCSI_TARGET_NAME | ISCSI_TPGT | ISCSI_USERNAME | ISCSI_PASSWORD | - ISCSI_USERNAME_IN | ISCSI_PASSWORD_IN, + ISCSI_USERNAME_IN | ISCSI_PASSWORD_IN | + ISCSI_FAST_ABORT | ISCSI_ABORT_TMO | + ISCSI_PING_TMO | ISCSI_RECV_TMO, .host_param_mask = ISCSI_HOST_HWADDRESS | ISCSI_HOST_NETDEV_NAME | ISCSI_HOST_INITIATOR_NAME, diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 90eae8e0d978..9b418522c9bf 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -2246,7 +2246,9 @@ static struct iscsi_transport iscsi_tcp_transport = { ISCSI_TARGET_NAME | ISCSI_TPGT | ISCSI_USERNAME | ISCSI_PASSWORD | ISCSI_USERNAME_IN | ISCSI_PASSWORD_IN | - ISCSI_FAST_ABORT, + ISCSI_FAST_ABORT | ISCSI_ABORT_TMO | + ISCSI_LU_RESET_TMO | + ISCSI_PING_TMO | ISCSI_RECV_TMO, .host_param_mask = ISCSI_HOST_HWADDRESS | ISCSI_HOST_IPADDRESS | ISCSI_HOST_INITIATOR_NAME | ISCSI_HOST_NETDEV_NAME, diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 5205ef2c29b2..96883614ba08 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -313,11 +313,70 @@ void iscsi_free_mgmt_task(struct iscsi_conn *conn, list_del_init(&mtask->running); if (conn->login_mtask == mtask) return; + + if (conn->ping_mtask == mtask) + conn->ping_mtask = NULL; __kfifo_put(conn->session->mgmtpool.queue, (void*)&mtask, sizeof(void*)); } EXPORT_SYMBOL_GPL(iscsi_free_mgmt_task); +static struct iscsi_mgmt_task * +__iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, + char *data, uint32_t data_size) +{ + struct iscsi_session *session = conn->session; + struct iscsi_mgmt_task *mtask; + + if (session->state == ISCSI_STATE_TERMINATE) + return NULL; + + if (hdr->opcode == (ISCSI_OP_LOGIN | ISCSI_OP_IMMEDIATE) || + hdr->opcode == (ISCSI_OP_TEXT | ISCSI_OP_IMMEDIATE)) + /* + * Login and Text are sent serially, in + * request-followed-by-response sequence. + * Same mtask can be used. Same ITT must be used. + * Note that login_mtask is preallocated at conn_create(). + */ + mtask = conn->login_mtask; + else { + BUG_ON(conn->c_stage == ISCSI_CONN_INITIAL_STAGE); + BUG_ON(conn->c_stage == ISCSI_CONN_STOPPED); + + if (!__kfifo_get(session->mgmtpool.queue, + (void*)&mtask, sizeof(void*))) + return NULL; + } + + if (data_size) { + memcpy(mtask->data, data, data_size); + mtask->data_count = data_size; + } else + mtask->data_count = 0; + + memcpy(mtask->hdr, hdr, sizeof(struct iscsi_hdr)); + INIT_LIST_HEAD(&mtask->running); + list_add_tail(&mtask->running, &conn->mgmtqueue); + return mtask; +} + +int iscsi_conn_send_pdu(struct iscsi_cls_conn *cls_conn, struct iscsi_hdr *hdr, + char *data, uint32_t data_size) +{ + struct iscsi_conn *conn = cls_conn->dd_data; + struct iscsi_session *session = conn->session; + int err = 0; + + spin_lock_bh(&session->lock); + if (!__iscsi_conn_send_pdu(conn, hdr, data, data_size)) + err = -EPERM; + spin_unlock_bh(&session->lock); + scsi_queue_work(session->host, &conn->xmitwork); + return err; +} +EXPORT_SYMBOL_GPL(iscsi_conn_send_pdu); + /** * iscsi_cmd_rsp - SCSI Command Response processing * @conn: iscsi connection @@ -409,6 +468,39 @@ static void iscsi_tmf_rsp(struct iscsi_conn *conn, struct iscsi_hdr *hdr) wake_up(&conn->ehwait); } +static void iscsi_send_nopout(struct iscsi_conn *conn, struct iscsi_nopin *rhdr) +{ + struct iscsi_nopout hdr; + struct iscsi_mgmt_task *mtask; + + if (!rhdr && conn->ping_mtask) + return; + + memset(&hdr, 0, sizeof(struct iscsi_nopout)); + hdr.opcode = ISCSI_OP_NOOP_OUT | ISCSI_OP_IMMEDIATE; + hdr.flags = ISCSI_FLAG_CMD_FINAL; + + if (rhdr) { + memcpy(hdr.lun, rhdr->lun, 8); + hdr.ttt = rhdr->ttt; + hdr.itt = RESERVED_ITT; + } else + hdr.ttt = RESERVED_ITT; + + mtask = __iscsi_conn_send_pdu(conn, (struct iscsi_hdr *)&hdr, NULL, 0); + if (!mtask) { + printk(KERN_ERR "Could not send nopout\n"); + return; + } + + /* only track our nops */ + if (!rhdr) { + conn->ping_mtask = mtask; + conn->last_ping = jiffies; + } + scsi_queue_work(conn->session->host, &conn->xmitwork); +} + static int iscsi_handle_reject(struct iscsi_conn *conn, struct iscsi_hdr *hdr, char *data, int datalen) { @@ -453,6 +545,7 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, struct iscsi_mgmt_task *mtask; uint32_t itt; + conn->last_recv = jiffies; if (hdr->itt != RESERVED_ITT) itt = get_itt(hdr->itt); else @@ -520,14 +613,22 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, iscsi_free_mgmt_task(conn, mtask); break; case ISCSI_OP_NOOP_IN: - if (hdr->ttt != cpu_to_be32(ISCSI_RESERVED_TAG) || datalen) { + if (hdr->ttt != cpu_to_be32(ISCSI_RESERVED_TAG) || + datalen) { rc = ISCSI_ERR_PROTO; break; } conn->exp_statsn = be32_to_cpu(hdr->statsn) + 1; - if (iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen)) - rc = ISCSI_ERR_CONN_FAILED; + if (conn->ping_mtask != mtask) { + /* + * If this is not in response to one of our + * nops then it must be from userspace. + */ + if (iscsi_recv_pdu(conn->cls_conn, hdr, data, + datalen)) + rc = ISCSI_ERR_CONN_FAILED; + } iscsi_free_mgmt_task(conn, mtask); break; default: @@ -547,8 +648,7 @@ int __iscsi_complete_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, if (hdr->ttt == cpu_to_be32(ISCSI_RESERVED_TAG)) break; - if (iscsi_recv_pdu(conn->cls_conn, hdr, NULL, 0)) - rc = ISCSI_ERR_CONN_FAILED; + iscsi_send_nopout(conn, (struct iscsi_nopin*)hdr); break; case ISCSI_OP_REJECT: rc = iscsi_handle_reject(conn, hdr, data, datalen); @@ -1003,62 +1103,6 @@ int iscsi_change_queue_depth(struct scsi_device *sdev, int depth) } EXPORT_SYMBOL_GPL(iscsi_change_queue_depth); -static struct iscsi_mgmt_task * -__iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr, - char *data, uint32_t data_size) -{ - struct iscsi_session *session = conn->session; - struct iscsi_mgmt_task *mtask; - - if (session->state == ISCSI_STATE_TERMINATE) - return NULL; - - if (hdr->opcode == (ISCSI_OP_LOGIN | ISCSI_OP_IMMEDIATE) || - hdr->opcode == (ISCSI_OP_TEXT | ISCSI_OP_IMMEDIATE)) - /* - * Login and Text are sent serially, in - * request-followed-by-response sequence. - * Same mtask can be used. Same ITT must be used. - * Note that login_mtask is preallocated at conn_create(). - */ - mtask = conn->login_mtask; - else { - BUG_ON(conn->c_stage == ISCSI_CONN_INITIAL_STAGE); - BUG_ON(conn->c_stage == ISCSI_CONN_STOPPED); - - if (!__kfifo_get(session->mgmtpool.queue, - (void*)&mtask, sizeof(void*))) - return NULL; - } - - if (data_size) { - memcpy(mtask->data, data, data_size); - mtask->data_count = data_size; - } else - mtask->data_count = 0; - - memcpy(mtask->hdr, hdr, sizeof(struct iscsi_hdr)); - INIT_LIST_HEAD(&mtask->running); - list_add_tail(&mtask->running, &conn->mgmtqueue); - return mtask; -} - -int iscsi_conn_send_pdu(struct iscsi_cls_conn *cls_conn, struct iscsi_hdr *hdr, - char *data, uint32_t data_size) -{ - struct iscsi_conn *conn = cls_conn->dd_data; - struct iscsi_session *session = conn->session; - int err = 0; - - spin_lock_bh(&session->lock); - if (!__iscsi_conn_send_pdu(conn, hdr, data, data_size)) - err = -EPERM; - spin_unlock_bh(&session->lock); - scsi_queue_work(session->host, &conn->xmitwork); - return err; -} -EXPORT_SYMBOL_GPL(iscsi_conn_send_pdu); - void iscsi_session_recovery_timedout(struct iscsi_cls_session *cls_session) { struct iscsi_session *session = class_to_transport_session(cls_session); @@ -1134,7 +1178,8 @@ static void iscsi_tmf_timedout(unsigned long data) } static int iscsi_exec_task_mgmt_fn(struct iscsi_conn *conn, - struct iscsi_tm *hdr, int age) + struct iscsi_tm *hdr, int age, + int timeout) { struct iscsi_session *session = conn->session; struct iscsi_mgmt_task *mtask; @@ -1149,7 +1194,7 @@ static int iscsi_exec_task_mgmt_fn(struct iscsi_conn *conn, return -EPERM; } conn->tmfcmd_pdus_cnt++; - conn->tmf_timer.expires = 30 * HZ + jiffies; + conn->tmf_timer.expires = timeout * HZ + jiffies; conn->tmf_timer.function = iscsi_tmf_timedout; conn->tmf_timer.data = (unsigned long)conn; add_timer(&conn->tmf_timer); @@ -1233,6 +1278,106 @@ static void iscsi_start_tx(struct iscsi_conn *conn) scsi_queue_work(conn->session->host, &conn->xmitwork); } +static enum scsi_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *scmd) +{ + struct iscsi_cls_session *cls_session; + struct iscsi_session *session; + struct iscsi_conn *conn; + enum scsi_eh_timer_return rc = EH_NOT_HANDLED; + + cls_session = starget_to_session(scsi_target(scmd->device)); + session = class_to_transport_session(cls_session); + + debug_scsi("scsi cmd %p timedout\n", scmd); + + spin_lock(&session->lock); + if (session->state != ISCSI_STATE_LOGGED_IN) { + /* + * We are probably in the middle of iscsi recovery so let + * that complete and handle the error. + */ + rc = EH_RESET_TIMER; + goto done; + } + + conn = session->leadconn; + if (!conn) { + /* In the middle of shuting down */ + rc = EH_RESET_TIMER; + goto done; + } + + if (!conn->recv_timeout && !conn->ping_timeout) + goto done; + /* + * if the ping timedout then we are in the middle of cleaning up + * and can let the iscsi eh handle it + */ + if (time_before_eq(conn->last_recv + (conn->recv_timeout * HZ) + + (conn->ping_timeout * HZ), jiffies)) + rc = EH_RESET_TIMER; + /* + * if we are about to check the transport then give the command + * more time + */ + if (time_before_eq(conn->last_recv + (conn->recv_timeout * HZ), + jiffies)) + rc = EH_RESET_TIMER; + /* if in the middle of checking the transport then give us more time */ + if (conn->ping_mtask) + rc = EH_RESET_TIMER; +done: + spin_unlock(&session->lock); + debug_scsi("return %s\n", rc == EH_RESET_TIMER ? "timer reset" : "nh"); + return rc; +} + +static void iscsi_check_transport_timeouts(unsigned long data) +{ + struct iscsi_conn *conn = (struct iscsi_conn *)data; + struct iscsi_session *session = conn->session; + unsigned long timeout, next_timeout = 0, last_recv; + + spin_lock(&session->lock); + if (session->state != ISCSI_STATE_LOGGED_IN) + goto done; + + timeout = conn->recv_timeout; + if (!timeout) + goto done; + + timeout *= HZ; + last_recv = conn->last_recv; + if (time_before_eq(last_recv + timeout + (conn->ping_timeout * HZ), + jiffies)) { + printk(KERN_ERR "ping timeout of %d secs expired, " + "last rx %lu, last ping %lu, now %lu\n", + conn->ping_timeout, last_recv, + conn->last_ping, jiffies); + spin_unlock(&session->lock); + iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); + return; + } + + if (time_before_eq(last_recv + timeout, jiffies)) { + if (time_before_eq(conn->last_ping, last_recv)) { + /* send a ping to try to provoke some traffic */ + debug_scsi("Sending nopout as ping on conn %p\n", conn); + iscsi_send_nopout(conn, NULL); + } + next_timeout = last_recv + timeout + (conn->ping_timeout * HZ); + } else { + next_timeout = last_recv + timeout; + } + + if (next_timeout) { + debug_scsi("Setting next tmo %lu\n", next_timeout); + mod_timer(&conn->transport_timer, next_timeout); + } +done: + spin_unlock(&session->lock); +} + static void iscsi_prep_abort_task_pdu(struct iscsi_cmd_task *ctask, struct iscsi_tm *hdr) { @@ -1304,7 +1449,7 @@ int iscsi_eh_abort(struct scsi_cmnd *sc) hdr = &conn->tmhdr; iscsi_prep_abort_task_pdu(ctask, hdr); - if (iscsi_exec_task_mgmt_fn(conn, hdr, age)) { + if (iscsi_exec_task_mgmt_fn(conn, hdr, age, session->abort_timeout)) { rc = FAILED; goto failed; } @@ -1365,7 +1510,7 @@ static void iscsi_prep_lun_reset_pdu(struct scsi_cmnd *sc, struct iscsi_tm *hdr) hdr->flags = ISCSI_TM_FUNC_LOGICAL_UNIT_RESET & ISCSI_FLAG_TM_FUNC_MASK; hdr->flags |= ISCSI_FLAG_CMD_FINAL; int_to_scsilun(sc->device->lun, (struct scsi_lun *)hdr->lun); - hdr->rtt = ISCSI_RESERVED_TAG; + hdr->rtt = RESERVED_ITT; } int iscsi_eh_device_reset(struct scsi_cmnd *sc) @@ -1396,7 +1541,8 @@ int iscsi_eh_device_reset(struct scsi_cmnd *sc) hdr = &conn->tmhdr; iscsi_prep_lun_reset_pdu(sc, hdr); - if (iscsi_exec_task_mgmt_fn(conn, hdr, session->age)) { + if (iscsi_exec_task_mgmt_fn(conn, hdr, session->age, + session->lu_reset_timeout)) { rc = FAILED; goto unlock; } @@ -1572,12 +1718,14 @@ iscsi_session_setup(struct iscsi_transport *iscsit, shost->max_cmd_len = iscsit->max_cmd_len; shost->transportt = scsit; shost->transportt->create_work_queue = 1; + shost->transportt->eh_timed_out = iscsi_eh_cmd_timed_out; *hostno = shost->host_no; session = iscsi_hostdata(shost->hostdata); memset(session, 0, sizeof(struct iscsi_session)); session->host = shost; session->state = ISCSI_STATE_FREE; + session->fast_abort = 1; session->mgmtpool_max = ISCSI_MGMT_CMDS_MAX; session->cmds_max = cmds_max; session->queued_cmdsn = session->cmdsn = initial_cmdsn; @@ -1708,6 +1856,11 @@ iscsi_conn_setup(struct iscsi_cls_session *cls_session, uint32_t conn_idx) conn->id = conn_idx; conn->exp_statsn = 0; conn->tmf_state = TMF_INITIAL; + + init_timer(&conn->transport_timer); + conn->transport_timer.data = (unsigned long)conn; + conn->transport_timer.function = iscsi_check_transport_timeouts; + INIT_LIST_HEAD(&conn->run_list); INIT_LIST_HEAD(&conn->mgmt_run_list); INIT_LIST_HEAD(&conn->mgmtqueue); @@ -1757,6 +1910,8 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn) struct iscsi_session *session = conn->session; unsigned long flags; + del_timer_sync(&conn->transport_timer); + spin_lock_bh(&session->lock); conn->c_stage = ISCSI_CONN_CLEANUP_WAIT; if (session->leadconn == conn) { @@ -1823,11 +1978,29 @@ int iscsi_conn_start(struct iscsi_cls_conn *cls_conn) return -EINVAL; } + if (conn->ping_timeout && !conn->recv_timeout) { + printk(KERN_ERR "iscsi: invalid recv timeout of zero " + "Using 5 seconds\n."); + conn->recv_timeout = 5; + } + + if (conn->recv_timeout && !conn->ping_timeout) { + printk(KERN_ERR "iscsi: invalid ping timeout of zero " + "Using 5 seconds.\n"); + conn->ping_timeout = 5; + } + spin_lock_bh(&session->lock); conn->c_stage = ISCSI_CONN_STARTED; session->state = ISCSI_STATE_LOGGED_IN; session->queued_cmdsn = session->cmdsn; + conn->last_recv = jiffies; + conn->last_ping = jiffies; + if (conn->recv_timeout && conn->ping_timeout) + mod_timer(&conn->transport_timer, + jiffies + (conn->recv_timeout * HZ)); + switch(conn->stop_stage) { case STOP_CONN_RECOVER: /* @@ -1879,6 +2052,8 @@ static void iscsi_start_session_recovery(struct iscsi_session *session, { int old_stop_stage; + del_timer_sync(&conn->transport_timer); + mutex_lock(&session->eh_mutex); spin_lock_bh(&session->lock); if (conn->stop_stage == STOP_CONN_TERM) { @@ -1993,6 +2168,18 @@ int iscsi_set_param(struct iscsi_cls_conn *cls_conn, case ISCSI_PARAM_FAST_ABORT: sscanf(buf, "%d", &session->fast_abort); break; + case ISCSI_PARAM_ABORT_TMO: + sscanf(buf, "%d", &session->abort_timeout); + break; + case ISCSI_PARAM_LU_RESET_TMO: + sscanf(buf, "%d", &session->lu_reset_timeout); + break; + case ISCSI_PARAM_PING_TMO: + sscanf(buf, "%d", &conn->ping_timeout); + break; + case ISCSI_PARAM_RECV_TMO: + sscanf(buf, "%d", &conn->recv_timeout); + break; case ISCSI_PARAM_MAX_RECV_DLENGTH: sscanf(buf, "%d", &conn->max_recv_dlength); break; @@ -2110,6 +2297,12 @@ int iscsi_session_get_param(struct iscsi_cls_session *cls_session, case ISCSI_PARAM_FAST_ABORT: len = sprintf(buf, "%d\n", session->fast_abort); break; + case ISCSI_PARAM_ABORT_TMO: + len = sprintf(buf, "%d\n", session->abort_timeout); + break; + case ISCSI_PARAM_LU_RESET_TMO: + len = sprintf(buf, "%d\n", session->lu_reset_timeout); + break; case ISCSI_PARAM_INITIAL_R2T_EN: len = sprintf(buf, "%d\n", session->initial_r2t_en); break; @@ -2167,6 +2360,12 @@ int iscsi_conn_get_param(struct iscsi_cls_conn *cls_conn, int len; switch(param) { + case ISCSI_PARAM_PING_TMO: + len = sprintf(buf, "%u\n", conn->ping_timeout); + break; + case ISCSI_PARAM_RECV_TMO: + len = sprintf(buf, "%u\n", conn->recv_timeout); + break; case ISCSI_PARAM_MAX_RECV_DLENGTH: len = sprintf(buf, "%u\n", conn->max_recv_dlength); break; diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index b82139dc4830..36aa50e45ec7 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -1202,6 +1202,8 @@ iscsi_conn_attr(port, ISCSI_PARAM_CONN_PORT); iscsi_conn_attr(exp_statsn, ISCSI_PARAM_EXP_STATSN); iscsi_conn_attr(persistent_address, ISCSI_PARAM_PERSISTENT_ADDRESS); iscsi_conn_attr(address, ISCSI_PARAM_CONN_ADDRESS); +iscsi_conn_attr(ping_tmo, ISCSI_PARAM_PING_TMO); +iscsi_conn_attr(recv_tmo, ISCSI_PARAM_RECV_TMO); #define iscsi_cdev_to_session(_cdev) \ iscsi_dev_to_session(_cdev->dev) @@ -1437,6 +1439,8 @@ iscsi_register_transport(struct iscsi_transport *tt) SETUP_CONN_RD_ATTR(exp_statsn, ISCSI_EXP_STATSN); SETUP_CONN_RD_ATTR(persistent_address, ISCSI_PERSISTENT_ADDRESS); SETUP_CONN_RD_ATTR(persistent_port, ISCSI_PERSISTENT_PORT); + SETUP_CONN_RD_ATTR(ping_tmo, ISCSI_PING_TMO); + SETUP_CONN_RD_ATTR(recv_tmo, ISCSI_RECV_TMO); BUG_ON(count > ISCSI_CONN_ATTRS); priv->conn_attrs[count] = NULL; diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h index 8a4426df6c3a..e19e58423166 100644 --- a/include/scsi/iscsi_if.h +++ b/include/scsi/iscsi_if.h @@ -244,6 +244,12 @@ enum iscsi_param { ISCSI_PARAM_PASSWORD_IN, ISCSI_PARAM_FAST_ABORT, + ISCSI_PARAM_ABORT_TMO, + ISCSI_PARAM_LU_RESET_TMO, + ISCSI_PARAM_HOST_RESET_TMO, + + ISCSI_PARAM_PING_TMO, + ISCSI_PARAM_RECV_TMO, /* must always be last */ ISCSI_PARAM_MAX, }; @@ -275,6 +281,11 @@ enum iscsi_param { #define ISCSI_PASSWORD (1 << ISCSI_PARAM_PASSWORD) #define ISCSI_PASSWORD_IN (1 << ISCSI_PARAM_PASSWORD_IN) #define ISCSI_FAST_ABORT (1 << ISCSI_PARAM_FAST_ABORT) +#define ISCSI_ABORT_TMO (1 << ISCSI_PARAM_ABORT_TMO) +#define ISCSI_LU_RESET_TMO (1 << ISCSI_PARAM_LU_RESET_TMO) +#define ISCSI_HOST_RESET_TMO (1 << ISCSI_PARAM_HOST_RESET_TMO) +#define ISCSI_PING_TMO (1 << ISCSI_PARAM_PING_TMO) +#define ISCSI_RECV_TMO (1 << ISCSI_PARAM_RECV_TMO) /* iSCSI HBA params */ enum iscsi_host_param { diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index d68f74523f2e..889f51fabab9 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -148,6 +148,12 @@ struct iscsi_conn { * conn_stop() flag: stop to recover, stop to terminate */ int stop_stage; + struct timer_list transport_timer; + unsigned long last_recv; + unsigned long last_ping; + int ping_timeout; + int recv_timeout; + struct iscsi_mgmt_task *ping_mtask; /* iSCSI connection-wide sequencing */ uint32_t exp_statsn; @@ -238,6 +244,8 @@ struct iscsi_session { uint32_t queued_cmdsn; /* configuration */ + int abort_timeout; + int lu_reset_timeout; int initial_r2t_en; unsigned max_r2t; int imm_data_en; -- cgit v1.2.3-59-g8ed1b From bca1088a8194f4fc850b65ea4f324c15d47d3cc3 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Thu, 13 Dec 2007 12:43:31 -0600 Subject: [SCSI] iscsi_tcp: update the website URL Use open-iscsi.org instead of linux-iscsi.sf.net, which hasn't been updated for ages. Signed-off-by: FUJITA Tomonori Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index e397599d54e3..0b243e072e4c 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -341,7 +341,7 @@ config ISCSI_TCP The userspace component needed to initialize the driver, documentation, and sample configuration files can be found here: - http://linux-iscsi.sf.net + http://open-iscsi.org config SGIWD93_SCSI tristate "SGI WD93C93 SCSI Driver" -- cgit v1.2.3-59-g8ed1b From 9000bcd649b26aef4c35d2941f8a65f05bbb9ee1 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 13 Dec 2007 12:43:32 -0600 Subject: [SCSI] libiscsi: Do not fail commands immediately during logout If the target requests a logout, then we do not want to fail commands to scsi-ml right away. This patch just fails in pending commands for a requeue immediately, and then lets iscsid handle running commands like normal recovery. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/libiscsi.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 96883614ba08..b17081bed128 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -917,7 +917,7 @@ check_mgmt: conn->ctask = list_entry(conn->xmitqueue.next, struct iscsi_cmd_task, running); if (conn->session->state == ISCSI_STATE_LOGGING_OUT) { - fail_command(conn, conn->ctask, DID_NO_CONNECT << 16); + fail_command(conn, conn->ctask, DID_IMM_RETRY << 16); continue; } if (iscsi_prep_scsi_cmd_pdu(conn->ctask)) { @@ -1024,21 +1024,19 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) * be entering our queuecommand while a block is starting * up because the block code is not locked) */ - if (session->state == ISCSI_STATE_IN_RECOVERY) { + switch (session->state) { + case ISCSI_STATE_IN_RECOVERY: reason = FAILURE_SESSION_IN_RECOVERY; goto reject; - } - - switch (session->state) { + case ISCSI_STATE_LOGGING_OUT: + reason = FAILURE_SESSION_LOGGING_OUT; + goto reject; case ISCSI_STATE_RECOVERY_FAILED: reason = FAILURE_SESSION_RECOVERY_TIMEOUT; break; case ISCSI_STATE_TERMINATE: reason = FAILURE_SESSION_TERMINATE; break; - case ISCSI_STATE_LOGGING_OUT: - reason = FAILURE_SESSION_LOGGING_OUT; - break; default: reason = FAILURE_SESSION_FREED; } -- cgit v1.2.3-59-g8ed1b From c1635cb786dbadd16fd6e6959dd3b41ae2f2831a Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 13 Dec 2007 12:43:33 -0600 Subject: [SCSI] libiscsi: clear conn->ctask when task is completed early If the current ctask is failed early, we legt the conn->ctask pointer pointing to a invalid task. When the xmit thread would send data for it, we would then oops. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/libiscsi.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index b17081bed128..4461317e617f 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -248,13 +248,16 @@ static int iscsi_prep_scsi_cmd_pdu(struct iscsi_cmd_task *ctask) */ static void iscsi_complete_command(struct iscsi_cmd_task *ctask) { - struct iscsi_session *session = ctask->conn->session; + struct iscsi_conn *conn = ctask->conn; + struct iscsi_session *session = conn->session; struct scsi_cmnd *sc = ctask->sc; ctask->state = ISCSI_TASK_COMPLETED; ctask->sc = NULL; /* SCSI eh reuses commands to verify us */ sc->SCp.ptr = NULL; + if (conn->ctask == ctask) + conn->ctask = NULL; list_del_init(&ctask->running); __kfifo_put(session->cmdpool.queue, (void*)&ctask, sizeof(void*)); sc->scsi_done(sc); -- cgit v1.2.3-59-g8ed1b From 1040c99d9fd9de2bf00efae6d91014f890575bdb Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 13 Dec 2007 12:43:34 -0600 Subject: [SCSI] libiscsi: Drop host lock in queuecommand The driver does not need the host lock in queuecommand so drop it. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/libiscsi.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 4461317e617f..b0bc8c3b0ecb 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1010,8 +1010,9 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) sc->SCp.ptr = NULL; host = sc->device->host; - session = iscsi_hostdata(host->hostdata); + spin_unlock(host->host_lock); + session = iscsi_hostdata(host->hostdata); spin_lock(&session->lock); /* @@ -1077,11 +1078,13 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) spin_unlock(&session->lock); scsi_queue_work(host, &conn->xmitwork); + spin_lock(host->host_lock); return 0; reject: spin_unlock(&session->lock); debug_scsi("cmd 0x%x rejected (%d)\n", sc->cmnd[0], reason); + spin_lock(host->host_lock); return SCSI_MLQUEUE_HOST_BUSY; fault: @@ -1091,6 +1094,7 @@ fault: sc->result = (DID_NO_CONNECT << 16); scsi_set_resid(sc, scsi_bufflen(sc)); sc->scsi_done(sc); + spin_lock(host->host_lock); return 0; } EXPORT_SYMBOL_GPL(iscsi_queuecommand); -- cgit v1.2.3-59-g8ed1b From a8ac6311cc21d78fa284cd43f56df2063f536bf1 Mon Sep 17 00:00:00 2001 From: Olaf Kirch Date: Thu, 13 Dec 2007 12:43:35 -0600 Subject: [SCSI] iscsi: convert xmit path to iscsi chunks Convert xmit to iscsi chunks. from michaelc@cs.wisc.edu: Bug fixes, more digest integration, sg chaining conversion and other sg wrapper changes, coding style sync up, and removal of io fields, like pdu_sent, that are not needed. Signed-off-by: Olaf Kirch Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/infiniband/ulp/iser/iscsi_iser.c | 3 +- drivers/scsi/iscsi_tcp.c | 1333 ++++++++++++------------------ drivers/scsi/iscsi_tcp.h | 75 +- drivers/scsi/libiscsi.c | 37 +- include/scsi/scsi_transport_iscsi.h | 2 +- 5 files changed, 563 insertions(+), 887 deletions(-) diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c index 265606422278..fd69fb35e3b3 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.c +++ b/drivers/infiniband/ulp/iser/iscsi_iser.c @@ -129,7 +129,7 @@ error: * iscsi_iser_cmd_init - Initialize iSCSI SCSI_READ or SCSI_WRITE commands * **/ -static void +static int iscsi_iser_cmd_init(struct iscsi_cmd_task *ctask) { struct iscsi_iser_conn *iser_conn = ctask->conn->dd_data; @@ -138,6 +138,7 @@ iscsi_iser_cmd_init(struct iscsi_cmd_task *ctask) iser_ctask->command_sent = 0; iser_ctask->iser_conn = iser_conn; iser_ctask_rdma_init(iser_ctask); + return 0; } /** diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 9b418522c9bf..7212fe95a66d 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -68,56 +68,10 @@ static unsigned int iscsi_max_lun = 512; module_param_named(max_lun, iscsi_max_lun, uint, S_IRUGO); static int iscsi_tcp_hdr_recv_done(struct iscsi_tcp_conn *tcp_conn, - struct iscsi_chunk *chunk); - -static inline void -iscsi_buf_init_iov(struct iscsi_buf *ibuf, char *vbuf, int size) -{ - ibuf->sg.page = virt_to_page(vbuf); - ibuf->sg.offset = offset_in_page(vbuf); - ibuf->sg.length = size; - ibuf->sent = 0; - ibuf->use_sendmsg = 1; -} - -static inline void -iscsi_buf_init_sg(struct iscsi_buf *ibuf, struct scatterlist *sg) -{ - ibuf->sg.page = sg->page; - ibuf->sg.offset = sg->offset; - ibuf->sg.length = sg->length; - /* - * Fastpath: sg element fits into single page - */ - if (sg->length + sg->offset <= PAGE_SIZE && !PageSlab(sg->page)) - ibuf->use_sendmsg = 0; - else - ibuf->use_sendmsg = 1; - ibuf->sent = 0; -} - -static inline int -iscsi_buf_left(struct iscsi_buf *ibuf) -{ - int rc; - - rc = ibuf->sg.length - ibuf->sent; - BUG_ON(rc < 0); - return rc; -} - -static inline void -iscsi_hdr_digest(struct iscsi_conn *conn, struct iscsi_buf *buf, - u8* crc) -{ - struct iscsi_tcp_conn *tcp_conn = conn->dd_data; - - crypto_hash_digest(&tcp_conn->tx_hash, &buf->sg, buf->sg.length, crc); - buf->sg.length += ISCSI_DIGEST_SIZE; -} + struct iscsi_segment *segment); /* - * Scatterlist handling: inside the iscsi_chunk, we + * Scatterlist handling: inside the iscsi_segment, we * remember an index into the scatterlist, and set data/size * to the current scatterlist entry. For highmem pages, we * kmap as needed. @@ -130,60 +84,72 @@ iscsi_hdr_digest(struct iscsi_conn *conn, struct iscsi_buf *buf, */ /** - * iscsi_tcp_chunk_init_sg - init indicated scatterlist entry - * @chunk: the buffer object - * @idx: index into scatterlist + * iscsi_tcp_segment_init_sg - init indicated scatterlist entry + * @segment: the buffer object + * @sg: scatterlist * @offset: byte offset into that sg entry * - * This function sets up the chunk so that subsequent + * This function sets up the segment so that subsequent * data is copied to the indicated sg entry, at the given * offset. */ static inline void -iscsi_tcp_chunk_init_sg(struct iscsi_chunk *chunk, - unsigned int idx, unsigned int offset) +iscsi_tcp_segment_init_sg(struct iscsi_segment *segment, + struct scatterlist *sg, unsigned int offset) { - struct scatterlist *sg; - - BUG_ON(chunk->sg == NULL); - - sg = &chunk->sg[idx]; - chunk->sg_index = idx; - chunk->sg_offset = offset; - chunk->size = min(sg->length - offset, chunk->total_size); - chunk->data = NULL; + segment->sg = sg; + segment->sg_offset = offset; + segment->size = min(sg->length - offset, + segment->total_size - segment->total_copied); + segment->data = NULL; } /** - * iscsi_tcp_chunk_map - map the current S/G page - * @chunk: iscsi chunk + * iscsi_tcp_segment_map - map the current S/G page + * @segment: iscsi_segment + * @recv: 1 if called from recv path * * We only need to possibly kmap data if scatter lists are being used, * because the iscsi passthrough and internal IO paths will never use high * mem pages. */ static inline void -iscsi_tcp_chunk_map(struct iscsi_chunk *chunk) +iscsi_tcp_segment_map(struct iscsi_segment *segment, int recv) { struct scatterlist *sg; - if (chunk->data != NULL || !chunk->sg) + if (segment->data != NULL || !segment->sg) return; - sg = &chunk->sg[chunk->sg_index]; - BUG_ON(chunk->sg_mapped); + sg = segment->sg; + BUG_ON(segment->sg_mapped); BUG_ON(sg->length == 0); - chunk->sg_mapped = kmap_atomic(sg->page, KM_SOFTIRQ0); - chunk->data = chunk->sg_mapped + sg->offset + chunk->sg_offset; + + /* + * If the page count is greater than one it is ok to send + * to the network layer's zero copy send path. If not we + * have to go the slow sendmsg path. We always map for the + * recv path. + */ + if (page_count(sg_page(sg)) >= 1 && !recv) + return; + + debug_tcp("iscsi_tcp_segment_map %s %p\n", recv ? "recv" : "xmit", + segment); + segment->sg_mapped = kmap_atomic(sg_page(sg), KM_SOFTIRQ0); + segment->data = segment->sg_mapped + sg->offset + segment->sg_offset; } static inline void -iscsi_tcp_chunk_unmap(struct iscsi_chunk *chunk) +iscsi_tcp_segment_unmap(struct iscsi_segment *segment) { - if (chunk->sg_mapped) { - kunmap_atomic(chunk->sg_mapped, KM_SOFTIRQ0); - chunk->sg_mapped = NULL; - chunk->data = NULL; + debug_tcp("iscsi_tcp_segment_unmap %p\n", segment); + + if (segment->sg_mapped) { + debug_tcp("iscsi_tcp_segment_unmap valid\n"); + kunmap_atomic(segment->sg_mapped, KM_SOFTIRQ0); + segment->sg_mapped = NULL; + segment->data = NULL; } } @@ -191,23 +157,24 @@ iscsi_tcp_chunk_unmap(struct iscsi_chunk *chunk) * Splice the digest buffer into the buffer */ static inline void -iscsi_tcp_chunk_splice_digest(struct iscsi_chunk *chunk, void *digest) +iscsi_tcp_segment_splice_digest(struct iscsi_segment *segment, void *digest) { - chunk->data = digest; - chunk->digest_len = ISCSI_DIGEST_SIZE; - chunk->total_size += ISCSI_DIGEST_SIZE; - chunk->size = ISCSI_DIGEST_SIZE; - chunk->copied = 0; - chunk->sg = NULL; - chunk->sg_index = 0; - chunk->hash = NULL; + segment->data = digest; + segment->digest_len = ISCSI_DIGEST_SIZE; + segment->total_size += ISCSI_DIGEST_SIZE; + segment->size = ISCSI_DIGEST_SIZE; + segment->copied = 0; + segment->sg = NULL; + segment->hash = NULL; } /** - * iscsi_tcp_chunk_done - check whether the chunk is complete - * @chunk: iscsi chunk to check + * iscsi_tcp_segment_done - check whether the segment is complete + * @segment: iscsi segment to check + * @recv: set to one of this is called from the recv path + * @copied: number of bytes copied * - * Check if we're done receiving this chunk. If the receive + * Check if we're done receiving this segment. If the receive * buffer is full but we expect more data, move on to the * next entry in the scatterlist. * @@ -217,62 +184,145 @@ iscsi_tcp_chunk_splice_digest(struct iscsi_chunk *chunk, void *digest) * This function must be re-entrant. */ static inline int -iscsi_tcp_chunk_done(struct iscsi_chunk *chunk) +iscsi_tcp_segment_done(struct iscsi_segment *segment, int recv, unsigned copied) { static unsigned char padbuf[ISCSI_PAD_LEN]; + struct scatterlist sg; unsigned int pad; - if (chunk->copied < chunk->size) { - iscsi_tcp_chunk_map(chunk); + debug_tcp("copied %u %u size %u %s\n", segment->copied, copied, + segment->size, recv ? "recv" : "xmit"); + if (segment->hash && copied) { + /* + * If a segment is kmapd we must unmap it before sending + * to the crypto layer since that will try to kmap it again. + */ + iscsi_tcp_segment_unmap(segment); + + if (!segment->data) { + sg_init_table(&sg, 1); + sg_set_page(&sg, sg_page(segment->sg), copied, + segment->copied + segment->sg_offset + + segment->sg->offset); + } else + sg_init_one(&sg, segment->data + segment->copied, + copied); + crypto_hash_update(segment->hash, &sg, copied); + } + + segment->copied += copied; + if (segment->copied < segment->size) { + iscsi_tcp_segment_map(segment, recv); return 0; } - chunk->total_copied += chunk->copied; - chunk->copied = 0; - chunk->size = 0; + segment->total_copied += segment->copied; + segment->copied = 0; + segment->size = 0; /* Unmap the current scatterlist page, if there is one. */ - iscsi_tcp_chunk_unmap(chunk); + iscsi_tcp_segment_unmap(segment); /* Do we have more scatterlist entries? */ - if (chunk->total_copied < chunk->total_size) { + debug_tcp("total copied %u total size %u\n", segment->total_copied, + segment->total_size); + if (segment->total_copied < segment->total_size) { /* Proceed to the next entry in the scatterlist. */ - iscsi_tcp_chunk_init_sg(chunk, chunk->sg_index + 1, 0); - iscsi_tcp_chunk_map(chunk); - BUG_ON(chunk->size == 0); + iscsi_tcp_segment_init_sg(segment, sg_next(segment->sg), + 0); + iscsi_tcp_segment_map(segment, recv); + BUG_ON(segment->size == 0); return 0; } /* Do we need to handle padding? */ - pad = iscsi_padding(chunk->total_copied); + pad = iscsi_padding(segment->total_copied); if (pad != 0) { debug_tcp("consume %d pad bytes\n", pad); - chunk->total_size += pad; - chunk->size = pad; - chunk->data = padbuf; + segment->total_size += pad; + segment->size = pad; + segment->data = padbuf; return 0; } /* - * Set us up for receiving the data digest. hdr digest + * Set us up for transferring the data digest. hdr digest * is completely handled in hdr done function. */ - if (chunk->hash) { - if (chunk->digest_len == 0) { - crypto_hash_final(chunk->hash, chunk->digest); - iscsi_tcp_chunk_splice_digest(chunk, - chunk->recv_digest); - return 0; - } + if (segment->hash) { + crypto_hash_final(segment->hash, segment->digest); + iscsi_tcp_segment_splice_digest(segment, + recv ? segment->recv_digest : segment->digest); + return 0; } return 1; } /** - * iscsi_tcp_chunk_recv - copy data to chunk + * iscsi_tcp_xmit_segment - transmit segment * @tcp_conn: the iSCSI TCP connection - * @chunk: the buffer to copy to + * @segment: the buffer to transmnit + * + * This function transmits as much of the buffer as + * the network layer will accept, and returns the number of + * bytes transmitted. + * + * If CRC hashing is enabled, the function will compute the + * hash as it goes. When the entire segment has been transmitted, + * it will retrieve the hash value and send it as well. + */ +static int +iscsi_tcp_xmit_segment(struct iscsi_tcp_conn *tcp_conn, + struct iscsi_segment *segment) +{ + struct socket *sk = tcp_conn->sock; + unsigned int copied = 0; + int r = 0; + + while (!iscsi_tcp_segment_done(segment, 0, r)) { + struct scatterlist *sg; + unsigned int offset, copy; + int flags = 0; + + r = 0; + offset = segment->copied; + copy = segment->size - offset; + + if (segment->total_copied + segment->size < segment->total_size) + flags |= MSG_MORE; + + /* Use sendpage if we can; else fall back to sendmsg */ + if (!segment->data) { + sg = segment->sg; + offset += segment->sg_offset + sg->offset; + r = tcp_conn->sendpage(sk, sg_page(sg), offset, copy, + flags); + } else { + struct msghdr msg = { .msg_flags = flags }; + struct kvec iov = { + .iov_base = segment->data + offset, + .iov_len = copy + }; + + r = kernel_sendmsg(sk, &msg, &iov, 1, copy); + } + + if (r < 0) { + iscsi_tcp_segment_unmap(segment); + if (copied || r == -EAGAIN) + break; + return r; + } + copied += r; + } + return copied; +} + +/** + * iscsi_tcp_segment_recv - copy data to segment + * @tcp_conn: the iSCSI TCP connection + * @segment: the buffer to copy to * @ptr: data pointer * @len: amount of data available * @@ -287,29 +337,24 @@ iscsi_tcp_chunk_done(struct iscsi_chunk *chunk) * just way we do for network layer checksums. */ static int -iscsi_tcp_chunk_recv(struct iscsi_tcp_conn *tcp_conn, - struct iscsi_chunk *chunk, const void *ptr, - unsigned int len) +iscsi_tcp_segment_recv(struct iscsi_tcp_conn *tcp_conn, + struct iscsi_segment *segment, const void *ptr, + unsigned int len) { - struct scatterlist sg; - unsigned int copy, copied = 0; - - while (!iscsi_tcp_chunk_done(chunk)) { - if (copied == len) - goto out; + unsigned int copy = 0, copied = 0; - copy = min(len - copied, chunk->size - chunk->copied); - memcpy(chunk->data + chunk->copied, ptr + copied, copy); - - if (chunk->hash) { - sg_init_one(&sg, ptr + copied, copy); - crypto_hash_update(chunk->hash, &sg, copy); + while (!iscsi_tcp_segment_done(segment, 1, copy)) { + if (copied == len) { + debug_tcp("iscsi_tcp_segment_recv copied %d bytes\n", + len); + break; } - chunk->copied += copy; + + copy = min(len - copied, segment->size - segment->copied); + debug_tcp("iscsi_tcp_segment_recv copying %d\n", copy); + memcpy(segment->data + segment->copied, ptr + copied, copy); copied += copy; } - -out: return copied; } @@ -325,12 +370,13 @@ iscsi_tcp_dgst_header(struct hash_desc *hash, const void *hdr, size_t hdrlen, static inline int iscsi_tcp_dgst_verify(struct iscsi_tcp_conn *tcp_conn, - struct iscsi_chunk *chunk) + struct iscsi_segment *segment) { - if (!chunk->digest_len) + if (!segment->digest_len) return 1; - if (memcmp(chunk->recv_digest, chunk->digest, chunk->digest_len)) { + if (memcmp(segment->recv_digest, segment->digest, + segment->digest_len)) { debug_scsi("digest mismatch\n"); return 0; } @@ -339,55 +385,59 @@ iscsi_tcp_dgst_verify(struct iscsi_tcp_conn *tcp_conn, } /* - * Helper function to set up chunk buffer + * Helper function to set up segment buffer */ static inline void -__iscsi_chunk_init(struct iscsi_chunk *chunk, size_t size, - iscsi_chunk_done_fn_t *done, struct hash_desc *hash) +__iscsi_segment_init(struct iscsi_segment *segment, size_t size, + iscsi_segment_done_fn_t *done, struct hash_desc *hash) { - memset(chunk, 0, sizeof(*chunk)); - chunk->total_size = size; - chunk->done = done; + memset(segment, 0, sizeof(*segment)); + segment->total_size = size; + segment->done = done; if (hash) { - chunk->hash = hash; + segment->hash = hash; crypto_hash_init(hash); } } static inline void -iscsi_chunk_init_linear(struct iscsi_chunk *chunk, void *data, size_t size, - iscsi_chunk_done_fn_t *done, struct hash_desc *hash) +iscsi_segment_init_linear(struct iscsi_segment *segment, void *data, + size_t size, iscsi_segment_done_fn_t *done, + struct hash_desc *hash) { - __iscsi_chunk_init(chunk, size, done, hash); - chunk->data = data; - chunk->size = size; + __iscsi_segment_init(segment, size, done, hash); + segment->data = data; + segment->size = size; } static inline int -iscsi_chunk_seek_sg(struct iscsi_chunk *chunk, - struct scatterlist *sg, unsigned int sg_count, - unsigned int offset, size_t size, - iscsi_chunk_done_fn_t *done, struct hash_desc *hash) +iscsi_segment_seek_sg(struct iscsi_segment *segment, + struct scatterlist *sg_list, unsigned int sg_count, + unsigned int offset, size_t size, + iscsi_segment_done_fn_t *done, struct hash_desc *hash) { + struct scatterlist *sg; unsigned int i; - __iscsi_chunk_init(chunk, size, done, hash); - for (i = 0; i < sg_count; ++i) { - if (offset < sg[i].length) { - chunk->sg = sg; - chunk->sg_count = sg_count; - iscsi_tcp_chunk_init_sg(chunk, i, offset); + debug_scsi("iscsi_segment_seek_sg offset %u size %llu\n", + offset, size); + __iscsi_segment_init(segment, size, done, hash); + for_each_sg(sg_list, sg, sg_count, i) { + debug_scsi("sg %d, len %u offset %u\n", i, sg->length, + sg->offset); + if (offset < sg->length) { + iscsi_tcp_segment_init_sg(segment, sg, offset); return 0; } - offset -= sg[i].length; + offset -= sg->length; } return ISCSI_ERR_DATA_OFFSET; } /** - * iscsi_tcp_hdr_recv_prep - prep chunk for hdr reception + * iscsi_tcp_hdr_recv_prep - prep segment for hdr reception * @tcp_conn: iscsi connection to prep for * * This function always passes NULL for the hash argument, because when this @@ -399,7 +449,7 @@ iscsi_tcp_hdr_recv_prep(struct iscsi_tcp_conn *tcp_conn) { debug_tcp("iscsi_tcp_hdr_recv_prep(%p%s)\n", tcp_conn, tcp_conn->iscsi_conn->hdrdgst_en ? ", digest enabled" : ""); - iscsi_chunk_init_linear(&tcp_conn->in.chunk, + iscsi_segment_init_linear(&tcp_conn->in.segment, tcp_conn->in.hdr_buf, sizeof(struct iscsi_hdr), iscsi_tcp_hdr_recv_done, NULL); } @@ -409,12 +459,12 @@ iscsi_tcp_hdr_recv_prep(struct iscsi_tcp_conn *tcp_conn) */ static int iscsi_tcp_data_recv_done(struct iscsi_tcp_conn *tcp_conn, - struct iscsi_chunk *chunk) + struct iscsi_segment *segment) { struct iscsi_conn *conn = tcp_conn->iscsi_conn; int rc = 0; - if (!iscsi_tcp_dgst_verify(tcp_conn, chunk)) + if (!iscsi_tcp_dgst_verify(tcp_conn, segment)) return ISCSI_ERR_DATA_DGST; rc = iscsi_complete_pdu(conn, tcp_conn->in.hdr, @@ -435,7 +485,7 @@ iscsi_tcp_data_recv_prep(struct iscsi_tcp_conn *tcp_conn) if (conn->datadgst_en) rx_hash = &tcp_conn->rx_hash; - iscsi_chunk_init_linear(&tcp_conn->in.chunk, + iscsi_segment_init_linear(&tcp_conn->in.segment, conn->data, tcp_conn->in.datalen, iscsi_tcp_data_recv_done, rx_hash); } @@ -448,7 +498,6 @@ iscsi_tcp_cleanup_ctask(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) { struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; struct iscsi_r2t_info *r2t; - struct scsi_cmnd *sc; /* flush ctask's r2t queues */ while (__kfifo_get(tcp_ctask->r2tqueue, (void*)&r2t, sizeof(void*))) { @@ -457,12 +506,12 @@ iscsi_tcp_cleanup_ctask(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) debug_scsi("iscsi_tcp_cleanup_ctask pending r2t dropped\n"); } - sc = ctask->sc; - if (unlikely(!sc)) - return; - - tcp_ctask->xmstate = XMSTATE_IDLE; - tcp_ctask->r2t = NULL; + r2t = tcp_ctask->r2t; + if (r2t != NULL) { + __kfifo_put(tcp_ctask->r2tpool.queue, (void*)&r2t, + sizeof(void*)); + tcp_ctask->r2t = NULL; + } } /** @@ -481,11 +530,6 @@ iscsi_data_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) int datasn = be32_to_cpu(rhdr->datasn); iscsi_update_cmdsn(session, (struct iscsi_nopin*)rhdr); - /* - * setup Data-In byte counter (gets decremented..) - */ - ctask->data_count = tcp_conn->in.datalen; - if (tcp_conn->in.datalen == 0) return 0; @@ -543,9 +587,6 @@ iscsi_solicit_data_init(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask, struct iscsi_r2t_info *r2t) { struct iscsi_data *hdr; - struct scsi_cmnd *sc = ctask->sc; - int i, sg_count = 0; - struct scatterlist *sg; hdr = &r2t->dtask.hdr; memset(hdr, 0, sizeof(struct iscsi_data)); @@ -569,34 +610,6 @@ iscsi_solicit_data_init(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask, conn->dataout_pdus_cnt++; r2t->sent = 0; - - iscsi_buf_init_iov(&r2t->headbuf, (char*)hdr, - sizeof(struct iscsi_hdr)); - - sg = scsi_sglist(sc); - r2t->sg = NULL; - for (i = 0; i < scsi_sg_count(sc); i++, sg += 1) { - /* FIXME: prefetch ? */ - if (sg_count + sg->length > r2t->data_offset) { - int page_offset; - - /* sg page found! */ - - /* offset within this page */ - page_offset = r2t->data_offset - sg_count; - - /* fill in this buffer */ - iscsi_buf_init_sg(&r2t->sendbuf, sg); - r2t->sendbuf.sg.offset += page_offset; - r2t->sendbuf.sg.length -= page_offset; - - /* xmit logic will continue with next one */ - r2t->sg = sg + 1; - break; - } - sg_count += sg->length; - } - BUG_ON(r2t->sg == NULL); } /** @@ -670,7 +683,6 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) tcp_ctask->exp_datasn = r2tsn + 1; __kfifo_put(tcp_ctask->r2tqueue, (void*)&r2t, sizeof(void*)); - tcp_ctask->xmstate |= XMSTATE_SOL_HDR_INIT; conn->r2t_pdus_cnt++; iscsi_requeue_ctask(ctask); @@ -684,13 +696,13 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) */ static int iscsi_tcp_process_data_in(struct iscsi_tcp_conn *tcp_conn, - struct iscsi_chunk *chunk) + struct iscsi_segment *segment) { struct iscsi_conn *conn = tcp_conn->iscsi_conn; struct iscsi_hdr *hdr = tcp_conn->in.hdr; int rc; - if (!iscsi_tcp_dgst_verify(tcp_conn, chunk)) + if (!iscsi_tcp_dgst_verify(tcp_conn, segment)) return ISCSI_ERR_DATA_DGST; /* check for non-exceptional status */ @@ -762,7 +774,7 @@ iscsi_tcp_hdr_dissect(struct iscsi_conn *conn, struct iscsi_hdr *hdr) /* * Setup copy of Data-In into the Scsi_Cmnd * Scatterlist case: - * We set up the iscsi_chunk to point to the next + * We set up the iscsi_segment to point to the next * scatterlist entry to copy to. As we go along, * we move on to the next scatterlist entry and * update the digest per-entry. @@ -774,13 +786,13 @@ iscsi_tcp_hdr_dissect(struct iscsi_conn *conn, struct iscsi_hdr *hdr) "datalen=%d)\n", tcp_conn, tcp_ctask->data_offset, tcp_conn->in.datalen); - return iscsi_chunk_seek_sg(&tcp_conn->in.chunk, - scsi_sglist(ctask->sc), - scsi_sg_count(ctask->sc), - tcp_ctask->data_offset, - tcp_conn->in.datalen, - iscsi_tcp_process_data_in, - rx_hash); + return iscsi_segment_seek_sg(&tcp_conn->in.segment, + scsi_sglist(ctask->sc), + scsi_sg_count(ctask->sc), + tcp_ctask->data_offset, + tcp_conn->in.datalen, + iscsi_tcp_process_data_in, + rx_hash); } /* fall through */ case ISCSI_OP_SCSI_CMD_RSP: @@ -846,17 +858,6 @@ iscsi_tcp_hdr_dissect(struct iscsi_conn *conn, struct iscsi_hdr *hdr) return rc; } -static inline void -partial_sg_digest_update(struct hash_desc *desc, struct scatterlist *sg, - int offset, int length) -{ - struct scatterlist temp; - - sg_init_table(&temp, 1); - sg_set_page(&temp, sg_page(sg), length, offset); - crypto_hash_update(desc, &temp, length); -} - /** * iscsi_tcp_hdr_recv_done - process PDU header * @@ -866,7 +867,7 @@ partial_sg_digest_update(struct hash_desc *desc, struct scatterlist *sg, */ static int iscsi_tcp_hdr_recv_done(struct iscsi_tcp_conn *tcp_conn, - struct iscsi_chunk *chunk) + struct iscsi_segment *segment) { struct iscsi_conn *conn = tcp_conn->iscsi_conn; struct iscsi_hdr *hdr; @@ -876,7 +877,7 @@ iscsi_tcp_hdr_recv_done(struct iscsi_tcp_conn *tcp_conn, * may need to go back to the caller for more. */ hdr = (struct iscsi_hdr *) tcp_conn->in.hdr_buf; - if (chunk->copied == sizeof(struct iscsi_hdr) && hdr->hlength) { + if (segment->copied == sizeof(struct iscsi_hdr) && hdr->hlength) { /* Bump the header length - the caller will * just loop around and get the AHS for us, and * call again. */ @@ -886,8 +887,8 @@ iscsi_tcp_hdr_recv_done(struct iscsi_tcp_conn *tcp_conn, if (sizeof(*hdr) + ahslen > sizeof(tcp_conn->in.hdr_buf)) return ISCSI_ERR_AHSLEN; - chunk->total_size += ahslen; - chunk->size += ahslen; + segment->total_size += ahslen; + segment->size += ahslen; return 0; } @@ -895,16 +896,16 @@ iscsi_tcp_hdr_recv_done(struct iscsi_tcp_conn *tcp_conn, * header digests; if so, set up the recv_digest buffer * and go back for more. */ if (conn->hdrdgst_en) { - if (chunk->digest_len == 0) { - iscsi_tcp_chunk_splice_digest(chunk, - chunk->recv_digest); + if (segment->digest_len == 0) { + iscsi_tcp_segment_splice_digest(segment, + segment->recv_digest); return 0; } iscsi_tcp_dgst_header(&tcp_conn->rx_hash, hdr, - chunk->total_copied - ISCSI_DIGEST_SIZE, - chunk->digest); + segment->total_copied - ISCSI_DIGEST_SIZE, + segment->digest); - if (!iscsi_tcp_dgst_verify(tcp_conn, chunk)) + if (!iscsi_tcp_dgst_verify(tcp_conn, segment)) return ISCSI_ERR_HDR_DGST; } @@ -925,7 +926,7 @@ iscsi_tcp_recv(read_descriptor_t *rd_desc, struct sk_buff *skb, { struct iscsi_conn *conn = rd_desc->arg.data; struct iscsi_tcp_conn *tcp_conn = conn->dd_data; - struct iscsi_chunk *chunk = &tcp_conn->in.chunk; + struct iscsi_segment *segment = &tcp_conn->in.segment; struct skb_seq_state seq; unsigned int consumed = 0; int rc = 0; @@ -943,27 +944,31 @@ iscsi_tcp_recv(read_descriptor_t *rd_desc, struct sk_buff *skb, const u8 *ptr; avail = skb_seq_read(consumed, &ptr, &seq); - if (avail == 0) + if (avail == 0) { + debug_tcp("no more data avail. Consumed %d\n", + consumed); break; - BUG_ON(chunk->copied >= chunk->size); + } + BUG_ON(segment->copied >= segment->size); debug_tcp("skb %p ptr=%p avail=%u\n", skb, ptr, avail); - rc = iscsi_tcp_chunk_recv(tcp_conn, chunk, ptr, avail); + rc = iscsi_tcp_segment_recv(tcp_conn, segment, ptr, avail); BUG_ON(rc == 0); consumed += rc; - if (chunk->total_copied >= chunk->total_size) { - rc = chunk->done(tcp_conn, chunk); + if (segment->total_copied >= segment->total_size) { + debug_tcp("segment done\n"); + rc = segment->done(tcp_conn, segment); if (rc != 0) { skb_abort_seq_read(&seq); goto error; } /* The done() functions sets up the - * next chunk. */ + * next segment. */ } } - + skb_abort_seq_read(&seq); conn->rxdata_octets += consumed; return consumed; @@ -996,7 +1001,7 @@ iscsi_tcp_data_ready(struct sock *sk, int flag) /* If we had to (atomically) map a highmem page, * unmap it now. */ - iscsi_tcp_chunk_unmap(&tcp_conn->in.chunk); + iscsi_tcp_segment_unmap(&tcp_conn->in.segment); } static void @@ -1076,121 +1081,173 @@ iscsi_conn_restore_callbacks(struct iscsi_tcp_conn *tcp_conn) } /** - * iscsi_send - generic send routine - * @sk: kernel's socket - * @buf: buffer to write from - * @size: actual size to write - * @flags: socket's flags - */ -static inline int -iscsi_send(struct iscsi_conn *conn, struct iscsi_buf *buf, int size, int flags) + * iscsi_xmit - TCP transmit + **/ +static int +iscsi_xmit(struct iscsi_conn *conn) { struct iscsi_tcp_conn *tcp_conn = conn->dd_data; - struct socket *sk = tcp_conn->sock; - int offset = buf->sg.offset + buf->sent, res; + struct iscsi_segment *segment = &tcp_conn->out.segment; + unsigned int consumed = 0; + int rc = 0; - /* - * if we got use_sg=0 or are sending something we kmallocd - * then we did not have to do kmap (kmap returns page_address) - * - * if we got use_sg > 0, but had to drop down, we do not - * set clustering so this should only happen for that - * slab case. - */ - if (buf->use_sendmsg) - res = sock_no_sendpage(sk, buf->sg.page, offset, size, flags); - else - res = tcp_conn->sendpage(sk, buf->sg.page, offset, size, flags); - - if (res >= 0) { - conn->txdata_octets += res; - buf->sent += res; - return res; + while (1) { + rc = iscsi_tcp_xmit_segment(tcp_conn, segment); + if (rc < 0) + goto error; + if (rc == 0) + break; + + consumed += rc; + + if (segment->total_copied >= segment->total_size) { + if (segment->done != NULL) { + rc = segment->done(tcp_conn, segment); + if (rc < 0) + goto error; + } + } } - tcp_conn->sendpage_failures_cnt++; - if (res == -EAGAIN) - res = -ENOBUFS; - else - iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); - return res; + debug_tcp("xmit %d bytes\n", consumed); + + conn->txdata_octets += consumed; + return consumed; + +error: + /* Transmit error. We could initiate error recovery + * here. */ + debug_tcp("Error sending PDU, errno=%d\n", rc); + iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED); + return rc; } /** - * iscsi_sendhdr - send PDU Header via tcp_sendpage() - * @conn: iscsi connection - * @buf: buffer to write from - * @datalen: lenght of data to be sent after the header - * - * Notes: - * (Tx, Fast Path) - **/ + * iscsi_tcp_xmit_qlen - return the number of bytes queued for xmit + */ static inline int -iscsi_sendhdr(struct iscsi_conn *conn, struct iscsi_buf *buf, int datalen) +iscsi_tcp_xmit_qlen(struct iscsi_conn *conn) { - int flags = 0; /* MSG_DONTWAIT; */ - int res, size; - - size = buf->sg.length - buf->sent; - BUG_ON(buf->sent + size > buf->sg.length); - if (buf->sent + size != buf->sg.length || datalen) - flags |= MSG_MORE; - - res = iscsi_send(conn, buf, size, flags); - debug_tcp("sendhdr %d bytes, sent %d res %d\n", size, buf->sent, res); - if (res >= 0) { - if (size != res) - return -EAGAIN; - return 0; - } + struct iscsi_tcp_conn *tcp_conn = conn->dd_data; + struct iscsi_segment *segment = &tcp_conn->out.segment; - return res; + return segment->total_copied - segment->total_size; } -/** - * iscsi_sendpage - send one page of iSCSI Data-Out. - * @conn: iscsi connection - * @buf: buffer to write from - * @count: remaining data - * @sent: number of bytes sent - * - * Notes: - * (Tx, Fast Path) - **/ static inline int -iscsi_sendpage(struct iscsi_conn *conn, struct iscsi_buf *buf, - int *count, int *sent) +iscsi_tcp_flush(struct iscsi_conn *conn) { - int flags = 0; /* MSG_DONTWAIT; */ - int res, size; - - size = buf->sg.length - buf->sent; - BUG_ON(buf->sent + size > buf->sg.length); - if (size > *count) - size = *count; - if (buf->sent + size != buf->sg.length || *count != size) - flags |= MSG_MORE; - - res = iscsi_send(conn, buf, size, flags); - debug_tcp("sendpage: %d bytes, sent %d left %d sent %d res %d\n", - size, buf->sent, *count, *sent, res); - if (res >= 0) { - *count -= res; - *sent += res; - if (size != res) + int rc; + + while (iscsi_tcp_xmit_qlen(conn)) { + rc = iscsi_xmit(conn); + if (rc == 0) return -EAGAIN; - return 0; + if (rc < 0) + return rc; } - return res; + return 0; } -static inline void -iscsi_data_digest_init(struct iscsi_tcp_conn *tcp_conn, - struct iscsi_tcp_cmd_task *tcp_ctask) +/* + * This is called when we're done sending the header. + * Simply copy the data_segment to the send segment, and return. + */ +static int +iscsi_tcp_send_hdr_done(struct iscsi_tcp_conn *tcp_conn, + struct iscsi_segment *segment) { - crypto_hash_init(&tcp_conn->tx_hash); - tcp_ctask->digest_count = 4; + tcp_conn->out.segment = tcp_conn->out.data_segment; + debug_tcp("Header done. Next segment size %u total_size %u\n", + tcp_conn->out.segment.size, tcp_conn->out.segment.total_size); + return 0; +} + +static void +iscsi_tcp_send_hdr_prep(struct iscsi_conn *conn, void *hdr, size_t hdrlen) +{ + struct iscsi_tcp_conn *tcp_conn = conn->dd_data; + + debug_tcp("%s(%p%s)\n", __FUNCTION__, tcp_conn, + conn->hdrdgst_en? ", digest enabled" : ""); + + /* Clear the data segment - needs to be filled in by the + * caller using iscsi_tcp_send_data_prep() */ + memset(&tcp_conn->out.data_segment, 0, sizeof(struct iscsi_segment)); + + /* If header digest is enabled, compute the CRC and + * place the digest into the same buffer. We make + * sure that both iscsi_tcp_ctask and mtask have + * sufficient room. + */ + if (conn->hdrdgst_en) { + iscsi_tcp_dgst_header(&tcp_conn->tx_hash, hdr, hdrlen, + hdr + hdrlen); + hdrlen += ISCSI_DIGEST_SIZE; + } + + /* Remember header pointer for later, when we need + * to decide whether there's a payload to go along + * with the header. */ + tcp_conn->out.hdr = hdr; + + iscsi_segment_init_linear(&tcp_conn->out.segment, hdr, hdrlen, + iscsi_tcp_send_hdr_done, NULL); +} + +/* + * Prepare the send buffer for the payload data. + * Padding and checksumming will all be taken care + * of by the iscsi_segment routines. + */ +static int +iscsi_tcp_send_data_prep(struct iscsi_conn *conn, struct scatterlist *sg, + unsigned int count, unsigned int offset, + unsigned int len) +{ + struct iscsi_tcp_conn *tcp_conn = conn->dd_data; + struct hash_desc *tx_hash = NULL; + unsigned int hdr_spec_len; + + debug_tcp("%s(%p, offset=%d, datalen=%d%s)\n", __FUNCTION__, + tcp_conn, offset, len, + conn->datadgst_en? ", digest enabled" : ""); + + /* Make sure the datalen matches what the caller + said he would send. */ + hdr_spec_len = ntoh24(tcp_conn->out.hdr->dlength); + WARN_ON(iscsi_padded(len) != iscsi_padded(hdr_spec_len)); + + if (conn->datadgst_en) + tx_hash = &tcp_conn->tx_hash; + + return iscsi_segment_seek_sg(&tcp_conn->out.data_segment, + sg, count, offset, len, + NULL, tx_hash); +} + +static void +iscsi_tcp_send_linear_data_prepare(struct iscsi_conn *conn, void *data, + size_t len) +{ + struct iscsi_tcp_conn *tcp_conn = conn->dd_data; + struct hash_desc *tx_hash = NULL; + unsigned int hdr_spec_len; + + debug_tcp("%s(%p, datalen=%d%s)\n", __FUNCTION__, tcp_conn, len, + conn->datadgst_en? ", digest enabled" : ""); + + /* Make sure the datalen matches what the caller + said he would send. */ + hdr_spec_len = ntoh24(tcp_conn->out.hdr->dlength); + WARN_ON(iscsi_padded(len) != iscsi_padded(hdr_spec_len)); + + if (conn->datadgst_en) + tx_hash = &tcp_conn->tx_hash; + + iscsi_segment_init_linear(&tcp_conn->out.data_segment, + data, len, NULL, tx_hash); } /** @@ -1206,12 +1263,17 @@ iscsi_data_digest_init(struct iscsi_tcp_conn *tcp_conn, * * Called under connection lock. **/ -static void +static int iscsi_solicit_data_cont(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask, - struct iscsi_r2t_info *r2t, int left) + struct iscsi_r2t_info *r2t) { struct iscsi_data *hdr; - int new_offset; + int new_offset, left; + + BUG_ON(r2t->data_length - r2t->sent < 0); + left = r2t->data_length - r2t->sent; + if (left == 0) + return 0; hdr = &r2t->dtask.hdr; memset(hdr, 0, sizeof(struct iscsi_data)); @@ -1232,43 +1294,46 @@ iscsi_solicit_data_cont(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask, r2t->data_count = left; hdr->flags = ISCSI_FLAG_CMD_FINAL; } - conn->dataout_pdus_cnt++; - - iscsi_buf_init_iov(&r2t->headbuf, (char*)hdr, - sizeof(struct iscsi_hdr)); - - if (iscsi_buf_left(&r2t->sendbuf)) - return; - - iscsi_buf_init_sg(&r2t->sendbuf, r2t->sg); - r2t->sg += 1; -} - -static void iscsi_set_padding(struct iscsi_tcp_cmd_task *tcp_ctask, - unsigned long len) -{ - tcp_ctask->pad_count = len & (ISCSI_PAD_LEN - 1); - if (!tcp_ctask->pad_count) - return; - tcp_ctask->pad_count = ISCSI_PAD_LEN - tcp_ctask->pad_count; - debug_scsi("write padding %d bytes\n", tcp_ctask->pad_count); - tcp_ctask->xmstate |= XMSTATE_W_PAD; + conn->dataout_pdus_cnt++; + return 1; } /** - * iscsi_tcp_cmd_init - Initialize iSCSI SCSI_READ or SCSI_WRITE commands + * iscsi_tcp_ctask - Initialize iSCSI SCSI_READ or SCSI_WRITE commands * @conn: iscsi connection * @ctask: scsi command task * @sc: scsi command **/ -static void -iscsi_tcp_cmd_init(struct iscsi_cmd_task *ctask) +static int +iscsi_tcp_ctask_init(struct iscsi_cmd_task *ctask) { struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; + struct iscsi_conn *conn = ctask->conn; + struct scsi_cmnd *sc = ctask->sc; + int err; BUG_ON(__kfifo_len(tcp_ctask->r2tqueue)); - tcp_ctask->xmstate = XMSTATE_CMD_HDR_INIT; + tcp_ctask->sent = 0; + tcp_ctask->exp_datasn = 0; + + /* Prepare PDU, optionally w/ immediate data */ + debug_scsi("ctask deq [cid %d itt 0x%x imm %d unsol %d]\n", + conn->id, ctask->itt, ctask->imm_count, + ctask->unsol_count); + iscsi_tcp_send_hdr_prep(conn, ctask->hdr, ctask->hdr_len); + + if (!ctask->imm_count) + return 0; + + /* If we have immediate data, attach a payload */ + err = iscsi_tcp_send_data_prep(conn, scsi_sglist(sc), scsi_sg_count(sc), + 0, ctask->imm_count); + if (err) + return err; + tcp_ctask->sent += ctask->imm_count; + ctask->imm_count = 0; + return 0; } /** @@ -1280,71 +1345,17 @@ iscsi_tcp_cmd_init(struct iscsi_cmd_task *ctask) * The function can return -EAGAIN in which case caller must * call it again later, or recover. '0' return code means successful * xmit. - * - * Management xmit state machine consists of these states: - * XMSTATE_IMM_HDR_INIT - calculate digest of PDU Header - * XMSTATE_IMM_HDR - PDU Header xmit in progress - * XMSTATE_IMM_DATA - PDU Data xmit in progress - * XMSTATE_IDLE - management PDU is done **/ static int iscsi_tcp_mtask_xmit(struct iscsi_conn *conn, struct iscsi_mgmt_task *mtask) { - struct iscsi_tcp_mgmt_task *tcp_mtask = mtask->dd_data; int rc; - debug_scsi("mtask deq [cid %d state %x itt 0x%x]\n", - conn->id, tcp_mtask->xmstate, mtask->itt); - - if (tcp_mtask->xmstate & XMSTATE_IMM_HDR_INIT) { - iscsi_buf_init_iov(&tcp_mtask->headbuf, (char*)mtask->hdr, - sizeof(struct iscsi_hdr)); - - if (mtask->data_count) { - tcp_mtask->xmstate |= XMSTATE_IMM_DATA; - iscsi_buf_init_iov(&tcp_mtask->sendbuf, - (char*)mtask->data, - mtask->data_count); - } - - if (conn->c_stage != ISCSI_CONN_INITIAL_STAGE && - conn->stop_stage != STOP_CONN_RECOVER && - conn->hdrdgst_en) - iscsi_hdr_digest(conn, &tcp_mtask->headbuf, - (u8*)tcp_mtask->hdrext); - - tcp_mtask->sent = 0; - tcp_mtask->xmstate &= ~XMSTATE_IMM_HDR_INIT; - tcp_mtask->xmstate |= XMSTATE_IMM_HDR; - } - - if (tcp_mtask->xmstate & XMSTATE_IMM_HDR) { - rc = iscsi_sendhdr(conn, &tcp_mtask->headbuf, - mtask->data_count); - if (rc) - return rc; - tcp_mtask->xmstate &= ~XMSTATE_IMM_HDR; - } - - if (tcp_mtask->xmstate & XMSTATE_IMM_DATA) { - BUG_ON(!mtask->data_count); - tcp_mtask->xmstate &= ~XMSTATE_IMM_DATA; - /* FIXME: implement. - * Virtual buffer could be spreaded across multiple pages... - */ - do { - int rc; - - rc = iscsi_sendpage(conn, &tcp_mtask->sendbuf, - &mtask->data_count, &tcp_mtask->sent); - if (rc) { - tcp_mtask->xmstate |= XMSTATE_IMM_DATA; - return rc; - } - } while (mtask->data_count); - } + /* Flush any pending data first. */ + rc = iscsi_tcp_flush(conn); + if (rc < 0) + return rc; - BUG_ON(tcp_mtask->xmstate != XMSTATE_IDLE); if (mtask->hdr->itt == RESERVED_ITT) { struct iscsi_session *session = conn->session; @@ -1352,411 +1363,112 @@ iscsi_tcp_mtask_xmit(struct iscsi_conn *conn, struct iscsi_mgmt_task *mtask) iscsi_free_mgmt_task(conn, mtask); spin_unlock_bh(&session->lock); } + return 0; } +/* + * iscsi_tcp_ctask_xmit - xmit normal PDU task + * @conn: iscsi connection + * @ctask: iscsi command task + * + * We're expected to return 0 when everything was transmitted succesfully, + * -EAGAIN if there's still data in the queue, or != 0 for any other kind + * of error. + */ static int -iscsi_send_cmd_hdr(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) +iscsi_tcp_ctask_xmit(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) { - struct scsi_cmnd *sc = ctask->sc; struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; + struct scsi_cmnd *sc = ctask->sc; int rc = 0; - if (tcp_ctask->xmstate & XMSTATE_CMD_HDR_INIT) { - tcp_ctask->sent = 0; - tcp_ctask->sg_count = 0; - tcp_ctask->exp_datasn = 0; - - if (sc->sc_data_direction == DMA_TO_DEVICE) { - struct scatterlist *sg = scsi_sglist(sc); - - iscsi_buf_init_sg(&tcp_ctask->sendbuf, sg); - tcp_ctask->sg = sg + 1; - tcp_ctask->bad_sg = sg + scsi_sg_count(sc); - - debug_scsi("cmd [itt 0x%x total %d imm_data %d " - "unsol count %d, unsol offset %d]\n", - ctask->itt, scsi_bufflen(sc), - ctask->imm_count, ctask->unsol_count, - ctask->unsol_offset); - } - - iscsi_buf_init_iov(&tcp_ctask->headbuf, (char*)ctask->hdr, - ctask->hdr_len); - - if (conn->hdrdgst_en) - iscsi_hdr_digest(conn, &tcp_ctask->headbuf, - iscsi_next_hdr(ctask)); - tcp_ctask->xmstate &= ~XMSTATE_CMD_HDR_INIT; - tcp_ctask->xmstate |= XMSTATE_CMD_HDR_XMIT; - } - - if (tcp_ctask->xmstate & XMSTATE_CMD_HDR_XMIT) { - rc = iscsi_sendhdr(conn, &tcp_ctask->headbuf, ctask->imm_count); - if (rc) - return rc; - tcp_ctask->xmstate &= ~XMSTATE_CMD_HDR_XMIT; - - if (sc->sc_data_direction != DMA_TO_DEVICE) - return 0; - - if (ctask->imm_count) { - tcp_ctask->xmstate |= XMSTATE_IMM_DATA; - iscsi_set_padding(tcp_ctask, ctask->imm_count); - - if (ctask->conn->datadgst_en) { - iscsi_data_digest_init(ctask->conn->dd_data, - tcp_ctask); - tcp_ctask->immdigest = 0; - } - } - - if (ctask->unsol_count) - tcp_ctask->xmstate |= - XMSTATE_UNS_HDR | XMSTATE_UNS_INIT; - } - return rc; -} - -static int -iscsi_send_padding(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) -{ - struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; - struct iscsi_tcp_conn *tcp_conn = conn->dd_data; - int sent = 0, rc; - - if (tcp_ctask->xmstate & XMSTATE_W_PAD) { - iscsi_buf_init_iov(&tcp_ctask->sendbuf, (char*)&tcp_ctask->pad, - tcp_ctask->pad_count); - if (conn->datadgst_en) - crypto_hash_update(&tcp_conn->tx_hash, - &tcp_ctask->sendbuf.sg, - tcp_ctask->sendbuf.sg.length); - } else if (!(tcp_ctask->xmstate & XMSTATE_W_RESEND_PAD)) - return 0; - - tcp_ctask->xmstate &= ~XMSTATE_W_PAD; - tcp_ctask->xmstate &= ~XMSTATE_W_RESEND_PAD; - debug_scsi("sending %d pad bytes for itt 0x%x\n", - tcp_ctask->pad_count, ctask->itt); - rc = iscsi_sendpage(conn, &tcp_ctask->sendbuf, &tcp_ctask->pad_count, - &sent); - if (rc) { - debug_scsi("padding send failed %d\n", rc); - tcp_ctask->xmstate |= XMSTATE_W_RESEND_PAD; - } - return rc; -} - -static int -iscsi_send_digest(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask, - struct iscsi_buf *buf, uint32_t *digest) -{ - struct iscsi_tcp_cmd_task *tcp_ctask; - struct iscsi_tcp_conn *tcp_conn; - int rc, sent = 0; - - if (!conn->datadgst_en) - return 0; - - tcp_ctask = ctask->dd_data; - tcp_conn = conn->dd_data; - - if (!(tcp_ctask->xmstate & XMSTATE_W_RESEND_DATA_DIGEST)) { - crypto_hash_final(&tcp_conn->tx_hash, (u8*)digest); - iscsi_buf_init_iov(buf, (char*)digest, 4); - } - tcp_ctask->xmstate &= ~XMSTATE_W_RESEND_DATA_DIGEST; - - rc = iscsi_sendpage(conn, buf, &tcp_ctask->digest_count, &sent); - if (!rc) - debug_scsi("sent digest 0x%x for itt 0x%x\n", *digest, - ctask->itt); - else { - debug_scsi("sending digest 0x%x failed for itt 0x%x!\n", - *digest, ctask->itt); - tcp_ctask->xmstate |= XMSTATE_W_RESEND_DATA_DIGEST; - } - return rc; -} - -static int -iscsi_send_data(struct iscsi_cmd_task *ctask, struct iscsi_buf *sendbuf, - struct scatterlist **sg, int *sent, int *count, - struct iscsi_buf *digestbuf, uint32_t *digest) -{ - struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; - struct iscsi_conn *conn = ctask->conn; - struct iscsi_tcp_conn *tcp_conn = conn->dd_data; - int rc, buf_sent, offset; - - while (*count) { - buf_sent = 0; - offset = sendbuf->sent; - - rc = iscsi_sendpage(conn, sendbuf, count, &buf_sent); - *sent = *sent + buf_sent; - if (buf_sent && conn->datadgst_en) - partial_sg_digest_update(&tcp_conn->tx_hash, - &sendbuf->sg, sendbuf->sg.offset + offset, - buf_sent); - if (!iscsi_buf_left(sendbuf) && *sg != tcp_ctask->bad_sg) { - iscsi_buf_init_sg(sendbuf, *sg); - *sg = *sg + 1; - } - - if (rc) - return rc; - } - - rc = iscsi_send_padding(conn, ctask); - if (rc) +flush: + /* Flush any pending data first. */ + rc = iscsi_tcp_flush(conn); + if (rc < 0) return rc; - return iscsi_send_digest(conn, ctask, digestbuf, digest); -} - -static int -iscsi_send_unsol_hdr(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) -{ - struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; - struct iscsi_data_task *dtask; - int rc; - - tcp_ctask->xmstate |= XMSTATE_UNS_DATA; - if (tcp_ctask->xmstate & XMSTATE_UNS_INIT) { - dtask = &tcp_ctask->unsol_dtask; - - iscsi_prep_unsolicit_data_pdu(ctask, &dtask->hdr); - iscsi_buf_init_iov(&tcp_ctask->headbuf, (char*)&dtask->hdr, - sizeof(struct iscsi_hdr)); - if (conn->hdrdgst_en) - iscsi_hdr_digest(conn, &tcp_ctask->headbuf, - (u8*)dtask->hdrext); - - tcp_ctask->xmstate &= ~XMSTATE_UNS_INIT; - iscsi_set_padding(tcp_ctask, ctask->data_count); - } - - rc = iscsi_sendhdr(conn, &tcp_ctask->headbuf, ctask->data_count); - if (rc) { - tcp_ctask->xmstate &= ~XMSTATE_UNS_DATA; - tcp_ctask->xmstate |= XMSTATE_UNS_HDR; - return rc; - } + /* Are we done already? */ + if (sc->sc_data_direction != DMA_TO_DEVICE) + return 0; - if (conn->datadgst_en) { - dtask = &tcp_ctask->unsol_dtask; - iscsi_data_digest_init(ctask->conn->dd_data, tcp_ctask); - dtask->digest = 0; - } + if (ctask->unsol_count != 0) { + struct iscsi_data *hdr = &tcp_ctask->unsol_dtask.hdr; - debug_scsi("uns dout [itt 0x%x dlen %d sent %d]\n", - ctask->itt, ctask->unsol_count, tcp_ctask->sent); - return 0; -} + /* Prepare a header for the unsolicited PDU. + * The amount of data we want to send will be + * in ctask->data_count. + * FIXME: return the data count instead. + */ + iscsi_prep_unsolicit_data_pdu(ctask, hdr); -static int -iscsi_send_unsol_pdu(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) -{ - struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; - int rc; + debug_tcp("unsol dout [itt 0x%x doff %d dlen %d]\n", + ctask->itt, tcp_ctask->sent, ctask->data_count); - if (tcp_ctask->xmstate & XMSTATE_UNS_HDR) { - BUG_ON(!ctask->unsol_count); - tcp_ctask->xmstate &= ~XMSTATE_UNS_HDR; -send_hdr: - rc = iscsi_send_unsol_hdr(conn, ctask); + iscsi_tcp_send_hdr_prep(conn, hdr, sizeof(*hdr)); + rc = iscsi_tcp_send_data_prep(conn, scsi_sglist(sc), + scsi_sg_count(sc), + tcp_ctask->sent, + ctask->data_count); if (rc) - return rc; - } - - if (tcp_ctask->xmstate & XMSTATE_UNS_DATA) { - struct iscsi_data_task *dtask = &tcp_ctask->unsol_dtask; - int start = tcp_ctask->sent; + goto fail; + tcp_ctask->sent += ctask->data_count; + ctask->unsol_count -= ctask->data_count; + goto flush; + } else { + struct iscsi_session *session = conn->session; + struct iscsi_r2t_info *r2t; - rc = iscsi_send_data(ctask, &tcp_ctask->sendbuf, &tcp_ctask->sg, - &tcp_ctask->sent, &ctask->data_count, - &dtask->digestbuf, &dtask->digest); - ctask->unsol_count -= tcp_ctask->sent - start; - if (rc) - return rc; - tcp_ctask->xmstate &= ~XMSTATE_UNS_DATA; - /* - * Done with the Data-Out. Next, check if we need - * to send another unsolicited Data-Out. + /* All unsolicited PDUs sent. Check for solicited PDUs. */ - if (ctask->unsol_count) { - debug_scsi("sending more uns\n"); - tcp_ctask->xmstate |= XMSTATE_UNS_INIT; - goto send_hdr; + spin_lock_bh(&session->lock); + r2t = tcp_ctask->r2t; + if (r2t != NULL) { + /* Continue with this R2T? */ + if (!iscsi_solicit_data_cont(conn, ctask, r2t)) { + debug_scsi(" done with r2t %p\n", r2t); + + __kfifo_put(tcp_ctask->r2tpool.queue, + (void*)&r2t, sizeof(void*)); + tcp_ctask->r2t = r2t = NULL; + } } - } - return 0; -} -static int iscsi_send_sol_pdu(struct iscsi_conn *conn, - struct iscsi_cmd_task *ctask) -{ - struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; - struct iscsi_session *session = conn->session; - struct iscsi_r2t_info *r2t; - struct iscsi_data_task *dtask; - int left, rc; - - if (tcp_ctask->xmstate & XMSTATE_SOL_HDR_INIT) { - if (!tcp_ctask->r2t) { - spin_lock_bh(&session->lock); + if (r2t == NULL) { __kfifo_get(tcp_ctask->r2tqueue, (void*)&tcp_ctask->r2t, sizeof(void*)); - spin_unlock_bh(&session->lock); + r2t = tcp_ctask->r2t; } -send_hdr: - r2t = tcp_ctask->r2t; - dtask = &r2t->dtask; - - if (conn->hdrdgst_en) - iscsi_hdr_digest(conn, &r2t->headbuf, - (u8*)dtask->hdrext); - tcp_ctask->xmstate &= ~XMSTATE_SOL_HDR_INIT; - tcp_ctask->xmstate |= XMSTATE_SOL_HDR; - } - - if (tcp_ctask->xmstate & XMSTATE_SOL_HDR) { - r2t = tcp_ctask->r2t; - dtask = &r2t->dtask; - - rc = iscsi_sendhdr(conn, &r2t->headbuf, r2t->data_count); - if (rc) - return rc; - tcp_ctask->xmstate &= ~XMSTATE_SOL_HDR; - tcp_ctask->xmstate |= XMSTATE_SOL_DATA; + spin_unlock_bh(&session->lock); - if (conn->datadgst_en) { - iscsi_data_digest_init(conn->dd_data, tcp_ctask); - dtask->digest = 0; + /* Waiting for more R2Ts to arrive. */ + if (r2t == NULL) { + debug_tcp("no R2Ts yet\n"); + return 0; } - iscsi_set_padding(tcp_ctask, r2t->data_count); - debug_scsi("sol dout [dsn %d itt 0x%x dlen %d sent %d]\n", - r2t->solicit_datasn - 1, ctask->itt, r2t->data_count, - r2t->sent); - } + debug_scsi("sol dout %p [dsn %d itt 0x%x doff %d dlen %d]\n", + r2t, r2t->solicit_datasn - 1, ctask->itt, + r2t->data_offset + r2t->sent, r2t->data_count); - if (tcp_ctask->xmstate & XMSTATE_SOL_DATA) { - r2t = tcp_ctask->r2t; - dtask = &r2t->dtask; + iscsi_tcp_send_hdr_prep(conn, &r2t->dtask.hdr, + sizeof(struct iscsi_hdr)); - rc = iscsi_send_data(ctask, &r2t->sendbuf, &r2t->sg, - &r2t->sent, &r2t->data_count, - &dtask->digestbuf, &dtask->digest); + rc = iscsi_tcp_send_data_prep(conn, scsi_sglist(sc), + scsi_sg_count(sc), + r2t->data_offset + r2t->sent, + r2t->data_count); if (rc) - return rc; - tcp_ctask->xmstate &= ~XMSTATE_SOL_DATA; - - /* - * Done with this Data-Out. Next, check if we have - * to send another Data-Out for this R2T. - */ - BUG_ON(r2t->data_length - r2t->sent < 0); - left = r2t->data_length - r2t->sent; - if (left) { - iscsi_solicit_data_cont(conn, ctask, r2t, left); - goto send_hdr; - } - - /* - * Done with this R2T. Check if there are more - * outstanding R2Ts ready to be processed. - */ - spin_lock_bh(&session->lock); - tcp_ctask->r2t = NULL; - __kfifo_put(tcp_ctask->r2tpool.queue, (void*)&r2t, - sizeof(void*)); - if (__kfifo_get(tcp_ctask->r2tqueue, (void*)&r2t, - sizeof(void*))) { - tcp_ctask->r2t = r2t; - spin_unlock_bh(&session->lock); - goto send_hdr; - } - spin_unlock_bh(&session->lock); + goto fail; + tcp_ctask->sent += r2t->data_count; + r2t->sent += r2t->data_count; + goto flush; } return 0; -} - -/** - * iscsi_tcp_ctask_xmit - xmit normal PDU task - * @conn: iscsi connection - * @ctask: iscsi command task - * - * Notes: - * The function can return -EAGAIN in which case caller must - * call it again later, or recover. '0' return code means successful - * xmit. - * The function is devided to logical helpers (above) for the different - * xmit stages. - * - *iscsi_send_cmd_hdr() - * XMSTATE_CMD_HDR_INIT - prepare Header and Data buffers Calculate - * Header Digest - * XMSTATE_CMD_HDR_XMIT - Transmit header in progress - * - *iscsi_send_padding - * XMSTATE_W_PAD - Prepare and send pading - * XMSTATE_W_RESEND_PAD - retry send pading - * - *iscsi_send_digest - * XMSTATE_W_RESEND_DATA_DIGEST - Finalize and send Data Digest - * XMSTATE_W_RESEND_DATA_DIGEST - retry sending digest - * - *iscsi_send_unsol_hdr - * XMSTATE_UNS_INIT - prepare un-solicit data header and digest - * XMSTATE_UNS_HDR - send un-solicit header - * - *iscsi_send_unsol_pdu - * XMSTATE_UNS_DATA - send un-solicit data in progress - * - *iscsi_send_sol_pdu - * XMSTATE_SOL_HDR_INIT - solicit data header and digest initialize - * XMSTATE_SOL_HDR - send solicit header - * XMSTATE_SOL_DATA - send solicit data - * - *iscsi_tcp_ctask_xmit - * XMSTATE_IMM_DATA - xmit managment data (??) - **/ -static int -iscsi_tcp_ctask_xmit(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) -{ - struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; - int rc = 0; - - debug_scsi("ctask deq [cid %d xmstate %x itt 0x%x]\n", - conn->id, tcp_ctask->xmstate, ctask->itt); - - rc = iscsi_send_cmd_hdr(conn, ctask); - if (rc) - return rc; - if (ctask->sc->sc_data_direction != DMA_TO_DEVICE) - return 0; - - if (tcp_ctask->xmstate & XMSTATE_IMM_DATA) { - rc = iscsi_send_data(ctask, &tcp_ctask->sendbuf, &tcp_ctask->sg, - &tcp_ctask->sent, &ctask->imm_count, - &tcp_ctask->immbuf, &tcp_ctask->immdigest); - if (rc) - return rc; - tcp_ctask->xmstate &= ~XMSTATE_IMM_DATA; - } - - rc = iscsi_send_unsol_pdu(conn, ctask); - if (rc) - return rc; - - rc = iscsi_send_sol_pdu(conn, ctask); - if (rc) - return rc; - - return rc; +fail: + iscsi_conn_failure(conn, rc); + return -EIO; } static struct iscsi_cls_conn * @@ -1970,10 +1682,17 @@ free_socket: /* called with host lock */ static void -iscsi_tcp_mgmt_init(struct iscsi_conn *conn, struct iscsi_mgmt_task *mtask) +iscsi_tcp_mtask_init(struct iscsi_conn *conn, struct iscsi_mgmt_task *mtask) { - struct iscsi_tcp_mgmt_task *tcp_mtask = mtask->dd_data; - tcp_mtask->xmstate = XMSTATE_IMM_HDR_INIT; + debug_scsi("mtask deq [cid %d itt 0x%x]\n", conn->id, mtask->itt); + + /* Prepare PDU, optionally w/ immediate data */ + iscsi_tcp_send_hdr_prep(conn, mtask->hdr, sizeof(*mtask->hdr)); + + /* If we have immediate data, attach a payload */ + if (mtask->data_count) + iscsi_tcp_send_linear_data_prepare(conn, mtask->data, + mtask->data_count); } static int @@ -2177,7 +1896,7 @@ iscsi_tcp_session_create(struct iscsi_transport *iscsit, struct iscsi_mgmt_task *mtask = session->mgmt_cmds[cmd_i]; struct iscsi_tcp_mgmt_task *tcp_mtask = mtask->dd_data; - mtask->hdr = &tcp_mtask->hdr; + mtask->hdr = (struct iscsi_hdr *) &tcp_mtask->hdr; } if (iscsi_r2tpool_alloc(class_to_transport_session(cls_session))) @@ -2274,8 +1993,8 @@ static struct iscsi_transport iscsi_tcp_transport = { /* IO */ .send_pdu = iscsi_conn_send_pdu, .get_stats = iscsi_conn_get_stats, - .init_cmd_task = iscsi_tcp_cmd_init, - .init_mgmt_task = iscsi_tcp_mgmt_init, + .init_cmd_task = iscsi_tcp_ctask_init, + .init_mgmt_task = iscsi_tcp_mtask_init, .xmit_cmd_task = iscsi_tcp_ctask_xmit, .xmit_mgmt_task = iscsi_tcp_mtask_xmit, .cleanup_cmd_task = iscsi_tcp_cleanup_ctask, diff --git a/drivers/scsi/iscsi_tcp.h b/drivers/scsi/iscsi_tcp.h index d49d87611e82..893cd2e1701e 100644 --- a/drivers/scsi/iscsi_tcp.h +++ b/drivers/scsi/iscsi_tcp.h @@ -24,35 +24,18 @@ #include -/* xmit state machine */ -#define XMSTATE_IDLE 0x0 -#define XMSTATE_CMD_HDR_INIT 0x1 -#define XMSTATE_CMD_HDR_XMIT 0x2 -#define XMSTATE_IMM_HDR 0x4 -#define XMSTATE_IMM_DATA 0x8 -#define XMSTATE_UNS_INIT 0x10 -#define XMSTATE_UNS_HDR 0x20 -#define XMSTATE_UNS_DATA 0x40 -#define XMSTATE_SOL_HDR 0x80 -#define XMSTATE_SOL_DATA 0x100 -#define XMSTATE_W_PAD 0x200 -#define XMSTATE_W_RESEND_PAD 0x400 -#define XMSTATE_W_RESEND_DATA_DIGEST 0x800 -#define XMSTATE_IMM_HDR_INIT 0x1000 -#define XMSTATE_SOL_HDR_INIT 0x2000 - #define ISCSI_SG_TABLESIZE SG_ALL #define ISCSI_TCP_MAX_CMD_LEN 16 struct crypto_hash; struct socket; struct iscsi_tcp_conn; -struct iscsi_chunk; +struct iscsi_segment; -typedef int iscsi_chunk_done_fn_t(struct iscsi_tcp_conn *, - struct iscsi_chunk *); +typedef int iscsi_segment_done_fn_t(struct iscsi_tcp_conn *, + struct iscsi_segment *); -struct iscsi_chunk { +struct iscsi_segment { unsigned char *data; unsigned int size; unsigned int copied; @@ -67,16 +50,14 @@ struct iscsi_chunk { struct scatterlist *sg; void *sg_mapped; unsigned int sg_offset; - unsigned int sg_index; - unsigned int sg_count; - iscsi_chunk_done_fn_t *done; + iscsi_segment_done_fn_t *done; }; /* Socket connection recieve helper */ struct iscsi_tcp_recv { struct iscsi_hdr *hdr; - struct iscsi_chunk chunk; + struct iscsi_segment segment; /* Allocate buffer for BHS + AHS */ uint32_t hdr_buf[64]; @@ -88,11 +69,8 @@ struct iscsi_tcp_recv { /* Socket connection send helper */ struct iscsi_tcp_send { struct iscsi_hdr *hdr; - struct iscsi_chunk chunk; - struct iscsi_chunk data_chunk; - - /* Allocate buffer for BHS + AHS */ - uint32_t hdr_buf[64]; + struct iscsi_segment segment; + struct iscsi_segment data_segment; }; struct iscsi_tcp_conn { @@ -118,29 +96,19 @@ struct iscsi_tcp_conn { uint32_t sendpage_failures_cnt; uint32_t discontiguous_hdr_cnt; - ssize_t (*sendpage)(struct socket *, struct page *, int, size_t, int); -}; + int error; -struct iscsi_buf { - struct scatterlist sg; - unsigned int sent; - char use_sendmsg; + ssize_t (*sendpage)(struct socket *, struct page *, int, size_t, int); }; struct iscsi_data_task { struct iscsi_data hdr; /* PDU */ char hdrext[ISCSI_DIGEST_SIZE];/* Header-Digest */ - struct iscsi_buf digestbuf; /* digest buffer */ - uint32_t digest; /* data digest */ }; struct iscsi_tcp_mgmt_task { struct iscsi_hdr hdr; char hdrext[ISCSI_DIGEST_SIZE]; /* Header-Digest */ - int xmstate; /* mgmt xmit progress */ - struct iscsi_buf headbuf; /* header buffer */ - struct iscsi_buf sendbuf; /* in progress buffer */ - int sent; }; struct iscsi_r2t_info { @@ -148,13 +116,10 @@ struct iscsi_r2t_info { __be32 exp_statsn; /* copied from R2T */ uint32_t data_length; /* copied from R2T */ uint32_t data_offset; /* copied from R2T */ - struct iscsi_buf headbuf; /* Data-Out Header Buffer */ - struct iscsi_buf sendbuf; /* Data-Out in progress buffer*/ int sent; /* R2T sequence progress */ int data_count; /* DATA-Out payload progress */ - struct scatterlist *sg; /* per-R2T SG list */ int solicit_datasn; - struct iscsi_data_task dtask; /* which data task */ + struct iscsi_data_task dtask; /* Data-Out header buf */ }; struct iscsi_tcp_cmd_task { @@ -163,24 +128,14 @@ struct iscsi_tcp_cmd_task { char hdrextbuf[ISCSI_MAX_AHS_SIZE + ISCSI_DIGEST_SIZE]; } hdr; - char pad[ISCSI_PAD_LEN]; - int pad_count; /* padded bytes */ - struct iscsi_buf headbuf; /* header buf (xmit) */ - struct iscsi_buf sendbuf; /* in progress buffer*/ - int xmstate; /* xmit xtate machine */ + int sent; - struct scatterlist *sg; /* per-cmd SG list */ - struct scatterlist *bad_sg; /* assert statement */ - int sg_count; /* SG's to process */ - uint32_t exp_datasn; /* expected target's R2TSN/DataSN */ + uint32_t exp_datasn; /* expected target's R2TSN/DataSN */ int data_offset; - struct iscsi_r2t_info *r2t; /* in progress R2T */ + struct iscsi_r2t_info *r2t; /* in progress R2T */ struct iscsi_pool r2tpool; struct kfifo *r2tqueue; - int digest_count; - uint32_t immdigest; /* for imm data */ - struct iscsi_buf immbuf; /* for imm data digest */ - struct iscsi_data_task unsol_dtask; /* unsol data task */ + struct iscsi_data_task unsol_dtask; /* Data-Out header buf */ }; #endif /* ISCSI_H */ diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index b0bc8c3b0ecb..f15df8d75fd8 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -156,20 +156,19 @@ static int iscsi_prep_scsi_cmd_pdu(struct iscsi_cmd_task *ctask) rc = iscsi_add_hdr(ctask, sizeof(*hdr)); if (rc) return rc; - hdr->opcode = ISCSI_OP_SCSI_CMD; - hdr->flags = ISCSI_ATTR_SIMPLE; - int_to_scsilun(sc->device->lun, (struct scsi_lun *)hdr->lun); - hdr->itt = build_itt(ctask->itt, conn->id, session->age); - hdr->data_length = cpu_to_be32(scsi_bufflen(sc)); - hdr->cmdsn = cpu_to_be32(session->cmdsn); - session->cmdsn++; - hdr->exp_statsn = cpu_to_be32(conn->exp_statsn); - memcpy(hdr->cdb, sc->cmnd, sc->cmd_len); + hdr->opcode = ISCSI_OP_SCSI_CMD; + hdr->flags = ISCSI_ATTR_SIMPLE; + int_to_scsilun(sc->device->lun, (struct scsi_lun *)hdr->lun); + hdr->itt = build_itt(ctask->itt, conn->id, session->age); + hdr->data_length = cpu_to_be32(scsi_bufflen(sc)); + hdr->cmdsn = cpu_to_be32(session->cmdsn); + session->cmdsn++; + hdr->exp_statsn = cpu_to_be32(conn->exp_statsn); + memcpy(hdr->cdb, sc->cmnd, sc->cmd_len); if (sc->cmd_len < MAX_COMMAND_SIZE) memset(&hdr->cdb[sc->cmd_len], 0, MAX_COMMAND_SIZE - sc->cmd_len); - ctask->data_count = 0; ctask->imm_count = 0; if (sc->sc_data_direction == DMA_TO_DEVICE) { hdr->flags |= ISCSI_FLAG_CMD_WRITE; @@ -198,9 +197,9 @@ static int iscsi_prep_scsi_cmd_pdu(struct iscsi_cmd_task *ctask) else ctask->imm_count = min(scsi_bufflen(sc), conn->max_xmit_dlength); - hton24(ctask->hdr->dlength, ctask->imm_count); + hton24(hdr->dlength, ctask->imm_count); } else - zero_data(ctask->hdr->dlength); + zero_data(hdr->dlength); if (!session->initial_r2t_en) { ctask->unsol_count = min((session->first_burst), @@ -210,7 +209,7 @@ static int iscsi_prep_scsi_cmd_pdu(struct iscsi_cmd_task *ctask) if (!ctask->unsol_count) /* No unsolicit Data-Out's */ - ctask->hdr->flags |= ISCSI_FLAG_CMD_FINAL; + hdr->flags |= ISCSI_FLAG_CMD_FINAL; } else { hdr->flags |= ISCSI_FLAG_CMD_FINAL; zero_data(hdr->dlength); @@ -228,13 +227,15 @@ static int iscsi_prep_scsi_cmd_pdu(struct iscsi_cmd_task *ctask) WARN_ON(hdrlength >= 256); hdr->hlength = hdrlength & 0xFF; - conn->scsicmd_pdus_cnt++; + if (conn->session->tt->init_cmd_task(conn->ctask)) + return EIO; - debug_scsi("iscsi prep [%s cid %d sc %p cdb 0x%x itt 0x%x len %d " + conn->scsicmd_pdus_cnt++; + debug_scsi("iscsi prep [%s cid %d sc %p cdb 0x%x itt 0x%x len %d " "cmdsn %d win %d]\n", - sc->sc_data_direction == DMA_TO_DEVICE ? "write" : "read", + sc->sc_data_direction == DMA_TO_DEVICE ? "write" : "read", conn->id, sc, sc->cmnd[0], ctask->itt, scsi_bufflen(sc), - session->cmdsn, session->max_cmdsn - session->exp_cmdsn + 1); + session->cmdsn, session->max_cmdsn - session->exp_cmdsn + 1); return 0; } @@ -927,7 +928,7 @@ check_mgmt: fail_command(conn, conn->ctask, DID_ABORT << 16); continue; } - conn->session->tt->init_cmd_task(conn->ctask); + conn->ctask->state = ISCSI_TASK_RUNNING; list_move_tail(conn->xmitqueue.next, &conn->run_list); rc = iscsi_xmit_ctask(conn); diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h index 093b4036f8db..404f11d331d6 100644 --- a/include/scsi/scsi_transport_iscsi.h +++ b/include/scsi/scsi_transport_iscsi.h @@ -118,7 +118,7 @@ struct iscsi_transport { char *data, uint32_t data_size); void (*get_stats) (struct iscsi_cls_conn *conn, struct iscsi_stats *stats); - void (*init_cmd_task) (struct iscsi_cmd_task *ctask); + int (*init_cmd_task) (struct iscsi_cmd_task *ctask); void (*init_mgmt_task) (struct iscsi_conn *conn, struct iscsi_mgmt_task *mtask); int (*xmit_cmd_task) (struct iscsi_conn *conn, -- cgit v1.2.3-59-g8ed1b From 03766a1d4e4520066d3ed2097bfdf6e606aba828 Mon Sep 17 00:00:00 2001 From: Olaf Kirch Date: Thu, 13 Dec 2007 12:43:36 -0600 Subject: [SCSI] iscsi_tcp: stop leaking r2t_info's when the incoming R2T is bad iscsi_r2t_rsp checks the incoming R2T for sanity, and if it thinks it's fishy, it will drop it silently. In this case, we leaked an r2t_info object. If we do this often enough, we run into a BUG_ON some time later. Removed r2t wrappers and update patch by Mike Christie Signed-off-by: Olaf Kirch Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 7212fe95a66d..ecba606e6521 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -658,6 +658,8 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) r2t->data_length = be32_to_cpu(rhdr->data_length); if (r2t->data_length == 0) { printk(KERN_ERR "iscsi_tcp: invalid R2T with zero data len\n"); + __kfifo_put(tcp_ctask->r2tpool.queue, (void*)&r2t, + sizeof(void*)); spin_unlock(&session->lock); return ISCSI_ERR_DATALEN; } @@ -669,10 +671,12 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) r2t->data_offset = be32_to_cpu(rhdr->data_offset); if (r2t->data_offset + r2t->data_length > scsi_bufflen(ctask->sc)) { - spin_unlock(&session->lock); printk(KERN_ERR "iscsi_tcp: invalid R2T with data len %u at " "offset %u and total length %d\n", r2t->data_length, r2t->data_offset, scsi_bufflen(ctask->sc)); + __kfifo_put(tcp_ctask->r2tpool.queue, (void*)&r2t, + sizeof(void*)); + spin_unlock(&session->lock); return ISCSI_ERR_DATALEN; } -- cgit v1.2.3-59-g8ed1b From 7a53dc52a5f218bf306b875bf0610e851d5a8268 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 13 Dec 2007 12:43:37 -0600 Subject: [SCSI] iscsi_tcp: drop session when itt does not match any command A target should never send us a itt that does not match a running task. If it does we do not really know what is coming down after the header, unless we evaluate the hdr and do some guessing sometimes. However, even if we know what is coming we probably do not have buffers for it or we cannot respond (if it is a r2t for example), so just drop the session. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index ecba606e6521..65df908019fd 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -755,11 +755,7 @@ iscsi_tcp_hdr_dissect(struct iscsi_conn *conn, struct iscsi_hdr *hdr) opcode = hdr->opcode & ISCSI_OPCODE_MASK; /* verify itt (itt encoding: age+cid+itt) */ rc = iscsi_verify_itt(conn, hdr, &itt); - if (rc == ISCSI_ERR_NO_SCSI_CMD) { - /* XXX: what does this do? */ - tcp_conn->in.datalen = 0; /* force drop */ - return 0; - } else if (rc) + if (rc) return rc; debug_tcp("opcode 0x%x ahslen %d datalen %d\n", -- cgit v1.2.3-59-g8ed1b From 4cd49ea1330c946db00a28819b766062716aa857 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 13 Dec 2007 12:43:38 -0600 Subject: [SCSI] libiscsi, iscsi class: set tmf to a safe default and export in sysfs Older tools will not be setting the tmf time outs since they did not exists, so set them to a safe default. And export abort and lu reset timeout values in sysfs. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/libiscsi.c | 2 ++ drivers/scsi/scsi_transport_iscsi.c | 8 ++++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index f15df8d75fd8..6573223cb346 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1732,6 +1732,8 @@ iscsi_session_setup(struct iscsi_transport *iscsit, session->host = shost; session->state = ISCSI_STATE_FREE; session->fast_abort = 1; + session->lu_reset_timeout = 15; + session->abort_timeout = 10; session->mgmtpool_max = ISCSI_MGMT_CMDS_MAX; session->cmds_max = cmds_max; session->queued_cmdsn = session->cmdsn = initial_cmdsn; diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 36aa50e45ec7..358559991f4f 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -30,7 +30,7 @@ #include #include -#define ISCSI_SESSION_ATTRS 16 +#define ISCSI_SESSION_ATTRS 18 #define ISCSI_CONN_ATTRS 11 #define ISCSI_HOST_ATTRS 4 #define ISCSI_TRANSPORT_VERSION "2.0-724" @@ -1242,7 +1242,9 @@ iscsi_session_attr(username, ISCSI_PARAM_USERNAME, 1); iscsi_session_attr(username_in, ISCSI_PARAM_USERNAME_IN, 1); iscsi_session_attr(password, ISCSI_PARAM_PASSWORD, 1); iscsi_session_attr(password_in, ISCSI_PARAM_PASSWORD_IN, 1); -iscsi_session_attr(fast_abort, ISCSI_PARAM_FAST_ABORT, 1); +iscsi_session_attr(fast_abort, ISCSI_PARAM_FAST_ABORT, 0); +iscsi_session_attr(abort_tmo, ISCSI_PARAM_ABORT_TMO, 0); +iscsi_session_attr(lu_reset_tmo, ISCSI_PARAM_LU_RESET_TMO, 0); #define iscsi_priv_session_attr_show(field, format) \ static ssize_t \ @@ -1467,6 +1469,8 @@ iscsi_register_transport(struct iscsi_transport *tt) SETUP_SESSION_RD_ATTR(username, ISCSI_PASSWORD); SETUP_SESSION_RD_ATTR(username_in, ISCSI_PASSWORD_IN); SETUP_SESSION_RD_ATTR(fast_abort, ISCSI_FAST_ABORT); + SETUP_SESSION_RD_ATTR(abort_tmo, ISCSI_ABORT_TMO); + SETUP_SESSION_RD_ATTR(lu_reset_tmo,ISCSI_LU_RESET_TMO); SETUP_PRIV_SESSION_RD_ATTR(recovery_tmo); BUG_ON(count > ISCSI_SESSION_ATTRS); -- cgit v1.2.3-59-g8ed1b From 66bbe0ce11c7ebe20cd1d4b5d271b2e124e223c5 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 13 Dec 2007 12:43:39 -0600 Subject: [SCSI] iscsi_tcp: enable sg chaining The previous patches converted iscsi_tcp to support sg chaining. This patch sets the proper flags and sets sg_table size to 4096. This allows fs io to be capped at max_sectors, but passthrough IO to be limited by some other part of the kernel. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 5 +++-- drivers/scsi/iscsi_tcp.h | 3 --- 2 files changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 65df908019fd..84c4a5026bcb 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -1928,13 +1928,14 @@ static struct scsi_host_template iscsi_sht = { .queuecommand = iscsi_queuecommand, .change_queue_depth = iscsi_change_queue_depth, .can_queue = ISCSI_DEF_XMIT_CMDS_MAX - 1, - .sg_tablesize = ISCSI_SG_TABLESIZE, + .sg_tablesize = 4096, .max_sectors = 0xFFFF, .cmd_per_lun = ISCSI_DEF_CMD_PER_LUN, .eh_abort_handler = iscsi_eh_abort, .eh_device_reset_handler= iscsi_eh_device_reset, .eh_host_reset_handler = iscsi_eh_host_reset, .use_clustering = DISABLE_CLUSTERING, + .use_sg_chaining = ENABLE_SG_CHAINING, .slave_configure = iscsi_tcp_slave_configure, .proc_name = "iscsi_tcp", .this_id = -1, @@ -1974,7 +1975,7 @@ static struct iscsi_transport iscsi_tcp_transport = { .host_template = &iscsi_sht, .conndata_size = sizeof(struct iscsi_conn), .max_conn = 1, - .max_cmd_len = ISCSI_TCP_MAX_CMD_LEN, + .max_cmd_len = 16, /* session management */ .create_session = iscsi_tcp_session_create, .destroy_session = iscsi_tcp_session_destroy, diff --git a/drivers/scsi/iscsi_tcp.h b/drivers/scsi/iscsi_tcp.h index 893cd2e1701e..ed0b991d1e72 100644 --- a/drivers/scsi/iscsi_tcp.h +++ b/drivers/scsi/iscsi_tcp.h @@ -24,9 +24,6 @@ #include -#define ISCSI_SG_TABLESIZE SG_ALL -#define ISCSI_TCP_MAX_CMD_LEN 16 - struct crypto_hash; struct socket; struct iscsi_tcp_conn; -- cgit v1.2.3-59-g8ed1b From 4545a88fc1ae2c0cd1da6e35f3adcbc56ff27b07 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 13 Dec 2007 12:43:40 -0600 Subject: [SCSI] iscsi_tcp: hold lock during data rsp processing iscsi_data_rsp needs to hold the sesison lock when it calls iscsi_update_cmdsn. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 84c4a5026bcb..edebdf27af9b 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -641,13 +641,11 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) } /* fill-in new R2T associated with the task */ - spin_lock(&session->lock); iscsi_update_cmdsn(session, (struct iscsi_nopin*)rhdr); if (!ctask->sc || session->state != ISCSI_STATE_LOGGED_IN) { printk(KERN_INFO "iscsi_tcp: dropping R2T itt %d in " "recovery...\n", ctask->itt); - spin_unlock(&session->lock); return 0; } @@ -660,7 +658,6 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) printk(KERN_ERR "iscsi_tcp: invalid R2T with zero data len\n"); __kfifo_put(tcp_ctask->r2tpool.queue, (void*)&r2t, sizeof(void*)); - spin_unlock(&session->lock); return ISCSI_ERR_DATALEN; } @@ -676,7 +673,6 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) r2t->data_offset, scsi_bufflen(ctask->sc)); __kfifo_put(tcp_ctask->r2tpool.queue, (void*)&r2t, sizeof(void*)); - spin_unlock(&session->lock); return ISCSI_ERR_DATALEN; } @@ -690,8 +686,6 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) conn->r2t_pdus_cnt++; iscsi_requeue_ctask(ctask); - spin_unlock(&session->lock); - return 0; } @@ -764,7 +758,9 @@ iscsi_tcp_hdr_dissect(struct iscsi_conn *conn, struct iscsi_hdr *hdr) switch(opcode) { case ISCSI_OP_SCSI_DATA_IN: ctask = session->cmds[itt]; + spin_lock(&conn->session->lock); rc = iscsi_data_rsp(conn, ctask); + spin_unlock(&conn->session->lock); if (rc) return rc; if (tcp_conn->in.datalen) { @@ -806,9 +802,11 @@ iscsi_tcp_hdr_dissect(struct iscsi_conn *conn, struct iscsi_hdr *hdr) ctask = session->cmds[itt]; if (ahslen) rc = ISCSI_ERR_AHSLEN; - else if (ctask->sc->sc_data_direction == DMA_TO_DEVICE) + else if (ctask->sc->sc_data_direction == DMA_TO_DEVICE) { + spin_lock(&session->lock); rc = iscsi_r2t_rsp(conn, ctask); - else + spin_unlock(&session->lock); + } else rc = ISCSI_ERR_PROTO; break; case ISCSI_OP_LOGIN_RSP: -- cgit v1.2.3-59-g8ed1b From 118365721768f29d74718a59895ed7bd3c10b68e Mon Sep 17 00:00:00 2001 From: vignesh babu Date: Thu, 13 Dec 2007 12:43:41 -0600 Subject: [SCSI] libiscsi: use is_power_of_2 Replacing n & (n - 1) for power of 2 check by is_power_of_2(n) Signed-off-by: vignesh babu Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/libiscsi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 6573223cb346..553168ae44f1 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -1700,7 +1701,7 @@ iscsi_session_setup(struct iscsi_transport *iscsit, qdepth = ISCSI_DEF_CMD_PER_LUN; } - if (cmds_max < 2 || (cmds_max & (cmds_max - 1)) || + if (!is_power_of_2(cmds_max) || cmds_max >= ISCSI_MGMT_ITT_OFFSET) { if (cmds_max != 0) printk(KERN_ERR "iscsi: invalid can_queue of %d. " -- cgit v1.2.3-59-g8ed1b From df93ffcd748ce41e7b716c3056ae511939bb745e Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 13 Dec 2007 12:43:42 -0600 Subject: [SCSI] iscsi_tcp: fix setting of r2t If we negotiate for X r2ts we have to use only X r2ts. We cannot round up (we could send less though). It is ok to fail if it is not something the driver can handle, so this patch just does that. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/iscsi_tcp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index edebdf27af9b..e5be5fd4ef58 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -1774,12 +1774,12 @@ iscsi_conn_set_param(struct iscsi_cls_conn *cls_conn, enum iscsi_param param, break; case ISCSI_PARAM_MAX_R2T: sscanf(buf, "%d", &value); - if (session->max_r2t == roundup_pow_of_two(value)) + if (value <= 0 || !is_power_of_2(value)) + return -EINVAL; + if (session->max_r2t == value) break; iscsi_r2tpool_free(session); iscsi_set_param(cls_conn, param, buf, buflen); - if (session->max_r2t & (session->max_r2t - 1)) - session->max_r2t = roundup_pow_of_two(session->max_r2t); if (iscsi_r2tpool_alloc(session)) return -ENOMEM; break; -- cgit v1.2.3-59-g8ed1b From 103962380ec3d86e675fc735e3e2b2fc8decaae9 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 13 Dec 2007 12:43:43 -0600 Subject: [SCSI] iscsi class: bump version Update version. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_iscsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 358559991f4f..ef0e74264880 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -33,7 +33,7 @@ #define ISCSI_SESSION_ATTRS 18 #define ISCSI_CONN_ATTRS 11 #define ISCSI_HOST_ATTRS 4 -#define ISCSI_TRANSPORT_VERSION "2.0-724" +#define ISCSI_TRANSPORT_VERSION "2.0-867" struct iscsi_internal { int daemon_pid; -- cgit v1.2.3-59-g8ed1b From 0033bb477e93f5f6ce9dae7a1f2aa5e5a8ebabd3 Mon Sep 17 00:00:00 2001 From: Swen Schillig Date: Tue, 18 Dec 2007 11:16:14 +0100 Subject: [SCSI] zfcp: update MAINTAINERS we are planning a major rewrite of the zfcp driver, meaning that a lot of patches will hit the mailing-list in the near future. Since I can't support this additional work-load along with my other responsibilities we are shifting the maintainership to Christof Schmitt as the maintainer and Martin Peschke as the co-maintainer. Please support the two in providing us a new and more stable zfcp environment. Thanks Swen Signed-off-by: James Bottomley --- MAINTAINERS | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index b4f611c60cfc..7fe116d9249f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3254,8 +3254,10 @@ W: http://www.ibm.com/developerworks/linux/linux390/ S: Supported S390 ZFCP DRIVER -P: Swen Schillig -M: swen@vnet.ibm.com +P: Christof Schmitt +M: christof.schmitt@de.ibm.com +P: Martin Peschke +M: mp3@de.ibm.com M: linux390@de.ibm.com L: linux-s390@vger.kernel.org W: http://www.ibm.com/developerworks/linux/linux390/ -- cgit v1.2.3-59-g8ed1b From 3be38e7a351a88e0fcf1565661cc94d1992fcad9 Mon Sep 17 00:00:00 2001 From: Roel Kluin <12o3l@tiscali.nl> Date: Thu, 15 Nov 2007 21:13:46 +0100 Subject: [SCSI] atari_NCR5380, sun3_NCR5380: operator precedence fix SR_REQ is defined 0x20, but bitanding has no effect because '!' has a higher priority than '&' Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: James Bottomley --- drivers/scsi/atari_NCR5380.c | 2 +- drivers/scsi/sun3_NCR5380.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c index d2ca3fa4fcf5..93b61f148653 100644 --- a/drivers/scsi/atari_NCR5380.c +++ b/drivers/scsi/atari_NCR5380.c @@ -1868,7 +1868,7 @@ static int do_abort(struct Scsi_Host *host) * the target sees, so we just handshake. */ - while (!(tmp = NCR5380_read(STATUS_REG)) & SR_REQ) + while (!((tmp = NCR5380_read(STATUS_REG)) & SR_REQ)) ; NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp)); diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c index 264f14ab5a61..bcaba86060ab 100644 --- a/drivers/scsi/sun3_NCR5380.c +++ b/drivers/scsi/sun3_NCR5380.c @@ -1863,7 +1863,7 @@ static int do_abort (struct Scsi_Host *host) * the target sees, so we just handshake. */ - while (!(tmp = NCR5380_read(STATUS_REG)) & SR_REQ); + while (!((tmp = NCR5380_read(STATUS_REG)) & SR_REQ)); NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp)); -- cgit v1.2.3-59-g8ed1b From bfd90dce248a49ced2b7419ecf78af9f7f37039e Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 11 Dec 2007 23:23:31 +0100 Subject: [SCSI] megaraid: add __devexit annotation megaraid_remove_one() can become __devexit. Signed-off-by: Adrian Bunk Acked-by: "Patro, Sumant" Signed-off-by: James Bottomley --- drivers/scsi/megaraid.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index 66c652035730..765c24d2bc38 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -4889,7 +4889,7 @@ __megaraid_shutdown(adapter_t *adapter) mdelay(1000); } -static void +static void __devexit megaraid_remove_one(struct pci_dev *pdev) { struct Scsi_Host *host = pci_get_drvdata(pdev); -- cgit v1.2.3-59-g8ed1b From d1ad09db2fd551d49d65ef040591cb9298e70fb6 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 20 Dec 2007 12:30:22 +0100 Subject: [SCSI] zfcp: fix use after free bug. zfcp_erp_strategy_check_fsfreq() checks if it is safe to access the fsf_req associated with the erp_action that gets passed. To test if it is safe it accesses the fsf_req in order to get its index into the hash list. This is broken since the fsf_req might be freed already and the read index has no meaning. It could lead to memory corruption. Fix this by introducing a new zfcp_reqlist_find_safe() method which just checks if addresses are equal. This is slower, but only gets called in case of error recovery. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky Signed-off-by: Christof Schmitt Signed-off-by: Martin Peschke Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_def.h | 14 ++++++++++++++ drivers/s390/scsi/zfcp_erp.c | 3 ++- 2 files changed, 16 insertions(+), 1 deletion(-) diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h index 294d0792e82b..9e9f6c1e4e5d 100644 --- a/drivers/s390/scsi/zfcp_def.h +++ b/drivers/s390/scsi/zfcp_def.h @@ -1123,6 +1123,20 @@ zfcp_reqlist_find(struct zfcp_adapter *adapter, unsigned long req_id) return NULL; } +static inline struct zfcp_fsf_req * +zfcp_reqlist_find_safe(struct zfcp_adapter *adapter, struct zfcp_fsf_req *req) +{ + struct zfcp_fsf_req *request; + unsigned int idx; + + for (idx = 0; idx < REQUEST_LIST_SIZE; idx++) { + list_for_each_entry(request, &adapter->req_list[idx], list) + if (request == req) + return request; + } + return NULL; +} + /* * functions needed for reference/usage counting */ diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 67d74ed0f25c..76fef3f6387e 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -846,7 +846,8 @@ zfcp_erp_strategy_check_fsfreq(struct zfcp_erp_action *erp_action) if (erp_action->fsf_req) { /* take lock to ensure that request is not deleted meanwhile */ spin_lock(&adapter->req_list_lock); - if (zfcp_reqlist_find(adapter, erp_action->fsf_req->req_id)) { + if (zfcp_reqlist_find_safe(adapter, erp_action->fsf_req) && + erp_action->fsf_req->erp_action == erp_action) { /* fsf_req still exists */ debug_text_event(adapter->erp_dbf, 3, "a_ca_req"); debug_event(adapter->erp_dbf, 3, &erp_action->fsf_req, -- cgit v1.2.3-59-g8ed1b From 8627533c115c546649693d68fed6a74762c47d51 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Thu, 20 Dec 2007 12:30:23 +0100 Subject: [SCSI] zfcp: Fix evaluation of port handles in abort handler According to the FSF spec, word 0 (bytes 0-3) has the handle specified with the abort command and word 1 (bytes 4-7) has the handle for the command to be aborted. Fix the if statements that try to compare those. Signed-off-by: Christof Schmitt Signed-off-by: Martin Peschke Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_fsf.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index ff866ebd44ac..e697b1cb6d27 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -1164,8 +1164,8 @@ zfcp_fsf_abort_fcp_command_handler(struct zfcp_fsf_req *new_fsf_req) { int retval = -EINVAL; struct zfcp_unit *unit; - unsigned char status_qual = - new_fsf_req->qtcb->header.fsf_status_qual.word[0]; + union fsf_status_qual *fsf_stat_qual = + &new_fsf_req->qtcb->header.fsf_status_qual; if (new_fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR) { /* do not set ZFCP_STATUS_FSFREQ_ABORTSUCCEEDED */ @@ -1178,7 +1178,7 @@ zfcp_fsf_abort_fcp_command_handler(struct zfcp_fsf_req *new_fsf_req) switch (new_fsf_req->qtcb->header.fsf_status) { case FSF_PORT_HANDLE_NOT_VALID: - if (status_qual >> 4 != status_qual % 0xf) { + if (fsf_stat_qual->word[0] != fsf_stat_qual->word[1]) { debug_text_event(new_fsf_req->adapter->erp_dbf, 3, "fsf_s_phand_nv0"); /* @@ -1207,8 +1207,7 @@ zfcp_fsf_abort_fcp_command_handler(struct zfcp_fsf_req *new_fsf_req) break; case FSF_LUN_HANDLE_NOT_VALID: - if (status_qual >> 4 != status_qual % 0xf) { - /* 2 */ + if (fsf_stat_qual->word[0] != fsf_stat_qual->word[1]) { debug_text_event(new_fsf_req->adapter->erp_dbf, 3, "fsf_s_lhand_nv0"); /* -- cgit v1.2.3-59-g8ed1b From 951f746fece2e24a26853b3872d16e9013b6fe0b Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Thu, 20 Dec 2007 12:30:24 +0100 Subject: [SCSI] zfcp: Hold queue lock when checking port/unit handle for abort command We need to hold the queue-lock when checking whether we still have a valid unit/port handle for the abort command, i.e whether we can issue this request for this unit/port. If the error recovery is about to close this unit/port, then it competes for the queue-lock. If the close request issued by the error recovery wins, then it is guaranteed that this unit/port has been blocked for other requests. Signed-off-by: Christof Schmitt Signed-off-by: Martin Peschke Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_fsf.c | 21 ++++++++------------- 1 file changed, 8 insertions(+), 13 deletions(-) diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index e697b1cb6d27..665fcb6ec5d5 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -1116,6 +1116,10 @@ zfcp_fsf_abort_fcp_command(unsigned long old_req_id, goto out; } + if (unlikely(!atomic_test_mask(ZFCP_STATUS_COMMON_UNBLOCKED, + &unit->status))) + goto unit_blocked; + sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0); sbale[0].flags |= SBAL_FLAGS0_TYPE_READ; sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY; @@ -1131,22 +1135,13 @@ zfcp_fsf_abort_fcp_command(unsigned long old_req_id, zfcp_fsf_start_timer(fsf_req, ZFCP_SCSI_ER_TIMEOUT); retval = zfcp_fsf_req_send(fsf_req); - if (retval) { - ZFCP_LOG_INFO("error: Failed to send abort command request " - "on adapter %s, port 0x%016Lx, unit 0x%016Lx\n", - zfcp_get_busid_by_adapter(adapter), - unit->port->wwpn, unit->fcp_lun); + if (!retval) + goto out; + + unit_blocked: zfcp_fsf_req_free(fsf_req); fsf_req = NULL; - goto out; - } - ZFCP_LOG_DEBUG("Abort FCP Command request initiated " - "(adapter%s, port d_id=0x%06x, " - "unit x%016Lx, old_req_id=0x%lx)\n", - zfcp_get_busid_by_adapter(adapter), - unit->port->d_id, - unit->fcp_lun, old_req_id); out: write_unlock_irqrestore(&adapter->request_queue.queue_lock, lock_flags); return fsf_req; -- cgit v1.2.3-59-g8ed1b From 3f0ca62add34010241db682e63bb68ba765bf4a9 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Thu, 20 Dec 2007 12:30:25 +0100 Subject: [SCSI] zfcp: Hold queue lock when checking port handle for ELS command We need to hold the queue-lock when checking whether we still have a valid port handle for the ELS command, i.e whether we can issue this request for this port. If the error recovery is about to close this port, then it competes for the queue-lock. If the close request issued by the error recovery wins, then it is guaranteed that this port has been blocked for other requests. Signed-off-by: Christof Schmitt Signed-off-by: Martin Peschke Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_erp.c | 2 +- drivers/s390/scsi/zfcp_fsf.c | 7 +++++++ 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 76fef3f6387e..4f86c0e12961 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -456,7 +456,7 @@ zfcp_test_link(struct zfcp_port *port) zfcp_port_get(port); retval = zfcp_erp_adisc(port); - if (retval != 0) { + if (retval != 0 && retval != -EBUSY) { zfcp_port_put(port); ZFCP_LOG_NORMAL("reopen needed for port 0x%016Lx " "on adapter %s\n ", port->wwpn, diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 665fcb6ec5d5..908e8b2107c1 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -1668,6 +1668,12 @@ zfcp_fsf_send_els(struct zfcp_send_els *els) goto failed_req; } + if (unlikely(!atomic_test_mask(ZFCP_STATUS_COMMON_UNBLOCKED, + &els->port->status))) { + ret = -EBUSY; + goto port_blocked; + } + sbale = zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr, 0); if (zfcp_use_one_sbal(els->req, els->req_count, els->resp, els->resp_count)){ @@ -1749,6 +1755,7 @@ zfcp_fsf_send_els(struct zfcp_send_els *els) "0x%06x)\n", zfcp_get_busid_by_adapter(adapter), d_id); goto out; + port_blocked: failed_send: zfcp_fsf_req_free(fsf_req); -- cgit v1.2.3-59-g8ed1b From ba1724202aafed4bbc4a239ac6fb433f454fddea Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Thu, 20 Dec 2007 12:30:26 +0100 Subject: [SCSI] zfcp: Hold queue lock when checking port/unit handle for FCP command We need to hold the queue-lock when checking whether we still have a valid unit/port handle for the FCP command, i.e whether we can issue this request for this unit/port. If the error recovery is about to close this unit/port, then it competes for the queue-lock. If the close request issued by the error recovery wins, then it is guaranteed that this unit/port has been blocked for other requests. Signed-off-by: Christof Schmitt Signed-off-by: Martin Peschke Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_fsf.c | 7 +++++++ drivers/s390/scsi/zfcp_scsi.c | 8 +++----- 2 files changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 908e8b2107c1..17c251cb10aa 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -3593,6 +3593,12 @@ zfcp_fsf_send_fcp_command_task(struct zfcp_adapter *adapter, goto failed_req_create; } + if (unlikely(!atomic_test_mask(ZFCP_STATUS_COMMON_UNBLOCKED, + &unit->status))) { + retval = -EBUSY; + goto unit_blocked; + } + zfcp_unit_get(unit); fsf_req->unit = unit; @@ -3733,6 +3739,7 @@ zfcp_fsf_send_fcp_command_task(struct zfcp_adapter *adapter, send_failed: no_fit: failed_scsi_cmnd: + unit_blocked: zfcp_unit_put(unit); zfcp_fsf_req_free(fsf_req); fsf_req = NULL; diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index 3298fd35000c..b9daf5c05862 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -258,8 +258,9 @@ zfcp_scsi_command_async(struct zfcp_adapter *adapter, struct zfcp_unit *unit, goto out; } - if (unlikely( - !atomic_test_mask(ZFCP_STATUS_COMMON_UNBLOCKED, &unit->status))) { + tmp = zfcp_fsf_send_fcp_command_task(adapter, unit, scpnt, use_timer, + ZFCP_REQ_AUTO_CLEANUP); + if (unlikely(tmp == -EBUSY)) { ZFCP_LOG_DEBUG("adapter %s not ready or unit 0x%016Lx " "on port 0x%016Lx in recovery\n", zfcp_get_busid_by_unit(unit), @@ -268,9 +269,6 @@ zfcp_scsi_command_async(struct zfcp_adapter *adapter, struct zfcp_unit *unit, goto out; } - tmp = zfcp_fsf_send_fcp_command_task(adapter, unit, scpnt, use_timer, - ZFCP_REQ_AUTO_CLEANUP); - if (unlikely(tmp < 0)) { ZFCP_LOG_DEBUG("error: initiation of Send FCP Cmnd failed\n"); retval = SCSI_MLQUEUE_HOST_BUSY; -- cgit v1.2.3-59-g8ed1b From fdf234527a070f6fc89f3ec5ee4ae1b263e59939 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Thu, 20 Dec 2007 12:30:27 +0100 Subject: [SCSI] zfcp: Hold queue lock when checking port/unit handle for task management cmd We need to hold the queue-lock when checking whether we still have a valid unit/port handle for the task management command, i.e whether we can issue this request for this unit/port. If the error recovery is about to close this unit/port, then it competes for the queue-lock. If the close request issued by the error recovery wins, then it is guaranteed that this unit/port has been blocked for other requests. Signed-off-by: Christof Schmitt Signed-off-by: Martin Peschke Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_fsf.c | 26 +++++++++----------------- 1 file changed, 9 insertions(+), 17 deletions(-) diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 17c251cb10aa..fe57941ab55d 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -3774,6 +3774,10 @@ zfcp_fsf_send_fcp_command_task_management(struct zfcp_adapter *adapter, goto out; } + if (unlikely(!atomic_test_mask(ZFCP_STATUS_COMMON_UNBLOCKED, + &unit->status))) + goto unit_blocked; + /* * Used to decide on proper handler in the return path, * could be either zfcp_fsf_send_fcp_command_task_handler or @@ -3807,25 +3811,13 @@ zfcp_fsf_send_fcp_command_task_management(struct zfcp_adapter *adapter, zfcp_fsf_start_timer(fsf_req, ZFCP_SCSI_ER_TIMEOUT); retval = zfcp_fsf_req_send(fsf_req); - if (retval) { - ZFCP_LOG_INFO("error: Could not send an FCP-command (task " - "management) on adapter %s, port 0x%016Lx for " - "unit LUN 0x%016Lx\n", - zfcp_get_busid_by_adapter(adapter), - unit->port->wwpn, - unit->fcp_lun); - zfcp_fsf_req_free(fsf_req); - fsf_req = NULL; + if (!retval) goto out; - } - ZFCP_LOG_TRACE("Send FCP Command (task management function) initiated " - "(adapter %s, port 0x%016Lx, unit 0x%016Lx, " - "tm_flags=0x%x)\n", - zfcp_get_busid_by_adapter(adapter), - unit->port->wwpn, - unit->fcp_lun, - tm_flags); + unit_blocked: + zfcp_fsf_req_free(fsf_req); + fsf_req = NULL; + out: write_unlock_irqrestore(&adapter->request_queue.queue_lock, lock_flags); return fsf_req; -- cgit v1.2.3-59-g8ed1b From 38b3167f75c9508156b974d19692c19b78292e2e Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Sun, 30 Dec 2007 19:34:52 +0900 Subject: [SCSI] mpt fusion: make mptsas_smp_handler update resid This patch fixes mptsas_smp_handler to update both din_resid or dout_resid on success. bsg can report back the residual. Signed-off-by: FUJITA Tomonori Signed-off-by: James Bottomley --- drivers/message/fusion/mptsas.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index e4c94f93de16..f77b329f6923 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -1343,6 +1343,8 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, smprep = (SmpPassthroughReply_t *)ioc->sas_mgmt.reply; memcpy(req->sense, smprep, sizeof(*smprep)); req->sense_len = sizeof(*smprep); + req->data_len = 0; + rsp->data_len -= smprep->ResponseDataLength; } else { printk(MYIOC_s_ERR_FMT "%s: smp passthru reply failed to be returned\n", ioc->name, __FUNCTION__); -- cgit v1.2.3-59-g8ed1b From b98e66fa0b687149dc3b26179096dc542c7d5001 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 28 Dec 2007 16:35:17 -0600 Subject: [SCSI] libsas: add host SMP processing This adds support for host side SMP processing, via a separate SMP interpreter file. Signed-off-by: James Bottomley --- drivers/scsi/libsas/Kconfig | 9 ++ drivers/scsi/libsas/Makefile | 1 + drivers/scsi/libsas/sas_expander.c | 8 +- drivers/scsi/libsas/sas_host_smp.c | 274 +++++++++++++++++++++++++++++++++++++ drivers/scsi/libsas/sas_internal.h | 14 ++ include/scsi/scsi_transport_sas.h | 8 +- 6 files changed, 305 insertions(+), 9 deletions(-) create mode 100644 drivers/scsi/libsas/sas_host_smp.c diff --git a/drivers/scsi/libsas/Kconfig b/drivers/scsi/libsas/Kconfig index c01a40d321d4..18f33cd54411 100644 --- a/drivers/scsi/libsas/Kconfig +++ b/drivers/scsi/libsas/Kconfig @@ -38,6 +38,15 @@ config SCSI_SAS_ATA Builds in ATA support into libsas. Will necessitate the loading of libata along with libsas. +config SCSI_SAS_HOST_SMP + bool "Support for SMP interpretation for SAS hosts" + default y + depends on SCSI_SAS_LIBSAS + help + Allows sas hosts to receive SMP frames. Selecting this + option builds an SMP interpreter into libsas. Say + N here if you want to save the few kb this consumes. + config SCSI_SAS_LIBSAS_DEBUG bool "Compile the SAS Domain Transport Attributes in debug mode" default y diff --git a/drivers/scsi/libsas/Makefile b/drivers/scsi/libsas/Makefile index fd387b91856e..60d6e93dd949 100644 --- a/drivers/scsi/libsas/Makefile +++ b/drivers/scsi/libsas/Makefile @@ -35,3 +35,4 @@ libsas-y += sas_init.o \ sas_expander.o \ sas_scsi_host.o libsas-$(CONFIG_SCSI_SAS_ATA) += sas_ata.o +libsas-$(CONFIG_SCSI_SAS_HOST_SMP) += sas_host_smp.o \ No newline at end of file diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 27674fe468f5..76555b1ddfd5 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -1896,11 +1896,9 @@ int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, } /* no rphy means no smp target support (ie aic94xx host) */ - if (!rphy) { - printk("%s: can we send a smp request to a host?\n", - __FUNCTION__); - return -EINVAL; - } + if (!rphy) + return sas_smp_host_handler(shost, req, rsp); + type = rphy->identify.device_type; if (type != SAS_EDGE_EXPANDER_DEVICE && diff --git a/drivers/scsi/libsas/sas_host_smp.c b/drivers/scsi/libsas/sas_host_smp.c new file mode 100644 index 000000000000..16f93123271e --- /dev/null +++ b/drivers/scsi/libsas/sas_host_smp.c @@ -0,0 +1,274 @@ +/* + * Serial Attached SCSI (SAS) Expander discovery and configuration + * + * Copyright (C) 2007 James E.J. Bottomley + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 only. + */ +#include +#include + +#include "sas_internal.h" + +#include +#include +#include "../scsi_sas_internal.h" + +static void sas_host_smp_discover(struct sas_ha_struct *sas_ha, u8 *resp_data, + u8 phy_id) +{ + struct sas_phy *phy; + struct sas_rphy *rphy; + + if (phy_id >= sas_ha->num_phys) { + resp_data[2] = SMP_RESP_NO_PHY; + return; + } + resp_data[2] = SMP_RESP_FUNC_ACC; + + phy = sas_ha->sas_phy[phy_id]->phy; + resp_data[9] = phy_id; + resp_data[13] = phy->negotiated_linkrate; + memcpy(resp_data + 16, sas_ha->sas_addr, SAS_ADDR_SIZE); + memcpy(resp_data + 24, sas_ha->sas_phy[phy_id]->attached_sas_addr, + SAS_ADDR_SIZE); + resp_data[40] = (phy->minimum_linkrate << 4) | + phy->minimum_linkrate_hw; + resp_data[41] = (phy->maximum_linkrate << 4) | + phy->maximum_linkrate_hw; + + if (!sas_ha->sas_phy[phy_id]->port || + !sas_ha->sas_phy[phy_id]->port->port_dev) + return; + + rphy = sas_ha->sas_phy[phy_id]->port->port_dev->rphy; + resp_data[12] = rphy->identify.device_type << 4; + resp_data[14] = rphy->identify.initiator_port_protocols; + resp_data[15] = rphy->identify.target_port_protocols; +} + +static void sas_report_phy_sata(struct sas_ha_struct *sas_ha, u8 *resp_data, + u8 phy_id) +{ + struct sas_rphy *rphy; + struct dev_to_host_fis *fis; + int i; + + if (phy_id >= sas_ha->num_phys) { + resp_data[2] = SMP_RESP_NO_PHY; + return; + } + + resp_data[2] = SMP_RESP_PHY_NO_SATA; + + if (!sas_ha->sas_phy[phy_id]->port) + return; + + rphy = sas_ha->sas_phy[phy_id]->port->port_dev->rphy; + fis = (struct dev_to_host_fis *) + sas_ha->sas_phy[phy_id]->port->port_dev->frame_rcvd; + if (rphy->identify.target_port_protocols != SAS_PROTOCOL_SATA) + return; + + resp_data[2] = SMP_RESP_FUNC_ACC; + resp_data[9] = phy_id; + memcpy(resp_data + 16, sas_ha->sas_phy[phy_id]->attached_sas_addr, + SAS_ADDR_SIZE); + + /* check to see if we have a valid d2h fis */ + if (fis->fis_type != 0x34) + return; + + /* the d2h fis is required by the standard to be in LE format */ + for (i = 0; i < 20; i += 4) { + u8 *dst = resp_data + 24 + i, *src = + &sas_ha->sas_phy[phy_id]->port->port_dev->frame_rcvd[i]; + dst[0] = src[3]; + dst[1] = src[2]; + dst[2] = src[1]; + dst[3] = src[0]; + } +} + +static void sas_phy_control(struct sas_ha_struct *sas_ha, u8 phy_id, + u8 phy_op, enum sas_linkrate min, + enum sas_linkrate max, u8 *resp_data) +{ + struct sas_internal *i = + to_sas_internal(sas_ha->core.shost->transportt); + struct sas_phy_linkrates rates; + + if (phy_id >= sas_ha->num_phys) { + resp_data[2] = SMP_RESP_NO_PHY; + return; + } + switch (phy_op) { + case PHY_FUNC_NOP: + case PHY_FUNC_LINK_RESET: + case PHY_FUNC_HARD_RESET: + case PHY_FUNC_DISABLE: + case PHY_FUNC_CLEAR_ERROR_LOG: + case PHY_FUNC_CLEAR_AFFIL: + case PHY_FUNC_TX_SATA_PS_SIGNAL: + break; + + default: + resp_data[2] = SMP_RESP_PHY_UNK_OP; + return; + } + + rates.minimum_linkrate = min; + rates.maximum_linkrate = max; + + if (i->dft->lldd_control_phy(sas_ha->sas_phy[phy_id], phy_op, &rates)) + resp_data[2] = SMP_RESP_FUNC_FAILED; + else + resp_data[2] = SMP_RESP_FUNC_ACC; +} + +int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, + struct request *rsp) +{ + u8 *req_data = NULL, *resp_data = NULL, *buf; + struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); + int error = -EINVAL, resp_data_len = rsp->data_len; + + /* eight is the minimum size for request and response frames */ + if (req->data_len < 8 || rsp->data_len < 8) + goto out; + + if (bio_offset(req->bio) + req->data_len > PAGE_SIZE || + bio_offset(rsp->bio) + rsp->data_len > PAGE_SIZE) { + shost_printk(KERN_ERR, shost, + "SMP request/response frame crosses page boundary"); + goto out; + } + + req_data = kzalloc(req->data_len, GFP_KERNEL); + + /* make sure frame can always be built ... we copy + * back only the requested length */ + resp_data = kzalloc(max(rsp->data_len, 128U), GFP_KERNEL); + + if (!req_data || !resp_data) { + error = -ENOMEM; + goto out; + } + + local_irq_disable(); + buf = kmap_atomic(bio_page(req->bio), KM_USER0) + bio_offset(req->bio); + memcpy(req_data, buf, req->data_len); + kunmap_atomic(buf - bio_offset(req->bio), KM_USER0); + local_irq_enable(); + + if (req_data[0] != SMP_REQUEST) + goto out; + + /* always succeeds ... even if we can't process the request + * the result is in the response frame */ + error = 0; + + /* set up default don't know response */ + resp_data[0] = SMP_RESPONSE; + resp_data[1] = req_data[1]; + resp_data[2] = SMP_RESP_FUNC_UNK; + + switch (req_data[1]) { + case SMP_REPORT_GENERAL: + req->data_len -= 8; + resp_data_len -= 32; + resp_data[2] = SMP_RESP_FUNC_ACC; + resp_data[9] = sas_ha->num_phys; + break; + + case SMP_REPORT_MANUF_INFO: + req->data_len -= 8; + resp_data_len -= 64; + resp_data[2] = SMP_RESP_FUNC_ACC; + memcpy(resp_data + 12, shost->hostt->name, + SAS_EXPANDER_VENDOR_ID_LEN); + memcpy(resp_data + 20, "libsas virt phy", + SAS_EXPANDER_PRODUCT_ID_LEN); + break; + + case SMP_READ_GPIO_REG: + /* FIXME: need GPIO support in the transport class */ + break; + + case SMP_DISCOVER: + req->data_len =- 16; + if (req->data_len < 0) { + req->data_len = 0; + error = -EINVAL; + goto out; + } + resp_data_len -= 56; + sas_host_smp_discover(sas_ha, resp_data, req_data[9]); + break; + + case SMP_REPORT_PHY_ERR_LOG: + /* FIXME: could implement this with additional + * libsas callbacks providing the HW supports it */ + break; + + case SMP_REPORT_PHY_SATA: + req->data_len =- 16; + if (req->data_len < 0) { + req->data_len = 0; + error = -EINVAL; + goto out; + } + resp_data_len -= 60; + sas_report_phy_sata(sas_ha, resp_data, req_data[9]); + break; + + case SMP_REPORT_ROUTE_INFO: + /* Can't implement; hosts have no routes */ + break; + + case SMP_WRITE_GPIO_REG: + /* FIXME: need GPIO support in the transport class */ + break; + + case SMP_CONF_ROUTE_INFO: + /* Can't implement; hosts have no routes */ + break; + + case SMP_PHY_CONTROL: + req->data_len =- 44; + if (req->data_len < 0) { + req->data_len = 0; + error = -EINVAL; + goto out; + } + resp_data_len -= 8; + sas_phy_control(sas_ha, req_data[9], req_data[10], + req_data[32] >> 4, req_data[33] >> 4, + resp_data); + break; + + case SMP_PHY_TEST_FUNCTION: + /* FIXME: should this be implemented? */ + break; + + default: + /* probably a 2.0 function */ + break; + } + + local_irq_disable(); + buf = kmap_atomic(bio_page(rsp->bio), KM_USER0) + bio_offset(rsp->bio); + memcpy(buf, resp_data, rsp->data_len); + flush_kernel_dcache_page(bio_page(rsp->bio)); + kunmap_atomic(buf - bio_offset(rsp->bio), KM_USER0); + local_irq_enable(); + rsp->data_len = resp_data_len; + + out: + kfree(req_data); + kfree(resp_data); + return error; +} diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index baa0666ffa80..b4f9368f116a 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -80,6 +80,20 @@ struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy); void sas_hae_reset(struct work_struct *work); +#ifdef CONFIG_SCSI_SAS_HOST_SMP +extern int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, + struct request *rsp); +#else +static inline int sas_smp_host_handler(struct Scsi_Host *shost, + struct request *req, + struct request *rsp) +{ + shost_printk(KERN_ERR, shost, + "Cannot send SMP to a sas host (not enabled in CONFIG)\n"); + return -EINVAL; +} +#endif + static inline void sas_queue_event(int event, spinlock_t *lock, unsigned long *pending, struct work_struct *work, diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h index 007d92904207..09125fa95b93 100644 --- a/include/scsi/scsi_transport_sas.h +++ b/include/scsi/scsi_transport_sas.h @@ -11,10 +11,10 @@ struct sas_rphy; struct request; enum sas_device_type { - SAS_PHY_UNUSED, - SAS_END_DEVICE, - SAS_EDGE_EXPANDER_DEVICE, - SAS_FANOUT_EXPANDER_DEVICE, + SAS_PHY_UNUSED = 0, + SAS_END_DEVICE = 1, + SAS_EDGE_EXPANDER_DEVICE = 2, + SAS_FANOUT_EXPANDER_DEVICE = 3, }; static inline int sas_protocol_ata(enum sas_protocol proto) -- cgit v1.2.3-59-g8ed1b From 2d4b63e1505b317d4253cee3f2970792ec6d41cb Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sat, 29 Dec 2007 11:49:53 -0600 Subject: [SCSI] libsas: don't treat underrun as an error on SMP tasks All SMP tasks sent through bsg generate messages like: sas: smp_execute_task: task to dev 500605b000001450 response: 0x0 status 0x81 Three times (because the task gets retried). Firstly, don't retry either overrun or underrun (the data buffer isn't going to change size) and secondly, just report the underrun but don't set an error for it. This is necessary so bsg can report back the residual. Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_expander.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 76555b1ddfd5..8aeaad95242c 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -109,6 +109,16 @@ static int smp_execute_task(struct domain_device *dev, void *req, int req_size, task->task_status.stat == SAM_GOOD) { res = 0; break; + } if (task->task_status.resp == SAS_TASK_COMPLETE && + task->task_status.stat == SAS_DATA_UNDERRUN) { + /* no error, but return the number of bytes of + * underrun */ + res = task->task_status.residual; + break; + } if (task->task_status.resp == SAS_TASK_COMPLETE && + task->task_status.stat == SAS_DATA_OVERRUN) { + res = -EMSGSIZE; + break; } else { SAS_DPRINTK("%s: task to dev %016llx response: 0x%x " "status 0x%x\n", __FUNCTION__, @@ -1924,6 +1934,15 @@ int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, ret = smp_execute_task(dev, bio_data(req->bio), req->data_len, bio_data(rsp->bio), rsp->data_len); + if (ret > 0) { + /* positive number is the untransferred residual */ + rsp->data_len = ret; + req->data_len = 0; + ret = 0; + } else if (ret == 0) { + rsp->data_len = 0; + req->data_len = 0; + } return ret; } -- cgit v1.2.3-59-g8ed1b From 2d507a01dac338831266b44ccbb01c69e84606ed Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sat, 29 Dec 2007 10:59:53 -0600 Subject: [SCSI] libsas, bsg: pass errors through correctly Currently in BSG, errors returned in req->errors aren't passed back to the calling programme (either via SG_IO or via read/write). Fix this, while preserving the SCSI convention of returning status in req->errors. Now update libsas to return errors correctly instead of to ignore them. Acked-by: FUJITA Tomonori Signed-off-by: James Bottomley --- block/bsg.c | 14 ++++++++++++-- drivers/scsi/scsi_transport_sas.c | 1 + 2 files changed, 13 insertions(+), 2 deletions(-) diff --git a/block/bsg.c b/block/bsg.c index 8e181ab3afb9..69b0a9d33306 100644 --- a/block/bsg.c +++ b/block/bsg.c @@ -445,6 +445,15 @@ static int blk_complete_sgv4_hdr_rq(struct request *rq, struct sg_io_v4 *hdr, else hdr->dout_resid = rq->data_len; + /* + * If the request generated a negative error number, return it + * (providing we aren't already returning an error); if it's + * just a protocol response (i.e. non negative), that gets + * processed above. + */ + if (!ret && rq->errors < 0) + ret = rq->errors; + blk_rq_unmap_user(bio); blk_put_request(rq); @@ -837,6 +846,7 @@ static long bsg_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { struct bsg_device *bd = file->private_data; int __user *uarg = (int __user *) arg; + int ret; switch (cmd) { /* @@ -889,12 +899,12 @@ static long bsg_ioctl(struct file *file, unsigned int cmd, unsigned long arg) if (rq->next_rq) bidi_bio = rq->next_rq->bio; blk_execute_rq(bd->queue, NULL, rq, 0); - blk_complete_sgv4_hdr_rq(rq, &hdr, bio, bidi_bio); + ret = blk_complete_sgv4_hdr_rq(rq, &hdr, bio, bidi_bio); if (copy_to_user(uarg, &hdr, sizeof(hdr))) return -EFAULT; - return 0; + return ret; } /* * block device ioctls diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index 87e786daa713..f2149d0bb999 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -173,6 +173,7 @@ static void sas_smp_request(struct request_queue *q, struct Scsi_Host *shost, handler = to_sas_internal(shost->transportt)->f->smp_handler; ret = handler(shost, rphy, req); + req->errors = ret; spin_lock_irq(q->queue_lock); -- cgit v1.2.3-59-g8ed1b From 32e8ae36b8f80372015b88b63c4358a376c9af0f Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sun, 30 Dec 2007 12:37:31 -0600 Subject: [SCSI] libsas: don't use made up error codes This is bad for two reasons: 1. If they're returned to outside applications, no-one knows what they mean. 2. Eventually they'll clash with the ever expanding standard error codes. The problem error code in question is ETASK. I've replaced this by ECOMM (communications error on send) a network error code that seems to most closely relay what ETASK meant. Acked-by: Darrick J. Wong Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_ata.c | 2 +- drivers/scsi/libsas/sas_expander.c | 2 +- include/scsi/libsas.h | 2 -- 3 files changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 0829b55c64d2..adc47d481f97 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -500,7 +500,7 @@ static int sas_execute_task(struct sas_task *task, void *buffer, int size, goto ex_err; } wait_for_completion(&task->completion); - res = -ETASK; + res = -ECOMM; if (task->task_state_flags & SAS_TASK_STATE_ABORTED) { int res2; SAS_DPRINTK("task aborted, flags:0x%x\n", diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 8aeaad95242c..aefd865a5788 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -96,7 +96,7 @@ static int smp_execute_task(struct domain_device *dev, void *req, int req_size, } wait_for_completion(&task->completion); - res = -ETASK; + res = -ECOMM; if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) { SAS_DPRINTK("smp task timed out or aborted\n"); i->dft->lldd_abort_task(task); diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 93248cd48373..a075f130303c 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -91,8 +91,6 @@ enum discover_event { /* ---------- Expander Devices ---------- */ -#define ETASK 0xFA - #define to_dom_device(_obj) container_of(_obj, struct domain_device, dev_obj) #define to_dev_attr(_attr) container_of(_attr, struct domain_dev_attribute,\ attr) -- cgit v1.2.3-59-g8ed1b From 210ba1d1724f5c4ed87a2ab1a21ca861a915f734 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sat, 5 Jan 2008 10:39:51 -0600 Subject: [SCSI] sr: update to follow tray status correctly Based on an original patch from: David Martin When trying to get the drive status via ioctl CDROM_DRIVE_STATUS, with no disk it gives CDS_TRAY_OPEN even if the tray is closed. ioctl works as expected with ide-cd driver. Gentoo bug report: http://bugs.gentoo.org/show_bug.cgi?id=196879 Cc: Maarten Bressers Signed-off-by: James Bottomley --- drivers/scsi/sr.c | 2 -- drivers/scsi/sr.h | 3 +++ drivers/scsi/sr_ioctl.c | 48 ++++++++++++++++++++++++++++++++++-------------- 3 files changed, 37 insertions(+), 16 deletions(-) diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index 896be4ab285d..1fcee16fa36d 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -67,8 +67,6 @@ MODULE_ALIAS_SCSI_DEVICE(TYPE_WORM); #define SR_DISKS 256 -#define MAX_RETRIES 3 -#define SR_TIMEOUT (30 * HZ) #define SR_CAPABILITIES \ (CDC_CLOSE_TRAY|CDC_OPEN_TRAY|CDC_LOCK|CDC_SELECT_SPEED| \ CDC_SELECT_DISC|CDC_MULTI_SESSION|CDC_MCN|CDC_MEDIA_CHANGED| \ diff --git a/drivers/scsi/sr.h b/drivers/scsi/sr.h index 0d04e2878c9d..81fbc0b78a52 100644 --- a/drivers/scsi/sr.h +++ b/drivers/scsi/sr.h @@ -20,6 +20,9 @@ #include #include +#define MAX_RETRIES 3 +#define SR_TIMEOUT (30 * HZ) + struct scsi_device; /* The CDROM is fairly slow, so we need a little extra time */ diff --git a/drivers/scsi/sr_ioctl.c b/drivers/scsi/sr_ioctl.c index e1589f91706a..d5cebff1d646 100644 --- a/drivers/scsi/sr_ioctl.c +++ b/drivers/scsi/sr_ioctl.c @@ -275,18 +275,6 @@ int sr_do_ioctl(Scsi_CD *cd, struct packet_command *cgc) /* ---------------------------------------------------------------------- */ /* interface to cdrom.c */ -static int test_unit_ready(Scsi_CD *cd) -{ - struct packet_command cgc; - - memset(&cgc, 0, sizeof(struct packet_command)); - cgc.cmd[0] = GPCMD_TEST_UNIT_READY; - cgc.quiet = 1; - cgc.data_direction = DMA_NONE; - cgc.timeout = IOCTL_TIMEOUT; - return sr_do_ioctl(cd, &cgc); -} - int sr_tray_move(struct cdrom_device_info *cdi, int pos) { Scsi_CD *cd = cdi->handle; @@ -310,14 +298,46 @@ int sr_lock_door(struct cdrom_device_info *cdi, int lock) int sr_drive_status(struct cdrom_device_info *cdi, int slot) { + struct scsi_cd *cd = cdi->handle; + struct scsi_sense_hdr sshdr; + struct media_event_desc med; + if (CDSL_CURRENT != slot) { /* we have no changer support */ return -EINVAL; } - if (0 == test_unit_ready(cdi->handle)) + if (0 == scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES, + &sshdr)) return CDS_DISC_OK; - return CDS_TRAY_OPEN; + if (!cdrom_get_media_event(cdi, &med)) { + if (med.media_present) + return CDS_DISC_OK; + else if (med.door_open) + return CDS_TRAY_OPEN; + else + return CDS_NO_DISC; + } + + /* + * 0x04 is format in progress .. but there must be a disc present! + */ + if (sshdr.sense_key == NOT_READY && sshdr.asc == 0x04) + return CDS_DISC_OK; + + /* + * If not using Mt Fuji extended media tray reports, + * just return TRAY_OPEN since ATAPI doesn't provide + * any other way to detect this... + */ + if (scsi_sense_valid(&sshdr) && + /* 0x3a is medium not present */ + sshdr.asc == 0x3a) + return CDS_NO_DISC; + else + return CDS_TRAY_OPEN; + + return CDS_DRIVE_NOT_READY; } int sr_disk_status(struct cdrom_device_info *cdi) -- cgit v1.2.3-59-g8ed1b From 166a72878f76e911f2d1ce4b2310d4403e94be11 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 8 Jan 2008 07:59:05 +0900 Subject: [SCSI] fix scsi_setup_command_freelist failure path race Looks like that host_cmd_pool_mutex are necessary here. Signed-off-by: FUJITA Tomonori Signed-off-by: James Bottomley --- drivers/scsi/scsi.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index ebc019380835..54ff611b8677 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -319,17 +319,16 @@ int scsi_setup_command_freelist(struct Scsi_Host *shost) GFP_KERNEL | shost->cmd_pool->gfp_mask); if (!cmd) goto fail2; - list_add(&cmd->list, &shost->free_list); + list_add(&cmd->list, &shost->free_list); return 0; fail2: + mutex_lock(&host_cmd_pool_mutex); if (!--pool->users) kmem_cache_destroy(pool->slab); - return -ENOMEM; fail: mutex_unlock(&host_cmd_pool_mutex); return -ENOMEM; - } /** -- cgit v1.2.3-59-g8ed1b From 11c3e689f1c3a73e3af7b0ea767b1b0626da8033 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Mon, 31 Dec 2007 16:37:00 -0600 Subject: [SCSI] block: Introduce new blk_queue_update_dma_alignment interface The purpose of this is to allow stacked alignment settings, with the ultimate queue alignment being set to the largest alignment requirement in the stack. The reason for this is so that the SCSI mid-layer can relax the default alignment requirements (which are basically causing a lot of superfluous copying to go on in the SG_IO interface) while allowing transports, devices or HBAs to add stricter limits if they need them. Acked-by: Jens Axboe Signed-off-by: James Bottomley --- block/ll_rw_blk.c | 24 ++++++++++++++++++++++++ include/linux/blkdev.h | 1 + 2 files changed, 25 insertions(+) diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c index 8b919940b2ab..14af36c5cdb2 100644 --- a/block/ll_rw_blk.c +++ b/block/ll_rw_blk.c @@ -759,6 +759,30 @@ void blk_queue_dma_alignment(struct request_queue *q, int mask) EXPORT_SYMBOL(blk_queue_dma_alignment); +/** + * blk_queue_update_dma_alignment - update dma length and memory alignment + * @q: the request queue for the device + * @mask: alignment mask + * + * description: + * update required memory and length aligment for direct dma transactions. + * If the requested alignment is larger than the current alignment, then + * the current queue alignment is updated to the new value, otherwise it + * is left alone. The design of this is to allow multiple objects + * (driver, device, transport etc) to set their respective + * alignments without having them interfere. + * + **/ +void blk_queue_update_dma_alignment(struct request_queue *q, int mask) +{ + BUG_ON(mask > PAGE_SIZE); + + if (mask > q->dma_alignment) + q->dma_alignment = mask; +} + +EXPORT_SYMBOL(blk_queue_update_dma_alignment); + /** * blk_queue_find_tag - find a request by its tag and queue * @q: The request queue for the device diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index d18ee67b40f8..81e99e516302 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -766,6 +766,7 @@ extern void blk_queue_segment_boundary(struct request_queue *, unsigned long); extern void blk_queue_prep_rq(struct request_queue *, prep_rq_fn *pfn); extern void blk_queue_merge_bvec(struct request_queue *, merge_bvec_fn *); extern void blk_queue_dma_alignment(struct request_queue *, int); +extern void blk_queue_update_dma_alignment(struct request_queue *, int); extern void blk_queue_softirq_done(struct request_queue *, softirq_done_fn *); extern struct backing_dev_info *blk_get_backing_dev_info(struct block_device *bdev); extern int blk_queue_ordered(struct request_queue *, unsigned, prepare_flush_fn *); -- cgit v1.2.3-59-g8ed1b From 465ff3185e0cb76d46137335a4d21d0d9d3ac8a2 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Tue, 1 Jan 2008 10:00:10 -0600 Subject: [SCSI] relax scsi dma alignment This patch relaxes the default SCSI DMA alignment from 512 bytes to 4 bytes. I remember from previous discussions that usb and firewire have sector size alignment requirements, so I upped their alignments in the respective slave allocs. The reason for doing this is so that we don't get such a huge amount of copy overhead in bio_copy_user() for udev. (basically all inquiries it issues can now be directly mapped). Acked-by: Alan Stern Signed-off-by: James Bottomley --- drivers/ata/libata-scsi.c | 5 ++++- drivers/firewire/fw-sbp2.c | 6 ++++++ drivers/ieee1394/sbp2.c | 6 ++++++ drivers/scsi/scsi_lib.c | 8 ++++++++ drivers/usb/storage/scsiglue.c | 20 ++++++++++---------- 5 files changed, 34 insertions(+), 11 deletions(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 264ae60e3fd8..4bb268b9aaeb 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -824,6 +824,9 @@ static void ata_scsi_sdev_config(struct scsi_device *sdev) * requests. */ sdev->max_device_blocked = 1; + + /* set the min alignment */ + blk_queue_update_dma_alignment(sdev->request_queue, ATA_DMA_PAD_SZ - 1); } static void ata_scsi_dev_config(struct scsi_device *sdev, @@ -878,7 +881,7 @@ int ata_scsi_slave_config(struct scsi_device *sdev) if (dev) ata_scsi_dev_config(sdev, dev); - return 0; /* scsi layer doesn't check return value, sigh */ + return 0; } /** diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index 624ff3e082f6..c2169d215bf7 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -1238,6 +1238,12 @@ static int sbp2_scsi_slave_alloc(struct scsi_device *sdev) sdev->allow_restart = 1; + /* + * Update the dma alignment (minimum alignment requirements for + * start and end of DMA transfers) to be a sector + */ + blk_queue_update_dma_alignment(sdev->request_queue, 511); + if (lu->tgt->workarounds & SBP2_WORKAROUND_INQUIRY_36) sdev->inquiry_len = 36; diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index b83d254bc86e..1eda11abeb1e 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -1963,6 +1963,12 @@ static int sbp2scsi_slave_alloc(struct scsi_device *sdev) lu->sdev = sdev; sdev->allow_restart = 1; + /* + * Update the dma alignment (minimum alignment requirements for + * start and end of DMA transfers) to be a sector + */ + blk_queue_update_dma_alignment(sdev->request_queue, 511); + if (lu->workarounds & SBP2_WORKAROUND_INQUIRY_36) sdev->inquiry_len = 36; return 0; diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index db52222885b7..de601370c05b 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1668,6 +1668,14 @@ struct request_queue *__scsi_alloc_queue(struct Scsi_Host *shost, if (!shost->use_clustering) clear_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags); + + /* + * set a reasonable default alignment on word boundaries: the + * host and device may alter it using + * blk_queue_update_dma_alignment() later. + */ + blk_queue_dma_alignment(q, 0x03); + return q; } EXPORT_SYMBOL(__scsi_alloc_queue); diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 7c9593b7b04e..dd8b13ef2414 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -81,6 +81,16 @@ static int slave_alloc (struct scsi_device *sdev) */ sdev->inquiry_len = 36; + /* Scatter-gather buffers (all but the last) must have a length + * divisible by the bulk maxpacket size. Otherwise a data packet + * would end up being short, causing a premature end to the data + * transfer. Since high-speed bulk pipes have a maxpacket size + * of 512, we'll use that as the scsi device queue's DMA alignment + * mask. Guaranteeing proper alignment of the first buffer will + * have the desired effect because, except at the beginning and + * the end, scatter-gather buffers follow page boundaries. */ + blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1)); + /* * The UFI spec treates the Peripheral Qualifier bits in an * INQUIRY result as reserved and requires devices to set them @@ -100,16 +110,6 @@ static int slave_configure(struct scsi_device *sdev) { struct us_data *us = host_to_us(sdev->host); - /* Scatter-gather buffers (all but the last) must have a length - * divisible by the bulk maxpacket size. Otherwise a data packet - * would end up being short, causing a premature end to the data - * transfer. Since high-speed bulk pipes have a maxpacket size - * of 512, we'll use that as the scsi device queue's DMA alignment - * mask. Guaranteeing proper alignment of the first buffer will - * have the desired effect because, except at the beginning and - * the end, scatter-gather buffers follow page boundaries. */ - blk_queue_dma_alignment(sdev->request_queue, (512 - 1)); - /* Many devices have trouble transfering more than 32KB at a time, * while others have trouble with more than 64K. At this time we * are limiting both to 32K (64 sectores). -- cgit v1.2.3-59-g8ed1b From 15e7b4452b72ae890f2fcb027b4c4fa63a1c9a7a Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Mon, 14 Jan 2008 17:07:57 +1100 Subject: [CRYPTO] twofish: Merge common glue code There is almost no difference between 32 & 64 bit glue code. Signed-off-by: Sebastian Siewior Signed-off-by: Herbert Xu --- arch/x86/crypto/Makefile | 4 +- arch/x86/crypto/twofish_32.c | 97 ------------------------------------------ arch/x86/crypto/twofish_64.c | 97 ------------------------------------------ arch/x86/crypto/twofish_glue.c | 97 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 99 insertions(+), 196 deletions(-) delete mode 100644 arch/x86/crypto/twofish_32.c delete mode 100644 arch/x86/crypto/twofish_64.c create mode 100644 arch/x86/crypto/twofish_glue.c diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile index 09200e12f14d..3874c2de5403 100644 --- a/arch/x86/crypto/Makefile +++ b/arch/x86/crypto/Makefile @@ -11,9 +11,9 @@ obj-$(CONFIG_CRYPTO_TWOFISH_X86_64) += twofish-x86_64.o obj-$(CONFIG_CRYPTO_SALSA20_X86_64) += salsa20-x86_64.o aes-i586-y := aes-i586-asm_32.o aes_glue.o -twofish-i586-y := twofish-i586-asm_32.o twofish_32.o +twofish-i586-y := twofish-i586-asm_32.o twofish_glue.o salsa20-i586-y := salsa20-i586-asm_32.o salsa20_glue.o aes-x86_64-y := aes-x86_64-asm_64.o aes_glue.o -twofish-x86_64-y := twofish-x86_64-asm_64.o twofish_64.o +twofish-x86_64-y := twofish-x86_64-asm_64.o twofish_glue.o salsa20-x86_64-y := salsa20-x86_64-asm_64.o salsa20_glue.o diff --git a/arch/x86/crypto/twofish_32.c b/arch/x86/crypto/twofish_32.c deleted file mode 100644 index e3004dfe9c7a..000000000000 --- a/arch/x86/crypto/twofish_32.c +++ /dev/null @@ -1,97 +0,0 @@ -/* - * Glue Code for optimized 586 assembler version of TWOFISH - * - * Originally Twofish for GPG - * By Matthew Skala , July 26, 1998 - * 256-bit key length added March 20, 1999 - * Some modifications to reduce the text size by Werner Koch, April, 1998 - * Ported to the kerneli patch by Marc Mutz - * Ported to CryptoAPI by Colin Slater - * - * The original author has disclaimed all copyright interest in this - * code and thus put it in the public domain. The subsequent authors - * have put this under the GNU General Public License. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - * - * This code is a "clean room" implementation, written from the paper - * _Twofish: A 128-Bit Block Cipher_ by Bruce Schneier, John Kelsey, - * Doug Whiting, David Wagner, Chris Hall, and Niels Ferguson, available - * through http://www.counterpane.com/twofish.html - * - * For background information on multiplication in finite fields, used for - * the matrix operations in the key schedule, see the book _Contemporary - * Abstract Algebra_ by Joseph A. Gallian, especially chapter 22 in the - * Third Edition. - */ - -#include -#include -#include -#include -#include - - -asmlinkage void twofish_enc_blk(struct crypto_tfm *tfm, u8 *dst, const u8 *src); -asmlinkage void twofish_dec_blk(struct crypto_tfm *tfm, u8 *dst, const u8 *src); - -static void twofish_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) -{ - twofish_enc_blk(tfm, dst, src); -} - -static void twofish_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) -{ - twofish_dec_blk(tfm, dst, src); -} - -static struct crypto_alg alg = { - .cra_name = "twofish", - .cra_driver_name = "twofish-i586", - .cra_priority = 200, - .cra_flags = CRYPTO_ALG_TYPE_CIPHER, - .cra_blocksize = TF_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct twofish_ctx), - .cra_alignmask = 3, - .cra_module = THIS_MODULE, - .cra_list = LIST_HEAD_INIT(alg.cra_list), - .cra_u = { - .cipher = { - .cia_min_keysize = TF_MIN_KEY_SIZE, - .cia_max_keysize = TF_MAX_KEY_SIZE, - .cia_setkey = twofish_setkey, - .cia_encrypt = twofish_encrypt, - .cia_decrypt = twofish_decrypt - } - } -}; - -static int __init init(void) -{ - return crypto_register_alg(&alg); -} - -static void __exit fini(void) -{ - crypto_unregister_alg(&alg); -} - -module_init(init); -module_exit(fini); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION ("Twofish Cipher Algorithm, i586 asm optimized"); -MODULE_ALIAS("twofish"); diff --git a/arch/x86/crypto/twofish_64.c b/arch/x86/crypto/twofish_64.c deleted file mode 100644 index 182d91d5cfb9..000000000000 --- a/arch/x86/crypto/twofish_64.c +++ /dev/null @@ -1,97 +0,0 @@ -/* - * Glue Code for optimized x86_64 assembler version of TWOFISH - * - * Originally Twofish for GPG - * By Matthew Skala , July 26, 1998 - * 256-bit key length added March 20, 1999 - * Some modifications to reduce the text size by Werner Koch, April, 1998 - * Ported to the kerneli patch by Marc Mutz - * Ported to CryptoAPI by Colin Slater - * - * The original author has disclaimed all copyright interest in this - * code and thus put it in the public domain. The subsequent authors - * have put this under the GNU General Public License. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - * - * This code is a "clean room" implementation, written from the paper - * _Twofish: A 128-Bit Block Cipher_ by Bruce Schneier, John Kelsey, - * Doug Whiting, David Wagner, Chris Hall, and Niels Ferguson, available - * through http://www.counterpane.com/twofish.html - * - * For background information on multiplication in finite fields, used for - * the matrix operations in the key schedule, see the book _Contemporary - * Abstract Algebra_ by Joseph A. Gallian, especially chapter 22 in the - * Third Edition. - */ - -#include -#include -#include -#include -#include -#include - -asmlinkage void twofish_enc_blk(struct crypto_tfm *tfm, u8 *dst, const u8 *src); -asmlinkage void twofish_dec_blk(struct crypto_tfm *tfm, u8 *dst, const u8 *src); - -static void twofish_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) -{ - twofish_enc_blk(tfm, dst, src); -} - -static void twofish_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) -{ - twofish_dec_blk(tfm, dst, src); -} - -static struct crypto_alg alg = { - .cra_name = "twofish", - .cra_driver_name = "twofish-x86_64", - .cra_priority = 200, - .cra_flags = CRYPTO_ALG_TYPE_CIPHER, - .cra_blocksize = TF_BLOCK_SIZE, - .cra_ctxsize = sizeof(struct twofish_ctx), - .cra_alignmask = 3, - .cra_module = THIS_MODULE, - .cra_list = LIST_HEAD_INIT(alg.cra_list), - .cra_u = { - .cipher = { - .cia_min_keysize = TF_MIN_KEY_SIZE, - .cia_max_keysize = TF_MAX_KEY_SIZE, - .cia_setkey = twofish_setkey, - .cia_encrypt = twofish_encrypt, - .cia_decrypt = twofish_decrypt - } - } -}; - -static int __init init(void) -{ - return crypto_register_alg(&alg); -} - -static void __exit fini(void) -{ - crypto_unregister_alg(&alg); -} - -module_init(init); -module_exit(fini); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION ("Twofish Cipher Algorithm, x86_64 asm optimized"); -MODULE_ALIAS("twofish"); diff --git a/arch/x86/crypto/twofish_glue.c b/arch/x86/crypto/twofish_glue.c new file mode 100644 index 000000000000..cefaf8b9aa18 --- /dev/null +++ b/arch/x86/crypto/twofish_glue.c @@ -0,0 +1,97 @@ +/* + * Glue Code for assembler optimized version of TWOFISH + * + * Originally Twofish for GPG + * By Matthew Skala , July 26, 1998 + * 256-bit key length added March 20, 1999 + * Some modifications to reduce the text size by Werner Koch, April, 1998 + * Ported to the kerneli patch by Marc Mutz + * Ported to CryptoAPI by Colin Slater + * + * The original author has disclaimed all copyright interest in this + * code and thus put it in the public domain. The subsequent authors + * have put this under the GNU General Public License. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + * + * This code is a "clean room" implementation, written from the paper + * _Twofish: A 128-Bit Block Cipher_ by Bruce Schneier, John Kelsey, + * Doug Whiting, David Wagner, Chris Hall, and Niels Ferguson, available + * through http://www.counterpane.com/twofish.html + * + * For background information on multiplication in finite fields, used for + * the matrix operations in the key schedule, see the book _Contemporary + * Abstract Algebra_ by Joseph A. Gallian, especially chapter 22 in the + * Third Edition. + */ + +#include +#include +#include +#include +#include + +asmlinkage void twofish_enc_blk(struct crypto_tfm *tfm, u8 *dst, const u8 *src); +asmlinkage void twofish_dec_blk(struct crypto_tfm *tfm, u8 *dst, const u8 *src); + +static void twofish_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) +{ + twofish_enc_blk(tfm, dst, src); +} + +static void twofish_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) +{ + twofish_dec_blk(tfm, dst, src); +} + +static struct crypto_alg alg = { + .cra_name = "twofish", + .cra_driver_name = "twofish-asm", + .cra_priority = 200, + .cra_flags = CRYPTO_ALG_TYPE_CIPHER, + .cra_blocksize = TF_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct twofish_ctx), + .cra_alignmask = 3, + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(alg.cra_list), + .cra_u = { + .cipher = { + .cia_min_keysize = TF_MIN_KEY_SIZE, + .cia_max_keysize = TF_MAX_KEY_SIZE, + .cia_setkey = twofish_setkey, + .cia_encrypt = twofish_encrypt, + .cia_decrypt = twofish_decrypt + } + } +}; + +static int __init init(void) +{ + return crypto_register_alg(&alg); +} + +static void __exit fini(void) +{ + crypto_unregister_alg(&alg); +} + +module_init(init); +module_exit(fini); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION ("Twofish Cipher Algorithm, asm optimized"); +MODULE_ALIAS("twofish"); +MODULE_ALIAS("twofish-asm"); -- cgit v1.2.3-59-g8ed1b From d1154be3004e9db2d61533e16bb2cf85dd27a8cb Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Tue, 15 Jan 2008 00:47:47 -0500 Subject: ACPI: processor: Fix null pointer dereference in throttling http://bugzilla.kernel.org/show_bug.cgi?id=9747 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/processor_throttling.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 6742d7bc4777..1685b40abda7 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -775,12 +775,12 @@ int acpi_processor_get_throttling_info(struct acpi_processor *pr) acpi_processor_get_throttling_states(pr) || acpi_processor_get_platform_limit(pr)) { - if (acpi_processor_get_fadt_info(pr)) - return 0; pr->throttling.acpi_processor_get_throttling = &acpi_processor_get_throttling_fadt; pr->throttling.acpi_processor_set_throttling = &acpi_processor_set_throttling_fadt; + if (acpi_processor_get_fadt_info(pr)) + return 0; } else { pr->throttling.acpi_processor_get_throttling = &acpi_processor_get_throttling_ptc; -- cgit v1.2.3-59-g8ed1b From ed2b91701d97047fa9970645e43d5e551e261adb Mon Sep 17 00:00:00 2001 From: Steve French Date: Sun, 20 Jan 2008 00:30:29 +0000 Subject: [CIFS] Do not log path names in lookup errors Andi Kleen noticed that we were logging access denied errors (which is noisy in the dmesg log, and not needed to be logged) and that we were logging path names on that an other errors (e.g. EIO) which we should not be doing. CC: Andi Kleen Signed-off-by: Steve French --- fs/cifs/dir.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index 37dc97af1487..699ec1198409 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -517,12 +517,10 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry, d_add(direntry, NULL); /* if it was once a directory (but how can we tell?) we could do shrink_dcache_parent(direntry); */ - } else { - cERROR(1, ("Error 0x%x on cifs_get_inode_info in lookup of %s", - rc, full_path)); - /* BB special case check for Access Denied - watch security - exposure of returning dir info implicitly via different rc - if file exists or not but no access BB */ + } else if (rc != -EACCES) { + cERROR(1, ("Unexpected lookup error %d", rc)); + /* We special case check for Access Denied - since that + is a common return code */ } kfree(full_path); -- cgit v1.2.3-59-g8ed1b From a1f35ba374bc421ab33e40163be2b57995b09962 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Mon, 21 Jan 2008 17:22:46 -0800 Subject: [SPARC64]: Fix of section mismatch warnings. Fix following Section mismatch warning in sparc64: WARNING: arch/sparc64/kernel/built-in.o(.text+0x13dec): Section mismatch: reference to .devinit.text:pci_scan_one_pbm (between 'psycho_scan_bus' and 'psycho_pbm_init') WARNING: arch/sparc64/kernel/built-in.o(.text+0x14b58): Section mismatch: reference to .devinit.text:pci_scan_one_pbm (between 'sabre_scan_bus' and 'sabre_init') WARNING: arch/sparc64/kernel/built-in.o(.text+0x15ea4): Section mismatch: reference to .devinit.text:pci_scan_one_pbm (between 'schizo_scan_bus' and 'schizo_pbm_init') WARNING: arch/sparc64/kernel/built-in.o(.text+0x17780): Section mismatch: reference to .devinit.text:pci_scan_one_pbm (between 'pci_sun4v_scan_bus' and 'pci_sun4v_get_head') WARNING: arch/sparc64/kernel/built-in.o(.text+0x17d5c): Section mismatch: reference to .devinit.text:pci_scan_one_pbm (between 'pci_fire_scan_bus' and 'pci_fire_get_head') WARNING: arch/sparc64/kernel/built-in.o(.text+0x23860): Section mismatch: reference to .devinit.text:vio_dev_release (between 'vio_create_one' and 'vio_add') WARNING: arch/sparc64/kernel/built-in.o(.text+0x23868): Section mismatch: reference to .devinit.text:vio_dev_release (between 'vio_create_one' and 'vio_add') The pci_* were all missing __init annotations. For the vio.c case it was a function with a wrong annotation which was removed. Signed-off-by: Sam Ravnborg Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_fire.c | 8 ++++---- arch/sparc64/kernel/pci_psycho.c | 6 +++--- arch/sparc64/kernel/pci_sabre.c | 7 ++++--- arch/sparc64/kernel/pci_schizo.c | 17 +++++++++-------- arch/sparc64/kernel/pci_sun4v.c | 5 +++-- arch/sparc64/kernel/vio.c | 2 +- 6 files changed, 24 insertions(+), 21 deletions(-) diff --git a/arch/sparc64/kernel/pci_fire.c b/arch/sparc64/kernel/pci_fire.c index fef3b37487bf..7571ed563147 100644 --- a/arch/sparc64/kernel/pci_fire.c +++ b/arch/sparc64/kernel/pci_fire.c @@ -30,7 +30,7 @@ "i" (ASI_PHYS_BYPASS_EC_E) \ : "memory") -static void pci_fire_scan_bus(struct pci_pbm_info *pbm) +static void __init pci_fire_scan_bus(struct pci_pbm_info *pbm) { pbm->pci_bus = pci_scan_one_pbm(pbm); @@ -434,8 +434,8 @@ static void pci_fire_hw_init(struct pci_pbm_info *pbm) fire_write(pbm->pbm_regs + FIRE_PEC_IENAB, ~(u64)0); } -static int pci_fire_pbm_init(struct pci_controller_info *p, - struct device_node *dp, u32 portid) +static int __init pci_fire_pbm_init(struct pci_controller_info *p, + struct device_node *dp, u32 portid) { const struct linux_prom64_registers *regs; struct pci_pbm_info *pbm; @@ -488,7 +488,7 @@ static inline int portid_compare(u32 x, u32 y) return 0; } -void fire_pci_init(struct device_node *dp, const char *model_name) +void __init fire_pci_init(struct device_node *dp, const char *model_name) { struct pci_controller_info *p; u32 portid = of_getintprop_default(dp, "portid", 0xff); diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c index d27ee5d528a2..0bad96e5d184 100644 --- a/arch/sparc64/kernel/pci_psycho.c +++ b/arch/sparc64/kernel/pci_psycho.c @@ -801,7 +801,7 @@ static void pbm_config_busmastering(struct pci_pbm_info *pbm) pci_config_write8(addr, 64); } -static void psycho_scan_bus(struct pci_pbm_info *pbm) +static void __init psycho_scan_bus(struct pci_pbm_info *pbm) { pbm_config_busmastering(pbm); pbm->is_66mhz_capable = 0; @@ -965,7 +965,7 @@ static void psycho_pbm_strbuf_init(struct pci_pbm_info *pbm, #define PSYCHO_MEMSPACE_B 0x180000000UL #define PSYCHO_MEMSPACE_SIZE 0x07fffffffUL -static void psycho_pbm_init(struct pci_controller_info *p, +static void __init psycho_pbm_init(struct pci_controller_info *p, struct device_node *dp, int is_pbm_a) { struct property *prop; @@ -1012,7 +1012,7 @@ static void psycho_pbm_init(struct pci_controller_info *p, #define PSYCHO_CONFIGSPACE 0x001000000UL -void psycho_init(struct device_node *dp, char *model_name) +void __init psycho_init(struct device_node *dp, char *model_name) { struct linux_prom64_registers *pr_regs; struct pci_controller_info *p; diff --git a/arch/sparc64/kernel/pci_sabre.c b/arch/sparc64/kernel/pci_sabre.c index fba67c3d8809..1c5f5fa2339f 100644 --- a/arch/sparc64/kernel/pci_sabre.c +++ b/arch/sparc64/kernel/pci_sabre.c @@ -633,7 +633,7 @@ static void apb_init(struct pci_bus *sabre_bus) } } -static void sabre_scan_bus(struct pci_pbm_info *pbm) +static void __init sabre_scan_bus(struct pci_pbm_info *pbm) { static int once; @@ -731,7 +731,8 @@ static int sabre_iommu_init(struct pci_pbm_info *pbm, return 0; } -static void sabre_pbm_init(struct pci_controller_info *p, struct pci_pbm_info *pbm, struct device_node *dp) +static void __init sabre_pbm_init(struct pci_controller_info *p, + struct pci_pbm_info *pbm, struct device_node *dp) { pbm->name = dp->full_name; printk("%s: SABRE PCI Bus Module\n", pbm->name); @@ -750,7 +751,7 @@ static void sabre_pbm_init(struct pci_controller_info *p, struct pci_pbm_info *p pci_determine_mem_io_space(pbm); } -void sabre_init(struct device_node *dp, char *model_name) +void __init sabre_init(struct device_node *dp, char *model_name) { const struct linux_prom64_registers *pr_regs; struct pci_controller_info *p; diff --git a/arch/sparc64/kernel/pci_schizo.c b/arch/sparc64/kernel/pci_schizo.c index e752e75cce83..e30609362322 100644 --- a/arch/sparc64/kernel/pci_schizo.c +++ b/arch/sparc64/kernel/pci_schizo.c @@ -1084,7 +1084,7 @@ static void pbm_config_busmastering(struct pci_pbm_info *pbm) pci_config_write8(addr, 64); } -static void schizo_scan_bus(struct pci_pbm_info *pbm) +static void __init schizo_scan_bus(struct pci_pbm_info *pbm) { pbm_config_busmastering(pbm); pbm->is_66mhz_capable = @@ -1333,9 +1333,9 @@ static void schizo_pbm_hw_init(struct pci_pbm_info *pbm) } } -static int schizo_pbm_init(struct pci_controller_info *p, - struct device_node *dp, u32 portid, - int chip_type) +static int __init schizo_pbm_init(struct pci_controller_info *p, + struct device_node *dp, u32 portid, + int chip_type) { const struct linux_prom64_registers *regs; struct pci_pbm_info *pbm; @@ -1430,7 +1430,8 @@ static inline int portid_compare(u32 x, u32 y, int chip_type) return (x == y); } -static void __schizo_init(struct device_node *dp, char *model_name, int chip_type) +static void __init __schizo_init(struct device_node *dp, char *model_name, + int chip_type) { struct pci_controller_info *p; struct pci_pbm_info *pbm; @@ -1474,17 +1475,17 @@ fatal_memory_error: prom_halt(); } -void schizo_init(struct device_node *dp, char *model_name) +void __init schizo_init(struct device_node *dp, char *model_name) { __schizo_init(dp, model_name, PBM_CHIP_TYPE_SCHIZO); } -void schizo_plus_init(struct device_node *dp, char *model_name) +void __init schizo_plus_init(struct device_node *dp, char *model_name) { __schizo_init(dp, model_name, PBM_CHIP_TYPE_SCHIZO_PLUS); } -void tomatillo_init(struct device_node *dp, char *model_name) +void __init tomatillo_init(struct device_node *dp, char *model_name) { __schizo_init(dp, model_name, PBM_CHIP_TYPE_TOMATILLO); } diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index e587a372f3fe..1aa8e044b105 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -612,7 +612,7 @@ const struct dma_ops sun4v_dma_ops = { .sync_sg_for_cpu = dma_4v_sync_sg_for_cpu, }; -static void pci_sun4v_scan_bus(struct pci_pbm_info *pbm) +static void __init pci_sun4v_scan_bus(struct pci_pbm_info *pbm) { struct property *prop; struct device_node *dp; @@ -960,7 +960,8 @@ static void pci_sun4v_msi_init(struct pci_pbm_info *pbm) } #endif /* !(CONFIG_PCI_MSI) */ -static void __init pci_sun4v_pbm_init(struct pci_controller_info *p, struct device_node *dp, u32 devhandle) +static void __init pci_sun4v_pbm_init(struct pci_controller_info *p, + struct device_node *dp, u32 devhandle) { struct pci_pbm_info *pbm; diff --git a/arch/sparc64/kernel/vio.c b/arch/sparc64/kernel/vio.c index 0c1ee619d814..e78b3517940b 100644 --- a/arch/sparc64/kernel/vio.c +++ b/arch/sparc64/kernel/vio.c @@ -131,7 +131,7 @@ void vio_unregister_driver(struct vio_driver *viodrv) } EXPORT_SYMBOL(vio_unregister_driver); -static void __devinit vio_dev_release(struct device *dev) +static void vio_dev_release(struct device *dev) { kfree(to_vio_dev(dev)); } -- cgit v1.2.3-59-g8ed1b From 2ad913babd5d597f9d9d71d9e93dd589d55e66cd Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Mon, 21 Jan 2008 17:25:37 -0800 Subject: [SPARC64]: Fix section error in sparcspkr With a sparc64 defconfig modified to set CONFIG_HOTPLUG=n the following error happened during link of vmlinux: local symbol 0: discarded in section `.devexit.text' from drivers/built-in.o local symbol 1: discarded in section `.devexit.text' from drivers/built-in.o (The error message above is from kbuild.git but it happens in mainline too) The error happens becase there is a reference from .text/.data to a function marked __devexit. With CONFIG_HOTPLUG=n all code marked __devexit are discarded and the linker complains. It was tracked down to sparcspkr.c which were missing __devexit_p() around the function pointers. Unfortunately modpost did not catch this since modpost do not warn about references from .data to .devexit from variables named *_driver. Signed-off-by: Sam Ravnborg Signed-off-by: David S. Miller --- drivers/input/misc/sparcspkr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/input/misc/sparcspkr.c b/drivers/input/misc/sparcspkr.c index a3637d870880..fed3c375ccf3 100644 --- a/drivers/input/misc/sparcspkr.c +++ b/drivers/input/misc/sparcspkr.c @@ -195,7 +195,7 @@ static struct of_platform_driver ebus_beep_driver = { .name = "beep", .match_table = ebus_beep_match, .probe = ebus_beep_probe, - .remove = sparcspkr_remove, + .remove = __devexit_p(sparcspkr_remove), .shutdown = sparcspkr_shutdown, }; @@ -236,7 +236,7 @@ static struct of_platform_driver isa_beep_driver = { .name = "beep", .match_table = isa_beep_match, .probe = isa_beep_probe, - .remove = sparcspkr_remove, + .remove = __devexit_p(sparcspkr_remove), .shutdown = sparcspkr_shutdown, }; -- cgit v1.2.3-59-g8ed1b From 872e2be7c4056496c2871bd9b0f2fae6c374fe47 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Tue, 22 Jan 2008 18:29:20 -0800 Subject: [SPARC]: Constify function pointer tables. Signed-off-by: Jan Engelhardt Signed-off-by: David S. Miller --- arch/sparc/kernel/setup.c | 2 +- arch/sparc64/kernel/setup.c | 2 +- arch/sparc64/solaris/socksys.c | 2 +- fs/openpromfs/inode.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/sparc/kernel/setup.c b/arch/sparc/kernel/setup.c index f8228383895a..d07bc74773aa 100644 --- a/arch/sparc/kernel/setup.c +++ b/arch/sparc/kernel/setup.c @@ -379,7 +379,7 @@ static void c_stop(struct seq_file *m, void *v) { } -struct seq_operations cpuinfo_op = { +const struct seq_operations cpuinfo_op = { .start =c_start, .next = c_next, .stop = c_stop, diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index 0f5be828ee92..a813441b358f 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -421,7 +421,7 @@ static void c_stop(struct seq_file *m, void *v) { } -struct seq_operations cpuinfo_op = { +const struct seq_operations cpuinfo_op = { .start =c_start, .next = c_next, .stop = c_stop, diff --git a/arch/sparc64/solaris/socksys.c b/arch/sparc64/solaris/socksys.c index 7736411f244f..5f064183c874 100644 --- a/arch/sparc64/solaris/socksys.c +++ b/arch/sparc64/solaris/socksys.c @@ -54,7 +54,7 @@ extern void mykfree(void *); static unsigned int (*sock_poll)(struct file *, poll_table *); -static struct file_operations socksys_file_ops = { +static const struct file_operations socksys_file_ops = { /* Currently empty */ }; diff --git a/fs/openpromfs/inode.c b/fs/openpromfs/inode.c index d88173840082..6b7ff1618945 100644 --- a/fs/openpromfs/inode.c +++ b/fs/openpromfs/inode.c @@ -131,7 +131,7 @@ static void property_stop(struct seq_file *f, void *v) /* Nothing to do */ } -static struct seq_operations property_op = { +static const struct seq_operations property_op = { .start = property_start, .next = property_next, .stop = property_stop, -- cgit v1.2.3-59-g8ed1b From ffe188dd83e84119516688c822388c8f30a54877 Mon Sep 17 00:00:00 2001 From: Peter Schwenke Date: Thu, 17 Jan 2008 23:08:55 +1000 Subject: ata_piix: Add Toshiba Satellite R20 and Tecra M6 to broken suspend list. Add Toshiba Satellite R20 and Tecra M6 to broken suspend list. Matt Piermarini reported and provided the M6 patch. This is from OSDL bug 7780. Signed-off-by: Peter Schwenke Cc: Matt Piermarini Acked-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index b406b39b878e..0d8bd19a5345 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1033,6 +1033,13 @@ static int piix_broken_suspend(void) DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M5"), }, }, + { + .ident = "TECRA M6", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M6"), + }, + }, { .ident = "TECRA M7", .matches = { @@ -1047,6 +1054,13 @@ static int piix_broken_suspend(void) DMI_MATCH(DMI_PRODUCT_NAME, "TECRA A8"), }, }, + { + .ident = "Satellite R20", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "Satellite R20"), + }, + }, { .ident = "Satellite R25", .matches = { -- cgit v1.2.3-59-g8ed1b From ae8d4ee7ff429136c8b482c3b38ed994c021d3fc Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sun, 4 Nov 2007 22:05:49 -0500 Subject: libata: Disable ATA8-ACS proposed Trusted Computing features by default Historically word 48 in the identify data was used to mean 32bit I/O was supported for VLB IDE etc. ATA8 reassigns this word to the Trusted Computing Group, where it is used for TCG features. This means that an ATA8 TCG drive is going to trigger 32bit I/O on some systems which will be funny. Anyway we need to sort this out ready for ATA8 so: - Reorder the ata.h header a bit so the ata_version function occurs early in it - Make dword_io check the ATA version - Add an ATA8 version checking TCG presence test While we are at it the current drafts have a flaw where it may not be possible to disable TCG features at boot (and opt out of the trusted model) as TCG intends because it relies on presence of a different optional feature (DCS). Handle this in software by refusing the TCG commands if libata.allow_tpm is not set. (We must make it possible as some environments such as proprietary VDR devices will doubtless want to use it to lock up content) Finally as with CPRM print a warning so that the user knows they may not be able to full access and use the device. Signed-off-by: Alan Cox --- drivers/ata/libata-core.c | 12 +++++++++++- drivers/ata/libata-scsi.c | 18 ++++++++++++++++++ drivers/ata/libata.h | 1 + include/linux/ata.h | 22 +++++++++++++++++++++- 4 files changed, 51 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 6380726f7538..9b7f3c477730 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -119,6 +119,10 @@ int libata_noacpi = 0; module_param_named(noacpi, libata_noacpi, int, 0444); MODULE_PARM_DESC(noacpi, "Disables the use of ACPI in probe/suspend/resume when set"); +int libata_allow_tpm = 0; +module_param_named(allow_tpm, libata_allow_tpm, int, 0444); +MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands"); + MODULE_AUTHOR("Jeff Garzik"); MODULE_DESCRIPTION("Library module for ATA devices"); MODULE_LICENSE("GPL"); @@ -2161,8 +2165,14 @@ int ata_dev_configure(struct ata_device *dev) "supports DRM functions and may " "not be fully accessable.\n"); snprintf(revbuf, 7, "CFA"); - } else + } else { snprintf(revbuf, 7, "ATA-%d", ata_id_major_version(id)); + /* Warn the user if the device has TPM extensions */ + if (ata_id_has_tpm(id)) + ata_dev_printk(dev, KERN_WARNING, + "supports DRM functions and may " + "not be fully accessable.\n"); + } dev->n_sectors = ata_id_n_sectors(id); diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 14daf4848f09..f802dbce41ae 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2690,6 +2690,24 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc) if ((tf->protocol = ata_scsi_map_proto(cdb[1])) == ATA_PROT_UNKNOWN) goto invalid_fld; + /* + * Filter TPM commands by default. These provide an + * essentially uncontrolled encrypted "back door" between + * applications and the disk. Set libata.allow_tpm=1 if you + * have a real reason for wanting to use them. This ensures + * that installed software cannot easily mess stuff up without + * user intent. DVR type users will probably ship with this enabled + * for movie content management. + * + * Note that for ATA8 we can issue a DCS change and DCS freeze lock + * for this and should do in future but that it is not sufficient as + * DCS is an optional feature set. Thus we also do the software filter + * so that we comply with the TC consortium stated goal that the user + * can turn off TC features of their system. + */ + if (tf->command >= 0x5C && tf->command <= 0x5F && !libata_allow_tpm) + goto invalid_fld; + /* We may not issue DMA commands if no DMA mode is set */ if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0) goto invalid_fld; diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index bbe59c2fd1e2..048e26cfb339 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -60,6 +60,7 @@ extern int atapi_dmadir; extern int atapi_passthru16; extern int libata_fua; extern int libata_noacpi; +extern int libata_allow_tpm; extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev); extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, u64 block, u32 n_block, unsigned int tf_flags, diff --git a/include/linux/ata.h b/include/linux/ata.h index e672e80202a8..3fbe6d7784ab 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -379,7 +379,6 @@ struct ata_taskfile { #define ata_id_has_ncq(id) ((id)[76] & (1 << 8)) #define ata_id_queue_depth(id) (((id)[75] & 0x1f) + 1) #define ata_id_removeable(id) ((id)[0] & (1 << 7)) -#define ata_id_has_dword_io(id) ((id)[48] & (1 << 0)) #define ata_id_has_atapi_AN(id) \ ( (((id)[76] != 0x0000) && ((id)[76] != 0xffff)) && \ ((id)[78] & (1 << 5)) ) @@ -415,6 +414,7 @@ static inline bool ata_id_has_dipm(const u16 *id) return val & (1 << 3); } + static inline int ata_id_has_fua(const u16 *id) { if ((id[84] & 0xC000) != 0x4000) @@ -519,6 +519,26 @@ static inline int ata_id_is_sata(const u16 *id) return ata_id_major_version(id) >= 5 && id[93] == 0; } +static inline int ata_id_has_tpm(const u16 *id) +{ + /* The TPM bits are only valid on ATA8 */ + if (ata_id_major_version(id) < 8) + return 0; + if ((id[48] & 0xC000) != 0x4000) + return 0; + return id[48] & (1 << 0); +} + +static inline int ata_id_has_dword_io(const u16 *id) +{ + /* ATA 8 reuses this flag for "trusted" computing */ + if (ata_id_major_version(id) > 7) + return 0; + if (id[48] & (1 << 0)) + return 1; + return 0; +} + static inline int ata_id_current_chs_valid(const u16 *id) { /* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command -- cgit v1.2.3-59-g8ed1b From bd3adca52bc43b72c75db3e4c7809d47923b154c Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Fri, 2 Nov 2007 09:32:38 +0800 Subject: libata-acpi: add ACPI _PSx method ACPI spec (ver 3.0a, p289) requires IDE power on/off executes ACPI _PSx methods. As recently most PATA drivers use libata, this patch adds _PSx method support in libata. ACPI spec doesn't mention if SATA requires the same _PSx method. Signed-off-by: Shaohua Li Acked-by: Len Brown Signed-off-by: Jeff Garzik --- drivers/ata/libata-acpi.c | 30 ++++++++++++++++++++++++++++++ drivers/ata/libata-eh.c | 3 +++ drivers/ata/libata.h | 3 +++ 3 files changed, 36 insertions(+) diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index 7bf4befd96bc..ebc4dfcf2f19 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -775,6 +775,36 @@ void ata_acpi_on_resume(struct ata_port *ap) } } +/** + * ata_acpi_set_state - set the port power state + * @ap: target ATA port + * @state: state, on/off + * + * This function executes the _PS0/_PS3 ACPI method to set the power state. + * ACPI spec requires _PS0 when IDE power on and _PS3 when power off + */ +void ata_acpi_set_state(struct ata_port *ap, pm_message_t state) +{ + struct ata_device *dev; + + if (!ap->acpi_handle || (ap->flags & ATA_FLAG_ACPI_SATA)) + return; + + /* channel first and then drives for power on and vica versa + for power off */ + if (state.event == PM_EVENT_ON) + acpi_bus_set_power(ap->acpi_handle, ACPI_STATE_D0); + + ata_link_for_each_dev(dev, &ap->link) { + if (dev->acpi_handle && ata_dev_enabled(dev)) + acpi_bus_set_power(dev->acpi_handle, + state.event == PM_EVENT_ON ? + ACPI_STATE_D0 : ACPI_STATE_D3); + } + if (state.event != PM_EVENT_ON) + acpi_bus_set_power(ap->acpi_handle, ACPI_STATE_D3); +} + /** * ata_acpi_on_devcfg - ATA ACPI hook called on device donfiguration * @dev: target ATA device diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 21a81cd148e4..1d7faab64810 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2747,6 +2747,7 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap) if (ap->ops->port_suspend) rc = ap->ops->port_suspend(ap, ap->pm_mesg); + ata_acpi_set_state(ap, PMSG_SUSPEND); out: /* report result */ spin_lock_irqsave(ap->lock, flags); @@ -2792,6 +2793,8 @@ static void ata_eh_handle_port_resume(struct ata_port *ap) WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED)); + ata_acpi_set_state(ap, PMSG_ON); + if (ap->ops->port_resume) rc = ap->ops->port_resume(ap); diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 048e26cfb339..8cf0874f248b 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -114,6 +114,7 @@ extern int ata_acpi_on_suspend(struct ata_port *ap); extern void ata_acpi_on_resume(struct ata_port *ap); extern int ata_acpi_on_devcfg(struct ata_device *dev); extern void ata_acpi_on_disable(struct ata_device *dev); +extern void ata_acpi_set_state(struct ata_port *ap, pm_message_t state); #else static inline void ata_acpi_associate_sata_port(struct ata_port *ap) { } static inline void ata_acpi_associate(struct ata_host *host) { } @@ -122,6 +123,8 @@ static inline int ata_acpi_on_suspend(struct ata_port *ap) { return 0; } static inline void ata_acpi_on_resume(struct ata_port *ap) { } static inline int ata_acpi_on_devcfg(struct ata_device *dev) { return 0; } static inline void ata_acpi_on_disable(struct ata_device *dev) { } +static inline void ata_acpi_set_state(struct ata_port *ap, + pm_message_t state) { } #endif /* libata-scsi.c */ -- cgit v1.2.3-59-g8ed1b From b9f8ab2dafba2dc12dd94e5d2db31d5cf495775f Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 Nov 2007 14:33:11 +0000 Subject: libata: IORDY handling I believe this version meets all Sergei's objections Correct the logic for when we issue a set features for transfer mode - If the device has IORDY and the controller has IORDY - set the mode - If the device has IORDY and the controller does not - turn IORDY off - If neither has IORDY do nothing Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 9b7f3c477730..3dd0e942df36 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4373,7 +4373,14 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev) tf.feature = SETFEATURES_XFER; tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_POLLING; tf.protocol = ATA_PROT_NODATA; - tf.nsect = dev->xfer_mode; + /* If we are using IORDY we must send the mode setting command */ + if (ata_pio_need_iordy(dev)) + tf.nsect = dev->xfer_mode; + /* If the device has IORDY and the controller does not - turn it off */ + else if (ata_id_has_iordy(dev->id)) + tf.nsect = 0x01; + else /* In the ancient relic department - skip all of this */ + return 0; err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); -- cgit v1.2.3-59-g8ed1b From 76548eda8c47e50260bc87196d40b26ce7a7bcd6 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 Nov 2007 14:34:56 +0000 Subject: libata-sff: tf_load Jeff said he preferred that the SFF tf_load followed the spec and we documented that anyone who needed different overrode it, rather than it using the ->check_status methods. No driver relies on the current behaviour. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/libata-sff.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index b7ac80b4b1fb..fd5fe4e7e75a 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -147,7 +147,9 @@ void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) * @tf: ATA taskfile register set for storing input * * Reads ATA taskfile registers for currently-selected device - * into @tf. + * into @tf. Assumes the device has a fully SFF compliant task file + * layout and behaviour. If you device does not (eg has a different + * status method) then you will need to provide a replacement tf_read * * LOCKING: * Inherited from caller. @@ -156,7 +158,7 @@ void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; - tf->command = ata_chk_status(ap); + tf->command = ata_check_status(ap); tf->feature = ioread8(ioaddr->error_addr); tf->nsect = ioread8(ioaddr->nsect_addr); tf->lbal = ioread8(ioaddr->lbal_addr); -- cgit v1.2.3-59-g8ed1b From 51dbd490614e6228e9b2b198bd4f5f76ef961059 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 Nov 2007 14:45:53 +0000 Subject: pata_ninja32: Cardbus ATA initial support Lots of work needed to bring it up to scratch but it does work so you can now use the card. That makes it at least useful, especially as the other cardbus cards are usually INIC162x which aren't yet supported well. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/Kconfig | 9 ++ drivers/ata/Makefile | 1 + drivers/ata/pata_ninja32.c | 212 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 222 insertions(+) create mode 100644 drivers/ata/pata_ninja32.c diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index ba63619ae5df..2478cca653de 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -459,6 +459,15 @@ config PATA_NETCELL If unsure, say N. +config PATA_NINJA32 + tristate "Ninja32/Delkin Cardbus ATA support (Experimental)" + depends on PCI && EXPERIMENTAL + help + This option enables support for the Ninja32, Delkin and + possibly other brands of Cardbus ATA adapter + + If unsure, say N. + config PATA_NS87410 tristate "Nat Semi NS87410 PATA support (Experimental)" depends on PCI && EXPERIMENTAL diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index b13feb2c5dae..82550c16818c 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_PATA_IT821X) += pata_it821x.o obj-$(CONFIG_PATA_IT8213) += pata_it8213.o obj-$(CONFIG_PATA_JMICRON) += pata_jmicron.o obj-$(CONFIG_PATA_NETCELL) += pata_netcell.o +obj-$(CONFIG_PATA_NINJA32) += pata_ninja32.o obj-$(CONFIG_PATA_NS87410) += pata_ns87410.o obj-$(CONFIG_PATA_NS87415) += pata_ns87415.o obj-$(CONFIG_PATA_OPTI) += pata_opti.o diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c new file mode 100644 index 000000000000..04acd3f86120 --- /dev/null +++ b/drivers/ata/pata_ninja32.c @@ -0,0 +1,212 @@ +/* + * pata_ninja32.c - Ninja32 PATA for new ATA layer + * (C) 2007 Red Hat Inc + * Alan Cox + * + * Note: The controller like many controllers has shared timings for + * PIO and DMA. We thus flip to the DMA timings in dma_start and flip back + * in the dma_stop function. Thus we actually don't need a set_dmamode + * method as the PIO method is always called and will set the right PIO + * timing parameters. + * + * The Ninja32 Cardbus is not a generic SFF controller. Instead it is + * laid out as follows off BAR 0. This is based upon Mark Lord's delkin + * driver and the extensive analysis done by the BSD developers, notably + * ITOH Yasufumi. + * + * Base + 0x00 IRQ Status + * Base + 0x01 IRQ control + * Base + 0x02 Chipset control + * Base + 0x04 VDMA and reset control + wait bits + * Base + 0x08 BMIMBA + * Base + 0x0C DMA Length + * Base + 0x10 Taskfile + * Base + 0x18 BMDMA Status ? + * Base + 0x1C + * Base + 0x1D Bus master control + * bit 0 = enable + * bit 1 = 0 write/1 read + * bit 2 = 1 sgtable + * bit 3 = go + * bit 4-6 wait bits + * bit 7 = done + * Base + 0x1E AltStatus + * Base + 0x1F timing register + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_ninja32" +#define DRV_VERSION "0.0.1" + + +/** + * ninja32_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. Our timing registers are shared + * but we want to set the PIO timing by default. + */ + +static void ninja32_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + static u16 pio_timing[5] = { + 0xd6, 0x85, 0x44, 0x33, 0x13 + }; + iowrite8(pio_timing[adev->pio_mode - XFER_PIO_0], ap->ioaddr.bmdma_addr + 0x1f); + ap->private_data = adev; +} + + +static void ninja32_dev_select(struct ata_port *ap, unsigned int device) +{ + struct ata_device *adev = &ap->link.device[device]; + if (ap->private_data != adev) { + iowrite8(0xd6, ap->ioaddr.bmdma_addr + 0x1f); + ata_std_dev_select(ap, device); + ninja32_set_piomode(ap, adev); + } +} + +static struct scsi_host_template ninja32_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations ninja32_port_ops = { + .set_piomode = ninja32_set_piomode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ninja32_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_40wire, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + + .data_xfer = ata_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + + .port_start = ata_sff_port_start, +}; + +static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + struct ata_host *host; + struct ata_port *ap; + void __iomem *base; + int rc; + + host = ata_host_alloc(&dev->dev, 1); + if (!host) + return -ENOMEM; + ap = host->ports[0]; + + /* Set up the PCI device */ + rc = pcim_enable_device(dev); + if (rc) + return rc; + rc = pcim_iomap_regions(dev, 1 << 0, DRV_NAME); + if (rc == -EBUSY) + pcim_pin_device(dev); + if (rc) + return rc; + + host->iomap = pcim_iomap_table(dev); + rc = pci_set_dma_mask(dev, ATA_DMA_MASK); + if (rc) + return rc; + rc = pci_set_consistent_dma_mask(dev, ATA_DMA_MASK); + if (rc) + return rc; + pci_set_master(dev); + + /* Set up the register mappings */ + base = host->iomap[0]; + if (!base) + return -ENOMEM; + ap->ops = &ninja32_port_ops; + ap->pio_mask = 0x1F; + ap->flags |= ATA_FLAG_SLAVE_POSS; + + ap->ioaddr.cmd_addr = base + 0x10; + ap->ioaddr.ctl_addr = base + 0x1E; + ap->ioaddr.altstatus_addr = base + 0x1E; + ap->ioaddr.bmdma_addr = base; + ata_std_ports(&ap->ioaddr); + + iowrite8(0x05, base + 0x01); /* Enable interrupt lines */ + iowrite8(0xB3, base + 0x02); /* Burst, ?? setup */ + iowrite8(0x00, base + 0x04); /* WAIT0 ? */ + /* FIXME: Should we disable them at remove ? */ + return ata_host_activate(host, dev->irq, ata_interrupt, IRQF_SHARED, &ninja32_sht); +} + +static const struct pci_device_id ninja32[] = { + { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { }, +}; + +static struct pci_driver ninja32_pci_driver = { + .name = DRV_NAME, + .id_table = ninja32, + .probe = ninja32_init_one, + .remove = ata_pci_remove_one +}; + +static int __init ninja32_init(void) +{ + return pci_register_driver(&ninja32_pci_driver); +} + +static void __exit ninja32_exit(void) +{ + pci_unregister_driver(&ninja32_pci_driver); +} + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Ninja32 ATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, ninja32); +MODULE_VERSION(DRV_VERSION); + +module_init(ninja32_init); +module_exit(ninja32_exit); -- cgit v1.2.3-59-g8ed1b From 49f290903935612aadab3899a4aca884c1140348 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 19 Nov 2007 16:03:44 +0900 Subject: ahci: update PCS programming For intel ones, ahci unconditionally OR'd 0xf to PCS. This isn't correct for the following cases. * ich6/7m's which only implement P0 and P2 (0xf works fine tho) * ich8/9's which have six ports and needs 0x3f to enable all ports This patch updates PCS programming such that... * port_map determined by ahci_save_initial_config() is OR'd instead of 0xf * PCS is updated only if necessary (there are turned off enable bits) port_map is determined from PORTS_IMPL PCI register which is implemented as write or write-once register. If the register isn't programmed, ahci automatically generates it from number of ports, which is good enough for PCS programming. ICH6/7M are probably the only ones where non-contiguous enable bits are necessary && PORTS_IMPL isn't programmed properly but they're proven to work reliably with 0xf anyway. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 54f38c21dd95..ef5e6b6e6e69 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1036,6 +1036,7 @@ static int ahci_deinit_port(struct ata_port *ap, const char **emsg) static int ahci_reset_controller(struct ata_host *host) { struct pci_dev *pdev = to_pci_dev(host->dev); + struct ahci_host_priv *hpriv = host->private_data; void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; u32 tmp; @@ -1078,8 +1079,10 @@ static int ahci_reset_controller(struct ata_host *host) /* configure PCS */ pci_read_config_word(pdev, 0x92, &tmp16); - tmp16 |= 0xf; - pci_write_config_word(pdev, 0x92, tmp16); + if ((tmp16 & hpriv->port_map) != hpriv->port_map) { + tmp16 |= hpriv->port_map; + pci_write_config_word(pdev, 0x92, tmp16); + } } return 0; -- cgit v1.2.3-59-g8ed1b From 11b7becca9425aab50807503c8102b2db9e5ecf0 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Fri, 23 Nov 2007 21:12:14 -0500 Subject: libata: checkpatch fixes Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 6 +++--- drivers/ata/pata_ali.c | 2 +- drivers/ata/pata_ninja32.c | 10 ++++++---- 3 files changed, 10 insertions(+), 8 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 3dd0e942df36..bb9e025522ba 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4374,11 +4374,11 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev) tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_POLLING; tf.protocol = ATA_PROT_NODATA; /* If we are using IORDY we must send the mode setting command */ - if (ata_pio_need_iordy(dev)) - tf.nsect = dev->xfer_mode; + if (ata_pio_need_iordy(dev)) + tf.nsect = dev->xfer_mode; /* If the device has IORDY and the controller does not - turn it off */ else if (ata_id_has_iordy(dev->id)) - tf.nsect = 0x01; + tf.nsect = 0x01; else /* In the ancient relic department - skip all of this */ return 0; diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index 8caf9afc8b90..7e68edf3c0f3 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -64,7 +64,7 @@ static int ali_cable_override(struct pci_dev *pdev) if (pdev->subsystem_vendor == 0x10CF && pdev->subsystem_device == 0x10AF) return 1; /* Mitac 8317 (Winbook-A) and relatives */ - if (pdev->subsystem_vendor == 0x1071 && pdev->subsystem_device == 0x8317) + if (pdev->subsystem_vendor == 0x1071 && pdev->subsystem_device == 0x8317) return 1; /* Systems by DMI */ if (dmi_check_system(cable_dmi_table)) diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c index 04acd3f86120..1c1b83541d13 100644 --- a/drivers/ata/pata_ninja32.c +++ b/drivers/ata/pata_ninja32.c @@ -61,7 +61,8 @@ static void ninja32_set_piomode(struct ata_port *ap, struct ata_device *adev) static u16 pio_timing[5] = { 0xd6, 0x85, 0x44, 0x33, 0x13 }; - iowrite8(pio_timing[adev->pio_mode - XFER_PIO_0], ap->ioaddr.bmdma_addr + 0x1f); + iowrite8(pio_timing[adev->pio_mode - XFER_PIO_0], + ap->ioaddr.bmdma_addr + 0x1f); ap->private_data = adev; } @@ -176,12 +177,13 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) iowrite8(0xB3, base + 0x02); /* Burst, ?? setup */ iowrite8(0x00, base + 0x04); /* WAIT0 ? */ /* FIXME: Should we disable them at remove ? */ - return ata_host_activate(host, dev->irq, ata_interrupt, IRQF_SHARED, &ninja32_sht); + return ata_host_activate(host, dev->irq, ata_interrupt, + IRQF_SHARED, &ninja32_sht); } static const struct pci_device_id ninja32[] = { - { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { }, }; -- cgit v1.2.3-59-g8ed1b From f20ded38aa54b92dd0af32578b8916d0aa2d9e05 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 27 Nov 2007 19:28:52 +0900 Subject: libata: rearrange ATA_DFLAG_* Area for DFLAGs which are cleared on INIT is full. Extend it by 8 bits. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/linux/libata.h b/include/linux/libata.h index 124033cb5e9b..ca347b018649 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -143,10 +143,10 @@ enum { ATA_DFLAG_NCQ_OFF = (1 << 13), /* device limited to non-NCQ mode */ ATA_DFLAG_SPUNDOWN = (1 << 14), /* XXX: for spindown_compat */ ATA_DFLAG_SLEEPING = (1 << 15), /* device is sleeping */ - ATA_DFLAG_INIT_MASK = (1 << 16) - 1, + ATA_DFLAG_INIT_MASK = (1 << 24) - 1, - ATA_DFLAG_DETACH = (1 << 16), - ATA_DFLAG_DETACHED = (1 << 17), + ATA_DFLAG_DETACH = (1 << 24), + ATA_DFLAG_DETACHED = (1 << 25), ATA_DEV_UNKNOWN = 0, /* unknown device */ ATA_DEV_ATA = 1, /* ATA device */ -- cgit v1.2.3-59-g8ed1b From 405e66b38797875e80669eaf72d313dbb76533c3 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 27 Nov 2007 19:28:53 +0900 Subject: libata: implement protocol tests Implement protocol tests - ata_is_atapi(), ata_is_nodata(), ata_is_pio(), ata_is_dma(), ata_is_ncq() and ata_is_data() and use them to replace is_atapi_taskfile() and hard coded protocol tests. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 2 +- drivers/ata/libata-core.c | 36 +++++----------------- drivers/ata/sata_fsl.c | 2 +- drivers/ata/sata_sil.c | 10 +++--- drivers/ata/sata_sil24.c | 24 +++------------ drivers/scsi/libsas/sas_ata.c | 2 +- include/linux/ata.h | 71 ++++++++++++++++++++++++++++++++++++++----- 7 files changed, 82 insertions(+), 65 deletions(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index ef5e6b6e6e69..5eee91c73c90 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1511,7 +1511,7 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct ahci_port_priv *pp = ap->private_data; - int is_atapi = is_atapi_taskfile(&qc->tf); + int is_atapi = ata_is_atapi(qc->tf.protocol); void *cmd_tbl; u32 opts; const u32 cmd_fis_len = 5; /* five dwords */ diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index bb9e025522ba..8c7af2c8e8d4 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5358,7 +5358,7 @@ static inline int ata_hsm_ok_in_wq(struct ata_port *ap, struct ata_queued_cmd *q (qc->tf.flags & ATA_TFLAG_WRITE)) return 1; - if (is_atapi_taskfile(&qc->tf) && + if (ata_is_atapi(qc->tf.protocol) && !(qc->dev->flags & ATA_DFLAG_CDB_INTR)) return 1; } @@ -5955,30 +5955,6 @@ int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active, return nr_done; } -static inline int ata_should_dma_map(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - - switch (qc->tf.protocol) { - case ATA_PROT_NCQ: - case ATA_PROT_DMA: - case ATA_PROT_ATAPI_DMA: - return 1; - - case ATA_PROT_ATAPI: - case ATA_PROT_PIO: - if (ap->flags & ATA_FLAG_PIO_DMA) - return 1; - - /* fall through */ - - default: - return 0; - } - - /* never reached */ -} - /** * ata_qc_issue - issue taskfile to device * @qc: command to issue to device @@ -5995,6 +5971,7 @@ void ata_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct ata_link *link = qc->dev->link; + u8 prot = qc->tf.protocol; /* Make sure only one non-NCQ command is outstanding. The * check is skipped for old EH because it reuses active qc to @@ -6002,7 +5979,7 @@ void ata_qc_issue(struct ata_queued_cmd *qc) */ WARN_ON(ap->ops->error_handler && ata_tag_valid(link->active_tag)); - if (qc->tf.protocol == ATA_PROT_NCQ) { + if (prot == ATA_PROT_NCQ) { WARN_ON(link->sactive & (1 << qc->tag)); if (!link->sactive) @@ -6018,7 +5995,8 @@ void ata_qc_issue(struct ata_queued_cmd *qc) qc->flags |= ATA_QCFLAG_ACTIVE; ap->qc_active |= 1 << qc->tag; - if (ata_should_dma_map(qc)) { + if (ata_is_dma(prot) || (ata_is_pio(prot) && + (ap->flags & ATA_FLAG_PIO_DMA))) { if (qc->flags & ATA_QCFLAG_SG) { if (ata_sg_setup(qc)) goto sg_err; @@ -6217,8 +6195,8 @@ inline unsigned int ata_host_intr(struct ata_port *ap, */ /* Check the ATA_DFLAG_CDB_INTR flag is enough here. - * The flag was turned on only for atapi devices. - * No need to check is_atapi_taskfile(&qc->tf) again. + * The flag was turned on only for atapi devices. No + * need to check ata_is_atapi(qc->tf.protocol) again. */ if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) goto idle_irq; diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index d015b4adcfe0..a3c33f165427 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -417,7 +417,7 @@ static void sata_fsl_qc_prep(struct ata_queued_cmd *qc) } /* setup "ACMD - atapi command" in cmd. desc. if this is ATAPI cmd */ - if (is_atapi_taskfile(&qc->tf)) { + if (ata_is_atapi(qc->tf.protocol)) { desc_info |= ATAPI_CMD; memset((void *)&cd->acmd, 0, 32); memcpy((void *)&cd->acmd, qc->cdb, qc->dev->cdb_len); diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index f5119bf40c24..0b8191b52f97 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -416,15 +416,14 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2) */ /* Check the ATA_DFLAG_CDB_INTR flag is enough here. - * The flag was turned on only for atapi devices. - * No need to check is_atapi_taskfile(&qc->tf) again. + * The flag was turned on only for atapi devices. No + * need to check ata_is_atapi(qc->tf.protocol) again. */ if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) goto err_hsm; break; case HSM_ST_LAST: - if (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATA_PROT_ATAPI_DMA) { + if (ata_is_dma(qc->tf.protocol)) { /* clear DMA-Start bit */ ap->ops->bmdma_stop(qc); @@ -451,8 +450,7 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2) /* kick HSM in the ass */ ata_hsm_move(ap, qc, status, 0); - if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATA_PROT_ATAPI_DMA)) + if (unlikely(qc->err_mask) && ata_is_dma(qc->tf.protocol)) ata_ehi_push_desc(ehi, "BMDMA2 stat 0x%x", bmdma2); return; diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index 864c1c1b8511..fdd3ceac329b 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -852,9 +852,7 @@ static int sil24_qc_defer(struct ata_queued_cmd *qc) * set. * */ - int is_excl = (prot == ATA_PROT_ATAPI || - prot == ATA_PROT_ATAPI_NODATA || - prot == ATA_PROT_ATAPI_DMA || + int is_excl = (ata_is_atapi(prot) || (qc->flags & ATA_QCFLAG_RESULT_TF)); if (unlikely(ap->excl_link)) { @@ -885,35 +883,21 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc) cb = &pp->cmd_block[sil24_tag(qc->tag)]; - switch (qc->tf.protocol) { - case ATA_PROT_PIO: - case ATA_PROT_DMA: - case ATA_PROT_NCQ: - case ATA_PROT_NODATA: + if (!ata_is_atapi(qc->tf.protocol)) { prb = &cb->ata.prb; sge = cb->ata.sge; - break; - - case ATA_PROT_ATAPI: - case ATA_PROT_ATAPI_DMA: - case ATA_PROT_ATAPI_NODATA: + } else { prb = &cb->atapi.prb; sge = cb->atapi.sge; memset(cb->atapi.cdb, 0, 32); memcpy(cb->atapi.cdb, qc->cdb, qc->dev->cdb_len); - if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) { + if (ata_is_data(qc->tf.protocol)) { if (qc->tf.flags & ATA_TFLAG_WRITE) ctrl = PRB_CTRL_PACKET_WRITE; else ctrl = PRB_CTRL_PACKET_READ; } - break; - - default: - prb = NULL; /* shut up, gcc */ - sge = NULL; - BUG(); } prb->ctrl = cpu_to_le16(ctrl); diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 0829b55c64d2..831294de1d8d 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -176,7 +176,7 @@ static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc) ata_tf_to_fis(&qc->tf, 1, 0, (u8*)&task->ata_task.fis); task->uldd_task = qc; - if (is_atapi_taskfile(&qc->tf)) { + if (ata_is_atapi(qc->tf.protocol)) { memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len); task->total_xfer_len = qc->nbytes + qc->pad_len; task->num_scatter = qc->pad_len ? qc->n_elem + 1 : qc->n_elem; diff --git a/include/linux/ata.h b/include/linux/ata.h index 3fbe6d7784ab..43fecf62773a 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -324,6 +324,13 @@ enum { ATA_TFLAG_LBA = (1 << 4), /* enable LBA */ ATA_TFLAG_FUA = (1 << 5), /* enable FUA */ ATA_TFLAG_POLLING = (1 << 6), /* set nIEN to 1 and use polling */ + + /* protocol flags */ + ATA_PROT_FLAG_PIO = (1 << 0), /* is PIO */ + ATA_PROT_FLAG_DMA = (1 << 1), /* is DMA */ + ATA_PROT_FLAG_DATA = ATA_PROT_FLAG_PIO | ATA_PROT_FLAG_DMA, + ATA_PROT_FLAG_NCQ = (1 << 2), /* is NCQ */ + ATA_PROT_FLAG_ATAPI = (1 << 3), /* is ATAPI */ }; enum ata_tf_protocols { @@ -373,6 +380,63 @@ struct ata_taskfile { u8 command; /* IO operation */ }; +/* + * protocol tests + */ +static inline unsigned int ata_prot_flags(u8 prot) +{ + switch (prot) { + case ATA_PROT_NODATA: + return 0; + case ATA_PROT_PIO: + return ATA_PROT_FLAG_PIO; + case ATA_PROT_DMA: + return ATA_PROT_FLAG_DMA; + case ATA_PROT_NCQ: + return ATA_PROT_FLAG_DMA | ATA_PROT_FLAG_NCQ; + case ATA_PROT_ATAPI_NODATA: + return ATA_PROT_FLAG_ATAPI; + case ATA_PROT_ATAPI: + return ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_PIO; + case ATA_PROT_ATAPI_DMA: + return ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_DMA; + } + return 0; +} + +static inline int ata_is_atapi(u8 prot) +{ + return ata_prot_flags(prot) & ATA_PROT_FLAG_ATAPI; +} + +static inline int ata_is_nodata(u8 prot) +{ + return !(ata_prot_flags(prot) & ATA_PROT_FLAG_DATA); +} + +static inline int ata_is_pio(u8 prot) +{ + return ata_prot_flags(prot) & ATA_PROT_FLAG_PIO; +} + +static inline int ata_is_dma(u8 prot) +{ + return ata_prot_flags(prot) & ATA_PROT_FLAG_DMA; +} + +static inline int ata_is_ncq(u8 prot) +{ + return ata_prot_flags(prot) & ATA_PROT_FLAG_NCQ; +} + +static inline int ata_is_data(u8 prot) +{ + return ata_prot_flags(prot) & ATA_PROT_FLAG_DATA; +} + +/* + * id tests + */ #define ata_id_is_ata(id) (((id)[0] & (1 << 15)) == 0) #define ata_id_has_lba(id) ((id)[49] & (1 << 9)) #define ata_id_has_dma(id) ((id)[49] & (1 << 8)) @@ -594,13 +658,6 @@ static inline int atapi_command_packet_set(const u16 *dev_id) return (dev_id[0] >> 8) & 0x1f; } -static inline int is_atapi_taskfile(const struct ata_taskfile *tf) -{ - return (tf->protocol == ATA_PROT_ATAPI) || - (tf->protocol == ATA_PROT_ATAPI_NODATA) || - (tf->protocol == ATA_PROT_ATAPI_DMA); -} - static inline int is_multi_taskfile(struct ata_taskfile *tf) { return (tf->command == ATA_CMD_READ_MULTI) || -- cgit v1.2.3-59-g8ed1b From 02c05a27e884c9655dae5b1c8bc0cd89c060c43d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 27 Nov 2007 19:28:54 +0900 Subject: libata: factor out ata_eh_schedule_probe() Factor out ata_eh_schedule_probe() from ata_eh_handle_dev_fail() and ata_eh_recover(). This is to improve maintainability and make future changes easier. In the previous revision, ata_dev_enabled() test was accidentally dropped while factoring out. This problem was spotted by Bartlomiej. Signed-off-by: Tejun Heo Cc: Bartlomiej Zolnierkiewicz Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 38 +++++++++++++++++++++----------------- 1 file changed, 21 insertions(+), 17 deletions(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 1d7faab64810..b16c81a24ba3 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2375,6 +2375,22 @@ static int ata_eh_skip_recovery(struct ata_link *link) return 1; } +static int ata_eh_schedule_probe(struct ata_device *dev) +{ + struct ata_eh_context *ehc = &dev->link->eh_context; + + if (!(ehc->i.probe_mask & (1 << dev->devno)) || + (ehc->did_probe_mask & (1 << dev->devno))) + return 0; + + ata_eh_detach_dev(dev); + ata_dev_init(dev); + ehc->did_probe_mask |= (1 << dev->devno); + ehc->i.action |= ATA_EH_SOFTRESET; + + return 1; +} + static int ata_eh_handle_dev_fail(struct ata_device *dev, int err) { struct ata_eh_context *ehc = &dev->link->eh_context; @@ -2406,16 +2422,9 @@ static int ata_eh_handle_dev_fail(struct ata_device *dev, int err) if (ata_link_offline(dev->link)) ata_eh_detach_dev(dev); - /* probe if requested */ - if ((ehc->i.probe_mask & (1 << dev->devno)) && - !(ehc->did_probe_mask & (1 << dev->devno))) { - ata_eh_detach_dev(dev); - ata_dev_init(dev); - + /* schedule probe if necessary */ + if (ata_eh_schedule_probe(dev)) ehc->tries[dev->devno] = ATA_EH_DEV_TRIES; - ehc->did_probe_mask |= (1 << dev->devno); - ehc->i.action |= ATA_EH_SOFTRESET; - } return 1; } else { @@ -2492,14 +2501,9 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, if (dev->flags & ATA_DFLAG_DETACH) ata_eh_detach_dev(dev); - if (!ata_dev_enabled(dev) && - ((ehc->i.probe_mask & (1 << dev->devno)) && - !(ehc->did_probe_mask & (1 << dev->devno)))) { - ata_eh_detach_dev(dev); - ata_dev_init(dev); - ehc->did_probe_mask |= (1 << dev->devno); - ehc->i.action |= ATA_EH_SOFTRESET; - } + /* schedule probe if necessary */ + if (!ata_dev_enabled(dev)) + ata_eh_schedule_probe(dev); } } -- cgit v1.2.3-59-g8ed1b From 6f1d1e3a03fd04a9d9c82fd3cf414020097bb142 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 27 Nov 2007 19:28:55 +0900 Subject: libata: move ata_set_mode() to libata-eh.c Move ata_set_mode() to libata-eh.c. ata_set_mode() is surely an EH action and will be more tightly coupled with the rest of error handling. Move it to libata-eh.c. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 25 ------------------------- drivers/ata/libata-eh.c | 25 +++++++++++++++++++++++++ drivers/ata/libata.h | 2 +- 3 files changed, 26 insertions(+), 26 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 8c7af2c8e8d4..86c10cc751e9 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -3182,31 +3182,6 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) return rc; } -/** - * ata_set_mode - Program timings and issue SET FEATURES - XFER - * @link: link on which timings will be programmed - * @r_failed_dev: out paramter for failed device - * - * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If - * ata_set_mode() fails, pointer to the failing device is - * returned in @r_failed_dev. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - * RETURNS: - * 0 on success, negative errno otherwise - */ -int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) -{ - struct ata_port *ap = link->ap; - - /* has private set_mode? */ - if (ap->ops->set_mode) - return ap->ops->set_mode(link, r_failed_dev); - return ata_do_set_mode(link, r_failed_dev); -} - /** * ata_tf_to_host - issue ATA taskfile to host controller * @ap: port to which command is being issued diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index b16c81a24ba3..ebab75958900 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2329,6 +2329,31 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link, return rc; } +/** + * ata_set_mode - Program timings and issue SET FEATURES - XFER + * @link: link on which timings will be programmed + * @r_failed_dev: out paramter for failed device + * + * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If + * ata_set_mode() fails, pointer to the failing device is + * returned in @r_failed_dev. + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * 0 on success, negative errno otherwise + */ +int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) +{ + struct ata_port *ap = link->ap; + + /* has private set_mode? */ + if (ap->ops->set_mode) + return ap->ops->set_mode(link, r_failed_dev); + return ata_do_set_mode(link, r_failed_dev); +} + static int ata_link_nr_enabled(struct ata_link *link) { struct ata_device *dev; diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 8cf0874f248b..409ffb9af163 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -86,7 +86,6 @@ extern int ata_dev_configure(struct ata_device *dev); extern int sata_down_spd_limit(struct ata_link *link); extern int sata_set_spd_needed(struct ata_link *link); extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel); -extern int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev); extern void ata_sg_clean(struct ata_queued_cmd *qc); extern void ata_qc_free(struct ata_queued_cmd *qc); extern void ata_qc_issue(struct ata_queued_cmd *qc); @@ -187,6 +186,7 @@ extern void ata_eh_report(struct ata_port *ap); extern int ata_eh_reset(struct ata_link *link, int classify, ata_prereset_fn_t prereset, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset); +extern int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev); extern int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset, -- cgit v1.2.3-59-g8ed1b From 3884f7b0a8382b89d8ca5da23bd98e3e15fc805b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 27 Nov 2007 19:28:56 +0900 Subject: libata: clean up EH speed down implementation Clean up EH speed down implementation. * is_io boolean variable is replaced eflags. is_io is ATA_EFLAG_IS_IO. * Error categories now have names. * Better comments. * Reorder 5min and 10min rules in ata_eh_speed_down_verdict() * Use local variable @link to cache @dev->link in ata_eh_speed_down() These changes are to improve readability and ease further changes. This patch doesn't introduce any behavior change. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 117 ++++++++++++++++++++++++++++++------------------ include/linux/libata.h | 2 +- 2 files changed, 74 insertions(+), 45 deletions(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index ebab75958900..b01ade102727 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -46,9 +46,20 @@ #include "libata.h" enum { + /* speed down verdicts */ ATA_EH_SPDN_NCQ_OFF = (1 << 0), ATA_EH_SPDN_SPEED_DOWN = (1 << 1), ATA_EH_SPDN_FALLBACK_TO_PIO = (1 << 2), + + /* error flags */ + ATA_EFLAG_IS_IO = (1 << 0), + + /* error categories */ + ATA_ECAT_NONE = 0, + ATA_ECAT_ATA_BUS = 1, + ATA_ECAT_TOUT_HSM = 2, + ATA_ECAT_UNK_DEV = 3, + ATA_ECAT_NR = 4, }; /* Waiting in ->prereset can never be reliable. It's sometimes nice @@ -218,7 +229,7 @@ void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset, #endif /* CONFIG_PCI */ -static void ata_ering_record(struct ata_ering *ering, int is_io, +static void ata_ering_record(struct ata_ering *ering, unsigned int eflags, unsigned int err_mask) { struct ata_ering_entry *ent; @@ -229,7 +240,7 @@ static void ata_ering_record(struct ata_ering *ering, int is_io, ering->cursor %= ATA_ERING_SIZE; ent = &ering->ring[ering->cursor]; - ent->is_io = is_io; + ent->eflags = eflags; ent->err_mask = err_mask; ent->timestamp = get_jiffies_64(); } @@ -1451,20 +1462,20 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc, return action; } -static int ata_eh_categorize_error(int is_io, unsigned int err_mask) +static int ata_eh_categorize_error(unsigned int eflags, unsigned int err_mask) { if (err_mask & AC_ERR_ATA_BUS) - return 1; + return ATA_ECAT_ATA_BUS; if (err_mask & AC_ERR_TIMEOUT) - return 2; + return ATA_ECAT_TOUT_HSM; - if (is_io) { + if (eflags & ATA_EFLAG_IS_IO) { if (err_mask & AC_ERR_HSM) - return 2; + return ATA_ECAT_TOUT_HSM; if ((err_mask & (AC_ERR_DEV|AC_ERR_MEDIA|AC_ERR_INVALID)) == AC_ERR_DEV) - return 3; + return ATA_ECAT_UNK_DEV; } return 0; @@ -1472,13 +1483,13 @@ static int ata_eh_categorize_error(int is_io, unsigned int err_mask) struct speed_down_verdict_arg { u64 since; - int nr_errors[4]; + int nr_errors[ATA_ECAT_NR]; }; static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg) { struct speed_down_verdict_arg *arg = void_arg; - int cat = ata_eh_categorize_error(ent->is_io, ent->err_mask); + int cat = ata_eh_categorize_error(ent->eflags, ent->err_mask); if (ent->timestamp < arg->since) return -1; @@ -1495,22 +1506,33 @@ static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg) * whether NCQ needs to be turned off, transfer speed should be * stepped down, or falling back to PIO is necessary. * - * Cat-1 is ATA_BUS error for any command. + * ECAT_ATA_BUS : ATA_BUS error for any command + * + * ECAT_TOUT_HSM : TIMEOUT for any command or HSM violation for + * IO commands + * + * ECAT_UNK_DEV : Unknown DEV error for IO commands + * + * Verdicts are * - * Cat-2 is TIMEOUT for any command or HSM violation for known - * supported commands. + * NCQ_OFF : Turn off NCQ. * - * Cat-3 is is unclassified DEV error for known supported - * command. + * SPEED_DOWN : Speed down transfer speed but don't fall back + * to PIO. * - * NCQ needs to be turned off if there have been more than 3 - * Cat-2 + Cat-3 errors during last 10 minutes. + * FALLBACK_TO_PIO : Fall back to PIO. * - * Speed down is necessary if there have been more than 3 Cat-1 + - * Cat-2 errors or 10 Cat-3 errors during last 10 minutes. + * Even if multiple verdicts are returned, only one action is + * taken per error. ering is cleared after an action is taken. * - * Falling back to PIO mode is necessary if there have been more - * than 10 Cat-1 + Cat-2 + Cat-3 errors during last 5 minutes. + * 1. If more than 10 ATA_BUS, TOUT_HSM or UNK_DEV errors + * ocurred during last 5 mins, FALLBACK_TO_PIO + * + * 2. If more than 3 TOUT_HSM or UNK_DEV errors occurred + * during last 10 mins, NCQ_OFF. + * + * 3. If more than 3 ATA_BUS or TOUT_HSM errors, or more than 10 + * UNK_DEV errors occurred during last 10 mins, SPEED_DOWN. * * LOCKING: * Inherited from caller. @@ -1525,23 +1547,29 @@ static unsigned int ata_eh_speed_down_verdict(struct ata_device *dev) struct speed_down_verdict_arg arg; unsigned int verdict = 0; - /* scan past 10 mins of error history */ + /* scan past 5 mins of error history */ memset(&arg, 0, sizeof(arg)); - arg.since = j64 - min(j64, j10mins); + arg.since = j64 - min(j64, j5mins); ata_ering_map(&dev->ering, speed_down_verdict_cb, &arg); - if (arg.nr_errors[2] + arg.nr_errors[3] > 3) - verdict |= ATA_EH_SPDN_NCQ_OFF; - if (arg.nr_errors[1] + arg.nr_errors[2] > 3 || arg.nr_errors[3] > 10) - verdict |= ATA_EH_SPDN_SPEED_DOWN; + if (arg.nr_errors[ATA_ECAT_ATA_BUS] + + arg.nr_errors[ATA_ECAT_TOUT_HSM] + + arg.nr_errors[ATA_ECAT_UNK_DEV] > 10) + verdict |= ATA_EH_SPDN_FALLBACK_TO_PIO; - /* scan past 3 mins of error history */ + /* scan past 10 mins of error history */ memset(&arg, 0, sizeof(arg)); - arg.since = j64 - min(j64, j5mins); + arg.since = j64 - min(j64, j10mins); ata_ering_map(&dev->ering, speed_down_verdict_cb, &arg); - if (arg.nr_errors[1] + arg.nr_errors[2] + arg.nr_errors[3] > 10) - verdict |= ATA_EH_SPDN_FALLBACK_TO_PIO; + if (arg.nr_errors[ATA_ECAT_TOUT_HSM] + + arg.nr_errors[ATA_ECAT_UNK_DEV] > 3) + verdict |= ATA_EH_SPDN_NCQ_OFF; + + if (arg.nr_errors[ATA_ECAT_ATA_BUS] + + arg.nr_errors[ATA_ECAT_TOUT_HSM] > 3 || + arg.nr_errors[ATA_ECAT_UNK_DEV] > 10) + verdict |= ATA_EH_SPDN_SPEED_DOWN; return verdict; } @@ -1549,7 +1577,7 @@ static unsigned int ata_eh_speed_down_verdict(struct ata_device *dev) /** * ata_eh_speed_down - record error and speed down if necessary * @dev: Failed device - * @is_io: Did the device fail during normal IO? + * @eflags: mask of ATA_EFLAG_* flags * @err_mask: err_mask of the error * * Record error and examine error history to determine whether @@ -1563,18 +1591,19 @@ static unsigned int ata_eh_speed_down_verdict(struct ata_device *dev) * RETURNS: * Determined recovery action. */ -static unsigned int ata_eh_speed_down(struct ata_device *dev, int is_io, - unsigned int err_mask) +static unsigned int ata_eh_speed_down(struct ata_device *dev, + unsigned int eflags, unsigned int err_mask) { + struct ata_link *link = dev->link; unsigned int verdict; unsigned int action = 0; /* don't bother if Cat-0 error */ - if (ata_eh_categorize_error(is_io, err_mask) == 0) + if (ata_eh_categorize_error(eflags, err_mask) == 0) return 0; /* record error and determine whether speed down is necessary */ - ata_ering_record(&dev->ering, is_io, err_mask); + ata_ering_record(&dev->ering, eflags, err_mask); verdict = ata_eh_speed_down_verdict(dev); /* turn off NCQ? */ @@ -1590,7 +1619,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev, int is_io, /* speed down? */ if (verdict & ATA_EH_SPDN_SPEED_DOWN) { /* speed down SATA link speed if possible */ - if (sata_down_spd_limit(dev->link) == 0) { + if (sata_down_spd_limit(link) == 0) { action |= ATA_EH_HARDRESET; goto done; } @@ -1621,7 +1650,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev, int is_io, * SATA. Consider it only for PATA. */ if ((verdict & ATA_EH_SPDN_FALLBACK_TO_PIO) && (dev->spdn_cnt >= 2) && - (dev->link->ap->cbl != ATA_CBL_SATA) && + (link->ap->cbl != ATA_CBL_SATA) && (dev->xfer_shift != ATA_SHIFT_PIO)) { if (ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO) == 0) { dev->spdn_cnt = 0; @@ -1653,8 +1682,8 @@ static void ata_eh_link_autopsy(struct ata_link *link) struct ata_port *ap = link->ap; struct ata_eh_context *ehc = &link->eh_context; struct ata_device *dev; - unsigned int all_err_mask = 0; - int tag, is_io = 0; + unsigned int all_err_mask = 0, eflags = 0; + int tag; u32 serror; int rc; @@ -1713,15 +1742,15 @@ static void ata_eh_link_autopsy(struct ata_link *link) ehc->i.dev = qc->dev; all_err_mask |= qc->err_mask; if (qc->flags & ATA_QCFLAG_IO) - is_io = 1; + eflags |= ATA_EFLAG_IS_IO; } /* enforce default EH actions */ if (ap->pflags & ATA_PFLAG_FROZEN || all_err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT)) ehc->i.action |= ATA_EH_SOFTRESET; - else if ((is_io && all_err_mask) || - (!is_io && (all_err_mask & ~AC_ERR_DEV))) + else if (((eflags & ATA_EFLAG_IS_IO) && all_err_mask) || + (!(eflags & ATA_EFLAG_IS_IO) && (all_err_mask & ~AC_ERR_DEV))) ehc->i.action |= ATA_EH_REVALIDATE; /* If we have offending qcs and the associated failed device, @@ -1744,7 +1773,7 @@ static void ata_eh_link_autopsy(struct ata_link *link) dev = link->device; if (dev) - ehc->i.action |= ata_eh_speed_down(dev, is_io, all_err_mask); + ehc->i.action |= ata_eh_speed_down(dev, eflags, all_err_mask); DPRINTK("EXIT\n"); } diff --git a/include/linux/libata.h b/include/linux/libata.h index ca347b018649..74f1255e2524 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -482,7 +482,7 @@ struct ata_port_stats { }; struct ata_ering_entry { - int is_io; + unsigned int eflags; unsigned int err_mask; u64 timestamp; }; -- cgit v1.2.3-59-g8ed1b From 663f99b86ac7d4c0eed8c239638da0ea8849288b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 27 Nov 2007 19:28:57 +0900 Subject: libata: adjust speed down rules Speed down rules were too conservative. Adjust them a bit. * More than 10 timeouts can't happen in 5 minutes as command timeout is 30secs. Lower the limit for rule #1 to 6. * 10 timeouts is too high for rule #3 too. Lower it to 6. * SATAPI can benefit from falling back to PIO too. Allow SATAPI devices to fall back to PIO. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index b01ade102727..7d766ada7a5d 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1525,13 +1525,13 @@ static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg) * Even if multiple verdicts are returned, only one action is * taken per error. ering is cleared after an action is taken. * - * 1. If more than 10 ATA_BUS, TOUT_HSM or UNK_DEV errors + * 1. If more than 6 ATA_BUS, TOUT_HSM or UNK_DEV errors * ocurred during last 5 mins, FALLBACK_TO_PIO * * 2. If more than 3 TOUT_HSM or UNK_DEV errors occurred * during last 10 mins, NCQ_OFF. * - * 3. If more than 3 ATA_BUS or TOUT_HSM errors, or more than 10 + * 3. If more than 3 ATA_BUS or TOUT_HSM errors, or more than 6 * UNK_DEV errors occurred during last 10 mins, SPEED_DOWN. * * LOCKING: @@ -1554,7 +1554,7 @@ static unsigned int ata_eh_speed_down_verdict(struct ata_device *dev) if (arg.nr_errors[ATA_ECAT_ATA_BUS] + arg.nr_errors[ATA_ECAT_TOUT_HSM] + - arg.nr_errors[ATA_ECAT_UNK_DEV] > 10) + arg.nr_errors[ATA_ECAT_UNK_DEV] > 6) verdict |= ATA_EH_SPDN_FALLBACK_TO_PIO; /* scan past 10 mins of error history */ @@ -1568,7 +1568,7 @@ static unsigned int ata_eh_speed_down_verdict(struct ata_device *dev) if (arg.nr_errors[ATA_ECAT_ATA_BUS] + arg.nr_errors[ATA_ECAT_TOUT_HSM] > 3 || - arg.nr_errors[ATA_ECAT_UNK_DEV] > 10) + arg.nr_errors[ATA_ECAT_UNK_DEV] > 6) verdict |= ATA_EH_SPDN_SPEED_DOWN; return verdict; @@ -1647,10 +1647,10 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev, } /* Fall back to PIO? Slowing down to PIO is meaningless for - * SATA. Consider it only for PATA. + * SATA ATA devices. Consider it only for PATA and SATAPI. */ if ((verdict & ATA_EH_SPDN_FALLBACK_TO_PIO) && (dev->spdn_cnt >= 2) && - (link->ap->cbl != ATA_CBL_SATA) && + (link->ap->cbl != ATA_CBL_SATA || dev->class == ATA_DEV_ATAPI) && (dev->xfer_shift != ATA_SHIFT_PIO)) { if (ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO) == 0) { dev->spdn_cnt = 0; -- cgit v1.2.3-59-g8ed1b From 00115e0f5bc3bfdf3f3855ad89c8895f10458f92 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 27 Nov 2007 19:28:58 +0900 Subject: libata: implement ATA_DFLAG_DUBIOUS_XFER ATA_DFLAG_DUBIOUS_XFER is set whenever data transfer speed or method changes and gets cleared when data transfer command succeeds in the newly configured transfer mode. This will be used to improve speed down logic. Signed-off-by: Tejun Heo --- drivers/ata/libata-core.c | 19 +++++++++++++++++++ drivers/ata/libata-eh.c | 33 +++++++++++++++++++++++++++++++-- include/linux/libata.h | 3 +++ 3 files changed, 53 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 86c10cc751e9..124b6f111cc3 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5797,6 +5797,22 @@ static void fill_result_tf(struct ata_queued_cmd *qc) ap->ops->tf_read(ap, &qc->result_tf); } +static void ata_verify_xfer(struct ata_queued_cmd *qc) +{ + struct ata_device *dev = qc->dev; + + if (ata_tag_internal(qc->tag)) + return; + + if (ata_is_nodata(qc->tf.protocol)) + return; + + if ((dev->mwdma_mask || dev->udma_mask) && ata_is_pio(qc->tf.protocol)) + return; + + dev->flags &= ~ATA_DFLAG_DUBIOUS_XFER; +} + /** * ata_qc_complete - Complete an active ATA command * @qc: Command to complete @@ -5868,6 +5884,9 @@ void ata_qc_complete(struct ata_queued_cmd *qc) break; } + if (unlikely(dev->flags & ATA_DFLAG_DUBIOUS_XFER)) + ata_verify_xfer(qc); + __ata_qc_complete(qc); } else { if (qc->flags & ATA_QCFLAG_EH_SCHEDULED) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 7d766ada7a5d..359a5ace8473 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -456,9 +456,20 @@ void ata_scsi_error(struct Scsi_Host *host) spin_lock_irqsave(ap->lock, flags); __ata_port_for_each_link(link, ap) { + struct ata_eh_context *ehc = &link->eh_context; + struct ata_device *dev; + memset(&link->eh_context, 0, sizeof(link->eh_context)); link->eh_context.i = link->eh_info; memset(&link->eh_info, 0, sizeof(link->eh_info)); + + ata_link_for_each_dev(dev, link) { + int devno = dev->devno; + + ehc->saved_xfer_mode[devno] = dev->xfer_mode; + if (ata_ncq_enabled(dev)) + ehc->saved_ncq_enabled |= 1 << devno; + } } ap->pflags |= ATA_PFLAG_EH_IN_PROGRESS; @@ -2376,11 +2387,27 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link, int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) { struct ata_port *ap = link->ap; + struct ata_device *dev; + int rc; /* has private set_mode? */ if (ap->ops->set_mode) - return ap->ops->set_mode(link, r_failed_dev); - return ata_do_set_mode(link, r_failed_dev); + rc = ap->ops->set_mode(link, r_failed_dev); + else + rc = ata_do_set_mode(link, r_failed_dev); + + /* if transfer mode has changed, set DUBIOUS_XFER on device */ + ata_link_for_each_dev(dev, link) { + struct ata_eh_context *ehc = &link->eh_context; + u8 saved_xfer_mode = ehc->saved_xfer_mode[dev->devno]; + u8 saved_ncq = !!(ehc->saved_ncq_enabled & (1 << dev->devno)); + + if (dev->xfer_mode != saved_xfer_mode || + ata_ncq_enabled(dev) != saved_ncq) + dev->flags |= ATA_DFLAG_DUBIOUS_XFER; + } + + return rc; } static int ata_link_nr_enabled(struct ata_link *link) @@ -2441,6 +2468,8 @@ static int ata_eh_schedule_probe(struct ata_device *dev) ata_dev_init(dev); ehc->did_probe_mask |= (1 << dev->devno); ehc->i.action |= ATA_EH_SOFTRESET; + ehc->saved_xfer_mode[dev->devno] = 0; + ehc->saved_ncq_enabled &= ~(1 << dev->devno); return 1; } diff --git a/include/linux/libata.h b/include/linux/libata.h index 74f1255e2524..131fb6625e14 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -143,6 +143,7 @@ enum { ATA_DFLAG_NCQ_OFF = (1 << 13), /* device limited to non-NCQ mode */ ATA_DFLAG_SPUNDOWN = (1 << 14), /* XXX: for spindown_compat */ ATA_DFLAG_SLEEPING = (1 << 15), /* device is sleeping */ + ATA_DFLAG_DUBIOUS_XFER = (1 << 16), /* data transfer not verified */ ATA_DFLAG_INIT_MASK = (1 << 24) - 1, ATA_DFLAG_DETACH = (1 << 24), @@ -560,6 +561,8 @@ struct ata_eh_context { int tries[ATA_MAX_DEVICES]; unsigned int classes[ATA_MAX_DEVICES]; unsigned int did_probe_mask; + unsigned int saved_ncq_enabled; + u8 saved_xfer_mode[ATA_MAX_DEVICES]; }; struct ata_acpi_drive -- cgit v1.2.3-59-g8ed1b From 76326ac1ac1f524014ef36986fed97796b28ec6b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 27 Nov 2007 19:28:59 +0900 Subject: libata: implement fast speed down for unverified data transfer mode It's very likely that the configured data transfer mode is the wrong one if device fails data transfers right after initial data transfer mode configuration (including NCQ on/off and xfermode). libata EH needs to speed down fast before upper layers give up on probing. This patch implement fast speed down rules to handle such cases better. Error occured while data transfer hasn't been verified trigger fast back-to-back speed down actions until data transfer works. This change will make cable mis-detection and other initial configuration problems corrected before partition scanning code gives up. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 97 ++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 83 insertions(+), 14 deletions(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 359a5ace8473..3a2f7ef3e600 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -50,16 +50,23 @@ enum { ATA_EH_SPDN_NCQ_OFF = (1 << 0), ATA_EH_SPDN_SPEED_DOWN = (1 << 1), ATA_EH_SPDN_FALLBACK_TO_PIO = (1 << 2), + ATA_EH_SPDN_KEEP_ERRORS = (1 << 3), /* error flags */ ATA_EFLAG_IS_IO = (1 << 0), + ATA_EFLAG_DUBIOUS_XFER = (1 << 1), /* error categories */ ATA_ECAT_NONE = 0, ATA_ECAT_ATA_BUS = 1, ATA_ECAT_TOUT_HSM = 2, ATA_ECAT_UNK_DEV = 3, - ATA_ECAT_NR = 4, + ATA_ECAT_DUBIOUS_ATA_BUS = 4, + ATA_ECAT_DUBIOUS_TOUT_HSM = 5, + ATA_ECAT_DUBIOUS_UNK_DEV = 6, + ATA_ECAT_NR = 7, + + ATA_ECAT_DUBIOUS_BASE = ATA_ECAT_DUBIOUS_ATA_BUS, }; /* Waiting in ->prereset can never be reliable. It's sometimes nice @@ -245,6 +252,15 @@ static void ata_ering_record(struct ata_ering *ering, unsigned int eflags, ent->timestamp = get_jiffies_64(); } +static struct ata_ering_entry *ata_ering_top(struct ata_ering *ering) +{ + struct ata_ering_entry *ent = &ering->ring[ering->cursor]; + + if (ent->err_mask) + return ent; + return NULL; +} + static void ata_ering_clear(struct ata_ering *ering) { memset(ering, 0, sizeof(*ering)); @@ -1473,20 +1489,29 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc, return action; } -static int ata_eh_categorize_error(unsigned int eflags, unsigned int err_mask) +static int ata_eh_categorize_error(unsigned int eflags, unsigned int err_mask, + int *xfer_ok) { + int base = 0; + + if (!(eflags & ATA_EFLAG_DUBIOUS_XFER)) + *xfer_ok = 1; + + if (!*xfer_ok) + base = ATA_ECAT_DUBIOUS_BASE; + if (err_mask & AC_ERR_ATA_BUS) - return ATA_ECAT_ATA_BUS; + return base + ATA_ECAT_ATA_BUS; if (err_mask & AC_ERR_TIMEOUT) - return ATA_ECAT_TOUT_HSM; + return base + ATA_ECAT_TOUT_HSM; if (eflags & ATA_EFLAG_IS_IO) { if (err_mask & AC_ERR_HSM) - return ATA_ECAT_TOUT_HSM; + return base + ATA_ECAT_TOUT_HSM; if ((err_mask & (AC_ERR_DEV|AC_ERR_MEDIA|AC_ERR_INVALID)) == AC_ERR_DEV) - return ATA_ECAT_UNK_DEV; + return base + ATA_ECAT_UNK_DEV; } return 0; @@ -1494,18 +1519,22 @@ static int ata_eh_categorize_error(unsigned int eflags, unsigned int err_mask) struct speed_down_verdict_arg { u64 since; + int xfer_ok; int nr_errors[ATA_ECAT_NR]; }; static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg) { struct speed_down_verdict_arg *arg = void_arg; - int cat = ata_eh_categorize_error(ent->eflags, ent->err_mask); + int cat; if (ent->timestamp < arg->since) return -1; + cat = ata_eh_categorize_error(ent->eflags, ent->err_mask, + &arg->xfer_ok); arg->nr_errors[cat]++; + return 0; } @@ -1524,6 +1553,9 @@ static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg) * * ECAT_UNK_DEV : Unknown DEV error for IO commands * + * ECAT_DUBIOUS_* : Identical to above three but occurred while + * data transfer hasn't been verified. + * * Verdicts are * * NCQ_OFF : Turn off NCQ. @@ -1534,15 +1566,27 @@ static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg) * FALLBACK_TO_PIO : Fall back to PIO. * * Even if multiple verdicts are returned, only one action is - * taken per error. ering is cleared after an action is taken. + * taken per error. An action triggered by non-DUBIOUS errors + * clears ering, while one triggered by DUBIOUS_* errors doesn't. + * This is to expedite speed down decisions right after device is + * initially configured. + * + * The followings are speed down rules. #1 and #2 deal with + * DUBIOUS errors. * - * 1. If more than 6 ATA_BUS, TOUT_HSM or UNK_DEV errors + * 1. If more than one DUBIOUS_ATA_BUS or DUBIOUS_TOUT_HSM errors + * occurred during last 5 mins, SPEED_DOWN and FALLBACK_TO_PIO. + * + * 2. If more than one DUBIOUS_TOUT_HSM or DUBIOUS_UNK_DEV errors + * occurred during last 5 mins, NCQ_OFF. + * + * 3. If more than 8 ATA_BUS, TOUT_HSM or UNK_DEV errors * ocurred during last 5 mins, FALLBACK_TO_PIO * - * 2. If more than 3 TOUT_HSM or UNK_DEV errors occurred + * 4. If more than 3 TOUT_HSM or UNK_DEV errors occurred * during last 10 mins, NCQ_OFF. * - * 3. If more than 3 ATA_BUS or TOUT_HSM errors, or more than 6 + * 5. If more than 3 ATA_BUS or TOUT_HSM errors, or more than 6 * UNK_DEV errors occurred during last 10 mins, SPEED_DOWN. * * LOCKING: @@ -1563,6 +1607,15 @@ static unsigned int ata_eh_speed_down_verdict(struct ata_device *dev) arg.since = j64 - min(j64, j5mins); ata_ering_map(&dev->ering, speed_down_verdict_cb, &arg); + if (arg.nr_errors[ATA_ECAT_DUBIOUS_ATA_BUS] + + arg.nr_errors[ATA_ECAT_DUBIOUS_TOUT_HSM] > 1) + verdict |= ATA_EH_SPDN_SPEED_DOWN | + ATA_EH_SPDN_FALLBACK_TO_PIO | ATA_EH_SPDN_KEEP_ERRORS; + + if (arg.nr_errors[ATA_ECAT_DUBIOUS_TOUT_HSM] + + arg.nr_errors[ATA_ECAT_DUBIOUS_UNK_DEV] > 1) + verdict |= ATA_EH_SPDN_NCQ_OFF | ATA_EH_SPDN_KEEP_ERRORS; + if (arg.nr_errors[ATA_ECAT_ATA_BUS] + arg.nr_errors[ATA_ECAT_TOUT_HSM] + arg.nr_errors[ATA_ECAT_UNK_DEV] > 6) @@ -1606,11 +1659,12 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev, unsigned int eflags, unsigned int err_mask) { struct ata_link *link = dev->link; + int xfer_ok = 0; unsigned int verdict; unsigned int action = 0; /* don't bother if Cat-0 error */ - if (ata_eh_categorize_error(eflags, err_mask) == 0) + if (ata_eh_categorize_error(eflags, err_mask, &xfer_ok) == 0) return 0; /* record error and determine whether speed down is necessary */ @@ -1673,7 +1727,8 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev, return 0; done: /* device has been slowed down, blow error history */ - ata_ering_clear(&dev->ering); + if (!(verdict & ATA_EH_SPDN_KEEP_ERRORS)) + ata_ering_clear(&dev->ering); return action; } @@ -1783,8 +1838,11 @@ static void ata_eh_link_autopsy(struct ata_link *link) ata_dev_enabled(link->device)))) dev = link->device; - if (dev) + if (dev) { + if (dev->flags & ATA_DFLAG_DUBIOUS_XFER) + eflags |= ATA_EFLAG_DUBIOUS_XFER; ehc->i.action |= ata_eh_speed_down(dev, eflags, all_err_mask); + } DPRINTK("EXIT\n"); } @@ -2390,6 +2448,17 @@ int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) struct ata_device *dev; int rc; + /* if data transfer is verified, clear DUBIOUS_XFER on ering top */ + ata_link_for_each_dev(dev, link) { + if (!(dev->flags & ATA_DFLAG_DUBIOUS_XFER)) { + struct ata_ering_entry *ent; + + ent = ata_ering_top(&dev->ering); + if (ent) + ent->eflags &= ~ATA_EFLAG_DUBIOUS_XFER; + } + } + /* has private set_mode? */ if (ap->ops->set_mode) rc = ap->ops->set_mode(link, r_failed_dev); -- cgit v1.2.3-59-g8ed1b From e39eec13ff8c58520d77b5f977b1e0fa067fbd2c Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 1 Dec 2007 18:05:39 -0500 Subject: [libata] Build fix WRT ata_is_xxx() new API introduction Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 3a2f7ef3e600..d7d5a5ae04ef 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1987,7 +1987,7 @@ static void ata_eh_link_report(struct ata_link *link) dma_str[qc->dma_dir]); } - if (is_atapi_taskfile(&qc->tf)) + if (ata_is_atapi(qc->tf.protocol)) snprintf(cdb_buf, sizeof(cdb_buf), "cdb %02x %02x %02x %02x %02x %02x %02x %02x " "%02x %02x %02x %02x %02x %02x %02x %02x\n ", -- cgit v1.2.3-59-g8ed1b From f8ab6d8e15a9b978f79aee794c263014c2959dfc Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 27 Nov 2007 19:43:38 +0900 Subject: ata_generic: unindent loop in generic_set_mode() Unindent loop body in generic_set_mode(). This is to ease future change. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/ata_generic.c | 31 ++++++++++++++++--------------- 1 file changed, 16 insertions(+), 15 deletions(-) diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index 90329982bef7..fb5434c8ae6e 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -54,21 +54,22 @@ static int generic_set_mode(struct ata_link *link, struct ata_device **unused) dma_enabled = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); ata_link_for_each_dev(dev, link) { - if (ata_dev_enabled(dev)) { - /* We don't really care */ - dev->pio_mode = XFER_PIO_0; - dev->dma_mode = XFER_MW_DMA_0; - /* We do need the right mode information for DMA or PIO - and this comes from the current configuration flags */ - if (dma_enabled & (1 << (5 + dev->devno))) { - ata_id_to_dma_mode(dev, XFER_MW_DMA_0); - dev->flags &= ~ATA_DFLAG_PIO; - } else { - ata_dev_printk(dev, KERN_INFO, "configured for PIO\n"); - dev->xfer_mode = XFER_PIO_0; - dev->xfer_shift = ATA_SHIFT_PIO; - dev->flags |= ATA_DFLAG_PIO; - } + if (!ata_dev_enabled(dev)) + continue; + + /* We don't really care */ + dev->pio_mode = XFER_PIO_0; + dev->dma_mode = XFER_MW_DMA_0; + /* We do need the right mode information for DMA or PIO + and this comes from the current configuration flags */ + if (dma_enabled & (1 << (5 + dev->devno))) { + ata_id_to_dma_mode(dev, XFER_MW_DMA_0); + dev->flags &= ~ATA_DFLAG_PIO; + } else { + ata_dev_printk(dev, KERN_INFO, "configured for PIO\n"); + dev->xfer_mode = XFER_PIO_0; + dev->xfer_shift = ATA_SHIFT_PIO; + dev->flags |= ATA_DFLAG_PIO; } } return 0; -- cgit v1.2.3-59-g8ed1b From 6357357cae7794dcb89cace758108dec612e7ed5 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 27 Nov 2007 19:43:39 +0900 Subject: libata: export xfermode / PATA timing related functions Export the following xfermode related functions. * ata_pack_xfermask() * ata_unpack_xfermask() * ata_xfer_mask2mode() * ata_xfer_mode2mask() * ata_xfer_mode2shift() * ata_mode_string() * ata_id_xfermask() * ata_timing_find_mode() These functions will be used later by LLD updates. While at it, change unsigned short @speed to u8 @xfer_mode in ata_timing_find_mode() for consistency. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 33 +++++++++++++++++++-------------- include/linux/libata.h | 10 ++++++++++ 2 files changed, 29 insertions(+), 14 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 124b6f111cc3..a2f2ff864b37 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -454,9 +454,8 @@ int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, * RETURNS: * Packed xfer_mask. */ -static unsigned int ata_pack_xfermask(unsigned int pio_mask, - unsigned int mwdma_mask, - unsigned int udma_mask) +unsigned int ata_pack_xfermask(unsigned int pio_mask, + unsigned int mwdma_mask, unsigned int udma_mask) { return ((pio_mask << ATA_SHIFT_PIO) & ATA_MASK_PIO) | ((mwdma_mask << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA) | @@ -473,10 +472,8 @@ static unsigned int ata_pack_xfermask(unsigned int pio_mask, * Unpack @xfer_mask into @pio_mask, @mwdma_mask and @udma_mask. * Any NULL distination masks will be ignored. */ -static void ata_unpack_xfermask(unsigned int xfer_mask, - unsigned int *pio_mask, - unsigned int *mwdma_mask, - unsigned int *udma_mask) +void ata_unpack_xfermask(unsigned int xfer_mask, unsigned int *pio_mask, + unsigned int *mwdma_mask, unsigned int *udma_mask) { if (pio_mask) *pio_mask = (xfer_mask & ATA_MASK_PIO) >> ATA_SHIFT_PIO; @@ -509,7 +506,7 @@ static const struct ata_xfer_ent { * RETURNS: * Matching XFER_* value, 0 if no match found. */ -static u8 ata_xfer_mask2mode(unsigned int xfer_mask) +u8 ata_xfer_mask2mode(unsigned int xfer_mask) { int highbit = fls(xfer_mask) - 1; const struct ata_xfer_ent *ent; @@ -532,7 +529,7 @@ static u8 ata_xfer_mask2mode(unsigned int xfer_mask) * RETURNS: * Matching xfer_mask, 0 if no match found. */ -static unsigned int ata_xfer_mode2mask(u8 xfer_mode) +unsigned int ata_xfer_mode2mask(u8 xfer_mode) { const struct ata_xfer_ent *ent; @@ -554,7 +551,7 @@ static unsigned int ata_xfer_mode2mask(u8 xfer_mode) * RETURNS: * Matching xfer_shift, -1 if no match found. */ -static int ata_xfer_mode2shift(unsigned int xfer_mode) +int ata_xfer_mode2shift(unsigned int xfer_mode) { const struct ata_xfer_ent *ent; @@ -578,7 +575,7 @@ static int ata_xfer_mode2shift(unsigned int xfer_mode) * Constant C string representing highest speed listed in * @mode_mask, or the constant C string "". */ -static const char *ata_mode_string(unsigned int xfer_mask) +const char *ata_mode_string(unsigned int xfer_mask) { static const char * const xfer_mode_str[] = { "PIO0", @@ -1468,7 +1465,7 @@ static inline void ata_dump_id(const u16 *id) * RETURNS: * Computed xfermask */ -static unsigned int ata_id_xfermask(const u16 *id) +unsigned int ata_id_xfermask(const u16 *id) { unsigned int pio_mask, mwdma_mask, udma_mask; @@ -2855,11 +2852,11 @@ void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b, if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma); } -static const struct ata_timing *ata_timing_find_mode(unsigned short speed) +const struct ata_timing *ata_timing_find_mode(u8 xfer_mode) { const struct ata_timing *t; - for (t = ata_timing; t->mode != speed; t++) + for (t = ata_timing; t->mode != xfer_mode; t++) if (t->mode == 0xFF) return NULL; return t; @@ -7590,6 +7587,13 @@ EXPORT_SYMBOL_GPL(ata_std_dev_select); EXPORT_SYMBOL_GPL(sata_print_link_status); EXPORT_SYMBOL_GPL(ata_tf_to_fis); EXPORT_SYMBOL_GPL(ata_tf_from_fis); +EXPORT_SYMBOL_GPL(ata_pack_xfermask); +EXPORT_SYMBOL_GPL(ata_unpack_xfermask); +EXPORT_SYMBOL_GPL(ata_xfer_mask2mode); +EXPORT_SYMBOL_GPL(ata_xfer_mode2mask); +EXPORT_SYMBOL_GPL(ata_xfer_mode2shift); +EXPORT_SYMBOL_GPL(ata_mode_string); +EXPORT_SYMBOL_GPL(ata_id_xfermask); EXPORT_SYMBOL_GPL(ata_check_status); EXPORT_SYMBOL_GPL(ata_altstatus); EXPORT_SYMBOL_GPL(ata_exec_command); @@ -7655,6 +7659,7 @@ EXPORT_SYMBOL_GPL(ata_id_to_dma_mode); EXPORT_SYMBOL_GPL(ata_scsi_simulate); EXPORT_SYMBOL_GPL(ata_pio_need_iordy); +EXPORT_SYMBOL_GPL(ata_timing_find_mode); EXPORT_SYMBOL_GPL(ata_timing_compute); EXPORT_SYMBOL_GPL(ata_timing_merge); diff --git a/include/linux/libata.h b/include/linux/libata.h index 131fb6625e14..083dd77b120d 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -851,6 +851,15 @@ extern void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf); extern void ata_tf_to_fis(const struct ata_taskfile *tf, u8 pmp, int is_cmd, u8 *fis); extern void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf); +extern unsigned int ata_pack_xfermask(unsigned int pio_mask, + unsigned int mwdma_mask, unsigned int udma_mask); +extern void ata_unpack_xfermask(unsigned int xfer_mask, unsigned int *pio_mask, + unsigned int *mwdma_mask, unsigned int *udma_mask); +extern u8 ata_xfer_mask2mode(unsigned int xfer_mask); +extern unsigned int ata_xfer_mode2mask(u8 xfer_mode); +extern int ata_xfer_mode2shift(unsigned int xfer_mode); +extern const char *ata_mode_string(unsigned int xfer_mask); +extern unsigned int ata_id_xfermask(const u16 *id); extern void ata_noop_dev_select(struct ata_port *ap, unsigned int device); extern void ata_std_dev_select(struct ata_port *ap, unsigned int device); extern u8 ata_check_status(struct ata_port *ap); @@ -920,6 +929,7 @@ extern int ata_cable_unknown(struct ata_port *ap); */ extern unsigned int ata_pio_need_iordy(const struct ata_device *); +extern const struct ata_timing *ata_timing_find_mode(u8 xfer_mode); extern int ata_timing_compute(struct ata_device *, unsigned short, struct ata_timing *, int, int); extern void ata_timing_merge(const struct ata_timing *, -- cgit v1.2.3-59-g8ed1b From 70cd071e4ecc06c985189665af75c108601fd5a3 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 27 Nov 2007 19:43:40 +0900 Subject: libata: clean up xfermode / PATA timing related stuff * s/ATA_BITS_(PIO|MWDMA|UDMA)/ATA_NR_\1_MODES/g * Consistently use 0xff to indicate invalid transfer mode (0x00 is valid for PIO_SLOW). * Make ata_xfer_mode2mask() return proper mode mask instead of just the highest bit. * Sort ata_timing table in increasing xfermode order and update ata_timing_find_mode() accordingly. This patch doesn't introduce any behavior change. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 82 +++++++++++++++++++++++------------------------ include/linux/libata.h | 21 ++++++------ 2 files changed, 52 insertions(+), 51 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index a2f2ff864b37..a70ed7b3bc55 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -487,9 +487,9 @@ static const struct ata_xfer_ent { int shift, bits; u8 base; } ata_xfer_tbl[] = { - { ATA_SHIFT_PIO, ATA_BITS_PIO, XFER_PIO_0 }, - { ATA_SHIFT_MWDMA, ATA_BITS_MWDMA, XFER_MW_DMA_0 }, - { ATA_SHIFT_UDMA, ATA_BITS_UDMA, XFER_UDMA_0 }, + { ATA_SHIFT_PIO, ATA_NR_PIO_MODES, XFER_PIO_0 }, + { ATA_SHIFT_MWDMA, ATA_NR_MWDMA_MODES, XFER_MW_DMA_0 }, + { ATA_SHIFT_UDMA, ATA_NR_UDMA_MODES, XFER_UDMA_0 }, { -1, }, }; @@ -504,7 +504,7 @@ static const struct ata_xfer_ent { * None. * * RETURNS: - * Matching XFER_* value, 0 if no match found. + * Matching XFER_* value, 0xff if no match found. */ u8 ata_xfer_mask2mode(unsigned int xfer_mask) { @@ -514,7 +514,7 @@ u8 ata_xfer_mask2mode(unsigned int xfer_mask) for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) if (highbit >= ent->shift && highbit < ent->shift + ent->bits) return ent->base + highbit - ent->shift; - return 0; + return 0xff; } /** @@ -535,7 +535,8 @@ unsigned int ata_xfer_mode2mask(u8 xfer_mode) for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits) - return 1 << (ent->shift + xfer_mode - ent->base); + return ((2 << (ent->shift + xfer_mode - ent->base)) - 1) + & ~((1 << ent->shift) - 1); return 0; } @@ -1314,7 +1315,7 @@ void ata_id_to_dma_mode(struct ata_device *dev, u8 unknown) /* Select the mode in use */ mode = ata_xfer_mask2mode(mask); - if (mode != 0) { + if (mode != 0xff) { ata_dev_printk(dev, KERN_INFO, "configured for %s\n", ata_mode_string(mask)); } else { @@ -2788,38 +2789,33 @@ int sata_set_spd(struct ata_link *link) */ static const struct ata_timing ata_timing[] = { +/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */ + { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 }, + { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 }, + { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 }, + { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 }, + { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 }, + { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 100, 0 }, + { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 80, 0 }, - { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 }, - { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 }, - { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 }, - { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 }, + { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, + { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, + { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, - { XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 80, 0 }, + { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, + { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, + { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, { XFER_MW_DMA_3, 25, 0, 0, 0, 65, 25, 100, 0 }, - { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 }, - { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, - { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, + { XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 80, 0 }, /* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */ - - { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, - { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, - { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, - - { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, - { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, - { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, - - { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 80, 0 }, - { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 100, 0 }, - { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 }, - { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 }, - - { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 }, - { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 }, - { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 }, - -/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */ + { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, + { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, + { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 }, + { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 }, + { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 }, + { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 }, + { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 }, { 0xFF } }; @@ -2854,12 +2850,14 @@ void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b, const struct ata_timing *ata_timing_find_mode(u8 xfer_mode) { - const struct ata_timing *t; + const struct ata_timing *t = ata_timing; + + while (xfer_mode > t->mode) + t++; - for (t = ata_timing; t->mode != xfer_mode; t++) - if (t->mode == 0xFF) - return NULL; - return t; + if (xfer_mode == t->mode) + return t; + return NULL; } int ata_timing_compute(struct ata_device *adev, unsigned short speed, @@ -3122,7 +3120,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) dev->dma_mode = ata_xfer_mask2mode(dma_mask); found = 1; - if (dev->dma_mode) + if (dev->dma_mode != 0xff) used_dma = 1; } if (!found) @@ -3133,7 +3131,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) if (!ata_dev_enabled(dev)) continue; - if (!dev->pio_mode) { + if (dev->pio_mode == 0xff) { ata_dev_printk(dev, KERN_WARNING, "no PIO support\n"); rc = -EINVAL; goto out; @@ -3147,7 +3145,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) /* step 3: set host DMA timings */ ata_link_for_each_dev(dev, link) { - if (!ata_dev_enabled(dev) || !dev->dma_mode) + if (!ata_dev_enabled(dev) || dev->dma_mode == 0xff) continue; dev->xfer_mode = dev->dma_mode; diff --git a/include/linux/libata.h b/include/linux/libata.h index 083dd77b120d..e2ed3bac8c5b 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -269,17 +269,20 @@ enum { /* encoding various smaller bitmaps into a single * unsigned int bitmap */ - ATA_BITS_PIO = 7, - ATA_BITS_MWDMA = 5, - ATA_BITS_UDMA = 8, + ATA_NR_PIO_MODES = 7, + ATA_NR_MWDMA_MODES = 5, + ATA_NR_UDMA_MODES = 8, ATA_SHIFT_PIO = 0, - ATA_SHIFT_MWDMA = ATA_SHIFT_PIO + ATA_BITS_PIO, - ATA_SHIFT_UDMA = ATA_SHIFT_MWDMA + ATA_BITS_MWDMA, - - ATA_MASK_PIO = ((1 << ATA_BITS_PIO) - 1) << ATA_SHIFT_PIO, - ATA_MASK_MWDMA = ((1 << ATA_BITS_MWDMA) - 1) << ATA_SHIFT_MWDMA, - ATA_MASK_UDMA = ((1 << ATA_BITS_UDMA) - 1) << ATA_SHIFT_UDMA, + ATA_SHIFT_MWDMA = ATA_SHIFT_PIO + ATA_NR_PIO_MODES, + ATA_SHIFT_UDMA = ATA_SHIFT_MWDMA + ATA_NR_MWDMA_MODES, + + ATA_MASK_PIO = ((1 << ATA_NR_PIO_MODES) - 1) + << ATA_SHIFT_PIO, + ATA_MASK_MWDMA = ((1 << ATA_NR_MWDMA_MODES) - 1) + << ATA_SHIFT_MWDMA, + ATA_MASK_UDMA = ((1 << ATA_NR_UDMA_MODES) - 1) + << ATA_SHIFT_UDMA, /* size of buffer to pad xfers ending on unaligned boundaries */ ATA_DMA_PAD_SZ = 4, -- cgit v1.2.3-59-g8ed1b From 9d3501ab962b1506d93974faf8509251b4a85fbc Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 27 Nov 2007 19:43:41 +0900 Subject: libata: kill ata_id_to_dma_mode() ata_id_to_dma_mode() isn't quite generic. The function is basically privately implemented ata_id_xfermask() combined with hardcoded mode printing and configuration which are specific to ata_generic. Kill the function and open code it in generic_set_mode() using generic xfermode handling functions. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/ata_generic.c | 17 ++++++++++++++++- drivers/ata/libata-core.c | 43 ------------------------------------------- include/linux/libata.h | 1 - 3 files changed, 16 insertions(+), 45 deletions(-) diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index fb5434c8ae6e..d11a4f1fe86a 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -63,7 +63,22 @@ static int generic_set_mode(struct ata_link *link, struct ata_device **unused) /* We do need the right mode information for DMA or PIO and this comes from the current configuration flags */ if (dma_enabled & (1 << (5 + dev->devno))) { - ata_id_to_dma_mode(dev, XFER_MW_DMA_0); + unsigned int xfer_mask = ata_id_xfermask(dev->id); + const char *name; + + if (xfer_mask & (ATA_MASK_MWDMA | ATA_MASK_UDMA)) + name = ata_mode_string(xfer_mask); + else { + /* SWDMA perhaps? */ + name = "DMA"; + xfer_mask |= ata_xfer_mode2mask(XFER_MW_DMA_0); + } + + ata_dev_printk(dev, KERN_INFO, "configured for %s\n", + name); + + dev->xfer_mode = ata_xfer_mask2mode(xfer_mask); + dev->xfer_shift = ata_xfer_mode2shift(dev->xfer_mode); dev->flags &= ~ATA_DFLAG_PIO; } else { ata_dev_printk(dev, KERN_INFO, "configured for PIO\n"); diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index a70ed7b3bc55..ab84772235c9 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1287,48 +1287,6 @@ static int ata_hpa_resize(struct ata_device *dev) return 0; } -/** - * ata_id_to_dma_mode - Identify DMA mode from id block - * @dev: device to identify - * @unknown: mode to assume if we cannot tell - * - * Set up the timing values for the device based upon the identify - * reported values for the DMA mode. This function is used by drivers - * which rely upon firmware configured modes, but wish to report the - * mode correctly when possible. - * - * In addition we emit similarly formatted messages to the default - * ata_dev_set_mode handler, in order to provide consistency of - * presentation. - */ - -void ata_id_to_dma_mode(struct ata_device *dev, u8 unknown) -{ - unsigned int mask; - u8 mode; - - /* Pack the DMA modes */ - mask = ((dev->id[63] >> 8) << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA; - if (dev->id[53] & 0x04) - mask |= ((dev->id[88] >> 8) << ATA_SHIFT_UDMA) & ATA_MASK_UDMA; - - /* Select the mode in use */ - mode = ata_xfer_mask2mode(mask); - - if (mode != 0xff) { - ata_dev_printk(dev, KERN_INFO, "configured for %s\n", - ata_mode_string(mask)); - } else { - /* SWDMA perhaps ? */ - mode = unknown; - ata_dev_printk(dev, KERN_INFO, "configured for DMA\n"); - } - - /* Configure the device reporting */ - dev->xfer_mode = mode; - dev->xfer_shift = ata_xfer_mode2shift(mode); -} - /** * ata_noop_dev_select - Select device 0/1 on ATA bus * @ap: ATA channel to manipulate @@ -7653,7 +7611,6 @@ EXPORT_SYMBOL_GPL(ata_host_resume); #endif /* CONFIG_PM */ EXPORT_SYMBOL_GPL(ata_id_string); EXPORT_SYMBOL_GPL(ata_id_c_string); -EXPORT_SYMBOL_GPL(ata_id_to_dma_mode); EXPORT_SYMBOL_GPL(ata_scsi_simulate); EXPORT_SYMBOL_GPL(ata_pio_need_iordy); diff --git a/include/linux/libata.h b/include/linux/libata.h index e2ed3bac8c5b..d33702fe78f9 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -890,7 +890,6 @@ extern void ata_id_string(const u16 *id, unsigned char *s, unsigned int ofs, unsigned int len); extern void ata_id_c_string(const u16 *id, unsigned char *s, unsigned int ofs, unsigned int len); -extern void ata_id_to_dma_mode(struct ata_device *dev, u8 unknown); extern void ata_bmdma_setup(struct ata_queued_cmd *qc); extern void ata_bmdma_start(struct ata_queued_cmd *qc); extern void ata_bmdma_stop(struct ata_queued_cmd *qc); -- cgit v1.2.3-59-g8ed1b From 7dc951aefdc1dc20228691b04867fb6195864d67 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 27 Nov 2007 19:43:42 +0900 Subject: libata: xfer_mask is unsigned long not unsigned int Jeff says xfer_mask is unsigned long not unsigned int. Convert all xfermask fields and handling functions to deal with unsigned longs. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 29 +++++++++++++++-------------- include/linux/libata.h | 46 +++++++++++++++++++++++++--------------------- 2 files changed, 40 insertions(+), 35 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index ab84772235c9..711595390996 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -454,8 +454,9 @@ int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, * RETURNS: * Packed xfer_mask. */ -unsigned int ata_pack_xfermask(unsigned int pio_mask, - unsigned int mwdma_mask, unsigned int udma_mask) +unsigned long ata_pack_xfermask(unsigned long pio_mask, + unsigned long mwdma_mask, + unsigned long udma_mask) { return ((pio_mask << ATA_SHIFT_PIO) & ATA_MASK_PIO) | ((mwdma_mask << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA) | @@ -472,8 +473,8 @@ unsigned int ata_pack_xfermask(unsigned int pio_mask, * Unpack @xfer_mask into @pio_mask, @mwdma_mask and @udma_mask. * Any NULL distination masks will be ignored. */ -void ata_unpack_xfermask(unsigned int xfer_mask, unsigned int *pio_mask, - unsigned int *mwdma_mask, unsigned int *udma_mask) +void ata_unpack_xfermask(unsigned long xfer_mask, unsigned long *pio_mask, + unsigned long *mwdma_mask, unsigned long *udma_mask) { if (pio_mask) *pio_mask = (xfer_mask & ATA_MASK_PIO) >> ATA_SHIFT_PIO; @@ -506,7 +507,7 @@ static const struct ata_xfer_ent { * RETURNS: * Matching XFER_* value, 0xff if no match found. */ -u8 ata_xfer_mask2mode(unsigned int xfer_mask) +u8 ata_xfer_mask2mode(unsigned long xfer_mask) { int highbit = fls(xfer_mask) - 1; const struct ata_xfer_ent *ent; @@ -529,7 +530,7 @@ u8 ata_xfer_mask2mode(unsigned int xfer_mask) * RETURNS: * Matching xfer_mask, 0 if no match found. */ -unsigned int ata_xfer_mode2mask(u8 xfer_mode) +unsigned long ata_xfer_mode2mask(u8 xfer_mode) { const struct ata_xfer_ent *ent; @@ -552,7 +553,7 @@ unsigned int ata_xfer_mode2mask(u8 xfer_mode) * RETURNS: * Matching xfer_shift, -1 if no match found. */ -int ata_xfer_mode2shift(unsigned int xfer_mode) +int ata_xfer_mode2shift(unsigned long xfer_mode) { const struct ata_xfer_ent *ent; @@ -576,7 +577,7 @@ int ata_xfer_mode2shift(unsigned int xfer_mode) * Constant C string representing highest speed listed in * @mode_mask, or the constant C string "". */ -const char *ata_mode_string(unsigned int xfer_mask) +const char *ata_mode_string(unsigned long xfer_mask) { static const char * const xfer_mode_str[] = { "PIO0", @@ -1424,9 +1425,9 @@ static inline void ata_dump_id(const u16 *id) * RETURNS: * Computed xfermask */ -unsigned int ata_id_xfermask(const u16 *id) +unsigned long ata_id_xfermask(const u16 *id) { - unsigned int pio_mask, mwdma_mask, udma_mask; + unsigned long pio_mask, mwdma_mask, udma_mask; /* Usual case. Word 53 indicates word 64 is valid */ if (id[ATA_ID_FIELD_VALID] & (1 << 1)) { @@ -2050,7 +2051,7 @@ int ata_dev_configure(struct ata_device *dev) struct ata_eh_context *ehc = &dev->link->eh_context; int print_info = ehc->i.flags & ATA_EHI_PRINTINFO; const u16 *id = dev->id; - unsigned int xfer_mask; + unsigned long xfer_mask; char revbuf[7]; /* XYZ-99\0 */ char fwrevbuf[ATA_ID_FW_REV_LEN+1]; char modelbuf[ATA_ID_PROD_LEN+1]; @@ -2907,8 +2908,8 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel) { char buf[32]; - unsigned int orig_mask, xfer_mask; - unsigned int pio_mask, mwdma_mask, udma_mask; + unsigned long orig_mask, xfer_mask; + unsigned long pio_mask, mwdma_mask, udma_mask; int quiet, highbit; quiet = !!(sel & ATA_DNXFER_QUIET); @@ -3052,7 +3053,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) /* step 1: calculate xfer_mask */ ata_link_for_each_dev(dev, link) { - unsigned int pio_mask, dma_mask; + unsigned long pio_mask, dma_mask; unsigned int mode_mask; if (!ata_dev_enabled(dev)) diff --git a/include/linux/libata.h b/include/linux/libata.h index d33702fe78f9..d9eb20c67bb6 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -267,7 +267,7 @@ enum { PORT_DISABLED = 2, /* encoding various smaller bitmaps into a single - * unsigned int bitmap + * unsigned long bitmap */ ATA_NR_PIO_MODES = 7, ATA_NR_MWDMA_MODES = 5, @@ -277,13 +277,6 @@ enum { ATA_SHIFT_MWDMA = ATA_SHIFT_PIO + ATA_NR_PIO_MODES, ATA_SHIFT_UDMA = ATA_SHIFT_MWDMA + ATA_NR_MWDMA_MODES, - ATA_MASK_PIO = ((1 << ATA_NR_PIO_MODES) - 1) - << ATA_SHIFT_PIO, - ATA_MASK_MWDMA = ((1 << ATA_NR_MWDMA_MODES) - 1) - << ATA_SHIFT_MWDMA, - ATA_MASK_UDMA = ((1 << ATA_NR_UDMA_MODES) - 1) - << ATA_SHIFT_UDMA, - /* size of buffer to pad xfers ending on unaligned boundaries */ ATA_DMA_PAD_SZ = 4, ATA_DMA_PAD_BUF_SZ = ATA_DMA_PAD_SZ * ATA_MAX_QUEUE, @@ -355,6 +348,15 @@ enum { ATA_DMA_MASK_CFA = (1 << 2), /* DMA on CF Card */ }; +enum ata_xfer_mask { + ATA_MASK_PIO = ((1LU << ATA_NR_PIO_MODES) - 1) + << ATA_SHIFT_PIO, + ATA_MASK_MWDMA = ((1LU << ATA_NR_MWDMA_MODES) - 1) + << ATA_SHIFT_MWDMA, + ATA_MASK_UDMA = ((1LU << ATA_NR_UDMA_MODES) - 1) + << ATA_SHIFT_UDMA, +}; + enum hsm_task_states { HSM_ST_IDLE, /* no command on going */ HSM_ST_FIRST, /* (waiting the device to) @@ -526,9 +528,9 @@ struct ata_device { unsigned int cdb_len; /* per-dev xfer mask */ - unsigned int pio_mask; - unsigned int mwdma_mask; - unsigned int udma_mask; + unsigned long pio_mask; + unsigned long mwdma_mask; + unsigned long udma_mask; /* for CHS addressing */ u16 cylinders; /* Number of cylinders */ @@ -854,15 +856,16 @@ extern void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf); extern void ata_tf_to_fis(const struct ata_taskfile *tf, u8 pmp, int is_cmd, u8 *fis); extern void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf); -extern unsigned int ata_pack_xfermask(unsigned int pio_mask, - unsigned int mwdma_mask, unsigned int udma_mask); -extern void ata_unpack_xfermask(unsigned int xfer_mask, unsigned int *pio_mask, - unsigned int *mwdma_mask, unsigned int *udma_mask); -extern u8 ata_xfer_mask2mode(unsigned int xfer_mask); -extern unsigned int ata_xfer_mode2mask(u8 xfer_mode); -extern int ata_xfer_mode2shift(unsigned int xfer_mode); -extern const char *ata_mode_string(unsigned int xfer_mask); -extern unsigned int ata_id_xfermask(const u16 *id); +extern unsigned long ata_pack_xfermask(unsigned long pio_mask, + unsigned long mwdma_mask, unsigned long udma_mask); +extern void ata_unpack_xfermask(unsigned long xfer_mask, + unsigned long *pio_mask, unsigned long *mwdma_mask, + unsigned long *udma_mask); +extern u8 ata_xfer_mask2mode(unsigned long xfer_mask); +extern unsigned long ata_xfer_mode2mask(u8 xfer_mode); +extern int ata_xfer_mode2shift(unsigned long xfer_mode); +extern const char *ata_mode_string(unsigned long xfer_mask); +extern unsigned long ata_id_xfermask(const u16 *id); extern void ata_noop_dev_select(struct ata_port *ap, unsigned int device); extern void ata_std_dev_select(struct ata_port *ap, unsigned int device); extern u8 ata_check_status(struct ata_port *ap); @@ -1001,7 +1004,8 @@ extern int ata_pci_prepare_sff_host(struct pci_dev *pdev, const struct ata_port_info * const * ppi, struct ata_host **r_host); extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits); -extern unsigned long ata_pci_default_filter(struct ata_device *, unsigned long); +extern unsigned long ata_pci_default_filter(struct ata_device *dev, + unsigned long xfer_mask); #endif /* CONFIG_PCI */ /* -- cgit v1.2.3-59-g8ed1b From c88f90c3779cd5e710f2acdf59ad2bd0380de98d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 27 Nov 2007 19:43:48 +0900 Subject: libata: add ATA_CBL_PATA_IGN ATA_CBL_PATA_UNK indicates that the cable type can't be determined from the host side and might be either 80c or 40c. libata applies drive or other generic limit in this case. However, there are controllers where both host and drive side detections are misimplemented and the driver has to rely solely on private method - peeking BIOS or ACPI configuration or using some other private mechanism. This patch adds ATA_CBL_PATA_IGN which tells libata to ignore the cable type completely and just let the LLD determine the transfer mode via host transfer mode masks and ->mode_filter(). Signed-off-by: Tejun Heo Cc: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 13 +++++++++++++ include/linux/ata.h | 7 ++++--- include/linux/libata.h | 1 + 3 files changed, 18 insertions(+), 3 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 711595390996..62c4b328b0b6 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2353,6 +2353,18 @@ int ata_cable_unknown(struct ata_port *ap) return ATA_CBL_PATA_UNK; } +/** + * ata_cable_ignore - return ignored PATA cable. + * @ap: port + * + * Helper method for drivers which don't use cable type to limit + * transfer mode. + */ +int ata_cable_ignore(struct ata_port *ap) +{ + return ATA_CBL_PATA_IGN; +} + /** * ata_cable_sata - return SATA cable type * @ap: port @@ -7665,4 +7677,5 @@ EXPORT_SYMBOL_GPL(ata_dev_try_classify); EXPORT_SYMBOL_GPL(ata_cable_40wire); EXPORT_SYMBOL_GPL(ata_cable_80wire); EXPORT_SYMBOL_GPL(ata_cable_unknown); +EXPORT_SYMBOL_GPL(ata_cable_ignore); EXPORT_SYMBOL_GPL(ata_cable_sata); diff --git a/include/linux/ata.h b/include/linux/ata.h index 43fecf62773a..c17e9404c88d 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -286,9 +286,10 @@ enum { ATA_CBL_NONE = 0, ATA_CBL_PATA40 = 1, ATA_CBL_PATA80 = 2, - ATA_CBL_PATA40_SHORT = 3, /* 40 wire cable to high UDMA spec */ - ATA_CBL_PATA_UNK = 4, - ATA_CBL_SATA = 5, + ATA_CBL_PATA40_SHORT = 3, /* 40 wire cable to high UDMA spec */ + ATA_CBL_PATA_UNK = 4, /* don't know, maybe 80c? */ + ATA_CBL_PATA_IGN = 5, /* don't know, ignore cable handling */ + ATA_CBL_SATA = 6, /* SATA Status and Control Registers */ SCR_STATUS = 0, diff --git a/include/linux/libata.h b/include/linux/libata.h index d9eb20c67bb6..bdb7c6e13993 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -927,6 +927,7 @@ extern u8 ata_irq_on(struct ata_port *ap); extern int ata_cable_40wire(struct ata_port *ap); extern int ata_cable_80wire(struct ata_port *ap); extern int ata_cable_sata(struct ata_port *ap); +extern int ata_cable_ignore(struct ata_port *ap); extern int ata_cable_unknown(struct ata_port *ap); /* -- cgit v1.2.3-59-g8ed1b From 46a671430dfa4ca59c7a69f01326e99edddb21bd Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 4 Dec 2007 13:33:30 +0900 Subject: sata_promise: make pdc_atapi_pkt() use values from qc->tf Make pdc_atapi_pkt() use values from qc->tf instead of creating its own. This is to ease future ATAPI handling changes. Signed-off-by: Tejun Heo Cc: Mikael Pettersson Signed-off-by: Jeff Garzik --- drivers/ata/sata_promise.c | 34 +++++++++++++--------------------- 1 file changed, 13 insertions(+), 21 deletions(-) diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index 7914def54fa3..9638faaa8111 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -450,7 +450,7 @@ static void pdc_atapi_pkt(struct ata_queued_cmd *qc) struct pdc_port_priv *pp = ap->private_data; u8 *buf = pp->pkt; u32 *buf32 = (u32 *) buf; - unsigned int dev_sel, feature, nbytes; + unsigned int dev_sel, feature; /* set control bits (byte 0), zero delay seq id (byte 3), * and seq id (byte 2) @@ -473,45 +473,37 @@ static void pdc_atapi_pkt(struct ata_queued_cmd *qc) buf32[2] = 0; /* no next-packet */ /* select drive */ - if (sata_scr_valid(&ap->link)) { + if (sata_scr_valid(&ap->link)) dev_sel = PDC_DEVICE_SATA; - } else { - dev_sel = ATA_DEVICE_OBS; - if (qc->dev->devno != 0) - dev_sel |= ATA_DEV1; - } + else + dev_sel = qc->tf.device; + buf[12] = (1 << 5) | ATA_REG_DEVICE; buf[13] = dev_sel; buf[14] = (1 << 5) | ATA_REG_DEVICE | PDC_PKT_CLEAR_BSY; buf[15] = dev_sel; /* once more, waiting for BSY to clear */ buf[16] = (1 << 5) | ATA_REG_NSECT; - buf[17] = 0x00; + buf[17] = qc->tf.nsect; buf[18] = (1 << 5) | ATA_REG_LBAL; - buf[19] = 0x00; + buf[19] = qc->tf.lbal; /* set feature and byte counter registers */ - if (qc->tf.protocol != ATA_PROT_ATAPI_DMA) { + if (qc->tf.protocol != ATA_PROT_ATAPI_DMA) feature = PDC_FEATURE_ATAPI_PIO; - /* set byte counter register to real transfer byte count */ - nbytes = qc->nbytes; - if (nbytes > 0xffff) - nbytes = 0xffff; - } else { + else feature = PDC_FEATURE_ATAPI_DMA; - /* set byte counter register to 0 */ - nbytes = 0; - } + buf[20] = (1 << 5) | ATA_REG_FEATURE; buf[21] = feature; buf[22] = (1 << 5) | ATA_REG_BYTEL; - buf[23] = nbytes & 0xFF; + buf[23] = qc->tf.lbam; buf[24] = (1 << 5) | ATA_REG_BYTEH; - buf[25] = (nbytes >> 8) & 0xFF; + buf[25] = qc->tf.lbah; /* send ATAPI packet command 0xA0 */ buf[26] = (1 << 5) | ATA_REG_CMD; - buf[27] = ATA_CMD_PACKET; + buf[27] = qc->tf.command; /* select drive and check DRQ */ buf[28] = (1 << 5) | ATA_REG_DEVICE | PDC_PKT_WAIT_DRDY; -- cgit v1.2.3-59-g8ed1b From 9cde9ed151e170f2e2a530f7ec0032dfbe9f443b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 24 Nov 2007 21:16:07 +0900 Subject: ata_piix: separate controller IDs into separate enum Separate controller IDs into a separate enum as Jeff requested. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 34 ++++++++++++++++++---------------- 1 file changed, 18 insertions(+), 16 deletions(-) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 0d8bd19a5345..2db635817edf 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -118,22 +118,6 @@ enum { PIIX_80C_PRI = (1 << 5) | (1 << 4), PIIX_80C_SEC = (1 << 7) | (1 << 6), - /* controller IDs */ - piix_pata_mwdma = 0, /* PIIX3 MWDMA only */ - piix_pata_33, /* PIIX4 at 33Mhz */ - ich_pata_33, /* ICH up to UDMA 33 only */ - ich_pata_66, /* ICH up to 66 Mhz */ - ich_pata_100, /* ICH up to UDMA 100 */ - ich5_sata, - ich6_sata, - ich6_sata_ahci, - ich6m_sata_ahci, - ich8_sata_ahci, - ich8_2port_sata, - ich8m_apple_sata_ahci, /* locks up on second port enable */ - tolapai_sata_ahci, - piix_pata_vmw, /* PIIX4 for VMware, spurious DMA_ERR */ - /* constants for mapping table */ P0 = 0, /* port 0 */ P1 = 1, /* port 1 */ @@ -149,6 +133,24 @@ enum { PIIX_HOST_BROKEN_SUSPEND = (1 << 24), }; +enum piix_controller_ids { + /* controller IDs */ + piix_pata_mwdma, /* PIIX3 MWDMA only */ + piix_pata_33, /* PIIX4 at 33Mhz */ + ich_pata_33, /* ICH up to UDMA 33 only */ + ich_pata_66, /* ICH up to 66 Mhz */ + ich_pata_100, /* ICH up to UDMA 100 */ + ich5_sata, + ich6_sata, + ich6_sata_ahci, + ich6m_sata_ahci, + ich8_sata_ahci, + ich8_2port_sata, + ich8m_apple_sata_ahci, /* locks up on second port enable */ + tolapai_sata_ahci, + piix_pata_vmw, /* PIIX4 for VMware, spurious DMA_ERR */ +}; + struct piix_map_db { const u32 mask; const u16 port_enable; -- cgit v1.2.3-59-g8ed1b From 7c77fa4d51b1480bcec2e898c94d6912fe063c16 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 18 Dec 2007 16:33:03 +0900 Subject: libata: separate out ata_acpi_gtm_xfermask() from pacpi_discover_modes() Finding out matching transfer mode from ACPI GTM values is useful for other purposes too. Separate out the function and timing tables from pata_acpi::pacpi_discover_modes(). Other than checking shared-configuration bit after doing ata_acpi_gtm() in pacpi_discover_modes() which should be safe, this patch doesn't introduce any behavior change. Signed-off-by: Tejun Heo Cc: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/libata-acpi.c | 78 +++++++++++++++++++++++++++++++++++++++++++++++ drivers/ata/pata_acpi.c | 66 +++++++-------------------------------- include/linux/libata.h | 25 +++++++++++++++ 3 files changed, 114 insertions(+), 55 deletions(-) diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index ebc4dfcf2f19..d6697baf243d 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -441,6 +441,84 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf) return rc; } +/* Welcome to ACPI, bring a bucket */ +const unsigned int ata_acpi_pio_cycle[7] = { + 600, 383, 240, 180, 120, 100, 80 +}; +EXPORT_SYMBOL_GPL(ata_acpi_pio_cycle); + +const unsigned int ata_acpi_mwdma_cycle[5] = { + 480, 150, 120, 100, 80 +}; +EXPORT_SYMBOL_GPL(ata_acpi_mwdma_cycle); + +const unsigned int ata_acpi_udma_cycle[7] = { + 120, 80, 60, 45, 30, 20, 15 +}; +EXPORT_SYMBOL_GPL(ata_acpi_udma_cycle); + +/** + * ata_acpi_gtm_xfermode - determine xfermode from GTM parameter + * @dev: target device + * @gtm: GTM parameter to use + * + * Determine xfermask for @dev from @gtm. + * + * LOCKING: + * None. + * + * RETURNS: + * Determined xfermask. + */ +unsigned long ata_acpi_gtm_xfermask(struct ata_device *dev, + const struct ata_acpi_gtm *gtm) +{ + int unit, i; + u32 t; + unsigned long mask = (0x7f << ATA_SHIFT_UDMA) | (0x7 << ATA_SHIFT_MWDMA) | (0x1F << ATA_SHIFT_PIO); + + /* we always use the 0 slot for crap hardware */ + unit = dev->devno; + if (!(gtm->flags & 0x10)) + unit = 0; + + /* start by scanning for PIO modes */ + for (i = 0; i < 7; i++) { + t = gtm->drive[unit].pio; + if (t <= ata_acpi_pio_cycle[i]) { + mask |= (2 << (ATA_SHIFT_PIO + i)) - 1; + break; + } + } + + /* See if we have MWDMA or UDMA data. We don't bother with + * MWDMA if UDMA is available as this means the BIOS set UDMA + * and our error changedown if it works is UDMA to PIO anyway. + */ + if (gtm->flags & (1 << (2 * unit))) { + /* MWDMA */ + for (i = 0; i < 5; i++) { + t = gtm->drive[unit].dma; + if (t <= ata_acpi_mwdma_cycle[i]) { + mask |= (2 << (ATA_SHIFT_MWDMA + i)) - 1; + break; + } + } + } else { + /* UDMA */ + for (i = 0; i < 7; i++) { + t = gtm->drive[unit].dma; + if (t <= ata_acpi_udma_cycle[i]) { + mask |= (2 << (ATA_SHIFT_UDMA + i)) - 1; + break; + } + } + } + + return mask; +} +EXPORT_SYMBOL_GPL(ata_acpi_gtm_xfermask); + /** * ata_acpi_cbl_80wire - Check for 80 wire cable * @ap: Port to check diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c index e4542ab9c7f8..a4737a3d31cb 100644 --- a/drivers/ata/pata_acpi.c +++ b/drivers/ata/pata_acpi.c @@ -81,17 +81,6 @@ static void pacpi_error_handler(struct ata_port *ap) NULL, ata_std_postreset); } -/* Welcome to ACPI, bring a bucket */ -static const unsigned int pio_cycle[7] = { - 600, 383, 240, 180, 120, 100, 80 -}; -static const unsigned int mwdma_cycle[5] = { - 480, 150, 120, 100, 80 -}; -static const unsigned int udma_cycle[7] = { - 120, 80, 60, 45, 30, 20, 15 -}; - /** * pacpi_discover_modes - filter non ACPI modes * @adev: ATA device @@ -103,56 +92,20 @@ static const unsigned int udma_cycle[7] = { static unsigned long pacpi_discover_modes(struct ata_port *ap, struct ata_device *adev) { - int unit = adev->devno; struct pata_acpi *acpi = ap->private_data; - int i; - u32 t; - unsigned long mask = (0x7f << ATA_SHIFT_UDMA) | (0x7 << ATA_SHIFT_MWDMA) | (0x1F << ATA_SHIFT_PIO); - struct ata_acpi_gtm probe; + unsigned int xfer_mask; probe = acpi->gtm; - /* We always use the 0 slot for crap hardware */ - if (!(probe.flags & 0x10)) - unit = 0; - ata_acpi_gtm(ap, &probe); - /* Start by scanning for PIO modes */ - for (i = 0; i < 7; i++) { - t = probe.drive[unit].pio; - if (t <= pio_cycle[i]) { - mask |= (2 << (ATA_SHIFT_PIO + i)) - 1; - break; - } - } + xfer_mask = ata_acpi_gtm_xfermask(adev, &probe); - /* See if we have MWDMA or UDMA data. We don't bother with MWDMA - if UDMA is availabe as this means the BIOS set UDMA and our - error changedown if it works is UDMA to PIO anyway */ - if (probe.flags & (1 << (2 * unit))) { - /* MWDMA */ - for (i = 0; i < 5; i++) { - t = probe.drive[unit].dma; - if (t <= mwdma_cycle[i]) { - mask |= (2 << (ATA_SHIFT_MWDMA + i)) - 1; - break; - } - } - } else { - /* UDMA */ - for (i = 0; i < 7; i++) { - t = probe.drive[unit].dma; - if (t <= udma_cycle[i]) { - mask |= (2 << (ATA_SHIFT_UDMA + i)) - 1; - break; - } - } - } - if (mask & (0xF8 << ATA_SHIFT_UDMA)) + if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA)) ap->cbl = ATA_CBL_PATA80; - return mask; + + return xfer_mask; } /** @@ -185,7 +138,8 @@ static void pacpi_set_piomode(struct ata_port *ap, struct ata_device *adev) unit = 0; /* Now stuff the nS values into the structure */ - acpi->gtm.drive[unit].pio = pio_cycle[adev->pio_mode - XFER_PIO_0]; + acpi->gtm.drive[unit].pio = + ata_acpi_pio_cycle[adev->pio_mode - XFER_PIO_0]; ata_acpi_stm(ap, &acpi->gtm); /* See what mode we actually got */ ata_acpi_gtm(ap, &acpi->gtm); @@ -207,10 +161,12 @@ static void pacpi_set_dmamode(struct ata_port *ap, struct ata_device *adev) /* Now stuff the nS values into the structure */ if (adev->dma_mode >= XFER_UDMA_0) { - acpi->gtm.drive[unit].dma = udma_cycle[adev->dma_mode - XFER_UDMA_0]; + acpi->gtm.drive[unit].dma = + ata_acpi_udma_cycle[adev->dma_mode - XFER_UDMA_0]; acpi->gtm.flags |= (1 << (2 * unit)); } else { - acpi->gtm.drive[unit].dma = mwdma_cycle[adev->dma_mode - XFER_MW_DMA_0]; + acpi->gtm.drive[unit].dma = + ata_acpi_mwdma_cycle[adev->dma_mode - XFER_MW_DMA_0]; acpi->gtm.flags &= ~(1 << (2 * unit)); } ata_acpi_stm(ap, &acpi->gtm); diff --git a/include/linux/libata.h b/include/linux/libata.h index bdb7c6e13993..8022e5b2224d 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -961,6 +961,10 @@ enum { /* libata-acpi.c */ #ifdef CONFIG_ATA_ACPI +extern const unsigned int ata_acpi_pio_cycle[7]; +extern const unsigned int ata_acpi_mwdma_cycle[5]; +extern const unsigned int ata_acpi_udma_cycle[7]; + static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap) { if (ap->pflags & ATA_PFLAG_INIT_GTM_VALID) @@ -970,12 +974,33 @@ static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap) extern int ata_acpi_cbl_80wire(struct ata_port *ap); int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm); int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *stm); +unsigned long ata_acpi_gtm_xfermask(struct ata_device *dev, + const struct ata_acpi_gtm *gtm); + #else static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap) { return NULL; } static inline int ata_acpi_cbl_80wire(struct ata_port *ap) { return 0; } + +static inline int ata_acpi_stm(const struct ata_port *ap, + struct ata_acpi_gtm *stm) +{ + return -ENOSYS; +} + +static inline int ata_acpi_gtm(const struct ata_port *ap, + struct ata_acpi_gtm *stm) +{ + return -ENOSYS; +} + +static inline unsigned int ata_acpi_gtm_xfermask(struct ata_device *dev, + const struct ata_acpi_gtm *gtm) +{ + return 0; +} #endif #ifdef CONFIG_PCI -- cgit v1.2.3-59-g8ed1b From 5df91a25df08d85700fef5fd59bb1873273e5ef5 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 18 Dec 2007 16:33:04 +0900 Subject: libata: fix ata_acpi_gtm_xfermask() ata_acpi_gtm_xfermask() as separated out from pacpi_discover_modes() has various bugs. Fix them. * The wrong comparison operator is used when finding for matching cycle resulting totally bogus result. * With the comparion operator fixed, boundary condtion handling is clumsy. * Setting of any DMA mask bit set all bits in PIO mask. * MWDMA and UDMA blocks are swapped. Signed-off-by: Tejun Heo Cc: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/libata-acpi.c | 42 +++++++++++++++++++++--------------------- 1 file changed, 21 insertions(+), 21 deletions(-) diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index d6697baf243d..9f0b208afcf5 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -473,49 +473,49 @@ EXPORT_SYMBOL_GPL(ata_acpi_udma_cycle); unsigned long ata_acpi_gtm_xfermask(struct ata_device *dev, const struct ata_acpi_gtm *gtm) { + unsigned long pio_mask = 0, mwdma_mask = 0, udma_mask = 0; int unit, i; u32 t; - unsigned long mask = (0x7f << ATA_SHIFT_UDMA) | (0x7 << ATA_SHIFT_MWDMA) | (0x1F << ATA_SHIFT_PIO); /* we always use the 0 slot for crap hardware */ unit = dev->devno; if (!(gtm->flags & 0x10)) unit = 0; + /* Values larger than the longest cycle results in 0 mask + * while values equal to smaller than the shortest cycle + * results in mask which includes all supported modes. + * Disabled transfer method has the value of 0xffffffff which + * will always result in 0 mask. + */ + /* start by scanning for PIO modes */ - for (i = 0; i < 7; i++) { - t = gtm->drive[unit].pio; - if (t <= ata_acpi_pio_cycle[i]) { - mask |= (2 << (ATA_SHIFT_PIO + i)) - 1; + t = gtm->drive[unit].pio; + for (i = 0; i < ARRAY_SIZE(ata_acpi_pio_cycle); i++) + if (t > ata_acpi_pio_cycle[i]) break; - } - } + pio_mask = (1 << i) - 1; /* See if we have MWDMA or UDMA data. We don't bother with * MWDMA if UDMA is available as this means the BIOS set UDMA * and our error changedown if it works is UDMA to PIO anyway. */ - if (gtm->flags & (1 << (2 * unit))) { + t = gtm->drive[unit].dma; + if (!(gtm->flags & (1 << (2 * unit)))) { /* MWDMA */ - for (i = 0; i < 5; i++) { - t = gtm->drive[unit].dma; - if (t <= ata_acpi_mwdma_cycle[i]) { - mask |= (2 << (ATA_SHIFT_MWDMA + i)) - 1; + for (i = 0; i < ARRAY_SIZE(ata_acpi_mwdma_cycle); i++) + if (t > ata_acpi_mwdma_cycle[i]) break; - } - } + mwdma_mask = (1 << i) - 1; } else { /* UDMA */ - for (i = 0; i < 7; i++) { - t = gtm->drive[unit].dma; - if (t <= ata_acpi_udma_cycle[i]) { - mask |= (2 << (ATA_SHIFT_UDMA + i)) - 1; + for (i = 0; i < ARRAY_SIZE(ata_acpi_udma_cycle); i++) + if (t > ata_acpi_udma_cycle[i]) break; - } - } + udma_mask = (1 << i) - 1; } - return mask; + return ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask); } EXPORT_SYMBOL_GPL(ata_acpi_gtm_xfermask); -- cgit v1.2.3-59-g8ed1b From a0f79b929acaba10d4780acd2543eff20bf4b5b0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 18 Dec 2007 16:33:05 +0900 Subject: libata: implement ata_timing_cycle2mode() and use it in libata-acpi and pata_acpi libata-acpi is using separate timing tables for transfer modes although libata-core has the complete ata_timing table. Implement ata_timing_cycle2mode() to look for matching mode given transfer type and cycle duration and use it in libata-acpi and pata_acpi to replace private timing tables. Signed-off-by: Tejun Heo Cc: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/libata-acpi.c | 62 ++++++++++++----------------------------------- drivers/ata/libata-core.c | 52 +++++++++++++++++++++++++++++++++++++++ drivers/ata/pata_acpi.c | 13 +++++----- include/linux/libata.h | 5 +--- 4 files changed, 75 insertions(+), 57 deletions(-) diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index 9f0b208afcf5..a6f1a6b56d8c 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -441,22 +441,6 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf) return rc; } -/* Welcome to ACPI, bring a bucket */ -const unsigned int ata_acpi_pio_cycle[7] = { - 600, 383, 240, 180, 120, 100, 80 -}; -EXPORT_SYMBOL_GPL(ata_acpi_pio_cycle); - -const unsigned int ata_acpi_mwdma_cycle[5] = { - 480, 150, 120, 100, 80 -}; -EXPORT_SYMBOL_GPL(ata_acpi_mwdma_cycle); - -const unsigned int ata_acpi_udma_cycle[7] = { - 120, 80, 60, 45, 30, 20, 15 -}; -EXPORT_SYMBOL_GPL(ata_acpi_udma_cycle); - /** * ata_acpi_gtm_xfermode - determine xfermode from GTM parameter * @dev: target device @@ -473,49 +457,33 @@ EXPORT_SYMBOL_GPL(ata_acpi_udma_cycle); unsigned long ata_acpi_gtm_xfermask(struct ata_device *dev, const struct ata_acpi_gtm *gtm) { - unsigned long pio_mask = 0, mwdma_mask = 0, udma_mask = 0; - int unit, i; - u32 t; + unsigned long xfer_mask = 0; + unsigned int type; + int unit; + u8 mode; /* we always use the 0 slot for crap hardware */ unit = dev->devno; if (!(gtm->flags & 0x10)) unit = 0; - /* Values larger than the longest cycle results in 0 mask - * while values equal to smaller than the shortest cycle - * results in mask which includes all supported modes. - * Disabled transfer method has the value of 0xffffffff which - * will always result in 0 mask. - */ - - /* start by scanning for PIO modes */ - t = gtm->drive[unit].pio; - for (i = 0; i < ARRAY_SIZE(ata_acpi_pio_cycle); i++) - if (t > ata_acpi_pio_cycle[i]) - break; - pio_mask = (1 << i) - 1; + /* PIO */ + mode = ata_timing_cycle2mode(ATA_SHIFT_PIO, gtm->drive[unit].pio); + xfer_mask |= ata_xfer_mode2mask(mode); /* See if we have MWDMA or UDMA data. We don't bother with * MWDMA if UDMA is available as this means the BIOS set UDMA * and our error changedown if it works is UDMA to PIO anyway. */ - t = gtm->drive[unit].dma; - if (!(gtm->flags & (1 << (2 * unit)))) { - /* MWDMA */ - for (i = 0; i < ARRAY_SIZE(ata_acpi_mwdma_cycle); i++) - if (t > ata_acpi_mwdma_cycle[i]) - break; - mwdma_mask = (1 << i) - 1; - } else { - /* UDMA */ - for (i = 0; i < ARRAY_SIZE(ata_acpi_udma_cycle); i++) - if (t > ata_acpi_udma_cycle[i]) - break; - udma_mask = (1 << i) - 1; - } + if (!(gtm->flags & (1 << (2 * unit)))) + type = ATA_SHIFT_MWDMA; + else + type = ATA_SHIFT_UDMA; + + mode = ata_timing_cycle2mode(type, gtm->drive[unit].dma); + xfer_mask |= ata_xfer_mode2mask(mode); - return ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask); + return xfer_mask; } EXPORT_SYMBOL_GPL(ata_acpi_gtm_xfermask); diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 62c4b328b0b6..f01c1734b1d0 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2902,6 +2902,57 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, return 0; } +/** + * ata_timing_cycle2mode - find xfer mode for the specified cycle duration + * @xfer_shift: ATA_SHIFT_* value for transfer type to examine. + * @cycle: cycle duration in ns + * + * Return matching xfer mode for @cycle. The returned mode is of + * the transfer type specified by @xfer_shift. If @cycle is too + * slow for @xfer_shift, 0xff is returned. If @cycle is faster + * than the fastest known mode, the fasted mode is returned. + * + * LOCKING: + * None. + * + * RETURNS: + * Matching xfer_mode, 0xff if no match found. + */ +u8 ata_timing_cycle2mode(unsigned int xfer_shift, int cycle) +{ + u8 base_mode = 0xff, last_mode = 0xff; + const struct ata_xfer_ent *ent; + const struct ata_timing *t; + + for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) + if (ent->shift == xfer_shift) + base_mode = ent->base; + + for (t = ata_timing_find_mode(base_mode); + t && ata_xfer_mode2shift(t->mode) == xfer_shift; t++) { + unsigned short this_cycle; + + switch (xfer_shift) { + case ATA_SHIFT_PIO: + case ATA_SHIFT_MWDMA: + this_cycle = t->cycle; + break; + case ATA_SHIFT_UDMA: + this_cycle = t->udma; + break; + default: + return 0xff; + } + + if (cycle > this_cycle) + break; + + last_mode = t->mode; + } + + return last_mode; +} + /** * ata_down_xfermask_limit - adjust dev xfer masks downward * @dev: Device to adjust xfer masks @@ -7630,6 +7681,7 @@ EXPORT_SYMBOL_GPL(ata_pio_need_iordy); EXPORT_SYMBOL_GPL(ata_timing_find_mode); EXPORT_SYMBOL_GPL(ata_timing_compute); EXPORT_SYMBOL_GPL(ata_timing_merge); +EXPORT_SYMBOL_GPL(ata_timing_cycle2mode); #ifdef CONFIG_PCI EXPORT_SYMBOL_GPL(pci_test_config_bits); diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c index a4737a3d31cb..244098a80ce4 100644 --- a/drivers/ata/pata_acpi.c +++ b/drivers/ata/pata_acpi.c @@ -133,13 +133,14 @@ static void pacpi_set_piomode(struct ata_port *ap, struct ata_device *adev) { int unit = adev->devno; struct pata_acpi *acpi = ap->private_data; + const struct ata_timing *t; if (!(acpi->gtm.flags & 0x10)) unit = 0; /* Now stuff the nS values into the structure */ - acpi->gtm.drive[unit].pio = - ata_acpi_pio_cycle[adev->pio_mode - XFER_PIO_0]; + t = ata_timing_find_mode(adev->pio_mode); + acpi->gtm.drive[unit].pio = t->cycle; ata_acpi_stm(ap, &acpi->gtm); /* See what mode we actually got */ ata_acpi_gtm(ap, &acpi->gtm); @@ -155,18 +156,18 @@ static void pacpi_set_dmamode(struct ata_port *ap, struct ata_device *adev) { int unit = adev->devno; struct pata_acpi *acpi = ap->private_data; + const struct ata_timing *t; if (!(acpi->gtm.flags & 0x10)) unit = 0; /* Now stuff the nS values into the structure */ + t = ata_timing_find_mode(adev->dma_mode); if (adev->dma_mode >= XFER_UDMA_0) { - acpi->gtm.drive[unit].dma = - ata_acpi_udma_cycle[adev->dma_mode - XFER_UDMA_0]; + acpi->gtm.drive[unit].dma = t->udma; acpi->gtm.flags |= (1 << (2 * unit)); } else { - acpi->gtm.drive[unit].dma = - ata_acpi_mwdma_cycle[adev->dma_mode - XFER_MW_DMA_0]; + acpi->gtm.drive[unit].dma = t->cycle; acpi->gtm.flags &= ~(1 << (2 * unit)); } ata_acpi_stm(ap, &acpi->gtm); diff --git a/include/linux/libata.h b/include/linux/libata.h index 8022e5b2224d..8ede93b5c7a6 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -941,6 +941,7 @@ extern int ata_timing_compute(struct ata_device *, unsigned short, extern void ata_timing_merge(const struct ata_timing *, const struct ata_timing *, struct ata_timing *, unsigned int); +extern u8 ata_timing_cycle2mode(unsigned int xfer_shift, int cycle); enum { ATA_TIMING_SETUP = (1 << 0), @@ -961,10 +962,6 @@ enum { /* libata-acpi.c */ #ifdef CONFIG_ATA_ACPI -extern const unsigned int ata_acpi_pio_cycle[7]; -extern const unsigned int ata_acpi_mwdma_cycle[5]; -extern const unsigned int ata_acpi_udma_cycle[7]; - static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap) { if (ap->pflags & ATA_PFLAG_INIT_GTM_VALID) -- cgit v1.2.3-59-g8ed1b From 021ee9a6da1cfc57f6a6c769c3c898bdd4753108 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 18 Dec 2007 16:33:06 +0900 Subject: libata: reimplement ata_acpi_cbl_80wire() using ata_acpi_gtm_xfermask() Reimplement ata_acpi_cbl_80wire() using ata_acpi_gtm_xfermask() and while at it relocate the function below ata_acpi_gtm_xfermask(). New ata_acpi_cbl_80wire() implementation takes @gtm, in both pata_via and pata_amd, use the initial GTM value. Both are trying to peek initial BIOS configuration, so using initial caching value makes sense. This fixes ACPI part of cable detection in pata_amd which previously always returned 0 because configuring PIO0 during reset clears DMA configuration. Signed-off-by: Tejun Heo Cc: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/libata-acpi.c | 41 ++++++++++++++++------------------------- drivers/ata/pata_amd.c | 3 ++- drivers/ata/pata_via.c | 3 ++- include/linux/libata.h | 10 +++++++--- 4 files changed, 27 insertions(+), 30 deletions(-) diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index a6f1a6b56d8c..9e8ec19260af 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -490,38 +490,29 @@ EXPORT_SYMBOL_GPL(ata_acpi_gtm_xfermask); /** * ata_acpi_cbl_80wire - Check for 80 wire cable * @ap: Port to check + * @gtm: GTM data to use * - * Return 1 if the ACPI mode data for this port indicates the BIOS selected - * an 80wire mode. + * Return 1 if the @gtm indicates the BIOS selected an 80wire mode. */ - -int ata_acpi_cbl_80wire(struct ata_port *ap) +int ata_acpi_cbl_80wire(struct ata_port *ap, const struct ata_acpi_gtm *gtm) { - const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap); - int valid = 0; + struct ata_device *dev; - if (!gtm) - return 0; + ata_link_for_each_dev(dev, &ap->link) { + unsigned long xfer_mask, udma_mask; + + if (!ata_dev_enabled(dev)) + continue; + + xfer_mask = ata_acpi_gtm_xfermask(dev, gtm); + ata_unpack_xfermask(xfer_mask, NULL, NULL, &udma_mask); + + if (udma_mask & ~ATA_UDMA_MASK_40C) + return 1; + } - /* Split timing, DMA enabled */ - if ((gtm->flags & 0x11) == 0x11 && gtm->drive[0].dma < 55) - valid |= 1; - if ((gtm->flags & 0x14) == 0x14 && gtm->drive[1].dma < 55) - valid |= 2; - /* Shared timing, DMA enabled */ - if ((gtm->flags & 0x11) == 0x01 && gtm->drive[0].dma < 55) - valid |= 1; - if ((gtm->flags & 0x14) == 0x04 && gtm->drive[0].dma < 55) - valid |= 2; - - /* Drive check */ - if ((valid & 1) && ata_dev_enabled(&ap->link.device[0])) - return 1; - if ((valid & 2) && ata_dev_enabled(&ap->link.device[1])) - return 1; return 0; } - EXPORT_SYMBOL_GPL(ata_acpi_cbl_80wire); static void ata_acpi_gtf_to_tf(struct ata_device *dev, diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 3cc27b514654..e71125a4bd9b 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -272,7 +272,8 @@ static int nv_cable_detect(struct ata_port *ap) if ((udma & 0xC4) == 0xC4 || (udma & 0xC400) == 0xC400) cbl = ATA_CBL_PATA80; /* And a triple check across suspend/resume with ACPI around */ - if (ata_acpi_cbl_80wire(ap)) + if (ata_acpi_init_gtm(ap) && + ata_acpi_cbl_80wire(ap, ata_acpi_init_gtm(ap))) cbl = ATA_CBL_PATA80; return cbl; } diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 453d72bf2598..39627ab684bf 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -185,7 +185,8 @@ static int via_cable_detect(struct ata_port *ap) { if (ata66 & (0x10100000 >> (16 * ap->port_no))) return ATA_CBL_PATA80; /* Check with ACPI so we can spot BIOS reported SATA bridges */ - if (ata_acpi_cbl_80wire(ap)) + if (ata_acpi_init_gtm(ap) && + ata_acpi_cbl_80wire(ap, ata_acpi_init_gtm(ap))) return ATA_CBL_PATA80; return ATA_CBL_PATA40; } diff --git a/include/linux/libata.h b/include/linux/libata.h index 8ede93b5c7a6..cc4eaef6f889 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -968,18 +968,16 @@ static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap) return &ap->__acpi_init_gtm; return NULL; } -extern int ata_acpi_cbl_80wire(struct ata_port *ap); int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm); int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *stm); unsigned long ata_acpi_gtm_xfermask(struct ata_device *dev, const struct ata_acpi_gtm *gtm); - +int ata_acpi_cbl_80wire(struct ata_port *ap, const struct ata_acpi_gtm *gtm); #else static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap) { return NULL; } -static inline int ata_acpi_cbl_80wire(struct ata_port *ap) { return 0; } static inline int ata_acpi_stm(const struct ata_port *ap, struct ata_acpi_gtm *stm) @@ -998,6 +996,12 @@ static inline unsigned int ata_acpi_gtm_xfermask(struct ata_device *dev, { return 0; } + +static inline int ata_acpi_cbl_80wire(struct ata_port *ap, + const struct ata_acpi_gtm *gtm) +{ + return 0; +} #endif #ifdef CONFIG_PCI -- cgit v1.2.3-59-g8ed1b From ce54d1616302117fa98513ae916bb3333e1c02ea Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 18 Dec 2007 16:33:07 +0900 Subject: pata_amd: update mode selection for NV PATAs Cable detection on NV PATA hosts isn't implemented and the CBLID- cable isn't wired according to the sepc either, so both host-side and generic drive-side cable detections are broken. Till now, nv_cable_detect() relied on peeking BIOS and ACPI configurations to upgrade to 80C but this often results in misdetection of 40C cable as 80C. Also, the original implementation was broken in that by the time BIOS configuration is read it has already been cleared by programming PIO0 during reset. This patch reimplements NV mode selection such that... * BIOS configuration value is stored during driver attach and restored on detach. * Cable type is fixed to ATA_CBL_PATA_IGN and mode selection is soley done by nv_mode_filter() which peeks both BIOS and ACPI configurations and filter accordingly. Signed-off-by: Tejun Heo Cc: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/pata_amd.c | 129 +++++++++++++++++++++++++++++++++++-------------- 1 file changed, 93 insertions(+), 36 deletions(-) diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index e71125a4bd9b..761a66608d7b 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -220,6 +220,62 @@ static void amd133_set_dmamode(struct ata_port *ap, struct ata_device *adev) timing_setup(ap, adev, 0x40, adev->dma_mode, 4); } +/* Both host-side and drive-side detection results are worthless on NV + * PATAs. Ignore them and just follow what BIOS configured. Both the + * current configuration in PCI config reg and ACPI GTM result are + * cached during driver attach and are consulted to select transfer + * mode. + */ +static unsigned long nv_mode_filter(struct ata_device *dev, + unsigned long xfer_mask) +{ + static const unsigned int udma_mask_map[] = + { ATA_UDMA2, ATA_UDMA1, ATA_UDMA0, 0, + ATA_UDMA3, ATA_UDMA4, ATA_UDMA5, ATA_UDMA6 }; + struct ata_port *ap = dev->link->ap; + char acpi_str[32] = ""; + u32 saved_udma, udma; + const struct ata_acpi_gtm *gtm; + unsigned long bios_limit = 0, acpi_limit = 0, limit; + + /* find out what BIOS configured */ + udma = saved_udma = (unsigned long)ap->host->private_data; + + if (ap->port_no == 0) + udma >>= 16; + if (dev->devno == 0) + udma >>= 8; + + if ((udma & 0xc0) == 0xc0) + bios_limit = ata_pack_xfermask(0, 0, udma_mask_map[udma & 0x7]); + + /* consult ACPI GTM too */ + gtm = ata_acpi_init_gtm(ap); + if (gtm) { + acpi_limit = ata_acpi_gtm_xfermask(dev, gtm); + + snprintf(acpi_str, sizeof(acpi_str), " (%u:%u:0x%x)", + gtm->drive[0].dma, gtm->drive[1].dma, gtm->flags); + } + + /* be optimistic, EH can take care of things if something goes wrong */ + limit = bios_limit | acpi_limit; + + /* If PIO or DMA isn't configured at all, don't limit. Let EH + * handle it. + */ + if (!(limit & ATA_MASK_PIO)) + limit |= ATA_MASK_PIO; + if (!(limit & (ATA_MASK_MWDMA | ATA_MASK_UDMA))) + limit |= ATA_MASK_MWDMA | ATA_MASK_UDMA; + + ata_port_printk(ap, KERN_DEBUG, "nv_mode_filter: 0x%lx&0x%lx->0x%lx, " + "BIOS=0x%lx (0x%x) ACPI=0x%lx%s\n", + xfer_mask, limit, xfer_mask & limit, bios_limit, + saved_udma, acpi_limit, acpi_str); + + return xfer_mask & limit; +} /** * nv_probe_init - cable detection @@ -252,32 +308,6 @@ static void nv_error_handler(struct ata_port *ap) ata_std_postreset); } -static int nv_cable_detect(struct ata_port *ap) -{ - static const u8 bitmask[2] = {0x03, 0x0C}; - struct pci_dev *pdev = to_pci_dev(ap->host->dev); - u8 ata66; - u16 udma; - int cbl; - - pci_read_config_byte(pdev, 0x52, &ata66); - if (ata66 & bitmask[ap->port_no]) - cbl = ATA_CBL_PATA80; - else - cbl = ATA_CBL_PATA40; - - /* We now have to double check because the Nvidia boxes BIOS - doesn't always set the cable bits but does set mode bits */ - pci_read_config_word(pdev, 0x62 - 2 * ap->port_no, &udma); - if ((udma & 0xC4) == 0xC4 || (udma & 0xC400) == 0xC400) - cbl = ATA_CBL_PATA80; - /* And a triple check across suspend/resume with ACPI around */ - if (ata_acpi_init_gtm(ap) && - ata_acpi_cbl_80wire(ap, ata_acpi_init_gtm(ap))) - cbl = ATA_CBL_PATA80; - return cbl; -} - /** * nv100_set_piomode - set initial PIO mode data * @ap: ATA interface @@ -315,6 +345,14 @@ static void nv133_set_dmamode(struct ata_port *ap, struct ata_device *adev) timing_setup(ap, adev, 0x50, adev->dma_mode, 4); } +static void nv_host_stop(struct ata_host *host) +{ + u32 udma = (unsigned long)host->private_data; + + /* restore PCI config register 0x60 */ + pci_write_config_dword(to_pci_dev(host->dev), 0x60, udma); +} + static struct scsi_host_template amd_sht = { .module = THIS_MODULE, .name = DRV_NAME, @@ -479,7 +517,8 @@ static struct ata_port_operations nv100_port_ops = { .thaw = ata_bmdma_thaw, .error_handler = nv_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, - .cable_detect = nv_cable_detect, + .cable_detect = ata_cable_ignore, + .mode_filter = nv_mode_filter, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -496,6 +535,7 @@ static struct ata_port_operations nv100_port_ops = { .irq_on = ata_irq_on, .port_start = ata_sff_port_start, + .host_stop = nv_host_stop, }; static struct ata_port_operations nv133_port_ops = { @@ -512,7 +552,8 @@ static struct ata_port_operations nv133_port_ops = { .thaw = ata_bmdma_thaw, .error_handler = nv_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, - .cable_detect = nv_cable_detect, + .cable_detect = ata_cable_ignore, + .mode_filter = nv_mode_filter, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -529,6 +570,7 @@ static struct ata_port_operations nv133_port_ops = { .irq_on = ata_irq_on, .port_start = ata_sff_port_start, + .host_stop = nv_host_stop, }; static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) @@ -615,7 +657,8 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .port_ops = &amd100_port_ops } }; - const struct ata_port_info *ppi[] = { NULL, NULL }; + struct ata_port_info pi; + const struct ata_port_info *ppi[] = { &pi, NULL }; static int printed_version; int type = id->driver_data; u8 fifo; @@ -629,6 +672,19 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) if (type == 1 && pdev->revision > 0x7) type = 2; + /* Serenade ? */ + if (type == 5 && pdev->subsystem_vendor == PCI_VENDOR_ID_AMD && + pdev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE) + type = 6; /* UDMA 100 only */ + + /* + * Okay, type is determined now. Apply type-specific workarounds. + */ + pi = info[type]; + + if (type < 3) + ata_pci_clear_simplex(pdev); + /* Check for AMD7411 */ if (type == 3) /* FIFO is broken */ @@ -636,16 +692,17 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) else pci_write_config_byte(pdev, 0x41, fifo | 0xF0); - /* Serenade ? */ - if (type == 5 && pdev->subsystem_vendor == PCI_VENDOR_ID_AMD && - pdev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE) - type = 6; /* UDMA 100 only */ + /* Cable detection on Nvidia chips doesn't work too well, + * cache BIOS programmed UDMA mode. + */ + if (type == 7 || type == 8) { + u32 udma; - if (type < 3) - ata_pci_clear_simplex(pdev); + pci_read_config_dword(pdev, 0x60, &udma); + pi.private_data = (void *)(unsigned long)udma; + } /* And fire it up */ - ppi[0] = &info[type]; return ata_pci_init_one(pdev, ppi); } -- cgit v1.2.3-59-g8ed1b From e6a73ab1c8e814ac7b0d69f44fde63299b639489 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 13 Dec 2007 16:01:37 -0800 Subject: drivers/ata/libata-eh.c: fix printk warning drivers/ata/libata-eh.c: In function `ata_port_pbar_desc': drivers/ata/libata-eh.c:215: warning: long long unsigned int format, long unsigned int arg (arg 4) Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index d7d5a5ae04ef..1bc1acf3bbbb 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -231,7 +231,8 @@ void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset, if (offset < 0) ata_port_desc(ap, "%s %s%llu@0x%llx", name, type, len, start); else - ata_port_desc(ap, "%s 0x%llx", name, start + offset); + ata_port_desc(ap, "%s 0x%llx", name, + start + (unsigned long long)offset); } #endif /* CONFIG_PCI */ -- cgit v1.2.3-59-g8ed1b From 40f46f17819c2d199f99addc3278ff2eb11f3cd5 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 13 Dec 2007 16:01:38 -0800 Subject: pata_hpt37x: checkpatch fixes WARNING: line over 80 characters #70: FILE: drivers/ata/pata_hpt37x.c:850: + struct pci_dev *pdev_0 = pci_get_slot(pdev->bus, pdev->devfn - 1); ERROR: else should follow close brace '}' #78: FILE: drivers/ata/pata_hpt37x.c:858: + } + else total: 1 errors, 1 warnings, 100 lines checked Your patch has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/ata/pata_hpt37x.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index c79f066c2bc9..68eb34929cec 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -847,15 +847,16 @@ static u32 hpt374_read_freq(struct pci_dev *pdev) u32 freq; unsigned long io_base = pci_resource_start(pdev, 4); if (PCI_FUNC(pdev->devfn) & 1) { - struct pci_dev *pdev_0 = pci_get_slot(pdev->bus, pdev->devfn - 1); + struct pci_dev *pdev_0; + + pdev_0 = pci_get_slot(pdev->bus, pdev->devfn - 1); /* Someone hot plugged the controller on us ? */ if (pdev_0 == NULL) return 0; io_base = pci_resource_start(pdev_0, 4); freq = inl(io_base + 0x90); pci_dev_put(pdev_0); - } - else + } else freq = inl(io_base + 0x90); return freq; } -- cgit v1.2.3-59-g8ed1b From 1973a023a616b40ba33fd0d38b1055c62c88e73d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 5 Dec 2007 10:36:13 +0900 Subject: libata: convert NCQ test in ata_qc_issue() to ata_is_ncq() I missed one while converting to ata_is_*() protocol test helpers. Convert it. Pointed out by Jeff Garzik. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index f01c1734b1d0..2b57547bd740 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5990,7 +5990,7 @@ void ata_qc_issue(struct ata_queued_cmd *qc) */ WARN_ON(ap->ops->error_handler && ata_tag_valid(link->active_tag)); - if (prot == ATA_PROT_NCQ) { + if (ata_is_ncq(prot)) { WARN_ON(link->sactive & (1 << qc->tag)); if (!link->sactive) -- cgit v1.2.3-59-g8ed1b From 93f8fecbe72bc3c121f3605dd198ff39ef358522 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 5 Dec 2007 16:43:01 +0900 Subject: libata: make atapi_request_sense() use sg atapi_request_sense() is now the only left user of ata_sg_init_one(). Convert it to use sg interface. Signed-off-by: Tejun Heo Cc: Rusty Russel Signed-off-by: Jeff Garzik --- drivers/ata/libata-scsi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index f802dbce41ae..021cdc4cc260 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2341,7 +2341,9 @@ static void atapi_request_sense(struct ata_queued_cmd *qc) ata_qc_reinit(qc); - ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer)); + /* setup sg table and init transfer direction */ + sg_init_one(&qc->sgent, cmd->sense_buffer, sizeof(cmd->sense_buffer)); + ata_sg_init(qc, &qc->sgent, 1); qc->dma_dir = DMA_FROM_DEVICE; memset(&qc->cdb, 0, qc->dev->cdb_len); -- cgit v1.2.3-59-g8ed1b From 0106372db6dc135f300035ce8e93cddd7283a26a Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Wed, 5 Dec 2007 16:43:02 +0900 Subject: libata: zero xfer length on ATAPI data xfer IRQ is HSM violation Treat zero xfer length as HSM violation. While at it, add unlikely()'s to ATAPI ireason and transfer length checks. tj: Formatted patch and added unlikely()'s. Signed-off-by: Albert Lee Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 2b57547bd740..c9e6bd4d0686 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5309,12 +5309,15 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) bytes = (bc_hi << 8) | bc_lo; /* shall be cleared to zero, indicating xfer of data */ - if (ireason & (1 << 0)) + if (unlikely(ireason & (1 << 0))) goto err_out; /* make sure transfer direction matches expected */ i_write = ((ireason & (1 << 1)) == 0) ? 1 : 0; - if (do_write != i_write) + if (unlikely(do_write != i_write)) + goto err_out; + + if (unlikely(!bytes)) goto err_out; VPRINTK("ata%u: xfering %d bytes\n", ap->print_id, bytes); -- cgit v1.2.3-59-g8ed1b From 537b53c1692960b8b3b0324e886fbe48cb9e5c00 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 5 Dec 2007 16:43:04 +0900 Subject: cdrom: add more GPCMD_* constants Add GPCMD_* constants for READ_BUFFER, WRITE_12 and WRITE_BUFFER for completeness. These will be used libata. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/cdrom.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/linux/cdrom.h b/include/linux/cdrom.h index c6d3e22c0624..fcdc11b9609b 100644 --- a/include/linux/cdrom.h +++ b/include/linux/cdrom.h @@ -451,6 +451,7 @@ struct cdrom_generic_command #define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e #define GPCMD_READ_10 0x28 #define GPCMD_READ_12 0xa8 +#define GPCMD_READ_BUFFER 0x3c #define GPCMD_READ_BUFFER_CAPACITY 0x5c #define GPCMD_READ_CDVD_CAPACITY 0x25 #define GPCMD_READ_CD 0xbe @@ -480,7 +481,9 @@ struct cdrom_generic_command #define GPCMD_TEST_UNIT_READY 0x00 #define GPCMD_VERIFY_10 0x2f #define GPCMD_WRITE_10 0x2a +#define GPCMD_WRITE_12 0xaa #define GPCMD_WRITE_AND_VERIFY_10 0x2e +#define GPCMD_WRITE_BUFFER 0x3b /* This is listed as optional in ATAPI 2.6, but is (curiously) * missing from Mt. Fuji, Table 57. It _is_ mentioned in Mt. Fuji * Table 377 as an MMC command for SCSi devices though... Most ATAPI -- cgit v1.2.3-59-g8ed1b From 0dc36888d4422140f9eaf50f24953ec109f750a3 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 18 Dec 2007 16:34:43 -0500 Subject: libata: rename ATA_PROT_ATAPI_* to ATAPI_PROT_* ATA_PROT_ATAPI_* are ugly and naming schemes between ATA_PROT_* and ATA_PROT_ATAPI_* are inconsistent causing confusion. Rename them to ATAPI_PROT_* and make them consistent with ATA counterpart. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 28 ++++++++++++++-------------- drivers/ata/libata-eh.c | 8 ++++---- drivers/ata/libata-scsi.c | 10 +++++----- drivers/ata/libata-sff.c | 2 +- drivers/ata/pata_pdc202xx_old.c | 5 ++--- drivers/ata/pdc_adma.c | 2 +- drivers/ata/sata_inic162x.c | 2 +- drivers/ata/sata_promise.c | 26 ++++++++++++-------------- drivers/ata/sata_qstor.c | 2 +- drivers/ata/sata_sx4.c | 2 +- drivers/scsi/ipr.c | 6 +++--- drivers/scsi/libsas/sas_ata.c | 2 +- include/linux/ata.h | 12 ++++++------ 13 files changed, 52 insertions(+), 55 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index c9e6bd4d0686..2c9745a74d50 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4678,8 +4678,8 @@ int ata_check_atapi_dma(struct ata_queued_cmd *qc) */ static int atapi_qc_may_overflow(struct ata_queued_cmd *qc) { - if (qc->tf.protocol != ATA_PROT_ATAPI && - qc->tf.protocol != ATA_PROT_ATAPI_DMA) + if (qc->tf.protocol != ATAPI_PROT_PIO && + qc->tf.protocol != ATAPI_PROT_DMA) return 0; if (qc->tf.flags & ATA_TFLAG_WRITE) @@ -5161,13 +5161,13 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) ata_altstatus(ap); /* flush */ switch (qc->tf.protocol) { - case ATA_PROT_ATAPI: + case ATAPI_PROT_PIO: ap->hsm_task_state = HSM_ST; break; - case ATA_PROT_ATAPI_NODATA: + case ATAPI_PROT_NODATA: ap->hsm_task_state = HSM_ST_LAST; break; - case ATA_PROT_ATAPI_DMA: + case ATAPI_PROT_DMA: ap->hsm_task_state = HSM_ST_LAST; /* initiate bmdma */ ap->ops->bmdma_start(qc); @@ -5518,7 +5518,7 @@ fsm_start: case HSM_ST: /* complete command or read/write the data register */ - if (qc->tf.protocol == ATA_PROT_ATAPI) { + if (qc->tf.protocol == ATAPI_PROT_PIO) { /* ATAPI PIO protocol */ if ((status & ATA_DRQ) == 0) { /* No more data to transfer or device error. @@ -6073,11 +6073,11 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) switch (qc->tf.protocol) { case ATA_PROT_PIO: case ATA_PROT_NODATA: - case ATA_PROT_ATAPI: - case ATA_PROT_ATAPI_NODATA: + case ATAPI_PROT_PIO: + case ATAPI_PROT_NODATA: qc->tf.flags |= ATA_TFLAG_POLLING; break; - case ATA_PROT_ATAPI_DMA: + case ATAPI_PROT_DMA: if (qc->dev->flags & ATA_DFLAG_CDB_INTR) /* see ata_dma_blacklisted() */ BUG(); @@ -6141,8 +6141,8 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) break; - case ATA_PROT_ATAPI: - case ATA_PROT_ATAPI_NODATA: + case ATAPI_PROT_PIO: + case ATAPI_PROT_NODATA: if (qc->tf.flags & ATA_TFLAG_POLLING) ata_qc_set_polling(qc); @@ -6156,7 +6156,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) ata_port_queue_task(ap, ata_pio_task, qc, 0); break; - case ATA_PROT_ATAPI_DMA: + case ATAPI_PROT_DMA: WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING); ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ @@ -6217,7 +6217,7 @@ inline unsigned int ata_host_intr(struct ata_port *ap, break; case HSM_ST_LAST: if (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATA_PROT_ATAPI_DMA) { + qc->tf.protocol == ATAPI_PROT_DMA) { /* check status of DMA engine */ host_stat = ap->ops->bmdma_status(ap); VPRINTK("ata%u: host_stat 0x%X\n", @@ -6259,7 +6259,7 @@ inline unsigned int ata_host_intr(struct ata_port *ap, ata_hsm_move(ap, qc, status, 0); if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATA_PROT_ATAPI_DMA)) + qc->tf.protocol == ATAPI_PROT_DMA)) ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat); return 1; /* irq handled */ diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 1bc1acf3bbbb..419552603a16 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1299,10 +1299,10 @@ static unsigned int atapi_eh_request_sense(struct ata_queued_cmd *qc) /* is it pointless to prefer PIO for "safety reasons"? */ if (ap->flags & ATA_FLAG_PIO_DMA) { - tf.protocol = ATA_PROT_ATAPI_DMA; + tf.protocol = ATAPI_PROT_DMA; tf.feature |= ATAPI_PKT_DMA; } else { - tf.protocol = ATA_PROT_ATAPI; + tf.protocol = ATAPI_PROT_PIO; tf.lbam = SCSI_SENSE_BUFFERSIZE; tf.lbah = 0; } @@ -1979,8 +1979,8 @@ static void ata_eh_link_report(struct ata_link *link) [ATA_PROT_PIO] = "pio", [ATA_PROT_DMA] = "dma", [ATA_PROT_NCQ] = "ncq", - [ATA_PROT_ATAPI] = "pio", - [ATA_PROT_ATAPI_DMA] = "dma", + [ATAPI_PROT_PIO] = "pio", + [ATAPI_PROT_DMA] = "dma", }; snprintf(data_buf, sizeof(data_buf), " %s %u %s", diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 021cdc4cc260..5fd780e509d4 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2354,10 +2354,10 @@ static void atapi_request_sense(struct ata_queued_cmd *qc) qc->tf.command = ATA_CMD_PACKET; if (ata_pio_use_silly(ap)) { - qc->tf.protocol = ATA_PROT_ATAPI_DMA; + qc->tf.protocol = ATAPI_PROT_DMA; qc->tf.feature |= ATAPI_PKT_DMA; } else { - qc->tf.protocol = ATA_PROT_ATAPI; + qc->tf.protocol = ATAPI_PROT_PIO; qc->tf.lbam = SCSI_SENSE_BUFFERSIZE; qc->tf.lbah = 0; } @@ -2528,12 +2528,12 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc) if (using_pio || nodata) { /* no data, or PIO data xfer */ if (nodata) - qc->tf.protocol = ATA_PROT_ATAPI_NODATA; + qc->tf.protocol = ATAPI_PROT_NODATA; else - qc->tf.protocol = ATA_PROT_ATAPI; + qc->tf.protocol = ATAPI_PROT_PIO; } else { /* DMA data xfer */ - qc->tf.protocol = ATA_PROT_ATAPI_DMA; + qc->tf.protocol = ATAPI_PROT_DMA; qc->tf.feature |= ATAPI_PKT_DMA; if (atapi_dmadir && (scmd->sc_data_direction != DMA_TO_DEVICE)) diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index fd5fe4e7e75a..edeb4bea586c 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -417,7 +417,7 @@ void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset, ap->hsm_task_state = HSM_ST_IDLE; if (qc && (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATA_PROT_ATAPI_DMA)) { + qc->tf.protocol == ATAPI_PROT_DMA)) { u8 host_stat; host_stat = ap->ops->bmdma_status(ap); diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c index 6c9689b59b06..3ed866723e0c 100644 --- a/drivers/ata/pata_pdc202xx_old.c +++ b/drivers/ata/pata_pdc202xx_old.c @@ -168,8 +168,7 @@ static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc) pdc202xx_set_dmamode(ap, qc->dev); /* Cases the state machine will not complete correctly without help */ - if ((tf->flags & ATA_TFLAG_LBA48) || tf->protocol == ATA_PROT_ATAPI_DMA) - { + if ((tf->flags & ATA_TFLAG_LBA48) || tf->protocol == ATAPI_PROT_DMA) { len = qc->nbytes / 2; if (tf->flags & ATA_TFLAG_WRITE) @@ -208,7 +207,7 @@ static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc) void __iomem *atapi_reg = master + 0x20 + (4 * ap->port_no); /* Cases the state machine will not complete correctly */ - if (tf->protocol == ATA_PROT_ATAPI_DMA || ( tf->flags & ATA_TFLAG_LBA48)) { + if (tf->protocol == ATAPI_PROT_DMA || (tf->flags & ATA_TFLAG_LBA48)) { iowrite32(0, atapi_reg); iowrite8(ioread8(clock) & ~sel66, clock); } diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c index bd4c2a3c88d7..459cb7bb7d7f 100644 --- a/drivers/ata/pdc_adma.c +++ b/drivers/ata/pdc_adma.c @@ -455,7 +455,7 @@ static unsigned int adma_qc_issue(struct ata_queued_cmd *qc) adma_packet_start(qc); return 0; - case ATA_PROT_ATAPI_DMA: + case ATAPI_PROT_DMA: BUG(); break; diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c index 323c087e8cc1..96e614a1c169 100644 --- a/drivers/ata/sata_inic162x.c +++ b/drivers/ata/sata_inic162x.c @@ -585,7 +585,7 @@ static struct ata_port_operations inic_port_ops = { }; static struct ata_port_info inic_port_info = { - /* For some reason, ATA_PROT_ATAPI is broken on this + /* For some reason, ATAPI_PROT_PIO is broken on this * controller, and no, PIO_POLLING does't fix it. It somehow * manages to report the wrong ireason and ignoring ireason * results in machine lock up. Tell libata to always prefer diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index 9638faaa8111..01738d736d44 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -456,13 +456,13 @@ static void pdc_atapi_pkt(struct ata_queued_cmd *qc) * and seq id (byte 2) */ switch (qc->tf.protocol) { - case ATA_PROT_ATAPI_DMA: + case ATAPI_PROT_DMA: if (!(qc->tf.flags & ATA_TFLAG_WRITE)) buf32[0] = cpu_to_le32(PDC_PKT_READ); else buf32[0] = 0; break; - case ATA_PROT_ATAPI_NODATA: + case ATAPI_PROT_NODATA: buf32[0] = cpu_to_le32(PDC_PKT_NODATA); break; default: @@ -489,7 +489,7 @@ static void pdc_atapi_pkt(struct ata_queued_cmd *qc) buf[19] = qc->tf.lbal; /* set feature and byte counter registers */ - if (qc->tf.protocol != ATA_PROT_ATAPI_DMA) + if (qc->tf.protocol != ATAPI_PROT_DMA) feature = PDC_FEATURE_ATAPI_PIO; else feature = PDC_FEATURE_ATAPI_DMA; @@ -619,14 +619,14 @@ static void pdc_qc_prep(struct ata_queued_cmd *qc) pdc_pkt_footer(&qc->tf, pp->pkt, i); break; - case ATA_PROT_ATAPI: + case ATAPI_PROT_PIO: pdc_fill_sg(qc); break; - case ATA_PROT_ATAPI_DMA: + case ATAPI_PROT_DMA: pdc_fill_sg(qc); /*FALLTHROUGH*/ - case ATA_PROT_ATAPI_NODATA: + case ATAPI_PROT_NODATA: pdc_atapi_pkt(qc); break; @@ -746,8 +746,8 @@ static inline unsigned int pdc_host_intr(struct ata_port *ap, switch (qc->tf.protocol) { case ATA_PROT_DMA: case ATA_PROT_NODATA: - case ATA_PROT_ATAPI_DMA: - case ATA_PROT_ATAPI_NODATA: + case ATAPI_PROT_DMA: + case ATAPI_PROT_NODATA: qc->err_mask |= ac_err_mask(ata_wait_idle(ap)); ata_qc_complete(qc); handled = 1; @@ -892,7 +892,7 @@ static inline void pdc_packet_start(struct ata_queued_cmd *qc) static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc) { switch (qc->tf.protocol) { - case ATA_PROT_ATAPI_NODATA: + case ATAPI_PROT_NODATA: if (qc->dev->flags & ATA_DFLAG_CDB_INTR) break; /*FALLTHROUGH*/ @@ -900,7 +900,7 @@ static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc) if (qc->tf.flags & ATA_TFLAG_POLLING) break; /*FALLTHROUGH*/ - case ATA_PROT_ATAPI_DMA: + case ATAPI_PROT_DMA: case ATA_PROT_DMA: pdc_packet_start(qc); return 0; @@ -914,16 +914,14 @@ static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc) static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { - WARN_ON(tf->protocol == ATA_PROT_DMA || - tf->protocol == ATA_PROT_ATAPI_DMA); + WARN_ON(tf->protocol == ATA_PROT_DMA || tf->protocol == ATAPI_PROT_DMA); ata_tf_load(ap, tf); } static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { - WARN_ON(tf->protocol == ATA_PROT_DMA || - tf->protocol == ATA_PROT_ATAPI_DMA); + WARN_ON(tf->protocol == ATA_PROT_DMA || tf->protocol == ATAPI_PROT_DMA); ata_exec_command(ap, tf); } diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c index c68b241805fd..4e5f07bdd069 100644 --- a/drivers/ata/sata_qstor.c +++ b/drivers/ata/sata_qstor.c @@ -376,7 +376,7 @@ static unsigned int qs_qc_issue(struct ata_queued_cmd *qc) qs_packet_start(qc); return 0; - case ATA_PROT_ATAPI_DMA: + case ATAPI_PROT_DMA: BUG(); break; diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index 4d857185f33b..3de0c27caf53 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -700,7 +700,7 @@ static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc) pdc20621_packet_start(qc); return 0; - case ATA_PROT_ATAPI_DMA: + case ATAPI_PROT_DMA: BUG(); break; diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 0841df01bc19..3e78bc2d9170 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -5222,12 +5222,12 @@ static unsigned int ipr_qc_issue(struct ata_queued_cmd *qc) regs->flags |= IPR_ATA_FLAG_XFER_TYPE_DMA; break; - case ATA_PROT_ATAPI: - case ATA_PROT_ATAPI_NODATA: + case ATAPI_PROT_PIO: + case ATAPI_PROT_NODATA: regs->flags |= IPR_ATA_FLAG_PACKET_CMD; break; - case ATA_PROT_ATAPI_DMA: + case ATAPI_PROT_DMA: regs->flags |= IPR_ATA_FLAG_PACKET_CMD; regs->flags |= IPR_ATA_FLAG_XFER_TYPE_DMA; break; diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 831294de1d8d..f78d0605747d 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -200,7 +200,7 @@ static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc) case ATA_PROT_NCQ: task->ata_task.use_ncq = 1; /* fall through */ - case ATA_PROT_ATAPI_DMA: + case ATAPI_PROT_DMA: case ATA_PROT_DMA: task->ata_task.dma_xfer = 1; break; diff --git a/include/linux/ata.h b/include/linux/ata.h index c17e9404c88d..bc55471a4b2c 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -341,9 +341,9 @@ enum ata_tf_protocols { ATA_PROT_PIO, /* PIO data xfer */ ATA_PROT_DMA, /* DMA */ ATA_PROT_NCQ, /* NCQ */ - ATA_PROT_ATAPI, /* packet command, PIO data xfer*/ - ATA_PROT_ATAPI_NODATA, /* packet command, no data */ - ATA_PROT_ATAPI_DMA, /* packet command with special DMA sauce */ + ATAPI_PROT_NODATA, /* packet command, no data */ + ATAPI_PROT_PIO, /* packet command, PIO data xfer*/ + ATAPI_PROT_DMA, /* packet command with special DMA sauce */ }; enum ata_ioctls { @@ -395,11 +395,11 @@ static inline unsigned int ata_prot_flags(u8 prot) return ATA_PROT_FLAG_DMA; case ATA_PROT_NCQ: return ATA_PROT_FLAG_DMA | ATA_PROT_FLAG_NCQ; - case ATA_PROT_ATAPI_NODATA: + case ATAPI_PROT_NODATA: return ATA_PROT_FLAG_ATAPI; - case ATA_PROT_ATAPI: + case ATAPI_PROT_PIO: return ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_PIO; - case ATA_PROT_ATAPI_DMA: + case ATAPI_PROT_DMA: return ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_DMA; } return 0; -- cgit v1.2.3-59-g8ed1b From ceb0c642624f634c5b4f46b0e22df19be87a2e53 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 5 Dec 2007 16:43:06 +0900 Subject: libata: add ATAPI_* cmd types and implement atapi_cmd_type() Add ATAPI command types - ATAPI_READ, WRITE, RW_BUF, READ_CD and MISC, and implement atapi_cmd_type() which takes SCSI opcode and returns to which class the opcode belongs. This will be used later to improve ATAPI handling. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/include/linux/libata.h b/include/linux/libata.h index cc4eaef6f889..03afcd63202d 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -35,6 +35,7 @@ #include #include #include +#include /* * Define if arch has non-standard setup. This is a _PCI_ standard @@ -346,6 +347,12 @@ enum { ATA_DMA_MASK_ATA = (1 << 0), /* DMA on ATA Disk */ ATA_DMA_MASK_ATAPI = (1 << 1), /* DMA on ATAPI */ ATA_DMA_MASK_CFA = (1 << 2), /* DMA on CF Card */ + + /* ATAPI command types */ + ATAPI_READ = 0, /* READs */ + ATAPI_WRITE = 1, /* WRITEs */ + ATAPI_READ_CD = 2, /* READ CD [MSF] */ + ATAPI_MISC = 3, /* the rest */ }; enum ata_xfer_mask { @@ -1408,6 +1415,27 @@ static inline int ata_try_flush_cache(const struct ata_device *dev) ata_id_has_flush_ext(dev->id); } +static inline int atapi_cmd_type(u8 opcode) +{ + switch (opcode) { + case GPCMD_READ_10: + case GPCMD_READ_12: + return ATAPI_READ; + + case GPCMD_WRITE_10: + case GPCMD_WRITE_12: + case GPCMD_WRITE_AND_VERIFY_10: + return ATAPI_WRITE; + + case GPCMD_READ_CD: + case GPCMD_READ_CD_MSF: + return ATAPI_READ_CD; + + default: + return ATAPI_MISC; + } +} + static inline unsigned int ac_err_mask(u8 status) { if (status & (ATA_BUSY | ATA_DRQ)) -- cgit v1.2.3-59-g8ed1b From 55dba3120fbcbea6800f9a18503d25f73212a347 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 5 Dec 2007 16:43:07 +0900 Subject: libata: update ->data_xfer hook for ATAPI Depending on how many bytes are transferred as a unit, PIO data transfer may consume more bytes than requested. Knowing how much data is consumed is necessary to determine how much is left for draining. This patch update ->data_xfer such that it returns the number of consumed bytes. While at it, it also makes the following changes. * s/adev/dev/ * use READ/WRITE constants for rw indication * misc clean ups Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 46 +++++++++++++++++++++++++++++--------------- drivers/ata/pata_bf54x.c | 28 ++++++++++++++------------- drivers/ata/pata_ixp4xx_cf.c | 26 +++++++++++++------------ drivers/ata/pata_legacy.c | 36 ++++++++++++++++++---------------- drivers/ata/pata_qdi.c | 30 ++++++++++++++++------------- drivers/ata/pata_scc.c | 30 +++++++++++++++-------------- drivers/ata/pata_winbond.c | 28 +++++++++++++++------------ include/linux/libata.h | 11 ++++++----- 8 files changed, 133 insertions(+), 102 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 2c9745a74d50..39cedd949ed4 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4994,7 +4994,7 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) /** * ata_data_xfer - Transfer data by PIO - * @adev: device to target + * @dev: device to target * @buf: data buffer * @buflen: buffer length * @write_data: read/write @@ -5003,37 +5003,44 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) * * LOCKING: * Inherited from caller. + * + * RETURNS: + * Bytes consumed. */ -void ata_data_xfer(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data) +unsigned int ata_data_xfer(struct ata_device *dev, unsigned char *buf, + unsigned int buflen, int rw) { - struct ata_port *ap = adev->link->ap; + struct ata_port *ap = dev->link->ap; + void __iomem *data_addr = ap->ioaddr.data_addr; unsigned int words = buflen >> 1; /* Transfer multiple of 2 bytes */ - if (write_data) - iowrite16_rep(ap->ioaddr.data_addr, buf, words); + if (rw == READ) + ioread16_rep(data_addr, buf, words); else - ioread16_rep(ap->ioaddr.data_addr, buf, words); + iowrite16_rep(data_addr, buf, words); /* Transfer trailing 1 byte, if any. */ if (unlikely(buflen & 0x01)) { u16 align_buf[1] = { 0 }; unsigned char *trailing_buf = buf + buflen - 1; - if (write_data) { - memcpy(align_buf, trailing_buf, 1); - iowrite16(le16_to_cpu(align_buf[0]), ap->ioaddr.data_addr); - } else { - align_buf[0] = cpu_to_le16(ioread16(ap->ioaddr.data_addr)); + if (rw == READ) { + align_buf[0] = cpu_to_le16(ioread16(data_addr)); memcpy(trailing_buf, align_buf, 1); + } else { + memcpy(align_buf, trailing_buf, 1); + iowrite16(le16_to_cpu(align_buf[0]), data_addr); } + words++; } + + return words << 1; } /** * ata_data_xfer_noirq - Transfer data by PIO - * @adev: device to target + * @dev: device to target * @buf: data buffer * @buflen: buffer length * @write_data: read/write @@ -5043,14 +5050,21 @@ void ata_data_xfer(struct ata_device *adev, unsigned char *buf, * * LOCKING: * Inherited from caller. + * + * RETURNS: + * Bytes consumed. */ -void ata_data_xfer_noirq(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data) +unsigned int ata_data_xfer_noirq(struct ata_device *dev, unsigned char *buf, + unsigned int buflen, int rw) { unsigned long flags; + unsigned int consumed; + local_irq_save(flags); - ata_data_xfer(adev, buf, buflen, write_data); + consumed = ata_data_xfer(dev, buf, buflen, rw); local_irq_restore(flags); + + return consumed; } diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index 7842cc487359..41cd921082ba 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -1167,34 +1167,36 @@ static unsigned char bfin_bmdma_status(struct ata_port *ap) * Note: Original code is ata_data_xfer(). */ -static void bfin_data_xfer(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data) +static unsigned int bfin_data_xfer(struct ata_device *dev, unsigned char *buf, + unsigned int buflen, int rw) { - struct ata_port *ap = adev->link->ap; - unsigned int words = buflen >> 1; - unsigned short *buf16 = (u16 *) buf; + struct ata_port *ap = dev->link->ap; void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; + unsigned int words = buflen >> 1; + unsigned short *buf16 = (u16 *)buf; /* Transfer multiple of 2 bytes */ - if (write_data) { - write_atapi_data(base, words, buf16); - } else { + if (rw == READ) read_atapi_data(base, words, buf16); - } + else + write_atapi_data(base, words, buf16); /* Transfer trailing 1 byte, if any. */ if (unlikely(buflen & 0x01)) { unsigned short align_buf[1] = { 0 }; unsigned char *trailing_buf = buf + buflen - 1; - if (write_data) { - memcpy(align_buf, trailing_buf, 1); - write_atapi_data(base, 1, align_buf); - } else { + if (rw == READ) { read_atapi_data(base, 1, align_buf); memcpy(trailing_buf, align_buf, 1); + } else { + memcpy(align_buf, trailing_buf, 1); + write_atapi_data(base, 1, align_buf); } + words++; } + + return words << 1; } /** diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c index 120b5bfa7ce6..030878fedeb5 100644 --- a/drivers/ata/pata_ixp4xx_cf.c +++ b/drivers/ata/pata_ixp4xx_cf.c @@ -42,13 +42,13 @@ static int ixp4xx_set_mode(struct ata_link *link, struct ata_device **error) return 0; } -static void ixp4xx_mmio_data_xfer(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data) +static unsigned int ixp4xx_mmio_data_xfer(struct ata_device *dev, + unsigned char *buf, unsigned int buflen, int rw) { unsigned int i; unsigned int words = buflen >> 1; u16 *buf16 = (u16 *) buf; - struct ata_port *ap = adev->link->ap; + struct ata_port *ap = dev->link->ap; void __iomem *mmio = ap->ioaddr.data_addr; struct ixp4xx_pata_data *data = ap->host->dev->platform_data; @@ -59,30 +59,32 @@ static void ixp4xx_mmio_data_xfer(struct ata_device *adev, unsigned char *buf, udelay(100); /* Transfer multiple of 2 bytes */ - if (write_data) { - for (i = 0; i < words; i++) - writew(buf16[i], mmio); - } else { + if (rw == READ) for (i = 0; i < words; i++) buf16[i] = readw(mmio); - } + else + for (i = 0; i < words; i++) + writew(buf16[i], mmio); /* Transfer trailing 1 byte, if any. */ if (unlikely(buflen & 0x01)) { u16 align_buf[1] = { 0 }; unsigned char *trailing_buf = buf + buflen - 1; - if (write_data) { - memcpy(align_buf, trailing_buf, 1); - writew(align_buf[0], mmio); - } else { + if (rw == READ) { align_buf[0] = readw(mmio); memcpy(trailing_buf, align_buf, 1); + } else { + memcpy(align_buf, trailing_buf, 1); + writew(align_buf[0], mmio); } + words++; } udelay(100); *data->cs0_cfg |= 0x01; + + return words << 1; } static struct scsi_host_template ixp4xx_sht = { diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index 17159b5e1e43..dae85aa12e32 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -249,13 +249,14 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev) } -static void pdc_data_xfer_vlb(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data) +static unsigned int pdc_data_xfer_vlb(struct ata_device *dev, + unsigned char *buf, unsigned int buflen, int rw) { - struct ata_port *ap = adev->link->ap; - int slop = buflen & 3; - unsigned long flags; - if (ata_id_has_dword_io(adev->id)) { + struct ata_port *ap = dev->link->ap; + int slop = buflen & 3; + unsigned long flags; + local_irq_save(flags); /* Perform the 32bit I/O synchronization sequence */ @@ -264,26 +265,27 @@ static void pdc_data_xfer_vlb(struct ata_device *adev, unsigned char *buf, unsig ioread8(ap->ioaddr.nsect_addr); /* Now the data */ - - if (write_data) - iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); - else + if (rw == READ) ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); + else + iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); if (unlikely(slop)) { - __le32 pad = 0; - if (write_data) { - memcpy(&pad, buf + buflen - slop, slop); - iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); - } else { + u32 pad; + if (rw == READ) { pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); memcpy(buf + buflen - slop, &pad, slop); + } else { + memcpy(&pad, buf + buflen - slop, slop); + iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); } + buflen += 4 - slop; } local_irq_restore(flags); - } - else - ata_data_xfer_noirq(adev, buf, buflen, write_data); + } else + buflen = ata_data_xfer_noirq(dev, buf, buflen, rw); + + return buflen; } static struct ata_port_operations pdc20230_port_ops = { diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c index a4c0e502cb42..9f308ed76cc8 100644 --- a/drivers/ata/pata_qdi.c +++ b/drivers/ata/pata_qdi.c @@ -124,29 +124,33 @@ static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc) return ata_qc_issue_prot(qc); } -static void qdi_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data) +static unsigned int qdi_data_xfer(struct ata_device *dev, unsigned char *buf, + unsigned int buflen, int rw) { - struct ata_port *ap = adev->link->ap; - int slop = buflen & 3; + if (ata_id_has_dword_io(dev->id)) { + struct ata_port *ap = dev->link->ap; + int slop = buflen & 3; - if (ata_id_has_dword_io(adev->id)) { - if (write_data) - iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); - else + if (rw == READ) ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); + else + iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); if (unlikely(slop)) { - __le32 pad = 0; - if (write_data) { - memcpy(&pad, buf + buflen - slop, slop); - iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); - } else { + u32 pad; + if (rw == READ) { pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); memcpy(buf + buflen - slop, &pad, slop); + } else { + memcpy(&pad, buf + buflen - slop, slop); + iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); } + buflen += 4 - slop; } } else - ata_data_xfer(adev, buf, buflen, write_data); + buflen = ata_data_xfer(dev, buf, buflen, rw); + + return buflen; } static struct scsi_host_template qdi_sht = { diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index ea2ef9fc15be..55055b27524c 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -768,45 +768,47 @@ static u8 scc_bmdma_status (struct ata_port *ap) /** * scc_data_xfer - Transfer data by PIO - * @adev: device for this I/O + * @dev: device for this I/O * @buf: data buffer * @buflen: buffer length - * @write_data: read/write + * @rw: read/write * * Note: Original code is ata_data_xfer(). */ -static void scc_data_xfer (struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data) +static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf, + unsigned int buflen, int rw) { - struct ata_port *ap = adev->link->ap; + struct ata_port *ap = dev->link->ap; unsigned int words = buflen >> 1; unsigned int i; u16 *buf16 = (u16 *) buf; void __iomem *mmio = ap->ioaddr.data_addr; /* Transfer multiple of 2 bytes */ - if (write_data) { - for (i = 0; i < words; i++) - out_be32(mmio, cpu_to_le16(buf16[i])); - } else { + if (rw == READ) for (i = 0; i < words; i++) buf16[i] = le16_to_cpu(in_be32(mmio)); - } + else + for (i = 0; i < words; i++) + out_be32(mmio, cpu_to_le16(buf16[i])); /* Transfer trailing 1 byte, if any. */ if (unlikely(buflen & 0x01)) { u16 align_buf[1] = { 0 }; unsigned char *trailing_buf = buf + buflen - 1; - if (write_data) { - memcpy(align_buf, trailing_buf, 1); - out_be32(mmio, cpu_to_le16(align_buf[0])); - } else { + if (rw == READ) { align_buf[0] = le16_to_cpu(in_be32(mmio)); memcpy(trailing_buf, align_buf, 1); + } else { + memcpy(align_buf, trailing_buf, 1); + out_be32(mmio, cpu_to_le16(align_buf[0])); } + words++; } + + return words << 1; } /** diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c index 7116a9e7a8b2..7312e9182d69 100644 --- a/drivers/ata/pata_winbond.c +++ b/drivers/ata/pata_winbond.c @@ -92,29 +92,33 @@ static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev) } -static void winbond_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data) +static void winbond_data_xfer(struct ata_device *dev, unsigned char *buf, + unsigned int buflen, int rw) { - struct ata_port *ap = adev->link->ap; + struct ata_port *ap = dev->link->ap; int slop = buflen & 3; - if (ata_id_has_dword_io(adev->id)) { - if (write_data) - iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); - else + if (ata_id_has_dword_io(dev->id)) { + if (rw == READ) ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); + else + iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); if (unlikely(slop)) { - __le32 pad = 0; - if (write_data) { - memcpy(&pad, buf + buflen - slop, slop); - iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); - } else { + u32 pad; + if (rw == READ) { pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); memcpy(buf + buflen - slop, &pad, slop); + } else { + memcpy(&pad, buf + buflen - slop, slop); + iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); } + buflen += 4 - slop; } } else - ata_data_xfer(adev, buf, buflen, write_data); + buflen = ata_data_xfer(dev, buf, buflen, rw); + + return buflen; } static struct scsi_host_template winbond_sht = { diff --git a/include/linux/libata.h b/include/linux/libata.h index 03afcd63202d..7fa96cb4f6db 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -701,7 +701,8 @@ struct ata_port_operations { void (*bmdma_setup) (struct ata_queued_cmd *qc); void (*bmdma_start) (struct ata_queued_cmd *qc); - void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int); + unsigned int (*data_xfer) (struct ata_device *dev, unsigned char *buf, + unsigned int buflen, int rw); int (*qc_defer) (struct ata_queued_cmd *qc); void (*qc_prep) (struct ata_queued_cmd *qc); @@ -881,10 +882,10 @@ extern void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) extern int ata_port_start(struct ata_port *ap); extern int ata_sff_port_start(struct ata_port *ap); extern irqreturn_t ata_interrupt(int irq, void *dev_instance); -extern void ata_data_xfer(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data); -extern void ata_data_xfer_noirq(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data); +extern unsigned int ata_data_xfer(struct ata_device *dev, + unsigned char *buf, unsigned int buflen, int rw); +extern unsigned int ata_data_xfer_noirq(struct ata_device *dev, + unsigned char *buf, unsigned int buflen, int rw); extern int ata_std_qc_defer(struct ata_queued_cmd *qc); extern void ata_dumb_qc_prep(struct ata_queued_cmd *qc); extern void ata_qc_prep(struct ata_queued_cmd *qc); -- cgit v1.2.3-59-g8ed1b From 001102d7859be0e7f7b9f2d62b841f2c0f9c2640 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 5 Dec 2007 16:43:09 +0900 Subject: libata: kill non-sg DMA interface With atapi_request_sense() converted to use sg, there's no user of non-sg interface. Kill non-sg interface. * ATA_QCFLAG_SINGLE and ATA_QCFLAG_SG are removed. ATA_QCFLAG_DMAMAP is used instead. (this way no LLD change is necessary) * qc->buf_virt is removed. * ata_sg_init_one() and ata_sg_setup_one() are removed. Signed-off-by: Tejun Heo Cc: Rusty Russel Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 148 +++++----------------------------------------- include/linux/libata.h | 7 +-- 2 files changed, 16 insertions(+), 139 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 39cedd949ed4..76360f0ca20d 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4478,9 +4478,6 @@ void ata_sg_clean(struct ata_queued_cmd *qc) WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP)); WARN_ON(sg == NULL); - if (qc->flags & ATA_QCFLAG_SINGLE) - WARN_ON(qc->n_elem > 1); - VPRINTK("unmapping %u sg elements\n", qc->n_elem); /* if we padded the buffer out to 32-bit bound, and data @@ -4490,27 +4487,15 @@ void ata_sg_clean(struct ata_queued_cmd *qc) if (qc->pad_len && !(qc->tf.flags & ATA_TFLAG_WRITE)) pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); - if (qc->flags & ATA_QCFLAG_SG) { - if (qc->n_elem) - dma_unmap_sg(ap->dev, sg, qc->n_elem, dir); - /* restore last sg */ - sg_last(sg, qc->orig_n_elem)->length += qc->pad_len; - if (pad_buf) { - struct scatterlist *psg = &qc->pad_sgent; - void *addr = kmap_atomic(sg_page(psg), KM_IRQ0); - memcpy(addr + psg->offset, pad_buf, qc->pad_len); - kunmap_atomic(addr, KM_IRQ0); - } - } else { - if (qc->n_elem) - dma_unmap_single(ap->dev, - sg_dma_address(&sg[0]), sg_dma_len(&sg[0]), - dir); - /* restore sg */ - sg->length += qc->pad_len; - if (pad_buf) - memcpy(qc->buf_virt + sg->length - qc->pad_len, - pad_buf, qc->pad_len); + if (qc->n_elem) + dma_unmap_sg(ap->dev, sg, qc->n_elem, dir); + /* restore last sg */ + sg_last(sg, qc->orig_n_elem)->length += qc->pad_len; + if (pad_buf) { + struct scatterlist *psg = &qc->pad_sgent; + void *addr = kmap_atomic(sg_page(psg), KM_IRQ0); + memcpy(addr + psg->offset, pad_buf, qc->pad_len); + kunmap_atomic(addr, KM_IRQ0); } qc->flags &= ~ATA_QCFLAG_DMAMAP; @@ -4764,33 +4749,6 @@ void ata_dumb_qc_prep(struct ata_queued_cmd *qc) void ata_noop_qc_prep(struct ata_queued_cmd *qc) { } -/** - * ata_sg_init_one - Associate command with memory buffer - * @qc: Command to be associated - * @buf: Memory buffer - * @buflen: Length of memory buffer, in bytes. - * - * Initialize the data-related elements of queued_cmd @qc - * to point to a single memory buffer, @buf of byte length @buflen. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ - -void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) -{ - qc->flags |= ATA_QCFLAG_SINGLE; - - qc->__sg = &qc->sgent; - qc->n_elem = 1; - qc->orig_n_elem = 1; - qc->buf_virt = buf; - qc->nbytes = buflen; - qc->cursg = qc->__sg; - - sg_init_one(&qc->sgent, buf, buflen); -} - /** * ata_sg_init - Associate command with scatter-gather table. * @qc: Command to be associated @@ -4808,82 +4766,13 @@ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, unsigned int n_elem) { - qc->flags |= ATA_QCFLAG_SG; + qc->flags |= ATA_QCFLAG_DMAMAP; qc->__sg = sg; qc->n_elem = n_elem; qc->orig_n_elem = n_elem; qc->cursg = qc->__sg; } -/** - * ata_sg_setup_one - DMA-map the memory buffer associated with a command. - * @qc: Command with memory buffer to be mapped. - * - * DMA-map the memory buffer associated with queued_cmd @qc. - * - * LOCKING: - * spin_lock_irqsave(host lock) - * - * RETURNS: - * Zero on success, negative on error. - */ - -static int ata_sg_setup_one(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - int dir = qc->dma_dir; - struct scatterlist *sg = qc->__sg; - dma_addr_t dma_address; - int trim_sg = 0; - - /* we must lengthen transfers to end on a 32-bit boundary */ - qc->pad_len = sg->length & 3; - if (qc->pad_len) { - void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); - struct scatterlist *psg = &qc->pad_sgent; - - WARN_ON(qc->dev->class != ATA_DEV_ATAPI); - - memset(pad_buf, 0, ATA_DMA_PAD_SZ); - - if (qc->tf.flags & ATA_TFLAG_WRITE) - memcpy(pad_buf, qc->buf_virt + sg->length - qc->pad_len, - qc->pad_len); - - sg_dma_address(psg) = ap->pad_dma + (qc->tag * ATA_DMA_PAD_SZ); - sg_dma_len(psg) = ATA_DMA_PAD_SZ; - /* trim sg */ - sg->length -= qc->pad_len; - if (sg->length == 0) - trim_sg = 1; - - DPRINTK("padding done, sg->length=%u pad_len=%u\n", - sg->length, qc->pad_len); - } - - if (trim_sg) { - qc->n_elem--; - goto skip_map; - } - - dma_address = dma_map_single(ap->dev, qc->buf_virt, - sg->length, dir); - if (dma_mapping_error(dma_address)) { - /* restore sg */ - sg->length += qc->pad_len; - return -1; - } - - sg_dma_address(sg) = dma_address; - sg_dma_len(sg) = sg->length; - -skip_map: - DPRINTK("mapped buffer of %d bytes for %s\n", sg_dma_len(sg), - qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); - - return 0; -} - /** * ata_sg_setup - DMA-map the scatter-gather table associated with a command. * @qc: Command with scatter-gather table to be mapped. @@ -4906,7 +4795,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) int n_elem, pre_n_elem, dir, trim_sg = 0; VPRINTK("ENTER, ata%u\n", ap->print_id); - WARN_ON(!(qc->flags & ATA_QCFLAG_SG)); + WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP)); /* we must lengthen transfers to end on a 32-bit boundary */ qc->pad_len = lsg->length & 3; @@ -6025,16 +5914,10 @@ void ata_qc_issue(struct ata_queued_cmd *qc) if (ata_is_dma(prot) || (ata_is_pio(prot) && (ap->flags & ATA_FLAG_PIO_DMA))) { - if (qc->flags & ATA_QCFLAG_SG) { - if (ata_sg_setup(qc)) - goto sg_err; - } else if (qc->flags & ATA_QCFLAG_SINGLE) { - if (ata_sg_setup_one(qc)) - goto sg_err; - } - } else { - qc->flags &= ~ATA_QCFLAG_DMAMAP; - } + if (ata_sg_setup(qc)) + goto sg_err; + } else + qc->flags &= ATA_QCFLAG_DMAMAP; /* if device is sleeping, schedule softreset and abort the link */ if (unlikely(qc->dev->flags & ATA_DFLAG_SLEEPING)) { @@ -7612,7 +7495,6 @@ EXPORT_SYMBOL_GPL(ata_host_register); EXPORT_SYMBOL_GPL(ata_host_activate); EXPORT_SYMBOL_GPL(ata_host_detach); EXPORT_SYMBOL_GPL(ata_sg_init); -EXPORT_SYMBOL_GPL(ata_sg_init_one); EXPORT_SYMBOL_GPL(ata_hsm_move); EXPORT_SYMBOL_GPL(ata_qc_complete); EXPORT_SYMBOL_GPL(ata_qc_complete_multiple); diff --git a/include/linux/libata.h b/include/linux/libata.h index 7fa96cb4f6db..acd90ad78417 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -219,9 +219,7 @@ enum { /* struct ata_queued_cmd flags */ ATA_QCFLAG_ACTIVE = (1 << 0), /* cmd not yet ack'd to scsi lyer */ - ATA_QCFLAG_SG = (1 << 1), /* have s/g table? */ - ATA_QCFLAG_SINGLE = (1 << 2), /* no s/g, just a single buffer */ - ATA_QCFLAG_DMAMAP = ATA_QCFLAG_SG | ATA_QCFLAG_SINGLE, + ATA_QCFLAG_DMAMAP = (1 << 1), /* SG table is DMA mapped */ ATA_QCFLAG_IO = (1 << 3), /* standard IO command */ ATA_QCFLAG_RESULT_TF = (1 << 4), /* result TF requested */ ATA_QCFLAG_CLEAR_EXCL = (1 << 5), /* clear excl_link on completion */ @@ -475,7 +473,6 @@ struct ata_queued_cmd { struct scatterlist sgent; struct scatterlist pad_sgent; - void *buf_virt; /* DO NOT iterate over __sg manually, use ata_for_each_sg() */ struct scatterlist *__sg; @@ -891,8 +888,6 @@ extern void ata_dumb_qc_prep(struct ata_queued_cmd *qc); extern void ata_qc_prep(struct ata_queued_cmd *qc); extern void ata_noop_qc_prep(struct ata_queued_cmd *qc); extern unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc); -extern void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, - unsigned int buflen); extern void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, unsigned int n_elem); extern unsigned int ata_dev_classify(const struct ata_taskfile *tf); -- cgit v1.2.3-59-g8ed1b From f92a26365a72333f418abe82700c6030d4a1a807 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 5 Dec 2007 16:43:10 +0900 Subject: libata: change ATA_QCFLAG_DMAMAP semantics ATA_QCFLAG_DMAMAP was a bit peculiar in that it got set during qc initialization and cleared if DMA mapping wasn't necessary. Make it more straight forward by making the following changes. * Don't set it during initialization. Set it after DMA is actually mapped. * Add BUG_ON() to guarantee that there is data to transfer if DMAMAP is set. This always holds for the current code. The BUG_ON() is for docummentation and sanity check. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 76360f0ca20d..865428a64de3 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4475,7 +4475,6 @@ void ata_sg_clean(struct ata_queued_cmd *qc) int dir = qc->dma_dir; void *pad_buf = NULL; - WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP)); WARN_ON(sg == NULL); VPRINTK("unmapping %u sg elements\n", qc->n_elem); @@ -4762,11 +4761,9 @@ void ata_noop_qc_prep(struct ata_queued_cmd *qc) { } * LOCKING: * spin_lock_irqsave(host lock) */ - void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, unsigned int n_elem) { - qc->flags |= ATA_QCFLAG_DMAMAP; qc->__sg = sg; qc->n_elem = n_elem; qc->orig_n_elem = n_elem; @@ -4795,7 +4792,6 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) int n_elem, pre_n_elem, dir, trim_sg = 0; VPRINTK("ENTER, ata%u\n", ap->print_id); - WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP)); /* we must lengthen transfers to end on a 32-bit boundary */ qc->pad_len = lsg->length & 3; @@ -4855,6 +4851,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) skip_map: qc->n_elem = n_elem; + qc->flags |= ATA_QCFLAG_DMAMAP; return 0; } @@ -5912,12 +5909,15 @@ void ata_qc_issue(struct ata_queued_cmd *qc) qc->flags |= ATA_QCFLAG_ACTIVE; ap->qc_active |= 1 << qc->tag; + /* We guarantee to LLDs that they will have at least one + * non-zero sg if the command is a data command. + */ + BUG_ON(ata_is_data(prot) && (!qc->__sg || !qc->n_elem || !qc->nbytes)); + if (ata_is_dma(prot) || (ata_is_pio(prot) && - (ap->flags & ATA_FLAG_PIO_DMA))) { + (ap->flags & ATA_FLAG_PIO_DMA))) if (ata_sg_setup(qc)) goto sg_err; - } else - qc->flags &= ATA_QCFLAG_DMAMAP; /* if device is sleeping, schedule softreset and abort the link */ if (unlikely(qc->dev->flags & ATA_DFLAG_SLEEPING)) { @@ -5935,7 +5935,6 @@ void ata_qc_issue(struct ata_queued_cmd *qc) return; sg_err: - qc->flags &= ~ATA_QCFLAG_DMAMAP; qc->err_mask |= AC_ERR_SYSTEM; err: ata_qc_complete(qc); -- cgit v1.2.3-59-g8ed1b From ff2aeb1eb64c8a4770a6304f9addbae9f9828646 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 5 Dec 2007 16:43:11 +0900 Subject: libata: convert to chained sg libata used private sg iterator to handle padding sg. Now that sg can be chained, padding can be handled using standard sg ops. Convert to chained sg. * s/qc->__sg/qc->sg/ * s/qc->pad_sgent/qc->extra_sg[]/. Because chaining consumes one sg entry. There need to be two extra sg entries. The renaming is also for future addition of other extra sg entries. * Padding setup is moved into ata_sg_setup_extra() which is organized in a way that future addition of other extra sg entries is easy. * qc->orig_n_elem is unused and removed. * qc->n_elem now contains the number of sg entries that LLDs should map. qc->mapped_n_elem is added to carry the original number of mapped sgs for unmapping. * The last sg of the original sg list is used to chain to extra sg list. The original last sg is pointed to by qc->last_sg and the content is stored in qc->saved_last_sg. It's restored during ata_sg_clean(). * All sg walking code has been updated. Unnecessary assertions and checks for conditions the core layer already guarantees are removed. Signed-off-by: Tejun Heo Cc: Jens Axboe Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 18 ++-- drivers/ata/libata-core.c | 201 +++++++++++++++++++++++++----------------- drivers/ata/libata-scsi.c | 2 +- drivers/ata/pata_bf54x.c | 13 +-- drivers/ata/pata_icside.c | 3 +- drivers/ata/pdc_adma.c | 3 +- drivers/ata/sata_fsl.c | 4 +- drivers/ata/sata_mv.c | 3 +- drivers/ata/sata_nv.c | 25 ++---- drivers/ata/sata_promise.c | 40 ++++----- drivers/ata/sata_qstor.c | 13 +-- drivers/ata/sata_sil24.c | 6 +- drivers/ata/sata_sx4.c | 4 +- drivers/scsi/ipr.c | 3 +- drivers/scsi/libsas/sas_ata.c | 10 +-- include/linux/libata.h | 42 ++------- 16 files changed, 193 insertions(+), 197 deletions(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 5eee91c73c90..cffad07c65bf 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1483,28 +1483,24 @@ static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf) static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl) { struct scatterlist *sg; - struct ahci_sg *ahci_sg; - unsigned int n_sg = 0; + struct ahci_sg *ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ; + unsigned int si; VPRINTK("ENTER\n"); /* * Next, the S/G list. */ - ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ; - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { dma_addr_t addr = sg_dma_address(sg); u32 sg_len = sg_dma_len(sg); - ahci_sg->addr = cpu_to_le32(addr & 0xffffffff); - ahci_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16); - ahci_sg->flags_size = cpu_to_le32(sg_len - 1); - - ahci_sg++; - n_sg++; + ahci_sg[si].addr = cpu_to_le32(addr & 0xffffffff); + ahci_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16); + ahci_sg[si].flags_size = cpu_to_le32(sg_len - 1); } - return n_sg; + return si; } static void ahci_qc_prep(struct ata_queued_cmd *qc) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 865428a64de3..e998028302da 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4471,13 +4471,13 @@ static unsigned int ata_dev_init_params(struct ata_device *dev, void ata_sg_clean(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - struct scatterlist *sg = qc->__sg; + struct scatterlist *sg = qc->sg; int dir = qc->dma_dir; void *pad_buf = NULL; WARN_ON(sg == NULL); - VPRINTK("unmapping %u sg elements\n", qc->n_elem); + VPRINTK("unmapping %u sg elements\n", qc->mapped_n_elem); /* if we padded the buffer out to 32-bit bound, and data * xfer direction is from-device, we must copy from the @@ -4486,19 +4486,20 @@ void ata_sg_clean(struct ata_queued_cmd *qc) if (qc->pad_len && !(qc->tf.flags & ATA_TFLAG_WRITE)) pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); - if (qc->n_elem) - dma_unmap_sg(ap->dev, sg, qc->n_elem, dir); + if (qc->mapped_n_elem) + dma_unmap_sg(ap->dev, sg, qc->mapped_n_elem, dir); /* restore last sg */ - sg_last(sg, qc->orig_n_elem)->length += qc->pad_len; + if (qc->last_sg) + *qc->last_sg = qc->saved_last_sg; if (pad_buf) { - struct scatterlist *psg = &qc->pad_sgent; + struct scatterlist *psg = &qc->extra_sg[1]; void *addr = kmap_atomic(sg_page(psg), KM_IRQ0); memcpy(addr + psg->offset, pad_buf, qc->pad_len); kunmap_atomic(addr, KM_IRQ0); } qc->flags &= ~ATA_QCFLAG_DMAMAP; - qc->__sg = NULL; + qc->sg = NULL; } /** @@ -4516,13 +4517,10 @@ static void ata_fill_sg(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct scatterlist *sg; - unsigned int idx; + unsigned int si, pi; - WARN_ON(qc->__sg == NULL); - WARN_ON(qc->n_elem == 0 && qc->pad_len == 0); - - idx = 0; - ata_for_each_sg(sg, qc) { + pi = 0; + for_each_sg(qc->sg, sg, qc->n_elem, si) { u32 addr, offset; u32 sg_len, len; @@ -4539,18 +4537,17 @@ static void ata_fill_sg(struct ata_queued_cmd *qc) if ((offset + sg_len) > 0x10000) len = 0x10000 - offset; - ap->prd[idx].addr = cpu_to_le32(addr); - ap->prd[idx].flags_len = cpu_to_le32(len & 0xffff); - VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len); + ap->prd[pi].addr = cpu_to_le32(addr); + ap->prd[pi].flags_len = cpu_to_le32(len & 0xffff); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len); - idx++; + pi++; sg_len -= len; addr += len; } } - if (idx) - ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); + ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); } /** @@ -4570,13 +4567,10 @@ static void ata_fill_sg_dumb(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct scatterlist *sg; - unsigned int idx; - - WARN_ON(qc->__sg == NULL); - WARN_ON(qc->n_elem == 0 && qc->pad_len == 0); + unsigned int si, pi; - idx = 0; - ata_for_each_sg(sg, qc) { + pi = 0; + for_each_sg(qc->sg, sg, qc->n_elem, si) { u32 addr, offset; u32 sg_len, len, blen; @@ -4594,25 +4588,24 @@ static void ata_fill_sg_dumb(struct ata_queued_cmd *qc) len = 0x10000 - offset; blen = len & 0xffff; - ap->prd[idx].addr = cpu_to_le32(addr); + ap->prd[pi].addr = cpu_to_le32(addr); if (blen == 0) { /* Some PATA chipsets like the CS5530 can't cope with 0x0000 meaning 64K as the spec says */ - ap->prd[idx].flags_len = cpu_to_le32(0x8000); + ap->prd[pi].flags_len = cpu_to_le32(0x8000); blen = 0x8000; - ap->prd[++idx].addr = cpu_to_le32(addr + 0x8000); + ap->prd[++pi].addr = cpu_to_le32(addr + 0x8000); } - ap->prd[idx].flags_len = cpu_to_le32(blen); - VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len); + ap->prd[pi].flags_len = cpu_to_le32(blen); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len); - idx++; + pi++; sg_len -= len; addr += len; } } - if (idx) - ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); + ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); } /** @@ -4764,54 +4757,48 @@ void ata_noop_qc_prep(struct ata_queued_cmd *qc) { } void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, unsigned int n_elem) { - qc->__sg = sg; + qc->sg = sg; qc->n_elem = n_elem; - qc->orig_n_elem = n_elem; - qc->cursg = qc->__sg; + qc->cursg = qc->sg; } -/** - * ata_sg_setup - DMA-map the scatter-gather table associated with a command. - * @qc: Command with scatter-gather table to be mapped. - * - * DMA-map the scatter-gather table associated with queued_cmd @qc. - * - * LOCKING: - * spin_lock_irqsave(host lock) - * - * RETURNS: - * Zero on success, negative on error. - * - */ - -static int ata_sg_setup(struct ata_queued_cmd *qc) +static unsigned int ata_sg_setup_extra(struct ata_queued_cmd *qc, + unsigned int *n_elem_extra) { struct ata_port *ap = qc->ap; - struct scatterlist *sg = qc->__sg; - struct scatterlist *lsg = sg_last(qc->__sg, qc->n_elem); - int n_elem, pre_n_elem, dir, trim_sg = 0; + unsigned int n_elem = qc->n_elem; + struct scatterlist *lsg, *copy_lsg = NULL, *tsg = NULL, *esg = NULL; - VPRINTK("ENTER, ata%u\n", ap->print_id); + *n_elem_extra = 0; + + /* needs padding? */ + qc->pad_len = qc->nbytes & 3; + + if (likely(!qc->pad_len)) + return n_elem; + + /* locate last sg and save it */ + lsg = sg_last(qc->sg, n_elem); + qc->last_sg = lsg; + qc->saved_last_sg = *lsg; + + sg_init_table(qc->extra_sg, ARRAY_SIZE(qc->extra_sg)); - /* we must lengthen transfers to end on a 32-bit boundary */ - qc->pad_len = lsg->length & 3; if (qc->pad_len) { + struct scatterlist *psg = &qc->extra_sg[1]; void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); - struct scatterlist *psg = &qc->pad_sgent; unsigned int offset; WARN_ON(qc->dev->class != ATA_DEV_ATAPI); memset(pad_buf, 0, ATA_DMA_PAD_SZ); - /* - * psg->page/offset are used to copy to-be-written + /* psg->page/offset are used to copy to-be-written * data in this function or read data in ata_sg_clean. */ offset = lsg->offset + lsg->length - qc->pad_len; - sg_init_table(psg, 1); sg_set_page(psg, nth_page(sg_page(lsg), offset >> PAGE_SHIFT), - qc->pad_len, offset_in_page(offset)); + qc->pad_len, offset_in_page(offset)); if (qc->tf.flags & ATA_TFLAG_WRITE) { void *addr = kmap_atomic(sg_page(psg), KM_IRQ0); @@ -4821,36 +4808,84 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) sg_dma_address(psg) = ap->pad_dma + (qc->tag * ATA_DMA_PAD_SZ); sg_dma_len(psg) = ATA_DMA_PAD_SZ; - /* trim last sg */ + + /* Trim the last sg entry and chain the original and + * padding sg lists. + * + * Because chaining consumes one sg entry, one extra + * sg entry is allocated and the last sg entry is + * copied to it if the length isn't zero after padded + * amount is removed. + * + * If the last sg entry is completely replaced by + * padding sg entry, the first sg entry is skipped + * while chaining. + */ lsg->length -= qc->pad_len; - if (lsg->length == 0) - trim_sg = 1; + if (lsg->length) { + copy_lsg = &qc->extra_sg[0]; + tsg = &qc->extra_sg[0]; + } else { + n_elem--; + tsg = &qc->extra_sg[1]; + } + + esg = &qc->extra_sg[1]; - DPRINTK("padding done, sg[%d].length=%u pad_len=%u\n", - qc->n_elem - 1, lsg->length, qc->pad_len); + (*n_elem_extra)++; } - pre_n_elem = qc->n_elem; - if (trim_sg && pre_n_elem) - pre_n_elem--; + if (copy_lsg) + sg_set_page(copy_lsg, sg_page(lsg), lsg->length, lsg->offset); - if (!pre_n_elem) { - n_elem = 0; - goto skip_map; + sg_chain(lsg, 1, tsg); + sg_mark_end(esg); + + /* sglist can't start with chaining sg entry, fast forward */ + if (qc->sg == lsg) { + qc->sg = tsg; + qc->cursg = tsg; } - dir = qc->dma_dir; - n_elem = dma_map_sg(ap->dev, sg, pre_n_elem, dir); - if (n_elem < 1) { - /* restore last sg */ - lsg->length += qc->pad_len; - return -1; + return n_elem; +} + +/** + * ata_sg_setup - DMA-map the scatter-gather table associated with a command. + * @qc: Command with scatter-gather table to be mapped. + * + * DMA-map the scatter-gather table associated with queued_cmd @qc. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * Zero on success, negative on error. + * + */ +static int ata_sg_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned int n_elem, n_elem_extra; + + VPRINTK("ENTER, ata%u\n", ap->print_id); + + n_elem = ata_sg_setup_extra(qc, &n_elem_extra); + + if (n_elem) { + n_elem = dma_map_sg(ap->dev, qc->sg, n_elem, qc->dma_dir); + if (n_elem < 1) { + /* restore last sg */ + if (qc->last_sg) + *qc->last_sg = qc->saved_last_sg; + return -1; + } + DPRINTK("%d sg elements mapped\n", n_elem); } - DPRINTK("%d sg elements mapped\n", n_elem); + qc->n_elem = qc->mapped_n_elem = n_elem; + qc->n_elem += n_elem_extra; -skip_map: - qc->n_elem = n_elem; qc->flags |= ATA_QCFLAG_DMAMAP; return 0; @@ -5912,7 +5947,7 @@ void ata_qc_issue(struct ata_queued_cmd *qc) /* We guarantee to LLDs that they will have at least one * non-zero sg if the command is a data command. */ - BUG_ON(ata_is_data(prot) && (!qc->__sg || !qc->n_elem || !qc->nbytes)); + BUG_ON(ata_is_data(prot) && (!qc->sg || !qc->n_elem || !qc->nbytes)); if (ata_is_dma(prot) || (ata_is_pio(prot) && (ap->flags & ATA_FLAG_PIO_DMA))) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 5fd780e509d4..42bf61599730 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -517,7 +517,7 @@ static struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev, qc->scsicmd = cmd; qc->scsidone = done; - qc->__sg = scsi_sglist(cmd); + qc->sg = scsi_sglist(cmd); qc->n_elem = scsi_sg_count(cmd); } else { cmd->result = (DID_OK << 16) | (QUEUE_FULL << 1); diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index 41cd921082ba..a32e3c44a606 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -832,6 +832,7 @@ static void bfin_bmdma_setup(struct ata_queued_cmd *qc) { unsigned short config = WDSIZE_16; struct scatterlist *sg; + unsigned int si; pr_debug("in atapi dma setup\n"); /* Program the ATA_CTRL register with dir */ @@ -839,7 +840,7 @@ static void bfin_bmdma_setup(struct ata_queued_cmd *qc) /* fill the ATAPI DMA controller */ set_dma_config(CH_ATAPI_TX, config); set_dma_x_modify(CH_ATAPI_TX, 2); - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { set_dma_start_addr(CH_ATAPI_TX, sg_dma_address(sg)); set_dma_x_count(CH_ATAPI_TX, sg_dma_len(sg) >> 1); } @@ -848,7 +849,7 @@ static void bfin_bmdma_setup(struct ata_queued_cmd *qc) /* fill the ATAPI DMA controller */ set_dma_config(CH_ATAPI_RX, config); set_dma_x_modify(CH_ATAPI_RX, 2); - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { set_dma_start_addr(CH_ATAPI_RX, sg_dma_address(sg)); set_dma_x_count(CH_ATAPI_RX, sg_dma_len(sg) >> 1); } @@ -867,6 +868,7 @@ static void bfin_bmdma_start(struct ata_queued_cmd *qc) struct ata_port *ap = qc->ap; void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; struct scatterlist *sg; + unsigned int si; pr_debug("in atapi dma start\n"); if (!(ap->udma_mask || ap->mwdma_mask)) @@ -881,7 +883,7 @@ static void bfin_bmdma_start(struct ata_queued_cmd *qc) * data cache is enabled. Otherwise, this loop * is an empty loop and optimized out. */ - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { flush_dcache_range(sg_dma_address(sg), sg_dma_address(sg) + sg_dma_len(sg)); } @@ -910,7 +912,7 @@ static void bfin_bmdma_start(struct ata_queued_cmd *qc) ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | TFRCNT_RST); /* Set transfer length to buffer len */ - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { ATAPI_SET_XFER_LEN(base, (sg_dma_len(sg) >> 1)); } @@ -932,6 +934,7 @@ static void bfin_bmdma_stop(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct scatterlist *sg; + unsigned int si; pr_debug("in atapi dma stop\n"); if (!(ap->udma_mask || ap->mwdma_mask)) @@ -950,7 +953,7 @@ static void bfin_bmdma_stop(struct ata_queued_cmd *qc) * data cache is enabled. Otherwise, this loop * is an empty loop and optimized out. */ - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { invalidate_dcache_range( sg_dma_address(sg), sg_dma_address(sg) diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c index 842fe08a3c13..5b8586dac63b 100644 --- a/drivers/ata/pata_icside.c +++ b/drivers/ata/pata_icside.c @@ -224,6 +224,7 @@ static void pata_icside_bmdma_setup(struct ata_queued_cmd *qc) struct pata_icside_state *state = ap->host->private_data; struct scatterlist *sg, *rsg = state->sg; unsigned int write = qc->tf.flags & ATA_TFLAG_WRITE; + unsigned int si; /* * We are simplex; BUG if we try to fiddle with DMA @@ -234,7 +235,7 @@ static void pata_icside_bmdma_setup(struct ata_queued_cmd *qc) /* * Copy ATAs scattered sg list into a contiguous array of sg */ - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { memcpy(rsg, sg, sizeof(*sg)); rsg++; } diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c index 459cb7bb7d7f..8e1b7e9c0ae4 100644 --- a/drivers/ata/pdc_adma.c +++ b/drivers/ata/pdc_adma.c @@ -321,8 +321,9 @@ static int adma_fill_sg(struct ata_queued_cmd *qc) u8 *buf = pp->pkt, *last_buf = NULL; int i = (2 + buf[3]) * 8; u8 pFLAGS = pORD | ((qc->tf.flags & ATA_TFLAG_WRITE) ? pDIRO : 0); + unsigned int si; - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { u32 addr; u32 len; diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index a3c33f165427..d041709dee1a 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -323,6 +323,7 @@ static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc, struct scatterlist *sg; unsigned int num_prde = 0; u32 ttl_dwords = 0; + unsigned int si; /* * NOTE : direct & indirect prdt's are contigiously allocated @@ -333,13 +334,14 @@ static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc, struct prde *prd_ptr_to_indirect_ext = NULL; unsigned indirect_ext_segment_sz = 0; dma_addr_t indirect_ext_segment_paddr; + unsigned int si; VPRINTK("SATA FSL : cd = 0x%x, prd = 0x%x\n", cmd_desc, prd); indirect_ext_segment_paddr = cmd_desc_paddr + SATA_FSL_CMD_DESC_OFFSET_TO_PRDT + SATA_FSL_MAX_PRD_DIRECT * 16; - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { dma_addr_t sg_addr = sg_dma_address(sg); u32 sg_len = sg_dma_len(sg); diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 37b850ae0845..7e72463a90eb 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1136,9 +1136,10 @@ static void mv_fill_sg(struct ata_queued_cmd *qc) struct mv_port_priv *pp = qc->ap->private_data; struct scatterlist *sg; struct mv_sg *mv_sg, *last_sg = NULL; + unsigned int si; mv_sg = pp->sg_tbl; - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { dma_addr_t addr = sg_dma_address(sg); u32 sg_len = sg_dma_len(sg); diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index ed5dc7cb50cd..a0f98fdab7a0 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -1336,21 +1336,18 @@ static void nv_adma_fill_aprd(struct ata_queued_cmd *qc, static void nv_adma_fill_sg(struct ata_queued_cmd *qc, struct nv_adma_cpb *cpb) { struct nv_adma_port_priv *pp = qc->ap->private_data; - unsigned int idx; struct nv_adma_prd *aprd; struct scatterlist *sg; + unsigned int si; VPRINTK("ENTER\n"); - idx = 0; - - ata_for_each_sg(sg, qc) { - aprd = (idx < 5) ? &cpb->aprd[idx] : - &pp->aprd[NV_ADMA_SGTBL_LEN * qc->tag + (idx-5)]; - nv_adma_fill_aprd(qc, sg, idx, aprd); - idx++; + for_each_sg(qc->sg, sg, qc->n_elem, si) { + aprd = (si < 5) ? &cpb->aprd[si] : + &pp->aprd[NV_ADMA_SGTBL_LEN * qc->tag + (si-5)]; + nv_adma_fill_aprd(qc, sg, si, aprd); } - if (idx > 5) + if (si > 5) cpb->next_aprd = cpu_to_le64(((u64)(pp->aprd_dma + NV_ADMA_SGTBL_SZ * qc->tag))); else cpb->next_aprd = cpu_to_le64(0); @@ -1995,17 +1992,14 @@ static void nv_swncq_fill_sg(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct scatterlist *sg; - unsigned int idx; struct nv_swncq_port_priv *pp = ap->private_data; struct ata_prd *prd; - - WARN_ON(qc->__sg == NULL); - WARN_ON(qc->n_elem == 0 && qc->pad_len == 0); + unsigned int si, idx; prd = pp->prd + ATA_MAX_PRD * qc->tag; idx = 0; - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { u32 addr, offset; u32 sg_len, len; @@ -2027,8 +2021,7 @@ static void nv_swncq_fill_sg(struct ata_queued_cmd *qc) } } - if (idx) - prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); + prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); } static unsigned int nv_swncq_issue_atacmd(struct ata_port *ap, diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index 01738d736d44..a07d319f6e8c 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -533,17 +533,15 @@ static void pdc_fill_sg(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct scatterlist *sg; - unsigned int idx; const u32 SG_COUNT_ASIC_BUG = 41*4; + unsigned int si, idx; + u32 len; if (!(qc->flags & ATA_QCFLAG_DMAMAP)) return; - WARN_ON(qc->__sg == NULL); - WARN_ON(qc->n_elem == 0 && qc->pad_len == 0); - idx = 0; - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { u32 addr, offset; u32 sg_len, len; @@ -570,29 +568,27 @@ static void pdc_fill_sg(struct ata_queued_cmd *qc) } } - if (idx) { - u32 len = le32_to_cpu(ap->prd[idx - 1].flags_len); + len = le32_to_cpu(ap->prd[idx - 1].flags_len); - if (len > SG_COUNT_ASIC_BUG) { - u32 addr; + if (len > SG_COUNT_ASIC_BUG) { + u32 addr; - VPRINTK("Splitting last PRD.\n"); + VPRINTK("Splitting last PRD.\n"); - addr = le32_to_cpu(ap->prd[idx - 1].addr); - ap->prd[idx - 1].flags_len = cpu_to_le32(len - SG_COUNT_ASIC_BUG); - VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx - 1, addr, SG_COUNT_ASIC_BUG); + addr = le32_to_cpu(ap->prd[idx - 1].addr); + ap->prd[idx - 1].flags_len = cpu_to_le32(len - SG_COUNT_ASIC_BUG); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx - 1, addr, SG_COUNT_ASIC_BUG); - addr = addr + len - SG_COUNT_ASIC_BUG; - len = SG_COUNT_ASIC_BUG; - ap->prd[idx].addr = cpu_to_le32(addr); - ap->prd[idx].flags_len = cpu_to_le32(len); - VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len); + addr = addr + len - SG_COUNT_ASIC_BUG; + len = SG_COUNT_ASIC_BUG; + ap->prd[idx].addr = cpu_to_le32(addr); + ap->prd[idx].flags_len = cpu_to_le32(len); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len); - idx++; - } - - ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); + idx++; } + + ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); } static void pdc_qc_prep(struct ata_queued_cmd *qc) diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c index 4e5f07bdd069..91cc12c82040 100644 --- a/drivers/ata/sata_qstor.c +++ b/drivers/ata/sata_qstor.c @@ -287,14 +287,10 @@ static unsigned int qs_fill_sg(struct ata_queued_cmd *qc) struct scatterlist *sg; struct ata_port *ap = qc->ap; struct qs_port_priv *pp = ap->private_data; - unsigned int nelem; u8 *prd = pp->pkt + QS_CPB_BYTES; + unsigned int si; - WARN_ON(qc->__sg == NULL); - WARN_ON(qc->n_elem == 0 && qc->pad_len == 0); - - nelem = 0; - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { u64 addr; u32 len; @@ -306,12 +302,11 @@ static unsigned int qs_fill_sg(struct ata_queued_cmd *qc) *(__le32 *)prd = cpu_to_le32(len); prd += sizeof(u64); - VPRINTK("PRD[%u] = (0x%llX, 0x%X)\n", nelem, + VPRINTK("PRD[%u] = (0x%llX, 0x%X)\n", si, (unsigned long long)addr, len); - nelem++; } - return nelem; + return si; } static void qs_qc_prep(struct ata_queued_cmd *qc) diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index fdd3ceac329b..b4b1f91ea693 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -813,8 +813,9 @@ static inline void sil24_fill_sg(struct ata_queued_cmd *qc, { struct scatterlist *sg; struct sil24_sge *last_sge = NULL; + unsigned int si; - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { sge->addr = cpu_to_le64(sg_dma_address(sg)); sge->cnt = cpu_to_le32(sg_dma_len(sg)); sge->flags = 0; @@ -823,8 +824,7 @@ static inline void sil24_fill_sg(struct ata_queued_cmd *qc, sge++; } - if (likely(last_sge)) - last_sge->flags = cpu_to_le32(SGE_TRM); + last_sge->flags = cpu_to_le32(SGE_TRM); } static int sil24_qc_defer(struct ata_queued_cmd *qc) diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index 3de0c27caf53..211ba8da64f4 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -473,7 +473,7 @@ static void pdc20621_dma_prep(struct ata_queued_cmd *qc) void __iomem *mmio = ap->host->iomap[PDC_MMIO_BAR]; void __iomem *dimm_mmio = ap->host->iomap[PDC_DIMM_BAR]; unsigned int portno = ap->port_no; - unsigned int i, idx, total_len = 0, sgt_len; + unsigned int i, si, idx, total_len = 0, sgt_len; u32 *buf = (u32 *) &pp->dimm_buf[PDC_DIMM_HEADER_SZ]; WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP)); @@ -487,7 +487,7 @@ static void pdc20621_dma_prep(struct ata_queued_cmd *qc) * Build S/G table */ idx = 0; - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { buf[idx++] = cpu_to_le32(sg_dma_address(sg)); buf[idx++] = cpu_to_le32(sg_dma_len(sg)); total_len += sg_dma_len(sg); diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 3e78bc2d9170..aa0df0a4b22a 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -5142,6 +5142,7 @@ static void ipr_build_ata_ioadl(struct ipr_cmnd *ipr_cmd, struct ipr_ioadl_desc *last_ioadl = NULL; int len = qc->nbytes + qc->pad_len; struct scatterlist *sg; + unsigned int si; if (len == 0) return; @@ -5159,7 +5160,7 @@ static void ipr_build_ata_ioadl(struct ipr_cmnd *ipr_cmd, cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg); } - ata_for_each_sg(sg, qc) { + for_each_sg(qc->sg, sg, qc->n_elem, si) { ioadl->flags_and_data_len = cpu_to_be32(ioadl_flags | sg_dma_len(sg)); ioadl->address = cpu_to_be32(sg_dma_address(sg)); diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index f78d0605747d..827cfb132f21 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -158,8 +158,8 @@ static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc) struct Scsi_Host *host = sas_ha->core.shost; struct sas_internal *i = to_sas_internal(host->transportt); struct scatterlist *sg; - unsigned int num = 0; unsigned int xfer = 0; + unsigned int si; task = sas_alloc_task(GFP_ATOMIC); if (!task) @@ -181,17 +181,15 @@ static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc) task->total_xfer_len = qc->nbytes + qc->pad_len; task->num_scatter = qc->pad_len ? qc->n_elem + 1 : qc->n_elem; } else { - ata_for_each_sg(sg, qc) { - num++; + for_each_sg(qc->sg, sg, qc->n_elem, si) xfer += sg->length; - } task->total_xfer_len = xfer; - task->num_scatter = num; + task->num_scatter = si; } task->data_dir = qc->dma_dir; - task->scatter = qc->__sg; + task->scatter = qc->sg; task->ata_task.retry_count = 1; task->task_state_flags = SAS_TASK_STATE_PENDING; qc->lldd_task = task; diff --git a/include/linux/libata.h b/include/linux/libata.h index acd90ad78417..162f8b5509ac 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -458,7 +458,7 @@ struct ata_queued_cmd { unsigned int tag; unsigned int n_elem; unsigned int n_iter; - unsigned int orig_n_elem; + unsigned int mapped_n_elem; int dma_dir; @@ -471,11 +471,12 @@ struct ata_queued_cmd { struct scatterlist *cursg; unsigned int cursg_ofs; + struct scatterlist *last_sg; + struct scatterlist saved_last_sg; struct scatterlist sgent; - struct scatterlist pad_sgent; + struct scatterlist extra_sg[2]; - /* DO NOT iterate over __sg manually, use ata_for_each_sg() */ - struct scatterlist *__sg; + struct scatterlist *sg; unsigned int err_mask; struct ata_taskfile result_tf; @@ -1123,35 +1124,6 @@ extern void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset, const char *name); #endif -/* - * qc helpers - */ -static inline struct scatterlist * -ata_qc_first_sg(struct ata_queued_cmd *qc) -{ - qc->n_iter = 0; - if (qc->n_elem) - return qc->__sg; - if (qc->pad_len) - return &qc->pad_sgent; - return NULL; -} - -static inline struct scatterlist * -ata_qc_next_sg(struct scatterlist *sg, struct ata_queued_cmd *qc) -{ - if (sg == &qc->pad_sgent) - return NULL; - if (++qc->n_iter < qc->n_elem) - return sg_next(sg); - if (qc->pad_len) - return &qc->pad_sgent; - return NULL; -} - -#define ata_for_each_sg(sg, qc) \ - for (sg = ata_qc_first_sg(qc); sg; sg = ata_qc_next_sg(sg, qc)) - static inline unsigned int ata_tag_valid(unsigned int tag) { return (tag < ATA_MAX_QUEUE) ? 1 : 0; @@ -1386,15 +1358,17 @@ static inline void ata_tf_init(struct ata_device *dev, struct ata_taskfile *tf) static inline void ata_qc_reinit(struct ata_queued_cmd *qc) { qc->dma_dir = DMA_NONE; - qc->__sg = NULL; + qc->sg = NULL; qc->flags = 0; qc->cursg = NULL; qc->cursg_ofs = 0; qc->nbytes = qc->curbytes = 0; qc->n_elem = 0; + qc->mapped_n_elem = 0; qc->n_iter = 0; qc->err_mask = 0; qc->pad_len = 0; + qc->last_sg = NULL; qc->sect_size = ATA_SECT_SIZE; ata_tf_init(qc->dev, &qc->tf); -- cgit v1.2.3-59-g8ed1b From 0bcc65ad78ae517de16b2ca07a2891f49d44d156 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 5 Dec 2007 16:43:12 +0900 Subject: libata: make qc->nbytes include extra buffers qc->nbytes didn't use to include extra buffers setup by libata core layer and my be odd. This patch makes qc->nbytes include any extra buffers setup by libata core layer and guaranteed to be aligned on 4 byte boundary. This value is to be used to program the host controller. As this represents the actual length of buffer available to the controller and the controller must be able to deal with short transfers for ATAPI commands which can transfer variable length, this shouldn't break any controllers while making problems like rounding-down and controllers choking up on odd transfer bytes much less likely. The unmodified value is stored in new field qc->raw_nbytes. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 14 ++++++++++---- include/linux/libata.h | 3 ++- 2 files changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index e998028302da..ee72994500a3 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4763,13 +4763,15 @@ void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, } static unsigned int ata_sg_setup_extra(struct ata_queued_cmd *qc, - unsigned int *n_elem_extra) + unsigned int *n_elem_extra, + unsigned int *nbytes_extra) { struct ata_port *ap = qc->ap; unsigned int n_elem = qc->n_elem; struct scatterlist *lsg, *copy_lsg = NULL, *tsg = NULL, *esg = NULL; *n_elem_extra = 0; + *nbytes_extra = 0; /* needs padding? */ qc->pad_len = qc->nbytes & 3; @@ -4833,6 +4835,7 @@ static unsigned int ata_sg_setup_extra(struct ata_queued_cmd *qc, esg = &qc->extra_sg[1]; (*n_elem_extra)++; + (*nbytes_extra) += 4 - qc->pad_len; } if (copy_lsg) @@ -4866,11 +4869,11 @@ static unsigned int ata_sg_setup_extra(struct ata_queued_cmd *qc, static int ata_sg_setup(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; - unsigned int n_elem, n_elem_extra; + unsigned int n_elem, n_elem_extra, nbytes_extra; VPRINTK("ENTER, ata%u\n", ap->print_id); - n_elem = ata_sg_setup_extra(qc, &n_elem_extra); + n_elem = ata_sg_setup_extra(qc, &n_elem_extra, &nbytes_extra); if (n_elem) { n_elem = dma_map_sg(ap->dev, qc->sg, n_elem, qc->dma_dir); @@ -4885,7 +4888,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) qc->n_elem = qc->mapped_n_elem = n_elem; qc->n_elem += n_elem_extra; - + qc->nbytes += nbytes_extra; qc->flags |= ATA_QCFLAG_DMAMAP; return 0; @@ -5949,6 +5952,9 @@ void ata_qc_issue(struct ata_queued_cmd *qc) */ BUG_ON(ata_is_data(prot) && (!qc->sg || !qc->n_elem || !qc->nbytes)); + /* ata_sg_setup() may update nbytes */ + qc->raw_nbytes = qc->nbytes; + if (ata_is_dma(prot) || (ata_is_pio(prot) && (ap->flags & ATA_FLAG_PIO_DMA))) if (ata_sg_setup(qc)) diff --git a/include/linux/libata.h b/include/linux/libata.h index 162f8b5509ac..7b7c78e42077 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -466,6 +466,7 @@ struct ata_queued_cmd { unsigned int sect_size; unsigned int nbytes; + unsigned int raw_nbytes; unsigned int curbytes; struct scatterlist *cursg; @@ -1362,7 +1363,7 @@ static inline void ata_qc_reinit(struct ata_queued_cmd *qc) qc->flags = 0; qc->cursg = NULL; qc->cursg_ofs = 0; - qc->nbytes = qc->curbytes = 0; + qc->nbytes = qc->raw_nbytes = qc->curbytes = 0; qc->n_elem = 0; qc->mapped_n_elem = 0; qc->n_iter = 0; -- cgit v1.2.3-59-g8ed1b From a5df2eabdae7cd7840d59cffe621b3658a3a70cb Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 15 Oct 2007 20:44:11 +0100 Subject: pata_pcmcia: Add support for dumb 8bit IDE emulations Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/pata_pcmcia.c | 71 ++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 70 insertions(+), 1 deletion(-) diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index fd36099428a4..bbd4d70b92de 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -86,6 +86,44 @@ static int pcmcia_set_mode(struct ata_link *link, struct ata_device **r_failed_d return ata_do_set_mode(link, r_failed_dev); } +/** + * pcmcia_set_mode_8bit - PCMCIA specific mode setup + * @link: link + * @r_failed_dev: Return pointer for failed device + * + * For the simple emulated 8bit stuff the less we do the better. + */ + +static int pcmcia_set_mode_8bit(struct ata_link *link, + struct ata_device **r_failed_dev) +{ + return 0; +} + +/** + * ata_data_xfer_8bit - Transfer data by 8bit PIO + * @adev: device to target + * @buf: data buffer + * @buflen: buffer length + * @write_data: read/write + * + * Transfer data from/to the device data register by 8 bit PIO. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_data_xfer_8bit(struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int write_data) +{ + struct ata_port *ap = adev->link->ap; + if (write_data) + iowrite8_rep(ap->ioaddr.data_addr, buf, buflen); + else + ioread8_rep(ap->ioaddr.data_addr, buf, buflen); +} + + static struct scsi_host_template pcmcia_sht = { .module = THIS_MODULE, .name = DRV_NAME, @@ -129,12 +167,38 @@ static struct ata_port_operations pcmcia_port_ops = { .port_start = ata_sff_port_start, }; +static struct ata_port_operations pcmcia_8bit_port_ops = { + .set_mode = pcmcia_set_mode_8bit, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_40wire, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + + .data_xfer = ata_data_xfer_8bit, + + .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + + .port_start = ata_sff_port_start, +}; + #define CS_CHECK(fn, ret) \ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) /** * pcmcia_init_one - attach a PCMCIA interface * @pdev: pcmcia device + * @ops: operations for this device * * Register a PCMCIA IDE interface. Such interfaces are PIO 0 and * shared IRQ. @@ -157,6 +221,8 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) unsigned long io_base, ctl_base; void __iomem *io_addr, *ctl_addr; + struct ata_port_operations *ops = &pcmcia_port_ops; + info = kzalloc(sizeof(*info), GFP_KERNEL); if (info == NULL) return -ENOMEM; @@ -284,6 +350,8 @@ next_entry: if (pdev->io.NumPorts1 >= 0x20) printk(KERN_WARNING DRV_NAME ": second channel not yet supported.\n"); + if (pdev->manf_id == 0x0097 && pdev->card_id == 0x1620) + ops = &pcmcia_8bit_port_ops; /* * Having done the PCMCIA plumbing the ATA side is relatively * sane. @@ -294,7 +362,7 @@ next_entry: goto failed; ap = host->ports[0]; - ap->ops = &pcmcia_port_ops; + ap->ops = ops; ap->pio_mask = 1; /* ISA so PIO 0 cycles */ ap->flags |= ATA_FLAG_SLAVE_POSS; ap->ioaddr.cmd_addr = io_addr; @@ -360,6 +428,7 @@ static struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704), PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904), PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */ + PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), /* TI emulated */ PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */ PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d), PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */ -- cgit v1.2.3-59-g8ed1b From c5038fc05d4aa4ae0671776199459690e4c973cb Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 25 Oct 2007 14:21:16 +0100 Subject: libata/pata_it821x: Improve handling of poorly compatible emulations Some it821x RAID firmwares return 0 for the err return off both devices. A similar issue occurs with the slave returning 0 not 1 if you plug a gigabyte sata ramdisk into a controller that fakes two SATA ports as master/slave on an SFF channel. The patch does the following - Allow the 'failed diagnostics' case on both master and slave - Move the HORKAGE_DIAGNOSTIC check after ->dev_config This second change also allows IT821x to fix up a problem where we report drive diagnostic failures when in fact the drive is fine but the microcontroller firmware doesn't appear to get it right. IT821x clears the flag again to avoid giving the user bogus warnings about their disk. The other IT821x change is a bit ugly, we slightly abuse the cable type hook to fiddle with the identify data for the devices. We could add a new hook for this but as we have only one offender and no more seeming likely it seems better to keep libata-core clean. Please let this sit in -mm briefly, just in case the relaxed checking breaks some other emulated interface. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 36 ++++++++++++++++++++---------------- drivers/ata/pata_it821x.c | 35 +++++++++++++++++++++++++++++++++-- 2 files changed, 53 insertions(+), 18 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index ee72994500a3..627703cba9a6 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -950,8 +950,8 @@ unsigned int ata_dev_try_classify(struct ata_device *dev, int present, if (r_err) *r_err = err; - /* see if device passed diags: if master then continue and warn later */ - if (err == 0 && dev->devno == 0) + /* see if device passed diags: continue and warn later */ + if (err == 0) /* diagnostic fail : do nothing _YET_ */ dev->horkage |= ATA_HORKAGE_DIAGNOSTIC; else if (err == 1) @@ -2262,19 +2262,8 @@ int ata_dev_configure(struct ata_device *dev) dev->flags |= ATA_DFLAG_DIPM; } - if (dev->horkage & ATA_HORKAGE_DIAGNOSTIC) { - /* Let the user know. We don't want to disallow opens for - rescue purposes, or in case the vendor is just a blithering - idiot */ - if (print_info) { - ata_dev_printk(dev, KERN_WARNING, -"Drive reports diagnostics failure. This may indicate a drive\n"); - ata_dev_printk(dev, KERN_WARNING, -"fault or invalid emulation. Contact drive vendor for information.\n"); - } - } - - /* limit bridge transfers to udma5, 200 sectors */ + /* Limit PATA drive on SATA cable bridge transfers to udma5, + 200 sectors */ if (ata_dev_knobble(dev)) { if (ata_msg_drv(ap) && print_info) ata_dev_printk(dev, KERN_INFO, @@ -2303,6 +2292,21 @@ int ata_dev_configure(struct ata_device *dev) if (ap->ops->dev_config) ap->ops->dev_config(dev); + if (dev->horkage & ATA_HORKAGE_DIAGNOSTIC) { + /* Let the user know. We don't want to disallow opens for + rescue purposes, or in case the vendor is just a blithering + idiot. Do this after the dev_config call as some controllers + with buggy firmware may want to avoid reporting false device + bugs */ + + if (print_info) { + ata_dev_printk(dev, KERN_WARNING, +"Drive reports diagnostics failure. This may indicate a drive\n"); + ata_dev_printk(dev, KERN_WARNING, +"fault or invalid emulation. Contact drive vendor for information.\n"); + } + } + if (ata_msg_probe(ap)) ata_dev_printk(dev, KERN_DEBUG, "%s: EXIT, drv_stat = 0x%x\n", __FUNCTION__, ata_chk_status(ap)); @@ -3066,7 +3070,7 @@ static int ata_dev_set_mode(struct ata_device *dev) /* Early MWDMA devices do DMA but don't allow DMA mode setting. Don't fail an MWDMA0 set IFF the device indicates it is in MWDMA0 */ - if (dev->xfer_shift == ATA_SHIFT_MWDMA && + if (dev->xfer_shift == ATA_SHIFT_MWDMA && dev->dma_mode == XFER_MW_DMA_0 && (dev->id[63] >> 8) & 1) err_mask &= ~AC_ERR_DEV; diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index ca9aae09daed..109ddd42c266 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -430,7 +430,7 @@ static unsigned int it821x_smart_qc_issue_prot(struct ata_queued_cmd *qc) return ata_qc_issue_prot(qc); } printk(KERN_DEBUG "it821x: can't process command 0x%02X\n", qc->tf.command); - return AC_ERR_INVALID; + return AC_ERR_DEV; } /** @@ -516,6 +516,37 @@ static void it821x_dev_config(struct ata_device *adev) printk("(%dK stripe)", adev->id[146]); printk(".\n"); } + /* This is a controller firmware triggered funny, don't + report the drive faulty! */ + adev->horkage &= ~ATA_HORKAGE_DIAGNOSTIC; +} + +/** + * it821x_ident_hack - Hack identify data up + * @ap: Port + * + * Walk the devices on this firmware driven port and slightly + * mash the identify data to stop us and common tools trying to + * use features not firmware supported. The firmware itself does + * some masking (eg SMART) but not enough. + * + * This is a bit of an abuse of the cable method, but it is the + * only method called at the right time. We could modify the libata + * core specifically for ident hacking but while we have one offender + * it seems better to keep the fallout localised. + */ + +static int it821x_ident_hack(struct ata_port *ap) +{ + struct ata_device *adev; + ata_link_for_each_dev(adev, &ap->link) { + if (ata_dev_enabled(adev)) { + adev->id[84] &= ~(1 << 6); /* No FUA */ + adev->id[85] &= ~(1 << 10); /* No HPA */ + adev->id[76] = 0; /* No NCQ/AN etc */ + } + } + return ata_cable_unknown(ap); } @@ -634,7 +665,7 @@ static struct ata_port_operations it821x_smart_port_ops = { .thaw = ata_bmdma_thaw, .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, - .cable_detect = ata_cable_unknown, + .cable_detect = it821x_ident_hack, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, -- cgit v1.2.3-59-g8ed1b From d7b174500e5750099537c7f0bc4873f06b6c1b9a Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 Nov 2007 14:43:07 +0000 Subject: pata_pcmcia: Minor cleanups and support for dual channel cards Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/pata_pcmcia.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-) diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index bbd4d70b92de..ceba93b7754e 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -42,7 +42,7 @@ #define DRV_NAME "pata_pcmcia" -#define DRV_VERSION "0.3.2" +#define DRV_VERSION "0.3.3" /* * Private data structure to glue stuff together @@ -198,7 +198,6 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) /** * pcmcia_init_one - attach a PCMCIA interface * @pdev: pcmcia device - * @ops: operations for this device * * Register a PCMCIA IDE interface. Such interfaces are PIO 0 and * shared IRQ. @@ -217,9 +216,10 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) cistpl_cftable_entry_t dflt; } *stk = NULL; cistpl_cftable_entry_t *cfg; - int pass, last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM; + int pass, last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM, p; unsigned long io_base, ctl_base; void __iomem *io_addr, *ctl_addr; + int n_ports = 1; struct ata_port_operations *ops = &pcmcia_port_ops; @@ -348,7 +348,7 @@ next_entry: /* FIXME: Could be more ports at base + 0x10 but we only deal with one right now */ if (pdev->io.NumPorts1 >= 0x20) - printk(KERN_WARNING DRV_NAME ": second channel not yet supported.\n"); + n_ports = 2; if (pdev->manf_id == 0x0097 && pdev->card_id == 0x1620) ops = &pcmcia_8bit_port_ops; @@ -357,20 +357,23 @@ next_entry: * sane. */ ret = -ENOMEM; - host = ata_host_alloc(&pdev->dev, 1); + host = ata_host_alloc(&pdev->dev, n_ports); if (!host) goto failed; - ap = host->ports[0]; - ap->ops = ops; - ap->pio_mask = 1; /* ISA so PIO 0 cycles */ - ap->flags |= ATA_FLAG_SLAVE_POSS; - ap->ioaddr.cmd_addr = io_addr; - ap->ioaddr.altstatus_addr = ctl_addr; - ap->ioaddr.ctl_addr = ctl_addr; - ata_std_ports(&ap->ioaddr); + for (p = 0; p < n_ports; p++) { + ap = host->ports[p]; - ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base); + ap->ops = ops; + ap->pio_mask = 1; /* ISA so PIO 0 cycles */ + ap->flags |= ATA_FLAG_SLAVE_POSS; + ap->ioaddr.cmd_addr = io_addr + 0x10 * p; + ap->ioaddr.altstatus_addr = ctl_addr + 0x10 * p; + ap->ioaddr.ctl_addr = ctl_addr + 0x10 * p; + ata_std_ports(&ap->ioaddr); + + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base); + } /* activate */ ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_interrupt, -- cgit v1.2.3-59-g8ed1b From 442eacc362c2576aac8ebfd41b99252e28e0f49c Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 19 Dec 2007 04:25:10 -0500 Subject: libata: make ata_port_queue_task() an internal function ata_port_queue_task() served a single user: ata_pio_task() Rename to ata_pio_queue_task() and un-export it, as nobody outside of libata-core.c uses it. Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 24 +++++++++++------------- include/linux/libata.h | 2 -- 2 files changed, 11 insertions(+), 15 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 627703cba9a6..4020a1d3eb2c 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1480,7 +1480,7 @@ unsigned long ata_id_xfermask(const u16 *id) } /** - * ata_port_queue_task - Queue port_task + * ata_pio_queue_task - Queue port_task * @ap: The ata_port to queue port_task for * @fn: workqueue function to be scheduled * @data: data for @fn to use @@ -1492,16 +1492,15 @@ unsigned long ata_id_xfermask(const u16 *id) * one task is active at any given time. * * libata core layer takes care of synchronization between - * port_task and EH. ata_port_queue_task() may be ignored for EH + * port_task and EH. ata_pio_queue_task() may be ignored for EH * synchronization. * * LOCKING: * Inherited from caller. */ -void ata_port_queue_task(struct ata_port *ap, work_func_t fn, void *data, - unsigned long delay) +static void ata_pio_queue_task(struct ata_port *ap, void *data, + unsigned long delay) { - PREPARE_DELAYED_WORK(&ap->port_task, fn); ap->port_task_data = data; /* may fail if ata_port_flush_task() in progress */ @@ -5618,7 +5617,7 @@ fsm_start: msleep(2); status = ata_busy_wait(ap, ATA_BUSY, 10); if (status & ATA_BUSY) { - ata_port_queue_task(ap, ata_pio_task, qc, ATA_SHORT_PAUSE); + ata_pio_queue_task(ap, qc, ATA_SHORT_PAUSE); return; } } @@ -6041,7 +6040,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) ap->hsm_task_state = HSM_ST_LAST; if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_port_queue_task(ap, ata_pio_task, qc, 0); + ata_pio_queue_task(ap, qc, 0); break; @@ -6063,7 +6062,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) if (qc->tf.flags & ATA_TFLAG_WRITE) { /* PIO data out protocol */ ap->hsm_task_state = HSM_ST_FIRST; - ata_port_queue_task(ap, ata_pio_task, qc, 0); + ata_pio_queue_task(ap, qc, 0); /* always send first data block using * the ata_pio_task() codepath. @@ -6073,7 +6072,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) ap->hsm_task_state = HSM_ST; if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_port_queue_task(ap, ata_pio_task, qc, 0); + ata_pio_queue_task(ap, qc, 0); /* if polling, ata_pio_task() handles the rest. * otherwise, interrupt handler takes over from here. @@ -6094,7 +6093,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) /* send cdb by polling if no cdb interrupt */ if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) || (qc->tf.flags & ATA_TFLAG_POLLING)) - ata_port_queue_task(ap, ata_pio_task, qc, 0); + ata_pio_queue_task(ap, qc, 0); break; case ATAPI_PROT_DMA: @@ -6106,7 +6105,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) /* send cdb by polling if no cdb interrupt */ if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) - ata_port_queue_task(ap, ata_pio_task, qc, 0); + ata_pio_queue_task(ap, qc, 0); break; default: @@ -6722,7 +6721,7 @@ struct ata_port *ata_port_alloc(struct ata_host *host) ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN; #endif - INIT_DELAYED_WORK(&ap->port_task, NULL); + INIT_DELAYED_WORK(&ap->port_task, ata_pio_task); INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug); INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan); INIT_LIST_HEAD(&ap->eh_done_q); @@ -7599,7 +7598,6 @@ EXPORT_SYMBOL_GPL(ata_wait_register); EXPORT_SYMBOL_GPL(ata_busy_sleep); EXPORT_SYMBOL_GPL(ata_wait_after_reset); EXPORT_SYMBOL_GPL(ata_wait_ready); -EXPORT_SYMBOL_GPL(ata_port_queue_task); EXPORT_SYMBOL_GPL(ata_scsi_ioctl); EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); EXPORT_SYMBOL_GPL(ata_scsi_slave_config); diff --git a/include/linux/libata.h b/include/linux/libata.h index 7b7c78e42077..ccb055636f37 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -847,8 +847,6 @@ extern int ata_busy_sleep(struct ata_port *ap, unsigned long timeout_pat, unsigned long timeout); extern void ata_wait_after_reset(struct ata_port *ap, unsigned long deadline); extern int ata_wait_ready(struct ata_port *ap, unsigned long deadline); -extern void ata_port_queue_task(struct ata_port *ap, work_func_t fn, - void *data, unsigned long delay); extern u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, unsigned long interval_msec, unsigned long timeout_msec); -- cgit v1.2.3-59-g8ed1b From 723159c58371b860cf6ef38affd19d16290e4898 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 4 Jan 2008 18:42:20 +0900 Subject: ata_piix: kill unused constants and flags Kill PIIX_FLAG_SCR, PIIX_PORT_ENABLED and PIIX_PORT_PRESENT. These are unused. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 27 +++++++-------------------- 1 file changed, 7 insertions(+), 20 deletions(-) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 2db635817edf..3183b3f38e49 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -102,19 +102,12 @@ enum { ICH5_PCS = 0x92, /* port control and status */ PIIX_SCC = 0x0A, /* sub-class code register */ - PIIX_FLAG_SCR = (1 << 26), /* SCR available */ PIIX_FLAG_AHCI = (1 << 27), /* AHCI possible */ PIIX_FLAG_CHECKINTR = (1 << 28), /* make sure PCI INTx enabled */ PIIX_PATA_FLAGS = ATA_FLAG_SLAVE_POSS, PIIX_SATA_FLAGS = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR, - /* combined mode. if set, PATA is channel 0. - * if clear, PATA is channel 1. - */ - PIIX_PORT_ENABLED = (1 << 0), - PIIX_PORT_PRESENT = (1 << 4), - PIIX_80C_PRI = (1 << 5) | (1 << 4), PIIX_80C_SEC = (1 << 7) | (1 << 6), @@ -588,7 +581,7 @@ static struct ata_port_info piix_port_info[] = { [ich6_sata] = { .sht = &piix_sht, - .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR, + .flags = PIIX_SATA_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = ATA_UDMA6, @@ -598,8 +591,7 @@ static struct ata_port_info piix_port_info[] = { [ich6_sata_ahci] = { .sht = &piix_sht, - .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR | - PIIX_FLAG_AHCI, + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = ATA_UDMA6, @@ -609,8 +601,7 @@ static struct ata_port_info piix_port_info[] = { [ich6m_sata_ahci] = { .sht = &piix_sht, - .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR | - PIIX_FLAG_AHCI, + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = ATA_UDMA6, @@ -620,8 +611,7 @@ static struct ata_port_info piix_port_info[] = { [ich8_sata_ahci] = { .sht = &piix_sht, - .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR | - PIIX_FLAG_AHCI, + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = ATA_UDMA6, @@ -631,8 +621,7 @@ static struct ata_port_info piix_port_info[] = { [ich8_2port_sata] = { .sht = &piix_sht, - .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR | - PIIX_FLAG_AHCI, + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = ATA_UDMA6, @@ -642,8 +631,7 @@ static struct ata_port_info piix_port_info[] = { [tolapai_sata_ahci] = { .sht = &piix_sht, - .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR | - PIIX_FLAG_AHCI, + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = ATA_UDMA6, @@ -653,8 +641,7 @@ static struct ata_port_info piix_port_info[] = { [ich8m_apple_sata_ahci] = { .sht = &piix_sht, - .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR | - PIIX_FLAG_AHCI, + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = ATA_UDMA6, -- cgit v1.2.3-59-g8ed1b From 35a10a80daa04b7316d6bac1b1402cc347c35b1e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 4 Jan 2008 18:42:21 +0900 Subject: libata: use dev_driver_string() instead of "libata" in libata-sff.c libata-sff code used DRV_NAME which is hardcoded to "libata" when requesting resources. Use dev_driver_string() such that low level driver names are used in resource listing. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-sff.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index edeb4bea586c..97dd8f2796b7 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -551,7 +551,7 @@ int ata_pci_init_bmdma(struct ata_host *host) return rc; /* request and iomap DMA region */ - rc = pcim_iomap_regions(pdev, 1 << 4, DRV_NAME); + rc = pcim_iomap_regions(pdev, 1 << 4, dev_driver_string(gdev)); if (rc) { dev_printk(KERN_ERR, gdev, "failed to request/iomap BAR4\n"); return -ENOMEM; @@ -621,7 +621,8 @@ int ata_pci_init_sff_host(struct ata_host *host) continue; } - rc = pcim_iomap_regions(pdev, 0x3 << base, DRV_NAME); + rc = pcim_iomap_regions(pdev, 0x3 << base, + dev_driver_string(gdev)); if (rc) { dev_printk(KERN_WARNING, gdev, "failed to request/iomap BARs for port %d " @@ -741,6 +742,7 @@ int ata_pci_init_one(struct pci_dev *pdev, struct device *dev = &pdev->dev; const struct ata_port_info *pi = NULL; struct ata_host *host = NULL; + const char *drv_name = dev_driver_string(&pdev->dev); u8 mask; int legacy_mode = 0; int i, rc; @@ -813,7 +815,7 @@ int ata_pci_init_one(struct pci_dev *pdev, shouldn't happen on a sane system but robustness is cheap in this case */ rc = devm_request_irq(dev, pdev->irq, pi->port_ops->irq_handler, - IRQF_SHARED, DRV_NAME, host); + IRQF_SHARED, drv_name, host); if (rc) goto err_out; @@ -823,7 +825,7 @@ int ata_pci_init_one(struct pci_dev *pdev, if (!ata_port_is_dummy(host->ports[0])) { rc = devm_request_irq(dev, ATA_PRIMARY_IRQ(pdev), pi->port_ops->irq_handler, - IRQF_SHARED, DRV_NAME, host); + IRQF_SHARED, drv_name, host); if (rc) goto err_out; @@ -834,7 +836,7 @@ int ata_pci_init_one(struct pci_dev *pdev, if (!ata_port_is_dummy(host->ports[1])) { rc = devm_request_irq(dev, ATA_SECONDARY_IRQ(pdev), pi->port_ops->irq_handler, - IRQF_SHARED, DRV_NAME, host); + IRQF_SHARED, drv_name, host); if (rc) goto err_out; -- cgit v1.2.3-59-g8ed1b From 4ca4e439640cd1d3659cbcf60e7a73c2ae0450b3 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 30 Dec 2007 09:32:22 +0000 Subject: libata annotations and fixes Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 18 +++++++++--------- drivers/ata/libata-core.c | 2 +- drivers/ata/libata-scsi.c | 4 ++-- drivers/ata/pata_cs5520.c | 2 +- drivers/ata/pata_pdc2027x.c | 2 +- drivers/ata/sata_promise.h | 2 +- drivers/ata/sata_sx4.c | 9 +++++---- include/linux/ata.h | 4 ++-- 8 files changed, 22 insertions(+), 21 deletions(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index cffad07c65bf..49761bc12cf2 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -198,18 +198,18 @@ enum { }; struct ahci_cmd_hdr { - u32 opts; - u32 status; - u32 tbl_addr; - u32 tbl_addr_hi; - u32 reserved[4]; + __le32 opts; + __le32 status; + __le32 tbl_addr; + __le32 tbl_addr_hi; + __le32 reserved[4]; }; struct ahci_sg { - u32 addr; - u32 addr_hi; - u32 reserved; - u32 flags_size; + __le32 addr; + __le32 addr_hi; + __le32 reserved; + __le32 flags_size; }; struct ahci_host_priv { diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 4020a1d3eb2c..8c82193b077e 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4949,7 +4949,7 @@ unsigned int ata_data_xfer(struct ata_device *dev, unsigned char *buf, /* Transfer trailing 1 byte, if any. */ if (unlikely(buflen & 0x01)) { - u16 align_buf[1] = { 0 }; + __le16 align_buf[1] = { 0 }; unsigned char *trailing_buf = buf + buflen - 1; if (rw == READ) { diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 42bf61599730..15a4c8a20358 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2210,7 +2210,7 @@ unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf, /* sector size */ ATA_SCSI_RBUF_SET(6, ATA_SECT_SIZE >> 8); - ATA_SCSI_RBUF_SET(7, ATA_SECT_SIZE); + ATA_SCSI_RBUF_SET(7, ATA_SECT_SIZE & 0xff); } else { /* sector count, 64-bit */ ATA_SCSI_RBUF_SET(0, last_lba >> (8 * 7)); @@ -2224,7 +2224,7 @@ unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf, /* sector size */ ATA_SCSI_RBUF_SET(10, ATA_SECT_SIZE >> 8); - ATA_SCSI_RBUF_SET(11, ATA_SECT_SIZE); + ATA_SCSI_RBUF_SET(11, ATA_SECT_SIZE & 0xff); } return 0; diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c index 33f7f0843f4f..d4590f546c49 100644 --- a/drivers/ata/pata_cs5520.c +++ b/drivers/ata/pata_cs5520.c @@ -198,7 +198,7 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi }; const struct ata_port_info *ppi[2]; u8 pcicfg; - void *iomap[5]; + void __iomem *iomap[5]; struct ata_host *host; struct ata_ioports *ioaddr; int i, rc; diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c index 2622577521a1..028af5dbeed6 100644 --- a/drivers/ata/pata_pdc2027x.c +++ b/drivers/ata/pata_pdc2027x.c @@ -348,7 +348,7 @@ static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long ata_id_c_string(pair->id, model_num, ATA_ID_PROD, ATA_ID_PROD_LEN + 1); /* If the master is a maxtor in UDMA6 then the slave should not use UDMA 6 */ - if (strstr(model_num, "Maxtor") == 0 && pair->dma_mode == XFER_UDMA_6) + if (strstr(model_num, "Maxtor") == NULL && pair->dma_mode == XFER_UDMA_6) mask &= ~ (1 << (6 + ATA_SHIFT_UDMA)); return ata_pci_default_filter(adev, mask); diff --git a/drivers/ata/sata_promise.h b/drivers/ata/sata_promise.h index 6ee5e190262d..00d6000e546f 100644 --- a/drivers/ata/sata_promise.h +++ b/drivers/ata/sata_promise.h @@ -46,7 +46,7 @@ static inline unsigned int pdc_pkt_header(struct ata_taskfile *tf, unsigned int devno, u8 *buf) { u8 dev_reg; - u32 *buf32 = (u32 *) buf; + __le32 *buf32 = (__le32 *) buf; /* set control bits (byte 0), zero delay seq id (byte 3), * and seq id (byte 2) diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index 211ba8da64f4..e3d56bc6726d 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -334,7 +334,7 @@ static inline void pdc20621_ata_sg(struct ata_taskfile *tf, u8 *buf, { u32 addr; unsigned int dw = PDC_DIMM_APKT_PRD >> 2; - u32 *buf32 = (u32 *) buf; + __le32 *buf32 = (__le32 *) buf; /* output ATA packet S/G table */ addr = PDC_20621_DIMM_BASE + PDC_20621_DIMM_DATA + @@ -356,7 +356,7 @@ static inline void pdc20621_host_sg(struct ata_taskfile *tf, u8 *buf, { u32 addr; unsigned int dw = PDC_DIMM_HPKT_PRD >> 2; - u32 *buf32 = (u32 *) buf; + __le32 *buf32 = (__le32 *) buf; /* output Host DMA packet S/G table */ addr = PDC_20621_DIMM_BASE + PDC_20621_DIMM_DATA + @@ -377,7 +377,7 @@ static inline unsigned int pdc20621_ata_pkt(struct ata_taskfile *tf, unsigned int portno) { unsigned int i, dw; - u32 *buf32 = (u32 *) buf; + __le32 *buf32 = (__le32 *) buf; u8 dev_reg; unsigned int dimm_sg = PDC_20621_DIMM_BASE + @@ -429,7 +429,8 @@ static inline void pdc20621_host_pkt(struct ata_taskfile *tf, u8 *buf, unsigned int portno) { unsigned int dw; - u32 tmp, *buf32 = (u32 *) buf; + u32 tmp; + __le32 *buf32 = (__le32 *) buf; unsigned int host_sg = PDC_20621_DIMM_BASE + (PDC_DIMM_WINDOW_STEP * portno) + diff --git a/include/linux/ata.h b/include/linux/ata.h index bc55471a4b2c..78bbacaed8c4 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -354,8 +354,8 @@ enum ata_ioctls { /* core structures */ struct ata_prd { - u32 addr; - u32 flags_len; + __le32 addr; + __le32 flags_len; }; struct ata_taskfile { -- cgit v1.2.3-59-g8ed1b From f885521f0aa4a4f9d339cf32a4821a56f3f97426 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 2 Jan 2008 20:12:47 +0900 Subject: pata_pcmcia: convert to new data_xfer prototype While merging data_xfer prototype change, pata_pcmcia was left out. Convert it. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/pata_pcmcia.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index ceba93b7754e..3e7f6a9da28b 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -102,10 +102,10 @@ static int pcmcia_set_mode_8bit(struct ata_link *link, /** * ata_data_xfer_8bit - Transfer data by 8bit PIO - * @adev: device to target + * @dev: device to target * @buf: data buffer * @buflen: buffer length - * @write_data: read/write + * @rw: read/write * * Transfer data from/to the device data register by 8 bit PIO. * @@ -113,14 +113,17 @@ static int pcmcia_set_mode_8bit(struct ata_link *link, * Inherited from caller. */ -static void ata_data_xfer_8bit(struct ata_device *adev, unsigned char *buf, - unsigned int buflen, int write_data) +static unsigned int ata_data_xfer_8bit(struct ata_device *dev, + unsigned char *buf, unsigned int buflen, int rw) { - struct ata_port *ap = adev->link->ap; - if (write_data) - iowrite8_rep(ap->ioaddr.data_addr, buf, buflen); - else + struct ata_port *ap = dev->link->ap; + + if (rw == READ) ioread8_rep(ap->ioaddr.data_addr, buf, buflen); + else + iowrite8_rep(ap->ioaddr.data_addr, buf, buflen); + + return buflen; } -- cgit v1.2.3-59-g8ed1b From 045eeb4f796bf50439cfbf4f165946b648a1a928 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 10 Jan 2008 14:33:04 -0800 Subject: [libata] pata_winbond: update for new ->data_xfer hook drivers/spi/Kconfig:156:warning: 'select' used by config symbol 'SPI_PXA2XX' refers to undefined symbol 'PXA_SSP' drivers/ata/pata_winbond.c: In function 'winbond_data_xfer': drivers/ata/pata_winbond.c:109: error: 'read' undeclared (first use in this function) drivers/ata/pata_winbond.c:109: error: (Each undeclared identifier is reported only once drivers/ata/pata_winbond.c:109: error: for each function it appears in.) drivers/ata/pata_winbond.c:123: warning: 'return' with a value, in function returning void drivers/ata/pata_winbond.c: At top level: drivers/ata/pata_winbond.c:162: warning: initialization from incompatible pointer type distcc[29718] ERROR: compile drivers/ata/pata_winbond.c on bix/8 failed make[1]: *** [drivers/ata/pata_winbond.o] Error 1 make: *** [drivers/ata/pata_winbond.o] Error 2 Cc: Jeff Garzik Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/ata/pata_winbond.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c index 7312e9182d69..17a9d0713232 100644 --- a/drivers/ata/pata_winbond.c +++ b/drivers/ata/pata_winbond.c @@ -92,8 +92,8 @@ static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev) } -static void winbond_data_xfer(struct ata_device *dev, unsigned char *buf, - unsigned int buflen, int rw) +static unsigned int winbond_data_xfer(struct ata_device *dev, + unsigned char *buf, unsigned int buflen, int rw) { struct ata_port *ap = dev->link->ap; int slop = buflen & 3; -- cgit v1.2.3-59-g8ed1b From c294f1b32940d5bf853e006b9ccc72629c859749 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 15 Jan 2008 15:42:37 -0800 Subject: [libata] pata_legacy: typo fix Cc: Jeff Garzik Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/ata/pata_legacy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index dae85aa12e32..c37ba324e71c 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -252,7 +252,7 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev) static unsigned int pdc_data_xfer_vlb(struct ata_device *dev, unsigned char *buf, unsigned int buflen, int rw) { - if (ata_id_has_dword_io(adev->id)) { + if (ata_id_has_dword_io(dev->id)) { struct ata_port *ap = dev->link->ap; int slop = buflen & 3; unsigned long flags; -- cgit v1.2.3-59-g8ed1b From defc9cd826e4a99f550504a744f9407b518828ae Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 10 Jan 2008 14:33:10 -0800 Subject: pata_legacy: resychronize with upstream changes and resubmit Update the legacy driver so it can handle VLB ports nicely, and has an internal structure for nailing new ISA/VLB forms in. Anyone got an ALI14xx and a spare day ;) Also adds an "all" parameter so you can load this driver after all the PCI ones in a boot time kernel and tell it to grab anything ST412 compatible even if it is an unknown PCI device. That allows libata to offer the same "just get me a disk somehow" fallback that old IDE did. Obsoletes pata_qdi. Signed-off-by: Alan Cox Cc: Tejun Heo Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/ata/pata_legacy.c | 750 +++++++++++++++++++++++++++++++++++++--------- 1 file changed, 605 insertions(+), 145 deletions(-) diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index c37ba324e71c..c4a939b506c9 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -68,8 +68,9 @@ #define NR_HOST 6 -static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 }; -static int legacy_irq[NR_HOST] = { 14, 15, 11, 10, 8, 12 }; +static int all; +module_param(all, int, 0444); +MODULE_PARM_DESC(all, "Grab all legacy port devices, even if PCI(0=off, 1=on)"); struct legacy_data { unsigned long timing; @@ -80,20 +81,102 @@ struct legacy_data { }; +enum controller { + BIOS = 0, + SNOOP = 1, + PDC20230 = 2, + HT6560A = 3, + HT6560B = 4, + OPTI611A = 5, + OPTI46X = 6, + QDI6500 = 7, + QDI6580 = 8, + QDI6580DP = 9, /* Dual channel mode is different */ + + UNKNOWN = -1 +}; + + +struct legacy_probe { + unsigned char *name; + unsigned long port; + unsigned int irq; + unsigned int slot; + enum controller type; + unsigned long private; +}; + +struct legacy_controller { + const char *name; + struct ata_port_operations *ops; + unsigned int pio_mask; + unsigned int flags; + int (*setup)(struct legacy_probe *probe, struct legacy_data *data); +}; + +static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 }; + +static struct legacy_probe probe_list[NR_HOST]; static struct legacy_data legacy_data[NR_HOST]; static struct ata_host *legacy_host[NR_HOST]; static int nr_legacy_host; -static int probe_all; /* Set to check all ISA port ranges */ -static int ht6560a; /* HT 6560A on primary 1, secondary 2, both 3 */ -static int ht6560b; /* HT 6560A on primary 1, secondary 2, both 3 */ -static int opti82c611a; /* Opti82c611A on primary 1, secondary 2, both 3 */ -static int opti82c46x; /* Opti 82c465MV present (pri/sec autodetect) */ -static int autospeed; /* Chip present which snoops speed changes */ -static int pio_mask = 0x1F; /* PIO range for autospeed devices */ +static int probe_all; /* Set to check all ISA port ranges */ +static int ht6560a; /* HT 6560A on primary 1, second 2, both 3 */ +static int ht6560b; /* HT 6560A on primary 1, second 2, both 3 */ +static int opti82c611a; /* Opti82c611A on primary 1, sec 2, both 3 */ +static int opti82c46x; /* Opti 82c465MV present(pri/sec autodetect) */ +static int qdi; /* Set to probe QDI controllers */ +static int autospeed; /* Chip present which snoops speed changes */ +static int pio_mask = 0x1F; /* PIO range for autospeed devices */ static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */ +/** + * legacy_probe_add - Add interface to probe list + * @port: Controller port + * @irq: IRQ number + * @type: Controller type + * @private: Controller specific info + * + * Add an entry into the probe list for ATA controllers. This is used + * to add the default ISA slots and then to build up the table + * further according to other ISA/VLB/Weird device scans + * + * An I/O port list is used to keep ordering stable and sane, as we + * don't have any good way to talk about ordering otherwise + */ + +static int legacy_probe_add(unsigned long port, unsigned int irq, + enum controller type, unsigned long private) +{ + struct legacy_probe *lp = &probe_list[0]; + int i; + struct legacy_probe *free = NULL; + + for (i = 0; i < NR_HOST; i++) { + if (lp->port == 0 && free == NULL) + free = lp; + /* Matching port, or the correct slot for ordering */ + if (lp->port == port || legacy_port[i] == port) { + free = lp; + break; + } + lp++; + } + if (free == NULL) { + printk(KERN_ERR "pata_legacy: Too many interfaces.\n"); + return -1; + } + /* Fill in the entry for later probing */ + free->port = port; + free->irq = irq; + free->type = type; + free->private = private; + return 0; +} + + /** * legacy_set_mode - mode setting * @link: IDE link @@ -113,7 +196,8 @@ static int legacy_set_mode(struct ata_link *link, struct ata_device **unused) ata_link_for_each_dev(dev, link) { if (ata_dev_enabled(dev)) { - ata_dev_printk(dev, KERN_INFO, "configured for PIO\n"); + ata_dev_printk(dev, KERN_INFO, + "configured for PIO\n"); dev->pio_mode = XFER_PIO_0; dev->xfer_mode = XFER_PIO_0; dev->xfer_shift = ATA_SHIFT_PIO; @@ -171,7 +255,7 @@ static struct ata_port_operations simple_port_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static struct ata_port_operations legacy_port_ops = { @@ -198,15 +282,16 @@ static struct ata_port_operations legacy_port_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /* * Promise 20230C and 20620 support * - * This controller supports PIO0 to PIO2. We set PIO timings conservatively to - * allow for 50MHz Vesa Local Bus. The 20620 DMA support is weird being DMA to - * controller and PIO'd to the host and not supported. + * This controller supports PIO0 to PIO2. We set PIO timings + * conservatively to allow for 50MHz Vesa Local Bus. The 20620 DMA + * support is weird being DMA to controller and PIO'd to the host + * and not supported. */ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev) @@ -221,8 +306,7 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev) local_irq_save(flags); /* Unlock the control interface */ - do - { + do { inb(0x1F5); outb(inb(0x1F2) | 0x80, 0x1F2); inb(0x1F2); @@ -231,7 +315,7 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev) inb(0x1F2); inb(0x1F2); } - while((inb(0x1F2) & 0x80) && --tries); + while ((inb(0x1F2) & 0x80) && --tries); local_irq_restore(flags); @@ -250,7 +334,7 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev) } static unsigned int pdc_data_xfer_vlb(struct ata_device *dev, - unsigned char *buf, unsigned int buflen, int rw) + unsigned char *buf, unsigned int buflen, int rw) { if (ata_id_has_dword_io(dev->id)) { struct ata_port *ap = dev->link->ap; @@ -312,14 +396,14 @@ static struct ata_port_operations pdc20230_port_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /* * Holtek 6560A support * - * This controller supports PIO0 to PIO2 (no IORDY even though higher timings - * can be loaded). + * This controller supports PIO0 to PIO2 (no IORDY even though higher + * timings can be loaded). */ static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev) @@ -366,14 +450,14 @@ static struct ata_port_operations ht6560a_port_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /* * Holtek 6560B support * - * This controller supports PIO0 to PIO4. We honour the BIOS/jumper FIFO setting - * unless we see an ATAPI device in which case we force it off. + * This controller supports PIO0 to PIO4. We honour the BIOS/jumper FIFO + * setting unless we see an ATAPI device in which case we force it off. * * FIXME: need to implement 2nd channel support. */ @@ -400,7 +484,7 @@ static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev) if (adev->class != ATA_DEV_ATA) { u8 rconf = inb(0x3E6); if (rconf & 0x24) { - rconf &= ~ 0x24; + rconf &= ~0x24; outb(rconf, 0x3E6); } } @@ -425,13 +509,13 @@ static struct ata_port_operations ht6560b_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_data_xfer, /* FIXME: Check 32bit and noirq */ + .data_xfer = ata_data_xfer, /* FIXME: Check 32bit and noirq */ .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /* @@ -464,7 +548,8 @@ static u8 opti_syscfg(u8 reg) * This controller supports PIO0 to PIO3. */ -static void opti82c611a_set_piomode(struct ata_port *ap, struct ata_device *adev) +static void opti82c611a_set_piomode(struct ata_port *ap, + struct ata_device *adev) { u8 active, recover, setup; struct ata_timing t; @@ -551,7 +636,7 @@ static struct ata_port_operations opti82c611a_port_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /* @@ -683,77 +768,282 @@ static struct ata_port_operations opti82c46x_port_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; +static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct ata_timing t; + struct legacy_data *qdi = ap->host->private_data; + int active, recovery; + u8 timing; + + /* Get the timing data in cycles */ + ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); + + if (qdi->fast) { + active = 8 - FIT(t.active, 1, 8); + recovery = 18 - FIT(t.recover, 3, 18); + } else { + active = 9 - FIT(t.active, 2, 9); + recovery = 15 - FIT(t.recover, 0, 15); + } + timing = (recovery << 4) | active | 0x08; + + qdi->clock[adev->devno] = timing; + + outb(timing, qdi->timing); +} /** - * legacy_init_one - attach a legacy interface - * @port: port number - * @io: I/O port start - * @ctrl: control port + * qdi6580dp_set_piomode - PIO setup for dual channel + * @ap: Port + * @adev: Device * @irq: interrupt line * - * Register an ISA bus IDE interface. Such interfaces are PIO and we - * assume do not support IRQ sharing. + * In dual channel mode the 6580 has one clock per channel and we have + * to software clockswitch in qc_issue_prot. */ -static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl, int irq) +static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev) { - struct legacy_data *ld = &legacy_data[nr_legacy_host]; - struct ata_host *host; - struct ata_port *ap; - struct platform_device *pdev; - struct ata_port_operations *ops = &legacy_port_ops; - void __iomem *io_addr, *ctrl_addr; - int pio_modes = pio_mask; - u32 mask = (1 << port); - u32 iordy = (iordy_mask & mask) ? 0: ATA_FLAG_NO_IORDY; - int ret; + struct ata_timing t; + struct legacy_data *qdi = ap->host->private_data; + int active, recovery; + u8 timing; - pdev = platform_device_register_simple(DRV_NAME, nr_legacy_host, NULL, 0); - if (IS_ERR(pdev)) - return PTR_ERR(pdev); + /* Get the timing data in cycles */ + ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); + + if (qdi->fast) { + active = 8 - FIT(t.active, 1, 8); + recovery = 18 - FIT(t.recover, 3, 18); + } else { + active = 9 - FIT(t.active, 2, 9); + recovery = 15 - FIT(t.recover, 0, 15); + } + timing = (recovery << 4) | active | 0x08; - ret = -EBUSY; - if (devm_request_region(&pdev->dev, io, 8, "pata_legacy") == NULL || - devm_request_region(&pdev->dev, ctrl, 1, "pata_legacy") == NULL) - goto fail; + qdi->clock[adev->devno] = timing; - ret = -ENOMEM; - io_addr = devm_ioport_map(&pdev->dev, io, 8); - ctrl_addr = devm_ioport_map(&pdev->dev, ctrl, 1); - if (!io_addr || !ctrl_addr) - goto fail; + outb(timing, qdi->timing + 2 * ap->port_no); + /* Clear the FIFO */ + if (adev->class != ATA_DEV_ATA) + outb(0x5F, qdi->timing + 3); +} - if (ht6560a & mask) { - ops = &ht6560a_port_ops; - pio_modes = 0x07; - iordy = ATA_FLAG_NO_IORDY; - } - if (ht6560b & mask) { - ops = &ht6560b_port_ops; - pio_modes = 0x1F; - } - if (opti82c611a & mask) { - ops = &opti82c611a_port_ops; - pio_modes = 0x0F; +/** + * qdi6580_set_piomode - PIO setup for single channel + * @ap: Port + * @adev: Device + * + * In single channel mode the 6580 has one clock per device and we can + * avoid the requirement to clock switch. We also have to load the timing + * into the right clock according to whether we are master or slave. + */ + +static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct ata_timing t; + struct legacy_data *qdi = ap->host->private_data; + int active, recovery; + u8 timing; + + /* Get the timing data in cycles */ + ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); + + if (qdi->fast) { + active = 8 - FIT(t.active, 1, 8); + recovery = 18 - FIT(t.recover, 3, 18); + } else { + active = 9 - FIT(t.active, 2, 9); + recovery = 15 - FIT(t.recover, 0, 15); } - if (opti82c46x & mask) { - ops = &opti82c46x_port_ops; - pio_modes = 0x0F; + timing = (recovery << 4) | active | 0x08; + qdi->clock[adev->devno] = timing; + outb(timing, qdi->timing + 2 * adev->devno); + /* Clear the FIFO */ + if (adev->class != ATA_DEV_ATA) + outb(0x5F, qdi->timing + 3); +} + +/** + * qdi_qc_issue_prot - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings. + */ + +static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct legacy_data *qdi = ap->host->private_data; + + if (qdi->clock[adev->devno] != qdi->last) { + if (adev->pio_mode) { + qdi->last = qdi->clock[adev->devno]; + outb(qdi->clock[adev->devno], qdi->timing + + 2 * ap->port_no); + } } + return ata_qc_issue_prot(qc); +} - /* Probe for automatically detectable controllers */ +/* For the 6580 can we flip the FIFO on/off at this point ? */ - if (io == 0x1F0 && ops == &legacy_port_ops) { - unsigned long flags; +static unsigned int qdi_data_xfer(struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int rw) +{ + struct ata_port *ap = adev->link->ap; + int slop = buflen & 3; - local_irq_save(flags); + if (ata_id_has_dword_io(adev->id)) { + if (rw == WRITE) + iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); + else + ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); + if (unlikely(slop)) { + u32 pad; + if (rw == WRITE) { + memcpy(&pad, buf + buflen - slop, slop); + pad = le32_to_cpu(pad); + iowrite32(pad, ap->ioaddr.data_addr); + } else { + pad = ioread32(ap->ioaddr.data_addr); + pad = cpu_to_le32(pad); + memcpy(buf + buflen - slop, &pad, slop); + } + } + return (buflen + 3) & ~3; + } else + return ata_data_xfer(adev, buf, buflen, rw); +} + +static struct ata_port_operations qdi6500_port_ops = { + .set_piomode = qdi6500_set_piomode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_40wire, + + .qc_prep = ata_qc_prep, + .qc_issue = qdi_qc_issue_prot, + + .data_xfer = qdi_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + + .port_start = ata_sff_port_start, +}; + +static struct ata_port_operations qdi6580_port_ops = { + .set_piomode = qdi6580_set_piomode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_40wire, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + + .data_xfer = qdi_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + + .port_start = ata_sff_port_start, +}; + +static struct ata_port_operations qdi6580dp_port_ops = { + .set_piomode = qdi6580dp_set_piomode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_40wire, + + .qc_prep = ata_qc_prep, + .qc_issue = qdi_qc_issue_prot, + + .data_xfer = qdi_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + + .port_start = ata_sff_port_start, +}; + +static struct legacy_controller controllers[] = { + {"BIOS", &legacy_port_ops, 0x1F, + ATA_FLAG_NO_IORDY, NULL }, + {"Snooping", &simple_port_ops, 0x1F, + 0 , NULL }, + {"PDC20230", &pdc20230_port_ops, 0x7, + ATA_FLAG_NO_IORDY, NULL }, + {"HT6560A", &ht6560a_port_ops, 0x07, + ATA_FLAG_NO_IORDY, NULL }, + {"HT6560B", &ht6560b_port_ops, 0x1F, + ATA_FLAG_NO_IORDY, NULL }, + {"OPTI82C611A", &opti82c611a_port_ops, 0x0F, + 0 , NULL }, + {"OPTI82C46X", &opti82c46x_port_ops, 0x0F, + 0 , NULL }, + {"QDI6500", &qdi6500_port_ops, 0x07, + ATA_FLAG_NO_IORDY, NULL }, + {"QDI6580", &qdi6580_port_ops, 0x1F, + 0 , NULL }, + {"QDI6580DP", &qdi6580dp_port_ops, 0x1F, + 0 , NULL } +}; + +/** + * probe_chip_type - Discover controller + * @probe: Probe entry to check + * + * Probe an ATA port and identify the type of controller. We don't + * check if the controller appears to be driveless at this point. + */ + +static int probe_chip_type(struct legacy_probe *probe) +{ + int mask = 1 << probe->slot; + + if (probe->port == 0x1F0) { + unsigned long flags; + local_irq_save(flags); /* Probes */ - inb(0x1F5); outb(inb(0x1F2) | 0x80, 0x1F2); + inb(0x1F5); inb(0x1F2); inb(0x3F6); inb(0x3F6); @@ -762,29 +1052,83 @@ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl if ((inb(0x1F2) & 0x80) == 0) { /* PDC20230c or 20630 ? */ - printk(KERN_INFO "PDC20230-C/20630 VLB ATA controller detected.\n"); - pio_modes = 0x07; - ops = &pdc20230_port_ops; - iordy = ATA_FLAG_NO_IORDY; + printk(KERN_INFO "PDC20230-C/20630 VLB ATA controller" + " detected.\n"); udelay(100); inb(0x1F5); + local_irq_restore(flags); + return PDC20230; } else { outb(0x55, 0x1F2); inb(0x1F2); inb(0x1F2); - if (inb(0x1F2) == 0x00) { - printk(KERN_INFO "PDC20230-B VLB ATA controller detected.\n"); - } + if (inb(0x1F2) == 0x00) + printk(KERN_INFO "PDC20230-B VLB ATA " + "controller detected.\n"); + local_irq_restore(flags); + return BIOS; } local_irq_restore(flags); } + if (ht6560a & mask) + return HT6560A; + if (ht6560b & mask) + return HT6560B; + if (opti82c611a & mask) + return OPTI611A; + if (opti82c46x & mask) + return OPTI46X; + if (autospeed & mask) + return SNOOP; + return BIOS; +} + + +/** + * legacy_init_one - attach a legacy interface + * @pl: probe record + * + * Register an ISA bus IDE interface. Such interfaces are PIO and we + * assume do not support IRQ sharing. + */ + +static __init int legacy_init_one(struct legacy_probe *probe) +{ + struct legacy_controller *controller = &controllers[probe->type]; + int pio_modes = controller->pio_mask; + unsigned long io = probe->port; + u32 mask = (1 << probe->slot); + struct ata_port_operations *ops = controller->ops; + struct legacy_data *ld = &legacy_data[probe->slot]; + struct ata_host *host = NULL; + struct ata_port *ap; + struct platform_device *pdev; + struct ata_device *dev; + void __iomem *io_addr, *ctrl_addr; + u32 iordy = (iordy_mask & mask) ? 0: ATA_FLAG_NO_IORDY; + int ret; + + iordy |= controller->flags; + + pdev = platform_device_register_simple(DRV_NAME, probe->slot, NULL, 0); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); - /* Chip does mode setting by command snooping */ - if (ops == &legacy_port_ops && (autospeed & mask)) - ops = &simple_port_ops; + ret = -EBUSY; + if (devm_request_region(&pdev->dev, io, 8, "pata_legacy") == NULL || + devm_request_region(&pdev->dev, io + 0x0206, 1, + "pata_legacy") == NULL) + goto fail; ret = -ENOMEM; + io_addr = devm_ioport_map(&pdev->dev, io, 8); + ctrl_addr = devm_ioport_map(&pdev->dev, io + 0x0206, 1); + if (!io_addr || !ctrl_addr) + goto fail; + if (controller->setup) + if (controller->setup(probe, ld) < 0) + goto fail; host = ata_host_alloc(&pdev->dev, 1); if (!host) goto fail; @@ -799,17 +1143,30 @@ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl ata_std_ports(&ap->ioaddr); ap->private_data = ld; - ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, ctrl); + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, io + 0x0206); - ret = ata_host_activate(host, irq, ata_interrupt, 0, &legacy_sht); + ret = ata_host_activate(host, probe->irq, ata_interrupt, 0, + &legacy_sht); if (ret) goto fail; - - legacy_host[nr_legacy_host++] = dev_get_drvdata(&pdev->dev); ld->platform_dev = pdev; - return 0; + /* Nothing found means we drop the port as its probably not there */ + + ret = -ENODEV; + ata_link_for_each_dev(dev, &ap->link) { + if (!ata_dev_absent(dev)) { + legacy_host[probe->slot] = host; + ld->platform_dev = pdev; + return 0; + } + } fail: + if (host) + ata_host_detach(host); + /* FIXME: use devm for this */ + if (ld->timing) + release_region(ld->timing, 2); platform_device_unregister(pdev); return ret; } @@ -820,13 +1177,15 @@ fail: * @master: set this if we find an ATA master * @master: set this if we find an ATA secondary * - * A small number of vendors implemented early PCI ATA interfaces on bridge logic - * without the ATA interface being PCI visible. Where we have a matching PCI driver - * we must skip the relevant device here. If we don't know about it then the legacy - * driver is the right driver anyway. + * A small number of vendors implemented early PCI ATA interfaces + * on bridge logic without the ATA interface being PCI visible. + * Where we have a matching PCI driver we must skip the relevant + * device here. If we don't know about it then the legacy driver + * is the right driver anyway. */ -static void legacy_check_special_cases(struct pci_dev *p, int *primary, int *secondary) +static void legacy_check_special_cases(struct pci_dev *p, int *primary, + int *secondary) { /* Cyrix CS5510 pre SFF MWDMA ATA on the bridge */ if (p->vendor == 0x1078 && p->device == 0x0000) { @@ -842,7 +1201,8 @@ static void legacy_check_special_cases(struct pci_dev *p, int *primary, int *sec if (p->vendor == 0x8086 && p->device == 0x1234) { u16 r; pci_read_config_word(p, 0x6C, &r); - if (r & 0x8000) { /* ATA port enabled */ + if (r & 0x8000) { + /* ATA port enabled */ if (r & 0x4000) *secondary = 1; else @@ -852,6 +1212,117 @@ static void legacy_check_special_cases(struct pci_dev *p, int *primary, int *sec } } +static __init void probe_opti_vlb(void) +{ + /* If an OPTI 82C46X is present find out where the channels are */ + static const char *optis[4] = { + "3/463MV", "5MV", + "5MVA", "5MVB" + }; + u8 chans = 1; + u8 ctrl = (opti_syscfg(0x30) & 0xC0) >> 6; + + opti82c46x = 3; /* Assume master and slave first */ + printk(KERN_INFO DRV_NAME ": Opti 82C46%s chipset support.\n", + optis[ctrl]); + if (ctrl == 3) + chans = (opti_syscfg(0x3F) & 0x20) ? 2 : 1; + ctrl = opti_syscfg(0xAC); + /* Check enabled and this port is the 465MV port. On the + MVB we may have two channels */ + if (ctrl & 8) { + if (chans == 2) { + legacy_probe_add(0x1F0, 14, OPTI46X, 0); + legacy_probe_add(0x170, 15, OPTI46X, 0); + } + if (ctrl & 4) + legacy_probe_add(0x170, 15, OPTI46X, 0); + else + legacy_probe_add(0x1F0, 14, OPTI46X, 0); + } else + legacy_probe_add(0x1F0, 14, OPTI46X, 0); +} + +static __init void qdi65_identify_port(u8 r, u8 res, unsigned long port) +{ + static const unsigned long ide_port[2] = { 0x170, 0x1F0 }; + /* Check card type */ + if ((r & 0xF0) == 0xC0) { + /* QD6500: single channel */ + if (r & 8) { + /* Disabled ? */ + release_region(port, 2); + return; + } + legacy_probe_add(ide_port[r & 0x01], 14 + (r & 0x01), + QDI6500, port); + } + if (((r & 0xF0) == 0xA0) || (r & 0xF0) == 0x50) { + /* QD6580: dual channel */ + if (!request_region(port + 2 , 2, "pata_qdi")) { + release_region(port, 2); + return; + } + res = inb(port + 3); + /* Single channel mode ? */ + if (res & 1) + legacy_probe_add(ide_port[r & 0x01], 14 + (r & 0x01), + QDI6580, port); + else { /* Dual channel mode */ + legacy_probe_add(0x1F0, 14, QDI6580DP, port); + /* port + 0x02, r & 0x04 */ + legacy_probe_add(0x170, 15, QDI6580DP, port + 2); + } + } +} + +static __init void probe_qdi_vlb(void) +{ + unsigned long flags; + static const unsigned long qd_port[2] = { 0x30, 0xB0 }; + int i; + + /* + * Check each possible QD65xx base address + */ + + for (i = 0; i < 2; i++) { + unsigned long port = qd_port[i]; + u8 r, res; + + + if (request_region(port, 2, "pata_qdi")) { + /* Check for a card */ + local_irq_save(flags); + /* I have no h/w that needs this delay but it + is present in the historic code */ + r = inb(port); + udelay(1); + outb(0x19, port); + udelay(1); + res = inb(port); + udelay(1); + outb(r, port); + udelay(1); + local_irq_restore(flags); + + /* Fail */ + if (res == 0x19) { + release_region(port, 2); + continue; + } + /* Passes the presence test */ + r = inb(port + 1); + udelay(1); + /* Check port agrees with port set */ + if ((r & 2) >> 1 != i) { + release_region(port, 2); + continue; + } + qdi65_identify_port(r, res, port); + } + } +} /** * legacy_init - attach legacy interfaces @@ -869,15 +1340,17 @@ static __init int legacy_init(void) int ct = 0; int primary = 0; int secondary = 0; - int last_port = NR_HOST; + int pci_present = 0; + struct legacy_probe *pl = &probe_list[0]; + int slot = 0; struct pci_dev *p = NULL; for_each_pci_dev(p) { int r; - /* Check for any overlap of the system ATA mappings. Native mode controllers - stuck on these addresses or some devices in 'raid' mode won't be found by - the storage class test */ + /* Check for any overlap of the system ATA mappings. Native + mode controllers stuck on these addresses or some devices + in 'raid' mode won't be found by the storage class test */ for (r = 0; r < 6; r++) { if (pci_resource_start(p, r) == 0x1f0) primary = 1; @@ -887,49 +1360,37 @@ static __init int legacy_init(void) /* Check for special cases */ legacy_check_special_cases(p, &primary, &secondary); - /* If PCI bus is present then don't probe for tertiary legacy ports */ - if (probe_all == 0) - last_port = 2; + /* If PCI bus is present then don't probe for tertiary + legacy ports */ + pci_present = 1; } - /* If an OPTI 82C46X is present find out where the channels are */ - if (opti82c46x) { - static const char *optis[4] = { - "3/463MV", "5MV", - "5MVA", "5MVB" - }; - u8 chans = 1; - u8 ctrl = (opti_syscfg(0x30) & 0xC0) >> 6; - - opti82c46x = 3; /* Assume master and slave first */ - printk(KERN_INFO DRV_NAME ": Opti 82C46%s chipset support.\n", optis[ctrl]); - if (ctrl == 3) - chans = (opti_syscfg(0x3F) & 0x20) ? 2 : 1; - ctrl = opti_syscfg(0xAC); - /* Check enabled and this port is the 465MV port. On the - MVB we may have two channels */ - if (ctrl & 8) { - if (ctrl & 4) - opti82c46x = 2; /* Slave */ - else - opti82c46x = 1; /* Master */ - if (chans == 2) - opti82c46x = 3; /* Master and Slave */ - } /* Slave only */ - else if (chans == 1) - opti82c46x = 1; + if (primary == 0 || all) + legacy_probe_add(0x1F0, 14, UNKNOWN, 0); + if (secondary == 0 || all) + legacy_probe_add(0x170, 15, UNKNOWN, 0); + + if (probe_all || !pci_present) { + /* ISA/VLB extra ports */ + legacy_probe_add(0x1E8, 11, UNKNOWN, 0); + legacy_probe_add(0x168, 10, UNKNOWN, 0); + legacy_probe_add(0x1E0, 8, UNKNOWN, 0); + legacy_probe_add(0x160, 12, UNKNOWN, 0); } - for (i = 0; i < last_port; i++) { - /* Skip primary if we have seen a PCI one */ - if (i == 0 && primary == 1) - continue; - /* Skip secondary if we have seen a PCI one */ - if (i == 1 && secondary == 1) + if (opti82c46x) + probe_opti_vlb(); + if (qdi) + probe_qdi_vlb(); + + + for (i = 0; i < NR_HOST; i++, pl++) { + if (pl->port == 0) continue; - if (legacy_init_one(i, legacy_port[i], - legacy_port[i] + 0x0206, - legacy_irq[i]) == 0) + if (pl->type == UNKNOWN) + pl->type = probe_chip_type(pl); + pl->slot = slot++; + if (legacy_init_one(pl) == 0) ct++; } if (ct != 0) @@ -943,7 +1404,6 @@ static __exit void legacy_exit(void) for (i = 0; i < nr_legacy_host; i++) { struct legacy_data *ld = &legacy_data[i]; - ata_host_detach(legacy_host[i]); platform_device_unregister(ld->platform_dev); if (ld->timing) @@ -962,9 +1422,9 @@ module_param(ht6560a, int, 0); module_param(ht6560b, int, 0); module_param(opti82c611a, int, 0); module_param(opti82c46x, int, 0); +module_param(qdi, int, 0); module_param(pio_mask, int, 0); module_param(iordy_mask, int, 0); module_init(legacy_init); module_exit(legacy_exit); - -- cgit v1.2.3-59-g8ed1b From cadb7345d92628d46cccd3765cc15cb9cd6abccf Mon Sep 17 00:00:00 2001 From: "akpm@linux-foundation.org" Date: Tue, 15 Jan 2008 16:01:52 -0800 Subject: [libata] Prefer SCSI_SENSE_BUFFERSIZE to sizeof() Cc: James Bottomley Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/ata/libata-scsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 15a4c8a20358..989b7755af3d 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2342,7 +2342,7 @@ static void atapi_request_sense(struct ata_queued_cmd *qc) ata_qc_reinit(qc); /* setup sg table and init transfer direction */ - sg_init_one(&qc->sgent, cmd->sense_buffer, sizeof(cmd->sense_buffer)); + sg_init_one(&qc->sgent, cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE); ata_sg_init(qc, &qc->sgent, 1); qc->dma_dir = DMA_FROM_DEVICE; -- cgit v1.2.3-59-g8ed1b From 4e6b79fa61091a0ed9b0af0f573cc257772cd88d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 18 Jan 2008 18:36:28 +0900 Subject: libata: factor out ata_pci_activate_sff_host() from ata_pci_one() Factor out ata_pci_activate_sff_host() from ata_pci_one(). This does about the same thing as ata_host_activate() but needs to be separate because SFF controllers use different and multiple IRQs in legacy mode. This will be used to make SFF LLD initialization more flexible. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 1 + drivers/ata/libata-sff.c | 187 +++++++++++++++++++++++++--------------------- include/linux/libata.h | 3 + 3 files changed, 107 insertions(+), 84 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 8c82193b077e..ce803d18e96a 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -7629,6 +7629,7 @@ EXPORT_SYMBOL_GPL(pci_test_config_bits); EXPORT_SYMBOL_GPL(ata_pci_init_sff_host); EXPORT_SYMBOL_GPL(ata_pci_init_bmdma); EXPORT_SYMBOL_GPL(ata_pci_prepare_sff_host); +EXPORT_SYMBOL_GPL(ata_pci_activate_sff_host); EXPORT_SYMBOL_GPL(ata_pci_init_one); EXPORT_SYMBOL_GPL(ata_pci_remove_one); #ifdef CONFIG_PM diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 97dd8f2796b7..60cd4b179766 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -713,6 +713,99 @@ int ata_pci_prepare_sff_host(struct pci_dev *pdev, return rc; } +/** + * ata_pci_activate_sff_host - start SFF host, request IRQ and register it + * @host: target SFF ATA host + * @irq_handler: irq_handler used when requesting IRQ(s) + * @sht: scsi_host_template to use when registering the host + * + * This is the counterpart of ata_host_activate() for SFF ATA + * hosts. This separate helper is necessary because SFF hosts + * use two separate interrupts in legacy mode. + * + * LOCKING: + * Inherited from calling layer (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_pci_activate_sff_host(struct ata_host *host, + irq_handler_t irq_handler, + struct scsi_host_template *sht) +{ + struct device *dev = host->dev; + struct pci_dev *pdev = to_pci_dev(dev); + const char *drv_name = dev_driver_string(host->dev); + int legacy_mode = 0, rc; + + rc = ata_host_start(host); + if (rc) + return rc; + + if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) { + u8 tmp8, mask; + + /* TODO: What if one channel is in native mode ... */ + pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8); + mask = (1 << 2) | (1 << 0); + if ((tmp8 & mask) != mask) + legacy_mode = 1; +#if defined(CONFIG_NO_ATA_LEGACY) + /* Some platforms with PCI limits cannot address compat + port space. In that case we punt if their firmware has + left a device in compatibility mode */ + if (legacy_mode) { + printk(KERN_ERR "ata: Compatibility mode ATA is not supported on this platform, skipping.\n"); + return -EOPNOTSUPP; + } +#endif + } + + if (!devres_open_group(dev, NULL, GFP_KERNEL)) + return -ENOMEM; + + if (!legacy_mode && pdev->irq) { + rc = devm_request_irq(dev, pdev->irq, irq_handler, + IRQF_SHARED, drv_name, host); + if (rc) + goto out; + + ata_port_desc(host->ports[0], "irq %d", pdev->irq); + ata_port_desc(host->ports[1], "irq %d", pdev->irq); + } else if (legacy_mode) { + if (!ata_port_is_dummy(host->ports[0])) { + rc = devm_request_irq(dev, ATA_PRIMARY_IRQ(pdev), + irq_handler, IRQF_SHARED, + drv_name, host); + if (rc) + goto out; + + ata_port_desc(host->ports[0], "irq %d", + ATA_PRIMARY_IRQ(pdev)); + } + + if (!ata_port_is_dummy(host->ports[1])) { + rc = devm_request_irq(dev, ATA_SECONDARY_IRQ(pdev), + irq_handler, IRQF_SHARED, + drv_name, host); + if (rc) + goto out; + + ata_port_desc(host->ports[1], "irq %d", + ATA_SECONDARY_IRQ(pdev)); + } + } + + rc = ata_host_register(host, sht); + out: + if (rc == 0) + devres_remove_group(dev, NULL); + else + devres_release_group(dev, NULL); + + return rc; +} + /** * ata_pci_init_one - Initialize/register PCI IDE host controller * @pdev: Controller to be initialized @@ -742,9 +835,6 @@ int ata_pci_init_one(struct pci_dev *pdev, struct device *dev = &pdev->dev; const struct ata_port_info *pi = NULL; struct ata_host *host = NULL; - const char *drv_name = dev_driver_string(&pdev->dev); - u8 mask; - int legacy_mode = 0; int i, rc; DPRINTK("ENTER\n"); @@ -766,95 +856,24 @@ int ata_pci_init_one(struct pci_dev *pdev, if (!devres_open_group(dev, NULL, GFP_KERNEL)) return -ENOMEM; - /* FIXME: Really for ATA it isn't safe because the device may be - multi-purpose and we want to leave it alone if it was already - enabled. Secondly for shared use as Arjan says we want refcounting - - Checking dev->is_enabled is insufficient as this is not set at - boot for the primary video which is BIOS enabled - */ - rc = pcim_enable_device(pdev); if (rc) - goto err_out; + goto out; - if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) { - u8 tmp8; - - /* TODO: What if one channel is in native mode ... */ - pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8); - mask = (1 << 2) | (1 << 0); - if ((tmp8 & mask) != mask) - legacy_mode = 1; -#if defined(CONFIG_NO_ATA_LEGACY) - /* Some platforms with PCI limits cannot address compat - port space. In that case we punt if their firmware has - left a device in compatibility mode */ - if (legacy_mode) { - printk(KERN_ERR "ata: Compatibility mode ATA is not supported on this platform, skipping.\n"); - rc = -EOPNOTSUPP; - goto err_out; - } -#endif - } - - /* prepare host */ + /* prepare and activate SFF host */ rc = ata_pci_prepare_sff_host(pdev, ppi, &host); if (rc) - goto err_out; + goto out; pci_set_master(pdev); + rc = ata_pci_activate_sff_host(host, pi->port_ops->irq_handler, + pi->sht); + out: + if (rc == 0) + devres_remove_group(&pdev->dev, NULL); + else + devres_release_group(&pdev->dev, NULL); - /* start host and request IRQ */ - rc = ata_host_start(host); - if (rc) - goto err_out; - - if (!legacy_mode && pdev->irq) { - /* We may have no IRQ assigned in which case we can poll. This - shouldn't happen on a sane system but robustness is cheap - in this case */ - rc = devm_request_irq(dev, pdev->irq, pi->port_ops->irq_handler, - IRQF_SHARED, drv_name, host); - if (rc) - goto err_out; - - ata_port_desc(host->ports[0], "irq %d", pdev->irq); - ata_port_desc(host->ports[1], "irq %d", pdev->irq); - } else if (legacy_mode) { - if (!ata_port_is_dummy(host->ports[0])) { - rc = devm_request_irq(dev, ATA_PRIMARY_IRQ(pdev), - pi->port_ops->irq_handler, - IRQF_SHARED, drv_name, host); - if (rc) - goto err_out; - - ata_port_desc(host->ports[0], "irq %d", - ATA_PRIMARY_IRQ(pdev)); - } - - if (!ata_port_is_dummy(host->ports[1])) { - rc = devm_request_irq(dev, ATA_SECONDARY_IRQ(pdev), - pi->port_ops->irq_handler, - IRQF_SHARED, drv_name, host); - if (rc) - goto err_out; - - ata_port_desc(host->ports[1], "irq %d", - ATA_SECONDARY_IRQ(pdev)); - } - } - - /* register */ - rc = ata_host_register(host, pi->sht); - if (rc) - goto err_out; - - devres_remove_group(dev, NULL); - return 0; - -err_out: - devres_release_group(dev, NULL); return rc; } diff --git a/include/linux/libata.h b/include/linux/libata.h index ccb055636f37..4374c4277780 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1033,6 +1033,9 @@ extern int ata_pci_init_bmdma(struct ata_host *host); extern int ata_pci_prepare_sff_host(struct pci_dev *pdev, const struct ata_port_info * const * ppi, struct ata_host **r_host); +extern int ata_pci_activate_sff_host(struct ata_host *host, + irq_handler_t irq_handler, + struct scsi_host_template *sht); extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits); extern unsigned long ata_pci_default_filter(struct ata_device *dev, unsigned long xfer_mask); -- cgit v1.2.3-59-g8ed1b From 8b09f0da0f873698a7e8b329dfb7b10fd42d5cdf Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 18 Jan 2008 18:36:29 +0900 Subject: ata_piix: convert to prepare - activate initialization ata_piix requires more configuration during initialization than most other SFF compliant controllers and one-go initialzation with ata_pci_one() is too rigid. This patch converts ata_piix to use two step prepare - activate initialization used by other more advanced controllers. This conversion brings the happy side effect of enabling PCI device before accessing PCI configuration registers. Other than that, there shouldn't be any behavior change. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 79 +++++++++++++++++++++++--------------------------- 1 file changed, 37 insertions(+), 42 deletions(-) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 3183b3f38e49..024e6d52eab2 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -316,7 +316,6 @@ static const struct ata_port_operations piix_pata_ops = { .post_internal_cmd = ata_bmdma_post_internal_cmd, .cable_detect = ata_cable_40wire, - .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, @@ -348,7 +347,6 @@ static const struct ata_port_operations ich_pata_ops = { .post_internal_cmd = ata_bmdma_post_internal_cmd, .cable_detect = ich_pata_cable_detect, - .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, @@ -375,7 +373,6 @@ static const struct ata_port_operations piix_sata_ops = { .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, - .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, @@ -521,7 +518,6 @@ static const struct piix_map_db *piix_map_db_table[] = { static struct ata_port_info piix_port_info[] = { [piix_pata_mwdma] = /* PIIX3 MWDMA only */ { - .sht = &piix_sht, .flags = PIIX_PATA_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ @@ -530,7 +526,6 @@ static struct ata_port_info piix_port_info[] = { [piix_pata_33] = /* PIIX4 at 33MHz */ { - .sht = &piix_sht, .flags = PIIX_PATA_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ @@ -540,7 +535,6 @@ static struct ata_port_info piix_port_info[] = { [ich_pata_33] = /* ICH0 - ICH at 33Mhz*/ { - .sht = &piix_sht, .flags = PIIX_PATA_FLAGS, .pio_mask = 0x1f, /* pio 0-4 */ .mwdma_mask = 0x06, /* Check: maybe 0x07 */ @@ -550,7 +544,6 @@ static struct ata_port_info piix_port_info[] = { [ich_pata_66] = /* ICH controllers up to 66MHz */ { - .sht = &piix_sht, .flags = PIIX_PATA_FLAGS, .pio_mask = 0x1f, /* pio 0-4 */ .mwdma_mask = 0x06, /* MWDMA0 is broken on chip */ @@ -560,7 +553,6 @@ static struct ata_port_info piix_port_info[] = { [ich_pata_100] = { - .sht = &piix_sht, .flags = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x06, /* mwdma1-2 */ @@ -570,7 +562,6 @@ static struct ata_port_info piix_port_info[] = { [ich5_sata] = { - .sht = &piix_sht, .flags = PIIX_SATA_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -580,7 +571,6 @@ static struct ata_port_info piix_port_info[] = { [ich6_sata] = { - .sht = &piix_sht, .flags = PIIX_SATA_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -590,7 +580,6 @@ static struct ata_port_info piix_port_info[] = { [ich6_sata_ahci] = { - .sht = &piix_sht, .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -600,7 +589,6 @@ static struct ata_port_info piix_port_info[] = { [ich6m_sata_ahci] = { - .sht = &piix_sht, .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -610,7 +598,6 @@ static struct ata_port_info piix_port_info[] = { [ich8_sata_ahci] = { - .sht = &piix_sht, .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -620,7 +607,6 @@ static struct ata_port_info piix_port_info[] = { [ich8_2port_sata] = { - .sht = &piix_sht, .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -630,7 +616,6 @@ static struct ata_port_info piix_port_info[] = { [tolapai_sata_ahci] = { - .sht = &piix_sht, .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -640,7 +625,6 @@ static struct ata_port_info piix_port_info[] = { [ich8m_apple_sata_ahci] = { - .sht = &piix_sht, .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -1256,10 +1240,10 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev) return no_piix_dma; } -static void __devinit piix_init_pcs(struct pci_dev *pdev, - struct ata_port_info *pinfo, +static void __devinit piix_init_pcs(struct ata_host *host, const struct piix_map_db *map_db) { + struct pci_dev *pdev = to_pci_dev(host->dev); u16 pcs, new_pcs; pci_read_config_word(pdev, ICH5_PCS, &pcs); @@ -1273,11 +1257,10 @@ static void __devinit piix_init_pcs(struct pci_dev *pdev, } } -static void __devinit piix_init_sata_map(struct pci_dev *pdev, - struct ata_port_info *pinfo, - const struct piix_map_db *map_db) +static const int *__devinit piix_init_sata_map(struct pci_dev *pdev, + struct ata_port_info *pinfo, + const struct piix_map_db *map_db) { - struct piix_host_priv *hpriv = pinfo[0].private_data; const int *map; int i, invalid_map = 0; u8 map_value; @@ -1301,7 +1284,6 @@ static void __devinit piix_init_sata_map(struct pci_dev *pdev, case IDE: WARN_ON((i & 1) || map[i + 1] != IDE); pinfo[i / 2] = piix_port_info[ich_pata_100]; - pinfo[i / 2].private_data = hpriv; i++; printk(" IDE IDE"); break; @@ -1319,7 +1301,7 @@ static void __devinit piix_init_sata_map(struct pci_dev *pdev, dev_printk(KERN_ERR, &pdev->dev, "invalid MAP value %u\n", map_value); - hpriv->map = map; + return map; } static void piix_iocfg_bit18_quirk(struct pci_dev *pdev) @@ -1378,8 +1360,10 @@ static int piix_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) struct device *dev = &pdev->dev; struct ata_port_info port_info[2]; const struct ata_port_info *ppi[] = { &port_info[0], &port_info[1] }; - struct piix_host_priv *hpriv; unsigned long port_flags; + struct ata_host *host; + struct piix_host_priv *hpriv; + int rc; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, @@ -1389,17 +1373,31 @@ static int piix_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (!in_module_init) return -ENODEV; + port_info[0] = piix_port_info[ent->driver_data]; + port_info[1] = piix_port_info[ent->driver_data]; + + port_flags = port_info[0].flags; + + /* enable device and prepare host */ + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + /* SATA map init can change port_info, do it before prepping host */ hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); if (!hpriv) return -ENOMEM; - port_info[0] = piix_port_info[ent->driver_data]; - port_info[1] = piix_port_info[ent->driver_data]; - port_info[0].private_data = hpriv; - port_info[1].private_data = hpriv; + if (port_flags & ATA_FLAG_SATA) + hpriv->map = piix_init_sata_map(pdev, port_info, + piix_map_db_table[ent->driver_data]); - port_flags = port_info[0].flags; + rc = ata_pci_prepare_sff_host(pdev, ppi, &host); + if (rc) + return rc; + host->private_data = hpriv; + /* initialize controller */ if (port_flags & PIIX_FLAG_AHCI) { u8 tmp; pci_read_config_byte(pdev, PIIX_SCC, &tmp); @@ -1410,13 +1408,8 @@ static int piix_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } } - /* Initialize SATA map */ - if (port_flags & ATA_FLAG_SATA) { - piix_init_sata_map(pdev, port_info, - piix_map_db_table[ent->driver_data]); - piix_init_pcs(pdev, port_info, - piix_map_db_table[ent->driver_data]); - } + if (port_flags & ATA_FLAG_SATA) + piix_init_pcs(host, piix_map_db_table[ent->driver_data]); /* apply IOCFG bit18 quirk */ piix_iocfg_bit18_quirk(pdev); @@ -1434,12 +1427,14 @@ static int piix_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* This writes into the master table but it does not really matter for this errata as we will apply it to all the PIIX devices on the board */ - port_info[0].mwdma_mask = 0; - port_info[0].udma_mask = 0; - port_info[1].mwdma_mask = 0; - port_info[1].udma_mask = 0; + host->ports[0]->mwdma_mask = 0; + host->ports[0]->udma_mask = 0; + host->ports[1]->mwdma_mask = 0; + host->ports[1]->udma_mask = 0; } - return ata_pci_init_one(pdev, ppi); + + pci_set_master(pdev); + return ata_pci_activate_sff_host(host, ata_interrupt, &piix_sht); } static int __init piix_init(void) -- cgit v1.2.3-59-g8ed1b From c729072459446885c5c200137de1db32da5db4dc Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 18 Jan 2008 18:36:30 +0900 Subject: ata_piix: implement SIDPR SCR access For ICH8, SCRs can be accessed using index and data register pair located at BAR 5. This patch implements support for it such that PHY status, errors and hardreset are available for those controllers. This is the only case where two devices on a PATA channel have access to SCRs and creates a unique problem of mapping two SCRs to one link. Note that this is different from PMP case in that they aren't quite separate links - e.g. softreset resets both devices. This problem is worked around by merging the SCR values. To upper layer, it looks like there is a single link with one set of SCRs but with two devices. This works well enough for PHY event, error reporting and hardreset. Supporting hardreset is important because in rare cases SATA devices fail to recover without it after PHY errors. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 251 ++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 247 insertions(+), 4 deletions(-) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 024e6d52eab2..a65c8ae5c461 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -101,9 +101,14 @@ enum { ICH5_PMR = 0x90, /* port mapping register */ ICH5_PCS = 0x92, /* port control and status */ PIIX_SCC = 0x0A, /* sub-class code register */ + PIIX_SIDPR_BAR = 5, + PIIX_SIDPR_LEN = 16, + PIIX_SIDPR_IDX = 0, + PIIX_SIDPR_DATA = 4, PIIX_FLAG_AHCI = (1 << 27), /* AHCI possible */ PIIX_FLAG_CHECKINTR = (1 << 28), /* make sure PCI INTx enabled */ + PIIX_FLAG_SIDPR = (1 << 29), /* SATA idx/data pair regs */ PIIX_PATA_FLAGS = ATA_FLAG_SLAVE_POSS, PIIX_SATA_FLAGS = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR, @@ -152,6 +157,7 @@ struct piix_map_db { struct piix_host_priv { const int *map; + void __iomem *sidpr; }; static int piix_init_one(struct pci_dev *pdev, @@ -162,6 +168,9 @@ static void piix_set_dmamode(struct ata_port *ap, struct ata_device *adev); static void ich_set_dmamode(struct ata_port *ap, struct ata_device *adev); static int ich_pata_cable_detect(struct ata_port *ap); static u8 piix_vmw_bmdma_status(struct ata_port *ap); +static int piix_sidpr_scr_read(struct ata_port *ap, unsigned int reg, u32 *val); +static int piix_sidpr_scr_write(struct ata_port *ap, unsigned int reg, u32 val); +static void piix_sidpr_error_handler(struct ata_port *ap); #ifdef CONFIG_PM static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); static int piix_pci_device_resume(struct pci_dev *pdev); @@ -411,6 +420,35 @@ static const struct ata_port_operations piix_vmw_ops = { .port_start = ata_port_start, }; +static const struct ata_port_operations piix_sidpr_sata_ops = { + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_data_xfer, + + .scr_read = piix_sidpr_scr_read, + .scr_write = piix_sidpr_scr_write, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = piix_sidpr_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + + .port_start = ata_port_start, +}; + static const struct piix_map_db ich5_map_db = { .mask = 0x7, .port_enable = 0x3, @@ -598,7 +636,8 @@ static struct ata_port_info piix_port_info[] = { [ich8_sata_ahci] = { - .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI, + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI | + PIIX_FLAG_SIDPR, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = ATA_UDMA6, @@ -607,7 +646,8 @@ static struct ata_port_info piix_port_info[] = { [ich8_2port_sata] = { - .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI, + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI | + PIIX_FLAG_SIDPR, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = ATA_UDMA6, @@ -625,7 +665,8 @@ static struct ata_port_info piix_port_info[] = { [ich8m_apple_sata_ahci] = { - .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI, + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI | + PIIX_FLAG_SIDPR, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = ATA_UDMA6, @@ -974,6 +1015,180 @@ static void ich_set_dmamode(struct ata_port *ap, struct ata_device *adev) do_pata_set_dmamode(ap, adev, 1); } +/* + * Serial ATA Index/Data Pair Superset Registers access + * + * Beginning from ICH8, there's a sane way to access SCRs using index + * and data register pair located at BAR5. This creates an + * interesting problem of mapping two SCRs to one port. + * + * Although they have separate SCRs, the master and slave aren't + * independent enough to be treated as separate links - e.g. softreset + * resets both. Also, there's no protocol defined for hard resetting + * singled device sharing the virtual port (no defined way to acquire + * device signature). This is worked around by merging the SCR values + * into one sensible value and requesting follow-up SRST after + * hardreset. + * + * SCR merging is perfomed in nibbles which is the unit contents in + * SCRs are organized. If two values are equal, the value is used. + * When they differ, merge table which lists precedence of possible + * values is consulted and the first match or the last entry when + * nothing matches is used. When there's no merge table for the + * specific nibble, value from the first port is used. + */ +static const int piix_sidx_map[] = { + [SCR_STATUS] = 0, + [SCR_ERROR] = 2, + [SCR_CONTROL] = 1, +}; + +static void piix_sidpr_sel(struct ata_device *dev, unsigned int reg) +{ + struct ata_port *ap = dev->link->ap; + struct piix_host_priv *hpriv = ap->host->private_data; + + iowrite32(((ap->port_no * 2 + dev->devno) << 8) | piix_sidx_map[reg], + hpriv->sidpr + PIIX_SIDPR_IDX); +} + +static int piix_sidpr_read(struct ata_device *dev, unsigned int reg) +{ + struct piix_host_priv *hpriv = dev->link->ap->host->private_data; + + piix_sidpr_sel(dev, reg); + return ioread32(hpriv->sidpr + PIIX_SIDPR_DATA); +} + +static void piix_sidpr_write(struct ata_device *dev, unsigned int reg, u32 val) +{ + struct piix_host_priv *hpriv = dev->link->ap->host->private_data; + + piix_sidpr_sel(dev, reg); + iowrite32(val, hpriv->sidpr + PIIX_SIDPR_DATA); +} + +u32 piix_merge_scr(u32 val0, u32 val1, const int * const *merge_tbl) +{ + u32 val = 0; + int i, mi; + + for (i = 0, mi = 0; i < 32 / 4; i++) { + u8 c0 = (val0 >> (i * 4)) & 0xf; + u8 c1 = (val1 >> (i * 4)) & 0xf; + u8 merged = c0; + const int *cur; + + /* if no merge preference, assume the first value */ + cur = merge_tbl[mi]; + if (!cur) + goto done; + mi++; + + /* if two values equal, use it */ + if (c0 == c1) + goto done; + + /* choose the first match or the last from the merge table */ + while (*cur != -1) { + if (c0 == *cur || c1 == *cur) + break; + cur++; + } + if (*cur == -1) + cur--; + merged = *cur; + done: + val |= merged << (i * 4); + } + + return val; +} + +static int piix_sidpr_scr_read(struct ata_port *ap, unsigned int reg, u32 *val) +{ + const int * const sstatus_merge_tbl[] = { + /* DET */ (const int []){ 1, 3, 0, 4, 3, -1 }, + /* SPD */ (const int []){ 2, 1, 0, -1 }, + /* IPM */ (const int []){ 6, 2, 1, 0, -1 }, + NULL, + }; + const int * const scontrol_merge_tbl[] = { + /* DET */ (const int []){ 1, 0, 4, 0, -1 }, + /* SPD */ (const int []){ 0, 2, 1, 0, -1 }, + /* IPM */ (const int []){ 0, 1, 2, 3, 0, -1 }, + NULL, + }; + u32 v0, v1; + + if (reg >= ARRAY_SIZE(piix_sidx_map)) + return -EINVAL; + + if (!(ap->flags & ATA_FLAG_SLAVE_POSS)) { + *val = piix_sidpr_read(&ap->link.device[0], reg); + return 0; + } + + v0 = piix_sidpr_read(&ap->link.device[0], reg); + v1 = piix_sidpr_read(&ap->link.device[1], reg); + + switch (reg) { + case SCR_STATUS: + *val = piix_merge_scr(v0, v1, sstatus_merge_tbl); + break; + case SCR_ERROR: + *val = v0 | v1; + break; + case SCR_CONTROL: + *val = piix_merge_scr(v0, v1, scontrol_merge_tbl); + break; + } + + return 0; +} + +static int piix_sidpr_scr_write(struct ata_port *ap, unsigned int reg, u32 val) +{ + if (reg >= ARRAY_SIZE(piix_sidx_map)) + return -EINVAL; + + piix_sidpr_write(&ap->link.device[0], reg, val); + + if (ap->flags & ATA_FLAG_SLAVE_POSS) + piix_sidpr_write(&ap->link.device[1], reg, val); + + return 0; +} + +static int piix_sidpr_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); + int rc; + + /* do hardreset */ + rc = sata_link_hardreset(link, timing, deadline); + if (rc) { + ata_link_printk(link, KERN_ERR, + "COMRESET failed (errno=%d)\n", rc); + return rc; + } + + /* TODO: phy layer with polling, timeouts, etc. */ + if (ata_link_offline(link)) { + *class = ATA_DEV_NONE; + return 0; + } + + return -EAGAIN; +} + +static void piix_sidpr_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, + piix_sidpr_hardreset, ata_std_postreset); +} + #ifdef CONFIG_PM static int piix_broken_suspend(void) { @@ -1304,6 +1519,32 @@ static const int *__devinit piix_init_sata_map(struct pci_dev *pdev, return map; } +static void __devinit piix_init_sidpr(struct ata_host *host) +{ + struct pci_dev *pdev = to_pci_dev(host->dev); + struct piix_host_priv *hpriv = host->private_data; + int i; + + /* check for availability */ + for (i = 0; i < 4; i++) + if (hpriv->map[i] == IDE) + return; + + if (!(host->ports[0]->flags & PIIX_FLAG_SIDPR)) + return; + + if (pci_resource_start(pdev, PIIX_SIDPR_BAR) == 0 || + pci_resource_len(pdev, PIIX_SIDPR_BAR) != PIIX_SIDPR_LEN) + return; + + if (pcim_iomap_regions(pdev, 1 << PIIX_SIDPR_BAR, DRV_NAME)) + return; + + hpriv->sidpr = pcim_iomap_table(pdev)[PIIX_SIDPR_BAR]; + host->ports[0]->ops = &piix_sidpr_sata_ops; + host->ports[1]->ops = &piix_sidpr_sata_ops; +} + static void piix_iocfg_bit18_quirk(struct pci_dev *pdev) { static const struct dmi_system_id sysids[] = { @@ -1408,8 +1649,10 @@ static int piix_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } } - if (port_flags & ATA_FLAG_SATA) + if (port_flags & ATA_FLAG_SATA) { piix_init_pcs(host, piix_map_db_table[ent->driver_data]); + piix_init_sidpr(host); + } /* apply IOCFG bit18 quirk */ piix_iocfg_bit18_quirk(pdev); -- cgit v1.2.3-59-g8ed1b From b710a1f4b34438b624e9c6c2dc8bcf54b0b0ba27 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 5 Jan 2008 23:11:57 +0900 Subject: ahci: factor out AHCI enabling and enable AHCI before reading CAP Factor out AHCI enabling into ahci_enable_ahci() and enabling AHCI before reading CAP in ahci_save_initial_config() as the spec requires enabling AHCI mode before accessing any other registers. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 27 ++++++++++++++++++++------- 1 file changed, 20 insertions(+), 7 deletions(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 49761bc12cf2..6f089b899a1a 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -597,6 +597,20 @@ static inline void __iomem *ahci_port_base(struct ata_port *ap) return __ahci_port_base(ap->host, ap->port_no); } +static void ahci_enable_ahci(void __iomem *mmio) +{ + u32 tmp; + + /* turn on AHCI_EN */ + tmp = readl(mmio + HOST_CTL); + if (!(tmp & HOST_AHCI_EN)) { + tmp |= HOST_AHCI_EN; + writel(tmp, mmio + HOST_CTL); + tmp = readl(mmio + HOST_CTL); /* flush && sanity check */ + WARN_ON(!(tmp & HOST_AHCI_EN)); + } +} + /** * ahci_save_initial_config - Save and fixup initial config values * @pdev: target PCI device @@ -619,6 +633,9 @@ static void ahci_save_initial_config(struct pci_dev *pdev, u32 cap, port_map; int i; + /* make sure AHCI mode is enabled before accessing CAP */ + ahci_enable_ahci(mmio); + /* Values prefixed with saved_ are written back to host after * reset. Values without are used for driver operation. */ @@ -1043,13 +1060,10 @@ static int ahci_reset_controller(struct ata_host *host) /* we must be in AHCI mode, before using anything * AHCI-specific, such as HOST_RESET. */ - tmp = readl(mmio + HOST_CTL); - if (!(tmp & HOST_AHCI_EN)) { - tmp |= HOST_AHCI_EN; - writel(tmp, mmio + HOST_CTL); - } + ahci_enable_ahci(mmio); /* global controller reset */ + tmp = readl(mmio + HOST_CTL); if ((tmp & HOST_RESET) == 0) { writel(tmp | HOST_RESET, mmio + HOST_CTL); readl(mmio + HOST_CTL); /* flush */ @@ -1068,8 +1082,7 @@ static int ahci_reset_controller(struct ata_host *host) } /* turn on AHCI mode */ - writel(HOST_AHCI_EN, mmio + HOST_CTL); - (void) readl(mmio + HOST_CTL); /* flush */ + ahci_enable_ahci(mmio); /* some registers might be cleared on reset. restore initial values */ ahci_restore_initial_config(host); -- cgit v1.2.3-59-g8ed1b From 75f9cafc2d24a1cf44d7c3f3e5b4f7a393afcf71 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 3 Jan 2008 01:21:14 +0900 Subject: libata: fix off-by-one in error categorization ATA_ECAT_DUBIOUS_BASE was too high by one and thus all DUBIOUS error categorizations were wrong. This passed test because only ATA_BUS and UNK_DEV were used during testing and the ones after them - ATA_BUS and an overflowed entry - behaved similarly. This patch fixes the problem by adding DUBIOUS_NONE category and use it as base. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 419552603a16..4e31071acc02 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -61,12 +61,11 @@ enum { ATA_ECAT_ATA_BUS = 1, ATA_ECAT_TOUT_HSM = 2, ATA_ECAT_UNK_DEV = 3, - ATA_ECAT_DUBIOUS_ATA_BUS = 4, - ATA_ECAT_DUBIOUS_TOUT_HSM = 5, - ATA_ECAT_DUBIOUS_UNK_DEV = 6, - ATA_ECAT_NR = 7, - - ATA_ECAT_DUBIOUS_BASE = ATA_ECAT_DUBIOUS_ATA_BUS, + ATA_ECAT_DUBIOUS_NONE = 4, + ATA_ECAT_DUBIOUS_ATA_BUS = 5, + ATA_ECAT_DUBIOUS_TOUT_HSM = 6, + ATA_ECAT_DUBIOUS_UNK_DEV = 7, + ATA_ECAT_NR = 8, }; /* Waiting in ->prereset can never be reliable. It's sometimes nice @@ -1499,7 +1498,7 @@ static int ata_eh_categorize_error(unsigned int eflags, unsigned int err_mask, *xfer_ok = 1; if (!*xfer_ok) - base = ATA_ECAT_DUBIOUS_BASE; + base = ATA_ECAT_DUBIOUS_NONE; if (err_mask & AC_ERR_ATA_BUS) return base + ATA_ECAT_ATA_BUS; -- cgit v1.2.3-59-g8ed1b From 0eaea364edec4132fe42ef33fe87edb15f00507b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 19 Jan 2008 15:48:59 +0000 Subject: pata_mpc52xx: remove un-needed assignment ata_irq is always assigned so does not need to be initialised to zero. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/pata_mpc52xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c index 50c56e2814c1..dc401626cdb2 100644 --- a/drivers/ata/pata_mpc52xx.c +++ b/drivers/ata/pata_mpc52xx.c @@ -364,7 +364,7 @@ mpc52xx_ata_probe(struct of_device *op, const struct of_device_id *match) { unsigned int ipb_freq; struct resource res_mem; - int ata_irq = NO_IRQ; + int ata_irq; struct mpc52xx_ata __iomem *ata_regs; struct mpc52xx_ata_priv *priv; int rv; -- cgit v1.2.3-59-g8ed1b From 0f069788c32ea7af108c6032dfb0594cc718bde8 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 19 Jan 2008 15:52:56 +0000 Subject: pata_serverworks: Fix cable types and cosmetics Minor tidying up. Only real change is to return UNK not 80 wire when we don't know the cable type. This didn't use to matter but with Tejun's reworking of cable detection it may. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/pata_serverworks.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index 8bed88873720..9c523fbf529e 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -41,7 +41,7 @@ #include #define DRV_NAME "pata_serverworks" -#define DRV_VERSION "0.4.2" +#define DRV_VERSION "0.4.3" #define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */ #define SVWKS_CSB6_REVISION 0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */ @@ -102,7 +102,7 @@ static int osb4_cable(struct ata_port *ap) { } /** - * csb4_cable - CSB5/6 cable detect + * csb_cable - CSB5/6 cable detect * @ap: ATA port to check * * Serverworks default arrangement is to use the drive side detection @@ -110,7 +110,7 @@ static int osb4_cable(struct ata_port *ap) { */ static int csb_cable(struct ata_port *ap) { - return ATA_CBL_PATA80; + return ATA_CBL_PATA_UNK; } struct sv_cable_table { @@ -231,7 +231,6 @@ static unsigned long serverworks_csb_filter(struct ata_device *adev, unsigned lo return ata_pci_default_filter(adev, mask); } - /** * serverworks_set_piomode - set initial PIO mode data * @ap: ATA interface @@ -243,7 +242,7 @@ static unsigned long serverworks_csb_filter(struct ata_device *adev, unsigned lo static void serverworks_set_piomode(struct ata_port *ap, struct ata_device *adev) { static const u8 pio_mode[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 }; - int offset = 1 + (2 * ap->port_no) - adev->devno; + int offset = 1 + 2 * ap->port_no - adev->devno; int devbits = (2 * ap->port_no + adev->devno) * 4; u16 csb5_pio; struct pci_dev *pdev = to_pci_dev(ap->host->dev); -- cgit v1.2.3-59-g8ed1b From 3e9b90265e9ab191c8f7e072fd0abf05824d2f1b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 19 Jan 2008 15:53:55 +0000 Subject: pata_winbond: error return If no device is active return an error not zero. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/pata_winbond.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c index 17a9d0713232..99c92eda217b 100644 --- a/drivers/ata/pata_winbond.c +++ b/drivers/ata/pata_winbond.c @@ -195,7 +195,7 @@ static __init int winbond_init_one(unsigned long port) reg = winbond_readcfg(port, 0x81); if (!(reg & 0x03)) /* Disabled */ - return 0; + return -ENODEV; for (i = 0; i < 2 ; i ++) { unsigned long cmd_port = 0x1F0 - (0x80 * i); -- cgit v1.2.3-59-g8ed1b From 5e8f757cb2e0f67bf43f71d5180a8bf0ab3484eb Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 19 Jan 2008 16:07:58 +0000 Subject: ata_generic: Cenatek support Not much to do here. It's an ata memory as disk. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/ata_generic.c | 7 ++++++- include/linux/pci_ids.h | 3 +++ 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index d11a4f1fe86a..20534202fc79 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -26,7 +26,7 @@ #include #define DRV_NAME "ata_generic" -#define DRV_VERSION "0.2.13" +#define DRV_VERSION "0.2.15" /* * A generic parallel ATA driver using libata @@ -48,11 +48,15 @@ static int generic_set_mode(struct ata_link *link, struct ata_device **unused) struct ata_port *ap = link->ap; int dma_enabled = 0; struct ata_device *dev; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); /* Bits 5 and 6 indicate if DMA is active on master/slave */ if (ap->ioaddr.bmdma_addr) dma_enabled = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + if (pdev->vendor == PCI_VENDOR_ID_CENATEK) + dma_enabled = 0xFF; + ata_link_for_each_dev(dev, link) { if (!ata_dev_enabled(dev)) continue; @@ -201,6 +205,7 @@ static struct pci_device_id ata_generic[] = { { PCI_DEVICE(PCI_VENDOR_ID_HINT, PCI_DEVICE_ID_HINT_VXPROII_IDE), }, { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C561), }, { PCI_DEVICE(PCI_VENDOR_ID_OPTI, PCI_DEVICE_ID_OPTI_82C558), }, + { PCI_DEVICE(PCI_VENDOR_ID_CENATEK,PCI_DEVICE_ID_CENATEK_IDE), }, { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO), }, { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), }, { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), }, diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 7f2215139e9a..1fbd0256e86b 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2066,6 +2066,9 @@ #define PCI_VENDOR_ID_NETCELL 0x169c #define PCI_DEVICE_ID_REVOLUTION 0x0044 +#define PCI_VENDOR_ID_CENATEK 0x16CA +#define PCI_DEVICE_ID_CENATEK_IDE 0x0001 + #define PCI_VENDOR_ID_VITESSE 0x1725 #define PCI_DEVICE_ID_VITESSE_VSC7174 0x7174 -- cgit v1.2.3-59-g8ed1b From b832548773b0cd98216534caa31b9ed7607c4e76 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 19 Jan 2008 15:47:23 +0000 Subject: pata_legacy: Merge winbond support This puts winbond VLB in with the other ISA/VLB support and means we can lose pata_winbond.c. With all the VLB/ISA probe in one space (and out of the core libata) this makes legacy probing work sanely. Also switch to devm_ for resource handling on the ports post probe Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/pata_legacy.c | 178 +++++++++++++++++++++++++++++++++++++--------- 1 file changed, 144 insertions(+), 34 deletions(-) diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index c4a939b506c9..333dc15f8ccf 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -28,7 +28,6 @@ * * Unsupported but docs exist: * Appian/Adaptec AIC25VL01/Cirrus Logic PD7220 - * Winbond W83759A * * This driver handles legacy (that is "ISA/VLB side") IDE ports found * on PC class systems. There are three hybrid devices that are exceptions @@ -36,7 +35,7 @@ * the MPIIX where the tuning is PCI side but the IDE is "ISA side". * * Specific support is included for the ht6560a/ht6560b/opti82c611a/ - * opti82c465mv/promise 20230c/20630 + * opti82c465mv/promise 20230c/20630/winbond83759A * * Use the autospeed and pio_mask options with: * Appian ADI/2 aka CLPD7220 or AIC25VL01. @@ -47,9 +46,6 @@ * For now use autospeed and pio_mask as above with the W83759A. This may * change. * - * TODO - * Merge existing pata_qdi driver - * */ #include @@ -64,7 +60,7 @@ #include #define DRV_NAME "pata_legacy" -#define DRV_VERSION "0.5.5" +#define DRV_VERSION "0.6.5" #define NR_HOST 6 @@ -92,6 +88,7 @@ enum controller { QDI6500 = 7, QDI6580 = 8, QDI6580DP = 9, /* Dual channel mode is different */ + W83759A = 10, UNKNOWN = -1 }; @@ -111,7 +108,8 @@ struct legacy_controller { struct ata_port_operations *ops; unsigned int pio_mask; unsigned int flags; - int (*setup)(struct legacy_probe *probe, struct legacy_data *data); + int (*setup)(struct platform_device *, struct legacy_probe *probe, + struct legacy_data *data); }; static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 }; @@ -128,6 +126,8 @@ static int ht6560b; /* HT 6560A on primary 1, second 2, both 3 */ static int opti82c611a; /* Opti82c611A on primary 1, sec 2, both 3 */ static int opti82c46x; /* Opti 82c465MV present(pri/sec autodetect) */ static int qdi; /* Set to probe QDI controllers */ +static int winbond; /* Set to probe Winbond controllers, + give I/O port if non stdanard */ static int autospeed; /* Chip present which snoops speed changes */ static int pio_mask = 0x1F; /* PIO range for autospeed devices */ static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */ @@ -891,9 +891,7 @@ static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc) return ata_qc_issue_prot(qc); } -/* For the 6580 can we flip the FIFO on/off at this point ? */ - -static unsigned int qdi_data_xfer(struct ata_device *adev, unsigned char *buf, +static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int rw) { struct ata_port *ap = adev->link->ap; @@ -922,6 +920,15 @@ static unsigned int qdi_data_xfer(struct ata_device *adev, unsigned char *buf, return ata_data_xfer(adev, buf, buflen, rw); } +static int qdi_port(struct platform_device *dev, + struct legacy_probe *lp, struct legacy_data *ld) +{ + if (devm_request_region(&dev->dev, lp->private, 4, "qdi") == NULL) + return -EBUSY; + ld->timing = lp->private; + return 0; +} + static struct ata_port_operations qdi6500_port_ops = { .set_piomode = qdi6500_set_piomode, @@ -940,7 +947,7 @@ static struct ata_port_operations qdi6500_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = qdi_qc_issue_prot, - .data_xfer = qdi_data_xfer, + .data_xfer = vlb32_data_xfer, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -967,7 +974,7 @@ static struct ata_port_operations qdi6580_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = qdi_data_xfer, + .data_xfer = vlb32_data_xfer, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -994,7 +1001,7 @@ static struct ata_port_operations qdi6580dp_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = qdi_qc_issue_prot, - .data_xfer = qdi_data_xfer, + .data_xfer = vlb32_data_xfer, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -1003,6 +1010,97 @@ static struct ata_port_operations qdi6580dp_port_ops = { .port_start = ata_sff_port_start, }; +static DEFINE_SPINLOCK(winbond_lock); + +static void winbond_writecfg(unsigned long port, u8 reg, u8 val) +{ + unsigned long flags; + spin_lock_irqsave(&winbond_lock, flags); + outb(reg, port + 0x01); + outb(val, port + 0x02); + spin_unlock_irqrestore(&winbond_lock, flags); +} + +static u8 winbond_readcfg(unsigned long port, u8 reg) +{ + u8 val; + + unsigned long flags; + spin_lock_irqsave(&winbond_lock, flags); + outb(reg, port + 0x01); + val = inb(port + 0x02); + spin_unlock_irqrestore(&winbond_lock, flags); + + return val; +} + +static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct ata_timing t; + struct legacy_data *winbond = ap->host->private_data; + int active, recovery; + u8 reg; + int timing = 0x88 + (ap->port_no * 4) + (adev->devno * 2); + + reg = winbond_readcfg(winbond->timing, 0x81); + + /* Get the timing data in cycles */ + if (reg & 0x40) /* Fast VLB bus, assume 50MHz */ + ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000); + else + ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); + + active = (FIT(t.active, 3, 17) - 1) & 0x0F; + recovery = (FIT(t.recover, 1, 15) + 1) & 0x0F; + timing = (active << 4) | recovery; + winbond_writecfg(winbond->timing, timing, reg); + + /* Load the setup timing */ + + reg = 0x35; + if (adev->class != ATA_DEV_ATA) + reg |= 0x08; /* FIFO off */ + if (!ata_pio_need_iordy(adev)) + reg |= 0x02; /* IORDY off */ + reg |= (FIT(t.setup, 0, 3) << 6); + winbond_writecfg(winbond->timing, timing + 1, reg); +} + +static int winbond_port(struct platform_device *dev, + struct legacy_probe *lp, struct legacy_data *ld) +{ + if (devm_request_region(&dev->dev, lp->private, 4, "winbond") == NULL) + return -EBUSY; + ld->timing = lp->private; + return 0; +} + +static struct ata_port_operations winbond_port_ops = { + .set_piomode = winbond_set_piomode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_40wire, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + + .data_xfer = vlb32_data_xfer, + + .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + + .port_start = ata_sff_port_start, +}; + static struct legacy_controller controllers[] = { {"BIOS", &legacy_port_ops, 0x1F, ATA_FLAG_NO_IORDY, NULL }, @@ -1019,11 +1117,13 @@ static struct legacy_controller controllers[] = { {"OPTI82C46X", &opti82c46x_port_ops, 0x0F, 0 , NULL }, {"QDI6500", &qdi6500_port_ops, 0x07, - ATA_FLAG_NO_IORDY, NULL }, + ATA_FLAG_NO_IORDY, qdi_port }, {"QDI6580", &qdi6580_port_ops, 0x1F, - 0 , NULL }, + 0 , qdi_port }, {"QDI6580DP", &qdi6580dp_port_ops, 0x1F, - 0 , NULL } + 0 , qdi_port }, + {"W83759A", &winbond_port_ops, 0x1F, + 0 , winbond_port } }; /** @@ -1034,10 +1134,26 @@ static struct legacy_controller controllers[] = { * check if the controller appears to be driveless at this point. */ -static int probe_chip_type(struct legacy_probe *probe) +static __init int probe_chip_type(struct legacy_probe *probe) { int mask = 1 << probe->slot; + if (winbond && (probe->port == 0x1F0 || probe->port == 0x170)) { + u8 reg = winbond_readcfg(winbond, 0x81); + reg |= 0x80; /* jumpered mode off */ + winbond_writecfg(winbond, 0x81, reg); + reg = winbond_readcfg(winbond, 0x83); + reg |= 0xF0; /* local control */ + winbond_writecfg(winbond, 0x83, reg); + reg = winbond_readcfg(winbond, 0x85); + reg |= 0xF0; /* programmable timing */ + winbond_writecfg(winbond, 0x85, reg); + + reg = winbond_readcfg(winbond, 0x81); + + if (reg & mask) + return W83759A; + } if (probe->port == 0x1F0) { unsigned long flags; local_irq_save(flags); @@ -1127,7 +1243,7 @@ static __init int legacy_init_one(struct legacy_probe *probe) if (!io_addr || !ctrl_addr) goto fail; if (controller->setup) - if (controller->setup(probe, ld) < 0) + if (controller->setup(pdev, probe, ld) < 0) goto fail; host = ata_host_alloc(&pdev->dev, 1); if (!host) @@ -1141,7 +1257,7 @@ static __init int legacy_init_one(struct legacy_probe *probe) ap->ioaddr.altstatus_addr = ctrl_addr; ap->ioaddr.ctl_addr = ctrl_addr; ata_std_ports(&ap->ioaddr); - ap->private_data = ld; + ap->host->private_data = ld; ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, io + 0x0206); @@ -1164,9 +1280,6 @@ static __init int legacy_init_one(struct legacy_probe *probe) fail: if (host) ata_host_detach(host); - /* FIXME: use devm for this */ - if (ld->timing) - release_region(ld->timing, 2); platform_device_unregister(pdev); return ret; } @@ -1184,7 +1297,7 @@ fail: * is the right driver anyway. */ -static void legacy_check_special_cases(struct pci_dev *p, int *primary, +static void __init legacy_check_special_cases(struct pci_dev *p, int *primary, int *secondary) { /* Cyrix CS5510 pre SFF MWDMA ATA on the bridge */ @@ -1249,11 +1362,9 @@ static __init void qdi65_identify_port(u8 r, u8 res, unsigned long port) /* Check card type */ if ((r & 0xF0) == 0xC0) { /* QD6500: single channel */ - if (r & 8) { + if (r & 8) /* Disabled ? */ - release_region(port, 2); return; - } legacy_probe_add(ide_port[r & 0x01], 14 + (r & 0x01), QDI6500, port); } @@ -1273,6 +1384,7 @@ static __init void qdi65_identify_port(u8 r, u8 res, unsigned long port) /* port + 0x02, r & 0x04 */ legacy_probe_add(0x170, 15, QDI6580DP, port + 2); } + release_region(port + 2, 2); } } @@ -1315,11 +1427,9 @@ static __init void probe_qdi_vlb(void) r = inb(port + 1); udelay(1); /* Check port agrees with port set */ - if ((r & 2) >> 1 != i) { - release_region(port, 2); - continue; - } - qdi65_identify_port(r, res, port); + if ((r & 2) >> 1 == i) + qdi65_identify_port(r, res, port); + release_region(port, 2); } } } @@ -1365,6 +1475,9 @@ static __init int legacy_init(void) pci_present = 1; } + if (winbond == 1) + winbond = 0x130; /* Default port, alt is 1B0 */ + if (primary == 0 || all) legacy_probe_add(0x1F0, 14, UNKNOWN, 0); if (secondary == 0 || all) @@ -1383,7 +1496,6 @@ static __init int legacy_init(void) if (qdi) probe_qdi_vlb(); - for (i = 0; i < NR_HOST; i++, pl++) { if (pl->port == 0) continue; @@ -1406,8 +1518,6 @@ static __exit void legacy_exit(void) struct legacy_data *ld = &legacy_data[i]; ata_host_detach(legacy_host[i]); platform_device_unregister(ld->platform_dev); - if (ld->timing) - release_region(ld->timing, 2); } } -- cgit v1.2.3-59-g8ed1b From 7ccd720da3857c21ea893448aaf73620cfe1d27e Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Thu, 17 Jan 2008 11:56:24 -0600 Subject: [libata] Prefer SCSI_SENSE_BUFFERSIZE to sizeof() Signed-off-by: Jeff Garzik --- drivers/ata/libata-scsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 989b7755af3d..3fd08201bef4 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2331,7 +2331,7 @@ static void atapi_request_sense(struct ata_queued_cmd *qc) DPRINTK("ATAPI request sense\n"); /* FIXME: is this needed? */ - memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer)); + memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); ap->ops->tf_read(ap, &qc->tf); -- cgit v1.2.3-59-g8ed1b From a984f58dd97f22f5113700322fed311a0ee29947 Mon Sep 17 00:00:00 2001 From: "akpm@linux-foundation.org" Date: Thu, 17 Jan 2008 11:33:52 -0800 Subject: fix drivers/ata/sata_fsl.c double-decl drivers/ata/sata_fsl.c: In function 'sata_fsl_fill_sg': drivers/ata/sata_fsl.c:337: error: redeclaration of 'si' with no linkage drivers/ata/sata_fsl.c:326: error: previous declaration of 'si' was here Reported-by: Olof Johansson Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/ata/sata_fsl.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index d041709dee1a..922d7b2efba8 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -323,7 +323,6 @@ static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc, struct scatterlist *sg; unsigned int num_prde = 0; u32 ttl_dwords = 0; - unsigned int si; /* * NOTE : direct & indirect prdt's are contigiously allocated -- cgit v1.2.3-59-g8ed1b From acea6852f32b8805e166d885ed7e9f0c7cd10d41 Mon Sep 17 00:00:00 2001 From: Dave Young Date: Mon, 21 Jan 2008 22:35:21 -0800 Subject: [BLUETOOTH]: Move children of connection device to NULL before connection down. The rfcomm tty device will possibly retain even when conn is down, and sysfs doesn't support zombie device moving, so this patch move the tty device before conn device is destroyed. For the bug refered please see : http://lkml.org/lkml/2007/12/28/87 Signed-off-by: Dave Young Signed-off-by: David S. Miller --- net/bluetooth/hci_sysfs.c | 17 +++++++++++++++++ net/bluetooth/rfcomm/tty.c | 3 ++- 2 files changed, 19 insertions(+), 1 deletion(-) diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c index cad510309dcf..17f7fb720553 100644 --- a/net/bluetooth/hci_sysfs.c +++ b/net/bluetooth/hci_sysfs.c @@ -316,9 +316,26 @@ void hci_conn_add_sysfs(struct hci_conn *conn) schedule_work(&conn->work); } +static int __match_tty(struct device *dev, void *data) +{ + /* The rfcomm tty device will possibly retain even when conn + * is down, and sysfs doesn't support move zombie device, + * so we should move the device before conn device is destroyed. + * Due to the only child device of hci_conn dev is rfcomm + * tty_dev, here just return 1 + */ + return 1; +} + static void del_conn(struct work_struct *work) { + struct device *dev; struct hci_conn *conn = container_of(work, struct hci_conn, work); + + while (dev = device_find_child(&conn->dev, NULL, __match_tty)) { + device_move(dev, NULL); + put_device(dev); + } device_del(&conn->dev); put_device(&conn->dev); } diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c index a6a758dd1f7d..788c70321858 100644 --- a/net/bluetooth/rfcomm/tty.c +++ b/net/bluetooth/rfcomm/tty.c @@ -696,7 +696,8 @@ static void rfcomm_tty_close(struct tty_struct *tty, struct file *filp) BT_DBG("tty %p dev %p dlc %p opened %d", tty, dev, dev->dlc, dev->opened); if (--dev->opened == 0) { - device_move(dev->tty_dev, NULL); + if (dev->tty_dev->parent) + device_move(dev->tty_dev, NULL); /* Close DLC and dettach TTY */ rfcomm_dlc_close(dev->dlc, 0); -- cgit v1.2.3-59-g8ed1b From 4c93566e2a61b48ef071a8d8a8fa9904c83a668e Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 21 Jan 2008 23:20:58 -0800 Subject: [TULIP] DMFE: Fix SROM parsing regression. Changeset 16b110c3fd760620b4a787db6ed512fe531ab1b5 (dmfe warning fix) bothed up the offsets read from the SROM so that it doesn't read the same datums it used to. The change made transformations like turning: "srom + 34" into "(__le32 *)srom + 34/4" which doesn't work because 4 does not divide evenly into 34 so we're using a different pointer offset than in the original code. I've changed theses cases in dmfe_parse_srom() to consistently use "(type *)(srom + offset)" preserving the offsets from the original code. Signed-off-by: David S. Miller --- drivers/net/tulip/dmfe.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c index b4891caeae5a..656200472fa1 100644 --- a/drivers/net/tulip/dmfe.c +++ b/drivers/net/tulip/dmfe.c @@ -1909,7 +1909,7 @@ static void dmfe_parse_srom(struct dmfe_board_info * db) if ( ( (int) srom[18] & 0xff) == SROM_V41_CODE) { /* SROM V4.01 */ /* Get NIC support media mode */ - db->NIC_capability = le16_to_cpup((__le16 *)srom + 34/2); + db->NIC_capability = le16_to_cpup((__le16 *) (srom + 34)); db->PHY_reg4 = 0; for (tmp_reg = 1; tmp_reg < 0x10; tmp_reg <<= 1) { switch( db->NIC_capability & tmp_reg ) { @@ -1921,8 +1921,8 @@ static void dmfe_parse_srom(struct dmfe_board_info * db) } /* Media Mode Force or not check */ - dmfe_mode = le32_to_cpup((__le32 *)srom + 34/4) & - le32_to_cpup((__le32 *)srom + 36/4); + dmfe_mode = (le32_to_cpup((__le32 *) (srom + 34)) & + le32_to_cpup((__le32 *) (srom + 36))); switch(dmfe_mode) { case 0x4: dmfe_media_mode = DMFE_100MHF; break; /* 100MHF */ case 0x2: dmfe_media_mode = DMFE_10MFD; break; /* 10MFD */ -- cgit v1.2.3-59-g8ed1b From 1e34a11d55c9437775367d72ad03f9af99e78bd0 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 22 Jan 2008 23:44:31 -0800 Subject: [IPV4]: Add missing skb->truesize increment in ip_append_page(). And as noted by Takahiro Yasui, we thus need to bump the sk->sk_wmem_alloc at this spot as well. Signed-off-by: David S. Miller --- net/ipv4/ip_output.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index fd99fbd685ea..480469b92aa7 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -1172,6 +1172,8 @@ ssize_t ip_append_page(struct sock *sk, struct page *page, skb->len += len; skb->data_len += len; + skb->truesize += len; + atomic_add(len, &sk->sk_wmem_alloc); offset += len; size -= len; } -- cgit v1.2.3-59-g8ed1b From a781cf94e6dcc09bf13e548298185d916d9ff3c8 Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Mon, 21 Jan 2008 10:08:31 -0800 Subject: iwlwifi: fix possible read attempt on ucode that is not available This fixes a NULL pointer dereference that can occur when the ucode is not loaded at the time __iwl_up is called. The problem was reported at http://kerneloops.org/raw.php?rawid=2765&msgid= Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl3945-base.c | 5 +++++ drivers/net/wireless/iwlwifi/iwl4965-base.c | 5 +++++ 2 files changed, 10 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 1a6b0e0edf6f..0b3ec7e4d93b 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -6342,6 +6342,11 @@ static int __iwl_up(struct iwl_priv *priv) return 0; } + if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) { + IWL_ERROR("ucode not available for device bringup\n"); + return -EIO; + } + iwl_write32(priv, CSR_INT, 0xFFFFFFFF); rc = iwl_hw_nic_init(priv); diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index 6cd57c220631..15a45f471710 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -6698,6 +6698,11 @@ static int __iwl_up(struct iwl_priv *priv) return 0; } + if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) { + IWL_ERROR("ucode not available for device bringup\n"); + return -EIO; + } + iwl_write32(priv, CSR_INT, 0xFFFFFFFF); rc = iwl_hw_nic_init(priv); -- cgit v1.2.3-59-g8ed1b From ff4b950277b6534caab2b2b956dba6ce29757551 Mon Sep 17 00:00:00 2001 From: "Denis V. Lunev" Date: Tue, 22 Jan 2008 22:05:33 -0800 Subject: [NETNS]: Re-export init_net via EXPORT_SYMBOL. init_net is used added as a parameter to a lot of old API calls, f.e. ip_dev_find. These calls were exported as EXPORT_SYMBOL. So, export init_net as EXPORT_SYMBOL to keep networking API consistent. Signed-off-by: Denis V. Lunev Signed-off-by: David S. Miller --- net/core/net_namespace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c index 383252b50411..ec936ae92458 100644 --- a/net/core/net_namespace.c +++ b/net/core/net_namespace.c @@ -18,7 +18,7 @@ static DEFINE_MUTEX(net_mutex); LIST_HEAD(net_namespace_list); struct net init_net; -EXPORT_SYMBOL_GPL(init_net); +EXPORT_SYMBOL(init_net); /* * setup_net runs the initializers for the network namespace object. -- cgit v1.2.3-59-g8ed1b From f945fa7ad9c12a3356a3de7fb2143ccc2f2c3bca Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 22 Jan 2008 22:39:26 -0800 Subject: [INET]: Fix truesize setting in ip_append_data As it is ip_append_data only counts page fragments to the skb that allocated it. As such it means that the first skb gets hit with a 4K charge even though it might have only used a fraction of it while all subsequent skb's that use the same page gets away with no charge at all. This bug was exposed by the UDP accounting patch. [ The wmem_alloc bumping needs to be moved with the truesize, noticed by Takahiro Yasui. -DaveM ] Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/ipv4/ip_output.c | 4 ++-- net/ipv6/ip6_output.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 480469b92aa7..bc9e57550e86 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -1016,8 +1016,6 @@ alloc_new_skb: skb_fill_page_desc(skb, i, page, 0, 0); frag = &skb_shinfo(skb)->frags[i]; - skb->truesize += PAGE_SIZE; - atomic_add(PAGE_SIZE, &sk->sk_wmem_alloc); } else { err = -EMSGSIZE; goto error; @@ -1030,6 +1028,8 @@ alloc_new_skb: frag->size += copy; skb->len += copy; skb->data_len += copy; + skb->truesize += copy; + atomic_add(copy, &sk->sk_wmem_alloc); } offset += copy; length -= copy; diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 6338a9c1aa14..3bef30e4a23d 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -1316,8 +1316,6 @@ alloc_new_skb: skb_fill_page_desc(skb, i, page, 0, 0); frag = &skb_shinfo(skb)->frags[i]; - skb->truesize += PAGE_SIZE; - atomic_add(PAGE_SIZE, &sk->sk_wmem_alloc); } else { err = -EMSGSIZE; goto error; @@ -1330,6 +1328,8 @@ alloc_new_skb: frag->size += copy; skb->len += copy; skb->data_len += copy; + skb->truesize += copy; + atomic_add(copy, &sk->sk_wmem_alloc); } offset += copy; length -= copy; -- cgit v1.2.3-59-g8ed1b From ebc71647309539aaf9088f4e41b9f364cce8f7eb Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Tue, 4 Dec 2007 22:58:41 +0100 Subject: sis190: add cmos ram access code for the SiS19x/968 chipset pair More work is needed to handle correctly the PHY of the new devices when connected to a 10Mb link but this change already helps some users as is. Fix for: http://bugzilla.kernel.org/show_bug.cgi?id=9467 Signed-off-by: Francois Romieu Cc: K.M. Liu Cc: J. Gleacher Cc: Alexandre Penasso Teixeira Cc: Arliton Rocha Cc: Juan Jose Pablos Cc: Wipat Srutiprom --- drivers/net/sis190.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index 7eab072ae792..c63f484f9072 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -1549,28 +1549,31 @@ static int __devinit sis190_get_mac_addr_from_eeprom(struct pci_dev *pdev, } /** - * sis190_get_mac_addr_from_apc - Get MAC address for SiS965 model + * sis190_get_mac_addr_from_apc - Get MAC address for SiS96x model * @pdev: PCI device * @dev: network device to get address for * - * SiS965 model, use APC CMOS RAM to store MAC address. + * SiS96x model, use APC CMOS RAM to store MAC address. * APC CMOS RAM is accessed through ISA bridge. * MAC address is read into @net_dev->dev_addr. */ static int __devinit sis190_get_mac_addr_from_apc(struct pci_dev *pdev, struct net_device *dev) { + static const u16 __devinitdata ids[] = { 0x0965, 0x0966, 0x0968 }; struct sis190_private *tp = netdev_priv(dev); struct pci_dev *isa_bridge; u8 reg, tmp8; - int i; + unsigned int i; net_probe(tp, KERN_INFO "%s: Read MAC address from APC.\n", pci_name(pdev)); - isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, 0x0965, NULL); - if (!isa_bridge) - isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, 0x0966, NULL); + for (i = 0; i < ARRAY_SIZE(ids); i++) { + isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, ids[i], NULL); + if (isa_bridge) + break; + } if (!isa_bridge) { net_probe(tp, KERN_INFO "%s: Can not find ISA bridge.\n", -- cgit v1.2.3-59-g8ed1b From 11913d30b9fb985b12835037281ae0483be59623 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 17 Nov 2007 15:55:10 +0100 Subject: sis190: remove duplicate INIT_WORK It is already done in sis190_init_one. Signed-off-by: Francois Romieu Cc: K.M. Liu --- drivers/net/sis190.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index c63f484f9072..92e0eb95ff8c 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -1041,8 +1041,6 @@ static int sis190_open(struct net_device *dev) if (rc < 0) goto err_free_rx_1; - INIT_WORK(&tp->phy_task, sis190_phy_task); - sis190_request_timer(dev); rc = request_irq(dev->irq, sis190_interrupt, IRQF_SHARED, dev->name, dev); -- cgit v1.2.3-59-g8ed1b From 7bf3f232f7c78efee8c4d14ad9af8a5a40304916 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 17 Nov 2007 16:56:43 +0100 Subject: sis190: mdio operation failure is not correctly detected i ranges from 0 to 100 in the 'for' loop a few lines above. Reported by davem. Signed-off-by: Francois Romieu Cc: K.M. Liu --- drivers/net/sis190.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index 92e0eb95ff8c..342a986214c8 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -372,7 +372,7 @@ static void __mdio_cmd(void __iomem *ioaddr, u32 ctl) msleep(1); } - if (i > 999) + if (i > 99) printk(KERN_ERR PFX "PHY command failed !\n"); } -- cgit v1.2.3-59-g8ed1b From b334349eb4c8562fd60bc8a8bd5ba6b42f22b8ac Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sat, 17 Nov 2007 21:29:47 +0100 Subject: sis190: scheduling while atomic error sis190_tx_timeout -> sis190_hw_start -> sis190_soft_reset -> msleep *splat* PCI transactions are correctly flushed here. The msleep() is probably useless. Signed-off-by: Francois Romieu Cc: K.M. Liu --- drivers/net/sis190.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index 342a986214c8..b570402f7fed 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -847,10 +847,8 @@ static void sis190_soft_reset(void __iomem *ioaddr) { SIS_W32(IntrControl, 0x8000); SIS_PCI_COMMIT(); - msleep(1); SIS_W32(IntrControl, 0x0); sis190_asic_down(ioaddr); - msleep(1); } static void sis190_hw_start(struct net_device *dev) -- cgit v1.2.3-59-g8ed1b From d0ad3bc97c06fba5d37b4ca03c03b7eeeda39c47 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Tue, 22 Jan 2008 13:43:48 -0600 Subject: [SCSI] libata: fix corruption induced by relaxed DMA alignment in SCSI Hugh Dickens noticed that SMART commands issued from user space can end up corupting memory. The problem occurs if the buffer used to read data spans two pages. The reason is that the PIO sector routines in libata are expecting physically contiguous pages when they do sector operations, so the left overs on the second page go into the next physically adjacent page rather than the next page in the sg mapping. Fix this by enforcing strict 512 byte alignment on all buffers from userspace. Acked-by: Hugh Dickins Acked-by: Jeff Garzik Signed-off-by: James Bottomley --- drivers/ata/libata-scsi.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 4bb268b9aaeb..bc5cf6b8a4b8 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -824,9 +824,6 @@ static void ata_scsi_sdev_config(struct scsi_device *sdev) * requests. */ sdev->max_device_blocked = 1; - - /* set the min alignment */ - blk_queue_update_dma_alignment(sdev->request_queue, ATA_DMA_PAD_SZ - 1); } static void ata_scsi_dev_config(struct scsi_device *sdev, @@ -842,7 +839,14 @@ static void ata_scsi_dev_config(struct scsi_device *sdev, if (dev->class == ATA_DEV_ATAPI) { struct request_queue *q = sdev->request_queue; blk_queue_max_hw_segments(q, q->max_hw_segments - 1); - } + + /* set the min alignment */ + blk_queue_update_dma_alignment(sdev->request_queue, + ATA_DMA_PAD_SZ - 1); + } else + /* ATA devices must be sector aligned */ + blk_queue_update_dma_alignment(sdev->request_queue, + ATA_SECT_SIZE - 1); if (dev->flags & ATA_DFLAG_AN) set_bit(SDEV_EVT_MEDIA_CHANGE, sdev->supported_events); -- cgit v1.2.3-59-g8ed1b From 11f24fbdf511cf588c3a18e3208ee02d85db0020 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Wed, 2 Jan 2008 18:44:05 -0600 Subject: [SCSI] sysfs: fix the sysfs_add_file_to_group interfaces I can't see a reason why these shouldn't work on every group. However, they only seem to work on named groups. This patch allows the group functions to work on anonymous groups (those with NULL names). Acked-by: Tejun Heo Acked-by: Kay Sievers Acked-by: Greg Kroah-Hartman Signed-off-by: James Bottomley --- fs/sysfs/file.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c index 4045bdcc4b33..b834f1709f9f 100644 --- a/fs/sysfs/file.c +++ b/fs/sysfs/file.c @@ -568,7 +568,11 @@ int sysfs_add_file_to_group(struct kobject *kobj, struct sysfs_dirent *dir_sd; int error; - dir_sd = sysfs_get_dirent(kobj->sd, group); + if (group) + dir_sd = sysfs_get_dirent(kobj->sd, group); + else + dir_sd = sysfs_get(kobj->sd); + if (!dir_sd) return -ENOENT; @@ -656,7 +660,10 @@ void sysfs_remove_file_from_group(struct kobject *kobj, { struct sysfs_dirent *dir_sd; - dir_sd = sysfs_get_dirent(kobj->sd, group); + if (group) + dir_sd = sysfs_get_dirent(kobj->sd, group); + else + dir_sd = sysfs_get(kobj->sd); if (dir_sd) { sysfs_hash_and_remove(dir_sd, attr->name); sysfs_put(dir_sd); -- cgit v1.2.3-59-g8ed1b From fd1109711d7f76126e7cef947999f139b198dc15 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Wed, 2 Jan 2008 18:48:47 -0600 Subject: [SCSI] attribute_container: update to use the group interface This patch is the beginning of moving the attribute_containers to use attribute groups exclusively. The attr element is now deprecated and will eventually be removed (along with all the hand rolled code for doing exactly what attribute groups do) when all the consumers are converted to attribute groups. Acked-by: Greg Kroah-Hartman Signed-off-by: James Bottomley --- drivers/base/attribute_container.c | 14 ++++++++++++-- include/linux/attribute_container.h | 1 + 2 files changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/base/attribute_container.c b/drivers/base/attribute_container.c index 7370d7cf5988..5bf25c6f966c 100644 --- a/drivers/base/attribute_container.c +++ b/drivers/base/attribute_container.c @@ -320,9 +320,14 @@ attribute_container_add_attrs(struct class_device *classdev) struct class_device_attribute **attrs = cont->attrs; int i, error; - if (!attrs) + BUG_ON(attrs && cont->grp); + + if (!attrs && !cont->grp) return 0; + if (cont->grp) + return sysfs_create_group(&classdev->kobj, cont->grp); + for (i = 0; attrs[i]; i++) { error = class_device_create_file(classdev, attrs[i]); if (error) @@ -378,9 +383,14 @@ attribute_container_remove_attrs(struct class_device *classdev) struct class_device_attribute **attrs = cont->attrs; int i; - if (!attrs) + if (!attrs && !cont->grp) return; + if (cont->grp) { + sysfs_remove_group(&classdev->kobj, cont->grp); + return ; + } + for (i = 0; attrs[i]; i++) class_device_remove_file(classdev, attrs[i]); } diff --git a/include/linux/attribute_container.h b/include/linux/attribute_container.h index 8ff274933948..f5582332af04 100644 --- a/include/linux/attribute_container.h +++ b/include/linux/attribute_container.h @@ -17,6 +17,7 @@ struct attribute_container { struct list_head node; struct klist containers; struct class *class; + struct attribute_group *grp; struct class_device_attribute **attrs; int (*match)(struct attribute_container *, struct device *); #define ATTRIBUTE_CONTAINER_NO_CLASSDEVS 0x01 -- cgit v1.2.3-59-g8ed1b From d52b3815a52456dcf1a45fbc344e23bb643b2bda Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sat, 5 Jan 2008 09:38:30 -0600 Subject: [SCSI] add missing transport configure points for target and host While trying to convert the SPI transport class to attribute groups, I discovered that we don't actually have any transport configure points for either the target or the host. This patch adds these missing transport class triggers. The host one is simply done after the add, the target one tries to be more clever and add it after devices may have been placed on the target (so the device configure will have set up the target parameters). Signed-off-by: James Bottomley --- drivers/scsi/scsi_scan.c | 2 ++ drivers/scsi/scsi_sysfs.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index ada72af0a6dd..1dc165ad17fb 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -1489,6 +1489,7 @@ struct scsi_device *__scsi_add_device(struct Scsi_Host *shost, uint channel, if (scsi_host_scan_allowed(shost)) scsi_probe_and_add_lun(starget, lun, NULL, &sdev, 1, hostdata); mutex_unlock(&shost->scan_mutex); + transport_configure_device(&starget->dev); scsi_target_reap(starget); put_device(&starget->dev); @@ -1569,6 +1570,7 @@ static void __scsi_scan_target(struct device *parent, unsigned int channel, out_reap: /* now determine if the target has any children at all * and if not, nuke it */ + transport_configure_device(&starget->dev); scsi_target_reap(starget); put_device(&starget->dev); diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index 00b386677392..ed83cdb6e67d 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -1018,6 +1018,7 @@ int scsi_sysfs_add_host(struct Scsi_Host *shost) } transport_register_device(&shost->shost_gendev); + transport_configure_device(&shost->shost_gendev); return 0; } -- cgit v1.2.3-59-g8ed1b From d4acd722b7bb5f48b9fc3848e8c2a845b100d84f Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Wed, 31 Oct 2007 09:38:04 -0500 Subject: [SCSI] sysfs: add filter function to groups This patch allows the various users of attribute_groups to selectively allow the appearance of group attributes. The primary consumer of this will be the transport classes in which we currently have elaborate attribute selection algorithms to do this same thing. Acked-by: Greg KH Signed-off-by: James Bottomley --- fs/sysfs/group.c | 26 ++++++++++++++++---------- include/linux/sysfs.h | 2 ++ kernel/params.c | 2 +- 3 files changed, 19 insertions(+), 11 deletions(-) diff --git a/fs/sysfs/group.c b/fs/sysfs/group.c index d1972374655a..0871c3dadce1 100644 --- a/fs/sysfs/group.c +++ b/fs/sysfs/group.c @@ -16,25 +16,31 @@ #include "sysfs.h" -static void remove_files(struct sysfs_dirent *dir_sd, +static void remove_files(struct sysfs_dirent *dir_sd, struct kobject *kobj, const struct attribute_group *grp) { struct attribute *const* attr; + int i; - for (attr = grp->attrs; *attr; attr++) - sysfs_hash_and_remove(dir_sd, (*attr)->name); + for (i = 0, attr = grp->attrs; *attr; i++, attr++) + if (!grp->is_visible || + grp->is_visible(kobj, *attr, i)) + sysfs_hash_and_remove(dir_sd, (*attr)->name); } -static int create_files(struct sysfs_dirent *dir_sd, +static int create_files(struct sysfs_dirent *dir_sd, struct kobject *kobj, const struct attribute_group *grp) { struct attribute *const* attr; - int error = 0; + int error = 0, i; - for (attr = grp->attrs; *attr && !error; attr++) - error = sysfs_add_file(dir_sd, *attr, SYSFS_KOBJ_ATTR); + for (i = 0, attr = grp->attrs; *attr && !error; i++, attr++) + if (!grp->is_visible || + grp->is_visible(kobj, *attr, i)) + error |= + sysfs_add_file(dir_sd, *attr, SYSFS_KOBJ_ATTR); if (error) - remove_files(dir_sd, grp); + remove_files(dir_sd, kobj, grp); return error; } @@ -54,7 +60,7 @@ int sysfs_create_group(struct kobject * kobj, } else sd = kobj->sd; sysfs_get(sd); - error = create_files(sd, grp); + error = create_files(sd, kobj, grp); if (error) { if (grp->name) sysfs_remove_subdir(sd); @@ -75,7 +81,7 @@ void sysfs_remove_group(struct kobject * kobj, } else sd = sysfs_get(dir_sd); - remove_files(sd, grp); + remove_files(sd, kobj, grp); if (grp->name) sysfs_remove_subdir(sd); diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h index 149ab62329e2..802710438a9e 100644 --- a/include/linux/sysfs.h +++ b/include/linux/sysfs.h @@ -32,6 +32,8 @@ struct attribute { struct attribute_group { const char *name; + int (*is_visible)(struct kobject *, + struct attribute *, int); struct attribute **attrs; }; diff --git a/kernel/params.c b/kernel/params.c index 7686417ee00e..dfef46474e55 100644 --- a/kernel/params.c +++ b/kernel/params.c @@ -472,7 +472,7 @@ param_sysfs_setup(struct module_kobject *mk, sizeof(mp->grp.attrs[0])); size[1] = (valid_attrs + 1) * sizeof(mp->grp.attrs[0]); - mp = kmalloc(size[0] + size[1], GFP_KERNEL); + mp = kzalloc(size[0] + size[1], GFP_KERNEL); if (!mp) return ERR_PTR(-ENOMEM); -- cgit v1.2.3-59-g8ed1b From 9b161a4d3e83518323ce13822e55de70c630aa65 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sat, 5 Jan 2008 10:18:27 -0600 Subject: [SCSI] scsi_transport_spi: convert to attribute groups This conversion makes full use of the is_visible() callback on attribute groups. Now, each device appears only with its capability flags in the transport class directory. Previously each device appeared with the capability of the host, so this is a functionality improvement. Converting to attribute groups allows us to sweep away most of the home grown #defines that were effectively doing the same thing. Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_spi.c | 258 ++++++++++++++++++++++++++------------ 1 file changed, 176 insertions(+), 82 deletions(-) diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c index 4df21c92ff1e..1fb60313a516 100644 --- a/drivers/scsi/scsi_transport_spi.c +++ b/drivers/scsi/scsi_transport_spi.c @@ -52,13 +52,6 @@ struct spi_internal { struct scsi_transport_template t; struct spi_function_template *f; - /* The actual attributes */ - struct class_device_attribute private_attrs[SPI_NUM_ATTRS]; - /* The array of null terminated pointers to attributes - * needed by scsi_sysfs.c */ - struct class_device_attribute *attrs[SPI_NUM_ATTRS + SPI_OTHER_ATTRS + 1]; - struct class_device_attribute private_host_attrs[SPI_HOST_ATTRS]; - struct class_device_attribute *host_attrs[SPI_HOST_ATTRS + 1]; }; #define to_spi_internal(tmpl) container_of(tmpl, struct spi_internal, t) @@ -174,17 +167,20 @@ static int spi_host_setup(struct transport_container *tc, struct device *dev, return 0; } +static int spi_host_configure(struct transport_container *tc, + struct device *dev, + struct class_device *cdev); + static DECLARE_TRANSPORT_CLASS(spi_host_class, "spi_host", spi_host_setup, NULL, - NULL); + spi_host_configure); static int spi_host_match(struct attribute_container *cont, struct device *dev) { struct Scsi_Host *shost; - struct spi_internal *i; if (!scsi_is_host_device(dev)) return 0; @@ -194,11 +190,13 @@ static int spi_host_match(struct attribute_container *cont, != &spi_host_class.class) return 0; - i = to_spi_internal(shost->transportt); - - return &i->t.host_attrs.ac == cont; + return &shost->transportt->host_attrs.ac == cont; } +static int spi_target_configure(struct transport_container *tc, + struct device *dev, + struct class_device *cdev); + static int spi_device_configure(struct transport_container *tc, struct device *dev, struct class_device *cdev) @@ -300,8 +298,10 @@ store_spi_transport_##field(struct class_device *cdev, const char *buf, \ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); \ struct spi_internal *i = to_spi_internal(shost->transportt); \ \ + if (!i->f->set_##field) \ + return -EINVAL; \ val = simple_strtoul(buf, NULL, 0); \ - i->f->set_##field(starget, val); \ + i->f->set_##field(starget, val); \ return count; \ } @@ -317,6 +317,8 @@ store_spi_transport_##field(struct class_device *cdev, const char *buf, \ struct spi_transport_attrs *tp \ = (struct spi_transport_attrs *)&starget->starget_data; \ \ + if (i->f->set_##field) \ + return -EINVAL; \ val = simple_strtoul(buf, NULL, 0); \ if (val > tp->max_##field) \ val = tp->max_##field; \ @@ -327,14 +329,14 @@ store_spi_transport_##field(struct class_device *cdev, const char *buf, \ #define spi_transport_rd_attr(field, format_string) \ spi_transport_show_function(field, format_string) \ spi_transport_store_function(field, format_string) \ -static CLASS_DEVICE_ATTR(field, S_IRUGO | S_IWUSR, \ +static CLASS_DEVICE_ATTR(field, S_IRUGO, \ show_spi_transport_##field, \ store_spi_transport_##field); #define spi_transport_simple_attr(field, format_string) \ spi_transport_show_simple(field, format_string) \ spi_transport_store_simple(field, format_string) \ -static CLASS_DEVICE_ATTR(field, S_IRUGO | S_IWUSR, \ +static CLASS_DEVICE_ATTR(field, S_IRUGO, \ show_spi_transport_##field, \ store_spi_transport_##field); @@ -342,7 +344,7 @@ static CLASS_DEVICE_ATTR(field, S_IRUGO | S_IWUSR, \ spi_transport_show_function(field, format_string) \ spi_transport_store_max(field, format_string) \ spi_transport_simple_attr(max_##field, format_string) \ -static CLASS_DEVICE_ATTR(field, S_IRUGO | S_IWUSR, \ +static CLASS_DEVICE_ATTR(field, S_IRUGO, \ show_spi_transport_##field, \ store_spi_transport_##field); @@ -472,6 +474,9 @@ store_spi_transport_period(struct class_device *cdev, const char *buf, (struct spi_transport_attrs *)&starget->starget_data; int period, retval; + if (!i->f->set_period) + return -EINVAL; + retval = store_spi_transport_period_helper(cdev, buf, count, &period); if (period < tp->min_period) @@ -482,7 +487,7 @@ store_spi_transport_period(struct class_device *cdev, const char *buf, return retval; } -static CLASS_DEVICE_ATTR(period, S_IRUGO | S_IWUSR, +static CLASS_DEVICE_ATTR(period, S_IRUGO, show_spi_transport_period, store_spi_transport_period); @@ -490,9 +495,14 @@ static ssize_t show_spi_transport_min_period(struct class_device *cdev, char *buf) { struct scsi_target *starget = transport_class_to_starget(cdev); + struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); + struct spi_internal *i = to_spi_internal(shost->transportt); struct spi_transport_attrs *tp = (struct spi_transport_attrs *)&starget->starget_data; + if (!i->f->set_period) + return -EINVAL; + return show_spi_transport_period_helper(buf, tp->min_period); } @@ -509,7 +519,7 @@ store_spi_transport_min_period(struct class_device *cdev, const char *buf, } -static CLASS_DEVICE_ATTR(min_period, S_IRUGO | S_IWUSR, +static CLASS_DEVICE_ATTR(min_period, S_IRUGO, show_spi_transport_min_period, store_spi_transport_min_period); @@ -531,12 +541,15 @@ static ssize_t store_spi_host_signalling(struct class_device *cdev, struct spi_internal *i = to_spi_internal(shost->transportt); enum spi_signal_type type = spi_signal_to_value(buf); + if (!i->f->set_signalling) + return -EINVAL; + if (type != SPI_SIGNAL_UNKNOWN) i->f->set_signalling(shost, type); return count; } -static CLASS_DEVICE_ATTR(signalling, S_IRUGO | S_IWUSR, +static CLASS_DEVICE_ATTR(signalling, S_IRUGO, show_spi_host_signalling, store_spi_host_signalling); @@ -1262,35 +1275,6 @@ int spi_print_msg(const unsigned char *msg) EXPORT_SYMBOL(spi_print_msg); #endif /* ! CONFIG_SCSI_CONSTANTS */ -#define SETUP_ATTRIBUTE(field) \ - i->private_attrs[count] = class_device_attr_##field; \ - if (!i->f->set_##field) { \ - i->private_attrs[count].attr.mode = S_IRUGO; \ - i->private_attrs[count].store = NULL; \ - } \ - i->attrs[count] = &i->private_attrs[count]; \ - if (i->f->show_##field) \ - count++ - -#define SETUP_RELATED_ATTRIBUTE(field, rel_field) \ - i->private_attrs[count] = class_device_attr_##field; \ - if (!i->f->set_##rel_field) { \ - i->private_attrs[count].attr.mode = S_IRUGO; \ - i->private_attrs[count].store = NULL; \ - } \ - i->attrs[count] = &i->private_attrs[count]; \ - if (i->f->show_##rel_field) \ - count++ - -#define SETUP_HOST_ATTRIBUTE(field) \ - i->private_host_attrs[count] = class_device_attr_##field; \ - if (!i->f->set_##field) { \ - i->private_host_attrs[count].attr.mode = S_IRUGO; \ - i->private_host_attrs[count].store = NULL; \ - } \ - i->host_attrs[count] = &i->private_host_attrs[count]; \ - count++ - static int spi_device_match(struct attribute_container *cont, struct device *dev) { @@ -1343,16 +1327,156 @@ static DECLARE_TRANSPORT_CLASS(spi_transport_class, "spi_transport", spi_setup_transport_attrs, NULL, - NULL); + spi_target_configure); static DECLARE_ANON_TRANSPORT_CLASS(spi_device_class, spi_device_match, spi_device_configure); +static struct attribute *host_attributes[] = { + &class_device_attr_signalling.attr, + NULL +}; + +static struct attribute_group host_attribute_group = { + .attrs = host_attributes, +}; + +static int spi_host_configure(struct transport_container *tc, + struct device *dev, + struct class_device *cdev) +{ + struct kobject *kobj = &cdev->kobj; + struct Scsi_Host *shost = transport_class_to_shost(cdev); + struct spi_internal *si = to_spi_internal(shost->transportt); + struct attribute *attr = &class_device_attr_signalling.attr; + int rc = 0; + + if (si->f->set_signalling) + rc = sysfs_chmod_file(kobj, attr, attr->mode | S_IWUSR); + + return rc; +} + +/* returns true if we should be showing the variable. Also + * overloads the return by setting 1<<1 if the attribute should + * be writeable */ +#define TARGET_ATTRIBUTE_HELPER(name) \ + (si->f->show_##name ? 1 : 0) + \ + (si->f->set_##name ? 2 : 0) + +static int target_attribute_is_visible(struct kobject *kobj, + struct attribute *attr, int i) +{ + struct class_device *cdev = + container_of(kobj, struct class_device, kobj); + struct scsi_target *starget = transport_class_to_starget(cdev); + struct Scsi_Host *shost = transport_class_to_shost(cdev); + struct spi_internal *si = to_spi_internal(shost->transportt); + + if (attr == &class_device_attr_period.attr && + spi_support_sync(starget)) + return TARGET_ATTRIBUTE_HELPER(period); + else if (attr == &class_device_attr_min_period.attr && + spi_support_sync(starget)) + return TARGET_ATTRIBUTE_HELPER(period); + else if (attr == &class_device_attr_offset.attr && + spi_support_sync(starget)) + return TARGET_ATTRIBUTE_HELPER(offset); + else if (attr == &class_device_attr_max_offset.attr && + spi_support_sync(starget)) + return TARGET_ATTRIBUTE_HELPER(offset); + else if (attr == &class_device_attr_width.attr && + spi_support_wide(starget)) + return TARGET_ATTRIBUTE_HELPER(width); + else if (attr == &class_device_attr_max_width.attr && + spi_support_wide(starget)) + return TARGET_ATTRIBUTE_HELPER(width); + else if (attr == &class_device_attr_iu.attr && + spi_support_ius(starget)) + return TARGET_ATTRIBUTE_HELPER(iu); + else if (attr == &class_device_attr_dt.attr && + spi_support_dt(starget)) + return TARGET_ATTRIBUTE_HELPER(dt); + else if (attr == &class_device_attr_qas.attr && + spi_support_qas(starget)) + return TARGET_ATTRIBUTE_HELPER(qas); + else if (attr == &class_device_attr_wr_flow.attr && + spi_support_ius(starget)) + return TARGET_ATTRIBUTE_HELPER(wr_flow); + else if (attr == &class_device_attr_rd_strm.attr && + spi_support_ius(starget)) + return TARGET_ATTRIBUTE_HELPER(rd_strm); + else if (attr == &class_device_attr_rti.attr && + spi_support_ius(starget)) + return TARGET_ATTRIBUTE_HELPER(rti); + else if (attr == &class_device_attr_pcomp_en.attr && + spi_support_ius(starget)) + return TARGET_ATTRIBUTE_HELPER(pcomp_en); + else if (attr == &class_device_attr_hold_mcs.attr && + spi_support_ius(starget)) + return TARGET_ATTRIBUTE_HELPER(hold_mcs); + else if (attr == &class_device_attr_revalidate.attr) + return 1; + + return 0; +} + +static struct attribute *target_attributes[] = { + &class_device_attr_period.attr, + &class_device_attr_min_period.attr, + &class_device_attr_offset.attr, + &class_device_attr_max_offset.attr, + &class_device_attr_width.attr, + &class_device_attr_max_width.attr, + &class_device_attr_iu.attr, + &class_device_attr_dt.attr, + &class_device_attr_qas.attr, + &class_device_attr_wr_flow.attr, + &class_device_attr_rd_strm.attr, + &class_device_attr_rti.attr, + &class_device_attr_pcomp_en.attr, + &class_device_attr_hold_mcs.attr, + &class_device_attr_revalidate.attr, + NULL +}; + +static struct attribute_group target_attribute_group = { + .attrs = target_attributes, + .is_visible = target_attribute_is_visible, +}; + +static int spi_target_configure(struct transport_container *tc, + struct device *dev, + struct class_device *cdev) +{ + struct kobject *kobj = &cdev->kobj; + int i; + struct attribute *attr; + int rc; + + for (i = 0; (attr = target_attributes[i]) != NULL; i++) { + int j = target_attribute_group.is_visible(kobj, attr, i); + + /* FIXME: as well as returning -EEXIST, which we'd like + * to ignore, sysfs also does a WARN_ON and dumps a trace, + * which is bad, so temporarily, skip attributes that are + * already visible (the revalidate one) */ + if (j && attr != &class_device_attr_revalidate.attr) + rc = sysfs_add_file_to_group(kobj, attr, + target_attribute_group.name); + /* and make the attribute writeable if we have a set + * function */ + if ((j & 1)) + rc = sysfs_chmod_file(kobj, attr, attr->mode | S_IWUSR); + } + + return 0; +} + struct scsi_transport_template * spi_attach_transport(struct spi_function_template *ft) { - int count = 0; struct spi_internal *i = kzalloc(sizeof(struct spi_internal), GFP_KERNEL); @@ -1360,47 +1484,17 @@ spi_attach_transport(struct spi_function_template *ft) return NULL; i->t.target_attrs.ac.class = &spi_transport_class.class; - i->t.target_attrs.ac.attrs = &i->attrs[0]; + i->t.target_attrs.ac.grp = &target_attribute_group; i->t.target_attrs.ac.match = spi_target_match; transport_container_register(&i->t.target_attrs); i->t.target_size = sizeof(struct spi_transport_attrs); i->t.host_attrs.ac.class = &spi_host_class.class; - i->t.host_attrs.ac.attrs = &i->host_attrs[0]; + i->t.host_attrs.ac.grp = &host_attribute_group; i->t.host_attrs.ac.match = spi_host_match; transport_container_register(&i->t.host_attrs); i->t.host_size = sizeof(struct spi_host_attrs); i->f = ft; - SETUP_ATTRIBUTE(period); - SETUP_RELATED_ATTRIBUTE(min_period, period); - SETUP_ATTRIBUTE(offset); - SETUP_RELATED_ATTRIBUTE(max_offset, offset); - SETUP_ATTRIBUTE(width); - SETUP_RELATED_ATTRIBUTE(max_width, width); - SETUP_ATTRIBUTE(iu); - SETUP_ATTRIBUTE(dt); - SETUP_ATTRIBUTE(qas); - SETUP_ATTRIBUTE(wr_flow); - SETUP_ATTRIBUTE(rd_strm); - SETUP_ATTRIBUTE(rti); - SETUP_ATTRIBUTE(pcomp_en); - SETUP_ATTRIBUTE(hold_mcs); - - /* if you add an attribute but forget to increase SPI_NUM_ATTRS - * this bug will trigger */ - BUG_ON(count > SPI_NUM_ATTRS); - - i->attrs[count++] = &class_device_attr_revalidate; - - i->attrs[count] = NULL; - - count = 0; - SETUP_HOST_ATTRIBUTE(signalling); - - BUG_ON(count > SPI_HOST_ATTRS); - - i->host_attrs[count] = NULL; - return &i->t; } EXPORT_SYMBOL(spi_attach_transport); -- cgit v1.2.3-59-g8ed1b From 95e852e1ef165560e85d3012127068c8f08b19a1 Mon Sep 17 00:00:00 2001 From: "Salyzyn, Mark" Date: Tue, 8 Jan 2008 12:01:07 -0800 Subject: [SCSI] aacraid: add parameter to control FUA and SYNCHRONIZE_CACHE policy aacraid.cache parameter, Disable Queue Flush commands: bit 0 - Disable FUA in WRITE SCSI commands bit 1 - Disable SYNCHRONIZE_CACHE SCSI command bit 2 - Disable only if Battery not protecting adapter supplied Cache e.g.: aacraid.cache=7 will disable the FUA and SYNCHRONIZE_CACHE commands if the adapter has reported that it's cache is battery backed up. This parameter permits experimentation with tradeoffs between performance and caching policy. Signed-off-by: Mark Salyzyn Signed-off-by: James Bottomley --- drivers/scsi/aacraid/aachba.c | 36 ++++++++++++++++++++++++------------ drivers/scsi/aacraid/aacraid.h | 2 ++ drivers/scsi/aacraid/commsup.c | 4 ++++ 3 files changed, 30 insertions(+), 12 deletions(-) diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index cef764eba307..43d6aff460d2 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -144,6 +144,7 @@ static char *aac_get_status_string(u32 status); */ static int nondasd = -1; +static int aac_cache = 0; static int dacmode = -1; int aac_commit = -1; @@ -152,6 +153,8 @@ int aif_timeout = 120; module_param(nondasd, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(nondasd, "Control scanning of hba for nondasd devices. 0=off, 1=on"); +module_param_named(cache, aac_cache, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(cache, "Disable Queue Flush commands:\n\tbit 0 - Disable FUA in WRITE SCSI commands\n\tbit 1 - Disable SYNCHRONIZE_CACHE SCSI command\n\tbit 2 - Disable only if Battery not protecting Cache"); module_param(dacmode, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(dacmode, "Control whether dma addressing is using 64 bit DAC. 0=off, 1=on"); module_param_named(commit, aac_commit, int, S_IRUGO|S_IWUSR); @@ -1013,7 +1016,8 @@ static int aac_write_raw_io(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u writecmd->block[1] = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32)); writecmd->count = cpu_to_le32(count<<9); writecmd->cid = cpu_to_le16(scmd_id(cmd)); - writecmd->flags = fua ? + writecmd->flags = (fua && ((aac_cache & 5) != 1) && + (((aac_cache & 5) != 5) || !fib->dev->cache_protected)) ? cpu_to_le16(IO_TYPE_WRITE|IO_SUREWRITE) : cpu_to_le16(IO_TYPE_WRITE); writecmd->bpTotal = 0; @@ -1325,11 +1329,11 @@ int aac_get_adapter_info(struct aac_dev* dev) } } + dev->cache_protected = 0; dev->nondasd_support = 0; dev->raid_scsi_mode = 0; - if(dev->adapter_info.options & AAC_OPT_NONDASD){ + if(dev->adapter_info.options & AAC_OPT_NONDASD) dev->nondasd_support = 1; - } /* * If the firmware supports ROMB RAID/SCSI mode and we are currently @@ -1351,10 +1355,9 @@ int aac_get_adapter_info(struct aac_dev* dev) printk(KERN_INFO "%s%d: ROMB RAID/SCSI mode enabled\n", dev->name, dev->id); - if(nondasd != -1) { + if (nondasd != -1) dev->nondasd_support = (nondasd!=0); - } - if(dev->nondasd_support != 0){ + if(dev->nondasd_support != 0) { printk(KERN_INFO "%s%d: Non-DASD support enabled.\n",dev->name, dev->id); } @@ -2106,7 +2109,7 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) mode_buf[2] = 0; /* Device-specific param, bit 8: 0/1 = write enabled/protected bit 4: 0/1 = FUA enabled */ - if (dev->raw_io_interface) + if (dev->raw_io_interface && ((aac_cache & 5) != 1)) mode_buf[2] = 0x10; mode_buf[3] = 0; /* Block descriptor length */ if (((scsicmd->cmnd[2] & 0x3f) == 8) || @@ -2114,7 +2117,8 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) mode_buf[0] = 6; mode_buf[4] = 8; mode_buf[5] = 1; - mode_buf[6] = 0x04; /* WCE */ + mode_buf[6] = ((aac_cache & 6) == 2) + ? 0 : 0x04; /* WCE */ mode_buf_length = 7; if (mode_buf_length > scsicmd->cmnd[4]) mode_buf_length = scsicmd->cmnd[4]; @@ -2137,7 +2141,7 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) mode_buf[3] = 0; /* Device-specific param, bit 8: 0/1 = write enabled/protected bit 4: 0/1 = FUA enabled */ - if (dev->raw_io_interface) + if (dev->raw_io_interface && ((aac_cache & 5) != 1)) mode_buf[3] = 0x10; mode_buf[4] = 0; /* reserved */ mode_buf[5] = 0; /* reserved */ @@ -2148,7 +2152,8 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) mode_buf[1] = 9; mode_buf[8] = 8; mode_buf[9] = 1; - mode_buf[10] = 0x04; /* WCE */ + mode_buf[10] = ((aac_cache & 6) == 2) + ? 0 : 0x04; /* WCE */ mode_buf_length = 11; if (mode_buf_length > scsicmd->cmnd[8]) mode_buf_length = scsicmd->cmnd[8]; @@ -2224,9 +2229,16 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) return aac_write(scsicmd); case SYNCHRONIZE_CACHE: + if (((aac_cache & 6) == 6) && dev->cache_protected) { + scsicmd->result = DID_OK << 16 | + COMMAND_COMPLETE << 8 | SAM_STAT_GOOD; + scsicmd->scsi_done(scsicmd); + return 0; + } /* Issue FIB to tell Firmware to flush it's cache */ - return aac_synchronize(scsicmd); - + if ((aac_cache & 6) != 2) + return aac_synchronize(scsicmd); + /* FALLTHRU */ default: /* * Unhandled commands diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 734623af9c45..7bb3d9fde713 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -1016,6 +1016,7 @@ struct aac_dev * lets break them out so we don't have to do an AND to check them */ u8 nondasd_support; + u8 cache_protected; u8 dac_support; u8 raid_scsi_mode; u8 comm_interface; @@ -1770,6 +1771,7 @@ extern struct aac_common aac_config; #define AifEnConfigChange 3 /* Adapter configuration change */ #define AifEnContainerChange 4 /* Container configuration change */ #define AifEnDeviceFailure 5 /* SCSI device failed */ +#define AifEnBatteryEvent 14 /* Change in Battery State */ #define AifEnAddContainer 15 /* A new array was created */ #define AifEnDeleteContainer 16 /* A container was deleted */ #define AifEnExpEvent 23 /* Firmware Event Log */ diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index 53d415e812ee..81cdac166d4b 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -849,6 +849,10 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr) case AifCmdEventNotify: switch (le32_to_cpu(((__le32 *)aifcmd->data)[0])) { + case AifEnBatteryEvent: + dev->cache_protected = + (((__le32 *)aifcmd->data)[1] == cpu_to_le32(3)); + break; /* * Add an Array. */ -- cgit v1.2.3-59-g8ed1b From 17eaaceef52b1ce5ca061d49a1ff9ae56ccce1e1 Mon Sep 17 00:00:00 2001 From: "Salyzyn, Mark" Date: Tue, 8 Jan 2008 12:23:49 -0800 Subject: [SCSI] aacraid: add sysfs report of RAID level Report the RAID level string for the SCSI device representing the array. Report is in /sys/class/scsi_device/#:#:#:#/device/level. Signed-off-by: Mark Salyzyn Signed-off-by: James Bottomley --- drivers/scsi/aacraid/aachba.c | 7 ++++++- drivers/scsi/aacraid/aacraid.h | 1 + drivers/scsi/aacraid/linit.c | 25 +++++++++++++++++++++++++ 3 files changed, 32 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index 43d6aff460d2..eee65c145cb8 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -690,7 +690,12 @@ static char *container_types[] = { "Unknown" }; - +char * get_container_type(unsigned tindex) +{ + if (tindex >= ARRAY_SIZE(container_types)) + tindex = ARRAY_SIZE(container_types) - 1; + return container_types[tindex]; +} /* Function: setinqstr * diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 7bb3d9fde713..6d4e24cea3dc 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -1869,6 +1869,7 @@ int aac_probe_container(struct aac_dev *dev, int cid); int _aac_rx_init(struct aac_dev *dev); int aac_rx_select_comm(struct aac_dev *dev, int comm); int aac_rx_deliver_producer(struct fib * fib); +char * get_container_type(unsigned type); extern int numacb; extern int acbsize; extern char aac_driver_version[]; diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index b4ad9effcf50..e6bdc930d528 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -487,6 +487,30 @@ static int aac_change_queue_depth(struct scsi_device *sdev, int depth) return sdev->queue_depth; } +static ssize_t aac_show_raid_level(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct scsi_device * sdev = to_scsi_device(dev); + if (sdev_channel(sdev) != CONTAINER_CHANNEL) + return snprintf(buf, PAGE_SIZE, sdev->no_uld_attach + ? "Hidden\n" : "JBOD"); + return snprintf(buf, PAGE_SIZE, "%s\n", + get_container_type(((struct aac_dev *)(sdev->host->hostdata)) + ->fsa_dev[sdev_id(sdev)].type)); +} + +static struct device_attribute aac_raid_level_attr = { + .attr = { + .name = "level", + .mode = S_IRUGO, + }, + .show = aac_show_raid_level +}; + +static struct device_attribute *aac_dev_attrs[] = { + &aac_raid_level_attr, + NULL, +}; + static int aac_ioctl(struct scsi_device *sdev, int cmd, void __user * arg) { struct aac_dev *dev = (struct aac_dev *)sdev->host->hostdata; @@ -941,6 +965,7 @@ static struct scsi_host_template aac_driver_template = { .shost_attrs = aac_attrs, .slave_configure = aac_slave_configure, .change_queue_depth = aac_change_queue_depth, + .sdev_attrs = aac_dev_attrs, .eh_abort_handler = aac_eh_abort, .eh_host_reset_handler = aac_eh_reset, .can_queue = AAC_NUM_IO_FIB, -- cgit v1.2.3-59-g8ed1b From 06a43d1725f59a0f5e043bd06081c44ae528098e Mon Sep 17 00:00:00 2001 From: "Salyzyn, Mark" Date: Tue, 8 Jan 2008 12:32:00 -0800 Subject: [SCSI] aacraid: variable redefinition hides earlier warning The parameter 'info' is reused, renamed the second to sinfo to represent supplemental adapter info, to suppress compile warning message. Signed-off-by: Mark Salyzyn Signed-off-by: James Bottomley --- drivers/scsi/aacraid/aachba.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index eee65c145cb8..94577c03a23a 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -1240,24 +1240,24 @@ int aac_get_adapter_info(struct aac_dev* dev) memcpy(&dev->adapter_info, info, sizeof(*info)); if (dev->adapter_info.options & AAC_OPT_SUPPLEMENT_ADAPTER_INFO) { - struct aac_supplement_adapter_info * info; + struct aac_supplement_adapter_info * sinfo; aac_fib_init(fibptr); - info = (struct aac_supplement_adapter_info *) fib_data(fibptr); + sinfo = (struct aac_supplement_adapter_info *) fib_data(fibptr); - memset(info,0,sizeof(*info)); + memset(sinfo,0,sizeof(*sinfo)); rcode = aac_fib_send(RequestSupplementAdapterInfo, fibptr, - sizeof(*info), + sizeof(*sinfo), FsaNormal, 1, 1, NULL, NULL); if (rcode >= 0) - memcpy(&dev->supplement_adapter_info, info, sizeof(*info)); + memcpy(&dev->supplement_adapter_info, sinfo, sizeof(*sinfo)); } -- cgit v1.2.3-59-g8ed1b From a3940da5e6fe8b833eecdbca3fac9456b4204d6e Mon Sep 17 00:00:00 2001 From: "Salyzyn, Mark" Date: Tue, 8 Jan 2008 12:48:25 -0800 Subject: [SCSI] aacraid: fix big endian issues Big endian systems issues discovered in the aacraid driver. Somewhat reverses a patch from November 7th of last year that removed swap operations because they formerly were being assigned to an u8 array when they should have been assigned to an le32 array. This patch is largely inert for any little endian processor architecture. It resolves a bug in delivering the BlinkLED AIF event to registered applications when the adapter or associated hardware was reset due to ill health. A rare corner case occurrence, also largely unnoticed by any as it was a new (untested!) feature. Signed-off-by: Mark Salyzyn Signed-off-by: James Bottomley --- drivers/scsi/aacraid/aachba.c | 7 +++---- drivers/scsi/aacraid/aacraid.h | 6 +++--- drivers/scsi/aacraid/comminit.c | 4 ++-- drivers/scsi/aacraid/commsup.c | 17 ++++++++--------- drivers/scsi/aacraid/linit.c | 10 +++++----- drivers/scsi/aacraid/rx.c | 2 +- 6 files changed, 22 insertions(+), 24 deletions(-) diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index 94577c03a23a..3cddcc0901b2 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -1325,10 +1325,9 @@ int aac_get_adapter_info(struct aac_dev* dev) (int)sizeof(dev->supplement_adapter_info.VpdInfo.Tsid), dev->supplement_adapter_info.VpdInfo.Tsid); } - if (!aac_check_reset || - ((aac_check_reset != 1) && - (dev->supplement_adapter_info.SupportedOptions2 & - cpu_to_le32(AAC_OPTION_IGNORE_RESET)))) { + if (!aac_check_reset || ((aac_check_reset != 1) && + (dev->supplement_adapter_info.SupportedOptions2 & + AAC_OPTION_IGNORE_RESET))) { printk(KERN_INFO "%s%d: Reset Adapter Ignored\n", dev->name, dev->id); } diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 6d4e24cea3dc..07def7261004 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -869,9 +869,9 @@ struct aac_supplement_adapter_info __le32 SupportedOptions2; __le32 ReservedGrowth[1]; }; -#define AAC_FEATURE_FALCON 0x00000010 -#define AAC_OPTION_MU_RESET 0x00000001 -#define AAC_OPTION_IGNORE_RESET 0x00000002 +#define AAC_FEATURE_FALCON cpu_to_le32(0x00000010) +#define AAC_OPTION_MU_RESET cpu_to_le32(0x00000001) +#define AAC_OPTION_IGNORE_RESET cpu_to_le32(0x00000002) #define AAC_SIS_VERSION_V3 3 #define AAC_SIS_SLOT_UNKNOWN 0xFF diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c index 8736813a0296..89cc8b7b42a2 100644 --- a/drivers/scsi/aacraid/comminit.c +++ b/drivers/scsi/aacraid/comminit.c @@ -301,10 +301,10 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev) if ((!aac_adapter_sync_cmd(dev, GET_ADAPTER_PROPERTIES, 0, 0, 0, 0, 0, 0, status+0, status+1, status+2, NULL, NULL)) && (status[0] == 0x00000001)) { - if (status[1] & AAC_OPT_NEW_COMM_64) + if (status[1] & le32_to_cpu(AAC_OPT_NEW_COMM_64)) dev->raw_io_64 = 1; if (dev->a_ops.adapter_comm && - (status[1] & AAC_OPT_NEW_COMM)) + (status[1] & le32_to_cpu(AAC_OPT_NEW_COMM))) dev->comm_interface = AAC_COMM_MESSAGE; if ((dev->comm_interface == AAC_COMM_MESSAGE) && (status[2] > dev->base_size)) { diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index 81cdac166d4b..e82d89ccaf15 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -1343,11 +1343,11 @@ int aac_check_health(struct aac_dev * aac) fib->data = hw_fib->data; aif = (struct aac_aifcmd *)hw_fib->data; aif->command = cpu_to_le32(AifCmdEventNotify); - aif->seqnum = cpu_to_le32(0xFFFFFFFF); - aif->data[0] = AifEnExpEvent; - aif->data[1] = AifExeFirmwarePanic; - aif->data[2] = AifHighPriority; - aif->data[3] = BlinkLED; + aif->seqnum = cpu_to_le32(0xFFFFFFFF); + ((__le32 *)aif->data)[0] = cpu_to_le32(AifEnExpEvent); + ((__le32 *)aif->data)[1] = cpu_to_le32(AifExeFirmwarePanic); + ((__le32 *)aif->data)[2] = cpu_to_le32(AifHighPriority); + ((__le32 *)aif->data)[3] = cpu_to_le32(BlinkLED); /* * Put the FIB onto the @@ -1377,10 +1377,9 @@ int aac_check_health(struct aac_dev * aac) printk(KERN_ERR "%s: Host adapter BLINK LED 0x%x\n", aac->name, BlinkLED); - if (!aac_check_reset || - ((aac_check_reset != 1) && - (aac->supplement_adapter_info.SupportedOptions2 & - cpu_to_le32(AAC_OPTION_IGNORE_RESET)))) + if (!aac_check_reset || ((aac_check_reset != 1) && + (aac->supplement_adapter_info.SupportedOptions2 & + AAC_OPTION_IGNORE_RESET))) goto out; host = aac->scsi_host_ptr; if (aac->thread->pid != current->pid) diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index e6bdc930d528..742e1a8edc60 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -614,11 +614,11 @@ static int aac_eh_reset(struct scsi_cmnd* cmd) * support a register, instead of a commanded, reset. */ if ((aac->supplement_adapter_info.SupportedOptions2 & - cpu_to_le32(AAC_OPTION_MU_RESET)) && - aac_check_reset && - ((aac_check_reset != 1) || - (aac->supplement_adapter_info.SupportedOptions2 & - cpu_to_le32(AAC_OPTION_IGNORE_RESET)))) + AAC_OPTION_MU_RESET) && + aac_check_reset && + ((aac_check_reset != 1) || + (aac->supplement_adapter_info.SupportedOptions2 & + AAC_OPTION_IGNORE_RESET))) aac_reset_adapter(aac, 2); /* Bypass wait for command quiesce */ return SUCCESS; /* Cause an immediate retry of the command with a ten second delay after successful tur */ } diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c index 9b831519a6fa..a08bbf1fd76c 100644 --- a/drivers/scsi/aacraid/rx.c +++ b/drivers/scsi/aacraid/rx.c @@ -465,7 +465,7 @@ static int aac_rx_restart_adapter(struct aac_dev *dev, int bled) u32 var; if (!(dev->supplement_adapter_info.SupportedOptions2 & - cpu_to_le32(AAC_OPTION_MU_RESET)) || (bled >= 0) || (bled == -2)) { + AAC_OPTION_MU_RESET) || (bled >= 0) || (bled == -2)) { if (bled) printk(KERN_ERR "%s%d: adapter kernel panic'd %x.\n", dev->name, dev->id, bled); -- cgit v1.2.3-59-g8ed1b From 6dcd4a7fe5dfaace2763187d6941e700a8bc6f27 Mon Sep 17 00:00:00 2001 From: "Salyzyn, Mark" Date: Tue, 8 Jan 2008 13:08:04 -0800 Subject: [SCSI] aacraid: fix multiple definition of automatic variable warning. The 'entry' automatic variable was defined at the top and within a block that uses it, removed the definition from the block that uses it. Some cosmetic changes were made while in the same file. This patch should be inert. Signed-off-by: Mark Salyzyn Signed-off-by: James Bottomley --- drivers/scsi/aacraid/commctrl.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/aacraid/commctrl.c b/drivers/scsi/aacraid/commctrl.c index 1e6d7a9c75bf..a27207e27c30 100644 --- a/drivers/scsi/aacraid/commctrl.c +++ b/drivers/scsi/aacraid/commctrl.c @@ -275,7 +275,6 @@ static int next_getadapter_fib(struct aac_dev * dev, void __user *arg) */ return_fib: if (!list_empty(&fibctx->fib_list)) { - struct list_head * entry; /* * Pull the next fib from the fibs */ @@ -582,7 +581,7 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) void* p; /* Does this really need to be GFP_DMA? */ p = kmalloc(upsg->sg[i].count,GFP_KERNEL|__GFP_DMA); - if(p == 0) { + if(!p) { dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n", upsg->sg[i].count,i,upsg->count)); rcode = -ENOMEM; @@ -626,7 +625,7 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) void* p; /* Does this really need to be GFP_DMA? */ p = kmalloc(usg->sg[i].count,GFP_KERNEL|__GFP_DMA); - if(p == 0) { + if(!p) { kfree (usg); dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n", usg->sg[i].count,i,usg->count)); @@ -668,7 +667,7 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) void* p; /* Does this really need to be GFP_DMA? */ p = kmalloc(usg->sg[i].count,GFP_KERNEL|__GFP_DMA); - if(p == 0) { + if(!p) { dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n", usg->sg[i].count,i,usg->count)); rcode = -ENOMEM; @@ -698,7 +697,7 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) dma_addr_t addr; void* p; p = kmalloc(upsg->sg[i].count, GFP_KERNEL); - if(p == 0) { + if (!p) { dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n", upsg->sg[i].count, i, upsg->count)); rcode = -ENOMEM; -- cgit v1.2.3-59-g8ed1b From b6ef70f33ca2a3084b4fea12414550724a9114dc Mon Sep 17 00:00:00 2001 From: "Salyzyn, Mark" Date: Tue, 8 Jan 2008 13:26:43 -0800 Subject: [SCSI] aacraid: OS panic after Adapter panic (hardening). In experiments in the lab we managed to trigger an Adapter firmware panic (BlinkLED) coincidentally while several pass-through ioctl command from the management software were outstanding on a bug only present on a class of RAID Adapters that require a hardware reset rather than a commanded reset. The net result was an attempt to time out the management software command as if it came from the SCSI layer resulting in an OS panic. Adapters that use commanded reset, management commands are returned failed by the Adapter correctly. The adapter firmware panic that resulted in this condition was also resolved, and there were no adapters in the field with this specific firmware bug so we do not expect any field reports. This is a rare or unlikely corner condition, and no reports have ever been forwarded from the field. Signed-off-by: Mark Salyzyn Signed-off-by: James Bottomley --- drivers/scsi/aacraid/aacraid.h | 1 + drivers/scsi/aacraid/commsup.c | 4 +++- drivers/scsi/aacraid/dpcsup.c | 4 +++- drivers/scsi/aacraid/linit.c | 19 ++++++++++++++++++- 4 files changed, 25 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 07def7261004..85b85ae198f4 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -1073,6 +1073,7 @@ struct aac_dev (dev)->a_ops.adapter_comm(dev, comm) #define FIB_CONTEXT_FLAG_TIMED_OUT (0x00000001) +#define FIB_CONTEXT_FLAG (0x00000002) /* * Define the command values diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index e82d89ccaf15..3a3017d8dc65 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -171,6 +171,7 @@ struct fib *aac_fib_alloc(struct aac_dev *dev) * each I/O */ fibptr->hw_fib_va->header.XferState = 0; + fibptr->flags = 0; fibptr->callback = NULL; fibptr->callback_data = NULL; @@ -402,6 +403,7 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size, * will have a debug mode where the adapter can notify the host * it had a problem and the host can log that fact. */ + fibptr->flags = 0; if (wait && !reply) { return -EINVAL; } else if (!wait && reply) { @@ -450,10 +452,10 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size, if (!wait) { fibptr->callback = callback; fibptr->callback_data = callback_data; + fibptr->flags = FIB_CONTEXT_FLAG; } fibptr->done = 0; - fibptr->flags = 0; FIB_COUNTER_INCREMENT(aac_config.FibsSent); diff --git a/drivers/scsi/aacraid/dpcsup.c b/drivers/scsi/aacraid/dpcsup.c index 4726ab666c52..d1163ded132b 100644 --- a/drivers/scsi/aacraid/dpcsup.c +++ b/drivers/scsi/aacraid/dpcsup.c @@ -120,6 +120,7 @@ unsigned int aac_response_normal(struct aac_queue * q) * NOTE: we cannot touch the fib after this * call, because it may have been deallocated. */ + fib->flags = 0; fib->callback(fib->callback_data, fib); } else { unsigned long flagv; @@ -229,7 +230,7 @@ unsigned int aac_command_normal(struct aac_queue *q) * all QE there are and wake up all the waiters before exiting. */ -unsigned int aac_intr_normal(struct aac_dev *dev, u32 index) +unsigned int aac_intr_normal(struct aac_dev * dev, u32 index) { dprintk((KERN_INFO "aac_intr_normal(%p,%x)\n", dev, index)); if ((index & 0x00000002L)) { @@ -313,6 +314,7 @@ unsigned int aac_intr_normal(struct aac_dev *dev, u32 index) * NOTE: we cannot touch the fib after this * call, because it may have been deallocated. */ + fib->flags = 0; fib->callback(fib->callback_data, fib); } else { unsigned long flagv; diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 742e1a8edc60..6a553ea730db 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -536,17 +536,33 @@ static int aac_eh_abort(struct scsi_cmnd* cmd) break; case INQUIRY: case READ_CAPACITY: - case TEST_UNIT_READY: /* Mark associated FIB to not complete, eh handler does this */ for (count = 0; count < (host->can_queue + AAC_NUM_MGT_FIB); ++count) { struct fib * fib = &aac->fibs[count]; if (fib->hw_fib_va->header.XferState && + (fib->flags & FIB_CONTEXT_FLAG) && (fib->callback_data == cmd)) { fib->flags |= FIB_CONTEXT_FLAG_TIMED_OUT; cmd->SCp.phase = AAC_OWNER_ERROR_HANDLER; ret = SUCCESS; } } + break; + case TEST_UNIT_READY: + /* Mark associated FIB to not complete, eh handler does this */ + for (count = 0; count < (host->can_queue + AAC_NUM_MGT_FIB); ++count) { + struct scsi_cmnd * command; + struct fib * fib = &aac->fibs[count]; + if ((fib->hw_fib_va->header.XferState & cpu_to_le32(Async | NoResponseExpected)) && + (fib->flags & FIB_CONTEXT_FLAG) && + ((command = fib->callback_data)) && + (command->device == cmd->device)) { + fib->flags |= FIB_CONTEXT_FLAG_TIMED_OUT; + command->SCp.phase = AAC_OWNER_ERROR_HANDLER; + if (command == cmd) + ret = SUCCESS; + } + } } return ret; } @@ -569,6 +585,7 @@ static int aac_eh_reset(struct scsi_cmnd* cmd) for (count = 0; count < (host->can_queue + AAC_NUM_MGT_FIB); ++count) { struct fib * fib = &aac->fibs[count]; if (fib->hw_fib_va->header.XferState && + (fib->flags & FIB_CONTEXT_FLAG) && (fib->callback_data == cmd)) { fib->flags |= FIB_CONTEXT_FLAG_TIMED_OUT; cmd->SCp.phase = AAC_OWNER_ERROR_HANDLER; -- cgit v1.2.3-59-g8ed1b From b18268fc631034882f5f3dd93daa248a3bfdd085 Mon Sep 17 00:00:00 2001 From: "Salyzyn, Mark" Date: Tue, 8 Jan 2008 14:07:57 -0800 Subject: [SCSI] aacraid: improve queue balancing The adapter queue is divided up equally to all the arrays to prevent command starvation to any individual array. On the other hand, physical targets are only granted a queue depth of one each. The code prior to this patch used to deal with the incremental discovery of targets, but the driver knows how many arrays are present prior to the scan so this knowledge is used to generate a better estimate for the queue depth. Remove the capability of 'physical=0' from preventing access to the class of adapters that have the RAID/SCSI mode of operation since none of the physicals on the SCSI channel are candidates ever for an array. As always, the user can override this default queue depth policy by making the appropriate adjustments utilizing sysfs. Signed-off-by: Mark Salyzyn Signed-off-by: James Bottomley --- drivers/scsi/aacraid/linit.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 6a553ea730db..0523cc6d895c 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -401,16 +401,14 @@ static int aac_biosparm(struct scsi_device *sdev, struct block_device *bdev, static int aac_slave_configure(struct scsi_device *sdev) { + struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata; if ((sdev->type == TYPE_DISK) && - (sdev_channel(sdev) != CONTAINER_CHANNEL)) { + (sdev_channel(sdev) != CONTAINER_CHANNEL) && + (!aac->raid_scsi_mode || (sdev_channel(sdev) != 2))) { if (expose_physicals == 0) return -ENXIO; - if (expose_physicals < 0) { - struct aac_dev *aac = - (struct aac_dev *)sdev->host->hostdata; - if (!aac->raid_scsi_mode || (sdev_channel(sdev) != 2)) - sdev->no_uld_attach = 1; - } + if (expose_physicals < 0) + sdev->no_uld_attach = 1; } if (sdev->tagged_supported && (sdev->type == TYPE_DISK) && (sdev_channel(sdev) == CONTAINER_CHANNEL)) { @@ -419,6 +417,7 @@ static int aac_slave_configure(struct scsi_device *sdev) unsigned num_lsu = 0; unsigned num_one = 0; unsigned depth; + unsigned cid; /* * Firmware has an individual device recovery time typically @@ -426,11 +425,15 @@ static int aac_slave_configure(struct scsi_device *sdev) */ if (sdev->timeout < (45 * HZ)) sdev->timeout = 45 * HZ; + for (cid = 0; cid < aac->maximum_num_containers; ++cid) + if (aac->fsa_dev[cid].valid) + ++num_lsu; __shost_for_each_device(dev, host) { if (dev->tagged_supported && (dev->type == TYPE_DISK) && - (sdev_channel(dev) == CONTAINER_CHANNEL)) - ++num_lsu; - else + (sdev_channel(dev) == CONTAINER_CHANNEL)) { + if (!aac->fsa_dev[sdev_id(dev)].valid) + ++num_lsu; + } else ++num_one; } if (num_lsu == 0) -- cgit v1.2.3-59-g8ed1b From 0ff10d46cf0a373c9c855a23cc9383ba4030d8d2 Mon Sep 17 00:00:00 2001 From: James Smart Date: Fri, 11 Jan 2008 01:52:36 -0500 Subject: [SCSI] lpfc 8.2.4 : Miscellaneous Discovery/ELS Fixes Miscellaneous Discovery/ELS Fixes: - Delay free's of ELS requests if adapter reject conditions - Fix concurrent PLOGI vs ADISC state handling - Add retry mechanism for GFF_ID - Correct some illegal state transitions around RSCN timeouts - Fix missing return in FAN handling Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 5 +++ drivers/scsi/lpfc/lpfc_crtn.h | 1 + drivers/scsi/lpfc/lpfc_ct.c | 83 +++++++++++++++++++++++++++++++++----- drivers/scsi/lpfc/lpfc_els.c | 56 +++++++++++++++++++++++-- drivers/scsi/lpfc/lpfc_hbadisc.c | 1 + drivers/scsi/lpfc/lpfc_init.c | 23 +++++++++++ drivers/scsi/lpfc/lpfc_nportdisc.c | 43 ++++++++++++++++++-- drivers/scsi/lpfc/lpfc_sli.c | 26 ++++++++++++ drivers/scsi/lpfc/lpfc_sli.h | 1 + 9 files changed, 224 insertions(+), 15 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 1ddfd688fea3..b06635ac3356 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -583,6 +583,11 @@ struct lpfc_hba { atomic_t slow_ring_trc_cnt; #endif + /* Used for deferred freeing of ELS data buffers */ + struct list_head elsbuf; + int elsbuf_cnt; + int elsbuf_prev_cnt; + uint8_t temp_sensor_support; /* Fields used for heart beat. */ unsigned long last_completion_time; diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index d09eb533a27d..50fcb7c930bc 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -89,6 +89,7 @@ int lpfc_check_sparm(struct lpfc_vport *, struct lpfc_nodelist *, struct serv_parm *, uint32_t); int lpfc_els_abort(struct lpfc_hba *, struct lpfc_nodelist *); void lpfc_more_plogi(struct lpfc_vport *); +void lpfc_more_adisc(struct lpfc_vport *); void lpfc_end_rscn(struct lpfc_vport *); int lpfc_els_chk_latt(struct lpfc_vport *); int lpfc_els_abort_flogi(struct lpfc_hba *); diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c index e8bd7c122f1e..c735ed4ad070 100644 --- a/drivers/scsi/lpfc/lpfc_ct.c +++ b/drivers/scsi/lpfc/lpfc_ct.c @@ -426,6 +426,7 @@ lpfc_ns_rsp(struct lpfc_vport *vport, struct lpfc_dmabuf *mp, uint32_t Size) lpfc_set_disctmo(vport); vport->num_disc_nodes = 0; + vport->fc_ns_retry = 0; list_add_tail(&head, &mp->list); @@ -506,7 +507,17 @@ lpfc_ns_rsp(struct lpfc_vport *vport, struct lpfc_dmabuf *mp, uint32_t Size) Did, vport->fc_flag, vport->fc_rscn_id_cnt); - if (lpfc_ns_cmd(vport, + /* This NPortID was previously + * a FCP target, * Don't even + * bother to send GFF_ID. + */ + ndlp = lpfc_findnode_did(vport, + Did); + if (ndlp && (ndlp->nlp_type & + NLP_FCP_TARGET)) + lpfc_setup_disc_node + (vport, Did); + else if (lpfc_ns_cmd(vport, SLI_CTNS_GFF_ID, 0, Did) == 0) vport->num_disc_nodes++; @@ -554,7 +565,7 @@ lpfc_cmpl_ct_cmd_gid_ft(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_dmabuf *outp; struct lpfc_sli_ct_request *CTrsp; struct lpfc_nodelist *ndlp; - int rc; + int rc, retry; /* First save ndlp, before we overwrite it */ ndlp = cmdiocb->context_un.ndlp; @@ -585,14 +596,35 @@ lpfc_cmpl_ct_cmd_gid_ft(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, if (irsp->ulpStatus) { /* Check for retry */ if (vport->fc_ns_retry < LPFC_MAX_NS_RETRY) { - if ((irsp->ulpStatus != IOSTAT_LOCAL_REJECT) || - (irsp->un.ulpWord[4] != IOERR_NO_RESOURCES)) + retry = 1; + if (irsp->ulpStatus == IOSTAT_LOCAL_REJECT) { + switch (irsp->un.ulpWord[4]) { + case IOERR_NO_RESOURCES: + /* We don't increment the retry + * count for this case. + */ + break; + case IOERR_LINK_DOWN: + case IOERR_SLI_ABORTED: + case IOERR_SLI_DOWN: + retry = 0; + break; + default: + vport->fc_ns_retry++; + } + } + else vport->fc_ns_retry++; - /* CT command is being retried */ - rc = lpfc_ns_cmd(vport, SLI_CTNS_GID_FT, + + if (retry) { + /* CT command is being retried */ + rc = lpfc_ns_cmd(vport, SLI_CTNS_GID_FT, vport->fc_ns_retry, 0); - if (rc == 0) - goto out; + if (rc == 0) { + /* success */ + goto out; + } + } } lpfc_vport_set_state(vport, FC_VPORT_FAILED); lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, @@ -698,7 +730,7 @@ lpfc_cmpl_ct_cmd_gff_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, struct lpfc_dmabuf *inp = (struct lpfc_dmabuf *) cmdiocb->context1; struct lpfc_dmabuf *outp = (struct lpfc_dmabuf *) cmdiocb->context2; struct lpfc_sli_ct_request *CTrsp; - int did; + int did, rc, retry; uint8_t fbits; struct lpfc_nodelist *ndlp; @@ -729,6 +761,39 @@ lpfc_cmpl_ct_cmd_gff_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, } } else { + /* Check for retry */ + if (cmdiocb->retry < LPFC_MAX_NS_RETRY) { + retry = 1; + if (irsp->ulpStatus == IOSTAT_LOCAL_REJECT) { + switch (irsp->un.ulpWord[4]) { + case IOERR_NO_RESOURCES: + /* We don't increment the retry + * count for this case. + */ + break; + case IOERR_LINK_DOWN: + case IOERR_SLI_ABORTED: + case IOERR_SLI_DOWN: + retry = 0; + break; + default: + cmdiocb->retry++; + } + } + else + cmdiocb->retry++; + + if (retry) { + /* CT command is being retried */ + rc = lpfc_ns_cmd(vport, SLI_CTNS_GFF_ID, + cmdiocb->retry, did); + if (rc == 0) { + /* success */ + lpfc_ct_free_iocb(phba, cmdiocb); + return; + } + } + } lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, "0267 NameServer GFF Rsp " "x%x Error (%d %d) Data: x%x x%x\n", diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index bf332cba2fc0..f5e002435972 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -783,6 +783,8 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp, { struct lpfc_vport *vport = ndlp->vport; struct lpfc_nodelist *new_ndlp; + struct lpfc_rport_data *rdata; + struct fc_rport *rport; struct serv_parm *sp; uint8_t name[sizeof(struct lpfc_name)]; uint32_t rc; @@ -819,6 +821,11 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp, lpfc_unreg_rpi(vport, new_ndlp); new_ndlp->nlp_DID = ndlp->nlp_DID; new_ndlp->nlp_prev_state = ndlp->nlp_prev_state; + + if (ndlp->nlp_flag & NLP_NPR_2B_DISC) + new_ndlp->nlp_flag |= NLP_NPR_2B_DISC; + ndlp->nlp_flag &= ~NLP_NPR_2B_DISC; + lpfc_nlp_set_state(vport, new_ndlp, ndlp->nlp_state); /* Move this back to NPR state */ @@ -826,6 +833,20 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp, /* The new_ndlp is replacing ndlp totally, so we need * to put ndlp on UNUSED list and try to free it. */ + + /* Fix up the rport accordingly */ + rport = ndlp->rport; + if (rport) { + rdata = rport->dd_data; + if (rdata->pnode == ndlp) { + lpfc_nlp_put(ndlp); + ndlp->rport = NULL; + rdata->pnode = lpfc_nlp_get(new_ndlp); + new_ndlp->rport = rport; + } + new_ndlp->nlp_type = ndlp->nlp_type; + } + lpfc_drop_node(vport, ndlp); } else { @@ -1149,7 +1170,7 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, return 0; } -static void +void lpfc_more_adisc(struct lpfc_vport *vport) { int sentadisc; @@ -2100,8 +2121,35 @@ lpfc_els_free_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *elsiocb) } /* context2 = cmd, context2->next = rsp, context3 = bpl */ if (elsiocb->context2) { - buf_ptr1 = (struct lpfc_dmabuf *) elsiocb->context2; - lpfc_els_free_data(phba, buf_ptr1); + if (elsiocb->iocb_flag & LPFC_DELAY_MEM_FREE) { + /* Firmware could still be in progress of DMAing + * payload, so don't free data buffer till after + * a hbeat. + */ + elsiocb->iocb_flag &= ~LPFC_DELAY_MEM_FREE; + buf_ptr = elsiocb->context2; + elsiocb->context2 = NULL; + if (buf_ptr) { + buf_ptr1 = NULL; + spin_lock_irq(&phba->hbalock); + if (!list_empty(&buf_ptr->list)) { + list_remove_head(&buf_ptr->list, + buf_ptr1, struct lpfc_dmabuf, + list); + INIT_LIST_HEAD(&buf_ptr1->list); + list_add_tail(&buf_ptr1->list, + &phba->elsbuf); + phba->elsbuf_cnt++; + } + INIT_LIST_HEAD(&buf_ptr->list); + list_add_tail(&buf_ptr->list, &phba->elsbuf); + phba->elsbuf_cnt++; + spin_unlock_irq(&phba->hbalock); + } + } else { + buf_ptr1 = (struct lpfc_dmabuf *) elsiocb->context2; + lpfc_els_free_data(phba, buf_ptr1); + } } if (elsiocb->context3) { @@ -3027,6 +3075,8 @@ lpfc_els_handle_rscn(struct lpfc_vport *vport) /* To process RSCN, first compare RSCN data with NameServer */ vport->fc_ns_retry = 0; + vport->num_disc_nodes = 0; + ndlp = lpfc_findnode_did(vport, NameServer_DID); if (ndlp && ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) { /* Good ndlp, issue CT Request to NameServer */ diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 74c3b7039c9e..f2b8bc49fe52 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -2564,6 +2564,7 @@ lpfc_disc_timeout_handler(struct lpfc_vport *vport) } if (vport->port_state != LPFC_FLOGI) { lpfc_initial_flogi(vport); + return; } break; diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 0143baf4ba3b..f32cd9acd3f6 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -547,8 +547,10 @@ void lpfc_hb_timeout_handler(struct lpfc_hba *phba) { LPFC_MBOXQ_t *pmboxq; + struct lpfc_dmabuf *buf_ptr; int retval; struct lpfc_sli *psli = &phba->sli; + LIST_HEAD(completions); if ((phba->link_state == LPFC_HBA_ERROR) || (phba->pport->load_flag & FC_UNLOADING) || @@ -575,6 +577,24 @@ lpfc_hb_timeout_handler(struct lpfc_hba *phba) } spin_unlock_irq(&phba->pport->work_port_lock); + if (phba->elsbuf_cnt && + (phba->elsbuf_cnt == phba->elsbuf_prev_cnt)) { + spin_lock_irq(&phba->hbalock); + list_splice_init(&phba->elsbuf, &completions); + phba->elsbuf_cnt = 0; + phba->elsbuf_prev_cnt = 0; + spin_unlock_irq(&phba->hbalock); + + while (!list_empty(&completions)) { + list_remove_head(&completions, buf_ptr, + struct lpfc_dmabuf, list); + lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys); + kfree(buf_ptr); + } + } + phba->elsbuf_prev_cnt = phba->elsbuf_cnt; + + /* If there is no heart beat outstanding, issue a heartbeat command */ if (!phba->hb_outstanding) { pmboxq = mempool_alloc(phba->mbox_mem_pool,GFP_KERNEL); @@ -1999,6 +2019,9 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) /* Initialize list of fabric iocbs */ INIT_LIST_HEAD(&phba->fabric_iocb_list); + /* Initialize list to save ELS buffers */ + INIT_LIST_HEAD(&phba->elsbuf); + vport = lpfc_create_port(phba, phba->brd_no, &phba->pcidev->dev); if (!vport) goto out_kthread_stop; diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index c654c787c3e6..783659aa2102 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -442,7 +442,27 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, spin_lock_irq(shost->host_lock); ndlp->nlp_flag &= ~NLP_NPR_2B_DISC; spin_unlock_irq(shost->host_lock); - if (vport->num_disc_nodes) { + + if ((ndlp->nlp_flag & NLP_ADISC_SND) && + (vport->num_disc_nodes)) { + /* Check to see if there are more + * ADISCs to be sent + */ + lpfc_more_adisc(vport); + + if ((vport->num_disc_nodes == 0) && + (vport->fc_npr_cnt)) + lpfc_els_disc_plogi(vport); + + if (vport->num_disc_nodes == 0) { + spin_lock_irq(shost->host_lock); + vport->fc_flag &= ~FC_NDISC_ACTIVE; + spin_unlock_irq(shost->host_lock); + lpfc_can_disctmo(vport); + lpfc_end_rscn(vport); + } + } + else if (vport->num_disc_nodes) { /* Check to see if there are more * PLOGIs to be sent */ @@ -813,6 +833,7 @@ lpfc_cmpl_plogi_plogi_issue(struct lpfc_vport *vport, uint32_t evt) { struct lpfc_hba *phba = vport->phba; + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); struct lpfc_iocbq *cmdiocb, *rspiocb; struct lpfc_dmabuf *pcmd, *prsp, *mp; uint32_t *lp; @@ -930,10 +951,26 @@ out: "0261 Cannot Register NameServer login\n"); } + spin_lock_irq(shost->host_lock); ndlp->nlp_flag |= NLP_DEFER_RM; + spin_unlock_irq(shost->host_lock); return NLP_STE_FREED_NODE; } +static uint32_t +lpfc_cmpl_logo_plogi_issue(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, + void *arg, uint32_t evt) +{ + return ndlp->nlp_state; +} + +static uint32_t +lpfc_cmpl_reglogin_plogi_issue(struct lpfc_vport *vport, + struct lpfc_nodelist *ndlp, void *arg, uint32_t evt) +{ + return ndlp->nlp_state; +} + static uint32_t lpfc_device_rm_plogi_issue(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, void *arg, uint32_t evt) @@ -2006,9 +2043,9 @@ static uint32_t (*lpfc_disc_action[NLP_STE_MAX_STATE * NLP_EVT_MAX_EVENT]) lpfc_rcv_els_plogi_issue, /* RCV_PRLO */ lpfc_cmpl_plogi_plogi_issue, /* CMPL_PLOGI */ lpfc_disc_illegal, /* CMPL_PRLI */ - lpfc_disc_illegal, /* CMPL_LOGO */ + lpfc_cmpl_logo_plogi_issue, /* CMPL_LOGO */ lpfc_disc_illegal, /* CMPL_ADISC */ - lpfc_disc_illegal, /* CMPL_REG_LOGIN */ + lpfc_cmpl_reglogin_plogi_issue,/* CMPL_REG_LOGIN */ lpfc_device_rm_plogi_issue, /* DEVICE_RM */ lpfc_device_recov_plogi_issue, /* DEVICE_RECOVERY */ diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index dcc48988040c..be6519793f8a 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -1147,6 +1147,12 @@ lpfc_sli_process_sol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, IOSTAT_LOCAL_REJECT; saveq->iocb.un.ulpWord[4] = IOERR_SLI_ABORTED; + + /* Firmware could still be in progress + * of DMAing payload, so don't free data + * buffer till after a hbeat. + */ + saveq->iocb_flag |= LPFC_DELAY_MEM_FREE; } } (cmdiocbp->iocb_cmpl) (phba, cmdiocbp, saveq); @@ -3281,6 +3287,7 @@ lpfc_sli_hba_down(struct lpfc_hba *phba) LIST_HEAD(completions); struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; + struct lpfc_dmabuf *buf_ptr; LPFC_MBOXQ_t *pmb; struct lpfc_iocbq *iocb; IOCB_t *cmd = NULL; @@ -3320,6 +3327,19 @@ lpfc_sli_hba_down(struct lpfc_hba *phba) } } + spin_lock_irqsave(&phba->hbalock, flags); + list_splice_init(&phba->elsbuf, &completions); + phba->elsbuf_cnt = 0; + phba->elsbuf_prev_cnt = 0; + spin_unlock_irqrestore(&phba->hbalock, flags); + + while (!list_empty(&completions)) { + list_remove_head(&completions, buf_ptr, + struct lpfc_dmabuf, list); + lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys); + kfree(buf_ptr); + } + /* Return any active mbox cmds */ del_timer_sync(&psli->mbox_tmo); spin_lock_irqsave(&phba->hbalock, flags); @@ -3490,6 +3510,12 @@ lpfc_sli_abort_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, pring->txcmplq_cnt--; spin_unlock_irq(&phba->hbalock); + /* Firmware could still be in progress of DMAing + * payload, so don't free data buffer till after + * a hbeat. + */ + abort_iocb->iocb_flag |= LPFC_DELAY_MEM_FREE; + abort_iocb->iocb_flag &= ~LPFC_DRIVER_ABORTED; abort_iocb->iocb.ulpStatus = IOSTAT_LOCAL_REJECT; abort_iocb->iocb.un.ulpWord[4] = IOERR_SLI_ABORTED; diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h index 5fcfe88e2a3f..1796473ad65e 100644 --- a/drivers/scsi/lpfc/lpfc_sli.h +++ b/drivers/scsi/lpfc/lpfc_sli.h @@ -44,6 +44,7 @@ struct lpfc_iocbq { #define LPFC_IO_FCP 4 /* FCP command -- iocbq in scsi_buf */ #define LPFC_DRIVER_ABORTED 8 /* driver aborted this request */ #define LPFC_IO_FABRIC 0x10 /* Iocb send using fabric scheduler */ +#define LPFC_DELAY_MEM_FREE 0x20 /* Defer free'ing of FC data */ uint8_t abort_count; uint8_t rsvd2; -- cgit v1.2.3-59-g8ed1b From fa61a54e48efc8e5c7a6d4680ad8ceb74a5fca84 Mon Sep 17 00:00:00 2001 From: James Smart Date: Fri, 11 Jan 2008 01:52:42 -0500 Subject: [SCSI] lpfc 8.2.4 : Correct abort handler logic Correct Abort handler logic. It was unconditionally waiting a minimum of 2 seconds rather than looking for abort completion. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_scsi.c | 38 ++++++++++++++++++++++++++++---------- drivers/scsi/lpfc/lpfc_scsi.h | 1 + 2 files changed, 29 insertions(+), 10 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 4e46045dea6d..c987c4fcdadc 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -542,6 +542,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, int result; struct scsi_device *sdev, *tmp_sdev; int depth = 0; + unsigned long flags; lpfc_cmd->result = pIocbOut->iocb.un.ulpWord[4]; lpfc_cmd->status = pIocbOut->iocb.ulpStatus; @@ -608,6 +609,15 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, cmd->scsi_done(cmd); if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) { + /* + * If there is a thread waiting for command completion + * wake up the thread. + */ + spin_lock_irqsave(sdev->host->host_lock, flags); + lpfc_cmd->pCmd = NULL; + if (lpfc_cmd->waitq) + wake_up(lpfc_cmd->waitq); + spin_unlock_irqrestore(sdev->host->host_lock, flags); lpfc_release_scsi_buf(phba, lpfc_cmd); return; } @@ -669,6 +679,16 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, } } + /* + * If there is a thread waiting for command completion + * wake up the thread. + */ + spin_lock_irqsave(sdev->host->host_lock, flags); + lpfc_cmd->pCmd = NULL; + if (lpfc_cmd->waitq) + wake_up(lpfc_cmd->waitq); + spin_unlock_irqrestore(sdev->host->host_lock, flags); + lpfc_release_scsi_buf(phba, lpfc_cmd); } @@ -1018,8 +1038,8 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) struct lpfc_iocbq *abtsiocb; struct lpfc_scsi_buf *lpfc_cmd; IOCB_t *cmd, *icmd; - unsigned int loop_count = 0; int ret = SUCCESS; + DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waitq); lpfc_block_error_handler(cmnd); lpfc_cmd = (struct lpfc_scsi_buf *)cmnd->host_scribble; @@ -1074,17 +1094,15 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd) if (phba->cfg_poll & DISABLE_FCP_RING_INT) lpfc_sli_poll_fcp_ring (phba); + lpfc_cmd->waitq = &waitq; /* Wait for abort to complete */ - while (lpfc_cmd->pCmd == cmnd) - { - if (phba->cfg_poll & DISABLE_FCP_RING_INT) - lpfc_sli_poll_fcp_ring (phba); + wait_event_timeout(waitq, + (lpfc_cmd->pCmd != cmnd), + (2*vport->cfg_devloss_tmo*HZ)); - schedule_timeout_uninterruptible(LPFC_ABORT_WAIT * HZ); - if (++loop_count - > (2 * vport->cfg_devloss_tmo)/LPFC_ABORT_WAIT) - break; - } + spin_lock_irq(shost->host_lock); + lpfc_cmd->waitq = NULL; + spin_unlock_irq(shost->host_lock); if (lpfc_cmd->pCmd == cmnd) { ret = FAILED; diff --git a/drivers/scsi/lpfc/lpfc_scsi.h b/drivers/scsi/lpfc/lpfc_scsi.h index 31787bb6d53e..daba92374985 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.h +++ b/drivers/scsi/lpfc/lpfc_scsi.h @@ -138,6 +138,7 @@ struct lpfc_scsi_buf { * Iotag is in here */ struct lpfc_iocbq cur_iocbq; + wait_queue_head_t *waitq; }; #define LPFC_SCSI_DMA_EXT_SIZE 264 -- cgit v1.2.3-59-g8ed1b From 13815c8344a238c204e4f4339b22dc4833c6df0f Mon Sep 17 00:00:00 2001 From: James Smart Date: Fri, 11 Jan 2008 01:52:48 -0500 Subject: [SCSI] lpfc 8.2.4 : Add parameters to enable and disable heartbeat and hba resets Add parameters to enable and disable heartbeat and hba resets Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 3 +- drivers/scsi/lpfc/lpfc_attr.c | 25 ++++++++++++++ drivers/scsi/lpfc/lpfc_init.c | 78 +++++++++++++++++++++++-------------------- drivers/scsi/lpfc/lpfc_sli.c | 5 +++ 4 files changed, 73 insertions(+), 38 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index b06635ac3356..5bf402a20682 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -471,7 +471,8 @@ struct lpfc_hba { uint64_t cfg_soft_wwnn; uint64_t cfg_soft_wwpn; uint32_t cfg_hba_queue_depth; - + uint32_t cfg_enable_hba_reset; + uint32_t cfg_enable_hba_heartbeat; lpfc_vpd_t vpd; /* vital product data */ diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index e1b041d8f6d5..68e92be1ef5b 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -342,6 +342,9 @@ lpfc_selective_reset(struct lpfc_hba *phba) struct completion online_compl; int status = 0; + if (!phba->cfg_enable_hba_reset) + return -EIO; + status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE); if (status != 0) @@ -415,6 +418,8 @@ lpfc_board_mode_store(struct class_device *cdev, const char *buf, size_t count) struct completion online_compl; int status=0; + if (!phba->cfg_enable_hba_reset) + return -EACCES; init_completion(&online_compl); if(strncmp(buf, "online", sizeof("online") - 1) == 0) { @@ -979,6 +984,8 @@ lpfc_soft_wwpn_store(struct class_device *cdev, const char *buf, size_t count) unsigned int i, j, cnt=count; u8 wwpn[8]; + if (!phba->cfg_enable_hba_reset) + return -EACCES; spin_lock_irq(&phba->hbalock); if (phba->over_temp_state == HBA_OVER_TEMP) { spin_unlock_irq(&phba->hbalock); @@ -1506,7 +1513,21 @@ LPFC_ATTR_RW(poll_tmo, 10, 1, 255, */ LPFC_ATTR_R(use_msi, 0, 0, 1, "Use Message Signaled Interrupts, if possible"); +/* +# lpfc_enable_hba_reset: Allow or prevent HBA resets to the hardware. +# 0 = HBA resets disabled +# 1 = HBA resets enabled (default) +# Value range is [0,1]. Default value is 1. +*/ +LPFC_ATTR_R(enable_hba_reset, 1, 0, 1, "Enable HBA resets from the driver."); +/* +# lpfc_enable_hba_heartbeat: Enable HBA heartbeat timer.. +# 0 = HBA Heartbeat disabled +# 1 = HBA Heartbeat enabled (default) +# Value range is [0,1]. Default value is 1. +*/ +LPFC_ATTR_R(enable_hba_heartbeat, 1, 0, 1, "Enable HBA Heartbeat."); struct class_device_attribute *lpfc_hba_attrs[] = { &class_device_attr_info, @@ -1558,6 +1579,8 @@ struct class_device_attribute *lpfc_hba_attrs[] = { &class_device_attr_lpfc_soft_wwnn, &class_device_attr_lpfc_soft_wwpn, &class_device_attr_lpfc_soft_wwn_enable, + &class_device_attr_lpfc_enable_hba_reset, + &class_device_attr_lpfc_enable_hba_heartbeat, NULL, }; @@ -2448,6 +2471,8 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) lpfc_poll_tmo_init(phba, lpfc_poll_tmo); lpfc_enable_npiv_init(phba, lpfc_enable_npiv); lpfc_use_msi_init(phba, lpfc_use_msi); + lpfc_enable_hba_reset_init(phba, lpfc_enable_hba_reset); + lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat); phba->cfg_poll = lpfc_poll; phba->cfg_soft_wwnn = 0L; phba->cfg_soft_wwpn = 0L; diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index f32cd9acd3f6..c6b30a8617bc 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -594,49 +594,50 @@ lpfc_hb_timeout_handler(struct lpfc_hba *phba) } phba->elsbuf_prev_cnt = phba->elsbuf_cnt; - /* If there is no heart beat outstanding, issue a heartbeat command */ - if (!phba->hb_outstanding) { - pmboxq = mempool_alloc(phba->mbox_mem_pool,GFP_KERNEL); - if (!pmboxq) { - mod_timer(&phba->hb_tmofunc, - jiffies + HZ * LPFC_HB_MBOX_INTERVAL); - return; - } + if (phba->cfg_enable_hba_heartbeat) { + if (!phba->hb_outstanding) { + pmboxq = mempool_alloc(phba->mbox_mem_pool,GFP_KERNEL); + if (!pmboxq) { + mod_timer(&phba->hb_tmofunc, + jiffies + HZ * LPFC_HB_MBOX_INTERVAL); + return; + } - lpfc_heart_beat(phba, pmboxq); - pmboxq->mbox_cmpl = lpfc_hb_mbox_cmpl; - pmboxq->vport = phba->pport; - retval = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT); + lpfc_heart_beat(phba, pmboxq); + pmboxq->mbox_cmpl = lpfc_hb_mbox_cmpl; + pmboxq->vport = phba->pport; + retval = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT); - if (retval != MBX_BUSY && retval != MBX_SUCCESS) { - mempool_free(pmboxq, phba->mbox_mem_pool); + if (retval != MBX_BUSY && retval != MBX_SUCCESS) { + mempool_free(pmboxq, phba->mbox_mem_pool); + mod_timer(&phba->hb_tmofunc, + jiffies + HZ * LPFC_HB_MBOX_INTERVAL); + return; + } mod_timer(&phba->hb_tmofunc, - jiffies + HZ * LPFC_HB_MBOX_INTERVAL); + jiffies + HZ * LPFC_HB_MBOX_TIMEOUT); + phba->hb_outstanding = 1; return; + } else { + /* + * If heart beat timeout called with hb_outstanding set + * we need to take the HBA offline. + */ + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0459 Adapter heartbeat failure, " + "taking this port offline.\n"); + + spin_lock_irq(&phba->hbalock); + psli->sli_flag &= ~LPFC_SLI2_ACTIVE; + spin_unlock_irq(&phba->hbalock); + + lpfc_offline_prep(phba); + lpfc_offline(phba); + lpfc_unblock_mgmt_io(phba); + phba->link_state = LPFC_HBA_ERROR; + lpfc_hba_down_post(phba); } - mod_timer(&phba->hb_tmofunc, - jiffies + HZ * LPFC_HB_MBOX_TIMEOUT); - phba->hb_outstanding = 1; - return; - } else { - /* - * If heart beat timeout called with hb_outstanding set we - * need to take the HBA offline. - */ - lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "0459 Adapter heartbeat failure, taking " - "this port offline.\n"); - - spin_lock_irq(&phba->hbalock); - psli->sli_flag &= ~LPFC_SLI2_ACTIVE; - spin_unlock_irq(&phba->hbalock); - - lpfc_offline_prep(phba); - lpfc_offline(phba); - lpfc_unblock_mgmt_io(phba); - phba->link_state = LPFC_HBA_ERROR; - lpfc_hba_down_post(phba); } } @@ -665,6 +666,9 @@ lpfc_handle_eratt(struct lpfc_hba *phba) * since we cannot communicate with the pci card anyway. */ if (pci_channel_offline(phba->pcidev)) return; + /* If resets are disabled then leave the HBA alone and return */ + if (!phba->cfg_enable_hba_reset) + return; if (phba->work_hs & HS_FFER6 || phba->work_hs & HS_FFER5) { diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index be6519793f8a..46d529d6ac6b 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -2559,6 +2559,11 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba) * lpfc_offline calls lpfc_sli_hba_down which will clean up * on oustanding mailbox commands. */ + /* If resets are disabled then set error state and return. */ + if (!phba->cfg_enable_hba_reset) { + phba->link_state = LPFC_HBA_ERROR; + return; + } lpfc_offline_prep(phba); lpfc_offline(phba); lpfc_sli_brdrestart(phba); -- cgit v1.2.3-59-g8ed1b From 0937282036d9ae798e02c9c69a8b2ef044048855 Mon Sep 17 00:00:00 2001 From: James Smart Date: Fri, 11 Jan 2008 01:52:54 -0500 Subject: [SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 3 +- drivers/scsi/lpfc/lpfc_attr.c | 32 +++++--- drivers/scsi/lpfc/lpfc_ct.c | 16 ++-- drivers/scsi/lpfc/lpfc_els.c | 42 +++++++---- drivers/scsi/lpfc/lpfc_hbadisc.c | 46 +++++++----- drivers/scsi/lpfc/lpfc_hw.h | 6 +- drivers/scsi/lpfc/lpfc_init.c | 119 +++++++++++++++++++---------- drivers/scsi/lpfc/lpfc_mbox.c | 2 +- drivers/scsi/lpfc/lpfc_mem.c | 1 + drivers/scsi/lpfc/lpfc_scsi.c | 12 +-- drivers/scsi/lpfc/lpfc_sli.c | 156 ++++++++++++++++++++++----------------- drivers/scsi/lpfc/lpfc_vport.c | 6 +- drivers/scsi/lpfc/lpfc_vport.h | 2 +- 13 files changed, 274 insertions(+), 169 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 5bf402a20682..2c3e171da8cb 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -559,8 +559,7 @@ struct lpfc_hba { struct list_head port_list; struct lpfc_vport *pport; /* physical lpfc_vport pointer */ uint16_t max_vpi; /* Maximum virtual nports */ -#define LPFC_MAX_VPI 100 /* Max number of VPI supported */ -#define LPFC_MAX_VPORTS (LPFC_MAX_VPI+1)/* Max number of VPorts supported */ +#define LPFC_MAX_VPI 0xFFFF /* Max number of VPI supported */ unsigned long *vpi_bmask; /* vpi allocation table */ /* Data structure used by fabric iocb scheduler */ diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 68e92be1ef5b..eb5a5ad4ffbf 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2007 Emulex. All rights reserved. * + * Copyright (C) 2004-2008 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -311,12 +311,14 @@ lpfc_do_offline(struct lpfc_hba *phba, uint32_t type) psli = &phba->sli; + /* Wait a little for things to settle down, but not + * long enough for dev loss timeout to expire. + */ for (i = 0; i < psli->num_rings; i++) { pring = &psli->ring[i]; - /* The linkdown event takes 30 seconds to timeout. */ while (pring->txcmplq_cnt) { msleep(10); - if (cnt++ > 3000) { + if (cnt++ > 500) { /* 5 secs */ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, "0466 Outstanding IO when " @@ -989,7 +991,7 @@ lpfc_soft_wwpn_store(struct class_device *cdev, const char *buf, size_t count) spin_lock_irq(&phba->hbalock); if (phba->over_temp_state == HBA_OVER_TEMP) { spin_unlock_irq(&phba->hbalock); - return -EPERM; + return -EACCES; } spin_unlock_irq(&phba->hbalock); /* count may include a LF at end of string */ @@ -1782,7 +1784,7 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr, if (phba->over_temp_state == HBA_OVER_TEMP) { sysfs_mbox_idle(phba); spin_unlock_irq(&phba->hbalock); - return -EPERM; + return -EACCES; } if (off == 0 && @@ -1801,9 +1803,7 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr, case MBX_DUMP_CONTEXT: case MBX_RUN_DIAGS: case MBX_RESTART: - case MBX_FLASH_WR_ULA: case MBX_SET_MASK: - case MBX_SET_SLIM: case MBX_SET_DEBUG: if (!(vport->fc_flag & FC_OFFLINE_MODE)) { printk(KERN_WARNING "mbox_read:Command 0x%x " @@ -1831,6 +1831,8 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr, case MBX_LOAD_EXP_ROM: case MBX_BEACON: case MBX_DEL_LD_ENTRY: + case MBX_SET_VARIABLE: + case MBX_WRITE_WWN: break; case MBX_READ_SPARM64: case MBX_READ_LA: @@ -1852,6 +1854,17 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr, return -EPERM; } + /* If HBA encountered an error attention, allow only DUMP + * mailbox command until the HBA is restarted. + */ + if ((phba->pport->stopped) && + (phba->sysfs_mbox.mbox->mb.mbxCommand + != MBX_DUMP_MEMORY)) { + sysfs_mbox_idle(phba); + spin_unlock_irq(&phba->hbalock); + return -EPERM; + } + phba->sysfs_mbox.mbox->vport = vport; if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) { @@ -2052,7 +2065,8 @@ lpfc_get_host_speed(struct Scsi_Host *shost) fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN; break; } - } + } else + fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN; spin_unlock_irq(shost->host_lock); } @@ -2072,7 +2086,7 @@ lpfc_get_host_fabric_name (struct Scsi_Host *shost) node_name = wwn_to_u64(phba->fc_fabparam.nodeName.u.wwn); else /* fabric is local port if there is no F/FL_Port */ - node_name = wwn_to_u64(vport->fc_nodename.u.wwn); + node_name = 0; spin_unlock_irq(shost->host_lock); diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c index c735ed4ad070..7a8b3b90af71 100644 --- a/drivers/scsi/lpfc/lpfc_ct.c +++ b/drivers/scsi/lpfc/lpfc_ct.c @@ -19,7 +19,7 @@ *******************************************************************/ /* - * Fibre Channel SCSI LAN Device Driver CT support + * Fibre Channel SCSI LAN Device Driver CT support: FC Generic Services FC-GS */ #include @@ -203,7 +203,7 @@ lpfc_alloc_ct_rsp(struct lpfc_hba *phba, int cmdcode, struct ulp_bde64 *bpl, struct lpfc_dmabuf *mp; int cnt, i = 0; - /* We get chucks of FCELSSIZE */ + /* We get chunks of FCELSSIZE */ cnt = size > FCELSSIZE ? FCELSSIZE: size; while (size) { @@ -1175,7 +1175,7 @@ lpfc_ns_cmd(struct lpfc_vport *vport, int cmdcode, case SLI_CTNS_GFF_ID: CtReq->CommandResponse.bits.CmdRsp = be16_to_cpu(SLI_CTNS_GFF_ID); - CtReq->un.gff.PortId = be32_to_cpu(context); + CtReq->un.gff.PortId = cpu_to_be32(context); cmpl = lpfc_cmpl_ct_cmd_gff_id; break; @@ -1183,7 +1183,7 @@ lpfc_ns_cmd(struct lpfc_vport *vport, int cmdcode, vport->ct_flags &= ~FC_CT_RFT_ID; CtReq->CommandResponse.bits.CmdRsp = be16_to_cpu(SLI_CTNS_RFT_ID); - CtReq->un.rft.PortId = be32_to_cpu(vport->fc_myDID); + CtReq->un.rft.PortId = cpu_to_be32(vport->fc_myDID); CtReq->un.rft.fcpReg = 1; cmpl = lpfc_cmpl_ct_cmd_rft_id; break; @@ -1192,7 +1192,7 @@ lpfc_ns_cmd(struct lpfc_vport *vport, int cmdcode, vport->ct_flags &= ~FC_CT_RNN_ID; CtReq->CommandResponse.bits.CmdRsp = be16_to_cpu(SLI_CTNS_RNN_ID); - CtReq->un.rnn.PortId = be32_to_cpu(vport->fc_myDID); + CtReq->un.rnn.PortId = cpu_to_be32(vport->fc_myDID); memcpy(CtReq->un.rnn.wwnn, &vport->fc_nodename, sizeof (struct lpfc_name)); cmpl = lpfc_cmpl_ct_cmd_rnn_id; @@ -1202,7 +1202,7 @@ lpfc_ns_cmd(struct lpfc_vport *vport, int cmdcode, vport->ct_flags &= ~FC_CT_RSPN_ID; CtReq->CommandResponse.bits.CmdRsp = be16_to_cpu(SLI_CTNS_RSPN_ID); - CtReq->un.rspn.PortId = be32_to_cpu(vport->fc_myDID); + CtReq->un.rspn.PortId = cpu_to_be32(vport->fc_myDID); size = sizeof(CtReq->un.rspn.symbname); CtReq->un.rspn.len = lpfc_vport_symbolic_port_name(vport, @@ -1225,14 +1225,14 @@ lpfc_ns_cmd(struct lpfc_vport *vport, int cmdcode, /* Implement DA_ID Nameserver request */ CtReq->CommandResponse.bits.CmdRsp = be16_to_cpu(SLI_CTNS_DA_ID); - CtReq->un.da_id.port_id = be32_to_cpu(vport->fc_myDID); + CtReq->un.da_id.port_id = cpu_to_be32(vport->fc_myDID); cmpl = lpfc_cmpl_ct_cmd_da_id; break; case SLI_CTNS_RFF_ID: vport->ct_flags &= ~FC_CT_RFF_ID; CtReq->CommandResponse.bits.CmdRsp = be16_to_cpu(SLI_CTNS_RFF_ID); - CtReq->un.rff.PortId = be32_to_cpu(vport->fc_myDID);; + CtReq->un.rff.PortId = cpu_to_be32(vport->fc_myDID);; CtReq->un.rff.fbits = FC4_FEATURE_INIT; CtReq->un.rff.type_code = FC_FCP_DATA; cmpl = lpfc_cmpl_ct_cmd_rff_id; diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index f5e002435972..8da6e8be9d83 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -18,7 +18,7 @@ * more details, a copy of which can be found in the file COPYING * * included with this package. * *******************************************************************/ - +/* See Fibre Channel protocol T11 FC-LS for details */ #include #include #include @@ -392,11 +392,12 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, } if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) { lpfc_mbx_unreg_vpi(vport); + spin_lock_irq(shost->host_lock); vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; + spin_unlock_irq(shost->host_lock); } } - ndlp->nlp_sid = irsp->un.ulpWord[4] & Mask_DID; lpfc_nlp_set_state(vport, ndlp, NLP_STE_REG_LOGIN_ISSUE); if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED && @@ -484,6 +485,9 @@ lpfc_cmpl_els_flogi_nport(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, lpfc_nlp_put(ndlp); } + /* If we are pt2pt with another NPort, force NPIV off! */ + phba->sli3_options &= ~LPFC_SLI3_NPIV_ENABLED; + spin_lock_irq(shost->host_lock); vport->fc_flag |= FC_PT2PT; spin_unlock_irq(shost->host_lock); @@ -2068,7 +2072,7 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, return 0; } -int +static int lpfc_els_free_data(struct lpfc_hba *phba, struct lpfc_dmabuf *buf_ptr1) { struct lpfc_dmabuf *buf_ptr; @@ -2086,7 +2090,7 @@ lpfc_els_free_data(struct lpfc_hba *phba, struct lpfc_dmabuf *buf_ptr1) return 0; } -int +static int lpfc_els_free_bpl(struct lpfc_hba *phba, struct lpfc_dmabuf *buf_ptr) { lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys); @@ -2976,10 +2980,10 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, "RCV RSCN defer: did:x%x/ste:x%x flg:x%x", ndlp->nlp_DID, vport->port_state, ndlp->nlp_flag); + spin_lock_irq(shost->host_lock); vport->fc_flag |= FC_RSCN_DEFERRED; if ((rscn_cnt < FC_MAX_HOLD_RSCN) && !(vport->fc_flag & FC_RSCN_DISCOVERY)) { - spin_lock_irq(shost->host_lock); vport->fc_flag |= FC_RSCN_MODE; spin_unlock_irq(shost->host_lock); if (rscn_cnt) { @@ -3008,7 +3012,6 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, vport->fc_rscn_id_cnt, vport->fc_flag, vport->port_state); } else { - spin_lock_irq(shost->host_lock); vport->fc_flag |= FC_RSCN_DISCOVERY; spin_unlock_irq(shost->host_lock); /* ReDiscovery RSCN */ @@ -3023,7 +3026,9 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, /* send RECOVERY event for ALL nodes that match RSCN payload */ lpfc_rscn_recovery_check(vport); + spin_lock_irq(shost->host_lock); vport->fc_flag &= ~FC_RSCN_DEFERRED; + spin_unlock_irq(shost->host_lock); return 0; } @@ -3307,13 +3312,13 @@ lpfc_els_rsp_rps_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) status |= 0x4; rps_rsp->rsvd1 = 0; - rps_rsp->portStatus = be16_to_cpu(status); - rps_rsp->linkFailureCnt = be32_to_cpu(mb->un.varRdLnk.linkFailureCnt); - rps_rsp->lossSyncCnt = be32_to_cpu(mb->un.varRdLnk.lossSyncCnt); - rps_rsp->lossSignalCnt = be32_to_cpu(mb->un.varRdLnk.lossSignalCnt); - rps_rsp->primSeqErrCnt = be32_to_cpu(mb->un.varRdLnk.primSeqErrCnt); - rps_rsp->invalidXmitWord = be32_to_cpu(mb->un.varRdLnk.invalidXmitWord); - rps_rsp->crcCnt = be32_to_cpu(mb->un.varRdLnk.crcCnt); + rps_rsp->portStatus = cpu_to_be16(status); + rps_rsp->linkFailureCnt = cpu_to_be32(mb->un.varRdLnk.linkFailureCnt); + rps_rsp->lossSyncCnt = cpu_to_be32(mb->un.varRdLnk.lossSyncCnt); + rps_rsp->lossSignalCnt = cpu_to_be32(mb->un.varRdLnk.lossSignalCnt); + rps_rsp->primSeqErrCnt = cpu_to_be32(mb->un.varRdLnk.primSeqErrCnt); + rps_rsp->invalidXmitWord = cpu_to_be32(mb->un.varRdLnk.invalidXmitWord); + rps_rsp->crcCnt = cpu_to_be32(mb->un.varRdLnk.crcCnt); /* Xmit ELS RPS ACC response tag */ lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_ELS, "0118 Xmit ELS RPS ACC response tag x%x xri x%x, " @@ -4276,7 +4281,9 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2; MAILBOX_t *mb = &pmb->mb; + spin_lock_irq(shost->host_lock); vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI; + spin_unlock_irq(shost->host_lock); lpfc_nlp_put(ndlp); if (mb->mbxStatus) { @@ -4297,7 +4304,9 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) default: /* Try to recover from this error */ lpfc_mbx_unreg_vpi(vport); + spin_lock_irq(shost->host_lock); vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; + spin_unlock_irq(shost->host_lock); lpfc_initial_fdisc(vport); break; } @@ -4316,6 +4325,7 @@ static void lpfc_register_new_vport(struct lpfc_hba *phba, struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) { + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); LPFC_MBOXQ_t *mbox; mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); @@ -4327,7 +4337,9 @@ lpfc_register_new_vport(struct lpfc_hba *phba, struct lpfc_vport *vport, if (lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT) == MBX_NOT_FINISHED) { mempool_free(mbox, phba->mbox_mem_pool); + spin_lock_irq(shost->host_lock); vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI; + spin_unlock_irq(shost->host_lock); lpfc_vport_set_state(vport, FC_VPORT_FAILED); lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX, @@ -4339,7 +4351,9 @@ lpfc_register_new_vport(struct lpfc_hba *phba, struct lpfc_vport *vport, lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX, "0254 Register VPI: no memory\n"); + spin_lock_irq(shost->host_lock); vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI; + spin_unlock_irq(shost->host_lock); lpfc_nlp_put(ndlp); } } @@ -4412,7 +4426,9 @@ lpfc_cmpl_els_fdisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, lpfc_unreg_rpi(vport, np); } lpfc_mbx_unreg_vpi(vport); + spin_lock_irq(shost->host_lock); vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; + spin_unlock_irq(shost->host_lock); } if (vport->fc_flag & FC_VPORT_NEEDS_REG_VPI) diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index f2b8bc49fe52..644d96012d56 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -114,15 +114,8 @@ lpfc_dev_loss_tmo_callbk(struct fc_rport *rport) rdata = rport->dd_data; ndlp = rdata->pnode; - - if (!ndlp) { - if (rport->scsi_target_id != -1) { - printk(KERN_ERR "Cannot find remote node" - " for rport in dev_loss_tmo_callbk x%x\n", - rport->port_id); - } + if (!ndlp) return; - } vport = ndlp->vport; phba = vport->phba; @@ -202,6 +195,12 @@ lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp) * appropriately we just need to cleanup the ndlp rport info here. */ if (vport->load_flag & FC_UNLOADING) { + if (ndlp->nlp_sid != NLP_NO_SID) { + /* flush the target */ + lpfc_sli_abort_iocb(vport, + &phba->sli.ring[phba->sli.fcp_ring], + ndlp->nlp_sid, 0, LPFC_CTX_TGT); + } put_node = rdata->pnode != NULL; put_rport = ndlp->rport != NULL; rdata->pnode = NULL; @@ -381,7 +380,7 @@ lpfc_work_done(struct lpfc_hba *phba) lpfc_handle_latt(phba); vports = lpfc_create_vport_work_array(phba); if (vports != NULL) - for(i = 0; i < LPFC_MAX_VPORTS; i++) { + for(i = 0; i <= phba->max_vpi; i++) { /* * We could have no vports in array if unloading, so if * this happens then just use the pport @@ -413,7 +412,7 @@ lpfc_work_done(struct lpfc_hba *phba) vport->work_port_events &= ~work_port_events; spin_unlock_irq(&vport->work_port_lock); } - lpfc_destroy_vport_work_array(vports); + lpfc_destroy_vport_work_array(phba, vports); pring = &phba->sli.ring[LPFC_ELS_RING]; status = (ha_copy & (HA_RXMASK << (4*LPFC_ELS_RING))); @@ -552,6 +551,7 @@ lpfc_workq_post_event(struct lpfc_hba *phba, void *arg1, void *arg2, void lpfc_cleanup_rpis(struct lpfc_vport *vport, int remove) { + struct Scsi_Host *shost = lpfc_shost_from_vport(vport); struct lpfc_hba *phba = vport->phba; struct lpfc_nodelist *ndlp, *next_ndlp; int rc; @@ -575,7 +575,9 @@ lpfc_cleanup_rpis(struct lpfc_vport *vport, int remove) } if (phba->sli3_options & LPFC_SLI3_VPORT_TEARDOWN) { lpfc_mbx_unreg_vpi(vport); + spin_lock_irq(shost->host_lock); vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; + spin_unlock_irq(shost->host_lock); } } @@ -629,11 +631,11 @@ lpfc_linkdown(struct lpfc_hba *phba) spin_unlock_irq(&phba->hbalock); vports = lpfc_create_vport_work_array(phba); if (vports != NULL) - for(i = 0; i < LPFC_MAX_VPORTS && vports[i] != NULL; i++) { + for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { /* Issue a LINK DOWN event to all nodes */ lpfc_linkdown_port(vports[i]); } - lpfc_destroy_vport_work_array(vports); + lpfc_destroy_vport_work_array(phba, vports); /* Clean up any firmware default rpi's */ mb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (mb) { @@ -738,9 +740,9 @@ lpfc_linkup(struct lpfc_hba *phba) vports = lpfc_create_vport_work_array(phba); if (vports != NULL) - for(i = 0; i < LPFC_MAX_VPORTS && vports[i] != NULL; i++) + for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) lpfc_linkup_port(vports[i]); - lpfc_destroy_vport_work_array(vports); + lpfc_destroy_vport_work_array(phba, vports); if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) lpfc_issue_clear_la(phba, phba->pport); @@ -1319,7 +1321,7 @@ lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) vports = lpfc_create_vport_work_array(phba); if (vports != NULL) for(i = 0; - i < LPFC_MAX_VPORTS && vports[i] != NULL; + i <= phba->max_vpi && vports[i] != NULL; i++) { if (vports[i]->port_type == LPFC_PHYSICAL_PORT) continue; @@ -1335,7 +1337,7 @@ lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) "Fabric support\n"); } } - lpfc_destroy_vport_work_array(vports); + lpfc_destroy_vport_work_array(phba, vports); lpfc_do_scr_ns_plogi(phba, vport); } @@ -1902,7 +1904,8 @@ lpfc_unreg_all_rpis(struct lpfc_vport *vport) lpfc_unreg_login(phba, vport->vpi, 0xffff, mbox); mbox->vport = vport; mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; - rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); + mbox->context1 = NULL; + rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO); if (rc == MBX_NOT_FINISHED) { mempool_free(mbox, phba->mbox_mem_pool); } @@ -1921,7 +1924,8 @@ lpfc_unreg_default_rpis(struct lpfc_vport *vport) lpfc_unreg_did(phba, vport->vpi, 0xffffffff, mbox); mbox->vport = vport; mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; - rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); + mbox->context1 = NULL; + rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO); if (rc == MBX_NOT_FINISHED) { lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT, "1815 Could not issue " @@ -2026,7 +2030,7 @@ lpfc_nlp_remove(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) mbox->mbox_flag |= LPFC_MBX_IMED_UNREG; mbox->mbox_cmpl = lpfc_mbx_cmpl_dflt_rpi; mbox->vport = vport; - mbox->context2 = 0; + mbox->context2 = NULL; rc =lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); if (rc == MBX_NOT_FINISHED) { mempool_free(mbox, phba->mbox_mem_pool); @@ -2702,12 +2706,14 @@ restart_disc: clrlaerr = 1; break; + case LPFC_LINK_UP: + lpfc_issue_clear_la(phba, vport); + /* Drop thru */ case LPFC_LINK_UNKNOWN: case LPFC_WARM_START: case LPFC_INIT_START: case LPFC_INIT_MBX_CMDS: case LPFC_LINK_DOWN: - case LPFC_LINK_UP: case LPFC_HBA_ERROR: lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, "0230 Unexpected timeout, hba link " diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index b61e45a1310d..f78d23a3b667 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -1279,7 +1279,7 @@ typedef struct { /* FireFly BIU registers */ #define MBX_DEL_LD_ENTRY 0x1D #define MBX_RUN_PROGRAM 0x1E #define MBX_SET_MASK 0x20 -#define MBX_SET_SLIM 0x21 +#define MBX_SET_VARIABLE 0x21 #define MBX_UNREG_D_ID 0x23 #define MBX_KILL_BOARD 0x24 #define MBX_CONFIG_FARP 0x25 @@ -1301,7 +1301,7 @@ typedef struct { /* FireFly BIU registers */ #define MBX_REG_VNPID 0x96 #define MBX_UNREG_VNPID 0x97 -#define MBX_FLASH_WR_ULA 0x98 +#define MBX_WRITE_WWN 0x98 #define MBX_SET_DEBUG 0x99 #define MBX_LOAD_EXP_ROM 0x9C @@ -3227,6 +3227,8 @@ lpfc_is_LC_HBA(unsigned short device) (device == PCI_DEVICE_ID_BSMB) || (device == PCI_DEVICE_ID_ZMID) || (device == PCI_DEVICE_ID_ZSMB) || + (device == PCI_DEVICE_ID_SAT_MID) || + (device == PCI_DEVICE_ID_SAT_SMB) || (device == PCI_DEVICE_ID_RFLY)) return 1; else diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index c6b30a8617bc..e17bb900aad1 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -484,6 +484,9 @@ lpfc_hba_down_post(struct lpfc_hba *phba) struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; struct lpfc_dmabuf *mp, *next_mp; + struct lpfc_iocbq *iocb; + IOCB_t *cmd = NULL; + LIST_HEAD(completions); int i; if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) @@ -499,10 +502,36 @@ lpfc_hba_down_post(struct lpfc_hba *phba) } } + spin_lock_irq(&phba->hbalock); for (i = 0; i < psli->num_rings; i++) { pring = &psli->ring[i]; + + /* At this point in time the HBA is either reset or DOA. Either + * way, nothing should be on txcmplq as it will NEVER complete. + */ + list_splice_init(&pring->txcmplq, &completions); + pring->txcmplq_cnt = 0; + spin_unlock_irq(&phba->hbalock); + + while (!list_empty(&completions)) { + iocb = list_get_first(&completions, struct lpfc_iocbq, + list); + cmd = &iocb->iocb; + list_del_init(&iocb->list); + + if (!iocb->iocb_cmpl) + lpfc_sli_release_iocbq(phba, iocb); + else { + cmd->ulpStatus = IOSTAT_LOCAL_REJECT; + cmd->un.ulpWord[4] = IOERR_SLI_ABORTED; + (iocb->iocb_cmpl) (phba, iocb, iocb); + } + } + lpfc_sli_abort_iocb_ring(phba, pring); + spin_lock_irq(&phba->hbalock); } + spin_unlock_irq(&phba->hbalock); return 0; } @@ -641,6 +670,26 @@ lpfc_hb_timeout_handler(struct lpfc_hba *phba) } } +static void +lpfc_offline_eratt(struct lpfc_hba *phba) +{ + struct lpfc_sli *psli = &phba->sli; + + spin_lock_irq(&phba->hbalock); + psli->sli_flag &= ~LPFC_SLI2_ACTIVE; + spin_unlock_irq(&phba->hbalock); + lpfc_offline_prep(phba); + + lpfc_offline(phba); + lpfc_reset_barrier(phba); + lpfc_sli_brdreset(phba); + lpfc_hba_down_post(phba); + lpfc_sli_brdready(phba, HS_MBRDY); + lpfc_unblock_mgmt_io(phba); + phba->link_state = LPFC_HBA_ERROR; + return; +} + /************************************************************************/ /* */ /* lpfc_handle_eratt */ @@ -681,14 +730,14 @@ lpfc_handle_eratt(struct lpfc_hba *phba) vports = lpfc_create_vport_work_array(phba); if (vports != NULL) for(i = 0; - i < LPFC_MAX_VPORTS && vports[i] != NULL; + i <= phba->max_vpi && vports[i] != NULL; i++){ shost = lpfc_shost_from_vport(vports[i]); spin_lock_irq(shost->host_lock); vports[i]->fc_flag |= FC_ESTABLISH_LINK; spin_unlock_irq(shost->host_lock); } - lpfc_destroy_vport_work_array(vports); + lpfc_destroy_vport_work_array(phba, vports); spin_lock_irq(&phba->hbalock); psli->sli_flag &= ~LPFC_SLI2_ACTIVE; spin_unlock_irq(&phba->hbalock); @@ -737,14 +786,9 @@ lpfc_handle_eratt(struct lpfc_hba *phba) | PCI_VENDOR_ID_EMULEX); spin_lock_irq(&phba->hbalock); - psli->sli_flag &= ~LPFC_SLI2_ACTIVE; phba->over_temp_state = HBA_OVER_TEMP; spin_unlock_irq(&phba->hbalock); - lpfc_offline_prep(phba); - lpfc_offline(phba); - lpfc_unblock_mgmt_io(phba); - phba->link_state = LPFC_HBA_ERROR; - lpfc_hba_down_post(phba); + lpfc_offline_eratt(phba); } else { /* The if clause above forces this code path when the status @@ -763,14 +807,7 @@ lpfc_handle_eratt(struct lpfc_hba *phba) sizeof(event_data), (char *) &event_data, SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX); - spin_lock_irq(&phba->hbalock); - psli->sli_flag &= ~LPFC_SLI2_ACTIVE; - spin_unlock_irq(&phba->hbalock); - lpfc_offline_prep(phba); - lpfc_offline(phba); - lpfc_unblock_mgmt_io(phba); - phba->link_state = LPFC_HBA_ERROR; - lpfc_hba_down_post(phba); + lpfc_offline_eratt(phba); } } @@ -790,21 +827,25 @@ lpfc_handle_latt(struct lpfc_hba *phba) LPFC_MBOXQ_t *pmb; volatile uint32_t control; struct lpfc_dmabuf *mp; - int rc = -ENOMEM; + int rc = 0; pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); - if (!pmb) + if (!pmb) { + rc = 1; goto lpfc_handle_latt_err_exit; + } mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); - if (!mp) + if (!mp) { + rc = 2; goto lpfc_handle_latt_free_pmb; + } mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys); - if (!mp->virt) + if (!mp->virt) { + rc = 3; goto lpfc_handle_latt_free_mp; - - rc = -EIO; + } /* Cleanup any outstanding ELS commands */ lpfc_els_flush_all_cmd(phba); @@ -814,8 +855,10 @@ lpfc_handle_latt(struct lpfc_hba *phba) pmb->mbox_cmpl = lpfc_mbx_cmpl_read_la; pmb->vport = vport; rc = lpfc_sli_issue_mbox (phba, pmb, MBX_NOWAIT); - if (rc == MBX_NOT_FINISHED) + if (rc == MBX_NOT_FINISHED) { + rc = 4; goto lpfc_handle_latt_free_mbuf; + } /* Clear Link Attention in HA REG */ spin_lock_irq(&phba->hbalock); @@ -847,10 +890,8 @@ lpfc_handle_latt_err_exit: lpfc_linkdown(phba); phba->link_state = LPFC_HBA_ERROR; - /* The other case is an error from issue_mbox */ - if (rc == -ENOMEM) - lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX, - "0300 READ_LA: no buffers\n"); + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX, + "0300 LATT: Cannot issue READ_LA: Data:%d\n", rc); return; } @@ -1421,14 +1462,14 @@ lpfc_establish_link_tmo(unsigned long ptr) phba->pport->fc_flag, phba->pport->port_state); vports = lpfc_create_vport_work_array(phba); if (vports != NULL) - for(i = 0; i < LPFC_MAX_VPORTS && vports[i] != NULL; i++) { + for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { struct Scsi_Host *shost; shost = lpfc_shost_from_vport(vports[i]); spin_lock_irqsave(shost->host_lock, iflag); vports[i]->fc_flag &= ~FC_ESTABLISH_LINK; spin_unlock_irqrestore(shost->host_lock, iflag); } - lpfc_destroy_vport_work_array(vports); + lpfc_destroy_vport_work_array(phba, vports); } void @@ -1493,7 +1534,7 @@ lpfc_online(struct lpfc_hba *phba) vports = lpfc_create_vport_work_array(phba); if (vports != NULL) - for(i = 0; i < LPFC_MAX_VPORTS && vports[i] != NULL; i++) { + for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { struct Scsi_Host *shost; shost = lpfc_shost_from_vport(vports[i]); spin_lock_irq(shost->host_lock); @@ -1502,7 +1543,7 @@ lpfc_online(struct lpfc_hba *phba) vports[i]->fc_flag |= FC_VPORT_NEEDS_REG_VPI; spin_unlock_irq(shost->host_lock); } - lpfc_destroy_vport_work_array(vports); + lpfc_destroy_vport_work_array(phba, vports); lpfc_unblock_mgmt_io(phba); return 0; @@ -1536,7 +1577,7 @@ lpfc_offline_prep(struct lpfc_hba * phba) /* Issue an unreg_login to all nodes on all vports */ vports = lpfc_create_vport_work_array(phba); if (vports != NULL) { - for(i = 0; i < LPFC_MAX_VPORTS && vports[i] != NULL; i++) { + for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { struct Scsi_Host *shost; if (vports[i]->load_flag & FC_UNLOADING) @@ -1560,7 +1601,7 @@ lpfc_offline_prep(struct lpfc_hba * phba) } } } - lpfc_destroy_vport_work_array(vports); + lpfc_destroy_vport_work_array(phba, vports); lpfc_sli_flush_mbox_queue(phba); } @@ -1579,9 +1620,9 @@ lpfc_offline(struct lpfc_hba *phba) lpfc_stop_phba_timers(phba); vports = lpfc_create_vport_work_array(phba); if (vports != NULL) - for(i = 0; i < LPFC_MAX_VPORTS && vports[i] != NULL; i++) + for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) lpfc_stop_vport_timers(vports[i]); - lpfc_destroy_vport_work_array(vports); + lpfc_destroy_vport_work_array(phba, vports); lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, "0460 Bring Adapter offline\n"); /* Bring down the SLI Layer and cleanup. The HBA is offline @@ -1592,14 +1633,14 @@ lpfc_offline(struct lpfc_hba *phba) spin_unlock_irq(&phba->hbalock); vports = lpfc_create_vport_work_array(phba); if (vports != NULL) - for(i = 0; i < LPFC_MAX_VPORTS && vports[i] != NULL; i++) { + for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { shost = lpfc_shost_from_vport(vports[i]); spin_lock_irq(shost->host_lock); vports[i]->work_port_events = 0; vports[i]->fc_flag |= FC_OFFLINE_MODE; spin_unlock_irq(shost->host_lock); } - lpfc_destroy_vport_work_array(vports); + lpfc_destroy_vport_work_array(phba, vports); } /****************************************************************************** @@ -2149,6 +2190,8 @@ lpfc_pci_remove_one(struct pci_dev *pdev) kfree(vport->vname); lpfc_free_sysfs_attr(vport); + kthread_stop(phba->worker_thread); + fc_remove_host(shost); scsi_remove_host(shost); lpfc_cleanup(vport); @@ -2168,8 +2211,6 @@ lpfc_pci_remove_one(struct pci_dev *pdev) lpfc_debugfs_terminate(vport); - kthread_stop(phba->worker_thread); - /* Release the irq reservation */ free_irq(phba->pcidev->irq, phba); if (phba->using_msi) diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index 6b64e573ad4e..dfc63f6ccd7b 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -896,7 +896,7 @@ lpfc_mbox_tmo_val(struct lpfc_hba *phba, int cmd) case MBX_DOWN_LOAD: /* 0x1C */ case MBX_DEL_LD_ENTRY: /* 0x1D */ case MBX_LOAD_AREA: /* 0x81 */ - case MBX_FLASH_WR_ULA: /* 0x98 */ + case MBX_WRITE_WWN: /* 0x98 */ case MBX_LOAD_EXP_ROM: /* 0x9C */ return LPFC_MBOX_TMO_FLASH_CMD; } diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c index 43c3b8a0d76a..6dc5ab8d6716 100644 --- a/drivers/scsi/lpfc/lpfc_mem.c +++ b/drivers/scsi/lpfc/lpfc_mem.c @@ -98,6 +98,7 @@ lpfc_mem_alloc(struct lpfc_hba * phba) fail_free_hbq_pool: lpfc_sli_hbqbuf_free_all(phba); + pci_pool_destroy(phba->lpfc_hbq_pool); fail_free_nlp_mem_pool: mempool_destroy(phba->nlp_mem_pool); phba->nlp_mem_pool = NULL; diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index c987c4fcdadc..648795806a83 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -130,7 +130,7 @@ lpfc_ramp_down_queue_handler(struct lpfc_hba *phba) vports = lpfc_create_vport_work_array(phba); if (vports != NULL) - for(i = 0; i < LPFC_MAX_VPORTS && vports[i] != NULL; i++) { + for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { shost = lpfc_shost_from_vport(vports[i]); shost_for_each_device(sdev, shost) { new_queue_depth = @@ -151,7 +151,7 @@ lpfc_ramp_down_queue_handler(struct lpfc_hba *phba) new_queue_depth); } } - lpfc_destroy_vport_work_array(vports); + lpfc_destroy_vport_work_array(phba, vports); atomic_set(&phba->num_rsrc_err, 0); atomic_set(&phba->num_cmd_success, 0); } @@ -166,7 +166,7 @@ lpfc_ramp_up_queue_handler(struct lpfc_hba *phba) vports = lpfc_create_vport_work_array(phba); if (vports != NULL) - for(i = 0; i < LPFC_MAX_VPORTS && vports[i] != NULL; i++) { + for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { shost = lpfc_shost_from_vport(vports[i]); shost_for_each_device(sdev, shost) { if (sdev->ordered_tags) @@ -179,7 +179,7 @@ lpfc_ramp_up_queue_handler(struct lpfc_hba *phba) sdev->queue_depth+1); } } - lpfc_destroy_vport_work_array(vports); + lpfc_destroy_vport_work_array(phba, vports); atomic_set(&phba->num_rsrc_err, 0); atomic_set(&phba->num_cmd_success, 0); } @@ -380,7 +380,7 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) (num_bde * sizeof (struct ulp_bde64)); iocb_cmd->ulpBdeCount = 1; iocb_cmd->ulpLe = 1; - fcp_cmnd->fcpDl = be32_to_cpu(scsi_bufflen(scsi_cmnd)); + fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd)); return 0; } @@ -763,6 +763,8 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, piocbq->iocb.ulpContext = pnode->nlp_rpi; if (pnode->nlp_fcp_info & NLP_FCP_2_DEVICE) piocbq->iocb.ulpFCP2Rcvy = 1; + else + piocbq->iocb.ulpFCP2Rcvy = 0; piocbq->iocb.ulpClass = (pnode->nlp_fcp_info & 0x0f); piocbq->context1 = lpfc_cmd; diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 46d529d6ac6b..5a2cb484e137 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -716,7 +716,7 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand) case MBX_DEL_LD_ENTRY: case MBX_RUN_PROGRAM: case MBX_SET_MASK: - case MBX_SET_SLIM: + case MBX_SET_VARIABLE: case MBX_UNREG_D_ID: case MBX_KILL_BOARD: case MBX_CONFIG_FARP: @@ -728,7 +728,7 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand) case MBX_READ_RPI64: case MBX_REG_LOGIN64: case MBX_READ_LA64: - case MBX_FLASH_WR_ULA: + case MBX_WRITE_WWN: case MBX_SET_DEBUG: case MBX_LOAD_EXP_ROM: case MBX_ASYNCEVT_ENABLE: @@ -2182,7 +2182,10 @@ lpfc_sli_chipset_init(struct lpfc_hba *phba) */ lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0436 Adapter failed to init, " - "timeout, status reg x%x\n", status); + "timeout, status reg x%x, " + "FW Data: A8 x%x AC x%x\n", status, + readl(phba->MBslimaddr + 0xa8), + readl(phba->MBslimaddr + 0xac)); phba->link_state = LPFC_HBA_ERROR; return -ETIMEDOUT; } @@ -2194,7 +2197,10 @@ lpfc_sli_chipset_init(struct lpfc_hba *phba) */ lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0437 Adapter failed to init, " - "chipset, status reg x%x\n", status); + "chipset, status reg x%x, " + "FW Data: A8 x%x AC x%x\n", status, + readl(phba->MBslimaddr + 0xa8), + readl(phba->MBslimaddr + 0xac)); phba->link_state = LPFC_HBA_ERROR; return -EIO; } @@ -2222,7 +2228,10 @@ lpfc_sli_chipset_init(struct lpfc_hba *phba) /* Adapter failed to init, chipset, status reg */ lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0438 Adapter failed to init, chipset, " - "status reg x%x\n", status); + "status reg x%x, " + "FW Data: A8 x%x AC x%x\n", status, + readl(phba->MBslimaddr + 0xa8), + readl(phba->MBslimaddr + 0xac)); phba->link_state = LPFC_HBA_ERROR; return -EIO; } @@ -2581,6 +2590,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) uint32_t status, evtctr; uint32_t ha_copy; int i; + unsigned long timeout; unsigned long drvr_flag = 0; volatile uint32_t word0, ldata; void __iomem *to_slim; @@ -2756,18 +2766,24 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) } wmb(); - /* interrupt board to doit right away */ - writel(CA_MBATT, phba->CAregaddr); - readl(phba->CAregaddr); /* flush */ switch (flag) { case MBX_NOWAIT: - /* Don't wait for it to finish, just return */ + /* Set up reference to mailbox command */ psli->mbox_active = pmbox; + /* Interrupt board to do it */ + writel(CA_MBATT, phba->CAregaddr); + readl(phba->CAregaddr); /* flush */ + /* Don't wait for it to finish, just return */ break; case MBX_POLL: + /* Set up null reference to mailbox command */ psli->mbox_active = NULL; + /* Interrupt board to do it */ + writel(CA_MBATT, phba->CAregaddr); + readl(phba->CAregaddr); /* flush */ + if (psli->sli_flag & LPFC_SLI2_ACTIVE) { /* First read mbox status word */ word0 = *((volatile uint32_t *)&phba->slim2p->mbx); @@ -2779,15 +2795,15 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) /* Read the HBA Host Attention Register */ ha_copy = readl(phba->HAregaddr); - - i = lpfc_mbox_tmo_val(phba, mb->mbxCommand); - i *= 1000; /* Convert to ms */ - + timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, + mb->mbxCommand) * + 1000) + jiffies; + i = 0; /* Wait for command to complete */ while (((word0 & OWN_CHIP) == OWN_CHIP) || (!(ha_copy & HA_MBATT) && (phba->link_state > LPFC_WARM_START))) { - if (i-- <= 0) { + if (time_after(jiffies, timeout)) { psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE; spin_unlock_irqrestore(&phba->hbalock, drvr_flag); @@ -2800,12 +2816,12 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) && (evtctr != psli->slistat.mbox_event)) break; - spin_unlock_irqrestore(&phba->hbalock, - drvr_flag); - - msleep(1); - - spin_lock_irqsave(&phba->hbalock, drvr_flag); + if (i++ > 10) { + spin_unlock_irqrestore(&phba->hbalock, + drvr_flag); + msleep(1); + spin_lock_irqsave(&phba->hbalock, drvr_flag); + } if (psli->sli_flag & LPFC_SLI2_ACTIVE) { /* First copy command data */ @@ -3065,7 +3081,7 @@ lpfc_sli_async_event_handler(struct lpfc_hba * phba, if (evt_code == ASYNC_TEMP_WARN) { temp_event_data.event_code = LPFC_THRESHOLD_TEMP; lpfc_printf_log(phba, - KERN_WARNING, + KERN_ERR, LOG_TEMP, "0347 Adapter is very hot, please take " "corrective action. temperature : %d Celsius\n", @@ -3074,7 +3090,7 @@ lpfc_sli_async_event_handler(struct lpfc_hba * phba, if (evt_code == ASYNC_TEMP_SAFE) { temp_event_data.event_code = LPFC_NORMAL_TEMP; lpfc_printf_log(phba, - KERN_INFO, + KERN_ERR, LOG_TEMP, "0340 Adapter temperature is OK now. " "temperature : %d Celsius\n", @@ -4047,7 +4063,6 @@ lpfc_intr_handler(int irq, void *dev_id) } if (work_ha_copy & HA_ERATT) { - phba->link_state = LPFC_HBA_ERROR; /* * There was a link/board error. Read the * status register to retrieve the error event @@ -4079,7 +4094,7 @@ lpfc_intr_handler(int irq, void *dev_id) * Stray Mailbox Interrupt, mbxCommand * mbxStatus */ - lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, "(%d):0304 Stray Mailbox " "Interrupt mbxCommand x%x " @@ -4087,51 +4102,60 @@ lpfc_intr_handler(int irq, void *dev_id) (vport ? vport->vpi : 0), pmbox->mbxCommand, pmbox->mbxStatus); - } - phba->last_completion_time = jiffies; - del_timer_sync(&phba->sli.mbox_tmo); - - phba->sli.mbox_active = NULL; - if (pmb->mbox_cmpl) { - lpfc_sli_pcimem_bcopy(mbox, pmbox, - MAILBOX_CMD_SIZE); - } - if (pmb->mbox_flag & LPFC_MBX_IMED_UNREG) { - pmb->mbox_flag &= ~LPFC_MBX_IMED_UNREG; + /* clear mailbox attention bit */ + work_ha_copy &= ~HA_MBATT; + } else { + phba->last_completion_time = jiffies; + del_timer(&phba->sli.mbox_tmo); - lpfc_debugfs_disc_trc(vport, - LPFC_DISC_TRC_MBOX_VPORT, - "MBOX dflt rpi: : status:x%x rpi:x%x", - (uint32_t)pmbox->mbxStatus, - pmbox->un.varWords[0], 0); - - if ( !pmbox->mbxStatus) { - mp = (struct lpfc_dmabuf *) - (pmb->context1); - ndlp = (struct lpfc_nodelist *) - pmb->context2; - - /* Reg_LOGIN of dflt RPI was successful. - * new lets get rid of the RPI using the - * same mbox buffer. - */ - lpfc_unreg_login(phba, vport->vpi, - pmbox->un.varWords[0], pmb); - pmb->mbox_cmpl = lpfc_mbx_cmpl_dflt_rpi; - pmb->context1 = mp; - pmb->context2 = ndlp; - pmb->vport = vport; - spin_lock(&phba->hbalock); - phba->sli.sli_flag &= - ~LPFC_SLI_MBOX_ACTIVE; - spin_unlock(&phba->hbalock); - goto send_current_mbox; + phba->sli.mbox_active = NULL; + if (pmb->mbox_cmpl) { + lpfc_sli_pcimem_bcopy(mbox, pmbox, + MAILBOX_CMD_SIZE); + } + if (pmb->mbox_flag & LPFC_MBX_IMED_UNREG) { + pmb->mbox_flag &= ~LPFC_MBX_IMED_UNREG; + + lpfc_debugfs_disc_trc(vport, + LPFC_DISC_TRC_MBOX_VPORT, + "MBOX dflt rpi: : " + "status:x%x rpi:x%x", + (uint32_t)pmbox->mbxStatus, + pmbox->un.varWords[0], 0); + + if (!pmbox->mbxStatus) { + mp = (struct lpfc_dmabuf *) + (pmb->context1); + ndlp = (struct lpfc_nodelist *) + pmb->context2; + + /* Reg_LOGIN of dflt RPI was + * successful. new lets get + * rid of the RPI using the + * same mbox buffer. + */ + lpfc_unreg_login(phba, + vport->vpi, + pmbox->un.varWords[0], + pmb); + pmb->mbox_cmpl = + lpfc_mbx_cmpl_dflt_rpi; + pmb->context1 = mp; + pmb->context2 = ndlp; + pmb->vport = vport; + spin_lock(&phba->hbalock); + phba->sli.sli_flag &= + ~LPFC_SLI_MBOX_ACTIVE; + spin_unlock(&phba->hbalock); + goto send_current_mbox; + } } + spin_lock(&phba->pport->work_port_lock); + phba->pport->work_port_events &= + ~WORKER_MBOX_TMO; + spin_unlock(&phba->pport->work_port_lock); + lpfc_mbox_cmpl_put(phba, pmb); } - spin_lock(&phba->pport->work_port_lock); - phba->pport->work_port_events &= ~WORKER_MBOX_TMO; - spin_unlock(&phba->pport->work_port_lock); - lpfc_mbox_cmpl_put(phba, pmb); } if ((work_ha_copy & HA_MBATT) && (phba->sli.mbox_active == NULL)) { diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c index 07a28700cbe7..9fad7663c117 100644 --- a/drivers/scsi/lpfc/lpfc_vport.c +++ b/drivers/scsi/lpfc/lpfc_vport.c @@ -562,7 +562,7 @@ lpfc_create_vport_work_array(struct lpfc_hba *phba) struct lpfc_vport *port_iterator; struct lpfc_vport **vports; int index = 0; - vports = kzalloc(LPFC_MAX_VPORTS * sizeof(struct lpfc_vport *), + vports = kzalloc((phba->max_vpi + 1) * sizeof(struct lpfc_vport *), GFP_KERNEL); if (vports == NULL) return NULL; @@ -581,12 +581,12 @@ lpfc_create_vport_work_array(struct lpfc_hba *phba) } void -lpfc_destroy_vport_work_array(struct lpfc_vport **vports) +lpfc_destroy_vport_work_array(struct lpfc_hba *phba, struct lpfc_vport **vports) { int i; if (vports == NULL) return; - for (i=0; vports[i] != NULL && i < LPFC_MAX_VPORTS; i++) + for (i=0; vports[i] != NULL && i <= phba->max_vpi; i++) scsi_host_put(lpfc_shost_from_vport(vports[i])); kfree(vports); } diff --git a/drivers/scsi/lpfc/lpfc_vport.h b/drivers/scsi/lpfc/lpfc_vport.h index 91da17751a37..96c445333b69 100644 --- a/drivers/scsi/lpfc/lpfc_vport.h +++ b/drivers/scsi/lpfc/lpfc_vport.h @@ -89,7 +89,7 @@ int lpfc_vport_delete(struct fc_vport *); int lpfc_vport_getinfo(struct Scsi_Host *, struct vport_info *); int lpfc_vport_tgt_remove(struct Scsi_Host *, uint, uint); struct lpfc_vport **lpfc_create_vport_work_array(struct lpfc_hba *); -void lpfc_destroy_vport_work_array(struct lpfc_vport **); +void lpfc_destroy_vport_work_array(struct lpfc_hba *, struct lpfc_vport **); /* * queuecommand VPORT-specific return codes. Specified in the host byte code. -- cgit v1.2.3-59-g8ed1b From 8a4df120b0712a12134d0d9435ccaec1c12b07a7 Mon Sep 17 00:00:00 2001 From: Tomohiro Kusumi Date: Fri, 11 Jan 2008 01:53:00 -0500 Subject: [SCSI] lpfc 8.2.4 : Make lpfc legacy I/O port free This is a patch written by Tomohiro Kusumi and submitted to linux-scsi: http://marc.info/?l=linux-scsi&m=118673720712152&w=2 The original patch comment: This patch makes Emulex lpfc driver legacy I/O port free. It has already been acked quite long time ago. So I resubmit the patch. http://lkml.org/lkml/2006/11/22/28 Current lpfc driver is already using pci_select_bars() and pci_enable_device_bars() when the PCI bus has been reset. So I think this patch should also be acked. Signed-off-by: Tomohiro Kusumi Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_init.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index e17bb900aad1..3205f7488d1c 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -1892,10 +1892,11 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) int error = -ENODEV, retval; int i, hbq_count; uint16_t iotag; + int bars = pci_select_bars(pdev, IORESOURCE_MEM); - if (pci_enable_device(pdev)) + if (pci_enable_device_bars(pdev, bars)) goto out; - if (pci_request_regions(pdev, LPFC_DRIVER_NAME)) + if (pci_request_selected_regions(pdev, bars, LPFC_DRIVER_NAME)) goto out_disable_device; phba = kzalloc(sizeof (struct lpfc_hba), GFP_KERNEL); @@ -2167,7 +2168,7 @@ out_idr_remove: out_free_phba: kfree(phba); out_release_regions: - pci_release_regions(pdev); + pci_release_selected_regions(pdev, bars); out_disable_device: pci_disable_device(pdev); out: @@ -2183,6 +2184,8 @@ lpfc_pci_remove_one(struct pci_dev *pdev) struct Scsi_Host *shost = pci_get_drvdata(pdev); struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; struct lpfc_hba *phba = vport->phba; + int bars = pci_select_bars(pdev, IORESOURCE_MEM); + spin_lock_irq(&phba->hbalock); vport->load_flag |= FC_UNLOADING; spin_unlock_irq(&phba->hbalock); @@ -2241,7 +2244,7 @@ lpfc_pci_remove_one(struct pci_dev *pdev) kfree(phba); - pci_release_regions(pdev); + pci_release_selected_regions(pdev, bars); pci_disable_device(pdev); } -- cgit v1.2.3-59-g8ed1b From 83108bd3826310def1e49330558467406c46b970 Mon Sep 17 00:00:00 2001 From: James Smart Date: Fri, 11 Jan 2008 01:53:09 -0500 Subject: [SCSI] lpfc 8.2.4 : Add additional sysfs and module parameters Made link speed and link topology modifiable via sysfs Make scatter gather Segment Count into a module parameter. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 3 +- drivers/scsi/lpfc/lpfc_attr.c | 113 ++++++++++++++++++++++++++++++++++++++---- drivers/scsi/lpfc/lpfc_scsi.c | 4 +- 3 files changed, 106 insertions(+), 14 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 2c3e171da8cb..80719bb3511e 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -29,7 +29,8 @@ struct lpfc_sli2_slim; #define LPFC_MAX_NS_RETRY 3 /* Number of retry attempts to contact the NameServer before giving up. */ #define LPFC_CMD_PER_LUN 3 /* max outstanding cmds per lun */ -#define LPFC_SG_SEG_CNT 64 /* sg element count per scsi cmnd */ +#define LPFC_DEFAULT_SG_SEG_CNT 64 /* sg element count per scsi cmnd */ +#define LPFC_MAX_SG_SEG_CNT 256 /* sg element count per scsi cmnd */ #define LPFC_IOCB_LIST_CNT 2250 /* list of IOCBs for fast-path usage. */ #define LPFC_Q_RAMP_UP_INTERVAL 120 /* lun q_depth ramp up interval */ diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index eb5a5ad4ffbf..4bae4a2ed2f1 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -45,6 +45,10 @@ #define LPFC_MIN_DEVLOSS_TMO 1 #define LPFC_MAX_DEVLOSS_TMO 255 +#define LPFC_MAX_LINK_SPEED 8 +#define LPFC_LINK_SPEED_BITMAP 0x00000117 +#define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8" + static void lpfc_jedec_to_ascii(int incr, char hdw[]) { @@ -258,8 +262,7 @@ lpfc_issue_lip(struct Scsi_Host *shost) int mbxstatus = MBXERR_ERROR; if ((vport->fc_flag & FC_OFFLINE_MODE) || - (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) || - (vport->port_state != LPFC_VPORT_READY)) + (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO)) return -EPERM; pmboxq = mempool_alloc(phba->mbox_mem_pool,GFP_KERNEL); @@ -1405,7 +1408,33 @@ LPFC_VPORT_ATTR_R(scan_down, 1, 0, 1, # Set loop mode if you want to run as an NL_Port. Value range is [0,0x6]. # Default value is 0. */ -LPFC_ATTR_RW(topology, 0, 0, 6, "Select Fibre Channel topology"); +static int +lpfc_topology_set(struct lpfc_hba *phba, int val) +{ + int err; + uint32_t prev_val; + if (val >= 0 && val <= 6) { + prev_val = phba->cfg_topology; + phba->cfg_topology = val; + err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport)); + if (err) + phba->cfg_topology = prev_val; + return err; + } + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "%d:0467 lpfc_topology attribute cannot be set to %d, " + "allowed range is [0, 6]\n", + phba->brd_no, val); + return -EINVAL; +} +static int lpfc_topology = 0; +module_param(lpfc_topology, int, 0); +MODULE_PARM_DESC(lpfc_topology, "Select Fibre Channel topology"); +lpfc_param_show(topology) +lpfc_param_init(topology, 0, 0, 6) +lpfc_param_store(topology) +static CLASS_DEVICE_ATTR(lpfc_topology, S_IRUGO | S_IWUSR, + lpfc_topology_show, lpfc_topology_store); /* # lpfc_link_speed: Link speed selection for initializing the Fibre Channel @@ -1417,7 +1446,59 @@ LPFC_ATTR_RW(topology, 0, 0, 6, "Select Fibre Channel topology"); # 8 = 8 Gigabaud # Value range is [0,8]. Default value is 0. */ -LPFC_ATTR_R(link_speed, 0, 0, 8, "Select link speed"); +static int +lpfc_link_speed_set(struct lpfc_hba *phba, int val) +{ + int err; + uint32_t prev_val; + + if (((val == LINK_SPEED_1G) && !(phba->lmt & LMT_1Gb)) || + ((val == LINK_SPEED_2G) && !(phba->lmt & LMT_2Gb)) || + ((val == LINK_SPEED_4G) && !(phba->lmt & LMT_4Gb)) || + ((val == LINK_SPEED_8G) && !(phba->lmt & LMT_8Gb)) || + ((val == LINK_SPEED_10G) && !(phba->lmt & LMT_10Gb))) + return -EINVAL; + + if ((val >= 0 && val <= LPFC_MAX_LINK_SPEED) + && (LPFC_LINK_SPEED_BITMAP & (1 << val))) { + prev_val = phba->cfg_link_speed; + phba->cfg_link_speed = val; + err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport)); + if (err) + phba->cfg_link_speed = prev_val; + return err; + } + + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "%d:0469 lpfc_link_speed attribute cannot be set to %d, " + "allowed range is [0, 8]\n", + phba->brd_no, val); + return -EINVAL; +} + +static int lpfc_link_speed = 0; +module_param(lpfc_link_speed, int, 0); +MODULE_PARM_DESC(lpfc_link_speed, "Select link speed"); +lpfc_param_show(link_speed) +static int +lpfc_link_speed_init(struct lpfc_hba *phba, int val) +{ + if ((val >= 0 && val <= LPFC_MAX_LINK_SPEED) + && (LPFC_LINK_SPEED_BITMAP & (1 << val))) { + phba->cfg_link_speed = val; + return 0; + } + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "0454 lpfc_link_speed attribute cannot " + "be set to %d, allowed values are " + "["LPFC_LINK_SPEED_STRING"]\n", val); + phba->cfg_link_speed = 0; + return -EINVAL; +} + +lpfc_param_store(link_speed) +static CLASS_DEVICE_ATTR(lpfc_link_speed, S_IRUGO | S_IWUSR, + lpfc_link_speed_show, lpfc_link_speed_store); /* # lpfc_fcp_class: Determines FC class to use for the FCP protocol. @@ -1531,6 +1612,15 @@ LPFC_ATTR_R(enable_hba_reset, 1, 0, 1, "Enable HBA resets from the driver."); */ LPFC_ATTR_R(enable_hba_heartbeat, 1, 0, 1, "Enable HBA Heartbeat."); +/* + * lpfc_sg_seg_cnt: Initial Maximum DMA Segment Count + * This value can be set to values between 64 and 256. The default value is + * 64, but may be increased to allow for larger Max I/O sizes. The scsi layer + * will be allowed to request I/Os of sizes up to (MAX_SEG_COUNT * SEG_SIZE). + */ +LPFC_ATTR_R(sg_seg_cnt, LPFC_DEFAULT_SG_SEG_CNT, LPFC_DEFAULT_SG_SEG_CNT, + LPFC_MAX_SG_SEG_CNT, "Max Scatter Gather Segment Count"); + struct class_device_attribute *lpfc_hba_attrs[] = { &class_device_attr_info, &class_device_attr_serialnum, @@ -1583,6 +1673,7 @@ struct class_device_attribute *lpfc_hba_attrs[] = { &class_device_attr_lpfc_soft_wwn_enable, &class_device_attr_lpfc_enable_hba_reset, &class_device_attr_lpfc_enable_hba_heartbeat, + &class_device_attr_lpfc_sg_seg_cnt, NULL, }; @@ -2490,18 +2581,18 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) phba->cfg_poll = lpfc_poll; phba->cfg_soft_wwnn = 0L; phba->cfg_soft_wwpn = 0L; - /* - * The total number of segments is the configuration value plus 2 - * since the IOCB need a command and response bde. - */ - phba->cfg_sg_seg_cnt = LPFC_SG_SEG_CNT + 2; + lpfc_sg_seg_cnt_init(phba, lpfc_sg_seg_cnt); + /* Also reinitialize the host templates with new values. */ + lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt; + lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt; /* * Since the sg_tablesize is module parameter, the sg_dma_buf_size - * used to create the sg_dma_buf_pool must be dynamically calculated + * used to create the sg_dma_buf_pool must be dynamically calculated. + * 2 segments are added since the IOCB needs a command and response bde. */ phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp) + - (phba->cfg_sg_seg_cnt * sizeof(struct ulp_bde64)); + ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct ulp_bde64)); lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth); return; } diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 648795806a83..6483c62730b3 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -1458,7 +1458,7 @@ struct scsi_host_template lpfc_template = { .slave_destroy = lpfc_slave_destroy, .scan_finished = lpfc_scan_finished, .this_id = -1, - .sg_tablesize = LPFC_SG_SEG_CNT, + .sg_tablesize = LPFC_DEFAULT_SG_SEG_CNT, .use_sg_chaining = ENABLE_SG_CHAINING, .cmd_per_lun = LPFC_CMD_PER_LUN, .use_clustering = ENABLE_CLUSTERING, @@ -1479,7 +1479,7 @@ struct scsi_host_template lpfc_vport_template = { .slave_destroy = lpfc_slave_destroy, .scan_finished = lpfc_scan_finished, .this_id = -1, - .sg_tablesize = LPFC_SG_SEG_CNT, + .sg_tablesize = LPFC_DEFAULT_SG_SEG_CNT, .cmd_per_lun = LPFC_CMD_PER_LUN, .use_clustering = ENABLE_CLUSTERING, .use_sg_chaining = ENABLE_SG_CHAINING, -- cgit v1.2.3-59-g8ed1b From 9c2face68782d5b7a322df6aade0512b47d29f10 Mon Sep 17 00:00:00 2001 From: James Smart Date: Fri, 11 Jan 2008 01:53:18 -0500 Subject: [SCSI] lpfc 8.2.4 : Fix Unsolicited Data items Fix Drivers Unsolicited CT command handling - we did not handle multiframe sequences well. Fix error due to delay in replenishing buffers for unsolicited data. Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_ct.c | 92 ++++++++++++++---------------------- drivers/scsi/lpfc/lpfc_hw.h | 29 ++++++++++++ drivers/scsi/lpfc/lpfc_sli.c | 109 ++++++++++++++++++++++--------------------- drivers/scsi/lpfc/lpfc_sli.h | 2 + 4 files changed, 121 insertions(+), 111 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c index 7a8b3b90af71..3759ae1dc5e7 100644 --- a/drivers/scsi/lpfc/lpfc_ct.c +++ b/drivers/scsi/lpfc/lpfc_ct.c @@ -57,45 +57,27 @@ static char *lpfc_release_version = LPFC_DRIVER_VERSION; -/* - * lpfc_ct_unsol_event - */ static void -lpfc_ct_unsol_buffer(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq, - struct lpfc_dmabuf *mp, uint32_t size) +lpfc_ct_ignore_hbq_buffer(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq, + struct lpfc_dmabuf *mp, uint32_t size) { if (!mp) { - printk(KERN_ERR "%s (%d): Unsolited CT, no buffer, " - "piocbq = %p, status = x%x, mp = %p, size = %d\n", - __FUNCTION__, __LINE__, - piocbq, piocbq->iocb.ulpStatus, mp, size); + lpfc_printf_log(phba, KERN_INFO, LOG_ELS, + "0146 Ignoring unsolicted CT No HBQ " + "status = x%x\n", + piocbq->iocb.ulpStatus); } - - printk(KERN_ERR "%s (%d): Ignoring unsolicted CT piocbq = %p, " - "buffer = %p, size = %d, status = x%x\n", - __FUNCTION__, __LINE__, - piocbq, mp, size, - piocbq->iocb.ulpStatus); - + lpfc_printf_log(phba, KERN_INFO, LOG_ELS, + "0145 Ignoring unsolicted CT HBQ Size:%d " + "status = x%x\n", + size, piocbq->iocb.ulpStatus); } static void -lpfc_ct_ignore_hbq_buffer(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq, - struct lpfc_dmabuf *mp, uint32_t size) +lpfc_ct_unsol_buffer(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq, + struct lpfc_dmabuf *mp, uint32_t size) { - if (!mp) { - printk(KERN_ERR "%s (%d): Unsolited CT, no " - "HBQ buffer, piocbq = %p, status = x%x\n", - __FUNCTION__, __LINE__, - piocbq, piocbq->iocb.ulpStatus); - } else { - lpfc_ct_unsol_buffer(phba, piocbq, mp, size); - printk(KERN_ERR "%s (%d): Ignoring unsolicted CT " - "piocbq = %p, buffer = %p, size = %d, " - "status = x%x\n", - __FUNCTION__, __LINE__, - piocbq, mp, size, piocbq->iocb.ulpStatus); - } + lpfc_ct_ignore_hbq_buffer(phba, piocbq, mp, size); } void @@ -109,11 +91,8 @@ lpfc_ct_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, struct lpfc_iocbq *iocbq; dma_addr_t paddr; uint32_t size; - struct lpfc_dmabuf *bdeBuf1 = piocbq->context2; - struct lpfc_dmabuf *bdeBuf2 = piocbq->context3; - - piocbq->context2 = NULL; - piocbq->context3 = NULL; + struct list_head head; + struct lpfc_dmabuf *bdeBuf; if (unlikely(icmd->ulpStatus == IOSTAT_NEED_BUFFER)) { lpfc_sli_hbqbuf_add_hbqs(phba, LPFC_ELS_HBQ); @@ -122,7 +101,7 @@ lpfc_ct_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, /* Not enough posted buffers; Try posting more buffers */ phba->fc_stat.NoRcvBuf++; if (!(phba->sli3_options & LPFC_SLI3_HBQ_ENABLED)) - lpfc_post_buffer(phba, pring, 0, 1); + lpfc_post_buffer(phba, pring, 2, 1); return; } @@ -133,38 +112,34 @@ lpfc_ct_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, return; if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) { - list_for_each_entry(iocbq, &piocbq->list, list) { + INIT_LIST_HEAD(&head); + list_add_tail(&head, &piocbq->list); + list_for_each_entry(iocbq, &head, list) { icmd = &iocbq->iocb; - if (icmd->ulpBdeCount == 0) { - printk(KERN_ERR "%s (%d): Unsolited CT, no " - "BDE, iocbq = %p, status = x%x\n", - __FUNCTION__, __LINE__, - iocbq, iocbq->iocb.ulpStatus); + if (icmd->ulpBdeCount == 0) continue; - } - + bdeBuf = iocbq->context2; + iocbq->context2 = NULL; size = icmd->un.cont64[0].tus.f.bdeSize; - lpfc_ct_ignore_hbq_buffer(phba, piocbq, bdeBuf1, size); - lpfc_in_buf_free(phba, bdeBuf1); + lpfc_ct_unsol_buffer(phba, piocbq, bdeBuf, size); + lpfc_in_buf_free(phba, bdeBuf); if (icmd->ulpBdeCount == 2) { - lpfc_ct_ignore_hbq_buffer(phba, piocbq, bdeBuf2, - size); - lpfc_in_buf_free(phba, bdeBuf2); + bdeBuf = iocbq->context3; + iocbq->context3 = NULL; + size = icmd->unsli3.rcvsli3.bde2.tus.f.bdeSize; + lpfc_ct_unsol_buffer(phba, piocbq, bdeBuf, + size); + lpfc_in_buf_free(phba, bdeBuf); } } + list_del(&head); } else { struct lpfc_iocbq *next; list_for_each_entry_safe(iocbq, next, &piocbq->list, list) { icmd = &iocbq->iocb; - if (icmd->ulpBdeCount == 0) { - printk(KERN_ERR "%s (%d): Unsolited CT, no " - "BDE, iocbq = %p, status = x%x\n", - __FUNCTION__, __LINE__, - iocbq, iocbq->iocb.ulpStatus); - continue; - } - + if (icmd->ulpBdeCount == 0) + lpfc_ct_unsol_buffer(phba, piocbq, NULL, 0); for (i = 0; i < icmd->ulpBdeCount; i++) { paddr = getPaddr(icmd->un.cont64[i].addrHigh, icmd->un.cont64[i].addrLow); @@ -176,6 +151,7 @@ lpfc_ct_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } list_del(&iocbq->list); lpfc_sli_release_iocbq(phba, iocbq); + lpfc_post_buffer(phba, pring, i, 1); } } } diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index f78d23a3b667..041f83e7634a 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -2994,6 +2994,34 @@ typedef struct { #endif } RCV_ELS_REQ64; +/* IOCB Command template for RCV_SEQ64 */ +struct rcv_seq64 { + struct ulp_bde64 elsReq; + uint32_t hbq_1; + uint32_t parmRo; +#ifdef __BIG_ENDIAN_BITFIELD + uint32_t rctl:8; + uint32_t type:8; + uint32_t dfctl:8; + uint32_t ls:1; + uint32_t fs:1; + uint32_t rsvd2:3; + uint32_t si:1; + uint32_t bc:1; + uint32_t rsvd3:1; +#else /* __LITTLE_ENDIAN_BITFIELD */ + uint32_t rsvd3:1; + uint32_t bc:1; + uint32_t si:1; + uint32_t rsvd2:3; + uint32_t fs:1; + uint32_t ls:1; + uint32_t dfctl:8; + uint32_t type:8; + uint32_t rctl:8; +#endif +}; + /* IOCB Command template for all 64 bit FCP Initiator commands */ typedef struct { ULP_BDL bdl; @@ -3085,6 +3113,7 @@ typedef struct _IOCB { /* IOCB structure */ FCPT_FIELDS64 fcpt64; /* FCP 64 bit target template */ ASYNCSTAT_FIELDS asyncstat; /* async_status iocb */ QUE_XRI64_CX_FIELDS quexri64cx; /* que_xri64_cx fields */ + struct rcv_seq64 rcvseq64; /* RCV_SEQ64 and RCV_CONT64 */ uint32_t ulpWord[IOCB_WORD_SZ - 2]; /* generic 6 'words' */ } un; diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 5a2cb484e137..584c5451641f 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -955,6 +955,8 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, match = 0; irsp = &(saveq->iocb); + if (irsp->ulpStatus == IOSTAT_NEED_BUFFER) + return 1; if (irsp->ulpCommand == CMD_ASYNC_STATUS) { if (pring->lpfc_sli_rcv_async_status) pring->lpfc_sli_rcv_async_status(phba, pring, saveq); @@ -970,36 +972,7 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, return 1; } - if ((irsp->ulpCommand == CMD_RCV_ELS_REQ64_CX) - || (irsp->ulpCommand == CMD_RCV_ELS_REQ_CX) - || (irsp->ulpCommand == CMD_IOCB_RCV_ELS64_CX) - || (irsp->ulpCommand == CMD_IOCB_RCV_CONT64_CX)) { - Rctl = FC_ELS_REQ; - Type = FC_ELS_DATA; - } else { - w5p = - (WORD5 *) & (saveq->iocb.un. - ulpWord[5]); - Rctl = w5p->hcsw.Rctl; - Type = w5p->hcsw.Type; - - /* Firmware Workaround */ - if ((Rctl == 0) && (pring->ringno == LPFC_ELS_RING) && - (irsp->ulpCommand == CMD_RCV_SEQUENCE64_CX || - irsp->ulpCommand == CMD_IOCB_RCV_SEQ64_CX)) { - Rctl = FC_ELS_REQ; - Type = FC_ELS_DATA; - w5p->hcsw.Rctl = Rctl; - w5p->hcsw.Type = Type; - } - } - if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) { - struct lpfc_hbq_entry *hbqe_1, *hbqe_2; - hbqe_1 = (struct lpfc_hbq_entry *) &saveq->iocb.un.ulpWord[0]; - hbqe_2 = (struct lpfc_hbq_entry *) &saveq->iocb. - unsli3.sli3Words[4]; - if (irsp->ulpBdeCount != 0) { saveq->context2 = lpfc_sli_get_buff(phba, pring, irsp->un.ulpWord[3]); @@ -1011,7 +984,6 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, "an unsolicited iocb. tag 0x%x\n", pring->ringno, irsp->un.ulpWord[3]); - } if (irsp->ulpBdeCount == 2) { saveq->context3 = lpfc_sli_get_buff(phba, pring, @@ -1026,16 +998,11 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, irsp->unsli3.sli3Words[7]); } list_for_each_entry(iocbq, &saveq->list, list) { - hbqe_1 = (struct lpfc_hbq_entry *) &iocbq->iocb. - un.ulpWord[0]; - hbqe_2 = (struct lpfc_hbq_entry *) &iocbq->iocb. - unsli3.sli3Words[4]; irsp = &(iocbq->iocb); - if (irsp->ulpBdeCount != 0) { iocbq->context2 = lpfc_sli_get_buff(phba, pring, irsp->un.ulpWord[3]); - if (!saveq->context2) + if (!iocbq->context2) lpfc_printf_log(phba, KERN_ERR, LOG_SLI, @@ -1047,7 +1014,7 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, if (irsp->ulpBdeCount == 2) { iocbq->context3 = lpfc_sli_get_buff(phba, pring, irsp->unsli3.sli3Words[7]); - if (!saveq->context3) + if (!iocbq->context3) lpfc_printf_log(phba, KERN_ERR, LOG_SLI, @@ -1059,6 +1026,49 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } } } + if (irsp->ulpBdeCount != 0 && + (irsp->ulpCommand == CMD_IOCB_RCV_CONT64_CX || + irsp->ulpStatus == IOSTAT_INTERMED_RSP)) { + int found = 0; + + /* search continue save q for same XRI */ + list_for_each_entry(iocbq, &pring->iocb_continue_saveq, clist) { + if (iocbq->iocb.ulpContext == saveq->iocb.ulpContext) { + list_add_tail(&saveq->list, &iocbq->list); + found = 1; + break; + } + } + if (!found) + list_add_tail(&saveq->clist, + &pring->iocb_continue_saveq); + if (saveq->iocb.ulpStatus != IOSTAT_INTERMED_RSP) { + list_del_init(&iocbq->clist); + saveq = iocbq; + irsp = &(saveq->iocb); + } else + return 0; + } + if ((irsp->ulpCommand == CMD_RCV_ELS_REQ64_CX) || + (irsp->ulpCommand == CMD_RCV_ELS_REQ_CX) || + (irsp->ulpCommand == CMD_IOCB_RCV_ELS64_CX)) { + Rctl = FC_ELS_REQ; + Type = FC_ELS_DATA; + } else { + w5p = (WORD5 *)&(saveq->iocb.un.ulpWord[5]); + Rctl = w5p->hcsw.Rctl; + Type = w5p->hcsw.Type; + + /* Firmware Workaround */ + if ((Rctl == 0) && (pring->ringno == LPFC_ELS_RING) && + (irsp->ulpCommand == CMD_RCV_SEQUENCE64_CX || + irsp->ulpCommand == CMD_IOCB_RCV_SEQ64_CX)) { + Rctl = FC_ELS_REQ; + Type = FC_ELS_DATA; + w5p->hcsw.Rctl = Rctl; + w5p->hcsw.Type = Type; + } + } /* unSolicited Responses */ if (pring->prt[0].profile) { @@ -1069,12 +1079,9 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, } else { /* We must search, based on rctl / type for the right routine */ - for (i = 0; i < pring->num_mask; - i++) { - if ((pring->prt[i].rctl == - Rctl) - && (pring->prt[i]. - type == Type)) { + for (i = 0; i < pring->num_mask; i++) { + if ((pring->prt[i].rctl == Rctl) + && (pring->prt[i].type == Type)) { if (pring->prt[i].lpfc_sli_rcv_unsol_event) (pring->prt[i].lpfc_sli_rcv_unsol_event) (phba, pring, saveq); @@ -1641,12 +1648,7 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba, writel(pring->rspidx, &phba->host_gp[pring->ringno].rspGetInx); - if (list_empty(&(pring->iocb_continueq))) { - list_add(&rspiocbp->list, &(pring->iocb_continueq)); - } else { - list_add_tail(&rspiocbp->list, - &(pring->iocb_continueq)); - } + list_add_tail(&rspiocbp->list, &(pring->iocb_continueq)); pring->iocb_continueq_cnt++; if (irsp->ulpLe) { @@ -1711,17 +1713,17 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba, iocb_cmd_type = irsp->ulpCommand & CMD_IOCB_MASK; type = lpfc_sli_iocb_cmd_type(iocb_cmd_type); if (type == LPFC_SOL_IOCB) { - spin_unlock_irqrestore(&phba->hbalock, - iflag); + spin_unlock_irqrestore(&phba->hbalock, iflag); rc = lpfc_sli_process_sol_iocb(phba, pring, saveq); spin_lock_irqsave(&phba->hbalock, iflag); } else if (type == LPFC_UNSOL_IOCB) { - spin_unlock_irqrestore(&phba->hbalock, - iflag); + spin_unlock_irqrestore(&phba->hbalock, iflag); rc = lpfc_sli_process_unsol_iocb(phba, pring, saveq); spin_lock_irqsave(&phba->hbalock, iflag); + if (!rc) + free_saveq = 0; } else if (type == LPFC_ABORT_IOCB) { if ((irsp->ulpCommand != CMD_XRI_ABORTED_CX) && ((cmdiocbp = @@ -3238,6 +3240,7 @@ lpfc_sli_queue_setup(struct lpfc_hba *phba) INIT_LIST_HEAD(&pring->txq); INIT_LIST_HEAD(&pring->txcmplq); INIT_LIST_HEAD(&pring->iocb_continueq); + INIT_LIST_HEAD(&pring->iocb_continue_saveq); INIT_LIST_HEAD(&pring->postbufq); } spin_unlock_irq(&phba->hbalock); diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h index 1796473ad65e..7249fd252cbb 100644 --- a/drivers/scsi/lpfc/lpfc_sli.h +++ b/drivers/scsi/lpfc/lpfc_sli.h @@ -33,6 +33,7 @@ typedef enum _lpfc_ctx_cmd { struct lpfc_iocbq { /* lpfc_iocbqs are used in double linked lists */ struct list_head list; + struct list_head clist; uint16_t iotag; /* pre-assigned IO tag */ uint16_t rsvd1; @@ -160,6 +161,7 @@ struct lpfc_sli_ring { struct list_head iocb_continueq; uint16_t iocb_continueq_cnt; /* current length of queue */ uint16_t iocb_continueq_max; /* max length */ + struct list_head iocb_continue_saveq; struct lpfc_sli_ring_mask prt[LPFC_MAX_RING_MASK]; uint32_t num_mask; /* number of mask entries in prt array */ -- cgit v1.2.3-59-g8ed1b From c95d6c6c2b0a303a113fd468efce7430d5b20eac Mon Sep 17 00:00:00 2001 From: James Smart Date: Fri, 11 Jan 2008 01:53:23 -0500 Subject: [SCSI] lpfc 8.2.4 : Enhance debugfs use Enhance debugfs to dump HBA SLIM as well as Host SLIM Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 3 +- drivers/scsi/lpfc/lpfc_debugfs.c | 144 ++++++++++++++++++++++++++++++++------- 2 files changed, 122 insertions(+), 25 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 80719bb3511e..f26b9538affe 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -578,7 +578,8 @@ struct lpfc_hba { struct dentry *hba_debugfs_root; atomic_t debugfs_vport_count; struct dentry *debug_hbqinfo; - struct dentry *debug_dumpslim; + struct dentry *debug_dumpHostSlim; + struct dentry *debug_dumpHBASlim; struct dentry *debug_slow_ring_trc; struct lpfc_debugfs_trc *slow_ring_trc; atomic_t slow_ring_trc_cnt; diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index da607c775cfc..783d1eea13ef 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -43,6 +43,7 @@ #include "lpfc_crtn.h" #include "lpfc_vport.h" #include "lpfc_version.h" +#include "lpfc_compat.h" #include "lpfc_debugfs.h" #ifdef CONFIG_LPFC_DEBUG_FS @@ -75,18 +76,18 @@ module_param(lpfc_debugfs_enable, int, 0); MODULE_PARM_DESC(lpfc_debugfs_enable, "Enable debugfs services"); /* This MUST be a power of 2 */ -static int lpfc_debugfs_max_disc_trc = 0; +static int lpfc_debugfs_max_disc_trc; module_param(lpfc_debugfs_max_disc_trc, int, 0); MODULE_PARM_DESC(lpfc_debugfs_max_disc_trc, "Set debugfs discovery trace depth"); /* This MUST be a power of 2 */ -static int lpfc_debugfs_max_slow_ring_trc = 0; +static int lpfc_debugfs_max_slow_ring_trc; module_param(lpfc_debugfs_max_slow_ring_trc, int, 0); MODULE_PARM_DESC(lpfc_debugfs_max_slow_ring_trc, "Set debugfs slow ring trace depth"); -static int lpfc_debugfs_mask_disc_trc = 0; +int lpfc_debugfs_mask_disc_trc; module_param(lpfc_debugfs_mask_disc_trc, int, 0); MODULE_PARM_DESC(lpfc_debugfs_mask_disc_trc, "Set debugfs discovery trace mask"); @@ -100,8 +101,11 @@ MODULE_PARM_DESC(lpfc_debugfs_mask_disc_trc, #define LPFC_NODELIST_SIZE 8192 #define LPFC_NODELIST_ENTRY_SIZE 120 -/* dumpslim output buffer size */ -#define LPFC_DUMPSLIM_SIZE 4096 +/* dumpHBASlim output buffer size */ +#define LPFC_DUMPHBASLIM_SIZE 4096 + +/* dumpHostSlim output buffer size */ +#define LPFC_DUMPHOSTSLIM_SIZE 4096 /* hbqinfo output buffer size */ #define LPFC_HBQINFO_SIZE 8192 @@ -298,18 +302,58 @@ skipit: return len; } +static int lpfc_debugfs_last_hba_slim_off; + +static int +lpfc_debugfs_dumpHBASlim_data(struct lpfc_hba *phba, char *buf, int size) +{ + int len = 0; + int i, off; + uint32_t *ptr; + char buffer[1024]; + + off = 0; + spin_lock_irq(&phba->hbalock); + + len += snprintf(buf+len, size-len, "HBA SLIM\n"); + lpfc_memcpy_from_slim(buffer, + ((uint8_t *)phba->MBslimaddr) + lpfc_debugfs_last_hba_slim_off, + 1024); + + ptr = (uint32_t *)&buffer[0]; + off = lpfc_debugfs_last_hba_slim_off; + + /* Set it up for the next time */ + lpfc_debugfs_last_hba_slim_off += 1024; + if (lpfc_debugfs_last_hba_slim_off >= 4096) + lpfc_debugfs_last_hba_slim_off = 0; + + i = 1024; + while (i > 0) { + len += snprintf(buf+len, size-len, + "%08x: %08x %08x %08x %08x %08x %08x %08x %08x\n", + off, *ptr, *(ptr+1), *(ptr+2), *(ptr+3), *(ptr+4), + *(ptr+5), *(ptr+6), *(ptr+7)); + ptr += 8; + i -= (8 * sizeof(uint32_t)); + off += (8 * sizeof(uint32_t)); + } + + spin_unlock_irq(&phba->hbalock); + return len; +} + static int -lpfc_debugfs_dumpslim_data(struct lpfc_hba *phba, char *buf, int size) +lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size) { int len = 0; - int cnt, i, off; + int i, off; uint32_t word0, word1, word2, word3; uint32_t *ptr; struct lpfc_pgp *pgpp; struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; - cnt = LPFC_DUMPSLIM_SIZE; off = 0; spin_lock_irq(&phba->hbalock); @@ -621,7 +665,7 @@ out: } static int -lpfc_debugfs_dumpslim_open(struct inode *inode, struct file *file) +lpfc_debugfs_dumpHBASlim_open(struct inode *inode, struct file *file) { struct lpfc_hba *phba = inode->i_private; struct lpfc_debug *debug; @@ -632,14 +676,41 @@ lpfc_debugfs_dumpslim_open(struct inode *inode, struct file *file) goto out; /* Round to page boundry */ - debug->buffer = kmalloc(LPFC_DUMPSLIM_SIZE, GFP_KERNEL); + debug->buffer = kmalloc(LPFC_DUMPHBASLIM_SIZE, GFP_KERNEL); if (!debug->buffer) { kfree(debug); goto out; } - debug->len = lpfc_debugfs_dumpslim_data(phba, debug->buffer, - LPFC_DUMPSLIM_SIZE); + debug->len = lpfc_debugfs_dumpHBASlim_data(phba, debug->buffer, + LPFC_DUMPHBASLIM_SIZE); + file->private_data = debug; + + rc = 0; +out: + return rc; +} + +static int +lpfc_debugfs_dumpHostSlim_open(struct inode *inode, struct file *file) +{ + struct lpfc_hba *phba = inode->i_private; + struct lpfc_debug *debug; + int rc = -ENOMEM; + + debug = kmalloc(sizeof(*debug), GFP_KERNEL); + if (!debug) + goto out; + + /* Round to page boundry */ + debug->buffer = kmalloc(LPFC_DUMPHOSTSLIM_SIZE, GFP_KERNEL); + if (!debug->buffer) { + kfree(debug); + goto out; + } + + debug->len = lpfc_debugfs_dumpHostSlim_data(phba, debug->buffer, + LPFC_DUMPHOSTSLIM_SIZE); file->private_data = debug; rc = 0; @@ -742,10 +813,19 @@ static struct file_operations lpfc_debugfs_op_hbqinfo = { .release = lpfc_debugfs_release, }; -#undef lpfc_debugfs_op_dumpslim -static struct file_operations lpfc_debugfs_op_dumpslim = { +#undef lpfc_debugfs_op_dumpHBASlim +static struct file_operations lpfc_debugfs_op_dumpHBASlim = { + .owner = THIS_MODULE, + .open = lpfc_debugfs_dumpHBASlim_open, + .llseek = lpfc_debugfs_lseek, + .read = lpfc_debugfs_read, + .release = lpfc_debugfs_release, +}; + +#undef lpfc_debugfs_op_dumpHostSlim +static struct file_operations lpfc_debugfs_op_dumpHostSlim = { .owner = THIS_MODULE, - .open = lpfc_debugfs_dumpslim_open, + .open = lpfc_debugfs_dumpHostSlim_open, .llseek = lpfc_debugfs_lseek, .read = lpfc_debugfs_read, .release = lpfc_debugfs_release, @@ -813,15 +893,27 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) goto debug_failed; } - /* Setup dumpslim */ - snprintf(name, sizeof(name), "dumpslim"); - phba->debug_dumpslim = + /* Setup dumpHBASlim */ + snprintf(name, sizeof(name), "dumpHBASlim"); + phba->debug_dumpHBASlim = debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, phba->hba_debugfs_root, - phba, &lpfc_debugfs_op_dumpslim); - if (!phba->debug_dumpslim) { + phba, &lpfc_debugfs_op_dumpHBASlim); + if (!phba->debug_dumpHBASlim) { lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0409 Cannot create debugfs dumpslim\n"); + "0409 Cannot create debugfs dumpHBASlim\n"); + goto debug_failed; + } + + /* Setup dumpHostSlim */ + snprintf(name, sizeof(name), "dumpHostSlim"); + phba->debug_dumpHostSlim = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + phba->hba_debugfs_root, + phba, &lpfc_debugfs_op_dumpHostSlim); + if (!phba->debug_dumpHostSlim) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0409 Cannot create debugfs dumpHostSlim\n"); goto debug_failed; } @@ -971,9 +1063,13 @@ lpfc_debugfs_terminate(struct lpfc_vport *vport) debugfs_remove(phba->debug_hbqinfo); /* hbqinfo */ phba->debug_hbqinfo = NULL; } - if (phba->debug_dumpslim) { - debugfs_remove(phba->debug_dumpslim); /* dumpslim */ - phba->debug_dumpslim = NULL; + if (phba->debug_dumpHBASlim) { + debugfs_remove(phba->debug_dumpHBASlim); /* HBASlim */ + phba->debug_dumpHBASlim = NULL; + } + if (phba->debug_dumpHostSlim) { + debugfs_remove(phba->debug_dumpHostSlim); /* HostSlim */ + phba->debug_dumpHostSlim = NULL; } if (phba->slow_ring_trc) { kfree(phba->slow_ring_trc); -- cgit v1.2.3-59-g8ed1b From fa4066b672821d24cb7180b8d0434b01a7043172 Mon Sep 17 00:00:00 2001 From: James Smart Date: Fri, 11 Jan 2008 01:53:27 -0500 Subject: [SCSI] lpfc 8.2.4 : Rework misplaced reference taking on node structure Rework misplaced reference taking on node structure Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_ct.c | 1 - drivers/scsi/lpfc/lpfc_els.c | 172 ++++++++++++++++++++++++++----------- drivers/scsi/lpfc/lpfc_hbadisc.c | 37 ++++++-- drivers/scsi/lpfc/lpfc_nportdisc.c | 3 + drivers/scsi/lpfc/lpfc_sli.c | 2 +- 5 files changed, 157 insertions(+), 58 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c index 3759ae1dc5e7..92441ce610ed 100644 --- a/drivers/scsi/lpfc/lpfc_ct.c +++ b/drivers/scsi/lpfc/lpfc_ct.c @@ -561,7 +561,6 @@ lpfc_cmpl_ct_cmd_gid_ft(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, if (vport->load_flag & FC_UNLOADING) goto out; - if (lpfc_els_chk_latt(vport) || lpfc_error_lost_link(irsp)) { lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, "0216 Link event during NS query\n"); diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 8da6e8be9d83..c6b739dc6bc3 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -120,12 +120,8 @@ lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp, pcmd = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); if (pcmd) pcmd->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &pcmd->phys); - if (!pcmd || !pcmd->virt) { - kfree(pcmd); - - lpfc_sli_release_iocbq(phba, elsiocb); - return NULL; - } + if (!pcmd || !pcmd->virt) + goto els_iocb_free_pcmb_exit; INIT_LIST_HEAD(&pcmd->list); @@ -135,13 +131,8 @@ lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp, if (prsp) prsp->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &prsp->phys); - if (!prsp || !prsp->virt) { - kfree(prsp); - lpfc_mbuf_free(phba, pcmd->virt, pcmd->phys); - kfree(pcmd); - lpfc_sli_release_iocbq(phba, elsiocb); - return NULL; - } + if (!prsp || !prsp->virt) + goto els_iocb_free_prsp_exit; INIT_LIST_HEAD(&prsp->list); } else { prsp = NULL; @@ -152,15 +143,8 @@ lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp, if (pbuflist) pbuflist->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &pbuflist->phys); - if (!pbuflist || !pbuflist->virt) { - lpfc_sli_release_iocbq(phba, elsiocb); - lpfc_mbuf_free(phba, pcmd->virt, pcmd->phys); - lpfc_mbuf_free(phba, prsp->virt, prsp->phys); - kfree(pcmd); - kfree(prsp); - kfree(pbuflist); - return NULL; - } + if (!pbuflist || !pbuflist->virt) + goto els_iocb_free_pbuf_exit; INIT_LIST_HEAD(&pbuflist->list); @@ -205,7 +189,10 @@ lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp, bpl->tus.w = le32_to_cpu(bpl->tus.w); } + /* prevent preparing iocb with NULL ndlp reference */ elsiocb->context1 = lpfc_nlp_get(ndlp); + if (!elsiocb->context1) + goto els_iocb_free_pbuf_exit; elsiocb->context2 = pcmd; elsiocb->context3 = pbuflist; elsiocb->retry = retry; @@ -231,8 +218,20 @@ lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp, cmdSize); } return elsiocb; -} +els_iocb_free_pbuf_exit: + lpfc_mbuf_free(phba, prsp->virt, prsp->phys); + kfree(pbuflist); + +els_iocb_free_prsp_exit: + lpfc_mbuf_free(phba, pcmd->virt, pcmd->phys); + kfree(prsp); + +els_iocb_free_pcmb_exit: + kfree(pcmd); + lpfc_sli_release_iocbq(phba, elsiocb); + return NULL; +} static int lpfc_issue_fabric_reglogin(struct lpfc_vport *vport) @@ -513,6 +512,9 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, /* Check to see if link went down during discovery */ if (lpfc_els_chk_latt(vport)) { + /* One additional decrement on node reference count to + * trigger the release of the node + */ lpfc_nlp_put(ndlp); goto out; } @@ -731,6 +733,9 @@ lpfc_initial_flogi(struct lpfc_vport *vport) } if (lpfc_issue_els_flogi(vport, ndlp, 0)) { + /* This decrement of reference count to node shall kick off + * the release of the node. + */ lpfc_nlp_put(ndlp); } return 1; @@ -754,7 +759,11 @@ lpfc_initial_fdisc(struct lpfc_vport *vport) lpfc_dequeue_node(vport, ndlp); } if (lpfc_issue_els_fdisc(vport, ndlp, 0)) { + /* decrement node reference count to trigger the release of + * the node. + */ lpfc_nlp_put(ndlp); + return 0; } return 1; } @@ -1557,6 +1566,9 @@ lpfc_issue_els_scr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry) ndlp->nlp_DID, ELS_CMD_SCR); if (!elsiocb) { + /* This will trigger the release of the node just + * allocated + */ lpfc_nlp_put(ndlp); return 1; } @@ -1578,10 +1590,17 @@ lpfc_issue_els_scr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry) phba->fc_stat.elsXmitSCR++; elsiocb->iocb_cmpl = lpfc_cmpl_els_cmd; if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) { + /* The additional lpfc_nlp_put will cause the following + * lpfc_els_free_iocb routine to trigger the rlease of + * the node. + */ lpfc_nlp_put(ndlp); lpfc_els_free_iocb(phba, elsiocb); return 1; } + /* This will cause the callback-function lpfc_cmpl_els_cmd to + * trigger the release of node. + */ lpfc_nlp_put(ndlp); return 0; } @@ -1613,6 +1632,9 @@ lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry) elsiocb = lpfc_prep_els_iocb(vport, 1, cmdsize, retry, ndlp, ndlp->nlp_DID, ELS_CMD_RNID); if (!elsiocb) { + /* This will trigger the release of the node just + * allocated + */ lpfc_nlp_put(ndlp); return 1; } @@ -1649,10 +1671,17 @@ lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry) phba->fc_stat.elsXmitFARPR++; elsiocb->iocb_cmpl = lpfc_cmpl_els_cmd; if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) { + /* The additional lpfc_nlp_put will cause the following + * lpfc_els_free_iocb routine to trigger the release of + * the node. + */ lpfc_nlp_put(ndlp); lpfc_els_free_iocb(phba, elsiocb); return 1; } + /* This will cause the callback-function lpfc_cmpl_els_cmd to + * trigger the release of the node. + */ lpfc_nlp_put(ndlp); return 0; } @@ -1712,7 +1741,10 @@ lpfc_els_retry_delay(unsigned long ptr) return; } - evtp->evt_arg1 = ndlp; + /* We need to hold the node by incrementing the reference + * count until the queued work is done + */ + evtp->evt_arg1 = lpfc_nlp_get(ndlp); evtp->evt = LPFC_EVT_ELS_RETRY; list_add_tail(&evtp->evt_listp, &phba->work_list); if (phba->work_wait) @@ -2190,6 +2222,11 @@ lpfc_cmpl_els_logo_acc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, * thread, just unregister the RPI. */ lpfc_unreg_rpi(vport, ndlp); + } else { + /* Indicate the node has already released, should + * not reference to it from within lpfc_els_free_iocb. + */ + cmdiocb->context1 = NULL; } } lpfc_els_free_iocb(phba, cmdiocb); @@ -2208,7 +2245,6 @@ lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) mempool_free(pmb, phba->mbox_mem_pool); if (ndlp) { lpfc_nlp_put(ndlp); - /* This is the end of the default RPI cleanup logic for this * ndlp. If no other discovery threads are using this ndlp. * we should free all resources associated with it. @@ -2236,11 +2272,13 @@ lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, if (cmdiocb->context_un.mbox) mbox = cmdiocb->context_un.mbox; - /* First determine if this is a LS_RJT cmpl */ + /* First determine if this is a LS_RJT cmpl. Note, this callback + * function can have cmdiocb->contest1 (ndlp) field set to NULL. + */ pcmd = (uint8_t *) (((struct lpfc_dmabuf *) cmdiocb->context2)->virt); - if (*((uint32_t *) (pcmd)) == ELS_CMD_LS_RJT) { - /* A LS_RJT associated with Default RPI cleanup - * has its own seperate code path. + if (ndlp && (*((uint32_t *) (pcmd)) == ELS_CMD_LS_RJT)) { + /* A LS_RJT associated with Default RPI cleanup has its own + * seperate code path. */ if (!(ndlp->nlp_flag & NLP_RM_DFLT_RPI)) ls_rjt = 1; @@ -2257,8 +2295,14 @@ lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, mempool_free(mbox, phba->mbox_mem_pool); } if (ndlp && (ndlp->nlp_flag & NLP_RM_DFLT_RPI)) - if (lpfc_nlp_not_used(ndlp)) + if (lpfc_nlp_not_used(ndlp)) { ndlp = NULL; + /* Indicate the node has already released, + * should not reference to it from within + * the routine lpfc_els_free_iocb. + */ + cmdiocb->context1 = NULL; + } goto out; } @@ -2302,14 +2346,27 @@ lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_state, ndlp->nlp_rpi); - if (lpfc_nlp_not_used(ndlp)) + if (lpfc_nlp_not_used(ndlp)) { ndlp = NULL; + /* Indicate node has already been released, + * should not reference to it from within + * the routine lpfc_els_free_iocb. + */ + cmdiocb->context1 = NULL; + } } else { /* Do not drop node for lpfc_els_abort'ed ELS cmds */ if (!lpfc_error_lost_link(irsp) && ndlp->nlp_flag & NLP_ACC_REGLOGIN) { - if (lpfc_nlp_not_used(ndlp)) + if (lpfc_nlp_not_used(ndlp)) { ndlp = NULL; + /* Indicate node has already been + * released, should not reference + * to it from within the routine + * lpfc_els_free_iocb. + */ + cmdiocb->context1 = NULL; + } } } mp = (struct lpfc_dmabuf *) mbox->context1; @@ -2331,7 +2388,12 @@ out: * resources. */ if (ls_rjt) - lpfc_nlp_not_used(ndlp); + if (lpfc_nlp_not_used(ndlp)) + /* Indicate node has already been released, + * should not reference to it from within + * the routine lpfc_els_free_iocb. + */ + cmdiocb->context1 = NULL; } lpfc_els_free_iocb(phba, cmdiocb); @@ -3292,7 +3354,10 @@ lpfc_els_rsp_rps_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) elsiocb = lpfc_prep_els_iocb(phba->pport, 0, cmdsize, lpfc_max_els_tries, ndlp, ndlp->nlp_DID, ELS_CMD_ACC); + + /* Decrement the ndlp reference count from previous mbox command */ lpfc_nlp_put(ndlp); + if (!elsiocb) return; @@ -3375,11 +3440,13 @@ lpfc_els_rcv_rps(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb, mbox->context2 = lpfc_nlp_get(ndlp); mbox->vport = vport; mbox->mbox_cmpl = lpfc_els_rsp_rps_acc; - if (lpfc_sli_issue_mbox (phba, mbox, MBX_NOWAIT) + if (lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT) != MBX_NOT_FINISHED) /* Mbox completion will send ELS Response */ return 0; - + /* Decrement reference count used for the failed mbox + * command. + */ lpfc_nlp_put(ndlp); mempool_free(mbox, phba->mbox_mem_pool); } @@ -4284,7 +4351,6 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) spin_lock_irq(shost->host_lock); vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI; spin_unlock_irq(shost->host_lock); - lpfc_nlp_put(ndlp); if (mb->mbxStatus) { lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX, @@ -4317,6 +4383,12 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) else lpfc_do_scr_ns_plogi(phba, vport); } + + /* Now, we decrement the ndlp reference count held for this + * callback function + */ + lpfc_nlp_put(ndlp); + mempool_free(pmb, phba->mbox_mem_pool); return; } @@ -4336,26 +4408,29 @@ lpfc_register_new_vport(struct lpfc_hba *phba, struct lpfc_vport *vport, mbox->mbox_cmpl = lpfc_cmpl_reg_new_vport; if (lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT) == MBX_NOT_FINISHED) { + /* mailbox command not success, decrement ndlp + * reference count for this command + */ + lpfc_nlp_put(ndlp); mempool_free(mbox, phba->mbox_mem_pool); - spin_lock_irq(shost->host_lock); - vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI; - spin_unlock_irq(shost->host_lock); - lpfc_vport_set_state(vport, FC_VPORT_FAILED); lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX, "0253 Register VPI: Can't send mbox\n"); + goto mbox_err_exit; } } else { - lpfc_vport_set_state(vport, FC_VPORT_FAILED); - lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX, "0254 Register VPI: no memory\n"); - - spin_lock_irq(shost->host_lock); - vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI; - spin_unlock_irq(shost->host_lock); - lpfc_nlp_put(ndlp); + goto mbox_err_exit; } + return; + +mbox_err_exit: + lpfc_vport_set_state(vport, FC_VPORT_FAILED); + spin_lock_irq(shost->host_lock); + vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI; + spin_unlock_irq(shost->host_lock); + return; } static void @@ -4436,7 +4511,8 @@ lpfc_cmpl_els_fdisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, else lpfc_do_scr_ns_plogi(phba, vport); - lpfc_nlp_put(ndlp); /* Free Fabric ndlp for vports */ + /* Unconditionaly kick off releasing fabric node for vports */ + lpfc_nlp_put(ndlp); } out: diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 644d96012d56..dc042bd97baa 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -149,7 +149,10 @@ lpfc_dev_loss_tmo_callbk(struct fc_rport *rport) return; spin_lock_irq(&phba->hbalock); - evtp->evt_arg1 = ndlp; + /* We need to hold the node by incrementing the reference + * count until this queued work is done + */ + evtp->evt_arg1 = lpfc_nlp_get(ndlp); evtp->evt = LPFC_EVT_DEV_LOSS; list_add_tail(&evtp->evt_listp, &phba->work_list); if (phba->work_wait) @@ -300,12 +303,18 @@ lpfc_work_list_done(struct lpfc_hba *phba) ndlp = (struct lpfc_nodelist *) (evtp->evt_arg1); lpfc_els_retry_delay_handler(ndlp); free_evt = 0; /* evt is part of ndlp */ + /* decrement the node reference count held + * for this queued work + */ + lpfc_nlp_put(ndlp); break; case LPFC_EVT_DEV_LOSS: ndlp = (struct lpfc_nodelist *)(evtp->evt_arg1); - lpfc_nlp_get(ndlp); lpfc_dev_loss_tmo_handler(ndlp); free_evt = 0; + /* decrement the node reference count held for + * this queued work + */ lpfc_nlp_put(ndlp); break; case LPFC_EVT_ONLINE: @@ -1176,6 +1185,9 @@ lpfc_mbx_cmpl_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) lpfc_mbuf_free(phba, mp->virt, mp->phys); kfree(mp); mempool_free(pmb, phba->mbox_mem_pool); + /* decrement the node reference count held for this callback + * function. + */ lpfc_nlp_put(ndlp); return; @@ -1363,6 +1375,9 @@ lpfc_mbx_cmpl_ns_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) if (mb->mbxStatus) { out: + /* decrement the node reference count held for this + * callback function. + */ lpfc_nlp_put(ndlp); lpfc_mbuf_free(phba, mp->virt, mp->phys); kfree(mp); @@ -1414,6 +1429,9 @@ out: goto out; } + /* decrement the node reference count held for this + * callback function. + */ lpfc_nlp_put(ndlp); lpfc_mbuf_free(phba, mp->virt, mp->phys); kfree(mp); @@ -1661,13 +1679,14 @@ void lpfc_drop_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) { /* - * Use of lpfc_drop_node and UNUSED list. lpfc_drop_node should + * Use of lpfc_drop_node and UNUSED list: lpfc_drop_node should * be used if we wish to issue the "last" lpfc_nlp_put() to remove - * the ndlp from the vport. The ndlp resides on the UNUSED list - * until ALL other outstanding threads have completed. Thus, if a - * ndlp is on the UNUSED list already, we should never do another - * lpfc_drop_node() on it. + * the ndlp from the vport. The ndlp marked as UNUSED on the list + * until ALL other outstanding threads have completed. We check + * that the ndlp not already in the UNUSED state before we proceed. */ + if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) + return; lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNUSED_NODE); lpfc_nlp_put(ndlp); return; @@ -2767,7 +2786,9 @@ lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) else mod_timer(&vport->fc_fdmitmo, jiffies + HZ * 60); - /* Mailbox took a reference to the node */ + /* decrement the node reference count held for this callback + * function. + */ lpfc_nlp_put(ndlp); lpfc_mbuf_free(phba, mp->virt, mp->phys); kfree(mp); diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index 783659aa2102..4a0e3406e37a 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -922,6 +922,9 @@ lpfc_cmpl_plogi_plogi_issue(struct lpfc_vport *vport, NLP_STE_REG_LOGIN_ISSUE); return ndlp->nlp_state; } + /* decrement node reference count to the failed mbox + * command + */ lpfc_nlp_put(ndlp); mp = (struct lpfc_dmabuf *) mbox->context1; lpfc_mbuf_free(phba, mp->virt, mp->phys); diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 584c5451641f..fdd01e384e36 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -2605,7 +2605,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag) "1806 Mbox x%x failed. No vport\n", pmbox->mb.mbxCommand); dump_stack(); - return MBXERR_ERROR; + return MBX_NOT_FINISHED; } } -- cgit v1.2.3-59-g8ed1b From 32cfe344b002b4d6fe6852a006a9ef3c9ccdb545 Mon Sep 17 00:00:00 2001 From: James Smart Date: Fri, 11 Jan 2008 01:53:33 -0500 Subject: [SCSI] lpfc 8.2.4 : Update lpfc driver version to 8.2.4 Update lpfc driver version to 8.2.4 Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_version.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h index 487f780a4bc3..4b633d39a82a 100644 --- a/drivers/scsi/lpfc/lpfc_version.h +++ b/drivers/scsi/lpfc/lpfc_version.h @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2007 Emulex. All rights reserved. * + * Copyright (C) 2004-2008 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * @@ -18,10 +18,10 @@ * included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "8.2.3" +#define LPFC_DRIVER_VERSION "8.2.4" #define LPFC_DRIVER_NAME "lpfc" #define LPFC_MODULE_DESC "Emulex LightPulse Fibre Channel SCSI driver " \ LPFC_DRIVER_VERSION -#define LPFC_COPYRIGHT "Copyright(c) 2004-2007 Emulex. All rights reserved." +#define LPFC_COPYRIGHT "Copyright(c) 2004-2008 Emulex. All rights reserved." -- cgit v1.2.3-59-g8ed1b From 984621b4379cccbd0330e10622021a3cfe464ad5 Mon Sep 17 00:00:00 2001 From: "Prakash, Sathya" Date: Fri, 11 Jan 2008 14:42:17 +0530 Subject: [SCSI] mpt fusion: Fix for module unload problem in flash less controller environment This patch fixes the module unload problem in flash less 1030 controller environment where firmware download boot functionality is invoked. The problem is due to the firmware download is being done in the reverse order, which this patch solves by insureing the download occurs to the last controller being reset. signed-off-by: Sathya Prakash Signed-off-by: James Bottomley --- drivers/message/fusion/mptbase.c | 94 ++++++++++++++++++++++------------------ drivers/message/fusion/mptbase.h | 2 +- 2 files changed, 53 insertions(+), 43 deletions(-) diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index 52fb216dfe74..425f60c21fdd 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -2056,7 +2056,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_upload: alt_%s has cached_fw=%p \n", ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw)); - ioc->alt_ioc->cached_fw = NULL; + ioc->cached_fw = NULL; } } else { printk(MYIOC_s_WARN_FMT @@ -2262,10 +2262,12 @@ mpt_adapter_disable(MPT_ADAPTER *ioc) int ret; if (ioc->cached_fw != NULL) { - ddlprintk(ioc, printk(MYIOC_s_INFO_FMT - "mpt_adapter_disable: Pushing FW onto adapter\n", ioc->name)); - if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)ioc->cached_fw, NO_SLEEP)) < 0) { - printk(MYIOC_s_WARN_FMT "firmware downloadboot failure (%d)!\n", + ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: Pushing FW onto " + "adapter\n", __FUNCTION__, ioc->name)); + if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *) + ioc->cached_fw, CAN_SLEEP)) < 0) { + printk(MYIOC_s_WARN_FMT + ": firmware downloadboot failure (%d)!\n", ioc->name, ret); } } @@ -2303,13 +2305,7 @@ mpt_adapter_disable(MPT_ADAPTER *ioc) ioc->alloc_total -= sz; } - if (ioc->cached_fw != NULL) { - sz = ioc->facts.FWImageSize; - pci_free_consistent(ioc->pcidev, sz, - ioc->cached_fw, ioc->cached_fw_dma); - ioc->cached_fw = NULL; - ioc->alloc_total -= sz; - } + mpt_free_fw_memory(ioc); kfree(ioc->spi_data.nvram); mpt_inactive_raid_list_free(ioc); @@ -3047,44 +3043,62 @@ SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag) * * If memory has already been allocated, the same (cached) value * is returned. - */ -void + * + * Return 0 if successfull, or non-zero for failure + **/ +int mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size) { - if (ioc->cached_fw) - return; /* use already allocated memory */ - if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) { + int rc; + + if (ioc->cached_fw) { + rc = 0; /* use already allocated memory */ + goto out; + } + else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) { ioc->cached_fw = ioc->alt_ioc->cached_fw; /* use alt_ioc's memory */ ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma; - ioc->alloc_total += size; - ioc->alt_ioc->alloc_total -= size; + rc = 0; + goto out; + } + ioc->cached_fw = pci_alloc_consistent(ioc->pcidev, size, &ioc->cached_fw_dma); + if (!ioc->cached_fw) { + printk(MYIOC_s_ERR_FMT "Unable to allocate memory for the cached firmware image!\n", + ioc->name); + rc = -1; } else { - if ( (ioc->cached_fw = pci_alloc_consistent(ioc->pcidev, size, &ioc->cached_fw_dma) ) ) - ioc->alloc_total += size; + dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Image @ %p[%p], sz=%d[%x] bytes\n", + ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, size, size)); + ioc->alloc_total += size; + rc = 0; } + out: + return rc; } + /** * mpt_free_fw_memory - free firmware memory * @ioc: Pointer to MPT_ADAPTER structure * * If alt_img is NULL, delete from ioc structure. * Else, delete a secondary image in same format. - */ + **/ void mpt_free_fw_memory(MPT_ADAPTER *ioc) { int sz; + if (!ioc->cached_fw) + return; + sz = ioc->facts.FWImageSize; - dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n", - ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz)); + dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n", + ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz)); pci_free_consistent(ioc->pcidev, sz, ioc->cached_fw, ioc->cached_fw_dma); + ioc->alloc_total -= sz; ioc->cached_fw = NULL; - - return; } - /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** * mpt_do_upload - Construct and Send FWUpload request to MPT adapter port. @@ -3116,17 +3130,12 @@ mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag) if ((sz = ioc->facts.FWImageSize) == 0) return 0; - mpt_alloc_fw_memory(ioc, sz); + if (mpt_alloc_fw_memory(ioc, ioc->facts.FWImageSize) != 0) + return -ENOMEM; dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Image @ %p[%p], sz=%d[%x] bytes\n", ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz)); - if (ioc->cached_fw == NULL) { - /* Major Failure. - */ - return -ENOMEM; - } - prequest = (sleepFlag == NO_SLEEP) ? kzalloc(ioc->req_sz, GFP_ATOMIC) : kzalloc(ioc->req_sz, GFP_KERNEL); if (!prequest) { @@ -3498,12 +3507,12 @@ KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag) static int mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag) { - MPT_ADAPTER *iocp=NULL; u32 diag0val; u32 doorbell; int hard_reset_done = 0; int count = 0; u32 diag1val = 0; + MpiFwHeader_t *cached_fw; /* Pointer to FW */ /* Clear any existing interrupts */ CHIPREG_WRITE32(&ioc->chip->IntStatus, 0); @@ -3635,22 +3644,24 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag) } if (ioc->cached_fw) - iocp = ioc; + cached_fw = (MpiFwHeader_t *)ioc->cached_fw; else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) - iocp = ioc->alt_ioc; - if (iocp) { + cached_fw = (MpiFwHeader_t *)ioc->alt_ioc->cached_fw; + else + cached_fw = NULL; + if (cached_fw) { /* If the DownloadBoot operation fails, the * IOC will be left unusable. This is a fatal error * case. _diag_reset will return < 0 */ for (count = 0; count < 30; count ++) { - diag0val = CHIPREG_READ32(&iocp->chip->Diagnostic); + diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic); if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) { break; } dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "cached_fw: diag0val=%x count=%d\n", - iocp->name, diag0val, count)); + ioc->name, diag0val, count)); /* wait 1 sec */ if (sleepFlag == CAN_SLEEP) { msleep (1000); @@ -3658,8 +3669,7 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag) mdelay (1000); } } - if ((count = mpt_downloadboot(ioc, - (MpiFwHeader_t *)iocp->cached_fw, sleepFlag)) < 0) { + if ((count = mpt_downloadboot(ioc, cached_fw, sleepFlag)) < 0) { printk(MYIOC_s_WARN_FMT "firmware downloadboot failure (%d)!\n", ioc->name, count); } diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h index d7682e083f59..b49b706c0020 100644 --- a/drivers/message/fusion/mptbase.h +++ b/drivers/message/fusion/mptbase.h @@ -907,7 +907,7 @@ extern u32 mpt_GetIocState(MPT_ADAPTER *ioc, int cooked); extern void mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buf, int *size, int len, int showlan); extern int mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag); extern int mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *cfg); -extern void mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size); +extern int mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size); extern void mpt_free_fw_memory(MPT_ADAPTER *ioc); extern int mpt_findImVolumes(MPT_ADAPTER *ioc); extern int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode); -- cgit v1.2.3-59-g8ed1b From 3a0086a80ab7c2f1adb0e9b2a6fc82632979cec5 Mon Sep 17 00:00:00 2001 From: "Salyzyn, Mark" Date: Fri, 11 Jan 2008 11:46:44 -0800 Subject: [SCSI] aacraid: add call to flush_kernel_dcache_page Some architectures require a call to flush_kernel_dcache_page for processor spoofed DMA operations. Signed-off-by: Mark Salyzyn Signed-off-by: James Bottomley --- drivers/scsi/aacraid/aachba.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index 3cddcc0901b2..970a8d99107a 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -31,9 +31,9 @@ #include #include #include -#include #include #include +#include /* For flush_kernel_dcache_page */ #include #include @@ -366,6 +366,7 @@ static void aac_internal_transfer(struct scsi_cmnd *scsicmd, void *data, unsigne if (buf && transfer_len > 0) memcpy(buf + offset, data, transfer_len); + flush_kernel_dcache_page(kmap_atomic_to_page(buf - sg->offset)); kunmap_atomic(buf - sg->offset, KM_IRQ0); } -- cgit v1.2.3-59-g8ed1b From d9aa3af09cdc5d3ae0e67bed4107bcf7e25b9f31 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Fri, 11 Jan 2008 21:50:46 +0100 Subject: [SCSI] sym53c8xx: fixes two bugs related to chip reset This patch fixes two bugs pointed by James Bottomley: 1. the if (!sym_data->io_reset). That variable is only ever filled by a stack based completion. If we find it non empty it means this code has been entered twice and we have a severe problem, so that should just become a BUG_ON(sym_data->io_reset). 2. sym_data->io_reset should be set to NULL before the routine is exited otherwise the PCI recovery code could end up completing what will be a bogus pointer into the stack. Big thanks to James Bottomley for help with the patch. Signed-off-by: Krzysztof Helt Signed-off-by: James Bottomley --- drivers/scsi/sym53c8xx_2/sym_glue.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index 09bbb39efe88..dc9af8f8f260 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -609,22 +609,24 @@ static int sym_eh_handler(int op, char *opname, struct scsi_cmnd *cmd) */ #define WAIT_FOR_PCI_RECOVERY 35 if (pci_channel_offline(pdev)) { - struct completion *io_reset; int finished_reset = 0; init_completion(&eh_done); spin_lock_irq(shost->host_lock); /* Make sure we didn't race */ if (pci_channel_offline(pdev)) { - if (!sym_data->io_reset) - sym_data->io_reset = &eh_done; - io_reset = sym_data->io_reset; + BUG_ON(sym_data->io_reset); + sym_data->io_reset = &eh_done; } else { finished_reset = 1; } spin_unlock_irq(shost->host_lock); if (!finished_reset) - finished_reset = wait_for_completion_timeout(io_reset, + finished_reset = wait_for_completion_timeout + (sym_data->io_reset, WAIT_FOR_PCI_RECOVERY*HZ); + spin_lock_irq(shost->host_lock); + sym_data->io_reset = NULL; + spin_unlock_irq(shost->host_lock); if (!finished_reset) return SCSI_FAILED; } @@ -1879,7 +1881,6 @@ static void sym2_io_resume(struct pci_dev *pdev) spin_lock_irq(shost->host_lock); if (sym_data->io_reset) complete_all(sym_data->io_reset); - sym_data->io_reset = NULL; spin_unlock_irq(shost->host_lock); } -- cgit v1.2.3-59-g8ed1b From 0995ad382df77b438d0c1e4f93ff349aa2eb9caf Mon Sep 17 00:00:00 2001 From: "Salyzyn, Mark" Date: Fri, 11 Jan 2008 11:56:07 -0800 Subject: [SCSI] aacraid: respond to enclosure service events Added support to respond to enclosure service events (controller AIFs) to add, online or offline physical targets reported to sg. Also added online and offlining of arrays. Removed an automatic variable definition in a sub block that hid an earlier definition, determined to be inert as the sub-block use did not interfere. Bumped the driver versioning to stamp the addition of this feature. Signed-off-by: Mark Salyzyn Signed-off-by: James Bottomley --- drivers/scsi/aacraid/aacraid.h | 5 ++- drivers/scsi/aacraid/commsup.c | 96 +++++++++++++++++++++++++++++++++--------- 2 files changed, 79 insertions(+), 22 deletions(-) diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 85b85ae198f4..858b97494343 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -12,7 +12,7 @@ *----------------------------------------------------------------------------*/ #ifndef AAC_DRIVER_BUILD -# define AAC_DRIVER_BUILD 2449 +# define AAC_DRIVER_BUILD 2454 # define AAC_DRIVER_BRANCH "-ms" #endif #define MAXIMUM_NUM_CONTAINERS 32 @@ -1772,6 +1772,9 @@ extern struct aac_common aac_config; #define AifEnConfigChange 3 /* Adapter configuration change */ #define AifEnContainerChange 4 /* Container configuration change */ #define AifEnDeviceFailure 5 /* SCSI device failed */ +#define AifEnEnclosureManagement 13 /* EM_DRIVE_* */ +#define EM_DRIVE_INSERTION 31 +#define EM_DRIVE_REMOVAL 32 #define AifEnBatteryEvent 14 /* Change in Battery State */ #define AifEnAddContainer 15 /* A new array was created */ #define AifEnDeleteContainer 16 /* A container was deleted */ diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index 3a3017d8dc65..6d88f30296e1 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -775,20 +775,20 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr) { struct hw_fib * hw_fib = fibptr->hw_fib_va; struct aac_aifcmd * aifcmd = (struct aac_aifcmd *)hw_fib->data; - u32 container; + u32 channel, id, lun, container; struct scsi_device *device; enum { NOTHING, DELETE, ADD, CHANGE - } device_config_needed; + } device_config_needed = NOTHING; /* Sniff for container changes */ if (!dev || !dev->fsa_dev) return; - container = (u32)-1; + container = channel = id = lun = (u32)-1; /* * We have set this up to try and minimize the number of @@ -901,6 +901,36 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr) case AifEnConfigChange: break; + case AifEnEnclosureManagement: + switch (le32_to_cpu(((__le32 *)aifcmd->data)[3])) { + case EM_DRIVE_INSERTION: + case EM_DRIVE_REMOVAL: + container = le32_to_cpu( + ((__le32 *)aifcmd->data)[2]); + if ((container >> 28)) + break; + channel = (container >> 24) & 0xF; + if (channel >= dev->maximum_num_channels) + break; + id = container & 0xFFFF; + lun = (container >> 16) & 0xFF; + if (id >= dev->maximum_num_physicals) { + /* legacy dev_t ? */ + if ((0x2000 <= id) || lun || channel || + ((channel = (id >> 7) & 0x3F) >= + dev->maximum_num_channels)) + break; + lun = (id >> 4) & 7; + id &= 0xF; + } + channel = aac_phys_to_logical(channel); + device_config_needed = + (((__le32 *)aifcmd->data)[3] + == cpu_to_le32(EM_DRIVE_INSERTION)) ? + ADD : DELETE; + break; + } + break; } /* @@ -969,7 +999,7 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr) break; } - device_config_needed = NOTHING; + if (device_config_needed == NOTHING) for (container = 0; container < dev->maximum_num_containers; ++container) { if ((dev->fsa_dev[container].config_waiting_on == 0) && @@ -978,6 +1008,9 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr) device_config_needed = dev->fsa_dev[container].config_needed; dev->fsa_dev[container].config_needed = NOTHING; + channel = CONTAINER_TO_CHANNEL(container); + id = CONTAINER_TO_ID(container); + lun = CONTAINER_TO_LUN(container); break; } } @@ -1001,34 +1034,56 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr) /* * force reload of disk info via aac_probe_container */ - if ((device_config_needed == CHANGE) - && (dev->fsa_dev[container].valid == 1)) - dev->fsa_dev[container].valid = 2; - if ((device_config_needed == CHANGE) || - (device_config_needed == ADD)) + if ((channel == CONTAINER_CHANNEL) && + (device_config_needed != NOTHING)) { + if (dev->fsa_dev[container].valid == 1) + dev->fsa_dev[container].valid = 2; aac_probe_container(dev, container); - device = scsi_device_lookup(dev->scsi_host_ptr, - CONTAINER_TO_CHANNEL(container), - CONTAINER_TO_ID(container), - CONTAINER_TO_LUN(container)); + } + device = scsi_device_lookup(dev->scsi_host_ptr, channel, id, lun); if (device) { switch (device_config_needed) { case DELETE: + if (scsi_device_online(device)) { + scsi_device_set_state(device, SDEV_OFFLINE); + sdev_printk(KERN_INFO, device, + "Device offlined - %s\n", + (channel == CONTAINER_CHANNEL) ? + "array deleted" : + "enclosure services event"); + } + break; + case ADD: + if (!scsi_device_online(device)) { + sdev_printk(KERN_INFO, device, + "Device online - %s\n", + (channel == CONTAINER_CHANNEL) ? + "array created" : + "enclosure services event"); + scsi_device_set_state(device, SDEV_RUNNING); + } + /* FALLTHRU */ case CHANGE: + if ((channel == CONTAINER_CHANNEL) + && (!dev->fsa_dev[container].valid)) { + if (!scsi_device_online(device)) + break; + scsi_device_set_state(device, SDEV_OFFLINE); + sdev_printk(KERN_INFO, device, + "Device offlined - %s\n", + "array failed"); + break; + } scsi_rescan_device(&device->sdev_gendev); default: break; } scsi_device_put(device); + device_config_needed = NOTHING; } - if (device_config_needed == ADD) { - scsi_add_device(dev->scsi_host_ptr, - CONTAINER_TO_CHANNEL(container), - CONTAINER_TO_ID(container), - CONTAINER_TO_LUN(container)); - } - + if (device_config_needed == ADD) + scsi_add_device(dev->scsi_host_ptr, channel, id, lun); } static int _aac_reset_adapter(struct aac_dev *aac, int forced) @@ -1469,7 +1524,6 @@ int aac_command_thread(void *data) *(__le32 *)hw_fib->data = cpu_to_le32(ST_OK); aac_fib_adapter_complete(fib, (u16)sizeof(u32)); } else { - struct list_head *entry; /* The u32 here is important and intended. We are using 32bit wrapping time to fit the adapter field */ -- cgit v1.2.3-59-g8ed1b From 3bc8070fb75b33151791fb54ca36ae5abcc8b8df Mon Sep 17 00:00:00 2001 From: "Salyzyn, Mark" Date: Fri, 11 Jan 2008 13:46:24 -0800 Subject: [SCSI] aacraid: SMC vendor identification Due to an internal limit associated with the AdapterTypeText field, SMC required a product ID that overloaded the combined vendor and product ID. A decision was made to ship the SMC products without a vendor string dropping the defacto space that used to delineate vendor and product to boot. To correct this, we needed to adjust the code in the driver to parse out the vendor and product strings for the adapter. We match of 'AOC' in the AdapterTypeText, if so we set the vendor to SMC and place the entire AdapterTypeText into the product field. This only affects the cosmetic presentation of the Adapter vendor and product in the logs and in sysfs. Signed-off-by: Mark Salyzyn Signed-off-by: James Bottomley --- drivers/scsi/aacraid/aachba.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index 970a8d99107a..62d95165d2a6 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -716,16 +716,21 @@ static void setinqstr(struct aac_dev *dev, void *data, int tindex) if (dev->supplement_adapter_info.AdapterTypeText[0]) { char * cp = dev->supplement_adapter_info.AdapterTypeText; - int c = sizeof(str->vid); - while (*cp && *cp != ' ' && --c) - ++cp; - c = *cp; - *cp = '\0'; - inqstrcpy (dev->supplement_adapter_info.AdapterTypeText, - str->vid); - *cp = c; - while (*cp && *cp != ' ') - ++cp; + int c; + if ((cp[0] == 'A') && (cp[1] == 'O') && (cp[2] == 'C')) + inqstrcpy("SMC", str->vid); + else { + c = sizeof(str->vid); + while (*cp && *cp != ' ' && --c) + ++cp; + c = *cp; + *cp = '\0'; + inqstrcpy (dev->supplement_adapter_info.AdapterTypeText, + str->vid); + *cp = c; + while (*cp && *cp != ' ') + ++cp; + } while (*cp == ' ') ++cp; /* last six chars reserved for vol type */ -- cgit v1.2.3-59-g8ed1b From cc75e8ab6f262a3ea60e8d8268f48da5365f2823 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Sun, 13 Jan 2008 02:20:18 +0900 Subject: [SCSI] libsas: fix sense_buffer overrun Signed-off-by: FUJITA Tomonori Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_scsi_host.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index b784089b18d0..828fed1114ee 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -108,7 +108,7 @@ static void sas_scsi_task_done(struct sas_task *task) break; case SAM_CHECK_COND: memcpy(sc->sense_buffer, ts->buf, - max(SCSI_SENSE_BUFFERSIZE, ts->buf_valid_size)); + min(SCSI_SENSE_BUFFERSIZE, ts->buf_valid_size)); stat = SAM_CHECK_COND; break; default: -- cgit v1.2.3-59-g8ed1b From 382db811a8cc1427efabdc959cd1aeef8685ffa6 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 10 Jan 2008 14:33:16 -0800 Subject: [SCSI] megaraid: fix section mismatch Change megaraid_pci_driver_g variable name so that it matches the modpost whitelist that allows pointers to init text/data. WARNING: vmlinux.o(.data+0x1a8e30): Section mismatch: reference to .init.text:megaraid_probe_one (between 'megaraid_pci_driver_g' and 'class_device_attr_megaraid_mbox_app_hndl') Signed-off-by: Randy Dunlap Signed-off-by: James Bottomley --- drivers/scsi/megaraid/megaraid_mbox.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index c8923108183a..24e32e446e76 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -300,7 +300,7 @@ static struct pci_device_id pci_id_table_g[] = { MODULE_DEVICE_TABLE(pci, pci_id_table_g); -static struct pci_driver megaraid_pci_driver_g = { +static struct pci_driver megaraid_pci_driver = { .name = "megaraid", .id_table = pci_id_table_g, .probe = megaraid_probe_one, @@ -394,7 +394,7 @@ megaraid_init(void) // register as a PCI hot-plug driver module - rval = pci_register_driver(&megaraid_pci_driver_g); + rval = pci_register_driver(&megaraid_pci_driver); if (rval < 0) { con_log(CL_ANN, (KERN_WARNING "megaraid: could not register hotplug support.\n")); @@ -415,7 +415,7 @@ megaraid_exit(void) con_log(CL_DLEVEL1, (KERN_NOTICE "megaraid: unloading framework\n")); // unregister as PCI hotplug driver - pci_unregister_driver(&megaraid_pci_driver_g); + pci_unregister_driver(&megaraid_pci_driver); return; } -- cgit v1.2.3-59-g8ed1b From 94aa5e5f6251ca0e1d77e083f8c2f9f40ee548c5 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Sun, 13 Jan 2008 15:46:12 +0900 Subject: [SCSI] aic7xxx_old, eata_pio, ips, libsas: don't zero out sense_buffer in queuecommand LLDs don't need to zero out scsi_cmnd::sense_buffer in queuecommand since scsi-ml does. This is a preparation of the future changes to allocate the sense_buffer only when necessary. Many LLDs zero out the sense_buffer before touching it on the error case. This patch lets them alone for now because new APIs for them would be added later on. Signed-off-by: FUJITA Tomonori Acked-by: "Salyzyn, Mark" Signed-off-by: James Bottomley --- drivers/scsi/aic7xxx_old.c | 1 - drivers/scsi/eata_pio.c | 1 - drivers/scsi/ips.c | 3 --- drivers/scsi/libsas/sas_scsi_host.c | 1 - 4 files changed, 6 deletions(-) diff --git a/drivers/scsi/aic7xxx_old.c b/drivers/scsi/aic7xxx_old.c index 8f8db5f0aef7..2b402fafd009 100644 --- a/drivers/scsi/aic7xxx_old.c +++ b/drivers/scsi/aic7xxx_old.c @@ -10293,7 +10293,6 @@ static int aic7xxx_queue(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *)) aic7xxx_position(cmd) = scb->hscb->tag; cmd->scsi_done = fn; cmd->result = DID_OK; - memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer)); aic7xxx_error(cmd) = DID_OK; aic7xxx_status(cmd) = 0; cmd->host_scribble = NULL; diff --git a/drivers/scsi/eata_pio.c b/drivers/scsi/eata_pio.c index 9579507f555b..b5a60926e556 100644 --- a/drivers/scsi/eata_pio.c +++ b/drivers/scsi/eata_pio.c @@ -369,7 +369,6 @@ static int eata_pio_queue(struct scsi_cmnd *cmd, cp = &hd->ccb[y]; memset(cp, 0, sizeof(struct eata_ccb)); - memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer)); cp->status = USED; /* claim free slot */ diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c index e54d30c6a342..b1b229506113 100644 --- a/drivers/scsi/ips.c +++ b/drivers/scsi/ips.c @@ -2736,8 +2736,6 @@ ips_next(ips_ha_t * ha, int intr) SC->result = DID_OK; SC->host_scribble = NULL; - memset(SC->sense_buffer, 0, sizeof (SC->sense_buffer)); - scb->target_id = SC->device->id; scb->lun = SC->device->lun; scb->bus = SC->device->channel; @@ -3821,7 +3819,6 @@ ips_send_cmd(ips_ha_t * ha, ips_scb_t * scb) /* attempted, a Check Condition occurred, and Sense */ /* Data indicating an Invalid CDB OpCode is returned. */ sp = (char *) scb->scsi_cmd->sense_buffer; - memset(sp, 0, sizeof (scb->scsi_cmd->sense_buffer)); sp[0] = 0x70; /* Error Code */ sp[2] = ILLEGAL_REQUEST; /* Sense Key 5 Illegal Req. */ diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index 828fed1114ee..9c0422546331 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -148,7 +148,6 @@ static struct sas_task *sas_create_task(struct scsi_cmnd *cmd, if (!task) return NULL; - *(u32 *)cmd->sense_buffer = 0; task->uldd_task = cmd; ASSIGN_SAS_TASK(cmd, task); -- cgit v1.2.3-59-g8ed1b From b80ca4f7ee36c26d300c5a8f429e73372d153379 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Sun, 13 Jan 2008 15:46:13 +0900 Subject: [SCSI] replace sizeof sense_buffer with SCSI_SENSE_BUFFERSIZE This replaces sizeof sense_buffer with SCSI_SENSE_BUFFERSIZE in several LLDs. It's a preparation for the future changes to remove sense_buffer array in scsi_cmnd structure. Signed-off-by: FUJITA Tomonori Signed-off-by: James Bottomley --- drivers/message/fusion/mptscsih.c | 2 +- drivers/message/i2o/i2o_scsi.c | 2 +- drivers/scsi/53c700.c | 11 ++++++----- drivers/scsi/BusLogic.c | 2 +- drivers/scsi/aacraid/aachba.c | 32 ++++++++++++++++---------------- drivers/scsi/advansys.c | 14 +++++++------- drivers/scsi/aha1542.c | 4 ++-- drivers/scsi/aha1740.c | 2 +- drivers/scsi/aic7xxx/aic79xx_osm.c | 6 +++--- drivers/scsi/aic7xxx/aic7xxx_osm.c | 6 +++--- drivers/scsi/aic7xxx_old.c | 10 +++++----- drivers/scsi/arcmsr/arcmsr_hba.c | 6 +++--- drivers/scsi/dc395x.c | 16 +++++++--------- drivers/scsi/dpt_i2o.c | 5 ++--- drivers/scsi/eata.c | 4 ++-- drivers/scsi/hptiop.c | 2 +- drivers/scsi/ips.c | 6 ++---- drivers/scsi/ncr53c8xx.c | 3 ++- drivers/scsi/qla1280.c | 4 ++-- drivers/scsi/qla2xxx/qla_isr.c | 12 ++++++------ drivers/scsi/qla4xxx/ql4_isr.c | 11 ++++------- drivers/scsi/qlogicpti.c | 2 +- drivers/scsi/scsi_error.c | 6 +++--- drivers/scsi/scsi_lib.c | 2 +- drivers/scsi/sym53c8xx_2/sym_glue.c | 5 ++--- drivers/scsi/tmscsim.c | 6 +++--- drivers/scsi/u14-34f.c | 4 ++-- drivers/scsi/ultrastor.c | 2 +- 28 files changed, 90 insertions(+), 97 deletions(-) diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index 626bb3c9af2b..5c614ec38cc4 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -111,7 +111,7 @@ int mptscsih_suspend(struct pci_dev *pdev, pm_message_t state); int mptscsih_resume(struct pci_dev *pdev); #endif -#define SNS_LEN(scp) sizeof((scp)->sense_buffer) +#define SNS_LEN(scp) SCSI_SENSE_BUFFERSIZE /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c index aa6fb9429d58..1bcdbbb9e7d3 100644 --- a/drivers/message/i2o/i2o_scsi.c +++ b/drivers/message/i2o/i2o_scsi.c @@ -370,7 +370,7 @@ static int i2o_scsi_reply(struct i2o_controller *c, u32 m, */ if (cmd->result) memcpy(cmd->sense_buffer, &msg->body[3], - min(sizeof(cmd->sense_buffer), (size_t) 40)); + min(SCSI_SENSE_BUFFERSIZE, 40)); /* only output error code if AdapterStatus is not HBA_SUCCESS */ if ((error >> 8) & 0xff) diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c index 71ff3fbfce12..f4c4fe90240a 100644 --- a/drivers/scsi/53c700.c +++ b/drivers/scsi/53c700.c @@ -608,7 +608,8 @@ NCR_700_scsi_done(struct NCR_700_Host_Parameters *hostdata, scsi_print_sense("53c700", SCp); #endif - dma_unmap_single(hostdata->dev, slot->dma_handle, sizeof(SCp->sense_buffer), DMA_FROM_DEVICE); + dma_unmap_single(hostdata->dev, slot->dma_handle, + SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE); /* restore the old result if the request sense was * successful */ if (result == 0) @@ -1010,7 +1011,7 @@ process_script_interrupt(__u32 dsps, __u32 dsp, struct scsi_cmnd *SCp, cmnd[1] = (SCp->device->lun & 0x7) << 5; cmnd[2] = 0; cmnd[3] = 0; - cmnd[4] = sizeof(SCp->sense_buffer); + cmnd[4] = SCSI_SENSE_BUFFERSIZE; cmnd[5] = 0; /* Here's a quiet hack: the * REQUEST_SENSE command is six bytes, @@ -1024,14 +1025,14 @@ process_script_interrupt(__u32 dsps, __u32 dsp, struct scsi_cmnd *SCp, SCp->cmd_len = 6; /* command length for * REQUEST_SENSE */ slot->pCmd = dma_map_single(hostdata->dev, cmnd, MAX_COMMAND_SIZE, DMA_TO_DEVICE); - slot->dma_handle = dma_map_single(hostdata->dev, SCp->sense_buffer, sizeof(SCp->sense_buffer), DMA_FROM_DEVICE); - slot->SG[0].ins = bS_to_host(SCRIPT_MOVE_DATA_IN | sizeof(SCp->sense_buffer)); + slot->dma_handle = dma_map_single(hostdata->dev, SCp->sense_buffer, SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE); + slot->SG[0].ins = bS_to_host(SCRIPT_MOVE_DATA_IN | SCSI_SENSE_BUFFERSIZE); slot->SG[0].pAddr = bS_to_host(slot->dma_handle); slot->SG[1].ins = bS_to_host(SCRIPT_RETURN); slot->SG[1].pAddr = 0; slot->resume_offset = hostdata->pScript; dma_cache_sync(hostdata->dev, slot->SG, sizeof(slot->SG[0])*2, DMA_TO_DEVICE); - dma_cache_sync(hostdata->dev, SCp->sense_buffer, sizeof(SCp->sense_buffer), DMA_FROM_DEVICE); + dma_cache_sync(hostdata->dev, SCp->sense_buffer, SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE); /* queue the command for reissue */ slot->state = NCR_700_SLOT_QUEUED; diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c index 49e1ffa4b2ff..ead47c143ce0 100644 --- a/drivers/scsi/BusLogic.c +++ b/drivers/scsi/BusLogic.c @@ -2947,7 +2947,7 @@ static int BusLogic_QueueCommand(struct scsi_cmnd *Command, void (*CompletionRou } } memcpy(CCB->CDB, CDB, CDB_Length); - CCB->SenseDataLength = sizeof(Command->sense_buffer); + CCB->SenseDataLength = SCSI_SENSE_BUFFERSIZE; CCB->SenseDataPointer = pci_map_single(HostAdapter->PCI_Device, Command->sense_buffer, CCB->SenseDataLength, PCI_DMA_FROMDEVICE); CCB->Command = Command; Command->scsi_done = CompletionRoutine; diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index 62d95165d2a6..aadedbd63083 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -912,8 +912,8 @@ static int aac_bounds_32(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba) ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0, 0, 0); memcpy(cmd->sense_buffer, &dev->fsa_dev[cid].sense_data, - (sizeof(dev->fsa_dev[cid].sense_data) > sizeof(cmd->sense_buffer)) - ? sizeof(cmd->sense_buffer) + (sizeof(dev->fsa_dev[cid].sense_data) > SCSI_SENSE_BUFFERSIZE) + ? SCSI_SENSE_BUFFERSIZE : sizeof(dev->fsa_dev[cid].sense_data)); cmd->scsi_done(cmd); return 1; @@ -1525,8 +1525,8 @@ static void io_callback(void *context, struct fib * fibptr) ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0, 0, 0); memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, - (sizeof(dev->fsa_dev[cid].sense_data) > sizeof(scsicmd->sense_buffer)) - ? sizeof(scsicmd->sense_buffer) + (sizeof(dev->fsa_dev[cid].sense_data) > SCSI_SENSE_BUFFERSIZE) + ? SCSI_SENSE_BUFFERSIZE : sizeof(dev->fsa_dev[cid].sense_data)); } aac_fib_complete(fibptr); @@ -1739,8 +1739,8 @@ static void synchronize_callback(void *context, struct fib *fibptr) ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0, 0, 0); memcpy(cmd->sense_buffer, &dev->fsa_dev[cid].sense_data, - min(sizeof(dev->fsa_dev[cid].sense_data), - sizeof(cmd->sense_buffer))); + min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data), + SCSI_SENSE_BUFFERSIZE)); } aac_fib_complete(fibptr); @@ -1949,8 +1949,8 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) SENCODE_INVALID_COMMAND, ASENCODE_INVALID_COMMAND, 0, 0, 0, 0); memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, - (sizeof(dev->fsa_dev[cid].sense_data) > sizeof(scsicmd->sense_buffer)) - ? sizeof(scsicmd->sense_buffer) + (sizeof(dev->fsa_dev[cid].sense_data) > SCSI_SENSE_BUFFERSIZE) + ? SCSI_SENSE_BUFFERSIZE : sizeof(dev->fsa_dev[cid].sense_data)); scsicmd->scsi_done(scsicmd); return 0; @@ -2002,8 +2002,8 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, (sizeof(dev->fsa_dev[cid].sense_data) > - sizeof(scsicmd->sense_buffer)) - ? sizeof(scsicmd->sense_buffer) + SCSI_SENSE_BUFFERSIZE) + ? SCSI_SENSE_BUFFERSIZE : sizeof(dev->fsa_dev[cid].sense_data)); } scsicmd->scsi_done(scsicmd); @@ -2259,8 +2259,8 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) ILLEGAL_REQUEST, SENCODE_INVALID_COMMAND, ASENCODE_INVALID_COMMAND, 0, 0, 0, 0); memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, - (sizeof(dev->fsa_dev[cid].sense_data) > sizeof(scsicmd->sense_buffer)) - ? sizeof(scsicmd->sense_buffer) + (sizeof(dev->fsa_dev[cid].sense_data) > SCSI_SENSE_BUFFERSIZE) + ? SCSI_SENSE_BUFFERSIZE : sizeof(dev->fsa_dev[cid].sense_data)); scsicmd->scsi_done(scsicmd); return 0; @@ -2422,8 +2422,8 @@ static void aac_srb_callback(void *context, struct fib * fibptr) int len; printk(KERN_WARNING "aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply->status)); len = (le32_to_cpu(srbreply->sense_data_size) > - sizeof(scsicmd->sense_buffer)) ? - sizeof(scsicmd->sense_buffer) : + SCSI_SENSE_BUFFERSIZE) ? + SCSI_SENSE_BUFFERSIZE : le32_to_cpu(srbreply->sense_data_size); scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; memcpy(scsicmd->sense_buffer, srbreply->sense_data, len); @@ -2528,8 +2528,8 @@ static void aac_srb_callback(void *context, struct fib * fibptr) int len; scsicmd->result |= SAM_STAT_CHECK_CONDITION; len = (le32_to_cpu(srbreply->sense_data_size) > - sizeof(scsicmd->sense_buffer)) ? - sizeof(scsicmd->sense_buffer) : + SCSI_SENSE_BUFFERSIZE) ? + SCSI_SENSE_BUFFERSIZE : le32_to_cpu(srbreply->sense_data_size); #ifdef AAC_DETAILED_STATUS_INFO printk(KERN_WARNING "aac_srb_callback: check condition, status = %d len=%d\n", diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c index 9dd3952516c5..492702ba6463 100644 --- a/drivers/scsi/advansys.c +++ b/drivers/scsi/advansys.c @@ -8233,7 +8233,7 @@ static void adv_isr_callback(ADV_DVC_VAR *adv_dvc_varp, ADV_SCSI_REQ_Q *scsiqp) if (scsiqp->scsi_status == SAM_STAT_CHECK_CONDITION) { ASC_DBG(2, "SAM_STAT_CHECK_CONDITION\n"); ASC_DBG_PRT_SENSE(2, scp->sense_buffer, - sizeof(scp->sense_buffer)); + SCSI_SENSE_BUFFERSIZE); /* * Note: The 'status_byte()' macro used by * target drivers defined in scsi.h shifts the @@ -9136,7 +9136,7 @@ static void asc_isr_callback(ASC_DVC_VAR *asc_dvc_varp, ASC_QDONE_INFO *qdonep) BUG_ON(asc_dvc_varp != &boardp->dvc_var.asc_dvc_var); dma_unmap_single(boardp->dev, scp->SCp.dma_handle, - sizeof(scp->sense_buffer), DMA_FROM_DEVICE); + SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE); /* * 'qdonep' contains the command's ending status. */ @@ -9166,7 +9166,7 @@ static void asc_isr_callback(ASC_DVC_VAR *asc_dvc_varp, ASC_QDONE_INFO *qdonep) if (qdonep->d3.scsi_stat == SAM_STAT_CHECK_CONDITION) { ASC_DBG(2, "SAM_STAT_CHECK_CONDITION\n"); ASC_DBG_PRT_SENSE(2, scp->sense_buffer, - sizeof(scp->sense_buffer)); + SCSI_SENSE_BUFFERSIZE); /* * Note: The 'status_byte()' macro used by * target drivers defined in scsi.h shifts the @@ -9881,9 +9881,9 @@ static __le32 advansys_get_sense_buffer_dma(struct scsi_cmnd *scp) { struct asc_board *board = shost_priv(scp->device->host); scp->SCp.dma_handle = dma_map_single(board->dev, scp->sense_buffer, - sizeof(scp->sense_buffer), DMA_FROM_DEVICE); + SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE); dma_cache_sync(board->dev, scp->sense_buffer, - sizeof(scp->sense_buffer), DMA_FROM_DEVICE); + SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE); return cpu_to_le32(scp->SCp.dma_handle); } @@ -9914,7 +9914,7 @@ static int asc_build_req(struct asc_board *boardp, struct scsi_cmnd *scp, asc_scsi_q->q2.target_ix = ASC_TIDLUN_TO_IX(scp->device->id, scp->device->lun); asc_scsi_q->q1.sense_addr = advansys_get_sense_buffer_dma(scp); - asc_scsi_q->q1.sense_len = sizeof(scp->sense_buffer); + asc_scsi_q->q1.sense_len = SCSI_SENSE_BUFFERSIZE; /* * If there are any outstanding requests for the current target, @@ -10173,7 +10173,7 @@ adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp, scsiqp->target_lun = scp->device->lun; scsiqp->sense_addr = cpu_to_le32(virt_to_bus(&scp->sense_buffer[0])); - scsiqp->sense_len = sizeof(scp->sense_buffer); + scsiqp->sense_len = SCSI_SENSE_BUFFERSIZE; /* Build ADV_SCSI_REQ_Q */ diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c index 5b69a88d0e4c..190568ebea3c 100644 --- a/drivers/scsi/aha1542.c +++ b/drivers/scsi/aha1542.c @@ -536,7 +536,7 @@ static void aha1542_intr_handle(struct Scsi_Host *shost, void *dev_id) we will still have it in the cdb when we come back */ if (ccb[mbo].tarstat == 2) memcpy(SCtmp->sense_buffer, &ccb[mbo].cdb[ccb[mbo].cdblen], - sizeof(SCtmp->sense_buffer)); + SCSI_SENSE_BUFFERSIZE); /* is there mail :-) */ @@ -609,7 +609,7 @@ static int aha1542_queuecommand(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *)) #if 0 /* scsi_request_sense() provides a buffer of size 256, so there is no reason to expect equality */ - if (bufflen != sizeof(SCpnt->sense_buffer)) + if (bufflen != SCSI_SENSE_BUFFERSIZE) printk(KERN_CRIT "aha1542: Wrong buffer length supplied " "for request sense (%d)\n", bufflen); #endif diff --git a/drivers/scsi/aha1740.c b/drivers/scsi/aha1740.c index f6722fd46008..be58a0b097c7 100644 --- a/drivers/scsi/aha1740.c +++ b/drivers/scsi/aha1740.c @@ -286,7 +286,7 @@ static irqreturn_t aha1740_intr_handle(int irq, void *dev_id) cdb when we come back */ if ( (adapstat & G2INTST_MASK) == G2INTST_CCBERROR ) { memcpy(SCtmp->sense_buffer, ecbptr->sense, - sizeof(SCtmp->sense_buffer)); + SCSI_SENSE_BUFFERSIZE); errstatus = aha1740_makecode(ecbptr->sense,ecbptr->status); } else errstatus = 0; diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c index 2d020405480c..0e4708fd43c8 100644 --- a/drivers/scsi/aic7xxx/aic79xx_osm.c +++ b/drivers/scsi/aic7xxx/aic79xx_osm.c @@ -1784,7 +1784,7 @@ ahd_linux_handle_scsi_status(struct ahd_softc *ahd, if (scb->flags & SCB_SENSE) { sense_size = min(sizeof(struct scsi_sense_data) - ahd_get_sense_residual(scb), - (u_long)sizeof(cmd->sense_buffer)); + (u_long)SCSI_SENSE_BUFFERSIZE); sense_offset = 0; } else { /* @@ -1795,11 +1795,11 @@ ahd_linux_handle_scsi_status(struct ahd_softc *ahd, scb->sense_data; sense_size = min_t(size_t, scsi_4btoul(siu->sense_length), - sizeof(cmd->sense_buffer)); + SCSI_SENSE_BUFFERSIZE); sense_offset = SIU_SENSE_OFFSET(siu); } - memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer)); + memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); memcpy(cmd->sense_buffer, ahd_get_sense_buf(ahd, scb) + sense_offset, sense_size); diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c index 390b0fc991c5..e310e414067f 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_osm.c +++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c @@ -1801,12 +1801,12 @@ ahc_linux_handle_scsi_status(struct ahc_softc *ahc, sense_size = min(sizeof(struct scsi_sense_data) - ahc_get_sense_residual(scb), - (u_long)sizeof(cmd->sense_buffer)); + (u_long)SCSI_SENSE_BUFFERSIZE); memcpy(cmd->sense_buffer, ahc_get_sense_buf(ahc, scb), sense_size); - if (sense_size < sizeof(cmd->sense_buffer)) + if (sense_size < SCSI_SENSE_BUFFERSIZE) memset(&cmd->sense_buffer[sense_size], 0, - sizeof(cmd->sense_buffer) - sense_size); + SCSI_SENSE_BUFFERSIZE - sense_size); cmd->result |= (DRIVER_SENSE << 24); #ifdef AHC_DEBUG if (ahc_debug & AHC_SHOW_SENSE) { diff --git a/drivers/scsi/aic7xxx_old.c b/drivers/scsi/aic7xxx_old.c index 2b402fafd009..bcb0b870320c 100644 --- a/drivers/scsi/aic7xxx_old.c +++ b/drivers/scsi/aic7xxx_old.c @@ -2696,7 +2696,7 @@ aic7xxx_done(struct aic7xxx_host *p, struct aic7xxx_scb *scb) { pci_unmap_single(p->pdev, le32_to_cpu(scb->sg_list[0].address), - sizeof(cmd->sense_buffer), + SCSI_SENSE_BUFFERSIZE, PCI_DMA_FROMDEVICE); } if (scb->flags & SCB_RECOVERY_SCB) @@ -4267,13 +4267,13 @@ aic7xxx_handle_seqint(struct aic7xxx_host *p, unsigned char intstat) sizeof(generic_sense)); scb->sense_cmd[1] = (cmd->device->lun << 5); - scb->sense_cmd[4] = sizeof(cmd->sense_buffer); + scb->sense_cmd[4] = SCSI_SENSE_BUFFERSIZE; scb->sg_list[0].length = - cpu_to_le32(sizeof(cmd->sense_buffer)); + cpu_to_le32(SCSI_SENSE_BUFFERSIZE); scb->sg_list[0].address = cpu_to_le32(pci_map_single(p->pdev, cmd->sense_buffer, - sizeof(cmd->sense_buffer), + SCSI_SENSE_BUFFERSIZE, PCI_DMA_FROMDEVICE)); /* @@ -4296,7 +4296,7 @@ aic7xxx_handle_seqint(struct aic7xxx_host *p, unsigned char intstat) hscb->residual_data_count[2] = 0; scb->sg_count = hscb->SG_segment_count = 1; - scb->sg_length = sizeof(cmd->sense_buffer); + scb->sg_length = SCSI_SENSE_BUFFERSIZE; scb->tag_action = 0; scb->flags |= SCB_SENSE; /* diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c index d466a2dac1db..d80dba913a75 100644 --- a/drivers/scsi/arcmsr/arcmsr_hba.c +++ b/drivers/scsi/arcmsr/arcmsr_hba.c @@ -634,9 +634,9 @@ static void arcmsr_report_sense_info(struct CommandControlBlock *ccb) pcmd->result = DID_OK << 16; if (sensebuffer) { int sense_data_length = - sizeof(struct SENSE_DATA) < sizeof(pcmd->sense_buffer) - ? sizeof(struct SENSE_DATA) : sizeof(pcmd->sense_buffer); - memset(sensebuffer, 0, sizeof(pcmd->sense_buffer)); + sizeof(struct SENSE_DATA) < SCSI_SENSE_BUFFERSIZE + ? sizeof(struct SENSE_DATA) : SCSI_SENSE_BUFFERSIZE; + memset(sensebuffer, 0, SCSI_SENSE_BUFFERSIZE); memcpy(sensebuffer, ccb->arcmsr_cdb.SenseData, sense_data_length); sensebuffer->ErrorCode = SCSI_SENSE_CURRENT_ERRORS; sensebuffer->Valid = 1; diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c index a9def6e1d30e..f93c73c0ba53 100644 --- a/drivers/scsi/dc395x.c +++ b/drivers/scsi/dc395x.c @@ -1629,8 +1629,7 @@ static u8 start_scsi(struct AdapterCtlBlk* acb, struct DeviceCtlBlk* dcb, DC395x_write8(acb, TRM_S1040_SCSI_FIFO, (dcb->target_lun << 5)); DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 0); DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 0); - DC395x_write8(acb, TRM_S1040_SCSI_FIFO, - sizeof(srb->cmd->sense_buffer)); + DC395x_write8(acb, TRM_S1040_SCSI_FIFO, SCSI_SENSE_BUFFERSIZE); DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 0); } else { ptr = (u8 *)srb->cmd->cmnd; @@ -1915,8 +1914,7 @@ static void command_phase1(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb, DC395x_write8(acb, TRM_S1040_SCSI_FIFO, (dcb->target_lun << 5)); DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 0); DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 0); - DC395x_write8(acb, TRM_S1040_SCSI_FIFO, - sizeof(srb->cmd->sense_buffer)); + DC395x_write8(acb, TRM_S1040_SCSI_FIFO, SCSI_SENSE_BUFFERSIZE); DC395x_write8(acb, TRM_S1040_SCSI_FIFO, 0); } srb->state |= SRB_COMMAND; @@ -3685,7 +3683,7 @@ static void request_sense(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb, srb->target_status = 0; /* KG: Can this prevent crap sense data ? */ - memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer)); + memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); /* Save some data */ srb->segment_x[DC395x_MAX_SG_LISTENTRY - 1].address = @@ -3694,15 +3692,15 @@ static void request_sense(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb, srb->segment_x[0].length; srb->xferred = srb->total_xfer_length; /* srb->segment_x : a one entry of S/G list table */ - srb->total_xfer_length = sizeof(cmd->sense_buffer); - srb->segment_x[0].length = sizeof(cmd->sense_buffer); + srb->total_xfer_length = SCSI_SENSE_BUFFERSIZE; + srb->segment_x[0].length = SCSI_SENSE_BUFFERSIZE; /* Map sense buffer */ srb->segment_x[0].address = pci_map_single(acb->dev, cmd->sense_buffer, - sizeof(cmd->sense_buffer), PCI_DMA_FROMDEVICE); + SCSI_SENSE_BUFFERSIZE, PCI_DMA_FROMDEVICE); dprintkdbg(DBG_SG, "request_sense: map buffer %p->%08x(%05x)\n", cmd->sense_buffer, srb->segment_x[0].address, - sizeof(cmd->sense_buffer)); + SCSI_SENSE_BUFFERSIZE); srb->sg_count = 1; srb->sg_index = 0; diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c index b31d1c95c9fb..577b34c93a07 100644 --- a/drivers/scsi/dpt_i2o.c +++ b/drivers/scsi/dpt_i2o.c @@ -2296,9 +2296,8 @@ static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd) // copy over the request sense data if it was a check // condition status - if(dev_status == 0x02 /*CHECK_CONDITION*/) { - u32 len = sizeof(cmd->sense_buffer); - len = (len > 40) ? 40 : len; + if (dev_status == 0x02 /*CHECK_CONDITION*/) { + u32 len = min(SCSI_SENSE_BUFFERSIZE, 40); // Copy over the sense data memcpy_fromio(cmd->sense_buffer, (reply+28) , len); if(cmd->sense_buffer[0] == 0x70 /* class 7 */ && diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c index 7ead5210de96..05163cefec12 100644 --- a/drivers/scsi/eata.c +++ b/drivers/scsi/eata.c @@ -1623,9 +1623,9 @@ static void map_dma(unsigned int i, struct hostdata *ha) if (SCpnt->sense_buffer) cpp->sense_addr = H2DEV(pci_map_single(ha->pdev, SCpnt->sense_buffer, - sizeof SCpnt->sense_buffer, PCI_DMA_FROMDEVICE)); + SCSI_SENSE_BUFFERSIZE, PCI_DMA_FROMDEVICE)); - cpp->sense_len = sizeof SCpnt->sense_buffer; + cpp->sense_len = SCSI_SENSE_BUFFERSIZE; count = scsi_dma_map(SCpnt); BUG_ON(count < 0); diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c index df1a76438e29..e7b2f3575ce9 100644 --- a/drivers/scsi/hptiop.c +++ b/drivers/scsi/hptiop.c @@ -574,7 +574,7 @@ static void hptiop_finish_scsi_req(struct hptiop_hba *hba, u32 tag, scsi_bufflen(scp) - le32_to_cpu(req->dataxfer_length)); scp->result = SAM_STAT_CHECK_CONDITION; memcpy(&scp->sense_buffer, &req->sg_list, - min_t(size_t, sizeof(scp->sense_buffer), + min_t(size_t, SCSI_SENSE_BUFFERSIZE, le32_to_cpu(req->dataxfer_length))); break; diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c index b1b229506113..7505cca8e68e 100644 --- a/drivers/scsi/ips.c +++ b/drivers/scsi/ips.c @@ -3433,13 +3433,11 @@ ips_map_status(ips_ha_t * ha, ips_scb_t * scb, ips_stat_t * sp) (IPS_DCDB_TABLE_TAPE *) & scb->dcdb; memcpy(scb->scsi_cmd->sense_buffer, tapeDCDB->sense_info, - sizeof (scb->scsi_cmd-> - sense_buffer)); + SCSI_SENSE_BUFFERSIZE); } else { memcpy(scb->scsi_cmd->sense_buffer, scb->dcdb.sense_info, - sizeof (scb->scsi_cmd-> - sense_buffer)); + SCSI_SENSE_BUFFERSIZE); } device_error = 2; /* check condition */ } diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c index 016c462bc771..c02771aa6c9b 100644 --- a/drivers/scsi/ncr53c8xx.c +++ b/drivers/scsi/ncr53c8xx.c @@ -4963,7 +4963,8 @@ void ncr_complete (struct ncb *np, struct ccb *cp) ** Copy back sense data to caller's buffer. */ memcpy(cmd->sense_buffer, cp->sense_buf, - min(sizeof(cmd->sense_buffer), sizeof(cp->sense_buf))); + min_t(size_t, SCSI_SENSE_BUFFERSIZE, + sizeof(cp->sense_buf))); if (DEBUG_FLAGS & (DEBUG_RESULT|DEBUG_TINY)) { u_char * p = (u_char*) & cmd->sense_buffer; diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c index 288640756099..c94906abfee3 100644 --- a/drivers/scsi/qla1280.c +++ b/drivers/scsi/qla1280.c @@ -528,7 +528,7 @@ __setup("qla1280=", qla1280_setup); #define CMD_CDBLEN(Cmnd) Cmnd->cmd_len #define CMD_CDBP(Cmnd) Cmnd->cmnd #define CMD_SNSP(Cmnd) Cmnd->sense_buffer -#define CMD_SNSLEN(Cmnd) sizeof(Cmnd->sense_buffer) +#define CMD_SNSLEN(Cmnd) SCSI_SENSE_BUFFERSIZE #define CMD_RESULT(Cmnd) Cmnd->result #define CMD_HANDLE(Cmnd) Cmnd->host_scribble #define CMD_REQUEST(Cmnd) Cmnd->request->cmd @@ -3715,7 +3715,7 @@ qla1280_status_entry(struct scsi_qla_host *ha, struct response *pkt, } else sense_sz = 0; memset(cmd->sense_buffer + sense_sz, 0, - sizeof(cmd->sense_buffer) - sense_sz); + SCSI_SENSE_BUFFERSIZE - sense_sz); dprintk(2, "qla1280_status_entry: Check " "condition Sense data, b %i, t %i, " diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 798b7e87e2e1..53cbaffbb78c 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -977,13 +977,13 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) break; /* Copy Sense Data into sense buffer. */ - memset(cp->sense_buffer, 0, sizeof(cp->sense_buffer)); + memset(cp->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); if (!(scsi_status & SS_SENSE_LEN_VALID)) break; - if (sense_len >= sizeof(cp->sense_buffer)) - sense_len = sizeof(cp->sense_buffer); + if (sense_len >= SCSI_SENSE_BUFFERSIZE) + sense_len = SCSI_SENSE_BUFFERSIZE; CMD_ACTUAL_SNSLEN(cp) = sense_len; sp->request_sense_length = sense_len; @@ -1061,13 +1061,13 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) break; /* Copy Sense Data into sense buffer */ - memset(cp->sense_buffer, 0, sizeof(cp->sense_buffer)); + memset(cp->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); if (!(scsi_status & SS_SENSE_LEN_VALID)) break; - if (sense_len >= sizeof(cp->sense_buffer)) - sense_len = sizeof(cp->sense_buffer); + if (sense_len >= SCSI_SENSE_BUFFERSIZE) + sense_len = SCSI_SENSE_BUFFERSIZE; CMD_ACTUAL_SNSLEN(cp) = sense_len; sp->request_sense_length = sense_len; diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c index 4a154beb0d39..0f029d0d7315 100644 --- a/drivers/scsi/qla4xxx/ql4_isr.c +++ b/drivers/scsi/qla4xxx/ql4_isr.c @@ -123,15 +123,14 @@ static void qla4xxx_status_entry(struct scsi_qla_host *ha, break; /* Copy Sense Data into sense buffer. */ - memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer)); + memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); sensebytecnt = le16_to_cpu(sts_entry->senseDataByteCnt); if (sensebytecnt == 0) break; memcpy(cmd->sense_buffer, sts_entry->senseData, - min(sensebytecnt, - (uint16_t) sizeof(cmd->sense_buffer))); + min_t(uint16_t, sensebytecnt, SCSI_SENSE_BUFFERSIZE)); DEBUG2(printk("scsi%ld:%d:%d:%d: %s: sense key = %x, " "ASC/ASCQ = %02x/%02x\n", ha->host_no, @@ -208,8 +207,7 @@ static void qla4xxx_status_entry(struct scsi_qla_host *ha, break; /* Copy Sense Data into sense buffer. */ - memset(cmd->sense_buffer, 0, - sizeof(cmd->sense_buffer)); + memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); sensebytecnt = le16_to_cpu(sts_entry->senseDataByteCnt); @@ -217,8 +215,7 @@ static void qla4xxx_status_entry(struct scsi_qla_host *ha, break; memcpy(cmd->sense_buffer, sts_entry->senseData, - min(sensebytecnt, - (uint16_t) sizeof(cmd->sense_buffer))); + min_t(uint16_t, sensebytecnt, SCSI_SENSE_BUFFERSIZE)); DEBUG2(printk("scsi%ld:%d:%d:%d: %s: sense key = %x, " "ASC/ASCQ = %02x/%02x\n", ha->host_no, diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c index 5bc883182b97..65455ab1f3b9 100644 --- a/drivers/scsi/qlogicpti.c +++ b/drivers/scsi/qlogicpti.c @@ -1142,7 +1142,7 @@ static struct scsi_cmnd *qlogicpti_intr_handler(struct qlogicpti *qpti) if (sts->state_flags & SF_GOT_SENSE) memcpy(Cmnd->sense_buffer, sts->req_sense_data, - sizeof(Cmnd->sense_buffer)); + SCSI_SENSE_BUFFERSIZE); if (sts->hdr.entry_type == ENTRY_STATUS) Cmnd->result = diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 169bc595648a..547e85aa414f 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -625,7 +625,7 @@ void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses, if (sense_bytes) { scmd->request_bufflen = min_t(unsigned, - sizeof(scmd->sense_buffer), sense_bytes); + SCSI_SENSE_BUFFERSIZE, sense_bytes); sg_init_one(&ses->sense_sgl, scmd->sense_buffer, scmd->request_bufflen); scmd->request_buffer = &ses->sense_sgl; @@ -657,7 +657,7 @@ void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses, * Zero the sense buffer. The scsi spec mandates that any * untransferred sense data should be interpreted as being zero. */ - memset(scmd->sense_buffer, 0, sizeof(scmd->sense_buffer)); + memset(scmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); } EXPORT_SYMBOL(scsi_eh_prep_cmnd); @@ -1820,7 +1820,7 @@ int scsi_command_normalize_sense(struct scsi_cmnd *cmd, struct scsi_sense_hdr *sshdr) { return scsi_normalize_sense(cmd->sense_buffer, - sizeof(cmd->sense_buffer), sshdr); + SCSI_SENSE_BUFFERSIZE, sshdr); } EXPORT_SYMBOL(scsi_command_normalize_sense); diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index de601370c05b..4cf902efbdbf 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -441,7 +441,7 @@ static void scsi_init_cmd_errh(struct scsi_cmnd *cmd) { cmd->serial_number = 0; cmd->resid = 0; - memset(cmd->sense_buffer, 0, sizeof cmd->sense_buffer); + memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); if (cmd->cmd_len == 0) cmd->cmd_len = COMMAND_SIZE(cmd->cmnd[0]); } diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index dc9af8f8f260..21e926dcdab0 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -207,10 +207,9 @@ void sym_set_cam_result_error(struct sym_hcb *np, struct sym_ccb *cp, int resid) /* * Bounce back the sense data to user. */ - memset(&cmd->sense_buffer, 0, sizeof(cmd->sense_buffer)); + memset(&cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); memcpy(cmd->sense_buffer, cp->sns_bbuf, - min(sizeof(cmd->sense_buffer), - (size_t)SYM_SNS_BBUF_LEN)); + min(SCSI_SENSE_BUFFERSIZE, SYM_SNS_BBUF_LEN)); #if 0 /* * If the device reports a UNIT ATTENTION condition diff --git a/drivers/scsi/tmscsim.c b/drivers/scsi/tmscsim.c index 44193049c4ae..5b04ddfed26c 100644 --- a/drivers/scsi/tmscsim.c +++ b/drivers/scsi/tmscsim.c @@ -444,7 +444,7 @@ static int dc390_pci_map (struct dc390_srb* pSRB) /* Map sense buffer */ if (pSRB->SRBFlag & AUTO_REQSENSE) { - pSRB->pSegmentList = dc390_sg_build_single(&pSRB->Segmentx, pcmd->sense_buffer, sizeof(pcmd->sense_buffer)); + pSRB->pSegmentList = dc390_sg_build_single(&pSRB->Segmentx, pcmd->sense_buffer, SCSI_SENSE_BUFFERSIZE); pSRB->SGcount = pci_map_sg(pdev, pSRB->pSegmentList, 1, DMA_FROM_DEVICE); cmdp->saved_dma_handle = sg_dma_address(pSRB->pSegmentList); @@ -599,7 +599,7 @@ dc390_StartSCSI( struct dc390_acb* pACB, struct dc390_dcb* pDCB, struct dc390_sr DC390_write8 (ScsiFifo, pDCB->TargetLUN << 5); DC390_write8 (ScsiFifo, 0); DC390_write8 (ScsiFifo, 0); - DC390_write8 (ScsiFifo, sizeof(scmd->sense_buffer)); + DC390_write8 (ScsiFifo, SCSI_SENSE_BUFFERSIZE); DC390_write8 (ScsiFifo, 0); DEBUG1(printk (KERN_DEBUG "DC390: AutoReqSense !\n")); } @@ -1389,7 +1389,7 @@ dc390_CommandPhase( struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus DC390_write8 (ScsiFifo, pDCB->TargetLUN << 5); DC390_write8 (ScsiFifo, 0); DC390_write8 (ScsiFifo, 0); - DC390_write8 (ScsiFifo, sizeof(pSRB->pcmd->sense_buffer)); + DC390_write8 (ScsiFifo, SCSI_SENSE_BUFFERSIZE); DC390_write8 (ScsiFifo, 0); DEBUG0(printk(KERN_DEBUG "DC390: AutoReqSense (CmndPhase)!\n")); } diff --git a/drivers/scsi/u14-34f.c b/drivers/scsi/u14-34f.c index 7edd6ceb13b2..4bc5407f9695 100644 --- a/drivers/scsi/u14-34f.c +++ b/drivers/scsi/u14-34f.c @@ -1121,9 +1121,9 @@ static void map_dma(unsigned int i, unsigned int j) { if (SCpnt->sense_buffer) cpp->sense_addr = H2DEV(pci_map_single(HD(j)->pdev, SCpnt->sense_buffer, - sizeof SCpnt->sense_buffer, PCI_DMA_FROMDEVICE)); + SCSI_SENSE_BUFFERSIZE, PCI_DMA_FROMDEVICE)); - cpp->sense_len = sizeof SCpnt->sense_buffer; + cpp->sense_len = SCSI_SENSE_BUFFERSIZE; if (scsi_bufflen(SCpnt)) { count = scsi_dma_map(SCpnt); diff --git a/drivers/scsi/ultrastor.c b/drivers/scsi/ultrastor.c index 6d1f0edd7985..1d3b02976d74 100644 --- a/drivers/scsi/ultrastor.c +++ b/drivers/scsi/ultrastor.c @@ -741,7 +741,7 @@ static int ultrastor_queuecommand(struct scsi_cmnd *SCpnt, } my_mscp->command_link = 0; /*???*/ my_mscp->scsi_command_link_id = 0; /*???*/ - my_mscp->length_of_sense_byte = sizeof SCpnt->sense_buffer; + my_mscp->length_of_sense_byte = SCSI_SENSE_BUFFERSIZE; my_mscp->length_of_scsi_cdbs = SCpnt->cmd_len; memcpy(my_mscp->scsi_cdbs, SCpnt->cmnd, my_mscp->length_of_scsi_cdbs); my_mscp->adapter_status = 0; -- cgit v1.2.3-59-g8ed1b From 3ace426f9575dd112252d72baaee4554fcb2e450 Mon Sep 17 00:00:00 2001 From: "Salyzyn, Mark" Date: Mon, 14 Jan 2008 07:25:33 -0800 Subject: [SCSI] aacraid: replace ' Signed-off-by: James Bottomley --- drivers/scsi/aacraid/aachba.c | 40 ++++++++++++++++------------------------ 1 file changed, 16 insertions(+), 24 deletions(-) diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index aadedbd63083..9bd7173072fe 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -912,9 +912,8 @@ static int aac_bounds_32(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba) ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0, 0, 0); memcpy(cmd->sense_buffer, &dev->fsa_dev[cid].sense_data, - (sizeof(dev->fsa_dev[cid].sense_data) > SCSI_SENSE_BUFFERSIZE) - ? SCSI_SENSE_BUFFERSIZE - : sizeof(dev->fsa_dev[cid].sense_data)); + min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data), + SCSI_SENSE_BUFFERSIZE)); cmd->scsi_done(cmd); return 1; } @@ -1525,9 +1524,8 @@ static void io_callback(void *context, struct fib * fibptr) ASENCODE_INTERNAL_TARGET_FAILURE, 0, 0, 0, 0); memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, - (sizeof(dev->fsa_dev[cid].sense_data) > SCSI_SENSE_BUFFERSIZE) - ? SCSI_SENSE_BUFFERSIZE - : sizeof(dev->fsa_dev[cid].sense_data)); + min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data), + SCSI_SENSE_BUFFERSIZE)); } aac_fib_complete(fibptr); aac_fib_free(fibptr); @@ -1949,9 +1947,8 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) SENCODE_INVALID_COMMAND, ASENCODE_INVALID_COMMAND, 0, 0, 0, 0); memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, - (sizeof(dev->fsa_dev[cid].sense_data) > SCSI_SENSE_BUFFERSIZE) - ? SCSI_SENSE_BUFFERSIZE - : sizeof(dev->fsa_dev[cid].sense_data)); + min_t(size_t, sizeof(dev->fsa_dev[cid].sense_data), + SCSI_SENSE_BUFFERSIZE)); scsicmd->scsi_done(scsicmd); return 0; } @@ -2001,10 +1998,9 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) ASENCODE_NO_SENSE, 0, 7, 2, 0); memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, - (sizeof(dev->fsa_dev[cid].sense_data) > - SCSI_SENSE_BUFFERSIZE) - ? SCSI_SENSE_BUFFERSIZE - : sizeof(dev->fsa_dev[cid].sense_data)); + min_t(size_t, + sizeof(dev->fsa_dev[cid].sense_data), + SCSI_SENSE_BUFFERSIZE)); } scsicmd->scsi_done(scsicmd); return 0; @@ -2259,9 +2255,9 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) ILLEGAL_REQUEST, SENCODE_INVALID_COMMAND, ASENCODE_INVALID_COMMAND, 0, 0, 0, 0); memcpy(scsicmd->sense_buffer, &dev->fsa_dev[cid].sense_data, - (sizeof(dev->fsa_dev[cid].sense_data) > SCSI_SENSE_BUFFERSIZE) - ? SCSI_SENSE_BUFFERSIZE - : sizeof(dev->fsa_dev[cid].sense_data)); + min_t(size_t, + sizeof(dev->fsa_dev[cid].sense_data), + SCSI_SENSE_BUFFERSIZE)); scsicmd->scsi_done(scsicmd); return 0; } @@ -2421,10 +2417,8 @@ static void aac_srb_callback(void *context, struct fib * fibptr) if (le32_to_cpu(srbreply->status) != ST_OK){ int len; printk(KERN_WARNING "aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply->status)); - len = (le32_to_cpu(srbreply->sense_data_size) > - SCSI_SENSE_BUFFERSIZE) ? - SCSI_SENSE_BUFFERSIZE : - le32_to_cpu(srbreply->sense_data_size); + len = min_t(u32, le32_to_cpu(srbreply->sense_data_size), + SCSI_SENSE_BUFFERSIZE); scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; memcpy(scsicmd->sense_buffer, srbreply->sense_data, len); } @@ -2527,10 +2521,8 @@ static void aac_srb_callback(void *context, struct fib * fibptr) if (le32_to_cpu(srbreply->scsi_status) == 0x02 ){ // Check Condition int len; scsicmd->result |= SAM_STAT_CHECK_CONDITION; - len = (le32_to_cpu(srbreply->sense_data_size) > - SCSI_SENSE_BUFFERSIZE) ? - SCSI_SENSE_BUFFERSIZE : - le32_to_cpu(srbreply->sense_data_size); + len = min_t(u32, le32_to_cpu(srbreply->sense_data_size), + SCSI_SENSE_BUFFERSIZE); #ifdef AAC_DETAILED_STATUS_INFO printk(KERN_WARNING "aac_srb_callback: check condition, status = %d len=%d\n", le32_to_cpu(srbreply->status), len); -- cgit v1.2.3-59-g8ed1b From d496f94d22d1491ffb25f4000e85f7a4ecf7f2c4 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 7 Nov 2007 23:58:10 +0000 Subject: [SCSI] aacraid: fix security weakness Actually there are several but one is trivially fixed 1. FSACTL_GET_NEXT_ADAPTER_FIB ioctl does not lock dev->fib_list but needs to 2. Ditto for FSACTL_CLOSE_GET_ADAPTER_FIB 3. It is possible to construct an attack via the SRB ioctls where the user obtains assorted elevated privileges. Various approaches are possible, the trivial ones being things like writing to the raw media via scsi commands and the swap image of other executing programs with higher privileges. So the ioctls should be CAP_SYS_RAWIO - at least all the FIB manipulating ones. This is a bandaid fix for #3 but probably the ioctls should grow their own capable checks. The other two bugs need someone competent in that driver to fix them. Signed-off-by: Alan Cox Signed-off-by: Mark Salyzyn Signed-off-by: James Bottomley --- drivers/scsi/aacraid/linit.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 0523cc6d895c..143e4c16b079 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -517,6 +517,8 @@ static struct device_attribute *aac_dev_attrs[] = { static int aac_ioctl(struct scsi_device *sdev, int cmd, void __user * arg) { struct aac_dev *dev = (struct aac_dev *)sdev->host->hostdata; + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; return aac_do_ioctl(dev, cmd, arg); } -- cgit v1.2.3-59-g8ed1b From eaa3e22e8d32bf7a6176f04efad90f4a5aa67f58 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sun, 13 Jan 2008 17:41:43 +0100 Subject: [SCSI] sg: Only print SCSI data direction warning once for a command When I use cdparanoia my logs get spammed a lot by printk: 464 messages suppressed. sg_write: data in/out 30576/30576 bytes for SCSI command 0xbe--guessing data in; program cdparanoia not setting count and/or reply_len properly printk: 1078 messages suppressed. and many more of those. With this patch the message is only printed once for a command in a row. v1->v2: Prevent rate limit messages too (pointed out by jejb) Signed-off-by: Andi Kleen Acked-by: Douglas Gilbert Signed-off-by: James Bottomley --- drivers/scsi/sg.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index f1871ea04045..e65f5d432662 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -602,8 +602,9 @@ sg_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos) * but is is possible that the app intended SG_DXFER_TO_DEV, because there * is a non-zero input_size, so emit a warning. */ - if (hp->dxfer_direction == SG_DXFER_TO_FROM_DEV) - if (printk_ratelimit()) + if (hp->dxfer_direction == SG_DXFER_TO_FROM_DEV) { + static char cmd[TASK_COMM_LEN]; + if (strcmp(current->comm, cmd) && printk_ratelimit()) { printk(KERN_WARNING "sg_write: data in/out %d/%d bytes for SCSI command 0x%x--" "guessing data in;\n" KERN_WARNING " " @@ -611,6 +612,9 @@ sg_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos) old_hdr.reply_len - (int)SZ_SG_HEADER, input_size, (unsigned int) cmnd[0], current->comm); + strcpy(cmd, current->comm); + } + } k = sg_common_write(sfp, srp, cmnd, sfp->timeout, blocking); return (k < 0) ? k : count; } -- cgit v1.2.3-59-g8ed1b From f7fea185d2998dc4c902ec47834ab6db28fe0029 Mon Sep 17 00:00:00 2001 From: Mathieu Segaud Date: Mon, 14 Jan 2008 15:43:18 +0100 Subject: [SCSI] ch: Convert to use unlocked_ioctl As of now, compat_ioctl already runs without the BKL, whereas ioctl runs with the BKL. This patch first converts changer_fops to use a .unlocked_ioctl member. It applies the same locking rationale than ch_ioctl_compat() uses to ch_ioctl(). Signed-off-by: Mathieu Segaud Reviewed-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/ch.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/drivers/scsi/ch.c b/drivers/scsi/ch.c index 2311019304c0..cead0f5379c5 100644 --- a/drivers/scsi/ch.c +++ b/drivers/scsi/ch.c @@ -92,8 +92,7 @@ static int ch_probe(struct device *); static int ch_remove(struct device *); static int ch_open(struct inode * inode, struct file * filp); static int ch_release(struct inode * inode, struct file * filp); -static int ch_ioctl(struct inode * inode, struct file * filp, - unsigned int cmd, unsigned long arg); +static long ch_ioctl(struct file *filp, unsigned int cmd, unsigned long arg); #ifdef CONFIG_COMPAT static long ch_ioctl_compat(struct file * filp, unsigned int cmd, unsigned long arg); @@ -130,12 +129,12 @@ static struct scsi_driver ch_template = static const struct file_operations changer_fops = { - .owner = THIS_MODULE, - .open = ch_open, - .release = ch_release, - .ioctl = ch_ioctl, + .owner = THIS_MODULE, + .open = ch_open, + .release = ch_release, + .unlocked_ioctl = ch_ioctl, #ifdef CONFIG_COMPAT - .compat_ioctl = ch_ioctl_compat, + .compat_ioctl = ch_ioctl_compat, #endif }; @@ -626,7 +625,7 @@ ch_checkrange(scsi_changer *ch, unsigned int type, unsigned int unit) return 0; } -static int ch_ioctl(struct inode * inode, struct file * file, +static long ch_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { scsi_changer *ch = file->private_data; @@ -887,8 +886,7 @@ static long ch_ioctl_compat(struct file * file, case CHIOINITELEM: case CHIOSVOLTAG: /* compatible */ - return ch_ioctl(NULL /* inode, unused */, - file, cmd, arg); + return ch_ioctl(file, cmd, arg); case CHIOGSTATUS32: { struct changer_element_status32 ces32; -- cgit v1.2.3-59-g8ed1b From d814c5173c671cf2c88d4e07db01b13312467ecd Mon Sep 17 00:00:00 2001 From: "Salyzyn, Mark" Date: Mon, 14 Jan 2008 11:04:40 -0800 Subject: [SCSI] dpt_i2o: use constant instead of bare value 0x02 becomes SAM_STAT_CHECK_CONDITION Signed-off-by: Mark Salyzyn Signed-off-by: James Bottomley --- drivers/scsi/dpt_i2o.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c index 577b34c93a07..19cce125124c 100644 --- a/drivers/scsi/dpt_i2o.c +++ b/drivers/scsi/dpt_i2o.c @@ -2296,7 +2296,7 @@ static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd) // copy over the request sense data if it was a check // condition status - if (dev_status == 0x02 /*CHECK_CONDITION*/) { + if (dev_status == SAM_STAT_CHECK_CONDITION) { u32 len = min(SCSI_SENSE_BUFFERSIZE, 40); // Copy over the sense data memcpy_fromio(cmd->sense_buffer, (reply+28) , len); -- cgit v1.2.3-59-g8ed1b From a24484f281dda11e4fc0041a51907d3564da3d7f Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jan 2008 13:17:47 +0900 Subject: [SCSI] sg: set class_data after success If cdev_add fails in sg_add, sg_remove crashes since class_data is bogus. Signed-off-by: FUJITA Tomonori Acked-by: Douglas Gilbert Signed-off-by: James Bottomley --- drivers/scsi/sg.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index e65f5d432662..ebbf9b4b7e90 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -1422,7 +1422,6 @@ sg_add(struct class_device *cl_dev, struct class_interface *cl_intf) goto out; } - class_set_devdata(cl_dev, sdp); error = cdev_add(cdev, MKDEV(SCSI_GENERIC_MAJOR, sdp->index), 1); if (error) goto cdev_add_err; @@ -1451,6 +1450,8 @@ sg_add(struct class_device *cl_dev, struct class_interface *cl_intf) "Attached scsi generic sg%d type %d\n", sdp->index, scsidp->type); + class_set_devdata(cl_dev, sdp); + return 0; cdev_add_err: -- cgit v1.2.3-59-g8ed1b From d07e03610ca1f4be373f32ad5b25ac00dbdb867d Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jan 2008 13:18:00 +0900 Subject: [SCSI] sg: handle class_device_create failure properly Signed-off-by: FUJITA Tomonori Acked-by: Douglas Gilbert Signed-off-by: James Bottomley --- drivers/scsi/sg.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index ebbf9b4b7e90..78ac48df4de8 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -1434,11 +1434,14 @@ sg_add(struct class_device *cl_dev, struct class_interface *cl_intf) MKDEV(SCSI_GENERIC_MAJOR, sdp->index), cl_dev->dev, "%s", disk->disk_name); - if (IS_ERR(sg_class_member)) - printk(KERN_WARNING "sg_add: " - "class_device_create failed\n"); + if (IS_ERR(sg_class_member)) { + printk(KERN_ERR "sg_add: " + "class_device_create failed\n"); + error = PTR_ERR(sg_class_member); + goto cdev_add_err; + } class_set_devdata(sg_class_member, sdp); - error = sysfs_create_link(&scsidp->sdev_gendev.kobj, + error = sysfs_create_link(&scsidp->sdev_gendev.kobj, &sg_class_member->kobj, "generic"); if (error) printk(KERN_ERR "sg_add: unable to make symlink " -- cgit v1.2.3-59-g8ed1b From 8ce3eca4dc8161e030a055bde94cde28476e0894 Mon Sep 17 00:00:00 2001 From: "Salyzyn, Mark" Date: Wed, 16 Jan 2008 07:39:06 -0800 Subject: [SCSI] aacraid: remove pigs in space I was amazed at how much embedded space was present in the aacraid driver source files. Just selected five files from the set to clean up for now and the attached patch swelled to 73K in size! - Removed trailing space or tabs - Removed spaces embedded within tabs - Replaced leading 8 spaces with tabs - Removed spaces before ) - Removed ClusterCommand as it was unused (noticed it as one triggered by above) - Replaced scsi_status comparison with 0x02, to compare against SAM_STATUS_CHECK_CONDITION. - Replaced a long series of spaces with tabs - Replaced some simple if...defined() with ifdef/ifndef Signed-off-by: Mark Salyzyn Signed-off-by: James Bottomley --- drivers/scsi/aacraid/aachba.c | 243 ++++++++++++++++--------------- drivers/scsi/aacraid/aacraid.h | 310 ++++++++++++++++++++-------------------- drivers/scsi/aacraid/commctrl.c | 80 +++++------ drivers/scsi/aacraid/commsup.c | 201 +++++++++++++------------- drivers/scsi/aacraid/linit.c | 88 ++++++------ 5 files changed, 458 insertions(+), 464 deletions(-) diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index 9bd7173072fe..8d7b7703ee2a 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -56,54 +56,54 @@ /* * Sense codes */ - -#define SENCODE_NO_SENSE 0x00 -#define SENCODE_END_OF_DATA 0x00 -#define SENCODE_BECOMING_READY 0x04 -#define SENCODE_INIT_CMD_REQUIRED 0x04 -#define SENCODE_PARAM_LIST_LENGTH_ERROR 0x1A -#define SENCODE_INVALID_COMMAND 0x20 -#define SENCODE_LBA_OUT_OF_RANGE 0x21 -#define SENCODE_INVALID_CDB_FIELD 0x24 -#define SENCODE_LUN_NOT_SUPPORTED 0x25 -#define SENCODE_INVALID_PARAM_FIELD 0x26 -#define SENCODE_PARAM_NOT_SUPPORTED 0x26 -#define SENCODE_PARAM_VALUE_INVALID 0x26 -#define SENCODE_RESET_OCCURRED 0x29 -#define SENCODE_LUN_NOT_SELF_CONFIGURED_YET 0x3E -#define SENCODE_INQUIRY_DATA_CHANGED 0x3F -#define SENCODE_SAVING_PARAMS_NOT_SUPPORTED 0x39 -#define SENCODE_DIAGNOSTIC_FAILURE 0x40 -#define SENCODE_INTERNAL_TARGET_FAILURE 0x44 -#define SENCODE_INVALID_MESSAGE_ERROR 0x49 -#define SENCODE_LUN_FAILED_SELF_CONFIG 0x4c -#define SENCODE_OVERLAPPED_COMMAND 0x4E + +#define SENCODE_NO_SENSE 0x00 +#define SENCODE_END_OF_DATA 0x00 +#define SENCODE_BECOMING_READY 0x04 +#define SENCODE_INIT_CMD_REQUIRED 0x04 +#define SENCODE_PARAM_LIST_LENGTH_ERROR 0x1A +#define SENCODE_INVALID_COMMAND 0x20 +#define SENCODE_LBA_OUT_OF_RANGE 0x21 +#define SENCODE_INVALID_CDB_FIELD 0x24 +#define SENCODE_LUN_NOT_SUPPORTED 0x25 +#define SENCODE_INVALID_PARAM_FIELD 0x26 +#define SENCODE_PARAM_NOT_SUPPORTED 0x26 +#define SENCODE_PARAM_VALUE_INVALID 0x26 +#define SENCODE_RESET_OCCURRED 0x29 +#define SENCODE_LUN_NOT_SELF_CONFIGURED_YET 0x3E +#define SENCODE_INQUIRY_DATA_CHANGED 0x3F +#define SENCODE_SAVING_PARAMS_NOT_SUPPORTED 0x39 +#define SENCODE_DIAGNOSTIC_FAILURE 0x40 +#define SENCODE_INTERNAL_TARGET_FAILURE 0x44 +#define SENCODE_INVALID_MESSAGE_ERROR 0x49 +#define SENCODE_LUN_FAILED_SELF_CONFIG 0x4c +#define SENCODE_OVERLAPPED_COMMAND 0x4E /* * Additional sense codes */ - -#define ASENCODE_NO_SENSE 0x00 -#define ASENCODE_END_OF_DATA 0x05 -#define ASENCODE_BECOMING_READY 0x01 -#define ASENCODE_INIT_CMD_REQUIRED 0x02 -#define ASENCODE_PARAM_LIST_LENGTH_ERROR 0x00 -#define ASENCODE_INVALID_COMMAND 0x00 -#define ASENCODE_LBA_OUT_OF_RANGE 0x00 -#define ASENCODE_INVALID_CDB_FIELD 0x00 -#define ASENCODE_LUN_NOT_SUPPORTED 0x00 -#define ASENCODE_INVALID_PARAM_FIELD 0x00 -#define ASENCODE_PARAM_NOT_SUPPORTED 0x01 -#define ASENCODE_PARAM_VALUE_INVALID 0x02 -#define ASENCODE_RESET_OCCURRED 0x00 -#define ASENCODE_LUN_NOT_SELF_CONFIGURED_YET 0x00 -#define ASENCODE_INQUIRY_DATA_CHANGED 0x03 -#define ASENCODE_SAVING_PARAMS_NOT_SUPPORTED 0x00 -#define ASENCODE_DIAGNOSTIC_FAILURE 0x80 -#define ASENCODE_INTERNAL_TARGET_FAILURE 0x00 -#define ASENCODE_INVALID_MESSAGE_ERROR 0x00 -#define ASENCODE_LUN_FAILED_SELF_CONFIG 0x00 -#define ASENCODE_OVERLAPPED_COMMAND 0x00 + +#define ASENCODE_NO_SENSE 0x00 +#define ASENCODE_END_OF_DATA 0x05 +#define ASENCODE_BECOMING_READY 0x01 +#define ASENCODE_INIT_CMD_REQUIRED 0x02 +#define ASENCODE_PARAM_LIST_LENGTH_ERROR 0x00 +#define ASENCODE_INVALID_COMMAND 0x00 +#define ASENCODE_LBA_OUT_OF_RANGE 0x00 +#define ASENCODE_INVALID_CDB_FIELD 0x00 +#define ASENCODE_LUN_NOT_SUPPORTED 0x00 +#define ASENCODE_INVALID_PARAM_FIELD 0x00 +#define ASENCODE_PARAM_NOT_SUPPORTED 0x01 +#define ASENCODE_PARAM_VALUE_INVALID 0x02 +#define ASENCODE_RESET_OCCURRED 0x00 +#define ASENCODE_LUN_NOT_SELF_CONFIGURED_YET 0x00 +#define ASENCODE_INQUIRY_DATA_CHANGED 0x03 +#define ASENCODE_SAVING_PARAMS_NOT_SUPPORTED 0x00 +#define ASENCODE_DIAGNOSTIC_FAILURE 0x80 +#define ASENCODE_INTERNAL_TARGET_FAILURE 0x00 +#define ASENCODE_INVALID_MESSAGE_ERROR 0x00 +#define ASENCODE_LUN_FAILED_SELF_CONFIG 0x00 +#define ASENCODE_OVERLAPPED_COMMAND 0x00 #define BYTE0(x) (unsigned char)(x) #define BYTE1(x) (unsigned char)((x) >> 8) @@ -115,8 +115,8 @@ *----------------------------------------------------------------------------*/ /* SCSI inquiry data */ struct inquiry_data { - u8 inqd_pdt; /* Peripheral qualifier | Peripheral Device Type */ - u8 inqd_dtq; /* RMB | Device Type Qualifier */ + u8 inqd_pdt; /* Peripheral qualifier | Peripheral Device Type */ + u8 inqd_dtq; /* RMB | Device Type Qualifier */ u8 inqd_ver; /* ISO version | ECMA version | ANSI-approved version */ u8 inqd_rdf; /* AENC | TrmIOP | Response data format */ u8 inqd_len; /* Additional length (n-4) */ @@ -130,7 +130,7 @@ struct inquiry_data { /* * M O D U L E G L O B A L S */ - + static unsigned long aac_build_sg(struct scsi_cmnd* scsicmd, struct sgmap* sgmap); static unsigned long aac_build_sg64(struct scsi_cmnd* scsicmd, struct sgmap64* psg); static unsigned long aac_build_sgraw(struct scsi_cmnd* scsicmd, struct sgmapraw* psg); @@ -141,8 +141,8 @@ static char *aac_get_status_string(u32 status); /* * Non dasd selection is handled entirely in aachba now - */ - + */ + static int nondasd = -1; static int aac_cache = 0; static int dacmode = -1; @@ -196,12 +196,12 @@ static inline int aac_valid_context(struct scsi_cmnd *scsicmd, struct fib *fibptr) { struct scsi_device *device; - if (unlikely(!scsicmd || !scsicmd->scsi_done )) { + if (unlikely(!scsicmd || !scsicmd->scsi_done)) { dprintk((KERN_WARNING "aac_valid_context: scsi command corrupt\n")); - aac_fib_complete(fibptr); - aac_fib_free(fibptr); - return 0; - } + aac_fib_complete(fibptr); + aac_fib_free(fibptr); + return 0; + } scsicmd->SCp.phase = AAC_OWNER_MIDLEVEL; device = scsicmd->device; if (unlikely(!device || !scsi_device_online(device))) { @@ -243,7 +243,7 @@ int aac_get_config_status(struct aac_dev *dev, int commit_flag) FsaNormal, 1, 1, NULL, NULL); - if (status < 0 ) { + if (status < 0) { printk(KERN_WARNING "aac_get_config_status: SendFIB failed.\n"); } else { struct aac_get_config_status_resp *reply @@ -267,10 +267,10 @@ int aac_get_config_status(struct aac_dev *dev, int commit_flag) struct aac_commit_config * dinfo; aac_fib_init(fibptr); dinfo = (struct aac_commit_config *) fib_data(fibptr); - + dinfo->command = cpu_to_le32(VM_ContainerConfig); dinfo->type = cpu_to_le32(CT_COMMIT_CONFIG); - + status = aac_fib_send(ContainerCommand, fibptr, sizeof (struct aac_commit_config), @@ -296,7 +296,7 @@ int aac_get_config_status(struct aac_dev *dev, int commit_flag) int aac_get_containers(struct aac_dev *dev) { struct fsa_dev_info *fsa_dev_ptr; - u32 index; + u32 index; int status = 0; struct fib * fibptr; struct aac_get_container_count *dinfo; @@ -399,7 +399,7 @@ static void get_container_name_callback(void *context, struct fib * fibptr) do { *dp++ = (*sp) ? *sp++ : ' '; } while (--count > 0); - aac_internal_transfer(scsicmd, d, + aac_internal_transfer(scsicmd, d, offsetof(struct inquiry_data, inqd_pid), sizeof(d)); } } @@ -435,13 +435,13 @@ static int aac_get_container_name(struct scsi_cmnd * scsicmd) dinfo->count = cpu_to_le32(sizeof(((struct aac_get_name_resp *)NULL)->data)); status = aac_fib_send(ContainerCommand, - cmd_fibcontext, + cmd_fibcontext, sizeof (struct aac_get_name), - FsaNormal, - 0, 1, - (fib_callback) get_container_name_callback, + FsaNormal, + 0, 1, + (fib_callback)get_container_name_callback, (void *) scsicmd); - + /* * Check that the command queued to the controller */ @@ -449,7 +449,7 @@ static int aac_get_container_name(struct scsi_cmnd * scsicmd) scsicmd->SCp.phase = AAC_OWNER_FIRMWARE; return 0; } - + printk(KERN_WARNING "aac_get_container_name: aac_fib_send failed with status: %d.\n", status); aac_fib_complete(cmd_fibcontext); aac_fib_free(cmd_fibcontext); @@ -656,39 +656,39 @@ struct scsi_inq { * @a: string to copy from * @b: string to copy to * - * Copy a String from one location to another + * Copy a String from one location to another * without copying \0 */ static void inqstrcpy(char *a, char *b) { - while(*a != (char)0) + while (*a != (char)0) *b++ = *a++; } static char *container_types[] = { - "None", - "Volume", - "Mirror", - "Stripe", - "RAID5", - "SSRW", - "SSRO", - "Morph", - "Legacy", - "RAID4", - "RAID10", - "RAID00", - "V-MIRRORS", - "PSEUDO R4", + "None", + "Volume", + "Mirror", + "Stripe", + "RAID5", + "SSRW", + "SSRO", + "Morph", + "Legacy", + "RAID4", + "RAID10", + "RAID00", + "V-MIRRORS", + "PSEUDO R4", "RAID50", "RAID5D", "RAID5D0", "RAID1E", "RAID6", "RAID60", - "Unknown" + "Unknown" }; char * get_container_type(unsigned tindex) @@ -1230,11 +1230,11 @@ int aac_get_adapter_info(struct aac_dev* dev) memset(info,0,sizeof(*info)); rcode = aac_fib_send(RequestAdapterInfo, - fibptr, + fibptr, sizeof(*info), - FsaNormal, + FsaNormal, -1, 1, /* First `interrupt' command uses special wait */ - NULL, + NULL, NULL); if (rcode < 0) { @@ -1266,8 +1266,8 @@ int aac_get_adapter_info(struct aac_dev* dev) } - /* - * GetBusInfo + /* + * GetBusInfo */ aac_fib_init(fibptr); @@ -1301,7 +1301,7 @@ int aac_get_adapter_info(struct aac_dev* dev) char buffer[16]; tmp = le32_to_cpu(dev->adapter_info.kernelrev); printk(KERN_INFO "%s%d: kernel %d.%d-%d[%d] %.*s\n", - dev->name, + dev->name, dev->id, tmp>>24, (tmp>>16)&0xff, @@ -1363,7 +1363,7 @@ int aac_get_adapter_info(struct aac_dev* dev) if (dev->raid_scsi_mode != 0) printk(KERN_INFO "%s%d: ROMB RAID/SCSI mode enabled\n", dev->name, dev->id); - + if (nondasd != -1) dev->nondasd_support = (nondasd!=0); if(dev->nondasd_support != 0) { @@ -1395,7 +1395,7 @@ int aac_get_adapter_info(struct aac_dev* dev) rcode = -ENOMEM; } } - /* + /* * Deal with configuring for the individualized limits of each packet * interface. */ @@ -1419,8 +1419,8 @@ int aac_get_adapter_info(struct aac_dev* dev) if (dev->dac_support) { dev->a_ops.adapter_read = aac_read_block64; dev->a_ops.adapter_write = aac_write_block64; - /* - * 38 scatter gather elements + /* + * 38 scatter gather elements */ dev->scsi_host_ptr->sg_tablesize = (dev->max_fib_size - @@ -1549,7 +1549,7 @@ static int aac_read(struct scsi_cmnd * scsicmd) case READ_6: dprintk((KERN_DEBUG "aachba: received a read(6) command on id %d.\n", scmd_id(scsicmd))); - lba = ((scsicmd->cmnd[1] & 0x1F) << 16) | + lba = ((scsicmd->cmnd[1] & 0x1F) << 16) | (scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3]; count = scsicmd->cmnd[4]; @@ -1559,32 +1559,32 @@ static int aac_read(struct scsi_cmnd * scsicmd) case READ_16: dprintk((KERN_DEBUG "aachba: received a read(16) command on id %d.\n", scmd_id(scsicmd))); - lba = ((u64)scsicmd->cmnd[2] << 56) | - ((u64)scsicmd->cmnd[3] << 48) | + lba = ((u64)scsicmd->cmnd[2] << 56) | + ((u64)scsicmd->cmnd[3] << 48) | ((u64)scsicmd->cmnd[4] << 40) | ((u64)scsicmd->cmnd[5] << 32) | - ((u64)scsicmd->cmnd[6] << 24) | + ((u64)scsicmd->cmnd[6] << 24) | (scsicmd->cmnd[7] << 16) | (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9]; - count = (scsicmd->cmnd[10] << 24) | + count = (scsicmd->cmnd[10] << 24) | (scsicmd->cmnd[11] << 16) | (scsicmd->cmnd[12] << 8) | scsicmd->cmnd[13]; break; case READ_12: dprintk((KERN_DEBUG "aachba: received a read(12) command on id %d.\n", scmd_id(scsicmd))); - lba = ((u64)scsicmd->cmnd[2] << 24) | + lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) | - (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; - count = (scsicmd->cmnd[6] << 24) | + (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; + count = (scsicmd->cmnd[6] << 24) | (scsicmd->cmnd[7] << 16) | - (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9]; + (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9]; break; default: dprintk((KERN_DEBUG "aachba: received a read(10) command on id %d.\n", scmd_id(scsicmd))); - lba = ((u64)scsicmd->cmnd[2] << 24) | - (scsicmd->cmnd[3] << 16) | + lba = ((u64)scsicmd->cmnd[2] << 24) | + (scsicmd->cmnd[3] << 16) | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5]; count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8]; break; @@ -1609,7 +1609,7 @@ static int aac_read(struct scsi_cmnd * scsicmd) scsicmd->SCp.phase = AAC_OWNER_FIRMWARE; return 0; } - + printk(KERN_WARNING "aac_read: aac_fib_send failed with status: %d.\n", status); /* * For some reason, the Fib didn't queue, return QUEUE_FULL @@ -1644,11 +1644,11 @@ static int aac_write(struct scsi_cmnd * scsicmd) } else if (scsicmd->cmnd[0] == WRITE_16) { /* 16 byte command */ dprintk((KERN_DEBUG "aachba: received a write(16) command on id %d.\n", scmd_id(scsicmd))); - lba = ((u64)scsicmd->cmnd[2] << 56) | + lba = ((u64)scsicmd->cmnd[2] << 56) | ((u64)scsicmd->cmnd[3] << 48) | ((u64)scsicmd->cmnd[4] << 40) | ((u64)scsicmd->cmnd[5] << 32) | - ((u64)scsicmd->cmnd[6] << 24) | + ((u64)scsicmd->cmnd[6] << 24) | (scsicmd->cmnd[7] << 16) | (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9]; count = (scsicmd->cmnd[10] << 24) | (scsicmd->cmnd[11] << 16) | @@ -1875,14 +1875,14 @@ static int aac_synchronize(struct scsi_cmnd *scsicmd) * Emulate a SCSI command and queue the required request for the * aacraid firmware. */ - + int aac_scsi_cmd(struct scsi_cmnd * scsicmd) { u32 cid; struct Scsi_Host *host = scsicmd->device->host; struct aac_dev *dev = (struct aac_dev *)host->hostdata; struct fsa_dev_info *fsa_dev_ptr = dev->fsa_dev; - + if (fsa_dev_ptr == NULL) return -1; /* @@ -1938,7 +1938,7 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) * else Command for the controller itself */ else if ((scsicmd->cmnd[0] != INQUIRY) && /* only INQUIRY & TUR cmnd supported for controller */ - (scsicmd->cmnd[0] != TEST_UNIT_READY)) + (scsicmd->cmnd[0] != TEST_UNIT_READY)) { dprintk((KERN_WARNING "Only INQUIRY & TUR command supported for controller, rcvd = 0x%x.\n", scsicmd->cmnd[0])); scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION; @@ -1963,7 +1963,7 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) dprintk((KERN_DEBUG "INQUIRY command, ID: %d.\n", cid)); memset(&inq_data, 0, sizeof (struct inquiry_data)); - if (scsicmd->cmnd[1] & 0x1 ) { + if (scsicmd->cmnd[1] & 0x1) { char *arr = (char *)&inq_data; /* EVPD bit set */ @@ -2204,7 +2204,7 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) return 0; } - switch (scsicmd->cmnd[0]) + switch (scsicmd->cmnd[0]) { case READ_6: case READ_10: @@ -2217,11 +2217,11 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) * corresponds to a container. Needed to convert * containers to /dev/sd device names */ - + if (scsicmd->request->rq_disk) strlcpy(fsa_dev_ptr[cid].devname, scsicmd->request->rq_disk->disk_name, - min(sizeof(fsa_dev_ptr[cid].devname), + min(sizeof(fsa_dev_ptr[cid].devname), sizeof(scsicmd->request->rq_disk->disk_name) + 1)); return aac_read(scsicmd); @@ -2275,7 +2275,7 @@ static int query_disk(struct aac_dev *dev, void __user *arg) return -EFAULT; if (qd.cnum == -1) qd.cnum = qd.id; - else if ((qd.bus == -1) && (qd.id == -1) && (qd.lun == -1)) + else if ((qd.bus == -1) && (qd.id == -1) && (qd.lun == -1)) { if (qd.cnum < 0 || qd.cnum >= dev->maximum_num_containers) return -EINVAL; @@ -2402,7 +2402,7 @@ static void aac_srb_callback(void *context, struct fib * fibptr) scsicmd->sense_buffer[0] = '\0'; /* Initialize sense valid flag to false */ /* - * Calculate resid for sg + * Calculate resid for sg */ scsi_set_resid(scsicmd, scsi_bufflen(scsicmd) @@ -2442,7 +2442,7 @@ static void aac_srb_callback(void *context, struct fib * fibptr) case WRITE_12: case READ_16: case WRITE_16: - if(le32_to_cpu(srbreply->data_xfer_length) < scsicmd->underflow ) { + if (le32_to_cpu(srbreply->data_xfer_length) < scsicmd->underflow) { printk(KERN_WARNING"aacraid: SCSI CMD underflow\n"); } else { printk(KERN_WARNING"aacraid: SCSI CMD Data Overrun\n"); @@ -2511,14 +2511,14 @@ static void aac_srb_callback(void *context, struct fib * fibptr) printk("aacraid: SRB ERROR(%u) %s scsi cmd 0x%x - scsi status 0x%x\n", le32_to_cpu(srbreply->srb_status) & 0x3F, aac_get_status_string( - le32_to_cpu(srbreply->srb_status) & 0x3F), - scsicmd->cmnd[0], + le32_to_cpu(srbreply->srb_status) & 0x3F), + scsicmd->cmnd[0], le32_to_cpu(srbreply->scsi_status)); #endif scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8; break; } - if (le32_to_cpu(srbreply->scsi_status) == 0x02 ){ // Check Condition + if (le32_to_cpu(srbreply->scsi_status) == SAM_STAT_CHECK_CONDITION) { int len; scsicmd->result |= SAM_STAT_CHECK_CONDITION; len = min_t(u32, le32_to_cpu(srbreply->sense_data_size), @@ -2528,7 +2528,6 @@ static void aac_srb_callback(void *context, struct fib * fibptr) le32_to_cpu(srbreply->status), len); #endif memcpy(scsicmd->sense_buffer, srbreply->sense_data, len); - } /* * OR in the scsi status (already shifted up a bit) @@ -2545,7 +2544,7 @@ static void aac_srb_callback(void *context, struct fib * fibptr) * aac_send_scb_fib * @scsicmd: the scsi command block * - * This routine will form a FIB and fill in the aac_srb from the + * This routine will form a FIB and fill in the aac_srb from the * scsicmd passed in. */ @@ -2759,7 +2758,7 @@ static struct aac_srb_status_info srb_status_info[] = { { SRB_STATUS_ERROR_RECOVERY, "Error Recovery"}, { SRB_STATUS_NOT_STARTED, "Not Started"}, { SRB_STATUS_NOT_IN_USE, "Not In Use"}, - { SRB_STATUS_FORCE_ABORT, "Force Abort"}, + { SRB_STATUS_FORCE_ABORT, "Force Abort"}, { SRB_STATUS_DOMAIN_VALIDATION_FAIL,"Domain Validation Failure"}, { 0xff, "Unknown Error"} }; diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 858b97494343..8a5b9c898e5b 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -1,4 +1,4 @@ -#if (!defined(dprintk)) +#ifndef dprintk # define dprintk(x) #endif /* eg: if (nblank(dprintk(x))) */ @@ -50,9 +50,9 @@ struct diskparm /* * Firmware constants */ - + #define CT_NONE 0 -#define CT_OK 218 +#define CT_OK 218 #define FT_FILESYS 8 /* ADAPTEC's "FSA"(tm) filesystem */ #define FT_DRIVE 9 /* physical disk - addressable in scsi by bus/id/lun */ @@ -107,12 +107,12 @@ struct user_sgentryraw { struct sgmap { __le32 count; - struct sgentry sg[1]; + struct sgentry sg[1]; }; struct user_sgmap { u32 count; - struct user_sgentry sg[1]; + struct user_sgentry sg[1]; }; struct sgmap64 { @@ -137,18 +137,18 @@ struct user_sgmapraw { struct creation_info { - u8 buildnum; /* e.g., 588 */ - u8 usec; /* e.g., 588 */ - u8 via; /* e.g., 1 = FSU, - * 2 = API + u8 buildnum; /* e.g., 588 */ + u8 usec; /* e.g., 588 */ + u8 via; /* e.g., 1 = FSU, + * 2 = API */ - u8 year; /* e.g., 1997 = 97 */ + u8 year; /* e.g., 1997 = 97 */ __le32 date; /* - * unsigned Month :4; // 1 - 12 - * unsigned Day :6; // 1 - 32 - * unsigned Hour :6; // 0 - 23 - * unsigned Minute :6; // 0 - 60 - * unsigned Second :6; // 0 - 60 + * unsigned Month :4; // 1 - 12 + * unsigned Day :6; // 1 - 32 + * unsigned Hour :6; // 0 - 23 + * unsigned Minute :6; // 0 - 60 + * unsigned Second :6; // 0 - 60 */ __le32 serial[2]; /* e.g., 0x1DEADB0BFAFAF001 */ }; @@ -184,7 +184,7 @@ struct creation_info /* * Set the queues on a 16 byte alignment */ - + #define QUEUE_ALIGNMENT 16 /* @@ -203,9 +203,9 @@ struct aac_entry { * The adapter assumes the ProducerIndex and ConsumerIndex are grouped * adjacently and in that order. */ - + struct aac_qhdr { - __le64 header_addr;/* Address to hand the adapter to access + __le64 header_addr;/* Address to hand the adapter to access to this queue head */ __le32 *producer; /* The producer index for this queue (host address) */ __le32 *consumer; /* The consumer index for this queue (host address) */ @@ -215,7 +215,7 @@ struct aac_qhdr { * Define all the events which the adapter would like to notify * the host of. */ - + #define HostNormCmdQue 1 /* Change in host normal priority command queue */ #define HostHighCmdQue 2 /* Change in host high priority command queue */ #define HostNormRespQue 3 /* Change in host normal priority response queue */ @@ -286,17 +286,17 @@ struct aac_fibhdr { u8 StructType; /* Type FIB */ u8 Flags; /* Flags for FIB */ __le16 Size; /* Size of this FIB in bytes */ - __le16 SenderSize; /* Size of the FIB in the sender + __le16 SenderSize; /* Size of the FIB in the sender (for response sizing) */ __le32 SenderFibAddress; /* Host defined data in the FIB */ - __le32 ReceiverFibAddress;/* Logical address of this FIB for + __le32 ReceiverFibAddress;/* Logical address of this FIB for the adapter */ u32 SenderData; /* Place holder for the sender to store data */ union { struct { - __le32 _ReceiverTimeStart; /* Timestamp for + __le32 _ReceiverTimeStart; /* Timestamp for receipt of fib */ - __le32 _ReceiverTimeDone; /* Timestamp for + __le32 _ReceiverTimeDone; /* Timestamp for completion of fib */ } _s; } _u; @@ -311,7 +311,7 @@ struct hw_fib { * FIB commands */ -#define TestCommandResponse 1 +#define TestCommandResponse 1 #define TestAdapterCommand 2 /* * Lowlevel and comm commands @@ -349,10 +349,6 @@ struct hw_fib { #define ContainerCommand 500 #define ContainerCommand64 501 #define ContainerRawIo 502 -/* - * Cluster Commands - */ -#define ClusterCommand 550 /* * Scsi Port commands (scsi passthrough) */ @@ -375,19 +371,19 @@ struct hw_fib { */ enum fib_xfer_state { - HostOwned = (1<<0), - AdapterOwned = (1<<1), - FibInitialized = (1<<2), - FibEmpty = (1<<3), - AllocatedFromPool = (1<<4), - SentFromHost = (1<<5), - SentFromAdapter = (1<<6), - ResponseExpected = (1<<7), - NoResponseExpected = (1<<8), - AdapterProcessed = (1<<9), - HostProcessed = (1<<10), - HighPriority = (1<<11), - NormalPriority = (1<<12), + HostOwned = (1<<0), + AdapterOwned = (1<<1), + FibInitialized = (1<<2), + FibEmpty = (1<<3), + AllocatedFromPool = (1<<4), + SentFromHost = (1<<5), + SentFromAdapter = (1<<6), + ResponseExpected = (1<<7), + NoResponseExpected = (1<<8), + AdapterProcessed = (1<<9), + HostProcessed = (1<<10), + HighPriority = (1<<11), + NormalPriority = (1<<12), Async = (1<<13), AsyncIo = (1<<13), // rpbfix: remove with new regime PageFileIo = (1<<14), // rpbfix: remove with new regime @@ -420,7 +416,7 @@ struct aac_init __le32 AdapterFibAlign; __le32 printfbuf; __le32 printfbufsiz; - __le32 HostPhysMemPages; /* number of 4k pages of host + __le32 HostPhysMemPages; /* number of 4k pages of host physical memory */ __le32 HostElapsedSeconds; /* number of seconds since 1970. */ /* @@ -481,7 +477,7 @@ struct adapter_ops struct aac_driver_ident { - int (*init)(struct aac_dev *dev); + int (*init)(struct aac_dev *dev); char * name; char * vname; char * model; @@ -489,7 +485,7 @@ struct aac_driver_ident int quirks; }; /* - * Some adapter firmware needs communication memory + * Some adapter firmware needs communication memory * below 2gig. This tells the init function to set the * dma mask such that fib memory will be allocated where the * adapter firmware can get to it. @@ -531,29 +527,29 @@ struct aac_driver_ident * physically contigous block. The host structure that defines the * commuication queues will assume they are each a separate physically * contigous memory region that will support them all being one big - * contigous block. + * contigous block. * There is a command and response queue for each level and direction of * commuication. These regions are accessed by both the host and adapter. */ - + struct aac_queue { - u64 logical; /*address we give the adapter */ + u64 logical; /*address we give the adapter */ struct aac_entry *base; /*system virtual address */ - struct aac_qhdr headers; /*producer,consumer q headers*/ - u32 entries; /*Number of queue entries */ + struct aac_qhdr headers; /*producer,consumer q headers*/ + u32 entries; /*Number of queue entries */ wait_queue_head_t qfull; /*Event to wait on if q full */ wait_queue_head_t cmdready; /*Cmd ready from the adapter */ - /* This is only valid for adapter to host command queues. */ - spinlock_t *lock; /* Spinlock for this queue must take this lock before accessing the lock */ + /* This is only valid for adapter to host command queues. */ + spinlock_t *lock; /* Spinlock for this queue must take this lock before accessing the lock */ spinlock_t lockdata; /* Actual lock (used only on one side of the lock) */ - struct list_head cmdq; /* A queue of FIBs which need to be prcessed by the FS thread. This is */ - /* only valid for command queues which receive entries from the adapter. */ + struct list_head cmdq; /* A queue of FIBs which need to be prcessed by the FS thread. This is */ + /* only valid for command queues which receive entries from the adapter. */ u32 numpending; /* Number of entries on outstanding queue. */ struct aac_dev * dev; /* Back pointer to adapter structure */ }; /* - * Message queues. The order here is important, see also the + * Message queues. The order here is important, see also the * queue type ordering */ @@ -565,12 +561,12 @@ struct aac_queue_block /* * SaP1 Message Unit Registers */ - + struct sa_drawbridge_CSR { - /* Offset | Name */ + /* Offset | Name */ __le32 reserved[10]; /* 00h-27h | Reserved */ u8 LUT_Offset; /* 28h | Lookup Table Offset */ - u8 reserved1[3]; /* 29h-2bh | Reserved */ + u8 reserved1[3]; /* 29h-2bh | Reserved */ __le32 LUT_Data; /* 2ch | Looup Table Data */ __le32 reserved2[26]; /* 30h-97h | Reserved */ __le16 PRICLEARIRQ; /* 98h | Primary Clear Irq */ @@ -589,8 +585,8 @@ struct sa_drawbridge_CSR { __le32 MAILBOX5; /* bch | Scratchpad 5 */ __le32 MAILBOX6; /* c0h | Scratchpad 6 */ __le32 MAILBOX7; /* c4h | Scratchpad 7 */ - __le32 ROM_Setup_Data; /* c8h | Rom Setup and Data */ - __le32 ROM_Control_Addr;/* cch | Rom Control and Address */ + __le32 ROM_Setup_Data; /* c8h | Rom Setup and Data */ + __le32 ROM_Control_Addr;/* cch | Rom Control and Address */ __le32 reserved3[12]; /* d0h-ffh | reserved */ __le32 LUT[64]; /* 100h-1ffh | Lookup Table Entries */ }; @@ -603,7 +599,7 @@ struct sa_drawbridge_CSR { #define Mailbox5 SaDbCSR.MAILBOX5 #define Mailbox6 SaDbCSR.MAILBOX6 #define Mailbox7 SaDbCSR.MAILBOX7 - + #define DoorbellReg_p SaDbCSR.PRISETIRQ #define DoorbellReg_s SaDbCSR.SECSETIRQ #define DoorbellClrReg_p SaDbCSR.PRICLEARIRQ @@ -617,19 +613,19 @@ struct sa_drawbridge_CSR { #define DOORBELL_5 0x0020 #define DOORBELL_6 0x0040 - + #define PrintfReady DOORBELL_5 #define PrintfDone DOORBELL_5 - + struct sa_registers { struct sa_drawbridge_CSR SaDbCSR; /* 98h - c4h */ }; - + #define Sa_MINIPORT_REVISION 1 #define sa_readw(AEP, CSR) readl(&((AEP)->regs.sa->CSR)) -#define sa_readl(AEP, CSR) readl(&((AEP)->regs.sa->CSR)) +#define sa_readl(AEP, CSR) readl(&((AEP)->regs.sa->CSR)) #define sa_writew(AEP, CSR, value) writew(value, &((AEP)->regs.sa->CSR)) #define sa_writel(AEP, CSR, value) writel(value, &((AEP)->regs.sa->CSR)) @@ -646,21 +642,21 @@ struct rx_mu_registers { __le32 IMRx[2]; /* 1310h | 10h | Inbound Message Registers */ __le32 OMRx[2]; /* 1318h | 18h | Outbound Message Registers */ __le32 IDR; /* 1320h | 20h | Inbound Doorbell Register */ - __le32 IISR; /* 1324h | 24h | Inbound Interrupt + __le32 IISR; /* 1324h | 24h | Inbound Interrupt Status Register */ - __le32 IIMR; /* 1328h | 28h | Inbound Interrupt - Mask Register */ + __le32 IIMR; /* 1328h | 28h | Inbound Interrupt + Mask Register */ __le32 ODR; /* 132Ch | 2Ch | Outbound Doorbell Register */ - __le32 OISR; /* 1330h | 30h | Outbound Interrupt + __le32 OISR; /* 1330h | 30h | Outbound Interrupt Status Register */ - __le32 OIMR; /* 1334h | 34h | Outbound Interrupt + __le32 OIMR; /* 1334h | 34h | Outbound Interrupt Mask Register */ __le32 reserved2; /* 1338h | 38h | Reserved */ __le32 reserved3; /* 133Ch | 3Ch | Reserved */ __le32 InboundQueue;/* 1340h | 40h | Inbound Queue Port relative to firmware */ __le32 OutboundQueue;/*1344h | 44h | Outbound Queue Port relative to firmware */ - /* * Must access through ATU Inbound - Translation Window */ + /* * Must access through ATU Inbound + Translation Window */ }; struct rx_inbound { @@ -716,12 +712,12 @@ struct rkt_registers { typedef void (*fib_callback)(void *ctxt, struct fib *fibctx); struct aac_fib_context { - s16 type; // used for verification of structure - s16 size; + s16 type; // used for verification of structure + s16 size; u32 unique; // unique value representing this context ulong jiffies; // used for cleanup - dmb changed to ulong struct list_head next; // used to link context's into a linked list - struct semaphore wait_sem; // this is used to wait for the next fib to arrive. + struct semaphore wait_sem; // this is used to wait for the next fib to arrive. int wait; // Set to true when thread is in WaitForSingleObject unsigned long count; // total number of FIBs on FibList struct list_head fib_list; // this holds fibs and their attachd hw_fibs @@ -740,9 +736,9 @@ struct sense_data { u8 EOM:1; /* End Of Medium - reserved for random access devices */ u8 filemark:1; /* Filemark - reserved for random access devices */ - u8 information[4]; /* for direct-access devices, contains the unsigned - * logical block address or residue associated with - * the sense key + u8 information[4]; /* for direct-access devices, contains the unsigned + * logical block address or residue associated with + * the sense key */ u8 add_sense_len; /* number of additional sense bytes to follow this field */ u8 cmnd_info[4]; /* not used */ @@ -752,7 +748,7 @@ struct sense_data { u8 bit_ptr:3; /* indicates which byte of the CDB or parameter data * was in error */ - u8 BPV:1; /* bit pointer valid (BPV): 1- indicates that + u8 BPV:1; /* bit pointer valid (BPV): 1- indicates that * the bit_ptr field has valid value */ u8 reserved2:2; @@ -786,24 +782,24 @@ struct fib { /* * The Adapter that this I/O is destined for. */ - struct aac_dev *dev; + struct aac_dev *dev; /* * This is the event the sendfib routine will wait on if the * caller did not pass one and this is synch io. */ - struct semaphore event_wait; + struct semaphore event_wait; spinlock_t event_lock; u32 done; /* gets set to 1 when fib is complete */ - fib_callback callback; - void *callback_data; + fib_callback callback; + void *callback_data; u32 flags; // u32 dmb was ulong /* * And for the internal issue/reply queues (we may be able * to merge these two) */ struct list_head fiblink; - void *data; + void *data; struct hw_fib *hw_fib_va; /* Actual shared object */ dma_addr_t hw_fib_pa; /* physical address of hw_fib*/ }; @@ -813,7 +809,7 @@ struct fib { * * This is returned by the RequestAdapterInfo block */ - + struct aac_adapter_info { __le32 platform; @@ -832,7 +828,7 @@ struct aac_adapter_info __le32 biosrev; __le32 biosbuild; __le32 cluster; - __le32 clusterchannelmask; + __le32 clusterchannelmask; __le32 serial[2]; __le32 battery; __le32 options; @@ -922,13 +918,13 @@ struct aac_bus_info_response { #define AAC_OPT_HOST_TIME_FIB cpu_to_le32(1<<4) #define AAC_OPT_RAID50 cpu_to_le32(1<<5) #define AAC_OPT_4GB_WINDOW cpu_to_le32(1<<6) -#define AAC_OPT_SCSI_UPGRADEABLE cpu_to_le32(1<<7) +#define AAC_OPT_SCSI_UPGRADEABLE cpu_to_le32(1<<7) #define AAC_OPT_SOFT_ERR_REPORT cpu_to_le32(1<<8) -#define AAC_OPT_SUPPORTED_RECONDITION cpu_to_le32(1<<9) +#define AAC_OPT_SUPPORTED_RECONDITION cpu_to_le32(1<<9) #define AAC_OPT_SGMAP_HOST64 cpu_to_le32(1<<10) #define AAC_OPT_ALARM cpu_to_le32(1<<11) #define AAC_OPT_NONDASD cpu_to_le32(1<<12) -#define AAC_OPT_SCSI_MANAGED cpu_to_le32(1<<13) +#define AAC_OPT_SCSI_MANAGED cpu_to_le32(1<<13) #define AAC_OPT_RAID_SCSI_MODE cpu_to_le32(1<<14) #define AAC_OPT_SUPPLEMENT_ADAPTER_INFO cpu_to_le32(1<<16) #define AAC_OPT_NEW_COMM cpu_to_le32(1<<17) @@ -948,7 +944,7 @@ struct aac_dev /* * Map for 128 fib objects (64k) - */ + */ dma_addr_t hw_fib_pa; struct hw_fib *hw_fib_va; struct hw_fib *aif_base_va; @@ -959,24 +955,24 @@ struct aac_dev struct fib *free_fib; spinlock_t fib_lock; - + struct aac_queue_block *queues; /* * The user API will use an IOCTL to register itself to receive * FIBs from the adapter. The following list is used to keep * track of all the threads that have requested these FIBs. The - * mutex is used to synchronize access to all data associated + * mutex is used to synchronize access to all data associated * with the adapter fibs. */ struct list_head fib_list; struct adapter_ops a_ops; unsigned long fsrev; /* Main driver's revision number */ - + unsigned base_size; /* Size of mapped in region */ struct aac_init *init; /* Holds initialization info to communicate with adapter */ - dma_addr_t init_pa; /* Holds physical address of the init struct */ - + dma_addr_t init_pa; /* Holds physical address of the init struct */ + struct pci_dev *pdev; /* Our PCI interface */ void * printfbuf; /* pointer to buffer used for printf's from the adapter */ void * comm_addr; /* Base address of Comm area */ @@ -990,11 +986,11 @@ struct aac_dev struct fsa_dev_info *fsa_dev; struct task_struct *thread; int cardtype; - + /* * The following is the device specific extension. */ -#if (!defined(AAC_MIN_FOOTPRINT_SIZE)) +#ifndef AAC_MIN_FOOTPRINT_SIZE # define AAC_MIN_FOOTPRINT_SIZE 8192 #endif union @@ -1015,7 +1011,7 @@ struct aac_dev /* These are in adapter info but they are in the io flow so * lets break them out so we don't have to do an AND to check them */ - u8 nondasd_support; + u8 nondasd_support; u8 cache_protected; u8 dac_support; u8 raid_scsi_mode; @@ -1078,14 +1074,14 @@ struct aac_dev /* * Define the command values */ - + #define Null 0 -#define GetAttributes 1 -#define SetAttributes 2 -#define Lookup 3 -#define ReadLink 4 -#define Read 5 -#define Write 6 +#define GetAttributes 1 +#define SetAttributes 2 +#define Lookup 3 +#define ReadLink 4 +#define Read 5 +#define Write 6 #define Create 7 #define MakeDirectory 8 #define SymbolicLink 9 @@ -1181,19 +1177,19 @@ struct aac_dev struct aac_read { - __le32 command; - __le32 cid; - __le32 block; - __le32 count; + __le32 command; + __le32 cid; + __le32 block; + __le32 count; struct sgmap sg; // Must be last in struct because it is variable }; struct aac_read64 { - __le32 command; - __le16 cid; - __le16 sector_count; - __le32 block; + __le32 command; + __le16 cid; + __le16 sector_count; + __le32 block; __le16 pad; __le16 flags; struct sgmap64 sg; // Must be last in struct because it is variable @@ -1201,26 +1197,26 @@ struct aac_read64 struct aac_read_reply { - __le32 status; - __le32 count; + __le32 status; + __le32 count; }; struct aac_write { __le32 command; - __le32 cid; - __le32 block; - __le32 count; - __le32 stable; // Not used + __le32 cid; + __le32 block; + __le32 count; + __le32 stable; // Not used struct sgmap sg; // Must be last in struct because it is variable }; struct aac_write64 { - __le32 command; - __le16 cid; - __le16 sector_count; - __le32 block; + __le32 command; + __le16 cid; + __le16 sector_count; + __le32 block; __le16 pad; __le16 flags; #define IO_TYPE_WRITE 0x00000000 @@ -1231,7 +1227,7 @@ struct aac_write64 struct aac_write_reply { __le32 status; - __le32 count; + __le32 count; __le32 committed; }; @@ -1334,10 +1330,10 @@ struct aac_srb_reply #define SRB_NoDataXfer 0x0000 #define SRB_DisableDisconnect 0x0004 #define SRB_DisableSynchTransfer 0x0008 -#define SRB_BypassFrozenQueue 0x0010 +#define SRB_BypassFrozenQueue 0x0010 #define SRB_DisableAutosense 0x0020 #define SRB_DataIn 0x0040 -#define SRB_DataOut 0x0080 +#define SRB_DataOut 0x0080 /* * SRB Functions - set in aac_srb->function @@ -1360,7 +1356,7 @@ struct aac_srb_reply #define SRBF_RemoveDevice 0x0016 #define SRBF_DomainValidation 0x0017 -/* +/* * SRB SCSI Status - set in aac_srb->scsi_status */ #define SRB_STATUS_PENDING 0x00 @@ -1519,17 +1515,17 @@ struct aac_get_container_count_resp { */ struct aac_mntent { - __le32 oid; + __le32 oid; u8 name[16]; /* if applicable */ struct creation_info create_info; /* if applicable */ __le32 capacity; - __le32 vol; /* substrate structure */ - __le32 obj; /* FT_FILESYS, etc. */ - __le32 state; /* unready for mounting, + __le32 vol; /* substrate structure */ + __le32 obj; /* FT_FILESYS, etc. */ + __le32 state; /* unready for mounting, readonly, etc. */ - union aac_contentinfo fileinfo; /* Info specific to content + union aac_contentinfo fileinfo; /* Info specific to content manager (eg, filesystem) */ - __le32 altoid; /* != oid <==> snapshot or + __le32 altoid; /* != oid <==> snapshot or broken mirror exists */ __le32 capacityhigh; }; @@ -1546,7 +1542,7 @@ struct aac_query_mount { struct aac_mount { __le32 status; - __le32 type; /* should be same as that requested */ + __le32 type; /* should be same as that requested */ __le32 count; struct aac_mntent mnt[1]; }; @@ -1616,7 +1612,7 @@ struct aac_delete_disk { u32 disknum; u32 cnum; }; - + struct fib_ioctl { u32 fibctx; @@ -1630,10 +1626,10 @@ struct revision __le32 version; __le32 build; }; - + /* - * Ugly - non Linux like ioctl coding for back compat. + * Ugly - non Linux like ioctl coding for back compat. */ #define CTL_CODE(function, method) ( \ @@ -1641,7 +1637,7 @@ struct revision ) /* - * Define the method codes for how buffers are passed for I/O and FS + * Define the method codes for how buffers are passed for I/O and FS * controls */ @@ -1652,15 +1648,15 @@ struct revision * Filesystem ioctls */ -#define FSACTL_SENDFIB CTL_CODE(2050, METHOD_BUFFERED) -#define FSACTL_SEND_RAW_SRB CTL_CODE(2067, METHOD_BUFFERED) +#define FSACTL_SENDFIB CTL_CODE(2050, METHOD_BUFFERED) +#define FSACTL_SEND_RAW_SRB CTL_CODE(2067, METHOD_BUFFERED) #define FSACTL_DELETE_DISK 0x163 #define FSACTL_QUERY_DISK 0x173 #define FSACTL_OPEN_GET_ADAPTER_FIB CTL_CODE(2100, METHOD_BUFFERED) #define FSACTL_GET_NEXT_ADAPTER_FIB CTL_CODE(2101, METHOD_BUFFERED) #define FSACTL_CLOSE_GET_ADAPTER_FIB CTL_CODE(2102, METHOD_BUFFERED) #define FSACTL_MINIPORT_REV_CHECK CTL_CODE(2107, METHOD_BUFFERED) -#define FSACTL_GET_PCI_INFO CTL_CODE(2119, METHOD_BUFFERED) +#define FSACTL_GET_PCI_INFO CTL_CODE(2119, METHOD_BUFFERED) #define FSACTL_FORCE_DELETE_DISK CTL_CODE(2120, METHOD_NEITHER) #define FSACTL_GET_CONTAINERS 2131 #define FSACTL_SEND_LARGE_FIB CTL_CODE(2138, METHOD_BUFFERED) @@ -1669,7 +1665,7 @@ struct revision struct aac_common { /* - * If this value is set to 1 then interrupt moderation will occur + * If this value is set to 1 then interrupt moderation will occur * in the base commuication support. */ u32 irq_mod; @@ -1698,11 +1694,11 @@ extern struct aac_common aac_config; * The following macro is used when sending and receiving FIBs. It is * only used for debugging. */ - + #ifdef DBG #define FIB_COUNTER_INCREMENT(counter) (counter)++ #else -#define FIB_COUNTER_INCREMENT(counter) +#define FIB_COUNTER_INCREMENT(counter) #endif /* @@ -1734,17 +1730,17 @@ extern struct aac_common aac_config; * * The adapter reports is present state through the phase. Only * a single phase should be ever be set. Each phase can have multiple - * phase status bits to provide more detailed information about the - * state of the board. Care should be taken to ensure that any phase + * phase status bits to provide more detailed information about the + * state of the board. Care should be taken to ensure that any phase * status bits that are set when changing the phase are also valid * for the new phase or be cleared out. Adapter software (monitor, - * iflash, kernel) is responsible for properly maintining the phase + * iflash, kernel) is responsible for properly maintining the phase * status mailbox when it is running. - * - * MONKER_API Phases * - * Phases are bit oriented. It is NOT valid to have multiple bits set - */ + * MONKER_API Phases + * + * Phases are bit oriented. It is NOT valid to have multiple bits set + */ #define SELF_TEST_FAILED 0x00000004 #define MONITOR_PANIC 0x00000020 @@ -1767,8 +1763,8 @@ extern struct aac_common aac_config; * For FIB communication, we need all of the following things * to send back to the user. */ - -#define AifCmdEventNotify 1 /* Notify of event */ + +#define AifCmdEventNotify 1 /* Notify of event */ #define AifEnConfigChange 3 /* Adapter configuration change */ #define AifEnContainerChange 4 /* Container configuration change */ #define AifEnDeviceFailure 5 /* SCSI device failed */ @@ -1792,11 +1788,11 @@ extern struct aac_common aac_config; #define AifDenVolumeExtendComplete 201 /* A volume extend completed */ #define AifReqJobList 100 /* Gets back complete job list */ #define AifReqJobsForCtr 101 /* Gets back jobs for specific container */ -#define AifReqJobsForScsi 102 /* Gets back jobs for specific SCSI device */ -#define AifReqJobReport 103 /* Gets back a specific job report or list of them */ +#define AifReqJobsForScsi 102 /* Gets back jobs for specific SCSI device */ +#define AifReqJobReport 103 /* Gets back a specific job report or list of them */ #define AifReqTerminateJob 104 /* Terminates job */ #define AifReqSuspendJob 105 /* Suspends a job */ -#define AifReqResumeJob 106 /* Resumes a job */ +#define AifReqResumeJob 106 /* Resumes a job */ #define AifReqSendAPIReport 107 /* API generic report requests */ #define AifReqAPIJobStart 108 /* Start a job from the API */ #define AifReqAPIJobUpdate 109 /* Update a job report from the API */ @@ -1815,8 +1811,8 @@ struct aac_aifcmd { }; /** - * Convert capacity to cylinders - * accounting for the fact capacity could be a 64 bit value + * Convert capacity to cylinders + * accounting for the fact capacity could be a 64 bit value * */ static inline unsigned int cap_to_cyls(sector_t capacity, unsigned divisor) diff --git a/drivers/scsi/aacraid/commctrl.c b/drivers/scsi/aacraid/commctrl.c index a27207e27c30..f8afa358b6b6 100644 --- a/drivers/scsi/aacraid/commctrl.c +++ b/drivers/scsi/aacraid/commctrl.c @@ -48,13 +48,13 @@ * ioctl_send_fib - send a FIB from userspace * @dev: adapter is being processed * @arg: arguments to the ioctl call - * + * * This routine sends a fib to the adapter on behalf of a user level * program. */ # define AAC_DEBUG_PREAMBLE KERN_INFO # define AAC_DEBUG_POSTAMBLE - + static int ioctl_send_fib(struct aac_dev * dev, void __user *arg) { struct hw_fib * kfib; @@ -71,7 +71,7 @@ static int ioctl_send_fib(struct aac_dev * dev, void __user *arg) if(fibptr == NULL) { return -ENOMEM; } - + kfib = fibptr->hw_fib_va; /* * First copy in the header so that we can check the size field. @@ -109,7 +109,7 @@ static int ioctl_send_fib(struct aac_dev * dev, void __user *arg) if (kfib->header.Command == cpu_to_le16(TakeABreakPt)) { aac_adapter_interrupt(dev); /* - * Since we didn't really send a fib, zero out the state to allow + * Since we didn't really send a fib, zero out the state to allow * cleanup code not to assert. */ kfib->header.XferState = 0; @@ -169,7 +169,7 @@ static int open_getadapter_fib(struct aac_dev * dev, void __user *arg) fibctx->type = FSAFS_NTC_GET_ADAPTER_FIB_CONTEXT; fibctx->size = sizeof(struct aac_fib_context); - /* + /* * Yes yes, I know this could be an index, but we have a * better guarantee of uniqueness for the locked loop below. * Without the aid of a persistent history, this also helps @@ -189,7 +189,7 @@ static int open_getadapter_fib(struct aac_dev * dev, void __user *arg) INIT_LIST_HEAD(&fibctx->fib_list); fibctx->jiffies = jiffies/HZ; /* - * Now add this context onto the adapter's + * Now add this context onto the adapter's * AdapterFibContext list. */ spin_lock_irqsave(&dev->fib_lock, flags); @@ -207,12 +207,12 @@ static int open_getadapter_fib(struct aac_dev * dev, void __user *arg) } list_add_tail(&fibctx->next, &dev->fib_list); spin_unlock_irqrestore(&dev->fib_lock, flags); - if (copy_to_user(arg, &fibctx->unique, + if (copy_to_user(arg, &fibctx->unique, sizeof(fibctx->unique))) { status = -EFAULT; } else { status = 0; - } + } } return status; } @@ -221,8 +221,8 @@ static int open_getadapter_fib(struct aac_dev * dev, void __user *arg) * next_getadapter_fib - get the next fib * @dev: adapter to use * @arg: ioctl argument - * - * This routine will get the next Fib, if available, from the AdapterFibContext + * + * This routine will get the next Fib, if available, from the AdapterFibContext * passed in from the user. */ @@ -234,7 +234,7 @@ static int next_getadapter_fib(struct aac_dev * dev, void __user *arg) int status; struct list_head * entry; unsigned long flags; - + if(copy_from_user((void *)&f, arg, sizeof(struct fib_ioctl))) return -EFAULT; /* @@ -280,7 +280,7 @@ return_fib: */ entry = fibctx->fib_list.next; list_del(entry); - + fib = list_entry(entry, struct fib, fiblink); fibctx->count--; spin_unlock_irqrestore(&dev->fib_lock, flags); @@ -288,7 +288,7 @@ return_fib: kfree(fib->hw_fib_va); kfree(fib); return -EFAULT; - } + } /* * Free the space occupied by this copy of the fib. */ @@ -317,7 +317,7 @@ return_fib: } } else { status = -EAGAIN; - } + } } fibctx->jiffies = jiffies/HZ; return status; @@ -367,7 +367,7 @@ int aac_close_fib_context(struct aac_dev * dev, struct aac_fib_context * fibctx) * * This routine will close down the fibctx passed in from the user. */ - + static int close_getadapter_fib(struct aac_dev * dev, void __user *arg) { struct aac_fib_context *fibctx; @@ -414,7 +414,7 @@ static int close_getadapter_fib(struct aac_dev * dev, void __user *arg) * @arg: ioctl arguments * * This routine returns the driver version. - * Under Linux, there have been no version incompatibilities, so this is + * Under Linux, there have been no version incompatibilities, so this is * simple! */ @@ -425,12 +425,12 @@ static int check_revision(struct aac_dev *dev, void __user *arg) u32 version; response.compat = 1; - version = (simple_strtol(driver_version, + version = (simple_strtol(driver_version, &driver_version, 10) << 24) | 0x00000400; version += simple_strtol(driver_version + 1, &driver_version, 10) << 16; version += simple_strtol(driver_version + 1, NULL, 10); response.version = cpu_to_le32(version); -# if (defined(AAC_DRIVER_BUILD)) +# ifdef AAC_DRIVER_BUILD response.build = cpu_to_le32(AAC_DRIVER_BUILD); # else response.build = cpu_to_le32(9999); @@ -474,7 +474,7 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) return -EBUSY; } if (!capable(CAP_SYS_ADMIN)){ - dprintk((KERN_DEBUG"aacraid: No permission to send raw srb\n")); + dprintk((KERN_DEBUG"aacraid: No permission to send raw srb\n")); return -EPERM; } /* @@ -489,7 +489,7 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) memset(sg_list, 0, sizeof(sg_list)); /* cleanup may take issue */ if(copy_from_user(&fibsize, &user_srb->count,sizeof(u32))){ - dprintk((KERN_DEBUG"aacraid: Could not copy data size from user\n")); + dprintk((KERN_DEBUG"aacraid: Could not copy data size from user\n")); rcode = -EFAULT; goto cleanup; } @@ -506,7 +506,7 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) goto cleanup; } if(copy_from_user(user_srbcmd, user_srb,fibsize)){ - dprintk((KERN_DEBUG"aacraid: Could not copy srb from user\n")); + dprintk((KERN_DEBUG"aacraid: Could not copy srb from user\n")); rcode = -EFAULT; goto cleanup; } @@ -525,7 +525,7 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) srbcmd->retry_limit = 0; // Obsolete parameter srbcmd->cdb_size = cpu_to_le32(user_srbcmd->cdb_size); memcpy(srbcmd->cdb, user_srbcmd->cdb, sizeof(srbcmd->cdb)); - + switch (flags & (SRB_DataIn | SRB_DataOut)) { case SRB_DataOut: data_dir = DMA_TO_DEVICE; @@ -593,7 +593,7 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) sg_list[i] = p; // save so we can clean up later sg_indx = i; - if( flags & SRB_DataOut ){ + if (flags & SRB_DataOut) { if(copy_from_user(p,sg_user[i],upsg->sg[i].count)){ dprintk((KERN_DEBUG"aacraid: Could not copy sg data from user\n")); rcode = -EFAULT; @@ -636,7 +636,7 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) sg_list[i] = p; // save so we can clean up later sg_indx = i; - if( flags & SRB_DataOut ){ + if (flags & SRB_DataOut) { if(copy_from_user(p,sg_user[i],upsg->sg[i].count)){ kfree (usg); dprintk((KERN_DEBUG"aacraid: Could not copy sg data from user\n")); @@ -679,7 +679,7 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) sg_list[i] = p; // save so we can clean up later sg_indx = i; - if( flags & SRB_DataOut ){ + if (flags & SRB_DataOut) { if(copy_from_user(p,sg_user[i],usg->sg[i].count)){ dprintk((KERN_DEBUG"aacraid: Could not copy sg data from user\n")); rcode = -EFAULT; @@ -707,7 +707,7 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) sg_list[i] = p; // save so we can clean up later sg_indx = i; - if( flags & SRB_DataOut ){ + if (flags & SRB_DataOut) { if(copy_from_user(p, sg_user[i], upsg->sg[i].count)) { dprintk((KERN_DEBUG"aacraid: Could not copy sg data from user\n")); @@ -733,19 +733,19 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) } if (status != 0){ - dprintk((KERN_DEBUG"aacraid: Could not send raw srb fib to hba\n")); + dprintk((KERN_DEBUG"aacraid: Could not send raw srb fib to hba\n")); rcode = -ENXIO; goto cleanup; } - if( flags & SRB_DataIn ) { + if (flags & SRB_DataIn) { for(i = 0 ; i <= sg_indx; i++){ byte_count = le32_to_cpu( (dev->adapter_info.options & AAC_OPT_SGMAP_HOST64) ? ((struct sgmap64*)&srbcmd->sg)->sg[i].count : srbcmd->sg.sg[i].count); if(copy_to_user(sg_user[i], sg_list[i], byte_count)){ - dprintk((KERN_DEBUG"aacraid: Could not copy sg data to user\n")); + dprintk((KERN_DEBUG"aacraid: Could not copy sg data to user\n")); rcode = -EFAULT; goto cleanup; @@ -755,7 +755,7 @@ static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg) reply = (struct aac_srb_reply *) fib_data(srbfib); if(copy_to_user(user_reply,reply,sizeof(struct aac_srb_reply))){ - dprintk((KERN_DEBUG"aacraid: Could not copy reply to user\n")); + dprintk((KERN_DEBUG"aacraid: Could not copy reply to user\n")); rcode = -EFAULT; goto cleanup; } @@ -774,34 +774,34 @@ cleanup: } struct aac_pci_info { - u32 bus; - u32 slot; + u32 bus; + u32 slot; }; static int aac_get_pci_info(struct aac_dev* dev, void __user *arg) { - struct aac_pci_info pci_info; + struct aac_pci_info pci_info; pci_info.bus = dev->pdev->bus->number; pci_info.slot = PCI_SLOT(dev->pdev->devfn); if (copy_to_user(arg, &pci_info, sizeof(struct aac_pci_info))) { - dprintk((KERN_DEBUG "aacraid: Could not copy pci info\n")); - return -EFAULT; + dprintk((KERN_DEBUG "aacraid: Could not copy pci info\n")); + return -EFAULT; } - return 0; + return 0; } - + int aac_do_ioctl(struct aac_dev * dev, int cmd, void __user *arg) { int status; - + /* * HBA gets first crack */ - + status = aac_dev_ioctl(dev, cmd, arg); if(status != -ENOTTY) return status; @@ -831,7 +831,7 @@ int aac_do_ioctl(struct aac_dev * dev, int cmd, void __user *arg) break; default: status = -ENOTTY; - break; + break; } return status; } diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index 6d88f30296e1..1dd2e57c3345 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -56,7 +56,7 @@ * Allocate and map the shared PCI space for the FIB blocks used to * talk to the Adaptec firmware. */ - + static int fib_map_alloc(struct aac_dev *dev) { dprintk((KERN_INFO @@ -109,14 +109,16 @@ int aac_fib_setup(struct aac_dev * dev) } if (i<0) return -ENOMEM; - + hw_fib = dev->hw_fib_va; hw_fib_pa = dev->hw_fib_pa; memset(hw_fib, 0, dev->max_fib_size * (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB)); /* * Initialise the fibs */ - for (i = 0, fibptr = &dev->fibs[i]; i < (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB); i++, fibptr++) + for (i = 0, fibptr = &dev->fibs[i]; + i < (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB); + i++, fibptr++) { fibptr->dev = dev; fibptr->hw_fib_va = hw_fib; @@ -148,13 +150,13 @@ int aac_fib_setup(struct aac_dev * dev) * Allocate a fib from the adapter fib pool. If the pool is empty we * return NULL. */ - + struct fib *aac_fib_alloc(struct aac_dev *dev) { struct fib * fibptr; unsigned long flags; spin_lock_irqsave(&dev->fib_lock, flags); - fibptr = dev->free_fib; + fibptr = dev->free_fib; if(!fibptr){ spin_unlock_irqrestore(&dev->fib_lock, flags); return fibptr; @@ -184,7 +186,7 @@ struct fib *aac_fib_alloc(struct aac_dev *dev) * * Frees up a fib and places it on the appropriate queue */ - + void aac_fib_free(struct fib *fibptr) { unsigned long flags; @@ -205,10 +207,10 @@ void aac_fib_free(struct fib *fibptr) /** * aac_fib_init - initialise a fib * @fibptr: The fib to initialize - * + * * Set up the generic fib fields ready for use */ - + void aac_fib_init(struct fib *fibptr) { struct hw_fib *hw_fib = fibptr->hw_fib_va; @@ -228,12 +230,12 @@ void aac_fib_init(struct fib *fibptr) * Will deallocate and return to the free pool the FIB pointed to by the * caller. */ - + static void fib_dealloc(struct fib * fibptr) { struct hw_fib *hw_fib = fibptr->hw_fib_va; BUG_ON(hw_fib->header.StructType != FIB_MAGIC); - hw_fib->header.XferState = 0; + hw_fib->header.XferState = 0; } /* @@ -242,7 +244,7 @@ static void fib_dealloc(struct fib * fibptr) * these routines and are the only routines which have a knowledge of the * how these queues are implemented. */ - + /** * aac_get_entry - get a queue entry * @dev: Adapter @@ -255,7 +257,7 @@ static void fib_dealloc(struct fib * fibptr) * is full(no free entries) than no entry is returned and the function returns 0 otherwise 1 is * returned. */ - + static int aac_get_entry (struct aac_dev * dev, u32 qid, struct aac_entry **entry, u32 * index, unsigned long *nonotify) { struct aac_queue * q; @@ -280,26 +282,27 @@ static int aac_get_entry (struct aac_dev * dev, u32 qid, struct aac_entry **entr idx = ADAP_NORM_RESP_ENTRIES; } if (idx != le32_to_cpu(*(q->headers.consumer))) - *nonotify = 1; + *nonotify = 1; } if (qid == AdapNormCmdQueue) { - if (*index >= ADAP_NORM_CMD_ENTRIES) + if (*index >= ADAP_NORM_CMD_ENTRIES) *index = 0; /* Wrap to front of the Producer Queue. */ } else { - if (*index >= ADAP_NORM_RESP_ENTRIES) + if (*index >= ADAP_NORM_RESP_ENTRIES) *index = 0; /* Wrap to front of the Producer Queue. */ } - if ((*index + 1) == le32_to_cpu(*(q->headers.consumer))) { /* Queue is full */ + /* Queue is full */ + if ((*index + 1) == le32_to_cpu(*(q->headers.consumer))) { printk(KERN_WARNING "Queue %d full, %u outstanding.\n", qid, q->numpending); return 0; } else { - *entry = q->base + *index; + *entry = q->base + *index; return 1; } -} +} /** * aac_queue_get - get the next free QE @@ -321,31 +324,29 @@ int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_fib * hw { struct aac_entry * entry = NULL; int map = 0; - + if (qid == AdapNormCmdQueue) { /* if no entries wait for some if caller wants to */ - while (!aac_get_entry(dev, qid, &entry, index, nonotify)) - { + while (!aac_get_entry(dev, qid, &entry, index, nonotify)) { printk(KERN_ERR "GetEntries failed\n"); } - /* - * Setup queue entry with a command, status and fib mapped - */ - entry->size = cpu_to_le32(le16_to_cpu(hw_fib->header.Size)); - map = 1; + /* + * Setup queue entry with a command, status and fib mapped + */ + entry->size = cpu_to_le32(le16_to_cpu(hw_fib->header.Size)); + map = 1; } else { - while(!aac_get_entry(dev, qid, &entry, index, nonotify)) - { + while (!aac_get_entry(dev, qid, &entry, index, nonotify)) { /* if no entries wait for some if caller wants to */ } - /* - * Setup queue entry with command, status and fib mapped - */ - entry->size = cpu_to_le32(le16_to_cpu(hw_fib->header.Size)); - entry->addr = hw_fib->header.SenderFibAddress; - /* Restore adapters pointer to the FIB */ + /* + * Setup queue entry with command, status and fib mapped + */ + entry->size = cpu_to_le32(le16_to_cpu(hw_fib->header.Size)); + entry->addr = hw_fib->header.SenderFibAddress; + /* Restore adapters pointer to the FIB */ hw_fib->header.ReceiverFibAddress = hw_fib->header.SenderFibAddress; /* Let the adapter now where to find its data */ - map = 0; + map = 0; } /* * If MapFib is true than we need to map the Fib and put pointers @@ -357,8 +358,8 @@ int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_fib * hw } /* - * Define the highest level of host to adapter communication routines. - * These routines will support host to adapter FS commuication. These + * Define the highest level of host to adapter communication routines. + * These routines will support host to adapter FS commuication. These * routines have no knowledge of the commuication method used. This level * sends and receives FIBs. This level has no knowledge of how these FIBs * get passed back and forth. @@ -380,7 +381,7 @@ int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_fib * hw * an event to wait on must be supplied. This event will be set when a * response FIB is received from the adapter. */ - + int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size, int priority, int wait, int reply, fib_callback callback, void *callback_data) @@ -393,13 +394,13 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size, if (!(hw_fib->header.XferState & cpu_to_le32(HostOwned))) return -EBUSY; /* - * There are 5 cases with the wait and reponse requested flags. + * There are 5 cases with the wait and reponse requested flags. * The only invalid cases are if the caller requests to wait and * does not request a response and if the caller does not want a * response and the Fib is not allocated from pool. If a response * is not requesed the Fib will just be deallocaed by the DPC * routine when the response comes back from the adapter. No - * further processing will be done besides deleting the Fib. We + * further processing will be done besides deleting the Fib. We * will have a debug mode where the adapter can notify the host * it had a problem and the host can log that fact. */ @@ -415,7 +416,7 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size, } else if (wait && reply) { hw_fib->header.XferState |= cpu_to_le32(ResponseExpected); FIB_COUNTER_INCREMENT(aac_config.NormalSent); - } + } /* * Map the fib into 32bits by using the fib number */ @@ -438,7 +439,7 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size, hw_fib->header.Size = cpu_to_le16(sizeof(struct aac_fibhdr) + size); if (le16_to_cpu(hw_fib->header.Size) > le16_to_cpu(hw_fib->header.SenderSize)) { return -EMSGSIZE; - } + } /* * Get a queue entry connect the FIB to it and send an notify * the adapter a command is ready. @@ -475,9 +476,9 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size, aac_adapter_deliver(fibptr); /* - * If the caller wanted us to wait for response wait now. + * If the caller wanted us to wait for response wait now. */ - + if (wait) { spin_unlock_irqrestore(&fibptr->event_lock, flags); /* Only set for first known interruptable command */ @@ -524,7 +525,7 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size, } spin_unlock_irqrestore(&fibptr->event_lock, flags); BUG_ON(fibptr->done == 0); - + if(unlikely(fibptr->flags & FIB_CONTEXT_FLAG_TIMED_OUT)) return -ETIMEDOUT; return 0; @@ -539,15 +540,15 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size, return 0; } -/** +/** * aac_consumer_get - get the top of the queue * @dev: Adapter * @q: Queue * @entry: Return entry * * Will return a pointer to the entry on the top of the queue requested that - * we are a consumer of, and return the address of the queue entry. It does - * not change the state of the queue. + * we are a consumer of, and return the address of the queue entry. It does + * not change the state of the queue. */ int aac_consumer_get(struct aac_dev * dev, struct aac_queue * q, struct aac_entry **entry) @@ -562,10 +563,10 @@ int aac_consumer_get(struct aac_dev * dev, struct aac_queue * q, struct aac_entr * the end of the queue, else we just use the entry * pointed to by the header index */ - if (le32_to_cpu(*q->headers.consumer) >= q->entries) - index = 0; + if (le32_to_cpu(*q->headers.consumer) >= q->entries) + index = 0; else - index = le32_to_cpu(*q->headers.consumer); + index = le32_to_cpu(*q->headers.consumer); *entry = q->base + index; status = 1; } @@ -589,12 +590,12 @@ void aac_consumer_free(struct aac_dev * dev, struct aac_queue *q, u32 qid) if ((le32_to_cpu(*q->headers.producer)+1) == le32_to_cpu(*q->headers.consumer)) wasfull = 1; - + if (le32_to_cpu(*q->headers.consumer) >= q->entries) *q->headers.consumer = cpu_to_le32(1); else *q->headers.consumer = cpu_to_le32(le32_to_cpu(*q->headers.consumer)+1); - + if (wasfull) { switch (qid) { @@ -610,7 +611,7 @@ void aac_consumer_free(struct aac_dev * dev, struct aac_queue *q, u32 qid) } aac_adapter_notify(dev, notify); } -} +} /** * aac_fib_adapter_complete - complete adapter issued fib @@ -632,32 +633,32 @@ int aac_fib_adapter_complete(struct fib *fibptr, unsigned short size) if (hw_fib->header.XferState == 0) { if (dev->comm_interface == AAC_COMM_MESSAGE) kfree (hw_fib); - return 0; + return 0; } /* * If we plan to do anything check the structure type first. - */ - if ( hw_fib->header.StructType != FIB_MAGIC ) { + */ + if (hw_fib->header.StructType != FIB_MAGIC) { if (dev->comm_interface == AAC_COMM_MESSAGE) kfree (hw_fib); - return -EINVAL; + return -EINVAL; } /* * This block handles the case where the adapter had sent us a * command and we have finished processing the command. We - * call completeFib when we are done processing the command - * and want to send a response back to the adapter. This will + * call completeFib when we are done processing the command + * and want to send a response back to the adapter. This will * send the completed cdb to the adapter. */ if (hw_fib->header.XferState & cpu_to_le32(SentFromAdapter)) { if (dev->comm_interface == AAC_COMM_MESSAGE) { kfree (hw_fib); } else { - u32 index; - hw_fib->header.XferState |= cpu_to_le32(HostProcessed); + u32 index; + hw_fib->header.XferState |= cpu_to_le32(HostProcessed); if (size) { size += sizeof(struct aac_fibhdr); - if (size > le16_to_cpu(hw_fib->header.SenderSize)) + if (size > le16_to_cpu(hw_fib->header.SenderSize)) return -EMSGSIZE; hw_fib->header.Size = cpu_to_le16(size); } @@ -669,12 +670,11 @@ int aac_fib_adapter_complete(struct fib *fibptr, unsigned short size) if (!(nointr & (int)aac_config.irq_mod)) aac_adapter_notify(dev, AdapNormRespQueue); } + } else { + printk(KERN_WARNING "aac_fib_adapter_complete: " + "Unknown xferstate detected.\n"); + BUG(); } - else - { - printk(KERN_WARNING "aac_fib_adapter_complete: Unknown xferstate detected.\n"); - BUG(); - } return 0; } @@ -684,7 +684,7 @@ int aac_fib_adapter_complete(struct fib *fibptr, unsigned short size) * * Will do all necessary work to complete a FIB. */ - + int aac_fib_complete(struct fib *fibptr) { struct hw_fib * hw_fib = fibptr->hw_fib_va; @@ -694,15 +694,15 @@ int aac_fib_complete(struct fib *fibptr) */ if (hw_fib->header.XferState == 0) - return 0; + return 0; /* * If we plan to do anything check the structure type first. - */ + */ if (hw_fib->header.StructType != FIB_MAGIC) - return -EINVAL; + return -EINVAL; /* - * This block completes a cdb which orginated on the host and we + * This block completes a cdb which orginated on the host and we * just need to deallocate the cdb or reinit it. At this point the * command is complete that we had sent to the adapter and this * cdb could be reused. @@ -723,7 +723,7 @@ int aac_fib_complete(struct fib *fibptr) fib_dealloc(fibptr); } else { BUG(); - } + } return 0; } @@ -743,7 +743,7 @@ void aac_printf(struct aac_dev *dev, u32 val) { int length = val & 0xffff; int level = (val >> 16) & 0xffff; - + /* * The size of the printfbuf is set in port.c * There is no variable or define for it @@ -757,7 +757,7 @@ void aac_printf(struct aac_dev *dev, u32 val) else printk(KERN_INFO "%s:%s", dev->name, cp); } - memset(cp, 0, 256); + memset(cp, 0, 256); } @@ -816,9 +816,9 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr) */ if ((dev != NULL) && (dev->scsi_host_ptr != NULL)) { - device = scsi_device_lookup(dev->scsi_host_ptr, - CONTAINER_TO_CHANNEL(container), - CONTAINER_TO_ID(container), + device = scsi_device_lookup(dev->scsi_host_ptr, + CONTAINER_TO_CHANNEL(container), + CONTAINER_TO_ID(container), CONTAINER_TO_LUN(container)); if (device) { dev->fsa_dev[container].config_needed = CHANGE; @@ -1184,13 +1184,13 @@ static int _aac_reset_adapter(struct aac_dev *aac, int forced) } (void)aac_get_adapter_info(aac); if ((quirks & AAC_QUIRK_34SG) && (host->sg_tablesize > 34)) { - host->sg_tablesize = 34; - host->max_sectors = (host->sg_tablesize * 8) + 112; - } - if ((quirks & AAC_QUIRK_17SG) && (host->sg_tablesize > 17)) { - host->sg_tablesize = 17; - host->max_sectors = (host->sg_tablesize * 8) + 112; - } + host->sg_tablesize = 34; + host->max_sectors = (host->sg_tablesize * 8) + 112; + } + if ((quirks & AAC_QUIRK_17SG) && (host->sg_tablesize > 17)) { + host->sg_tablesize = 17; + host->max_sectors = (host->sg_tablesize * 8) + 112; + } aac_get_config_status(aac, 1); aac_get_containers(aac); /* @@ -1461,7 +1461,7 @@ out: * until the queue is empty. When the queue is empty it will wait for * more FIBs. */ - + int aac_command_thread(void *data) { struct aac_dev *dev = data; @@ -1487,30 +1487,29 @@ int aac_command_thread(void *data) add_wait_queue(&dev->queues->queue[HostNormCmdQueue].cmdready, &wait); set_current_state(TASK_INTERRUPTIBLE); dprintk ((KERN_INFO "aac_command_thread start\n")); - while(1) - { + while (1) { spin_lock_irqsave(dev->queues->queue[HostNormCmdQueue].lock, flags); while(!list_empty(&(dev->queues->queue[HostNormCmdQueue].cmdq))) { struct list_head *entry; struct aac_aifcmd * aifcmd; set_current_state(TASK_RUNNING); - + entry = dev->queues->queue[HostNormCmdQueue].cmdq.next; list_del(entry); - + spin_unlock_irqrestore(dev->queues->queue[HostNormCmdQueue].lock, flags); fib = list_entry(entry, struct fib, fiblink); /* - * We will process the FIB here or pass it to a - * worker thread that is TBD. We Really can't + * We will process the FIB here or pass it to a + * worker thread that is TBD. We Really can't * do anything at this point since we don't have * anything defined for this thread to do. */ hw_fib = fib->hw_fib_va; memset(fib, 0, sizeof(struct fib)); fib->type = FSAFS_NTC_FIB_CONTEXT; - fib->size = sizeof( struct fib ); + fib->size = sizeof(struct fib); fib->hw_fib_va = hw_fib; fib->data = hw_fib->data; fib->dev = dev; @@ -1526,17 +1525,17 @@ int aac_command_thread(void *data) } else { /* The u32 here is important and intended. We are using 32bit wrapping time to fit the adapter field */ - + u32 time_now, time_last; unsigned long flagv; unsigned num; struct hw_fib ** hw_fib_pool, ** hw_fib_p; struct fib ** fib_pool, ** fib_p; - + /* Sniff events */ - if ((aifcmd->command == + if ((aifcmd->command == cpu_to_le32(AifCmdEventNotify)) || - (aifcmd->command == + (aifcmd->command == cpu_to_le32(AifCmdJobProgress))) { aac_handle_aif(dev, fib); } @@ -1588,7 +1587,7 @@ int aac_command_thread(void *data) spin_lock_irqsave(&dev->fib_lock, flagv); entry = dev->fib_list.next; /* - * For each Context that is on the + * For each Context that is on the * fibctxList, make a copy of the * fib, and then set the event to wake up the * thread that is waiting for it. @@ -1613,7 +1612,7 @@ int aac_command_thread(void *data) */ time_last = fibctx->jiffies; /* - * Has it been > 2 minutes + * Has it been > 2 minutes * since the last read off * the queue? */ @@ -1644,7 +1643,7 @@ int aac_command_thread(void *data) */ list_add_tail(&newfib->fiblink, &fibctx->fib_list); fibctx->count++; - /* + /* * Set the event to wake up the * thread that is waiting. */ diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 143e4c16b079..6650f6fa9890 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -159,7 +159,7 @@ static struct pci_device_id aac_pci_tbl[] = { MODULE_DEVICE_TABLE(pci, aac_pci_tbl); /* - * dmb - For now we add the number of channels to this structure. + * dmb - For now we add the number of channels to this structure. * In the future we should add a fib that reports the number of channels * for the card. At that time we can remove the channels from here */ @@ -239,7 +239,7 @@ static struct aac_driver_ident aac_drivers[] = { * Queues a command for execution by the associated Host Adapter. * * TODO: unify with aac_scsi_cmd(). - */ + */ static int aac_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) { @@ -258,7 +258,7 @@ static int aac_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd } cmd->SCp.phase = AAC_OWNER_LOWLEVEL; return (aac_scsi_cmd(cmd) ? FAILED : 0); -} +} /** * aac_info - Returns the host adapter name @@ -292,21 +292,21 @@ struct aac_driver_ident* aac_get_driver_ident(int devtype) * @capacity: the sector capacity of the disk * @geom: geometry block to fill in * - * Return the Heads/Sectors/Cylinders BIOS Disk Parameters for Disk. - * The default disk geometry is 64 heads, 32 sectors, and the appropriate - * number of cylinders so as not to exceed drive capacity. In order for + * Return the Heads/Sectors/Cylinders BIOS Disk Parameters for Disk. + * The default disk geometry is 64 heads, 32 sectors, and the appropriate + * number of cylinders so as not to exceed drive capacity. In order for * disks equal to or larger than 1 GB to be addressable by the BIOS - * without exceeding the BIOS limitation of 1024 cylinders, Extended - * Translation should be enabled. With Extended Translation enabled, - * drives between 1 GB inclusive and 2 GB exclusive are given a disk - * geometry of 128 heads and 32 sectors, and drives above 2 GB inclusive - * are given a disk geometry of 255 heads and 63 sectors. However, if - * the BIOS detects that the Extended Translation setting does not match - * the geometry in the partition table, then the translation inferred - * from the partition table will be used by the BIOS, and a warning may + * without exceeding the BIOS limitation of 1024 cylinders, Extended + * Translation should be enabled. With Extended Translation enabled, + * drives between 1 GB inclusive and 2 GB exclusive are given a disk + * geometry of 128 heads and 32 sectors, and drives above 2 GB inclusive + * are given a disk geometry of 255 heads and 63 sectors. However, if + * the BIOS detects that the Extended Translation setting does not match + * the geometry in the partition table, then the translation inferred + * from the partition table will be used by the BIOS, and a warning may * be displayed. */ - + static int aac_biosparm(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int *geom) { @@ -333,10 +333,10 @@ static int aac_biosparm(struct scsi_device *sdev, struct block_device *bdev, param->cylinders = cap_to_cyls(capacity, param->heads * param->sectors); - /* + /* * Read the first 1024 bytes from the disk device, if the boot * sector partition table is valid, search for a partition table - * entry whose end_head matches one of the standard geometry + * entry whose end_head matches one of the standard geometry * translations ( 64/32, 128/32, 255/63 ). */ buf = scsi_bios_ptable(bdev); @@ -596,7 +596,7 @@ static int aac_eh_reset(struct scsi_cmnd* cmd) cmd->SCp.phase = AAC_OWNER_ERROR_HANDLER; } } - printk(KERN_ERR "%s: Host adapter reset request. SCSI hang ?\n", + printk(KERN_ERR "%s: Host adapter reset request. SCSI hang ?\n", AAC_DRIVERNAME); if ((count = aac_check_health(aac))) @@ -687,8 +687,8 @@ static int aac_cfg_open(struct inode *inode, struct file *file) * Bugs: Needs locking against parallel ioctls lower down * Bugs: Needs to handle hot plugging */ - -static int aac_cfg_ioctl(struct inode *inode, struct file *file, + +static int aac_cfg_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { if (!capable(CAP_SYS_RAWIO)) @@ -701,7 +701,7 @@ static long aac_compat_do_ioctl(struct aac_dev *dev, unsigned cmd, unsigned long { long ret; lock_kernel(); - switch (cmd) { + switch (cmd) { case FSACTL_MINIPORT_REV_CHECK: case FSACTL_SENDFIB: case FSACTL_OPEN_GET_ADAPTER_FIB: @@ -711,14 +711,14 @@ static long aac_compat_do_ioctl(struct aac_dev *dev, unsigned cmd, unsigned long case FSACTL_QUERY_DISK: case FSACTL_DELETE_DISK: case FSACTL_FORCE_DELETE_DISK: - case FSACTL_GET_CONTAINERS: + case FSACTL_GET_CONTAINERS: case FSACTL_SEND_LARGE_FIB: ret = aac_do_ioctl(dev, cmd, (void __user *)arg); break; case FSACTL_GET_NEXT_ADAPTER_FIB: { struct fib_ioctl __user *f; - + f = compat_alloc_user_space(sizeof(*f)); ret = 0; if (clear_user(f, sizeof(*f))) @@ -731,9 +731,9 @@ static long aac_compat_do_ioctl(struct aac_dev *dev, unsigned cmd, unsigned long } default: - ret = -ENOIOCTLCMD; + ret = -ENOIOCTLCMD; break; - } + } unlock_kernel(); return ret; } @@ -797,7 +797,7 @@ static ssize_t aac_show_kernel_version(struct class_device *class_dev, int len, tmp; tmp = le32_to_cpu(dev->adapter_info.kernelrev); - len = snprintf(buf, PAGE_SIZE, "%d.%d-%d[%d]\n", + len = snprintf(buf, PAGE_SIZE, "%d.%d-%d[%d]\n", tmp >> 24, (tmp >> 16) & 0xff, tmp & 0xff, le32_to_cpu(dev->adapter_info.kernelbuild)); return len; @@ -810,7 +810,7 @@ static ssize_t aac_show_monitor_version(struct class_device *class_dev, int len, tmp; tmp = le32_to_cpu(dev->adapter_info.monitorrev); - len = snprintf(buf, PAGE_SIZE, "%d.%d-%d[%d]\n", + len = snprintf(buf, PAGE_SIZE, "%d.%d-%d[%d]\n", tmp >> 24, (tmp >> 16) & 0xff, tmp & 0xff, le32_to_cpu(dev->adapter_info.monitorbuild)); return len; @@ -823,7 +823,7 @@ static ssize_t aac_show_bios_version(struct class_device *class_dev, int len, tmp; tmp = le32_to_cpu(dev->adapter_info.biosrev); - len = snprintf(buf, PAGE_SIZE, "%d.%d-%d[%d]\n", + len = snprintf(buf, PAGE_SIZE, "%d.%d-%d[%d]\n", tmp >> 24, (tmp >> 16) & 0xff, tmp & 0xff, le32_to_cpu(dev->adapter_info.biosbuild)); return len; @@ -983,22 +983,22 @@ static struct scsi_host_template aac_driver_template = { .compat_ioctl = aac_compat_ioctl, #endif .queuecommand = aac_queuecommand, - .bios_param = aac_biosparm, + .bios_param = aac_biosparm, .shost_attrs = aac_attrs, .slave_configure = aac_slave_configure, .change_queue_depth = aac_change_queue_depth, .sdev_attrs = aac_dev_attrs, .eh_abort_handler = aac_eh_abort, .eh_host_reset_handler = aac_eh_reset, - .can_queue = AAC_NUM_IO_FIB, + .can_queue = AAC_NUM_IO_FIB, .this_id = MAXIMUM_NUM_CONTAINERS, .sg_tablesize = 16, .max_sectors = 128, #if (AAC_NUM_IO_FIB > 256) .cmd_per_lun = 256, -#else - .cmd_per_lun = AAC_NUM_IO_FIB, -#endif +#else + .cmd_per_lun = AAC_NUM_IO_FIB, +#endif .use_clustering = ENABLE_CLUSTERING, .use_sg_chaining = ENABLE_SG_CHAINING, .emulated = 1, @@ -1035,18 +1035,18 @@ static int __devinit aac_probe_one(struct pci_dev *pdev, goto out; error = -ENODEV; - if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) || + if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) || pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) goto out_disable_pdev; /* * If the quirk31 bit is set, the adapter needs adapter * to driver communication memory to be allocated below 2gig */ - if (aac_drivers[index].quirks & AAC_QUIRK_31BIT) + if (aac_drivers[index].quirks & AAC_QUIRK_31BIT) if (pci_set_dma_mask(pdev, DMA_31BIT_MASK) || pci_set_consistent_dma_mask(pdev, DMA_31BIT_MASK)) goto out_disable_pdev; - + pci_set_master(pdev); shost = scsi_host_alloc(&aac_driver_template, sizeof(struct aac_dev)); @@ -1059,7 +1059,7 @@ static int __devinit aac_probe_one(struct pci_dev *pdev, shost->max_cmd_len = 16; aac = (struct aac_dev *)shost->hostdata; - aac->scsi_host_ptr = shost; + aac->scsi_host_ptr = shost; aac->pdev = pdev; aac->name = aac_driver_template.name; aac->id = shost->unique_id; @@ -1096,7 +1096,7 @@ static int __devinit aac_probe_one(struct pci_dev *pdev, if (aac_drivers[index].quirks & AAC_QUIRK_31BIT) if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) goto out_deinit; - + aac->maximum_num_channels = aac_drivers[index].channels; error = aac_get_adapter_info(aac); if (error < 0) @@ -1105,7 +1105,7 @@ static int __devinit aac_probe_one(struct pci_dev *pdev, /* * Lets override negotiations and drop the maximum SG limit to 34 */ - if ((aac_drivers[index].quirks & AAC_QUIRK_34SG) && + if ((aac_drivers[index].quirks & AAC_QUIRK_34SG) && (aac->scsi_host_ptr->sg_tablesize > 34)) { aac->scsi_host_ptr->sg_tablesize = 34; aac->scsi_host_ptr->max_sectors @@ -1122,11 +1122,11 @@ static int __devinit aac_probe_one(struct pci_dev *pdev, /* * Firware printf works only with older firmware. */ - if (aac_drivers[index].quirks & AAC_QUIRK_34SG) + if (aac_drivers[index].quirks & AAC_QUIRK_34SG) aac->printf_enabled = 1; else aac->printf_enabled = 0; - + /* * max channel will be the physical channels plus 1 virtual channel * all containers are on the virtual channel 0 (CONTAINER_CHANNEL) @@ -1204,10 +1204,10 @@ static void __devexit aac_remove_one(struct pci_dev *pdev) kfree(aac->queues); aac_adapter_ioremap(aac, 0); - + kfree(aac->fibs); kfree(aac->fsa_dev); - + list_del(&aac->entry); scsi_host_put(shost); pci_disable_device(pdev); @@ -1228,7 +1228,7 @@ static struct pci_driver aac_pci_driver = { static int __init aac_init(void) { int error; - + printk(KERN_INFO "Adaptec %s driver %s\n", AAC_DRIVERNAME, aac_driver_version); -- cgit v1.2.3-59-g8ed1b From fd66c1b4e491a2a17d7a420fa38fd04b0e8d36c1 Mon Sep 17 00:00:00 2001 From: Kai Makisara Date: Thu, 17 Jan 2008 22:45:22 +0200 Subject: [SCSI] st: convert to unlocked_ioctl Convert st to unlocked_ioctl. The necessary locking was already in place. Signed-off-by: Kai Makisara Signed-off-by: James Bottomley --- drivers/scsi/st.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 328c47c6aeb1..71952703125a 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -9,7 +9,7 @@ Steve Hirsch, Andreas Koppenh"ofer, Michael Leodolter, Eyal Lebedinsky, Michael Schaefer, J"org Weule, and Eric Youngdale. - Copyright 1992 - 2007 Kai Makisara + Copyright 1992 - 2008 Kai Makisara email Kai.Makisara@kolumbus.fi Some small formal changes - aeb, 950809 @@ -17,7 +17,7 @@ Last modified: 18-JAN-1998 Richard Gooch Devfs support */ -static const char *verstr = "20070203"; +static const char *verstr = "20080117"; #include @@ -3214,8 +3214,7 @@ static int partition_tape(struct scsi_tape *STp, int size) /* The ioctl command */ -static int st_ioctl(struct inode *inode, struct file *file, - unsigned int cmd_in, unsigned long arg) +static long st_ioctl(struct file *file, unsigned int cmd_in, unsigned long arg) { int i, cmd_nr, cmd_type, bt; int retval = 0; @@ -3870,7 +3869,7 @@ static const struct file_operations st_fops = .owner = THIS_MODULE, .read = st_read, .write = st_write, - .ioctl = st_ioctl, + .unlocked_ioctl = st_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = st_compat_ioctl, #endif -- cgit v1.2.3-59-g8ed1b From 4733fcb1fe4d64402a8bd18cec766e8b8ad25eee Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 17 Jan 2008 09:02:07 -0800 Subject: [SCSI] qla2xxx: Consolidate duplicate sense-data handling codes. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_isr.c | 85 +++++++++++++++--------------------------- 1 file changed, 31 insertions(+), 54 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 53cbaffbb78c..5d2dc92f7d9d 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -822,6 +822,35 @@ qla2x00_process_response_queue(struct scsi_qla_host *ha) WRT_REG_WORD(ISP_RSP_Q_OUT(ha, reg), ha->rsp_ring_index); } +static inline void +qla2x00_handle_sense(srb_t *sp, uint8_t *sense_data, uint32_t sense_len) +{ + struct scsi_cmnd *cp = sp->cmd; + + if (sense_len >= SCSI_SENSE_BUFFERSIZE) + sense_len = SCSI_SENSE_BUFFERSIZE; + + CMD_ACTUAL_SNSLEN(cp) = sense_len; + sp->request_sense_length = sense_len; + sp->request_sense_ptr = cp->sense_buffer; + if (sp->request_sense_length > 32) + sense_len = 32; + + memcpy(cp->sense_buffer, sense_data, sense_len); + + sp->request_sense_ptr += sense_len; + sp->request_sense_length -= sense_len; + if (sp->request_sense_length != 0) + sp->ha->status_srb = sp; + + DEBUG5(printk("%s(): Check condition Sense data, scsi(%ld:%d:%d:%d) " + "cmd=%p pid=%ld\n", __func__, sp->ha->host_no, cp->device->channel, + cp->device->id, cp->device->lun, cp, cp->serial_number)); + if (sense_len) + DEBUG5(qla2x00_dump_buffer(cp->sense_buffer, + CMD_ACTUAL_SNSLEN(cp))); +} + /** * qla2x00_status_entry() - Process a Status IOCB entry. * @ha: SCSI driver HA context @@ -976,36 +1005,11 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) if (lscsi_status != SS_CHECK_CONDITION) break; - /* Copy Sense Data into sense buffer. */ memset(cp->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); - if (!(scsi_status & SS_SENSE_LEN_VALID)) break; - if (sense_len >= SCSI_SENSE_BUFFERSIZE) - sense_len = SCSI_SENSE_BUFFERSIZE; - - CMD_ACTUAL_SNSLEN(cp) = sense_len; - sp->request_sense_length = sense_len; - sp->request_sense_ptr = cp->sense_buffer; - - if (sp->request_sense_length > 32) - sense_len = 32; - - memcpy(cp->sense_buffer, sense_data, sense_len); - - sp->request_sense_ptr += sense_len; - sp->request_sense_length -= sense_len; - if (sp->request_sense_length != 0) - ha->status_srb = sp; - - DEBUG5(printk("%s(): Check condition Sense data, " - "scsi(%ld:%d:%d:%d) cmd=%p pid=%ld\n", __func__, - ha->host_no, cp->device->channel, cp->device->id, - cp->device->lun, cp, cp->serial_number)); - if (sense_len) - DEBUG5(qla2x00_dump_buffer(cp->sense_buffer, - CMD_ACTUAL_SNSLEN(cp))); + qla2x00_handle_sense(sp, sense_data, sense_len); break; case CS_DATA_UNDERRUN: @@ -1060,34 +1064,11 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) if (lscsi_status != SS_CHECK_CONDITION) break; - /* Copy Sense Data into sense buffer */ memset(cp->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); - if (!(scsi_status & SS_SENSE_LEN_VALID)) break; - if (sense_len >= SCSI_SENSE_BUFFERSIZE) - sense_len = SCSI_SENSE_BUFFERSIZE; - - CMD_ACTUAL_SNSLEN(cp) = sense_len; - sp->request_sense_length = sense_len; - sp->request_sense_ptr = cp->sense_buffer; - - if (sp->request_sense_length > 32) - sense_len = 32; - - memcpy(cp->sense_buffer, sense_data, sense_len); - - sp->request_sense_ptr += sense_len; - sp->request_sense_length -= sense_len; - if (sp->request_sense_length != 0) - ha->status_srb = sp; - - DEBUG5(printk("%s(): Check condition Sense data, " - "scsi(%ld:%d:%d:%d) cmd=%p pid=%ld\n", - __func__, ha->host_no, cp->device->channel, - cp->device->id, cp->device->lun, cp, - cp->serial_number)); + qla2x00_handle_sense(sp, sense_data, sense_len); /* * In case of a Underrun condition, set both the lscsi @@ -1107,10 +1088,6 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) cp->result = DID_ERROR << 16 | lscsi_status; } - - if (sense_len) - DEBUG5(qla2x00_dump_buffer(cp->sense_buffer, - CMD_ACTUAL_SNSLEN(cp))); } else { /* * If RISC reports underrun and target does not report -- cgit v1.2.3-59-g8ed1b From 43ef058010c79a967195539bbcdeee8c5b24219d Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 17 Jan 2008 09:02:08 -0800 Subject: [SCSI] qla2xxx: Retrieve additional HBA port statistics from recent ISPs. HBAs supporting these additional counters include ISP24xx and ISP25xx type boards. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_attr.c | 44 ++++++++++++------ drivers/scsi/qla2xxx/qla_def.h | 22 +++++---- drivers/scsi/qla2xxx/qla_gbl.h | 7 +-- drivers/scsi/qla2xxx/qla_mbx.c | 99 +++++++++++------------------------------ 4 files changed, 74 insertions(+), 98 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 745283fcbf2c..e3bda8f7668c 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -967,35 +967,51 @@ qla2x00_get_fc_host_stats(struct Scsi_Host *shost) { scsi_qla_host_t *ha = shost_priv(shost); int rval; - uint16_t mb_stat[1]; - link_stat_t stat_buf; + struct link_statistics *stats; + dma_addr_t stats_dma; struct fc_host_statistics *pfc_host_stat; - rval = QLA_FUNCTION_FAILED; pfc_host_stat = &ha->fc_host_stat; memset(pfc_host_stat, -1, sizeof(struct fc_host_statistics)); + stats = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &stats_dma); + if (stats == NULL) { + DEBUG2_3_11(printk("%s(%ld): Failed to allocate memory.\n", + __func__, ha->host_no)); + goto done; + } + memset(stats, 0, DMA_POOL_SIZE); + + rval = QLA_FUNCTION_FAILED; if (IS_FWI2_CAPABLE(ha)) { - rval = qla24xx_get_isp_stats(ha, (uint32_t *)&stat_buf, - sizeof(stat_buf) / 4, mb_stat); + rval = qla24xx_get_isp_stats(ha, stats, stats_dma); } else if (atomic_read(&ha->loop_state) == LOOP_READY && !test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags) && !test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) && !ha->dpc_active) { /* Must be in a 'READY' state for statistics retrieval. */ - rval = qla2x00_get_link_status(ha, ha->loop_id, &stat_buf, - mb_stat); + rval = qla2x00_get_link_status(ha, ha->loop_id, stats, + stats_dma); } if (rval != QLA_SUCCESS) - goto done; + goto done_free; + + pfc_host_stat->link_failure_count = stats->link_fail_cnt; + pfc_host_stat->loss_of_sync_count = stats->loss_sync_cnt; + pfc_host_stat->loss_of_signal_count = stats->loss_sig_cnt; + pfc_host_stat->prim_seq_protocol_err_count = stats->prim_seq_err_cnt; + pfc_host_stat->invalid_tx_word_count = stats->inval_xmit_word_cnt; + pfc_host_stat->invalid_crc_count = stats->inval_crc_cnt; + if (IS_FWI2_CAPABLE(ha)) { + pfc_host_stat->tx_frames = stats->tx_frames; + pfc_host_stat->rx_frames = stats->rx_frames; + pfc_host_stat->dumped_frames = stats->dumped_frames; + pfc_host_stat->nos_count = stats->nos_rcvd; + } - pfc_host_stat->link_failure_count = stat_buf.link_fail_cnt; - pfc_host_stat->loss_of_sync_count = stat_buf.loss_sync_cnt; - pfc_host_stat->loss_of_signal_count = stat_buf.loss_sig_cnt; - pfc_host_stat->prim_seq_protocol_err_count = stat_buf.prim_seq_err_cnt; - pfc_host_stat->invalid_tx_word_count = stat_buf.inval_xmit_word_cnt; - pfc_host_stat->invalid_crc_count = stat_buf.inval_crc_cnt; +done_free: + dma_pool_free(ha->s_dma_pool, stats, stats_dma); done: return pfc_host_stat; } diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index fe8f7828f592..a33d3d57a17e 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -862,14 +862,20 @@ typedef struct { #define GLSO_SEND_RPS BIT_0 #define GLSO_USE_DID BIT_3 -typedef struct { - uint32_t link_fail_cnt; - uint32_t loss_sync_cnt; - uint32_t loss_sig_cnt; - uint32_t prim_seq_err_cnt; - uint32_t inval_xmit_word_cnt; - uint32_t inval_crc_cnt; -} link_stat_t; +struct link_statistics { + uint32_t link_fail_cnt; + uint32_t loss_sync_cnt; + uint32_t loss_sig_cnt; + uint32_t prim_seq_err_cnt; + uint32_t inval_xmit_word_cnt; + uint32_t inval_crc_cnt; + uint32_t unused1[0x1b]; + uint32_t tx_frames; + uint32_t rx_frames; + uint32_t dumped_frames; + uint32_t unused2[2]; + uint32_t nos_rcvd; +}; /* * NVRAM Command values. diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index 09cb2a908059..5b381dc8d749 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -222,11 +222,12 @@ extern int qla2x00_get_fcal_position_map(scsi_qla_host_t *ha, char *pos_map); extern int -qla2x00_get_link_status(scsi_qla_host_t *, uint16_t, link_stat_t *, - uint16_t *); +qla2x00_get_link_status(scsi_qla_host_t *, uint16_t, struct link_statistics *, + dma_addr_t); extern int -qla24xx_get_isp_stats(scsi_qla_host_t *, uint32_t *, uint32_t, uint16_t *); +qla24xx_get_isp_stats(scsi_qla_host_t *, struct link_statistics *, + dma_addr_t); extern int qla24xx_abort_command(scsi_qla_host_t *, srb_t *); extern int qla24xx_abort_target(fc_port_t *); diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 031f269149b1..0fc165288f88 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -2042,29 +2042,20 @@ qla2x00_get_fcal_position_map(scsi_qla_host_t *ha, char *pos_map) */ int qla2x00_get_link_status(scsi_qla_host_t *ha, uint16_t loop_id, - link_stat_t *ret_buf, uint16_t *status) + struct link_statistics *stats, dma_addr_t stats_dma) { int rval; mbx_cmd_t mc; mbx_cmd_t *mcp = &mc; - link_stat_t *stat_buf; - dma_addr_t stat_buf_dma; + uint32_t *siter, *diter, dwords; DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); - stat_buf = dma_pool_alloc(ha->s_dma_pool, GFP_ATOMIC, &stat_buf_dma); - if (stat_buf == NULL) { - DEBUG2_3_11(printk("%s(%ld): Failed to allocate memory.\n", - __func__, ha->host_no)); - return BIT_0; - } - memset(stat_buf, 0, sizeof(link_stat_t)); - mcp->mb[0] = MBC_GET_LINK_STATUS; - mcp->mb[2] = MSW(stat_buf_dma); - mcp->mb[3] = LSW(stat_buf_dma); - mcp->mb[6] = MSW(MSD(stat_buf_dma)); - mcp->mb[7] = LSW(MSD(stat_buf_dma)); + mcp->mb[2] = MSW(stats_dma); + mcp->mb[3] = LSW(stats_dma); + mcp->mb[6] = MSW(MSD(stats_dma)); + mcp->mb[7] = LSW(MSD(stats_dma)); mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_0; mcp->in_mb = MBX_0; if (IS_FWI2_CAPABLE(ha)) { @@ -2089,78 +2080,43 @@ qla2x00_get_link_status(scsi_qla_host_t *ha, uint16_t loop_id, if (mcp->mb[0] != MBS_COMMAND_COMPLETE) { DEBUG2_3_11(printk("%s(%ld): cmd failed. mbx0=%x.\n", __func__, ha->host_no, mcp->mb[0])); - status[0] = mcp->mb[0]; - rval = BIT_1; + rval = QLA_FUNCTION_FAILED; } else { - /* copy over data -- firmware data is LE. */ - ret_buf->link_fail_cnt = - le32_to_cpu(stat_buf->link_fail_cnt); - ret_buf->loss_sync_cnt = - le32_to_cpu(stat_buf->loss_sync_cnt); - ret_buf->loss_sig_cnt = - le32_to_cpu(stat_buf->loss_sig_cnt); - ret_buf->prim_seq_err_cnt = - le32_to_cpu(stat_buf->prim_seq_err_cnt); - ret_buf->inval_xmit_word_cnt = - le32_to_cpu(stat_buf->inval_xmit_word_cnt); - ret_buf->inval_crc_cnt = - le32_to_cpu(stat_buf->inval_crc_cnt); - - DEBUG11(printk("%s(%ld): stat dump: fail_cnt=%d " - "loss_sync=%d loss_sig=%d seq_err=%d " - "inval_xmt_word=%d inval_crc=%d.\n", __func__, - ha->host_no, stat_buf->link_fail_cnt, - stat_buf->loss_sync_cnt, stat_buf->loss_sig_cnt, - stat_buf->prim_seq_err_cnt, - stat_buf->inval_xmit_word_cnt, - stat_buf->inval_crc_cnt)); + /* Copy over data -- firmware data is LE. */ + dwords = offsetof(struct link_statistics, unused1) / 4; + siter = diter = &stats->link_fail_cnt; + while (dwords--) + *diter++ = le32_to_cpu(*siter++); } } else { /* Failed. */ DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__, ha->host_no, rval)); - rval = BIT_1; } - dma_pool_free(ha->s_dma_pool, stat_buf, stat_buf_dma); - return rval; } int -qla24xx_get_isp_stats(scsi_qla_host_t *ha, uint32_t *dwbuf, uint32_t dwords, - uint16_t *status) +qla24xx_get_isp_stats(scsi_qla_host_t *ha, struct link_statistics *stats, + dma_addr_t stats_dma) { int rval; mbx_cmd_t mc; mbx_cmd_t *mcp = &mc; - uint32_t *sbuf, *siter; - dma_addr_t sbuf_dma; + uint32_t *siter, *diter, dwords; DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); - if (dwords > (DMA_POOL_SIZE / 4)) { - DEBUG2_3_11(printk("%s(%ld): Unabled to retrieve %d DWORDs " - "(max %d).\n", __func__, ha->host_no, dwords, - DMA_POOL_SIZE / 4)); - return BIT_0; - } - sbuf = dma_pool_alloc(ha->s_dma_pool, GFP_ATOMIC, &sbuf_dma); - if (sbuf == NULL) { - DEBUG2_3_11(printk("%s(%ld): Failed to allocate memory.\n", - __func__, ha->host_no)); - return BIT_0; - } - memset(sbuf, 0, DMA_POOL_SIZE); - mcp->mb[0] = MBC_GET_LINK_PRIV_STATS; - mcp->mb[2] = MSW(sbuf_dma); - mcp->mb[3] = LSW(sbuf_dma); - mcp->mb[6] = MSW(MSD(sbuf_dma)); - mcp->mb[7] = LSW(MSD(sbuf_dma)); - mcp->mb[8] = dwords; + mcp->mb[2] = MSW(stats_dma); + mcp->mb[3] = LSW(stats_dma); + mcp->mb[6] = MSW(MSD(stats_dma)); + mcp->mb[7] = LSW(MSD(stats_dma)); + mcp->mb[8] = sizeof(struct link_statistics) / 4; + mcp->mb[9] = ha->vp_idx; mcp->mb[10] = 0; - mcp->out_mb = MBX_10|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_0; + mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_0; mcp->in_mb = MBX_2|MBX_1|MBX_0; mcp->tov = 30; mcp->flags = IOCTL_CMD; @@ -2170,23 +2126,20 @@ qla24xx_get_isp_stats(scsi_qla_host_t *ha, uint32_t *dwbuf, uint32_t dwords, if (mcp->mb[0] != MBS_COMMAND_COMPLETE) { DEBUG2_3_11(printk("%s(%ld): cmd failed. mbx0=%x.\n", __func__, ha->host_no, mcp->mb[0])); - status[0] = mcp->mb[0]; - rval = BIT_1; + rval = QLA_FUNCTION_FAILED; } else { /* Copy over data -- firmware data is LE. */ - siter = sbuf; + dwords = sizeof(struct link_statistics) / 4; + siter = diter = &stats->link_fail_cnt; while (dwords--) - *dwbuf++ = le32_to_cpu(*siter++); + *diter++ = le32_to_cpu(*siter++); } } else { /* Failed. */ DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__, ha->host_no, rval)); - rval = BIT_1; } - dma_pool_free(ha->s_dma_pool, sbuf, sbuf_dma); - return rval; } -- cgit v1.2.3-59-g8ed1b From 3776541d8a46347a4924353a192c6ce4a3d04e2e Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 17 Jan 2008 09:02:09 -0800 Subject: [SCSI] qla2xxx: Fix for 32-bit platforms with 64-bit resources. The driver stores the contents of PCI resources into unsigned long's before ioremapping. This breaks on 32-bit platforms which support 64-bit MMIO resources. Correct code by removing the temporary variables used during MMIO PIO mapping and using resource_size_t where applicable. Also correct a small typo in a printk() where the wrong region number was displayed. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_def.h | 3 +-- drivers/scsi/qla2xxx/qla_os.c | 22 +++++++--------------- 2 files changed, 8 insertions(+), 17 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index a33d3d57a17e..d0b78af60f7b 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2271,8 +2271,7 @@ typedef struct scsi_qla_host { int bars; device_reg_t __iomem *iobase; /* Base I/O address */ - unsigned long pio_address; - unsigned long pio_length; + resource_size_t pio_address; #define MIN_IOBASE_LEN 0x100 /* ISP ring lock, rings, and indexes */ diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index a5bcf1f390b3..df1694a2f875 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1479,8 +1479,7 @@ qla2x00_set_isp_flags(scsi_qla_host_t *ha) static int qla2x00_iospace_config(scsi_qla_host_t *ha) { - unsigned long pio, pio_len, pio_flags; - unsigned long mmio, mmio_len, mmio_flags; + resource_size_t pio; if (pci_request_selected_regions(ha->pdev, ha->bars, QLA2XXX_DRIVER_NAME)) { @@ -1495,10 +1494,8 @@ qla2x00_iospace_config(scsi_qla_host_t *ha) /* We only need PIO for Flash operations on ISP2312 v2 chips. */ pio = pci_resource_start(ha->pdev, 0); - pio_len = pci_resource_len(ha->pdev, 0); - pio_flags = pci_resource_flags(ha->pdev, 0); - if (pio_flags & IORESOURCE_IO) { - if (pio_len < MIN_IOBASE_LEN) { + if (pci_resource_flags(ha->pdev, 0) & IORESOURCE_IO) { + if (pci_resource_len(ha->pdev, 0) < MIN_IOBASE_LEN) { qla_printk(KERN_WARNING, ha, "Invalid PCI I/O region size (%s)...\n", pci_name(ha->pdev)); @@ -1511,28 +1508,23 @@ qla2x00_iospace_config(scsi_qla_host_t *ha) pio = 0; } ha->pio_address = pio; - ha->pio_length = pio_len; skip_pio: /* Use MMIO operations for all accesses. */ - mmio = pci_resource_start(ha->pdev, 1); - mmio_len = pci_resource_len(ha->pdev, 1); - mmio_flags = pci_resource_flags(ha->pdev, 1); - - if (!(mmio_flags & IORESOURCE_MEM)) { + if (!(pci_resource_flags(ha->pdev, 1) & IORESOURCE_MEM)) { qla_printk(KERN_ERR, ha, - "region #0 not an MMIO resource (%s), aborting\n", + "region #1 not an MMIO resource (%s), aborting\n", pci_name(ha->pdev)); goto iospace_error_exit; } - if (mmio_len < MIN_IOBASE_LEN) { + if (pci_resource_len(ha->pdev, 1) < MIN_IOBASE_LEN) { qla_printk(KERN_ERR, ha, "Invalid PCI mem region size (%s), aborting\n", pci_name(ha->pdev)); goto iospace_error_exit; } - ha->iobase = ioremap(mmio, MIN_IOBASE_LEN); + ha->iobase = ioremap(pci_resource_start(ha->pdev, 1), MIN_IOBASE_LEN); if (!ha->iobase) { qla_printk(KERN_ERR, ha, "cannot remap MMIO (%s), aborting\n", pci_name(ha->pdev)); -- cgit v1.2.3-59-g8ed1b From 6f13fd57cd84c06cea6c4b6d61517a4350820a9f Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 17 Jan 2008 09:02:10 -0800 Subject: [SCSI] qla2xxx: Wait for FLASH write-protection to complete after a write. Some flash parts have a slow enable write-protection (WP) operation whereby subsequent FLASH accesses would fail if the WP operation had not completed. Software now polls the SPI's status-register for WP completion. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_sup.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index ad2fa01bd233..af16c55b47a7 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -550,7 +550,7 @@ qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr, int ret; uint32_t liter, miter; uint32_t sec_mask, rest_addr, conf_addr; - uint32_t fdata, findex ; + uint32_t fdata, findex, cnt; uint8_t man_id, flash_id; struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; dma_addr_t optrom_dma; @@ -690,8 +690,14 @@ qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr, 0xff0000) | ((fdata >> 16) & 0xff)); } - /* Enable flash write-protection. */ + /* Enable flash write-protection and wait for completion. */ qla24xx_write_flash_dword(ha, flash_conf_to_access_addr(0x101), 0x9c); + for (cnt = 300; cnt && + qla24xx_read_flash_dword(ha, + flash_conf_to_access_addr(0x005)) & BIT_0; + cnt--) { + udelay(10); + } /* Disable flash write. */ WRT_REG_DWORD(®->ctrl_status, -- cgit v1.2.3-59-g8ed1b From da7429f9ab5ba939cec37d07ef7f6a630fe48421 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 17 Jan 2008 09:02:11 -0800 Subject: [SCSI] qla2xxx: Restrict MSI/MSI-X enablement on select ISP2432-type HBAs. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_isr.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 5d2dc92f7d9d..22216fe76059 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1829,6 +1829,18 @@ qla2x00_request_irqs(scsi_qla_host_t *ha) goto skip_msix; } + if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_HP && + (ha->pdev->subsystem_device == 0x7040 || + ha->pdev->subsystem_device == 0x7041 || + ha->pdev->subsystem_device == 0x1705)) { + DEBUG2(qla_printk(KERN_WARNING, ha, + "MSI-X: Unsupported ISP2432 SSVID/SSDID (0x%X, 0x%X).\n", + ha->pdev->subsystem_vendor, + ha->pdev->subsystem_device)); + + goto skip_msi; + } + ret = qla24xx_enable_msix(ha); if (!ret) { DEBUG2(qla_printk(KERN_INFO, ha, -- cgit v1.2.3-59-g8ed1b From a4722cf24d7a0dfa0874d49f61b053a6459761bf Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 17 Jan 2008 09:02:12 -0800 Subject: [SCSI] qla2xxx: Don't schedule the DPC routine to perform an issue-lip request. As the driver depends on the DPC routine to handle bottom-half loop resynchronization in order to recover from the issue-lip request. The issue_lip call is sleeping context capable, so just issue the reset function there. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_attr.c | 2 +- drivers/scsi/qla2xxx/qla_gbl.h | 2 ++ drivers/scsi/qla2xxx/qla_os.c | 3 +-- 3 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index e3bda8f7668c..22b3868e7a1f 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -958,7 +958,7 @@ qla2x00_issue_lip(struct Scsi_Host *shost) { scsi_qla_host_t *ha = shost_priv(shost); - set_bit(LOOP_RESET_NEEDED, &ha->dpc_flags); + qla2x00_loop_reset(ha); return 0; } diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index 5b381dc8d749..f6917b94701e 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -65,6 +65,8 @@ extern int ql2xextended_error_logging; extern int ql2xqfullrampup; extern int num_hosts; +extern int qla2x00_loop_reset(scsi_qla_host_t *); + /* * Global Functions in qla_mid.c source file. */ diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index df1694a2f875..0a414c0dd580 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -105,7 +105,6 @@ static int qla2xxx_eh_abort(struct scsi_cmnd *); static int qla2xxx_eh_device_reset(struct scsi_cmnd *); static int qla2xxx_eh_bus_reset(struct scsi_cmnd *); static int qla2xxx_eh_host_reset(struct scsi_cmnd *); -static int qla2x00_loop_reset(scsi_qla_host_t *ha); static int qla2x00_device_reset(scsi_qla_host_t *, fc_port_t *); static int qla2x00_change_queue_depth(struct scsi_device *, int); @@ -1060,7 +1059,7 @@ eh_host_reset_lock: * Returns: * 0 = success */ -static int +int qla2x00_loop_reset(scsi_qla_host_t *ha) { int ret; -- cgit v1.2.3-59-g8ed1b From 0b05a1f0d68bf4714c37aa7843c31df1866b017a Mon Sep 17 00:00:00 2001 From: Marcus Barrow Date: Thu, 17 Jan 2008 09:02:13 -0800 Subject: [SCSI] qla2xxx: Use completion routines. Instead of abusing the semaphore interfaces for mailbox command completions. Additional cleanups and Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_def.h | 4 ++-- drivers/scsi/qla2xxx/qla_gbl.h | 2 -- drivers/scsi/qla2xxx/qla_isr.c | 8 ++++---- drivers/scsi/qla2xxx/qla_mbx.c | 44 ++++-------------------------------------- drivers/scsi/qla2xxx/qla_mid.c | 5 +++-- drivers/scsi/qla2xxx/qla_os.c | 22 +++------------------ 6 files changed, 16 insertions(+), 69 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index d0b78af60f7b..144f6d04f3d1 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2413,9 +2413,9 @@ typedef struct scsi_qla_host { #define MBX_INTR_WAIT 2 #define MBX_UPDATE_FLASH_ACTIVE 3 - struct semaphore mbx_cmd_sem; /* Serialialize mbx access */ struct semaphore vport_sem; /* Virtual port synchronization */ - struct semaphore mbx_intr_sem; /* Used for completion notification */ + struct completion mbx_cmd_comp; /* Serialize mbx access */ + struct completion mbx_intr_comp; /* Used for completion notification */ uint32_t mbx_flags; #define MBX_IN_PROGRESS BIT_0 diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index f6917b94701e..fa4455f48f1d 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -105,8 +105,6 @@ extern char *qla2x00_get_fw_version_str(struct scsi_qla_host *, char *); extern void qla2x00_mark_device_lost(scsi_qla_host_t *, fc_port_t *, int, int); extern void qla2x00_mark_all_devices_lost(scsi_qla_host_t *, int); -extern int qla2x00_down_timeout(struct semaphore *, unsigned long); - extern struct fw_blob *qla2x00_request_firmware(scsi_qla_host_t *); extern int qla2x00_wait_for_hba_online(scsi_qla_host_t *); diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 22216fe76059..642a0c3f09c6 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -104,7 +104,7 @@ qla2100_intr_handler(int irq, void *dev_id) if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) && (status & MBX_INTERRUPT) && ha->flags.mbox_int) { set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags); - up(&ha->mbx_intr_sem); + complete(&ha->mbx_intr_comp); } return (IRQ_HANDLED); @@ -216,7 +216,7 @@ qla2300_intr_handler(int irq, void *dev_id) if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) && (status & MBX_INTERRUPT) && ha->flags.mbox_int) { set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags); - up(&ha->mbx_intr_sem); + complete(&ha->mbx_intr_comp); } return (IRQ_HANDLED); @@ -1597,7 +1597,7 @@ qla24xx_intr_handler(int irq, void *dev_id) if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) && (status & MBX_INTERRUPT) && ha->flags.mbox_int) { set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags); - up(&ha->mbx_intr_sem); + complete(&ha->mbx_intr_comp); } return IRQ_HANDLED; @@ -1734,7 +1734,7 @@ qla24xx_msix_default(int irq, void *dev_id) if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) && (status & MBX_INTERRUPT) && ha->flags.mbox_int) { set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags); - up(&ha->mbx_intr_sem); + complete(&ha->mbx_intr_comp); } return IRQ_HANDLED; diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 0fc165288f88..d23d6fcfb225 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -8,19 +8,6 @@ #include -static void -qla2x00_mbx_sem_timeout(unsigned long data) -{ - struct semaphore *sem_ptr = (struct semaphore *)data; - - DEBUG11(printk("qla2x00_sem_timeout: entered.\n")); - - if (sem_ptr != NULL) { - up(sem_ptr); - } - - DEBUG11(printk("qla2x00_mbx_sem_timeout: exiting.\n")); -} /* * qla2x00_mailbox_command @@ -47,7 +34,6 @@ qla2x00_mailbox_command(scsi_qla_host_t *pvha, mbx_cmd_t *mcp) int rval; unsigned long flags = 0; device_reg_t __iomem *reg; - struct timer_list tmp_intr_timer; uint8_t abort_active; uint8_t io_lock_on; uint16_t command; @@ -72,7 +58,8 @@ qla2x00_mailbox_command(scsi_qla_host_t *pvha, mbx_cmd_t *mcp) * non ISP abort time. */ if (!abort_active) { - if (qla2x00_down_timeout(&ha->mbx_cmd_sem, mcp->tov * HZ)) { + if (!wait_for_completion_timeout(&ha->mbx_cmd_comp, + mcp->tov * HZ)) { /* Timeout occurred. Return error. */ DEBUG2_3_11(printk("%s(%ld): cmd access timeout. " "Exiting.\n", __func__, ha->host_no)); @@ -135,22 +122,6 @@ qla2x00_mailbox_command(scsi_qla_host_t *pvha, mbx_cmd_t *mcp) /* Wait for mbx cmd completion until timeout */ if (!abort_active && io_lock_on) { - /* sleep on completion semaphore */ - DEBUG11(printk("%s(%ld): INTERRUPT MODE. Initializing timer.\n", - __func__, ha->host_no)); - - init_timer(&tmp_intr_timer); - tmp_intr_timer.data = (unsigned long)&ha->mbx_intr_sem; - tmp_intr_timer.expires = jiffies + mcp->tov * HZ; - tmp_intr_timer.function = - (void (*)(unsigned long))qla2x00_mbx_sem_timeout; - - DEBUG11(printk("%s(%ld): Adding timer.\n", __func__, - ha->host_no)); - add_timer(&tmp_intr_timer); - - DEBUG11(printk("%s(%ld): going to unlock & sleep. " - "time=0x%lx.\n", __func__, ha->host_no, jiffies)); set_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags); @@ -160,17 +131,10 @@ qla2x00_mailbox_command(scsi_qla_host_t *pvha, mbx_cmd_t *mcp) WRT_REG_WORD(®->isp.hccr, HCCR_SET_HOST_INT); spin_unlock_irqrestore(&ha->hardware_lock, flags); - /* Wait for either the timer to expire - * or the mbox completion interrupt - */ - down(&ha->mbx_intr_sem); + wait_for_completion_timeout(&ha->mbx_intr_comp, mcp->tov * HZ); - DEBUG11(printk("%s(%ld): waking up. time=0x%lx\n", __func__, - ha->host_no, jiffies)); clear_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags); - /* delete the timer */ - del_timer(&tmp_intr_timer); } else { DEBUG3_11(printk("%s(%ld): cmd=%x POLLING MODE.\n", __func__, ha->host_no, command)); @@ -299,7 +263,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *pvha, mbx_cmd_t *mcp) /* Allow next mbx cmd to come in. */ if (!abort_active) - up(&ha->mbx_cmd_sem); + complete(&ha->mbx_cmd_comp); if (rval) { DEBUG2_3_11(printk("%s(%ld): **** FAILED. mbx0=%x, mbx1=%x, " diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index 74096aaa693c..325bdab11903 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -403,8 +403,9 @@ qla24xx_create_vhost(struct fc_vport *fc_vport) } vha->mgmt_svr_loop_id = 10 + vha->vp_idx; - init_MUTEX(&vha->mbx_cmd_sem); - init_MUTEX_LOCKED(&vha->mbx_intr_sem); + init_completion(&vha->mbx_cmd_comp); + complete(&vha->mbx_cmd_comp); + init_completion(&vha->mbx_intr_comp); INIT_LIST_HEAD(&vha->list); INIT_LIST_HEAD(&vha->fcports); diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 0a414c0dd580..b9ee56567940 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1692,9 +1692,10 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) /* load the F/W, read paramaters, and init the H/W */ ha->instance = num_hosts; - init_MUTEX(&ha->mbx_cmd_sem); init_MUTEX(&ha->vport_sem); - init_MUTEX_LOCKED(&ha->mbx_intr_sem); + init_completion(&ha->mbx_cmd_comp); + complete(&ha->mbx_cmd_comp); + init_completion(&ha->mbx_intr_comp); INIT_LIST_HEAD(&ha->list); INIT_LIST_HEAD(&ha->fcports); @@ -2739,23 +2740,6 @@ qla2x00_timer(scsi_qla_host_t *ha) qla2x00_restart_timer(ha, WATCH_INTERVAL); } -/* XXX(hch): crude hack to emulate a down_timeout() */ -int -qla2x00_down_timeout(struct semaphore *sema, unsigned long timeout) -{ - const unsigned int step = 100; /* msecs */ - unsigned int iterations = jiffies_to_msecs(timeout)/100; - - do { - if (!down_trylock(sema)) - return 0; - if (msleep_interruptible(step)) - break; - } while (--iterations > 0); - - return -ETIMEDOUT; -} - /* Firmware interface routines. */ #define FW_BLOBS 6 -- cgit v1.2.3-59-g8ed1b From 50db6b134c31351a03cec9d2a7f9e61f63a5ce9f Mon Sep 17 00:00:00 2001 From: Seokmann Ju Date: Thu, 17 Jan 2008 09:02:14 -0800 Subject: [SCSI] qla2xxx: Add a filter to compare port_name against the physical on vport creation. During vport creation, there was a possibility to get create a vport with same port_name as pport. A new filter has added to compare given port_name with the port_name of the pport. Signed-Off-by: Seokmann Ju Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_mid.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index 325bdab11903..dea37689b7d4 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -341,6 +341,8 @@ qla24xx_vport_create_req_sanity_check(struct fc_vport *fc_vport) /* Check up unique WWPN */ u64_to_wwn(fc_vport->port_name, port_name); + if (!memcmp(port_name, ha->port_name, WWN_SIZE)) + return VPCERR_BAD_WWN; vha = qla24xx_find_vhost_by_name(ha, port_name); if (vha) return VPCERR_BAD_WWN; -- cgit v1.2.3-59-g8ed1b From a824ebb37c1a1c5fd8e19b47bf5c14cb7b419b48 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 17 Jan 2008 09:02:15 -0800 Subject: [SCSI] qla2xxx: Code cleanups. - make the following needlessly global code static: - qla_attr.c: qla24xx_vport_delete() - qla_attr.c: qla24xx_vport_disable() - qla_mid.c: qla24xx_allocate_vp_id() - qla_mid.c: qla24xx_find_vhost_by_name() - qla_mid.c: qla2x00_do_dpc_vp() - qla_os.c: struct qla2x00_driver_template - qla_os.c: qla2x00_stop_timer() - qla_os.c: qla2x00_mem_alloc() - qla_os.c: qla2x00_mem_free() - qla_sup.c: qla2x00_lock_nvram_access() - qla_sup.c: qla2x00_unlock_nvram_access() - qla_sup.c: qla2x00_get_nvram_word() - qla_sup.c: qla2x00_write_nvram_word() - #if 0 the following unused global functions: - qla_mbx.c: qla2x00_system_error() - qla_os.c: remove some unneeded function prototypes - removed unused functions: - qla_dbg.c: qla2x00_dump_pkt() - qla_mbx.c: qla2x00_get_serdes_params() - qla_mbx.c: qla2x00_get_idma_speed() - qla_mbx.c: qla24xx_get_vp_database() - qla_mbx.c: qla24xx_get_vp_entry() Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Small modifications and Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_attr.c | 6 +- drivers/scsi/qla2xxx/qla_dbg.c | 15 ---- drivers/scsi/qla2xxx/qla_gbl.h | 25 ------ drivers/scsi/qla2xxx/qla_mbx.c | 177 +--------------------------------------- drivers/scsi/qla2xxx/qla_mid.c | 6 +- drivers/scsi/qla2xxx/qla_os.c | 20 ++--- drivers/scsi/qla2xxx/qla_sup.c | 8 +- 7 files changed, 19 insertions(+), 238 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 22b3868e7a1f..adf97320574b 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -9,7 +9,7 @@ #include #include -int qla24xx_vport_disable(struct fc_vport *, bool); +static int qla24xx_vport_disable(struct fc_vport *, bool); /* SYSFS attributes --------------------------------------------------------- */ @@ -1129,7 +1129,7 @@ vport_create_failed_2: return FC_VPORT_FAILED; } -int +static int qla24xx_vport_delete(struct fc_vport *fc_vport) { scsi_qla_host_t *ha = shost_priv(fc_vport->shost); @@ -1162,7 +1162,7 @@ qla24xx_vport_delete(struct fc_vport *fc_vport) return 0; } -int +static int qla24xx_vport_disable(struct fc_vport *fc_vport, bool disable) { scsi_qla_host_t *vha = fc_vport->dd_data; diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index eaa04dabcdf6..796c4ce87831 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -1428,21 +1428,6 @@ qla2x00_print_scsi_cmd(struct scsi_cmnd * cmd) printk(" sp flags=0x%x\n", sp->flags); } -void -qla2x00_dump_pkt(void *pkt) -{ - uint32_t i; - uint8_t *data = (uint8_t *) pkt; - - for (i = 0; i < 64; i++) { - if (!(i % 4)) - printk("\n%02x: ", i); - - printk("%02x ", data[i]); - } - printk("\n"); -} - #if defined(QL_DEBUG_ROUTINES) /* * qla2x00_formatted_dump_buffer diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index fa4455f48f1d..fd7553920e00 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -70,30 +70,20 @@ extern int qla2x00_loop_reset(scsi_qla_host_t *); /* * Global Functions in qla_mid.c source file. */ -extern struct scsi_host_template qla2x00_driver_template; extern struct scsi_host_template qla24xx_driver_template; extern struct scsi_transport_template *qla2xxx_transport_vport_template; -extern uint8_t qla2x00_mem_alloc(scsi_qla_host_t *); extern void qla2x00_timer(scsi_qla_host_t *); extern void qla2x00_start_timer(scsi_qla_host_t *, void *, unsigned long); -extern void qla2x00_stop_timer(scsi_qla_host_t *); -extern uint32_t qla24xx_allocate_vp_id(scsi_qla_host_t *); extern void qla24xx_deallocate_vp_id(scsi_qla_host_t *); extern int qla24xx_disable_vp (scsi_qla_host_t *); extern int qla24xx_enable_vp (scsi_qla_host_t *); -extern void qla2x00_mem_free(scsi_qla_host_t *); extern int qla24xx_control_vp(scsi_qla_host_t *, int ); extern int qla24xx_modify_vp_config(scsi_qla_host_t *); extern int qla2x00_send_change_request(scsi_qla_host_t *, uint16_t, uint16_t); extern void qla2x00_vp_stop_timer(scsi_qla_host_t *); extern int qla24xx_configure_vhba (scsi_qla_host_t *); -extern int qla24xx_get_vp_entry(scsi_qla_host_t *, uint16_t, int); -extern int qla24xx_get_vp_database(scsi_qla_host_t *, uint16_t); -extern int qla2x00_do_dpc_vp(scsi_qla_host_t *); extern void qla24xx_report_id_acquisition(scsi_qla_host_t *, struct vp_rpt_id_entry_24xx *); -extern scsi_qla_host_t * qla24xx_find_vhost_by_name(scsi_qla_host_t *, - uint8_t *); extern void qla2x00_do_dpc_all_vps(scsi_qla_host_t *); extern int qla24xx_vport_create_req_sanity_check(struct fc_vport *); extern scsi_qla_host_t * qla24xx_create_vhost(struct fc_vport *); @@ -113,7 +103,6 @@ extern void qla2xxx_wake_dpc(scsi_qla_host_t *); extern void qla2x00_alert_all_vps(scsi_qla_host_t *, uint16_t *); extern void qla2x00_async_event(scsi_qla_host_t *, uint16_t *); extern void qla2x00_vp_abort_isp(scsi_qla_host_t *); -extern int qla24xx_vport_delete(struct fc_vport *); /* * Global Function Prototypes in qla_iocb.c source file. @@ -232,12 +221,6 @@ qla24xx_get_isp_stats(scsi_qla_host_t *, struct link_statistics *, extern int qla24xx_abort_command(scsi_qla_host_t *, srb_t *); extern int qla24xx_abort_target(fc_port_t *); -extern int qla2x00_system_error(scsi_qla_host_t *); - -extern int -qla2x00_get_serdes_params(scsi_qla_host_t *, uint16_t *, uint16_t *, - uint16_t *); - extern int qla2x00_set_serdes_params(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t); @@ -250,9 +233,6 @@ qla2x00_trace_control(scsi_qla_host_t *, uint16_t, dma_addr_t, uint16_t); extern int qla2x00_read_sfp(scsi_qla_host_t *, dma_addr_t, uint16_t, uint16_t, uint16_t); -extern int -qla2x00_get_idma_speed(scsi_qla_host_t *, uint16_t, uint16_t *, uint16_t *); - extern int qla2x00_set_idma_speed(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t *); @@ -271,11 +251,7 @@ extern void qla2x00_free_irqs(scsi_qla_host_t *); /* * Global Function Prototypes in qla_sup.c source file. */ -extern void qla2x00_lock_nvram_access(scsi_qla_host_t *); -extern void qla2x00_unlock_nvram_access(scsi_qla_host_t *); extern void qla2x00_release_nvram_protection(scsi_qla_host_t *); -extern uint16_t qla2x00_get_nvram_word(scsi_qla_host_t *, uint32_t); -extern void qla2x00_write_nvram_word(scsi_qla_host_t *, uint32_t, uint16_t); extern uint32_t *qla24xx_read_flash_data(scsi_qla_host_t *, uint32_t *, uint32_t, uint32_t); extern uint8_t *qla2x00_read_nvram_data(scsi_qla_host_t *, uint8_t *, uint32_t, @@ -322,7 +298,6 @@ extern void qla25xx_fw_dump(scsi_qla_host_t *, int); extern void qla2x00_dump_regs(scsi_qla_host_t *); extern void qla2x00_dump_buffer(uint8_t *, uint32_t); extern void qla2x00_print_scsi_cmd(struct scsi_cmnd *); -extern void qla2x00_dump_pkt(void *); /* * Global Function Prototypes in qla_gs.c source file. diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index d23d6fcfb225..ee7899d31e18 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -2248,6 +2248,8 @@ atarget_done: return rval; } +#if 0 + int qla2x00_system_error(scsi_qla_host_t *ha) { @@ -2277,47 +2279,7 @@ qla2x00_system_error(scsi_qla_host_t *ha) return rval; } -/** - * qla2x00_get_serdes_params() - - * @ha: HA context - * - * Returns - */ -int -qla2x00_get_serdes_params(scsi_qla_host_t *ha, uint16_t *sw_em_1g, - uint16_t *sw_em_2g, uint16_t *sw_em_4g) -{ - int rval; - mbx_cmd_t mc; - mbx_cmd_t *mcp = &mc; - - DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); - - mcp->mb[0] = MBC_SERDES_PARAMS; - mcp->mb[1] = 0; - mcp->out_mb = MBX_1|MBX_0; - mcp->in_mb = MBX_4|MBX_3|MBX_2|MBX_0; - mcp->tov = 30; - mcp->flags = 0; - rval = qla2x00_mailbox_command(ha, mcp); - - if (rval != QLA_SUCCESS) { - /*EMPTY*/ - DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__, - ha->host_no, rval, mcp->mb[0])); - } else { - DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); - - if (sw_em_1g) - *sw_em_1g = mcp->mb[2]; - if (sw_em_2g) - *sw_em_2g = mcp->mb[3]; - if (sw_em_4g) - *sw_em_4g = mcp->mb[4]; - } - - return rval; -} +#endif /* 0 */ /** * qla2x00_set_serdes_params() - @@ -2465,49 +2427,6 @@ qla2x00_read_sfp(scsi_qla_host_t *ha, dma_addr_t sfp_dma, uint16_t addr, return rval; } -int -qla2x00_get_idma_speed(scsi_qla_host_t *ha, uint16_t loop_id, - uint16_t *port_speed, uint16_t *mb) -{ - int rval; - mbx_cmd_t mc; - mbx_cmd_t *mcp = &mc; - - if (!IS_IIDMA_CAPABLE(ha)) - return QLA_FUNCTION_FAILED; - - DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); - - mcp->mb[0] = MBC_PORT_PARAMS; - mcp->mb[1] = loop_id; - mcp->mb[2] = mcp->mb[3] = mcp->mb[4] = mcp->mb[5] = 0; - mcp->out_mb = MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; - mcp->in_mb = MBX_5|MBX_4|MBX_3|MBX_1|MBX_0; - mcp->tov = 30; - mcp->flags = 0; - rval = qla2x00_mailbox_command(ha, mcp); - - /* Return mailbox statuses. */ - if (mb != NULL) { - mb[0] = mcp->mb[0]; - mb[1] = mcp->mb[1]; - mb[3] = mcp->mb[3]; - mb[4] = mcp->mb[4]; - mb[5] = mcp->mb[5]; - } - - if (rval != QLA_SUCCESS) { - DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__, - ha->host_no, rval)); - } else { - DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); - if (port_speed) - *port_speed = mcp->mb[3]; - } - - return rval; -} - int qla2x00_set_idma_speed(scsi_qla_host_t *ha, uint16_t loop_id, uint16_t port_speed, uint16_t *mb) @@ -2551,96 +2470,6 @@ qla2x00_set_idma_speed(scsi_qla_host_t *ha, uint16_t loop_id, return rval; } -/* - * qla24xx_get_vp_database - * Get the VP's database for all configured ports. - * - * Input: - * ha = adapter block pointer. - * size = size of initialization control block. - * - * Returns: - * qla2x00 local function return status code. - * - * Context: - * Kernel context. - */ -int -qla24xx_get_vp_database(scsi_qla_host_t *ha, uint16_t size) -{ - int rval; - mbx_cmd_t mc; - mbx_cmd_t *mcp = &mc; - - DEBUG11(printk("scsi(%ld):%s - entered.\n", - ha->host_no, __func__)); - - mcp->mb[0] = MBC_MID_GET_VP_DATABASE; - mcp->mb[2] = MSW(ha->init_cb_dma); - mcp->mb[3] = LSW(ha->init_cb_dma); - mcp->mb[4] = 0; - mcp->mb[5] = 0; - mcp->mb[6] = MSW(MSD(ha->init_cb_dma)); - mcp->mb[7] = LSW(MSD(ha->init_cb_dma)); - mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_0; - mcp->in_mb = MBX_1|MBX_0; - mcp->buf_size = size; - mcp->flags = MBX_DMA_OUT; - mcp->tov = MBX_TOV_SECONDS; - rval = qla2x00_mailbox_command(ha, mcp); - - if (rval != QLA_SUCCESS) { - /*EMPTY*/ - DEBUG2_3_11(printk("%s(%ld): failed=%x " - "mb0=%x.\n", - __func__, ha->host_no, rval, mcp->mb[0])); - } else { - /*EMPTY*/ - DEBUG11(printk("%s(%ld): done.\n", - __func__, ha->host_no)); - } - - return rval; -} - -int -qla24xx_get_vp_entry(scsi_qla_host_t *ha, uint16_t size, int vp_id) -{ - int rval; - mbx_cmd_t mc; - mbx_cmd_t *mcp = &mc; - - DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); - - mcp->mb[0] = MBC_MID_GET_VP_ENTRY; - mcp->mb[2] = MSW(ha->init_cb_dma); - mcp->mb[3] = LSW(ha->init_cb_dma); - mcp->mb[4] = 0; - mcp->mb[5] = 0; - mcp->mb[6] = MSW(MSD(ha->init_cb_dma)); - mcp->mb[7] = LSW(MSD(ha->init_cb_dma)); - mcp->mb[9] = vp_id; - mcp->out_mb = MBX_9|MBX_7|MBX_6|MBX_3|MBX_2|MBX_0; - mcp->in_mb = MBX_0; - mcp->buf_size = size; - mcp->flags = MBX_DMA_OUT; - mcp->tov = 30; - rval = qla2x00_mailbox_command(ha, mcp); - - if (rval != QLA_SUCCESS) { - /*EMPTY*/ - DEBUG2_3_11(printk("qla24xx_get_vp_entry(%ld): failed=%x " - "mb0=%x.\n", - ha->host_no, rval, mcp->mb[0])); - } else { - /*EMPTY*/ - DEBUG11(printk("qla24xx_get_vp_entry(%ld): done.\n", - ha->host_no)); - } - - return rval; -} - void qla24xx_report_id_acquisition(scsi_qla_host_t *ha, struct vp_rpt_id_entry_24xx *rptid_entry) diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index dea37689b7d4..cf784cdafb01 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -39,7 +39,7 @@ qla2x00_vp_stop_timer(scsi_qla_host_t *vha) } } -uint32_t +static uint32_t qla24xx_allocate_vp_id(scsi_qla_host_t *vha) { uint32_t vp_id; @@ -77,7 +77,7 @@ qla24xx_deallocate_vp_id(scsi_qla_host_t *vha) up(&ha->vport_sem); } -scsi_qla_host_t * +static scsi_qla_host_t * qla24xx_find_vhost_by_name(scsi_qla_host_t *ha, uint8_t *port_name) { scsi_qla_host_t *vha; @@ -265,7 +265,7 @@ qla2x00_vp_abort_isp(scsi_qla_host_t *vha) qla24xx_enable_vp(vha); } -int +static int qla2x00_do_dpc_vp(scsi_qla_host_t *vha) { if (test_and_clear_bit(VP_IDX_ACQUIRED, &vha->vp_flags)) { diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index b9ee56567940..23ee05913fc5 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -110,7 +110,7 @@ static int qla2x00_device_reset(scsi_qla_host_t *, fc_port_t *); static int qla2x00_change_queue_depth(struct scsi_device *, int); static int qla2x00_change_queue_type(struct scsi_device *, int); -struct scsi_host_template qla2x00_driver_template = { +static struct scsi_host_template qla2x00_driver_template = { .module = THIS_MODULE, .name = QLA2XXX_DRIVER_NAME, .queuecommand = qla2x00_queuecommand, @@ -178,13 +178,6 @@ struct scsi_transport_template *qla2xxx_transport_vport_template = NULL; * Timer routines */ -void qla2x00_timer(scsi_qla_host_t *); - -__inline__ void qla2x00_start_timer(scsi_qla_host_t *, - void *, unsigned long); -static __inline__ void qla2x00_restart_timer(scsi_qla_host_t *, unsigned long); -__inline__ void qla2x00_stop_timer(scsi_qla_host_t *); - __inline__ void qla2x00_start_timer(scsi_qla_host_t *ha, void *func, unsigned long interval) { @@ -202,7 +195,7 @@ qla2x00_restart_timer(scsi_qla_host_t *ha, unsigned long interval) mod_timer(&ha->timer, jiffies + interval * HZ); } -__inline__ void +static __inline__ void qla2x00_stop_timer(scsi_qla_host_t *ha) { del_timer_sync(&ha->timer); @@ -213,12 +206,11 @@ static int qla2x00_do_dpc(void *data); static void qla2x00_rst_aen(scsi_qla_host_t *); -uint8_t qla2x00_mem_alloc(scsi_qla_host_t *); -void qla2x00_mem_free(scsi_qla_host_t *ha); +static uint8_t qla2x00_mem_alloc(scsi_qla_host_t *); +static void qla2x00_mem_free(scsi_qla_host_t *ha); static int qla2x00_allocate_sp_pool( scsi_qla_host_t *ha); static void qla2x00_free_sp_pool(scsi_qla_host_t *ha); static void qla2x00_sp_free_dma(scsi_qla_host_t *, srb_t *); -void qla2x00_sp_compl(scsi_qla_host_t *ha, srb_t *); /* -------------------------------------------------------------------------- */ @@ -2008,7 +2000,7 @@ qla2x00_mark_all_devices_lost(scsi_qla_host_t *ha, int defer) * 0 = success. * 1 = failure. */ -uint8_t +static uint8_t qla2x00_mem_alloc(scsi_qla_host_t *ha) { char name[16]; @@ -2205,7 +2197,7 @@ qla2x00_mem_alloc(scsi_qla_host_t *ha) * Input: * ha = adapter block pointer. */ -void +static void qla2x00_mem_free(scsi_qla_host_t *ha) { struct list_head *fcpl, *fcptemp; diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index af16c55b47a7..b68fb73613ed 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -22,7 +22,7 @@ static void qla2x00_nv_write(scsi_qla_host_t *, uint16_t); * qla2x00_lock_nvram_access() - * @ha: HA context */ -void +static void qla2x00_lock_nvram_access(scsi_qla_host_t *ha) { uint16_t data; @@ -55,7 +55,7 @@ qla2x00_lock_nvram_access(scsi_qla_host_t *ha) * qla2x00_unlock_nvram_access() - * @ha: HA context */ -void +static void qla2x00_unlock_nvram_access(scsi_qla_host_t *ha) { struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; @@ -74,7 +74,7 @@ qla2x00_unlock_nvram_access(scsi_qla_host_t *ha) * * Returns the word read from nvram @addr. */ -uint16_t +static uint16_t qla2x00_get_nvram_word(scsi_qla_host_t *ha, uint32_t addr) { uint16_t data; @@ -93,7 +93,7 @@ qla2x00_get_nvram_word(scsi_qla_host_t *ha, uint32_t addr) * @addr: Address in NVRAM to write * @data: word to program */ -void +static void qla2x00_write_nvram_word(scsi_qla_host_t *ha, uint32_t addr, uint16_t data) { int count; -- cgit v1.2.3-59-g8ed1b From 00b6bd25166e2a4bad23c614c10c55993bb2489e Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 17 Jan 2008 09:02:16 -0800 Subject: [SCSI] qla2xxx: Trace-Control naming cleanups. In preparation for FCE (Fibre Channel Event) tracing support. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_def.h | 3 --- drivers/scsi/qla2xxx/qla_fw.h | 7 ++++++ drivers/scsi/qla2xxx/qla_gbl.h | 4 +++- drivers/scsi/qla2xxx/qla_init.c | 5 ++--- drivers/scsi/qla2xxx/qla_mbx.c | 49 +++++++++++++++++++++++++++++++---------- drivers/scsi/qla2xxx/qla_os.c | 2 +- 6 files changed, 50 insertions(+), 20 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 144f6d04f3d1..3f934bdce6ae 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -623,9 +623,6 @@ typedef struct { #define MBC_GET_LINK_PRIV_STATS 0x6d /* Get link & private data. */ #define MBC_SET_VENDOR_ID 0x76 /* Set Vendor ID. */ -#define TC_ENABLE 4 -#define TC_DISABLE 5 - /* Firmware return data sizes */ #define FCAL_MAP_SIZE 128 diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h index 69a5e31dd93a..ef14bcde712a 100644 --- a/drivers/scsi/qla2xxx/qla_fw.h +++ b/drivers/scsi/qla2xxx/qla_fw.h @@ -952,6 +952,13 @@ struct device_reg_24xx { uint32_t iobase_sdata; }; +/* Trace Control *************************************************************/ + +#define TC_AEN_DISABLE 0 + +#define TC_EFT_ENABLE 4 +#define TC_EFT_DISABLE 5 + /* MID Support ***************************************************************/ #define MIN_MULTI_ID_FABRIC 64 /* Must be power-of-2. */ diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index fd7553920e00..2fd31fdafcc9 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -228,7 +228,9 @@ extern int qla2x00_stop_firmware(scsi_qla_host_t *); extern int -qla2x00_trace_control(scsi_qla_host_t *, uint16_t, dma_addr_t, uint16_t); +qla2x00_enable_eft_trace(scsi_qla_host_t *, dma_addr_t, uint16_t); +extern int +qla2x00_disable_eft_trace(scsi_qla_host_t *); extern int qla2x00_read_sfp(scsi_qla_host_t *, dma_addr_t, uint16_t, uint16_t, uint16_t); diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 03444d6e4d26..da2cce011520 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -766,8 +766,7 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *ha) goto cont_alloc; } - rval = qla2x00_trace_control(ha, TC_ENABLE, eft_dma, - EFT_NUM_BUFFERS); + rval = qla2x00_enable_eft_trace(ha, eft_dma, EFT_NUM_BUFFERS); if (rval) { qla_printk(KERN_WARNING, ha, "Unable to initialize " "EFT (%d).\n", rval); @@ -3240,7 +3239,7 @@ qla2x00_abort_isp(scsi_qla_host_t *ha) clear_bit(ISP_ABORT_RETRY, &ha->dpc_flags); if (ha->eft) { - rval = qla2x00_trace_control(ha, TC_ENABLE, + rval = qla2x00_enable_eft_trace(ha, ha->eft_dma, EFT_NUM_BUFFERS); if (rval) { qla_printk(KERN_WARNING, ha, diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index ee7899d31e18..7c6aa4ec8f4f 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -2350,7 +2350,7 @@ qla2x00_stop_firmware(scsi_qla_host_t *ha) } int -qla2x00_trace_control(scsi_qla_host_t *ha, uint16_t ctrl, dma_addr_t eft_dma, +qla2x00_enable_eft_trace(scsi_qla_host_t *ha, dma_addr_t eft_dma, uint16_t buffers) { int rval; @@ -2363,22 +2363,47 @@ qla2x00_trace_control(scsi_qla_host_t *ha, uint16_t ctrl, dma_addr_t eft_dma, DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); mcp->mb[0] = MBC_TRACE_CONTROL; - mcp->mb[1] = ctrl; - mcp->out_mb = MBX_1|MBX_0; + mcp->mb[1] = TC_EFT_ENABLE; + mcp->mb[2] = LSW(eft_dma); + mcp->mb[3] = MSW(eft_dma); + mcp->mb[4] = LSW(MSD(eft_dma)); + mcp->mb[5] = MSW(MSD(eft_dma)); + mcp->mb[6] = buffers; + mcp->mb[7] = TC_AEN_DISABLE; + mcp->out_mb = MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; mcp->in_mb = MBX_1|MBX_0; - if (ctrl == TC_ENABLE) { - mcp->mb[2] = LSW(eft_dma); - mcp->mb[3] = MSW(eft_dma); - mcp->mb[4] = LSW(MSD(eft_dma)); - mcp->mb[5] = MSW(MSD(eft_dma)); - mcp->mb[6] = buffers; - mcp->mb[7] = 0; - mcp->out_mb |= MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2; - } mcp->tov = 30; mcp->flags = 0; rval = qla2x00_mailbox_command(ha, mcp); + if (rval != QLA_SUCCESS) { + DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n", + __func__, ha->host_no, rval, mcp->mb[0], mcp->mb[1])); + } else { + DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); + } + + return rval; +} +int +qla2x00_disable_eft_trace(scsi_qla_host_t *ha) +{ + int rval; + mbx_cmd_t mc; + mbx_cmd_t *mcp = &mc; + + if (!IS_FWI2_CAPABLE(ha)) + return QLA_FUNCTION_FAILED; + + DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); + + mcp->mb[0] = MBC_TRACE_CONTROL; + mcp->mb[1] = TC_EFT_DISABLE; + mcp->out_mb = MBX_1|MBX_0; + mcp->in_mb = MBX_1|MBX_0; + mcp->tov = 30; + mcp->flags = 0; + rval = qla2x00_mailbox_command(ha, mcp); if (rval != QLA_SUCCESS) { DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n", __func__, ha->host_no, rval, mcp->mb[0], mcp->mb[1])); diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 23ee05913fc5..63938d74a571 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1856,7 +1856,7 @@ qla2x00_free_device(scsi_qla_host_t *ha) } if (ha->eft) - qla2x00_trace_control(ha, TC_DISABLE, 0, 0); + qla2x00_disable_eft_trace(ha); ha->flags.online = 0; -- cgit v1.2.3-59-g8ed1b From df613b96077cee826b14089ae6e75eeabf71faa3 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 17 Jan 2008 09:02:17 -0800 Subject: [SCSI] qla2xxx: Add Fibre Channel Event (FCE) tracing support. FCE support enables the firmware to record FC extended link services and basic link services frames which have been transmitted and received by the ISP. This allows for a limited view of the FC traffic through the ISP without using a FC analyzer. This can be useful in situations where a physical connection to the FC bus is not possible. The driver exports this information in two ways -- first, via a debugfs node exported for all supported ISPs under: /qla2xxx/qla2xxx_/fce where a read of the 'fce' file will provide a snapshot of the firmware's FCE buffer; and finally, the FCE buffer will be extracted during a firmware-dump scenario. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/Makefile | 2 +- drivers/scsi/qla2xxx/qla_dbg.c | 22 +++++ drivers/scsi/qla2xxx/qla_dbg.h | 19 +++++ drivers/scsi/qla2xxx/qla_def.h | 10 +++ drivers/scsi/qla2xxx/qla_dfs.c | 175 ++++++++++++++++++++++++++++++++++++++++ drivers/scsi/qla2xxx/qla_fw.h | 7 ++ drivers/scsi/qla2xxx/qla_gbl.h | 13 +++ drivers/scsi/qla2xxx/qla_init.c | 73 ++++++++++++++--- drivers/scsi/qla2xxx/qla_mbx.c | 87 ++++++++++++++++++++ drivers/scsi/qla2xxx/qla_os.c | 11 +++ 10 files changed, 405 insertions(+), 14 deletions(-) create mode 100644 drivers/scsi/qla2xxx/qla_dfs.c diff --git a/drivers/scsi/qla2xxx/Makefile b/drivers/scsi/qla2xxx/Makefile index 71ddb5db4944..c51fd1f86639 100644 --- a/drivers/scsi/qla2xxx/Makefile +++ b/drivers/scsi/qla2xxx/Makefile @@ -1,4 +1,4 @@ qla2xxx-y := qla_os.o qla_init.o qla_mbx.o qla_iocb.o qla_isr.o qla_gs.o \ - qla_dbg.o qla_sup.o qla_attr.o qla_mid.o + qla_dbg.o qla_sup.o qla_attr.o qla_mid.o qla_dfs.o obj-$(CONFIG_SCSI_QLA_FC) += qla2xxx.o diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index 796c4ce87831..d88e98c476b0 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -1051,6 +1051,7 @@ qla25xx_fw_dump(scsi_qla_host_t *ha, int hardware_locked) struct qla25xx_fw_dump *fw; uint32_t ext_mem_cnt; void *nxt; + struct qla2xxx_fce_chain *fcec; risc_address = ext_mem_cnt = 0; flags = 0; @@ -1321,10 +1322,31 @@ qla25xx_fw_dump(scsi_qla_host_t *ha, int hardware_locked) if (rval != QLA_SUCCESS) goto qla25xx_fw_dump_failed_0; + /* Fibre Channel Trace Buffer. */ nxt = qla2xxx_copy_queues(ha, nxt); if (ha->eft) memcpy(nxt, ha->eft, ntohl(ha->fw_dump->eft_size)); + /* Fibre Channel Event Buffer. */ + if (!ha->fce) + goto qla25xx_fw_dump_failed_0; + + ha->fw_dump->version |= __constant_htonl(DUMP_CHAIN_VARIANT); + + fcec = nxt + ntohl(ha->fw_dump->eft_size); + fcec->type = __constant_htonl(DUMP_CHAIN_FCE | DUMP_CHAIN_LAST); + fcec->chain_size = htonl(sizeof(struct qla2xxx_fce_chain) + + fce_calc_size(ha->fce_bufs)); + fcec->size = htonl(fce_calc_size(ha->fce_bufs)); + fcec->addr_l = htonl(LSD(ha->fce_dma)); + fcec->addr_h = htonl(MSD(ha->fce_dma)); + + iter_reg = fcec->eregs; + for (cnt = 0; cnt < 8; cnt++) + *iter_reg++ = htonl(ha->fce_mb[cnt]); + + memcpy(iter_reg, ha->fce, ntohl(fcec->size)); + qla25xx_fw_dump_failed_0: if (rval != QLA_SUCCESS) { qla_printk(KERN_WARNING, ha, diff --git a/drivers/scsi/qla2xxx/qla_dbg.h b/drivers/scsi/qla2xxx/qla_dbg.h index a50ecf0b7c84..524598afc81c 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.h +++ b/drivers/scsi/qla2xxx/qla_dbg.h @@ -256,6 +256,25 @@ struct qla25xx_fw_dump { #define EFT_BYTES_PER_BUFFER 0x4000 #define EFT_SIZE ((EFT_BYTES_PER_BUFFER) * (EFT_NUM_BUFFERS)) +#define FCE_NUM_BUFFERS 64 +#define FCE_BYTES_PER_BUFFER 0x400 +#define FCE_SIZE ((FCE_BYTES_PER_BUFFER) * (FCE_NUM_BUFFERS)) +#define fce_calc_size(b) ((FCE_BYTES_PER_BUFFER) * (b)) + +struct qla2xxx_fce_chain { + uint32_t type; + uint32_t chain_size; + + uint32_t size; + uint32_t addr_l; + uint32_t addr_h; + uint32_t eregs[8]; +}; + +#define DUMP_CHAIN_VARIANT 0x80000000 +#define DUMP_CHAIN_FCE 0x7FFFFAF0 +#define DUMP_CHAIN_LAST 0x80000000 + struct qla2xxx_fw_dump { uint8_t signature[4]; uint32_t version; diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 3f934bdce6ae..6f129da37589 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2156,6 +2156,7 @@ typedef struct scsi_qla_host { uint32_t gpsc_supported :1; uint32_t vsan_enabled :1; uint32_t npiv_supported :1; + uint32_t fce_enabled :1; } flags; atomic_t loop_state; @@ -2449,6 +2450,15 @@ typedef struct scsi_qla_host { dma_addr_t eft_dma; void *eft; + struct dentry *dfs_dir; + struct dentry *dfs_fce; + dma_addr_t fce_dma; + void *fce; + uint32_t fce_bufs; + uint16_t fce_mb[8]; + uint64_t fce_wr, fce_rd; + struct mutex fce_mutex; + uint8_t host_str[16]; uint32_t pci_attr; uint16_t chip_revision; diff --git a/drivers/scsi/qla2xxx/qla_dfs.c b/drivers/scsi/qla2xxx/qla_dfs.c new file mode 100644 index 000000000000..1479c60441c8 --- /dev/null +++ b/drivers/scsi/qla2xxx/qla_dfs.c @@ -0,0 +1,175 @@ +/* + * QLogic Fibre Channel HBA Driver + * Copyright (c) 2003-2005 QLogic Corporation + * + * See LICENSE.qla2xxx for copyright and licensing details. + */ +#include "qla_def.h" + +#include +#include + +static struct dentry *qla2x00_dfs_root; +static atomic_t qla2x00_dfs_root_count; + +static int +qla2x00_dfs_fce_show(struct seq_file *s, void *unused) +{ + scsi_qla_host_t *ha = s->private; + uint32_t cnt; + uint32_t *fce; + uint64_t fce_start; + + mutex_lock(&ha->fce_mutex); + + seq_printf(s, "FCE Trace Buffer\n"); + seq_printf(s, "In Pointer = %llx\n\n", ha->fce_wr); + seq_printf(s, "Base = %llx\n\n", (unsigned long long) ha->fce_dma); + seq_printf(s, "FCE Enable Registers\n"); + seq_printf(s, "%08x %08x %08x %08x %08x %08x\n", + ha->fce_mb[0], ha->fce_mb[2], ha->fce_mb[3], ha->fce_mb[4], + ha->fce_mb[5], ha->fce_mb[6]); + + fce = (uint32_t *) ha->fce; + fce_start = (unsigned long long) ha->fce_dma; + for (cnt = 0; cnt < fce_calc_size(ha->fce_bufs) / 4; cnt++) { + if (cnt % 8 == 0) + seq_printf(s, "\n%llx: ", + (unsigned long long)((cnt * 4) + fce_start)); + else + seq_printf(s, " "); + seq_printf(s, "%08x", *fce++); + } + + seq_printf(s, "\nEnd\n"); + + mutex_unlock(&ha->fce_mutex); + + return 0; +} + +static int +qla2x00_dfs_fce_open(struct inode *inode, struct file *file) +{ + scsi_qla_host_t *ha = inode->i_private; + int rval; + + if (!ha->flags.fce_enabled) + goto out; + + mutex_lock(&ha->fce_mutex); + + /* Pause tracing to flush FCE buffers. */ + rval = qla2x00_disable_fce_trace(ha, &ha->fce_wr, &ha->fce_rd); + if (rval) + qla_printk(KERN_WARNING, ha, + "DebugFS: Unable to disable FCE (%d).\n", rval); + + ha->flags.fce_enabled = 0; + + mutex_unlock(&ha->fce_mutex); +out: + return single_open(file, qla2x00_dfs_fce_show, ha); +} + +static int +qla2x00_dfs_fce_release(struct inode *inode, struct file *file) +{ + scsi_qla_host_t *ha = inode->i_private; + int rval; + + if (ha->flags.fce_enabled) + goto out; + + mutex_lock(&ha->fce_mutex); + + /* Re-enable FCE tracing. */ + ha->flags.fce_enabled = 1; + memset(ha->fce, 0, fce_calc_size(ha->fce_bufs)); + rval = qla2x00_enable_fce_trace(ha, ha->fce_dma, ha->fce_bufs, + ha->fce_mb, &ha->fce_bufs); + if (rval) { + qla_printk(KERN_WARNING, ha, + "DebugFS: Unable to reinitialize FCE (%d).\n", rval); + ha->flags.fce_enabled = 0; + } + + mutex_unlock(&ha->fce_mutex); +out: + return single_release(inode, file); +} + +static const struct file_operations dfs_fce_ops = { + .open = qla2x00_dfs_fce_open, + .read = seq_read, + .llseek = seq_lseek, + .release = qla2x00_dfs_fce_release, +}; + +int +qla2x00_dfs_setup(scsi_qla_host_t *ha) +{ + if (!IS_QLA25XX(ha)) + goto out; + if (!ha->fce) + goto out; + + if (qla2x00_dfs_root) + goto create_dir; + + atomic_set(&qla2x00_dfs_root_count, 0); + qla2x00_dfs_root = debugfs_create_dir(QLA2XXX_DRIVER_NAME, NULL); + if (!qla2x00_dfs_root) { + qla_printk(KERN_NOTICE, ha, + "DebugFS: Unable to create root directory.\n"); + goto out; + } + +create_dir: + if (ha->dfs_dir) + goto create_nodes; + + mutex_init(&ha->fce_mutex); + ha->dfs_dir = debugfs_create_dir(ha->host_str, qla2x00_dfs_root); + if (!ha->dfs_dir) { + qla_printk(KERN_NOTICE, ha, + "DebugFS: Unable to create ha directory.\n"); + goto out; + } + + atomic_inc(&qla2x00_dfs_root_count); + +create_nodes: + ha->dfs_fce = debugfs_create_file("fce", S_IRUSR, ha->dfs_dir, ha, + &dfs_fce_ops); + if (!ha->dfs_fce) { + qla_printk(KERN_NOTICE, ha, + "DebugFS: Unable to fce node.\n"); + goto out; + } +out: + return 0; +} + +int +qla2x00_dfs_remove(scsi_qla_host_t *ha) +{ + if (ha->dfs_fce) { + debugfs_remove(ha->dfs_fce); + ha->dfs_fce = NULL; + } + + if (ha->dfs_dir) { + debugfs_remove(ha->dfs_dir); + ha->dfs_dir = NULL; + atomic_dec(&qla2x00_dfs_root_count); + } + + if (atomic_read(&qla2x00_dfs_root_count) == 0 && + qla2x00_dfs_root) { + debugfs_remove(qla2x00_dfs_root); + qla2x00_dfs_root = NULL; + } + + return 0; +} diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h index ef14bcde712a..9337e138ed63 100644 --- a/drivers/scsi/qla2xxx/qla_fw.h +++ b/drivers/scsi/qla2xxx/qla_fw.h @@ -959,6 +959,13 @@ struct device_reg_24xx { #define TC_EFT_ENABLE 4 #define TC_EFT_DISABLE 5 +#define TC_FCE_ENABLE 8 +#define TC_FCE_OPTIONS 0 +#define TC_FCE_DEFAULT_RX_SIZE 2112 +#define TC_FCE_DEFAULT_TX_SIZE 2112 +#define TC_FCE_DISABLE 9 +#define TC_FCE_DISABLE_TRACE BIT_0 + /* MID Support ***************************************************************/ #define MIN_MULTI_ID_FABRIC 64 /* Must be power-of-2. */ diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index 2fd31fdafcc9..ba35fc26ce6b 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -232,6 +232,13 @@ qla2x00_enable_eft_trace(scsi_qla_host_t *, dma_addr_t, uint16_t); extern int qla2x00_disable_eft_trace(scsi_qla_host_t *); +extern int +qla2x00_enable_fce_trace(scsi_qla_host_t *, dma_addr_t, uint16_t , uint16_t *, + uint32_t *); + +extern int +qla2x00_disable_fce_trace(scsi_qla_host_t *, uint64_t *, uint64_t *); + extern int qla2x00_read_sfp(scsi_qla_host_t *, dma_addr_t, uint16_t, uint16_t, uint16_t); @@ -334,4 +341,10 @@ extern void qla2x00_free_sysfs_attr(scsi_qla_host_t *); extern void qla2x00_init_host_attr(scsi_qla_host_t *); extern void qla2x00_alloc_sysfs_attr(scsi_qla_host_t *); extern void qla2x00_free_sysfs_attr(scsi_qla_host_t *); + +/* + * Global Function Prototypes in qla_dfs.c source file. + */ +extern int qla2x00_dfs_setup(scsi_qla_host_t *); +extern int qla2x00_dfs_remove(scsi_qla_host_t *); #endif /* _QLA_GBL_H */ diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index da2cce011520..cacfd2509387 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -732,9 +732,9 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *ha) { int rval; uint32_t dump_size, fixed_size, mem_size, req_q_size, rsp_q_size, - eft_size; - dma_addr_t eft_dma; - void *eft; + eft_size, fce_size; + dma_addr_t tc_dma; + void *tc; if (ha->fw_dump) { qla_printk(KERN_WARNING, ha, @@ -743,7 +743,7 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *ha) } ha->fw_dumped = 0; - fixed_size = mem_size = eft_size = 0; + fixed_size = mem_size = eft_size = fce_size = 0; if (IS_QLA2100(ha) || IS_QLA2200(ha)) { fixed_size = sizeof(struct qla2100_fw_dump); } else if (IS_QLA23XX(ha)) { @@ -758,20 +758,20 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *ha) sizeof(uint32_t); /* Allocate memory for Extended Trace Buffer. */ - eft = dma_alloc_coherent(&ha->pdev->dev, EFT_SIZE, &eft_dma, + tc = dma_alloc_coherent(&ha->pdev->dev, EFT_SIZE, &tc_dma, GFP_KERNEL); - if (!eft) { + if (!tc) { qla_printk(KERN_WARNING, ha, "Unable to allocate " "(%d KB) for EFT.\n", EFT_SIZE / 1024); goto cont_alloc; } - rval = qla2x00_enable_eft_trace(ha, eft_dma, EFT_NUM_BUFFERS); + rval = qla2x00_enable_eft_trace(ha, tc_dma, EFT_NUM_BUFFERS); if (rval) { qla_printk(KERN_WARNING, ha, "Unable to initialize " "EFT (%d).\n", rval); - dma_free_coherent(&ha->pdev->dev, EFT_SIZE, eft, - eft_dma); + dma_free_coherent(&ha->pdev->dev, EFT_SIZE, tc, + tc_dma); goto cont_alloc; } @@ -779,9 +779,41 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *ha) EFT_SIZE / 1024); eft_size = EFT_SIZE; - memset(eft, 0, eft_size); - ha->eft_dma = eft_dma; - ha->eft = eft; + memset(tc, 0, eft_size); + ha->eft_dma = tc_dma; + ha->eft = tc; + + /* Allocate memory for Fibre Channel Event Buffer. */ + if (!IS_QLA25XX(ha)) + goto cont_alloc; + + tc = dma_alloc_coherent(&ha->pdev->dev, FCE_SIZE, &tc_dma, + GFP_KERNEL); + if (!tc) { + qla_printk(KERN_WARNING, ha, "Unable to allocate " + "(%d KB) for FCE.\n", FCE_SIZE / 1024); + goto cont_alloc; + } + + memset(tc, 0, FCE_SIZE); + rval = qla2x00_enable_fce_trace(ha, tc_dma, FCE_NUM_BUFFERS, + ha->fce_mb, &ha->fce_bufs); + if (rval) { + qla_printk(KERN_WARNING, ha, "Unable to initialize " + "FCE (%d).\n", rval); + dma_free_coherent(&ha->pdev->dev, FCE_SIZE, tc, + tc_dma); + ha->flags.fce_enabled = 0; + goto cont_alloc; + } + + qla_printk(KERN_INFO, ha, "Allocated (%d KB) for FCE...\n", + FCE_SIZE / 1024); + + fce_size = sizeof(struct qla2xxx_fce_chain) + EFT_SIZE; + ha->flags.fce_enabled = 1; + ha->fce_dma = tc_dma; + ha->fce = tc; } cont_alloc: req_q_size = ha->request_q_length * sizeof(request_t); @@ -789,7 +821,7 @@ cont_alloc: dump_size = offsetof(struct qla2xxx_fw_dump, isp); dump_size += fixed_size + mem_size + req_q_size + rsp_q_size + - eft_size; + eft_size + fce_size; ha->fw_dump = vmalloc(dump_size); if (!ha->fw_dump) { @@ -3247,6 +3279,21 @@ qla2x00_abort_isp(scsi_qla_host_t *ha) "(%d).\n", rval); } } + + if (ha->fce) { + ha->flags.fce_enabled = 1; + memset(ha->fce, 0, + fce_calc_size(ha->fce_bufs)); + rval = qla2x00_enable_fce_trace(ha, + ha->fce_dma, ha->fce_bufs, ha->fce_mb, + &ha->fce_bufs); + if (rval) { + qla_printk(KERN_WARNING, ha, + "Unable to reinitialize FCE " + "(%d).\n", rval); + ha->flags.fce_enabled = 0; + } + } } else { /* failed the ISP abort */ ha->flags.online = 1; if (test_bit(ISP_ABORT_RETRY, &ha->dpc_flags)) { diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 7c6aa4ec8f4f..99d29fff836d 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -2414,6 +2414,93 @@ qla2x00_disable_eft_trace(scsi_qla_host_t *ha) return rval; } +int +qla2x00_enable_fce_trace(scsi_qla_host_t *ha, dma_addr_t fce_dma, + uint16_t buffers, uint16_t *mb, uint32_t *dwords) +{ + int rval; + mbx_cmd_t mc; + mbx_cmd_t *mcp = &mc; + + if (!IS_QLA25XX(ha)) + return QLA_FUNCTION_FAILED; + + DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); + + mcp->mb[0] = MBC_TRACE_CONTROL; + mcp->mb[1] = TC_FCE_ENABLE; + mcp->mb[2] = LSW(fce_dma); + mcp->mb[3] = MSW(fce_dma); + mcp->mb[4] = LSW(MSD(fce_dma)); + mcp->mb[5] = MSW(MSD(fce_dma)); + mcp->mb[6] = buffers; + mcp->mb[7] = TC_AEN_DISABLE; + mcp->mb[8] = 0; + mcp->mb[9] = TC_FCE_DEFAULT_RX_SIZE; + mcp->mb[10] = TC_FCE_DEFAULT_TX_SIZE; + mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2| + MBX_1|MBX_0; + mcp->in_mb = MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; + mcp->tov = 30; + mcp->flags = 0; + rval = qla2x00_mailbox_command(ha, mcp); + if (rval != QLA_SUCCESS) { + DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n", + __func__, ha->host_no, rval, mcp->mb[0], mcp->mb[1])); + } else { + DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); + + if (mb) + memcpy(mb, mcp->mb, 8 * sizeof(*mb)); + if (dwords) + *dwords = mcp->mb[6]; + } + + return rval; +} + +int +qla2x00_disable_fce_trace(scsi_qla_host_t *ha, uint64_t *wr, uint64_t *rd) +{ + int rval; + mbx_cmd_t mc; + mbx_cmd_t *mcp = &mc; + + if (!IS_FWI2_CAPABLE(ha)) + return QLA_FUNCTION_FAILED; + + DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); + + mcp->mb[0] = MBC_TRACE_CONTROL; + mcp->mb[1] = TC_FCE_DISABLE; + mcp->mb[2] = TC_FCE_DISABLE_TRACE; + mcp->out_mb = MBX_2|MBX_1|MBX_0; + mcp->in_mb = MBX_9|MBX_8|MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2| + MBX_1|MBX_0; + mcp->tov = 30; + mcp->flags = 0; + rval = qla2x00_mailbox_command(ha, mcp); + if (rval != QLA_SUCCESS) { + DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x mb[1]=%x.\n", + __func__, ha->host_no, rval, mcp->mb[0], mcp->mb[1])); + } else { + DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no)); + + if (wr) + *wr = (uint64_t) mcp->mb[5] << 48 | + (uint64_t) mcp->mb[4] << 32 | + (uint64_t) mcp->mb[3] << 16 | + (uint64_t) mcp->mb[2]; + if (rd) + *rd = (uint64_t) mcp->mb[9] << 48 | + (uint64_t) mcp->mb[8] << 32 | + (uint64_t) mcp->mb[7] << 16 | + (uint64_t) mcp->mb[6]; + } + + return rval; +} + int qla2x00_read_sfp(scsi_qla_host_t *ha, dma_addr_t sfp_dma, uint16_t addr, uint16_t off, uint16_t count) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 63938d74a571..8d1408e18efd 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1791,6 +1791,8 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) qla2x00_init_host_attr(ha); + qla2x00_dfs_setup(ha); + qla_printk(KERN_INFO, ha, "\n" " QLogic Fibre Channel HBA Driver: %s\n" " QLogic %s - %s\n" @@ -1822,6 +1824,8 @@ qla2x00_remove_one(struct pci_dev *pdev) ha = pci_get_drvdata(pdev); + qla2x00_dfs_remove(ha); + qla2x00_free_sysfs_attr(ha); fc_remove_host(ha->host); @@ -1855,6 +1859,9 @@ qla2x00_free_device(scsi_qla_host_t *ha) kthread_stop(t); } + if (ha->flags.fce_enabled) + qla2x00_disable_fce_trace(ha, NULL, NULL); + if (ha->eft) qla2x00_disable_eft_trace(ha); @@ -2212,6 +2219,10 @@ qla2x00_mem_free(scsi_qla_host_t *ha) /* free sp pool */ qla2x00_free_sp_pool(ha); + if (ha->fce) + dma_free_coherent(&ha->pdev->dev, FCE_SIZE, ha->fce, + ha->fce_dma); + if (ha->fw_dump) { if (ha->eft) dma_free_coherent(&ha->pdev->dev, -- cgit v1.2.3-59-g8ed1b From fc44765f5a232d451fa58a04606b254ac257b429 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 17 Jan 2008 09:02:18 -0800 Subject: [SCSI] qla2xxx: Correct late-memset() of EFT buffer. Original code would clear the buffer after the firmware had already been initialized to use the buffer, thus potentially and inadvertantly clearing data previously DMA'd by the firmware. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index cacfd2509387..7637fa7546b5 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -766,6 +766,7 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *ha) goto cont_alloc; } + memset(tc, 0, EFT_SIZE); rval = qla2x00_enable_eft_trace(ha, tc_dma, EFT_NUM_BUFFERS); if (rval) { qla_printk(KERN_WARNING, ha, "Unable to initialize " @@ -779,7 +780,6 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *ha) EFT_SIZE / 1024); eft_size = EFT_SIZE; - memset(tc, 0, eft_size); ha->eft_dma = tc_dma; ha->eft = tc; -- cgit v1.2.3-59-g8ed1b From c48339decceec8e011498b0fc4c7c7d8b2ea06c1 Mon Sep 17 00:00:00 2001 From: Seokmann Ju Date: Thu, 17 Jan 2008 09:02:19 -0800 Subject: [SCSI] qla2xxx: Issue correct MBC_INITIALIZE_FIRMWARE command. There is a case where 54xx HBA loads MID firmware as it use 24xx firmware. In this case, the driver should issue MBC_MID_INITIALIZE FIRMWARE even though the HBA doesn't support NPIV. This patch make changes in the driver so that could behave accordingly. Signed-off-by: Seokmann Ju Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_init.c | 4 +++- drivers/scsi/qla2xxx/qla_mbx.c | 2 +- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 7637fa7546b5..d0633ca894be 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -1193,7 +1193,9 @@ qla2x00_init_rings(scsi_qla_host_t *ha) DEBUG(printk("scsi(%ld): Issue init firmware.\n", ha->host_no)); - mid_init_cb->count = cpu_to_le16(ha->max_npiv_vports); + if (ha->flags.npiv_supported) + mid_init_cb->count = cpu_to_le16(ha->max_npiv_vports); + mid_init_cb->options = __constant_cpu_to_le16(BIT_1); rval = qla2x00_init_firmware(ha, ha->init_cb_size); diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 99d29fff836d..0c10c0b0fb73 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -980,7 +980,7 @@ qla2x00_init_firmware(scsi_qla_host_t *ha, uint16_t size) DEBUG11(printk("qla2x00_init_firmware(%ld): entered.\n", ha->host_no)); - if (ha->flags.npiv_supported) + if (ha->fw_attributes & BIT_2) mcp->mb[0] = MBC_MID_INITIALIZE_FIRMWARE; else mcp->mb[0] = MBC_INITIALIZE_FIRMWARE; -- cgit v1.2.3-59-g8ed1b From 0c27f5bd00aba65a2a3313859ebce1c77c90000e Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 17 Jan 2008 09:02:20 -0800 Subject: [SCSI] qla2xxx: Update version number to 8.02.00-k7. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index 6e3dc40e9c9d..2c2f6b4697c7 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.02.00-k6" +#define QLA2XXX_VERSION "8.02.00-k7" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 2 -- cgit v1.2.3-59-g8ed1b From 2ca39c48ea0d2fd265479d0b62f2ac8878900360 Mon Sep 17 00:00:00 2001 From: "Salyzyn, Mark" Date: Thu, 17 Jan 2008 09:24:56 -0800 Subject: [SCSI] aacraid: add new driver features flags Feature enhancement, adding a 'flags' entry that will reside in the host controller's tree, with a newline separated list of arbitrary ascii named features that indicate whether the combination of driver and controller has support for said feature. Breaking from the one-line output typical of sysfs entries, newline was added to tailor for grep, or simple gets line by line string match within an application. I added one for a compiler time check for existence of debug print output, one for an optional manifest defined enhanced status reporting in the logs, and one for runtime reporting whether the controller and driver supports arrays larger than 2TB. Adaptec's storage management software uses the last flag to determine whether to make available the creation of arrays larger than 2TB, otherwise a warning is posted. Signed-off-by: Mark Salyzyn Signed-off-by: James Bottomley --- drivers/scsi/aacraid/linit.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 6650f6fa9890..5ab733d4faf4 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -790,6 +790,23 @@ static ssize_t aac_show_vendor(struct class_device *class_dev, return len; } +static ssize_t aac_show_flags(struct class_device *class_dev, char *buf) +{ + int len = 0; + struct aac_dev *dev = (struct aac_dev*)class_to_shost(class_dev)->hostdata; + + if (nblank(dprintk(x))) + len = snprintf(buf, PAGE_SIZE, "dprintk\n"); +#ifdef AAC_DETAILED_STATUS_INFO + len += snprintf(buf + len, PAGE_SIZE - len, + "AAC_DETAILED_STATUS_INFO\n"); +#endif + if (dev->raw_io_interface && dev->raw_io_64) + len += snprintf(buf + len, PAGE_SIZE - len, + "SAI_READ_CAPACITY_16\n"); + return len; +} + static ssize_t aac_show_kernel_version(struct class_device *class_dev, char *buf) { @@ -899,6 +916,13 @@ static struct class_device_attribute aac_vendor = { }, .show = aac_show_vendor, }; +static struct class_device_attribute aac_flags = { + .attr = { + .name = "flags", + .mode = S_IRUGO, + }, + .show = aac_show_flags, +}; static struct class_device_attribute aac_kernel_version = { .attr = { .name = "hba_kernel_version", @@ -953,6 +977,7 @@ static struct class_device_attribute aac_reset = { static struct class_device_attribute *aac_attrs[] = { &aac_model, &aac_vendor, + &aac_flags, &aac_kernel_version, &aac_monitor_version, &aac_bios_version, -- cgit v1.2.3-59-g8ed1b From cb1042f285c2168bd8cf10aca0e24802e682252b Mon Sep 17 00:00:00 2001 From: "Salyzyn, Mark" Date: Thu, 17 Jan 2008 09:25:07 -0800 Subject: [SCSI] aacraid: add Voodoo Lite class of cards. The cards being added are supported in a limited sense already through family matching, but we needed to add some functionality to the driver to expose selectively the physical drives. These Physical drives are specifically marked to not be part of any array and thus are declared JBODs (Just a Bunch Of Drives) for generic SCSI access. We report that this is the second patch in a set of two, but merely depends on the stand-alone functionality of the first patch which adds in that case the ability to report a driver feature flag via sysfs. We leverage that functionality by reporting that this driver now supports this new JBOD feature for the controller so that the array management applications may react accordingly and guide the user as they manage the controller. Signed-off-by: Mark Salyzyn Signed-off-by: James Bottomley --- Documentation/scsi/aacraid.txt | 4 ++++ drivers/scsi/aacraid/aachba.c | 5 ++++- drivers/scsi/aacraid/aacraid.h | 6 +++++- drivers/scsi/aacraid/commsup.c | 24 ++++++++++++++++++++++++ drivers/scsi/aacraid/linit.c | 15 +++++++++++---- 5 files changed, 48 insertions(+), 6 deletions(-) diff --git a/Documentation/scsi/aacraid.txt b/Documentation/scsi/aacraid.txt index a8257840695a..d16011a8618e 100644 --- a/Documentation/scsi/aacraid.txt +++ b/Documentation/scsi/aacraid.txt @@ -56,6 +56,10 @@ Supported Cards/Chipsets 9005:0285:9005:02d1 Adaptec 5405 (Voodoo40) 9005:0285:15d9:02d2 SMC AOC-USAS-S8i-LP 9005:0285:15d9:02d3 SMC AOC-USAS-S8iR-LP + 9005:0285:9005:02d4 Adaptec 2045 (Voodoo04 Lite) + 9005:0285:9005:02d5 Adaptec 2405 (Voodoo40 Lite) + 9005:0285:9005:02d6 Adaptec 2445 (Voodoo44 Lite) + 9005:0285:9005:02d7 Adaptec 2805 (Voodoo80 Lite) 1011:0046:9005:0364 Adaptec 5400S (Mustang) 9005:0287:9005:0800 Adaptec Themisto (Jupiter) 9005:0200:9005:0200 Adaptec Themisto (Jupiter) diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index 8d7b7703ee2a..d7235f42cf5f 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -1339,6 +1339,8 @@ int aac_get_adapter_info(struct aac_dev* dev) } dev->cache_protected = 0; + dev->jbod = ((dev->supplement_adapter_info.FeatureBits & + AAC_FEATURE_JBOD) != 0); dev->nondasd_support = 0; dev->raid_scsi_mode = 0; if(dev->adapter_info.options & AAC_OPT_NONDASD) @@ -1923,7 +1925,8 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd) } } } else { /* check for physical non-dasd devices */ - if ((dev->nondasd_support == 1) || expose_physicals) { + if (dev->nondasd_support || expose_physicals || + dev->jbod) { if (dev->in_reset) return -1; return aac_send_srb_fib(scsicmd); diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 8a5b9c898e5b..3195d29f2177 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -12,7 +12,7 @@ *----------------------------------------------------------------------------*/ #ifndef AAC_DRIVER_BUILD -# define AAC_DRIVER_BUILD 2454 +# define AAC_DRIVER_BUILD 2455 # define AAC_DRIVER_BRANCH "-ms" #endif #define MAXIMUM_NUM_CONTAINERS 32 @@ -866,6 +866,7 @@ struct aac_supplement_adapter_info __le32 ReservedGrowth[1]; }; #define AAC_FEATURE_FALCON cpu_to_le32(0x00000010) +#define AAC_FEATURE_JBOD cpu_to_le32(0x08000000) #define AAC_OPTION_MU_RESET cpu_to_le32(0x00000001) #define AAC_OPTION_IGNORE_RESET cpu_to_le32(0x00000002) #define AAC_SIS_VERSION_V3 3 @@ -1012,6 +1013,7 @@ struct aac_dev * lets break them out so we don't have to do an AND to check them */ u8 nondasd_support; + u8 jbod; u8 cache_protected; u8 dac_support; u8 raid_scsi_mode; @@ -1777,6 +1779,8 @@ extern struct aac_common aac_config; #define AifEnExpEvent 23 /* Firmware Event Log */ #define AifExeFirmwarePanic 3 /* Firmware Event Panic */ #define AifHighPriority 3 /* Highest Priority Event */ +#define AifEnAddJBOD 30 /* JBOD created */ +#define AifEnDeleteJBOD 31 /* JBOD deleted */ #define AifCmdJobProgress 2 /* Progress report */ #define AifJobCtrZero 101 /* Array Zero progress */ diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index 1dd2e57c3345..81b36923e0ef 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -901,7 +901,31 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr) case AifEnConfigChange: break; + case AifEnAddJBOD: + case AifEnDeleteJBOD: + container = le32_to_cpu(((__le32 *)aifcmd->data)[1]); + if ((container >> 28)) + break; + channel = (container >> 24) & 0xF; + if (channel >= dev->maximum_num_channels) + break; + id = container & 0xFFFF; + if (id >= dev->maximum_num_physicals) + break; + lun = (container >> 16) & 0xFF; + channel = aac_phys_to_logical(channel); + device_config_needed = + (((__le32 *)aifcmd->data)[0] == + cpu_to_le32(AifEnAddJBOD)) ? ADD : DELETE; + break; + case AifEnEnclosureManagement: + /* + * If in JBOD mode, automatic exposure of new + * physical target to be suppressed until configured. + */ + if (dev->jbod) + break; switch (le32_to_cpu(((__le32 *)aifcmd->data)[3])) { case EM_DRIVE_INSERTION: case EM_DRIVE_REMOVAL: diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 5ab733d4faf4..61be22774e99 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -404,6 +404,7 @@ static int aac_slave_configure(struct scsi_device *sdev) struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata; if ((sdev->type == TYPE_DISK) && (sdev_channel(sdev) != CONTAINER_CHANNEL) && + (!aac->jbod || sdev->inq_periph_qual) && (!aac->raid_scsi_mode || (sdev_channel(sdev) != 2))) { if (expose_physicals == 0) return -ENXIO; @@ -411,7 +412,8 @@ static int aac_slave_configure(struct scsi_device *sdev) sdev->no_uld_attach = 1; } if (sdev->tagged_supported && (sdev->type == TYPE_DISK) && - (sdev_channel(sdev) == CONTAINER_CHANNEL)) { + (!aac->raid_scsi_mode || (sdev_channel(sdev) != 2)) && + !sdev->no_uld_attach) { struct scsi_device * dev; struct Scsi_Host *host = sdev->host; unsigned num_lsu = 0; @@ -430,8 +432,11 @@ static int aac_slave_configure(struct scsi_device *sdev) ++num_lsu; __shost_for_each_device(dev, host) { if (dev->tagged_supported && (dev->type == TYPE_DISK) && - (sdev_channel(dev) == CONTAINER_CHANNEL)) { - if (!aac->fsa_dev[sdev_id(dev)].valid) + (!aac->raid_scsi_mode || + (sdev_channel(sdev) != 2)) && + !dev->no_uld_attach) { + if ((sdev_channel(dev) != CONTAINER_CHANNEL) + || !aac->fsa_dev[sdev_id(dev)].valid) ++num_lsu; } else ++num_one; @@ -804,6 +809,8 @@ static ssize_t aac_show_flags(struct class_device *class_dev, char *buf) if (dev->raw_io_interface && dev->raw_io_64) len += snprintf(buf + len, PAGE_SIZE - len, "SAI_READ_CAPACITY_16\n"); + if (dev->jbod) + len += snprintf(buf + len, PAGE_SIZE - len, "SUPPORTED_JBOD\n"); return len; } @@ -1157,7 +1164,7 @@ static int __devinit aac_probe_one(struct pci_dev *pdev, * all containers are on the virtual channel 0 (CONTAINER_CHANNEL) * physical channels are address by their actual physical number+1 */ - if ((aac->nondasd_support == 1) || expose_physicals) + if (aac->nondasd_support || expose_physicals || aac->jbod) shost->max_channel = aac->maximum_num_channels; else shost->max_channel = 0; -- cgit v1.2.3-59-g8ed1b From b523381e325366cc54a2548df418c2a427b2f2ee Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 18 Jan 2008 17:47:56 -0600 Subject: [SCSI] fix pcmcia compile problem This patch commit 8ae732a91df051aba6820068a47b631a06599d84 Author: Tejun Heo Date: Fri Dec 7 22:36:23 2007 +0900 [SCSI] make pcmcia directory use obj-y|m instead of subdir-y|m Moved the scsi Makefile into conformance, but also caused the pcmcia subdirectory to get built in for the first time, leading to duplicate symbols in an allyesconfig build. Since evidently no-one relies on these being built in, fix this by ensuring they can only be built as modules. Acked-by: Tejun Heo Signed-off-by: James Bottomley --- drivers/scsi/pcmcia/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/pcmcia/Kconfig b/drivers/scsi/pcmcia/Kconfig index fa481b515ead..53857c6b6d4d 100644 --- a/drivers/scsi/pcmcia/Kconfig +++ b/drivers/scsi/pcmcia/Kconfig @@ -6,7 +6,8 @@ menuconfig SCSI_LOWLEVEL_PCMCIA bool "PCMCIA SCSI adapter support" depends on SCSI!=n && PCMCIA!=n -if SCSI_LOWLEVEL_PCMCIA && SCSI && PCMCIA +# drivers have problems when build in, so require modules +if SCSI_LOWLEVEL_PCMCIA && SCSI && PCMCIA && m config PCMCIA_AHA152X tristate "Adaptec AHA152X PCMCIA support" -- cgit v1.2.3-59-g8ed1b From a0899d4df534d2bcf671b0f647b809842309a9ae Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 20 Jan 2008 11:12:26 +0100 Subject: [SCSI] sd: add fix for devices with last sector access problems This patch adds a new scsi_device flag (last_sector_bug) for devices which contain a bug where the device crashes when the last sector is read in a larger then 1 sector read. This is for example the case with sdcards in the HP PSC1350 printer cardreader and in the HP PSC1610 printer cardreader. Signed-off-by: Hans de Goede Signed-off-by: James Bottomley --- drivers/scsi/sd.c | 9 +++++++++ include/scsi/scsi_device.h | 1 + 2 files changed, 10 insertions(+) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 212f6bcfd457..24eba3118b5a 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -395,6 +395,15 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) goto out; } + /* + * Some devices (some sdcards for one) don't like it if the + * last sector gets read in a larger then 1 sector read. + */ + if (unlikely(sdp->last_sector_bug && + rq->nr_sectors > sdp->sector_size / 512 && + block + this_count == get_capacity(disk))) + this_count -= sdp->sector_size / 512; + SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, "block=%llu\n", (unsigned long long)block)); diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index e0c645ac5014..3c8f898b160e 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -139,6 +139,7 @@ struct scsi_device { unsigned fix_capacity:1; /* READ_CAPACITY is too high by 1 */ unsigned guess_capacity:1; /* READ_CAPACITY might be too high by 1 */ unsigned retry_hwerror:1; /* Retry HARDWARE_ERROR */ + unsigned last_sector_bug:1; /* Always read last sector in a 1 sector read */ DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */ struct list_head event_list; /* asserted events */ -- cgit v1.2.3-59-g8ed1b From b30c2fc1113edfb2371427c10503ff942b0a0370 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sun, 20 Jan 2008 09:09:40 -0600 Subject: [SCSI] scsi.h: add macro for enclosure bit of inquiry data The macro tells us whether the device is (or contains) an enclosure device. Signed-off-by: James Bottomley --- include/scsi/scsi_device.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 3c8f898b160e..ab7acbe80960 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -387,6 +387,10 @@ static inline int scsi_device_qas(struct scsi_device *sdev) return 0; return sdev->inquiry[56] & 0x02; } +static inline int scsi_device_enclosure(struct scsi_device *sdev) +{ + return sdev->inquiry[6] & (1<<6); +} #define MODULE_ALIAS_SCSI_DEVICE(type) \ MODULE_ALIAS("scsi:t-" __stringify(type) "*") -- cgit v1.2.3-59-g8ed1b From de25deb18016f66dcdede165d07654559bb332bc Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Wed, 16 Jan 2008 13:32:17 +0900 Subject: [SCSI] use dynamically allocated sense buffer This removes static array sense_buffer in scsi_cmnd and uses dynamically allocated sense_buffer (with GFP_DMA). The reason for doing this is that some architectures need cacheline aligned buffer for DMA: http://lkml.org/lkml/2007/11/19/2 The problems are that scsi_eh_prep_cmnd puts scsi_cmnd::sense_buffer to sglist and some LLDs directly DMA to scsi_cmnd::sense_buffer. It's necessary to DMA to scsi_cmnd::sense_buffer safely. This patch solves these issues. __scsi_get_command allocates sense_buffer via kmem_cache_alloc and attaches it to a scsi_cmnd so everything just work as before. Signed-off-by: FUJITA Tomonori Signed-off-by: James Bottomley --- drivers/scsi/hosts.c | 9 ++++++- drivers/scsi/scsi.c | 61 ++++++++++++++++++++++++++++++++++++++++++++++-- drivers/scsi/scsi_priv.h | 2 ++ include/scsi/scsi_cmnd.h | 2 +- 4 files changed, 70 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index 9a10b4335e76..f5d3fbb55717 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -268,6 +268,7 @@ static void scsi_host_dev_release(struct device *dev) } scsi_destroy_command_freelist(shost); + scsi_destroy_command_sense_buffer(shost); if (shost->bqt) blk_free_tags(shost->bqt); @@ -372,10 +373,14 @@ struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize) else shost->dma_boundary = 0xffffffff; - rval = scsi_setup_command_freelist(shost); + rval = scsi_setup_command_sense_buffer(shost); if (rval) goto fail_kfree; + rval = scsi_setup_command_freelist(shost); + if (rval) + goto fail_destroy_sense; + device_initialize(&shost->shost_gendev); snprintf(shost->shost_gendev.bus_id, BUS_ID_SIZE, "host%d", shost->host_no); @@ -399,6 +404,8 @@ struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize) fail_destroy_freelist: scsi_destroy_command_freelist(shost); + fail_destroy_sense: + scsi_destroy_command_sense_buffer(shost); fail_kfree: kfree(shost); return NULL; diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 54ff611b8677..0a4a5b8b87c6 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -161,6 +161,9 @@ static struct scsi_host_cmd_pool scsi_cmd_dma_pool = { static DEFINE_MUTEX(host_cmd_pool_mutex); +static struct kmem_cache *sense_buffer_slab; +static int sense_buffer_slab_users; + /** * __scsi_get_command - Allocate a struct scsi_cmnd * @shost: host to transmit command @@ -172,6 +175,7 @@ static DEFINE_MUTEX(host_cmd_pool_mutex); struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *shost, gfp_t gfp_mask) { struct scsi_cmnd *cmd; + unsigned char *buf; cmd = kmem_cache_alloc(shost->cmd_pool->slab, gfp_mask | shost->cmd_pool->gfp_mask); @@ -186,6 +190,21 @@ struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *shost, gfp_t gfp_mask) list_del_init(&cmd->list); } spin_unlock_irqrestore(&shost->free_list_lock, flags); + + if (cmd) { + buf = cmd->sense_buffer; + memset(cmd, 0, sizeof(*cmd)); + cmd->sense_buffer = buf; + } + } else { + buf = kmem_cache_alloc(sense_buffer_slab, __GFP_DMA|gfp_mask); + if (likely(buf)) { + memset(cmd, 0, sizeof(*cmd)); + cmd->sense_buffer = buf; + } else { + kmem_cache_free(shost->cmd_pool->slab, cmd); + cmd = NULL; + } } return cmd; @@ -212,7 +231,6 @@ struct scsi_cmnd *scsi_get_command(struct scsi_device *dev, gfp_t gfp_mask) if (likely(cmd != NULL)) { unsigned long flags; - memset(cmd, 0, sizeof(*cmd)); cmd->device = dev; init_timer(&cmd->eh_timeout); INIT_LIST_HEAD(&cmd->list); @@ -246,8 +264,10 @@ void __scsi_put_command(struct Scsi_Host *shost, struct scsi_cmnd *cmd, } spin_unlock_irqrestore(&shost->free_list_lock, flags); - if (likely(cmd != NULL)) + if (likely(cmd != NULL)) { + kmem_cache_free(sense_buffer_slab, cmd->sense_buffer); kmem_cache_free(shost->cmd_pool->slab, cmd); + } put_device(dev); } @@ -290,6 +310,7 @@ int scsi_setup_command_freelist(struct Scsi_Host *shost) { struct scsi_host_cmd_pool *pool; struct scsi_cmnd *cmd; + unsigned char *sense_buffer; spin_lock_init(&shost->free_list_lock); INIT_LIST_HEAD(&shost->free_list); @@ -319,9 +340,18 @@ int scsi_setup_command_freelist(struct Scsi_Host *shost) GFP_KERNEL | shost->cmd_pool->gfp_mask); if (!cmd) goto fail2; + + sense_buffer = kmem_cache_alloc(sense_buffer_slab, + GFP_KERNEL | __GFP_DMA); + if (!sense_buffer) + goto destroy_backup; + + cmd->sense_buffer = sense_buffer; list_add(&cmd->list, &shost->free_list); return 0; +destroy_backup: + kmem_cache_free(shost->cmd_pool->slab, cmd); fail2: mutex_lock(&host_cmd_pool_mutex); if (!--pool->users) @@ -342,6 +372,7 @@ void scsi_destroy_command_freelist(struct Scsi_Host *shost) cmd = list_entry(shost->free_list.next, struct scsi_cmnd, list); list_del_init(&cmd->list); + kmem_cache_free(sense_buffer_slab, cmd->sense_buffer); kmem_cache_free(shost->cmd_pool->slab, cmd); } @@ -351,6 +382,32 @@ void scsi_destroy_command_freelist(struct Scsi_Host *shost) mutex_unlock(&host_cmd_pool_mutex); } +int scsi_setup_command_sense_buffer(struct Scsi_Host *shost) +{ + mutex_lock(&host_cmd_pool_mutex); + if (!sense_buffer_slab_users) { + sense_buffer_slab = kmem_cache_create("scsi_sense_buffer", + SCSI_SENSE_BUFFERSIZE, + 0, SLAB_CACHE_DMA, NULL); + if (!sense_buffer_slab) { + mutex_unlock(&host_cmd_pool_mutex); + return -ENOMEM; + } + } + sense_buffer_slab_users++; + mutex_unlock(&host_cmd_pool_mutex); + + return 0; +} + +void scsi_destroy_command_sense_buffer(struct Scsi_Host *shost) +{ + mutex_lock(&host_cmd_pool_mutex); + if (!--sense_buffer_slab_users) + kmem_cache_destroy(sense_buffer_slab); + mutex_unlock(&host_cmd_pool_mutex); +} + #ifdef CONFIG_SCSI_LOGGING void scsi_log_send(struct scsi_cmnd *cmd) { diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h index 3f34e9376b0a..55c6f71a9aee 100644 --- a/drivers/scsi/scsi_priv.h +++ b/drivers/scsi/scsi_priv.h @@ -27,6 +27,8 @@ extern void scsi_exit_hosts(void); extern int scsi_dispatch_cmd(struct scsi_cmnd *cmd); extern int scsi_setup_command_freelist(struct Scsi_Host *shost); extern void scsi_destroy_command_freelist(struct Scsi_Host *shost); +extern int scsi_setup_command_sense_buffer(struct Scsi_Host *shost); +extern void scsi_destroy_command_sense_buffer(struct Scsi_Host *shost); extern void __scsi_done(struct scsi_cmnd *cmd); #ifdef CONFIG_SCSI_LOGGING void scsi_log_send(struct scsi_cmnd *cmd); diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h index 3f47e522a1ec..abd7479ff452 100644 --- a/include/scsi/scsi_cmnd.h +++ b/include/scsi/scsi_cmnd.h @@ -88,7 +88,7 @@ struct scsi_cmnd { working on */ #define SCSI_SENSE_BUFFERSIZE 96 - unsigned char sense_buffer[SCSI_SENSE_BUFFERSIZE]; + unsigned char *sense_buffer; /* obtained by REQUEST SENSE when * CHECK CONDITION is received on original * command (auto-sense) */ -- cgit v1.2.3-59-g8ed1b From 5b7f16804ad90e7f7a10c05b6a2e782598d9745a Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sun, 20 Jan 2008 09:28:24 -0600 Subject: [SCSI] don't use __GFP_DMA for sense buffers if not required Only hosts which actually have ISA DMA requirements need sense buffers coming out of ZONE_DMA, so only use the __GFP_DMA flag for that case to avoid allocating this scarce resource if it's not necessary. [tomo: fixed slab leak in failure case] Acked-by: FUJITA Tomonori Signed-off-by: James Bottomley --- drivers/scsi/hosts.c | 9 +--- drivers/scsi/scsi.c | 111 +++++++++++++++++++++-------------------------- drivers/scsi/scsi_priv.h | 2 - 3 files changed, 51 insertions(+), 71 deletions(-) diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index f5d3fbb55717..9a10b4335e76 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -268,7 +268,6 @@ static void scsi_host_dev_release(struct device *dev) } scsi_destroy_command_freelist(shost); - scsi_destroy_command_sense_buffer(shost); if (shost->bqt) blk_free_tags(shost->bqt); @@ -373,13 +372,9 @@ struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize) else shost->dma_boundary = 0xffffffff; - rval = scsi_setup_command_sense_buffer(shost); - if (rval) - goto fail_kfree; - rval = scsi_setup_command_freelist(shost); if (rval) - goto fail_destroy_sense; + goto fail_kfree; device_initialize(&shost->shost_gendev); snprintf(shost->shost_gendev.bus_id, BUS_ID_SIZE, "host%d", @@ -404,8 +399,6 @@ struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize) fail_destroy_freelist: scsi_destroy_command_freelist(shost); - fail_destroy_sense: - scsi_destroy_command_sense_buffer(shost); fail_kfree: kfree(shost); return NULL; diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 0a4a5b8b87c6..1a9fba6a9f92 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -141,29 +141,30 @@ const char * scsi_device_type(unsigned type) EXPORT_SYMBOL(scsi_device_type); struct scsi_host_cmd_pool { - struct kmem_cache *slab; - unsigned int users; - char *name; - unsigned int slab_flags; - gfp_t gfp_mask; + struct kmem_cache *cmd_slab; + struct kmem_cache *sense_slab; + unsigned int users; + char *cmd_name; + char *sense_name; + unsigned int slab_flags; + gfp_t gfp_mask; }; static struct scsi_host_cmd_pool scsi_cmd_pool = { - .name = "scsi_cmd_cache", + .cmd_name = "scsi_cmd_cache", + .sense_name = "scsi_sense_cache", .slab_flags = SLAB_HWCACHE_ALIGN, }; static struct scsi_host_cmd_pool scsi_cmd_dma_pool = { - .name = "scsi_cmd_cache(DMA)", + .cmd_name = "scsi_cmd_cache(DMA)", + .sense_name = "scsi_sense_cache(DMA)", .slab_flags = SLAB_HWCACHE_ALIGN|SLAB_CACHE_DMA, .gfp_mask = __GFP_DMA, }; static DEFINE_MUTEX(host_cmd_pool_mutex); -static struct kmem_cache *sense_buffer_slab; -static int sense_buffer_slab_users; - /** * __scsi_get_command - Allocate a struct scsi_cmnd * @shost: host to transmit command @@ -177,8 +178,8 @@ struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *shost, gfp_t gfp_mask) struct scsi_cmnd *cmd; unsigned char *buf; - cmd = kmem_cache_alloc(shost->cmd_pool->slab, - gfp_mask | shost->cmd_pool->gfp_mask); + cmd = kmem_cache_alloc(shost->cmd_pool->cmd_slab, + gfp_mask | shost->cmd_pool->gfp_mask); if (unlikely(!cmd)) { unsigned long flags; @@ -197,12 +198,13 @@ struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *shost, gfp_t gfp_mask) cmd->sense_buffer = buf; } } else { - buf = kmem_cache_alloc(sense_buffer_slab, __GFP_DMA|gfp_mask); + buf = kmem_cache_alloc(shost->cmd_pool->sense_slab, + gfp_mask | shost->cmd_pool->gfp_mask); if (likely(buf)) { memset(cmd, 0, sizeof(*cmd)); cmd->sense_buffer = buf; } else { - kmem_cache_free(shost->cmd_pool->slab, cmd); + kmem_cache_free(shost->cmd_pool->cmd_slab, cmd); cmd = NULL; } } @@ -265,8 +267,9 @@ void __scsi_put_command(struct Scsi_Host *shost, struct scsi_cmnd *cmd, spin_unlock_irqrestore(&shost->free_list_lock, flags); if (likely(cmd != NULL)) { - kmem_cache_free(sense_buffer_slab, cmd->sense_buffer); - kmem_cache_free(shost->cmd_pool->slab, cmd); + kmem_cache_free(shost->cmd_pool->sense_slab, + cmd->sense_buffer); + kmem_cache_free(shost->cmd_pool->cmd_slab, cmd); } put_device(dev); @@ -310,7 +313,6 @@ int scsi_setup_command_freelist(struct Scsi_Host *shost) { struct scsi_host_cmd_pool *pool; struct scsi_cmnd *cmd; - unsigned char *sense_buffer; spin_lock_init(&shost->free_list_lock); INIT_LIST_HEAD(&shost->free_list); @@ -322,11 +324,19 @@ int scsi_setup_command_freelist(struct Scsi_Host *shost) mutex_lock(&host_cmd_pool_mutex); pool = (shost->unchecked_isa_dma ? &scsi_cmd_dma_pool : &scsi_cmd_pool); if (!pool->users) { - pool->slab = kmem_cache_create(pool->name, - sizeof(struct scsi_cmnd), 0, - pool->slab_flags, NULL); - if (!pool->slab) + pool->cmd_slab = kmem_cache_create(pool->cmd_name, + sizeof(struct scsi_cmnd), 0, + pool->slab_flags, NULL); + if (!pool->cmd_slab) + goto fail; + + pool->sense_slab = kmem_cache_create(pool->sense_name, + SCSI_SENSE_BUFFERSIZE, 0, + pool->slab_flags, NULL); + if (!pool->sense_slab) { + kmem_cache_destroy(pool->cmd_slab); goto fail; + } } pool->users++; @@ -336,26 +346,28 @@ int scsi_setup_command_freelist(struct Scsi_Host *shost) /* * Get one backup command for this host. */ - cmd = kmem_cache_alloc(shost->cmd_pool->slab, - GFP_KERNEL | shost->cmd_pool->gfp_mask); + cmd = kmem_cache_alloc(shost->cmd_pool->cmd_slab, + GFP_KERNEL | shost->cmd_pool->gfp_mask); if (!cmd) goto fail2; - sense_buffer = kmem_cache_alloc(sense_buffer_slab, - GFP_KERNEL | __GFP_DMA); - if (!sense_buffer) - goto destroy_backup; + cmd->sense_buffer = kmem_cache_alloc(shost->cmd_pool->sense_slab, + GFP_KERNEL | + shost->cmd_pool->gfp_mask); + if (!cmd->sense_buffer) + goto fail2; - cmd->sense_buffer = sense_buffer; list_add(&cmd->list, &shost->free_list); return 0; -destroy_backup: - kmem_cache_free(shost->cmd_pool->slab, cmd); fail2: + if (cmd) + kmem_cache_free(shost->cmd_pool->cmd_slab, cmd); mutex_lock(&host_cmd_pool_mutex); - if (!--pool->users) - kmem_cache_destroy(pool->slab); + if (!--pool->users) { + kmem_cache_destroy(pool->cmd_slab); + kmem_cache_destroy(pool->sense_slab); + } fail: mutex_unlock(&host_cmd_pool_mutex); return -ENOMEM; @@ -372,39 +384,16 @@ void scsi_destroy_command_freelist(struct Scsi_Host *shost) cmd = list_entry(shost->free_list.next, struct scsi_cmnd, list); list_del_init(&cmd->list); - kmem_cache_free(sense_buffer_slab, cmd->sense_buffer); - kmem_cache_free(shost->cmd_pool->slab, cmd); + kmem_cache_free(shost->cmd_pool->sense_slab, + cmd->sense_buffer); + kmem_cache_free(shost->cmd_pool->cmd_slab, cmd); } mutex_lock(&host_cmd_pool_mutex); - if (!--shost->cmd_pool->users) - kmem_cache_destroy(shost->cmd_pool->slab); - mutex_unlock(&host_cmd_pool_mutex); -} - -int scsi_setup_command_sense_buffer(struct Scsi_Host *shost) -{ - mutex_lock(&host_cmd_pool_mutex); - if (!sense_buffer_slab_users) { - sense_buffer_slab = kmem_cache_create("scsi_sense_buffer", - SCSI_SENSE_BUFFERSIZE, - 0, SLAB_CACHE_DMA, NULL); - if (!sense_buffer_slab) { - mutex_unlock(&host_cmd_pool_mutex); - return -ENOMEM; - } + if (!--shost->cmd_pool->users) { + kmem_cache_destroy(shost->cmd_pool->cmd_slab); + kmem_cache_destroy(shost->cmd_pool->sense_slab); } - sense_buffer_slab_users++; - mutex_unlock(&host_cmd_pool_mutex); - - return 0; -} - -void scsi_destroy_command_sense_buffer(struct Scsi_Host *shost) -{ - mutex_lock(&host_cmd_pool_mutex); - if (!--sense_buffer_slab_users) - kmem_cache_destroy(sense_buffer_slab); mutex_unlock(&host_cmd_pool_mutex); } diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h index 55c6f71a9aee..3f34e9376b0a 100644 --- a/drivers/scsi/scsi_priv.h +++ b/drivers/scsi/scsi_priv.h @@ -27,8 +27,6 @@ extern void scsi_exit_hosts(void); extern int scsi_dispatch_cmd(struct scsi_cmnd *cmd); extern int scsi_setup_command_freelist(struct Scsi_Host *shost); extern void scsi_destroy_command_freelist(struct Scsi_Host *shost); -extern int scsi_setup_command_sense_buffer(struct Scsi_Host *shost); -extern void scsi_destroy_command_sense_buffer(struct Scsi_Host *shost); extern void __scsi_done(struct scsi_cmnd *cmd); #ifdef CONFIG_SCSI_LOGGING void scsi_log_send(struct scsi_cmnd *cmd); -- cgit v1.2.3-59-g8ed1b From 90c18f3c280f80e0bfbab7c1fc4b282842ccb853 Mon Sep 17 00:00:00 2001 From: Erez Zilber Date: Tue, 22 Jan 2008 12:06:25 +0200 Subject: [SCSI] IB/iSER: add logical unit reset support eh_device_reset_handler was already added to scsi_host_template in iscsi_tcp, and is now added also for iscsi_iser. Signed-off-by: Erez Zilber Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/infiniband/ulp/iser/iscsi_iser.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c index fd69fb35e3b3..4cd07056e456 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.c +++ b/drivers/infiniband/ulp/iser/iscsi_iser.c @@ -552,6 +552,7 @@ static struct scsi_host_template iscsi_iser_sht = { .max_sectors = 1024, .cmd_per_lun = ISCSI_MAX_CMD_PER_LUN, .eh_abort_handler = iscsi_eh_abort, + .eh_device_reset_handler= iscsi_eh_device_reset, .eh_host_reset_handler = iscsi_eh_host_reset, .use_clustering = DISABLE_CLUSTERING, .proc_name = "iscsi_iser", -- cgit v1.2.3-59-g8ed1b From 53474c042c0e1be39557474c945ad4a8e653ad46 Mon Sep 17 00:00:00 2001 From: Tony Battersby Date: Tue, 22 Jan 2008 15:25:49 -0500 Subject: [SCSI] sg: fix /proc/scsi/sg/devices when no SCSI devices The patch "[SCSI] sg: use idr to replace static arrays" in 2.6.24-rc1 causes a bogus line to appear in /proc/scsi/sg/devices containing "-1 -1 -1 -1 -1 -1 -1 -1 -1" when there are no SCSI devices in the system. In 2.6.23, /proc/scsi/sg/devices is empty when there are no SCSI devices in the system. A similar problem exists with /proc/scsi/sg/device_strs. The following patch restores the behavior of 2.6.23. Signed-off-by: Tony Battersby Acked-by: Douglas Gilbert Signed-off-by: James Bottomley --- drivers/scsi/sg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 78ac48df4de8..17216b76efdc 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -2529,7 +2529,7 @@ sg_idr_max_id(int id, void *p, void *data) static int sg_last_dev(void) { - int k = 0; + int k = -1; unsigned long iflags; read_lock_irqsave(&sg_index_lock, iflags); -- cgit v1.2.3-59-g8ed1b From a43cf0f3511585493e3c948f7ec62f659486d0b3 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 22 Jan 2008 21:39:33 -0800 Subject: [SCSI] NCR5380: fix section mismatch Many release() methods that are not __exit or __devexit call this __devexit function, so remove its "__devexit" attribute. scsi/g_NCR5380.c: WARNING: vmlinux.o(.text+0xadaf8c): Section mismatch: reference to .exit.text:NCR5380_exit (between 'generic_NCR5380_release_resources' and 'generic_NCR5380_biosparam') WARNING: vmlinux.o(.text+0xadd18c): Section mismatch: reference to .exit.text:NCR5380_exit (between 'generic_NCR5380_release_resources' and 'generic_NCR5380_biosparam') scsi/pas16.c, seagate.c: WARNING: vmlinux.o(.text+0xb29e91): Section mismatch: reference to .exit.text:NCR5380_exit (between 'pas16_release' and 'seagate_st0x_info') t128.c: WARNING: vmlinux.o(.text+0xb2a774): Section mismatch: reference to .exit.text:NCR5380_exit (between 't128_release' and 't128_biosparam') dtc.c, sym2/sym_fw.c: WARNING: vmlinux.o(.text+0xb2f215): Section mismatch: reference to .exit.text:NCR5380_exit (between 'dtc_release' and 'sym_fw1_patch') Signed-off-by: Randy Dunlap Signed-off-by: James Bottomley --- drivers/scsi/NCR5380.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c index c1fb33292e56..eeddbd19eba5 100644 --- a/drivers/scsi/NCR5380.c +++ b/drivers/scsi/NCR5380.c @@ -932,7 +932,7 @@ static int __devinit NCR5380_init(struct Scsi_Host *instance, int flags) * @instance: adapter to remove */ -static void __devexit NCR5380_exit(struct Scsi_Host *instance) +static void NCR5380_exit(struct Scsi_Host *instance) { struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata; -- cgit v1.2.3-59-g8ed1b From a3d2c2e8f5e01e185013d8f944c0a26fdc558ad8 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Wed, 23 Jan 2008 23:34:35 +0900 Subject: [SCSI] ch: handle class_device_create failure properly When class_device_create fails, ch_probe needs to fail too. Signed-off-by: FUJITA Tomonori Signed-off-by: James Bottomley --- drivers/scsi/ch.c | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/ch.c b/drivers/scsi/ch.c index cead0f5379c5..765f2fc001aa 100644 --- a/drivers/scsi/ch.c +++ b/drivers/scsi/ch.c @@ -913,29 +913,37 @@ static long ch_ioctl_compat(struct file * file, static int ch_probe(struct device *dev) { struct scsi_device *sd = to_scsi_device(dev); + struct class_device *class_dev; scsi_changer *ch; - + if (sd->type != TYPE_MEDIUM_CHANGER) return -ENODEV; - + ch = kzalloc(sizeof(*ch), GFP_KERNEL); if (NULL == ch) return -ENOMEM; ch->minor = ch_devcount; sprintf(ch->name,"ch%d",ch->minor); + + class_dev = class_device_create(ch_sysfs_class, NULL, + MKDEV(SCSI_CHANGER_MAJOR, ch->minor), + dev, "s%s", ch->name); + if (IS_ERR(class_dev)) { + printk(KERN_WARNING "ch%d: class_device_create failed\n", + ch->minor); + kfree(ch); + return PTR_ERR(class_dev); + } + mutex_init(&ch->lock); ch->device = sd; ch_readconfig(ch); if (init) ch_init_elem(ch); - class_device_create(ch_sysfs_class, NULL, - MKDEV(SCSI_CHANGER_MAJOR,ch->minor), - dev, "s%s", ch->name); - sdev_printk(KERN_INFO, sd, "Attached scsi changer %s\n", ch->name); - + spin_lock(&ch_devlist_lock); list_add_tail(&ch->list,&ch_devlist); ch_devcount++; -- cgit v1.2.3-59-g8ed1b From e2d435ea4084022ab88efa74214accb45b1f9e92 Mon Sep 17 00:00:00 2001 From: Stuart Swales Date: Wed, 23 Jan 2008 20:00:48 +0000 Subject: [SCSI] initio: fix module hangs on loading I've verified (on my Initio 9100 with a DAT drive) that the 2.6.24-rc8-git6 initio module still hangs on loading. These fixes (other than the printk) are needed to get the module to load ok (and work correctly) with my adapter & tape drive. a) printk cosmetic fix b) cblk->sglen needs setting for later DMA I/O routines to use c) host->bios_addr needs setting for debug output correctness d) semaph & semaph_lock initialisation had got lost since 2.6.22 e) since 2.6.22 the bios data address was truncated to 16 bits (needs 20 when shifted left) Signed-off-by: James Bottomley --- drivers/scsi/initio.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c index 01bf0189367d..a10a5c74b48d 100644 --- a/drivers/scsi/initio.c +++ b/drivers/scsi/initio.c @@ -823,7 +823,7 @@ static void initio_append_busy_scb(struct initio_host * host, struct scsi_ctrl_b { #if DEBUG_QUEUE - printk("append busy SCB %o; ", scbp); + printk("append busy SCB %p; ", scbp); #endif if (scbp->tagmsg) host->act_tags[scbp->target]++; @@ -2609,6 +2609,7 @@ static void initio_build_scb(struct initio_host * host, struct scsi_ctrl_blk * c cblk->bufptr = cpu_to_le32((u32)dma_addr); cmnd->SCp.dma_handle = dma_addr; + cblk->sglen = nseg; cblk->flags |= SCF_SG; /* Turn on SG list flag */ total_len = 0; @@ -2869,6 +2870,7 @@ static int initio_probe_one(struct pci_dev *pdev, host = (struct initio_host *)shost->hostdata; memset(host, 0, sizeof(struct initio_host)); host->addr = pci_resource_start(pdev, 0); + host->bios_addr = bios_seg; if (!request_region(host->addr, 256, "i91u")) { printk(KERN_WARNING "initio: I/O port range 0x%x is busy.\n", host->addr); @@ -2895,6 +2897,8 @@ static int initio_probe_one(struct pci_dev *pdev, host->pci_dev = pdev; + host->semaph = 1; + spin_lock_init(&host->semaph_lock); host->num_scbs = num_scb; host->scb = scb; host->next_pending = scb; @@ -2911,7 +2915,7 @@ static int initio_probe_one(struct pci_dev *pdev, host->last_avail = prev; spin_lock_init(&host->avail_lock); - initio_init(host, phys_to_virt(bios_seg << 4)); + initio_init(host, phys_to_virt(((u32)bios_seg << 4))); host->jsstatus0 = 0; -- cgit v1.2.3-59-g8ed1b From f9c4cfe95451b7f4531d73d2a8a6651cba9760ab Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Wed, 23 Jan 2008 16:07:17 -0800 Subject: xen: disable vcpu_info placement for now There have been several reports of Xen guest domains locking up when using vcpu_info structure placement. Disable it for now. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Linus Torvalds --- arch/x86/xen/enlighten.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index b6af3ea43c73..79ad15252150 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -95,7 +95,7 @@ struct shared_info *HYPERVISOR_shared_info = (void *)&dummy_shared_info; * * 0: not available, 1: available */ -static int have_vcpu_info_placement = 1; +static int have_vcpu_info_placement = 0; static void __init xen_vcpu_setup(int cpu) { -- cgit v1.2.3-59-g8ed1b From e914a36ac7158235e3f65f0b33bc001a4193e0b5 Mon Sep 17 00:00:00 2001 From: Carlos Martín Date: Thu, 24 Jan 2008 10:34:09 +1000 Subject: agp/intel: add support for E7221 chipset The E7221 chipset is a 915 rebadged for the Intel server line. Signed-off-by: Dave Airlie Signed-off-by: Linus Torvalds --- drivers/char/agp/intel-agp.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index d87961993ccf..03eac1eb8e0f 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -10,6 +10,8 @@ #include #include "agp.h" +#define PCI_DEVICE_ID_INTEL_E7221_HB 0x2588 +#define PCI_DEVICE_ID_INTEL_E7221_IG 0x258a #define PCI_DEVICE_ID_INTEL_82946GZ_HB 0x2970 #define PCI_DEVICE_ID_INTEL_82946GZ_IG 0x2972 #define PCI_DEVICE_ID_INTEL_82965G_1_HB 0x2980 @@ -526,7 +528,8 @@ static void intel_i830_init_gtt_entries(void) break; case I915_GMCH_GMS_STOLEN_48M: /* Check it's really I915G */ - if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915G_HB || + if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_E7221_HB || + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915G_HB || agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB || agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945G_HB || agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945GM_HB || @@ -538,7 +541,8 @@ static void intel_i830_init_gtt_entries(void) break; case I915_GMCH_GMS_STOLEN_64M: /* Check it's really I915G */ - if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915G_HB || + if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_E7221_HB || + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915G_HB || agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB || agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945G_HB || agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945GM_HB || @@ -1854,6 +1858,8 @@ static const struct intel_driver_description { { PCI_DEVICE_ID_INTEL_82865_HB, PCI_DEVICE_ID_INTEL_82865_IG, 0, "865", &intel_845_driver, &intel_830_driver }, { PCI_DEVICE_ID_INTEL_82875_HB, 0, 0, "i875", &intel_845_driver, NULL }, + { PCI_DEVICE_ID_INTEL_E7221_HB, PCI_DEVICE_ID_INTEL_E7221_IG, 0, "E7221 (i915)", + NULL, &intel_915_driver }, { PCI_DEVICE_ID_INTEL_82915G_HB, PCI_DEVICE_ID_INTEL_82915G_IG, 0, "915G", NULL, &intel_915_driver }, { PCI_DEVICE_ID_INTEL_82915GM_HB, PCI_DEVICE_ID_INTEL_82915GM_IG, 0, "915GM", @@ -2059,6 +2065,7 @@ static struct pci_device_id agp_intel_pci_table[] = { ID(PCI_DEVICE_ID_INTEL_82875_HB), ID(PCI_DEVICE_ID_INTEL_7505_0), ID(PCI_DEVICE_ID_INTEL_7205_0), + ID(PCI_DEVICE_ID_INTEL_E7221_HB), ID(PCI_DEVICE_ID_INTEL_82915G_HB), ID(PCI_DEVICE_ID_INTEL_82915GM_HB), ID(PCI_DEVICE_ID_INTEL_82945G_HB), -- cgit v1.2.3-59-g8ed1b From 53256f59116b541f087eb9423c1578e09a1b4b2f Mon Sep 17 00:00:00 2001 From: Carlos Martín Date: Thu, 24 Jan 2008 10:34:10 +1000 Subject: drm/i915: add support for E7221 chipset E7221 chipset is a server version of the i915. Signed-off-by: Dave Airlie Signed-off-by: Linus Torvalds --- drivers/char/drm/drm_pciids.h | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/char/drm/drm_pciids.h b/drivers/char/drm/drm_pciids.h index f3593974496c..43d3c42df360 100644 --- a/drivers/char/drm/drm_pciids.h +++ b/drivers/char/drm/drm_pciids.h @@ -297,6 +297,7 @@ {0x8086, 0x3582, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0x8086, 0x2572, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0x8086, 0x2582, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ + {0x8086, 0x258a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0x8086, 0x2592, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0x8086, 0x2772, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0x8086, 0x27a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ -- cgit v1.2.3-59-g8ed1b From 81b4e1f6269cea345f17d3aa349ec9beb31a8cd3 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 16 Jan 2008 17:20:37 -0500 Subject: DMI: move dmi_available declaration to linux/dmi.h Signed-off-by: Len Brown --- drivers/firmware/dmi-id.c | 2 -- include/linux/dmi.h | 2 ++ 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/firmware/dmi-id.c b/drivers/firmware/dmi-id.c index bc132d8f79cb..313c99cbdc62 100644 --- a/drivers/firmware/dmi-id.c +++ b/drivers/firmware/dmi-id.c @@ -173,8 +173,6 @@ static struct device *dmi_dev; if (dmi_get_system_info(_field)) \ sys_dmi_attributes[i++] = &sys_dmi_##_name##_attr.dev_attr.attr; -extern int dmi_available; - /* In a separate function to keep gcc 3.2 happy - do NOT merge this in dmi_id_init! */ static void __init dmi_id_init_attr_table(void) diff --git a/include/linux/dmi.h b/include/linux/dmi.h index 00fc7a9c35ec..b1251b2af568 100644 --- a/include/linux/dmi.h +++ b/include/linux/dmi.h @@ -78,6 +78,7 @@ extern const struct dmi_device * dmi_find_device(int type, const char *name, extern void dmi_scan_machine(void); extern int dmi_get_year(int field); extern int dmi_name_in_vendors(const char *str); +extern int dmi_available; #else @@ -87,6 +88,7 @@ static inline const struct dmi_device * dmi_find_device(int type, const char *na const struct dmi_device *from) { return NULL; } static inline int dmi_get_year(int year) { return 0; } static inline int dmi_name_in_vendors(const char *s) { return 0; } +#define dmi_available 0 #endif -- cgit v1.2.3-59-g8ed1b From f89e3b0620a0dc19f313218f55373b9361142203 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 23 Jan 2008 16:36:45 -0500 Subject: DMI: create dmi_get_slot() This simply allows other sub-systems (such as ACPI) to access and print out slots in static dmi_ident[]. Signed-off-by: Len Brown --- drivers/firmware/dmi_scan.c | 8 ++++++++ include/linux/dmi.h | 2 ++ 2 files changed, 10 insertions(+) diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index 0cdadea7a40e..5e596a7e3601 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -470,3 +470,11 @@ int dmi_get_year(int field) return year; } +/** + * dmi_get_slot - return dmi_ident[slot] + * @slot: index into dmi_ident[] + */ +char *dmi_get_slot(int slot) +{ + return(dmi_ident[slot]); +} diff --git a/include/linux/dmi.h b/include/linux/dmi.h index b1251b2af568..5b42a659a308 100644 --- a/include/linux/dmi.h +++ b/include/linux/dmi.h @@ -79,6 +79,7 @@ extern void dmi_scan_machine(void); extern int dmi_get_year(int field); extern int dmi_name_in_vendors(const char *str); extern int dmi_available; +extern char *dmi_get_slot(int slot); #else @@ -89,6 +90,7 @@ static inline const struct dmi_device * dmi_find_device(int type, const char *na static inline int dmi_get_year(int year) { return 0; } static inline int dmi_name_in_vendors(const char *s) { return 0; } #define dmi_available 0 +static inline char *dmi_get_slot(int slot) { return NULL; } #endif -- cgit v1.2.3-59-g8ed1b From 5a4e143271b97dcaa113761a76942c4d4bc273a2 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 23 Jan 2008 20:01:22 -0500 Subject: ACPI: create acpi_dmi_dump() A utility routine to print common entries used for ACPI-related DMI blacklist entries. Signed-off-by: Len Brown --- drivers/acpi/osl.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index e3a673a00845..93ad5f40f2ea 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -1141,6 +1141,34 @@ acpi_status acpi_os_release_object(acpi_cache_t * cache, void *object) return (AE_OK); } +/** + * acpi_dmi_dump - dump DMI slots needed for blacklist entry + * + * Returns 0 on success + */ +int acpi_dmi_dump(void) +{ + + if (!dmi_available) + return -1; + + printk(KERN_NOTICE PREFIX "DMI System Vendor: %s\n", + dmi_get_slot(DMI_SYS_VENDOR)); + printk(KERN_NOTICE PREFIX "DMI Product Name: %s\n", + dmi_get_slot(DMI_PRODUCT_NAME)); + printk(KERN_NOTICE PREFIX "DMI Product Version: %s\n", + dmi_get_slot(DMI_PRODUCT_VERSION)); + printk(KERN_NOTICE PREFIX "DMI Board Name: %s\n", + dmi_get_slot(DMI_BOARD_NAME)); + printk(KERN_NOTICE PREFIX "DMI BIOS Vendor: %s\n", + dmi_get_slot(DMI_BIOS_VENDOR)); + printk(KERN_NOTICE PREFIX "DMI BIOS Date: %s\n", + dmi_get_slot(DMI_BIOS_DATE)); + + return 0; +} + + /****************************************************************************** * * FUNCTION: acpi_os_validate_interface -- cgit v1.2.3-59-g8ed1b From f40cd6fddcb1d51d8a2a67ddc81c14a3532f3cb7 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 23 Jan 2008 20:04:28 -0500 Subject: ACPI: on OSI(Linux), print needed DMI rather than requesting dmidecode output Signed-off-by: Len Brown --- drivers/acpi/osl.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 93ad5f40f2ea..2203153b5402 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -1190,10 +1190,16 @@ acpi_os_validate_interface (char *interface) if (!strcmp("Linux", interface)) { printk(KERN_WARNING PREFIX "System BIOS is requesting _OSI(Linux)\n"); - printk(KERN_WARNING PREFIX - "If \"acpi_osi=Linux\" works better,\n" - "Please send dmidecode " - "to linux-acpi@vger.kernel.org\n"); + if (acpi_dmi_dump()) + printk(KERN_NOTICE PREFIX + "[please extract dmidecode output]\n"); + printk(KERN_NOTICE PREFIX + "Please send DMI info above to " + "linux-acpi@vger.kernel.org\n"); + printk(KERN_NOTICE PREFIX + "If \"acpi_osi=%sLinux\" works better, " + "please notify linux-acpi@vger.kernel.org\n", + osi_linux ? "!" : ""); if(osi_linux) return AE_OK; } -- cgit v1.2.3-59-g8ed1b From 7ce95ce5c6dbbc3f70933f04537860ffd9dbe17e Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 23 Jan 2008 20:06:41 -0500 Subject: ACPI: Delete Intel Customer Reference Board (CRB) from OSI(Linux) DMI list Linux does not want BIOS writers to invoke _OSI(Linux) - for in the field it causes more Windows incompatibility problems than it solves. So when it is seen in the BIOS for an Intel Customer Reference Board, Linux should ignore its effect by default, and should complain loudly. Otherwise, the reference BIOS will go unfixed, and the bad BIOS will spread to the field. Users of this board can get the old behavior with "acpi_osi=Linux" As this was the only entry, delete acpi_osl_dmi_table[]. Signed-off-by: Len Brown --- drivers/acpi/osl.c | 29 ----------------------------- 1 file changed, 29 deletions(-) diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 2203153b5402..15f095ea795e 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -79,10 +79,6 @@ static char osi_additional_string[OSI_STRING_LENGTH_MAX]; static int osi_linux; /* disable _OSI(Linux) by default */ -#ifdef CONFIG_DMI -static struct __initdata dmi_system_id acpi_osl_dmi_table[]; -#endif - static void __init acpi_request_region (struct acpi_generic_address *addr, unsigned int length, char *desc) { @@ -133,7 +129,6 @@ device_initcall(acpi_reserve_resources); acpi_status __init acpi_os_initialize(void) { - dmi_check_system(acpi_osl_dmi_table); return AE_OK; } @@ -1232,28 +1227,4 @@ acpi_os_validate_address ( return AE_OK; } -#ifdef CONFIG_DMI -static int dmi_osi_linux(const struct dmi_system_id *d) -{ - printk(KERN_NOTICE "%s detected: enabling _OSI(Linux)\n", d->ident); - enable_osi_linux(1); - return 0; -} - -static struct dmi_system_id acpi_osl_dmi_table[] __initdata = { - /* - * Boxes that need _OSI(Linux) - */ - { - .callback = dmi_osi_linux, - .ident = "Intel Napa CRB", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"), - DMI_MATCH(DMI_BOARD_NAME, "MPAD-MSAE Customer Reference Boards"), - }, - }, - {} -}; -#endif /* CONFIG_DMI */ - #endif -- cgit v1.2.3-59-g8ed1b From d4b7dc499daae909e62dc260b95cd618f2970ded Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 23 Jan 2008 20:50:56 -0500 Subject: ACPI: make _OSI(Linux) console messages smarter If BIOS invokes _OSI(Linux), the kernel response depends on what the ACPI DMI list knows about the system, and that is reflectd in dmesg: 1) System unknown to DMI: ACPI: BIOS _OSI(Linux) query ignored ACPI: DMI System Vendor: LENOVO ACPI: DMI Product Name: 7661W1P ACPI: DMI Product Version: ThinkPad T61 ACPI: DMI Board Name: 7661W1P ACPI: DMI BIOS Vendor: LENOVO ACPI: DMI BIOS Date: 10/18/2007 ACPI: Please send DMI info above to linux-acpi@vger.kernel.org ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org 2) System known to DMI, but effect of OSI(Linux) unknown: ACPI: DMI detected: Lenovo ThinkPad T61 ... ACPI: BIOS _OSI(Linux) query ignored via DMI ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org 3) System known to DMI, which disables _OSI(Linux): ACPI: DMI detected: Lenovo ThinkPad T61 ... ACPI: BIOS _OSI(Linux) query ignored via DMI 4) System known to DMI, which enable _OSI(Linux): ACPI: DMI detected: Lenovo ThinkPad T61 ACPI: Added _OSI(Linux) ... ACPI: BIOS _OSI(Linux) query honored via DMI cmdline overrides take precidence over the built-in default and the DMI prescribed default. cmdline "acpi_osi=Linux" results in: ACPI: BIOS _OSI(Linux) query honored via cmdline Signed-off-by: Len Brown --- drivers/acpi/blacklist.c | 11 +++++ drivers/acpi/osl.c | 122 +++++++++++++++++++++++++++++++++++++++-------- include/linux/acpi.h | 7 ++- 3 files changed, 118 insertions(+), 22 deletions(-) diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c index 3ec110ce00c8..018fc16c44ce 100644 --- a/drivers/acpi/blacklist.c +++ b/drivers/acpi/blacklist.c @@ -3,6 +3,7 @@ * * Check to see if the given machine has a known bad ACPI BIOS * or if the BIOS is too old. + * Check given machine against acpi_osi_dmi_table[]. * * Copyright (C) 2004 Len Brown * Copyright (C) 2002 Andy Grover @@ -50,6 +51,8 @@ struct acpi_blacklist_item { u32 is_critical_error; }; +static struct dmi_system_id acpi_osi_dmi_table[] __initdata; + /* * POLICY: If *anything* doesn't work, put it on the blacklist. * If they are critical errors, mark it critical, and abort driver load. @@ -165,5 +168,13 @@ int __init acpi_blacklisted(void) blacklisted += blacklist_by_year(); + dmi_check_system(acpi_osi_dmi_table); + return blacklisted; } +#ifdef CONFIG_DMI +static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { + {} +}; + +#endif /* CONFIG_DMI */ diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 15f095ea795e..e53fb516f9d4 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -77,7 +77,55 @@ static struct workqueue_struct *kacpi_notify_wq; #define OSI_STRING_LENGTH_MAX 64 /* arbitrary */ static char osi_additional_string[OSI_STRING_LENGTH_MAX]; -static int osi_linux; /* disable _OSI(Linux) by default */ +/* + * "Ode to _OSI(Linux)" + * + * osi_linux -- Control response to BIOS _OSI(Linux) query. + * + * As Linux evolves, the features that it supports change. + * So an OSI string such as "Linux" is not specific enough + * to be useful across multiple versions of Linux. It + * doesn't identify any particular feature, interface, + * or even any particular version of Linux... + * + * Unfortunately, Linux-2.6.22 and earlier responded "yes" + * to a BIOS _OSI(Linux) query. When + * a reference mobile BIOS started using it, its use + * started to spread to many vendor platforms. + * As it is not supportable, we need to halt that spread. + * + * Today, most BIOS references to _OSI(Linux) are noise -- + * they have no functional effect and are just dead code + * carried over from the reference BIOS. + * + * The next most common case is that _OSI(Linux) harms Linux, + * usually by causing the BIOS to follow paths that are + * not tested during Windows validation. + * + * Finally, there is a short list of platforms + * where OSI(Linux) benefits Linux. + * + * In Linux-2.6.23, OSI(Linux) is first disabled by default. + * DMI is used to disable the dmesg warning about OSI(Linux) + * on platforms where it is known to have no effect. + * But a dmesg warning remains for systems where + * we do not know if OSI(Linux) is good or bad for the system. + * DMI is also used to enable OSI(Linux) for the machines + * that are known to need it. + * + * BIOS writers should NOT query _OSI(Linux) on future systems. + * It will be ignored by default, and to get Linux to + * not ignore it will require a kernel source update to + * add a DMI entry, or a boot-time "acpi_osi=Linux" invocation. + */ +#define OSI_LINUX_ENABLE 0 + +struct osi_linux { + unsigned int enable:1; + unsigned int dmi:1; + unsigned int cmdline:1; + unsigned int known:1; +} osi_linux = { OSI_LINUX_ENABLE, 0, 0, 0}; static void __init acpi_request_region (struct acpi_generic_address *addr, unsigned int length, char *desc) @@ -959,13 +1007,37 @@ static int __init acpi_os_name_setup(char *str) __setup("acpi_os_name=", acpi_os_name_setup); -static void enable_osi_linux(int enable) { +static void __init set_osi_linux(unsigned int enable) +{ + if (osi_linux.enable != enable) { + osi_linux.enable = enable; + printk(KERN_NOTICE PREFIX "%sed _OSI(Linux)\n", + enable ? "Add": "Delet"); + } + return; +} + +static void __init acpi_cmdline_osi_linux(unsigned int enable) +{ + osi_linux.cmdline = 1; /* cmdline set the default */ + set_osi_linux(enable); + + return; +} + +void __init acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d) +{ + osi_linux.dmi = 1; /* DMI knows that this box asks OSI(Linux) */ + + printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident); + + if (enable == -1) + return; + + osi_linux.known = 1; /* DMI knows which OSI(Linux) default needed */ - if (osi_linux != enable) - printk(KERN_INFO PREFIX "%sabled _OSI(Linux)\n", - enable ? "En": "Dis"); + set_osi_linux(enable); - osi_linux = enable; return; } @@ -982,12 +1054,12 @@ static int __init acpi_osi_setup(char *str) printk(KERN_INFO PREFIX "_OSI method disabled\n"); acpi_gbl_create_osi_method = FALSE; } else if (!strcmp("!Linux", str)) { - enable_osi_linux(0); + acpi_cmdline_osi_linux(0); /* !enable */ } else if (*str == '!') { if (acpi_osi_invalidate(++str) == AE_OK) printk(KERN_INFO PREFIX "Deleted _OSI(%s)\n", str); } else if (!strcmp("Linux", str)) { - enable_osi_linux(1); + acpi_cmdline_osi_linux(1); /* enable */ } else if (*osi_additional_string == '\0') { strncpy(osi_additional_string, str, OSI_STRING_LENGTH_MAX); printk(KERN_INFO PREFIX "Added _OSI(%s)\n", str); @@ -1183,19 +1255,29 @@ acpi_os_validate_interface (char *interface) if (!strncmp(osi_additional_string, interface, OSI_STRING_LENGTH_MAX)) return AE_OK; if (!strcmp("Linux", interface)) { - printk(KERN_WARNING PREFIX - "System BIOS is requesting _OSI(Linux)\n"); - if (acpi_dmi_dump()) - printk(KERN_NOTICE PREFIX - "[please extract dmidecode output]\n"); - printk(KERN_NOTICE PREFIX - "Please send DMI info above to " - "linux-acpi@vger.kernel.org\n"); + printk(KERN_NOTICE PREFIX - "If \"acpi_osi=%sLinux\" works better, " - "please notify linux-acpi@vger.kernel.org\n", - osi_linux ? "!" : ""); - if(osi_linux) + "BIOS _OSI(Linux) query %s%s\n", + osi_linux.enable ? "honored" : "ignored", + osi_linux.cmdline ? " via cmdline" : + osi_linux.dmi ? " via DMI" : ""); + + if (!osi_linux.dmi) { + if (acpi_dmi_dump()) + printk(KERN_NOTICE PREFIX + "[please extract dmidecode output]\n"); + printk(KERN_NOTICE PREFIX + "Please send DMI info above to " + "linux-acpi@vger.kernel.org\n"); + } + if (!osi_linux.known && !osi_linux.cmdline) { + printk(KERN_NOTICE PREFIX + "If \"acpi_osi=%sLinux\" works better, " + "please notify linux-acpi@vger.kernel.org\n", + osi_linux.enable ? "!" : ""); + } + + if (osi_linux.enable) return AE_OK; } return AE_SUPPORT; diff --git a/include/linux/acpi.h b/include/linux/acpi.h index e3c16c981e46..63f2e6ed698f 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -40,6 +40,7 @@ #include #include #include +#include #ifdef CONFIG_ACPI @@ -192,7 +193,9 @@ extern int ec_transaction(u8 command, #endif /*CONFIG_ACPI_EC*/ extern int acpi_blacklisted(void); -extern void acpi_bios_year(char *s); +#ifdef CONFIG_DMI +extern void acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d); +#endif #ifdef CONFIG_ACPI_NUMA int acpi_get_pxm(acpi_handle handle); @@ -226,5 +229,5 @@ static inline int acpi_boot_table_init(void) return 0; } -#endif /* CONFIG_ACPI */ +#endif /* !CONFIG_ACPI */ #endif /*_LINUX_ACPI_H*/ -- cgit v1.2.3-59-g8ed1b From 98f1db22d70b0660a27cc8818a61181b5d503671 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 23 Jan 2008 20:56:18 -0500 Subject: ACPI: Add ThinkPad R61, ThinkPad T61 to OSI(Linux) white-list acpi_osi=Linux helps sound on these systems. Signed-off-by: Len Brown --- drivers/acpi/blacklist.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c index 018fc16c44ce..e88d4460afda 100644 --- a/drivers/acpi/blacklist.c +++ b/drivers/acpi/blacklist.c @@ -173,7 +173,34 @@ int __init acpi_blacklisted(void) return blacklisted; } #ifdef CONFIG_DMI +static int __init dmi_enable_osi_linux(const struct dmi_system_id *d) +{ + acpi_dmi_osi_linux(1, d); /* enable */ + return 0; +} + static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { + /* + * _OSI(Linux) helps sound + * DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad R61"), + * DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T61"), + */ + { + .callback = dmi_enable_osi_linux, + .ident = "Lenovo ThinkPad R61", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad R61"), + }, + }, + { + .callback = dmi_enable_osi_linux, + .ident = "Lenovo ThinkPad T61", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T61"), + }, + }, {} }; -- cgit v1.2.3-59-g8ed1b From a1bd4e35e8d9df24db7d7addd74cbfcc87ec9fb3 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 23 Jan 2008 21:19:27 -0500 Subject: ACPI: DMI blacklist to reduce console warnings on OSI(Linux) systems. This DMI blacklist reduces the console messages on systems which have a BIOS that invokes OSI(Linux). As the DMI blacklist already knows about these systems, the request for DMI info itself is disabled. Further, if OSI(Linux) has already been determined to have no beneift, we disable the console message requesting acpi_osi=Linux test results. Signed-off-by: Len Brown --- drivers/acpi/blacklist.c | 343 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 343 insertions(+) diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c index e88d4460afda..8809654d6cc9 100644 --- a/drivers/acpi/blacklist.c +++ b/drivers/acpi/blacklist.c @@ -178,12 +178,264 @@ static int __init dmi_enable_osi_linux(const struct dmi_system_id *d) acpi_dmi_osi_linux(1, d); /* enable */ return 0; } +static int __init dmi_disable_osi_linux(const struct dmi_system_id *d) +{ + acpi_dmi_osi_linux(0, d); /* disable */ + return 0; +} +static int __init dmi_unknown_osi_linux(const struct dmi_system_id *d) +{ + acpi_dmi_osi_linux(-1, d); /* unknown */ + return 0; +} + +/* + * Most BIOS that invoke OSI(Linux) do nothing with it. + * But some cause Linux to break. + * Only a couple use it to make Linux run better. + * + * Thus, Linux should continue to disable OSI(Linux) by default, + * should continue to discourage BIOS writers from using it, and + * should whitelist the few existing systems that require it. + * + * If it appears clear a vendor isn't using OSI(Linux) + * for anything constructive, blacklist them by name to disable + * unnecessary dmesg warnings on all of their products. + */ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { /* + * Disable OSI(Linux) warnings on all "Acer, inc." + * + * _OSI(Linux) disables the latest Windows BIOS code: + * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5050"), + * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5580"), + * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 3010"), + * _OSI(Linux) effect unknown: + * DMI_MATCH(DMI_PRODUCT_NAME, "Ferrari 5000"), + */ + { + .callback = dmi_disable_osi_linux, + .ident = "Acer, inc.", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer, inc."), + }, + }, + /* + * Disable OSI(Linux) warnings on all "Acer" + * + * _OSI(Linux) effect unknown: + * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5100"), + * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5610"), + * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720Z"), + * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 5520"), + * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 6460"), + * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 7510"), + * DMI_MATCH(DMI_PRODUCT_NAME, "Extensa 5220"), + */ + { + .callback = dmi_unknown_osi_linux, + .ident = "Acer", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + }, + }, + /* + * Disable OSI(Linux) warnings on all "Apple Computer, Inc." + * + * _OSI(Linux) confirmed to be a NOP: + * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"), + * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook2,1"), + * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,2"), + * _OSI(Linux) effect unknown: + * DMI_MATCH(DMI_PRODUCT_NAME, "MacPro2,1"), + * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro1,1"), + * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3,1"), + */ + { + .callback = dmi_disable_osi_linux, + .ident = "Apple", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."), + }, + }, + /* + * Disable OSI(Linux) warnings on all "BenQ" + * + * _OSI(Linux) confirmed to be a NOP: + * DMI_MATCH(DMI_PRODUCT_NAME, "Joybook S31"), + */ + { + .callback = dmi_disable_osi_linux, + .ident = "BenQ", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "BenQ"), + }, + }, + /* + * Disable OSI(Linux) warnings on all "Clevo Co." + * + * _OSI(Linux) confirmed to be a NOP: + * DMI_MATCH(DMI_PRODUCT_NAME, "M570RU"), + */ + { + .callback = dmi_disable_osi_linux, + .ident = "Clevo", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Clevo Co."), + }, + }, + /* + * Disable OSI(Linux) warnings on all "COMPAL" + * + * _OSI(Linux) confirmed to be a NOP: + * DMI_MATCH(DMI_BOARD_NAME, "HEL8X"), + * _OSI(Linux) unknown effect: + * DMI_MATCH(DMI_BOARD_NAME, "IFL91"), + */ + { + .callback = dmi_unknown_osi_linux, + .ident = "Compal", + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"), + }, + }, + { /* OSI(Linux) touches USB, breaks suspend to disk */ + .callback = dmi_disable_osi_linux, + .ident = "Dell Dimension 5150", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Dell DM051"), + }, + }, + { /* OSI(Linux) is a NOP */ + .callback = dmi_disable_osi_linux, + .ident = "Dell", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1501"), + }, + }, + { /* OSI(Linux) effect unknown */ + .callback = dmi_unknown_osi_linux, + .ident = "Dell", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D830"), + }, + }, + { /* OSI(Linux) effect unknown */ + .callback = dmi_unknown_osi_linux, + .ident = "Dell", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex GX620"), + }, + }, + { /* OSI(Linux) effect unknown */ + .callback = dmi_unknown_osi_linux, + .ident = "Dell", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1900"), + }, + }, + { /* OSI(Linux) touches USB */ + .callback = dmi_disable_osi_linux, + .ident = "Dell", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 390"), + }, + }, + { /* OSI(Linux) is a NOP */ + .callback = dmi_disable_osi_linux, + .ident = "Dell Vostro 1000", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1000"), + }, + }, + { /* OSI(Linux) effect unknown */ + .callback = dmi_unknown_osi_linux, + .ident = "Dell", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge SC440"), + }, + }, + { /* OSI(Linux) effect unknown */ + .callback = dmi_unknown_osi_linux, + .ident = "Dialogue Flybook V5", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dialogue Technology Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "Flybook V5"), + }, + }, + /* + * Disable OSI(Linux) warnings on all "FUJITSU SIEMENS" + * + * _OSI(Linux) disables latest Windows BIOS code: + * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 2510"), + * _OSI(Linux) confirmed to be a NOP: + * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1536"), + * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1556"), + * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 1546"), + * _OSI(Linux) unknown effect: + * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo M1425"), + * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo Si 1520"), + * DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"), + */ + { + .callback = dmi_disable_osi_linux, + .ident = "Fujitsu Siemens", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + }, + }, + /* + * Disable OSI(Linux) warnings on all "Hewlett-Packard" + * + * _OSI(Linux) confirmed to be a NOP: + * .ident = "HP Pavilion tx 1000" + * DMI_MATCH(DMI_BOARD_NAME, "30BF"), + * .ident = "HP Pavilion dv2000" + * DMI_MATCH(DMI_BOARD_NAME, "30B5"), + * .ident = "HP Pavilion dv5000", + * DMI_MATCH(DMI_BOARD_NAME, "30A7"), + * .ident = "HP Pavilion dv6300 30BC", + * DMI_MATCH(DMI_BOARD_NAME, "30BC"), + * .ident = "HP Pavilion dv6000", + * DMI_MATCH(DMI_BOARD_NAME, "30B7"), + * DMI_MATCH(DMI_BOARD_NAME, "30B8"), + * .ident = "HP Pavilion dv9000", + * DMI_MATCH(DMI_BOARD_NAME, "30B9"), + * .ident = "HP Pavilion dv9500", + * DMI_MATCH(DMI_BOARD_NAME, "30CB"), + * .ident = "HP/Compaq Presario C500", + * DMI_MATCH(DMI_BOARD_NAME, "30C6"), + * .ident = "HP/Compaq Presario F500", + * DMI_MATCH(DMI_BOARD_NAME, "30D3"), + * _OSI(Linux) unknown effect: + * .ident = "HP Pavilion dv6500", + * DMI_MATCH(DMI_BOARD_NAME, "30D0"), + */ + { + .callback = dmi_disable_osi_linux, + .ident = "Hewlett-Packard", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + }, + }, + /* + * Lenovo has a mix of systems OSI(Linux) situations + * and thus we can not wildcard the vendor. + * * _OSI(Linux) helps sound * DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad R61"), * DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T61"), + * _OSI(Linux) is a NOP: + * DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"), */ { .callback = dmi_enable_osi_linux, @@ -201,6 +453,97 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T61"), }, }, + { + .callback = dmi_unknown_osi_linux, + .ident = "Lenovo 3000 V100", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "LENOVO3000 V100"), + }, + }, + { + .callback = dmi_disable_osi_linux, + .ident = "Lenovo 3000 N100", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"), + }, + }, + /* + * Disable OSI(Linux) warnings on all "LG Electronics" + * + * _OSI(Linux) confirmed to be a NOP: + * DMI_MATCH(DMI_PRODUCT_NAME, "P1-J150B"), + */ + { + .callback = dmi_disable_osi_linux, + .ident = "LG", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"), + }, + }, + /* NEC - OSI(Linux) effect unknown */ + { + .callback = dmi_unknown_osi_linux, + .ident = "NEC VERSA M360", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "NEC Computers SAS"), + DMI_MATCH(DMI_PRODUCT_NAME, "NEC VERSA M360"), + }, + }, + /* + * Disable OSI(Linux) warnings on all "Samsung Electronics" + * + * OSI(Linux) disables PNP0C32 and other BIOS code for Windows: + * DMI_MATCH(DMI_PRODUCT_NAME, "R40P/R41P"), + * DMI_MATCH(DMI_PRODUCT_NAME, "R59P/R60P/R61P"), + */ + { + .callback = dmi_disable_osi_linux, + .ident = "Samsung", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + }, + }, + /* + * Disable OSI(Linux) warnings on all "Sony Corporation" + * + * _OSI(Linux) is a NOP: + * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ650N"), + * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ38GP_C"), + * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-TZ21MN_N"), + * _OSI(Linux) unknown effect: + * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FZ11M"), + */ + { + .callback = dmi_unknown_osi_linux, + .ident = "Sony", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + }, + }, + /* + * Disable OSI(Linux) warnings on all "TOSHIBA" + * + * _OSI(Linux) breaks sound (bugzilla 7787): + * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P100"), + * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P105"), + * _OSI(Linux) is a NOP: + * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A100"), + * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A210"), + * _OSI(Linux) unknown effect: + * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A135"), + * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A200"), + * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P205"), + * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U305"), + */ + { + .callback = dmi_disable_osi_linux, + .ident = "Toshiba", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + }, + }, {} }; -- cgit v1.2.3-59-g8ed1b From 03d1d99c55649ca641b86d2e3489b167ede1671a Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Wed, 23 Jan 2008 22:28:34 -0500 Subject: ACPI: EC: fix dmesg spam regression Return OBF_1 optimization workaround http://bugzilla.kernel.org/show_bug.cgi?id=8459 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 97dc16155a55..8917d754020e 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -82,6 +82,7 @@ enum { EC_FLAGS_ADDRESS, /* Address is being written */ EC_FLAGS_NO_WDATA_GPE, /* Don't expect WDATA GPE event */ EC_FLAGS_WDATA, /* Data is being written */ + EC_FLAGS_NO_OBF1_GPE, /* Don't expect GPE before read */ }; static int acpi_ec_remove(struct acpi_device *device, int type); @@ -179,6 +180,10 @@ static inline int acpi_ec_check_status(struct acpi_ec *ec, enum ec_event event) static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll) { int ret = 0; + + if (unlikely(event == ACPI_EC_EVENT_OBF_1 && + test_bit(EC_FLAGS_NO_OBF1_GPE, &ec->flags))) + force_poll = 1; if (unlikely(test_bit(EC_FLAGS_ADDRESS, &ec->flags) && test_bit(EC_FLAGS_NO_ADDRESS_GPE, &ec->flags))) force_poll = 1; @@ -192,7 +197,12 @@ static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll) goto end; clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags); if (acpi_ec_check_status(ec, event)) { - if (test_bit(EC_FLAGS_ADDRESS, &ec->flags)) { + if (event == ACPI_EC_EVENT_OBF_1) { + /* miss OBF_1 GPE, don't expect it */ + pr_info(PREFIX "missing OBF confirmation, " + "don't expect it any longer.\n"); + set_bit(EC_FLAGS_NO_OBF1_GPE, &ec->flags); + } else if (test_bit(EC_FLAGS_ADDRESS, &ec->flags)) { /* miss address GPE, don't expect it anymore */ pr_info(PREFIX "missing address confirmation, " "don't expect it any longer.\n"); -- cgit v1.2.3-59-g8ed1b From 86dae0154a49b67c908faffeb33ba37eddceba74 Mon Sep 17 00:00:00 2001 From: Márton Németh Date: Wed, 23 Jan 2008 22:33:06 -0500 Subject: ACPI: EC: add leading zeros to debug messages MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add leading zeros to pr_debug() calls. For example if x=0x0a, the format "0x%2x" will result the string "0x a", the format "0x%2.2x" will result "0x0a". Signed-off-by: Márton Németh Signed-off-by: Len Brown --- drivers/acpi/ec.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 8917d754020e..06c9f3520daa 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -139,26 +139,26 @@ static struct acpi_ec { static inline u8 acpi_ec_read_status(struct acpi_ec *ec) { u8 x = inb(ec->command_addr); - pr_debug(PREFIX "---> status = 0x%2x\n", x); + pr_debug(PREFIX "---> status = 0x%2.2x\n", x); return x; } static inline u8 acpi_ec_read_data(struct acpi_ec *ec) { u8 x = inb(ec->data_addr); - pr_debug(PREFIX "---> data = 0x%2x\n", x); + pr_debug(PREFIX "---> data = 0x%2.2x\n", x); return inb(ec->data_addr); } static inline void acpi_ec_write_cmd(struct acpi_ec *ec, u8 command) { - pr_debug(PREFIX "<--- command = 0x%2x\n", command); + pr_debug(PREFIX "<--- command = 0x%2.2x\n", command); outb(command, ec->command_addr); } static inline void acpi_ec_write_data(struct acpi_ec *ec, u8 data) { - pr_debug(PREFIX "<--- data = 0x%2x\n", data); + pr_debug(PREFIX "<--- data = 0x%2.2x\n", data); outb(data, ec->data_addr); } -- cgit v1.2.3-59-g8ed1b From d772b3b323a15588a757f5af28e51a57d0d2f622 Mon Sep 17 00:00:00 2001 From: Márton Németh Date: Wed, 23 Jan 2008 22:34:09 -0500 Subject: ACPI: EC: "DEBUG" needs to be defined earlier MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The "DEBUG" symbol needs to be defined before #including to get the pr_debug() working. Signed-off-by: Márton Németh Signed-off-by: Len Brown --- drivers/acpi/ec.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 06c9f3520daa..987b967c7467 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -26,6 +26,9 @@ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ +/* Uncomment next line to get verbose print outs*/ +/* #define DEBUG */ + #include #include #include @@ -47,9 +50,6 @@ #undef PREFIX #define PREFIX "ACPI: EC: " -/* Uncomment next line to get verbose print outs*/ -/* #define DEBUG */ - /* EC status register */ #define ACPI_EC_FLAG_OBF 0x01 /* Output buffer full */ #define ACPI_EC_FLAG_IBF 0x02 /* Input buffer full */ -- cgit v1.2.3-59-g8ed1b From ec68373c04495edbe39fb94fad963fb781e062e5 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 23 Jan 2008 22:41:20 -0500 Subject: Revert "ACPI: Fan: Drop force_power_state acpi_device option" This reverts commit 93ad7c07ad487b036add8760dabcc35666a550ef. http://bugzilla.kernel.org/show_bug.cgi?id=9798 Signed-off-by: Len Brown --- drivers/acpi/bus.c | 2 +- drivers/acpi/fan.c | 40 ++++++++++++++++++++++++++++++++++++++++ include/acpi/acpi_bus.h | 3 ++- 3 files changed, 43 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index d7a115c362d1..f4487c38d9f2 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -200,7 +200,7 @@ int acpi_bus_set_power(acpi_handle handle, int state) * Get device's current power state */ acpi_bus_get_power(device->handle, &device->power.state); - if (state == device->power.state) { + if ((state == device->power.state) && !device->flags.force_power_state) { ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device is already at D%d\n", state)); return 0; diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c index a5a5532db268..a6e149d692cb 100644 --- a/drivers/acpi/fan.c +++ b/drivers/acpi/fan.c @@ -47,6 +47,8 @@ MODULE_LICENSE("GPL"); static int acpi_fan_add(struct acpi_device *device); static int acpi_fan_remove(struct acpi_device *device, int type); +static int acpi_fan_suspend(struct acpi_device *device, pm_message_t state); +static int acpi_fan_resume(struct acpi_device *device); static const struct acpi_device_id fan_device_ids[] = { {"PNP0C0B", 0}, @@ -61,6 +63,8 @@ static struct acpi_driver acpi_fan_driver = { .ops = { .add = acpi_fan_add, .remove = acpi_fan_remove, + .suspend = acpi_fan_suspend, + .resume = acpi_fan_resume, }, }; @@ -191,6 +195,10 @@ static int acpi_fan_add(struct acpi_device *device) goto end; } + device->flags.force_power_state = 1; + acpi_bus_set_power(device->handle, state); + device->flags.force_power_state = 0; + result = acpi_fan_add_fs(device); if (result) goto end; @@ -216,6 +224,38 @@ static int acpi_fan_remove(struct acpi_device *device, int type) return 0; } +static int acpi_fan_suspend(struct acpi_device *device, pm_message_t state) +{ + if (!device) + return -EINVAL; + + acpi_bus_set_power(device->handle, ACPI_STATE_D0); + + return AE_OK; +} + +static int acpi_fan_resume(struct acpi_device *device) +{ + int result = 0; + int power_state = 0; + + if (!device) + return -EINVAL; + + result = acpi_bus_get_power(device->handle, &power_state); + if (result) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "Error reading fan power state\n")); + return result; + } + + device->flags.force_power_state = 1; + acpi_bus_set_power(device->handle, power_state); + device->flags.force_power_state = 0; + + return result; +} + static int __init acpi_fan_init(void) { int result = 0; diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 19c3ead2a90b..7b74b60a68a4 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -168,7 +168,8 @@ struct acpi_device_flags { u32 power_manageable:1; u32 performance_manageable:1; u32 wake_capable:1; /* Wakeup(_PRW) supported? */ - u32 reserved:20; + u32 force_power_state:1; + u32 reserved:19; }; /* File System */ -- cgit v1.2.3-59-g8ed1b From de195fd0016f9ab85f1d596dca48dade33f26d36 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 23 Jan 2008 21:32:04 -0800 Subject: [SPARC64]: Partially revert "Constify function pointer tables." MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This partially reverts 872e2be7c4056496c2871bd9b0f2fae6c374fe47 (Constify function pointer tables.) The solaris/socksys.c transformation wasn't valid: arch/sparc64/solaris/socksys.c:192: error: assignment of read-only variable ‘socksys_file_ops’ arch/sparc64/solaris/socksys.c:195: error: assignment of read-only variable ‘socksys_file_ops’ arch/sparc64/solaris/socksys.c:196: error: assignment of read-only variable ‘socksys_file_ops’ Signed-off-by: David S. Miller --- arch/sparc64/solaris/socksys.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sparc64/solaris/socksys.c b/arch/sparc64/solaris/socksys.c index 5f064183c874..7736411f244f 100644 --- a/arch/sparc64/solaris/socksys.c +++ b/arch/sparc64/solaris/socksys.c @@ -54,7 +54,7 @@ extern void mykfree(void *); static unsigned int (*sock_poll)(struct file *, poll_table *); -static const struct file_operations socksys_file_ops = { +static struct file_operations socksys_file_ops = { /* Currently empty */ }; -- cgit v1.2.3-59-g8ed1b From fabe874a48de45b137f99b4ed3641e0413f465ce Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Thu, 24 Jan 2008 07:00:45 +0100 Subject: lockdep: fix kernel crash on module unload Michael Wu noticed in his lkml post at http://marc.info/?l=linux-kernel&m=119396182726091&w=2 that certain wireless drivers ended up having their name in module memory, which would then crash the kernel on module unload. The patch he proposed was a bit clumsy in that it increased the size of a lockdep entry significantly; the patch below tries another approach, it checks, on module teardown, if the name of a class is in module space and then zaps the class. This is very similar to what we already do with keys that are in module space. Signed-off-by: Arjan van de Ven Signed-off-by: Ingo Molnar Acked-by: Peter Zijlstra Signed-off-by: Linus Torvalds --- kernel/lockdep.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/kernel/lockdep.c b/kernel/lockdep.c index 4335f12a27c6..e2c07ece367d 100644 --- a/kernel/lockdep.c +++ b/kernel/lockdep.c @@ -2932,7 +2932,7 @@ static void zap_class(struct lock_class *class) } -static inline int within(void *addr, void *start, unsigned long size) +static inline int within(const void *addr, void *start, unsigned long size) { return addr >= start && addr < start + size; } @@ -2955,9 +2955,12 @@ void lockdep_free_key_range(void *start, unsigned long size) head = classhash_table + i; if (list_empty(head)) continue; - list_for_each_entry_safe(class, next, head, hash_entry) + list_for_each_entry_safe(class, next, head, hash_entry) { if (within(class->key, start, size)) zap_class(class); + else if (within(class->name, start, size)) + zap_class(class); + } } if (locked) -- cgit v1.2.3-59-g8ed1b From c2f3dabefa73fe3307578553f456e93f0a1bca08 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Thu, 24 Jan 2008 05:52:13 -0800 Subject: sysctl: kill binary sysctl KERN_PPC_L2CR : Stefan Roese said: > ppc: 4xx: sysctl table check failed: /kernel/l2cr .1.31 Missing strategy > > I'm seeing this error message when booting an recent arch/ppc kernel on > 4xx platforms (tested on Ocotea and other 4xx platforms). Booting NFS > rootfs still works fine, but this message kind of makes me "nervous". > This is not seen on 4xx arch/powerpc platforms. Here the bootlog: Because the data field was never filled and a binary sysctl handler was never written this sysctl has never been usable through the sys_sysctl interface. So just remove the binary sysctl number. Making the kernel sanity checks happy. Signed-off-by: Eric W. Biederman Reported-by: Stefan Roese Cc: Josh Boyer Cc: Wolfgang Denk Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/kernel/ppc_htab.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/ppc/kernel/ppc_htab.c b/arch/ppc/kernel/ppc_htab.c index aa07b63c0a6c..9ed36dd9cbff 100644 --- a/arch/ppc/kernel/ppc_htab.c +++ b/arch/ppc/kernel/ppc_htab.c @@ -436,7 +436,6 @@ int proc_dol2crvec(ctl_table *table, int write, struct file *filp, */ static ctl_table htab_ctl_table[]={ { - .ctl_name = KERN_PPC_L2CR, .procname = "l2cr", .mode = 0644, .proc_handler = &proc_dol2crvec, -- cgit v1.2.3-59-g8ed1b From c5c99429fa57dcf6e05203ebe3676db1ec646793 Mon Sep 17 00:00:00 2001 From: Larry Woodman Date: Thu, 24 Jan 2008 05:49:25 -0800 Subject: fix hugepages leak due to pagetable page sharing The shared page table code for hugetlb memory on x86 and x86_64 is causing a leak. When a user of hugepages exits using this code the system leaks some of the hugepages. ------------------------------------------------------- Part of /proc/meminfo just before database startup: HugePages_Total: 5500 HugePages_Free: 5500 HugePages_Rsvd: 0 Hugepagesize: 2048 kB Just before shutdown: HugePages_Total: 5500 HugePages_Free: 4475 HugePages_Rsvd: 0 Hugepagesize: 2048 kB After shutdown: HugePages_Total: 5500 HugePages_Free: 4988 HugePages_Rsvd: 0 Hugepagesize: 2048 kB ---------------------------------------------------------- The problem occurs durring a fork, in copy_hugetlb_page_range(). It locates the dst_pte using huge_pte_alloc(). Since huge_pte_alloc() calls huge_pmd_share() it will share the pmd page if can, yet the main loop in copy_hugetlb_page_range() does a get_page() on every hugepage. This is a violation of the shared hugepmd pagetable protocol and creates additional referenced to the hugepages causing a leak when the unmap of the VMA occurs. We can skip the entire replication of the ptes when the hugepage pagetables are shared. The attached patch skips copying the ptes and the get_page() calls if the hugetlbpage pagetable is shared. [akpm@linux-foundation.org: coding-style cleanups] Signed-off-by: Larry Woodman Signed-off-by: Adam Litke Cc: Badari Pulavarty Cc: Ken Chen Cc: David Gibson Cc: William Lee Irwin III Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index e0fda156f021..db861d8b6c28 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -699,6 +699,11 @@ int copy_hugetlb_page_range(struct mm_struct *dst, struct mm_struct *src, dst_pte = huge_pte_alloc(dst, addr); if (!dst_pte) goto nomem; + + /* If the pagetables are shared don't copy or take references */ + if (dst_pte == src_pte) + continue; + spin_lock(&dst->page_table_lock); spin_lock(&src->page_table_lock); if (!pte_none(*src_pte)) { -- cgit v1.2.3-59-g8ed1b From 9c09a95cf431fcf5720f2e408befa24b32b8cf4d Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Thu, 24 Jan 2008 05:49:54 -0800 Subject: slab: partially revert list3 changes Partial revert the changes made by 04231b3002ac53f8a64a7bd142fde3fa4b6808c6 to the kmem_list3 management. On a machine with a memoryless node, this BUG_ON was triggering static void *____cache_alloc_node(struct kmem_cache *cachep, gfp_t flags, int nodeid) { struct list_head *entry; struct slab *slabp; struct kmem_list3 *l3; void *obj; int x; l3 = cachep->nodelists[nodeid]; BUG_ON(!l3); Signed-off-by: Mel Gorman Cc: Pekka Enberg Acked-by: Christoph Lameter Cc: "Aneesh Kumar K.V" Cc: Nishanth Aravamudan Cc: KAMEZAWA Hiroyuki Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/slab.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/mm/slab.c b/mm/slab.c index aebb9f68557a..b03b2e46b806 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -1590,7 +1590,7 @@ void __init kmem_cache_init(void) /* Replace the static kmem_list3 structures for the boot cpu */ init_list(&cache_cache, &initkmem_list3[CACHE_CACHE], node); - for_each_node_state(nid, N_NORMAL_MEMORY) { + for_each_online_node(nid) { init_list(malloc_sizes[INDEX_AC].cs_cachep, &initkmem_list3[SIZE_AC + nid], nid); @@ -1968,7 +1968,7 @@ static void __init set_up_list3s(struct kmem_cache *cachep, int index) { int node; - for_each_node_state(node, N_NORMAL_MEMORY) { + for_each_online_node(node) { cachep->nodelists[node] = &initkmem_list3[index + node]; cachep->nodelists[node]->next_reap = jiffies + REAPTIMEOUT_LIST3 + @@ -3815,7 +3815,7 @@ static int alloc_kmemlist(struct kmem_cache *cachep) struct array_cache *new_shared; struct array_cache **new_alien = NULL; - for_each_node_state(node, N_NORMAL_MEMORY) { + for_each_online_node(node) { if (use_alien_caches) { new_alien = alloc_alien_cache(node, cachep->limit); -- cgit v1.2.3-59-g8ed1b From dbcc2ec60fe15448e5dfe4153f7347ac82b4da73 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 24 Jan 2008 13:35:10 -0800 Subject: Revert "mac80211: warn when receiving frames with unaligned data" This reverts commit 81100eb80add328c4d2a377326f15aa0e7236398 for the release, to avoid the unnecessary warning noise that is only really relevant to wireless driver developers. The warning will probably go right back in after I cut the release, but at least we won't unnecessarily worry users. Acked-by: John W. Linville Signed-off-by: Linus Torvalds --- net/mac80211/rx.c | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index a7263fc476bd..00f908d9275e 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1443,7 +1443,6 @@ void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb, struct ieee80211_sub_if_data *prev = NULL; struct sk_buff *skb_new; u8 *bssid; - int hdrlen; /* * key references and virtual interfaces are protected using RCU @@ -1473,18 +1472,6 @@ void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb, rx.fc = le16_to_cpu(hdr->frame_control); type = rx.fc & IEEE80211_FCTL_FTYPE; - /* - * Drivers are required to align the payload data to a four-byte - * boundary, so the last two bits of the address where it starts - * may not be set. The header is required to be directly before - * the payload data, padding like atheros hardware adds which is - * inbetween the 802.11 header and the payload is not supported, - * the driver is required to move the 802.11 header further back - * in that case. - */ - hdrlen = ieee80211_get_hdrlen(rx.fc); - WARN_ON_ONCE(((unsigned long)(skb->data + hdrlen)) & 3); - if (type == IEEE80211_FTYPE_DATA || type == IEEE80211_FTYPE_MGMT) local->dot11ReceivedFragmentCount++; -- cgit v1.2.3-59-g8ed1b From feed9bab7b14b77be8d796bcee95e2343fb82955 Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Thu, 24 Jan 2008 14:00:40 -0800 Subject: spi: omap2_mcspi PIO RX fix Before transmission of the last word in PIO RX_ONLY mode rx+tx mode is enabled: /* prevent last RX_ONLY read from triggering * more word i/o: switch to rx+tx */ if (c == 0 && tx == NULL) mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, l); But because c is decremented after the test, c will never be zero and rx+tx will not be enabled. This breaks RX_ONLY mode PIO transfers. Fix it by decrementing c in the beginning of the various I/O loops. Signed-off-by: Kalle Valo Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/omap2_mcspi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c index 3cdab131c4a9..ea61724ae225 100644 --- a/drivers/spi/omap2_mcspi.c +++ b/drivers/spi/omap2_mcspi.c @@ -350,6 +350,7 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) tx = xfer->tx_buf; do { + c -= 1; if (tx != NULL) { if (mcspi_wait_for_reg_bit(chstat_reg, OMAP2_MCSPI_CHSTAT_TXS) < 0) { @@ -380,7 +381,6 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) word_len, *(rx - 1)); #endif } - c -= 1; } while (c); } else if (word_len <= 16) { u16 *rx; @@ -389,6 +389,7 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) rx = xfer->rx_buf; tx = xfer->tx_buf; do { + c -= 2; if (tx != NULL) { if (mcspi_wait_for_reg_bit(chstat_reg, OMAP2_MCSPI_CHSTAT_TXS) < 0) { @@ -419,7 +420,6 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) word_len, *(rx - 1)); #endif } - c -= 2; } while (c); } else if (word_len <= 32) { u32 *rx; @@ -428,6 +428,7 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) rx = xfer->rx_buf; tx = xfer->tx_buf; do { + c -= 4; if (tx != NULL) { if (mcspi_wait_for_reg_bit(chstat_reg, OMAP2_MCSPI_CHSTAT_TXS) < 0) { @@ -458,7 +459,6 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) word_len, *(rx - 1)); #endif } - c -= 4; } while (c); } -- cgit v1.2.3-59-g8ed1b From 5c5e32ceeb6b64496a1842d5d99e4ac8d20166c4 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Thu, 24 Jan 2008 16:13:21 -0600 Subject: mount options: fix jfs Add iocharset= and errors= options to /proc/mounts for jfs filesystems. Signed-off-by: Miklos Szeredi Signed-off-by: Dave Kleikamp --- fs/jfs/super.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/jfs/super.c b/fs/jfs/super.c index 314bb4ff1ba8..70a14001c98f 100644 --- a/fs/jfs/super.c +++ b/fs/jfs/super.c @@ -598,6 +598,12 @@ static int jfs_show_options(struct seq_file *seq, struct vfsmount *vfs) seq_printf(seq, ",umask=%03o", sbi->umask); if (sbi->flag & JFS_NOINTEGRITY) seq_puts(seq, ",nointegrity"); + if (sbi->nls_tab) + seq_printf(seq, ",iocharset=%s", sbi->nls_tab->charset); + if (sbi->flag & JFS_ERR_CONTINUE) + seq_printf(seq, ",errors=continue"); + if (sbi->flag & JFS_ERR_PANIC) + seq_printf(seq, ",errors=panic"); #ifdef CONFIG_QUOTA if (sbi->flag & JFS_USRQUOTA) -- cgit v1.2.3-59-g8ed1b From 49914084e797530d9baaf51df9eda77babc98fa8 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 24 Jan 2008 14:58:37 -0800 Subject: Linux 2.6.24 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index ce641ebee25a..189d8ef416e6 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 24 -EXTRAVERSION = -rc8 +EXTRAVERSION = NAME = Arr Matey! A Hairy Bilge Rat! # *DOCUMENTATION* -- cgit v1.2.3-59-g8ed1b From 19c5fc198c369bb00f3ed9716ef40648865d8d94 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 19 Nov 2007 17:53:44 -0800 Subject: security/selinux: Add missing "space" Add missing space. Signed-off-by: Joe Perches Signed-off-by: James Morris --- security/selinux/ss/avtab.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/security/selinux/ss/avtab.c b/security/selinux/ss/avtab.c index 9e70a160d7da..cd10e27fc9e6 100644 --- a/security/selinux/ss/avtab.c +++ b/security/selinux/ss/avtab.c @@ -280,7 +280,7 @@ int avtab_alloc(struct avtab *h, u32 nrules) h->nel = 0; h->nslot = nslot; h->mask = mask; - printk(KERN_DEBUG "SELinux:%d avtab hash slots allocated." + printk(KERN_DEBUG "SELinux:%d avtab hash slots allocated. " "Num of rules:%d\n", h->nslot, nrules); return 0; } -- cgit v1.2.3-59-g8ed1b From c9180a57a9ab2d5525faf8815a332364ee9e89b7 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Fri, 30 Nov 2007 13:00:35 -0500 Subject: Security: add get, set, and cloning of superblock security information Adds security_get_sb_mnt_opts, security_set_sb_mnt_opts, and security_clont_sb_mnt_opts to the LSM and to SELinux. This will allow filesystems to directly own and control all of their mount options if they so choose. This interface deals only with option identifiers and strings so it should generic enough for any LSM which may come in the future. Filesystems which pass text mount data around in the kernel (almost all of them) need not currently make use of this interface when dealing with SELinux since it will still parse those strings as it always has. I assume future LSM's would do the same. NFS is the primary FS which does not use text mount data and thus must make use of this interface. An LSM would need to implement these functions only if they had mount time options, such as selinux has context= or fscontext=. If the LSM has no mount time options they could simply not implement and let the dummy ops take care of things. An LSM other than SELinux would need to define new option numbers in security.h and any FS which decides to own there own security options would need to be patched to use this new interface for every possible LSM. This is because it was stated to me very clearly that LSM's should not attempt to understand FS mount data and the burdon to understand security should be in the FS which owns the options. Signed-off-by: Eric Paris Acked-by: Stephen D. Smalley Signed-off-by: James Morris --- include/linux/security.h | 36 ++ security/dummy.c | 26 ++ security/security.c | 20 + security/selinux/hooks.c | 748 +++++++++++++++++++++++++------------- security/selinux/include/objsec.h | 1 + 5 files changed, 577 insertions(+), 254 deletions(-) diff --git a/include/linux/security.h b/include/linux/security.h index ac050830a873..cbd970a735f2 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -34,6 +34,12 @@ #include #include +/* only a char in selinux superblock security struct flags */ +#define FSCONTEXT_MNT 0x01 +#define CONTEXT_MNT 0x02 +#define ROOTCONTEXT_MNT 0x04 +#define DEFCONTEXT_MNT 0x08 + /* * Bounding set */ @@ -261,6 +267,22 @@ struct request_sock; * Update module state after a successful pivot. * @old_nd contains the nameidata structure for the old root. * @new_nd contains the nameidata structure for the new root. + * @sb_get_mnt_opts: + * Get the security relevant mount options used for a superblock + * @sb the superblock to get security mount options from + * @mount_options array for pointers to mount options + * @mount_flags array of ints specifying what each mount options is + * @num_opts number of options in the arrays + * @sb_set_mnt_opts: + * Set the security relevant mount options used for a superblock + * @sb the superblock to set security mount options for + * @mount_options array for pointers to mount options + * @mount_flags array of ints specifying what each mount options is + * @num_opts number of options in the arrays + * @sb_clone_mnt_opts: + * Copy all security options from a given superblock to another + * @oldsb old superblock which contain information to clone + * @newsb new superblock which needs filled in * * Security hooks for inode operations. * @@ -1242,6 +1264,13 @@ struct security_operations { struct nameidata * new_nd); void (*sb_post_pivotroot) (struct nameidata * old_nd, struct nameidata * new_nd); + int (*sb_get_mnt_opts) (const struct super_block *sb, + char ***mount_options, int **flags, + int *num_opts); + int (*sb_set_mnt_opts) (struct super_block *sb, char **mount_options, + int *flags, int num_opts); + void (*sb_clone_mnt_opts) (const struct super_block *oldsb, + struct super_block *newsb); int (*inode_alloc_security) (struct inode *inode); void (*inode_free_security) (struct inode *inode); @@ -1499,6 +1528,13 @@ void security_sb_post_mountroot(void); void security_sb_post_addmount(struct vfsmount *mnt, struct nameidata *mountpoint_nd); int security_sb_pivotroot(struct nameidata *old_nd, struct nameidata *new_nd); void security_sb_post_pivotroot(struct nameidata *old_nd, struct nameidata *new_nd); +int security_sb_get_mnt_opts(const struct super_block *sb, char ***mount_options, + int **flags, int *num_opts); +int security_sb_set_mnt_opts(struct super_block *sb, char **mount_options, + int *flags, int num_opts); +void security_sb_clone_mnt_opts(const struct super_block *oldsb, + struct super_block *newsb); + int security_inode_alloc(struct inode *inode); void security_inode_free(struct inode *inode); int security_inode_init_security(struct inode *inode, struct inode *dir, diff --git a/security/dummy.c b/security/dummy.c index 3ccfbbe973b6..a3b29d0d00e5 100644 --- a/security/dummy.c +++ b/security/dummy.c @@ -245,6 +245,29 @@ static void dummy_sb_post_pivotroot (struct nameidata *old_nd, struct nameidata return; } +static int dummy_sb_get_mnt_opts(const struct super_block *sb, char ***mount_options, + int **flags, int *num_opts) +{ + *mount_options = NULL; + *flags = NULL; + *num_opts = 0; + return 0; +} + +static int dummy_sb_set_mnt_opts(struct super_block *sb, char **mount_options, + int *flags, int num_opts) +{ + if (unlikely(num_opts)) + return -EOPNOTSUPP; + return 0; +} + +static void dummy_sb_clone_mnt_opts(const struct super_block *oldsb, + struct super_block *newsb) +{ + return; +} + static int dummy_inode_alloc_security (struct inode *inode) { return 0; @@ -998,6 +1021,9 @@ void security_fixup_ops (struct security_operations *ops) set_to_dummy_if_null(ops, sb_post_addmount); set_to_dummy_if_null(ops, sb_pivotroot); set_to_dummy_if_null(ops, sb_post_pivotroot); + set_to_dummy_if_null(ops, sb_get_mnt_opts); + set_to_dummy_if_null(ops, sb_set_mnt_opts); + set_to_dummy_if_null(ops, sb_clone_mnt_opts); set_to_dummy_if_null(ops, inode_alloc_security); set_to_dummy_if_null(ops, inode_free_security); set_to_dummy_if_null(ops, inode_init_security); diff --git a/security/security.c b/security/security.c index 0e1f1f124368..b13b54f0af85 100644 --- a/security/security.c +++ b/security/security.c @@ -308,6 +308,26 @@ void security_sb_post_pivotroot(struct nameidata *old_nd, struct nameidata *new_ security_ops->sb_post_pivotroot(old_nd, new_nd); } +int security_sb_get_mnt_opts(const struct super_block *sb, + char ***mount_options, + int **flags, int *num_opts) +{ + return security_ops->sb_get_mnt_opts(sb, mount_options, flags, num_opts); +} + +int security_sb_set_mnt_opts(struct super_block *sb, + char **mount_options, + int *flags, int num_opts) +{ + return security_ops->sb_set_mnt_opts(sb, mount_options, flags, num_opts); +} + +void security_sb_clone_mnt_opts(const struct super_block *oldsb, + struct super_block *newsb) +{ + security_ops->sb_clone_mnt_opts(oldsb, newsb); +} + int security_inode_alloc(struct inode *inode) { inode->i_security = NULL; diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 9f3124b08867..233c8b97462f 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -82,6 +82,8 @@ #define XATTR_SELINUX_SUFFIX "selinux" #define XATTR_NAME_SELINUX XATTR_SECURITY_PREFIX XATTR_SELINUX_SUFFIX +#define NUM_SEL_MNT_OPTS 4 + extern unsigned int policydb_loaded_version; extern int selinux_nlmsg_lookup(u16 sclass, u16 nlmsg_type, u32 *perm); extern int selinux_compat_net; @@ -321,8 +323,8 @@ enum { Opt_error = -1, Opt_context = 1, Opt_fscontext = 2, - Opt_defcontext = 4, - Opt_rootcontext = 8, + Opt_defcontext = 3, + Opt_rootcontext = 4, }; static match_table_t tokens = { @@ -366,150 +368,317 @@ static int may_context_mount_inode_relabel(u32 sid, return rc; } -static int try_context_mount(struct super_block *sb, void *data) +static int sb_finish_set_opts(struct super_block *sb) { - char *context = NULL, *defcontext = NULL; - char *fscontext = NULL, *rootcontext = NULL; - const char *name; - u32 sid; - int alloc = 0, rc = 0, seen = 0; - struct task_security_struct *tsec = current->security; struct superblock_security_struct *sbsec = sb->s_security; + struct dentry *root = sb->s_root; + struct inode *root_inode = root->d_inode; + int rc = 0; - if (!data) - goto out; + if (sbsec->behavior == SECURITY_FS_USE_XATTR) { + /* Make sure that the xattr handler exists and that no + error other than -ENODATA is returned by getxattr on + the root directory. -ENODATA is ok, as this may be + the first boot of the SELinux kernel before we have + assigned xattr values to the filesystem. */ + if (!root_inode->i_op->getxattr) { + printk(KERN_WARNING "SELinux: (dev %s, type %s) has no " + "xattr support\n", sb->s_id, sb->s_type->name); + rc = -EOPNOTSUPP; + goto out; + } + rc = root_inode->i_op->getxattr(root, XATTR_NAME_SELINUX, NULL, 0); + if (rc < 0 && rc != -ENODATA) { + if (rc == -EOPNOTSUPP) + printk(KERN_WARNING "SELinux: (dev %s, type " + "%s) has no security xattr handler\n", + sb->s_id, sb->s_type->name); + else + printk(KERN_WARNING "SELinux: (dev %s, type " + "%s) getxattr errno %d\n", sb->s_id, + sb->s_type->name, -rc); + goto out; + } + } - name = sb->s_type->name; + sbsec->initialized = 1; - if (sb->s_type->fs_flags & FS_BINARY_MOUNTDATA) { + if (sbsec->behavior > ARRAY_SIZE(labeling_behaviors)) + printk(KERN_ERR "SELinux: initialized (dev %s, type %s), unknown behavior\n", + sb->s_id, sb->s_type->name); + else + printk(KERN_DEBUG "SELinux: initialized (dev %s, type %s), %s\n", + sb->s_id, sb->s_type->name, + labeling_behaviors[sbsec->behavior-1]); - /* NFS we understand. */ - if (!strcmp(name, "nfs")) { - struct nfs_mount_data *d = data; + /* Initialize the root inode. */ + rc = inode_doinit_with_dentry(root_inode, root); - if (d->version < NFS_MOUNT_VERSION) - goto out; + /* Initialize any other inodes associated with the superblock, e.g. + inodes created prior to initial policy load or inodes created + during get_sb by a pseudo filesystem that directly + populates itself. */ + spin_lock(&sbsec->isec_lock); +next_inode: + if (!list_empty(&sbsec->isec_head)) { + struct inode_security_struct *isec = + list_entry(sbsec->isec_head.next, + struct inode_security_struct, list); + struct inode *inode = isec->inode; + spin_unlock(&sbsec->isec_lock); + inode = igrab(inode); + if (inode) { + if (!IS_PRIVATE(inode)) + inode_doinit(inode); + iput(inode); + } + spin_lock(&sbsec->isec_lock); + list_del_init(&isec->list); + goto next_inode; + } + spin_unlock(&sbsec->isec_lock); +out: + return rc; +} - if (d->context[0]) { - context = d->context; - seen |= Opt_context; - } - } else - goto out; +/* + * This function should allow an FS to ask what it's mount security + * options were so it can use those later for submounts, displaying + * mount options, or whatever. + */ +static int selinux_get_mnt_opts(const struct super_block *sb, + char ***mount_options, int **mnt_opts_flags, + int *num_opts) +{ + int rc = 0, i; + struct superblock_security_struct *sbsec = sb->s_security; + char *context = NULL; + u32 len; + char tmp; - } else { - /* Standard string-based options. */ - char *p, *options = data; + *num_opts = 0; + *mount_options = NULL; + *mnt_opts_flags = NULL; - while ((p = strsep(&options, "|")) != NULL) { - int token; - substring_t args[MAX_OPT_ARGS]; + if (!sbsec->initialized) + return -EINVAL; - if (!*p) - continue; + if (!ss_initialized) + return -EINVAL; - token = match_token(p, tokens, args); + /* + * if we ever use sbsec flags for anything other than tracking mount + * settings this is going to need a mask + */ + tmp = sbsec->flags; + /* count the number of mount options for this sb */ + for (i = 0; i < 8; i++) { + if (tmp & 0x01) + (*num_opts)++; + tmp >>= 1; + } - switch (token) { - case Opt_context: - if (seen & (Opt_context|Opt_defcontext)) { - rc = -EINVAL; - printk(KERN_WARNING SEL_MOUNT_FAIL_MSG); - goto out_free; - } - context = match_strdup(&args[0]); - if (!context) { - rc = -ENOMEM; - goto out_free; - } - if (!alloc) - alloc = 1; - seen |= Opt_context; - break; + *mount_options = kcalloc(*num_opts, sizeof(char *), GFP_ATOMIC); + if (!*mount_options) { + rc = -ENOMEM; + goto out_free; + } - case Opt_fscontext: - if (seen & Opt_fscontext) { - rc = -EINVAL; - printk(KERN_WARNING SEL_MOUNT_FAIL_MSG); - goto out_free; - } - fscontext = match_strdup(&args[0]); - if (!fscontext) { - rc = -ENOMEM; - goto out_free; - } - if (!alloc) - alloc = 1; - seen |= Opt_fscontext; - break; + *mnt_opts_flags = kcalloc(*num_opts, sizeof(int), GFP_ATOMIC); + if (!*mnt_opts_flags) { + rc = -ENOMEM; + goto out_free; + } - case Opt_rootcontext: - if (seen & Opt_rootcontext) { - rc = -EINVAL; - printk(KERN_WARNING SEL_MOUNT_FAIL_MSG); - goto out_free; - } - rootcontext = match_strdup(&args[0]); - if (!rootcontext) { - rc = -ENOMEM; - goto out_free; - } - if (!alloc) - alloc = 1; - seen |= Opt_rootcontext; - break; + i = 0; + if (sbsec->flags & FSCONTEXT_MNT) { + rc = security_sid_to_context(sbsec->sid, &context, &len); + if (rc) + goto out_free; + (*mount_options)[i] = context; + (*mnt_opts_flags)[i++] = FSCONTEXT_MNT; + } + if (sbsec->flags & CONTEXT_MNT) { + rc = security_sid_to_context(sbsec->mntpoint_sid, &context, &len); + if (rc) + goto out_free; + (*mount_options)[i] = context; + (*mnt_opts_flags)[i++] = CONTEXT_MNT; + } + if (sbsec->flags & DEFCONTEXT_MNT) { + rc = security_sid_to_context(sbsec->def_sid, &context, &len); + if (rc) + goto out_free; + (*mount_options)[i] = context; + (*mnt_opts_flags)[i++] = DEFCONTEXT_MNT; + } + if (sbsec->flags & ROOTCONTEXT_MNT) { + struct inode *root = sbsec->sb->s_root->d_inode; + struct inode_security_struct *isec = root->i_security; - case Opt_defcontext: - if (sbsec->behavior != SECURITY_FS_USE_XATTR) { - rc = -EINVAL; - printk(KERN_WARNING "SELinux: " - "defcontext option is invalid " - "for this filesystem type\n"); - goto out_free; - } - if (seen & (Opt_context|Opt_defcontext)) { - rc = -EINVAL; - printk(KERN_WARNING SEL_MOUNT_FAIL_MSG); - goto out_free; - } - defcontext = match_strdup(&args[0]); - if (!defcontext) { - rc = -ENOMEM; - goto out_free; - } - if (!alloc) - alloc = 1; - seen |= Opt_defcontext; - break; + rc = security_sid_to_context(isec->sid, &context, &len); + if (rc) + goto out_free; + (*mount_options)[i] = context; + (*mnt_opts_flags)[i++] = ROOTCONTEXT_MNT; + } - default: - rc = -EINVAL; - printk(KERN_WARNING "SELinux: unknown mount " - "option\n"); - goto out_free; + BUG_ON(i != *num_opts); - } - } - } + return 0; + +out_free: + /* don't leak context string if security_sid_to_context had an error */ + if (*mount_options && i) + for (; i > 0; i--) + kfree((*mount_options)[i-1]); + kfree(*mount_options); + *mount_options = NULL; + kfree(*mnt_opts_flags); + *mnt_opts_flags = NULL; + *num_opts = 0; + return rc; +} + +static int bad_option(struct superblock_security_struct *sbsec, char flag, + u32 old_sid, u32 new_sid) +{ + /* check if the old mount command had the same options */ + if (sbsec->initialized) + if (!(sbsec->flags & flag) || + (old_sid != new_sid)) + return 1; + + /* check if we were passed the same options twice, + * aka someone passed context=a,context=b + */ + if (!sbsec->initialized) + if (sbsec->flags & flag) + return 1; + return 0; +} +/* + * Allow filesystems with binary mount data to explicitly set mount point + * labeling information. + */ +int selinux_set_mnt_opts(struct super_block *sb, char **mount_options, + int *flags, int num_opts) +{ + int rc = 0, i; + struct task_security_struct *tsec = current->security; + struct superblock_security_struct *sbsec = sb->s_security; + const char *name = sb->s_type->name; + struct inode *inode = sbsec->sb->s_root->d_inode; + struct inode_security_struct *root_isec = inode->i_security; + u32 fscontext_sid = 0, context_sid = 0, rootcontext_sid = 0; + u32 defcontext_sid = 0; - if (!seen) + mutex_lock(&sbsec->lock); + + if (!ss_initialized) { + if (!num_opts) { + /* Defer initialization until selinux_complete_init, + after the initial policy is loaded and the security + server is ready to handle calls. */ + spin_lock(&sb_security_lock); + if (list_empty(&sbsec->list)) + list_add(&sbsec->list, &superblock_security_head); + spin_unlock(&sb_security_lock); + goto out; + } + rc = -EINVAL; + printk(KERN_WARNING "Unable to set superblock options before " + "the security server is initialized\n"); goto out; + } - /* sets the context of the superblock for the fs being mounted. */ - if (fscontext) { - rc = security_context_to_sid(fscontext, strlen(fscontext), &sid); + /* + * parse the mount options, check if they are valid sids. + * also check if someone is trying to mount the same sb more + * than once with different security options. + */ + for (i = 0; i < num_opts; i++) { + u32 sid; + rc = security_context_to_sid(mount_options[i], + strlen(mount_options[i]), &sid); if (rc) { printk(KERN_WARNING "SELinux: security_context_to_sid" "(%s) failed for (dev %s, type %s) errno=%d\n", - fscontext, sb->s_id, name, rc); - goto out_free; + mount_options[i], sb->s_id, name, rc); + goto out; + } + switch (flags[i]) { + case FSCONTEXT_MNT: + fscontext_sid = sid; + + if (bad_option(sbsec, FSCONTEXT_MNT, sbsec->sid, + fscontext_sid)) + goto out_double_mount; + + sbsec->flags |= FSCONTEXT_MNT; + break; + case CONTEXT_MNT: + context_sid = sid; + + if (bad_option(sbsec, CONTEXT_MNT, sbsec->mntpoint_sid, + context_sid)) + goto out_double_mount; + + sbsec->flags |= CONTEXT_MNT; + break; + case ROOTCONTEXT_MNT: + rootcontext_sid = sid; + + if (bad_option(sbsec, ROOTCONTEXT_MNT, root_isec->sid, + rootcontext_sid)) + goto out_double_mount; + + sbsec->flags |= ROOTCONTEXT_MNT; + + break; + case DEFCONTEXT_MNT: + defcontext_sid = sid; + + if (bad_option(sbsec, DEFCONTEXT_MNT, sbsec->def_sid, + defcontext_sid)) + goto out_double_mount; + + sbsec->flags |= DEFCONTEXT_MNT; + + break; + default: + rc = -EINVAL; + goto out; } + } + + if (sbsec->initialized) { + /* previously mounted with options, but not on this attempt? */ + if (sbsec->flags && !num_opts) + goto out_double_mount; + rc = 0; + goto out; + } - rc = may_context_mount_sb_relabel(sid, sbsec, tsec); + if (strcmp(sb->s_type->name, "proc") == 0) + sbsec->proc = 1; + + /* Determine the labeling behavior to use for this filesystem type. */ + rc = security_fs_use(sb->s_type->name, &sbsec->behavior, &sbsec->sid); + if (rc) { + printk(KERN_WARNING "%s: security_fs_use(%s) returned %d\n", + __FUNCTION__, sb->s_type->name, rc); + goto out; + } + + /* sets the context of the superblock for the fs being mounted. */ + if (fscontext_sid) { + + rc = may_context_mount_sb_relabel(fscontext_sid, sbsec, tsec); if (rc) - goto out_free; + goto out; - sbsec->sid = sid; + sbsec->sid = fscontext_sid; } /* @@ -517,182 +686,250 @@ static int try_context_mount(struct super_block *sb, void *data) * sets the label used on all file below the mountpoint, and will set * the superblock context if not already set. */ - if (context) { - rc = security_context_to_sid(context, strlen(context), &sid); - if (rc) { - printk(KERN_WARNING "SELinux: security_context_to_sid" - "(%s) failed for (dev %s, type %s) errno=%d\n", - context, sb->s_id, name, rc); - goto out_free; - } - - if (!fscontext) { - rc = may_context_mount_sb_relabel(sid, sbsec, tsec); + if (context_sid) { + if (!fscontext_sid) { + rc = may_context_mount_sb_relabel(context_sid, sbsec, tsec); if (rc) - goto out_free; - sbsec->sid = sid; + goto out; + sbsec->sid = context_sid; } else { - rc = may_context_mount_inode_relabel(sid, sbsec, tsec); + rc = may_context_mount_inode_relabel(context_sid, sbsec, tsec); if (rc) - goto out_free; + goto out; } - sbsec->mntpoint_sid = sid; + if (!rootcontext_sid) + rootcontext_sid = context_sid; + sbsec->mntpoint_sid = context_sid; sbsec->behavior = SECURITY_FS_USE_MNTPOINT; } - if (rootcontext) { - struct inode *inode = sb->s_root->d_inode; - struct inode_security_struct *isec = inode->i_security; - rc = security_context_to_sid(rootcontext, strlen(rootcontext), &sid); - if (rc) { - printk(KERN_WARNING "SELinux: security_context_to_sid" - "(%s) failed for (dev %s, type %s) errno=%d\n", - rootcontext, sb->s_id, name, rc); - goto out_free; - } - - rc = may_context_mount_inode_relabel(sid, sbsec, tsec); + if (rootcontext_sid) { + rc = may_context_mount_inode_relabel(rootcontext_sid, sbsec, tsec); if (rc) - goto out_free; + goto out; - isec->sid = sid; - isec->initialized = 1; + root_isec->sid = rootcontext_sid; + root_isec->initialized = 1; } - if (defcontext) { - rc = security_context_to_sid(defcontext, strlen(defcontext), &sid); - if (rc) { - printk(KERN_WARNING "SELinux: security_context_to_sid" - "(%s) failed for (dev %s, type %s) errno=%d\n", - defcontext, sb->s_id, name, rc); - goto out_free; + if (defcontext_sid) { + if (sbsec->behavior != SECURITY_FS_USE_XATTR) { + rc = -EINVAL; + printk(KERN_WARNING "SELinux: defcontext option is " + "invalid for this filesystem type\n"); + goto out; } - if (sid == sbsec->def_sid) - goto out_free; - - rc = may_context_mount_inode_relabel(sid, sbsec, tsec); - if (rc) - goto out_free; + if (defcontext_sid != sbsec->def_sid) { + rc = may_context_mount_inode_relabel(defcontext_sid, + sbsec, tsec); + if (rc) + goto out; + } - sbsec->def_sid = sid; + sbsec->def_sid = defcontext_sid; } -out_free: - if (alloc) { - kfree(context); - kfree(defcontext); - kfree(fscontext); - kfree(rootcontext); - } + rc = sb_finish_set_opts(sb); out: + mutex_unlock(&sbsec->lock); return rc; +out_double_mount: + rc = -EINVAL; + printk(KERN_WARNING "SELinux: mount invalid. Same superblock, different " + "security settings for (dev %s, type %s)\n", sb->s_id, name); + goto out; } -static int superblock_doinit(struct super_block *sb, void *data) +static void selinux_sb_clone_mnt_opts(const struct super_block *oldsb, + struct super_block *newsb) { - struct superblock_security_struct *sbsec = sb->s_security; - struct dentry *root = sb->s_root; - struct inode *inode = root->d_inode; - int rc = 0; + const struct superblock_security_struct *oldsbsec = oldsb->s_security; + struct superblock_security_struct *newsbsec = newsb->s_security; - mutex_lock(&sbsec->lock); - if (sbsec->initialized) - goto out; + int set_fscontext = (oldsbsec->flags & FSCONTEXT_MNT); + int set_context = (oldsbsec->flags & CONTEXT_MNT); + int set_rootcontext = (oldsbsec->flags & ROOTCONTEXT_MNT); - if (!ss_initialized) { - /* Defer initialization until selinux_complete_init, - after the initial policy is loaded and the security - server is ready to handle calls. */ - spin_lock(&sb_security_lock); - if (list_empty(&sbsec->list)) - list_add(&sbsec->list, &superblock_security_head); - spin_unlock(&sb_security_lock); - goto out; + /* we can't error, we can't save the info, this shouldn't get called + * this early in the boot process. */ + BUG_ON(!ss_initialized); + + /* this might go away sometime down the line if there is a new user + * of clone, but for now, nfs better not get here... */ + BUG_ON(newsbsec->initialized); + + /* how can we clone if the old one wasn't set up?? */ + BUG_ON(!oldsbsec->initialized); + + mutex_lock(&newsbsec->lock); + + newsbsec->flags = oldsbsec->flags; + + newsbsec->sid = oldsbsec->sid; + newsbsec->def_sid = oldsbsec->def_sid; + newsbsec->behavior = oldsbsec->behavior; + + if (set_context) { + u32 sid = oldsbsec->mntpoint_sid; + + if (!set_fscontext) + newsbsec->sid = sid; + if (!set_rootcontext) { + struct inode *newinode = newsb->s_root->d_inode; + struct inode_security_struct *newisec = newinode->i_security; + newisec->sid = sid; + } + newsbsec->mntpoint_sid = sid; } + if (set_rootcontext) { + const struct inode *oldinode = oldsb->s_root->d_inode; + const struct inode_security_struct *oldisec = oldinode->i_security; + struct inode *newinode = newsb->s_root->d_inode; + struct inode_security_struct *newisec = newinode->i_security; - /* Determine the labeling behavior to use for this filesystem type. */ - rc = security_fs_use(sb->s_type->name, &sbsec->behavior, &sbsec->sid); - if (rc) { - printk(KERN_WARNING "%s: security_fs_use(%s) returned %d\n", - __FUNCTION__, sb->s_type->name, rc); - goto out; + newisec->sid = oldisec->sid; } - rc = try_context_mount(sb, data); - if (rc) + sb_finish_set_opts(newsb); + mutex_unlock(&newsbsec->lock); +} + +/* + * string mount options parsing and call set the sbsec + */ +static int superblock_doinit(struct super_block *sb, void *data) +{ + char *context = NULL, *defcontext = NULL; + char *fscontext = NULL, *rootcontext = NULL; + int rc = 0; + char *p, *options = data; + /* selinux only know about a fixed number of mount options */ + char *mnt_opts[NUM_SEL_MNT_OPTS]; + int mnt_opts_flags[NUM_SEL_MNT_OPTS], num_mnt_opts = 0; + + if (!data) goto out; - if (sbsec->behavior == SECURITY_FS_USE_XATTR) { - /* Make sure that the xattr handler exists and that no - error other than -ENODATA is returned by getxattr on - the root directory. -ENODATA is ok, as this may be - the first boot of the SELinux kernel before we have - assigned xattr values to the filesystem. */ - if (!inode->i_op->getxattr) { - printk(KERN_WARNING "SELinux: (dev %s, type %s) has no " - "xattr support\n", sb->s_id, sb->s_type->name); - rc = -EOPNOTSUPP; - goto out; - } - rc = inode->i_op->getxattr(root, XATTR_NAME_SELINUX, NULL, 0); - if (rc < 0 && rc != -ENODATA) { - if (rc == -EOPNOTSUPP) - printk(KERN_WARNING "SELinux: (dev %s, type " - "%s) has no security xattr handler\n", - sb->s_id, sb->s_type->name); - else - printk(KERN_WARNING "SELinux: (dev %s, type " - "%s) getxattr errno %d\n", sb->s_id, - sb->s_type->name, -rc); + /* with the nfs patch this will become a goto out; */ + if (sb->s_type->fs_flags & FS_BINARY_MOUNTDATA) { + const char *name = sb->s_type->name; + /* NFS we understand. */ + if (!strcmp(name, "nfs")) { + struct nfs_mount_data *d = data; + + if (d->version != NFS_MOUNT_VERSION) + goto out; + + if (d->context[0]) { + context = kstrdup(d->context, GFP_KERNEL); + if (!context) { + rc = -ENOMEM; + goto out; + } + } + goto build_flags; + } else goto out; - } } - if (strcmp(sb->s_type->name, "proc") == 0) - sbsec->proc = 1; + /* Standard string-based options. */ + while ((p = strsep(&options, "|")) != NULL) { + int token; + substring_t args[MAX_OPT_ARGS]; - sbsec->initialized = 1; + if (!*p) + continue; - if (sbsec->behavior > ARRAY_SIZE(labeling_behaviors)) { - printk(KERN_ERR "SELinux: initialized (dev %s, type %s), unknown behavior\n", - sb->s_id, sb->s_type->name); - } - else { - printk(KERN_DEBUG "SELinux: initialized (dev %s, type %s), %s\n", - sb->s_id, sb->s_type->name, - labeling_behaviors[sbsec->behavior-1]); - } + token = match_token(p, tokens, args); - /* Initialize the root inode. */ - rc = inode_doinit_with_dentry(sb->s_root->d_inode, sb->s_root); + switch (token) { + case Opt_context: + if (context || defcontext) { + rc = -EINVAL; + printk(KERN_WARNING SEL_MOUNT_FAIL_MSG); + goto out_err; + } + context = match_strdup(&args[0]); + if (!context) { + rc = -ENOMEM; + goto out_err; + } + break; + + case Opt_fscontext: + if (fscontext) { + rc = -EINVAL; + printk(KERN_WARNING SEL_MOUNT_FAIL_MSG); + goto out_err; + } + fscontext = match_strdup(&args[0]); + if (!fscontext) { + rc = -ENOMEM; + goto out_err; + } + break; + + case Opt_rootcontext: + if (rootcontext) { + rc = -EINVAL; + printk(KERN_WARNING SEL_MOUNT_FAIL_MSG); + goto out_err; + } + rootcontext = match_strdup(&args[0]); + if (!rootcontext) { + rc = -ENOMEM; + goto out_err; + } + break; + + case Opt_defcontext: + if (context || defcontext) { + rc = -EINVAL; + printk(KERN_WARNING SEL_MOUNT_FAIL_MSG); + goto out_err; + } + defcontext = match_strdup(&args[0]); + if (!defcontext) { + rc = -ENOMEM; + goto out_err; + } + break; + + default: + rc = -EINVAL; + printk(KERN_WARNING "SELinux: unknown mount option\n"); + goto out_err; - /* Initialize any other inodes associated with the superblock, e.g. - inodes created prior to initial policy load or inodes created - during get_sb by a pseudo filesystem that directly - populates itself. */ - spin_lock(&sbsec->isec_lock); -next_inode: - if (!list_empty(&sbsec->isec_head)) { - struct inode_security_struct *isec = - list_entry(sbsec->isec_head.next, - struct inode_security_struct, list); - struct inode *inode = isec->inode; - spin_unlock(&sbsec->isec_lock); - inode = igrab(inode); - if (inode) { - if (!IS_PRIVATE (inode)) - inode_doinit(inode); - iput(inode); } - spin_lock(&sbsec->isec_lock); - list_del_init(&isec->list); - goto next_inode; } - spin_unlock(&sbsec->isec_lock); + +build_flags: + if (fscontext) { + mnt_opts[num_mnt_opts] = fscontext; + mnt_opts_flags[num_mnt_opts++] = FSCONTEXT_MNT; + } + if (context) { + mnt_opts[num_mnt_opts] = context; + mnt_opts_flags[num_mnt_opts++] = CONTEXT_MNT; + } + if (rootcontext) { + mnt_opts[num_mnt_opts] = rootcontext; + mnt_opts_flags[num_mnt_opts++] = ROOTCONTEXT_MNT; + } + if (defcontext) { + mnt_opts[num_mnt_opts] = defcontext; + mnt_opts_flags[num_mnt_opts++] = DEFCONTEXT_MNT; + } + out: - mutex_unlock(&sbsec->lock); + rc = selinux_set_mnt_opts(sb, mnt_opts, mnt_opts_flags, num_mnt_opts); +out_err: + kfree(context); + kfree(defcontext); + kfree(fscontext); + kfree(rootcontext); return rc; } @@ -4800,6 +5037,9 @@ static struct security_operations selinux_ops = { .sb_statfs = selinux_sb_statfs, .sb_mount = selinux_mount, .sb_umount = selinux_umount, + .sb_get_mnt_opts = selinux_get_mnt_opts, + .sb_set_mnt_opts = selinux_set_mnt_opts, + .sb_clone_mnt_opts = selinux_sb_clone_mnt_opts, .inode_alloc_security = selinux_inode_alloc_security, .inode_free_security = selinux_inode_free_security, diff --git a/security/selinux/include/objsec.h b/security/selinux/include/objsec.h index 642a9fd319ad..4138a80f8e27 100644 --- a/security/selinux/include/objsec.h +++ b/security/selinux/include/objsec.h @@ -65,6 +65,7 @@ struct superblock_security_struct { u32 mntpoint_sid; /* SECURITY_FS_USE_MNTPOINT context for files */ unsigned int behavior; /* labeling behavior */ unsigned char initialized; /* initialization flag */ + unsigned char flags; /* which mount options were specified */ unsigned char proc; /* proc fs */ struct mutex lock; struct list_head isec_head; -- cgit v1.2.3-59-g8ed1b From 88c3f7a8f2c86be264d326cf6f49a3e8c30d13a6 Mon Sep 17 00:00:00 2001 From: Richard Knutsson Date: Sat, 8 Dec 2007 12:02:48 +0100 Subject: Security: remove security_file_mmap hook sparse-warnings (NULL as 0). Fixing: CHECK mm/mmap.c mm/mmap.c:1623:29: warning: Using plain integer as NULL pointer mm/mmap.c:1623:29: warning: Using plain integer as NULL pointer mm/mmap.c:1944:29: warning: Using plain integer as NULL pointer Signed-off-by: Richard Knutsson Signed-off-by: James Morris --- mm/mmap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/mmap.c b/mm/mmap.c index 15678aa6ec73..bfa389fc6ded 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1620,7 +1620,7 @@ static inline int expand_downwards(struct vm_area_struct *vma, return -ENOMEM; address &= PAGE_MASK; - error = security_file_mmap(0, 0, 0, 0, address, 1); + error = security_file_mmap(NULL, 0, 0, 0, address, 1); if (error) return error; @@ -1941,7 +1941,7 @@ unsigned long do_brk(unsigned long addr, unsigned long len) if (is_hugepage_only_range(mm, addr, len)) return -EINVAL; - error = security_file_mmap(0, 0, 0, 0, addr, 1); + error = security_file_mmap(NULL, 0, 0, 0, addr, 1); if (error) return error; -- cgit v1.2.3-59-g8ed1b From 42d7896ebc5f7268b1fe6bbd20f2282e20ae7895 Mon Sep 17 00:00:00 2001 From: James Morris Date: Wed, 26 Dec 2007 15:12:37 +1100 Subject: Security: remove security.h include from mm.h Remove security.h include from mm.h, as it is only needed for a single extern declaration, and pulls in all kinds of crud. Fine-by-me: David Chinner Acked-by: Eric Paris Signed-off-by: James Morris --- include/linux/mm.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/linux/mm.h b/include/linux/mm.h index 1b7b95c67aca..1897ca223eca 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -12,7 +12,6 @@ #include #include #include -#include struct mempolicy; struct anon_vma; @@ -34,6 +33,8 @@ extern int sysctl_legacy_va_layout; #define sysctl_legacy_va_layout 0 #endif +extern unsigned long mmap_min_addr; + #include #include #include -- cgit v1.2.3-59-g8ed1b From bced95283e9434611cbad8f2ff903cd396eaea72 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Sat, 29 Dec 2007 16:20:25 -0800 Subject: security: remove security_sb_post_mountroot hook The security_sb_post_mountroot() hook is long-since obsolete, and is fundamentally broken: it is never invoked if someone uses initramfs. This is particularly damaging, because the existence of this hook has been used as motivation for not using initramfs. Stephen Smalley confirmed on 2007-07-19 that this hook was originally used by SELinux but can now be safely removed: http://marc.info/?l=linux-kernel&m=118485683612916&w=2 Cc: Stephen Smalley Cc: James Morris Cc: Eric Paris Cc: Chris Wright Signed-off-by: H. Peter Anvin Signed-off-by: James Morris --- include/linux/security.h | 8 -------- init/do_mounts.c | 1 - security/dummy.c | 6 ------ security/security.c | 5 ----- 4 files changed, 20 deletions(-) diff --git a/include/linux/security.h b/include/linux/security.h index cbd970a735f2..2e2c63faead7 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -249,9 +249,6 @@ struct request_sock; * @mnt contains the mounted file system. * @flags contains the new filesystem flags. * @data contains the filesystem-specific data. - * @sb_post_mountroot: - * Update the security module's state when the root filesystem is mounted. - * This hook is only called if the mount was successful. * @sb_post_addmount: * Update the security module's state when a filesystem is mounted. * This hook is called any time a mount is successfully grafetd to @@ -1257,7 +1254,6 @@ struct security_operations { void (*sb_umount_busy) (struct vfsmount * mnt); void (*sb_post_remount) (struct vfsmount * mnt, unsigned long flags, void *data); - void (*sb_post_mountroot) (void); void (*sb_post_addmount) (struct vfsmount * mnt, struct nameidata * mountpoint_nd); int (*sb_pivotroot) (struct nameidata * old_nd, @@ -1524,7 +1520,6 @@ int security_sb_umount(struct vfsmount *mnt, int flags); void security_sb_umount_close(struct vfsmount *mnt); void security_sb_umount_busy(struct vfsmount *mnt); void security_sb_post_remount(struct vfsmount *mnt, unsigned long flags, void *data); -void security_sb_post_mountroot(void); void security_sb_post_addmount(struct vfsmount *mnt, struct nameidata *mountpoint_nd); int security_sb_pivotroot(struct nameidata *old_nd, struct nameidata *new_nd); void security_sb_post_pivotroot(struct nameidata *old_nd, struct nameidata *new_nd); @@ -1813,9 +1808,6 @@ static inline void security_sb_post_remount (struct vfsmount *mnt, unsigned long flags, void *data) { } -static inline void security_sb_post_mountroot (void) -{ } - static inline void security_sb_post_addmount (struct vfsmount *mnt, struct nameidata *mountpoint_nd) { } diff --git a/init/do_mounts.c b/init/do_mounts.c index 4efa1e5385e3..31b2185ce304 100644 --- a/init/do_mounts.c +++ b/init/do_mounts.c @@ -470,6 +470,5 @@ void __init prepare_namespace(void) out: sys_mount(".", "/", NULL, MS_MOVE, NULL); sys_chroot("."); - security_sb_post_mountroot(); } diff --git a/security/dummy.c b/security/dummy.c index a3b29d0d00e5..8e34e03415f8 100644 --- a/security/dummy.c +++ b/security/dummy.c @@ -225,11 +225,6 @@ static void dummy_sb_post_remount (struct vfsmount *mnt, unsigned long flags, } -static void dummy_sb_post_mountroot (void) -{ - return; -} - static void dummy_sb_post_addmount (struct vfsmount *mnt, struct nameidata *nd) { return; @@ -1017,7 +1012,6 @@ void security_fixup_ops (struct security_operations *ops) set_to_dummy_if_null(ops, sb_umount_close); set_to_dummy_if_null(ops, sb_umount_busy); set_to_dummy_if_null(ops, sb_post_remount); - set_to_dummy_if_null(ops, sb_post_mountroot); set_to_dummy_if_null(ops, sb_post_addmount); set_to_dummy_if_null(ops, sb_pivotroot); set_to_dummy_if_null(ops, sb_post_pivotroot); diff --git a/security/security.c b/security/security.c index b13b54f0af85..5068808343d0 100644 --- a/security/security.c +++ b/security/security.c @@ -288,11 +288,6 @@ void security_sb_post_remount(struct vfsmount *mnt, unsigned long flags, void *d security_ops->sb_post_remount(mnt, flags, data); } -void security_sb_post_mountroot(void) -{ - security_ops->sb_post_mountroot(); -} - void security_sb_post_addmount(struct vfsmount *mnt, struct nameidata *mountpoint_nd) { security_ops->sb_post_addmount(mnt, mountpoint_nd); -- cgit v1.2.3-59-g8ed1b From c43e259cc756ece387faae849af0058b56d78466 Mon Sep 17 00:00:00 2001 From: James Morris Date: Sat, 12 Jan 2008 22:05:48 +1100 Subject: security: call security_file_permission from rw_verify_area All instances of rw_verify_area() are followed by a call to security_file_permission(), so just call the latter from the former. Acked-by: Eric Paris Signed-off-by: James Morris --- fs/compat.c | 4 ---- fs/read_write.c | 63 ++++++++++++++++++++++----------------------------------- fs/splice.c | 8 -------- 3 files changed, 24 insertions(+), 51 deletions(-) diff --git a/fs/compat.c b/fs/compat.c index 15078ce4c04a..5216c3fd7517 100644 --- a/fs/compat.c +++ b/fs/compat.c @@ -1104,10 +1104,6 @@ static ssize_t compat_do_readv_writev(int type, struct file *file, if (ret < 0) goto out; - ret = security_file_permission(file, type == READ ? MAY_READ:MAY_WRITE); - if (ret) - goto out; - fnv = NULL; if (type == READ) { fn = file->f_op->read; diff --git a/fs/read_write.c b/fs/read_write.c index ea1f94cc722e..c4d3d17923f1 100644 --- a/fs/read_write.c +++ b/fs/read_write.c @@ -197,25 +197,27 @@ int rw_verify_area(int read_write, struct file *file, loff_t *ppos, size_t count { struct inode *inode; loff_t pos; + int retval = -EINVAL; inode = file->f_path.dentry->d_inode; if (unlikely((ssize_t) count < 0)) - goto Einval; + return retval; pos = *ppos; if (unlikely((pos < 0) || (loff_t) (pos + count) < 0)) - goto Einval; + return retval; if (unlikely(inode->i_flock && mandatory_lock(inode))) { - int retval = locks_mandatory_area( + retval = locks_mandatory_area( read_write == READ ? FLOCK_VERIFY_READ : FLOCK_VERIFY_WRITE, inode, file, pos, count); if (retval < 0) return retval; } + retval = security_file_permission(file, + read_write == READ ? MAY_READ : MAY_WRITE); + if (retval) + return retval; return count > MAX_RW_COUNT ? MAX_RW_COUNT : count; - -Einval: - return -EINVAL; } static void wait_on_retry_sync_kiocb(struct kiocb *iocb) @@ -267,18 +269,15 @@ ssize_t vfs_read(struct file *file, char __user *buf, size_t count, loff_t *pos) ret = rw_verify_area(READ, file, pos, count); if (ret >= 0) { count = ret; - ret = security_file_permission (file, MAY_READ); - if (!ret) { - if (file->f_op->read) - ret = file->f_op->read(file, buf, count, pos); - else - ret = do_sync_read(file, buf, count, pos); - if (ret > 0) { - fsnotify_access(file->f_path.dentry); - add_rchar(current, ret); - } - inc_syscr(current); + if (file->f_op->read) + ret = file->f_op->read(file, buf, count, pos); + else + ret = do_sync_read(file, buf, count, pos); + if (ret > 0) { + fsnotify_access(file->f_path.dentry); + add_rchar(current, ret); } + inc_syscr(current); } return ret; @@ -325,18 +324,15 @@ ssize_t vfs_write(struct file *file, const char __user *buf, size_t count, loff_ ret = rw_verify_area(WRITE, file, pos, count); if (ret >= 0) { count = ret; - ret = security_file_permission (file, MAY_WRITE); - if (!ret) { - if (file->f_op->write) - ret = file->f_op->write(file, buf, count, pos); - else - ret = do_sync_write(file, buf, count, pos); - if (ret > 0) { - fsnotify_modify(file->f_path.dentry); - add_wchar(current, ret); - } - inc_syscw(current); + if (file->f_op->write) + ret = file->f_op->write(file, buf, count, pos); + else + ret = do_sync_write(file, buf, count, pos); + if (ret > 0) { + fsnotify_modify(file->f_path.dentry); + add_wchar(current, ret); } + inc_syscw(current); } return ret; @@ -603,9 +599,6 @@ static ssize_t do_readv_writev(int type, struct file *file, ret = rw_verify_area(type, file, pos, tot_len); if (ret < 0) goto out; - ret = security_file_permission(file, type == READ ? MAY_READ : MAY_WRITE); - if (ret) - goto out; fnv = NULL; if (type == READ) { @@ -737,10 +730,6 @@ static ssize_t do_sendfile(int out_fd, int in_fd, loff_t *ppos, goto fput_in; count = retval; - retval = security_file_permission (in_file, MAY_READ); - if (retval) - goto fput_in; - /* * Get output file, and verify that it is ok.. */ @@ -759,10 +748,6 @@ static ssize_t do_sendfile(int out_fd, int in_fd, loff_t *ppos, goto fput_out; count = retval; - retval = security_file_permission (out_file, MAY_WRITE); - if (retval) - goto fput_out; - if (!max) max = min(in_inode->i_sb->s_maxbytes, out_inode->i_sb->s_maxbytes); diff --git a/fs/splice.c b/fs/splice.c index 6bdcb6107bc3..56b802bfbfa4 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -908,10 +908,6 @@ static long do_splice_from(struct pipe_inode_info *pipe, struct file *out, if (unlikely(ret < 0)) return ret; - ret = security_file_permission(out, MAY_WRITE); - if (unlikely(ret < 0)) - return ret; - return out->f_op->splice_write(pipe, out, ppos, len, flags); } @@ -934,10 +930,6 @@ static long do_splice_to(struct file *in, loff_t *ppos, if (unlikely(ret < 0)) return ret; - ret = security_file_permission(in, MAY_READ); - if (unlikely(ret < 0)) - return ret; - return in->f_op->splice_read(in, ppos, pipe, len, flags); } -- cgit v1.2.3-59-g8ed1b From 63cb34492351078479b2d4bae6a881806a396286 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 15 Jan 2008 23:47:35 +0000 Subject: security: add a secctx_to_secid() hook Add a secctx_to_secid() LSM hook to go along with the existing secid_to_secctx() LSM hook. This patch also includes the SELinux implementation for this hook. Signed-off-by: Paul Moore Acked-by: Stephen Smalley Signed-off-by: James Morris --- include/linux/security.h | 13 +++++++++++++ security/dummy.c | 6 ++++++ security/security.c | 6 ++++++ security/selinux/hooks.c | 6 ++++++ 4 files changed, 31 insertions(+) diff --git a/include/linux/security.h b/include/linux/security.h index 2e2c63faead7..e4a91cb1b187 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -1202,6 +1202,10 @@ struct request_sock; * Convert secid to security context. * @secid contains the security ID. * @secdata contains the pointer that stores the converted security context. + * @secctx_to_secid: + * Convert security context to secid. + * @secid contains the pointer to the generated security ID. + * @secdata contains the security context. * * @release_secctx: * Release the security context. @@ -1396,6 +1400,7 @@ struct security_operations { int (*getprocattr)(struct task_struct *p, char *name, char **value); int (*setprocattr)(struct task_struct *p, char *name, void *value, size_t size); int (*secid_to_secctx)(u32 secid, char **secdata, u32 *seclen); + int (*secctx_to_secid)(char *secdata, u32 seclen, u32 *secid); void (*release_secctx)(char *secdata, u32 seclen); #ifdef CONFIG_SECURITY_NETWORK @@ -1634,6 +1639,7 @@ int security_setprocattr(struct task_struct *p, char *name, void *value, size_t int security_netlink_send(struct sock *sk, struct sk_buff *skb); int security_netlink_recv(struct sk_buff *skb, int cap); int security_secid_to_secctx(u32 secid, char **secdata, u32 *seclen); +int security_secctx_to_secid(char *secdata, u32 seclen, u32 *secid); void security_release_secctx(char *secdata, u32 seclen); #else /* CONFIG_SECURITY */ @@ -2308,6 +2314,13 @@ static inline int security_secid_to_secctx(u32 secid, char **secdata, u32 *secle return -EOPNOTSUPP; } +static inline int security_secctx_to_secid(char *secdata, + u32 seclen, + u32 *secid) +{ + return -EOPNOTSUPP; +} + static inline void security_release_secctx(char *secdata, u32 seclen) { } diff --git a/security/dummy.c b/security/dummy.c index 8e34e03415f8..48d4b0a52737 100644 --- a/security/dummy.c +++ b/security/dummy.c @@ -946,6 +946,11 @@ static int dummy_secid_to_secctx(u32 secid, char **secdata, u32 *seclen) return -EOPNOTSUPP; } +static int dummy_secctx_to_secid(char *secdata, u32 seclen, u32 *secid) +{ + return -EOPNOTSUPP; +} + static void dummy_release_secctx(char *secdata, u32 seclen) { } @@ -1106,6 +1111,7 @@ void security_fixup_ops (struct security_operations *ops) set_to_dummy_if_null(ops, getprocattr); set_to_dummy_if_null(ops, setprocattr); set_to_dummy_if_null(ops, secid_to_secctx); + set_to_dummy_if_null(ops, secctx_to_secid); set_to_dummy_if_null(ops, release_secctx); #ifdef CONFIG_SECURITY_NETWORK set_to_dummy_if_null(ops, unix_stream_connect); diff --git a/security/security.c b/security/security.c index 5068808343d0..ca475ca206e4 100644 --- a/security/security.c +++ b/security/security.c @@ -831,6 +831,12 @@ int security_secid_to_secctx(u32 secid, char **secdata, u32 *seclen) } EXPORT_SYMBOL(security_secid_to_secctx); +int security_secctx_to_secid(char *secdata, u32 seclen, u32 *secid) +{ + return security_ops->secctx_to_secid(secdata, seclen, secid); +} +EXPORT_SYMBOL(security_secctx_to_secid); + void security_release_secctx(char *secdata, u32 seclen) { return security_ops->release_secctx(secdata, seclen); diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 233c8b97462f..0396354fff95 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -4947,6 +4947,11 @@ static int selinux_secid_to_secctx(u32 secid, char **secdata, u32 *seclen) return security_sid_to_context(secid, secdata, seclen); } +static int selinux_secctx_to_secid(char *secdata, u32 seclen, u32 *secid) +{ + return security_context_to_sid(secdata, seclen, secid); +} + static void selinux_release_secctx(char *secdata, u32 seclen) { kfree(secdata); @@ -5138,6 +5143,7 @@ static struct security_operations selinux_ops = { .setprocattr = selinux_setprocattr, .secid_to_secctx = selinux_secid_to_secctx, + .secctx_to_secid = selinux_secctx_to_secid, .release_secctx = selinux_release_secctx, .unix_stream_connect = selinux_socket_unix_stream_connect, -- cgit v1.2.3-59-g8ed1b From 1996a10948e50e546dc2b64276723c0b64d3173b Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Wed, 23 Jan 2008 00:02:58 +0100 Subject: security/selinux: constify function pointer tables and fields Constify function pointer tables and fields. Signed-off-by: Jan Engelhardt Signed-off-by: James Morris --- include/linux/security.h | 2 +- security/keys/proc.c | 4 ++-- security/selinux/selinuxfs.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/include/linux/security.h b/include/linux/security.h index e4a91cb1b187..d24974262dc6 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -2300,7 +2300,7 @@ static inline struct dentry *securityfs_create_file(const char *name, mode_t mode, struct dentry *parent, void *data, - struct file_operations *fops) + const struct file_operations *fops) { return ERR_PTR(-ENODEV); } diff --git a/security/keys/proc.c b/security/keys/proc.c index 3e0d0a6e224f..694126003ed3 100644 --- a/security/keys/proc.c +++ b/security/keys/proc.c @@ -26,7 +26,7 @@ static void *proc_keys_next(struct seq_file *p, void *v, loff_t *_pos); static void proc_keys_stop(struct seq_file *p, void *v); static int proc_keys_show(struct seq_file *m, void *v); -static struct seq_operations proc_keys_ops = { +static const struct seq_operations proc_keys_ops = { .start = proc_keys_start, .next = proc_keys_next, .stop = proc_keys_stop, @@ -47,7 +47,7 @@ static void *proc_key_users_next(struct seq_file *p, void *v, loff_t *_pos); static void proc_key_users_stop(struct seq_file *p, void *v); static int proc_key_users_show(struct seq_file *m, void *v); -static struct seq_operations proc_key_users_ops = { +static const struct seq_operations proc_key_users_ops = { .start = proc_key_users_start, .next = proc_key_users_next, .stop = proc_key_users_stop, diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c index 2fa483f26113..397fd4955fe1 100644 --- a/security/selinux/selinuxfs.c +++ b/security/selinux/selinuxfs.c @@ -1222,7 +1222,7 @@ static int sel_avc_stats_seq_show(struct seq_file *seq, void *v) static void sel_avc_stats_seq_stop(struct seq_file *seq, void *v) { } -static struct seq_operations sel_avc_cache_stats_seq_ops = { +static const struct seq_operations sel_avc_cache_stats_seq_ops = { .start = sel_avc_stats_seq_start, .next = sel_avc_stats_seq_next, .show = sel_avc_stats_seq_show, -- cgit v1.2.3-59-g8ed1b From 2e08c0c1c3977a5ddc88887dd3af1b26c433e9d0 Mon Sep 17 00:00:00 2001 From: Eamon Walsh Date: Thu, 24 Jan 2008 15:30:52 -0500 Subject: selinux: make mls_compute_sid always polyinstantiate This patch removes the requirement that the new and related object types differ in order to polyinstantiate by MLS level. This allows MLS polyinstantiation to occur in the absence of explicit type_member rules or when the type has not changed. Potential users of this support include pam_namespace.so (directory polyinstantiation) and the SELinux X support (property polyinstantiation). Signed-off-by: Eamon Walsh Acked-by: Stephen Smalley Signed-off-by: James Morris --- security/selinux/ss/mls.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/security/selinux/ss/mls.c b/security/selinux/ss/mls.c index fb5d70a6628d..3bbcb5369af9 100644 --- a/security/selinux/ss/mls.c +++ b/security/selinux/ss/mls.c @@ -537,15 +537,8 @@ int mls_compute_sid(struct context *scontext, /* Use the process effective MLS attributes. */ return mls_context_cpy_low(newcontext, scontext); case AVTAB_MEMBER: - /* Only polyinstantiate the MLS attributes if - the type is being polyinstantiated */ - if (newcontext->type != tcontext->type) { - /* Use the process effective MLS attributes. */ - return mls_context_cpy_low(newcontext, scontext); - } else { - /* Use the related object MLS attributes. */ - return mls_context_cpy(newcontext, tcontext); - } + /* Use the process effective MLS attributes. */ + return mls_context_cpy_low(newcontext, scontext); default: return -EINVAL; } -- cgit v1.2.3-59-g8ed1b From 6d5ae0deb1641bf615eafd8fef64218e10cb2fd0 Mon Sep 17 00:00:00 2001 From: Igor Mammedov Date: Fri, 25 Jan 2008 03:28:31 +0000 Subject: [CIFS] DFS support: provide shrinkable mounts Signed-off-by: Igor Mammedov Signed-off-by: Steve French --- fs/cifs/Makefile | 2 +- fs/cifs/cifs_dfs_ref.c | 375 +++++++++++++++++++++++++++++++++++++++++++++++++ fs/cifs/cifsfs.c | 4 + fs/cifs/cifsfs.h | 4 + fs/cifs/cifsproto.h | 3 + 5 files changed, 387 insertions(+), 1 deletion(-) create mode 100644 fs/cifs/cifs_dfs_ref.c diff --git a/fs/cifs/Makefile b/fs/cifs/Makefile index 09898b8dc69b..6ba43fb346fb 100644 --- a/fs/cifs/Makefile +++ b/fs/cifs/Makefile @@ -10,4 +10,4 @@ cifs-y := cifsfs.o cifssmb.o cifs_debug.o connect.o dir.o file.o inode.o \ cifs-$(CONFIG_CIFS_UPCALL) += cifs_spnego.o -cifs-$(CONFIG_CIFS_DFS_UPCALL) += dns_resolve.o +cifs-$(CONFIG_CIFS_DFS_UPCALL) += dns_resolve.o cifs_dfs_ref.o diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c new file mode 100644 index 000000000000..15e31f8435ba --- /dev/null +++ b/fs/cifs/cifs_dfs_ref.c @@ -0,0 +1,375 @@ +/* + * Contains the CIFS DFS referral mounting routines used for handling + * traversal via DFS junction point + * + * Copyright (c) 2007 Igor Mammedov + * Author(s): Igor Mammedov (niallain@gmail.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include "cifsglob.h" +#include "cifsproto.h" +#include "cifsfs.h" +#include "dns_resolve.h" +#include "cifs_debug.h" + +LIST_HEAD(cifs_dfs_automount_list); + +/* + * DFS functions +*/ + +void dfs_shrink_umount_helper(struct vfsmount *vfsmnt) +{ + mark_mounts_for_expiry(&cifs_dfs_automount_list); + mark_mounts_for_expiry(&cifs_dfs_automount_list); + shrink_submounts(vfsmnt, &cifs_dfs_automount_list); +} + +/** + * cifs_get_share_name - extracts share name from UNC + * @node_name: pointer to UNC string + * + * Extracts sharename form full UNC. + * i.e. strips from UNC trailing path that is not part of share + * name and fixup missing '\' in the begining of DFS node refferal + * if neccessary. + * Returns pointer to share name on success or NULL on error. + * Caller is responsible for freeing returned string. + */ +static char *cifs_get_share_name(const char *node_name) +{ + int len; + char *UNC; + char *pSep; + + len = strlen(node_name); + UNC = kmalloc(len+2 /*for term null and additional \ if it's missed */, + GFP_KERNEL); + if (!UNC) + return NULL; + + /* get share name and server name */ + if (node_name[1] != '\\') { + UNC[0] = '\\'; + strncpy(UNC+1, node_name, len); + len++; + UNC[len] = 0; + } else { + strncpy(UNC, node_name, len); + UNC[len] = 0; + } + + /* find server name end */ + pSep = memchr(UNC+2, '\\', len-2); + if (!pSep) { + cERROR(1, ("%s: no server name end in node name: %s", + __FUNCTION__, node_name)); + kfree(UNC); + return NULL; + } + + /* find sharename end */ + pSep++; + pSep = memchr(UNC+(pSep-UNC), '\\', len-(pSep-UNC)); + if (!pSep) { + cERROR(1, ("%s:2 cant find share name in node name: %s", + __FUNCTION__, node_name)); + kfree(UNC); + return NULL; + } + /* trim path up to sharename end + * * now we have share name in UNC */ + *pSep = 0; + + return UNC; +} + + +/** + * compose_mount_options - creates mount options for refferral + * @sb_mountdata: parent/root DFS mount options (template) + * @ref_unc: refferral server UNC + * @devname: pointer for saving device name + * + * creates mount options for submount based on template options sb_mountdata + * and replacing unc,ip,prefixpath options with ones we've got form ref_unc. + * + * Returns: pointer to new mount options or ERR_PTR. + * Caller is responcible for freeing retunrned value if it is not error. + */ +char *compose_mount_options(const char *sb_mountdata, const char *ref_unc, + char **devname) +{ + int rc; + char *mountdata; + int md_len; + char *tkn_e; + char *srvIP = NULL; + char sep = ','; + int off, noff; + + if (sb_mountdata == NULL) + return ERR_PTR(-EINVAL); + + *devname = cifs_get_share_name(ref_unc); + rc = dns_resolve_server_name_to_ip(*devname, &srvIP); + if (rc != 0) { + cERROR(1, ("%s: Failed to resolve server part of %s to IP", + __FUNCTION__, *devname)); + mountdata = ERR_PTR(rc); + goto compose_mount_options_out; + } + md_len = strlen(sb_mountdata) + strlen(srvIP) + strlen(ref_unc) + 3; + mountdata = kzalloc(md_len+1, GFP_KERNEL); + if (mountdata == NULL) { + mountdata = ERR_PTR(-ENOMEM); + goto compose_mount_options_out; + } + + /* copy all options except of unc,ip,prefixpath */ + off = 0; + if (strncmp(sb_mountdata, "sep=", 4) == 0) { + sep = sb_mountdata[4]; + strncpy(mountdata, sb_mountdata, 5); + off += 5; + } + while ((tkn_e = strchr(sb_mountdata+off, sep))) { + noff = (tkn_e - (sb_mountdata+off)) + 1; + if (strnicmp(sb_mountdata+off, "unc=", 4) == 0) { + off += noff; + continue; + } + if (strnicmp(sb_mountdata+off, "ip=", 3) == 0) { + off += noff; + continue; + } + if (strnicmp(sb_mountdata+off, "prefixpath=", 3) == 0) { + off += noff; + continue; + } + strncat(mountdata, sb_mountdata+off, noff); + off += noff; + } + strcat(mountdata, sb_mountdata+off); + mountdata[md_len] = '\0'; + + /* copy new IP and ref share name */ + strcat(mountdata, ",ip="); + strcat(mountdata, srvIP); + strcat(mountdata, ",unc="); + strcat(mountdata, *devname); + + /* find & copy prefixpath */ + tkn_e = strchr(ref_unc+2, '\\'); + if (tkn_e) { + tkn_e = strchr(tkn_e+1, '\\'); + if (tkn_e) { + strcat(mountdata, ",prefixpath="); + strcat(mountdata, tkn_e); + } + } + + /*cFYI(1,("%s: parent mountdata: %s", __FUNCTION__,sb_mountdata));*/ + /*cFYI(1, ("%s: submount mountdata: %s", __FUNCTION__, mountdata ));*/ + +compose_mount_options_out: + kfree(srvIP); + return mountdata; +} + + +struct vfsmount *cifs_dfs_do_refmount(const struct vfsmount *mnt_parent, + struct dentry *dentry, char *ref_unc) +{ + struct cifs_sb_info *cifs_sb; + struct vfsmount *mnt; + char *mountdata; + char *devname; + + cifs_sb = CIFS_SB(dentry->d_inode->i_sb); + mountdata = compose_mount_options(cifs_sb->mountdata, + ref_unc, &devname); + + if (IS_ERR(mountdata)) + return (struct vfsmount *)mountdata; + + mnt = vfs_kern_mount(&cifs_fs_type, 0, devname, mountdata); + kfree(mountdata); + kfree(devname); + return mnt; + +} + +static char *build_full_dfs_path_from_dentry(struct dentry *dentry) +{ + char *full_path = NULL; + char *search_path; + char *tmp_path; + size_t l_max_len; + struct cifs_sb_info *cifs_sb; + + if (dentry->d_inode == NULL) + return NULL; + + cifs_sb = CIFS_SB(dentry->d_inode->i_sb); + + if (cifs_sb->tcon == NULL) + return NULL; + + search_path = build_path_from_dentry(dentry); + if (search_path == NULL) + return NULL; + + if (cifs_sb->tcon->Flags & SMB_SHARE_IS_IN_DFS) { + /* we should use full path name to correct working with DFS */ + l_max_len = strnlen(cifs_sb->tcon->treeName, MAX_TREE_SIZE+1) + + strnlen(search_path, MAX_PATHCONF) + 1; + tmp_path = kmalloc(l_max_len, GFP_KERNEL); + if (tmp_path == NULL) { + kfree(search_path); + return NULL; + } + strncpy(tmp_path, cifs_sb->tcon->treeName, l_max_len); + strcat(tmp_path, search_path); + tmp_path[l_max_len-1] = 0; + full_path = tmp_path; + kfree(search_path); + } else { + full_path = search_path; + } + return full_path; +} + +static int add_mount_helper(struct vfsmount *newmnt, struct nameidata *nd, + struct list_head *mntlist) +{ + /* stolen from afs code */ + int err; + + mntget(newmnt); + err = do_add_mount(newmnt, nd, nd->mnt->mnt_flags, mntlist); + switch (err) { + case 0: + dput(nd->dentry); + mntput(nd->mnt); + nd->mnt = newmnt; + nd->dentry = dget(newmnt->mnt_root); + break; + case -EBUSY: + /* someone else made a mount here whilst we were busy */ + while (d_mountpoint(nd->dentry) && + follow_down(&nd->mnt, &nd->dentry)) + ; + err = 0; + default: + mntput(newmnt); + break; + } + return err; +} + +void dump_referral(const struct dfs_info3_param *ref) +{ + cFYI(1, ("DFS: ref path: %s", ref->path_name)); + cFYI(1, ("DFS: node path: %s", ref->node_name)); + cFYI(1, ("DFS: fl: %hd, srv_type: %hd", ref->flags, ref->server_type)); + cFYI(1, ("DFS: ref_flags: %hd, path_consumed: %hd", ref->ref_flag, + ref->PathConsumed)); +} + + +static void* +cifs_dfs_follow_mountpoint(struct dentry *dentry, struct nameidata *nd) +{ + struct dfs_info3_param *referrals = NULL; + unsigned int num_referrals = 0; + struct cifs_sb_info *cifs_sb; + struct cifsSesInfo *ses; + char *full_path = NULL; + int xid, i; + int rc = 0; + struct vfsmount *mnt = ERR_PTR(-ENOENT); + + cFYI(1, ("in %s", __FUNCTION__)); + BUG_ON(IS_ROOT(dentry)); + + xid = GetXid(); + + dput(nd->dentry); + nd->dentry = dget(dentry); + + cifs_sb = CIFS_SB(dentry->d_inode->i_sb); + ses = cifs_sb->tcon->ses; + + if (!ses) { + rc = -EINVAL; + goto out_err; + } + + full_path = build_full_dfs_path_from_dentry(dentry); + if (full_path == NULL) { + rc = -ENOMEM; + goto out_err; + } + + rc = get_dfs_path(xid, ses , full_path, cifs_sb->local_nls, + &num_referrals, &referrals, + cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); + + for (i = 0; i < num_referrals; i++) { + dump_referral(referrals+i); + /* connect to a storage node */ + if (referrals[i].flags & DFSREF_STORAGE_SERVER) { + int len; + len = strlen(referrals[i].node_name); + if (len < 2) { + cERROR(1, ("%s: Net Address path too short: %s", + __FUNCTION__, referrals[i].node_name)); + rc = -EINVAL; + goto out_err; + } + mnt = cifs_dfs_do_refmount(nd->mnt, nd->dentry, + referrals[i].node_name); + cFYI(1, ("%s: cifs_dfs_do_refmount:%s , mnt:%p", + __FUNCTION__, + referrals[i].node_name, mnt)); + + /* complete mount procedure if we accured submount */ + if (!IS_ERR(mnt)) + break; + } + } + + /* we need it cause for() above could exit without valid submount */ + rc = PTR_ERR(mnt); + if (IS_ERR(mnt)) + goto out_err; + + nd->mnt->mnt_flags |= MNT_SHRINKABLE; + rc = add_mount_helper(mnt, nd, &cifs_dfs_automount_list); + +out: + FreeXid(xid); + free_dfs_info_array(referrals, num_referrals); + kfree(full_path); + cFYI(1, ("leaving %s" , __FUNCTION__)); + return ERR_PTR(rc); +out_err: + path_release(nd); + goto out; +} + +struct inode_operations cifs_dfs_referral_inode_operations = { + .follow_link = cifs_dfs_follow_mountpoint, +}; + diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 93e107883a61..e9f4ec701092 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -471,6 +471,10 @@ static void cifs_umount_begin(struct vfsmount *vfsmnt, int flags) struct cifs_sb_info *cifs_sb; struct cifsTconInfo *tcon; +#ifdef CONFIG_CIFS_DFS_UPCALL + dfs_shrink_umount_helper(vfsmnt); +#endif /* CONFIG CIFS_DFS_UPCALL */ + if (!(flags & MNT_FORCE)) return; cifs_sb = CIFS_SB(vfsmnt->mnt_sb); diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h index 2e68126d07eb..195b14de5567 100644 --- a/fs/cifs/cifsfs.h +++ b/fs/cifs/cifsfs.h @@ -61,6 +61,10 @@ extern int cifs_setattr(struct dentry *, struct iattr *); extern const struct inode_operations cifs_file_inode_ops; extern const struct inode_operations cifs_symlink_inode_ops; +extern struct list_head cifs_dfs_automount_list; +extern struct inode_operations cifs_dfs_referral_inode_operations; + + /* Functions related to files and directories */ extern const struct file_operations cifs_file_ops; diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 7093cb4b0212..aaaf748f6a26 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -102,6 +102,9 @@ extern int mode_to_acl(struct inode *inode, const char *path, __u64); extern int cifs_mount(struct super_block *, struct cifs_sb_info *, char *, const char *); extern int cifs_umount(struct super_block *, struct cifs_sb_info *); +#ifdef CONFIG_CIFS_DFS_UPCALL +extern void dfs_shrink_umount_helper(struct vfsmount *vfsmnt); +#endif void cifs_proc_init(void); void cifs_proc_clean(void); -- cgit v1.2.3-59-g8ed1b From 6b2cb91efce215c3c34b1b79b15f30e860761a3e Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 25 Jul 2007 02:03:06 +0800 Subject: Chinese: Add the known_regression URI to the HOWTO Update translation for commit be3884943674f8ee7656b1d8b71c087ec900c836. Signed-off-by: Li Yang Signed-off-by: Greg Kroah-Hartman --- Documentation/zh_CN/HOWTO | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/zh_CN/HOWTO b/Documentation/zh_CN/HOWTO index 48fc67bfbe3d..c8660da7344e 100644 --- a/Documentation/zh_CN/HOWTO +++ b/Documentation/zh_CN/HOWTO @@ -218,6 +218,8 @@ kernel.org网站的pub/linux/kernel/v2.6/目录下找到它。它的开发遵循 时,一个新的-rc版本就会被发布。计划是每周都发布新的-rc版本。 - 这个过程一直持续下去直到内核被认为达到足够稳定的状态,持续时间大概是 6个星期。 + - 以下地址跟踪了在每个-rc发布中发现的退步列表: + http://kernelnewbies.org/known_regressions 关于内核发布,值得一提的是Andrew Morton在linux-kernel邮件列表中如是说: “没有人知道新内核何时会被发布,因为发布是根据已知bug的情况来决定 -- cgit v1.2.3-59-g8ed1b From 24277db3894941026662743e400e77c68c4a9e92 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 25 Jul 2007 02:43:32 +0800 Subject: Chinese: rephrase English introduction in HOWTO Rephrase the introduction as suggested by Jesper Juhl. Signed-off-by: Li Yang Signed-off-by: Greg Kroah-Hartman --- Documentation/zh_CN/HOWTO | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/zh_CN/HOWTO b/Documentation/zh_CN/HOWTO index c8660da7344e..79d1c3c7071d 100644 --- a/Documentation/zh_CN/HOWTO +++ b/Documentation/zh_CN/HOWTO @@ -1,10 +1,10 @@ Chinese translated version of Documentation/HOWTO If you have any comment or update to the content, please contact the -original document maintainer directly. However, if you have problem +original document maintainer directly. However, if you have a problem communicating in English you can also ask the Chinese maintainer for -help. Contact the Chinese maintainer, if this translation is outdated -or there is problem with translation. +help. Contact the Chinese maintainer if this translation is outdated +or if there is a problem with the translation. Maintainer: Greg Kroah-Hartman Chinese maintainer: Li Yang -- cgit v1.2.3-59-g8ed1b From 5dae82cc186da487cf33d7f5648a9ab3e02eaee4 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Tue, 23 Oct 2007 21:58:51 +0800 Subject: Chinese: Change man-pages maintainer address in HOWOTO The email address of the man-pages maintainer has changed. Cc: Michael Kerrisk Signed-off-by: Li Yang Signed-off-by: Greg Kroah-Hartman --- Documentation/zh_CN/HOWTO | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/zh_CN/HOWTO b/Documentation/zh_CN/HOWTO index 79d1c3c7071d..3d80e8af36ec 100644 --- a/Documentation/zh_CN/HOWTO +++ b/Documentation/zh_CN/HOWTO @@ -85,7 +85,7 @@ Linux内核源代码都是在GPL(通用公共许可证)的保护下发布的 Linux内核代码中包含有大量的文档。这些文档对于学习如何与内核社区互动有着 不可估量的价值。当一个新的功能被加入内核,最好把解释如何使用这个功能的文 档也放进内核。当内核的改动导致面向用户空间的接口发生变化时,最好将相关信 -息或手册页(manpages)的补丁发到mtk-manpages@gmx.net,以向手册页(manpages) +息或手册页(manpages)的补丁发到mtk.manpages@gmail.com,以向手册页(manpages) 的维护者解释这些变化。 以下是内核代码中需要阅读的文档: -- cgit v1.2.3-59-g8ed1b From 12428e7626378dec7968cd4f5df9aab2ee58e735 Mon Sep 17 00:00:00 2001 From: TripleX Chung Date: Wed, 24 Oct 2007 00:46:43 +0800 Subject: Chinese: add translation of SubmittingPatches Signed-off-by: TripleX Chung Signed-off-by: Li Yang Signed-off-by: Greg Kroah-Hartman --- Documentation/zh_CN/SubmittingPatches | 416 ++++++++++++++++++++++++++++++++++ 1 file changed, 416 insertions(+) create mode 100644 Documentation/zh_CN/SubmittingPatches diff --git a/Documentation/zh_CN/SubmittingPatches b/Documentation/zh_CN/SubmittingPatches new file mode 100644 index 000000000000..985c92e20b73 --- /dev/null +++ b/Documentation/zh_CN/SubmittingPatches @@ -0,0 +1,416 @@ +Chinese translated version of Documentation/SubmittingPatches + +If you have any comment or update to the content, please contact the +original document maintainer directly. However, if you have a problem +communicating in English you can also ask the Chinese maintainer for +help. Contact the Chinese maintainer if this translation is outdated +or if there is a problem with the translation. + +Chinese maintainer: TripleX Chung +--------------------------------------------------------------------- +Documentation/SubmittingPatches 的中文翻译 + +如果想评论或更新本文的内容,请直接联系原文档的维护者。如果你使用英文 +交流有困难的话,也可以向中文版维护者求助。如果本翻译更新不及时或者翻 +译存在问题,请联系中文版维护者。 + +中文版维护者: 钟宇 TripleX Chung +中文版翻译者: 钟宇 TripleX Chung +中文版校译者: 李阳 Li Yang + 王聪 Wang Cong + +以下为正文 +--------------------------------------------------------------------- + + 如何让你的改动进入内核 + 或者 + 获得亲爱的 Linus Torvalds 的关注和处理 +---------------------------------- + +对于想要将改动提交到 Linux 内核的个人或者公司来说,如果不熟悉“规矩”, +提交的流程会让人畏惧。本文档收集了一系列建议,这些建议可以大大的提高你 +的改动被接受的机会。 +阅读 Documentation/SubmitChecklist 来获得在提交代码前需要检查的项目的列 +表。如果你在提交一个驱动程序,那么同时阅读一下 +Documentation/SubmittingDrivers 。 + + +-------------------------- +第一节 - 创建并发送你的改动 +-------------------------- + +1) "diff -up" +----------- + +使用 "diff -up" 或者 "diff -uprN" 来创建补丁。 + +所有内核的改动,都是以补丁的形式呈现的,补丁由 diff(1) 生成。创建补丁的 +时候,要确认它是以 "unified diff" 格式创建的,这种格式由 diff(1) 的 '-u' +参数生成。而且,请使用 '-p' 参数,那样会显示每个改动所在的C函数,使得 +产生的补丁容易读得多。补丁应该基于内核源代码树的根目录,而不是里边的任 +何子目录。 +为一个单独的文件创建补丁,一般来说这样做就够了: + + SRCTREE= linux-2.6 + MYFILE= drivers/net/mydriver.c + + cd $SRCTREE + cp $MYFILE $MYFILE.orig + vi $MYFILE # make your change + cd .. + diff -up $SRCTREE/$MYFILE{.orig,} > /tmp/patch + +为多个文件创建补丁,你可以解开一个没有修改过的内核源代码树,然后和你自 +己的代码树之间做 diff 。例如: + + MYSRC= /devel/linux-2.6 + + tar xvfz linux-2.6.12.tar.gz + mv linux-2.6.12 linux-2.6.12-vanilla + diff -uprN -X linux-2.6.12-vanilla/Documentation/dontdiff \ + linux-2.6.12-vanilla $MYSRC > /tmp/patch + +"dontdiff" 是内核在编译的时候产生的文件的列表,列表中的文件在 diff(1) +产生的补丁里会被跳过。"dontdiff" 文件被包含在2.6.12和之后版本的内核源代 +码树中。对于更早的内核版本,你可以从 + 获取它。 +确定你的补丁里没有包含任何不属于这次补丁提交的额外文件。记得在用diff(1) +生成补丁之后,审阅一次补丁,以确保准确。 +如果你的改动很散乱,你应该研究一下如何将补丁分割成独立的部分,将改动分 +割成一系列合乎逻辑的步骤。这样更容易让其他内核开发者审核,如果你想你的 +补丁被接受,这是很重要的。下面这些脚本能够帮助你做这件事情: +Quilt: +http://savannah.nongnu.org/projects/quilt + +Andrew Morton 的补丁脚本: +http://www.zip.com.au/~akpm/linux/patches/ +作为这些脚本的替代,quilt 是值得推荐的补丁管理工具(看上面的链接)。 + +2)描述你的改动。 +描述你的改动包含的技术细节。 + +要多具体就写多具体。最糟糕的描述可能是像下面这些语句:“更新了某驱动程 +序”,“修正了某驱动程序的bug”,或者“这个补丁包含了某子系统的修改,请 +使用。” + +如果你的描述开始变长,这表示你也许需要拆分你的补丁了,请看第3小节, +继续。 + +3)拆分你的改动 + +将改动拆分,逻辑类似的放到同一个补丁文件里。 + +例如,如果你的改动里同时有bug修正和性能优化,那么把这些改动才分到两个或 +者更多的补丁文件中。如果你的改动包含对API的修改,并且修改了驱动程序来适 +应这些新的API,那么把这些修改分成两个补丁。 + +另一方面,如果你将一个单独的改动做成多个补丁文件,那么将它们合并成一个 +单独的补丁文件。这样一个逻辑上单独的改动只被包含在一个补丁文件里。 + +如果有一个补丁依赖另外一个补丁来完成它的改动,那没问题。简单的在你的补 +丁描述里指出“这个补丁依赖某补丁”就好了。 + +如果你不能将补丁浓缩成更少的文件,那么每次大约发送出15个,然后等待审查 +和整合。 + +4)选择 e-mail 的收件人 + +看一遍 MAINTAINERS 文件和源代码,看看你所的改动所在的内核子系统有没有指 +定的维护者。如果有,给他们发e-mail。 + +如果没有找到维护者,或者维护者没有反馈,将你的补丁发送到内核开发者主邮 +件列表 linux-kernel@vger.kernel.org。大部分的内核开发者都跟踪这个邮件列 +表,可以评价你的改动。 + +每次不要发送超过15个补丁到 vger 邮件列表!!! + +Linus Torvalds 是决定改动能否进入 Linux 内核的最终裁决者。他的 e-mail +地址是 。他收到的 e-mail 很多,所以一般 +的说,最好别给他发 e-mail。 + +那些修正bug,“显而易见”的修改或者是类似的只需要很少讨论的补丁可以直接 +发送或者CC给Linus。那些需要讨论或者没有很清楚的好处的补丁,一般先发送到 +linux-kernel邮件列表。只有当补丁被讨论得差不多了,才提交给Linus。 + +5)选择CC( e-mail 抄送)列表 + +除非你有理由不这样做,否则CC linux-kernel@vger.kernel.org。 + +除了 Linus 之外,其他内核开发者也需要注意到你的改动,这样他们才能评论你 +的改动并提供代码审查和建议。linux-kernel 是 Linux 内核开发者主邮件列表 +。其它的邮件列表为特定的子系统提供服务,比如 USB,framebuffer 设备,虚 +拟文件系统,SCSI 子系统,等等。查看 MAINTAINERS 文件来获得和你的改动有 +关的邮件列表。 + +Majordomo lists of VGER.KERNEL.ORG at: + + +如果改动影响了用户空间和内核之间的接口,请给 MAN-PAGES 的维护者(列在 +MAITAINERS 文件里的)发送一个手册页(man-pages)补丁,或者至少通知一下改 +变,让一些信息有途径进入手册页。 + +即使在第四步的时候,维护者没有作出回应,也要确认在修改他们的代码的时候 +,一直将维护者拷贝到CC列表中。 + +对于小的补丁,你也许会CC到 Adrian Bunk 管理的搜集琐碎补丁的邮件列表 +(Trivial Patch Monkey)trivial@kernel.org,那里专门收集琐碎的补丁。下面这样 +的补丁会被看作“琐碎的”补丁: + 文档的拼写修正。 + 修正会影响到 grep(1) 的拼写。 + 警告信息修正(频繁的打印无用的警告是不好的。) + 编译错误修正(代码逻辑的确是对的,只是编译有问题。) + 运行时修正(只要真的修正了错误。) + 移除使用了被废弃的函数/宏的代码(例如 check_region。) + 联系方式和文档修正。 + 用可移植的代码替换不可移植的代码(即使在体系结构相关的代码中,既然有 + 人拷贝,只要它是琐碎的) + 任何文件的作者/维护者对该文件的改动(例如 patch monkey 在重传模式下) + +URL: + +(译注,关于“琐碎补丁”的一些说明:因为原文的这一部分写得比较简单,所以不得不 +违例写一下译注。"trivial"这个英文单词的本意是“琐碎的,不重要的。”但是在这里 +有稍微有一些变化,例如对一些明显的NULL指针的修正,属于运行时修正,会被归类 +到琐碎补丁里。虽然NULL指针的修正很重要,但是这样的修正往往很小而且很容易得到 +检验,所以也被归入琐碎补丁。琐碎补丁更精确的归类应该是 +“simple, localized & easy to verify”,也就是说简单的,局部的和易于检验的。 +trivial@kernel.org邮件列表的目的是针对这样的补丁,为提交者提供一个中心,来 +降低提交的门槛。) + +6)没有 MIME 编码,没有链接,没有压缩,没有附件,只有纯文本。 + +Linus 和其他的内核开发者需要阅读和评论你提交的改动。对于内核开发者来说 +,可以“引用”你的改动很重要,使用一般的 e-mail 工具,他们就可以在你的 +代码的任何位置添加评论。 + +因为这个原因,所有的提交的补丁都是 e-mail 中“内嵌”的。 +警告:如果你使用剪切-粘贴你的补丁,小心你的编辑器的自动换行功能破坏你的 +补丁。 + +不要将补丁作为 MIME 编码的附件,不管是否压缩。很多流行的 e-mail 软件不 +是任何时候都将 MIME 编码的附件当作纯文本发送的,这会使得别人无法在你的 +代码中加评论。另外,MIME 编码的附件会让 Linus 多花一点时间来处理,这就 +降低了你的改动被接受的可能性。 + +警告:一些邮件软件,比如 Mozilla 会将你的信息以如下格式发送: +---- 邮件头 ---- +Content-Type: text/plain; charset=us-ascii; format=flowed +---- 邮件头 ---- +问题在于 “format=flowed” 会让接收端的某些邮件软件将邮件中的制表符替换 +成空格以及做一些类似的替换。这样,你发送的时候看起来没问题的补丁就被破 +坏了。 + +要修正这个问题,只需要将你的 mozilla 的 defaults/pref/mailnews.js 文件 +里的 +pref("mailnews.send_plaintext_flowed", false); // RFC 2646======= +修改成 +pref("mailnews.display.disable_format_flowed_support", true); +就可以了。 + +7) e-mail 的大小 + +给 Linus 发送补丁的时候,永远按照第6小节说的做。 + +大的改动对邮件列表不合适,对某些维护者也不合适。如果你的补丁,在不压缩 +的情况下,超过了40kB,那么你最好将补丁放在一个能通过 internet 访问的服 +务器上,然后用指向你的补丁的 URL 替代。 + +8) 指出你的内核版本 + +在标题和在补丁的描述中,指出补丁对应的内核的版本,是很重要的。 + +如果补丁不能干净的在最新版本的内核上打上,Linus 是不会接受它的。 + +9) 不要气馁,继续提交。 + +当你提交了改动以后,耐心地等待。如果 Linus 喜欢你的改动并且同意它,那么 +它将在下一个内核发布版本中出现。 + +然而,如果你的改动没有出现在下一个版本的内核中,可能有若干原因。减少那 +些原因,修正错误,重新提交更新后的改动,是你自己的工作。 + +Linus不给出任何评论就“丢弃”你的补丁是常见的事情。在系统中这样的事情很 +平常。如果他没有接受你的补丁,也许是由于以下原本: +* 你的补丁不能在最新版本的内核上干净的打上。 +* 你的补丁在 linux-kernel 邮件列表中没有得到充分的讨论。 +* 风格问题(参照第2小节) +* 邮件格式问题(重读本节) +* 你的改动有技术问题。 +* 他收到了成吨的 e-mail,而你的在混乱中丢失了。 +* 你让人为难。 + +有疑问的时候,在 linux-kernel 邮件列表上请求评论。 + +10) 在标题上加上 PATCH 的字样 + +Linus 和 linux-kernel 邮件列表的 e-mail 流量都很高,一个通常的约定是标 +题行以 [PATCH] 开头。这样可以让 Linus 和其他内核开发人员可以从 e-mail +的讨论中很轻易的将补丁分辨出来。 + +11)为你的工作签名 + +为了加强对谁做了何事的追踪,尤其是对那些透过好几层的维护者的补丁,我们 +建议在发送出去的补丁上加一个 “sign-off” 的过程。 + +"sign-off" 是在补丁的注释的最后的简单的一行文字,认证你编写了它或者其他 +人有权力将它作为开放源代码的补丁传递。规则很简单:如果你能认证如下信息 +: + 开发者来源证书 1.1 + 对于本项目的贡献,我认证如下信息: + (a)这些贡献是完全或者部分的由我创建,我有权利以文件中指出 + 的开放源代码许可证提交它;或者 + (b)这些贡献基于以前的工作,据我所知,这些以前的工作受恰当的开放 + 源代码许可证保护,而且,根据许可证,我有权提交修改后的贡献, + 无论是完全还是部分由我创造,这些贡献都使用同一个开放源代码许可证 + (除非我被允许用其它的许可证),正如文件中指出的;或者 + (c)这些贡献由认证(a),(b)或者(c)的人直接提供给我,而 + 且我没有修改它。 + (d)我理解并同意这个项目和贡献是公开的,贡献的记录(包括我 + 一起提交的个人记录,包括 sign-off )被永久维护并且可以和这个项目 + 或者开放源代码的许可证同步地再发行。 + 那么加入这样一行: + Signed-off-by: Random J Developer + +使用你的真名(抱歉,不能使用假名或者匿名。) + +有人在最后加上标签。现在这些东西会被忽略,但是你可以这样做,来标记公司 +内部的过程,或者只是指出关于 sign-off 的一些特殊细节。 + +12)标准补丁格式 + +标准的补丁,标题行是: + Subject: [PATCH 001/123] 子系统:一句话概述 + +标准补丁的信体存在如下部分: + + - 一个 "from" 行指出补丁作者。 + + - 一个空行 + + - 说明的主体,这些说明文字会被拷贝到描述该补丁的永久改动记录里。 + + - 一个由"---"构成的标记行 + + - 不合适放到改动记录里的额外的注解。 + + - 补丁本身(diff 输出) + +标题行的格式,使得对标题行按字母序排序非常的容易 - 很多 e-mail 客户端都 +可以支持 - 因为序列号是用零填充的,所以按数字排序和按字母排序是一样的。 + +e-mail 标题中的“子系统”标识哪个内核子系统将被打补丁。 + +e-mail 标题中的“一句话概述”扼要的描述 e-mail 中的补丁。“一句话概述” +不应该是一个文件名。对于一个补丁系列(“补丁系列”指一系列的多个相关补 +丁),不要对每个补丁都使用同样的“一句话概述”。 + +记住 e-mail 的“一句话概述”会成为该补丁的全局唯一标识。它会蔓延到 git +的改动记录里。然后“一句话概述”会被用在开发者的讨论里,用来指代这个补 +丁。用户将希望通过 google 来搜索"一句话概述"来找到那些讨论这个补丁的文 +章。 + +一些标题的例子: + + Subject: [patch 2/5] ext2: improve scalability of bitmap searching + Subject: [PATCHv2 001/207] x86: fix eflags tracking + +"from" 行是信体里的最上面一行,具有如下格式: + From: Original Author + +"from" 行指明在永久改动日志里,谁会被确认为作者。如果没有 "from" 行,那 +么邮件头里的 "From: " 行会被用来决定改动日志中的作者。 + +说明的主题将会被提交到永久的源代码改动日志里,因此对那些早已经不记得和 +这个补丁相关的讨论细节的有能力的读者来说,是有意义的。 + +"---" 标记行对于补丁处理工具要找到哪里是改动日志信息的结束,是不可缺少 +的。 + +对于 "---" 标记之后的额外注解,一个好的用途就是用来写 diffstat,用来显 +示修改了什么文件和每个文件都增加和删除了多少行。diffstat 对于比较大的补 +丁特别有用。其余那些只是和时刻或者开发者相关的注解,不合适放到永久的改 +动日志里的,也应该放这里。 +使用 diffstat的选项 "-p 1 -w 70" 这样文件名就会从内核源代码树的目录开始 +,不会占用太宽的空间(很容易适合80列的宽度,也许会有一些缩进。) + +在后面的参考资料中能看到适当的补丁格式的更多细节。 + +------------------------------- +第二节 提示,建议和诀窍 +------------------------------- + +本节包含很多和提交到内核的代码有关的通常的"规则"。事情永远有例外...但是 +你必须真的有好的理由这样做。你可以把本节叫做Linus的计算机科学入门课。 + +1) 读 Document/CodingStyle + +Nuff 说过,如果你的代码和这个偏离太多,那么它有可能会被拒绝,没有更多的 +审查,没有更多的评价。 + +2) #ifdef 是丑陋的 +混杂了 ifdef 的代码难以阅读和维护。别这样做。作为替代,将你的 ifdef 放 +在头文件里,有条件地定义 "static inline" 函数,或者宏,在代码里用这些东 +西。让编译器把那些"空操作"优化掉。 + +一个简单的例子,不好的代码: + + dev = alloc_etherdev (sizeof(struct funky_private)); + if (!dev) + return -ENODEV; + #ifdef CONFIG_NET_FUNKINESS + init_funky_net(dev); + #endif + +清理后的例子: + +(头文件里) + #ifndef CONFIG_NET_FUNKINESS + static inline void init_funky_net (struct net_device *d) {} + #endif + +(代码文件里) + dev = alloc_etherdev (sizeof(struct funky_private)); + if (!dev) + return -ENODEV; + init_funky_net(dev); + +3) 'static inline' 比宏好 + +Static inline 函数相比宏来说,是好得多的选择。Static inline 函数提供了 +类型安全,没有长度限制,没有格式限制,在 gcc 下开销和宏一样小。 + +宏只在 static inline 函数不是最优的时候[在 fast paths 里有很少的独立的 +案例],或者不可能用 static inline 函数的时候[例如字符串分配]。 +应该用 'static inline' 而不是 'static __inline__', 'extern inline' 和 +'extern __inline__' 。 + +4) 不要过度设计 + +不要试图预计模糊的未来事情,这些事情也许有用也许没有用:"让事情尽可能的 +简单,而不是更简单"。 + +---------------- +第三节 参考文献 +---------------- + +Andrew Morton, "The perfect patch" (tpp). + + +Jeff Garzik, "Linux kernel patch submission format". + + +Greg Kroah-Hartman, "How to piss off a kernel subsystem maintainer". + + + + + +NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org people! + + +Kernel Documentation/CodingStyle: + + +Linus Torvalds's mail on the canonical patch format: + +-- -- cgit v1.2.3-59-g8ed1b From 09792200e465db0861dee25bdecfc55278907ed3 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 24 Oct 2007 00:51:11 +0800 Subject: Chinese: add translation of SubmittingDrivers Signed-off-by: Li Yang Signed-off-by: Greg Kroah-Hartman --- Documentation/zh_CN/SubmittingDrivers | 168 ++++++++++++++++++++++++++++++++++ 1 file changed, 168 insertions(+) create mode 100644 Documentation/zh_CN/SubmittingDrivers diff --git a/Documentation/zh_CN/SubmittingDrivers b/Documentation/zh_CN/SubmittingDrivers new file mode 100644 index 000000000000..5f4815c63ec7 --- /dev/null +++ b/Documentation/zh_CN/SubmittingDrivers @@ -0,0 +1,168 @@ +Chinese translated version of Documentation/SubmittingDrivers + +If you have any comment or update to the content, please contact the +original document maintainer directly. However, if you have a problem +communicating in English you can also ask the Chinese maintainer for +help. Contact the Chinese maintainer if this translation is outdated +or if there is a problem with the translation. + +Chinese maintainer: Li Yang +--------------------------------------------------------------------- +Documentation/SubmittingDrivers 的中文翻译 + +如果想评论或更新本文的内容,请直接联系原文档的维护者。如果你使用英文 +交流有困难的话,也可以向中文版维护者求助。如果本翻译更新不及时或者翻 +译存在问题,请联系中文版维护者。 + +中文版维护者: 李阳 Li Yang +中文版翻译者: 李阳 Li Yang +中文版校译者: 陈琦 Maggie Chen + 王聪 Wang Cong + 张巍 Zhang Wei + +以下为正文 +--------------------------------------------------------------------- + +如何向 Linux 内核提交驱动程序 +----------------------------- + +这篇文档将会解释如何向不同的内核源码树提交设备驱动程序。请注意,如果你感 +兴趣的是显卡驱动程序,你也许应该访问 XFree86 项目(http://www.xfree86.org/) +和/或 X.org 项目 (http://x.org)。 + +另请参阅 Documentation/SubmittingPatches 文档。 + + +分配设备号 +---------- + +块设备和字符设备的主设备号与从设备号是由 Linux 命名编号分配权威 LANANA( +现在是 Torben Mathiasen)负责分配。申请的网址是 http://www.lanana.org/。 +即使不准备提交到主流内核的设备驱动也需要在这里分配设备号。有关详细信息, +请参阅 Documentation/devices.txt。 + +如果你使用的不是已经分配的设备号,那么当你提交设备驱动的时候,它将会被强 +制分配一个新的设备号,即便这个设备号和你之前发给客户的截然不同。 + +设备驱动的提交对象 +------------------ + +Linux 2.0: + 此内核源码树不接受新的驱动程序。 + +Linux 2.2: + 此内核源码树不接受新的驱动程序。 + +Linux 2.4: + 如果所属的代码领域在内核的 MAINTAINERS 文件中列有一个总维护者, + 那么请将驱动程序提交给他。如果此维护者没有回应或者你找不到恰当的 + 维护者,那么请联系 Willy Tarreau 。 + +Linux 2.6: + 除了遵循和 2.4 版内核同样的规则外,你还需要在 linux-kernel 邮件 + 列表上跟踪最新的 API 变化。向 Linux 2.6 内核提交驱动的顶级联系人 + 是 Andrew Morton 。 + +决定设备驱动能否被接受的条件 +---------------------------- + +许可: 代码必须使用 GNU 通用公开许可证 (GPL) 提交给 Linux,但是 + 我们并不要求 GPL 是唯一的许可。你或许会希望同时使用多种 + 许可证发布,如果希望驱动程序可以被其他开源社区(比如BSD) + 使用。请参考 include/linux/module.h 文件中所列出的可被 + 接受共存的许可。 + +版权: 版权所有者必须同意使用 GPL 许可。最好提交者和版权所有者 + 是相同个人或实体。否则,必需列出授权使用 GPL 的版权所有 + 人或实体,以备验证之需。 + +接口: 如果你的驱动程序使用现成的接口并且和其他同类的驱动程序行 + 为相似,而不是去发明无谓的新接口,那么它将会更容易被接受。 + 如果你需要一个 Linux 和 NT 的通用驱动接口,那么请在用 + 户空间实现它。 + +代码: 请使用 Documentation/CodingStyle 中所描述的 Linux 代码风 + 格。如果你的某些代码段(例如那些与 Windows 驱动程序包共 + 享的代码段)需要使用其他格式,而你却只希望维护一份代码, + 那么请将它们很好地区分出来,并且注明原因。 + +可移植性: 请注意,指针并不永远是 32 位的,不是所有的计算机都使用小 + 尾模式 (little endian) 存储数据,不是所有的人都拥有浮点 + 单元,不要随便在你的驱动程序里嵌入 x86 汇编指令。只能在 + x86 上运行的驱动程序一般是不受欢迎的。虽然你可能只有 x86 + 硬件,很难测试驱动程序在其他平台上是否可用,但是确保代码 + 可以被轻松地移植却是很简单的。 + +清晰度: 做到所有人都能修补这个驱动程序将会很有好处,因为这样你将 + 会直接收到修复的补丁而不是 bug 报告。如果你提交一个试图 + 隐藏硬件工作机理的驱动程序,那么它将会被扔进废纸篓。 + +电源管理: 因为 Linux 正在被很多移动设备和桌面系统使用,所以你的驱 + 动程序也很有可能被使用在这些设备上。它应该支持最基本的电 + 源管理,即在需要的情况下实现系统级休眠和唤醒要用到的 + .suspend 和 .resume 函数。你应该检查你的驱动程序是否能正 + 确地处理休眠与唤醒,如果实在无法确认,请至少把 .suspend + 函数定义成返回 -ENOSYS(功能未实现)错误。你还应该尝试确 + 保你的驱动在什么都不干的情况下将耗电降到最低。要获得驱动 + 程序测试的指导,请参阅 + Documentation/power/drivers-testing.txt。有关驱动程序电 + 源管理问题相对全面的概述,请参阅 + Documentation/power/devices.txt。 + +管理: 如果一个驱动程序的作者还在进行有效的维护,那么通常除了那 + 些明显正确且不需要任何检查的补丁以外,其他所有的补丁都会 + 被转发给作者。如果你希望成为驱动程序的联系人和更新者,最 + 好在代码注释中写明并且在 MAINTAINERS 文件中加入这个驱动 + 程序的条目。 + +不影响设备驱动能否被接受的条件 +------------------------------ + +供应商: 由硬件供应商来维护驱动程序通常是一件好事。不过,如果源码 + 树里已经有其他人提供了可稳定工作的驱动程序,那么请不要期 + 望“我是供应商”会成为内核改用你的驱动程序的理由。理想的情 + 况是:供应商与现有驱动程序的作者合作,构建一个统一完美的 + 驱动程序。 + +作者: 驱动程序是由大的 Linux 公司研发还是由你个人编写,并不影 + 响其是否能被内核接受。没有人对内核源码树享有特权。只要你 + 充分了解内核社区,你就会发现这一点。 + + +资源列表 +-------- + +Linux 内核主源码树: + ftp.??.kernel.org:/pub/linux/kernel/... + ?? == 你的国家代码,例如 "cn"、"us"、"uk"、"fr" 等等 + +Linux 内核邮件列表: + linux-kernel@vger.kernel.org + [可通过向majordomo@vger.kernel.org发邮件来订阅] + +Linux 设备驱动程序,第三版(探讨 2.6.10 版内核): + http://lwn.net/Kernel/LDD3/ (免费版) + +LWN.net: + 每周内核开发活动摘要 - http://lwn.net/ + 2.6 版中 API 的变更: + http://lwn.net/Articles/2.6-kernel-api/ + 将旧版内核的驱动程序移植到 2.6 版: + http://lwn.net/Articles/driver-porting/ + +KernelTrap: + Linux 内核的最新动态以及开发者访谈 + http://kerneltrap.org/ + +内核新手(KernelNewbies): + 为新的内核开发者提供文档和帮助 + http://kernelnewbies.org/ + +Linux USB项目: + http://www.linux-usb.org/ + +写内核驱动的“不要”(Arjan van de Ven著): + http://www.fenrus.org/how-to-not-write-a-device-driver-paper.pdf + +内核清洁工 (Kernel Janitor): + http://janitor.kernelnewbies.org/ -- cgit v1.2.3-59-g8ed1b From d1a1d45142ed3969b3cc3964f81e4249f9e49fbf Mon Sep 17 00:00:00 2001 From: Dave Young Date: Wed, 24 Oct 2007 01:14:29 +0800 Subject: Chinese: add translation of oops-tracing.txt Signed-off-by: Dave Young Signed-off-by: Li Yang Signed-off-by: Greg Kroah-Hartman --- Documentation/zh_CN/oops-tracing.txt | 212 +++++++++++++++++++++++++++++++++++ 1 file changed, 212 insertions(+) create mode 100644 Documentation/zh_CN/oops-tracing.txt diff --git a/Documentation/zh_CN/oops-tracing.txt b/Documentation/zh_CN/oops-tracing.txt new file mode 100644 index 000000000000..9312608ffb8d --- /dev/null +++ b/Documentation/zh_CN/oops-tracing.txt @@ -0,0 +1,212 @@ +Chinese translated version of Documentation/oops-tracing.txt + +If you have any comment or update to the content, please contact the +original document maintainer directly. However, if you have a problem +communicating in English you can also ask the Chinese maintainer for +help. Contact the Chinese maintainer if this translation is outdated +or if there is a problem with the translation. + +Chinese maintainer: Dave Young +--------------------------------------------------------------------- +Documentation/oops-tracing.txt 的中文翻译 + +如果想评论或更新本文的内容,请直接联系原文档的维护者。如果你使用英文 +交流有困难的话,也可以向中文版维护者求助。如果本翻译更新不及时或者翻 +译存在问题,请联系中文版维护者。 + +中文版维护者: 杨瑞 Dave Young +中文版翻译者: 杨瑞 Dave Young +中文版校译者: 李阳 Li Yang + 王聪 Wang Cong + +以下为正文 +--------------------------------------------------------------------- + +注意: ksymoops 在2.6中是没有用的。 请以原有格式使用Oops(来自dmesg,等等)。 +忽略任何这样那样关于“解码Oops”或者“通过ksymoops运行”的文档。 如果你贴出运行过 +ksymoops的来自2.6的Oops,人们只会让你重贴一次。 + +快速总结 +------------- + +发现Oops并发送给看似相关的内核领域的维护者。别太担心对不上号。如果你不确定就发给 +和你所做的事情相关的代码的负责人。 如果可重现试着描述怎样重构。 那甚至比oops更有 +价值。 + +如果你对于发送给谁一无所知, 发给linux-kernel@vger.kernel.org。感谢你帮助Linux +尽可能地稳定。 + +Oops在哪里? +---------------------- + +通常Oops文本由klogd从内核缓冲区里读取并传给syslogd,由syslogd写到syslog文件中, +典型地是/var/log/messages(依赖于/etc/syslog.conf)。有时klogd崩溃了,这种情况下你 +能够运行dmesg > file来从内核缓冲区中读取数据并保存下来。 否则你可以 +cat /proc/kmsg > file, 然而你必须介入中止传输, kmsg是一个“永不结束的文件”。如 +果机器崩溃坏到你不能输入命令或者磁盘不可用那么你有三种选择:- + +(1) 手抄屏幕上的文本待机器重启后再输入计算机。 麻烦但如果没有针对崩溃的准备, +这是仅有的选择。 另外,你可以用数码相机把屏幕拍下来-不太好,但比没有强。 如果信 +息滚动到了终端的上面,你会发现以高分辩率启动(比如,vga=791)会让你读到更多的文 +本。(注意:这需要vesafb,所以对‘早期’的oops没有帮助) + +(2)用串口终端启动(请参看Documentation/serial-console.txt),运行一个null +modem到另一台机器并用你喜欢的通讯工具获取输出。Minicom工作地很好。 + +(3)使用Kdump(请参看Documentation/kdump/kdump.txt), +使用在Documentation/kdump/gdbmacros.txt中定义的dmesg gdb宏,从旧的内存中提取内核 +环形缓冲区。 + +完整信息 +---------------- + +注意:以下来自于Linus的邮件适用于2.4内核。 我因为历史原因保留了它,并且因为其中 +一些信息仍然适用。 特别注意的是,请忽略任何ksymoops的引用。 + +From: Linus Torvalds + +怎样跟踪Oops.. [原发到linux-kernel的一封邮件] + +主要的窍门是有五年和这些烦人的oops消息打交道的经验;-) + +实际上,你有办法使它更简单。我有两个不同的方法: + + gdb /usr/src/linux/vmlinux + gdb> disassemble + +那是发现问题的简单办法,至少如果bug报告做的好的情况下(象这个一样-运行ksymoops +得到oops发生的函数及函数内的偏移)。 + +哦,如果报告发生的内核以相同的编译器和相似的配置编译它会有帮助的。 + +另一件要做的事是反汇编bug报告的“Code”部分:ksymoops也会用正确的工具来做这件事, +但如果没有那些工具你可以写一个傻程序: + + char str[] = "\xXX\xXX\xXX..."; + main(){} + +并用gcc -g编译它然后执行“disassemble str”(XX部分是由Oops报告的值-你可以仅剪切 +粘贴并用“\x”替换空格-我就是这么做的,因为我懒得写程序自动做这一切)。 + +另外,你可以用scripts/decodecode这个shell脚本。它的使用方法是: +decodecode < oops.txt + +“Code”之后的十六进制字节可能(在某些架构上)有一些当前指令之前的指令字节以及 +当前和之后的指令字节 + +Code: f9 0f 8d f9 00 00 00 8d 42 0c e8 dd 26 11 c7 a1 60 ea 2b f9 8b 50 08 a1 +64 ea 2b f9 8d 34 82 8b 1e 85 db 74 6d 8b 15 60 ea 2b f9 <8b> 43 04 39 42 54 +7e 04 40 89 42 54 8b 43 04 3b 05 00 f6 52 c0 + +最后,如果你想知道代码来自哪里,你可以: + + cd /usr/src/linux + make fs/buffer.s # 或任何产生BUG的文件 + +然后你会比gdb反汇编更清楚的知道发生了什么。 + +现在,问题是把你所拥有的所有数据结合起来:C源码(关于它应该怎样的一般知识), +汇编代码及其反汇编得到的代码(另外还有从“oops”消息得到的寄存器状态-对了解毁坏的 +指针有用,而且当你有了汇编代码你也能拿其它的寄存器和任何它们对应的C表达式做匹配 +)。 + +实际上,你仅需看看哪里不匹配(这个例子是“Code”反汇编和编译器生成的代码不匹配)。 +然后你须要找出为什么不匹配。通常很简单-你看到代码使用了空指针然后你看代码想知道 +空指针是怎么出现的,还有检查它是否合法.. + +现在,如果明白这是一项耗时的工作而且需要一丁点儿的专心,没错。这就是我为什么大多 +只是忽略那些没有符号表信息的崩溃报告的原因:简单的说太难查找了(我有一些 +程序用于在内核代码段中搜索特定的模式,而且有时我也已经能找出那些崩溃的地方,但是 +仅仅是找出正确的序列也确实需要相当扎实的内核知识) + +_有时_会发生这种情况,我仅看到崩溃中的反汇编代码序列, 然后我马上就明白问题出在 +哪里。这时我才意识到自己干这个工作已经太长时间了;-) + + Linus + + +--------------------------------------------------------------------------- +关于Oops跟踪的注解: + +为了帮助Linus和其它内核开发者,klogd纳入了大量的支持来处理保护错误。为了拥有对 +地址解析的完整支持至少应该使用1.3-pl3的sysklogd包。 + +当保护错误发生时,klogd守护进程自动把内核日志信息中的重要地址翻译成它们相应的符 +号。 + +klogd执行两种类型的地址解析。首先是静态翻译其次是动态翻译。静态翻译和ksymoops +一样使用System.map文件。为了做静态翻译klogd守护进程必须在初始化时能找到system +map文件。关于klogd怎样搜索map文件请参看klogd手册页。 + +动态地址翻译在使用内核可装载模块时很重要。 因为内核模块的内存是从内核动态内存池 +里分配的,所以不管是模块开始位置还是模块中函数和符号的位置都不是固定的。 + +内核支持允许程序决定装载哪些模块和它们在内存中位置的系统调用。使用这些系统调用 +klogd守护进程生成一张符号表用于调试发生在可装载模块中的保护错误。 + +至少klogd会提供产生保护错误的模块名。还可有额外的符号信息供可装载模块开发者选择 +以从模块中输出符号信息。 + +因为内核模块环境可能是动态的,所以必须有一种机制当模块环境发生改变时来通知klogd +守护进程。 有一些可用的命令行选项允许klogd向当前执行中的守护进程发送信号,告知符 +号信息应该被刷新了。 更多信息请参看klogd手册页。 + +sysklogd发布时包含一个补丁修改了modules-2.0.0包,无论何时一个模块装载或者卸载都 +会自动向klogd发送信号。打上这个补丁提供了必要的对调试发生于内核可装载模块的保护 +错误的无缝支持。 + +以下是被klogd处理过的发生在可装载模块中的一个保护错误例子: +--------------------------------------------------------------------------- +Aug 29 09:51:01 blizard kernel: Unable to handle kernel paging request at virtual address f15e97cc +Aug 29 09:51:01 blizard kernel: current->tss.cr3 = 0062d000, %cr3 = 0062d000 +Aug 29 09:51:01 blizard kernel: *pde = 00000000 +Aug 29 09:51:01 blizard kernel: Oops: 0002 +Aug 29 09:51:01 blizard kernel: CPU: 0 +Aug 29 09:51:01 blizard kernel: EIP: 0010:[oops:_oops+16/3868] +Aug 29 09:51:01 blizard kernel: EFLAGS: 00010212 +Aug 29 09:51:01 blizard kernel: eax: 315e97cc ebx: 003a6f80 ecx: 001be77b edx: 00237c0c +Aug 29 09:51:01 blizard kernel: esi: 00000000 edi: bffffdb3 ebp: 00589f90 esp: 00589f8c +Aug 29 09:51:01 blizard kernel: ds: 0018 es: 0018 fs: 002b gs: 002b ss: 0018 +Aug 29 09:51:01 blizard kernel: Process oops_test (pid: 3374, process nr: 21, stackpage=00589000) +Aug 29 09:51:01 blizard kernel: Stack: 315e97cc 00589f98 0100b0b4 bffffed4 0012e38e 00240c64 003a6f80 00000001 +Aug 29 09:51:01 blizard kernel: 00000000 00237810 bfffff00 0010a7fa 00000003 00000001 00000000 bfffff00 +Aug 29 09:51:01 blizard kernel: bffffdb3 bffffed4 ffffffda 0000002b 0007002b 0000002b 0000002b 00000036 +Aug 29 09:51:01 blizard kernel: Call Trace: [oops:_oops_ioctl+48/80] [_sys_ioctl+254/272] [_system_call+82/128] +Aug 29 09:51:01 blizard kernel: Code: c7 00 05 00 00 00 eb 08 90 90 90 90 90 90 90 90 89 ec 5d c3 +--------------------------------------------------------------------------- + +Dr. G.W. Wettstein Oncology Research Div. Computing Facility +Roger Maris Cancer Center INTERNET: greg@wind.rmcc.com +820 4th St. N. +Fargo, ND 58122 +Phone: 701-234-7556 + + +--------------------------------------------------------------------------- +受污染的内核 + +一些oops报告在程序记数器之后包含字符串'Tainted: '。这表明内核已经被一些东西给污 +染了。 该字符串之后紧跟着一系列的位置敏感的字符,每个代表一个特定的污染值。 + + 1:'G'如果所有装载的模块都有GPL或相容的许可证,'P'如果装载了任何的专有模块。 +没有模块MODULE_LICENSE或者带有insmod认为是与GPL不相容的的MODULE_LICENSE的模块被 +认定是专有的。 + + 2:'F'如果有任何通过“insmod -f”被强制装载的模块,' '如果所有模块都被正常装载。 + + 3:'S'如果oops发生在SMP内核中,运行于没有证明安全运行多处理器的硬件。 当前这种 +情况仅限于几种不支持SMP的速龙处理器。 + + 4:'R'如果模块通过“insmod -f”被强制装载,' '如果所有模块都被正常装载。 + + 5:'M'如果任何处理器报告了机器检查异常,' '如果没有发生机器检查异常。 + + 6:'B'如果页释放函数发现了一个错误的页引用或者一些非预期的页标志。 + + 7:'U'如果用户或者用户应用程序特别请求设置污染标志,否则' '。 + + 8:'D'如果内核刚刚死掉,比如有OOPS或者BUG。 + +使用'Tainted: '字符串的主要原因是要告诉内核调试者,这是否是一个干净的内核亦或发 +生了任何的不正常的事。污染是永久的:即使出错的模块已经被卸载了,污染值仍然存在, +以表明内核不再值得信任。 -- cgit v1.2.3-59-g8ed1b From 6941ee8896bfc462c3e3ad113c769a57ecbf3b2a Mon Sep 17 00:00:00 2001 From: TripleX Chung Date: Wed, 24 Oct 2007 00:57:24 +0800 Subject: Chinese: add translation of stable_kernel_rules.txt Signed-off-by: TripleX Chung Signed-off-by: Li Yang Signed-off-by: Greg Kroah-Hartman --- Documentation/zh_CN/stable_kernel_rules.txt | 66 +++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) create mode 100644 Documentation/zh_CN/stable_kernel_rules.txt diff --git a/Documentation/zh_CN/stable_kernel_rules.txt b/Documentation/zh_CN/stable_kernel_rules.txt new file mode 100644 index 000000000000..b5b9b0ab02fd --- /dev/null +++ b/Documentation/zh_CN/stable_kernel_rules.txt @@ -0,0 +1,66 @@ +Chinese translated version of Documentation/stable_kernel_rules.txt + +If you have any comment or update to the content, please contact the +original document maintainer directly. However, if you have a problem +communicating in English you can also ask the Chinese maintainer for +help. Contact the Chinese maintainer if this translation is outdated +or if there is a problem with the translation. + +Chinese maintainer: TripleX Chung +--------------------------------------------------------------------- +Documentation/stable_kernel_rules.txt 的中文翻译 + +如果想评论或更新本文的内容,请直接联系原文档的维护者。如果你使用英文 +交流有困难的话,也可以向中文版维护者求助。如果本翻译更新不及时或者翻 +译存在问题,请联系中文版维护者。 + + +中文版维护者: 钟宇 TripleX Chung +中文版翻译者: 钟宇 TripleX Chung +中文版校译者: 李阳 Li Yang + Kangkai Yin + +以下为正文 +--------------------------------------------------------------------- + +关于Linux 2.6稳定版发布,所有你想知道的事情。 + +关于哪些类型的补丁可以被接收进入稳定版代码树,哪些不可以的规则: + + - 必须是显而易见的正确,并且经过测试的。 + - 连同上下文,不能大于100行。 + - 必须只修正一件事情。 + - 必须修正了一个给大家带来麻烦的真正的bug(不是“这也许是一个问题...” + 那样的东西)。 + - 必须修正带来如下后果的问题:编译错误(对被标记为CONFIG_BROKEN的例外), + 内核崩溃,挂起,数据损坏,真正的安全问题,或者一些类似“哦,这不 + 好”的问题。简短的说,就是一些致命的问题。 + - 没有“理论上的竞争条件”,除非能给出竞争条件如何被利用的解释。 + - 不能存在任何的“琐碎的”修正(拼写修正,去掉多余空格之类的)。 + - 必须被相关子系统的维护者接受。 + - 必须遵循Documentation/SubmittingPatches里的规则。 + +向稳定版代码树提交补丁的过程: + + - 在确认了补丁符合以上的规则后,将补丁发送到stable@kernel.org。 + - 如果补丁被接受到队列里,发送者会收到一个ACK回复,如果没有被接受,收 + 到的是NAK回复。回复需要几天的时间,这取决于开发者的时间安排。 + - 被接受的补丁会被加到稳定版本队列里,等待其他开发者的审查。 + - 安全方面的补丁不要发到这个列表,应该发送到security@kernel.org。 + +审查周期: + + - 当稳定版的维护者决定开始一个审查周期,补丁将被发送到审查委员会,以 + 及被补丁影响的领域的维护者(除非提交者就是该领域的维护者)并且抄送 + 到linux-kernel邮件列表。 + - 审查委员会有48小时的时间,用来决定给该补丁回复ACK还是NAK。 + - 如果委员会中有成员拒绝这个补丁,或者linux-kernel列表上有人反对这个 + 补丁,并提出维护者和审查委员会之前没有意识到的问题,补丁会从队列中 + 丢弃。 + - 在审查周期结束的时候,那些得到ACK回应的补丁将会被加入到最新的稳定版 + 发布中,一个新的稳定版发布就此产生。 + - 安全性补丁将从内核安全小组那里直接接收到稳定版代码树中,而不是通过 + 通常的审查周期。请联系内核安全小组以获得关于这个过程的更多细节。 + +审查委员会: + - 由一些自愿承担这项任务的内核开发者,和几个非志愿的组成。 -- cgit v1.2.3-59-g8ed1b From c642ecf874028c9f41d18d59a9d663c2a954cc45 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Wed, 24 Oct 2007 01:00:23 +0800 Subject: Chinese: add translation of volatile-considered-harmful.txt Signed-off-by: Bryan Wu Signed-off-by: Li Yang Signed-off-by: Greg Kroah-Hartman --- .../zh_CN/volatile-considered-harmful.txt | 113 +++++++++++++++++++++ 1 file changed, 113 insertions(+) create mode 100644 Documentation/zh_CN/volatile-considered-harmful.txt diff --git a/Documentation/zh_CN/volatile-considered-harmful.txt b/Documentation/zh_CN/volatile-considered-harmful.txt new file mode 100644 index 000000000000..ba8149d2233a --- /dev/null +++ b/Documentation/zh_CN/volatile-considered-harmful.txt @@ -0,0 +1,113 @@ +Chinese translated version of Documentation/volatile-considered-harmful.txt + +If you have any comment or update to the content, please contact the +original document maintainer directly. However, if you have a problem +communicating in English you can also ask the Chinese maintainer for +help. Contact the Chinese maintainer if this translation is outdated +or if there is a problem with the translation. + +Maintainer: Jonathan Corbet +Chinese maintainer: Bryan Wu +--------------------------------------------------------------------- +Documentation/volatile-considered-harmful.txt 的中文翻译 + +如果想评论或更新本文的内容,请直接联系原文档的维护者。如果你使用英文 +交流有困难的话,也可以向中文版维护者求助。如果本翻译更新不及时或者翻 +译存在问题,请联系中文版维护者。 + +英文版维护者: Jonathan Corbet +中文版维护者: 伍鹏 Bryan Wu +中文版翻译者: 伍鹏 Bryan Wu +中文版校译者: 张汉辉 Eugene Teo + 杨瑞 Dave Young +以下为正文 +--------------------------------------------------------------------- + +为什么不应该使用“volatile”类型 +------------------------------ + +C程序员通常认为volatile表示某个变量可以在当前执行的线程之外被改变;因此,在内核 +中用到共享数据结构时,常常会有C程序员喜欢使用volatile这类变量。换句话说,他们经 +常会把volatile类型看成某种简易的原子变量,当然它们不是。在内核中使用volatile几 +乎总是错误的;本文档将解释为什么这样。 + +理解volatile的关键是知道它的目的是用来消除优化,实际上很少有人真正需要这样的应 +用。在内核中,程序员必须防止意外的并发访问破坏共享的数据结构,这其实是一个完全 +不同的任务。用来防止意外并发访问的保护措施,可以更加高效的避免大多数优化相关的 +问题。 + +像volatile一样,内核提供了很多原语来保证并发访问时的数据安全(自旋锁, 互斥量,内 +存屏障等等),同样可以防止意外的优化。如果可以正确使用这些内核原语,那么就没有 +必要再使用volatile。如果仍然必须使用volatile,那么几乎可以肯定在代码的某处有一 +个bug。在正确设计的内核代码中,volatile能带来的仅仅是使事情变慢。 + +思考一下这段典型的内核代码: + + spin_lock(&the_lock); + do_something_on(&shared_data); + do_something_else_with(&shared_data); + spin_unlock(&the_lock); + +如果所有的代码都遵循加锁规则,当持有the_lock的时候,不可能意外的改变shared_data的 +值。任何可能访问该数据的其他代码都会在这个锁上等待。自旋锁原语跟内存屏障一样—— 它 +们显式的用来书写成这样 —— 意味着数据访问不会跨越它们而被优化。所以本来编译器认为 +它知道在shared_data里面将有什么,但是因为spin_lock()调用跟内存屏障一样,会强制编 +译器忘记它所知道的一切。那么在访问这些数据时不会有优化的问题。 + +如果shared_data被声名为volatile,锁操作将仍然是必须的。就算我们知道没有其他人正在 +使用它,编译器也将被阻止优化对临界区内shared_data的访问。在锁有效的同时, +shared_data不是volatile的。在处理共享数据的时候,适当的锁操作可以不再需要 +volatile —— 并且是有潜在危害的。 + +volatile的存储类型最初是为那些内存映射的I/O寄存器而定义。在内核里,寄存器访问也应 +该被锁保护,但是人们也不希望编译器“优化”临界区内的寄存器访问。内核里I/O的内存访问 +是通过访问函数完成的;不赞成通过指针对I/O内存的直接访问,并且不是在所有体系架构上 +都能工作。那些访问函数正是为了防止意外优化而写的,因此,再说一次,volatile类型不 +是必需的。 + +另一种引起用户可能使用volatile的情况是当处理器正忙着等待一个变量的值。正确执行一 +个忙等待的方法是: + + while (my_variable != what_i_want) + cpu_relax(); + +cpu_relax()调用会降低CPU的能量消耗或者让位于超线程双处理器;它也作为内存屏障一样出 +现,所以,再一次,volatile不是必需的。当然,忙等待一开始就是一种反常规的做法。 + +在内核中,一些稀少的情况下volatile仍然是有意义的: + + - 在一些体系架构的系统上,允许直接的I/0内存访问,那么前面提到的访问函数可以使用 + volatile。基本上,每一个访问函数调用它自己都是一个小的临界区域并且保证了按照 + 程序员期望的那样发生访问操作。 + + - 某些会改变内存的内联汇编代码虽然没有什么其他明显的附作用,但是有被GCC删除的可 + 能性。在汇编声明中加上volatile关键字可以防止这种删除操作。 + + - Jiffies变量是一种特殊情况,虽然每次引用它的时候都可以有不同的值,但读jiffies + 变量时不需要任何特殊的加锁保护。所以jiffies变量可以使用volatile,但是不赞成 + 其他跟jiffies相同类型变量使用volatile。Jiffies被认为是一种“愚蠢的遗留物" + (Linus的话)因为解决这个问题比保持现状要麻烦的多。 + + - 由于某些I/0设备可能会修改连续一致的内存,所以有时,指向连续一致内存的数据结构 + 的指针需要正确的使用volatile。网络适配器使用的环状缓存区正是这类情形的一个例 + 子,其中适配器用改变指针来表示哪些描述符已经处理过了。 + +对于大多代码,上述几种可以使用volatile的情况都不适用。所以,使用volatile是一种 +bug并且需要对这样的代码额外仔细检查。那些试图使用volatile的开发人员需要退一步想想 +他们真正想实现的是什么。 + +非常欢迎删除volatile变量的补丁 - 只要证明这些补丁完整的考虑了并发问题。 + +注释 +---- + +[1] http://lwn.net/Articles/233481/ +[2] http://lwn.net/Articles/233482/ + +致谢 +---- + +最初由Randy Dunlap推动并作初步研究 +由Jonathan Corbet撰写 +参考Satyam Sharma,Johannes Stezenbach,Jesper Juhl,Heikki Orsila, +H. Peter Anvin,Philipp Hahn和Stefan Richter的意见改善了本档。 -- cgit v1.2.3-59-g8ed1b From 22033d38bca82a4a511450562086c69f5dc457ee Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 24 Oct 2007 01:04:21 +0800 Subject: Chinese: add translation of sparse.txt Signed-off-by: Li Yang Signed-off-by: Greg Kroah-Hartman --- Documentation/zh_CN/sparse.txt | 100 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 100 insertions(+) create mode 100644 Documentation/zh_CN/sparse.txt diff --git a/Documentation/zh_CN/sparse.txt b/Documentation/zh_CN/sparse.txt new file mode 100644 index 000000000000..75992a603ae3 --- /dev/null +++ b/Documentation/zh_CN/sparse.txt @@ -0,0 +1,100 @@ +Chinese translated version of Documentation/sparse.txt + +If you have any comment or update to the content, please contact the +original document maintainer directly. However, if you have a problem +communicating in English you can also ask the Chinese maintainer for +help. Contact the Chinese maintainer if this translation is outdated +or if there is a problem with the translation. + +Chinese maintainer: Li Yang +--------------------------------------------------------------------- +Documentation/sparse.txt 的中文翻译 + +如果想评论或更新本文的内容,请直接联系原文档的维护者。如果你使用英文 +交流有困难的话,也可以向中文版维护者求助。如果本翻译更新不及时或者翻 +译存在问题,请联系中文版维护者。 + +中文版维护者: 李阳 Li Yang +中文版翻译者: 李阳 Li Yang + + +以下为正文 +--------------------------------------------------------------------- + +Copyright 2004 Linus Torvalds +Copyright 2004 Pavel Machek +Copyright 2006 Bob Copeland + +使用 sparse 工具做类型检查 +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +"__bitwise" 是一种类型属性,所以你应该这样使用它: + + typedef int __bitwise pm_request_t; + + enum pm_request { + PM_SUSPEND = (__force pm_request_t) 1, + PM_RESUME = (__force pm_request_t) 2 + }; + +这样会使 PM_SUSPEND 和 PM_RESUME 成为位方式(bitwise)整数(使用"__force" +是因为 sparse 会抱怨改变位方式的类型转换,但是这里我们确实需要强制进行转 +换)。而且因为所有枚举值都使用了相同的类型,这里的"enum pm_request"也将 +会使用那个类型做为底层实现。 + +而且使用 gcc 编译的时候,所有的 __bitwise/__force 都会消失,最后在 gcc +看来它们只不过是普通的整数。 + +坦白来说,你并不需要使用枚举类型。上面那些实际都可以浓缩成一个特殊的"int +__bitwise"类型。 + +所以更简单的办法只要这样做: + + typedef int __bitwise pm_request_t; + + #define PM_SUSPEND ((__force pm_request_t) 1) + #define PM_RESUME ((__force pm_request_t) 2) + +现在你就有了严格的类型检查所需要的所有基础架构。 + +一个小提醒:常数整数"0"是特殊的。你可以直接把常数零当作位方式整数使用而 +不用担心 sparse 会抱怨。这是因为"bitwise"(恰如其名)是用来确保不同位方 +式类型不会被弄混(小尾模式,大尾模式,cpu尾模式,或者其他),对他们来说 +常数"0"确实是特殊的。 + +获取 sparse 工具 +~~~~~~~~~~~~~~~~ + +你可以从 Sparse 的主页获取最新的发布版本: + + http://www.kernel.org/pub/linux/kernel/people/josh/sparse/ + +或者,你也可以使用 git 克隆最新的 sparse 开发版本: + + git://git.kernel.org/pub/scm/linux/kernel/git/josh/sparse.git + +DaveJ 把每小时自动生成的 git 源码树 tar 包放在以下地址: + + http://www.codemonkey.org.uk/projects/git-snapshots/sparse/ + +一旦你下载了源码,只要以普通用户身份运行: + + make + make install + +它将会被自动安装到你的 ~/bin 目录下。 + +使用 sparse 工具 +~~~~~~~~~~~~~~~~ + +用"make C=1"命令来编译内核,会对所有重新编译的 C 文件使用 sparse 工具。 +或者使用"make C=2"命令,无论文件是否被重新编译都会对其使用 sparse 工具。 +如果你已经编译了内核,用后一种方式可以很快地检查整个源码树。 + +make 的可选变量 CHECKFLAGS 可以用来向 sparse 工具传递参数。编译系统会自 +动向 sparse 工具传递 -Wbitwise 参数。你可以定义 __CHECK_ENDIAN__ 来进行 +大小尾检查。 + + make C=2 CHECKFLAGS="-D__CHECK_ENDIAN__" + +这些检查默认都是被关闭的,因为他们通常会产生大量的警告。 -- cgit v1.2.3-59-g8ed1b From 463e526083fdaa284eaea45b53bb917ed3c72900 Mon Sep 17 00:00:00 2001 From: Zhang Le Date: Tue, 8 Jan 2008 00:59:16 +0800 Subject: Chinese: add translation of Codingstyle Signed-off-by: Zhang Le Signed-off-by: Li Yang Signed-off-by: Greg Kroah-Hartman --- Documentation/zh_CN/CodingStyle | 701 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 701 insertions(+) create mode 100644 Documentation/zh_CN/CodingStyle diff --git a/Documentation/zh_CN/CodingStyle b/Documentation/zh_CN/CodingStyle new file mode 100644 index 000000000000..ecd9307a641f --- /dev/null +++ b/Documentation/zh_CN/CodingStyle @@ -0,0 +1,701 @@ +Chinese translated version of Documentation/CodingStyle + +If you have any comment or update to the content, please post to LKML directly. +However, if you have problem communicating in English you can also ask the +Chinese maintainer for help. Contact the Chinese maintainer, if this +translation is outdated or there is problem with translation. + +Chinese maintainer: Zhang Le +--------------------------------------------------------------------- +Documentation/CodingStyle的中文翻译 + +如果想评论或更新本文的内容,请直接发信到LKML。如果你使用英文交流有困难的话,也可 +以向中文版维护者求助。如果本翻译更新不及时或者翻译存在问题,请联系中文版维护者。 + +中文版维护者: 张乐 Zhang Le +中文版翻译者: 张乐 Zhang Le +中文版校译者: 王聪 Wang Cong + wheelz + 管旭东 Xudong Guan + Li Zefan + Wang Chen +以下为正文 +--------------------------------------------------------------------- + + Linux内核代码风格 + +这是一个简短的文档,描述了linux内核的首选代码风格。代码风格是因人而异的,而且我 +不愿意把我的观点强加给任何人,不过这里所讲述的是我必须要维护的代码所遵守的风格, +并且我也希望绝大多数其他代码也能遵守这个风格。请在写代码时至少考虑一下本文所述的 +风格。 + +首先,我建议你打印一份GNU代码规范,然后不要读它。烧了它,这是一个具有重大象征性 +意义的动作。 + +不管怎样,现在我们开始: + + + 第一章:缩进 + +制表符是8个字符,所以缩进也是8个字符。有些异端运动试图将缩进变为4(乃至2)个字符 +深,这几乎相当于尝试将圆周率的值定义为3。 + +理由:缩进的全部意义就在于清楚的定义一个控制块起止于何处。尤其是当你盯着你的屏幕 +连续看了20小时之后,你将会发现大一点的缩进会使你更容易分辨缩进。 + +现在,有些人会抱怨8个字符的缩进会使代码向右边移动的太远,在80个字符的终端屏幕上 +就很难读这样的代码。这个问题的答案是,如果你需要3级以上的缩进,不管用何种方式你 +的代码已经有问题了,应该修正你的程序。 + +简而言之,8个字符的缩进可以让代码更容易阅读,还有一个好处是当你的函数嵌套太深的 +时候可以给你警告。留心这个警告。 + +在switch语句中消除多级缩进的首选的方式是让“switch”和从属于它的“case”标签对齐于同 +一列,而不要“两次缩进”“case”标签。比如: + + switch (suffix) { + case 'G': + case 'g': + mem <<= 30; + break; + case 'M': + case 'm': + mem <<= 20; + break; + case 'K': + case 'k': + mem <<= 10; + /* fall through */ + default: + break; + } + + +不要把多个语句放在一行里,除非你有什么东西要隐藏: + + if (condition) do_this; + do_something_everytime; + +也不要在一行里放多个赋值语句。内核代码风格超级简单。就是避免可能导致别人误读的表 +达式。 + +除了注释、文档和Kconfig之外,不要使用空格来缩进,前面的例子是例外,是有意为之。 + +选用一个好的编辑器,不要在行尾留空格。 + + + 第二章:把长的行和字符串打散 + +代码风格的意义就在于使用平常使用的工具来维持代码的可读性和可维护性。 + +每一行的长度的限制是80列,我们强烈建议您遵守这个惯例。 + +长于80列的语句要打散成有意义的片段。每个片段要明显短于原来的语句,而且放置的位置 +也明显的靠右。同样的规则也适用于有很长参数列表的函数头。长字符串也要打散成较短的 +字符串。唯一的例外是超过80列可以大幅度提高可读性并且不会隐藏信息的情况。 + +void fun(int a, int b, int c) +{ + if (condition) + printk(KERN_WARNING "Warning this is a long printk with " + "3 parameters a: %u b: %u " + "c: %u \n", a, b, c); + else + next_statement; +} + + 第三章:大括号和空格的放置 + +C语言风格中另外一个常见问题是大括号的放置。和缩进大小不同,选择或弃用某种放置策 +略并没有多少技术上的原因,不过首选的方式,就像Kernighan和Ritchie展示给我们的,是 +把起始大括号放在行尾,而把结束大括号放在行首,所以: + + if (x is true) { + we do y + } + +这适用于所有的非函数语句块(if、switch、for、while、do)。比如: + + switch (action) { + case KOBJ_ADD: + return "add"; + case KOBJ_REMOVE: + return "remove"; + case KOBJ_CHANGE: + return "change"; + default: + return NULL; + } + +不过,有一个例外,那就是函数:函数的起始大括号放置于下一行的开头,所以: + + int function(int x) + { + body of function + } + +全世界的异端可能会抱怨这个不一致性是……呃……不一致的,不过所有思维健全的人都知道( +a)K&R是_正确的_,并且(b)K&R是正确的。此外,不管怎样函数都是特殊的(在C语言中 +,函数是不能嵌套的)。 + +注意结束大括号独自占据一行,除非它后面跟着同一个语句的剩余部分,也就是do语句中的 +“while”或者if语句中的“else”,像这样: + + do { + body of do-loop + } while (condition); + +和 + + if (x == y) { + .. + } else if (x > y) { + ... + } else { + .... + } + +理由:K&R。 + +也请注意这种大括号的放置方式也能使空(或者差不多空的)行的数量最小化,同时不失可 +读性。因此,由于你的屏幕上的新行是不可再生资源(想想25行的终端屏幕),你将会有更 +多的空行来放置注释。 + +当只有一个单独的语句的时候,不用加不必要的大括号。 + +if (condition) + action(); + +这点不适用于本身为某个条件语句的一个分支的单独语句。这时需要在两个分支里都使用大 +括号。 + +if (condition) { + do_this(); + do_that(); +} else { + otherwise(); +} + + 3.1:空格 + +Linux内核的空格使用方式(主要)取决于它是用于函数还是关键字。(大多数)关键字后 +要加一个空格。值得注意的例外是sizeof、typeof、alignof和__attribute__,这些关键字 +某些程度上看起来更像函数(它们在Linux里也常常伴随小括号而使用,尽管在C语言里这样 +的小括号不是必需的,就像“struct fileinfo info”声明过后的“sizeof info”)。 + +所以在这些关键字之后放一个空格: + if, switch, case, for, do, while +但是不要在sizeof、typeof、alignof或者__attribute__这些关键字之后放空格。例如, + s = sizeof(struct file); + +不要在小括号里的表达式两侧加空格。这是一个反例: + + s = sizeof( struct file ); + +当声明指针类型或者返回指针类型的函数时,“*”的首选使用方式是使之靠近变量名或者函 +数名,而不是靠近类型名。例子: + + char *linux_banner; + unsigned long long memparse(char *ptr, char **retptr); + char *match_strdup(substring_t *s); + +在大多数二元和三元操作符两侧使用一个空格,例如下面所有这些操作符: + + = + - < > * / % | & ^ <= >= == != ? : + +但是一元操作符后不要加空格: + & * + - ~ ! sizeof typeof alignof __attribute__ defined + +后缀自加和自减一元操作符前不加空格: + ++ -- + +前缀自加和自减一元操作符后不加空格: + ++ -- + +“.”和“->”结构体成员操作符前后不加空格。 + +不要在行尾留空白。有些可以自动缩进的编辑器会在新行的行首加入适量的空白,然后你 +就可以直接在那一行输入代码。不过假如你最后没有在那一行输入代码,有些编辑器就不 +会移除已经加入的空白,就像你故意留下一个只有空白的行。包含行尾空白的行就这样产 +生了。 + +当git发现补丁包含了行尾空白的时候会警告你,并且可以应你的要求去掉行尾空白;不过 +如果你是正在打一系列补丁,这样做会导致后面的补丁失败,因为你改变了补丁的上下文。 + + + 第四章:命名 + +C是一个简朴的语言,你的命名也应该这样。和Modula-2和Pascal程序员不同,C程序员不使 +用类似ThisVariableIsATemporaryCounter这样华丽的名字。C程序员会称那个变量为“tmp” +,这样写起来会更容易,而且至少不会令其难于理解。 + +不过,虽然混用大小写的名字是不提倡使用的,但是全局变量还是需要一个具描述性的名字 +。称一个全局函数为“foo”是一个难以饶恕的错误。 + +全局变量(只有当你真正需要它们的时候再用它)需要有一个具描述性的名字,就像全局函 +数。如果你有一个可以计算活动用户数量的函数,你应该叫它“count_active_users()”或者 +类似的名字,你不应该叫它“cntuser()”。 + +在函数名中包含函数类型(所谓的匈牙利命名法)是脑子出了问题——编译器知道那些类型而 +且能够检查那些类型,这样做只能把程序员弄糊涂了。难怪微软总是制造出有问题的程序。 + +本地变量名应该简短,而且能够表达相关的含义。如果你有一些随机的整数型的循环计数器 +,它应该被称为“i”。叫它“loop_counter”并无益处,如果它没有被误解的可能的话。类似 +的,“tmp”可以用来称呼任意类型的临时变量。 + +如果你怕混淆了你的本地变量名,你就遇到另一个问题了,叫做函数增长荷尔蒙失衡综合症 +。请看第六章(函数)。 + + + 第五章:Typedef + +不要使用类似“vps_t”之类的东西。 + +对结构体和指针使用typedef是一个错误。当你在代码里看到: + + vps_t a; + +这代表什么意思呢? + +相反,如果是这样 + + struct virtual_container *a; + +你就知道“a”是什么了。 + +很多人认为typedef“能提高可读性”。实际不是这样的。它们只在下列情况下有用: + + (a) 完全不透明的对象(这种情况下要主动使用typedef来隐藏这个对象实际上是什么)。 + + 例如:“pte_t”等不透明对象,你只能用合适的访问函数来访问它们。 + + 注意!不透明性和“访问函数”本身是不好的。我们使用pte_t等类型的原因在于真的是 + 完全没有任何共用的可访问信息。 + + (b) 清楚的整数类型,如此,这层抽象就可以帮助消除到底是“int”还是“long”的混淆。 + + u8/u16/u32是完全没有问题的typedef,不过它们更符合类别(d)而不是这里。 + + 再次注意!要这样做,必须事出有因。如果某个变量是“unsigned long“,那么没有必要 + + typedef unsigned long myflags_t; + + 不过如果有一个明确的原因,比如它在某种情况下可能会是一个“unsigned int”而在 + 其他情况下可能为“unsigned long”,那么就不要犹豫,请务必使用typedef。 + + (c) 当你使用sparse按字面的创建一个新类型来做类型检查的时候。 + + (d) 和标准C99类型相同的类型,在某些例外的情况下。 + + 虽然让眼睛和脑筋来适应新的标准类型比如“uint32_t”不需要花很多时间,可是有些 + 人仍然拒绝使用它们。 + + 因此,Linux特有的等同于标准类型的“u8/u16/u32/u64”类型和它们的有符号类型是被 + 允许的——尽管在你自己的新代码中,它们不是强制要求要使用的。 + + 当编辑已经使用了某个类型集的已有代码时,你应该遵循那些代码中已经做出的选择。 + + (e) 可以在用户空间安全使用的类型。 + + 在某些用户空间可见的结构体里,我们不能要求C99类型而且不能用上面提到的“u32” + 类型。因此,我们在与用户空间共享的所有结构体中使用__u32和类似的类型。 + +可能还有其他的情况,不过基本的规则是永远不要使用typedef,除非你可以明确的应用上 +述某个规则中的一个。 + +总的来说,如果一个指针或者一个结构体里的元素可以合理的被直接访问到,那么它们就不 +应该是一个typedef。 + + + 第六章:函数 + +函数应该简短而漂亮,并且只完成一件事情。函数应该可以一屏或者两屏显示完(我们都知 +道ISO/ANSI屏幕大小是80x24),只做一件事情,而且把它做好。 + +一个函数的最大长度是和该函数的复杂度和缩进级数成反比的。所以,如果你有一个理论上 +很简单的只有一个很长(但是简单)的case语句的函数,而且你需要在每个case里做很多很 +小的事情,这样的函数尽管很长,但也是可以的。 + +不过,如果你有一个复杂的函数,而且你怀疑一个天分不是很高的高中一年级学生可能甚至 +搞不清楚这个函数的目的,你应该严格的遵守前面提到的长度限制。使用辅助函数,并为之 +取个具描述性的名字(如果你觉得它们的性能很重要的话,可以让编译器内联它们,这样的 +效果往往会比你写一个复杂函数的效果要好。) + +函数的另外一个衡量标准是本地变量的数量。此数量不应超过5-10个,否则你的函数就有 +问题了。重新考虑一下你的函数,把它分拆成更小的函数。人的大脑一般可以轻松的同时跟 +踪7个不同的事物,如果再增多的话,就会糊涂了。即便你聪颖过人,你也可能会记不清你2 +个星期前做过的事情。 + +在源文件里,使用空行隔开不同的函数。如果该函数需要被导出,它的EXPORT*宏应该紧贴 +在它的结束大括号之下。比如: + +int system_is_up(void) +{ + return system_state == SYSTEM_RUNNING; +} +EXPORT_SYMBOL(system_is_up); + +在函数原型中,包含函数名和它们的数据类型。虽然C语言里没有这样的要求,在Linux里这 +是提倡的做法,因为这样可以很简单的给读者提供更多的有价值的信息。 + + + 第七章:集中的函数退出途径 + +虽然被某些人声称已经过时,但是goto语句的等价物还是经常被编译器所使用,具体形式是 +无条件跳转指令。 + +当一个函数从多个位置退出并且需要做一些通用的清理工作的时候,goto的好处就显现出来 +了。 + +理由是: + +- 无条件语句容易理解和跟踪 +- 嵌套程度减小 +- 可以避免由于修改时忘记更新某个单独的退出点而导致的错误 +- 减轻了编译器的工作,无需删除冗余代码;) + +int fun(int a) +{ + int result = 0; + char *buffer = kmalloc(SIZE); + + if (buffer == NULL) + return -ENOMEM; + + if (condition1) { + while (loop1) { + ... + } + result = 1; + goto out; + } + ... +out: + kfree(buffer); + return result; +} + + 第八章:注释 + +注释是好的,不过有过度注释的危险。永远不要在注释里解释你的代码是如何运作的:更好 +的做法是让别人一看你的代码就可以明白,解释写的很差的代码是浪费时间。 + +一般的,你想要你的注释告诉别人你的代码做了什么,而不是怎么做的。也请你不要把注释 +放在一个函数体内部:如果函数复杂到你需要独立的注释其中的一部分,你很可能需要回到 +第六章看一看。你可以做一些小注释来注明或警告某些很聪明(或者槽糕)的做法,但不要 +加太多。你应该做的,是把注释放在函数的头部,告诉人们它做了什么,也可以加上它做这 +些事情的原因。 + +当注释内核API函数时,请使用kernel-doc格式。请看 +Documentation/kernel-doc-nano-HOWTO.txt和scripts/kernel-doc以获得详细信息。 + +Linux的注释风格是C89“/* ... */”风格。不要使用C99风格“// ...”注释。 + +长(多行)的首选注释风格是: + + /* + * This is the preferred style for multi-line + * comments in the Linux kernel source code. + * Please use it consistently. + * + * Description: A column of asterisks on the left side, + * with beginning and ending almost-blank lines. + */ + +注释数据也是很重要的,不管是基本类型还是衍生类型。为了方便实现这一点,每一行应只 +声明一个数据(不要使用逗号来一次声明多个数据)。这样你就有空间来为每个数据写一段 +小注释来解释它们的用途了。 + + + 第九章:你已经把事情弄糟了 + +这没什么,我们都是这样。可能你的使用了很长时间Unix的朋友已经告诉你“GNU emacs”能 +自动帮你格式化C源代码,而且你也注意到了,确实是这样,不过它所使用的默认值和我们 +想要的相去甚远(实际上,甚至比随机打的还要差——无数个猴子在GNU emacs里打字永远不 +会创造出一个好程序)(译注:请参考Infinite Monkey Theorem) + +所以你要么放弃GNU emacs,要么改变它让它使用更合理的设定。要采用后一个方案,你可 +以把下面这段粘贴到你的.emacs文件里。 + +(defun linux-c-mode () + "C mode with adjusted defaults for use with the Linux kernel." + (interactive) + (c-mode) + (c-set-style "K&R") + (setq tab-width 8) + (setq indent-tabs-mode t) + (setq c-basic-offset 8)) + +这样就定义了M-x linux-c-mode命令。当你hack一个模块的时候,如果你把字符串 +-*- linux-c -*-放在头两行的某个位置,这个模式将会被自动调用。如果你希望在你修改 +/usr/src/linux里的文件时魔术般自动打开linux-c-mode的话,你也可能需要添加 + +(setq auto-mode-alist (cons '("/usr/src/linux.*/.*\\.[ch]$" . linux-c-mode) + auto-mode-alist)) + +到你的.emacs文件里。 + +不过就算你尝试让emacs正确的格式化代码失败了,也并不意味着你失去了一切:还可以用“ +indent”。 + +不过,GNU indent也有和GNU emacs一样有问题的设定,所以你需要给它一些命令选项。不 +过,这还不算太糟糕,因为就算是GNU indent的作者也认同K&R的权威性(GNU的人并不是坏 +人,他们只是在这个问题上被严重的误导了),所以你只要给indent指定选项“-kr -i8” +(代表“K&R,8个字符缩进”),或者使用“scripts/Lindent”,这样就可以以最时髦的方式 +缩进源代码。 + +“indent”有很多选项,特别是重新格式化注释的时候,你可能需要看一下它的手册页。不过 +记住:“indent”不能修正坏的编程习惯。 + + + 第十章:Kconfig配置文件 + +对于遍布源码树的所有Kconfig*配置文件来说,它们缩进方式与C代码相比有所不同。紧挨 +在“config”定义下面的行缩进一个制表符,帮助信息则再多缩进2个空格。比如: + +config AUDIT + bool "Auditing support" + depends on NET + help + Enable auditing infrastructure that can be used with another + kernel subsystem, such as SELinux (which requires this for + logging of avc messages output). Does not do system-call + auditing without CONFIG_AUDITSYSCALL. + +仍然被认为不够稳定的功能应该被定义为依赖于“EXPERIMENTAL”: + +config SLUB + depends on EXPERIMENTAL && !ARCH_USES_SLAB_PAGE_STRUCT + bool "SLUB (Unqueued Allocator)" + ... + +而那些危险的功能(比如某些文件系统的写支持)应该在它们的提示字符串里显著的声明这 +一点: + +config ADFS_FS_RW + bool "ADFS write support (DANGEROUS)" + depends on ADFS_FS + ... + +要查看配置文件的完整文档,请看Documentation/kbuild/kconfig-language.txt。 + + + 第十一章:数据结构 + +如果一个数据结构,在创建和销毁它的单线执行环境之外可见,那么它必须要有一个引用计 +数器。内核里没有垃圾收集(并且内核之外的垃圾收集慢且效率低下),这意味着你绝对需 +要记录你对这种数据结构的使用情况。 + +引用计数意味着你能够避免上锁,并且允许多个用户并行访问这个数据结构——而不需要担心 +这个数据结构仅仅因为暂时不被使用就消失了,那些用户可能不过是沉睡了一阵或者做了一 +些其他事情而已。 + +注意上锁不能取代引用计数。上锁是为了保持数据结构的一致性,而引用计数是一个内存管 +理技巧。通常二者都需要,不要把两个搞混了。 + +很多数据结构实际上有2级引用计数,它们通常有不同“类”的用户。子类计数器统计子类用 +户的数量,每当子类计数器减至零时,全局计数器减一。 + +这种“多级引用计数”的例子可以在内存管理(“struct mm_struct”:mm_users和mm_count) +和文件系统(“struct super_block”:s_count和s_active)中找到。 + +记住:如果另一个执行线索可以找到你的数据结构,但是这个数据结构没有引用计数器,这 +里几乎肯定是一个bug。 + + + 第十二章:宏,枚举和RTL + +用于定义常量的宏的名字及枚举里的标签需要大写。 + +#define CONSTANT 0x12345 + +在定义几个相关的常量时,最好用枚举。 + +宏的名字请用大写字母,不过形如函数的宏的名字可以用小写字母。 + +一般的,如果能写成内联函数就不要写成像函数的宏。 + +含有多个语句的宏应该被包含在一个do-while代码块里: + +#define macrofun(a, b, c) \ + do { \ + if (a == 5) \ + do_this(b, c); \ + } while (0) + +使用宏的时候应避免的事情: + +1) 影响控制流程的宏: + +#define FOO(x) \ + do { \ + if (blah(x) < 0) \ + return -EBUGGERED; \ + } while(0) + +非常不好。它看起来像一个函数,不过却能导致“调用”它的函数退出;不要打乱读者大脑里 +的语法分析器。 + +2) 依赖于一个固定名字的本地变量的宏: + +#define FOO(val) bar(index, val) + +可能看起来像是个不错的东西,不过它非常容易把读代码的人搞糊涂,而且容易导致看起来 +不相关的改动带来错误。 + +3) 作为左值的带参数的宏: FOO(x) = y;如果有人把FOO变成一个内联函数的话,这种用 +法就会出错了。 + +4) 忘记了优先级:使用表达式定义常量的宏必须将表达式置于一对小括号之内。带参数的 +宏也要注意此类问题。 + +#define CONSTANT 0x4000 +#define CONSTEXP (CONSTANT | 3) + +cpp手册对宏的讲解很详细。Gcc internals手册也详细讲解了RTL(译注:register +transfer language),内核里的汇编语言经常用到它。 + + + 第十三章:打印内核消息 + +内核开发者应该是受过良好教育的。请一定注意内核信息的拼写,以给人以好的印象。不要 +用不规范的单词比如“dont”,而要用“do not”或者“don't”。保证这些信息简单、明了、无 +歧义。 + +内核信息不必以句号(译注:英文句号,即点)结束。 + +在小括号里打印数字(%d)没有任何价值,应该避免这样做。 + +里有一些驱动模型诊断宏,你应该使用它们,以确保信息对应于正确的 +设备和驱动,并且被标记了正确的消息级别。这些宏有:dev_err(), dev_warn(), +dev_info()等等。对于那些不和某个特定设备相关连的信息,定义了 +pr_debug()和pr_info()。 + +写出好的调试信息可以是一个很大的挑战;当你写出来之后,这些信息在远程除错的时候 +就会成为极大的帮助。当DEBUG符号没有被定义的时候,这些信息不应该被编译进内核里 +(也就是说,默认地,它们不应该被包含在内)。如果你使用dev_dbg()或者pr_debug(), +就能自动达到这个效果。很多子系统拥有Kconfig选项来启用-DDEBUG。还有一个相关的惯例 +是使用VERBOSE_DEBUG来添加dev_vdbg()消息到那些已经由DEBUG启用的消息之上。 + + + 第十四章:分配内存 + +内核提供了下面的一般用途的内存分配函数:kmalloc(),kzalloc(),kcalloc()和 +vmalloc()。请参考API文档以获取有关它们的详细信息。 + +传递结构体大小的首选形式是这样的: + + p = kmalloc(sizeof(*p), ...); + +另外一种传递方式中,sizeof的操作数是结构体的名字,这样会降低可读性,并且可能会引 +入bug。有可能指针变量类型被改变时,而对应的传递给内存分配函数的sizeof的结果不变。 + +强制转换一个void指针返回值是多余的。C语言本身保证了从void指针到其他任何指针类型 +的转换是没有问题的。 + + + 第十五章:内联弊病 + +有一个常见的误解是内联函数是gcc提供的可以让代码运行更快的一个选项。虽然使用内联 +函数有时候是恰当的(比如作为一种替代宏的方式,请看第十二章),不过很多情况下不是 +这样。inline关键字的过度使用会使内核变大,从而使整个系统运行速度变慢。因为大内核 +会占用更多的指令高速缓存(译注:一级缓存通常是指令缓存和数据缓存分开的)而且会导 +致pagecache的可用内存减少。想象一下,一次pagecache未命中就会导致一次磁盘寻址,将 +耗时5毫秒。5毫秒的时间内CPU能执行很多很多指令。 + +一个基本的原则是如果一个函数有3行以上,就不要把它变成内联函数。这个原则的一个例 +外是,如果你知道某个参数是一个编译时常量,而且因为这个常量你确定编译器在编译时能 +优化掉你的函数的大部分代码,那仍然可以给它加上inline关键字。kmalloc()内联函数就 +是一个很好的例子。 + +人们经常主张给static的而且只用了一次的函数加上inline,如此不会有任何损失,因为没 +有什么好权衡的。虽然从技术上说这是正确的,但是实际上这种情况下即使不加inline gcc +也可以自动使其内联。而且其他用户可能会要求移除inline,由此而来的争论会抵消inline +自身的潜在价值,得不偿失。 + + + 第十六章:函数返回值及命名 + +函数可以返回很多种不同类型的值,最常见的一种是表明函数执行成功或者失败的值。这样 +的一个值可以表示为一个错误代码整数(-Exxx=失败,0=成功)或者一个“成功”布尔值( +0=失败,非0=成功)。 + +混合使用这两种表达方式是难于发现的bug的来源。如果C语言本身严格区分整形和布尔型变 +量,那么编译器就能够帮我们发现这些错误……不过C语言不区分。为了避免产生这种bug,请 +遵循下面的惯例: + + 如果函数的名字是一个动作或者强制性的命令,那么这个函数应该返回错误代码整 + 数。如果是一个判断,那么函数应该返回一个“成功”布尔值。 + +比如,“add work”是一个命令,所以add_work()函数在成功时返回0,在失败时返回-EBUSY。 +类似的,因为“PCI device present”是一个判断,所以pci_dev_present()函数在成功找到 +一个匹配的设备时应该返回1,如果找不到时应该返回0。 + +所有导出(译注:EXPORT)的函数都必须遵守这个惯例,所有的公共函数也都应该如此。私 +有(static)函数不需要如此,但是我们也推荐这样做。 + +返回值是实际计算结果而不是计算是否成功的标志的函数不受此惯例的限制。一般的,他们 +通过返回一些正常值范围之外的结果来表示出错。典型的例子是返回指针的函数,他们使用 +NULL或者ERR_PTR机制来报告错误。 + + + 第十七章:不要重新发明内核宏 + +头文件include/linux/kernel.h包含了一些宏,你应该使用它们,而不要自己写一些它们的 +变种。比如,如果你需要计算一个数组的长度,使用这个宏 + + #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) + +类似的,如果你要计算某结构体成员的大小,使用 + + #define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f)) + +还有可以做严格的类型检查的min()和max()宏,如果你需要可以使用它们。你可以自己看看 +那个头文件里还定义了什么你可以拿来用的东西,如果有定义的话,你就不应在你的代码里 +自己重新定义。 + + + 第十八章:编辑器模式行和其他需要罗嗦的事情 + +有一些编辑器可以解释嵌入在源文件里的由一些特殊标记标明的配置信息。比如,emacs +能够解释被标记成这样的行: + +-*- mode: c -*- + +或者这样的: + +/* +Local Variables: +compile-command: "gcc -DMAGIC_DEBUG_FLAG foo.c" +End: +*/ + +Vim能够解释这样的标记: + +/* vim:set sw=8 noet */ + +不要在源代码中包含任何这样的内容。每个人都有他自己的编辑器配置,你的源文件不应 +该覆盖别人的配置。这包括有关缩进和模式配置的标记。人们可以使用他们自己定制的模 +式,或者使用其他可以产生正确的缩进的巧妙方法。 + + + + 附录 I:参考 + +The C Programming Language, 第二版, 作者Brian W. Kernighan和Denni +M. Ritchie. Prentice Hall, Inc., 1988. ISBN 0-13-110362-8 (软皮), +0-13-110370-9 (硬皮). URL: http://cm.bell-labs.com/cm/cs/cbook/ + +The Practice of Programming 作者Brian W. Kernighan和Rob Pike. Addison-Wesley, +Inc., 1999. ISBN 0-201-61586-X. URL: http://cm.bell-labs.com/cm/cs/tpop/ + +cpp,gcc,gcc internals和indent的GNU手册——和K&R及本文相符合的部分,全部可以在 +http://www.gnu.org/manual/找到 + +WG14是C语言的国际标准化工作组,URL: http://www.open-std.org/JTC1/SC22/WG14/ + +Kernel CodingStyle,作者greg@kroah.com发表于OLS 2002: +http://www.kroah.com/linux/talks/ols_2002_kernel_codingstyle_talk/html/ + +-- +最后更新于2007年7月13日。 -- cgit v1.2.3-59-g8ed1b From 9fd5b1c906a9b4b0efb24cb2b4d20c678ff26122 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 8 Jan 2008 18:11:24 +0100 Subject: sysfs: Fix a copy-n-paste typo in comment Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- fs/sysfs/dir.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c index f281cc6584b0..4948d9bc405d 100644 --- a/fs/sysfs/dir.c +++ b/fs/sysfs/dir.c @@ -440,7 +440,7 @@ int sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd) /** * sysfs_remove_one - remove sysfs_dirent from parent * @acxt: addrm context to use - * @sd: sysfs_dirent to be added + * @sd: sysfs_dirent to be removed * * Mark @sd removed and drop nlink of parent inode if @sd is a * directory. @sd is unlinked from the children list. -- cgit v1.2.3-59-g8ed1b From 20fd1e3bea554620d489f3542496639c1babe0b3 Mon Sep 17 00:00:00 2001 From: Frank Seidel Date: Fri, 9 Nov 2007 14:49:23 +0100 Subject: nozomi driver This is a driver to control the cardbus wireless data card that works on 3g networks. Greg Kroah-Hartman did the initial driver cleanup. Thanks to Arnaud Patard for help with bugfixing. Thanks to Alan Cox for a lot of tty fixes. Thanks to Satyam Sharma for fixing buildbreakage. Thanks to Frank Seidel for a lot of bugfixes and rewriting to make it a sane Linux driver Thanks to Jiri Slaby for a lot bugfixes, cleanups and rewrites that make it much more readable. Signed-off-by: Greg Kroah-Hartman Signed-off-by: Frank Seidel Signed-off-by: Jiri Slaby --- drivers/char/Kconfig | 10 + drivers/char/Makefile | 1 + drivers/char/nozomi.c | 1993 +++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 2004 insertions(+) create mode 100644 drivers/char/nozomi.c diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 2e3a0d4bc4c2..466629594776 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -373,6 +373,16 @@ config ISTALLION To compile this driver as a module, choose M here: the module will be called istallion. +config NOZOMI + tristate "HSDPA Broadband Wireless Data Card - Globe Trotter" + depends on PCI && EXPERIMENTAL + help + If you have a HSDPA driver Broadband Wireless Data Card - + Globe Trotter PCMCIA card, say Y here. + + To compile this driver as a module, choose M here, the module + will be called nozomi. + config A2232 tristate "Commodore A2232 serial support (EXPERIMENTAL)" depends on EXPERIMENTAL && ZORRO && BROKEN_ON_SMP diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 07304d50e0cb..96fc01eddefe 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_SERIAL167) += serial167.o obj-$(CONFIG_CYCLADES) += cyclades.o obj-$(CONFIG_STALLION) += stallion.o obj-$(CONFIG_ISTALLION) += istallion.o +obj-$(CONFIG_NOZOMI) += nozomi.o obj-$(CONFIG_DIGIEPCA) += epca.o obj-$(CONFIG_SPECIALIX) += specialix.o obj-$(CONFIG_MOXA_INTELLIO) += moxa.o diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c new file mode 100644 index 000000000000..6076e662886a --- /dev/null +++ b/drivers/char/nozomi.c @@ -0,0 +1,1993 @@ +/* + * nozomi.c -- HSDPA driver Broadband Wireless Data Card - Globe Trotter + * + * Written by: Ulf Jakobsson, + * Jan �erfeldt, + * Stefan Thomasson, + * + * Maintained by: Paul Hardwick (p.hardwick@option.com) + * + * Patches: + * Locking code changes for Vodafone by Sphere Systems Ltd, + * Andrew Bird (ajb@spheresystems.co.uk ) + * & Phil Sanderson + * + * Source has been ported from an implementation made by Filip Aben @ Option + * + * -------------------------------------------------------------------------- + * + * Copyright (c) 2005,2006 Option Wireless Sweden AB + * Copyright (c) 2006 Sphere Systems Ltd + * Copyright (c) 2006 Option Wireless n/v + * All rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * -------------------------------------------------------------------------- + */ + +/* + * CHANGELOG + * Version 2.1d + * 11-November-2007 Jiri Slaby, Frank Seidel + * - Big rework of multicard support by Jiri + * - Major cleanups (semaphore to mutex, endianess, no major reservation) + * - Optimizations + * + * Version 2.1c + * 30-October-2007 Frank Seidel + * - Completed multicard support + * - Minor cleanups + * + * Version 2.1b + * 07-August-2007 Frank Seidel + * - Minor cleanups + * - theoretical multicard support + * + * Version 2.1 + * 03-July-2006 Paul Hardwick + * + * - Stability Improvements. Incorporated spinlock wraps patch. + * - Updated for newer 2.6.14+ kernels (tty_buffer_request_room) + * - using __devexit macro for tty + * + * + * Version 2.0 + * 08-feb-2006 15:34:10:Ulf + * + * -Fixed issue when not waking up line disipine layer, could probably result + * in better uplink performance for 2.4. + * + * -Fixed issue with big endian during initalization, now proper toggle flags + * are handled between preloader and maincode. + * + * -Fixed flow control issue. + * + * -Added support for setting DTR. + * + * -For 2.4 kernels, removing temporary buffer that's not needed. + * + * -Reading CTS only for modem port (only port that supports it). + * + * -Return 0 in write_room instead of netative value, it's not handled in + * upper layer. + * + * -------------------------------------------------------------------------- + * Version 1.0 + * + * First version of driver, only tested with card of type F32_2. + * Works fine with 2.4 and 2.6 kernels. + * Driver also support big endian architecture. + */ + +/* Enable this to have a lot of debug printouts */ +#define DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + + +#define VERSION_STRING DRIVER_DESC " 2.1d (build date: " \ + __DATE__ " " __TIME__ ")" + +/* Macros definitions */ + +/* Default debug printout level */ +#define NOZOMI_DEBUG_LEVEL 0x00 + +#define P_BUF_SIZE 128 +#define NFO(_err_flag_, args...) \ +do { \ + char tmp[P_BUF_SIZE]; \ + snprintf(tmp, sizeof(tmp), ##args); \ + printk(_err_flag_ "[%d] %s(): %s\n", __LINE__, \ + __FUNCTION__, tmp); \ +} while (0) + +#define DBG1(args...) D_(0x01, ##args) +#define DBG2(args...) D_(0x02, ##args) +#define DBG3(args...) D_(0x04, ##args) +#define DBG4(args...) D_(0x08, ##args) +#define DBG5(args...) D_(0x10, ##args) +#define DBG6(args...) D_(0x20, ##args) +#define DBG7(args...) D_(0x40, ##args) +#define DBG8(args...) D_(0x80, ##args) + +#ifdef DEBUG +/* Do we need this settable at runtime? */ +static int debug = NOZOMI_DEBUG_LEVEL; + +#define D(lvl, args...) do {if (lvl & debug) NFO(KERN_DEBUG, ##args); } \ + while (0) +#define D_(lvl, args...) D(lvl, ##args) + +/* These printouts are always printed */ + +#else +static int debug; +#define D_(lvl, args...) +#endif + +/* TODO: rewrite to optimize macros... */ + +#define TMP_BUF_MAX 256 + +#define DUMP(buf__,len__) \ + do { \ + char tbuf[TMP_BUF_MAX] = {0};\ + if (len__ > 1) {\ + snprintf(tbuf, len__ > TMP_BUF_MAX ? TMP_BUF_MAX : len__, "%s", buf__);\ + if (tbuf[len__-2] == '\r') {\ + tbuf[len__-2] = 'r';\ + } \ + DBG1("SENDING: '%s' (%d+n)", tbuf, len__);\ + } else {\ + DBG1("SENDING: '%s' (%d)", tbuf, len__);\ + } \ +} while (0) + +/* Defines */ +#define NOZOMI_NAME "nozomi" +#define NOZOMI_NAME_TTY "nozomi_tty" +#define DRIVER_DESC "Nozomi driver" + +#define NTTY_TTY_MAXMINORS 256 +#define NTTY_FIFO_BUFFER_SIZE 8192 + +/* Must be power of 2 */ +#define FIFO_BUFFER_SIZE_UL 8192 + +/* Size of tmp send buffer to card */ +#define SEND_BUF_MAX 1024 +#define RECEIVE_BUF_MAX 4 + + +/* Define all types of vendors and devices to support */ +#define VENDOR1 0x1931 /* Vendor Option */ +#define DEVICE1 0x000c /* HSDPA card */ + +#define R_IIR 0x0000 /* Interrupt Identity Register */ +#define R_FCR 0x0000 /* Flow Control Register */ +#define R_IER 0x0004 /* Interrupt Enable Register */ + +#define CONFIG_MAGIC 0xEFEFFEFE +#define TOGGLE_VALID 0x0000 + +/* Definition of interrupt tokens */ +#define MDM_DL1 0x0001 +#define MDM_UL1 0x0002 +#define MDM_DL2 0x0004 +#define MDM_UL2 0x0008 +#define DIAG_DL1 0x0010 +#define DIAG_DL2 0x0020 +#define DIAG_UL 0x0040 +#define APP1_DL 0x0080 +#define APP1_UL 0x0100 +#define APP2_DL 0x0200 +#define APP2_UL 0x0400 +#define CTRL_DL 0x0800 +#define CTRL_UL 0x1000 +#define RESET 0x8000 + +#define MDM_DL (MDM_DL1 | MDM_DL2) +#define MDM_UL (MDM_UL1 | MDM_UL2) +#define DIAG_DL (DIAG_DL1 | DIAG_DL2) + +/* modem signal definition */ +#define CTRL_DSR 0x0001 +#define CTRL_DCD 0x0002 +#define CTRL_RI 0x0004 +#define CTRL_CTS 0x0008 + +#define CTRL_DTR 0x0001 +#define CTRL_RTS 0x0002 + +#define MAX_PORT 4 +#define NOZOMI_MAX_PORTS 5 +#define NOZOMI_MAX_CARDS (NTTY_TTY_MAXMINORS / MAX_PORT) + +/* Type definitions */ + +/* + * There are two types of nozomi cards, + * one with 2048 memory and with 8192 memory + */ +enum card_type { + F32_2 = 2048, /* 512 bytes downlink + uplink * 2 -> 2048 */ + F32_8 = 8192, /* 3072 bytes downl. + 1024 bytes uplink * 2 -> 8192 */ +}; + +/* Two different toggle channels exist */ +enum channel_type { + CH_A = 0, + CH_B = 1, +}; + +/* Port definition for the card regarding flow control */ +enum ctrl_port_type { + CTRL_CMD = 0, + CTRL_MDM = 1, + CTRL_DIAG = 2, + CTRL_APP1 = 3, + CTRL_APP2 = 4, + CTRL_ERROR = -1, +}; + +/* Ports that the nozomi has */ +enum port_type { + PORT_MDM = 0, + PORT_DIAG = 1, + PORT_APP1 = 2, + PORT_APP2 = 3, + PORT_CTRL = 4, + PORT_ERROR = -1, +}; + +#ifdef __BIG_ENDIAN +/* Big endian */ + +struct toggles { + unsigned enabled:5; /* + * Toggle fields are valid if enabled is 0, + * else A-channels must always be used. + */ + unsigned diag_dl:1; + unsigned mdm_dl:1; + unsigned mdm_ul:1; +} __attribute__ ((packed)); + +/* Configuration table to read at startup of card */ +/* Is for now only needed during initialization phase */ +struct config_table { + u32 signature; + u16 product_information; + u16 version; + u8 pad3[3]; + struct toggles toggle; + u8 pad1[4]; + u16 dl_mdm_len1; /* + * If this is 64, it can hold + * 60 bytes + 4 that is length field + */ + u16 dl_start; + + u16 dl_diag_len1; + u16 dl_mdm_len2; /* + * If this is 64, it can hold + * 60 bytes + 4 that is length field + */ + u16 dl_app1_len; + + u16 dl_diag_len2; + u16 dl_ctrl_len; + u16 dl_app2_len; + u8 pad2[16]; + u16 ul_mdm_len1; + u16 ul_start; + u16 ul_diag_len; + u16 ul_mdm_len2; + u16 ul_app1_len; + u16 ul_app2_len; + u16 ul_ctrl_len; +} __attribute__ ((packed)); + +/* This stores all control downlink flags */ +struct ctrl_dl { + u8 port; + unsigned reserved:4; + unsigned CTS:1; + unsigned RI:1; + unsigned DCD:1; + unsigned DSR:1; +} __attribute__ ((packed)); + +/* This stores all control uplink flags */ +struct ctrl_ul { + u8 port; + unsigned reserved:6; + unsigned RTS:1; + unsigned DTR:1; +} __attribute__ ((packed)); + +#else +/* Little endian */ + +/* This represents the toggle information */ +struct toggles { + unsigned mdm_ul:1; + unsigned mdm_dl:1; + unsigned diag_dl:1; + unsigned enabled:5; /* + * Toggle fields are valid if enabled is 0, + * else A-channels must always be used. + */ +} __attribute__ ((packed)); + +/* Configuration table to read at startup of card */ +struct config_table { + u32 signature; + u16 version; + u16 product_information; + struct toggles toggle; + u8 pad1[7]; + u16 dl_start; + u16 dl_mdm_len1; /* + * If this is 64, it can hold + * 60 bytes + 4 that is length field + */ + u16 dl_mdm_len2; + u16 dl_diag_len1; + u16 dl_diag_len2; + u16 dl_app1_len; + u16 dl_app2_len; + u16 dl_ctrl_len; + u8 pad2[16]; + u16 ul_start; + u16 ul_mdm_len2; + u16 ul_mdm_len1; + u16 ul_diag_len; + u16 ul_app1_len; + u16 ul_app2_len; + u16 ul_ctrl_len; +} __attribute__ ((packed)); + +/* This stores all control downlink flags */ +struct ctrl_dl { + unsigned DSR:1; + unsigned DCD:1; + unsigned RI:1; + unsigned CTS:1; + unsigned reserverd:4; + u8 port; +} __attribute__ ((packed)); + +/* This stores all control uplink flags */ +struct ctrl_ul { + unsigned DTR:1; + unsigned RTS:1; + unsigned reserved:6; + u8 port; +} __attribute__ ((packed)); +#endif + +/* This holds all information that is needed regarding a port */ +struct port { + u8 update_flow_control; + struct ctrl_ul ctrl_ul; + struct ctrl_dl ctrl_dl; + struct kfifo *fifo_ul; + void __iomem *dl_addr[2]; + u32 dl_size[2]; + u8 toggle_dl; + void __iomem *ul_addr[2]; + u32 ul_size[2]; + u8 toggle_ul; + u16 token_dl; + + struct tty_struct *tty; + int tty_open_count; + /* mutex to ensure one access patch to this port */ + struct mutex tty_sem; + wait_queue_head_t tty_wait; + struct async_icount tty_icount; +}; + +/* Private data one for each card in the system */ +struct nozomi { + void __iomem *base_addr; + unsigned long flip; + + /* Pointers to registers */ + void __iomem *reg_iir; + void __iomem *reg_fcr; + void __iomem *reg_ier; + + u16 last_ier; + enum card_type card_type; + struct config_table config_table; /* Configuration table */ + struct pci_dev *pdev; + struct port port[NOZOMI_MAX_PORTS]; + u8 *send_buf; + + spinlock_t spin_mutex; /* secures access to registers and tty */ + + unsigned int index_start; + u32 open_ttys; +}; + +/* This is a data packet that is read or written to/from card */ +struct buffer { + u32 size; /* size is the length of the data buffer */ + u8 *data; +} __attribute__ ((packed)); + +/* Global variables */ +static struct pci_device_id nozomi_pci_tbl[] = { + {PCI_DEVICE(VENDOR1, DEVICE1)}, + {}, +}; + +MODULE_DEVICE_TABLE(pci, nozomi_pci_tbl); + +static struct nozomi *ndevs[NOZOMI_MAX_CARDS]; +static struct tty_driver *ntty_driver; + +/* + * find card by tty_index + */ +static inline struct nozomi *get_dc_by_tty(const struct tty_struct *tty) +{ + return tty ? ndevs[tty->index / MAX_PORT] : NULL; +} + +static inline struct port *get_port_by_tty(const struct tty_struct *tty) +{ + struct nozomi *ndev = get_dc_by_tty(tty); + return ndev ? &ndev->port[tty->index % MAX_PORT] : NULL; +} + +/* + * TODO: + * -Optimize + * -Rewrite cleaner + */ + +static void read_mem32(u32 *buf, const void __iomem *mem_addr_start, + u32 size_bytes) +{ + u32 i = 0; + const u32 *ptr = (__force u32 *) mem_addr_start; + u16 *buf16; + + if (unlikely(!ptr || !buf)) + goto out; + + /* shortcut for extremely often used cases */ + switch (size_bytes) { + case 2: /* 2 bytes */ + buf16 = (u16 *) buf; + *buf16 = __le16_to_cpu(readw((void __iomem *)ptr)); + goto out; + break; + case 4: /* 4 bytes */ + *(buf) = __le32_to_cpu(readl((void __iomem *)ptr)); + goto out; + break; + } + + while (i < size_bytes) { + if (size_bytes - i == 2) { + /* Handle 2 bytes in the end */ + buf16 = (u16 *) buf; + *(buf16) = __le16_to_cpu(readw((void __iomem *)ptr)); + i += 2; + } else { + /* Read 4 bytes */ + *(buf) = __le32_to_cpu(readl((void __iomem *)ptr)); + i += 4; + } + buf++; + ptr++; + } +out: + return; +} + +/* + * TODO: + * -Optimize + * -Rewrite cleaner + */ +static u32 write_mem32(void __iomem *mem_addr_start, u32 *buf, + u32 size_bytes) +{ + u32 i = 0; + u32 *ptr = (__force u32 *) mem_addr_start; + u16 *buf16; + + if (unlikely(!ptr || !buf)) + return 0; + + /* shortcut for extremely often used cases */ + switch (size_bytes) { + case 2: /* 2 bytes */ + buf16 = (u16 *) buf; + writew(__cpu_to_le16(*buf16), (void __iomem *)ptr); + return 2; + break; + case 1: /* + * also needs to write 4 bytes in this case + * so falling through.. + */ + case 4: /* 4 bytes */ + writel(__cpu_to_le32(*buf), (void __iomem *)ptr); + return 4; + break; + } + + while (i < size_bytes) { + if (size_bytes - i == 2) { + /* 2 bytes */ + buf16 = (u16 *) buf; + writew(__cpu_to_le16(*buf16), (void __iomem *)ptr); + i += 2; + } else { + /* 4 bytes */ + writel(__cpu_to_le32(*buf), (void __iomem *)ptr); + i += 4; + } + buf++; + ptr++; + } + return i; +} + +/* Setup pointers to different channels and also setup buffer sizes. */ +static void setup_memory(struct nozomi *dc) +{ + void __iomem *offset = dc->base_addr + dc->config_table.dl_start; + /* The length reported is including the length field of 4 bytes, + * hence subtract with 4. + */ + const u16 buff_offset = 4; + + /* Modem port dl configuration */ + dc->port[PORT_MDM].dl_addr[CH_A] = offset; + dc->port[PORT_MDM].dl_addr[CH_B] = + (offset += dc->config_table.dl_mdm_len1); + dc->port[PORT_MDM].dl_size[CH_A] = + dc->config_table.dl_mdm_len1 - buff_offset; + dc->port[PORT_MDM].dl_size[CH_B] = + dc->config_table.dl_mdm_len2 - buff_offset; + + /* Diag port dl configuration */ + dc->port[PORT_DIAG].dl_addr[CH_A] = + (offset += dc->config_table.dl_mdm_len2); + dc->port[PORT_DIAG].dl_size[CH_A] = + dc->config_table.dl_diag_len1 - buff_offset; + dc->port[PORT_DIAG].dl_addr[CH_B] = + (offset += dc->config_table.dl_diag_len1); + dc->port[PORT_DIAG].dl_size[CH_B] = + dc->config_table.dl_diag_len2 - buff_offset; + + /* App1 port dl configuration */ + dc->port[PORT_APP1].dl_addr[CH_A] = + (offset += dc->config_table.dl_diag_len2); + dc->port[PORT_APP1].dl_size[CH_A] = + dc->config_table.dl_app1_len - buff_offset; + + /* App2 port dl configuration */ + dc->port[PORT_APP2].dl_addr[CH_A] = + (offset += dc->config_table.dl_app1_len); + dc->port[PORT_APP2].dl_size[CH_A] = + dc->config_table.dl_app2_len - buff_offset; + + /* Ctrl dl configuration */ + dc->port[PORT_CTRL].dl_addr[CH_A] = + (offset += dc->config_table.dl_app2_len); + dc->port[PORT_CTRL].dl_size[CH_A] = + dc->config_table.dl_ctrl_len - buff_offset; + + offset = dc->base_addr + dc->config_table.ul_start; + + /* Modem Port ul configuration */ + dc->port[PORT_MDM].ul_addr[CH_A] = offset; + dc->port[PORT_MDM].ul_size[CH_A] = + dc->config_table.ul_mdm_len1 - buff_offset; + dc->port[PORT_MDM].ul_addr[CH_B] = + (offset += dc->config_table.ul_mdm_len1); + dc->port[PORT_MDM].ul_size[CH_B] = + dc->config_table.ul_mdm_len2 - buff_offset; + + /* Diag port ul configuration */ + dc->port[PORT_DIAG].ul_addr[CH_A] = + (offset += dc->config_table.ul_mdm_len2); + dc->port[PORT_DIAG].ul_size[CH_A] = + dc->config_table.ul_diag_len - buff_offset; + + /* App1 port ul configuration */ + dc->port[PORT_APP1].ul_addr[CH_A] = + (offset += dc->config_table.ul_diag_len); + dc->port[PORT_APP1].ul_size[CH_A] = + dc->config_table.ul_app1_len - buff_offset; + + /* App2 port ul configuration */ + dc->port[PORT_APP2].ul_addr[CH_A] = + (offset += dc->config_table.ul_app1_len); + dc->port[PORT_APP2].ul_size[CH_A] = + dc->config_table.ul_app2_len - buff_offset; + + /* Ctrl ul configuration */ + dc->port[PORT_CTRL].ul_addr[CH_A] = + (offset += dc->config_table.ul_app2_len); + dc->port[PORT_CTRL].ul_size[CH_A] = + dc->config_table.ul_ctrl_len - buff_offset; +} + +/* Dump config table under initalization phase */ +#ifdef DEBUG +static void dump_table(const struct nozomi *dc) +{ + DBG3("signature: 0x%08X", dc->config_table.signature); + DBG3("version: 0x%04X", dc->config_table.version); + DBG3("product_information: 0x%04X", \ + dc->config_table.product_information); + DBG3("toggle enabled: %d", dc->config_table.toggle.enabled); + DBG3("toggle up_mdm: %d", dc->config_table.toggle.mdm_ul); + DBG3("toggle dl_mdm: %d", dc->config_table.toggle.mdm_dl); + DBG3("toggle dl_dbg: %d", dc->config_table.toggle.diag_dl); + + DBG3("dl_start: 0x%04X", dc->config_table.dl_start); + DBG3("dl_mdm_len0: 0x%04X, %d", dc->config_table.dl_mdm_len1, + dc->config_table.dl_mdm_len1); + DBG3("dl_mdm_len1: 0x%04X, %d", dc->config_table.dl_mdm_len2, + dc->config_table.dl_mdm_len2); + DBG3("dl_diag_len0: 0x%04X, %d", dc->config_table.dl_diag_len1, + dc->config_table.dl_diag_len1); + DBG3("dl_diag_len1: 0x%04X, %d", dc->config_table.dl_diag_len2, + dc->config_table.dl_diag_len2); + DBG3("dl_app1_len: 0x%04X, %d", dc->config_table.dl_app1_len, + dc->config_table.dl_app1_len); + DBG3("dl_app2_len: 0x%04X, %d", dc->config_table.dl_app2_len, + dc->config_table.dl_app2_len); + DBG3("dl_ctrl_len: 0x%04X, %d", dc->config_table.dl_ctrl_len, + dc->config_table.dl_ctrl_len); + DBG3("ul_start: 0x%04X, %d", dc->config_table.ul_start, + dc->config_table.ul_start); + DBG3("ul_mdm_len[0]: 0x%04X, %d", dc->config_table.ul_mdm_len1, + dc->config_table.ul_mdm_len1); + DBG3("ul_mdm_len[1]: 0x%04X, %d", dc->config_table.ul_mdm_len2, + dc->config_table.ul_mdm_len2); + DBG3("ul_diag_len: 0x%04X, %d", dc->config_table.ul_diag_len, + dc->config_table.ul_diag_len); + DBG3("ul_app1_len: 0x%04X, %d", dc->config_table.ul_app1_len, + dc->config_table.ul_app1_len); + DBG3("ul_app2_len: 0x%04X, %d", dc->config_table.ul_app2_len, + dc->config_table.ul_app2_len); + DBG3("ul_ctrl_len: 0x%04X, %d", dc->config_table.ul_ctrl_len, + dc->config_table.ul_ctrl_len); +} +#else +static __inline__ void dump_table(const struct nozomi *dc) { } +#endif + +/* + * Read configuration table from card under intalization phase + * Returns 1 if ok, else 0 + */ +static int nozomi_read_config_table(struct nozomi *dc) +{ + read_mem32((u32 *) &dc->config_table, dc->base_addr + 0, + sizeof(struct config_table)); + + if (dc->config_table.signature != CONFIG_MAGIC) { + dev_err(&dc->pdev->dev, "ConfigTable Bad! 0x%08X != 0x%08X\n", + dc->config_table.signature, CONFIG_MAGIC); + return 0; + } + + if ((dc->config_table.version == 0) + || (dc->config_table.toggle.enabled == TOGGLE_VALID)) { + int i; + DBG1("Second phase, configuring card"); + + setup_memory(dc); + + dc->port[PORT_MDM].toggle_ul = dc->config_table.toggle.mdm_ul; + dc->port[PORT_MDM].toggle_dl = dc->config_table.toggle.mdm_dl; + dc->port[PORT_DIAG].toggle_dl = dc->config_table.toggle.diag_dl; + DBG1("toggle ports: MDM UL:%d MDM DL:%d, DIAG DL:%d", + dc->port[PORT_MDM].toggle_ul, + dc->port[PORT_MDM].toggle_dl, dc->port[PORT_DIAG].toggle_dl); + + dump_table(dc); + + for (i = PORT_MDM; i < MAX_PORT; i++) { + dc->port[i].fifo_ul = + kfifo_alloc(FIFO_BUFFER_SIZE_UL, GFP_ATOMIC, NULL); + memset(&dc->port[i].ctrl_dl, 0, sizeof(struct ctrl_dl)); + memset(&dc->port[i].ctrl_ul, 0, sizeof(struct ctrl_ul)); + } + + /* Enable control channel */ + dc->last_ier = dc->last_ier | CTRL_DL; + writew(dc->last_ier, dc->reg_ier); + + dev_info(&dc->pdev->dev, "Initialization OK!\n"); + return 1; + } + + if ((dc->config_table.version > 0) + && (dc->config_table.toggle.enabled != TOGGLE_VALID)) { + u32 offset = 0; + DBG1("First phase: pushing upload buffers, clearing download"); + + dev_info(&dc->pdev->dev, "Version of card: %d\n", + dc->config_table.version); + + /* Here we should disable all I/O over F32. */ + setup_memory(dc); + + /* + * We should send ALL channel pair tokens back along + * with reset token + */ + + /* push upload modem buffers */ + write_mem32(dc->port[PORT_MDM].ul_addr[CH_A], + (u32 *) &offset, 4); + write_mem32(dc->port[PORT_MDM].ul_addr[CH_B], + (u32 *) &offset, 4); + + writew(MDM_UL | DIAG_DL | MDM_DL, dc->reg_fcr); + + DBG1("First phase done"); + } + + return 1; +} + +/* Enable uplink interrupts */ +static void enable_transmit_ul(enum port_type port, struct nozomi *dc) +{ + u16 mask[NOZOMI_MAX_PORTS] = \ + {MDM_UL, DIAG_UL, APP1_UL, APP2_UL, CTRL_UL}; + + if (port < NOZOMI_MAX_PORTS) { + dc->last_ier |= mask[port]; + writew(dc->last_ier, dc->reg_ier); + } else { + dev_err(&dc->pdev->dev, "Called with wrong port?\n"); + } +} + +/* Disable uplink interrupts */ +static void disable_transmit_ul(enum port_type port, struct nozomi *dc) +{ + u16 mask[NOZOMI_MAX_PORTS] = \ + {~MDM_UL, ~DIAG_UL, ~APP1_UL, ~APP2_UL, ~CTRL_UL}; + + if (port < NOZOMI_MAX_PORTS) { + dc->last_ier &= mask[port]; + writew(dc->last_ier, dc->reg_ier); + } else { + dev_err(&dc->pdev->dev, "Called with wrong port?\n"); + } +} + +/* Enable downlink interrupts */ +static void enable_transmit_dl(enum port_type port, struct nozomi *dc) +{ + u16 mask[NOZOMI_MAX_PORTS] = \ + {MDM_DL, DIAG_DL, APP1_DL, APP2_DL, CTRL_DL}; + + if (port < NOZOMI_MAX_PORTS) { + dc->last_ier |= mask[port]; + writew(dc->last_ier, dc->reg_ier); + } else { + dev_err(&dc->pdev->dev, "Called with wrong port?\n"); + } +} + +/* Disable downlink interrupts */ +static void disable_transmit_dl(enum port_type port, struct nozomi *dc) +{ + u16 mask[NOZOMI_MAX_PORTS] = \ + {~MDM_DL, ~DIAG_DL, ~APP1_DL, ~APP2_DL, ~CTRL_DL}; + + if (port < NOZOMI_MAX_PORTS) { + dc->last_ier &= mask[port]; + writew(dc->last_ier, dc->reg_ier); + } else { + dev_err(&dc->pdev->dev, "Called with wrong port?\n"); + } +} + +/* + * Return 1 - send buffer to card and ack. + * Return 0 - don't ack, don't send buffer to card. + */ +static int send_data(enum port_type index, struct nozomi *dc) +{ + u32 size = 0; + struct port *port = &dc->port[index]; + u8 toggle = port->toggle_ul; + void __iomem *addr = port->ul_addr[toggle]; + u32 ul_size = port->ul_size[toggle]; + struct tty_struct *tty = port->tty; + + /* Get data from tty and place in buf for now */ + size = __kfifo_get(port->fifo_ul, dc->send_buf, + ul_size < SEND_BUF_MAX ? ul_size : SEND_BUF_MAX); + + if (size == 0) { + DBG4("No more data to send, disable link:"); + return 0; + } + + /* DUMP(buf, size); */ + + /* Write length + data */ + write_mem32(addr, (u32 *) &size, 4); + write_mem32(addr + 4, (u32 *) dc->send_buf, size); + + if (tty) + tty_wakeup(tty); + + return 1; +} + +/* If all data has been read, return 1, else 0 */ +static int receive_data(enum port_type index, struct nozomi *dc) +{ + u8 buf[RECEIVE_BUF_MAX] = { 0 }; + int size; + u32 offset = 4; + struct port *port = &dc->port[index]; + void __iomem *addr = port->dl_addr[port->toggle_dl]; + struct tty_struct *tty = port->tty; + int i; + + if (unlikely(!tty)) { + DBG1("tty not open for port: %d?", index); + return 1; + } + + read_mem32((u32 *) &size, addr, 4); + /* DBG1( "%d bytes port: %d", size, index); */ + + if (test_bit(TTY_THROTTLED, &tty->flags)) { + DBG1("No room in tty, don't read data, don't ack interrupt, " + "disable interrupt"); + + /* disable interrupt in downlink... */ + disable_transmit_dl(index, dc); + return 0; + } + + if (unlikely(size == 0)) { + dev_err(&dc->pdev->dev, "size == 0?\n"); + return 1; + } + + tty_buffer_request_room(tty, size); + + while (size > 0) { + read_mem32((u32 *) buf, addr + offset, RECEIVE_BUF_MAX); + + if (size == 1) { + tty_insert_flip_char(tty, buf[0], TTY_NORMAL); + size = 0; + } else if (size < RECEIVE_BUF_MAX) { + size -= tty_insert_flip_string(tty, (char *) buf, size); + } else { + i = tty_insert_flip_string(tty, \ + (char *) buf, RECEIVE_BUF_MAX); + size -= i; + offset += i; + } + } + + set_bit(index, &dc->flip); + + return 1; +} + +/* Debug for interrupts */ +#ifdef DEBUG +static char *interrupt2str(u16 interrupt) +{ + static char buf[TMP_BUF_MAX]; + char *p = buf; + + interrupt & MDM_DL1 ? p += snprintf(p, TMP_BUF_MAX, "MDM_DL1 ") : NULL; + interrupt & MDM_DL2 ? p += snprintf(p, TMP_BUF_MAX - (p - buf), + "MDM_DL2 ") : NULL; + + interrupt & MDM_UL1 ? p += snprintf(p, TMP_BUF_MAX - (p - buf), + "MDM_UL1 ") : NULL; + interrupt & MDM_UL2 ? p += snprintf(p, TMP_BUF_MAX - (p - buf), + "MDM_UL2 ") : NULL; + + interrupt & DIAG_DL1 ? p += snprintf(p, TMP_BUF_MAX - (p - buf), + "DIAG_DL1 ") : NULL; + interrupt & DIAG_DL2 ? p += snprintf(p, TMP_BUF_MAX - (p - buf), + "DIAG_DL2 ") : NULL; + + interrupt & DIAG_UL ? p += snprintf(p, TMP_BUF_MAX - (p - buf), + "DIAG_UL ") : NULL; + + interrupt & APP1_DL ? p += snprintf(p, TMP_BUF_MAX - (p - buf), + "APP1_DL ") : NULL; + interrupt & APP2_DL ? p += snprintf(p, TMP_BUF_MAX - (p - buf), + "APP2_DL ") : NULL; + + interrupt & APP1_UL ? p += snprintf(p, TMP_BUF_MAX - (p - buf), + "APP1_UL ") : NULL; + interrupt & APP2_UL ? p += snprintf(p, TMP_BUF_MAX - (p - buf), + "APP2_UL ") : NULL; + + interrupt & CTRL_DL ? p += snprintf(p, TMP_BUF_MAX - (p - buf), + "CTRL_DL ") : NULL; + interrupt & CTRL_UL ? p += snprintf(p, TMP_BUF_MAX - (p - buf), + "CTRL_UL ") : NULL; + + interrupt & RESET ? p += snprintf(p, TMP_BUF_MAX - (p - buf), + "RESET ") : NULL; + + return buf; +} +#endif + +/* + * Receive flow control + * Return 1 - If ok, else 0 + */ +static int receive_flow_control(struct nozomi *dc) +{ + enum port_type port = PORT_MDM; + struct ctrl_dl ctrl_dl; + struct ctrl_dl old_ctrl; + u16 enable_ier = 0; + + read_mem32((u32 *) &ctrl_dl, dc->port[PORT_CTRL].dl_addr[CH_A], 2); + + switch (ctrl_dl.port) { + case CTRL_CMD: + DBG1("The Base Band sends this value as a response to a " + "request for IMSI detach sent over the control " + "channel uplink (see section 7.6.1)."); + break; + case CTRL_MDM: + port = PORT_MDM; + enable_ier = MDM_DL; + break; + case CTRL_DIAG: + port = PORT_DIAG; + enable_ier = DIAG_DL; + break; + case CTRL_APP1: + port = PORT_APP1; + enable_ier = APP1_DL; + break; + case CTRL_APP2: + port = PORT_APP2; + enable_ier = APP2_DL; + break; + default: + dev_err(&dc->pdev->dev, + "ERROR: flow control received for non-existing port\n"); + return 0; + }; + + DBG1("0x%04X->0x%04X", *((u16 *)&dc->port[port].ctrl_dl), + *((u16 *)&ctrl_dl)); + + old_ctrl = dc->port[port].ctrl_dl; + dc->port[port].ctrl_dl = ctrl_dl; + + if (old_ctrl.CTS == 1 && ctrl_dl.CTS == 0) { + DBG1("Disable interrupt (0x%04X) on port: %d", + enable_ier, port); + disable_transmit_ul(port, dc); + + } else if (old_ctrl.CTS == 0 && ctrl_dl.CTS == 1) { + + if (__kfifo_len(dc->port[port].fifo_ul)) { + DBG1("Enable interrupt (0x%04X) on port: %d", + enable_ier, port); + DBG1("Data in buffer [%d], enable transmit! ", + __kfifo_len(dc->port[port].fifo_ul)); + enable_transmit_ul(port, dc); + } else { + DBG1("No data in buffer..."); + } + } + + if (*(u16 *)&old_ctrl == *(u16 *)&ctrl_dl) { + DBG1(" No change in mctrl"); + return 1; + } + /* Update statistics */ + if (old_ctrl.CTS != ctrl_dl.CTS) + dc->port[port].tty_icount.cts++; + if (old_ctrl.DSR != ctrl_dl.DSR) + dc->port[port].tty_icount.dsr++; + if (old_ctrl.RI != ctrl_dl.RI) + dc->port[port].tty_icount.rng++; + if (old_ctrl.DCD != ctrl_dl.DCD) + dc->port[port].tty_icount.dcd++; + + wake_up_interruptible(&dc->port[port].tty_wait); + + DBG1("port: %d DCD(%d), CTS(%d), RI(%d), DSR(%d)", + port, + dc->port[port].tty_icount.dcd, dc->port[port].tty_icount.cts, + dc->port[port].tty_icount.rng, dc->port[port].tty_icount.dsr); + + return 1; +} + +static enum ctrl_port_type port2ctrl(enum port_type port, + const struct nozomi *dc) +{ + switch (port) { + case PORT_MDM: + return CTRL_MDM; + case PORT_DIAG: + return CTRL_DIAG; + case PORT_APP1: + return CTRL_APP1; + case PORT_APP2: + return CTRL_APP2; + default: + dev_err(&dc->pdev->dev, + "ERROR: send flow control " \ + "received for non-existing port\n"); + }; + return CTRL_ERROR; +} + +/* + * Send flow control, can only update one channel at a time + * Return 0 - If we have updated all flow control + * Return 1 - If we need to update more flow control, ack current enable more + */ +static int send_flow_control(struct nozomi *dc) +{ + u32 i, more_flow_control_to_be_updated = 0; + u16 *ctrl; + + for (i = PORT_MDM; i < MAX_PORT; i++) { + if (dc->port[i].update_flow_control) { + if (more_flow_control_to_be_updated) { + /* We have more flow control to be updated */ + return 1; + } + dc->port[i].ctrl_ul.port = port2ctrl(i, dc); + ctrl = (u16 *)&dc->port[i].ctrl_ul; + write_mem32(dc->port[PORT_CTRL].ul_addr[0], \ + (u32 *) ctrl, 2); + dc->port[i].update_flow_control = 0; + more_flow_control_to_be_updated = 1; + } + } + return 0; +} + +/* + * Handle donlink data, ports that are handled are modem and diagnostics + * Return 1 - ok + * Return 0 - toggle fields are out of sync + */ +static int handle_data_dl(struct nozomi *dc, enum port_type port, u8 *toggle, + u16 read_iir, u16 mask1, u16 mask2) +{ + if (*toggle == 0 && read_iir & mask1) { + if (receive_data(port, dc)) { + writew(mask1, dc->reg_fcr); + *toggle = !(*toggle); + } + + if (read_iir & mask2) { + if (receive_data(port, dc)) { + writew(mask2, dc->reg_fcr); + *toggle = !(*toggle); + } + } + } else if (*toggle == 1 && read_iir & mask2) { + if (receive_data(port, dc)) { + writew(mask2, dc->reg_fcr); + *toggle = !(*toggle); + } + + if (read_iir & mask1) { + if (receive_data(port, dc)) { + writew(mask1, dc->reg_fcr); + *toggle = !(*toggle); + } + } + } else { + dev_err(&dc->pdev->dev, "port out of sync!, toggle:%d\n", + *toggle); + return 0; + } + return 1; +} + +/* + * Handle uplink data, this is currently for the modem port + * Return 1 - ok + * Return 0 - toggle field are out of sync + */ +static int handle_data_ul(struct nozomi *dc, enum port_type port, u16 read_iir) +{ + u8 *toggle = &(dc->port[port].toggle_ul); + + if (*toggle == 0 && read_iir & MDM_UL1) { + dc->last_ier &= ~MDM_UL; + writew(dc->last_ier, dc->reg_ier); + if (send_data(port, dc)) { + writew(MDM_UL1, dc->reg_fcr); + dc->last_ier = dc->last_ier | MDM_UL; + writew(dc->last_ier, dc->reg_ier); + *toggle = !*toggle; + } + + if (read_iir & MDM_UL2) { + dc->last_ier &= ~MDM_UL; + writew(dc->last_ier, dc->reg_ier); + if (send_data(port, dc)) { + writew(MDM_UL2, dc->reg_fcr); + dc->last_ier = dc->last_ier | MDM_UL; + writew(dc->last_ier, dc->reg_ier); + *toggle = !*toggle; + } + } + + } else if (*toggle == 1 && read_iir & MDM_UL2) { + dc->last_ier &= ~MDM_UL; + writew(dc->last_ier, dc->reg_ier); + if (send_data(port, dc)) { + writew(MDM_UL2, dc->reg_fcr); + dc->last_ier = dc->last_ier | MDM_UL; + writew(dc->last_ier, dc->reg_ier); + *toggle = !*toggle; + } + + if (read_iir & MDM_UL1) { + dc->last_ier &= ~MDM_UL; + writew(dc->last_ier, dc->reg_ier); + if (send_data(port, dc)) { + writew(MDM_UL1, dc->reg_fcr); + dc->last_ier = dc->last_ier | MDM_UL; + writew(dc->last_ier, dc->reg_ier); + *toggle = !*toggle; + } + } + } else { + writew(read_iir & MDM_UL, dc->reg_fcr); + dev_err(&dc->pdev->dev, "port out of sync!\n"); + return 0; + } + return 1; +} + +static irqreturn_t interrupt_handler(int irq, void *dev_id) +{ + struct nozomi *dc = dev_id; + unsigned int a; + u16 read_iir; + + if (!dc) + return IRQ_NONE; + + spin_lock(&dc->spin_mutex); + read_iir = readw(dc->reg_iir); + + /* Card removed */ + if (read_iir == (u16)-1) + goto none; + /* + * Just handle interrupt enabled in IER + * (by masking with dc->last_ier) + */ + read_iir &= dc->last_ier; + + if (read_iir == 0) + goto none; + + + DBG4("%s irq:0x%04X, prev:0x%04X", interrupt2str(read_iir), read_iir, + dc->last_ier); + + if (read_iir & RESET) { + if (unlikely(!nozomi_read_config_table(dc))) { + dc->last_ier = 0x0; + writew(dc->last_ier, dc->reg_ier); + dev_err(&dc->pdev->dev, "Could not read status from " + "card, we should disable interface\n"); + } else { + writew(RESET, dc->reg_fcr); + } + /* No more useful info if this was the reset interrupt. */ + goto exit_handler; + } + if (read_iir & CTRL_UL) { + DBG1("CTRL_UL"); + dc->last_ier &= ~CTRL_UL; + writew(dc->last_ier, dc->reg_ier); + if (send_flow_control(dc)) { + writew(CTRL_UL, dc->reg_fcr); + dc->last_ier = dc->last_ier | CTRL_UL; + writew(dc->last_ier, dc->reg_ier); + } + } + if (read_iir & CTRL_DL) { + receive_flow_control(dc); + writew(CTRL_DL, dc->reg_fcr); + } + if (read_iir & MDM_DL) { + if (!handle_data_dl(dc, PORT_MDM, + &(dc->port[PORT_MDM].toggle_dl), read_iir, + MDM_DL1, MDM_DL2)) { + dev_err(&dc->pdev->dev, "MDM_DL out of sync!\n"); + goto exit_handler; + } + } + if (read_iir & MDM_UL) { + if (!handle_data_ul(dc, PORT_MDM, read_iir)) { + dev_err(&dc->pdev->dev, "MDM_UL out of sync!\n"); + goto exit_handler; + } + } + if (read_iir & DIAG_DL) { + if (!handle_data_dl(dc, PORT_DIAG, + &(dc->port[PORT_DIAG].toggle_dl), read_iir, + DIAG_DL1, DIAG_DL2)) { + dev_err(&dc->pdev->dev, "DIAG_DL out of sync!\n"); + goto exit_handler; + } + } + if (read_iir & DIAG_UL) { + dc->last_ier &= ~DIAG_UL; + writew(dc->last_ier, dc->reg_ier); + if (send_data(PORT_DIAG, dc)) { + writew(DIAG_UL, dc->reg_fcr); + dc->last_ier = dc->last_ier | DIAG_UL; + writew(dc->last_ier, dc->reg_ier); + } + } + if (read_iir & APP1_DL) { + if (receive_data(PORT_APP1, dc)) + writew(APP1_DL, dc->reg_fcr); + } + if (read_iir & APP1_UL) { + dc->last_ier &= ~APP1_UL; + writew(dc->last_ier, dc->reg_ier); + if (send_data(PORT_APP1, dc)) { + writew(APP1_UL, dc->reg_fcr); + dc->last_ier = dc->last_ier | APP1_UL; + writew(dc->last_ier, dc->reg_ier); + } + } + if (read_iir & APP2_DL) { + if (receive_data(PORT_APP2, dc)) + writew(APP2_DL, dc->reg_fcr); + } + if (read_iir & APP2_UL) { + dc->last_ier &= ~APP2_UL; + writew(dc->last_ier, dc->reg_ier); + if (send_data(PORT_APP2, dc)) { + writew(APP2_UL, dc->reg_fcr); + dc->last_ier = dc->last_ier | APP2_UL; + writew(dc->last_ier, dc->reg_ier); + } + } + +exit_handler: + spin_unlock(&dc->spin_mutex); + for (a = 0; a < NOZOMI_MAX_PORTS; a++) + if (test_and_clear_bit(a, &dc->flip)) + tty_flip_buffer_push(dc->port[a].tty); + return IRQ_HANDLED; +none: + spin_unlock(&dc->spin_mutex); + return IRQ_NONE; +} + +static void nozomi_get_card_type(struct nozomi *dc) +{ + int i; + u32 size = 0; + + for (i = 0; i < 6; i++) + size += pci_resource_len(dc->pdev, i); + + /* Assume card type F32_8 if no match */ + dc->card_type = size == 2048 ? F32_2 : F32_8; + + dev_info(&dc->pdev->dev, "Card type is: %d\n", dc->card_type); +} + +static void nozomi_setup_private_data(struct nozomi *dc) +{ + void __iomem *offset = dc->base_addr + dc->card_type / 2; + unsigned int i; + + dc->reg_fcr = (void __iomem *)(offset + R_FCR); + dc->reg_iir = (void __iomem *)(offset + R_IIR); + dc->reg_ier = (void __iomem *)(offset + R_IER); + dc->last_ier = 0; + dc->flip = 0; + + dc->port[PORT_MDM].token_dl = MDM_DL; + dc->port[PORT_DIAG].token_dl = DIAG_DL; + dc->port[PORT_APP1].token_dl = APP1_DL; + dc->port[PORT_APP2].token_dl = APP2_DL; + + for (i = 0; i < MAX_PORT; i++) + init_waitqueue_head(&dc->port[i].tty_wait); +} + +static ssize_t card_type_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct nozomi *dc = pci_get_drvdata(to_pci_dev(dev)); + + return sprintf(buf, "%d\n", dc->card_type); +} +static DEVICE_ATTR(card_type, 0444, card_type_show, NULL); + +static ssize_t open_ttys_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct nozomi *dc = pci_get_drvdata(to_pci_dev(dev)); + + return sprintf(buf, "%u\n", dc->open_ttys); +} +static DEVICE_ATTR(open_ttys, 0444, open_ttys_show, NULL); + +static void make_sysfs_files(struct nozomi *dc) +{ + if (device_create_file(&dc->pdev->dev, &dev_attr_card_type)) + dev_err(&dc->pdev->dev, + "Could not create sysfs file for card_type\n"); + if (device_create_file(&dc->pdev->dev, &dev_attr_open_ttys)) + dev_err(&dc->pdev->dev, + "Could not create sysfs file for open_ttys\n"); +} + +static void remove_sysfs_files(struct nozomi *dc) +{ + device_remove_file(&dc->pdev->dev, &dev_attr_card_type); + device_remove_file(&dc->pdev->dev, &dev_attr_open_ttys); +} + +/* Allocate memory for one device */ +static int __devinit nozomi_card_init(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + resource_size_t start; + int ret; + struct nozomi *dc = NULL; + int ndev_idx; + int i; + + dev_dbg(&pdev->dev, "Init, new card found\n"); + + for (ndev_idx = 0; ndev_idx < ARRAY_SIZE(ndevs); ndev_idx++) + if (!ndevs[ndev_idx]) + break; + + if (ndev_idx >= ARRAY_SIZE(ndevs)) { + dev_err(&pdev->dev, "no free tty range for this card left\n"); + ret = -EIO; + goto err; + } + + dc = kzalloc(sizeof(struct nozomi), GFP_KERNEL); + if (unlikely(!dc)) { + dev_err(&pdev->dev, "Could not allocate memory\n"); + ret = -ENOMEM; + goto err_free; + } + + dc->pdev = pdev; + + /* Find out what card type it is */ + nozomi_get_card_type(dc); + + ret = pci_enable_device(dc->pdev); + if (ret) { + dev_err(&pdev->dev, "Failed to enable PCI Device\n"); + goto err_free; + } + + start = pci_resource_start(dc->pdev, 0); + if (start == 0) { + dev_err(&pdev->dev, "No I/O address for card detected\n"); + ret = -ENODEV; + goto err_disable_device; + } + + ret = pci_request_regions(dc->pdev, NOZOMI_NAME); + if (ret) { + dev_err(&pdev->dev, "I/O address 0x%04x already in use\n", + (int) /* nozomi_private.io_addr */ 0); + goto err_disable_device; + } + + dc->base_addr = ioremap(start, dc->card_type); + if (!dc->base_addr) { + dev_err(&pdev->dev, "Unable to map card MMIO\n"); + ret = -ENODEV; + goto err_rel_regs; + } + + dc->send_buf = kmalloc(SEND_BUF_MAX, GFP_KERNEL); + if (!dc->send_buf) { + dev_err(&pdev->dev, "Could not allocate send buffer?\n"); + ret = -ENOMEM; + goto err_free_sbuf; + } + + spin_lock_init(&dc->spin_mutex); + + nozomi_setup_private_data(dc); + + /* Disable all interrupts */ + dc->last_ier = 0; + writew(dc->last_ier, dc->reg_ier); + + ret = request_irq(pdev->irq, &interrupt_handler, IRQF_SHARED, + NOZOMI_NAME, dc); + if (unlikely(ret)) { + dev_err(&pdev->dev, "can't request irq %d\n", pdev->irq); + goto err_free_sbuf; + } + + DBG1("base_addr: %p", dc->base_addr); + + make_sysfs_files(dc); + + dc->index_start = ndev_idx * MAX_PORT; + ndevs[ndev_idx] = dc; + + for (i = 0; i < MAX_PORT; i++) { + mutex_init(&dc->port[i].tty_sem); + dc->port[i].tty_open_count = 0; + dc->port[i].tty = NULL; + tty_register_device(ntty_driver, dc->index_start + i, + &pdev->dev); + } + + /* Enable RESET interrupt. */ + dc->last_ier = RESET; + writew(dc->last_ier, dc->reg_ier); + + pci_set_drvdata(pdev, dc); + + return 0; + +err_free_sbuf: + kfree(dc->send_buf); + iounmap(dc->base_addr); +err_rel_regs: + pci_release_regions(pdev); +err_disable_device: + pci_disable_device(pdev); +err_free: + kfree(dc); +err: + return ret; +} + +static void __devexit tty_exit(struct nozomi *dc) +{ + unsigned int i; + + DBG1(" "); + + flush_scheduled_work(); + + for (i = 0; i < MAX_PORT; ++i) + if (dc->port[i].tty && \ + list_empty(&dc->port[i].tty->hangup_work.entry)) + tty_hangup(dc->port[i].tty); + + while (dc->open_ttys) + msleep(1); + + for (i = dc->index_start; i < dc->index_start + MAX_PORT; ++i) + tty_unregister_device(ntty_driver, i); +} + +/* Deallocate memory for one device */ +static void __devexit nozomi_card_exit(struct pci_dev *pdev) +{ + int i; + struct ctrl_ul ctrl; + struct nozomi *dc = pci_get_drvdata(pdev); + + /* Disable all interrupts */ + dc->last_ier = 0; + writew(dc->last_ier, dc->reg_ier); + + tty_exit(dc); + + /* Send 0x0001, command card to resend the reset token. */ + /* This is to get the reset when the module is reloaded. */ + ctrl.port = 0x00; + ctrl.reserved = 0; + ctrl.RTS = 0; + ctrl.DTR = 1; + DBG1("sending flow control 0x%04X", *((u16 *)&ctrl)); + + /* Setup dc->reg addresses to we can use defines here */ + write_mem32(dc->port[PORT_CTRL].ul_addr[0], (u32 *)&ctrl, 2); + writew(CTRL_UL, dc->reg_fcr); /* push the token to the card. */ + + remove_sysfs_files(dc); + + free_irq(pdev->irq, dc); + + for (i = 0; i < MAX_PORT; i++) + if (dc->port[i].fifo_ul) + kfifo_free(dc->port[i].fifo_ul); + + kfree(dc->send_buf); + + iounmap(dc->base_addr); + + pci_release_regions(pdev); + + pci_disable_device(pdev); + + ndevs[dc->index_start / MAX_PORT] = NULL; + + kfree(dc); +} + +static void set_rts(const struct tty_struct *tty, int rts) +{ + struct port *port = get_port_by_tty(tty); + + port->ctrl_ul.RTS = rts; + port->update_flow_control = 1; + enable_transmit_ul(PORT_CTRL, get_dc_by_tty(tty)); +} + +static void set_dtr(const struct tty_struct *tty, int dtr) +{ + struct port *port = get_port_by_tty(tty); + + DBG1("SETTING DTR index: %d, dtr: %d", tty->index, dtr); + + port->ctrl_ul.DTR = dtr; + port->update_flow_control = 1; + enable_transmit_ul(PORT_CTRL, get_dc_by_tty(tty)); +} + +/* + * ---------------------------------------------------------------------------- + * TTY code + * ---------------------------------------------------------------------------- + */ + +/* Called when the userspace process opens the tty, /dev/noz*. */ +static int ntty_open(struct tty_struct *tty, struct file *file) +{ + struct port *port = get_port_by_tty(tty); + struct nozomi *dc = get_dc_by_tty(tty); + unsigned long flags; + + if (!port || !dc) + return -ENODEV; + + if (mutex_lock_interruptible(&port->tty_sem)) + return -ERESTARTSYS; + + port->tty_open_count++; + dc->open_ttys++; + + /* Enable interrupt downlink for channel */ + if (port->tty_open_count == 1) { + tty->low_latency = 1; + tty->driver_data = port; + port->tty = tty; + DBG1("open: %d", port->token_dl); + spin_lock_irqsave(&dc->spin_mutex, flags); + dc->last_ier = dc->last_ier | port->token_dl; + writew(dc->last_ier, dc->reg_ier); + spin_unlock_irqrestore(&dc->spin_mutex, flags); + } + + mutex_unlock(&port->tty_sem); + + return 0; +} + +/* Called when the userspace process close the tty, /dev/noz*. */ +static void ntty_close(struct tty_struct *tty, struct file *file) +{ + struct nozomi *dc = get_dc_by_tty(tty); + struct port *port = tty->driver_data; + unsigned long flags; + + if (!dc || !port) + return; + + if (mutex_lock_interruptible(&port->tty_sem)) + return; + + if (!port->tty_open_count) + goto exit; + + dc->open_ttys--; + port->tty_open_count--; + + if (port->tty_open_count == 0) { + DBG1("close: %d", port->token_dl); + spin_lock_irqsave(&dc->spin_mutex, flags); + dc->last_ier &= ~(port->token_dl); + writew(dc->last_ier, dc->reg_ier); + spin_unlock_irqrestore(&dc->spin_mutex, flags); + } + +exit: + mutex_unlock(&port->tty_sem); +} + +/* + * called when the userspace process writes to the tty (/dev/noz*). + * Data is inserted into a fifo, which is then read and transfered to the modem. + */ +static int ntty_write(struct tty_struct *tty, const unsigned char *buffer, + int count) +{ + int rval = -EINVAL; + struct nozomi *dc = get_dc_by_tty(tty); + struct port *port = tty->driver_data; + unsigned long flags; + + /* DBG1( "WRITEx: %d, index = %d", count, index); */ + + if (!dc || !port) + return -ENODEV; + + if (unlikely(!mutex_trylock(&port->tty_sem))) { + /* + * must test lock as tty layer wraps calls + * to this function with BKL + */ + dev_err(&dc->pdev->dev, "Would have deadlocked - " + "return EAGAIN\n"); + return -EAGAIN; + } + + if (unlikely(!port->tty_open_count)) { + DBG1(" "); + goto exit; + } + + rval = __kfifo_put(port->fifo_ul, (unsigned char *)buffer, count); + + /* notify card */ + if (unlikely(dc == NULL)) { + DBG1("No device context?"); + goto exit; + } + + spin_lock_irqsave(&dc->spin_mutex, flags); + /* CTS is only valid on the modem channel */ + if (port == &(dc->port[PORT_MDM])) { + if (port->ctrl_dl.CTS) { + DBG4("Enable interrupt"); + enable_transmit_ul(tty->index % MAX_PORT, dc); + } else { + dev_err(&dc->pdev->dev, + "CTS not active on modem port?\n"); + } + } else { + enable_transmit_ul(tty->index % MAX_PORT, dc); + } + spin_unlock_irqrestore(&dc->spin_mutex, flags); + +exit: + mutex_unlock(&port->tty_sem); + return rval; +} + +/* + * Calculate how much is left in device + * This method is called by the upper tty layer. + * #according to sources N_TTY.c it expects a value >= 0 and + * does not check for negative values. + */ +static int ntty_write_room(struct tty_struct *tty) +{ + struct port *port = tty->driver_data; + int room = 0; + struct nozomi *dc = get_dc_by_tty(tty); + + if (!dc || !port) + return 0; + if (!mutex_trylock(&port->tty_sem)) + return 0; + + if (!port->tty_open_count) + goto exit; + + room = port->fifo_ul->size - __kfifo_len(port->fifo_ul); + +exit: + mutex_unlock(&port->tty_sem); + return room; +} + +/* Gets io control parameters */ +static int ntty_tiocmget(struct tty_struct *tty, struct file *file) +{ + struct port *port = tty->driver_data; + struct ctrl_dl *ctrl_dl = &port->ctrl_dl; + struct ctrl_ul *ctrl_ul = &port->ctrl_ul; + + return (ctrl_ul->RTS ? TIOCM_RTS : 0) | + (ctrl_ul->DTR ? TIOCM_DTR : 0) | + (ctrl_dl->DCD ? TIOCM_CAR : 0) | + (ctrl_dl->RI ? TIOCM_RNG : 0) | + (ctrl_dl->DSR ? TIOCM_DSR : 0) | + (ctrl_dl->CTS ? TIOCM_CTS : 0); +} + +/* Sets io controls parameters */ +static int ntty_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + if (set & TIOCM_RTS) + set_rts(tty, 1); + else if (clear & TIOCM_RTS) + set_rts(tty, 0); + + if (set & TIOCM_DTR) + set_dtr(tty, 1); + else if (clear & TIOCM_DTR) + set_dtr(tty, 0); + + return 0; +} + +static int ntty_cflags_changed(struct port *port, unsigned long flags, + struct async_icount *cprev) +{ + struct async_icount cnow = port->tty_icount; + int ret; + + ret = ((flags & TIOCM_RNG) && (cnow.rng != cprev->rng)) || + ((flags & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) || + ((flags & TIOCM_CD) && (cnow.dcd != cprev->dcd)) || + ((flags & TIOCM_CTS) && (cnow.cts != cprev->cts)); + + *cprev = cnow; + + return ret; +} + +static int ntty_ioctl_tiocgicount(struct port *port, void __user *argp) +{ + struct async_icount cnow = port->tty_icount; + struct serial_icounter_struct icount; + + icount.cts = cnow.cts; + icount.dsr = cnow.dsr; + icount.rng = cnow.rng; + icount.dcd = cnow.dcd; + icount.rx = cnow.rx; + icount.tx = cnow.tx; + icount.frame = cnow.frame; + icount.overrun = cnow.overrun; + icount.parity = cnow.parity; + icount.brk = cnow.brk; + icount.buf_overrun = cnow.buf_overrun; + + return copy_to_user(argp, &icount, sizeof(icount)); +} + +static int ntty_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct port *port = tty->driver_data; + void __user *argp = (void __user *)arg; + int rval = -ENOIOCTLCMD; + + DBG1("******** IOCTL, cmd: %d", cmd); + + switch (cmd) { + case TIOCMIWAIT: { + struct async_icount cprev = port->tty_icount; + + rval = wait_event_interruptible(port->tty_wait, + ntty_cflags_changed(port, arg, &cprev)); + break; + } case TIOCGICOUNT: + rval = ntty_ioctl_tiocgicount(port, argp); + break; + default: + DBG1("ERR: 0x%08X, %d", cmd, cmd); + break; + }; + + return rval; +} + +/* + * Called by the upper tty layer when tty buffers are ready + * to receive data again after a call to throttle. + */ +static void ntty_unthrottle(struct tty_struct *tty) +{ + struct nozomi *dc = get_dc_by_tty(tty); + unsigned long flags; + + DBG1("UNTHROTTLE"); + spin_lock_irqsave(&dc->spin_mutex, flags); + enable_transmit_dl(tty->index % MAX_PORT, dc); + set_rts(tty, 1); + + spin_unlock_irqrestore(&dc->spin_mutex, flags); +} + +/* + * Called by the upper tty layer when the tty buffers are almost full. + * The driver should stop send more data. + */ +static void ntty_throttle(struct tty_struct *tty) +{ + struct nozomi *dc = get_dc_by_tty(tty); + unsigned long flags; + + DBG1("THROTTLE"); + spin_lock_irqsave(&dc->spin_mutex, flags); + set_rts(tty, 0); + spin_unlock_irqrestore(&dc->spin_mutex, flags); +} + +/* just to discard single character writes */ +static void ntty_put_char(struct tty_struct *tty, unsigned char c) +{ + /* FIXME !!! */ + DBG2("PUT CHAR Function: %c", c); +} + +/* Returns number of chars in buffer, called by tty layer */ +static s32 ntty_chars_in_buffer(struct tty_struct *tty) +{ + struct port *port = tty->driver_data; + struct nozomi *dc = get_dc_by_tty(tty); + s32 rval; + + if (unlikely(!dc || !port)) { + rval = -ENODEV; + goto exit_in_buffer; + } + + if (unlikely(!port->tty_open_count)) { + dev_err(&dc->pdev->dev, "No tty open?\n"); + rval = -ENODEV; + goto exit_in_buffer; + } + + rval = __kfifo_len(port->fifo_ul); + +exit_in_buffer: + return rval; +} + +static struct tty_operations tty_ops = { + .ioctl = ntty_ioctl, + .open = ntty_open, + .close = ntty_close, + .write = ntty_write, + .write_room = ntty_write_room, + .unthrottle = ntty_unthrottle, + .throttle = ntty_throttle, + .chars_in_buffer = ntty_chars_in_buffer, + .put_char = ntty_put_char, + .tiocmget = ntty_tiocmget, + .tiocmset = ntty_tiocmset, +}; + +/* Module initialization */ +static struct pci_driver nozomi_driver = { + .name = NOZOMI_NAME, + .id_table = nozomi_pci_tbl, + .probe = nozomi_card_init, + .remove = __devexit_p(nozomi_card_exit), +}; + +static __init int nozomi_init(void) +{ + int ret; + + printk(KERN_INFO "Initializing %s\n", VERSION_STRING); + + ntty_driver = alloc_tty_driver(NTTY_TTY_MAXMINORS); + if (!ntty_driver) + return -ENOMEM; + + ntty_driver->owner = THIS_MODULE; + ntty_driver->driver_name = NOZOMI_NAME_TTY; + ntty_driver->name = "noz"; + ntty_driver->major = 0; + ntty_driver->type = TTY_DRIVER_TYPE_SERIAL; + ntty_driver->subtype = SERIAL_TYPE_NORMAL; + ntty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + ntty_driver->init_termios = tty_std_termios; + ntty_driver->init_termios.c_cflag = B115200 | CS8 | CREAD | \ + HUPCL | CLOCAL; + ntty_driver->init_termios.c_ispeed = 115200; + ntty_driver->init_termios.c_ospeed = 115200; + tty_set_operations(ntty_driver, &tty_ops); + + ret = tty_register_driver(ntty_driver); + if (ret) { + printk(KERN_ERR "Nozomi: failed to register ntty driver\n"); + goto free_tty; + } + + ret = pci_register_driver(&nozomi_driver); + if (ret) { + printk(KERN_ERR "Nozomi: can't register pci driver\n"); + goto unr_tty; + } + + return 0; +unr_tty: + tty_unregister_driver(ntty_driver); +free_tty: + put_tty_driver(ntty_driver); + return ret; +} + +static __exit void nozomi_exit(void) +{ + printk(KERN_INFO "Unloading %s\n", DRIVER_DESC); + pci_unregister_driver(&nozomi_driver); + tty_unregister_driver(ntty_driver); + put_tty_driver(ntty_driver); +} + +module_init(nozomi_init); +module_exit(nozomi_exit); + +module_param(debug, int, S_IRUGO | S_IWUSR); + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_DESCRIPTION(DRIVER_DESC); -- cgit v1.2.3-59-g8ed1b From b1c7192df1b089ed654c76fbf14d7f7dbf4b9616 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Wed, 7 Nov 2007 04:09:46 -0500 Subject: Documentation: Replace obsolete "driverfs" with "sysfs". Signed-off-by: Robert P. J. Day --- Documentation/pnp.txt | 4 ++-- Documentation/s390/cds.txt | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/pnp.txt b/Documentation/pnp.txt index 481faf515d53..a327db67782a 100644 --- a/Documentation/pnp.txt +++ b/Documentation/pnp.txt @@ -17,9 +17,9 @@ The User Interface ------------------ The Linux Plug and Play user interface provides a means to activate PnP devices for legacy and user level drivers that do not support Linux Plug and Play. The -user interface is integrated into driverfs. +user interface is integrated into sysfs. -In addition to the standard driverfs file the following are created in each +In addition to the standard sysfs file the following are created in each device's directory: id - displays a list of support EISA IDs options - displays possible resource configurations diff --git a/Documentation/s390/cds.txt b/Documentation/s390/cds.txt index 3081927cc2d6..c4b7b2bd369a 100644 --- a/Documentation/s390/cds.txt +++ b/Documentation/s390/cds.txt @@ -133,7 +133,7 @@ During its startup the Linux/390 system checks for peripheral devices. Each of those devices is uniquely defined by a so called subchannel by the ESA/390 channel subsystem. While the subchannel numbers are system generated, each subchannel also takes a user defined attribute, the so called device number. -Both subchannel number and device number cannot exceed 65535. During driverfs +Both subchannel number and device number cannot exceed 65535. During sysfs initialisation, the information about control unit type and device types that imply specific I/O commands (channel command words - CCWs) in order to operate the device are gathered. Device drivers can retrieve this set of hardware -- cgit v1.2.3-59-g8ed1b From 7a83d456a86d559a6347115d206d23774bc152d9 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 24 Oct 2007 21:52:56 -0700 Subject: kobject: remove incorrect comment in kobject_rename As pointed out by Kay. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- lib/kobject.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/lib/kobject.c b/lib/kobject.c index 3590f022a609..9500339ae024 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -334,8 +334,6 @@ int kobject_rename(struct kobject * kobj, const char *new_name) sprintf(devpath_string, "DEVPATH_OLD=%s", devpath); envp[0] = devpath_string; envp[1] = NULL; - /* Note : if we want to send the new name alone, not the full path, - * we could probably use kobject_name(kobj); */ error = sysfs_rename_dir(kobj, new_name); -- cgit v1.2.3-59-g8ed1b From 775b64d2b6ca37697de925f70799c710aab5849a Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 12 Jan 2008 20:40:46 +0100 Subject: PM: Acquire device locks on suspend This patch reorganizes the way suspend and resume notifications are sent to drivers. The major changes are that now the PM core acquires every device semaphore before calling the methods, and calls to device_add() during suspends will fail, while calls to device_del() during suspends will block. It also provides a way to safely remove a suspended device with the help of the PM core, by using the device_pm_schedule_removal() callback introduced specifically for this purpose, and updates two drivers (msr and cpuid) that need to use it. Signed-off-by: Alan Stern Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman --- arch/x86/kernel/cpuid.c | 6 +- arch/x86/kernel/msr.c | 6 +- drivers/base/core.c | 65 +++++- drivers/base/power/main.c | 502 +++++++++++++++++++++++++++++---------------- drivers/base/power/power.h | 12 ++ include/linux/device.h | 8 + 6 files changed, 413 insertions(+), 186 deletions(-) diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c index 05c9936a16cc..d387c770c518 100644 --- a/arch/x86/kernel/cpuid.c +++ b/arch/x86/kernel/cpuid.c @@ -157,15 +157,15 @@ static int __cpuinit cpuid_class_cpu_callback(struct notifier_block *nfb, switch (action) { case CPU_UP_PREPARE: - case CPU_UP_PREPARE_FROZEN: err = cpuid_device_create(cpu); break; case CPU_UP_CANCELED: - case CPU_UP_CANCELED_FROZEN: case CPU_DEAD: - case CPU_DEAD_FROZEN: cpuid_device_destroy(cpu); break; + case CPU_UP_CANCELED_FROZEN: + destroy_suspended_device(cpuid_class, MKDEV(CPUID_MAJOR, cpu)); + break; } return err ? NOTIFY_BAD : NOTIFY_OK; } diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c index ee6eba4ecfea..21f6e3c0be18 100644 --- a/arch/x86/kernel/msr.c +++ b/arch/x86/kernel/msr.c @@ -155,15 +155,15 @@ static int __cpuinit msr_class_cpu_callback(struct notifier_block *nfb, switch (action) { case CPU_UP_PREPARE: - case CPU_UP_PREPARE_FROZEN: err = msr_device_create(cpu); break; case CPU_UP_CANCELED: - case CPU_UP_CANCELED_FROZEN: case CPU_DEAD: - case CPU_DEAD_FROZEN: msr_device_destroy(cpu); break; + case CPU_UP_CANCELED_FROZEN: + destroy_suspended_device(msr_class, MKDEV(MSR_MAJOR, cpu)); + break; } return err ? NOTIFY_BAD : NOTIFY_OK; } diff --git a/drivers/base/core.c b/drivers/base/core.c index 2683eac30c68..ce6b64c489ad 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -726,11 +726,20 @@ int device_add(struct device *dev) { struct device *parent = NULL; struct class_interface *class_intf; - int error = -EINVAL; + int error; + + error = pm_sleep_lock(); + if (error) { + dev_warn(dev, "Suspicious %s during suspend\n", __FUNCTION__); + dump_stack(); + return error; + } dev = get_device(dev); - if (!dev || !strlen(dev->bus_id)) + if (!dev || !strlen(dev->bus_id)) { + error = -EINVAL; goto Error; + } pr_debug("DEV: registering device: ID = '%s'\n", dev->bus_id); @@ -795,6 +804,7 @@ int device_add(struct device *dev) } Done: put_device(dev); + pm_sleep_unlock(); return error; BusError: device_pm_remove(dev); @@ -905,6 +915,7 @@ void device_del(struct device * dev) struct device * parent = dev->parent; struct class_interface *class_intf; + device_pm_remove(dev); if (parent) klist_del(&dev->knode_parent); if (MAJOR(dev->devt)) @@ -981,7 +992,6 @@ void device_del(struct device * dev) if (dev->bus) blocking_notifier_call_chain(&dev->bus->bus_notifier, BUS_NOTIFY_DEL_DEVICE, dev); - device_pm_remove(dev); kobject_uevent(&dev->kobj, KOBJ_REMOVE); kobject_del(&dev->kobj); if (parent) @@ -1156,14 +1166,11 @@ error: EXPORT_SYMBOL_GPL(device_create); /** - * device_destroy - removes a device that was created with device_create() + * find_device - finds a device that was created with device_create() * @class: pointer to the struct class that this device was registered with * @devt: the dev_t of the device that was previously registered - * - * This call unregisters and cleans up a device that was created with a - * call to device_create(). */ -void device_destroy(struct class *class, dev_t devt) +static struct device *find_device(struct class *class, dev_t devt) { struct device *dev = NULL; struct device *dev_tmp; @@ -1176,12 +1183,54 @@ void device_destroy(struct class *class, dev_t devt) } } up(&class->sem); + return dev; +} +/** + * device_destroy - removes a device that was created with device_create() + * @class: pointer to the struct class that this device was registered with + * @devt: the dev_t of the device that was previously registered + * + * This call unregisters and cleans up a device that was created with a + * call to device_create(). + */ +void device_destroy(struct class *class, dev_t devt) +{ + struct device *dev; + + dev = find_device(class, devt); if (dev) device_unregister(dev); } EXPORT_SYMBOL_GPL(device_destroy); +#ifdef CONFIG_PM_SLEEP +/** + * destroy_suspended_device - asks the PM core to remove a suspended device + * @class: pointer to the struct class that this device was registered with + * @devt: the dev_t of the device that was previously registered + * + * This call notifies the PM core of the necessity to unregister a suspended + * device created with a call to device_create() (devices cannot be + * unregistered directly while suspended, since the PM core holds their + * semaphores at that time). + * + * It can only be called within the scope of a system sleep transition. In + * practice this means it has to be directly or indirectly invoked either by + * a suspend or resume method, or by the PM core (e.g. via + * disable_nonboot_cpus() or enable_nonboot_cpus()). + */ +void destroy_suspended_device(struct class *class, dev_t devt) +{ + struct device *dev; + + dev = find_device(class, devt); + if (dev) + device_pm_schedule_removal(dev); +} +EXPORT_SYMBOL_GPL(destroy_suspended_device); +#endif /* CONFIG_PM_SLEEP */ + /** * device_rename - renames a device * @dev: the pointer to the struct device to be renamed diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 691ffb64cc37..200ed5fafd50 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -24,20 +24,45 @@ #include #include #include +#include #include "../base.h" #include "power.h" +/* + * The entries in the dpm_active list are in a depth first order, simply + * because children are guaranteed to be discovered after parents, and + * are inserted at the back of the list on discovery. + * + * All the other lists are kept in the same order, for consistency. + * However the lists aren't always traversed in the same order. + * Semaphores must be acquired from the top (i.e., front) down + * and released in the opposite order. Devices must be suspended + * from the bottom (i.e., end) up and resumed in the opposite order. + * That way no parent will be suspended while it still has an active + * child. + * + * Since device_pm_add() may be called with a device semaphore held, + * we must never try to acquire a device semaphore while holding + * dpm_list_mutex. + */ + LIST_HEAD(dpm_active); +static LIST_HEAD(dpm_locked); static LIST_HEAD(dpm_off); static LIST_HEAD(dpm_off_irq); +static LIST_HEAD(dpm_destroy); -static DEFINE_MUTEX(dpm_mtx); static DEFINE_MUTEX(dpm_list_mtx); -int (*platform_enable_wakeup)(struct device *dev, int is_on); +static DECLARE_RWSEM(pm_sleep_rwsem); +int (*platform_enable_wakeup)(struct device *dev, int is_on); +/** + * device_pm_add - add a device to the list of active devices + * @dev: Device to be added to the list + */ void device_pm_add(struct device *dev) { pr_debug("PM: Adding info for %s:%s\n", @@ -48,8 +73,36 @@ void device_pm_add(struct device *dev) mutex_unlock(&dpm_list_mtx); } +/** + * device_pm_remove - remove a device from the list of active devices + * @dev: Device to be removed from the list + * + * This function also removes the device's PM-related sysfs attributes. + */ void device_pm_remove(struct device *dev) { + /* + * If this function is called during a suspend, it will be blocked, + * because we're holding the device's semaphore at that time, which may + * lead to a deadlock. In that case we want to print a warning. + * However, it may also be called by unregister_dropped_devices() with + * the device's semaphore released, in which case the warning should + * not be printed. + */ + if (down_trylock(&dev->sem)) { + if (down_read_trylock(&pm_sleep_rwsem)) { + /* No suspend in progress, wait on dev->sem */ + down(&dev->sem); + up_read(&pm_sleep_rwsem); + } else { + /* Suspend in progress, we may deadlock */ + dev_warn(dev, "Suspicious %s during suspend\n", + __FUNCTION__); + dump_stack(); + /* The user has been warned ... */ + down(&dev->sem); + } + } pr_debug("PM: Removing info for %s:%s\n", dev->bus ? dev->bus->name : "No Bus", kobject_name(&dev->kobj)); @@ -57,25 +110,124 @@ void device_pm_remove(struct device *dev) dpm_sysfs_remove(dev); list_del_init(&dev->power.entry); mutex_unlock(&dpm_list_mtx); + up(&dev->sem); +} + +/** + * device_pm_schedule_removal - schedule the removal of a suspended device + * @dev: Device to destroy + * + * Moves the device to the dpm_destroy list for further processing by + * unregister_dropped_devices(). + */ +void device_pm_schedule_removal(struct device *dev) +{ + pr_debug("PM: Preparing for removal: %s:%s\n", + dev->bus ? dev->bus->name : "No Bus", + kobject_name(&dev->kobj)); + mutex_lock(&dpm_list_mtx); + list_move_tail(&dev->power.entry, &dpm_destroy); + mutex_unlock(&dpm_list_mtx); +} + +/** + * pm_sleep_lock - mutual exclusion for registration and suspend + * + * Returns 0 if no suspend is underway and device registration + * may proceed, otherwise -EBUSY. + */ +int pm_sleep_lock(void) +{ + if (down_read_trylock(&pm_sleep_rwsem)) + return 0; + + return -EBUSY; +} + +/** + * pm_sleep_unlock - mutual exclusion for registration and suspend + * + * This routine undoes the effect of device_pm_add_lock + * when a device's registration is complete. + */ +void pm_sleep_unlock(void) +{ + up_read(&pm_sleep_rwsem); } /*------------------------- Resume routines -------------------------*/ /** - * resume_device - Restore state for one device. + * resume_device_early - Power on one device (early resume). * @dev: Device. * + * Must be called with interrupts disabled. */ - -static int resume_device(struct device * dev) +static int resume_device_early(struct device *dev) { int error = 0; TRACE_DEVICE(dev); TRACE_RESUME(0); - down(&dev->sem); + if (dev->bus && dev->bus->resume_early) { + dev_dbg(dev, "EARLY resume\n"); + error = dev->bus->resume_early(dev); + } + + TRACE_RESUME(error); + return error; +} + +/** + * dpm_power_up - Power on all regular (non-sysdev) devices. + * + * Walk the dpm_off_irq list and power each device up. This + * is used for devices that required they be powered down with + * interrupts disabled. As devices are powered on, they are moved + * to the dpm_off list. + * + * Must be called with interrupts disabled and only one CPU running. + */ +static void dpm_power_up(void) +{ + + while (!list_empty(&dpm_off_irq)) { + struct list_head *entry = dpm_off_irq.next; + struct device *dev = to_device(entry); + + list_move_tail(entry, &dpm_off); + resume_device_early(dev); + } +} + +/** + * device_power_up - Turn on all devices that need special attention. + * + * Power on system devices, then devices that required we shut them down + * with interrupts disabled. + * + * Must be called with interrupts disabled. + */ +void device_power_up(void) +{ + sysdev_resume(); + dpm_power_up(); +} +EXPORT_SYMBOL_GPL(device_power_up); + +/** + * resume_device - Restore state for one device. + * @dev: Device. + * + */ +static int resume_device(struct device *dev) +{ + int error = 0; + + TRACE_DEVICE(dev); + TRACE_RESUME(0); if (dev->bus && dev->bus->resume) { dev_dbg(dev,"resuming\n"); @@ -92,126 +244,94 @@ static int resume_device(struct device * dev) error = dev->class->resume(dev); } - up(&dev->sem); - TRACE_RESUME(error); return error; } - -static int resume_device_early(struct device * dev) -{ - int error = 0; - - TRACE_DEVICE(dev); - TRACE_RESUME(0); - if (dev->bus && dev->bus->resume_early) { - dev_dbg(dev,"EARLY resume\n"); - error = dev->bus->resume_early(dev); - } - TRACE_RESUME(error); - return error; -} - -/* - * Resume the devices that have either not gone through - * the late suspend, or that did go through it but also - * went through the early resume +/** + * dpm_resume - Resume every device. + * + * Resume the devices that have either not gone through + * the late suspend, or that did go through it but also + * went through the early resume. + * + * Take devices from the dpm_off_list, resume them, + * and put them on the dpm_locked list. */ static void dpm_resume(void) { mutex_lock(&dpm_list_mtx); while(!list_empty(&dpm_off)) { - struct list_head * entry = dpm_off.next; - struct device * dev = to_device(entry); - - get_device(dev); - list_move_tail(entry, &dpm_active); + struct list_head *entry = dpm_off.next; + struct device *dev = to_device(entry); + list_move_tail(entry, &dpm_locked); mutex_unlock(&dpm_list_mtx); resume_device(dev); mutex_lock(&dpm_list_mtx); - put_device(dev); } mutex_unlock(&dpm_list_mtx); } - /** - * device_resume - Restore state of each device in system. + * unlock_all_devices - Release each device's semaphore * - * Walk the dpm_off list, remove each entry, resume the device, - * then add it to the dpm_active list. + * Go through the dpm_off list. Put each device on the dpm_active + * list and unlock it. */ - -void device_resume(void) +static void unlock_all_devices(void) { - might_sleep(); - mutex_lock(&dpm_mtx); - dpm_resume(); - mutex_unlock(&dpm_mtx); -} - -EXPORT_SYMBOL_GPL(device_resume); + mutex_lock(&dpm_list_mtx); + while (!list_empty(&dpm_locked)) { + struct list_head *entry = dpm_locked.prev; + struct device *dev = to_device(entry); + list_move(entry, &dpm_active); + up(&dev->sem); + } + mutex_unlock(&dpm_list_mtx); +} /** - * dpm_power_up - Power on some devices. - * - * Walk the dpm_off_irq list and power each device up. This - * is used for devices that required they be powered down with - * interrupts disabled. As devices are powered on, they are moved - * to the dpm_active list. + * unregister_dropped_devices - Unregister devices scheduled for removal * - * Interrupts must be disabled when calling this. + * Unregister all devices on the dpm_destroy list. */ - -static void dpm_power_up(void) +static void unregister_dropped_devices(void) { - while(!list_empty(&dpm_off_irq)) { - struct list_head * entry = dpm_off_irq.next; - struct device * dev = to_device(entry); + mutex_lock(&dpm_list_mtx); + while (!list_empty(&dpm_destroy)) { + struct list_head *entry = dpm_destroy.next; + struct device *dev = to_device(entry); - list_move_tail(entry, &dpm_off); - resume_device_early(dev); + up(&dev->sem); + mutex_unlock(&dpm_list_mtx); + /* This also removes the device from the list */ + device_unregister(dev); + mutex_lock(&dpm_list_mtx); } + mutex_unlock(&dpm_list_mtx); } - /** - * device_power_up - Turn on all devices that need special attention. + * device_resume - Restore state of each device in system. * - * Power on system devices then devices that required we shut them down - * with interrupts disabled. - * Called with interrupts disabled. + * Resume all the devices, unlock them all, and allow new + * devices to be registered once again. */ - -void device_power_up(void) +void device_resume(void) { - sysdev_resume(); - dpm_power_up(); + might_sleep(); + dpm_resume(); + unlock_all_devices(); + unregister_dropped_devices(); + up_write(&pm_sleep_rwsem); } - -EXPORT_SYMBOL_GPL(device_power_up); +EXPORT_SYMBOL_GPL(device_resume); /*------------------------- Suspend routines -------------------------*/ -/* - * The entries in the dpm_active list are in a depth first order, simply - * because children are guaranteed to be discovered after parents, and - * are inserted at the back of the list on discovery. - * - * All list on the suspend path are done in reverse order, so we operate - * on the leaves of the device tree (or forests, depending on how you want - * to look at it ;) first. As nodes are removed from the back of the list, - * they are inserted into the front of their destintation lists. - * - * Things are the reverse on the resume path - iterations are done in - * forward order, and nodes are inserted at the back of their destination - * lists. This way, the ancestors will be accessed before their descendents. - */ - static inline char *suspend_verb(u32 event) { switch (event) { @@ -222,7 +342,6 @@ static inline char *suspend_verb(u32 event) } } - static void suspend_device_dbg(struct device *dev, pm_message_t state, char *info) { @@ -232,16 +351,73 @@ suspend_device_dbg(struct device *dev, pm_message_t state, char *info) } /** - * suspend_device - Save state of one device. + * suspend_device_late - Shut down one device (late suspend). * @dev: Device. * @state: Power state device is entering. + * + * This is called with interrupts off and only a single CPU running. */ +static int suspend_device_late(struct device *dev, pm_message_t state) +{ + int error = 0; -static int suspend_device(struct device * dev, pm_message_t state) + if (dev->bus && dev->bus->suspend_late) { + suspend_device_dbg(dev, state, "LATE "); + error = dev->bus->suspend_late(dev, state); + suspend_report_result(dev->bus->suspend_late, error); + } + return error; +} + +/** + * device_power_down - Shut down special devices. + * @state: Power state to enter. + * + * Power down devices that require interrupts to be disabled + * and move them from the dpm_off list to the dpm_off_irq list. + * Then power down system devices. + * + * Must be called with interrupts disabled and only one CPU running. + */ +int device_power_down(pm_message_t state) +{ + int error = 0; + + while (!list_empty(&dpm_off)) { + struct list_head *entry = dpm_off.prev; + struct device *dev = to_device(entry); + + list_del_init(&dev->power.entry); + error = suspend_device_late(dev, state); + if (error) { + printk(KERN_ERR "Could not power down device %s: " + "error %d\n", + kobject_name(&dev->kobj), error); + if (list_empty(&dev->power.entry)) + list_add(&dev->power.entry, &dpm_off); + break; + } + if (list_empty(&dev->power.entry)) + list_add(&dev->power.entry, &dpm_off_irq); + } + + if (!error) + error = sysdev_suspend(state); + if (error) + dpm_power_up(); + return error; +} +EXPORT_SYMBOL_GPL(device_power_down); + +/** + * suspend_device - Save state of one device. + * @dev: Device. + * @state: Power state device is entering. + */ +int suspend_device(struct device *dev, pm_message_t state) { int error = 0; - down(&dev->sem); if (dev->power.power_state.event) { dev_dbg(dev, "PM: suspend %d-->%d\n", dev->power.power_state.event, state.event); @@ -264,123 +440,105 @@ static int suspend_device(struct device * dev, pm_message_t state) error = dev->bus->suspend(dev, state); suspend_report_result(dev->bus->suspend, error); } - up(&dev->sem); - return error; -} - - -/* - * This is called with interrupts off, only a single CPU - * running. We can't acquire a mutex or semaphore (and we don't - * need the protection) - */ -static int suspend_device_late(struct device *dev, pm_message_t state) -{ - int error = 0; - - if (dev->bus && dev->bus->suspend_late) { - suspend_device_dbg(dev, state, "LATE "); - error = dev->bus->suspend_late(dev, state); - suspend_report_result(dev->bus->suspend_late, error); - } return error; } /** - * device_suspend - Save state and stop all devices in system. - * @state: Power state to put each device in. + * dpm_suspend - Suspend every device. + * @state: Power state to put each device in. * - * Walk the dpm_active list, call ->suspend() for each device, and move - * it to the dpm_off list. + * Walk the dpm_locked list. Suspend each device and move it + * to the dpm_off list. * * (For historical reasons, if it returns -EAGAIN, that used to mean * that the device would be called again with interrupts disabled. * These days, we use the "suspend_late()" callback for that, so we * print a warning and consider it an error). - * - * If we get a different error, try and back out. - * - * If we hit a failure with any of the devices, call device_resume() - * above to bring the suspended devices back to life. - * */ - -int device_suspend(pm_message_t state) +static int dpm_suspend(pm_message_t state) { int error = 0; - might_sleep(); - mutex_lock(&dpm_mtx); mutex_lock(&dpm_list_mtx); - while (!list_empty(&dpm_active) && error == 0) { - struct list_head * entry = dpm_active.prev; - struct device * dev = to_device(entry); + while (!list_empty(&dpm_locked)) { + struct list_head *entry = dpm_locked.prev; + struct device *dev = to_device(entry); - get_device(dev); + list_del_init(&dev->power.entry); mutex_unlock(&dpm_list_mtx); - error = suspend_device(dev, state); - - mutex_lock(&dpm_list_mtx); - - /* Check if the device got removed */ - if (!list_empty(&dev->power.entry)) { - /* Move it to the dpm_off list */ - if (!error) - list_move(&dev->power.entry, &dpm_off); - } - if (error) + if (error) { printk(KERN_ERR "Could not suspend device %s: " - "error %d%s\n", - kobject_name(&dev->kobj), error, - error == -EAGAIN ? " (please convert to suspend_late)" : ""); - put_device(dev); + "error %d%s\n", + kobject_name(&dev->kobj), + error, + (error == -EAGAIN ? + " (please convert to suspend_late)" : + "")); + mutex_lock(&dpm_list_mtx); + if (list_empty(&dev->power.entry)) + list_add(&dev->power.entry, &dpm_locked); + mutex_unlock(&dpm_list_mtx); + break; + } + mutex_lock(&dpm_list_mtx); + if (list_empty(&dev->power.entry)) + list_add(&dev->power.entry, &dpm_off); } mutex_unlock(&dpm_list_mtx); - if (error) - dpm_resume(); - mutex_unlock(&dpm_mtx); return error; } -EXPORT_SYMBOL_GPL(device_suspend); - /** - * device_power_down - Shut down special devices. - * @state: Power state to enter. + * lock_all_devices - Acquire every device's semaphore * - * Walk the dpm_off_irq list, calling ->power_down() for each device that - * couldn't power down the device with interrupts enabled. When we're - * done, power down system devices. + * Go through the dpm_active list. Carefully lock each device's + * semaphore and put it in on the dpm_locked list. */ - -int device_power_down(pm_message_t state) +static void lock_all_devices(void) { - int error = 0; - struct device * dev; + mutex_lock(&dpm_list_mtx); + while (!list_empty(&dpm_active)) { + struct list_head *entry = dpm_active.next; + struct device *dev = to_device(entry); - while (!list_empty(&dpm_off)) { - struct list_head * entry = dpm_off.prev; + /* Required locking order is dev->sem first, + * then dpm_list_mutex. Hence this awkward code. + */ + get_device(dev); + mutex_unlock(&dpm_list_mtx); + down(&dev->sem); + mutex_lock(&dpm_list_mtx); - dev = to_device(entry); - error = suspend_device_late(dev, state); - if (error) - goto Error; - list_move(&dev->power.entry, &dpm_off_irq); + if (list_empty(entry)) + up(&dev->sem); /* Device was removed */ + else + list_move_tail(entry, &dpm_locked); + put_device(dev); } + mutex_unlock(&dpm_list_mtx); +} + +/** + * device_suspend - Save state and stop all devices in system. + * + * Prevent new devices from being registered, then lock all devices + * and suspend them. + */ +int device_suspend(pm_message_t state) +{ + int error; - error = sysdev_suspend(state); - Done: + might_sleep(); + down_write(&pm_sleep_rwsem); + lock_all_devices(); + error = dpm_suspend(state); + if (error) + device_resume(); return error; - Error: - printk(KERN_ERR "Could not power down device %s: " - "error %d\n", kobject_name(&dev->kobj), error); - dpm_power_up(); - goto Done; } - -EXPORT_SYMBOL_GPL(device_power_down); +EXPORT_SYMBOL_GPL(device_suspend); void __suspend_report_result(const char *function, void *fn, int ret) { diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h index 379da4e958e0..10c20840395e 100644 --- a/drivers/base/power/power.h +++ b/drivers/base/power/power.h @@ -20,6 +20,9 @@ static inline struct device *to_device(struct list_head *entry) extern void device_pm_add(struct device *); extern void device_pm_remove(struct device *); +extern void device_pm_schedule_removal(struct device *); +extern int pm_sleep_lock(void); +extern void pm_sleep_unlock(void); #else /* CONFIG_PM_SLEEP */ @@ -32,6 +35,15 @@ static inline void device_pm_remove(struct device *dev) { } +static inline int pm_sleep_lock(void) +{ + return 0; +} + +static inline void pm_sleep_unlock(void) +{ +} + #endif #ifdef CONFIG_PM diff --git a/include/linux/device.h b/include/linux/device.h index 2e15822fe409..cf4ae5c5d193 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -521,6 +521,14 @@ extern struct device *device_create(struct class *cls, struct device *parent, dev_t devt, const char *fmt, ...) __attribute__((format(printf,4,5))); extern void device_destroy(struct class *cls, dev_t devt); +#ifdef CONFIG_PM_SLEEP +extern void destroy_suspended_device(struct class *cls, dev_t devt); +#else /* !CONFIG_PM_SLEEP */ +static inline void destroy_suspended_device(struct class *cls, dev_t devt) +{ + device_destroy(cls, devt); +} +#endif /* !CONFIG_PM_SLEEP */ /* * Platform "fixup" functions - allow the platform to have their say -- cgit v1.2.3-59-g8ed1b From 41ca28ab2abd76dc203e2c3a7cd609607cb927c3 Mon Sep 17 00:00:00 2001 From: Evgeniy Polyakov Date: Mon, 10 Dec 2007 23:03:43 +0300 Subject: kref: add kref_set() This adds kref_set() to the kref api for future use by people who really know what they are doing with krefs... From: Evgeniy Polyakov Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/kref.h | 1 + lib/kref.c | 15 +++++++++++++-- 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/include/linux/kref.h b/include/linux/kref.h index 6fee3539893f..5d185635786e 100644 --- a/include/linux/kref.h +++ b/include/linux/kref.h @@ -24,6 +24,7 @@ struct kref { atomic_t refcount; }; +void kref_set(struct kref *kref, int num); void kref_init(struct kref *kref); void kref_get(struct kref *kref); int kref_put(struct kref *kref, void (*release) (struct kref *kref)); diff --git a/lib/kref.c b/lib/kref.c index a6dc3ec328e0..9ecd6e865610 100644 --- a/lib/kref.c +++ b/lib/kref.c @@ -14,14 +14,24 @@ #include #include +/** + * kref_set - initialize object and set refcount to requested number. + * @kref: object in question. + * @num: initial reference counter + */ +void kref_set(struct kref *kref, int num) +{ + atomic_set(&kref->refcount, num); + smp_mb(); +} + /** * kref_init - initialize object. * @kref: object in question. */ void kref_init(struct kref *kref) { - atomic_set(&kref->refcount,1); - smp_mb(); + kref_set(kref, 1); } /** @@ -61,6 +71,7 @@ int kref_put(struct kref *kref, void (*release)(struct kref *kref)) return 0; } +EXPORT_SYMBOL(kref_set); EXPORT_SYMBOL(kref_init); EXPORT_SYMBOL(kref_get); EXPORT_SYMBOL(kref_put); -- cgit v1.2.3-59-g8ed1b From 7ea7ed01ff741918532978b30f6f226ed6f78476 Mon Sep 17 00:00:00 2001 From: Tony Jones Date: Tue, 25 Sep 2007 02:03:03 +0200 Subject: aoechr: Convert from class_device to device Signed-off-by: Tony Jones Cc: Jens Axboe Cc: Sam Hopkins Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/block/aoe/aoechr.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/block/aoe/aoechr.c b/drivers/block/aoe/aoechr.c index 39e563ea0878..d5480e34cb22 100644 --- a/drivers/block/aoe/aoechr.c +++ b/drivers/block/aoe/aoechr.c @@ -259,9 +259,8 @@ aoechr_init(void) return PTR_ERR(aoe_class); } for (i = 0; i < ARRAY_SIZE(chardevs); ++i) - class_device_create(aoe_class, NULL, - MKDEV(AOE_MAJOR, chardevs[i].minor), - NULL, chardevs[i].name); + device_create(aoe_class, NULL, + MKDEV(AOE_MAJOR, chardevs[i].minor), chardevs[i].name); return 0; } @@ -272,7 +271,7 @@ aoechr_exit(void) int i; for (i = 0; i < ARRAY_SIZE(chardevs); ++i) - class_device_destroy(aoe_class, MKDEV(AOE_MAJOR, chardevs[i].minor)); + device_destroy(aoe_class, MKDEV(AOE_MAJOR, chardevs[i].minor)); class_destroy(aoe_class); unregister_chrdev(AOE_MAJOR, "aoechr"); } -- cgit v1.2.3-59-g8ed1b From 62ca8792560e5bd7dc09f54ed3523a7864f416c7 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Tue, 25 Sep 2007 02:03:03 +0200 Subject: coda: convert struct class_device to struct device Signed-off-by: Kay Sievers Cc: Tony Jones Cc: Jan Harkes Signed-off-by: Greg Kroah-Hartman --- fs/coda/psdev.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/coda/psdev.c b/fs/coda/psdev.c index dcc6aead70f5..e3eb3556622b 100644 --- a/fs/coda/psdev.c +++ b/fs/coda/psdev.c @@ -362,8 +362,8 @@ static int init_coda_psdev(void) goto out_chrdev; } for (i = 0; i < MAX_CODADEVS; i++) - class_device_create(coda_psdev_class, NULL, - MKDEV(CODA_PSDEV_MAJOR,i), NULL, "cfs%d", i); + device_create(coda_psdev_class, NULL, + MKDEV(CODA_PSDEV_MAJOR,i), "cfs%d", i); coda_sysctl_init(); goto out; @@ -405,7 +405,7 @@ static int __init init_coda(void) return 0; out: for (i = 0; i < MAX_CODADEVS; i++) - class_device_destroy(coda_psdev_class, MKDEV(CODA_PSDEV_MAJOR, i)); + device_destroy(coda_psdev_class, MKDEV(CODA_PSDEV_MAJOR, i)); class_destroy(coda_psdev_class); unregister_chrdev(CODA_PSDEV_MAJOR, "coda"); coda_sysctl_clean(); @@ -424,7 +424,7 @@ static void __exit exit_coda(void) printk("coda: failed to unregister filesystem\n"); } for (i = 0; i < MAX_CODADEVS; i++) - class_device_destroy(coda_psdev_class, MKDEV(CODA_PSDEV_MAJOR, i)); + device_destroy(coda_psdev_class, MKDEV(CODA_PSDEV_MAJOR, i)); class_destroy(coda_psdev_class); unregister_chrdev(CODA_PSDEV_MAJOR, "coda"); coda_sysctl_clean(); -- cgit v1.2.3-59-g8ed1b From 891f78ea833edd4a1e524e15bfe297a7a84d81a0 Mon Sep 17 00:00:00 2001 From: Tony Jones Date: Tue, 25 Sep 2007 02:03:03 +0200 Subject: DMA: Convert from class_device to device for DMA engine Signed-off-by: Tony Jones Signed-off-by: Dan Williams Cc: Shannon Nelson Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/dma/dmaengine.c | 43 ++++++++++++++++++++++--------------------- include/linux/dmaengine.h | 3 ++- 2 files changed, 24 insertions(+), 22 deletions(-) diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index d59b2f417306..bcf52df30339 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -41,12 +41,12 @@ * the definition of dma_event_callback in dmaengine.h. * * Each device has a kref, which is initialized to 1 when the device is - * registered. A kref_get is done for each class_device registered. When the - * class_device is released, the coresponding kref_put is done in the release + * registered. A kref_get is done for each device registered. When the + * device is released, the coresponding kref_put is done in the release * method. Every time one of the device's channels is allocated to a client, * a kref_get occurs. When the channel is freed, the coresponding kref_put * happens. The device's release function does a completion, so - * unregister_device does a remove event, class_device_unregister, a kref_put + * unregister_device does a remove event, device_unregister, a kref_put * for the first reference, then waits on the completion for all other * references to finish. * @@ -77,9 +77,9 @@ static LIST_HEAD(dma_client_list); /* --- sysfs implementation --- */ -static ssize_t show_memcpy_count(struct class_device *cd, char *buf) +static ssize_t show_memcpy_count(struct device *dev, struct device_attribute *attr, char *buf) { - struct dma_chan *chan = container_of(cd, struct dma_chan, class_dev); + struct dma_chan *chan = to_dma_chan(dev); unsigned long count = 0; int i; @@ -89,9 +89,10 @@ static ssize_t show_memcpy_count(struct class_device *cd, char *buf) return sprintf(buf, "%lu\n", count); } -static ssize_t show_bytes_transferred(struct class_device *cd, char *buf) +static ssize_t show_bytes_transferred(struct device *dev, struct device_attribute *attr, + char *buf) { - struct dma_chan *chan = container_of(cd, struct dma_chan, class_dev); + struct dma_chan *chan = to_dma_chan(dev); unsigned long count = 0; int i; @@ -101,9 +102,9 @@ static ssize_t show_bytes_transferred(struct class_device *cd, char *buf) return sprintf(buf, "%lu\n", count); } -static ssize_t show_in_use(struct class_device *cd, char *buf) +static ssize_t show_in_use(struct device *dev, struct device_attribute *attr, char *buf) { - struct dma_chan *chan = container_of(cd, struct dma_chan, class_dev); + struct dma_chan *chan = to_dma_chan(dev); int in_use = 0; if (unlikely(chan->slow_ref) && @@ -119,7 +120,7 @@ static ssize_t show_in_use(struct class_device *cd, char *buf) return sprintf(buf, "%d\n", in_use); } -static struct class_device_attribute dma_class_attrs[] = { +static struct device_attribute dma_attrs[] = { __ATTR(memcpy_count, S_IRUGO, show_memcpy_count, NULL), __ATTR(bytes_transferred, S_IRUGO, show_bytes_transferred, NULL), __ATTR(in_use, S_IRUGO, show_in_use, NULL), @@ -128,16 +129,16 @@ static struct class_device_attribute dma_class_attrs[] = { static void dma_async_device_cleanup(struct kref *kref); -static void dma_class_dev_release(struct class_device *cd) +static void dma_dev_release(struct device *dev) { - struct dma_chan *chan = container_of(cd, struct dma_chan, class_dev); + struct dma_chan *chan = to_dma_chan(dev); kref_put(&chan->device->refcount, dma_async_device_cleanup); } static struct class dma_devclass = { - .name = "dma", - .class_dev_attrs = dma_class_attrs, - .release = dma_class_dev_release, + .name = "dma", + .dev_attrs = dma_attrs, + .dev_release = dma_dev_release, }; /* --- client and device registration --- */ @@ -377,12 +378,12 @@ int dma_async_device_register(struct dma_device *device) continue; chan->chan_id = chancnt++; - chan->class_dev.class = &dma_devclass; - chan->class_dev.dev = NULL; - snprintf(chan->class_dev.class_id, BUS_ID_SIZE, "dma%dchan%d", + chan->dev.class = &dma_devclass; + chan->dev.parent = NULL; + snprintf(chan->dev.bus_id, BUS_ID_SIZE, "dma%dchan%d", device->dev_id, chan->chan_id); - rc = class_device_register(&chan->class_dev); + rc = device_register(&chan->dev); if (rc) { chancnt--; free_percpu(chan->local); @@ -411,7 +412,7 @@ err_out: if (chan->local == NULL) continue; kref_put(&device->refcount, dma_async_device_cleanup); - class_device_unregister(&chan->class_dev); + device_unregister(&chan->dev); chancnt--; free_percpu(chan->local); } @@ -445,7 +446,7 @@ void dma_async_device_unregister(struct dma_device *device) list_for_each_entry(chan, &device->channels, device_node) { dma_clients_notify_removed(chan); - class_device_unregister(&chan->class_dev); + device_unregister(&chan->dev); dma_chan_release(chan); } diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index a3b6035b6c86..55c9a6952f44 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -132,7 +132,7 @@ struct dma_chan { /* sysfs */ int chan_id; - struct class_device class_dev; + struct device dev; struct kref refcount; int slow_ref; @@ -142,6 +142,7 @@ struct dma_chan { struct dma_chan_percpu *local; }; +#define to_dma_chan(p) container_of(p, struct dma_chan, dev) void dma_chan_cleanup(struct kref *kref); -- cgit v1.2.3-59-g8ed1b From dbc1272ed4a9ce45ecc50e7ea7d52e7413eb1a4f Mon Sep 17 00:00:00 2001 From: Tony Jones Date: Tue, 25 Sep 2007 02:03:03 +0200 Subject: IDE: Convert from class_device to device for ide-tape Signed-off-by: Tony Jones Cc: Gadi Oxman Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/ide/ide-tape.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 7b9181b5469d..1495792d7917 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -4724,10 +4724,8 @@ static void ide_tape_release(struct kref *kref) drive->dsc_overlap = 0; drive->driver_data = NULL; - class_device_destroy(idetape_sysfs_class, - MKDEV(IDETAPE_MAJOR, tape->minor)); - class_device_destroy(idetape_sysfs_class, - MKDEV(IDETAPE_MAJOR, tape->minor + 128)); + device_destroy(idetape_sysfs_class, MKDEV(IDETAPE_MAJOR, tape->minor)); + device_destroy(idetape_sysfs_class, MKDEV(IDETAPE_MAJOR, tape->minor + 128)); idetape_devs[tape->minor] = NULL; g->private_data = NULL; put_disk(g); @@ -4884,10 +4882,10 @@ static int ide_tape_probe(ide_drive_t *drive) idetape_setup(drive, tape, minor); - class_device_create(idetape_sysfs_class, NULL, - MKDEV(IDETAPE_MAJOR, minor), &drive->gendev, "%s", tape->name); - class_device_create(idetape_sysfs_class, NULL, - MKDEV(IDETAPE_MAJOR, minor + 128), &drive->gendev, "n%s", tape->name); + device_create(idetape_sysfs_class, &drive->gendev, + MKDEV(IDETAPE_MAJOR, minor), "%s", tape->name); + device_create(idetape_sysfs_class, &drive->gendev, + MKDEV(IDETAPE_MAJOR, minor + 128), "n%s", tape->name); g->fops = &idetape_block_ops; ide_register_region(g); -- cgit v1.2.3-59-g8ed1b From d78b03683a6f96645d265abdd5c556547dc76d70 Mon Sep 17 00:00:00 2001 From: Tony Jones Date: Tue, 25 Sep 2007 02:03:03 +0200 Subject: ISDN: Convert from class_device to device for ISDN capi Signed-off-by: Tony Jones Cc: Kay Sievers Acked-by: Karsten Keil Signed-off-by: Greg Kroah-Hartman --- drivers/isdn/capi/capi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c index f449daef3eed..23ae66c76d47 100644 --- a/drivers/isdn/capi/capi.c +++ b/drivers/isdn/capi/capi.c @@ -1544,11 +1544,11 @@ static int __init capi_init(void) return PTR_ERR(capi_class); } - class_device_create(capi_class, NULL, MKDEV(capi_major, 0), NULL, "capi"); + device_create(capi_class, NULL, MKDEV(capi_major, 0), "capi"); #ifdef CONFIG_ISDN_CAPI_MIDDLEWARE if (capinc_tty_init() < 0) { - class_device_destroy(capi_class, MKDEV(capi_major, 0)); + device_destroy(capi_class, MKDEV(capi_major, 0)); class_destroy(capi_class); unregister_chrdev(capi_major, "capi20"); return -ENOMEM; @@ -1576,7 +1576,7 @@ static void __exit capi_exit(void) { proc_exit(); - class_device_destroy(capi_class, MKDEV(capi_major, 0)); + device_destroy(capi_class, MKDEV(capi_major, 0)); class_destroy(capi_class); unregister_chrdev(capi_major, "capi20"); -- cgit v1.2.3-59-g8ed1b From 68db2bc98cc1594a1cc487755aff4340fd4f1611 Mon Sep 17 00:00:00 2001 From: Tony Jones Date: Tue, 25 Sep 2007 02:03:03 +0200 Subject: adb: Convert from class_device to device struct class_device is going away, this converts the code to use struct device instead. Signed-off-by: Tony Jones Cc: Joshua Thompson Cc: Benjamin Herrenschmidt Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/macintosh/adb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/macintosh/adb.c b/drivers/macintosh/adb.c index 5c742a526082..b7adde4324e4 100644 --- a/drivers/macintosh/adb.c +++ b/drivers/macintosh/adb.c @@ -875,5 +875,5 @@ adbdev_init(void) adb_dev_class = class_create(THIS_MODULE, "adb"); if (IS_ERR(adb_dev_class)) return; - class_device_create(adb_dev_class, NULL, MKDEV(ADB_MAJOR, 0), NULL, "adb"); + device_create(adb_dev_class, NULL, MKDEV(ADB_MAJOR, 0), "adb"); } -- cgit v1.2.3-59-g8ed1b From 0c55445f201841bfd6c658c47df8311b6722f002 Mon Sep 17 00:00:00 2001 From: Tony Jones Date: Tue, 25 Sep 2007 02:03:03 +0200 Subject: MCP_UCB1200: Convert from class_device to device struct class_device is going away, this converts the code to use struct device instead. Signed-off-by: Tony Jones Cc: Russell King Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/mfd/ucb1x00-assabet.c | 17 +++++++++-------- drivers/mfd/ucb1x00-core.c | 14 +++++++------- drivers/mfd/ucb1x00.h | 4 ++-- 3 files changed, 18 insertions(+), 17 deletions(-) diff --git a/drivers/mfd/ucb1x00-assabet.c b/drivers/mfd/ucb1x00-assabet.c index e325fa71f38b..b7c8e7813865 100644 --- a/drivers/mfd/ucb1x00-assabet.c +++ b/drivers/mfd/ucb1x00-assabet.c @@ -20,7 +20,8 @@ #include "ucb1x00.h" #define UCB1X00_ATTR(name,input)\ -static ssize_t name##_show(struct class_device *dev, char *buf) \ +static ssize_t name##_show(struct device *dev, struct device_attribute *attr, + char *buf) \ { \ struct ucb1x00 *ucb = classdev_to_ucb1x00(dev); \ int val; \ @@ -29,7 +30,7 @@ static ssize_t name##_show(struct class_device *dev, char *buf) \ ucb1x00_adc_disable(ucb); \ return sprintf(buf, "%d\n", val); \ } \ -static CLASS_DEVICE_ATTR(name,0444,name##_show,NULL) +static DEVICE_ATTR(name,0444,name##_show,NULL) UCB1X00_ATTR(vbatt, UCB_ADC_INP_AD1); UCB1X00_ATTR(vcharger, UCB_ADC_INP_AD0); @@ -37,17 +38,17 @@ UCB1X00_ATTR(batt_temp, UCB_ADC_INP_AD2); static int ucb1x00_assabet_add(struct ucb1x00_dev *dev) { - class_device_create_file(&dev->ucb->cdev, &class_device_attr_vbatt); - class_device_create_file(&dev->ucb->cdev, &class_device_attr_vcharger); - class_device_create_file(&dev->ucb->cdev, &class_device_attr_batt_temp); + device_create_file(&dev->ucb->dev, &device_attr_vbatt); + device_create_file(&dev->ucb->dev, &device_attr_vcharger); + device_create_file(&dev->ucb->dev, &device_attr_batt_temp); return 0; } static void ucb1x00_assabet_remove(struct ucb1x00_dev *dev) { - class_device_remove_file(&dev->ucb->cdev, &class_device_attr_batt_temp); - class_device_remove_file(&dev->ucb->cdev, &class_device_attr_vcharger); - class_device_remove_file(&dev->ucb->cdev, &class_device_attr_vbatt); + device_remove_file(&dev->ucb->cdev, &device_attr_batt_temp); + device_remove_file(&dev->ucb->cdev, &device_attr_vcharger); + device_remove_file(&dev->ucb->cdev, &device_attr_vbatt); } static struct ucb1x00_driver ucb1x00_assabet_driver = { diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c index e03f1bcd4f9f..f6b10dda31fd 100644 --- a/drivers/mfd/ucb1x00-core.c +++ b/drivers/mfd/ucb1x00-core.c @@ -458,7 +458,7 @@ static int ucb1x00_detect_irq(struct ucb1x00 *ucb) return probe_irq_off(mask); } -static void ucb1x00_release(struct class_device *dev) +static void ucb1x00_release(struct device *dev) { struct ucb1x00 *ucb = classdev_to_ucb1x00(dev); kfree(ucb); @@ -466,7 +466,7 @@ static void ucb1x00_release(struct class_device *dev) static struct class ucb1x00_class = { .name = "ucb1x00", - .release = ucb1x00_release, + .dev_release = ucb1x00_release, }; static int ucb1x00_probe(struct mcp *mcp) @@ -490,9 +490,9 @@ static int ucb1x00_probe(struct mcp *mcp) goto err_disable; - ucb->cdev.class = &ucb1x00_class; - ucb->cdev.dev = &mcp->attached_device; - strlcpy(ucb->cdev.class_id, "ucb1x00", sizeof(ucb->cdev.class_id)); + ucb->dev.class = &ucb1x00_class; + ucb->dev.parent = &mcp->attached_device; + strlcpy(ucb->dev.bus_id, "ucb1x00", sizeof(ucb->dev.bus_id)); spin_lock_init(&ucb->lock); spin_lock_init(&ucb->io_lock); @@ -517,7 +517,7 @@ static int ucb1x00_probe(struct mcp *mcp) mcp_set_drvdata(mcp, ucb); - ret = class_device_register(&ucb->cdev); + ret = device_register(&ucb->dev); if (ret) goto err_irq; @@ -554,7 +554,7 @@ static void ucb1x00_remove(struct mcp *mcp) mutex_unlock(&ucb1x00_mutex); free_irq(ucb->irq, ucb); - class_device_unregister(&ucb->cdev); + device_unregister(&ucb->dev); } int ucb1x00_register_driver(struct ucb1x00_driver *drv) diff --git a/drivers/mfd/ucb1x00.h b/drivers/mfd/ucb1x00.h index ca8df8072d43..a8ad8a0ed5db 100644 --- a/drivers/mfd/ucb1x00.h +++ b/drivers/mfd/ucb1x00.h @@ -120,7 +120,7 @@ struct ucb1x00 { u16 irq_fal_enbl; u16 irq_ris_enbl; struct ucb1x00_irq irq_handler[16]; - struct class_device cdev; + struct device dev; struct list_head node; struct list_head devs; }; @@ -144,7 +144,7 @@ struct ucb1x00_driver { int (*resume)(struct ucb1x00_dev *dev); }; -#define classdev_to_ucb1x00(cd) container_of(cd, struct ucb1x00, cdev) +#define classdev_to_ucb1x00(cd) container_of(cd, struct ucb1x00, dev) int ucb1x00_register_driver(struct ucb1x00_driver *); void ucb1x00_unregister_driver(struct ucb1x00_driver *); -- cgit v1.2.3-59-g8ed1b From a98894ab02bc9a3e2dc8cccab55d7ed200d3b05f Mon Sep 17 00:00:00 2001 From: Tony Jones Date: Tue, 25 Sep 2007 02:03:03 +0200 Subject: mtd: Convert from class_device to device for MTD/mtdchar struct class_device is going away, this converts the code to use struct device instead. Signed-off-by: Tony Jones Cc: David Woodhouse Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/mtd/mtdchar.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index 22ed96c4b7bd..a0cee86464ca 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -27,12 +27,10 @@ static void mtd_notify_add(struct mtd_info* mtd) if (!mtd) return; - class_device_create(mtd_class, NULL, MKDEV(MTD_CHAR_MAJOR, mtd->index*2), - NULL, "mtd%d", mtd->index); + device_create(mtd_class, NULL, MKDEV(MTD_CHAR_MAJOR, mtd->index*2), "mtd%d", mtd->index); - class_device_create(mtd_class, NULL, - MKDEV(MTD_CHAR_MAJOR, mtd->index*2+1), - NULL, "mtd%dro", mtd->index); + device_create(mtd_class, NULL, + MKDEV(MTD_CHAR_MAJOR, mtd->index*2+1), "mtd%dro", mtd->index); } static void mtd_notify_remove(struct mtd_info* mtd) @@ -40,8 +38,8 @@ static void mtd_notify_remove(struct mtd_info* mtd) if (!mtd) return; - class_device_destroy(mtd_class, MKDEV(MTD_CHAR_MAJOR, mtd->index*2)); - class_device_destroy(mtd_class, MKDEV(MTD_CHAR_MAJOR, mtd->index*2+1)); + device_destroy(mtd_class, MKDEV(MTD_CHAR_MAJOR, mtd->index*2)); + device_destroy(mtd_class, MKDEV(MTD_CHAR_MAJOR, mtd->index*2+1)); } static struct mtd_notifier notifier = { -- cgit v1.2.3-59-g8ed1b From aa2758261469374b598e2a6a2702e000a6ab2fbb Mon Sep 17 00:00:00 2001 From: Tony Jones Date: Tue, 25 Sep 2007 02:03:03 +0200 Subject: paride: Convert from class_device to device for block/paride struct class_device is going away, this converts the code to use struct device instead. Signed-off-by: Tony Jones Cc: Tim Waugh Cc: Jens Axboe Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/block/paride/pg.c | 6 +++--- drivers/block/paride/pt.c | 12 ++++++------ 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/block/paride/pg.c b/drivers/block/paride/pg.c index d89e7d32a3b6..ab86e23ddc69 100644 --- a/drivers/block/paride/pg.c +++ b/drivers/block/paride/pg.c @@ -676,8 +676,8 @@ static int __init pg_init(void) for (unit = 0; unit < PG_UNITS; unit++) { struct pg *dev = &devices[unit]; if (dev->present) - class_device_create(pg_class, NULL, MKDEV(major, unit), - NULL, "pg%u", unit); + device_create(pg_class, NULL, MKDEV(major, unit), + "pg%u", unit); } err = 0; goto out; @@ -695,7 +695,7 @@ static void __exit pg_exit(void) for (unit = 0; unit < PG_UNITS; unit++) { struct pg *dev = &devices[unit]; if (dev->present) - class_device_destroy(pg_class, MKDEV(major, unit)); + device_destroy(pg_class, MKDEV(major, unit)); } class_destroy(pg_class); unregister_chrdev(major, name); diff --git a/drivers/block/paride/pt.c b/drivers/block/paride/pt.c index b91accf12656..76096cad798f 100644 --- a/drivers/block/paride/pt.c +++ b/drivers/block/paride/pt.c @@ -972,10 +972,10 @@ static int __init pt_init(void) for (unit = 0; unit < PT_UNITS; unit++) if (pt[unit].present) { - class_device_create(pt_class, NULL, MKDEV(major, unit), - NULL, "pt%d", unit); - class_device_create(pt_class, NULL, MKDEV(major, unit + 128), - NULL, "pt%dn", unit); + device_create(pt_class, NULL, MKDEV(major, unit), + "pt%d", unit); + device_create(pt_class, NULL, MKDEV(major, unit + 128), + "pt%dn", unit); } goto out; @@ -990,8 +990,8 @@ static void __exit pt_exit(void) int unit; for (unit = 0; unit < PT_UNITS; unit++) if (pt[unit].present) { - class_device_destroy(pt_class, MKDEV(major, unit)); - class_device_destroy(pt_class, MKDEV(major, unit + 128)); + device_destroy(pt_class, MKDEV(major, unit)); + device_destroy(pt_class, MKDEV(major, unit + 128)); } class_destroy(pt_class); unregister_chrdev(major, name); -- cgit v1.2.3-59-g8ed1b From 6013c12be8313b3205b41912d965b03f3b06147d Mon Sep 17 00:00:00 2001 From: Tony Jones Date: Tue, 25 Sep 2007 02:03:03 +0200 Subject: pktcdvd: Convert from class_device to device for block/pktcdvd struct class_device is going away, this converts the code to use struct device instead. Signed-off-by: Tony Jones Cc: Peter Osterlund Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/block/pktcdvd.c | 16 +++++++--------- include/linux/pktcdvd.h | 2 +- 2 files changed, 8 insertions(+), 10 deletions(-) diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index 3535ef896677..17da6999bef0 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -301,18 +301,16 @@ static struct kobj_type kobj_pkt_type_wqueue = { static void pkt_sysfs_dev_new(struct pktcdvd_device *pd) { if (class_pktcdvd) { - pd->clsdev = class_device_create(class_pktcdvd, - NULL, pd->pkt_dev, - NULL, "%s", pd->name); - if (IS_ERR(pd->clsdev)) - pd->clsdev = NULL; + pd->dev = device_create(class_pktcdvd, NULL, pd->pkt_dev, "%s", pd->name); + if (IS_ERR(pd->dev)) + pd->dev = NULL; } - if (pd->clsdev) { + if (pd->dev) { pd->kobj_stat = pkt_kobj_create(pd, "stat", - &pd->clsdev->kobj, + &pd->dev->kobj, &kobj_pkt_type_stat); pd->kobj_wqueue = pkt_kobj_create(pd, "write_queue", - &pd->clsdev->kobj, + &pd->dev->kobj, &kobj_pkt_type_wqueue); } } @@ -322,7 +320,7 @@ static void pkt_sysfs_dev_remove(struct pktcdvd_device *pd) pkt_kobj_remove(pd->kobj_stat); pkt_kobj_remove(pd->kobj_wqueue); if (class_pktcdvd) - class_device_destroy(class_pktcdvd, pd->pkt_dev); + device_destroy(class_pktcdvd, pd->pkt_dev); } diff --git a/include/linux/pktcdvd.h b/include/linux/pktcdvd.h index 5ea4f05683f6..04b4d7330e6d 100644 --- a/include/linux/pktcdvd.h +++ b/include/linux/pktcdvd.h @@ -290,7 +290,7 @@ struct pktcdvd_device int write_congestion_off; int write_congestion_on; - struct class_device *clsdev; /* sysfs pktcdvd[0-7] class dev */ + struct device *dev; /* sysfs pktcdvd[0-7] dev */ struct pktcdvd_kobj *kobj_stat; /* sysfs pktcdvd[0-7]/stat/ */ struct pktcdvd_kobj *kobj_wqueue; /* sysfs pktcdvd[0-7]/write_queue/ */ -- cgit v1.2.3-59-g8ed1b From 7dd817d083b6fc103b9ea4f2b4f4a1c6a09e29a0 Mon Sep 17 00:00:00 2001 From: Tony Jones Date: Tue, 25 Sep 2007 02:03:03 +0200 Subject: tifm: Convert from class_device to device for TI flash media Signed-off-by: Tony Jones Cc: Alex Dubov Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/misc/tifm_7xx1.c | 4 ++-- drivers/misc/tifm_core.c | 24 ++++++++++++------------ include/linux/tifm.h | 2 +- 3 files changed, 15 insertions(+), 15 deletions(-) diff --git a/drivers/misc/tifm_7xx1.c b/drivers/misc/tifm_7xx1.c index 2d1b3df95c5b..54380da343a5 100644 --- a/drivers/misc/tifm_7xx1.c +++ b/drivers/misc/tifm_7xx1.c @@ -149,7 +149,7 @@ static void tifm_7xx1_switch_media(struct work_struct *work) socket_change_set = fm->socket_change_set; fm->socket_change_set = 0; - dev_dbg(fm->cdev.dev, "checking media set %x\n", + dev_dbg(fm->dev.parent, "checking media set %x\n", socket_change_set); if (!socket_change_set) { @@ -164,7 +164,7 @@ static void tifm_7xx1_switch_media(struct work_struct *work) if (sock) { printk(KERN_INFO "%s : demand removing card from socket %u:%u\n", - fm->cdev.class_id, fm->id, cnt); + fm->dev.bus_id, fm->id, cnt); fm->sockets[cnt] = NULL; sock_addr = sock->addr; spin_unlock_irqrestore(&fm->lock, flags); diff --git a/drivers/misc/tifm_core.c b/drivers/misc/tifm_core.c index 8f77949f93dd..97544052e768 100644 --- a/drivers/misc/tifm_core.c +++ b/drivers/misc/tifm_core.c @@ -160,16 +160,16 @@ static struct bus_type tifm_bus_type = { .resume = tifm_device_resume }; -static void tifm_free(struct class_device *cdev) +static void tifm_free(struct device *dev) { - struct tifm_adapter *fm = container_of(cdev, struct tifm_adapter, cdev); + struct tifm_adapter *fm = container_of(dev, struct tifm_adapter, dev); kfree(fm); } static struct class tifm_adapter_class = { .name = "tifm_adapter", - .release = tifm_free + .dev_release = tifm_free }; struct tifm_adapter *tifm_alloc_adapter(unsigned int num_sockets, @@ -180,9 +180,9 @@ struct tifm_adapter *tifm_alloc_adapter(unsigned int num_sockets, fm = kzalloc(sizeof(struct tifm_adapter) + sizeof(struct tifm_dev*) * num_sockets, GFP_KERNEL); if (fm) { - fm->cdev.class = &tifm_adapter_class; - fm->cdev.dev = dev; - class_device_initialize(&fm->cdev); + fm->dev.class = &tifm_adapter_class; + fm->dev.parent = dev; + device_initialize(&fm->dev); spin_lock_init(&fm->lock); fm->num_sockets = num_sockets; } @@ -203,8 +203,8 @@ int tifm_add_adapter(struct tifm_adapter *fm) if (rc) return rc; - snprintf(fm->cdev.class_id, BUS_ID_SIZE, "tifm%u", fm->id); - rc = class_device_add(&fm->cdev); + snprintf(fm->dev.bus_id, BUS_ID_SIZE, "tifm%u", fm->id); + rc = device_add(&fm->dev); if (rc) { spin_lock(&tifm_adapter_lock); idr_remove(&tifm_adapter_idr, fm->id); @@ -228,13 +228,13 @@ void tifm_remove_adapter(struct tifm_adapter *fm) spin_lock(&tifm_adapter_lock); idr_remove(&tifm_adapter_idr, fm->id); spin_unlock(&tifm_adapter_lock); - class_device_del(&fm->cdev); + device_del(&fm->dev); } EXPORT_SYMBOL(tifm_remove_adapter); void tifm_free_adapter(struct tifm_adapter *fm) { - class_device_put(&fm->cdev); + put_device(&fm->dev); } EXPORT_SYMBOL(tifm_free_adapter); @@ -261,9 +261,9 @@ struct tifm_dev *tifm_alloc_device(struct tifm_adapter *fm, unsigned int id, sock->card_event = tifm_dummy_event; sock->data_event = tifm_dummy_event; - sock->dev.parent = fm->cdev.dev; + sock->dev.parent = fm->dev.parent; sock->dev.bus = &tifm_bus_type; - sock->dev.dma_mask = fm->cdev.dev->dma_mask; + sock->dev.dma_mask = fm->dev.parent->dma_mask; sock->dev.release = tifm_free_device; snprintf(sock->dev.bus_id, BUS_ID_SIZE, diff --git a/include/linux/tifm.h b/include/linux/tifm.h index 6b3a31805c72..2096b76d0cee 100644 --- a/include/linux/tifm.h +++ b/include/linux/tifm.h @@ -120,7 +120,7 @@ struct tifm_adapter { struct completion *finish_me; struct work_struct media_switcher; - struct class_device cdev; + struct device dev; void (*eject)(struct tifm_adapter *fm, struct tifm_dev *sock); -- cgit v1.2.3-59-g8ed1b From 02ff82cac7ee7351d2649c4a3568f12e4e0fe534 Mon Sep 17 00:00:00 2001 From: Tony Jones Date: Tue, 25 Sep 2007 02:03:03 +0200 Subject: cosa: Convert from class_device to device for cosa sync driver struct class_device is going away, this converts the code to use struct device instead. Signed-off-by: Tony Jones Cc: Jan "Yenya" Kasprzak Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/net/wan/cosa.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c index ff37bf437a99..1d706eae3052 100644 --- a/drivers/net/wan/cosa.c +++ b/drivers/net/wan/cosa.c @@ -395,8 +395,7 @@ static int __init cosa_init(void) goto out_chrdev; } for (i=0; i Date: Mon, 15 Oct 2007 15:01:24 -0700 Subject: ecryptfs: clean up attribute mess It isn't that hard to add simple kset attributes, so don't go through all the gyrations of creating your own object type and show and store functions. Just use the functions that are already present. This makes things much simpler. Note, the version_str string violates the "one value per file" rule for sysfs. I suggest changing this now (individual files per type supported is one suggested way.) Cc: Michael A. Halcrow Cc: Michael C. Thompson Cc: Tyler Hicks Signed-off-by: Greg Kroah-Hartman --- fs/ecryptfs/main.c | 85 ++++++++++++------------------------------------------ 1 file changed, 18 insertions(+), 67 deletions(-) diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c index e5580bcb923a..f9f32472c505 100644 --- a/fs/ecryptfs/main.c +++ b/fs/ecryptfs/main.c @@ -734,58 +734,14 @@ static int ecryptfs_init_kmem_caches(void) return 0; } -struct ecryptfs_obj { - char *name; - struct list_head slot_list; - struct kobject kobj; -}; - -struct ecryptfs_attribute { - struct attribute attr; - ssize_t(*show) (struct ecryptfs_obj *, char *); - ssize_t(*store) (struct ecryptfs_obj *, const char *, size_t); -}; - -static ssize_t -ecryptfs_attr_store(struct kobject *kobj, - struct attribute *attr, const char *buf, size_t len) -{ - struct ecryptfs_obj *obj = container_of(kobj, struct ecryptfs_obj, - kobj); - struct ecryptfs_attribute *attribute = - container_of(attr, struct ecryptfs_attribute, attr); - - return (attribute->store ? attribute->store(obj, buf, len) : 0); -} - -static ssize_t -ecryptfs_attr_show(struct kobject *kobj, struct attribute *attr, char *buf) -{ - struct ecryptfs_obj *obj = container_of(kobj, struct ecryptfs_obj, - kobj); - struct ecryptfs_attribute *attribute = - container_of(attr, struct ecryptfs_attribute, attr); - - return (attribute->show ? attribute->show(obj, buf) : 0); -} - -static struct sysfs_ops ecryptfs_sysfs_ops = { - .show = ecryptfs_attr_show, - .store = ecryptfs_attr_store -}; +static decl_subsys(ecryptfs, NULL, NULL); -static struct kobj_type ecryptfs_ktype = { - .sysfs_ops = &ecryptfs_sysfs_ops -}; - -static decl_subsys(ecryptfs, &ecryptfs_ktype, NULL); - -static ssize_t version_show(struct ecryptfs_obj *obj, char *buff) +static ssize_t version_show(struct kset *kset, char *buff) { return snprintf(buff, PAGE_SIZE, "%d\n", ECRYPTFS_VERSIONING_MASK); } -static struct ecryptfs_attribute sysfs_attr_version = __ATTR_RO(version); +static struct subsys_attribute version_attr = __ATTR_RO(version); static struct ecryptfs_version_str_map_elem { u32 flag; @@ -799,7 +755,7 @@ static struct ecryptfs_version_str_map_elem { {ECRYPTFS_VERSIONING_MULTKEY, "multiple keys per file"} }; -static ssize_t version_str_show(struct ecryptfs_obj *obj, char *buff) +static ssize_t version_str_show(struct kset *kset, char *buff) { int i; int remaining = PAGE_SIZE; @@ -826,7 +782,17 @@ out: return total_written; } -static struct ecryptfs_attribute sysfs_attr_version_str = __ATTR_RO(version_str); +static struct subsys_attribute version_attr_str = __ATTR_RO(version_str); + +static struct attribute *attributes[] = { + &version_attr.attr, + &version_attr_str.attr, + NULL, +}; + +static struct attribute_group attr_group = { + .attrs = attributes, +}; static int do_sysfs_registration(void) { @@ -838,23 +804,11 @@ static int do_sysfs_registration(void) "Unable to register ecryptfs sysfs subsystem\n"); goto out; } - rc = sysfs_create_file(&ecryptfs_subsys.kobj, - &sysfs_attr_version.attr); + rc = sysfs_create_group(&ecryptfs_subsys.kobj, &attr_group); if (rc) { printk(KERN_ERR - "Unable to create ecryptfs version attribute\n"); + "Unable to create ecryptfs version attributes\n"); subsystem_unregister(&ecryptfs_subsys); - goto out; - } - rc = sysfs_create_file(&ecryptfs_subsys.kobj, - &sysfs_attr_version_str.attr); - if (rc) { - printk(KERN_ERR - "Unable to create ecryptfs version_str attribute\n"); - sysfs_remove_file(&ecryptfs_subsys.kobj, - &sysfs_attr_version.attr); - subsystem_unregister(&ecryptfs_subsys); - goto out; } out: return rc; @@ -862,10 +816,7 @@ out: static void do_sysfs_unregistration(void) { - sysfs_remove_file(&ecryptfs_subsys.kobj, - &sysfs_attr_version.attr); - sysfs_remove_file(&ecryptfs_subsys.kobj, - &sysfs_attr_version_str.attr); + sysfs_remove_group(&ecryptfs_subsys.kobj, &attr_group); subsystem_unregister(&ecryptfs_subsys); } -- cgit v1.2.3-59-g8ed1b From 7b8712e563df4fefc25d3107fa3fb3abb7331ff4 Mon Sep 17 00:00:00 2001 From: Emil Medve Date: Tue, 30 Oct 2007 14:37:14 -0500 Subject: driver core: Make the dev_*() family of macros in device.h complete Removed duplicates defined elsewhere Signed-off-by: Emil Medve Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/chips/isp1301_omap.c | 6 ------ drivers/isdn/gigaset/gigaset.h | 6 ------ include/linux/device.h | 24 +++++++++++++++--------- 3 files changed, 15 insertions(+), 21 deletions(-) diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c index b767603a07ba..ebfbb2947ae6 100644 --- a/drivers/i2c/chips/isp1301_omap.c +++ b/drivers/i2c/chips/isp1301_omap.c @@ -259,12 +259,6 @@ static inline const char *state_name(struct isp1301 *isp) return state_string(isp->otg.state); } -#ifdef VERBOSE -#define dev_vdbg dev_dbg -#else -#define dev_vdbg(dev, fmt, arg...) do{}while(0) -#endif - /*-------------------------------------------------------------------------*/ /* NOTE: some of this ISP1301 setup is specific to H2 boards; diff --git a/drivers/isdn/gigaset/gigaset.h b/drivers/isdn/gigaset/gigaset.h index a0317abaeb11..02bdaf22d7ea 100644 --- a/drivers/isdn/gigaset/gigaset.h +++ b/drivers/isdn/gigaset/gigaset.h @@ -106,12 +106,6 @@ enum debuglevel { activated */ }; -/* missing from linux/device.h ... */ -#ifndef dev_notice -#define dev_notice(dev, format, arg...) \ - dev_printk(KERN_NOTICE , dev , format , ## arg) -#endif - /* Kernel message macros for situations where dev_printk and friends cannot be * used for lack of reliable access to a device structure. * linux/usb.h already contains these but in an obsolete form which clutters diff --git a/include/linux/device.h b/include/linux/device.h index cf4ae5c5d193..dbbbe89e7267 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -565,6 +565,21 @@ extern const char *dev_driver_string(struct device *dev); #define dev_printk(level, dev, format, arg...) \ printk(level "%s %s: " format , dev_driver_string(dev) , (dev)->bus_id , ## arg) +#define dev_emerg(dev, format, arg...) \ + dev_printk(KERN_EMERG , dev , format , ## arg) +#define dev_alert(dev, format, arg...) \ + dev_printk(KERN_ALERT , dev , format , ## arg) +#define dev_crit(dev, format, arg...) \ + dev_printk(KERN_CRIT , dev , format , ## arg) +#define dev_err(dev, format, arg...) \ + dev_printk(KERN_ERR , dev , format , ## arg) +#define dev_warn(dev, format, arg...) \ + dev_printk(KERN_WARNING , dev , format , ## arg) +#define dev_notice(dev, format, arg...) \ + dev_printk(KERN_NOTICE , dev , format , ## arg) +#define dev_info(dev, format, arg...) \ + dev_printk(KERN_INFO , dev , format , ## arg) + #ifdef DEBUG #define dev_dbg(dev, format, arg...) \ dev_printk(KERN_DEBUG , dev , format , ## arg) @@ -586,15 +601,6 @@ dev_vdbg(struct device * dev, const char * fmt, ...) } #endif -#define dev_err(dev, format, arg...) \ - dev_printk(KERN_ERR , dev , format , ## arg) -#define dev_info(dev, format, arg...) \ - dev_printk(KERN_INFO , dev , format , ## arg) -#define dev_warn(dev, format, arg...) \ - dev_printk(KERN_WARNING , dev , format , ## arg) -#define dev_notice(dev, format, arg...) \ - dev_printk(KERN_NOTICE , dev , format , ## arg) - /* Create alias, so I can be autoloaded. */ #define MODULE_ALIAS_CHARDEV(major,minor) \ MODULE_ALIAS("char-major-" __stringify(major) "-" __stringify(minor)) -- cgit v1.2.3-59-g8ed1b From 2f90a851800e88436873c8d27238cf219b9ef48e Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Thu, 1 Nov 2007 20:20:52 +0100 Subject: sysfs: create optimal relative symlink targets Instead of walking from the source down to the root of sysfs, and back to the target, we stop at the first directory the source and the target share. This link: /devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0/ep_81 pointed to: ../../../../../devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0/usb_endpoint/usbdev2.1_ep81 now it just points to: usb_endpoint/usbdev1.1_ep81 Thanks to Denis Cheng for bringing this up, and sending the initial patch. CC: Denis Cheng Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- fs/sysfs/symlink.c | 88 ++++++++++++++++++++++++++---------------------------- 1 file changed, 42 insertions(+), 46 deletions(-) diff --git a/fs/sysfs/symlink.c b/fs/sysfs/symlink.c index 3eac20c63c41..5f66c4466151 100644 --- a/fs/sysfs/symlink.c +++ b/fs/sysfs/symlink.c @@ -19,39 +19,6 @@ #include "sysfs.h" -static int object_depth(struct sysfs_dirent *sd) -{ - int depth = 0; - - for (; sd->s_parent; sd = sd->s_parent) - depth++; - - return depth; -} - -static int object_path_length(struct sysfs_dirent * sd) -{ - int length = 1; - - for (; sd->s_parent; sd = sd->s_parent) - length += strlen(sd->s_name) + 1; - - return length; -} - -static void fill_object_path(struct sysfs_dirent *sd, char *buffer, int length) -{ - --length; - for (; sd->s_parent; sd = sd->s_parent) { - int cur = strlen(sd->s_name); - - /* back up enough to print this bus id with '/' */ - length -= cur; - strncpy(buffer + length, sd->s_name, cur); - *(buffer + --length) = '/'; - } -} - /** * sysfs_create_link - create symlink between two objects. * @kobj: object whose directory we're creating the link in. @@ -112,7 +79,6 @@ int sysfs_create_link(struct kobject * kobj, struct kobject * target, const char return error; } - /** * sysfs_remove_link - remove symlink in object's directory. * @kobj: object we're acting for. @@ -124,24 +90,54 @@ void sysfs_remove_link(struct kobject * kobj, const char * name) sysfs_hash_and_remove(kobj->sd, name); } -static int sysfs_get_target_path(struct sysfs_dirent * parent_sd, - struct sysfs_dirent * target_sd, char *path) +static int sysfs_get_target_path(struct sysfs_dirent *parent_sd, + struct sysfs_dirent *target_sd, char *path) { - char * s; - int depth, size; + struct sysfs_dirent *base, *sd; + char *s = path; + int len = 0; + + /* go up to the root, stop at the base */ + base = parent_sd; + while (base->s_parent) { + sd = target_sd->s_parent; + while (sd->s_parent && base != sd) + sd = sd->s_parent; + + if (base == sd) + break; + + strcpy(s, "../"); + s += 3; + base = base->s_parent; + } + + /* determine end of target string for reverse fillup */ + sd = target_sd; + while (sd->s_parent && sd != base) { + len += strlen(sd->s_name) + 1; + sd = sd->s_parent; + } - depth = object_depth(parent_sd); - size = object_path_length(target_sd) + depth * 3 - 1; - if (size > PATH_MAX) + /* check limits */ + if (len < 2) + return -EINVAL; + len--; + if ((s - path) + len > PATH_MAX) return -ENAMETOOLONG; - pr_debug("%s: depth = %d, size = %d\n", __FUNCTION__, depth, size); + /* reverse fillup of target string from target to base */ + sd = target_sd; + while (sd->s_parent && sd != base) { + int slen = strlen(sd->s_name); - for (s = path; depth--; s += 3) - strcpy(s,"../"); + len -= slen; + strncpy(s + len, sd->s_name, slen); + if (len) + s[--len] = '/'; - fill_object_path(target_sd, path, size); - pr_debug("%s: path = '%s'\n", __FUNCTION__, path); + sd = sd->s_parent; + } return 0; } -- cgit v1.2.3-59-g8ed1b From d7b37889650bb316f5c4ad4b0569ba897120d70d Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 21 Nov 2007 14:55:19 -0800 Subject: sysfs: remove SPIN_LOCK_UNLOCKED SPIN_LOCK_UNLOCKED is deprecated, use DEFINE_SPINLOCK instead Signed-off-by: Jiri Slaby Signed-off-by: Andrew Morton Cc: Tejun Heo Signed-off-by: Greg Kroah-Hartman --- fs/sysfs/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c index 4045bdcc4b33..09a0611b3364 100644 --- a/fs/sysfs/file.c +++ b/fs/sysfs/file.c @@ -66,7 +66,7 @@ static struct sysfs_ops subsys_sysfs_ops = { * sysfs_dirent->s_attr.open points to sysfs_open_dirent. s_attr.open * is protected by sysfs_open_dirent_lock. */ -static spinlock_t sysfs_open_dirent_lock = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(sysfs_open_dirent_lock); struct sysfs_open_dirent { atomic_t refcnt; -- cgit v1.2.3-59-g8ed1b From a045171f875cd61f690981a78ab98fbd137c938b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 3 Dec 2007 21:16:20 -0700 Subject: kobject: convert ibmasm to use kref, not kobject MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The IBM asm driver is using a kobject only for reference counting, nothing else. So switch it to use a kref instead, which is all that is needed, and is much smaller. Cc: Max Asböck Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/misc/ibmasm/command.c | 12 +++--------- drivers/misc/ibmasm/ibmasm.h | 10 ++++++---- 2 files changed, 9 insertions(+), 13 deletions(-) diff --git a/drivers/misc/ibmasm/command.c b/drivers/misc/ibmasm/command.c index 6497872df524..1a0e7978226a 100644 --- a/drivers/misc/ibmasm/command.c +++ b/drivers/misc/ibmasm/command.c @@ -26,11 +26,6 @@ #include "lowlevel.h" static void exec_next_command(struct service_processor *sp); -static void free_command(struct kobject *kobj); - -static struct kobj_type ibmasm_cmd_kobj_type = { - .release = free_command, -}; static atomic_t command_count = ATOMIC_INIT(0); @@ -53,8 +48,7 @@ struct command *ibmasm_new_command(struct service_processor *sp, size_t buffer_s } cmd->buffer_size = buffer_size; - kobject_init(&cmd->kobj); - cmd->kobj.ktype = &ibmasm_cmd_kobj_type; + kref_init(&cmd->kref); cmd->lock = &sp->lock; cmd->status = IBMASM_CMD_PENDING; @@ -67,9 +61,9 @@ struct command *ibmasm_new_command(struct service_processor *sp, size_t buffer_s return cmd; } -static void free_command(struct kobject *kobj) +void ibmasm_free_command(struct kref *kref) { - struct command *cmd = to_command(kobj); + struct command *cmd = to_command(kref); list_del(&cmd->queue_node); atomic_dec(&command_count); diff --git a/drivers/misc/ibmasm/ibmasm.h b/drivers/misc/ibmasm/ibmasm.h index de860bc6d3f5..4d8a4e248b34 100644 --- a/drivers/misc/ibmasm/ibmasm.h +++ b/drivers/misc/ibmasm/ibmasm.h @@ -31,6 +31,7 @@ #include #include #include +#include #include #include @@ -92,24 +93,25 @@ struct command { unsigned char *buffer; size_t buffer_size; int status; - struct kobject kobj; + struct kref kref; spinlock_t *lock; }; -#define to_command(c) container_of(c, struct command, kobj) +#define to_command(c) container_of(c, struct command, kref) +void ibmasm_free_command(struct kref *kref); static inline void command_put(struct command *cmd) { unsigned long flags; spinlock_t *lock = cmd->lock; spin_lock_irqsave(lock, flags); - kobject_put(&cmd->kobj); + kref_put(&cmd->kref, ibmasm_free_command); spin_unlock_irqrestore(lock, flags); } static inline void command_get(struct command *cmd) { - kobject_get(&cmd->kobj); + kref_get(&cmd->kref); } -- cgit v1.2.3-59-g8ed1b From 12b20ded6f980d9161b1c6b062560b65a7295e1c Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 28 Nov 2007 10:46:22 -0800 Subject: kobject: convert hvc_console to use kref, not kobject hvc_console is using a kobject only for reference counting, nothing else. So switch it to use a kref instead, which is all that is needed, and is much smaller. Cc: Anton Blanchard Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Ryan S. Arnold Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/char/hvc_console.c | 80 +++++++++++++++++++--------------------------- 1 file changed, 33 insertions(+), 47 deletions(-) diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c index 8252f8668538..480fae29c9b2 100644 --- a/drivers/char/hvc_console.c +++ b/drivers/char/hvc_console.c @@ -27,7 +27,7 @@ #include #include #include -#include +#include #include #include #include @@ -89,7 +89,7 @@ struct hvc_struct { int irq_requested; int irq; struct list_head next; - struct kobject kobj; /* ref count & hvc_struct lifetime */ + struct kref kref; /* ref count & hvc_struct lifetime */ }; /* dynamic list of hvc_struct instances */ @@ -110,7 +110,7 @@ static int last_hvc = -1; /* * Do not call this function with either the hvc_structs_lock or the hvc_struct - * lock held. If successful, this function increments the kobject reference + * lock held. If successful, this function increments the kref reference * count against the target hvc_struct so it should be released when finished. */ static struct hvc_struct *hvc_get_by_index(int index) @@ -123,7 +123,7 @@ static struct hvc_struct *hvc_get_by_index(int index) list_for_each_entry(hp, &hvc_structs, next) { spin_lock_irqsave(&hp->lock, flags); if (hp->index == index) { - kobject_get(&hp->kobj); + kref_get(&hp->kref); spin_unlock_irqrestore(&hp->lock, flags); spin_unlock(&hvc_structs_lock); return hp; @@ -242,6 +242,23 @@ static int __init hvc_console_init(void) } console_initcall(hvc_console_init); +/* callback when the kboject ref count reaches zero. */ +static void destroy_hvc_struct(struct kref *kref) +{ + struct hvc_struct *hp = container_of(kref, struct hvc_struct, kref); + unsigned long flags; + + spin_lock(&hvc_structs_lock); + + spin_lock_irqsave(&hp->lock, flags); + list_del(&(hp->next)); + spin_unlock_irqrestore(&hp->lock, flags); + + spin_unlock(&hvc_structs_lock); + + kfree(hp); +} + /* * hvc_instantiate() is an early console discovery method which locates * consoles * prior to the vio subsystem discovering them. Hotplugged @@ -261,7 +278,7 @@ int hvc_instantiate(uint32_t vtermno, int index, struct hv_ops *ops) /* make sure no no tty has been registered in this index */ hp = hvc_get_by_index(index); if (hp) { - kobject_put(&hp->kobj); + kref_put(&hp->kref, destroy_hvc_struct); return -1; } @@ -318,9 +335,8 @@ static int hvc_open(struct tty_struct *tty, struct file * filp) unsigned long flags; int irq = 0; int rc = 0; - struct kobject *kobjp; - /* Auto increments kobject reference if found. */ + /* Auto increments kref reference if found. */ if (!(hp = hvc_get_by_index(tty->index))) return -ENODEV; @@ -341,8 +357,6 @@ static int hvc_open(struct tty_struct *tty, struct file * filp) if (irq) hp->irq_requested = 1; - kobjp = &hp->kobj; - spin_unlock_irqrestore(&hp->lock, flags); /* check error, fallback to non-irq */ if (irq) @@ -352,7 +366,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp) * If the request_irq() fails and we return an error. The tty layer * will call hvc_close() after a failed open but we don't want to clean * up there so we'll clean up here and clear out the previously set - * tty fields and return the kobject reference. + * tty fields and return the kref reference. */ if (rc) { spin_lock_irqsave(&hp->lock, flags); @@ -360,7 +374,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp) hp->irq_requested = 0; spin_unlock_irqrestore(&hp->lock, flags); tty->driver_data = NULL; - kobject_put(kobjp); + kref_put(&hp->kref, destroy_hvc_struct); printk(KERN_ERR "hvc_open: request_irq failed with rc %d.\n", rc); } /* Force wakeup of the polling thread */ @@ -372,7 +386,6 @@ static int hvc_open(struct tty_struct *tty, struct file * filp) static void hvc_close(struct tty_struct *tty, struct file * filp) { struct hvc_struct *hp; - struct kobject *kobjp; int irq = 0; unsigned long flags; @@ -382,7 +395,7 @@ static void hvc_close(struct tty_struct *tty, struct file * filp) /* * No driver_data means that this close was issued after a failed * hvc_open by the tty layer's release_dev() function and we can just - * exit cleanly because the kobject reference wasn't made. + * exit cleanly because the kref reference wasn't made. */ if (!tty->driver_data) return; @@ -390,7 +403,6 @@ static void hvc_close(struct tty_struct *tty, struct file * filp) hp = tty->driver_data; spin_lock_irqsave(&hp->lock, flags); - kobjp = &hp->kobj; if (--hp->count == 0) { if (hp->irq_requested) irq = hp->irq; @@ -417,7 +429,7 @@ static void hvc_close(struct tty_struct *tty, struct file * filp) spin_unlock_irqrestore(&hp->lock, flags); } - kobject_put(kobjp); + kref_put(&hp->kref, destroy_hvc_struct); } static void hvc_hangup(struct tty_struct *tty) @@ -426,7 +438,6 @@ static void hvc_hangup(struct tty_struct *tty) unsigned long flags; int irq = 0; int temp_open_count; - struct kobject *kobjp; if (!hp) return; @@ -443,7 +454,6 @@ static void hvc_hangup(struct tty_struct *tty) return; } - kobjp = &hp->kobj; temp_open_count = hp->count; hp->count = 0; hp->n_outbuf = 0; @@ -457,7 +467,7 @@ static void hvc_hangup(struct tty_struct *tty) free_irq(irq, hp); while(temp_open_count) { --temp_open_count; - kobject_put(kobjp); + kref_put(&hp->kref, destroy_hvc_struct); } } @@ -729,27 +739,6 @@ static const struct tty_operations hvc_ops = { .chars_in_buffer = hvc_chars_in_buffer, }; -/* callback when the kboject ref count reaches zero. */ -static void destroy_hvc_struct(struct kobject *kobj) -{ - struct hvc_struct *hp = container_of(kobj, struct hvc_struct, kobj); - unsigned long flags; - - spin_lock(&hvc_structs_lock); - - spin_lock_irqsave(&hp->lock, flags); - list_del(&(hp->next)); - spin_unlock_irqrestore(&hp->lock, flags); - - spin_unlock(&hvc_structs_lock); - - kfree(hp); -} - -static struct kobj_type hvc_kobj_type = { - .release = destroy_hvc_struct, -}; - struct hvc_struct __devinit *hvc_alloc(uint32_t vtermno, int irq, struct hv_ops *ops, int outbuf_size) { @@ -776,8 +765,7 @@ struct hvc_struct __devinit *hvc_alloc(uint32_t vtermno, int irq, hp->outbuf_size = outbuf_size; hp->outbuf = &((char *)hp)[ALIGN(sizeof(*hp), sizeof(long))]; - kobject_init(&hp->kobj); - hp->kobj.ktype = &hvc_kobj_type; + kref_init(&hp->kref); spin_lock_init(&hp->lock); spin_lock(&hvc_structs_lock); @@ -806,12 +794,10 @@ struct hvc_struct __devinit *hvc_alloc(uint32_t vtermno, int irq, int __devexit hvc_remove(struct hvc_struct *hp) { unsigned long flags; - struct kobject *kobjp; struct tty_struct *tty; spin_lock_irqsave(&hp->lock, flags); tty = hp->tty; - kobjp = &hp->kobj; if (hp->index < MAX_NR_HVC_CONSOLES) vtermnos[hp->index] = -1; @@ -821,12 +807,12 @@ int __devexit hvc_remove(struct hvc_struct *hp) spin_unlock_irqrestore(&hp->lock, flags); /* - * We 'put' the instance that was grabbed when the kobject instance - * was initialized using kobject_init(). Let the last holder of this - * kobject cause it to be removed, which will probably be the tty_hangup + * We 'put' the instance that was grabbed when the kref instance + * was initialized using kref_init(). Let the last holder of this + * kref cause it to be removed, which will probably be the tty_hangup * below. */ - kobject_put(kobjp); + kref_put(&hp->kref, destroy_hvc_struct); /* * This function call will auto chain call hvc_hangup. The tty should -- cgit v1.2.3-59-g8ed1b From f7eb12c626d4375faf03039261546bd19c1325fd Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 28 Nov 2007 10:46:22 -0800 Subject: kobject: convert hvcs to use kref, not kobject hvcs is using a kobject only for reference counting, nothing else. So switch it to use a kref instead, which is all that is needed, and is much smaller. Cc: Anton Blanchard Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Ryan S. Arnold Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/char/hvcs.c | 78 +++++++++++++++++------------------------------------ 1 file changed, 25 insertions(+), 53 deletions(-) diff --git a/drivers/char/hvcs.c b/drivers/char/hvcs.c index 69d8866de783..fd7559084b82 100644 --- a/drivers/char/hvcs.c +++ b/drivers/char/hvcs.c @@ -57,11 +57,7 @@ * rescanning partner information upon a user's request. * * Each vty-server, prior to being exposed to this driver is reference counted - * using the 2.6 Linux kernel kobject construct. This kobject is also used by - * the vio bus to provide a vio device sysfs entry that this driver attaches - * device specific attributes to, including partner information. The vio bus - * framework also provides a sysfs entry for each vio driver. The hvcs driver - * provides driver attributes in this entry. + * using the 2.6 Linux kernel kref construct. * * For direction on installation and usage of this driver please reference * Documentation/powerpc/hvcs.txt. @@ -71,7 +67,7 @@ #include #include #include -#include +#include #include #include #include @@ -293,12 +289,12 @@ struct hvcs_struct { int chars_in_buffer; /* - * Any variable below the kobject is valid before a tty is connected and + * Any variable below the kref is valid before a tty is connected and * stays valid after the tty is disconnected. These shouldn't be * whacked until the koject refcount reaches zero though some entries * may be changed via sysfs initiatives. */ - struct kobject kobj; /* ref count & hvcs_struct lifetime */ + struct kref kref; /* ref count & hvcs_struct lifetime */ int connected; /* is the vty-server currently connected to a vty? */ uint32_t p_unit_address; /* partner unit address */ uint32_t p_partition_ID; /* partner partition ID */ @@ -307,8 +303,8 @@ struct hvcs_struct { struct vio_dev *vdev; }; -/* Required to back map a kobject to its containing object */ -#define from_kobj(kobj) container_of(kobj, struct hvcs_struct, kobj) +/* Required to back map a kref to its containing object */ +#define from_kref(k) container_of(k, struct hvcs_struct, kref) static struct list_head hvcs_structs = LIST_HEAD_INIT(hvcs_structs); static DEFINE_SPINLOCK(hvcs_structs_lock); @@ -334,7 +330,6 @@ static void hvcs_partner_free(struct hvcs_struct *hvcsd); static int hvcs_enable_device(struct hvcs_struct *hvcsd, uint32_t unit_address, unsigned int irq, struct vio_dev *dev); -static void destroy_hvcs_struct(struct kobject *kobj); static int hvcs_open(struct tty_struct *tty, struct file *filp); static void hvcs_close(struct tty_struct *tty, struct file *filp); static void hvcs_hangup(struct tty_struct * tty); @@ -703,10 +698,10 @@ static void hvcs_return_index(int index) hvcs_index_list[index] = -1; } -/* callback when the kboject ref count reaches zero */ -static void destroy_hvcs_struct(struct kobject *kobj) +/* callback when the kref ref count reaches zero */ +static void destroy_hvcs_struct(struct kref *kref) { - struct hvcs_struct *hvcsd = from_kobj(kobj); + struct hvcs_struct *hvcsd = from_kref(kref); struct vio_dev *vdev; unsigned long flags; @@ -743,10 +738,6 @@ static void destroy_hvcs_struct(struct kobject *kobj) kfree(hvcsd); } -static struct kobj_type hvcs_kobj_type = { - .release = destroy_hvcs_struct, -}; - static int hvcs_get_index(void) { int i; @@ -791,9 +782,7 @@ static int __devinit hvcs_probe( spin_lock_init(&hvcsd->lock); /* Automatically incs the refcount the first time */ - kobject_init(&hvcsd->kobj); - /* Set up the callback for terminating the hvcs_struct's life */ - hvcsd->kobj.ktype = &hvcs_kobj_type; + kref_init(&hvcsd->kref); hvcsd->vdev = dev; dev->dev.driver_data = hvcsd; @@ -844,7 +833,6 @@ static int __devexit hvcs_remove(struct vio_dev *dev) { struct hvcs_struct *hvcsd = dev->dev.driver_data; unsigned long flags; - struct kobject *kobjp; struct tty_struct *tty; if (!hvcsd) @@ -856,15 +844,13 @@ static int __devexit hvcs_remove(struct vio_dev *dev) tty = hvcsd->tty; - kobjp = &hvcsd->kobj; - spin_unlock_irqrestore(&hvcsd->lock, flags); /* * Let the last holder of this object cause it to be removed, which * would probably be tty_hangup below. */ - kobject_put (kobjp); + kref_put(&hvcsd->kref, destroy_hvcs_struct); /* * The hangup is a scheduled function which will auto chain call @@ -1086,7 +1072,7 @@ static int hvcs_enable_device(struct hvcs_struct *hvcsd, uint32_t unit_address, } /* - * This always increments the kobject ref count if the call is successful. + * This always increments the kref ref count if the call is successful. * Please remember to dec when you are done with the instance. * * NOTICE: Do NOT hold either the hvcs_struct.lock or hvcs_structs_lock when @@ -1103,7 +1089,7 @@ static struct hvcs_struct *hvcs_get_by_index(int index) list_for_each_entry(hvcsd, &hvcs_structs, next) { spin_lock_irqsave(&hvcsd->lock, flags); if (hvcsd->index == index) { - kobject_get(&hvcsd->kobj); + kref_get(&hvcsd->kref); spin_unlock_irqrestore(&hvcsd->lock, flags); spin_unlock(&hvcs_structs_lock); return hvcsd; @@ -1129,14 +1115,13 @@ static int hvcs_open(struct tty_struct *tty, struct file *filp) unsigned int irq; struct vio_dev *vdev; unsigned long unit_address; - struct kobject *kobjp; if (tty->driver_data) goto fast_open; /* * Is there a vty-server that shares the same index? - * This function increments the kobject index. + * This function increments the kref index. */ if (!(hvcsd = hvcs_get_by_index(tty->index))) { printk(KERN_WARNING "HVCS: open failed, no device associated" @@ -1181,7 +1166,7 @@ static int hvcs_open(struct tty_struct *tty, struct file *filp) * and will grab the spinlock and free the connection if it fails. */ if (((rc = hvcs_enable_device(hvcsd, unit_address, irq, vdev)))) { - kobject_put(&hvcsd->kobj); + kref_put(&hvcsd->kref, destroy_hvcs_struct); printk(KERN_WARNING "HVCS: enable device failed.\n"); return rc; } @@ -1192,17 +1177,11 @@ fast_open: hvcsd = tty->driver_data; spin_lock_irqsave(&hvcsd->lock, flags); - if (!kobject_get(&hvcsd->kobj)) { - spin_unlock_irqrestore(&hvcsd->lock, flags); - printk(KERN_ERR "HVCS: Kobject of open" - " hvcs doesn't exist.\n"); - return -EFAULT; /* Is this the right return value? */ - } - + kref_get(&hvcsd->kref); hvcsd->open_count++; - hvcsd->todo_mask |= HVCS_SCHED_READ; spin_unlock_irqrestore(&hvcsd->lock, flags); + open_success: hvcs_kick(); @@ -1212,9 +1191,8 @@ open_success: return 0; error_release: - kobjp = &hvcsd->kobj; spin_unlock_irqrestore(&hvcsd->lock, flags); - kobject_put(&hvcsd->kobj); + kref_put(&hvcsd->kref, destroy_hvcs_struct); printk(KERN_WARNING "HVCS: partner connect failed.\n"); return retval; @@ -1224,7 +1202,6 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp) { struct hvcs_struct *hvcsd; unsigned long flags; - struct kobject *kobjp; int irq = NO_IRQ; /* @@ -1245,7 +1222,6 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp) hvcsd = tty->driver_data; spin_lock_irqsave(&hvcsd->lock, flags); - kobjp = &hvcsd->kobj; if (--hvcsd->open_count == 0) { vio_disable_interrupts(hvcsd->vdev); @@ -1270,7 +1246,7 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp) tty->driver_data = NULL; free_irq(irq, hvcsd); - kobject_put(kobjp); + kref_put(&hvcsd->kref, destroy_hvcs_struct); return; } else if (hvcsd->open_count < 0) { printk(KERN_ERR "HVCS: vty-server@%X open_count: %d" @@ -1279,7 +1255,7 @@ static void hvcs_close(struct tty_struct *tty, struct file *filp) } spin_unlock_irqrestore(&hvcsd->lock, flags); - kobject_put(kobjp); + kref_put(&hvcsd->kref, destroy_hvcs_struct); } static void hvcs_hangup(struct tty_struct * tty) @@ -1287,21 +1263,17 @@ static void hvcs_hangup(struct tty_struct * tty) struct hvcs_struct *hvcsd = tty->driver_data; unsigned long flags; int temp_open_count; - struct kobject *kobjp; int irq = NO_IRQ; spin_lock_irqsave(&hvcsd->lock, flags); - /* Preserve this so that we know how many kobject refs to put */ + /* Preserve this so that we know how many kref refs to put */ temp_open_count = hvcsd->open_count; /* - * Don't kobject put inside the spinlock because the destruction + * Don't kref put inside the spinlock because the destruction * callback may use the spinlock and it may get called before the - * spinlock has been released. Get a pointer to the kobject and - * kobject_put on that after releasing the spinlock. + * spinlock has been released. */ - kobjp = &hvcsd->kobj; - vio_disable_interrupts(hvcsd->vdev); hvcsd->todo_mask = 0; @@ -1324,7 +1296,7 @@ static void hvcs_hangup(struct tty_struct * tty) free_irq(irq, hvcsd); /* - * We need to kobject_put() for every open_count we have since the + * We need to kref_put() for every open_count we have since the * tty_hangup() function doesn't invoke a close per open connection on a * non-console device. */ @@ -1335,7 +1307,7 @@ static void hvcs_hangup(struct tty_struct * tty) * NOTE: If this hangup was signaled from user space then the * final put will never happen. */ - kobject_put(kobjp); + kref_put(&hvcsd->kref, destroy_hvcs_struct); } } -- cgit v1.2.3-59-g8ed1b From 15f2bbb28e96e20149548926e5b08551ba140b14 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 3 Dec 2007 21:16:20 -0700 Subject: kobject: convert icom to use kref, not kobject The IBM icom serial driver is using a kobject only for reference counting, nothing else. So switch it to use a kref instead, which is all that is needed, and is much smaller. Cc: Anton Blanchard Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Ryan S. Arnold Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/serial/icom.c | 24 ++++++++++-------------- drivers/serial/icom.h | 2 +- 2 files changed, 11 insertions(+), 15 deletions(-) diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c index 9d3105b64a7a..9c2df5c857cf 100644 --- a/drivers/serial/icom.c +++ b/drivers/serial/icom.c @@ -48,7 +48,7 @@ #include #include #include -#include +#include #include #include @@ -65,7 +65,7 @@ #define ICOM_VERSION_STR "1.3.1" #define NR_PORTS 128 #define ICOM_PORT ((struct icom_port *)port) -#define to_icom_adapter(d) container_of(d, struct icom_adapter, kobj) +#define to_icom_adapter(d) container_of(d, struct icom_adapter, kref) static const struct pci_device_id icom_pci_table[] = { { @@ -141,6 +141,7 @@ static inline void trace(struct icom_port *, char *, unsigned long) {}; #else static inline void trace(struct icom_port *icom_port, char *trace_pt, unsigned long trace_data) {}; #endif +static void icom_kref_release(struct kref *kref); static void free_port_memory(struct icom_port *icom_port) { @@ -1063,11 +1064,11 @@ static int icom_open(struct uart_port *port) { int retval; - kobject_get(&ICOM_PORT->adapter->kobj); + kref_get(&ICOM_PORT->adapter->kref); retval = startup(ICOM_PORT); if (retval) { - kobject_put(&ICOM_PORT->adapter->kobj); + kref_put(&ICOM_PORT->adapter->kref, icom_kref_release); trace(ICOM_PORT, "STARTUP_ERROR", 0); return retval; } @@ -1088,7 +1089,7 @@ static void icom_close(struct uart_port *port) shutdown(ICOM_PORT); - kobject_put(&ICOM_PORT->adapter->kobj); + kref_put(&ICOM_PORT->adapter->kref, icom_kref_release); } static void icom_set_termios(struct uart_port *port, @@ -1485,18 +1486,14 @@ static void icom_remove_adapter(struct icom_adapter *icom_adapter) pci_release_regions(icom_adapter->pci_dev); } -static void icom_kobj_release(struct kobject *kobj) +static void icom_kref_release(struct kref *kref) { struct icom_adapter *icom_adapter; - icom_adapter = to_icom_adapter(kobj); + icom_adapter = to_icom_adapter(kref); icom_remove_adapter(icom_adapter); } -static struct kobj_type icom_kobj_type = { - .release = icom_kobj_release, -}; - static int __devinit icom_probe(struct pci_dev *dev, const struct pci_device_id *ent) { @@ -1592,8 +1589,7 @@ static int __devinit icom_probe(struct pci_dev *dev, } } - kobject_init(&icom_adapter->kobj); - icom_adapter->kobj.ktype = &icom_kobj_type; + kref_init(&icom_adapter->kref); return 0; probe_exit2: @@ -1619,7 +1615,7 @@ static void __devexit icom_remove(struct pci_dev *dev) icom_adapter = list_entry(tmp, struct icom_adapter, icom_adapter_entry); if (icom_adapter->pci_dev == dev) { - kobject_put(&icom_adapter->kobj); + kref_put(&icom_adapter->kref, icom_kref_release); return; } } diff --git a/drivers/serial/icom.h b/drivers/serial/icom.h index e8578d8cd35e..027455496745 100644 --- a/drivers/serial/icom.h +++ b/drivers/serial/icom.h @@ -270,7 +270,7 @@ struct icom_adapter { #define V2_ONE_PORT_RVX_ONE_PORT_IMBED_MDM 0x0251 int numb_ports; struct list_head icom_adapter_entry; - struct kobject kobj; + struct kref kref; }; /* prototype */ -- cgit v1.2.3-59-g8ed1b From 663a47430b361f863b515752a97166a7a4b92d35 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 29 Nov 2007 18:32:47 -0500 Subject: kobject: fix up kobject_set_name to use kvasprintf Kay pointed out that kobject_set_name was being very stupid, doing two allocations for every call, when it should just be using the kernel function kvasprintf() instead. This change adds the internal kobject_set_name_vargs() function, which other follow-on patches will be using. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- lib/kobject.c | 71 +++++++++++++++++++++++++++-------------------------------- 1 file changed, 32 insertions(+), 39 deletions(-) diff --git a/lib/kobject.c b/lib/kobject.c index 9500339ae024..4a310e55a886 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -232,60 +232,53 @@ int kobject_register(struct kobject * kobj) return error; } +/** + * kobject_set_name_vargs - Set the name of an kobject + * @kobj: struct kobject to set the name of + * @fmt: format string used to build the name + * @vargs: vargs to format the string. + */ +static int kobject_set_name_vargs(struct kobject *kobj, const char *fmt, + va_list vargs) +{ + va_list aq; + char *name; + + va_copy(aq, vargs); + name = kvasprintf(GFP_KERNEL, fmt, vargs); + va_end(aq); + + if (!name) + return -ENOMEM; + + /* Free the old name, if necessary. */ + kfree(kobj->k_name); + + /* Now, set the new name */ + kobj->k_name = name; + + return 0; +} /** * kobject_set_name - Set the name of a kobject - * @kobj: kobject to name + * @kobj: struct kobject to set the name of * @fmt: format string used to build the name * * This sets the name of the kobject. If you have already added the * kobject to the system, you must call kobject_rename() in order to * change the name of the kobject. */ -int kobject_set_name(struct kobject * kobj, const char * fmt, ...) +int kobject_set_name(struct kobject *kobj, const char *fmt, ...) { - int error = 0; - int limit; - int need; va_list args; - char *name; + int retval; - /* find out how big a buffer we need */ - name = kmalloc(1024, GFP_KERNEL); - if (!name) { - error = -ENOMEM; - goto done; - } va_start(args, fmt); - need = vsnprintf(name, 1024, fmt, args); + retval = kobject_set_name_vargs(kobj, fmt, args); va_end(args); - kfree(name); - /* Allocate the new space and copy the string in */ - limit = need + 1; - name = kmalloc(limit, GFP_KERNEL); - if (!name) { - error = -ENOMEM; - goto done; - } - va_start(args, fmt); - need = vsnprintf(name, limit, fmt, args); - va_end(args); - - /* something wrong with the string we copied? */ - if (need >= limit) { - kfree(name); - error = -EFAULT; - goto done; - } - - /* Free the old name, if necessary. */ - kfree(kobj->k_name); - - /* Now, set the new name */ - kobj->k_name = name; -done: - return error; + return retval; } EXPORT_SYMBOL(kobject_set_name); -- cgit v1.2.3-59-g8ed1b From 18041f4775688af073d9b3ab0ffc262c1847e60b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 3 Dec 2007 21:31:08 -0800 Subject: kobject: make kobject_cleanup be static No one except the kobject core calls it so make the function static. Signed-off-by: Greg Kroah-Hartman --- include/linux/kobject.h | 2 -- lib/kobject.c | 9 ++++----- 2 files changed, 4 insertions(+), 7 deletions(-) diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 4a0d27f475d7..2d19a079ee79 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -79,8 +79,6 @@ static inline const char * kobject_name(const struct kobject * kobj) } extern void kobject_init(struct kobject *); -extern void kobject_cleanup(struct kobject *); - extern int __must_check kobject_add(struct kobject *); extern void kobject_del(struct kobject *); diff --git a/lib/kobject.c b/lib/kobject.c index 4a310e55a886..a152036db006 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -436,12 +436,11 @@ struct kobject * kobject_get(struct kobject * kobj) return kobj; } -/** - * kobject_cleanup - free kobject resources. - * @kobj: object. +/* + * kobject_cleanup - free kobject resources. + * @kobj: object to cleanup */ - -void kobject_cleanup(struct kobject * kobj) +static void kobject_cleanup(struct kobject *kobj) { struct kobj_type * t = get_ktype(kobj); struct kset * s = kobj->kset; -- cgit v1.2.3-59-g8ed1b From e86000d042d23904bbb609af2f8618a541cf129b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 3 Dec 2007 21:31:08 -0800 Subject: kobject: add kobject_init_ng function This is what the kobject_init function is going to become. Add this to the kernel and then we can convert the tree over to use it. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/kobject.h | 1 + lib/kobject.c | 42 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 43 insertions(+) diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 2d19a079ee79..bdf4f7c45f19 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -79,6 +79,7 @@ static inline const char * kobject_name(const struct kobject * kobj) } extern void kobject_init(struct kobject *); +extern void kobject_init_ng(struct kobject *kobj, struct kobj_type *ktype); extern int __must_check kobject_add(struct kobject *); extern void kobject_del(struct kobject *); diff --git a/lib/kobject.c b/lib/kobject.c index a152036db006..60586bcc7a71 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -282,6 +282,48 @@ int kobject_set_name(struct kobject *kobj, const char *fmt, ...) } EXPORT_SYMBOL(kobject_set_name); +/** + * kobject_init_ng - initialize a kobject structure + * @kobj: pointer to the kobject to initialize + * @ktype: pointer to the ktype for this kobject. + * + * This function will properly initialize a kobject such that it can then + * be passed to the kobject_add() call. + * + * After this function is called, the kobject MUST be cleaned up by a call + * to kobject_put(), not by a call to kfree directly to ensure that all of + * the memory is cleaned up properly. + */ +void kobject_init_ng(struct kobject *kobj, struct kobj_type *ktype) +{ + char *err_str; + + if (!kobj) { + err_str = "invalid kobject pointer!"; + goto error; + } + if (!ktype) { + err_str = "must have a ktype to be initialized properly!\n"; + goto error; + } + if (atomic_read(&kobj->kref.refcount)) { + /* do not error out as sometimes we can recover */ + printk(KERN_ERR "kobject: reference count is already set, " + "something is seriously wrong.\n"); + dump_stack(); + } + + kref_init(&kobj->kref); + INIT_LIST_HEAD(&kobj->entry); + kobj->ktype = ktype; + return; + +error: + printk(KERN_ERR "kobject: %s\n", err_str); + dump_stack(); +} +EXPORT_SYMBOL(kobject_init_ng); + /** * kobject_rename - change the name of an object * @kobj: object in question. -- cgit v1.2.3-59-g8ed1b From 244f6cee9a928103132a722292bfa0eb84114b07 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 3 Dec 2007 21:31:08 -0800 Subject: kobject: add kobject_add_ng function This is what the kobject_add function is going to become. Add this to the kernel and then we can convert the tree over to use it. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/kobject.h | 3 +++ lib/kobject.c | 66 +++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 69 insertions(+) diff --git a/include/linux/kobject.h b/include/linux/kobject.h index bdf4f7c45f19..57eea4cb940d 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -81,6 +81,9 @@ static inline const char * kobject_name(const struct kobject * kobj) extern void kobject_init(struct kobject *); extern void kobject_init_ng(struct kobject *kobj, struct kobj_type *ktype); extern int __must_check kobject_add(struct kobject *); +extern int __must_check kobject_add_ng(struct kobject *kobj, + struct kobject *parent, + const char *fmt, ...); extern void kobject_del(struct kobject *); extern int __must_check kobject_rename(struct kobject *, const char *new_name); diff --git a/lib/kobject.c b/lib/kobject.c index 60586bcc7a71..329fd1126b3f 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -324,6 +324,72 @@ error: } EXPORT_SYMBOL(kobject_init_ng); +static int kobject_add_varg(struct kobject *kobj, struct kobject *parent, + const char *fmt, va_list vargs) +{ + va_list aq; + int retval; + + va_copy(aq, vargs); + retval = kobject_set_name_vargs(kobj, fmt, aq); + va_end(aq); + if (retval) { + printk(KERN_ERR "kobject: can not set name properly!\n"); + return retval; + } + kobj->parent = parent; + return kobject_add(kobj); +} + +/** + * kobject_add_ng - the main kobject add function + * @kobj: the kobject to add + * @parent: pointer to the parent of the kobject. + * @fmt: format to name the kobject with. + * + * The kobject name is set and added to the kobject hierarchy in this + * function. + * + * If @parent is set, then the parent of the @kobj will be set to it. + * If @parent is NULL, then the parent of the @kobj will be set to the + * kobject associted with the kset assigned to this kobject. If no kset + * is assigned to the kobject, then the kobject will be located in the + * root of the sysfs tree. + * + * If this function returns an error, kobject_put() must be called to + * properly clean up the memory associated with the object. + * + * If the function is successful, the only way to properly clean up the + * memory is with a call to kobject_del(), in which case, a call to + * kobject_put() is not necessary (kobject_del() does the final + * kobject_put() to call the release function in the ktype's release + * pointer.) + * + * Under no instance should the kobject that is passed to this function + * be directly freed with a call to kfree(), that can leak memory. + * + * Note, no uevent will be created with this call, the caller should set + * up all of the necessary sysfs files for the object and then call + * kobject_uevent() with the UEVENT_ADD parameter to ensure that + * userspace is properly notified of this kobject's creation. + */ +int kobject_add_ng(struct kobject *kobj, struct kobject *parent, + const char *fmt, ...) +{ + va_list args; + int retval; + + if (!kobj) + return -EINVAL; + + va_start(args, fmt); + retval = kobject_add_varg(kobj, parent, fmt, args); + va_end(args); + + return retval; +} +EXPORT_SYMBOL(kobject_add_ng); + /** * kobject_rename - change the name of an object * @kobj: object in question. -- cgit v1.2.3-59-g8ed1b From c11c4154e7ff4cebfadad849b1e22689d759c3f4 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 3 Dec 2007 21:31:08 -0800 Subject: kobject: add kobject_init_and_add function Also add a kobject_init_and_add function which bundles up what a lot of the current callers want to do all at once, and it properly handles the memory usages, unlike kobject_register(); Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/kobject.h | 5 +++++ lib/kobject.c | 27 +++++++++++++++++++++++++++ 2 files changed, 32 insertions(+) diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 57eea4cb940d..e2b8c3dae425 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -84,6 +84,11 @@ extern int __must_check kobject_add(struct kobject *); extern int __must_check kobject_add_ng(struct kobject *kobj, struct kobject *parent, const char *fmt, ...); +extern int __must_check kobject_init_and_add(struct kobject *kobj, + struct kobj_type *ktype, + struct kobject *parent, + const char *fmt, ...); + extern void kobject_del(struct kobject *); extern int __must_check kobject_rename(struct kobject *, const char *new_name); diff --git a/lib/kobject.c b/lib/kobject.c index 329fd1126b3f..8f249408b2ec 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -390,6 +390,33 @@ int kobject_add_ng(struct kobject *kobj, struct kobject *parent, } EXPORT_SYMBOL(kobject_add_ng); +/** + * kobject_init_and_add - initialize a kobject structure and add it to the kobject hierarchy + * @kobj: pointer to the kobject to initialize + * @ktype: pointer to the ktype for this kobject. + * @parent: pointer to the parent of this kobject. + * @fmt: the name of the kobject. + * + * This function combines the call to kobject_init_ng() and + * kobject_add_ng(). The same type of error handling after a call to + * kobject_add_ng() and kobject lifetime rules are the same here. + */ +int kobject_init_and_add(struct kobject *kobj, struct kobj_type *ktype, + struct kobject *parent, const char *fmt, ...) +{ + va_list args; + int retval; + + kobject_init_ng(kobj, ktype); + + va_start(args, fmt); + retval = kobject_add_varg(kobj, parent, fmt, args); + va_end(args); + + return retval; +} +EXPORT_SYMBOL_GPL(kobject_init_and_add); + /** * kobject_rename - change the name of an object * @kobj: object in question. -- cgit v1.2.3-59-g8ed1b From 3514faca19a6fdc209734431c509631ea92b094e Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 16 Oct 2007 10:11:44 -0600 Subject: kobject: remove struct kobj_type from struct kset We don't need a "default" ktype for a kset. We should set this explicitly every time for each kset. This change is needed so that we can make ksets dynamic, and cleans up one of the odd, undocumented assumption that the kset/kobject/ktype model has. This patch is based on a lot of help from Kay Sievers. Nasty bug in the block code was found by Dave Young Cc: Kay Sievers Cc: Dave Young Signed-off-by: Greg Kroah-Hartman --- arch/powerpc/platforms/pseries/power.c | 2 +- arch/s390/hypfs/inode.c | 4 ++-- arch/s390/kernel/ipl.c | 8 ++++---- block/genhd.c | 5 +++-- drivers/acpi/bus.c | 2 +- drivers/base/bus.c | 5 +++-- drivers/base/class.c | 8 +++++--- drivers/base/core.c | 5 +++-- drivers/base/firmware.c | 5 +++-- drivers/base/hypervisor.c | 2 +- drivers/base/sys.c | 3 ++- drivers/edac/edac_mc_sysfs.c | 2 +- drivers/firmware/edd.c | 5 +++-- drivers/firmware/efivars.c | 9 +++++---- drivers/parisc/pdc_stable.c | 9 +++++---- drivers/pci/hotplug/pci_hotplug_core.c | 7 ++++--- drivers/pci/hotplug/rpadlpar_sysfs.c | 1 - drivers/uio/uio.c | 2 +- fs/configfs/mount.c | 4 ++-- fs/debugfs/inode.c | 4 ++-- fs/dlm/lockspace.c | 6 ++---- fs/ecryptfs/main.c | 4 ++-- fs/fuse/inode.c | 8 ++++---- fs/gfs2/locking/dlm/sysfs.c | 6 ++---- fs/gfs2/sys.c | 6 ++---- fs/namespace.c | 2 +- fs/ocfs2/cluster/masklog.c | 2 +- fs/ocfs2/cluster/sys.c | 2 +- fs/sysfs/file.c | 4 +--- include/linux/kobject.h | 15 ++++----------- kernel/ksysfs.c | 2 +- kernel/module.c | 2 +- kernel/params.c | 9 +++++---- kernel/power/main.c | 2 +- mm/slub.c | 5 +++-- security/inode.c | 4 ++-- 36 files changed, 84 insertions(+), 87 deletions(-) diff --git a/arch/powerpc/platforms/pseries/power.c b/arch/powerpc/platforms/pseries/power.c index 73e69023d90a..08d7a5007167 100644 --- a/arch/powerpc/platforms/pseries/power.c +++ b/arch/powerpc/platforms/pseries/power.c @@ -57,7 +57,7 @@ static struct subsys_attribute auto_poweron_attr = { }; #ifndef CONFIG_PM -decl_subsys(power,NULL,NULL); +decl_subsys(power, NULL); static struct attribute *g[] = { &auto_poweron_attr.attr, diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c index 5245717295b8..c022ccc04d41 100644 --- a/arch/s390/hypfs/inode.c +++ b/arch/s390/hypfs/inode.c @@ -490,7 +490,7 @@ static struct super_operations hypfs_s_ops = { .show_options = hypfs_show_options, }; -static decl_subsys(s390, NULL, NULL); +static decl_subsys(s390, NULL); static int __init hypfs_init(void) { @@ -506,7 +506,7 @@ static int __init hypfs_init(void) goto fail_diag; } } - kobj_set_kset_s(&s390_subsys, hypervisor_subsys); + s390_subsys.kobj.kset = &hypervisor_subsys; rc = subsystem_register(&s390_subsys); if (rc) goto fail_sysfs; diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index ce0856d32500..cae793af5423 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -418,7 +418,7 @@ static struct attribute_group ipl_unknown_attr_group = { .attrs = ipl_unknown_attrs, }; -static decl_subsys(ipl, NULL, NULL); +static decl_subsys(ipl, NULL); /* * reipl section @@ -590,7 +590,7 @@ static ssize_t reipl_type_store(struct kset *kset, const char *buf, static struct subsys_attribute reipl_type_attr = __ATTR(reipl_type, 0644, reipl_type_show, reipl_type_store); -static decl_subsys(reipl, NULL, NULL); +static decl_subsys(reipl, NULL); /* * dump section @@ -685,13 +685,13 @@ static ssize_t dump_type_store(struct kset *kset, const char *buf, static struct subsys_attribute dump_type_attr = __ATTR(dump_type, 0644, dump_type_show, dump_type_store); -static decl_subsys(dump, NULL, NULL); +static decl_subsys(dump, NULL); /* * Shutdown actions section */ -static decl_subsys(shutdown_actions, NULL, NULL); +static decl_subsys(shutdown_actions, NULL); /* on panic */ diff --git a/block/genhd.c b/block/genhd.c index f2ac914160d1..32227b7ecd17 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -584,7 +584,7 @@ static struct kset_uevent_ops block_uevent_ops = { .uevent = block_uevent, }; -decl_subsys(block, &ktype_block, &block_uevent_ops); +decl_subsys(block, &block_uevent_ops); /* * aggregate disk stat collector. Uses the same stats that the sysfs @@ -721,7 +721,8 @@ struct gendisk *alloc_disk_node(int minors, int node_id) } } disk->minors = minors; - kobj_set_kset_s(disk,block_subsys); + disk->kobj.kset = &block_subsys; + disk->kobj.ktype = &ktype_block; kobject_init(&disk->kobj); rand_initialize_disk(disk); INIT_WORK(&disk->async_notify, diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index f4487c38d9f2..7c172d9d7acf 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -743,7 +743,7 @@ static int __init acpi_bus_init(void) return -ENODEV; } -decl_subsys(acpi, NULL, NULL); +decl_subsys(acpi, NULL); static int __init acpi_init(void) { diff --git a/drivers/base/bus.c b/drivers/base/bus.c index 9a19b071c573..630956037e18 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -166,7 +166,7 @@ static struct kset_uevent_ops bus_uevent_ops = { .filter = bus_uevent_filter, }; -static decl_subsys(bus, &bus_ktype, &bus_uevent_ops); +static decl_subsys(bus, &bus_uevent_ops); #ifdef CONFIG_HOTPLUG @@ -639,6 +639,7 @@ int bus_add_driver(struct device_driver *drv) if (error) goto out_put_bus; drv->kobj.kset = &bus->drivers; + drv->kobj.ktype = &driver_ktype; error = kobject_register(&drv->kobj); if (error) goto out_put_bus; @@ -851,6 +852,7 @@ int bus_register(struct bus_type * bus) goto out; bus->subsys.kobj.kset = &bus_subsys; + bus->subsys.kobj.ktype = &bus_ktype; retval = subsystem_register(&bus->subsys); if (retval) @@ -868,7 +870,6 @@ int bus_register(struct bus_type * bus) kobject_set_name(&bus->drivers.kobj, "drivers"); bus->drivers.kobj.parent = &bus->subsys.kobj; - bus->drivers.ktype = &driver_ktype; retval = kset_register(&bus->drivers); if (retval) goto bus_drivers_fail; diff --git a/drivers/base/class.c b/drivers/base/class.c index a863bb091e11..8ad98924cddb 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -71,7 +71,7 @@ static struct kobj_type class_ktype = { }; /* Hotplug events for classes go to the class_obj subsys */ -static decl_subsys(class, &class_ktype, NULL); +static decl_subsys(class, NULL); int class_create_file(struct class * cls, const struct class_attribute * attr) @@ -150,6 +150,7 @@ int class_register(struct class * cls) return error; cls->subsys.kobj.kset = &class_subsys; + cls->subsys.kobj.ktype = &class_ktype; error = subsystem_register(&cls->subsys); if (!error) { @@ -452,7 +453,7 @@ static struct kset_uevent_ops class_uevent_ops = { .uevent = class_uevent, }; -static decl_subsys(class_obj, &class_device_ktype, &class_uevent_ops); +static decl_subsys(class_obj, &class_uevent_ops); static int class_device_add_attrs(struct class_device * cd) @@ -537,7 +538,8 @@ static struct class_device_attribute class_uevent_attr = void class_device_initialize(struct class_device *class_dev) { - kobj_set_kset_s(class_dev, class_obj_subsys); + class_dev->kobj.kset = &class_obj_subsys; + class_dev->kobj.ktype = &class_device_ktype; kobject_init(&class_dev->kobj); INIT_LIST_HEAD(&class_dev->node); } diff --git a/drivers/base/core.c b/drivers/base/core.c index ce6b64c489ad..c8f2ac03d46d 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -405,7 +405,7 @@ static struct device_attribute devt_attr = * devices_subsys - structure to be registered with kobject core. */ -decl_subsys(devices, &device_ktype, &device_uevent_ops); +decl_subsys(devices, &device_uevent_ops); /** @@ -525,7 +525,8 @@ static void klist_children_put(struct klist_node *n) void device_initialize(struct device *dev) { - kobj_set_kset_s(dev, devices_subsys); + dev->kobj.kset = &devices_subsys; + dev->kobj.ktype = &device_ktype; kobject_init(&dev->kobj); klist_init(&dev->klist_children, klist_children_get, klist_children_put); diff --git a/drivers/base/firmware.c b/drivers/base/firmware.c index 90c862932169..336be0450d54 100644 --- a/drivers/base/firmware.c +++ b/drivers/base/firmware.c @@ -15,11 +15,12 @@ #include "base.h" -static decl_subsys(firmware, NULL, NULL); +static decl_subsys(firmware, NULL); int firmware_register(struct kset *s) { - kobj_set_kset_s(s, firmware_subsys); + s->kobj.kset = &firmware_subsys; + s->kobj.ktype = NULL; return subsystem_register(s); } diff --git a/drivers/base/hypervisor.c b/drivers/base/hypervisor.c index 7080b413ddc9..14e75e9ec783 100644 --- a/drivers/base/hypervisor.c +++ b/drivers/base/hypervisor.c @@ -11,7 +11,7 @@ #include "base.h" -decl_subsys(hypervisor, NULL, NULL); +decl_subsys(hypervisor, NULL); EXPORT_SYMBOL_GPL(hypervisor_subsys); int __init hypervisor_init(void) diff --git a/drivers/base/sys.c b/drivers/base/sys.c index ac7ff6d0c6e5..7cf19fc318da 100644 --- a/drivers/base/sys.c +++ b/drivers/base/sys.c @@ -131,7 +131,7 @@ EXPORT_SYMBOL_GPL(sysdev_class_remove_file); /* * declare system_subsys */ -static decl_subsys(system, &ktype_sysdev_class, NULL); +static decl_subsys(system, NULL); int sysdev_class_register(struct sysdev_class * cls) { @@ -139,6 +139,7 @@ int sysdev_class_register(struct sysdev_class * cls) kobject_name(&cls->kset.kobj)); INIT_LIST_HEAD(&cls->drivers); cls->kset.kobj.parent = &system_subsys.kobj; + cls->kset.kobj.ktype = &ktype_sysdev_class; cls->kset.kobj.kset = &system_subsys; return kset_register(&cls->kset); } diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c index 3706b2bc0987..905fcd73c26e 100644 --- a/drivers/edac/edac_mc_sysfs.c +++ b/drivers/edac/edac_mc_sysfs.c @@ -744,7 +744,6 @@ static struct kobj_type ktype_mc_set_attribs = { */ static struct kset mc_kset = { .kobj = {.ktype = &ktype_mc_set_attribs }, - .ktype = &ktype_mci, }; @@ -767,6 +766,7 @@ int edac_mc_register_sysfs_main_kobj(struct mem_ctl_info *mci) /* this instance become part of the mc_kset */ kobj_mci->kset = &mc_kset; + kobj_mci->ktype = &ktype_mci; /* set the name of the mc object */ err = kobject_set_name(kobj_mci, "mc%d", mci->mc_idx); diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c index 6942e065e609..fc567fad3f7c 100644 --- a/drivers/firmware/edd.c +++ b/drivers/firmware/edd.c @@ -631,7 +631,7 @@ static struct kobj_type edd_ktype = { .default_attrs = def_attrs, }; -static decl_subsys(edd, &edd_ktype, NULL); +static decl_subsys(edd, NULL); /** @@ -723,7 +723,8 @@ edd_device_register(struct edd_device *edev, int i) edd_dev_set_info(edev, i); kobject_set_name(&edev->kobj, "int13_dev%02x", 0x80 + i); - kobj_set_kset_s(edev,edd_subsys); + edev->kobj.kset = &edd_subsys; + edev->kobj.ktype = &edd_ktype; error = kobject_register(&edev->kobj); if (!error) edd_populate_dir(edev); diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c index 858a7b95933b..06ecdb9f6013 100644 --- a/drivers/firmware/efivars.c +++ b/drivers/firmware/efivars.c @@ -583,8 +583,8 @@ static struct subsys_attribute *efi_subsys_attrs[] = { NULL, /* maybe more in the future? */ }; -static decl_subsys(vars, &efivar_ktype, NULL); -static decl_subsys(efi, NULL, NULL); +static decl_subsys(vars, NULL); +static decl_subsys(efi, NULL); /* * efivar_create_sysfs_entry() @@ -629,7 +629,8 @@ efivar_create_sysfs_entry(unsigned long variable_name_size, efi_guid_unparse(vendor_guid, short_name + strlen(short_name)); kobject_set_name(&new_efivar->kobj, "%s", short_name); - kobj_set_kset_s(new_efivar, vars_subsys); + new_efivar->kobj.kset = &vars_subsys; + new_efivar->kobj.ktype = &efivar_ktype; i = kobject_register(&new_efivar->kobj); if (i) { kfree(short_name); @@ -687,7 +688,7 @@ efivars_init(void) goto out_free; } - kobj_set_kset_s(&vars_subsys, efi_subsys); + vars_subsys.kobj.kset = &efi_subsys; error = subsystem_register(&vars_subsys); diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c index ebb09e98d215..1382be64cc3f 100644 --- a/drivers/parisc/pdc_stable.c +++ b/drivers/parisc/pdc_stable.c @@ -964,8 +964,8 @@ static struct subsys_attribute *pdcs_subsys_attrs[] = { NULL, }; -static decl_subsys(paths, &ktype_pdcspath, NULL); -static decl_subsys(stable, NULL, NULL); +static decl_subsys(paths, NULL); +static decl_subsys(stable, NULL); /** * pdcs_register_pathentries - Prepares path entries kobjects for sysfs usage. @@ -997,7 +997,8 @@ pdcs_register_pathentries(void) if ((err = kobject_set_name(&entry->kobj, "%s", entry->name))) return err; - kobj_set_kset_s(entry, paths_subsys); + entry->kobj.kset = &paths_subsys; + entry->kobj.ktype = &ktype_pdcspath; if ((err = kobject_register(&entry->kobj))) return err; @@ -1072,7 +1073,7 @@ pdc_stable_init(void) error = subsys_create_file(&stable_subsys, attr); /* register the paths subsys as a subsystem of stable subsys */ - kobj_set_kset_s(&paths_subsys, stable_subsys); + paths_subsys.kobj.kset = &stable_subsys; if ((rc = subsystem_register(&paths_subsys))) goto fail_subsysreg; diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index 01c351c176ac..ce1cff0fdeca 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -96,7 +96,7 @@ static struct kobj_type hotplug_slot_ktype = { .release = &hotplug_slot_release, }; -decl_subsys_name(pci_hotplug_slots, slots, &hotplug_slot_ktype, NULL); +decl_subsys_name(pci_hotplug_slots, slots, NULL); /* these strings match up with the values in pci_bus_speed */ static char *pci_bus_speed_strings[] = { @@ -633,7 +633,8 @@ int pci_hp_register (struct hotplug_slot *slot) } kobject_set_name(&slot->kobj, "%s", slot->name); - kobj_set_kset_s(slot, pci_hotplug_slots_subsys); + slot->kobj.kset = &pci_hotplug_slots_subsys; + slot->kobj.ktype = &hotplug_slot_ktype; /* this can fail if we have already registered a slot with the same name */ if (kobject_register(&slot->kobj)) { @@ -701,7 +702,7 @@ static int __init pci_hotplug_init (void) { int result; - kobj_set_kset_s(&pci_hotplug_slots_subsys, pci_bus_type.subsys); + pci_hotplug_slots_subsys.kobj.kset = &pci_bus_type.subsys; result = subsystem_register(&pci_hotplug_slots_subsys); if (result) { err("Register subsys with error %d\n", result); diff --git a/drivers/pci/hotplug/rpadlpar_sysfs.c b/drivers/pci/hotplug/rpadlpar_sysfs.c index a080fedf0332..76090937c758 100644 --- a/drivers/pci/hotplug/rpadlpar_sysfs.c +++ b/drivers/pci/hotplug/rpadlpar_sysfs.c @@ -131,7 +131,6 @@ struct kobj_type ktype_dlpar_io = { struct kset dlpar_io_kset = { .kobj = {.ktype = &ktype_dlpar_io, .parent = &pci_hotplug_slots_subsys.kobj}, - .ktype = &ktype_dlpar_io, }; int dlpar_sysfs_init(void) diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c index 865f32b63b5c..606aae7490ab 100644 --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -160,7 +160,7 @@ static int uio_dev_add_attributes(struct uio_device *idev) if (!map_found) { map_found = 1; kobject_set_name(&idev->map_attr_kset.kobj,"maps"); - idev->map_attr_kset.ktype = &map_attr_type; + idev->map_attr_kset.kobj.ktype = &map_attr_type; idev->map_attr_kset.kobj.parent = &idev->dev->kobj; ret = kset_register(&idev->map_attr_kset); if (ret) diff --git a/fs/configfs/mount.c b/fs/configfs/mount.c index 3bf0278ea843..374ddbd6648d 100644 --- a/fs/configfs/mount.c +++ b/fs/configfs/mount.c @@ -128,7 +128,7 @@ void configfs_release_fs(void) } -static decl_subsys(config, NULL, NULL); +static decl_subsys(config, NULL); static int __init configfs_init(void) { @@ -140,7 +140,7 @@ static int __init configfs_init(void) if (!configfs_dir_cachep) goto out; - kobj_set_kset_s(&config_subsys, kernel_subsys); + config_subsys.kobj.kset = &kernel_subsys; err = subsystem_register(&config_subsys); if (err) { kmem_cache_destroy(configfs_dir_cachep); diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c index 6a713b33992f..f7f13516fc1a 100644 --- a/fs/debugfs/inode.c +++ b/fs/debugfs/inode.c @@ -426,13 +426,13 @@ exit: } EXPORT_SYMBOL_GPL(debugfs_rename); -static decl_subsys(debug, NULL, NULL); +static decl_subsys(debug, NULL); static int __init debugfs_init(void) { int retval; - kobj_set_kset_s(&debug_subsys, kernel_subsys); + debug_subsys.kobj.kset = &kernel_subsys; retval = subsystem_register(&debug_subsys); if (retval) return retval; diff --git a/fs/dlm/lockspace.c b/fs/dlm/lockspace.c index 6353a8384520..18e4a17b9bee 100644 --- a/fs/dlm/lockspace.c +++ b/fs/dlm/lockspace.c @@ -166,9 +166,7 @@ static struct kobj_type dlm_ktype = { .release = lockspace_kobj_release, }; -static struct kset dlm_kset = { - .ktype = &dlm_ktype, -}; +static struct kset dlm_kset; static int kobject_setup(struct dlm_ls *ls) { @@ -228,7 +226,7 @@ int dlm_lockspace_init(void) spin_lock_init(&lslist_lock); kobject_set_name(&dlm_kset.kobj, "dlm"); - kobj_set_kset_s(&dlm_kset, kernel_subsys); + dlm_kset.kobj.kset = &kernel_subsys; error = kset_register(&dlm_kset); if (error) printk("dlm_lockspace_init: cannot register kset %d\n", error); diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c index f9f32472c505..fe2f44fa17cc 100644 --- a/fs/ecryptfs/main.c +++ b/fs/ecryptfs/main.c @@ -734,7 +734,7 @@ static int ecryptfs_init_kmem_caches(void) return 0; } -static decl_subsys(ecryptfs, NULL, NULL); +static decl_subsys(ecryptfs, NULL); static ssize_t version_show(struct kset *kset, char *buff) { @@ -798,6 +798,7 @@ static int do_sysfs_registration(void) { int rc; + ecryptfs_subsys.kobj.kset = &fs_subsys; rc = subsystem_register(&ecryptfs_subsys); if (rc) { printk(KERN_ERR @@ -845,7 +846,6 @@ static int __init ecryptfs_init(void) printk(KERN_ERR "Failed to register filesystem\n"); goto out_free_kmem_caches; } - kobj_set_kset_s(&ecryptfs_subsys, fs_subsys); rc = do_sysfs_registration(); if (rc) { printk(KERN_ERR "sysfs registration failed\n"); diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 84f9f7dfdf5b..f5e4182c482e 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -744,8 +744,8 @@ static inline void unregister_fuseblk(void) } #endif -static decl_subsys(fuse, NULL, NULL); -static decl_subsys(connections, NULL, NULL); +static decl_subsys(fuse, NULL); +static decl_subsys(connections, NULL); static void fuse_inode_init_once(struct kmem_cache *cachep, void *foo) { @@ -795,12 +795,12 @@ static int fuse_sysfs_init(void) { int err; - kobj_set_kset_s(&fuse_subsys, fs_subsys); + fuse_subsys.kobj.kset = &fs_subsys; err = subsystem_register(&fuse_subsys); if (err) goto out_err; - kobj_set_kset_s(&connections_subsys, fuse_subsys); + connections_subsys.kobj.kset = &fuse_subsys; err = subsystem_register(&connections_subsys); if (err) goto out_fuse_unregister; diff --git a/fs/gfs2/locking/dlm/sysfs.c b/fs/gfs2/locking/dlm/sysfs.c index ae9e6a25fe2b..93e66b22757f 100644 --- a/fs/gfs2/locking/dlm/sysfs.c +++ b/fs/gfs2/locking/dlm/sysfs.c @@ -189,9 +189,7 @@ static struct kobj_type gdlm_ktype = { .sysfs_ops = &gdlm_attr_ops, }; -static struct kset gdlm_kset = { - .ktype = &gdlm_ktype, -}; +static struct kset gdlm_kset; int gdlm_kobject_setup(struct gdlm_ls *ls, struct kobject *fskobj) { @@ -224,7 +222,7 @@ int gdlm_sysfs_init(void) int error; kobject_set_name(&gdlm_kset.kobj, "lock_dlm"); - kobj_set_kset_s(&gdlm_kset, kernel_subsys); + gdlm_kset.kobj.kset = &kernel_subsys; error = kset_register(&gdlm_kset); if (error) printk("lock_dlm: cannot register kset %d\n", error); diff --git a/fs/gfs2/sys.c b/fs/gfs2/sys.c index 06e0b7768d97..d7fa54443f0c 100644 --- a/fs/gfs2/sys.c +++ b/fs/gfs2/sys.c @@ -221,9 +221,7 @@ static struct kobj_type gfs2_ktype = { .sysfs_ops = &gfs2_attr_ops, }; -static struct kset gfs2_kset = { - .ktype = &gfs2_ktype, -}; +static struct kset gfs2_kset; /* * display struct lm_lockstruct fields @@ -551,7 +549,7 @@ int gfs2_sys_init(void) gfs2_sys_margs = NULL; spin_lock_init(&gfs2_sys_margs_lock); kobject_set_name(&gfs2_kset.kobj, "gfs2"); - kobj_set_kset_s(&gfs2_kset, fs_subsys); + gfs2_kset.kobj.kset = &fs_subsys; return kset_register(&gfs2_kset); } diff --git a/fs/namespace.c b/fs/namespace.c index 06083885b21e..a4a3f70e7e26 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -41,7 +41,7 @@ static struct kmem_cache *mnt_cache __read_mostly; static struct rw_semaphore namespace_sem; /* /sys/fs */ -decl_subsys(fs, NULL, NULL); +decl_subsys(fs, NULL); EXPORT_SYMBOL_GPL(fs_subsys); static inline unsigned long hash(struct vfsmount *mnt, struct dentry *dentry) diff --git a/fs/ocfs2/cluster/masklog.c b/fs/ocfs2/cluster/masklog.c index a4882c8df945..dead319932b3 100644 --- a/fs/ocfs2/cluster/masklog.c +++ b/fs/ocfs2/cluster/masklog.c @@ -157,7 +157,7 @@ int mlog_sys_init(struct kset *o2cb_subsys) mlog_attr_ptrs[i] = NULL; kobject_set_name(&mlog_kset.kobj, "logmask"); - kobj_set_kset_s(&mlog_kset, *o2cb_subsys); + mlog_kset.kobj.kset = o2cb_subsys; return kset_register(&mlog_kset); } diff --git a/fs/ocfs2/cluster/sys.c b/fs/ocfs2/cluster/sys.c index 64f6f378fd09..880d0138bb0a 100644 --- a/fs/ocfs2/cluster/sys.c +++ b/fs/ocfs2/cluster/sys.c @@ -72,7 +72,7 @@ static struct kobj_type o2cb_subsys_type = { }; /* gives us o2cb_subsys */ -static decl_subsys(o2cb, NULL, NULL); +static decl_subsys(o2cb, NULL); static ssize_t o2cb_show(struct kobject * kobj, struct attribute * attr, char * buffer) diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c index 09a0611b3364..387a63662793 100644 --- a/fs/sysfs/file.c +++ b/fs/sysfs/file.c @@ -365,9 +365,7 @@ static int sysfs_open_file(struct inode *inode, struct file *file) /* if the kobject has no ktype, then we assume that it is a subsystem * itself, and use ops for it. */ - if (kobj->kset && kobj->kset->ktype) - ops = kobj->kset->ktype->sysfs_ops; - else if (kobj->ktype) + if (kobj->ktype) ops = kobj->ktype->sysfs_ops; else ops = &subsys_sysfs_ops; diff --git a/include/linux/kobject.h b/include/linux/kobject.h index e2b8c3dae425..5031565ab30d 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -135,7 +135,6 @@ struct kset_uevent_ops { * define the attribute callbacks and other common events that happen to * a kobject. * - * @ktype: the struct kobj_type for this specific kset * @list: the list of all kobjects for this kset * @list_lock: a lock for iterating over the kobjects * @kobj: the embedded kobject for this kset (recursion, isn't it fun...) @@ -145,7 +144,6 @@ struct kset_uevent_ops { * desired. */ struct kset { - struct kobj_type *ktype; struct list_head list; spinlock_t list_lock; struct kobject kobj; @@ -173,12 +171,9 @@ static inline void kset_put(struct kset * k) kobject_put(&k->kobj); } -static inline struct kobj_type * get_ktype(struct kobject * k) +static inline struct kobj_type *get_ktype(struct kobject *kobj) { - if (k->kset && k->kset->ktype) - return k->kset->ktype; - else - return k->ktype; + return kobj->ktype; } extern struct kobject * kset_find_obj(struct kset *, const char *); @@ -191,16 +186,14 @@ extern struct kobject * kset_find_obj(struct kset *, const char *); #define set_kset_name(str) .kset = { .kobj = { .k_name = str } } -#define decl_subsys(_name,_type,_uevent_ops) \ +#define decl_subsys(_name,_uevent_ops) \ struct kset _name##_subsys = { \ .kobj = { .k_name = __stringify(_name) }, \ - .ktype = _type, \ .uevent_ops =_uevent_ops, \ } -#define decl_subsys_name(_varname,_name,_type,_uevent_ops) \ +#define decl_subsys_name(_varname,_name,_uevent_ops) \ struct kset _varname##_subsys = { \ .kobj = { .k_name = __stringify(_name) }, \ - .ktype = _type, \ .uevent_ops =_uevent_ops, \ } diff --git a/kernel/ksysfs.c b/kernel/ksysfs.c index 65daa5373ca6..094e2bc101a8 100644 --- a/kernel/ksysfs.c +++ b/kernel/ksysfs.c @@ -94,7 +94,7 @@ static struct bin_attribute notes_attr = { .read = ¬es_read, }; -decl_subsys(kernel, NULL, NULL); +decl_subsys(kernel, NULL); EXPORT_SYMBOL_GPL(kernel_subsys); static struct attribute * kernel_attrs[] = { diff --git a/kernel/module.c b/kernel/module.c index c2e3e2e98801..68df79738b3b 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -1223,7 +1223,7 @@ int mod_sysfs_init(struct module *mod) err = kobject_set_name(&mod->mkobj.kobj, "%s", mod->name); if (err) goto out; - kobj_set_kset_s(&mod->mkobj, module_subsys); + mod->mkobj.kobj.kset = &module_subsys; mod->mkobj.mod = mod; kobject_init(&mod->mkobj.kobj); diff --git a/kernel/params.c b/kernel/params.c index 7686417ee00e..9f051824097d 100644 --- a/kernel/params.c +++ b/kernel/params.c @@ -30,6 +30,8 @@ #define DEBUGP(fmt, a...) #endif +static struct kobj_type module_ktype; + static inline char dash2underscore(char c) { if (c == '-') @@ -560,7 +562,8 @@ static void __init kernel_param_sysfs_setup(const char *name, BUG_ON(!mk); mk->mod = THIS_MODULE; - kobj_set_kset_s(mk, module_subsys); + mk->kobj.kset = &module_subsys; + mk->kobj.ktype = &module_ktype; kobject_set_name(&mk->kobj, name); kobject_init(&mk->kobj); ret = kobject_add(&mk->kobj); @@ -679,8 +682,6 @@ static struct sysfs_ops module_sysfs_ops = { .store = module_attr_store, }; -static struct kobj_type module_ktype; - static int uevent_filter(struct kset *kset, struct kobject *kobj) { struct kobj_type *ktype = get_ktype(kobj); @@ -694,7 +695,7 @@ static struct kset_uevent_ops module_uevent_ops = { .filter = uevent_filter, }; -decl_subsys(module, &module_ktype, &module_uevent_ops); +decl_subsys(module, &module_uevent_ops); int module_sysfs_initialized; static void module_release(struct kobject *kobj) diff --git a/kernel/power/main.c b/kernel/power/main.c index f71c9504a5c5..1ef31c91ce0e 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -276,7 +276,7 @@ EXPORT_SYMBOL(pm_suspend); #endif /* CONFIG_SUSPEND */ -decl_subsys(power,NULL,NULL); +decl_subsys(power, NULL); /** diff --git a/mm/slub.c b/mm/slub.c index 474945ecd89d..40bdf41035e5 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -3962,7 +3962,7 @@ static struct kset_uevent_ops slab_uevent_ops = { .filter = uevent_filter, }; -static decl_subsys(slab, &slab_ktype, &slab_uevent_ops); +static decl_subsys(slab, &slab_uevent_ops); #define ID_STR_LENGTH 64 @@ -4025,8 +4025,9 @@ static int sysfs_slab_add(struct kmem_cache *s) name = create_unique_id(s); } - kobj_set_kset_s(s, slab_subsys); kobject_set_name(&s->kobj, name); + s->kobj.kset = &slab_subsys; + s->kobj.ktype = &slab_ktype; kobject_init(&s->kobj); err = kobject_add(&s->kobj); if (err) diff --git a/security/inode.c b/security/inode.c index b28a8acae34d..9e42f5f705b2 100644 --- a/security/inode.c +++ b/security/inode.c @@ -315,13 +315,13 @@ void securityfs_remove(struct dentry *dentry) } EXPORT_SYMBOL_GPL(securityfs_remove); -static decl_subsys(security, NULL, NULL); +static decl_subsys(security, NULL); static int __init securityfs_init(void) { int retval; - kobj_set_kset_s(&security_subsys, kernel_subsys); + security_subsys.kobj.kset = &kernel_subsys; retval = subsystem_register(&security_subsys); if (retval) return retval; -- cgit v1.2.3-59-g8ed1b From 12d03da7c19366268bdbc9fb0cd08d719c0cc283 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 16 Oct 2007 10:11:44 -0600 Subject: kobject: remove kobj_set_kset_s as no one is using it anymore What a confusing name for a macro... Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/kobject.h | 18 ------------------ 1 file changed, 18 deletions(-) diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 5031565ab30d..0b97b3a53917 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -202,24 +202,6 @@ extern struct kset kernel_subsys; /* The global /sys/hypervisor/ subsystem */ extern struct kset hypervisor_subsys; -/* - * Helpers for setting the kset of registered objects. - * Often, a registered object belongs to a kset embedded in a - * subsystem. These do no magic, just make the resulting code - * easier to follow. - */ - -/** - * kobj_set_kset_s(obj,subsys) - set kset for embedded kobject. - * @obj: ptr to some object type. - * @subsys: a subsystem object (not a ptr). - * - * Can be used for any object type with an embedded ->kobj. - */ - -#define kobj_set_kset_s(obj,subsys) \ - (obj)->kobj.kset = &(subsys) - extern int __must_check subsystem_register(struct kset *); extern void subsystem_unregister(struct kset *); -- cgit v1.2.3-59-g8ed1b From b727c702896f88d2ff6c3e03bd011d7c3dffe3e1 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 27 Sep 2007 14:48:53 -0700 Subject: kset: add kset_create_and_add function Now ksets can be dynamically created on the fly, no static definitions are required. Thanks to Miklos for hints on how to make this work better for the callers. And thanks to Kay for finding some stupid bugs in my original version and pointing out that we need to handle the fact that kobject's can have a kset as a parent and to handle that properly in kobject_add(). Cc: Kay Sievers Cc: Miklos Szeredi Signed-off-by: Greg Kroah-Hartman --- include/linux/kobject.h | 4 ++- lib/kobject.c | 92 ++++++++++++++++++++++++++++++++++++++++++++++++- 2 files changed, 94 insertions(+), 2 deletions(-) diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 0b97b3a53917..f91aeb745664 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -150,11 +150,13 @@ struct kset { struct kset_uevent_ops *uevent_ops; }; - extern void kset_init(struct kset * k); extern int __must_check kset_add(struct kset * k); extern int __must_check kset_register(struct kset * k); extern void kset_unregister(struct kset * k); +extern struct kset * __must_check kset_create_and_add(const char *name, + struct kset_uevent_ops *u, + struct kobject *parent_kobj); static inline struct kset * to_kset(struct kobject * kobj) { diff --git a/lib/kobject.c b/lib/kobject.c index 8f249408b2ec..4fb27ba28807 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -186,8 +186,15 @@ int kobject_add(struct kobject * kobj) if (kobj->kset) { spin_lock(&kobj->kset->list_lock); - if (!parent) + if (!parent) { parent = kobject_get(&kobj->kset->kobj); + /* + * If the kset is our parent, get a second + * reference, we drop both the kset and the + * parent ref on cleanup + */ + kobject_get(parent); + } list_add_tail(&kobj->entry,&kobj->kset->list); spin_unlock(&kobj->kset->list_lock); @@ -787,6 +794,89 @@ int subsys_create_file(struct kset *s, struct subsys_attribute *a) return error; } +static void kset_release(struct kobject *kobj) +{ + struct kset *kset = container_of(kobj, struct kset, kobj); + pr_debug("kset %s: now freed\n", kobject_name(kobj)); + kfree(kset); +} + +static struct kobj_type kset_type = { + .release = kset_release, +}; + +/** + * kset_create - create a struct kset dynamically + * + * @name: the name for the kset + * @uevent_ops: a struct kset_uevent_ops for the kset + * @parent_kobj: the parent kobject of this kset, if any. + * + * This function creates a kset structure dynamically. This structure can + * then be registered with the system and show up in sysfs with a call to + * kset_register(). When you are finished with this structure, if + * kset_register() has been called, call kset_unregister() and the + * structure will be dynamically freed when it is no longer being used. + * + * If the kset was not able to be created, NULL will be returned. + */ +static struct kset *kset_create(const char *name, + struct kset_uevent_ops *uevent_ops, + struct kobject *parent_kobj) +{ + struct kset *kset; + + kset = kzalloc(sizeof(*kset), GFP_KERNEL); + if (!kset) + return NULL; + kobject_set_name(&kset->kobj, name); + kset->uevent_ops = uevent_ops; + kset->kobj.parent = parent_kobj; + + /* + * The kobject of this kset will have a type of kset_type and belong to + * no kset itself. That way we can properly free it when it is + * finished being used. + */ + kset->kobj.ktype = &kset_type; + kset->kobj.kset = NULL; + + return kset; +} + +/** + * kset_create_and_add - create a struct kset dynamically and add it to sysfs + * + * @name: the name for the kset + * @uevent_ops: a struct kset_uevent_ops for the kset + * @parent_kobj: the parent kobject of this kset, if any. + * + * This function creates a kset structure dynamically and registers it + * with sysfs. When you are finished with this structure, call + * kset_unregister() and the structure will be dynamically freed when it + * is no longer being used. + * + * If the kset was not able to be created, NULL will be returned. + */ +struct kset *kset_create_and_add(const char *name, + struct kset_uevent_ops *uevent_ops, + struct kobject *parent_kobj) +{ + struct kset *kset; + int error; + + kset = kset_create(name, uevent_ops, parent_kobj); + if (!kset) + return NULL; + error = kset_register(kset); + if (error) { + kfree(kset); + return NULL; + } + return kset; +} +EXPORT_SYMBOL_GPL(kset_create_and_add); + EXPORT_SYMBOL(kobject_init); EXPORT_SYMBOL(kobject_register); EXPORT_SYMBOL(kobject_unregister); -- cgit v1.2.3-59-g8ed1b From 3f9e3ee9dc3605e5c593b5d708494571fb0d3970 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 5 Nov 2007 13:16:15 -0800 Subject: kobject: add kobject_create_and_add function This lets users create dynamic kobjects much easier. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/kobject.h | 3 ++ lib/kobject.c | 81 ++++++++++++++++++++++++++++++++++++++----------- 2 files changed, 66 insertions(+), 18 deletions(-) diff --git a/include/linux/kobject.h b/include/linux/kobject.h index f91aeb745664..33e7a6142a75 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -91,6 +91,9 @@ extern int __must_check kobject_init_and_add(struct kobject *kobj, extern void kobject_del(struct kobject *); +extern struct kobject * __must_check kobject_create_and_add(const char *name, + struct kobject *parent); + extern int __must_check kobject_rename(struct kobject *, const char *new_name); extern int __must_check kobject_move(struct kobject *, struct kobject *); diff --git a/lib/kobject.c b/lib/kobject.c index 4fb27ba28807..98422a3eeffc 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -619,18 +619,69 @@ void kobject_put(struct kobject * kobj) kref_put(&kobj->kref, kobject_release); } - -static void dir_release(struct kobject *kobj) +static void dynamic_kobj_release(struct kobject *kobj) { + pr_debug("%s: freeing %s\n", __FUNCTION__, kobject_name(kobj)); kfree(kobj); } -static struct kobj_type dir_ktype = { - .release = dir_release, - .sysfs_ops = NULL, - .default_attrs = NULL, +static struct kobj_type dynamic_kobj_ktype = { + .release = dynamic_kobj_release, }; +/* + * kobject_create - create a struct kobject dynamically + * + * This function creates a kobject structure dynamically and sets it up + * to be a "dynamic" kobject with a default release function set up. + * + * If the kobject was not able to be created, NULL will be returned. + */ +static struct kobject *kobject_create(void) +{ + struct kobject *kobj; + + kobj = kzalloc(sizeof(*kobj), GFP_KERNEL); + if (!kobj) + return NULL; + + kobject_init_ng(kobj, &dynamic_kobj_ktype); + return kobj; +} + +/** + * kobject_create_and_add - create a struct kobject dynamically and register it with sysfs + * + * @name: the name for the kset + * @parent: the parent kobject of this kobject, if any. + * + * This function creates a kset structure dynamically and registers it + * with sysfs. When you are finished with this structure, call + * kobject_unregister() and the structure will be dynamically freed when + * it is no longer being used. + * + * If the kobject was not able to be created, NULL will be returned. + */ +struct kobject *kobject_create_and_add(const char *name, struct kobject *parent) +{ + struct kobject *kobj; + int retval; + + kobj = kobject_create(); + if (!kobj) + return NULL; + + retval = kobject_add_ng(kobj, parent, "%s", name); + if (retval) { + printk(KERN_WARNING "%s: kobject_add error: %d\n", + __FUNCTION__, retval); + kobject_put(kobj); + kobj = NULL; + } + return kobj; +} +EXPORT_SYMBOL_GPL(kobject_create_and_add); + /** * kobject_kset_add_dir - add sub directory of object. * @kset: kset the directory is belongs to. @@ -645,23 +696,17 @@ struct kobject *kobject_kset_add_dir(struct kset *kset, struct kobject *k; int ret; - if (!parent) - return NULL; - - k = kzalloc(sizeof(*k), GFP_KERNEL); + k = kobject_create(); if (!k) return NULL; k->kset = kset; - k->parent = parent; - k->ktype = &dir_ktype; - kobject_set_name(k, name); - ret = kobject_register(k); + ret = kobject_add_ng(k, parent, "%s", name); if (ret < 0) { - printk(KERN_WARNING "%s: kobject_register error: %d\n", + printk(KERN_WARNING "%s: kobject_add error: %d\n", __func__, ret); - kobject_del(k); - return NULL; + kobject_put(k); + k = NULL; } return k; @@ -676,7 +721,7 @@ struct kobject *kobject_kset_add_dir(struct kset *kset, */ struct kobject *kobject_add_dir(struct kobject *parent, const char *name) { - return kobject_kset_add_dir(NULL, parent, name); + return kobject_create_and_add(name, parent); } /** -- cgit v1.2.3-59-g8ed1b From 4ff6abff832fbc6cb1d769f6106c841bc2b09f63 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 5 Nov 2007 22:24:43 -0800 Subject: kobject: get rid of kobject_add_dir kobject_create_and_add is the same as kobject_add_dir, so drop kobject_add_dir. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 3 ++- fs/partitions/check.c | 6 +++--- include/linux/kobject.h | 1 - kernel/module.c | 6 +++--- lib/kobject.c | 12 ------------ 5 files changed, 8 insertions(+), 20 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index c8f2ac03d46d..992eba3289bd 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -562,7 +562,8 @@ static struct kobject *virtual_device_parent(struct device *dev) static struct kobject *virtual_dir = NULL; if (!virtual_dir) - virtual_dir = kobject_add_dir(&devices_subsys.kobj, "virtual"); + virtual_dir = kobject_create_and_add("virtual", + &devices_subsys.kobj); return virtual_dir; } diff --git a/fs/partitions/check.c b/fs/partitions/check.c index 722e12e5acc7..69685bb51c62 100644 --- a/fs/partitions/check.c +++ b/fs/partitions/check.c @@ -335,7 +335,7 @@ static inline void partition_sysfs_add_subdir(struct hd_struct *p) struct kobject *k; k = kobject_get(&p->kobj); - p->holder_dir = kobject_add_dir(k, "holders"); + p->holder_dir = kobject_create_and_add("holders", k); kobject_put(k); } @@ -344,8 +344,8 @@ static inline void disk_sysfs_add_subdirs(struct gendisk *disk) struct kobject *k; k = kobject_get(&disk->kobj); - disk->holder_dir = kobject_add_dir(k, "holders"); - disk->slave_dir = kobject_add_dir(k, "slaves"); + disk->holder_dir = kobject_create_and_add("holders", k); + disk->slave_dir = kobject_create_and_add("slaves", k); kobject_put(k); } diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 33e7a6142a75..7b09136fb211 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -105,7 +105,6 @@ extern void kobject_put(struct kobject *); extern struct kobject *kobject_kset_add_dir(struct kset *kset, struct kobject *, const char *); -extern struct kobject *kobject_add_dir(struct kobject *, const char *); extern char * kobject_get_path(struct kobject *, gfp_t); diff --git a/kernel/module.c b/kernel/module.c index 68df79738b3b..55142775c581 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -1122,7 +1122,7 @@ static void add_notes_attrs(struct module *mod, unsigned int nsect, ++loaded; } - notes_attrs->dir = kobject_add_dir(&mod->mkobj.kobj, "notes"); + notes_attrs->dir = kobject_create_and_add("notes", &mod->mkobj.kobj); if (!notes_attrs->dir) goto out; @@ -1243,7 +1243,7 @@ int mod_sysfs_setup(struct module *mod, if (err) goto out; - mod->holders_dir = kobject_add_dir(&mod->mkobj.kobj, "holders"); + mod->holders_dir = kobject_create_and_add("holders", &mod->mkobj.kobj); if (!mod->holders_dir) { err = -ENOMEM; goto out_unreg; @@ -2521,7 +2521,7 @@ static void module_create_drivers_dir(struct module_kobject *mk) if (!mk || mk->drivers_dir) return; - mk->drivers_dir = kobject_add_dir(&mk->kobj, "drivers"); + mk->drivers_dir = kobject_create_and_add("drivers", &mk->kobj); } void module_add_driver(struct module *mod, struct device_driver *drv) diff --git a/lib/kobject.c b/lib/kobject.c index 98422a3eeffc..96b61d9a9284 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -712,18 +712,6 @@ struct kobject *kobject_kset_add_dir(struct kset *kset, return k; } -/** - * kobject_add_dir - add sub directory of object. - * @parent: object in which a directory is created. - * @name: directory name. - * - * Add a plain directory object as child of given object. - */ -struct kobject *kobject_add_dir(struct kobject *parent, const char *name) -{ - return kobject_create_and_add(name, parent); -} - /** * kset_init - initialize a kset for use * @k: kset -- cgit v1.2.3-59-g8ed1b From 43968d2f1648f4dc92437dc0363a3e88377445b3 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 5 Nov 2007 22:24:43 -0800 Subject: kobject: get rid of kobject_kset_add_dir kobject_kset_add_dir is only called in one place so remove it and use kobject_create() instead. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 16 ++++++++++++++-- include/linux/kobject.h | 4 +--- lib/kobject.c | 37 +++++-------------------------------- 3 files changed, 20 insertions(+), 37 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index 992eba3289bd..7762ee86697d 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -571,6 +571,8 @@ static struct kobject *virtual_device_parent(struct device *dev) static struct kobject * get_device_parent(struct device *dev, struct device *parent) { + int retval; + if (dev->class) { struct kobject *kobj = NULL; struct kobject *parent_kobj; @@ -600,8 +602,18 @@ static struct kobject * get_device_parent(struct device *dev, return kobj; /* or create a new class-directory at the parent device */ - return kobject_kset_add_dir(&dev->class->class_dirs, - parent_kobj, dev->class->name); + k = kobject_create(); + if (!k) + return NULL; + k->kset = &dev->class->class_dirs; + retval = kobject_add_ng(k, parent_kobj, "%s", dev->class->name); + if (retval < 0) { + kobject_put(k); + return NULL; + } + /* Do not emit a uevent, as it's not needed for this + * "class glue" directory. */ + return k; } if (parent) diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 7b09136fb211..718b48811288 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -91,6 +91,7 @@ extern int __must_check kobject_init_and_add(struct kobject *kobj, extern void kobject_del(struct kobject *); +extern struct kobject * __must_check kobject_create(void); extern struct kobject * __must_check kobject_create_and_add(const char *name, struct kobject *parent); @@ -103,9 +104,6 @@ extern void kobject_unregister(struct kobject *); extern struct kobject * kobject_get(struct kobject *); extern void kobject_put(struct kobject *); -extern struct kobject *kobject_kset_add_dir(struct kset *kset, - struct kobject *, const char *); - extern char * kobject_get_path(struct kobject *, gfp_t); struct kobj_type { diff --git a/lib/kobject.c b/lib/kobject.c index 96b61d9a9284..67c3d38d48f0 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -629,15 +629,18 @@ static struct kobj_type dynamic_kobj_ktype = { .release = dynamic_kobj_release, }; -/* +/** * kobject_create - create a struct kobject dynamically * * This function creates a kobject structure dynamically and sets it up * to be a "dynamic" kobject with a default release function set up. * * If the kobject was not able to be created, NULL will be returned. + * The kobject structure returned from here must be cleaned up with a + * call to kobject_put() and not kfree(), as kobject_init_ng() has + * already been called on this structure. */ -static struct kobject *kobject_create(void) +struct kobject *kobject_create(void) { struct kobject *kobj; @@ -682,36 +685,6 @@ struct kobject *kobject_create_and_add(const char *name, struct kobject *parent) } EXPORT_SYMBOL_GPL(kobject_create_and_add); -/** - * kobject_kset_add_dir - add sub directory of object. - * @kset: kset the directory is belongs to. - * @parent: object in which a directory is created. - * @name: directory name. - * - * Add a plain directory object as child of given object. - */ -struct kobject *kobject_kset_add_dir(struct kset *kset, - struct kobject *parent, const char *name) -{ - struct kobject *k; - int ret; - - k = kobject_create(); - if (!k) - return NULL; - - k->kset = kset; - ret = kobject_add_ng(k, parent, "%s", name); - if (ret < 0) { - printk(KERN_WARNING "%s: kobject_add error: %d\n", - __func__, ret); - kobject_put(k); - k = NULL; - } - - return k; -} - /** * kset_init - initialize a kset for use * @k: kset -- cgit v1.2.3-59-g8ed1b From 5c89e17e9c2bc03ed16320967832b33b174e6234 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 29 Oct 2007 20:13:17 +0100 Subject: kobject: convert fuse to use kobject_create We don't need a kset here, a simple kobject will do just fine, so dynamically create the kobject and use it. Cc: Kay Sievers Cc: Miklos Szeredi Signed-off-by: Greg Kroah-Hartman --- fs/fuse/inode.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index f5e4182c482e..92118066f1d6 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -744,9 +744,6 @@ static inline void unregister_fuseblk(void) } #endif -static decl_subsys(fuse, NULL); -static decl_subsys(connections, NULL); - static void fuse_inode_init_once(struct kmem_cache *cachep, void *foo) { struct inode * inode = foo; @@ -791,32 +788,37 @@ static void fuse_fs_cleanup(void) kmem_cache_destroy(fuse_inode_cachep); } +static struct kobject *fuse_kobj; +static struct kobject *connections_kobj; + static int fuse_sysfs_init(void) { int err; - fuse_subsys.kobj.kset = &fs_subsys; - err = subsystem_register(&fuse_subsys); - if (err) + fuse_kobj = kobject_create_and_add("fuse", &fs_subsys.kobj); + if (!fuse_kobj) { + err = -ENOMEM; goto out_err; + } - connections_subsys.kobj.kset = &fuse_subsys; - err = subsystem_register(&connections_subsys); - if (err) + connections_kobj = kobject_create_and_add("connections", fuse_kobj); + if (!connections_kobj) { + err = -ENOMEM; goto out_fuse_unregister; + } return 0; out_fuse_unregister: - subsystem_unregister(&fuse_subsys); + kobject_unregister(fuse_kobj); out_err: return err; } static void fuse_sysfs_cleanup(void) { - subsystem_unregister(&connections_subsys); - subsystem_unregister(&fuse_subsys); + kobject_unregister(connections_kobj); + kobject_unregister(fuse_kobj); } static int __init fuse_init(void) -- cgit v1.2.3-59-g8ed1b From 69d8e1389551b107b1a8ec70c280cb7a56096666 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 29 Oct 2007 20:13:17 +0100 Subject: kobject: convert securityfs to use kobject_create We don't need a kset here, a simple kobject will do just fine, so dynamically create the kobject and use it. Cc: Kay Sievers Acked-by: Chris Wright Signed-off-by: Greg Kroah-Hartman --- security/inode.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/security/inode.c b/security/inode.c index 9e42f5f705b2..dfc5978d4298 100644 --- a/security/inode.c +++ b/security/inode.c @@ -315,20 +315,19 @@ void securityfs_remove(struct dentry *dentry) } EXPORT_SYMBOL_GPL(securityfs_remove); -static decl_subsys(security, NULL); +static struct kobject *security_kobj; static int __init securityfs_init(void) { int retval; - security_subsys.kobj.kset = &kernel_subsys; - retval = subsystem_register(&security_subsys); - if (retval) - return retval; + security_kobj = kobject_create_and_add("security", &kernel_subsys.kobj); + if (!security_kobj) + return -EINVAL; retval = register_filesystem(&fs_type); if (retval) - subsystem_unregister(&security_subsys); + kobject_unregister(security_kobj); return retval; } -- cgit v1.2.3-59-g8ed1b From 191e186bd0589e28496745275157323a6f7902ca Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 29 Oct 2007 20:13:17 +0100 Subject: kobject: convert debugfs to use kobject_create We don't need a kset here, a simple kobject will do just fine, so dynamically create the kobject and use it. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- fs/debugfs/inode.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c index f7f13516fc1a..667214200b03 100644 --- a/fs/debugfs/inode.c +++ b/fs/debugfs/inode.c @@ -426,20 +426,19 @@ exit: } EXPORT_SYMBOL_GPL(debugfs_rename); -static decl_subsys(debug, NULL); +static struct kobject *debug_kobj; static int __init debugfs_init(void) { int retval; - debug_subsys.kobj.kset = &kernel_subsys; - retval = subsystem_register(&debug_subsys); - if (retval) - return retval; + debug_kobj = kobject_create_and_add("debug", &kernel_subsys.kobj); + if (!debug_kobj) + return -EINVAL; retval = register_filesystem(&debug_fs_type); if (retval) - subsystem_unregister(&debug_subsys); + kobject_unregister(debug_kobj); return retval; } @@ -447,7 +446,7 @@ static void __exit debugfs_exit(void) { simple_release_fs(&debugfs_mount, &debugfs_mount_count); unregister_filesystem(&debug_fs_type); - subsystem_unregister(&debug_subsys); + kobject_unregister(debug_kobj); } core_initcall(debugfs_init); -- cgit v1.2.3-59-g8ed1b From 3794491d0c4b6355c55b0379f003900e57666a97 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 29 Oct 2007 20:13:17 +0100 Subject: kobject: convert configfs to use kobject_create We don't need a kset here, a simple kobject will do just fine, so dynamically create the kobject and use it. Cc: Kay Sievers Signed-off-by: Joel Becker Signed-off-by: Greg Kroah-Hartman --- fs/configfs/mount.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/fs/configfs/mount.c b/fs/configfs/mount.c index 374ddbd6648d..13300466464b 100644 --- a/fs/configfs/mount.c +++ b/fs/configfs/mount.c @@ -128,7 +128,7 @@ void configfs_release_fs(void) } -static decl_subsys(config, NULL); +static struct kobject *config_kobj; static int __init configfs_init(void) { @@ -140,9 +140,8 @@ static int __init configfs_init(void) if (!configfs_dir_cachep) goto out; - config_subsys.kobj.kset = &kernel_subsys; - err = subsystem_register(&config_subsys); - if (err) { + config_kobj = kobject_create_and_add("config", &kernel_subsys.kobj); + if (!config_kobj) { kmem_cache_destroy(configfs_dir_cachep); configfs_dir_cachep = NULL; goto out; @@ -151,7 +150,7 @@ static int __init configfs_init(void) err = register_filesystem(&configfs_fs_type); if (err) { printk(KERN_ERR "configfs: Unable to register filesystem!\n"); - subsystem_unregister(&config_subsys); + kobject_unregister(config_kobj); kmem_cache_destroy(configfs_dir_cachep); configfs_dir_cachep = NULL; goto out; @@ -160,7 +159,7 @@ static int __init configfs_init(void) err = configfs_inode_init(); if (err) { unregister_filesystem(&configfs_fs_type); - subsystem_unregister(&config_subsys); + kobject_unregister(config_kobj); kmem_cache_destroy(configfs_dir_cachep); configfs_dir_cachep = NULL; } @@ -171,7 +170,7 @@ out: static void __exit configfs_exit(void) { unregister_filesystem(&configfs_fs_type); - subsystem_unregister(&config_subsys); + kobject_unregister(config_kobj); kmem_cache_destroy(configfs_dir_cachep); configfs_dir_cachep = NULL; configfs_inode_exit(); -- cgit v1.2.3-59-g8ed1b From 917e865df7eb020f20ffc2b4204f282a587df94f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 29 Oct 2007 20:13:17 +0100 Subject: kset: convert ecryptfs to use kset_create Dynamically create the kset instead of declaring it statically. Cc: Kay Sievers Cc: Mike Halcrow Cc: Phillip Hellewell Signed-off-by: Greg Kroah-Hartman --- fs/ecryptfs/main.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c index fe2f44fa17cc..4750d82c3db9 100644 --- a/fs/ecryptfs/main.c +++ b/fs/ecryptfs/main.c @@ -734,7 +734,7 @@ static int ecryptfs_init_kmem_caches(void) return 0; } -static decl_subsys(ecryptfs, NULL); +static struct kset *ecryptfs_kset; static ssize_t version_show(struct kset *kset, char *buff) { @@ -798,18 +798,17 @@ static int do_sysfs_registration(void) { int rc; - ecryptfs_subsys.kobj.kset = &fs_subsys; - rc = subsystem_register(&ecryptfs_subsys); - if (rc) { - printk(KERN_ERR - "Unable to register ecryptfs sysfs subsystem\n"); + ecryptfs_kset = kset_create_and_add("ecryptfs", NULL, &fs_subsys.kobj); + if (!ecryptfs_kset) { + printk(KERN_ERR "Unable to create ecryptfs kset\n"); + rc = -ENOMEM; goto out; } - rc = sysfs_create_group(&ecryptfs_subsys.kobj, &attr_group); + rc = sysfs_create_group(&ecryptfs_kset->kobj, &attr_group); if (rc) { printk(KERN_ERR "Unable to create ecryptfs version attributes\n"); - subsystem_unregister(&ecryptfs_subsys); + kset_unregister(ecryptfs_kset); } out: return rc; @@ -817,8 +816,8 @@ out: static void do_sysfs_unregistration(void) { - sysfs_remove_group(&ecryptfs_subsys.kobj, &attr_group); - subsystem_unregister(&ecryptfs_subsys); + sysfs_remove_group(&ecryptfs_kset->kobj, &attr_group); + kset_unregister(ecryptfs_kset); } static int __init ecryptfs_init(void) -- cgit v1.2.3-59-g8ed1b From 00d2666623368ffd39afc875ff8a2eead2a0436c Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 29 Oct 2007 14:17:23 -0600 Subject: kobject: convert main fs kobject to use kobject_create This also renames fs_subsys to fs_kobj to catch all current users with a build error instead of a build warning which can easily be missed. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- fs/ecryptfs/main.c | 2 +- fs/fuse/inode.c | 2 +- fs/gfs2/sys.c | 2 +- fs/namespace.c | 11 +++++------ include/linux/fs.h | 2 +- 5 files changed, 9 insertions(+), 10 deletions(-) diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c index 4750d82c3db9..bdeac3877a84 100644 --- a/fs/ecryptfs/main.c +++ b/fs/ecryptfs/main.c @@ -798,7 +798,7 @@ static int do_sysfs_registration(void) { int rc; - ecryptfs_kset = kset_create_and_add("ecryptfs", NULL, &fs_subsys.kobj); + ecryptfs_kset = kset_create_and_add("ecryptfs", NULL, fs_kobj); if (!ecryptfs_kset) { printk(KERN_ERR "Unable to create ecryptfs kset\n"); rc = -ENOMEM; diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 92118066f1d6..e6e23a2ad4b3 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -795,7 +795,7 @@ static int fuse_sysfs_init(void) { int err; - fuse_kobj = kobject_create_and_add("fuse", &fs_subsys.kobj); + fuse_kobj = kobject_create_and_add("fuse", fs_kobj); if (!fuse_kobj) { err = -ENOMEM; goto out_err; diff --git a/fs/gfs2/sys.c b/fs/gfs2/sys.c index d7fa54443f0c..a0bdc4a3acf9 100644 --- a/fs/gfs2/sys.c +++ b/fs/gfs2/sys.c @@ -549,7 +549,7 @@ int gfs2_sys_init(void) gfs2_sys_margs = NULL; spin_lock_init(&gfs2_sys_margs_lock); kobject_set_name(&gfs2_kset.kobj, "gfs2"); - gfs2_kset.kobj.kset = &fs_subsys; + gfs2_kset.kobj.parent = fs_kobj; return kset_register(&gfs2_kset); } diff --git a/fs/namespace.c b/fs/namespace.c index a4a3f70e7e26..61bf376e29e8 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -41,8 +41,8 @@ static struct kmem_cache *mnt_cache __read_mostly; static struct rw_semaphore namespace_sem; /* /sys/fs */ -decl_subsys(fs, NULL); -EXPORT_SYMBOL_GPL(fs_subsys); +struct kobject *fs_kobj; +EXPORT_SYMBOL_GPL(fs_kobj); static inline unsigned long hash(struct vfsmount *mnt, struct dentry *dentry) { @@ -1861,10 +1861,9 @@ void __init mnt_init(void) if (err) printk(KERN_WARNING "%s: sysfs_init error: %d\n", __FUNCTION__, err); - err = subsystem_register(&fs_subsys); - if (err) - printk(KERN_WARNING "%s: subsystem_register error: %d\n", - __FUNCTION__, err); + fs_kobj = kobject_create_and_add("fs", NULL); + if (!fs_kobj) + printk(KERN_WARNING "%s: kobj create error\n", __FUNCTION__); init_rootfs(); init_mount_tree(); } diff --git a/include/linux/fs.h b/include/linux/fs.h index b3ec4a496d64..21398a5d688d 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1476,7 +1476,7 @@ extern void drop_collected_mounts(struct vfsmount *); extern int vfs_statfs(struct dentry *, struct kstatfs *); /* /sys/fs */ -extern struct kset fs_subsys; +extern struct kobject *fs_kobj; #define FLOCK_VERIFY_READ 1 #define FLOCK_VERIFY_WRITE 2 -- cgit v1.2.3-59-g8ed1b From 9bec101a0c38d559a8c95b44d850cd09a7b4edef Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 29 Oct 2007 20:13:17 +0100 Subject: kset: convert gfs2 to use kset_create Dynamically create the kset instead of declaring it statically. Cc: Kay Sievers Cc: Steven Whitehouse Signed-off-by: Greg Kroah-Hartman --- fs/gfs2/sys.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/fs/gfs2/sys.c b/fs/gfs2/sys.c index a0bdc4a3acf9..44cfaae92e76 100644 --- a/fs/gfs2/sys.c +++ b/fs/gfs2/sys.c @@ -221,7 +221,7 @@ static struct kobj_type gfs2_ktype = { .sysfs_ops = &gfs2_attr_ops, }; -static struct kset gfs2_kset; +static struct kset *gfs2_kset; /* * display struct lm_lockstruct fields @@ -493,7 +493,7 @@ int gfs2_sys_fs_add(struct gfs2_sbd *sdp) { int error; - sdp->sd_kobj.kset = &gfs2_kset; + sdp->sd_kobj.kset = gfs2_kset; sdp->sd_kobj.ktype = &gfs2_ktype; error = kobject_set_name(&sdp->sd_kobj, "%s", sdp->sd_table_name); @@ -548,14 +548,15 @@ int gfs2_sys_init(void) { gfs2_sys_margs = NULL; spin_lock_init(&gfs2_sys_margs_lock); - kobject_set_name(&gfs2_kset.kobj, "gfs2"); - gfs2_kset.kobj.parent = fs_kobj; - return kset_register(&gfs2_kset); + gfs2_kset = kset_create_and_add("gfs2", NULL, fs_kobj); + if (!gfs2_kset) + return -ENOMEM; + return 0; } void gfs2_sys_uninit(void) { kfree(gfs2_sys_margs); - kset_unregister(&gfs2_kset); + kset_unregister(gfs2_kset); } -- cgit v1.2.3-59-g8ed1b From 136a27507fd09006973f11b17ca971d4c176a06a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 29 Oct 2007 20:13:17 +0100 Subject: kset: convert gfs2 dlm to use kset_create Dynamically create the kset instead of declaring it statically. Cc: Kay Sievers Cc: Steven Whitehouse Signed-off-by: Greg Kroah-Hartman --- fs/gfs2/locking/dlm/sysfs.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) diff --git a/fs/gfs2/locking/dlm/sysfs.c b/fs/gfs2/locking/dlm/sysfs.c index 93e66b22757f..0a8614088ec6 100644 --- a/fs/gfs2/locking/dlm/sysfs.c +++ b/fs/gfs2/locking/dlm/sysfs.c @@ -189,7 +189,7 @@ static struct kobj_type gdlm_ktype = { .sysfs_ops = &gdlm_attr_ops, }; -static struct kset gdlm_kset; +static struct kset *gdlm_kset; int gdlm_kobject_setup(struct gdlm_ls *ls, struct kobject *fskobj) { @@ -201,7 +201,7 @@ int gdlm_kobject_setup(struct gdlm_ls *ls, struct kobject *fskobj) return error; } - ls->kobj.kset = &gdlm_kset; + ls->kobj.kset = gdlm_kset; ls->kobj.ktype = &gdlm_ktype; ls->kobj.parent = fskobj; @@ -219,19 +219,17 @@ void gdlm_kobject_release(struct gdlm_ls *ls) int gdlm_sysfs_init(void) { - int error; - - kobject_set_name(&gdlm_kset.kobj, "lock_dlm"); - gdlm_kset.kobj.kset = &kernel_subsys; - error = kset_register(&gdlm_kset); - if (error) - printk("lock_dlm: cannot register kset %d\n", error); - - return error; + gdlm_kset = kset_create_and_add("lock_dlm", NULL, + &kernel_subsys.kobj); + if (!gdlm_kset) { + printk(KERN_WARNING "%s: can not create kset\n", __FUNCTION__); + return -ENOMEM; + } + return 0; } void gdlm_sysfs_exit(void) { - kset_unregister(&gdlm_kset); + kset_unregister(gdlm_kset); } -- cgit v1.2.3-59-g8ed1b From d405936b322220dc5cca9d2b58ef1911ae8efec9 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 29 Oct 2007 20:13:17 +0100 Subject: kset: convert dlm to use kset_create Dynamically create the kset instead of declaring it statically. Cc: Kay Sievers Cc: Steven Whitehouse Signed-off-by: Greg Kroah-Hartman --- fs/dlm/lockspace.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-) diff --git a/fs/dlm/lockspace.c b/fs/dlm/lockspace.c index 18e4a17b9bee..83a9c4dd5114 100644 --- a/fs/dlm/lockspace.c +++ b/fs/dlm/lockspace.c @@ -166,7 +166,7 @@ static struct kobj_type dlm_ktype = { .release = lockspace_kobj_release, }; -static struct kset dlm_kset; +static struct kset *dlm_kset; static int kobject_setup(struct dlm_ls *ls) { @@ -180,7 +180,7 @@ static int kobject_setup(struct dlm_ls *ls) if (error) return error; - ls->ls_kobj.kset = &dlm_kset; + ls->ls_kobj.kset = dlm_kset; ls->ls_kobj.ktype = &dlm_ktype; return 0; } @@ -218,24 +218,22 @@ static int do_uevent(struct dlm_ls *ls, int in) int dlm_lockspace_init(void) { - int error; - ls_count = 0; mutex_init(&ls_lock); INIT_LIST_HEAD(&lslist); spin_lock_init(&lslist_lock); - kobject_set_name(&dlm_kset.kobj, "dlm"); - dlm_kset.kobj.kset = &kernel_subsys; - error = kset_register(&dlm_kset); - if (error) - printk("dlm_lockspace_init: cannot register kset %d\n", error); - return error; + dlm_kset = kset_create_and_add("dlm", NULL, &kernel_subsys.kobj); + if (!dlm_kset) { + printk(KERN_WARNING "%s: can not create kset\n", __FUNCTION__); + return -ENOMEM; + } + return 0; } void dlm_lockspace_exit(void) { - kset_unregister(&dlm_kset); + kset_unregister(dlm_kset); } static int dlm_scand(void *data) -- cgit v1.2.3-59-g8ed1b From 81ace5cd8fcb55e144f496af40d4275b03252456 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 29 Oct 2007 23:22:26 -0500 Subject: kset: convert pci hotplug to use kset_create_and_add This also renames pci_hotplug_slots_subsys to pcis_hotplug_slots_kset catch all current users with a build error instead of a build warning which can easily be missed. Cc: Kay Sievers Cc: Kristen Carlson Accardi Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/acpiphp_ibm.c | 4 ++-- drivers/pci/hotplug/pci_hotplug_core.c | 23 +++++++++++------------ drivers/pci/hotplug/rpadlpar_sysfs.c | 2 +- include/linux/pci_hotplug.h | 2 +- 4 files changed, 15 insertions(+), 16 deletions(-) diff --git a/drivers/pci/hotplug/acpiphp_ibm.c b/drivers/pci/hotplug/acpiphp_ibm.c index 47d26b65e99a..750ebd7a4c10 100644 --- a/drivers/pci/hotplug/acpiphp_ibm.c +++ b/drivers/pci/hotplug/acpiphp_ibm.c @@ -429,7 +429,7 @@ static int __init ibm_acpiphp_init(void) int retval = 0; acpi_status status; struct acpi_device *device; - struct kobject *sysdir = &pci_hotplug_slots_subsys.kobj; + struct kobject *sysdir = &pci_hotplug_slots_kset->kobj; dbg("%s\n", __FUNCTION__); @@ -476,7 +476,7 @@ init_return: static void __exit ibm_acpiphp_exit(void) { acpi_status status; - struct kobject *sysdir = &pci_hotplug_slots_subsys.kobj; + struct kobject *sysdir = &pci_hotplug_slots_kset->kobj; dbg("%s\n", __FUNCTION__); diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index ce1cff0fdeca..175e0c8599e3 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -61,7 +61,7 @@ static int debug; static LIST_HEAD(pci_hotplug_slot_list); -struct kset pci_hotplug_slots_subsys; +struct kset *pci_hotplug_slots_kset; static ssize_t hotplug_slot_attr_show(struct kobject *kobj, struct attribute *attr, char *buf) @@ -96,8 +96,6 @@ static struct kobj_type hotplug_slot_ktype = { .release = &hotplug_slot_release, }; -decl_subsys_name(pci_hotplug_slots, slots, NULL); - /* these strings match up with the values in pci_bus_speed */ static char *pci_bus_speed_strings[] = { "33 MHz PCI", /* 0x00 */ @@ -633,7 +631,7 @@ int pci_hp_register (struct hotplug_slot *slot) } kobject_set_name(&slot->kobj, "%s", slot->name); - slot->kobj.kset = &pci_hotplug_slots_subsys; + slot->kobj.kset = pci_hotplug_slots_kset; slot->kobj.ktype = &hotplug_slot_ktype; /* this can fail if we have already registered a slot with the same name */ @@ -702,10 +700,11 @@ static int __init pci_hotplug_init (void) { int result; - pci_hotplug_slots_subsys.kobj.kset = &pci_bus_type.subsys; - result = subsystem_register(&pci_hotplug_slots_subsys); - if (result) { - err("Register subsys with error %d\n", result); + pci_hotplug_slots_kset = kset_create_and_add("slots", NULL, + &pci_bus_type.subsys.kobj); + if (!pci_hotplug_slots_kset) { + result = -ENOMEM; + err("Register subsys error\n"); goto exit; } result = cpci_hotplug_init(debug); @@ -716,9 +715,9 @@ static int __init pci_hotplug_init (void) info (DRIVER_DESC " version: " DRIVER_VERSION "\n"); goto exit; - + err_subsys: - subsystem_unregister(&pci_hotplug_slots_subsys); + kset_unregister(pci_hotplug_slots_kset); exit: return result; } @@ -726,7 +725,7 @@ exit: static void __exit pci_hotplug_exit (void) { cpci_hotplug_exit(); - subsystem_unregister(&pci_hotplug_slots_subsys); + kset_unregister(pci_hotplug_slots_kset); } module_init(pci_hotplug_init); @@ -738,7 +737,7 @@ MODULE_LICENSE("GPL"); module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "Debugging mode enabled or not"); -EXPORT_SYMBOL_GPL(pci_hotplug_slots_subsys); +EXPORT_SYMBOL_GPL(pci_hotplug_slots_kset); EXPORT_SYMBOL_GPL(pci_hp_register); EXPORT_SYMBOL_GPL(pci_hp_deregister); EXPORT_SYMBOL_GPL(pci_hp_change_slot_info); diff --git a/drivers/pci/hotplug/rpadlpar_sysfs.c b/drivers/pci/hotplug/rpadlpar_sysfs.c index 76090937c758..5c3ddb60a002 100644 --- a/drivers/pci/hotplug/rpadlpar_sysfs.c +++ b/drivers/pci/hotplug/rpadlpar_sysfs.c @@ -130,7 +130,7 @@ struct kobj_type ktype_dlpar_io = { struct kset dlpar_io_kset = { .kobj = {.ktype = &ktype_dlpar_io, - .parent = &pci_hotplug_slots_subsys.kobj}, + .parent = &pci_hotplug_slots_kset->kobj}, }; int dlpar_sysfs_init(void) diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h index ab4cb6ecd47c..8f67e8f2a3cc 100644 --- a/include/linux/pci_hotplug.h +++ b/include/linux/pci_hotplug.h @@ -174,7 +174,7 @@ extern int pci_hp_register (struct hotplug_slot *slot); extern int pci_hp_deregister (struct hotplug_slot *slot); extern int __must_check pci_hp_change_slot_info (struct hotplug_slot *slot, struct hotplug_slot_info *info); -extern struct kset pci_hotplug_slots_subsys; +extern struct kset *pci_hotplug_slots_kset; /* PCI Setting Record (Type 0) */ struct hpp_type0 { -- cgit v1.2.3-59-g8ed1b From e5e38a86c0bbe8475543f10f0a48393a45df5182 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 29 Oct 2007 23:22:26 -0500 Subject: kset: remove decl_subsys_name The last user of this macro (pci hotplug core) is now switched over to using a dynamic kset, so this macro is no longer needed at all. Cc: Kay Sievers Cc: Kristen Carlson Accardi Signed-off-by: Greg Kroah-Hartman --- include/linux/kobject.h | 5 ----- 1 file changed, 5 deletions(-) diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 718b48811288..390ae14b73e8 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -193,11 +193,6 @@ struct kset _name##_subsys = { \ .kobj = { .k_name = __stringify(_name) }, \ .uevent_ops =_uevent_ops, \ } -#define decl_subsys_name(_varname,_name,_uevent_ops) \ -struct kset _varname##_subsys = { \ - .kobj = { .k_name = __stringify(_name) }, \ - .uevent_ops =_uevent_ops, \ -} /* The global /sys/kernel/ subsystem for people to chain off of */ extern struct kset kernel_subsys; -- cgit v1.2.3-59-g8ed1b From bd35b93d8049ab47b5bfaf6b10ba39badf21d1c3 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 29 Oct 2007 20:13:17 +0100 Subject: kset: convert kernel_subsys to use kset_create Dynamically create the kset instead of declaring it statically. We also rename kernel_subsys to kernel_kset to catch all users of this symbol with a build error instead of an easy-to-ignore build warning. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- fs/configfs/mount.c | 2 +- fs/debugfs/inode.c | 2 +- fs/dlm/lockspace.c | 2 +- fs/gfs2/locking/dlm/sysfs.c | 3 +-- include/linux/kobject.h | 4 ++-- kernel/ksysfs.c | 42 ++++++++++++++++++++++++++++++------------ kernel/user.c | 4 ++-- security/inode.c | 2 +- 8 files changed, 39 insertions(+), 22 deletions(-) diff --git a/fs/configfs/mount.c b/fs/configfs/mount.c index 13300466464b..c4ee7f05de8b 100644 --- a/fs/configfs/mount.c +++ b/fs/configfs/mount.c @@ -140,7 +140,7 @@ static int __init configfs_init(void) if (!configfs_dir_cachep) goto out; - config_kobj = kobject_create_and_add("config", &kernel_subsys.kobj); + config_kobj = kobject_create_and_add("config", &kernel_kset->kobj); if (!config_kobj) { kmem_cache_destroy(configfs_dir_cachep); configfs_dir_cachep = NULL; diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c index 667214200b03..5ce92c3d3b59 100644 --- a/fs/debugfs/inode.c +++ b/fs/debugfs/inode.c @@ -432,7 +432,7 @@ static int __init debugfs_init(void) { int retval; - debug_kobj = kobject_create_and_add("debug", &kernel_subsys.kobj); + debug_kobj = kobject_create_and_add("debug", &kernel_kset->kobj); if (!debug_kobj) return -EINVAL; diff --git a/fs/dlm/lockspace.c b/fs/dlm/lockspace.c index 83a9c4dd5114..0828beb2d35d 100644 --- a/fs/dlm/lockspace.c +++ b/fs/dlm/lockspace.c @@ -223,7 +223,7 @@ int dlm_lockspace_init(void) INIT_LIST_HEAD(&lslist); spin_lock_init(&lslist_lock); - dlm_kset = kset_create_and_add("dlm", NULL, &kernel_subsys.kobj); + dlm_kset = kset_create_and_add("dlm", NULL, &kernel_kset->kobj); if (!dlm_kset) { printk(KERN_WARNING "%s: can not create kset\n", __FUNCTION__); return -ENOMEM; diff --git a/fs/gfs2/locking/dlm/sysfs.c b/fs/gfs2/locking/dlm/sysfs.c index 0a8614088ec6..1a92b6f7bc10 100644 --- a/fs/gfs2/locking/dlm/sysfs.c +++ b/fs/gfs2/locking/dlm/sysfs.c @@ -219,8 +219,7 @@ void gdlm_kobject_release(struct gdlm_ls *ls) int gdlm_sysfs_init(void) { - gdlm_kset = kset_create_and_add("lock_dlm", NULL, - &kernel_subsys.kobj); + gdlm_kset = kset_create_and_add("lock_dlm", NULL, &kernel_kset->kobj); if (!gdlm_kset) { printk(KERN_WARNING "%s: can not create kset\n", __FUNCTION__); return -ENOMEM; diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 390ae14b73e8..bd741e86c11e 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -194,8 +194,8 @@ struct kset _name##_subsys = { \ .uevent_ops =_uevent_ops, \ } -/* The global /sys/kernel/ subsystem for people to chain off of */ -extern struct kset kernel_subsys; +/* The global /sys/kernel/ kset for people to chain off of */ +extern struct kset *kernel_kset; /* The global /sys/hypervisor/ subsystem */ extern struct kset hypervisor_subsys; diff --git a/kernel/ksysfs.c b/kernel/ksysfs.c index 094e2bc101a8..cf02d4ba9add 100644 --- a/kernel/ksysfs.c +++ b/kernel/ksysfs.c @@ -94,8 +94,8 @@ static struct bin_attribute notes_attr = { .read = ¬es_read, }; -decl_subsys(kernel, NULL); -EXPORT_SYMBOL_GPL(kernel_subsys); +struct kset *kernel_kset; +EXPORT_SYMBOL_GPL(kernel_kset); static struct attribute * kernel_attrs[] = { #if defined(CONFIG_HOTPLUG) && defined(CONFIG_NET) @@ -116,24 +116,42 @@ static struct attribute_group kernel_attr_group = { static int __init ksysfs_init(void) { - int error = subsystem_register(&kernel_subsys); - if (!error) - error = sysfs_create_group(&kernel_subsys.kobj, - &kernel_attr_group); + int error; - if (!error && notes_size > 0) { + kernel_kset = kset_create_and_add("kernel", NULL, NULL); + if (!kernel_kset) { + error = -ENOMEM; + goto exit; + } + error = sysfs_create_group(&kernel_kset->kobj, &kernel_attr_group); + if (error) + goto kset_exit; + + if (notes_size > 0) { notes_attr.size = notes_size; - error = sysfs_create_bin_file(&kernel_subsys.kobj, - ¬es_attr); + error = sysfs_create_bin_file(&kernel_kset->kobj, ¬es_attr); + if (error) + goto group_exit; } /* * Create "/sys/kernel/uids" directory and corresponding root user's * directory under it. */ - if (!error) - error = uids_kobject_init(); - + error = uids_kobject_init(); + if (error) + goto notes_exit; + + return 0; + +notes_exit: + if (notes_size > 0) + sysfs_remove_bin_file(&kernel_kset->kobj, ¬es_attr); +group_exit: + sysfs_remove_group(&kernel_kset->kobj, &kernel_attr_group); +kset_exit: + kset_unregister(kernel_kset); +exit: return error; } diff --git a/kernel/user.c b/kernel/user.c index 8320a87f3e5a..80f1116b8fcd 100644 --- a/kernel/user.c +++ b/kernel/user.c @@ -198,8 +198,8 @@ int __init uids_kobject_init(void) int error; /* create under /sys/kernel dir */ - uids_kobject.parent = &kernel_subsys.kobj; - uids_kobject.kset = &kernel_subsys; + uids_kobject.parent = &kernel_kset->kobj; + uids_kobject.kset = kernel_kset; kobject_set_name(&uids_kobject, "uids"); kobject_init(&uids_kobject); diff --git a/security/inode.c b/security/inode.c index dfc5978d4298..dbe040ac0549 100644 --- a/security/inode.c +++ b/security/inode.c @@ -321,7 +321,7 @@ static int __init securityfs_init(void) { int retval; - security_kobj = kobject_create_and_add("security", &kernel_subsys.kobj); + security_kobj = kobject_create_and_add("security", &kernel_kset->kobj); if (!security_kobj) return -EINVAL; -- cgit v1.2.3-59-g8ed1b From 59a548338ac6c9d7549c54278d0f724088585928 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 29 Oct 2007 23:22:26 -0500 Subject: kset: convert drivers/base/bus.c to use kset_create Dynamically create the kset instead of declaring it statically. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/bus.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/base/bus.c b/drivers/base/bus.c index 630956037e18..e3b101077804 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -166,7 +166,7 @@ static struct kset_uevent_ops bus_uevent_ops = { .filter = bus_uevent_filter, }; -static decl_subsys(bus, &bus_uevent_ops); +static struct kset *bus_kset; #ifdef CONFIG_HOTPLUG @@ -767,7 +767,7 @@ EXPORT_SYMBOL_GPL(device_reprobe); #if 0 struct bus_type * find_bus(char * name) { - struct kobject * k = kset_find_obj(&bus_subsys.kset, name); + struct kobject * k = kset_find_obj(bus_kset, name); return k ? to_bus(k) : NULL; } #endif /* 0 */ @@ -851,7 +851,7 @@ int bus_register(struct bus_type * bus) if (retval) goto out; - bus->subsys.kobj.kset = &bus_subsys; + bus->subsys.kobj.kset = bus_kset; bus->subsys.kobj.ktype = &bus_ktype; retval = subsystem_register(&bus->subsys); @@ -935,7 +935,10 @@ EXPORT_SYMBOL_GPL(bus_unregister_notifier); int __init buses_init(void) { - return subsystem_register(&bus_subsys); + bus_kset = kset_create_and_add("bus", &bus_uevent_ops, NULL); + if (!bus_kset) + return -ENOMEM; + return 0; } -- cgit v1.2.3-59-g8ed1b From 443dbf9007854ef2892226615e23b60a35b89697 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 29 Oct 2007 23:22:26 -0500 Subject: kset: convert drivers/base/class.c to use kset_create Dynamically create the kset instead of declaring it statically. The class_obj subsystem is not yet converted as it is more complex and should be going away soon with the removal of class_device from the kernel tree. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/class.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/base/class.c b/drivers/base/class.c index 8ad98924cddb..d8a92c650b43 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -71,7 +71,7 @@ static struct kobj_type class_ktype = { }; /* Hotplug events for classes go to the class_obj subsys */ -static decl_subsys(class, NULL); +static struct kset *class_kset; int class_create_file(struct class * cls, const struct class_attribute * attr) @@ -149,7 +149,7 @@ int class_register(struct class * cls) if (error) return error; - cls->subsys.kobj.kset = &class_subsys; + cls->subsys.kobj.kset = class_kset; cls->subsys.kobj.ktype = &class_ktype; error = subsystem_register(&cls->subsys); @@ -855,11 +855,9 @@ void class_interface_unregister(struct class_interface *class_intf) int __init classes_init(void) { - int retval; - - retval = subsystem_register(&class_subsys); - if (retval) - return retval; + class_kset = kset_create_and_add("class", NULL, NULL); + if (!class_kset) + return -ENOMEM; /* ick, this is ugly, the things we go through to keep from showing up * in sysfs... */ -- cgit v1.2.3-59-g8ed1b From b0d78e5549b44b3d64bf8b3ffe95280025ed102e Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 29 Oct 2007 23:22:26 -0500 Subject: kset: convert drivers/base/firmware.c to use kset_create Dynamically create the kset instead of declaring it statically. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/firmware.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/base/firmware.c b/drivers/base/firmware.c index 336be0450d54..6a4e494042f6 100644 --- a/drivers/base/firmware.c +++ b/drivers/base/firmware.c @@ -15,11 +15,11 @@ #include "base.h" -static decl_subsys(firmware, NULL); +static struct kset *firmware_kset; int firmware_register(struct kset *s) { - s->kobj.kset = &firmware_subsys; + s->kobj.kset = firmware_kset; s->kobj.ktype = NULL; return subsystem_register(s); } @@ -31,7 +31,10 @@ void firmware_unregister(struct kset *s) int __init firmware_init(void) { - return subsystem_register(&firmware_subsys); + firmware_kset = kset_create_and_add("firmware", NULL, NULL); + if (!firmware_kset) + return -ENOMEM; + return 0; } EXPORT_SYMBOL_GPL(firmware_register); -- cgit v1.2.3-59-g8ed1b From 881c6cfd7c5edfe6129006e2404654bfe5911050 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 1 Nov 2007 09:29:06 -0600 Subject: kset: convert /sys/devices to use kset_create Dynamically create the kset instead of declaring it statically. We also rename devices_subsys to devices_kset to catch all users of the variable. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/base.h | 2 +- drivers/base/core.c | 16 ++++++++-------- drivers/base/power/shutdown.c | 2 +- drivers/base/sys.c | 4 +--- 4 files changed, 11 insertions(+), 13 deletions(-) diff --git a/drivers/base/base.h b/drivers/base/base.h index 10b2fb6c9ce6..7e309a49a711 100644 --- a/drivers/base/base.h +++ b/drivers/base/base.h @@ -44,4 +44,4 @@ extern char *make_class_name(const char *name, struct kobject *kobj); extern int devres_release_all(struct device *dev); -extern struct kset devices_subsys; +extern struct kset *devices_kset; diff --git a/drivers/base/core.c b/drivers/base/core.c index 7762ee86697d..d2de2d59af42 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -401,11 +401,8 @@ static ssize_t show_dev(struct device *dev, struct device_attribute *attr, static struct device_attribute devt_attr = __ATTR(dev, S_IRUGO, show_dev, NULL); -/* - * devices_subsys - structure to be registered with kobject core. - */ - -decl_subsys(devices, &device_uevent_ops); +/* kset to create /sys/devices/ */ +struct kset *devices_kset; /** @@ -525,7 +522,7 @@ static void klist_children_put(struct klist_node *n) void device_initialize(struct device *dev) { - dev->kobj.kset = &devices_subsys; + dev->kobj.kset = devices_kset; dev->kobj.ktype = &device_ktype; kobject_init(&dev->kobj); klist_init(&dev->klist_children, klist_children_get, @@ -563,7 +560,7 @@ static struct kobject *virtual_device_parent(struct device *dev) if (!virtual_dir) virtual_dir = kobject_create_and_add("virtual", - &devices_subsys.kobj); + &devices_kset->kobj); return virtual_dir; } @@ -1097,7 +1094,10 @@ struct device * device_find_child(struct device *parent, void *data, int __init devices_init(void) { - return subsystem_register(&devices_subsys); + devices_kset = kset_create_and_add("devices", &device_uevent_ops, NULL); + if (!devices_kset) + return -ENOMEM; + return 0; } EXPORT_SYMBOL_GPL(device_for_each_child); diff --git a/drivers/base/power/shutdown.c b/drivers/base/power/shutdown.c index 56e8eaaac012..f51cbc1d402c 100644 --- a/drivers/base/power/shutdown.c +++ b/drivers/base/power/shutdown.c @@ -34,7 +34,7 @@ void device_shutdown(void) { struct device * dev, *devn; - list_for_each_entry_safe_reverse(dev, devn, &devices_subsys.list, + list_for_each_entry_safe_reverse(dev, devn, &devices_kset->list, kobj.entry) { if (dev->bus && dev->bus->shutdown) { dev_dbg(dev, "shutdown\n"); diff --git a/drivers/base/sys.c b/drivers/base/sys.c index 7cf19fc318da..7693c95848e6 100644 --- a/drivers/base/sys.c +++ b/drivers/base/sys.c @@ -25,8 +25,6 @@ #include "base.h" -extern struct kset devices_subsys; - #define to_sysdev(k) container_of(k, struct sys_device, kobj) #define to_sysdev_attr(a) container_of(a, struct sysdev_attribute, attr) @@ -459,7 +457,7 @@ int sysdev_resume(void) int __init system_bus_init(void) { - system_subsys.kobj.parent = &devices_subsys.kobj; + system_subsys.kobj.parent = &devices_kset->kobj; return subsystem_register(&system_subsys); } -- cgit v1.2.3-59-g8ed1b From 2d72fc00a1fb055e6127ccd30cac3f0eafaa98d0 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 1 Nov 2007 09:29:06 -0600 Subject: kobject: convert /sys/hypervisor to use kobject_create We don't need a kset here, a simple kobject will do just fine, so dynamically create the kobject and use it. We also rename hypervisor_subsys to hypervisor_kset to catch all users of the variable. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- arch/s390/hypfs/inode.c | 2 +- drivers/base/hypervisor.c | 12 ++++++++---- include/linux/kobject.h | 4 ++-- 3 files changed, 11 insertions(+), 7 deletions(-) diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c index c022ccc04d41..b0ad479e7487 100644 --- a/arch/s390/hypfs/inode.c +++ b/arch/s390/hypfs/inode.c @@ -506,7 +506,7 @@ static int __init hypfs_init(void) goto fail_diag; } } - s390_subsys.kobj.kset = &hypervisor_subsys; + s390_subsys.kobj.parent = hypervisor_kobj; rc = subsystem_register(&s390_subsys); if (rc) goto fail_sysfs; diff --git a/drivers/base/hypervisor.c b/drivers/base/hypervisor.c index 14e75e9ec783..6428cba3aadd 100644 --- a/drivers/base/hypervisor.c +++ b/drivers/base/hypervisor.c @@ -2,19 +2,23 @@ * hypervisor.c - /sys/hypervisor subsystem. * * Copyright (C) IBM Corp. 2006 + * Copyright (C) 2007 Greg Kroah-Hartman + * Copyright (C) 2007 Novell Inc. * * This file is released under the GPLv2 */ #include #include - #include "base.h" -decl_subsys(hypervisor, NULL); -EXPORT_SYMBOL_GPL(hypervisor_subsys); +struct kobject *hypervisor_kobj; +EXPORT_SYMBOL_GPL(hypervisor_kobj); int __init hypervisor_init(void) { - return subsystem_register(&hypervisor_subsys); + hypervisor_kobj = kobject_create_and_add("hypervisor", NULL); + if (!hypervisor_kobj) + return -ENOMEM; + return 0; } diff --git a/include/linux/kobject.h b/include/linux/kobject.h index bd741e86c11e..f2483f6fd639 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -196,8 +196,8 @@ struct kset _name##_subsys = { \ /* The global /sys/kernel/ kset for people to chain off of */ extern struct kset *kernel_kset; -/* The global /sys/hypervisor/ subsystem */ -extern struct kset hypervisor_subsys; +/* The global /sys/hypervisor/ kobject for people to chain off of */ +extern struct kobject *hypervisor_kobj; extern int __must_check subsystem_register(struct kset *); extern void subsystem_unregister(struct kset *); -- cgit v1.2.3-59-g8ed1b From 9b477705360c16198d7a4bd73d199f5a957585b0 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 1 Nov 2007 09:29:06 -0600 Subject: kobject: convert s390 hypervisor to use kobject_create We don't need a kset here, a simple kobject will do just fine, so dynamically create the kobject and use it. Thanks to Cornelia for the build fix. Cc: Kay Sievers Cc: Michael Holzheu Cc: Cornelia Huck Signed-off-by: Greg Kroah-Hartman --- arch/s390/hypfs/inode.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c index b0ad479e7487..631a6109f642 100644 --- a/arch/s390/hypfs/inode.c +++ b/arch/s390/hypfs/inode.c @@ -490,7 +490,7 @@ static struct super_operations hypfs_s_ops = { .show_options = hypfs_show_options, }; -static decl_subsys(s390, NULL); +static struct kobject *s390_kobj; static int __init hypfs_init(void) { @@ -506,17 +506,18 @@ static int __init hypfs_init(void) goto fail_diag; } } - s390_subsys.kobj.parent = hypervisor_kobj; - rc = subsystem_register(&s390_subsys); - if (rc) + s390_kobj = kobject_create_and_add("s390", hypervisor_kobj); + if (!s390_kobj) { + rc = -ENOMEM;; goto fail_sysfs; + } rc = register_filesystem(&hypfs_type); if (rc) goto fail_filesystem; return 0; fail_filesystem: - subsystem_unregister(&s390_subsys); + kobject_unregister(s390_kobj); fail_sysfs: if (!MACHINE_IS_VM) hypfs_diag_exit(); @@ -530,7 +531,7 @@ static void __exit hypfs_exit(void) if (!MACHINE_IS_VM) hypfs_diag_exit(); unregister_filesystem(&hypfs_type); - subsystem_unregister(&s390_subsys); + kobject_unregister(s390_kobj); } module_init(hypfs_init) -- cgit v1.2.3-59-g8ed1b From aade4041aa60a3ed335391ba308458e26f2dbc0a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 1 Nov 2007 09:29:06 -0600 Subject: kset: convert /sys/devices/system to use kset_create Dynamically create the kset instead of declaring it statically. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/sys.c | 27 +++++++++++---------------- 1 file changed, 11 insertions(+), 16 deletions(-) diff --git a/drivers/base/sys.c b/drivers/base/sys.c index 7693c95848e6..29eadc656bd1 100644 --- a/drivers/base/sys.c +++ b/drivers/base/sys.c @@ -126,19 +126,16 @@ void sysdev_class_remove_file(struct sysdev_class *c, } EXPORT_SYMBOL_GPL(sysdev_class_remove_file); -/* - * declare system_subsys - */ -static decl_subsys(system, NULL); +static struct kset *system_kset; int sysdev_class_register(struct sysdev_class * cls) { pr_debug("Registering sysdev class '%s'\n", kobject_name(&cls->kset.kobj)); INIT_LIST_HEAD(&cls->drivers); - cls->kset.kobj.parent = &system_subsys.kobj; + cls->kset.kobj.parent = &system_kset->kobj; cls->kset.kobj.ktype = &ktype_sysdev_class; - cls->kset.kobj.kset = &system_subsys; + cls->kset.kobj.kset = system_kset; return kset_register(&cls->kset); } @@ -297,8 +294,7 @@ void sysdev_shutdown(void) pr_debug("Shutting Down System Devices\n"); mutex_lock(&sysdev_drivers_lock); - list_for_each_entry_reverse(cls, &system_subsys.list, - kset.kobj.entry) { + list_for_each_entry_reverse(cls, &system_kset->list, kset.kobj.entry) { struct sys_device * sysdev; pr_debug("Shutting down type '%s':\n", @@ -360,9 +356,7 @@ int sysdev_suspend(pm_message_t state) pr_debug("Suspending System Devices\n"); - list_for_each_entry_reverse(cls, &system_subsys.list, - kset.kobj.entry) { - + list_for_each_entry_reverse(cls, &system_kset->list, kset.kobj.entry) { pr_debug("Suspending type '%s':\n", kobject_name(&cls->kset.kobj)); @@ -413,8 +407,7 @@ aux_driver: } /* resume other classes */ - list_for_each_entry_continue(cls, &system_subsys.list, - kset.kobj.entry) { + list_for_each_entry_continue(cls, &system_kset->list, kset.kobj.entry) { list_for_each_entry(err_dev, &cls->kset.list, kobj.entry) { pr_debug(" %s\n", kobject_name(&err_dev->kobj)); __sysdev_resume(err_dev); @@ -439,7 +432,7 @@ int sysdev_resume(void) pr_debug("Resuming System Devices\n"); - list_for_each_entry(cls, &system_subsys.list, kset.kobj.entry) { + list_for_each_entry(cls, &system_kset->list, kset.kobj.entry) { struct sys_device * sysdev; pr_debug("Resuming type '%s':\n", @@ -457,8 +450,10 @@ int sysdev_resume(void) int __init system_bus_init(void) { - system_subsys.kobj.parent = &devices_kset->kobj; - return subsystem_register(&system_subsys); + system_kset = kset_create_and_add("system", NULL, &devices_kset->kobj); + if (!system_kset) + return -ENOMEM; + return 0; } EXPORT_SYMBOL_GPL(sysdev_register); -- cgit v1.2.3-59-g8ed1b From 27c3a314d55b810f3b51902d1d815c714a7afbd2 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 1 Nov 2007 09:29:06 -0600 Subject: kset: convert slub to use kset_create Dynamically create the kset instead of declaring it statically. Cc: Kay Sievers Cc: Christoph Lameter Signed-off-by: Greg Kroah-Hartman --- mm/slub.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/mm/slub.c b/mm/slub.c index 40bdf41035e5..886131c5b5ca 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -3962,7 +3962,7 @@ static struct kset_uevent_ops slab_uevent_ops = { .filter = uevent_filter, }; -static decl_subsys(slab, &slab_uevent_ops); +static struct kset *slab_kset; #define ID_STR_LENGTH 64 @@ -4015,7 +4015,7 @@ static int sysfs_slab_add(struct kmem_cache *s) * This is typically the case for debug situations. In that * case we can catch duplicate names easily. */ - sysfs_remove_link(&slab_subsys.kobj, s->name); + sysfs_remove_link(&slab_kset->kobj, s->name); name = s->name; } else { /* @@ -4026,7 +4026,7 @@ static int sysfs_slab_add(struct kmem_cache *s) } kobject_set_name(&s->kobj, name); - s->kobj.kset = &slab_subsys; + s->kobj.kset = slab_kset; s->kobj.ktype = &slab_ktype; kobject_init(&s->kobj); err = kobject_add(&s->kobj); @@ -4071,9 +4071,8 @@ static int sysfs_slab_alias(struct kmem_cache *s, const char *name) /* * If we have a leftover link then remove it. */ - sysfs_remove_link(&slab_subsys.kobj, name); - return sysfs_create_link(&slab_subsys.kobj, - &s->kobj, name); + sysfs_remove_link(&slab_kset->kobj, name); + return sysfs_create_link(&slab_kset->kobj, &s->kobj, name); } al = kmalloc(sizeof(struct saved_alias), GFP_KERNEL); @@ -4092,8 +4091,8 @@ static int __init slab_sysfs_init(void) struct kmem_cache *s; int err; - err = subsystem_register(&slab_subsys); - if (err) { + slab_kset = kset_create_and_add("slab", &slab_uevent_ops, NULL); + if (!slab_kset) { printk(KERN_ERR "Cannot register slab subsystem.\n"); return -ENOSYS; } -- cgit v1.2.3-59-g8ed1b From 081248de0a0288a0ce4e1447a07ccf56aa4fae01 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 1 Nov 2007 09:29:06 -0600 Subject: kset: move /sys/slab to /sys/kernel/slab /sys/kernel is where these things should go. Also updated the documentation and tool that used this directory. Cc: Kay Sievers Acked-by: Christoph Lameter Signed-off-by: Greg Kroah-Hartman --- Documentation/vm/slabinfo.c | 2 +- Documentation/vm/slub.txt | 2 +- mm/slub.c | 3 ++- 3 files changed, 4 insertions(+), 3 deletions(-) diff --git a/Documentation/vm/slabinfo.c b/Documentation/vm/slabinfo.c index 7047696c47a1..488c1f31b992 100644 --- a/Documentation/vm/slabinfo.c +++ b/Documentation/vm/slabinfo.c @@ -1021,7 +1021,7 @@ void read_slab_dir(void) char *t; int count; - if (chdir("/sys/slab")) + if (chdir("/sys/kernel/slab")) fatal("SYSFS support for SLUB not active\n"); dir = opendir("."); diff --git a/Documentation/vm/slub.txt b/Documentation/vm/slub.txt index d17f324db9f5..dcf8bcf846d6 100644 --- a/Documentation/vm/slub.txt +++ b/Documentation/vm/slub.txt @@ -63,7 +63,7 @@ In case you forgot to enable debugging on the kernel command line: It is possible to enable debugging manually when the kernel is up. Look at the contents of: -/sys/slab// +/sys/kernel/slab// Look at the writable files. Writing 1 to them will enable the corresponding debug option. All options can be set on a slab that does diff --git a/mm/slub.c b/mm/slub.c index 886131c5b5ca..b6c79462157e 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -4091,7 +4091,8 @@ static int __init slab_sysfs_init(void) struct kmem_cache *s; int err; - slab_kset = kset_create_and_add("slab", &slab_uevent_ops, NULL); + slab_kset = kset_create_and_add("slab", &slab_uevent_ops, + &kernel_kset->kobj); if (!slab_kset) { printk(KERN_ERR "Cannot register slab subsystem.\n"); return -ENOSYS; -- cgit v1.2.3-59-g8ed1b From 7405c1e15edfe43b137bfbc5882f1af34d6d414d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 1 Nov 2007 10:39:50 -0700 Subject: kset: convert /sys/module to use kset_create Dynamically create the kset instead of declaring it statically. We also rename module_subsys to module_kset to catch all users of the variable. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/module.h | 4 +++- kernel/module.c | 7 +++---- kernel/params.c | 29 +++++++++-------------------- 3 files changed, 15 insertions(+), 25 deletions(-) diff --git a/include/linux/module.h b/include/linux/module.h index 2cbc0b87e329..fbe930b9b69c 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -574,7 +574,9 @@ struct device_driver; #ifdef CONFIG_SYSFS struct module; -extern struct kset module_subsys; +extern struct kset *module_kset; +extern struct kobj_type module_ktype; +extern int module_sysfs_initialized; int mod_sysfs_init(struct module *mod); int mod_sysfs_setup(struct module *mod, diff --git a/kernel/module.c b/kernel/module.c index 55142775c581..d03fcd9d652c 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -47,8 +47,6 @@ #include #include -extern int module_sysfs_initialized; - #if 0 #define DEBUGP printk #else @@ -1223,7 +1221,8 @@ int mod_sysfs_init(struct module *mod) err = kobject_set_name(&mod->mkobj.kobj, "%s", mod->name); if (err) goto out; - mod->mkobj.kobj.kset = &module_subsys; + mod->mkobj.kobj.kset = module_kset; + mod->mkobj.kobj.ktype = &module_ktype; mod->mkobj.mod = mod; kobject_init(&mod->mkobj.kobj); @@ -2539,7 +2538,7 @@ void module_add_driver(struct module *mod, struct device_driver *drv) struct kobject *mkobj; /* Lookup built-in module entry in /sys/modules */ - mkobj = kset_find_obj(&module_subsys, drv->mod_name); + mkobj = kset_find_obj(module_kset, drv->mod_name); if (mkobj) { mk = container_of(mkobj, struct module_kobject, kobj); /* remember our module structure */ diff --git a/kernel/params.c b/kernel/params.c index 9f051824097d..97e092312155 100644 --- a/kernel/params.c +++ b/kernel/params.c @@ -30,8 +30,6 @@ #define DEBUGP(fmt, a...) #endif -static struct kobj_type module_ktype; - static inline char dash2underscore(char c) { if (c == '-') @@ -562,7 +560,7 @@ static void __init kernel_param_sysfs_setup(const char *name, BUG_ON(!mk); mk->mod = THIS_MODULE; - mk->kobj.kset = &module_subsys; + mk->kobj.kset = module_kset; mk->kobj.ktype = &module_ktype; kobject_set_name(&mk->kobj, name); kobject_init(&mk->kobj); @@ -695,7 +693,7 @@ static struct kset_uevent_ops module_uevent_ops = { .filter = uevent_filter, }; -decl_subsys(module, &module_uevent_ops); +struct kset *module_kset; int module_sysfs_initialized; static void module_release(struct kobject *kobj) @@ -707,7 +705,7 @@ static void module_release(struct kobject *kobj) */ } -static struct kobj_type module_ktype = { +struct kobj_type module_ktype = { .sysfs_ops = &module_sysfs_ops, .release = module_release, }; @@ -717,13 +715,11 @@ static struct kobj_type module_ktype = { */ static int __init param_sysfs_init(void) { - int ret; - - ret = subsystem_register(&module_subsys); - if (ret < 0) { - printk(KERN_WARNING "%s (%d): subsystem_register error: %d\n", - __FILE__, __LINE__, ret); - return ret; + module_kset = kset_create_and_add("module", &module_uevent_ops, NULL); + if (!module_kset) { + printk(KERN_WARNING "%s (%d): error creating kset\n", + __FILE__, __LINE__); + return -ENOMEM; } module_sysfs_initialized = 1; @@ -733,14 +729,7 @@ static int __init param_sysfs_init(void) } subsys_initcall(param_sysfs_init); -#else -#if 0 -static struct sysfs_ops module_sysfs_ops = { - .show = NULL, - .store = NULL, -}; -#endif -#endif +#endif /* CONFIG_SYSFS */ EXPORT_SYMBOL(param_set_byte); EXPORT_SYMBOL(param_get_byte); -- cgit v1.2.3-59-g8ed1b From 039a5dcd2fc45188a2d522df630db4f7ef903a0f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 1 Nov 2007 10:39:50 -0700 Subject: kset: convert /sys/power to use kset_create Dynamically create the kset instead of declaring it statically. We also rename power_subsys to power_kset to catch all users of the variable and we properly export it so that people don't have to guess that it really is present in the system. The pseries code is wierd, why is it createing /sys/power if CONFIG_PM is disabled? Oh well, stupid big boxes ignoring config options... Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- arch/arm/mach-omap1/pm.c | 3 +-- arch/powerpc/platforms/pseries/power.c | 14 ++++++-------- include/linux/kobject.h | 2 ++ kernel/power/disk.c | 2 +- kernel/power/main.c | 11 +++++------ kernel/power/power.h | 2 -- 6 files changed, 15 insertions(+), 19 deletions(-) diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 3bf01e28df33..402113c72981 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -97,7 +97,6 @@ static struct subsys_attribute sleep_while_idle_attr = { .store = omap_pm_sleep_while_idle_store, }; -extern struct kset power_subsys; static void (*omap_sram_idle)(void) = NULL; static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL; @@ -726,7 +725,7 @@ static int __init omap_pm_init(void) omap_pm_init_proc(); #endif - error = subsys_create_file(&power_subsys, &sleep_while_idle_attr); + error = subsys_create_file(power_kset, &sleep_while_idle_attr); if (error) printk(KERN_ERR "subsys_create_file failed: %d\n", error); diff --git a/arch/powerpc/platforms/pseries/power.c b/arch/powerpc/platforms/pseries/power.c index 08d7a5007167..c36febe7ce7d 100644 --- a/arch/powerpc/platforms/pseries/power.c +++ b/arch/powerpc/platforms/pseries/power.c @@ -57,7 +57,7 @@ static struct subsys_attribute auto_poweron_attr = { }; #ifndef CONFIG_PM -decl_subsys(power, NULL); +struct kset *power_kset; static struct attribute *g[] = { &auto_poweron_attr.attr, @@ -70,18 +70,16 @@ static struct attribute_group attr_group = { static int __init pm_init(void) { - int error = subsystem_register(&power_subsys); - if (!error) - error = sysfs_create_group(&power_subsys.kobj, &attr_group); - return error; + power_kset = kset_create_and_add("power", NULL, NULL); + if (!power_kset) + return -ENOMEM; + return sysfs_create_group(&power_kset->kobj, &attr_group); } core_initcall(pm_init); #else -extern struct kset power_subsys; - static int __init apo_pm_init(void) { - return (subsys_create_file(&power_subsys, &auto_poweron_attr)); + return (subsys_create_file(power_kset, &auto_poweron_attr)); } __initcall(apo_pm_init); #endif diff --git a/include/linux/kobject.h b/include/linux/kobject.h index f2483f6fd639..a6dd669cda9d 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -198,6 +198,8 @@ struct kset _name##_subsys = { \ extern struct kset *kernel_kset; /* The global /sys/hypervisor/ kobject for people to chain off of */ extern struct kobject *hypervisor_kobj; +/* The global /sys/power/ kset for people to chain off of */ +extern struct kset *power_kset; extern int __must_check subsystem_register(struct kset *); extern void subsystem_unregister(struct kset *); diff --git a/kernel/power/disk.c b/kernel/power/disk.c index 05b64790fe83..c3f0e61365dd 100644 --- a/kernel/power/disk.c +++ b/kernel/power/disk.c @@ -708,7 +708,7 @@ static struct attribute_group attr_group = { static int __init pm_disk_init(void) { - return sysfs_create_group(&power_subsys.kobj, &attr_group); + return sysfs_create_group(&power_kset->kobj, &attr_group); } core_initcall(pm_disk_init); diff --git a/kernel/power/main.c b/kernel/power/main.c index 1ef31c91ce0e..dce2d76d66de 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -276,8 +276,7 @@ EXPORT_SYMBOL(pm_suspend); #endif /* CONFIG_SUSPEND */ -decl_subsys(power, NULL); - +struct kset *power_kset; /** * state - control system power state. @@ -386,10 +385,10 @@ static struct attribute_group attr_group = { static int __init pm_init(void) { - int error = subsystem_register(&power_subsys); - if (!error) - error = sysfs_create_group(&power_subsys.kobj,&attr_group); - return error; + power_kset = kset_create_and_add("power", NULL, NULL); + if (!power_kset) + return -ENOMEM; + return sysfs_create_group(&power_kset->kobj, &attr_group); } core_initcall(pm_init); diff --git a/kernel/power/power.h b/kernel/power/power.h index 195dc4611764..1083e6b188ab 100644 --- a/kernel/power/power.h +++ b/kernel/power/power.h @@ -63,8 +63,6 @@ static struct subsys_attribute _name##_attr = { \ .store = _name##_store, \ } -extern struct kset power_subsys; - /* Preferred image size in bytes (default 500 MB) */ extern unsigned long image_size; extern int in_suspend; -- cgit v1.2.3-59-g8ed1b From 3d8995963dfec66ef6270e729bf75903e9043f9d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 1 Nov 2007 13:31:26 -0700 Subject: kset: convert struct bus_device->devices to use kset_create Dynamically create the kset instead of declaring it statically. Having 3 static kobjects in one structure is not only foolish, but ripe for nasty race conditions if handled improperly. We also rename the field to catch any potential users of it (not that there should be outside of the driver core...) Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/bus.c | 19 ++++++++++--------- include/linux/device.h | 2 +- 2 files changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/base/bus.c b/drivers/base/bus.c index e3b101077804..b23eeb2d4ead 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -449,7 +449,7 @@ int bus_add_device(struct device * dev) error = device_add_attrs(bus, dev); if (error) goto out_put; - error = sysfs_create_link(&bus->devices.kobj, + error = sysfs_create_link(&bus->devices_kset->kobj, &dev->kobj, dev->bus_id); if (error) goto out_id; @@ -466,7 +466,7 @@ int bus_add_device(struct device * dev) out_deprecated: sysfs_remove_link(&dev->kobj, "subsystem"); out_subsys: - sysfs_remove_link(&bus->devices.kobj, dev->bus_id); + sysfs_remove_link(&bus->devices_kset->kobj, dev->bus_id); out_id: device_remove_attrs(bus, dev); out_put: @@ -512,7 +512,7 @@ void bus_remove_device(struct device * dev) if (dev->bus) { sysfs_remove_link(&dev->kobj, "subsystem"); remove_deprecated_bus_links(dev); - sysfs_remove_link(&dev->bus->devices.kobj, dev->bus_id); + sysfs_remove_link(&dev->bus->devices_kset->kobj, dev->bus_id); device_remove_attrs(dev->bus, dev); if (dev->is_registered) { dev->is_registered = 0; @@ -862,11 +862,12 @@ int bus_register(struct bus_type * bus) if (retval) goto bus_uevent_fail; - kobject_set_name(&bus->devices.kobj, "devices"); - bus->devices.kobj.parent = &bus->subsys.kobj; - retval = kset_register(&bus->devices); - if (retval) + bus->devices_kset = kset_create_and_add("devices", NULL, + &bus->subsys.kobj); + if (!bus->devices_kset) { + retval = -ENOMEM; goto bus_devices_fail; + } kobject_set_name(&bus->drivers.kobj, "drivers"); bus->drivers.kobj.parent = &bus->subsys.kobj; @@ -894,7 +895,7 @@ bus_attrs_fail: bus_probe_files_fail: kset_unregister(&bus->drivers); bus_drivers_fail: - kset_unregister(&bus->devices); + kset_unregister(bus->devices_kset); bus_devices_fail: bus_remove_file(bus, &bus_attr_uevent); bus_uevent_fail: @@ -916,7 +917,7 @@ void bus_unregister(struct bus_type * bus) bus_remove_attrs(bus); remove_probe_files(bus); kset_unregister(&bus->drivers); - kset_unregister(&bus->devices); + kset_unregister(bus->devices_kset); bus_remove_file(bus, &bus_attr_uevent); subsystem_unregister(&bus->subsys); } diff --git a/include/linux/device.h b/include/linux/device.h index dbbbe89e7267..82c277771376 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -55,7 +55,7 @@ struct bus_type { struct kset subsys; struct kset drivers; - struct kset devices; + struct kset *devices_kset; struct klist klist_devices; struct klist klist_drivers; -- cgit v1.2.3-59-g8ed1b From 6dcec2511ff55b4abaca7ad3433011a7c04c2430 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 1 Nov 2007 13:31:26 -0700 Subject: kset: convert struct bus_device->drivers to use kset_create Dynamically create the kset instead of declaring it statically. Having 3 static kobjects in one structure is not only foolish, but ripe for nasty race conditions if handled improperly. We also rename the field to catch any potential users of it (not that there should be outside of the driver core...) Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/bus.c | 15 ++++++++------- drivers/base/driver.c | 2 +- include/linux/device.h | 2 +- 3 files changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/base/bus.c b/drivers/base/bus.c index b23eeb2d4ead..6796d3e46053 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -638,7 +638,7 @@ int bus_add_driver(struct device_driver *drv) error = kobject_set_name(&drv->kobj, "%s", drv->name); if (error) goto out_put_bus; - drv->kobj.kset = &bus->drivers; + drv->kobj.kset = bus->drivers_kset; drv->kobj.ktype = &driver_ktype; error = kobject_register(&drv->kobj); if (error) @@ -869,11 +869,12 @@ int bus_register(struct bus_type * bus) goto bus_devices_fail; } - kobject_set_name(&bus->drivers.kobj, "drivers"); - bus->drivers.kobj.parent = &bus->subsys.kobj; - retval = kset_register(&bus->drivers); - if (retval) + bus->drivers_kset = kset_create_and_add("drivers", NULL, + &bus->subsys.kobj); + if (!bus->drivers_kset) { + retval = -ENOMEM; goto bus_drivers_fail; + } klist_init(&bus->klist_devices, klist_devices_get, klist_devices_put); klist_init(&bus->klist_drivers, NULL, NULL); @@ -893,7 +894,7 @@ int bus_register(struct bus_type * bus) bus_attrs_fail: remove_probe_files(bus); bus_probe_files_fail: - kset_unregister(&bus->drivers); + kset_unregister(bus->drivers_kset); bus_drivers_fail: kset_unregister(bus->devices_kset); bus_devices_fail: @@ -916,7 +917,7 @@ void bus_unregister(struct bus_type * bus) pr_debug("bus %s: unregistering\n", bus->name); bus_remove_attrs(bus); remove_probe_files(bus); - kset_unregister(&bus->drivers); + kset_unregister(bus->drivers_kset); kset_unregister(bus->devices_kset); bus_remove_file(bus, &bus_attr_uevent); subsystem_unregister(&bus->subsys); diff --git a/drivers/base/driver.c b/drivers/base/driver.c index eb11475293ed..1c9770dfb801 100644 --- a/drivers/base/driver.c +++ b/drivers/base/driver.c @@ -185,7 +185,7 @@ void driver_unregister(struct device_driver * drv) */ struct device_driver *driver_find(const char *name, struct bus_type *bus) { - struct kobject *k = kset_find_obj(&bus->drivers, name); + struct kobject *k = kset_find_obj(bus->drivers_kset, name); if (k) return to_drv(k); return NULL; diff --git a/include/linux/device.h b/include/linux/device.h index 82c277771376..110ace0dec3f 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -54,7 +54,7 @@ struct bus_type { struct module * owner; struct kset subsys; - struct kset drivers; + struct kset *drivers_kset; struct kset *devices_kset; struct klist klist_devices; struct klist klist_drivers; -- cgit v1.2.3-59-g8ed1b From 23b5212cc7422f475b82124334b64277b5b43013 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Fri, 2 Nov 2007 13:47:53 +0100 Subject: Driver Core: add kobj_attribute handling Add kobj_sysfs_ops to replace subsys_sysfs_ops. There is no need for special kset operations, we want to be able to use simple attribute operations at any kobject, not only ksets. The whole concept of any default sysfs attribute operations will go away with the upcoming removal of subsys_sysfs_ops. Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/kobject.h | 10 ++++++++++ lib/kobject.c | 29 +++++++++++++++++++++++++++++ 2 files changed, 39 insertions(+) diff --git a/include/linux/kobject.h b/include/linux/kobject.h index a6dd669cda9d..e694261de90f 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -126,6 +126,16 @@ struct kset_uevent_ops { struct kobj_uevent_env *env); }; +struct kobj_attribute { + struct attribute attr; + ssize_t (*show)(struct kobject *kobj, struct kobj_attribute *attr, + char *buf); + ssize_t (*store)(struct kobject *kobj, struct kobj_attribute *attr, + const char *buf, size_t count); +}; + +extern struct sysfs_ops kobj_sysfs_ops; + /** * struct kset - a set of kobjects of a specific type, belonging to a specific subsystem. * diff --git a/lib/kobject.c b/lib/kobject.c index 67c3d38d48f0..1c343fe4ba63 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -697,6 +697,35 @@ void kset_init(struct kset * k) spin_lock_init(&k->list_lock); } +/* default kobject attribute operations */ +static ssize_t kobj_attr_show(struct kobject *kobj, struct attribute *attr, + char *buf) +{ + struct kobj_attribute *kattr; + ssize_t ret = -EIO; + + kattr = container_of(attr, struct kobj_attribute, attr); + if (kattr->show) + ret = kattr->show(kobj, kattr, buf); + return ret; +} + +static ssize_t kobj_attr_store(struct kobject *kobj, struct attribute *attr, + const char *buf, size_t count) +{ + struct kobj_attribute *kattr; + ssize_t ret = -EIO; + + kattr = container_of(attr, struct kobj_attribute, attr); + if (kattr->store) + ret = kattr->store(kobj, kattr, buf, count); + return ret; +} + +struct sysfs_ops kobj_sysfs_ops = { + .show = kobj_attr_show, + .store = kobj_attr_store, +}; /** * kset_add - add a kset object to the hierarchy. -- cgit v1.2.3-59-g8ed1b From 386f275f5d097758f867bc99ddeaeb7a03b6b190 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Fri, 2 Nov 2007 13:47:53 +0100 Subject: Driver Core: switch all dynamic ksets to kobj_sysfs_ops Switch all dynamically created ksets, that export simple attributes, to kobj_attribute from subsys_attribute. Struct subsys_attribute will be removed. Signed-off-by: Kay Sievers Cc: Mike Halcrow Cc: Phillip Hellewell Signed-off-by: Greg Kroah-Hartman --- fs/ecryptfs/main.c | 10 ++++++---- kernel/ksysfs.c | 35 +++++++++++++++++++++-------------- kernel/power/disk.c | 18 ++++++++++++------ kernel/power/main.c | 12 ++++++++---- kernel/power/power.h | 2 +- lib/kobject.c | 10 ++++++---- 6 files changed, 54 insertions(+), 33 deletions(-) diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c index bdeac3877a84..6ded37b467ff 100644 --- a/fs/ecryptfs/main.c +++ b/fs/ecryptfs/main.c @@ -736,12 +736,13 @@ static int ecryptfs_init_kmem_caches(void) static struct kset *ecryptfs_kset; -static ssize_t version_show(struct kset *kset, char *buff) +static ssize_t version_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buff) { return snprintf(buff, PAGE_SIZE, "%d\n", ECRYPTFS_VERSIONING_MASK); } -static struct subsys_attribute version_attr = __ATTR_RO(version); +static struct kobj_attribute version_attr = __ATTR_RO(version); static struct ecryptfs_version_str_map_elem { u32 flag; @@ -755,7 +756,8 @@ static struct ecryptfs_version_str_map_elem { {ECRYPTFS_VERSIONING_MULTKEY, "multiple keys per file"} }; -static ssize_t version_str_show(struct kset *kset, char *buff) +static ssize_t version_str_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buff) { int i; int remaining = PAGE_SIZE; @@ -782,7 +784,7 @@ out: return total_written; } -static struct subsys_attribute version_attr_str = __ATTR_RO(version_str); +static struct kobj_attribute version_attr_str = __ATTR_RO(version_str); static struct attribute *attributes[] = { &version_attr.attr, diff --git a/kernel/ksysfs.c b/kernel/ksysfs.c index cf02d4ba9add..dd0f9e7f3414 100644 --- a/kernel/ksysfs.c +++ b/kernel/ksysfs.c @@ -17,30 +17,34 @@ #include #define KERNEL_ATTR_RO(_name) \ -static struct subsys_attribute _name##_attr = __ATTR_RO(_name) +static struct kobj_attribute _name##_attr = __ATTR_RO(_name) #define KERNEL_ATTR_RW(_name) \ -static struct subsys_attribute _name##_attr = \ +static struct kobj_attribute _name##_attr = \ __ATTR(_name, 0644, _name##_show, _name##_store) #if defined(CONFIG_HOTPLUG) && defined(CONFIG_NET) /* current uevent sequence number */ -static ssize_t uevent_seqnum_show(struct kset *kset, char *page) +static ssize_t uevent_seqnum_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) { - return sprintf(page, "%llu\n", (unsigned long long)uevent_seqnum); + return sprintf(buf, "%llu\n", (unsigned long long)uevent_seqnum); } KERNEL_ATTR_RO(uevent_seqnum); /* uevent helper program, used during early boo */ -static ssize_t uevent_helper_show(struct kset *kset, char *page) +static ssize_t uevent_helper_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) { - return sprintf(page, "%s\n", uevent_helper); + return sprintf(buf, "%s\n", uevent_helper); } -static ssize_t uevent_helper_store(struct kset *kset, const char *page, size_t count) +static ssize_t uevent_helper_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t count) { if (count+1 > UEVENT_HELPER_PATH_LEN) return -ENOENT; - memcpy(uevent_helper, page, count); + memcpy(uevent_helper, buf, count); uevent_helper[count] = '\0'; if (count && uevent_helper[count-1] == '\n') uevent_helper[count-1] = '\0'; @@ -50,21 +54,24 @@ KERNEL_ATTR_RW(uevent_helper); #endif #ifdef CONFIG_KEXEC -static ssize_t kexec_loaded_show(struct kset *kset, char *page) +static ssize_t kexec_loaded_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) { - return sprintf(page, "%d\n", !!kexec_image); + return sprintf(buf, "%d\n", !!kexec_image); } KERNEL_ATTR_RO(kexec_loaded); -static ssize_t kexec_crash_loaded_show(struct kset *kset, char *page) +static ssize_t kexec_crash_loaded_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) { - return sprintf(page, "%d\n", !!kexec_crash_image); + return sprintf(buf, "%d\n", !!kexec_crash_image); } KERNEL_ATTR_RO(kexec_crash_loaded); -static ssize_t vmcoreinfo_show(struct kset *kset, char *page) +static ssize_t vmcoreinfo_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) { - return sprintf(page, "%lx %x\n", + return sprintf(buf, "%lx %x\n", paddr_vmcoreinfo_note(), (unsigned int)vmcoreinfo_max_size); } diff --git a/kernel/power/disk.c b/kernel/power/disk.c index c3f0e61365dd..ef5aa2ca0ab0 100644 --- a/kernel/power/disk.c +++ b/kernel/power/disk.c @@ -567,7 +567,8 @@ static const char * const hibernation_modes[] = { * supports it (as determined by having hibernation_ops). */ -static ssize_t disk_show(struct kset *kset, char *buf) +static ssize_t disk_show(struct kobject *kobj, struct kobj_attribute *attr, + char *buf) { int i; char *start = buf; @@ -597,7 +598,8 @@ static ssize_t disk_show(struct kset *kset, char *buf) } -static ssize_t disk_store(struct kset *kset, const char *buf, size_t n) +static ssize_t disk_store(struct kobject *kobj, struct kobj_attribute *attr, + const char *buf, size_t n) { int error = 0; int i; @@ -642,13 +644,15 @@ static ssize_t disk_store(struct kset *kset, const char *buf, size_t n) power_attr(disk); -static ssize_t resume_show(struct kset *kset, char *buf) +static ssize_t resume_show(struct kobject *kobj, struct kobj_attribute *attr, + char *buf) { return sprintf(buf,"%d:%d\n", MAJOR(swsusp_resume_device), MINOR(swsusp_resume_device)); } -static ssize_t resume_store(struct kset *kset, const char *buf, size_t n) +static ssize_t resume_store(struct kobject *kobj, struct kobj_attribute *attr, + const char *buf, size_t n) { unsigned int maj, min; dev_t res; @@ -674,12 +678,14 @@ static ssize_t resume_store(struct kset *kset, const char *buf, size_t n) power_attr(resume); -static ssize_t image_size_show(struct kset *kset, char *buf) +static ssize_t image_size_show(struct kobject *kobj, struct kobj_attribute *attr, + char *buf) { return sprintf(buf, "%lu\n", image_size); } -static ssize_t image_size_store(struct kset *kset, const char *buf, size_t n) +static ssize_t image_size_store(struct kobject *kobj, struct kobj_attribute *attr, + const char *buf, size_t n) { unsigned long size; diff --git a/kernel/power/main.c b/kernel/power/main.c index dce2d76d66de..b8139493b856 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -289,7 +289,8 @@ struct kset *power_kset; * proper enumerated value, and initiates a suspend transition. */ -static ssize_t state_show(struct kset *kset, char *buf) +static ssize_t state_show(struct kobject *kobj, struct kobj_attribute *attr, + char *buf) { char *s = buf; #ifdef CONFIG_SUSPEND @@ -310,7 +311,8 @@ static ssize_t state_show(struct kset *kset, char *buf) return (s - buf); } -static ssize_t state_store(struct kset *kset, const char *buf, size_t n) +static ssize_t state_store(struct kobject *kobj, struct kobj_attribute *attr, + const char *buf, size_t n) { #ifdef CONFIG_SUSPEND suspend_state_t state = PM_SUSPEND_STANDBY; @@ -347,13 +349,15 @@ power_attr(state); #ifdef CONFIG_PM_TRACE int pm_trace_enabled; -static ssize_t pm_trace_show(struct kset *kset, char *buf) +static ssize_t pm_trace_show(struct kobject *kobj, struct kobj_attribute *attr, + char *buf) { return sprintf(buf, "%d\n", pm_trace_enabled); } static ssize_t -pm_trace_store(struct kset *kset, const char *buf, size_t n) +pm_trace_store(struct kobject *kobj, struct kobj_attribute *attr, + const char *buf, size_t n) { int val; diff --git a/kernel/power/power.h b/kernel/power/power.h index 1083e6b188ab..2093c3a9a994 100644 --- a/kernel/power/power.h +++ b/kernel/power/power.h @@ -54,7 +54,7 @@ extern int pfn_is_nosave(unsigned long); extern struct mutex pm_mutex; #define power_attr(_name) \ -static struct subsys_attribute _name##_attr = { \ +static struct kobj_attribute _name##_attr = { \ .attr = { \ .name = __stringify(_name), \ .mode = 0644, \ diff --git a/lib/kobject.c b/lib/kobject.c index 1c343fe4ba63..99f6354a5751 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -626,7 +626,8 @@ static void dynamic_kobj_release(struct kobject *kobj) } static struct kobj_type dynamic_kobj_ktype = { - .release = dynamic_kobj_release, + .release = dynamic_kobj_release, + .sysfs_ops = &kobj_sysfs_ops, }; /** @@ -836,7 +837,8 @@ static void kset_release(struct kobject *kobj) kfree(kset); } -static struct kobj_type kset_type = { +static struct kobj_type kset_ktype = { + .sysfs_ops = &kobj_sysfs_ops, .release = kset_release, }; @@ -869,11 +871,11 @@ static struct kset *kset_create(const char *name, kset->kobj.parent = parent_kobj; /* - * The kobject of this kset will have a type of kset_type and belong to + * The kobject of this kset will have a type of kset_ktype and belong to * no kset itself. That way we can properly free it when it is * finished being used. */ - kset->kobj.ktype = &kset_type; + kset->kobj.ktype = &kset_ktype; kset->kobj.kset = NULL; return kset; -- cgit v1.2.3-59-g8ed1b From eb41d9465cdafee45e0cb30f3b7338646221908e Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Fri, 2 Nov 2007 13:47:53 +0100 Subject: fix struct user_info export's sysfs interaction Clean up the use of ksets and kobjects. Kobjects are instances of objects (like struct user_info), ksets are collections of objects of a similar type (like the uids directory containing the user_info directories). So, use kobjects for the user_info directories, and a kset for the "uids" directory. On object cleanup, the final kobject_put() was missing. Cc: Dhaval Giani Cc: Srivatsa Vaddagiri Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/sched.h | 9 +---- kernel/ksysfs.c | 7 +--- kernel/user.c | 104 +++++++++++++++++++++++++------------------------- 3 files changed, 55 insertions(+), 65 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index cc14656f8682..d6eacda765ca 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -552,18 +552,13 @@ struct user_struct { #ifdef CONFIG_FAIR_USER_SCHED struct task_group *tg; #ifdef CONFIG_SYSFS - struct kset kset; - struct subsys_attribute user_attr; + struct kobject kobj; struct work_struct work; #endif #endif }; -#ifdef CONFIG_FAIR_USER_SCHED -extern int uids_kobject_init(void); -#else -static inline int uids_kobject_init(void) { return 0; } -#endif +extern int uids_sysfs_init(void); extern struct user_struct *find_user(uid_t); diff --git a/kernel/ksysfs.c b/kernel/ksysfs.c index dd0f9e7f3414..45e646585605 100644 --- a/kernel/ksysfs.c +++ b/kernel/ksysfs.c @@ -141,11 +141,8 @@ static int __init ksysfs_init(void) goto group_exit; } - /* - * Create "/sys/kernel/uids" directory and corresponding root user's - * directory under it. - */ - error = uids_kobject_init(); + /* create the /sys/kernel/uids/ directory */ + error = uids_sysfs_init(); if (error) goto notes_exit; diff --git a/kernel/user.c b/kernel/user.c index 80f1116b8fcd..5a106f3fdf05 100644 --- a/kernel/user.c +++ b/kernel/user.c @@ -115,7 +115,7 @@ static void sched_switch_user(struct task_struct *p) { } #if defined(CONFIG_FAIR_USER_SCHED) && defined(CONFIG_SYSFS) -static struct kobject uids_kobject; /* represents /sys/kernel/uids directory */ +static struct kset *uids_kset; /* represents the /sys/kernel/uids/ directory */ static DEFINE_MUTEX(uids_mutex); static inline void uids_mutex_lock(void) @@ -128,86 +128,84 @@ static inline void uids_mutex_unlock(void) mutex_unlock(&uids_mutex); } -/* return cpu shares held by the user */ -static ssize_t cpu_shares_show(struct kset *kset, char *buffer) +/* uid directory attributes */ +static ssize_t cpu_shares_show(struct kobject *kobj, + struct kobj_attribute *attr, + char *buf) { - struct user_struct *up = container_of(kset, struct user_struct, kset); + struct user_struct *up = container_of(kobj, struct user_struct, kobj); - return sprintf(buffer, "%lu\n", sched_group_shares(up->tg)); + return sprintf(buf, "%lu\n", sched_group_shares(up->tg)); } -/* modify cpu shares held by the user */ -static ssize_t cpu_shares_store(struct kset *kset, const char *buffer, - size_t size) +static ssize_t cpu_shares_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t size) { - struct user_struct *up = container_of(kset, struct user_struct, kset); + struct user_struct *up = container_of(kobj, struct user_struct, kobj); unsigned long shares; int rc; - sscanf(buffer, "%lu", &shares); + sscanf(buf, "%lu", &shares); rc = sched_group_set_shares(up->tg, shares); return (rc ? rc : size); } -static void user_attr_init(struct subsys_attribute *sa, char *name, int mode) +static struct kobj_attribute cpu_share_attr = + __ATTR(cpu_share, 0644, cpu_shares_show, cpu_shares_store); + +/* default attributes per uid directory */ +static struct attribute *uids_attributes[] = { + &cpu_share_attr.attr, + NULL +}; + +/* the lifetime of user_struct is not managed by the core (now) */ +static void uids_release(struct kobject *kobj) { - sa->attr.name = name; - sa->attr.mode = mode; - sa->show = cpu_shares_show; - sa->store = cpu_shares_store; + return; } -/* Create "/sys/kernel/uids/" directory and - * "/sys/kernel/uids//cpu_share" file for this user. - */ -static int user_kobject_create(struct user_struct *up) +static struct kobj_type uids_ktype = { + .sysfs_ops = &kobj_sysfs_ops, + .default_attrs = uids_attributes, + .release = uids_release, +}; + +/* create /sys/kernel/uids//cpu_share file for this user */ +static int uids_user_create(struct user_struct *up) { - struct kset *kset = &up->kset; - struct kobject *kobj = &kset->kobj; + struct kobject *kobj = &up->kobj; int error; - memset(kset, 0, sizeof(struct kset)); - kobj->parent = &uids_kobject; /* create under /sys/kernel/uids dir */ - kobject_set_name(kobj, "%d", up->uid); - kset_init(kset); - user_attr_init(&up->user_attr, "cpu_share", 0644); - + memset(kobj, 0, sizeof(struct kobject)); + kobj->ktype = &uids_ktype; + kobj->kset = uids_kset; + kobject_init(kobj); + kobject_set_name(&up->kobj, "%d", up->uid); error = kobject_add(kobj); if (error) goto done; - error = sysfs_create_file(kobj, &up->user_attr.attr); - if (error) - kobject_del(kobj); - kobject_uevent(kobj, KOBJ_ADD); - done: return error; } -/* create these in sysfs filesystem: +/* create these entries in sysfs: * "/sys/kernel/uids" directory * "/sys/kernel/uids/0" directory (for root user) * "/sys/kernel/uids/0/cpu_share" file (for root user) */ -int __init uids_kobject_init(void) +int __init uids_sysfs_init(void) { - int error; + uids_kset = kset_create_and_add("uids", NULL, &kernel_kset->kobj); + if (!uids_kset) + return -ENOMEM; - /* create under /sys/kernel dir */ - uids_kobject.parent = &kernel_kset->kobj; - uids_kobject.kset = kernel_kset; - kobject_set_name(&uids_kobject, "uids"); - kobject_init(&uids_kobject); - - error = kobject_add(&uids_kobject); - if (!error) - error = user_kobject_create(&root_user); - - return error; + return uids_user_create(&root_user); } /* work function to remove sysfs directory for a user and free up @@ -216,7 +214,6 @@ int __init uids_kobject_init(void) static void remove_user_sysfs_dir(struct work_struct *w) { struct user_struct *up = container_of(w, struct user_struct, work); - struct kobject *kobj = &up->kset.kobj; unsigned long flags; int remove_user = 0; @@ -238,9 +235,9 @@ static void remove_user_sysfs_dir(struct work_struct *w) if (!remove_user) goto done; - sysfs_remove_file(kobj, &up->user_attr.attr); - kobject_uevent(kobj, KOBJ_REMOVE); - kobject_del(kobj); + kobject_uevent(&up->kobj, KOBJ_REMOVE); + kobject_del(&up->kobj); + kobject_put(&up->kobj); sched_destroy_user(up); key_put(up->uid_keyring); @@ -267,7 +264,8 @@ static inline void free_user(struct user_struct *up, unsigned long flags) #else /* CONFIG_FAIR_USER_SCHED && CONFIG_SYSFS */ -static inline int user_kobject_create(struct user_struct *up) { return 0; } +int uids_sysfs_init(void) { return 0; } +static inline int uids_user_create(struct user_struct *up) { return 0; } static inline void uids_mutex_lock(void) { } static inline void uids_mutex_unlock(void) { } @@ -324,7 +322,7 @@ struct user_struct * alloc_uid(struct user_namespace *ns, uid_t uid) struct hlist_head *hashent = uidhashentry(ns, uid); struct user_struct *up; - /* Make uid_hash_find() + user_kobject_create() + uid_hash_insert() + /* Make uid_hash_find() + uids_user_create() + uid_hash_insert() * atomic. */ uids_mutex_lock(); @@ -370,7 +368,7 @@ struct user_struct * alloc_uid(struct user_namespace *ns, uid_t uid) return NULL; } - if (user_kobject_create(new)) { + if (uids_user_create(new)) { sched_destroy_user(new); key_put(new->uid_keyring); key_put(new->session_keyring); -- cgit v1.2.3-59-g8ed1b From af6370ea9268443351d6e931c702dc8162a1c8a1 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 2 Nov 2007 13:20:40 -0700 Subject: ecryptfs: remove version_str file from sysfs This file violates the one-value-per-file sysfs rule. If you all want it added back, please do something like a per-feature file to show what is present and what isn't. Cc: Kay Sievers Cc: Mike Halcrow Cc: Phillip Hellewell Signed-off-by: Greg Kroah-Hartman --- fs/ecryptfs/main.c | 43 ------------------------------------------- 1 file changed, 43 deletions(-) diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c index 6ded37b467ff..d984eac9a7f5 100644 --- a/fs/ecryptfs/main.c +++ b/fs/ecryptfs/main.c @@ -744,51 +744,8 @@ static ssize_t version_show(struct kobject *kobj, static struct kobj_attribute version_attr = __ATTR_RO(version); -static struct ecryptfs_version_str_map_elem { - u32 flag; - char *str; -} ecryptfs_version_str_map[] = { - {ECRYPTFS_VERSIONING_PASSPHRASE, "passphrase"}, - {ECRYPTFS_VERSIONING_PUBKEY, "pubkey"}, - {ECRYPTFS_VERSIONING_PLAINTEXT_PASSTHROUGH, "plaintext passthrough"}, - {ECRYPTFS_VERSIONING_POLICY, "policy"}, - {ECRYPTFS_VERSIONING_XATTR, "metadata in extended attribute"}, - {ECRYPTFS_VERSIONING_MULTKEY, "multiple keys per file"} -}; - -static ssize_t version_str_show(struct kobject *kobj, - struct kobj_attribute *attr, char *buff) -{ - int i; - int remaining = PAGE_SIZE; - int total_written = 0; - - buff[0] = '\0'; - for (i = 0; i < ARRAY_SIZE(ecryptfs_version_str_map); i++) { - int entry_size; - - if (!(ECRYPTFS_VERSIONING_MASK - & ecryptfs_version_str_map[i].flag)) - continue; - entry_size = strlen(ecryptfs_version_str_map[i].str); - if ((entry_size + 2) > remaining) - goto out; - memcpy(buff, ecryptfs_version_str_map[i].str, entry_size); - buff[entry_size++] = '\n'; - buff[entry_size] = '\0'; - buff += entry_size; - total_written += entry_size; - remaining -= entry_size; - } -out: - return total_written; -} - -static struct kobj_attribute version_attr_str = __ATTR_RO(version_str); - static struct attribute *attributes[] = { &version_attr.attr, - &version_attr_str.attr, NULL, }; -- cgit v1.2.3-59-g8ed1b From 97fa5bb74c26fda93757b94ed248f5dabd4ad3d7 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 7 Nov 2007 13:56:19 -0800 Subject: efivars: make new_var and del_var binary sysfs files These files should not be "normal" sysfs files as they really are binary ones. This patch makes them binary files and saves code in doing so. Cc: Kay Sievers Tested-by: Matt Domsch Cc: Matt Tolentino Signed-off-by: Greg Kroah-Hartman --- drivers/firmware/efivars.c | 51 +++++++++++++++++++++------------------------- 1 file changed, 23 insertions(+), 28 deletions(-) diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c index 06ecdb9f6013..82183c28a12a 100644 --- a/drivers/firmware/efivars.c +++ b/drivers/firmware/efivars.c @@ -143,13 +143,6 @@ struct efivar_attribute efivar_attr_##_name = { \ .store = _store, \ }; -#define VAR_SUBSYS_ATTR(_name, _mode, _show, _store) \ -struct subsys_attribute var_subsys_attr_##_name = { \ - .attr = {.name = __stringify(_name), .mode = _mode}, \ - .show = _show, \ - .store = _store, \ -}; - #define to_efivar_attr(_attr) container_of(_attr, struct efivar_attribute, attr) #define to_efivar_entry(obj) container_of(obj, struct efivar_entry, kobj) @@ -408,12 +401,6 @@ static struct kobj_type efivar_ktype = { .default_attrs = def_attrs, }; -static ssize_t -dummy(struct kset *kset, char *buf) -{ - return -ENODEV; -} - static inline void efivar_unregister(struct efivar_entry *var) { @@ -421,8 +408,9 @@ efivar_unregister(struct efivar_entry *var) } -static ssize_t -efivar_create(struct kset *kset, const char *buf, size_t count) +static ssize_t efivar_create(struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t pos, size_t count) { struct efi_variable *new_var = (struct efi_variable *)buf; struct efivar_entry *search_efivar, *n; @@ -479,8 +467,9 @@ efivar_create(struct kset *kset, const char *buf, size_t count) return count; } -static ssize_t -efivar_delete(struct kset *kset, const char *buf, size_t count) +static ssize_t efivar_delete(struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t pos, size_t count) { struct efi_variable *del_var = (struct efi_variable *)buf; struct efivar_entry *search_efivar, *n; @@ -537,13 +526,14 @@ efivar_delete(struct kset *kset, const char *buf, size_t count) return count; } -static VAR_SUBSYS_ATTR(new_var, 0200, dummy, efivar_create); -static VAR_SUBSYS_ATTR(del_var, 0200, dummy, efivar_delete); +static struct bin_attribute var_subsys_attr_new_var = { + .attr = {.name = "new_var", .mode = 0200}, + .write = efivar_create, +}; -static struct subsys_attribute *var_subsys_attrs[] = { - &var_subsys_attr_new_var, - &var_subsys_attr_del_var, - NULL, +static struct bin_attribute var_subsys_attr_del_var = { + .attr = {.name = "del_var", .mode = 0200}, + .write = efivar_delete, }; /* @@ -728,11 +718,16 @@ efivars_init(void) * Now add attributes to allow creation of new vars * and deletion of existing ones... */ - - for (i = 0; (attr = var_subsys_attrs[i]) && !error; i++) { - if (attr->show && attr->store) - error = subsys_create_file(&vars_subsys, attr); - } + error = sysfs_create_bin_file(&vars_subsys.kobj, + &var_subsys_attr_new_var); + if (error) + printk(KERN_ERR "efivars: unable to create new_var sysfs file" + " due to error %d\n", error); + error = sysfs_create_bin_file(&vars_subsys.kobj, + &var_subsys_attr_del_var); + if (error) + printk(KERN_ERR "efivars: unable to create del_var sysfs file" + " due to error %d\n", error); /* Don't forget the systab entry */ -- cgit v1.2.3-59-g8ed1b From 334c6307543a2b8af730a422f466d5f9442b606a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 2 Nov 2007 13:20:40 -0700 Subject: kobject: convert efivars to kobj_attr interface This cleans up a lot of code and gets rid of a unneeded macro, and gets us one step closer to deleting the deprecated subsys_attr code. Cc: Kay Sievers Cc: Matt Domsch Cc: Matt Tolentino Signed-off-by: Greg Kroah-Hartman --- drivers/firmware/efivars.c | 35 ++++++++++++++--------------------- 1 file changed, 14 insertions(+), 21 deletions(-) diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c index 82183c28a12a..ebc38534b02d 100644 --- a/drivers/firmware/efivars.c +++ b/drivers/firmware/efivars.c @@ -129,13 +129,6 @@ struct efivar_attribute { }; -#define EFI_ATTR(_name, _mode, _show, _store) \ -struct subsys_attribute efi_attr_##_name = { \ - .attr = {.name = __stringify(_name), .mode = _mode}, \ - .show = _show, \ - .store = _store, \ -}; - #define EFIVAR_ATTR(_name, _mode, _show, _store) \ struct efivar_attribute efivar_attr_##_name = { \ .attr = {.name = __stringify(_name), .mode = _mode}, \ @@ -540,12 +533,12 @@ static struct bin_attribute var_subsys_attr_del_var = { * Let's not leave out systab information that snuck into * the efivars driver */ -static ssize_t -systab_read(struct kset *kset, char *buf) +static ssize_t systab_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) { char *str = buf; - if (!kset || !buf) + if (!kobj || !buf) return -EINVAL; if (efi.mps != EFI_INVALID_TABLE_ADDR) @@ -566,13 +559,19 @@ systab_read(struct kset *kset, char *buf) return str - buf; } -static EFI_ATTR(systab, 0400, systab_read, NULL); +static struct kobj_attribute efi_attr_systab = + __ATTR(systab, 0400, systab_show, NULL); -static struct subsys_attribute *efi_subsys_attrs[] = { - &efi_attr_systab, +static struct attribute *efi_subsys_attrs[] = { + &efi_attr_systab.attr, NULL, /* maybe more in the future? */ }; +static struct attribute_group efi_subsys_attr_group = { + .attrs = efi_subsys_attrs, +}; + + static decl_subsys(vars, NULL); static decl_subsys(efi, NULL); @@ -651,9 +650,8 @@ efivars_init(void) efi_status_t status = EFI_NOT_FOUND; efi_guid_t vendor_guid; efi_char16_t *variable_name; - struct subsys_attribute *attr; unsigned long variable_name_size = 1024; - int i, error = 0; + int error = 0; if (!efi_enabled) return -ENODEV; @@ -730,12 +728,7 @@ efivars_init(void) " due to error %d\n", error); /* Don't forget the systab entry */ - - for (i = 0; (attr = efi_subsys_attrs[i]) && !error; i++) { - if (attr->show) - error = subsys_create_file(&efi_subsys, attr); - } - + error = sysfs_create_group(&efi_subsys.kobj, &efi_subsys_attr_group); if (error) printk(KERN_ERR "efivars: Sysfs attribute export failed with error %d.\n", error); else -- cgit v1.2.3-59-g8ed1b From 9e5f7f9abe18a4f134585a2de016974cbda80539 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 2 Nov 2007 13:20:40 -0700 Subject: firmware: export firmware_kset so that people can use that instead of the braindead firmware_register interface Needed for future firmware subsystem cleanups. In the end, the firmware_register/unregister functions will be deleted entirely, but we need this symbol so that subsystems can migrate over. Cc: Kay Sievers Cc: Matt Domsch Cc: Matt Tolentino Signed-off-by: Greg Kroah-Hartman --- drivers/base/firmware.c | 3 ++- include/linux/kobject.h | 2 ++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/base/firmware.c b/drivers/base/firmware.c index 6a4e494042f6..c7f635b11dfd 100644 --- a/drivers/base/firmware.c +++ b/drivers/base/firmware.c @@ -15,7 +15,8 @@ #include "base.h" -static struct kset *firmware_kset; +struct kset *firmware_kset; +EXPORT_SYMBOL_GPL(firmware_kset); int firmware_register(struct kset *s) { diff --git a/include/linux/kobject.h b/include/linux/kobject.h index e694261de90f..29dc444e3361 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -210,6 +210,8 @@ extern struct kset *kernel_kset; extern struct kobject *hypervisor_kobj; /* The global /sys/power/ kset for people to chain off of */ extern struct kset *power_kset; +/* The global /sys/firmware/ kset for people to chain off of */ +extern struct kset *firmware_kset; extern int __must_check subsystem_register(struct kset *); extern void subsystem_unregister(struct kset *); -- cgit v1.2.3-59-g8ed1b From 89a07e34b16d9dcdf0a9ada3ca0c9a506b490c8f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 2 Nov 2007 13:20:40 -0700 Subject: kset: convert efivars to use kset_create for the efi subsystem. Dynamically create the kset instead of declaring it statically. Cc: Kay Sievers Cc: Matt Domsch Cc: Matt Tolentino Signed-off-by: Greg Kroah-Hartman --- drivers/firmware/efivars.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c index ebc38534b02d..018ca1cd82bc 100644 --- a/drivers/firmware/efivars.c +++ b/drivers/firmware/efivars.c @@ -573,7 +573,7 @@ static struct attribute_group efi_subsys_attr_group = { static decl_subsys(vars, NULL); -static decl_subsys(efi, NULL); +static struct kset *efi_kset; /* * efivar_create_sysfs_entry() @@ -668,15 +668,14 @@ efivars_init(void) /* * For now we'll register the efi subsys within this driver */ - - error = firmware_register(&efi_subsys); - - if (error) { - printk(KERN_ERR "efivars: Firmware registration failed with error %d.\n", error); + efi_kset = kset_create_and_add("efi", NULL, &firmware_kset->kobj); + if (!efi_kset) { + printk(KERN_ERR "efivars: Firmware registration failed.\n"); + error = -ENOMEM; goto out_free; } - vars_subsys.kobj.kset = &efi_subsys; + vars_subsys.kobj.kset = efi_kset; error = subsystem_register(&vars_subsys); @@ -728,7 +727,7 @@ efivars_init(void) " due to error %d\n", error); /* Don't forget the systab entry */ - error = sysfs_create_group(&efi_subsys.kobj, &efi_subsys_attr_group); + error = sysfs_create_group(&efi_kset->kobj, &efi_subsys_attr_group); if (error) printk(KERN_ERR "efivars: Sysfs attribute export failed with error %d.\n", error); else @@ -737,7 +736,7 @@ efivars_init(void) subsystem_unregister(&vars_subsys); out_firmware_unregister: - firmware_unregister(&efi_subsys); + kset_unregister(efi_kset); out_free: kfree(variable_name); @@ -758,7 +757,7 @@ efivars_exit(void) } subsystem_unregister(&vars_subsys); - firmware_unregister(&efi_subsys); + kset_unregister(efi_kset); } module_init(efivars_init); -- cgit v1.2.3-59-g8ed1b From 66ac831e03879c3c7dae76f793e6094e407081d2 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 2 Nov 2007 13:20:40 -0700 Subject: kset: convert efivars to use kset_create for the vars sub-subsystem. Dynamically create the kset instead of declaring it statically. Cc: Kay Sievers Cc: Matt Domsch Cc: Matt Tolentino Signed-off-by: Greg Kroah-Hartman --- drivers/firmware/efivars.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c index 018ca1cd82bc..e17cd8133548 100644 --- a/drivers/firmware/efivars.c +++ b/drivers/firmware/efivars.c @@ -572,7 +572,7 @@ static struct attribute_group efi_subsys_attr_group = { }; -static decl_subsys(vars, NULL); +static struct kset *vars_kset; static struct kset *efi_kset; /* @@ -618,7 +618,7 @@ efivar_create_sysfs_entry(unsigned long variable_name_size, efi_guid_unparse(vendor_guid, short_name + strlen(short_name)); kobject_set_name(&new_efivar->kobj, "%s", short_name); - new_efivar->kobj.kset = &vars_subsys; + new_efivar->kobj.kset = vars_kset; new_efivar->kobj.ktype = &efivar_ktype; i = kobject_register(&new_efivar->kobj); if (i) { @@ -675,12 +675,10 @@ efivars_init(void) goto out_free; } - vars_subsys.kobj.kset = efi_kset; - - error = subsystem_register(&vars_subsys); - - if (error) { - printk(KERN_ERR "efivars: Subsystem registration failed with error %d.\n", error); + vars_kset = kset_create_and_add("vars", NULL, &efi_kset->kobj); + if (!vars_kset) { + printk(KERN_ERR "efivars: Subsystem registration failed.\n"); + error = -ENOMEM; goto out_firmware_unregister; } @@ -715,12 +713,12 @@ efivars_init(void) * Now add attributes to allow creation of new vars * and deletion of existing ones... */ - error = sysfs_create_bin_file(&vars_subsys.kobj, + error = sysfs_create_bin_file(&vars_kset->kobj, &var_subsys_attr_new_var); if (error) printk(KERN_ERR "efivars: unable to create new_var sysfs file" " due to error %d\n", error); - error = sysfs_create_bin_file(&vars_subsys.kobj, + error = sysfs_create_bin_file(&vars_kset->kobj, &var_subsys_attr_del_var); if (error) printk(KERN_ERR "efivars: unable to create del_var sysfs file" @@ -733,7 +731,7 @@ efivars_init(void) else goto out_free; - subsystem_unregister(&vars_subsys); + kset_unregister(vars_kset); out_firmware_unregister: kset_unregister(efi_kset); @@ -756,7 +754,7 @@ efivars_exit(void) efivar_unregister(entry); } - subsystem_unregister(&vars_subsys); + kset_unregister(vars_kset); kset_unregister(efi_kset); } -- cgit v1.2.3-59-g8ed1b From 851324c6ffdf94976b4a925d0684a4faa993b9ca Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 2 Nov 2007 13:20:40 -0700 Subject: kobject: convert arm/mach-omap1/pm.c to kobj_attr interface This makes the code a bit simpler and and gets us one step closer to deleting the deprecated subsys_attr code. Cc: Kay Sievers Cc: Cliff Brake Cc: Dirk Behme Signed-off-by: Greg Kroah-Hartman --- arch/arm/mach-omap1/pm.c | 22 ++++++++-------------- 1 file changed, 8 insertions(+), 14 deletions(-) diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 402113c72981..63edafb59490 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -69,14 +69,14 @@ static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; static unsigned short enable_dyn_sleep = 1; -static ssize_t omap_pm_sleep_while_idle_show(struct kset *kset, char *buf) +static ssize_t idle_show(struct kobject *kobj, struct kobj_attribute *attr, + char *buf) { return sprintf(buf, "%hu\n", enable_dyn_sleep); } -static ssize_t omap_pm_sleep_while_idle_store(struct kset *kset, - const char * buf, - size_t n) +static ssize_t idle_store(struct kobject *kobj, struct kobj_attribute *attr, + const char * buf, size_t n) { unsigned short value; if (sscanf(buf, "%hu", &value) != 1 || @@ -88,14 +88,8 @@ static ssize_t omap_pm_sleep_while_idle_store(struct kset *kset, return n; } -static struct subsys_attribute sleep_while_idle_attr = { - .attr = { - .name = __stringify(sleep_while_idle), - .mode = 0644, - }, - .show = omap_pm_sleep_while_idle_show, - .store = omap_pm_sleep_while_idle_store, -}; +static struct kobj_attribute sleep_while_idle_attr = + __ATTR(sleep_while_idle, 0644, idle_show, idle_store); static void (*omap_sram_idle)(void) = NULL; static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL; @@ -725,9 +719,9 @@ static int __init omap_pm_init(void) omap_pm_init_proc(); #endif - error = subsys_create_file(power_kset, &sleep_while_idle_attr); + error = sysfs_create_file(&power_kset->kobj, &sleep_while_idle_attr); if (error) - printk(KERN_ERR "subsys_create_file failed: %d\n", error); + printk(KERN_ERR "sysfs_create_file failed: %d\n", error); if (cpu_is_omap16xx()) { /* configure LOW_PWR pin */ -- cgit v1.2.3-59-g8ed1b From 79393fc46ede43451a500a132e5de9856f5a4c83 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 2 Nov 2007 13:20:40 -0700 Subject: kobject: convert pseries/power.c to kobj_attr interface This makes the code a bit simpler and and gets us one step closer to deleting the deprecated subsys_attr code. Cc: Kay Sievers Cc: Manish Ahuja Signed-off-by: Greg Kroah-Hartman --- arch/powerpc/platforms/pseries/power.c | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-) diff --git a/arch/powerpc/platforms/pseries/power.c b/arch/powerpc/platforms/pseries/power.c index c36febe7ce7d..90706cf840fd 100644 --- a/arch/powerpc/platforms/pseries/power.c +++ b/arch/powerpc/platforms/pseries/power.c @@ -28,13 +28,15 @@ unsigned long rtas_poweron_auto; /* default and normal state is 0 */ -static ssize_t auto_poweron_show(struct kset *kset, char *buf) +static ssize_t auto_poweron_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) { return sprintf(buf, "%lu\n", rtas_poweron_auto); } -static ssize_t -auto_poweron_store(struct kset *kset, const char *buf, size_t n) +static ssize_t auto_poweron_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t n) { int ret; unsigned long ups_restart; @@ -47,14 +49,8 @@ auto_poweron_store(struct kset *kset, const char *buf, size_t n) return -EINVAL; } -static struct subsys_attribute auto_poweron_attr = { - .attr = { - .name = __stringify(auto_poweron), - .mode = 0644, - }, - .show = auto_poweron_show, - .store = auto_poweron_store, -}; +static struct kobj_attribute auto_poweron_attr = + __ATTR(auto_poweron, 0644, auto_poweron_show, auto_poweron_store); #ifndef CONFIG_PM struct kset *power_kset; @@ -79,7 +75,7 @@ core_initcall(pm_init); #else static int __init apo_pm_init(void) { - return (subsys_create_file(power_kset, &auto_poweron_attr)); + return (sysfs_create_file(&power_kset->kobj, &auto_poweron_attr)); } __initcall(apo_pm_init); #endif -- cgit v1.2.3-59-g8ed1b From 9b949165bd4a86c536cb92a9ce4367effbde9079 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 2 Nov 2007 17:17:00 -0400 Subject: kobject: convert s390 ipl.c to kobj_attr interface This makes the code a bit simpler and and gets us one step closer to deleting the deprecated subsys_attr code. NOTE, this needs the next patch in the series in order to work properly. This will build, but the sysfs files will not properly operate. Thanks to Cornelia for the build fix on this patch. Cc: Kay Sievers Cc: Michael Holzheu Cc: Heiko Carstens Cc: Volker Sameske Cc: Cornelia Huck Signed-off-by: Greg Kroah-Hartman --- arch/s390/kernel/ipl.c | 80 ++++++++++++++++++++++++++++++-------------------- 1 file changed, 48 insertions(+), 32 deletions(-) diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index cae793af5423..50be9d063d68 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -162,22 +162,25 @@ EXPORT_SYMBOL_GPL(diag308); /* SYSFS */ #define DEFINE_IPL_ATTR_RO(_prefix, _name, _format, _value) \ -static ssize_t sys_##_prefix##_##_name##_show(struct kset *kset, \ +static ssize_t sys_##_prefix##_##_name##_show(struct kobject *kobj, \ + struct kobj_attribute *attr, \ char *page) \ { \ return sprintf(page, _format, _value); \ } \ -static struct subsys_attribute sys_##_prefix##_##_name##_attr = \ +static struct kobj_attribute sys_##_prefix##_##_name##_attr = \ __ATTR(_name, S_IRUGO, sys_##_prefix##_##_name##_show, NULL); #define DEFINE_IPL_ATTR_RW(_prefix, _name, _fmt_out, _fmt_in, _value) \ -static ssize_t sys_##_prefix##_##_name##_show(struct kset *kset, \ +static ssize_t sys_##_prefix##_##_name##_show(struct kobject *kobj, \ + struct kobj_attribute *attr, \ char *page) \ { \ return sprintf(page, _fmt_out, \ (unsigned long long) _value); \ } \ -static ssize_t sys_##_prefix##_##_name##_store(struct kset *kset, \ +static ssize_t sys_##_prefix##_##_name##_store(struct kobject *kobj, \ + struct kobj_attribute *attr, \ const char *buf, size_t len) \ { \ unsigned long long value; \ @@ -186,25 +189,27 @@ static ssize_t sys_##_prefix##_##_name##_store(struct kset *kset, \ _value = value; \ return len; \ } \ -static struct subsys_attribute sys_##_prefix##_##_name##_attr = \ +static struct kobj_attribute sys_##_prefix##_##_name##_attr = \ __ATTR(_name,(S_IRUGO | S_IWUSR), \ sys_##_prefix##_##_name##_show, \ sys_##_prefix##_##_name##_store); #define DEFINE_IPL_ATTR_STR_RW(_prefix, _name, _fmt_out, _fmt_in, _value)\ -static ssize_t sys_##_prefix##_##_name##_show(struct kset *kset, \ +static ssize_t sys_##_prefix##_##_name##_show(struct kobject *kobj, \ + struct kobj_attribute *attr, \ char *page) \ { \ return sprintf(page, _fmt_out, _value); \ } \ -static ssize_t sys_##_prefix##_##_name##_store(struct kset *kset, \ +static ssize_t sys_##_prefix##_##_name##_store(struct kobject *kobj, \ + struct kobj_attribute *attr, \ const char *buf, size_t len) \ { \ if (sscanf(buf, _fmt_in, _value) != 1) \ return -EINVAL; \ return len; \ } \ -static struct subsys_attribute sys_##_prefix##_##_name##_attr = \ +static struct kobj_attribute sys_##_prefix##_##_name##_attr = \ __ATTR(_name,(S_IRUGO | S_IWUSR), \ sys_##_prefix##_##_name##_show, \ sys_##_prefix##_##_name##_store); @@ -270,14 +275,16 @@ void __init setup_ipl_info(void) struct ipl_info ipl_info; EXPORT_SYMBOL_GPL(ipl_info); -static ssize_t ipl_type_show(struct kset *kset, char *page) +static ssize_t ipl_type_show(struct kobject *kobj, struct kobj_attribute *attr, + char *page) { return sprintf(page, "%s\n", ipl_type_str(ipl_info.type)); } -static struct subsys_attribute sys_ipl_type_attr = __ATTR_RO(ipl_type); +static struct kobj_attribute sys_ipl_type_attr = __ATTR_RO(ipl_type); -static ssize_t sys_ipl_device_show(struct kset *kset, char *page) +static ssize_t sys_ipl_device_show(struct kobject *kobj, + struct kobj_attribute *attr, char *page) { struct ipl_parameter_block *ipl = IPL_PARMBLOCK_START; @@ -292,7 +299,7 @@ static ssize_t sys_ipl_device_show(struct kset *kset, char *page) } } -static struct subsys_attribute sys_ipl_device_attr = +static struct kobj_attribute sys_ipl_device_attr = __ATTR(device, S_IRUGO, sys_ipl_device_show, NULL); static ssize_t ipl_parameter_read(struct kobject *kobj, struct bin_attribute *attr, @@ -367,7 +374,8 @@ static struct attribute_group ipl_fcp_attr_group = { /* CCW ipl device attributes */ -static ssize_t ipl_ccw_loadparm_show(struct kset *kset, char *page) +static ssize_t ipl_ccw_loadparm_show(struct kobject *kobj, + struct kobj_attribute *attr, char *page) { char loadparm[LOADPARM_LEN + 1] = {}; @@ -379,7 +387,7 @@ static ssize_t ipl_ccw_loadparm_show(struct kset *kset, char *page) return sprintf(page, "%s\n", loadparm); } -static struct subsys_attribute sys_ipl_ccw_loadparm_attr = +static struct kobj_attribute sys_ipl_ccw_loadparm_attr = __ATTR(loadparm, 0444, ipl_ccw_loadparm_show, NULL); static struct attribute *ipl_ccw_attrs[] = { @@ -465,7 +473,8 @@ static void reipl_get_ascii_loadparm(char *loadparm) strstrip(loadparm); } -static ssize_t reipl_ccw_loadparm_show(struct kset *kset, char *page) +static ssize_t reipl_ccw_loadparm_show(struct kobject *kobj, + struct kobj_attribute *attr, char *page) { char buf[LOADPARM_LEN + 1]; @@ -473,7 +482,8 @@ static ssize_t reipl_ccw_loadparm_show(struct kset *kset, char *page) return sprintf(page, "%s\n", buf); } -static ssize_t reipl_ccw_loadparm_store(struct kset *kset, +static ssize_t reipl_ccw_loadparm_store(struct kobject *kobj, + struct kobj_attribute *attr, const char *buf, size_t len) { int i, lp_len; @@ -500,7 +510,7 @@ static ssize_t reipl_ccw_loadparm_store(struct kset *kset, return len; } -static struct subsys_attribute sys_reipl_ccw_loadparm_attr = +static struct kobj_attribute sys_reipl_ccw_loadparm_attr = __ATTR(loadparm, 0644, reipl_ccw_loadparm_show, reipl_ccw_loadparm_store); @@ -568,13 +578,15 @@ static int reipl_set_type(enum ipl_type type) return 0; } -static ssize_t reipl_type_show(struct kset *kset, char *page) +static ssize_t reipl_type_show(struct kobject *kobj, + struct kobj_attribute *attr, char *page) { return sprintf(page, "%s\n", ipl_type_str(reipl_type)); } -static ssize_t reipl_type_store(struct kset *kset, const char *buf, - size_t len) +static ssize_t reipl_type_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t len) { int rc = -EINVAL; @@ -587,7 +599,7 @@ static ssize_t reipl_type_store(struct kset *kset, const char *buf, return (rc != 0) ? rc : len; } -static struct subsys_attribute reipl_type_attr = +static struct kobj_attribute reipl_type_attr = __ATTR(reipl_type, 0644, reipl_type_show, reipl_type_store); static decl_subsys(reipl, NULL); @@ -663,13 +675,15 @@ static int dump_set_type(enum dump_type type) return 0; } -static ssize_t dump_type_show(struct kset *kset, char *page) +static ssize_t dump_type_show(struct kobject *kobj, + struct kobj_attribute *attr, char *page) { return sprintf(page, "%s\n", dump_type_str(dump_type)); } -static ssize_t dump_type_store(struct kset *kset, const char *buf, - size_t len) +static ssize_t dump_type_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t len) { int rc = -EINVAL; @@ -682,7 +696,7 @@ static ssize_t dump_type_store(struct kset *kset, const char *buf, return (rc != 0) ? rc : len; } -static struct subsys_attribute dump_type_attr = +static struct kobj_attribute dump_type_attr = __ATTR(dump_type, 0644, dump_type_show, dump_type_store); static decl_subsys(dump, NULL); @@ -695,13 +709,15 @@ static decl_subsys(shutdown_actions, NULL); /* on panic */ -static ssize_t on_panic_show(struct kset *kset, char *page) +static ssize_t on_panic_show(struct kobject *kobj, + struct kobj_attribute *attr, char *page) { return sprintf(page, "%s\n", shutdown_action_str(on_panic_action)); } -static ssize_t on_panic_store(struct kset *kset, const char *buf, - size_t len) +static ssize_t on_panic_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t len) { if (strncmp(buf, SHUTDOWN_REIPL_STR, strlen(SHUTDOWN_REIPL_STR)) == 0) on_panic_action = SHUTDOWN_REIPL; @@ -717,7 +733,7 @@ static ssize_t on_panic_store(struct kset *kset, const char *buf, return len; } -static struct subsys_attribute on_panic_attr = +static struct kobj_attribute on_panic_attr = __ATTR(on_panic, 0644, on_panic_show, on_panic_store); void do_reipl(void) @@ -961,7 +977,7 @@ static int __init reipl_init(void) rc = firmware_register(&reipl_subsys); if (rc) return rc; - rc = subsys_create_file(&reipl_subsys, &reipl_type_attr); + rc = sysfs_create_file(&reipl_subsys.kobj, &reipl_type_attr.attr); if (rc) { firmware_unregister(&reipl_subsys); return rc; @@ -1050,7 +1066,7 @@ static int __init dump_init(void) rc = firmware_register(&dump_subsys); if (rc) return rc; - rc = subsys_create_file(&dump_subsys, &dump_type_attr); + rc = sysfs_create_file(&dump_subsys.kobj, &dump_type_attr.attr); if (rc) { firmware_unregister(&dump_subsys); return rc; @@ -1072,7 +1088,7 @@ static int __init shutdown_actions_init(void) rc = firmware_register(&shutdown_actions_subsys); if (rc) return rc; - rc = subsys_create_file(&shutdown_actions_subsys, &on_panic_attr); + rc = sysfs_create_file(&shutdown_actions_subsys.kobj, &on_panic_attr.attr); if (rc) { firmware_unregister(&shutdown_actions_subsys); return rc; -- cgit v1.2.3-59-g8ed1b From d91885bef25be2bab686bed082a5d82e358333b9 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 2 Nov 2007 17:17:00 -0400 Subject: kset: convert s390 ipl.c to use kset_create Dynamically create the kset instead of declaring it statically. This makes the kobject attributes now work properly that I broke in the previous patch. Cc: Kay Sievers Cc: Michael Holzheu Cc: Heiko Carstens Cc: Volker Sameske Cc: Cornelia Huck Signed-off-by: Greg Kroah-Hartman --- arch/s390/kernel/ipl.c | 73 +++++++++++++++++++++++++------------------------- 1 file changed, 37 insertions(+), 36 deletions(-) diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index 50be9d063d68..c8179fc30baa 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -426,7 +426,7 @@ static struct attribute_group ipl_unknown_attr_group = { .attrs = ipl_unknown_attrs, }; -static decl_subsys(ipl, NULL); +static struct kset *ipl_kset; /* * reipl section @@ -602,7 +602,7 @@ static ssize_t reipl_type_store(struct kobject *kobj, static struct kobj_attribute reipl_type_attr = __ATTR(reipl_type, 0644, reipl_type_show, reipl_type_store); -static decl_subsys(reipl, NULL); +static struct kset *reipl_kset; /* * dump section @@ -699,13 +699,13 @@ static ssize_t dump_type_store(struct kobject *kobj, static struct kobj_attribute dump_type_attr = __ATTR(dump_type, 0644, dump_type_show, dump_type_store); -static decl_subsys(dump, NULL); +static struct kset *dump_kset; /* * Shutdown actions section */ -static decl_subsys(shutdown_actions, NULL); +static struct kset *shutdown_actions_kset; /* on panic */ @@ -830,23 +830,23 @@ static int __init ipl_register_fcp_files(void) { int rc; - rc = sysfs_create_group(&ipl_subsys.kobj, + rc = sysfs_create_group(&ipl_kset->kobj, &ipl_fcp_attr_group); if (rc) goto out; - rc = sysfs_create_bin_file(&ipl_subsys.kobj, + rc = sysfs_create_bin_file(&ipl_kset->kobj, &ipl_parameter_attr); if (rc) goto out_ipl_parm; - rc = sysfs_create_bin_file(&ipl_subsys.kobj, + rc = sysfs_create_bin_file(&ipl_kset->kobj, &ipl_scp_data_attr); if (!rc) goto out; - sysfs_remove_bin_file(&ipl_subsys.kobj, &ipl_parameter_attr); + sysfs_remove_bin_file(&ipl_kset->kobj, &ipl_parameter_attr); out_ipl_parm: - sysfs_remove_group(&ipl_subsys.kobj, &ipl_fcp_attr_group); + sysfs_remove_group(&ipl_kset->kobj, &ipl_fcp_attr_group); out: return rc; } @@ -855,12 +855,12 @@ static int __init ipl_init(void) { int rc; - rc = firmware_register(&ipl_subsys); - if (rc) - return rc; + ipl_kset = kset_create_and_add("ipl", NULL, &firmware_kset->kobj); + if (!ipl_kset) + return -ENOMEM; switch (ipl_info.type) { case IPL_TYPE_CCW: - rc = sysfs_create_group(&ipl_subsys.kobj, + rc = sysfs_create_group(&ipl_kset->kobj, &ipl_ccw_attr_group); break; case IPL_TYPE_FCP: @@ -868,16 +868,16 @@ static int __init ipl_init(void) rc = ipl_register_fcp_files(); break; case IPL_TYPE_NSS: - rc = sysfs_create_group(&ipl_subsys.kobj, + rc = sysfs_create_group(&ipl_kset->kobj, &ipl_nss_attr_group); break; default: - rc = sysfs_create_group(&ipl_subsys.kobj, + rc = sysfs_create_group(&ipl_kset->kobj, &ipl_unknown_attr_group); break; } if (rc) - firmware_unregister(&ipl_subsys); + kset_unregister(ipl_kset); return rc; } @@ -899,7 +899,7 @@ static int __init reipl_nss_init(void) if (!MACHINE_IS_VM) return 0; - rc = sysfs_create_group(&reipl_subsys.kobj, &reipl_nss_attr_group); + rc = sysfs_create_group(&reipl_kset->kobj, &reipl_nss_attr_group); if (rc) return rc; strncpy(reipl_nss_name, kernel_nss_name, NSS_NAME_SIZE + 1); @@ -914,7 +914,7 @@ static int __init reipl_ccw_init(void) reipl_block_ccw = (void *) get_zeroed_page(GFP_KERNEL); if (!reipl_block_ccw) return -ENOMEM; - rc = sysfs_create_group(&reipl_subsys.kobj, &reipl_ccw_attr_group); + rc = sysfs_create_group(&reipl_kset->kobj, &reipl_ccw_attr_group); if (rc) { free_page((unsigned long)reipl_block_ccw); return rc; @@ -952,7 +952,7 @@ static int __init reipl_fcp_init(void) reipl_block_fcp = (void *) get_zeroed_page(GFP_KERNEL); if (!reipl_block_fcp) return -ENOMEM; - rc = sysfs_create_group(&reipl_subsys.kobj, &reipl_fcp_attr_group); + rc = sysfs_create_group(&reipl_kset->kobj, &reipl_fcp_attr_group); if (rc) { free_page((unsigned long)reipl_block_fcp); return rc; @@ -974,12 +974,12 @@ static int __init reipl_init(void) { int rc; - rc = firmware_register(&reipl_subsys); - if (rc) - return rc; - rc = sysfs_create_file(&reipl_subsys.kobj, &reipl_type_attr.attr); + reipl_kset = kset_create_and_add("reipl", NULL, &firmware_kset->kobj); + if (!reipl_kset) + return -ENOMEM; + rc = sysfs_create_file(&reipl_kset->kobj, &reipl_type_attr.attr); if (rc) { - firmware_unregister(&reipl_subsys); + kset_unregister(reipl_kset); return rc; } rc = reipl_ccw_init(); @@ -1004,7 +1004,7 @@ static int __init dump_ccw_init(void) dump_block_ccw = (void *) get_zeroed_page(GFP_KERNEL); if (!dump_block_ccw) return -ENOMEM; - rc = sysfs_create_group(&dump_subsys.kobj, &dump_ccw_attr_group); + rc = sysfs_create_group(&dump_kset->kobj, &dump_ccw_attr_group); if (rc) { free_page((unsigned long)dump_block_ccw); return rc; @@ -1028,7 +1028,7 @@ static int __init dump_fcp_init(void) dump_block_fcp = (void *) get_zeroed_page(GFP_KERNEL); if (!dump_block_fcp) return -ENOMEM; - rc = sysfs_create_group(&dump_subsys.kobj, &dump_fcp_attr_group); + rc = sysfs_create_group(&dump_kset->kobj, &dump_fcp_attr_group); if (rc) { free_page((unsigned long)dump_block_fcp); return rc; @@ -1063,12 +1063,12 @@ static int __init dump_init(void) { int rc; - rc = firmware_register(&dump_subsys); - if (rc) - return rc; - rc = sysfs_create_file(&dump_subsys.kobj, &dump_type_attr.attr); + dump_kset = kset_create_and_add("dump", NULL, &firmware_kset->kobj); + if (!dump_kset) + return -ENOMEM; + rc = sysfs_create_file(&dump_kset->kobj, &dump_type_attr); if (rc) { - firmware_unregister(&dump_subsys); + kset_unregister(dump_kset); return rc; } rc = dump_ccw_init(); @@ -1085,12 +1085,13 @@ static int __init shutdown_actions_init(void) { int rc; - rc = firmware_register(&shutdown_actions_subsys); - if (rc) - return rc; - rc = sysfs_create_file(&shutdown_actions_subsys.kobj, &on_panic_attr.attr); + shutdown_actions_kset = kset_create_and_add("shutdown_actions", NULL, + &firmware_kset->kobj); + if (!shutdown_actions_kset) + return -ENOMEM; + rc = sysfs_create_file(&shutdown_actions_kset->kobj, &on_panic_attr); if (rc) { - firmware_unregister(&shutdown_actions_subsys); + kset_unregister(shutdown_actions_kset); return rc; } atomic_notifier_chain_register(&panic_notifier_list, -- cgit v1.2.3-59-g8ed1b From 7f548217860a7cf8a345d87792a07512450dfbff Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 2 Nov 2007 15:25:00 -0700 Subject: kobject: convert parisc/pdc_stable to kobj_attr interface This makes the code a bit simpler and and gets us one step closer to deleting the deprecated subsys_attr code. NOTE, this needs the next patch in the series in order to work properly. This will build, but the sysfs files will not properly operate. Cc: Kay Sievers Cc: Thibaut VARENE Cc: Matthew Wilcox Cc: Grant Grundler Cc: Kyle McMartin Signed-off-by: Greg Kroah-Hartman --- drivers/parisc/pdc_stable.c | 147 +++++++++++++++++++++----------------------- 1 file changed, 70 insertions(+), 77 deletions(-) diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c index 1382be64cc3f..e1b9cbaf4456 100644 --- a/drivers/parisc/pdc_stable.c +++ b/drivers/parisc/pdc_stable.c @@ -120,7 +120,7 @@ struct pdcspath_entry pdcspath_entry_##_name = { \ }; #define PDCS_ATTR(_name, _mode, _show, _store) \ -struct subsys_attribute pdcs_attr_##_name = { \ +struct kobj_attribute pdcs_attr_##_name = { \ .attr = {.name = __stringify(_name), .mode = _mode}, \ .show = _show, \ .store = _store, \ @@ -523,15 +523,15 @@ static struct pdcspath_entry *pdcspath_entries[] = { /** * pdcs_size_read - Stable Storage size output. - * @kset: An allocated and populated struct kset. We don't use it tho. * @buf: The output buffer to write to. */ -static ssize_t -pdcs_size_read(struct kset *kset, char *buf) +static ssize_t pdcs_size_read(struct kobject *kobj, + struct kobj_attribute *attr, + char *buf) { char *out = buf; - if (!kset || !buf) + if (!buf) return -EINVAL; /* show the size of the stable storage */ @@ -542,17 +542,17 @@ pdcs_size_read(struct kset *kset, char *buf) /** * pdcs_auto_read - Stable Storage autoboot/search flag output. - * @kset: An allocated and populated struct kset. We don't use it tho. * @buf: The output buffer to write to. * @knob: The PF_AUTOBOOT or PF_AUTOSEARCH flag */ -static ssize_t -pdcs_auto_read(struct kset *kset, char *buf, int knob) +static ssize_t pdcs_auto_read(struct kobject *kobj, + struct kobj_attribute *attr, + char *buf, int knob) { char *out = buf; struct pdcspath_entry *pathentry; - if (!kset || !buf) + if (!buf) return -EINVAL; /* Current flags are stored in primary boot path entry */ @@ -568,40 +568,37 @@ pdcs_auto_read(struct kset *kset, char *buf, int knob) /** * pdcs_autoboot_read - Stable Storage autoboot flag output. - * @kset: An allocated and populated struct kset. We don't use it tho. * @buf: The output buffer to write to. */ -static inline ssize_t -pdcs_autoboot_read(struct kset *kset, char *buf) +static ssize_t pdcs_autoboot_read(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) { - return pdcs_auto_read(kset, buf, PF_AUTOBOOT); + return pdcs_auto_read(kobj, attr, buf, PF_AUTOBOOT); } /** * pdcs_autosearch_read - Stable Storage autoboot flag output. - * @kset: An allocated and populated struct kset. We don't use it tho. * @buf: The output buffer to write to. */ -static inline ssize_t -pdcs_autosearch_read(struct kset *kset, char *buf) +static ssize_t pdcs_autosearch_read(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) { - return pdcs_auto_read(kset, buf, PF_AUTOSEARCH); + return pdcs_auto_read(kobj, attr, buf, PF_AUTOSEARCH); } /** * pdcs_timer_read - Stable Storage timer count output (in seconds). - * @kset: An allocated and populated struct kset. We don't use it tho. * @buf: The output buffer to write to. * * The value of the timer field correponds to a number of seconds in powers of 2. */ -static ssize_t -pdcs_timer_read(struct kset *kset, char *buf) +static ssize_t pdcs_timer_read(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) { char *out = buf; struct pdcspath_entry *pathentry; - if (!kset || !buf) + if (!buf) return -EINVAL; /* Current flags are stored in primary boot path entry */ @@ -618,15 +615,14 @@ pdcs_timer_read(struct kset *kset, char *buf) /** * pdcs_osid_read - Stable Storage OS ID register output. - * @kset: An allocated and populated struct kset. We don't use it tho. * @buf: The output buffer to write to. */ -static ssize_t -pdcs_osid_read(struct kset *kset, char *buf) +static ssize_t pdcs_osid_read(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) { char *out = buf; - if (!kset || !buf) + if (!buf) return -EINVAL; out += sprintf(out, "%s dependent data (0x%.4x)\n", @@ -637,18 +633,17 @@ pdcs_osid_read(struct kset *kset, char *buf) /** * pdcs_osdep1_read - Stable Storage OS-Dependent data area 1 output. - * @kset: An allocated and populated struct kset. We don't use it tho. * @buf: The output buffer to write to. * * This can hold 16 bytes of OS-Dependent data. */ -static ssize_t -pdcs_osdep1_read(struct kset *kset, char *buf) +static ssize_t pdcs_osdep1_read(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) { char *out = buf; u32 result[4]; - if (!kset || !buf) + if (!buf) return -EINVAL; if (pdc_stable_read(PDCS_ADDR_OSD1, &result, sizeof(result)) != PDC_OK) @@ -664,18 +659,17 @@ pdcs_osdep1_read(struct kset *kset, char *buf) /** * pdcs_diagnostic_read - Stable Storage Diagnostic register output. - * @kset: An allocated and populated struct kset. We don't use it tho. * @buf: The output buffer to write to. * * I have NFC how to interpret the content of that register ;-). */ -static ssize_t -pdcs_diagnostic_read(struct kset *kset, char *buf) +static ssize_t pdcs_diagnostic_read(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) { char *out = buf; u32 result; - if (!kset || !buf) + if (!buf) return -EINVAL; /* get diagnostic */ @@ -689,18 +683,17 @@ pdcs_diagnostic_read(struct kset *kset, char *buf) /** * pdcs_fastsize_read - Stable Storage FastSize register output. - * @kset: An allocated and populated struct kset. We don't use it tho. * @buf: The output buffer to write to. * * This register holds the amount of system RAM to be tested during boot sequence. */ -static ssize_t -pdcs_fastsize_read(struct kset *kset, char *buf) +static ssize_t pdcs_fastsize_read(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) { char *out = buf; u32 result; - if (!kset || !buf) + if (!buf) return -EINVAL; /* get fast-size */ @@ -718,13 +711,12 @@ pdcs_fastsize_read(struct kset *kset, char *buf) /** * pdcs_osdep2_read - Stable Storage OS-Dependent data area 2 output. - * @kset: An allocated and populated struct kset. We don't use it tho. * @buf: The output buffer to write to. * * This can hold pdcs_size - 224 bytes of OS-Dependent data, when available. */ -static ssize_t -pdcs_osdep2_read(struct kset *kset, char *buf) +static ssize_t pdcs_osdep2_read(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) { char *out = buf; unsigned long size; @@ -736,7 +728,7 @@ pdcs_osdep2_read(struct kset *kset, char *buf) size = pdcs_size - 224; - if (!kset || !buf) + if (!buf) return -EINVAL; for (i=0; ishow) - error = subsys_create_file(&stable_subsys, attr); - + error = sysfs_create_group(&stable_subsys.kobj, pdcs_attr_group); + /* register the paths subsys as a subsystem of stable subsys */ paths_subsys.kobj.kset = &stable_subsys; if ((rc = subsystem_register(&paths_subsys))) -- cgit v1.2.3-59-g8ed1b From 4443d07fcfab39c4d2d9d7711cff983f15b374fc Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 2 Nov 2007 15:25:00 -0700 Subject: kset: convert parisc/pdc_stable.c to use kset_create Dynamically create the kset instead of declaring it statically. This makes the kobject attributes now work properly that I broke in the previous patch. Cc: Kay Sievers Cc: Thibaut VARENE Cc: Matthew Wilcox Cc: Grant Grundler Cc: Kyle McMartin Signed-off-by: Greg Kroah-Hartman --- drivers/parisc/pdc_stable.c | 38 +++++++++++++++++++++----------------- 1 file changed, 21 insertions(+), 17 deletions(-) diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c index e1b9cbaf4456..444483405abf 100644 --- a/drivers/parisc/pdc_stable.c +++ b/drivers/parisc/pdc_stable.c @@ -960,8 +960,8 @@ static struct attribute_group pdcs_attr_group = { .attrs = pdcs_subsys_attrs, }; -static decl_subsys(paths, NULL); -static decl_subsys(stable, NULL); +static struct kset *stable_kset; +static struct kset *paths_kset; /** * pdcs_register_pathentries - Prepares path entries kobjects for sysfs usage. @@ -993,7 +993,7 @@ pdcs_register_pathentries(void) if ((err = kobject_set_name(&entry->kobj, "%s", entry->name))) return err; - entry->kobj.kset = &paths_subsys; + entry->kobj.kset = paths_kset; entry->kobj.ktype = &ktype_pdcspath; if ((err = kobject_register(&entry->kobj))) return err; @@ -1058,19 +1058,24 @@ pdc_stable_init(void) /* the actual result is 16 bits away */ pdcs_osid = (u16)(result >> 16); - /* For now we'll register the stable subsys within this driver */ - if ((rc = firmware_register(&stable_subsys))) + /* For now we'll register the stable kset within this driver */ + stable_kset = kset_create_and_add("stable", NULL, &firmware_kset->kobj); + if (!stable_kset) { + rc = -ENOMEM; goto fail_firmreg; + } /* Don't forget the root entries */ - error = sysfs_create_group(&stable_subsys.kobj, pdcs_attr_group); + error = sysfs_create_group(&stable_kset->kobj, pdcs_attr_group); - /* register the paths subsys as a subsystem of stable subsys */ - paths_subsys.kobj.kset = &stable_subsys; - if ((rc = subsystem_register(&paths_subsys))) - goto fail_subsysreg; + /* register the paths kset as a child of the stable kset */ + paths_kset = kset_create_and_add("paths", NULL, &stable_kset->kobj); + if (!paths_kset) { + rc = -ENOMEM; + goto fail_ksetreg; + } - /* now we create all "files" for the paths subsys */ + /* now we create all "files" for the paths kset */ if ((rc = pdcs_register_pathentries())) goto fail_pdcsreg; @@ -1078,10 +1083,10 @@ pdc_stable_init(void) fail_pdcsreg: pdcs_unregister_pathentries(); - subsystem_unregister(&paths_subsys); + kset_unregister(paths_kset); -fail_subsysreg: - firmware_unregister(&stable_subsys); +fail_ksetreg: + kset_unregister(stable_kset); fail_firmreg: printk(KERN_INFO PDCS_PREFIX " bailing out\n"); @@ -1092,9 +1097,8 @@ static void __exit pdc_stable_exit(void) { pdcs_unregister_pathentries(); - subsystem_unregister(&paths_subsys); - - firmware_unregister(&stable_subsys); + kset_unregister(paths_kset); + kset_unregister(stable_kset); } -- cgit v1.2.3-59-g8ed1b From 000f2a4d8cfc1e1cbc0aa98136015e7ae7719b46 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Fri, 2 Nov 2007 13:47:53 +0100 Subject: Driver Core: kill subsys_attribute and default sysfs ops Remove the no longer needed subsys_attributes, they are all converted to the more sensical kobj_attributes. There is no longer a magic fallback in sysfs attribute operations, all kobjects which create simple attributes need explicitely a ktype assigned, which tells the core what was intended here. Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- fs/sysfs/file.c | 63 ++++++++----------------------------------------- include/linux/kobject.h | 9 ------- lib/kobject.c | 21 ----------------- 3 files changed, 10 insertions(+), 83 deletions(-) diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c index 387a63662793..8acf82bba44c 100644 --- a/fs/sysfs/file.c +++ b/fs/sysfs/file.c @@ -20,43 +20,6 @@ #include "sysfs.h" -#define to_sattr(a) container_of(a,struct subsys_attribute, attr) - -/* - * Subsystem file operations. - * These operations allow subsystems to have files that can be - * read/written. - */ -static ssize_t -subsys_attr_show(struct kobject * kobj, struct attribute * attr, char * page) -{ - struct kset *kset = to_kset(kobj); - struct subsys_attribute * sattr = to_sattr(attr); - ssize_t ret = -EIO; - - if (sattr->show) - ret = sattr->show(kset, page); - return ret; -} - -static ssize_t -subsys_attr_store(struct kobject * kobj, struct attribute * attr, - const char * page, size_t count) -{ - struct kset *kset = to_kset(kobj); - struct subsys_attribute * sattr = to_sattr(attr); - ssize_t ret = -EIO; - - if (sattr->store) - ret = sattr->store(kset, page, count); - return ret; -} - -static struct sysfs_ops subsys_sysfs_ops = { - .show = subsys_attr_show, - .store = subsys_attr_store, -}; - /* * There's one sysfs_buffer for each open file and one * sysfs_open_dirent for each sysfs_dirent with one or more open @@ -354,29 +317,23 @@ static int sysfs_open_file(struct inode *inode, struct file *file) { struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata; struct kobject *kobj = attr_sd->s_parent->s_dir.kobj; - struct sysfs_buffer * buffer; - struct sysfs_ops * ops = NULL; - int error; + struct sysfs_buffer *buffer; + struct sysfs_ops *ops; + int error = -EACCES; /* need attr_sd for attr and ops, its parent for kobj */ if (!sysfs_get_active_two(attr_sd)) return -ENODEV; - /* if the kobject has no ktype, then we assume that it is a subsystem - * itself, and use ops for it. - */ - if (kobj->ktype) + /* every kobject with an attribute needs a ktype assigned */ + if (kobj->ktype && kobj->ktype->sysfs_ops) ops = kobj->ktype->sysfs_ops; - else - ops = &subsys_sysfs_ops; - - error = -EACCES; - - /* No sysfs operations, either from having no subsystem, - * or the subsystem have no operations. - */ - if (!ops) + else { + printk(KERN_ERR "missing sysfs attribute operations for " + "kobject: %s\n", kobject_name(kobj)); + WARN_ON(1); goto err_out; + } /* File needs write support. * The inode's perms must say it's ok, diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 29dc444e3361..29841bb5badb 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -216,15 +216,6 @@ extern struct kset *firmware_kset; extern int __must_check subsystem_register(struct kset *); extern void subsystem_unregister(struct kset *); -struct subsys_attribute { - struct attribute attr; - ssize_t (*show)(struct kset *, char *); - ssize_t (*store)(struct kset *, const char *, size_t); -}; - -extern int __must_check subsys_create_file(struct kset *, - struct subsys_attribute *); - #if defined(CONFIG_HOTPLUG) int kobject_uevent(struct kobject *kobj, enum kobject_action action); int kobject_uevent_env(struct kobject *kobj, enum kobject_action action, diff --git a/lib/kobject.c b/lib/kobject.c index 99f6354a5751..c742ac25228a 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -810,26 +810,6 @@ void subsystem_unregister(struct kset *s) kset_unregister(s); } -/** - * subsystem_create_file - export sysfs attribute file. - * @s: subsystem. - * @a: subsystem attribute descriptor. - */ - -int subsys_create_file(struct kset *s, struct subsys_attribute *a) -{ - int error = 0; - - if (!s || !a) - return -EINVAL; - - if (kset_get(s)) { - error = sysfs_create_file(&s->kobj, &a->attr); - kset_put(s); - } - return error; -} - static void kset_release(struct kobject *kobj) { struct kset *kset = container_of(kobj, struct kset, kobj); @@ -927,4 +907,3 @@ EXPORT_SYMBOL(kset_unregister); EXPORT_SYMBOL(subsystem_register); EXPORT_SYMBOL(subsystem_unregister); -EXPORT_SYMBOL(subsys_create_file); -- cgit v1.2.3-59-g8ed1b From 9651d350ab2c1b9ef1875be2a9def1c375e6503f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 2 Nov 2007 16:19:59 -0700 Subject: kset: convert edd to use kset_create Dynamically create the kset instead of declaring it statically. Cc: Kay Sievers Cc: Matt Domsch Signed-off-by: Greg Kroah-Hartman --- drivers/firmware/edd.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c index fc567fad3f7c..f07f37047cd1 100644 --- a/drivers/firmware/edd.c +++ b/drivers/firmware/edd.c @@ -631,7 +631,7 @@ static struct kobj_type edd_ktype = { .default_attrs = def_attrs, }; -static decl_subsys(edd, NULL); +static struct kset *edd_kset; /** @@ -723,7 +723,7 @@ edd_device_register(struct edd_device *edev, int i) edd_dev_set_info(edev, i); kobject_set_name(&edev->kobj, "int13_dev%02x", 0x80 + i); - edev->kobj.kset = &edd_subsys; + edev->kobj.kset = edd_kset; edev->kobj.ktype = &edd_ktype; error = kobject_register(&edev->kobj); if (!error) @@ -756,9 +756,9 @@ edd_init(void) return 1; } - rc = firmware_register(&edd_subsys); - if (rc) - return rc; + edd_kset = kset_create_and_add("edd", NULL, &firmware_kset->kobj); + if (!edd_kset) + return -ENOMEM; for (i = 0; i < edd_num_devices() && !rc; i++) { edev = kzalloc(sizeof (*edev), GFP_KERNEL); @@ -774,7 +774,7 @@ edd_init(void) } if (rc) - firmware_unregister(&edd_subsys); + kset_unregister(edd_kset); return rc; } @@ -788,7 +788,7 @@ edd_exit(void) if ((edev = edd_devices[i])) edd_device_unregister(edev); } - firmware_unregister(&edd_subsys); + kset_unregister(edd_kset); } late_initcall(edd_init); -- cgit v1.2.3-59-g8ed1b From 99e0d2fc6c60ca44f56203eeda9fc0e07b508f06 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 2 Nov 2007 16:19:59 -0700 Subject: kobject: convert /sys/firmware/acpi/ to use kobject_create We don't need a kset here, a simple kobject will do just fine, so dynamically create the kobject and use it. Cc: Kay Sievers Cc: Len Brown Signed-off-by: Greg Kroah-Hartman --- drivers/acpi/bus.c | 11 ++++++----- drivers/acpi/system.c | 2 +- include/acpi/acpi_bus.h | 2 +- 3 files changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 7c172d9d7acf..e550da684a47 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -743,7 +743,7 @@ static int __init acpi_bus_init(void) return -ENODEV; } -decl_subsys(acpi, NULL); +struct kobject *acpi_kobj; static int __init acpi_init(void) { @@ -755,10 +755,11 @@ static int __init acpi_init(void) return -ENODEV; } - result = firmware_register(&acpi_subsys); - if (result < 0) - printk(KERN_WARNING "%s: firmware_register error: %d\n", - __FUNCTION__, result); + acpi_kobj = kobject_create_and_add("acpi", &firmware_kset->kobj); + if (!acpi_kobj) { + printk(KERN_WARNING "%s: kset create error\n", __FUNCTION__); + acpi_kobj = NULL; + } result = acpi_bus_init(); diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c index edee2806e37b..c22b93aab7fe 100644 --- a/drivers/acpi/system.c +++ b/drivers/acpi/system.c @@ -135,7 +135,7 @@ static int acpi_system_sysfs_init(void) int table_index = 0; int result; - tables_kobj.parent = &acpi_subsys.kobj; + tables_kobj.parent = acpi_kobj; kobject_set_name(&tables_kobj, "tables"); result = kobject_register(&tables_kobj); if (result) diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 7b74b60a68a4..fb7171b1bd22 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -319,7 +319,7 @@ struct acpi_bus_event { u32 data; }; -extern struct kset acpi_subsys; +extern struct kobject *acpi_kobj; extern int acpi_bus_generate_netlink_event(const char*, const char*, u8, int); /* * External Functions -- cgit v1.2.3-59-g8ed1b From 15f2f9b3a9db65aaf908fe7ee17bbe262ae3550f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 2 Nov 2007 16:19:59 -0700 Subject: firmware: remove firmware_(un)register() These functions are no longer called or needed, so we can remove them. As I rewrote the whole firmware.c file, add my copyright. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/firmware.c | 19 ++----------------- include/linux/device.h | 5 ----- 2 files changed, 2 insertions(+), 22 deletions(-) diff --git a/drivers/base/firmware.c b/drivers/base/firmware.c index c7f635b11dfd..9efff481f5dc 100644 --- a/drivers/base/firmware.c +++ b/drivers/base/firmware.c @@ -3,11 +3,11 @@ * * Copyright (c) 2002-3 Patrick Mochel * Copyright (c) 2002-3 Open Source Development Labs + * Copyright (c) 2007 Greg Kroah-Hartman + * Copyright (c) 2007 Novell Inc. * * This file is released under the GPLv2 - * */ - #include #include #include @@ -18,18 +18,6 @@ struct kset *firmware_kset; EXPORT_SYMBOL_GPL(firmware_kset); -int firmware_register(struct kset *s) -{ - s->kobj.kset = firmware_kset; - s->kobj.ktype = NULL; - return subsystem_register(s); -} - -void firmware_unregister(struct kset *s) -{ - subsystem_unregister(s); -} - int __init firmware_init(void) { firmware_kset = kset_create_and_add("firmware", NULL, NULL); @@ -37,6 +25,3 @@ int __init firmware_init(void) return -ENOMEM; return 0; } - -EXPORT_SYMBOL_GPL(firmware_register); -EXPORT_SYMBOL_GPL(firmware_unregister); diff --git a/include/linux/device.h b/include/linux/device.h index 110ace0dec3f..a3b3ff15fc87 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -555,11 +555,6 @@ extern void device_shutdown(void); /* drivers/base/sys.c */ extern void sysdev_shutdown(void); - -/* drivers/base/firmware.c */ -extern int __must_check firmware_register(struct kset *); -extern void firmware_unregister(struct kset *); - /* debugging and troubleshooting/diagnostic helpers. */ extern const char *dev_driver_string(struct device *dev); #define dev_printk(level, dev, format, arg...) \ -- cgit v1.2.3-59-g8ed1b From f62ed9e33b3ccff54d66b08f82d11940bb9e269b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 5 Nov 2007 13:16:15 -0800 Subject: firmware: change firmware_kset to firmware_kobj There is no firmware "subsystem" it's just a directory in /sys that other portions of the kernel want to hook into. So make it a kobject not a kset to help alivate anyone who tries to do some odd kset-like things with this. Cc: Kay Sievers Cc: Cornelia Huck Signed-off-by: Greg Kroah-Hartman --- arch/s390/kernel/ipl.c | 8 ++++---- drivers/acpi/bus.c | 2 +- drivers/base/firmware.c | 8 ++++---- drivers/firmware/edd.c | 2 +- drivers/firmware/efivars.c | 2 +- drivers/parisc/pdc_stable.c | 2 +- include/linux/kobject.h | 4 ++-- 7 files changed, 14 insertions(+), 14 deletions(-) diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index c8179fc30baa..b97694fa62ec 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -855,7 +855,7 @@ static int __init ipl_init(void) { int rc; - ipl_kset = kset_create_and_add("ipl", NULL, &firmware_kset->kobj); + ipl_kset = kset_create_and_add("ipl", NULL, firmware_kobj); if (!ipl_kset) return -ENOMEM; switch (ipl_info.type) { @@ -974,7 +974,7 @@ static int __init reipl_init(void) { int rc; - reipl_kset = kset_create_and_add("reipl", NULL, &firmware_kset->kobj); + reipl_kset = kset_create_and_add("reipl", NULL, firmware_kobj); if (!reipl_kset) return -ENOMEM; rc = sysfs_create_file(&reipl_kset->kobj, &reipl_type_attr.attr); @@ -1063,7 +1063,7 @@ static int __init dump_init(void) { int rc; - dump_kset = kset_create_and_add("dump", NULL, &firmware_kset->kobj); + dump_kset = kset_create_and_add("dump", NULL, firmware_kobj); if (!dump_kset) return -ENOMEM; rc = sysfs_create_file(&dump_kset->kobj, &dump_type_attr); @@ -1086,7 +1086,7 @@ static int __init shutdown_actions_init(void) int rc; shutdown_actions_kset = kset_create_and_add("shutdown_actions", NULL, - &firmware_kset->kobj); + firmware_kobj); if (!shutdown_actions_kset) return -ENOMEM; rc = sysfs_create_file(&shutdown_actions_kset->kobj, &on_panic_attr); diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index e550da684a47..1b4cf984b081 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -755,7 +755,7 @@ static int __init acpi_init(void) return -ENODEV; } - acpi_kobj = kobject_create_and_add("acpi", &firmware_kset->kobj); + acpi_kobj = kobject_create_and_add("acpi", firmware_kobj); if (!acpi_kobj) { printk(KERN_WARNING "%s: kset create error\n", __FUNCTION__); acpi_kobj = NULL; diff --git a/drivers/base/firmware.c b/drivers/base/firmware.c index 9efff481f5dc..113815556809 100644 --- a/drivers/base/firmware.c +++ b/drivers/base/firmware.c @@ -15,13 +15,13 @@ #include "base.h" -struct kset *firmware_kset; -EXPORT_SYMBOL_GPL(firmware_kset); +struct kobject *firmware_kobj; +EXPORT_SYMBOL_GPL(firmware_kobj); int __init firmware_init(void) { - firmware_kset = kset_create_and_add("firmware", NULL, NULL); - if (!firmware_kset) + firmware_kobj = kobject_create_and_add("firmware", NULL); + if (!firmware_kobj) return -ENOMEM; return 0; } diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c index f07f37047cd1..ddcc95793068 100644 --- a/drivers/firmware/edd.c +++ b/drivers/firmware/edd.c @@ -756,7 +756,7 @@ edd_init(void) return 1; } - edd_kset = kset_create_and_add("edd", NULL, &firmware_kset->kobj); + edd_kset = kset_create_and_add("edd", NULL, firmware_kobj); if (!edd_kset) return -ENOMEM; diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c index e17cd8133548..d1ad48190afc 100644 --- a/drivers/firmware/efivars.c +++ b/drivers/firmware/efivars.c @@ -668,7 +668,7 @@ efivars_init(void) /* * For now we'll register the efi subsys within this driver */ - efi_kset = kset_create_and_add("efi", NULL, &firmware_kset->kobj); + efi_kset = kset_create_and_add("efi", NULL, firmware_kobj); if (!efi_kset) { printk(KERN_ERR "efivars: Firmware registration failed.\n"); error = -ENOMEM; diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c index 444483405abf..ef1a353e5540 100644 --- a/drivers/parisc/pdc_stable.c +++ b/drivers/parisc/pdc_stable.c @@ -1059,7 +1059,7 @@ pdc_stable_init(void) pdcs_osid = (u16)(result >> 16); /* For now we'll register the stable kset within this driver */ - stable_kset = kset_create_and_add("stable", NULL, &firmware_kset->kobj); + stable_kset = kset_create_and_add("stable", NULL, firmware_kobj); if (!stable_kset) { rc = -ENOMEM; goto fail_firmreg; diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 29841bb5badb..673623f18464 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -210,8 +210,8 @@ extern struct kset *kernel_kset; extern struct kobject *hypervisor_kobj; /* The global /sys/power/ kset for people to chain off of */ extern struct kset *power_kset; -/* The global /sys/firmware/ kset for people to chain off of */ -extern struct kset *firmware_kset; +/* The global /sys/firmware/ kobject for people to chain off of */ +extern struct kobject *firmware_kobj; extern int __must_check subsystem_register(struct kset *); extern void subsystem_unregister(struct kset *); -- cgit v1.2.3-59-g8ed1b From c60b71787982cefcf9fa09aa281fa8c4c685d557 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 2 Nov 2007 16:19:59 -0700 Subject: kset: convert ocfs2 to use kset_create Dynamically create the kset instead of declaring it statically. Also use the new kobj_attribute which cleans up this file a _lot_. Cc: Kay Sievers Cc: Mark Fasheh Cc: Kurt Hackel Signed-off-by: Greg Kroah-Hartman --- fs/ocfs2/cluster/masklog.c | 4 +-- fs/ocfs2/cluster/sys.c | 83 ++++++++++++---------------------------------- 2 files changed, 23 insertions(+), 64 deletions(-) diff --git a/fs/ocfs2/cluster/masklog.c b/fs/ocfs2/cluster/masklog.c index dead319932b3..23c732f27529 100644 --- a/fs/ocfs2/cluster/masklog.c +++ b/fs/ocfs2/cluster/masklog.c @@ -146,7 +146,7 @@ static struct kset mlog_kset = { .kobj = {.ktype = &mlog_ktype}, }; -int mlog_sys_init(struct kset *o2cb_subsys) +int mlog_sys_init(struct kset *o2cb_kset) { int i = 0; @@ -157,7 +157,7 @@ int mlog_sys_init(struct kset *o2cb_subsys) mlog_attr_ptrs[i] = NULL; kobject_set_name(&mlog_kset.kobj, "logmask"); - mlog_kset.kobj.kset = o2cb_subsys; + mlog_kset.kobj.kset = o2cb_kset; return kset_register(&mlog_kset); } diff --git a/fs/ocfs2/cluster/sys.c b/fs/ocfs2/cluster/sys.c index 880d0138bb0a..a4b07730b2e1 100644 --- a/fs/ocfs2/cluster/sys.c +++ b/fs/ocfs2/cluster/sys.c @@ -28,96 +28,55 @@ #include #include #include +#include #include "ocfs2_nodemanager.h" #include "masklog.h" #include "sys.h" -struct o2cb_attribute { - struct attribute attr; - ssize_t (*show)(char *buf); - ssize_t (*store)(const char *buf, size_t count); -}; - -#define O2CB_ATTR(_name, _mode, _show, _store) \ -struct o2cb_attribute o2cb_attr_##_name = __ATTR(_name, _mode, _show, _store) - -#define to_o2cb_attr(_attr) container_of(_attr, struct o2cb_attribute, attr) -static ssize_t o2cb_interface_revision_show(char *buf) +static ssize_t version_show(struct kobject *kobj, struct kobj_attribute *attr, + char *buf) { return snprintf(buf, PAGE_SIZE, "%u\n", O2NM_API_VERSION); } - -static O2CB_ATTR(interface_revision, S_IFREG | S_IRUGO, o2cb_interface_revision_show, NULL); +static struct kobj_attribute attr_version = + __ATTR(interface_revision, S_IFREG | S_IRUGO, version_show, NULL); static struct attribute *o2cb_attrs[] = { - &o2cb_attr_interface_revision.attr, + &attr_version.attr, NULL, }; -static ssize_t -o2cb_show(struct kobject * kobj, struct attribute * attr, char * buffer); -static ssize_t -o2cb_store(struct kobject * kobj, struct attribute * attr, - const char * buffer, size_t count); -static struct sysfs_ops o2cb_sysfs_ops = { - .show = o2cb_show, - .store = o2cb_store, +static struct attribute_group o2cb_attr_group = { + .attrs = o2cb_attrs, }; -static struct kobj_type o2cb_subsys_type = { - .default_attrs = o2cb_attrs, - .sysfs_ops = &o2cb_sysfs_ops, -}; - -/* gives us o2cb_subsys */ -static decl_subsys(o2cb, NULL); - -static ssize_t -o2cb_show(struct kobject * kobj, struct attribute * attr, char * buffer) -{ - struct o2cb_attribute *o2cb_attr = to_o2cb_attr(attr); - struct kset *sbs = to_kset(kobj); - - BUG_ON(sbs != &o2cb_subsys); - - if (o2cb_attr->show) - return o2cb_attr->show(buffer); - return -EIO; -} - -static ssize_t -o2cb_store(struct kobject * kobj, struct attribute * attr, - const char * buffer, size_t count) -{ - struct o2cb_attribute *o2cb_attr = to_o2cb_attr(attr); - struct kset *sbs = to_kset(kobj); - - BUG_ON(sbs != &o2cb_subsys); - - if (o2cb_attr->store) - return o2cb_attr->store(buffer, count); - return -EIO; -} +static struct kset *o2cb_kset; void o2cb_sys_shutdown(void) { mlog_sys_shutdown(); - subsystem_unregister(&o2cb_subsys); + kset_unregister(o2cb_kset); } int o2cb_sys_init(void) { int ret; - o2cb_subsys.kobj.ktype = &o2cb_subsys_type; - ret = subsystem_register(&o2cb_subsys); + o2cb_kset = kset_create_and_add("o2cb", NULL, fs_kobj); + if (!o2cb_kset) + return -ENOMEM; + + ret = sysfs_create_group(&o2cb_kset->kobj, &o2cb_attr_group); if (ret) - return ret; + goto error; - ret = mlog_sys_init(&o2cb_subsys); + ret = mlog_sys_init(o2cb_kset); if (ret) - subsystem_unregister(&o2cb_subsys); + goto error; + return 0; +error: + kset_unregister(o2cb_kset); return ret; } -- cgit v1.2.3-59-g8ed1b From 830d3cfb16728e2496edc2985ad8f68025135e37 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 6 Nov 2007 10:36:58 -0800 Subject: kset: convert block_subsys to use kset_create Dynamically create the kset instead of declaring it statically. We also rename block_subsys to block_kset to catch all users of this symbol with a build error instead of an easy-to-ignore build warning. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- block/genhd.c | 34 ++++++++++++++++------------------ fs/partitions/check.c | 6 +++--- 2 files changed, 19 insertions(+), 21 deletions(-) diff --git a/block/genhd.c b/block/genhd.c index 32227b7ecd17..69aa7389d484 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -17,7 +17,8 @@ #include #include -struct kset block_subsys; +struct kset *block_kset; +static struct kset_uevent_ops block_uevent_ops; static DEFINE_MUTEX(block_subsys_lock); /* @@ -221,7 +222,7 @@ void __init printk_all_partitions(void) mutex_lock(&block_subsys_lock); /* For each block device... */ - list_for_each_entry(sgp, &block_subsys.list, kobj.entry) { + list_for_each_entry(sgp, &block_kset->list, kobj.entry) { char buf[BDEVNAME_SIZE]; /* * Don't show empty devices or things that have been surpressed @@ -270,7 +271,7 @@ static void *part_start(struct seq_file *part, loff_t *pos) loff_t l = *pos; mutex_lock(&block_subsys_lock); - list_for_each(p, &block_subsys.list) + list_for_each(p, &block_kset->list) if (!l--) return list_entry(p, struct gendisk, kobj.entry); return NULL; @@ -280,7 +281,7 @@ static void *part_next(struct seq_file *part, void *v, loff_t *pos) { struct list_head *p = ((struct gendisk *)v)->kobj.entry.next; ++*pos; - return p==&block_subsys.list ? NULL : + return p==&block_kset->list ? NULL : list_entry(p, struct gendisk, kobj.entry); } @@ -295,7 +296,7 @@ static int show_partition(struct seq_file *part, void *v) int n; char buf[BDEVNAME_SIZE]; - if (&sgp->kobj.entry == block_subsys.list.next) + if (&sgp->kobj.entry == block_kset->list.next) seq_puts(part, "major minor #blocks name\n\n"); /* Don't show non-partitionable removeable devices or empty devices */ @@ -345,15 +346,14 @@ static struct kobject *base_probe(dev_t dev, int *part, void *data) static int __init genhd_device_init(void) { - int err; - bdev_map = kobj_map_init(base_probe, &block_subsys_lock); blk_dev_init(); - err = subsystem_register(&block_subsys); - if (err < 0) - printk(KERN_WARNING "%s: subsystem_register error: %d\n", - __FUNCTION__, err); - return err; + block_kset = kset_create_and_add("block", &block_uevent_ops, NULL); + if (!block_kset) { + printk(KERN_WARNING "%s: kset_create error\n", __FUNCTION__); + return -ENOMEM; + } + return 0; } subsys_initcall(genhd_device_init); @@ -584,8 +584,6 @@ static struct kset_uevent_ops block_uevent_ops = { .uevent = block_uevent, }; -decl_subsys(block, &block_uevent_ops); - /* * aggregate disk stat collector. Uses the same stats that the sysfs * entries do, above, but makes them available through one seq_file. @@ -603,7 +601,7 @@ static void *diskstats_start(struct seq_file *part, loff_t *pos) struct list_head *p; mutex_lock(&block_subsys_lock); - list_for_each(p, &block_subsys.list) + list_for_each(p, &block_kset->list) if (!k--) return list_entry(p, struct gendisk, kobj.entry); return NULL; @@ -613,7 +611,7 @@ static void *diskstats_next(struct seq_file *part, void *v, loff_t *pos) { struct list_head *p = ((struct gendisk *)v)->kobj.entry.next; ++*pos; - return p==&block_subsys.list ? NULL : + return p==&block_kset->list ? NULL : list_entry(p, struct gendisk, kobj.entry); } @@ -629,7 +627,7 @@ static int diskstats_show(struct seq_file *s, void *v) int n = 0; /* - if (&sgp->kobj.entry == block_subsys.kset.list.next) + if (&sgp->kobj.entry == block_kset->list.next) seq_puts(s, "major minor name" " rio rmerge rsect ruse wio wmerge " "wsect wuse running use aveq" @@ -721,7 +719,7 @@ struct gendisk *alloc_disk_node(int minors, int node_id) } } disk->minors = minors; - disk->kobj.kset = &block_subsys; + disk->kobj.kset = block_kset; disk->kobj.ktype = &ktype_block; kobject_init(&disk->kobj); rand_initialize_disk(disk); diff --git a/fs/partitions/check.c b/fs/partitions/check.c index 69685bb51c62..9184215f3ef3 100644 --- a/fs/partitions/check.c +++ b/fs/partitions/check.c @@ -316,7 +316,7 @@ static struct attribute * default_attrs[] = { NULL, }; -extern struct kset block_subsys; +extern struct kset *block_kset; static void part_release(struct kobject *kobj) { @@ -393,7 +393,7 @@ void add_partition(struct gendisk *disk, int part, sector_t start, sector_t len, kobject_add(&p->kobj); if (!disk->part_uevent_suppress) kobject_uevent(&p->kobj, KOBJ_ADD); - sysfs_create_link(&p->kobj, &block_subsys.kobj, "subsystem"); + sysfs_create_link(&p->kobj, &block_kset->kobj, "subsystem"); if (flags & ADDPART_FLAG_WHOLEDISK) { static struct attribute addpartattr = { .name = "whole_disk", @@ -448,7 +448,7 @@ static int disk_sysfs_symlinks(struct gendisk *disk) goto err_out_dev_link; } - err = sysfs_create_link(&disk->kobj, &block_subsys.kobj, + err = sysfs_create_link(&disk->kobj, &block_kset->kobj, "subsystem"); if (err) goto err_out_disk_name_lnk; -- cgit v1.2.3-59-g8ed1b From 5c03c7ab886859eb195440dbb6ccb8c30c4e84cc Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 2 Nov 2007 16:19:59 -0700 Subject: kset: remove decl_subsys macro This macro is no longer used. ksets should be created dynamically with a call to kset_create_and_add() not declared statically. Yes, there are 5 remaining static struct kset usages in the kernel tree, but they will be fixed up soon. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/class.c | 11 +++++++++-- include/linux/kobject.h | 6 ------ 2 files changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/base/class.c b/drivers/base/class.c index d8a92c650b43..304f90eb9b00 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -453,8 +453,15 @@ static struct kset_uevent_ops class_uevent_ops = { .uevent = class_uevent, }; -static decl_subsys(class_obj, &class_uevent_ops); - +/* + * DO NOT copy how this is created, kset_create_and_add() should be + * called, but this is a hold-over from the old-way and will be deleted + * entirely soon. + */ +static struct kset class_obj_subsys = { + .kobj = { .k_name = "class_obj", }, + .uevent_ops = &class_uevent_ops, +}; static int class_device_add_attrs(struct class_device * cd) { diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 673623f18464..9da3523e4a65 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -198,12 +198,6 @@ extern struct kobject * kset_find_obj(struct kset *, const char *); #define set_kset_name(str) .kset = { .kobj = { .k_name = str } } -#define decl_subsys(_name,_uevent_ops) \ -struct kset _name##_subsys = { \ - .kobj = { .k_name = __stringify(_name) }, \ - .uevent_ops =_uevent_ops, \ -} - /* The global /sys/kernel/ kset for people to chain off of */ extern struct kset *kernel_kset; /* The global /sys/hypervisor/ kobject for people to chain off of */ -- cgit v1.2.3-59-g8ed1b From 0ff21e46630abce11fdaaffabd72bbd4eed5ac2c Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 6 Nov 2007 10:36:58 -0800 Subject: kobject: convert kernel_kset to be a kobject kernel_kset does not need to be a kset, but a much simpler kobject now that we have kobj_attributes. We also rename kernel_kset to kernel_kobj to catch all users of this symbol with a build error instead of an easy-to-ignore build warning. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- fs/configfs/mount.c | 2 +- fs/debugfs/inode.c | 2 +- fs/dlm/lockspace.c | 2 +- fs/gfs2/locking/dlm/sysfs.c | 2 +- include/linux/kobject.h | 4 ++-- kernel/ksysfs.c | 18 +++++++++--------- kernel/user.c | 2 +- mm/slub.c | 3 +-- security/inode.c | 2 +- 9 files changed, 18 insertions(+), 19 deletions(-) diff --git a/fs/configfs/mount.c b/fs/configfs/mount.c index c4ee7f05de8b..54bf0db0d4b0 100644 --- a/fs/configfs/mount.c +++ b/fs/configfs/mount.c @@ -140,7 +140,7 @@ static int __init configfs_init(void) if (!configfs_dir_cachep) goto out; - config_kobj = kobject_create_and_add("config", &kernel_kset->kobj); + config_kobj = kobject_create_and_add("config", kernel_kobj); if (!config_kobj) { kmem_cache_destroy(configfs_dir_cachep); configfs_dir_cachep = NULL; diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c index 5ce92c3d3b59..97f6381c36c2 100644 --- a/fs/debugfs/inode.c +++ b/fs/debugfs/inode.c @@ -432,7 +432,7 @@ static int __init debugfs_init(void) { int retval; - debug_kobj = kobject_create_and_add("debug", &kernel_kset->kobj); + debug_kobj = kobject_create_and_add("debug", kernel_kobj); if (!debug_kobj) return -EINVAL; diff --git a/fs/dlm/lockspace.c b/fs/dlm/lockspace.c index 0828beb2d35d..e64b0dc664f3 100644 --- a/fs/dlm/lockspace.c +++ b/fs/dlm/lockspace.c @@ -223,7 +223,7 @@ int dlm_lockspace_init(void) INIT_LIST_HEAD(&lslist); spin_lock_init(&lslist_lock); - dlm_kset = kset_create_and_add("dlm", NULL, &kernel_kset->kobj); + dlm_kset = kset_create_and_add("dlm", NULL, kernel_kobj); if (!dlm_kset) { printk(KERN_WARNING "%s: can not create kset\n", __FUNCTION__); return -ENOMEM; diff --git a/fs/gfs2/locking/dlm/sysfs.c b/fs/gfs2/locking/dlm/sysfs.c index 1a92b6f7bc10..e5a4fbf7265f 100644 --- a/fs/gfs2/locking/dlm/sysfs.c +++ b/fs/gfs2/locking/dlm/sysfs.c @@ -219,7 +219,7 @@ void gdlm_kobject_release(struct gdlm_ls *ls) int gdlm_sysfs_init(void) { - gdlm_kset = kset_create_and_add("lock_dlm", NULL, &kernel_kset->kobj); + gdlm_kset = kset_create_and_add("lock_dlm", NULL, kernel_kobj); if (!gdlm_kset) { printk(KERN_WARNING "%s: can not create kset\n", __FUNCTION__); return -ENOMEM; diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 9da3523e4a65..0930efdcc094 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -198,8 +198,8 @@ extern struct kobject * kset_find_obj(struct kset *, const char *); #define set_kset_name(str) .kset = { .kobj = { .k_name = str } } -/* The global /sys/kernel/ kset for people to chain off of */ -extern struct kset *kernel_kset; +/* The global /sys/kernel/ kobject for people to chain off of */ +extern struct kobject *kernel_kobj; /* The global /sys/hypervisor/ kobject for people to chain off of */ extern struct kobject *hypervisor_kobj; /* The global /sys/power/ kset for people to chain off of */ diff --git a/kernel/ksysfs.c b/kernel/ksysfs.c index 45e646585605..1081aff5fb9e 100644 --- a/kernel/ksysfs.c +++ b/kernel/ksysfs.c @@ -101,8 +101,8 @@ static struct bin_attribute notes_attr = { .read = ¬es_read, }; -struct kset *kernel_kset; -EXPORT_SYMBOL_GPL(kernel_kset); +struct kobject *kernel_kobj; +EXPORT_SYMBOL_GPL(kernel_kobj); static struct attribute * kernel_attrs[] = { #if defined(CONFIG_HOTPLUG) && defined(CONFIG_NET) @@ -125,18 +125,18 @@ static int __init ksysfs_init(void) { int error; - kernel_kset = kset_create_and_add("kernel", NULL, NULL); - if (!kernel_kset) { + kernel_kobj = kobject_create_and_add("kernel", NULL); + if (!kernel_kobj) { error = -ENOMEM; goto exit; } - error = sysfs_create_group(&kernel_kset->kobj, &kernel_attr_group); + error = sysfs_create_group(kernel_kobj, &kernel_attr_group); if (error) goto kset_exit; if (notes_size > 0) { notes_attr.size = notes_size; - error = sysfs_create_bin_file(&kernel_kset->kobj, ¬es_attr); + error = sysfs_create_bin_file(kernel_kobj, ¬es_attr); if (error) goto group_exit; } @@ -150,11 +150,11 @@ static int __init ksysfs_init(void) notes_exit: if (notes_size > 0) - sysfs_remove_bin_file(&kernel_kset->kobj, ¬es_attr); + sysfs_remove_bin_file(kernel_kobj, ¬es_attr); group_exit: - sysfs_remove_group(&kernel_kset->kobj, &kernel_attr_group); + sysfs_remove_group(kernel_kobj, &kernel_attr_group); kset_exit: - kset_unregister(kernel_kset); + kobject_unregister(kernel_kobj); exit: return error; } diff --git a/kernel/user.c b/kernel/user.c index 5a106f3fdf05..7f17e6e8fd65 100644 --- a/kernel/user.c +++ b/kernel/user.c @@ -201,7 +201,7 @@ done: */ int __init uids_sysfs_init(void) { - uids_kset = kset_create_and_add("uids", NULL, &kernel_kset->kobj); + uids_kset = kset_create_and_add("uids", NULL, kernel_kobj); if (!uids_kset) return -ENOMEM; diff --git a/mm/slub.c b/mm/slub.c index b6c79462157e..d26177fb293b 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -4091,8 +4091,7 @@ static int __init slab_sysfs_init(void) struct kmem_cache *s; int err; - slab_kset = kset_create_and_add("slab", &slab_uevent_ops, - &kernel_kset->kobj); + slab_kset = kset_create_and_add("slab", &slab_uevent_ops, kernel_kobj); if (!slab_kset) { printk(KERN_ERR "Cannot register slab subsystem.\n"); return -ENOSYS; diff --git a/security/inode.c b/security/inode.c index dbe040ac0549..def0cc1b07f2 100644 --- a/security/inode.c +++ b/security/inode.c @@ -321,7 +321,7 @@ static int __init securityfs_init(void) { int retval; - security_kobj = kobject_create_and_add("security", &kernel_kset->kobj); + security_kobj = kobject_create_and_add("security", kernel_kobj); if (!security_kobj) return -EINVAL; -- cgit v1.2.3-59-g8ed1b From 2fb9113b974c3c7c43e76647bd5077238e274e1c Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 6 Nov 2007 15:03:30 -0800 Subject: kobject: remove subsystem_(un)register functions These functions are no longer used and are the last remants of the old subsystem crap. So delete them for good. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/bus.c | 6 +++--- drivers/base/class.c | 4 ++-- include/linux/kobject.h | 3 --- lib/kobject.c | 13 ------------- 4 files changed, 5 insertions(+), 21 deletions(-) diff --git a/drivers/base/bus.c b/drivers/base/bus.c index 6796d3e46053..871607b7c876 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -854,7 +854,7 @@ int bus_register(struct bus_type * bus) bus->subsys.kobj.kset = bus_kset; bus->subsys.kobj.ktype = &bus_ktype; - retval = subsystem_register(&bus->subsys); + retval = kset_register(&bus->subsys); if (retval) goto out; @@ -900,7 +900,7 @@ bus_drivers_fail: bus_devices_fail: bus_remove_file(bus, &bus_attr_uevent); bus_uevent_fail: - subsystem_unregister(&bus->subsys); + kset_unregister(&bus->subsys); out: return retval; } @@ -920,7 +920,7 @@ void bus_unregister(struct bus_type * bus) kset_unregister(bus->drivers_kset); kset_unregister(bus->devices_kset); bus_remove_file(bus, &bus_attr_uevent); - subsystem_unregister(&bus->subsys); + kset_unregister(&bus->subsys); } int bus_register_notifier(struct bus_type *bus, struct notifier_block *nb) diff --git a/drivers/base/class.c b/drivers/base/class.c index 304f90eb9b00..3ffcda753e78 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -152,7 +152,7 @@ int class_register(struct class * cls) cls->subsys.kobj.kset = class_kset; cls->subsys.kobj.ktype = &class_ktype; - error = subsystem_register(&cls->subsys); + error = kset_register(&cls->subsys); if (!error) { error = add_class_attrs(class_get(cls)); class_put(cls); @@ -164,7 +164,7 @@ void class_unregister(struct class * cls) { pr_debug("device class '%s': unregistering\n", cls->name); remove_class_attrs(cls); - subsystem_unregister(&cls->subsys); + kset_unregister(&cls->subsys); } static void class_create_release(struct class *cls) diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 0930efdcc094..78c851b4e67e 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -207,9 +207,6 @@ extern struct kset *power_kset; /* The global /sys/firmware/ kobject for people to chain off of */ extern struct kobject *firmware_kobj; -extern int __must_check subsystem_register(struct kset *); -extern void subsystem_unregister(struct kset *); - #if defined(CONFIG_HOTPLUG) int kobject_uevent(struct kobject *kobj, enum kobject_action action); int kobject_uevent_env(struct kobject *kobj, enum kobject_action action, diff --git a/lib/kobject.c b/lib/kobject.c index c742ac25228a..7919c32a3a15 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -800,16 +800,6 @@ struct kobject * kset_find_obj(struct kset * kset, const char * name) return ret; } -int subsystem_register(struct kset *s) -{ - return kset_register(s); -} - -void subsystem_unregister(struct kset *s) -{ - kset_unregister(s); -} - static void kset_release(struct kobject *kobj) { struct kset *kset = container_of(kobj, struct kset, kobj); @@ -904,6 +894,3 @@ EXPORT_SYMBOL(kobject_del); EXPORT_SYMBOL(kset_register); EXPORT_SYMBOL(kset_unregister); - -EXPORT_SYMBOL(subsystem_register); -EXPORT_SYMBOL(subsystem_unregister); -- cgit v1.2.3-59-g8ed1b From f55842f2329f4b3a3a6bb98b005bca3cc851d38a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 6 Nov 2007 15:03:30 -0800 Subject: kobject: clean up rpadlpar horrid sysfs abuse rpadlpar pci hotplug driver was doing some pretty bad stuff with the sysfs files. This cleans up the logic to be sane and gets rid of the gratuitous kset that is not needed for a simple directory like this. Note, this patch is not even build tested, let alone run-time tested. Someone with access to this hardware and can test would be greatly appreciated. Cc: Kay Sievers Cc: John Rose Cc: Badari Pulavarty Cc: Kamalesh Babulal Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/rpadlpar_sysfs.c | 112 ++++++++++++++--------------------- 1 file changed, 43 insertions(+), 69 deletions(-) diff --git a/drivers/pci/hotplug/rpadlpar_sysfs.c b/drivers/pci/hotplug/rpadlpar_sysfs.c index 5c3ddb60a002..9cde367915b6 100644 --- a/drivers/pci/hotplug/rpadlpar_sysfs.c +++ b/drivers/pci/hotplug/rpadlpar_sysfs.c @@ -23,44 +23,13 @@ #define MAX_DRC_NAME_LEN 64 -/* Store return code of dlpar operation in attribute struct */ -struct dlpar_io_attr { - int rc; - struct attribute attr; - ssize_t (*store)(struct dlpar_io_attr *dlpar_attr, const char *buf, - size_t nbytes); -}; -/* Common show callback for all attrs, display the return code - * of the dlpar op */ -static ssize_t -dlpar_attr_show(struct kobject * kobj, struct attribute * attr, char * buf) -{ - struct dlpar_io_attr *dlpar_attr = container_of(attr, - struct dlpar_io_attr, attr); - return sprintf(buf, "%d\n", dlpar_attr->rc); -} - -static ssize_t -dlpar_attr_store(struct kobject * kobj, struct attribute * attr, - const char *buf, size_t nbytes) -{ - struct dlpar_io_attr *dlpar_attr = container_of(attr, - struct dlpar_io_attr, attr); - return dlpar_attr->store ? - dlpar_attr->store(dlpar_attr, buf, nbytes) : -EIO; -} - -static struct sysfs_ops dlpar_attr_sysfs_ops = { - .show = dlpar_attr_show, - .store = dlpar_attr_store, -}; - -static ssize_t add_slot_store(struct dlpar_io_attr *dlpar_attr, - const char *buf, size_t nbytes) +static ssize_t add_slot_store(struct kobject *kobj, struct kobj_attribute *attr, + const char *buf, size_t nbytes) { char drc_name[MAX_DRC_NAME_LEN]; char *end; + int rc; if (nbytes >= MAX_DRC_NAME_LEN) return 0; @@ -72,15 +41,25 @@ static ssize_t add_slot_store(struct dlpar_io_attr *dlpar_attr, end = &drc_name[nbytes]; *end = '\0'; - dlpar_attr->rc = dlpar_add_slot(drc_name); + rc = dlpar_add_slot(drc_name); + if (rc) + return rc; return nbytes; } -static ssize_t remove_slot_store(struct dlpar_io_attr *dlpar_attr, - const char *buf, size_t nbytes) +static ssize_t add_slot_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + return sprintf(buf, "0\n"); +} + +static ssize_t remove_slot_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t nbytes) { char drc_name[MAX_DRC_NAME_LEN]; + int rc; char *end; if (nbytes >= MAX_DRC_NAME_LEN) @@ -93,22 +72,24 @@ static ssize_t remove_slot_store(struct dlpar_io_attr *dlpar_attr, end = &drc_name[nbytes]; *end = '\0'; - dlpar_attr->rc = dlpar_remove_slot(drc_name); + rc = dlpar_remove_slot(drc_name); + if (rc) + return rc; return nbytes; } -static struct dlpar_io_attr add_slot_attr = { - .rc = 0, - .attr = { .name = ADD_SLOT_ATTR_NAME, .mode = 0644, }, - .store = add_slot_store, -}; +static ssize_t remove_slot_show(struct kobject *kobj, + struct kobj_attribute *attr, char *buf) +{ + return sprintf(buf, "0\n"); +} -static struct dlpar_io_attr remove_slot_attr = { - .rc = 0, - .attr = { .name = REMOVE_SLOT_ATTR_NAME, .mode = 0644}, - .store = remove_slot_store, -}; +static struct kobj_attribute add_slot_attr = + __ATTR(ADD_SLOT_ATTR_NAME, 0644, add_slot_show, add_slot_store); + +static struct kobj_attribute remove_slot_attr = + __ATTR(REMOVE_SLOT_ATTR_NAME, 0644, remove_slot_show, remove_slot_store); static struct attribute *default_attrs[] = { &add_slot_attr.attr, @@ -116,36 +97,29 @@ static struct attribute *default_attrs[] = { NULL, }; -static void dlpar_io_release(struct kobject *kobj) -{ - /* noop */ - return; -} - -struct kobj_type ktype_dlpar_io = { - .release = dlpar_io_release, - .sysfs_ops = &dlpar_attr_sysfs_ops, - .default_attrs = default_attrs, +static struct attribute_group dlpar_attr_group = { + .attrs = default_attrs, }; -struct kset dlpar_io_kset = { - .kobj = {.ktype = &ktype_dlpar_io, - .parent = &pci_hotplug_slots_kset->kobj}, -}; +static struct kobject *dlpar_kobj; int dlpar_sysfs_init(void) { - kobject_set_name(&dlpar_io_kset.kobj, DLPAR_KOBJ_NAME); - if (kset_register(&dlpar_io_kset)) { - printk(KERN_ERR "rpadlpar_io: cannot register kset for %s\n", - kobject_name(&dlpar_io_kset.kobj)); + int error; + + dlpar_kobj = kobject_create_and_add(DLPAR_KOBJ_NAME, + &pci_hotplug_slots_kset->kobj); + if (!dlpar_kobj) return -EINVAL; - } - return 0; + error = sysfs_create_group(dlpar_kobj, &dlpar_attr_group); + if (error) + kobject_unregister(dlpar_kobj); + return error; } void dlpar_sysfs_exit(void) { - kset_unregister(&dlpar_io_kset); + sysfs_remove_group(dlpar_kobj, &dlpar_attr_group); + kobject_unregister(dlpar_kobj); } -- cgit v1.2.3-59-g8ed1b From 6e90aa972dda8ef86155eefcdbdc8d34165b9f39 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 6 Nov 2007 15:08:08 -0800 Subject: kobject: convert ecryptfs to use kobject_create Using a kset for this trivial directory is an overkill. Cc: Kay Sievers Cc: Mike Halcrow Cc: Phillip Hellewell Signed-off-by: Greg Kroah-Hartman --- fs/ecryptfs/main.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c index d984eac9a7f5..4f1332107bbd 100644 --- a/fs/ecryptfs/main.c +++ b/fs/ecryptfs/main.c @@ -734,7 +734,7 @@ static int ecryptfs_init_kmem_caches(void) return 0; } -static struct kset *ecryptfs_kset; +static struct kobject *ecryptfs_kobj; static ssize_t version_show(struct kobject *kobj, struct kobj_attribute *attr, char *buff) @@ -757,17 +757,17 @@ static int do_sysfs_registration(void) { int rc; - ecryptfs_kset = kset_create_and_add("ecryptfs", NULL, fs_kobj); - if (!ecryptfs_kset) { + ecryptfs_kobj = kobject_create_and_add("ecryptfs", fs_kobj); + if (!ecryptfs_kobj) { printk(KERN_ERR "Unable to create ecryptfs kset\n"); rc = -ENOMEM; goto out; } - rc = sysfs_create_group(&ecryptfs_kset->kobj, &attr_group); + rc = sysfs_create_group(ecryptfs_kobj, &attr_group); if (rc) { printk(KERN_ERR "Unable to create ecryptfs version attributes\n"); - kset_unregister(ecryptfs_kset); + kobject_unregister(ecryptfs_kobj); } out: return rc; @@ -775,8 +775,8 @@ out: static void do_sysfs_unregistration(void) { - sysfs_remove_group(&ecryptfs_kset->kobj, &attr_group); - kset_unregister(ecryptfs_kset); + sysfs_remove_group(ecryptfs_kobj, &attr_group); + kobject_unregister(ecryptfs_kobj); } static int __init ecryptfs_init(void) -- cgit v1.2.3-59-g8ed1b From bc87d2fe7a1190f1c257af8a91fc490b1ee35954 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 7 Nov 2007 13:56:19 -0800 Subject: kobject: convert efivars to use kobject_create Using a kset for this simple directory is an overkill. Cc: Kay Sievers Cc: Matt Domsch Cc: Matt Tolentino Signed-off-by: Greg Kroah-Hartman --- drivers/firmware/efivars.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c index d1ad48190afc..7f9f086106cc 100644 --- a/drivers/firmware/efivars.c +++ b/drivers/firmware/efivars.c @@ -573,7 +573,7 @@ static struct attribute_group efi_subsys_attr_group = { static struct kset *vars_kset; -static struct kset *efi_kset; +static struct kobject *efi_kobj; /* * efivar_create_sysfs_entry() @@ -665,17 +665,15 @@ efivars_init(void) printk(KERN_INFO "EFI Variables Facility v%s %s\n", EFIVARS_VERSION, EFIVARS_DATE); - /* - * For now we'll register the efi subsys within this driver - */ - efi_kset = kset_create_and_add("efi", NULL, firmware_kobj); - if (!efi_kset) { + /* For now we'll register the efi directory at /sys/firmware/efi */ + efi_kobj = kobject_create_and_add("efi", firmware_kobj); + if (!efi_kobj) { printk(KERN_ERR "efivars: Firmware registration failed.\n"); error = -ENOMEM; goto out_free; } - vars_kset = kset_create_and_add("vars", NULL, &efi_kset->kobj); + vars_kset = kset_create_and_add("vars", NULL, efi_kobj); if (!vars_kset) { printk(KERN_ERR "efivars: Subsystem registration failed.\n"); error = -ENOMEM; @@ -725,7 +723,7 @@ efivars_init(void) " due to error %d\n", error); /* Don't forget the systab entry */ - error = sysfs_create_group(&efi_kset->kobj, &efi_subsys_attr_group); + error = sysfs_create_group(efi_kobj, &efi_subsys_attr_group); if (error) printk(KERN_ERR "efivars: Sysfs attribute export failed with error %d.\n", error); else @@ -734,7 +732,7 @@ efivars_init(void) kset_unregister(vars_kset); out_firmware_unregister: - kset_unregister(efi_kset); + kobject_unregister(efi_kobj); out_free: kfree(variable_name); @@ -755,7 +753,7 @@ efivars_exit(void) } kset_unregister(vars_kset); - kset_unregister(efi_kset); + kobject_unregister(efi_kobj); } module_init(efivars_init); -- cgit v1.2.3-59-g8ed1b From c829a5b49858a83cc7bb5e1e730796575f5bb261 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 7 Nov 2007 13:56:19 -0800 Subject: kobject: convert parisc/pdc_stable to use kobject_create Using a kset for this simple directory is an overkill. Cc: Kay Sievers Cc: Thibaut VARENE Cc: Matthew Wilcox Cc: Grant Grundler Cc: Kyle McMartin Signed-off-by: Greg Kroah-Hartman --- drivers/parisc/pdc_stable.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c index ef1a353e5540..880b10b8a311 100644 --- a/drivers/parisc/pdc_stable.c +++ b/drivers/parisc/pdc_stable.c @@ -960,7 +960,7 @@ static struct attribute_group pdcs_attr_group = { .attrs = pdcs_subsys_attrs, }; -static struct kset *stable_kset; +static struct kobject *stable_kobj; static struct kset *paths_kset; /** @@ -1058,18 +1058,18 @@ pdc_stable_init(void) /* the actual result is 16 bits away */ pdcs_osid = (u16)(result >> 16); - /* For now we'll register the stable kset within this driver */ - stable_kset = kset_create_and_add("stable", NULL, firmware_kobj); - if (!stable_kset) { + /* For now we'll register the directory at /sys/firmware/stable */ + stable_kobj = kobject_create_and_add("stable", firmware_kobj); + if (!stable_kobj) { rc = -ENOMEM; goto fail_firmreg; } /* Don't forget the root entries */ - error = sysfs_create_group(&stable_kset->kobj, pdcs_attr_group); + error = sysfs_create_group(stable_kobj, pdcs_attr_group); /* register the paths kset as a child of the stable kset */ - paths_kset = kset_create_and_add("paths", NULL, &stable_kset->kobj); + paths_kset = kset_create_and_add("paths", NULL, stable_kobj); if (!paths_kset) { rc = -ENOMEM; goto fail_ksetreg; @@ -1086,7 +1086,7 @@ fail_pdcsreg: kset_unregister(paths_kset); fail_ksetreg: - kset_unregister(stable_kset); + kobject_unregister(stable_kobj); fail_firmreg: printk(KERN_INFO PDCS_PREFIX " bailing out\n"); @@ -1098,7 +1098,7 @@ pdc_stable_exit(void) { pdcs_unregister_pathentries(); kset_unregister(paths_kset); - kset_unregister(stable_kset); + kobject_unregister(stable_kobj); } -- cgit v1.2.3-59-g8ed1b From 822a89ed1ea0f7a2d8079307426fbeeac0370138 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 20 Nov 2007 13:56:21 -0800 Subject: driver core: clean up shutdown.c shutdown.c had some stuff it did not need, including a duplicate extern in the power.h file. This cleans up all of that. Signed-off-by: Greg Kroah-Hartman --- drivers/base/power/power.h | 7 ------- drivers/base/power/shutdown.c | 5 ----- 2 files changed, 12 deletions(-) diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h index 10c20840395e..6f0dfca8ebdd 100644 --- a/drivers/base/power/power.h +++ b/drivers/base/power/power.h @@ -1,10 +1,3 @@ -/* - * shutdown.c - */ - -extern void device_shutdown(void); - - #ifdef CONFIG_PM_SLEEP /* diff --git a/drivers/base/power/shutdown.c b/drivers/base/power/shutdown.c index f51cbc1d402c..5b6bc168ffba 100644 --- a/drivers/base/power/shutdown.c +++ b/drivers/base/power/shutdown.c @@ -12,10 +12,6 @@ #include #include "../base.h" -#include "power.h" - -#define to_dev(node) container_of(node, struct device, kobj.entry) - /** * We handle system devices differently - we suspend and shut them @@ -45,4 +41,3 @@ void device_shutdown(void) } } } - -- cgit v1.2.3-59-g8ed1b From 37b0c020343080241984d978981d6caf877b278a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 26 Nov 2007 22:11:55 -0800 Subject: driver core: clean up device_shutdown device_shutdown does not need to be in a separate file. Move it into the driver core file where it belongs. This also moves us one more step closer to making devices_kset static, now only the crazy sysdevs are keeping that from happening... Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 20 +++++++++++++++++++- drivers/base/power/Makefile | 1 - drivers/base/power/shutdown.c | 43 ------------------------------------------- 3 files changed, 19 insertions(+), 45 deletions(-) delete mode 100644 drivers/base/power/shutdown.c diff --git a/drivers/base/core.c b/drivers/base/core.c index d2de2d59af42..b3a931fe6b16 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1415,5 +1415,23 @@ out: put_device(dev); return error; } - EXPORT_SYMBOL_GPL(device_move); + +/** + * device_shutdown - call ->shutdown() on each device to shutdown. + */ +void device_shutdown(void) +{ + struct device * dev, *devn; + + list_for_each_entry_safe_reverse(dev, devn, &devices_kset->list, + kobj.entry) { + if (dev->bus && dev->bus->shutdown) { + dev_dbg(dev, "shutdown\n"); + dev->bus->shutdown(dev); + } else if (dev->driver && dev->driver->shutdown) { + dev_dbg(dev, "shutdown\n"); + dev->driver->shutdown(dev); + } + } +} diff --git a/drivers/base/power/Makefile b/drivers/base/power/Makefile index 44504e6618fb..06a86fe6a78d 100644 --- a/drivers/base/power/Makefile +++ b/drivers/base/power/Makefile @@ -1,4 +1,3 @@ -obj-y := shutdown.o obj-$(CONFIG_PM) += sysfs.o obj-$(CONFIG_PM_SLEEP) += main.o obj-$(CONFIG_PM_TRACE) += trace.o diff --git a/drivers/base/power/shutdown.c b/drivers/base/power/shutdown.c deleted file mode 100644 index 5b6bc168ffba..000000000000 --- a/drivers/base/power/shutdown.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * shutdown.c - power management functions for the device tree. - * - * Copyright (c) 2002-3 Patrick Mochel - * 2002-3 Open Source Development Lab - * - * This file is released under the GPLv2 - * - */ - -#include -#include - -#include "../base.h" - -/** - * We handle system devices differently - we suspend and shut them - * down last and resume them first. That way, we don't do anything stupid like - * shutting down the interrupt controller before any devices.. - * - * Note that there are not different stages for power management calls - - * they only get one called once when interrupts are disabled. - */ - - -/** - * device_shutdown - call ->shutdown() on each device to shutdown. - */ -void device_shutdown(void) -{ - struct device * dev, *devn; - - list_for_each_entry_safe_reverse(dev, devn, &devices_kset->list, - kobj.entry) { - if (dev->bus && dev->bus->shutdown) { - dev_dbg(dev, "shutdown\n"); - dev->bus->shutdown(dev); - } else if (dev->driver && dev->driver->shutdown) { - dev_dbg(dev, "shutdown\n"); - dev->driver->shutdown(dev); - } - } -} -- cgit v1.2.3-59-g8ed1b From d76e15fb20eeb7632ef38876a884fe3508b2c01d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 27 Nov 2007 11:28:26 -0800 Subject: driver core: make /sys/power a kobject /sys/power should not be a kset, that's overkill. This patch renames it to power_kset and fixes up all usages of it in the tree. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- arch/arm/mach-omap1/pm.c | 2 +- arch/powerpc/platforms/pseries/power.c | 10 +++++----- include/linux/kobject.h | 4 ++-- kernel/power/disk.c | 2 +- kernel/power/main.c | 8 ++++---- 5 files changed, 13 insertions(+), 13 deletions(-) diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 63edafb59490..d9805e3d9304 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -719,7 +719,7 @@ static int __init omap_pm_init(void) omap_pm_init_proc(); #endif - error = sysfs_create_file(&power_kset->kobj, &sleep_while_idle_attr); + error = sysfs_create_file(power_kobj, &sleep_while_idle_attr); if (error) printk(KERN_ERR "sysfs_create_file failed: %d\n", error); diff --git a/arch/powerpc/platforms/pseries/power.c b/arch/powerpc/platforms/pseries/power.c index 90706cf840fd..e95fc1594c84 100644 --- a/arch/powerpc/platforms/pseries/power.c +++ b/arch/powerpc/platforms/pseries/power.c @@ -53,7 +53,7 @@ static struct kobj_attribute auto_poweron_attr = __ATTR(auto_poweron, 0644, auto_poweron_show, auto_poweron_store); #ifndef CONFIG_PM -struct kset *power_kset; +struct kobject *power_kobj; static struct attribute *g[] = { &auto_poweron_attr.attr, @@ -66,16 +66,16 @@ static struct attribute_group attr_group = { static int __init pm_init(void) { - power_kset = kset_create_and_add("power", NULL, NULL); - if (!power_kset) + power_kobj = kobject_create_and_add("power", NULL); + if (!power_kobj) return -ENOMEM; - return sysfs_create_group(&power_kset->kobj, &attr_group); + return sysfs_create_group(power_kobj, &attr_group); } core_initcall(pm_init); #else static int __init apo_pm_init(void) { - return (sysfs_create_file(&power_kset->kobj, &auto_poweron_attr)); + return (sysfs_create_file(power_kobj, &auto_poweron_attr)); } __initcall(apo_pm_init); #endif diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 78c851b4e67e..bb6868475edb 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -202,8 +202,8 @@ extern struct kobject * kset_find_obj(struct kset *, const char *); extern struct kobject *kernel_kobj; /* The global /sys/hypervisor/ kobject for people to chain off of */ extern struct kobject *hypervisor_kobj; -/* The global /sys/power/ kset for people to chain off of */ -extern struct kset *power_kset; +/* The global /sys/power/ kobject for people to chain off of */ +extern struct kobject *power_kobj; /* The global /sys/firmware/ kobject for people to chain off of */ extern struct kobject *firmware_kobj; diff --git a/kernel/power/disk.c b/kernel/power/disk.c index ef5aa2ca0ab0..b138b431e271 100644 --- a/kernel/power/disk.c +++ b/kernel/power/disk.c @@ -714,7 +714,7 @@ static struct attribute_group attr_group = { static int __init pm_disk_init(void) { - return sysfs_create_group(&power_kset->kobj, &attr_group); + return sysfs_create_group(power_kobj, &attr_group); } core_initcall(pm_disk_init); diff --git a/kernel/power/main.c b/kernel/power/main.c index b8139493b856..efc08360e627 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -276,7 +276,7 @@ EXPORT_SYMBOL(pm_suspend); #endif /* CONFIG_SUSPEND */ -struct kset *power_kset; +struct kobject *power_kobj; /** * state - control system power state. @@ -389,10 +389,10 @@ static struct attribute_group attr_group = { static int __init pm_init(void) { - power_kset = kset_create_and_add("power", NULL, NULL); - if (!power_kset) + power_kobj = kobject_create_and_add("power", NULL); + if (!power_kobj) return -ENOMEM; - return sysfs_create_group(&power_kset->kobj, &attr_group); + return sysfs_create_group(power_kobj, &attr_group); } core_initcall(pm_init); -- cgit v1.2.3-59-g8ed1b From cfb36fff45e3997b8044c81045fc4869ba5f281a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 28 Nov 2007 10:46:22 -0800 Subject: kobject: grab the kset reference in kobject_add, not kobject_init kobject_init should not be grabing any references, but only initializing the object. This patch fixes this, and makes the lock hold-time shorter for when a kset is present in the kobject. The current kernel tree has been audited to verify that this change should be safe. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- lib/kobject.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/lib/kobject.c b/lib/kobject.c index 7919c32a3a15..4d52b6f534bc 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -133,7 +133,6 @@ void kobject_init(struct kobject * kobj) return; kref_init(&kobj->kref); INIT_LIST_HEAD(&kobj->entry); - kobj->kset = kset_get(kobj->kset); } @@ -184,7 +183,7 @@ int kobject_add(struct kobject * kobj) kobj->kset ? kobject_name(&kobj->kset->kobj) : "" ); if (kobj->kset) { - spin_lock(&kobj->kset->list_lock); + kobj->kset = kset_get(kobj->kset); if (!parent) { parent = kobject_get(&kobj->kset->kobj); @@ -196,7 +195,8 @@ int kobject_add(struct kobject * kobj) kobject_get(parent); } - list_add_tail(&kobj->entry,&kobj->kset->list); + spin_lock(&kobj->kset->list_lock); + list_add_tail(&kobj->entry, &kobj->kset->list); spin_unlock(&kobj->kset->list_lock); kobj->parent = parent; } -- cgit v1.2.3-59-g8ed1b From 9f66fa2a4690a16da0dbaae2f44ddfc313802504 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 28 Nov 2007 23:49:41 -0800 Subject: kobject: clean up debugging messages The kobject debugging messages are a mess. This provides a unified message that makes them actually useful. The format for new kobject debug messages should be: kobject: 'KOBJECT_NAME' (ADDRESS): FUNCTION_NAME: message.\n Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- lib/kobject.c | 23 +++++++++++++++-------- lib/kobject_uevent.c | 20 ++++++++++++++------ 2 files changed, 29 insertions(+), 14 deletions(-) diff --git a/lib/kobject.c b/lib/kobject.c index 4d52b6f534bc..1015f74212d0 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -95,7 +95,8 @@ static void fill_kobj_path(struct kobject *kobj, char *path, int length) *(path + --length) = '/'; } - pr_debug("%s: path = '%s'\n",__FUNCTION__,path); + pr_debug("kobject: '%s' (%p): %s: path = '%s'\n", kobject_name(kobj), + kobj, __FUNCTION__,path); } /** @@ -171,15 +172,17 @@ int kobject_add(struct kobject * kobj) if (!kobj->k_name) kobject_set_name(kobj, "NO_NAME"); if (!*kobj->k_name) { - pr_debug("kobject attempted to be registered with no name!\n"); + pr_debug("kobject (%p) attempted to be registered with no " + "name!\n", kobj); WARN_ON(1); kobject_put(kobj); return -EINVAL; } parent = kobject_get(kobj->parent); - pr_debug("kobject %s: registering. parent: %s, set: %s\n", - kobject_name(kobj), parent ? kobject_name(parent) : "", + pr_debug("kobject: '%s' (%p): %s: parent: '%s', set: '%s'\n", + kobject_name(kobj), kobj, __FUNCTION__, + parent ? kobject_name(parent) : "", kobj->kset ? kobject_name(&kobj->kset->kobj) : "" ); if (kobj->kset) { @@ -560,7 +563,8 @@ void kobject_unregister(struct kobject * kobj) { if (!kobj) return; - pr_debug("kobject %s: unregistering\n",kobject_name(kobj)); + pr_debug("kobject: '%s' (%p): %s\n", + kobject_name(kobj), kobj, __FUNCTION__); kobject_uevent(kobj, KOBJ_REMOVE); kobject_del(kobj); kobject_put(kobj); @@ -589,7 +593,8 @@ static void kobject_cleanup(struct kobject *kobj) struct kobject * parent = kobj->parent; const char *name = kobj->k_name; - pr_debug("kobject %s: cleaning up\n",kobject_name(kobj)); + pr_debug("kobject: '%s' (%p): %s\n", + kobject_name(kobj), kobj, __FUNCTION__); if (t && t->release) { t->release(kobj); /* If we have a release function, we can guess that this was @@ -621,7 +626,8 @@ void kobject_put(struct kobject * kobj) static void dynamic_kobj_release(struct kobject *kobj) { - pr_debug("%s: freeing %s\n", __FUNCTION__, kobject_name(kobj)); + pr_debug("kobject: '%s' (%p): %s\n", + kobject_name(kobj), kobj, __FUNCTION__); kfree(kobj); } @@ -803,7 +809,8 @@ struct kobject * kset_find_obj(struct kset * kset, const char * name) static void kset_release(struct kobject *kobj) { struct kset *kset = container_of(kobj, struct kset, kobj); - pr_debug("kset %s: now freed\n", kobject_name(kobj)); + pr_debug("kobject: '%s' (%p): %s\n", + kobject_name(kobj), kobj, __FUNCTION__); kfree(kset); } diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c index 5886147252d0..51dc4d287add 100644 --- a/lib/kobject_uevent.c +++ b/lib/kobject_uevent.c @@ -98,7 +98,8 @@ int kobject_uevent_env(struct kobject *kobj, enum kobject_action action, int i = 0; int retval = 0; - pr_debug("%s\n", __FUNCTION__); + pr_debug("kobject: '%s' (%p): %s\n", + kobject_name(kobj), kobj, __FUNCTION__); /* search the kset we belong to */ top_kobj = kobj; @@ -106,7 +107,9 @@ int kobject_uevent_env(struct kobject *kobj, enum kobject_action action, top_kobj = top_kobj->parent; if (!top_kobj->kset) { - pr_debug("kobject attempted to send uevent without kset!\n"); + pr_debug("kobject: '%s' (%p): %s: attempted to send uevent " + "without kset!\n", kobject_name(kobj), kobj, + __FUNCTION__); return -EINVAL; } @@ -116,7 +119,9 @@ int kobject_uevent_env(struct kobject *kobj, enum kobject_action action, /* skip the event, if the filter returns zero. */ if (uevent_ops && uevent_ops->filter) if (!uevent_ops->filter(kset, kobj)) { - pr_debug("kobject filter function caused the event to drop!\n"); + pr_debug("kobject: '%s' (%p): %s: filter function " + "caused the event to drop!\n", + kobject_name(kobj), kobj, __FUNCTION__); return 0; } @@ -126,7 +131,9 @@ int kobject_uevent_env(struct kobject *kobj, enum kobject_action action, else subsystem = kobject_name(&kset->kobj); if (!subsystem) { - pr_debug("unset subsystem caused the event to drop!\n"); + pr_debug("kobject: '%s' (%p): %s: unset subsystem caused the " + "event to drop!\n", kobject_name(kobj), kobj, + __FUNCTION__); return 0; } @@ -166,8 +173,9 @@ int kobject_uevent_env(struct kobject *kobj, enum kobject_action action, if (uevent_ops && uevent_ops->uevent) { retval = uevent_ops->uevent(kset, kobj, env); if (retval) { - pr_debug ("%s - uevent() returned %d\n", - __FUNCTION__, retval); + pr_debug("kobject: '%s' (%p): %s: uevent() returned " + "%d\n", kobject_name(kobj), kobj, + __FUNCTION__, retval); goto exit; } } -- cgit v1.2.3-59-g8ed1b From 81e7c6a636c81d9eeaeaa732bfbace44535fab00 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 4 Dec 2007 22:41:54 +0000 Subject: UIO: fix kobject usage The uio kobject code is "wierd". This patch should hopefully fix it up to be sane and not leak memory anymore. Cc: Kay Sievers Cc: Thomas Gleixner Cc: Benedikt Spranger Signed-off-by: Hans J. Koch Signed-off-by: Greg Kroah-Hartman --- drivers/uio/uio.c | 91 ++++++++++++++++++++++++---------------------- include/linux/uio_driver.h | 6 ++- 2 files changed, 52 insertions(+), 45 deletions(-) diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c index 606aae7490ab..acc387de988f 100644 --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -34,7 +34,7 @@ struct uio_device { wait_queue_head_t wait; int vma_count; struct uio_info *info; - struct kset map_attr_kset; + struct kobject *map_dir; }; static int uio_major; @@ -51,47 +51,48 @@ static struct uio_class { * attributes */ -static struct attribute attr_addr = { - .name = "addr", - .mode = S_IRUGO, +struct uio_map { + struct kobject kobj; + struct uio_mem *mem; }; +#define to_map(map) container_of(map, struct uio_map, kobj) -static struct attribute attr_size = { - .name = "size", - .mode = S_IRUGO, -}; -static struct attribute* map_attrs[] = { - &attr_addr, &attr_size, NULL -}; - -static ssize_t map_attr_show(struct kobject *kobj, struct attribute *attr, +static ssize_t map_attr_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf) { - struct uio_mem *mem = container_of(kobj, struct uio_mem, kobj); + struct uio_map *map = to_map(kobj); + struct uio_mem *mem = map->mem; - if (strncmp(attr->name,"addr",4) == 0) + if (strncmp(attr->attr.name, "addr", 4) == 0) return sprintf(buf, "0x%lx\n", mem->addr); - if (strncmp(attr->name,"size",4) == 0) + if (strncmp(attr->attr.name, "size", 4) == 0) return sprintf(buf, "0x%lx\n", mem->size); return -ENODEV; } -static void map_attr_release(struct kobject *kobj) -{ - /* TODO ??? */ -} +static struct kobj_attribute attr_attribute = + __ATTR(addr, S_IRUGO, map_attr_show, NULL); +static struct kobj_attribute size_attribute = + __ATTR(size, S_IRUGO, map_attr_show, NULL); -static struct sysfs_ops map_attr_ops = { - .show = map_attr_show, +static struct attribute *attrs[] = { + &attr_attribute.attr, + &size_attribute.attr, + NULL, /* need to NULL terminate the list of attributes */ }; +static void map_release(struct kobject *kobj) +{ + struct uio_map *map = to_map(kobj); + kfree(map); +} + static struct kobj_type map_attr_type = { - .release = map_attr_release, - .sysfs_ops = &map_attr_ops, - .default_attrs = map_attrs, + .release = map_release, + .default_attrs = attrs, }; static ssize_t show_name(struct device *dev, @@ -148,6 +149,7 @@ static int uio_dev_add_attributes(struct uio_device *idev) int mi; int map_found = 0; struct uio_mem *mem; + struct uio_map *map; ret = sysfs_create_group(&idev->dev->kobj, &uio_attr_grp); if (ret) @@ -159,31 +161,34 @@ static int uio_dev_add_attributes(struct uio_device *idev) break; if (!map_found) { map_found = 1; - kobject_set_name(&idev->map_attr_kset.kobj,"maps"); - idev->map_attr_kset.kobj.ktype = &map_attr_type; - idev->map_attr_kset.kobj.parent = &idev->dev->kobj; - ret = kset_register(&idev->map_attr_kset); - if (ret) - goto err_remove_group; + idev->map_dir = kobject_create_and_add("maps", + &idev->dev->kobj); + if (!idev->map_dir) + goto err; } - kobject_init(&mem->kobj); - kobject_set_name(&mem->kobj,"map%d",mi); - mem->kobj.parent = &idev->map_attr_kset.kobj; - mem->kobj.kset = &idev->map_attr_kset; - ret = kobject_add(&mem->kobj); + map = kzalloc(sizeof(*map), GFP_KERNEL); + if (!map) + goto err; + kobject_init_ng(&map->kobj, &map_attr_type); + map->mem = mem; + mem->map = map; + ret = kobject_add_ng(&map->kobj, idev->map_dir, "map%d", mi); + if (ret) + goto err; + ret = kobject_uevent(&map->kobj, KOBJ_ADD); if (ret) - goto err_remove_maps; + goto err; } return 0; -err_remove_maps: +err: for (mi--; mi>=0; mi--) { mem = &idev->info->mem[mi]; - kobject_unregister(&mem->kobj); + map = mem->map; + kobject_unregister(&map->kobj); } - kset_unregister(&idev->map_attr_kset); /* Needed ? */ -err_remove_group: + kobject_unregister(idev->map_dir); sysfs_remove_group(&idev->dev->kobj, &uio_attr_grp); err_group: dev_err(idev->dev, "error creating sysfs files (%d)\n", ret); @@ -198,9 +203,9 @@ static void uio_dev_del_attributes(struct uio_device *idev) mem = &idev->info->mem[mi]; if (mem->size == 0) break; - kobject_unregister(&mem->kobj); + kobject_unregister(&mem->map->kobj); } - kset_unregister(&idev->map_attr_kset); + kobject_unregister(idev->map_dir); sysfs_remove_group(&idev->dev->kobj, &uio_attr_grp); } diff --git a/include/linux/uio_driver.h b/include/linux/uio_driver.h index 44c28e94df50..973386d439da 100644 --- a/include/linux/uio_driver.h +++ b/include/linux/uio_driver.h @@ -18,20 +18,22 @@ #include #include +struct uio_map; + /** * struct uio_mem - description of a UIO memory region - * @kobj: kobject for this mapping * @addr: address of the device's memory * @size: size of IO * @memtype: type of memory addr points to * @internal_addr: ioremap-ped version of addr, for driver internal use + * @map: for use by the UIO core only. */ struct uio_mem { - struct kobject kobj; unsigned long addr; unsigned long size; int memtype; void __iomem *internal_addr; + struct uio_map *map; }; #define MAX_UIO_MAPS 5 -- cgit v1.2.3-59-g8ed1b From 43b98c4a66760d18d4056beed4078a8dbad193cc Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 15:54:39 -0400 Subject: Kobject: change net/bridge to use kobject_create_and_add The kobject in the bridge code is only used for registering with sysfs, not for any lifespan rules. This patch changes it to be only a pointer and use the simpler api for this kind of thing. Cc: Stephen Hemminger Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- net/bridge/br_if.c | 2 +- net/bridge/br_private.h | 2 +- net/bridge/br_sysfs_br.c | 14 ++++---------- net/bridge/br_sysfs_if.c | 2 +- 4 files changed, 7 insertions(+), 13 deletions(-) diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c index 935784f736b3..dadec949d4fe 100644 --- a/net/bridge/br_if.c +++ b/net/bridge/br_if.c @@ -133,7 +133,7 @@ static void del_nbp(struct net_bridge_port *p) struct net_bridge *br = p->br; struct net_device *dev = p->dev; - sysfs_remove_link(&br->ifobj, dev->name); + sysfs_remove_link(br->ifobj, dev->name); dev_set_promiscuity(dev, -1); diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index f666f7b28ff5..c11b554fd109 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -124,7 +124,7 @@ struct net_bridge struct timer_list tcn_timer; struct timer_list topology_change_timer; struct timer_list gc_timer; - struct kobject ifobj; + struct kobject *ifobj; }; extern struct notifier_block br_device_notifier; diff --git a/net/bridge/br_sysfs_br.c b/net/bridge/br_sysfs_br.c index 3312e8f2abe4..4e7f91fafedd 100644 --- a/net/bridge/br_sysfs_br.c +++ b/net/bridge/br_sysfs_br.c @@ -426,16 +426,10 @@ int br_sysfs_addbr(struct net_device *dev) goto out2; } - - kobject_set_name(&br->ifobj, SYSFS_BRIDGE_PORT_SUBDIR); - br->ifobj.ktype = NULL; - br->ifobj.kset = NULL; - br->ifobj.parent = brobj; - - err = kobject_register(&br->ifobj); - if (err) { + br->ifobj = kobject_create_and_add(SYSFS_BRIDGE_PORT_SUBDIR, brobj); + if (!br->ifobj) { pr_info("%s: can't add kobject (directory) %s/%s\n", - __FUNCTION__, dev->name, kobject_name(&br->ifobj)); + __FUNCTION__, dev->name, SYSFS_BRIDGE_PORT_SUBDIR); goto out3; } return 0; @@ -453,7 +447,7 @@ void br_sysfs_delbr(struct net_device *dev) struct kobject *kobj = &dev->dev.kobj; struct net_bridge *br = netdev_priv(dev); - kobject_unregister(&br->ifobj); + kobject_unregister(br->ifobj); sysfs_remove_bin_file(kobj, &bridge_forward); sysfs_remove_group(kobj, &bridge_group); } diff --git a/net/bridge/br_sysfs_if.c b/net/bridge/br_sysfs_if.c index 79db51fcb476..02b2d50cce4d 100644 --- a/net/bridge/br_sysfs_if.c +++ b/net/bridge/br_sysfs_if.c @@ -229,7 +229,7 @@ int br_sysfs_addif(struct net_bridge_port *p) goto out2; } - err= sysfs_create_link(&br->ifobj, &p->kobj, p->dev->name); + err = sysfs_create_link(br->ifobj, &p->kobj, p->dev->name); out2: return err; } -- cgit v1.2.3-59-g8ed1b From 901195ed7f4b2f30dc5a36271887939c5d7bfb9f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 15:54:39 -0400 Subject: Kobject: change GFS2 to use kobject_init_and_add Stop using kobject_register, as this way we can control the sending of the uevent properly, after everything is properly initialized. Cc: Steven Whitehouse Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- fs/dlm/lockspace.c | 26 ++++---------------------- fs/gfs2/locking/dlm/sysfs.c | 13 +++---------- fs/gfs2/sys.c | 10 +++------- 3 files changed, 10 insertions(+), 39 deletions(-) diff --git a/fs/dlm/lockspace.c b/fs/dlm/lockspace.c index e64b0dc664f3..b750f13d0328 100644 --- a/fs/dlm/lockspace.c +++ b/fs/dlm/lockspace.c @@ -168,23 +168,6 @@ static struct kobj_type dlm_ktype = { static struct kset *dlm_kset; -static int kobject_setup(struct dlm_ls *ls) -{ - char lsname[DLM_LOCKSPACE_LEN]; - int error; - - memset(lsname, 0, DLM_LOCKSPACE_LEN); - snprintf(lsname, DLM_LOCKSPACE_LEN, "%s", ls->ls_name); - - error = kobject_set_name(&ls->ls_kobj, "%s", lsname); - if (error) - return error; - - ls->ls_kobj.kset = dlm_kset; - ls->ls_kobj.ktype = &dlm_ktype; - return 0; -} - static int do_uevent(struct dlm_ls *ls, int in) { int error; @@ -545,13 +528,12 @@ static int new_lockspace(char *name, int namelen, void **lockspace, goto out_delist; } - error = kobject_setup(ls); - if (error) - goto out_stop; - - error = kobject_register(&ls->ls_kobj); + ls->ls_kobj.kset = dlm_kset; + error = kobject_init_and_add(&ls->ls_kobj, &dlm_ktype, NULL, + "%s", ls->ls_name); if (error) goto out_stop; + kobject_uevent(&ls->ls_kobj, KOBJ_ADD); /* let kobject handle freeing of ls if there's an error */ do_unreg = 1; diff --git a/fs/gfs2/locking/dlm/sysfs.c b/fs/gfs2/locking/dlm/sysfs.c index e5a4fbf7265f..a7336b909c61 100644 --- a/fs/gfs2/locking/dlm/sysfs.c +++ b/fs/gfs2/locking/dlm/sysfs.c @@ -195,19 +195,12 @@ int gdlm_kobject_setup(struct gdlm_ls *ls, struct kobject *fskobj) { int error; - error = kobject_set_name(&ls->kobj, "%s", "lock_module"); - if (error) { - log_error("can't set kobj name %d", error); - return error; - } - ls->kobj.kset = gdlm_kset; - ls->kobj.ktype = &gdlm_ktype; - ls->kobj.parent = fskobj; - - error = kobject_register(&ls->kobj); + error = kobject_init_and_add(&ls->kobj, &gdlm_ktype, fskobj, + "lock_module"); if (error) log_error("can't register kobj %d", error); + kobject_uevent(&ls->kobj, KOBJ_ADD); return error; } diff --git a/fs/gfs2/sys.c b/fs/gfs2/sys.c index 44cfaae92e76..8d9cd5bd5845 100644 --- a/fs/gfs2/sys.c +++ b/fs/gfs2/sys.c @@ -494,13 +494,8 @@ int gfs2_sys_fs_add(struct gfs2_sbd *sdp) int error; sdp->sd_kobj.kset = gfs2_kset; - sdp->sd_kobj.ktype = &gfs2_ktype; - - error = kobject_set_name(&sdp->sd_kobj, "%s", sdp->sd_table_name); - if (error) - goto fail; - - error = kobject_register(&sdp->sd_kobj); + error = kobject_init_and_add(&sdp->sd_kobj, &gfs2_ktype, NULL, + "%s", sdp->sd_table_name); if (error) goto fail; @@ -520,6 +515,7 @@ int gfs2_sys_fs_add(struct gfs2_sbd *sdp) if (error) goto fail_args; + kobject_uevent(&sdp->sd_kobj, KOBJ_ADD); return 0; fail_args: -- cgit v1.2.3-59-g8ed1b From 35be0681983752116a8161ad3b30e830963108a4 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 15:54:39 -0400 Subject: Kobject: change drivers/infiniband to use kobject_init_and_add Stop using kobject_register, as this way we can control the sending of the uevent properly, after everything is properly initialized. Cc: Roland Dreier Cc: Sean Hefty Cc: Hal Rosenstock Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/infiniband/core/sysfs.c | 35 +++++++++-------------------------- include/rdma/ib_verbs.h | 2 +- 2 files changed, 10 insertions(+), 27 deletions(-) diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c index 3d4050681325..aa81129704cf 100644 --- a/drivers/infiniband/core/sysfs.c +++ b/drivers/infiniband/core/sysfs.c @@ -508,19 +508,10 @@ static int add_port(struct ib_device *device, int port_num) p->ibdev = device; p->port_num = port_num; - p->kobj.ktype = &port_type; - p->kobj.parent = kobject_get(&device->ports_parent); - if (!p->kobj.parent) { - ret = -EBUSY; - goto err; - } - - ret = kobject_set_name(&p->kobj, "%d", port_num); - if (ret) - goto err_put; - - ret = kobject_register(&p->kobj); + ret = kobject_init_and_add(&p->kobj, &port_type, + kobject_get(device->ports_parent), + "%d", port_num); if (ret) goto err_put; @@ -549,6 +540,7 @@ static int add_port(struct ib_device *device, int port_num) list_add_tail(&p->kobj.entry, &device->port_list); + kobject_uevent(&p->kobj, KOBJ_ADD); return 0; err_free_pkey: @@ -570,9 +562,7 @@ err_remove_pma: sysfs_remove_group(&p->kobj, &pma_group); err_put: - kobject_put(&device->ports_parent); - -err: + kobject_put(device->ports_parent); kfree(p); return ret; } @@ -694,16 +684,9 @@ int ib_device_register_sysfs(struct ib_device *device) goto err_unregister; } - device->ports_parent.parent = kobject_get(&class_dev->kobj); - if (!device->ports_parent.parent) { - ret = -EBUSY; - goto err_unregister; - } - ret = kobject_set_name(&device->ports_parent, "ports"); - if (ret) - goto err_put; - ret = kobject_register(&device->ports_parent); - if (ret) + device->ports_parent = kobject_create_and_add("ports", + kobject_get(&class_dev->kobj)); + if (!device->ports_parent) goto err_put; if (device->node_type == RDMA_NODE_IB_SWITCH) { @@ -758,7 +741,7 @@ void ib_device_unregister_sysfs(struct ib_device *device) kobject_unregister(p); } - kobject_unregister(&device->ports_parent); + kobject_unregister(device->ports_parent); class_device_unregister(&device->class_dev); } diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h index 11f39606e7d9..cfbd38fe2998 100644 --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -1026,7 +1026,7 @@ struct ib_device { struct module *owner; struct class_device class_dev; - struct kobject ports_parent; + struct kobject *ports_parent; struct list_head port_list; enum { -- cgit v1.2.3-59-g8ed1b From dd002e807486f9858147c073069a37ba625baad8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 15:54:39 -0400 Subject: Kobject: change drivers/firmware/edd.c to use kobject_init_and_add Stop using kobject_register, as this way we can control the sending of the uevent properly, after everything is properly initialized. Cc: Matt Domsch Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/firmware/edd.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c index ddcc95793068..dc0b87b13505 100644 --- a/drivers/firmware/edd.c +++ b/drivers/firmware/edd.c @@ -721,13 +721,13 @@ edd_device_register(struct edd_device *edev, int i) if (!edev) return 1; edd_dev_set_info(edev, i); - kobject_set_name(&edev->kobj, "int13_dev%02x", - 0x80 + i); edev->kobj.kset = edd_kset; - edev->kobj.ktype = &edd_ktype; - error = kobject_register(&edev->kobj); - if (!error) + error = kobject_init_and_add(&edev->kobj, &edd_ktype, NULL, + "int13_dev%02x", 0x80 + i); + if (!error) { edd_populate_dir(edev); + kobject_uevent(&edev->kobj, KOBJ_ADD); + } return error; } -- cgit v1.2.3-59-g8ed1b From d6d292c451e0ffe715fff36dc3a1129868258fa3 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 15:54:39 -0400 Subject: Kobject: change drivers/firmware/efivars.c to use kobject_init_and_add Stop using kobject_register, as this way we can control the sending of the uevent properly, after everything is properly initialized. Cc: Matt Domsch Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/firmware/efivars.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c index 7f9f086106cc..b61a72fb6219 100644 --- a/drivers/firmware/efivars.c +++ b/drivers/firmware/efivars.c @@ -617,16 +617,16 @@ efivar_create_sysfs_entry(unsigned long variable_name_size, *(short_name + strlen(short_name)) = '-'; efi_guid_unparse(vendor_guid, short_name + strlen(short_name)); - kobject_set_name(&new_efivar->kobj, "%s", short_name); new_efivar->kobj.kset = vars_kset; - new_efivar->kobj.ktype = &efivar_ktype; - i = kobject_register(&new_efivar->kobj); + i = kobject_init_and_add(&new_efivar->kobj, &efivar_ktype, NULL, + "%s", short_name); if (i) { kfree(short_name); kfree(new_efivar); return 1; } + kobject_uevent(&new_efivar->kobj, KOBJ_ADD); kfree(short_name); short_name = NULL; -- cgit v1.2.3-59-g8ed1b From 038c5b3e412b0b751cb4b1507506bad3c7ffefae Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 15:54:39 -0400 Subject: Kobject: change drivers/cpufreq/cpufreq.c to use kobject_init_and_add Stop using kobject_register, as this way we can control the sending of the uevent properly, after everything is properly initialized. Cc: Dominik Brodowski Cc: Ashok Raj Cc: Jacob Shin Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/cpufreq/cpufreq.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 79581fab82d6..9e102af0c07b 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -828,11 +828,8 @@ static int cpufreq_add_dev (struct sys_device * sys_dev) memcpy(&new_policy, policy, sizeof(struct cpufreq_policy)); /* prepare interface data */ - policy->kobj.parent = &sys_dev->kobj; - policy->kobj.ktype = &ktype_cpufreq; - kobject_set_name(&policy->kobj, "cpufreq"); - - ret = kobject_register(&policy->kobj); + ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, &sys_dev->kobj, + "cpufreq"); if (ret) { unlock_policy_rwsem_write(cpu); goto err_out_driver_exit; @@ -902,6 +899,7 @@ static int cpufreq_add_dev (struct sys_device * sys_dev) goto err_out_unregister; } + kobject_uevent(&policy->kobj, KOBJ_ADD); module_put(cpufreq_driver->owner); dprintk("initialization complete\n"); cpufreq_debug_enable_ratelimit(); -- cgit v1.2.3-59-g8ed1b From b2ed215a3338b8b16187be8d136153054118a41e Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 15:54:39 -0400 Subject: Kobject: change drivers/edac to use kobject_init_and_add Stop using kobject_register, as this way we can control the sending of the uevent properly, after everything is properly initialized. Acked-by: Doug Thompson Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/edac/edac_device_sysfs.c | 39 ++++++++++++--------------------------- drivers/edac/edac_mc_sysfs.c | 28 +++++++++------------------- drivers/edac/edac_pci_sysfs.c | 29 ++++++++--------------------- 3 files changed, 29 insertions(+), 67 deletions(-) diff --git a/drivers/edac/edac_device_sysfs.c b/drivers/edac/edac_device_sysfs.c index 70b837f23c43..10e5b19a3e3b 100644 --- a/drivers/edac/edac_device_sysfs.c +++ b/drivers/edac/edac_device_sysfs.c @@ -246,16 +246,6 @@ int edac_device_register_sysfs_main_kobj(struct edac_device_ctl_info *edac_dev) /* Init the devices's kobject */ memset(&edac_dev->kobj, 0, sizeof(struct kobject)); - edac_dev->kobj.ktype = &ktype_device_ctrl; - - /* set this new device under the edac_class kobject */ - edac_dev->kobj.parent = &edac_class->kset.kobj; - - /* generate sysfs "..../edac/" */ - debugf4("%s() set name of kobject to: %s\n", __func__, edac_dev->name); - err = kobject_set_name(&edac_dev->kobj, "%s", edac_dev->name); - if (err) - goto err_out; /* Record which module 'owns' this control structure * and bump the ref count of the module @@ -268,12 +258,15 @@ int edac_device_register_sysfs_main_kobj(struct edac_device_ctl_info *edac_dev) } /* register */ - err = kobject_register(&edac_dev->kobj); + err = kobject_init_and_add(&edac_dev->kobj, &ktype_device_ctrl, + &edac_class->kset.kobj, + "%s", edac_dev->name); if (err) { debugf1("%s()Failed to register '.../edac/%s'\n", __func__, edac_dev->name); goto err_kobj_reg; } + kobject_uevent(&edac_dev->kobj, KOBJ_ADD); /* At this point, to 'free' the control struct, * edac_device_unregister_sysfs_main_kobj() must be used @@ -533,12 +526,6 @@ static int edac_device_create_block(struct edac_device_ctl_info *edac_dev, /* init this block's kobject */ memset(&block->kobj, 0, sizeof(struct kobject)); - block->kobj.parent = &instance->kobj; - block->kobj.ktype = &ktype_block_ctrl; - - err = kobject_set_name(&block->kobj, "%s", block->name); - if (err) - return err; /* bump the main kobject's reference count for this controller * and this instance is dependant on the main @@ -550,7 +537,9 @@ static int edac_device_create_block(struct edac_device_ctl_info *edac_dev, } /* Add this block's kobject */ - err = kobject_register(&block->kobj); + err = kobject_init_and_add(&block->kobj, &ktype_block_ctrl, + &instance->kobj, + "%s", block->name); if (err) { debugf1("%s() Failed to register instance '%s'\n", __func__, block->name); @@ -579,6 +568,7 @@ static int edac_device_create_block(struct edac_device_ctl_info *edac_dev, goto err_on_attrib; } } + kobject_uevent(&block->kobj, KOBJ_ADD); return 0; @@ -637,15 +627,8 @@ static int edac_device_create_instance(struct edac_device_ctl_info *edac_dev, /* Init the instance's kobject */ memset(&instance->kobj, 0, sizeof(struct kobject)); - /* set this new device under the edac_device main kobject */ - instance->kobj.parent = &edac_dev->kobj; - instance->kobj.ktype = &ktype_instance_ctrl; instance->ctl = edac_dev; - err = kobject_set_name(&instance->kobj, "%s", instance->name); - if (err) - goto err_out; - /* bump the main kobject's reference count for this controller * and this instance is dependant on the main */ @@ -655,8 +638,9 @@ static int edac_device_create_instance(struct edac_device_ctl_info *edac_dev, goto err_out; } - /* Formally register this instance's kobject */ - err = kobject_register(&instance->kobj); + /* Formally register this instance's kobject under the edac_device */ + err = kobject_init_and_add(&instance->kobj, &ktype_instance_ctrl, + &edac_dev->kobj, "%s", instance->name); if (err != 0) { debugf2("%s() Failed to register instance '%s'\n", __func__, instance->name); @@ -679,6 +663,7 @@ static int edac_device_create_instance(struct edac_device_ctl_info *edac_dev, goto err_release_instance_kobj; } } + kobject_uevent(&instance->kobj, KOBJ_ADD); debugf4("%s() Registered instance %d '%s' kobject\n", __func__, idx, instance->name); diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c index 905fcd73c26e..45b1d3633418 100644 --- a/drivers/edac/edac_mc_sysfs.c +++ b/drivers/edac/edac_mc_sysfs.c @@ -380,13 +380,6 @@ static int edac_create_csrow_object(struct mem_ctl_info *mci, /* generate ..../edac/mc/mc/csrow */ memset(&csrow->kobj, 0, sizeof(csrow->kobj)); csrow->mci = mci; /* include container up link */ - csrow->kobj.parent = kobj_mci; - csrow->kobj.ktype = &ktype_csrow; - - /* name this instance of csrow */ - err = kobject_set_name(&csrow->kobj, "csrow%d", index); - if (err) - goto err_out; /* bump the mci instance's kobject's ref count */ kobj = kobject_get(&mci->edac_mci_kobj); @@ -396,7 +389,8 @@ static int edac_create_csrow_object(struct mem_ctl_info *mci, } /* Instanstiate the csrow object */ - err = kobject_register(&csrow->kobj); + err = kobject_init_and_add(&csrow->kobj, &ktype_csrow, kobj_mci, + "csrow%d", index); if (err) goto err_release_top_kobj; @@ -416,7 +410,7 @@ static int edac_create_csrow_object(struct mem_ctl_info *mci, goto err_out; } } - + kobject_uevent(&csrow->kobj, KOBJ_ADD); return 0; /* error unwind stack */ @@ -764,15 +758,6 @@ int edac_mc_register_sysfs_main_kobj(struct mem_ctl_info *mci) /* Init the mci's kobject */ memset(kobj_mci, 0, sizeof(*kobj_mci)); - /* this instance become part of the mc_kset */ - kobj_mci->kset = &mc_kset; - kobj_mci->ktype = &ktype_mci; - - /* set the name of the mc object */ - err = kobject_set_name(kobj_mci, "mc%d", mci->mc_idx); - if (err) - goto fail_out; - /* Record which module 'owns' this control structure * and bump the ref count of the module */ @@ -784,13 +769,18 @@ int edac_mc_register_sysfs_main_kobj(struct mem_ctl_info *mci) goto fail_out; } + /* this instance become part of the mc_kset */ + kobj_mci->kset = &mc_kset; + /* register the mc kobject to the mc_kset */ - err = kobject_register(kobj_mci); + err = kobject_init_and_add(kobj_mci, &ktype_mci, NULL, + "mc%d", mci->mc_idx); if (err) { debugf1("%s()Failed to register '.../edac/mc%d'\n", __func__, mci->mc_idx); goto kobj_reg_fail; } + kobject_uevent(kobj_mci, KOBJ_ADD); /* At this point, to 'free' the control struct, * edac_mc_unregister_sysfs_main_kobj() must be used diff --git a/drivers/edac/edac_pci_sysfs.c b/drivers/edac/edac_pci_sysfs.c index 69f5dddabddf..834eaa9d6148 100644 --- a/drivers/edac/edac_pci_sysfs.c +++ b/drivers/edac/edac_pci_sysfs.c @@ -162,14 +162,6 @@ static int edac_pci_create_instance_kobj(struct edac_pci_ctl_info *pci, int idx) debugf0("%s()\n", __func__); - /* Set the parent and the instance's ktype */ - pci->kobj.parent = &edac_pci_top_main_kobj; - pci->kobj.ktype = &ktype_pci_instance; - - err = kobject_set_name(&pci->kobj, "pci%d", idx); - if (err) - return err; - /* First bump the ref count on the top main kobj, which will * track the number of PCI instances we have, and thus nest * properly on keeping the module loaded @@ -181,7 +173,8 @@ static int edac_pci_create_instance_kobj(struct edac_pci_ctl_info *pci, int idx) } /* And now register this new kobject under the main kobj */ - err = kobject_register(&pci->kobj); + err = kobject_init_and_add(&pci->kobj, &ktype_pci_instance, + &edac_pci_top_main_kobj, "pci%d", idx); if (err != 0) { debugf2("%s() failed to register instance pci%d\n", __func__, idx); @@ -189,6 +182,7 @@ static int edac_pci_create_instance_kobj(struct edac_pci_ctl_info *pci, int idx) goto error_out; } + kobject_uevent(&pci->kobj, KOBJ_ADD); debugf1("%s() Register instance 'pci%d' kobject\n", __func__, idx); return 0; @@ -364,14 +358,6 @@ int edac_pci_main_kobj_setup(void) goto decrement_count_fail; } - /* Need the kobject hook ups, and name setting */ - edac_pci_top_main_kobj.ktype = &ktype_edac_pci_main_kobj; - edac_pci_top_main_kobj.parent = &edac_class->kset.kobj; - - err = kobject_set_name(&edac_pci_top_main_kobj, "pci"); - if (err) - goto decrement_count_fail; - /* Bump the reference count on this module to ensure the * modules isn't unloaded until we deconstruct the top * level main kobj for EDAC PCI @@ -383,23 +369,24 @@ int edac_pci_main_kobj_setup(void) } /* Instanstiate the pci object */ - /* FIXME: maybe new sysdev_create_subdir() */ - err = kobject_register(&edac_pci_top_main_kobj); + err = kobject_init_and_add(&edac_pci_top_main_kobj, &ktype_edac_pci_main_kobj, + &edac_class->kset.kobj, "pci"); if (err) { debugf1("Failed to register '.../edac/pci'\n"); - goto kobject_register_fail; + goto kobject_init_and_add_fail; } /* At this point, to 'release' the top level kobject * for EDAC PCI, then edac_pci_main_kobj_teardown() * must be used, for resources to be cleaned up properly */ + kobject_uevent(&edac_pci_top_main_kobj, KOBJ_ADD); debugf1("Registered '.../edac/pci' kobject\n"); return 0; /* Error unwind statck */ -kobject_register_fail: +kobject_init_and_add_fail: module_put(THIS_MODULE); decrement_count_fail: -- cgit v1.2.3-59-g8ed1b From 94f57f33680922197581b127b3badde7ef658258 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 15:54:39 -0400 Subject: Kobject: change drivers/cpuidle/sysfs.c to use kobject_init_and_add Stop using kobject_register, as this way we can control the sending of the uevent properly, after everything is properly initialized. Cc: Shaohua Li Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/cpuidle/sysfs.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c index 0f3515e77d4b..059db9c21474 100644 --- a/drivers/cpuidle/sysfs.c +++ b/drivers/cpuidle/sysfs.c @@ -300,14 +300,13 @@ int cpuidle_add_state_sysfs(struct cpuidle_device *device) kobj->state = &device->states[i]; init_completion(&kobj->kobj_unregister); - kobj->kobj.parent = &device->kobj; - kobj->kobj.ktype = &ktype_state_cpuidle; - kobject_set_name(&kobj->kobj, "state%d", i); - ret = kobject_register(&kobj->kobj); + ret = kobject_init_and_add(&kobj->kobj, &ktype_state_cpuidle, &device->kobj, + "state%d", i); if (ret) { kfree(kobj); goto error_state; } + kobject_uevent(&kobj->kobj, KOBJ_ADD); device->kobjs[i] = kobj; } @@ -339,12 +338,14 @@ int cpuidle_add_sysfs(struct sys_device *sysdev) { int cpu = sysdev->id; struct cpuidle_device *dev; + int error; dev = per_cpu(cpuidle_devices, cpu); - dev->kobj.parent = &sysdev->kobj; - dev->kobj.ktype = &ktype_cpuidle; - kobject_set_name(&dev->kobj, "%s", "cpuidle"); - return kobject_register(&dev->kobj); + error = kobject_init_and_add(&dev->kobj, &ktype_cpuidle, &sysdev->kobj, + "cpuidle"); + if (!error) + kobject_uevent(&dev->kobj, KOBJ_ADD); + return error; } /** -- cgit v1.2.3-59-g8ed1b From 64dbcac3a16d0d22045b2c80d7f208196575486a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 15:54:39 -0400 Subject: Kobject: change drivers/pci/hotplug/pci_hotplug_core.c to use kobject_init_and_add Stop using kobject_register, as this way we can control the sending of the uevent properly, after everything is properly initialized. Cc: Kristen Carlson Accardi Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/pci_hotplug_core.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index 175e0c8599e3..0f05e6a68b3b 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -630,19 +630,19 @@ int pci_hp_register (struct hotplug_slot *slot) return -EINVAL; } - kobject_set_name(&slot->kobj, "%s", slot->name); - slot->kobj.kset = pci_hotplug_slots_kset; - slot->kobj.ktype = &hotplug_slot_ktype; - /* this can fail if we have already registered a slot with the same name */ - if (kobject_register(&slot->kobj)) { - err("Unable to register kobject"); + slot->kobj.kset = pci_hotplug_slots_kset; + result = kobject_init_and_add(&slot->kobj, &hotplug_slot_ktype, NULL, + "%s", slot->name); + if (result) { + err("Unable to register kobject '%s'", slot->name); return -EINVAL; } - + list_add (&slot->slot_list, &pci_hotplug_slot_list); result = fs_add_slot (slot); + kobject_uevent(&slot->kobj, KOBJ_ADD); dbg ("Added slot %s to the list\n", slot->name); return result; } -- cgit v1.2.3-59-g8ed1b From 61030bfb79148b12b661580c8e3c2adfe1d9fc9e Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 15:54:39 -0400 Subject: Kobject: change drivers/base/sys.c to use kobject_init_and_add Stop using kobject_register, as this way we can control the sending of the uevent properly, after everything is properly initialized. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/sys.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) diff --git a/drivers/base/sys.c b/drivers/base/sys.c index 29eadc656bd1..47fc6eb6473f 100644 --- a/drivers/base/sys.c +++ b/drivers/base/sys.c @@ -224,20 +224,15 @@ int sysdev_register(struct sys_device * sysdev) if (!cls) return -EINVAL; + pr_debug("Registering sys device '%s'\n", kobject_name(&sysdev->kobj)); + /* Make sure the kset is set */ sysdev->kobj.kset = &cls->kset; - /* But make sure we point to the right type for sysfs translation */ - sysdev->kobj.ktype = &ktype_sysdev; - error = kobject_set_name(&sysdev->kobj, "%s%d", - kobject_name(&cls->kset.kobj), sysdev->id); - if (error) - return error; - - pr_debug("Registering sys device '%s'\n", kobject_name(&sysdev->kobj)); - /* Register the object */ - error = kobject_register(&sysdev->kobj); + error = kobject_init_and_add(&sysdev->kobj, &ktype_sysdev, NULL, + "%s%d", kobject_name(&cls->kset.kobj), + sysdev->id); if (!error) { struct sysdev_driver * drv; @@ -254,6 +249,7 @@ int sysdev_register(struct sys_device * sysdev) } mutex_unlock(&sysdev_drivers_lock); } + kobject_uevent(&sysdev->kobj, KOBJ_ADD); return error; } -- cgit v1.2.3-59-g8ed1b From 5b3f355d8fef95901505e924818b3031092453c2 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 15:54:39 -0400 Subject: Kobject: change arch/x86/kernel/cpu/intel_cacheinfo.c to use kobject_init_and_add Stop using kobject_register, as this way we can control the sending of the uevent properly, after everything is properly initialized. Cc: Ashok Raj Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- arch/x86/kernel/cpu/intel_cacheinfo.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 9f530ff43c21..3509542eed87 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -733,10 +733,8 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev) if (unlikely(retval < 0)) return retval; - cache_kobject[cpu]->parent = &sys_dev->kobj; - kobject_set_name(cache_kobject[cpu], "%s", "cache"); - cache_kobject[cpu]->ktype = &ktype_percpu_entry; - retval = kobject_register(cache_kobject[cpu]); + retval = kobject_init_and_add(cache_kobject[cpu], &ktype_percpu_entry, + &sys_dev->kobj, "%s", "cache"); if (retval < 0) { cpuid4_cache_sysfs_exit(cpu); return retval; @@ -746,10 +744,9 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev) this_object = INDEX_KOBJECT_PTR(cpu,i); this_object->cpu = cpu; this_object->index = i; - this_object->kobj.parent = cache_kobject[cpu]; - kobject_set_name(&(this_object->kobj), "index%1lu", i); - this_object->kobj.ktype = &ktype_cache; - retval = kobject_register(&(this_object->kobj)); + retval = kobject_init_and_add(&(this_object->kobj), + &ktype_cache, cache_kobject[cpu], + "index%1lu", i); if (unlikely(retval)) { for (j = 0; j < i; j++) { kobject_unregister( @@ -759,10 +756,12 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev) cpuid4_cache_sysfs_exit(cpu); break; } + kobject_uevent(&(this_object->kobj), KOBJ_ADD); } if (!retval) cpu_set(cpu, cache_dev_map); + kobject_uevent(cache_kobject[cpu], KOBJ_ADD); return retval; } -- cgit v1.2.3-59-g8ed1b From a77aa28a2db3d134dd387f0f05cd6b6717fb1d28 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 15:54:39 -0400 Subject: Kobject: change drivers/acpi/system.c to use kobject_create_and_add Stop using kobject_register for this static kobject, as it's overkill. This way is much simpler. Cc: Len Brown Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/acpi/system.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c index c22b93aab7fe..5ffe0ea18967 100644 --- a/drivers/acpi/system.c +++ b/drivers/acpi/system.c @@ -58,7 +58,7 @@ module_param_call(acpica_version, NULL, param_get_acpica_version, NULL, 0444); FS Interface (/sys) -------------------------------------------------------------------------- */ static LIST_HEAD(acpi_table_attr_list); -static struct kobject tables_kobj; +static struct kobject *tables_kobj; struct acpi_table_attr { struct bin_attribute attr; @@ -135,11 +135,9 @@ static int acpi_system_sysfs_init(void) int table_index = 0; int result; - tables_kobj.parent = acpi_kobj; - kobject_set_name(&tables_kobj, "tables"); - result = kobject_register(&tables_kobj); - if (result) - return result; + tables_kobj = kobject_create_and_add("tables", acpi_kobj); + if (!tables_kobj) + return -ENOMEM; do { result = acpi_get_table_by_index(table_index, &table_header); @@ -153,7 +151,7 @@ static int acpi_system_sysfs_init(void) acpi_table_attr_init(table_attr, table_header); result = - sysfs_create_bin_file(&tables_kobj, + sysfs_create_bin_file(tables_kobj, &table_attr->attr); if (result) { kfree(table_attr); @@ -163,6 +161,7 @@ static int acpi_system_sysfs_init(void) &acpi_table_attr_list); } } while (!result); + kobject_uevent(tables_kobj, KOBJ_ADD); return 0; } -- cgit v1.2.3-59-g8ed1b From 89c426066462263c90957c37af29765855516b83 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 15:54:39 -0400 Subject: Kobject: change drivers/block/pktcdvd.c to use kobject_init_and_add Stop using kobject_register, as this way we can control the sending of the uevent properly, after everything is properly initialized. Cc: Jens Axboe Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/block/pktcdvd.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index 17da6999bef0..d1ee38361e0b 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -110,17 +110,18 @@ static struct pktcdvd_kobj* pkt_kobj_create(struct pktcdvd_device *pd, struct kobj_type* ktype) { struct pktcdvd_kobj *p; + int error; + p = kzalloc(sizeof(*p), GFP_KERNEL); if (!p) return NULL; - kobject_set_name(&p->kobj, "%s", name); - p->kobj.parent = parent; - p->kobj.ktype = ktype; p->pd = pd; - if (kobject_register(&p->kobj) != 0) { + error = kobject_init_and_add(&p->kobj, ktype, parent, "%s", name); + if (error) { kobject_put(&p->kobj); return NULL; } + kobject_uevent(&p->kobj, KOBJ_ADD); return p; } /* -- cgit v1.2.3-59-g8ed1b From d48b335256cd75fcb1a4abb3ce8136d8d9c931cc Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 15:54:39 -0400 Subject: Kobject: change arch/sh/kernel/cpu/sh4/sq.c to use kobject_init_and_add Stop using kobject_register, as this way we can control the sending of the uevent properly, after everything is properly initialized. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- arch/sh/kernel/cpu/sh4/sq.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c index b22a78c807e6..97fd9b9a4820 100644 --- a/arch/sh/kernel/cpu/sh4/sq.c +++ b/arch/sh/kernel/cpu/sh4/sq.c @@ -341,17 +341,18 @@ static int __devinit sq_sysdev_add(struct sys_device *sysdev) { unsigned int cpu = sysdev->id; struct kobject *kobj; + int error; sq_kobject[cpu] = kzalloc(sizeof(struct kobject), GFP_KERNEL); if (unlikely(!sq_kobject[cpu])) return -ENOMEM; kobj = sq_kobject[cpu]; - kobj->parent = &sysdev->kobj; - kobject_set_name(kobj, "%s", "sq"); - kobj->ktype = &ktype_percpu_entry; - - return kobject_register(kobj); + error = kobject_init_and_add(kobj, &ktype_percpu_entry, &sysdev->kobj, + "%s", "sq"); + if (!error) + kobject_uevent(kobj, KOBJ_ADD); + return error; } static int __devexit sq_sysdev_remove(struct sys_device *sysdev) -- cgit v1.2.3-59-g8ed1b From 8dde2a96c146cc0491beec41fe3bf0477a1f15aa Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 15:54:39 -0400 Subject: Kobject: change drivers/net/ibmveth.c to use kobject_init_and_add Stop using kobject_register, as this way we can control the sending of the uevent properly, after everything is properly initialized. Cc: Dave Larson Cc: Santiago Leon Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/net/ibmveth.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c index 7d7758f3ad8c..bee30375999a 100644 --- a/drivers/net/ibmveth.c +++ b/drivers/net/ibmveth.c @@ -1179,13 +1179,15 @@ static int __devinit ibmveth_probe(struct vio_dev *dev, const struct vio_device_ for(i = 0; irx_buff_pool[i].kobj; + int error; + ibmveth_init_buffer_pool(&adapter->rx_buff_pool[i], i, pool_count[i], pool_size[i], pool_active[i]); - kobj->parent = &dev->dev.kobj; - kobject_set_name(kobj, "pool%d", i); - kobj->ktype = &ktype_veth_pool; - kobject_register(kobj); + error = kobject_init_and_add(kobj, &ktype_veth_pool, + &dev->dev.kobj, "pool%d", i); + if (!error) + kobject_uevent(kobj, KOBJ_ADD); } ibmveth_debug_printk("adapter @ 0x%p\n", adapter); -- cgit v1.2.3-59-g8ed1b From 73f368cf679babef42e54f0fe19270040ac9d4d7 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 15:54:39 -0400 Subject: Kobject: change drivers/parisc/pdc_stable.c to use kobject_init_and_add Stop using kobject_register, as this way we can control the sending of the uevent properly, after everything is properly initialized. Cc: Kyle McMartin Cc: Matthew Wilcox Cc: Grant Grundler Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/parisc/pdc_stable.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c index 880b10b8a311..87bc6b73b249 100644 --- a/drivers/parisc/pdc_stable.c +++ b/drivers/parisc/pdc_stable.c @@ -991,13 +991,12 @@ pdcs_register_pathentries(void) if (err < 0) continue; - if ((err = kobject_set_name(&entry->kobj, "%s", entry->name))) - return err; entry->kobj.kset = paths_kset; - entry->kobj.ktype = &ktype_pdcspath; - if ((err = kobject_register(&entry->kobj))) + err = kobject_init_and_add(&entry->kobj, &ktype_pdcspath, NULL, + "%s", entry->name); + if (err) return err; - + /* kobject is now registered */ write_lock(&entry->rw_lock); entry->ready = 2; @@ -1009,6 +1008,7 @@ pdcs_register_pathentries(void) } write_unlock(&entry->rw_lock); + kobject_uevent(&entry->kobj, KOBJ_ADD); } return 0; -- cgit v1.2.3-59-g8ed1b From c199790a8bc90c91b88ad1205dee2955401cff81 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 15:54:39 -0400 Subject: Kobject: change arch/ia64/kernel/topology.c to use kobject_init_and_add Stop using kobject_register, as this way we can control the sending of the uevent properly, after everything is properly initialized. Cc: Tony Luck Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- arch/ia64/kernel/topology.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c index 14261fee5f4d..c4311e3adf55 100644 --- a/arch/ia64/kernel/topology.c +++ b/arch/ia64/kernel/topology.c @@ -354,17 +354,16 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev) if (unlikely(retval < 0)) return retval; - all_cpu_cache_info[cpu].kobj.parent = &sys_dev->kobj; - kobject_set_name(&all_cpu_cache_info[cpu].kobj, "%s", "cache"); - all_cpu_cache_info[cpu].kobj.ktype = &cache_ktype_percpu_entry; - retval = kobject_register(&all_cpu_cache_info[cpu].kobj); + retval = kobject_init_and_add(&all_cpu_cache_info[cpu].kobj, + &cache_ktype_percpu_entry, &sys_dev->kobj, + "%s", "cache"); for (i = 0; i < all_cpu_cache_info[cpu].num_cache_leaves; i++) { this_object = LEAF_KOBJECT_PTR(cpu,i); - this_object->kobj.parent = &all_cpu_cache_info[cpu].kobj; - kobject_set_name(&(this_object->kobj), "index%1lu", i); - this_object->kobj.ktype = &cache_ktype; - retval = kobject_register(&(this_object->kobj)); + retval = kobject_init_and_add(&(this_object->kobj), + &cache_ktype, + &all_cpu_cache_info[cpu].kobj, + "index%1lu", i); if (unlikely(retval)) { for (j = 0; j < i; j++) { kobject_unregister( @@ -374,7 +373,9 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev) cpu_cache_sysfs_exit(cpu); break; } + kobject_uevent(&(this_object->kobj), KOBJ_ADD); } + kobject_uevent(&all_cpu_cache_info[cpu].kobj, KOBJ_ADD); return retval; } -- cgit v1.2.3-59-g8ed1b From 3830c62fef49f8bb1b2f353c7fb9469e3d038f5d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 15:54:39 -0400 Subject: Kobject: change drivers/md/md.c to use kobject_init_and_add Stop using kobject_register, as this way we can control the sending of the uevent properly, after everything is properly initialized. Cc: Neil Brown Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/md/md.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index cef9ebd5a046..c5030863d004 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3054,6 +3054,7 @@ static struct kobject *md_probe(dev_t dev, int *part, void *data) int partitioned = (MAJOR(dev) != MD_MAJOR); int shift = partitioned ? MdpMinorShift : 0; int unit = MINOR(dev) >> shift; + int error; if (!mddev) return NULL; @@ -3082,12 +3083,13 @@ static struct kobject *md_probe(dev_t dev, int *part, void *data) add_disk(disk); mddev->gendisk = disk; mutex_unlock(&disks_mutex); - mddev->kobj.parent = &disk->kobj; - kobject_set_name(&mddev->kobj, "%s", "md"); - mddev->kobj.ktype = &md_ktype; - if (kobject_register(&mddev->kobj)) + error = kobject_init_and_add(&mddev->kobj, &md_ktype, &disk->kobj, + "%s", "md"); + if (error) printk(KERN_WARNING "md: cannot register %s/md - name in use\n", disk->disk_name); + else + kobject_uevent(&mddev->kobj, KOBJ_ADD); return NULL; } -- cgit v1.2.3-59-g8ed1b From a521cf209c6e7042f85b2c5b16da3ffa8004fb7b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 19 Dec 2007 09:23:20 -0800 Subject: Kobject: change arch/x86/kernel/cpu/mcheck/mce_amd_64.c to use kobject_create_and_add Make this kobject dynamic and convert it to not use kobject_register, which is going away. Cc: Jacob Shin Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- arch/x86/kernel/cpu/mcheck/mce_amd_64.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c index 752fb16a817d..2d65311d206e 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c @@ -65,7 +65,7 @@ static struct threshold_block threshold_defaults = { }; struct threshold_bank { - struct kobject kobj; + struct kobject *kobj; struct threshold_block *blocks; cpumask_t cpus; }; @@ -433,7 +433,7 @@ static __cpuinit int allocate_threshold_blocks(unsigned int cpu, per_cpu(threshold_banks, cpu)[bank]->blocks = b; kobject_set_name(&b->kobj, "misc%i", block); - b->kobj.parent = &per_cpu(threshold_banks, cpu)[bank]->kobj; + b->kobj.parent = per_cpu(threshold_banks, cpu)[bank]->kobj; b->kobj.ktype = &threshold_ktype; err = kobject_register(&b->kobj); if (err) @@ -489,7 +489,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) goto out; err = sysfs_create_link(&per_cpu(device_mce, cpu).kobj, - &b->kobj, name); + b->kobj, name); if (err) goto out; @@ -505,16 +505,15 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) goto out; } - kobject_set_name(&b->kobj, "threshold_bank%i", bank); - b->kobj.parent = &per_cpu(device_mce, cpu).kobj; + b->kobj = kobject_create_and_add(name, &per_cpu(device_mce, cpu).kobj); + if (!b->kobj) + goto out_free; + #ifndef CONFIG_SMP b->cpus = CPU_MASK_ALL; #else b->cpus = per_cpu(cpu_core_map, cpu); #endif - err = kobject_register(&b->kobj); - if (err) - goto out_free; per_cpu(threshold_banks, cpu)[bank] = b; @@ -531,7 +530,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) continue; err = sysfs_create_link(&per_cpu(device_mce, i).kobj, - &b->kobj, name); + b->kobj, name); if (err) goto out; @@ -627,7 +626,7 @@ static void threshold_remove_bank(unsigned int cpu, int bank) deallocate_threshold_block(cpu, bank); free_out: - kobject_unregister(&b->kobj); + kobject_unregister(b->kobj); kfree(b); per_cpu(threshold_banks, cpu)[bank] = NULL; } -- cgit v1.2.3-59-g8ed1b From 542eb75a27616bdde95c8d3764e0ab703579f8b5 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 19 Dec 2007 09:23:20 -0800 Subject: Kobject: change arch/x86/kernel/cpu/mcheck/mce_amd_64.c to use kobject_init_and_add Stop using kobject_register, as this way we can control the sending of the uevent properly, after everything is properly initialized. Cc: Jacob Shin Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- arch/x86/kernel/cpu/mcheck/mce_amd_64.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c index 2d65311d206e..ef15f35b10ed 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c @@ -432,10 +432,9 @@ static __cpuinit int allocate_threshold_blocks(unsigned int cpu, else per_cpu(threshold_banks, cpu)[bank]->blocks = b; - kobject_set_name(&b->kobj, "misc%i", block); - b->kobj.parent = per_cpu(threshold_banks, cpu)[bank]->kobj; - b->kobj.ktype = &threshold_ktype; - err = kobject_register(&b->kobj); + err = kobject_init_and_add(&b->kobj, &threshold_ktype, + per_cpu(threshold_banks, cpu)[bank]->kobj, + "misc%i", block); if (err) goto out_free; recurse: @@ -451,6 +450,8 @@ recurse: if (err) goto out_free; + kobject_uevent(&b->kobj, KOBJ_ADD); + return err; out_free: -- cgit v1.2.3-59-g8ed1b From 52840bd628707979b5bbcce3c506786d3a69dba0 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 23:05:35 -0700 Subject: Kobject: the cris iop_fw_load.c code is broken This code is really really really broken. So much so that it's almost impossible to fix with a simple patch, so just comment out the offending registration with the kobject core, and mark the driver as broken. The problem is that the code is trying to register a "raw" struct device, which is not allowed. struct device is only for use within the driver model. This is being done to try to use the firmware layer which wants a struct device. To properly fix this, use something easy, like a platform device, which is a struct device and can be used for this kind of thing. Cc: Mikael Starvik Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- arch/cris/arch-v32/drivers/iop_fw_load.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/cris/arch-v32/drivers/iop_fw_load.c b/arch/cris/arch-v32/drivers/iop_fw_load.c index 11f9895ded50..f4bdc1dfa320 100644 --- a/arch/cris/arch-v32/drivers/iop_fw_load.c +++ b/arch/cris/arch-v32/drivers/iop_fw_load.c @@ -20,6 +20,9 @@ #define IOP_TIMEOUT 100 +#error "This driver is broken with regard to its driver core usage." +#error "Please contact for details on how to fix it properly." + static struct device iop_spu_device[2] = { { .bus_id = "iop-spu0", }, { .bus_id = "iop-spu1", }, @@ -192,6 +195,13 @@ int iop_start_mpu(unsigned int start_addr) static int __init iop_fw_load_init(void) { +#if 0 + /* + * static struct devices can not be added directly to sysfs by ignoring + * the driver model infrastructure. To fix this properly, please use + * the platform_bus to register these devices to be able to properly + * use the firmware infrastructure. + */ device_initialize(&iop_spu_device[0]); kobject_set_name(&iop_spu_device[0].kobj, "iop-spu0"); kobject_add(&iop_spu_device[0].kobj); @@ -201,6 +211,7 @@ static int __init iop_fw_load_init(void) device_initialize(&iop_mpu_device); kobject_set_name(&iop_mpu_device.kobj, "iop-mpu"); kobject_add(&iop_mpu_device.kobj); +#endif return 0; } -- cgit v1.2.3-59-g8ed1b From 60728d62e4d273776e9ef9704f9ff8e8a248a8a1 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 23:05:35 -0700 Subject: Kobject: convert drivers/base/class.c to use kobject_init/add_ng() This converts the code to use the new kobject functions, cleaning up the logic in doing so. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/class.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/drivers/base/class.c b/drivers/base/class.c index 3ffcda753e78..ba6745b0fd2f 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -546,8 +546,7 @@ static struct class_device_attribute class_uevent_attr = void class_device_initialize(struct class_device *class_dev) { class_dev->kobj.kset = &class_obj_subsys; - class_dev->kobj.ktype = &class_device_ktype; - kobject_init(&class_dev->kobj); + kobject_init_ng(&class_dev->kobj, &class_device_ktype); INIT_LIST_HEAD(&class_dev->node); } @@ -575,16 +574,13 @@ int class_device_add(struct class_device *class_dev) class_dev->class_id); /* first, register with generic layer. */ - error = kobject_set_name(&class_dev->kobj, "%s", class_dev->class_id); - if (error) - goto out2; - if (parent_class_dev) class_dev->kobj.parent = &parent_class_dev->kobj; else class_dev->kobj.parent = &parent_class->subsys.kobj; - error = kobject_add(&class_dev->kobj); + error = kobject_add_ng(&class_dev->kobj, class_dev->kobj.parent, + "%s", class_dev->class_id); if (error) goto out2; -- cgit v1.2.3-59-g8ed1b From 9990513c1ef040528c4e38163a073089d39c7903 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 23:05:35 -0700 Subject: Kobject: convert drivers/base/core.c to use kobject_init/add_ng() This converts the code to use the new kobject functions, cleaning up the logic in doing so. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index b3a931fe6b16..beb351600675 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -523,8 +523,7 @@ static void klist_children_put(struct klist_node *n) void device_initialize(struct device *dev) { dev->kobj.kset = devices_kset; - dev->kobj.ktype = &device_ktype; - kobject_init(&dev->kobj); + kobject_init_ng(&dev->kobj, &device_ktype); klist_init(&dev->klist_children, klist_children_get, klist_children_put); INIT_LIST_HEAD(&dev->dma_pools); @@ -729,7 +728,7 @@ static void device_remove_class_symlinks(struct device *dev) * This is part 2 of device_register(), though may be called * separately _iff_ device_initialize() has been called separately. * - * This adds it to the kobject hierarchy via kobject_add(), adds it + * This adds it to the kobject hierarchy via kobject_add_ng(), adds it * to the global and sibling lists for the device, then * adds it to the other relevant subsystems of the driver model. */ @@ -760,8 +759,7 @@ int device_add(struct device *dev) goto Error; /* first, register with generic layer. */ - kobject_set_name(&dev->kobj, "%s", dev->bus_id); - error = kobject_add(&dev->kobj); + error = kobject_add_ng(&dev->kobj, dev->kobj.parent, "%s", dev->bus_id); if (error) goto Error; -- cgit v1.2.3-59-g8ed1b From 78be3d2f574bf8a9886550ad07b8124b194badb8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 23:05:35 -0700 Subject: Kobject: convert drivers/net/iseries_veth.c to use kobject_init/add_ng() This converts the code to use the new kobject functions, cleaning up the logic in doing so. Cc: Kyle A. Lucke Cc: David Gibson Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/net/iseries_veth.c | 19 ++++++------------- 1 file changed, 6 insertions(+), 13 deletions(-) diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c index 97bd9dc2e52e..90ff4ec5f6fc 100644 --- a/drivers/net/iseries_veth.c +++ b/drivers/net/iseries_veth.c @@ -815,7 +815,7 @@ static int veth_init_connection(u8 rlp) { struct veth_lpar_connection *cnx; struct veth_msg *msgs; - int i, rc; + int i; if ( (rlp == this_lp) || ! HvLpConfig_doLpsCommunicateOnVirtualLan(this_lp, rlp) ) @@ -844,11 +844,7 @@ static int veth_init_connection(u8 rlp) /* This gets us 1 reference, which is held on behalf of the driver * infrastructure. It's released at module unload. */ - kobject_init(&cnx->kobject); - cnx->kobject.ktype = &veth_lpar_connection_ktype; - rc = kobject_set_name(&cnx->kobject, "cnx%.2d", rlp); - if (rc != 0) - return rc; + kobject_init_ng(&cnx->kobject, &veth_lpar_connection_ktype); msgs = kcalloc(VETH_NUMBUFFERS, sizeof(struct veth_msg), GFP_KERNEL); if (! msgs) { @@ -1087,11 +1083,8 @@ static struct net_device * __init veth_probe_one(int vlan, return NULL; } - kobject_init(&port->kobject); - port->kobject.parent = &dev->dev.kobj; - port->kobject.ktype = &veth_port_ktype; - kobject_set_name(&port->kobject, "veth_port"); - if (0 != kobject_add(&port->kobject)) + kobject_init_ng(&port->kobject, &veth_port_ktype); + if (0 != kobject_add_ng(&port->kobject, &dev->dev.kobj, "veth_port")) veth_error("Failed adding port for %s to sysfs.\n", dev->name); veth_info("%s attached to iSeries vlan %d (LPAR map = 0x%.4X)\n", @@ -1711,9 +1704,9 @@ static int __init veth_module_init(void) continue; kobj = &veth_cnx[i]->kobject; - kobj->parent = &veth_driver.driver.kobj; /* If the add failes, complain but otherwise continue */ - if (0 != kobject_add(kobj)) + if (0 != kobject_add_ng(kobj, &veth_driver.driver.kobj, + "cnx%.2d", veth_cnx[i]->remote_lp)) veth_error("cnx %d: Failed adding to sysfs.\n", i); } -- cgit v1.2.3-59-g8ed1b From a5815ddf26aa8208d4ad79b4fba5e6bf7d5ba688 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 23:05:35 -0700 Subject: Kobject: convert fs/char_dev.c to use kobject_init/add_ng() This converts the code to use the new kobject functions, cleaning up the logic in doing so. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- fs/char_dev.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/fs/char_dev.c b/fs/char_dev.c index c3bfa76765c4..b2dd5a036631 100644 --- a/fs/char_dev.c +++ b/fs/char_dev.c @@ -510,9 +510,8 @@ struct cdev *cdev_alloc(void) { struct cdev *p = kzalloc(sizeof(struct cdev), GFP_KERNEL); if (p) { - p->kobj.ktype = &ktype_cdev_dynamic; INIT_LIST_HEAD(&p->list); - kobject_init(&p->kobj); + kobject_init_ng(&p->kobj, &ktype_cdev_dynamic); } return p; } @@ -529,8 +528,7 @@ void cdev_init(struct cdev *cdev, const struct file_operations *fops) { memset(cdev, 0, sizeof *cdev); INIT_LIST_HEAD(&cdev->list); - cdev->kobj.ktype = &ktype_cdev_default; - kobject_init(&cdev->kobj); + kobject_init_ng(&cdev->kobj, &ktype_cdev_default); cdev->ops = fops; } -- cgit v1.2.3-59-g8ed1b From e43b9192c59402685bd1f809068dd13aa5931570 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 23:05:35 -0700 Subject: Kobject: convert kernel/params.c to use kobject_init/add_ng() This converts the code to use the new kobject functions, cleaning up the logic in doing so. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- kernel/params.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/kernel/params.c b/kernel/params.c index 97e092312155..1078b148ca80 100644 --- a/kernel/params.c +++ b/kernel/params.c @@ -561,11 +561,9 @@ static void __init kernel_param_sysfs_setup(const char *name, mk->mod = THIS_MODULE; mk->kobj.kset = module_kset; - mk->kobj.ktype = &module_ktype; - kobject_set_name(&mk->kobj, name); - kobject_init(&mk->kobj); - ret = kobject_add(&mk->kobj); + ret = kobject_init_and_add(&mk->kobj, &module_ktype, NULL, "%s", name); if (ret) { + kobject_put(&mk->kobj); printk(KERN_ERR "Module '%s' failed to be added to sysfs, " "error number %d\n", name, ret); printk(KERN_ERR "The system will be unstable now.\n"); -- cgit v1.2.3-59-g8ed1b From cf15126b3d4511e06e5299781ab74922590900be Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 23:05:35 -0700 Subject: Kobject: convert kernel/user.c to use kobject_init/add_ng() This converts the code to use the new kobject functions, cleaning up the logic in doing so. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- kernel/user.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/kernel/user.c b/kernel/user.c index 7f17e6e8fd65..ab4fd706993b 100644 --- a/kernel/user.c +++ b/kernel/user.c @@ -181,13 +181,12 @@ static int uids_user_create(struct user_struct *up) int error; memset(kobj, 0, sizeof(struct kobject)); - kobj->ktype = &uids_ktype; kobj->kset = uids_kset; - kobject_init(kobj); - kobject_set_name(&up->kobj, "%d", up->uid); - error = kobject_add(kobj); - if (error) + error = kobject_init_and_add(kobj, &uids_ktype, NULL, "%d", up->uid); + if (error) { + kobject_put(kobj); goto done; + } kobject_uevent(kobj, KOBJ_ADD); done: -- cgit v1.2.3-59-g8ed1b From 1eada11c88251e0a30ce5690d2607bb4293b3564 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 23:05:35 -0700 Subject: Kobject: convert mm/slub.c to use kobject_init/add_ng() This converts the code to use the new kobject functions, cleaning up the logic in doing so. Cc: Christoph Lameter Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- mm/slub.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/mm/slub.c b/mm/slub.c index d26177fb293b..5cc4b7dddb50 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -4025,13 +4025,12 @@ static int sysfs_slab_add(struct kmem_cache *s) name = create_unique_id(s); } - kobject_set_name(&s->kobj, name); s->kobj.kset = slab_kset; - s->kobj.ktype = &slab_ktype; - kobject_init(&s->kobj); - err = kobject_add(&s->kobj); - if (err) + err = kobject_init_and_add(&s->kobj, &slab_ktype, NULL, name); + if (err) { + kobject_put(&s->kobj); return err; + } err = sysfs_create_group(&s->kobj, &slab_attr_group); if (err) -- cgit v1.2.3-59-g8ed1b From e32cc7366d88eeba12d22272a73dd83fb570ccb0 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 23:05:35 -0700 Subject: Kobject: convert net/bridge/br_if.c to use kobject_init/add_ng() This converts the code to use the new kobject functions, cleaning up the logic in doing so. Cc: Stephen Hemminger Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- net/bridge/br_if.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c index dadec949d4fe..298e0f463c56 100644 --- a/net/bridge/br_if.c +++ b/net/bridge/br_if.c @@ -258,12 +258,6 @@ static struct net_bridge_port *new_nbp(struct net_bridge *br, p->state = BR_STATE_DISABLED; br_stp_port_timer_init(p); - kobject_init(&p->kobj); - kobject_set_name(&p->kobj, SYSFS_BRIDGE_PORT_ATTR); - p->kobj.ktype = &brport_ktype; - p->kobj.parent = &(dev->dev.kobj); - p->kobj.kset = NULL; - return p; } @@ -379,7 +373,8 @@ int br_add_if(struct net_bridge *br, struct net_device *dev) if (IS_ERR(p)) return PTR_ERR(p); - err = kobject_add(&p->kobj); + err = kobject_init_and_add(&p->kobj, &brport_ktype, &(dev->dev.kobj), + SYSFS_BRIDGE_PORT_ATTR); if (err) goto err0; @@ -416,6 +411,7 @@ err2: br_fdb_delete_by_port(br, p, 1); err1: kobject_del(&p->kobj); + return err; err0: kobject_put(&p->kobj); return err; -- cgit v1.2.3-59-g8ed1b From cc972e896b303f453f5893ecf8eca0d0e395ab64 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 1 Nov 2007 13:31:26 -0700 Subject: driver core: remove owner field from struct bus_type This isn't used by anything in the driver core, and by no one in the 204 different usages of it in the kernel tree. Remove this field so no one gets any idea that it is needed to be used. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/device.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/linux/device.h b/include/linux/device.h index a3b3ff15fc87..313e0b32bc09 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -51,7 +51,6 @@ extern void bus_remove_file(struct bus_type *, struct bus_attribute *); struct bus_type { const char * name; - struct module * owner; struct kset subsys; struct kset *drivers_kset; -- cgit v1.2.3-59-g8ed1b From 0fed80f7a63abd7168907267af69ee31f6bcf301 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 1 Nov 2007 19:41:16 -0700 Subject: driver core: add way to get to bus kset This allows an easier way to get to the kset associated with a struct bus_type (you have three to choose from...) This will make it easier to move these fields to be dynamic in a future patch. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/bus.c | 6 ++++++ drivers/pci/hotplug/pci_hotplug_core.c | 5 ++++- include/linux/device.h | 2 ++ 3 files changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/base/bus.c b/drivers/base/bus.c index 871607b7c876..8335a1079b0e 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -935,6 +935,12 @@ int bus_unregister_notifier(struct bus_type *bus, struct notifier_block *nb) } EXPORT_SYMBOL_GPL(bus_unregister_notifier); +struct kset *bus_get_kset(struct bus_type *bus) +{ + return &bus->subsys; +} +EXPORT_SYMBOL_GPL(bus_get_kset); + int __init buses_init(void) { bus_kset = kset_create_and_add("bus", &bus_uevent_ops, NULL); diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index 0f05e6a68b3b..3606d5b52a70 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -699,9 +699,12 @@ int __must_check pci_hp_change_slot_info(struct hotplug_slot *slot, static int __init pci_hotplug_init (void) { int result; + struct kset *pci_bus_kset; + + pci_bus_kset = bus_get_kset(&pci_bus_type); pci_hotplug_slots_kset = kset_create_and_add("slots", NULL, - &pci_bus_type.subsys.kobj); + &pci_bus_kset->kobj); if (!pci_hotplug_slots_kset) { result = -ENOMEM; err("Register subsys error\n"); diff --git a/include/linux/device.h b/include/linux/device.h index 313e0b32bc09..3cc13c32314a 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -117,6 +117,8 @@ extern int bus_unregister_notifier(struct bus_type *bus, #define BUS_NOTIFY_UNBIND_DRIVER 0x00000004 /* driver about to be unbound */ +extern struct kset *bus_get_kset(struct bus_type *bus); + struct device_driver { const char * name; struct bus_type * bus; -- cgit v1.2.3-59-g8ed1b From b249072ee6897fe4f8d461c7bb4b926223263c28 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 1 Nov 2007 19:41:16 -0700 Subject: driver core: add way to get to bus device klist This allows an easier way to get to the device klist associated with a struct bus_type (you have three to choose from...) This will make it easier to move these fields to be dynamic in a future patch. The only user of this is the PCI core which horribly abuses this interface to rearrange the order of the pci devices. This should be done using the existing bus device walking functions, but that's left for future patches. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/bus.c | 6 ++++++ drivers/pci/probe.c | 11 +++++++---- include/linux/device.h | 1 + 3 files changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/base/bus.c b/drivers/base/bus.c index 8335a1079b0e..9c9027b2c44e 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -941,6 +941,12 @@ struct kset *bus_get_kset(struct bus_type *bus) } EXPORT_SYMBOL_GPL(bus_get_kset); +struct klist *bus_get_device_klist(struct bus_type *bus) +{ + return &bus->klist_devices; +} +EXPORT_SYMBOL_GPL(bus_get_device_klist); + int __init buses_init(void) { bus_kset = kset_create_and_add("bus", &bus_uevent_ops, NULL); diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index c5ca3134513a..5fd585293e79 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1210,16 +1210,19 @@ static void __init pci_sort_breadthfirst_klist(void) struct klist_node *n; struct device *dev; struct pci_dev *pdev; + struct klist *device_klist; - spin_lock(&pci_bus_type.klist_devices.k_lock); - list_for_each_safe(pos, tmp, &pci_bus_type.klist_devices.k_list) { + device_klist = bus_get_device_klist(&pci_bus_type); + + spin_lock(&device_klist->k_lock); + list_for_each_safe(pos, tmp, &device_klist->k_list) { n = container_of(pos, struct klist_node, n_node); dev = container_of(n, struct device, knode_bus); pdev = to_pci_dev(dev); pci_insertion_sort_klist(pdev, &sorted_devices); } - list_splice(&sorted_devices, &pci_bus_type.klist_devices.k_list); - spin_unlock(&pci_bus_type.klist_devices.k_lock); + list_splice(&sorted_devices, &device_klist->k_list); + spin_unlock(&device_klist->k_lock); } static void __init pci_insertion_sort_devices(struct pci_dev *a, struct list_head *list) diff --git a/include/linux/device.h b/include/linux/device.h index 3cc13c32314a..62e695bd3c93 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -118,6 +118,7 @@ extern int bus_unregister_notifier(struct bus_type *bus, unbound */ extern struct kset *bus_get_kset(struct bus_type *bus); +extern struct klist *bus_get_device_klist(struct bus_type *bus); struct device_driver { const char * name; -- cgit v1.2.3-59-g8ed1b From c6f7e72a3f4641095ade9ded287d910c980c6148 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 1 Nov 2007 19:41:16 -0700 Subject: driver core: remove fields from struct bus_type struct bus_type is static everywhere in the kernel. This moves the kobject in the structure out of it, and a bunch of other private only to the driver core fields are now moved to a private structure. This lets us dynamically create the backing kobject properly and gives us the chance to be able to document to users exactly how to use the struct bus_type as there are no fields they can improperly access. Thanks to Kay for the build fixes on this patch. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/base.h | 30 ++++++++++++- drivers/base/bus.c | 116 +++++++++++++++++++++++++++--------------------- drivers/base/core.c | 6 +-- drivers/base/dd.c | 4 +- drivers/base/driver.c | 2 +- drivers/base/platform.c | 4 +- include/linux/device.h | 12 +---- 7 files changed, 104 insertions(+), 70 deletions(-) diff --git a/drivers/base/base.h b/drivers/base/base.h index 7e309a49a711..ca6d273064f8 100644 --- a/drivers/base/base.h +++ b/drivers/base/base.h @@ -1,6 +1,34 @@ -/* initialisation functions */ +/** + * struct bus_type_private - structure to hold the private to the driver core portions of the bus_type structure. + * + * @subsys - the struct kset that defines this bus. This is the main kobject + * @drivers_kset - the list of drivers associated with this bus + * @devices_kset - the list of devices associated with this bus + * @klist_devices - the klist to iterate over the @devices_kset + * @klist_drivers - the klist to iterate over the @drivers_kset + * @bus_notifier - the bus notifier list for anything that cares about things + * on this bus. + * @bus - pointer back to the struct bus_type that this structure is associated + * with. + * + * This structure is the one that is the actual kobject allowing struct + * bus_type to be statically allocated safely. Nothing outside of the driver + * core should ever touch these fields. + */ +struct bus_type_private { + struct kset subsys; + struct kset *drivers_kset; + struct kset *devices_kset; + struct klist klist_devices; + struct klist klist_drivers; + struct blocking_notifier_head bus_notifier; + unsigned int drivers_autoprobe:1; + struct bus_type *bus; +}; + +/* initialisation functions */ extern int devices_init(void); extern int buses_init(void); extern int classes_init(void); diff --git a/drivers/base/bus.c b/drivers/base/bus.c index 9c9027b2c44e..04d3850ff4b7 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -17,7 +17,7 @@ #include "power/power.h" #define to_bus_attr(_attr) container_of(_attr, struct bus_attribute, attr) -#define to_bus(obj) container_of(obj, struct bus_type, subsys.kobj) +#define to_bus(obj) container_of(obj, struct bus_type_private, subsys.kobj) /* * sysfs bindings for drivers @@ -32,13 +32,17 @@ static int __must_check bus_rescan_devices_helper(struct device *dev, static struct bus_type *bus_get(struct bus_type *bus) { - return bus ? container_of(kset_get(&bus->subsys), - struct bus_type, subsys) : NULL; + if (bus) { + kset_get(&bus->p->subsys); + return bus; + } + return NULL; } static void bus_put(struct bus_type *bus) { - kset_put(&bus->subsys); + if (bus) + kset_put(&bus->p->subsys); } static ssize_t @@ -104,11 +108,11 @@ static ssize_t bus_attr_show(struct kobject * kobj, struct attribute * attr, char * buf) { struct bus_attribute * bus_attr = to_bus_attr(attr); - struct bus_type * bus = to_bus(kobj); + struct bus_type_private *bus_priv = to_bus(kobj); ssize_t ret = 0; if (bus_attr->show) - ret = bus_attr->show(bus, buf); + ret = bus_attr->show(bus_priv->bus, buf); return ret; } @@ -117,11 +121,11 @@ bus_attr_store(struct kobject * kobj, struct attribute * attr, const char * buf, size_t count) { struct bus_attribute * bus_attr = to_bus_attr(attr); - struct bus_type * bus = to_bus(kobj); + struct bus_type_private *bus_priv = to_bus(kobj); ssize_t ret = 0; if (bus_attr->store) - ret = bus_attr->store(bus, buf, count); + ret = bus_attr->store(bus_priv->bus, buf, count); return ret; } @@ -134,7 +138,7 @@ int bus_create_file(struct bus_type * bus, struct bus_attribute * attr) { int error; if (bus_get(bus)) { - error = sysfs_create_file(&bus->subsys.kobj, &attr->attr); + error = sysfs_create_file(&bus->p->subsys.kobj, &attr->attr); bus_put(bus); } else error = -EINVAL; @@ -144,7 +148,7 @@ int bus_create_file(struct bus_type * bus, struct bus_attribute * attr) void bus_remove_file(struct bus_type * bus, struct bus_attribute * attr) { if (bus_get(bus)) { - sysfs_remove_file(&bus->subsys.kobj, &attr->attr); + sysfs_remove_file(&bus->p->subsys.kobj, &attr->attr); bus_put(bus); } } @@ -237,16 +241,16 @@ static DRIVER_ATTR(bind, S_IWUSR, NULL, driver_bind); static ssize_t show_drivers_autoprobe(struct bus_type *bus, char *buf) { - return sprintf(buf, "%d\n", bus->drivers_autoprobe); + return sprintf(buf, "%d\n", bus->p->drivers_autoprobe); } static ssize_t store_drivers_autoprobe(struct bus_type *bus, const char *buf, size_t count) { if (buf[0] == '0') - bus->drivers_autoprobe = 0; + bus->p->drivers_autoprobe = 0; else - bus->drivers_autoprobe = 1; + bus->p->drivers_autoprobe = 1; return count; } @@ -300,7 +304,7 @@ int bus_for_each_dev(struct bus_type * bus, struct device * start, if (!bus) return -EINVAL; - klist_iter_init_node(&bus->klist_devices, &i, + klist_iter_init_node(&bus->p->klist_devices, &i, (start ? &start->knode_bus : NULL)); while ((dev = next_device(&i)) && !error) error = fn(dev, data); @@ -333,7 +337,7 @@ struct device * bus_find_device(struct bus_type *bus, if (!bus) return NULL; - klist_iter_init_node(&bus->klist_devices, &i, + klist_iter_init_node(&bus->p->klist_devices, &i, (start ? &start->knode_bus : NULL)); while ((dev = next_device(&i))) if (match(dev, data) && get_device(dev)) @@ -379,7 +383,7 @@ int bus_for_each_drv(struct bus_type * bus, struct device_driver * start, if (!bus) return -EINVAL; - klist_iter_init_node(&bus->klist_drivers, &i, + klist_iter_init_node(&bus->p->klist_drivers, &i, start ? &start->knode_bus : NULL); while ((drv = next_driver(&i)) && !error) error = fn(drv, data); @@ -420,7 +424,7 @@ static void device_remove_attrs(struct bus_type * bus, struct device * dev) static int make_deprecated_bus_links(struct device *dev) { return sysfs_create_link(&dev->kobj, - &dev->bus->subsys.kobj, "bus"); + &dev->bus->p->subsys.kobj, "bus"); } static void remove_deprecated_bus_links(struct device *dev) @@ -449,12 +453,12 @@ int bus_add_device(struct device * dev) error = device_add_attrs(bus, dev); if (error) goto out_put; - error = sysfs_create_link(&bus->devices_kset->kobj, + error = sysfs_create_link(&bus->p->devices_kset->kobj, &dev->kobj, dev->bus_id); if (error) goto out_id; error = sysfs_create_link(&dev->kobj, - &dev->bus->subsys.kobj, "subsystem"); + &dev->bus->p->subsys.kobj, "subsystem"); if (error) goto out_subsys; error = make_deprecated_bus_links(dev); @@ -466,7 +470,7 @@ int bus_add_device(struct device * dev) out_deprecated: sysfs_remove_link(&dev->kobj, "subsystem"); out_subsys: - sysfs_remove_link(&bus->devices_kset->kobj, dev->bus_id); + sysfs_remove_link(&bus->p->devices_kset->kobj, dev->bus_id); out_id: device_remove_attrs(bus, dev); out_put: @@ -488,11 +492,11 @@ void bus_attach_device(struct device * dev) if (bus) { dev->is_registered = 1; - if (bus->drivers_autoprobe) + if (bus->p->drivers_autoprobe) ret = device_attach(dev); WARN_ON(ret < 0); if (ret >= 0) - klist_add_tail(&dev->knode_bus, &bus->klist_devices); + klist_add_tail(&dev->knode_bus, &bus->p->klist_devices); else dev->is_registered = 0; } @@ -512,7 +516,7 @@ void bus_remove_device(struct device * dev) if (dev->bus) { sysfs_remove_link(&dev->kobj, "subsystem"); remove_deprecated_bus_links(dev); - sysfs_remove_link(&dev->bus->devices_kset->kobj, dev->bus_id); + sysfs_remove_link(&dev->bus->p->devices_kset->kobj, dev->bus_id); device_remove_attrs(dev->bus, dev); if (dev->is_registered) { dev->is_registered = 0; @@ -638,18 +642,18 @@ int bus_add_driver(struct device_driver *drv) error = kobject_set_name(&drv->kobj, "%s", drv->name); if (error) goto out_put_bus; - drv->kobj.kset = bus->drivers_kset; + drv->kobj.kset = bus->p->drivers_kset; drv->kobj.ktype = &driver_ktype; error = kobject_register(&drv->kobj); if (error) goto out_put_bus; - if (drv->bus->drivers_autoprobe) { + if (drv->bus->p->drivers_autoprobe) { error = driver_attach(drv); if (error) goto out_unregister; } - klist_add_tail(&drv->knode_bus, &bus->klist_drivers); + klist_add_tail(&drv->knode_bus, &bus->p->klist_drivers); module_add_driver(drv->owner, drv); error = driver_create_file(drv, &driver_attr_uevent); @@ -828,7 +832,7 @@ static ssize_t bus_uevent_store(struct bus_type *bus, enum kobject_action action; if (kobject_action_type(buf, count, &action) == 0) - kobject_uevent(&bus->subsys.kobj, action); + kobject_uevent(&bus->p->subsys.kobj, action); return count; } static BUS_ATTR(uevent, S_IWUSR, NULL, bus_uevent_store); @@ -844,17 +848,26 @@ static BUS_ATTR(uevent, S_IWUSR, NULL, bus_uevent_store); int bus_register(struct bus_type * bus) { int retval; + struct bus_type_private *priv; + + priv = kzalloc(sizeof(struct bus_type_private), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->bus = bus; + bus->p = priv; - BLOCKING_INIT_NOTIFIER_HEAD(&bus->bus_notifier); + BLOCKING_INIT_NOTIFIER_HEAD(&priv->bus_notifier); - retval = kobject_set_name(&bus->subsys.kobj, "%s", bus->name); + retval = kobject_set_name(&priv->subsys.kobj, "%s", bus->name); if (retval) goto out; - bus->subsys.kobj.kset = bus_kset; - bus->subsys.kobj.ktype = &bus_ktype; + priv->subsys.kobj.kset = bus_kset; + priv->subsys.kobj.ktype = &bus_ktype; + priv->drivers_autoprobe = 1; - retval = kset_register(&bus->subsys); + retval = kset_register(&priv->subsys); if (retval) goto out; @@ -862,24 +875,23 @@ int bus_register(struct bus_type * bus) if (retval) goto bus_uevent_fail; - bus->devices_kset = kset_create_and_add("devices", NULL, - &bus->subsys.kobj); - if (!bus->devices_kset) { + priv->devices_kset = kset_create_and_add("devices", NULL, + &priv->subsys.kobj); + if (!priv->devices_kset) { retval = -ENOMEM; goto bus_devices_fail; } - bus->drivers_kset = kset_create_and_add("drivers", NULL, - &bus->subsys.kobj); - if (!bus->drivers_kset) { + priv->drivers_kset = kset_create_and_add("drivers", NULL, + &priv->subsys.kobj); + if (!priv->drivers_kset) { retval = -ENOMEM; goto bus_drivers_fail; } - klist_init(&bus->klist_devices, klist_devices_get, klist_devices_put); - klist_init(&bus->klist_drivers, NULL, NULL); + klist_init(&priv->klist_devices, klist_devices_get, klist_devices_put); + klist_init(&priv->klist_drivers, NULL, NULL); - bus->drivers_autoprobe = 1; retval = add_probe_files(bus); if (retval) goto bus_probe_files_fail; @@ -894,13 +906,14 @@ int bus_register(struct bus_type * bus) bus_attrs_fail: remove_probe_files(bus); bus_probe_files_fail: - kset_unregister(bus->drivers_kset); + kset_unregister(bus->p->drivers_kset); bus_drivers_fail: - kset_unregister(bus->devices_kset); + kset_unregister(bus->p->devices_kset); bus_devices_fail: bus_remove_file(bus, &bus_attr_uevent); bus_uevent_fail: - kset_unregister(&bus->subsys); + kset_unregister(&bus->p->subsys); + kfree(bus->p); out: return retval; } @@ -917,33 +930,34 @@ void bus_unregister(struct bus_type * bus) pr_debug("bus %s: unregistering\n", bus->name); bus_remove_attrs(bus); remove_probe_files(bus); - kset_unregister(bus->drivers_kset); - kset_unregister(bus->devices_kset); + kset_unregister(bus->p->drivers_kset); + kset_unregister(bus->p->devices_kset); bus_remove_file(bus, &bus_attr_uevent); - kset_unregister(&bus->subsys); + kset_unregister(&bus->p->subsys); + kfree(bus->p); } int bus_register_notifier(struct bus_type *bus, struct notifier_block *nb) { - return blocking_notifier_chain_register(&bus->bus_notifier, nb); + return blocking_notifier_chain_register(&bus->p->bus_notifier, nb); } EXPORT_SYMBOL_GPL(bus_register_notifier); int bus_unregister_notifier(struct bus_type *bus, struct notifier_block *nb) { - return blocking_notifier_chain_unregister(&bus->bus_notifier, nb); + return blocking_notifier_chain_unregister(&bus->p->bus_notifier, nb); } EXPORT_SYMBOL_GPL(bus_unregister_notifier); struct kset *bus_get_kset(struct bus_type *bus) { - return &bus->subsys; + return &bus->p->subsys; } EXPORT_SYMBOL_GPL(bus_get_kset); struct klist *bus_get_device_klist(struct bus_type *bus) { - return &bus->klist_devices; + return &bus->p->klist_devices; } EXPORT_SYMBOL_GPL(bus_get_device_klist); diff --git a/drivers/base/core.c b/drivers/base/core.c index beb351600675..414a480e10a3 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -769,7 +769,7 @@ int device_add(struct device *dev) /* notify clients of device entry (new way) */ if (dev->bus) - blocking_notifier_call_chain(&dev->bus->bus_notifier, + blocking_notifier_call_chain(&dev->bus->p->bus_notifier, BUS_NOTIFY_ADD_DEVICE, dev); error = device_create_file(dev, &uevent_attr); @@ -820,7 +820,7 @@ int device_add(struct device *dev) dpm_sysfs_remove(dev); PMError: if (dev->bus) - blocking_notifier_call_chain(&dev->bus->bus_notifier, + blocking_notifier_call_chain(&dev->bus->p->bus_notifier, BUS_NOTIFY_DEL_DEVICE, dev); device_remove_attrs(dev); AttrsError: @@ -999,7 +999,7 @@ void device_del(struct device * dev) if (platform_notify_remove) platform_notify_remove(dev); if (dev->bus) - blocking_notifier_call_chain(&dev->bus->bus_notifier, + blocking_notifier_call_chain(&dev->bus->p->bus_notifier, BUS_NOTIFY_DEL_DEVICE, dev); kobject_uevent(&dev->kobj, KOBJ_REMOVE); kobject_del(&dev->kobj); diff --git a/drivers/base/dd.c b/drivers/base/dd.c index 7ac474db88c5..7bf0e674c975 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -38,7 +38,7 @@ static void driver_bound(struct device *dev) dev->bus_id, dev->driver->name); if (dev->bus) - blocking_notifier_call_chain(&dev->bus->bus_notifier, + blocking_notifier_call_chain(&dev->bus->p->bus_notifier, BUS_NOTIFY_BOUND_DRIVER, dev); klist_add_tail(&dev->knode_driver, &dev->driver->klist_devices); @@ -296,7 +296,7 @@ static void __device_release_driver(struct device * dev) klist_remove(&dev->knode_driver); if (dev->bus) - blocking_notifier_call_chain(&dev->bus->bus_notifier, + blocking_notifier_call_chain(&dev->bus->p->bus_notifier, BUS_NOTIFY_UNBIND_DRIVER, dev); diff --git a/drivers/base/driver.c b/drivers/base/driver.c index 1c9770dfb801..f94be40646d2 100644 --- a/drivers/base/driver.c +++ b/drivers/base/driver.c @@ -185,7 +185,7 @@ void driver_unregister(struct device_driver * drv) */ struct device_driver *driver_find(const char *name, struct bus_type *bus) { - struct kobject *k = kset_find_obj(bus->drivers_kset, name); + struct kobject *k = kset_find_obj(bus->p->drivers_kset, name); if (k) return to_drv(k); return NULL; diff --git a/drivers/base/platform.c b/drivers/base/platform.c index fb5609241482..d56a05f94f67 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -497,12 +497,12 @@ int __init_or_module platform_driver_probe(struct platform_driver *drv, * if the probe was successful, and make sure any forced probes of * new devices fail. */ - spin_lock(&platform_bus_type.klist_drivers.k_lock); + spin_lock(&platform_bus_type.p->klist_drivers.k_lock); drv->probe = NULL; if (code == 0 && list_empty(&drv->driver.klist_devices.k_list)) retval = -ENODEV; drv->driver.probe = platform_drv_probe_fail; - spin_unlock(&platform_bus_type.klist_drivers.k_lock); + spin_unlock(&platform_bus_type.p->klist_drivers.k_lock); if (code != retval) platform_driver_unregister(drv); diff --git a/include/linux/device.h b/include/linux/device.h index 62e695bd3c93..3f24bf46d298 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -35,6 +35,7 @@ struct device_driver; struct class; struct class_device; struct bus_type; +struct bus_type_private; struct bus_attribute { struct attribute attr; @@ -51,15 +52,6 @@ extern void bus_remove_file(struct bus_type *, struct bus_attribute *); struct bus_type { const char * name; - - struct kset subsys; - struct kset *drivers_kset; - struct kset *devices_kset; - struct klist klist_devices; - struct klist klist_drivers; - - struct blocking_notifier_head bus_notifier; - struct bus_attribute * bus_attrs; struct device_attribute * dev_attrs; struct driver_attribute * drv_attrs; @@ -75,7 +67,7 @@ struct bus_type { int (*resume_early)(struct device * dev); int (*resume)(struct device * dev); - unsigned int drivers_autoprobe:1; + struct bus_type_private *p; }; extern int __must_check bus_register(struct bus_type * bus); -- cgit v1.2.3-59-g8ed1b From 15147ffd57576fc00a23ad8a020ff46493a4f924 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 28 Nov 2007 12:23:18 -0800 Subject: USB: use proper call to driver_create_file Don't try to call the "raw" sysfs_create_file when we already have a helper function to do this kind of work for us. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/driver.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index c51f8e9312e0..7c3aaa9c5402 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -91,8 +91,8 @@ static int usb_create_newid_file(struct usb_driver *usb_drv) goto exit; if (usb_drv->probe != NULL) - error = sysfs_create_file(&usb_drv->drvwrap.driver.kobj, - &driver_attr_new_id.attr); + error = driver_create_file(&usb_drv->drvwrap.driver, + &driver_attr_new_id); exit: return error; } @@ -103,8 +103,8 @@ static void usb_remove_newid_file(struct usb_driver *usb_drv) return; if (usb_drv->probe != NULL) - sysfs_remove_file(&usb_drv->drvwrap.driver.kobj, - &driver_attr_new_id.attr); + driver_remove_file(&usb_drv->drvwrap.driver, + &driver_attr_new_id); } static void usb_free_dynids(struct usb_driver *usb_drv) -- cgit v1.2.3-59-g8ed1b From 2344c6de6b6f2a4b07e4416aac9522d23e00d7bc Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 28 Nov 2007 12:23:18 -0800 Subject: PCMCIA: use proper call to driver_create_file Don't try to call the "raw" sysfs_create_file when we already have a helper function to do this kind of work for us. Signed-off-by: Greg Kroah-Hartman --- drivers/pcmcia/ds.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 5cf89a91da1e..15c18f5246d6 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -312,8 +312,7 @@ pcmcia_create_newid_file(struct pcmcia_driver *drv) { int error = 0; if (drv->probe != NULL) - error = sysfs_create_file(&drv->drv.kobj, - &driver_attr_new_id.attr); + error = driver_create_file(&drv->drv, &driver_attr_new_id); return error; } -- cgit v1.2.3-59-g8ed1b From 03d43b19b9f56c1d18bc8f2f7890534fbe6a285d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 28 Nov 2007 12:23:18 -0800 Subject: PCI: use proper call to driver_create_file Don't try to call the "raw" sysfs_create_file when we already have a helper function to do this kind of work for us. Signed-off-by: Greg Kroah-Hartman --- drivers/pci/pci-driver.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 6d1a21611818..73e362992694 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -96,17 +96,21 @@ pci_create_newid_file(struct pci_driver *drv) { int error = 0; if (drv->probe != NULL) - error = sysfs_create_file(&drv->driver.kobj, - &driver_attr_new_id.attr); + error = driver_create_file(&drv->driver, &driver_attr_new_id); return error; } +static void pci_remove_newid_file(struct pci_driver *drv) +{ + driver_remove_file(&drv->driver, &driver_attr_new_id); +} #else /* !CONFIG_HOTPLUG */ static inline void pci_free_dynids(struct pci_driver *drv) {} static inline int pci_create_newid_file(struct pci_driver *drv) { return 0; } +static inline void pci_remove_newid_file(struct pci_driver *drv) {} #endif /** @@ -447,6 +451,7 @@ int __pci_register_driver(struct pci_driver *drv, struct module *owner, void pci_unregister_driver(struct pci_driver *drv) { + pci_remove_newid_file(drv); driver_unregister(&drv->driver); pci_free_dynids(drv); } -- cgit v1.2.3-59-g8ed1b From 2b937303188807b498d1a3163f60305f0941538e Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 28 Nov 2007 12:23:18 -0800 Subject: PCI: remove foolish code from pci-driver.c The PCI bus should not be trying to declare its own attribute type. Especially as this code could never ever be called because the driver core overwrites the driver kobject type to be its own internal type. Delete all of this code as it was never being used and is not correct. Also update my copyright on the file while I'm touching things there. Signed-off-by: Greg Kroah-Hartman --- drivers/pci/pci-driver.c | 50 +++++------------------------------------------- 1 file changed, 5 insertions(+), 45 deletions(-) diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 73e362992694..c4fa35d1dd77 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -1,6 +1,11 @@ /* * drivers/pci/pci-driver.c * + * (C) Copyright 2002-2004, 2007 Greg Kroah-Hartman + * (C) Copyright 2007 Novell Inc. + * + * Released under the GPL v2 only. + * */ #include @@ -356,50 +361,6 @@ static void pci_device_shutdown(struct device *dev) drv->shutdown(pci_dev); } -#define kobj_to_pci_driver(obj) container_of(obj, struct device_driver, kobj) -#define attr_to_driver_attribute(obj) container_of(obj, struct driver_attribute, attr) - -static ssize_t -pci_driver_attr_show(struct kobject * kobj, struct attribute *attr, char *buf) -{ - struct device_driver *driver = kobj_to_pci_driver(kobj); - struct driver_attribute *dattr = attr_to_driver_attribute(attr); - ssize_t ret; - - if (!get_driver(driver)) - return -ENODEV; - - ret = dattr->show ? dattr->show(driver, buf) : -EIO; - - put_driver(driver); - return ret; -} - -static ssize_t -pci_driver_attr_store(struct kobject * kobj, struct attribute *attr, - const char *buf, size_t count) -{ - struct device_driver *driver = kobj_to_pci_driver(kobj); - struct driver_attribute *dattr = attr_to_driver_attribute(attr); - ssize_t ret; - - if (!get_driver(driver)) - return -ENODEV; - - ret = dattr->store ? dattr->store(driver, buf, count) : -EIO; - - put_driver(driver); - return ret; -} - -static struct sysfs_ops pci_driver_sysfs_ops = { - .show = pci_driver_attr_show, - .store = pci_driver_attr_store, -}; -static struct kobj_type pci_driver_kobj_type = { - .sysfs_ops = &pci_driver_sysfs_ops, -}; - /** * __pci_register_driver - register a new pci driver * @drv: the driver structure to register @@ -421,7 +382,6 @@ int __pci_register_driver(struct pci_driver *drv, struct module *owner, drv->driver.bus = &pci_bus_type; drv->driver.owner = owner; drv->driver.mod_name = mod_name; - drv->driver.kobj.ktype = &pci_driver_kobj_type; spin_lock_init(&drv->dynids.lock); INIT_LIST_HEAD(&drv->dynids.list); -- cgit v1.2.3-59-g8ed1b From 57c745340a60c51d2b9af3d4dcf7e0ede284855b Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Wed, 5 Dec 2007 12:50:23 +0100 Subject: driver core: Introduce default attribute groups. This is lot like default attributes for devices (and indeed, a lot of the code is lifted from there). Signed-off-by: Cornelia Huck Signed-off-by: Greg Kroah-Hartman --- drivers/base/driver.c | 42 +++++++++++++++++++++++++++++++++++++++++- include/linux/device.h | 1 + 2 files changed, 42 insertions(+), 1 deletion(-) diff --git a/drivers/base/driver.c b/drivers/base/driver.c index f94be40646d2..e3b58407fedc 100644 --- a/drivers/base/driver.c +++ b/drivers/base/driver.c @@ -142,6 +142,37 @@ void put_driver(struct device_driver * drv) kobject_put(&drv->kobj); } +static int driver_add_groups(struct device_driver *drv, + struct attribute_group **groups) +{ + int error = 0; + int i; + + if (groups) { + for (i = 0; groups[i]; i++) { + error = sysfs_create_group(&drv->kobj, groups[i]); + if (error) { + while (--i >= 0) + sysfs_remove_group(&drv->kobj, + groups[i]); + break; + } + } + } + return error; +} + +static void driver_remove_groups(struct device_driver *drv, + struct attribute_group **groups) +{ + int i; + + if (groups) + for (i = 0; groups[i]; i++) + sysfs_remove_group(&drv->kobj, groups[i]); +} + + /** * driver_register - register driver with bus * @drv: driver to register @@ -152,13 +183,21 @@ void put_driver(struct device_driver * drv) */ int driver_register(struct device_driver * drv) { + int ret; + if ((drv->bus->probe && drv->probe) || (drv->bus->remove && drv->remove) || (drv->bus->shutdown && drv->shutdown)) { printk(KERN_WARNING "Driver '%s' needs updating - please use bus_type methods\n", drv->name); } klist_init(&drv->klist_devices, NULL, NULL); - return bus_add_driver(drv); + ret = bus_add_driver(drv); + if (ret) + return ret; + ret = driver_add_groups(drv, drv->groups); + if (ret) + bus_remove_driver(drv); + return ret; } /** @@ -170,6 +209,7 @@ int driver_register(struct device_driver * drv) void driver_unregister(struct device_driver * drv) { + driver_remove_groups(drv, drv->groups); bus_remove_driver(drv); } diff --git a/include/linux/device.h b/include/linux/device.h index 3f24bf46d298..d974dda4aa51 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -129,6 +129,7 @@ struct device_driver { void (*shutdown) (struct device * dev); int (*suspend) (struct device * dev, pm_message_t state); int (*resume) (struct device * dev); + struct attribute_group **groups; }; -- cgit v1.2.3-59-g8ed1b From 5b88feb134e0a7413cb9cb6ba677943615ca56cc Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Wed, 5 Dec 2007 12:50:28 +0100 Subject: netiucv: Use device_driver default attribute groups. CC: Ursula Braun Signed-off-by: Cornelia Huck Signed-off-by: Greg Kroah-Hartman --- drivers/s390/net/netiucv.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c index c7ea9381db9f..d6e93f15440e 100644 --- a/drivers/s390/net/netiucv.c +++ b/drivers/s390/net/netiucv.c @@ -2089,6 +2089,11 @@ static struct attribute_group netiucv_drv_attr_group = { .attrs = netiucv_drv_attrs, }; +static struct attribute_group *netiucv_drv_attr_groups[] = { + &netiucv_drv_attr_group, + NULL, +}; + static void netiucv_banner(void) { PRINT_INFO("NETIUCV driver initialized\n"); @@ -2113,7 +2118,6 @@ static void __exit netiucv_exit(void) netiucv_unregister_device(dev); } - sysfs_remove_group(&netiucv_driver.kobj, &netiucv_drv_attr_group); driver_unregister(&netiucv_driver); iucv_unregister(&netiucv_handler, 1); iucv_unregister_dbf_views(); @@ -2133,6 +2137,7 @@ static int __init netiucv_init(void) if (rc) goto out_dbf; IUCV_DBF_TEXT(trace, 3, __FUNCTION__); + netiucv_driver.groups = netiucv_drv_attr_groups; rc = driver_register(&netiucv_driver); if (rc) { PRINT_ERR("NETIUCV: failed to register driver.\n"); @@ -2140,18 +2145,9 @@ static int __init netiucv_init(void) goto out_iucv; } - rc = sysfs_create_group(&netiucv_driver.kobj, &netiucv_drv_attr_group); - if (rc) { - PRINT_ERR("NETIUCV: failed to add driver attributes.\n"); - IUCV_DBF_TEXT_(setup, 2, - "ret %d - netiucv_drv_attr_group\n", rc); - goto out_driver; - } netiucv_banner(); return rc; -out_driver: - driver_unregister(&netiucv_driver); out_iucv: iucv_unregister(&netiucv_handler, 1); out_dbf: -- cgit v1.2.3-59-g8ed1b From 0478b83adb0269033221dc063d1185a224681ee8 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Wed, 5 Dec 2007 12:50:31 +0100 Subject: zfcp: Use device_driver default attribute groups. CC: Swen Schillig Signed-off-by: Cornelia Huck Signed-off-by: Greg Kroah-Hartman --- drivers/s390/scsi/zfcp_ccw.c | 14 ++++---------- drivers/s390/scsi/zfcp_ext.h | 3 +-- drivers/s390/scsi/zfcp_sysfs_driver.c | 27 ++++----------------------- 3 files changed, 9 insertions(+), 35 deletions(-) diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c index e01cbf152a81..86c3f6539a7d 100644 --- a/drivers/s390/scsi/zfcp_ccw.c +++ b/drivers/s390/scsi/zfcp_ccw.c @@ -52,6 +52,9 @@ static struct ccw_driver zfcp_ccw_driver = { .set_offline = zfcp_ccw_set_offline, .notify = zfcp_ccw_notify, .shutdown = zfcp_ccw_shutdown, + .driver = { + .groups = zfcp_driver_attr_groups, + }, }; MODULE_DEVICE_TABLE(ccw, zfcp_ccw_device_id); @@ -251,16 +254,7 @@ zfcp_ccw_notify(struct ccw_device *ccw_device, int event) int __init zfcp_ccw_register(void) { - int retval; - - retval = ccw_driver_register(&zfcp_ccw_driver); - if (retval) - goto out; - retval = zfcp_sysfs_driver_create_files(&zfcp_ccw_driver.driver); - if (retval) - ccw_driver_unregister(&zfcp_ccw_driver); - out: - return retval; + return ccw_driver_register(&zfcp_ccw_driver); } /** diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h index 8534cf09546c..06b1079b7f3d 100644 --- a/drivers/s390/scsi/zfcp_ext.h +++ b/drivers/s390/scsi/zfcp_ext.h @@ -27,8 +27,7 @@ extern struct zfcp_data zfcp_data; /******************************** SYSFS *************************************/ -extern int zfcp_sysfs_driver_create_files(struct device_driver *); -extern void zfcp_sysfs_driver_remove_files(struct device_driver *); +extern struct attribute_group *zfcp_driver_attr_groups[]; extern int zfcp_sysfs_adapter_create_files(struct device *); extern void zfcp_sysfs_adapter_remove_files(struct device *); extern int zfcp_sysfs_port_create_files(struct device *, u32); diff --git a/drivers/s390/scsi/zfcp_sysfs_driver.c b/drivers/s390/scsi/zfcp_sysfs_driver.c index 005e62f8593b..651edd58906a 100644 --- a/drivers/s390/scsi/zfcp_sysfs_driver.c +++ b/drivers/s390/scsi/zfcp_sysfs_driver.c @@ -98,28 +98,9 @@ static struct attribute_group zfcp_driver_attr_group = { .attrs = zfcp_driver_attrs, }; -/** - * zfcp_sysfs_create_driver_files - create sysfs driver files - * @dev: pointer to belonging device - * - * Create all sysfs attributes of the zfcp device driver - */ -int -zfcp_sysfs_driver_create_files(struct device_driver *drv) -{ - return sysfs_create_group(&drv->kobj, &zfcp_driver_attr_group); -} - -/** - * zfcp_sysfs_remove_driver_files - remove sysfs driver files - * @dev: pointer to belonging device - * - * Remove all sysfs attributes of the zfcp device driver - */ -void -zfcp_sysfs_driver_remove_files(struct device_driver *drv) -{ - sysfs_remove_group(&drv->kobj, &zfcp_driver_attr_group); -} +struct attribute_group *zfcp_driver_attr_groups[] = { + &zfcp_driver_attr_group, + NULL, +}; #undef ZFCP_LOG_AREA -- cgit v1.2.3-59-g8ed1b From 23b9c1ab5baf368a32b7242bf110ef1f48700d04 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 4 Dec 2007 22:53:16 -0800 Subject: Infiniband: make ipath driver use default driver groups. Make the ipath driver use the new driver functions so that it does not touch the sysfs portion of the driver structure. We also remove the redundant symlink from the device back to the driver, as it is already in the sysfs tree. Any userspace tools should be using the standard symlink, not some driver specific one. Cc: Roland Dreier Cc: Bryan O'Sullivan Cc: Arthur Jones Cc: Cornelia Huck Signed-off-by: Greg Kroah-Hartman --- drivers/infiniband/hw/ehca/ehca_main.c | 13 ++++++++----- drivers/infiniband/hw/ipath/ipath_driver.c | 17 ++++------------- drivers/infiniband/hw/ipath/ipath_kernel.h | 3 +-- drivers/infiniband/hw/ipath/ipath_sysfs.c | 30 +++++------------------------- 4 files changed, 18 insertions(+), 45 deletions(-) diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c index 6a56d86a2951..c9e32b46387f 100644 --- a/drivers/infiniband/hw/ehca/ehca_main.c +++ b/drivers/infiniband/hw/ehca/ehca_main.c @@ -590,6 +590,11 @@ static struct attribute_group ehca_drv_attr_grp = { .attrs = ehca_drv_attrs }; +static struct attribute_group *ehca_drv_attr_groups[] = { + &ehca_drv_attr_grp, + NULL, +}; + #define EHCA_RESOURCE_ATTR(name) \ static ssize_t ehca_show_##name(struct device *dev, \ struct device_attribute *attr, \ @@ -899,6 +904,9 @@ static struct of_platform_driver ehca_driver = { .match_table = ehca_device_table, .probe = ehca_probe, .remove = ehca_remove, + .driver = { + .groups = ehca_drv_attr_groups, + }, }; void ehca_poll_eqs(unsigned long data) @@ -957,10 +965,6 @@ int __init ehca_module_init(void) goto module_init2; } - ret = sysfs_create_group(&ehca_driver.driver.kobj, &ehca_drv_attr_grp); - if (ret) /* only complain; we can live without attributes */ - ehca_gen_err("Cannot create driver attributes ret=%d", ret); - if (ehca_poll_all_eqs != 1) { ehca_gen_err("WARNING!!!"); ehca_gen_err("It is possible to lose interrupts."); @@ -986,7 +990,6 @@ void __exit ehca_module_exit(void) if (ehca_poll_all_eqs == 1) del_timer_sync(&poll_eqs_timer); - sysfs_remove_group(&ehca_driver.driver.kobj, &ehca_drv_attr_grp); ibmebus_unregister_driver(&ehca_driver); ehca_destroy_slab_caches(); diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c index 1f152ded1e3c..fc355981bbab 100644 --- a/drivers/infiniband/hw/ipath/ipath_driver.c +++ b/drivers/infiniband/hw/ipath/ipath_driver.c @@ -121,6 +121,9 @@ static struct pci_driver ipath_driver = { .probe = ipath_init_one, .remove = __devexit_p(ipath_remove_one), .id_table = ipath_pci_tbl, + .driver = { + .groups = ipath_driver_attr_groups, + }, }; static void ipath_check_status(struct work_struct *work) @@ -2217,25 +2220,15 @@ static int __init infinipath_init(void) goto bail_unit; } - ret = ipath_driver_create_group(&ipath_driver.driver); - if (ret < 0) { - printk(KERN_ERR IPATH_DRV_NAME ": Unable to create driver " - "sysfs entries: error %d\n", -ret); - goto bail_pci; - } - ret = ipath_init_ipathfs(); if (ret < 0) { printk(KERN_ERR IPATH_DRV_NAME ": Unable to create " "ipathfs: error %d\n", -ret); - goto bail_group; + goto bail_pci; } goto bail; -bail_group: - ipath_driver_remove_group(&ipath_driver.driver); - bail_pci: pci_unregister_driver(&ipath_driver); @@ -2250,8 +2243,6 @@ static void __exit infinipath_cleanup(void) { ipath_exit_ipathfs(); - ipath_driver_remove_group(&ipath_driver.driver); - ipath_cdbg(VERBOSE, "Unregistering pci driver\n"); pci_unregister_driver(&ipath_driver); diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h index 8786dd7922e4..bb1dc075f1d1 100644 --- a/drivers/infiniband/hw/ipath/ipath_kernel.h +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -938,8 +938,7 @@ struct device_driver; extern const char ib_ipath_version[]; -int ipath_driver_create_group(struct device_driver *); -void ipath_driver_remove_group(struct device_driver *); +extern struct attribute_group *ipath_driver_attr_groups[]; int ipath_device_create_group(struct device *, struct ipath_devdata *); void ipath_device_remove_group(struct device *, struct ipath_devdata *); diff --git a/drivers/infiniband/hw/ipath/ipath_sysfs.c b/drivers/infiniband/hw/ipath/ipath_sysfs.c index e1ad7cfc21fd..aa27ca9f03b1 100644 --- a/drivers/infiniband/hw/ipath/ipath_sysfs.c +++ b/drivers/infiniband/hw/ipath/ipath_sysfs.c @@ -683,6 +683,11 @@ static struct attribute_group driver_attr_group = { .attrs = driver_attributes }; +struct attribute_group *ipath_driver_attr_groups[] = { + &driver_attr_group, + NULL, +}; + static DEVICE_ATTR(guid, S_IWUSR | S_IRUGO, show_guid, store_guid); static DEVICE_ATTR(lmc, S_IWUSR | S_IRUGO, show_lmc, store_lmc); static DEVICE_ATTR(lid, S_IWUSR | S_IRUGO, show_lid, store_lid); @@ -753,24 +758,9 @@ int ipath_expose_reset(struct device *dev) return ret; } -int ipath_driver_create_group(struct device_driver *drv) -{ - int ret; - - ret = sysfs_create_group(&drv->kobj, &driver_attr_group); - - return ret; -} - -void ipath_driver_remove_group(struct device_driver *drv) -{ - sysfs_remove_group(&drv->kobj, &driver_attr_group); -} - int ipath_device_create_group(struct device *dev, struct ipath_devdata *dd) { int ret; - char unit[5]; ret = sysfs_create_group(&dev->kobj, &dev_attr_group); if (ret) @@ -780,11 +770,6 @@ int ipath_device_create_group(struct device *dev, struct ipath_devdata *dd) if (ret) goto bail_attrs; - snprintf(unit, sizeof(unit), "%02d", dd->ipath_unit); - ret = sysfs_create_link(&dev->driver->kobj, &dev->kobj, unit); - if (ret == 0) - goto bail; - sysfs_remove_group(&dev->kobj, &dev_counter_attr_group); bail_attrs: sysfs_remove_group(&dev->kobj, &dev_attr_group); @@ -794,11 +779,6 @@ bail: void ipath_device_remove_group(struct device *dev, struct ipath_devdata *dd) { - char unit[5]; - - snprintf(unit, sizeof(unit), "%02d", dd->ipath_unit); - sysfs_remove_link(&dev->driver->kobj, unit); - sysfs_remove_group(&dev->kobj, &dev_counter_attr_group); sysfs_remove_group(&dev->kobj, &dev_attr_group); -- cgit v1.2.3-59-g8ed1b From cbe9c595f1de2e2a98403be2c14bfbc2486e84c4 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 19 Dec 2007 15:54:39 -0400 Subject: Driver: add driver_add_kobj for looney iseries_veth driver The iseries driver wants to hang kobjects off of its driver, so, to preserve backwards compatibility, we need to add a call to the driver core to allow future changes to work properly. Hopefully no one uses this function in the future and the iseries_veth driver authors come to their senses so I can remove this hack... Cc: Dave Larson Cc: Santiago Leon Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/driver.c | 24 ++++++++++++++++++++++++ drivers/net/iseries_veth.c | 2 +- include/linux/device.h | 4 ++++ 3 files changed, 29 insertions(+), 1 deletion(-) diff --git a/drivers/base/driver.c b/drivers/base/driver.c index e3b58407fedc..633ae1d70e14 100644 --- a/drivers/base/driver.c +++ b/drivers/base/driver.c @@ -123,6 +123,30 @@ void driver_remove_file(struct device_driver * drv, struct driver_attribute * at } +/** + * driver_add_kobj - add a kobject below the specified driver + * + * You really don't want to do this, this is only here due to one looney + * iseries driver, go poke those developers if you are annoyed about + * this... + */ +int driver_add_kobj(struct device_driver *drv, struct kobject *kobj, + const char *fmt, ...) +{ + va_list args; + char *name; + + va_start(args, fmt); + name = kvasprintf(GFP_KERNEL, fmt, args); + va_end(args); + + if (!name) + return -ENOMEM; + + return kobject_add_ng(kobj, &drv->kobj, "%s", name); +} +EXPORT_SYMBOL_GPL(driver_add_kobj); + /** * get_driver - increment driver reference count. * @drv: driver. diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c index 90ff4ec5f6fc..1a8299acd3f1 100644 --- a/drivers/net/iseries_veth.c +++ b/drivers/net/iseries_veth.c @@ -1705,7 +1705,7 @@ static int __init veth_module_init(void) kobj = &veth_cnx[i]->kobject; /* If the add failes, complain but otherwise continue */ - if (0 != kobject_add_ng(kobj, &veth_driver.driver.kobj, + if (0 != driver_add_kobj(&veth_driver.driver, kobj, "cnx%.2d", veth_cnx[i]->remote_lp)) veth_error("cnx %d: Failed adding to sysfs.\n", i); } diff --git a/include/linux/device.h b/include/linux/device.h index d974dda4aa51..721ee318d57b 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -156,6 +156,10 @@ extern int __must_check driver_create_file(struct device_driver *, struct driver_attribute *); extern void driver_remove_file(struct device_driver *, struct driver_attribute *); +extern int __must_check driver_add_kobj(struct device_driver *drv, + struct kobject *kobj, + const char *fmt, ...); + extern int __must_check driver_for_each_device(struct device_driver * drv, struct device *start, void *data, int (*fn)(struct device *, void *)); -- cgit v1.2.3-59-g8ed1b From c63469a3985a9771c18a916b8d42845d044ea0b1 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 28 Nov 2007 12:23:18 -0800 Subject: Driver core: move the driver specific module code into the driver core The module driver specific code should belong in the driver core, not in the kernel/ directory. So move this code. This is done in preparation for some struct device_driver rework that should be confined to the driver core code only. This also lets us keep from exporting these functions, as no external code should ever be calling it. Thanks to Andrew Morton for the !CONFIG_MODULES fix. Signed-off-by: Greg Kroah-Hartman --- drivers/base/Makefile | 1 + drivers/base/base.h | 9 +++++ drivers/base/module.c | 94 ++++++++++++++++++++++++++++++++++++++++++++++++++ include/linux/module.h | 15 -------- kernel/module.c | 87 ---------------------------------------------- 5 files changed, 104 insertions(+), 102 deletions(-) create mode 100644 drivers/base/module.c diff --git a/drivers/base/Makefile b/drivers/base/Makefile index b39ea3f59c9b..ff2696823f8d 100644 --- a/drivers/base/Makefile +++ b/drivers/base/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_FW_LOADER) += firmware_class.o obj-$(CONFIG_NUMA) += node.o obj-$(CONFIG_MEMORY_HOTPLUG_SPARSE) += memory.o obj-$(CONFIG_SMP) += topology.o +obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_SYS_HYPERVISOR) += hypervisor.o ifeq ($(CONFIG_DEBUG_DRIVER),y) diff --git a/drivers/base/base.h b/drivers/base/base.h index ca6d273064f8..05472360f6a2 100644 --- a/drivers/base/base.h +++ b/drivers/base/base.h @@ -73,3 +73,12 @@ extern char *make_class_name(const char *name, struct kobject *kobj); extern int devres_release_all(struct device *dev); extern struct kset *devices_kset; + +#ifdef CONFIG_MODULES +extern void module_add_driver(struct module *mod, struct device_driver *drv); +extern void module_remove_driver(struct device_driver *drv); +#else +static inline void module_add_driver(struct module *mod, + struct device_driver *drv) { } +static inline void module_remove_driver(struct device_driver *drv) { } +#endif diff --git a/drivers/base/module.c b/drivers/base/module.c new file mode 100644 index 000000000000..cad07be5de1a --- /dev/null +++ b/drivers/base/module.c @@ -0,0 +1,94 @@ +/* + * module.c - module sysfs fun for drivers + * + * This file is released under the GPLv2 + * + */ +#include +#include +#include +#include +#include "base.h" + +static char *make_driver_name(struct device_driver *drv) +{ + char *driver_name; + + driver_name = kmalloc(strlen(drv->name) + strlen(drv->bus->name) + 2, + GFP_KERNEL); + if (!driver_name) + return NULL; + + sprintf(driver_name, "%s:%s", drv->bus->name, drv->name); + return driver_name; +} + +static void module_create_drivers_dir(struct module_kobject *mk) +{ + if (!mk || mk->drivers_dir) + return; + + mk->drivers_dir = kobject_create_and_add("drivers", &mk->kobj); +} + +void module_add_driver(struct module *mod, struct device_driver *drv) +{ + char *driver_name; + int no_warn; + struct module_kobject *mk = NULL; + + if (!drv) + return; + + if (mod) + mk = &mod->mkobj; + else if (drv->mod_name) { + struct kobject *mkobj; + + /* Lookup built-in module entry in /sys/modules */ + mkobj = kset_find_obj(module_kset, drv->mod_name); + if (mkobj) { + mk = container_of(mkobj, struct module_kobject, kobj); + /* remember our module structure */ + drv->mkobj = mk; + /* kset_find_obj took a reference */ + kobject_put(mkobj); + } + } + + if (!mk) + return; + + /* Don't check return codes; these calls are idempotent */ + no_warn = sysfs_create_link(&drv->kobj, &mk->kobj, "module"); + driver_name = make_driver_name(drv); + if (driver_name) { + module_create_drivers_dir(mk); + no_warn = sysfs_create_link(mk->drivers_dir, &drv->kobj, + driver_name); + kfree(driver_name); + } +} + +void module_remove_driver(struct device_driver *drv) +{ + struct module_kobject *mk = NULL; + char *driver_name; + + if (!drv) + return; + + sysfs_remove_link(&drv->kobj, "module"); + + if (drv->owner) + mk = &drv->owner->mkobj; + else if (drv->mkobj) + mk = drv->mkobj; + if (mk && mk->drivers_dir) { + driver_name = make_driver_name(drv); + if (driver_name) { + sysfs_remove_link(mk->drivers_dir, driver_name); + kfree(driver_name); + } + } +} diff --git a/include/linux/module.h b/include/linux/module.h index fbe930b9b69c..c97bdb7eb957 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -609,21 +609,6 @@ static inline void module_remove_modinfo_attrs(struct module *mod) #endif /* CONFIG_SYSFS */ -#if defined(CONFIG_SYSFS) && defined(CONFIG_MODULES) - -void module_add_driver(struct module *mod, struct device_driver *drv); -void module_remove_driver(struct device_driver *drv); - -#else /* not both CONFIG_SYSFS && CONFIG_MODULES */ - -static inline void module_add_driver(struct module *mod, struct device_driver *drv) -{ } - -static inline void module_remove_driver(struct device_driver *drv) -{ } - -#endif - #define symbol_request(x) try_then_request_module(symbol_get(x), "symbol:" #x) /* BELOW HERE ALL THESE ARE OBSOLETE AND WILL VANISH */ diff --git a/kernel/module.c b/kernel/module.c index d03fcd9d652c..dc4d3f5ce820 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -2501,93 +2501,6 @@ void print_modules(void) printk("\n"); } -#ifdef CONFIG_SYSFS -static char *make_driver_name(struct device_driver *drv) -{ - char *driver_name; - - driver_name = kmalloc(strlen(drv->name) + strlen(drv->bus->name) + 2, - GFP_KERNEL); - if (!driver_name) - return NULL; - - sprintf(driver_name, "%s:%s", drv->bus->name, drv->name); - return driver_name; -} - -static void module_create_drivers_dir(struct module_kobject *mk) -{ - if (!mk || mk->drivers_dir) - return; - - mk->drivers_dir = kobject_create_and_add("drivers", &mk->kobj); -} - -void module_add_driver(struct module *mod, struct device_driver *drv) -{ - char *driver_name; - int no_warn; - struct module_kobject *mk = NULL; - - if (!drv) - return; - - if (mod) - mk = &mod->mkobj; - else if (drv->mod_name) { - struct kobject *mkobj; - - /* Lookup built-in module entry in /sys/modules */ - mkobj = kset_find_obj(module_kset, drv->mod_name); - if (mkobj) { - mk = container_of(mkobj, struct module_kobject, kobj); - /* remember our module structure */ - drv->mkobj = mk; - /* kset_find_obj took a reference */ - kobject_put(mkobj); - } - } - - if (!mk) - return; - - /* Don't check return codes; these calls are idempotent */ - no_warn = sysfs_create_link(&drv->kobj, &mk->kobj, "module"); - driver_name = make_driver_name(drv); - if (driver_name) { - module_create_drivers_dir(mk); - no_warn = sysfs_create_link(mk->drivers_dir, &drv->kobj, - driver_name); - kfree(driver_name); - } -} -EXPORT_SYMBOL(module_add_driver); - -void module_remove_driver(struct device_driver *drv) -{ - struct module_kobject *mk = NULL; - char *driver_name; - - if (!drv) - return; - - sysfs_remove_link(&drv->kobj, "module"); - - if (drv->owner) - mk = &drv->owner->mkobj; - else if (drv->mkobj) - mk = drv->mkobj; - if (mk && mk->drivers_dir) { - driver_name = make_driver_name(drv); - if (driver_name) { - sysfs_remove_link(mk->drivers_dir, driver_name); - kfree(driver_name); - } - } -} -EXPORT_SYMBOL(module_remove_driver); -#endif - #ifdef CONFIG_MODVERSIONS /* Generate the signature for struct module here, too, for modversions. */ void struct_module(struct module *mod) { return; } -- cgit v1.2.3-59-g8ed1b From e5dd12784617f0f1fae5f96a7fac1ec4c49fadbe Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 28 Nov 2007 15:59:15 -0800 Subject: Driver core: move the static kobject out of struct driver This patch removes the kobject, and a few other driver-core-only fields out of struct driver and into the driver core only. Now drivers can be safely create on the stack or statically (like they currently are.) Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/base.h | 8 ++++++ drivers/base/bus.c | 71 +++++++++++++++++++++++++++---------------------- drivers/base/dd.c | 24 ++++++++--------- drivers/base/driver.c | 40 ++++++++++++++++++---------- drivers/base/module.c | 12 ++++----- drivers/base/platform.c | 2 +- include/linux/device.h | 16 +++++------ 7 files changed, 99 insertions(+), 74 deletions(-) diff --git a/drivers/base/base.h b/drivers/base/base.h index 05472360f6a2..3b0f395552db 100644 --- a/drivers/base/base.h +++ b/drivers/base/base.h @@ -27,6 +27,14 @@ struct bus_type_private { struct bus_type *bus; }; +struct driver_private { + struct kobject kobj; + struct klist klist_devices; + struct klist_node knode_bus; + struct module_kobject *mkobj; + struct device_driver *driver; +}; +#define to_driver(obj) container_of(obj, struct driver_private, kobj) /* initialisation functions */ extern int devices_init(void); diff --git a/drivers/base/bus.c b/drivers/base/bus.c index 04d3850ff4b7..aa0c986c323a 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -3,6 +3,8 @@ * * Copyright (c) 2002-3 Patrick Mochel * Copyright (c) 2002-3 Open Source Development Labs + * Copyright (c) 2007 Greg Kroah-Hartman + * Copyright (c) 2007 Novell Inc. * * This file is released under the GPLv2 * @@ -24,7 +26,6 @@ */ #define to_drv_attr(_attr) container_of(_attr, struct driver_attribute, attr) -#define to_driver(obj) container_of(obj, struct device_driver, kobj) static int __must_check bus_rescan_devices_helper(struct device *dev, @@ -49,11 +50,11 @@ static ssize_t drv_attr_show(struct kobject * kobj, struct attribute * attr, char * buf) { struct driver_attribute * drv_attr = to_drv_attr(attr); - struct device_driver * drv = to_driver(kobj); + struct driver_private *drv_priv = to_driver(kobj); ssize_t ret = -EIO; if (drv_attr->show) - ret = drv_attr->show(drv, buf); + ret = drv_attr->show(drv_priv->driver, buf); return ret; } @@ -62,11 +63,11 @@ drv_attr_store(struct kobject * kobj, struct attribute * attr, const char * buf, size_t count) { struct driver_attribute * drv_attr = to_drv_attr(attr); - struct device_driver * drv = to_driver(kobj); + struct driver_private *drv_priv = to_driver(kobj); ssize_t ret = -EIO; if (drv_attr->store) - ret = drv_attr->store(drv, buf, count); + ret = drv_attr->store(drv_priv->driver, buf, count); return ret; } @@ -75,22 +76,12 @@ static struct sysfs_ops driver_sysfs_ops = { .store = drv_attr_store, }; - -static void driver_release(struct kobject * kobj) +static void driver_release(struct kobject *kobj) { - /* - * Yes this is an empty release function, it is this way because struct - * device is always a static object, not a dynamic one. Yes, this is - * not nice and bad, but remember, drivers are code, reference counted - * by the module count, not a device, which is really data. And yes, - * in the future I do want to have all drivers be created dynamically, - * and am working toward that goal, but it will take a bit longer... - * - * But do not let this example give _anyone_ the idea that they can - * create a release function without any code in it at all, to do that - * is almost always wrong. If you have any questions about this, - * please send an email to - */ + struct driver_private *drv_priv = to_driver(kobj); + + pr_debug("%s: freeing %s\n", __FUNCTION__, kobject_name(kobj)); + kfree(drv_priv); } static struct kobj_type driver_ktype = { @@ -350,7 +341,13 @@ struct device * bus_find_device(struct bus_type *bus, static struct device_driver * next_driver(struct klist_iter * i) { struct klist_node * n = klist_next(i); - return n ? container_of(n, struct device_driver, knode_bus) : NULL; + struct driver_private *drv_priv; + + if (n) { + drv_priv = container_of(n, struct driver_private, knode_bus); + return drv_priv->driver; + } + return NULL; } /** @@ -384,7 +381,7 @@ int bus_for_each_drv(struct bus_type * bus, struct device_driver * start, return -EINVAL; klist_iter_init_node(&bus->p->klist_drivers, &i, - start ? &start->knode_bus : NULL); + start ? &start->p->knode_bus : NULL); while ((drv = next_driver(&i)) && !error) error = fn(drv, data); klist_iter_exit(&i); @@ -620,7 +617,7 @@ static ssize_t driver_uevent_store(struct device_driver *drv, enum kobject_action action; if (kobject_action_type(buf, count, &action) == 0) - kobject_uevent(&drv->kobj, action); + kobject_uevent(&drv->p->kobj, action); return count; } static DRIVER_ATTR(uevent, S_IWUSR, NULL, driver_uevent_store); @@ -632,19 +629,29 @@ static DRIVER_ATTR(uevent, S_IWUSR, NULL, driver_uevent_store); */ int bus_add_driver(struct device_driver *drv) { - struct bus_type * bus = bus_get(drv->bus); + struct bus_type *bus; + struct driver_private *priv; int error = 0; + bus = bus_get(drv->bus); if (!bus) return -EINVAL; pr_debug("bus %s: add driver %s\n", bus->name, drv->name); - error = kobject_set_name(&drv->kobj, "%s", drv->name); + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + error = kobject_set_name(&priv->kobj, "%s", drv->name); if (error) goto out_put_bus; - drv->kobj.kset = bus->p->drivers_kset; - drv->kobj.ktype = &driver_ktype; - error = kobject_register(&drv->kobj); + priv->kobj.kset = bus->p->drivers_kset; + priv->kobj.ktype = &driver_ktype; + klist_init(&priv->klist_devices, NULL, NULL); + priv->driver = drv; + drv->p = priv; + error = kobject_register(&priv->kobj); if (error) goto out_put_bus; @@ -653,7 +660,7 @@ int bus_add_driver(struct device_driver *drv) if (error) goto out_unregister; } - klist_add_tail(&drv->knode_bus, &bus->p->klist_drivers); + klist_add_tail(&priv->knode_bus, &bus->p->klist_drivers); module_add_driver(drv->owner, drv); error = driver_create_file(drv, &driver_attr_uevent); @@ -676,7 +683,7 @@ int bus_add_driver(struct device_driver *drv) return error; out_unregister: - kobject_unregister(&drv->kobj); + kobject_unregister(&priv->kobj); out_put_bus: bus_put(bus); return error; @@ -699,11 +706,11 @@ void bus_remove_driver(struct device_driver * drv) remove_bind_files(drv); driver_remove_attrs(drv->bus, drv); driver_remove_file(drv, &driver_attr_uevent); - klist_remove(&drv->knode_bus); + klist_remove(&drv->p->knode_bus); pr_debug("bus %s: remove driver %s\n", drv->bus->name, drv->name); driver_detach(drv); module_remove_driver(drv); - kobject_unregister(&drv->kobj); + kobject_unregister(&drv->p->kobj); bus_put(drv->bus); } diff --git a/drivers/base/dd.c b/drivers/base/dd.c index 7bf0e674c975..87a348ce818c 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -11,6 +11,8 @@ * * Copyright (c) 2002-5 Patrick Mochel * Copyright (c) 2002-3 Open Source Development Labs + * Copyright (c) 2007 Greg Kroah-Hartman + * Copyright (c) 2007 Novell Inc. * * This file is released under the GPLv2 */ @@ -23,8 +25,6 @@ #include "base.h" #include "power/power.h" -#define to_drv(node) container_of(node, struct device_driver, kobj.entry) - static void driver_bound(struct device *dev) { @@ -41,20 +41,20 @@ static void driver_bound(struct device *dev) blocking_notifier_call_chain(&dev->bus->p->bus_notifier, BUS_NOTIFY_BOUND_DRIVER, dev); - klist_add_tail(&dev->knode_driver, &dev->driver->klist_devices); + klist_add_tail(&dev->knode_driver, &dev->driver->p->klist_devices); } static int driver_sysfs_add(struct device *dev) { int ret; - ret = sysfs_create_link(&dev->driver->kobj, &dev->kobj, + ret = sysfs_create_link(&dev->driver->p->kobj, &dev->kobj, kobject_name(&dev->kobj)); if (ret == 0) { - ret = sysfs_create_link(&dev->kobj, &dev->driver->kobj, + ret = sysfs_create_link(&dev->kobj, &dev->driver->p->kobj, "driver"); if (ret) - sysfs_remove_link(&dev->driver->kobj, + sysfs_remove_link(&dev->driver->p->kobj, kobject_name(&dev->kobj)); } return ret; @@ -65,7 +65,7 @@ static void driver_sysfs_remove(struct device *dev) struct device_driver *drv = dev->driver; if (drv) { - sysfs_remove_link(&drv->kobj, kobject_name(&dev->kobj)); + sysfs_remove_link(&drv->p->kobj, kobject_name(&dev->kobj)); sysfs_remove_link(&dev->kobj, "driver"); } } @@ -339,15 +339,15 @@ void driver_detach(struct device_driver * drv) struct device * dev; for (;;) { - spin_lock(&drv->klist_devices.k_lock); - if (list_empty(&drv->klist_devices.k_list)) { - spin_unlock(&drv->klist_devices.k_lock); + spin_lock(&drv->p->klist_devices.k_lock); + if (list_empty(&drv->p->klist_devices.k_list)) { + spin_unlock(&drv->p->klist_devices.k_lock); break; } - dev = list_entry(drv->klist_devices.k_list.prev, + dev = list_entry(drv->p->klist_devices.k_list.prev, struct device, knode_driver.n_node); get_device(dev); - spin_unlock(&drv->klist_devices.k_lock); + spin_unlock(&drv->p->klist_devices.k_lock); if (dev->parent) /* Needed for USB */ down(&dev->parent->sem); diff --git a/drivers/base/driver.c b/drivers/base/driver.c index 633ae1d70e14..5aacff208f21 100644 --- a/drivers/base/driver.c +++ b/drivers/base/driver.c @@ -3,6 +3,8 @@ * * Copyright (c) 2002-3 Patrick Mochel * Copyright (c) 2002-3 Open Source Development Labs + * Copyright (c) 2007 Greg Kroah-Hartman + * Copyright (c) 2007 Novell Inc. * * This file is released under the GPLv2 * @@ -15,7 +17,6 @@ #include "base.h" #define to_dev(node) container_of(node, struct device, driver_list) -#define to_drv(obj) container_of(obj, struct device_driver, kobj) static struct device * next_device(struct klist_iter * i) @@ -44,7 +45,7 @@ int driver_for_each_device(struct device_driver * drv, struct device * start, if (!drv) return -EINVAL; - klist_iter_init_node(&drv->klist_devices, &i, + klist_iter_init_node(&drv->p->klist_devices, &i, start ? &start->knode_driver : NULL); while ((dev = next_device(&i)) && !error) error = fn(dev, data); @@ -80,7 +81,7 @@ struct device * driver_find_device(struct device_driver *drv, if (!drv) return NULL; - klist_iter_init_node(&drv->klist_devices, &i, + klist_iter_init_node(&drv->p->klist_devices, &i, (start ? &start->knode_driver : NULL)); while ((dev = next_device(&i))) if (match(dev, data) && get_device(dev)) @@ -100,7 +101,7 @@ int driver_create_file(struct device_driver * drv, struct driver_attribute * att { int error; if (get_driver(drv)) { - error = sysfs_create_file(&drv->kobj, &attr->attr); + error = sysfs_create_file(&drv->p->kobj, &attr->attr); put_driver(drv); } else error = -EINVAL; @@ -117,7 +118,7 @@ int driver_create_file(struct device_driver * drv, struct driver_attribute * att void driver_remove_file(struct device_driver * drv, struct driver_attribute * attr) { if (get_driver(drv)) { - sysfs_remove_file(&drv->kobj, &attr->attr); + sysfs_remove_file(&drv->p->kobj, &attr->attr); put_driver(drv); } } @@ -143,7 +144,7 @@ int driver_add_kobj(struct device_driver *drv, struct kobject *kobj, if (!name) return -ENOMEM; - return kobject_add_ng(kobj, &drv->kobj, "%s", name); + return kobject_add_ng(kobj, &drv->p->kobj, "%s", name); } EXPORT_SYMBOL_GPL(driver_add_kobj); @@ -153,7 +154,15 @@ EXPORT_SYMBOL_GPL(driver_add_kobj); */ struct device_driver * get_driver(struct device_driver * drv) { - return drv ? to_drv(kobject_get(&drv->kobj)) : NULL; + if (drv) { + struct driver_private *priv; + struct kobject *kobj; + + kobj = kobject_get(&drv->p->kobj); + priv = to_driver(kobj); + return priv->driver; + } + return NULL; } @@ -163,7 +172,7 @@ struct device_driver * get_driver(struct device_driver * drv) */ void put_driver(struct device_driver * drv) { - kobject_put(&drv->kobj); + kobject_put(&drv->p->kobj); } static int driver_add_groups(struct device_driver *drv, @@ -174,10 +183,10 @@ static int driver_add_groups(struct device_driver *drv, if (groups) { for (i = 0; groups[i]; i++) { - error = sysfs_create_group(&drv->kobj, groups[i]); + error = sysfs_create_group(&drv->p->kobj, groups[i]); if (error) { while (--i >= 0) - sysfs_remove_group(&drv->kobj, + sysfs_remove_group(&drv->p->kobj, groups[i]); break; } @@ -193,7 +202,7 @@ static void driver_remove_groups(struct device_driver *drv, if (groups) for (i = 0; groups[i]; i++) - sysfs_remove_group(&drv->kobj, groups[i]); + sysfs_remove_group(&drv->p->kobj, groups[i]); } @@ -214,7 +223,6 @@ int driver_register(struct device_driver * drv) (drv->bus->shutdown && drv->shutdown)) { printk(KERN_WARNING "Driver '%s' needs updating - please use bus_type methods\n", drv->name); } - klist_init(&drv->klist_devices, NULL, NULL); ret = bus_add_driver(drv); if (ret) return ret; @@ -250,8 +258,12 @@ void driver_unregister(struct device_driver * drv) struct device_driver *driver_find(const char *name, struct bus_type *bus) { struct kobject *k = kset_find_obj(bus->p->drivers_kset, name); - if (k) - return to_drv(k); + struct driver_private *priv; + + if (k) { + priv = to_driver(k); + return priv->driver; + } return NULL; } diff --git a/drivers/base/module.c b/drivers/base/module.c index cad07be5de1a..103be9cacb05 100644 --- a/drivers/base/module.c +++ b/drivers/base/module.c @@ -50,7 +50,7 @@ void module_add_driver(struct module *mod, struct device_driver *drv) if (mkobj) { mk = container_of(mkobj, struct module_kobject, kobj); /* remember our module structure */ - drv->mkobj = mk; + drv->p->mkobj = mk; /* kset_find_obj took a reference */ kobject_put(mkobj); } @@ -60,11 +60,11 @@ void module_add_driver(struct module *mod, struct device_driver *drv) return; /* Don't check return codes; these calls are idempotent */ - no_warn = sysfs_create_link(&drv->kobj, &mk->kobj, "module"); + no_warn = sysfs_create_link(&drv->p->kobj, &mk->kobj, "module"); driver_name = make_driver_name(drv); if (driver_name) { module_create_drivers_dir(mk); - no_warn = sysfs_create_link(mk->drivers_dir, &drv->kobj, + no_warn = sysfs_create_link(mk->drivers_dir, &drv->p->kobj, driver_name); kfree(driver_name); } @@ -78,12 +78,12 @@ void module_remove_driver(struct device_driver *drv) if (!drv) return; - sysfs_remove_link(&drv->kobj, "module"); + sysfs_remove_link(&drv->p->kobj, "module"); if (drv->owner) mk = &drv->owner->mkobj; - else if (drv->mkobj) - mk = drv->mkobj; + else if (drv->p->mkobj) + mk = drv->p->mkobj; if (mk && mk->drivers_dir) { driver_name = make_driver_name(drv); if (driver_name) { diff --git a/drivers/base/platform.c b/drivers/base/platform.c index d56a05f94f67..bdd59e8358f0 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -499,7 +499,7 @@ int __init_or_module platform_driver_probe(struct platform_driver *drv, */ spin_lock(&platform_bus_type.p->klist_drivers.k_lock); drv->probe = NULL; - if (code == 0 && list_empty(&drv->driver.klist_devices.k_list)) + if (code == 0 && list_empty(&drv->driver.p->klist_devices.k_list)) retval = -ENODEV; drv->driver.probe = platform_drv_probe_fail; spin_unlock(&platform_bus_type.p->klist_drivers.k_lock); diff --git a/include/linux/device.h b/include/linux/device.h index 721ee318d57b..92ba3a874627 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -32,6 +32,7 @@ struct device; struct device_driver; +struct driver_private; struct class; struct class_device; struct bus_type; @@ -113,16 +114,11 @@ extern struct kset *bus_get_kset(struct bus_type *bus); extern struct klist *bus_get_device_klist(struct bus_type *bus); struct device_driver { - const char * name; - struct bus_type * bus; - - struct kobject kobj; - struct klist klist_devices; - struct klist_node knode_bus; + const char *name; + struct bus_type *bus; - struct module * owner; - const char * mod_name; /* used for built-in modules */ - struct module_kobject * mkobj; + struct module *owner; + const char *mod_name; /* used for built-in modules */ int (*probe) (struct device * dev); int (*remove) (struct device * dev); @@ -130,6 +126,8 @@ struct device_driver { int (*suspend) (struct device * dev, pm_message_t state); int (*resume) (struct device * dev); struct attribute_group **groups; + + struct driver_private *p; }; -- cgit v1.2.3-59-g8ed1b From 7dc72b2842381684b864750af31a5fb168dec764 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 28 Nov 2007 23:49:41 -0800 Subject: Driver core: clean up debugging messages The driver core debugging messages are a mess. This provides a unified message that makes them actually useful. The format for new kobject debug messages should be: driver/bus/class: 'OBJECT_NAME': FUNCTION_NAME: message.\n Note, the class code is not changed in this patch due to pending patches in my queue that this would conflict with. A later patch will clean them up. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/bus.c | 14 +++++++------- drivers/base/core.c | 23 +++++++++++++---------- drivers/base/dd.c | 16 ++++++++-------- 3 files changed, 28 insertions(+), 25 deletions(-) diff --git a/drivers/base/bus.c b/drivers/base/bus.c index aa0c986c323a..937fc100b64a 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -80,7 +80,7 @@ static void driver_release(struct kobject *kobj) { struct driver_private *drv_priv = to_driver(kobj); - pr_debug("%s: freeing %s\n", __FUNCTION__, kobject_name(kobj)); + pr_debug("driver: '%s': %s\n", kobject_name(kobj), __FUNCTION__); kfree(drv_priv); } @@ -446,7 +446,7 @@ int bus_add_device(struct device * dev) int error = 0; if (bus) { - pr_debug("bus %s: add device %s\n", bus->name, dev->bus_id); + pr_debug("bus: '%s': add device %s\n", bus->name, dev->bus_id); error = device_add_attrs(bus, dev); if (error) goto out_put; @@ -519,7 +519,7 @@ void bus_remove_device(struct device * dev) dev->is_registered = 0; klist_del(&dev->knode_bus); } - pr_debug("bus %s: remove device %s\n", dev->bus->name, dev->bus_id); + pr_debug("bus: '%s': remove device %s\n", dev->bus->name, dev->bus_id); device_release_driver(dev); bus_put(dev->bus); } @@ -637,7 +637,7 @@ int bus_add_driver(struct device_driver *drv) if (!bus) return -EINVAL; - pr_debug("bus %s: add driver %s\n", bus->name, drv->name); + pr_debug("bus: '%s': add driver %s\n", bus->name, drv->name); priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) @@ -707,7 +707,7 @@ void bus_remove_driver(struct device_driver * drv) driver_remove_attrs(drv->bus, drv); driver_remove_file(drv, &driver_attr_uevent); klist_remove(&drv->p->knode_bus); - pr_debug("bus %s: remove driver %s\n", drv->bus->name, drv->name); + pr_debug("bus: '%s': remove driver %s\n", drv->bus->name, drv->name); driver_detach(drv); module_remove_driver(drv); kobject_unregister(&drv->p->kobj); @@ -907,7 +907,7 @@ int bus_register(struct bus_type * bus) if (retval) goto bus_attrs_fail; - pr_debug("bus type '%s' registered\n", bus->name); + pr_debug("bus: '%s': registered\n", bus->name); return 0; bus_attrs_fail: @@ -934,7 +934,7 @@ out: */ void bus_unregister(struct bus_type * bus) { - pr_debug("bus %s: unregistering\n", bus->name); + pr_debug("bus: '%s': unregistering\n", bus->name); bus_remove_attrs(bus); remove_probe_files(bus); kset_unregister(bus->p->drivers_kset); diff --git a/drivers/base/core.c b/drivers/base/core.c index 414a480e10a3..22fdf320a2a6 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -193,15 +193,16 @@ static int dev_uevent(struct kset *kset, struct kobject *kobj, if (dev->bus && dev->bus->uevent) { retval = dev->bus->uevent(dev, env); if (retval) - pr_debug ("%s: bus uevent() returned %d\n", - __FUNCTION__, retval); + pr_debug("device: '%s': %s: bus uevent() returned %d\n", + dev->bus_id, __FUNCTION__, retval); } /* have the class specific function add its stuff */ if (dev->class && dev->class->dev_uevent) { retval = dev->class->dev_uevent(dev, env); if (retval) - pr_debug("%s: class uevent() returned %d\n", + pr_debug("device: '%s': %s: class uevent() " + "returned %d\n", dev->bus_id, __FUNCTION__, retval); } @@ -209,7 +210,8 @@ static int dev_uevent(struct kset *kset, struct kobject *kobj, if (dev->type && dev->type->uevent) { retval = dev->type->uevent(dev, env); if (retval) - pr_debug("%s: dev_type uevent() returned %d\n", + pr_debug("device: '%s': %s: dev_type uevent() " + "returned %d\n", dev->bus_id, __FUNCTION__, retval); } @@ -751,7 +753,7 @@ int device_add(struct device *dev) goto Error; } - pr_debug("DEV: registering device: ID = '%s'\n", dev->bus_id); + pr_debug("device: '%s': %s\n", dev->bus_id, __FUNCTION__); parent = get_device(dev->parent); error = setup_parent(dev, parent); @@ -1020,7 +1022,7 @@ void device_del(struct device * dev) */ void device_unregister(struct device * dev) { - pr_debug("DEV: Unregistering device. ID = '%s'\n", dev->bus_id); + pr_debug("device: '%s': %s\n", dev->bus_id, __FUNCTION__); device_del(dev); put_device(dev); } @@ -1116,7 +1118,7 @@ EXPORT_SYMBOL_GPL(device_remove_file); static void device_create_release(struct device *dev) { - pr_debug("%s called for %s\n", __FUNCTION__, dev->bus_id); + pr_debug("device: '%s': %s\n", dev->bus_id, __FUNCTION__); kfree(dev); } @@ -1259,7 +1261,8 @@ int device_rename(struct device *dev, char *new_name) if (!dev) return -EINVAL; - pr_debug("DEVICE: renaming '%s' to '%s'\n", dev->bus_id, new_name); + pr_debug("device: '%s': %s: renaming to '%s'\n", dev->bus_id, + __FUNCTION__, new_name); #ifdef CONFIG_SYSFS_DEPRECATED if ((dev->class) && (dev->parent)) @@ -1378,8 +1381,8 @@ int device_move(struct device *dev, struct device *new_parent) put_device(new_parent); goto out; } - pr_debug("DEVICE: moving '%s' to '%s'\n", dev->bus_id, - new_parent ? new_parent->bus_id : ""); + pr_debug("device: '%s': %s: moving to '%s'\n", dev->bus_id, + __FUNCTION__, new_parent ? new_parent->bus_id : ""); error = kobject_move(&dev->kobj, new_parent_kobj); if (error) { put_device(new_parent); diff --git a/drivers/base/dd.c b/drivers/base/dd.c index 87a348ce818c..54922647522d 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -34,8 +34,8 @@ static void driver_bound(struct device *dev) return; } - pr_debug("bound device '%s' to driver '%s'\n", - dev->bus_id, dev->driver->name); + pr_debug("driver: '%s': %s: bound to device '%s'\n", dev->bus_id, + __FUNCTION__, dev->driver->name); if (dev->bus) blocking_notifier_call_chain(&dev->bus->p->bus_notifier, @@ -102,8 +102,8 @@ static int really_probe(struct device *dev, struct device_driver *drv) int ret = 0; atomic_inc(&probe_count); - pr_debug("%s: Probing driver %s with device %s\n", - drv->bus->name, drv->name, dev->bus_id); + pr_debug("bus: '%s': %s: probing driver %s with device %s\n", + drv->bus->name, __FUNCTION__, drv->name, dev->bus_id); WARN_ON(!list_empty(&dev->devres_head)); dev->driver = drv; @@ -125,8 +125,8 @@ static int really_probe(struct device *dev, struct device_driver *drv) driver_bound(dev); ret = 1; - pr_debug("%s: Bound Device %s to Driver %s\n", - drv->bus->name, dev->bus_id, drv->name); + pr_debug("bus: '%s': %s: bound device %s to driver %s\n", + drv->bus->name, __FUNCTION__, dev->bus_id, drv->name); goto done; probe_failed: @@ -192,8 +192,8 @@ int driver_probe_device(struct device_driver * drv, struct device * dev) if (drv->bus->match && !drv->bus->match(dev, drv)) goto done; - pr_debug("%s: Matched Device %s with Driver %s\n", - drv->bus->name, dev->bus_id, drv->name); + pr_debug("bus: '%s': %s: matched device %s with driver %s\n", + drv->bus->name, __FUNCTION__, dev->bus_id, drv->name); ret = really_probe(dev, drv); -- cgit v1.2.3-59-g8ed1b From c8e90d822bff3e0502d004facedb05859f98055f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 15:54:39 -0400 Subject: Kobject: change drivers/base/bus to use kobject_init_and_add Stop using kobject_register, as this way we can control the sending of the uevent properly, after everything is properly initialized. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/bus.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/base/bus.c b/drivers/base/bus.c index 937fc100b64a..aea579365f6d 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -643,15 +643,12 @@ int bus_add_driver(struct device_driver *drv) if (!priv) return -ENOMEM; - error = kobject_set_name(&priv->kobj, "%s", drv->name); - if (error) - goto out_put_bus; - priv->kobj.kset = bus->p->drivers_kset; - priv->kobj.ktype = &driver_ktype; klist_init(&priv->klist_devices, NULL, NULL); priv->driver = drv; drv->p = priv; - error = kobject_register(&priv->kobj); + priv->kobj.kset = bus->p->drivers_kset; + error = kobject_init_and_add(&priv->kobj, &driver_ktype, NULL, + "%s", drv->name); if (error) goto out_put_bus; @@ -681,6 +678,7 @@ int bus_add_driver(struct device_driver *drv) __FUNCTION__, drv->name); } + kobject_uevent(&priv->kobj, KOBJ_ADD); return error; out_unregister: kobject_unregister(&priv->kobj); -- cgit v1.2.3-59-g8ed1b From ef2c51746dc89c2326ce522f8fb8a57695780e75 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 16 Nov 2007 11:57:28 -0500 Subject: Driver core: fix race in __device_release_driver This patch (as1013) was suggested by David Woodhouse; it fixes a race in the driver core. If a device is unregistered at the same time as its driver is unloaded, the driver's code pages may be unmapped while the remove method is still running. The calls to get_driver() and put_driver() were intended to prevent this, but they don't work if the driver's module count has already dropped to 0. Instead, the patch keeps the device on the driver's list until after the remove method has returned. This forces the necessary synchronization to occur. Signed-off-by: Alan Stern Signed-off-by: David Woodhouse Signed-off-by: Greg Kroah-Hartman --- drivers/base/dd.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/base/dd.c b/drivers/base/dd.c index 54922647522d..b0726eb6405e 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -289,11 +289,10 @@ static void __device_release_driver(struct device * dev) { struct device_driver * drv; - drv = get_driver(dev->driver); + drv = dev->driver; if (drv) { driver_sysfs_remove(dev); sysfs_remove_link(&dev->kobj, "driver"); - klist_remove(&dev->knode_driver); if (dev->bus) blocking_notifier_call_chain(&dev->bus->p->bus_notifier, @@ -306,7 +305,7 @@ static void __device_release_driver(struct device * dev) drv->remove(dev); devres_release_all(dev); dev->driver = NULL; - put_driver(drv); + klist_remove(&dev->knode_driver); } } -- cgit v1.2.3-59-g8ed1b From da231fd5d113ab6da5dab7a2d2c38d0a540f939c Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Wed, 21 Nov 2007 17:29:15 +0100 Subject: Driver core: fix class glue dir cleanup logic We should remove the glue directory between the class and the bus device _after_ we sent out the 'remove' event for the device, otherwise the parent relationship is no longer valid, and composing the path with deleted sysfs entries will not work. Cc: Alan Stern Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 206 ++++++++++++++++++++++++---------------------------- 1 file changed, 94 insertions(+), 112 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index 22fdf320a2a6..13cae18936c5 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -18,7 +18,7 @@ #include #include #include - +#include #include #include "base.h" @@ -538,22 +538,20 @@ void device_initialize(struct device *dev) } #ifdef CONFIG_SYSFS_DEPRECATED -static struct kobject * get_device_parent(struct device *dev, - struct device *parent) +static struct kobject *get_device_parent(struct device *dev, + struct device *parent) { - /* - * Set the parent to the class, not the parent device - * for topmost devices in class hierarchy. - * This keeps sysfs from having a symlink to make old - * udevs happy - */ + /* class devices without a parent live in /sys/class// */ if (dev->class && (!parent || parent->class != dev->class)) return &dev->class->subsys.kobj; + /* all other devices keep their parent */ else if (parent) return &parent->kobj; return NULL; } + +static inline void cleanup_device_parent(struct device *dev) {} #else static struct kobject *virtual_device_parent(struct device *dev) { @@ -566,8 +564,8 @@ static struct kobject *virtual_device_parent(struct device *dev) return virtual_dir; } -static struct kobject * get_device_parent(struct device *dev, - struct device *parent) +static struct kobject *get_device_parent(struct device *dev, + struct device *parent) { int retval; @@ -618,6 +616,34 @@ static struct kobject * get_device_parent(struct device *dev, return &parent->kobj; return NULL; } + +static void cleanup_device_parent(struct device *dev) +{ + struct device *d; + int other = 0; + + if (!dev->class) + return; + + /* see if we live in a parent class directory */ + if (dev->kobj.parent->kset != &dev->class->class_dirs) + return; + + /* if we are the last child of our class, delete the directory */ + down(&dev->class->sem); + list_for_each_entry(d, &dev->class->devices, node) { + if (d == dev) + continue; + if (d->kobj.parent == dev->kobj.parent) { + other = 1; + break; + } + } + if (!other) + kobject_del(dev->kobj.parent); + kobject_put(dev->kobj.parent); + up(&dev->class->sem); +} #endif static int setup_parent(struct device *dev, struct device *parent) @@ -637,65 +663,74 @@ static int device_add_class_symlinks(struct device *dev) if (!dev->class) return 0; + error = sysfs_create_link(&dev->kobj, &dev->class->subsys.kobj, "subsystem"); if (error) goto out; - /* - * If this is not a "fake" compatible device, then create the - * symlink from the class to the device. - */ + +#ifdef CONFIG_SYSFS_DEPRECATED + /* stacked class devices need a symlink in the class directory */ if (dev->kobj.parent != &dev->class->subsys.kobj) { error = sysfs_create_link(&dev->class->subsys.kobj, &dev->kobj, dev->bus_id); if (error) goto out_subsys; } + if (dev->parent) { -#ifdef CONFIG_SYSFS_DEPRECATED - { - struct device *parent = dev->parent; - char *class_name; - - /* - * In old sysfs stacked class devices had 'device' - * link pointing to real device instead of parent - */ - while (parent->class && !parent->bus && parent->parent) - parent = parent->parent; - - error = sysfs_create_link(&dev->kobj, - &parent->kobj, - "device"); - if (error) - goto out_busid; + struct device *parent = dev->parent; + char *class_name; - class_name = make_class_name(dev->class->name, - &dev->kobj); - if (class_name) - error = sysfs_create_link(&dev->parent->kobj, - &dev->kobj, class_name); - kfree(class_name); - if (error) - goto out_device; - } -#else - error = sysfs_create_link(&dev->kobj, &dev->parent->kobj, + /* + * stacked class devices have the 'device' link + * pointing to the bus device instead of the parent + */ + while (parent->class && !parent->bus && parent->parent) + parent = parent->parent; + + error = sysfs_create_link(&dev->kobj, + &parent->kobj, "device"); if (error) goto out_busid; -#endif + + class_name = make_class_name(dev->class->name, + &dev->kobj); + if (class_name) + error = sysfs_create_link(&dev->parent->kobj, + &dev->kobj, class_name); + kfree(class_name); + if (error) + goto out_device; } return 0; -#ifdef CONFIG_SYSFS_DEPRECATED out_device: if (dev->parent) sysfs_remove_link(&dev->kobj, "device"); -#endif out_busid: if (dev->kobj.parent != &dev->class->subsys.kobj) sysfs_remove_link(&dev->class->subsys.kobj, dev->bus_id); +#else + /* link in the class directory pointing to the device */ + error = sysfs_create_link(&dev->class->subsys.kobj, &dev->kobj, + dev->bus_id); + if (error) + goto out_subsys; + + if (dev->parent) { + error = sysfs_create_link(&dev->kobj, &dev->parent->kobj, + "device"); + if (error) + goto out_busid; + } + return 0; + +out_busid: + sysfs_remove_link(&dev->class->subsys.kobj, dev->bus_id); +#endif + out_subsys: sysfs_remove_link(&dev->kobj, "subsystem"); out: @@ -706,8 +741,9 @@ static void device_remove_class_symlinks(struct device *dev) { if (!dev->class) return; - if (dev->parent) { + #ifdef CONFIG_SYSFS_DEPRECATED + if (dev->parent) { char *class_name; class_name = make_class_name(dev->class->name, &dev->kobj); @@ -715,11 +751,18 @@ static void device_remove_class_symlinks(struct device *dev) sysfs_remove_link(&dev->parent->kobj, class_name); kfree(class_name); } -#endif sysfs_remove_link(&dev->kobj, "device"); } + if (dev->kobj.parent != &dev->class->subsys.kobj) sysfs_remove_link(&dev->class->subsys.kobj, dev->bus_id); +#else + if (dev->parent) + sysfs_remove_link(&dev->kobj, "device"); + + sysfs_remove_link(&dev->class->subsys.kobj, dev->bus_id); +#endif + sysfs_remove_link(&dev->kobj, "subsystem"); } @@ -830,26 +873,6 @@ int device_add(struct device *dev) SymlinkError: if (MAJOR(dev->devt)) device_remove_file(dev, &devt_attr); - - if (dev->class) { - sysfs_remove_link(&dev->kobj, "subsystem"); - /* If this is not a "fake" compatible device, remove the - * symlink from the class to the device. */ - if (dev->kobj.parent != &dev->class->subsys.kobj) - sysfs_remove_link(&dev->class->subsys.kobj, - dev->bus_id); - if (parent) { -#ifdef CONFIG_SYSFS_DEPRECATED - char *class_name = make_class_name(dev->class->name, - &dev->kobj); - if (class_name) - sysfs_remove_link(&dev->parent->kobj, - class_name); - kfree(class_name); -#endif - sysfs_remove_link(&dev->kobj, "device"); - } - } ueventattrError: device_remove_file(dev, &uevent_attr); attrError: @@ -932,23 +955,7 @@ void device_del(struct device * dev) if (MAJOR(dev->devt)) device_remove_file(dev, &devt_attr); if (dev->class) { - sysfs_remove_link(&dev->kobj, "subsystem"); - /* If this is not a "fake" compatible device, remove the - * symlink from the class to the device. */ - if (dev->kobj.parent != &dev->class->subsys.kobj) - sysfs_remove_link(&dev->class->subsys.kobj, - dev->bus_id); - if (parent) { -#ifdef CONFIG_SYSFS_DEPRECATED - char *class_name = make_class_name(dev->class->name, - &dev->kobj); - if (class_name) - sysfs_remove_link(&dev->parent->kobj, - class_name); - kfree(class_name); -#endif - sysfs_remove_link(&dev->kobj, "device"); - } + device_remove_class_symlinks(dev); down(&dev->class->sem); /* notify any interfaces that the device is now gone */ @@ -958,31 +965,6 @@ void device_del(struct device * dev) /* remove the device from the class list */ list_del_init(&dev->node); up(&dev->class->sem); - - /* If we live in a parent class-directory, unreference it */ - if (dev->kobj.parent->kset == &dev->class->class_dirs) { - struct device *d; - int other = 0; - - /* - * if we are the last child of our class, delete - * our class-directory at this parent - */ - down(&dev->class->sem); - list_for_each_entry(d, &dev->class->devices, node) { - if (d == dev) - continue; - if (d->kobj.parent == dev->kobj.parent) { - other = 1; - break; - } - } - if (!other) - kobject_del(dev->kobj.parent); - - kobject_put(dev->kobj.parent); - up(&dev->class->sem); - } } device_remove_file(dev, &uevent_attr); device_remove_attrs(dev); @@ -1004,9 +986,9 @@ void device_del(struct device * dev) blocking_notifier_call_chain(&dev->bus->p->bus_notifier, BUS_NOTIFY_DEL_DEVICE, dev); kobject_uevent(&dev->kobj, KOBJ_REMOVE); + cleanup_device_parent(dev); kobject_del(&dev->kobj); - if (parent) - put_device(parent); + put_device(parent); } /** -- cgit v1.2.3-59-g8ed1b From 97c146ef075dc40ae34407c03d3860fc3850b8e8 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Thu, 29 Nov 2007 23:46:11 +0100 Subject: sysfs: fix /sys/module/*/holders after sysfs logic change Sysfs symlinks now require fully registered kobjects as a target, otherwise the call to create a symlink will fail. Here we register the kobject before we request the symlink in the holders directory. Signed-off-by: Kay Sievers Cc: Tejun Heo Signed-off-by: Greg Kroah-Hartman --- kernel/module.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/kernel/module.c b/kernel/module.c index dc4d3f5ce820..0ae811785c59 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -1227,6 +1227,8 @@ int mod_sysfs_init(struct module *mod) kobject_init(&mod->mkobj.kobj); + /* delay uevent until full sysfs population */ + err = kobject_add(&mod->mkobj.kobj); out: return err; } @@ -1237,11 +1239,6 @@ int mod_sysfs_setup(struct module *mod, { int err; - /* delay uevent until full sysfs population */ - err = kobject_add(&mod->mkobj.kobj); - if (err) - goto out; - mod->holders_dir = kobject_create_and_add("holders", &mod->mkobj.kobj); if (!mod->holders_dir) { err = -ENOMEM; @@ -1266,7 +1263,6 @@ out_unreg_holders: out_unreg: kobject_del(&mod->mkobj.kobj); kobject_put(&mod->mkobj.kobj); -out: return err; } #endif @@ -1883,10 +1879,10 @@ static struct module *load_module(void __user *umod, /* Now we've moved module, initialize linked lists, etc. */ module_unload_init(mod); - /* Initialize kobject, so we can reference it. */ + /* add kobject, so we can reference it. */ err = mod_sysfs_init(mod); if (err) - goto cleanup; + goto free_unload; /* Set up license info based on the info section */ set_license(mod, get_modinfo(sechdrs, infoindex, "license")); @@ -2056,6 +2052,9 @@ static struct module *load_module(void __user *umod, arch_cleanup: module_arch_cleanup(mod); cleanup: + kobject_del(&mod->mkobj.kobj); + kobject_put(&mod->mkobj.kobj); + free_unload: module_unload_free(mod); module_free(mod, mod->module_init); free_core: -- cgit v1.2.3-59-g8ed1b From 09f82ea92822a7bbb7e816508abbda47ed54a77f Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 19 Nov 2007 10:53:40 -0500 Subject: Kobject: drop child->parent ref at unregistration This patch (as1015) reverts changes that were made to the driver core about four years ago. The intent back then was to avoid certain kinds of invalid memory accesses by leaving kernel objects allocated as long as any of their children were still allocated. The original and correct approach was to wait only as long as any children were still _registered_; that's what this patch reinstates. This fixes a problem in the SCSI core made visible by the class_device to regular device conversion: A reference loop (scsi_device holds reference to request_queue, which is the child of a gendisk, which is the child of the scsi_device) prevents the data structures from being released, even though they are deregistered okay. It's possible that this change will cause a few bugs to surface, things that have been hidden for several years. They can be fixed easily enough by having the child device take an explicit reference to the parent whenever needed. Signed-off-by: Alan Stern Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- lib/kobject.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/lib/kobject.c b/lib/kobject.c index 1015f74212d0..493e991abb1b 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -149,12 +149,16 @@ void kobject_init(struct kobject * kobj) static void unlink(struct kobject * kobj) { + struct kobject *parent = kobj->parent; + if (kobj->kset) { spin_lock(&kobj->kset->list_lock); list_del_init(&kobj->entry); spin_unlock(&kobj->kset->list_lock); } + kobj->parent = NULL; kobject_put(kobj); + kobject_put(parent); } /** @@ -208,7 +212,6 @@ int kobject_add(struct kobject * kobj) if (error) { /* unlink does the kobject_put() for us */ unlink(kobj); - kobject_put(parent); /* be noisy on error issues */ if (error == -EEXIST) @@ -590,7 +593,6 @@ static void kobject_cleanup(struct kobject *kobj) { struct kobj_type * t = get_ktype(kobj); struct kset * s = kobj->kset; - struct kobject * parent = kobj->parent; const char *name = kobj->k_name; pr_debug("kobject: '%s' (%p): %s\n", @@ -604,7 +606,6 @@ static void kobject_cleanup(struct kobject *kobj) } if (s) kset_put(s); - kobject_put(parent); } static void kobject_release(struct kref *kref) -- cgit v1.2.3-59-g8ed1b From edfaa7c36574f1bf09c65ad602412db9da5f96bf Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Mon, 21 May 2007 22:08:01 +0200 Subject: Driver core: convert block from raw kobjects to core devices This moves the block devices to /sys/class/block. It will create a flat list of all block devices, with the disks and partitions in one directory. For compatibility /sys/block is created and contains symlinks to the disks. /sys/class/block |-- sda -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda |-- sda1 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda1 |-- sda10 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda10 |-- sda5 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda5 |-- sda6 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda6 |-- sda7 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda7 |-- sda8 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda8 |-- sda9 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda9 `-- sr0 -> ../../devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0 /sys/block/ |-- sda -> ../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda `-- sr0 -> ../devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0 Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- block/genhd.c | 416 ++++++++++++++++++++------------------------- block/ll_rw_blk.c | 4 +- drivers/base/class.c | 7 + drivers/base/core.c | 20 ++- drivers/block/aoe/aoeblk.c | 51 +++--- drivers/block/nbd.c | 15 +- drivers/ide/ide-probe.c | 2 +- drivers/md/dm.c | 4 +- drivers/md/md.c | 8 +- fs/block_dev.c | 8 +- fs/partitions/check.c | 315 ++++++++++++---------------------- include/linux/genhd.h | 37 ++-- init/do_mounts.c | 108 +----------- 13 files changed, 385 insertions(+), 610 deletions(-) diff --git a/block/genhd.c b/block/genhd.c index 69aa7389d484..5e4ab4b37d9f 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -17,9 +17,10 @@ #include #include -struct kset *block_kset; -static struct kset_uevent_ops block_uevent_ops; -static DEFINE_MUTEX(block_subsys_lock); +static DEFINE_MUTEX(block_class_lock); +#ifndef CONFIG_SYSFS_DEPRECATED +struct kobject *block_depr; +#endif /* * Can be deleted altogether. Later. @@ -38,19 +39,17 @@ static inline int major_to_index(int major) } #ifdef CONFIG_PROC_FS - void blkdev_show(struct seq_file *f, off_t offset) { struct blk_major_name *dp; if (offset < BLKDEV_MAJOR_HASH_SIZE) { - mutex_lock(&block_subsys_lock); + mutex_lock(&block_class_lock); for (dp = major_names[offset]; dp; dp = dp->next) seq_printf(f, "%3d %s\n", dp->major, dp->name); - mutex_unlock(&block_subsys_lock); + mutex_unlock(&block_class_lock); } } - #endif /* CONFIG_PROC_FS */ int register_blkdev(unsigned int major, const char *name) @@ -58,7 +57,7 @@ int register_blkdev(unsigned int major, const char *name) struct blk_major_name **n, *p; int index, ret = 0; - mutex_lock(&block_subsys_lock); + mutex_lock(&block_class_lock); /* temporary */ if (major == 0) { @@ -103,7 +102,7 @@ int register_blkdev(unsigned int major, const char *name) kfree(p); } out: - mutex_unlock(&block_subsys_lock); + mutex_unlock(&block_class_lock); return ret; } @@ -115,7 +114,7 @@ void unregister_blkdev(unsigned int major, const char *name) struct blk_major_name *p = NULL; int index = major_to_index(major); - mutex_lock(&block_subsys_lock); + mutex_lock(&block_class_lock); for (n = &major_names[index]; *n; n = &(*n)->next) if ((*n)->major == major) break; @@ -125,7 +124,7 @@ void unregister_blkdev(unsigned int major, const char *name) p = *n; *n = p->next; } - mutex_unlock(&block_subsys_lock); + mutex_unlock(&block_class_lock); kfree(p); } @@ -138,29 +137,30 @@ static struct kobj_map *bdev_map; * range must be nonzero * The hash chain is sorted on range, so that subranges can override. */ -void blk_register_region(dev_t dev, unsigned long range, struct module *module, +void blk_register_region(dev_t devt, unsigned long range, struct module *module, struct kobject *(*probe)(dev_t, int *, void *), int (*lock)(dev_t, void *), void *data) { - kobj_map(bdev_map, dev, range, module, probe, lock, data); + kobj_map(bdev_map, devt, range, module, probe, lock, data); } EXPORT_SYMBOL(blk_register_region); -void blk_unregister_region(dev_t dev, unsigned long range) +void blk_unregister_region(dev_t devt, unsigned long range) { - kobj_unmap(bdev_map, dev, range); + kobj_unmap(bdev_map, devt, range); } EXPORT_SYMBOL(blk_unregister_region); -static struct kobject *exact_match(dev_t dev, int *part, void *data) +static struct kobject *exact_match(dev_t devt, int *part, void *data) { struct gendisk *p = data; - return &p->kobj; + + return &p->dev.kobj; } -static int exact_lock(dev_t dev, void *data) +static int exact_lock(dev_t devt, void *data) { struct gendisk *p = data; @@ -195,8 +195,6 @@ void unlink_gendisk(struct gendisk *disk) disk->minors); } -#define to_disk(obj) container_of(obj,struct gendisk,kobj) - /** * get_gendisk - get partitioning information for a given device * @dev: device to get partitioning information for @@ -204,10 +202,12 @@ void unlink_gendisk(struct gendisk *disk) * This function gets the structure containing partitioning * information for the given device @dev. */ -struct gendisk *get_gendisk(dev_t dev, int *part) +struct gendisk *get_gendisk(dev_t devt, int *part) { - struct kobject *kobj = kobj_lookup(bdev_map, dev, part); - return kobj ? to_disk(kobj) : NULL; + struct kobject *kobj = kobj_lookup(bdev_map, devt, part); + struct device *dev = kobj_to_dev(kobj); + + return kobj ? dev_to_disk(dev) : NULL; } /* @@ -217,13 +217,17 @@ struct gendisk *get_gendisk(dev_t dev, int *part) */ void __init printk_all_partitions(void) { - int n; + struct device *dev; struct gendisk *sgp; + char buf[BDEVNAME_SIZE]; + int n; - mutex_lock(&block_subsys_lock); + mutex_lock(&block_class_lock); /* For each block device... */ - list_for_each_entry(sgp, &block_kset->list, kobj.entry) { - char buf[BDEVNAME_SIZE]; + list_for_each_entry(dev, &block_class.devices, node) { + if (dev->type != &disk_type) + continue; + sgp = dev_to_disk(dev); /* * Don't show empty devices or things that have been surpressed */ @@ -256,38 +260,46 @@ void __init printk_all_partitions(void) sgp->major, n + 1 + sgp->first_minor, (unsigned long long)sgp->part[n]->nr_sects >> 1, disk_name(sgp, n + 1, buf)); - } /* partition subloop */ - } /* Block device loop */ + } + } - mutex_unlock(&block_subsys_lock); - return; + mutex_unlock(&block_class_lock); } #ifdef CONFIG_PROC_FS /* iterator */ static void *part_start(struct seq_file *part, loff_t *pos) { - struct list_head *p; - loff_t l = *pos; + loff_t k = *pos; + struct device *dev; - mutex_lock(&block_subsys_lock); - list_for_each(p, &block_kset->list) - if (!l--) - return list_entry(p, struct gendisk, kobj.entry); + mutex_lock(&block_class_lock); + list_for_each_entry(dev, &block_class.devices, node) { + if (dev->type != &disk_type) + continue; + if (!k--) + return dev_to_disk(dev); + } return NULL; } static void *part_next(struct seq_file *part, void *v, loff_t *pos) { - struct list_head *p = ((struct gendisk *)v)->kobj.entry.next; + struct gendisk *gp = v; + struct device *dev; ++*pos; - return p==&block_kset->list ? NULL : - list_entry(p, struct gendisk, kobj.entry); + list_for_each_entry(dev, &gp->dev.node, node) { + if (&dev->node == &block_class.devices) + return NULL; + if (dev->type == &disk_type) + return dev_to_disk(dev); + } + return NULL; } static void part_stop(struct seq_file *part, void *v) { - mutex_unlock(&block_subsys_lock); + mutex_unlock(&block_class_lock); } static int show_partition(struct seq_file *part, void *v) @@ -296,7 +308,7 @@ static int show_partition(struct seq_file *part, void *v) int n; char buf[BDEVNAME_SIZE]; - if (&sgp->kobj.entry == block_kset->list.next) + if (&sgp->dev.node == block_class.devices.next) seq_puts(part, "major minor #blocks name\n\n"); /* Don't show non-partitionable removeable devices or empty devices */ @@ -326,109 +338,81 @@ static int show_partition(struct seq_file *part, void *v) } struct seq_operations partitions_op = { - .start =part_start, - .next = part_next, - .stop = part_stop, - .show = show_partition + .start = part_start, + .next = part_next, + .stop = part_stop, + .show = show_partition }; #endif extern int blk_dev_init(void); -static struct kobject *base_probe(dev_t dev, int *part, void *data) +static struct kobject *base_probe(dev_t devt, int *part, void *data) { - if (request_module("block-major-%d-%d", MAJOR(dev), MINOR(dev)) > 0) + if (request_module("block-major-%d-%d", MAJOR(devt), MINOR(devt)) > 0) /* Make old-style 2.4 aliases work */ - request_module("block-major-%d", MAJOR(dev)); + request_module("block-major-%d", MAJOR(devt)); return NULL; } static int __init genhd_device_init(void) { - bdev_map = kobj_map_init(base_probe, &block_subsys_lock); + class_register(&block_class); + bdev_map = kobj_map_init(base_probe, &block_class_lock); blk_dev_init(); - block_kset = kset_create_and_add("block", &block_uevent_ops, NULL); - if (!block_kset) { - printk(KERN_WARNING "%s: kset_create error\n", __FUNCTION__); - return -ENOMEM; - } + +#ifndef CONFIG_SYSFS_DEPRECATED + /* create top-level block dir */ + block_depr = kobject_create_and_add("block", NULL); +#endif return 0; } subsys_initcall(genhd_device_init); - - -/* - * kobject & sysfs bindings for block devices - */ -static ssize_t disk_attr_show(struct kobject *kobj, struct attribute *attr, - char *page) +static ssize_t disk_range_show(struct device *dev, + struct device_attribute *attr, char *buf) { - struct gendisk *disk = to_disk(kobj); - struct disk_attribute *disk_attr = - container_of(attr,struct disk_attribute,attr); - ssize_t ret = -EIO; + struct gendisk *disk = dev_to_disk(dev); - if (disk_attr->show) - ret = disk_attr->show(disk,page); - return ret; + return sprintf(buf, "%d\n", disk->minors); } -static ssize_t disk_attr_store(struct kobject * kobj, struct attribute * attr, - const char *page, size_t count) +static ssize_t disk_removable_show(struct device *dev, + struct device_attribute *attr, char *buf) { - struct gendisk *disk = to_disk(kobj); - struct disk_attribute *disk_attr = - container_of(attr,struct disk_attribute,attr); - ssize_t ret = 0; + struct gendisk *disk = dev_to_disk(dev); - if (disk_attr->store) - ret = disk_attr->store(disk, page, count); - return ret; + return sprintf(buf, "%d\n", + (disk->flags & GENHD_FL_REMOVABLE ? 1 : 0)); } -static struct sysfs_ops disk_sysfs_ops = { - .show = &disk_attr_show, - .store = &disk_attr_store, -}; - -static ssize_t disk_uevent_store(struct gendisk * disk, - const char *buf, size_t count) +static ssize_t disk_size_show(struct device *dev, + struct device_attribute *attr, char *buf) { - kobject_uevent(&disk->kobj, KOBJ_ADD); - return count; -} -static ssize_t disk_dev_read(struct gendisk * disk, char *page) -{ - dev_t base = MKDEV(disk->major, disk->first_minor); - return print_dev_t(page, base); -} -static ssize_t disk_range_read(struct gendisk * disk, char *page) -{ - return sprintf(page, "%d\n", disk->minors); -} -static ssize_t disk_removable_read(struct gendisk * disk, char *page) -{ - return sprintf(page, "%d\n", - (disk->flags & GENHD_FL_REMOVABLE ? 1 : 0)); + struct gendisk *disk = dev_to_disk(dev); + return sprintf(buf, "%llu\n", (unsigned long long)get_capacity(disk)); } -static ssize_t disk_size_read(struct gendisk * disk, char *page) -{ - return sprintf(page, "%llu\n", (unsigned long long)get_capacity(disk)); -} -static ssize_t disk_capability_read(struct gendisk *disk, char *page) + +static ssize_t disk_capability_show(struct device *dev, + struct device_attribute *attr, char *buf) { - return sprintf(page, "%x\n", disk->flags); + struct gendisk *disk = dev_to_disk(dev); + + return sprintf(buf, "%x\n", disk->flags); } -static ssize_t disk_stats_read(struct gendisk * disk, char *page) + +static ssize_t disk_stat_show(struct device *dev, + struct device_attribute *attr, char *buf) { + struct gendisk *disk = dev_to_disk(dev); + preempt_disable(); disk_round_stats(disk); preempt_enable(); - return sprintf(page, + return sprintf(buf, "%8lu %8lu %8llu %8u " "%8lu %8lu %8llu %8u " "%8u %8u %8u" @@ -445,40 +429,21 @@ static ssize_t disk_stats_read(struct gendisk * disk, char *page) jiffies_to_msecs(disk_stat_read(disk, io_ticks)), jiffies_to_msecs(disk_stat_read(disk, time_in_queue))); } -static struct disk_attribute disk_attr_uevent = { - .attr = {.name = "uevent", .mode = S_IWUSR }, - .store = disk_uevent_store -}; -static struct disk_attribute disk_attr_dev = { - .attr = {.name = "dev", .mode = S_IRUGO }, - .show = disk_dev_read -}; -static struct disk_attribute disk_attr_range = { - .attr = {.name = "range", .mode = S_IRUGO }, - .show = disk_range_read -}; -static struct disk_attribute disk_attr_removable = { - .attr = {.name = "removable", .mode = S_IRUGO }, - .show = disk_removable_read -}; -static struct disk_attribute disk_attr_size = { - .attr = {.name = "size", .mode = S_IRUGO }, - .show = disk_size_read -}; -static struct disk_attribute disk_attr_capability = { - .attr = {.name = "capability", .mode = S_IRUGO }, - .show = disk_capability_read -}; -static struct disk_attribute disk_attr_stat = { - .attr = {.name = "stat", .mode = S_IRUGO }, - .show = disk_stats_read -}; #ifdef CONFIG_FAIL_MAKE_REQUEST +static ssize_t disk_fail_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct gendisk *disk = dev_to_disk(dev); + + return sprintf(buf, "%d\n", disk->flags & GENHD_FL_FAIL ? 1 : 0); +} -static ssize_t disk_fail_store(struct gendisk * disk, +static ssize_t disk_fail_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) { + struct gendisk *disk = dev_to_disk(dev); int i; if (count > 0 && sscanf(buf, "%d", &i) > 0) { @@ -490,134 +455,100 @@ static ssize_t disk_fail_store(struct gendisk * disk, return count; } -static ssize_t disk_fail_read(struct gendisk * disk, char *page) -{ - return sprintf(page, "%d\n", disk->flags & GENHD_FL_FAIL ? 1 : 0); -} -static struct disk_attribute disk_attr_fail = { - .attr = {.name = "make-it-fail", .mode = S_IRUGO | S_IWUSR }, - .store = disk_fail_store, - .show = disk_fail_read -}; #endif -static struct attribute * default_attrs[] = { - &disk_attr_uevent.attr, - &disk_attr_dev.attr, - &disk_attr_range.attr, - &disk_attr_removable.attr, - &disk_attr_size.attr, - &disk_attr_stat.attr, - &disk_attr_capability.attr, +static DEVICE_ATTR(range, S_IRUGO, disk_range_show, NULL); +static DEVICE_ATTR(removable, S_IRUGO, disk_removable_show, NULL); +static DEVICE_ATTR(size, S_IRUGO, disk_size_show, NULL); +static DEVICE_ATTR(capability, S_IRUGO, disk_capability_show, NULL); +static DEVICE_ATTR(stat, S_IRUGO, disk_stat_show, NULL); #ifdef CONFIG_FAIL_MAKE_REQUEST - &disk_attr_fail.attr, +static struct device_attribute dev_attr_fail = + __ATTR(make-it-fail, S_IRUGO|S_IWUSR, disk_fail_show, disk_fail_store); #endif - NULL, + +static struct attribute *disk_attrs[] = { + &dev_attr_range.attr, + &dev_attr_removable.attr, + &dev_attr_size.attr, + &dev_attr_capability.attr, + &dev_attr_stat.attr, +#ifdef CONFIG_FAIL_MAKE_REQUEST + &dev_attr_fail.attr, +#endif + NULL +}; + +static struct attribute_group disk_attr_group = { + .attrs = disk_attrs, +}; + +static struct attribute_group *disk_attr_groups[] = { + &disk_attr_group, + NULL }; -static void disk_release(struct kobject * kobj) +static void disk_release(struct device *dev) { - struct gendisk *disk = to_disk(kobj); + struct gendisk *disk = dev_to_disk(dev); + kfree(disk->random); kfree(disk->part); free_disk_stats(disk); kfree(disk); } - -static struct kobj_type ktype_block = { - .release = disk_release, - .sysfs_ops = &disk_sysfs_ops, - .default_attrs = default_attrs, +struct class block_class = { + .name = "block", }; -extern struct kobj_type ktype_part; - -static int block_uevent_filter(struct kset *kset, struct kobject *kobj) -{ - struct kobj_type *ktype = get_ktype(kobj); - - return ((ktype == &ktype_block) || (ktype == &ktype_part)); -} - -static int block_uevent(struct kset *kset, struct kobject *kobj, - struct kobj_uevent_env *env) -{ - struct kobj_type *ktype = get_ktype(kobj); - struct device *physdev; - struct gendisk *disk; - struct hd_struct *part; - - if (ktype == &ktype_block) { - disk = container_of(kobj, struct gendisk, kobj); - add_uevent_var(env, "MINOR=%u", disk->first_minor); - } else if (ktype == &ktype_part) { - disk = container_of(kobj->parent, struct gendisk, kobj); - part = container_of(kobj, struct hd_struct, kobj); - add_uevent_var(env, "MINOR=%u", - disk->first_minor + part->partno); - } else - return 0; - - add_uevent_var(env, "MAJOR=%u", disk->major); - - /* add physical device, backing this device */ - physdev = disk->driverfs_dev; - if (physdev) { - char *path = kobject_get_path(&physdev->kobj, GFP_KERNEL); - - add_uevent_var(env, "PHYSDEVPATH=%s", path); - kfree(path); - - if (physdev->bus) - add_uevent_var(env, "PHYSDEVBUS=%s", physdev->bus->name); - - if (physdev->driver) - add_uevent_var(env, physdev->driver->name); - } - - return 0; -} - -static struct kset_uevent_ops block_uevent_ops = { - .filter = block_uevent_filter, - .uevent = block_uevent, +struct device_type disk_type = { + .name = "disk", + .groups = disk_attr_groups, + .release = disk_release, }; /* * aggregate disk stat collector. Uses the same stats that the sysfs * entries do, above, but makes them available through one seq_file. - * Watching a few disks may be efficient through sysfs, but watching - * all of them will be more efficient through this interface. * * The output looks suspiciously like /proc/partitions with a bunch of * extra fields. */ -/* iterator */ static void *diskstats_start(struct seq_file *part, loff_t *pos) { loff_t k = *pos; - struct list_head *p; + struct device *dev; - mutex_lock(&block_subsys_lock); - list_for_each(p, &block_kset->list) + mutex_lock(&block_class_lock); + list_for_each_entry(dev, &block_class.devices, node) { + if (dev->type != &disk_type) + continue; if (!k--) - return list_entry(p, struct gendisk, kobj.entry); + return dev_to_disk(dev); + } return NULL; } static void *diskstats_next(struct seq_file *part, void *v, loff_t *pos) { - struct list_head *p = ((struct gendisk *)v)->kobj.entry.next; + struct gendisk *gp = v; + struct device *dev; + ++*pos; - return p==&block_kset->list ? NULL : - list_entry(p, struct gendisk, kobj.entry); + list_for_each_entry(dev, &gp->dev.node, node) { + if (&dev->node == &block_class.devices) + return NULL; + if (dev->type == &disk_type) + return dev_to_disk(dev); + } + return NULL; } static void diskstats_stop(struct seq_file *part, void *v) { - mutex_unlock(&block_subsys_lock); + mutex_unlock(&block_class_lock); } static int diskstats_show(struct seq_file *s, void *v) @@ -627,7 +558,7 @@ static int diskstats_show(struct seq_file *s, void *v) int n = 0; /* - if (&sgp->kobj.entry == block_kset->list.next) + if (&gp->dev.kobj.entry == block_class.devices.next) seq_puts(s, "major minor name" " rio rmerge rsect ruse wio wmerge " "wsect wuse running use aveq" @@ -681,7 +612,7 @@ static void media_change_notify_thread(struct work_struct *work) * set enviroment vars to indicate which event this is for * so that user space will know to go check the media status. */ - kobject_uevent_env(&gd->kobj, KOBJ_CHANGE, envp); + kobject_uevent_env(&gd->dev.kobj, KOBJ_CHANGE, envp); put_device(gd->driverfs_dev); } @@ -692,6 +623,25 @@ void genhd_media_change_notify(struct gendisk *disk) } EXPORT_SYMBOL_GPL(genhd_media_change_notify); +dev_t blk_lookup_devt(const char *name) +{ + struct device *dev; + dev_t devt = MKDEV(0, 0); + + mutex_lock(&block_class_lock); + list_for_each_entry(dev, &block_class.devices, node) { + if (strcmp(dev->bus_id, name) == 0) { + devt = dev->devt; + break; + } + } + mutex_unlock(&block_class_lock); + + return devt; +} + +EXPORT_SYMBOL(blk_lookup_devt); + struct gendisk *alloc_disk(int minors) { return alloc_disk_node(minors, -1); @@ -719,10 +669,10 @@ struct gendisk *alloc_disk_node(int minors, int node_id) } } disk->minors = minors; - disk->kobj.kset = block_kset; - disk->kobj.ktype = &ktype_block; - kobject_init(&disk->kobj); rand_initialize_disk(disk); + disk->dev.class = &block_class; + disk->dev.type = &disk_type; + device_initialize(&disk->dev); INIT_WORK(&disk->async_notify, media_change_notify_thread); } @@ -742,7 +692,7 @@ struct kobject *get_disk(struct gendisk *disk) owner = disk->fops->owner; if (owner && !try_module_get(owner)) return NULL; - kobj = kobject_get(&disk->kobj); + kobj = kobject_get(&disk->dev.kobj); if (kobj == NULL) { module_put(owner); return NULL; @@ -756,7 +706,7 @@ EXPORT_SYMBOL(get_disk); void put_disk(struct gendisk *disk) { if (disk) - kobject_put(&disk->kobj); + kobject_put(&disk->dev.kobj); } EXPORT_SYMBOL(put_disk); diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c index 8b919940b2ab..3887b2a33ed0 100644 --- a/block/ll_rw_blk.c +++ b/block/ll_rw_blk.c @@ -4182,7 +4182,7 @@ int blk_register_queue(struct gendisk *disk) if (!q || !q->request_fn) return -ENXIO; - q->kobj.parent = kobject_get(&disk->kobj); + q->kobj.parent = kobject_get(&disk->dev.kobj); ret = kobject_add(&q->kobj); if (ret < 0) @@ -4209,6 +4209,6 @@ void blk_unregister_queue(struct gendisk *disk) kobject_uevent(&q->kobj, KOBJ_REMOVE); kobject_del(&q->kobj); - kobject_put(&disk->kobj); + kobject_put(&disk->dev.kobj); } } diff --git a/drivers/base/class.c b/drivers/base/class.c index ba6745b0fd2f..624b3316e938 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -17,6 +17,7 @@ #include #include #include +#include #include "base.h" #define to_class_attr(_attr) container_of(_attr, struct class_attribute, attr) @@ -149,7 +150,13 @@ int class_register(struct class * cls) if (error) return error; +#ifdef CONFIG_SYSFS_DEPRECATED + /* let the block class directory show up in the root of sysfs */ + if (cls != &block_class) + cls->subsys.kobj.kset = class_kset; +#else cls->subsys.kobj.kset = class_kset; +#endif cls->subsys.kobj.ktype = &class_ktype; error = kset_register(&cls->subsys); diff --git a/drivers/base/core.c b/drivers/base/core.c index 13cae18936c5..06e8738ab263 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -671,14 +671,15 @@ static int device_add_class_symlinks(struct device *dev) #ifdef CONFIG_SYSFS_DEPRECATED /* stacked class devices need a symlink in the class directory */ - if (dev->kobj.parent != &dev->class->subsys.kobj) { + if (dev->kobj.parent != &dev->class->subsys.kobj && + dev->type != &part_type) { error = sysfs_create_link(&dev->class->subsys.kobj, &dev->kobj, dev->bus_id); if (error) goto out_subsys; } - if (dev->parent) { + if (dev->parent && dev->type != &part_type) { struct device *parent = dev->parent; char *class_name; @@ -707,10 +708,11 @@ static int device_add_class_symlinks(struct device *dev) return 0; out_device: - if (dev->parent) + if (dev->parent && dev->type != &part_type) sysfs_remove_link(&dev->kobj, "device"); out_busid: - if (dev->kobj.parent != &dev->class->subsys.kobj) + if (dev->kobj.parent != &dev->class->subsys.kobj && + dev->type != &part_type) sysfs_remove_link(&dev->class->subsys.kobj, dev->bus_id); #else /* link in the class directory pointing to the device */ @@ -719,7 +721,7 @@ out_busid: if (error) goto out_subsys; - if (dev->parent) { + if (dev->parent && dev->type != &part_type) { error = sysfs_create_link(&dev->kobj, &dev->parent->kobj, "device"); if (error) @@ -743,7 +745,7 @@ static void device_remove_class_symlinks(struct device *dev) return; #ifdef CONFIG_SYSFS_DEPRECATED - if (dev->parent) { + if (dev->parent && dev->type != &part_type) { char *class_name; class_name = make_class_name(dev->class->name, &dev->kobj); @@ -754,10 +756,11 @@ static void device_remove_class_symlinks(struct device *dev) sysfs_remove_link(&dev->kobj, "device"); } - if (dev->kobj.parent != &dev->class->subsys.kobj) + if (dev->kobj.parent != &dev->class->subsys.kobj && + dev->type != &part_type) sysfs_remove_link(&dev->class->subsys.kobj, dev->bus_id); #else - if (dev->parent) + if (dev->parent && dev->type != &part_type) sysfs_remove_link(&dev->kobj, "device"); sysfs_remove_link(&dev->class->subsys.kobj, dev->bus_id); @@ -925,6 +928,7 @@ struct device * get_device(struct device * dev) */ void put_device(struct device * dev) { + /* might_sleep(); */ if (dev) kobject_put(&dev->kobj); } diff --git a/drivers/block/aoe/aoeblk.c b/drivers/block/aoe/aoeblk.c index ad00b3d94711..826d12381e21 100644 --- a/drivers/block/aoe/aoeblk.c +++ b/drivers/block/aoe/aoeblk.c @@ -15,8 +15,10 @@ static struct kmem_cache *buf_pool_cache; -static ssize_t aoedisk_show_state(struct gendisk * disk, char *page) +static ssize_t aoedisk_show_state(struct device *dev, + struct device_attribute *attr, char *page) { + struct gendisk *disk = dev_to_disk(dev); struct aoedev *d = disk->private_data; return snprintf(page, PAGE_SIZE, @@ -26,50 +28,47 @@ static ssize_t aoedisk_show_state(struct gendisk * disk, char *page) (d->nopen && !(d->flags & DEVFL_UP)) ? ",closewait" : ""); /* I'd rather see nopen exported so we can ditch closewait */ } -static ssize_t aoedisk_show_mac(struct gendisk * disk, char *page) +static ssize_t aoedisk_show_mac(struct device *dev, + struct device_attribute *attr, char *page) { + struct gendisk *disk = dev_to_disk(dev); struct aoedev *d = disk->private_data; return snprintf(page, PAGE_SIZE, "%012llx\n", (unsigned long long)mac_addr(d->addr)); } -static ssize_t aoedisk_show_netif(struct gendisk * disk, char *page) +static ssize_t aoedisk_show_netif(struct device *dev, + struct device_attribute *attr, char *page) { + struct gendisk *disk = dev_to_disk(dev); struct aoedev *d = disk->private_data; return snprintf(page, PAGE_SIZE, "%s\n", d->ifp->name); } /* firmware version */ -static ssize_t aoedisk_show_fwver(struct gendisk * disk, char *page) +static ssize_t aoedisk_show_fwver(struct device *dev, + struct device_attribute *attr, char *page) { + struct gendisk *disk = dev_to_disk(dev); struct aoedev *d = disk->private_data; return snprintf(page, PAGE_SIZE, "0x%04x\n", (unsigned int) d->fw_ver); } -static struct disk_attribute disk_attr_state = { - .attr = {.name = "state", .mode = S_IRUGO }, - .show = aoedisk_show_state -}; -static struct disk_attribute disk_attr_mac = { - .attr = {.name = "mac", .mode = S_IRUGO }, - .show = aoedisk_show_mac -}; -static struct disk_attribute disk_attr_netif = { - .attr = {.name = "netif", .mode = S_IRUGO }, - .show = aoedisk_show_netif -}; -static struct disk_attribute disk_attr_fwver = { - .attr = {.name = "firmware-version", .mode = S_IRUGO }, - .show = aoedisk_show_fwver +static DEVICE_ATTR(state, S_IRUGO, aoedisk_show_state, NULL); +static DEVICE_ATTR(mac, S_IRUGO, aoedisk_show_mac, NULL); +static DEVICE_ATTR(netif, S_IRUGO, aoedisk_show_netif, NULL); +static struct device_attribute dev_attr_firmware_version = { + .attr = { .name = "firmware-version", .mode = S_IRUGO, .owner = THIS_MODULE }, + .show = aoedisk_show_fwver, }; static struct attribute *aoe_attrs[] = { - &disk_attr_state.attr, - &disk_attr_mac.attr, - &disk_attr_netif.attr, - &disk_attr_fwver.attr, - NULL + &dev_attr_state.attr, + &dev_attr_mac.attr, + &dev_attr_netif.attr, + &dev_attr_firmware_version.attr, + NULL, }; static const struct attribute_group attr_group = { @@ -79,12 +78,12 @@ static const struct attribute_group attr_group = { static int aoedisk_add_sysfs(struct aoedev *d) { - return sysfs_create_group(&d->gd->kobj, &attr_group); + return sysfs_create_group(&d->gd->dev.kobj, &attr_group); } void aoedisk_rm_sysfs(struct aoedev *d) { - sysfs_remove_group(&d->gd->kobj, &attr_group); + sysfs_remove_group(&d->gd->dev.kobj, &attr_group); } static int diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index b4c0888aedc3..ba9b17e507e0 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -375,14 +375,17 @@ harderror: return NULL; } -static ssize_t pid_show(struct gendisk *disk, char *page) +static ssize_t pid_show(struct device *dev, + struct device_attribute *attr, char *buf) { - return sprintf(page, "%ld\n", + struct gendisk *disk = dev_to_disk(dev); + + return sprintf(buf, "%ld\n", (long) ((struct nbd_device *)disk->private_data)->pid); } -static struct disk_attribute pid_attr = { - .attr = { .name = "pid", .mode = S_IRUGO }, +static struct device_attribute pid_attr = { + .attr = { .name = "pid", .mode = S_IRUGO, .owner = THIS_MODULE }, .show = pid_show, }; @@ -394,7 +397,7 @@ static int nbd_do_it(struct nbd_device *lo) BUG_ON(lo->magic != LO_MAGIC); lo->pid = current->pid; - ret = sysfs_create_file(&lo->disk->kobj, &pid_attr.attr); + ret = sysfs_create_file(&lo->disk->dev.kobj, &pid_attr.attr); if (ret) { printk(KERN_ERR "nbd: sysfs_create_file failed!"); return ret; @@ -403,7 +406,7 @@ static int nbd_do_it(struct nbd_device *lo) while ((req = nbd_read_stat(lo)) != NULL) nbd_end_request(req); - sysfs_remove_file(&lo->disk->kobj, &pid_attr.attr); + sysfs_remove_file(&lo->disk->dev.kobj, &pid_attr.attr); return 0; } diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 2994523be7bf..0cb3d2bb3ab9 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1173,7 +1173,7 @@ static struct kobject *exact_match(dev_t dev, int *part, void *data) { struct gendisk *p = data; *part &= (1 << PARTN_BITS) - 1; - return &p->kobj; + return &p->dev.kobj; } static int exact_lock(dev_t dev, void *data) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 88c0fd657825..f2d24eb3208c 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1109,7 +1109,7 @@ static void event_callback(void *context) list_splice_init(&md->uevent_list, &uevents); spin_unlock_irqrestore(&md->uevent_lock, flags); - dm_send_uevents(&uevents, &md->disk->kobj); + dm_send_uevents(&uevents, &md->disk->dev.kobj); atomic_inc(&md->event_nr); wake_up(&md->eventq); @@ -1530,7 +1530,7 @@ out: *---------------------------------------------------------------*/ void dm_kobject_uevent(struct mapped_device *md) { - kobject_uevent(&md->disk->kobj, KOBJ_CHANGE); + kobject_uevent(&md->disk->dev.kobj, KOBJ_CHANGE); } uint32_t dm_next_uevent_seq(struct mapped_device *md) diff --git a/drivers/md/md.c b/drivers/md/md.c index c5030863d004..f79efb359215 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1396,9 +1396,9 @@ static int bind_rdev_to_array(mdk_rdev_t * rdev, mddev_t * mddev) goto fail; if (rdev->bdev->bd_part) - ko = &rdev->bdev->bd_part->kobj; + ko = &rdev->bdev->bd_part->dev.kobj; else - ko = &rdev->bdev->bd_disk->kobj; + ko = &rdev->bdev->bd_disk->dev.kobj; if ((err = sysfs_create_link(&rdev->kobj, ko, "block"))) { kobject_del(&rdev->kobj); goto fail; @@ -3083,7 +3083,7 @@ static struct kobject *md_probe(dev_t dev, int *part, void *data) add_disk(disk); mddev->gendisk = disk; mutex_unlock(&disks_mutex); - error = kobject_init_and_add(&mddev->kobj, &md_ktype, &disk->kobj, + error = kobject_init_and_add(&mddev->kobj, &md_ktype, &disk->dev.kobj, "%s", "md"); if (error) printk(KERN_WARNING "md: cannot register %s/md - name in use\n", @@ -3361,7 +3361,7 @@ static int do_md_run(mddev_t * mddev) mddev->changed = 1; md_new_event(mddev); - kobject_uevent(&mddev->gendisk->kobj, KOBJ_CHANGE); + kobject_uevent(&mddev->gendisk->dev.kobj, KOBJ_CHANGE); return 0; } diff --git a/fs/block_dev.c b/fs/block_dev.c index 993f78c55221..e48a630ae266 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -738,9 +738,9 @@ EXPORT_SYMBOL(bd_release); static struct kobject *bdev_get_kobj(struct block_device *bdev) { if (bdev->bd_contains != bdev) - return kobject_get(&bdev->bd_part->kobj); + return kobject_get(&bdev->bd_part->dev.kobj); else - return kobject_get(&bdev->bd_disk->kobj); + return kobject_get(&bdev->bd_disk->dev.kobj); } static struct kobject *bdev_get_holder(struct block_device *bdev) @@ -1176,7 +1176,7 @@ static int do_open(struct block_device *bdev, struct file *file, int for_part) ret = -ENXIO; goto out_first; } - kobject_get(&p->kobj); + kobject_get(&p->dev.kobj); bdev->bd_part = p; bd_set_size(bdev, (loff_t) p->nr_sects << 9); } @@ -1299,7 +1299,7 @@ static int __blkdev_put(struct block_device *bdev, int for_part) module_put(owner); if (bdev->bd_contains != bdev) { - kobject_put(&bdev->bd_part->kobj); + kobject_put(&bdev->bd_part->dev.kobj); bdev->bd_part = NULL; } bdev->bd_disk = NULL; diff --git a/fs/partitions/check.c b/fs/partitions/check.c index 9184215f3ef3..97f3f5f064ee 100644 --- a/fs/partitions/check.c +++ b/fs/partitions/check.c @@ -195,96 +195,45 @@ check_partition(struct gendisk *hd, struct block_device *bdev) return ERR_PTR(res); } -/* - * sysfs bindings for partitions - */ - -struct part_attribute { - struct attribute attr; - ssize_t (*show)(struct hd_struct *,char *); - ssize_t (*store)(struct hd_struct *,const char *, size_t); -}; - -static ssize_t -part_attr_show(struct kobject * kobj, struct attribute * attr, char * page) +static ssize_t part_start_show(struct device *dev, + struct device_attribute *attr, char *buf) { - struct hd_struct * p = container_of(kobj,struct hd_struct,kobj); - struct part_attribute * part_attr = container_of(attr,struct part_attribute,attr); - ssize_t ret = 0; - if (part_attr->show) - ret = part_attr->show(p, page); - return ret; -} -static ssize_t -part_attr_store(struct kobject * kobj, struct attribute * attr, - const char *page, size_t count) -{ - struct hd_struct * p = container_of(kobj,struct hd_struct,kobj); - struct part_attribute * part_attr = container_of(attr,struct part_attribute,attr); - ssize_t ret = 0; + struct hd_struct *p = dev_to_part(dev); - if (part_attr->store) - ret = part_attr->store(p, page, count); - return ret; + return sprintf(buf, "%llu\n",(unsigned long long)p->start_sect); } -static struct sysfs_ops part_sysfs_ops = { - .show = part_attr_show, - .store = part_attr_store, -}; - -static ssize_t part_uevent_store(struct hd_struct * p, - const char *page, size_t count) +static ssize_t part_size_show(struct device *dev, + struct device_attribute *attr, char *buf) { - kobject_uevent(&p->kobj, KOBJ_ADD); - return count; + struct hd_struct *p = dev_to_part(dev); + return sprintf(buf, "%llu\n",(unsigned long long)p->nr_sects); } -static ssize_t part_dev_read(struct hd_struct * p, char *page) -{ - struct gendisk *disk = container_of(p->kobj.parent,struct gendisk,kobj); - dev_t dev = MKDEV(disk->major, disk->first_minor + p->partno); - return print_dev_t(page, dev); -} -static ssize_t part_start_read(struct hd_struct * p, char *page) -{ - return sprintf(page, "%llu\n",(unsigned long long)p->start_sect); -} -static ssize_t part_size_read(struct hd_struct * p, char *page) -{ - return sprintf(page, "%llu\n",(unsigned long long)p->nr_sects); -} -static ssize_t part_stat_read(struct hd_struct * p, char *page) + +static ssize_t part_stat_show(struct device *dev, + struct device_attribute *attr, char *buf) { - return sprintf(page, "%8u %8llu %8u %8llu\n", + struct hd_struct *p = dev_to_part(dev); + + return sprintf(buf, "%8u %8llu %8u %8llu\n", p->ios[0], (unsigned long long)p->sectors[0], p->ios[1], (unsigned long long)p->sectors[1]); } -static struct part_attribute part_attr_uevent = { - .attr = {.name = "uevent", .mode = S_IWUSR }, - .store = part_uevent_store -}; -static struct part_attribute part_attr_dev = { - .attr = {.name = "dev", .mode = S_IRUGO }, - .show = part_dev_read -}; -static struct part_attribute part_attr_start = { - .attr = {.name = "start", .mode = S_IRUGO }, - .show = part_start_read -}; -static struct part_attribute part_attr_size = { - .attr = {.name = "size", .mode = S_IRUGO }, - .show = part_size_read -}; -static struct part_attribute part_attr_stat = { - .attr = {.name = "stat", .mode = S_IRUGO }, - .show = part_stat_read -}; #ifdef CONFIG_FAIL_MAKE_REQUEST +static ssize_t part_fail_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct hd_struct *p = dev_to_part(dev); -static ssize_t part_fail_store(struct hd_struct * p, + return sprintf(buf, "%d\n", p->make_it_fail); +} + +static ssize_t part_fail_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) { + struct hd_struct *p = dev_to_part(dev); int i; if (count > 0 && sscanf(buf, "%d", &i) > 0) @@ -292,49 +241,52 @@ static ssize_t part_fail_store(struct hd_struct * p, return count; } -static ssize_t part_fail_read(struct hd_struct * p, char *page) -{ - return sprintf(page, "%d\n", p->make_it_fail); -} -static struct part_attribute part_attr_fail = { - .attr = {.name = "make-it-fail", .mode = S_IRUGO | S_IWUSR }, - .store = part_fail_store, - .show = part_fail_read -}; +#endif +static DEVICE_ATTR(start, S_IRUGO, part_start_show, NULL); +static DEVICE_ATTR(size, S_IRUGO, part_size_show, NULL); +static DEVICE_ATTR(stat, S_IRUGO, part_stat_show, NULL); +#ifdef CONFIG_FAIL_MAKE_REQUEST +static struct device_attribute dev_attr_fail = + __ATTR(make-it-fail, S_IRUGO|S_IWUSR, part_fail_show, part_fail_store); #endif -static struct attribute * default_attrs[] = { - &part_attr_uevent.attr, - &part_attr_dev.attr, - &part_attr_start.attr, - &part_attr_size.attr, - &part_attr_stat.attr, +static struct attribute *part_attrs[] = { + &dev_attr_start.attr, + &dev_attr_size.attr, + &dev_attr_stat.attr, #ifdef CONFIG_FAIL_MAKE_REQUEST - &part_attr_fail.attr, + &dev_attr_fail.attr, #endif - NULL, + NULL }; -extern struct kset *block_kset; +static struct attribute_group part_attr_group = { + .attrs = part_attrs, +}; -static void part_release(struct kobject *kobj) +static struct attribute_group *part_attr_groups[] = { + &part_attr_group, + NULL +}; + +static void part_release(struct device *dev) { - struct hd_struct * p = container_of(kobj,struct hd_struct,kobj); + struct hd_struct *p = dev_to_part(dev); kfree(p); } -struct kobj_type ktype_part = { +struct device_type part_type = { + .name = "partition", + .groups = part_attr_groups, .release = part_release, - .default_attrs = default_attrs, - .sysfs_ops = &part_sysfs_ops, }; static inline void partition_sysfs_add_subdir(struct hd_struct *p) { struct kobject *k; - k = kobject_get(&p->kobj); + k = kobject_get(&p->dev.kobj); p->holder_dir = kobject_create_and_add("holders", k); kobject_put(k); } @@ -343,7 +295,7 @@ static inline void disk_sysfs_add_subdirs(struct gendisk *disk) { struct kobject *k; - k = kobject_get(&disk->kobj); + k = kobject_get(&disk->dev.kobj); disk->holder_dir = kobject_create_and_add("holders", k); disk->slave_dir = kobject_create_and_add("slaves", k); kobject_put(k); @@ -352,6 +304,7 @@ static inline void disk_sysfs_add_subdirs(struct gendisk *disk) void delete_partition(struct gendisk *disk, int part) { struct hd_struct *p = disk->part[part-1]; + if (!p) return; if (!p->nr_sects) @@ -361,113 +314,55 @@ void delete_partition(struct gendisk *disk, int part) p->nr_sects = 0; p->ios[0] = p->ios[1] = 0; p->sectors[0] = p->sectors[1] = 0; - sysfs_remove_link(&p->kobj, "subsystem"); kobject_unregister(p->holder_dir); - kobject_uevent(&p->kobj, KOBJ_REMOVE); - kobject_del(&p->kobj); - kobject_put(&p->kobj); + device_del(&p->dev); + put_device(&p->dev); } void add_partition(struct gendisk *disk, int part, sector_t start, sector_t len, int flags) { struct hd_struct *p; + int err; p = kzalloc(sizeof(*p), GFP_KERNEL); if (!p) return; - + p->start_sect = start; p->nr_sects = len; p->partno = part; p->policy = disk->policy; - if (isdigit(disk->kobj.k_name[strlen(disk->kobj.k_name)-1])) - kobject_set_name(&p->kobj, "%sp%d", - kobject_name(&disk->kobj), part); + if (isdigit(disk->dev.bus_id[strlen(disk->dev.bus_id)-1])) + snprintf(p->dev.bus_id, BUS_ID_SIZE, + "%sp%d", disk->dev.bus_id, part); else - kobject_set_name(&p->kobj, "%s%d", - kobject_name(&disk->kobj),part); - p->kobj.parent = &disk->kobj; - p->kobj.ktype = &ktype_part; - kobject_init(&p->kobj); - kobject_add(&p->kobj); - if (!disk->part_uevent_suppress) - kobject_uevent(&p->kobj, KOBJ_ADD); - sysfs_create_link(&p->kobj, &block_kset->kobj, "subsystem"); + snprintf(p->dev.bus_id, BUS_ID_SIZE, + "%s%d", disk->dev.bus_id, part); + + device_initialize(&p->dev); + p->dev.devt = MKDEV(disk->major, disk->first_minor + part); + p->dev.class = &block_class; + p->dev.type = &part_type; + p->dev.parent = &disk->dev; + disk->part[part-1] = p; + + /* delay uevent until 'holders' subdir is created */ + p->dev.uevent_suppress = 1; + device_add(&p->dev); + partition_sysfs_add_subdir(p); + p->dev.uevent_suppress = 0; if (flags & ADDPART_FLAG_WHOLEDISK) { static struct attribute addpartattr = { .name = "whole_disk", .mode = S_IRUSR | S_IRGRP | S_IROTH, }; - - sysfs_create_file(&p->kobj, &addpartattr); + err = sysfs_create_file(&p->dev.kobj, &addpartattr); } - partition_sysfs_add_subdir(p); - disk->part[part-1] = p; -} -static char *make_block_name(struct gendisk *disk) -{ - char *name; - static char *block_str = "block:"; - int size; - char *s; - - size = strlen(block_str) + strlen(disk->disk_name) + 1; - name = kmalloc(size, GFP_KERNEL); - if (!name) - return NULL; - strcpy(name, block_str); - strcat(name, disk->disk_name); - /* ewww... some of these buggers have / in name... */ - s = strchr(name, '/'); - if (s) - *s = '!'; - return name; -} - -static int disk_sysfs_symlinks(struct gendisk *disk) -{ - struct device *target = get_device(disk->driverfs_dev); - int err; - char *disk_name = NULL; - - if (target) { - disk_name = make_block_name(disk); - if (!disk_name) { - err = -ENOMEM; - goto err_out; - } - - err = sysfs_create_link(&disk->kobj, &target->kobj, "device"); - if (err) - goto err_out_disk_name; - - err = sysfs_create_link(&target->kobj, &disk->kobj, disk_name); - if (err) - goto err_out_dev_link; - } - - err = sysfs_create_link(&disk->kobj, &block_kset->kobj, - "subsystem"); - if (err) - goto err_out_disk_name_lnk; - - kfree(disk_name); - - return 0; - -err_out_disk_name_lnk: - if (target) { - sysfs_remove_link(&target->kobj, disk_name); -err_out_dev_link: - sysfs_remove_link(&disk->kobj, "device"); -err_out_disk_name: - kfree(disk_name); -err_out: - put_device(target); - } - return err; + /* suppress uevent if the disk supresses it */ + if (!disk->dev.uevent_suppress) + kobject_uevent(&p->dev.kobj, KOBJ_ADD); } /* Not exported, helper to add_disk(). */ @@ -479,19 +374,29 @@ void register_disk(struct gendisk *disk) struct hd_struct *p; int err; - kobject_set_name(&disk->kobj, "%s", disk->disk_name); - /* ewww... some of these buggers have / in name... */ - s = strchr(disk->kobj.k_name, '/'); + disk->dev.parent = disk->driverfs_dev; + disk->dev.devt = MKDEV(disk->major, disk->first_minor); + + strlcpy(disk->dev.bus_id, disk->disk_name, KOBJ_NAME_LEN); + /* ewww... some of these buggers have / in the name... */ + s = strchr(disk->dev.bus_id, '/'); if (s) *s = '!'; - if ((err = kobject_add(&disk->kobj))) + + /* delay uevents, until we scanned partition table */ + disk->dev.uevent_suppress = 1; + + if (device_add(&disk->dev)) return; - err = disk_sysfs_symlinks(disk); +#ifndef CONFIG_SYSFS_DEPRECATED + err = sysfs_create_link(block_depr, &disk->dev.kobj, + kobject_name(&disk->dev.kobj)); if (err) { - kobject_del(&disk->kobj); + device_del(&disk->dev); return; } - disk_sysfs_add_subdirs(disk); +#endif + disk_sysfs_add_subdirs(disk); /* No minors to use for partitions */ if (disk->minors == 1) @@ -505,25 +410,23 @@ void register_disk(struct gendisk *disk) if (!bdev) goto exit; - /* scan partition table, but suppress uevents */ bdev->bd_invalidated = 1; - disk->part_uevent_suppress = 1; err = blkdev_get(bdev, FMODE_READ, 0); - disk->part_uevent_suppress = 0; if (err < 0) goto exit; blkdev_put(bdev); exit: - /* announce disk after possible partitions are already created */ - kobject_uevent(&disk->kobj, KOBJ_ADD); + /* announce disk after possible partitions are created */ + disk->dev.uevent_suppress = 0; + kobject_uevent(&disk->dev.kobj, KOBJ_ADD); /* announce possible partitions */ for (i = 1; i < disk->minors; i++) { p = disk->part[i-1]; if (!p || !p->nr_sects) continue; - kobject_uevent(&p->kobj, KOBJ_ADD); + kobject_uevent(&p->dev.kobj, KOBJ_ADD); } } @@ -602,19 +505,11 @@ void del_gendisk(struct gendisk *disk) disk_stat_set_all(disk, 0); disk->stamp = 0; - kobject_uevent(&disk->kobj, KOBJ_REMOVE); kobject_unregister(disk->holder_dir); kobject_unregister(disk->slave_dir); - if (disk->driverfs_dev) { - char *disk_name = make_block_name(disk); - sysfs_remove_link(&disk->kobj, "device"); - if (disk_name) { - sysfs_remove_link(&disk->driverfs_dev->kobj, disk_name); - kfree(disk_name); - } - put_device(disk->driverfs_dev); - disk->driverfs_dev = NULL; - } - sysfs_remove_link(&disk->kobj, "subsystem"); - kobject_del(&disk->kobj); + disk->driverfs_dev = NULL; +#ifndef CONFIG_SYSFS_DEPRECATED + sysfs_remove_link(block_depr, disk->dev.bus_id); +#endif + device_del(&disk->dev); } diff --git a/include/linux/genhd.h b/include/linux/genhd.h index a47b8025d399..1dbea0ac5693 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -10,9 +10,19 @@ */ #include +#include #ifdef CONFIG_BLOCK +#define kobj_to_dev(k) container_of(k, struct device, kobj) +#define dev_to_disk(device) container_of(device, struct gendisk, dev) +#define dev_to_part(device) container_of(device, struct hd_struct, dev) + +extern struct device_type disk_type; +extern struct device_type part_type; +extern struct kobject *block_depr; +extern struct class block_class; + enum { /* These three have identical behaviour; use the second one if DOS FDISK gets confused about extended/logical partitions starting past cylinder 1023. */ @@ -84,7 +94,7 @@ struct partition { struct hd_struct { sector_t start_sect; sector_t nr_sects; - struct kobject kobj; + struct device dev; struct kobject *holder_dir; unsigned ios[2], sectors[2]; /* READs and WRITEs */ int policy, partno; @@ -117,15 +127,14 @@ struct gendisk { * disks that can't be partitioned. */ char disk_name[32]; /* name of major driver */ struct hd_struct **part; /* [indexed by minor] */ - int part_uevent_suppress; struct block_device_operations *fops; struct request_queue *queue; void *private_data; sector_t capacity; int flags; - struct device *driverfs_dev; - struct kobject kobj; + struct device *driverfs_dev; // FIXME: remove + struct device dev; struct kobject *holder_dir; struct kobject *slave_dir; @@ -143,13 +152,6 @@ struct gendisk { struct work_struct async_notify; }; -/* Structure for sysfs attributes on block devices */ -struct disk_attribute { - struct attribute attr; - ssize_t (*show)(struct gendisk *, char *); - ssize_t (*store)(struct gendisk *, const char *, size_t); -}; - /* * Macros to operate on percpu disk statistics: * @@ -411,7 +413,8 @@ struct unixware_disklabel { #define ADDPART_FLAG_RAID 1 #define ADDPART_FLAG_WHOLEDISK 2 -char *disk_name (struct gendisk *hd, int part, char *buf); +extern dev_t blk_lookup_devt(const char *name); +extern char *disk_name (struct gendisk *hd, int part, char *buf); extern int rescan_partitions(struct gendisk *disk, struct block_device *bdev); extern void add_partition(struct gendisk *, int, sector_t, sector_t, int); @@ -423,12 +426,12 @@ extern struct gendisk *alloc_disk(int minors); extern struct kobject *get_disk(struct gendisk *disk); extern void put_disk(struct gendisk *disk); extern void genhd_media_change_notify(struct gendisk *disk); -extern void blk_register_region(dev_t dev, unsigned long range, +extern void blk_register_region(dev_t devt, unsigned long range, struct module *module, struct kobject *(*probe)(dev_t, int *, void *), int (*lock)(dev_t, void *), void *data); -extern void blk_unregister_region(dev_t dev, unsigned long range); +extern void blk_unregister_region(dev_t devt, unsigned long range); static inline struct block_device *bdget_disk(struct gendisk *disk, int index) { @@ -441,6 +444,12 @@ static inline struct block_device *bdget_disk(struct gendisk *disk, int index) static inline void printk_all_partitions(void) { } +static inline dev_t blk_lookup_devt(const char *name) +{ + dev_t devt = MKDEV(0, 0); + return devt; +} + #endif /* CONFIG_BLOCK */ #endif diff --git a/init/do_mounts.c b/init/do_mounts.c index 4efa1e5385e3..2ae5b8462399 100644 --- a/init/do_mounts.c +++ b/init/do_mounts.c @@ -55,69 +55,6 @@ static int __init readwrite(char *str) __setup("ro", readonly); __setup("rw", readwrite); -static dev_t try_name(char *name, int part) -{ - char path[64]; - char buf[32]; - int range; - dev_t res; - char *s; - int len; - int fd; - unsigned int maj, min; - - /* read device number from .../dev */ - - sprintf(path, "/sys/block/%s/dev", name); - fd = sys_open(path, 0, 0); - if (fd < 0) - goto fail; - len = sys_read(fd, buf, 32); - sys_close(fd); - if (len <= 0 || len == 32 || buf[len - 1] != '\n') - goto fail; - buf[len - 1] = '\0'; - if (sscanf(buf, "%u:%u", &maj, &min) == 2) { - /* - * Try the %u:%u format -- see print_dev_t() - */ - res = MKDEV(maj, min); - if (maj != MAJOR(res) || min != MINOR(res)) - goto fail; - } else { - /* - * Nope. Try old-style "0321" - */ - res = new_decode_dev(simple_strtoul(buf, &s, 16)); - if (*s) - goto fail; - } - - /* if it's there and we are not looking for a partition - that's it */ - if (!part) - return res; - - /* otherwise read range from .../range */ - sprintf(path, "/sys/block/%s/range", name); - fd = sys_open(path, 0, 0); - if (fd < 0) - goto fail; - len = sys_read(fd, buf, 32); - sys_close(fd); - if (len <= 0 || len == 32 || buf[len - 1] != '\n') - goto fail; - buf[len - 1] = '\0'; - range = simple_strtoul(buf, &s, 10); - if (*s) - goto fail; - - /* if partition is within range - we got it */ - if (part < range) - return res + part; -fail: - return 0; -} - /* * Convert a name into device number. We accept the following variants: * @@ -129,12 +66,10 @@ fail: * 5) /dev/p - same as the above, that form is * used when disk name of partitioned disk ends on a digit. * - * If name doesn't have fall into the categories above, we return 0. - * Sysfs is used to check if something is a disk name - it has - * all known disks under bus/block/devices. If the disk name - * contains slashes, name of sysfs node has them replaced with - * bangs. try_name() does the actual checks, assuming that sysfs - * is mounted on rootfs /sys. + * If name doesn't have fall into the categories above, we return (0,0). + * block_class is used to check if something is a disk name. If the disk + * name contains slashes, the device name has them replaced with + * bangs. */ dev_t name_to_dev_t(char *name) @@ -142,13 +77,6 @@ dev_t name_to_dev_t(char *name) char s[32]; char *p; dev_t res = 0; - int part; - -#ifdef CONFIG_SYSFS - int mkdir_err = sys_mkdir("/sys", 0700); - if (sys_mount("sysfs", "/sys", "sysfs", 0, NULL) < 0) - goto out; -#endif if (strncmp(name, "/dev/", 5) != 0) { unsigned maj, min; @@ -164,6 +92,7 @@ dev_t name_to_dev_t(char *name) } goto done; } + name += 5; res = Root_NFS; if (strcmp(name, "nfs") == 0) @@ -178,35 +107,14 @@ dev_t name_to_dev_t(char *name) for (p = s; *p; p++) if (*p == '/') *p = '!'; - res = try_name(s, 0); + res = blk_lookup_devt(s); if (res) goto done; - while (p > s && isdigit(p[-1])) - p--; - if (p == s || !*p || *p == '0') - goto fail; - part = simple_strtoul(p, NULL, 10); - *p = '\0'; - res = try_name(s, part); - if (res) - goto done; - - if (p < s + 2 || !isdigit(p[-2]) || p[-1] != 'p') - goto fail; - p[-1] = '\0'; - res = try_name(s, part); +fail: + return 0; done: -#ifdef CONFIG_SYSFS - sys_umount("/sys", 0); -out: - if (!mkdir_err) - sys_rmdir("/sys"); -#endif return res; -fail: - res = 0; - goto done; } static int __init root_dev_setup(char *line) -- cgit v1.2.3-59-g8ed1b From 29e3dd0df1b9556170ce90484a9d1a2ff9104ea7 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 23:05:35 -0700 Subject: Kobject: convert block/elevator.c to use kobject_init/add_ng() This converts the code to use the new kobject functions, cleaning up the logic in doing so. Cc: Jens Axboe Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- block/elevator.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/block/elevator.c b/block/elevator.c index e452deb80395..5445c3c2ee8a 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -185,9 +185,7 @@ static elevator_t *elevator_alloc(struct request_queue *q, eq->ops = &e->ops; eq->elevator_type = e; - kobject_init(&eq->kobj); - kobject_set_name(&eq->kobj, "%s", "iosched"); - eq->kobj.ktype = &elv_ktype; + kobject_init_ng(&eq->kobj, &elv_ktype); mutex_init(&eq->sysfs_lock); eq->hash = kmalloc_node(sizeof(struct hlist_head) * ELV_HASH_ENTRIES, @@ -931,9 +929,7 @@ int elv_register_queue(struct request_queue *q) elevator_t *e = q->elevator; int error; - e->kobj.parent = &q->kobj; - - error = kobject_add(&e->kobj); + error = kobject_add_ng(&e->kobj, &q->kobj, "%s", "iosched"); if (!error) { struct elv_fs_entry *attr = e->elevator_type->elevator_attrs; if (attr) { -- cgit v1.2.3-59-g8ed1b From d5a379f77bc79c0a78b26f8c0159f55c8b11d68b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 23:05:35 -0700 Subject: Kobject: convert block/ll_rw_blk.c to use kobject_init/add_ng() This converts the code to use the new kobject functions, cleaning up the logic in doing so. Cc: Jens Axboe Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- block/ll_rw_blk.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c index 3887b2a33ed0..8054b7d8e07c 100644 --- a/block/ll_rw_blk.c +++ b/block/ll_rw_blk.c @@ -1862,9 +1862,7 @@ struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id) init_timer(&q->unplug_timer); - kobject_set_name(&q->kobj, "%s", "queue"); - q->kobj.ktype = &queue_ktype; - kobject_init(&q->kobj); + kobject_init_ng(&q->kobj, &queue_ktype); mutex_init(&q->sysfs_lock); @@ -4182,9 +4180,8 @@ int blk_register_queue(struct gendisk *disk) if (!q || !q->request_fn) return -ENXIO; - q->kobj.parent = kobject_get(&disk->dev.kobj); - - ret = kobject_add(&q->kobj); + ret = kobject_add_ng(&q->kobj, kobject_get(&disk->dev.kobj), + "%s", "queue"); if (ret < 0) return ret; -- cgit v1.2.3-59-g8ed1b From 649316b25b148e57c8ef71748fc69fa6db276ad1 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 23:05:35 -0700 Subject: Kobject: convert drivers/md/md.c to use kobject_init/add_ng() This converts the code to use the new kobject functions, cleaning up the logic in doing so. Cc: Neil Brown Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/md/md.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index f79efb359215..7ae9740c483d 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1383,16 +1383,13 @@ static int bind_rdev_to_array(mdk_rdev_t * rdev, mddev_t * mddev) return -EBUSY; } bdevname(rdev->bdev,b); - if (kobject_set_name(&rdev->kobj, "dev-%s", b) < 0) - return -ENOMEM; - while ( (s=strchr(rdev->kobj.k_name, '/')) != NULL) + while ( (s=strchr(b, '/')) != NULL) *s = '!'; - + rdev->mddev = mddev; printk(KERN_INFO "md: bind<%s>\n", b); - rdev->kobj.parent = &mddev->kobj; - if ((err = kobject_add(&rdev->kobj))) + if ((err = kobject_add_ng(&rdev->kobj, &mddev->kobj, "dev-%s", b))) goto fail; if (rdev->bdev->bd_part) @@ -2036,9 +2033,7 @@ static mdk_rdev_t *md_import_device(dev_t newdev, int super_format, int super_mi if (err) goto abort_free; - rdev->kobj.parent = NULL; - rdev->kobj.ktype = &rdev_ktype; - kobject_init(&rdev->kobj); + kobject_init_ng(&rdev->kobj, &rdev_ktype); rdev->desc_nr = -1; rdev->saved_raid_disk = -1; -- cgit v1.2.3-59-g8ed1b From ac3c8141f62f357169980ec21b7be6d29964a394 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 23:05:35 -0700 Subject: Kobject: convert kernel/module.c to use kobject_init/add_ng() This converts the code to use the new kobject functions, cleaning up the logic in doing so. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- kernel/module.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/kernel/module.c b/kernel/module.c index 0ae811785c59..89cd4c7361d8 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -1217,18 +1217,16 @@ int mod_sysfs_init(struct module *mod) err = -EINVAL; goto out; } - memset(&mod->mkobj.kobj, 0, sizeof(mod->mkobj.kobj)); - err = kobject_set_name(&mod->mkobj.kobj, "%s", mod->name); - if (err) - goto out; - mod->mkobj.kobj.kset = module_kset; - mod->mkobj.kobj.ktype = &module_ktype; mod->mkobj.mod = mod; - kobject_init(&mod->mkobj.kobj); + memset(&mod->mkobj.kobj, 0, sizeof(mod->mkobj.kobj)); + mod->mkobj.kobj.kset = module_kset; + err = kobject_init_and_add(&mod->mkobj.kobj, &module_ktype, NULL, + "%s", mod->name); + if (err) + kobject_put(&mod->mkobj.kobj); /* delay uevent until full sysfs population */ - err = kobject_add(&mod->mkobj.kobj); out: return err; } -- cgit v1.2.3-59-g8ed1b From 9e7bbccd0290e720e0874443932869c55f63d5a8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 23:05:35 -0700 Subject: Kobject: remove kobject_add() as no one uses it anymore The old kobject_add() function is on longer in use, so let us remove it from the public scope (kset mess in the kobject.c file still uses it, but that can be cleaned up later very simply.) Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/kobject.h | 1 - lib/kobject.c | 22 ++++++++-------------- 2 files changed, 8 insertions(+), 15 deletions(-) diff --git a/include/linux/kobject.h b/include/linux/kobject.h index bb6868475edb..8b0aa715fa2f 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -80,7 +80,6 @@ static inline const char * kobject_name(const struct kobject * kobj) extern void kobject_init(struct kobject *); extern void kobject_init_ng(struct kobject *kobj, struct kobj_type *ktype); -extern int __must_check kobject_add(struct kobject *); extern int __must_check kobject_add_ng(struct kobject *kobj, struct kobject *parent, const char *fmt, ...); diff --git a/lib/kobject.c b/lib/kobject.c index 493e991abb1b..d04789fa4da9 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -144,7 +144,7 @@ void kobject_init(struct kobject * kobj) * Remove the kobject from the kset list and decrement * its parent's refcount. * This is separated out, so we can use it in both - * kobject_del() and kobject_add() on error. + * kobject_del() and kobject_add_internal() on error. */ static void unlink(struct kobject * kobj) @@ -161,12 +161,7 @@ static void unlink(struct kobject * kobj) kobject_put(parent); } -/** - * kobject_add - add an object to the hierarchy. - * @kobj: object. - */ - -int kobject_add(struct kobject * kobj) +static int kobject_add_internal(struct kobject *kobj) { int error = 0; struct kobject * parent; @@ -215,13 +210,13 @@ int kobject_add(struct kobject * kobj) /* be noisy on error issues */ if (error == -EEXIST) - printk(KERN_ERR "kobject_add failed for %s with " + printk(KERN_ERR "%s failed for %s with " "-EEXIST, don't try to register things with " "the same name in the same directory.\n", - kobject_name(kobj)); + __FUNCTION__, kobject_name(kobj)); else - printk(KERN_ERR "kobject_add failed for %s (%d)\n", - kobject_name(kobj), error); + printk(KERN_ERR "%s failed for %s (%d)\n", + __FUNCTION__, kobject_name(kobj), error); dump_stack(); } @@ -351,7 +346,7 @@ static int kobject_add_varg(struct kobject *kobj, struct kobject *parent, return retval; } kobj->parent = parent; - return kobject_add(kobj); + return kobject_add_internal(kobj); } /** @@ -742,7 +737,7 @@ struct sysfs_ops kobj_sysfs_ops = { int kset_add(struct kset * k) { - return kobject_add(&k->kobj); + return kobject_add_internal(&k->kobj); } @@ -897,7 +892,6 @@ EXPORT_SYMBOL(kobject_register); EXPORT_SYMBOL(kobject_unregister); EXPORT_SYMBOL(kobject_get); EXPORT_SYMBOL(kobject_put); -EXPORT_SYMBOL(kobject_add); EXPORT_SYMBOL(kobject_del); EXPORT_SYMBOL(kset_register); -- cgit v1.2.3-59-g8ed1b From b2d6db5878a0832659ed58476357eea2db915550 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 23:05:35 -0700 Subject: Kobject: rename kobject_add_ng() to kobject_add() Now that the old kobject_add() function is gone, rename kobject_add_ng() to kobject_add() to clean up the namespace. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- block/elevator.c | 2 +- block/ll_rw_blk.c | 4 ++-- drivers/base/class.c | 4 ++-- drivers/base/core.c | 6 +++--- drivers/base/driver.c | 2 +- drivers/md/md.c | 2 +- drivers/net/iseries_veth.c | 2 +- drivers/uio/uio.c | 2 +- include/linux/kobject.h | 6 +++--- lib/kobject.c | 14 +++++++------- 10 files changed, 22 insertions(+), 22 deletions(-) diff --git a/block/elevator.c b/block/elevator.c index 5445c3c2ee8a..645469a4f49f 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -929,7 +929,7 @@ int elv_register_queue(struct request_queue *q) elevator_t *e = q->elevator; int error; - error = kobject_add_ng(&e->kobj, &q->kobj, "%s", "iosched"); + error = kobject_add(&e->kobj, &q->kobj, "%s", "iosched"); if (!error) { struct elv_fs_entry *attr = e->elevator_type->elevator_attrs; if (attr) { diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c index 8054b7d8e07c..234dd3de1824 100644 --- a/block/ll_rw_blk.c +++ b/block/ll_rw_blk.c @@ -4180,8 +4180,8 @@ int blk_register_queue(struct gendisk *disk) if (!q || !q->request_fn) return -ENXIO; - ret = kobject_add_ng(&q->kobj, kobject_get(&disk->dev.kobj), - "%s", "queue"); + ret = kobject_add(&q->kobj, kobject_get(&disk->dev.kobj), + "%s", "queue"); if (ret < 0) return ret; diff --git a/drivers/base/class.c b/drivers/base/class.c index 624b3316e938..8e3cba224384 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -586,8 +586,8 @@ int class_device_add(struct class_device *class_dev) else class_dev->kobj.parent = &parent_class->subsys.kobj; - error = kobject_add_ng(&class_dev->kobj, class_dev->kobj.parent, - "%s", class_dev->class_id); + error = kobject_add(&class_dev->kobj, class_dev->kobj.parent, + "%s", class_dev->class_id); if (error) goto out2; diff --git a/drivers/base/core.c b/drivers/base/core.c index 06e8738ab263..e88170293ca0 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -602,7 +602,7 @@ static struct kobject *get_device_parent(struct device *dev, if (!k) return NULL; k->kset = &dev->class->class_dirs; - retval = kobject_add_ng(k, parent_kobj, "%s", dev->class->name); + retval = kobject_add(k, parent_kobj, "%s", dev->class->name); if (retval < 0) { kobject_put(k); return NULL; @@ -776,7 +776,7 @@ static void device_remove_class_symlinks(struct device *dev) * This is part 2 of device_register(), though may be called * separately _iff_ device_initialize() has been called separately. * - * This adds it to the kobject hierarchy via kobject_add_ng(), adds it + * This adds it to the kobject hierarchy via kobject_add(), adds it * to the global and sibling lists for the device, then * adds it to the other relevant subsystems of the driver model. */ @@ -807,7 +807,7 @@ int device_add(struct device *dev) goto Error; /* first, register with generic layer. */ - error = kobject_add_ng(&dev->kobj, dev->kobj.parent, "%s", dev->bus_id); + error = kobject_add(&dev->kobj, dev->kobj.parent, "%s", dev->bus_id); if (error) goto Error; diff --git a/drivers/base/driver.c b/drivers/base/driver.c index 5aacff208f21..94b697a9b4e0 100644 --- a/drivers/base/driver.c +++ b/drivers/base/driver.c @@ -144,7 +144,7 @@ int driver_add_kobj(struct device_driver *drv, struct kobject *kobj, if (!name) return -ENOMEM; - return kobject_add_ng(kobj, &drv->p->kobj, "%s", name); + return kobject_add(kobj, &drv->p->kobj, "%s", name); } EXPORT_SYMBOL_GPL(driver_add_kobj); diff --git a/drivers/md/md.c b/drivers/md/md.c index 7ae9740c483d..989d8549f988 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1389,7 +1389,7 @@ static int bind_rdev_to_array(mdk_rdev_t * rdev, mddev_t * mddev) rdev->mddev = mddev; printk(KERN_INFO "md: bind<%s>\n", b); - if ((err = kobject_add_ng(&rdev->kobj, &mddev->kobj, "dev-%s", b))) + if ((err = kobject_add(&rdev->kobj, &mddev->kobj, "dev-%s", b))) goto fail; if (rdev->bdev->bd_part) diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c index 1a8299acd3f1..ee15667d6135 100644 --- a/drivers/net/iseries_veth.c +++ b/drivers/net/iseries_veth.c @@ -1084,7 +1084,7 @@ static struct net_device * __init veth_probe_one(int vlan, } kobject_init_ng(&port->kobject, &veth_port_ktype); - if (0 != kobject_add_ng(&port->kobject, &dev->dev.kobj, "veth_port")) + if (0 != kobject_add(&port->kobject, &dev->dev.kobj, "veth_port")) veth_error("Failed adding port for %s to sysfs.\n", dev->name); veth_info("%s attached to iSeries vlan %d (LPAR map = 0x%.4X)\n", diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c index acc387de988f..1ec2d31f2639 100644 --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -172,7 +172,7 @@ static int uio_dev_add_attributes(struct uio_device *idev) kobject_init_ng(&map->kobj, &map_attr_type); map->mem = mem; mem->map = map; - ret = kobject_add_ng(&map->kobj, idev->map_dir, "map%d", mi); + ret = kobject_add(&map->kobj, idev->map_dir, "map%d", mi); if (ret) goto err; ret = kobject_uevent(&map->kobj, KOBJ_ADD); diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 8b0aa715fa2f..84c5afd58899 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -80,9 +80,9 @@ static inline const char * kobject_name(const struct kobject * kobj) extern void kobject_init(struct kobject *); extern void kobject_init_ng(struct kobject *kobj, struct kobj_type *ktype); -extern int __must_check kobject_add_ng(struct kobject *kobj, - struct kobject *parent, - const char *fmt, ...); +extern int __must_check kobject_add(struct kobject *kobj, + struct kobject *parent, + const char *fmt, ...); extern int __must_check kobject_init_and_add(struct kobject *kobj, struct kobj_type *ktype, struct kobject *parent, diff --git a/lib/kobject.c b/lib/kobject.c index d04789fa4da9..359e114790cb 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -350,7 +350,7 @@ static int kobject_add_varg(struct kobject *kobj, struct kobject *parent, } /** - * kobject_add_ng - the main kobject add function + * kobject_add - the main kobject add function * @kobj: the kobject to add * @parent: pointer to the parent of the kobject. * @fmt: format to name the kobject with. @@ -381,8 +381,8 @@ static int kobject_add_varg(struct kobject *kobj, struct kobject *parent, * kobject_uevent() with the UEVENT_ADD parameter to ensure that * userspace is properly notified of this kobject's creation. */ -int kobject_add_ng(struct kobject *kobj, struct kobject *parent, - const char *fmt, ...) +int kobject_add(struct kobject *kobj, struct kobject *parent, + const char *fmt, ...) { va_list args; int retval; @@ -396,7 +396,7 @@ int kobject_add_ng(struct kobject *kobj, struct kobject *parent, return retval; } -EXPORT_SYMBOL(kobject_add_ng); +EXPORT_SYMBOL(kobject_add); /** * kobject_init_and_add - initialize a kobject structure and add it to the kobject hierarchy @@ -406,8 +406,8 @@ EXPORT_SYMBOL(kobject_add_ng); * @fmt: the name of the kobject. * * This function combines the call to kobject_init_ng() and - * kobject_add_ng(). The same type of error handling after a call to - * kobject_add_ng() and kobject lifetime rules are the same here. + * kobject_add(). The same type of error handling after a call to + * kobject_add() and kobject lifetime rules are the same here. */ int kobject_init_and_add(struct kobject *kobj, struct kobj_type *ktype, struct kobject *parent, const char *fmt, ...) @@ -677,7 +677,7 @@ struct kobject *kobject_create_and_add(const char *name, struct kobject *parent) if (!kobj) return NULL; - retval = kobject_add_ng(kobj, parent, "%s", name); + retval = kobject_add(kobj, parent, "%s", name); if (retval) { printk(KERN_WARNING "%s: kobject_add error: %d\n", __FUNCTION__, retval); -- cgit v1.2.3-59-g8ed1b From e1543ddf739b22a8c4218716ad50c26b3e147403 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 23:05:35 -0700 Subject: Kobject: remove kobject_init() as no one uses it anymore The old kobject_init() function is on longer in use, so let us remove it from the public scope (kset mess in the kobject.c file still uses it, but that can be cleaned up later very simply.) Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/kobject.h | 1 - lib/kobject.c | 11 +++-------- 2 files changed, 3 insertions(+), 9 deletions(-) diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 84c5afd58899..53458b674fae 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -78,7 +78,6 @@ static inline const char * kobject_name(const struct kobject * kobj) return kobj->k_name; } -extern void kobject_init(struct kobject *); extern void kobject_init_ng(struct kobject *kobj, struct kobj_type *ktype); extern int __must_check kobject_add(struct kobject *kobj, struct kobject *parent, diff --git a/lib/kobject.c b/lib/kobject.c index 359e114790cb..10d977b6e69d 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -124,11 +124,7 @@ char *kobject_get_path(struct kobject *kobj, gfp_t gfp_mask) } EXPORT_SYMBOL_GPL(kobject_get_path); -/** - * kobject_init - initialize object. - * @kobj: object in question. - */ -void kobject_init(struct kobject * kobj) +static void kobject_init_internal(struct kobject * kobj) { if (!kobj) return; @@ -232,7 +228,7 @@ int kobject_register(struct kobject * kobj) { int error = -EINVAL; if (kobj) { - kobject_init(kobj); + kobject_init_internal(kobj); error = kobject_add(kobj); if (!error) kobject_uevent(kobj, KOBJ_ADD); @@ -695,7 +691,7 @@ EXPORT_SYMBOL_GPL(kobject_create_and_add); void kset_init(struct kset * k) { - kobject_init(&k->kobj); + kobject_init_internal(&k->kobj); INIT_LIST_HEAD(&k->list); spin_lock_init(&k->list_lock); } @@ -887,7 +883,6 @@ struct kset *kset_create_and_add(const char *name, } EXPORT_SYMBOL_GPL(kset_create_and_add); -EXPORT_SYMBOL(kobject_init); EXPORT_SYMBOL(kobject_register); EXPORT_SYMBOL(kobject_unregister); EXPORT_SYMBOL(kobject_get); -- cgit v1.2.3-59-g8ed1b From f9cb074bff8e762ef24c44678a5a7d907f82fbeb Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 17 Dec 2007 23:05:35 -0700 Subject: Kobject: rename kobject_init_ng() to kobject_init() Now that the old kobject_init() function is gone, rename kobject_init_ng() to kobject_init() to clean up the namespace. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- block/elevator.c | 2 +- block/ll_rw_blk.c | 2 +- drivers/base/class.c | 2 +- drivers/base/core.c | 2 +- drivers/md/md.c | 2 +- drivers/net/iseries_veth.c | 4 ++-- drivers/uio/uio.c | 2 +- fs/char_dev.c | 4 ++-- include/linux/kobject.h | 2 +- lib/kobject.c | 14 +++++++------- 10 files changed, 18 insertions(+), 18 deletions(-) diff --git a/block/elevator.c b/block/elevator.c index 645469a4f49f..f9736fbdab03 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -185,7 +185,7 @@ static elevator_t *elevator_alloc(struct request_queue *q, eq->ops = &e->ops; eq->elevator_type = e; - kobject_init_ng(&eq->kobj, &elv_ktype); + kobject_init(&eq->kobj, &elv_ktype); mutex_init(&eq->sysfs_lock); eq->hash = kmalloc_node(sizeof(struct hlist_head) * ELV_HASH_ENTRIES, diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c index 234dd3de1824..5ccec8aa964b 100644 --- a/block/ll_rw_blk.c +++ b/block/ll_rw_blk.c @@ -1862,7 +1862,7 @@ struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id) init_timer(&q->unplug_timer); - kobject_init_ng(&q->kobj, &queue_ktype); + kobject_init(&q->kobj, &queue_ktype); mutex_init(&q->sysfs_lock); diff --git a/drivers/base/class.c b/drivers/base/class.c index 8e3cba224384..61fd26cc9f0e 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -553,7 +553,7 @@ static struct class_device_attribute class_uevent_attr = void class_device_initialize(struct class_device *class_dev) { class_dev->kobj.kset = &class_obj_subsys; - kobject_init_ng(&class_dev->kobj, &class_device_ktype); + kobject_init(&class_dev->kobj, &class_device_ktype); INIT_LIST_HEAD(&class_dev->node); } diff --git a/drivers/base/core.c b/drivers/base/core.c index e88170293ca0..675a719dcdd2 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -525,7 +525,7 @@ static void klist_children_put(struct klist_node *n) void device_initialize(struct device *dev) { dev->kobj.kset = devices_kset; - kobject_init_ng(&dev->kobj, &device_ktype); + kobject_init(&dev->kobj, &device_ktype); klist_init(&dev->klist_children, klist_children_get, klist_children_put); INIT_LIST_HEAD(&dev->dma_pools); diff --git a/drivers/md/md.c b/drivers/md/md.c index 989d8549f988..ae800ba061a6 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -2033,7 +2033,7 @@ static mdk_rdev_t *md_import_device(dev_t newdev, int super_format, int super_mi if (err) goto abort_free; - kobject_init_ng(&rdev->kobj, &rdev_ktype); + kobject_init(&rdev->kobj, &rdev_ktype); rdev->desc_nr = -1; rdev->saved_raid_disk = -1; diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c index ee15667d6135..419861cbc65e 100644 --- a/drivers/net/iseries_veth.c +++ b/drivers/net/iseries_veth.c @@ -844,7 +844,7 @@ static int veth_init_connection(u8 rlp) /* This gets us 1 reference, which is held on behalf of the driver * infrastructure. It's released at module unload. */ - kobject_init_ng(&cnx->kobject, &veth_lpar_connection_ktype); + kobject_init(&cnx->kobject, &veth_lpar_connection_ktype); msgs = kcalloc(VETH_NUMBUFFERS, sizeof(struct veth_msg), GFP_KERNEL); if (! msgs) { @@ -1083,7 +1083,7 @@ static struct net_device * __init veth_probe_one(int vlan, return NULL; } - kobject_init_ng(&port->kobject, &veth_port_ktype); + kobject_init(&port->kobject, &veth_port_ktype); if (0 != kobject_add(&port->kobject, &dev->dev.kobj, "veth_port")) veth_error("Failed adding port for %s to sysfs.\n", dev->name); diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c index 1ec2d31f2639..f352731add64 100644 --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -169,7 +169,7 @@ static int uio_dev_add_attributes(struct uio_device *idev) map = kzalloc(sizeof(*map), GFP_KERNEL); if (!map) goto err; - kobject_init_ng(&map->kobj, &map_attr_type); + kobject_init(&map->kobj, &map_attr_type); map->mem = mem; mem->map = map; ret = kobject_add(&map->kobj, idev->map_dir, "map%d", mi); diff --git a/fs/char_dev.c b/fs/char_dev.c index b2dd5a036631..2c7a8b5b4598 100644 --- a/fs/char_dev.c +++ b/fs/char_dev.c @@ -511,7 +511,7 @@ struct cdev *cdev_alloc(void) struct cdev *p = kzalloc(sizeof(struct cdev), GFP_KERNEL); if (p) { INIT_LIST_HEAD(&p->list); - kobject_init_ng(&p->kobj, &ktype_cdev_dynamic); + kobject_init(&p->kobj, &ktype_cdev_dynamic); } return p; } @@ -528,7 +528,7 @@ void cdev_init(struct cdev *cdev, const struct file_operations *fops) { memset(cdev, 0, sizeof *cdev); INIT_LIST_HEAD(&cdev->list); - kobject_init_ng(&cdev->kobj, &ktype_cdev_default); + kobject_init(&cdev->kobj, &ktype_cdev_default); cdev->ops = fops; } diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 53458b674fae..d9d8c368f044 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -78,7 +78,7 @@ static inline const char * kobject_name(const struct kobject * kobj) return kobj->k_name; } -extern void kobject_init_ng(struct kobject *kobj, struct kobj_type *ktype); +extern void kobject_init(struct kobject *kobj, struct kobj_type *ktype); extern int __must_check kobject_add(struct kobject *kobj, struct kobject *parent, const char *fmt, ...); diff --git a/lib/kobject.c b/lib/kobject.c index 10d977b6e69d..4cc231c86225 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -287,7 +287,7 @@ int kobject_set_name(struct kobject *kobj, const char *fmt, ...) EXPORT_SYMBOL(kobject_set_name); /** - * kobject_init_ng - initialize a kobject structure + * kobject_init - initialize a kobject structure * @kobj: pointer to the kobject to initialize * @ktype: pointer to the ktype for this kobject. * @@ -298,7 +298,7 @@ EXPORT_SYMBOL(kobject_set_name); * to kobject_put(), not by a call to kfree directly to ensure that all of * the memory is cleaned up properly. */ -void kobject_init_ng(struct kobject *kobj, struct kobj_type *ktype) +void kobject_init(struct kobject *kobj, struct kobj_type *ktype) { char *err_str; @@ -326,7 +326,7 @@ error: printk(KERN_ERR "kobject: %s\n", err_str); dump_stack(); } -EXPORT_SYMBOL(kobject_init_ng); +EXPORT_SYMBOL(kobject_init); static int kobject_add_varg(struct kobject *kobj, struct kobject *parent, const char *fmt, va_list vargs) @@ -401,7 +401,7 @@ EXPORT_SYMBOL(kobject_add); * @parent: pointer to the parent of this kobject. * @fmt: the name of the kobject. * - * This function combines the call to kobject_init_ng() and + * This function combines the call to kobject_init() and * kobject_add(). The same type of error handling after a call to * kobject_add() and kobject lifetime rules are the same here. */ @@ -411,7 +411,7 @@ int kobject_init_and_add(struct kobject *kobj, struct kobj_type *ktype, va_list args; int retval; - kobject_init_ng(kobj, ktype); + kobject_init(kobj, ktype); va_start(args, fmt); retval = kobject_add_varg(kobj, parent, fmt, args); @@ -636,7 +636,7 @@ static struct kobj_type dynamic_kobj_ktype = { * * If the kobject was not able to be created, NULL will be returned. * The kobject structure returned from here must be cleaned up with a - * call to kobject_put() and not kfree(), as kobject_init_ng() has + * call to kobject_put() and not kfree(), as kobject_init() has * already been called on this structure. */ struct kobject *kobject_create(void) @@ -647,7 +647,7 @@ struct kobject *kobject_create(void) if (!kobj) return NULL; - kobject_init_ng(kobj, &dynamic_kobj_ktype); + kobject_init(kobj, &dynamic_kobj_ktype); return kobj; } -- cgit v1.2.3-59-g8ed1b From 6d06adfaf82d154023141ddc0c9de18b6a49090b Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 19 Dec 2007 11:26:50 -0800 Subject: Kobject: remove kobject_register() The function is no longer used by anyone in the kernel, and it prevents the proper sending of the kobject uevent after the needed files are set up by the caller. kobject_init_and_add() can be used in its place. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/kobject.h | 1 - lib/kobject.c | 18 ------------------ 2 files changed, 19 deletions(-) diff --git a/include/linux/kobject.h b/include/linux/kobject.h index d9d8c368f044..259084758617 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -96,7 +96,6 @@ extern struct kobject * __must_check kobject_create_and_add(const char *name, extern int __must_check kobject_rename(struct kobject *, const char *new_name); extern int __must_check kobject_move(struct kobject *, struct kobject *); -extern int __must_check kobject_register(struct kobject *); extern void kobject_unregister(struct kobject *); extern struct kobject * kobject_get(struct kobject *); diff --git a/lib/kobject.c b/lib/kobject.c index 4cc231c86225..3326281c96b6 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -219,23 +219,6 @@ static int kobject_add_internal(struct kobject *kobj) return error; } -/** - * kobject_register - initialize and add an object. - * @kobj: object in question. - */ - -int kobject_register(struct kobject * kobj) -{ - int error = -EINVAL; - if (kobj) { - kobject_init_internal(kobj); - error = kobject_add(kobj); - if (!error) - kobject_uevent(kobj, KOBJ_ADD); - } - return error; -} - /** * kobject_set_name_vargs - Set the name of an kobject * @kobj: struct kobject to set the name of @@ -883,7 +866,6 @@ struct kset *kset_create_and_add(const char *name, } EXPORT_SYMBOL_GPL(kset_create_and_add); -EXPORT_SYMBOL(kobject_register); EXPORT_SYMBOL(kobject_unregister); EXPORT_SYMBOL(kobject_get); EXPORT_SYMBOL(kobject_put); -- cgit v1.2.3-59-g8ed1b From 12e339ac6e31a34fe42396aec8fb1c0b43caf61e Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 9 Apr 2002 12:14:34 -0700 Subject: Kset: remove kset_add function No one is calling this anymore, so just remove it and hard-code the one internal-use of it. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/kobject.h | 1 - lib/kobject.c | 13 +------------ 2 files changed, 1 insertion(+), 13 deletions(-) diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 259084758617..63967da073af 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -158,7 +158,6 @@ struct kset { }; extern void kset_init(struct kset * k); -extern int __must_check kset_add(struct kset * k); extern int __must_check kset_register(struct kset * k); extern void kset_unregister(struct kset * k); extern struct kset * __must_check kset_create_and_add(const char *name, diff --git a/lib/kobject.c b/lib/kobject.c index 3326281c96b6..c321f1910cc2 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -709,17 +709,6 @@ struct sysfs_ops kobj_sysfs_ops = { .store = kobj_attr_store, }; -/** - * kset_add - add a kset object to the hierarchy. - * @k: kset. - */ - -int kset_add(struct kset * k) -{ - return kobject_add_internal(&k->kobj); -} - - /** * kset_register - initialize and add a kset. * @k: kset. @@ -733,7 +722,7 @@ int kset_register(struct kset * k) return -EINVAL; kset_init(k); - err = kset_add(k); + err = kobject_add_internal(&k->kobj); if (err) return err; kobject_uevent(&k->kobj, KOBJ_ADD); -- cgit v1.2.3-59-g8ed1b From 0f4dafc0563c6c49e17fe14b3f5f356e4c4b8806 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Wed, 19 Dec 2007 01:40:42 +0100 Subject: Kobject: auto-cleanup on final unref We save the current state in the object itself, so we can do proper cleanup when the last reference is dropped. If the initial reference is dropped, the object will be removed from sysfs if needed, if an "add" event was sent, "remove" will be send, and the allocated resources are released. This allows us to clean up some driver core usage as well as allowing us to do other such changes to the rest of the kernel. Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 32 ++------- include/linux/kobject.h | 5 ++ lib/kobject.c | 170 +++++++++++++++++++++++++++--------------------- lib/kobject_uevent.c | 11 ++++ 4 files changed, 119 insertions(+), 99 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index 675a719dcdd2..d5d542db96fd 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -576,8 +576,8 @@ static struct kobject *get_device_parent(struct device *dev, /* * If we have no parent, we live in "virtual". - * Class-devices with a bus-device as parent, live - * in a class-directory to prevent namespace collisions. + * Class-devices with a non class-device as parent, live + * in a "glue" directory to prevent namespace collisions. */ if (parent == NULL) parent_kobj = virtual_device_parent(dev); @@ -607,8 +607,7 @@ static struct kobject *get_device_parent(struct device *dev, kobject_put(k); return NULL; } - /* Do not emit a uevent, as it's not needed for this - * "class glue" directory. */ + /* do not emit an uevent for this simple "glue" directory */ return k; } @@ -619,30 +618,13 @@ static struct kobject *get_device_parent(struct device *dev, static void cleanup_device_parent(struct device *dev) { - struct device *d; - int other = 0; + struct kobject *glue_dir = dev->kobj.parent; - if (!dev->class) - return; - - /* see if we live in a parent class directory */ - if (dev->kobj.parent->kset != &dev->class->class_dirs) + /* see if we live in a "glue" directory */ + if (!dev->class || glue_dir->kset != &dev->class->class_dirs) return; - /* if we are the last child of our class, delete the directory */ - down(&dev->class->sem); - list_for_each_entry(d, &dev->class->devices, node) { - if (d == dev) - continue; - if (d->kobj.parent == dev->kobj.parent) { - other = 1; - break; - } - } - if (!other) - kobject_del(dev->kobj.parent); - kobject_put(dev->kobj.parent); - up(&dev->class->sem); + kobject_put(glue_dir); } #endif diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 63967da073af..be03ce83f9cc 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -68,6 +68,11 @@ struct kobject { struct kset * kset; struct kobj_type * ktype; struct sysfs_dirent * sd; + unsigned int state_initialized:1; + unsigned int state_name_set:1; + unsigned int state_in_sysfs:1; + unsigned int state_add_uevent_sent:1; + unsigned int state_remove_uevent_sent:1; }; extern int kobject_set_name(struct kobject *, const char *, ...) diff --git a/lib/kobject.c b/lib/kobject.c index c321f1910cc2..4fce5ca42c2e 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -124,85 +124,74 @@ char *kobject_get_path(struct kobject *kobj, gfp_t gfp_mask) } EXPORT_SYMBOL_GPL(kobject_get_path); -static void kobject_init_internal(struct kobject * kobj) +/* add the kobject to its kset's list */ +static void kobj_kset_join(struct kobject *kobj) { - if (!kobj) + if (!kobj->kset) return; - kref_init(&kobj->kref); - INIT_LIST_HEAD(&kobj->entry); + + kset_get(kobj->kset); + spin_lock(&kobj->kset->list_lock); + list_add_tail(&kobj->entry, &kobj->kset->list); + spin_unlock(&kobj->kset->list_lock); } +/* remove the kobject from its kset's list */ +static void kobj_kset_leave(struct kobject *kobj) +{ + if (!kobj->kset) + return; -/** - * unlink - remove kobject from kset list. - * @kobj: kobject. - * - * Remove the kobject from the kset list and decrement - * its parent's refcount. - * This is separated out, so we can use it in both - * kobject_del() and kobject_add_internal() on error. - */ + spin_lock(&kobj->kset->list_lock); + list_del_init(&kobj->entry); + spin_unlock(&kobj->kset->list_lock); + kset_put(kobj->kset); +} -static void unlink(struct kobject * kobj) +static void kobject_init_internal(struct kobject * kobj) { - struct kobject *parent = kobj->parent; - - if (kobj->kset) { - spin_lock(&kobj->kset->list_lock); - list_del_init(&kobj->entry); - spin_unlock(&kobj->kset->list_lock); - } - kobj->parent = NULL; - kobject_put(kobj); - kobject_put(parent); + if (!kobj) + return; + kref_init(&kobj->kref); + INIT_LIST_HEAD(&kobj->entry); } + static int kobject_add_internal(struct kobject *kobj) { int error = 0; struct kobject * parent; - if (!(kobj = kobject_get(kobj))) + if (!kobj) return -ENOENT; - if (!kobj->k_name) - kobject_set_name(kobj, "NO_NAME"); - if (!*kobj->k_name) { - pr_debug("kobject (%p) attempted to be registered with no " + + if (!kobj->k_name || !kobj->k_name[0]) { + pr_debug("kobject: (%p): attempted to be registered with empty " "name!\n", kobj); WARN_ON(1); - kobject_put(kobj); return -EINVAL; } - parent = kobject_get(kobj->parent); - pr_debug("kobject: '%s' (%p): %s: parent: '%s', set: '%s'\n", - kobject_name(kobj), kobj, __FUNCTION__, - parent ? kobject_name(parent) : "", - kobj->kset ? kobject_name(&kobj->kset->kobj) : "" ); + parent = kobject_get(kobj->parent); + /* join kset if set, use it as parent if we do not already have one */ if (kobj->kset) { - kobj->kset = kset_get(kobj->kset); - - if (!parent) { + if (!parent) parent = kobject_get(&kobj->kset->kobj); - /* - * If the kset is our parent, get a second - * reference, we drop both the kset and the - * parent ref on cleanup - */ - kobject_get(parent); - } - - spin_lock(&kobj->kset->list_lock); - list_add_tail(&kobj->entry, &kobj->kset->list); - spin_unlock(&kobj->kset->list_lock); + kobj_kset_join(kobj); kobj->parent = parent; } + pr_debug("kobject: '%s' (%p): %s: parent: '%s', set: '%s'\n", + kobject_name(kobj), kobj, __FUNCTION__, + parent ? kobject_name(parent) : "", + kobj->kset ? kobject_name(&kobj->kset->kobj) : "" ); + error = create_dir(kobj); if (error) { - /* unlink does the kobject_put() for us */ - unlink(kobj); + kobj_kset_leave(kobj); + kobject_put(parent); + kobj->parent = NULL; /* be noisy on error issues */ if (error == -EEXIST) @@ -214,7 +203,8 @@ static int kobject_add_internal(struct kobject *kobj) printk(KERN_ERR "%s failed for %s (%d)\n", __FUNCTION__, kobject_name(kobj), error); dump_stack(); - } + } else + kobj->state_in_sysfs = 1; return error; } @@ -238,11 +228,13 @@ static int kobject_set_name_vargs(struct kobject *kobj, const char *fmt, if (!name) return -ENOMEM; + /* Free the old name, if necessary. */ kfree(kobj->k_name); /* Now, set the new name */ kobj->k_name = name; + kobj->state_name_set = 1; return 0; } @@ -293,20 +285,25 @@ void kobject_init(struct kobject *kobj, struct kobj_type *ktype) err_str = "must have a ktype to be initialized properly!\n"; goto error; } - if (atomic_read(&kobj->kref.refcount)) { + if (kobj->state_initialized) { /* do not error out as sometimes we can recover */ - printk(KERN_ERR "kobject: reference count is already set, " - "something is seriously wrong.\n"); + printk(KERN_ERR "kobject (%p): tried to init an initialized " + "object, something is seriously wrong.\n", kobj); dump_stack(); } kref_init(&kobj->kref); INIT_LIST_HEAD(&kobj->entry); kobj->ktype = ktype; + kobj->state_name_set = 0; + kobj->state_in_sysfs = 0; + kobj->state_add_uevent_sent = 0; + kobj->state_remove_uevent_sent = 0; + kobj->state_initialized = 1; return; error: - printk(KERN_ERR "kobject: %s\n", err_str); + printk(KERN_ERR "kobject (%p): %s\n", kobj, err_str); dump_stack(); } EXPORT_SYMBOL(kobject_init); @@ -345,17 +342,10 @@ static int kobject_add_varg(struct kobject *kobj, struct kobject *parent, * * If this function returns an error, kobject_put() must be called to * properly clean up the memory associated with the object. - * - * If the function is successful, the only way to properly clean up the - * memory is with a call to kobject_del(), in which case, a call to - * kobject_put() is not necessary (kobject_del() does the final - * kobject_put() to call the release function in the ktype's release - * pointer.) - * * Under no instance should the kobject that is passed to this function * be directly freed with a call to kfree(), that can leak memory. * - * Note, no uevent will be created with this call, the caller should set + * Note, no "add" uevent will be created with this call, the caller should set * up all of the necessary sysfs files for the object and then call * kobject_uevent() with the UEVENT_ADD parameter to ensure that * userspace is properly notified of this kobject's creation. @@ -369,6 +359,13 @@ int kobject_add(struct kobject *kobj, struct kobject *parent, if (!kobj) return -EINVAL; + if (!kobj->state_initialized) { + printk(KERN_ERR "kobject '%s' (%p): tried to add an " + "uninitialized object, something is seriously wrong.\n", + kobject_name(kobj), kobj); + dump_stack(); + return -EINVAL; + } va_start(args, fmt); retval = kobject_add_varg(kobj, parent, fmt, args); va_end(args); @@ -527,8 +524,12 @@ void kobject_del(struct kobject * kobj) { if (!kobj) return; + sysfs_remove_dir(kobj); - unlink(kobj); + kobj->state_in_sysfs = 0; + kobj_kset_leave(kobj); + kobject_put(kobj->parent); + kobj->parent = NULL; } /** @@ -565,21 +566,43 @@ struct kobject * kobject_get(struct kobject * kobj) */ static void kobject_cleanup(struct kobject *kobj) { - struct kobj_type * t = get_ktype(kobj); - struct kset * s = kobj->kset; + struct kobj_type *t = get_ktype(kobj); const char *name = kobj->k_name; + int name_set = kobj->state_name_set; pr_debug("kobject: '%s' (%p): %s\n", kobject_name(kobj), kobj, __FUNCTION__); + + if (t && !t->release) + pr_debug("kobject: '%s' (%p): does not have a release() " + "function, it is broken and must be fixed.\n", + kobject_name(kobj), kobj); + + /* send "remove" if the caller did not do it but sent "add" */ + if (kobj->state_add_uevent_sent && !kobj->state_remove_uevent_sent) { + pr_debug("kobject: '%s' (%p): auto cleanup 'remove' event\n", + kobject_name(kobj), kobj); + kobject_uevent(kobj, KOBJ_REMOVE); + } + + /* remove from sysfs if the caller did not do it */ + if (kobj->state_in_sysfs) { + pr_debug("kobject: '%s' (%p): auto cleanup kobject_del\n", + kobject_name(kobj), kobj); + kobject_del(kobj); + } + if (t && t->release) { + pr_debug("kobject: '%s' (%p): calling ktype release\n", + kobject_name(kobj), kobj); t->release(kobj); - /* If we have a release function, we can guess that this was - * not a statically allocated kobject, so we should be safe to - * free the name */ + } + + /* free name if we allocated it */ + if (name_set && name) { + pr_debug("kobject: '%s': free name\n", name); kfree(name); } - if (s) - kset_put(s); } static void kobject_release(struct kref *kref) @@ -601,8 +624,7 @@ void kobject_put(struct kobject * kobj) static void dynamic_kobj_release(struct kobject *kobj) { - pr_debug("kobject: '%s' (%p): %s\n", - kobject_name(kobj), kobj, __FUNCTION__); + pr_debug("kobject: (%p): %s\n", kobj, __FUNCTION__); kfree(kobj); } diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c index 51dc4d287add..b021e67c4294 100644 --- a/lib/kobject_uevent.c +++ b/lib/kobject_uevent.c @@ -180,6 +180,17 @@ int kobject_uevent_env(struct kobject *kobj, enum kobject_action action, } } + /* + * Mark "add" and "remove" events in the object to ensure proper + * events to userspace during automatic cleanup. If the object did + * send an "add" event, "remove" will automatically generated by + * the core, if not already done by the caller. + */ + if (action == KOBJ_ADD) + kobj->state_add_uevent_sent = 1; + else if (action == KOBJ_REMOVE) + kobj->state_remove_uevent_sent = 1; + /* we will send an event, so request a new sequence number */ spin_lock(&sequence_lock); seq = ++uevent_seqnum; -- cgit v1.2.3-59-g8ed1b From 7a6a41615bfb2f03ce797bc24104c50b42c935e5 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Sat, 22 Dec 2007 21:18:25 -0800 Subject: Modules: remove unneeded release function Now that kobjects properly clean up their name structures, no matter if they have a release function or not, we can drop this empty module kobject release function too (it was needed prior to this because of the way we handled static kobject names, we based the fact that if a release function was present, then we could safely free the name string, now we are more smart about things and only free names we have previously set.) Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- kernel/params.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/kernel/params.c b/kernel/params.c index 1078b148ca80..b4da9505f4d2 100644 --- a/kernel/params.c +++ b/kernel/params.c @@ -694,18 +694,8 @@ static struct kset_uevent_ops module_uevent_ops = { struct kset *module_kset; int module_sysfs_initialized; -static void module_release(struct kobject *kobj) -{ - /* - * Stupid empty release function to allow the memory for the kobject to - * be properly cleaned up. This will not need to be present for 2.6.25 - * with the upcoming kobject core rework. - */ -} - struct kobj_type module_ktype = { .sysfs_ops = &module_sysfs_ops, - .release = module_release, }; /* -- cgit v1.2.3-59-g8ed1b From 38a382ae5dd4f4d04e3046816b0a41836094e538 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 20 Dec 2007 08:13:05 -0800 Subject: Kobject: convert arch/* from kobject_unregister() to kobject_put() There is no need for kobject_unregister() anymore, thanks to Kay's kobject cleanup changes, so replace all instances of it with kobject_put(). Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- arch/ia64/kernel/topology.c | 9 ++++----- arch/s390/hypfs/inode.c | 4 ++-- arch/sh/kernel/cpu/sh4/sq.c | 2 +- arch/x86/kernel/cpu/intel_cacheinfo.c | 9 ++++----- arch/x86/kernel/cpu/mcheck/mce_amd_64.c | 6 +++--- 5 files changed, 14 insertions(+), 16 deletions(-) diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c index c4311e3adf55..a2484fc1a06c 100644 --- a/arch/ia64/kernel/topology.c +++ b/arch/ia64/kernel/topology.c @@ -366,10 +366,9 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev) "index%1lu", i); if (unlikely(retval)) { for (j = 0; j < i; j++) { - kobject_unregister( - &(LEAF_KOBJECT_PTR(cpu,j)->kobj)); + kobject_put(&(LEAF_KOBJECT_PTR(cpu,j)->kobj)); } - kobject_unregister(&all_cpu_cache_info[cpu].kobj); + kobject_put(&all_cpu_cache_info[cpu].kobj); cpu_cache_sysfs_exit(cpu); break; } @@ -386,10 +385,10 @@ static int __cpuinit cache_remove_dev(struct sys_device * sys_dev) unsigned long i; for (i = 0; i < all_cpu_cache_info[cpu].num_cache_leaves; i++) - kobject_unregister(&(LEAF_KOBJECT_PTR(cpu,i)->kobj)); + kobject_put(&(LEAF_KOBJECT_PTR(cpu,i)->kobj)); if (all_cpu_cache_info[cpu].kobj.parent) { - kobject_unregister(&all_cpu_cache_info[cpu].kobj); + kobject_put(&all_cpu_cache_info[cpu].kobj); memset(&all_cpu_cache_info[cpu].kobj, 0, sizeof(struct kobject)); diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c index 631a6109f642..4b010ff814c9 100644 --- a/arch/s390/hypfs/inode.c +++ b/arch/s390/hypfs/inode.c @@ -517,7 +517,7 @@ static int __init hypfs_init(void) return 0; fail_filesystem: - kobject_unregister(s390_kobj); + kobject_put(s390_kobj); fail_sysfs: if (!MACHINE_IS_VM) hypfs_diag_exit(); @@ -531,7 +531,7 @@ static void __exit hypfs_exit(void) if (!MACHINE_IS_VM) hypfs_diag_exit(); unregister_filesystem(&hypfs_type); - kobject_unregister(s390_kobj); + kobject_put(s390_kobj); } module_init(hypfs_init) diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c index 97fd9b9a4820..3008c00eea6b 100644 --- a/arch/sh/kernel/cpu/sh4/sq.c +++ b/arch/sh/kernel/cpu/sh4/sq.c @@ -360,7 +360,7 @@ static int __devexit sq_sysdev_remove(struct sys_device *sysdev) unsigned int cpu = sysdev->id; struct kobject *kobj = sq_kobject[cpu]; - kobject_unregister(kobj); + kobject_put(kobj); return 0; } diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 3509542eed87..8b4507b8469b 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -749,10 +749,9 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev) "index%1lu", i); if (unlikely(retval)) { for (j = 0; j < i; j++) { - kobject_unregister( - &(INDEX_KOBJECT_PTR(cpu,j)->kobj)); + kobject_put(&(INDEX_KOBJECT_PTR(cpu,j)->kobj)); } - kobject_unregister(cache_kobject[cpu]); + kobject_put(cache_kobject[cpu]); cpuid4_cache_sysfs_exit(cpu); break; } @@ -777,8 +776,8 @@ static void __cpuinit cache_remove_dev(struct sys_device * sys_dev) cpu_clear(cpu, cache_dev_map); for (i = 0; i < num_cache_leaves; i++) - kobject_unregister(&(INDEX_KOBJECT_PTR(cpu,i)->kobj)); - kobject_unregister(cache_kobject[cpu]); + kobject_put(&(INDEX_KOBJECT_PTR(cpu,i)->kobj)); + kobject_put(cache_kobject[cpu]); cpuid4_cache_sysfs_exit(cpu); } diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c index ef15f35b10ed..753588755fee 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c @@ -456,7 +456,7 @@ recurse: out_free: if (b) { - kobject_unregister(&b->kobj); + kobject_put(&b->kobj); kfree(b); } return err; @@ -581,7 +581,7 @@ static void deallocate_threshold_block(unsigned int cpu, return; list_for_each_entry_safe(pos, tmp, &head->blocks->miscj, miscj) { - kobject_unregister(&pos->kobj); + kobject_put(&pos->kobj); list_del(&pos->miscj); kfree(pos); } @@ -627,7 +627,7 @@ static void threshold_remove_bank(unsigned int cpu, int bank) deallocate_threshold_block(cpu, bank); free_out: - kobject_unregister(b->kobj); + kobject_put(b->kobj); kfree(b); per_cpu(threshold_banks, cpu)[bank] = NULL; } -- cgit v1.2.3-59-g8ed1b From c10997f6575f476ff38442fa18fd4a0d80345f9d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 20 Dec 2007 08:13:05 -0800 Subject: Kobject: convert drivers/* from kobject_unregister() to kobject_put() There is no need for kobject_unregister() anymore, thanks to Kay's kobject cleanup changes, so replace all instances of it with kobject_put(). Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/bus.c | 4 ++-- drivers/base/sys.c | 2 +- drivers/block/pktcdvd.c | 2 +- drivers/cpufreq/cpufreq.c | 4 +--- drivers/cpuidle/sysfs.c | 4 ++-- drivers/edac/edac_device_sysfs.c | 10 +++++----- drivers/edac/edac_mc_sysfs.c | 12 ++++++------ drivers/edac/edac_pci_sysfs.c | 6 +++--- drivers/firmware/edd.c | 2 +- drivers/firmware/efivars.c | 6 +++--- drivers/infiniband/core/sysfs.c | 6 +++--- drivers/md/md.c | 2 +- drivers/net/ibmveth.c | 2 +- drivers/parisc/pdc_stable.c | 6 +++--- drivers/pci/hotplug/pci_hotplug_core.c | 2 +- drivers/pci/hotplug/rpadlpar_sysfs.c | 4 ++-- drivers/uio/uio.c | 8 ++++---- 17 files changed, 40 insertions(+), 42 deletions(-) diff --git a/drivers/base/bus.c b/drivers/base/bus.c index aea579365f6d..a377b65ba328 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -681,7 +681,7 @@ int bus_add_driver(struct device_driver *drv) kobject_uevent(&priv->kobj, KOBJ_ADD); return error; out_unregister: - kobject_unregister(&priv->kobj); + kobject_put(&priv->kobj); out_put_bus: bus_put(bus); return error; @@ -708,7 +708,7 @@ void bus_remove_driver(struct device_driver * drv) pr_debug("bus: '%s': remove driver %s\n", drv->bus->name, drv->name); driver_detach(drv); module_remove_driver(drv); - kobject_unregister(&drv->p->kobj); + kobject_put(&drv->p->kobj); bus_put(drv->bus); } diff --git a/drivers/base/sys.c b/drivers/base/sys.c index 47fc6eb6473f..e666441dd76b 100644 --- a/drivers/base/sys.c +++ b/drivers/base/sys.c @@ -264,7 +264,7 @@ void sysdev_unregister(struct sys_device * sysdev) } mutex_unlock(&sysdev_drivers_lock); - kobject_unregister(&sysdev->kobj); + kobject_put(&sysdev->kobj); } diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index d1ee38361e0b..e9de1712e5a0 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -130,7 +130,7 @@ static struct pktcdvd_kobj* pkt_kobj_create(struct pktcdvd_device *pd, static void pkt_kobj_remove(struct pktcdvd_kobj *p) { if (p) - kobject_unregister(&p->kobj); + kobject_put(&p->kobj); } /* * default release function for pktcdvd kernel objects. diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 9e102af0c07b..5efd5550f4ca 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -913,7 +913,7 @@ err_out_unregister: cpufreq_cpu_data[j] = NULL; spin_unlock_irqrestore(&cpufreq_driver_lock, flags); - kobject_unregister(&policy->kobj); + kobject_put(&policy->kobj); wait_for_completion(&policy->kobj_unregister); err_out_driver_exit: @@ -1030,8 +1030,6 @@ static int __cpufreq_remove_dev (struct sys_device * sys_dev) unlock_policy_rwsem_write(cpu); - kobject_unregister(&data->kobj); - kobject_put(&data->kobj); /* we need to make sure that the underlying kobj is actually diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c index 059db9c21474..088ea74edd34 100644 --- a/drivers/cpuidle/sysfs.c +++ b/drivers/cpuidle/sysfs.c @@ -277,7 +277,7 @@ static struct kobj_type ktype_state_cpuidle = { static void inline cpuidle_free_state_kobj(struct cpuidle_device *device, int i) { - kobject_unregister(&device->kobjs[i]->kobj); + kobject_put(&device->kobjs[i]->kobj); wait_for_completion(&device->kobjs[i]->kobj_unregister); kfree(device->kobjs[i]); device->kobjs[i] = NULL; @@ -358,5 +358,5 @@ void cpuidle_remove_sysfs(struct sys_device *sysdev) struct cpuidle_device *dev; dev = per_cpu(cpuidle_devices, cpu); - kobject_unregister(&dev->kobj); + kobject_put(&dev->kobj); } diff --git a/drivers/edac/edac_device_sysfs.c b/drivers/edac/edac_device_sysfs.c index 10e5b19a3e3b..53764577035f 100644 --- a/drivers/edac/edac_device_sysfs.c +++ b/drivers/edac/edac_device_sysfs.c @@ -303,7 +303,7 @@ void edac_device_unregister_sysfs_main_kobj( * a) module_put() this module * b) 'kfree' the memory */ - kobject_unregister(&edac_dev->kobj); + kobject_put(&edac_dev->kobj); } /* edac_dev -> instance information */ @@ -574,7 +574,7 @@ static int edac_device_create_block(struct edac_device_ctl_info *edac_dev, /* Error unwind stack */ err_on_attrib: - kobject_unregister(&block->kobj); + kobject_put(&block->kobj); err_out: return err; @@ -605,7 +605,7 @@ static void edac_device_delete_block(struct edac_device_ctl_info *edac_dev, /* unregister this block's kobject, SEE: * edac_device_ctrl_block_release() callback operation */ - kobject_unregister(&block->kobj); + kobject_put(&block->kobj); } /* instance ctor/dtor code */ @@ -672,7 +672,7 @@ static int edac_device_create_instance(struct edac_device_ctl_info *edac_dev, /* error unwind stack */ err_release_instance_kobj: - kobject_unregister(&instance->kobj); + kobject_put(&instance->kobj); err_out: return err; @@ -697,7 +697,7 @@ static void edac_device_delete_instance(struct edac_device_ctl_info *edac_dev, /* unregister this instance's kobject, SEE: * edac_device_ctrl_instance_release() for callback operation */ - kobject_unregister(&instance->kobj); + kobject_put(&instance->kobj); } /* diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c index 45b1d3633418..9aac88027fb3 100644 --- a/drivers/edac/edac_mc_sysfs.c +++ b/drivers/edac/edac_mc_sysfs.c @@ -395,7 +395,7 @@ static int edac_create_csrow_object(struct mem_ctl_info *mci, goto err_release_top_kobj; /* At this point, to release a csrow kobj, one must - * call the kobject_unregister and allow that tear down + * call the kobject_put and allow that tear down * to work the releasing */ @@ -406,7 +406,7 @@ static int edac_create_csrow_object(struct mem_ctl_info *mci, err = edac_create_channel_files(&csrow->kobj, chan); if (err) { /* special case the unregister here */ - kobject_unregister(&csrow->kobj); + kobject_put(&csrow->kobj); goto err_out; } } @@ -808,7 +808,7 @@ fail_out: void edac_mc_unregister_sysfs_main_kobj(struct mem_ctl_info *mci) { /* delete the kobj from the mc_kset */ - kobject_unregister(&mci->edac_mci_kobj); + kobject_put(&mci->edac_mci_kobj); } #define EDAC_DEVICE_SYMLINK "device" @@ -923,7 +923,7 @@ int edac_create_sysfs_mci_device(struct mem_ctl_info *mci) fail1: for (i--; i >= 0; i--) { if (csrow->nr_pages > 0) { - kobject_unregister(&mci->csrows[i].kobj); + kobject_put(&mci->csrows[i].kobj); } } @@ -950,7 +950,7 @@ void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci) for (i = 0; i < mci->nr_csrows; i++) { if (mci->csrows[i].nr_pages > 0) { debugf0("%s() unreg csrow-%d\n", __func__, i); - kobject_unregister(&mci->csrows[i].kobj); + kobject_put(&mci->csrows[i].kobj); } } @@ -967,7 +967,7 @@ void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci) debugf0("%s() unregister this mci kobj\n", __func__); /* unregister this instance's kobject */ - kobject_unregister(&mci->edac_mci_kobj); + kobject_put(&mci->edac_mci_kobj); } diff --git a/drivers/edac/edac_pci_sysfs.c b/drivers/edac/edac_pci_sysfs.c index 834eaa9d6148..5b075da99145 100644 --- a/drivers/edac/edac_pci_sysfs.c +++ b/drivers/edac/edac_pci_sysfs.c @@ -205,7 +205,7 @@ void edac_pci_unregister_sysfs_instance_kobj(struct edac_pci_ctl_info *pci) * function release the main reference count and then * kfree the memory */ - kobject_unregister(&pci->kobj); + kobject_put(&pci->kobj); } /***************************** EDAC PCI sysfs root **********************/ @@ -411,9 +411,9 @@ static void edac_pci_main_kobj_teardown(void) * main kobj */ if (atomic_dec_return(&edac_pci_sysfs_refcount) == 0) { - debugf0("%s() called kobject_unregister on main kobj\n", + debugf0("%s() called kobject_put on main kobj\n", __func__); - kobject_unregister(&edac_pci_top_main_kobj); + kobject_put(&edac_pci_top_main_kobj); } } diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c index dc0b87b13505..d168223db159 100644 --- a/drivers/firmware/edd.c +++ b/drivers/firmware/edd.c @@ -693,7 +693,7 @@ edd_create_symlink_to_pcidev(struct edd_device *edev) static inline void edd_device_unregister(struct edd_device *edev) { - kobject_unregister(&edev->kobj); + kobject_put(&edev->kobj); } static void edd_populate_dir(struct edd_device * edev) diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c index b61a72fb6219..f4f709d1370b 100644 --- a/drivers/firmware/efivars.c +++ b/drivers/firmware/efivars.c @@ -397,7 +397,7 @@ static struct kobj_type efivar_ktype = { static inline void efivar_unregister(struct efivar_entry *var) { - kobject_unregister(&var->kobj); + kobject_put(&var->kobj); } @@ -732,7 +732,7 @@ efivars_init(void) kset_unregister(vars_kset); out_firmware_unregister: - kobject_unregister(efi_kobj); + kobject_put(efi_kobj); out_free: kfree(variable_name); @@ -753,7 +753,7 @@ efivars_exit(void) } kset_unregister(vars_kset); - kobject_unregister(efi_kobj); + kobject_put(efi_kobj); } module_init(efivars_init); diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c index aa81129704cf..c864ef70fdf9 100644 --- a/drivers/infiniband/core/sysfs.c +++ b/drivers/infiniband/core/sysfs.c @@ -714,7 +714,7 @@ err_put: sysfs_remove_group(p, &pma_group); sysfs_remove_group(p, &port->pkey_group); sysfs_remove_group(p, &port->gid_group); - kobject_unregister(p); + kobject_put(p); } } @@ -738,10 +738,10 @@ void ib_device_unregister_sysfs(struct ib_device *device) sysfs_remove_group(p, &pma_group); sysfs_remove_group(p, &port->pkey_group); sysfs_remove_group(p, &port->gid_group); - kobject_unregister(p); + kobject_put(p); } - kobject_unregister(device->ports_parent); + kobject_put(device->ports_parent); class_device_unregister(&device->class_dev); } diff --git a/drivers/md/md.c b/drivers/md/md.c index ae800ba061a6..c28a120b4161 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -231,7 +231,7 @@ static void mddev_put(mddev_t *mddev) list_del(&mddev->all_mddevs); spin_unlock(&all_mddevs_lock); blk_cleanup_queue(mddev->queue); - kobject_unregister(&mddev->kobj); + kobject_put(&mddev->kobj); } else spin_unlock(&all_mddevs_lock); } diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c index bee30375999a..57772bebff56 100644 --- a/drivers/net/ibmveth.c +++ b/drivers/net/ibmveth.c @@ -1236,7 +1236,7 @@ static int __devexit ibmveth_remove(struct vio_dev *dev) int i; for(i = 0; irx_buff_pool[i].kobj); + kobject_put(&adapter->rx_buff_pool[i].kobj); unregister_netdev(netdev); diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c index 87bc6b73b249..de34aa9d3136 100644 --- a/drivers/parisc/pdc_stable.c +++ b/drivers/parisc/pdc_stable.c @@ -1026,7 +1026,7 @@ pdcs_unregister_pathentries(void) for (i = 0; (entry = pdcspath_entries[i]); i++) { read_lock(&entry->rw_lock); if (entry->ready >= 2) - kobject_unregister(&entry->kobj); + kobject_put(&entry->kobj); read_unlock(&entry->rw_lock); } } @@ -1086,7 +1086,7 @@ fail_pdcsreg: kset_unregister(paths_kset); fail_ksetreg: - kobject_unregister(stable_kobj); + kobject_put(stable_kobj); fail_firmreg: printk(KERN_INFO PDCS_PREFIX " bailing out\n"); @@ -1098,7 +1098,7 @@ pdc_stable_exit(void) { pdcs_unregister_pathentries(); kset_unregister(paths_kset); - kobject_unregister(stable_kobj); + kobject_put(stable_kobj); } diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index 3606d5b52a70..47bb0e1ff3fa 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -671,7 +671,7 @@ int pci_hp_deregister (struct hotplug_slot *slot) fs_remove_slot (slot); dbg ("Removed slot %s from the list\n", slot->name); - kobject_unregister(&slot->kobj); + kobject_put(&slot->kobj); return 0; } diff --git a/drivers/pci/hotplug/rpadlpar_sysfs.c b/drivers/pci/hotplug/rpadlpar_sysfs.c index 9cde367915b6..e32148a8fa12 100644 --- a/drivers/pci/hotplug/rpadlpar_sysfs.c +++ b/drivers/pci/hotplug/rpadlpar_sysfs.c @@ -114,12 +114,12 @@ int dlpar_sysfs_init(void) error = sysfs_create_group(dlpar_kobj, &dlpar_attr_group); if (error) - kobject_unregister(dlpar_kobj); + kobject_put(dlpar_kobj); return error; } void dlpar_sysfs_exit(void) { sysfs_remove_group(dlpar_kobj, &dlpar_attr_group); - kobject_unregister(dlpar_kobj); + kobject_put(dlpar_kobj); } diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c index f352731add64..03b66fb734a6 100644 --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -186,9 +186,9 @@ err: for (mi--; mi>=0; mi--) { mem = &idev->info->mem[mi]; map = mem->map; - kobject_unregister(&map->kobj); + kobject_put(&map->kobj); } - kobject_unregister(idev->map_dir); + kobject_put(idev->map_dir); sysfs_remove_group(&idev->dev->kobj, &uio_attr_grp); err_group: dev_err(idev->dev, "error creating sysfs files (%d)\n", ret); @@ -203,9 +203,9 @@ static void uio_dev_del_attributes(struct uio_device *idev) mem = &idev->info->mem[mi]; if (mem->size == 0) break; - kobject_unregister(&mem->map->kobj); + kobject_put(&mem->map->kobj); } - kobject_unregister(idev->map_dir); + kobject_put(idev->map_dir); sysfs_remove_group(&idev->dev->kobj, &uio_attr_grp); } -- cgit v1.2.3-59-g8ed1b From 197b12d6796a3bca187f22a8978a33d51e2bcd79 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 20 Dec 2007 08:13:05 -0800 Subject: Kobject: convert fs/* from kobject_unregister() to kobject_put() There is no need for kobject_unregister() anymore, thanks to Kay's kobject cleanup changes, so replace all instances of it with kobject_put(). Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- fs/configfs/mount.c | 6 +++--- fs/debugfs/inode.c | 4 ++-- fs/dlm/lockspace.c | 4 ++-- fs/ecryptfs/main.c | 4 ++-- fs/fuse/inode.c | 6 +++--- fs/gfs2/locking/dlm/sysfs.c | 2 +- fs/gfs2/sys.c | 4 ++-- fs/partitions/check.c | 6 +++--- 8 files changed, 18 insertions(+), 18 deletions(-) diff --git a/fs/configfs/mount.c b/fs/configfs/mount.c index 54bf0db0d4b0..de3b31d0a37d 100644 --- a/fs/configfs/mount.c +++ b/fs/configfs/mount.c @@ -150,7 +150,7 @@ static int __init configfs_init(void) err = register_filesystem(&configfs_fs_type); if (err) { printk(KERN_ERR "configfs: Unable to register filesystem!\n"); - kobject_unregister(config_kobj); + kobject_put(config_kobj); kmem_cache_destroy(configfs_dir_cachep); configfs_dir_cachep = NULL; goto out; @@ -159,7 +159,7 @@ static int __init configfs_init(void) err = configfs_inode_init(); if (err) { unregister_filesystem(&configfs_fs_type); - kobject_unregister(config_kobj); + kobject_put(config_kobj); kmem_cache_destroy(configfs_dir_cachep); configfs_dir_cachep = NULL; } @@ -170,7 +170,7 @@ out: static void __exit configfs_exit(void) { unregister_filesystem(&configfs_fs_type); - kobject_unregister(config_kobj); + kobject_put(config_kobj); kmem_cache_destroy(configfs_dir_cachep); configfs_dir_cachep = NULL; configfs_inode_exit(); diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c index 97f6381c36c2..d26e2826ba5b 100644 --- a/fs/debugfs/inode.c +++ b/fs/debugfs/inode.c @@ -438,7 +438,7 @@ static int __init debugfs_init(void) retval = register_filesystem(&debug_fs_type); if (retval) - kobject_unregister(debug_kobj); + kobject_put(debug_kobj); return retval; } @@ -446,7 +446,7 @@ static void __exit debugfs_exit(void) { simple_release_fs(&debugfs_mount, &debugfs_mount_count); unregister_filesystem(&debug_fs_type); - kobject_unregister(debug_kobj); + kobject_put(debug_kobj); } core_initcall(debugfs_init); diff --git a/fs/dlm/lockspace.c b/fs/dlm/lockspace.c index b750f13d0328..5c108c49cb8c 100644 --- a/fs/dlm/lockspace.c +++ b/fs/dlm/lockspace.c @@ -579,7 +579,7 @@ static int new_lockspace(char *name, int namelen, void **lockspace, kfree(ls->ls_rsbtbl); out_lsfree: if (do_unreg) - kobject_unregister(&ls->ls_kobj); + kobject_put(&ls->ls_kobj); else kfree(ls); out: @@ -728,7 +728,7 @@ static int release_lockspace(struct dlm_ls *ls, int force) dlm_clear_members(ls); dlm_clear_members_gone(ls); kfree(ls->ls_node_array); - kobject_unregister(&ls->ls_kobj); + kobject_put(&ls->ls_kobj); /* The ls structure will be freed when the kobject is done with */ mutex_lock(&ls_lock); diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c index 4f1332107bbd..0249aa4ae181 100644 --- a/fs/ecryptfs/main.c +++ b/fs/ecryptfs/main.c @@ -767,7 +767,7 @@ static int do_sysfs_registration(void) if (rc) { printk(KERN_ERR "Unable to create ecryptfs version attributes\n"); - kobject_unregister(ecryptfs_kobj); + kobject_put(ecryptfs_kobj); } out: return rc; @@ -776,7 +776,7 @@ out: static void do_sysfs_unregistration(void) { sysfs_remove_group(ecryptfs_kobj, &attr_group); - kobject_unregister(ecryptfs_kobj); + kobject_put(ecryptfs_kobj); } static int __init ecryptfs_init(void) diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index e6e23a2ad4b3..e5e80d1a4687 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -810,15 +810,15 @@ static int fuse_sysfs_init(void) return 0; out_fuse_unregister: - kobject_unregister(fuse_kobj); + kobject_put(fuse_kobj); out_err: return err; } static void fuse_sysfs_cleanup(void) { - kobject_unregister(connections_kobj); - kobject_unregister(fuse_kobj); + kobject_put(connections_kobj); + kobject_put(fuse_kobj); } static int __init fuse_init(void) diff --git a/fs/gfs2/locking/dlm/sysfs.c b/fs/gfs2/locking/dlm/sysfs.c index a7336b909c61..a87b09839761 100644 --- a/fs/gfs2/locking/dlm/sysfs.c +++ b/fs/gfs2/locking/dlm/sysfs.c @@ -207,7 +207,7 @@ int gdlm_kobject_setup(struct gdlm_ls *ls, struct kobject *fskobj) void gdlm_kobject_release(struct gdlm_ls *ls) { - kobject_unregister(&ls->kobj); + kobject_put(&ls->kobj); } int gdlm_sysfs_init(void) diff --git a/fs/gfs2/sys.c b/fs/gfs2/sys.c index 8d9cd5bd5845..3a3176b846f3 100644 --- a/fs/gfs2/sys.c +++ b/fs/gfs2/sys.c @@ -525,7 +525,7 @@ fail_counters: fail_lockstruct: sysfs_remove_group(&sdp->sd_kobj, &lockstruct_group); fail_reg: - kobject_unregister(&sdp->sd_kobj); + kobject_put(&sdp->sd_kobj); fail: fs_err(sdp, "error %d adding sysfs files", error); return error; @@ -537,7 +537,7 @@ void gfs2_sys_fs_del(struct gfs2_sbd *sdp) sysfs_remove_group(&sdp->sd_kobj, &args_group); sysfs_remove_group(&sdp->sd_kobj, &counters_group); sysfs_remove_group(&sdp->sd_kobj, &lockstruct_group); - kobject_unregister(&sdp->sd_kobj); + kobject_put(&sdp->sd_kobj); } int gfs2_sys_init(void) diff --git a/fs/partitions/check.c b/fs/partitions/check.c index 97f3f5f064ee..739da701ae7b 100644 --- a/fs/partitions/check.c +++ b/fs/partitions/check.c @@ -314,7 +314,7 @@ void delete_partition(struct gendisk *disk, int part) p->nr_sects = 0; p->ios[0] = p->ios[1] = 0; p->sectors[0] = p->sectors[1] = 0; - kobject_unregister(p->holder_dir); + kobject_put(p->holder_dir); device_del(&p->dev); put_device(&p->dev); } @@ -505,8 +505,8 @@ void del_gendisk(struct gendisk *disk) disk_stat_set_all(disk, 0); disk->stamp = 0; - kobject_unregister(disk->holder_dir); - kobject_unregister(disk->slave_dir); + kobject_put(disk->holder_dir); + kobject_put(disk->slave_dir); disk->driverfs_dev = NULL; #ifndef CONFIG_SYSFS_DEPRECATED sysfs_remove_link(block_depr, disk->dev.bus_id); -- cgit v1.2.3-59-g8ed1b From 78a2d906b40fe530ea800c1e873bfe8f02326f1e Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 20 Dec 2007 08:13:05 -0800 Subject: Kobject: convert remaining kobject_unregister() to kobject_put() There is no need for kobject_unregister() anymore, thanks to Kay's kobject cleanup changes, so replace all instances of it with kobject_put(). Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- kernel/ksysfs.c | 2 +- kernel/module.c | 9 ++++----- lib/kobject.c | 4 ++-- net/bridge/br_sysfs_br.c | 2 +- security/inode.c | 2 +- 5 files changed, 9 insertions(+), 10 deletions(-) diff --git a/kernel/ksysfs.c b/kernel/ksysfs.c index 1081aff5fb9e..e53bc30e9ba5 100644 --- a/kernel/ksysfs.c +++ b/kernel/ksysfs.c @@ -154,7 +154,7 @@ notes_exit: group_exit: sysfs_remove_group(kernel_kobj, &kernel_attr_group); kset_exit: - kobject_unregister(kernel_kobj); + kobject_put(kernel_kobj); exit: return error; } diff --git a/kernel/module.c b/kernel/module.c index 89cd4c7361d8..dcb8a2cbf75e 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -1257,9 +1257,8 @@ int mod_sysfs_setup(struct module *mod, out_unreg_param: module_param_sysfs_remove(mod); out_unreg_holders: - kobject_unregister(mod->holders_dir); + kobject_put(mod->holders_dir); out_unreg: - kobject_del(&mod->mkobj.kobj); kobject_put(&mod->mkobj.kobj); return err; } @@ -1269,9 +1268,9 @@ static void mod_kobject_remove(struct module *mod) { module_remove_modinfo_attrs(mod); module_param_sysfs_remove(mod); - kobject_unregister(mod->mkobj.drivers_dir); - kobject_unregister(mod->holders_dir); - kobject_unregister(&mod->mkobj.kobj); + kobject_put(mod->mkobj.drivers_dir); + kobject_put(mod->holders_dir); + kobject_put(&mod->mkobj.kobj); } /* diff --git a/lib/kobject.c b/lib/kobject.c index 4fce5ca42c2e..462946ee3e64 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -664,7 +664,7 @@ struct kobject *kobject_create(void) * * This function creates a kset structure dynamically and registers it * with sysfs. When you are finished with this structure, call - * kobject_unregister() and the structure will be dynamically freed when + * kobject_put() and the structure will be dynamically freed when * it is no longer being used. * * If the kobject was not able to be created, NULL will be returned. @@ -761,7 +761,7 @@ void kset_unregister(struct kset * k) { if (!k) return; - kobject_unregister(&k->kobj); + kobject_put(&k->kobj); } diff --git a/net/bridge/br_sysfs_br.c b/net/bridge/br_sysfs_br.c index 4e7f91fafedd..9cf0538d1717 100644 --- a/net/bridge/br_sysfs_br.c +++ b/net/bridge/br_sysfs_br.c @@ -447,7 +447,7 @@ void br_sysfs_delbr(struct net_device *dev) struct kobject *kobj = &dev->dev.kobj; struct net_bridge *br = netdev_priv(dev); - kobject_unregister(br->ifobj); + kobject_put(br->ifobj); sysfs_remove_bin_file(kobj, &bridge_forward); sysfs_remove_group(kobj, &bridge_group); } diff --git a/security/inode.c b/security/inode.c index def0cc1b07f2..acc6cf0d7900 100644 --- a/security/inode.c +++ b/security/inode.c @@ -327,7 +327,7 @@ static int __init securityfs_init(void) retval = register_filesystem(&fs_type); if (retval) - kobject_unregister(security_kobj); + kobject_put(security_kobj); return retval; } -- cgit v1.2.3-59-g8ed1b From 528a4bf1d5ffed310d26fc1d82d45c02949f71cf Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 20 Dec 2007 08:13:05 -0800 Subject: Kobject: remove kobject_unregister() as no one uses it anymore There are no in-kernel users of kobject_unregister() so it should be removed. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- include/linux/kobject.h | 2 -- lib/kobject.c | 17 ----------------- 2 files changed, 19 deletions(-) diff --git a/include/linux/kobject.h b/include/linux/kobject.h index be03ce83f9cc..504ac0eb4412 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -101,8 +101,6 @@ extern struct kobject * __must_check kobject_create_and_add(const char *name, extern int __must_check kobject_rename(struct kobject *, const char *new_name); extern int __must_check kobject_move(struct kobject *, struct kobject *); -extern void kobject_unregister(struct kobject *); - extern struct kobject * kobject_get(struct kobject *); extern void kobject_put(struct kobject *); diff --git a/lib/kobject.c b/lib/kobject.c index 462946ee3e64..a0773734545c 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -532,22 +532,6 @@ void kobject_del(struct kobject * kobj) kobj->parent = NULL; } -/** - * kobject_unregister - remove object from hierarchy and decrement refcount. - * @kobj: object going away. - */ - -void kobject_unregister(struct kobject * kobj) -{ - if (!kobj) - return; - pr_debug("kobject: '%s' (%p): %s\n", - kobject_name(kobj), kobj, __FUNCTION__); - kobject_uevent(kobj, KOBJ_REMOVE); - kobject_del(kobj); - kobject_put(kobj); -} - /** * kobject_get - increment refcount for object. * @kobj: object. @@ -877,7 +861,6 @@ struct kset *kset_create_and_add(const char *name, } EXPORT_SYMBOL_GPL(kset_create_and_add); -EXPORT_SYMBOL(kobject_unregister); EXPORT_SYMBOL(kobject_get); EXPORT_SYMBOL(kobject_put); EXPORT_SYMBOL(kobject_del); -- cgit v1.2.3-59-g8ed1b From af5ca3f4ec5cc4432a42a73b050dd8898ce8fd00 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Thu, 20 Dec 2007 02:09:39 +0100 Subject: Driver core: change sysdev classes to use dynamic kobject names All kobjects require a dynamically allocated name now. We no longer need to keep track if the name is statically assigned, we can just unconditionally free() all kobject names on cleanup. Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- arch/arm/kernel/time.c | 4 ++-- arch/arm/mach-integrator/integrator_ap.c | 2 +- arch/arm/mach-pxa/cm-x270.c | 2 +- arch/arm/mach-pxa/lpd270.c | 2 +- arch/arm/mach-pxa/lubbock.c | 2 +- arch/arm/mach-pxa/mainstone.c | 2 +- arch/arm/mach-s3c2410/s3c2410.c | 2 +- arch/arm/mach-s3c2412/s3c2412.c | 2 +- arch/arm/mach-s3c2440/mach-osiris.c | 2 +- arch/arm/mach-s3c2443/s3c2443.c | 2 +- arch/arm/mach-sa1100/irq.c | 2 +- arch/arm/oprofile/common.c | 2 +- arch/arm/plat-omap/gpio.c | 2 +- arch/arm/plat-s3c24xx/dma.c | 2 +- arch/arm/plat-s3c24xx/s3c244x.c | 4 ++-- arch/avr32/kernel/time.c | 2 +- arch/mips/kernel/i8259.c | 2 +- arch/powerpc/platforms/cell/spu_base.c | 2 +- arch/powerpc/platforms/powermac/pic.c | 2 +- arch/powerpc/sysdev/ipic.c | 2 +- arch/powerpc/sysdev/mpic.c | 2 +- arch/powerpc/sysdev/qe_lib/qe_ic.c | 2 +- arch/ppc/syslib/ipic.c | 2 +- arch/ppc/syslib/open_pic.c | 2 +- arch/ppc/syslib/open_pic2.c | 2 +- arch/s390/kernel/time.c | 2 +- arch/sh/drivers/dma/dma-sysfs.c | 2 +- arch/sh/kernel/time.c | 2 +- arch/x86/kernel/apic_32.c | 2 +- arch/x86/kernel/apic_64.c | 2 +- arch/x86/kernel/cpu/mcheck/mce_64.c | 2 +- arch/x86/kernel/i8237.c | 2 +- arch/x86/kernel/i8259_32.c | 2 +- arch/x86/kernel/i8259_64.c | 2 +- arch/x86/kernel/io_apic_32.c | 2 +- arch/x86/kernel/io_apic_64.c | 2 +- arch/x86/kernel/nmi_32.c | 2 +- arch/x86/kernel/nmi_64.c | 2 +- arch/x86/oprofile/nmi_int.c | 2 +- drivers/acpi/pci_link.c | 2 +- drivers/base/class.c | 2 +- drivers/base/cpu.c | 2 +- drivers/base/memory.c | 2 +- drivers/base/node.c | 2 +- drivers/base/sys.c | 1 + drivers/edac/edac_module.c | 2 +- drivers/kvm/kvm_main.c | 2 +- drivers/macintosh/via-pmu.c | 2 +- drivers/scsi/libsas/sas_scsi_host.c | 2 +- include/linux/kobject.h | 13 ++----------- include/linux/sysdev.h | 1 + kernel/rtmutex-tester.c | 2 +- kernel/time/clocksource.c | 2 +- kernel/time/timekeeping.c | 2 +- lib/kobject.c | 14 +++++--------- 55 files changed, 62 insertions(+), 73 deletions(-) diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 1533d3ecd7a0..f6f3689a86ee 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -195,7 +195,7 @@ static int leds_shutdown(struct sys_device *dev) } static struct sysdev_class leds_sysclass = { - set_kset_name("leds"), + .name = "leds", .shutdown = leds_shutdown, .suspend = leds_suspend, .resume = leds_resume, @@ -369,7 +369,7 @@ static int timer_resume(struct sys_device *dev) #endif static struct sysdev_class timer_sysclass = { - set_kset_name("timer"), + .name = "timer", .suspend = timer_suspend, .resume = timer_resume, }; diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 72280754354d..df37e93c6fc9 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -214,7 +214,7 @@ static int irq_resume(struct sys_device *dev) #endif static struct sysdev_class irq_class = { - set_kset_name("irq"), + .name = "irq", .suspend = irq_suspend, .resume = irq_resume, }; diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index 177664ccb2e2..a16349272f54 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -566,7 +566,7 @@ static int cmx270_resume(struct sys_device *dev) } static struct sysdev_class cmx270_pm_sysclass = { - set_kset_name("pm"), + .name = "pm", .resume = cmx270_resume, .suspend = cmx270_suspend, }; diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 26116440a7c9..78ebad063cba 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -122,7 +122,7 @@ static int lpd270_irq_resume(struct sys_device *dev) } static struct sysdev_class lpd270_irq_sysclass = { - set_kset_name("cpld_irq"), + .name = "cpld_irq", .resume = lpd270_irq_resume, }; diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 011a1a72b61c..1d3112dc629e 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -126,7 +126,7 @@ static int lubbock_irq_resume(struct sys_device *dev) } static struct sysdev_class lubbock_irq_sysclass = { - set_kset_name("cpld_irq"), + .name = "cpld_irq", .resume = lubbock_irq_resume, }; diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index a4bc3483cbb3..41d8c6cea62b 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -120,7 +120,7 @@ static int mainstone_irq_resume(struct sys_device *dev) } static struct sysdev_class mainstone_irq_sysclass = { - set_kset_name("cpld_irq"), + .name = "cpld_irq", .resume = mainstone_irq_resume, }; diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index e580303cb0ab..0e7991940f81 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -100,7 +100,7 @@ void __init s3c2410_init_clocks(int xtal) } struct sysdev_class s3c2410_sysclass = { - set_kset_name("s3c2410-core"), + .name = "s3c2410-core", }; static struct sys_device s3c2410_sysdev = { diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index 4f92a1562d77..265cd3f567a3 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -196,7 +196,7 @@ void __init s3c2412_init_clocks(int xtal) */ struct sysdev_class s3c2412_sysclass = { - set_kset_name("s3c2412-core"), + .name = "s3c2412-core", }; static int __init s3c2412_core_init(void) diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index c326983f4a8f..78af7664988b 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -312,7 +312,7 @@ static int osiris_pm_resume(struct sys_device *sd) #endif static struct sysdev_class osiris_pm_sysclass = { - set_kset_name("mach-osiris"), + .name = "mach-osiris", .suspend = osiris_pm_suspend, .resume = osiris_pm_resume, }; diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c index 8d8117158d23..9ce490560af9 100644 --- a/arch/arm/mach-s3c2443/s3c2443.c +++ b/arch/arm/mach-s3c2443/s3c2443.c @@ -43,7 +43,7 @@ static struct map_desc s3c2443_iodesc[] __initdata = { }; struct sysdev_class s3c2443_sysclass = { - set_kset_name("s3c2443-core"), + .name = "s3c2443-core", }; static struct sys_device s3c2443_sysdev = { diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c index edf3347d9c5b..3dc17d7bf38e 100644 --- a/arch/arm/mach-sa1100/irq.c +++ b/arch/arm/mach-sa1100/irq.c @@ -283,7 +283,7 @@ static int sa1100irq_resume(struct sys_device *dev) } static struct sysdev_class sa1100irq_sysclass = { - set_kset_name("sa11x0-irq"), + .name = "sa11x0-irq", .suspend = sa1100irq_suspend, .resume = sa1100irq_resume, }; diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index a9de727c9327..0a5cf3a6438b 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -96,7 +96,7 @@ static int op_arm_resume(struct sys_device *dev) } static struct sysdev_class oprofile_sysclass = { - set_kset_name("oprofile"), + .name = "oprofile", .resume = op_arm_resume, .suspend = op_arm_suspend, }; diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 6097753394ad..b2a87b8ef673 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -1455,7 +1455,7 @@ static int omap_gpio_resume(struct sys_device *dev) } static struct sysdev_class omap_gpio_sysclass = { - set_kset_name("gpio"), + .name = "gpio", .suspend = omap_gpio_suspend, .resume = omap_gpio_resume, }; diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 29696e46ed65..aae1b9cbaf44 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -1265,7 +1265,7 @@ static int s3c2410_dma_resume(struct sys_device *dev) #endif /* CONFIG_PM */ struct sysdev_class dma_sysclass = { - set_kset_name("s3c24xx-dma"), + .name = "s3c24xx-dma", .suspend = s3c2410_dma_suspend, .resume = s3c2410_dma_resume, }; diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c index 3444b13afac5..f197bb3a2366 100644 --- a/arch/arm/plat-s3c24xx/s3c244x.c +++ b/arch/arm/plat-s3c24xx/s3c244x.c @@ -151,13 +151,13 @@ static int s3c244x_resume(struct sys_device *dev) /* Since the S3C2442 and S3C2440 share items, put both sysclasses here */ struct sysdev_class s3c2440_sysclass = { - set_kset_name("s3c2440-core"), + .name = "s3c2440-core", .suspend = s3c244x_suspend, .resume = s3c244x_resume }; struct sysdev_class s3c2442_sysclass = { - set_kset_name("s3c2442-core"), + .name = "s3c2442-core", .suspend = s3c244x_suspend, .resume = s3c244x_resume }; diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c index 7014a3571ec0..36a46c3ae308 100644 --- a/arch/avr32/kernel/time.c +++ b/arch/avr32/kernel/time.c @@ -214,7 +214,7 @@ void __init time_init(void) } static struct sysdev_class timer_class = { - set_kset_name("timer"), + .name = "timer", }; static struct sys_device timer_device = { diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c index 471013577108..197d7977de35 100644 --- a/arch/mips/kernel/i8259.c +++ b/arch/mips/kernel/i8259.c @@ -238,7 +238,7 @@ static int i8259A_shutdown(struct sys_device *dev) } static struct sysdev_class i8259_sysdev_class = { - set_kset_name("i8259"), + .name = "i8259", .resume = i8259A_resume, .shutdown = i8259A_shutdown, }; diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index c83c3e3f5178..a08862203643 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -459,7 +459,7 @@ static int spu_shutdown(struct sys_device *sysdev) } static struct sysdev_class spu_sysdev_class = { - set_kset_name("spu"), + .name = "spu", .shutdown = spu_shutdown, }; diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 999f5e160897..84c0d4ef76a2 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -663,7 +663,7 @@ static int pmacpic_resume(struct sys_device *sysdev) #endif /* CONFIG_PM && CONFIG_PPC32 */ static struct sysdev_class pmacpic_sysclass = { - set_kset_name("pmac_pic"), + .name = "pmac_pic", }; static struct sys_device device_pmacpic = { diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c index 05a56e55804c..e898ff4d2b97 100644 --- a/arch/powerpc/sysdev/ipic.c +++ b/arch/powerpc/sysdev/ipic.c @@ -725,7 +725,7 @@ unsigned int ipic_get_irq(void) } static struct sysdev_class ipic_sysclass = { - set_kset_name("ipic"), + .name = "ipic", }; static struct sys_device device_ipic = { diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index e47938899a92..212a94f5d34b 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -1584,7 +1584,7 @@ static struct sysdev_class mpic_sysclass = { .resume = mpic_resume, .suspend = mpic_suspend, #endif - set_kset_name("mpic"), + .name = "mpic", }; static int mpic_init_sys(void) diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c index e1c0fd6dbc1a..f59444d3be75 100644 --- a/arch/powerpc/sysdev/qe_lib/qe_ic.c +++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c @@ -483,7 +483,7 @@ int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high) } static struct sysdev_class qe_ic_sysclass = { - set_kset_name("qe_ic"), + .name = "qe_ic", }; static struct sys_device device_qe_ic = { diff --git a/arch/ppc/syslib/ipic.c b/arch/ppc/syslib/ipic.c index 9192777d0f78..4f163e20939e 100644 --- a/arch/ppc/syslib/ipic.c +++ b/arch/ppc/syslib/ipic.c @@ -614,7 +614,7 @@ int ipic_get_irq(void) } static struct sysdev_class ipic_sysclass = { - set_kset_name("ipic"), + .name = "ipic", }; static struct sys_device device_ipic = { diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c index 18ec94733293..da36522d327a 100644 --- a/arch/ppc/syslib/open_pic.c +++ b/arch/ppc/syslib/open_pic.c @@ -1043,7 +1043,7 @@ int openpic_resume(struct sys_device *sysdev) #endif /* CONFIG_PM */ static struct sysdev_class openpic_sysclass = { - set_kset_name("openpic"), + .name = "openpic", }; static struct sys_device device_openpic = { diff --git a/arch/ppc/syslib/open_pic2.c b/arch/ppc/syslib/open_pic2.c index d585207f9f77..449075a04798 100644 --- a/arch/ppc/syslib/open_pic2.c +++ b/arch/ppc/syslib/open_pic2.c @@ -666,7 +666,7 @@ int openpic2_resume(struct sys_device *sysdev) /* HACK ALERT */ static struct sysdev_class openpic2_sysclass = { - set_kset_name("openpic2"), + .name = "openpic2", }; static struct sys_device device_openpic2 = { diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 22b800ce2126..3bbac1293be4 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -1145,7 +1145,7 @@ static void etr_work_fn(struct work_struct *work) * Sysfs interface functions */ static struct sysdev_class etr_sysclass = { - set_kset_name("etr") + .name = "etr", }; static struct sys_device etr_port0_dev = { diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c index eebcd4768bbf..51b57c0d1a3c 100644 --- a/arch/sh/drivers/dma/dma-sysfs.c +++ b/arch/sh/drivers/dma/dma-sysfs.c @@ -19,7 +19,7 @@ #include static struct sysdev_class dma_sysclass = { - set_kset_name("dma"), + .name = "dma", }; EXPORT_SYMBOL(dma_sysclass); diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c index a3a67d151e52..2bc04bfee738 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time.c @@ -174,7 +174,7 @@ int timer_resume(struct sys_device *dev) #endif static struct sysdev_class timer_sysclass = { - set_kset_name("timer"), + .name = "timer", .suspend = timer_suspend, .resume = timer_resume, }; diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index edb5108e5d0e..a56c782653be 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -1530,7 +1530,7 @@ static int lapic_resume(struct sys_device *dev) */ static struct sysdev_class lapic_sysclass = { - set_kset_name("lapic"), + .name = "lapic", .resume = lapic_resume, .suspend = lapic_suspend, }; diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index f28ccb588fba..fa6cdee6d303 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -639,7 +639,7 @@ static int lapic_resume(struct sys_device *dev) } static struct sysdev_class lapic_sysclass = { - set_kset_name("lapic"), + .name = "lapic", .resume = lapic_resume, .suspend = lapic_suspend, }; diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c index 4b21d29fb5aa..242e8668dbeb 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_64.c @@ -745,7 +745,7 @@ static void mce_restart(void) static struct sysdev_class mce_sysclass = { .resume = mce_resume, - set_kset_name("machinecheck"), + .name = "machinecheck", }; DEFINE_PER_CPU(struct sys_device, device_mce); diff --git a/arch/x86/kernel/i8237.c b/arch/x86/kernel/i8237.c index 29313832df0c..dbd6c1d1b638 100644 --- a/arch/x86/kernel/i8237.c +++ b/arch/x86/kernel/i8237.c @@ -51,7 +51,7 @@ static int i8237A_suspend(struct sys_device *dev, pm_message_t state) } static struct sysdev_class i8237_sysdev_class = { - set_kset_name("i8237"), + .name = "i8237", .suspend = i8237A_suspend, .resume = i8237A_resume, }; diff --git a/arch/x86/kernel/i8259_32.c b/arch/x86/kernel/i8259_32.c index f634fc715c99..5f3496d01984 100644 --- a/arch/x86/kernel/i8259_32.c +++ b/arch/x86/kernel/i8259_32.c @@ -258,7 +258,7 @@ static int i8259A_shutdown(struct sys_device *dev) } static struct sysdev_class i8259_sysdev_class = { - set_kset_name("i8259"), + .name = "i8259", .suspend = i8259A_suspend, .resume = i8259A_resume, .shutdown = i8259A_shutdown, diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c index 3f27ea0b9816..ba6d57286f56 100644 --- a/arch/x86/kernel/i8259_64.c +++ b/arch/x86/kernel/i8259_64.c @@ -370,7 +370,7 @@ static int i8259A_shutdown(struct sys_device *dev) } static struct sysdev_class i8259_sysdev_class = { - set_kset_name("i8259"), + .name = "i8259", .suspend = i8259A_suspend, .resume = i8259A_resume, .shutdown = i8259A_shutdown, diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index a6b1490e00c4..ab77f1905469 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -2401,7 +2401,7 @@ static int ioapic_resume(struct sys_device *dev) } static struct sysdev_class ioapic_sysdev_class = { - set_kset_name("ioapic"), + .name = "ioapic", .suspend = ioapic_suspend, .resume = ioapic_resume, }; diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index cbac1670c7c3..23a3ac06a23e 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -1850,7 +1850,7 @@ static int ioapic_resume(struct sys_device *dev) } static struct sysdev_class ioapic_sysdev_class = { - set_kset_name("ioapic"), + .name = "ioapic", .suspend = ioapic_suspend, .resume = ioapic_resume, }; diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index 852db2906921..4f4bfd3a88b6 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -176,7 +176,7 @@ static int lapic_nmi_resume(struct sys_device *dev) static struct sysdev_class nmi_sysclass = { - set_kset_name("lapic_nmi"), + .name = "lapic_nmi", .resume = lapic_nmi_resume, .suspend = lapic_nmi_suspend, }; diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c index 4253c4e8849c..c3d1476b6a11 100644 --- a/arch/x86/kernel/nmi_64.c +++ b/arch/x86/kernel/nmi_64.c @@ -211,7 +211,7 @@ static int lapic_nmi_resume(struct sys_device *dev) } static struct sysdev_class nmi_sysclass = { - set_kset_name("lapic_nmi"), + .name = "lapic_nmi", .resume = lapic_nmi_resume, .suspend = lapic_nmi_suspend, }; diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c index 944bbcdd2b8d..c8ab79ef4276 100644 --- a/arch/x86/oprofile/nmi_int.c +++ b/arch/x86/oprofile/nmi_int.c @@ -51,7 +51,7 @@ static int nmi_resume(struct sys_device *dev) static struct sysdev_class oprofile_sysclass = { - set_kset_name("oprofile"), + .name = "oprofile", .resume = nmi_resume, .suspend = nmi_suspend, }; diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c index c9f526e55392..5400ea173f6f 100644 --- a/drivers/acpi/pci_link.c +++ b/drivers/acpi/pci_link.c @@ -911,7 +911,7 @@ __setup("acpi_irq_balance", acpi_irq_balance_set); /* FIXME: we will remove this interface after all drivers call pci_disable_device */ static struct sysdev_class irqrouter_sysdev_class = { - set_kset_name("irqrouter"), + .name = "irqrouter", .resume = irqrouter_resume, }; diff --git a/drivers/base/class.c b/drivers/base/class.c index 61fd26cc9f0e..b962a76875d2 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -466,7 +466,6 @@ static struct kset_uevent_ops class_uevent_ops = { * entirely soon. */ static struct kset class_obj_subsys = { - .kobj = { .k_name = "class_obj", }, .uevent_ops = &class_uevent_ops, }; @@ -872,6 +871,7 @@ int __init classes_init(void) /* ick, this is ugly, the things we go through to keep from showing up * in sysfs... */ kset_init(&class_obj_subsys); + kobject_set_name(&class_obj_subsys.kobj, "class_obj"); if (!class_obj_subsys.kobj.parent) class_obj_subsys.kobj.parent = &class_obj_subsys.kobj; return 0; diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c index 40545071e3c9..c5885f5ce0ac 100644 --- a/drivers/base/cpu.c +++ b/drivers/base/cpu.c @@ -14,7 +14,7 @@ #include "base.h" struct sysdev_class cpu_sysdev_class = { - set_kset_name("cpu"), + .name = "cpu", }; EXPORT_SYMBOL(cpu_sysdev_class); diff --git a/drivers/base/memory.c b/drivers/base/memory.c index 7868707c7eda..7ae413fdd5fc 100644 --- a/drivers/base/memory.c +++ b/drivers/base/memory.c @@ -26,7 +26,7 @@ #define MEMORY_CLASS_NAME "memory" static struct sysdev_class memory_sysdev_class = { - set_kset_name(MEMORY_CLASS_NAME), + .name = MEMORY_CLASS_NAME, }; static const char *memory_uevent_name(struct kset *kset, struct kobject *kobj) diff --git a/drivers/base/node.c b/drivers/base/node.c index 88eeed72b5d6..e59861f18ce5 100644 --- a/drivers/base/node.c +++ b/drivers/base/node.c @@ -15,7 +15,7 @@ #include static struct sysdev_class node_class = { - set_kset_name("node"), + .name = "node", }; diff --git a/drivers/base/sys.c b/drivers/base/sys.c index e666441dd76b..2f79c55acdcc 100644 --- a/drivers/base/sys.c +++ b/drivers/base/sys.c @@ -136,6 +136,7 @@ int sysdev_class_register(struct sysdev_class * cls) cls->kset.kobj.parent = &system_kset->kobj; cls->kset.kobj.ktype = &ktype_sysdev_class; cls->kset.kobj.kset = system_kset; + kobject_set_name(&cls->kset.kobj, cls->name); return kset_register(&cls->kset); } diff --git a/drivers/edac/edac_module.c b/drivers/edac/edac_module.c index e0c4a4086055..7e1374afd967 100644 --- a/drivers/edac/edac_module.c +++ b/drivers/edac/edac_module.c @@ -31,7 +31,7 @@ struct workqueue_struct *edac_workqueue; * need to export to other files in this modules */ static struct sysdev_class edac_class = { - set_kset_name("edac"), + .name = "edac", }; static int edac_class_valid; diff --git a/drivers/kvm/kvm_main.c b/drivers/kvm/kvm_main.c index 47c10b8f89b3..c0f372f1d761 100644 --- a/drivers/kvm/kvm_main.c +++ b/drivers/kvm/kvm_main.c @@ -3451,7 +3451,7 @@ static int kvm_resume(struct sys_device *dev) } static struct sysdev_class kvm_sysdev_class = { - set_kset_name("kvm"), + .name = "kvm", .suspend = kvm_suspend, .resume = kvm_resume, }; diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index 6123c70153d3..ac420b17e16f 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -2796,7 +2796,7 @@ static int pmu_sys_resume(struct sys_device *sysdev) #endif /* CONFIG_PM_SLEEP && CONFIG_PPC32 */ static struct sysdev_class pmu_sysclass = { - set_kset_name("pmu"), + .name = "pmu", }; static struct sys_device device_pmu = { diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index 7663841eb4cf..a3fdc57e2673 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -464,7 +464,7 @@ int sas_eh_bus_reset_handler(struct scsi_cmnd *cmd) res = sas_phy_reset(phy, 1); if (res) SAS_DPRINTK("Bus reset of %s failed 0x%x\n", - phy->dev.kobj.k_name, + kobject_name(&phy->dev.kobj), res); if (res == TMF_RESP_FUNC_SUCC || res == TMF_RESP_FUNC_COMPLETE) return SUCCESS; diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 504ac0eb4412..4adbe1d83081 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -61,7 +61,7 @@ enum kobject_action { }; struct kobject { - const char * k_name; + const char *name; struct kref kref; struct list_head entry; struct kobject * parent; @@ -69,7 +69,6 @@ struct kobject { struct kobj_type * ktype; struct sysfs_dirent * sd; unsigned int state_initialized:1; - unsigned int state_name_set:1; unsigned int state_in_sysfs:1; unsigned int state_add_uevent_sent:1; unsigned int state_remove_uevent_sent:1; @@ -80,7 +79,7 @@ extern int kobject_set_name(struct kobject *, const char *, ...) static inline const char * kobject_name(const struct kobject * kobj) { - return kobj->k_name; + return kobj->name; } extern void kobject_init(struct kobject *kobj, struct kobj_type *ktype); @@ -189,14 +188,6 @@ static inline struct kobj_type *get_ktype(struct kobject *kobj) extern struct kobject * kset_find_obj(struct kset *, const char *); - -/* - * Use this when initializing an embedded kset with no other - * fields to initialize. - */ -#define set_kset_name(str) .kset = { .kobj = { .k_name = str } } - - /* The global /sys/kernel/ kobject for people to chain off of */ extern struct kobject *kernel_kobj; /* The global /sys/hypervisor/ kobject for people to chain off of */ diff --git a/include/linux/sysdev.h b/include/linux/sysdev.h index e285746588d6..f752e73bf977 100644 --- a/include/linux/sysdev.h +++ b/include/linux/sysdev.h @@ -29,6 +29,7 @@ struct sys_device; struct sysdev_class { + const char *name; struct list_head drivers; /* Default operations for these types of devices */ diff --git a/kernel/rtmutex-tester.c b/kernel/rtmutex-tester.c index e3055ba69159..092e4c620af9 100644 --- a/kernel/rtmutex-tester.c +++ b/kernel/rtmutex-tester.c @@ -394,7 +394,7 @@ static SYSDEV_ATTR(status, 0600, sysfs_test_status, NULL); static SYSDEV_ATTR(command, 0600, NULL, sysfs_test_command); static struct sysdev_class rttest_sysclass = { - set_kset_name("rttest"), + .name = "rttest", }; static int init_test_thread(int id) diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c index c8a9d13874df..8d6125ad2cf0 100644 --- a/kernel/time/clocksource.c +++ b/kernel/time/clocksource.c @@ -441,7 +441,7 @@ static SYSDEV_ATTR(available_clocksource, 0600, sysfs_show_available_clocksources, NULL); static struct sysdev_class clocksource_sysclass = { - set_kset_name("clocksource"), + .name = "clocksource", }; static struct sys_device device_clocksource = { diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index e5e466b27598..ab46ae8c062b 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -335,9 +335,9 @@ static int timekeeping_suspend(struct sys_device *dev, pm_message_t state) /* sysfs resume/suspend bits for timekeeping */ static struct sysdev_class timekeeping_sysclass = { + .name = "timekeeping", .resume = timekeeping_resume, .suspend = timekeeping_suspend, - set_kset_name("timekeeping"), }; static struct sys_device device_timer = { diff --git a/lib/kobject.c b/lib/kobject.c index a0773734545c..8dc32454661d 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -165,7 +165,7 @@ static int kobject_add_internal(struct kobject *kobj) if (!kobj) return -ENOENT; - if (!kobj->k_name || !kobj->k_name[0]) { + if (!kobj->name || !kobj->name[0]) { pr_debug("kobject: (%p): attempted to be registered with empty " "name!\n", kobj); WARN_ON(1); @@ -228,13 +228,11 @@ static int kobject_set_name_vargs(struct kobject *kobj, const char *fmt, if (!name) return -ENOMEM; - /* Free the old name, if necessary. */ - kfree(kobj->k_name); + kfree(kobj->name); /* Now, set the new name */ - kobj->k_name = name; - kobj->state_name_set = 1; + kobj->name = name; return 0; } @@ -295,7 +293,6 @@ void kobject_init(struct kobject *kobj, struct kobj_type *ktype) kref_init(&kobj->kref); INIT_LIST_HEAD(&kobj->entry); kobj->ktype = ktype; - kobj->state_name_set = 0; kobj->state_in_sysfs = 0; kobj->state_add_uevent_sent = 0; kobj->state_remove_uevent_sent = 0; @@ -551,8 +548,7 @@ struct kobject * kobject_get(struct kobject * kobj) static void kobject_cleanup(struct kobject *kobj) { struct kobj_type *t = get_ktype(kobj); - const char *name = kobj->k_name; - int name_set = kobj->state_name_set; + const char *name = kobj->name; pr_debug("kobject: '%s' (%p): %s\n", kobject_name(kobj), kobj, __FUNCTION__); @@ -583,7 +579,7 @@ static void kobject_cleanup(struct kobject *kobj) } /* free name if we allocated it */ - if (name_set && name) { + if (name) { pr_debug("kobject: '%s': free name\n", name); kfree(name); } -- cgit v1.2.3-59-g8ed1b From 5008743dc7f98dd1ad4f20f4d7ff0b479e78895d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 27 Nov 2007 11:28:26 -0800 Subject: kobject: remove old, outdated documentation. As we are replacing the documentation, it's easier to do this in a two stage pass, delete the old file and add the new one. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- Documentation/kobject.txt | 289 ---------------------------------------------- 1 file changed, 289 deletions(-) delete mode 100644 Documentation/kobject.txt diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt deleted file mode 100644 index ca86a885ad8f..000000000000 --- a/Documentation/kobject.txt +++ /dev/null @@ -1,289 +0,0 @@ -The kobject Infrastructure - -Patrick Mochel - -Updated: 3 June 2003 - - -Copyright (c) 2003 Patrick Mochel -Copyright (c) 2003 Open Source Development Labs - - -0. Introduction - -The kobject infrastructure performs basic object management that larger -data structures and subsystems can leverage, rather than reimplement -similar functionality. This functionality primarily concerns: - -- Object reference counting. -- Maintaining lists (sets) of objects. -- Object set locking. -- Userspace representation. - -The infrastructure consists of a number of object types to support -this functionality. Their programming interfaces are described below -in detail, and briefly here: - -- kobjects a simple object. -- kset a set of objects of a certain type. -- ktype a set of helpers for objects of a common type. - - -The kobject infrastructure maintains a close relationship with the -sysfs filesystem. Each kobject that is registered with the kobject -core receives a directory in sysfs. Attributes about the kobject can -then be exported. Please see Documentation/filesystems/sysfs.txt for -more information. - -The kobject infrastructure provides a flexible programming interface, -and allows kobjects and ksets to be used without being registered -(i.e. with no sysfs representation). This is also described later. - - -1. kobjects - -1.1 Description - - -struct kobject is a simple data type that provides a foundation for -more complex object types. It provides a set of basic fields that -almost all complex data types share. kobjects are intended to be -embedded in larger data structures and replace fields they duplicate. - -1.2 Definition - -struct kobject { - const char * k_name; - struct kref kref; - struct list_head entry; - struct kobject * parent; - struct kset * kset; - struct kobj_type * ktype; - struct sysfs_dirent * sd; - wait_queue_head_t poll; -}; - -void kobject_init(struct kobject *); -int kobject_add(struct kobject *); -int kobject_register(struct kobject *); - -void kobject_del(struct kobject *); -void kobject_unregister(struct kobject *); - -struct kobject * kobject_get(struct kobject *); -void kobject_put(struct kobject *); - - -1.3 kobject Programming Interface - -kobjects may be dynamically added and removed from the kobject core -using kobject_register() and kobject_unregister(). Registration -includes inserting the kobject in the list of its dominant kset and -creating a directory for it in sysfs. - -Alternatively, one may use a kobject without adding it to its kset's list -or exporting it via sysfs, by simply calling kobject_init(). An -initialized kobject may later be added to the object hierarchy by -calling kobject_add(). An initialized kobject may be used for -reference counting. - -Note: calling kobject_init() then kobject_add() is functionally -equivalent to calling kobject_register(). - -When a kobject is unregistered, it is removed from its kset's list, -removed from the sysfs filesystem, and its reference count is decremented. -List and sysfs removal happen in kobject_del(), and may be called -manually. kobject_put() decrements the reference count, and may also -be called manually. - -A kobject's reference count may be incremented with kobject_get(), -which returns a valid reference to a kobject; and decremented with -kobject_put(). An object's reference count may only be incremented if -it is already positive. - -When a kobject's reference count reaches 0, the method struct -kobj_type::release() (which the kobject's kset points to) is called. -This allows any memory allocated for the object to be freed. - - -NOTE!!! - -It is _imperative_ that you supply a destructor for dynamically -allocated kobjects to free them if you are using kobject reference -counts. The reference count controls the lifetime of the object. -If it goes to 0, then it is assumed that the object will -be freed and cannot be used. - -More importantly, you must free the object there, and not immediately -after an unregister call. If someone else is referencing the object -(e.g. through a sysfs file), they will obtain a reference to the -object, assume it's valid and operate on it. If the object is -unregistered and freed in the meantime, the operation will then -reference freed memory and go boom. - -This can be prevented, in the simplest case, by defining a release -method and freeing the object from there only. Note that this will not -secure reference count/object management models that use a dual -reference count or do other wacky things with the reference count -(like the networking layer). - - -1.4 sysfs - -Each kobject receives a directory in sysfs. This directory is created -under the kobject's parent directory. - -If a kobject does not have a parent when it is registered, its parent -becomes its dominant kset. - -If a kobject does not have a parent nor a dominant kset, its directory -is created at the top-level of the sysfs partition. - - - -2. ksets - -2.1 Description - -A kset is a set of kobjects that are embedded in the same type. - - -struct kset { - struct kobj_type * ktype; - struct list_head list; - struct kobject kobj; - struct kset_uevent_ops * uevent_ops; -}; - - -void kset_init(struct kset * k); -int kset_add(struct kset * k); -int kset_register(struct kset * k); -void kset_unregister(struct kset * k); - -struct kset * kset_get(struct kset * k); -void kset_put(struct kset * k); - -struct kobject * kset_find_obj(struct kset *, char *); - - -The type that the kobjects are embedded in is described by the ktype -pointer. - -A kset contains a kobject itself, meaning that it may be registered in -the kobject hierarchy and exported via sysfs. More importantly, the -kset may be embedded in a larger data type, and may be part of another -kset (of that object type). - -For example, a block device is an object (struct gendisk) that is -contained in a set of block devices. It may also contain a set of -partitions (struct hd_struct) that have been found on the device. The -following code snippet illustrates how to express this properly. - - struct gendisk * disk; - ... - disk->kset.kobj.kset = &block_kset; - disk->kset.ktype = &partition_ktype; - kset_register(&disk->kset); - -- The kset that the disk's embedded object belongs to is the - block_kset, and is pointed to by disk->kset.kobj.kset. - -- The type of objects on the disk's _subordinate_ list are partitions, - and is set in disk->kset.ktype. - -- The kset is then registered, which handles initializing and adding - the embedded kobject to the hierarchy. - - -2.2 kset Programming Interface - -All kset functions, except kset_find_obj(), eventually forward the -calls to their embedded kobjects after performing kset-specific -operations. ksets offer a similar programming model to kobjects: they -may be used after they are initialized, without registering them in -the hierarchy. - -kset_find_obj() may be used to locate a kobject with a particular -name. The kobject, if found, is returned. - -There are also some helper functions which names point to the formerly -existing "struct subsystem", whose functions have been taken over by -ksets. - - -decl_subsys(name,type,uevent_ops) - -Declares a kset named '_subsys' of type with -uevent_ops . For example, - -decl_subsys(devices, &ktype_device, &device_uevent_ops); - -is equivalent to doing: - -struct kset devices_subsys = { - .ktype = &ktype_devices, - .uevent_ops = &device_uevent_ops, -}; -kobject_set_name(&devices_subsys, name); - -The objects that are registered with a subsystem that use the -subsystem's default list must have their kset ptr set properly. These -objects may have embedded kobjects or ksets. The -following helper makes setting the kset easier: - - -kobj_set_kset_s(obj,subsys) - -- Assumes that obj->kobj exists, and is a struct kobject. -- Sets the kset of that kobject to the kset . - -int subsystem_register(struct kset *s); -void subsystem_unregister(struct kset *s); - -These are just wrappers around the respective kset_* functions. - -2.3 sysfs - -ksets are represented in sysfs when their embedded kobjects are -registered. They follow the same rules of parenting, with one -exception. If a kset does not have a parent, nor is its embedded -kobject part of another kset, the kset's parent becomes its dominant -subsystem. - -If the kset does not have a parent, its directory is created at the -sysfs root. This should only happen when the kset registered is -embedded in a subsystem itself. - - -3. struct ktype - -3.1. Description - -struct kobj_type { - void (*release)(struct kobject *); - struct sysfs_ops * sysfs_ops; - struct attribute ** default_attrs; -}; - - -Object types require specific functions for converting between the -generic object and the more complex type. struct kobj_type provides -the object-specific fields, which include: - -- release: Called when the kobject's reference count reaches 0. This - should convert the object to the more complex type and free it. - -- sysfs_ops: Provides conversion functions for sysfs access. Please - see the sysfs documentation for more information. - -- default_attrs: Default attributes to be exported via sysfs when the - object is registered.Note that the last attribute has to be - initialized to NULL ! You can find a complete implementation - in block/genhd.c - - -Instances of struct kobj_type are not registered; only referenced by -the kset. A kobj_type may be referenced by an arbitrary number of -ksets, as there may be disparate sets of identical objects. - -- cgit v1.2.3-59-g8ed1b From 36d78d6c5b50ba945bbdee9bf1d8daac00154e02 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 27 Nov 2007 11:28:26 -0800 Subject: kobject: update the kobject/kset documentation This provides a much-needed kobject and kset documentation update. Thanks to Kay Sievers, Alan Stern, Jonathan Corbet, Randy Dunlap, Jan Engelhardt, and others for reviewing and providing help with this document. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- Documentation/kobject.txt | 386 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 386 insertions(+) create mode 100644 Documentation/kobject.txt diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt new file mode 100644 index 000000000000..bf3256e04027 --- /dev/null +++ b/Documentation/kobject.txt @@ -0,0 +1,386 @@ +Everything you never wanted to know about kobjects, ksets, and ktypes + +Greg Kroah-Hartman + +Based on an original article by Jon Corbet for lwn.net written October 1, +2003 and located at http://lwn.net/Articles/51437/ + +Last updated December 19, 2007 + + +Part of the difficulty in understanding the driver model - and the kobject +abstraction upon which it is built - is that there is no obvious starting +place. Dealing with kobjects requires understanding a few different types, +all of which make reference to each other. In an attempt to make things +easier, we'll take a multi-pass approach, starting with vague terms and +adding detail as we go. To that end, here are some quick definitions of +some terms we will be working with. + + - A kobject is an object of type struct kobject. Kobjects have a name + and a reference count. A kobject also has a parent pointer (allowing + objects to be arranged into hierarchies), a specific type, and, + usually, a representation in the sysfs virtual filesystem. + + Kobjects are generally not interesting on their own; instead, they are + usually embedded within some other structure which contains the stuff + the code is really interested in. + + No structure should EVER have more than one kobject embedded within it. + If it does, the reference counting for the object is sure to be messed + up and incorrect, and your code will be buggy. So do not do this. + + - A ktype is the type of object that embeds a kobject. Every structure + that embeds a kobject needs a corresponding ktype. The ktype controls + what happens to the kobject when it is created and destroyed. + + - A kset is a group of kobjects. These kobjects can be of the same ktype + or belong to different ktypes. The kset is the basic container type for + collections of kobjects. Ksets contain their own kobjects, but you can + safely ignore that implementation detail as the kset core code handles + this kobject automatically. + + When you see a sysfs directory full of other directories, generally each + of those directories corresponds to a kobject in the same kset. + +We'll look at how to create and manipulate all of these types. A bottom-up +approach will be taken, so we'll go back to kobjects. + + +Embedding kobjects + +It is rare for kernel code to create a standalone kobject, with one major +exception explained below. Instead, kobjects are used to control access to +a larger, domain-specific object. To this end, kobjects will be found +embedded in other structures. If you are used to thinking of things in +object-oriented terms, kobjects can be seen as a top-level, abstract class +from which other classes are derived. A kobject implements a set of +capabilities which are not particularly useful by themselves, but which are +nice to have in other objects. The C language does not allow for the +direct expression of inheritance, so other techniques - such as structure +embedding - must be used. + +So, for example, the UIO code has a structure that defines the memory +region associated with a uio device: + +struct uio_mem { + struct kobject kobj; + unsigned long addr; + unsigned long size; + int memtype; + void __iomem *internal_addr; +}; + +If you have a struct uio_mem structure, finding its embedded kobject is +just a matter of using the kobj member. Code that works with kobjects will +often have the opposite problem, however: given a struct kobject pointer, +what is the pointer to the containing structure? You must avoid tricks +(such as assuming that the kobject is at the beginning of the structure) +and, instead, use the container_of() macro, found in : + + container_of(pointer, type, member) + +where pointer is the pointer to the embedded kobject, type is the type of +the containing structure, and member is the name of the structure field to +which pointer points. The return value from container_of() is a pointer to +the given type. So, for example, a pointer "kp" to a struct kobject +embedded within a struct uio_mem could be converted to a pointer to the +containing uio_mem structure with: + + struct uio_mem *u_mem = container_of(kp, struct uio_mem, kobj); + +Programmers often define a simple macro for "back-casting" kobject pointers +to the containing type. + + +Initialization of kobjects + +Code which creates a kobject must, of course, initialize that object. Some +of the internal fields are setup with a (mandatory) call to kobject_init(): + + void kobject_init(struct kobject *kobj, struct kobj_type *ktype); + +The ktype is required for a kobject to be created properly, as every kobject +must have an associated kobj_type. After calling kobject_init(), to +register the kobject with sysfs, the function kobject_add() must be called: + + int kobject_add(struct kobject *kobj, struct kobject *parent, const char *fmt, ...); + +This sets up the parent of the kobject and the name for the kobject +properly. If the kobject is to be associated with a specific kset, +kobj->kset must be assigned before calling kobject_add(). If a kset is +associated with a kobject, then the parent for the kobject can be set to +NULL in the call to kobject_add() and then the kobject's parent will be the +kset itself. + +As the name of the kobject is set when it is added to the kernel, the name +of the kobject should never be manipulated directly. If you must change +the name of the kobject, call kobject_rename(): + + int kobject_rename(struct kobject *kobj, const char *new_name); + +There is a function called kobject_set_name() but that is legacy cruft and +is being removed. If your code needs to call this function, it is +incorrect and needs to be fixed. + +To properly access the name of the kobject, use the function +kobject_name(): + + const char *kobject_name(const struct kobject * kobj); + +There is a helper function to both initialize and add the kobject to the +kernel at the same time, called supprisingly enough kobject_init_and_add(): + + int kobject_init_and_add(struct kobject *kobj, struct kobj_type *ktype, + struct kobject *parent, const char *fmt, ...); + +The arguments are the same as the individual kobject_init() and +kobject_add() functions described above. + + +Uevents + +After a kobject has been registered with the kobject core, you need to +announce to the world that it has been created. This can be done with a +call to kobject_uevent(): + + int kobject_uevent(struct kobject *kobj, enum kobject_action action); + +Use the KOBJ_ADD action for when the kobject is first added to the kernel. +This should be done only after any attributes or children of the kobject +have been initialized properly, as userspace will instantly start to look +for them when this call happens. + +When the kobject is removed from the kernel (details on how to do that is +below), the uevent for KOBJ_REMOVE will be automatically created by the +kobject core, so the caller does not have to worry about doing that by +hand. + + +Reference counts + +One of the key functions of a kobject is to serve as a reference counter +for the object in which it is embedded. As long as references to the object +exist, the object (and the code which supports it) must continue to exist. +The low-level functions for manipulating a kobject's reference counts are: + + struct kobject *kobject_get(struct kobject *kobj); + void kobject_put(struct kobject *kobj); + +A successful call to kobject_get() will increment the kobject's reference +counter and return the pointer to the kobject. + +When a reference is released, the call to kobject_put() will decrement the +reference count and, possibly, free the object. Note that kobject_init() +sets the reference count to one, so the code which sets up the kobject will +need to do a kobject_put() eventually to release that reference. + +Because kobjects are dynamic, they must not be declared statically or on +the stack, but instead, always allocated dynamically. Future versions of +the kernel will contain a run-time check for kobjects that are created +statically and will warn the developer of this improper usage. + +If all that you want to use a kobject for is to provide a reference counter +for your structure, please use the struct kref instead; a kobject would be +overkill. For more information on how to use struct kref, please see the +file Documentation/kref.txt in the Linux kernel source tree. + + +Creating "simple" kobjects + +Sometimes all that a developer wants is a way to create a simple directory +in the sysfs hierarchy, and not have to mess with the whole complication of +ksets, show and store functions, and other details. This is the one +exception where a single kobject should be created. To create such an +entry, use the function: + + struct kobject *kobject_create_and_add(char *name, struct kobject *parent); + +This function will create a kobject and place it in sysfs in the location +underneath the specified parent kobject. To create simple attributes +associated with this kobject, use: + + int sysfs_create_file(struct kobject *kobj, struct attribute *attr); +or + int sysfs_create_group(struct kobject *kobj, struct attribute_group *grp); + +Both types of attributes used here, with a kobject that has been created +with the kobject_create_and_add(), can be of type kobj_attribute, so no +special custom attribute is needed to be created. + +See the example module, samples/kobject/kobject-example.c for an +implementation of a simple kobject and attributes. + + + +ktypes and release methods + +One important thing still missing from the discussion is what happens to a +kobject when its reference count reaches zero. The code which created the +kobject generally does not know when that will happen; if it did, there +would be little point in using a kobject in the first place. Even +predictable object lifecycles become more complicated when sysfs is brought +in as other portions of the kernel can get a reference on any kobject that +is registered in the system. + +The end result is that a structure protected by a kobject cannot be freed +before its reference count goes to zero. The reference count is not under +the direct control of the code which created the kobject. So that code must +be notified asynchronously whenever the last reference to one of its +kobjects goes away. + +Once you registered your kobject via kobject_add(), you must never use +kfree() to free it directly. The only safe way is to use kobject_put(). It +is good practice to always use kobject_put() after kobject_init() to avoid +errors creeping in. + +This notification is done through a kobject's release() method. Usually +such a method has a form like: + + void my_object_release(struct kobject *kobj) + { + struct my_object *mine = container_of(kobj, struct my_object, kobj); + + /* Perform any additional cleanup on this object, then... */ + kfree(mine); + } + +One important point cannot be overstated: every kobject must have a +release() method, and the kobject must persist (in a consistent state) +until that method is called. If these constraints are not met, the code is +flawed. Note that the kernel will warn you if you forget to provide a +release() method. Do not try to get rid of this warning by providing an +"empty" release function; you will be mocked mercilessly by the kobject +maintainer if you attempt this. + +Note, the name of the kobject is available in the release function, but it +must NOT be changed within this callback. Otherwise there will be a memory +leak in the kobject core, which makes people unhappy. + +Interestingly, the release() method is not stored in the kobject itself; +instead, it is associated with the ktype. So let us introduce struct +kobj_type: + + struct kobj_type { + void (*release)(struct kobject *); + struct sysfs_ops *sysfs_ops; + struct attribute **default_attrs; + }; + +This structure is used to describe a particular type of kobject (or, more +correctly, of containing object). Every kobject needs to have an associated +kobj_type structure; a pointer to that structure must be specified when you +call kobject_init() or kobject_init_and_add(). + +The release field in struct kobj_type is, of course, a pointer to the +release() method for this type of kobject. The other two fields (sysfs_ops +and default_attrs) control how objects of this type are represented in +sysfs; they are beyond the scope of this document. + +The default_attrs pointer is a list of default attributes that will be +automatically created for any kobject that is registered with this ktype. + + +ksets + +A kset is merely a collection of kobjects that want to be associated with +each other. There is no restriction that they be of the same ktype, but be +very careful if they are not. + +A kset serves these functions: + + - It serves as a bag containing a group of objects. A kset can be used by + the kernel to track "all block devices" or "all PCI device drivers." + + - A kset is also a subdirectory in sysfs, where the associated kobjects + with the kset can show up. Every kset contains a kobject which can be + set up to be the parent of other kobjects; the top-level directories of + the sysfs hierarchy are constructed in this way. + + - Ksets can support the "hotplugging" of kobjects and influence how + uevent events are reported to user space. + +In object-oriented terms, "kset" is the top-level container class; ksets +contain their own kobject, but that kobject is managed by the kset code and +should not be manipulated by any other user. + +A kset keeps its children in a standard kernel linked list. Kobjects point +back to their containing kset via their kset field. In almost all cases, +the kobjects belonging to a ket have that kset (or, strictly, its embedded +kobject) in their parent. + +As a kset contains a kobject within it, it should always be dynamically +created and never declared statically or on the stack. To create a new +kset use: + struct kset *kset_create_and_add(const char *name, + struct kset_uevent_ops *u, + struct kobject *parent); + +When you are finished with the kset, call: + void kset_unregister(struct kset *kset); +to destroy it. + +An example of using a kset can be seen in the +samples/kobject/kset-example.c file in the kernel tree. + +If a kset wishes to control the uevent operations of the kobjects +associated with it, it can use the struct kset_uevent_ops to handle it: + +struct kset_uevent_ops { + int (*filter)(struct kset *kset, struct kobject *kobj); + const char *(*name)(struct kset *kset, struct kobject *kobj); + int (*uevent)(struct kset *kset, struct kobject *kobj, + struct kobj_uevent_env *env); +}; + + +The filter function allows a kset to prevent a uevent from being emitted to +userspace for a specific kobject. If the function returns 0, the uevent +will not be emitted. + +The name function will be called to override the default name of the kset +that the uevent sends to userspace. By default, the name will be the same +as the kset itself, but this function, if present, can override that name. + +The uevent function will be called when the uevent is about to be sent to +userspace to allow more environment variables to be added to the uevent. + +One might ask how, exactly, a kobject is added to a kset, given that no +functions which perform that function have been presented. The answer is +that this task is handled by kobject_add(). When a kobject is passed to +kobject_add(), its kset member should point to the kset to which the +kobject will belong. kobject_add() will handle the rest. + +If the kobject belonging to a kset has no parent kobject set, it will be +added to the kset's directory. Not all members of a kset do necessarily +live in the kset directory. If an explicit parent kobject is assigned +before the kobject is added, the kobject is registered with the kset, but +added below the parent kobject. + + +Kobject removal + +After a kobject has been registered with the kobject core successfully, it +must be cleaned up when the code is finished with it. To do that, call +kobject_put(). By doing this, the kobject core will automatically clean up +all of the memory allocated by this kobject. If a KOBJ_ADD uevent has been +sent for the object, a corresponding KOBJ_REMOVE uevent will be sent, and +any other sysfs housekeeping will be handled for the caller properly. + +If you need to do a two-stage delete of the kobject (say you are not +allowed to sleep when you need to destroy the object), then call +kobject_del() which will unregister the kobject from sysfs. This makes the +kobject "invisible", but it is not cleaned up, and the reference count of +the object is still the same. At a later time call kobject_put() to finish +the cleanup of the memory associated with the kobject. + +kobject_del() can be used to drop the reference to the parent object, if +circular references are constructed. It is valid in some cases, that a +parent objects references a child. Circular references _must_ be broken +with an explicit call to kobject_del(), so that a release functions will be +called, and the objects in the former circle release each other. + + +Example code to copy from + +For a more complete example of using ksets and kobjects properly, see the +sample/kobject/kset-example.c code. -- cgit v1.2.3-59-g8ed1b From 40efcb05f213180b7cc8fd8d963377305f236c28 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 27 Nov 2007 11:28:26 -0800 Subject: kobject: add sample code for how to use kobjects in a simple manner. This is a simple kobject module, showing how to use kobj_attributes in basic and more complex ways. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- samples/Kconfig | 10 +++ samples/Makefile | 2 +- samples/kobject/Makefile | 1 + samples/kobject/kobject-example.c | 137 ++++++++++++++++++++++++++++++++++++++ 4 files changed, 149 insertions(+), 1 deletion(-) create mode 100644 samples/kobject/Makefile create mode 100644 samples/kobject/kobject-example.c diff --git a/samples/Kconfig b/samples/Kconfig index 57bb2236952c..74d97cc24787 100644 --- a/samples/Kconfig +++ b/samples/Kconfig @@ -13,4 +13,14 @@ config SAMPLE_MARKERS help This build markers example modules. +config SAMPLE_KOBJECT + tristate "Build kobject examples" + help + This config option will allow you to build a number of + different kobject sample modules showing how to use kobjects, + ksets, and ktypes properly. + + If in doubt, say "N" here. + endif # SAMPLES + diff --git a/samples/Makefile b/samples/Makefile index 5a4f0b6bcbed..8652d0f268ad 100644 --- a/samples/Makefile +++ b/samples/Makefile @@ -1,3 +1,3 @@ # Makefile for Linux samples code -obj-$(CONFIG_SAMPLES) += markers/ +obj-$(CONFIG_SAMPLES) += markers/ kobject/ diff --git a/samples/kobject/Makefile b/samples/kobject/Makefile new file mode 100644 index 000000000000..cce16e99fde5 --- /dev/null +++ b/samples/kobject/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_SAMPLE_KOBJECT) += kobject-example.o diff --git a/samples/kobject/kobject-example.c b/samples/kobject/kobject-example.c new file mode 100644 index 000000000000..08d0d3ff3263 --- /dev/null +++ b/samples/kobject/kobject-example.c @@ -0,0 +1,137 @@ +/* + * Sample kobject implementation + * + * Copyright (C) 2004-2007 Greg Kroah-Hartman + * Copyright (C) 2007 Novell Inc. + * + * Released under the GPL version 2 only. + * + */ +#include +#include +#include +#include +#include + +/* + * This module shows how to create a simple subdirectory in sysfs called + * /sys/kernel/kobject-example In that directory, 3 files are created: + * "foo", "baz", and "bar". If an integer is written to these files, it can be + * later read out of it. + */ + +static int foo; +static int baz; +static int bar; + +/* + * The "foo" file where a static variable is read from and written to. + */ +static ssize_t foo_show(struct kobject *kobj, struct kobj_attribute *attr, + char *buf) +{ + return sprintf(buf, "%d\n", foo); +} + +static ssize_t foo_store(struct kobject *kobj, struct kobj_attribute *attr, + const char *buf, size_t count) +{ + sscanf(buf, "%du", &foo); + return count; +} + +static struct kobj_attribute foo_attribute = + __ATTR(foo, 0666, foo_show, foo_store); + +/* + * More complex function where we determine which varible is being accessed by + * looking at the attribute for the "baz" and "bar" files. + */ +static ssize_t b_show(struct kobject *kobj, struct kobj_attribute *attr, + char *buf) +{ + int var; + + if (strcmp(attr->attr.name, "baz") == 0) + var = baz; + else + var = bar; + return sprintf(buf, "%d\n", var); +} + +static ssize_t b_store(struct kobject *kobj, struct kobj_attribute *attr, + const char *buf, size_t count) +{ + int var; + + sscanf(buf, "%du", &var); + if (strcmp(attr->attr.name, "baz") == 0) + baz = var; + else + bar = var; + return count; +} + +static struct kobj_attribute baz_attribute = + __ATTR(baz, 0666, b_show, b_store); +static struct kobj_attribute bar_attribute = + __ATTR(bar, 0666, b_show, b_store); + + +/* + * Create a group of attributes so that we can create and destory them all + * at once. + */ +static struct attribute *attrs[] = { + &foo_attribute.attr, + &baz_attribute.attr, + &bar_attribute.attr, + NULL, /* need to NULL terminate the list of attributes */ +}; + +/* + * An unnamed attribute group will put all of the attributes directly in + * the kobject directory. If we specify a name, a subdirectory will be + * created for the attributes with the directory being the name of the + * attribute group. + */ +static struct attribute_group attr_group = { + .attrs = attrs, +}; + +static struct kobject *example_kobj; + +static int example_init(void) +{ + int retval; + + /* + * Create a simple kobject with the name of "kobject_example", + * located under /sys/kernel/ + * + * As this is a simple directory, no uevent will be sent to + * userspace. That is why this function should not be used for + * any type of dynamic kobjects, where the name and number are + * not known ahead of time. + */ + example_kobj = kobject_create_and_add("kobject_example", kernel_kobj); + if (!example_kobj) + return -ENOMEM; + + /* Create the files associated with this kobject */ + retval = sysfs_create_group(example_kobj, &attr_group); + if (retval) + kobject_put(example_kobj); + + return retval; +} + +static void example_exit(void) +{ + kobject_put(example_kobj); +} + +module_init(example_init); +module_exit(example_exit); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Greg Kroah-Hartman "); -- cgit v1.2.3-59-g8ed1b From 44bfe16e1083d66f97a5289e359c52ee2c8b19a7 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 27 Nov 2007 11:28:26 -0800 Subject: kobject: add sample code for how to use ksets/ktypes/kobjects This is a more complex example showing how to create a kset and a ktype and some default attributes for a group of kobjects. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- samples/kobject/Makefile | 2 +- samples/kobject/kset-example.c | 278 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 279 insertions(+), 1 deletion(-) create mode 100644 samples/kobject/kset-example.c diff --git a/samples/kobject/Makefile b/samples/kobject/Makefile index cce16e99fde5..4a194203c982 100644 --- a/samples/kobject/Makefile +++ b/samples/kobject/Makefile @@ -1 +1 @@ -obj-$(CONFIG_SAMPLE_KOBJECT) += kobject-example.o +obj-$(CONFIG_SAMPLE_KOBJECT) += kobject-example.o kset-example.o diff --git a/samples/kobject/kset-example.c b/samples/kobject/kset-example.c new file mode 100644 index 000000000000..b0a1b4fe6584 --- /dev/null +++ b/samples/kobject/kset-example.c @@ -0,0 +1,278 @@ +/* + * Sample kset and ktype implementation + * + * Copyright (C) 2004-2007 Greg Kroah-Hartman + * Copyright (C) 2007 Novell Inc. + * + * Released under the GPL version 2 only. + * + */ +#include +#include +#include +#include +#include + +/* + * This module shows how to create a kset in sysfs called + * /sys/kernel/kset-example + * Then tree kobjects are created and assigned to this kset, "foo", "baz", + * and "bar". In those kobjects, attributes of the same name are also + * created and if an integer is written to these files, it can be later + * read out of it. + */ + + +/* + * This is our "object" that we will create a few of and register them with + * sysfs. + */ +struct foo_obj { + struct kobject kobj; + int foo; + int baz; + int bar; +}; +#define to_foo_obj(x) container_of(x, struct foo_obj, kobj) + +/* a custom attribute that works just for a struct foo_obj. */ +struct foo_attribute { + struct attribute attr; + ssize_t (*show)(struct foo_obj *foo, struct foo_attribute *attr, char *buf); + ssize_t (*store)(struct foo_obj *foo, struct foo_attribute *attr, const char *buf, size_t count); +}; +#define to_foo_attr(x) container_of(x, struct foo_attribute, attr) + +/* + * The default show function that must be passed to sysfs. This will be + * called by sysfs for whenever a show function is called by the user on a + * sysfs file associated with the kobjects we have registered. We need to + * transpose back from a "default" kobject to our custom struct foo_obj and + * then call the show function for that specific object. + */ +static ssize_t foo_attr_show(struct kobject *kobj, + struct attribute *attr, + char *buf) +{ + struct foo_attribute *attribute; + struct foo_obj *foo; + + attribute = to_foo_attr(attr); + foo = to_foo_obj(kobj); + + if (!attribute->show) + return -EIO; + + return attribute->show(foo, attribute, buf); +} + +/* + * Just like the default show function above, but this one is for when the + * sysfs "store" is requested (when a value is written to a file.) + */ +static ssize_t foo_attr_store(struct kobject *kobj, + struct attribute *attr, + const char *buf, size_t len) +{ + struct foo_attribute *attribute; + struct foo_obj *foo; + + attribute = to_foo_attr(attr); + foo = to_foo_obj(kobj); + + if (!attribute->store) + return -EIO; + + return attribute->store(foo, attribute, buf, len); +} + +/* Our custom sysfs_ops that we will associate with our ktype later on */ +static struct sysfs_ops foo_sysfs_ops = { + .show = foo_attr_show, + .store = foo_attr_store, +}; + +/* + * The release function for our object. This is REQUIRED by the kernel to + * have. We free the memory held in our object here. + * + * NEVER try to get away with just a "blank" release function to try to be + * smarter than the kernel. Turns out, no one ever is... + */ +static void foo_release(struct kobject *kobj) +{ + struct foo_obj *foo; + + foo = to_foo_obj(kobj); + kfree(foo); +} + +/* + * The "foo" file where the .foo variable is read from and written to. + */ +static ssize_t foo_show(struct foo_obj *foo_obj, struct foo_attribute *attr, + char *buf) +{ + return sprintf(buf, "%d\n", foo_obj->foo); +} + +static ssize_t foo_store(struct foo_obj *foo_obj, struct foo_attribute *attr, + const char *buf, size_t count) +{ + sscanf(buf, "%du", &foo_obj->foo); + return count; +} + +static struct foo_attribute foo_attribute = + __ATTR(foo, 0666, foo_show, foo_store); + +/* + * More complex function where we determine which varible is being accessed by + * looking at the attribute for the "baz" and "bar" files. + */ +static ssize_t b_show(struct foo_obj *foo_obj, struct foo_attribute *attr, + char *buf) +{ + int var; + + if (strcmp(attr->attr.name, "baz") == 0) + var = foo_obj->baz; + else + var = foo_obj->bar; + return sprintf(buf, "%d\n", var); +} + +static ssize_t b_store(struct foo_obj *foo_obj, struct foo_attribute *attr, + const char *buf, size_t count) +{ + int var; + + sscanf(buf, "%du", &var); + if (strcmp(attr->attr.name, "baz") == 0) + foo_obj->baz = var; + else + foo_obj->bar = var; + return count; +} + +static struct foo_attribute baz_attribute = + __ATTR(baz, 0666, b_show, b_store); +static struct foo_attribute bar_attribute = + __ATTR(bar, 0666, b_show, b_store); + +/* + * Create a group of attributes so that we can create and destory them all + * at once. + */ +static struct attribute *foo_default_attrs[] = { + &foo_attribute.attr, + &baz_attribute.attr, + &bar_attribute.attr, + NULL, /* need to NULL terminate the list of attributes */ +}; + +/* + * Our own ktype for our kobjects. Here we specify our sysfs ops, the + * release function, and the set of default attributes we want created + * whenever a kobject of this type is registered with the kernel. + */ +static struct kobj_type foo_ktype = { + .sysfs_ops = &foo_sysfs_ops, + .release = foo_release, + .default_attrs = foo_default_attrs, +}; + +static struct kset *example_kset; +static struct foo_obj *foo_obj; +static struct foo_obj *bar_obj; +static struct foo_obj *baz_obj; + +static struct foo_obj *create_foo_obj(const char *name) +{ + struct foo_obj *foo; + int retval; + + /* allocate the memory for the whole object */ + foo = kzalloc(sizeof(*foo), GFP_KERNEL); + if (!foo) + return NULL; + + /* + * As we have a kset for this kobject, we need to set it before calling + * the kobject core. + */ + foo->kobj.kset = example_kset; + + /* + * Initialize and add the kobject to the kernel. All the default files + * will be created here. As we have already specified a kset for this + * kobject, we don't have to set a parent for the kobject, the kobject + * will be placed beneath that kset automatically. + */ + retval = kobject_init_and_add(&foo->kobj, &foo_ktype, NULL, "%s", name); + if (retval) { + kfree(foo); + return NULL; + } + + /* + * We are always responsible for sending the uevent that the kobject + * was added to the system. + */ + kobject_uevent(&foo->kobj, KOBJ_ADD); + + return foo; +} + +static void destroy_foo_obj(struct foo_obj *foo) +{ + kobject_put(&foo->kobj); +} + +static int example_init(void) +{ + /* + * Create a kset with the name of "kset_example", + * located under /sys/kernel/ + */ + example_kset = kset_create_and_add("kset_example", NULL, kernel_kobj); + if (!example_kset) + return -ENOMEM; + + /* + * Create three objects and register them with our kset + */ + foo_obj = create_foo_obj("foo"); + if (!foo_obj) + goto foo_error; + + bar_obj = create_foo_obj("bar"); + if (!bar_obj) + goto bar_error; + + baz_obj = create_foo_obj("baz"); + if (!baz_obj) + goto baz_error; + + return 0; + +baz_error: + destroy_foo_obj(bar_obj); +bar_error: + destroy_foo_obj(foo_obj); +foo_error: + return -EINVAL; +} + +static void example_exit(void) +{ + destroy_foo_obj(baz_obj); + destroy_foo_obj(bar_obj); + destroy_foo_obj(foo_obj); + kset_unregister(example_kset); +} + +module_init(example_init); +module_exit(example_exit); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Greg Kroah-Hartman "); -- cgit v1.2.3-59-g8ed1b From db1118a460c7bfd20278955cbf56c0b283a9701f Mon Sep 17 00:00:00 2001 From: Denis Cheng Date: Thu, 6 Dec 2007 02:24:40 +0800 Subject: Driver core: use LIST_HEAD instead of call to INIT_LIST_HEAD in __init LIST_HEAD has been widely used, so switch to this simpler method. Signed-off-by: Denis Cheng Signed-off-by: Greg Kroah-Hartman --- drivers/base/attribute_container.c | 9 +-------- drivers/base/base.h | 1 - drivers/base/init.c | 1 - 3 files changed, 1 insertion(+), 10 deletions(-) diff --git a/drivers/base/attribute_container.c b/drivers/base/attribute_container.c index 7370d7cf5988..d4dfb97de3b0 100644 --- a/drivers/base/attribute_container.c +++ b/drivers/base/attribute_container.c @@ -61,7 +61,7 @@ attribute_container_classdev_to_container(struct class_device *classdev) } EXPORT_SYMBOL_GPL(attribute_container_classdev_to_container); -static struct list_head attribute_container_list; +static LIST_HEAD(attribute_container_list); static DEFINE_MUTEX(attribute_container_mutex); @@ -429,10 +429,3 @@ attribute_container_find_class_device(struct attribute_container *cont, return cdev; } EXPORT_SYMBOL_GPL(attribute_container_find_class_device); - -int __init -attribute_container_init(void) -{ - INIT_LIST_HEAD(&attribute_container_list); - return 0; -} diff --git a/drivers/base/base.h b/drivers/base/base.h index 3b0f395552db..a74ceda34e19 100644 --- a/drivers/base/base.h +++ b/drivers/base/base.h @@ -49,7 +49,6 @@ static inline int hypervisor_init(void) { return 0; } extern int platform_bus_init(void); extern int system_bus_init(void); extern int cpu_dev_init(void); -extern int attribute_container_init(void); extern int bus_add_device(struct device * dev); extern void bus_attach_device(struct device * dev); diff --git a/drivers/base/init.c b/drivers/base/init.c index 37138154f9e8..1da88a10cfec 100644 --- a/drivers/base/init.c +++ b/drivers/base/init.c @@ -36,5 +36,4 @@ void __init driver_init(void) system_bus_init(); cpu_dev_init(); memory_dev_init(); - attribute_container_init(); } -- cgit v1.2.3-59-g8ed1b From 9148fe8767dc8612b2e66d11126744d6436cc94e Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 31 Dec 2007 10:05:34 -0800 Subject: sysfs: make SYSFS_DEPRECATED depend on SYSFS Make SYSFS_DEPRECATED depend on SYSFS since files that check CONFIG_SYSFS_DEPRECATED don't check for CONFIG_SYSFS first. Also don't prompt user about SYSFS_DEPRECATED if SYSFS=n. Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- init/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/init/Kconfig b/init/Kconfig index b9d11a899b88..f5becd2a12f6 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -363,6 +363,7 @@ config CGROUP_CPUACCT config SYSFS_DEPRECATED bool "Create deprecated sysfs files" + depends on SYSFS default y help This option creates deprecated symlinks such as the -- cgit v1.2.3-59-g8ed1b From 92b421416f8194aec87b1439487b5544e9ac8187 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 31 Dec 2007 10:05:43 -0800 Subject: driver core: fix build with SYSFS=n When SYSFS=n and MODULES=y, build ends with: linux-2.6.24-rc6-mm1/drivers/base/module.c: In function 'module_add_driver': linux-2.6.24-rc6-mm1/drivers/base/module.c:49: error: 'module_kset' undeclared (first use in this function) make[3]: *** [drivers/base/module.o] Error 1 Below is one possible fix. Build-tested with all 4 config combinations of SYSFS & MODULES. Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/base/Makefile | 2 ++ drivers/base/base.h | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/base/Makefile b/drivers/base/Makefile index ff2696823f8d..63e09c015ca0 100644 --- a/drivers/base/Makefile +++ b/drivers/base/Makefile @@ -11,7 +11,9 @@ obj-$(CONFIG_FW_LOADER) += firmware_class.o obj-$(CONFIG_NUMA) += node.o obj-$(CONFIG_MEMORY_HOTPLUG_SPARSE) += memory.o obj-$(CONFIG_SMP) += topology.o +ifeq ($(CONFIG_SYSFS),y) obj-$(CONFIG_MODULES) += module.o +endif obj-$(CONFIG_SYS_HYPERVISOR) += hypervisor.o ifeq ($(CONFIG_DEBUG_DRIVER),y) diff --git a/drivers/base/base.h b/drivers/base/base.h index a74ceda34e19..f7ad65a249cb 100644 --- a/drivers/base/base.h +++ b/drivers/base/base.h @@ -81,7 +81,7 @@ extern int devres_release_all(struct device *dev); extern struct kset *devices_kset; -#ifdef CONFIG_MODULES +#if defined(CONFIG_MODULES) && defined(CONFIG_SYSFS) extern void module_add_driver(struct module *mod, struct device_driver *drv); extern void module_remove_driver(struct device_driver *drv); #else -- cgit v1.2.3-59-g8ed1b From ae72cddb2338bc36b991674a56a7bf70ae104d9e Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 11 Jan 2008 17:24:53 +1100 Subject: Driver Core: constify the name passed to platform_device_register_simple This name is just passed to platform_device_alloc which has its parameter declared const. Signed-off-by: Stephen Rothwell Signed-off-by: Greg Kroah-Hartman --- drivers/base/platform.c | 2 +- include/linux/platform_device.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/base/platform.c b/drivers/base/platform.c index bdd59e8358f0..48d5db4f92ee 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -360,7 +360,7 @@ EXPORT_SYMBOL_GPL(platform_device_unregister); * the Linux driver model. In particular, when such drivers are built * as modules, they can't be "hotplugged". */ -struct platform_device *platform_device_register_simple(char *name, int id, +struct platform_device *platform_device_register_simple(const char *name, int id, struct resource *res, unsigned int num) { struct platform_device *pdev; diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h index e80804316cdb..3261681c82a4 100644 --- a/include/linux/platform_device.h +++ b/include/linux/platform_device.h @@ -35,7 +35,7 @@ extern struct resource *platform_get_resource_byname(struct platform_device *, u extern int platform_get_irq_byname(struct platform_device *, char *); extern int platform_add_devices(struct platform_device **, int); -extern struct platform_device *platform_device_register_simple(char *, int id, +extern struct platform_device *platform_device_register_simple(const char *, int id, struct resource *, unsigned int); extern struct platform_device *platform_device_alloc(const char *name, int id); -- cgit v1.2.3-59-g8ed1b From 4f0146919be6bff47b5ea97252bcec0286e4dd19 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Tue, 22 Jan 2008 20:50:54 +0100 Subject: UIO: constify function pointer tables Signed-off-by: Jan Engelhardt Signed-off-by: Greg Kroah-Hartman --- drivers/uio/uio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c index 03b66fb734a6..cc246faa3590 100644 --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -39,7 +39,7 @@ struct uio_device { static int uio_major; static DEFINE_IDR(uio_idr); -static struct file_operations uio_fops; +static const struct file_operations uio_fops; /* UIO class infrastructure */ static struct uio_class { @@ -508,7 +508,7 @@ static int uio_mmap(struct file *filep, struct vm_area_struct *vma) } } -static struct file_operations uio_fops = { +static const struct file_operations uio_fops = { .owner = THIS_MODULE, .open = uio_open, .release = uio_release, -- cgit v1.2.3-59-g8ed1b From 63b6971a0876b744e2fcf3c9df15d130501e1deb Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Mon, 21 Jan 2008 16:09:44 +0100 Subject: Driver core: Cleanup get_device_parent() in device_add() and device_move() Make setup_parent() void as get_device_parent() will always return either a valid kobject or NULL. Introduce cleanup_glue_dir() to drop reference grabbed on "glue" directory by get_device_parent(). Use it for cleanup in device_move() and device_add() on errors. This should fix the refcounting problem reported in http://marc.info/?l=linux-kernel&m=120052487909200&w=2 Signed-off-by: Cornelia Huck Cc: Dave Young Cc: Gabor Gombas Cc: Tejun Heo Cc: Al Viro Cc: Marcel Holtmann Cc: David Miller Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 29 ++++++++++++++--------------- 1 file changed, 14 insertions(+), 15 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index d5d542db96fd..f09dde3b1e27 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -552,6 +552,8 @@ static struct kobject *get_device_parent(struct device *dev, } static inline void cleanup_device_parent(struct device *dev) {} +static inline void cleanup_glue_dir(struct device *dev, + struct kobject *glue_dir) {} #else static struct kobject *virtual_device_parent(struct device *dev) { @@ -616,27 +618,27 @@ static struct kobject *get_device_parent(struct device *dev, return NULL; } -static void cleanup_device_parent(struct device *dev) +static void cleanup_glue_dir(struct device *dev, struct kobject *glue_dir) { - struct kobject *glue_dir = dev->kobj.parent; - /* see if we live in a "glue" directory */ if (!dev->class || glue_dir->kset != &dev->class->class_dirs) return; kobject_put(glue_dir); } + +static void cleanup_device_parent(struct device *dev) +{ + cleanup_glue_dir(dev, dev->kobj.parent); +} #endif -static int setup_parent(struct device *dev, struct device *parent) +static void setup_parent(struct device *dev, struct device *parent) { struct kobject *kobj; kobj = get_device_parent(dev, parent); - if (IS_ERR(kobj)) - return PTR_ERR(kobj); if (kobj) dev->kobj.parent = kobj; - return 0; } static int device_add_class_symlinks(struct device *dev) @@ -784,9 +786,7 @@ int device_add(struct device *dev) pr_debug("device: '%s': %s\n", dev->bus_id, __FUNCTION__); parent = get_device(dev->parent); - error = setup_parent(dev, parent); - if (error) - goto Error; + setup_parent(dev, parent); /* first, register with generic layer. */ error = kobject_add(&dev->kobj, dev->kobj.parent, "%s", dev->bus_id); @@ -864,6 +864,7 @@ int device_add(struct device *dev) kobject_uevent(&dev->kobj, KOBJ_REMOVE); kobject_del(&dev->kobj); Error: + cleanup_device_parent(dev); if (parent) put_device(parent); goto Done; @@ -1344,15 +1345,12 @@ int device_move(struct device *dev, struct device *new_parent) new_parent = get_device(new_parent); new_parent_kobj = get_device_parent (dev, new_parent); - if (IS_ERR(new_parent_kobj)) { - error = PTR_ERR(new_parent_kobj); - put_device(new_parent); - goto out; - } + pr_debug("device: '%s': %s: moving to '%s'\n", dev->bus_id, __FUNCTION__, new_parent ? new_parent->bus_id : ""); error = kobject_move(&dev->kobj, new_parent_kobj); if (error) { + cleanup_glue_dir(dev, new_parent_kobj); put_device(new_parent); goto out; } @@ -1375,6 +1373,7 @@ int device_move(struct device *dev, struct device *new_parent) klist_add_tail(&dev->knode_parent, &old_parent->klist_children); } + cleanup_glue_dir(dev, new_parent_kobj); put_device(new_parent); goto out; } -- cgit v1.2.3-59-g8ed1b From fd04897bb20be29d60f7e426a053545aebeaa61a Mon Sep 17 00:00:00 2001 From: Dave Young Date: Tue, 22 Jan 2008 15:27:08 +0800 Subject: Driver Core: add class iteration api Add the following class iteration functions for driver use: class_for_each_device class_find_device class_for_each_child class_find_child Signed-off-by: Dave Young Acked-by: Cornelia Huck Signed-off-by: Greg Kroah-Hartman --- drivers/base/class.c | 133 +++++++++++++++++++++++++++++++++++++++++++++++++ include/linux/device.h | 9 +++- 2 files changed, 140 insertions(+), 2 deletions(-) diff --git a/drivers/base/class.c b/drivers/base/class.c index b962a76875d2..9f737ff0fc71 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -809,6 +809,139 @@ void class_device_put(struct class_device *class_dev) kobject_put(&class_dev->kobj); } +/** + * class_for_each_device - device iterator + * @class: the class we're iterating + * @data: data for the callback + * @fn: function to be called for each device + * + * Iterate over @class's list of devices, and call @fn for each, + * passing it @data. + * + * We check the return of @fn each time. If it returns anything + * other than 0, we break out and return that value. + * + * Note, we hold class->sem in this function, so it can not be + * re-acquired in @fn, otherwise it will self-deadlocking. For + * example, calls to add or remove class members would be verboten. + */ +int class_for_each_device(struct class *class, void *data, + int (*fn)(struct device *, void *)) +{ + struct device *dev; + int error = 0; + + if (!class) + return -EINVAL; + down(&class->sem); + list_for_each_entry(dev, &class->devices, node) { + dev = get_device(dev); + if (dev) { + error = fn(dev, data); + put_device(dev); + } else + error = -ENODEV; + if (error) + break; + } + up(&class->sem); + + return error; +} +EXPORT_SYMBOL_GPL(class_for_each_device); + +/** + * class_find_device - device iterator for locating a particular device + * @class: the class we're iterating + * @data: data for the match function + * @match: function to check device + * + * This is similar to the class_for_each_dev() function above, but it + * returns a reference to a device that is 'found' for later use, as + * determined by the @match callback. + * + * The callback should return 0 if the device doesn't match and non-zero + * if it does. If the callback returns non-zero, this function will + * return to the caller and not iterate over any more devices. + + * Note, you will need to drop the reference with put_device() after use. + * + * We hold class->sem in this function, so it can not be + * re-acquired in @match, otherwise it will self-deadlocking. For + * example, calls to add or remove class members would be verboten. + */ +struct device *class_find_device(struct class *class, void *data, + int (*match)(struct device *, void *)) +{ + struct device *dev; + int found = 0; + + if (!class) + return NULL; + + down(&class->sem); + list_for_each_entry(dev, &class->devices, node) { + dev = get_device(dev); + if (dev) { + if (match(dev, data)) { + found = 1; + break; + } else + put_device(dev); + } else + break; + } + up(&class->sem); + + return found ? dev : NULL; +} +EXPORT_SYMBOL_GPL(class_find_device); + +/** + * class_find_child - device iterator for locating a particular class_device + * @class: the class we're iterating + * @data: data for the match function + * @match: function to check class_device + * + * This function returns a reference to a class_device that is 'found' for + * later use, as determined by the @match callback. + * + * The callback should return 0 if the class_device doesn't match and non-zero + * if it does. If the callback returns non-zero, this function will + * return to the caller and not iterate over any more class_devices. + * + * Note, you will need to drop the reference with class_device_put() after use. + * + * We hold class->sem in this function, so it can not be + * re-acquired in @match, otherwise it will self-deadlocking. For + * example, calls to add or remove class members would be verboten. + */ +struct class_device *class_find_child(struct class *class, void *data, + int (*match)(struct class_device *, void *)) +{ + struct class_device *dev; + int found = 0; + + if (!class) + return NULL; + + down(&class->sem); + list_for_each_entry(dev, &class->children, node) { + dev = class_device_get(dev); + if (dev) { + if (match(dev, data)) { + found = 1; + break; + } else + class_device_put(dev); + } else + break; + } + up(&class->sem); + + return found ? dev : NULL; +} +EXPORT_SYMBOL_GPL(class_find_child); int class_interface_register(struct class_interface *class_intf) { diff --git a/include/linux/device.h b/include/linux/device.h index 92ba3a874627..cdaf57bf4d19 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -177,8 +177,7 @@ struct class { struct list_head devices; struct list_head interfaces; struct kset class_dirs; - struct semaphore sem; /* locks both the children and interfaces lists */ - + struct semaphore sem; /* locks children, devices, interfaces */ struct class_attribute * class_attrs; struct class_device_attribute * class_dev_attrs; struct device_attribute * dev_attrs; @@ -196,6 +195,12 @@ struct class { extern int __must_check class_register(struct class *); extern void class_unregister(struct class *); +extern int class_for_each_device(struct class *class, void *data, + int (*fn)(struct device *dev, void *data)); +extern struct device *class_find_device(struct class *class, void *data, + int (*match)(struct device *, void *)); +extern struct class_device *class_find_child(struct class *class, void *data, + int (*match)(struct class_device *, void *)); struct class_attribute { -- cgit v1.2.3-59-g8ed1b From 73cf60232ef16e1f8a64defa97214a1722db1e6c Mon Sep 17 00:00:00 2001 From: Dave Young Date: Tue, 22 Jan 2008 13:56:32 +0800 Subject: ieee1394: use class iteration api Convert to use the class iteration api. Signed-off-by: Dave Young Cc: Stefan Richter Signed-off-by: Greg Kroah-Hartman --- drivers/ieee1394/nodemgr.c | 314 +++++++++++++++++++++++++-------------------- 1 file changed, 176 insertions(+), 138 deletions(-) diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c index 90dc75be3418..511e4321c6b6 100644 --- a/drivers/ieee1394/nodemgr.c +++ b/drivers/ieee1394/nodemgr.c @@ -727,33 +727,31 @@ static int nodemgr_bus_match(struct device * dev, struct device_driver * drv) static DEFINE_MUTEX(nodemgr_serialize_remove_uds); +static int __match_ne(struct device *dev, void *data) +{ + struct unit_directory *ud; + struct node_entry *ne = (struct node_entry *)data; + + ud = container_of(dev, struct unit_directory, unit_dev); + return ud->ne == ne; +} + static void nodemgr_remove_uds(struct node_entry *ne) { struct device *dev; - struct unit_directory *tmp, *ud; - - /* Iteration over nodemgr_ud_class.devices has to be protected by - * nodemgr_ud_class.sem, but device_unregister() will eventually - * take nodemgr_ud_class.sem too. Therefore pick out one ud at a time, - * release the semaphore, and then unregister the ud. Since this code - * may be called from other contexts besides the knodemgrds, protect the - * gap after release of the semaphore by nodemgr_serialize_remove_uds. + struct unit_directory *ud; + + /* Use class_find device to iterate the devices. Since this code + * may be called from other contexts besides the knodemgrds, + * protect it by nodemgr_serialize_remove_uds. */ mutex_lock(&nodemgr_serialize_remove_uds); for (;;) { - ud = NULL; - down(&nodemgr_ud_class.sem); - list_for_each_entry(dev, &nodemgr_ud_class.devices, node) { - tmp = container_of(dev, struct unit_directory, - unit_dev); - if (tmp->ne == ne) { - ud = tmp; - break; - } - } - up(&nodemgr_ud_class.sem); - if (ud == NULL) + dev = class_find_device(&nodemgr_ud_class, ne, __match_ne); + if (!dev) break; + ud = container_of(dev, struct unit_directory, unit_dev); + put_device(dev); device_unregister(&ud->unit_dev); device_unregister(&ud->device); } @@ -882,45 +880,66 @@ fail_alloc: return NULL; } +static int __match_ne_guid(struct device *dev, void *data) +{ + struct node_entry *ne; + u64 *guid = (u64 *)data; + + ne = container_of(dev, struct node_entry, node_dev); + return ne->guid == *guid; +} static struct node_entry *find_entry_by_guid(u64 guid) { struct device *dev; - struct node_entry *ne, *ret_ne = NULL; - - down(&nodemgr_ne_class.sem); - list_for_each_entry(dev, &nodemgr_ne_class.devices, node) { - ne = container_of(dev, struct node_entry, node_dev); + struct node_entry *ne; - if (ne->guid == guid) { - ret_ne = ne; - break; - } - } - up(&nodemgr_ne_class.sem); + dev = class_find_device(&nodemgr_ne_class, &guid, __match_ne_guid); + if (!dev) + return NULL; + ne = container_of(dev, struct node_entry, node_dev); + put_device(dev); - return ret_ne; + return ne; } +struct match_nodeid_param { + struct hpsb_host *host; + nodeid_t nodeid; +}; + +static int __match_ne_nodeid(struct device *dev, void *data) +{ + int found = 0; + struct node_entry *ne; + struct match_nodeid_param *param = (struct match_nodeid_param *)data; + + if (!dev) + goto ret; + ne = container_of(dev, struct node_entry, node_dev); + if (ne->host == param->host && ne->nodeid == param->nodeid) + found = 1; +ret: + return found; +} static struct node_entry *find_entry_by_nodeid(struct hpsb_host *host, nodeid_t nodeid) { struct device *dev; - struct node_entry *ne, *ret_ne = NULL; + struct node_entry *ne; + struct match_nodeid_param param; - down(&nodemgr_ne_class.sem); - list_for_each_entry(dev, &nodemgr_ne_class.devices, node) { - ne = container_of(dev, struct node_entry, node_dev); + param.host = host; + param.nodeid = nodeid; - if (ne->host == host && ne->nodeid == nodeid) { - ret_ne = ne; - break; - } - } - up(&nodemgr_ne_class.sem); + dev = class_find_device(&nodemgr_ne_class, ¶m, __match_ne_nodeid); + if (!dev) + return NULL; + ne = container_of(dev, struct node_entry, node_dev); + put_device(dev); - return ret_ne; + return ne; } @@ -1370,107 +1389,109 @@ static void nodemgr_node_scan(struct host_info *hi, int generation) } } - -static void nodemgr_suspend_ne(struct node_entry *ne) +static int __nodemgr_driver_suspend(struct device *dev, void *data) { - struct device *dev; struct unit_directory *ud; struct device_driver *drv; + struct node_entry *ne = (struct node_entry *)data; int error; - HPSB_DEBUG("Node suspended: ID:BUS[" NODE_BUS_FMT "] GUID[%016Lx]", - NODE_BUS_ARGS(ne->host, ne->nodeid), (unsigned long long)ne->guid); + ud = container_of(dev, struct unit_directory, unit_dev); + if (ud->ne == ne) { + drv = get_driver(ud->device.driver); + if (drv) { + error = 1; /* release if suspend is not implemented */ + if (drv->suspend) { + down(&ud->device.sem); + error = drv->suspend(&ud->device, PMSG_SUSPEND); + up(&ud->device.sem); + } + if (error) + device_release_driver(&ud->device); + put_driver(drv); + } + } - ne->in_limbo = 1; - WARN_ON(device_create_file(&ne->device, &dev_attr_ne_in_limbo)); + return 0; +} - down(&nodemgr_ud_class.sem); - list_for_each_entry(dev, &nodemgr_ud_class.devices, node) { - ud = container_of(dev, struct unit_directory, unit_dev); - if (ud->ne != ne) - continue; +static int __nodemgr_driver_resume(struct device *dev, void *data) +{ + struct unit_directory *ud; + struct device_driver *drv; + struct node_entry *ne = (struct node_entry *)data; + ud = container_of(dev, struct unit_directory, unit_dev); + if (ud->ne == ne) { drv = get_driver(ud->device.driver); - if (!drv) - continue; - - error = 1; /* release if suspend is not implemented */ - if (drv->suspend) { - down(&ud->device.sem); - error = drv->suspend(&ud->device, PMSG_SUSPEND); - up(&ud->device.sem); + if (drv) { + if (drv->resume) { + down(&ud->device.sem); + drv->resume(&ud->device); + up(&ud->device.sem); + } + put_driver(drv); } - if (error) - device_release_driver(&ud->device); - put_driver(drv); } - up(&nodemgr_ud_class.sem); -} + return 0; +} -static void nodemgr_resume_ne(struct node_entry *ne) +static void nodemgr_suspend_ne(struct node_entry *ne) { - struct device *dev; - struct unit_directory *ud; - struct device_driver *drv; + HPSB_DEBUG("Node suspended: ID:BUS[" NODE_BUS_FMT "] GUID[%016Lx]", + NODE_BUS_ARGS(ne->host, ne->nodeid), + (unsigned long long)ne->guid); - ne->in_limbo = 0; - device_remove_file(&ne->device, &dev_attr_ne_in_limbo); + ne->in_limbo = 1; + WARN_ON(device_create_file(&ne->device, &dev_attr_ne_in_limbo)); - down(&nodemgr_ud_class.sem); - list_for_each_entry(dev, &nodemgr_ud_class.devices, node) { - ud = container_of(dev, struct unit_directory, unit_dev); - if (ud->ne != ne) - continue; + class_for_each_device(&nodemgr_ud_class, ne, __nodemgr_driver_suspend); +} - drv = get_driver(ud->device.driver); - if (!drv) - continue; - if (drv->resume) { - down(&ud->device.sem); - drv->resume(&ud->device); - up(&ud->device.sem); - } - put_driver(drv); - } - up(&nodemgr_ud_class.sem); +static void nodemgr_resume_ne(struct node_entry *ne) +{ + ne->in_limbo = 0; + device_remove_file(&ne->device, &dev_attr_ne_in_limbo); + class_for_each_device(&nodemgr_ud_class, ne, __nodemgr_driver_resume); HPSB_DEBUG("Node resumed: ID:BUS[" NODE_BUS_FMT "] GUID[%016Lx]", NODE_BUS_ARGS(ne->host, ne->nodeid), (unsigned long long)ne->guid); } - -static void nodemgr_update_pdrv(struct node_entry *ne) +static int __nodemgr_update_pdrv(struct device *dev, void *data) { - struct device *dev; struct unit_directory *ud; struct device_driver *drv; struct hpsb_protocol_driver *pdrv; + struct node_entry *ne = (struct node_entry *)data; int error; - down(&nodemgr_ud_class.sem); - list_for_each_entry(dev, &nodemgr_ud_class.devices, node) { - ud = container_of(dev, struct unit_directory, unit_dev); - if (ud->ne != ne) - continue; - + ud = container_of(dev, struct unit_directory, unit_dev); + if (ud->ne == ne) { drv = get_driver(ud->device.driver); - if (!drv) - continue; - - error = 0; - pdrv = container_of(drv, struct hpsb_protocol_driver, driver); - if (pdrv->update) { - down(&ud->device.sem); - error = pdrv->update(ud); - up(&ud->device.sem); + if (drv) { + error = 0; + pdrv = container_of(drv, struct hpsb_protocol_driver, + driver); + if (pdrv->update) { + down(&ud->device.sem); + error = pdrv->update(ud); + up(&ud->device.sem); + } + if (error) + device_release_driver(&ud->device); + put_driver(drv); } - if (error) - device_release_driver(&ud->device); - put_driver(drv); } - up(&nodemgr_ud_class.sem); + + return 0; +} + +static void nodemgr_update_pdrv(struct node_entry *ne) +{ + class_for_each_device(&nodemgr_ud_class, ne, __nodemgr_update_pdrv); } @@ -1529,13 +1550,31 @@ static void nodemgr_probe_ne(struct host_info *hi, struct node_entry *ne, int ge put_device(dev); } +struct probe_param { + struct host_info *hi; + int generation; +}; + +static int __nodemgr_node_probe(struct device *dev, void *data) +{ + struct probe_param *param = (struct probe_param *)data; + struct node_entry *ne; + + ne = container_of(dev, struct node_entry, node_dev); + if (!ne->needs_probe) + nodemgr_probe_ne(param->hi, ne, param->generation); + if (ne->needs_probe) + nodemgr_probe_ne(param->hi, ne, param->generation); + return 0; +} static void nodemgr_node_probe(struct host_info *hi, int generation) { struct hpsb_host *host = hi->host; - struct device *dev; - struct node_entry *ne; + struct probe_param param; + param.hi = hi; + param.generation = generation; /* Do some processing of the nodes we've probed. This pulls them * into the sysfs layer if needed, and can result in processing of * unit-directories, or just updating the node and it's @@ -1545,19 +1584,7 @@ static void nodemgr_node_probe(struct host_info *hi, int generation) * while probes are time-consuming. (Well, those probes need some * improvement...) */ - down(&nodemgr_ne_class.sem); - list_for_each_entry(dev, &nodemgr_ne_class.devices, node) { - ne = container_of(dev, struct node_entry, node_dev); - if (!ne->needs_probe) - nodemgr_probe_ne(hi, ne, generation); - } - list_for_each_entry(dev, &nodemgr_ne_class.devices, node) { - ne = container_of(dev, struct node_entry, node_dev); - if (ne->needs_probe) - nodemgr_probe_ne(hi, ne, generation); - } - up(&nodemgr_ne_class.sem); - + class_for_each_device(&nodemgr_ne_class, ¶m, __nodemgr_node_probe); /* If we had a bus reset while we were scanning the bus, it is * possible that we did not probe all nodes. In that case, we @@ -1757,6 +1784,22 @@ exit: return 0; } +struct host_iter_param { + void *data; + int (*cb)(struct hpsb_host *, void *); +}; + +static int __nodemgr_for_each_host(struct device *dev, void *data) +{ + struct hpsb_host *host; + struct host_iter_param *hip = (struct host_iter_param *)data; + int error = 0; + + host = container_of(dev, struct hpsb_host, host_dev); + error = hip->cb(host, hip->data); + + return error; +} /** * nodemgr_for_each_host - call a function for each IEEE 1394 host * @data: an address to supply to the callback @@ -1771,18 +1814,13 @@ exit: */ int nodemgr_for_each_host(void *data, int (*cb)(struct hpsb_host *, void *)) { - struct device *dev; - struct hpsb_host *host; - int error = 0; - - down(&hpsb_host_class.sem); - list_for_each_entry(dev, &hpsb_host_class.devices, node) { - host = container_of(dev, struct hpsb_host, host_dev); + struct host_iter_param hip; + int error; - if ((error = cb(host, data))) - break; - } - up(&hpsb_host_class.sem); + hip.cb = cb; + hip.data = data; + error = class_for_each_device(&hpsb_host_class, &hip, + __nodemgr_for_each_host); return error; } -- cgit v1.2.3-59-g8ed1b From 443cad920a1c6894da3de917ce02a194cc6d80ea Mon Sep 17 00:00:00 2001 From: Dave Young Date: Tue, 22 Jan 2008 13:58:22 +0800 Subject: power supply : use class iteration api Convert to use the class iteration api. Signed-off-by: Dave Young Cc: Anton Vorontsov Cc: David Woodhouse Signed-off-by: Greg Kroah-Hartman --- drivers/power/apm_power.c | 116 ++++++++++++++++++++++---------------- drivers/power/power_supply_core.c | 74 ++++++++++++------------ 2 files changed, 107 insertions(+), 83 deletions(-) diff --git a/drivers/power/apm_power.c b/drivers/power/apm_power.c index bbf3ee10da04..7e29b90a4f63 100644 --- a/drivers/power/apm_power.c +++ b/drivers/power/apm_power.c @@ -13,6 +13,7 @@ #include #include +static DEFINE_MUTEX(apm_mutex); #define PSY_PROP(psy, prop, val) psy->get_property(psy, \ POWER_SUPPLY_PROP_##prop, val) @@ -23,67 +24,86 @@ static struct power_supply *main_battery; -static void find_main_battery(void) -{ - struct device *dev; - struct power_supply *bat = NULL; - struct power_supply *max_charge_bat = NULL; - struct power_supply *max_energy_bat = NULL; +struct find_bat_param { + struct power_supply *main; + struct power_supply *bat; + struct power_supply *max_charge_bat; + struct power_supply *max_energy_bat; union power_supply_propval full; - int max_charge = 0; - int max_energy = 0; + int max_charge; + int max_energy; +}; - main_battery = NULL; +static int __find_main_battery(struct device *dev, void *data) +{ + struct find_bat_param *bp = (struct find_bat_param *)data; - list_for_each_entry(dev, &power_supply_class->devices, node) { - bat = dev_get_drvdata(dev); + bp->bat = dev_get_drvdata(dev); - if (bat->use_for_apm) { - /* nice, we explicitly asked to report this battery. */ - main_battery = bat; - return; - } + if (bp->bat->use_for_apm) { + /* nice, we explicitly asked to report this battery. */ + bp->main = bp->bat; + return 1; + } - if (!PSY_PROP(bat, CHARGE_FULL_DESIGN, &full) || - !PSY_PROP(bat, CHARGE_FULL, &full)) { - if (full.intval > max_charge) { - max_charge_bat = bat; - max_charge = full.intval; - } - } else if (!PSY_PROP(bat, ENERGY_FULL_DESIGN, &full) || - !PSY_PROP(bat, ENERGY_FULL, &full)) { - if (full.intval > max_energy) { - max_energy_bat = bat; - max_energy = full.intval; - } + if (!PSY_PROP(bp->bat, CHARGE_FULL_DESIGN, &bp->full) || + !PSY_PROP(bp->bat, CHARGE_FULL, &bp->full)) { + if (bp->full.intval > bp->max_charge) { + bp->max_charge_bat = bp->bat; + bp->max_charge = bp->full.intval; + } + } else if (!PSY_PROP(bp->bat, ENERGY_FULL_DESIGN, &bp->full) || + !PSY_PROP(bp->bat, ENERGY_FULL, &bp->full)) { + if (bp->full.intval > bp->max_energy) { + bp->max_energy_bat = bp->bat; + bp->max_energy = bp->full.intval; } } + return 0; +} + +static void find_main_battery(void) +{ + struct find_bat_param bp; + int error; + + memset(&bp, 0, sizeof(struct find_bat_param)); + main_battery = NULL; + bp.main = main_battery; + + error = class_for_each_device(power_supply_class, &bp, + __find_main_battery); + if (error) { + main_battery = bp.main; + return; + } - if ((max_energy_bat && max_charge_bat) && - (max_energy_bat != max_charge_bat)) { + if ((bp.max_energy_bat && bp.max_charge_bat) && + (bp.max_energy_bat != bp.max_charge_bat)) { /* try guess battery with more capacity */ - if (!PSY_PROP(max_charge_bat, VOLTAGE_MAX_DESIGN, &full)) { - if (max_energy > max_charge * full.intval) - main_battery = max_energy_bat; + if (!PSY_PROP(bp.max_charge_bat, VOLTAGE_MAX_DESIGN, + &bp.full)) { + if (bp.max_energy > bp.max_charge * bp.full.intval) + main_battery = bp.max_energy_bat; else - main_battery = max_charge_bat; - } else if (!PSY_PROP(max_energy_bat, VOLTAGE_MAX_DESIGN, - &full)) { - if (max_charge > max_energy / full.intval) - main_battery = max_charge_bat; + main_battery = bp.max_charge_bat; + } else if (!PSY_PROP(bp.max_energy_bat, VOLTAGE_MAX_DESIGN, + &bp.full)) { + if (bp.max_charge > bp.max_energy / bp.full.intval) + main_battery = bp.max_charge_bat; else - main_battery = max_energy_bat; + main_battery = bp.max_energy_bat; } else { /* give up, choice any */ - main_battery = max_energy_bat; + main_battery = bp.max_energy_bat; } - } else if (max_charge_bat) { - main_battery = max_charge_bat; - } else if (max_energy_bat) { - main_battery = max_energy_bat; + } else if (bp.max_charge_bat) { + main_battery = bp.max_charge_bat; + } else if (bp.max_energy_bat) { + main_battery = bp.max_energy_bat; } else { /* give up, try the last if any */ - main_battery = bat; + main_battery = bp.bat; } } @@ -207,10 +227,10 @@ static void apm_battery_apm_get_power_status(struct apm_power_info *info) union power_supply_propval status; union power_supply_propval capacity, time_to_full, time_to_empty; - down(&power_supply_class->sem); + mutex_lock(&apm_mutex); find_main_battery(); if (!main_battery) { - up(&power_supply_class->sem); + mutex_unlock(&apm_mutex); return; } @@ -278,7 +298,7 @@ static void apm_battery_apm_get_power_status(struct apm_power_info *info) } } - up(&power_supply_class->sem); + mutex_unlock(&apm_mutex); } static int __init apm_battery_init(void) diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c index a63b75cf75e2..03d6a38464ef 100644 --- a/drivers/power/power_supply_core.c +++ b/drivers/power/power_supply_core.c @@ -20,28 +20,29 @@ struct class *power_supply_class; +static int __power_supply_changed_work(struct device *dev, void *data) +{ + struct power_supply *psy = (struct power_supply *)data; + struct power_supply *pst = dev_get_drvdata(dev); + int i; + + for (i = 0; i < psy->num_supplicants; i++) + if (!strcmp(psy->supplied_to[i], pst->name)) { + if (pst->external_power_changed) + pst->external_power_changed(pst); + } + return 0; +} + static void power_supply_changed_work(struct work_struct *work) { struct power_supply *psy = container_of(work, struct power_supply, changed_work); - int i; dev_dbg(psy->dev, "%s\n", __FUNCTION__); - for (i = 0; i < psy->num_supplicants; i++) { - struct device *dev; - - down(&power_supply_class->sem); - list_for_each_entry(dev, &power_supply_class->devices, node) { - struct power_supply *pst = dev_get_drvdata(dev); - - if (!strcmp(psy->supplied_to[i], pst->name)) { - if (pst->external_power_changed) - pst->external_power_changed(pst); - } - } - up(&power_supply_class->sem); - } + class_for_each_device(power_supply_class, psy, + __power_supply_changed_work); power_supply_update_leds(psy); @@ -55,32 +56,35 @@ void power_supply_changed(struct power_supply *psy) schedule_work(&psy->changed_work); } -int power_supply_am_i_supplied(struct power_supply *psy) +static int __power_supply_am_i_supplied(struct device *dev, void *data) { union power_supply_propval ret = {0,}; - struct device *dev; - - down(&power_supply_class->sem); - list_for_each_entry(dev, &power_supply_class->devices, node) { - struct power_supply *epsy = dev_get_drvdata(dev); - int i; - - for (i = 0; i < epsy->num_supplicants; i++) { - if (!strcmp(epsy->supplied_to[i], psy->name)) { - if (epsy->get_property(epsy, - POWER_SUPPLY_PROP_ONLINE, &ret)) - continue; - if (ret.intval) - goto out; - } + struct power_supply *psy = (struct power_supply *)data; + struct power_supply *epsy = dev_get_drvdata(dev); + int i; + + for (i = 0; i < epsy->num_supplicants; i++) { + if (!strcmp(epsy->supplied_to[i], psy->name)) { + if (epsy->get_property(epsy, + POWER_SUPPLY_PROP_ONLINE, &ret)) + continue; + if (ret.intval) + return ret.intval; } } -out: - up(&power_supply_class->sem); + return 0; +} + +int power_supply_am_i_supplied(struct power_supply *psy) +{ + int error; + + error = class_for_each_device(power_supply_class, psy, + __power_supply_am_i_supplied); - dev_dbg(psy->dev, "%s %d\n", __FUNCTION__, ret.intval); + dev_dbg(psy->dev, "%s %d\n", __FUNCTION__, error); - return ret.intval; + return error; } int power_supply_register(struct device *parent, struct power_supply *psy) -- cgit v1.2.3-59-g8ed1b From 71da890509fec13d54329485bf5e4ac16b992bb6 Mon Sep 17 00:00:00 2001 From: Dave Young Date: Tue, 22 Jan 2008 14:00:34 +0800 Subject: rtc: use class iteration api Convert to use the class iteration api. Signed-off-by: Dave Young Cc: Alessandro Zummo Signed-off-by: Greg Kroah-Hartman --- drivers/rtc/interface.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index f1e00ff54ce8..7e3ad4f3b343 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -251,20 +251,23 @@ void rtc_update_irq(struct rtc_device *rtc, } EXPORT_SYMBOL_GPL(rtc_update_irq); +static int __rtc_match(struct device *dev, void *data) +{ + char *name = (char *)data; + + if (strncmp(dev->bus_id, name, BUS_ID_SIZE) == 0) + return 1; + return 0; +} + struct rtc_device *rtc_class_open(char *name) { struct device *dev; struct rtc_device *rtc = NULL; - down(&rtc_class->sem); - list_for_each_entry(dev, &rtc_class->devices, node) { - if (strncmp(dev->bus_id, name, BUS_ID_SIZE) == 0) { - dev = get_device(dev); - if (dev) - rtc = to_rtc_device(dev); - break; - } - } + dev = class_find_device(rtc_class, name, __rtc_match); + if (dev) + rtc = to_rtc_device(dev); if (rtc) { if (!try_module_get(rtc->owner)) { @@ -272,7 +275,6 @@ struct rtc_device *rtc_class_open(char *name) rtc = NULL; } } - up(&rtc_class->sem); return rtc; } -- cgit v1.2.3-59-g8ed1b From 9c7701088a61cc0cf8a6e1c68d1e74e3cc2ee0b7 Mon Sep 17 00:00:00 2001 From: Dave Young Date: Tue, 22 Jan 2008 14:01:34 +0800 Subject: scsi: use class iteration api Convert to use the class iteration api. Signed-off-by: Dave Young Cc: James Bottomley Signed-off-by: Greg Kroah-Hartman --- drivers/scsi/hosts.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index 24271a871b8c..6325115e5b3d 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -429,6 +429,15 @@ void scsi_unregister(struct Scsi_Host *shost) } EXPORT_SYMBOL(scsi_unregister); +static int __scsi_host_match(struct class_device *cdev, void *data) +{ + struct Scsi_Host *p; + unsigned short *hostnum = (unsigned short *)data; + + p = class_to_shost(cdev); + return p->host_no == *hostnum; +} + /** * scsi_host_lookup - get a reference to a Scsi_Host by host no * @@ -439,19 +448,12 @@ EXPORT_SYMBOL(scsi_unregister); **/ struct Scsi_Host *scsi_host_lookup(unsigned short hostnum) { - struct class *class = &shost_class; struct class_device *cdev; - struct Scsi_Host *shost = ERR_PTR(-ENXIO), *p; + struct Scsi_Host *shost = ERR_PTR(-ENXIO); - down(&class->sem); - list_for_each_entry(cdev, &class->children, node) { - p = class_to_shost(cdev); - if (p->host_no == hostnum) { - shost = scsi_host_get(p); - break; - } - } - up(&class->sem); + cdev = class_find_child(&shost_class, &hostnum, __scsi_host_match); + if (cdev) + shost = scsi_host_get(class_to_shost(cdev)); return shost; } -- cgit v1.2.3-59-g8ed1b From 5ed2c832ed256b18d90c2462369c62fd79312e6c Mon Sep 17 00:00:00 2001 From: Dave Young Date: Tue, 22 Jan 2008 15:14:18 +0800 Subject: spi: use class iteration api Convert to use the class iteration api. Signed-off-by: Dave Young Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/spi/spi.c | 26 +++++++++++++++----------- 1 file changed, 15 insertions(+), 11 deletions(-) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 93e9de46977a..682a6a48fec3 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -485,6 +485,15 @@ void spi_unregister_master(struct spi_master *master) } EXPORT_SYMBOL_GPL(spi_unregister_master); +static int __spi_master_match(struct device *dev, void *data) +{ + struct spi_master *m; + u16 *bus_num = data; + + m = container_of(dev, struct spi_master, dev); + return m->bus_num == *bus_num; +} + /** * spi_busnum_to_master - look up master associated with bus_num * @bus_num: the master's bus number @@ -499,17 +508,12 @@ struct spi_master *spi_busnum_to_master(u16 bus_num) { struct device *dev; struct spi_master *master = NULL; - struct spi_master *m; - - down(&spi_master_class.sem); - list_for_each_entry(dev, &spi_master_class.children, node) { - m = container_of(dev, struct spi_master, dev); - if (m->bus_num == bus_num) { - master = spi_master_get(m); - break; - } - } - up(&spi_master_class.sem); + + dev = class_find_device(&spi_master_class, &bus_num, + __spi_master_match); + if (dev) + master = container_of(dev, struct spi_master, dev); + /* reference got in class_find_device */ return master; } EXPORT_SYMBOL_GPL(spi_busnum_to_master); -- cgit v1.2.3-59-g8ed1b From d462943afee8bff610258a82dba666e8ab72c9c8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 24 Jan 2008 21:04:46 -0800 Subject: Driver core: fix coding style issues in device.h Finally clean up the odd spaces and other mess in device.h Signed-off-by: Greg Kroah-Hartman --- include/linux/device.h | 283 +++++++++++++++++++++++++------------------------ 1 file changed, 145 insertions(+), 138 deletions(-) diff --git a/include/linux/device.h b/include/linux/device.h index cdaf57bf4d19..1880208964d6 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -25,7 +25,8 @@ #include #define DEVICE_NAME_SIZE 50 -#define DEVICE_NAME_HALF __stringify(20) /* Less than half to accommodate slop */ +/* DEVICE_NAME_HALF is really less than half to accommodate slop */ +#define DEVICE_NAME_HALF __stringify(20) #define DEVICE_ID_SIZE 32 #define BUS_ID_SIZE KOBJ_NAME_LEN @@ -40,52 +41,53 @@ struct bus_type_private; struct bus_attribute { struct attribute attr; - ssize_t (*show)(struct bus_type *, char * buf); - ssize_t (*store)(struct bus_type *, const char * buf, size_t count); + ssize_t (*show)(struct bus_type *bus, char *buf); + ssize_t (*store)(struct bus_type *bus, const char *buf, size_t count); }; -#define BUS_ATTR(_name,_mode,_show,_store) \ -struct bus_attribute bus_attr_##_name = __ATTR(_name,_mode,_show,_store) +#define BUS_ATTR(_name, _mode, _show, _store) \ +struct bus_attribute bus_attr_##_name = __ATTR(_name, _mode, _show, _store) extern int __must_check bus_create_file(struct bus_type *, struct bus_attribute *); extern void bus_remove_file(struct bus_type *, struct bus_attribute *); struct bus_type { - const char * name; - struct bus_attribute * bus_attrs; - struct device_attribute * dev_attrs; - struct driver_attribute * drv_attrs; - - int (*match)(struct device * dev, struct device_driver * drv); - int (*uevent)(struct device *dev, struct kobj_uevent_env *env); - int (*probe)(struct device * dev); - int (*remove)(struct device * dev); - void (*shutdown)(struct device * dev); - - int (*suspend)(struct device * dev, pm_message_t state); - int (*suspend_late)(struct device * dev, pm_message_t state); - int (*resume_early)(struct device * dev); - int (*resume)(struct device * dev); + const char *name; + struct bus_attribute *bus_attrs; + struct device_attribute *dev_attrs; + struct driver_attribute *drv_attrs; + + int (*match)(struct device *dev, struct device_driver *drv); + int (*uevent)(struct device *dev, struct kobj_uevent_env *env); + int (*probe)(struct device *dev); + int (*remove)(struct device *dev); + void (*shutdown)(struct device *dev); + + int (*suspend)(struct device *dev, pm_message_t state); + int (*suspend_late)(struct device *dev, pm_message_t state); + int (*resume_early)(struct device *dev); + int (*resume)(struct device *dev); struct bus_type_private *p; }; -extern int __must_check bus_register(struct bus_type * bus); -extern void bus_unregister(struct bus_type * bus); +extern int __must_check bus_register(struct bus_type *bus); +extern void bus_unregister(struct bus_type *bus); -extern int __must_check bus_rescan_devices(struct bus_type * bus); +extern int __must_check bus_rescan_devices(struct bus_type *bus); /* iterator helpers for buses */ -int bus_for_each_dev(struct bus_type * bus, struct device * start, void * data, - int (*fn)(struct device *, void *)); -struct device * bus_find_device(struct bus_type *bus, struct device *start, - void *data, int (*match)(struct device *, void *)); +int bus_for_each_dev(struct bus_type *bus, struct device *start, void *data, + int (*fn)(struct device *dev, void *data)); +struct device *bus_find_device(struct bus_type *bus, struct device *start, + void *data, + int (*match)(struct device *dev, void *data)); int __must_check bus_for_each_drv(struct bus_type *bus, - struct device_driver *start, void *data, - int (*fn)(struct device_driver *, void *)); + struct device_driver *start, void *data, + int (*fn)(struct device_driver *, void *)); /* * Bus notifiers: Get notified of addition/removal of devices @@ -120,57 +122,63 @@ struct device_driver { struct module *owner; const char *mod_name; /* used for built-in modules */ - int (*probe) (struct device * dev); - int (*remove) (struct device * dev); - void (*shutdown) (struct device * dev); - int (*suspend) (struct device * dev, pm_message_t state); - int (*resume) (struct device * dev); + int (*probe) (struct device *dev); + int (*remove) (struct device *dev); + void (*shutdown) (struct device *dev); + int (*suspend) (struct device *dev, pm_message_t state); + int (*resume) (struct device *dev); struct attribute_group **groups; struct driver_private *p; }; -extern int __must_check driver_register(struct device_driver * drv); -extern void driver_unregister(struct device_driver * drv); +extern int __must_check driver_register(struct device_driver *drv); +extern void driver_unregister(struct device_driver *drv); -extern struct device_driver * get_driver(struct device_driver * drv); -extern void put_driver(struct device_driver * drv); -extern struct device_driver *driver_find(const char *name, struct bus_type *bus); +extern struct device_driver *get_driver(struct device_driver *drv); +extern void put_driver(struct device_driver *drv); +extern struct device_driver *driver_find(const char *name, + struct bus_type *bus); extern int driver_probe_done(void); /* sysfs interface for exporting driver attributes */ struct driver_attribute { - struct attribute attr; - ssize_t (*show)(struct device_driver *, char * buf); - ssize_t (*store)(struct device_driver *, const char * buf, size_t count); + struct attribute attr; + ssize_t (*show)(struct device_driver *driver, char *buf); + ssize_t (*store)(struct device_driver *driver, const char *buf, + size_t count); }; -#define DRIVER_ATTR(_name,_mode,_show,_store) \ -struct driver_attribute driver_attr_##_name = __ATTR(_name,_mode,_show,_store) +#define DRIVER_ATTR(_name, _mode, _show, _store) \ +struct driver_attribute driver_attr_##_name = \ + __ATTR(_name, _mode, _show, _store) -extern int __must_check driver_create_file(struct device_driver *, - struct driver_attribute *); -extern void driver_remove_file(struct device_driver *, struct driver_attribute *); +extern int __must_check driver_create_file(struct device_driver *driver, + struct driver_attribute *attr); +extern void driver_remove_file(struct device_driver *driver, + struct driver_attribute *attr); extern int __must_check driver_add_kobj(struct device_driver *drv, struct kobject *kobj, const char *fmt, ...); -extern int __must_check driver_for_each_device(struct device_driver * drv, - struct device *start, void *data, - int (*fn)(struct device *, void *)); -struct device * driver_find_device(struct device_driver *drv, - struct device *start, void *data, - int (*match)(struct device *, void *)); +extern int __must_check driver_for_each_device(struct device_driver *drv, + struct device *start, + void *data, + int (*fn)(struct device *dev, + void *)); +struct device *driver_find_device(struct device_driver *drv, + struct device *start, void *data, + int (*match)(struct device *dev, void *data)); /* * device classes */ struct class { - const char * name; - struct module * owner; + const char *name; + struct module *owner; struct kset subsys; struct list_head children; @@ -178,23 +186,23 @@ struct class { struct list_head interfaces; struct kset class_dirs; struct semaphore sem; /* locks children, devices, interfaces */ - struct class_attribute * class_attrs; - struct class_device_attribute * class_dev_attrs; - struct device_attribute * dev_attrs; + struct class_attribute *class_attrs; + struct class_device_attribute *class_dev_attrs; + struct device_attribute *dev_attrs; - int (*uevent)(struct class_device *dev, struct kobj_uevent_env *env); - int (*dev_uevent)(struct device *dev, struct kobj_uevent_env *env); + int (*uevent)(struct class_device *dev, struct kobj_uevent_env *env); + int (*dev_uevent)(struct device *dev, struct kobj_uevent_env *env); - void (*release)(struct class_device *dev); - void (*class_release)(struct class *class); - void (*dev_release)(struct device *dev); + void (*release)(struct class_device *dev); + void (*class_release)(struct class *class); + void (*dev_release)(struct device *dev); - int (*suspend)(struct device *, pm_message_t state); - int (*resume)(struct device *); + int (*suspend)(struct device *dev, pm_message_t state); + int (*resume)(struct device *dev); }; -extern int __must_check class_register(struct class *); -extern void class_unregister(struct class *); +extern int __must_check class_register(struct class *class); +extern void class_unregister(struct class *class); extern int class_for_each_device(struct class *class, void *data, int (*fn)(struct device *dev, void *data)); extern struct device *class_find_device(struct class *class, void *data, @@ -204,27 +212,28 @@ extern struct class_device *class_find_child(struct class *class, void *data, struct class_attribute { - struct attribute attr; - ssize_t (*show)(struct class *, char * buf); - ssize_t (*store)(struct class *, const char * buf, size_t count); + struct attribute attr; + ssize_t (*show)(struct class *class, char *buf); + ssize_t (*store)(struct class *class, const char *buf, size_t count); }; -#define CLASS_ATTR(_name,_mode,_show,_store) \ -struct class_attribute class_attr_##_name = __ATTR(_name,_mode,_show,_store) +#define CLASS_ATTR(_name, _mode, _show, _store) \ +struct class_attribute class_attr_##_name = __ATTR(_name, _mode, _show, _store) -extern int __must_check class_create_file(struct class *, - const struct class_attribute *); -extern void class_remove_file(struct class *, const struct class_attribute *); +extern int __must_check class_create_file(struct class *class, + const struct class_attribute *attr); +extern void class_remove_file(struct class *class, + const struct class_attribute *attr); struct class_device_attribute { - struct attribute attr; - ssize_t (*show)(struct class_device *, char * buf); - ssize_t (*store)(struct class_device *, const char * buf, size_t count); + struct attribute attr; + ssize_t (*show)(struct class_device *, char *buf); + ssize_t (*store)(struct class_device *, const char *buf, size_t count); }; -#define CLASS_DEVICE_ATTR(_name,_mode,_show,_store) \ +#define CLASS_DEVICE_ATTR(_name, _mode, _show, _store) \ struct class_device_attribute class_device_attr_##_name = \ - __ATTR(_name,_mode,_show,_store) + __ATTR(_name, _mode, _show, _store) extern int __must_check class_device_create_file(struct class_device *, const struct class_device_attribute *); @@ -257,26 +266,24 @@ struct class_device { struct list_head node; struct kobject kobj; - struct class * class; /* required */ - dev_t devt; /* dev_t, creates the sysfs "dev" */ - struct device * dev; /* not necessary, but nice to have */ - void * class_data; /* class-specific data */ - struct class_device *parent; /* parent of this child device, if there is one */ - struct attribute_group ** groups; /* optional groups */ - - void (*release)(struct class_device *dev); - int (*uevent)(struct class_device *dev, struct kobj_uevent_env *env); - char class_id[BUS_ID_SIZE]; /* unique to this class */ + struct class *class; + dev_t devt; + struct device *dev; + void *class_data; + struct class_device *parent; + struct attribute_group **groups; + + void (*release)(struct class_device *dev); + int (*uevent)(struct class_device *dev, struct kobj_uevent_env *env); + char class_id[BUS_ID_SIZE]; }; -static inline void * -class_get_devdata (struct class_device *dev) +static inline void *class_get_devdata(struct class_device *dev) { return dev->class_data; } -static inline void -class_set_devdata (struct class_device *dev, void *data) +static inline void class_set_devdata(struct class_device *dev, void *data) { dev->class_data = data; } @@ -288,10 +295,10 @@ extern void class_device_initialize(struct class_device *); extern int __must_check class_device_add(struct class_device *); extern void class_device_del(struct class_device *); -extern struct class_device * class_device_get(struct class_device *); +extern struct class_device *class_device_get(struct class_device *); extern void class_device_put(struct class_device *); -extern void class_device_remove_file(struct class_device *, +extern void class_device_remove_file(struct class_device *, const struct class_device_attribute *); extern int __must_check class_device_create_bin_file(struct class_device *, struct bin_attribute *); @@ -318,7 +325,7 @@ extern struct class_device *class_device_create(struct class *cls, dev_t devt, struct device *device, const char *fmt, ...) - __attribute__((format(printf,5,6))); + __attribute__((format(printf, 5, 6))); extern void class_device_destroy(struct class *cls, dev_t devt); /* @@ -335,8 +342,8 @@ struct device_type { struct attribute_group **groups; int (*uevent)(struct device *dev, struct kobj_uevent_env *env); void (*release)(struct device *dev); - int (*suspend)(struct device * dev, pm_message_t state); - int (*resume)(struct device * dev); + int (*suspend)(struct device *dev, pm_message_t state); + int (*resume)(struct device *dev); }; /* interface for exporting device attributes */ @@ -348,18 +355,19 @@ struct device_attribute { const char *buf, size_t count); }; -#define DEVICE_ATTR(_name,_mode,_show,_store) \ -struct device_attribute dev_attr_##_name = __ATTR(_name,_mode,_show,_store) +#define DEVICE_ATTR(_name, _mode, _show, _store) \ +struct device_attribute dev_attr_##_name = __ATTR(_name, _mode, _show, _store) extern int __must_check device_create_file(struct device *device, - struct device_attribute * entry); -extern void device_remove_file(struct device * dev, struct device_attribute * attr); + struct device_attribute *entry); +extern void device_remove_file(struct device *dev, + struct device_attribute *attr); extern int __must_check device_create_bin_file(struct device *dev, struct bin_attribute *attr); extern void device_remove_bin_file(struct device *dev, struct bin_attribute *attr); extern int device_schedule_callback_owner(struct device *dev, - void (*func)(struct device *), struct module *owner); + void (*func)(struct device *dev), struct module *owner); /* This is a macro to avoid include problems with THIS_MODULE */ #define device_schedule_callback(dev, func) \ @@ -370,21 +378,21 @@ typedef void (*dr_release_t)(struct device *dev, void *res); typedef int (*dr_match_t)(struct device *dev, void *res, void *match_data); #ifdef CONFIG_DEBUG_DEVRES -extern void * __devres_alloc(dr_release_t release, size_t size, gfp_t gfp, +extern void *__devres_alloc(dr_release_t release, size_t size, gfp_t gfp, const char *name); #define devres_alloc(release, size, gfp) \ __devres_alloc(release, size, gfp, #release) #else -extern void * devres_alloc(dr_release_t release, size_t size, gfp_t gfp); +extern void *devres_alloc(dr_release_t release, size_t size, gfp_t gfp); #endif extern void devres_free(void *res); extern void devres_add(struct device *dev, void *res); -extern void * devres_find(struct device *dev, dr_release_t release, - dr_match_t match, void *match_data); -extern void * devres_get(struct device *dev, void *new_res, +extern void *devres_find(struct device *dev, dr_release_t release, dr_match_t match, void *match_data); -extern void * devres_remove(struct device *dev, dr_release_t release, - dr_match_t match, void *match_data); +extern void *devres_get(struct device *dev, void *new_res, + dr_match_t match, void *match_data); +extern void *devres_remove(struct device *dev, dr_release_t release, + dr_match_t match, void *match_data); extern int devres_destroy(struct device *dev, dr_release_t release, dr_match_t match, void *match_data); @@ -401,7 +409,7 @@ extern void devm_kfree(struct device *dev, void *p); struct device { struct klist klist_children; - struct klist_node knode_parent; /* node in sibling list */ + struct klist_node knode_parent; /* node in sibling list */ struct klist_node knode_driver; struct klist_node knode_bus; struct device *parent; @@ -416,7 +424,7 @@ struct device { * its driver. */ - struct bus_type * bus; /* type of bus device is on */ + struct bus_type *bus; /* type of bus device is on */ struct device_driver *driver; /* which driver has allocated this device */ void *driver_data; /* data private to the driver */ @@ -447,10 +455,10 @@ struct device { /* class_device migration path */ struct list_head node; struct class *class; - dev_t devt; /* dev_t, creates the sysfs "dev" */ + dev_t devt; /* dev_t, creates the sysfs "dev" */ struct attribute_group **groups; /* optional groups */ - void (*release)(struct device * dev); + void (*release)(struct device *dev); }; #ifdef CONFIG_NUMA @@ -472,14 +480,12 @@ static inline void set_dev_node(struct device *dev, int node) } #endif -static inline void * -dev_get_drvdata (struct device *dev) +static inline void *dev_get_drvdata(struct device *dev) { return dev->driver_data; } -static inline void -dev_set_drvdata (struct device *dev, void *data) +static inline void dev_set_drvdata(struct device *dev, void *data) { dev->driver_data = data; } @@ -494,15 +500,15 @@ void driver_init(void); /* * High level routines for use by the bus drivers */ -extern int __must_check device_register(struct device * dev); -extern void device_unregister(struct device * dev); -extern void device_initialize(struct device * dev); -extern int __must_check device_add(struct device * dev); -extern void device_del(struct device * dev); -extern int device_for_each_child(struct device *, void *, - int (*fn)(struct device *, void *)); -extern struct device *device_find_child(struct device *, void *data, - int (*match)(struct device *, void *)); +extern int __must_check device_register(struct device *dev); +extern void device_unregister(struct device *dev); +extern void device_initialize(struct device *dev); +extern int __must_check device_add(struct device *dev); +extern void device_del(struct device *dev); +extern int device_for_each_child(struct device *dev, void *data, + int (*fn)(struct device *dev, void *data)); +extern struct device *device_find_child(struct device *dev, void *data, + int (*match)(struct device *dev, void *data)); extern int device_rename(struct device *dev, char *new_name); extern int device_move(struct device *dev, struct device *new_parent); @@ -511,8 +517,8 @@ extern int device_move(struct device *dev, struct device *new_parent); * for information on use. */ extern int __must_check device_bind_driver(struct device *dev); -extern void device_release_driver(struct device * dev); -extern int __must_check device_attach(struct device * dev); +extern void device_release_driver(struct device *dev); +extern int __must_check device_attach(struct device *dev); extern int __must_check driver_attach(struct device_driver *drv); extern int __must_check device_reprobe(struct device *dev); @@ -521,7 +527,7 @@ extern int __must_check device_reprobe(struct device *dev); */ extern struct device *device_create(struct class *cls, struct device *parent, dev_t devt, const char *fmt, ...) - __attribute__((format(printf,4,5))); + __attribute__((format(printf, 4, 5))); extern void device_destroy(struct class *cls, dev_t devt); #ifdef CONFIG_PM_SLEEP extern void destroy_suspended_device(struct class *cls, dev_t devt); @@ -538,17 +544,17 @@ static inline void destroy_suspended_device(struct class *cls, dev_t devt) * know about. */ /* Notify platform of device discovery */ -extern int (*platform_notify)(struct device * dev); +extern int (*platform_notify)(struct device *dev); -extern int (*platform_notify_remove)(struct device * dev); +extern int (*platform_notify_remove)(struct device *dev); /** * get_device - atomically increment the reference count for the device. * */ -extern struct device * get_device(struct device * dev); -extern void put_device(struct device * dev); +extern struct device *get_device(struct device *dev); +extern void put_device(struct device *dev); /* drivers/base/power/shutdown.c */ @@ -560,7 +566,8 @@ extern void sysdev_shutdown(void); /* debugging and troubleshooting/diagnostic helpers. */ extern const char *dev_driver_string(struct device *dev); #define dev_printk(level, dev, format, arg...) \ - printk(level "%s %s: " format , dev_driver_string(dev) , (dev)->bus_id , ## arg) + printk(level "%s %s: " format , dev_driver_string(dev) , \ + (dev)->bus_id , ## arg) #define dev_emerg(dev, format, arg...) \ dev_printk(KERN_EMERG , dev , format , ## arg) @@ -582,7 +589,7 @@ extern const char *dev_driver_string(struct device *dev); dev_printk(KERN_DEBUG , dev , format , ## arg) #else static inline int __attribute__ ((format (printf, 2, 3))) -dev_dbg(struct device * dev, const char * fmt, ...) +dev_dbg(struct device *dev, const char *fmt, ...) { return 0; } @@ -592,7 +599,7 @@ dev_dbg(struct device * dev, const char * fmt, ...) #define dev_vdbg dev_dbg #else static inline int __attribute__ ((format (printf, 2, 3))) -dev_vdbg(struct device * dev, const char * fmt, ...) +dev_vdbg(struct device *dev, const char *fmt, ...) { return 0; } -- cgit v1.2.3-59-g8ed1b From 79a6ee42fd81be9abc6bdab08f932875924b26a5 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 24 Jan 2008 21:27:06 -0800 Subject: Kobject: fix coding style issues in kobject.h Finally clean up the odd spaces and other mess in kobject.h Signed-off-by: Greg Kroah-Hartman --- include/linux/kobject.h | 67 +++++++++++++++++++++++++------------------------ 1 file changed, 34 insertions(+), 33 deletions(-) diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 4adbe1d83081..caa3f411f15d 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -3,15 +3,14 @@ * * Copyright (c) 2002-2003 Patrick Mochel * Copyright (c) 2002-2003 Open Source Development Labs - * Copyright (c) 2006-2007 Greg Kroah-Hartman - * Copyright (c) 2006-2007 Novell Inc. + * Copyright (c) 2006-2008 Greg Kroah-Hartman + * Copyright (c) 2006-2008 Novell Inc. * * This file is released under the GPLv2. * - * * Please read Documentation/kobject.txt before using the kobject * interface, ESPECIALLY the parts about reference counts and object - * destructors. + * destructors. */ #ifndef _KOBJECT_H_ @@ -64,20 +63,20 @@ struct kobject { const char *name; struct kref kref; struct list_head entry; - struct kobject * parent; - struct kset * kset; - struct kobj_type * ktype; - struct sysfs_dirent * sd; + struct kobject *parent; + struct kset *kset; + struct kobj_type *ktype; + struct sysfs_dirent *sd; unsigned int state_initialized:1; unsigned int state_in_sysfs:1; unsigned int state_add_uevent_sent:1; unsigned int state_remove_uevent_sent:1; }; -extern int kobject_set_name(struct kobject *, const char *, ...) - __attribute__((format(printf,2,3))); +extern int kobject_set_name(struct kobject *kobj, const char *name, ...) + __attribute__((format(printf, 2, 3))); -static inline const char * kobject_name(const struct kobject * kobj) +static inline const char *kobject_name(const struct kobject *kobj) { return kobj->name; } @@ -91,7 +90,7 @@ extern int __must_check kobject_init_and_add(struct kobject *kobj, struct kobject *parent, const char *fmt, ...); -extern void kobject_del(struct kobject *); +extern void kobject_del(struct kobject *kobj); extern struct kobject * __must_check kobject_create(void); extern struct kobject * __must_check kobject_create_and_add(const char *name, @@ -100,15 +99,15 @@ extern struct kobject * __must_check kobject_create_and_add(const char *name, extern int __must_check kobject_rename(struct kobject *, const char *new_name); extern int __must_check kobject_move(struct kobject *, struct kobject *); -extern struct kobject * kobject_get(struct kobject *); -extern void kobject_put(struct kobject *); +extern struct kobject *kobject_get(struct kobject *kobj); +extern void kobject_put(struct kobject *kobj); -extern char * kobject_get_path(struct kobject *, gfp_t); +extern char *kobject_get_path(struct kobject *kobj, gfp_t flag); struct kobj_type { - void (*release)(struct kobject *); - struct sysfs_ops * sysfs_ops; - struct attribute ** default_attrs; + void (*release)(struct kobject *kobj); + struct sysfs_ops *sysfs_ops; + struct attribute **default_attrs; }; struct kobj_uevent_env { @@ -153,30 +152,30 @@ extern struct sysfs_ops kobj_sysfs_ops; * desired. */ struct kset { - struct list_head list; - spinlock_t list_lock; - struct kobject kobj; - struct kset_uevent_ops *uevent_ops; + struct list_head list; + spinlock_t list_lock; + struct kobject kobj; + struct kset_uevent_ops *uevent_ops; }; -extern void kset_init(struct kset * k); -extern int __must_check kset_register(struct kset * k); -extern void kset_unregister(struct kset * k); +extern void kset_init(struct kset *kset); +extern int __must_check kset_register(struct kset *kset); +extern void kset_unregister(struct kset *kset); extern struct kset * __must_check kset_create_and_add(const char *name, struct kset_uevent_ops *u, struct kobject *parent_kobj); -static inline struct kset * to_kset(struct kobject * kobj) +static inline struct kset *to_kset(struct kobject *kobj) { - return kobj ? container_of(kobj,struct kset,kobj) : NULL; + return kobj ? container_of(kobj, struct kset, kobj) : NULL; } -static inline struct kset * kset_get(struct kset * k) +static inline struct kset *kset_get(struct kset *k) { return k ? to_kset(kobject_get(&k->kobj)) : NULL; } -static inline void kset_put(struct kset * k) +static inline void kset_put(struct kset *k) { kobject_put(&k->kobj); } @@ -186,7 +185,7 @@ static inline struct kobj_type *get_ktype(struct kobject *kobj) return kobj->ktype; } -extern struct kobject * kset_find_obj(struct kset *, const char *); +extern struct kobject *kset_find_obj(struct kset *, const char *); /* The global /sys/kernel/ kobject for people to chain off of */ extern struct kobject *kernel_kobj; @@ -208,18 +207,20 @@ int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...) int kobject_action_type(const char *buf, size_t count, enum kobject_action *type); #else -static inline int kobject_uevent(struct kobject *kobj, enum kobject_action action) +static inline int kobject_uevent(struct kobject *kobj, + enum kobject_action action) { return 0; } static inline int kobject_uevent_env(struct kobject *kobj, enum kobject_action action, char *envp[]) { return 0; } -static inline int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...) +static inline int add_uevent_var(struct kobj_uevent_env *env, + const char *format, ...) { return 0; } static inline int kobject_action_type(const char *buf, size_t count, - enum kobject_action *type) + enum kobject_action *type) { return -EINVAL; } #endif -- cgit v1.2.3-59-g8ed1b From e374a2bfebf359f846216336de91670be40499da Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 24 Jan 2008 21:59:04 -0800 Subject: Kobject: fix coding style issues in kobject c files Clean up the kobject.c and kobject_uevent.c files to follow the proper coding style rules. Signed-off-by: Greg Kroah-Hartman --- lib/kobject.c | 139 ++++++++++++++++++++++++--------------------------- lib/kobject_uevent.c | 7 ++- 2 files changed, 67 insertions(+), 79 deletions(-) diff --git a/lib/kobject.c b/lib/kobject.c index 8dc32454661d..1d63ead1815e 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -18,58 +18,57 @@ #include #include -/** - * populate_dir - populate directory with attributes. - * @kobj: object we're working on. - * - * Most subsystems have a set of default attributes that - * are associated with an object that registers with them. - * This is a helper called during object registration that - * loops through the default attributes of the subsystem - * and creates attributes files for them in sysfs. +/* + * populate_dir - populate directory with attributes. + * @kobj: object we're working on. * + * Most subsystems have a set of default attributes that are associated + * with an object that registers with them. This is a helper called during + * object registration that loops through the default attributes of the + * subsystem and creates attributes files for them in sysfs. */ - -static int populate_dir(struct kobject * kobj) +static int populate_dir(struct kobject *kobj) { - struct kobj_type * t = get_ktype(kobj); - struct attribute * attr; + struct kobj_type *t = get_ktype(kobj); + struct attribute *attr; int error = 0; int i; - + if (t && t->default_attrs) { for (i = 0; (attr = t->default_attrs[i]) != NULL; i++) { - if ((error = sysfs_create_file(kobj,attr))) + error = sysfs_create_file(kobj, attr); + if (error) break; } } return error; } -static int create_dir(struct kobject * kobj) +static int create_dir(struct kobject *kobj) { int error = 0; if (kobject_name(kobj)) { error = sysfs_create_dir(kobj); if (!error) { - if ((error = populate_dir(kobj))) + error = populate_dir(kobj); + if (error) sysfs_remove_dir(kobj); } } return error; } -static inline struct kobject * to_kobj(struct list_head * entry) +static inline struct kobject *to_kobj(struct list_head *entry) { - return container_of(entry,struct kobject,entry); + return container_of(entry, struct kobject, entry); } static int get_kobj_path_length(struct kobject *kobj) { int length = 1; - struct kobject * parent = kobj; + struct kobject *parent = kobj; - /* walk up the ancestors until we hit the one pointing to the + /* walk up the ancestors until we hit the one pointing to the * root. * Add 1 to strlen for leading '/' of each level. */ @@ -84,19 +83,19 @@ static int get_kobj_path_length(struct kobject *kobj) static void fill_kobj_path(struct kobject *kobj, char *path, int length) { - struct kobject * parent; + struct kobject *parent; --length; for (parent = kobj; parent; parent = parent->parent) { int cur = strlen(kobject_name(parent)); /* back up enough to print this name with '/' */ length -= cur; - strncpy (path + length, kobject_name(parent), cur); + strncpy(path + length, kobject_name(parent), cur); *(path + --length) = '/'; } pr_debug("kobject: '%s' (%p): %s: path = '%s'\n", kobject_name(kobj), - kobj, __FUNCTION__,path); + kobj, __FUNCTION__, path); } /** @@ -148,7 +147,7 @@ static void kobj_kset_leave(struct kobject *kobj) kset_put(kobj->kset); } -static void kobject_init_internal(struct kobject * kobj) +static void kobject_init_internal(struct kobject *kobj) { if (!kobj) return; @@ -160,7 +159,7 @@ static void kobject_init_internal(struct kobject * kobj) static int kobject_add_internal(struct kobject *kobj) { int error = 0; - struct kobject * parent; + struct kobject *parent; if (!kobj) return -ENOENT; @@ -185,7 +184,7 @@ static int kobject_add_internal(struct kobject *kobj) pr_debug("kobject: '%s' (%p): %s: parent: '%s', set: '%s'\n", kobject_name(kobj), kobj, __FUNCTION__, parent ? kobject_name(parent) : "", - kobj->kset ? kobject_name(&kobj->kset->kobj) : "" ); + kobj->kset ? kobject_name(&kobj->kset->kobj) : ""); error = create_dir(kobj); if (error) { @@ -399,12 +398,11 @@ int kobject_init_and_add(struct kobject *kobj, struct kobj_type *ktype, EXPORT_SYMBOL_GPL(kobject_init_and_add); /** - * kobject_rename - change the name of an object - * @kobj: object in question. - * @new_name: object's new name + * kobject_rename - change the name of an object + * @kobj: object in question. + * @new_name: object's new name */ - -int kobject_rename(struct kobject * kobj, const char *new_name) +int kobject_rename(struct kobject *kobj, const char *new_name) { int error = 0; const char *devpath = NULL; @@ -461,11 +459,10 @@ out: } /** - * kobject_move - move object to another parent - * @kobj: object in question. - * @new_parent: object's new parent (can be NULL) + * kobject_move - move object to another parent + * @kobj: object in question. + * @new_parent: object's new parent (can be NULL) */ - int kobject_move(struct kobject *kobj, struct kobject *new_parent) { int error; @@ -513,11 +510,10 @@ out: } /** - * kobject_del - unlink kobject from hierarchy. - * @kobj: object. + * kobject_del - unlink kobject from hierarchy. + * @kobj: object. */ - -void kobject_del(struct kobject * kobj) +void kobject_del(struct kobject *kobj) { if (!kobj) return; @@ -530,11 +526,10 @@ void kobject_del(struct kobject * kobj) } /** - * kobject_get - increment refcount for object. - * @kobj: object. + * kobject_get - increment refcount for object. + * @kobj: object. */ - -struct kobject * kobject_get(struct kobject * kobj) +struct kobject *kobject_get(struct kobject *kobj) { if (kobj) kref_get(&kobj->kref); @@ -591,12 +586,12 @@ static void kobject_release(struct kref *kref) } /** - * kobject_put - decrement refcount for object. - * @kobj: object. + * kobject_put - decrement refcount for object. + * @kobj: object. * - * Decrement the refcount, and if 0, call kobject_cleanup(). + * Decrement the refcount, and if 0, call kobject_cleanup(). */ -void kobject_put(struct kobject * kobj) +void kobject_put(struct kobject *kobj) { if (kobj) kref_put(&kobj->kref, kobject_release); @@ -670,11 +665,10 @@ struct kobject *kobject_create_and_add(const char *name, struct kobject *parent) EXPORT_SYMBOL_GPL(kobject_create_and_add); /** - * kset_init - initialize a kset for use - * @k: kset + * kset_init - initialize a kset for use + * @k: kset */ - -void kset_init(struct kset * k) +void kset_init(struct kset *k) { kobject_init_internal(&k->kobj); INIT_LIST_HEAD(&k->list); @@ -712,11 +706,10 @@ struct sysfs_ops kobj_sysfs_ops = { }; /** - * kset_register - initialize and add a kset. - * @k: kset. + * kset_register - initialize and add a kset. + * @k: kset. */ - -int kset_register(struct kset * k) +int kset_register(struct kset *k) { int err; @@ -731,39 +724,35 @@ int kset_register(struct kset * k) return 0; } - /** - * kset_unregister - remove a kset. - * @k: kset. + * kset_unregister - remove a kset. + * @k: kset. */ - -void kset_unregister(struct kset * k) +void kset_unregister(struct kset *k) { if (!k) return; kobject_put(&k->kobj); } - /** - * kset_find_obj - search for object in kset. - * @kset: kset we're looking in. - * @name: object's name. + * kset_find_obj - search for object in kset. + * @kset: kset we're looking in. + * @name: object's name. * - * Lock kset via @kset->subsys, and iterate over @kset->list, - * looking for a matching kobject. If matching object is found - * take a reference and return the object. + * Lock kset via @kset->subsys, and iterate over @kset->list, + * looking for a matching kobject. If matching object is found + * take a reference and return the object. */ - -struct kobject * kset_find_obj(struct kset * kset, const char * name) +struct kobject *kset_find_obj(struct kset *kset, const char *name) { - struct list_head * entry; - struct kobject * ret = NULL; + struct list_head *entry; + struct kobject *ret = NULL; spin_lock(&kset->list_lock); - list_for_each(entry,&kset->list) { - struct kobject * k = to_kobj(entry); - if (kobject_name(k) && !strcmp(kobject_name(k),name)) { + list_for_each(entry, &kset->list) { + struct kobject *k = to_kobj(entry); + if (kobject_name(k) && !strcmp(kobject_name(k), name)) { ret = kobject_get(k); break; } diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c index b021e67c4294..5a402e2982af 100644 --- a/lib/kobject_uevent.c +++ b/lib/kobject_uevent.c @@ -238,11 +238,12 @@ int kobject_uevent_env(struct kobject *kobj, enum kobject_action action, retval = add_uevent_var(env, "HOME=/"); if (retval) goto exit; - retval = add_uevent_var(env, "PATH=/sbin:/bin:/usr/sbin:/usr/bin"); + retval = add_uevent_var(env, + "PATH=/sbin:/bin:/usr/sbin:/usr/bin"); if (retval) goto exit; - call_usermodehelper (argv[0], argv, env->envp, UMH_WAIT_EXEC); + call_usermodehelper(argv[0], argv, env->envp, UMH_WAIT_EXEC); } exit: @@ -250,7 +251,6 @@ exit: kfree(env); return retval; } - EXPORT_SYMBOL_GPL(kobject_uevent_env); /** @@ -266,7 +266,6 @@ int kobject_uevent(struct kobject *kobj, enum kobject_action action) { return kobject_uevent_env(kobj, action, NULL); } - EXPORT_SYMBOL_GPL(kobject_uevent); /** -- cgit v1.2.3-59-g8ed1b From 4a3ad20ccd8f4d2a0535cf98fa83f7b561ba59a9 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 24 Jan 2008 22:50:12 -0800 Subject: Driver core: coding style fixes Fix up a number of coding style issues in the drivers/base/ directory that have annoyed me over the years. checkpatch.pl is now very happy. Signed-off-by: Greg Kroah-Hartman --- drivers/base/base.h | 14 +-- drivers/base/bus.c | 290 +++++++++++++++++++++++------------------------- drivers/base/class.c | 140 +++++++++++------------ drivers/base/core.c | 203 ++++++++++++++++----------------- drivers/base/dd.c | 119 ++++++++++---------- drivers/base/driver.c | 120 +++++++++----------- drivers/base/init.c | 9 +- drivers/base/platform.c | 233 +++++++++++++++++++------------------- 8 files changed, 545 insertions(+), 583 deletions(-) diff --git a/drivers/base/base.h b/drivers/base/base.h index f7ad65a249cb..c0444146c09a 100644 --- a/drivers/base/base.h +++ b/drivers/base/base.h @@ -50,15 +50,15 @@ extern int platform_bus_init(void); extern int system_bus_init(void); extern int cpu_dev_init(void); -extern int bus_add_device(struct device * dev); -extern void bus_attach_device(struct device * dev); -extern void bus_remove_device(struct device * dev); +extern int bus_add_device(struct device *dev); +extern void bus_attach_device(struct device *dev); +extern void bus_remove_device(struct device *dev); -extern int bus_add_driver(struct device_driver *); -extern void bus_remove_driver(struct device_driver *); +extern int bus_add_driver(struct device_driver *drv); +extern void bus_remove_driver(struct device_driver *drv); -extern void driver_detach(struct device_driver * drv); -extern int driver_probe_device(struct device_driver *, struct device *); +extern void driver_detach(struct device_driver *drv); +extern int driver_probe_device(struct device_driver *drv, struct device *dev); extern void sysdev_shutdown(void); extern int sysdev_suspend(pm_message_t state); diff --git a/drivers/base/bus.c b/drivers/base/bus.c index a377b65ba328..f484495b2ad1 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -46,10 +46,10 @@ static void bus_put(struct bus_type *bus) kset_put(&bus->p->subsys); } -static ssize_t -drv_attr_show(struct kobject * kobj, struct attribute * attr, char * buf) +static ssize_t drv_attr_show(struct kobject *kobj, struct attribute *attr, + char *buf) { - struct driver_attribute * drv_attr = to_drv_attr(attr); + struct driver_attribute *drv_attr = to_drv_attr(attr); struct driver_private *drv_priv = to_driver(kobj); ssize_t ret = -EIO; @@ -58,11 +58,10 @@ drv_attr_show(struct kobject * kobj, struct attribute * attr, char * buf) return ret; } -static ssize_t -drv_attr_store(struct kobject * kobj, struct attribute * attr, - const char * buf, size_t count) +static ssize_t drv_attr_store(struct kobject *kobj, struct attribute *attr, + const char *buf, size_t count) { - struct driver_attribute * drv_attr = to_drv_attr(attr); + struct driver_attribute *drv_attr = to_drv_attr(attr); struct driver_private *drv_priv = to_driver(kobj); ssize_t ret = -EIO; @@ -89,16 +88,13 @@ static struct kobj_type driver_ktype = { .release = driver_release, }; - /* * sysfs bindings for buses */ - - -static ssize_t -bus_attr_show(struct kobject * kobj, struct attribute * attr, char * buf) +static ssize_t bus_attr_show(struct kobject *kobj, struct attribute *attr, + char *buf) { - struct bus_attribute * bus_attr = to_bus_attr(attr); + struct bus_attribute *bus_attr = to_bus_attr(attr); struct bus_type_private *bus_priv = to_bus(kobj); ssize_t ret = 0; @@ -107,11 +103,10 @@ bus_attr_show(struct kobject * kobj, struct attribute * attr, char * buf) return ret; } -static ssize_t -bus_attr_store(struct kobject * kobj, struct attribute * attr, - const char * buf, size_t count) +static ssize_t bus_attr_store(struct kobject *kobj, struct attribute *attr, + const char *buf, size_t count) { - struct bus_attribute * bus_attr = to_bus_attr(attr); + struct bus_attribute *bus_attr = to_bus_attr(attr); struct bus_type_private *bus_priv = to_bus(kobj); ssize_t ret = 0; @@ -125,7 +120,7 @@ static struct sysfs_ops bus_sysfs_ops = { .store = bus_attr_store, }; -int bus_create_file(struct bus_type * bus, struct bus_attribute * attr) +int bus_create_file(struct bus_type *bus, struct bus_attribute *attr) { int error; if (bus_get(bus)) { @@ -135,14 +130,16 @@ int bus_create_file(struct bus_type * bus, struct bus_attribute * attr) error = -EINVAL; return error; } +EXPORT_SYMBOL_GPL(bus_create_file); -void bus_remove_file(struct bus_type * bus, struct bus_attribute * attr) +void bus_remove_file(struct bus_type *bus, struct bus_attribute *attr) { if (bus_get(bus)) { sysfs_remove_file(&bus->p->subsys.kobj, &attr->attr); bus_put(bus); } } +EXPORT_SYMBOL_GPL(bus_remove_file); static struct kobj_type bus_ktype = { .sysfs_ops = &bus_sysfs_ops, @@ -219,10 +216,13 @@ static ssize_t driver_bind(struct device_driver *drv, if (dev->parent) up(&dev->parent->sem); - if (err > 0) /* success */ + if (err > 0) { + /* success */ err = count; - else if (err == 0) /* driver didn't accept device */ + } else if (err == 0) { + /* driver didn't accept device */ err = -ENODEV; + } } put_device(dev); bus_put(bus); @@ -259,37 +259,36 @@ static ssize_t store_drivers_probe(struct bus_type *bus, } #endif -static struct device * next_device(struct klist_iter * i) +static struct device *next_device(struct klist_iter *i) { - struct klist_node * n = klist_next(i); + struct klist_node *n = klist_next(i); return n ? container_of(n, struct device, knode_bus) : NULL; } /** - * bus_for_each_dev - device iterator. - * @bus: bus type. - * @start: device to start iterating from. - * @data: data for the callback. - * @fn: function to be called for each device. + * bus_for_each_dev - device iterator. + * @bus: bus type. + * @start: device to start iterating from. + * @data: data for the callback. + * @fn: function to be called for each device. * - * Iterate over @bus's list of devices, and call @fn for each, - * passing it @data. If @start is not NULL, we use that device to - * begin iterating from. + * Iterate over @bus's list of devices, and call @fn for each, + * passing it @data. If @start is not NULL, we use that device to + * begin iterating from. * - * We check the return of @fn each time. If it returns anything - * other than 0, we break out and return that value. + * We check the return of @fn each time. If it returns anything + * other than 0, we break out and return that value. * - * NOTE: The device that returns a non-zero value is not retained - * in any way, nor is its refcount incremented. If the caller needs - * to retain this data, it should do, and increment the reference - * count in the supplied callback. + * NOTE: The device that returns a non-zero value is not retained + * in any way, nor is its refcount incremented. If the caller needs + * to retain this data, it should do, and increment the reference + * count in the supplied callback. */ - -int bus_for_each_dev(struct bus_type * bus, struct device * start, - void * data, int (*fn)(struct device *, void *)) +int bus_for_each_dev(struct bus_type *bus, struct device *start, + void *data, int (*fn)(struct device *, void *)) { struct klist_iter i; - struct device * dev; + struct device *dev; int error = 0; if (!bus) @@ -302,6 +301,7 @@ int bus_for_each_dev(struct bus_type * bus, struct device * start, klist_iter_exit(&i); return error; } +EXPORT_SYMBOL_GPL(bus_for_each_dev); /** * bus_find_device - device iterator for locating a particular device. @@ -318,9 +318,9 @@ int bus_for_each_dev(struct bus_type * bus, struct device * start, * if it does. If the callback returns non-zero, this function will * return to the caller and not iterate over any more devices. */ -struct device * bus_find_device(struct bus_type *bus, - struct device *start, void *data, - int (*match)(struct device *, void *)) +struct device *bus_find_device(struct bus_type *bus, + struct device *start, void *data, + int (*match)(struct device *dev, void *data)) { struct klist_iter i; struct device *dev; @@ -336,11 +336,11 @@ struct device * bus_find_device(struct bus_type *bus, klist_iter_exit(&i); return dev; } +EXPORT_SYMBOL_GPL(bus_find_device); - -static struct device_driver * next_driver(struct klist_iter * i) +static struct device_driver *next_driver(struct klist_iter *i) { - struct klist_node * n = klist_next(i); + struct klist_node *n = klist_next(i); struct driver_private *drv_priv; if (n) { @@ -351,30 +351,29 @@ static struct device_driver * next_driver(struct klist_iter * i) } /** - * bus_for_each_drv - driver iterator - * @bus: bus we're dealing with. - * @start: driver to start iterating on. - * @data: data to pass to the callback. - * @fn: function to call for each driver. + * bus_for_each_drv - driver iterator + * @bus: bus we're dealing with. + * @start: driver to start iterating on. + * @data: data to pass to the callback. + * @fn: function to call for each driver. * - * This is nearly identical to the device iterator above. - * We iterate over each driver that belongs to @bus, and call - * @fn for each. If @fn returns anything but 0, we break out - * and return it. If @start is not NULL, we use it as the head - * of the list. + * This is nearly identical to the device iterator above. + * We iterate over each driver that belongs to @bus, and call + * @fn for each. If @fn returns anything but 0, we break out + * and return it. If @start is not NULL, we use it as the head + * of the list. * - * NOTE: we don't return the driver that returns a non-zero - * value, nor do we leave the reference count incremented for that - * driver. If the caller needs to know that info, it must set it - * in the callback. It must also be sure to increment the refcount - * so it doesn't disappear before returning to the caller. + * NOTE: we don't return the driver that returns a non-zero + * value, nor do we leave the reference count incremented for that + * driver. If the caller needs to know that info, it must set it + * in the callback. It must also be sure to increment the refcount + * so it doesn't disappear before returning to the caller. */ - -int bus_for_each_drv(struct bus_type * bus, struct device_driver * start, - void * data, int (*fn)(struct device_driver *, void *)) +int bus_for_each_drv(struct bus_type *bus, struct device_driver *start, + void *data, int (*fn)(struct device_driver *, void *)) { struct klist_iter i; - struct device_driver * drv; + struct device_driver *drv; int error = 0; if (!bus) @@ -387,6 +386,7 @@ int bus_for_each_drv(struct bus_type * bus, struct device_driver * start, klist_iter_exit(&i); return error; } +EXPORT_SYMBOL_GPL(bus_for_each_drv); static int device_add_attrs(struct bus_type *bus, struct device *dev) { @@ -397,7 +397,7 @@ static int device_add_attrs(struct bus_type *bus, struct device *dev) return 0; for (i = 0; attr_name(bus->dev_attrs[i]); i++) { - error = device_create_file(dev,&bus->dev_attrs[i]); + error = device_create_file(dev, &bus->dev_attrs[i]); if (error) { while (--i >= 0) device_remove_file(dev, &bus->dev_attrs[i]); @@ -407,13 +407,13 @@ static int device_add_attrs(struct bus_type *bus, struct device *dev) return error; } -static void device_remove_attrs(struct bus_type * bus, struct device * dev) +static void device_remove_attrs(struct bus_type *bus, struct device *dev) { int i; if (bus->dev_attrs) { for (i = 0; attr_name(bus->dev_attrs[i]); i++) - device_remove_file(dev,&bus->dev_attrs[i]); + device_remove_file(dev, &bus->dev_attrs[i]); } } @@ -434,15 +434,15 @@ static inline void remove_deprecated_bus_links(struct device *dev) { } #endif /** - * bus_add_device - add device to bus - * @dev: device being added + * bus_add_device - add device to bus + * @dev: device being added * - * - Add the device to its bus's list of devices. - * - Create link to device's bus. + * - Add the device to its bus's list of devices. + * - Create link to device's bus. */ -int bus_add_device(struct device * dev) +int bus_add_device(struct device *dev) { - struct bus_type * bus = bus_get(dev->bus); + struct bus_type *bus = bus_get(dev->bus); int error = 0; if (bus) { @@ -476,13 +476,13 @@ out_put: } /** - * bus_attach_device - add device to bus - * @dev: device tried to attach to a driver + * bus_attach_device - add device to bus + * @dev: device tried to attach to a driver * - * - Add device to bus's list of devices. - * - Try to attach to driver. + * - Add device to bus's list of devices. + * - Try to attach to driver. */ -void bus_attach_device(struct device * dev) +void bus_attach_device(struct device *dev) { struct bus_type *bus = dev->bus; int ret = 0; @@ -500,32 +500,34 @@ void bus_attach_device(struct device * dev) } /** - * bus_remove_device - remove device from bus - * @dev: device to be removed + * bus_remove_device - remove device from bus + * @dev: device to be removed * - * - Remove symlink from bus's directory. - * - Delete device from bus's list. - * - Detach from its driver. - * - Drop reference taken in bus_add_device(). + * - Remove symlink from bus's directory. + * - Delete device from bus's list. + * - Detach from its driver. + * - Drop reference taken in bus_add_device(). */ -void bus_remove_device(struct device * dev) +void bus_remove_device(struct device *dev) { if (dev->bus) { sysfs_remove_link(&dev->kobj, "subsystem"); remove_deprecated_bus_links(dev); - sysfs_remove_link(&dev->bus->p->devices_kset->kobj, dev->bus_id); + sysfs_remove_link(&dev->bus->p->devices_kset->kobj, + dev->bus_id); device_remove_attrs(dev->bus, dev); if (dev->is_registered) { dev->is_registered = 0; klist_del(&dev->knode_bus); } - pr_debug("bus: '%s': remove device %s\n", dev->bus->name, dev->bus_id); + pr_debug("bus: '%s': remove device %s\n", + dev->bus->name, dev->bus_id); device_release_driver(dev); bus_put(dev->bus); } } -static int driver_add_attrs(struct bus_type * bus, struct device_driver * drv) +static int driver_add_attrs(struct bus_type *bus, struct device_driver *drv) { int error = 0; int i; @@ -534,19 +536,19 @@ static int driver_add_attrs(struct bus_type * bus, struct device_driver * drv) for (i = 0; attr_name(bus->drv_attrs[i]); i++) { error = driver_create_file(drv, &bus->drv_attrs[i]); if (error) - goto Err; + goto err; } } - Done: +done: return error; - Err: +err: while (--i >= 0) driver_remove_file(drv, &bus->drv_attrs[i]); - goto Done; + goto done; } - -static void driver_remove_attrs(struct bus_type * bus, struct device_driver * drv) +static void driver_remove_attrs(struct bus_type *bus, + struct device_driver *drv) { int i; @@ -623,9 +625,8 @@ static ssize_t driver_uevent_store(struct device_driver *drv, static DRIVER_ATTR(uevent, S_IWUSR, NULL, driver_uevent_store); /** - * bus_add_driver - Add a driver to the bus. - * @drv: driver. - * + * bus_add_driver - Add a driver to the bus. + * @drv: driver. */ int bus_add_driver(struct device_driver *drv) { @@ -688,15 +689,14 @@ out_put_bus: } /** - * bus_remove_driver - delete driver from bus's knowledge. - * @drv: driver. + * bus_remove_driver - delete driver from bus's knowledge. + * @drv: driver. * - * Detach the driver from the devices it controls, and remove - * it from its bus's list of drivers. Finally, we drop the reference - * to the bus we took in bus_add_driver(). + * Detach the driver from the devices it controls, and remove + * it from its bus's list of drivers. Finally, we drop the reference + * to the bus we took in bus_add_driver(). */ - -void bus_remove_driver(struct device_driver * drv) +void bus_remove_driver(struct device_driver *drv) { if (!drv->bus) return; @@ -712,10 +712,9 @@ void bus_remove_driver(struct device_driver * drv) bus_put(drv->bus); } - /* Helper for bus_rescan_devices's iter */ static int __must_check bus_rescan_devices_helper(struct device *dev, - void *data) + void *data) { int ret = 0; @@ -737,10 +736,11 @@ static int __must_check bus_rescan_devices_helper(struct device *dev, * attached and rescan it against existing drivers to see if it matches * any by calling device_attach() for the unbound devices. */ -int bus_rescan_devices(struct bus_type * bus) +int bus_rescan_devices(struct bus_type *bus) { return bus_for_each_dev(bus, NULL, NULL, bus_rescan_devices_helper); } +EXPORT_SYMBOL_GPL(bus_rescan_devices); /** * device_reprobe - remove driver for a device and probe for a new driver @@ -765,55 +765,55 @@ int device_reprobe(struct device *dev) EXPORT_SYMBOL_GPL(device_reprobe); /** - * find_bus - locate bus by name. - * @name: name of bus. + * find_bus - locate bus by name. + * @name: name of bus. * - * Call kset_find_obj() to iterate over list of buses to - * find a bus by name. Return bus if found. + * Call kset_find_obj() to iterate over list of buses to + * find a bus by name. Return bus if found. * - * Note that kset_find_obj increments bus' reference count. + * Note that kset_find_obj increments bus' reference count. */ #if 0 -struct bus_type * find_bus(char * name) +struct bus_type *find_bus(char *name) { - struct kobject * k = kset_find_obj(bus_kset, name); + struct kobject *k = kset_find_obj(bus_kset, name); return k ? to_bus(k) : NULL; } #endif /* 0 */ /** - * bus_add_attrs - Add default attributes for this bus. - * @bus: Bus that has just been registered. + * bus_add_attrs - Add default attributes for this bus. + * @bus: Bus that has just been registered. */ -static int bus_add_attrs(struct bus_type * bus) +static int bus_add_attrs(struct bus_type *bus) { int error = 0; int i; if (bus->bus_attrs) { for (i = 0; attr_name(bus->bus_attrs[i]); i++) { - error = bus_create_file(bus,&bus->bus_attrs[i]); + error = bus_create_file(bus, &bus->bus_attrs[i]); if (error) - goto Err; + goto err; } } - Done: +done: return error; - Err: +err: while (--i >= 0) - bus_remove_file(bus,&bus->bus_attrs[i]); - goto Done; + bus_remove_file(bus, &bus->bus_attrs[i]); + goto done; } -static void bus_remove_attrs(struct bus_type * bus) +static void bus_remove_attrs(struct bus_type *bus) { int i; if (bus->bus_attrs) { for (i = 0; attr_name(bus->bus_attrs[i]); i++) - bus_remove_file(bus,&bus->bus_attrs[i]); + bus_remove_file(bus, &bus->bus_attrs[i]); } } @@ -843,14 +843,14 @@ static ssize_t bus_uevent_store(struct bus_type *bus, static BUS_ATTR(uevent, S_IWUSR, NULL, bus_uevent_store); /** - * bus_register - register a bus with the system. - * @bus: bus. + * bus_register - register a bus with the system. + * @bus: bus. * - * Once we have that, we registered the bus with the kobject - * infrastructure, then register the children subsystems it has: - * the devices and drivers that belong to the bus. + * Once we have that, we registered the bus with the kobject + * infrastructure, then register the children subsystems it has: + * the devices and drivers that belong to the bus. */ -int bus_register(struct bus_type * bus) +int bus_register(struct bus_type *bus) { int retval; struct bus_type_private *priv; @@ -922,15 +922,16 @@ bus_uevent_fail: out: return retval; } +EXPORT_SYMBOL_GPL(bus_register); /** - * bus_unregister - remove a bus from the system - * @bus: bus. + * bus_unregister - remove a bus from the system + * @bus: bus. * - * Unregister the child subsystems and the bus itself. - * Finally, we call bus_put() to release the refcount + * Unregister the child subsystems and the bus itself. + * Finally, we call bus_put() to release the refcount */ -void bus_unregister(struct bus_type * bus) +void bus_unregister(struct bus_type *bus) { pr_debug("bus: '%s': unregistering\n", bus->name); bus_remove_attrs(bus); @@ -941,6 +942,7 @@ void bus_unregister(struct bus_type * bus) kset_unregister(&bus->p->subsys); kfree(bus->p); } +EXPORT_SYMBOL_GPL(bus_unregister); int bus_register_notifier(struct bus_type *bus, struct notifier_block *nb) { @@ -973,15 +975,3 @@ int __init buses_init(void) return -ENOMEM; return 0; } - - -EXPORT_SYMBOL_GPL(bus_for_each_dev); -EXPORT_SYMBOL_GPL(bus_find_device); -EXPORT_SYMBOL_GPL(bus_for_each_drv); - -EXPORT_SYMBOL_GPL(bus_register); -EXPORT_SYMBOL_GPL(bus_unregister); -EXPORT_SYMBOL_GPL(bus_rescan_devices); - -EXPORT_SYMBOL_GPL(bus_create_file); -EXPORT_SYMBOL_GPL(bus_remove_file); diff --git a/drivers/base/class.c b/drivers/base/class.c index 9f737ff0fc71..59cf35894cfc 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -23,11 +23,11 @@ #define to_class_attr(_attr) container_of(_attr, struct class_attribute, attr) #define to_class(obj) container_of(obj, struct class, subsys.kobj) -static ssize_t -class_attr_show(struct kobject * kobj, struct attribute * attr, char * buf) +static ssize_t class_attr_show(struct kobject *kobj, struct attribute *attr, + char *buf) { - struct class_attribute * class_attr = to_class_attr(attr); - struct class * dc = to_class(kobj); + struct class_attribute *class_attr = to_class_attr(attr); + struct class *dc = to_class(kobj); ssize_t ret = -EIO; if (class_attr->show) @@ -35,12 +35,11 @@ class_attr_show(struct kobject * kobj, struct attribute * attr, char * buf) return ret; } -static ssize_t -class_attr_store(struct kobject * kobj, struct attribute * attr, - const char * buf, size_t count) +static ssize_t class_attr_store(struct kobject *kobj, struct attribute *attr, + const char *buf, size_t count) { - struct class_attribute * class_attr = to_class_attr(attr); - struct class * dc = to_class(kobj); + struct class_attribute *class_attr = to_class_attr(attr); + struct class *dc = to_class(kobj); ssize_t ret = -EIO; if (class_attr->store) @@ -48,7 +47,7 @@ class_attr_store(struct kobject * kobj, struct attribute * attr, return ret; } -static void class_release(struct kobject * kobj) +static void class_release(struct kobject *kobj) { struct class *class = to_class(kobj); @@ -75,17 +74,17 @@ static struct kobj_type class_ktype = { static struct kset *class_kset; -int class_create_file(struct class * cls, const struct class_attribute * attr) +int class_create_file(struct class *cls, const struct class_attribute *attr) { int error; - if (cls) { + if (cls) error = sysfs_create_file(&cls->subsys.kobj, &attr->attr); - } else + else error = -EINVAL; return error; } -void class_remove_file(struct class * cls, const struct class_attribute * attr) +void class_remove_file(struct class *cls, const struct class_attribute *attr) { if (cls) sysfs_remove_file(&cls->subsys.kobj, &attr->attr); @@ -94,48 +93,48 @@ void class_remove_file(struct class * cls, const struct class_attribute * attr) static struct class *class_get(struct class *cls) { if (cls) - return container_of(kset_get(&cls->subsys), struct class, subsys); + return container_of(kset_get(&cls->subsys), + struct class, subsys); return NULL; } -static void class_put(struct class * cls) +static void class_put(struct class *cls) { if (cls) kset_put(&cls->subsys); } - -static int add_class_attrs(struct class * cls) +static int add_class_attrs(struct class *cls) { int i; int error = 0; if (cls->class_attrs) { for (i = 0; attr_name(cls->class_attrs[i]); i++) { - error = class_create_file(cls,&cls->class_attrs[i]); + error = class_create_file(cls, &cls->class_attrs[i]); if (error) - goto Err; + goto error; } } - Done: +done: return error; - Err: +error: while (--i >= 0) - class_remove_file(cls,&cls->class_attrs[i]); - goto Done; + class_remove_file(cls, &cls->class_attrs[i]); + goto done; } -static void remove_class_attrs(struct class * cls) +static void remove_class_attrs(struct class *cls) { int i; if (cls->class_attrs) { for (i = 0; attr_name(cls->class_attrs[i]); i++) - class_remove_file(cls,&cls->class_attrs[i]); + class_remove_file(cls, &cls->class_attrs[i]); } } -int class_register(struct class * cls) +int class_register(struct class *cls) { int error; @@ -167,7 +166,7 @@ int class_register(struct class * cls) return error; } -void class_unregister(struct class * cls) +void class_unregister(struct class *cls) { pr_debug("device class '%s': unregistering\n", cls->name); remove_class_attrs(cls); @@ -249,8 +248,8 @@ void class_destroy(struct class *cls) /* Class Device Stuff */ -int class_device_create_file(struct class_device * class_dev, - const struct class_device_attribute * attr) +int class_device_create_file(struct class_device *class_dev, + const struct class_device_attribute *attr) { int error = -EINVAL; if (class_dev) @@ -258,8 +257,8 @@ int class_device_create_file(struct class_device * class_dev, return error; } -void class_device_remove_file(struct class_device * class_dev, - const struct class_device_attribute * attr) +void class_device_remove_file(struct class_device *class_dev, + const struct class_device_attribute *attr) { if (class_dev) sysfs_remove_file(&class_dev->kobj, &attr->attr); @@ -281,12 +280,11 @@ void class_device_remove_bin_file(struct class_device *class_dev, sysfs_remove_bin_file(&class_dev->kobj, attr); } -static ssize_t -class_device_attr_show(struct kobject * kobj, struct attribute * attr, - char * buf) +static ssize_t class_device_attr_show(struct kobject *kobj, + struct attribute *attr, char *buf) { - struct class_device_attribute * class_dev_attr = to_class_dev_attr(attr); - struct class_device * cd = to_class_dev(kobj); + struct class_device_attribute *class_dev_attr = to_class_dev_attr(attr); + struct class_device *cd = to_class_dev(kobj); ssize_t ret = 0; if (class_dev_attr->show) @@ -294,12 +292,12 @@ class_device_attr_show(struct kobject * kobj, struct attribute * attr, return ret; } -static ssize_t -class_device_attr_store(struct kobject * kobj, struct attribute * attr, - const char * buf, size_t count) +static ssize_t class_device_attr_store(struct kobject *kobj, + struct attribute *attr, + const char *buf, size_t count) { - struct class_device_attribute * class_dev_attr = to_class_dev_attr(attr); - struct class_device * cd = to_class_dev(kobj); + struct class_device_attribute *class_dev_attr = to_class_dev_attr(attr); + struct class_device *cd = to_class_dev(kobj); ssize_t ret = 0; if (class_dev_attr->store) @@ -312,10 +310,10 @@ static struct sysfs_ops class_dev_sysfs_ops = { .store = class_device_attr_store, }; -static void class_dev_release(struct kobject * kobj) +static void class_dev_release(struct kobject *kobj) { struct class_device *cd = to_class_dev(kobj); - struct class * cls = cd->class; + struct class *cls = cd->class; pr_debug("device class '%s': release.\n", cd->class_id); @@ -324,8 +322,8 @@ static void class_dev_release(struct kobject * kobj) else if (cls->release) cls->release(cd); else { - printk(KERN_ERR "Class Device '%s' does not have a release() function, " - "it is broken and must be fixed.\n", + printk(KERN_ERR "Class Device '%s' does not have a release() " + "function, it is broken and must be fixed.\n", cd->class_id); WARN_ON(1); } @@ -436,7 +434,8 @@ static int class_uevent(struct kset *kset, struct kobject *kobj, add_uevent_var(env, "PHYSDEVBUS=%s", dev->bus->name); if (dev->driver) - add_uevent_var(env, "PHYSDEVDRIVER=%s", dev->driver->name); + add_uevent_var(env, "PHYSDEVDRIVER=%s", + dev->driver->name); } if (class_dev->uevent) { @@ -469,40 +468,40 @@ static struct kset class_obj_subsys = { .uevent_ops = &class_uevent_ops, }; -static int class_device_add_attrs(struct class_device * cd) +static int class_device_add_attrs(struct class_device *cd) { int i; int error = 0; - struct class * cls = cd->class; + struct class *cls = cd->class; if (cls->class_dev_attrs) { for (i = 0; attr_name(cls->class_dev_attrs[i]); i++) { error = class_device_create_file(cd, - &cls->class_dev_attrs[i]); + &cls->class_dev_attrs[i]); if (error) - goto Err; + goto err; } } - Done: +done: return error; - Err: +err: while (--i >= 0) - class_device_remove_file(cd,&cls->class_dev_attrs[i]); - goto Done; + class_device_remove_file(cd, &cls->class_dev_attrs[i]); + goto done; } -static void class_device_remove_attrs(struct class_device * cd) +static void class_device_remove_attrs(struct class_device *cd) { int i; - struct class * cls = cd->class; + struct class *cls = cd->class; if (cls->class_dev_attrs) { for (i = 0; attr_name(cls->class_dev_attrs[i]); i++) - class_device_remove_file(cd,&cls->class_dev_attrs[i]); + class_device_remove_file(cd, &cls->class_dev_attrs[i]); } } -static int class_device_add_groups(struct class_device * cd) +static int class_device_add_groups(struct class_device *cd) { int i; int error = 0; @@ -512,7 +511,8 @@ static int class_device_add_groups(struct class_device * cd) error = sysfs_create_group(&cd->kobj, cd->groups[i]); if (error) { while (--i >= 0) - sysfs_remove_group(&cd->kobj, cd->groups[i]); + sysfs_remove_group(&cd->kobj, + cd->groups[i]); goto out; } } @@ -521,14 +521,12 @@ out: return error; } -static void class_device_remove_groups(struct class_device * cd) +static void class_device_remove_groups(struct class_device *cd) { int i; - if (cd->groups) { - for (i = 0; cd->groups[i]; i++) { + if (cd->groups) + for (i = 0; cd->groups[i]; i++) sysfs_remove_group(&cd->kobj, cd->groups[i]); - } - } } static ssize_t show_dev(struct class_device *class_dev, char *buf) @@ -653,7 +651,7 @@ int class_device_add(struct class_device *class_dev) out3: kobject_del(&class_dev->kobj); out2: - if(parent_class_dev) + if (parent_class_dev) class_device_put(parent_class_dev); class_put(parent_class); out1: @@ -670,9 +668,11 @@ int class_device_register(struct class_device *class_dev) /** * class_device_create - creates a class device and registers it with sysfs * @cls: pointer to the struct class that this device should be registered to. - * @parent: pointer to the parent struct class_device of this new device, if any. + * @parent: pointer to the parent struct class_device of this new device, if + * any. * @devt: the dev_t for the char device to be added. - * @device: a pointer to a struct device that is assiociated with this class device. + * @device: a pointer to a struct device that is assiociated with this class + * device. * @fmt: string for the class device's name * * This function can be used by char device classes. A struct @@ -796,7 +796,7 @@ void class_device_destroy(struct class *cls, dev_t devt) class_device_unregister(class_dev); } -struct class_device * class_device_get(struct class_device *class_dev) +struct class_device *class_device_get(struct class_device *class_dev) { if (class_dev) return to_class_dev(kobject_get(&class_dev->kobj)); @@ -973,7 +973,7 @@ int class_interface_register(struct class_interface *class_intf) void class_interface_unregister(struct class_interface *class_intf) { - struct class * parent = class_intf->class; + struct class *parent = class_intf->class; struct class_device *class_dev; struct device *dev; diff --git a/drivers/base/core.c b/drivers/base/core.c index f09dde3b1e27..edf3bbeb8d6a 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -24,8 +24,8 @@ #include "base.h" #include "power/power.h" -int (*platform_notify)(struct device * dev) = NULL; -int (*platform_notify_remove)(struct device * dev) = NULL; +int (*platform_notify)(struct device *dev) = NULL; +int (*platform_notify_remove)(struct device *dev) = NULL; /* * sysfs bindings for devices. @@ -51,11 +51,11 @@ EXPORT_SYMBOL(dev_driver_string); #define to_dev(obj) container_of(obj, struct device, kobj) #define to_dev_attr(_attr) container_of(_attr, struct device_attribute, attr) -static ssize_t -dev_attr_show(struct kobject * kobj, struct attribute * attr, char * buf) +static ssize_t dev_attr_show(struct kobject *kobj, struct attribute *attr, + char *buf) { - struct device_attribute * dev_attr = to_dev_attr(attr); - struct device * dev = to_dev(kobj); + struct device_attribute *dev_attr = to_dev_attr(attr); + struct device *dev = to_dev(kobj); ssize_t ret = -EIO; if (dev_attr->show) @@ -63,12 +63,11 @@ dev_attr_show(struct kobject * kobj, struct attribute * attr, char * buf) return ret; } -static ssize_t -dev_attr_store(struct kobject * kobj, struct attribute * attr, - const char * buf, size_t count) +static ssize_t dev_attr_store(struct kobject *kobj, struct attribute *attr, + const char *buf, size_t count) { - struct device_attribute * dev_attr = to_dev_attr(attr); - struct device * dev = to_dev(kobj); + struct device_attribute *dev_attr = to_dev_attr(attr); + struct device *dev = to_dev(kobj); ssize_t ret = -EIO; if (dev_attr->store) @@ -90,9 +89,9 @@ static struct sysfs_ops dev_sysfs_ops = { * reaches 0. We forward the call to the device's release * method, which should handle actually freeing the structure. */ -static void device_release(struct kobject * kobj) +static void device_release(struct kobject *kobj) { - struct device * dev = to_dev(kobj); + struct device *dev = to_dev(kobj); if (dev->release) dev->release(dev); @@ -101,8 +100,8 @@ static void device_release(struct kobject * kobj) else if (dev->class && dev->class->dev_release) dev->class->dev_release(dev); else { - printk(KERN_ERR "Device '%s' does not have a release() function, " - "it is broken and must be fixed.\n", + printk(KERN_ERR "Device '%s' does not have a release() " + "function, it is broken and must be fixed.\n", dev->bus_id); WARN_ON(1); } @@ -185,7 +184,8 @@ static int dev_uevent(struct kset *kset, struct kobject *kobj, add_uevent_var(env, "PHYSDEVBUS=%s", dev->bus->name); if (dev->driver) - add_uevent_var(env, "PHYSDEVDRIVER=%s", dev->driver->name); + add_uevent_var(env, "PHYSDEVDRIVER=%s", + dev->driver->name); } #endif @@ -327,7 +327,8 @@ static int device_add_groups(struct device *dev, error = sysfs_create_group(&dev->kobj, groups[i]); if (error) { while (--i >= 0) - sysfs_remove_group(&dev->kobj, groups[i]); + sysfs_remove_group(&dev->kobj, + groups[i]); break; } } @@ -406,14 +407,12 @@ static struct device_attribute devt_attr = /* kset to create /sys/devices/ */ struct kset *devices_kset; - /** - * device_create_file - create sysfs attribute file for device. - * @dev: device. - * @attr: device attribute descriptor. + * device_create_file - create sysfs attribute file for device. + * @dev: device. + * @attr: device attribute descriptor. */ - -int device_create_file(struct device * dev, struct device_attribute * attr) +int device_create_file(struct device *dev, struct device_attribute *attr) { int error = 0; if (get_device(dev)) { @@ -424,12 +423,11 @@ int device_create_file(struct device * dev, struct device_attribute * attr) } /** - * device_remove_file - remove sysfs attribute file. - * @dev: device. - * @attr: device attribute descriptor. + * device_remove_file - remove sysfs attribute file. + * @dev: device. + * @attr: device attribute descriptor. */ - -void device_remove_file(struct device * dev, struct device_attribute * attr) +void device_remove_file(struct device *dev, struct device_attribute *attr) { if (get_device(dev)) { sysfs_remove_file(&dev->kobj, &attr->attr); @@ -510,18 +508,16 @@ static void klist_children_put(struct klist_node *n) put_device(dev); } - /** - * device_initialize - init device structure. - * @dev: device. + * device_initialize - init device structure. + * @dev: device. * - * This prepares the device for use by other layers, - * including adding it to the device hierarchy. - * It is the first half of device_register(), if called by - * that, though it can also be called separately, so one - * may use @dev's fields (e.g. the refcount). + * This prepares the device for use by other layers, + * including adding it to the device hierarchy. + * It is the first half of device_register(), if called by + * that, though it can also be called separately, so one + * may use @dev's fields (e.g. the refcount). */ - void device_initialize(struct device *dev) { dev->kobj.kset = devices_kset; @@ -754,15 +750,15 @@ static void device_remove_class_symlinks(struct device *dev) } /** - * device_add - add device to device hierarchy. - * @dev: device. + * device_add - add device to device hierarchy. + * @dev: device. * - * This is part 2 of device_register(), though may be called - * separately _iff_ device_initialize() has been called separately. + * This is part 2 of device_register(), though may be called + * separately _iff_ device_initialize() has been called separately. * - * This adds it to the kobject hierarchy via kobject_add(), adds it - * to the global and sibling lists for the device, then - * adds it to the other relevant subsystems of the driver model. + * This adds it to the kobject hierarchy via kobject_add(), adds it + * to the global and sibling lists for the device, then + * adds it to the other relevant subsystems of the driver model. */ int device_add(struct device *dev) { @@ -870,70 +866,63 @@ int device_add(struct device *dev) goto Done; } - /** - * device_register - register a device with the system. - * @dev: pointer to the device structure + * device_register - register a device with the system. + * @dev: pointer to the device structure * - * This happens in two clean steps - initialize the device - * and add it to the system. The two steps can be called - * separately, but this is the easiest and most common. - * I.e. you should only call the two helpers separately if - * have a clearly defined need to use and refcount the device - * before it is added to the hierarchy. + * This happens in two clean steps - initialize the device + * and add it to the system. The two steps can be called + * separately, but this is the easiest and most common. + * I.e. you should only call the two helpers separately if + * have a clearly defined need to use and refcount the device + * before it is added to the hierarchy. */ - int device_register(struct device *dev) { device_initialize(dev); return device_add(dev); } - /** - * get_device - increment reference count for device. - * @dev: device. + * get_device - increment reference count for device. + * @dev: device. * - * This simply forwards the call to kobject_get(), though - * we do take care to provide for the case that we get a NULL - * pointer passed in. + * This simply forwards the call to kobject_get(), though + * we do take care to provide for the case that we get a NULL + * pointer passed in. */ - -struct device * get_device(struct device * dev) +struct device *get_device(struct device *dev) { return dev ? to_dev(kobject_get(&dev->kobj)) : NULL; } - /** - * put_device - decrement reference count. - * @dev: device in question. + * put_device - decrement reference count. + * @dev: device in question. */ -void put_device(struct device * dev) +void put_device(struct device *dev) { /* might_sleep(); */ if (dev) kobject_put(&dev->kobj); } - /** - * device_del - delete device from system. - * @dev: device. + * device_del - delete device from system. + * @dev: device. * - * This is the first part of the device unregistration - * sequence. This removes the device from the lists we control - * from here, has it removed from the other driver model - * subsystems it was added to in device_add(), and removes it - * from the kobject hierarchy. + * This is the first part of the device unregistration + * sequence. This removes the device from the lists we control + * from here, has it removed from the other driver model + * subsystems it was added to in device_add(), and removes it + * from the kobject hierarchy. * - * NOTE: this should be called manually _iff_ device_add() was - * also called manually. + * NOTE: this should be called manually _iff_ device_add() was + * also called manually. */ - -void device_del(struct device * dev) +void device_del(struct device *dev) { - struct device * parent = dev->parent; + struct device *parent = dev->parent; struct class_interface *class_intf; device_pm_remove(dev); @@ -979,47 +968,46 @@ void device_del(struct device * dev) } /** - * device_unregister - unregister device from system. - * @dev: device going away. + * device_unregister - unregister device from system. + * @dev: device going away. * - * We do this in two parts, like we do device_register(). First, - * we remove it from all the subsystems with device_del(), then - * we decrement the reference count via put_device(). If that - * is the final reference count, the device will be cleaned up - * via device_release() above. Otherwise, the structure will - * stick around until the final reference to the device is dropped. + * We do this in two parts, like we do device_register(). First, + * we remove it from all the subsystems with device_del(), then + * we decrement the reference count via put_device(). If that + * is the final reference count, the device will be cleaned up + * via device_release() above. Otherwise, the structure will + * stick around until the final reference to the device is dropped. */ -void device_unregister(struct device * dev) +void device_unregister(struct device *dev) { pr_debug("device: '%s': %s\n", dev->bus_id, __FUNCTION__); device_del(dev); put_device(dev); } - -static struct device * next_device(struct klist_iter * i) +static struct device *next_device(struct klist_iter *i) { - struct klist_node * n = klist_next(i); + struct klist_node *n = klist_next(i); return n ? container_of(n, struct device, knode_parent) : NULL; } /** - * device_for_each_child - device child iterator. - * @parent: parent struct device. - * @data: data for the callback. - * @fn: function to be called for each device. + * device_for_each_child - device child iterator. + * @parent: parent struct device. + * @data: data for the callback. + * @fn: function to be called for each device. * - * Iterate over @parent's child devices, and call @fn for each, - * passing it @data. + * Iterate over @parent's child devices, and call @fn for each, + * passing it @data. * - * We check the return of @fn each time. If it returns anything - * other than 0, we break out and return that value. + * We check the return of @fn each time. If it returns anything + * other than 0, we break out and return that value. */ -int device_for_each_child(struct device * parent, void * data, - int (*fn)(struct device *, void *)) +int device_for_each_child(struct device *parent, void *data, + int (*fn)(struct device *dev, void *data)) { struct klist_iter i; - struct device * child; + struct device *child; int error = 0; klist_iter_init(&parent->klist_children, &i); @@ -1044,8 +1032,8 @@ int device_for_each_child(struct device * parent, void * data, * current device can be obtained, this function will return to the caller * and not iterate over any more devices. */ -struct device * device_find_child(struct device *parent, void *data, - int (*match)(struct device *, void *)) +struct device *device_find_child(struct device *parent, void *data, + int (*match)(struct device *dev, void *data)) { struct klist_iter i; struct device *child; @@ -1312,8 +1300,7 @@ static int device_move_class_links(struct device *dev, class_name); if (error) sysfs_remove_link(&dev->kobj, "device"); - } - else + } else error = 0; out: kfree(class_name); @@ -1344,7 +1331,7 @@ int device_move(struct device *dev, struct device *new_parent) return -EINVAL; new_parent = get_device(new_parent); - new_parent_kobj = get_device_parent (dev, new_parent); + new_parent_kobj = get_device_parent(dev, new_parent); pr_debug("device: '%s': %s: moving to '%s'\n", dev->bus_id, __FUNCTION__, new_parent ? new_parent->bus_id : ""); @@ -1390,7 +1377,7 @@ EXPORT_SYMBOL_GPL(device_move); */ void device_shutdown(void) { - struct device * dev, *devn; + struct device *dev, *devn; list_for_each_entry_safe_reverse(dev, devn, &devices_kset->list, kobj.entry) { diff --git a/drivers/base/dd.c b/drivers/base/dd.c index b0726eb6405e..a5cde94bb982 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -1,20 +1,20 @@ /* - * drivers/base/dd.c - The core device/driver interactions. + * drivers/base/dd.c - The core device/driver interactions. * - * This file contains the (sometimes tricky) code that controls the - * interactions between devices and drivers, which primarily includes - * driver binding and unbinding. + * This file contains the (sometimes tricky) code that controls the + * interactions between devices and drivers, which primarily includes + * driver binding and unbinding. * - * All of this code used to exist in drivers/base/bus.c, but was - * relocated to here in the name of compartmentalization (since it wasn't - * strictly code just for the 'struct bus_type'. + * All of this code used to exist in drivers/base/bus.c, but was + * relocated to here in the name of compartmentalization (since it wasn't + * strictly code just for the 'struct bus_type'. * - * Copyright (c) 2002-5 Patrick Mochel - * Copyright (c) 2002-3 Open Source Development Labs - * Copyright (c) 2007 Greg Kroah-Hartman - * Copyright (c) 2007 Novell Inc. + * Copyright (c) 2002-5 Patrick Mochel + * Copyright (c) 2002-3 Open Source Development Labs + * Copyright (c) 2007 Greg Kroah-Hartman + * Copyright (c) 2007 Novell Inc. * - * This file is released under the GPLv2 + * This file is released under the GPLv2 */ #include @@ -71,18 +71,18 @@ static void driver_sysfs_remove(struct device *dev) } /** - * device_bind_driver - bind a driver to one device. - * @dev: device. + * device_bind_driver - bind a driver to one device. + * @dev: device. * - * Allow manual attachment of a driver to a device. - * Caller must have already set @dev->driver. + * Allow manual attachment of a driver to a device. + * Caller must have already set @dev->driver. * - * Note that this does not modify the bus reference count - * nor take the bus's rwsem. Please verify those are accounted - * for before calling this. (It is ok to call with no other effort - * from a driver's probe() method.) + * Note that this does not modify the bus reference count + * nor take the bus's rwsem. Please verify those are accounted + * for before calling this. (It is ok to call with no other effort + * from a driver's probe() method.) * - * This function must be called with @dev->sem held. + * This function must be called with @dev->sem held. */ int device_bind_driver(struct device *dev) { @@ -93,6 +93,7 @@ int device_bind_driver(struct device *dev) driver_bound(dev); return ret; } +EXPORT_SYMBOL_GPL(device_bind_driver); static atomic_t probe_count = ATOMIC_INIT(0); static DECLARE_WAIT_QUEUE_HEAD(probe_waitqueue); @@ -183,7 +184,7 @@ int driver_probe_done(void) * This function must be called with @dev->sem held. When called for a * USB interface, @dev->parent->sem must be held as well. */ -int driver_probe_device(struct device_driver * drv, struct device * dev) +int driver_probe_device(struct device_driver *drv, struct device *dev) { int ret = 0; @@ -201,27 +202,27 @@ done: return ret; } -static int __device_attach(struct device_driver * drv, void * data) +static int __device_attach(struct device_driver *drv, void *data) { - struct device * dev = data; + struct device *dev = data; return driver_probe_device(drv, dev); } /** - * device_attach - try to attach device to a driver. - * @dev: device. + * device_attach - try to attach device to a driver. + * @dev: device. * - * Walk the list of drivers that the bus has and call - * driver_probe_device() for each pair. If a compatible - * pair is found, break out and return. + * Walk the list of drivers that the bus has and call + * driver_probe_device() for each pair. If a compatible + * pair is found, break out and return. * - * Returns 1 if the device was bound to a driver; - * 0 if no matching device was found; - * -ENODEV if the device is not registered. + * Returns 1 if the device was bound to a driver; + * 0 if no matching device was found; + * -ENODEV if the device is not registered. * - * When called for a USB interface, @dev->parent->sem must be held. + * When called for a USB interface, @dev->parent->sem must be held. */ -int device_attach(struct device * dev) +int device_attach(struct device *dev) { int ret = 0; @@ -240,10 +241,11 @@ int device_attach(struct device * dev) up(&dev->sem); return ret; } +EXPORT_SYMBOL_GPL(device_attach); -static int __driver_attach(struct device * dev, void * data) +static int __driver_attach(struct device *dev, void *data) { - struct device_driver * drv = data; + struct device_driver *drv = data; /* * Lock device and try to bind to it. We drop the error @@ -268,26 +270,27 @@ static int __driver_attach(struct device * dev, void * data) } /** - * driver_attach - try to bind driver to devices. - * @drv: driver. + * driver_attach - try to bind driver to devices. + * @drv: driver. * - * Walk the list of devices that the bus has on it and try to - * match the driver with each one. If driver_probe_device() - * returns 0 and the @dev->driver is set, we've found a - * compatible pair. + * Walk the list of devices that the bus has on it and try to + * match the driver with each one. If driver_probe_device() + * returns 0 and the @dev->driver is set, we've found a + * compatible pair. */ -int driver_attach(struct device_driver * drv) +int driver_attach(struct device_driver *drv) { return bus_for_each_dev(drv->bus, NULL, drv, __driver_attach); } +EXPORT_SYMBOL_GPL(driver_attach); /* - * __device_release_driver() must be called with @dev->sem held. - * When called for a USB interface, @dev->parent->sem must be held as well. + * __device_release_driver() must be called with @dev->sem held. + * When called for a USB interface, @dev->parent->sem must be held as well. */ -static void __device_release_driver(struct device * dev) +static void __device_release_driver(struct device *dev) { - struct device_driver * drv; + struct device_driver *drv; drv = dev->driver; if (drv) { @@ -310,13 +313,13 @@ static void __device_release_driver(struct device * dev) } /** - * device_release_driver - manually detach device from driver. - * @dev: device. + * device_release_driver - manually detach device from driver. + * @dev: device. * - * Manually detach device from driver. - * When called for a USB interface, @dev->parent->sem must be held. + * Manually detach device from driver. + * When called for a USB interface, @dev->parent->sem must be held. */ -void device_release_driver(struct device * dev) +void device_release_driver(struct device *dev) { /* * If anyone calls device_release_driver() recursively from @@ -327,15 +330,15 @@ void device_release_driver(struct device * dev) __device_release_driver(dev); up(&dev->sem); } - +EXPORT_SYMBOL_GPL(device_release_driver); /** * driver_detach - detach driver from all devices it controls. * @drv: driver. */ -void driver_detach(struct device_driver * drv) +void driver_detach(struct device_driver *drv) { - struct device * dev; + struct device *dev; for (;;) { spin_lock(&drv->p->klist_devices.k_lock); @@ -359,9 +362,3 @@ void driver_detach(struct device_driver * drv) put_device(dev); } } - -EXPORT_SYMBOL_GPL(device_bind_driver); -EXPORT_SYMBOL_GPL(device_release_driver); -EXPORT_SYMBOL_GPL(device_attach); -EXPORT_SYMBOL_GPL(driver_attach); - diff --git a/drivers/base/driver.c b/drivers/base/driver.c index 94b697a9b4e0..a35f04121a00 100644 --- a/drivers/base/driver.c +++ b/drivers/base/driver.c @@ -19,27 +19,26 @@ #define to_dev(node) container_of(node, struct device, driver_list) -static struct device * next_device(struct klist_iter * i) +static struct device *next_device(struct klist_iter *i) { - struct klist_node * n = klist_next(i); + struct klist_node *n = klist_next(i); return n ? container_of(n, struct device, knode_driver) : NULL; } /** - * driver_for_each_device - Iterator for devices bound to a driver. - * @drv: Driver we're iterating. - * @start: Device to begin with - * @data: Data to pass to the callback. - * @fn: Function to call for each device. + * driver_for_each_device - Iterator for devices bound to a driver. + * @drv: Driver we're iterating. + * @start: Device to begin with + * @data: Data to pass to the callback. + * @fn: Function to call for each device. * - * Iterate over the @drv's list of devices calling @fn for each one. + * Iterate over the @drv's list of devices calling @fn for each one. */ - -int driver_for_each_device(struct device_driver * drv, struct device * start, - void * data, int (*fn)(struct device *, void *)) +int driver_for_each_device(struct device_driver *drv, struct device *start, + void *data, int (*fn)(struct device *, void *)) { struct klist_iter i; - struct device * dev; + struct device *dev; int error = 0; if (!drv) @@ -52,10 +51,8 @@ int driver_for_each_device(struct device_driver * drv, struct device * start, klist_iter_exit(&i); return error; } - EXPORT_SYMBOL_GPL(driver_for_each_device); - /** * driver_find_device - device iterator for locating a particular device. * @drv: The device's driver @@ -71,9 +68,9 @@ EXPORT_SYMBOL_GPL(driver_for_each_device); * if it does. If the callback returns non-zero, this function will * return to the caller and not iterate over any more devices. */ -struct device * driver_find_device(struct device_driver *drv, - struct device * start, void * data, - int (*match)(struct device *, void *)) +struct device *driver_find_device(struct device_driver *drv, + struct device *start, void *data, + int (*match)(struct device *dev, void *data)) { struct klist_iter i; struct device *dev; @@ -92,12 +89,12 @@ struct device * driver_find_device(struct device_driver *drv, EXPORT_SYMBOL_GPL(driver_find_device); /** - * driver_create_file - create sysfs file for driver. - * @drv: driver. - * @attr: driver attribute descriptor. + * driver_create_file - create sysfs file for driver. + * @drv: driver. + * @attr: driver attribute descriptor. */ - -int driver_create_file(struct device_driver * drv, struct driver_attribute * attr) +int driver_create_file(struct device_driver *drv, + struct driver_attribute *attr) { int error; if (get_driver(drv)) { @@ -107,22 +104,22 @@ int driver_create_file(struct device_driver * drv, struct driver_attribute * att error = -EINVAL; return error; } - +EXPORT_SYMBOL_GPL(driver_create_file); /** - * driver_remove_file - remove sysfs file for driver. - * @drv: driver. - * @attr: driver attribute descriptor. + * driver_remove_file - remove sysfs file for driver. + * @drv: driver. + * @attr: driver attribute descriptor. */ - -void driver_remove_file(struct device_driver * drv, struct driver_attribute * attr) +void driver_remove_file(struct device_driver *drv, + struct driver_attribute *attr) { if (get_driver(drv)) { sysfs_remove_file(&drv->p->kobj, &attr->attr); put_driver(drv); } } - +EXPORT_SYMBOL_GPL(driver_remove_file); /** * driver_add_kobj - add a kobject below the specified driver @@ -149,10 +146,10 @@ int driver_add_kobj(struct device_driver *drv, struct kobject *kobj, EXPORT_SYMBOL_GPL(driver_add_kobj); /** - * get_driver - increment driver reference count. - * @drv: driver. + * get_driver - increment driver reference count. + * @drv: driver. */ -struct device_driver * get_driver(struct device_driver * drv) +struct device_driver *get_driver(struct device_driver *drv) { if (drv) { struct driver_private *priv; @@ -164,16 +161,17 @@ struct device_driver * get_driver(struct device_driver * drv) } return NULL; } - +EXPORT_SYMBOL_GPL(get_driver); /** - * put_driver - decrement driver's refcount. - * @drv: driver. + * put_driver - decrement driver's refcount. + * @drv: driver. */ -void put_driver(struct device_driver * drv) +void put_driver(struct device_driver *drv) { kobject_put(&drv->p->kobj); } +EXPORT_SYMBOL_GPL(put_driver); static int driver_add_groups(struct device_driver *drv, struct attribute_group **groups) @@ -205,24 +203,23 @@ static void driver_remove_groups(struct device_driver *drv, sysfs_remove_group(&drv->p->kobj, groups[i]); } - /** - * driver_register - register driver with bus - * @drv: driver to register + * driver_register - register driver with bus + * @drv: driver to register * - * We pass off most of the work to the bus_add_driver() call, - * since most of the things we have to do deal with the bus - * structures. + * We pass off most of the work to the bus_add_driver() call, + * since most of the things we have to do deal with the bus + * structures. */ -int driver_register(struct device_driver * drv) +int driver_register(struct device_driver *drv) { int ret; if ((drv->bus->probe && drv->probe) || (drv->bus->remove && drv->remove) || - (drv->bus->shutdown && drv->shutdown)) { - printk(KERN_WARNING "Driver '%s' needs updating - please use bus_type methods\n", drv->name); - } + (drv->bus->shutdown && drv->shutdown)) + printk(KERN_WARNING "Driver '%s' needs updating - please use " + "bus_type methods\n", drv->name); ret = bus_add_driver(drv); if (ret) return ret; @@ -231,29 +228,30 @@ int driver_register(struct device_driver * drv) bus_remove_driver(drv); return ret; } +EXPORT_SYMBOL_GPL(driver_register); /** - * driver_unregister - remove driver from system. - * @drv: driver. + * driver_unregister - remove driver from system. + * @drv: driver. * - * Again, we pass off most of the work to the bus-level call. + * Again, we pass off most of the work to the bus-level call. */ - -void driver_unregister(struct device_driver * drv) +void driver_unregister(struct device_driver *drv) { driver_remove_groups(drv, drv->groups); bus_remove_driver(drv); } +EXPORT_SYMBOL_GPL(driver_unregister); /** - * driver_find - locate driver on a bus by its name. - * @name: name of the driver. - * @bus: bus to scan for the driver. + * driver_find - locate driver on a bus by its name. + * @name: name of the driver. + * @bus: bus to scan for the driver. * - * Call kset_find_obj() to iterate over list of drivers on - * a bus to find driver by name. Return driver if found. + * Call kset_find_obj() to iterate over list of drivers on + * a bus to find driver by name. Return driver if found. * - * Note that kset_find_obj increments driver's reference count. + * Note that kset_find_obj increments driver's reference count. */ struct device_driver *driver_find(const char *name, struct bus_type *bus) { @@ -266,12 +264,4 @@ struct device_driver *driver_find(const char *name, struct bus_type *bus) } return NULL; } - -EXPORT_SYMBOL_GPL(driver_register); -EXPORT_SYMBOL_GPL(driver_unregister); -EXPORT_SYMBOL_GPL(get_driver); -EXPORT_SYMBOL_GPL(put_driver); EXPORT_SYMBOL_GPL(driver_find); - -EXPORT_SYMBOL_GPL(driver_create_file); -EXPORT_SYMBOL_GPL(driver_remove_file); diff --git a/drivers/base/init.c b/drivers/base/init.c index 1da88a10cfec..7bd9b6a5b01f 100644 --- a/drivers/base/init.c +++ b/drivers/base/init.c @@ -1,10 +1,8 @@ /* - * * Copyright (c) 2002-3 Patrick Mochel * Copyright (c) 2002-3 Open Source Development Labs * * This file is released under the GPLv2 - * */ #include @@ -14,12 +12,11 @@ #include "base.h" /** - * driver_init - initialize driver model. + * driver_init - initialize driver model. * - * Call the driver model init functions to initialize their - * subsystems. Called early from init/main.c. + * Call the driver model init functions to initialize their + * subsystems. Called early from init/main.c. */ - void __init driver_init(void) { /* These are the core pieces */ diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 48d5db4f92ee..efaf282c438c 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -20,7 +20,8 @@ #include "base.h" -#define to_platform_driver(drv) (container_of((drv), struct platform_driver, driver)) +#define to_platform_driver(drv) (container_of((drv), struct platform_driver, \ + driver)) struct device platform_bus = { .bus_id = "platform", @@ -28,14 +29,13 @@ struct device platform_bus = { EXPORT_SYMBOL_GPL(platform_bus); /** - * platform_get_resource - get a resource for a device - * @dev: platform device - * @type: resource type - * @num: resource index + * platform_get_resource - get a resource for a device + * @dev: platform device + * @type: resource type + * @num: resource index */ -struct resource * -platform_get_resource(struct platform_device *dev, unsigned int type, - unsigned int num) +struct resource *platform_get_resource(struct platform_device *dev, + unsigned int type, unsigned int num) { int i; @@ -43,8 +43,7 @@ platform_get_resource(struct platform_device *dev, unsigned int type, struct resource *r = &dev->resource[i]; if ((r->flags & (IORESOURCE_IO|IORESOURCE_MEM| - IORESOURCE_IRQ|IORESOURCE_DMA)) - == type) + IORESOURCE_IRQ|IORESOURCE_DMA)) == type) if (num-- == 0) return r; } @@ -53,9 +52,9 @@ platform_get_resource(struct platform_device *dev, unsigned int type, EXPORT_SYMBOL_GPL(platform_get_resource); /** - * platform_get_irq - get an IRQ for a device - * @dev: platform device - * @num: IRQ number index + * platform_get_irq - get an IRQ for a device + * @dev: platform device + * @num: IRQ number index */ int platform_get_irq(struct platform_device *dev, unsigned int num) { @@ -66,14 +65,13 @@ int platform_get_irq(struct platform_device *dev, unsigned int num) EXPORT_SYMBOL_GPL(platform_get_irq); /** - * platform_get_resource_byname - get a resource for a device by name - * @dev: platform device - * @type: resource type - * @name: resource name + * platform_get_resource_byname - get a resource for a device by name + * @dev: platform device + * @type: resource type + * @name: resource name */ -struct resource * -platform_get_resource_byname(struct platform_device *dev, unsigned int type, - char *name) +struct resource *platform_get_resource_byname(struct platform_device *dev, + unsigned int type, char *name) { int i; @@ -90,22 +88,23 @@ platform_get_resource_byname(struct platform_device *dev, unsigned int type, EXPORT_SYMBOL_GPL(platform_get_resource_byname); /** - * platform_get_irq - get an IRQ for a device - * @dev: platform device - * @name: IRQ name + * platform_get_irq - get an IRQ for a device + * @dev: platform device + * @name: IRQ name */ int platform_get_irq_byname(struct platform_device *dev, char *name) { - struct resource *r = platform_get_resource_byname(dev, IORESOURCE_IRQ, name); + struct resource *r = platform_get_resource_byname(dev, IORESOURCE_IRQ, + name); return r ? r->start : -ENXIO; } EXPORT_SYMBOL_GPL(platform_get_irq_byname); /** - * platform_add_devices - add a numbers of platform devices - * @devs: array of platform devices to add - * @num: number of platform devices in array + * platform_add_devices - add a numbers of platform devices + * @devs: array of platform devices to add + * @num: number of platform devices in array */ int platform_add_devices(struct platform_device **devs, int num) { @@ -130,12 +129,11 @@ struct platform_object { }; /** - * platform_device_put - * @pdev: platform device to free + * platform_device_put + * @pdev: platform device to free * - * Free all memory associated with a platform device. This function - * must _only_ be externally called in error cases. All other usage - * is a bug. + * Free all memory associated with a platform device. This function must + * _only_ be externally called in error cases. All other usage is a bug. */ void platform_device_put(struct platform_device *pdev) { @@ -146,7 +144,8 @@ EXPORT_SYMBOL_GPL(platform_device_put); static void platform_device_release(struct device *dev) { - struct platform_object *pa = container_of(dev, struct platform_object, pdev.dev); + struct platform_object *pa = container_of(dev, struct platform_object, + pdev.dev); kfree(pa->pdev.dev.platform_data); kfree(pa->pdev.resource); @@ -154,12 +153,12 @@ static void platform_device_release(struct device *dev) } /** - * platform_device_alloc - * @name: base name of the device we're adding - * @id: instance id + * platform_device_alloc + * @name: base name of the device we're adding + * @id: instance id * - * Create a platform device object which can have other objects attached - * to it, and which will have attached objects freed when it is released. + * Create a platform device object which can have other objects attached + * to it, and which will have attached objects freed when it is released. */ struct platform_device *platform_device_alloc(const char *name, int id) { @@ -179,16 +178,17 @@ struct platform_device *platform_device_alloc(const char *name, int id) EXPORT_SYMBOL_GPL(platform_device_alloc); /** - * platform_device_add_resources - * @pdev: platform device allocated by platform_device_alloc to add resources to - * @res: set of resources that needs to be allocated for the device - * @num: number of resources + * platform_device_add_resources + * @pdev: platform device allocated by platform_device_alloc to add resources to + * @res: set of resources that needs to be allocated for the device + * @num: number of resources * - * Add a copy of the resources to the platform device. The memory - * associated with the resources will be freed when the platform - * device is released. + * Add a copy of the resources to the platform device. The memory + * associated with the resources will be freed when the platform device is + * released. */ -int platform_device_add_resources(struct platform_device *pdev, struct resource *res, unsigned int num) +int platform_device_add_resources(struct platform_device *pdev, + struct resource *res, unsigned int num) { struct resource *r; @@ -203,16 +203,17 @@ int platform_device_add_resources(struct platform_device *pdev, struct resource EXPORT_SYMBOL_GPL(platform_device_add_resources); /** - * platform_device_add_data - * @pdev: platform device allocated by platform_device_alloc to add resources to - * @data: platform specific data for this platform device - * @size: size of platform specific data + * platform_device_add_data + * @pdev: platform device allocated by platform_device_alloc to add resources to + * @data: platform specific data for this platform device + * @size: size of platform specific data * - * Add a copy of platform specific data to the platform device's platform_data - * pointer. The memory associated with the platform data will be freed - * when the platform device is released. + * Add a copy of platform specific data to the platform device's + * platform_data pointer. The memory associated with the platform data + * will be freed when the platform device is released. */ -int platform_device_add_data(struct platform_device *pdev, const void *data, size_t size) +int platform_device_add_data(struct platform_device *pdev, const void *data, + size_t size) { void *d; @@ -226,11 +227,11 @@ int platform_device_add_data(struct platform_device *pdev, const void *data, siz EXPORT_SYMBOL_GPL(platform_device_add_data); /** - * platform_device_add - add a platform device to device hierarchy - * @pdev: platform device we're adding + * platform_device_add - add a platform device to device hierarchy + * @pdev: platform device we're adding * - * This is part 2 of platform_device_register(), though may be called - * separately _iff_ pdev was allocated by platform_device_alloc(). + * This is part 2 of platform_device_register(), though may be called + * separately _iff_ pdev was allocated by platform_device_alloc(). */ int platform_device_add(struct platform_device *pdev) { @@ -289,13 +290,12 @@ int platform_device_add(struct platform_device *pdev) EXPORT_SYMBOL_GPL(platform_device_add); /** - * platform_device_del - remove a platform-level device - * @pdev: platform device we're removing + * platform_device_del - remove a platform-level device + * @pdev: platform device we're removing * - * Note that this function will also release all memory- and port-based - * resources owned by the device (@dev->resource). This function - * must _only_ be externally called in error cases. All other usage - * is a bug. + * Note that this function will also release all memory- and port-based + * resources owned by the device (@dev->resource). This function must + * _only_ be externally called in error cases. All other usage is a bug. */ void platform_device_del(struct platform_device *pdev) { @@ -314,11 +314,10 @@ void platform_device_del(struct platform_device *pdev) EXPORT_SYMBOL_GPL(platform_device_del); /** - * platform_device_register - add a platform-level device - * @pdev: platform device we're adding - * + * platform_device_register - add a platform-level device + * @pdev: platform device we're adding */ -int platform_device_register(struct platform_device * pdev) +int platform_device_register(struct platform_device *pdev) { device_initialize(&pdev->dev); return platform_device_add(pdev); @@ -326,14 +325,14 @@ int platform_device_register(struct platform_device * pdev) EXPORT_SYMBOL_GPL(platform_device_register); /** - * platform_device_unregister - unregister a platform-level device - * @pdev: platform device we're unregistering + * platform_device_unregister - unregister a platform-level device + * @pdev: platform device we're unregistering * - * Unregistration is done in 2 steps. First we release all resources - * and remove it from the subsystem, then we drop reference count by - * calling platform_device_put(). + * Unregistration is done in 2 steps. First we release all resources + * and remove it from the subsystem, then we drop reference count by + * calling platform_device_put(). */ -void platform_device_unregister(struct platform_device * pdev) +void platform_device_unregister(struct platform_device *pdev) { platform_device_del(pdev); platform_device_put(pdev); @@ -341,27 +340,29 @@ void platform_device_unregister(struct platform_device * pdev) EXPORT_SYMBOL_GPL(platform_device_unregister); /** - * platform_device_register_simple - * @name: base name of the device we're adding - * @id: instance id - * @res: set of resources that needs to be allocated for the device - * @num: number of resources + * platform_device_register_simple + * @name: base name of the device we're adding + * @id: instance id + * @res: set of resources that needs to be allocated for the device + * @num: number of resources * - * This function creates a simple platform device that requires minimal - * resource and memory management. Canned release function freeing - * memory allocated for the device allows drivers using such devices - * to be unloaded without waiting for the last reference to the device - * to be dropped. + * This function creates a simple platform device that requires minimal + * resource and memory management. Canned release function freeing memory + * allocated for the device allows drivers using such devices to be + * unloaded without waiting for the last reference to the device to be + * dropped. * - * This interface is primarily intended for use with legacy drivers - * which probe hardware directly. Because such drivers create sysfs - * device nodes themselves, rather than letting system infrastructure - * handle such device enumeration tasks, they don't fully conform to - * the Linux driver model. In particular, when such drivers are built - * as modules, they can't be "hotplugged". + * This interface is primarily intended for use with legacy drivers which + * probe hardware directly. Because such drivers create sysfs device nodes + * themselves, rather than letting system infrastructure handle such device + * enumeration tasks, they don't fully conform to the Linux driver model. + * In particular, when such drivers are built as modules, they can't be + * "hotplugged". */ -struct platform_device *platform_device_register_simple(const char *name, int id, - struct resource *res, unsigned int num) +struct platform_device *platform_device_register_simple(const char *name, + int id, + struct resource *res, + unsigned int num) { struct platform_device *pdev; int retval; @@ -436,8 +437,8 @@ static int platform_drv_resume(struct device *_dev) } /** - * platform_driver_register - * @drv: platform driver structure + * platform_driver_register + * @drv: platform driver structure */ int platform_driver_register(struct platform_driver *drv) { @@ -457,8 +458,8 @@ int platform_driver_register(struct platform_driver *drv) EXPORT_SYMBOL_GPL(platform_driver_register); /** - * platform_driver_unregister - * @drv: platform driver structure + * platform_driver_unregister + * @drv: platform driver structure */ void platform_driver_unregister(struct platform_driver *drv) { @@ -516,8 +517,8 @@ EXPORT_SYMBOL_GPL(platform_driver_probe); * (b) sysfs attribute lets new-style coldplug recover from hotplug events * mishandled before system is fully running: "modprobe $(cat modalias)" */ -static ssize_t -modalias_show(struct device *dev, struct device_attribute *a, char *buf) +static ssize_t modalias_show(struct device *dev, struct device_attribute *a, + char *buf) { struct platform_device *pdev = to_platform_device(dev); int len = snprintf(buf, PAGE_SIZE, "platform:%s\n", pdev->name); @@ -538,26 +539,24 @@ static int platform_uevent(struct device *dev, struct kobj_uevent_env *env) return 0; } - /** - * platform_match - bind platform device to platform driver. - * @dev: device. - * @drv: driver. + * platform_match - bind platform device to platform driver. + * @dev: device. + * @drv: driver. * - * Platform device IDs are assumed to be encoded like this: - * "", where is a short description of the - * type of device, like "pci" or "floppy", and is the - * enumerated instance of the device, like '0' or '42'. - * Driver IDs are simply "". - * So, extract the from the platform_device structure, - * and compare it against the name of the driver. Return whether - * they match or not. + * Platform device IDs are assumed to be encoded like this: + * "", where is a short description of the type of + * device, like "pci" or "floppy", and is the enumerated + * instance of the device, like '0' or '42'. Driver IDs are simply + * "". So, extract the from the platform_device structure, + * and compare it against the name of the driver. Return whether they match + * or not. */ - -static int platform_match(struct device * dev, struct device_driver * drv) +static int platform_match(struct device *dev, struct device_driver *drv) { - struct platform_device *pdev = container_of(dev, struct platform_device, dev); + struct platform_device *pdev; + pdev = container_of(dev, struct platform_device, dev); return (strncmp(pdev->name, drv->name, BUS_ID_SIZE) == 0); } @@ -574,9 +573,10 @@ static int platform_suspend(struct device *dev, pm_message_t mesg) static int platform_suspend_late(struct device *dev, pm_message_t mesg) { struct platform_driver *drv = to_platform_driver(dev->driver); - struct platform_device *pdev = container_of(dev, struct platform_device, dev); + struct platform_device *pdev; int ret = 0; + pdev = container_of(dev, struct platform_device, dev); if (dev->driver && drv->suspend_late) ret = drv->suspend_late(pdev, mesg); @@ -586,16 +586,17 @@ static int platform_suspend_late(struct device *dev, pm_message_t mesg) static int platform_resume_early(struct device *dev) { struct platform_driver *drv = to_platform_driver(dev->driver); - struct platform_device *pdev = container_of(dev, struct platform_device, dev); + struct platform_device *pdev; int ret = 0; + pdev = container_of(dev, struct platform_device, dev); if (dev->driver && drv->resume_early) ret = drv->resume_early(pdev); return ret; } -static int platform_resume(struct device * dev) +static int platform_resume(struct device *dev) { int ret = 0; -- cgit v1.2.3-59-g8ed1b From 3611553ef985ef7c5863c8a94641738addd04cff Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Thu, 5 Jul 2007 17:08:09 +0200 Subject: [AVR32] Drop GFP_COMP for DMA memory allocations dma_alloc_coherent wants to split pages after allocation in order to reduce the memory footprint. This does not work well with GFP_COMP pages, so drop this flag before allocation. This patch was forward-ported from BSP 2.0 Signed-off-by: Haavard Skinnemoen --- arch/avr32/mm/dma-coherent.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/avr32/mm/dma-coherent.c b/arch/avr32/mm/dma-coherent.c index 177fea8f7b71..6d8c794c3b81 100644 --- a/arch/avr32/mm/dma-coherent.c +++ b/arch/avr32/mm/dma-coherent.c @@ -41,6 +41,13 @@ static struct page *__dma_alloc(struct device *dev, size_t size, struct page *page, *free, *end; int order; + /* Following is a work-around (a.k.a. hack) to prevent pages + * with __GFP_COMP being passed to split_page() which cannot + * handle them. The real problem is that this flag probably + * should be 0 on AVR32 as it is not supported on this + * platform--see CONFIG_HUGETLB_PAGE. */ + gfp &= ~(__GFP_COMP); + size = PAGE_ALIGN(size); order = get_order(size); -- cgit v1.2.3-59-g8ed1b From 7f0f616bb093823b70855685cf085d39a8784818 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Wed, 28 Nov 2007 14:51:44 +0100 Subject: [AVR32] Remove redundant try_to_freeze() call from do_signal() get_signal_to_deliver() will call try_to_freeze(), so there's no point in do_signal() doing it as well. Signed-off-by: Haavard Skinnemoen --- arch/avr32/kernel/signal.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/arch/avr32/kernel/signal.c b/arch/avr32/kernel/signal.c index 0ec14854a200..5616a00c10ba 100644 --- a/arch/avr32/kernel/signal.c +++ b/arch/avr32/kernel/signal.c @@ -270,19 +270,12 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset, int syscall) if (!user_mode(regs)) return 0; - if (try_to_freeze()) { - signr = 0; - if (!signal_pending(current)) - goto no_signal; - } - if (test_thread_flag(TIF_RESTORE_SIGMASK)) oldset = ¤t->saved_sigmask; else if (!oldset) oldset = ¤t->blocked; signr = get_signal_to_deliver(&info, &ka, regs, NULL); -no_signal: if (syscall) { switch (regs->r12) { case -ERESTART_RESTARTBLOCK: -- cgit v1.2.3-59-g8ed1b From 6ea6dd93c9454cc9521134f907bc970d09f460e4 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Tue, 27 Nov 2007 13:02:40 +0100 Subject: ptrace: Call arch_ptrace_attach() when request=PTRACE_TRACEME arch_ptrace_attach() is a hook that allows the architecture to do book-keeping after a ptrace attach. This patch adds a call to this hook when handling a PTRACE_TRACEME request as well. Currently only one architecture, m32r, implements this hook. When called, it initializes a number of debug trap slots in the ptraced task's thread struct, and it looks to me like this is the right thing to do after a PTRACE_TRACEME request as well, not only after PTRACE_ATTACH. Please correct me if I'm wrong. I want to use this hook on AVR32 to turn the debugging hardware on when a process is actually being debugged and keep it off otherwise. To be able to do this, I need to intercept PTRACE_TRACEME and PTRACE_ATTACH, as well as PTRACE_DETACH and thread exit. The latter two can be handled by existing hooks. Signed-off-by: Haavard Skinnemoen --- kernel/ptrace.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/ptrace.c b/kernel/ptrace.c index c25db863081d..c719bb9d79ab 100644 --- a/kernel/ptrace.c +++ b/kernel/ptrace.c @@ -470,6 +470,8 @@ asmlinkage long sys_ptrace(long request, long pid, long addr, long data) lock_kernel(); if (request == PTRACE_TRACEME) { ret = ptrace_traceme(); + if (!ret) + arch_ptrace_attach(current); goto out; } -- cgit v1.2.3-59-g8ed1b From 13b54a50525a9685065684e1e11258d27dd27bdf Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Tue, 27 Nov 2007 13:50:45 +0100 Subject: [AVR32] Enable debugging only when needed Keep track of processes being debugged (including the kernel itself) and turn the OCD system on and off as appropriate. Since enabling debugging turns off some optimizations in the CPU core, this fixes the issue that enabling KProbes support or simply running a program under gdbserver will reduce system performance significantly until the next reboot. The CPU performance will still be reduced for all processes while a process is being debugged, but this is a lot better than reducing the performance forever. Signed-off-by: Haavard Skinnemoen --- arch/avr32/kernel/Makefile | 2 +- arch/avr32/kernel/kprobes.c | 5 +- arch/avr32/kernel/ocd.c | 163 ++++++++++++++++++++++++++++++++++++++++ arch/avr32/kernel/process.c | 5 +- arch/avr32/kernel/ptrace.c | 5 +- include/asm-avr32/ocd.h | 5 ++ include/asm-avr32/ptrace.h | 13 +++- include/asm-avr32/thread_info.h | 1 + 8 files changed, 186 insertions(+), 13 deletions(-) create mode 100644 arch/avr32/kernel/ocd.c diff --git a/arch/avr32/kernel/Makefile b/arch/avr32/kernel/Makefile index 2d6d48f35f69..bc224a4e39fe 100644 --- a/arch/avr32/kernel/Makefile +++ b/arch/avr32/kernel/Makefile @@ -6,7 +6,7 @@ extra-y := head.o vmlinux.lds obj-$(CONFIG_SUBARCH_AVR32B) += entry-avr32b.o obj-y += syscall_table.o syscall-stubs.o irq.o -obj-y += setup.o traps.o semaphore.o ptrace.o +obj-y += setup.o traps.o semaphore.o ocd.o ptrace.o obj-y += signal.o sys_avr32.o process.o time.o obj-y += init_task.o switch_to.o cpu.o obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o diff --git a/arch/avr32/kernel/kprobes.c b/arch/avr32/kernel/kprobes.c index 799ba89b07a8..f820e9f25520 100644 --- a/arch/avr32/kernel/kprobes.c +++ b/arch/avr32/kernel/kprobes.c @@ -48,6 +48,7 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) void __kprobes arch_arm_kprobe(struct kprobe *p) { pr_debug("arming kprobe at %p\n", p->addr); + ocd_enable(NULL); *p->addr = BREAKPOINT_INSTRUCTION; flush_icache_range((unsigned long)p->addr, (unsigned long)p->addr + sizeof(kprobe_opcode_t)); @@ -56,6 +57,7 @@ void __kprobes arch_arm_kprobe(struct kprobe *p) void __kprobes arch_disarm_kprobe(struct kprobe *p) { pr_debug("disarming kprobe at %p\n", p->addr); + ocd_disable(NULL); *p->addr = p->opcode; flush_icache_range((unsigned long)p->addr, (unsigned long)p->addr + sizeof(kprobe_opcode_t)); @@ -260,9 +262,6 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) int __init arch_init_kprobes(void) { - printk("KPROBES: Enabling monitor mode (MM|DBE)...\n"); - ocd_write(DC, (1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT)); - /* TODO: Register kretprobe trampoline */ return 0; } diff --git a/arch/avr32/kernel/ocd.c b/arch/avr32/kernel/ocd.c new file mode 100644 index 000000000000..c4f023294d75 --- /dev/null +++ b/arch/avr32/kernel/ocd.c @@ -0,0 +1,163 @@ +/* + * Copyright (C) 2007 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include + +#include + +static long ocd_count; +static spinlock_t ocd_lock; + +/** + * ocd_enable - enable on-chip debugging + * @child: task to be debugged + * + * If @child is non-NULL, ocd_enable() first checks if debugging has + * already been enabled for @child, and if it has, does nothing. + * + * If @child is NULL (e.g. when debugging the kernel), or debugging + * has not already been enabled for it, ocd_enable() increments the + * reference count and enables the debugging hardware. + */ +void ocd_enable(struct task_struct *child) +{ + u32 dc; + + if (child) + pr_debug("ocd_enable: child=%s [%u]\n", + child->comm, child->pid); + else + pr_debug("ocd_enable (no child)\n"); + + if (!child || !test_and_set_tsk_thread_flag(child, TIF_DEBUG)) { + spin_lock(&ocd_lock); + ocd_count++; + dc = ocd_read(DC); + dc |= (1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT); + ocd_write(DC, dc); + spin_unlock(&ocd_lock); + } +} + +/** + * ocd_disable - disable on-chip debugging + * @child: task that was being debugged, but isn't anymore + * + * If @child is non-NULL, ocd_disable() checks if debugging is enabled + * for @child, and if it isn't, does nothing. + * + * If @child is NULL (e.g. when debugging the kernel), or debugging is + * enabled, ocd_disable() decrements the reference count, and if it + * reaches zero, disables the debugging hardware. + */ +void ocd_disable(struct task_struct *child) +{ + u32 dc; + + if (!child) + pr_debug("ocd_disable (no child)\n"); + else if (test_tsk_thread_flag(child, TIF_DEBUG)) + pr_debug("ocd_disable: child=%s [%u]\n", + child->comm, child->pid); + + if (!child || test_and_clear_tsk_thread_flag(child, TIF_DEBUG)) { + spin_lock(&ocd_lock); + ocd_count--; + + WARN_ON(ocd_count < 0); + + if (ocd_count <= 0) { + dc = ocd_read(DC); + dc &= ~((1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT)); + ocd_write(DC, dc); + } + spin_unlock(&ocd_lock); + } +} + +#ifdef CONFIG_DEBUG_FS +#include +#include + +static struct dentry *ocd_debugfs_root; +static struct dentry *ocd_debugfs_DC; +static struct dentry *ocd_debugfs_DS; +static struct dentry *ocd_debugfs_count; + +static u64 ocd_DC_get(void *data) +{ + return ocd_read(DC); +} +static void ocd_DC_set(void *data, u64 val) +{ + ocd_write(DC, val); +} +DEFINE_SIMPLE_ATTRIBUTE(fops_DC, ocd_DC_get, ocd_DC_set, "0x%08llx\n"); + +static u64 ocd_DS_get(void *data) +{ + return ocd_read(DS); +} +DEFINE_SIMPLE_ATTRIBUTE(fops_DS, ocd_DS_get, NULL, "0x%08llx\n"); + +static u64 ocd_count_get(void *data) +{ + return ocd_count; +} +DEFINE_SIMPLE_ATTRIBUTE(fops_count, ocd_count_get, NULL, "%lld\n"); + +static void ocd_debugfs_init(void) +{ + struct dentry *root; + + root = debugfs_create_dir("ocd", NULL); + if (IS_ERR(root) || !root) + goto err_root; + ocd_debugfs_root = root; + + ocd_debugfs_DC = debugfs_create_file("DC", S_IRUSR | S_IWUSR, + root, NULL, &fops_DC); + if (!ocd_debugfs_DC) + goto err_DC; + + ocd_debugfs_DS = debugfs_create_file("DS", S_IRUSR, root, + NULL, &fops_DS); + if (!ocd_debugfs_DS) + goto err_DS; + + ocd_debugfs_count = debugfs_create_file("count", S_IRUSR, root, + NULL, &fops_count); + if (!ocd_debugfs_count) + goto err_count; + + return; + +err_count: + debugfs_remove(ocd_debugfs_DS); +err_DS: + debugfs_remove(ocd_debugfs_DC); +err_DC: + debugfs_remove(ocd_debugfs_root); +err_root: + printk(KERN_WARNING "OCD: Failed to create debugfs entries\n"); +} +#else +static inline void ocd_debugfs_init(void) +{ + +} +#endif + +static int __init ocd_init(void) +{ + spin_lock_init(&ocd_lock); + ocd_debugfs_init(); + return 0; +} +arch_initcall(ocd_init); diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c index 9d6dac8af7a2..eaaa69bbdc38 100644 --- a/arch/avr32/kernel/process.c +++ b/arch/avr32/kernel/process.c @@ -103,7 +103,7 @@ EXPORT_SYMBOL(kernel_thread); */ void exit_thread(void) { - /* nothing to do */ + ocd_disable(current); } void flush_thread(void) @@ -345,6 +345,9 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, p->thread.cpu_context.ksp = (unsigned long)childregs; p->thread.cpu_context.pc = (unsigned long)ret_from_fork; + if ((clone_flags & CLONE_PTRACE) && test_thread_flag(TIF_DEBUG)) + ocd_enable(p); + return 0; } diff --git a/arch/avr32/kernel/ptrace.c b/arch/avr32/kernel/ptrace.c index 002369e44093..1fed38fcf594 100644 --- a/arch/avr32/kernel/ptrace.c +++ b/arch/avr32/kernel/ptrace.c @@ -58,6 +58,7 @@ void ptrace_disable(struct task_struct *child) { clear_tsk_thread_flag(child, TIF_SINGLE_STEP); clear_tsk_thread_flag(child, TIF_BREAKPOINT); + ocd_disable(child); } /* @@ -144,10 +145,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) { int ret; - pr_debug("ptrace: Enabling monitor mode...\n"); - ocd_write(DC, ocd_read(DC) | (1 << OCD_DC_MM_BIT) - | (1 << OCD_DC_DBE_BIT)); - switch (request) { /* Read the word at location addr in the child process */ case PTRACE_PEEKTEXT: diff --git a/include/asm-avr32/ocd.h b/include/asm-avr32/ocd.h index 996405e0393f..6bef09490235 100644 --- a/include/asm-avr32/ocd.h +++ b/include/asm-avr32/ocd.h @@ -533,6 +533,11 @@ static inline void __ocd_write(unsigned int reg, unsigned long value) #define ocd_read(reg) __ocd_read(OCD_##reg) #define ocd_write(reg, value) __ocd_write(OCD_##reg, value) +struct task_struct; + +void ocd_enable(struct task_struct *child); +void ocd_disable(struct task_struct *child); + #endif /* !__ASSEMBLER__ */ #endif /* __ASM_AVR32_OCD_H */ diff --git a/include/asm-avr32/ptrace.h b/include/asm-avr32/ptrace.h index 8c5dba5e33df..9e2d44f4e0fe 100644 --- a/include/asm-avr32/ptrace.h +++ b/include/asm-avr32/ptrace.h @@ -121,7 +121,15 @@ struct pt_regs { }; #ifdef __KERNEL__ -# define user_mode(regs) (((regs)->sr & MODE_MASK) == MODE_USER) + +#include + +#define arch_ptrace_attach(child) ocd_enable(child) + +#define user_mode(regs) (((regs)->sr & MODE_MASK) == MODE_USER) +#define instruction_pointer(regs) ((regs)->pc) +#define profile_pc(regs) instruction_pointer(regs) + extern void show_regs (struct pt_regs *); static __inline__ int valid_user_regs(struct pt_regs *regs) @@ -141,9 +149,6 @@ static __inline__ int valid_user_regs(struct pt_regs *regs) return 0; } -#define instruction_pointer(regs) ((regs)->pc) - -#define profile_pc(regs) instruction_pointer(regs) #endif /* __KERNEL__ */ diff --git a/include/asm-avr32/thread_info.h b/include/asm-avr32/thread_info.h index 184b574289b4..07049f6c0d41 100644 --- a/include/asm-avr32/thread_info.h +++ b/include/asm-avr32/thread_info.h @@ -88,6 +88,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_MEMDIE 6 #define TIF_RESTORE_SIGMASK 7 /* restore signal mask in do_signal */ #define TIF_CPU_GOING_TO_SLEEP 8 /* CPU is entering sleep 0 mode */ +#define TIF_DEBUG 30 /* debugging enabled */ #define TIF_USERSPACE 31 /* true if FS sets userspace */ #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) -- cgit v1.2.3-59-g8ed1b From 9e4e980b027c892b02a73d6ea0d01c197b818a32 Mon Sep 17 00:00:00 2001 From: Hans-Christian Egtvedt Date: Mon, 3 Dec 2007 10:43:28 +0100 Subject: Disable VGA text console for AVR32 architecture This patch disables the VGA text console for AVR32 architecture since it does not provide the vga.h include file. AVR32 users should use framebuffer console instead if they need a console on an attached display. Signed-off-by: Hans-Christian Egtvedt Signed-off-by: Haavard Skinnemoen --- drivers/video/console/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig index b87ed37ac0c1..2b53d1f56281 100644 --- a/drivers/video/console/Kconfig +++ b/drivers/video/console/Kconfig @@ -6,7 +6,7 @@ menu "Console display driver support" config VGA_CONSOLE bool "VGA text console" if EMBEDDED || !X86 - depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN + depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN && !AVR32 default y help Saying Y here will allow you to use Linux in text mode through a -- cgit v1.2.3-59-g8ed1b From a7f5bf9b95ace39cd8b61e8c9ca1035966779ed1 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Wed, 31 Oct 2007 15:22:34 +0100 Subject: [AVR32] Include instrumentation menu Remove KPROBES option from Kconfig.debug and include kernel/Kconfig.instrumentation. Signed-off-by: Haavard Skinnemoen --- arch/avr32/Kconfig | 2 ++ arch/avr32/Kconfig.debug | 10 ---------- 2 files changed, 2 insertions(+), 10 deletions(-) diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index b77abce10c7a..bc08c7f0883f 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -219,6 +219,8 @@ source "drivers/Kconfig" source "fs/Kconfig" +source "kernel/Kconfig.instrumentation" + source "arch/avr32/Kconfig.debug" source "security/Kconfig" diff --git a/arch/avr32/Kconfig.debug b/arch/avr32/Kconfig.debug index 64ace00fe6cb..2283933a9a93 100644 --- a/arch/avr32/Kconfig.debug +++ b/arch/avr32/Kconfig.debug @@ -6,14 +6,4 @@ config TRACE_IRQFLAGS_SUPPORT source "lib/Kconfig.debug" -config KPROBES - bool "Kprobes" - depends on DEBUG_KERNEL - help - Kprobes allows you to trap at almost any kernel address and - execute a callback function. register_kprobe() establishes - a probepoint and specifies the callback. Kprobes is useful - for kernel debugging, non-intrusive instrumentation and testing. - If in doubt, say "N". - endmenu -- cgit v1.2.3-59-g8ed1b From 2853ce5ecefe9d9ca119f33db0c23a3f075e35d9 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Wed, 4 Jan 2006 17:26:23 +0100 Subject: [AVR32] Oprofile support This adds the necessary architecture code to run oprofile on AVR32 using the performance counters documented by the AVR32 Architecture Manual. Signed-off-by: Haavard Skinnemoen Acked-by: Philippe Elie --- arch/avr32/Kconfig | 3 + arch/avr32/Makefile | 1 + arch/avr32/oprofile/Makefile | 8 ++ arch/avr32/oprofile/op_model_avr32.c | 235 +++++++++++++++++++++++++++++++++++ 4 files changed, 247 insertions(+) create mode 100644 arch/avr32/oprofile/Makefile create mode 100644 arch/avr32/oprofile/op_model_avr32.c diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index bc08c7f0883f..767a19cfa423 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -54,6 +54,9 @@ config ARCH_HAS_ILOG2_U32 config ARCH_HAS_ILOG2_U64 def_bool n +config ARCH_SUPPORTS_OPROFILE + def_bool y + config GENERIC_HWEIGHT def_bool y diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile index 87918647be6d..f75d52cd2a4c 100644 --- a/arch/avr32/Makefile +++ b/arch/avr32/Makefile @@ -31,6 +31,7 @@ core-$(CONFIG_BOARD_ATNGW100) += arch/avr32/boards/atngw100/ core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/ core-y += arch/avr32/kernel/ core-y += arch/avr32/mm/ +drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/ libs-y += arch/avr32/lib/ archincdir-$(CONFIG_PLATFORM_AT32AP) := arch-at32ap diff --git a/arch/avr32/oprofile/Makefile b/arch/avr32/oprofile/Makefile new file mode 100644 index 000000000000..1fe81c3c1e86 --- /dev/null +++ b/arch/avr32/oprofile/Makefile @@ -0,0 +1,8 @@ +obj-$(CONFIG_OPROFILE) += oprofile.o + +oprofile-y := $(addprefix ../../../drivers/oprofile/, \ + oprof.o cpu_buffer.o buffer_sync.o \ + event_buffer.o oprofile_files.o \ + oprofilefs.o oprofile_stats.o \ + timer_int.o) +oprofile-y += op_model_avr32.o diff --git a/arch/avr32/oprofile/op_model_avr32.c b/arch/avr32/oprofile/op_model_avr32.c new file mode 100644 index 000000000000..e2f876bfc86b --- /dev/null +++ b/arch/avr32/oprofile/op_model_avr32.c @@ -0,0 +1,235 @@ +/* + * AVR32 Performance Counter Driver + * + * Copyright (C) 2005-2007 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Author: Ronny Pedersen + */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define AVR32_PERFCTR_IRQ_GROUP 0 +#define AVR32_PERFCTR_IRQ_LINE 1 + +enum { PCCNT, PCNT0, PCNT1, NR_counter }; + +struct avr32_perf_counter { + unsigned long enabled; + unsigned long event; + unsigned long count; + unsigned long unit_mask; + unsigned long kernel; + unsigned long user; + + u32 ie_mask; + u32 flag_mask; +}; + +static struct avr32_perf_counter counter[NR_counter] = { + { + .ie_mask = SYSREG_BIT(IEC), + .flag_mask = SYSREG_BIT(FC), + }, { + .ie_mask = SYSREG_BIT(IE0), + .flag_mask = SYSREG_BIT(F0), + }, { + .ie_mask = SYSREG_BIT(IE1), + .flag_mask = SYSREG_BIT(F1), + }, +}; + +static void avr32_perf_counter_reset(void) +{ + /* Reset all counter and disable/clear all interrupts */ + sysreg_write(PCCR, (SYSREG_BIT(PCCR_R) + | SYSREG_BIT(PCCR_C) + | SYSREG_BIT(FC) + | SYSREG_BIT(F0) + | SYSREG_BIT(F1))); +} + +static irqreturn_t avr32_perf_counter_interrupt(int irq, void *dev_id) +{ + struct avr32_perf_counter *ctr = dev_id; + struct pt_regs *regs; + u32 pccr; + + if (likely(!(intc_get_pending(AVR32_PERFCTR_IRQ_GROUP) + & (1 << AVR32_PERFCTR_IRQ_LINE)))) + return IRQ_NONE; + + regs = get_irq_regs(); + pccr = sysreg_read(PCCR); + + /* Clear the interrupt flags we're about to handle */ + sysreg_write(PCCR, pccr); + + /* PCCNT */ + if (ctr->enabled && (pccr & ctr->flag_mask)) { + sysreg_write(PCCNT, -ctr->count); + oprofile_add_sample(regs, PCCNT); + } + ctr++; + /* PCNT0 */ + if (ctr->enabled && (pccr & ctr->flag_mask)) { + sysreg_write(PCNT0, -ctr->count); + oprofile_add_sample(regs, PCNT0); + } + ctr++; + /* PCNT1 */ + if (ctr->enabled && (pccr & ctr->flag_mask)) { + sysreg_write(PCNT1, -ctr->count); + oprofile_add_sample(regs, PCNT1); + } + + return IRQ_HANDLED; +} + +static int avr32_perf_counter_create_files(struct super_block *sb, + struct dentry *root) +{ + struct dentry *dir; + unsigned int i; + char filename[4]; + + for (i = 0; i < NR_counter; i++) { + snprintf(filename, sizeof(filename), "%u", i); + dir = oprofilefs_mkdir(sb, root, filename); + + oprofilefs_create_ulong(sb, dir, "enabled", + &counter[i].enabled); + oprofilefs_create_ulong(sb, dir, "event", + &counter[i].event); + oprofilefs_create_ulong(sb, dir, "count", + &counter[i].count); + + /* Dummy entries */ + oprofilefs_create_ulong(sb, dir, "kernel", + &counter[i].kernel); + oprofilefs_create_ulong(sb, dir, "user", + &counter[i].user); + oprofilefs_create_ulong(sb, dir, "unit_mask", + &counter[i].unit_mask); + } + + return 0; +} + +static int avr32_perf_counter_setup(void) +{ + struct avr32_perf_counter *ctr; + u32 pccr; + int ret; + int i; + + pr_debug("avr32_perf_counter_setup\n"); + + if (sysreg_read(PCCR) & SYSREG_BIT(PCCR_E)) { + printk(KERN_ERR + "oprofile: setup: perf counter already enabled\n"); + return -EBUSY; + } + + ret = request_irq(AVR32_PERFCTR_IRQ_GROUP, + avr32_perf_counter_interrupt, IRQF_SHARED, + "oprofile", counter); + if (ret) + return ret; + + avr32_perf_counter_reset(); + + pccr = 0; + for (i = PCCNT; i < NR_counter; i++) { + ctr = &counter[i]; + if (!ctr->enabled) + continue; + + pr_debug("enabling counter %d...\n", i); + + pccr |= ctr->ie_mask; + + switch (i) { + case PCCNT: + /* PCCNT always counts cycles, so no events */ + sysreg_write(PCCNT, -ctr->count); + break; + case PCNT0: + pccr |= SYSREG_BF(CONF0, ctr->event); + sysreg_write(PCNT0, -ctr->count); + break; + case PCNT1: + pccr |= SYSREG_BF(CONF1, ctr->event); + sysreg_write(PCNT1, -ctr->count); + break; + } + } + + pr_debug("oprofile: writing 0x%x to PCCR...\n", pccr); + + sysreg_write(PCCR, pccr); + + return 0; +} + +static void avr32_perf_counter_shutdown(void) +{ + pr_debug("avr32_perf_counter_shutdown\n"); + + avr32_perf_counter_reset(); + free_irq(AVR32_PERFCTR_IRQ_GROUP, counter); +} + +static int avr32_perf_counter_start(void) +{ + pr_debug("avr32_perf_counter_start\n"); + + sysreg_write(PCCR, sysreg_read(PCCR) | SYSREG_BIT(PCCR_E)); + + return 0; +} + +static void avr32_perf_counter_stop(void) +{ + pr_debug("avr32_perf_counter_stop\n"); + + sysreg_write(PCCR, sysreg_read(PCCR) & ~SYSREG_BIT(PCCR_E)); +} + +static struct oprofile_operations avr32_perf_counter_ops __initdata = { + .create_files = avr32_perf_counter_create_files, + .setup = avr32_perf_counter_setup, + .shutdown = avr32_perf_counter_shutdown, + .start = avr32_perf_counter_start, + .stop = avr32_perf_counter_stop, + .cpu_type = "avr32", +}; + +int __init oprofile_arch_init(struct oprofile_operations *ops) +{ + if (!(current_cpu_data.features & AVR32_FEATURE_PCTR)) + return -ENODEV; + + memcpy(ops, &avr32_perf_counter_ops, + sizeof(struct oprofile_operations)); + + printk(KERN_INFO "oprofile: using AVR32 performance monitoring.\n"); + + return 0; +} + +void oprofile_arch_exit(void) +{ + +} -- cgit v1.2.3-59-g8ed1b From 281ef58ccf62eaa6c4e4b7e4c0a3ee6b52e84e5b Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Fri, 7 Dec 2007 10:21:02 +0100 Subject: [AVR32] Provide more CPU information in /proc/cpuinfo and dmesg Add the following fields to /proc/cpuinfo: * chip type and revision (from the JTAG chip id) * cpu MHz (from clk_get_rate()) * features (from the CONFIG0 register) Also rename "cpu family" to "cpu arch" and "cpu type" to "cpu core" to remove some ambiguity. Show chip type and revision at bootup, and clarify that the other kinds of IDs that we're already printing are for the cpu core and architecture. Rename "AP7000" to "AP7" since that's the name of the core. Signed-off-by: Haavard Skinnemoen --- arch/avr32/kernel/cpu.c | 94 +++++++++++++++++++++++++++++++------------ include/asm-avr32/processor.h | 14 +++++++ 2 files changed, 82 insertions(+), 26 deletions(-) diff --git a/arch/avr32/kernel/cpu.c b/arch/avr32/kernel/cpu.c index 2714cf6452b5..14610019216e 100644 --- a/arch/avr32/kernel/cpu.c +++ b/arch/avr32/kernel/cpu.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include @@ -187,9 +188,20 @@ static int __init topology_init(void) subsys_initcall(topology_init); +struct chip_id_map { + u16 mid; + u16 pn; + const char *name; +}; + +static const struct chip_id_map chip_names[] = { + { .mid = 0x1f, .pn = 0x1e82, .name = "AT32AP700x" }, +}; +#define NR_CHIP_NAMES ARRAY_SIZE(chip_names) + static const char *cpu_names[] = { "Morgan", - "AP7000", + "AP7", }; #define NR_CPU_NAMES ARRAY_SIZE(cpu_names) @@ -206,12 +218,32 @@ static const char *mmu_types[] = { "MPU" }; +static const char *cpu_feature_flags[] = { + "rmw", "dsp", "simd", "ocd", "perfctr", "java", "fpu", +}; + +static const char *get_chip_name(struct avr32_cpuinfo *cpu) +{ + unsigned int i; + unsigned int mid = avr32_get_manufacturer_id(cpu); + unsigned int pn = avr32_get_product_number(cpu); + + for (i = 0; i < NR_CHIP_NAMES; i++) { + if (chip_names[i].mid == mid && chip_names[i].pn == pn) + return chip_names[i].name; + } + + return "(unknown)"; +} + void __init setup_processor(void) { unsigned long config0, config1; unsigned long features; unsigned cpu_id, cpu_rev, arch_id, arch_rev, mmu_type; + unsigned device_id; unsigned tmp; + unsigned i; config0 = sysreg_read(CONFIG0); config1 = sysreg_read(CONFIG1); @@ -221,11 +253,14 @@ void __init setup_processor(void) arch_rev = SYSREG_BFEXT(AR, config0); mmu_type = SYSREG_BFEXT(MMUT, config0); + device_id = ocd_read(DID); + boot_cpu_data.arch_type = arch_id; boot_cpu_data.cpu_type = cpu_id; boot_cpu_data.arch_revision = arch_rev; boot_cpu_data.cpu_revision = cpu_rev; boot_cpu_data.tlb_config = mmu_type; + boot_cpu_data.device_id = device_id; tmp = SYSREG_BFEXT(ILSZ, config1); if (tmp) { @@ -247,41 +282,34 @@ void __init setup_processor(void) return; } - printk ("CPU: %s [%02x] revision %d (%s revision %d)\n", + printk ("CPU: %s chip revision %c\n", get_chip_name(&boot_cpu_data), + avr32_get_chip_revision(&boot_cpu_data) + 'A'); + printk ("CPU: %s [%02x] core revision %d (%s arch revision %d)\n", cpu_names[cpu_id], cpu_id, cpu_rev, arch_names[arch_id], arch_rev); printk ("CPU: MMU configuration: %s\n", mmu_types[mmu_type]); printk ("CPU: features:"); features = 0; - if (config0 & SYSREG_BIT(CONFIG0_R)) { + if (config0 & SYSREG_BIT(CONFIG0_R)) features |= AVR32_FEATURE_RMW; - printk(" rmw"); - } - if (config0 & SYSREG_BIT(CONFIG0_D)) { + if (config0 & SYSREG_BIT(CONFIG0_D)) features |= AVR32_FEATURE_DSP; - printk(" dsp"); - } - if (config0 & SYSREG_BIT(CONFIG0_S)) { + if (config0 & SYSREG_BIT(CONFIG0_S)) features |= AVR32_FEATURE_SIMD; - printk(" simd"); - } - if (config0 & SYSREG_BIT(CONFIG0_O)) { + if (config0 & SYSREG_BIT(CONFIG0_O)) features |= AVR32_FEATURE_OCD; - printk(" ocd"); - } - if (config0 & SYSREG_BIT(CONFIG0_P)) { + if (config0 & SYSREG_BIT(CONFIG0_P)) features |= AVR32_FEATURE_PCTR; - printk(" perfctr"); - } - if (config0 & SYSREG_BIT(CONFIG0_J)) { + if (config0 & SYSREG_BIT(CONFIG0_J)) features |= AVR32_FEATURE_JAVA; - printk(" java"); - } - if (config0 & SYSREG_BIT(CONFIG0_F)) { + if (config0 & SYSREG_BIT(CONFIG0_F)) features |= AVR32_FEATURE_FPU; - printk(" fpu"); - } + + for (i = 0; i < ARRAY_SIZE(cpu_feature_flags); i++) + if (features & (1 << i)) + printk(" %s", cpu_feature_flags[i]); + printk("\n"); boot_cpu_data.features = features; } @@ -291,6 +319,8 @@ static int c_show(struct seq_file *m, void *v) { unsigned int icache_size, dcache_size; unsigned int cpu = smp_processor_id(); + unsigned int freq; + unsigned int i; icache_size = boot_cpu_data.icache.ways * boot_cpu_data.icache.sets * @@ -301,15 +331,21 @@ static int c_show(struct seq_file *m, void *v) seq_printf(m, "processor\t: %d\n", cpu); + seq_printf(m, "chip type\t: %s revision %c\n", + get_chip_name(&boot_cpu_data), + avr32_get_chip_revision(&boot_cpu_data) + 'A'); if (boot_cpu_data.arch_type < NR_ARCH_NAMES) - seq_printf(m, "cpu family\t: %s revision %d\n", + seq_printf(m, "cpu arch\t: %s revision %d\n", arch_names[boot_cpu_data.arch_type], boot_cpu_data.arch_revision); if (boot_cpu_data.cpu_type < NR_CPU_NAMES) - seq_printf(m, "cpu type\t: %s revision %d\n", + seq_printf(m, "cpu core\t: %s revision %d\n", cpu_names[boot_cpu_data.cpu_type], boot_cpu_data.cpu_revision); + freq = (clk_get_rate(boot_cpu_data.clk) + 500) / 1000; + seq_printf(m, "cpu MHz\t\t: %u.%03u\n", freq / 1000, freq % 1000); + seq_printf(m, "i-cache\t\t: %dK (%u ways x %u sets x %u)\n", icache_size >> 10, boot_cpu_data.icache.ways, @@ -320,7 +356,13 @@ static int c_show(struct seq_file *m, void *v) boot_cpu_data.dcache.ways, boot_cpu_data.dcache.sets, boot_cpu_data.dcache.linesz); - seq_printf(m, "bogomips\t: %lu.%02lu\n", + + seq_printf(m, "features\t:"); + for (i = 0; i < ARRAY_SIZE(cpu_feature_flags); i++) + if (boot_cpu_data.features & (1 << i)) + seq_printf(m, " %s", cpu_feature_flags[i]); + + seq_printf(m, "\nbogomips\t: %lu.%02lu\n", boot_cpu_data.loops_per_jiffy / (500000/HZ), (boot_cpu_data.loops_per_jiffy / (5000/HZ)) % 100); diff --git a/include/asm-avr32/processor.h b/include/asm-avr32/processor.h index a52576b25afe..4212551c1cd9 100644 --- a/include/asm-avr32/processor.h +++ b/include/asm-avr32/processor.h @@ -57,11 +57,25 @@ struct avr32_cpuinfo { unsigned short cpu_revision; enum tlb_config tlb_config; unsigned long features; + u32 device_id; struct cache_info icache; struct cache_info dcache; }; +static inline unsigned int avr32_get_manufacturer_id(struct avr32_cpuinfo *cpu) +{ + return (cpu->device_id >> 1) & 0x7f; +} +static inline unsigned int avr32_get_product_number(struct avr32_cpuinfo *cpu) +{ + return (cpu->device_id >> 12) & 0xffff; +} +static inline unsigned int avr32_get_chip_revision(struct avr32_cpuinfo *cpu) +{ + return (cpu->device_id >> 28) & 0x0f; +} + extern struct avr32_cpuinfo boot_cpu_data; #ifdef CONFIG_SMP -- cgit v1.2.3-59-g8ed1b From 438ff3f3cc33833206a48492e9d6674e4e82bed8 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 29 Oct 2007 15:28:07 +0100 Subject: [AVR32] Add support for AT32AP7001 and AT32AP7002 These are derivatives of the AT32AP7000 chip, which means that most of the code stays the same. Rename a few files, functions, definitions and config symbols to reflect that they apply to all AP700x chips, and exclude some platform devices from chips where they aren't present. Signed-off-by: Haavard Skinnemoen --- arch/avr32/Kconfig | 21 +- arch/avr32/Makefile | 2 +- arch/avr32/boards/atngw100/setup.c | 2 +- arch/avr32/configs/atngw100_defconfig | 9 +- arch/avr32/configs/atstk1002_defconfig | 8 +- arch/avr32/mach-at32ap/Kconfig | 12 +- arch/avr32/mach-at32ap/Makefile | 4 +- arch/avr32/mach-at32ap/at32ap7000.c | 1730 --------------------------- arch/avr32/mach-at32ap/at32ap700x.c | 1742 ++++++++++++++++++++++++++++ drivers/watchdog/Kconfig | 2 +- include/asm-avr32/arch-at32ap/at32ap7000.h | 35 - include/asm-avr32/arch-at32ap/at32ap700x.h | 35 + include/asm-avr32/arch-at32ap/cpu.h | 2 +- include/asm-avr32/arch-at32ap/io.h | 4 +- 14 files changed, 1819 insertions(+), 1789 deletions(-) delete mode 100644 arch/avr32/mach-at32ap/at32ap7000.c create mode 100644 arch/avr32/mach-at32ap/at32ap700x.c delete mode 100644 include/asm-avr32/arch-at32ap/at32ap7000.h create mode 100644 include/asm-avr32/arch-at32ap/at32ap700x.h diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index 767a19cfa423..e37e6b92658d 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -84,13 +84,26 @@ config PLATFORM_AT32AP select MMU select PERFORMANCE_COUNTERS +config CPU_AT32AP700X + bool + select PLATFORM_AT32AP + choice prompt "AVR32 CPU type" default CPU_AT32AP7000 config CPU_AT32AP7000 bool "AT32AP7000" - select PLATFORM_AT32AP + select CPU_AT32AP700X + +config CPU_AT32AP7001 + bool "AT32AP7001" + select CPU_AT32AP700X + +config CPU_AT32AP7002 + bool "AT32AP7002" + select CPU_AT32AP700X + endchoice # @@ -126,15 +139,15 @@ source "arch/avr32/mach-at32ap/Kconfig" config LOAD_ADDRESS hex - default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y + default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y config ENTRY_ADDRESS hex - default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y + default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y config PHYS_OFFSET hex - default 0x10000000 if CPU_AT32AP7000=y + default 0x10000000 if CPU_AT32AP700X=y source "kernel/Kconfig.preempt" diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile index f75d52cd2a4c..17a3529341dd 100644 --- a/arch/avr32/Makefile +++ b/arch/avr32/Makefile @@ -16,7 +16,7 @@ KBUILD_AFLAGS += -mrelax -mno-pic CFLAGS_MODULE += -mno-relax LDFLAGS_vmlinux += --relax -cpuflags-$(CONFIG_CPU_AT32AP7000) += -mcpu=ap7000 +cpuflags-$(CONFIG_PLATFORM_AT32AP) += -march=ap KBUILD_CFLAGS += $(cpuflags-y) KBUILD_AFLAGS += $(cpuflags-y) diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c index 52987c81d668..a398be284966 100644 --- a/arch/avr32/boards/atngw100/setup.c +++ b/arch/avr32/boards/atngw100/setup.c @@ -20,7 +20,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig index b799a68ffd97..374c17bcc05e 100644 --- a/arch/avr32/configs/atngw100_defconfig +++ b/arch/avr32/configs/atngw100_defconfig @@ -111,7 +111,10 @@ CONFIG_SUBARCH_AVR32B=y CONFIG_MMU=y CONFIG_PERFORMANCE_COUNTERS=y CONFIG_PLATFORM_AT32AP=y +CONFIG_CPU_AT32AP700X=y CONFIG_CPU_AT32AP7000=y +# CONFIG_CPU_AT32AP7001 is not set +# CONFIG_CPU_AT32AP7002 is not set # CONFIG_BOARD_ATSTK1000 is not set CONFIG_BOARD_ATNGW100=y CONFIG_LOADER_U_BOOT=y @@ -119,9 +122,9 @@ CONFIG_LOADER_U_BOOT=y # # Atmel AVR32 AP options # -# CONFIG_AP7000_32_BIT_SMC is not set -CONFIG_AP7000_16_BIT_SMC=y -# CONFIG_AP7000_8_BIT_SMC is not set +# CONFIG_AP700X_32_BIT_SMC is not set +CONFIG_AP700X_16_BIT_SMC=y +# CONFIG_AP700X_8_BIT_SMC is not set CONFIG_LOAD_ADDRESS=0x10000000 CONFIG_ENTRY_ADDRESS=0x90000000 CONFIG_PHYS_OFFSET=0x10000000 diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig index 3b977fdbaa78..7614c5465cd6 100644 --- a/arch/avr32/configs/atstk1002_defconfig +++ b/arch/avr32/configs/atstk1002_defconfig @@ -114,6 +114,8 @@ CONFIG_MMU=y CONFIG_PERFORMANCE_COUNTERS=y CONFIG_PLATFORM_AT32AP=y CONFIG_CPU_AT32AP7000=y +# CONFIG_CPU_AT32AP7001 is not set +# CONFIG_CPU_AT32AP7002 is not set CONFIG_BOARD_ATSTK1002=y CONFIG_BOARD_ATSTK1000=y # CONFIG_BOARD_ATNGW100 is not set @@ -122,9 +124,9 @@ CONFIG_LOADER_U_BOOT=y # # Atmel AVR32 AP options # -# CONFIG_AP7000_32_BIT_SMC is not set -CONFIG_AP7000_16_BIT_SMC=y -# CONFIG_AP7000_8_BIT_SMC is not set +# CONFIG_AP700X_32_BIT_SMC is not set +CONFIG_AP700X_16_BIT_SMC=y +# CONFIG_AP700X_8_BIT_SMC is not set CONFIG_LOAD_ADDRESS=0x10000000 CONFIG_ENTRY_ADDRESS=0x90000000 CONFIG_PHYS_OFFSET=0x10000000 diff --git a/arch/avr32/mach-at32ap/Kconfig b/arch/avr32/mach-at32ap/Kconfig index eb307838457b..a7bbcc82058e 100644 --- a/arch/avr32/mach-at32ap/Kconfig +++ b/arch/avr32/mach-at32ap/Kconfig @@ -3,9 +3,9 @@ if PLATFORM_AT32AP menu "Atmel AVR32 AP options" choice - prompt "AT32AP7000 static memory bus width" - depends on CPU_AT32AP7000 - default AP7000_16_BIT_SMC + prompt "AT32AP700x static memory bus width" + depends on CPU_AT32AP700X + default AP700X_16_BIT_SMC help Define the width of the AP7000 external static memory interface. This is used to determine how to mangle the address and/or data @@ -15,13 +15,13 @@ choice width for all chip selects, excluding the flash (which is using raw access and is thus not affected by any of this.) -config AP7000_32_BIT_SMC +config AP700X_32_BIT_SMC bool "32 bit" -config AP7000_16_BIT_SMC +config AP700X_16_BIT_SMC bool "16 bit" -config AP7000_8_BIT_SMC +config AP700X_8_BIT_SMC bool "8 bit" endchoice diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile index a8b445046e3e..5e9f8217befc 100644 --- a/arch/avr32/mach-at32ap/Makefile +++ b/arch/avr32/mach-at32ap/Makefile @@ -1,4 +1,4 @@ obj-y += at32ap.o clock.o intc.o extint.o pio.o hsmc.o -obj-$(CONFIG_CPU_AT32AP7000) += at32ap7000.o -obj-$(CONFIG_CPU_AT32AP7000) += time-tc.o +obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o +obj-$(CONFIG_CPU_AT32AP700X) += time-tc.o obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c deleted file mode 100644 index 7c4388f4f17f..000000000000 --- a/arch/avr32/mach-at32ap/at32ap7000.c +++ /dev/null @@ -1,1730 +0,0 @@ -/* - * Copyright (C) 2005-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include -#include -#include - -#include - -#include -#include -#include - -#include - - The VID_HARDWARE_ types are unique to each device. Numbers are assigned by - alan@redhat.com when device drivers are going to be released. Until then you - can pull a suitably large number out of your hat and use it. 10000 should be - safe for a very long time even allowing for the huge number of vendors - making new and different radio cards at the moment. - We declare an open and close routine, but we do not need read or write, which are used to read and write video data to or from the card itself. As @@ -844,7 +836,6 @@ static struct video_device my_camera "My Camera", VID_TYPE_OVERLAY|VID_TYPE_SCALES|\ VID_TYPE_CAPTURE|VID_TYPE_CHROMAKEY, - VID_HARDWARE_MYCAMERA, camera_open. camera_close, camera_read, /* no read */ diff --git a/drivers/media/video/usbvision/usbvision.h b/drivers/media/video/usbvision/usbvision.h index c32f68566bf9..dd80a98780f2 100644 --- a/drivers/media/video/usbvision/usbvision.h +++ b/drivers/media/video/usbvision/usbvision.h @@ -41,10 +41,6 @@ #define USBVISION_DEBUG /* Turn on debug messages */ -#ifndef VID_HARDWARE_USBVISION - #define VID_HARDWARE_USBVISION 34 /* USBVision Video Grabber */ -#endif - #define USBVISION_PWR_REG 0x00 #define USBVISION_SSPND_EN (1 << 1) #define USBVISION_RES2 (1 << 2) -- cgit v1.2.3-59-g8ed1b From 91821ff3f958c16bf84d02258dd79da792c66ca8 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 2 Dec 2007 09:35:33 -0300 Subject: V4L/DVB (6665b): add ivtv to MAINTAINERS Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- MAINTAINERS | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 2340cfb1e25d..17524afa7475 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2141,6 +2141,15 @@ L: isdn4linux@listserv.isdn4linux.de W: http://www.melware.de S: Maintained +IVTV VIDEO4LINUX DRIVER +P: Hans Verkuil +M: hverkuil@xs4all.nl +L: ivtv-devel@ivtvdriver.org +L: ivtv-users@ivtvdriver.org +L: video4linux-list@redhat.com +W: http://www.ivtvdriver.org +S: Maintained + JOURNALLING FLASH FILE SYSTEM V2 (JFFS2) P: David Woodhouse M: dwmw2@infradead.org -- cgit v1.2.3-59-g8ed1b From 0d65cd4f2bfe70872e4218d9d35d37a7000d6739 Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Sun, 4 Nov 2007 17:59:28 -0300 Subject: V4L/DVB (6667): Fix access to configuration space while in D3 pci_save_state should be called before pci_set_power_state and pci_restore_state after pci_set_power_state Signed-off-by: Maxim Levitsky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index 76410f5bdcdd..40cdec26a7f4 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -1194,10 +1194,10 @@ static int saa7134_suspend(struct pci_dev *pci_dev , pm_message_t state) if (dev->remote) saa7134_ir_stop(dev); - pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state)); pci_save_state(pci_dev); + pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state)); - return 0; + return 0; } static int saa7134_resume(struct pci_dev *pci_dev) @@ -1205,8 +1205,8 @@ static int saa7134_resume(struct pci_dev *pci_dev) struct saa7134_dev *dev = pci_get_drvdata(pci_dev); unsigned long flags; - pci_restore_state(pci_dev); pci_set_power_state(pci_dev, PCI_D0); + pci_restore_state(pci_dev); /* Do things that are done in saa7134_initdev , except of initializing memory structures.*/ -- cgit v1.2.3-59-g8ed1b From 3203cb86d22c63504f8368151029bf9dad014ddb Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Sun, 4 Nov 2007 19:34:23 -0300 Subject: V4L/DVB (6668): Fix theoretical races between IRQ handler and .suspend/resume *dev->insuspend = 1 should be set before synchronize_irq *ACK interrupts after synchronize_irq, to make sure there aren't pending interrupts. *Add barrier before we restart interrupts so the handler will 100% see the dev->insuspend Signed-off-by: Maxim Levitsky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-core.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index 40cdec26a7f4..85c165d17301 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -1181,8 +1181,13 @@ static int saa7134_suspend(struct pci_dev *pci_dev , pm_message_t state) saa_writel(SAA7134_IRQ2, 0); saa_writel(SAA7134_MAIN_CTRL, 0); - synchronize_irq(pci_dev->irq); dev->insuspend = 1; + synchronize_irq(pci_dev->irq); + + /* ACK interrupts once more, just in case, + since the IRQ handler won't ack them anymore*/ + + saa_writel(SAA7134_IRQ_REPORT, saa_readl(SAA7134_IRQ_REPORT)); /* Disable timeout timers - if we have active buffers, we will fill them on resume*/ @@ -1246,6 +1251,7 @@ static int saa7134_resume(struct pci_dev *pci_dev) /* start DMA now*/ dev->insuspend = 0; + smp_wmb(); saa7134_set_dmabits(dev); spin_unlock_irqrestore(&dev->slock, flags); -- cgit v1.2.3-59-g8ed1b From 5c01203fd289214ae3062dab4039fcbab4b2b84f Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Sun, 4 Nov 2007 18:21:25 -0300 Subject: V4L/DVB (6669): Add few missing bits of code to saa7134_resume First the saa7134_initdev waits between saa7134_hwinit1 and saa7134_hwinit2 , thus it is probably wise to do the same in saa7134_resume some hardware probably needs this. Call saa7134_irq_video_signalchange in .resume like in saa7134_resume to make saa7134_resume mirror perfectly the saa7134_initdev although this call isn't strictly necessary in the saa7134_initdev, but it won't harm anyway. Signed-off-by: Maxim Levitsky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index 85c165d17301..f5e43d375d2a 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -1227,6 +1227,7 @@ static int saa7134_resume(struct pci_dev *pci_dev) saa7134_ir_start(dev, dev->remote); saa7134_hw_enable1(dev); + msleep(100); saa7134_board_init2(dev); @@ -1238,6 +1239,8 @@ static int saa7134_resume(struct pci_dev *pci_dev) saa7134_enable_i2s(dev); saa7134_hw_enable2(dev); + saa7134_irq_video_signalchange(dev); + /*resume unfinished buffer(s)*/ spin_lock_irqsave(&dev->slock, flags); saa7134_buffer_requeue(dev, &dev->video_q); -- cgit v1.2.3-59-g8ed1b From f36224d3992a7734349cdd6289ff73c3d007ce09 Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Tue, 23 Oct 2007 00:58:59 -0300 Subject: V4L/DVB (6670): V4L: saa7134: tvaudio cleanups move some tv-audio initialization code out of tvaudio thread, and call it on resume too. Signed-off-by: Maxim Levitsky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-core.c | 1 + drivers/media/video/saa7134/saa7134-tvaudio.c | 79 +++++++++++++-------------- drivers/media/video/saa7134/saa7134.h | 1 + 3 files changed, 41 insertions(+), 40 deletions(-) diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index f5e43d375d2a..cbddd35f1618 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -1235,6 +1235,7 @@ static int saa7134_resume(struct pci_dev *pci_dev) saa7134_set_tvnorm_hw(dev); saa7134_tvaudio_setmute(dev); saa7134_tvaudio_setvolume(dev, dev->ctl_volume); + saa7134_tvaudio_init(dev); saa7134_tvaudio_do_scan(dev); saa7134_enable_i2s(dev); saa7134_hw_enable2(dev); diff --git a/drivers/media/video/saa7134/saa7134-tvaudio.c b/drivers/media/video/saa7134/saa7134-tvaudio.c index f8e304c76232..4e9810469ae3 100644 --- a/drivers/media/video/saa7134/saa7134-tvaudio.c +++ b/drivers/media/video/saa7134/saa7134-tvaudio.c @@ -163,32 +163,6 @@ static struct saa7134_tvaudio tvaudio[] = { /* ------------------------------------------------------------------ */ -static void tvaudio_init(struct saa7134_dev *dev) -{ - int clock = saa7134_boards[dev->board].audio_clock; - - if (UNSET != audio_clock_override) - clock = audio_clock_override; - - /* init all audio registers */ - saa_writeb(SAA7134_AUDIO_PLL_CTRL, 0x00); - if (need_resched()) - schedule(); - else - udelay(10); - - saa_writeb(SAA7134_AUDIO_CLOCK0, clock & 0xff); - saa_writeb(SAA7134_AUDIO_CLOCK1, (clock >> 8) & 0xff); - saa_writeb(SAA7134_AUDIO_CLOCK2, (clock >> 16) & 0xff); - /* frame locked audio is mandatory for NICAM */ - saa_writeb(SAA7134_AUDIO_PLL_CTRL, 0x01); - - saa_writeb(SAA7134_NICAM_ERROR_LOW, 0x14); - saa_writeb(SAA7134_NICAM_ERROR_HIGH, 0x50); - saa_writeb(SAA7134_MONITOR_SELECT, 0xa0); - saa_writeb(SAA7134_FM_DEMATRIX, 0x80); -} - static u32 tvaudio_carr2reg(u32 carrier) { u64 a = carrier; @@ -517,9 +491,13 @@ static int tvaudio_thread(void *data) dev->thread.scan1 = dev->thread.scan2; dprintk("tvaudio thread scan start [%d]\n",dev->thread.scan1); dev->tvaudio = NULL; - tvaudio_init(dev); + + saa_writeb(SAA7134_MONITOR_SELECT, 0xa0); + saa_writeb(SAA7134_FM_DEMATRIX, 0x80); + if (dev->ctl_automute) dev->automute = 1; + mute_input_7134(dev); /* give the tuner some time */ @@ -784,27 +762,15 @@ static int mute_input_7133(struct saa7134_dev *dev) static int tvaudio_thread_ddep(void *data) { struct saa7134_dev *dev = data; - u32 value, norms, clock; + u32 value, norms; set_freezable(); - - clock = saa7134_boards[dev->board].audio_clock; - if (UNSET != audio_clock_override) - clock = audio_clock_override; - saa_writel(0x598 >> 2, clock); - - /* unmute */ - saa_dsp_writel(dev, 0x474 >> 2, 0x00); - saa_dsp_writel(dev, 0x450 >> 2, 0x00); - for (;;) { tvaudio_sleep(dev,-1); if (kthread_should_stop()) goto done; - restart: - try_to_freeze(); dev->thread.scan1 = dev->thread.scan2; @@ -978,6 +944,38 @@ int saa7134_tvaudio_getstereo(struct saa7134_dev *dev) return retval; } +void saa7134_tvaudio_init(struct saa7134_dev *dev) +{ + int clock = saa7134_boards[dev->board].audio_clock; + + if (UNSET != audio_clock_override) + clock = audio_clock_override; + + switch (dev->pci->device) { + case PCI_DEVICE_ID_PHILIPS_SAA7134: + /* init all audio registers */ + saa_writeb(SAA7134_AUDIO_PLL_CTRL, 0x00); + if (need_resched()) + schedule(); + else + udelay(10); + + saa_writeb(SAA7134_AUDIO_CLOCK0, clock & 0xff); + saa_writeb(SAA7134_AUDIO_CLOCK1, (clock >> 8) & 0xff); + saa_writeb(SAA7134_AUDIO_CLOCK2, (clock >> 16) & 0xff); + /* frame locked audio is mandatory for NICAM */ + saa_writeb(SAA7134_AUDIO_PLL_CTRL, 0x01); + saa_writeb(SAA7134_NICAM_ERROR_LOW, 0x14); + saa_writeb(SAA7134_NICAM_ERROR_HIGH, 0x50); + break; + case PCI_DEVICE_ID_PHILIPS_SAA7133: + case PCI_DEVICE_ID_PHILIPS_SAA7135: + saa_writel(0x598 >> 2, clock); + saa_dsp_writel(dev, 0x474 >> 2, 0x00); + saa_dsp_writel(dev, 0x450 >> 2, 0x00); + } +} + int saa7134_tvaudio_init2(struct saa7134_dev *dev) { int (*my_thread)(void *data) = NULL; @@ -994,6 +992,7 @@ int saa7134_tvaudio_init2(struct saa7134_dev *dev) dev->thread.thread = NULL; if (my_thread) { + saa7134_tvaudio_init(dev); /* start tvaudio thread */ dev->thread.thread = kthread_run(my_thread, dev, "%s", dev->name); if (IS_ERR(dev->thread.thread)) { diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index a531e3c6c941..5c5b07413076 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -678,6 +678,7 @@ void saa7134_tvaudio_setinput(struct saa7134_dev *dev, void saa7134_tvaudio_setvolume(struct saa7134_dev *dev, int level); int saa7134_tvaudio_getstereo(struct saa7134_dev *dev); +void saa7134_tvaudio_init(struct saa7134_dev *dev); int saa7134_tvaudio_init2(struct saa7134_dev *dev); int saa7134_tvaudio_fini(struct saa7134_dev *dev); int saa7134_tvaudio_do_scan(struct saa7134_dev *dev); -- cgit v1.2.3-59-g8ed1b From 00deff1a076dc1cf6743813657623626720bf0f5 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 24 Nov 2007 10:13:42 -0300 Subject: V4L/DVB (6671): Avoids checking digital/analog at check_firmware Since check_firmware is called via analog or digital set freq routines, move type selection to those routines. This avoids having several if's at the code, and simplifies the source code. A sideback effect is that implementing radio and other dvb types will become simpler. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-xc2028.c | 106 +++++++++++++++++-------------------- 1 file changed, 50 insertions(+), 56 deletions(-) diff --git a/drivers/media/video/tuner-xc2028.c b/drivers/media/video/tuner-xc2028.c index 1f14892a883a..94f367ab5718 100644 --- a/drivers/media/video/tuner-xc2028.c +++ b/drivers/media/video/tuner-xc2028.c @@ -608,15 +608,14 @@ static int load_scode(struct dvb_frontend *fe, unsigned int type, return 0; } -static int check_firmware(struct dvb_frontend *fe, enum tuner_mode new_mode, - v4l2_std_id std, fe_bandwidth_t bandwidth) +static int check_firmware(struct dvb_frontend *fe, unsigned int type, + v4l2_std_id std) { - struct xc2028_data *priv = fe->tuner_priv; - int rc = 0, is_retry = 0; - unsigned int type = 0; + struct xc2028_data *priv = fe->tuner_priv; struct firmware_properties new_fw; - u16 version, hwmodel; - v4l2_std_id std0; + int rc = 0, is_retry = 0; + u16 version, hwmodel; + v4l2_std_id std0; tuner_dbg("%s called\n", __FUNCTION__); @@ -633,32 +632,6 @@ static int check_firmware(struct dvb_frontend *fe, enum tuner_mode new_mode, if (priv->ctrl.mts) type |= MTS; - if (bandwidth == BANDWIDTH_7_MHZ || bandwidth == BANDWIDTH_8_MHZ) - type |= F8MHZ; - - /* FIXME: How to load FM and FM|INPUT1 firmwares? */ - - if (new_mode == T_DIGITAL_TV) { - if (priv->ctrl.d2633) - type |= D2633; - else - type |= D2620; - - switch (bandwidth) { - case BANDWIDTH_8_MHZ: - type |= DTV8; - break; - case BANDWIDTH_7_MHZ: - type |= DTV7; - break; - case BANDWIDTH_6_MHZ: - /* FIXME: Should allow select also ATSC */ - type |= DTV6 | QAM; - break; - default: - tuner_err("error: bandwidth not supported.\n"); - }; - } retry: new_fw.type = type; @@ -729,10 +702,6 @@ skip_base: /* Reloading std-specific firmware forces a SCODE update */ priv->cur_fw.scode_table = 0; - /* Add audio hack to std mask */ - if (new_mode == T_ANALOG_TV) - new_fw.id |= parse_audio_std_option(); - rc = load_firmware(fe, new_fw.type, &new_fw.id); if (rc == -ENOENT) rc = load_firmware(fe, new_fw.type & ~F8MHZ, &new_fw.id); @@ -840,9 +809,10 @@ ret: #define DIV 15625 -static int generic_set_tv_freq(struct dvb_frontend *fe, u32 freq /* in Hz */ , +static int generic_set_freq(struct dvb_frontend *fe, u32 freq /* in HZ */, enum tuner_mode new_mode, - v4l2_std_id std, fe_bandwidth_t bandwidth) + unsigned int type, + v4l2_std_id std) { struct xc2028_data *priv = fe->tuner_priv; int rc = -EINVAL; @@ -855,7 +825,7 @@ static int generic_set_tv_freq(struct dvb_frontend *fe, u32 freq /* in Hz */ , tuner_dbg("should set frequency %d kHz\n", freq / 1000); - if (check_firmware(fe, new_mode, std, bandwidth) < 0) + if (check_firmware(fe, type, std) < 0) goto ret; /* On some cases xc2028 can disable video output, if @@ -865,10 +835,9 @@ static int generic_set_tv_freq(struct dvb_frontend *fe, u32 freq /* in Hz */ , * that xc2028 will be in a safe state. * Maybe this might also be needed for DTV. */ - if (new_mode != T_DIGITAL_TV) + if (new_mode == T_ANALOG_TV) { rc = send_seq(priv, {0x00, 0x00}); - - if (new_mode == T_DIGITAL_TV) { + } else { offset = 2750000; if (priv->cur_fw.type & DTV7) offset -= 500000; @@ -914,32 +883,35 @@ ret: return rc; } -static int xc2028_set_tv_freq(struct dvb_frontend *fe, +static int xc2028_set_analog_freq(struct dvb_frontend *fe, struct analog_parameters *p) { struct xc2028_data *priv = fe->tuner_priv; - fe_bandwidth_t bw; + unsigned int type=0; + + tuner_dbg("%s called\n", __FUNCTION__); /* if std is not defined, choose one */ if (!p->std) p->std = V4L2_STD_MN; /* PAL/M, PAL/N, PAL/Nc and NTSC variants should use 6MHz firmware */ - if (p->std & V4L2_STD_MN) - bw = BANDWIDTH_6_MHZ; - else - bw = BANDWIDTH_8_MHZ; + if (!(p->std & V4L2_STD_MN)) + type |= F8MHZ; - tuner_dbg("%s called\n", __FUNCTION__); + /* Add audio hack to std mask */ + p->std |= parse_audio_std_option(); - return generic_set_tv_freq(fe, 62500l * p->frequency, T_ANALOG_TV, - p->std, bw); + return generic_set_freq(fe, 62500l * p->frequency, + T_ANALOG_TV, type, p->std); } static int xc2028_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) { struct xc2028_data *priv = fe->tuner_priv; + unsigned int type=0; + fe_bandwidth_t bw; tuner_dbg("%s called\n", __FUNCTION__); @@ -948,11 +920,33 @@ static int xc2028_set_params(struct dvb_frontend *fe, tuner_err("DTV type not implemented.\n"); return -EINVAL; } + bw = p->u.ofdm.bandwidth; - return generic_set_tv_freq(fe, p->frequency, T_DIGITAL_TV, - 0 /* NOT USED */, - p->u.ofdm.bandwidth); + if (bw == BANDWIDTH_7_MHZ || bw == BANDWIDTH_8_MHZ) + type |= F8MHZ; + if (priv->ctrl.d2633) + type |= D2633; + else + type |= D2620; + + switch (bw) { + case BANDWIDTH_8_MHZ: + type |= DTV8; + break; + case BANDWIDTH_7_MHZ: + type |= DTV7; + break; + case BANDWIDTH_6_MHZ: + /* FIXME: Should allow select also ATSC */ + type |= DTV6 | QAM; + break; + default: + tuner_err("error: bandwidth not supported.\n"); + }; + + return generic_set_freq(fe, p->frequency, + T_DIGITAL_TV, type, 0); } static int xc2028_sleep(struct dvb_frontend *fe) @@ -1052,7 +1046,7 @@ static const struct dvb_tuner_ops xc2028_dvb_tuner_ops = { }, .set_config = xc2028_set_config, - .set_analog_params = xc2028_set_tv_freq, + .set_analog_params = xc2028_set_analog_freq, .release = xc2028_dvb_release, .get_frequency = xc2028_get_frequency, .get_rf_strength = xc2028_signal, -- cgit v1.2.3-59-g8ed1b From d74cb25e427e2ef979107cbed67d39eba53a6b0f Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 24 Nov 2007 10:20:15 -0300 Subject: V4L/DVB (6672): Add support for radio Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-xc2028.c | 8 ++++++++ drivers/media/video/tuner-xc2028.h | 5 +++-- 2 files changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/tuner-xc2028.c b/drivers/media/video/tuner-xc2028.c index 94f367ab5718..cef170cc2ad8 100644 --- a/drivers/media/video/tuner-xc2028.c +++ b/drivers/media/video/tuner-xc2028.c @@ -891,6 +891,14 @@ static int xc2028_set_analog_freq(struct dvb_frontend *fe, tuner_dbg("%s called\n", __FUNCTION__); + if (p->mode == V4L2_TUNER_RADIO) { + type |= FM; + if (priv->ctrl.input1) + type |= INPUT1; + return generic_set_freq(fe, (625l * p->frequency) / 10, + T_ANALOG_TV, type, 0); + } + /* if std is not defined, choose one */ if (!p->std) p->std = V4L2_STD_MN; diff --git a/drivers/media/video/tuner-xc2028.h b/drivers/media/video/tuner-xc2028.h index a59d00fb2a36..02e116b54592 100644 --- a/drivers/media/video/tuner-xc2028.h +++ b/drivers/media/video/tuner-xc2028.h @@ -15,8 +15,9 @@ struct xc2028_ctrl { char *fname; int max_len; unsigned int scode_table; - unsigned int mts :1; - unsigned int d2633:1; + unsigned int mts :1; + unsigned int d2633 :1; + unsigned int input1:1; }; struct xc2028_config { -- cgit v1.2.3-59-g8ed1b From d04aa54a27f7bc6f051e55c47abbc0a1db1718bc Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 24 Nov 2007 10:47:03 -0300 Subject: V4L/DVB (6674): Add support for other DTV types Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-xc2028.c | 42 ++++++++++++++++++++++++-------------- 1 file changed, 27 insertions(+), 15 deletions(-) diff --git a/drivers/media/video/tuner-xc2028.c b/drivers/media/video/tuner-xc2028.c index cef170cc2ad8..42fb141fc386 100644 --- a/drivers/media/video/tuner-xc2028.c +++ b/drivers/media/video/tuner-xc2028.c @@ -919,35 +919,47 @@ static int xc2028_set_params(struct dvb_frontend *fe, { struct xc2028_data *priv = fe->tuner_priv; unsigned int type=0; - fe_bandwidth_t bw; + fe_bandwidth_t bw = BANDWIDTH_8_MHZ; tuner_dbg("%s called\n", __FUNCTION__); - /* FIXME: Only OFDM implemented */ - if (fe->ops.info.type != FE_OFDM) { - tuner_err("DTV type not implemented.\n"); - return -EINVAL; - } - bw = p->u.ofdm.bandwidth; - - if (bw == BANDWIDTH_7_MHZ || bw == BANDWIDTH_8_MHZ) - type |= F8MHZ; - if (priv->ctrl.d2633) type |= D2633; else type |= D2620; + switch(fe->ops.info.type) { + case FE_QPSK: + break; + case FE_OFDM: + bw = p->u.ofdm.bandwidth; + break; + case FE_QAM: + bw = BANDWIDTH_6_MHZ; + type |= QAM; + break; + case FE_ATSC: + bw = BANDWIDTH_6_MHZ; + type |= ATSC| D2633; + break; + } + + bw = p->u.ofdm.bandwidth; + + /* FIXME: + There are two Scodes that will never be selected: + DTV78 ZARLINK456, DTV78 DIBCOM52 + When it should opt for DTV78 instead of DTV7 or DTV8? + */ switch (bw) { case BANDWIDTH_8_MHZ: - type |= DTV8; + type |= DTV8 | F8MHZ; break; case BANDWIDTH_7_MHZ: - type |= DTV7; + type |= DTV7 | F8MHZ; break; case BANDWIDTH_6_MHZ: - /* FIXME: Should allow select also ATSC */ - type |= DTV6 | QAM; + type |= DTV6 ; break; default: tuner_err("error: bandwidth not supported.\n"); -- cgit v1.2.3-59-g8ed1b From b542dfdc9f6e6eaf3cc2ede27dbaf50425f8b4b5 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 24 Nov 2007 11:07:12 -0300 Subject: V4L/DVB (6675): Allow selecting the proper SCode table for DTV Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-xc2028.c | 18 ++++++++++++++++++ drivers/media/video/tuner-xc2028.h | 15 +++++++++++++++ 2 files changed, 33 insertions(+) diff --git a/drivers/media/video/tuner-xc2028.c b/drivers/media/video/tuner-xc2028.c index 42fb141fc386..9743331c895c 100644 --- a/drivers/media/video/tuner-xc2028.c +++ b/drivers/media/video/tuner-xc2028.c @@ -914,6 +914,19 @@ static int xc2028_set_analog_freq(struct dvb_frontend *fe, T_ANALOG_TV, type, p->std); } +static unsigned int demod_type [] = { + [XC3028_FE_DEFAULT] = 0, + [XC3028_FE_LG60] = LG60, + [XC3028_FE_ATI638] = ATI638, + [XC3028_FE_OREN538] = OREN538, + [XC3028_FE_OREN36] = OREN36, + [XC3028_FE_TOYOTA388] = TOYOTA388, + [XC3028_FE_TOYOTA794] = TOYOTA794, + [XC3028_FE_DIBCOM52] = DIBCOM52, + [XC3028_FE_ZARLINK456] = ZARLINK456, + [XC3028_FE_CHINA] = CHINA, +}; + static int xc2028_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) { @@ -965,6 +978,11 @@ static int xc2028_set_params(struct dvb_frontend *fe, tuner_err("error: bandwidth not supported.\n"); }; + if (priv->ctrl.demod < 0 || priv->ctrl.demod > ARRAY_SIZE(demod_type)) + tuner_err("error: demod type invalid. Assuming default.\n"); + else + type |= demod_type[priv->ctrl.demod]; + return generic_set_freq(fe, p->frequency, T_DIGITAL_TV, type, 0); } diff --git a/drivers/media/video/tuner-xc2028.h b/drivers/media/video/tuner-xc2028.h index 02e116b54592..9b4224e2fe53 100644 --- a/drivers/media/video/tuner-xc2028.h +++ b/drivers/media/video/tuner-xc2028.h @@ -11,6 +11,20 @@ #define XC2028_DEFAULT_FIRMWARE "xc3028-v27.fw" +enum xc2028_demod_types +{ + XC3028_FE_DEFAULT = 0, + XC3028_FE_LG60, /* IF = 6.00 MHz */ + XC3028_FE_ATI638, /* IF = 6.38 MHz */ + XC3028_FE_OREN538, /* IF = 5.38 MHz */ + XC3028_FE_OREN36, /* IF = 3.60 MHz */ + XC3028_FE_TOYOTA388, /* IF = 3.88 MHz */ + XC3028_FE_TOYOTA794, /* IF = 7.94 MHz */ + XC3028_FE_DIBCOM52, /* IF = 5.20 MHz */ + XC3028_FE_ZARLINK456, /* IF = 4.56 MHz */ + XC3028_FE_CHINA, /* IF = 5.20 MHz */ +}; + struct xc2028_ctrl { char *fname; int max_len; @@ -18,6 +32,7 @@ struct xc2028_ctrl { unsigned int mts :1; unsigned int d2633 :1; unsigned int input1:1; + enum xc2028_demod_types demod; }; struct xc2028_config { -- cgit v1.2.3-59-g8ed1b From 66c2d53db28276fe49b49745230b7ac8d8fd5f47 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 25 Nov 2007 19:26:36 -0300 Subject: V4L/DVB (6676): Improve s-code support s-code tables are related to IF frequency used for video demodulation. The s-codes for analog are automatically loaded, according with video standard. However, for digital, they will depend on the IF of the demoduler chip. IF of the demoduler. Before this patch, only a few IF's where possible to use. This patch allows selecting any IF defined at firmware file. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-xc2028-types.h | 3 ++ drivers/media/video/tuner-xc2028.c | 88 ++++++++++++++++++-------------- drivers/media/video/tuner-xc2028.h | 26 +++++----- 3 files changed, 66 insertions(+), 51 deletions(-) diff --git a/drivers/media/video/tuner-xc2028-types.h b/drivers/media/video/tuner-xc2028-types.h index c0dc6ec19f09..d0057fbf0ec7 100644 --- a/drivers/media/video/tuner-xc2028-types.h +++ b/drivers/media/video/tuner-xc2028-types.h @@ -82,6 +82,9 @@ #define INPUT2 (1 << 28) #define SCODE (1 << 29) +/* This flag identifies that the scode table has a new format */ +#define HAS_IF (1 << 30) + #define SCODE_TYPES (MTS|DTV6|QAM|DTV7|DTV78|DTV8|LCD|NOGD|MONO|ATSC|IF| \ LG60|ATI638|OREN538|OREN36|TOYOTA388|TOYOTA794| \ DIBCOM52|ZARLINK456|CHINA|F6MHZ|SCODE) diff --git a/drivers/media/video/tuner-xc2028.c b/drivers/media/video/tuner-xc2028.c index 9743331c895c..cf72f22986a4 100644 --- a/drivers/media/video/tuner-xc2028.c +++ b/drivers/media/video/tuner-xc2028.c @@ -50,6 +50,7 @@ static DEFINE_MUTEX(xc2028_list_mutex); struct firmware_description { unsigned int type; v4l2_std_id id; + __u16 int_freq; unsigned char *ptr; unsigned int size; }; @@ -58,6 +59,7 @@ struct firmware_properties { unsigned int type; v4l2_std_id id; v4l2_std_id std_req; + __u16 int_freq; unsigned int scode_table; int scode_nr; }; @@ -301,6 +303,7 @@ static int load_all_firmwares(struct dvb_frontend *fe) while (p < endp) { __u32 type, size; v4l2_std_id id; + __u16 int_freq = 0; n++; if (n >= n_array) { @@ -321,6 +324,11 @@ static int load_all_firmwares(struct dvb_frontend *fe) id = le64_to_cpu(*(v4l2_std_id *) p); p += sizeof(id); + if (type & HAS_IF) { + int_freq = le16_to_cpu(*(__u16 *) p); + p += sizeof(int_freq); + } + size = le32_to_cpu(*(__u32 *) p); p += sizeof(size); @@ -351,6 +359,7 @@ static int load_all_firmwares(struct dvb_frontend *fe) priv->firm[n].type = type; priv->firm[n].id = id; priv->firm[n].size = size; + priv->firm[n].int_freq = int_freq; p += size; } @@ -565,7 +574,7 @@ static int load_firmware(struct dvb_frontend *fe, unsigned int type, } static int load_scode(struct dvb_frontend *fe, unsigned int type, - v4l2_std_id *id, int scode) + v4l2_std_id *id, __u16 int_freq, int scode) { struct xc2028_data *priv = fe->tuner_priv; int pos, rc; @@ -573,17 +582,34 @@ static int load_scode(struct dvb_frontend *fe, unsigned int type, tuner_dbg("%s called\n", __FUNCTION__); - pos = seek_firmware(fe, type, id); - if (pos < 0) - return pos; + if (!int_freq) { + pos = seek_firmware(fe, type, id); + if (pos < 0) + return pos; + } else { + for (pos = 0; pos < priv->firm_size; pos++) { + if ((priv->firm[pos].int_freq == int_freq) && + (type & HAS_IF)) + break; + } + if (pos == priv->firm_size) + return -ENOENT; + } p = priv->firm[pos].ptr; - /* 16 SCODE entries per file; each SCODE entry is 12 bytes and - * has a 2-byte size header in the firmware format. */ - if (priv->firm[pos].size != 14 * 16 || scode >= 16 || - le16_to_cpu(*(__u16 *)(p + 14 * scode)) != 12) - return -EINVAL; + if (type & HAS_IF) { + if (priv->firm[pos].size != 12 * 16 || scode >= 16) + return -EINVAL; + p += 12 * scode; + } else { + /* 16 SCODE entries per file; each SCODE entry is 12 bytes and + * has a 2-byte size header in the firmware format. */ + if (priv->firm[pos].size != 14 * 16 || scode >= 16 || + le16_to_cpu(*(__u16 *)(p + 14 * scode)) != 12) + return -EINVAL; + p += 14 * scode + 2; + } tuner_info("Loading SCODE for type="); dump_firm_type(priv->firm[pos].type); @@ -597,7 +623,7 @@ static int load_scode(struct dvb_frontend *fe, unsigned int type, if (rc < 0) return -EIO; - rc = i2c_send(priv, p + 14 * scode + 2, 12); + rc = i2c_send(priv, p, 12); if (rc < 0) return -EIO; @@ -609,7 +635,7 @@ static int load_scode(struct dvb_frontend *fe, unsigned int type, } static int check_firmware(struct dvb_frontend *fe, unsigned int type, - v4l2_std_id std) + v4l2_std_id std, __u16 int_freq) { struct xc2028_data *priv = fe->tuner_priv; struct firmware_properties new_fw; @@ -639,6 +665,7 @@ retry: new_fw.std_req = std; new_fw.scode_table = SCODE | priv->ctrl.scode_table; new_fw.scode_nr = 0; + new_fw.int_freq = int_freq; tuner_dbg("checking firmware, user requested type="); if (debug) { @@ -719,8 +746,8 @@ skip_std_specific: /* Load SCODE firmware, if exists */ tuner_dbg("Trying to load scode %d\n", new_fw.scode_nr); - rc = load_scode(fe, new_fw.type | new_fw.scode_table, - &new_fw.id, new_fw.scode_nr); + rc = load_scode(fe, new_fw.type | new_fw.scode_table, &new_fw.id, + new_fw.int_freq, new_fw.scode_nr); check_device: if (xc2028_get_reg(priv, 0x0004, &version) < 0 || @@ -810,9 +837,10 @@ ret: #define DIV 15625 static int generic_set_freq(struct dvb_frontend *fe, u32 freq /* in HZ */, - enum tuner_mode new_mode, - unsigned int type, - v4l2_std_id std) + enum tuner_mode new_mode, + unsigned int type, + v4l2_std_id std, + u16 int_freq) { struct xc2028_data *priv = fe->tuner_priv; int rc = -EINVAL; @@ -825,7 +853,7 @@ static int generic_set_freq(struct dvb_frontend *fe, u32 freq /* in HZ */, tuner_dbg("should set frequency %d kHz\n", freq / 1000); - if (check_firmware(fe, type, std) < 0) + if (check_firmware(fe, type, std, int_freq) < 0) goto ret; /* On some cases xc2028 can disable video output, if @@ -896,7 +924,7 @@ static int xc2028_set_analog_freq(struct dvb_frontend *fe, if (priv->ctrl.input1) type |= INPUT1; return generic_set_freq(fe, (625l * p->frequency) / 10, - T_ANALOG_TV, type, 0); + T_ANALOG_TV, type, 0, 0); } /* if std is not defined, choose one */ @@ -911,22 +939,9 @@ static int xc2028_set_analog_freq(struct dvb_frontend *fe, p->std |= parse_audio_std_option(); return generic_set_freq(fe, 62500l * p->frequency, - T_ANALOG_TV, type, p->std); + T_ANALOG_TV, type, p->std, 0); } -static unsigned int demod_type [] = { - [XC3028_FE_DEFAULT] = 0, - [XC3028_FE_LG60] = LG60, - [XC3028_FE_ATI638] = ATI638, - [XC3028_FE_OREN538] = OREN538, - [XC3028_FE_OREN36] = OREN36, - [XC3028_FE_TOYOTA388] = TOYOTA388, - [XC3028_FE_TOYOTA794] = TOYOTA794, - [XC3028_FE_DIBCOM52] = DIBCOM52, - [XC3028_FE_ZARLINK456] = ZARLINK456, - [XC3028_FE_CHINA] = CHINA, -}; - static int xc2028_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) { @@ -978,13 +993,12 @@ static int xc2028_set_params(struct dvb_frontend *fe, tuner_err("error: bandwidth not supported.\n"); }; - if (priv->ctrl.demod < 0 || priv->ctrl.demod > ARRAY_SIZE(demod_type)) - tuner_err("error: demod type invalid. Assuming default.\n"); - else - type |= demod_type[priv->ctrl.demod]; + /* All S-code tables need a 200kHz shift */ + if (priv->ctrl.demod) + priv->ctrl.demod += 200; return generic_set_freq(fe, p->frequency, - T_DIGITAL_TV, type, 0); + T_DIGITAL_TV, type, 0, priv->ctrl.demod); } static int xc2028_sleep(struct dvb_frontend *fe) diff --git a/drivers/media/video/tuner-xc2028.h b/drivers/media/video/tuner-xc2028.h index 9b4224e2fe53..1fe8b195960c 100644 --- a/drivers/media/video/tuner-xc2028.h +++ b/drivers/media/video/tuner-xc2028.h @@ -11,19 +11,17 @@ #define XC2028_DEFAULT_FIRMWARE "xc3028-v27.fw" -enum xc2028_demod_types -{ - XC3028_FE_DEFAULT = 0, - XC3028_FE_LG60, /* IF = 6.00 MHz */ - XC3028_FE_ATI638, /* IF = 6.38 MHz */ - XC3028_FE_OREN538, /* IF = 5.38 MHz */ - XC3028_FE_OREN36, /* IF = 3.60 MHz */ - XC3028_FE_TOYOTA388, /* IF = 3.88 MHz */ - XC3028_FE_TOYOTA794, /* IF = 7.94 MHz */ - XC3028_FE_DIBCOM52, /* IF = 5.20 MHz */ - XC3028_FE_ZARLINK456, /* IF = 4.56 MHz */ - XC3028_FE_CHINA, /* IF = 5.20 MHz */ -}; +/* Dmoduler IF (kHz) */ +#define XC3028_FE_DEFAULT 0 +#define XC3028_FE_LG60 6000 +#define XC3028_FE_ATI638 6380 +#define XC3028_FE_OREN538 5380 +#define XC3028_FE_OREN36 3600 +#define XC3028_FE_TOYOTA388 3880 +#define XC3028_FE_TOYOTA794 7940 +#define XC3028_FE_DIBCOM52 5200 +#define XC3028_FE_ZARLINK456 4560 +#define XC3028_FE_CHINA 5200 struct xc2028_ctrl { char *fname; @@ -32,7 +30,7 @@ struct xc2028_ctrl { unsigned int mts :1; unsigned int d2633 :1; unsigned int input1:1; - enum xc2028_demod_types demod; + unsigned int demod; }; struct xc2028_config { -- cgit v1.2.3-59-g8ed1b From 63806eeb61dcdf30fdbf488babff98aea2ca3f08 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 25 Nov 2007 19:29:22 -0300 Subject: V4L/DVB (6677): Fix xc2028 driver for non OFDM A previous patch implemented support for non-OFDM digital TV. However, the previous bandwidth ofdm parameter were left at the code by mistake. Thanks to Michael Krufky and Patrick Boettcher for noticing this mistake. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-xc2028.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/media/video/tuner-xc2028.c b/drivers/media/video/tuner-xc2028.c index cf72f22986a4..e1796ebb7c71 100644 --- a/drivers/media/video/tuner-xc2028.c +++ b/drivers/media/video/tuner-xc2028.c @@ -972,8 +972,6 @@ static int xc2028_set_params(struct dvb_frontend *fe, break; } - bw = p->u.ofdm.bandwidth; - /* FIXME: There are two Scodes that will never be selected: DTV78 ZARLINK456, DTV78 DIBCOM52 -- cgit v1.2.3-59-g8ed1b From 22ee1250bd41534552c61be13994fd12d1ee1318 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Thu, 22 Nov 2007 17:13:00 -0300 Subject: V4L/DVB (6678): tda18271: define init callback Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271.c b/drivers/media/dvb/frontends/tda18271.c index aaaa2f885186..ad72ff69ce92 100644 --- a/drivers/media/dvb/frontends/tda18271.c +++ b/drivers/media/dvb/frontends/tda18271.c @@ -429,17 +429,11 @@ static void tda18271_write_regs(struct dvb_frontend *fe, int idx, int len) /*---------------------------------------------------------------------*/ -static void tda18271_init_regs(struct dvb_frontend *fe) +static int tda18271_init_regs(struct dvb_frontend *fe) { struct tda18271_priv *priv = fe->tuner_priv; unsigned char *regs = priv->tda18271_regs; - tda18271_read_regs(fe); - - /* test IR_CAL_OK to see if we need init */ - if ((regs[R_EP1] & 0x08) != 0) - return; - printk(KERN_INFO "tda18271: initializing registers\n"); /* initialize registers */ @@ -616,6 +610,8 @@ static void tda18271_init_regs(struct dvb_frontend *fe) regs[R_EP1] = 0xc6; tda18271_write_regs(fe, R_EP1, 1); + + return 0; } static int tda18271_tune(struct dvb_frontend *fe, @@ -626,10 +622,15 @@ static int tda18271_tune(struct dvb_frontend *fe, u32 div, N = 0; int i; + tda18271_read_regs(fe); + + /* test IR_CAL_OK to see if we need init */ + if ((regs[R_EP1] & 0x08) == 0) + tda18271_init_regs(fe); + dprintk(1, "freq = %d, ifc = %d\n", freq, ifc); - tda18271_init_regs(fe); /* RF tracking filter calibration */ /* calculate BP_Filter */ @@ -1024,6 +1025,7 @@ static struct dvb_tuner_ops tda18271_tuner_ops = { .frequency_max = 864000000, .frequency_step = 62500 }, + .init = tda18271_init_regs, .set_params = tda18271_set_params, .set_analog_params = tda18271_set_analog_params, .release = tda18271_release, -- cgit v1.2.3-59-g8ed1b From 63c254805e38bad4c64b5f5b0e135a2a357fa0bf Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Fri, 23 Nov 2007 15:08:11 -0300 Subject: V4L/DVB (6679): tda8290: force tuner init after attach Force tuner init after attach, then sleep until use. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tda8290.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/media/video/tda8290.c b/drivers/media/video/tda8290.c index c606f3c38cf4..09efb6a60dbc 100644 --- a/drivers/media/video/tda8290.c +++ b/drivers/media/video/tda8290.c @@ -597,13 +597,13 @@ static int tda829x_find_tuner(struct dvb_frontend *fe) tda827x_attach(&t->fe, priv->tda827x_addr, priv->i2c_props.adap, &priv->cfg); - - /* FIXME: tda827x module doesn't probe the tuner until - * tda827x_initial_sleep is called - */ - if (t->fe.ops.tuner_ops.sleep) - t->fe.ops.tuner_ops.sleep(&t->fe); } + if (t->fe.ops.tuner_ops.init) + t->fe.ops.tuner_ops.init(&t->fe); + + if (t->fe.ops.tuner_ops.sleep) + t->fe.ops.tuner_ops.sleep(&t->fe); + ops->i2c_gate_ctrl(fe, 0); switch (priv->ver) { -- cgit v1.2.3-59-g8ed1b From 6ca04de36b05aaf2f8122d0e566940969c6df801 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Fri, 23 Nov 2007 16:52:15 -0300 Subject: V4L/DVB (6680): tda18271: move tda18271_map tables to a separate source file Move tda18271_map tables to a separate source file, to improve code readability and ease maintenance. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/Makefile | 2 + drivers/media/dvb/frontends/tda18271-fe.c | 784 ++++++++++++++++++ drivers/media/dvb/frontends/tda18271-priv.h | 96 +++ drivers/media/dvb/frontends/tda18271-tables.c | 253 ++++++ drivers/media/dvb/frontends/tda18271.c | 1067 ------------------------- 5 files changed, 1135 insertions(+), 1067 deletions(-) create mode 100644 drivers/media/dvb/frontends/tda18271-fe.c create mode 100644 drivers/media/dvb/frontends/tda18271-priv.h create mode 100644 drivers/media/dvb/frontends/tda18271-tables.c delete mode 100644 drivers/media/dvb/frontends/tda18271.c diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index 57e5fa80589b..784565208fb4 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -5,6 +5,8 @@ EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ EXTRA_CFLAGS += -Idrivers/media/video/ +tda18271-objs := tda18271-tables.o tda18271-fe.o + obj-$(CONFIG_DVB_PLL) += dvb-pll.o obj-$(CONFIG_DVB_STV0299) += stv0299.o obj-$(CONFIG_DVB_SP8870) += sp8870.o diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c new file mode 100644 index 000000000000..ba980cf5811b --- /dev/null +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -0,0 +1,784 @@ +/* + tda18271-fe.c - driver for the Philips / NXP TDA18271 silicon tuner + + Copyright (C) 2007 Michael Krufky (mkrufky@linuxtv.org) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include +#include +#include "tuner-driver.h" + +#include "tda18271.h" +#include "tda18271-priv.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +#define dprintk(level, fmt, arg...) do {\ + if (debug >= level) \ + printk(KERN_DEBUG "%s: " fmt, __FUNCTION__, ##arg); } while (0) + +/*---------------------------------------------------------------------*/ + +#define TDA18271_ANALOG 0 +#define TDA18271_DIGITAL 1 + +struct tda18271_priv { + u8 i2c_addr; + struct i2c_adapter *i2c_adap; + unsigned char tda18271_regs[TDA18271_NUM_REGS]; + int mode; + + u32 frequency; + u32 bandwidth; +}; + +static int tda18271_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct tda18271_priv *priv = fe->tuner_priv; + struct analog_tuner_ops *ops = fe->ops.analog_demod_ops; + int ret = 0; + + switch (priv->mode) { + case TDA18271_ANALOG: + if (ops && ops->i2c_gate_ctrl) + ret = ops->i2c_gate_ctrl(fe, enable); + break; + case TDA18271_DIGITAL: + if (fe->ops.i2c_gate_ctrl) + ret = fe->ops.i2c_gate_ctrl(fe, enable); + break; + } + + return ret; +}; + +/*---------------------------------------------------------------------*/ + +static void tda18271_dump_regs(struct dvb_frontend *fe) +{ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + + dprintk(1, "=== TDA18271 REG DUMP ===\n"); + dprintk(1, "ID_BYTE = 0x%x\n", 0xff & regs[R_ID]); + dprintk(1, "THERMO_BYTE = 0x%x\n", 0xff & regs[R_TM]); + dprintk(1, "POWER_LEVEL_BYTE = 0x%x\n", 0xff & regs[R_PL]); + dprintk(1, "EASY_PROG_BYTE_1 = 0x%x\n", 0xff & regs[R_EP1]); + dprintk(1, "EASY_PROG_BYTE_2 = 0x%x\n", 0xff & regs[R_EP2]); + dprintk(1, "EASY_PROG_BYTE_3 = 0x%x\n", 0xff & regs[R_EP3]); + dprintk(1, "EASY_PROG_BYTE_4 = 0x%x\n", 0xff & regs[R_EP4]); + dprintk(1, "EASY_PROG_BYTE_5 = 0x%x\n", 0xff & regs[R_EP5]); + dprintk(1, "CAL_POST_DIV_BYTE = 0x%x\n", 0xff & regs[R_CPD]); + dprintk(1, "CAL_DIV_BYTE_1 = 0x%x\n", 0xff & regs[R_CD1]); + dprintk(1, "CAL_DIV_BYTE_2 = 0x%x\n", 0xff & regs[R_CD2]); + dprintk(1, "CAL_DIV_BYTE_3 = 0x%x\n", 0xff & regs[R_CD3]); + dprintk(1, "MAIN_POST_DIV_BYTE = 0x%x\n", 0xff & regs[R_MPD]); + dprintk(1, "MAIN_DIV_BYTE_1 = 0x%x\n", 0xff & regs[R_MD1]); + dprintk(1, "MAIN_DIV_BYTE_2 = 0x%x\n", 0xff & regs[R_MD2]); + dprintk(1, "MAIN_DIV_BYTE_3 = 0x%x\n", 0xff & regs[R_MD3]); +} + +static void tda18271_read_regs(struct dvb_frontend *fe) +{ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + unsigned char buf = 0x00; + int ret; + struct i2c_msg msg[] = { + { .addr = priv->i2c_addr, .flags = 0, + .buf = &buf, .len = 1 }, + { .addr = priv->i2c_addr, .flags = I2C_M_RD, + .buf = regs, .len = 16 } + }; + + tda18271_i2c_gate_ctrl(fe, 1); + + /* read all registers */ + ret = i2c_transfer(priv->i2c_adap, msg, 2); + + tda18271_i2c_gate_ctrl(fe, 0); + + if (ret != 2) + printk("ERROR: %s: i2c_transfer returned: %d\n", + __FUNCTION__, ret); + + if (debug > 2) + tda18271_dump_regs(fe); +} + +static void tda18271_write_regs(struct dvb_frontend *fe, int idx, int len) +{ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + unsigned char buf[TDA18271_NUM_REGS+1]; + struct i2c_msg msg = { .addr = priv->i2c_addr, .flags = 0, + .buf = buf, .len = len+1 }; + int i, ret; + + BUG_ON((len == 0) || (idx+len > sizeof(buf))); + + buf[0] = idx; + for (i = 1; i <= len; i++) { + buf[i] = regs[idx-1+i]; + } + + tda18271_i2c_gate_ctrl(fe, 1); + + /* write registers */ + ret = i2c_transfer(priv->i2c_adap, &msg, 1); + + tda18271_i2c_gate_ctrl(fe, 0); + + if (ret != 1) + printk(KERN_WARNING "ERROR: %s: i2c_transfer returned: %d\n", + __FUNCTION__, ret); +} + +/*---------------------------------------------------------------------*/ + +static int tda18271_init_regs(struct dvb_frontend *fe) +{ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + + printk(KERN_INFO "tda18271: initializing registers\n"); + + /* initialize registers */ + regs[R_ID] = 0x83; + regs[R_TM] = 0x08; + regs[R_PL] = 0x80; + regs[R_EP1] = 0xc6; + regs[R_EP2] = 0xdf; + regs[R_EP3] = 0x16; + regs[R_EP4] = 0x60; + regs[R_EP5] = 0x80; + regs[R_CPD] = 0x80; + regs[R_CD1] = 0x00; + regs[R_CD2] = 0x00; + regs[R_CD3] = 0x00; + regs[R_MPD] = 0x00; + regs[R_MD1] = 0x00; + regs[R_MD2] = 0x00; + regs[R_MD3] = 0x00; + regs[R_EB1] = 0xff; + regs[R_EB2] = 0x01; + regs[R_EB3] = 0x84; + regs[R_EB4] = 0x41; + regs[R_EB5] = 0x01; + regs[R_EB6] = 0x84; + regs[R_EB7] = 0x40; + regs[R_EB8] = 0x07; + regs[R_EB9] = 0x00; + regs[R_EB10] = 0x00; + regs[R_EB11] = 0x96; + regs[R_EB12] = 0x0f; + regs[R_EB13] = 0xc1; + regs[R_EB14] = 0x00; + regs[R_EB15] = 0x8f; + regs[R_EB16] = 0x00; + regs[R_EB17] = 0x00; + regs[R_EB18] = 0x00; + regs[R_EB19] = 0x00; + regs[R_EB20] = 0x20; + regs[R_EB21] = 0x33; + regs[R_EB22] = 0x48; + regs[R_EB23] = 0xb0; + + tda18271_write_regs(fe, 0x00, TDA18271_NUM_REGS); + /* setup AGC1 & AGC2 */ + regs[R_EB17] = 0x00; + tda18271_write_regs(fe, R_EB17, 1); + regs[R_EB17] = 0x03; + tda18271_write_regs(fe, R_EB17, 1); + regs[R_EB17] = 0x43; + tda18271_write_regs(fe, R_EB17, 1); + regs[R_EB17] = 0x4c; + tda18271_write_regs(fe, R_EB17, 1); + + regs[R_EB20] = 0xa0; + tda18271_write_regs(fe, R_EB20, 1); + regs[R_EB20] = 0xa7; + tda18271_write_regs(fe, R_EB20, 1); + regs[R_EB20] = 0xe7; + tda18271_write_regs(fe, R_EB20, 1); + regs[R_EB20] = 0xec; + tda18271_write_regs(fe, R_EB20, 1); + + /* image rejection calibration */ + + /* low-band */ + regs[R_EP3] = 0x1f; + regs[R_EP4] = 0x66; + regs[R_EP5] = 0x81; + regs[R_CPD] = 0xcc; + regs[R_CD1] = 0x6c; + regs[R_CD2] = 0x00; + regs[R_CD3] = 0x00; + regs[R_MPD] = 0xcd; + regs[R_MD1] = 0x77; + regs[R_MD2] = 0x08; + regs[R_MD3] = 0x00; + + tda18271_write_regs(fe, R_EP3, 11); + msleep(5); /* pll locking */ + + regs[R_EP1] = 0xc6; + tda18271_write_regs(fe, R_EP1, 1); + msleep(5); /* wanted low measurement */ + + regs[R_EP3] = 0x1f; + regs[R_EP4] = 0x66; + regs[R_EP5] = 0x85; + regs[R_CPD] = 0xcb; + regs[R_CD1] = 0x66; + regs[R_CD2] = 0x70; + regs[R_CD3] = 0x00; + + tda18271_write_regs(fe, R_EP3, 7); + msleep(5); /* pll locking */ + + regs[R_EP2] = 0xdf; + tda18271_write_regs(fe, R_EP2, 1); + msleep(30); /* image low optimization completion */ + + /* mid-band */ + regs[R_EP3] = 0x1f; + regs[R_EP4] = 0x66; + regs[R_EP5] = 0x82; + regs[R_CPD] = 0xa8; + regs[R_CD1] = 0x66; + regs[R_CD2] = 0x00; + regs[R_CD3] = 0x00; + regs[R_MPD] = 0xa9; + regs[R_MD1] = 0x73; + regs[R_MD2] = 0x1a; + regs[R_MD3] = 0x00; + + tda18271_write_regs(fe, R_EP3, 11); + msleep(5); /* pll locking */ + + regs[R_EP1] = 0xc6; + tda18271_write_regs(fe, R_EP1, 1); + msleep(5); /* wanted mid measurement */ + + regs[R_EP3] = 0x1f; + regs[R_EP4] = 0x66; + regs[R_EP5] = 0x86; + regs[R_CPD] = 0xa8; + regs[R_CD1] = 0x66; + regs[R_CD2] = 0xa0; + regs[R_CD3] = 0x00; + + tda18271_write_regs(fe, R_EP3, 7); + msleep(5); /* pll locking */ + + regs[R_EP2] = 0xdf; + tda18271_write_regs(fe, R_EP2, 1); + msleep(30); /* image mid optimization completion */ + + /* high-band */ + regs[R_EP3] = 0x1f; + regs[R_EP4] = 0x66; + regs[R_EP5] = 0x83; + regs[R_CPD] = 0x98; + regs[R_CD1] = 0x65; + regs[R_CD2] = 0x00; + regs[R_CD3] = 0x00; + regs[R_MPD] = 0x99; + regs[R_MD1] = 0x71; + regs[R_MD2] = 0xcd; + regs[R_MD3] = 0x00; + + tda18271_write_regs(fe, R_EP3, 11); + msleep(5); /* pll locking */ + + regs[R_EP1] = 0xc6; + tda18271_write_regs(fe, R_EP1, 1); + msleep(5); /* wanted high measurement */ + + regs[R_EP3] = 0x1f; + regs[R_EP4] = 0x66; + regs[R_EP5] = 0x87; + regs[R_CPD] = 0x98; + regs[R_CD1] = 0x65; + regs[R_CD2] = 0x50; + regs[R_CD3] = 0x00; + + tda18271_write_regs(fe, R_EP3, 7); + msleep(5); /* pll locking */ + + regs[R_EP2] = 0xdf; + + tda18271_write_regs(fe, R_EP2, 1); + msleep(30); /* image high optimization completion */ + + regs[R_EP4] = 0x64; + tda18271_write_regs(fe, R_EP4, 1); + + regs[R_EP1] = 0xc6; + tda18271_write_regs(fe, R_EP1, 1); + + return 0; +} + +static int tda18271_tune(struct dvb_frontend *fe, + u32 ifc, u32 freq, u32 bw, u8 std) +{ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + u32 div, N = 0; + int i; + + tda18271_read_regs(fe); + + /* test IR_CAL_OK to see if we need init */ + if ((regs[R_EP1] & 0x08) == 0) + tda18271_init_regs(fe); + + + dprintk(1, "freq = %d, ifc = %d\n", freq, ifc); + + /* RF tracking filter calibration */ + + /* calculate BP_Filter */ + i = 0; + while ((tda18271_bp_filter[i].rfmax * 1000) < freq) { + if (tda18271_bp_filter[i + 1].rfmax == 0) + break; + i++; + } + dprintk(2, "bp filter = 0x%x, i = %d\n", tda18271_bp_filter[i].val, i); + + regs[R_EP1] &= ~0x07; /* clear bp filter bits */ + regs[R_EP1] |= tda18271_bp_filter[i].val; + tda18271_write_regs(fe, R_EP1, 1); + + regs[R_EB4] &= 0x07; + regs[R_EB4] |= 0x60; + tda18271_write_regs(fe, R_EB4, 1); + + regs[R_EB7] = 0x60; + tda18271_write_regs(fe, R_EB7, 1); + + regs[R_EB14] = 0x00; + tda18271_write_regs(fe, R_EB14, 1); + + regs[R_EB20] = 0xcc; + tda18271_write_regs(fe, R_EB20, 1); + + /* set CAL mode to RF tracking filter calibration */ + regs[R_EB4] |= 0x03; + + /* calculate CAL PLL */ + + switch (priv->mode) { + case TDA18271_ANALOG: + N = freq - 1250000; + break; + case TDA18271_DIGITAL: + N = freq + bw / 2; + break; + } + + i = 0; + while ((tda18271_cal_pll[i].lomax * 1000) < N) { + if (tda18271_cal_pll[i + 1].lomax == 0) + break; + i++; + } + dprintk(2, "cal pll, pd = 0x%x, d = 0x%x, i = %d\n", + tda18271_cal_pll[i].pd, tda18271_cal_pll[i].d, i); + + regs[R_CPD] = tda18271_cal_pll[i].pd; + + div = ((tda18271_cal_pll[i].d * (N / 1000)) << 7) / 125; + regs[R_CD1] = 0xff & (div >> 16); + regs[R_CD2] = 0xff & (div >> 8); + regs[R_CD3] = 0xff & div; + + /* calculate MAIN PLL */ + + switch (priv->mode) { + case TDA18271_ANALOG: + N = freq - 250000; + break; + case TDA18271_DIGITAL: + N = freq + bw / 2 + 1000000; + break; + } + + i = 0; + while ((tda18271_main_pll[i].lomax * 1000) < N) { + if (tda18271_main_pll[i + 1].lomax == 0) + break; + i++; + } + dprintk(2, "main pll, pd = 0x%x, d = 0x%x, i = %d\n", + tda18271_main_pll[i].pd, tda18271_main_pll[i].d, i); + + regs[R_MPD] = (0x7f & tda18271_main_pll[i].pd); + + switch (priv->mode) { + case TDA18271_ANALOG: + regs[R_MPD] &= ~0x08; + break; + case TDA18271_DIGITAL: + regs[R_MPD] |= 0x08; + break; + } + + div = ((tda18271_main_pll[i].d * (N / 1000)) << 7) / 125; + regs[R_MD1] = 0xff & (div >> 16); + regs[R_MD2] = 0xff & (div >> 8); + regs[R_MD3] = 0xff & div; + + tda18271_write_regs(fe, R_EP3, 11); + msleep(5); /* RF tracking filter calibration initialization */ + + /* search for K,M,CO for RF Calibration */ + i = 0; + while ((tda18271_km[i].rfmax * 1000) < freq) { + if (tda18271_km[i + 1].rfmax == 0) + break; + i++; + } + dprintk(2, "km = 0x%x, i = %d\n", tda18271_km[i].val, i); + + regs[R_EB13] &= 0x83; + regs[R_EB13] |= tda18271_km[i].val; + tda18271_write_regs(fe, R_EB13, 1); + + /* search for RF_BAND */ + i = 0; + while ((tda18271_rf_band[i].rfmax * 1000) < freq) { + if (tda18271_rf_band[i + 1].rfmax == 0) + break; + i++; + } + dprintk(2, "rf band = 0x%x, i = %d\n", tda18271_rf_band[i].val, i); + + regs[R_EP2] &= ~0xe0; /* clear rf band bits */ + regs[R_EP2] |= (tda18271_rf_band[i].val << 5); + + /* search for Gain_Taper */ + i = 0; + while ((tda18271_gain_taper[i].rfmax * 1000) < freq) { + if (tda18271_gain_taper[i + 1].rfmax == 0) + break; + i++; + } + dprintk(2, "gain taper = 0x%x, i = %d\n", + tda18271_gain_taper[i].val, i); + + regs[R_EP2] &= ~0x1f; /* clear gain taper bits */ + regs[R_EP2] |= tda18271_gain_taper[i].val; + + tda18271_write_regs(fe, R_EP2, 1); + tda18271_write_regs(fe, R_EP1, 1); + tda18271_write_regs(fe, R_EP2, 1); + tda18271_write_regs(fe, R_EP1, 1); + + regs[R_EB4] &= 0x07; + regs[R_EB4] |= 0x40; + tda18271_write_regs(fe, R_EB4, 1); + + regs[R_EB7] = 0x40; + tda18271_write_regs(fe, R_EB7, 1); + msleep(10); + + regs[R_EB20] = 0xec; + tda18271_write_regs(fe, R_EB20, 1); + msleep(60); /* RF tracking filter calibration completion */ + + regs[R_EP4] &= ~0x03; /* set cal mode to normal */ + tda18271_write_regs(fe, R_EP4, 1); + + tda18271_write_regs(fe, R_EP1, 1); + + /* RF tracking filer correction for VHF_Low band */ + i = 0; + while ((tda18271_rf_cal[i].rfmax * 1000) < freq) { + if (tda18271_rf_cal[i].rfmax == 0) + break; + i++; + } + dprintk(2, "rf cal = 0x%x, i = %d\n", tda18271_rf_cal[i].val, i); + + /* VHF_Low band only */ + if (tda18271_rf_cal[i].rfmax != 0) { + regs[R_EB14] = tda18271_rf_cal[i].val; + tda18271_write_regs(fe, R_EB14, 1); + } + + /* Channel Configuration */ + + switch (priv->mode) { + case TDA18271_ANALOG: + regs[R_EB22] = 0x2c; + break; + case TDA18271_DIGITAL: + regs[R_EB22] = 0x37; + break; + } + tda18271_write_regs(fe, R_EB22, 1); + + regs[R_EP1] |= 0x40; /* set dis power level on */ + + /* set standard */ + regs[R_EP3] &= ~0x1f; /* clear std bits */ + + /* see table 22 */ + regs[R_EP3] |= std; + + regs[R_EP4] &= ~0x03; /* set cal mode to normal */ + + regs[R_EP4] &= ~0x1c; /* clear if level bits */ + switch (priv->mode) { + case TDA18271_ANALOG: + regs[R_MPD] &= ~0x80; /* IF notch = 0 */ + break; + case TDA18271_DIGITAL: + regs[R_EP4] |= 0x04; + regs[R_MPD] |= 0x80; + break; + } + + regs[R_EP4] &= ~0x80; /* turn this bit on only for fm */ + + /* FIXME: image rejection validity EP5[2:0] */ + + /* calculate MAIN PLL */ + N = freq + ifc; + + i = 0; + while ((tda18271_main_pll[i].lomax * 1000) < N) { + if (tda18271_main_pll[i + 1].lomax == 0) + break; + i++; + } + dprintk(2, "main pll, pd = 0x%x, d = 0x%x, i = %d\n", + tda18271_main_pll[i].pd, tda18271_main_pll[i].d, i); + + regs[R_MPD] = (0x7f & tda18271_main_pll[i].pd); + switch (priv->mode) { + case TDA18271_ANALOG: + regs[R_MPD] &= ~0x08; + break; + case TDA18271_DIGITAL: + regs[R_MPD] |= 0x08; + break; + } + + div = ((tda18271_main_pll[i].d * (N / 1000)) << 7) / 125; + regs[R_MD1] = 0xff & (div >> 16); + regs[R_MD2] = 0xff & (div >> 8); + regs[R_MD3] = 0xff & div; + + tda18271_write_regs(fe, R_TM, 15); + msleep(5); + + return 0; +} + +/* ------------------------------------------------------------------ */ + +static int tda18271_set_params(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params) +{ + struct tda18271_priv *priv = fe->tuner_priv; + u8 std; + u32 bw, sgIF = 0; + + u32 freq = params->frequency; + + priv->mode = TDA18271_DIGITAL; + + /* see table 22 */ + if (fe->ops.info.type == FE_ATSC) { + switch (params->u.vsb.modulation) { + case VSB_8: + case VSB_16: + std = 0x1b; /* device-specific (spec says 0x1c) */ + sgIF = 5380000; + break; + case QAM_64: + case QAM_256: + std = 0x18; /* device-specific (spec says 0x1d) */ + sgIF = 4000000; + break; + default: + printk(KERN_WARNING "%s: modulation not set!\n", + __FUNCTION__); + return -EINVAL; + } + freq += 1750000; /* Adjust to center (+1.75MHZ) */ + bw = 6000000; + } else if (fe->ops.info.type == FE_OFDM) { + switch (params->u.ofdm.bandwidth) { + case BANDWIDTH_6_MHZ: + std = 0x1b; /* device-specific (spec says 0x1c) */ + bw = 6000000; + sgIF = 3300000; + break; + case BANDWIDTH_7_MHZ: + std = 0x19; /* device-specific (spec says 0x1d) */ + bw = 7000000; + sgIF = 3800000; + break; + case BANDWIDTH_8_MHZ: + std = 0x1a; /* device-specific (spec says 0x1e) */ + bw = 8000000; + sgIF = 4300000; + break; + default: + printk(KERN_WARNING "%s: bandwidth not set!\n", + __FUNCTION__); + return -EINVAL; + } + } else { + printk(KERN_WARNING "%s: modulation type not supported!\n", + __FUNCTION__); + return -EINVAL; + } + + return tda18271_tune(fe, sgIF, freq, bw, std); +} + +static int tda18271_set_analog_params(struct dvb_frontend *fe, + struct analog_parameters *params) +{ + struct tda18271_priv *priv = fe->tuner_priv; + u8 std; + unsigned int sgIF; + char *mode; + + priv->mode = TDA18271_ANALOG; + + /* see table 22 */ + if (params->std & V4L2_STD_MN) { + std = 0x0d; + sgIF = 92; + mode = "MN"; + } else if (params->std & V4L2_STD_B) { + std = 0x0e; + sgIF = 108; + mode = "B"; + } else if (params->std & V4L2_STD_GH) { + std = 0x0f; + sgIF = 124; + mode = "GH"; + } else if (params->std & V4L2_STD_PAL_I) { + std = 0x0f; + sgIF = 124; + mode = "I"; + } else if (params->std & V4L2_STD_DK) { + std = 0x0f; + sgIF = 124; + mode = "DK"; + } else if (params->std & V4L2_STD_SECAM_L) { + std = 0x0f; + sgIF = 124; + mode = "L"; + } else if (params->std & V4L2_STD_SECAM_LC) { + std = 0x0f; + sgIF = 20; + mode = "LC"; + } else { + std = 0x0f; + sgIF = 124; + mode = "xx"; + } + + if (params->mode == V4L2_TUNER_RADIO) + sgIF = 88; /* if frequency is 5.5 MHz */ + + dprintk(1, "setting tda18271 to system %s\n", mode); + + return tda18271_tune(fe, sgIF * 62500, params->frequency * 62500, + 0, std); +} + +static int tda18271_release(struct dvb_frontend *fe) +{ + kfree(fe->tuner_priv); + fe->tuner_priv = NULL; + return 0; +} + +static int tda18271_get_frequency(struct dvb_frontend *fe, u32 *frequency) +{ + struct tda18271_priv *priv = fe->tuner_priv; + *frequency = priv->frequency; + return 0; +} + +static int tda18271_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) +{ + struct tda18271_priv *priv = fe->tuner_priv; + *bandwidth = priv->bandwidth; + return 0; +} + +static struct dvb_tuner_ops tda18271_tuner_ops = { + .info = { + .name = "NXP TDA18271HD", + .frequency_min = 45000000, + .frequency_max = 864000000, + .frequency_step = 62500 + }, + .init = tda18271_init_regs, + .set_params = tda18271_set_params, + .set_analog_params = tda18271_set_analog_params, + .release = tda18271_release, + .get_frequency = tda18271_get_frequency, + .get_bandwidth = tda18271_get_bandwidth, +}; + +struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, + struct i2c_adapter *i2c) +{ + struct tda18271_priv *priv = NULL; + + dprintk(1, "@ %d-%04x\n", i2c_adapter_id(i2c), addr); + priv = kzalloc(sizeof(struct tda18271_priv), GFP_KERNEL); + if (priv == NULL) + return NULL; + + priv->i2c_addr = addr; + priv->i2c_adap = i2c; + + memcpy(&fe->ops.tuner_ops, &tda18271_tuner_ops, + sizeof(struct dvb_tuner_ops)); + + fe->tuner_priv = priv; + + return fe; +} +EXPORT_SYMBOL_GPL(tda18271_attach); +MODULE_DESCRIPTION("NXP TDA18271HD analog / digital tuner driver"); +MODULE_AUTHOR("Michael Krufky "); +MODULE_LICENSE("GPL"); + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * --------------------------------------------------------------------------- + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/dvb/frontends/tda18271-priv.h b/drivers/media/dvb/frontends/tda18271-priv.h new file mode 100644 index 000000000000..71b4d7963699 --- /dev/null +++ b/drivers/media/dvb/frontends/tda18271-priv.h @@ -0,0 +1,96 @@ +/* + tda18271-priv.h - private header for the NXP TDA18271 silicon tuner + + Copyright (C) 2007 Michael Krufky (mkrufky@linuxtv.org) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __TDA18271_PRIV_H__ +#define __TDA18271_PRIV_H__ + +#include + +#define R_ID 0x00 /* ID byte */ +#define R_TM 0x01 /* Thermo byte */ +#define R_PL 0x02 /* Power level byte */ +#define R_EP1 0x03 /* Easy Prog byte 1 */ +#define R_EP2 0x04 /* Easy Prog byte 2 */ +#define R_EP3 0x05 /* Easy Prog byte 3 */ +#define R_EP4 0x06 /* Easy Prog byte 4 */ +#define R_EP5 0x07 /* Easy Prog byte 5 */ +#define R_CPD 0x08 /* Cal Post-Divider byte */ +#define R_CD1 0x09 /* Cal Divider byte 1 */ +#define R_CD2 0x0a /* Cal Divider byte 2 */ +#define R_CD3 0x0b /* Cal Divider byte 3 */ +#define R_MPD 0x0c /* Main Post-Divider byte */ +#define R_MD1 0x0d /* Main Divider byte 1 */ +#define R_MD2 0x0e /* Main Divider byte 2 */ +#define R_MD3 0x0f /* Main Divider byte 3 */ +#define R_EB1 0x10 /* Extended byte 1 */ +#define R_EB2 0x11 /* Extended byte 2 */ +#define R_EB3 0x12 /* Extended byte 3 */ +#define R_EB4 0x13 /* Extended byte 4 */ +#define R_EB5 0x14 /* Extended byte 5 */ +#define R_EB6 0x15 /* Extended byte 6 */ +#define R_EB7 0x16 /* Extended byte 7 */ +#define R_EB8 0x17 /* Extended byte 8 */ +#define R_EB9 0x18 /* Extended byte 9 */ +#define R_EB10 0x19 /* Extended byte 10 */ +#define R_EB11 0x1a /* Extended byte 11 */ +#define R_EB12 0x1b /* Extended byte 12 */ +#define R_EB13 0x1c /* Extended byte 13 */ +#define R_EB14 0x1d /* Extended byte 14 */ +#define R_EB15 0x1e /* Extended byte 15 */ +#define R_EB16 0x1f /* Extended byte 16 */ +#define R_EB17 0x20 /* Extended byte 17 */ +#define R_EB18 0x21 /* Extended byte 18 */ +#define R_EB19 0x22 /* Extended byte 19 */ +#define R_EB20 0x23 /* Extended byte 20 */ +#define R_EB21 0x24 /* Extended byte 21 */ +#define R_EB22 0x25 /* Extended byte 22 */ +#define R_EB23 0x26 /* Extended byte 23 */ + +#define TDA18271_NUM_REGS 39 + +struct tda18271_pll_map { + u32 lomax; + u8 pd; /* post div */ + u8 d; /* div */ +}; + +extern struct tda18271_pll_map tda18271_main_pll[]; +extern struct tda18271_pll_map tda18271_cal_pll[]; + +struct tda18271_map { + u32 rfmax; + u8 val; +}; + +extern struct tda18271_map tda18271_bp_filter[]; +extern struct tda18271_map tda18271_km[]; +extern struct tda18271_map tda18271_rf_band[]; +extern struct tda18271_map tda18271_gain_taper[]; +extern struct tda18271_map tda18271_rf_cal[]; + +#endif /* __TDA18271_PRIV_H__ */ + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * --------------------------------------------------------------------------- + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/dvb/frontends/tda18271-tables.c b/drivers/media/dvb/frontends/tda18271-tables.c new file mode 100644 index 000000000000..a018b5140873 --- /dev/null +++ b/drivers/media/dvb/frontends/tda18271-tables.c @@ -0,0 +1,253 @@ +/* + tda18271-tables.c - driver for the Philips / NXP TDA18271 silicon tuner + + Copyright (C) 2007 Michael Krufky (mkrufky@linuxtv.org) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include "tda18271-priv.h" + +struct tda18271_pll_map tda18271_main_pll[] = { + { .lomax = 32000, .pd = 0x5f, .d = 0xf0 }, + { .lomax = 35000, .pd = 0x5e, .d = 0xe0 }, + { .lomax = 37000, .pd = 0x5d, .d = 0xd0 }, + { .lomax = 41000, .pd = 0x5c, .d = 0xc0 }, + { .lomax = 44000, .pd = 0x5b, .d = 0xb0 }, + { .lomax = 49000, .pd = 0x5a, .d = 0xa0 }, + { .lomax = 54000, .pd = 0x59, .d = 0x90 }, + { .lomax = 61000, .pd = 0x58, .d = 0x80 }, + { .lomax = 65000, .pd = 0x4f, .d = 0x78 }, + { .lomax = 70000, .pd = 0x4e, .d = 0x70 }, + { .lomax = 75000, .pd = 0x4d, .d = 0x68 }, + { .lomax = 82000, .pd = 0x4c, .d = 0x60 }, + { .lomax = 89000, .pd = 0x4b, .d = 0x58 }, + { .lomax = 98000, .pd = 0x4a, .d = 0x50 }, + { .lomax = 109000, .pd = 0x49, .d = 0x48 }, + { .lomax = 123000, .pd = 0x48, .d = 0x40 }, + { .lomax = 131000, .pd = 0x3f, .d = 0x3c }, + { .lomax = 141000, .pd = 0x3e, .d = 0x38 }, + { .lomax = 151000, .pd = 0x3d, .d = 0x34 }, + { .lomax = 164000, .pd = 0x3c, .d = 0x30 }, + { .lomax = 179000, .pd = 0x3b, .d = 0x2c }, + { .lomax = 197000, .pd = 0x3a, .d = 0x28 }, + { .lomax = 219000, .pd = 0x39, .d = 0x24 }, + { .lomax = 246000, .pd = 0x38, .d = 0x20 }, + { .lomax = 263000, .pd = 0x2f, .d = 0x1e }, + { .lomax = 282000, .pd = 0x2e, .d = 0x1c }, + { .lomax = 303000, .pd = 0x2d, .d = 0x1a }, + { .lomax = 329000, .pd = 0x2c, .d = 0x18 }, + { .lomax = 359000, .pd = 0x2b, .d = 0x16 }, + { .lomax = 395000, .pd = 0x2a, .d = 0x14 }, + { .lomax = 438000, .pd = 0x29, .d = 0x12 }, + { .lomax = 493000, .pd = 0x28, .d = 0x10 }, + { .lomax = 526000, .pd = 0x1f, .d = 0x0f }, + { .lomax = 564000, .pd = 0x1e, .d = 0x0e }, + { .lomax = 607000, .pd = 0x1d, .d = 0x0d }, + { .lomax = 658000, .pd = 0x1c, .d = 0x0c }, + { .lomax = 718000, .pd = 0x1b, .d = 0x0b }, + { .lomax = 790000, .pd = 0x1a, .d = 0x0a }, + { .lomax = 877000, .pd = 0x19, .d = 0x09 }, + { .lomax = 987000, .pd = 0x18, .d = 0x08 }, + { .lomax = 0, .pd = 0x00, .d = 0x00 }, /* end */ +}; + +struct tda18271_pll_map tda18271_cal_pll[] = { + { .lomax = 33000, .pd = 0xdd, .d = 0xd0 }, + { .lomax = 36000, .pd = 0xdc, .d = 0xc0 }, + { .lomax = 40000, .pd = 0xdb, .d = 0xb0 }, + { .lomax = 44000, .pd = 0xda, .d = 0xa0 }, + { .lomax = 49000, .pd = 0xd9, .d = 0x90 }, + { .lomax = 55000, .pd = 0xd8, .d = 0x80 }, + { .lomax = 63000, .pd = 0xd3, .d = 0x70 }, + { .lomax = 67000, .pd = 0xcd, .d = 0x68 }, + { .lomax = 73000, .pd = 0xcc, .d = 0x60 }, + { .lomax = 80000, .pd = 0xcb, .d = 0x58 }, + { .lomax = 88000, .pd = 0xca, .d = 0x50 }, + { .lomax = 98000, .pd = 0xc9, .d = 0x48 }, + { .lomax = 110000, .pd = 0xc8, .d = 0x40 }, + { .lomax = 126000, .pd = 0xc3, .d = 0x38 }, + { .lomax = 135000, .pd = 0xbd, .d = 0x34 }, + { .lomax = 147000, .pd = 0xbc, .d = 0x30 }, + { .lomax = 160000, .pd = 0xbb, .d = 0x2c }, + { .lomax = 176000, .pd = 0xba, .d = 0x28 }, + { .lomax = 196000, .pd = 0xb9, .d = 0x24 }, + { .lomax = 220000, .pd = 0xb8, .d = 0x20 }, + { .lomax = 252000, .pd = 0xb3, .d = 0x1c }, + { .lomax = 271000, .pd = 0xad, .d = 0x1a }, + { .lomax = 294000, .pd = 0xac, .d = 0x18 }, + { .lomax = 321000, .pd = 0xab, .d = 0x16 }, + { .lomax = 353000, .pd = 0xaa, .d = 0x14 }, + { .lomax = 392000, .pd = 0xa9, .d = 0x12 }, + { .lomax = 441000, .pd = 0xa8, .d = 0x10 }, + { .lomax = 505000, .pd = 0xa3, .d = 0x0e }, + { .lomax = 543000, .pd = 0x9d, .d = 0x0d }, + { .lomax = 589000, .pd = 0x9c, .d = 0x0c }, + { .lomax = 642000, .pd = 0x9b, .d = 0x0b }, + { .lomax = 707000, .pd = 0x9a, .d = 0x0a }, + { .lomax = 785000, .pd = 0x99, .d = 0x09 }, + { .lomax = 883000, .pd = 0x98, .d = 0x08 }, + { .lomax = 1010000, .pd = 0x93, .d = 0x07 }, + { .lomax = 0, .pd = 0x00, .d = 0x00 }, /* end */ +}; + +struct tda18271_map tda18271_bp_filter[] = { + { .rfmax = 62000, .val = 0x00 }, + { .rfmax = 84000, .val = 0x01 }, + { .rfmax = 100000, .val = 0x02 }, + { .rfmax = 140000, .val = 0x03 }, + { .rfmax = 170000, .val = 0x04 }, + { .rfmax = 180000, .val = 0x05 }, + { .rfmax = 865000, .val = 0x06 }, + { .rfmax = 0, .val = 0x00 }, /* end */ +}; + +struct tda18271_map tda18271_km[] = { + { .rfmax = 61100, .val = 0x74 }, + { .rfmax = 350000, .val = 0x40 }, + { .rfmax = 720000, .val = 0x30 }, + { .rfmax = 865000, .val = 0x40 }, + { .rfmax = 0, .val = 0x00 }, /* end */ +}; + +struct tda18271_map tda18271_rf_band[] = { + { .rfmax = 47900, .val = 0x00 }, + { .rfmax = 61100, .val = 0x01 }, +/* { .rfmax = 152600, .val = 0x02 }, */ + { .rfmax = 121200, .val = 0x02 }, + { .rfmax = 164700, .val = 0x03 }, + { .rfmax = 203500, .val = 0x04 }, + { .rfmax = 457800, .val = 0x05 }, + { .rfmax = 865000, .val = 0x06 }, + { .rfmax = 0, .val = 0x00 }, /* end */ +}; + +struct tda18271_map tda18271_gain_taper[] = { + { .rfmax = 45400, .val = 0x1f }, + { .rfmax = 45800, .val = 0x1e }, + { .rfmax = 46200, .val = 0x1d }, + { .rfmax = 46700, .val = 0x1c }, + { .rfmax = 47100, .val = 0x1b }, + { .rfmax = 47500, .val = 0x1a }, + { .rfmax = 47900, .val = 0x19 }, + { .rfmax = 49600, .val = 0x17 }, + { .rfmax = 51200, .val = 0x16 }, + { .rfmax = 52900, .val = 0x15 }, + { .rfmax = 54500, .val = 0x14 }, + { .rfmax = 56200, .val = 0x13 }, + { .rfmax = 57800, .val = 0x12 }, + { .rfmax = 59500, .val = 0x11 }, + { .rfmax = 61100, .val = 0x10 }, + { .rfmax = 67600, .val = 0x0d }, + { .rfmax = 74200, .val = 0x0c }, + { .rfmax = 80700, .val = 0x0b }, + { .rfmax = 87200, .val = 0x0a }, + { .rfmax = 93800, .val = 0x09 }, + { .rfmax = 100300, .val = 0x08 }, + { .rfmax = 106900, .val = 0x07 }, + { .rfmax = 113400, .val = 0x06 }, + { .rfmax = 119900, .val = 0x05 }, + { .rfmax = 126500, .val = 0x04 }, + { .rfmax = 133000, .val = 0x03 }, + { .rfmax = 139500, .val = 0x02 }, + { .rfmax = 146100, .val = 0x01 }, + { .rfmax = 152600, .val = 0x00 }, + { .rfmax = 154300, .val = 0x1f }, + { .rfmax = 156100, .val = 0x1e }, + { .rfmax = 157800, .val = 0x1d }, + { .rfmax = 159500, .val = 0x1c }, + { .rfmax = 161200, .val = 0x1b }, + { .rfmax = 163000, .val = 0x1a }, + { .rfmax = 164700, .val = 0x19 }, + { .rfmax = 170200, .val = 0x17 }, + { .rfmax = 175800, .val = 0x16 }, + { .rfmax = 181300, .val = 0x15 }, + { .rfmax = 186900, .val = 0x14 }, + { .rfmax = 192400, .val = 0x13 }, + { .rfmax = 198000, .val = 0x12 }, + { .rfmax = 203500, .val = 0x11 }, + { .rfmax = 216200, .val = 0x14 }, + { .rfmax = 228900, .val = 0x13 }, + { .rfmax = 241600, .val = 0x12 }, + { .rfmax = 254400, .val = 0x11 }, + { .rfmax = 267100, .val = 0x10 }, + { .rfmax = 279800, .val = 0x0f }, + { .rfmax = 292500, .val = 0x0e }, + { .rfmax = 305200, .val = 0x0d }, + { .rfmax = 317900, .val = 0x0c }, + { .rfmax = 330700, .val = 0x0b }, + { .rfmax = 343400, .val = 0x0a }, + { .rfmax = 356100, .val = 0x09 }, + { .rfmax = 368800, .val = 0x08 }, + { .rfmax = 381500, .val = 0x07 }, + { .rfmax = 394200, .val = 0x06 }, + { .rfmax = 406900, .val = 0x05 }, + { .rfmax = 419700, .val = 0x04 }, + { .rfmax = 432400, .val = 0x03 }, + { .rfmax = 445100, .val = 0x02 }, + { .rfmax = 457800, .val = 0x01 }, + { .rfmax = 476300, .val = 0x19 }, + { .rfmax = 494800, .val = 0x18 }, + { .rfmax = 513300, .val = 0x17 }, + { .rfmax = 531800, .val = 0x16 }, + { .rfmax = 550300, .val = 0x15 }, + { .rfmax = 568900, .val = 0x14 }, + { .rfmax = 587400, .val = 0x13 }, + { .rfmax = 605900, .val = 0x12 }, + { .rfmax = 624400, .val = 0x11 }, + { .rfmax = 642900, .val = 0x10 }, + { .rfmax = 661400, .val = 0x0f }, + { .rfmax = 679900, .val = 0x0e }, + { .rfmax = 698400, .val = 0x0d }, + { .rfmax = 716900, .val = 0x0c }, + { .rfmax = 735400, .val = 0x0b }, + { .rfmax = 753900, .val = 0x0a }, + { .rfmax = 772500, .val = 0x09 }, + { .rfmax = 791000, .val = 0x08 }, + { .rfmax = 809500, .val = 0x07 }, + { .rfmax = 828000, .val = 0x06 }, + { .rfmax = 846500, .val = 0x05 }, + { .rfmax = 865000, .val = 0x04 }, + { .rfmax = 0, .val = 0x00 }, /* end */ +}; + +struct tda18271_map tda18271_rf_cal[] = { + { .rfmax = 41000, .val = 0x1e }, + { .rfmax = 43000, .val = 0x30 }, + { .rfmax = 45000, .val = 0x43 }, + { .rfmax = 46000, .val = 0x4d }, + { .rfmax = 47000, .val = 0x54 }, + { .rfmax = 47900, .val = 0x64 }, + { .rfmax = 49100, .val = 0x20 }, + { .rfmax = 50000, .val = 0x22 }, + { .rfmax = 51000, .val = 0x2a }, + { .rfmax = 53000, .val = 0x32 }, + { .rfmax = 55000, .val = 0x35 }, + { .rfmax = 56000, .val = 0x3c }, + { .rfmax = 57000, .val = 0x3f }, + { .rfmax = 58000, .val = 0x48 }, + { .rfmax = 59000, .val = 0x4d }, + { .rfmax = 60000, .val = 0x58 }, + { .rfmax = 61100, .val = 0x5f }, + { .rfmax = 0, .val = 0x00 }, /* end */ +}; + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * --------------------------------------------------------------------------- + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/dvb/frontends/tda18271.c b/drivers/media/dvb/frontends/tda18271.c deleted file mode 100644 index ad72ff69ce92..000000000000 --- a/drivers/media/dvb/frontends/tda18271.c +++ /dev/null @@ -1,1067 +0,0 @@ -/* - tda18271.c - driver for the Philips / NXP TDA18271 silicon tuner - - Copyright (C) 2007 Michael Krufky (mkrufky@linuxtv.org) - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#include -#include -#include -#include "tuner-driver.h" - -#include "tda18271.h" - -static int debug; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); - -#define dprintk(level, fmt, arg...) do {\ - if (debug >= level) \ - printk(KERN_DEBUG "%s: " fmt, __FUNCTION__, ##arg); } while (0) - -#define R_ID 0x00 /* ID byte */ -#define R_TM 0x01 /* Thermo byte */ -#define R_PL 0x02 /* Power level byte */ -#define R_EP1 0x03 /* Easy Prog byte 1 */ -#define R_EP2 0x04 /* Easy Prog byte 2 */ -#define R_EP3 0x05 /* Easy Prog byte 3 */ -#define R_EP4 0x06 /* Easy Prog byte 4 */ -#define R_EP5 0x07 /* Easy Prog byte 5 */ -#define R_CPD 0x08 /* Cal Post-Divider byte */ -#define R_CD1 0x09 /* Cal Divider byte 1 */ -#define R_CD2 0x0a /* Cal Divider byte 2 */ -#define R_CD3 0x0b /* Cal Divider byte 3 */ -#define R_MPD 0x0c /* Main Post-Divider byte */ -#define R_MD1 0x0d /* Main Divider byte 1 */ -#define R_MD2 0x0e /* Main Divider byte 2 */ -#define R_MD3 0x0f /* Main Divider byte 3 */ -#define R_EB1 0x10 /* Extended byte 1 */ -#define R_EB2 0x11 /* Extended byte 2 */ -#define R_EB3 0x12 /* Extended byte 3 */ -#define R_EB4 0x13 /* Extended byte 4 */ -#define R_EB5 0x14 /* Extended byte 5 */ -#define R_EB6 0x15 /* Extended byte 6 */ -#define R_EB7 0x16 /* Extended byte 7 */ -#define R_EB8 0x17 /* Extended byte 8 */ -#define R_EB9 0x18 /* Extended byte 9 */ -#define R_EB10 0x19 /* Extended byte 10 */ -#define R_EB11 0x1a /* Extended byte 11 */ -#define R_EB12 0x1b /* Extended byte 12 */ -#define R_EB13 0x1c /* Extended byte 13 */ -#define R_EB14 0x1d /* Extended byte 14 */ -#define R_EB15 0x1e /* Extended byte 15 */ -#define R_EB16 0x1f /* Extended byte 16 */ -#define R_EB17 0x20 /* Extended byte 17 */ -#define R_EB18 0x21 /* Extended byte 18 */ -#define R_EB19 0x22 /* Extended byte 19 */ -#define R_EB20 0x23 /* Extended byte 20 */ -#define R_EB21 0x24 /* Extended byte 21 */ -#define R_EB22 0x25 /* Extended byte 22 */ -#define R_EB23 0x26 /* Extended byte 23 */ - -struct tda18271_pll_map { - u32 lomax; - u8 pd; /* post div */ - u8 d; /* div */ -}; - -static struct tda18271_pll_map tda18271_main_pll[] = { - { .lomax = 32000, .pd = 0x5f, .d = 0xf0 }, - { .lomax = 35000, .pd = 0x5e, .d = 0xe0 }, - { .lomax = 37000, .pd = 0x5d, .d = 0xd0 }, - { .lomax = 41000, .pd = 0x5c, .d = 0xc0 }, - { .lomax = 44000, .pd = 0x5b, .d = 0xb0 }, - { .lomax = 49000, .pd = 0x5a, .d = 0xa0 }, - { .lomax = 54000, .pd = 0x59, .d = 0x90 }, - { .lomax = 61000, .pd = 0x58, .d = 0x80 }, - { .lomax = 65000, .pd = 0x4f, .d = 0x78 }, - { .lomax = 70000, .pd = 0x4e, .d = 0x70 }, - { .lomax = 75000, .pd = 0x4d, .d = 0x68 }, - { .lomax = 82000, .pd = 0x4c, .d = 0x60 }, - { .lomax = 89000, .pd = 0x4b, .d = 0x58 }, - { .lomax = 98000, .pd = 0x4a, .d = 0x50 }, - { .lomax = 109000, .pd = 0x49, .d = 0x48 }, - { .lomax = 123000, .pd = 0x48, .d = 0x40 }, - { .lomax = 131000, .pd = 0x3f, .d = 0x3c }, - { .lomax = 141000, .pd = 0x3e, .d = 0x38 }, - { .lomax = 151000, .pd = 0x3d, .d = 0x34 }, - { .lomax = 164000, .pd = 0x3c, .d = 0x30 }, - { .lomax = 179000, .pd = 0x3b, .d = 0x2c }, - { .lomax = 197000, .pd = 0x3a, .d = 0x28 }, - { .lomax = 219000, .pd = 0x39, .d = 0x24 }, - { .lomax = 246000, .pd = 0x38, .d = 0x20 }, - { .lomax = 263000, .pd = 0x2f, .d = 0x1e }, - { .lomax = 282000, .pd = 0x2e, .d = 0x1c }, - { .lomax = 303000, .pd = 0x2d, .d = 0x1a }, - { .lomax = 329000, .pd = 0x2c, .d = 0x18 }, - { .lomax = 359000, .pd = 0x2b, .d = 0x16 }, - { .lomax = 395000, .pd = 0x2a, .d = 0x14 }, - { .lomax = 438000, .pd = 0x29, .d = 0x12 }, - { .lomax = 493000, .pd = 0x28, .d = 0x10 }, - { .lomax = 526000, .pd = 0x1f, .d = 0x0f }, - { .lomax = 564000, .pd = 0x1e, .d = 0x0e }, - { .lomax = 607000, .pd = 0x1d, .d = 0x0d }, - { .lomax = 658000, .pd = 0x1c, .d = 0x0c }, - { .lomax = 718000, .pd = 0x1b, .d = 0x0b }, - { .lomax = 790000, .pd = 0x1a, .d = 0x0a }, - { .lomax = 877000, .pd = 0x19, .d = 0x09 }, - { .lomax = 987000, .pd = 0x18, .d = 0x08 }, - { .lomax = 0, .pd = 0x00, .d = 0x00 }, /* end */ -}; - -static struct tda18271_pll_map tda18271_cal_pll[] = { - { .lomax = 33000, .pd = 0xdd, .d = 0xd0 }, - { .lomax = 36000, .pd = 0xdc, .d = 0xc0 }, - { .lomax = 40000, .pd = 0xdb, .d = 0xb0 }, - { .lomax = 44000, .pd = 0xda, .d = 0xa0 }, - { .lomax = 49000, .pd = 0xd9, .d = 0x90 }, - { .lomax = 55000, .pd = 0xd8, .d = 0x80 }, - { .lomax = 63000, .pd = 0xd3, .d = 0x70 }, - { .lomax = 67000, .pd = 0xcd, .d = 0x68 }, - { .lomax = 73000, .pd = 0xcc, .d = 0x60 }, - { .lomax = 80000, .pd = 0xcb, .d = 0x58 }, - { .lomax = 88000, .pd = 0xca, .d = 0x50 }, - { .lomax = 98000, .pd = 0xc9, .d = 0x48 }, - { .lomax = 110000, .pd = 0xc8, .d = 0x40 }, - { .lomax = 126000, .pd = 0xc3, .d = 0x38 }, - { .lomax = 135000, .pd = 0xbd, .d = 0x34 }, - { .lomax = 147000, .pd = 0xbc, .d = 0x30 }, - { .lomax = 160000, .pd = 0xbb, .d = 0x2c }, - { .lomax = 176000, .pd = 0xba, .d = 0x28 }, - { .lomax = 196000, .pd = 0xb9, .d = 0x24 }, - { .lomax = 220000, .pd = 0xb8, .d = 0x20 }, - { .lomax = 252000, .pd = 0xb3, .d = 0x1c }, - { .lomax = 271000, .pd = 0xad, .d = 0x1a }, - { .lomax = 294000, .pd = 0xac, .d = 0x18 }, - { .lomax = 321000, .pd = 0xab, .d = 0x16 }, - { .lomax = 353000, .pd = 0xaa, .d = 0x14 }, - { .lomax = 392000, .pd = 0xa9, .d = 0x12 }, - { .lomax = 441000, .pd = 0xa8, .d = 0x10 }, - { .lomax = 505000, .pd = 0xa3, .d = 0x0e }, - { .lomax = 543000, .pd = 0x9d, .d = 0x0d }, - { .lomax = 589000, .pd = 0x9c, .d = 0x0c }, - { .lomax = 642000, .pd = 0x9b, .d = 0x0b }, - { .lomax = 707000, .pd = 0x9a, .d = 0x0a }, - { .lomax = 785000, .pd = 0x99, .d = 0x09 }, - { .lomax = 883000, .pd = 0x98, .d = 0x08 }, - { .lomax = 1010000, .pd = 0x93, .d = 0x07 }, - { .lomax = 0, .pd = 0x00, .d = 0x00 }, /* end */ -}; - -struct tda18271_map { - u32 rfmax; - u8 val; -}; - -static struct tda18271_map tda18271_bp_filter[] = { - { .rfmax = 62000, .val = 0x00 }, - { .rfmax = 84000, .val = 0x01 }, - { .rfmax = 100000, .val = 0x02 }, - { .rfmax = 140000, .val = 0x03 }, - { .rfmax = 170000, .val = 0x04 }, - { .rfmax = 180000, .val = 0x05 }, - { .rfmax = 865000, .val = 0x06 }, - { .rfmax = 0, .val = 0x00 }, /* end */ -}; - -static struct tda18271_map tda18271_km[] = { - { .rfmax = 61100, .val = 0x74 }, - { .rfmax = 350000, .val = 0x40 }, - { .rfmax = 720000, .val = 0x30 }, - { .rfmax = 865000, .val = 0x40 }, - { .rfmax = 0, .val = 0x00 }, /* end */ -}; - -static struct tda18271_map tda18271_rf_band[] = { - { .rfmax = 47900, .val = 0x00 }, - { .rfmax = 61100, .val = 0x01 }, -/* { .rfmax = 152600, .val = 0x02 }, */ - { .rfmax = 121200, .val = 0x02 }, - { .rfmax = 164700, .val = 0x03 }, - { .rfmax = 203500, .val = 0x04 }, - { .rfmax = 457800, .val = 0x05 }, - { .rfmax = 865000, .val = 0x06 }, - { .rfmax = 0, .val = 0x00 }, /* end */ -}; - -static struct tda18271_map tda18271_gain_taper[] = { - { .rfmax = 45400, .val = 0x1f }, - { .rfmax = 45800, .val = 0x1e }, - { .rfmax = 46200, .val = 0x1d }, - { .rfmax = 46700, .val = 0x1c }, - { .rfmax = 47100, .val = 0x1b }, - { .rfmax = 47500, .val = 0x1a }, - { .rfmax = 47900, .val = 0x19 }, - { .rfmax = 49600, .val = 0x17 }, - { .rfmax = 51200, .val = 0x16 }, - { .rfmax = 52900, .val = 0x15 }, - { .rfmax = 54500, .val = 0x14 }, - { .rfmax = 56200, .val = 0x13 }, - { .rfmax = 57800, .val = 0x12 }, - { .rfmax = 59500, .val = 0x11 }, - { .rfmax = 61100, .val = 0x10 }, - { .rfmax = 67600, .val = 0x0d }, - { .rfmax = 74200, .val = 0x0c }, - { .rfmax = 80700, .val = 0x0b }, - { .rfmax = 87200, .val = 0x0a }, - { .rfmax = 93800, .val = 0x09 }, - { .rfmax = 100300, .val = 0x08 }, - { .rfmax = 106900, .val = 0x07 }, - { .rfmax = 113400, .val = 0x06 }, - { .rfmax = 119900, .val = 0x05 }, - { .rfmax = 126500, .val = 0x04 }, - { .rfmax = 133000, .val = 0x03 }, - { .rfmax = 139500, .val = 0x02 }, - { .rfmax = 146100, .val = 0x01 }, - { .rfmax = 152600, .val = 0x00 }, - { .rfmax = 154300, .val = 0x1f }, - { .rfmax = 156100, .val = 0x1e }, - { .rfmax = 157800, .val = 0x1d }, - { .rfmax = 159500, .val = 0x1c }, - { .rfmax = 161200, .val = 0x1b }, - { .rfmax = 163000, .val = 0x1a }, - { .rfmax = 164700, .val = 0x19 }, - { .rfmax = 170200, .val = 0x17 }, - { .rfmax = 175800, .val = 0x16 }, - { .rfmax = 181300, .val = 0x15 }, - { .rfmax = 186900, .val = 0x14 }, - { .rfmax = 192400, .val = 0x13 }, - { .rfmax = 198000, .val = 0x12 }, - { .rfmax = 203500, .val = 0x11 }, - { .rfmax = 216200, .val = 0x14 }, - { .rfmax = 228900, .val = 0x13 }, - { .rfmax = 241600, .val = 0x12 }, - { .rfmax = 254400, .val = 0x11 }, - { .rfmax = 267100, .val = 0x10 }, - { .rfmax = 279800, .val = 0x0f }, - { .rfmax = 292500, .val = 0x0e }, - { .rfmax = 305200, .val = 0x0d }, - { .rfmax = 317900, .val = 0x0c }, - { .rfmax = 330700, .val = 0x0b }, - { .rfmax = 343400, .val = 0x0a }, - { .rfmax = 356100, .val = 0x09 }, - { .rfmax = 368800, .val = 0x08 }, - { .rfmax = 381500, .val = 0x07 }, - { .rfmax = 394200, .val = 0x06 }, - { .rfmax = 406900, .val = 0x05 }, - { .rfmax = 419700, .val = 0x04 }, - { .rfmax = 432400, .val = 0x03 }, - { .rfmax = 445100, .val = 0x02 }, - { .rfmax = 457800, .val = 0x01 }, - { .rfmax = 476300, .val = 0x19 }, - { .rfmax = 494800, .val = 0x18 }, - { .rfmax = 513300, .val = 0x17 }, - { .rfmax = 531800, .val = 0x16 }, - { .rfmax = 550300, .val = 0x15 }, - { .rfmax = 568900, .val = 0x14 }, - { .rfmax = 587400, .val = 0x13 }, - { .rfmax = 605900, .val = 0x12 }, - { .rfmax = 624400, .val = 0x11 }, - { .rfmax = 642900, .val = 0x10 }, - { .rfmax = 661400, .val = 0x0f }, - { .rfmax = 679900, .val = 0x0e }, - { .rfmax = 698400, .val = 0x0d }, - { .rfmax = 716900, .val = 0x0c }, - { .rfmax = 735400, .val = 0x0b }, - { .rfmax = 753900, .val = 0x0a }, - { .rfmax = 772500, .val = 0x09 }, - { .rfmax = 791000, .val = 0x08 }, - { .rfmax = 809500, .val = 0x07 }, - { .rfmax = 828000, .val = 0x06 }, - { .rfmax = 846500, .val = 0x05 }, - { .rfmax = 865000, .val = 0x04 }, - { .rfmax = 0, .val = 0x00 }, /* end */ -}; - -static struct tda18271_map tda18271_rf_cal[] = { - { .rfmax = 41000, .val = 0x1e }, - { .rfmax = 43000, .val = 0x30 }, - { .rfmax = 45000, .val = 0x43 }, - { .rfmax = 46000, .val = 0x4d }, - { .rfmax = 47000, .val = 0x54 }, - { .rfmax = 47900, .val = 0x64 }, - { .rfmax = 49100, .val = 0x20 }, - { .rfmax = 50000, .val = 0x22 }, - { .rfmax = 51000, .val = 0x2a }, - { .rfmax = 53000, .val = 0x32 }, - { .rfmax = 55000, .val = 0x35 }, - { .rfmax = 56000, .val = 0x3c }, - { .rfmax = 57000, .val = 0x3f }, - { .rfmax = 58000, .val = 0x48 }, - { .rfmax = 59000, .val = 0x4d }, - { .rfmax = 60000, .val = 0x58 }, - { .rfmax = 61100, .val = 0x5f }, - { .rfmax = 0, .val = 0x00 }, /* end */ -}; - -/*---------------------------------------------------------------------*/ - -#define TDA18271_NUM_REGS 39 - -#define TDA18271_ANALOG 0 -#define TDA18271_DIGITAL 1 - -struct tda18271_priv { - u8 i2c_addr; - struct i2c_adapter *i2c_adap; - unsigned char tda18271_regs[TDA18271_NUM_REGS]; - int mode; - - u32 frequency; - u32 bandwidth; -}; - -static int tda18271_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) -{ - struct tda18271_priv *priv = fe->tuner_priv; - struct analog_tuner_ops *ops = fe->ops.analog_demod_ops; - int ret = 0; - - switch (priv->mode) { - case TDA18271_ANALOG: - if (ops && ops->i2c_gate_ctrl) - ret = ops->i2c_gate_ctrl(fe, enable); - break; - case TDA18271_DIGITAL: - if (fe->ops.i2c_gate_ctrl) - ret = fe->ops.i2c_gate_ctrl(fe, enable); - break; - } - - return ret; -}; - -/*---------------------------------------------------------------------*/ - -static void tda18271_dump_regs(struct dvb_frontend *fe) -{ - struct tda18271_priv *priv = fe->tuner_priv; - unsigned char *regs = priv->tda18271_regs; - - dprintk(1, "=== TDA18271 REG DUMP ===\n"); - dprintk(1, "ID_BYTE = 0x%x\n", 0xff & regs[R_ID]); - dprintk(1, "THERMO_BYTE = 0x%x\n", 0xff & regs[R_TM]); - dprintk(1, "POWER_LEVEL_BYTE = 0x%x\n", 0xff & regs[R_PL]); - dprintk(1, "EASY_PROG_BYTE_1 = 0x%x\n", 0xff & regs[R_EP1]); - dprintk(1, "EASY_PROG_BYTE_2 = 0x%x\n", 0xff & regs[R_EP2]); - dprintk(1, "EASY_PROG_BYTE_3 = 0x%x\n", 0xff & regs[R_EP3]); - dprintk(1, "EASY_PROG_BYTE_4 = 0x%x\n", 0xff & regs[R_EP4]); - dprintk(1, "EASY_PROG_BYTE_5 = 0x%x\n", 0xff & regs[R_EP5]); - dprintk(1, "CAL_POST_DIV_BYTE = 0x%x\n", 0xff & regs[R_CPD]); - dprintk(1, "CAL_DIV_BYTE_1 = 0x%x\n", 0xff & regs[R_CD1]); - dprintk(1, "CAL_DIV_BYTE_2 = 0x%x\n", 0xff & regs[R_CD2]); - dprintk(1, "CAL_DIV_BYTE_3 = 0x%x\n", 0xff & regs[R_CD3]); - dprintk(1, "MAIN_POST_DIV_BYTE = 0x%x\n", 0xff & regs[R_MPD]); - dprintk(1, "MAIN_DIV_BYTE_1 = 0x%x\n", 0xff & regs[R_MD1]); - dprintk(1, "MAIN_DIV_BYTE_2 = 0x%x\n", 0xff & regs[R_MD2]); - dprintk(1, "MAIN_DIV_BYTE_3 = 0x%x\n", 0xff & regs[R_MD3]); -} - -static void tda18271_read_regs(struct dvb_frontend *fe) -{ - struct tda18271_priv *priv = fe->tuner_priv; - unsigned char *regs = priv->tda18271_regs; - unsigned char buf = 0x00; - int ret; - struct i2c_msg msg[] = { - { .addr = priv->i2c_addr, .flags = 0, - .buf = &buf, .len = 1 }, - { .addr = priv->i2c_addr, .flags = I2C_M_RD, - .buf = regs, .len = 16 } - }; - - tda18271_i2c_gate_ctrl(fe, 1); - - /* read all registers */ - ret = i2c_transfer(priv->i2c_adap, msg, 2); - - tda18271_i2c_gate_ctrl(fe, 0); - - if (ret != 2) - printk("ERROR: %s: i2c_transfer returned: %d\n", - __FUNCTION__, ret); - - if (debug > 1) - tda18271_dump_regs(fe); -} - -static void tda18271_write_regs(struct dvb_frontend *fe, int idx, int len) -{ - struct tda18271_priv *priv = fe->tuner_priv; - unsigned char *regs = priv->tda18271_regs; - unsigned char buf[TDA18271_NUM_REGS+1]; - struct i2c_msg msg = { .addr = priv->i2c_addr, .flags = 0, - .buf = buf, .len = len+1 }; - int i, ret; - - BUG_ON((len == 0) || (idx+len > sizeof(buf))); - - buf[0] = idx; - for (i = 1; i <= len; i++) { - buf[i] = regs[idx-1+i]; - } - - tda18271_i2c_gate_ctrl(fe, 1); - - /* write registers */ - ret = i2c_transfer(priv->i2c_adap, &msg, 1); - - tda18271_i2c_gate_ctrl(fe, 0); - - if (ret != 1) - printk(KERN_WARNING "ERROR: %s: i2c_transfer returned: %d\n", - __FUNCTION__, ret); -} - -/*---------------------------------------------------------------------*/ - -static int tda18271_init_regs(struct dvb_frontend *fe) -{ - struct tda18271_priv *priv = fe->tuner_priv; - unsigned char *regs = priv->tda18271_regs; - - printk(KERN_INFO "tda18271: initializing registers\n"); - - /* initialize registers */ - regs[R_ID] = 0x83; - regs[R_TM] = 0x08; - regs[R_PL] = 0x80; - regs[R_EP1] = 0xc6; - regs[R_EP2] = 0xdf; - regs[R_EP3] = 0x16; - regs[R_EP4] = 0x60; - regs[R_EP5] = 0x80; - regs[R_CPD] = 0x80; - regs[R_CD1] = 0x00; - regs[R_CD2] = 0x00; - regs[R_CD3] = 0x00; - regs[R_MPD] = 0x00; - regs[R_MD1] = 0x00; - regs[R_MD2] = 0x00; - regs[R_MD3] = 0x00; - regs[R_EB1] = 0xff; - regs[R_EB2] = 0x01; - regs[R_EB3] = 0x84; - regs[R_EB4] = 0x41; - regs[R_EB5] = 0x01; - regs[R_EB6] = 0x84; - regs[R_EB7] = 0x40; - regs[R_EB8] = 0x07; - regs[R_EB9] = 0x00; - regs[R_EB10] = 0x00; - regs[R_EB11] = 0x96; - regs[R_EB12] = 0x0f; - regs[R_EB13] = 0xc1; - regs[R_EB14] = 0x00; - regs[R_EB15] = 0x8f; - regs[R_EB16] = 0x00; - regs[R_EB17] = 0x00; - regs[R_EB18] = 0x00; - regs[R_EB19] = 0x00; - regs[R_EB20] = 0x20; - regs[R_EB21] = 0x33; - regs[R_EB22] = 0x48; - regs[R_EB23] = 0xb0; - - tda18271_write_regs(fe, 0x00, TDA18271_NUM_REGS); - /* setup AGC1 & AGC2 */ - regs[R_EB17] = 0x00; - tda18271_write_regs(fe, R_EB17, 1); - regs[R_EB17] = 0x03; - tda18271_write_regs(fe, R_EB17, 1); - regs[R_EB17] = 0x43; - tda18271_write_regs(fe, R_EB17, 1); - regs[R_EB17] = 0x4c; - tda18271_write_regs(fe, R_EB17, 1); - - regs[R_EB20] = 0xa0; - tda18271_write_regs(fe, R_EB20, 1); - regs[R_EB20] = 0xa7; - tda18271_write_regs(fe, R_EB20, 1); - regs[R_EB20] = 0xe7; - tda18271_write_regs(fe, R_EB20, 1); - regs[R_EB20] = 0xec; - tda18271_write_regs(fe, R_EB20, 1); - - /* image rejection calibration */ - - /* low-band */ - regs[R_EP3] = 0x1f; - regs[R_EP4] = 0x66; - regs[R_EP5] = 0x81; - regs[R_CPD] = 0xcc; - regs[R_CD1] = 0x6c; - regs[R_CD2] = 0x00; - regs[R_CD3] = 0x00; - regs[R_MPD] = 0xcd; - regs[R_MD1] = 0x77; - regs[R_MD2] = 0x08; - regs[R_MD3] = 0x00; - - tda18271_write_regs(fe, R_EP3, 11); - msleep(5); /* pll locking */ - - regs[R_EP1] = 0xc6; - tda18271_write_regs(fe, R_EP1, 1); - msleep(5); /* wanted low measurement */ - - regs[R_EP3] = 0x1f; - regs[R_EP4] = 0x66; - regs[R_EP5] = 0x85; - regs[R_CPD] = 0xcb; - regs[R_CD1] = 0x66; - regs[R_CD2] = 0x70; - regs[R_CD3] = 0x00; - - tda18271_write_regs(fe, R_EP3, 7); - msleep(5); /* pll locking */ - - regs[R_EP2] = 0xdf; - tda18271_write_regs(fe, R_EP2, 1); - msleep(30); /* image low optimization completion */ - - /* mid-band */ - regs[R_EP3] = 0x1f; - regs[R_EP4] = 0x66; - regs[R_EP5] = 0x82; - regs[R_CPD] = 0xa8; - regs[R_CD1] = 0x66; - regs[R_CD2] = 0x00; - regs[R_CD3] = 0x00; - regs[R_MPD] = 0xa9; - regs[R_MD1] = 0x73; - regs[R_MD2] = 0x1a; - regs[R_MD3] = 0x00; - - tda18271_write_regs(fe, R_EP3, 11); - msleep(5); /* pll locking */ - - regs[R_EP1] = 0xc6; - tda18271_write_regs(fe, R_EP1, 1); - msleep(5); /* wanted mid measurement */ - - regs[R_EP3] = 0x1f; - regs[R_EP4] = 0x66; - regs[R_EP5] = 0x86; - regs[R_CPD] = 0xa8; - regs[R_CD1] = 0x66; - regs[R_CD2] = 0xa0; - regs[R_CD3] = 0x00; - - tda18271_write_regs(fe, R_EP3, 7); - msleep(5); /* pll locking */ - - regs[R_EP2] = 0xdf; - tda18271_write_regs(fe, R_EP2, 1); - msleep(30); /* image mid optimization completion */ - - /* high-band */ - regs[R_EP3] = 0x1f; - regs[R_EP4] = 0x66; - regs[R_EP5] = 0x83; - regs[R_CPD] = 0x98; - regs[R_CD1] = 0x65; - regs[R_CD2] = 0x00; - regs[R_CD3] = 0x00; - regs[R_MPD] = 0x99; - regs[R_MD1] = 0x71; - regs[R_MD2] = 0xcd; - regs[R_MD3] = 0x00; - - tda18271_write_regs(fe, R_EP3, 11); - msleep(5); /* pll locking */ - - regs[R_EP1] = 0xc6; - tda18271_write_regs(fe, R_EP1, 1); - msleep(5); /* wanted high measurement */ - - regs[R_EP3] = 0x1f; - regs[R_EP4] = 0x66; - regs[R_EP5] = 0x87; - regs[R_CPD] = 0x98; - regs[R_CD1] = 0x65; - regs[R_CD2] = 0x50; - regs[R_CD3] = 0x00; - - tda18271_write_regs(fe, R_EP3, 7); - msleep(5); /* pll locking */ - - regs[R_EP2] = 0xdf; - - tda18271_write_regs(fe, R_EP2, 1); - msleep(30); /* image high optimization completion */ - - regs[R_EP4] = 0x64; - tda18271_write_regs(fe, R_EP4, 1); - - regs[R_EP1] = 0xc6; - tda18271_write_regs(fe, R_EP1, 1); - - return 0; -} - -static int tda18271_tune(struct dvb_frontend *fe, - u32 ifc, u32 freq, u32 bw, u8 std) -{ - struct tda18271_priv *priv = fe->tuner_priv; - unsigned char *regs = priv->tda18271_regs; - u32 div, N = 0; - int i; - - tda18271_read_regs(fe); - - /* test IR_CAL_OK to see if we need init */ - if ((regs[R_EP1] & 0x08) == 0) - tda18271_init_regs(fe); - - - dprintk(1, "freq = %d, ifc = %d\n", freq, ifc); - - /* RF tracking filter calibration */ - - /* calculate BP_Filter */ - i = 0; - while ((tda18271_bp_filter[i].rfmax * 1000) < freq) { - if (tda18271_bp_filter[i + 1].rfmax == 0) - break; - i++; - } - dprintk(2, "bp filter = 0x%x, i = %d\n", tda18271_bp_filter[i].val, i); - - regs[R_EP1] &= ~0x07; /* clear bp filter bits */ - regs[R_EP1] |= tda18271_bp_filter[i].val; - tda18271_write_regs(fe, R_EP1, 1); - - regs[R_EB4] &= 0x07; - regs[R_EB4] |= 0x60; - tda18271_write_regs(fe, R_EB4, 1); - - regs[R_EB7] = 0x60; - tda18271_write_regs(fe, R_EB7, 1); - - regs[R_EB14] = 0x00; - tda18271_write_regs(fe, R_EB14, 1); - - regs[R_EB20] = 0xcc; - tda18271_write_regs(fe, R_EB20, 1); - - /* set CAL mode to RF tracking filter calibration */ - regs[R_EB4] |= 0x03; - - /* calculate CAL PLL */ - - switch (priv->mode) { - case TDA18271_ANALOG: - N = freq - 1250000; - break; - case TDA18271_DIGITAL: - N = freq + bw / 2; - break; - } - - i = 0; - while ((tda18271_cal_pll[i].lomax * 1000) < N) { - if (tda18271_cal_pll[i + 1].lomax == 0) - break; - i++; - } - dprintk(2, "cal pll, pd = 0x%x, d = 0x%x, i = %d\n", - tda18271_cal_pll[i].pd, tda18271_cal_pll[i].d, i); - - regs[R_CPD] = tda18271_cal_pll[i].pd; - - div = ((tda18271_cal_pll[i].d * (N / 1000)) << 7) / 125; - regs[R_CD1] = 0xff & (div >> 16); - regs[R_CD2] = 0xff & (div >> 8); - regs[R_CD3] = 0xff & div; - - /* calculate MAIN PLL */ - - switch (priv->mode) { - case TDA18271_ANALOG: - N = freq - 250000; - break; - case TDA18271_DIGITAL: - N = freq + bw / 2 + 1000000; - break; - } - - i = 0; - while ((tda18271_main_pll[i].lomax * 1000) < N) { - if (tda18271_main_pll[i + 1].lomax == 0) - break; - i++; - } - dprintk(2, "main pll, pd = 0x%x, d = 0x%x, i = %d\n", - tda18271_main_pll[i].pd, tda18271_main_pll[i].d, i); - - regs[R_MPD] = (0x7f & tda18271_main_pll[i].pd); - - switch (priv->mode) { - case TDA18271_ANALOG: - regs[R_MPD] &= ~0x08; - break; - case TDA18271_DIGITAL: - regs[R_MPD] |= 0x08; - break; - } - - div = ((tda18271_main_pll[i].d * (N / 1000)) << 7) / 125; - regs[R_MD1] = 0xff & (div >> 16); - regs[R_MD2] = 0xff & (div >> 8); - regs[R_MD3] = 0xff & div; - - tda18271_write_regs(fe, R_EP3, 11); - msleep(5); /* RF tracking filter calibration initialization */ - - /* search for K,M,CO for RF Calibration */ - i = 0; - while ((tda18271_km[i].rfmax * 1000) < freq) { - if (tda18271_km[i + 1].rfmax == 0) - break; - i++; - } - dprintk(2, "km = 0x%x, i = %d\n", tda18271_km[i].val, i); - - regs[R_EB13] &= 0x83; - regs[R_EB13] |= tda18271_km[i].val; - tda18271_write_regs(fe, R_EB13, 1); - - /* search for RF_BAND */ - i = 0; - while ((tda18271_rf_band[i].rfmax * 1000) < freq) { - if (tda18271_rf_band[i + 1].rfmax == 0) - break; - i++; - } - dprintk(2, "rf band = 0x%x, i = %d\n", tda18271_rf_band[i].val, i); - - regs[R_EP2] &= ~0xe0; /* clear rf band bits */ - regs[R_EP2] |= (tda18271_rf_band[i].val << 5); - - /* search for Gain_Taper */ - i = 0; - while ((tda18271_gain_taper[i].rfmax * 1000) < freq) { - if (tda18271_gain_taper[i + 1].rfmax == 0) - break; - i++; - } - dprintk(2, "gain taper = 0x%x, i = %d\n", - tda18271_gain_taper[i].val, i); - - regs[R_EP2] &= ~0x1f; /* clear gain taper bits */ - regs[R_EP2] |= tda18271_gain_taper[i].val; - - tda18271_write_regs(fe, R_EP2, 1); - tda18271_write_regs(fe, R_EP1, 1); - tda18271_write_regs(fe, R_EP2, 1); - tda18271_write_regs(fe, R_EP1, 1); - - regs[R_EB4] &= 0x07; - regs[R_EB4] |= 0x40; - tda18271_write_regs(fe, R_EB4, 1); - - regs[R_EB7] = 0x40; - tda18271_write_regs(fe, R_EB7, 1); - msleep(10); - - regs[R_EB20] = 0xec; - tda18271_write_regs(fe, R_EB20, 1); - msleep(60); /* RF tracking filter calibration completion */ - - regs[R_EP4] &= ~0x03; /* set cal mode to normal */ - tda18271_write_regs(fe, R_EP4, 1); - - tda18271_write_regs(fe, R_EP1, 1); - - /* RF tracking filer correction for VHF_Low band */ - i = 0; - while ((tda18271_rf_cal[i].rfmax * 1000) < freq) { - if (tda18271_rf_cal[i].rfmax == 0) - break; - i++; - } - dprintk(2, "rf cal = 0x%x, i = %d\n", tda18271_rf_cal[i].val, i); - - /* VHF_Low band only */ - if (tda18271_rf_cal[i].rfmax != 0) { - regs[R_EB14] = tda18271_rf_cal[i].val; - tda18271_write_regs(fe, R_EB14, 1); - } - - /* Channel Configuration */ - - switch (priv->mode) { - case TDA18271_ANALOG: - regs[R_EB22] = 0x2c; - break; - case TDA18271_DIGITAL: - regs[R_EB22] = 0x37; - break; - } - tda18271_write_regs(fe, R_EB22, 1); - - regs[R_EP1] |= 0x40; /* set dis power level on */ - - /* set standard */ - regs[R_EP3] &= ~0x1f; /* clear std bits */ - - /* see table 22 */ - regs[R_EP3] |= std; - - /* TO DO: * - * ================ * - * FM radio, 0x18 * - * ATSC 6MHz, 0x1c * - * DVB-T 6MHz, 0x1c * - * DVB-T 7MHz, 0x1d * - * DVB-T 8MHz, 0x1e * - * QAM 6MHz, 0x1d * - * QAM 8MHz, 0x1f */ - - regs[R_EP4] &= ~0x03; /* set cal mode to normal */ - - regs[R_EP4] &= ~0x1c; /* clear if level bits */ - switch (priv->mode) { - case TDA18271_ANALOG: - regs[R_MPD] &= ~0x80; /* IF notch = 0 */ - break; - case TDA18271_DIGITAL: - regs[R_EP4] |= 0x04; - regs[R_MPD] |= 0x80; - break; - } - - regs[R_EP4] &= ~0x80; /* turn this bit on only for fm */ - - /* FIXME: image rejection validity EP5[2:0] */ - - /* calculate MAIN PLL */ - N = freq + ifc; - - i = 0; - while ((tda18271_main_pll[i].lomax * 1000) < N) { - if (tda18271_main_pll[i + 1].lomax == 0) - break; - i++; - } - dprintk(2, "main pll, pd = 0x%x, d = 0x%x, i = %d\n", - tda18271_main_pll[i].pd, tda18271_main_pll[i].d, i); - - regs[R_MPD] = (0x7f & tda18271_main_pll[i].pd); - switch (priv->mode) { - case TDA18271_ANALOG: - regs[R_MPD] &= ~0x08; - break; - case TDA18271_DIGITAL: - regs[R_MPD] |= 0x08; - break; - } - - div = ((tda18271_main_pll[i].d * (N / 1000)) << 7) / 125; - regs[R_MD1] = 0xff & (div >> 16); - regs[R_MD2] = 0xff & (div >> 8); - regs[R_MD3] = 0xff & div; - - tda18271_write_regs(fe, R_TM, 15); - msleep(5); - return 0; -} - -/* ------------------------------------------------------------------ */ - -static int tda18271_set_params(struct dvb_frontend *fe, - struct dvb_frontend_parameters *params) -{ - struct tda18271_priv *priv = fe->tuner_priv; - u8 std; - u32 bw, sgIF = 0; - - u32 freq = params->frequency; - - priv->mode = TDA18271_DIGITAL; - - /* see table 22 */ - if (fe->ops.info.type == FE_ATSC) { - switch (params->u.vsb.modulation) { - case VSB_8: - case VSB_16: - std = 0x1b; /* device-specific (spec says 0x1c) */ - sgIF = 5380000; - break; - case QAM_64: - case QAM_256: - std = 0x18; /* device-specific (spec says 0x1d) */ - sgIF = 4000000; - break; - default: - printk(KERN_WARNING "%s: modulation not set!\n", - __FUNCTION__); - return -EINVAL; - } - freq += 1750000; /* Adjust to center (+1.75MHZ) */ - bw = 6000000; - } else if (fe->ops.info.type == FE_OFDM) { - switch (params->u.ofdm.bandwidth) { - case BANDWIDTH_6_MHZ: - std = 0x1c; - bw = 6000000; - break; - case BANDWIDTH_7_MHZ: - std = 0x1d; - bw = 7000000; - break; - case BANDWIDTH_8_MHZ: - std = 0x1e; - bw = 8000000; - break; - default: - printk(KERN_WARNING "%s: bandwidth not set!\n", - __FUNCTION__); - return -EINVAL; - } - } else { - printk(KERN_WARNING "%s: modulation type not supported!\n", - __FUNCTION__); - return -EINVAL; - } - - return tda18271_tune(fe, sgIF, freq, bw, std); -} - -static int tda18271_set_analog_params(struct dvb_frontend *fe, - struct analog_parameters *params) -{ - struct tda18271_priv *priv = fe->tuner_priv; - u8 std; - unsigned int sgIF; - char *mode; - - priv->mode = TDA18271_ANALOG; - - /* see table 22 */ - if (params->std & V4L2_STD_MN) { - std = 0x0d; - sgIF = 92; - mode = "MN"; - } else if (params->std & V4L2_STD_B) { - std = 0x0e; - sgIF = 108; - mode = "B"; - } else if (params->std & V4L2_STD_GH) { - std = 0x0f; - sgIF = 124; - mode = "GH"; - } else if (params->std & V4L2_STD_PAL_I) { - std = 0x0f; - sgIF = 124; - mode = "I"; - } else if (params->std & V4L2_STD_DK) { - std = 0x0f; - sgIF = 124; - mode = "DK"; - } else if (params->std & V4L2_STD_SECAM_L) { - std = 0x0f; - sgIF = 124; - mode = "L"; - } else if (params->std & V4L2_STD_SECAM_LC) { - std = 0x0f; - sgIF = 20; - mode = "LC"; - } else { - std = 0x0f; - sgIF = 124; - mode = "xx"; - } - - if (params->mode == V4L2_TUNER_RADIO) - sgIF = 88; /* if frequency is 5.5 MHz */ - - dprintk(1, "setting tda18271 to system %s\n", mode); - - return tda18271_tune(fe, sgIF * 62500, params->frequency * 62500, - 0, std); -} - -static int tda18271_release(struct dvb_frontend *fe) -{ - kfree(fe->tuner_priv); - fe->tuner_priv = NULL; - return 0; -} - -static int tda18271_get_frequency(struct dvb_frontend *fe, u32 *frequency) -{ - struct tda18271_priv *priv = fe->tuner_priv; - *frequency = priv->frequency; - return 0; -} - -static int tda18271_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) -{ - struct tda18271_priv *priv = fe->tuner_priv; - *bandwidth = priv->bandwidth; - return 0; -} - -static struct dvb_tuner_ops tda18271_tuner_ops = { - .info = { - .name = "NXP TDA18271HD", - .frequency_min = 45000000, - .frequency_max = 864000000, - .frequency_step = 62500 - }, - .init = tda18271_init_regs, - .set_params = tda18271_set_params, - .set_analog_params = tda18271_set_analog_params, - .release = tda18271_release, - .get_frequency = tda18271_get_frequency, - .get_bandwidth = tda18271_get_bandwidth, -}; - -struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, - struct i2c_adapter *i2c) -{ - struct tda18271_priv *priv = NULL; - - dprintk(1, "@ 0x%x\n", addr); - priv = kzalloc(sizeof(struct tda18271_priv), GFP_KERNEL); - if (priv == NULL) - return NULL; - - priv->i2c_addr = addr; - priv->i2c_adap = i2c; - - memcpy(&fe->ops.tuner_ops, &tda18271_tuner_ops, - sizeof(struct dvb_tuner_ops)); - - fe->tuner_priv = priv; - - return fe; -} -EXPORT_SYMBOL_GPL(tda18271_attach); -MODULE_DESCRIPTION("NXP TDA18271HD analog / digital tuner driver"); -MODULE_AUTHOR("Michael Krufky "); -MODULE_LICENSE("GPL"); - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * --------------------------------------------------------------------------- - * Local variables: - * c-basic-offset: 8 - * End: - */ -- cgit v1.2.3-59-g8ed1b From 54465b082cc86921aa7d7b638d75803e6d919f25 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Fri, 23 Nov 2007 18:14:53 -0300 Subject: V4L/DVB (6681): tda18271: rename 'debug' to 'tda18271_debug' Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index ba980cf5811b..726e102cbc5d 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -25,12 +25,12 @@ #include "tda18271.h" #include "tda18271-priv.h" -static int debug; -module_param(debug, int, 0644); +static int tda18271_debug; +module_param_named(debug, tda18271_debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); #define dprintk(level, fmt, arg...) do {\ - if (debug >= level) \ + if (tda18271_debug >= level) \ printk(KERN_DEBUG "%s: " fmt, __FUNCTION__, ##arg); } while (0) /*---------------------------------------------------------------------*/ @@ -118,7 +118,7 @@ static void tda18271_read_regs(struct dvb_frontend *fe) printk("ERROR: %s: i2c_transfer returned: %d\n", __FUNCTION__, ret); - if (debug > 2) + if (tda18271_debug > 2) tda18271_dump_regs(fe); } -- cgit v1.2.3-59-g8ed1b From 5c15648a42016eebb9870dc3af44e94bca4f3604 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 2 Dec 2007 00:02:18 -0300 Subject: V4L/DVB (6683): Fix DVB compatibility DVB-S is not supported. Also, there are some QAM6 firmwares for xc3028, but it is reported that this doesn't work fine. Thanks to Manu Abraham, Michael Krufky and Patrick Boettcher for their insights. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-xc2028.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/tuner-xc2028.c b/drivers/media/video/tuner-xc2028.c index e1796ebb7c71..7acc175d805a 100644 --- a/drivers/media/video/tuner-xc2028.c +++ b/drivers/media/video/tuner-xc2028.c @@ -957,12 +957,14 @@ static int xc2028_set_params(struct dvb_frontend *fe, type |= D2620; switch(fe->ops.info.type) { - case FE_QPSK: - break; case FE_OFDM: bw = p->u.ofdm.bandwidth; break; case FE_QAM: + tuner_info("WARN: There are some reports that " + "QAM 6 MHz doesn't work.\n" + "If this works for you, please report by " + "e-mail to: v4l-dvb-maintainer@linuxtv.org\n"); bw = BANDWIDTH_6_MHZ; type |= QAM; break; @@ -970,6 +972,9 @@ static int xc2028_set_params(struct dvb_frontend *fe, bw = BANDWIDTH_6_MHZ; type |= ATSC| D2633; break; + /* DVB-S is not supported */ + default: + return -EINVAL; } /* FIXME: -- cgit v1.2.3-59-g8ed1b From 102df6a785bd5ff22b0ca745f3107ab9780fc30b Mon Sep 17 00:00:00 2001 From: Michel Lespinasse Date: Mon, 26 Nov 2007 18:57:10 -0300 Subject: V4L/DVB (6685): ir-keymaps.c: extra keys on winfast Y04G0033 remote This change adds support for 4 extra keys on the remote currently being shipped by leadtek with their "WinFast TV2000 XP/Expert" and "WinFast PVR2000" cards. The remote P/N seems to be Y04G0033 and you can see a picture of it here: http://lespinasse.org/y04g0033.jpg The extra keys are at the bottom and are labeled MCE +VOL, -VOL, +CH, -CH. I chose to map them to the F21-F24 keycodes, following the precedent of ir_codes_gotview7135[], so as to differentiate these 'MCE' keys from the other +VOL, -VOL, +CH, -CH 'arrow' keys higher up on the remote. Signed-off-by: Michel Lespinasse Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/ir-keymaps.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c index 185e8a860c1a..42762dfb7387 100644 --- a/drivers/media/common/ir-keymaps.c +++ b/drivers/media/common/ir-keymaps.c @@ -1331,7 +1331,12 @@ IR_KEYTAB_TYPE ir_codes_winfast[IR_KEYTAB_SIZE] = { [ 0x35 ] = KEY_FASTFORWARD, [ 0x36 ] = KEY_TV, [ 0x37 ] = KEY_RADIO, /* FM */ - [ 0x38 ] = KEY_DVD + [ 0x38 ] = KEY_DVD, + + [ 0x3e ] = KEY_F21, /* MCE +VOL, on Y04G0033 */ + [ 0x3a ] = KEY_F22, /* MCE -VOL, on Y04G0033 */ + [ 0x3b ] = KEY_F23, /* MCE +CH, on Y04G0033 */ + [ 0x3f ] = KEY_F24 /* MCE -CH, on Y04G0033 */ }; EXPORT_SYMBOL_GPL(ir_codes_winfast); -- cgit v1.2.3-59-g8ed1b From cc76466b310f61e71ac10778781fdbdb97d333fd Mon Sep 17 00:00:00 2001 From: Hermann Pitton Date: Wed, 28 Nov 2007 21:54:35 -0300 Subject: V4L/DVB (6687): saa7134: add mute support for radio/analog-in on MD9717 and MD7134 Currently the saa7134 chips only have mute support for the TV input. Cards with mute from external audio muxes are already fine on the other inputs and some recent tuners mute at least the radio on exit. But these mostly hybrid tuners are not fully backward compatible, since they must power down and mute regardless. For some included above, the MD7134 knows several, to switch on mute/automute to the TV input is functional and backward compatible for the applications, except that the tuners with tda9887 always mute on exit. Signed-off-by: Hermann Pitton Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-cards.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 533fb02394fb..9a2dd643025b 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -350,6 +350,10 @@ struct saa7134_board saa7134_boards[] = { .name = name_radio, .amux = LINE2, }, + .mute = { + .name = name_mute, + .amux = TV, + }, }, [SAA7134_BOARD_TVSTATION_RDS] = { /* Typhoon TV Tuner RDS: Art.Nr. 50694 */ @@ -566,6 +570,10 @@ struct saa7134_board saa7134_boards[] = { .radio = { .name = name_radio, .amux = LINE2, + }, + .mute = { + .name = name_mute, + .amux = TV, }, }, [SAA7134_BOARD_TYPHOON_90031] = { -- cgit v1.2.3-59-g8ed1b From 493977f016f2ff52fdca38d031c7211b4da658fd Mon Sep 17 00:00:00 2001 From: Brandon Philips Date: Fri, 30 Nov 2007 22:37:28 -0300 Subject: V4L/DVB (6688): V4L: fix copy and paste error in dprintk for videobuf-vmalloc.c Signed-off-by: Brandon Philips Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/videobuf-vmalloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/videobuf-vmalloc.c b/drivers/media/video/videobuf-vmalloc.c index e01259438bb2..9b3898347ca5 100644 --- a/drivers/media/video/videobuf-vmalloc.c +++ b/drivers/media/video/videobuf-vmalloc.c @@ -41,7 +41,7 @@ MODULE_AUTHOR("Mauro Carvalho Chehab "); MODULE_LICENSE("GPL"); #define dprintk(level, fmt, arg...) if (debug >= level) \ - printk(KERN_DEBUG "vbuf-sg: " fmt , ## arg) + printk(KERN_DEBUG "vbuf-vmalloc: " fmt , ## arg) /***************************************************************************/ -- cgit v1.2.3-59-g8ed1b From 681c739944018d80dbcf7f19997eba97676c7116 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Mon, 26 Nov 2007 01:48:52 -0300 Subject: V4L/DVB (6691): pvrusb2: Rework pipeline state control This is a new implementation for video pipeline control within the pvrusb2 driver. Actual start/stop of the pipeline is moved to the driver's kernel thread. Pipeline stages are controlled autonomously based on surrounding pipeline or application control state. Kernel thread management is also cleaned up and moved into the internal control structure of the driver, solving a set up / tear down race along the way. Better failure recovery is implemented with this new control strategy. Also with this change comes better control of the cx23416 encoder, building on additional information learned about the peculiarities of controlling this part (this information was the original trigger for this rework). With this change, overall encoder stability should be considerably improved. Yes, this is a large change for this driver, but due to the nature of the feature being worked on, the changes are fairly pervasive and would be difficult to break into smaller pieces with any semblence of step-wise stability. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-context.c | 55 +- drivers/media/video/pvrusb2/pvrusb2-context.h | 5 +- drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c | 4 +- drivers/media/video/pvrusb2/pvrusb2-debug.h | 39 +- drivers/media/video/pvrusb2/pvrusb2-debugifc.c | 177 +-- drivers/media/video/pvrusb2/pvrusb2-encoder.c | 54 +- drivers/media/video/pvrusb2/pvrusb2-encoder.h | 1 + drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h | 64 +- drivers/media/video/pvrusb2/pvrusb2-hdw.c | 1139 +++++++++++++------- drivers/media/video/pvrusb2/pvrusb2-hdw.h | 135 +-- drivers/media/video/pvrusb2/pvrusb2-i2c-core.c | 2 +- drivers/media/video/pvrusb2/pvrusb2-v4l2.c | 6 +- drivers/media/video/pvrusb2/pvrusb2-video-v4l.c | 4 +- 13 files changed, 944 insertions(+), 741 deletions(-) diff --git a/drivers/media/video/pvrusb2/pvrusb2-context.c b/drivers/media/video/pvrusb2/pvrusb2-context.c index 22719ba861ac..9d94aed2e12d 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-context.c +++ b/drivers/media/video/pvrusb2/pvrusb2-context.c @@ -31,52 +31,32 @@ static void pvr2_context_destroy(struct pvr2_context *mp) { - if (mp->hdw) pvr2_hdw_destroy(mp->hdw); pvr2_trace(PVR2_TRACE_STRUCT,"Destroying pvr_main id=%p",mp); - if (mp->workqueue) { - flush_workqueue(mp->workqueue); - destroy_workqueue(mp->workqueue); - } + if (mp->hdw) pvr2_hdw_destroy(mp->hdw); kfree(mp); } -static void pvr2_context_trigger_poll(struct pvr2_context *mp) -{ - queue_work(mp->workqueue,&mp->workpoll); -} - - -static void pvr2_context_poll(struct work_struct *work) -{ - struct pvr2_context *mp = - container_of(work, struct pvr2_context, workpoll); - pvr2_context_enter(mp); do { - pvr2_hdw_poll(mp->hdw); - } while (0); pvr2_context_exit(mp); -} - - -static void pvr2_context_setup(struct work_struct *work) +static void pvr2_context_state_check(struct pvr2_context *mp) { - struct pvr2_context *mp = - container_of(work, struct pvr2_context, workinit); + if (mp->init_flag) return; + + switch (pvr2_hdw_get_state(mp->hdw)) { + case PVR2_STATE_WARM: break; + case PVR2_STATE_ERROR: break; + case PVR2_STATE_READY: break; + case PVR2_STATE_RUN: break; + default: return; + } pvr2_context_enter(mp); do { - if (!pvr2_hdw_dev_ok(mp->hdw)) break; - pvr2_hdw_setup(mp->hdw); - pvr2_hdw_setup_poll_trigger( - mp->hdw, - (void (*)(void *))pvr2_context_trigger_poll, - mp); - if (!pvr2_hdw_dev_ok(mp->hdw)) break; - if (!pvr2_hdw_init_ok(mp->hdw)) break; + mp->init_flag = !0; mp->video_stream.stream = pvr2_hdw_get_video_stream(mp->hdw); if (mp->setup_func) { mp->setup_func(mp); } } while (0); pvr2_context_exit(mp); -} + } struct pvr2_context *pvr2_context_create( @@ -96,11 +76,10 @@ struct pvr2_context *pvr2_context_create( mp = NULL; goto done; } - - mp->workqueue = create_singlethread_workqueue("pvrusb2"); - INIT_WORK(&mp->workinit, pvr2_context_setup); - INIT_WORK(&mp->workpoll, pvr2_context_poll); - queue_work(mp->workqueue,&mp->workinit); + pvr2_hdw_set_state_callback(mp->hdw, + (void (*)(void *))pvr2_context_state_check, + mp); + pvr2_context_state_check(mp); done: return mp; } diff --git a/drivers/media/video/pvrusb2/pvrusb2-context.h b/drivers/media/video/pvrusb2/pvrusb2-context.h index 6327fa1f7e4f..a04187a93225 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-context.h +++ b/drivers/media/video/pvrusb2/pvrusb2-context.h @@ -45,14 +45,11 @@ struct pvr2_context { struct pvr2_context_stream video_stream; struct mutex mutex; int disconnect_flag; + int init_flag; /* Called after pvr2_context initialization is complete */ void (*setup_func)(struct pvr2_context *); - /* Work queue overhead for out-of-line processing */ - struct workqueue_struct *workqueue; - struct work_struct workinit; - struct work_struct workpoll; }; struct pvr2_channel { diff --git a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c b/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c index e8a9252c7df6..2cca817e4144 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c +++ b/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c @@ -140,7 +140,7 @@ static const struct pvr2_v4l_cx2584x_ops decoder_ops[] = { static void decoder_detach(struct pvr2_v4l_cx2584x *ctxt) { ctxt->client->handler = NULL; - ctxt->hdw->decoder_ctrl = NULL; + pvr2_hdw_set_decoder(ctxt->hdw,NULL); kfree(ctxt); } @@ -241,7 +241,7 @@ int pvr2_i2c_cx2584x_v4l_setup(struct pvr2_hdw *hdw, ctxt->client = cp; ctxt->hdw = hdw; ctxt->stale_mask = (1 << ARRAY_SIZE(decoder_ops)) - 1; - hdw->decoder_ctrl = &ctxt->ctrl; + pvr2_hdw_set_decoder(hdw,&ctxt->ctrl); cp->handler = &ctxt->handler; { /* diff --git a/drivers/media/video/pvrusb2/pvrusb2-debug.h b/drivers/media/video/pvrusb2/pvrusb2-debug.h index da6441b88f31..fca49d8a9311 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-debug.h +++ b/drivers/media/video/pvrusb2/pvrusb2-debug.h @@ -34,25 +34,26 @@ extern int pvrusb2_debug; #define PVR2_TRACE_INIT (1 << 5) /* misc initialization steps */ #define PVR2_TRACE_START_STOP (1 << 6) /* Streaming start / stop */ #define PVR2_TRACE_CTL (1 << 7) /* commit of control changes */ -#define PVR2_TRACE_DEBUG (1 << 8) /* Temporary debug code */ -#define PVR2_TRACE_EEPROM (1 << 9) /* eeprom parsing / report */ -#define PVR2_TRACE_STRUCT (1 << 10) /* internal struct creation */ -#define PVR2_TRACE_OPEN_CLOSE (1 << 11) /* application open / close */ -#define PVR2_TRACE_CREG (1 << 12) /* Main critical region entry / exit */ -#define PVR2_TRACE_SYSFS (1 << 13) /* Sysfs driven I/O */ -#define PVR2_TRACE_FIRMWARE (1 << 14) /* firmware upload actions */ -#define PVR2_TRACE_CHIPS (1 << 15) /* chip broadcast operation */ -#define PVR2_TRACE_I2C (1 << 16) /* I2C related stuff */ -#define PVR2_TRACE_I2C_CMD (1 << 17) /* Software commands to I2C modules */ -#define PVR2_TRACE_I2C_CORE (1 << 18) /* I2C core debugging */ -#define PVR2_TRACE_I2C_TRAF (1 << 19) /* I2C traffic through the adapter */ -#define PVR2_TRACE_V4LIOCTL (1 << 20) /* v4l ioctl details */ -#define PVR2_TRACE_ENCODER (1 << 21) /* mpeg2 encoder operation */ -#define PVR2_TRACE_BUF_POOL (1 << 22) /* Track buffer pool management */ -#define PVR2_TRACE_BUF_FLOW (1 << 23) /* Track buffer flow in system */ -#define PVR2_TRACE_DATA_FLOW (1 << 24) /* Track data flow */ -#define PVR2_TRACE_DEBUGIFC (1 << 25) /* Debug interface actions */ -#define PVR2_TRACE_GPIO (1 << 26) /* GPIO state bit changes */ +#define PVR2_TRACE_STATE (1 << 8) /* Device state changes */ +#define PVR2_TRACE_STBITS (1 << 9) /* Individual bit state changes */ +#define PVR2_TRACE_EEPROM (1 << 10) /* eeprom parsing / report */ +#define PVR2_TRACE_STRUCT (1 << 11) /* internal struct creation */ +#define PVR2_TRACE_OPEN_CLOSE (1 << 12) /* application open / close */ +#define PVR2_TRACE_CREG (1 << 13) /* Main critical region entry / exit */ +#define PVR2_TRACE_SYSFS (1 << 14) /* Sysfs driven I/O */ +#define PVR2_TRACE_FIRMWARE (1 << 15) /* firmware upload actions */ +#define PVR2_TRACE_CHIPS (1 << 16) /* chip broadcast operation */ +#define PVR2_TRACE_I2C (1 << 17) /* I2C related stuff */ +#define PVR2_TRACE_I2C_CMD (1 << 18) /* Software commands to I2C modules */ +#define PVR2_TRACE_I2C_CORE (1 << 19) /* I2C core debugging */ +#define PVR2_TRACE_I2C_TRAF (1 << 20) /* I2C traffic through the adapter */ +#define PVR2_TRACE_V4LIOCTL (1 << 21) /* v4l ioctl details */ +#define PVR2_TRACE_ENCODER (1 << 22) /* mpeg2 encoder operation */ +#define PVR2_TRACE_BUF_POOL (1 << 23) /* Track buffer pool management */ +#define PVR2_TRACE_BUF_FLOW (1 << 24) /* Track buffer flow in system */ +#define PVR2_TRACE_DATA_FLOW (1 << 25) /* Track data flow */ +#define PVR2_TRACE_DEBUGIFC (1 << 26) /* Debug interface actions */ +#define PVR2_TRACE_GPIO (1 << 27) /* GPIO state bit changes */ #endif /* __PVRUSB2_HDW_INTERNAL_H */ diff --git a/drivers/media/video/pvrusb2/pvrusb2-debugifc.c b/drivers/media/video/pvrusb2/pvrusb2-debugifc.c index 6f135f4a2497..b0687430fdd4 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-debugifc.c +++ b/drivers/media/video/pvrusb2/pvrusb2-debugifc.c @@ -31,14 +31,6 @@ struct debugifc_mask_item { unsigned long msk; }; -static struct debugifc_mask_item mask_items[] = { - {"ENC_FIRMWARE",(1<name)) { - return mip->msk; - } - } - return 0; -} - - -static int debugifc_print_mask(char *buf,unsigned int sz, - unsigned long msk,unsigned long val) -{ - struct debugifc_mask_item *mip; - unsigned int idx; - int bcnt = 0; - int ccnt; - for (idx = 0; idx < ARRAY_SIZE(mask_items); idx++) { - mip = mask_items + idx; - if (!(mip->msk & msk)) continue; - ccnt = scnprintf(buf,sz,"%s%c%s", - (bcnt ? " " : ""), - ((mip->msk & val) ? '+' : '-'), - mip->name); - sz -= ccnt; - buf += ccnt; - bcnt += ccnt; - } - return bcnt; -} - -static unsigned int debugifc_parse_subsys_mask(const char *buf, - unsigned int count, - unsigned long *mskPtr, - unsigned long *valPtr) -{ - const char *wptr; - unsigned int consume_cnt = 0; - unsigned int scnt; - unsigned int wlen; - int mode; - unsigned long m1,msk,val; - - msk = 0; - val = 0; - - while (count) { - scnt = debugifc_isolate_word(buf,count,&wptr,&wlen); - if (!scnt) break; - consume_cnt += scnt; count -= scnt; buf += scnt; - if (!wptr) break; - - mode = 0; - if (wlen) switch (wptr[0]) { - case '+': - wptr++; - wlen--; - break; - case '-': - mode = 1; - wptr++; - wlen--; - break; - } - if (!wlen) continue; - m1 = debugifc_find_mask(wptr,wlen); - if (!m1) break; - msk |= m1; - if (!mode) val |= m1; - } - *mskPtr = msk; - *valPtr = val; - return consume_cnt; -} - - int pvr2_debugifc_print_info(struct pvr2_hdw *hdw,char *buf,unsigned int acnt) { int bcnt = 0; int ccnt; - struct pvr2_hdw_debug_info dbg; - - pvr2_hdw_get_debug_info(hdw,&dbg); - - ccnt = scnprintf(buf,acnt,"big lock %s; ctl lock %s", - (dbg.big_lock_held ? "held" : "free"), - (dbg.ctl_lock_held ? "held" : "free")); - bcnt += ccnt; acnt -= ccnt; buf += ccnt; - if (dbg.ctl_lock_held) { - ccnt = scnprintf(buf,acnt,"; cmd_state=%d cmd_code=%d" - " cmd_wlen=%d cmd_rlen=%d" - " wpend=%d rpend=%d tmout=%d rstatus=%d" - " wstatus=%d", - dbg.cmd_debug_state,dbg.cmd_code, - dbg.cmd_debug_write_len, - dbg.cmd_debug_read_len, - dbg.cmd_debug_write_pend, - dbg.cmd_debug_read_pend, - dbg.cmd_debug_timeout, - dbg.cmd_debug_rstatus, - dbg.cmd_debug_wstatus); - bcnt += ccnt; acnt -= ccnt; buf += ccnt; - } - ccnt = scnprintf(buf,acnt,"\n"); - bcnt += ccnt; acnt -= ccnt; buf += ccnt; - ccnt = scnprintf( - buf,acnt,"driver flags: %s %s %s\n", - (dbg.flag_init_ok ? "initialized" : "uninitialized"), - (dbg.flag_ok ? "ok" : "fail"), - (dbg.flag_disconnected ? "disconnected" : "connected")); - bcnt += ccnt; acnt -= ccnt; buf += ccnt; - ccnt = scnprintf(buf,acnt,"Subsystems enabled / configured: "); + ccnt = scnprintf(buf,acnt,"Driver state info:\n"); bcnt += ccnt; acnt -= ccnt; buf += ccnt; - ccnt = debugifc_print_mask(buf,acnt,dbg.subsys_flags,dbg.subsys_flags); + ccnt = pvr2_hdw_state_report(hdw,buf,acnt); bcnt += ccnt; acnt -= ccnt; buf += ccnt; - ccnt = scnprintf(buf,acnt,"\n"); - bcnt += ccnt; acnt -= ccnt; buf += ccnt; - ccnt = scnprintf(buf,acnt,"Subsystems disabled / unconfigured: "); - bcnt += ccnt; acnt -= ccnt; buf += ccnt; - ccnt = debugifc_print_mask(buf,acnt,~dbg.subsys_flags,dbg.subsys_flags); - bcnt += ccnt; acnt -= ccnt; buf += ccnt; - ccnt = scnprintf(buf,acnt,"\n"); - bcnt += ccnt; acnt -= ccnt; buf += ccnt; - ccnt = scnprintf(buf,acnt,"Attached I2C modules:\n"); bcnt += ccnt; acnt -= ccnt; buf += ccnt; ccnt = pvr2_i2c_report(hdw,buf,acnt); @@ -290,7 +162,6 @@ int pvr2_debugifc_print_status(struct pvr2_hdw *hdw, { int bcnt = 0; int ccnt; - unsigned long msk; int ret; u32 gpio_dir,gpio_in,gpio_out; @@ -311,28 +182,6 @@ int pvr2_debugifc_print_status(struct pvr2_hdw *hdw, pvr2_hdw_get_streaming(hdw) ? "on" : "off"); bcnt += ccnt; acnt -= ccnt; buf += ccnt; - msk = pvr2_hdw_subsys_get(hdw); - ccnt = scnprintf(buf,acnt,"Subsystems enabled / configured: "); - bcnt += ccnt; acnt -= ccnt; buf += ccnt; - ccnt = debugifc_print_mask(buf,acnt,msk,msk); - bcnt += ccnt; acnt -= ccnt; buf += ccnt; - ccnt = scnprintf(buf,acnt,"\n"); - bcnt += ccnt; acnt -= ccnt; buf += ccnt; - ccnt = scnprintf(buf,acnt,"Subsystems disabled / unconfigured: "); - bcnt += ccnt; acnt -= ccnt; buf += ccnt; - ccnt = debugifc_print_mask(buf,acnt,~msk,msk); - bcnt += ccnt; acnt -= ccnt; buf += ccnt; - ccnt = scnprintf(buf,acnt,"\n"); - bcnt += ccnt; acnt -= ccnt; buf += ccnt; - - msk = pvr2_hdw_subsys_stream_get(hdw); - ccnt = scnprintf(buf,acnt,"Subsystems stopped on stream shutdown: "); - bcnt += ccnt; acnt -= ccnt; buf += ccnt; - ccnt = debugifc_print_mask(buf,acnt,msk,msk); - bcnt += ccnt; acnt -= ccnt; buf += ccnt; - ccnt = scnprintf(buf,acnt,"\n"); - bcnt += ccnt; acnt -= ccnt; buf += ccnt; - return bcnt; } @@ -369,28 +218,10 @@ static int pvr2_debugifc_do1cmd(struct pvr2_hdw *hdw,const char *buf, return pvr2_upload_firmware2(hdw); } else if (debugifc_match_keyword(wptr,wlen,"decoder")) { return pvr2_hdw_cmd_decoder_reset(hdw); + } else if (debugifc_match_keyword(wptr,wlen,"worker")) { + return pvr2_hdw_untrip(hdw); } return -EINVAL; - } else if (debugifc_match_keyword(wptr,wlen,"subsys_flags")) { - unsigned long msk = 0; - unsigned long val = 0; - if (debugifc_parse_subsys_mask(buf,count,&msk,&val) != count) { - pvr2_trace(PVR2_TRACE_DEBUGIFC, - "debugifc parse error on subsys mask"); - return -EINVAL; - } - pvr2_hdw_subsys_bit_chg(hdw,msk,val); - return 0; - } else if (debugifc_match_keyword(wptr,wlen,"stream_flags")) { - unsigned long msk = 0; - unsigned long val = 0; - if (debugifc_parse_subsys_mask(buf,count,&msk,&val) != count) { - pvr2_trace(PVR2_TRACE_DEBUGIFC, - "debugifc parse error on stream mask"); - return -EINVAL; - } - pvr2_hdw_subsys_stream_bit_chg(hdw,msk,val); - return 0; } else if (debugifc_match_keyword(wptr,wlen,"cpufw")) { scnt = debugifc_isolate_word(buf,count,&wptr,&wlen); if (!scnt) return -EINVAL; diff --git a/drivers/media/video/pvrusb2/pvrusb2-encoder.c b/drivers/media/video/pvrusb2/pvrusb2-encoder.c index 205087a3e136..5ca548cc7e7f 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-encoder.c +++ b/drivers/media/video/pvrusb2/pvrusb2-encoder.c @@ -209,7 +209,7 @@ static int pvr2_encoder_cmd(void *ctxt, LOCK_TAKE(hdw->ctl_lock); do { - if (!hdw->flag_encoder_ok) { + if (!hdw->state_encoder_ok) { ret = -EIO; break; } @@ -278,7 +278,11 @@ static int pvr2_encoder_cmd(void *ctxt, ret = -EBUSY; } if (ret) { - hdw->flag_encoder_ok = 0; + hdw->state_encoder_ok = 0; + pvr2_trace(PVR2_TRACE_STBITS, + "State bit %s <-- %s", + "state_encoder_ok", + (hdw->state_encoder_ok ? "true" : "false")); pvr2_trace( PVR2_TRACE_ERROR_LEGS, "Giving up on command." @@ -394,6 +398,24 @@ static int pvr2_encoder_prep_config(struct pvr2_hdw *hdw) return ret; } +int pvr2_encoder_adjust(struct pvr2_hdw *hdw) +{ + int ret; + ret = cx2341x_update(hdw,pvr2_encoder_cmd, + (hdw->enc_cur_valid ? &hdw->enc_cur_state : NULL), + &hdw->enc_ctl_state); + if (ret) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "Error from cx2341x module code=%d",ret); + } else { + memcpy(&hdw->enc_cur_state,&hdw->enc_ctl_state, + sizeof(struct cx2341x_mpeg_params)); + hdw->enc_cur_valid = !0; + } + return ret; +} + + int pvr2_encoder_configure(struct pvr2_hdw *hdw) { int ret; @@ -436,18 +458,10 @@ int pvr2_encoder_configure(struct pvr2_hdw *hdw) return ret; } - ret = cx2341x_update(hdw,pvr2_encoder_cmd, - (hdw->enc_cur_valid ? &hdw->enc_cur_state : NULL), - &hdw->enc_ctl_state); - if (ret) { - pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "Error from cx2341x module code=%d",ret); - return ret; - } - - ret = 0; + ret = pvr2_encoder_adjust(hdw); + if (ret) return ret; - if (!ret) ret = pvr2_encoder_vcmd( + ret = pvr2_encoder_vcmd( hdw, CX2341X_ENC_INITIALIZE_INPUT, 0); if (ret) { @@ -456,10 +470,6 @@ int pvr2_encoder_configure(struct pvr2_hdw *hdw) return ret; } - hdw->subsys_enabled_mask |= (1<enc_cur_state,&hdw->enc_ctl_state, - sizeof(struct cx2341x_mpeg_params)); - hdw->enc_cur_valid = !0; return 0; } @@ -478,7 +488,7 @@ int pvr2_encoder_start(struct pvr2_hdw *hdw) pvr2_encoder_vcmd(hdw,CX2341X_ENC_MUTE_VIDEO,1, hdw->input_val == PVR2_CVAL_INPUT_RADIO ? 1 : 0); - switch (hdw->config) { + switch (hdw->active_stream_type) { case pvr2_config_vbi: status = pvr2_encoder_vcmd(hdw,CX2341X_ENC_START_CAPTURE,2, 0x01,0x14); @@ -492,9 +502,6 @@ int pvr2_encoder_start(struct pvr2_hdw *hdw) 0,0x13); break; } - if (!status) { - hdw->subsys_enabled_mask |= (1<config) { + switch (hdw->active_stream_type) { case pvr2_config_vbi: status = pvr2_encoder_vcmd(hdw,CX2341X_ENC_STOP_CAPTURE,3, 0x01,0x01,0x14); @@ -526,9 +533,6 @@ int pvr2_encoder_stop(struct pvr2_hdw *hdw) pvr2_hdw_gpio_chg_dir(hdw,0xffffffff,0x00000401); pvr2_hdw_gpio_chg_out(hdw,0xffffffff,0x00000000); - if (!status) { - hdw->subsys_enabled_mask &= ~(1< #include +#include #include #include "pvrusb2-hdw.h" #include "pvrusb2-io.h" @@ -179,6 +180,12 @@ struct pvr2_hdw { /* Device type, one of PVR2_HDW_TYPE_xxxxx */ unsigned int hdw_type; + /* Kernel worker thread handling */ + struct workqueue_struct *workqueue; + struct work_struct workpoll; /* Update driver state */ + struct work_struct worki2csync; /* Update i2c clients */ + struct work_struct workinit; /* Driver initialization sequence */ + /* Video spigot */ struct pvr2_stream *vid_stream; @@ -186,9 +193,6 @@ struct pvr2_hdw { struct mutex big_lock_mutex; int big_lock_held; /* For debugging */ - void (*poll_trigger_func)(void *); - void *poll_trigger_data; - char name[32]; /* I2C stuff */ @@ -225,14 +229,48 @@ struct pvr2_hdw { unsigned int cmd_debug_write_len; // unsigned int cmd_debug_read_len; // + /* Bits of state that describe what is going on with various parts + of the driver. */ + volatile int state_encoder_ok; /* Encoder is operational */ + volatile int state_encoder_run; /* Encoder is running */ + volatile int state_encoder_config; /* Encoder is configured */ + volatile int state_encoder_waitok; /* Encoder pre-wait done */ + volatile int state_decoder_run; /* Decoder is running */ + volatile int state_usbstream_run; /* FX2 is streaming */ + volatile int state_decoder_quiescent; /* Decoder idle for > 50msec */ + volatile int state_pipeline_config; /* Pipeline is configured */ + int state_pipeline_req; /* Somebody wants to stream */ + int state_pipeline_pause; /* Pipeline must be paused */ + int state_pipeline_idle; /* Pipeline not running */ + + /* This is the master state of the driver. It is the combined + result of other bits of state. Examining this will indicate the + overall state of the driver. Values here are one of + PVR2_STATE_xxxx */ + unsigned int master_state; + + /* True if states must be re-evaluated */ + int state_stale; + + void (*state_func)(void *); + void *state_data; + + /* Timer for measuring decoder settling time */ + struct timer_list quiescent_timer; + + /* Timer for measuring encoder pre-wait time */ + struct timer_list encoder_wait_timer; + + /* Place to block while waiting for state changes */ + wait_queue_head_t state_wait_data; + + int flag_ok; /* device in known good state */ int flag_disconnected; /* flag_ok == 0 due to disconnect */ int flag_init_ok; /* true if structure is fully initialized */ - int flag_streaming_enabled; /* true if streaming should be on */ int fw1_state; /* current situation with fw1 */ - int flag_encoder_ok; /* True if encoder is healthy */ - - int flag_decoder_is_tuned; + int flag_decoder_missed;/* We've noticed missing decoder */ + int flag_tripped; /* Indicates overall failure to start */ struct pvr2_decoder_ctrl *decoder_ctrl; @@ -241,12 +279,6 @@ struct pvr2_hdw { unsigned int fw_size; int fw_cpu_flag; /* True if we are dealing with the CPU */ - // Which subsystem pieces have been enabled / configured - unsigned long subsys_enabled_mask; - - // Which subsystems are manipulated to enable streaming - unsigned long subsys_stream_mask; - // True if there is a request to trigger logging of state in each // module. int log_requested; @@ -296,13 +328,16 @@ struct pvr2_hdw { /* Location of eeprom or a negative number if none */ int eeprom_addr; - enum pvr2_config config; + enum pvr2_config active_stream_type; + enum pvr2_config desired_stream_type; /* Control state needed for cx2341x module */ struct cx2341x_mpeg_params enc_cur_state; struct cx2341x_mpeg_params enc_ctl_state; /* True if an encoder attribute has changed */ int enc_stale; + /* True if an unsafe encoder attribute has changed */ + int enc_unsafe_stale; /* True if enc_cur_state is valid */ int enc_cur_valid; @@ -332,6 +367,7 @@ struct pvr2_hdw { /* This function gets the current frequency */ unsigned long pvr2_hdw_get_cur_freq(struct pvr2_hdw *); +void pvr2_hdw_set_decoder(struct pvr2_hdw *,struct pvr2_decoder_ctrl *); #endif /* __PVRUSB2_HDW_INTERNAL_H */ diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index 402c59488253..4e55a2a84073 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -246,32 +246,46 @@ static const char *control_values_hsm[] = { }; -static const char *control_values_subsystem[] = { - [PVR2_SUBSYS_B_ENC_FIRMWARE] = "enc_firmware", - [PVR2_SUBSYS_B_ENC_CFG] = "enc_config", - [PVR2_SUBSYS_B_DIGITIZER_RUN] = "digitizer_run", - [PVR2_SUBSYS_B_USBSTREAM_RUN] = "usbstream_run", - [PVR2_SUBSYS_B_ENC_RUN] = "enc_run", +static const char *pvr2_state_names[] = { + [PVR2_STATE_NONE] = "none", + [PVR2_STATE_DEAD] = "dead", + [PVR2_STATE_COLD] = "cold", + [PVR2_STATE_WARM] = "warm", + [PVR2_STATE_ERROR] = "error", + [PVR2_STATE_READY] = "ready", + [PVR2_STATE_RUN] = "run", }; + +static void pvr2_hdw_state_sched(struct pvr2_hdw *); +static int pvr2_hdw_state_eval(struct pvr2_hdw *); static void pvr2_hdw_set_cur_freq(struct pvr2_hdw *,unsigned long); +static void pvr2_hdw_worker_i2c(struct work_struct *work); +static void pvr2_hdw_worker_poll(struct work_struct *work); +static void pvr2_hdw_worker_init(struct work_struct *work); +static int pvr2_hdw_wait(struct pvr2_hdw *,int state); +static int pvr2_hdw_untrip_unlocked(struct pvr2_hdw *); +static void pvr2_hdw_state_log_state(struct pvr2_hdw *); static int pvr2_hdw_cmd_usbstream(struct pvr2_hdw *hdw,int runFl); -static int pvr2_hdw_commit_ctl_internal(struct pvr2_hdw *hdw); +static int pvr2_hdw_commit_setup(struct pvr2_hdw *hdw); static int pvr2_hdw_get_eeprom_addr(struct pvr2_hdw *hdw); static void pvr2_hdw_internal_find_stdenum(struct pvr2_hdw *hdw); static void pvr2_hdw_internal_set_std_avail(struct pvr2_hdw *hdw); -static void pvr2_hdw_render_useless_unlocked(struct pvr2_hdw *hdw); -static void pvr2_hdw_subsys_bit_chg_no_lock(struct pvr2_hdw *hdw, - unsigned long msk, - unsigned long val); -static void pvr2_hdw_subsys_stream_bit_chg_no_lock(struct pvr2_hdw *hdw, - unsigned long msk, - unsigned long val); +static void pvr2_hdw_quiescent_timeout(unsigned long); +static void pvr2_hdw_encoder_wait_timeout(unsigned long); static int pvr2_send_request_ex(struct pvr2_hdw *hdw, unsigned int timeout,int probe_fl, void *write_data,unsigned int write_len, void *read_data,unsigned int read_len); + +static void trace_stbit(const char *name,int val) +{ + pvr2_trace(PVR2_TRACE_STBITS, + "State bit %s <-- %s", + name,(val ? "true" : "false")); +} + static int ctrl_channelfreq_get(struct pvr2_ctrl *cptr,int *vp) { struct pvr2_hdw *hdw = cptr->hdw; @@ -480,6 +494,7 @@ static int ctrl_cx2341x_is_dirty(struct pvr2_ctrl *cptr) static void ctrl_cx2341x_clear_dirty(struct pvr2_ctrl *cptr) { cptr->hdw->enc_stale = 0; + cptr->hdw->enc_unsafe_stale = 0; } static int ctrl_cx2341x_get(struct pvr2_ctrl *cptr,int *vp) @@ -502,6 +517,7 @@ static int ctrl_cx2341x_get(struct pvr2_ctrl *cptr,int *vp) static int ctrl_cx2341x_set(struct pvr2_ctrl *cptr,int m,int v) { int ret; + struct pvr2_hdw *hdw = cptr->hdw; struct v4l2_ext_controls cs; struct v4l2_ext_control c1; memset(&cs,0,sizeof(cs)); @@ -510,10 +526,22 @@ static int ctrl_cx2341x_set(struct pvr2_ctrl *cptr,int m,int v) cs.count = 1; c1.id = cptr->info->v4l_id; c1.value = v; - ret = cx2341x_ext_ctrls(&cptr->hdw->enc_ctl_state, 0, &cs, + ret = cx2341x_ext_ctrls(&hdw->enc_ctl_state, + hdw->state_encoder_run, &cs, VIDIOC_S_EXT_CTRLS); + if (ret == -EBUSY) { + /* Oops. cx2341x is telling us it's not safe to change + this control while we're capturing. Make a note of this + fact so that the pipeline will be stopped the next time + controls are committed. Then go on ahead and store this + change anyway. */ + ret = cx2341x_ext_ctrls(&hdw->enc_ctl_state, + 0, &cs, + VIDIOC_S_EXT_CTRLS); + if (!ret) hdw->enc_unsafe_stale = !0; + } if (ret) return ret; - cptr->hdw->enc_stale = !0; + hdw->enc_stale = !0; return 0; } @@ -544,7 +572,13 @@ static unsigned int ctrl_cx2341x_getv4lflags(struct pvr2_ctrl *cptr) static int ctrl_streamingenabled_get(struct pvr2_ctrl *cptr,int *vp) { - *vp = cptr->hdw->flag_streaming_enabled; + *vp = cptr->hdw->state_pipeline_req; + return 0; +} + +static int ctrl_masterstate_get(struct pvr2_ctrl *cptr,int *vp) +{ + *vp = cptr->hdw->master_state; return 0; } @@ -657,29 +691,6 @@ static int ctrl_audio_modes_present_get(struct pvr2_ctrl *cptr,int *vp) return 0; } -static int ctrl_subsys_get(struct pvr2_ctrl *cptr,int *vp) -{ - *vp = cptr->hdw->subsys_enabled_mask; - return 0; -} - -static int ctrl_subsys_set(struct pvr2_ctrl *cptr,int m,int v) -{ - pvr2_hdw_subsys_bit_chg_no_lock(cptr->hdw,m,v); - return 0; -} - -static int ctrl_subsys_stream_get(struct pvr2_ctrl *cptr,int *vp) -{ - *vp = cptr->hdw->subsys_stream_mask; - return 0; -} - -static int ctrl_subsys_stream_set(struct pvr2_ctrl *cptr,int m,int v) -{ - pvr2_hdw_subsys_stream_bit_chg_no_lock(cptr->hdw,m,v); - return 0; -} static int ctrl_stdenumcur_set(struct pvr2_ctrl *cptr,int m,int v) { @@ -914,6 +925,11 @@ static const struct pvr2_ctl_info control_defs[] = { .name = "usb_speed", .get_value = ctrl_hsm_get, DEFENUM(control_values_hsm), + },{ + .desc = "Master State", + .name = "master_state", + .get_value = ctrl_masterstate_get, + DEFENUM(pvr2_state_names), },{ .desc = "Signal Present", .name = "signal_present", @@ -954,20 +970,6 @@ static const struct pvr2_ctl_info control_defs[] = { .val_to_sym = ctrl_std_val_to_sym, .sym_to_val = ctrl_std_sym_to_val, .type = pvr2_ctl_bitmask, - },{ - .desc = "Subsystem enabled mask", - .name = "debug_subsys_mask", - .skip_init = !0, - .get_value = ctrl_subsys_get, - .set_value = ctrl_subsys_set, - DEFMASK(PVR2_SUBSYS_ALL,control_values_subsystem), - },{ - .desc = "Subsystem stream mask", - .name = "debug_subsys_stream_mask", - .skip_init = !0, - .get_value = ctrl_subsys_stream_get, - .set_value = ctrl_subsys_stream_set, - DEFMASK(PVR2_SUBSYS_ALL,control_values_subsystem), },{ .desc = "Video Standard Name", .name = "video_standard", @@ -1248,8 +1250,6 @@ int pvr2_upload_firmware2(struct pvr2_hdw *hdw) time we configure the encoder, then we'll fully configure it. */ hdw->enc_cur_valid = 0; - hdw->flag_encoder_ok = 0; - /* First prepare firmware loading */ ret |= pvr2_write_register(hdw, 0x0048, 0xffffffff); /*interrupt mask*/ ret |= pvr2_hdw_gpio_chg_dir(hdw,0xffffffff,0x00000088); /*gpio dir*/ @@ -1347,293 +1347,129 @@ int pvr2_upload_firmware2(struct pvr2_hdw *hdw) if (ret) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, "firmware2 upload post-proc failure"); - } else { - hdw->flag_encoder_ok = !0; - hdw->subsys_enabled_mask |= (1<flag_ok) return; - - msk &= PVR2_SUBSYS_ALL; - nmsk = (hdw->subsys_enabled_mask & ~msk) | (val & msk); - nmsk &= PVR2_SUBSYS_ALL; - - for (;;) { - tryCount++; - if (!((nmsk ^ hdw->subsys_enabled_mask) & - PVR2_SUBSYS_ALL)) break; - if (tryCount > 4) { - pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "Too many retries when configuring device;" - " giving up"); - pvr2_hdw_render_useless(hdw); - break; - } - if (tryCount > 1) { - pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "Retrying device reconfiguration"); - } - pvr2_trace(PVR2_TRACE_INIT, - "subsys mask changing 0x%lx:0x%lx" - " from 0x%lx to 0x%lx", - msk,val,hdw->subsys_enabled_mask,nmsk); - - vmsk = (nmsk ^ hdw->subsys_enabled_mask) & - hdw->subsys_enabled_mask; - if (vmsk) { - if (vmsk & (1<subsys_enabled_mask &= - ~FIRMWARE_RECOVERY_BITS; - continue; - } - } - if (vmsk & (1<decoder_ctrl) { - hdw->decoder_ctrl->enable( - hdw->decoder_ctrl->ctxt,0); - } else { - pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "WARNING:" - " No decoder present"); - } - hdw->subsys_enabled_mask &= - ~(1<subsys_enabled_mask &= - ~(vmsk & PVR2_SUBSYS_CFG_ALL); - } - } - vmsk = (nmsk ^ hdw->subsys_enabled_mask) & nmsk; - if (vmsk) { - if (vmsk & (1<subsys_enabled_mask &= - ~FIRMWARE_RECOVERY_BITS; - continue; - } - } - if (vmsk & (1<decoder_ctrl) { - hdw->decoder_ctrl->enable( - hdw->decoder_ctrl->ctxt,!0); - } else { - pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "WARNING:" - " No decoder present"); - } - hdw->subsys_enabled_mask |= - (1<subsys_enabled_mask &= - ~FIRMWARE_RECOVERY_BITS; - continue; - } - } - } +static const char *pvr2_get_state_name(unsigned int st) +{ + if (st < ARRAY_SIZE(pvr2_state_names)) { + return pvr2_state_names[st]; } + return "???"; } - -void pvr2_hdw_subsys_bit_chg(struct pvr2_hdw *hdw, - unsigned long msk,unsigned long val) +static int pvr2_decoder_enable(struct pvr2_hdw *hdw,int enablefl) { - LOCK_TAKE(hdw->big_lock); do { - pvr2_hdw_subsys_bit_chg_no_lock(hdw,msk,val); - } while (0); LOCK_GIVE(hdw->big_lock); + if (!hdw->decoder_ctrl) { + if (!hdw->flag_decoder_missed) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "WARNING: No decoder present"); + hdw->flag_decoder_missed = !0; + trace_stbit("flag_decoder_missed", + hdw->flag_decoder_missed); + } + return -EIO; + } + hdw->decoder_ctrl->enable(hdw->decoder_ctrl->ctxt,enablefl); + return 0; } -unsigned long pvr2_hdw_subsys_get(struct pvr2_hdw *hdw) +void pvr2_hdw_set_decoder(struct pvr2_hdw *hdw,struct pvr2_decoder_ctrl *ptr) { - return hdw->subsys_enabled_mask; + if (hdw->decoder_ctrl == ptr) return; + hdw->decoder_ctrl = ptr; + if (hdw->decoder_ctrl && hdw->flag_decoder_missed) { + hdw->flag_decoder_missed = 0; + trace_stbit("flag_decoder_missed", + hdw->flag_decoder_missed); + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "Decoder has appeared"); + pvr2_hdw_state_sched(hdw); + } } -unsigned long pvr2_hdw_subsys_stream_get(struct pvr2_hdw *hdw) +int pvr2_hdw_get_state(struct pvr2_hdw *hdw) { - return hdw->subsys_stream_mask; + return hdw->master_state; } -static void pvr2_hdw_subsys_stream_bit_chg_no_lock(struct pvr2_hdw *hdw, - unsigned long msk, - unsigned long val) +static int pvr2_hdw_untrip_unlocked(struct pvr2_hdw *hdw) { - unsigned long val2; - msk &= PVR2_SUBSYS_ALL; - val2 = ((hdw->subsys_stream_mask & ~msk) | (val & msk)); - pvr2_trace(PVR2_TRACE_INIT, - "stream mask changing 0x%lx:0x%lx from 0x%lx to 0x%lx", - msk,val,hdw->subsys_stream_mask,val2); - hdw->subsys_stream_mask = val2; + if (!hdw->flag_tripped) return 0; + hdw->flag_tripped = 0; + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "Clearing driver error statuss"); + return !0; } -void pvr2_hdw_subsys_stream_bit_chg(struct pvr2_hdw *hdw, - unsigned long msk, - unsigned long val) +int pvr2_hdw_untrip(struct pvr2_hdw *hdw) { + int fl; LOCK_TAKE(hdw->big_lock); do { - pvr2_hdw_subsys_stream_bit_chg_no_lock(hdw,msk,val); + fl = pvr2_hdw_untrip_unlocked(hdw); } while (0); LOCK_GIVE(hdw->big_lock); + if (fl) pvr2_hdw_state_sched(hdw); + return 0; } -static int pvr2_hdw_set_streaming_no_lock(struct pvr2_hdw *hdw,int enableFl) +const char *pvr2_hdw_get_state_name(unsigned int id) { - if ((!enableFl) == !(hdw->flag_streaming_enabled)) return 0; - if (enableFl) { - pvr2_trace(PVR2_TRACE_START_STOP, - "/*--TRACE_STREAM--*/ enable"); - pvr2_hdw_subsys_bit_chg_no_lock(hdw,~0,~0); - } else { - pvr2_trace(PVR2_TRACE_START_STOP, - "/*--TRACE_STREAM--*/ disable"); - pvr2_hdw_subsys_bit_chg_no_lock(hdw,hdw->subsys_stream_mask,0); - } - if (!hdw->flag_ok) return -EIO; - hdw->flag_streaming_enabled = enableFl != 0; - return 0; + if (id >= ARRAY_SIZE(pvr2_state_names)) return NULL; + return pvr2_state_names[id]; } int pvr2_hdw_get_streaming(struct pvr2_hdw *hdw) { - return hdw->flag_streaming_enabled != 0; + return hdw->state_pipeline_req != 0; } int pvr2_hdw_set_streaming(struct pvr2_hdw *hdw,int enable_flag) { - int ret; + int ret,st; LOCK_TAKE(hdw->big_lock); do { - ret = pvr2_hdw_set_streaming_no_lock(hdw,enable_flag); + pvr2_hdw_untrip_unlocked(hdw); + if ((!enable_flag) != !(hdw->state_pipeline_req)) { + hdw->state_pipeline_req = enable_flag != 0; + pvr2_trace(PVR2_TRACE_START_STOP, + "/*--TRACE_STREAM--*/ %s", + enable_flag ? "enable" : "disable"); + } + pvr2_hdw_state_sched(hdw); } while (0); LOCK_GIVE(hdw->big_lock); - return ret; -} - - -static int pvr2_hdw_set_stream_type_no_lock(struct pvr2_hdw *hdw, - enum pvr2_config config) -{ - unsigned long sm = hdw->subsys_enabled_mask; - if (!hdw->flag_ok) return -EIO; - pvr2_hdw_subsys_bit_chg_no_lock(hdw,hdw->subsys_stream_mask,0); - hdw->config = config; - pvr2_hdw_subsys_bit_chg_no_lock(hdw,~0,sm); + if ((ret = pvr2_hdw_wait(hdw,0)) < 0) return ret; + if (enable_flag) { + while ((st = hdw->master_state) != PVR2_STATE_RUN) { + if (st != PVR2_STATE_READY) return -EIO; + if ((ret = pvr2_hdw_wait(hdw,st)) < 0) return ret; + } + } return 0; } int pvr2_hdw_set_stream_type(struct pvr2_hdw *hdw,enum pvr2_config config) { - int ret; - if (!hdw->flag_ok) return -EIO; + int fl; LOCK_TAKE(hdw->big_lock); - ret = pvr2_hdw_set_stream_type_no_lock(hdw,config); + if ((fl = (hdw->desired_stream_type != config)) != 0) { + hdw->desired_stream_type = config; + hdw->state_pipeline_config = 0; + trace_stbit("state_pipeline_config", + hdw->state_pipeline_config); + pvr2_hdw_state_sched(hdw); + } LOCK_GIVE(hdw->big_lock); - return ret; + if (fl) return 0; + return pvr2_hdw_wait(hdw,0); } @@ -1866,12 +1702,6 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw) (hdw->hdw_type == PVR2_HDW_TYPE_24XXX)) { pvr2_hdw_cmd_powerup(hdw); if (!pvr2_hdw_dev_ok(hdw)) return; - - if (pvr2_upload_firmware2(hdw)){ - pvr2_trace(PVR2_TRACE_ERROR_LEGS,"device unstable!!"); - pvr2_hdw_render_useless(hdw); - return; - } } // This step MUST happen after the earlier powerup step. @@ -1924,8 +1754,7 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw) if (!pvr2_hdw_dev_ok(hdw)) return; - pvr2_hdw_commit_ctl_internal(hdw); - if (!pvr2_hdw_dev_ok(hdw)) return; + pvr2_hdw_commit_setup(hdw); hdw->vid_stream = pvr2_stream_create(); if (!pvr2_hdw_dev_ok(hdw)) return; @@ -1945,25 +1774,25 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw) if (!pvr2_hdw_dev_ok(hdw)) return; - /* Make sure everything is up to date */ - pvr2_i2c_core_sync(hdw); - - if (!pvr2_hdw_dev_ok(hdw)) return; - hdw->flag_init_ok = !0; + + pvr2_hdw_state_sched(hdw); } -int pvr2_hdw_setup(struct pvr2_hdw *hdw) +/* Set up the structure and attempt to put the device into a usable state. + This can be a time-consuming operation, which is why it is not done + internally as part of the create() step. */ +static void pvr2_hdw_setup(struct pvr2_hdw *hdw) { pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_setup(hdw=%p) begin",hdw); - LOCK_TAKE(hdw->big_lock); do { + do { pvr2_hdw_setup_low(hdw); pvr2_trace(PVR2_TRACE_INIT, "pvr2_hdw_setup(hdw=%p) done, ok=%d init_ok=%d", - hdw,hdw->flag_ok,hdw->flag_init_ok); + hdw,pvr2_hdw_dev_ok(hdw),hdw->flag_init_ok); if (pvr2_hdw_dev_ok(hdw)) { - if (pvr2_hdw_init_ok(hdw)) { + if (hdw->flag_init_ok) { pvr2_trace( PVR2_TRACE_INFO, "Device initialization" @@ -2013,9 +1842,8 @@ int pvr2_hdw_setup(struct pvr2_hdw *hdw) " the pvrusb2 device" " in order to recover."); } - } while (0); LOCK_GIVE(hdw->big_lock); + } while (0); pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_setup(hdw=%p) end",hdw); - return hdw->flag_init_ok; } @@ -2044,6 +1872,19 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_create: hdw=%p, type \"%s\"", hdw,pvr2_device_names[hdw_type]); if (!hdw) goto fail; + + init_timer(&hdw->quiescent_timer); + hdw->quiescent_timer.data = (unsigned long)hdw; + hdw->quiescent_timer.function = pvr2_hdw_quiescent_timeout; + + init_timer(&hdw->encoder_wait_timer); + hdw->encoder_wait_timer.data = (unsigned long)hdw; + hdw->encoder_wait_timer.function = pvr2_hdw_encoder_wait_timeout; + + hdw->master_state = PVR2_STATE_DEAD; + + init_waitqueue_head(&hdw->state_wait_data); + hdw->tuner_signal_stale = !0; cx2341x_fill_defaults(&hdw->enc_ctl_state); @@ -2184,18 +2025,16 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, if (cnt1 >= sizeof(hdw->name)) cnt1 = sizeof(hdw->name)-1; hdw->name[cnt1] = 0; + hdw->workqueue = create_singlethread_workqueue(hdw->name); + INIT_WORK(&hdw->workpoll,pvr2_hdw_worker_poll); + INIT_WORK(&hdw->worki2csync,pvr2_hdw_worker_i2c); + INIT_WORK(&hdw->workinit,pvr2_hdw_worker_init); + pvr2_trace(PVR2_TRACE_INIT,"Driver unit number is %d, name is %s", hdw->unit_number,hdw->name); hdw->tuner_type = -1; hdw->flag_ok = !0; - /* Initialize the mask of subsystems that we will shut down when we - stop streaming. */ - hdw->subsys_stream_mask = PVR2_SUBSYS_RUN_ALL; - hdw->subsys_stream_mask |= (1<subsys_stream_mask); hdw->usb_intf = intf; hdw->usb_dev = interface_to_usbdev(intf); @@ -2211,15 +2050,25 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, mutex_init(&hdw->ctl_lock_mutex); mutex_init(&hdw->big_lock_mutex); + queue_work(hdw->workqueue,&hdw->workinit); return hdw; fail: if (hdw) { + del_timer_sync(&hdw->quiescent_timer); + del_timer_sync(&hdw->encoder_wait_timer); + if (hdw->workqueue) { + flush_workqueue(hdw->workqueue); + destroy_workqueue(hdw->workqueue); + hdw->workqueue = NULL; + } usb_free_urb(hdw->ctl_read_urb); usb_free_urb(hdw->ctl_write_urb); kfree(hdw->ctl_read_buffer); kfree(hdw->ctl_write_buffer); kfree(hdw->controls); kfree(hdw->mpeg_ctrl_info); + kfree(hdw->std_defs); + kfree(hdw->std_enum_names); kfree(hdw); } return NULL; @@ -2250,10 +2099,10 @@ static void pvr2_hdw_remove_usb_stuff(struct pvr2_hdw *hdw) kfree(hdw->ctl_write_buffer); hdw->ctl_write_buffer = NULL; } - pvr2_hdw_render_useless_unlocked(hdw); hdw->flag_disconnected = !0; hdw->usb_dev = NULL; hdw->usb_intf = NULL; + pvr2_hdw_render_useless(hdw); } @@ -2262,6 +2111,13 @@ void pvr2_hdw_destroy(struct pvr2_hdw *hdw) { if (!hdw) return; pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_destroy: hdw=%p",hdw); + del_timer_sync(&hdw->quiescent_timer); + del_timer_sync(&hdw->encoder_wait_timer); + if (hdw->workqueue) { + flush_workqueue(hdw->workqueue); + destroy_workqueue(hdw->workqueue); + hdw->workqueue = NULL; + } if (hdw->fw_buffer) { kfree(hdw->fw_buffer); hdw->fw_buffer = NULL; @@ -2290,12 +2146,6 @@ void pvr2_hdw_destroy(struct pvr2_hdw *hdw) } -int pvr2_hdw_init_ok(struct pvr2_hdw *hdw) -{ - return hdw->flag_init_ok; -} - - int pvr2_hdw_dev_ok(struct pvr2_hdw *hdw) { return (hdw && hdw->flag_ok); @@ -2473,17 +2323,11 @@ static const char *get_ctrl_typename(enum pvr2_ctl_type tp) } -/* Commit all control changes made up to this point. Subsystems can be - indirectly affected by these changes. For a given set of things being - committed, we'll clear the affected subsystem bits and then once we're - done committing everything we'll make a request to restore the subsystem - state(s) back to their previous value before this function was called. - Thus we can automatically reconfigure affected pieces of the driver as - controls are changed. */ -static int pvr2_hdw_commit_ctl_internal(struct pvr2_hdw *hdw) +/* Figure out if we need to commit control changes. If so, mark internal + state flags to indicate this fact and return true. Otherwise do nothing + else and return false. */ +static int pvr2_hdw_commit_setup(struct pvr2_hdw *hdw) { - unsigned long saved_subsys_mask = hdw->subsys_enabled_mask; - unsigned long stale_subsys_mask = 0; unsigned int idx; struct pvr2_ctrl *cptr; int value; @@ -2518,6 +2362,25 @@ static int pvr2_hdw_commit_ctl_internal(struct pvr2_hdw *hdw) return 0; } + hdw->state_pipeline_config = 0; + trace_stbit("state_pipeline_config",hdw->state_pipeline_config); + pvr2_hdw_state_sched(hdw); + + return !0; +} + + +/* Perform all operations needed to commit all control changes. This must + be performed in synchronization with the pipeline state and is thus + expected to be called as part of the driver's worker thread. Return + true if commit successful, otherwise return false to indicate that + commit isn't possible at this time. */ +static int pvr2_hdw_commit_execute(struct pvr2_hdw *hdw) +{ + unsigned int idx; + struct pvr2_ctrl *cptr; + int disruptive_change; + /* When video standard changes, reset the hres and vres values - but if the user has pending changes there, then let the changes take priority. */ @@ -2536,24 +2399,26 @@ static int pvr2_hdw_commit_ctl_internal(struct pvr2_hdw *hdw) } } - if (hdw->std_dirty || - hdw->enc_stale || - hdw->srate_dirty || - hdw->res_ver_dirty || - hdw->res_hor_dirty || - 0) { - /* If any of this changes, then the encoder needs to be - reconfigured, and we need to reset the stream. */ - stale_subsys_mask |= (1<input_dirty) { - /* pk: If input changes to or from radio, then the encoder - needs to be restarted (for ENC_MUTE_VIDEO to work) */ - stale_subsys_mask |= (1< encoder connection be made quiescent before we + can proceed. */ + disruptive_change = + (hdw->std_dirty || + hdw->enc_unsafe_stale || + hdw->srate_dirty || + hdw->res_ver_dirty || + hdw->res_hor_dirty || + hdw->input_dirty || + (hdw->active_stream_type != hdw->desired_stream_type)); + if (disruptive_change && !hdw->state_pipeline_idle) { + /* Pipeline is not idle; we can't proceed. Arrange to + cause pipeline to stop so that we can try this again + later.... */ + hdw->state_pipeline_pause = !0; + return 0; } - if (hdw->srate_dirty) { /* Write new sample rate into control structure since * the master copy is stale. We must track srate @@ -2582,51 +2447,88 @@ static int pvr2_hdw_commit_ctl_internal(struct pvr2_hdw *hdw) cptr->info->clear_dirty(cptr); } + if (hdw->active_stream_type != hdw->desired_stream_type) { + /* Handle any side effects of stream config here */ + hdw->active_stream_type = hdw->desired_stream_type; + } + /* Now execute i2c core update */ pvr2_i2c_core_sync(hdw); - pvr2_hdw_subsys_bit_chg_no_lock(hdw,stale_subsys_mask,0); - pvr2_hdw_subsys_bit_chg_no_lock(hdw,~0,saved_subsys_mask); + if (hdw->state_encoder_run) { + /* If encoder isn't running, then this will get worked out + later when we start the encoder. */ + if (pvr2_encoder_adjust(hdw) < 0) return !0; + } - return 0; + hdw->state_pipeline_config = !0; + trace_stbit("state_pipeline_config",hdw->state_pipeline_config); + return !0; } int pvr2_hdw_commit_ctl(struct pvr2_hdw *hdw) { + int fl; + LOCK_TAKE(hdw->big_lock); + fl = pvr2_hdw_commit_setup(hdw); + LOCK_GIVE(hdw->big_lock); + if (!fl) return 0; + return pvr2_hdw_wait(hdw,0); +} + + +static void pvr2_hdw_worker_i2c(struct work_struct *work) +{ + struct pvr2_hdw *hdw = container_of(work,struct pvr2_hdw,worki2csync); LOCK_TAKE(hdw->big_lock); do { - pvr2_hdw_commit_ctl_internal(hdw); + pvr2_i2c_core_sync(hdw); } while (0); LOCK_GIVE(hdw->big_lock); - return 0; } -void pvr2_hdw_poll(struct pvr2_hdw *hdw) +static void pvr2_hdw_worker_poll(struct work_struct *work) { + int fl = 0; + struct pvr2_hdw *hdw = container_of(work,struct pvr2_hdw,workpoll); LOCK_TAKE(hdw->big_lock); do { - pvr2_i2c_core_sync(hdw); + fl = pvr2_hdw_state_eval(hdw); } while (0); LOCK_GIVE(hdw->big_lock); + if (fl && hdw->state_func) { + hdw->state_func(hdw->state_data); + } } -void pvr2_hdw_setup_poll_trigger(struct pvr2_hdw *hdw, - void (*func)(void *), - void *data) +static void pvr2_hdw_worker_init(struct work_struct *work) { + struct pvr2_hdw *hdw = container_of(work,struct pvr2_hdw,workinit); LOCK_TAKE(hdw->big_lock); do { - hdw->poll_trigger_func = func; - hdw->poll_trigger_data = data; + pvr2_hdw_setup(hdw); } while (0); LOCK_GIVE(hdw->big_lock); } -void pvr2_hdw_poll_trigger_unlocked(struct pvr2_hdw *hdw) +static int pvr2_hdw_wait(struct pvr2_hdw *hdw,int state) { - if (hdw->poll_trigger_func) { - hdw->poll_trigger_func(hdw->poll_trigger_data); - } + return wait_event_interruptible( + hdw->state_wait_data, + (hdw->state_stale == 0) && + (!state || (hdw->master_state != state))); +} + + +void pvr2_hdw_set_state_callback(struct pvr2_hdw *hdw, + void (*callback_func)(void *), + void *callback_data) +{ + LOCK_TAKE(hdw->big_lock); do { + hdw->state_data = callback_data; + hdw->state_func = callback_func; + } while (0); LOCK_GIVE(hdw->big_lock); } + /* Return name for this driver instance */ const char *pvr2_hdw_get_driver_name(struct pvr2_hdw *hdw) { @@ -2689,6 +2591,7 @@ void pvr2_hdw_trigger_module_log(struct pvr2_hdw *hdw) pvr2_i2c_core_sync(hdw); pvr2_trace(PVR2_TRACE_INFO,"cx2341x config:"); cx2341x_log_status(&hdw->enc_ctl_state, "pvrusb2"); + pvr2_hdw_state_log_state(hdw); printk(KERN_INFO "pvrusb2: ================== END STATUS CARD #%d ==================\n", nr); } while (0); LOCK_GIVE(hdw->big_lock); } @@ -2959,7 +2862,7 @@ static int pvr2_send_request_ex(struct pvr2_hdw *hdw, " without lock!!"); return -EDEADLK; } - if ((!hdw->flag_ok) && !probe_fl) { + if (!hdw->flag_ok && !probe_fl) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, "Attempted to execute control transfer" " when device not ok"); @@ -3167,7 +3070,7 @@ static int pvr2_send_request_ex(struct pvr2_hdw *hdw, hdw->cmd_debug_state = 0; if ((status < 0) && (!probe_fl)) { - pvr2_hdw_render_useless_unlocked(hdw); + pvr2_hdw_render_useless(hdw); } return status; } @@ -3227,24 +3130,17 @@ static int pvr2_read_register(struct pvr2_hdw *hdw, u16 reg, u32 *data) } -static void pvr2_hdw_render_useless_unlocked(struct pvr2_hdw *hdw) +void pvr2_hdw_render_useless(struct pvr2_hdw *hdw) { if (!hdw->flag_ok) return; - pvr2_trace(PVR2_TRACE_INIT,"render_useless"); - hdw->flag_ok = 0; + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "Device being rendered inoperable"); if (hdw->vid_stream) { pvr2_stream_setup(hdw->vid_stream,NULL,0,0); } - hdw->flag_streaming_enabled = 0; - hdw->subsys_enabled_mask = 0; -} - - -void pvr2_hdw_render_useless(struct pvr2_hdw *hdw) -{ - LOCK_TAKE(hdw->ctl_lock); - pvr2_hdw_render_useless_unlocked(hdw); - LOCK_GIVE(hdw->ctl_lock); + hdw->flag_ok = 0; + trace_stbit("flag_ok",hdw->flag_ok); + pvr2_hdw_state_sched(hdw); } @@ -3299,7 +3195,6 @@ int pvr2_hdw_cmd_deep_reset(struct pvr2_hdw *hdw) int status; LOCK_TAKE(hdw->ctl_lock); do { pvr2_trace(PVR2_TRACE_INIT,"Requesting uproc hard reset"); - hdw->flag_ok = !0; hdw->cmd_buffer[0] = FX2CMD_DEEP_RESET; status = pvr2_send_request(hdw,hdw->cmd_buffer,1,NULL,0); } while (0); LOCK_GIVE(hdw->ctl_lock); @@ -3349,26 +3244,473 @@ static int pvr2_hdw_cmd_usbstream(struct pvr2_hdw *hdw,int runFl) (runFl ? FX2CMD_STREAMING_ON : FX2CMD_STREAMING_OFF); status = pvr2_send_request(hdw,hdw->cmd_buffer,1,NULL,0); } while (0); LOCK_GIVE(hdw->ctl_lock); - if (!status) { - hdw->subsys_enabled_mask = - ((hdw->subsys_enabled_mask & - ~(1<state_encoder_ok) return 0; + if (hdw->flag_tripped) return 0; + if (hdw->state_encoder_run) return 0; + if (hdw->state_encoder_config) return 0; + if (hdw->state_decoder_run) return 0; + if (hdw->state_usbstream_run) return 0; + if (pvr2_upload_firmware2(hdw) < 0) { + hdw->flag_tripped = !0; + trace_stbit("flag_tripped",hdw->flag_tripped); + return !0; + } + hdw->state_encoder_ok = !0; + trace_stbit("state_encoder_ok",hdw->state_encoder_ok); + return !0; +} + + +/* Evaluate whether or not state_encoder_config can change */ +static int state_eval_encoder_config(struct pvr2_hdw *hdw) +{ + if (hdw->state_encoder_config) { + if (hdw->state_encoder_ok) { + if (hdw->state_pipeline_req && + !hdw->state_pipeline_pause) return 0; + } + hdw->state_encoder_config = 0; + hdw->state_encoder_waitok = 0; + trace_stbit("state_encoder_waitok",hdw->state_encoder_waitok); + /* paranoia - solve race if timer just completed */ + del_timer_sync(&hdw->encoder_wait_timer); + } else { + if (!hdw->state_encoder_ok || + !hdw->state_pipeline_idle || + hdw->state_pipeline_pause || + !hdw->state_pipeline_req || + !hdw->state_pipeline_config) { + /* We must reset the enforced wait interval if + anything has happened that might have disturbed + the encoder. This should be a rare case. */ + if (timer_pending(&hdw->encoder_wait_timer)) { + del_timer_sync(&hdw->encoder_wait_timer); + } + if (hdw->state_encoder_waitok) { + /* Must clear the state - therefore we did + something to a state bit and must also + return true. */ + hdw->state_encoder_waitok = 0; + trace_stbit("state_encoder_waitok", + hdw->state_encoder_waitok); + return !0; + } + return 0; + } + if (!hdw->state_encoder_waitok) { + if (!timer_pending(&hdw->encoder_wait_timer)) { + /* waitok flag wasn't set and timer isn't + running. Check flag once more to avoid + a race then start the timer. This is + the point when we measure out a minimal + quiet interval before doing something to + the encoder. */ + if (!hdw->state_encoder_waitok) { + hdw->encoder_wait_timer.expires = + jiffies + (HZ*50/1000); + add_timer(&hdw->encoder_wait_timer); + } + } + /* We can't continue until we know we have been + quiet for the interval measured by this + timer. */ + return 0; + } + pvr2_encoder_configure(hdw); + if (hdw->state_encoder_ok) hdw->state_encoder_config = !0; + } + trace_stbit("state_encoder_config",hdw->state_encoder_config); + return !0; +} + + +/* Evaluate whether or not state_encoder_run can change */ +static int state_eval_encoder_run(struct pvr2_hdw *hdw) +{ + if (hdw->state_encoder_run) { + if (hdw->state_encoder_ok) { + if (hdw->state_decoder_run) return 0; + if (pvr2_encoder_stop(hdw) < 0) return !0; + } + hdw->state_encoder_run = 0; + } else { + if (!hdw->state_encoder_ok) return 0; + if (!hdw->state_decoder_run) return 0; + if (pvr2_encoder_start(hdw) < 0) return !0; + hdw->state_encoder_run = !0; + } + trace_stbit("state_encoder_run",hdw->state_encoder_run); + return !0; +} + + +/* Timeout function for quiescent timer. */ +static void pvr2_hdw_quiescent_timeout(unsigned long data) +{ + struct pvr2_hdw *hdw = (struct pvr2_hdw *)data; + hdw->state_decoder_quiescent = !0; + trace_stbit("state_decoder_quiescent",hdw->state_decoder_quiescent); + hdw->state_stale = !0; + queue_work(hdw->workqueue,&hdw->workpoll); +} + + +/* Timeout function for encoder wait timer. */ +static void pvr2_hdw_encoder_wait_timeout(unsigned long data) +{ + struct pvr2_hdw *hdw = (struct pvr2_hdw *)data; + hdw->state_encoder_waitok = !0; + trace_stbit("state_encoder_waitok",hdw->state_encoder_waitok); + hdw->state_stale = !0; + queue_work(hdw->workqueue,&hdw->workpoll); +} + + +/* Evaluate whether or not state_decoder_run can change */ +static int state_eval_decoder_run(struct pvr2_hdw *hdw) +{ + if (hdw->state_decoder_run) { + if (hdw->state_encoder_ok) { + if (hdw->state_pipeline_req && + !hdw->state_pipeline_pause) return 0; + } + if (!hdw->flag_decoder_missed) { + pvr2_decoder_enable(hdw,0); + } + hdw->state_decoder_quiescent = 0; + hdw->state_decoder_run = 0; + /* paranoia - solve race if timer just completed */ + del_timer_sync(&hdw->quiescent_timer); + } else { + if (!hdw->state_decoder_quiescent) { + if (!timer_pending(&hdw->quiescent_timer)) { + /* We don't do something about the + quiescent timer until right here because + we also want to catch cases where the + decoder was already not running (like + after initialization) as opposed to + knowing that we had just stopped it. + The second flag check is here to cover a + race - the timer could have run and set + this flag just after the previous check + but before we did the pending check. */ + if (!hdw->state_decoder_quiescent) { + hdw->quiescent_timer.expires = + jiffies + (HZ*50/1000); + add_timer(&hdw->quiescent_timer); + } + } + /* Don't allow decoder to start again until it has + been quiesced first. This little detail should + hopefully further stabilize the encoder. */ + return 0; + } + if (!hdw->state_pipeline_req || + hdw->state_pipeline_pause || + !hdw->state_pipeline_config || + !hdw->state_encoder_config || + !hdw->state_encoder_ok) return 0; + del_timer_sync(&hdw->quiescent_timer); + if (hdw->flag_decoder_missed) return 0; + if (pvr2_decoder_enable(hdw,!0) < 0) return 0; + hdw->state_decoder_quiescent = 0; + hdw->state_decoder_run = !0; + } + trace_stbit("state_decoder_quiescent",hdw->state_decoder_quiescent); + trace_stbit("state_decoder_run",hdw->state_decoder_run); + return !0; +} + + +/* Evaluate whether or not state_usbstream_run can change */ +static int state_eval_usbstream_run(struct pvr2_hdw *hdw) +{ + if (hdw->state_usbstream_run) { + if (hdw->state_encoder_ok) { + if (hdw->state_encoder_run) return 0; + } + pvr2_hdw_cmd_usbstream(hdw,0); + hdw->state_usbstream_run = 0; + } else { + if (!hdw->state_encoder_ok || + !hdw->state_encoder_run || + !hdw->state_pipeline_req || + hdw->state_pipeline_pause) return 0; + if (pvr2_hdw_cmd_usbstream(hdw,!0) < 0) return 0; + hdw->state_usbstream_run = !0; + } + trace_stbit("state_usbstream_run",hdw->state_usbstream_run); + return !0; +} + + +/* Attempt to configure pipeline, if needed */ +static int state_eval_pipeline_config(struct pvr2_hdw *hdw) +{ + if (hdw->state_pipeline_config || + hdw->state_pipeline_pause) return 0; + pvr2_hdw_commit_execute(hdw); + return !0; +} + + +/* Update pipeline idle and pipeline pause tracking states based on other + inputs. This must be called whenever the other relevant inputs have + changed. */ +static int state_update_pipeline_state(struct pvr2_hdw *hdw) +{ + unsigned int st; + int updatedFl = 0; + /* Update pipeline state */ + st = !(hdw->state_encoder_run || + hdw->state_decoder_run || + hdw->state_usbstream_run || + (!hdw->state_decoder_quiescent)); + if (!st != !hdw->state_pipeline_idle) { + hdw->state_pipeline_idle = st; + updatedFl = !0; + } + if (hdw->state_pipeline_idle && hdw->state_pipeline_pause) { + hdw->state_pipeline_pause = 0; + updatedFl = !0; + } + return updatedFl; +} + + +typedef int (*state_eval_func)(struct pvr2_hdw *); + +/* Set of functions to be run to evaluate various states in the driver. */ +const static state_eval_func eval_funcs[] = { + state_eval_pipeline_config, + state_eval_encoder_ok, + state_eval_encoder_config, + state_eval_decoder_run, + state_eval_encoder_run, + state_eval_usbstream_run, +}; + + +/* Process various states and return true if we did anything interesting. */ +static int pvr2_hdw_state_update(struct pvr2_hdw *hdw) +{ + unsigned int i; + int state_updated = 0; + int check_flag; + + if (!hdw->state_stale) return 0; + if ((hdw->fw1_state != FW1_STATE_OK) || + !hdw->flag_ok) { + hdw->state_stale = 0; + return !0; + } + /* This loop is the heart of the entire driver. It keeps trying to + evaluate various bits of driver state until nothing changes for + one full iteration. Each "bit of state" tracks some global + aspect of the driver, e.g. whether decoder should run, if + pipeline is configured, usb streaming is on, etc. We separately + evaluate each of those questions based on other driver state to + arrive at the correct running configuration. */ + do { + check_flag = 0; + state_update_pipeline_state(hdw); + /* Iterate over each bit of state */ + for (i = 0; (iflag_ok; i++) { + if ((*eval_funcs[i])(hdw)) { + check_flag = !0; + state_updated = !0; + state_update_pipeline_state(hdw); + } + } + } while (check_flag && hdw->flag_ok); + hdw->state_stale = 0; + trace_stbit("state_stale",hdw->state_stale); + return state_updated; +} + + +static unsigned int pvr2_hdw_report_unlocked(struct pvr2_hdw *hdw,int which, + char *buf,unsigned int acnt) +{ + switch (which) { + case 0: + return scnprintf( + buf,acnt, + "driver:%s%s%s%s%s", + (hdw->flag_ok ? " " : " "), + (hdw->flag_init_ok ? " " : " "), + (hdw->flag_disconnected ? " " : + " "), + (hdw->flag_tripped ? " " : ""), + (hdw->flag_decoder_missed ? " " : "")); + case 1: + return scnprintf( + buf,acnt, + "pipeline:%s%s%s%s", + (hdw->state_pipeline_idle ? " " : ""), + (hdw->state_pipeline_config ? + " " : " "), + (hdw->state_pipeline_req ? " " : ""), + (hdw->state_pipeline_pause ? " " : "")); + case 2: + return scnprintf( + buf,acnt, + "worker:%s%s%s%s%s%s", + (hdw->state_decoder_run ? + " " : + (hdw->state_decoder_quiescent ? + "" : " ")), + (hdw->state_decoder_quiescent ? + " " : ""), + (hdw->state_encoder_ok ? + "" : " "), + (hdw->state_encoder_run ? + " " : " "), + (hdw->state_encoder_config ? + " " : + (hdw->state_encoder_waitok ? + "" : " ")), + (hdw->state_usbstream_run ? + " " : " ")); + break; + case 3: + return scnprintf( + buf,acnt, + "state: %s", + pvr2_get_state_name(hdw->master_state)); + break; + default: break; + } + return 0; +} + + +unsigned int pvr2_hdw_state_report(struct pvr2_hdw *hdw, + char *buf,unsigned int acnt) +{ + unsigned int bcnt,ccnt,idx; + bcnt = 0; + LOCK_TAKE(hdw->big_lock); + for (idx = 0; ; idx++) { + ccnt = pvr2_hdw_report_unlocked(hdw,idx,buf,acnt); + if (!ccnt) break; + bcnt += ccnt; acnt -= ccnt; buf += ccnt; + if (!acnt) break; + buf[0] = '\n'; ccnt = 1; + bcnt += ccnt; acnt -= ccnt; buf += ccnt; + } + LOCK_GIVE(hdw->big_lock); + return bcnt; +} + + +static void pvr2_hdw_state_log_state(struct pvr2_hdw *hdw) +{ + char buf[128]; + unsigned int idx,ccnt; + + for (idx = 0; ; idx++) { + ccnt = pvr2_hdw_report_unlocked(hdw,idx,buf,sizeof(buf)); + if (!ccnt) break; + printk(KERN_INFO "%s %.*s\n",hdw->name,ccnt,buf); + } +} + + +/* Evaluate and update the driver's current state, taking various actions + as appropriate for the update. */ +static int pvr2_hdw_state_eval(struct pvr2_hdw *hdw) +{ + unsigned int st; + int state_updated = 0; + int callback_flag = 0; + + pvr2_trace(PVR2_TRACE_STBITS, + "Drive state check START"); + if (pvrusb2_debug & PVR2_TRACE_STBITS) { + pvr2_hdw_state_log_state(hdw); + } + + /* Process all state and get back over disposition */ + state_updated = pvr2_hdw_state_update(hdw); + + /* Update master state based upon all other states. */ + if (!hdw->flag_ok) { + st = PVR2_STATE_DEAD; + } else if (hdw->fw1_state != FW1_STATE_OK) { + st = PVR2_STATE_COLD; + } else if (!hdw->state_encoder_ok) { + st = PVR2_STATE_WARM; + } else if (hdw->flag_tripped || hdw->flag_decoder_missed) { + st = PVR2_STATE_ERROR; + } else if (hdw->state_encoder_run && + hdw->state_decoder_run && + hdw->state_usbstream_run) { + st = PVR2_STATE_RUN; + } else { + st = PVR2_STATE_READY; + } + if (hdw->master_state != st) { + pvr2_trace(PVR2_TRACE_STATE, + "Device state change from %s to %s", + pvr2_get_state_name(hdw->master_state), + pvr2_get_state_name(st)); + hdw->master_state = st; + state_updated = !0; + callback_flag = !0; + } + if (state_updated) { + /* Trigger anyone waiting on any state changes here. */ + wake_up(&hdw->state_wait_data); + } + + if (pvrusb2_debug & PVR2_TRACE_STBITS) { + pvr2_hdw_state_log_state(hdw); + } + pvr2_trace(PVR2_TRACE_STBITS, + "Drive state check DONE callback=%d",callback_flag); + + return callback_flag; +} + + +/* Cause kernel thread to check / update driver state */ +static void pvr2_hdw_state_sched(struct pvr2_hdw *hdw) +{ + if (hdw->state_stale) return; + hdw->state_stale = !0; + trace_stbit("state_stale",hdw->state_stale); + queue_work(hdw->workqueue,&hdw->workpoll); +} + + +void pvr2_hdw_get_debug_info_unlocked(const struct pvr2_hdw *hdw, + struct pvr2_hdw_debug_info *ptr) { ptr->big_lock_held = hdw->big_lock_held; ptr->ctl_lock_held = hdw->ctl_lock_held; - ptr->flag_ok = hdw->flag_ok; ptr->flag_disconnected = hdw->flag_disconnected; ptr->flag_init_ok = hdw->flag_init_ok; - ptr->flag_streaming_enabled = hdw->flag_streaming_enabled; - ptr->subsys_flags = hdw->subsys_enabled_mask; + ptr->flag_ok = hdw->flag_ok; + ptr->fw1_state = hdw->fw1_state; + ptr->flag_decoder_missed = hdw->flag_decoder_missed; + ptr->flag_tripped = hdw->flag_tripped; + ptr->state_encoder_ok = hdw->state_encoder_ok; + ptr->state_encoder_run = hdw->state_encoder_run; + ptr->state_decoder_run = hdw->state_decoder_run; + ptr->state_usbstream_run = hdw->state_usbstream_run; + ptr->state_decoder_quiescent = hdw->state_decoder_quiescent; + ptr->state_pipeline_config = hdw->state_pipeline_config; + ptr->state_pipeline_req = hdw->state_pipeline_req; + ptr->state_pipeline_pause = hdw->state_pipeline_pause; + ptr->state_pipeline_idle = hdw->state_pipeline_idle; ptr->cmd_debug_state = hdw->cmd_debug_state; ptr->cmd_code = hdw->cmd_debug_code; ptr->cmd_debug_write_len = hdw->cmd_debug_write_len; @@ -3381,6 +3723,15 @@ void pvr2_hdw_get_debug_info(const struct pvr2_hdw *hdw, } +void pvr2_hdw_get_debug_info_locked(struct pvr2_hdw *hdw, + struct pvr2_hdw_debug_info *ptr) +{ + LOCK_TAKE(hdw->ctl_lock); do { + pvr2_hdw_get_debug_info_unlocked(hdw,ptr); + } while(0); LOCK_GIVE(hdw->ctl_lock); +} + + int pvr2_hdw_gpio_get_dir(struct pvr2_hdw *hdw,u32 *dp) { return pvr2_read_register(hdw,PVR2_GPIO_DIR,dp); diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.h b/drivers/media/video/pvrusb2/pvrusb2-hdw.h index e2f9d5e4cb65..383685f7c81f 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.h +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.h @@ -44,27 +44,6 @@ #define PVR2_CVAL_INPUT_COMPOSITE 2 #define PVR2_CVAL_INPUT_RADIO 3 -/* Subsystem definitions - these are various pieces that can be - independently stopped / started. Usually you don't want to mess with - this directly (let the driver handle things itself), but it is useful - for debugging. */ -#define PVR2_SUBSYS_B_ENC_FIRMWARE 0 -#define PVR2_SUBSYS_B_ENC_CFG 1 -#define PVR2_SUBSYS_B_DIGITIZER_RUN 2 -#define PVR2_SUBSYS_B_USBSTREAM_RUN 3 -#define PVR2_SUBSYS_B_ENC_RUN 4 - -#define PVR2_SUBSYS_CFG_ALL ( \ - (1 << PVR2_SUBSYS_B_ENC_FIRMWARE) | \ - (1 << PVR2_SUBSYS_B_ENC_CFG) ) -#define PVR2_SUBSYS_RUN_ALL ( \ - (1 << PVR2_SUBSYS_B_DIGITIZER_RUN) | \ - (1 << PVR2_SUBSYS_B_USBSTREAM_RUN) | \ - (1 << PVR2_SUBSYS_B_ENC_RUN) ) -#define PVR2_SUBSYS_ALL ( \ - PVR2_SUBSYS_CFG_ALL | \ - PVR2_SUBSYS_RUN_ALL ) - enum pvr2_config { pvr2_config_empty, /* No configuration */ pvr2_config_mpeg, /* Encoded / compressed video */ @@ -79,8 +58,41 @@ enum pvr2_v4l_type { pvr2_v4l_type_radio, }; +/* Major states that we can be in: + * + * DEAD - Device is in an unusable state and cannot be recovered. This + * can happen if we completely lose the ability to communicate with it + * (but it might still on the bus). In this state there's nothing we can + * do; it must be replugged in order to recover. + * + * COLD - Device is in an unusuable state, needs microcontroller firmware. + * + * WARM - We can communicate with the device and the proper + * microcontroller firmware is running, but other device initialization is + * still needed (e.g. encoder firmware). + * + * ERROR - A problem prevents capture operation (e.g. encoder firmware + * missing). + * + * READY - Device is operational, but not streaming. + * + * RUN - Device is streaming. + * + */ +#define PVR2_STATE_NONE 0 +#define PVR2_STATE_DEAD 1 +#define PVR2_STATE_COLD 2 +#define PVR2_STATE_WARM 3 +#define PVR2_STATE_ERROR 4 +#define PVR2_STATE_READY 5 +#define PVR2_STATE_RUN 6 + +/* Translate configuration enum to a string label */ const char *pvr2_config_get_name(enum pvr2_config); +/* Translate a master state enum to a string label */ +const char *pvr2_hdw_get_state_name(unsigned int); + struct pvr2_hdw; /* Create and return a structure for interacting with the underlying @@ -88,28 +100,13 @@ struct pvr2_hdw; struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, const struct usb_device_id *devid); -/* Poll for background activity (if any) */ -void pvr2_hdw_poll(struct pvr2_hdw *); - -/* Trigger a poll to take place later at a convenient time */ -void pvr2_hdw_poll_trigger_unlocked(struct pvr2_hdw *); - -/* Register a callback used to trigger a future poll */ -void pvr2_hdw_setup_poll_trigger(struct pvr2_hdw *, - void (*func)(void *), - void *data); - /* Destroy hardware interaction structure */ void pvr2_hdw_destroy(struct pvr2_hdw *); -/* Set up the structure and attempt to put the device into a usable state. - This can be a time-consuming operation, which is why it is not done - internally as part of the create() step. Return value is exactly the - same as pvr2_hdw_init_ok(). */ -int pvr2_hdw_setup(struct pvr2_hdw *); - -/* Initialization succeeded */ -int pvr2_hdw_init_ok(struct pvr2_hdw *); +/* Register a function to be called whenever the master state changes. */ +void pvr2_hdw_set_state_callback(struct pvr2_hdw *, + void (*callback_func)(void *), + void *callback_data); /* Return true if in the ready (normal) state */ int pvr2_hdw_dev_ok(struct pvr2_hdw *); @@ -167,6 +164,9 @@ int pvr2_hdw_set_streaming(struct pvr2_hdw *,int); /* Find out if streaming is on */ int pvr2_hdw_get_streaming(struct pvr2_hdw *); +/* Retrieve driver overall state */ +int pvr2_hdw_get_state(struct pvr2_hdw *); + /* Configure the type of stream to generate */ int pvr2_hdw_set_stream_type(struct pvr2_hdw *, enum pvr2_config); @@ -177,26 +177,6 @@ struct pvr2_stream *pvr2_hdw_get_video_stream(struct pvr2_hdw *); int pvr2_hdw_get_stdenum_value(struct pvr2_hdw *hdw,struct v4l2_standard *std, unsigned int idx); -/* Enable / disable various pieces of hardware. Items to change are - identified by bit positions within msk, and new state for each item is - identified by corresponding bit positions within val. */ -void pvr2_hdw_subsys_bit_chg(struct pvr2_hdw *hdw, - unsigned long msk,unsigned long val); - -/* Retrieve mask indicating which pieces of hardware are currently enabled - / configured. */ -unsigned long pvr2_hdw_subsys_get(struct pvr2_hdw *); - -/* Adjust mask of what get shut down when streaming is stopped. This is a - debugging aid. */ -void pvr2_hdw_subsys_stream_bit_chg(struct pvr2_hdw *hdw, - unsigned long msk,unsigned long val); - -/* Retrieve mask indicating which pieces of hardware are disabled when - streaming is turned off. */ -unsigned long pvr2_hdw_subsys_stream_get(struct pvr2_hdw *); - - /* Enable / disable retrieval of CPU firmware or prom contents. This must be enabled before pvr2_hdw_cpufw_get() will function. Note that doing this may prevent the device from running (and leaving this mode may @@ -253,6 +233,9 @@ void pvr2_hdw_cpureset_assert(struct pvr2_hdw *,int); /* Execute a USB-commanded device reset */ void pvr2_hdw_device_reset(struct pvr2_hdw *); +/* Reset worker's error trapping circuit breaker */ +int pvr2_hdw_untrip(struct pvr2_hdw *); + /* Execute hard reset command (after this point it's likely that the encoder will have to be reconfigured). This also clears the "useless" state. */ @@ -275,11 +258,21 @@ int pvr2_hdw_gpio_chg_out(struct pvr2_hdw *hdw,u32 msk,u32 val); struct pvr2_hdw_debug_info { int big_lock_held; int ctl_lock_held; - int flag_ok; int flag_disconnected; int flag_init_ok; - int flag_streaming_enabled; - unsigned long subsys_flags; + int flag_ok; + int fw1_state; + int flag_decoder_missed; + int flag_tripped; + int state_encoder_ok; + int state_encoder_run; + int state_decoder_run; + int state_usbstream_run; + int state_decoder_quiescent; + int state_pipeline_config; + int state_pipeline_req; + int state_pipeline_pause; + int state_pipeline_idle; int cmd_debug_state; int cmd_debug_write_len; int cmd_debug_read_len; @@ -295,8 +288,20 @@ struct pvr2_hdw_debug_info { diagnosing lockups. Note that this operation is completed without any kind of locking and so it is not atomic and may yield inconsistent results. This is *purely* a debugging aid. */ -void pvr2_hdw_get_debug_info(const struct pvr2_hdw *hdw, - struct pvr2_hdw_debug_info *); +void pvr2_hdw_get_debug_info_unlocked(const struct pvr2_hdw *hdw, + struct pvr2_hdw_debug_info *); + +/* Intrusively retrieve internal state info - this is useful for + diagnosing overall driver state. This operation synchronizes against + the overall driver mutex - so if there are locking problems this will + likely hang! This is *purely* a debugging aid. */ +void pvr2_hdw_get_debug_info_locked(struct pvr2_hdw *hdw, + struct pvr2_hdw_debug_info *); + +/* Report out several lines of text that describes driver internal state. + Results are written into the passed-in buffer. */ +unsigned int pvr2_hdw_state_report(struct pvr2_hdw *hdw, + char *buf_ptr,unsigned int buf_size); /* Cause modules to log their state once */ void pvr2_hdw_trigger_module_log(struct pvr2_hdw *hdw); diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c index c817c864e6a0..f8b7bd1e0d89 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c +++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c @@ -895,7 +895,7 @@ static int pvr2_i2c_attach_inform(struct i2c_client *client) list_add_tail(&cp->list,&hdw->i2c_clients); hdw->i2c_pend_types |= PVR2_I2C_PEND_DETECT; } while (0); mutex_unlock(&hdw->i2c_list_lock); - if (fl) pvr2_hdw_poll_trigger_unlocked(hdw); + if (fl) queue_work(hdw->workqueue,&hdw->worki2csync); return 0; } diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c index 7a596ea7cfe6..6f06f595b86c 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c +++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c @@ -1015,10 +1015,8 @@ static int pvr2_v4l2_iosetup(struct pvr2_v4l2_fh *fh) sp = fh->dev_info->stream->stream; pvr2_stream_set_callback(sp,(pvr2_stream_callback)pvr2_v4l2_notify,fh); pvr2_hdw_set_stream_type(hdw,fh->dev_info->config); - pvr2_hdw_set_streaming(hdw,!0); - ret = pvr2_ioread_set_enabled(fh->rhp,!0); - - return ret; + if ((ret = pvr2_hdw_set_streaming(hdw,!0)) < 0) return ret; + return pvr2_ioread_set_enabled(fh->rhp,!0); } diff --git a/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c b/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c index 61efa6f02200..767e49022f9b 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c +++ b/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c @@ -129,7 +129,7 @@ static const struct pvr2_v4l_decoder_ops decoder_ops[] = { static void decoder_detach(struct pvr2_v4l_decoder *ctxt) { ctxt->client->handler = NULL; - ctxt->hdw->decoder_ctrl = NULL; + pvr2_hdw_set_decoder(ctxt->hdw,NULL); kfree(ctxt); } @@ -217,7 +217,7 @@ int pvr2_i2c_decoder_v4l_setup(struct pvr2_hdw *hdw, ctxt->client = cp; ctxt->hdw = hdw; ctxt->stale_mask = (1 << ARRAY_SIZE(decoder_ops)) - 1; - hdw->decoder_ctrl = &ctxt->ctrl; + pvr2_hdw_set_decoder(hdw,&ctxt->ctrl); cp->handler = &ctxt->handler; pvr2_trace(PVR2_TRACE_CHIPS,"i2c 0x%x saa711x V4L2 handler set up", cp->client->addr); -- cgit v1.2.3-59-g8ed1b From 989eb154eafad00c3b5039a3eca03e108dac1df8 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Mon, 26 Nov 2007 01:53:12 -0300 Subject: V4L/DVB (6692): pvrusb2: Centralize device specific attributes into a single place The pvrusb2 driver currently supports two variants of the Hauppauge PVR USB2. However there are other hardware types potentially supportable, but the driver at the moment is not structured to make it easy to describe these minor variations. This changeset is the first set of changes to make such additional device support possible. Device attributes are held in several tables all contained within pvrusb2-devattr.c; all other device-specific driver behavior now derives from these tables. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-devattr.c | 101 +++++++++++++++++++++ drivers/media/video/pvrusb2/pvrusb2-devattr.h | 87 ++++++++++++++++++ drivers/media/video/pvrusb2/pvrusb2-encoder.c | 16 ++-- drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h | 6 +- drivers/media/video/pvrusb2/pvrusb2-hdw.c | 91 +++---------------- drivers/media/video/pvrusb2/pvrusb2-hdw.h | 3 - drivers/media/video/pvrusb2/pvrusb2-i2c-core.c | 8 +- drivers/media/video/pvrusb2/pvrusb2-main.c | 1 + 8 files changed, 219 insertions(+), 94 deletions(-) create mode 100644 drivers/media/video/pvrusb2/pvrusb2-devattr.c create mode 100644 drivers/media/video/pvrusb2/pvrusb2-devattr.h diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c new file mode 100644 index 000000000000..aebcb846de6a --- /dev/null +++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c @@ -0,0 +1,101 @@ +/* + * + * $Id$ + * + * Copyright (C) 2007 Mike Isely + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +/* + +This source file should encompass ALL per-device type information for the +driver. To define a new device, add elements to the pvr2_device_table and +pvr2_device_desc structures. + +*/ + +#include "pvrusb2-devattr.h" +#include + +/* Known major hardware variants, keyed from device ID */ +#define PVR2_HDW_TYPE_29XXX 0 +#define PVR2_HDW_TYPE_24XXX 1 + +struct usb_device_id pvr2_device_table[] = { + [PVR2_HDW_TYPE_29XXX] = { USB_DEVICE(0x2040, 0x2900) }, + [PVR2_HDW_TYPE_24XXX] = { USB_DEVICE(0x2040, 0x2400) }, + { } +}; + +/* Names of other client modules to request for 24xxx model hardware */ +static const char *pvr2_client_24xxx[] = { + "cx25840", + "tuner", + "wm8775", +}; + +/* Names of other client modules to request for 29xxx model hardware */ +static const char *pvr2_client_29xxx[] = { + "msp3400", + "saa7115", + "tuner", +}; + +/* Firmware file name(s) for 29xxx devices */ +static const char *pvr2_fw1_names_29xxx[] = { + "v4l-pvrusb2-29xxx-01.fw", +}; + +/* Firmware file name(s) for 29xxx devices */ +static const char *pvr2_fw1_names_24xxx[] = { + "v4l-pvrusb2-24xxx-01.fw", +}; + +const struct pvr2_device_desc pvr2_device_descriptions[] = { + [PVR2_HDW_TYPE_29XXX] = { + .description = "WinTV PVR USB2 Model Category 29xxxx", + .shortname = "29xxx", + .client_modules.lst = pvr2_client_29xxx, + .client_modules.cnt = ARRAY_SIZE(pvr2_client_29xxx), + .fx2_firmware.lst = pvr2_fw1_names_29xxx, + .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_29xxx), + }, + [PVR2_HDW_TYPE_24XXX] = { + .description = "WinTV PVR USB2 Model Category 24xxxx", + .shortname = "24xxx", + .client_modules.lst = pvr2_client_24xxx, + .client_modules.cnt = ARRAY_SIZE(pvr2_client_24xxx), + .fx2_firmware.lst = pvr2_fw1_names_24xxx, + .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_24xxx), + .flag_has_cx25840 = !0, + .flag_has_wm8775 = !0, + }, +}; + +const unsigned int pvr2_device_count = ARRAY_SIZE(pvr2_device_descriptions); + +MODULE_DEVICE_TABLE(usb, pvr2_device_table); + + +/* + Stuff for Emacs to see, in order to encourage consistent editing style: + *** Local Variables: *** + *** mode: c *** + *** fill-column: 75 *** + *** tab-width: 8 *** + *** c-basic-offset: 8 *** + *** End: *** + */ diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.h b/drivers/media/video/pvrusb2/pvrusb2-devattr.h new file mode 100644 index 000000000000..6576aefd27c3 --- /dev/null +++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.h @@ -0,0 +1,87 @@ +/* + * + * $Id$ + * + * Copyright (C) 2005 Mike Isely + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef __PVRUSB2_DEVATTR_H +#define __PVRUSB2_DEVATTR_H + +#include + +/* + + This header defines structures used to describe attributes of a device. + +*/ + + +struct pvr2_string_table { + const char **lst; + unsigned int cnt; +}; + + +/* This describes a particular hardware type (except for the USB device ID + which must live in a separate structure due to environmental + constraints). See the top of pvrusb2-hdw.c for where this is + instantiated. */ +struct pvr2_device_desc { + /* Single line text description of hardware */ + const char *description; + + /* Single token identifier for hardware */ + const char *shortname; + + /* List of additional client modules we need to load */ + struct pvr2_string_table client_modules; + + /* List of FX2 firmware file names we should search; if empty then + FX2 firmware check / load is skipped and we assume the device + was initialized from internal ROM. */ + struct pvr2_string_table fx2_firmware; + + /* If set, we don't bother trying to load cx23416 firmware. */ + char flag_skip_cx23416_firmware; + + /* Device does not require a powerup command to be issued. */ + char flag_no_powerup; + + /* Device has a cx25840 - this enables special additional logic to + handle it. */ + char flag_has_cx25840; + + /* Device has a wm8775 - this enables special additional logic to + ensure that it is found. */ + char flag_has_wm8775; +}; + +extern const struct pvr2_device_desc pvr2_device_descriptions[]; +extern struct usb_device_id pvr2_device_table[]; +extern const unsigned int pvr2_device_count; + +#endif /* __PVRUSB2_HDW_INTERNAL_H */ + +/* + Stuff for Emacs to see, in order to encourage consistent editing style: + *** Local Variables: *** + *** mode: c *** + *** fill-column: 75 *** + *** tab-width: 8 *** + *** c-basic-offset: 8 *** + *** End: *** + */ diff --git a/drivers/media/video/pvrusb2/pvrusb2-encoder.c b/drivers/media/video/pvrusb2/pvrusb2-encoder.c index 5ca548cc7e7f..4271b4132664 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-encoder.c +++ b/drivers/media/video/pvrusb2/pvrusb2-encoder.c @@ -370,13 +370,13 @@ static int pvr2_encoder_prep_config(struct pvr2_hdw *hdw) /* This ENC_MISC(3,encMisc3Arg) command is critical - without it there will eventually be video corruption. Also, the - 29xxx case is strange - the Windows driver is passing 1 - regardless of device type but if we have 1 for 29xxx device - the video turns sluggish. */ - switch (hdw->hdw_type) { - case PVR2_HDW_TYPE_24XXX: encMisc3Arg = 1; break; - case PVR2_HDW_TYPE_29XXX: encMisc3Arg = 0; break; - default: break; + saa7115 case is strange - the Windows driver is passing 1 + regardless of device type but if we have 1 for saa7115 + devices the video turns sluggish. */ + if (hdw->hdw_desc->flag_has_cx25840) { + encMisc3Arg = 1; + } else { + encMisc3Arg = 0; } ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC,4, 3, encMisc3Arg,0,0); @@ -434,7 +434,7 @@ int pvr2_encoder_configure(struct pvr2_hdw *hdw) /* saa7115: 0xf0 */ val = 0xf0; - if (hdw->hdw_type == PVR2_HDW_TYPE_24XXX) { + if (hdw->hdw_desc->flag_has_cx25840) { /* ivtv cx25840: 0x140 */ val = 0x140; } diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h index 8ee4549b7a9f..8c2d222960f1 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h @@ -40,6 +40,7 @@ #include "pvrusb2-hdw.h" #include "pvrusb2-io.h" #include +#include "pvrusb2-devattr.h" /* Legal values for PVR2_CID_HSM */ #define PVR2_CVAL_HSM_FAIL 0 @@ -162,10 +163,6 @@ struct pvr2_decoder_ctrl { #define FW1_STATE_RELOAD 3 #define FW1_STATE_OK 4 -/* Known major hardware variants, keyed from device ID */ -#define PVR2_HDW_TYPE_29XXX 0 -#define PVR2_HDW_TYPE_24XXX 1 - typedef int (*pvr2_i2c_func)(struct pvr2_hdw *,u8,u8 *,u16,u8 *, u16); #define PVR2_I2C_FUNC_CNT 128 @@ -179,6 +176,7 @@ struct pvr2_hdw { /* Device type, one of PVR2_HDW_TYPE_xxxxx */ unsigned int hdw_type; + const struct pvr2_device_desc *hdw_desc; /* Kernel worker thread handling */ struct workqueue_struct *workqueue; diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index 4e55a2a84073..c56208456bc0 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -41,47 +41,6 @@ #define TV_MIN_FREQ 55250000L #define TV_MAX_FREQ 850000000L -struct usb_device_id pvr2_device_table[] = { - [PVR2_HDW_TYPE_29XXX] = { USB_DEVICE(0x2040, 0x2900) }, - [PVR2_HDW_TYPE_24XXX] = { USB_DEVICE(0x2040, 0x2400) }, - { } -}; - -MODULE_DEVICE_TABLE(usb, pvr2_device_table); - -static const char *pvr2_device_names[] = { - [PVR2_HDW_TYPE_29XXX] = "WinTV PVR USB2 Model Category 29xxxx", - [PVR2_HDW_TYPE_24XXX] = "WinTV PVR USB2 Model Category 24xxxx", -}; - -struct pvr2_string_table { - const char **lst; - unsigned int cnt; -}; - -// Names of other client modules to request for 24xxx model hardware -static const char *pvr2_client_24xxx[] = { - "cx25840", - "tuner", - "wm8775", -}; - -// Names of other client modules to request for 29xxx model hardware -static const char *pvr2_client_29xxx[] = { - "msp3400", - "saa7115", - "tuner", -}; - -static struct pvr2_string_table pvr2_client_lists[] = { - [PVR2_HDW_TYPE_29XXX] = { - pvr2_client_29xxx, ARRAY_SIZE(pvr2_client_29xxx) - }, - [PVR2_HDW_TYPE_24XXX] = { - pvr2_client_24xxx, ARRAY_SIZE(pvr2_client_24xxx) - }, -}; - static struct pvr2_hdw *unit_pointers[PVR_NUM] = {[ 0 ... PVR_NUM-1 ] = NULL}; static DEFINE_MUTEX(pvr2_unit_mtx); @@ -394,8 +353,8 @@ static int ctrl_vres_max_get(struct pvr2_ctrl *cptr,int *vp) static int ctrl_vres_min_get(struct pvr2_ctrl *cptr,int *vp) { - /* Actual minimum depends on device type. */ - if (cptr->hdw->hdw_type == PVR2_HDW_TYPE_24XXX) { + /* Actual minimum depends on device digitizer type. */ + if (cptr->hdw->hdw_desc->flag_has_cx25840) { *vp = 75; } else { *vp = 17; @@ -1131,23 +1090,8 @@ static int pvr2_upload_firmware1(struct pvr2_hdw *hdw) unsigned int pipe; int ret; u16 address; - static const char *fw_files_29xxx[] = { - "v4l-pvrusb2-29xxx-01.fw", - }; - static const char *fw_files_24xxx[] = { - "v4l-pvrusb2-24xxx-01.fw", - }; - static const struct pvr2_string_table fw_file_defs[] = { - [PVR2_HDW_TYPE_29XXX] = { - fw_files_29xxx, ARRAY_SIZE(fw_files_29xxx) - }, - [PVR2_HDW_TYPE_24XXX] = { - fw_files_24xxx, ARRAY_SIZE(fw_files_24xxx) - }, - }; - if ((hdw->hdw_type >= ARRAY_SIZE(fw_file_defs)) || - (!fw_file_defs[hdw->hdw_type].lst)) { + if (!hdw->hdw_desc->fx2_firmware.cnt) { hdw->fw1_state = FW1_STATE_OK; return 0; } @@ -1157,8 +1101,8 @@ static int pvr2_upload_firmware1(struct pvr2_hdw *hdw) trace_firmware("pvr2_upload_firmware1"); ret = pvr2_locate_firmware(hdw,&fw_entry,"fx2 controller", - fw_file_defs[hdw->hdw_type].cnt, - fw_file_defs[hdw->hdw_type].lst); + hdw->hdw_desc->fx2_firmware.cnt, + hdw->hdw_desc->fx2_firmware.lst); if (ret < 0) { if (ret == -ENOENT) hdw->fw1_state = FW1_STATE_MISSING; return ret; @@ -1233,8 +1177,7 @@ int pvr2_upload_firmware2(struct pvr2_hdw *hdw) CX2341X_FIRM_ENC_FILENAME, }; - if ((hdw->hdw_type != PVR2_HDW_TYPE_29XXX) && - (hdw->hdw_type != PVR2_HDW_TYPE_24XXX)) { + if (hdw->hdw_desc->flag_skip_cx23416_firmware) { return 0; } @@ -1652,8 +1595,7 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw) unsigned int idx; struct pvr2_ctrl *cptr; int reloadFl = 0; - if ((hdw->hdw_type == PVR2_HDW_TYPE_29XXX) || - (hdw->hdw_type == PVR2_HDW_TYPE_24XXX)) { + if (hdw->hdw_desc->fx2_firmware.cnt) { if (!reloadFl) { reloadFl = (hdw->usb_intf->cur_altsetting->desc.bNumEndpoints @@ -1689,17 +1631,11 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw) } if (!pvr2_hdw_dev_ok(hdw)) return; - if (hdw->hdw_type < ARRAY_SIZE(pvr2_client_lists)) { - for (idx = 0; - idx < pvr2_client_lists[hdw->hdw_type].cnt; - idx++) { - request_module( - pvr2_client_lists[hdw->hdw_type].lst[idx]); - } + for (idx = 0; idx < hdw->hdw_desc->client_modules.cnt; idx++) { + request_module(hdw->hdw_desc->client_modules.lst[idx]); } - if ((hdw->hdw_type == PVR2_HDW_TYPE_29XXX) || - (hdw->hdw_type == PVR2_HDW_TYPE_24XXX)) { + if (!hdw->hdw_desc->flag_no_powerup) { pvr2_hdw_cmd_powerup(hdw); if (!pvr2_hdw_dev_ok(hdw)) return; } @@ -1857,20 +1793,22 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, unsigned int hdw_type; int valid_std_mask; struct pvr2_ctrl *cptr; + const struct pvr2_device_desc *hdw_desc; __u8 ifnum; struct v4l2_queryctrl qctrl; struct pvr2_ctl_info *ciptr; hdw_type = devid - pvr2_device_table; - if (hdw_type >= ARRAY_SIZE(pvr2_device_names)) { + if (hdw_type >= pvr2_device_count) { pvr2_trace(PVR2_TRACE_ERROR_LEGS, "Bogus device type of %u reported",hdw_type); return NULL; } + hdw_desc = pvr2_device_descriptions + hdw_type; hdw = kzalloc(sizeof(*hdw),GFP_KERNEL); pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_create: hdw=%p, type \"%s\"", - hdw,pvr2_device_names[hdw_type]); + hdw,hdw_desc->description); if (!hdw) goto fail; init_timer(&hdw->quiescent_timer); @@ -1894,6 +1832,7 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, GFP_KERNEL); if (!hdw->controls) goto fail; hdw->hdw_type = hdw_type; + hdw->hdw_desc = hdw_desc; for (idx = 0; idx < hdw->control_cnt; idx++) { cptr = hdw->controls + idx; cptr->hdw = hdw; diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.h b/drivers/media/video/pvrusb2/pvrusb2-hdw.h index 383685f7c81f..205fa03057e6 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.h +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.h @@ -311,9 +311,6 @@ void pvr2_hdw_trigger_module_log(struct pvr2_hdw *hdw); a debugging aid. */ int pvr2_upload_firmware2(struct pvr2_hdw *hdw); -/* List of device types that we can match */ -extern struct usb_device_id pvr2_device_table[]; - #endif /* __PVRUSB2_HDW_H */ /* diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c index f8b7bd1e0d89..7721ec85d572 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c +++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c @@ -980,14 +980,16 @@ void pvr2_i2c_core_init(struct pvr2_hdw *hdw) printk(KERN_INFO "%s: IR disabled\n",hdw->name); hdw->i2c_func[0x18] = i2c_black_hole; } else if (ir_mode[hdw->unit_number] == 1) { - if (hdw->hdw_type == PVR2_HDW_TYPE_24XXX) { + if (hdw->hdw_desc->flag_has_cx25840) { hdw->i2c_func[0x18] = i2c_24xxx_ir; } } - if (hdw->hdw_type == PVR2_HDW_TYPE_24XXX) { - hdw->i2c_func[0x1b] = i2c_hack_wm8775; + if (hdw->hdw_desc->flag_has_cx25840) { hdw->i2c_func[0x44] = i2c_hack_cx25840; } + if (hdw->hdw_desc->flag_has_wm8775) { + hdw->i2c_func[0x1b] = i2c_hack_wm8775; + } // Configure the adapter and set up everything else related to it. memcpy(&hdw->i2c_adap,&pvr2_i2c_adap_template,sizeof(hdw->i2c_adap)); diff --git a/drivers/media/video/pvrusb2/pvrusb2-main.c b/drivers/media/video/pvrusb2/pvrusb2-main.c index 11b3b2e84b90..a8370737b503 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-main.c +++ b/drivers/media/video/pvrusb2/pvrusb2-main.c @@ -28,6 +28,7 @@ #include #include "pvrusb2-hdw.h" +#include "pvrusb2-devattr.h" #include "pvrusb2-context.h" #include "pvrusb2-debug.h" #include "pvrusb2-v4l2.h" -- cgit v1.2.3-59-g8ed1b From f8bcec6d1814862e299e2a32ff9dbb0be0ff6ceb Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Mon, 26 Nov 2007 02:30:20 -0300 Subject: V4L/DVB (6693): pvrusb2: Add pvrusb2-devattr.o to driver build Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/pvrusb2/Makefile b/drivers/media/video/pvrusb2/Makefile index 69b3e43cd0eb..47284e558648 100644 --- a/drivers/media/video/pvrusb2/Makefile +++ b/drivers/media/video/pvrusb2/Makefile @@ -6,7 +6,7 @@ pvrusb2-objs := pvrusb2-i2c-core.o pvrusb2-i2c-cmd-v4l2.o \ pvrusb2-encoder.o pvrusb2-video-v4l.o \ pvrusb2-eeprom.o pvrusb2-tuner.o \ pvrusb2-main.o pvrusb2-hdw.o pvrusb2-v4l2.o \ - pvrusb2-ctrl.o pvrusb2-std.o \ + pvrusb2-ctrl.o pvrusb2-std.o pvrusb2-devattr.o \ pvrusb2-context.o pvrusb2-io.o pvrusb2-ioread.o \ pvrusb2-cx2584x-v4l.o pvrusb2-wm8775.o \ $(obj-pvrusb2-sysfs-y) $(obj-pvrusb2-debugifc-y) -- cgit v1.2.3-59-g8ed1b From f66fbd71f24f5f0264bb8526cfb91ea5c6219f50 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Mon, 26 Nov 2007 01:55:07 -0300 Subject: V4L/DVB (6694): pvrusb2: Remove obsolete global hardware type enumeration Device-specific driver behavior is now defined by generic device characteristics rather than by specific device model information. With this change, the hardware type field can go away, thus this change. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h | 4 ++-- drivers/media/video/pvrusb2/pvrusb2-hdw.c | 1 - 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h index 8c2d222960f1..894c630c95c0 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h @@ -174,8 +174,8 @@ struct pvr2_hdw { struct usb_device *usb_dev; struct usb_interface *usb_intf; - /* Device type, one of PVR2_HDW_TYPE_xxxxx */ - unsigned int hdw_type; + /* Device description, anything that must adjust behavior based on + device specific info will use information held here. */ const struct pvr2_device_desc *hdw_desc; /* Kernel worker thread handling */ diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index c56208456bc0..c08162cc20ae 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -1831,7 +1831,6 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, hdw->controls = kzalloc(sizeof(struct pvr2_ctrl) * hdw->control_cnt, GFP_KERNEL); if (!hdw->controls) goto fail; - hdw->hdw_type = hdw_type; hdw->hdw_desc = hdw_desc; for (idx = 0; idx < hdw->control_cnt; idx++) { cptr = hdw->controls + idx; -- cgit v1.2.3-59-g8ed1b From 78a47101ac0ac75019a740d62c70ccb16ff7c7c1 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Mon, 26 Nov 2007 01:58:20 -0300 Subject: V4L/DVB (6695): pvrusb2: Implement functions to pass descriptive hardware info Implement additional pvrusb2 device info table entries for a device identifier and a device description. Export this information via the driver's internal API. Make this information available via the sysfs driver interface. Also propagate this information into the v4l2 capability structure. An app can now retrieve and report a descriptive string about the particular type of hardware device it is operating. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-hdw.c | 12 ++++++ drivers/media/video/pvrusb2/pvrusb2-hdw.h | 6 +++ drivers/media/video/pvrusb2/pvrusb2-sysfs.c | 60 +++++++++++++++++++++++++++++ drivers/media/video/pvrusb2/pvrusb2-v4l2.c | 1 + 4 files changed, 79 insertions(+) diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index c08162cc20ae..4ffaf3faff5b 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -2474,6 +2474,18 @@ const char *pvr2_hdw_get_driver_name(struct pvr2_hdw *hdw) } +const char *pvr2_hdw_get_desc(struct pvr2_hdw *hdw) +{ + return hdw->hdw_desc->description; +} + + +const char *pvr2_hdw_get_type(struct pvr2_hdw *hdw) +{ + return hdw->hdw_desc->shortname; +} + + int pvr2_hdw_is_hsm(struct pvr2_hdw *hdw) { int result; diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.h b/drivers/media/video/pvrusb2/pvrusb2-hdw.h index 205fa03057e6..3ad7a13d6c39 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.h +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.h @@ -158,6 +158,12 @@ int pvr2_hdw_get_tuner_status(struct pvr2_hdw *,struct v4l2_tuner *); /* Query device and see if it thinks it is on a high-speed USB link */ int pvr2_hdw_is_hsm(struct pvr2_hdw *); +/* Return a string token representative of the hardware type */ +const char *pvr2_hdw_get_type(struct pvr2_hdw *); + +/* Return a single line description of the hardware type */ +const char *pvr2_hdw_get_desc(struct pvr2_hdw *); + /* Turn streaming on/off */ int pvr2_hdw_set_streaming(struct pvr2_hdw *,int); diff --git a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c index 3c57a7d8200b..7a1cd878e31a 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c +++ b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c @@ -43,10 +43,14 @@ struct pvr2_sysfs { struct device_attribute attr_v4l_radio_minor_number; struct device_attribute attr_unit_number; struct device_attribute attr_bus_info; + struct device_attribute attr_hdw_name; + struct device_attribute attr_hdw_desc; int v4l_minor_number_created_ok; int v4l_radio_minor_number_created_ok; int unit_number_created_ok; int bus_info_created_ok; + int hdw_name_created_ok; + int hdw_desc_created_ok; }; #ifdef CONFIG_VIDEO_PVRUSB2_DEBUGIFC @@ -712,6 +716,14 @@ static void class_dev_destroy(struct pvr2_sysfs *sfp) pvr2_sysfs_tear_down_debugifc(sfp); #endif /* CONFIG_VIDEO_PVRUSB2_DEBUGIFC */ pvr2_sysfs_tear_down_controls(sfp); + if (sfp->hdw_desc_created_ok) { + device_remove_file(sfp->class_dev, + &sfp->attr_hdw_desc); + } + if (sfp->hdw_name_created_ok) { + device_remove_file(sfp->class_dev, + &sfp->attr_hdw_name); + } if (sfp->bus_info_created_ok) { device_remove_file(sfp->class_dev, &sfp->attr_bus_info); @@ -758,6 +770,28 @@ static ssize_t bus_info_show(struct device *class_dev, } +static ssize_t hdw_name_show(struct device *class_dev, + struct device_attribute *attr, char *buf) +{ + struct pvr2_sysfs *sfp; + sfp = (struct pvr2_sysfs *)class_dev->driver_data; + if (!sfp) return -EINVAL; + return scnprintf(buf,PAGE_SIZE,"%s\n", + pvr2_hdw_get_type(sfp->channel.hdw)); +} + + +static ssize_t hdw_desc_show(struct device *class_dev, + struct device_attribute *attr, char *buf) +{ + struct pvr2_sysfs *sfp; + sfp = (struct pvr2_sysfs *)class_dev->driver_data; + if (!sfp) return -EINVAL; + return scnprintf(buf,PAGE_SIZE,"%s\n", + pvr2_hdw_get_desc(sfp->channel.hdw)); +} + + static ssize_t v4l_radio_minor_number_show(struct device *class_dev, struct device_attribute *attr, char *buf) @@ -871,6 +905,32 @@ static void class_dev_create(struct pvr2_sysfs *sfp, sfp->bus_info_created_ok = !0; } + sfp->attr_hdw_name.attr.name = "device_hardware_type"; + sfp->attr_hdw_name.attr.mode = S_IRUGO; + sfp->attr_hdw_name.show = hdw_name_show; + sfp->attr_hdw_name.store = NULL; + ret = device_create_file(sfp->class_dev, + &sfp->attr_hdw_name); + if (ret < 0) { + printk(KERN_WARNING "%s: device_create_file error: %d\n", + __FUNCTION__, ret); + } else { + sfp->hdw_name_created_ok = !0; + } + + sfp->attr_hdw_desc.attr.name = "device_hardware_description"; + sfp->attr_hdw_desc.attr.mode = S_IRUGO; + sfp->attr_hdw_desc.show = hdw_desc_show; + sfp->attr_hdw_desc.store = NULL; + ret = device_create_file(sfp->class_dev, + &sfp->attr_hdw_desc); + if (ret < 0) { + printk(KERN_WARNING "%s: device_create_file error: %d\n", + __FUNCTION__, ret); + } else { + sfp->hdw_desc_created_ok = !0; + } + pvr2_sysfs_add_controls(sfp); #ifdef CONFIG_VIDEO_PVRUSB2_DEBUGIFC pvr2_sysfs_add_debugifc(sfp); diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c index 6f06f595b86c..8f0587ebd4bd 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c +++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c @@ -205,6 +205,7 @@ static int pvr2_v4l2_do_ioctl(struct inode *inode, struct file *file, memcpy(cap, &pvr_capability, sizeof(struct v4l2_capability)); strlcpy(cap->bus_info,pvr2_hdw_get_bus_info(hdw), sizeof(cap->bus_info)); + strlcpy(cap->card,pvr2_hdw_get_desc(hdw),sizeof(cap->card)); ret = 0; break; -- cgit v1.2.3-59-g8ed1b From 56dcbfa0d5a46f137df5047ae8f3aab30f59954e Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Mon, 26 Nov 2007 02:00:51 -0300 Subject: V4L/DVB (6696): pvrusb2: Miscellaneous tweaks for controlling tuner type and video standard Correctly mark when a tuner type is set. Report more faithfully information about known supported device video standards. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-eeprom.c | 1 + drivers/media/video/pvrusb2/pvrusb2-hdw.c | 10 +++++++--- 2 files changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/pvrusb2/pvrusb2-eeprom.c b/drivers/media/video/pvrusb2/pvrusb2-eeprom.c index 45cbca0143ca..5ef005947b04 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-eeprom.c +++ b/drivers/media/video/pvrusb2/pvrusb2-eeprom.c @@ -144,6 +144,7 @@ int pvr2_eeprom_analyze(struct pvr2_hdw *hdw) trace_eeprom("serial_number=%d",tvdata.serial_number); trace_eeprom("rev_str=%s",tvdata.rev_str); hdw->tuner_type = tvdata.tuner_type; + hdw->tuner_updated = !0; hdw->serial_number = tvdata.serial_number; hdw->std_mask_eeprom = tvdata.tuner_formats; diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index 4ffaf3faff5b..6a7b9af55e43 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -1093,7 +1093,10 @@ static int pvr2_upload_firmware1(struct pvr2_hdw *hdw) if (!hdw->hdw_desc->fx2_firmware.cnt) { hdw->fw1_state = FW1_STATE_OK; - return 0; + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "Connected device type defines" + " no firmware to upload; ignoring firmware"); + return -ENOTTY; } hdw->fw1_state = FW1_STATE_FAILED; // default result @@ -1524,7 +1527,8 @@ static void pvr2_hdw_setup_std(struct pvr2_hdw *hdw) bcnt = pvr2_std_id_to_str(buf,sizeof(buf),hdw->std_mask_eeprom); pvr2_trace(PVR2_TRACE_STD, - "Supported video standard(s) reported by eeprom: %.*s", + "Supported video standard(s) reported available" + " in hardware: %.*s", bcnt,buf); hdw->std_mask_avail = hdw->std_mask_eeprom; @@ -1682,9 +1686,9 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw) pvr2_trace(PVR2_TRACE_INIT, "pvr2_hdw_setup: Tuner type overridden to %d", hdw->tuner_type); + hdw->tuner_updated = !0; } - hdw->tuner_updated = !0; pvr2_i2c_core_check_stale(hdw); hdw->tuner_updated = 0; -- cgit v1.2.3-59-g8ed1b From aaf7884db395332ae8474f3ea5bcdd39c0a941ea Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Mon, 26 Nov 2007 02:04:11 -0300 Subject: V4L/DVB (6697): pvrusb2: Existence of Hauppauge ROM is a device-specific attribute Arrange so that the pvrusb2 driver can optionally work without a Hauppauge ROM being present - which is fairly important for devices that happen to not come from Hauppauge. The expected existence of a Hauppauge ROM is now a device attribute. The tuner type is now also a device attribute, which is consulted if there is no ROM. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-devattr.c | 2 ++ drivers/media/video/pvrusb2/pvrusb2-devattr.h | 7 +++++++ drivers/media/video/pvrusb2/pvrusb2-hdw.c | 25 ++++++++++++++++--------- 3 files changed, 25 insertions(+), 9 deletions(-) diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c index aebcb846de6a..54a401e8bb14 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c +++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c @@ -72,6 +72,7 @@ const struct pvr2_device_desc pvr2_device_descriptions[] = { .client_modules.cnt = ARRAY_SIZE(pvr2_client_29xxx), .fx2_firmware.lst = pvr2_fw1_names_29xxx, .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_29xxx), + .flag_has_hauppauge_rom = !0, }, [PVR2_HDW_TYPE_24XXX] = { .description = "WinTV PVR USB2 Model Category 24xxxx", @@ -82,6 +83,7 @@ const struct pvr2_device_desc pvr2_device_descriptions[] = { .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_24xxx), .flag_has_cx25840 = !0, .flag_has_wm8775 = !0, + .flag_has_hauppauge_rom = !0, }, }; diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.h b/drivers/media/video/pvrusb2/pvrusb2-devattr.h index 6576aefd27c3..f63c3ddb8a72 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-devattr.h +++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.h @@ -55,9 +55,16 @@ struct pvr2_device_desc { was initialized from internal ROM. */ struct pvr2_string_table fx2_firmware; + /* V4L tuner type ID to use with this device (only used if the + driver could not discover the type any other way). */ + int default_tuner_type; + /* If set, we don't bother trying to load cx23416 firmware. */ char flag_skip_cx23416_firmware; + /* Device has a hauppauge eeprom which we can interrogate. */ + char flag_has_hauppauge_rom; + /* Device does not require a powerup command to be issued. */ char flag_no_powerup; diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index 6a7b9af55e43..b7b2d90a4912 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -1428,6 +1428,7 @@ static int get_default_tuner_type(struct pvr2_hdw *hdw) } if (tp < 0) return -EINVAL; hdw->tuner_type = tp; + hdw->tuner_updated = !0; return 0; } @@ -1669,15 +1670,22 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw) // thread-safe against the normal pvr2_send_request() mechanism. // (We should make it thread safe). - ret = pvr2_hdw_get_eeprom_addr(hdw); - if (!pvr2_hdw_dev_ok(hdw)) return; - if (ret < 0) { - pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "Unable to determine location of eeprom, skipping"); - } else { - hdw->eeprom_addr = ret; - pvr2_eeprom_analyze(hdw); + if (hdw->hdw_desc->flag_has_hauppauge_rom) { + ret = pvr2_hdw_get_eeprom_addr(hdw); if (!pvr2_hdw_dev_ok(hdw)) return; + if (ret < 0) { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "Unable to determine location of eeprom," + " skipping"); + } else { + hdw->eeprom_addr = ret; + pvr2_eeprom_analyze(hdw); + if (!pvr2_hdw_dev_ok(hdw)) return; + } + } else { + hdw->tuner_type = hdw->hdw_desc->default_tuner_type; + hdw->tuner_updated = !0; + hdw->std_mask_eeprom = V4L2_STD_ALL; } pvr2_hdw_setup_std(hdw); @@ -1686,7 +1694,6 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw) pvr2_trace(PVR2_TRACE_INIT, "pvr2_hdw_setup: Tuner type overridden to %d", hdw->tuner_type); - hdw->tuner_updated = !0; } pvr2_i2c_core_check_stale(hdw); -- cgit v1.2.3-59-g8ed1b From f5174af201f2e22c101bb02d06343e4bc5f056de Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Mon, 26 Nov 2007 02:07:26 -0300 Subject: V4L/DVB (6698): pvrusb2: Implement signal routing schemes The exact routing of video and audio signals within a device is a device-specific attribute. Hauppauge devices do it one way; other types of device may route things differently. Unfortunately it is rather impractical to define chip-specific routing at the device attribute level, so instead what happens here is that "schemes" are defined. Each chip level interface implements its part of a given scheme and the scheme as a whole is made into a device specific attribute controlled via a table entry in pvrusb2-devattr.c. The only scheme defined here is for Hauppauge devices, but clearly this opens the door for other possibilities to follow. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-audio.c | 62 +++++++++++++------- drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c | 69 ++++++++++++++++------- drivers/media/video/pvrusb2/pvrusb2-devattr.c | 2 + drivers/media/video/pvrusb2/pvrusb2-devattr.h | 9 +++ drivers/media/video/pvrusb2/pvrusb2-video-v4l.c | 51 ++++++++++++----- 5 files changed, 140 insertions(+), 53 deletions(-) diff --git a/drivers/media/video/pvrusb2/pvrusb2-audio.c b/drivers/media/video/pvrusb2/pvrusb2-audio.c index 379645e481c6..9a7c8e9c3e8b 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-audio.c +++ b/drivers/media/video/pvrusb2/pvrusb2-audio.c @@ -35,34 +35,58 @@ struct pvr2_msp3400_handler { }; + +struct routing_scheme { + const int *def; + unsigned int cnt; +}; + +static const int routing_scheme0[] = { + [PVR2_CVAL_INPUT_TV] = MSP_INPUT_DEFAULT, + [PVR2_CVAL_INPUT_RADIO] = MSP_INPUT(MSP_IN_SCART2, + MSP_IN_TUNER1, + MSP_DSP_IN_SCART, + MSP_DSP_IN_SCART), + [PVR2_CVAL_INPUT_COMPOSITE] = MSP_INPUT(MSP_IN_SCART1, + MSP_IN_TUNER1, + MSP_DSP_IN_SCART, + MSP_DSP_IN_SCART), + [PVR2_CVAL_INPUT_SVIDEO] = MSP_INPUT(MSP_IN_SCART1, + MSP_IN_TUNER1, + MSP_DSP_IN_SCART, + MSP_DSP_IN_SCART), +}; + +static const struct routing_scheme routing_schemes[] = { + [PVR2_ROUTING_SCHEME_HAUPPAUGE] = { + .def = routing_scheme0, + .cnt = ARRAY_SIZE(routing_scheme0), + }, +}; + /* This function selects the correct audio input source */ static void set_stereo(struct pvr2_msp3400_handler *ctxt) { struct pvr2_hdw *hdw = ctxt->hdw; struct v4l2_routing route; + const struct routing_scheme *sp; + unsigned int sid = hdw->hdw_desc->signal_routing_scheme; pvr2_trace(PVR2_TRACE_CHIPS,"i2c msp3400 v4l2 set_stereo"); - route.input = MSP_INPUT_DEFAULT; - route.output = MSP_OUTPUT(MSP_SC_IN_DSP_SCART1); - switch (hdw->input_val) { - case PVR2_CVAL_INPUT_TV: - break; - case PVR2_CVAL_INPUT_RADIO: - /* Assume that msp34xx also handle FM decoding, in which case - we're still using the tuner. */ - /* HV: actually it is more likely to be the SCART2 input if - the ivtv experience is any indication. */ - route.input = MSP_INPUT(MSP_IN_SCART2, MSP_IN_TUNER1, - MSP_DSP_IN_SCART, MSP_DSP_IN_SCART); - break; - case PVR2_CVAL_INPUT_SVIDEO: - case PVR2_CVAL_INPUT_COMPOSITE: - /* SCART 1 input */ - route.input = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, - MSP_DSP_IN_SCART, MSP_DSP_IN_SCART); - break; + if ((sid < ARRAY_SIZE(routing_schemes)) && + ((sp = routing_schemes + sid) != 0) && + (hdw->input_val >= 0) && + (hdw->input_val < sp->cnt)) { + route.input = sp->def[hdw->input_val]; + } else { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "*** WARNING *** i2c msp3400 v4l2 set_stereo:" + " Invalid routing scheme (%u) and/or input (%d)", + sid,hdw->input_val); + return; } + route.output = MSP_OUTPUT(MSP_SC_IN_DSP_SCART1); pvr2_i2c_client_cmd(ctxt->client,VIDIOC_INT_S_AUDIO_ROUTING,&route); } diff --git a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c b/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c index 2cca817e4144..b6714c41ea75 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c +++ b/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c @@ -49,34 +49,65 @@ struct pvr2_v4l_cx2584x { }; +struct routing_scheme_item { + int vid; + int aud; +}; + +struct routing_scheme { + const struct routing_scheme_item *def; + unsigned int cnt; +}; + +static const struct routing_scheme_item routing_scheme0[] = { + [PVR2_CVAL_INPUT_TV] = { + .vid = CX25840_COMPOSITE7, + .aud = CX25840_AUDIO8, + }, + [PVR2_CVAL_INPUT_RADIO] = { /* Treat the same as composite */ + .vid = CX25840_COMPOSITE3, + .aud = CX25840_AUDIO_SERIAL, + }, + [PVR2_CVAL_INPUT_COMPOSITE] = { + .vid = CX25840_COMPOSITE3, + .aud = CX25840_AUDIO_SERIAL, + }, + [PVR2_CVAL_INPUT_SVIDEO] = { + .vid = CX25840_SVIDEO1, + .aud = CX25840_AUDIO_SERIAL, + }, +}; + +static const struct routing_scheme routing_schemes[] = { + [PVR2_ROUTING_SCHEME_HAUPPAUGE] = { + .def = routing_scheme0, + .cnt = ARRAY_SIZE(routing_scheme0), + }, +}; + static void set_input(struct pvr2_v4l_cx2584x *ctxt) { struct pvr2_hdw *hdw = ctxt->hdw; struct v4l2_routing route; enum cx25840_video_input vid_input; enum cx25840_audio_input aud_input; + const struct routing_scheme *sp; + unsigned int sid = hdw->hdw_desc->signal_routing_scheme; memset(&route,0,sizeof(route)); - switch(hdw->input_val) { - case PVR2_CVAL_INPUT_TV: - vid_input = CX25840_COMPOSITE7; - aud_input = CX25840_AUDIO8; - break; - case PVR2_CVAL_INPUT_RADIO: // Treat same as composite - case PVR2_CVAL_INPUT_COMPOSITE: - vid_input = CX25840_COMPOSITE3; - aud_input = CX25840_AUDIO_SERIAL; - break; - case PVR2_CVAL_INPUT_SVIDEO: - vid_input = CX25840_SVIDEO1; - aud_input = CX25840_AUDIO_SERIAL; - break; - default: - // Just set it to be composite input for now... - vid_input = CX25840_COMPOSITE3; - aud_input = CX25840_AUDIO_SERIAL; - break; + if ((sid < ARRAY_SIZE(routing_schemes)) && + ((sp = routing_schemes + sid) != 0) && + (hdw->input_val >= 0) && + (hdw->input_val < sp->cnt)) { + vid_input = sp->def[hdw->input_val].vid; + aud_input = sp->def[hdw->input_val].aud; + } else { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "*** WARNING *** i2c cx2584x set_input:" + " Invalid routing scheme (%u) and/or input (%d)", + sid,hdw->input_val); + return; } pvr2_trace(PVR2_TRACE_CHIPS,"i2c cx2584x set_input vid=0x%x aud=0x%x", diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c index 54a401e8bb14..464a13a06494 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c +++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c @@ -73,6 +73,7 @@ const struct pvr2_device_desc pvr2_device_descriptions[] = { .fx2_firmware.lst = pvr2_fw1_names_29xxx, .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_29xxx), .flag_has_hauppauge_rom = !0, + .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, }, [PVR2_HDW_TYPE_24XXX] = { .description = "WinTV PVR USB2 Model Category 24xxxx", @@ -84,6 +85,7 @@ const struct pvr2_device_desc pvr2_device_descriptions[] = { .flag_has_cx25840 = !0, .flag_has_wm8775 = !0, .flag_has_hauppauge_rom = !0, + .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, }, }; diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.h b/drivers/media/video/pvrusb2/pvrusb2-devattr.h index f63c3ddb8a72..05eb2c669ee8 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-devattr.h +++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.h @@ -35,6 +35,7 @@ struct pvr2_string_table { unsigned int cnt; }; +#define PVR2_ROUTING_SCHEME_HAUPPAUGE 0 /* This describes a particular hardware type (except for the USB device ID which must live in a separate structure due to environmental @@ -55,6 +56,14 @@ struct pvr2_device_desc { was initialized from internal ROM. */ struct pvr2_string_table fx2_firmware; + /* Signal routing scheme used by device, contains one of + PVR2_ROUTING_SCHEME_XXX. Schemes have to be defined as we + encounter them. This is an arbitrary integer scheme id; its + meaning is contained entirely within the driver and is + interpreted by logic which must send commands to the chip-level + drivers (search for things which touch this field). */ + unsigned int signal_routing_scheme; + /* V4L tuner type ID to use with this device (only used if the driver could not discover the type any other way). */ int default_tuner_type; diff --git a/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c b/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c index 767e49022f9b..7c47345501b6 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c +++ b/drivers/media/video/pvrusb2/pvrusb2-video-v4l.c @@ -49,29 +49,50 @@ struct pvr2_v4l_decoder { }; +struct routing_scheme { + const int *def; + unsigned int cnt; +}; + + +static const int routing_scheme0[] = { + [PVR2_CVAL_INPUT_TV] = SAA7115_COMPOSITE4, + /* In radio mode, we mute the video, but point at one + spot just to stay consistent */ + [PVR2_CVAL_INPUT_RADIO] = SAA7115_COMPOSITE5, + [PVR2_CVAL_INPUT_COMPOSITE] = SAA7115_COMPOSITE5, + [PVR2_CVAL_INPUT_SVIDEO] = SAA7115_SVIDEO2, +}; + +static const struct routing_scheme routing_schemes[] = { + [PVR2_ROUTING_SCHEME_HAUPPAUGE] = { + .def = routing_scheme0, + .cnt = ARRAY_SIZE(routing_scheme0), + }, +}; + static void set_input(struct pvr2_v4l_decoder *ctxt) { struct pvr2_hdw *hdw = ctxt->hdw; struct v4l2_routing route; + const struct routing_scheme *sp; + unsigned int sid = hdw->hdw_desc->signal_routing_scheme; pvr2_trace(PVR2_TRACE_CHIPS,"i2c v4l2 set_input(%d)",hdw->input_val); - switch(hdw->input_val) { - case PVR2_CVAL_INPUT_TV: - route.input = SAA7115_COMPOSITE4; - break; - case PVR2_CVAL_INPUT_COMPOSITE: - route.input = SAA7115_COMPOSITE5; - break; - case PVR2_CVAL_INPUT_SVIDEO: - route.input = SAA7115_SVIDEO2; - break; - case PVR2_CVAL_INPUT_RADIO: - // In radio mode, we mute the video, but point at one - // spot just to stay consistent - route.input = SAA7115_COMPOSITE5; - default: + + if ((sid < ARRAY_SIZE(routing_schemes)) && + ((sp = routing_schemes + sid) != 0) && + (hdw->input_val >= 0) && + (hdw->input_val < sp->cnt)) { + route.input = sp->def[hdw->input_val]; + } else { + pvr2_trace(PVR2_TRACE_ERROR_LEGS, + "*** WARNING *** i2c v4l2 set_input:" + " Invalid routing scheme (%u) and/or input (%d)", + sid,hdw->input_val); return; } + route.output = 0; pvr2_i2c_client_cmd(ctxt->client,VIDIOC_INT_S_VIDEO_ROUTING,&route); } -- cgit v1.2.3-59-g8ed1b From 056d1a899201f02777a35a32f8e6c9a2aac63f63 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Mon, 26 Nov 2007 02:09:42 -0300 Subject: V4L/DVB (6699): pvrusb2: Use of virtual IR chip is a device-specific attribute For Hauppauge 24xxx devices, the IR receiver is a custom piece of logic that is very specific to the device. The pvrusb2 driver can virtualize this to make it look like a more normal IR receiver found in other Hauppauge devices. The decision of whether or not to enable this virtualization however is a device-specific attribute, thus this changeset. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-devattr.c | 1 + drivers/media/video/pvrusb2/pvrusb2-devattr.h | 4 ++++ drivers/media/video/pvrusb2/pvrusb2-i2c-core.c | 2 +- 3 files changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c index 464a13a06494..6ba0b79e3a1e 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c +++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c @@ -85,6 +85,7 @@ const struct pvr2_device_desc pvr2_device_descriptions[] = { .flag_has_cx25840 = !0, .flag_has_wm8775 = !0, .flag_has_hauppauge_rom = !0, + .flag_has_hauppauge_custom_ir = !0, .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, }, }; diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.h b/drivers/media/video/pvrusb2/pvrusb2-devattr.h index 05eb2c669ee8..2aff5a3d5a55 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-devattr.h +++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.h @@ -84,6 +84,10 @@ struct pvr2_device_desc { /* Device has a wm8775 - this enables special additional logic to ensure that it is found. */ char flag_has_wm8775; + + /* Device has IR hardware that can be faked into looking like a + normal Hauppauge i2c IR receiver. */ + char flag_has_hauppauge_custom_ir; }; extern const struct pvr2_device_desc pvr2_device_descriptions[]; diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c index 7721ec85d572..62867fa3517a 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c +++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c @@ -980,7 +980,7 @@ void pvr2_i2c_core_init(struct pvr2_hdw *hdw) printk(KERN_INFO "%s: IR disabled\n",hdw->name); hdw->i2c_func[0x18] = i2c_black_hole; } else if (ir_mode[hdw->unit_number] == 1) { - if (hdw->hdw_desc->flag_has_cx25840) { + if (hdw->hdw_desc->flag_has_hauppauge_custom_ir) { hdw->i2c_func[0x18] = i2c_24xxx_ir; } } -- cgit v1.2.3-59-g8ed1b From 65bd80fe18b6abb63776746646321b41b44d70a7 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Mon, 26 Nov 2007 02:11:38 -0300 Subject: V4L/DVB (6700): pvrusb2: Soften the crashed encoder warning message The pvrusb2 driver has been successfully recovering from a crashed encoder now for over 2 years. I think it's time to reduce the perceived severity of the warning message. While I'd still very much like to stop these crashes, the recovery logic is solid enough that the problem is effectively benign. No point in panicing the users over it. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-encoder.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/media/video/pvrusb2/pvrusb2-encoder.c b/drivers/media/video/pvrusb2/pvrusb2-encoder.c index 4271b4132664..52b39954f990 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-encoder.c +++ b/drivers/media/video/pvrusb2/pvrusb2-encoder.c @@ -286,8 +286,7 @@ static int pvr2_encoder_cmd(void *ctxt, pvr2_trace( PVR2_TRACE_ERROR_LEGS, "Giving up on command." - " It is likely that" - " this is a bad idea..."); + " This is normally recovered by the driver."); break; } wrData[0] = 0x7; -- cgit v1.2.3-59-g8ed1b From 9e2e3aeb2d2c8bf64b04e1f5747f1d9842df43de Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Mon, 26 Nov 2007 02:14:23 -0300 Subject: V4L/DVB (6701): pvrusb2: Enable support for "GOTVIEW USB2.0 DVD2" hardware This changeset allows the pvrusb2 driver to operate a new device type ("GOTVIEW USB2.0 DVD2"). Changes amount to defining a new routing scheme for the device and adding appropriate table entries into pvrusb2-devattr.c. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c | 24 +++++++++++++++++++++++ drivers/media/video/pvrusb2/pvrusb2-devattr.c | 20 +++++++++++++++++++ drivers/media/video/pvrusb2/pvrusb2-devattr.h | 1 + 3 files changed, 45 insertions(+) diff --git a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c b/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c index b6714c41ea75..ffdc45c324e5 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c +++ b/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c @@ -78,11 +78,35 @@ static const struct routing_scheme_item routing_scheme0[] = { }, }; +/* Specific to gotview device */ +static const struct routing_scheme_item routing_schemegv[] = { + [PVR2_CVAL_INPUT_TV] = { + .vid = CX25840_COMPOSITE2, + .aud = CX25840_AUDIO5, + }, + [PVR2_CVAL_INPUT_RADIO] = { /* Treat the same as composite */ + .vid = CX25840_COMPOSITE1, + .aud = CX25840_AUDIO_SERIAL, + }, + [PVR2_CVAL_INPUT_COMPOSITE] = { + .vid = CX25840_COMPOSITE1, + .aud = CX25840_AUDIO_SERIAL, + }, + [PVR2_CVAL_INPUT_SVIDEO] = { + .vid = (CX25840_SVIDEO_LUMA3|CX25840_SVIDEO_CHROMA4), + .aud = CX25840_AUDIO_SERIAL, + }, +}; + static const struct routing_scheme routing_schemes[] = { [PVR2_ROUTING_SCHEME_HAUPPAUGE] = { .def = routing_scheme0, .cnt = ARRAY_SIZE(routing_scheme0), }, + [PVR2_ROUTING_SCHEME_GOTVIEW] = { + .def = routing_schemegv, + .cnt = ARRAY_SIZE(routing_schemegv), + }, }; static void set_input(struct pvr2_v4l_cx2584x *ctxt) diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c index 6ba0b79e3a1e..e0a5bb9a9587 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c +++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c @@ -29,14 +29,20 @@ pvr2_device_desc structures. #include "pvrusb2-devattr.h" #include +/* All this is needed in order to pull in tuner type ids... */ +#include +#include +#include /* Known major hardware variants, keyed from device ID */ #define PVR2_HDW_TYPE_29XXX 0 #define PVR2_HDW_TYPE_24XXX 1 +#define PVR2_HDW_TYPE_GOTVIEW_2 2 struct usb_device_id pvr2_device_table[] = { [PVR2_HDW_TYPE_29XXX] = { USB_DEVICE(0x2040, 0x2900) }, [PVR2_HDW_TYPE_24XXX] = { USB_DEVICE(0x2040, 0x2400) }, + [PVR2_HDW_TYPE_GOTVIEW_2] = { USB_DEVICE(0x1164, 0x0622) }, { } }; @@ -54,6 +60,12 @@ static const char *pvr2_client_29xxx[] = { "tuner", }; +// Names of other client modules to request for Gotview 2 model hardware +static const char *pvr2_client_gotview_2[] = { + "cx25840", + "tuner", +}; + /* Firmware file name(s) for 29xxx devices */ static const char *pvr2_fw1_names_29xxx[] = { "v4l-pvrusb2-29xxx-01.fw", @@ -88,6 +100,14 @@ const struct pvr2_device_desc pvr2_device_descriptions[] = { .flag_has_hauppauge_custom_ir = !0, .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, }, + [PVR2_HDW_TYPE_GOTVIEW_2] = { + .description = "Gotview USB 2.0 DVD 2", + .shortname = "gv2", + .client_modules.lst = pvr2_client_gotview_2, + .client_modules.cnt = ARRAY_SIZE(pvr2_client_gotview_2), + .default_tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .signal_routing_scheme = PVR2_ROUTING_SCHEME_GOTVIEW, + }, }; const unsigned int pvr2_device_count = ARRAY_SIZE(pvr2_device_descriptions); diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.h b/drivers/media/video/pvrusb2/pvrusb2-devattr.h index 2aff5a3d5a55..b9517e1cac08 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-devattr.h +++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.h @@ -36,6 +36,7 @@ struct pvr2_string_table { }; #define PVR2_ROUTING_SCHEME_HAUPPAUGE 0 +#define PVR2_ROUTING_SCHEME_GOTVIEW 1 /* This describes a particular hardware type (except for the USB device ID which must live in a separate structure due to environmental -- cgit v1.2.3-59-g8ed1b From 482cb9a75ba5df68f4bcbe806c838eaf28af34c0 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Tue, 27 Nov 2007 16:58:33 -0300 Subject: V4L/DVB (6702): pvrusb2: fix typo in comments Firmware file name(s) for 24xxx devices Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-devattr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c index e0a5bb9a9587..e4a311a81000 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c +++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c @@ -71,7 +71,7 @@ static const char *pvr2_fw1_names_29xxx[] = { "v4l-pvrusb2-29xxx-01.fw", }; -/* Firmware file name(s) for 29xxx devices */ +/* Firmware file name(s) for 24xxx devices */ static const char *pvr2_fw1_names_24xxx[] = { "v4l-pvrusb2-24xxx-01.fw", }; -- cgit v1.2.3-59-g8ed1b From ea2562d94fade3d6ee9b22ed5addbbdba697d22a Mon Sep 17 00:00:00 2001 From: Roel Kluin <12o3l@tiscali.nl> Date: Sun, 2 Dec 2007 23:04:57 -0300 Subject: V4L/DVB (6703): pvrusb2: Change division to bit-or for tveeprom standards Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-hdw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index b7b2d90a4912..a45721f78848 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -1514,7 +1514,7 @@ const static struct pvr2_std_hack std_eeprom_maps[] = { }, { /* PAL(D/D1/K) */ .pat = V4L2_STD_DK, - .std = V4L2_STD_PAL_D/V4L2_STD_PAL_D1|V4L2_STD_PAL_K, + .std = V4L2_STD_PAL_D|V4L2_STD_PAL_D1|V4L2_STD_PAL_K, }, }; -- cgit v1.2.3-59-g8ed1b From 6a540254966f8a01de0f7c78a27db17458c2d8f5 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Sun, 2 Dec 2007 23:51:34 -0300 Subject: V4L/DVB (6705): pvrusb2: Implement default standard selection based on device type This adds a default video standard setting to the pvr2_device_desc structure for describing device types. With this change it is possible to set a reasonable default standard based on device type. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-devattr.c | 3 +-- drivers/media/video/pvrusb2/pvrusb2-devattr.h | 7 +++++++ drivers/media/video/pvrusb2/pvrusb2-hdw.c | 6 +++++- 3 files changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c index e4a311a81000..eed64571ca0b 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c +++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c @@ -29,9 +29,8 @@ pvr2_device_desc structures. #include "pvrusb2-devattr.h" #include -/* All this is needed in order to pull in tuner type ids... */ +/* This is needed in order to pull in tuner type ids... */ #include -#include #include /* Known major hardware variants, keyed from device ID */ diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.h b/drivers/media/video/pvrusb2/pvrusb2-devattr.h index b9517e1cac08..830f27961e1e 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-devattr.h +++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.h @@ -22,6 +22,7 @@ #define __PVRUSB2_DEVATTR_H #include +#include /* @@ -69,6 +70,12 @@ struct pvr2_device_desc { driver could not discover the type any other way). */ int default_tuner_type; + /* Initial standard bits to use for this device, if not zero. + Anything set here is also implied as an available standard. + Note: This is ignored if overridden on the module load line via + the video_std module option. */ + v4l2_std_id default_std_mask; + /* If set, we don't bother trying to load cx23416 firmware. */ char flag_skip_cx23416_firmware; diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index a45721f78848..08b513b6014f 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -1439,8 +1439,12 @@ static v4l2_std_id get_default_standard(struct pvr2_hdw *hdw) int tp = 0; if ((unit_number >= 0) && (unit_number < PVR_NUM)) { tp = video_std[unit_number]; + if (tp) return tp; } - return tp; + if (hdw->hdw_desc->default_std_mask) { + return hdw->hdw_desc->default_std_mask; + } + return 0; } -- cgit v1.2.3-59-g8ed1b From 26e33048aad0486c98155b1406037f02fe70cb1b Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Mon, 3 Dec 2007 01:43:23 -0300 Subject: V4L/DVB (6706): pvrusb2: Remove use of volatile in command sequencer pvrusb2: Remove use of volatile for command sequencer; these variables are set by interrupt-context code and we check their state in such a manner that there should be no race conditions. This had originally been done out of paranoia, and I have since been convinced that the paranoia is not required. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h index 894c630c95c0..c79d3a68dbd7 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h @@ -217,9 +217,9 @@ struct pvr2_hdw { struct urb *ctl_read_urb; unsigned char *ctl_write_buffer; unsigned char *ctl_read_buffer; - volatile int ctl_write_pend_flag; - volatile int ctl_read_pend_flag; - volatile int ctl_timeout_flag; + int ctl_write_pend_flag; + int ctl_read_pend_flag; + int ctl_timeout_flag; struct completion ctl_done; unsigned char cmd_buffer[PVR2_CTL_BUFFSIZE]; int cmd_debug_state; // Low level command debugging info -- cgit v1.2.3-59-g8ed1b From e802c14b91e3fddd50652270756124a69e550113 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Mon, 3 Dec 2007 01:44:43 -0300 Subject: V4L/DVB (6707): pvrusb2: Remove use of volatile in pipeline control state machine pvrusb2: Eliminate use of volatile in pipeline control state variables. These were all cases of paranoia; upon further review the overall mechanism employed here should not require use of volatile. This had originally been done out of paranoia, and I have since been convinced that the paranoia is not required. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h index c79d3a68dbd7..d7a216b41b72 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h @@ -229,14 +229,14 @@ struct pvr2_hdw { /* Bits of state that describe what is going on with various parts of the driver. */ - volatile int state_encoder_ok; /* Encoder is operational */ - volatile int state_encoder_run; /* Encoder is running */ - volatile int state_encoder_config; /* Encoder is configured */ - volatile int state_encoder_waitok; /* Encoder pre-wait done */ - volatile int state_decoder_run; /* Decoder is running */ - volatile int state_usbstream_run; /* FX2 is streaming */ - volatile int state_decoder_quiescent; /* Decoder idle for > 50msec */ - volatile int state_pipeline_config; /* Pipeline is configured */ + int state_encoder_ok; /* Encoder is operational */ + int state_encoder_run; /* Encoder is running */ + int state_encoder_config; /* Encoder is configured */ + int state_encoder_waitok; /* Encoder pre-wait done */ + int state_decoder_run; /* Decoder is running */ + int state_usbstream_run; /* FX2 is streaming */ + int state_decoder_quiescent; /* Decoder idle for > 50msec */ + int state_pipeline_config; /* Pipeline is configured */ int state_pipeline_req; /* Somebody wants to stream */ int state_pipeline_pause; /* Pipeline must be paused */ int state_pipeline_idle; /* Pipeline not running */ -- cgit v1.2.3-59-g8ed1b From 4ca7f7092815cad5cb3a9377dce211202fe4b328 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Mon, 3 Dec 2007 01:45:26 -0300 Subject: V4L/DVB (6708): pvrusb2: Expand comment in device attributes description Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-devattr.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.h b/drivers/media/video/pvrusb2/pvrusb2-devattr.h index 830f27961e1e..a9c3d99b602d 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-devattr.h +++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.h @@ -94,7 +94,13 @@ struct pvr2_device_desc { char flag_has_wm8775; /* Device has IR hardware that can be faked into looking like a - normal Hauppauge i2c IR receiver. */ + normal Hauppauge i2c IR receiver. This is currently very + specific to the 24xxx device, where Hauppauge had replaced their + 'standard' I2C IR receiver with a bunch of FPGA logic controlled + directly via the FX2. Turning this on tells the pvrusb2 driver + to virtualize the presence of the non-existant IR receiver chip and + implement the virtual receiver in terms of appropriate FX2 + commands. */ char flag_has_hauppauge_custom_ir; }; -- cgit v1.2.3-59-g8ed1b From 3d290bdb283c9dc897c5fd160fe3d07ead426c45 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Mon, 3 Dec 2007 01:47:12 -0300 Subject: V4L/DVB (6709): pvrusb2: minor rework for default video standard handling pvrusb2: When a per-device-type default video standard is declared, handle it in such a way that it can be correctly and unambiguously reported in the system log. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-hdw.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index 08b513b6014f..54d2c4ab7a31 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -1441,9 +1441,6 @@ static v4l2_std_id get_default_standard(struct pvr2_hdw *hdw) tp = video_std[unit_number]; if (tp) return tp; } - if (hdw->hdw_desc->default_std_mask) { - return hdw->hdw_desc->default_std_mask; - } return 0; } @@ -1526,9 +1523,10 @@ static void pvr2_hdw_setup_std(struct pvr2_hdw *hdw) { char buf[40]; unsigned int bcnt; - v4l2_std_id std1,std2; + v4l2_std_id std1,std2,std3; std1 = get_default_standard(hdw); + std3 = std1 ? 0 : hdw->hdw_desc->default_std_mask; bcnt = pvr2_std_id_to_str(buf,sizeof(buf),hdw->std_mask_eeprom); pvr2_trace(PVR2_TRACE_STD, @@ -1538,7 +1536,7 @@ static void pvr2_hdw_setup_std(struct pvr2_hdw *hdw) hdw->std_mask_avail = hdw->std_mask_eeprom; - std2 = std1 & ~hdw->std_mask_avail; + std2 = (std1|std3) & ~hdw->std_mask_avail; if (std2) { bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std2); pvr2_trace(PVR2_TRACE_STD, @@ -1560,6 +1558,16 @@ static void pvr2_hdw_setup_std(struct pvr2_hdw *hdw) pvr2_hdw_internal_find_stdenum(hdw); return; } + if (std3) { + bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std3); + pvr2_trace(PVR2_TRACE_STD, + "Initial video standard" + " (determined by device type): %.*s",bcnt,buf); + hdw->std_mask_cur = std3; + hdw->std_dirty = !0; + pvr2_hdw_internal_find_stdenum(hdw); + return; + } { unsigned int idx; -- cgit v1.2.3-59-g8ed1b From 9de982d3117a3f83e4e7b14016a1df25b4a693d6 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Mon, 3 Dec 2007 02:10:04 -0300 Subject: V4L/DVB (6710): pvrusb2: Recognize ATSC video standard bit values Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-std.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/media/video/pvrusb2/pvrusb2-std.c b/drivers/media/video/pvrusb2/pvrusb2-std.c index 63e55bb59fcb..da309288daa4 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-std.c +++ b/drivers/media/video/pvrusb2/pvrusb2-std.c @@ -50,6 +50,10 @@ struct std_name { V4L2_STD_NTSC_M_KR| \ V4L2_STD_NTSC_443) +#define CSTD_ATSC \ + (V4L2_STD_ATSC_8_VSB| \ + V4L2_STD_ATSC_16_VSB) + #define CSTD_SECAM \ (V4L2_STD_SECAM_B| \ V4L2_STD_SECAM_D| \ @@ -82,6 +86,7 @@ static const struct std_name std_groups[] = { {"PAL",CSTD_PAL}, {"NTSC",CSTD_NTSC}, {"SECAM",CSTD_SECAM}, + {"ATSC",CSTD_ATSC}, }; /* Mapping of standard bits to modulation system */ @@ -104,6 +109,8 @@ static const struct std_name std_items[] = { {"N",TSTD_N}, {"Nc",TSTD_Nc}, {"60",TSTD_60}, + {"8VSB",V4L2_STD_ATSC_8_VSB}, + {"16VSB",V4L2_STD_ATSC_16_VSB}, }; -- cgit v1.2.3-59-g8ed1b From c240ad00af78228726e6301ad6ffc54d3adce2a0 Mon Sep 17 00:00:00 2001 From: Ian Armstrong Date: Tue, 16 Oct 2007 03:21:46 -0300 Subject: V4L/DVB (6712): ivtv: ivtv yuv stream handling change Currently the yuv output stream buffer is divided into blocks whose size depend on the broadcast standard selected during the driver init phase. However, the standard can be changed after the init phase. This effectively breaks the yuv output stream handler, since it relies on the different yuv planes being block aligned. This patch changes the setup, so that the block size is always the same. The decoder dma function has been modified to cope with the fact that the second yuv plane may no longer be block aligned. The start of the yuv frame must still be at the beginning of a block, so the stream write function has also been modified to ensure this is always true. Also, the stream write function will now initiate a yuv dma transfer as soon as a full frame is ready. It will not wait until the current write request has completed, or the stream buffer becomes full. Signed-off-by: Ian Armstrong Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-driver.c | 8 ++------ drivers/media/video/ivtv/ivtv-driver.h | 2 ++ drivers/media/video/ivtv/ivtv-fileops.c | 31 +++++++++++++++++++++++++++---- drivers/media/video/ivtv/ivtv-irq.c | 25 +++++++++++++++++++------ 4 files changed, 50 insertions(+), 16 deletions(-) diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index 04179b7d1af0..48db22cc1bd8 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -970,7 +970,6 @@ static int __devinit ivtv_probe(struct pci_dev *dev, const struct pci_device_id *pci_id) { int retval = 0; - int yuv_buf_size; int vbi_buf_size; struct ivtv *itv; @@ -1122,11 +1121,8 @@ static int __devinit ivtv_probe(struct pci_dev *dev, itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_MPG] = 0x08000; itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_PCM] = 0x01200; itv->stream_buf_size[IVTV_DEC_STREAM_TYPE_MPG] = 0x10000; - - /* 0x15180 == 720 * 480 / 4, 0x19500 == 720 * 576 / 4 */ - yuv_buf_size = itv->is_60hz ? 0x15180 : 0x19500; - itv->stream_buf_size[IVTV_DEC_STREAM_TYPE_YUV] = yuv_buf_size / 2; - itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_YUV] = yuv_buf_size / 8; + itv->stream_buf_size[IVTV_DEC_STREAM_TYPE_YUV] = 0x10000; + itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_YUV] = 0x08000; /* Setup VBI Raw Size. Should be big enough to hold PAL. It is possible to switch between PAL and NTSC, so we need to diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h index 49ce14d14a54..b6dd2360e610 100644 --- a/drivers/media/video/ivtv/ivtv-driver.h +++ b/drivers/media/video/ivtv/ivtv-driver.h @@ -485,6 +485,8 @@ struct yuv_playback_info void *blanking_ptr; dma_addr_t blanking_dmaptr; + + int stream_size; }; #define IVTV_VBI_FRAMES 32 diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c index a200a8a95a2d..58ad0d9c680a 100644 --- a/drivers/media/video/ivtv/ivtv-fileops.c +++ b/drivers/media/video/ivtv/ivtv-fileops.c @@ -542,6 +542,7 @@ ssize_t ivtv_v4l2_write(struct file *filp, const char __user *user_buf, size_t c struct ivtv_open_id *id = filp->private_data; struct ivtv *itv = id->itv; struct ivtv_stream *s = &itv->streams[id->type]; + struct yuv_playback_info *yi = &itv->yuv_info; struct ivtv_buffer *buf; struct ivtv_queue q; int bytes_written = 0; @@ -604,9 +605,16 @@ retry: /* copy user data into buffers */ while ((buf = ivtv_dequeue(s, &q))) { - /* Make sure we really got all the user data */ - rc = ivtv_buf_copy_from_user(s, buf, user_buf, count); + /* yuv is a pain. Don't copy more data than needed for a single + frame, otherwise we lose sync with the incoming stream */ + if (s->type == IVTV_DEC_STREAM_TYPE_YUV && + yi->stream_size + count > itv->dma_data_req_size) + rc = ivtv_buf_copy_from_user(s, buf, user_buf, + itv->dma_data_req_size - yi->stream_size); + else + rc = ivtv_buf_copy_from_user(s, buf, user_buf, count); + /* Make sure we really got all the user data */ if (rc < 0) { ivtv_queue_move(s, &q, NULL, &s->q_free, 0); return rc; @@ -615,6 +623,16 @@ retry: count -= rc; bytes_written += rc; + if (s->type == IVTV_DEC_STREAM_TYPE_YUV) { + yi->stream_size += rc; + /* If we have a complete yuv frame, break loop now */ + if (yi->stream_size == itv->dma_data_req_size) { + ivtv_enqueue(s, buf, &s->q_full); + yi->stream_size = 0; + break; + } + } + if (buf->bytesused != s->buf_size) { /* incomplete, leave in q_io for next time */ ivtv_enqueue(s, buf, &s->q_io); @@ -922,10 +940,15 @@ static int ivtv_serialized_open(struct ivtv_stream *s, struct file *filp) } /* YUV or MPG Decoding Mode? */ - if (s->type == IVTV_DEC_STREAM_TYPE_MPG) + if (s->type == IVTV_DEC_STREAM_TYPE_MPG) { clear_bit(IVTV_F_I_DEC_YUV, &itv->i_flags); - else if (s->type == IVTV_DEC_STREAM_TYPE_YUV) + } else if (s->type == IVTV_DEC_STREAM_TYPE_YUV) { set_bit(IVTV_F_I_DEC_YUV, &itv->i_flags); + /* For yuv, we need to know the dma size before we start */ + itv->dma_data_req_size = + itv->params.width * itv->params.height * 3 / 2; + itv->yuv_info.stream_size = 0; + } return 0; } diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c index fd1688e4757d..bcf1c85991af 100644 --- a/drivers/media/video/ivtv/ivtv-irq.c +++ b/drivers/media/video/ivtv/ivtv-irq.c @@ -313,15 +313,28 @@ void ivtv_dma_stream_dec_prepare(struct ivtv_stream *s, u32 offset, int lock) IVTV_DEBUG_HI_DMA("DEC PREPARE DMA %s: %08x %08x\n", s->name, s->q_predma.bytesused, offset); list_for_each_entry(buf, &s->q_predma.list, list) { /* YUV UV Offset from Y Buffer */ - if (s->type == IVTV_DEC_STREAM_TYPE_YUV && !y_done && bytes_written >= y_size) { + if (s->type == IVTV_DEC_STREAM_TYPE_YUV && !y_done && + (bytes_written + buf->bytesused) >= y_size) { + s->sg_pending[idx].src = buf->dma_handle; + s->sg_pending[idx].dst = offset; + s->sg_pending[idx].size = y_size - bytes_written; offset = uv_offset; + if (s->sg_pending[idx].size != buf->bytesused) { + idx++; + s->sg_pending[idx].src = + buf->dma_handle + s->sg_pending[idx - 1].size; + s->sg_pending[idx].dst = offset; + s->sg_pending[idx].size = + buf->bytesused - s->sg_pending[idx - 1].size; + offset += s->sg_pending[idx].size; + } y_done = 1; + } else { + s->sg_pending[idx].src = buf->dma_handle; + s->sg_pending[idx].dst = offset; + s->sg_pending[idx].size = buf->bytesused; + offset += buf->bytesused; } - s->sg_pending[idx].src = buf->dma_handle; - s->sg_pending[idx].dst = offset; - s->sg_pending[idx].size = buf->bytesused; - - offset += buf->bytesused; bytes_written += buf->bytesused; /* Sync SG buffers */ -- cgit v1.2.3-59-g8ed1b From a3e5f5e2dfb50bebca24329e5377d804c6e3eb1b Mon Sep 17 00:00:00 2001 From: Ian Armstrong Date: Sat, 20 Oct 2007 14:52:55 -0300 Subject: V4L/DVB (6713): ivtv: ivtv_yuv_prep_frame breakup and yuv hardware buffer changes ivtv_yuv_prep_frame is split in smaller code blocks. Modified yuv buffer handling on the PVR350 itself. We now cycle through all 8 hardware buffers. With this patch in place, driver behaviour should remain unchanged from the existing release. Signed-off-by: Ian Armstrong Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-driver.c | 1 + drivers/media/video/ivtv/ivtv-driver.h | 11 ++- drivers/media/video/ivtv/ivtv-irq.c | 31 +++---- drivers/media/video/ivtv/ivtv-yuv.c | 149 ++++++++++++++++++++------------- drivers/media/video/ivtv/ivtv-yuv.h | 7 +- 5 files changed, 117 insertions(+), 82 deletions(-) diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index 48db22cc1bd8..e3020f456641 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -697,6 +697,7 @@ static int __devinit ivtv_init_struct1(struct ivtv *itv) atomic_set(&itv->yuv_info.next_dma_frame, -1); itv->yuv_info.lace_mode = ivtv_yuv_mode; itv->yuv_info.lace_threshold = ivtv_yuv_threshold; + itv->yuv_info.max_frames_buffered = 3; return 0; } diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h index b6dd2360e610..12ff9382718d 100644 --- a/drivers/media/video/ivtv/ivtv-driver.h +++ b/drivers/media/video/ivtv/ivtv-driver.h @@ -403,6 +403,8 @@ struct yuv_frame_info #define IVTV_YUV_SYNC_ODD 0x04 #define IVTV_YUV_SYNC_MASK 0x04 +#define IVTV_YUV_BUFFERS 8 + struct yuv_playback_info { u32 reg_2834; @@ -475,11 +477,11 @@ struct yuv_playback_info u32 yuv_forced_update; int update_frame; - int sync_field[4]; /* Field to sync on */ - int field_delay[4]; /* Flag to extend duration of previous frame */ + int sync_field[IVTV_YUV_BUFFERS]; /* Field to sync on */ + int field_delay[IVTV_YUV_BUFFERS]; /* Flag to extend duration of previous frame */ u8 fields_lapsed; /* Counter used when delaying a frame */ - struct yuv_frame_info new_frame_info[4]; + struct yuv_frame_info new_frame_info[IVTV_YUV_BUFFERS]; struct yuv_frame_info old_frame_info; struct yuv_frame_info old_frame_info_args; @@ -487,6 +489,9 @@ struct yuv_playback_info dma_addr_t blanking_dmaptr; int stream_size; + + u8 draw_frame; /* PVR350 buffer to draw into */ + u8 max_frames_buffered; /* Maximum number of frames to buffer */ }; #define IVTV_VBI_FRAMES 32 diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c index bcf1c85991af..fc8eac09584c 100644 --- a/drivers/media/video/ivtv/ivtv-irq.c +++ b/drivers/media/video/ivtv/ivtv-irq.c @@ -744,24 +744,25 @@ static void ivtv_irq_vsync(struct ivtv *itv) * one vsync per frame. */ unsigned int frame = read_reg(0x28c0) & 1; + struct yuv_playback_info *yi = &itv->yuv_info; int last_dma_frame = atomic_read(&itv->yuv_info.next_dma_frame); if (0) IVTV_DEBUG_IRQ("DEC VSYNC\n"); - if (((frame ^ itv->yuv_info.sync_field[last_dma_frame]) == 0 && - ((itv->last_vsync_field & 1) ^ itv->yuv_info.sync_field[last_dma_frame])) || - (frame != (itv->last_vsync_field & 1) && !itv->yuv_info.frame_interlaced)) { + if (((frame ^ yi->sync_field[last_dma_frame]) == 0 && + ((itv->last_vsync_field & 1) ^ yi->sync_field[last_dma_frame])) || + (frame != (itv->last_vsync_field & 1) && !yi->frame_interlaced)) { int next_dma_frame = last_dma_frame; - if (!(itv->yuv_info.frame_interlaced && itv->yuv_info.field_delay[next_dma_frame] && itv->yuv_info.fields_lapsed < 1)) { - if (next_dma_frame >= 0 && next_dma_frame != atomic_read(&itv->yuv_info.next_fill_frame)) { + if (!(yi->frame_interlaced && yi->field_delay[next_dma_frame] && yi->fields_lapsed < 1)) { + if (next_dma_frame >= 0 && next_dma_frame != atomic_read(&yi->next_fill_frame)) { write_reg(yuv_offset[next_dma_frame] >> 4, 0x82c); write_reg((yuv_offset[next_dma_frame] + IVTV_YUV_BUFFER_UV_OFFSET) >> 4, 0x830); write_reg(yuv_offset[next_dma_frame] >> 4, 0x834); write_reg((yuv_offset[next_dma_frame] + IVTV_YUV_BUFFER_UV_OFFSET) >> 4, 0x838); - next_dma_frame = (next_dma_frame + 1) & 0x3; - atomic_set(&itv->yuv_info.next_dma_frame, next_dma_frame); - itv->yuv_info.fields_lapsed = -1; + next_dma_frame = (next_dma_frame + 1) % IVTV_YUV_BUFFERS; + atomic_set(&yi->next_dma_frame, next_dma_frame); + yi->fields_lapsed = -1; } } } @@ -794,20 +795,20 @@ static void ivtv_irq_vsync(struct ivtv *itv) } /* Check if we need to update the yuv registers */ - if ((itv->yuv_info.yuv_forced_update || itv->yuv_info.new_frame_info[last_dma_frame].update) && last_dma_frame != -1) { - if (!itv->yuv_info.new_frame_info[last_dma_frame].update) + if ((yi->yuv_forced_update || yi->new_frame_info[last_dma_frame].update) && last_dma_frame != -1) { + if (!yi->new_frame_info[last_dma_frame].update) last_dma_frame = (last_dma_frame - 1) & 3; - if (itv->yuv_info.new_frame_info[last_dma_frame].src_w) { - itv->yuv_info.update_frame = last_dma_frame; - itv->yuv_info.new_frame_info[last_dma_frame].update = 0; - itv->yuv_info.yuv_forced_update = 0; + if (yi->new_frame_info[last_dma_frame].src_w) { + yi->update_frame = last_dma_frame; + yi->new_frame_info[last_dma_frame].update = 0; + yi->yuv_forced_update = 0; set_bit(IVTV_F_I_WORK_HANDLER_YUV, &itv->i_flags); set_bit(IVTV_F_I_HAVE_WORK, &itv->i_flags); } } - itv->yuv_info.fields_lapsed ++; + yi->fields_lapsed++; } } diff --git a/drivers/media/video/ivtv/ivtv-yuv.c b/drivers/media/video/ivtv/ivtv-yuv.c index 9091c4837bbc..15e9bd2486d0 100644 --- a/drivers/media/video/ivtv/ivtv-yuv.c +++ b/drivers/media/video/ivtv/ivtv-yuv.c @@ -22,11 +22,16 @@ #include "ivtv-udma.h" #include "ivtv-yuv.h" -const u32 yuv_offset[4] = { - IVTV_YUV_BUFFER_OFFSET, - IVTV_YUV_BUFFER_OFFSET_1, - IVTV_YUV_BUFFER_OFFSET_2, - IVTV_YUV_BUFFER_OFFSET_3 +/* YUV buffer offsets */ +const u32 yuv_offset[IVTV_YUV_BUFFERS] = { + 0x001a8600, + 0x00240400, + 0x002d8200, + 0x00370000, + 0x00029000, + 0x000C0E00, + 0x006B0400, + 0x00748200 }; static int ivtv_yuv_prep_user_dma(struct ivtv *itv, struct ivtv_user_dma *dma, @@ -37,10 +42,9 @@ static int ivtv_yuv_prep_user_dma(struct ivtv *itv, struct ivtv_user_dma *dma, int i; int y_pages, uv_pages; - + u8 frame = itv->yuv_info.draw_frame; unsigned long y_buffer_offset, uv_buffer_offset; int y_decode_height, uv_decode_height, y_size; - int frame = atomic_read(&itv->yuv_info.next_fill_frame); y_buffer_offset = IVTV_DECODER_OFFSET + yuv_offset[frame]; uv_buffer_offset = y_buffer_offset + IVTV_YUV_BUFFER_UV_OFFSET; @@ -954,76 +958,105 @@ static void ivtv_yuv_init (struct ivtv *itv) atomic_set(&yi->next_dma_frame, 0); } -int ivtv_yuv_prep_frame(struct ivtv *itv, struct ivtv_dma_frame *args) +/* Get next available yuv buffer on PVR350 */ +void ivtv_yuv_next_free(struct ivtv *itv) { - DEFINE_WAIT(wait); - int rc = 0; - int got_sig = 0; - int frame, next_fill_frame, last_fill_frame; - int register_update = 0; + int draw, display; + struct yuv_playback_info *yi = &itv->yuv_info; - IVTV_DEBUG_INFO("yuv_prep_frame\n"); + if (atomic_read(&yi->next_dma_frame) == -1) + ivtv_yuv_init(itv); - if (atomic_read(&itv->yuv_info.next_dma_frame) == -1) ivtv_yuv_init(itv); + draw = atomic_read(&yi->next_fill_frame); + display = atomic_read(&yi->next_dma_frame); - frame = atomic_read(&itv->yuv_info.next_fill_frame); - next_fill_frame = (frame + 1) & 0x3; - last_fill_frame = (atomic_read(&itv->yuv_info.next_dma_frame)+1) & 0x3; + if (display > draw) + display -= IVTV_YUV_BUFFERS; - if (next_fill_frame != last_fill_frame && last_fill_frame != frame) { - /* Buffers are full - Overwrite the last frame */ - next_fill_frame = frame; - frame = (frame - 1) & 3; - register_update = itv->yuv_info.new_frame_info[frame].update; - } + if (draw - display >= yi->max_frames_buffered) + draw = (u8)(draw - 1) % IVTV_YUV_BUFFERS; + else + yi->new_frame_info[draw].update = 0; + + yi->draw_frame = draw; +} + +/* Set up frame according to ivtv_dma_frame parameters */ +void ivtv_yuv_setup_frame(struct ivtv *itv, struct ivtv_dma_frame *args) +{ + struct yuv_playback_info *yi = &itv->yuv_info; + u8 frame = yi->draw_frame; + + /* Preserve old update flag in case we're overwriting a queued frame */ + int register_update = yi->new_frame_info[frame].update; /* Take a snapshot of the yuv coordinate information */ - itv->yuv_info.new_frame_info[frame].src_x = args->src.left; - itv->yuv_info.new_frame_info[frame].src_y = args->src.top; - itv->yuv_info.new_frame_info[frame].src_w = args->src.width; - itv->yuv_info.new_frame_info[frame].src_h = args->src.height; - itv->yuv_info.new_frame_info[frame].dst_x = args->dst.left; - itv->yuv_info.new_frame_info[frame].dst_y = args->dst.top; - itv->yuv_info.new_frame_info[frame].dst_w = args->dst.width; - itv->yuv_info.new_frame_info[frame].dst_h = args->dst.height; - itv->yuv_info.new_frame_info[frame].tru_x = args->dst.left; - itv->yuv_info.new_frame_info[frame].tru_w = args->src_width; - itv->yuv_info.new_frame_info[frame].tru_h = args->src_height; + yi->new_frame_info[frame].src_x = args->src.left; + yi->new_frame_info[frame].src_y = args->src.top; + yi->new_frame_info[frame].src_w = args->src.width; + yi->new_frame_info[frame].src_h = args->src.height; + yi->new_frame_info[frame].dst_x = args->dst.left; + yi->new_frame_info[frame].dst_y = args->dst.top; + yi->new_frame_info[frame].dst_w = args->dst.width; + yi->new_frame_info[frame].dst_h = args->dst.height; + yi->new_frame_info[frame].tru_x = args->dst.left; + yi->new_frame_info[frame].tru_w = args->src_width; + yi->new_frame_info[frame].tru_h = args->src_height; /* Snapshot field order */ - itv->yuv_info.sync_field[frame] = itv->yuv_info.lace_sync_field; + yi->sync_field[frame] = yi->lace_sync_field; /* Are we going to offset the Y plane */ if (args->src.height + args->src.top < 512-16) - itv->yuv_info.new_frame_info[frame].offset_y = 1; + yi->new_frame_info[frame].offset_y = 1; else - itv->yuv_info.new_frame_info[frame].offset_y = 0; + yi->new_frame_info[frame].offset_y = 0; /* Snapshot the osd pan info */ - itv->yuv_info.new_frame_info[frame].pan_x = itv->yuv_info.osd_x_pan; - itv->yuv_info.new_frame_info[frame].pan_y = itv->yuv_info.osd_y_pan; - itv->yuv_info.new_frame_info[frame].vis_w = itv->yuv_info.osd_vis_w; - itv->yuv_info.new_frame_info[frame].vis_h = itv->yuv_info.osd_vis_h; - - itv->yuv_info.new_frame_info[frame].update = 0; - itv->yuv_info.new_frame_info[frame].interlaced_y = 0; - itv->yuv_info.new_frame_info[frame].interlaced_uv = 0; - itv->yuv_info.new_frame_info[frame].lace_mode = itv->yuv_info.lace_mode; - - if (memcmp (&itv->yuv_info.old_frame_info_args, &itv->yuv_info.new_frame_info[frame], - sizeof (itv->yuv_info.new_frame_info[frame]))) { - memcpy(&itv->yuv_info.old_frame_info_args, &itv->yuv_info.new_frame_info[frame], sizeof (itv->yuv_info.old_frame_info_args)); - itv->yuv_info.new_frame_info[frame].update = 1; -/* IVTV_DEBUG_YUV ("Requesting register update for frame %d\n",frame); */ + yi->new_frame_info[frame].pan_x = yi->osd_x_pan; + yi->new_frame_info[frame].pan_y = yi->osd_y_pan; + yi->new_frame_info[frame].vis_w = yi->osd_vis_w; + yi->new_frame_info[frame].vis_h = yi->osd_vis_h; + + yi->new_frame_info[frame].update = 0; + yi->new_frame_info[frame].interlaced_y = 0; + yi->new_frame_info[frame].interlaced_uv = 0; + yi->new_frame_info[frame].lace_mode = yi->lace_mode; + + if (memcmp(&yi->old_frame_info_args, &yi->new_frame_info[frame], + sizeof(yi->new_frame_info[frame]))) { + yi->old_frame_info_args = yi->new_frame_info[frame]; + yi->new_frame_info[frame].update = 1; +/* IVTV_DEBUG_YUV ("Requesting register update for frame %d\n",frame); */ } - itv->yuv_info.new_frame_info[frame].update |= register_update; + yi->new_frame_info[frame].update |= register_update; /* Should this frame be delayed ? */ - if (itv->yuv_info.sync_field[frame] != itv->yuv_info.sync_field[(frame - 1) & 3]) - itv->yuv_info.field_delay[frame] = 1; + if (yi->sync_field[frame] != + yi->sync_field[(frame - 1) % IVTV_YUV_BUFFERS]) + yi->field_delay[frame] = 1; else - itv->yuv_info.field_delay[frame] = 0; + yi->field_delay[frame] = 0; +} + +/* Frame is complete & ready for display */ +void ivtv_yuv_frame_complete(struct ivtv *itv) +{ + atomic_set(&itv->yuv_info.next_fill_frame, + (itv->yuv_info.draw_frame + 1) % IVTV_YUV_BUFFERS); +} + +int ivtv_yuv_prep_frame(struct ivtv *itv, struct ivtv_dma_frame *args) +{ + DEFINE_WAIT(wait); + int rc = 0; + int got_sig = 0; + + IVTV_DEBUG_INFO("yuv_prep_frame\n"); + + ivtv_yuv_next_free(itv); + ivtv_yuv_setup_frame(itv, args); /* DMA the frame */ mutex_lock(&itv->udma.lock); @@ -1057,7 +1090,7 @@ int ivtv_yuv_prep_frame(struct ivtv *itv, struct ivtv_dma_frame *args) return -EINTR; } - atomic_set(&itv->yuv_info.next_fill_frame, next_fill_frame); + ivtv_yuv_frame_complete(itv); mutex_unlock(&itv->udma.lock); return rc; diff --git a/drivers/media/video/ivtv/ivtv-yuv.h b/drivers/media/video/ivtv/ivtv-yuv.h index 3b966f0a204a..3b290927d367 100644 --- a/drivers/media/video/ivtv/ivtv-yuv.h +++ b/drivers/media/video/ivtv/ivtv-yuv.h @@ -21,11 +21,6 @@ #ifndef IVTV_YUV_H #define IVTV_YUV_H -/* Buffers on hardware offsets */ -#define IVTV_YUV_BUFFER_OFFSET 0x001a8600 /* First YUV Buffer */ -#define IVTV_YUV_BUFFER_OFFSET_1 0x00240400 /* Second YUV Buffer */ -#define IVTV_YUV_BUFFER_OFFSET_2 0x002d8200 /* Third YUV Buffer */ -#define IVTV_YUV_BUFFER_OFFSET_3 0x00370000 /* Fourth YUV Buffer */ #define IVTV_YUV_BUFFER_UV_OFFSET 0x65400 /* Offset to UV Buffer */ /* Offset to filter table in firmware */ @@ -36,7 +31,7 @@ #define IVTV_YUV_UPDATE_VERTICAL 0x02 #define IVTV_YUV_UPDATE_INVALID 0x04 -extern const u32 yuv_offset[4]; +extern const u32 yuv_offset[IVTV_YUV_BUFFERS]; int ivtv_yuv_filter_check(struct ivtv *itv); int ivtv_yuv_prep_frame(struct ivtv *itv, struct ivtv_dma_frame *args); -- cgit v1.2.3-59-g8ed1b From 166983cdfbb2779bec98de89927669ed4c9ff8f2 Mon Sep 17 00:00:00 2001 From: Ian Armstrong Date: Sun, 21 Oct 2007 08:09:10 -0300 Subject: V4L/DVB (6714): ivtv: yuv frame parameter fix Inadvertently missed a line when converting code to new hardware buffering method. In some circumstances, this would lead to a frame being displayed using parameters belonging to another frame. Signed-off-by: Ian Armstrong Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c index fc8eac09584c..8c00d8f6d4d9 100644 --- a/drivers/media/video/ivtv/ivtv-irq.c +++ b/drivers/media/video/ivtv/ivtv-irq.c @@ -797,7 +797,7 @@ static void ivtv_irq_vsync(struct ivtv *itv) /* Check if we need to update the yuv registers */ if ((yi->yuv_forced_update || yi->new_frame_info[last_dma_frame].update) && last_dma_frame != -1) { if (!yi->new_frame_info[last_dma_frame].update) - last_dma_frame = (last_dma_frame - 1) & 3; + last_dma_frame = (u8)(last_dma_frame - 1) % IVTV_YUV_BUFFERS; if (yi->new_frame_info[last_dma_frame].src_w) { yi->update_frame = last_dma_frame; -- cgit v1.2.3-59-g8ed1b From 406c8b0ff0891ace87440bcb298a91c1927f9ae5 Mon Sep 17 00:00:00 2001 From: Ian Armstrong Date: Sun, 21 Oct 2007 08:33:59 -0300 Subject: V4L/DVB (6715): ivtv: Remove unnecessary register update To reduce the number of display register accesses, the yuv code keeps track of the current video settings. Should there be a change in any single parameter, it will update the associated display registers to ensure everything is displayed correctly. The existing check also looks at the field order for the video. This is not required, since field reversal does not require any display register changes. This patch removes the field order from the check. Signed-off-by: Ian Armstrong Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-yuv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/ivtv/ivtv-yuv.c b/drivers/media/video/ivtv/ivtv-yuv.c index 15e9bd2486d0..a23108fae4fd 100644 --- a/drivers/media/video/ivtv/ivtv-yuv.c +++ b/drivers/media/video/ivtv/ivtv-yuv.c @@ -1021,7 +1021,7 @@ void ivtv_yuv_setup_frame(struct ivtv *itv, struct ivtv_dma_frame *args) yi->new_frame_info[frame].update = 0; yi->new_frame_info[frame].interlaced_y = 0; yi->new_frame_info[frame].interlaced_uv = 0; - yi->new_frame_info[frame].lace_mode = yi->lace_mode; + yi->new_frame_info[frame].lace_mode = yi->lace_mode & IVTV_YUV_MODE_MASK; if (memcmp(&yi->old_frame_info_args, &yi->new_frame_info[frame], sizeof(yi->new_frame_info[frame]))) { -- cgit v1.2.3-59-g8ed1b From 3b5c1c8e71eb8fe2297a5884db59108e3c8b44c5 Mon Sep 17 00:00:00 2001 From: Ian Armstrong Date: Mon, 22 Oct 2007 14:24:26 -0300 Subject: V4L/DVB (6716): ivtv: yuv interlace mode change Interlace mode selection code moved into the frame setup phase, so it's now run before the frame is loaded into a hardware buffer. Given that it can affect how a new frame is displayed, it was a bit stupid running it after the frame was already visible. A few stray interlace related variables which were linked to individual frames have now been moved into the yuv_frame_info struct. This means that all variables linked to a specific frame are in the same place & not scattered. Minor code reformatting in areas touched by the above changes. Signed-off-by: Ian Armstrong Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-driver.h | 7 +- drivers/media/video/ivtv/ivtv-irq.c | 19 +- drivers/media/video/ivtv/ivtv-yuv.c | 382 ++++++++++++++++----------------- 3 files changed, 199 insertions(+), 209 deletions(-) diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h index 12ff9382718d..0e4ad29821e0 100644 --- a/drivers/media/video/ivtv/ivtv-driver.h +++ b/drivers/media/video/ivtv/ivtv-driver.h @@ -392,6 +392,9 @@ struct yuv_frame_info u32 tru_h; u32 offset_y; s32 lace_mode; + u32 sync_field; + u32 delay; + u32 interlaced; }; #define IVTV_YUV_MODE_INTERLACED 0x00 @@ -465,8 +468,6 @@ struct yuv_playback_info int decode_height; - int frame_interlaced; - int lace_mode; int lace_threshold; int lace_sync_field; @@ -477,8 +478,6 @@ struct yuv_playback_info u32 yuv_forced_update; int update_frame; - int sync_field[IVTV_YUV_BUFFERS]; /* Field to sync on */ - int field_delay[IVTV_YUV_BUFFERS]; /* Flag to extend duration of previous frame */ u8 fields_lapsed; /* Counter used when delaying a frame */ struct yuv_frame_info new_frame_info[IVTV_YUV_BUFFERS]; diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c index 8c00d8f6d4d9..dd0dd8d126de 100644 --- a/drivers/media/video/ivtv/ivtv-irq.c +++ b/drivers/media/video/ivtv/ivtv-irq.c @@ -746,15 +746,16 @@ static void ivtv_irq_vsync(struct ivtv *itv) unsigned int frame = read_reg(0x28c0) & 1; struct yuv_playback_info *yi = &itv->yuv_info; int last_dma_frame = atomic_read(&itv->yuv_info.next_dma_frame); + struct yuv_frame_info *f = &yi->new_frame_info[last_dma_frame]; if (0) IVTV_DEBUG_IRQ("DEC VSYNC\n"); - if (((frame ^ yi->sync_field[last_dma_frame]) == 0 && - ((itv->last_vsync_field & 1) ^ yi->sync_field[last_dma_frame])) || - (frame != (itv->last_vsync_field & 1) && !yi->frame_interlaced)) { + if (((frame ^ f->sync_field) == 0 && + ((itv->last_vsync_field & 1) ^ f->sync_field)) || + (frame != (itv->last_vsync_field & 1) && !f->interlaced)) { int next_dma_frame = last_dma_frame; - if (!(yi->frame_interlaced && yi->field_delay[next_dma_frame] && yi->fields_lapsed < 1)) { + if (!(f->interlaced && f->delay && yi->fields_lapsed < 1)) { if (next_dma_frame >= 0 && next_dma_frame != atomic_read(&yi->next_fill_frame)) { write_reg(yuv_offset[next_dma_frame] >> 4, 0x82c); write_reg((yuv_offset[next_dma_frame] + IVTV_YUV_BUFFER_UV_OFFSET) >> 4, 0x830); @@ -795,13 +796,15 @@ static void ivtv_irq_vsync(struct ivtv *itv) } /* Check if we need to update the yuv registers */ - if ((yi->yuv_forced_update || yi->new_frame_info[last_dma_frame].update) && last_dma_frame != -1) { - if (!yi->new_frame_info[last_dma_frame].update) + if ((yi->yuv_forced_update || f->update) && last_dma_frame != -1) { + if (!f->update) { last_dma_frame = (u8)(last_dma_frame - 1) % IVTV_YUV_BUFFERS; + f = &yi->new_frame_info[last_dma_frame]; + } - if (yi->new_frame_info[last_dma_frame].src_w) { + if (f->src_w) { yi->update_frame = last_dma_frame; - yi->new_frame_info[last_dma_frame].update = 0; + f->update = 0; yi->yuv_forced_update = 0; set_bit(IVTV_F_I_WORK_HANDLER_YUV, &itv->i_flags); set_bit(IVTV_F_I_HAVE_WORK, &itv->i_flags); diff --git a/drivers/media/video/ivtv/ivtv-yuv.c b/drivers/media/video/ivtv/ivtv-yuv.c index a23108fae4fd..cd42db9b5a15 100644 --- a/drivers/media/video/ivtv/ivtv-yuv.c +++ b/drivers/media/video/ivtv/ivtv-yuv.c @@ -39,19 +39,20 @@ static int ivtv_yuv_prep_user_dma(struct ivtv *itv, struct ivtv_user_dma *dma, { struct ivtv_dma_page_info y_dma; struct ivtv_dma_page_info uv_dma; - + struct yuv_playback_info *yi = &itv->yuv_info; + u8 frame = yi->draw_frame; + struct yuv_frame_info *f = &yi->new_frame_info[frame]; int i; int y_pages, uv_pages; - u8 frame = itv->yuv_info.draw_frame; unsigned long y_buffer_offset, uv_buffer_offset; int y_decode_height, uv_decode_height, y_size; y_buffer_offset = IVTV_DECODER_OFFSET + yuv_offset[frame]; uv_buffer_offset = y_buffer_offset + IVTV_YUV_BUFFER_UV_OFFSET; - y_decode_height = uv_decode_height = args->src.height + args->src.top; + y_decode_height = uv_decode_height = f->src_h + f->src_x; - if (y_decode_height < 512-16) + if (f->offset_y) y_buffer_offset += 720 * 16; if (y_decode_height & 15) @@ -106,13 +107,11 @@ static int ivtv_yuv_prep_user_dma(struct ivtv *itv, struct ivtv_user_dma *dma, ivtv_udma_fill_sg_array (dma, y_buffer_offset, uv_buffer_offset, y_size); /* If we've offset the y plane, ensure top area is blanked */ - if (args->src.height + args->src.top < 512-16) { - if (itv->yuv_info.blanking_dmaptr) { - dma->SGarray[dma->SG_length].size = cpu_to_le32(720*16); - dma->SGarray[dma->SG_length].src = cpu_to_le32(itv->yuv_info.blanking_dmaptr); - dma->SGarray[dma->SG_length].dst = cpu_to_le32(IVTV_DECODER_OFFSET + yuv_offset[frame]); - dma->SG_length++; - } + if (f->offset_y && itv->yuv_info.blanking_dmaptr) { + dma->SGarray[dma->SG_length].size = cpu_to_le32(720*16); + dma->SGarray[dma->SG_length].src = cpu_to_le32(itv->yuv_info.blanking_dmaptr); + dma->SGarray[dma->SG_length].dst = cpu_to_le32(IVTV_DECODER_OFFSET + yuv_offset[frame]); + dma->SG_length++; } /* Tag SG Array with Interrupt Bit */ @@ -387,7 +386,7 @@ static void ivtv_yuv_handle_vertical(struct ivtv *itv, struct yuv_frame_info *wi } /* What is the source video being treated as... */ - if (itv->yuv_info.frame_interlaced) { + if (window->interlaced) { IVTV_DEBUG_WARN("Source video: Interlaced\n"); } else { @@ -631,192 +630,142 @@ static void ivtv_yuv_handle_vertical(struct ivtv *itv, struct yuv_frame_info *wi } /* Modify the supplied coordinate information to fit the visible osd area */ -static u32 ivtv_yuv_window_setup (struct ivtv *itv, struct yuv_frame_info *window) +static u32 ivtv_yuv_window_setup(struct ivtv *itv, struct yuv_frame_info *f) { - int osd_crop, lace_threshold; + struct yuv_frame_info *of = &itv->yuv_info.old_frame_info; + int osd_crop; u32 osd_scale; u32 yuv_update = 0; - lace_threshold = itv->yuv_info.lace_threshold; - if (lace_threshold < 0) - lace_threshold = itv->yuv_info.decode_height - 1; - - /* Work out the lace settings */ - switch (itv->yuv_info.lace_mode) { - case IVTV_YUV_MODE_PROGRESSIVE: /* Progressive mode */ - itv->yuv_info.frame_interlaced = 0; - if (window->tru_h < 512 || (window->tru_h > 576 && window->tru_h < 1021)) - window->interlaced_y = 0; - else - window->interlaced_y = 1; - - if (window->tru_h < 1021 && (window->dst_h >= window->src_h /2)) - window->interlaced_uv = 0; - else - window->interlaced_uv = 1; - break; - - case IVTV_YUV_MODE_AUTO: - if (window->tru_h <= lace_threshold || window->tru_h > 576 || window->tru_w > 720){ - itv->yuv_info.frame_interlaced = 0; - if ((window->tru_h < 512) || - (window->tru_h > 576 && window->tru_h < 1021) || - (window->tru_w > 720 && window->tru_h < 1021)) - window->interlaced_y = 0; - else - window->interlaced_y = 1; - - if (window->tru_h < 1021 && (window->dst_h >= window->src_h /2)) - window->interlaced_uv = 0; - else - window->interlaced_uv = 1; - } - else { - itv->yuv_info.frame_interlaced = 1; - window->interlaced_y = 1; - window->interlaced_uv = 1; - } - break; - - case IVTV_YUV_MODE_INTERLACED: /* Interlace mode */ - default: - itv->yuv_info.frame_interlaced = 1; - window->interlaced_y = 1; - window->interlaced_uv = 1; - break; - } - /* Sorry, but no negative coords for src */ - if (window->src_x < 0) window->src_x = 0; - if (window->src_y < 0) window->src_y = 0; + if (f->src_x < 0) + f->src_x = 0; + if (f->src_y < 0) + f->src_y = 0; /* Can only reduce width down to 1/4 original size */ - if ((osd_crop = window->src_w - ( 4 * window->dst_w )) > 0) { - window->src_x += osd_crop / 2; - window->src_w = (window->src_w - osd_crop) & ~3; - window->dst_w = window->src_w / 4; - window->dst_w += window->dst_w & 1; + if ((osd_crop = f->src_w - 4 * f->dst_w) > 0) { + f->src_x += osd_crop / 2; + f->src_w = (f->src_w - osd_crop) & ~3; + f->dst_w = f->src_w / 4; + f->dst_w += f->dst_w & 1; } /* Can only reduce height down to 1/4 original size */ - if (window->src_h / window->dst_h >= 2) { - /* Overflow may be because we're running progressive, so force mode switch */ - window->interlaced_y = 1; + if (f->src_h / f->dst_h >= 2) { + /* Overflow may be because we're running progressive, + so force mode switch */ + f->interlaced_y = 1; /* Make sure we're still within limits for interlace */ - if ((osd_crop = window->src_h - ( 4 * window->dst_h )) > 0) { + if ((osd_crop = f->src_h - 4 * f->dst_h) > 0) { /* If we reach here we'll have to force the height. */ - window->src_y += osd_crop / 2; - window->src_h = (window->src_h - osd_crop) & ~3; - window->dst_h = window->src_h / 4; - window->dst_h += window->dst_h & 1; + f->src_y += osd_crop / 2; + f->src_h = (f->src_h - osd_crop) & ~3; + f->dst_h = f->src_h / 4; + f->dst_h += f->dst_h & 1; } } /* If there's nothing to safe to display, we may as well stop now */ - if ((int)window->dst_w <= 2 || (int)window->dst_h <= 2 || (int)window->src_w <= 2 || (int)window->src_h <= 2) { + if ((int)f->dst_w <= 2 || (int)f->dst_h <= 2 || + (int)f->src_w <= 2 || (int)f->src_h <= 2) { return IVTV_YUV_UPDATE_INVALID; } /* Ensure video remains inside OSD area */ - osd_scale = (window->src_h << 16) / window->dst_h; + osd_scale = (f->src_h << 16) / f->dst_h; - if ((osd_crop = window->pan_y - window->dst_y) > 0) { + if ((osd_crop = f->pan_y - f->dst_y) > 0) { /* Falls off the upper edge - crop */ - window->src_y += (osd_scale * osd_crop) >> 16; - window->src_h -= (osd_scale * osd_crop) >> 16; - window->dst_h -= osd_crop; - window->dst_y = 0; - } - else { - window->dst_y -= window->pan_y; + f->src_y += (osd_scale * osd_crop) >> 16; + f->src_h -= (osd_scale * osd_crop) >> 16; + f->dst_h -= osd_crop; + f->dst_y = 0; + } else { + f->dst_y -= f->pan_y; } - if ((osd_crop = window->dst_h + window->dst_y - window->vis_h) > 0) { + if ((osd_crop = f->dst_h + f->dst_y - f->vis_h) > 0) { /* Falls off the lower edge - crop */ - window->dst_h -= osd_crop; - window->src_h -= (osd_scale * osd_crop) >> 16; + f->dst_h -= osd_crop; + f->src_h -= (osd_scale * osd_crop) >> 16; } - osd_scale = (window->src_w << 16) / window->dst_w; + osd_scale = (f->src_w << 16) / f->dst_w; - if ((osd_crop = window->pan_x - window->dst_x) > 0) { + if ((osd_crop = f->pan_x - f->dst_x) > 0) { /* Fall off the left edge - crop */ - window->src_x += (osd_scale * osd_crop) >> 16; - window->src_w -= (osd_scale * osd_crop) >> 16; - window->dst_w -= osd_crop; - window->dst_x = 0; - } - else { - window->dst_x -= window->pan_x; + f->src_x += (osd_scale * osd_crop) >> 16; + f->src_w -= (osd_scale * osd_crop) >> 16; + f->dst_w -= osd_crop; + f->dst_x = 0; + } else { + f->dst_x -= f->pan_x; } - if ((osd_crop = window->dst_w + window->dst_x - window->vis_w) > 0) { + if ((osd_crop = f->dst_w + f->dst_x - f->vis_w) > 0) { /* Falls off the right edge - crop */ - window->dst_w -= osd_crop; - window->src_w -= (osd_scale * osd_crop) >> 16; + f->dst_w -= osd_crop; + f->src_w -= (osd_scale * osd_crop) >> 16; } /* The OSD can be moved. Track to it */ - window->dst_x += itv->yuv_info.osd_x_offset; - window->dst_y += itv->yuv_info.osd_y_offset; + f->dst_x += itv->yuv_info.osd_x_offset; + f->dst_y += itv->yuv_info.osd_y_offset; /* Width & height for both src & dst must be even. Same for coordinates. */ - window->dst_w &= ~1; - window->dst_x &= ~1; + f->dst_w &= ~1; + f->dst_x &= ~1; - window->src_w += window->src_x & 1; - window->src_x &= ~1; + f->src_w += f->src_x & 1; + f->src_x &= ~1; - window->src_w &= ~1; - window->dst_w &= ~1; + f->src_w &= ~1; + f->dst_w &= ~1; - window->dst_h &= ~1; - window->dst_y &= ~1; + f->dst_h &= ~1; + f->dst_y &= ~1; - window->src_h += window->src_y & 1; - window->src_y &= ~1; + f->src_h += f->src_y & 1; + f->src_y &= ~1; - window->src_h &= ~1; - window->dst_h &= ~1; + f->src_h &= ~1; + f->dst_h &= ~1; - /* Due to rounding, we may have reduced the output size to <1/4 of the source - Check again, but this time just resize. Don't change source coordinates */ - if (window->dst_w < window->src_w / 4) { - window->src_w &= ~3; - window->dst_w = window->src_w / 4; - window->dst_w += window->dst_w & 1; + /* Due to rounding, we may have reduced the output size to <1/4 of + the source. Check again, but this time just resize. Don't change + source coordinates */ + if (f->dst_w < f->src_w / 4) { + f->src_w &= ~3; + f->dst_w = f->src_w / 4; + f->dst_w += f->dst_w & 1; } - if (window->dst_h < window->src_h / 4) { - window->src_h &= ~3; - window->dst_h = window->src_h / 4; - window->dst_h += window->dst_h & 1; + if (f->dst_h < f->src_h / 4) { + f->src_h &= ~3; + f->dst_h = f->src_h / 4; + f->dst_h += f->dst_h & 1; } /* Check again. If there's nothing to safe to display, stop now */ - if ((int)window->dst_w <= 2 || (int)window->dst_h <= 2 || (int)window->src_w <= 2 || (int)window->src_h <= 2) { + if ((int)f->dst_w <= 2 || (int)f->dst_h <= 2 || + (int)f->src_w <= 2 || (int)f->src_h <= 2) { return IVTV_YUV_UPDATE_INVALID; } /* Both x offset & width are linked, so they have to be done together */ - if ((itv->yuv_info.old_frame_info.dst_w != window->dst_w) || - (itv->yuv_info.old_frame_info.src_w != window->src_w) || - (itv->yuv_info.old_frame_info.dst_x != window->dst_x) || - (itv->yuv_info.old_frame_info.src_x != window->src_x) || - (itv->yuv_info.old_frame_info.pan_x != window->pan_x) || - (itv->yuv_info.old_frame_info.vis_w != window->vis_w)) { + if ((of->dst_w != f->dst_w) || (of->src_w != f->src_w) || + (of->dst_x != f->dst_x) || (of->src_x != f->src_x) || + (of->pan_x != f->pan_x) || (of->vis_w != f->vis_w)) { yuv_update |= IVTV_YUV_UPDATE_HORIZONTAL; } - if ((itv->yuv_info.old_frame_info.src_h != window->src_h) || - (itv->yuv_info.old_frame_info.dst_h != window->dst_h) || - (itv->yuv_info.old_frame_info.dst_y != window->dst_y) || - (itv->yuv_info.old_frame_info.src_y != window->src_y) || - (itv->yuv_info.old_frame_info.pan_y != window->pan_y) || - (itv->yuv_info.old_frame_info.vis_h != window->vis_h) || - (itv->yuv_info.old_frame_info.lace_mode != window->lace_mode) || - (itv->yuv_info.old_frame_info.interlaced_y != window->interlaced_y) || - (itv->yuv_info.old_frame_info.interlaced_uv != window->interlaced_uv)) { + if ((of->src_h != f->src_h) || (of->dst_h != f->dst_h) || + (of->dst_y != f->dst_y) || (of->src_y != f->src_y) || + (of->pan_y != f->pan_y) || (of->vis_h != f->vis_h) || + (of->lace_mode != f->lace_mode) || + (of->interlaced_y != f->interlaced_y) || + (of->interlaced_uv != f->interlaced_uv)) { yuv_update |= IVTV_YUV_UPDATE_VERTICAL; } @@ -826,22 +775,22 @@ static u32 ivtv_yuv_window_setup (struct ivtv *itv, struct yuv_frame_info *windo /* Update the scaling register to the requested value */ void ivtv_yuv_work_handler (struct ivtv *itv) { - struct yuv_frame_info window; + struct yuv_playback_info *yi = &itv->yuv_info; + struct yuv_frame_info f; + int frame = yi->update_frame; u32 yuv_update; - int frame = itv->yuv_info.update_frame; - /* IVTV_DEBUG_YUV("Update yuv registers for frame %d\n",frame); */ - memcpy(&window, &itv->yuv_info.new_frame_info[frame], sizeof (window)); + f = yi->new_frame_info[frame]; /* Update the osd pan info */ - window.pan_x = itv->yuv_info.osd_x_pan; - window.pan_y = itv->yuv_info.osd_y_pan; - window.vis_w = itv->yuv_info.osd_vis_w; - window.vis_h = itv->yuv_info.osd_vis_h; + f.pan_x = itv->yuv_info.osd_x_pan; + f.pan_y = itv->yuv_info.osd_y_pan; + f.vis_w = itv->yuv_info.osd_vis_w; + f.vis_h = itv->yuv_info.osd_vis_h; /* Calculate the display window coordinates. Exit if nothing left */ - if (!(yuv_update = ivtv_yuv_window_setup (itv, &window))) + if (!(yuv_update = ivtv_yuv_window_setup (itv, &f))) return; if (yuv_update & IVTV_YUV_UPDATE_INVALID) { @@ -850,13 +799,12 @@ void ivtv_yuv_work_handler (struct ivtv *itv) write_reg(0x00108080, 0x2898); if (yuv_update & IVTV_YUV_UPDATE_HORIZONTAL) - ivtv_yuv_handle_horizontal(itv, &window); + ivtv_yuv_handle_horizontal(itv, &f); if (yuv_update & IVTV_YUV_UPDATE_VERTICAL) - ivtv_yuv_handle_vertical(itv, &window); + ivtv_yuv_handle_vertical(itv, &f); } - - memcpy(&itv->yuv_info.old_frame_info, &window, sizeof (itv->yuv_info.old_frame_info)); + yi->old_frame_info = f; } static void ivtv_yuv_init (struct ivtv *itv) @@ -986,58 +934,98 @@ void ivtv_yuv_setup_frame(struct ivtv *itv, struct ivtv_dma_frame *args) { struct yuv_playback_info *yi = &itv->yuv_info; u8 frame = yi->draw_frame; + u8 last_frame = (u8)(frame - 1) % IVTV_YUV_BUFFERS; + struct yuv_frame_info *nf = &yi->new_frame_info[frame]; + struct yuv_frame_info *of = &yi->new_frame_info[last_frame]; + int lace_threshold = yi->lace_threshold; /* Preserve old update flag in case we're overwriting a queued frame */ - int register_update = yi->new_frame_info[frame].update; + int update = nf->update; /* Take a snapshot of the yuv coordinate information */ - yi->new_frame_info[frame].src_x = args->src.left; - yi->new_frame_info[frame].src_y = args->src.top; - yi->new_frame_info[frame].src_w = args->src.width; - yi->new_frame_info[frame].src_h = args->src.height; - yi->new_frame_info[frame].dst_x = args->dst.left; - yi->new_frame_info[frame].dst_y = args->dst.top; - yi->new_frame_info[frame].dst_w = args->dst.width; - yi->new_frame_info[frame].dst_h = args->dst.height; - yi->new_frame_info[frame].tru_x = args->dst.left; - yi->new_frame_info[frame].tru_w = args->src_width; - yi->new_frame_info[frame].tru_h = args->src_height; - - /* Snapshot field order */ - yi->sync_field[frame] = yi->lace_sync_field; + nf->src_x = args->src.left; + nf->src_y = args->src.top; + nf->src_w = args->src.width; + nf->src_h = args->src.height; + nf->dst_x = args->dst.left; + nf->dst_y = args->dst.top; + nf->dst_w = args->dst.width; + nf->dst_h = args->dst.height; + nf->tru_x = args->dst.left; + nf->tru_w = args->src_width; + nf->tru_h = args->src_height; /* Are we going to offset the Y plane */ - if (args->src.height + args->src.top < 512-16) - yi->new_frame_info[frame].offset_y = 1; - else - yi->new_frame_info[frame].offset_y = 0; + nf->offset_y = (nf->tru_h + nf->src_x < 512 - 16) ? 1 : 0; /* Snapshot the osd pan info */ - yi->new_frame_info[frame].pan_x = yi->osd_x_pan; - yi->new_frame_info[frame].pan_y = yi->osd_y_pan; - yi->new_frame_info[frame].vis_w = yi->osd_vis_w; - yi->new_frame_info[frame].vis_h = yi->osd_vis_h; - - yi->new_frame_info[frame].update = 0; - yi->new_frame_info[frame].interlaced_y = 0; - yi->new_frame_info[frame].interlaced_uv = 0; - yi->new_frame_info[frame].lace_mode = yi->lace_mode & IVTV_YUV_MODE_MASK; - - if (memcmp(&yi->old_frame_info_args, &yi->new_frame_info[frame], - sizeof(yi->new_frame_info[frame]))) { - yi->old_frame_info_args = yi->new_frame_info[frame]; - yi->new_frame_info[frame].update = 1; -/* IVTV_DEBUG_YUV ("Requesting register update for frame %d\n",frame); */ + nf->pan_x = yi->osd_x_pan; + nf->pan_y = yi->osd_y_pan; + nf->vis_w = yi->osd_vis_w; + nf->vis_h = yi->osd_vis_h; + + nf->update = 0; + nf->interlaced_y = 0; + nf->interlaced_uv = 0; + nf->delay = 0; + nf->sync_field = 0; + nf->lace_mode = yi->lace_mode & IVTV_YUV_MODE_MASK; + + if (lace_threshold < 0) + lace_threshold = yi->decode_height - 1; + + /* Work out the lace settings */ + switch (nf->lace_mode) { + case IVTV_YUV_MODE_PROGRESSIVE: /* Progressive mode */ + nf->interlaced = 0; + if (nf->tru_h < 512 || (nf->tru_h > 576 && nf->tru_h < 1021)) + nf->interlaced_y = 0; + else + nf->interlaced_y = 1; + + if (nf->tru_h < 1021 && (nf->dst_h >= nf->src_h / 2)) + nf->interlaced_uv = 0; + else + nf->interlaced_uv = 1; + break; + + case IVTV_YUV_MODE_AUTO: + if (nf->tru_h <= lace_threshold || nf->tru_h > 576 || nf->tru_w > 720) { + nf->interlaced = 0; + if ((nf->tru_h < 512) || + (nf->tru_h > 576 && nf->tru_h < 1021) || + (nf->tru_w > 720 && nf->tru_h < 1021)) + nf->interlaced_y = 0; + else + nf->interlaced_y = 1; + if (nf->tru_h < 1021 && (nf->dst_h >= nf->src_h / 2)) + nf->interlaced_uv = 0; + else + nf->interlaced_uv = 1; + } else { + nf->interlaced = 1; + nf->interlaced_y = 1; + nf->interlaced_uv = 1; + } + break; + + case IVTV_YUV_MODE_INTERLACED: /* Interlace mode */ + default: + nf->interlaced = 1; + nf->interlaced_y = 1; + nf->interlaced_uv = 1; + break; } - yi->new_frame_info[frame].update |= register_update; + if (memcmp(&yi->old_frame_info_args, nf, sizeof(*nf))) { + yi->old_frame_info_args = *nf; + nf->update = 1; +/* IVTV_DEBUG_YUV ("Requesting register update for frame %d\n",frame); */ + } - /* Should this frame be delayed ? */ - if (yi->sync_field[frame] != - yi->sync_field[(frame - 1) % IVTV_YUV_BUFFERS]) - yi->field_delay[frame] = 1; - else - yi->field_delay[frame] = 0; + nf->update |= update; + nf->sync_field = yi->lace_sync_field; + nf->delay = nf->sync_field != of->sync_field; } /* Frame is complete & ready for display */ -- cgit v1.2.3-59-g8ed1b From 77aded6ba51f01335840ce8e18b413067810b68e Mon Sep 17 00:00:00 2001 From: Ian Armstrong Date: Mon, 5 Nov 2007 14:27:09 -0300 Subject: V4L/DVB (6717): ivtv: Initial merge of video48 yuv handling into the IVTV_IOC_DMA_FRAME framework Previously, all yuv data written to /dev/video48 had only basic support with no double buffering to avoid display tearing. With this patch, yuv frames written to video48 are now handled by the existing IVTV_IOC_DMA_FRAME framework. As such, the frames are hardware buffered to avoid tearing, and honour scaling mode & field order options. Unlike the proprietary IVTV_IOC_DMA_FRAME ioctl, all parameters are controlled by the V4L2 API. Due to mpeg & yuv output restrictions being different, their V4L2 output controls have been separated. To control the yuv output, the V4L2 calls must be done via video48. If the ivtvfb module is loaded, there will be one side effect to this merge. The yuv output window will be constrained to the visible framebuffer area. In the event that a virtual framebuffer size is being used, the limit to the output size will be the virtual dimensions, but only the portion that falls within the currently visible area of the framebuffer will be shown. Like the IVTV_IOC_DMA_FRAME ioctl, the supplied frames must be padded to 720 pixels wide. However the height must only be padded up the nearest multiple of 32. This would mean an image of 102 lines must be padded to 128. As long as the true source image size is given, the padding will not be visible in the final output. Signed-off-by: Ian Armstrong Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-driver.c | 6 ++ drivers/media/video/ivtv/ivtv-driver.h | 7 ++ drivers/media/video/ivtv/ivtv-fileops.c | 23 +++++- drivers/media/video/ivtv/ivtv-ioctl.c | 120 +++++++++++++++++++++----------- drivers/media/video/ivtv/ivtv-irq.c | 26 ++++++- drivers/media/video/ivtv/ivtv-streams.c | 17 +---- drivers/media/video/ivtv/ivtv-yuv.c | 58 +++++++++++++-- drivers/media/video/ivtv/ivtv-yuv.h | 5 +- drivers/media/video/ivtv/ivtvfb.c | 4 ++ 9 files changed, 196 insertions(+), 70 deletions(-) diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index e3020f456641..7c600d0f48cd 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -1117,6 +1117,12 @@ static int __devinit ivtv_probe(struct pci_dev *dev, itv->is_50hz = 1; itv->is_out_50hz = 1; } + + itv->yuv_info.osd_full_w = 720; + itv->yuv_info.osd_full_h = itv->is_out_50hz ? 576 : 480; + itv->yuv_info.v4l2_src_w = itv->yuv_info.osd_full_w; + itv->yuv_info.v4l2_src_h = itv->yuv_info.osd_full_h; + itv->params.video_gop_size = itv->is_60hz ? 15 : 12; itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_MPG] = 0x08000; diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h index 0e4ad29821e0..19a9b3bac190 100644 --- a/drivers/media/video/ivtv/ivtv-driver.h +++ b/drivers/media/video/ivtv/ivtv-driver.h @@ -466,6 +466,9 @@ struct yuv_playback_info u32 osd_vis_w; u32 osd_vis_h; + u32 osd_full_w; + u32 osd_full_h; + int decode_height; int lace_mode; @@ -491,6 +494,10 @@ struct yuv_playback_info u8 draw_frame; /* PVR350 buffer to draw into */ u8 max_frames_buffered; /* Maximum number of frames to buffer */ + + struct v4l2_rect main_rect; + u32 v4l2_src_w; + u32 v4l2_src_h; }; #define IVTV_VBI_FRAMES 32 diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c index 58ad0d9c680a..6fb96f19a866 100644 --- a/drivers/media/video/ivtv/ivtv-fileops.c +++ b/drivers/media/video/ivtv/ivtv-fileops.c @@ -581,6 +581,24 @@ ssize_t ivtv_v4l2_write(struct file *filp, const char __user *user_buf, size_t c set_bit(IVTV_F_S_APPL_IO, &s->s_flags); retry: + /* If possible, just DMA the entire frame - Check the data transfer size + since we may get here before the stream has been fully set-up */ + if (mode == OUT_YUV && s->q_full.length == 0 && itv->dma_data_req_size) { + while (count >= itv->dma_data_req_size) { + if (!ivtv_yuv_udma_stream_frame (itv, (void *)user_buf)) { + bytes_written += itv->dma_data_req_size; + user_buf += itv->dma_data_req_size; + count -= itv->dma_data_req_size; + } else { + break; + } + } + if (count == 0) { + IVTV_DEBUG_HI_FILE("Wrote %d bytes to %s (%d)\n", bytes_written, s->name, s->q_full.bytesused); + return bytes_written; + } + } + for (;;) { /* Gather buffers */ while (q.length - q.bytesused < count && (buf = ivtv_dequeue(s, &s->q_io))) @@ -660,6 +678,9 @@ retry: if (s->q_full.length >= itv->dma_data_req_size) { int got_sig; + if (mode == OUT_YUV) + ivtv_yuv_setup_stream_frame(itv); + prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE); while (!(got_sig = signal_pending(current)) && test_bit(IVTV_F_S_DMA_PENDING, &s->s_flags)) { @@ -946,7 +967,7 @@ static int ivtv_serialized_open(struct ivtv_stream *s, struct file *filp) set_bit(IVTV_F_I_DEC_YUV, &itv->i_flags); /* For yuv, we need to know the dma size before we start */ itv->dma_data_req_size = - itv->params.width * itv->params.height * 3 / 2; + 1080 * ((itv->yuv_info.v4l2_src_h + 31) & ~31); itv->yuv_info.stream_size = 0; } return 0; diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index fd6826f472e3..57eb8dfe53fa 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -372,7 +372,7 @@ static int ivtv_get_fmt(struct ivtv *itv, int streamtype, struct v4l2_format *fm fmt->fmt.pix.height = itv->main_rect.height; fmt->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; fmt->fmt.pix.field = V4L2_FIELD_INTERLACED; - if (itv->output_mode == OUT_UDMA_YUV) { + if (streamtype == IVTV_DEC_STREAM_TYPE_YUV) { switch (itv->yuv_info.lace_mode & IVTV_YUV_MODE_MASK) { case IVTV_YUV_MODE_INTERLACED: fmt->fmt.pix.field = (itv->yuv_info.lace_mode & IVTV_YUV_SYNC_MASK) ? @@ -386,14 +386,13 @@ static int ivtv_get_fmt(struct ivtv *itv, int streamtype, struct v4l2_format *fm break; } fmt->fmt.pix.pixelformat = V4L2_PIX_FMT_HM12; + fmt->fmt.pix.bytesperline = 720; + fmt->fmt.pix.width = itv->yuv_info.v4l2_src_w; + fmt->fmt.pix.height = itv->yuv_info.v4l2_src_h; /* YUV size is (Y=(h*w) + UV=(h*(w/2))) */ fmt->fmt.pix.sizeimage = - fmt->fmt.pix.height * fmt->fmt.pix.width + - fmt->fmt.pix.height * (fmt->fmt.pix.width / 2); - } - else if (itv->output_mode == OUT_YUV || - streamtype == IVTV_ENC_STREAM_TYPE_YUV || - streamtype == IVTV_DEC_STREAM_TYPE_YUV) { + 1080 * ((fmt->fmt.pix.height + 31) & ~31); + } else if (streamtype == IVTV_ENC_STREAM_TYPE_YUV) { fmt->fmt.pix.pixelformat = V4L2_PIX_FMT_HM12; /* YUV size is (Y=(h*w) + UV=(h*(w/2))) */ fmt->fmt.pix.sizeimage = @@ -490,6 +489,7 @@ static int ivtv_get_fmt(struct ivtv *itv, int streamtype, struct v4l2_format *fm static int ivtv_try_or_set_fmt(struct ivtv *itv, int streamtype, struct v4l2_format *fmt, int set_fmt) { + struct yuv_playback_info *yi = &itv->yuv_info; struct v4l2_sliced_vbi_format *vbifmt = &fmt->fmt.sliced; u16 set; @@ -505,39 +505,52 @@ static int ivtv_try_or_set_fmt(struct ivtv *itv, int streamtype, r.width = fmt->fmt.pix.width; r.height = fmt->fmt.pix.height; ivtv_get_fmt(itv, streamtype, fmt); - if (itv->output_mode != OUT_UDMA_YUV) { - /* TODO: would setting the rect also be valid for this mode? */ - fmt->fmt.pix.width = r.width; - fmt->fmt.pix.height = r.height; - } - if (itv->output_mode == OUT_UDMA_YUV) { - /* TODO: add checks for validity */ + fmt->fmt.pix.width = r.width; + fmt->fmt.pix.height = r.height; + if (streamtype == IVTV_DEC_STREAM_TYPE_YUV) { fmt->fmt.pix.field = field; + if (fmt->fmt.pix.width < 2) + fmt->fmt.pix.width = 2; + if (fmt->fmt.pix.width > 720) + fmt->fmt.pix.width = 720; + if (fmt->fmt.pix.height < 2) + fmt->fmt.pix.height = 2; + if (fmt->fmt.pix.height > 576) + fmt->fmt.pix.height = 576; } - if (set_fmt) { - if (itv->output_mode == OUT_UDMA_YUV) { - switch (field) { - case V4L2_FIELD_NONE: - itv->yuv_info.lace_mode = IVTV_YUV_MODE_PROGRESSIVE; - break; - case V4L2_FIELD_ANY: - itv->yuv_info.lace_mode = IVTV_YUV_MODE_AUTO; - break; - case V4L2_FIELD_INTERLACED_BT: - itv->yuv_info.lace_mode = - IVTV_YUV_MODE_INTERLACED|IVTV_YUV_SYNC_ODD; - break; - case V4L2_FIELD_INTERLACED_TB: - default: - itv->yuv_info.lace_mode = IVTV_YUV_MODE_INTERLACED; - break; - } - itv->yuv_info.lace_sync_field = (itv->yuv_info.lace_mode & IVTV_YUV_SYNC_MASK) == IVTV_YUV_SYNC_EVEN ? 0 : 1; + if (set_fmt && streamtype == IVTV_DEC_STREAM_TYPE_YUV) { + /* Return now if we already have some frame data */ + if (yi->stream_size) + return -EBUSY; - /* Force update of yuv registers */ - itv->yuv_info.yuv_forced_update = 1; - return 0; + yi->v4l2_src_w = r.width; + yi->v4l2_src_h = r.height; + + switch (field) { + case V4L2_FIELD_NONE: + yi->lace_mode = IVTV_YUV_MODE_PROGRESSIVE; + break; + case V4L2_FIELD_ANY: + yi->lace_mode = IVTV_YUV_MODE_AUTO; + break; + case V4L2_FIELD_INTERLACED_BT: + yi->lace_mode = + IVTV_YUV_MODE_INTERLACED|IVTV_YUV_SYNC_ODD; + break; + case V4L2_FIELD_INTERLACED_TB: + default: + yi->lace_mode = IVTV_YUV_MODE_INTERLACED; + break; } + yi->lace_sync_field = (yi->lace_mode & IVTV_YUV_SYNC_MASK) == IVTV_YUV_SYNC_EVEN ? 0 : 1; + + if (test_bit(IVTV_F_I_DEC_YUV, &itv->i_flags)) + itv->dma_data_req_size = + 1080 * ((yi->v4l2_src_h + 31) & ~31); + + /* Force update of yuv registers */ + yi->yuv_forced_update = 1; + return 0; } return 0; } @@ -703,8 +716,12 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void { struct ivtv_open_id *id = NULL; u32 data[CX2341X_MBOX_MAX_DATA]; + int streamtype = 0; - if (filp) id = (struct ivtv_open_id *)filp->private_data; + if (filp) { + id = (struct ivtv_open_id *)filp->private_data; + streamtype = id->type; + } switch (cmd) { case VIDIOC_G_PRIORITY: @@ -822,6 +839,11 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void cropcap->bounds.height = itv->is_50hz ? 576 : 480; cropcap->pixelaspect.numerator = itv->is_50hz ? 59 : 10; cropcap->pixelaspect.denominator = itv->is_50hz ? 54 : 11; + } else if (streamtype == IVTV_DEC_STREAM_TYPE_YUV) { + cropcap->bounds.width = itv->yuv_info.osd_full_w; + cropcap->bounds.height = itv->yuv_info.osd_full_h; + cropcap->pixelaspect.numerator = itv->is_out_50hz ? 59 : 10; + cropcap->pixelaspect.denominator = itv->is_out_50hz ? 54 : 11; } else { cropcap->bounds.height = itv->is_out_50hz ? 576 : 480; cropcap->pixelaspect.numerator = itv->is_out_50hz ? 59 : 10; @@ -836,10 +858,15 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void if (crop->type == V4L2_BUF_TYPE_VIDEO_OUTPUT && (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) { - if (!ivtv_vapi(itv, CX2341X_OSD_SET_FRAMEBUFFER_WINDOW, 4, - crop->c.width, crop->c.height, crop->c.left, crop->c.top)) { - itv->main_rect = crop->c; + if (streamtype == IVTV_DEC_STREAM_TYPE_YUV) { + itv->yuv_info.main_rect = crop->c; return 0; + } else { + if (!ivtv_vapi(itv, CX2341X_OSD_SET_FRAMEBUFFER_WINDOW, 4, + crop->c.width, crop->c.height, crop->c.left, crop->c.top)) { + itv->main_rect = crop->c; + return 0; + } } return -EINVAL; } @@ -853,7 +880,10 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void if (crop->type == V4L2_BUF_TYPE_VIDEO_OUTPUT && (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) { - crop->c = itv->main_rect; + if (streamtype == IVTV_DEC_STREAM_TYPE_YUV) + crop->c = itv->yuv_info.main_rect; + else + crop->c = itv->main_rect; return 0; } if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) @@ -864,7 +894,7 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void case VIDIOC_ENUM_FMT: { static struct v4l2_fmtdesc formats[] = { { 0, 0, 0, - "HM12 (YUV 4:1:1)", V4L2_PIX_FMT_HM12, + "HM12 (YUV 4:2:2)", V4L2_PIX_FMT_HM12, { 0, 0, 0, 0 } }, { 1, 0, V4L2_FMT_FLAG_COMPRESSED, @@ -1043,6 +1073,12 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void itv->main_rect.height = itv->params.height; ivtv_vapi(itv, CX2341X_OSD_SET_FRAMEBUFFER_WINDOW, 4, 720, itv->main_rect.height, 0, 0); + itv->yuv_info.main_rect = itv->main_rect; + if (!itv->osd_info) { + itv->yuv_info.osd_full_w = 720; + itv->yuv_info.osd_full_h = + itv->is_out_50hz ? 576 : 480; + } } break; } diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c index dd0dd8d126de..ebc200320e6f 100644 --- a/drivers/media/video/ivtv/ivtv-irq.c +++ b/drivers/media/video/ivtv/ivtv-irq.c @@ -302,8 +302,11 @@ static void dma_post(struct ivtv_stream *s) void ivtv_dma_stream_dec_prepare(struct ivtv_stream *s, u32 offset, int lock) { struct ivtv *itv = s->itv; + struct yuv_playback_info *yi = &itv->yuv_info; + u8 frame = yi->draw_frame; + struct yuv_frame_info *f = &yi->new_frame_info[frame]; struct ivtv_buffer *buf; - u32 y_size = itv->params.height * itv->params.width; + u32 y_size = 720 * ((f->src_h + 31) & ~31); u32 uv_offset = offset + IVTV_YUV_BUFFER_UV_OFFSET; int y_done = 0; int bytes_written = 0; @@ -311,6 +314,18 @@ void ivtv_dma_stream_dec_prepare(struct ivtv_stream *s, u32 offset, int lock) int idx = 0; IVTV_DEBUG_HI_DMA("DEC PREPARE DMA %s: %08x %08x\n", s->name, s->q_predma.bytesused, offset); + + /* Insert buffer block for YUV if needed */ + if (s->type == IVTV_DEC_STREAM_TYPE_YUV && f->offset_y) { + if (yi->blanking_dmaptr) { + s->sg_pending[idx].src = yi->blanking_dmaptr; + s->sg_pending[idx].dst = offset; + s->sg_pending[idx].size = 720 * 16; + } + offset += 720 * 16; + idx++; + } + list_for_each_entry(buf, &s->q_predma.list, list) { /* YUV UV Offset from Y Buffer */ if (s->type == IVTV_DEC_STREAM_TYPE_YUV && !y_done && @@ -713,8 +728,11 @@ static void ivtv_irq_dec_data_req(struct ivtv *itv) ivtv_api_get_data(&itv->dec_mbox, IVTV_MBOX_DMA, data); if (test_bit(IVTV_F_I_DEC_YUV, &itv->i_flags)) { - itv->dma_data_req_size = itv->params.width * itv->params.height * 3 / 2; - itv->dma_data_req_offset = data[1] ? data[1] : yuv_offset[0]; + itv->dma_data_req_size = + 1080 * ((itv->yuv_info.v4l2_src_h + 31) & ~31); + itv->dma_data_req_offset = data[1]; + if (atomic_read(&itv->yuv_info.next_dma_frame) >= 0) + ivtv_yuv_frame_complete(itv); s = &itv->streams[IVTV_DEC_STREAM_TYPE_YUV]; } else { @@ -728,6 +746,8 @@ static void ivtv_irq_dec_data_req(struct ivtv *itv) set_bit(IVTV_F_S_NEEDS_DATA, &s->s_flags); } else { + if (test_bit(IVTV_F_I_DEC_YUV, &itv->i_flags)) + ivtv_yuv_setup_stream_frame(itv); clear_bit(IVTV_F_S_NEEDS_DATA, &s->s_flags); ivtv_queue_move(s, &s->q_full, NULL, &s->q_predma, itv->dma_data_req_size); ivtv_dma_stream_dec_prepare(s, itv->dma_data_req_offset + IVTV_DECODER_OFFSET, 0); diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c index a5bfbd98a490..3ca2a1a62a71 100644 --- a/drivers/media/video/ivtv/ivtv-streams.c +++ b/drivers/media/video/ivtv/ivtv-streams.c @@ -661,27 +661,12 @@ int ivtv_start_v4l2_decode_stream(struct ivtv_stream *s, int gop_offset) IVTV_DEBUG_INFO("Starting decode stream %s (gop_offset %d)\n", s->name, gop_offset); - /* Clear Streamoff */ - if (s->type == IVTV_DEC_STREAM_TYPE_YUV) { - /* Initialize Decoder */ - /* Reprogram Decoder YUV Buffers for YUV */ - write_reg(yuv_offset[0] >> 4, 0x82c); - write_reg((yuv_offset[0] + IVTV_YUV_BUFFER_UV_OFFSET) >> 4, 0x830); - write_reg(yuv_offset[0] >> 4, 0x834); - write_reg((yuv_offset[0] + IVTV_YUV_BUFFER_UV_OFFSET) >> 4, 0x838); - - write_reg_sync(0x00000000 | (0x0c << 16) | (0x0b << 8), 0x2d24); - - write_reg_sync(0x00108080, 0x2898); - /* Enable YUV decoder output */ - write_reg_sync(0x01, IVTV_REG_VDM); - } - ivtv_setup_v4l2_decode_stream(s); /* set dma size to 65536 bytes */ ivtv_vapi(itv, CX2341X_DEC_SET_DMA_BLOCK_SIZE, 1, 65536); + /* Clear Streamoff */ clear_bit(IVTV_F_S_STREAMOFF, &s->s_flags); /* Zero out decoder counters */ diff --git a/drivers/media/video/ivtv/ivtv-yuv.c b/drivers/media/video/ivtv/ivtv-yuv.c index cd42db9b5a15..711ce5b5a20f 100644 --- a/drivers/media/video/ivtv/ivtv-yuv.c +++ b/drivers/media/video/ivtv/ivtv-yuv.c @@ -1035,17 +1035,11 @@ void ivtv_yuv_frame_complete(struct ivtv *itv) (itv->yuv_info.draw_frame + 1) % IVTV_YUV_BUFFERS); } -int ivtv_yuv_prep_frame(struct ivtv *itv, struct ivtv_dma_frame *args) +int ivtv_yuv_udma_frame(struct ivtv *itv, struct ivtv_dma_frame *args) { DEFINE_WAIT(wait); int rc = 0; int got_sig = 0; - - IVTV_DEBUG_INFO("yuv_prep_frame\n"); - - ivtv_yuv_next_free(itv); - ivtv_yuv_setup_frame(itv, args); - /* DMA the frame */ mutex_lock(&itv->udma.lock); @@ -1084,6 +1078,56 @@ int ivtv_yuv_prep_frame(struct ivtv *itv, struct ivtv_dma_frame *args) return rc; } +/* Setup frame according to V4L2 parameters */ +void ivtv_yuv_setup_stream_frame(struct ivtv *itv) +{ + struct yuv_playback_info *yi = &itv->yuv_info; + struct ivtv_dma_frame dma_args; + + ivtv_yuv_next_free(itv); + + /* Copy V4L2 parameters to an ivtv_dma_frame struct... */ + dma_args.y_source = 0L; + dma_args.uv_source = 0L; + dma_args.src.left = 0; + dma_args.src.top = 0; + dma_args.src.width = yi->v4l2_src_w; + dma_args.src.height = yi->v4l2_src_h; + dma_args.dst = yi->main_rect; + dma_args.src_width = yi->v4l2_src_w; + dma_args.src_height = yi->v4l2_src_h; + + /* ... and use the same setup routine as ivtv_yuv_prep_frame */ + ivtv_yuv_setup_frame(itv, &dma_args); + + if (!itv->dma_data_req_offset) + itv->dma_data_req_offset = yuv_offset[yi->draw_frame]; +} + +/* Attempt to dma a frame from a user buffer */ +int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void *src) +{ + struct yuv_playback_info *yi = &itv->yuv_info; + struct ivtv_dma_frame dma_args; + + ivtv_yuv_setup_stream_frame(itv); + + /* We only need to supply source addresses for this */ + dma_args.y_source = src; + dma_args.uv_source = src + 720 * ((yi->v4l2_src_h + 31) & ~31); + return ivtv_yuv_udma_frame(itv, &dma_args); +} + +/* IVTV_IOC_DMA_FRAME ioctl handler */ +int ivtv_yuv_prep_frame(struct ivtv *itv, struct ivtv_dma_frame *args) +{ + IVTV_DEBUG_INFO("yuv_prep_frame\n"); + + ivtv_yuv_next_free(itv); + ivtv_yuv_setup_frame(itv, args); + return ivtv_yuv_udma_frame(itv, args); +} + void ivtv_yuv_close(struct ivtv *itv) { int h_filter, v_filter_1, v_filter_2; diff --git a/drivers/media/video/ivtv/ivtv-yuv.h b/drivers/media/video/ivtv/ivtv-yuv.h index 3b290927d367..2fe5f1250762 100644 --- a/drivers/media/video/ivtv/ivtv-yuv.h +++ b/drivers/media/video/ivtv/ivtv-yuv.h @@ -34,8 +34,11 @@ extern const u32 yuv_offset[IVTV_YUV_BUFFERS]; int ivtv_yuv_filter_check(struct ivtv *itv); +void ivtv_yuv_setup_stream_frame(struct ivtv *itv); +int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void *src); +void ivtv_yuv_frame_complete(struct ivtv *itv); int ivtv_yuv_prep_frame(struct ivtv *itv, struct ivtv_dma_frame *args); void ivtv_yuv_close(struct ivtv *itv); -void ivtv_yuv_work_handler (struct ivtv *itv); +void ivtv_yuv_work_handler(struct ivtv *itv); #endif diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c index 52ffd154a3d8..1a73038ea811 100644 --- a/drivers/media/video/ivtv/ivtvfb.c +++ b/drivers/media/video/ivtv/ivtvfb.c @@ -504,6 +504,10 @@ static int ivtvfb_set_var(struct ivtv *itv, struct fb_var_screeninfo *var) ivtvfb_set_display_window(itv, &ivtv_window); + /* Pass screen size back to yuv handler */ + itv->yuv_info.osd_full_w = ivtv_osd.pixel_stride; + itv->yuv_info.osd_full_h = ivtv_osd.lines; + /* Force update of yuv registers */ itv->yuv_info.yuv_forced_update = 1; -- cgit v1.2.3-59-g8ed1b From 368f080b6870e65d43c346e085e8f81ade5d3e07 Mon Sep 17 00:00:00 2001 From: Ian Armstrong Date: Mon, 5 Nov 2007 14:30:03 -0300 Subject: V4L/DVB (6718): ivtv: ivtv yuv format description correction The driver was incorrectly reporting that it supported YUV 4:2:2 output, when it is actually YUV 4:2:0. Though I believe the hardware can be pushed to 4:2:2, we don't currently support that. Signed-off-by: Ian Armstrong Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index 57eb8dfe53fa..0618fee24952 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -894,7 +894,7 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void case VIDIOC_ENUM_FMT: { static struct v4l2_fmtdesc formats[] = { { 0, 0, 0, - "HM12 (YUV 4:2:2)", V4L2_PIX_FMT_HM12, + "HM12 (YUV 4:2:0)", V4L2_PIX_FMT_HM12, { 0, 0, 0, 0 } }, { 1, 0, V4L2_FMT_FLAG_COMPRESSED, -- cgit v1.2.3-59-g8ed1b From 2b057e8dc6cc8318956fef92b77a4e86985e84d9 Mon Sep 17 00:00:00 2001 From: Ian Armstrong Date: Tue, 13 Nov 2007 19:15:25 -0300 Subject: V4L/DVB (6719): ivtv: ivtv-yuv clean-up + source cropping bug-fix ivtv-yuv code clean up & reformat. Includes minor changes to some debug lines. Also fixes a bug found during the reformatting, which would cause the incorrect amount of yuv data to be sent to the card if source cropping coordinates were used. Apart from the bug-fix, there should be no functional difference to the previous version. Signed-off-by: Ian Armstrong Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-yuv.c | 635 ++++++++++++++++++------------------ 1 file changed, 320 insertions(+), 315 deletions(-) diff --git a/drivers/media/video/ivtv/ivtv-yuv.c b/drivers/media/video/ivtv/ivtv-yuv.c index 711ce5b5a20f..85183480a225 100644 --- a/drivers/media/video/ivtv/ivtv-yuv.c +++ b/drivers/media/video/ivtv/ivtv-yuv.c @@ -35,7 +35,7 @@ const u32 yuv_offset[IVTV_YUV_BUFFERS] = { }; static int ivtv_yuv_prep_user_dma(struct ivtv *itv, struct ivtv_user_dma *dma, - struct ivtv_dma_frame *args) + struct ivtv_dma_frame *args) { struct ivtv_dma_page_info y_dma; struct ivtv_dma_page_info uv_dma; @@ -50,7 +50,7 @@ static int ivtv_yuv_prep_user_dma(struct ivtv *itv, struct ivtv_user_dma *dma, y_buffer_offset = IVTV_DECODER_OFFSET + yuv_offset[frame]; uv_buffer_offset = y_buffer_offset + IVTV_YUV_BUFFER_UV_OFFSET; - y_decode_height = uv_decode_height = f->src_h + f->src_x; + y_decode_height = uv_decode_height = f->src_h + f->src_y; if (f->offset_y) y_buffer_offset += 720 * 16; @@ -65,8 +65,9 @@ static int ivtv_yuv_prep_user_dma(struct ivtv *itv, struct ivtv_user_dma *dma, /* Still in USE */ if (dma->SG_length || dma->page_count) { - IVTV_DEBUG_WARN("prep_user_dma: SG_length %d page_count %d still full?\n", - dma->SG_length, dma->page_count); + IVTV_DEBUG_WARN + ("prep_user_dma: SG_length %d page_count %d still full?\n", + dma->SG_length, dma->page_count); return -EBUSY; } @@ -82,8 +83,9 @@ static int ivtv_yuv_prep_user_dma(struct ivtv *itv, struct ivtv_user_dma *dma, dma->page_count = y_dma.page_count + uv_dma.page_count; if (y_pages + uv_pages != dma->page_count) { - IVTV_DEBUG_WARN("failed to map user pages, returned %d instead of %d\n", - y_pages + uv_pages, dma->page_count); + IVTV_DEBUG_WARN + ("failed to map user pages, returned %d instead of %d\n", + y_pages + uv_pages, dma->page_count); for (i = 0; i < dma->page_count; i++) { put_page(dma->map[i]); @@ -104,12 +106,12 @@ static int ivtv_yuv_prep_user_dma(struct ivtv *itv, struct ivtv_user_dma *dma, dma->SG_length = pci_map_sg(itv->dev, dma->SGlist, dma->page_count, PCI_DMA_TODEVICE); /* Fill SG Array with new values */ - ivtv_udma_fill_sg_array (dma, y_buffer_offset, uv_buffer_offset, y_size); + ivtv_udma_fill_sg_array(dma, y_buffer_offset, uv_buffer_offset, y_size); /* If we've offset the y plane, ensure top area is blanked */ - if (f->offset_y && itv->yuv_info.blanking_dmaptr) { + if (f->offset_y && yi->blanking_dmaptr) { dma->SGarray[dma->SG_length].size = cpu_to_le32(720*16); - dma->SGarray[dma->SG_length].src = cpu_to_le32(itv->yuv_info.blanking_dmaptr); + dma->SGarray[dma->SG_length].src = cpu_to_le32(yi->blanking_dmaptr); dma->SGarray[dma->SG_length].dst = cpu_to_le32(IVTV_DECODER_OFFSET + yuv_offset[frame]); dma->SG_length++; } @@ -124,11 +126,11 @@ static int ivtv_yuv_prep_user_dma(struct ivtv *itv, struct ivtv_user_dma *dma, /* We rely on a table held in the firmware - Quick check. */ int ivtv_yuv_filter_check(struct ivtv *itv) { - int i, offset_y, offset_uv; + int i, y, uv; - for (i=0, offset_y = 16, offset_uv = 4; i<16; i++, offset_y += 24, offset_uv += 12) { - if ((read_dec(IVTV_YUV_HORIZONTAL_FILTER_OFFSET + offset_y) != i << 16) || - (read_dec(IVTV_YUV_VERTICAL_FILTER_OFFSET + offset_uv) != i << 16)) { + for (i = 0, y = 16, uv = 4; i < 16; i++, y += 24, uv += 12) { + if ((read_dec(IVTV_YUV_HORIZONTAL_FILTER_OFFSET + y) != i << 16) || + (read_dec(IVTV_YUV_VERTICAL_FILTER_OFFSET + uv) != i << 16)) { IVTV_WARN ("YUV filter table not found in firmware.\n"); return -1; } @@ -138,69 +140,67 @@ int ivtv_yuv_filter_check(struct ivtv *itv) static void ivtv_yuv_filter(struct ivtv *itv, int h_filter, int v_filter_1, int v_filter_2) { - int filter_index, filter_line; + u32 i, line; /* If any filter is -1, then don't update it */ if (h_filter > -1) { - if (h_filter > 4) h_filter = 4; - filter_index = h_filter * 384; - filter_line = 0; - while (filter_line < 16) { - write_reg(read_dec(IVTV_YUV_HORIZONTAL_FILTER_OFFSET + filter_index), 0x02804); - write_reg(read_dec(IVTV_YUV_HORIZONTAL_FILTER_OFFSET + filter_index), 0x0281c); - filter_index += 4; - write_reg(read_dec(IVTV_YUV_HORIZONTAL_FILTER_OFFSET + filter_index), 0x02808); - write_reg(read_dec(IVTV_YUV_HORIZONTAL_FILTER_OFFSET + filter_index), 0x02820); - filter_index += 4; - write_reg(read_dec(IVTV_YUV_HORIZONTAL_FILTER_OFFSET + filter_index), 0x0280c); - write_reg(read_dec(IVTV_YUV_HORIZONTAL_FILTER_OFFSET + filter_index), 0x02824); - filter_index += 4; - write_reg(read_dec(IVTV_YUV_HORIZONTAL_FILTER_OFFSET + filter_index), 0x02810); - write_reg(read_dec(IVTV_YUV_HORIZONTAL_FILTER_OFFSET + filter_index), 0x02828); - filter_index += 4; - write_reg(read_dec(IVTV_YUV_HORIZONTAL_FILTER_OFFSET + filter_index), 0x02814); - write_reg(read_dec(IVTV_YUV_HORIZONTAL_FILTER_OFFSET + filter_index), 0x0282c); - filter_index += 8; + if (h_filter > 4) + h_filter = 4; + i = IVTV_YUV_HORIZONTAL_FILTER_OFFSET + (h_filter * 384); + for (line = 0; line < 16; line++) { + write_reg(read_dec(i), 0x02804); + write_reg(read_dec(i), 0x0281c); + i += 4; + write_reg(read_dec(i), 0x02808); + write_reg(read_dec(i), 0x02820); + i += 4; + write_reg(read_dec(i), 0x0280c); + write_reg(read_dec(i), 0x02824); + i += 4; + write_reg(read_dec(i), 0x02810); + write_reg(read_dec(i), 0x02828); + i += 4; + write_reg(read_dec(i), 0x02814); + write_reg(read_dec(i), 0x0282c); + i += 8; write_reg(0, 0x02818); write_reg(0, 0x02830); - filter_line ++; } - IVTV_DEBUG_YUV("h_filter -> %d\n",h_filter); + IVTV_DEBUG_YUV("h_filter -> %d\n", h_filter); } if (v_filter_1 > -1) { - if (v_filter_1 > 4) v_filter_1 = 4; - filter_index = v_filter_1 * 192; - filter_line = 0; - while (filter_line < 16) { - write_reg(read_dec(IVTV_YUV_VERTICAL_FILTER_OFFSET + filter_index), 0x02900); - filter_index += 4; - write_reg(read_dec(IVTV_YUV_VERTICAL_FILTER_OFFSET + filter_index), 0x02904); - filter_index += 8; + if (v_filter_1 > 4) + v_filter_1 = 4; + i = IVTV_YUV_VERTICAL_FILTER_OFFSET + (v_filter_1 * 192); + for (line = 0; line < 16; line++) { + write_reg(read_dec(i), 0x02900); + i += 4; + write_reg(read_dec(i), 0x02904); + i += 8; write_reg(0, 0x02908); - filter_line ++; } - IVTV_DEBUG_YUV("v_filter_1 -> %d\n",v_filter_1); + IVTV_DEBUG_YUV("v_filter_1 -> %d\n", v_filter_1); } if (v_filter_2 > -1) { - if (v_filter_2 > 4) v_filter_2 = 4; - filter_index = v_filter_2 * 192; - filter_line = 0; - while (filter_line < 16) { - write_reg(read_dec(IVTV_YUV_VERTICAL_FILTER_OFFSET + filter_index), 0x0290c); - filter_index += 4; - write_reg(read_dec(IVTV_YUV_VERTICAL_FILTER_OFFSET + filter_index), 0x02910); - filter_index += 8; + if (v_filter_2 > 4) + v_filter_2 = 4; + i = IVTV_YUV_VERTICAL_FILTER_OFFSET + (v_filter_2 * 192); + for (line = 0; line < 16; line++) { + write_reg(read_dec(i), 0x0290c); + i += 4; + write_reg(read_dec(i), 0x02910); + i += 8; write_reg(0, 0x02914); - filter_line ++; } - IVTV_DEBUG_YUV("v_filter_2 -> %d\n",v_filter_2); + IVTV_DEBUG_YUV("v_filter_2 -> %d\n", v_filter_2); } } -static void ivtv_yuv_handle_horizontal(struct ivtv *itv, struct yuv_frame_info *window) +static void ivtv_yuv_handle_horizontal(struct ivtv *itv, struct yuv_frame_info *f) { + struct yuv_playback_info *yi = &itv->yuv_info; u32 reg_2834, reg_2838, reg_283c; u32 reg_2844, reg_2854, reg_285c; u32 reg_2864, reg_2874, reg_2890; @@ -209,18 +209,19 @@ static void ivtv_yuv_handle_horizontal(struct ivtv *itv, struct yuv_frame_info * int h_filter; u32 master_width; - IVTV_DEBUG_WARN( "Need to adjust to width %d src_w %d dst_w %d src_x %d dst_x %d\n", - window->tru_w, window->src_w, window->dst_w,window->src_x, window->dst_x); + IVTV_DEBUG_WARN + ("Adjust to width %d src_w %d dst_w %d src_x %d dst_x %d\n", + f->tru_w, f->src_w, f->dst_w, f->src_x, f->dst_x); /* How wide is the src image */ - x_cutoff = window->src_w + window->src_x; + x_cutoff = f->src_w + f->src_x; /* Set the display width */ - reg_2834 = window->dst_w; + reg_2834 = f->dst_w; reg_2838 = reg_2834; /* Set the display position */ - reg_2890 = window->dst_x; + reg_2890 = f->dst_x; /* Index into the image horizontally */ reg_2870 = 0; @@ -231,32 +232,31 @@ static void ivtv_yuv_handle_horizontal(struct ivtv *itv, struct yuv_frame_info * Gradually adjust the offset to avoid the video 'snapping' left/right if it gets dragged through this region. Only do this if osd is full width. */ - if (window->vis_w == 720) { - if ((window->tru_x - window->pan_x > -1) && (window->tru_x - window->pan_x <= 40) && (window->dst_w >= 680)){ - reg_2870 = 10 - (window->tru_x - window->pan_x) / 4; - } - else if ((window->tru_x - window->pan_x < 0) && (window->tru_x - window->pan_x >= -20) && (window->dst_w >= 660)) { - reg_2870 = (10 + (window->tru_x - window->pan_x) / 2); - } + if (f->vis_w == 720) { + if ((f->tru_x - f->pan_x > -1) && (f->tru_x - f->pan_x <= 40) && (f->dst_w >= 680)) + reg_2870 = 10 - (f->tru_x - f->pan_x) / 4; + else if ((f->tru_x - f->pan_x < 0) && (f->tru_x - f->pan_x >= -20) && (f->dst_w >= 660)) + reg_2870 = (10 + (f->tru_x - f->pan_x) / 2); - if (window->dst_w >= window->src_w) + if (f->dst_w >= f->src_w) reg_2870 = reg_2870 << 16 | reg_2870; else reg_2870 = ((reg_2870 & ~1) << 15) | (reg_2870 & ~1); } - if (window->dst_w < window->src_w) + if (f->dst_w < f->src_w) reg_2870 = 0x000d000e - reg_2870; else reg_2870 = 0x0012000e - reg_2870; /* We're also using 2870 to shift the image left (src_x & negative dst_x) */ - reg_2870_offset = (window->src_x*((window->dst_w << 21)/window->src_w))>>19; + reg_2870_offset = (f->src_x * ((f->dst_w << 21) / f->src_w)) >> 19; - if (window->dst_w >= window->src_w) { + if (f->dst_w >= f->src_w) { x_cutoff &= ~1; - master_width = (window->src_w * 0x00200000) / (window->dst_w); - if (master_width * window->dst_w != window->src_w * 0x00200000) master_width ++; + master_width = (f->src_w * 0x00200000) / (f->dst_w); + if (master_width * f->dst_w != f->src_w * 0x00200000) + master_width++; reg_2834 = (reg_2834 << 16) | x_cutoff; reg_2838 = (reg_2838 << 16) | x_cutoff; reg_283c = master_width >> 2; @@ -267,17 +267,17 @@ static void ivtv_yuv_handle_horizontal(struct ivtv *itv, struct yuv_frame_info * /* We also need to factor in the scaling (src_w - dst_w) / (src_w / 4) */ - if (window->dst_w > window->src_w) - reg_2870_base = ((window->dst_w - window->src_w)<<16) / (window->src_w <<14); + if (f->dst_w > f->src_w) + reg_2870_base = ((f->dst_w - f->src_w)<<16) / (f->src_w <<14); else reg_2870_base = 0; reg_2870 += (((reg_2870_offset << 14) & 0xFFFF0000) | reg_2870_offset >> 2) + (reg_2870_base << 17 | reg_2870_base); reg_2874 = 0; - } - else if (window->dst_w < window->src_w / 2) { - master_width = (window->src_w * 0x00080000) / window->dst_w; - if (master_width * window->dst_w != window->src_w * 0x00080000) master_width ++; + } else if (f->dst_w < f->src_w / 2) { + master_width = (f->src_w * 0x00080000) / f->dst_w; + if (master_width * f->dst_w != f->src_w * 0x00080000) + master_width++; reg_2834 = (reg_2834 << 16) | x_cutoff; reg_2838 = (reg_2838 << 16) | x_cutoff; reg_283c = master_width >> 2; @@ -285,13 +285,13 @@ static void ivtv_yuv_handle_horizontal(struct ivtv *itv, struct yuv_frame_info * reg_2854 = master_width; reg_285c = master_width >> 1; reg_2864 = master_width >> 1; - reg_2870 += (((reg_2870_offset << 15) & 0xFFFF0000) | reg_2870_offset); - reg_2870 += (5 - (((window->src_w + window->src_w / 2) - 1) / window->dst_w)) << 16; + reg_2870 += ((reg_2870_offset << 15) & 0xFFFF0000) | reg_2870_offset; + reg_2870 += (5 - (((f->src_w + f->src_w / 2) - 1) / f->dst_w)) << 16; reg_2874 = 0x00000012; - } - else { - master_width = (window->src_w * 0x00100000) / window->dst_w; - if (master_width * window->dst_w != window->src_w * 0x00100000) master_width ++; + } else { + master_width = (f->src_w * 0x00100000) / f->dst_w; + if (master_width * f->dst_w != f->src_w * 0x00100000) + master_width++; reg_2834 = (reg_2834 << 16) | x_cutoff; reg_2838 = (reg_2838 << 16) | x_cutoff; reg_283c = master_width >> 2; @@ -299,62 +299,70 @@ static void ivtv_yuv_handle_horizontal(struct ivtv *itv, struct yuv_frame_info * reg_2854 = master_width; reg_285c = master_width >> 1; reg_2864 = master_width >> 1; - reg_2870 += (((reg_2870_offset << 14) & 0xFFFF0000) | reg_2870_offset >> 1); - reg_2870 += (5 - (((window->src_w * 3) - 1) / window->dst_w)) << 16; + reg_2870 += ((reg_2870_offset << 14) & 0xFFFF0000) | reg_2870_offset >> 1; + reg_2870 += (5 - (((f->src_w * 3) - 1) / f->dst_w)) << 16; reg_2874 = 0x00000001; } /* Select the horizontal filter */ - if (window->src_w == window->dst_w) { + if (f->src_w == f->dst_w) { /* An exact size match uses filter 0 */ h_filter = 0; - } - else { + } else { /* Figure out which filter to use */ - h_filter = ((window->src_w << 16) / window->dst_w) >> 15; + h_filter = ((f->src_w << 16) / f->dst_w) >> 15; h_filter = (h_filter >> 1) + (h_filter & 1); /* Only an exact size match can use filter 0 */ - if (h_filter == 0) h_filter = 1; + h_filter += !h_filter; } write_reg(reg_2834, 0x02834); write_reg(reg_2838, 0x02838); - IVTV_DEBUG_YUV("Update reg 0x2834 %08x->%08x 0x2838 %08x->%08x\n",itv->yuv_info.reg_2834, reg_2834, itv->yuv_info.reg_2838, reg_2838); + IVTV_DEBUG_YUV("Update reg 0x2834 %08x->%08x 0x2838 %08x->%08x\n", + yi->reg_2834, reg_2834, yi->reg_2838, reg_2838); write_reg(reg_283c, 0x0283c); write_reg(reg_2844, 0x02844); - IVTV_DEBUG_YUV("Update reg 0x283c %08x->%08x 0x2844 %08x->%08x\n",itv->yuv_info.reg_283c, reg_283c, itv->yuv_info.reg_2844, reg_2844); + IVTV_DEBUG_YUV("Update reg 0x283c %08x->%08x 0x2844 %08x->%08x\n", + yi->reg_283c, reg_283c, yi->reg_2844, reg_2844); write_reg(0x00080514, 0x02840); write_reg(0x00100514, 0x02848); - IVTV_DEBUG_YUV("Update reg 0x2840 %08x->%08x 0x2848 %08x->%08x\n",itv->yuv_info.reg_2840, 0x00080514, itv->yuv_info.reg_2848, 0x00100514); + IVTV_DEBUG_YUV("Update reg 0x2840 %08x->%08x 0x2848 %08x->%08x\n", + yi->reg_2840, 0x00080514, yi->reg_2848, 0x00100514); write_reg(reg_2854, 0x02854); - IVTV_DEBUG_YUV("Update reg 0x2854 %08x->%08x \n",itv->yuv_info.reg_2854, reg_2854); + IVTV_DEBUG_YUV("Update reg 0x2854 %08x->%08x \n", + yi->reg_2854, reg_2854); write_reg(reg_285c, 0x0285c); write_reg(reg_2864, 0x02864); - IVTV_DEBUG_YUV("Update reg 0x285c %08x->%08x 0x2864 %08x->%08x\n",itv->yuv_info.reg_285c, reg_285c, itv->yuv_info.reg_2864, reg_2864); + IVTV_DEBUG_YUV("Update reg 0x285c %08x->%08x 0x2864 %08x->%08x\n", + yi->reg_285c, reg_285c, yi->reg_2864, reg_2864); write_reg(reg_2874, 0x02874); - IVTV_DEBUG_YUV("Update reg 0x2874 %08x->%08x\n",itv->yuv_info.reg_2874, reg_2874); + IVTV_DEBUG_YUV("Update reg 0x2874 %08x->%08x\n", + yi->reg_2874, reg_2874); write_reg(reg_2870, 0x02870); - IVTV_DEBUG_YUV("Update reg 0x2870 %08x->%08x\n",itv->yuv_info.reg_2870, reg_2870); + IVTV_DEBUG_YUV("Update reg 0x2870 %08x->%08x\n", + yi->reg_2870, reg_2870); - write_reg( reg_2890,0x02890); - IVTV_DEBUG_YUV("Update reg 0x2890 %08x->%08x\n",itv->yuv_info.reg_2890, reg_2890); + write_reg(reg_2890, 0x02890); + IVTV_DEBUG_YUV("Update reg 0x2890 %08x->%08x\n", + yi->reg_2890, reg_2890); /* Only update the filter if we really need to */ - if (h_filter != itv->yuv_info.h_filter) { - ivtv_yuv_filter (itv,h_filter,-1,-1); - itv->yuv_info.h_filter = h_filter; + if (h_filter != yi->h_filter) { + ivtv_yuv_filter(itv, h_filter, -1, -1); + yi->h_filter = h_filter; } } -static void ivtv_yuv_handle_vertical(struct ivtv *itv, struct yuv_frame_info *window) +static void ivtv_yuv_handle_vertical(struct ivtv *itv, struct yuv_frame_info *f) { + struct yuv_playback_info *yi = &itv->yuv_info; u32 master_height; u32 reg_2918, reg_291c, reg_2920, reg_2928; u32 reg_2930, reg_2934, reg_293c; @@ -362,69 +370,59 @@ static void ivtv_yuv_handle_vertical(struct ivtv *itv, struct yuv_frame_info *wi u32 reg_2950, reg_2954, reg_2958, reg_295c; u32 reg_2960, reg_2964, reg_2968, reg_296c; u32 reg_289c; - u32 src_y_major_y, src_y_minor_y; - u32 src_y_major_uv, src_y_minor_uv; + u32 src_major_y, src_minor_y; + u32 src_major_uv, src_minor_uv; u32 reg_2964_base, reg_2968_base; int v_filter_1, v_filter_2; - IVTV_DEBUG_WARN("Need to adjust to height %d src_h %d dst_h %d src_y %d dst_y %d\n", - window->tru_h, window->src_h, window->dst_h,window->src_y, window->dst_y); + IVTV_DEBUG_WARN + ("Adjust to height %d src_h %d dst_h %d src_y %d dst_y %d\n", + f->tru_h, f->src_h, f->dst_h, f->src_y, f->dst_y); /* What scaling mode is being used... */ - if (window->interlaced_y) { - IVTV_DEBUG_YUV("Scaling mode Y: Interlaced\n"); - } - else { - IVTV_DEBUG_YUV("Scaling mode Y: Progressive\n"); - } + IVTV_DEBUG_YUV("Scaling mode Y: %s\n", + f->interlaced_y ? "Interlaced" : "Progressive"); - if (window->interlaced_uv) { - IVTV_DEBUG_YUV("Scaling mode UV: Interlaced\n"); - } - else { - IVTV_DEBUG_YUV("Scaling mode UV: Progressive\n"); - } + IVTV_DEBUG_YUV("Scaling mode UV: %s\n", + f->interlaced_uv ? "Interlaced" : "Progressive"); /* What is the source video being treated as... */ - if (window->interlaced) { - IVTV_DEBUG_WARN("Source video: Interlaced\n"); - } - else { - IVTV_DEBUG_WARN("Source video: Non-interlaced\n"); - } + IVTV_DEBUG_WARN("Source video: %s\n", + f->interlaced ? "Interlaced" : "Progressive"); /* We offset into the image using two different index methods, so split the y source coord into two parts. */ - if (window->src_y < 8) { - src_y_minor_uv = window->src_y; - src_y_major_uv = 0; - } - else { - src_y_minor_uv = 8; - src_y_major_uv = window->src_y - 8; + if (f->src_y < 8) { + src_minor_uv = f->src_y; + src_major_uv = 0; + } else { + src_minor_uv = 8; + src_major_uv = f->src_y - 8; } - src_y_minor_y = src_y_minor_uv; - src_y_major_y = src_y_major_uv; + src_minor_y = src_minor_uv; + src_major_y = src_major_uv; - if (window->offset_y) src_y_minor_y += 16; + if (f->offset_y) + src_minor_y += 16; - if (window->interlaced_y) - reg_2918 = (window->dst_h << 16) | (window->src_h + src_y_minor_y); + if (f->interlaced_y) + reg_2918 = (f->dst_h << 16) | (f->src_h + src_minor_y); else - reg_2918 = (window->dst_h << 16) | ((window->src_h + src_y_minor_y) << 1); + reg_2918 = (f->dst_h << 16) | ((f->src_h + src_minor_y) << 1); - if (window->interlaced_uv) - reg_291c = (window->dst_h << 16) | ((window->src_h + src_y_minor_uv) >> 1); + if (f->interlaced_uv) + reg_291c = (f->dst_h << 16) | ((f->src_h + src_minor_uv) >> 1); else - reg_291c = (window->dst_h << 16) | (window->src_h + src_y_minor_uv); + reg_291c = (f->dst_h << 16) | (f->src_h + src_minor_uv); - reg_2964_base = (src_y_minor_y * ((window->dst_h << 16)/window->src_h)) >> 14; - reg_2968_base = (src_y_minor_uv * ((window->dst_h << 16)/window->src_h)) >> 14; + reg_2964_base = (src_minor_y * ((f->dst_h << 16) / f->src_h)) >> 14; + reg_2968_base = (src_minor_uv * ((f->dst_h << 16) / f->src_h)) >> 14; - if (window->dst_h / 2 >= window->src_h && !window->interlaced_y) { - master_height = (window->src_h * 0x00400000) / window->dst_h; - if ((window->src_h * 0x00400000) - (master_height * window->dst_h) >= window->dst_h / 2) master_height ++; + if (f->dst_h / 2 >= f->src_h && !f->interlaced_y) { + master_height = (f->src_h * 0x00400000) / f->dst_h; + if ((f->src_h * 0x00400000) - (master_height * f->dst_h) >= f->dst_h / 2) + master_height++; reg_2920 = master_height >> 2; reg_2928 = master_height >> 3; reg_2930 = master_height; @@ -432,45 +430,42 @@ static void ivtv_yuv_handle_vertical(struct ivtv *itv, struct yuv_frame_info *wi reg_2964_base >>= 3; reg_2968_base >>= 3; reg_296c = 0x00000000; - } - else if (window->dst_h >= window->src_h) { - master_height = (window->src_h * 0x00400000) / window->dst_h; + } else if (f->dst_h >= f->src_h) { + master_height = (f->src_h * 0x00400000) / f->dst_h; master_height = (master_height >> 1) + (master_height & 1); reg_2920 = master_height >> 2; reg_2928 = master_height >> 2; reg_2930 = master_height; reg_2940 = master_height >> 1; reg_296c = 0x00000000; - if (window->interlaced_y) { + if (f->interlaced_y) { reg_2964_base >>= 3; - } - else { - reg_296c ++; + } else { + reg_296c++; reg_2964_base >>= 2; } - if (window->interlaced_uv) reg_2928 >>= 1; + if (f->interlaced_uv) + reg_2928 >>= 1; reg_2968_base >>= 3; - } - else if (window->dst_h >= window->src_h / 2) { - master_height = (window->src_h * 0x00200000) / window->dst_h; + } else if (f->dst_h >= f->src_h / 2) { + master_height = (f->src_h * 0x00200000) / f->dst_h; master_height = (master_height >> 1) + (master_height & 1); reg_2920 = master_height >> 2; reg_2928 = master_height >> 2; reg_2930 = master_height; reg_2940 = master_height; reg_296c = 0x00000101; - if (window->interlaced_y) { + if (f->interlaced_y) { reg_2964_base >>= 2; - } - else { - reg_296c ++; + } else { + reg_296c++; reg_2964_base >>= 1; } - if (window->interlaced_uv) reg_2928 >>= 1; + if (f->interlaced_uv) + reg_2928 >>= 1; reg_2968_base >>= 2; - } - else { - master_height = (window->src_h * 0x00100000) / window->dst_h; + } else { + master_height = (f->src_h * 0x00100000) / f->dst_h; master_height = (master_height >> 1) + (master_height & 1); reg_2920 = master_height >> 2; reg_2928 = master_height >> 2; @@ -483,13 +478,12 @@ static void ivtv_yuv_handle_vertical(struct ivtv *itv, struct yuv_frame_info *wi /* FIXME These registers change depending on scaled / unscaled output We really need to work out what they should be */ - if (window->src_h == window->dst_h){ + if (f->src_h == f->dst_h) { reg_2934 = 0x00020000; reg_293c = 0x00100000; reg_2944 = 0x00040000; reg_294c = 0x000b0000; - } - else { + } else { reg_2934 = 0x00000FF0; reg_293c = 0x00000FF0; reg_2944 = 0x00000FF0; @@ -497,34 +491,36 @@ static void ivtv_yuv_handle_vertical(struct ivtv *itv, struct yuv_frame_info *wi } /* The first line to be displayed */ - reg_2950 = 0x00010000 + src_y_major_y; - if (window->interlaced_y) reg_2950 += 0x00010000; + reg_2950 = 0x00010000 + src_major_y; + if (f->interlaced_y) + reg_2950 += 0x00010000; reg_2954 = reg_2950 + 1; - reg_2958 = 0x00010000 + (src_y_major_y >> 1); - if (window->interlaced_uv) reg_2958 += 0x00010000; + reg_2958 = 0x00010000 + (src_major_y >> 1); + if (f->interlaced_uv) + reg_2958 += 0x00010000; reg_295c = reg_2958 + 1; - if (itv->yuv_info.decode_height == 480) + if (yi->decode_height == 480) reg_289c = 0x011e0017; else reg_289c = 0x01500017; - if (window->dst_y < 0) - reg_289c = (reg_289c - ((window->dst_y & ~1)<<15))-(window->dst_y >>1); + if (f->dst_y < 0) + reg_289c = (reg_289c - ((f->dst_y & ~1)<<15))-(f->dst_y >>1); else - reg_289c = (reg_289c + ((window->dst_y & ~1)<<15))+(window->dst_y >>1); + reg_289c = (reg_289c + ((f->dst_y & ~1)<<15))+(f->dst_y >>1); /* How much of the source to decode. Take into account the source offset */ - reg_2960 = ((src_y_minor_y + window->src_h + src_y_major_y) - 1 ) | - ((((src_y_minor_uv + window->src_h + src_y_major_uv) - 1) & ~1) << 15); + reg_2960 = ((src_minor_y + f->src_h + src_major_y) - 1) | + (((src_minor_uv + f->src_h + src_major_uv - 1) & ~1) << 15); /* Calculate correct value for register 2964 */ - if (window->src_h == window->dst_h) + if (f->src_h == f->dst_h) { reg_2964 = 1; - else { - reg_2964 = 2 + ((window->dst_h << 1) / window->src_h); + } else { + reg_2964 = 2 + ((f->dst_h << 1) / f->src_h); reg_2964 = (reg_2964 >> 1) + (reg_2964 & 1); } reg_2968 = (reg_2964 << 16) + reg_2964 + (reg_2964 >> 1); @@ -539,94 +535,107 @@ static void ivtv_yuv_handle_vertical(struct ivtv *itv, struct yuv_frame_info *wi /* Deviate further from what it should be. I find the flicker headache inducing so try to reduce it slightly. Leave 2968 as-is otherwise colours foul. */ - if ((reg_2964 != 0x00010001) && (window->dst_h / 2 <= window->src_h)) - reg_2964 = (reg_2964 & 0xFFFF0000) + ((reg_2964 & 0x0000FFFF)/2); + if ((reg_2964 != 0x00010001) && (f->dst_h / 2 <= f->src_h)) + reg_2964 = (reg_2964 & 0xFFFF0000) + ((reg_2964 & 0x0000FFFF) / 2); - if (!window->interlaced_y) reg_2964 -= 0x00010001; - if (!window->interlaced_uv) reg_2968 -= 0x00010001; + if (!f->interlaced_y) + reg_2964 -= 0x00010001; + if (!f->interlaced_uv) + reg_2968 -= 0x00010001; reg_2964 += ((reg_2964_base << 16) | reg_2964_base); reg_2968 += ((reg_2968_base << 16) | reg_2968_base); /* Select the vertical filter */ - if (window->src_h == window->dst_h) { + if (f->src_h == f->dst_h) { /* An exact size match uses filter 0/1 */ v_filter_1 = 0; v_filter_2 = 1; - } - else { + } else { /* Figure out which filter to use */ - v_filter_1 = ((window->src_h << 16) / window->dst_h) >> 15; + v_filter_1 = ((f->src_h << 16) / f->dst_h) >> 15; v_filter_1 = (v_filter_1 >> 1) + (v_filter_1 & 1); /* Only an exact size match can use filter 0 */ - if (v_filter_1 == 0) v_filter_1 = 1; + v_filter_1 += !v_filter_1; v_filter_2 = v_filter_1; } write_reg(reg_2934, 0x02934); write_reg(reg_293c, 0x0293c); - IVTV_DEBUG_YUV("Update reg 0x2934 %08x->%08x 0x293c %08x->%08x\n",itv->yuv_info.reg_2934, reg_2934, itv->yuv_info.reg_293c, reg_293c); + IVTV_DEBUG_YUV("Update reg 0x2934 %08x->%08x 0x293c %08x->%08x\n", + yi->reg_2934, reg_2934, yi->reg_293c, reg_293c); write_reg(reg_2944, 0x02944); write_reg(reg_294c, 0x0294c); - IVTV_DEBUG_YUV("Update reg 0x2944 %08x->%08x 0x294c %08x->%08x\n",itv->yuv_info.reg_2944, reg_2944, itv->yuv_info.reg_294c, reg_294c); + IVTV_DEBUG_YUV("Update reg 0x2944 %08x->%08x 0x294c %08x->%08x\n", + yi->reg_2944, reg_2944, yi->reg_294c, reg_294c); /* Ensure 2970 is 0 (does it ever change ?) */ /* write_reg(0,0x02970); */ -/* IVTV_DEBUG_YUV("Update reg 0x2970 %08x->%08x\n",itv->yuv_info.reg_2970, 0); */ +/* IVTV_DEBUG_YUV("Update reg 0x2970 %08x->%08x\n", yi->reg_2970, 0); */ write_reg(reg_2930, 0x02938); write_reg(reg_2930, 0x02930); - IVTV_DEBUG_YUV("Update reg 0x2930 %08x->%08x 0x2938 %08x->%08x\n",itv->yuv_info.reg_2930, reg_2930, itv->yuv_info.reg_2938, reg_2930); + IVTV_DEBUG_YUV("Update reg 0x2930 %08x->%08x 0x2938 %08x->%08x\n", + yi->reg_2930, reg_2930, yi->reg_2938, reg_2930); write_reg(reg_2928, 0x02928); - write_reg(reg_2928+0x514, 0x0292C); - IVTV_DEBUG_YUV("Update reg 0x2928 %08x->%08x 0x292c %08x->%08x\n",itv->yuv_info.reg_2928, reg_2928, itv->yuv_info.reg_292c, reg_2928+0x514); + write_reg(reg_2928 + 0x514, 0x0292C); + IVTV_DEBUG_YUV("Update reg 0x2928 %08x->%08x 0x292c %08x->%08x\n", + yi->reg_2928, reg_2928, yi->reg_292c, reg_2928 + 0x514); write_reg(reg_2920, 0x02920); - write_reg(reg_2920+0x514, 0x02924); - IVTV_DEBUG_YUV("Update reg 0x2920 %08x->%08x 0x2924 %08x->%08x\n",itv->yuv_info.reg_2920, reg_2920, itv->yuv_info.reg_2924, 0x514+reg_2920); + write_reg(reg_2920 + 0x514, 0x02924); + IVTV_DEBUG_YUV("Update reg 0x2920 %08x->%08x 0x2924 %08x->%08x\n", + yi->reg_2920, reg_2920, yi->reg_2924, reg_2920 + 0x514); - write_reg (reg_2918,0x02918); - write_reg (reg_291c,0x0291C); - IVTV_DEBUG_YUV("Update reg 0x2918 %08x->%08x 0x291C %08x->%08x\n",itv->yuv_info.reg_2918,reg_2918,itv->yuv_info.reg_291c,reg_291c); + write_reg(reg_2918, 0x02918); + write_reg(reg_291c, 0x0291C); + IVTV_DEBUG_YUV("Update reg 0x2918 %08x->%08x 0x291C %08x->%08x\n", + yi->reg_2918, reg_2918, yi->reg_291c, reg_291c); write_reg(reg_296c, 0x0296c); - IVTV_DEBUG_YUV("Update reg 0x296c %08x->%08x\n",itv->yuv_info.reg_296c, reg_296c); + IVTV_DEBUG_YUV("Update reg 0x296c %08x->%08x\n", + yi->reg_296c, reg_296c); write_reg(reg_2940, 0x02948); write_reg(reg_2940, 0x02940); - IVTV_DEBUG_YUV("Update reg 0x2940 %08x->%08x 0x2948 %08x->%08x\n",itv->yuv_info.reg_2940, reg_2940, itv->yuv_info.reg_2948, reg_2940); + IVTV_DEBUG_YUV("Update reg 0x2940 %08x->%08x 0x2948 %08x->%08x\n", + yi->reg_2940, reg_2940, yi->reg_2948, reg_2940); write_reg(reg_2950, 0x02950); write_reg(reg_2954, 0x02954); - IVTV_DEBUG_YUV("Update reg 0x2950 %08x->%08x 0x2954 %08x->%08x\n",itv->yuv_info.reg_2950, reg_2950, itv->yuv_info.reg_2954, reg_2954); + IVTV_DEBUG_YUV("Update reg 0x2950 %08x->%08x 0x2954 %08x->%08x\n", + yi->reg_2950, reg_2950, yi->reg_2954, reg_2954); write_reg(reg_2958, 0x02958); write_reg(reg_295c, 0x0295C); - IVTV_DEBUG_YUV("Update reg 0x2958 %08x->%08x 0x295C %08x->%08x\n",itv->yuv_info.reg_2958, reg_2958, itv->yuv_info.reg_295c, reg_295c); + IVTV_DEBUG_YUV("Update reg 0x2958 %08x->%08x 0x295C %08x->%08x\n", + yi->reg_2958, reg_2958, yi->reg_295c, reg_295c); write_reg(reg_2960, 0x02960); - IVTV_DEBUG_YUV("Update reg 0x2960 %08x->%08x \n",itv->yuv_info.reg_2960, reg_2960); + IVTV_DEBUG_YUV("Update reg 0x2960 %08x->%08x \n", + yi->reg_2960, reg_2960); write_reg(reg_2964, 0x02964); write_reg(reg_2968, 0x02968); - IVTV_DEBUG_YUV("Update reg 0x2964 %08x->%08x 0x2968 %08x->%08x\n",itv->yuv_info.reg_2964, reg_2964, itv->yuv_info.reg_2968, reg_2968); + IVTV_DEBUG_YUV("Update reg 0x2964 %08x->%08x 0x2968 %08x->%08x\n", + yi->reg_2964, reg_2964, yi->reg_2968, reg_2968); - write_reg( reg_289c,0x0289c); - IVTV_DEBUG_YUV("Update reg 0x289c %08x->%08x\n",itv->yuv_info.reg_289c, reg_289c); + write_reg(reg_289c, 0x0289c); + IVTV_DEBUG_YUV("Update reg 0x289c %08x->%08x\n", + yi->reg_289c, reg_289c); /* Only update filter 1 if we really need to */ - if (v_filter_1 != itv->yuv_info.v_filter_1) { - ivtv_yuv_filter (itv,-1,v_filter_1,-1); - itv->yuv_info.v_filter_1 = v_filter_1; + if (v_filter_1 != yi->v_filter_1) { + ivtv_yuv_filter(itv, -1, v_filter_1, -1); + yi->v_filter_1 = v_filter_1; } /* Only update filter 2 if we really need to */ - if (v_filter_2 != itv->yuv_info.v_filter_2) { - ivtv_yuv_filter (itv,-1,-1,v_filter_2); - itv->yuv_info.v_filter_2 = v_filter_2; + if (v_filter_2 != yi->v_filter_2) { + ivtv_yuv_filter(itv, -1, -1, v_filter_2); + yi->v_filter_2 = v_filter_2; } - } /* Modify the supplied coordinate information to fit the visible osd area */ @@ -668,7 +677,7 @@ static u32 ivtv_yuv_window_setup(struct ivtv *itv, struct yuv_frame_info *f) /* If there's nothing to safe to display, we may as well stop now */ if ((int)f->dst_w <= 2 || (int)f->dst_h <= 2 || - (int)f->src_w <= 2 || (int)f->src_h <= 2) { + (int)f->src_w <= 2 || (int)f->src_h <= 2) { return IVTV_YUV_UPDATE_INVALID; } @@ -749,23 +758,23 @@ static u32 ivtv_yuv_window_setup(struct ivtv *itv, struct yuv_frame_info *f) /* Check again. If there's nothing to safe to display, stop now */ if ((int)f->dst_w <= 2 || (int)f->dst_h <= 2 || - (int)f->src_w <= 2 || (int)f->src_h <= 2) { + (int)f->src_w <= 2 || (int)f->src_h <= 2) { return IVTV_YUV_UPDATE_INVALID; } /* Both x offset & width are linked, so they have to be done together */ if ((of->dst_w != f->dst_w) || (of->src_w != f->src_w) || - (of->dst_x != f->dst_x) || (of->src_x != f->src_x) || - (of->pan_x != f->pan_x) || (of->vis_w != f->vis_w)) { + (of->dst_x != f->dst_x) || (of->src_x != f->src_x) || + (of->pan_x != f->pan_x) || (of->vis_w != f->vis_w)) { yuv_update |= IVTV_YUV_UPDATE_HORIZONTAL; } if ((of->src_h != f->src_h) || (of->dst_h != f->dst_h) || - (of->dst_y != f->dst_y) || (of->src_y != f->src_y) || - (of->pan_y != f->pan_y) || (of->vis_h != f->vis_h) || - (of->lace_mode != f->lace_mode) || - (of->interlaced_y != f->interlaced_y) || - (of->interlaced_uv != f->interlaced_uv)) { + (of->dst_y != f->dst_y) || (of->src_y != f->src_y) || + (of->pan_y != f->pan_y) || (of->vis_h != f->vis_h) || + (of->lace_mode != f->lace_mode) || + (of->interlaced_y != f->interlaced_y) || + (of->interlaced_uv != f->interlaced_uv)) { yuv_update |= IVTV_YUV_UPDATE_VERTICAL; } @@ -773,24 +782,24 @@ static u32 ivtv_yuv_window_setup(struct ivtv *itv, struct yuv_frame_info *f) } /* Update the scaling register to the requested value */ -void ivtv_yuv_work_handler (struct ivtv *itv) +void ivtv_yuv_work_handler(struct ivtv *itv) { struct yuv_playback_info *yi = &itv->yuv_info; struct yuv_frame_info f; int frame = yi->update_frame; u32 yuv_update; -/* IVTV_DEBUG_YUV("Update yuv registers for frame %d\n",frame); */ + IVTV_DEBUG_YUV("Update yuv registers for frame %d\n", frame); f = yi->new_frame_info[frame]; /* Update the osd pan info */ - f.pan_x = itv->yuv_info.osd_x_pan; - f.pan_y = itv->yuv_info.osd_y_pan; - f.vis_w = itv->yuv_info.osd_vis_w; - f.vis_h = itv->yuv_info.osd_vis_h; + f.pan_x = yi->osd_x_pan; + f.pan_y = yi->osd_y_pan; + f.vis_w = yi->osd_vis_w; + f.vis_h = yi->osd_vis_h; /* Calculate the display window coordinates. Exit if nothing left */ - if (!(yuv_update = ivtv_yuv_window_setup (itv, &f))) + if (!(yuv_update = ivtv_yuv_window_setup(itv, &f))) return; if (yuv_update & IVTV_YUV_UPDATE_INVALID) { @@ -807,7 +816,7 @@ void ivtv_yuv_work_handler (struct ivtv *itv) yi->old_frame_info = f; } -static void ivtv_yuv_init (struct ivtv *itv) +static void ivtv_yuv_init(struct ivtv *itv) { struct yuv_playback_info *yi = &itv->yuv_info; @@ -876,25 +885,23 @@ static void ivtv_yuv_init (struct ivtv *itv) if (!yi->osd_vis_w) yi->osd_vis_w = 720 - yi->osd_x_offset; - if (!yi->osd_vis_h) + if (!yi->osd_vis_h) { yi->osd_vis_h = yi->decode_height - yi->osd_y_offset; - else { + } else if (yi->osd_vis_h + yi->osd_y_offset > yi->decode_height) { /* If output video standard has changed, requested height may - not be legal */ - if (yi->osd_vis_h + yi->osd_y_offset > yi->decode_height) { - IVTV_DEBUG_WARN("Clipping yuv output - fb size (%d) exceeds video standard limit (%d)\n", - yi->osd_vis_h + yi->osd_y_offset, - yi->decode_height); - yi->osd_vis_h = yi->decode_height - yi->osd_y_offset; - } + not be legal */ + IVTV_DEBUG_WARN("Clipping yuv output - fb size (%d) exceeds video standard limit (%d)\n", + yi->osd_vis_h + yi->osd_y_offset, + yi->decode_height); + yi->osd_vis_h = yi->decode_height - yi->osd_y_offset; } } /* We need a buffer for blanking when Y plane is offset - non-fatal if we can't get one */ - yi->blanking_ptr = kzalloc(720*16, GFP_KERNEL); - if (yi->blanking_ptr) + yi->blanking_ptr = kzalloc(720 * 16, GFP_KERNEL); + if (yi->blanking_ptr) { yi->blanking_dmaptr = pci_map_single(itv->dev, yi->blanking_ptr, 720*16, PCI_DMA_TODEVICE); - else { + } else { yi->blanking_dmaptr = 0; IVTV_DEBUG_WARN("Failed to allocate yuv blanking buffer\n"); } @@ -993,8 +1000,8 @@ void ivtv_yuv_setup_frame(struct ivtv *itv, struct ivtv_dma_frame *args) if (nf->tru_h <= lace_threshold || nf->tru_h > 576 || nf->tru_w > 720) { nf->interlaced = 0; if ((nf->tru_h < 512) || - (nf->tru_h > 576 && nf->tru_h < 1021) || - (nf->tru_w > 720 && nf->tru_h < 1021)) + (nf->tru_h > 576 && nf->tru_h < 1021) || + (nf->tru_w > 720 && nf->tru_h < 1021)) nf->interlaced_y = 0; else nf->interlaced_y = 1; @@ -1020,7 +1027,7 @@ void ivtv_yuv_setup_frame(struct ivtv *itv, struct ivtv_dma_frame *args) if (memcmp(&yi->old_frame_info_args, nf, sizeof(*nf))) { yi->old_frame_info_args = *nf; nf->update = 1; -/* IVTV_DEBUG_YUV ("Requesting register update for frame %d\n",frame); */ + IVTV_DEBUG_YUV("Requesting reg update for frame %d\n", frame); } nf->update |= update; @@ -1051,10 +1058,10 @@ int ivtv_yuv_udma_frame(struct ivtv *itv, struct ivtv_dma_frame *args) ivtv_udma_prepare(itv); prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE); /* if no UDMA is pending and no UDMA is in progress, then the DMA - is finished */ + is finished */ while (itv->i_flags & (IVTV_F_I_UDMA_PENDING | IVTV_F_I_UDMA)) { /* don't interrupt if the DMA is in progress but break off - a still pending DMA. */ + a still pending DMA. */ got_sig = signal_pending(current); if (got_sig && test_and_clear_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags)) break; @@ -1121,7 +1128,7 @@ int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void *src) /* IVTV_IOC_DMA_FRAME ioctl handler */ int ivtv_yuv_prep_frame(struct ivtv *itv, struct ivtv_dma_frame *args) { - IVTV_DEBUG_INFO("yuv_prep_frame\n"); +/* IVTV_DEBUG_INFO("yuv_prep_frame\n"); */ ivtv_yuv_next_free(itv); ivtv_yuv_setup_frame(itv, args); @@ -1130,91 +1137,90 @@ int ivtv_yuv_prep_frame(struct ivtv *itv, struct ivtv_dma_frame *args) void ivtv_yuv_close(struct ivtv *itv) { + struct yuv_playback_info *yi = &itv->yuv_info; int h_filter, v_filter_1, v_filter_2; IVTV_DEBUG_YUV("ivtv_yuv_close\n"); ivtv_waitq(&itv->vsync_waitq); - atomic_set(&itv->yuv_info.next_dma_frame, -1); - atomic_set(&itv->yuv_info.next_fill_frame, 0); + atomic_set(&yi->next_dma_frame, -1); + atomic_set(&yi->next_fill_frame, 0); /* Reset registers we have changed so mpeg playback works */ /* If we fully restore this register, the display may remain active. Restore, but set one bit to blank the video. Firmware will always clear this bit when needed, so not a problem. */ - write_reg(itv->yuv_info.reg_2898 | 0x01000000, 0x2898); - - write_reg(itv->yuv_info.reg_2834, 0x02834); - write_reg(itv->yuv_info.reg_2838, 0x02838); - write_reg(itv->yuv_info.reg_283c, 0x0283c); - write_reg(itv->yuv_info.reg_2840, 0x02840); - write_reg(itv->yuv_info.reg_2844, 0x02844); - write_reg(itv->yuv_info.reg_2848, 0x02848); - write_reg(itv->yuv_info.reg_2854, 0x02854); - write_reg(itv->yuv_info.reg_285c, 0x0285c); - write_reg(itv->yuv_info.reg_2864, 0x02864); - write_reg(itv->yuv_info.reg_2870, 0x02870); - write_reg(itv->yuv_info.reg_2874, 0x02874); - write_reg(itv->yuv_info.reg_2890, 0x02890); - write_reg(itv->yuv_info.reg_289c, 0x0289c); - - write_reg(itv->yuv_info.reg_2918, 0x02918); - write_reg(itv->yuv_info.reg_291c, 0x0291c); - write_reg(itv->yuv_info.reg_2920, 0x02920); - write_reg(itv->yuv_info.reg_2924, 0x02924); - write_reg(itv->yuv_info.reg_2928, 0x02928); - write_reg(itv->yuv_info.reg_292c, 0x0292c); - write_reg(itv->yuv_info.reg_2930, 0x02930); - write_reg(itv->yuv_info.reg_2934, 0x02934); - write_reg(itv->yuv_info.reg_2938, 0x02938); - write_reg(itv->yuv_info.reg_293c, 0x0293c); - write_reg(itv->yuv_info.reg_2940, 0x02940); - write_reg(itv->yuv_info.reg_2944, 0x02944); - write_reg(itv->yuv_info.reg_2948, 0x02948); - write_reg(itv->yuv_info.reg_294c, 0x0294c); - write_reg(itv->yuv_info.reg_2950, 0x02950); - write_reg(itv->yuv_info.reg_2954, 0x02954); - write_reg(itv->yuv_info.reg_2958, 0x02958); - write_reg(itv->yuv_info.reg_295c, 0x0295c); - write_reg(itv->yuv_info.reg_2960, 0x02960); - write_reg(itv->yuv_info.reg_2964, 0x02964); - write_reg(itv->yuv_info.reg_2968, 0x02968); - write_reg(itv->yuv_info.reg_296c, 0x0296c); - write_reg(itv->yuv_info.reg_2970, 0x02970); + write_reg(yi->reg_2898 | 0x01000000, 0x2898); + + write_reg(yi->reg_2834, 0x02834); + write_reg(yi->reg_2838, 0x02838); + write_reg(yi->reg_283c, 0x0283c); + write_reg(yi->reg_2840, 0x02840); + write_reg(yi->reg_2844, 0x02844); + write_reg(yi->reg_2848, 0x02848); + write_reg(yi->reg_2854, 0x02854); + write_reg(yi->reg_285c, 0x0285c); + write_reg(yi->reg_2864, 0x02864); + write_reg(yi->reg_2870, 0x02870); + write_reg(yi->reg_2874, 0x02874); + write_reg(yi->reg_2890, 0x02890); + write_reg(yi->reg_289c, 0x0289c); + + write_reg(yi->reg_2918, 0x02918); + write_reg(yi->reg_291c, 0x0291c); + write_reg(yi->reg_2920, 0x02920); + write_reg(yi->reg_2924, 0x02924); + write_reg(yi->reg_2928, 0x02928); + write_reg(yi->reg_292c, 0x0292c); + write_reg(yi->reg_2930, 0x02930); + write_reg(yi->reg_2934, 0x02934); + write_reg(yi->reg_2938, 0x02938); + write_reg(yi->reg_293c, 0x0293c); + write_reg(yi->reg_2940, 0x02940); + write_reg(yi->reg_2944, 0x02944); + write_reg(yi->reg_2948, 0x02948); + write_reg(yi->reg_294c, 0x0294c); + write_reg(yi->reg_2950, 0x02950); + write_reg(yi->reg_2954, 0x02954); + write_reg(yi->reg_2958, 0x02958); + write_reg(yi->reg_295c, 0x0295c); + write_reg(yi->reg_2960, 0x02960); + write_reg(yi->reg_2964, 0x02964); + write_reg(yi->reg_2968, 0x02968); + write_reg(yi->reg_296c, 0x0296c); + write_reg(yi->reg_2970, 0x02970); /* Prepare to restore filters */ /* First the horizontal filter */ - if ((itv->yuv_info.reg_2834 & 0x0000FFFF) == (itv->yuv_info.reg_2834 >> 16)) { + if ((yi->reg_2834 & 0x0000FFFF) == (yi->reg_2834 >> 16)) { /* An exact size match uses filter 0 */ h_filter = 0; - } - else { + } else { /* Figure out which filter to use */ - h_filter = ((itv->yuv_info.reg_2834 << 16) / (itv->yuv_info.reg_2834 >> 16)) >> 15; + h_filter = ((yi->reg_2834 << 16) / (yi->reg_2834 >> 16)) >> 15; h_filter = (h_filter >> 1) + (h_filter & 1); /* Only an exact size match can use filter 0. */ - if (h_filter < 1) h_filter = 1; + h_filter += !h_filter; } /* Now the vertical filter */ - if ((itv->yuv_info.reg_2918 & 0x0000FFFF) == (itv->yuv_info.reg_2918 >> 16)) { + if ((yi->reg_2918 & 0x0000FFFF) == (yi->reg_2918 >> 16)) { /* An exact size match uses filter 0/1 */ v_filter_1 = 0; v_filter_2 = 1; - } - else { + } else { /* Figure out which filter to use */ - v_filter_1 = ((itv->yuv_info.reg_2918 << 16) / (itv->yuv_info.reg_2918 >> 16)) >> 15; + v_filter_1 = ((yi->reg_2918 << 16) / (yi->reg_2918 >> 16)) >> 15; v_filter_1 = (v_filter_1 >> 1) + (v_filter_1 & 1); /* Only an exact size match can use filter 0 */ - if (v_filter_1 == 0) v_filter_1 = 1; + v_filter_1 += !v_filter_1; v_filter_2 = v_filter_1; } /* Now restore the filters */ - ivtv_yuv_filter (itv,h_filter,v_filter_1,v_filter_2); + ivtv_yuv_filter(itv, h_filter, v_filter_1, v_filter_2); /* and clear a few registers */ write_reg(0, 0x02814); @@ -1223,19 +1229,18 @@ void ivtv_yuv_close(struct ivtv *itv) write_reg(0, 0x02910); /* Release the blanking buffer */ - if (itv->yuv_info.blanking_ptr) { - kfree (itv->yuv_info.blanking_ptr); - itv->yuv_info.blanking_ptr = NULL; - pci_unmap_single(itv->dev, itv->yuv_info.blanking_dmaptr, 720*16, PCI_DMA_TODEVICE); + if (yi->blanking_ptr) { + kfree(yi->blanking_ptr); + yi->blanking_ptr = NULL; + pci_unmap_single(itv->dev, yi->blanking_dmaptr, 720*16, PCI_DMA_TODEVICE); } /* Invalidate the old dimension information */ - itv->yuv_info.old_frame_info.src_w = 0; - itv->yuv_info.old_frame_info.src_h = 0; - itv->yuv_info.old_frame_info_args.src_w = 0; - itv->yuv_info.old_frame_info_args.src_h = 0; + yi->old_frame_info.src_w = 0; + yi->old_frame_info.src_h = 0; + yi->old_frame_info_args.src_w = 0; + yi->old_frame_info_args.src_h = 0; /* All done. */ clear_bit(IVTV_F_I_DECODING_YUV, &itv->i_flags); } - -- cgit v1.2.3-59-g8ed1b From efce841093589bfef571a07e18e5446def9e04b4 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 1 Dec 2007 17:40:16 -0300 Subject: V4L/DVB (6723): tda18271: only force init once during attach Once the image rejection calibration procedure has been successful, we should not initialize the tuner registers again. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index 726e102cbc5d..25c127f67c22 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -337,6 +337,20 @@ static int tda18271_init_regs(struct dvb_frontend *fe) return 0; } +static int tda18271_init(struct dvb_frontend *fe) +{ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + + tda18271_read_regs(fe); + + /* test IR_CAL_OK to see if we need init */ + if ((regs[R_EP1] & 0x08) == 0) + tda18271_init_regs(fe); + + return 0; +} + static int tda18271_tune(struct dvb_frontend *fe, u32 ifc, u32 freq, u32 bw, u8 std) { @@ -742,7 +756,7 @@ static struct dvb_tuner_ops tda18271_tuner_ops = { .frequency_max = 864000000, .frequency_step = 62500 }, - .init = tda18271_init_regs, + .init = tda18271_init, .set_params = tda18271_set_params, .set_analog_params = tda18271_set_analog_params, .release = tda18271_release, @@ -768,6 +782,8 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, fe->tuner_priv = priv; + tda18271_init_regs(fe); + return fe; } EXPORT_SYMBOL_GPL(tda18271_attach); -- cgit v1.2.3-59-g8ed1b From 1457263e9df6911384c474532a49d1b25bc9d248 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 2 Dec 2007 02:32:49 -0300 Subject: V4L/DVB (6724): tda18271: remove duplicated code Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index 25c127f67c22..1944177da873 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -359,12 +359,7 @@ static int tda18271_tune(struct dvb_frontend *fe, u32 div, N = 0; int i; - tda18271_read_regs(fe); - - /* test IR_CAL_OK to see if we need init */ - if ((regs[R_EP1] & 0x08) == 0) - tda18271_init_regs(fe); - + tda18271_init(fe); dprintk(1, "freq = %d, ifc = %d\n", freq, ifc); -- cgit v1.2.3-59-g8ed1b From 293da0ec468addf891856e9ffee88af2fd00e25a Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 2 Dec 2007 02:45:04 -0300 Subject: V4L/DVB (6725): tda18271: improve debug flexibility converted debug module option to an or-able setting. 1 = info 2 = table map values 4 = register dumps Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 70 +++++++++++++++++-------------- 1 file changed, 39 insertions(+), 31 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index 1944177da873..01de75e369ed 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -27,12 +27,20 @@ static int tda18271_debug; module_param_named(debug, tda18271_debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); +MODULE_PARM_DESC(debug, "set debug level (info=1, map=2, reg=4 (or-able))"); #define dprintk(level, fmt, arg...) do {\ - if (tda18271_debug >= level) \ + if (tda18271_debug & level) \ printk(KERN_DEBUG "%s: " fmt, __FUNCTION__, ##arg); } while (0) +#define DBG_INFO 1 +#define DBG_MAP 2 +#define DBG_REG 4 + +#define dbg_info(fmt, arg...) dprintk(DBG_INFO, fmt, ##arg) +#define dbg_map(fmt, arg...) dprintk(DBG_MAP, fmt, ##arg) +#define dbg_reg(fmt, arg...) dprintk(DBG_REG, fmt, ##arg) + /*---------------------------------------------------------------------*/ #define TDA18271_ANALOG 0 @@ -75,23 +83,23 @@ static void tda18271_dump_regs(struct dvb_frontend *fe) struct tda18271_priv *priv = fe->tuner_priv; unsigned char *regs = priv->tda18271_regs; - dprintk(1, "=== TDA18271 REG DUMP ===\n"); - dprintk(1, "ID_BYTE = 0x%x\n", 0xff & regs[R_ID]); - dprintk(1, "THERMO_BYTE = 0x%x\n", 0xff & regs[R_TM]); - dprintk(1, "POWER_LEVEL_BYTE = 0x%x\n", 0xff & regs[R_PL]); - dprintk(1, "EASY_PROG_BYTE_1 = 0x%x\n", 0xff & regs[R_EP1]); - dprintk(1, "EASY_PROG_BYTE_2 = 0x%x\n", 0xff & regs[R_EP2]); - dprintk(1, "EASY_PROG_BYTE_3 = 0x%x\n", 0xff & regs[R_EP3]); - dprintk(1, "EASY_PROG_BYTE_4 = 0x%x\n", 0xff & regs[R_EP4]); - dprintk(1, "EASY_PROG_BYTE_5 = 0x%x\n", 0xff & regs[R_EP5]); - dprintk(1, "CAL_POST_DIV_BYTE = 0x%x\n", 0xff & regs[R_CPD]); - dprintk(1, "CAL_DIV_BYTE_1 = 0x%x\n", 0xff & regs[R_CD1]); - dprintk(1, "CAL_DIV_BYTE_2 = 0x%x\n", 0xff & regs[R_CD2]); - dprintk(1, "CAL_DIV_BYTE_3 = 0x%x\n", 0xff & regs[R_CD3]); - dprintk(1, "MAIN_POST_DIV_BYTE = 0x%x\n", 0xff & regs[R_MPD]); - dprintk(1, "MAIN_DIV_BYTE_1 = 0x%x\n", 0xff & regs[R_MD1]); - dprintk(1, "MAIN_DIV_BYTE_2 = 0x%x\n", 0xff & regs[R_MD2]); - dprintk(1, "MAIN_DIV_BYTE_3 = 0x%x\n", 0xff & regs[R_MD3]); + dbg_reg("=== TDA18271 REG DUMP ===\n"); + dbg_reg("ID_BYTE = 0x%x\n", 0xff & regs[R_ID]); + dbg_reg("THERMO_BYTE = 0x%x\n", 0xff & regs[R_TM]); + dbg_reg("POWER_LEVEL_BYTE = 0x%x\n", 0xff & regs[R_PL]); + dbg_reg("EASY_PROG_BYTE_1 = 0x%x\n", 0xff & regs[R_EP1]); + dbg_reg("EASY_PROG_BYTE_2 = 0x%x\n", 0xff & regs[R_EP2]); + dbg_reg("EASY_PROG_BYTE_3 = 0x%x\n", 0xff & regs[R_EP3]); + dbg_reg("EASY_PROG_BYTE_4 = 0x%x\n", 0xff & regs[R_EP4]); + dbg_reg("EASY_PROG_BYTE_5 = 0x%x\n", 0xff & regs[R_EP5]); + dbg_reg("CAL_POST_DIV_BYTE = 0x%x\n", 0xff & regs[R_CPD]); + dbg_reg("CAL_DIV_BYTE_1 = 0x%x\n", 0xff & regs[R_CD1]); + dbg_reg("CAL_DIV_BYTE_2 = 0x%x\n", 0xff & regs[R_CD2]); + dbg_reg("CAL_DIV_BYTE_3 = 0x%x\n", 0xff & regs[R_CD3]); + dbg_reg("MAIN_POST_DIV_BYTE = 0x%x\n", 0xff & regs[R_MPD]); + dbg_reg("MAIN_DIV_BYTE_1 = 0x%x\n", 0xff & regs[R_MD1]); + dbg_reg("MAIN_DIV_BYTE_2 = 0x%x\n", 0xff & regs[R_MD2]); + dbg_reg("MAIN_DIV_BYTE_3 = 0x%x\n", 0xff & regs[R_MD3]); } static void tda18271_read_regs(struct dvb_frontend *fe) @@ -118,7 +126,7 @@ static void tda18271_read_regs(struct dvb_frontend *fe) printk("ERROR: %s: i2c_transfer returned: %d\n", __FUNCTION__, ret); - if (tda18271_debug > 2) + if (tda18271_debug & DBG_REG) tda18271_dump_regs(fe); } @@ -361,7 +369,7 @@ static int tda18271_tune(struct dvb_frontend *fe, tda18271_init(fe); - dprintk(1, "freq = %d, ifc = %d\n", freq, ifc); + dbg_info("freq = %d, ifc = %d\n", freq, ifc); /* RF tracking filter calibration */ @@ -372,7 +380,7 @@ static int tda18271_tune(struct dvb_frontend *fe, break; i++; } - dprintk(2, "bp filter = 0x%x, i = %d\n", tda18271_bp_filter[i].val, i); + dbg_map("bp filter = 0x%x, i = %d\n", tda18271_bp_filter[i].val, i); regs[R_EP1] &= ~0x07; /* clear bp filter bits */ regs[R_EP1] |= tda18271_bp_filter[i].val; @@ -411,7 +419,7 @@ static int tda18271_tune(struct dvb_frontend *fe, break; i++; } - dprintk(2, "cal pll, pd = 0x%x, d = 0x%x, i = %d\n", + dbg_map("cal pll, pd = 0x%x, d = 0x%x, i = %d\n", tda18271_cal_pll[i].pd, tda18271_cal_pll[i].d, i); regs[R_CPD] = tda18271_cal_pll[i].pd; @@ -438,7 +446,7 @@ static int tda18271_tune(struct dvb_frontend *fe, break; i++; } - dprintk(2, "main pll, pd = 0x%x, d = 0x%x, i = %d\n", + dbg_map("main pll, pd = 0x%x, d = 0x%x, i = %d\n", tda18271_main_pll[i].pd, tda18271_main_pll[i].d, i); regs[R_MPD] = (0x7f & tda18271_main_pll[i].pd); @@ -467,7 +475,7 @@ static int tda18271_tune(struct dvb_frontend *fe, break; i++; } - dprintk(2, "km = 0x%x, i = %d\n", tda18271_km[i].val, i); + dbg_map("km = 0x%x, i = %d\n", tda18271_km[i].val, i); regs[R_EB13] &= 0x83; regs[R_EB13] |= tda18271_km[i].val; @@ -480,7 +488,7 @@ static int tda18271_tune(struct dvb_frontend *fe, break; i++; } - dprintk(2, "rf band = 0x%x, i = %d\n", tda18271_rf_band[i].val, i); + dbg_map("rf band = 0x%x, i = %d\n", tda18271_rf_band[i].val, i); regs[R_EP2] &= ~0xe0; /* clear rf band bits */ regs[R_EP2] |= (tda18271_rf_band[i].val << 5); @@ -492,7 +500,7 @@ static int tda18271_tune(struct dvb_frontend *fe, break; i++; } - dprintk(2, "gain taper = 0x%x, i = %d\n", + dbg_map("gain taper = 0x%x, i = %d\n", tda18271_gain_taper[i].val, i); regs[R_EP2] &= ~0x1f; /* clear gain taper bits */ @@ -527,7 +535,7 @@ static int tda18271_tune(struct dvb_frontend *fe, break; i++; } - dprintk(2, "rf cal = 0x%x, i = %d\n", tda18271_rf_cal[i].val, i); + dbg_map("rf cal = 0x%x, i = %d\n", tda18271_rf_cal[i].val, i); /* VHF_Low band only */ if (tda18271_rf_cal[i].rfmax != 0) { @@ -581,7 +589,7 @@ static int tda18271_tune(struct dvb_frontend *fe, break; i++; } - dprintk(2, "main pll, pd = 0x%x, d = 0x%x, i = %d\n", + dbg_map("main pll, pd = 0x%x, d = 0x%x, i = %d\n", tda18271_main_pll[i].pd, tda18271_main_pll[i].d, i); regs[R_MPD] = (0x7f & tda18271_main_pll[i].pd); @@ -717,7 +725,7 @@ static int tda18271_set_analog_params(struct dvb_frontend *fe, if (params->mode == V4L2_TUNER_RADIO) sgIF = 88; /* if frequency is 5.5 MHz */ - dprintk(1, "setting tda18271 to system %s\n", mode); + dbg_info("setting tda18271 to system %s\n", mode); return tda18271_tune(fe, sgIF * 62500, params->frequency * 62500, 0, std); @@ -764,7 +772,7 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, { struct tda18271_priv *priv = NULL; - dprintk(1, "@ %d-%04x\n", i2c_adapter_id(i2c), addr); + dbg_info("@ %d-%04x\n", i2c_adapter_id(i2c), addr); priv = kzalloc(sizeof(struct tda18271_priv), GFP_KERNEL); if (priv == NULL) return NULL; -- cgit v1.2.3-59-g8ed1b From aaeccba68a60eedee5fe90f9e1478367b1f97345 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 2 Dec 2007 11:03:57 -0300 Subject: V4L/DVB (6726): tda18271: set image rejection validity Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 11 ++++++++++- drivers/media/dvb/frontends/tda18271-priv.h | 1 + drivers/media/dvb/frontends/tda18271-tables.c | 8 ++++++++ 3 files changed, 19 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index 01de75e369ed..fee38c1657e1 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -578,7 +578,16 @@ static int tda18271_tune(struct dvb_frontend *fe, regs[R_EP4] &= ~0x80; /* turn this bit on only for fm */ - /* FIXME: image rejection validity EP5[2:0] */ + /* image rejection validity EP5[2:0] */ + i = 0; + while ((tda18271_ir_measure[i].rfmax * 1000) < freq) { + if (tda18271_ir_measure[i].rfmax == 0) + break; + i++; + } + dbg_map("ir measure, i = %d\n", i); + regs[R_EP5] &= ~0x07; + regs[R_EP5] |= tda18271_ir_measure[i].val; /* calculate MAIN PLL */ N = freq + ifc; diff --git a/drivers/media/dvb/frontends/tda18271-priv.h b/drivers/media/dvb/frontends/tda18271-priv.h index 71b4d7963699..a3158eb25594 100644 --- a/drivers/media/dvb/frontends/tda18271-priv.h +++ b/drivers/media/dvb/frontends/tda18271-priv.h @@ -84,6 +84,7 @@ extern struct tda18271_map tda18271_km[]; extern struct tda18271_map tda18271_rf_band[]; extern struct tda18271_map tda18271_gain_taper[]; extern struct tda18271_map tda18271_rf_cal[]; +extern struct tda18271_map tda18271_ir_measure[]; #endif /* __TDA18271_PRIV_H__ */ diff --git a/drivers/media/dvb/frontends/tda18271-tables.c b/drivers/media/dvb/frontends/tda18271-tables.c index a018b5140873..d65d3411e362 100644 --- a/drivers/media/dvb/frontends/tda18271-tables.c +++ b/drivers/media/dvb/frontends/tda18271-tables.c @@ -244,6 +244,14 @@ struct tda18271_map tda18271_rf_cal[] = { { .rfmax = 0, .val = 0x00 }, /* end */ }; +struct tda18271_map tda18271_ir_measure[] = { + { .rfmax = 30000, .val = 4}, + { .rfmax = 200000, .val = 5}, + { .rfmax = 600000, .val = 6}, + { .rfmax = 865000, .val = 7}, + { .rfmax = 0, .val = 0}, /* end */ +}; + /* * Overrides for Emacs so that we follow Linus's tabbing style. * --------------------------------------------------------------------------- -- cgit v1.2.3-59-g8ed1b From b5f3e1e153b60f7bc338cdd6eefacd59c2dfb375 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 2 Dec 2007 16:36:05 -0300 Subject: V4L/DVB (6727): tda18271: convert table lookup loops to functions Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 119 ++++++-------------------- drivers/media/dvb/frontends/tda18271-priv.h | 46 +++++----- drivers/media/dvb/frontends/tda18271-tables.c | 106 +++++++++++++++++++++-- 3 files changed, 149 insertions(+), 122 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index fee38c1657e1..5d3c4b0975f6 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -25,22 +25,10 @@ #include "tda18271.h" #include "tda18271-priv.h" -static int tda18271_debug; +int tda18271_debug; module_param_named(debug, tda18271_debug, int, 0644); MODULE_PARM_DESC(debug, "set debug level (info=1, map=2, reg=4 (or-able))"); -#define dprintk(level, fmt, arg...) do {\ - if (tda18271_debug & level) \ - printk(KERN_DEBUG "%s: " fmt, __FUNCTION__, ##arg); } while (0) - -#define DBG_INFO 1 -#define DBG_MAP 2 -#define DBG_REG 4 - -#define dbg_info(fmt, arg...) dprintk(DBG_INFO, fmt, ##arg) -#define dbg_map(fmt, arg...) dprintk(DBG_MAP, fmt, ##arg) -#define dbg_reg(fmt, arg...) dprintk(DBG_REG, fmt, ##arg) - /*---------------------------------------------------------------------*/ #define TDA18271_ANALOG 0 @@ -365,7 +353,7 @@ static int tda18271_tune(struct dvb_frontend *fe, struct tda18271_priv *priv = fe->tuner_priv; unsigned char *regs = priv->tda18271_regs; u32 div, N = 0; - int i; + u8 d, pd, val; tda18271_init(fe); @@ -374,16 +362,10 @@ static int tda18271_tune(struct dvb_frontend *fe, /* RF tracking filter calibration */ /* calculate BP_Filter */ - i = 0; - while ((tda18271_bp_filter[i].rfmax * 1000) < freq) { - if (tda18271_bp_filter[i + 1].rfmax == 0) - break; - i++; - } - dbg_map("bp filter = 0x%x, i = %d\n", tda18271_bp_filter[i].val, i); + tda18271_calc_bp_filter(&freq, &val); regs[R_EP1] &= ~0x07; /* clear bp filter bits */ - regs[R_EP1] |= tda18271_bp_filter[i].val; + regs[R_EP1] |= val; tda18271_write_regs(fe, R_EP1, 1); regs[R_EB4] &= 0x07; @@ -413,18 +395,11 @@ static int tda18271_tune(struct dvb_frontend *fe, break; } - i = 0; - while ((tda18271_cal_pll[i].lomax * 1000) < N) { - if (tda18271_cal_pll[i + 1].lomax == 0) - break; - i++; - } - dbg_map("cal pll, pd = 0x%x, d = 0x%x, i = %d\n", - tda18271_cal_pll[i].pd, tda18271_cal_pll[i].d, i); + tda18271_calc_cal_pll(&N, &pd, &d); - regs[R_CPD] = tda18271_cal_pll[i].pd; + regs[R_CPD] = pd; - div = ((tda18271_cal_pll[i].d * (N / 1000)) << 7) / 125; + div = ((d * (N / 1000)) << 7) / 125; regs[R_CD1] = 0xff & (div >> 16); regs[R_CD2] = 0xff & (div >> 8); regs[R_CD3] = 0xff & div; @@ -440,16 +415,9 @@ static int tda18271_tune(struct dvb_frontend *fe, break; } - i = 0; - while ((tda18271_main_pll[i].lomax * 1000) < N) { - if (tda18271_main_pll[i + 1].lomax == 0) - break; - i++; - } - dbg_map("main pll, pd = 0x%x, d = 0x%x, i = %d\n", - tda18271_main_pll[i].pd, tda18271_main_pll[i].d, i); + tda18271_calc_main_pll(&N, &pd, &d); - regs[R_MPD] = (0x7f & tda18271_main_pll[i].pd); + regs[R_MPD] = (0x7f & pd); switch (priv->mode) { case TDA18271_ANALOG: @@ -460,7 +428,7 @@ static int tda18271_tune(struct dvb_frontend *fe, break; } - div = ((tda18271_main_pll[i].d * (N / 1000)) << 7) / 125; + div = ((d * (N / 1000)) << 7) / 125; regs[R_MD1] = 0xff & (div >> 16); regs[R_MD2] = 0xff & (div >> 8); regs[R_MD3] = 0xff & div; @@ -469,42 +437,23 @@ static int tda18271_tune(struct dvb_frontend *fe, msleep(5); /* RF tracking filter calibration initialization */ /* search for K,M,CO for RF Calibration */ - i = 0; - while ((tda18271_km[i].rfmax * 1000) < freq) { - if (tda18271_km[i + 1].rfmax == 0) - break; - i++; - } - dbg_map("km = 0x%x, i = %d\n", tda18271_km[i].val, i); + tda18271_calc_km(&freq, &val); regs[R_EB13] &= 0x83; - regs[R_EB13] |= tda18271_km[i].val; + regs[R_EB13] |= val; tda18271_write_regs(fe, R_EB13, 1); /* search for RF_BAND */ - i = 0; - while ((tda18271_rf_band[i].rfmax * 1000) < freq) { - if (tda18271_rf_band[i + 1].rfmax == 0) - break; - i++; - } - dbg_map("rf band = 0x%x, i = %d\n", tda18271_rf_band[i].val, i); + tda18271_calc_rf_band(&freq, &val); regs[R_EP2] &= ~0xe0; /* clear rf band bits */ - regs[R_EP2] |= (tda18271_rf_band[i].val << 5); + regs[R_EP2] |= (val << 5); /* search for Gain_Taper */ - i = 0; - while ((tda18271_gain_taper[i].rfmax * 1000) < freq) { - if (tda18271_gain_taper[i + 1].rfmax == 0) - break; - i++; - } - dbg_map("gain taper = 0x%x, i = %d\n", - tda18271_gain_taper[i].val, i); + tda18271_calc_gain_taper(&freq, &val); regs[R_EP2] &= ~0x1f; /* clear gain taper bits */ - regs[R_EP2] |= tda18271_gain_taper[i].val; + regs[R_EP2] |= val; tda18271_write_regs(fe, R_EP2, 1); tda18271_write_regs(fe, R_EP1, 1); @@ -529,17 +478,11 @@ static int tda18271_tune(struct dvb_frontend *fe, tda18271_write_regs(fe, R_EP1, 1); /* RF tracking filer correction for VHF_Low band */ - i = 0; - while ((tda18271_rf_cal[i].rfmax * 1000) < freq) { - if (tda18271_rf_cal[i].rfmax == 0) - break; - i++; - } - dbg_map("rf cal = 0x%x, i = %d\n", tda18271_rf_cal[i].val, i); + tda18271_calc_rf_cal(&freq, &val); /* VHF_Low band only */ - if (tda18271_rf_cal[i].rfmax != 0) { - regs[R_EB14] = tda18271_rf_cal[i].val; + if (val != 0) { + regs[R_EB14] = val; tda18271_write_regs(fe, R_EB14, 1); } @@ -579,29 +522,17 @@ static int tda18271_tune(struct dvb_frontend *fe, regs[R_EP4] &= ~0x80; /* turn this bit on only for fm */ /* image rejection validity EP5[2:0] */ - i = 0; - while ((tda18271_ir_measure[i].rfmax * 1000) < freq) { - if (tda18271_ir_measure[i].rfmax == 0) - break; - i++; - } - dbg_map("ir measure, i = %d\n", i); + tda18271_calc_ir_measure(&freq, &val); + regs[R_EP5] &= ~0x07; - regs[R_EP5] |= tda18271_ir_measure[i].val; + regs[R_EP5] |= val; /* calculate MAIN PLL */ N = freq + ifc; - i = 0; - while ((tda18271_main_pll[i].lomax * 1000) < N) { - if (tda18271_main_pll[i + 1].lomax == 0) - break; - i++; - } - dbg_map("main pll, pd = 0x%x, d = 0x%x, i = %d\n", - tda18271_main_pll[i].pd, tda18271_main_pll[i].d, i); + tda18271_calc_main_pll(&N, &pd, &d); - regs[R_MPD] = (0x7f & tda18271_main_pll[i].pd); + regs[R_MPD] = (0x7f & pd); switch (priv->mode) { case TDA18271_ANALOG: regs[R_MPD] &= ~0x08; @@ -611,7 +542,7 @@ static int tda18271_tune(struct dvb_frontend *fe, break; } - div = ((tda18271_main_pll[i].d * (N / 1000)) << 7) / 125; + div = ((d * (N / 1000)) << 7) / 125; regs[R_MD1] = 0xff & (div >> 16); regs[R_MD2] = 0xff & (div >> 8); regs[R_MD3] = 0xff & div; diff --git a/drivers/media/dvb/frontends/tda18271-priv.h b/drivers/media/dvb/frontends/tda18271-priv.h index a3158eb25594..d56c2fe3efa2 100644 --- a/drivers/media/dvb/frontends/tda18271-priv.h +++ b/drivers/media/dvb/frontends/tda18271-priv.h @@ -21,6 +21,7 @@ #ifndef __TDA18271_PRIV_H__ #define __TDA18271_PRIV_H__ +#include #include #define R_ID 0x00 /* ID byte */ @@ -65,26 +66,31 @@ #define TDA18271_NUM_REGS 39 -struct tda18271_pll_map { - u32 lomax; - u8 pd; /* post div */ - u8 d; /* div */ -}; - -extern struct tda18271_pll_map tda18271_main_pll[]; -extern struct tda18271_pll_map tda18271_cal_pll[]; - -struct tda18271_map { - u32 rfmax; - u8 val; -}; - -extern struct tda18271_map tda18271_bp_filter[]; -extern struct tda18271_map tda18271_km[]; -extern struct tda18271_map tda18271_rf_band[]; -extern struct tda18271_map tda18271_gain_taper[]; -extern struct tda18271_map tda18271_rf_cal[]; -extern struct tda18271_map tda18271_ir_measure[]; +extern int tda18271_debug; + +#define dprintk(level, fmt, arg...) do {\ + if (tda18271_debug & level) \ + printk(KERN_DEBUG "%s: " fmt, __FUNCTION__, ##arg); } while (0) + +#define DBG_INFO 1 +#define DBG_MAP 2 +#define DBG_REG 4 + +#define dbg_info(fmt, arg...) dprintk(DBG_INFO, fmt, ##arg) +#define dbg_map(fmt, arg...) dprintk(DBG_MAP, fmt, ##arg) +#define dbg_reg(fmt, arg...) dprintk(DBG_REG, fmt, ##arg) + +/*---------------------------------------------------------------------*/ + +extern void tda18271_calc_cal_pll(u32 *freq, u8 *post_div, u8 *div); +extern void tda18271_calc_main_pll(u32 *freq, u8 *post_div, u8 *div); + +extern void tda18271_calc_bp_filter(u32 *freq, u8 *val); +extern void tda18271_calc_km(u32 *freq, u8 *val); +extern void tda18271_calc_rf_band(u32 *freq, u8 *val); +extern void tda18271_calc_gain_taper(u32 *freq, u8 *val); +extern void tda18271_calc_rf_cal(u32 *freq, u8 *val); +extern void tda18271_calc_ir_measure(u32 *freq, u8 *val); #endif /* __TDA18271_PRIV_H__ */ diff --git a/drivers/media/dvb/frontends/tda18271-tables.c b/drivers/media/dvb/frontends/tda18271-tables.c index d65d3411e362..65387bb059eb 100644 --- a/drivers/media/dvb/frontends/tda18271-tables.c +++ b/drivers/media/dvb/frontends/tda18271-tables.c @@ -20,7 +20,20 @@ #include "tda18271-priv.h" -struct tda18271_pll_map tda18271_main_pll[] = { +struct tda18271_pll_map { + u32 lomax; + u8 pd; /* post div */ + u8 d; /* div */ +}; + +struct tda18271_map { + u32 rfmax; + u8 val; +}; + +/*---------------------------------------------------------------------*/ + +static struct tda18271_pll_map tda18271_main_pll[] = { { .lomax = 32000, .pd = 0x5f, .d = 0xf0 }, { .lomax = 35000, .pd = 0x5e, .d = 0xe0 }, { .lomax = 37000, .pd = 0x5d, .d = 0xd0 }, @@ -64,7 +77,7 @@ struct tda18271_pll_map tda18271_main_pll[] = { { .lomax = 0, .pd = 0x00, .d = 0x00 }, /* end */ }; -struct tda18271_pll_map tda18271_cal_pll[] = { +static struct tda18271_pll_map tda18271_cal_pll[] = { { .lomax = 33000, .pd = 0xdd, .d = 0xd0 }, { .lomax = 36000, .pd = 0xdc, .d = 0xc0 }, { .lomax = 40000, .pd = 0xdb, .d = 0xb0 }, @@ -103,7 +116,7 @@ struct tda18271_pll_map tda18271_cal_pll[] = { { .lomax = 0, .pd = 0x00, .d = 0x00 }, /* end */ }; -struct tda18271_map tda18271_bp_filter[] = { +static struct tda18271_map tda18271_bp_filter[] = { { .rfmax = 62000, .val = 0x00 }, { .rfmax = 84000, .val = 0x01 }, { .rfmax = 100000, .val = 0x02 }, @@ -114,7 +127,7 @@ struct tda18271_map tda18271_bp_filter[] = { { .rfmax = 0, .val = 0x00 }, /* end */ }; -struct tda18271_map tda18271_km[] = { +static struct tda18271_map tda18271_km[] = { { .rfmax = 61100, .val = 0x74 }, { .rfmax = 350000, .val = 0x40 }, { .rfmax = 720000, .val = 0x30 }, @@ -122,7 +135,7 @@ struct tda18271_map tda18271_km[] = { { .rfmax = 0, .val = 0x00 }, /* end */ }; -struct tda18271_map tda18271_rf_band[] = { +static struct tda18271_map tda18271_rf_band[] = { { .rfmax = 47900, .val = 0x00 }, { .rfmax = 61100, .val = 0x01 }, /* { .rfmax = 152600, .val = 0x02 }, */ @@ -134,7 +147,7 @@ struct tda18271_map tda18271_rf_band[] = { { .rfmax = 0, .val = 0x00 }, /* end */ }; -struct tda18271_map tda18271_gain_taper[] = { +static struct tda18271_map tda18271_gain_taper[] = { { .rfmax = 45400, .val = 0x1f }, { .rfmax = 45800, .val = 0x1e }, { .rfmax = 46200, .val = 0x1d }, @@ -223,7 +236,7 @@ struct tda18271_map tda18271_gain_taper[] = { { .rfmax = 0, .val = 0x00 }, /* end */ }; -struct tda18271_map tda18271_rf_cal[] = { +static struct tda18271_map tda18271_rf_cal[] = { { .rfmax = 41000, .val = 0x1e }, { .rfmax = 43000, .val = 0x30 }, { .rfmax = 45000, .val = 0x43 }, @@ -244,7 +257,7 @@ struct tda18271_map tda18271_rf_cal[] = { { .rfmax = 0, .val = 0x00 }, /* end */ }; -struct tda18271_map tda18271_ir_measure[] = { +static struct tda18271_map tda18271_ir_measure[] = { { .rfmax = 30000, .val = 4}, { .rfmax = 200000, .val = 5}, { .rfmax = 600000, .val = 6}, @@ -252,6 +265,83 @@ struct tda18271_map tda18271_ir_measure[] = { { .rfmax = 0, .val = 0}, /* end */ }; +/*---------------------------------------------------------------------*/ + +static void tda18271_lookup_map(struct tda18271_map *map, + u32 *freq, u8 *val) +{ + int i = 0; + while ((map[i].rfmax * 1000) < *freq) { + if (map[i + 1].rfmax == 0) + break; + i++; + } + *val = map[i].val; +} + +static void tda18271_lookup_pll_map(struct tda18271_pll_map *map, + u32 *freq, u8 *post_div, u8 *div) +{ + int i = 0; + while ((map[i].lomax * 1000) < *freq) { + if (map[i + 1].lomax == 0) + break; + i++; + } + *post_div = map[i].pd; + *div = map[i].d; +} + +/*---------------------------------------------------------------------*/ + +void tda18271_calc_cal_pll(u32 *freq, u8 *post_div, u8 *div) +{ + tda18271_lookup_pll_map(tda18271_cal_pll, freq, post_div, div); + dbg_map("post div = 0x%02x, div = 0x%02x\n", *post_div, *div); +} + +void tda18271_calc_main_pll(u32 *freq, u8 *post_div, u8 *div) +{ + tda18271_lookup_pll_map(tda18271_main_pll, freq, post_div, div); + dbg_map("post div = 0x%02x, div = 0x%02x\n", *post_div, *div); +} + +void tda18271_calc_bp_filter(u32 *freq, u8 *val) +{ + tda18271_lookup_map(tda18271_bp_filter, freq, val); + dbg_map("0x%02x\n", *val); +} + +void tda18271_calc_km(u32 *freq, u8 *val) +{ + tda18271_lookup_map(tda18271_km, freq, val); + dbg_map("0x%02x\n", *val); +} + +void tda18271_calc_rf_band(u32 *freq, u8 *val) +{ + tda18271_lookup_map(tda18271_rf_band, freq, val); + dbg_map("0x%02x\n", *val); +} + +void tda18271_calc_gain_taper(u32 *freq, u8 *val) +{ + tda18271_lookup_map(tda18271_gain_taper, freq, val); + dbg_map("0x%02x\n", *val); +} + +void tda18271_calc_rf_cal(u32 *freq, u8 *val) +{ + tda18271_lookup_map(tda18271_rf_cal, freq, val); + dbg_map("0x%02x\n", *val); +} + +void tda18271_calc_ir_measure(u32 *freq, u8 *val) +{ + tda18271_lookup_map(tda18271_ir_measure, freq, val); + dbg_map("0x%02x\n", *val); +} + /* * Overrides for Emacs so that we follow Linus's tabbing style. * --------------------------------------------------------------------------- -- cgit v1.2.3-59-g8ed1b From 5d2bf930a2f4586a3e19318ed821a34193c4b7cd Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 2 Dec 2007 17:37:38 -0300 Subject: V4L/DVB (6728): tda18271: fix register dump format Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 32 +++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index 5d3c4b0975f6..e8f4ac2325da 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -72,22 +72,22 @@ static void tda18271_dump_regs(struct dvb_frontend *fe) unsigned char *regs = priv->tda18271_regs; dbg_reg("=== TDA18271 REG DUMP ===\n"); - dbg_reg("ID_BYTE = 0x%x\n", 0xff & regs[R_ID]); - dbg_reg("THERMO_BYTE = 0x%x\n", 0xff & regs[R_TM]); - dbg_reg("POWER_LEVEL_BYTE = 0x%x\n", 0xff & regs[R_PL]); - dbg_reg("EASY_PROG_BYTE_1 = 0x%x\n", 0xff & regs[R_EP1]); - dbg_reg("EASY_PROG_BYTE_2 = 0x%x\n", 0xff & regs[R_EP2]); - dbg_reg("EASY_PROG_BYTE_3 = 0x%x\n", 0xff & regs[R_EP3]); - dbg_reg("EASY_PROG_BYTE_4 = 0x%x\n", 0xff & regs[R_EP4]); - dbg_reg("EASY_PROG_BYTE_5 = 0x%x\n", 0xff & regs[R_EP5]); - dbg_reg("CAL_POST_DIV_BYTE = 0x%x\n", 0xff & regs[R_CPD]); - dbg_reg("CAL_DIV_BYTE_1 = 0x%x\n", 0xff & regs[R_CD1]); - dbg_reg("CAL_DIV_BYTE_2 = 0x%x\n", 0xff & regs[R_CD2]); - dbg_reg("CAL_DIV_BYTE_3 = 0x%x\n", 0xff & regs[R_CD3]); - dbg_reg("MAIN_POST_DIV_BYTE = 0x%x\n", 0xff & regs[R_MPD]); - dbg_reg("MAIN_DIV_BYTE_1 = 0x%x\n", 0xff & regs[R_MD1]); - dbg_reg("MAIN_DIV_BYTE_2 = 0x%x\n", 0xff & regs[R_MD2]); - dbg_reg("MAIN_DIV_BYTE_3 = 0x%x\n", 0xff & regs[R_MD3]); + dbg_reg("ID_BYTE = 0x%02x\n", 0xff & regs[R_ID]); + dbg_reg("THERMO_BYTE = 0x%02x\n", 0xff & regs[R_TM]); + dbg_reg("POWER_LEVEL_BYTE = 0x%02x\n", 0xff & regs[R_PL]); + dbg_reg("EASY_PROG_BYTE_1 = 0x%02x\n", 0xff & regs[R_EP1]); + dbg_reg("EASY_PROG_BYTE_2 = 0x%02x\n", 0xff & regs[R_EP2]); + dbg_reg("EASY_PROG_BYTE_3 = 0x%02x\n", 0xff & regs[R_EP3]); + dbg_reg("EASY_PROG_BYTE_4 = 0x%02x\n", 0xff & regs[R_EP4]); + dbg_reg("EASY_PROG_BYTE_5 = 0x%02x\n", 0xff & regs[R_EP5]); + dbg_reg("CAL_POST_DIV_BYTE = 0x%02x\n", 0xff & regs[R_CPD]); + dbg_reg("CAL_DIV_BYTE_1 = 0x%02x\n", 0xff & regs[R_CD1]); + dbg_reg("CAL_DIV_BYTE_2 = 0x%02x\n", 0xff & regs[R_CD2]); + dbg_reg("CAL_DIV_BYTE_3 = 0x%02x\n", 0xff & regs[R_CD3]); + dbg_reg("MAIN_POST_DIV_BYTE = 0x%02x\n", 0xff & regs[R_MPD]); + dbg_reg("MAIN_DIV_BYTE_1 = 0x%02x\n", 0xff & regs[R_MD1]); + dbg_reg("MAIN_DIV_BYTE_2 = 0x%02x\n", 0xff & regs[R_MD2]); + dbg_reg("MAIN_DIV_BYTE_3 = 0x%02x\n", 0xff & regs[R_MD3]); } static void tda18271_read_regs(struct dvb_frontend *fe) -- cgit v1.2.3-59-g8ed1b From e1ba33df0cbc6a7ab339dc093f37825775b9caca Mon Sep 17 00:00:00 2001 From: Richard Knutsson Date: Sun, 2 Dec 2007 14:47:01 -0300 Subject: V4L/DVB (6731): ivtv: Remove a invalid shadow-variable Remove the shadowing 'struct v4l2_chip_ident *chip', since it already exists and makes the if-statement useless. Signed-off-by: Richard Knutsson Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-ioctl.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index 0618fee24952..25b68843a289 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -673,11 +673,8 @@ static int ivtv_debug_ioctls(struct file *filp, unsigned int cmd, void *arg) chip->ident = V4L2_IDENT_NONE; chip->revision = 0; if (reg->match_type == V4L2_CHIP_MATCH_HOST) { - if (v4l2_chip_match_host(reg->match_type, reg->match_chip)) { - struct v4l2_chip_ident *chip = arg; - + if (v4l2_chip_match_host(reg->match_type, reg->match_chip)) chip->ident = itv->has_cx23415 ? V4L2_IDENT_CX23415 : V4L2_IDENT_CX23416; - } return 0; } if (reg->match_type == V4L2_CHIP_MATCH_I2C_DRIVER) -- cgit v1.2.3-59-g8ed1b From 863c86dd7e014e645207fd16f4e06bc223567984 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 3 Dec 2007 06:48:43 -0300 Subject: V4L/DVB (6732): dsbr100 violates DMA coherency rules Signed-off-by: Oliver Neukum Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/dsbr100.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c index 3bd07f7e3774..36c0e3651502 100644 --- a/drivers/media/radio/dsbr100.c +++ b/drivers/media/radio/dsbr100.c @@ -33,6 +33,9 @@ History: + Version 0.43: + Oliver Neukum: avoided DMA coherency issue + Version 0.42: Converted dsbr100 to use video_ioctl2 by Douglas Landgraf @@ -135,7 +138,7 @@ module_param(radio_nr, int, 0); struct dsbr100_device { struct usb_device *usbdev; struct video_device *videodev; - unsigned char transfer_buffer[TB_LEN]; + u8 *transfer_buffer; int curfreq; int stereo; int users; @@ -237,10 +240,7 @@ static void dsbr100_getstat(struct dsbr100_device *radio) /* handle unplugging of the device, release data structures if nothing keeps us from doing it. If something is still keeping us busy, the release callback of v4l will take care -of releasing it. stv680.c does not relase its private -data, so I don't do this here either. Checking out the -code I'd expect I better did that, but if there's a memory -leak here it's tiny (~50 bytes per disconnect) */ +of releasing it. */ static void usb_dsbr100_disconnect(struct usb_interface *intf) { struct dsbr100_device *radio = usb_get_intfdata(intf); @@ -250,6 +250,7 @@ static void usb_dsbr100_disconnect(struct usb_interface *intf) video_unregister_device(radio->videodev); radio->videodev = NULL; if (radio->users) { + kfree(radio->transfer_buffer); kfree(radio); } else { radio->removed = 1; @@ -425,6 +426,7 @@ static int usb_dsbr100_close(struct inode *inode, struct file *file) return -ENODEV; radio->users = 0; if (radio->removed) { + kfree(radio->transfer_buffer); kfree(radio); } return 0; @@ -471,7 +473,12 @@ static int usb_dsbr100_probe(struct usb_interface *intf, if (!(radio = kmalloc(sizeof(struct dsbr100_device), GFP_KERNEL))) return -ENOMEM; + if (!(radio->transfer_buffer = kmalloc(TB_LEN, GFP_KERNEL))) { + kfree(radio); + return -ENOMEM; + } if (!(radio->videodev = video_device_alloc())) { + kfree(radio->transfer_buffer); kfree(radio); return -ENOMEM; } @@ -485,6 +492,7 @@ static int usb_dsbr100_probe(struct usb_interface *intf, if (video_register_device(radio->videodev, VFL_TYPE_RADIO,radio_nr)) { warn("Could not register video device"); video_device_release(radio->videodev); + kfree(radio->transfer_buffer); kfree(radio); return -EIO; } -- cgit v1.2.3-59-g8ed1b From 8f61ae2f4ff698c7cd83b1f17b1ca2ecfc7f0696 Mon Sep 17 00:00:00 2001 From: Douglas Schilling Landgraf Date: Fri, 7 Dec 2007 17:09:53 -0300 Subject: V4L/DVB (6734): Converted saa7134-video to use video_ioctl2 Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-video.c | 1212 ++++++++++++++------------- 1 file changed, 610 insertions(+), 602 deletions(-) diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c index 9c160b2bca3d..954542e5c99f 100644 --- a/drivers/media/video/saa7134/saa7134-video.c +++ b/drivers/media/video/saa7134/saa7134-video.c @@ -1119,8 +1119,11 @@ static struct videobuf_queue_ops video_qops = { /* ------------------------------------------------------------------ */ -static int get_control(struct saa7134_dev *dev, struct v4l2_control *c) +static int vidioc_g_ctrl(struct file *file, void *priv, + struct v4l2_control *c) { + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; const struct v4l2_queryctrl* ctrl; ctrl = ctrl_by_id(c->id); @@ -1166,13 +1169,16 @@ static int get_control(struct saa7134_dev *dev, struct v4l2_control *c) return 0; } -static int set_control(struct saa7134_dev *dev, struct saa7134_fh *fh, - struct v4l2_control *c) +static int vidioc_s_ctrl(struct file *file, void *f, + struct v4l2_control *c) { const struct v4l2_queryctrl* ctrl; + struct saa7134_fh *fh = f; + struct saa7134_dev *dev = fh->dev; unsigned long flags; int restart_overlay = 0; + mutex_lock(&dev->lock); ctrl = ctrl_by_id(c->id); if (NULL == ctrl) return -EINVAL; @@ -1255,6 +1261,7 @@ static int set_control(struct saa7134_dev *dev, struct saa7134_fh *fh, break; } default: + mutex_unlock(&dev->lock); return -EINVAL; } if (restart_overlay && fh && res_check(fh, RESOURCE_OVERLAY)) { @@ -1263,6 +1270,7 @@ static int set_control(struct saa7134_dev *dev, struct saa7134_fh *fh, start_preview(dev,fh); spin_unlock_irqrestore(&dev->slock,flags); } + mutex_unlock(&dev->lock); return 0; } @@ -1502,9 +1510,12 @@ static void saa7134_vbi_fmt(struct saa7134_dev *dev, struct v4l2_format *f) } -static int saa7134_g_fmt(struct saa7134_dev *dev, struct saa7134_fh *fh, - struct v4l2_format *f) +static int vidioc_g_fmt_cap(struct file *file, void *priv, + struct v4l2_format *f) { + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + switch (f->type) { case V4L2_BUF_TYPE_VIDEO_CAPTURE: memset(&f->fmt.pix,0,sizeof(f->fmt.pix)); @@ -1532,9 +1543,11 @@ static int saa7134_g_fmt(struct saa7134_dev *dev, struct saa7134_fh *fh, } } -static int saa7134_try_fmt(struct saa7134_dev *dev, struct saa7134_fh *fh, - struct v4l2_format *f) +static int vidioc_try_fmt_cap(struct file *file, void *priv, + struct v4l2_format *f) { + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; int err; switch (f->type) { @@ -1602,15 +1615,17 @@ static int saa7134_try_fmt(struct saa7134_dev *dev, struct saa7134_fh *fh, } } -static int saa7134_s_fmt(struct saa7134_dev *dev, struct saa7134_fh *fh, - struct v4l2_format *f) +static int vidioc_s_fmt_cap(struct file *file, void *priv, + struct v4l2_format *f) { + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; unsigned long flags; int err; switch (f->type) { case V4L2_BUF_TYPE_VIDEO_CAPTURE: - err = saa7134_try_fmt(dev,fh,f); + err = vidioc_try_fmt_cap(file, priv, f); if (0 != err) return err; @@ -1655,682 +1670,625 @@ static int saa7134_s_fmt(struct saa7134_dev *dev, struct saa7134_fh *fh, } } -int saa7134_common_ioctl(struct saa7134_dev *dev, - unsigned int cmd, void *arg) +static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) { - int err; + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; - switch (cmd) { - case VIDIOC_QUERYCTRL: - { - const struct v4l2_queryctrl *ctrl; - struct v4l2_queryctrl *c = arg; + *i = dev->ctl_input; + return 0; +} - if ((c->id < V4L2_CID_BASE || - c->id >= V4L2_CID_LASTP1) && - (c->id < V4L2_CID_PRIVATE_BASE || - c->id >= V4L2_CID_PRIVATE_LASTP1)) - return -EINVAL; - ctrl = ctrl_by_id(c->id); - *c = (NULL != ctrl) ? *ctrl : no_ctrl; - return 0; - } - case VIDIOC_G_CTRL: - return get_control(dev,arg); - case VIDIOC_S_CTRL: - { - mutex_lock(&dev->lock); - err = set_control(dev,NULL,arg); - mutex_unlock(&dev->lock); - return err; - } - /* --- input switching --------------------------------------- */ - case VIDIOC_ENUMINPUT: - { - struct v4l2_input *i = arg; - unsigned int n; +static int vidioc_s_input(struct file *file, void *priv, unsigned int i) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; - n = i->index; - if (n >= SAA7134_INPUT_MAX) - return -EINVAL; - if (NULL == card_in(dev,i->index).name) - return -EINVAL; - memset(i,0,sizeof(*i)); - i->index = n; - i->type = V4L2_INPUT_TYPE_CAMERA; - strcpy(i->name,card_in(dev,n).name); - if (card_in(dev,n).tv) - i->type = V4L2_INPUT_TYPE_TUNER; - i->audioset = 1; - if (n == dev->ctl_input) { - int v1 = saa_readb(SAA7134_STATUS_VIDEO1); - int v2 = saa_readb(SAA7134_STATUS_VIDEO2); - - if (0 != (v1 & 0x40)) - i->status |= V4L2_IN_ST_NO_H_LOCK; - if (0 != (v2 & 0x40)) - i->status |= V4L2_IN_ST_NO_SYNC; - if (0 != (v2 & 0x0e)) - i->status |= V4L2_IN_ST_MACROVISION; - } - for (n = 0; n < TVNORMS; n++) - i->std |= tvnorms[n].id; - return 0; - } - case VIDIOC_G_INPUT: - { - int *i = arg; - *i = dev->ctl_input; - return 0; - } - case VIDIOC_S_INPUT: - { - int *i = arg; + if (i < 0 || i >= SAA7134_INPUT_MAX) + return -EINVAL; + if (NULL == card_in(dev, i).name) + return -EINVAL; + mutex_lock(&dev->lock); + video_mux(dev, i); + mutex_unlock(&dev->lock); + return 0; +} - if (*i < 0 || *i >= SAA7134_INPUT_MAX) - return -EINVAL; - if (NULL == card_in(dev,*i).name) - return -EINVAL; - mutex_lock(&dev->lock); - video_mux(dev,*i); - mutex_unlock(&dev->lock); - return 0; - } +static int vidioc_queryctrl(struct file *file, void *priv, + struct v4l2_queryctrl *c) +{ + const struct v4l2_queryctrl *ctrl; - } + if ((c->id < V4L2_CID_BASE || + c->id >= V4L2_CID_LASTP1) && + (c->id < V4L2_CID_PRIVATE_BASE || + c->id >= V4L2_CID_PRIVATE_LASTP1)) + return -EINVAL; + ctrl = ctrl_by_id(c->id); + *c = (NULL != ctrl) ? *ctrl : no_ctrl; return 0; } -EXPORT_SYMBOL(saa7134_common_ioctl); -/* - * This function is _not_ called directly, but from - * video_generic_ioctl (and maybe others). userspace - * copying is done already, arg is a kernel pointer. - */ -static int video_do_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, void *arg) +static int vidioc_enum_input(struct file *file, void *priv, + struct v4l2_input *i) { - struct saa7134_fh *fh = file->private_data; + struct saa7134_fh *fh = priv; struct saa7134_dev *dev = fh->dev; - unsigned long flags; - int err; + unsigned int n; - if (video_debug > 1) - v4l_print_ioctl(dev->name,cmd); + n = i->index; + if (n >= SAA7134_INPUT_MAX) + return -EINVAL; + if (NULL == card_in(dev, i->index).name) + return -EINVAL; + memset(i, 0, sizeof(*i)); + i->index = n; + i->type = V4L2_INPUT_TYPE_CAMERA; + strcpy(i->name, card_in(dev, n).name); + if (card_in(dev, n).tv) + i->type = V4L2_INPUT_TYPE_TUNER; + i->audioset = 1; + if (n == dev->ctl_input) { + int v1 = saa_readb(SAA7134_STATUS_VIDEO1); + int v2 = saa_readb(SAA7134_STATUS_VIDEO2); + + if (0 != (v1 & 0x40)) + i->status |= V4L2_IN_ST_NO_H_LOCK; + if (0 != (v2 & 0x40)) + i->status |= V4L2_IN_ST_NO_SYNC; + if (0 != (v2 & 0x0e)) + i->status |= V4L2_IN_ST_MACROVISION; + } + for (n = 0; n < TVNORMS; n++) + i->std |= tvnorms[n].id; + return 0; +} - switch (cmd) { - case VIDIOC_S_CTRL: - case VIDIOC_S_STD: - case VIDIOC_S_INPUT: - case VIDIOC_S_TUNER: - case VIDIOC_S_FREQUENCY: - err = v4l2_prio_check(&dev->prio,&fh->prio); - if (0 != err) - return err; - } +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; - switch (cmd) { - case VIDIOC_QUERYCAP: - { - struct v4l2_capability *cap = arg; - unsigned int tuner_type = dev->tuner_type; - - memset(cap,0,sizeof(*cap)); - strcpy(cap->driver, "saa7134"); - strlcpy(cap->card, saa7134_boards[dev->board].name, - sizeof(cap->card)); - sprintf(cap->bus_info,"PCI:%s",pci_name(dev->pci)); - cap->version = SAA7134_VERSION_CODE; - cap->capabilities = - V4L2_CAP_VIDEO_CAPTURE | - V4L2_CAP_VBI_CAPTURE | - V4L2_CAP_READWRITE | - V4L2_CAP_STREAMING | - V4L2_CAP_TUNER; - if (saa7134_no_overlay <= 0) { - cap->capabilities |= V4L2_CAP_VIDEO_OVERLAY; - } + unsigned int tuner_type = dev->tuner_type; + + memset(cap, 0, sizeof(*cap)); + strcpy(cap->driver, "saa7134"); + strlcpy(cap->card, saa7134_boards[dev->board].name, + sizeof(cap->card)); + sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci)); + cap->version = SAA7134_VERSION_CODE; + cap->capabilities = + V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_VBI_CAPTURE | + V4L2_CAP_READWRITE | + V4L2_CAP_STREAMING | + V4L2_CAP_TUNER; + if (saa7134_no_overlay <= 0) + cap->capabilities |= V4L2_CAP_VIDEO_OVERLAY; + + if ((tuner_type == TUNER_ABSENT) || (tuner_type == UNSET)) + cap->capabilities &= ~V4L2_CAP_TUNER; + return 0; +} - if ((tuner_type == TUNER_ABSENT) || (tuner_type == UNSET)) - cap->capabilities &= ~V4L2_CAP_TUNER; +static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id * id) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + unsigned long flags; + unsigned int i; + v4l2_std_id fixup; - return 0; + for (i = 0; i < TVNORMS; i++) + if (*id == tvnorms[i].id) + break; + if (i == TVNORMS) + for (i = 0; i < TVNORMS; i++) + if (*id & tvnorms[i].id) + break; + if (i == TVNORMS) + return -EINVAL; + if ((*id & V4L2_STD_SECAM) && (secam[0] != '-')) { + if (secam[0] == 'L' || secam[0] == 'l') { + if (secam[1] == 'C' || secam[1] == 'c') + fixup = V4L2_STD_SECAM_LC; + else + fixup = V4L2_STD_SECAM_L; + } else { + if (secam[0] == 'D' || secam[0] == 'd') + fixup = V4L2_STD_SECAM_DK; + else + fixup = V4L2_STD_SECAM; + } + for (i = 0; i < TVNORMS; i++) + if (fixup == tvnorms[i].id) + break; } + mutex_lock(&dev->lock); + if (res_check(fh, RESOURCE_OVERLAY)) { + spin_lock_irqsave(&dev->slock, flags); + stop_preview(dev, fh); + spin_unlock_irqrestore(&dev->slock, flags); + + set_tvnorm(dev, &tvnorms[i]); + + spin_lock_irqsave(&dev->slock, flags); + start_preview(dev, fh); + spin_unlock_irqrestore(&dev->slock, flags); + } else + set_tvnorm(dev, &tvnorms[i]); + saa7134_tvaudio_do_scan(dev); + mutex_unlock(&dev->lock); + return 0; +} - /* --- tv standards ------------------------------------------ */ - case VIDIOC_ENUMSTD: - { - struct v4l2_standard *e = arg; - unsigned int i; +static int vidioc_cropcap(struct file *file, void *priv, + struct v4l2_cropcap *cap) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; - i = e->index; - if (i >= TVNORMS) - return -EINVAL; - err = v4l2_video_std_construct(e, tvnorms[e->index].id, - tvnorms[e->index].name); - e->index = i; - if (err < 0) - return err; - return 0; + if (cap->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && + cap->type != V4L2_BUF_TYPE_VIDEO_OVERLAY) + return -EINVAL; + cap->bounds = dev->crop_bounds; + cap->defrect = dev->crop_defrect; + cap->pixelaspect.numerator = 1; + cap->pixelaspect.denominator = 1; + if (dev->tvnorm->id & V4L2_STD_525_60) { + cap->pixelaspect.numerator = 11; + cap->pixelaspect.denominator = 10; + } + if (dev->tvnorm->id & V4L2_STD_625_50) { + cap->pixelaspect.numerator = 54; + cap->pixelaspect.denominator = 59; } - case VIDIOC_G_STD: - { - v4l2_std_id *id = arg; + return 0; +} - *id = dev->tvnorm->id; - return 0; - } - case VIDIOC_S_STD: - { - v4l2_std_id *id = arg; - unsigned int i; - v4l2_std_id fixup; +static int vidioc_g_tuner(struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + int n; - for (i = 0; i < TVNORMS; i++) - if (*id == tvnorms[i].id) - break; - if (i == TVNORMS) - for (i = 0; i < TVNORMS; i++) - if (*id & tvnorms[i].id) - break; - if (i == TVNORMS) - return -EINVAL; - if ((*id & V4L2_STD_SECAM) && (secam[0] != '-')) { - if (secam[0] == 'L' || secam[0] == 'l') { - if (secam[1] == 'C' || secam[1] == 'c') - fixup = V4L2_STD_SECAM_LC; - else - fixup = V4L2_STD_SECAM_L; - } else { - if (secam[0] == 'D' || secam[0] == 'd') - fixup = V4L2_STD_SECAM_DK; - else - fixup = V4L2_STD_SECAM; - } - for (i = 0; i < TVNORMS; i++) - if (fixup == tvnorms[i].id) - break; - } - mutex_lock(&dev->lock); - if (res_check(fh, RESOURCE_OVERLAY)) { - spin_lock_irqsave(&dev->slock,flags); - stop_preview(dev,fh); - spin_unlock_irqrestore(&dev->slock, flags); + if (0 != t->index) + return -EINVAL; + memset(t, 0, sizeof(*t)); + for (n = 0; n < SAA7134_INPUT_MAX; n++) + if (card_in(dev, n).tv) + break; + if (NULL != card_in(dev, n).name) { + strcpy(t->name, "Television"); + t->type = V4L2_TUNER_ANALOG_TV; + t->capability = V4L2_TUNER_CAP_NORM | + V4L2_TUNER_CAP_STEREO | + V4L2_TUNER_CAP_LANG1 | + V4L2_TUNER_CAP_LANG2; + t->rangehigh = 0xffffffffUL; + t->rxsubchans = saa7134_tvaudio_getstereo(dev); + t->audmode = saa7134_tvaudio_rx2mode(t->rxsubchans); + } + if (0 != (saa_readb(SAA7134_STATUS_VIDEO1) & 0x03)) + t->signal = 0xffff; + return 0; +} - set_tvnorm(dev,&tvnorms[i]); +static int vidioc_s_tuner(struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + int rx, mode; - spin_lock_irqsave(&dev->slock, flags); - start_preview(dev,fh); - spin_unlock_irqrestore(&dev->slock,flags); - } else - set_tvnorm(dev,&tvnorms[i]); - saa7134_tvaudio_do_scan(dev); - mutex_unlock(&dev->lock); - return 0; + mode = dev->thread.mode; + if (UNSET == mode) { + rx = saa7134_tvaudio_getstereo(dev); + mode = saa7134_tvaudio_rx2mode(t->rxsubchans); } + if (mode != t->audmode) + dev->thread.mode = t->audmode; + return 0; +} - case VIDIOC_CROPCAP: - { - struct v4l2_cropcap *cap = arg; +static int vidioc_g_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; - if (cap->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && - cap->type != V4L2_BUF_TYPE_VIDEO_OVERLAY) - return -EINVAL; - cap->bounds = dev->crop_bounds; - cap->defrect = dev->crop_defrect; - cap->pixelaspect.numerator = 1; - cap->pixelaspect.denominator = 1; - if (dev->tvnorm->id & V4L2_STD_525_60) { - cap->pixelaspect.numerator = 11; - cap->pixelaspect.denominator = 10; - } - if (dev->tvnorm->id & V4L2_STD_625_50) { - cap->pixelaspect.numerator = 54; - cap->pixelaspect.denominator = 59; - } - return 0; - } + memset(f, 0, sizeof(*f)); + f->type = fh->radio ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; + f->frequency = dev->ctl_freq; + return 0; +} - case VIDIOC_G_CROP: - { - struct v4l2_crop * crop = arg; +static int vidioc_s_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; - if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && - crop->type != V4L2_BUF_TYPE_VIDEO_OVERLAY) - return -EINVAL; - crop->c = dev->crop_current; - return 0; - } - case VIDIOC_S_CROP: - { - struct v4l2_crop *crop = arg; - struct v4l2_rect *b = &dev->crop_bounds; + if (0 != f->tuner) + return -EINVAL; + if (0 == fh->radio && V4L2_TUNER_ANALOG_TV != f->type) + return -EINVAL; + if (1 == fh->radio && V4L2_TUNER_RADIO != f->type) + return -EINVAL; + mutex_lock(&dev->lock); + dev->ctl_freq = f->frequency; - if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && - crop->type != V4L2_BUF_TYPE_VIDEO_OVERLAY) - return -EINVAL; - if (crop->c.height < 0) - return -EINVAL; - if (crop->c.width < 0) - return -EINVAL; + saa7134_i2c_call_clients(dev, VIDIOC_S_FREQUENCY, f); - if (res_locked(fh->dev,RESOURCE_OVERLAY)) - return -EBUSY; - if (res_locked(fh->dev,RESOURCE_VIDEO)) - return -EBUSY; + saa7134_tvaudio_do_scan(dev); + mutex_unlock(&dev->lock); + return 0; +} - if (crop->c.top < b->top) - crop->c.top = b->top; - if (crop->c.top > b->top + b->height) - crop->c.top = b->top + b->height; - if (crop->c.height > b->top - crop->c.top + b->height) - crop->c.height = b->top - crop->c.top + b->height; - - if (crop->c.left < b->left) - crop->c.left = b->left; - if (crop->c.left > b->left + b->width) - crop->c.left = b->left + b->width; - if (crop->c.width > b->left - crop->c.left + b->width) - crop->c.width = b->left - crop->c.left + b->width; - - dev->crop_current = crop->c; - return 0; - } +static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a) +{ + memset(a, 0, sizeof(*a)); + strcpy(a->name, "audio"); + return 0; +} - /* --- tuner ioctls ------------------------------------------ */ - case VIDIOC_G_TUNER: - { - struct v4l2_tuner *t = arg; - int n; +static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a) +{ + return 0; +} - if (0 != t->index) - return -EINVAL; - memset(t,0,sizeof(*t)); - for (n = 0; n < SAA7134_INPUT_MAX; n++) - if (card_in(dev,n).tv) - break; - if (NULL != card_in(dev,n).name) { - strcpy(t->name, "Television"); - t->type = V4L2_TUNER_ANALOG_TV; - t->capability = V4L2_TUNER_CAP_NORM | - V4L2_TUNER_CAP_STEREO | - V4L2_TUNER_CAP_LANG1 | - V4L2_TUNER_CAP_LANG2; - t->rangehigh = 0xffffffffUL; - t->rxsubchans = saa7134_tvaudio_getstereo(dev); - t->audmode = saa7134_tvaudio_rx2mode(t->rxsubchans); - } - if (0 != (saa_readb(SAA7134_STATUS_VIDEO1) & 0x03)) - t->signal = 0xffff; - return 0; - } - case VIDIOC_S_TUNER: - { - struct v4l2_tuner *t = arg; - int rx,mode; +static int vidioc_streamon(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + int res = saa7134_resource(fh); - mode = dev->thread.mode; - if (UNSET == mode) { - rx = saa7134_tvaudio_getstereo(dev); - mode = saa7134_tvaudio_rx2mode(t->rxsubchans); - } - if (mode != t->audmode) { - dev->thread.mode = t->audmode; - } - return 0; - } - case VIDIOC_G_FREQUENCY: - { - struct v4l2_frequency *f = arg; + if (!res_get(dev, fh, res)) + return -EBUSY; - memset(f,0,sizeof(*f)); - f->type = fh->radio ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; - f->frequency = dev->ctl_freq; - return 0; - } - case VIDIOC_S_FREQUENCY: - { - struct v4l2_frequency *f = arg; + return videobuf_streamon(saa7134_queue(fh)); +} - if (0 != f->tuner) - return -EINVAL; - if (0 == fh->radio && V4L2_TUNER_ANALOG_TV != f->type) - return -EINVAL; - if (1 == fh->radio && V4L2_TUNER_RADIO != f->type) - return -EINVAL; - mutex_lock(&dev->lock); - dev->ctl_freq = f->frequency; +static int vidioc_streamoff(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + int err; + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + int res = saa7134_resource(fh); - saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,f); + err = videobuf_streamoff(saa7134_queue(fh)); + if (err < 0) + return err; + res_free(dev, fh, res); + return 0; +} - saa7134_tvaudio_do_scan(dev); - mutex_unlock(&dev->lock); - return 0; - } +static int vidioc_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *p) +{ + struct saa7134_fh *fh = priv; + return videobuf_reqbufs(saa7134_queue(fh), p); +} - /* --- control ioctls ---------------------------------------- */ - case VIDIOC_ENUMINPUT: - case VIDIOC_G_INPUT: - case VIDIOC_S_INPUT: - case VIDIOC_QUERYCTRL: - case VIDIOC_G_CTRL: - case VIDIOC_S_CTRL: - return saa7134_common_ioctl(dev, cmd, arg); +static int vidioc_s_crop(struct file *file, void *f, struct v4l2_crop *crop) +{ + struct saa7134_fh *fh = f; + struct saa7134_dev *dev = fh->dev; + struct v4l2_rect *b = &dev->crop_bounds; - case VIDIOC_G_AUDIO: - { - struct v4l2_audio *a = arg; + if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && + crop->type != V4L2_BUF_TYPE_VIDEO_OVERLAY) + return -EINVAL; + if (crop->c.height < 0) + return -EINVAL; + if (crop->c.width < 0) + return -EINVAL; - memset(a,0,sizeof(*a)); - strcpy(a->name,"audio"); - return 0; - } - case VIDIOC_S_AUDIO: - return 0; - case VIDIOC_G_PARM: - { - struct v4l2_captureparm *parm = arg; - memset(parm,0,sizeof(*parm)); - return 0; - } + if (res_locked(fh->dev, RESOURCE_OVERLAY)) + return -EBUSY; + if (res_locked(fh->dev, RESOURCE_VIDEO)) + return -EBUSY; + + if (crop->c.top < b->top) + crop->c.top = b->top; + if (crop->c.top > b->top + b->height) + crop->c.top = b->top + b->height; + if (crop->c.height > b->top - crop->c.top + b->height) + crop->c.height = b->top - crop->c.top + b->height; + + if (crop->c.left < b->left) + crop->c.left = b->left; + if (crop->c.left > b->left + b->width) + crop->c.left = b->left + b->width; + if (crop->c.width > b->left - crop->c.left + b->width) + crop->c.width = b->left - crop->c.left + b->width; + + dev->crop_current = crop->c; + return 0; +} - case VIDIOC_G_PRIORITY: - { - enum v4l2_priority *p = arg; +static int vidioc_g_crop(struct file *file, void *f, struct v4l2_crop *crop) +{ + struct saa7134_fh *fh = f; + struct saa7134_dev *dev = fh->dev; - *p = v4l2_prio_max(&dev->prio); - return 0; - } - case VIDIOC_S_PRIORITY: - { - enum v4l2_priority *prio = arg; + if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && + crop->type != V4L2_BUF_TYPE_VIDEO_OVERLAY) + return -EINVAL; + crop->c = dev->crop_current; + return 0; +} - return v4l2_prio_change(&dev->prio, &fh->prio, *prio); - } +static int vidioc_g_parm(struct file *file, void *fh, + struct v4l2_streamparm *parm) +{ + memset(parm, 0, sizeof(*parm)); + return 0; +} - /* --- preview ioctls ---------------------------------------- */ - case VIDIOC_ENUM_FMT: - { - struct v4l2_fmtdesc *f = arg; - enum v4l2_buf_type type; - unsigned int index; - - index = f->index; - type = f->type; - switch (type) { - case V4L2_BUF_TYPE_VIDEO_CAPTURE: - case V4L2_BUF_TYPE_VIDEO_OVERLAY: - if (saa7134_no_overlay > 0) { - printk ("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); - return -EINVAL; - } - if (index >= FORMATS) - return -EINVAL; - if (f->type == V4L2_BUF_TYPE_VIDEO_OVERLAY && - formats[index].planar) - return -EINVAL; - memset(f,0,sizeof(*f)); - f->index = index; - f->type = type; - strlcpy(f->description,formats[index].name,sizeof(f->description)); - f->pixelformat = formats[index].fourcc; - break; - case V4L2_BUF_TYPE_VBI_CAPTURE: - if (0 != index) - return -EINVAL; - memset(f,0,sizeof(*f)); - f->index = index; - f->type = type; - f->pixelformat = V4L2_PIX_FMT_GREY; - strcpy(f->description,"vbi data"); - break; - default: - return -EINVAL; - } - return 0; - } - case VIDIOC_G_FBUF: - { - struct v4l2_framebuffer *fb = arg; +static int vidioc_g_priority(struct file *file, void *f, enum v4l2_priority *p) +{ + struct saa7134_fh *fh = f; + struct saa7134_dev *dev = fh->dev; - *fb = dev->ovbuf; - fb->capability = V4L2_FBUF_CAP_LIST_CLIPPING; - return 0; - } - case VIDIOC_S_FBUF: - { - struct v4l2_framebuffer *fb = arg; - struct saa7134_format *fmt; + *p = v4l2_prio_max(&dev->prio); + return 0; +} - if(!capable(CAP_SYS_ADMIN) && - !capable(CAP_SYS_RAWIO)) - return -EPERM; +static int vidioc_s_priority(struct file *file, void *f, + enum v4l2_priority prio) +{ + struct saa7134_fh *fh = f; + struct saa7134_dev *dev = fh->dev; - /* check args */ - fmt = format_by_fourcc(fb->fmt.pixelformat); - if (NULL == fmt) - return -EINVAL; + return v4l2_prio_change(&dev->prio, &fh->prio, prio); +} - /* ok, accept it */ - dev->ovbuf = *fb; - dev->ovfmt = fmt; - if (0 == dev->ovbuf.fmt.bytesperline) - dev->ovbuf.fmt.bytesperline = - dev->ovbuf.fmt.width*fmt->depth/8; - return 0; - } - case VIDIOC_OVERLAY: - { - int *on = arg; +static int vidioc_g_fbuf(struct file *file, void *f, + struct v4l2_framebuffer *fb) +{ + struct saa7134_fh *fh = f; + struct saa7134_dev *dev = fh->dev; - if (*on) { - if (saa7134_no_overlay > 0) { - printk ("no_overlay\n"); - return -EINVAL; - } + *fb = dev->ovbuf; + fb->capability = V4L2_FBUF_CAP_LIST_CLIPPING; - if (!res_get(dev,fh,RESOURCE_OVERLAY)) - return -EBUSY; - spin_lock_irqsave(&dev->slock,flags); - start_preview(dev,fh); - spin_unlock_irqrestore(&dev->slock,flags); - } - if (!*on) { - if (!res_check(fh, RESOURCE_OVERLAY)) - return -EINVAL; - spin_lock_irqsave(&dev->slock,flags); - stop_preview(dev,fh); - spin_unlock_irqrestore(&dev->slock,flags); - res_free(dev,fh,RESOURCE_OVERLAY); - } - return 0; - } + return 0; +} - /* --- capture ioctls ---------------------------------------- */ - case VIDIOC_G_FMT: - { - struct v4l2_format *f = arg; - return saa7134_g_fmt(dev,fh,f); - } - case VIDIOC_S_FMT: - { - struct v4l2_format *f = arg; - return saa7134_s_fmt(dev,fh,f); - } - case VIDIOC_TRY_FMT: - { - struct v4l2_format *f = arg; - return saa7134_try_fmt(dev,fh,f); - } -#ifdef CONFIG_VIDEO_V4L1_COMPAT - case VIDIOCGMBUF: - return videobuf_cgmbuf(saa7134_queue(fh), arg, gbuffers); -#endif - case VIDIOC_REQBUFS: - return videobuf_reqbufs(saa7134_queue(fh),arg); +static int vidioc_s_fbuf(struct file *file, void *f, + struct v4l2_framebuffer *fb) +{ + struct saa7134_fh *fh = f; + struct saa7134_dev *dev = fh->dev; + struct saa7134_format *fmt; + + if (!capable(CAP_SYS_ADMIN) && + !capable(CAP_SYS_RAWIO)) + return -EPERM; - case VIDIOC_QUERYBUF: - return videobuf_querybuf(saa7134_queue(fh),arg); + /* check args */ + fmt = format_by_fourcc(fb->fmt.pixelformat); + if (NULL == fmt) + return -EINVAL; - case VIDIOC_QBUF: - return videobuf_qbuf(saa7134_queue(fh),arg); + /* ok, accept it */ + dev->ovbuf = *fb; + dev->ovfmt = fmt; + if (0 == dev->ovbuf.fmt.bytesperline) + dev->ovbuf.fmt.bytesperline = + dev->ovbuf.fmt.width*fmt->depth/8; + return 0; +} - case VIDIOC_DQBUF: - return videobuf_dqbuf(saa7134_queue(fh),arg, - file->f_flags & O_NONBLOCK); +static int vidioc_querybuf(struct file *file, void *priv, + struct v4l2_buffer *b) +{ + struct saa7134_fh *fh = priv; + return videobuf_querybuf(saa7134_queue(fh), b); +} - case VIDIOC_STREAMON: - { - int res = saa7134_resource(fh); +static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b) +{ + struct saa7134_fh *fh = priv; + return videobuf_qbuf(saa7134_queue(fh), b); +} + +static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) +{ + struct saa7134_fh *fh = priv; + return videobuf_dqbuf(saa7134_queue(fh), b, + file->f_flags & O_NONBLOCK); +} + +static int vidioc_overlay(struct file *file, void *f, unsigned int on) +{ + struct saa7134_fh *fh = f; + struct saa7134_dev *dev = fh->dev; + unsigned long flags; - if (!res_get(dev,fh,res)) + if (on) { + if (saa7134_no_overlay > 0) { + dprintk("no_overlay\n"); + return -EINVAL; + } + + if (!res_get(dev, fh, RESOURCE_OVERLAY)) return -EBUSY; - return videobuf_streamon(saa7134_queue(fh)); + spin_lock_irqsave(&dev->slock, flags); + start_preview(dev, fh); + spin_unlock_irqrestore(&dev->slock, flags); } - case VIDIOC_STREAMOFF: - { - int res = saa7134_resource(fh); - - err = videobuf_streamoff(saa7134_queue(fh)); - if (err < 0) - return err; - res_free(dev,fh,res); - return 0; + if (!on) { + if (!res_check(fh, RESOURCE_OVERLAY)) + return -EINVAL; + spin_lock_irqsave(&dev->slock, flags); + stop_preview(dev, fh); + spin_unlock_irqrestore(&dev->slock, flags); + res_free(dev, fh, RESOURCE_OVERLAY); } + return 0; +} + +static int vidioc_enum_fmt_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + enum v4l2_buf_type type; + unsigned int index; + index = f->index; + type = f->type; + switch (type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + case V4L2_BUF_TYPE_VIDEO_OVERLAY: + if (saa7134_no_overlay > 0) + return -EINVAL; + + if (index >= FORMATS) + return -EINVAL; + + if (f->type == V4L2_BUF_TYPE_VIDEO_OVERLAY && + formats[index].planar) + return -EINVAL; + memset(f, 0, sizeof(*f)); + f->index = index; + f->type = type; + strlcpy(f->description, formats[index].name, + sizeof(f->description)); + f->pixelformat = formats[index].fourcc; + break; + case V4L2_BUF_TYPE_VBI_CAPTURE: + if (0 != index) + return -EINVAL; + memset(f, 0, sizeof(*f)); + f->index = index; + f->type = type; + f->pixelformat = V4L2_PIX_FMT_GREY; + strcpy(f->description, "vbi data"); + break; default: - return v4l_compat_translate_ioctl(inode,file,cmd,arg, - video_do_ioctl); + return -EINVAL; } return 0; } -static int video_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +#ifdef CONFIG_VIDEO_V4L1_COMPAT +static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf) { - return video_usercopy(inode, file, cmd, arg, video_do_ioctl); + struct saa7134_fh *fh = file->private_data; + return videobuf_cgmbuf(saa7134_queue(fh), mbuf, 8); } +#endif -static int radio_do_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, void *arg) +static int radio_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) { struct saa7134_fh *fh = file->private_data; struct saa7134_dev *dev = fh->dev; - if (video_debug > 1) - v4l_print_ioctl(dev->name,cmd); - switch (cmd) { - case VIDIOC_QUERYCAP: - { - struct v4l2_capability *cap = arg; - - memset(cap,0,sizeof(*cap)); - strcpy(cap->driver, "saa7134"); - strlcpy(cap->card, saa7134_boards[dev->board].name, - sizeof(cap->card)); - sprintf(cap->bus_info,"PCI:%s",pci_name(dev->pci)); - cap->version = SAA7134_VERSION_CODE; - cap->capabilities = V4L2_CAP_TUNER; - return 0; - } - case VIDIOC_G_TUNER: - { - struct v4l2_tuner *t = arg; + memset(cap, 0, sizeof(*cap)); + strcpy(cap->driver, "saa7134"); + strlcpy(cap->card, saa7134_boards[dev->board].name, sizeof(cap->card)); + sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci)); + cap->version = SAA7134_VERSION_CODE; + cap->capabilities = V4L2_CAP_TUNER; + return 0; +} - if (0 != t->index) - return -EINVAL; +static int radio_g_tuner(struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct saa7134_fh *fh = file->private_data; + struct saa7134_dev *dev = fh->dev; - memset(t,0,sizeof(*t)); - strcpy(t->name, "Radio"); - t->type = V4L2_TUNER_RADIO; + if (0 != t->index) + return -EINVAL; - saa7134_i2c_call_clients(dev, VIDIOC_G_TUNER, t); - if (dev->input->amux == TV) { - t->signal = 0xf800 - ((saa_readb(0x581) & 0x1f) << 11); - t->rxsubchans = (saa_readb(0x529) & 0x08) ? - V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO; - } - return 0; + memset(t, 0, sizeof(*t)); + strcpy(t->name, "Radio"); + t->type = V4L2_TUNER_RADIO; + + saa7134_i2c_call_clients(dev, VIDIOC_G_TUNER, t); + if (dev->input->amux == TV) { + t->signal = 0xf800 - ((saa_readb(0x581) & 0x1f) << 11); + t->rxsubchans = (saa_readb(0x529) & 0x08) ? + V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO; } - case VIDIOC_S_TUNER: - { - struct v4l2_tuner *t = arg; + return 0; +} +static int radio_s_tuner(struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct saa7134_fh *fh = file->private_data; + struct saa7134_dev *dev = fh->dev; - if (0 != t->index) - return -EINVAL; + if (0 != t->index) + return -EINVAL; + + saa7134_i2c_call_clients(dev, VIDIOC_S_TUNER, t); + return 0; +} - saa7134_i2c_call_clients(dev,VIDIOC_S_TUNER,t); +static int radio_enum_input(struct file *file, void *priv, + struct v4l2_input *i) +{ + if (i->index != 0) + return -EINVAL; - return 0; - } - case VIDIOC_ENUMINPUT: - { - struct v4l2_input *i = arg; + strcpy(i->name, "Radio"); + i->type = V4L2_INPUT_TYPE_TUNER; - if (i->index != 0) - return -EINVAL; - strcpy(i->name,"Radio"); - i->type = V4L2_INPUT_TYPE_TUNER; - return 0; - } - case VIDIOC_G_INPUT: - { - int *i = arg; - *i = 0; - return 0; - } - case VIDIOC_G_AUDIO: - { - struct v4l2_audio *a = arg; + return 0; +} - memset(a,0,sizeof(*a)); - strcpy(a->name,"Radio"); - return 0; - } - case VIDIOC_G_STD: - { - v4l2_std_id *id = arg; - *id = 0; - return 0; - } - case VIDIOC_S_AUDIO: - case VIDIOC_S_INPUT: - case VIDIOC_S_STD: - return 0; +static int radio_g_input(struct file *filp, void *priv, unsigned int *i) +{ + *i = 0; + return 0; +} - case VIDIOC_QUERYCTRL: - { - const struct v4l2_queryctrl *ctrl; - struct v4l2_queryctrl *c = arg; +static int radio_g_audio(struct file *file, void *priv, + struct v4l2_audio *a) +{ + memset(a, 0, sizeof(*a)); + strcpy(a->name, "Radio"); + return 0; +} - if (c->id < V4L2_CID_BASE || - c->id >= V4L2_CID_LASTP1) - return -EINVAL; - if (c->id == V4L2_CID_AUDIO_MUTE) { - ctrl = ctrl_by_id(c->id); - *c = *ctrl; - } else - *c = no_ctrl; - return 0; - } +static int radio_s_audio(struct file *file, void *priv, + struct v4l2_audio *a) +{ + return 0; +} - case VIDIOC_G_CTRL: - case VIDIOC_S_CTRL: - case VIDIOC_G_FREQUENCY: - case VIDIOC_S_FREQUENCY: - return video_do_ioctl(inode,file,cmd,arg); +static int radio_s_input(struct file *filp, void *priv, unsigned int i) +{ + return 0; +} - default: - return v4l_compat_translate_ioctl(inode,file,cmd,arg, - radio_do_ioctl); - } +static int radio_s_std(struct file *file, void *fh, v4l2_std_id *norm) +{ return 0; } -static int radio_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static int radio_queryctrl(struct file *file, void *priv, + struct v4l2_queryctrl *c) { - return video_usercopy(inode, file, cmd, arg, radio_do_ioctl); + const struct v4l2_queryctrl *ctrl; + + if (c->id < V4L2_CID_BASE || + c->id >= V4L2_CID_LASTP1) + return -EINVAL; + if (c->id == V4L2_CID_AUDIO_MUTE) { + ctrl = ctrl_by_id(c->id); + *c = *ctrl; + } else + *c = no_ctrl; + return 0; } static const struct file_operations video_fops = @@ -2341,7 +2299,7 @@ static const struct file_operations video_fops = .read = video_read, .poll = video_poll, .mmap = video_mmap, - .ioctl = video_ioctl, + .ioctl = video_ioctl2, .compat_ioctl = v4l_compat_ioctl32, .llseek = no_llseek, }; @@ -2351,7 +2309,7 @@ static const struct file_operations radio_fops = .owner = THIS_MODULE, .open = video_open, .release = video_release, - .ioctl = radio_ioctl, + .ioctl = video_ioctl2, .compat_ioctl = v4l_compat_ioctl32, .llseek = no_llseek, }; @@ -2361,11 +2319,47 @@ static const struct file_operations radio_fops = struct video_device saa7134_video_template = { - .name = "saa7134-video", - .type = VID_TYPE_CAPTURE|VID_TYPE_TUNER| - VID_TYPE_CLIPPING|VID_TYPE_SCALES, - .fops = &video_fops, - .minor = -1, + .name = "saa7134-video", + .type = VID_TYPE_CAPTURE|VID_TYPE_TUNER | + VID_TYPE_CLIPPING|VID_TYPE_SCALES, + .fops = &video_fops, + .minor = -1, + .vidioc_querycap = vidioc_querycap, + .vidioc_enum_fmt_cap = vidioc_enum_fmt_cap, + .vidioc_g_fmt_cap = vidioc_g_fmt_cap, + .vidioc_try_fmt_cap = vidioc_try_fmt_cap, + .vidioc_s_fmt_cap = vidioc_s_fmt_cap, + .vidioc_g_audio = vidioc_g_audio, + .vidioc_s_audio = vidioc_s_audio, + .vidioc_cropcap = vidioc_cropcap, + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + .vidioc_s_std = vidioc_s_std, + .vidioc_enum_input = vidioc_enum_input, + .vidioc_g_input = vidioc_g_input, + .vidioc_s_input = vidioc_s_input, + .vidioc_queryctrl = vidioc_queryctrl, + .vidioc_g_ctrl = vidioc_g_ctrl, + .vidioc_s_ctrl = vidioc_s_ctrl, + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, + .vidioc_g_tuner = vidioc_g_tuner, + .vidioc_s_tuner = vidioc_s_tuner, +#ifdef CONFIG_VIDEO_V4L1_COMPAT + .vidiocgmbuf = vidiocgmbuf, +#endif + .vidioc_g_crop = vidioc_g_crop, + .vidioc_s_crop = vidioc_s_crop, + .vidioc_g_fbuf = vidioc_g_fbuf, + .vidioc_s_fbuf = vidioc_s_fbuf, + .vidioc_overlay = vidioc_overlay, + .vidioc_g_priority = vidioc_g_priority, + .vidioc_s_priority = vidioc_s_priority, + .vidioc_g_parm = vidioc_g_parm, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_s_frequency = vidioc_s_frequency, }; struct video_device saa7134_vbi_template = @@ -2382,6 +2376,20 @@ struct video_device saa7134_radio_template = .type = VID_TYPE_TUNER, .fops = &radio_fops, .minor = -1, + .vidioc_querycap = radio_querycap, + .vidioc_g_tuner = radio_g_tuner, + .vidioc_enum_input = radio_enum_input, + .vidioc_g_audio = radio_g_audio, + .vidioc_s_tuner = radio_s_tuner, + .vidioc_s_audio = radio_s_audio, + .vidioc_s_input = radio_s_input, + .vidioc_s_std = radio_s_std, + .vidioc_queryctrl = radio_queryctrl, + .vidioc_g_input = radio_g_input, + .vidioc_g_ctrl = vidioc_g_ctrl, + .vidioc_s_ctrl = vidioc_s_ctrl, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_s_frequency = vidioc_s_frequency, }; int saa7134_video_init1(struct saa7134_dev *dev) -- cgit v1.2.3-59-g8ed1b From 90bdc14533fa37b86ada57fcf60c634106ddbb3f Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Dec 2007 17:23:38 -0300 Subject: V4L/DVB (6735): Reorder functions to make easier to compare with the previous code After this patch, the order of the functions will be the same as before the patch converting the driver to user video_ioctl2. This makes easier to diff between the previous version and the newer one. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-video.c | 348 ++++++++++++++-------------- 1 file changed, 174 insertions(+), 174 deletions(-) diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c index 954542e5c99f..76b841dd7ec0 100644 --- a/drivers/media/video/saa7134/saa7134-video.c +++ b/drivers/media/video/saa7134/saa7134-video.c @@ -1670,30 +1670,6 @@ static int vidioc_s_fmt_cap(struct file *file, void *priv, } } -static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) -{ - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; - - *i = dev->ctl_input; - return 0; -} - -static int vidioc_s_input(struct file *file, void *priv, unsigned int i) -{ - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; - - if (i < 0 || i >= SAA7134_INPUT_MAX) - return -EINVAL; - if (NULL == card_in(dev, i).name) - return -EINVAL; - mutex_lock(&dev->lock); - video_mux(dev, i); - mutex_unlock(&dev->lock); - return 0; -} - static int vidioc_queryctrl(struct file *file, void *priv, struct v4l2_queryctrl *c) { @@ -1744,6 +1720,30 @@ static int vidioc_enum_input(struct file *file, void *priv, return 0; } +static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + + *i = dev->ctl_input; + return 0; +} + +static int vidioc_s_input(struct file *file, void *priv, unsigned int i) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + + if (i < 0 || i >= SAA7134_INPUT_MAX) + return -EINVAL; + if (NULL == card_in(dev, i).name) + return -EINVAL; + mutex_lock(&dev->lock); + video_mux(dev, i); + mutex_unlock(&dev->lock); + return 0; +} + static int vidioc_querycap(struct file *file, void *priv, struct v4l2_capability *cap) { @@ -1847,6 +1847,55 @@ static int vidioc_cropcap(struct file *file, void *priv, return 0; } +static int vidioc_g_crop(struct file *file, void *f, struct v4l2_crop *crop) +{ + struct saa7134_fh *fh = f; + struct saa7134_dev *dev = fh->dev; + + if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && + crop->type != V4L2_BUF_TYPE_VIDEO_OVERLAY) + return -EINVAL; + crop->c = dev->crop_current; + return 0; +} + +static int vidioc_s_crop(struct file *file, void *f, struct v4l2_crop *crop) +{ + struct saa7134_fh *fh = f; + struct saa7134_dev *dev = fh->dev; + struct v4l2_rect *b = &dev->crop_bounds; + + if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && + crop->type != V4L2_BUF_TYPE_VIDEO_OVERLAY) + return -EINVAL; + if (crop->c.height < 0) + return -EINVAL; + if (crop->c.width < 0) + return -EINVAL; + + if (res_locked(fh->dev, RESOURCE_OVERLAY)) + return -EBUSY; + if (res_locked(fh->dev, RESOURCE_VIDEO)) + return -EBUSY; + + if (crop->c.top < b->top) + crop->c.top = b->top; + if (crop->c.top > b->top + b->height) + crop->c.top = b->top + b->height; + if (crop->c.height > b->top - crop->c.top + b->height) + crop->c.height = b->top - crop->c.top + b->height; + + if (crop->c.left < b->left) + crop->c.left = b->left; + if (crop->c.left > b->left + b->width) + crop->c.left = b->left + b->width; + if (crop->c.width > b->left - crop->c.left + b->width) + crop->c.width = b->left - crop->c.left + b->width; + + dev->crop_current = crop->c; + return 0; +} + static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *t) { @@ -1939,113 +1988,64 @@ static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a) return 0; } -static int vidioc_streamon(struct file *file, void *priv, - enum v4l2_buf_type type) -{ - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; - int res = saa7134_resource(fh); - - if (!res_get(dev, fh, res)) - return -EBUSY; - - return videobuf_streamon(saa7134_queue(fh)); -} - -static int vidioc_streamoff(struct file *file, void *priv, - enum v4l2_buf_type type) -{ - int err; - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; - int res = saa7134_resource(fh); - - err = videobuf_streamoff(saa7134_queue(fh)); - if (err < 0) - return err; - res_free(dev, fh, res); - return 0; -} - -static int vidioc_reqbufs(struct file *file, void *priv, - struct v4l2_requestbuffers *p) -{ - struct saa7134_fh *fh = priv; - return videobuf_reqbufs(saa7134_queue(fh), p); -} - -static int vidioc_s_crop(struct file *file, void *f, struct v4l2_crop *crop) +static int vidioc_g_priority(struct file *file, void *f, enum v4l2_priority *p) { struct saa7134_fh *fh = f; struct saa7134_dev *dev = fh->dev; - struct v4l2_rect *b = &dev->crop_bounds; - - if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && - crop->type != V4L2_BUF_TYPE_VIDEO_OVERLAY) - return -EINVAL; - if (crop->c.height < 0) - return -EINVAL; - if (crop->c.width < 0) - return -EINVAL; - - if (res_locked(fh->dev, RESOURCE_OVERLAY)) - return -EBUSY; - if (res_locked(fh->dev, RESOURCE_VIDEO)) - return -EBUSY; - if (crop->c.top < b->top) - crop->c.top = b->top; - if (crop->c.top > b->top + b->height) - crop->c.top = b->top + b->height; - if (crop->c.height > b->top - crop->c.top + b->height) - crop->c.height = b->top - crop->c.top + b->height; - - if (crop->c.left < b->left) - crop->c.left = b->left; - if (crop->c.left > b->left + b->width) - crop->c.left = b->left + b->width; - if (crop->c.width > b->left - crop->c.left + b->width) - crop->c.width = b->left - crop->c.left + b->width; - - dev->crop_current = crop->c; + *p = v4l2_prio_max(&dev->prio); return 0; } -static int vidioc_g_crop(struct file *file, void *f, struct v4l2_crop *crop) +static int vidioc_s_priority(struct file *file, void *f, + enum v4l2_priority prio) { struct saa7134_fh *fh = f; struct saa7134_dev *dev = fh->dev; - if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && - crop->type != V4L2_BUF_TYPE_VIDEO_OVERLAY) - return -EINVAL; - crop->c = dev->crop_current; - return 0; -} - -static int vidioc_g_parm(struct file *file, void *fh, - struct v4l2_streamparm *parm) -{ - memset(parm, 0, sizeof(*parm)); - return 0; + return v4l2_prio_change(&dev->prio, &fh->prio, prio); } -static int vidioc_g_priority(struct file *file, void *f, enum v4l2_priority *p) +static int vidioc_enum_fmt_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) { - struct saa7134_fh *fh = f; - struct saa7134_dev *dev = fh->dev; + enum v4l2_buf_type type; + unsigned int index; - *p = v4l2_prio_max(&dev->prio); - return 0; -} + index = f->index; + type = f->type; + switch (type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + case V4L2_BUF_TYPE_VIDEO_OVERLAY: + if (saa7134_no_overlay > 0) + return -EINVAL; -static int vidioc_s_priority(struct file *file, void *f, - enum v4l2_priority prio) -{ - struct saa7134_fh *fh = f; - struct saa7134_dev *dev = fh->dev; + if (index >= FORMATS) + return -EINVAL; - return v4l2_prio_change(&dev->prio, &fh->prio, prio); + if (f->type == V4L2_BUF_TYPE_VIDEO_OVERLAY && + formats[index].planar) + return -EINVAL; + memset(f, 0, sizeof(*f)); + f->index = index; + f->type = type; + strlcpy(f->description, formats[index].name, + sizeof(f->description)); + f->pixelformat = formats[index].fourcc; + break; + case V4L2_BUF_TYPE_VBI_CAPTURE: + if (0 != index) + return -EINVAL; + memset(f, 0, sizeof(*f)); + f->index = index; + f->type = type; + f->pixelformat = V4L2_PIX_FMT_GREY; + strcpy(f->description, "vbi data"); + break; + default: + return -EINVAL; + } + return 0; } static int vidioc_g_fbuf(struct file *file, void *f, @@ -2085,26 +2085,6 @@ static int vidioc_s_fbuf(struct file *file, void *f, return 0; } -static int vidioc_querybuf(struct file *file, void *priv, - struct v4l2_buffer *b) -{ - struct saa7134_fh *fh = priv; - return videobuf_querybuf(saa7134_queue(fh), b); -} - -static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b) -{ - struct saa7134_fh *fh = priv; - return videobuf_qbuf(saa7134_queue(fh), b); -} - -static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) -{ - struct saa7134_fh *fh = priv; - return videobuf_dqbuf(saa7134_queue(fh), b, - file->f_flags & O_NONBLOCK); -} - static int vidioc_overlay(struct file *file, void *f, unsigned int on) { struct saa7134_fh *fh = f; @@ -2134,55 +2114,75 @@ static int vidioc_overlay(struct file *file, void *f, unsigned int on) return 0; } -static int vidioc_enum_fmt_cap(struct file *file, void *priv, - struct v4l2_fmtdesc *f) +#ifdef CONFIG_VIDEO_V4L1_COMPAT +static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf) { - enum v4l2_buf_type type; - unsigned int index; + struct saa7134_fh *fh = file->private_data; + return videobuf_cgmbuf(saa7134_queue(fh), mbuf, 8); +} +#endif - index = f->index; - type = f->type; - switch (type) { - case V4L2_BUF_TYPE_VIDEO_CAPTURE: - case V4L2_BUF_TYPE_VIDEO_OVERLAY: - if (saa7134_no_overlay > 0) - return -EINVAL; +static int vidioc_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *p) +{ + struct saa7134_fh *fh = priv; + return videobuf_reqbufs(saa7134_queue(fh), p); +} - if (index >= FORMATS) - return -EINVAL; +static int vidioc_querybuf(struct file *file, void *priv, + struct v4l2_buffer *b) +{ + struct saa7134_fh *fh = priv; + return videobuf_querybuf(saa7134_queue(fh), b); +} - if (f->type == V4L2_BUF_TYPE_VIDEO_OVERLAY && - formats[index].planar) - return -EINVAL; - memset(f, 0, sizeof(*f)); - f->index = index; - f->type = type; - strlcpy(f->description, formats[index].name, - sizeof(f->description)); - f->pixelformat = formats[index].fourcc; - break; - case V4L2_BUF_TYPE_VBI_CAPTURE: - if (0 != index) - return -EINVAL; - memset(f, 0, sizeof(*f)); - f->index = index; - f->type = type; - f->pixelformat = V4L2_PIX_FMT_GREY; - strcpy(f->description, "vbi data"); - break; - default: - return -EINVAL; - } +static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b) +{ + struct saa7134_fh *fh = priv; + return videobuf_qbuf(saa7134_queue(fh), b); +} + +static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) +{ + struct saa7134_fh *fh = priv; + return videobuf_dqbuf(saa7134_queue(fh), b, + file->f_flags & O_NONBLOCK); +} + +static int vidioc_streamon(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + int res = saa7134_resource(fh); + + if (!res_get(dev, fh, res)) + return -EBUSY; + + return videobuf_streamon(saa7134_queue(fh)); +} + +static int vidioc_streamoff(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + int err; + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + int res = saa7134_resource(fh); + + err = videobuf_streamoff(saa7134_queue(fh)); + if (err < 0) + return err; + res_free(dev, fh, res); return 0; } -#ifdef CONFIG_VIDEO_V4L1_COMPAT -static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf) +static int vidioc_g_parm(struct file *file, void *fh, + struct v4l2_streamparm *parm) { - struct saa7134_fh *fh = file->private_data; - return videobuf_cgmbuf(saa7134_queue(fh), mbuf, 8); + memset(parm, 0, sizeof(*parm)); + return 0; } -#endif static int radio_querycap(struct file *file, void *priv, struct v4l2_capability *cap) -- cgit v1.2.3-59-g8ed1b From 8c85454a5963747fca7d0699e2450f676314c176 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Dec 2007 17:34:48 -0300 Subject: V4L/DVB (6736): Fix some errors at the video_ioctl2 conversion Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-core.c | 1 + drivers/media/video/saa7134/saa7134-video.c | 388 ++++++++++++++++------------ drivers/media/video/saa7134/saa7134.h | 1 + 3 files changed, 218 insertions(+), 172 deletions(-) diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index cbddd35f1618..92c48ee1591b 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -834,6 +834,7 @@ static struct video_device *vdev_init(struct saa7134_dev *dev, vfd->minor = -1; vfd->dev = &dev->pci->dev; vfd->release = video_device_release; + vfd->debug = video_debug; snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)", dev->name, type, saa7134_boards[dev->board].name); return vfd; diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c index 76b841dd7ec0..043e1396857a 100644 --- a/drivers/media/video/saa7134/saa7134-video.c +++ b/drivers/media/video/saa7134/saa7134-video.c @@ -38,7 +38,7 @@ /* ------------------------------------------------------------------ */ -static unsigned int video_debug = 0; +unsigned int video_debug; static unsigned int gbuffers = 8; static unsigned int noninterlaced = 0; static unsigned int gbufsize = 720*576*4; @@ -54,7 +54,7 @@ module_param_string(secam, secam, sizeof(secam), 0644); MODULE_PARM_DESC(secam, "force SECAM variant, either DK,L or Lc"); -#define dprintk(fmt, arg...) if (video_debug) \ +#define dprintk(fmt, arg...) if (video_debug&0x04) \ printk(KERN_DEBUG "%s/video: " fmt, dev->name , ## arg) /* ------------------------------------------------------------------ */ @@ -217,6 +217,12 @@ static struct saa7134_format formats[] = { .vbi_v_start_1 = 273, \ .src_timing = 7 +#define SAA7134_NORMS \ + V4L2_STD_PAL | V4L2_STD_PAL_N | \ + V4L2_STD_PAL_Nc | V4L2_STD_SECAM | \ + V4L2_STD_NTSC | V4L2_STD_PAL_M | \ + V4L2_STD_PAL_60 + static struct saa7134_tvnorm tvnorms[] = { { .name = "PAL", /* autodetect */ @@ -542,7 +548,6 @@ void res_free(struct saa7134_dev *dev, struct saa7134_fh *fh, unsigned int bits) static void set_tvnorm(struct saa7134_dev *dev, struct saa7134_tvnorm *norm) { - dprintk("set tv norm = %s\n",norm->name); dev->tvnorm = norm; @@ -561,7 +566,6 @@ static void set_tvnorm(struct saa7134_dev *dev, struct saa7134_tvnorm *norm) dev->crop_current = dev->crop_defrect; saa7134_set_tvnorm_hw(dev); - } static void video_mux(struct saa7134_dev *dev, int input) @@ -1177,11 +1181,18 @@ static int vidioc_s_ctrl(struct file *file, void *f, struct saa7134_dev *dev = fh->dev; unsigned long flags; int restart_overlay = 0; + int err = -EINVAL; + + err = v4l2_prio_check(&dev->prio, &fh->prio); + if (0 != err) + return err; mutex_lock(&dev->lock); + ctrl = ctrl_by_id(c->id); if (NULL == ctrl) - return -EINVAL; + goto error; + dprintk("set_control name=%s val=%d\n",ctrl->name,c->value); switch (ctrl->type) { case V4L2_CTRL_TYPE_BOOLEAN: @@ -1261,8 +1272,7 @@ static int vidioc_s_ctrl(struct file *file, void *f, break; } default: - mutex_unlock(&dev->lock); - return -EINVAL; + goto error; } if (restart_overlay && fh && res_check(fh, RESOURCE_OVERLAY)) { spin_lock_irqsave(&dev->slock,flags); @@ -1270,8 +1280,11 @@ static int vidioc_s_ctrl(struct file *file, void *f, start_preview(dev,fh); spin_unlock_irqrestore(&dev->slock,flags); } + err = 0; + +error: mutex_unlock(&dev->lock); - return 0; + return err; } /* ------------------------------------------------------------------ */ @@ -1494,8 +1507,11 @@ static int video_mmap(struct file *file, struct vm_area_struct * vma) /* ------------------------------------------------------------------ */ -static void saa7134_vbi_fmt(struct saa7134_dev *dev, struct v4l2_format *f) +static int vidioc_try_get_set_fmt_vbi(struct file *file, void *priv, + struct v4l2_format *f) { + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; struct saa7134_tvnorm *norm = dev->tvnorm; f->fmt.vbi.sampling_rate = 6750000 * 4; @@ -1508,39 +1524,37 @@ static void saa7134_vbi_fmt(struct saa7134_dev *dev, struct v4l2_format *f) f->fmt.vbi.count[1] = f->fmt.vbi.count[0]; f->fmt.vbi.flags = 0; /* VBI_UNSYNC VBI_INTERLACED */ + return 0; } static int vidioc_g_fmt_cap(struct file *file, void *priv, struct v4l2_format *f) { struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; - switch (f->type) { - case V4L2_BUF_TYPE_VIDEO_CAPTURE: - memset(&f->fmt.pix,0,sizeof(f->fmt.pix)); - f->fmt.pix.width = fh->width; - f->fmt.pix.height = fh->height; - f->fmt.pix.field = fh->cap.field; - f->fmt.pix.pixelformat = fh->fmt->fourcc; - f->fmt.pix.bytesperline = - (f->fmt.pix.width * fh->fmt->depth) >> 3; - f->fmt.pix.sizeimage = - f->fmt.pix.height * f->fmt.pix.bytesperline; - return 0; - case V4L2_BUF_TYPE_VIDEO_OVERLAY: - if (saa7134_no_overlay > 0) { - printk ("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); - return -EINVAL; - } - f->fmt.win = fh->win; - return 0; - case V4L2_BUF_TYPE_VBI_CAPTURE: - saa7134_vbi_fmt(dev,f); - return 0; - default: + f->fmt.pix.width = fh->width; + f->fmt.pix.height = fh->height; + f->fmt.pix.field = fh->cap.field; + f->fmt.pix.pixelformat = fh->fmt->fourcc; + f->fmt.pix.bytesperline = + (f->fmt.pix.width * fh->fmt->depth) >> 3; + f->fmt.pix.sizeimage = + f->fmt.pix.height * f->fmt.pix.bytesperline; + return 0; +} + +static int vidioc_g_fmt_overlay(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct saa7134_fh *fh = priv; + + if (saa7134_no_overlay > 0) { + printk(KERN_ERR "V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); return -EINVAL; } + f->fmt.win = fh->win; + + return 0; } static int vidioc_try_fmt_cap(struct file *file, void *priv, @@ -1548,126 +1562,122 @@ static int vidioc_try_fmt_cap(struct file *file, void *priv, { struct saa7134_fh *fh = priv; struct saa7134_dev *dev = fh->dev; - int err; + struct saa7134_format *fmt; + enum v4l2_field field; + unsigned int maxw, maxh; - switch (f->type) { - case V4L2_BUF_TYPE_VIDEO_CAPTURE: - { - struct saa7134_format *fmt; - enum v4l2_field field; - unsigned int maxw, maxh; + fmt = format_by_fourcc(f->fmt.pix.pixelformat); + if (NULL == fmt) + return -EINVAL; - fmt = format_by_fourcc(f->fmt.pix.pixelformat); - if (NULL == fmt) - return -EINVAL; + field = f->fmt.pix.field; + maxw = min(dev->crop_current.width*4, dev->crop_bounds.width); + maxh = min(dev->crop_current.height*4, dev->crop_bounds.height); - field = f->fmt.pix.field; - maxw = min(dev->crop_current.width*4, dev->crop_bounds.width); - maxh = min(dev->crop_current.height*4, dev->crop_bounds.height); + if (V4L2_FIELD_ANY == field) { + field = (f->fmt.pix.height > maxh/2) + ? V4L2_FIELD_INTERLACED + : V4L2_FIELD_BOTTOM; + } + switch (field) { + case V4L2_FIELD_TOP: + case V4L2_FIELD_BOTTOM: + maxh = maxh / 2; + break; + case V4L2_FIELD_INTERLACED: + break; + default: + return -EINVAL; + } - if (V4L2_FIELD_ANY == field) { - field = (f->fmt.pix.height > maxh/2) - ? V4L2_FIELD_INTERLACED - : V4L2_FIELD_BOTTOM; - } - switch (field) { - case V4L2_FIELD_TOP: - case V4L2_FIELD_BOTTOM: - maxh = maxh / 2; - break; - case V4L2_FIELD_INTERLACED: - break; - default: - return -EINVAL; - } + f->fmt.pix.field = field; + if (f->fmt.pix.width < 48) + f->fmt.pix.width = 48; + if (f->fmt.pix.height < 32) + f->fmt.pix.height = 32; + if (f->fmt.pix.width > maxw) + f->fmt.pix.width = maxw; + if (f->fmt.pix.height > maxh) + f->fmt.pix.height = maxh; + f->fmt.pix.width &= ~0x03; + f->fmt.pix.bytesperline = + (f->fmt.pix.width * fmt->depth) >> 3; + f->fmt.pix.sizeimage = + f->fmt.pix.height * f->fmt.pix.bytesperline; - f->fmt.pix.field = field; - if (f->fmt.pix.width < 48) - f->fmt.pix.width = 48; - if (f->fmt.pix.height < 32) - f->fmt.pix.height = 32; - if (f->fmt.pix.width > maxw) - f->fmt.pix.width = maxw; - if (f->fmt.pix.height > maxh) - f->fmt.pix.height = maxh; - f->fmt.pix.width &= ~0x03; - f->fmt.pix.bytesperline = - (f->fmt.pix.width * fmt->depth) >> 3; - f->fmt.pix.sizeimage = - f->fmt.pix.height * f->fmt.pix.bytesperline; + return 0; +} - return 0; - } - case V4L2_BUF_TYPE_VIDEO_OVERLAY: - if (saa7134_no_overlay > 0) { - printk ("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); - return -EINVAL; - } - err = verify_preview(dev,&f->fmt.win); - if (0 != err) - return err; - return 0; - case V4L2_BUF_TYPE_VBI_CAPTURE: - saa7134_vbi_fmt(dev,f); - return 0; - default: +static int vidioc_try_fmt_overlay(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + + if (saa7134_no_overlay > 0) { + printk(KERN_ERR "V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); return -EINVAL; } + + return verify_preview(dev, &f->fmt.win); } static int vidioc_s_fmt_cap(struct file *file, void *priv, struct v4l2_format *f) +{ + struct saa7134_fh *fh = priv; + int err; + + err = vidioc_try_fmt_cap(file, priv, f); + if (0 != err) + return err; + + fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat); + fh->width = f->fmt.pix.width; + fh->height = f->fmt.pix.height; + fh->cap.field = f->fmt.pix.field; + return 0; +} + +static int vidioc_s_fmt_overlay(struct file *file, void *priv, + struct v4l2_format *f) { struct saa7134_fh *fh = priv; struct saa7134_dev *dev = fh->dev; - unsigned long flags; int err; + unsigned int flags; - switch (f->type) { - case V4L2_BUF_TYPE_VIDEO_CAPTURE: - err = vidioc_try_fmt_cap(file, priv, f); - if (0 != err) - return err; - - fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat); - fh->width = f->fmt.pix.width; - fh->height = f->fmt.pix.height; - fh->cap.field = f->fmt.pix.field; - return 0; - case V4L2_BUF_TYPE_VIDEO_OVERLAY: - if (saa7134_no_overlay > 0) { - printk ("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); - return -EINVAL; - } - err = verify_preview(dev,&f->fmt.win); - if (0 != err) - return err; - - mutex_lock(&dev->lock); - fh->win = f->fmt.win; - fh->nclips = f->fmt.win.clipcount; - if (fh->nclips > 8) - fh->nclips = 8; - if (copy_from_user(fh->clips,f->fmt.win.clips, - sizeof(struct v4l2_clip)*fh->nclips)) { - mutex_unlock(&dev->lock); - return -EFAULT; - } + if (saa7134_no_overlay > 0) { + printk(KERN_ERR "V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); + return -EINVAL; + } + err = verify_preview(dev, &f->fmt.win); + if (0 != err) + return err; - if (res_check(fh, RESOURCE_OVERLAY)) { - spin_lock_irqsave(&dev->slock,flags); - stop_preview(dev,fh); - start_preview(dev,fh); - spin_unlock_irqrestore(&dev->slock,flags); - } + mutex_lock(&dev->lock); + + fh->win = f->fmt.win; + fh->nclips = f->fmt.win.clipcount; + + if (fh->nclips > 8) + fh->nclips = 8; + + if (copy_from_user(fh->clips, f->fmt.win.clips, + sizeof(struct v4l2_clip)*fh->nclips)) { mutex_unlock(&dev->lock); - return 0; - case V4L2_BUF_TYPE_VBI_CAPTURE: - saa7134_vbi_fmt(dev,f); - return 0; - default: - return -EINVAL; + return -EFAULT; } + + if (res_check(fh, RESOURCE_OVERLAY)) { + spin_lock_irqsave(&dev->slock, flags); + stop_preview(dev, fh); + start_preview(dev, fh); + spin_unlock_irqrestore(&dev->slock, flags); + } + + mutex_unlock(&dev->lock); + return 0; } static int vidioc_queryctrl(struct file *file, void *priv, @@ -1715,8 +1725,7 @@ static int vidioc_enum_input(struct file *file, void *priv, if (0 != (v2 & 0x0e)) i->status |= V4L2_IN_ST_MACROVISION; } - for (n = 0; n < TVNORMS; n++) - i->std |= tvnorms[n].id; + i->std = SAA7134_NORMS; return 0; } @@ -1733,6 +1742,11 @@ static int vidioc_s_input(struct file *file, void *priv, unsigned int i) { struct saa7134_fh *fh = priv; struct saa7134_dev *dev = fh->dev; + int err; + + err = v4l2_prio_check(&dev->prio, &fh->prio); + if (0 != err) + return err; if (i < 0 || i >= SAA7134_INPUT_MAX) return -EINVAL; @@ -1752,7 +1766,6 @@ static int vidioc_querycap(struct file *file, void *priv, unsigned int tuner_type = dev->tuner_type; - memset(cap, 0, sizeof(*cap)); strcpy(cap->driver, "saa7134"); strlcpy(cap->card, saa7134_boards[dev->board].name, sizeof(cap->card)); @@ -1779,16 +1792,23 @@ static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id * id) unsigned long flags; unsigned int i; v4l2_std_id fixup; + int err; + + err = v4l2_prio_check(&dev->prio, &fh->prio); + if (0 != err) + return err; for (i = 0; i < TVNORMS; i++) if (*id == tvnorms[i].id) break; + if (i == TVNORMS) for (i = 0; i < TVNORMS; i++) if (*id & tvnorms[i].id) break; if (i == TVNORMS) return -EINVAL; + if ((*id & V4L2_STD_SECAM) && (secam[0] != '-')) { if (secam[0] == 'L' || secam[0] == 'l') { if (secam[1] == 'C' || secam[1] == 'c') @@ -1805,6 +1825,9 @@ static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id * id) if (fixup == tvnorms[i].id) break; } + + *id = tvnorms[i].id; + mutex_lock(&dev->lock); if (res_check(fh, RESOURCE_OVERLAY)) { spin_lock_irqsave(&dev->slock, flags); @@ -1818,6 +1841,7 @@ static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id * id) spin_unlock_irqrestore(&dev->slock, flags); } else set_tvnorm(dev, &tvnorms[i]); + saa7134_tvaudio_do_scan(dev); mutex_unlock(&dev->lock); return 0; @@ -1930,7 +1954,11 @@ static int vidioc_s_tuner(struct file *file, void *priv, { struct saa7134_fh *fh = priv; struct saa7134_dev *dev = fh->dev; - int rx, mode; + int rx, mode, err; + + err = v4l2_prio_check(&dev->prio, &fh->prio); + if (0 != err) + return err; mode = dev->thread.mode; if (UNSET == mode) { @@ -1939,6 +1967,7 @@ static int vidioc_s_tuner(struct file *file, void *priv, } if (mode != t->audmode) dev->thread.mode = t->audmode; + return 0; } @@ -1948,9 +1977,9 @@ static int vidioc_g_frequency(struct file *file, void *priv, struct saa7134_fh *fh = priv; struct saa7134_dev *dev = fh->dev; - memset(f, 0, sizeof(*f)); f->type = fh->radio ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; f->frequency = dev->ctl_freq; + return 0; } @@ -1959,6 +1988,11 @@ static int vidioc_s_frequency(struct file *file, void *priv, { struct saa7134_fh *fh = priv; struct saa7134_dev *dev = fh->dev; + int err; + + err = v4l2_prio_check(&dev->prio, &fh->prio); + if (0 != err) + return err; if (0 != f->tuner) return -EINVAL; @@ -1978,7 +2012,6 @@ static int vidioc_s_frequency(struct file *file, void *priv, static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a) { - memset(a, 0, sizeof(*a)); strcpy(a->name, "audio"); return 0; } @@ -2009,42 +2042,45 @@ static int vidioc_s_priority(struct file *file, void *f, static int vidioc_enum_fmt_cap(struct file *file, void *priv, struct v4l2_fmtdesc *f) { - enum v4l2_buf_type type; - unsigned int index; + if (f->index >= FORMATS) + return -EINVAL; - index = f->index; - type = f->type; - switch (type) { - case V4L2_BUF_TYPE_VIDEO_CAPTURE: - case V4L2_BUF_TYPE_VIDEO_OVERLAY: - if (saa7134_no_overlay > 0) - return -EINVAL; + strlcpy(f->description, formats[f->index].name, + sizeof(f->description)); - if (index >= FORMATS) - return -EINVAL; + f->pixelformat = formats[f->index].fourcc; - if (f->type == V4L2_BUF_TYPE_VIDEO_OVERLAY && - formats[index].planar) - return -EINVAL; - memset(f, 0, sizeof(*f)); - f->index = index; - f->type = type; - strlcpy(f->description, formats[index].name, - sizeof(f->description)); - f->pixelformat = formats[index].fourcc; - break; - case V4L2_BUF_TYPE_VBI_CAPTURE: - if (0 != index) - return -EINVAL; - memset(f, 0, sizeof(*f)); - f->index = index; - f->type = type; - f->pixelformat = V4L2_PIX_FMT_GREY; - strcpy(f->description, "vbi data"); - break; - default: + return 0; +} + +static int vidioc_enum_fmt_overlay(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + if (saa7134_no_overlay > 0) { + printk(KERN_ERR "V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); return -EINVAL; } + + if ((f->index >= FORMATS) || formats[f->index].planar) + return -EINVAL; + + strlcpy(f->description, formats[f->index].name, + sizeof(f->description)); + + f->pixelformat = formats[f->index].fourcc; + + return 0; +} + +static int vidioc_enum_fmt_vbi(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + if (0 != f->index) + return -EINVAL; + + f->pixelformat = V4L2_PIX_FMT_GREY; + strcpy(f->description, "vbi data"); + return 0; } @@ -2180,7 +2216,6 @@ static int vidioc_streamoff(struct file *file, void *priv, static int vidioc_g_parm(struct file *file, void *fh, struct v4l2_streamparm *parm) { - memset(parm, 0, sizeof(*parm)); return 0; } @@ -2190,7 +2225,6 @@ static int radio_querycap(struct file *file, void *priv, struct saa7134_fh *fh = file->private_data; struct saa7134_dev *dev = fh->dev; - memset(cap, 0, sizeof(*cap)); strcpy(cap->driver, "saa7134"); strlcpy(cap->card, saa7134_boards[dev->board].name, sizeof(cap->card)); sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci)); @@ -2329,6 +2363,14 @@ struct video_device saa7134_video_template = .vidioc_g_fmt_cap = vidioc_g_fmt_cap, .vidioc_try_fmt_cap = vidioc_try_fmt_cap, .vidioc_s_fmt_cap = vidioc_s_fmt_cap, + .vidioc_enum_fmt_overlay = vidioc_enum_fmt_overlay, + .vidioc_g_fmt_overlay = vidioc_g_fmt_overlay, + .vidioc_try_fmt_overlay = vidioc_try_fmt_overlay, + .vidioc_s_fmt_overlay = vidioc_s_fmt_overlay, + .vidioc_enum_fmt_vbi = vidioc_enum_fmt_vbi, + .vidioc_g_fmt_vbi = vidioc_try_get_set_fmt_vbi, + .vidioc_try_fmt_vbi = vidioc_try_get_set_fmt_vbi, + .vidioc_s_fmt_vbi = vidioc_try_get_set_fmt_vbi, .vidioc_g_audio = vidioc_g_audio, .vidioc_s_audio = vidioc_s_audio, .vidioc_cropcap = vidioc_cropcap, @@ -2360,6 +2402,8 @@ struct video_device saa7134_video_template = .vidioc_g_parm = vidioc_g_parm, .vidioc_g_frequency = vidioc_g_frequency, .vidioc_s_frequency = vidioc_s_frequency, + .tvnorms = SAA7134_NORMS, + .current_norm = V4L2_STD_PAL, }; struct video_device saa7134_vbi_template = diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 5c5b07413076..8fb95094ba84 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -625,6 +625,7 @@ void saa7134_i2c_call_clients(struct saa7134_dev *dev, /* ----------------------------------------------------------- */ /* saa7134-video.c */ +extern unsigned int video_debug; extern struct video_device saa7134_video_template; extern struct video_device saa7134_radio_template; -- cgit v1.2.3-59-g8ed1b From 842441d42de8f22d8f530b19da984df81fed8f7e Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 1 Nov 2007 07:35:41 -0300 Subject: V4L/DVB (6737): wm8775: codingstyle cleanup Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/wm8775.c | 66 +++++++++++++++++++++++++------------------- 1 file changed, 38 insertions(+), 28 deletions(-) diff --git a/drivers/media/video/wm8775.c b/drivers/media/video/wm8775.c index c31a0c34b08b..869f9e7946b6 100644 --- a/drivers/media/video/wm8775.c +++ b/drivers/media/video/wm8775.c @@ -68,17 +68,15 @@ static int wm8775_write(struct i2c_client *client, int reg, u16 val) return -1; } - for (i = 0; i < 3; i++) { - if (i2c_smbus_write_byte_data(client, (reg << 1) | - (val >> 8), val & 0xff) == 0) { + for (i = 0; i < 3; i++) + if (i2c_smbus_write_byte_data(client, + (reg << 1) | (val >> 8), val & 0xff) == 0) return 0; - } - } v4l_err(client, "I2C: cannot write %03x to register R%d\n", val, reg); return -1; } -static int wm8775_command(struct i2c_client *client, unsigned int cmd, void *arg) +static int wm8775_command(struct i2c_client *client, unsigned cmd, void *arg) { struct wm8775_state *state = i2c_get_clientdata(client); struct v4l2_routing *route = arg; @@ -127,7 +125,8 @@ static int wm8775_command(struct i2c_client *client, unsigned int cmd, void *arg break; case VIDIOC_G_CHIP_IDENT: - return v4l2_chip_ident_i2c_client(client, arg, V4L2_IDENT_WM8775, 0); + return v4l2_chip_ident_i2c_client(client, + arg, V4L2_IDENT_WM8775, 0); case VIDIOC_LOG_STATUS: v4l_info(client, "Input: %d%s\n", state->input, @@ -168,34 +167,45 @@ static int wm8775_probe(struct i2c_client *client) if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -EIO; - v4l_info(client, "chip found @ 0x%x (%s)\n", client->addr << 1, client->adapter->name); + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); state = kmalloc(sizeof(struct wm8775_state), GFP_KERNEL); - if (state == NULL) { + if (state == NULL) return -ENOMEM; - } state->input = 2; state->muted = 0; i2c_set_clientdata(client, state); - /* initialize wm8775 */ - wm8775_write(client, R23, 0x000); /* RESET */ - wm8775_write(client, R7, 0x000); /* Disable zero cross detect timeout */ - wm8775_write(client, R11, 0x021); /* Left justified, 24-bit mode */ - wm8775_write(client, R12, 0x102); /* Master mode, clock ratio 256fs */ - wm8775_write(client, R13, 0x000); /* Powered up */ - wm8775_write(client, R14, 0x1d4); /* ADC gain +2.5dB, enable zero cross */ - wm8775_write(client, R15, 0x1d4); /* ADC gain +2.5dB, enable zero cross */ - wm8775_write(client, R16, 0x1bf); /* ALC Stereo, ALC target level -1dB FS */ - /* max gain +8dB */ - wm8775_write(client, R17, 0x185); /* Enable gain control, use zero cross */ - /* detection, ALC hold time 42.6 ms */ - wm8775_write(client, R18, 0x0a2); /* ALC gain ramp up delay 34 s, */ - /* ALC gain ramp down delay 33 ms */ - wm8775_write(client, R19, 0x005); /* Enable noise gate, threshold -72dBfs */ - wm8775_write(client, R20, 0x07a); /* Transient window 4ms, lower PGA gain */ - /* limit -1dB */ - wm8775_write(client, R21, 0x102); /* LRBOTH = 1, use input 2. */ + /* Initialize wm8775 */ + + /* RESET */ + wm8775_write(client, R23, 0x000); + /* Disable zero cross detect timeout */ + wm8775_write(client, R7, 0x000); + /* Left justified, 24-bit mode */ + wm8775_write(client, R11, 0x021); + /* Master mode, clock ratio 256fs */ + wm8775_write(client, R12, 0x102); + /* Powered up */ + wm8775_write(client, R13, 0x000); + /* ADC gain +2.5dB, enable zero cross */ + wm8775_write(client, R14, 0x1d4); + /* ADC gain +2.5dB, enable zero cross */ + wm8775_write(client, R15, 0x1d4); + /* ALC Stereo, ALC target level -1dB FS max gain +8dB */ + wm8775_write(client, R16, 0x1bf); + /* Enable gain control, use zero cross detection, + ALC hold time 42.6 ms */ + wm8775_write(client, R17, 0x185); + /* ALC gain ramp up delay 34 s, ALC gain ramp down delay 33 ms */ + wm8775_write(client, R18, 0x0a2); + /* Enable noise gate, threshold -72dBfs */ + wm8775_write(client, R19, 0x005); + /* Transient window 4ms, lower PGA gain limit -1dB */ + wm8775_write(client, R20, 0x07a); + /* LRBOTH = 1, use input 2. */ + wm8775_write(client, R21, 0x102); return 0; } -- cgit v1.2.3-59-g8ed1b From 099b8e7361512ebfef2dd51f2e81126cc93c22e9 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 1 Nov 2007 07:45:54 -0300 Subject: V4L/DVB (6738): wm8739: codingstyle cleanups Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/wm8739.c | 65 ++++++++++++++++++++++++++------------------ 1 file changed, 38 insertions(+), 27 deletions(-) diff --git a/drivers/media/video/wm8739.c b/drivers/media/video/wm8739.c index 3d9e709833c5..ac4fee1d0251 100644 --- a/drivers/media/video/wm8739.c +++ b/drivers/media/video/wm8739.c @@ -36,7 +36,7 @@ MODULE_DESCRIPTION("wm8739 driver"); MODULE_AUTHOR("T. Adachi, Hans Verkuil"); MODULE_LICENSE("GPL"); -static int debug = 0; +static int debug; static unsigned short normal_i2c[] = { 0x34 >> 1, 0x36 >> 1, I2C_CLIENT_END }; module_param(debug, int, 0644); @@ -76,12 +76,10 @@ static int wm8739_write(struct i2c_client *client, int reg, u16 val) v4l_dbg(1, debug, client, "write: %02x %02x\n", reg, val); - for (i = 0; i < 3; i++) { - if (i2c_smbus_write_byte_data(client, (reg << 1) | - (val >> 8), val & 0xff) == 0) { + for (i = 0; i < 3; i++) + if (i2c_smbus_write_byte_data(client, + (reg << 1) | (val >> 8), val & 0xff) == 0) return 0; - } - } v4l_err(client, "I2C: cannot write %03x to register R%d\n", val, reg); return -1; } @@ -168,7 +166,7 @@ static struct v4l2_queryctrl wm8739_qctrl[] = { .default_value = 58880, .flags = 0, .type = V4L2_CTRL_TYPE_INTEGER, - },{ + }, { .id = V4L2_CID_AUDIO_MUTE, .name = "Mute", .minimum = 0, @@ -177,7 +175,7 @@ static struct v4l2_queryctrl wm8739_qctrl[] = { .default_value = 1, .flags = 0, .type = V4L2_CTRL_TYPE_BOOLEAN, - },{ + }, { .id = V4L2_CID_AUDIO_BALANCE, .name = "Balance", .minimum = 0, @@ -191,7 +189,7 @@ static struct v4l2_queryctrl wm8739_qctrl[] = { /* ------------------------------------------------------------------------ */ -static int wm8739_command(struct i2c_client *client, unsigned int cmd, void *arg) +static int wm8739_command(struct i2c_client *client, unsigned cmd, void *arg) { struct wm8739_state *state = i2c_get_clientdata(client); @@ -201,21 +199,26 @@ static int wm8739_command(struct i2c_client *client, unsigned int cmd, void *arg u32 audiofreq = *(u32 *)arg; state->clock_freq = audiofreq; - wm8739_write(client, R9, 0x000); /* de-activate */ + /* de-activate */ + wm8739_write(client, R9, 0x000); switch (audiofreq) { case 44100: - wm8739_write(client, R8, 0x020); /* 256fps, fs=44.1k */ + /* 256fps, fs=44.1k */ + wm8739_write(client, R8, 0x020); break; case 48000: - wm8739_write(client, R8, 0x000); /* 256fps, fs=48k */ + /* 256fps, fs=48k */ + wm8739_write(client, R8, 0x000); break; case 32000: - wm8739_write(client, R8, 0x018); /* 256fps, fs=32k */ + /* 256fps, fs=32k */ + wm8739_write(client, R8, 0x018); break; default: break; } - wm8739_write(client, R9, 0x001); /* activate */ + /* activate */ + wm8739_write(client, R9, 0x001); break; } @@ -239,7 +242,8 @@ static int wm8739_command(struct i2c_client *client, unsigned int cmd, void *arg } case VIDIOC_G_CHIP_IDENT: - return v4l2_chip_ident_i2c_client(client, arg, V4L2_IDENT_WM8739, 0); + return v4l2_chip_ident_i2c_client(client, + arg, V4L2_IDENT_WM8739, 0); case VIDIOC_LOG_STATUS: v4l_info(client, "Frequency: %u Hz\n", state->clock_freq); @@ -268,7 +272,8 @@ static int wm8739_probe(struct i2c_client *client) if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -EIO; - v4l_info(client, "chip found @ 0x%x (%s)\n", client->addr << 1, client->adapter->name); + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); state = kmalloc(sizeof(struct wm8739_state), GFP_KERNEL); if (state == NULL) { @@ -284,17 +289,23 @@ static int wm8739_probe(struct i2c_client *client) state->clock_freq = 48000; i2c_set_clientdata(client, state); - /* initialize wm8739 */ - wm8739_write(client, R15, 0x00); /* reset */ - wm8739_write(client, R5, 0x000); /* filter setting, high path, offet clear */ - wm8739_write(client, R6, 0x000); /* ADC, OSC, Power Off mode Disable */ - wm8739_write(client, R7, 0x049); /* Digital Audio interface format */ - /* Enable Master mode */ - /* 24 bit, MSB first/left justified */ - wm8739_write(client, R8, 0x000); /* sampling control */ - /* normal, 256fs, 48KHz sampling rate */ - wm8739_write(client, R9, 0x001); /* activate */ - wm8739_set_audio(client); /* set volume/mute */ + /* Initialize wm8739 */ + + /* reset */ + wm8739_write(client, R15, 0x00); + /* filter setting, high path, offet clear */ + wm8739_write(client, R5, 0x000); + /* ADC, OSC, Power Off mode Disable */ + wm8739_write(client, R6, 0x000); + /* Digital Audio interface format: + Enable Master mode, 24 bit, MSB first/left justified */ + wm8739_write(client, R7, 0x049); + /* sampling control: normal, 256fs, 48KHz sampling rate */ + wm8739_write(client, R8, 0x000); + /* activate */ + wm8739_write(client, R9, 0x001); + /* set volume/mute */ + wm8739_set_audio(client); return 0; } -- cgit v1.2.3-59-g8ed1b From 4c05de9c971b70a61d81cd2f1c78db85e2632d1c Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 1 Nov 2007 07:54:57 -0300 Subject: V4L/DVB (6739): cs53l32a: codingstyle cleanups Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cs53l32a.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/cs53l32a.c b/drivers/media/video/cs53l32a.c index 65bb6afd8df7..f41bfde045fe 100644 --- a/drivers/media/video/cs53l32a.c +++ b/drivers/media/video/cs53l32a.c @@ -35,7 +35,7 @@ MODULE_DESCRIPTION("i2c device driver for cs53l32a Audio ADC"); MODULE_AUTHOR("Martin Vaughan"); MODULE_LICENSE("GPL"); -static int debug = 0; +static int debug; module_param(debug, bool, 0644); @@ -58,7 +58,7 @@ static int cs53l32a_read(struct i2c_client *client, u8 reg) return i2c_smbus_read_byte_data(client, reg); } -static int cs53l32a_command(struct i2c_client *client, unsigned int cmd, void *arg) +static int cs53l32a_command(struct i2c_client *client, unsigned cmd, void *arg) { struct v4l2_routing *route = arg; struct v4l2_control *ctrl = arg; @@ -105,7 +105,8 @@ static int cs53l32a_command(struct i2c_client *client, unsigned int cmd, void *a break; case VIDIOC_G_CHIP_IDENT: - return v4l2_chip_ident_i2c_client(client, arg, V4L2_IDENT_CS53l32A, 0); + return v4l2_chip_ident_i2c_client(client, + arg, V4L2_IDENT_CS53l32A, 0); case VIDIOC_LOG_STATUS: { @@ -144,7 +145,8 @@ static int cs53l32a_probe(struct i2c_client *client) snprintf(client->name, sizeof(client->name) - 1, "cs53l32a"); - v4l_info(client, "chip found @ 0x%x (%s)\n", client->addr << 1, client->adapter->name); + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); for (i = 1; i <= 7; i++) { u8 v = cs53l32a_read(client, i); -- cgit v1.2.3-59-g8ed1b From 574dec611f1578b52dd37df5c95f855a28652e42 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 1 Nov 2007 07:58:17 -0300 Subject: V4L/DVB (6740): tlv320aic23b: codingstyle cleanups Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tlv320aic23b.c | 63 ++++++++++++++++++++------------------ 1 file changed, 34 insertions(+), 29 deletions(-) diff --git a/drivers/media/video/tlv320aic23b.c b/drivers/media/video/tlv320aic23b.c index e906528348a9..dc7b9c220b90 100644 --- a/drivers/media/video/tlv320aic23b.c +++ b/drivers/media/video/tlv320aic23b.c @@ -57,37 +57,35 @@ static int tlv320aic23b_write(struct i2c_client *client, int reg, u16 val) return -1; } - for (i = 0; i < 3; i++) { - if (i2c_smbus_write_byte_data(client, (reg << 1) | - (val >> 8), val & 0xff) == 0) { + for (i = 0; i < 3; i++) + if (i2c_smbus_write_byte_data(client, + (reg << 1) | (val >> 8), val & 0xff) == 0) return 0; - } - } v4l_err(client, "I2C: cannot write %03x to register R%d\n", val, reg); return -1; } -static int tlv320aic23b_command(struct i2c_client *client, unsigned int cmd, - void *arg) +static int tlv320aic23b_command(struct i2c_client *client, + unsigned int cmd, void *arg) { struct tlv320aic23b_state *state = i2c_get_clientdata(client); struct v4l2_control *ctrl = arg; - u32* freq = arg; + u32 *freq = arg; switch (cmd) { case VIDIOC_INT_AUDIO_CLOCK_FREQ: switch (*freq) { - case 32000: /* set sample rate to 32 kHz */ - tlv320aic23b_write(client, 8, 0x018); - break; - case 44100: /* set sample rate to 44.1 kHz */ - tlv320aic23b_write(client, 8, 0x022); - break; - case 48000: /* set sample rate to 48 kHz */ - tlv320aic23b_write(client, 8, 0x000); - break; - default: - return -EINVAL; + case 32000: /* set sample rate to 32 kHz */ + tlv320aic23b_write(client, 8, 0x018); + break; + case 44100: /* set sample rate to 44.1 kHz */ + tlv320aic23b_write(client, 8, 0x022); + break; + case 48000: /* set sample rate to 48 kHz */ + tlv320aic23b_write(client, 8, 0x000); + break; + default: + return -EINVAL; } break; @@ -135,22 +133,29 @@ static int tlv320aic23b_probe(struct i2c_client *client) if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -EIO; - v4l_info(client, "chip found @ 0x%x (%s)\n", client->addr << 1, client->adapter->name); + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); state = kmalloc(sizeof(struct tlv320aic23b_state), GFP_KERNEL); - if (state == NULL) { + if (state == NULL) return -ENOMEM; - } state->muted = 0; i2c_set_clientdata(client, state); - /* initialize tlv320aic23b */ - tlv320aic23b_write(client, 15, 0x000); /* RESET */ - tlv320aic23b_write(client, 6, 0x00A); /* turn off DAC & mic input */ - tlv320aic23b_write(client, 7, 0x049); /* left-justified, 24-bit, master mode */ - tlv320aic23b_write(client, 0, 0x119); /* set gain on both channels to +3.0 dB */ - tlv320aic23b_write(client, 8, 0x000); /* set sample rate to 48 kHz */ - tlv320aic23b_write(client, 9, 0x001); /* activate digital interface */ + /* Initialize tlv320aic23b */ + + /* RESET */ + tlv320aic23b_write(client, 15, 0x000); + /* turn off DAC & mic input */ + tlv320aic23b_write(client, 6, 0x00A); + /* left-justified, 24-bit, master mode */ + tlv320aic23b_write(client, 7, 0x049); + /* set gain on both channels to +3.0 dB */ + tlv320aic23b_write(client, 0, 0x119); + /* set sample rate to 48 kHz */ + tlv320aic23b_write(client, 8, 0x000); + /* activate digital interface */ + tlv320aic23b_write(client, 9, 0x001); return 0; } -- cgit v1.2.3-59-g8ed1b From 737bd410e70c3daa02f203dec24351951e89d82f Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 1 Nov 2007 13:38:12 -0300 Subject: V4L/DVB (6741): cx2341x: codingstyle cleanups Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx2341x.c | 313 +++++++++++++++++++++++------------------- 1 file changed, 174 insertions(+), 139 deletions(-) diff --git a/drivers/media/video/cx2341x.c b/drivers/media/video/cx2341x.c index 62304255dcae..890c8867af1c 100644 --- a/drivers/media/video/cx2341x.c +++ b/drivers/media/video/cx2341x.c @@ -34,7 +34,7 @@ MODULE_DESCRIPTION("cx23415/6 driver"); MODULE_AUTHOR("Hans Verkuil"); MODULE_LICENSE("GPL"); -static int debug = 0; +static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Debug level (0-1)"); @@ -75,6 +75,7 @@ const u32 cx2341x_mpeg_ctrls[] = { V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS, 0 }; +EXPORT_SYMBOL(cx2341x_mpeg_ctrls); /* Map the control ID to the correct field in the cx2341x_mpeg_params @@ -281,13 +282,14 @@ static int cx2341x_set_ctrl(struct cx2341x_mpeg_params *params, int busy, return -EBUSY; params->stream_type = ctrl->value; params->video_encoding = - (params->stream_type == V4L2_MPEG_STREAM_TYPE_MPEG1_SS || - params->stream_type == V4L2_MPEG_STREAM_TYPE_MPEG1_VCD) ? - V4L2_MPEG_VIDEO_ENCODING_MPEG_1 : V4L2_MPEG_VIDEO_ENCODING_MPEG_2; - if (params->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1) { + (params->stream_type == V4L2_MPEG_STREAM_TYPE_MPEG1_SS || + params->stream_type == V4L2_MPEG_STREAM_TYPE_MPEG1_VCD) ? + V4L2_MPEG_VIDEO_ENCODING_MPEG_1 : + V4L2_MPEG_VIDEO_ENCODING_MPEG_2; + if (params->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1) /* MPEG-1 implies CBR */ - params->video_bitrate_mode = V4L2_MPEG_VIDEO_BITRATE_MODE_CBR; - } + params->video_bitrate_mode = + V4L2_MPEG_VIDEO_BITRATE_MODE_CBR; break; case V4L2_CID_MPEG_STREAM_VBI_FMT: params->stream_vbi_fmt = ctrl->value; @@ -334,7 +336,8 @@ static int cx2341x_set_ctrl(struct cx2341x_mpeg_params *params, int busy, return 0; } -static int cx2341x_ctrl_query_fill(struct v4l2_queryctrl *qctrl, s32 min, s32 max, s32 step, s32 def) +static int cx2341x_ctrl_query_fill(struct v4l2_queryctrl *qctrl, + s32 min, s32 max, s32 step, s32 def) { const char *name; @@ -417,7 +420,8 @@ static int cx2341x_ctrl_query_fill(struct v4l2_queryctrl *qctrl, s32 min, s32 ma return 0; } -int cx2341x_ctrl_query(struct cx2341x_mpeg_params *params, struct v4l2_queryctrl *qctrl) +int cx2341x_ctrl_query(struct cx2341x_mpeg_params *params, + struct v4l2_queryctrl *qctrl) { int err; @@ -440,7 +444,8 @@ int cx2341x_ctrl_query(struct cx2341x_mpeg_params *params, struct v4l2_queryctrl case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: err = v4l2_ctrl_query_fill_std(qctrl); - if (err == 0 && params->audio_mode != V4L2_MPEG_AUDIO_MODE_JOINT_STEREO) + if (err == 0 && + params->audio_mode != V4L2_MPEG_AUDIO_MODE_JOINT_STEREO) qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; return err; @@ -455,13 +460,16 @@ int cx2341x_ctrl_query(struct cx2341x_mpeg_params *params, struct v4l2_queryctrl case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: err = v4l2_ctrl_query_fill_std(qctrl); - if (err == 0 && params->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1) + if (err == 0 && + params->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1) qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; return err; case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: err = v4l2_ctrl_query_fill_std(qctrl); - if (err == 0 && params->video_bitrate_mode == V4L2_MPEG_VIDEO_BITRATE_MODE_CBR) + if (err == 0 && + params->video_bitrate_mode == + V4L2_MPEG_VIDEO_BITRATE_MODE_CBR) qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; return err; @@ -476,80 +484,90 @@ int cx2341x_ctrl_query(struct cx2341x_mpeg_params *params, struct v4l2_queryctrl /* CX23415/6 specific */ case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE: return cx2341x_ctrl_query_fill(qctrl, - V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL, - V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO, 1, - V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL); + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL, + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO, 1, + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL); case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER: cx2341x_ctrl_query_fill(qctrl, 0, 15, 1, 0); qctrl->flags |= V4L2_CTRL_FLAG_SLIDER; - if (params->video_spatial_filter_mode == V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO) - qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + if (params->video_spatial_filter_mode == + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; return 0; case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE: cx2341x_ctrl_query_fill(qctrl, - V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF, - V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE, 1, - V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF); - if (params->video_spatial_filter_mode == V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO) - qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF, + V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE, + 1, + V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF); + if (params->video_spatial_filter_mode == + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; return 0; case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE: cx2341x_ctrl_query_fill(qctrl, - V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF, - V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR, 1, - V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF); - if (params->video_spatial_filter_mode == V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO) - qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF, + V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR, + 1, + V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF); + if (params->video_spatial_filter_mode == + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; return 0; case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE: return cx2341x_ctrl_query_fill(qctrl, - V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL, - V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO, 1, - V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL); + V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL, + V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO, 1, + V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL); case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER: cx2341x_ctrl_query_fill(qctrl, 0, 31, 1, 0); qctrl->flags |= V4L2_CTRL_FLAG_SLIDER; - if (params->video_temporal_filter_mode == V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO) - qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + if (params->video_temporal_filter_mode == + V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; return 0; case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE: return cx2341x_ctrl_query_fill(qctrl, - V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF, - V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG, 1, - V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF); + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF, + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG, 1, + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF); case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP: cx2341x_ctrl_query_fill(qctrl, 0, 255, 1, 255); qctrl->flags |= V4L2_CTRL_FLAG_SLIDER; - if (params->video_median_filter_type == V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF) - qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + if (params->video_median_filter_type == + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; return 0; case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM: cx2341x_ctrl_query_fill(qctrl, 0, 255, 1, 0); qctrl->flags |= V4L2_CTRL_FLAG_SLIDER; - if (params->video_median_filter_type == V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF) - qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + if (params->video_median_filter_type == + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; return 0; case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP: cx2341x_ctrl_query_fill(qctrl, 0, 255, 1, 255); qctrl->flags |= V4L2_CTRL_FLAG_SLIDER; - if (params->video_median_filter_type == V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF) - qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + if (params->video_median_filter_type == + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; return 0; case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM: cx2341x_ctrl_query_fill(qctrl, 0, 255, 1, 0); qctrl->flags |= V4L2_CTRL_FLAG_SLIDER; - if (params->video_median_filter_type == V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF) - qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; + if (params->video_median_filter_type == + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF) + qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE; return 0; case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS: @@ -560,6 +578,7 @@ int cx2341x_ctrl_query(struct cx2341x_mpeg_params *params, struct v4l2_queryctrl } } +EXPORT_SYMBOL(cx2341x_ctrl_query); const char **cx2341x_ctrl_get_menu(u32 id) { @@ -629,6 +648,7 @@ const char **cx2341x_ctrl_get_menu(u32 id) return v4l2_ctrl_get_menu(id); } } +EXPORT_SYMBOL(cx2341x_ctrl_get_menu); static void cx2341x_calc_audio_properties(struct cx2341x_mpeg_params *params) { @@ -637,9 +657,8 @@ static void cx2341x_calc_audio_properties(struct cx2341x_mpeg_params *params) ((1 + params->audio_l2_bitrate) << 4) | (params->audio_mode << 8) | (params->audio_mode_extension << 10) | - (((params->audio_emphasis == V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17) ? - 3 : - params->audio_emphasis) << 12) | + (((params->audio_emphasis == V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17) + ? 3 : params->audio_emphasis) << 12) | (params->audio_crc << 14); } @@ -679,19 +698,19 @@ int cx2341x_ext_ctrls(struct cx2341x_mpeg_params *params, int busy, if (err) break; } - if (err == 0 && params->video_bitrate_mode == V4L2_MPEG_VIDEO_BITRATE_MODE_VBR && - params->video_bitrate_peak < params->video_bitrate) { + if (err == 0 && + params->video_bitrate_mode == V4L2_MPEG_VIDEO_BITRATE_MODE_VBR && + params->video_bitrate_peak < params->video_bitrate) { err = -ERANGE; ctrls->error_idx = ctrls->count; } - if (err) { + if (err) ctrls->error_idx = i; - } - else { + else cx2341x_calc_audio_properties(params); - } return err; } +EXPORT_SYMBOL(cx2341x_ext_ctrls); void cx2341x_fill_defaults(struct cx2341x_mpeg_params *p) { @@ -732,13 +751,18 @@ void cx2341x_fill_defaults(struct cx2341x_mpeg_params *p) .video_mute_yuv = 0x008080, /* YCbCr value for black */ /* encoding filters */ - .video_spatial_filter_mode = V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL, + .video_spatial_filter_mode = + V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL, .video_spatial_filter = 0, - .video_luma_spatial_filter_type = V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR, - .video_chroma_spatial_filter_type = V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR, - .video_temporal_filter_mode = V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL, + .video_luma_spatial_filter_type = + V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR, + .video_chroma_spatial_filter_type = + V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR, + .video_temporal_filter_mode = + V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL, .video_temporal_filter = 8, - .video_median_filter_type = V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF, + .video_median_filter_type = + V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF, .video_luma_median_filter_top = 255, .video_luma_median_filter_bottom = 0, .video_chroma_median_filter_top = 255, @@ -748,8 +772,10 @@ void cx2341x_fill_defaults(struct cx2341x_mpeg_params *p) *p = default_params; cx2341x_calc_audio_properties(p); } +EXPORT_SYMBOL(cx2341x_fill_defaults); -static int cx2341x_api(void *priv, cx2341x_mbox_func func, int cmd, int args, ...) +static int cx2341x_api(void *priv, cx2341x_mbox_func func, + int cmd, int args, ...) { u32 data[CX2341X_MBOX_MAX_DATA]; va_list vargs; @@ -757,15 +783,17 @@ static int cx2341x_api(void *priv, cx2341x_mbox_func func, int cmd, int args, .. va_start(vargs, args); - for (i = 0; i < args; i++) { + for (i = 0; i < args; i++) data[i] = va_arg(vargs, int); - } va_end(vargs); return func(priv, cmd, args, 0, data); } +#define NEQ(field) (old->field != new->field) + int cx2341x_update(void *priv, cx2341x_mbox_func func, - const struct cx2341x_mpeg_params *old, const struct cx2341x_mpeg_params *new) + const struct cx2341x_mpeg_params *old, + const struct cx2341x_mpeg_params *new) { static int mpeg_stream_type[] = { 0, /* MPEG-2 PS */ @@ -777,17 +805,18 @@ int cx2341x_update(void *priv, cx2341x_mbox_func func, }; int err = 0; + int force = (old == NULL); u16 temporal = new->video_temporal_filter; cx2341x_api(priv, func, CX2341X_ENC_SET_OUTPUT_PORT, 2, new->port, 0); - if (old == NULL || old->is_50hz != new->is_50hz) { - err = cx2341x_api(priv, func, CX2341X_ENC_SET_FRAME_RATE, 1, new->is_50hz); + if (force || NEQ(is_50hz)) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_FRAME_RATE, 1, + new->is_50hz); if (err) return err; } - if (old == NULL || old->width != new->width || old->height != new->height || - old->video_encoding != new->video_encoding) { + if (force || NEQ(width) || NEQ(height) || NEQ(video_encoding)) { u16 w = new->width; u16 h = new->height; @@ -795,69 +824,74 @@ int cx2341x_update(void *priv, cx2341x_mbox_func func, w /= 2; h /= 2; } - err = cx2341x_api(priv, func, CX2341X_ENC_SET_FRAME_SIZE, 2, h, w); + err = cx2341x_api(priv, func, CX2341X_ENC_SET_FRAME_SIZE, 2, + h, w); if (err) return err; } if (new->width != 720 || new->height != (new->is_50hz ? 576 : 480)) { - /* Adjust temporal filter if necessary. The problem with the temporal - filter is that it works well with full resolution capturing, but - not when the capture window is scaled (the filter introduces - a ghosting effect). So if the capture window is scaled, then - force the filter to 0. + /* Adjust temporal filter if necessary. The problem with the + temporal filter is that it works well with full resolution + capturing, but not when the capture window is scaled (the + filter introduces a ghosting effect). So if the capture + window is scaled, then force the filter to 0. For full resolution the filter really improves the video - quality, especially if the original video quality is suboptimal. */ + quality, especially if the original video quality is + suboptimal. */ temporal = 0; } - if (old == NULL || old->stream_type != new->stream_type) { - err = cx2341x_api(priv, func, CX2341X_ENC_SET_STREAM_TYPE, 1, mpeg_stream_type[new->stream_type]); + if (force || NEQ(stream_type)) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_STREAM_TYPE, 1, + mpeg_stream_type[new->stream_type]); if (err) return err; } - if (old == NULL || old->video_aspect != new->video_aspect) { - err = cx2341x_api(priv, func, CX2341X_ENC_SET_ASPECT_RATIO, 1, 1 + new->video_aspect); + if (force || NEQ(video_aspect)) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_ASPECT_RATIO, 1, + 1 + new->video_aspect); if (err) return err; } - if (old == NULL || old->video_b_frames != new->video_b_frames || - old->video_gop_size != new->video_gop_size) { + if (force || NEQ(video_b_frames) || NEQ(video_gop_size)) { err = cx2341x_api(priv, func, CX2341X_ENC_SET_GOP_PROPERTIES, 2, new->video_gop_size, new->video_b_frames + 1); if (err) return err; } - if (old == NULL || old->video_gop_closure != new->video_gop_closure) { - err = cx2341x_api(priv, func, CX2341X_ENC_SET_GOP_CLOSURE, 1, new->video_gop_closure); + if (force || NEQ(video_gop_closure)) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_GOP_CLOSURE, 1, + new->video_gop_closure); if (err) return err; } - if (old == NULL || old->audio_properties != new->audio_properties) { - err = cx2341x_api(priv, func, CX2341X_ENC_SET_AUDIO_PROPERTIES, 1, new->audio_properties); + if (force || NEQ(audio_properties)) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_AUDIO_PROPERTIES, + 1, new->audio_properties); if (err) return err; } - if (old == NULL || old->audio_mute != new->audio_mute) { - err = cx2341x_api(priv, func, CX2341X_ENC_MUTE_AUDIO, 1, new->audio_mute); + if (force || NEQ(audio_mute)) { + err = cx2341x_api(priv, func, CX2341X_ENC_MUTE_AUDIO, 1, + new->audio_mute); if (err) return err; } - if (old == NULL || old->video_bitrate_mode != new->video_bitrate_mode || - old->video_bitrate != new->video_bitrate || - old->video_bitrate_peak != new->video_bitrate_peak) { + if (force || NEQ(video_bitrate_mode) || NEQ(video_bitrate) || + NEQ(video_bitrate_peak)) { err = cx2341x_api(priv, func, CX2341X_ENC_SET_BIT_RATE, 5, new->video_bitrate_mode, new->video_bitrate, new->video_bitrate_peak / 400, 0, 0); if (err) return err; } - if (old == NULL || old->video_spatial_filter_mode != new->video_spatial_filter_mode || - old->video_temporal_filter_mode != new->video_temporal_filter_mode || - old->video_median_filter_type != new->video_median_filter_type) { - err = cx2341x_api(priv, func, CX2341X_ENC_SET_DNR_FILTER_MODE, 2, - new->video_spatial_filter_mode | (new->video_temporal_filter_mode << 1), + if (force || NEQ(video_spatial_filter_mode) || + NEQ(video_temporal_filter_mode) || + NEQ(video_median_filter_type)) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_DNR_FILTER_MODE, + 2, new->video_spatial_filter_mode | + (new->video_temporal_filter_mode << 1), new->video_median_filter_type); if (err) return err; } - if (old == NULL || - old->video_luma_median_filter_bottom != new->video_luma_median_filter_bottom || - old->video_luma_median_filter_top != new->video_luma_median_filter_top || - old->video_chroma_median_filter_bottom != new->video_chroma_median_filter_bottom || - old->video_chroma_median_filter_top != new->video_chroma_median_filter_top) { + if (force || NEQ(video_luma_median_filter_bottom) || + NEQ(video_luma_median_filter_top) || + NEQ(video_chroma_median_filter_bottom) || + NEQ(video_chroma_median_filter_top)) { err = cx2341x_api(priv, func, CX2341X_ENC_SET_CORING_LEVELS, 4, new->video_luma_median_filter_bottom, new->video_luma_median_filter_top, @@ -865,36 +899,39 @@ int cx2341x_update(void *priv, cx2341x_mbox_func func, new->video_chroma_median_filter_top); if (err) return err; } - if (old == NULL || - old->video_luma_spatial_filter_type != new->video_luma_spatial_filter_type || - old->video_chroma_spatial_filter_type != new->video_chroma_spatial_filter_type) { - err = cx2341x_api(priv, func, CX2341X_ENC_SET_SPATIAL_FILTER_TYPE, 2, - new->video_luma_spatial_filter_type, new->video_chroma_spatial_filter_type); + if (force || NEQ(video_luma_spatial_filter_type) || + NEQ(video_chroma_spatial_filter_type)) { + err = cx2341x_api(priv, func, + CX2341X_ENC_SET_SPATIAL_FILTER_TYPE, + 2, new->video_luma_spatial_filter_type, + new->video_chroma_spatial_filter_type); if (err) return err; } - if (old == NULL || - old->video_spatial_filter != new->video_spatial_filter || - old->video_temporal_filter != temporal) { - err = cx2341x_api(priv, func, CX2341X_ENC_SET_DNR_FILTER_PROPS, 2, - new->video_spatial_filter, temporal); + if (force || NEQ(video_spatial_filter) || + old->video_temporal_filter != temporal) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_DNR_FILTER_PROPS, + 2, new->video_spatial_filter, temporal); if (err) return err; } - if (old == NULL || old->video_temporal_decimation != new->video_temporal_decimation) { - err = cx2341x_api(priv, func, CX2341X_ENC_SET_FRAME_DROP_RATE, 1, - new->video_temporal_decimation); + if (force || NEQ(video_temporal_decimation)) { + err = cx2341x_api(priv, func, CX2341X_ENC_SET_FRAME_DROP_RATE, + 1, new->video_temporal_decimation); if (err) return err; } - if (old == NULL || old->video_mute != new->video_mute || - (new->video_mute && old->video_mute_yuv != new->video_mute_yuv)) { - err = cx2341x_api(priv, func, CX2341X_ENC_MUTE_VIDEO, 1, new->video_mute | (new->video_mute_yuv << 8)); + if (force || NEQ(video_mute) || + (new->video_mute && NEQ(video_mute_yuv))) { + err = cx2341x_api(priv, func, CX2341X_ENC_MUTE_VIDEO, 1, + new->video_mute | (new->video_mute_yuv << 8)); if (err) return err; } - if (old == NULL || old->stream_insert_nav_packets != new->stream_insert_nav_packets) { - err = cx2341x_api(priv, func, CX2341X_ENC_MISC, 2, 7, new->stream_insert_nav_packets); + if (force || NEQ(stream_insert_nav_packets)) { + err = cx2341x_api(priv, func, CX2341X_ENC_MISC, 2, + 7, new->stream_insert_nav_packets); if (err) return err; } return 0; } +EXPORT_SYMBOL(cx2341x_update); static const char *cx2341x_menu_item(struct cx2341x_mpeg_params *p, u32 id) { @@ -943,18 +980,17 @@ void cx2341x_log_status(struct cx2341x_mpeg_params *p, const char *prefix) cx2341x_menu_item(p, V4L2_CID_MPEG_VIDEO_ASPECT), cx2341x_menu_item(p, V4L2_CID_MPEG_VIDEO_BITRATE_MODE), p->video_bitrate); - if (p->video_bitrate_mode == V4L2_MPEG_VIDEO_BITRATE_MODE_VBR) { + if (p->video_bitrate_mode == V4L2_MPEG_VIDEO_BITRATE_MODE_VBR) printk(", Peak %d", p->video_bitrate_peak); - } printk("\n"); - printk(KERN_INFO "%s: Video: GOP Size %d, %d B-Frames, %sGOP Closure\n", + printk(KERN_INFO + "%s: Video: GOP Size %d, %d B-Frames, %sGOP Closure\n", prefix, p->video_gop_size, p->video_b_frames, p->video_gop_closure ? "" : "No "); - if (p->video_temporal_decimation) { + if (p->video_temporal_decimation) printk(KERN_INFO "%s: Video: Temporal Decimation %d\n", prefix, p->video_temporal_decimation); - } /* Audio */ printk(KERN_INFO "%s: Audio: %s, %s, %s, %s%s", @@ -964,10 +1000,9 @@ void cx2341x_log_status(struct cx2341x_mpeg_params *p, const char *prefix) cx2341x_menu_item(p, V4L2_CID_MPEG_AUDIO_L2_BITRATE), cx2341x_menu_item(p, V4L2_CID_MPEG_AUDIO_MODE), p->audio_mute ? " (muted)" : ""); - if (p->audio_mode == V4L2_MPEG_AUDIO_MODE_JOINT_STEREO) { - printk(", %s", - cx2341x_menu_item(p, V4L2_CID_MPEG_AUDIO_MODE_EXTENSION)); - } + if (p->audio_mode == V4L2_MPEG_AUDIO_MODE_JOINT_STEREO) + printk(", %s", cx2341x_menu_item(p, + V4L2_CID_MPEG_AUDIO_MODE_EXTENSION)); printk(", %s, %s\n", cx2341x_menu_item(p, V4L2_CID_MPEG_AUDIO_EMPHASIS), cx2341x_menu_item(p, V4L2_CID_MPEG_AUDIO_CRC)); @@ -975,33 +1010,33 @@ void cx2341x_log_status(struct cx2341x_mpeg_params *p, const char *prefix) /* Encoding filters */ printk(KERN_INFO "%s: Spatial Filter: %s, Luma %s, Chroma %s, %d\n", prefix, - cx2341x_menu_item(p, V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE), - cx2341x_menu_item(p, V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE), - cx2341x_menu_item(p, V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE), + cx2341x_menu_item(p, + V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE), + cx2341x_menu_item(p, + V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE), + cx2341x_menu_item(p, + V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE), p->video_spatial_filter); - if (p->width != 720 || p->height != (p->is_50hz ? 576 : 480)) { + + if (p->width != 720 || p->height != (p->is_50hz ? 576 : 480)) temporal = 0; - } + printk(KERN_INFO "%s: Temporal Filter: %s, %d\n", prefix, - cx2341x_menu_item(p, V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE), + cx2341x_menu_item(p, + V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE), temporal); - printk(KERN_INFO "%s: Median Filter: %s, Luma [%d, %d], Chroma [%d, %d]\n", + printk(KERN_INFO + "%s: Median Filter: %s, Luma [%d, %d], Chroma [%d, %d]\n", prefix, - cx2341x_menu_item(p, V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE), + cx2341x_menu_item(p, + V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE), p->video_luma_median_filter_bottom, p->video_luma_median_filter_top, p->video_chroma_median_filter_bottom, p->video_chroma_median_filter_top); } - -EXPORT_SYMBOL(cx2341x_fill_defaults); -EXPORT_SYMBOL(cx2341x_ctrl_query); -EXPORT_SYMBOL(cx2341x_ctrl_get_menu); -EXPORT_SYMBOL(cx2341x_ext_ctrls); -EXPORT_SYMBOL(cx2341x_update); EXPORT_SYMBOL(cx2341x_log_status); -EXPORT_SYMBOL(cx2341x_mpeg_ctrls); /* * Local variables: -- cgit v1.2.3-59-g8ed1b From 6b1e56763b50f169d8446c43df6adb70f69552db Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 2 Dec 2007 06:56:00 -0300 Subject: V4L/DVB (6742): ivtv: fix incorrect debug message Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c index ebc200320e6f..c5ea54e65272 100644 --- a/drivers/media/video/ivtv/ivtv-irq.c +++ b/drivers/media/video/ivtv/ivtv-irq.c @@ -436,7 +436,7 @@ static void ivtv_dma_enc_start(struct ivtv_stream *s) s_vbi->sg_pending_size = 0; s_vbi->dma_xfer_cnt++; set_bit(IVTV_F_S_DMA_HAS_VBI, &s->s_flags); - IVTV_DEBUG_HI_DMA("include DMA for %s\n", s->name); + IVTV_DEBUG_HI_DMA("include DMA for %s\n", s_vbi->name); } s->dma_xfer_cnt++; -- cgit v1.2.3-59-g8ed1b From 4a56eb3f535f92b0585aa01dba05b3f17a547df0 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 2 Dec 2007 07:03:45 -0300 Subject: V4L/DVB (6743): cx25840: fix endianness inconsistency cx25840_read4 reads a little-endian 32-bit value whereas cx25840_write4 writes the 32-bit value as big-endian. Convert write4 to use little-endian as well (that's the correct endianness). Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx25840/cx25840-audio.c | 70 ++++++++++++++--------------- drivers/media/video/cx25840/cx25840-core.c | 8 ++-- 2 files changed, 39 insertions(+), 39 deletions(-) diff --git a/drivers/media/video/cx25840/cx25840-audio.c b/drivers/media/video/cx25840/cx25840-audio.c index 3d46a776df36..51fc0af01578 100644 --- a/drivers/media/video/cx25840/cx25840-audio.c +++ b/drivers/media/video/cx25840/cx25840-audio.c @@ -38,71 +38,71 @@ static int set_audclk_freq(struct i2c_client *client, u32 freq) switch (freq) { case 32000: /* VID_PLL and AUX_PLL */ - cx25840_write4(client, 0x108, 0x0f040610); + cx25840_write4(client, 0x108, 0x1006040f); /* AUX_PLL_FRAC */ - cx25840_write4(client, 0x110, 0xee39bb01); + cx25840_write4(client, 0x110, 0x01bb39ee); if (state->is_cx25836) break; /* src3/4/6_ctl = 0x0801f77f */ - cx25840_write4(client, 0x900, 0x7ff70108); - cx25840_write4(client, 0x904, 0x7ff70108); - cx25840_write4(client, 0x90c, 0x7ff70108); + cx25840_write4(client, 0x900, 0x0801f77f); + cx25840_write4(client, 0x904, 0x0801f77f); + cx25840_write4(client, 0x90c, 0x0801f77f); break; case 44100: /* VID_PLL and AUX_PLL */ - cx25840_write4(client, 0x108, 0x0f040910); + cx25840_write4(client, 0x108, 0x1009040f); /* AUX_PLL_FRAC */ - cx25840_write4(client, 0x110, 0xd66bec00); + cx25840_write4(client, 0x110, 0x00ec6bd6); if (state->is_cx25836) break; /* src3/4/6_ctl = 0x08016d59 */ - cx25840_write4(client, 0x900, 0x596d0108); - cx25840_write4(client, 0x904, 0x596d0108); - cx25840_write4(client, 0x90c, 0x596d0108); + cx25840_write4(client, 0x900, 0x08016d59); + cx25840_write4(client, 0x904, 0x08016d59); + cx25840_write4(client, 0x90c, 0x08016d59); break; case 48000: /* VID_PLL and AUX_PLL */ - cx25840_write4(client, 0x108, 0x0f040a10); + cx25840_write4(client, 0x108, 0x100a040f); /* AUX_PLL_FRAC */ - cx25840_write4(client, 0x110, 0xe5d69800); + cx25840_write4(client, 0x110, 0x0098d6e5); if (state->is_cx25836) break; /* src3/4/6_ctl = 0x08014faa */ - cx25840_write4(client, 0x900, 0xaa4f0108); - cx25840_write4(client, 0x904, 0xaa4f0108); - cx25840_write4(client, 0x90c, 0xaa4f0108); + cx25840_write4(client, 0x900, 0x08014faa); + cx25840_write4(client, 0x904, 0x08014faa); + cx25840_write4(client, 0x90c, 0x08014faa); break; } } else { switch (freq) { case 32000: /* VID_PLL and AUX_PLL */ - cx25840_write4(client, 0x108, 0x0f04081e); + cx25840_write4(client, 0x108, 0x1e08040f); /* AUX_PLL_FRAC */ - cx25840_write4(client, 0x110, 0x69082a01); + cx25840_write4(client, 0x110, 0x012a0869); if (state->is_cx25836) break; /* src1_ctl = 0x08010000 */ - cx25840_write4(client, 0x8f8, 0x00000108); + cx25840_write4(client, 0x8f8, 0x08010000); /* src3/4/6_ctl = 0x08020000 */ - cx25840_write4(client, 0x900, 0x00000208); - cx25840_write4(client, 0x904, 0x00000208); - cx25840_write4(client, 0x90c, 0x00000208); + cx25840_write4(client, 0x900, 0x08020000); + cx25840_write4(client, 0x904, 0x08020000); + cx25840_write4(client, 0x90c, 0x08020000); /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x14 */ cx25840_write(client, 0x127, 0x54); @@ -110,40 +110,40 @@ static int set_audclk_freq(struct i2c_client *client, u32 freq) case 44100: /* VID_PLL and AUX_PLL */ - cx25840_write4(client, 0x108, 0x0f040918); + cx25840_write4(client, 0x108, 0x1809040f); /* AUX_PLL_FRAC */ - cx25840_write4(client, 0x110, 0xd66bec00); + cx25840_write4(client, 0x110, 0x00ec6bd6); if (state->is_cx25836) break; /* src1_ctl = 0x08010000 */ - cx25840_write4(client, 0x8f8, 0xcd600108); + cx25840_write4(client, 0x8f8, 0x080160cd); /* src3/4/6_ctl = 0x08020000 */ - cx25840_write4(client, 0x900, 0x85730108); - cx25840_write4(client, 0x904, 0x85730108); - cx25840_write4(client, 0x90c, 0x85730108); + cx25840_write4(client, 0x900, 0x08017385); + cx25840_write4(client, 0x904, 0x08017385); + cx25840_write4(client, 0x90c, 0x08017385); break; case 48000: /* VID_PLL and AUX_PLL */ - cx25840_write4(client, 0x108, 0x0f040a18); + cx25840_write4(client, 0x108, 0x180a040f); /* AUX_PLL_FRAC */ - cx25840_write4(client, 0x110, 0xe5d69800); + cx25840_write4(client, 0x110, 0x0098d6e5); if (state->is_cx25836) break; /* src1_ctl = 0x08010000 */ - cx25840_write4(client, 0x8f8, 0x00800108); + cx25840_write4(client, 0x8f8, 0x08018000); /* src3/4/6_ctl = 0x08020000 */ - cx25840_write4(client, 0x900, 0x55550108); - cx25840_write4(client, 0x904, 0x55550108); - cx25840_write4(client, 0x90c, 0x55550108); + cx25840_write4(client, 0x900, 0x08015555); + cx25840_write4(client, 0x904, 0x08015555); + cx25840_write4(client, 0x90c, 0x08015555); break; } } @@ -168,14 +168,14 @@ void cx25840_audio_set_path(struct i2c_client *client) if (state->aud_input == CX25840_AUDIO_SERIAL) { /* Set Path1 to Serial Audio Input */ - cx25840_write4(client, 0x8d0, 0x12100101); + cx25840_write4(client, 0x8d0, 0x01011012); /* The microcontroller should not be started for the * non-tuner inputs: autodetection is specific for * TV audio. */ } else { /* Set Path1 to Analog Demod Main Channel */ - cx25840_write4(client, 0x8d0, 0x7038061f); + cx25840_write4(client, 0x8d0, 0x1f063870); } set_audclk_freq(client, state->audclk_freq); diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index 6d2ca822a638..0d3d24aff504 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -73,10 +73,10 @@ int cx25840_write4(struct i2c_client *client, u16 addr, u32 value) u8 buffer[6]; buffer[0] = addr >> 8; buffer[1] = addr & 0xff; - buffer[2] = value >> 24; - buffer[3] = (value >> 16) & 0xff; - buffer[4] = (value >> 8) & 0xff; - buffer[5] = value & 0xff; + buffer[2] = value & 0xff; + buffer[3] = (value >> 8) & 0xff; + buffer[4] = (value >> 16) & 0xff; + buffer[5] = value >> 24; return i2c_master_send(client, buffer, 6); } -- cgit v1.2.3-59-g8ed1b From 14e3c152a14cb96b5f584d3885d2aedf1a1353fc Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Fri, 7 Dec 2007 00:33:08 -0300 Subject: V4L/DVB (6745): tda18271: remove tuning offset for atsc/qam The tuning request coming in from userspace is already center adjusted, so we should not adjust to center (+1.75mhz) within the driver. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index e8f4ac2325da..aecc0a5ac7b3 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -584,7 +584,10 @@ static int tda18271_set_params(struct dvb_frontend *fe, __FUNCTION__); return -EINVAL; } +#if 0 + /* userspace request is already center adjusted */ freq += 1750000; /* Adjust to center (+1.75MHZ) */ +#endif bw = 6000000; } else if (fe->ops.info.type == FE_OFDM) { switch (params->u.ofdm.bandwidth) { -- cgit v1.2.3-59-g8ed1b From 105354a0f0410d4715f38e67d5790dead5dafdad Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 7 Dec 2007 17:57:38 -0300 Subject: V4L/DVB (6748): Subject: v4l: nopage Convert v4l from nopage to fault. Remove redundant vma range checks. Signed-off-by: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/videobuf-dma-sg.c | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-) diff --git a/drivers/media/video/videobuf-dma-sg.c b/drivers/media/video/videobuf-dma-sg.c index 44ee408e145f..eea5b4ecfc3d 100644 --- a/drivers/media/video/videobuf-dma-sg.c +++ b/drivers/media/video/videobuf-dma-sg.c @@ -385,30 +385,26 @@ videobuf_vm_close(struct vm_area_struct *vma) * now ...). Bounce buffers don't work very well for the data rates * video capture has. */ -static struct page* -videobuf_vm_nopage(struct vm_area_struct *vma, unsigned long vaddr, - int *type) +static int +videobuf_vm_fault(struct vm_area_struct *vma, struct vm_fault *vmf) { struct page *page; - dprintk(3,"nopage: fault @ %08lx [vma %08lx-%08lx]\n", - vaddr,vma->vm_start,vma->vm_end); - if (vaddr > vma->vm_end) - return NOPAGE_SIGBUS; + dprintk(3,"fault: fault @ %08lx [vma %08lx-%08lx]\n", + (unsigned long)vmf->virtual_address,vma->vm_start,vma->vm_end); page = alloc_page(GFP_USER | __GFP_DMA32); if (!page) - return NOPAGE_OOM; + return VM_FAULT_OOM; clear_user_page(page_address(page), vaddr, page); - if (type) - *type = VM_FAULT_MINOR; - return page; + vmf->page = page; + return 0; } static struct vm_operations_struct videobuf_vm_ops = { .open = videobuf_vm_open, .close = videobuf_vm_close, - .nopage = videobuf_vm_nopage, + .fault = videobuf_vm_fault, }; /* --------------------------------------------------------------------- -- cgit v1.2.3-59-g8ed1b From d172b8bdab3812a6ad710e4cc78ceea3e8a40cd5 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 7 Dec 2007 21:14:43 -0300 Subject: V4L/DVB (6749): v4l-nopage-fix dont just copy-and-paste stuff. (compile-tested this time) Signed-off-by: Andrew Morton Cc: Nick Piggin Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/videobuf-dma-sg.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/videobuf-dma-sg.c b/drivers/media/video/videobuf-dma-sg.c index eea5b4ecfc3d..98efd7ab1f50 100644 --- a/drivers/media/video/videobuf-dma-sg.c +++ b/drivers/media/video/videobuf-dma-sg.c @@ -395,7 +395,8 @@ videobuf_vm_fault(struct vm_area_struct *vma, struct vm_fault *vmf) page = alloc_page(GFP_USER | __GFP_DMA32); if (!page) return VM_FAULT_OOM; - clear_user_page(page_address(page), vaddr, page); + clear_user_page(page_address(page), (unsigned long)vmf->virtual_address, + page); vmf->page = page; return 0; } -- cgit v1.2.3-59-g8ed1b From d2761f227162f610d35b9d68564f5c64774be581 Mon Sep 17 00:00:00 2001 From: Albert Graham Date: Sun, 9 Dec 2007 09:44:38 -0300 Subject: V4L/DVB (6752): saa7134: Enable remote control support for Avermedia M102 This patch enabled the IR remote control for the Avermedia M102 (card=110), which appears to be the same IR as the already supported device on the Avermedia AVerTV GO 007 FM (card=57) model, the code is two one liners which enable the IR for this device (subsystem: 1461:f31e) Signed-off-by: Albert Graham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-cards.c | 1 + drivers/media/video/saa7134/saa7134-input.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 9a2dd643025b..b29427aaa88d 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -4544,6 +4544,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) break; case SAA7134_BOARD_AVERMEDIA_M102: /* enable tuner */ + dev->has_remote = SAA7134_REMOTE_GPIO; saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x8c040007, 0x8c040007); saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x0c0007cd, 0x0c0007cd); break; diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index a485185357c8..8cfeb2bde90f 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -260,6 +260,7 @@ int saa7134_input_init1(struct saa7134_dev *dev) case SAA7134_BOARD_AVERMEDIA_STUDIO_307: case SAA7134_BOARD_AVERMEDIA_STUDIO_507: case SAA7134_BOARD_AVERMEDIA_GO_007_FM: + case SAA7134_BOARD_AVERMEDIA_M102: ir_codes = ir_codes_avermedia; mask_keycode = 0x0007C8; mask_keydown = 0x000010; -- cgit v1.2.3-59-g8ed1b From f905c442e5b19f75fe4e8ce96f2acffa565f2392 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 10 Dec 2007 04:07:03 -0300 Subject: V4L/DVB (6753): Fix vivi to support non-zero minor node There were a trouble at vivi driver when using non-zero inodes. This where due to not properly preserving the minor inode after calling video_register. Since this driver is a reference for newer drivers, and it is possible to have more than one video device inside the machine, this patch makes vivi to dynamically allocate video_device struct. Thanks to Gregor Jasny for pointing the issue. Also, this patch removes a very anoying (but useless) message of not having a proper release call. CC: Gregor Jasny Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/vivi.c | 40 ++++++++++++++++++++++++++++++++-------- 1 file changed, 32 insertions(+), 8 deletions(-) diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index fe9784a0cc21..5ddaaa370cbc 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -170,7 +170,7 @@ struct vivi_dev { int users; /* various device info */ - struct video_device vfd; + struct video_device *vfd; struct vivi_dmaqueue vidq; @@ -986,7 +986,7 @@ static int vivi_open(struct inode *inode, struct file *file) printk(KERN_DEBUG "vivi: open called (minor=%d)\n",minor); list_for_each_entry(dev, &vivi_devlist, vivi_devlist) - if (dev->vfd.minor == minor) + if (dev->vfd->minor == minor) goto found; return -ENODEV; found: @@ -1067,7 +1067,7 @@ vivi_poll(struct file *file, struct poll_table_struct *wait) return videobuf_poll_stream(file, q, wait); } -static int vivi_release(struct inode *inode, struct file *file) +static int vivi_close(struct inode *inode, struct file *file) { struct vivi_fh *fh = file->private_data; struct vivi_dev *dev = fh->dev; @@ -1088,6 +1088,18 @@ static int vivi_release(struct inode *inode, struct file *file) return 0; } +static int vivi_release(struct vivi_dev *dev) +{ + if (-1 != dev->vfd->minor) + video_unregister_device(dev->vfd); + else + video_device_release(dev->vfd); + + dev->vfd = NULL; + + return 0; +} + static int vivi_mmap(struct file *file, struct vm_area_struct * vma) { @@ -1109,7 +1121,7 @@ vivi_mmap(struct file *file, struct vm_area_struct * vma) static const struct file_operations vivi_fops = { .owner = THIS_MODULE, .open = vivi_open, - .release = vivi_release, + .release = vivi_close, .read = vivi_read, .poll = vivi_poll, .ioctl = video_ioctl2, /* V4L2 ioctl handler */ @@ -1117,12 +1129,12 @@ static const struct file_operations vivi_fops = { .llseek = no_llseek, }; -static struct video_device vivi = { +static struct video_device vivi_template = { .name = "vivi", .type = VID_TYPE_CAPTURE, .fops = &vivi_fops, .minor = -1, -// .release = video_device_release, + .release = video_device_release, .vidioc_querycap = vidioc_querycap, .vidioc_enum_fmt_cap = vidioc_enum_fmt_cap, @@ -1156,6 +1168,7 @@ static int __init vivi_init(void) { int ret; struct vivi_dev *dev; + struct video_device *vfd; dev = kzalloc(sizeof(*dev),GFP_KERNEL); if (NULL == dev) @@ -1174,7 +1187,18 @@ static int __init vivi_init(void) dev->vidq.timeout.data = (unsigned long)dev; init_timer(&dev->vidq.timeout); - ret = video_register_device(&vivi, VFL_TYPE_GRABBER, video_nr); + vfd = video_device_alloc(); + if (NULL == vfd) + return -ENOMEM; + + *vfd = vivi_template; + + ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr); + snprintf(vfd->name, sizeof(vfd->name), "%s (%i)", + vivi_template.name, vfd->minor); + + dev->vfd = vfd; + printk(KERN_INFO "Video Technology Magazine Virtual Video Capture Board (Load status: %d)\n", ret); return ret; } @@ -1188,9 +1212,9 @@ static void __exit vivi_exit(void) list = vivi_devlist.next; list_del(list); h = list_entry(list, struct vivi_dev, vivi_devlist); + vivi_release(h); kfree (h); } - video_unregister_device(&vivi); } module_init(vivi_init); -- cgit v1.2.3-59-g8ed1b From 55712ff7e06b721fbeebd36499bad4a11b7d8327 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 10 Dec 2007 04:38:11 -0300 Subject: V4L/DVB (6754): Allow vivi to open multiple video devices Now, it is possible to open multiple vivi devices, by using n_devs parameter. This makes vivi driver closer to a real one. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/vivi.c | 106 ++++++++++++++++++++++++++------------------- 1 file changed, 62 insertions(+), 44 deletions(-) diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index 5ddaaa370cbc..fda01f49efdf 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -59,6 +59,7 @@ static unsigned int vid_limit = 16; /* Video memory limit, in Mb */ static struct video_device vivi; /* Video device */ static int video_nr = -1; /* /dev/videoN, -1 for autodetect */ +static int n_devs = 1; /* Number of virtual devices */ /* supported controls */ static struct v4l2_queryctrl vivi_qctrl[] = { @@ -1079,7 +1080,7 @@ static int vivi_close(struct inode *inode, struct file *file) videobuf_stop(&fh->vb_vidq); videobuf_mmap_free(&fh->vb_vidq); - kfree (fh); + kfree(fh); dev->users--; @@ -1088,14 +1089,23 @@ static int vivi_close(struct inode *inode, struct file *file) return 0; } -static int vivi_release(struct vivi_dev *dev) +static int vivi_release(void) { - if (-1 != dev->vfd->minor) - video_unregister_device(dev->vfd); - else - video_device_release(dev->vfd); + struct vivi_dev *dev; + struct list_head *list; + + while (!list_empty(&vivi_devlist)) { + list = vivi_devlist.next; + list_del(list); + dev = list_entry(list, struct vivi_dev, vivi_devlist); - dev->vfd = NULL; + if (-1 != dev->vfd->minor) + video_unregister_device(dev->vfd); + else + video_device_release(dev->vfd); + + kfree(dev); + } return 0; } @@ -1166,55 +1176,60 @@ static struct video_device vivi_template = { static int __init vivi_init(void) { - int ret; + int ret = -ENOMEM, i; struct vivi_dev *dev; struct video_device *vfd; - dev = kzalloc(sizeof(*dev),GFP_KERNEL); - if (NULL == dev) - return -ENOMEM; - list_add_tail(&dev->vivi_devlist,&vivi_devlist); + for (i = 0; i < n_devs; i++) { + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (NULL == dev) + break; - /* init video dma queues */ - INIT_LIST_HEAD(&dev->vidq.active); - INIT_LIST_HEAD(&dev->vidq.queued); - init_waitqueue_head(&dev->vidq.wq); + list_add_tail(&dev->vivi_devlist, &vivi_devlist); - /* initialize locks */ - mutex_init(&dev->lock); + /* init video dma queues */ + INIT_LIST_HEAD(&dev->vidq.active); + INIT_LIST_HEAD(&dev->vidq.queued); + init_waitqueue_head(&dev->vidq.wq); - dev->vidq.timeout.function = vivi_vid_timeout; - dev->vidq.timeout.data = (unsigned long)dev; - init_timer(&dev->vidq.timeout); + /* initialize locks */ + mutex_init(&dev->lock); - vfd = video_device_alloc(); - if (NULL == vfd) - return -ENOMEM; + dev->vidq.timeout.function = vivi_vid_timeout; + dev->vidq.timeout.data = (unsigned long)dev; + init_timer(&dev->vidq.timeout); - *vfd = vivi_template; + vfd = video_device_alloc(); + if (NULL == vfd) + break; + + *vfd = vivi_template; + + ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr); + if (ret < 0) + break; + + snprintf(vfd->name, sizeof(vfd->name), "%s (%i)", + vivi_template.name, vfd->minor); - ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr); - snprintf(vfd->name, sizeof(vfd->name), "%s (%i)", - vivi_template.name, vfd->minor); + if (video_nr >= 0) + video_nr++; - dev->vfd = vfd; + dev->vfd = vfd; + } - printk(KERN_INFO "Video Technology Magazine Virtual Video Capture Board (Load status: %d)\n", ret); + if (ret < 0) { + vivi_release(); + printk(KERN_INFO "Error %d while loading vivi driver\n", ret); + } else + printk(KERN_INFO "Video Technology Magazine Virtual Video " + "Capture Board successfully loaded.\n"); return ret; } static void __exit vivi_exit(void) { - struct vivi_dev *h; - struct list_head *list; - - while (!list_empty(&vivi_devlist)) { - list = vivi_devlist.next; - list_del(list); - h = list_entry(list, struct vivi_dev, vivi_devlist); - vivi_release(h); - kfree (h); - } + vivi_release(); } module_init(vivi_init); @@ -1225,10 +1240,13 @@ MODULE_AUTHOR("Mauro Carvalho Chehab, Ted Walther and John Sokol"); MODULE_LICENSE("Dual BSD/GPL"); module_param(video_nr, int, 0); +MODULE_PARM_DESC(video_nr, "video iminor start number"); -module_param_named(debug,vivi.debug, int, 0644); -MODULE_PARM_DESC(debug,"activates debug info"); +module_param(n_devs, int, 0); +MODULE_PARM_DESC(n_devs, "number of video devices to create"); -module_param(vid_limit,int,0644); -MODULE_PARM_DESC(vid_limit,"capture memory limit in megabytes"); +module_param_named(debug, vivi.debug, int, 0644); +MODULE_PARM_DESC(debug, "activates debug info"); +module_param(vid_limit, int, 0644); +MODULE_PARM_DESC(vid_limit, "capture memory limit in megabytes"); -- cgit v1.2.3-59-g8ed1b From 025341d4f0caa58f0e5eddbffd11d44e37cff974 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 10 Dec 2007 04:43:38 -0300 Subject: V4L/DVB (6755): Avoid troubles when using multiple devices mv_count is a counter used to move the vertical bars. Before this patch, it where a static var. This works fine for just one device. However, when using multiple devices, every device would increment it. This patch moves it to its correct place: struct vivi_dev. So, now, each device has its own data. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/vivi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index fda01f49efdf..ea9ff8a9bfdf 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -178,6 +178,8 @@ struct vivi_dev { /* Several counters */ int h,m,s,us,jiffies; char timestr[13]; + + int mv_count; /* Controls bars movement */ }; struct vivi_fh { @@ -327,14 +329,12 @@ static void vivi_fillbuff(struct vivi_dev *dev,struct vivi_buffer *buf) struct timeval ts; char *tmpbuf = kmalloc(wmax*2,GFP_KERNEL); void *vbuf=videobuf_to_vmalloc (&buf->vb); - /* FIXME: move to dev struct */ - static int mv_count=0; if (!tmpbuf) return; for (h=0;hmv_count, dev->timestr); /* FIXME: replacing to __copy_to_user */ if (copy_to_user(vbuf+pos,tmpbuf,wmax*2)!=0) @@ -342,7 +342,7 @@ static void vivi_fillbuff(struct vivi_dev *dev,struct vivi_buffer *buf) pos += wmax*2; } - mv_count++; + dev->mv_count++; kfree(tmpbuf); -- cgit v1.2.3-59-g8ed1b From 543323bcf49422c76cf13755ec4a90564065bb60 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 10 Dec 2007 09:33:52 -0300 Subject: V4L/DVB (6758): Miscelaneous cleanups Manually fixed all pertinent checkpatch.pl errors inside the source code. Also removed some unused code at the driver and a few minor cleanups. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/vivi.c | 487 +++++++++++++++++++++++---------------------- 1 file changed, 246 insertions(+), 241 deletions(-) diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index ea9ff8a9bfdf..2bbefd926256 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -44,16 +44,13 @@ #define WAKE_DENOMINATOR 1001 #define BUFFER_TIMEOUT msecs_to_jiffies(500) /* 0.5 seconds */ -/* These timers are for 1 fps - used only for testing */ -//#define WAKE_DENOMINATOR 30 /* hack for testing purposes */ -//#define BUFFER_TIMEOUT msecs_to_jiffies(5000) /* 5 seconds */ - #include "font.h" #define VIVI_MAJOR_VERSION 0 #define VIVI_MINOR_VERSION 4 #define VIVI_RELEASE 0 -#define VIVI_VERSION KERNEL_VERSION(VIVI_MAJOR_VERSION, VIVI_MINOR_VERSION, VIVI_RELEASE) +#define VIVI_VERSION \ + KERNEL_VERSION(VIVI_MAJOR_VERSION, VIVI_MINOR_VERSION, VIVI_RELEASE) /* Declare static vars that will be used as parameters */ static unsigned int vid_limit = 16; /* Video memory limit, in Mb */ @@ -72,7 +69,7 @@ static struct v4l2_queryctrl vivi_qctrl[] = { .default_value = 65535, .flags = 0, .type = V4L2_CTRL_TYPE_INTEGER, - },{ + }, { .id = V4L2_CID_BRIGHTNESS, .type = V4L2_CTRL_TYPE_INTEGER, .name = "Brightness", @@ -113,7 +110,7 @@ static struct v4l2_queryctrl vivi_qctrl[] = { static int qctl_regs[ARRAY_SIZE(vivi_qctrl)]; -#define dprintk(level,fmt, arg...) \ +#define dprintk(level, fmt, arg...) \ do { \ if (vivi.debug >= (level)) \ printk(KERN_DEBUG "vivi: " fmt , ## arg); \ @@ -176,7 +173,7 @@ struct vivi_dev { struct vivi_dmaqueue vidq; /* Several counters */ - int h,m,s,us,jiffies; + int h, m, s, us, jiffies; char timestr[13]; int mv_count; /* Controls bars movement */ @@ -187,7 +184,7 @@ struct vivi_fh { /* video capture */ struct vivi_fmt *fmt; - unsigned int width,height; + unsigned int width, height; struct videobuf_queue vb_vidq; enum v4l2_buf_type type; @@ -206,109 +203,113 @@ enum colors { GREEN, MAGENTA, RED, - BLUE + BLUE, + BLACK, }; static u8 bars[8][3] = { /* R G B */ - {204,204,204}, /* white */ - {208,208, 0}, /* ambar */ - { 0,206,206}, /* cyan */ - { 0,239, 0}, /* green */ - {239, 0,239}, /* magenta */ - {205, 0, 0}, /* red */ - { 0, 0,255}, /* blue */ - { 0, 0, 0} + {204, 204, 204}, /* white */ + {208, 208, 0}, /* ambar */ + { 0, 206, 206}, /* cyan */ + { 0, 239, 0}, /* green */ + {239, 0, 239}, /* magenta */ + {205, 0, 0}, /* red */ + { 0, 0, 255}, /* blue */ + { 0, 0, 0}, /* black */ }; -#define TO_Y(r,g,b) (((16829*r +33039*g +6416*b + 32768)>>16)+16) +#define TO_Y(r, g, b) \ + (((16829 * r + 33039 * g + 6416 * b + 32768) >> 16) + 16) /* RGB to V(Cr) Color transform */ -#define TO_V(r,g,b) (((28784*r -24103*g -4681*b + 32768)>>16)+128) +#define TO_V(r, g, b) \ + (((28784 * r - 24103 * g - 4681 * b + 32768) >> 16) + 128) /* RGB to U(Cb) Color transform */ -#define TO_U(r,g,b) (((-9714*r -19070*g +28784*b + 32768)>>16)+128) +#define TO_U(r, g, b) \ + (((-9714 * r - 19070 * g + 28784 * b + 32768) >> 16) + 128) #define TSTAMP_MIN_Y 24 #define TSTAMP_MAX_Y TSTAMP_MIN_Y+15 #define TSTAMP_MIN_X 64 -static void gen_line(char *basep,int inipos,int wmax, - int hmax, int line, int count, char *timestr) +static void gen_line(char *basep, int inipos, int wmax, + int hmax, int line, int count, char *timestr) { - int w,i,j,pos=inipos,y; - char *p,*s; - u8 chr,r,g,b,color; + int w, i, j, y; + int pos = inipos; + char *p, *s; + u8 chr, r, g, b, color; /* We will just duplicate the second pixel at the packet */ - wmax/=2; + wmax /= 2; /* Generate a standard color bar pattern */ - for (w=0;w=hmax) + if (TSTAMP_MAX_Y >= hmax) goto end; - if (TSTAMP_MIN_X+strlen(timestr)>=wmax) + if (TSTAMP_MIN_X + strlen(timestr) >= wmax) goto end; /* Print stream time */ - if (line>=TSTAMP_MIN_Y && line<=TSTAMP_MAX_Y) { - j=TSTAMP_MIN_X; - for (s=timestr;*s;s++) { - chr=rom8x16_bits[(*s-0x30)*16+line-TSTAMP_MIN_Y]; - for (i=0;i<7;i++) { - if (chr&1<<(7-i)) { /* Font color*/ - r=bars[BLUE][0]; - g=bars[BLUE][1]; - b=bars[BLUE][2]; - r=g=b=0; - g=198; - } else { /* Background color */ - r=bars[WHITE][0]; - g=bars[WHITE][1]; - b=bars[WHITE][2]; - r=g=b=0; + if (line >= TSTAMP_MIN_Y && line <= TSTAMP_MAX_Y) { + j = TSTAMP_MIN_X; + for (s = timestr; *s; s++) { + chr = rom8x16_bits[(*s-0x30)*16+line-TSTAMP_MIN_Y]; + for (i = 0; i < 7; i++) { + if (chr & 1 << (7 - i)) { + /* Font color*/ + r = 0; + g = 198; + b = 0; + } else { + /* Background color */ + r = bars[BLACK][0]; + g = bars[BLACK][1]; + b = bars[BLACK][2]; } - pos=inipos+j*2; - for (color=0;color<4;color++) { - p=basep+pos; + pos = inipos + j * 2; + for (color = 0; color < 4; color++) { + p = basep + pos; - y=TO_Y(r,g,b); + y = TO_Y(r, g, b); switch (color) { - case 0: - case 2: - *p=TO_Y(r,g,b); /* Luminance */ - break; - case 1: - *p=TO_U(r,g,b); /* Cb */ - break; - case 3: - *p=TO_V(r,g,b); /* Cr */ - break; + case 0: + case 2: + *p = TO_Y(r, g, b); /* Luma */ + break; + case 1: + *p = TO_U(r, g, b); /* Cb */ + break; + case 3: + *p = TO_V(r, g, b); /* Cr */ + break; } pos++; } @@ -317,28 +318,27 @@ static void gen_line(char *basep,int inipos,int wmax, } } - end: return; } -static void vivi_fillbuff(struct vivi_dev *dev,struct vivi_buffer *buf) +static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf) { - int h,pos=0; + int h , pos = 0; int hmax = buf->vb.height; int wmax = buf->vb.width; struct timeval ts; - char *tmpbuf = kmalloc(wmax*2,GFP_KERNEL); - void *vbuf=videobuf_to_vmalloc (&buf->vb); + char *tmpbuf = kmalloc(wmax * 2, GFP_KERNEL); + void *vbuf = videobuf_to_vmalloc(&buf->vb); if (!tmpbuf) return; - for (h=0;hmv_count, dev->timestr); /* FIXME: replacing to __copy_to_user */ - if (copy_to_user(vbuf+pos,tmpbuf,wmax*2)!=0) - dprintk(2,"vivifill copy_to_user failed.\n"); + if (copy_to_user(vbuf + pos, tmpbuf, wmax * 2) != 0) + dprintk(2, "vivifill copy_to_user failed.\n"); pos += wmax*2; } @@ -348,27 +348,27 @@ static void vivi_fillbuff(struct vivi_dev *dev,struct vivi_buffer *buf) /* Updates stream time */ - dev->us+=jiffies_to_usecs(jiffies-dev->jiffies); - dev->jiffies=jiffies; - if (dev->us>=1000000) { - dev->us-=1000000; + dev->us += jiffies_to_usecs(jiffies-dev->jiffies); + dev->jiffies = jiffies; + if (dev->us >= 1000000) { + dev->us -= 1000000; dev->s++; - if (dev->s>=60) { - dev->s-=60; + if (dev->s >= 60) { + dev->s -= 60; dev->m++; - if (dev->m>60) { - dev->m-=60; + if (dev->m > 60) { + dev->m -= 60; dev->h++; - if (dev->h>24) - dev->h-=24; + if (dev->h > 24) + dev->h -= 24; } } } - sprintf(dev->timestr,"%02d:%02d:%02d:%03d", - dev->h,dev->m,dev->s,(dev->us+500)/1000); + sprintf(dev->timestr, "%02d:%02d:%02d:%03d", + dev->h, dev->m, dev->s, (dev->us + 500) / 1000); - dprintk(2,"vivifill at %s: Buffer 0x%08lx size= %d\n",dev->timestr, - (unsigned long)tmpbuf,pos); + dprintk(2, "vivifill at %s: Buffer 0x%08lx size= %d\n", dev->timestr, + (unsigned long)tmpbuf, pos); /* Advice that buffer was filled */ buf->vb.state = VIDEOBUF_DONE; @@ -385,14 +385,14 @@ static int restart_video_queue(struct vivi_dmaqueue *dma_q); static void vivi_thread_tick(struct vivi_dmaqueue *dma_q) { struct vivi_buffer *buf; - struct vivi_dev *dev= container_of(dma_q,struct vivi_dev,vidq); + struct vivi_dev *dev = container_of(dma_q, struct vivi_dev, vidq); int bc; /* Announces videobuf that all went ok */ for (bc = 0;; bc++) { if (list_empty(&dma_q->active)) { - dprintk(1,"No active queue to serve\n"); + dprintk(1, "No active queue to serve\n"); break; } @@ -406,19 +406,20 @@ static void vivi_thread_tick(struct vivi_dmaqueue *dma_q) } do_gettimeofday(&buf->vb.ts); - dprintk(2,"[%p/%d] wakeup\n",buf,buf->vb.i); + dprintk(2, "[%p/%d] wakeup\n", buf, buf->vb. i); /* Fill buffer */ - vivi_fillbuff(dev,buf); + vivi_fillbuff(dev, buf); if (list_empty(&dma_q->active)) { del_timer(&dma_q->timeout); } else { - mod_timer(&dma_q->timeout, jiffies+BUFFER_TIMEOUT); + mod_timer(&dma_q->timeout, jiffies + BUFFER_TIMEOUT); } } if (bc != 1) - dprintk(1,"%s: %d buffers handled (should be 1)\n",__FUNCTION__,bc); + dprintk(1, "%s: %d buffers handled (should be 1)\n", + __FUNCTION__, bc); } static void vivi_sleep(struct vivi_dmaqueue *dma_q) @@ -426,30 +427,38 @@ static void vivi_sleep(struct vivi_dmaqueue *dma_q) int timeout; DECLARE_WAITQUEUE(wait, current); - dprintk(1,"%s dma_q=0x%08lx\n",__FUNCTION__,(unsigned long)dma_q); + dprintk(1, "%s dma_q=0x%08lx\n", __FUNCTION__, (unsigned long)dma_q); add_wait_queue(&dma_q->wq, &wait); if (!kthread_should_stop()) { dma_q->frame++; /* Calculate time to wake up */ - timeout=dma_q->ini_jiffies+msecs_to_jiffies((dma_q->frame*WAKE_NUMERATOR*1000)/WAKE_DENOMINATOR)-jiffies; + timeout = dma_q->ini_jiffies+ + msecs_to_jiffies((dma_q->frame*WAKE_NUMERATOR * 1000) + / WAKE_DENOMINATOR) - jiffies; if (timeout <= 0) { - int old=dma_q->frame; - dma_q->frame=(jiffies_to_msecs(jiffies-dma_q->ini_jiffies)*WAKE_DENOMINATOR)/(WAKE_NUMERATOR*1000)+1; - - timeout=dma_q->ini_jiffies+msecs_to_jiffies((dma_q->frame*WAKE_NUMERATOR*1000)/WAKE_DENOMINATOR)-jiffies; - - dprintk(1,"underrun, losed %d frames. " - "Now, frame is %d. Waking on %d jiffies\n", - dma_q->frame-old,dma_q->frame,timeout); + int old = dma_q->frame; + dma_q->frame = (jiffies_to_msecs(jiffies - + dma_q->ini_jiffies) * + WAKE_DENOMINATOR) / + (WAKE_NUMERATOR * 1000) + 1; + + timeout = dma_q->ini_jiffies+ + msecs_to_jiffies((dma_q->frame * + WAKE_NUMERATOR * 1000) + / WAKE_DENOMINATOR) - jiffies; + + dprintk(1, "underrun, losed %d frames. " + "Now, frame is %d. Waking on %d jiffies\n", + dma_q->frame-old, dma_q->frame, timeout); } else - dprintk(1,"will sleep for %i jiffies\n",timeout); + dprintk(1, "will sleep for %i jiffies\n", timeout); vivi_thread_tick(dma_q); - schedule_timeout_interruptible (timeout); + schedule_timeout_interruptible(timeout); } remove_wait_queue(&dma_q->wq, &wait); @@ -458,9 +467,9 @@ static void vivi_sleep(struct vivi_dmaqueue *dma_q) static int vivi_thread(void *data) { - struct vivi_dmaqueue *dma_q=data; + struct vivi_dmaqueue *dma_q = data; - dprintk(1,"thread started\n"); + dprintk(1, "thread started\n"); mod_timer(&dma_q->timeout, jiffies+BUFFER_TIMEOUT); set_freezable(); @@ -477,10 +486,10 @@ static int vivi_thread(void *data) static int vivi_start_thread(struct vivi_dmaqueue *dma_q) { - dma_q->frame=0; - dma_q->ini_jiffies=jiffies; + dma_q->frame = 0; + dma_q->ini_jiffies = jiffies; - dprintk(1,"%s\n",__FUNCTION__); + dprintk(1, "%s\n", __FUNCTION__); dma_q->kthread = kthread_run(vivi_thread, dma_q, "vivi"); @@ -491,17 +500,17 @@ static int vivi_start_thread(struct vivi_dmaqueue *dma_q) /* Wakes thread */ wake_up_interruptible(&dma_q->wq); - dprintk(1,"returning from %s\n",__FUNCTION__); + dprintk(1, "returning from %s\n", __FUNCTION__); return 0; } static void vivi_stop_thread(struct vivi_dmaqueue *dma_q) { - dprintk(1,"%s\n",__FUNCTION__); + dprintk(1, "%s\n", __FUNCTION__); /* shutdown control thread */ if (dma_q->kthread) { kthread_stop(dma_q->kthread); - dma_q->kthread=NULL; + dma_q->kthread = NULL; } } @@ -509,16 +518,16 @@ static int restart_video_queue(struct vivi_dmaqueue *dma_q) { struct vivi_buffer *buf, *prev; - dprintk(1,"%s dma_q=0x%08lx\n",__FUNCTION__,(unsigned long)dma_q); + dprintk(1, "%s dma_q=0x%08lx\n", __FUNCTION__, (unsigned long)dma_q); if (!list_empty(&dma_q->active)) { - buf = list_entry(dma_q->active.next, struct vivi_buffer, vb.queue); - dprintk(2,"restart_queue [%p/%d]: restart dma\n", + buf = list_entry(dma_q->active.next, + struct vivi_buffer, vb.queue); + dprintk(2, "restart_queue [%p/%d]: restart dma\n", buf, buf->vb.i); - dprintk(1,"Restarting video dma\n"); + dprintk(1, "Restarting video dma\n"); vivi_stop_thread(dma_q); -// vivi_start_thread(dma_q); /* cancel all outstanding capture / vbi requests */ list_for_each_entry_safe(buf, prev, &dma_q->active, vb.queue) { @@ -535,28 +544,29 @@ static int restart_video_queue(struct vivi_dmaqueue *dma_q) for (;;) { if (list_empty(&dma_q->queued)) return 0; - buf = list_entry(dma_q->queued.next, struct vivi_buffer, vb.queue); + buf = list_entry(dma_q->queued.next, + struct vivi_buffer, vb.queue); if (NULL == prev) { list_del(&buf->vb.queue); - list_add_tail(&buf->vb.queue,&dma_q->active); + list_add_tail(&buf->vb.queue, &dma_q->active); - dprintk(1,"Restarting video dma\n"); + dprintk(1, "Restarting video dma\n"); vivi_stop_thread(dma_q); vivi_start_thread(dma_q); buf->vb.state = VIDEOBUF_ACTIVE; mod_timer(&dma_q->timeout, jiffies+BUFFER_TIMEOUT); - dprintk(2,"[%p/%d] restart_queue - first active\n", - buf,buf->vb.i); + dprintk(2, "[%p/%d] restart_queue - first active\n", + buf, buf->vb.i); } else if (prev->vb.width == buf->vb.width && prev->vb.height == buf->vb.height && prev->fmt == buf->fmt) { list_del(&buf->vb.queue); - list_add_tail(&buf->vb.queue,&dma_q->active); + list_add_tail(&buf->vb.queue, &dma_q->active); buf->vb.state = VIDEOBUF_ACTIVE; - dprintk(2,"[%p/%d] restart_queue - move to active\n", - buf,buf->vb.i); + dprintk(2, "[%p/%d] restart_queue - move to active\n", + buf, buf->vb.i); } else { return 0; } @@ -566,16 +576,17 @@ static int restart_video_queue(struct vivi_dmaqueue *dma_q) static void vivi_vid_timeout(unsigned long data) { - struct vivi_dev *dev = (struct vivi_dev*)data; + struct vivi_dev *dev = (struct vivi_dev *)data; struct vivi_dmaqueue *vidq = &dev->vidq; struct vivi_buffer *buf; while (!list_empty(&vidq->active)) { - buf = list_entry(vidq->active.next, struct vivi_buffer, vb.queue); + buf = list_entry(vidq->active.next, + struct vivi_buffer, vb.queue); list_del(&buf->vb.queue); buf->vb.state = VIDEOBUF_ERROR; wake_up(&buf->vb.done); - printk("vivi/0: [%p/%d] timeout\n", buf, buf->vb.i); + printk(KERN_INFO "vivi/0: [%p/%d] timeout\n", buf, buf->vb.i); } restart_video_queue(vidq); @@ -597,19 +608,19 @@ buffer_setup(struct videobuf_queue *vq, unsigned int *count, unsigned int *size) while (*size * *count > vid_limit * 1024 * 1024) (*count)--; - dprintk(1,"%s, count=%d, size=%d\n",__FUNCTION__,*count, *size); + dprintk(1, "%s, count=%d, size=%d\n", __FUNCTION__, *count, *size); return 0; } static void free_buffer(struct videobuf_queue *vq, struct vivi_buffer *buf) { - dprintk(1,"%s\n",__FUNCTION__); + dprintk(1, "%s\n", __FUNCTION__); if (in_interrupt()) BUG(); - videobuf_waiton(&buf->vb,0,0); + videobuf_waiton(&buf->vb, 0, 0); videobuf_vmalloc_free(&buf->vb); buf->vb.state = VIDEOBUF_NEEDS_INIT; } @@ -621,10 +632,10 @@ buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, enum v4l2_field field) { struct vivi_fh *fh = vq->priv_data; - struct vivi_buffer *buf = container_of(vb,struct vivi_buffer,vb); + struct vivi_buffer *buf = container_of(vb, struct vivi_buffer, vb); int rc, init_buffer = 0; - dprintk(1,"%s, field=%d\n",__FUNCTION__,field); + dprintk(1, "%s, field=%d\n", __FUNCTION__, field); BUG_ON(NULL == fh->fmt); if (fh->width < 48 || fh->width > norm_maxw() || @@ -646,7 +657,8 @@ buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, } if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { - if (0 != (rc = videobuf_iolock(vq,&buf->vb,NULL))) + rc = videobuf_iolock(vq, &buf->vb, NULL); + if (rc < 0) goto fail; } @@ -655,65 +667,68 @@ buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, return 0; fail: - free_buffer(vq,buf); + free_buffer(vq, buf); return rc; } static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) { - struct vivi_buffer *buf = container_of(vb,struct vivi_buffer,vb); - struct vivi_fh *fh = vq->priv_data; - struct vivi_dev *dev = fh->dev; - struct vivi_dmaqueue *vidq = &dev->vidq; + struct vivi_buffer *buf = container_of(vb, struct vivi_buffer, vb); + struct vivi_fh *fh = vq->priv_data; + struct vivi_dev *dev = fh->dev; + struct vivi_dmaqueue *vidq = &dev->vidq; struct vivi_buffer *prev; if (!list_empty(&vidq->queued)) { - dprintk(1,"adding vb queue=0x%08lx\n",(unsigned long)&buf->vb.queue); - list_add_tail(&buf->vb.queue,&vidq->queued); + dprintk(1, "adding vb queue=0x%08lx\n", + (unsigned long)&buf->vb.queue); + list_add_tail(&buf->vb.queue, &vidq->queued); buf->vb.state = VIDEOBUF_QUEUED; - dprintk(2,"[%p/%d] buffer_queue - append to queued\n", + dprintk(2, "[%p/%d] buffer_queue - append to queued\n", buf, buf->vb.i); } else if (list_empty(&vidq->active)) { - list_add_tail(&buf->vb.queue,&vidq->active); + list_add_tail(&buf->vb.queue, &vidq->active); buf->vb.state = VIDEOBUF_ACTIVE; mod_timer(&vidq->timeout, jiffies+BUFFER_TIMEOUT); - dprintk(2,"[%p/%d] buffer_queue - first active\n", + dprintk(2, "[%p/%d] buffer_queue - first active\n", buf, buf->vb.i); vivi_start_thread(vidq); } else { - prev = list_entry(vidq->active.prev, struct vivi_buffer, vb.queue); + prev = list_entry(vidq->active.prev, + struct vivi_buffer, vb.queue); if (prev->vb.width == buf->vb.width && prev->vb.height == buf->vb.height && prev->fmt == buf->fmt) { - list_add_tail(&buf->vb.queue,&vidq->active); + list_add_tail(&buf->vb.queue, &vidq->active); buf->vb.state = VIDEOBUF_ACTIVE; - dprintk(2,"[%p/%d] buffer_queue - append to active\n", + dprintk(2, "[%p/%d] buffer_queue - append to active\n", buf, buf->vb.i); } else { - list_add_tail(&buf->vb.queue,&vidq->queued); + list_add_tail(&buf->vb.queue, &vidq->queued); buf->vb.state = VIDEOBUF_QUEUED; - dprintk(2,"[%p/%d] buffer_queue - first queued\n", + dprintk(2, "[%p/%d] buffer_queue - first queued\n", buf, buf->vb.i); } } } -static void buffer_release(struct videobuf_queue *vq, struct videobuf_buffer *vb) +static void buffer_release(struct videobuf_queue *vq, + struct videobuf_buffer *vb) { - struct vivi_buffer *buf = container_of(vb,struct vivi_buffer,vb); + struct vivi_buffer *buf = container_of(vb, struct vivi_buffer, vb); struct vivi_fh *fh = vq->priv_data; - struct vivi_dev *dev = (struct vivi_dev*)fh->dev; + struct vivi_dev *dev = (struct vivi_dev *)fh->dev; struct vivi_dmaqueue *vidq = &dev->vidq; - dprintk(1,"%s\n",__FUNCTION__); + dprintk(1, "%s\n", __FUNCTION__); vivi_stop_thread(vidq); - free_buffer(vq,buf); + free_buffer(vq, buf); } static struct videobuf_queue_ops vivi_video_qops = { @@ -726,7 +741,7 @@ static struct videobuf_queue_ops vivi_video_qops = { /* ------------------------------------------------------------------ IOCTL vidioc handling ------------------------------------------------------------------*/ -static int vidioc_querycap (struct file *file, void *priv, +static int vidioc_querycap(struct file *file, void *priv, struct v4l2_capability *cap) { strcpy(cap->driver, "vivi"); @@ -738,21 +753,21 @@ static int vidioc_querycap (struct file *file, void *priv, return 0; } -static int vidioc_enum_fmt_cap (struct file *file, void *priv, +static int vidioc_enum_fmt_cap(struct file *file, void *priv, struct v4l2_fmtdesc *f) { if (f->index > 0) return -EINVAL; - strlcpy(f->description,format.name,sizeof(f->description)); + strlcpy(f->description, format.name, sizeof(f->description)); f->pixelformat = format.fourcc; return 0; } -static int vidioc_g_fmt_cap (struct file *file, void *priv, +static int vidioc_g_fmt_cap(struct file *file, void *priv, struct v4l2_format *f) { - struct vivi_fh *fh=priv; + struct vivi_fh *fh = priv; f->fmt.pix.width = fh->width; f->fmt.pix.height = fh->height; @@ -766,7 +781,7 @@ static int vidioc_g_fmt_cap (struct file *file, void *priv, return (0); } -static int vidioc_try_fmt_cap (struct file *file, void *priv, +static int vidioc_try_fmt_cap(struct file *file, void *priv, struct v4l2_format *f) { struct vivi_fmt *fmt; @@ -774,18 +789,18 @@ static int vidioc_try_fmt_cap (struct file *file, void *priv, unsigned int maxw, maxh; if (format.fourcc != f->fmt.pix.pixelformat) { - dprintk(1,"Fourcc format (0x%08x) invalid. Driver accepts " - "only 0x%08x\n",f->fmt.pix.pixelformat,format.fourcc); + dprintk(1, "Fourcc format (0x%08x) invalid. Driver accepts " + "only 0x%08x\n", f->fmt.pix.pixelformat, format.fourcc); return -EINVAL; } - fmt=&format; + fmt = &format; field = f->fmt.pix.field; if (field == V4L2_FIELD_ANY) { - field=V4L2_FIELD_INTERLACED; + field = V4L2_FIELD_INTERLACED; } else if (V4L2_FIELD_INTERLACED != field) { - dprintk(1,"Field type invalid.\n"); + dprintk(1, "Field type invalid.\n"); return -EINVAL; } @@ -811,11 +826,11 @@ static int vidioc_try_fmt_cap (struct file *file, void *priv, } /*FIXME: This seems to be generic enough to be at videodev2 */ -static int vidioc_s_fmt_cap (struct file *file, void *priv, +static int vidioc_s_fmt_cap(struct file *file, void *priv, struct v4l2_format *f) { - struct vivi_fh *fh=priv; - int ret = vidioc_try_fmt_cap(file,fh,f); + struct vivi_fh *fh = priv; + int ret = vidioc_try_fmt_cap(file, fh, f); if (ret < 0) return (ret); @@ -828,47 +843,48 @@ static int vidioc_s_fmt_cap (struct file *file, void *priv, return (0); } -static int vidioc_reqbufs (struct file *file, void *priv, struct v4l2_requestbuffers *p) +static int vidioc_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *p) { - struct vivi_fh *fh=priv; + struct vivi_fh *fh = priv; return (videobuf_reqbufs(&fh->vb_vidq, p)); } -static int vidioc_querybuf (struct file *file, void *priv, struct v4l2_buffer *p) +static int vidioc_querybuf(struct file *file, void *priv, struct v4l2_buffer *p) { - struct vivi_fh *fh=priv; + struct vivi_fh *fh = priv; return (videobuf_querybuf(&fh->vb_vidq, p)); } -static int vidioc_qbuf (struct file *file, void *priv, struct v4l2_buffer *p) +static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *p) { - struct vivi_fh *fh=priv; + struct vivi_fh *fh = priv; return (videobuf_qbuf(&fh->vb_vidq, p)); } -static int vidioc_dqbuf (struct file *file, void *priv, struct v4l2_buffer *p) +static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p) { - struct vivi_fh *fh=priv; + struct vivi_fh *fh = priv; return (videobuf_dqbuf(&fh->vb_vidq, p, file->f_flags & O_NONBLOCK)); } #ifdef CONFIG_VIDEO_V4L1_COMPAT -static int vidiocgmbuf (struct file *file, void *priv, struct video_mbuf *mbuf) +static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf) { - struct vivi_fh *fh=priv; + struct vivi_fh *fh = priv; - return videobuf_cgmbuf (&fh->vb_vidq, mbuf, 8); + return videobuf_cgmbuf(&fh->vb_vidq, mbuf, 8); } #endif static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) { - struct vivi_fh *fh=priv; + struct vivi_fh *fh = priv; if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; @@ -880,7 +896,7 @@ static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) { - struct vivi_fh *fh=priv; + struct vivi_fh *fh = priv; if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; @@ -890,13 +906,13 @@ static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) return videobuf_streamoff(&fh->vb_vidq); } -static int vidioc_s_std (struct file *file, void *priv, v4l2_std_id *i) +static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *i) { return 0; } /* only one input in this sample driver */ -static int vidioc_enum_input (struct file *file, void *priv, +static int vidioc_enum_input(struct file *file, void *priv, struct v4l2_input *inp) { if (inp->index != 0) @@ -904,18 +920,18 @@ static int vidioc_enum_input (struct file *file, void *priv, inp->type = V4L2_INPUT_TYPE_CAMERA; inp->std = V4L2_STD_NTSC_M; - strcpy(inp->name,"Camera"); + strcpy(inp->name, "Camera"); return (0); } -static int vidioc_g_input (struct file *file, void *priv, unsigned int *i) +static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) { *i = 0; return (0); } -static int vidioc_s_input (struct file *file, void *priv, unsigned int i) +static int vidioc_s_input(struct file *file, void *priv, unsigned int i) { if (i > 0) return -EINVAL; @@ -924,8 +940,8 @@ static int vidioc_s_input (struct file *file, void *priv, unsigned int i) } /* --- controls ---------------------------------------------- */ -static int vidioc_queryctrl (struct file *file, void *priv, - struct v4l2_queryctrl *qc) +static int vidioc_queryctrl(struct file *file, void *priv, + struct v4l2_queryctrl *qc) { int i; @@ -939,33 +955,31 @@ static int vidioc_queryctrl (struct file *file, void *priv, return -EINVAL; } -static int vidioc_g_ctrl (struct file *file, void *priv, - struct v4l2_control *ctrl) +static int vidioc_g_ctrl(struct file *file, void *priv, + struct v4l2_control *ctrl) { int i; for (i = 0; i < ARRAY_SIZE(vivi_qctrl); i++) if (ctrl->id == vivi_qctrl[i].id) { - ctrl->value=qctl_regs[i]; + ctrl->value = qctl_regs[i]; return (0); } return -EINVAL; } -static int vidioc_s_ctrl (struct file *file, void *priv, +static int vidioc_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl) { int i; for (i = 0; i < ARRAY_SIZE(vivi_qctrl); i++) if (ctrl->id == vivi_qctrl[i].id) { - if (ctrl->value < - vivi_qctrl[i].minimum - || ctrl->value > - vivi_qctrl[i].maximum) { + if (ctrl->value < vivi_qctrl[i].minimum + || ctrl->value > vivi_qctrl[i].maximum) { return (-ERANGE); } - qctl_regs[i]=ctrl->value; + qctl_regs[i] = ctrl->value; return (0); } return -EINVAL; @@ -984,16 +998,14 @@ static int vivi_open(struct inode *inode, struct file *file) struct vivi_fh *fh; int i; - printk(KERN_DEBUG "vivi: open called (minor=%d)\n",minor); + printk(KERN_DEBUG "vivi: open called (minor=%d)\n", minor); list_for_each_entry(dev, &vivi_devlist, vivi_devlist) if (dev->vfd->minor == minor) goto found; return -ENODEV; -found: - - +found: /* If more than one user, mutex should be added */ dev->users++; @@ -1001,7 +1013,7 @@ found: v4l2_type_names[V4L2_BUF_TYPE_VIDEO_CAPTURE], dev->users); /* allocate + initialize per filehandle data */ - fh = kzalloc(sizeof(*fh),GFP_KERNEL); + fh = kzalloc(sizeof(*fh), GFP_KERNEL); if (NULL == fh) { dev->users--; return -ENOMEM; @@ -1017,27 +1029,21 @@ found: /* Put all controls at a sane state */ for (i = 0; i < ARRAY_SIZE(vivi_qctrl); i++) - qctl_regs[i] =vivi_qctrl[i].default_value; - - dprintk(1,"Open: fh=0x%08lx, dev=0x%08lx, dev->vidq=0x%08lx\n", - (unsigned long)fh,(unsigned long)dev,(unsigned long)&dev->vidq); - dprintk(1,"Open: list_empty queued=%d\n",list_empty(&dev->vidq.queued)); - dprintk(1,"Open: list_empty active=%d\n",list_empty(&dev->vidq.active)); + qctl_regs[i] = vivi_qctrl[i].default_value; /* Resets frame counters */ - dev->h=0; - dev->m=0; - dev->s=0; - dev->us=0; - dev->jiffies=jiffies; - sprintf(dev->timestr,"%02d:%02d:%02d:%03d", - dev->h,dev->m,dev->s,(dev->us+500)/1000); + dev->h = 0; + dev->m = 0; + dev->s = 0; + dev->us = 0; + dev->mv_count = 0; + dev->jiffies = jiffies; + sprintf(dev->timestr, "%02d:%02d:%02d:%03d", + dev->h, dev->m, dev->s, (dev->us + 500) / 1000); videobuf_queue_vmalloc_init(&fh->vb_vidq, &vivi_video_qops, - NULL, NULL, - fh->type, - V4L2_FIELD_INTERLACED, - sizeof(struct vivi_buffer),fh); + NULL, NULL, fh->type, V4L2_FIELD_INTERLACED, + sizeof(struct vivi_buffer), fh); return 0; } @@ -1045,9 +1051,9 @@ found: static ssize_t vivi_read(struct file *file, char __user *data, size_t count, loff_t *ppos) { - struct vivi_fh *fh = file->private_data; + struct vivi_fh *fh = file->private_data; - if (fh->type==V4L2_BUF_TYPE_VIDEO_CAPTURE) { + if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { return videobuf_read_stream(&fh->vb_vidq, data, count, ppos, 0, file->f_flags & O_NONBLOCK); } @@ -1060,7 +1066,7 @@ vivi_poll(struct file *file, struct poll_table_struct *wait) struct vivi_fh *fh = file->private_data; struct videobuf_queue *q = &fh->vb_vidq; - dprintk(1,"%s\n",__FUNCTION__); + dprintk(1, "%s\n", __FUNCTION__); if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type) return POLLERR; @@ -1084,7 +1090,7 @@ static int vivi_close(struct inode *inode, struct file *file) dev->users--; - printk(KERN_DEBUG "vivi: close called (minor=%d, users=%d)\n",minor,dev->users); + dprintk(1, "close called (minor=%d, users=%d)\n", minor, dev->users); return 0; } @@ -1110,17 +1116,16 @@ static int vivi_release(void) return 0; } -static int -vivi_mmap(struct file *file, struct vm_area_struct * vma) +static int vivi_mmap(struct file *file, struct vm_area_struct *vma) { - struct vivi_fh *fh = file->private_data; + struct vivi_fh *fh = file->private_data; int ret; - dprintk (1,"mmap called, vma=0x%08lx\n",(unsigned long)vma); + dprintk(1, "mmap called, vma=0x%08lx\n", (unsigned long)vma); - ret=videobuf_mmap_mapper(&fh->vb_vidq, vma); + ret = videobuf_mmap_mapper(&fh->vb_vidq, vma); - dprintk (1,"vma start=0x%08lx, size=%ld, ret=%d\n", + dprintk(1, "vma start=0x%08lx, size=%ld, ret=%d\n", (unsigned long)vma->vm_start, (unsigned long)vma->vm_end-(unsigned long)vma->vm_start, ret); -- cgit v1.2.3-59-g8ed1b From e2c77314c9444c994087c96eb370b333d57657a7 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 10 Dec 2007 10:53:20 -0300 Subject: V4L/DVB (6759): CodingStyle fixes Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/videobuf-core.c | 292 ++++++++++++++++++------------------ 1 file changed, 146 insertions(+), 146 deletions(-) diff --git a/drivers/media/video/videobuf-core.c b/drivers/media/video/videobuf-core.c index 26d1a5001738..9662d1e40a0c 100644 --- a/drivers/media/video/videobuf-core.c +++ b/drivers/media/video/videobuf-core.c @@ -22,29 +22,32 @@ #include #define MAGIC_BUFFER 0x20070728 -#define MAGIC_CHECK(is,should) if (unlikely((is) != (should))) \ - { printk(KERN_ERR "magic mismatch: %x (expected %x)\n",is,should); BUG(); } +#define MAGIC_CHECK(is, should) do { \ + if (unlikely((is) != (should))) { \ + printk(KERN_ERR "magic mismatch: %x (expected %x)\n", is, should); \ + BUG(); } } while (0) -static int debug = 0; +static int debug; module_param(debug, int, 0644); MODULE_DESCRIPTION("helper module to manage video4linux buffers"); MODULE_AUTHOR("Mauro Carvalho Chehab "); MODULE_LICENSE("GPL"); -#define dprintk(level, fmt, arg...) if (debug >= level) \ - printk(KERN_DEBUG "vbuf: " fmt , ## arg) +#define dprintk(level, fmt, arg...) do { \ + if (debug >= level) \ + printk(KERN_DEBUG "vbuf: " fmt , ## arg); } while (0) /* --------------------------------------------------------------------- */ #define CALL(q, f, arg...) \ - ( (q->int_ops->f)? q->int_ops->f(arg) : 0) + ((q->int_ops->f) ? q->int_ops->f(arg) : 0) -void* videobuf_alloc(struct videobuf_queue* q) +void *videobuf_alloc(struct videobuf_queue *q) { struct videobuf_buffer *vb; - BUG_ON (q->msizemsize < sizeof(*vb)); if (!q->int_ops || !q->int_ops->alloc) { printk(KERN_ERR "No specific ops defined!\n"); @@ -66,7 +69,7 @@ int videobuf_waiton(struct videobuf_buffer *vb, int non_blocking, int intr) int retval = 0; DECLARE_WAITQUEUE(wait, current); - MAGIC_CHECK(vb->magic,MAGIC_BUFFER); + MAGIC_CHECK(vb->magic, MAGIC_BUFFER); add_wait_queue(&vb->done, &wait); while (vb->state == VIDEOBUF_ACTIVE || vb->state == VIDEOBUF_QUEUED) { if (non_blocking) { @@ -75,11 +78,12 @@ int videobuf_waiton(struct videobuf_buffer *vb, int non_blocking, int intr) } set_current_state(intr ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE); - if (vb->state == VIDEOBUF_ACTIVE || vb->state == VIDEOBUF_QUEUED) + if (vb->state == VIDEOBUF_ACTIVE || + vb->state == VIDEOBUF_QUEUED) schedule(); set_current_state(TASK_RUNNING); if (intr && signal_pending(current)) { - dprintk(1,"buffer waiton: -EINTR\n"); + dprintk(1, "buffer waiton: -EINTR\n"); retval = -EINTR; break; } @@ -88,27 +92,27 @@ int videobuf_waiton(struct videobuf_buffer *vb, int non_blocking, int intr) return retval; } -int videobuf_iolock(struct videobuf_queue* q, struct videobuf_buffer *vb, +int videobuf_iolock(struct videobuf_queue *q, struct videobuf_buffer *vb, struct v4l2_framebuffer *fbuf) { - MAGIC_CHECK(vb->magic,MAGIC_BUFFER); - MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS); + MAGIC_CHECK(vb->magic, MAGIC_BUFFER); + MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS); - /* FIXME: This is required to avoid OOPS on some cases, since mmap_mapper() - method should be called before _iolock. + /* FIXME: This is required to avoid OOPS on some cases, + since mmap_mapper() method should be called before _iolock. On some cases, the mmap_mapper() is called only after scheduling. However, this way is just too dirty! Better to wait for some event. */ schedule_timeout(HZ); - return CALL(q,iolock,q,vb,fbuf); + return CALL(q, iolock, q, vb, fbuf); } /* --------------------------------------------------------------------- */ -void videobuf_queue_core_init(struct videobuf_queue* q, +void videobuf_queue_core_init(struct videobuf_queue *q, struct videobuf_queue_ops *ops, void *dev, spinlock_t *irqlock, @@ -118,7 +122,7 @@ void videobuf_queue_core_init(struct videobuf_queue* q, void *priv, struct videobuf_qtype_ops *int_ops) { - memset(q,0,sizeof(*q)); + memset(q, 0, sizeof(*q)); q->irqlock = irqlock; q->dev = dev; q->type = type; @@ -129,13 +133,13 @@ void videobuf_queue_core_init(struct videobuf_queue* q, q->int_ops = int_ops; /* All buffer operations are mandatory */ - BUG_ON (!q->ops->buf_setup); - BUG_ON (!q->ops->buf_prepare); - BUG_ON (!q->ops->buf_queue); - BUG_ON (!q->ops->buf_release); + BUG_ON(!q->ops->buf_setup); + BUG_ON(!q->ops->buf_prepare); + BUG_ON(!q->ops->buf_queue); + BUG_ON(!q->ops->buf_release); /* Having implementations for abstract methods are mandatory */ - BUG_ON (!q->int_ops); + BUG_ON(!q->int_ops); mutex_init(&q->lock); INIT_LIST_HEAD(&q->stream); @@ -146,33 +150,33 @@ int videobuf_queue_is_busy(struct videobuf_queue *q) { int i; - MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS); + MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS); if (q->streaming) { - dprintk(1,"busy: streaming active\n"); + dprintk(1, "busy: streaming active\n"); return 1; } if (q->reading) { - dprintk(1,"busy: pending read #1\n"); + dprintk(1, "busy: pending read #1\n"); return 1; } if (q->read_buf) { - dprintk(1,"busy: pending read #2\n"); + dprintk(1, "busy: pending read #2\n"); return 1; } for (i = 0; i < VIDEO_MAX_FRAME; i++) { if (NULL == q->bufs[i]) continue; if (q->bufs[i]->map) { - dprintk(1,"busy: buffer #%d mapped\n",i); + dprintk(1, "busy: buffer #%d mapped\n", i); return 1; } if (q->bufs[i]->state == VIDEOBUF_QUEUED) { - dprintk(1,"busy: buffer #%d queued\n",i); + dprintk(1, "busy: buffer #%d queued\n", i); return 1; } if (q->bufs[i]->state == VIDEOBUF_ACTIVE) { - dprintk(1,"busy: buffer #%d avtive\n",i); + dprintk(1, "busy: buffer #%d avtive\n", i); return 1; } } @@ -182,12 +186,12 @@ int videobuf_queue_is_busy(struct videobuf_queue *q) /* Locking: Caller holds q->lock */ void videobuf_queue_cancel(struct videobuf_queue *q) { - unsigned long flags=0; + unsigned long flags = 0; int i; /* remove queued buffers from list */ if (q->irqlock) - spin_lock_irqsave(q->irqlock,flags); + spin_lock_irqsave(q->irqlock, flags); for (i = 0; i < VIDEO_MAX_FRAME; i++) { if (NULL == q->bufs[i]) continue; @@ -197,13 +201,13 @@ void videobuf_queue_cancel(struct videobuf_queue *q) } } if (q->irqlock) - spin_unlock_irqrestore(q->irqlock,flags); + spin_unlock_irqrestore(q->irqlock, flags); /* free all buffers + clear queue */ for (i = 0; i < VIDEO_MAX_FRAME; i++) { if (NULL == q->bufs[i]) continue; - q->ops->buf_release(q,q->bufs[i]); + q->ops->buf_release(q, q->bufs[i]); } INIT_LIST_HEAD(&q->stream); } @@ -233,8 +237,8 @@ enum v4l2_field videobuf_next_field(struct videobuf_queue *q) static void videobuf_status(struct videobuf_queue *q, struct v4l2_buffer *b, struct videobuf_buffer *vb, enum v4l2_buf_type type) { - MAGIC_CHECK(vb->magic,MAGIC_BUFFER); - MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS); + MAGIC_CHECK(vb->magic, MAGIC_BUFFER); + MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS); b->index = vb->i; b->type = type; @@ -294,16 +298,16 @@ static int __videobuf_mmap_free(struct videobuf_queue *q) if (!q) return 0; - MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS); + MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS); - rc = CALL(q,mmap_free,q); - if (rc<0) + rc = CALL(q, mmap_free, q); + if (rc < 0) return rc; for (i = 0; i < VIDEO_MAX_FRAME; i++) { if (NULL == q->bufs[i]) continue; - q->ops->buf_release(q,q->bufs[i]); + q->ops->buf_release(q, q->bufs[i]); kfree(q->bufs[i]); q->bufs[i] = NULL; } @@ -328,7 +332,7 @@ static int __videobuf_mmap_setup(struct videobuf_queue *q, unsigned int i; int err; - MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS); + MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS); err = __videobuf_mmap_free(q); if (0 != err) @@ -359,7 +363,7 @@ static int __videobuf_mmap_setup(struct videobuf_queue *q, if (!i) return -ENOMEM; - dprintk(1,"mmap setup: %d buffers, %d bytes each\n", + dprintk(1, "mmap setup: %d buffers, %d bytes each\n", i, bsize); return i; @@ -379,35 +383,35 @@ int videobuf_mmap_setup(struct videobuf_queue *q, int videobuf_reqbufs(struct videobuf_queue *q, struct v4l2_requestbuffers *req) { - unsigned int size,count; + unsigned int size, count; int retval; if (req->count < 1) { - dprintk(1,"reqbufs: count invalid (%d)\n",req->count); + dprintk(1, "reqbufs: count invalid (%d)\n", req->count); return -EINVAL; } if (req->memory != V4L2_MEMORY_MMAP && req->memory != V4L2_MEMORY_USERPTR && req->memory != V4L2_MEMORY_OVERLAY) { - dprintk(1,"reqbufs: memory type invalid\n"); + dprintk(1, "reqbufs: memory type invalid\n"); return -EINVAL; } mutex_lock(&q->lock); if (req->type != q->type) { - dprintk(1,"reqbufs: queue type invalid\n"); + dprintk(1, "reqbufs: queue type invalid\n"); retval = -EINVAL; goto done; } if (q->streaming) { - dprintk(1,"reqbufs: streaming already exists\n"); + dprintk(1, "reqbufs: streaming already exists\n"); retval = -EBUSY; goto done; } if (!list_empty(&q->stream)) { - dprintk(1,"reqbufs: stream running\n"); + dprintk(1, "reqbufs: stream running\n"); retval = -EBUSY; goto done; } @@ -416,14 +420,14 @@ int videobuf_reqbufs(struct videobuf_queue *q, if (count > VIDEO_MAX_FRAME) count = VIDEO_MAX_FRAME; size = 0; - q->ops->buf_setup(q,&count,&size); + q->ops->buf_setup(q, &count, &size); size = PAGE_ALIGN(size); - dprintk(1,"reqbufs: bufs=%d, size=0x%x [%d pages total]\n", + dprintk(1, "reqbufs: bufs=%d, size=0x%x [%d pages total]\n", count, size, (count*size)>>PAGE_SHIFT); - retval = __videobuf_mmap_setup(q,count,size,req->memory); + retval = __videobuf_mmap_setup(q, count, size, req->memory); if (retval < 0) { - dprintk(1,"reqbufs: mmap setup returned %d\n",retval); + dprintk(1, "reqbufs: mmap setup returned %d\n", retval); goto done; } @@ -440,19 +444,19 @@ int videobuf_querybuf(struct videobuf_queue *q, struct v4l2_buffer *b) mutex_lock(&q->lock); if (unlikely(b->type != q->type)) { - dprintk(1,"querybuf: Wrong type.\n"); + dprintk(1, "querybuf: Wrong type.\n"); goto done; } if (unlikely(b->index < 0 || b->index >= VIDEO_MAX_FRAME)) { - dprintk(1,"querybuf: index out of range.\n"); + dprintk(1, "querybuf: index out of range.\n"); goto done; } if (unlikely(NULL == q->bufs[b->index])) { - dprintk(1,"querybuf: buffer is null.\n"); + dprintk(1, "querybuf: buffer is null.\n"); goto done; } - videobuf_status(q,b,q->bufs[b->index],q->type); + videobuf_status(q, b, q->bufs[b->index], q->type); ret = 0; done: @@ -465,10 +469,10 @@ int videobuf_qbuf(struct videobuf_queue *q, { struct videobuf_buffer *buf; enum v4l2_field field; - unsigned long flags=0; + unsigned long flags = 0; int retval; - MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS); + MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS); if (b->memory == V4L2_MEMORY_MMAP) down_read(¤t->mm->mmap_sem); @@ -476,36 +480,36 @@ int videobuf_qbuf(struct videobuf_queue *q, mutex_lock(&q->lock); retval = -EBUSY; if (q->reading) { - dprintk(1,"qbuf: Reading running...\n"); + dprintk(1, "qbuf: Reading running...\n"); goto done; } retval = -EINVAL; if (b->type != q->type) { - dprintk(1,"qbuf: Wrong type.\n"); + dprintk(1, "qbuf: Wrong type.\n"); goto done; } if (b->index < 0 || b->index >= VIDEO_MAX_FRAME) { - dprintk(1,"qbuf: index out of range.\n"); + dprintk(1, "qbuf: index out of range.\n"); goto done; } buf = q->bufs[b->index]; if (NULL == buf) { - dprintk(1,"qbuf: buffer is null.\n"); + dprintk(1, "qbuf: buffer is null.\n"); goto done; } - MAGIC_CHECK(buf->magic,MAGIC_BUFFER); + MAGIC_CHECK(buf->magic, MAGIC_BUFFER); if (buf->memory != b->memory) { - dprintk(1,"qbuf: memory type is wrong.\n"); + dprintk(1, "qbuf: memory type is wrong.\n"); goto done; } if (buf->state != VIDEOBUF_NEEDS_INIT && buf->state != VIDEOBUF_IDLE) { - dprintk(1,"qbuf: buffer is already queued or active.\n"); + dprintk(1, "qbuf: buffer is already queued or active.\n"); goto done; } if (b->flags & V4L2_BUF_FLAG_INPUT) { if (b->input >= q->inputs) { - dprintk(1,"qbuf: wrong input.\n"); + dprintk(1, "qbuf: wrong input.\n"); goto done; } buf->input = b->input; @@ -516,44 +520,46 @@ int videobuf_qbuf(struct videobuf_queue *q, switch (b->memory) { case V4L2_MEMORY_MMAP: if (0 == buf->baddr) { - dprintk(1,"qbuf: mmap requested but buffer addr is zero!\n"); + dprintk(1, "qbuf: mmap requested " + "but buffer addr is zero!\n"); goto done; } break; case V4L2_MEMORY_USERPTR: if (b->length < buf->bsize) { - dprintk(1,"qbuf: buffer length is not enough\n"); + dprintk(1, "qbuf: buffer length is not enough\n"); goto done; } - if (VIDEOBUF_NEEDS_INIT != buf->state && buf->baddr != b->m.userptr) - q->ops->buf_release(q,buf); + if (VIDEOBUF_NEEDS_INIT != buf->state && + buf->baddr != b->m.userptr) + q->ops->buf_release(q, buf); buf->baddr = b->m.userptr; break; case V4L2_MEMORY_OVERLAY: buf->boff = b->m.offset; break; default: - dprintk(1,"qbuf: wrong memory type\n"); + dprintk(1, "qbuf: wrong memory type\n"); goto done; } - dprintk(1,"qbuf: requesting next field\n"); + dprintk(1, "qbuf: requesting next field\n"); field = videobuf_next_field(q); - retval = q->ops->buf_prepare(q,buf,field); + retval = q->ops->buf_prepare(q, buf, field); if (0 != retval) { - dprintk(1,"qbuf: buffer_prepare returned %d\n",retval); + dprintk(1, "qbuf: buffer_prepare returned %d\n", retval); goto done; } - list_add_tail(&buf->stream,&q->stream); + list_add_tail(&buf->stream, &q->stream); if (q->streaming) { if (q->irqlock) - spin_lock_irqsave(q->irqlock,flags); - q->ops->buf_queue(q,buf); + spin_lock_irqsave(q->irqlock, flags); + q->ops->buf_queue(q, buf); if (q->irqlock) - spin_unlock_irqrestore(q->irqlock,flags); + spin_unlock_irqrestore(q->irqlock, flags); } - dprintk(1,"qbuf: succeded\n"); + dprintk(1, "qbuf: succeded\n"); retval = 0; done: @@ -571,49 +577,49 @@ int videobuf_dqbuf(struct videobuf_queue *q, struct videobuf_buffer *buf; int retval; - MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS); + MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS); mutex_lock(&q->lock); retval = -EBUSY; if (q->reading) { - dprintk(1,"dqbuf: Reading running...\n"); + dprintk(1, "dqbuf: Reading running...\n"); goto done; } retval = -EINVAL; if (b->type != q->type) { - dprintk(1,"dqbuf: Wrong type.\n"); + dprintk(1, "dqbuf: Wrong type.\n"); goto done; } if (list_empty(&q->stream)) { - dprintk(1,"dqbuf: stream running\n"); + dprintk(1, "dqbuf: stream running\n"); goto done; } buf = list_entry(q->stream.next, struct videobuf_buffer, stream); retval = videobuf_waiton(buf, nonblocking, 1); if (retval < 0) { - dprintk(1,"dqbuf: waiton returned %d\n",retval); + dprintk(1, "dqbuf: waiton returned %d\n", retval); goto done; } switch (buf->state) { case VIDEOBUF_ERROR: - dprintk(1,"dqbuf: state is error\n"); + dprintk(1, "dqbuf: state is error\n"); retval = -EIO; - CALL(q,sync,q, buf); + CALL(q, sync, q, buf); buf->state = VIDEOBUF_IDLE; break; case VIDEOBUF_DONE: - dprintk(1,"dqbuf: state is done\n"); - CALL(q,sync,q, buf); + dprintk(1, "dqbuf: state is done\n"); + CALL(q, sync, q, buf); buf->state = VIDEOBUF_IDLE; break; default: - dprintk(1,"dqbuf: state invalid\n"); + dprintk(1, "dqbuf: state invalid\n"); retval = -EINVAL; goto done; } list_del(&buf->stream); - memset(b,0,sizeof(*b)); - videobuf_status(q,b,buf,q->type); + memset(b, 0, sizeof(*b)); + videobuf_status(q, b, buf, q->type); done: mutex_unlock(&q->lock); @@ -623,7 +629,7 @@ int videobuf_dqbuf(struct videobuf_queue *q, int videobuf_streamon(struct videobuf_queue *q) { struct videobuf_buffer *buf; - unsigned long flags=0; + unsigned long flags = 0; int retval; mutex_lock(&q->lock); @@ -635,12 +641,12 @@ int videobuf_streamon(struct videobuf_queue *q) goto done; q->streaming = 1; if (q->irqlock) - spin_lock_irqsave(q->irqlock,flags); + spin_lock_irqsave(q->irqlock, flags); list_for_each_entry(buf, &q->stream, stream) if (buf->state == VIDEOBUF_PREPARED) - q->ops->buf_queue(q,buf); + q->ops->buf_queue(q, buf); if (q->irqlock) - spin_unlock_irqrestore(q->irqlock,flags); + spin_unlock_irqrestore(q->irqlock, flags); done: mutex_unlock(&q->lock); @@ -676,10 +682,10 @@ static ssize_t videobuf_read_zerocopy(struct videobuf_queue *q, size_t count, loff_t *ppos) { enum v4l2_field field; - unsigned long flags=0; + unsigned long flags = 0; int retval; - MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS); + MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS); /* setup stuff */ q->read_buf = videobuf_alloc(q); @@ -691,19 +697,19 @@ static ssize_t videobuf_read_zerocopy(struct videobuf_queue *q, q->read_buf->bsize = count; field = videobuf_next_field(q); - retval = q->ops->buf_prepare(q,q->read_buf,field); + retval = q->ops->buf_prepare(q, q->read_buf, field); if (0 != retval) goto done; /* start capture & wait */ if (q->irqlock) - spin_lock_irqsave(q->irqlock,flags); - q->ops->buf_queue(q,q->read_buf); + spin_lock_irqsave(q->irqlock, flags); + q->ops->buf_queue(q, q->read_buf); if (q->irqlock) - spin_unlock_irqrestore(q->irqlock,flags); - retval = videobuf_waiton(q->read_buf,0,0); + spin_unlock_irqrestore(q->irqlock, flags); + retval = videobuf_waiton(q->read_buf, 0, 0); if (0 == retval) { - CALL(q,sync,q,q->read_buf); + CALL(q, sync, q, q->read_buf); if (VIDEOBUF_ERROR == q->read_buf->state) retval = -EIO; else @@ -712,7 +718,7 @@ static ssize_t videobuf_read_zerocopy(struct videobuf_queue *q, done: /* cleanup */ - q->ops->buf_release(q,q->read_buf); + q->ops->buf_release(q, q->read_buf); kfree(q->read_buf); q->read_buf = NULL; return retval; @@ -723,21 +729,21 @@ ssize_t videobuf_read_one(struct videobuf_queue *q, int nonblocking) { enum v4l2_field field; - unsigned long flags=0; + unsigned long flags = 0; unsigned size, nbufs; int retval; - MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS); + MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS); mutex_lock(&q->lock); nbufs = 1; size = 0; - q->ops->buf_setup(q,&nbufs,&size); + q->ops->buf_setup(q, &nbufs, &size); if (NULL == q->read_buf && count >= size && !nonblocking) { - retval = videobuf_read_zerocopy(q,data,count,ppos); + retval = videobuf_read_zerocopy(q, data, count, ppos); if (retval >= 0 || retval == -EIO) /* ok, all done */ goto done; @@ -749,25 +755,25 @@ ssize_t videobuf_read_one(struct videobuf_queue *q, retval = -ENOMEM; q->read_buf = videobuf_alloc(q); - dprintk(1,"video alloc=0x%p\n", q->read_buf); + dprintk(1, "video alloc=0x%p\n", q->read_buf); if (NULL == q->read_buf) goto done; q->read_buf->memory = V4L2_MEMORY_USERPTR; q->read_buf->bsize = count; /* preferred size */ field = videobuf_next_field(q); - retval = q->ops->buf_prepare(q,q->read_buf,field); + retval = q->ops->buf_prepare(q, q->read_buf, field); if (0 != retval) { - kfree (q->read_buf); + kfree(q->read_buf); q->read_buf = NULL; goto done; } if (q->irqlock) - spin_lock_irqsave(q->irqlock,flags); + spin_lock_irqsave(q->irqlock, flags); - q->ops->buf_queue(q,q->read_buf); + q->ops->buf_queue(q, q->read_buf); if (q->irqlock) - spin_unlock_irqrestore(q->irqlock,flags); + spin_unlock_irqrestore(q->irqlock, flags); q->read_off = 0; } @@ -776,11 +782,11 @@ ssize_t videobuf_read_one(struct videobuf_queue *q, if (0 != retval) goto done; - CALL(q,sync,q,q->read_buf); + CALL(q, sync, q, q->read_buf); if (VIDEOBUF_ERROR == q->read_buf->state) { /* catch I/O errors */ - q->ops->buf_release(q,q->read_buf); + q->ops->buf_release(q, q->read_buf); kfree(q->read_buf); q->read_buf = NULL; retval = -EIO; @@ -788,14 +794,14 @@ ssize_t videobuf_read_one(struct videobuf_queue *q, } /* Copy to userspace */ - retval=CALL(q,video_copy_to_user,q,data,count,nonblocking); - if (retval<0) + retval = CALL(q, video_copy_to_user, q, data, count, nonblocking); + if (retval < 0) goto done; q->read_off += retval; if (q->read_off == q->read_buf->size) { /* all data copied, cleanup */ - q->ops->buf_release(q,q->read_buf); + q->ops->buf_release(q, q->read_buf); kfree(q->read_buf); q->read_buf = NULL; } @@ -809,11 +815,11 @@ ssize_t videobuf_read_one(struct videobuf_queue *q, int __videobuf_read_start(struct videobuf_queue *q) { enum v4l2_field field; - unsigned long flags=0; + unsigned long flags = 0; unsigned int count = 0, size = 0; int err, i; - q->ops->buf_setup(q,&count,&size); + q->ops->buf_setup(q, &count, &size); if (count < 2) count = 2; if (count > VIDEO_MAX_FRAME) @@ -828,17 +834,17 @@ int __videobuf_read_start(struct videobuf_queue *q) for (i = 0; i < count; i++) { field = videobuf_next_field(q); - err = q->ops->buf_prepare(q,q->bufs[i],field); + err = q->ops->buf_prepare(q, q->bufs[i], field); if (err) return err; list_add_tail(&q->bufs[i]->stream, &q->stream); } if (q->irqlock) - spin_lock_irqsave(q->irqlock,flags); + spin_lock_irqsave(q->irqlock, flags); for (i = 0; i < count; i++) - q->ops->buf_queue(q,q->bufs[i]); + q->ops->buf_queue(q, q->bufs[i]); if (q->irqlock) - spin_unlock_irqrestore(q->irqlock,flags); + spin_unlock_irqrestore(q->irqlock, flags); q->reading = 1; return 0; } @@ -859,7 +865,7 @@ static void __videobuf_read_stop(struct videobuf_queue *q) } q->read_buf = NULL; q->reading = 0; - + } int videobuf_read_start(struct videobuf_queue *q) @@ -899,11 +905,11 @@ ssize_t videobuf_read_stream(struct videobuf_queue *q, int vbihack, int nonblocking) { int rc, retval; - unsigned long flags=0; + unsigned long flags = 0; - MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS); + MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS); - dprintk(2,"%s\n",__FUNCTION__); + dprintk(2, "%s\n", __FUNCTION__); mutex_lock(&q->lock); retval = -EBUSY; if (q->streaming) @@ -932,7 +938,7 @@ ssize_t videobuf_read_stream(struct videobuf_queue *q, } if (q->read_buf->state == VIDEOBUF_DONE) { - rc = CALL (q,copy_stream, q, data + retval, count, + rc = CALL(q, copy_stream, q, data + retval, count, retval, vbihack, nonblocking); if (rc < 0) { retval = rc; @@ -953,10 +959,10 @@ ssize_t videobuf_read_stream(struct videobuf_queue *q, list_add_tail(&q->read_buf->stream, &q->stream); if (q->irqlock) - spin_lock_irqsave(q->irqlock,flags); - q->ops->buf_queue(q,q->read_buf); + spin_lock_irqsave(q->irqlock, flags); + q->ops->buf_queue(q, q->read_buf); if (q->irqlock) - spin_unlock_irqrestore(q->irqlock,flags); + spin_unlock_irqrestore(q->irqlock, flags); q->read_buf = NULL; } if (retval < 0) @@ -1012,10 +1018,10 @@ int videobuf_mmap_mapper(struct videobuf_queue *q, { int retval; - MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS); + MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS); mutex_lock(&q->lock); - retval=CALL(q,mmap_mapper,q,vma); + retval = CALL(q, mmap_mapper, q, vma); mutex_unlock(&q->lock); return retval; @@ -1026,15 +1032,15 @@ int videobuf_cgmbuf(struct videobuf_queue *q, struct video_mbuf *mbuf, int count) { struct v4l2_requestbuffers req; - int rc,i; + int rc, i; - MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS); + MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS); - memset(&req,0,sizeof(req)); + memset(&req, 0, sizeof(req)); req.type = q->type; req.count = count; req.memory = V4L2_MEMORY_MMAP; - rc = videobuf_reqbufs(q,&req); + rc = videobuf_reqbufs(q, &req); if (rc < 0) return rc; @@ -1079,9 +1085,3 @@ EXPORT_SYMBOL_GPL(videobuf_poll_stream); EXPORT_SYMBOL_GPL(videobuf_mmap_setup); EXPORT_SYMBOL_GPL(videobuf_mmap_free); EXPORT_SYMBOL_GPL(videobuf_mmap_mapper); - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ -- cgit v1.2.3-59-g8ed1b From 0170a48274acbed20b3b8d1f4a6cecd08ae5015e Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 7 Dec 2007 20:31:17 -0300 Subject: V4L/DVB (6762): ivtv: update version number to 1.2 Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/ivtv/ivtv-version.h b/drivers/media/video/ivtv/ivtv-version.h index d050de2a7229..0f1d4cc4b4d9 100644 --- a/drivers/media/video/ivtv/ivtv-version.h +++ b/drivers/media/video/ivtv/ivtv-version.h @@ -22,7 +22,7 @@ #define IVTV_DRIVER_NAME "ivtv" #define IVTV_DRIVER_VERSION_MAJOR 1 -#define IVTV_DRIVER_VERSION_MINOR 1 +#define IVTV_DRIVER_VERSION_MINOR 2 #define IVTV_DRIVER_VERSION_PATCHLEVEL 0 #define IVTV_VERSION __stringify(IVTV_DRIVER_VERSION_MAJOR) "." __stringify(IVTV_DRIVER_VERSION_MINOR) "." __stringify(IVTV_DRIVER_VERSION_PATCHLEVEL) -- cgit v1.2.3-59-g8ed1b From e08323f099b5aba28610a856fa7d21d0d86fd4f0 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 7 Dec 2007 20:40:16 -0300 Subject: V4L/DVB (6763): ivtv: add AVerMedia EZMaker PCI Deluxe support Add support for the AVerMedia EZMaker PCI Deluxe and update the ivtv cardlist. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.ivtv | 6 ++++++ drivers/media/video/ivtv/ivtv-cards.c | 29 +++++++++++++++++++++++++++++ drivers/media/video/ivtv/ivtv-cards.h | 3 ++- drivers/media/video/ivtv/ivtv-driver.c | 1 + 4 files changed, 38 insertions(+), 1 deletion(-) diff --git a/Documentation/video4linux/CARDLIST.ivtv b/Documentation/video4linux/CARDLIST.ivtv index ddd76a0eb100..a019e27e42b3 100644 --- a/Documentation/video4linux/CARDLIST.ivtv +++ b/Documentation/video4linux/CARDLIST.ivtv @@ -16,3 +16,9 @@ 16 -> GOTVIEW PCI DVD2 Deluxe [ffac:0600] 17 -> Yuan MPC622 [ff01:d998] 18 -> Digital Cowboy DCT-MTVP1 [1461:bfff] +19 -> Yuan PG600V2/GotView PCI DVD Lite [ffab:0600,ffad:0600] +20 -> Club3D ZAP-TV1x01 [ffab:0600] +21 -> AverTV MCE 116 Plus [1461:c439] +22 -> ASUS Falcon2 [1043:4b66,1043:462e,1043:4b2e] +23 -> AverMedia PVR-150 Plus [1461:c035] +24 -> AverMedia EZMaker PCI Deluxe [1461:c03f] diff --git a/drivers/media/video/ivtv/ivtv-cards.c b/drivers/media/video/ivtv/ivtv-cards.c index 4bb2fe8bce0b..715285e60089 100644 --- a/drivers/media/video/ivtv/ivtv-cards.c +++ b/drivers/media/video/ivtv/ivtv-cards.c @@ -956,6 +956,34 @@ static const struct ivtv_card ivtv_card_aver_pvr150 = { /* ------------------------------------------------------------------------- */ +/* AVerMedia EZMaker PCI Deluxe card */ + +static const struct ivtv_card_pci_info ivtv_pci_aver_ezmaker[] = { + { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_AVERMEDIA, 0xc03f }, + { 0, 0, 0 } +}; + +static const struct ivtv_card ivtv_card_aver_ezmaker = { + .type = IVTV_CARD_AVER_EZMAKER, + .name = "AVerMedia EZMaker PCI Deluxe", + .v4l2_capabilities = IVTV_CAP_ENCODER, + .hw_video = IVTV_HW_CX25840, + .hw_audio = IVTV_HW_CX25840, + .hw_audio_ctrl = IVTV_HW_CX25840, + .hw_all = IVTV_HW_CX25840 | IVTV_HW_WM8739, + .video_inputs = { + { IVTV_CARD_INPUT_SVIDEO1, 0, CX25840_SVIDEO3 }, + { IVTV_CARD_INPUT_COMPOSITE1, 0, CX25840_COMPOSITE1 }, + }, + .audio_inputs = { + { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL, 0 }, + }, + .gpio_init = { .direction = 0x4000, .initial_value = 0x4000 }, + .pci_list = ivtv_pci_aver_ezmaker, +}; + +/* ------------------------------------------------------------------------- */ + /* ASUS Falcon2 */ static const struct ivtv_card_pci_info ivtv_pci_asus_falcon2[] = { @@ -1016,6 +1044,7 @@ static const struct ivtv_card *ivtv_card_list[] = { &ivtv_card_avertv_mce116, &ivtv_card_asus_falcon2, &ivtv_card_aver_pvr150, + &ivtv_card_aver_ezmaker, /* Variations of standard cards but with the same PCI IDs. These cards must come last in this list. */ diff --git a/drivers/media/video/ivtv/ivtv-cards.h b/drivers/media/video/ivtv/ivtv-cards.h index 881b04473163..b982fb06c584 100644 --- a/drivers/media/video/ivtv/ivtv-cards.h +++ b/drivers/media/video/ivtv/ivtv-cards.h @@ -47,7 +47,8 @@ #define IVTV_CARD_AVERTV_MCE116 20 /* AVerTV MCE 116 Plus */ #define IVTV_CARD_ASUS_FALCON2 21 /* ASUS Falcon2 */ #define IVTV_CARD_AVER_PVR150PLUS 22 /* AVerMedia PVR-150 Plus */ -#define IVTV_CARD_LAST 22 +#define IVTV_CARD_AVER_EZMAKER 23 /* AVerMedia EZMaker PCI Deluxe */ +#define IVTV_CARD_LAST 23 /* Variants of existing cards but with the same PCI IDs. The driver detects these based on other device information. diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index 7c600d0f48cd..4595c7807f2c 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -187,6 +187,7 @@ MODULE_PARM_DESC(cardtype, "\t\t\t21 = AverTV MCE 116 Plus\n" "\t\t\t22 = ASUS Falcon2\n" "\t\t\t23 = AverMedia PVR-150 Plus\n" + "\t\t\t24 = AverMedia EZMaker PCI Deluxe\n" "\t\t\t 0 = Autodetect (default)\n" "\t\t\t-1 = Ignore this card\n\t\t"); MODULE_PARM_DESC(pal, "Set PAL standard: B, G, H, D, K, I, M, N, Nc, 60"); -- cgit v1.2.3-59-g8ed1b From 9d1a16a4fc39bd908d85e0b7ce167048200d2d2b Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 7 Dec 2007 20:48:29 -0300 Subject: V4L/DVB (6764): ivtv: select VIDEO_IR in Kconfig Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/ivtv/Kconfig b/drivers/media/video/ivtv/Kconfig index 6e5eed5e2438..270906fc3146 100644 --- a/drivers/media/video/ivtv/Kconfig +++ b/drivers/media/video/ivtv/Kconfig @@ -3,6 +3,7 @@ config VIDEO_IVTV depends on VIDEO_V4L1 && VIDEO_V4L2 && PCI && I2C && EXPERIMENTAL select I2C_ALGOBIT select FW_LOADER + select VIDEO_IR select VIDEO_TUNER select VIDEO_TVEEPROM select VIDEO_CX2341X -- cgit v1.2.3-59-g8ed1b From d9009201207c4bdce9b95a0bd903b3f087e8eda1 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 7 Dec 2007 21:01:15 -0300 Subject: V4L/DVB (6765): ivtv: convert to bus-based i2c API Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-cards.c | 47 ++++++++++++++ drivers/media/video/ivtv/ivtv-cards.h | 24 ++++--- drivers/media/video/ivtv/ivtv-driver.c | 86 ++++++++++++-------------- drivers/media/video/ivtv/ivtv-driver.h | 2 +- drivers/media/video/ivtv/ivtv-i2c.c | 110 +++++++++++++++++++++++++-------- drivers/media/video/ivtv/ivtv-i2c.h | 1 + 6 files changed, 187 insertions(+), 83 deletions(-) diff --git a/drivers/media/video/ivtv/ivtv-cards.c b/drivers/media/video/ivtv/ivtv-cards.c index 715285e60089..26322e933999 100644 --- a/drivers/media/video/ivtv/ivtv-cards.c +++ b/drivers/media/video/ivtv/ivtv-cards.c @@ -40,6 +40,27 @@ #define MSP_MONO MSP_INPUT(MSP_IN_MONO, MSP_IN_TUNER1, \ MSP_DSP_IN_SCART, MSP_DSP_IN_SCART) +/* usual i2c tuner addresses to probe */ +static struct ivtv_card_tuner_i2c ivtv_i2c_std = { + .radio = { I2C_CLIENT_END }, + .demod = { 0x43, I2C_CLIENT_END }, + .tv = { 0x61, 0x60, I2C_CLIENT_END }, +}; + +/* as above, but with possible radio tuner */ +static struct ivtv_card_tuner_i2c ivtv_i2c_radio = { + .radio = { 0x60, I2C_CLIENT_END }, + .demod = { 0x43, I2C_CLIENT_END }, + .tv = { 0x61, I2C_CLIENT_END }, +}; + +/* using the tda8290+75a combo */ +static struct ivtv_card_tuner_i2c ivtv_i2c_tda8290 = { + .radio = { I2C_CLIENT_END }, + .demod = { I2C_CLIENT_END }, + .tv = { 0x4b, I2C_CLIENT_END }, +}; + /********************** card configuration *******************************/ /* Please add new PCI IDs to: http://pci-ids.ucw.cz/iii @@ -73,6 +94,7 @@ static const struct ivtv_card ivtv_card_pvr250 = { { IVTV_CARD_INPUT_LINE_IN2, MSP_SCART3 }, }, .radio_input = { IVTV_CARD_INPUT_AUD_TUNER, MSP_SCART2 }, + .i2c = &ivtv_i2c_std, }; /* ------------------------------------------------------------------------- */ @@ -127,6 +149,7 @@ static const struct ivtv_card ivtv_card_pvr350 = { { IVTV_CARD_INPUT_LINE_IN2, MSP_SCART3 }, }, .radio_input = { IVTV_CARD_INPUT_AUD_TUNER, MSP_SCART2 }, + .i2c = &ivtv_i2c_std, }; /* PVR-350 V1 boards have a different audio tuner input and use a @@ -158,6 +181,7 @@ static const struct ivtv_card ivtv_card_pvr350_v1 = { { IVTV_CARD_INPUT_LINE_IN2, MSP_SCART3 }, }, .radio_input = { IVTV_CARD_INPUT_AUD_TUNER, MSP_SCART2 }, + .i2c = &ivtv_i2c_std, }; /* ------------------------------------------------------------------------- */ @@ -193,6 +217,7 @@ static const struct ivtv_card ivtv_card_pvr150 = { CX25840_AUDIO_SERIAL, WM8775_AIN4 }, /* apparently needed for the IR blaster */ .gpio_init = { .direction = 0x1f01, .initial_value = 0x26f3 }, + .i2c = &ivtv_i2c_std, }; /* ------------------------------------------------------------------------- */ @@ -235,6 +260,7 @@ static const struct ivtv_card ivtv_card_m179 = { { .std = V4L2_STD_ALL, .tuner = TUNER_PHILIPS_NTSC }, }, .pci_list = ivtv_pci_m179, + .i2c = &ivtv_i2c_std, }; /* ------------------------------------------------------------------------- */ @@ -276,6 +302,7 @@ static const struct ivtv_card ivtv_card_mpg600 = { { .std = V4L2_STD_ALL, .tuner = TUNER_PHILIPS_FQ1286 }, }, .pci_list = ivtv_pci_mpg600, + .i2c = &ivtv_i2c_std, }; /* ------------------------------------------------------------------------- */ @@ -316,6 +343,7 @@ static const struct ivtv_card ivtv_card_mpg160 = { { .std = V4L2_STD_ALL, .tuner = TUNER_PHILIPS_FQ1286 }, }, .pci_list = ivtv_pci_mpg160, + .i2c = &ivtv_i2c_std, }; /* ------------------------------------------------------------------------- */ @@ -351,6 +379,7 @@ static const struct ivtv_card ivtv_card_pg600 = { { .std = V4L2_STD_ALL, .tuner = TUNER_PHILIPS_FQ1286 }, }, .pci_list = ivtv_pci_pg600, + .i2c = &ivtv_i2c_std, }; /* ------------------------------------------------------------------------- */ @@ -394,6 +423,7 @@ static const struct ivtv_card ivtv_card_avc2410 = { { .std = V4L2_STD_ALL, .tuner = TUNER_PHILIPS_FM1236_MK3 }, }, .pci_list = ivtv_pci_avc2410, + .i2c = &ivtv_i2c_std, }; /* ------------------------------------------------------------------------- */ @@ -464,6 +494,7 @@ static const struct ivtv_card ivtv_card_tg5000tv = { { .std = V4L2_STD_525_60, .tuner = TUNER_PHILIPS_FQ1286 }, }, .pci_list = ivtv_pci_tg5000tv, + .i2c = &ivtv_i2c_std, }; /* ------------------------------------------------------------------------- */ @@ -494,6 +525,7 @@ static const struct ivtv_card ivtv_card_va2000 = { { .std = V4L2_STD_525_60, .tuner = TUNER_PHILIPS_FQ1286 }, }, .pci_list = ivtv_pci_va2000, + .i2c = &ivtv_i2c_std, }; /* ------------------------------------------------------------------------- */ @@ -538,6 +570,7 @@ static const struct ivtv_card ivtv_card_cx23416gyc = { { .std = V4L2_STD_ALL, .tuner = TUNER_PHILIPS_FM1236_MK3 }, }, .pci_list = ivtv_pci_cx23416gyc, + .i2c = &ivtv_i2c_std, }; static const struct ivtv_card ivtv_card_cx23416gyc_nogr = { @@ -568,6 +601,7 @@ static const struct ivtv_card ivtv_card_cx23416gyc_nogr = { { .std = V4L2_STD_625_50, .tuner = TUNER_PHILIPS_FM1216ME_MK3 }, { .std = V4L2_STD_ALL, .tuner = TUNER_PHILIPS_FM1236_MK3 }, }, + .i2c = &ivtv_i2c_std, }; static const struct ivtv_card ivtv_card_cx23416gyc_nogrycs = { @@ -597,6 +631,7 @@ static const struct ivtv_card ivtv_card_cx23416gyc_nogrycs = { { .std = V4L2_STD_625_50, .tuner = TUNER_PHILIPS_FM1216ME_MK3 }, { .std = V4L2_STD_ALL, .tuner = TUNER_PHILIPS_FM1236_MK3 }, }, + .i2c = &ivtv_i2c_std, }; /* ------------------------------------------------------------------------- */ @@ -636,6 +671,7 @@ static const struct ivtv_card ivtv_card_gv_mvprx = { { .std = V4L2_STD_525_60, .tuner = TUNER_PANASONIC_VP27 }, }, .pci_list = ivtv_pci_gv_mvprx, + .i2c = &ivtv_i2c_std, }; /* ------------------------------------------------------------------------- */ @@ -672,6 +708,7 @@ static const struct ivtv_card ivtv_card_gv_mvprx2e = { { .std = V4L2_STD_525_60, .tuner = TUNER_PANASONIC_VP27 }, }, .pci_list = ivtv_pci_gv_mvprx2e, + .i2c = &ivtv_i2c_std, }; /* ------------------------------------------------------------------------- */ @@ -706,6 +743,7 @@ static const struct ivtv_card ivtv_card_gotview_pci_dvd = { { .std = V4L2_STD_625_50, .tuner = TUNER_PHILIPS_FM1216ME_MK3 }, }, .pci_list = ivtv_pci_gotview_pci_dvd, + .i2c = &ivtv_i2c_std, }; /* ------------------------------------------------------------------------- */ @@ -744,6 +782,7 @@ static const struct ivtv_card ivtv_card_gotview_pci_dvd2 = { { .std = V4L2_STD_625_50, .tuner = TUNER_PHILIPS_FM1216ME_MK3 }, }, .pci_list = ivtv_pci_gotview_pci_dvd2, + .i2c = &ivtv_i2c_std, }; /* ------------------------------------------------------------------------- */ @@ -779,6 +818,7 @@ static const struct ivtv_card ivtv_card_yuan_mpc622 = { { .std = V4L2_STD_ALL, .tuner = TUNER_PHILIPS_TDA8290 }, }, .pci_list = ivtv_pci_yuan_mpc622, + .i2c = &ivtv_i2c_tda8290, }; /* ------------------------------------------------------------------------- */ @@ -820,6 +860,7 @@ static const struct ivtv_card ivtv_card_dctmvtvp1 = { { .std = V4L2_STD_525_60, .tuner = TUNER_PHILIPS_FQ1286 }, }, .pci_list = ivtv_pci_dctmvtvp1, + .i2c = &ivtv_i2c_std, }; /* ------------------------------------------------------------------------- */ @@ -852,6 +893,7 @@ static const struct ivtv_card ivtv_card_pg600v2 = { { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, }, .pci_list = ivtv_pci_pg600v2, + .i2c = &ivtv_i2c_std, }; /* ------------------------------------------------------------------------- */ @@ -883,6 +925,7 @@ static const struct ivtv_card ivtv_card_club3d = { { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, }, .pci_list = ivtv_pci_club3d, + .i2c = &ivtv_i2c_std, }; /* ------------------------------------------------------------------------- */ @@ -914,6 +957,7 @@ static const struct ivtv_card ivtv_card_avertv_mce116 = { { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, }, .pci_list = ivtv_pci_avertv_mce116, + .i2c = &ivtv_i2c_std, }; /* ------------------------------------------------------------------------- */ @@ -952,6 +996,7 @@ static const struct ivtv_card ivtv_card_aver_pvr150 = { { .std = V4L2_STD_525_60, .tuner = TUNER_TCL_2002N }, }, .pci_list = ivtv_pci_aver_pvr150, + .i2c = &ivtv_i2c_radio, }; /* ------------------------------------------------------------------------- */ @@ -979,6 +1024,7 @@ static const struct ivtv_card ivtv_card_aver_ezmaker = { { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL, 0 }, }, .gpio_init = { .direction = 0x4000, .initial_value = 0x4000 }, + /* Does not have a tuner */ .pci_list = ivtv_pci_aver_ezmaker, }; @@ -1018,6 +1064,7 @@ static const struct ivtv_card ivtv_card_asus_falcon2 = { { .std = V4L2_STD_525_60, .tuner = TUNER_PHILIPS_FM1236_MK3 }, }, .pci_list = ivtv_pci_asus_falcon2, + .i2c = &ivtv_i2c_std, }; static const struct ivtv_card *ivtv_card_list[] = { diff --git a/drivers/media/video/ivtv/ivtv-cards.h b/drivers/media/video/ivtv/ivtv-cards.h index b982fb06c584..191aafdd9968 100644 --- a/drivers/media/video/ivtv/ivtv-cards.h +++ b/drivers/media/video/ivtv/ivtv-cards.h @@ -84,7 +84,7 @@ #define IVTV_PCI_ID_GOTVIEW1 0xffac #define IVTV_PCI_ID_GOTVIEW2 0xffad -/* hardware flags */ +/* hardware flags, no gaps allowed, IVTV_HW_GPIO must always be last */ #define IVTV_HW_CX25840 (1 << 0) #define IVTV_HW_SAA7115 (1 << 1) #define IVTV_HW_SAA7127 (1 << 2) @@ -94,14 +94,13 @@ #define IVTV_HW_CS53L32A (1 << 6) #define IVTV_HW_TVEEPROM (1 << 7) #define IVTV_HW_SAA7114 (1 << 8) -#define IVTV_HW_TVAUDIO (1 << 9) -#define IVTV_HW_UPD64031A (1 << 10) -#define IVTV_HW_UPD6408X (1 << 11) -#define IVTV_HW_SAA717X (1 << 12) -#define IVTV_HW_WM8739 (1 << 13) -#define IVTV_HW_VP27SMPX (1 << 14) -#define IVTV_HW_M52790 (1 << 15) -#define IVTV_HW_GPIO (1 << 16) +#define IVTV_HW_UPD64031A (1 << 9) +#define IVTV_HW_UPD6408X (1 << 10) +#define IVTV_HW_SAA717X (1 << 11) +#define IVTV_HW_WM8739 (1 << 12) +#define IVTV_HW_VP27SMPX (1 << 13) +#define IVTV_HW_M52790 (1 << 14) +#define IVTV_HW_GPIO (1 << 15) #define IVTV_HW_SAA711X (IVTV_HW_SAA7115 | IVTV_HW_SAA7114) @@ -235,6 +234,12 @@ struct ivtv_card_tuner { int tuner; /* tuner ID (from tuner.h) */ }; +struct ivtv_card_tuner_i2c { + unsigned short radio[2];/* radio tuner i2c address to probe */ + unsigned short demod[2];/* demodulator i2c address to probe */ + unsigned short tv[4]; /* tv tuner i2c addresses to probe */ +}; + /* for card information/parameters */ struct ivtv_card { int type; @@ -262,6 +267,7 @@ struct ivtv_card { struct ivtv_gpio_audio_detect gpio_audio_detect; struct ivtv_card_tuner tuners[IVTV_CARD_MAX_TUNERS]; + struct ivtv_card_tuner_i2c *i2c; /* list of device and subsystem vendor/devices that correspond to this card type. */ diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index 4595c7807f2c..4994dc59d40c 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -400,6 +400,7 @@ static void ivtv_process_eeprom(struct ivtv *itv) itv->v4l2_cap = itv->card->v4l2_capabilities; itv->card_name = itv->card->name; + itv->card_i2c = itv->card->i2c; /* If this is a PVR500 then it should be possible to detect whether it is the first or second unit by looking at the subsystem device ID: is bit 4 is @@ -417,7 +418,14 @@ static void ivtv_process_eeprom(struct ivtv *itv) This detection is needed since the eeprom reports incorrectly that a radio is present on the second unit. */ if (tv.model / 1000 == 23) { + static const struct ivtv_card_tuner_i2c ivtv_i2c_radio = { + .radio = { 0x60, I2C_CLIENT_END }, + .demod = { 0x43, I2C_CLIENT_END }, + .tv = { 0x61, I2C_CLIENT_END }, + }; + itv->card_name = "WinTV PVR 500"; + itv->card_i2c = &ivtv_i2c_radio; if (pci_slot == 8 || pci_slot == 9) { int is_first = (pci_slot & 1) == 0; @@ -635,6 +643,7 @@ done: } itv->v4l2_cap = itv->card->v4l2_capabilities; itv->card_name = itv->card->name; + itv->card_i2c = itv->card->i2c; } /* Precondition: the ivtv structure has been memset to 0. Only @@ -816,79 +825,66 @@ static int ivtv_setup_pci(struct ivtv *itv, struct pci_dev *dev, return 0; } -static void ivtv_request_module(struct ivtv *itv, const char *name) +static u32 ivtv_request_module(struct ivtv *itv, u32 hw, + const char *name, u32 id) { + if ((hw & id) == 0) + return hw; if (request_module(name) != 0) { IVTV_ERR("Failed to load module %s\n", name); - } else { - IVTV_DEBUG_INFO("Loaded module %s\n", name); + return hw & ~id; } + IVTV_DEBUG_INFO("Loaded module %s\n", name); + return hw; } static void ivtv_load_and_init_modules(struct ivtv *itv) { u32 hw = itv->card->hw_all; - int i; + unsigned i; /* load modules */ -#ifndef CONFIG_VIDEO_TUNER - if (hw & IVTV_HW_TUNER) { - if (itv->options.tuner == TUNER_XC2028) { - IVTV_INFO("Xceive tuner not yet supported, only composite and S-Video inputs will be available\n"); - itv->tunerid = 1; - } - else { - ivtv_request_module(itv, "tuner"); - } + if ((hw & IVTV_HW_TUNER) && itv->options.tuner == TUNER_XC2028) { + IVTV_INFO("Xceive tuner not yet supported, only composite\n"); + IVTV_INFO("and S-Video inputs will be available\n"); + hw &= ~IVTV_HW_TUNER; } +#ifndef CONFIG_VIDEO_TUNER + hw = ivtv_request_module(itv, hw, "tuner", IVTV_HW_TUNER); #endif #ifndef CONFIG_VIDEO_CX25840 - if (hw & IVTV_HW_CX25840) - ivtv_request_module(itv, "cx25840"); + hw = ivtv_request_module(itv, hw, "cx25840", IVTV_HW_CX25840); #endif #ifndef CONFIG_VIDEO_SAA711X - if (hw & IVTV_HW_SAA711X) - ivtv_request_module(itv, "saa7115"); + hw = ivtv_request_module(itv, hw, "saa7115", IVTV_HW_SAA711X); #endif #ifndef CONFIG_VIDEO_SAA7127 - if (hw & IVTV_HW_SAA7127) - ivtv_request_module(itv, "saa7127"); + hw = ivtv_request_module(itv, hw, "saa7127", IVTV_HW_SAA7127); #endif - if (hw & IVTV_HW_SAA717X) - ivtv_request_module(itv, "saa717x"); + hw = ivtv_request_module(itv, hw, "saa717x", IVTV_HW_SAA717X); #ifndef CONFIG_VIDEO_UPD64031A - if (hw & IVTV_HW_UPD64031A) - ivtv_request_module(itv, "upd64031a"); + hw = ivtv_request_module(itv, hw, "upd64031a", IVTV_HW_UPD64031A); #endif #ifndef CONFIG_VIDEO_UPD64083 - if (hw & IVTV_HW_UPD6408X) - ivtv_request_module(itv, "upd64083"); + hw = ivtv_request_module(itv, hw, "upd64083", IVTV_HW_UPD6408X); #endif #ifndef CONFIG_VIDEO_MSP3400 - if (hw & IVTV_HW_MSP34XX) - ivtv_request_module(itv, "msp3400"); + hw = ivtv_request_module(itv, hw, "msp3400", IVTV_HW_MSP34XX); #endif #ifndef CONFIG_VIDEO_VP27SMPX - if (hw & IVTV_HW_VP27SMPX) - ivtv_request_module(itv, "vp27smpx"); + hw = ivtv_request_module(itv, hw, "vp27smpx", IVTV_HW_VP27SMPX); #endif - if (hw & IVTV_HW_TVAUDIO) - ivtv_request_module(itv, "tvaudio"); #ifndef CONFIG_VIDEO_WM8775 - if (hw & IVTV_HW_WM8775) - ivtv_request_module(itv, "wm8775"); + hw = ivtv_request_module(itv, hw, "wm8775", IVTV_HW_WM8775); #endif #ifndef CONFIG_VIDEO_WM8739 - if (hw & IVTV_HW_WM8739) - ivtv_request_module(itv, "wm8739"); + hw = ivtv_request_module(itv, hw, "wm8739", IVTV_HW_WM8739); #endif #ifndef CONFIG_VIDEO_CS53L32A - if (hw & IVTV_HW_CS53L32A) - ivtv_request_module(itv, "cs53l32a"); + hw = ivtv_request_module(itv, hw, "cs53l32a", IVTV_HW_CS53L32A); #endif #ifndef CONFIG_VIDEO_M52790 - if (hw & IVTV_HW_M52790) - ivtv_request_module(itv, "m52790"); + hw = ivtv_request_module(itv, hw, "m52790", IVTV_HW_M52790); #endif /* check which i2c devices are actually found */ @@ -897,11 +893,12 @@ static void ivtv_load_and_init_modules(struct ivtv *itv) if (!(device & hw)) continue; - if (device == IVTV_HW_GPIO) { - /* GPIO is always available */ - itv->hw_flags |= IVTV_HW_GPIO; + if (device == IVTV_HW_GPIO || device == IVTV_HW_TVEEPROM) { + /* GPIO and TVEEPROM do not use i2c probing */ + itv->hw_flags |= device; continue; } + ivtv_i2c_register(itv, i); if (ivtv_i2c_hw_addr(itv, device) > 0) itv->hw_flags |= device; } @@ -1075,9 +1072,6 @@ static int __devinit ivtv_probe(struct pci_dev *dev, IVTV_DEBUG_INFO("Active card count: %d.\n", ivtv_cards_active); if (itv->card->hw_all & IVTV_HW_TVEEPROM) { -#ifdef CONFIG_VIDEO_TVEEPROM_MODULE - ivtv_request_module(itv, "tveeprom"); -#endif /* Based on the model number the cardtype may be changed. The PCI IDs are not always reliable. */ ivtv_process_eeprom(itv); @@ -1150,7 +1144,7 @@ static int __devinit ivtv_probe(struct pci_dev *dev, if (itv->options.radio > 0) itv->v4l2_cap |= V4L2_CAP_RADIO; - if (itv->options.tuner > -1 && itv->tunerid == 0) { + if (itv->options.tuner > -1) { struct tuner_setup setup; setup.addr = ADDR_UNSET; diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h index 19a9b3bac190..8eeea3a0c700 100644 --- a/drivers/media/video/ivtv/ivtv-driver.h +++ b/drivers/media/video/ivtv/ivtv-driver.h @@ -590,13 +590,13 @@ struct ivtv { struct pci_dev *dev; /* PCI device */ const struct ivtv_card *card; /* card information */ const char *card_name; /* full name of the card */ + const struct ivtv_card_tuner_i2c *card_i2c; /* i2c addresses to probe for tuner */ u8 has_cx23415; /* 1 if it is a cx23415 based card, 0 for cx23416 */ u8 pvr150_workaround; /* 1 if the cx25840 needs to workaround a PVR150 bug */ u8 nof_inputs; /* number of video inputs */ u8 nof_audio_inputs; /* number of audio inputs */ u32 v4l2_cap; /* V4L2 capabilities of card */ u32 hw_flags; /* hardware description of the board */ - int tunerid; /* userspace tuner ID for experimental Xceive tuner support */ v4l2_std_id tuner_std; /* the norm of the card's tuner (fixed) */ /* controlling video decoder function */ int (*video_dec_func)(struct ivtv *, unsigned int, void *); diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c index 7f513ecc0781..9acfde68116a 100644 --- a/drivers/media/video/ivtv/ivtv-i2c.c +++ b/drivers/media/video/ivtv/ivtv-i2c.c @@ -92,7 +92,8 @@ #define IVTV_TEA5767_I2C_ADDR 0x60 #define IVTV_UPD64031A_I2C_ADDR 0x12 #define IVTV_UPD64083_I2C_ADDR 0x5c -#define IVTV_TDA985X_I2C_ADDR 0x5b +#define IVTV_VP27SMPX_I2C_ADDR 0x5b +#define IVTV_M52790_I2C_ADDR 0x48 /* This array should match the IVTV_HW_ defines */ static const u8 hw_driverids[] = { @@ -105,7 +106,6 @@ static const u8 hw_driverids[] = { I2C_DRIVERID_CS53L32A, I2C_DRIVERID_TVEEPROM, I2C_DRIVERID_SAA711X, - I2C_DRIVERID_TVAUDIO, I2C_DRIVERID_UPD64031A, I2C_DRIVERID_UPD64083, I2C_DRIVERID_SAA717X, @@ -115,9 +115,29 @@ static const u8 hw_driverids[] = { 0 /* IVTV_HW_GPIO dummy driver ID */ }; +/* This array should match the IVTV_HW_ defines */ +static const u8 hw_addrs[] = { + IVTV_CX25840_I2C_ADDR, + IVTV_SAA7115_I2C_ADDR, + IVTV_SAA7127_I2C_ADDR, + IVTV_MSP3400_I2C_ADDR, + 0, + IVTV_WM8775_I2C_ADDR, + IVTV_CS53L32A_I2C_ADDR, + 0, + IVTV_SAA7115_I2C_ADDR, + IVTV_UPD64031A_I2C_ADDR, + IVTV_UPD64083_I2C_ADDR, + IVTV_SAA717x_I2C_ADDR, + IVTV_WM8739_I2C_ADDR, + IVTV_VP27SMPX_I2C_ADDR, + IVTV_M52790_I2C_ADDR, + 0 /* IVTV_HW_GPIO dummy driver ID */ +}; + /* This array should match the IVTV_HW_ defines */ static const char * const hw_drivernames[] = { - "cx2584x", + "cx25840", "saa7115", "saa7127", "msp3400", @@ -125,8 +145,7 @@ static const char * const hw_drivernames[] = { "wm8775", "cs53l32a", "tveeprom", - "saa7114", - "tvaudio", + "saa7115", "upd64031a", "upd64083", "saa717x", @@ -136,21 +155,57 @@ static const char * const hw_drivernames[] = { "gpio", }; -static int attach_inform(struct i2c_client *client) +int ivtv_i2c_register(struct ivtv *itv, unsigned idx) { - struct ivtv *itv = (struct ivtv *)i2c_get_adapdata(client->adapter); + struct i2c_board_info info; + struct i2c_client *c; + u8 id; int i; - IVTV_DEBUG_I2C("i2c client attach\n"); - for (i = 0; i < I2C_CLIENTS_MAX; i++) { - if (itv->i2c_clients[i] == NULL) { - itv->i2c_clients[i] = client; - break; - } - } + IVTV_DEBUG_I2C("i2c client register\n"); + if (idx >= ARRAY_SIZE(hw_driverids) || hw_driverids[idx] == 0) + return -1; + id = hw_driverids[idx]; + memset(&info, 0, sizeof(info)); + strcpy(info.driver_name, hw_drivernames[idx]); + info.addr = hw_addrs[idx]; + for (i = 0; itv->i2c_clients[i] && i < I2C_CLIENTS_MAX; i++) {} + if (i == I2C_CLIENTS_MAX) { - IVTV_ERR("Insufficient room for new I2C client\n"); + IVTV_ERR("insufficient room for new I2C client!\n"); + return -ENOMEM; } + + if (id != I2C_DRIVERID_TUNER) { + c = i2c_new_device(&itv->i2c_adap, &info); + if (c->driver == NULL) + i2c_unregister_device(c); + else + itv->i2c_clients[i] = c; + return itv->i2c_clients[i] ? 0 : -ENODEV; + } + + /* special tuner handling */ + c = i2c_new_probed_device(&itv->i2c_adap, &info, itv->card_i2c->radio); + if (c && c->driver == NULL) + i2c_unregister_device(c); + else if (c) + itv->i2c_clients[i++] = c; + c = i2c_new_probed_device(&itv->i2c_adap, &info, itv->card_i2c->demod); + if (c && c->driver == NULL) + i2c_unregister_device(c); + else if (c) + itv->i2c_clients[i++] = c; + c = i2c_new_probed_device(&itv->i2c_adap, &info, itv->card_i2c->tv); + if (c && c->driver == NULL) + i2c_unregister_device(c); + else if (c) + itv->i2c_clients[i++] = c; + return 0; +} + +static int attach_inform(struct i2c_client *client) +{ return 0; } @@ -478,9 +533,6 @@ static struct i2c_adapter ivtv_i2c_adap_hw_template = { .client_register = attach_inform, .client_unregister = detach_inform, .owner = THIS_MODULE, -#ifdef I2C_ADAP_CLASS_TV_ANALOG - .class = I2C_ADAP_CLASS_TV_ANALOG, -#endif }; static void ivtv_setscl_old(void *data, int state) @@ -534,9 +586,6 @@ static struct i2c_adapter ivtv_i2c_adap_template = { .client_register = attach_inform, .client_unregister = detach_inform, .owner = THIS_MODULE, -#ifdef I2C_ADAP_CLASS_TV_ANALOG - .class = I2C_ADAP_CLASS_TV_ANALOG, -#endif }; static const struct i2c_algo_bit_data ivtv_i2c_algo_template = { @@ -561,12 +610,9 @@ int ivtv_call_i2c_client(struct ivtv *itv, int addr, unsigned int cmd, void *arg IVTV_DEBUG_I2C("call_i2c_client addr=%02x\n", addr); for (i = 0; i < I2C_CLIENTS_MAX; i++) { client = itv->i2c_clients[i]; - if (client == NULL) { - continue; - } - if (client->driver->command == NULL) { + if (client == NULL || client->driver == NULL || + client->driver->command == NULL) continue; - } if (addr == client->addr) { retval = client->driver->command(client, cmd, arg); return retval; @@ -587,7 +633,7 @@ static int ivtv_i2c_id_addr(struct ivtv *itv, u32 id) for (i = 0; i < I2C_CLIENTS_MAX; i++) { client = itv->i2c_clients[i]; - if (client == NULL) + if (client == NULL || client->driver == NULL) continue; if (id == client->driver->id) { retval = client->addr; @@ -713,6 +759,16 @@ int init_ivtv_i2c(struct ivtv *itv) { IVTV_DEBUG_I2C("i2c init\n"); + /* Sanity checks for the I2C hardware arrays. They must be the + * same size and GPIO must be the last entry. + */ + if (ARRAY_SIZE(hw_driverids) != ARRAY_SIZE(hw_addrs) || + ARRAY_SIZE(hw_drivernames) != ARRAY_SIZE(hw_addrs) || + IVTV_HW_GPIO != (1 << (ARRAY_SIZE(hw_addrs) - 1)) || + hw_driverids[ARRAY_SIZE(hw_addrs) - 1]) { + IVTV_ERR("Mismatched I2C hardware arrays\n"); + return -ENODEV; + } if (itv->options.newi2c > 0) { memcpy(&itv->i2c_adap, &ivtv_i2c_adap_hw_template, sizeof(struct i2c_adapter)); diff --git a/drivers/media/video/ivtv/ivtv-i2c.h b/drivers/media/video/ivtv/ivtv-i2c.h index 987042c09b64..022978cf533d 100644 --- a/drivers/media/video/ivtv/ivtv-i2c.h +++ b/drivers/media/video/ivtv/ivtv-i2c.h @@ -33,6 +33,7 @@ int ivtv_i2c_hw(struct ivtv *itv, u32 hw, unsigned int cmd, void *arg); int ivtv_i2c_id(struct ivtv *itv, u32 id, unsigned int cmd, void *arg); int ivtv_call_i2c_client(struct ivtv *itv, int addr, unsigned int cmd, void *arg); void ivtv_call_i2c_clients(struct ivtv *itv, unsigned int cmd, void *arg); +int ivtv_i2c_register(struct ivtv *itv, unsigned idx); /* init + register i2c algo-bit adapter */ int init_ivtv_i2c(struct ivtv *itv); -- cgit v1.2.3-59-g8ed1b From 2a2bfbff3d867c62a49f43266ca993c9c2c2ff28 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 8 Dec 2007 07:43:14 -0300 Subject: V4L/DVB (6766): ivtv: remove i2c legacy support from drivers that no longer need it Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/m52790.c | 4 ---- drivers/media/video/saa7127.c | 4 ---- drivers/media/video/upd64031a.c | 4 ---- drivers/media/video/upd64083.c | 4 ---- drivers/media/video/vp27smpx.c | 4 ---- drivers/media/video/wm8739.c | 3 --- include/media/v4l2-i2c-drv.h | 1 - 7 files changed, 24 deletions(-) diff --git a/drivers/media/video/m52790.c b/drivers/media/video/m52790.c index 51ecbfbc1ae7..4d2a52204ad4 100644 --- a/drivers/media/video/m52790.c +++ b/drivers/media/video/m52790.c @@ -36,10 +36,6 @@ MODULE_DESCRIPTION("i2c device driver for m52790 A/V switch"); MODULE_AUTHOR("Hans Verkuil"); MODULE_LICENSE("GPL"); -static unsigned short normal_i2c[] = { 0x90 >> 1, I2C_CLIENT_END }; - - -I2C_CLIENT_INSMOD; struct m52790_state { u16 input; diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c index 0262acde0888..a5fbfe025333 100644 --- a/drivers/media/video/saa7127.c +++ b/drivers/media/video/saa7127.c @@ -69,10 +69,6 @@ module_param(test_image, int, 0644); MODULE_PARM_DESC(debug, "debug level (0-2)"); MODULE_PARM_DESC(test_image, "test_image (0-1)"); -static unsigned short normal_i2c[] = { 0x88 >> 1, I2C_CLIENT_END }; - - -I2C_CLIENT_INSMOD; /* * SAA7127 registers diff --git a/drivers/media/video/upd64031a.c b/drivers/media/video/upd64031a.c index 0318432d85f8..1b162f2dca95 100644 --- a/drivers/media/video/upd64031a.c +++ b/drivers/media/video/upd64031a.c @@ -49,10 +49,6 @@ module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Debug level (0-1)"); -static unsigned short normal_i2c[] = { 0x24 >> 1, 0x26 >> 1, I2C_CLIENT_END }; - - -I2C_CLIENT_INSMOD; enum { R00 = 0, R01, R02, R03, R04, diff --git a/drivers/media/video/upd64083.c b/drivers/media/video/upd64083.c index 7e32c5b0c29d..0f9e86cfc628 100644 --- a/drivers/media/video/upd64083.c +++ b/drivers/media/video/upd64083.c @@ -39,10 +39,6 @@ module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "Debug level (0-1)"); -static unsigned short normal_i2c[] = { 0xb8 >> 1, 0xba >> 1, I2C_CLIENT_END }; - - -I2C_CLIENT_INSMOD; enum { R00 = 0, R01, R02, R03, R04, diff --git a/drivers/media/video/vp27smpx.c b/drivers/media/video/vp27smpx.c index 97e24769e65b..cd98084ac090 100644 --- a/drivers/media/video/vp27smpx.c +++ b/drivers/media/video/vp27smpx.c @@ -36,10 +36,6 @@ MODULE_DESCRIPTION("vp27smpx driver"); MODULE_AUTHOR("Hans Verkuil"); MODULE_LICENSE("GPL"); -static unsigned short normal_i2c[] = { 0xb6 >> 1, I2C_CLIENT_END }; - - -I2C_CLIENT_INSMOD; /* ----------------------------------------------------------------------- */ diff --git a/drivers/media/video/wm8739.c b/drivers/media/video/wm8739.c index ac4fee1d0251..1c30a5c8455c 100644 --- a/drivers/media/video/wm8739.c +++ b/drivers/media/video/wm8739.c @@ -37,15 +37,12 @@ MODULE_AUTHOR("T. Adachi, Hans Verkuil"); MODULE_LICENSE("GPL"); static int debug; -static unsigned short normal_i2c[] = { 0x34 >> 1, 0x36 >> 1, I2C_CLIENT_END }; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Debug level (0-1)"); -I2C_CLIENT_INSMOD; - /* ------------------------------------------------------------------------ */ enum { diff --git a/include/media/v4l2-i2c-drv.h b/include/media/v4l2-i2c-drv.h index bc61ab27779d..d758b765e0ff 100644 --- a/include/media/v4l2-i2c-drv.h +++ b/include/media/v4l2-i2c-drv.h @@ -34,7 +34,6 @@ struct v4l2_i2c_driver_data { }; static struct v4l2_i2c_driver_data v4l2_i2c_data; -static struct i2c_client_address_data addr_data; static struct i2c_driver v4l2_i2c_driver; -- cgit v1.2.3-59-g8ed1b From 787f5abb9519fd420c4681a560aabc449632a6c2 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Sat, 8 Dec 2007 17:08:32 -0300 Subject: V4L/DVB (6768): pvrusb2: Mark Gotview hardware as having a cx2584x part Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-devattr.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c index eed64571ca0b..7c2b976960e1 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c +++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c @@ -104,6 +104,7 @@ const struct pvr2_device_desc pvr2_device_descriptions[] = { .shortname = "gv2", .client_modules.lst = pvr2_client_gotview_2, .client_modules.cnt = ARRAY_SIZE(pvr2_client_gotview_2), + .flag_has_cx25840 = !0, .default_tuner_type = TUNER_PHILIPS_FM1216ME_MK3, .signal_routing_scheme = PVR2_ROUTING_SCHEME_GOTVIEW, }, -- cgit v1.2.3-59-g8ed1b From 4542783c3733de9a21099cd0c42e1a2392c68a88 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Sat, 8 Dec 2007 17:11:13 -0300 Subject: V4L/DVB (6769): pvrusb2: Implement experimental support for OnAir Creator and USB2 devices Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-devattr.c | 41 +++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c index 7c2b976960e1..2d6519d20f07 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c +++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c @@ -37,13 +37,34 @@ pvr2_device_desc structures. #define PVR2_HDW_TYPE_29XXX 0 #define PVR2_HDW_TYPE_24XXX 1 #define PVR2_HDW_TYPE_GOTVIEW_2 2 +#ifdef CONFIG_VIDEO_PVRUSB2_ONAIR_CREATOR +#define PVR2_HDW_TYPE_ONAIR_CREATOR 3 +#endif +#ifdef CONFIG_VIDEO_PVRUSB2_ONAIR_USB2 +#define PVR2_HDW_TYPE_ONAIR_USB2 4 +#endif struct usb_device_id pvr2_device_table[] = { [PVR2_HDW_TYPE_29XXX] = { USB_DEVICE(0x2040, 0x2900) }, [PVR2_HDW_TYPE_24XXX] = { USB_DEVICE(0x2040, 0x2400) }, [PVR2_HDW_TYPE_GOTVIEW_2] = { USB_DEVICE(0x1164, 0x0622) }, +#ifdef CONFIG_VIDEO_PVRUSB2_ONAIR_CREATOR + [PVR2_HDW_TYPE_ONAIR_CREATOR] = { USB_DEVICE(0x11ba, 0x1003) }, +#endif +#ifdef CONFIG_VIDEO_PVRUSB2_ONAIR_USB2 + [PVR2_HDW_TYPE_ONAIR_USB2] = { USB_DEVICE(0x11ba, 0x1001) }, +#endif { } }; +#if defined(CONFIG_VIDEO_PVRUSB2_ONAIR_CREATOR) || defined(CONFIG_VIDEO_PVRUSB2_ONAIR_USB2) + +/* Names of other client modules to request for Creator model hardware */ +static const char *pvr2_client_onair[] = { + "saa7115", + "tuner", + "cs53l32a", +}; +#endif /* Names of other client modules to request for 24xxx model hardware */ static const char *pvr2_client_24xxx[] = { @@ -108,6 +129,26 @@ const struct pvr2_device_desc pvr2_device_descriptions[] = { .default_tuner_type = TUNER_PHILIPS_FM1216ME_MK3, .signal_routing_scheme = PVR2_ROUTING_SCHEME_GOTVIEW, }, +#ifdef CONFIG_VIDEO_PVRUSB2_ONAIR_CREATOR + [PVR2_HDW_TYPE_ONAIR_CREATOR] = { + .description = "OnAir Creator Hybrid USB tuner", + .shortname = "oac", + .client_modules.lst = pvr2_client_onair, + .client_modules.cnt = ARRAY_SIZE(pvr2_client_onair), + .default_tuner_type = TUNER_LG_TDVS_H06XF, + .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, + }, +#endif +#ifdef CONFIG_VIDEO_PVRUSB2_ONAIR_USB2 + [PVR2_HDW_TYPE_ONAIR_USB2] = { + .description = "OnAir USB2 Hybrid USB tuner", + .shortname = "oa2", + .client_modules.lst = pvr2_client_onair, + .client_modules.cnt = ARRAY_SIZE(pvr2_client_onair), + .default_tuner_type = TUNER_PHILIPS_ATSC, + .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, + }, +#endif }; const unsigned int pvr2_device_count = ARRAY_SIZE(pvr2_device_descriptions); -- cgit v1.2.3-59-g8ed1b From 5edfded4811175283c745c9309c9315b721cf674 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Sat, 8 Dec 2007 17:15:55 -0300 Subject: V4L/DVB (6770): pvrusb2: Device CONFIG flags for OnAir device support Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/Kconfig | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/drivers/media/video/pvrusb2/Kconfig b/drivers/media/video/pvrusb2/Kconfig index d0c2cd785430..e8e231d8446d 100644 --- a/drivers/media/video/pvrusb2/Kconfig +++ b/drivers/media/video/pvrusb2/Kconfig @@ -12,6 +12,32 @@ config VIDEO_PVRUSB2 To compile this driver as a module, choose M here: the module will be called pvrusb2 +config VIDEO_PVRUSB2_ONAIR_CREATOR + bool "pvrusb2 driver support for OnAir Creator model" + depends on VIDEO_PVRUSB2 && EXPERIMENTAL + select VIDEO_SAA711X + select VIDEO_CS53L32A + ---help--- + + This option enables support for the OnAir Creator USB tuner + device. This is a hybrid device, however currently only + analog mode is supported. + + If you are in doubt, say Y. + +config VIDEO_PVRUSB2_ONAIR_USB2 + bool "pvrusb2 driver support for OnAir USB2 model" + depends on VIDEO_PVRUSB2 && EXPERIMENTAL + select VIDEO_SAA711X + select VIDEO_CS53L32A + ---help--- + + This option enables support for the OnAir USB2 tuner device + (also known as the Sasem tuner). This is a hybrid device, + however currently only analog mode is supported. + + If you are in doubt, say Y. + config VIDEO_PVRUSB2_29XXX bool "Hauppauge WinTV-PVR USB2 support for 29xxx model series" depends on VIDEO_PVRUSB2 && EXPERIMENTAL -- cgit v1.2.3-59-g8ed1b From 577e4023df8e6111bf7c63d182acc967af060054 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Sat, 8 Dec 2007 17:17:09 -0300 Subject: V4L/DVB (6771): pvrusb2: Remove old obsolete CONFIG flags for pvrusb2 driver Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/Kconfig | 29 ----------------------------- 1 file changed, 29 deletions(-) diff --git a/drivers/media/video/pvrusb2/Kconfig b/drivers/media/video/pvrusb2/Kconfig index e8e231d8446d..95e4396011c1 100644 --- a/drivers/media/video/pvrusb2/Kconfig +++ b/drivers/media/video/pvrusb2/Kconfig @@ -38,35 +38,6 @@ config VIDEO_PVRUSB2_ONAIR_USB2 If you are in doubt, say Y. -config VIDEO_PVRUSB2_29XXX - bool "Hauppauge WinTV-PVR USB2 support for 29xxx model series" - depends on VIDEO_PVRUSB2 && EXPERIMENTAL - select VIDEO_SAA711X - select VIDEO_MSP3400 - ---help--- - This option enables support for WinTV-PVR USB2 devices whose - model number is of the form "29xxx" (leading prefix of "29" - followed by 3 digits). - To see if you may need this option, examine the white - sticker on the underside of your device. - - If you are in doubt, say Y. - -config VIDEO_PVRUSB2_24XXX - bool "Hauppauge WinTV-PVR USB2 support for 24xxx model series" - depends on VIDEO_PVRUSB2 && EXPERIMENTAL - select VIDEO_CX25840 - select VIDEO_WM8775 - ---help--- - This option enables inclusion of additional logic to operate - newer WinTV-PVR USB2 devices whose model number is of the - form "24xxx" (leading prefix of "24" followed by 3 digits). - To see if you may need this option, examine the white - sticker on the underside of your device. Enabling this - option will not harm support for older devices. - - If you are in doubt, say Y. - config VIDEO_PVRUSB2_SYSFS bool "pvrusb2 sysfs support (EXPERIMENTAL)" default y -- cgit v1.2.3-59-g8ed1b From 066bba2d1ccdac2005a64f4c87f8b542744ed94c Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Sat, 8 Dec 2007 17:17:44 -0300 Subject: V4L/DVB (6772): pvrusb2: Remove obsolete (and misleading) comment Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-main.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/media/video/pvrusb2/pvrusb2-main.c b/drivers/media/video/pvrusb2/pvrusb2-main.c index a8370737b503..b63b2265503a 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-main.c +++ b/drivers/media/video/pvrusb2/pvrusb2-main.c @@ -149,11 +149,6 @@ static void __exit pvr_exit(void) module_init(pvr_init); module_exit(pvr_exit); -/* Mike Isely 11-Mar-2006: See pvrusb2-hdw.c for - MODULE_DEVICE_TABLE(). We have to declare that attribute there - because that's where the device table actually is now and it seems - that certain gcc configurations get angry if MODULE_DEVICE_TABLE() - is used on what ends up being an external symbol. */ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); -- cgit v1.2.3-59-g8ed1b From d130fa8a05ee5f39c786df02dd75d1eebb12633b Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Sat, 8 Dec 2007 17:20:06 -0300 Subject: V4L/DVB (6773): pvrusb2: rework device descriptor layout The pvrusb2 driver tries to keep all device specific attributes in a single data structure in one source file. This change further cleans up how that table is set up. We now try to group everything together for each specific device, and the number of symbols exported from this module has now been reduced to a single global. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-devattr.c | 155 +++++++++++++++----------- drivers/media/video/pvrusb2/pvrusb2-devattr.h | 2 - drivers/media/video/pvrusb2/pvrusb2-hdw.c | 9 +- 3 files changed, 89 insertions(+), 77 deletions(-) diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c index 2d6519d20f07..9a08670d406f 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c +++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c @@ -33,71 +33,22 @@ pvr2_device_desc structures. #include #include -/* Known major hardware variants, keyed from device ID */ -#define PVR2_HDW_TYPE_29XXX 0 -#define PVR2_HDW_TYPE_24XXX 1 -#define PVR2_HDW_TYPE_GOTVIEW_2 2 -#ifdef CONFIG_VIDEO_PVRUSB2_ONAIR_CREATOR -#define PVR2_HDW_TYPE_ONAIR_CREATOR 3 -#endif -#ifdef CONFIG_VIDEO_PVRUSB2_ONAIR_USB2 -#define PVR2_HDW_TYPE_ONAIR_USB2 4 -#endif - -struct usb_device_id pvr2_device_table[] = { - [PVR2_HDW_TYPE_29XXX] = { USB_DEVICE(0x2040, 0x2900) }, - [PVR2_HDW_TYPE_24XXX] = { USB_DEVICE(0x2040, 0x2400) }, - [PVR2_HDW_TYPE_GOTVIEW_2] = { USB_DEVICE(0x1164, 0x0622) }, -#ifdef CONFIG_VIDEO_PVRUSB2_ONAIR_CREATOR - [PVR2_HDW_TYPE_ONAIR_CREATOR] = { USB_DEVICE(0x11ba, 0x1003) }, -#endif -#ifdef CONFIG_VIDEO_PVRUSB2_ONAIR_USB2 - [PVR2_HDW_TYPE_ONAIR_USB2] = { USB_DEVICE(0x11ba, 0x1001) }, -#endif - { } -}; -#if defined(CONFIG_VIDEO_PVRUSB2_ONAIR_CREATOR) || defined(CONFIG_VIDEO_PVRUSB2_ONAIR_USB2) -/* Names of other client modules to request for Creator model hardware */ -static const char *pvr2_client_onair[] = { - "saa7115", - "tuner", - "cs53l32a", -}; -#endif -/* Names of other client modules to request for 24xxx model hardware */ -static const char *pvr2_client_24xxx[] = { - "cx25840", - "tuner", - "wm8775", -}; +/*------------------------------------------------------------------------*/ +/* Hauppauge PVR-USB2 Model 29xxx */ -/* Names of other client modules to request for 29xxx model hardware */ static const char *pvr2_client_29xxx[] = { "msp3400", "saa7115", "tuner", }; -// Names of other client modules to request for Gotview 2 model hardware -static const char *pvr2_client_gotview_2[] = { - "cx25840", - "tuner", -}; - -/* Firmware file name(s) for 29xxx devices */ static const char *pvr2_fw1_names_29xxx[] = { "v4l-pvrusb2-29xxx-01.fw", }; -/* Firmware file name(s) for 24xxx devices */ -static const char *pvr2_fw1_names_24xxx[] = { - "v4l-pvrusb2-24xxx-01.fw", -}; - -const struct pvr2_device_desc pvr2_device_descriptions[] = { - [PVR2_HDW_TYPE_29XXX] = { +static const struct pvr2_device_desc pvr2_device_29xxx = { .description = "WinTV PVR USB2 Model Category 29xxxx", .shortname = "29xxx", .client_modules.lst = pvr2_client_29xxx, @@ -106,8 +57,24 @@ const struct pvr2_device_desc pvr2_device_descriptions[] = { .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_29xxx), .flag_has_hauppauge_rom = !0, .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, - }, - [PVR2_HDW_TYPE_24XXX] = { +}; + + + +/*------------------------------------------------------------------------*/ +/* Hauppauge PVR-USB2 Model 24xxx */ + +static const char *pvr2_client_24xxx[] = { + "cx25840", + "tuner", + "wm8775", +}; + +static const char *pvr2_fw1_names_24xxx[] = { + "v4l-pvrusb2-24xxx-01.fw", +}; + +static const struct pvr2_device_desc pvr2_device_24xxx = { .description = "WinTV PVR USB2 Model Category 24xxxx", .shortname = "24xxx", .client_modules.lst = pvr2_client_24xxx, @@ -119,8 +86,19 @@ const struct pvr2_device_desc pvr2_device_descriptions[] = { .flag_has_hauppauge_rom = !0, .flag_has_hauppauge_custom_ir = !0, .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, - }, - [PVR2_HDW_TYPE_GOTVIEW_2] = { +}; + + + +/*------------------------------------------------------------------------*/ +/* GOTVIEW USB2.0 DVD2 */ + +static const char *pvr2_client_gotview_2[] = { + "cx25840", + "tuner", +}; + +static const struct pvr2_device_desc pvr2_device_gotview_2 = { .description = "Gotview USB 2.0 DVD 2", .shortname = "gv2", .client_modules.lst = pvr2_client_gotview_2, @@ -128,30 +106,73 @@ const struct pvr2_device_desc pvr2_device_descriptions[] = { .flag_has_cx25840 = !0, .default_tuner_type = TUNER_PHILIPS_FM1216ME_MK3, .signal_routing_scheme = PVR2_ROUTING_SCHEME_GOTVIEW, - }, +}; + + + #ifdef CONFIG_VIDEO_PVRUSB2_ONAIR_CREATOR - [PVR2_HDW_TYPE_ONAIR_CREATOR] = { +/*------------------------------------------------------------------------*/ +/* OnAir Creator */ + +static const char *pvr2_client_onair_creator[] = { + "saa7115", + "tuner", + "cs53l32a", +}; + +static const struct pvr2_device_desc pvr2_device_onair_creator = { .description = "OnAir Creator Hybrid USB tuner", .shortname = "oac", - .client_modules.lst = pvr2_client_onair, - .client_modules.cnt = ARRAY_SIZE(pvr2_client_onair), + .client_modules.lst = pvr2_client_onair_creator, + .client_modules.cnt = ARRAY_SIZE(pvr2_client_onair_creator), .default_tuner_type = TUNER_LG_TDVS_H06XF, .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, - }, +}; #endif + + + #ifdef CONFIG_VIDEO_PVRUSB2_ONAIR_USB2 - [PVR2_HDW_TYPE_ONAIR_USB2] = { +/*------------------------------------------------------------------------*/ +/* OnAir USB 2.0 */ + +static const char *pvr2_client_onair_usb2[] = { + "saa7115", + "tuner", + "cs53l32a", +}; + +static const struct pvr2_device_desc pvr2_device_onair_usb2 = { .description = "OnAir USB2 Hybrid USB tuner", .shortname = "oa2", - .client_modules.lst = pvr2_client_onair, - .client_modules.cnt = ARRAY_SIZE(pvr2_client_onair), + .client_modules.lst = pvr2_client_onair_usb2, + .client_modules.cnt = ARRAY_SIZE(pvr2_client_onair_usb2), .default_tuner_type = TUNER_PHILIPS_ATSC, .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, - }, -#endif }; +#endif + + -const unsigned int pvr2_device_count = ARRAY_SIZE(pvr2_device_descriptions); +/*------------------------------------------------------------------------*/ + +struct usb_device_id pvr2_device_table[] = { + { USB_DEVICE(0x2040, 0x2900), + .driver_info = (kernel_ulong_t)&pvr2_device_29xxx}, + { USB_DEVICE(0x2040, 0x2400), + .driver_info = (kernel_ulong_t)&pvr2_device_24xxx}, + { USB_DEVICE(0x1164, 0x0622), + .driver_info = (kernel_ulong_t)&pvr2_device_gotview_2}, +#ifdef CONFIG_VIDEO_PVRUSB2_ONAIR_CREATOR + { USB_DEVICE(0x11ba, 0x1003), + .driver_info = (kernel_ulong_t)&pvr2_device_onair_creator}, +#endif +#ifdef CONFIG_VIDEO_PVRUSB2_ONAIR_USB2 + { USB_DEVICE(0x11ba, 0x1001), + .driver_info = (kernel_ulong_t)&pvr2_device_onair_usb2}, +#endif + { } +}; MODULE_DEVICE_TABLE(usb, pvr2_device_table); diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.h b/drivers/media/video/pvrusb2/pvrusb2-devattr.h index a9c3d99b602d..64b467f0637f 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-devattr.h +++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.h @@ -104,9 +104,7 @@ struct pvr2_device_desc { char flag_has_hauppauge_custom_ir; }; -extern const struct pvr2_device_desc pvr2_device_descriptions[]; extern struct usb_device_id pvr2_device_table[]; -extern const unsigned int pvr2_device_count; #endif /* __PVRUSB2_HDW_INTERNAL_H */ diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index 54d2c4ab7a31..41ae980405ed 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -1813,7 +1813,6 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, { unsigned int idx,cnt1,cnt2; struct pvr2_hdw *hdw; - unsigned int hdw_type; int valid_std_mask; struct pvr2_ctrl *cptr; const struct pvr2_device_desc *hdw_desc; @@ -1821,13 +1820,7 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, struct v4l2_queryctrl qctrl; struct pvr2_ctl_info *ciptr; - hdw_type = devid - pvr2_device_table; - if (hdw_type >= pvr2_device_count) { - pvr2_trace(PVR2_TRACE_ERROR_LEGS, - "Bogus device type of %u reported",hdw_type); - return NULL; - } - hdw_desc = pvr2_device_descriptions + hdw_type; + hdw_desc = (const struct pvr2_device_desc *)(devid->driver_info); hdw = kzalloc(sizeof(*hdw),GFP_KERNEL); pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_create: hdw=%p, type \"%s\"", -- cgit v1.2.3-59-g8ed1b From 14d5deba2737c59444e805c10764d58a3d73e9b2 Mon Sep 17 00:00:00 2001 From: Richard Knutsson Date: Sat, 8 Dec 2007 10:35:06 -0300 Subject: V4L/DVB (6776): ivtv: Some general fixes Fix "warning: Using plain integer as NULL pointer". Convert 'x < y ? x : y' to use min() instead. Signed-off-by: Richard Knutsson Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-driver.c | 2 +- drivers/media/video/ivtv/ivtv-ioctl.c | 2 +- drivers/media/video/ivtv/ivtv-irq.c | 4 ++-- drivers/media/video/ivtv/ivtv-streams.c | 4 ++-- drivers/media/video/ivtv/ivtvfb.c | 2 +- 5 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index 4994dc59d40c..2765624b230f 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -983,7 +983,7 @@ static int __devinit ivtv_probe(struct pci_dev *dev, } itv = kzalloc(sizeof(struct ivtv), GFP_ATOMIC); - if (itv == 0) { + if (itv == NULL) { spin_unlock(&ivtv_cards_lock); return -ENOMEM; } diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index 25b68843a289..edef2a579617 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -698,7 +698,7 @@ static int ivtv_debug_ioctls(struct file *filp, unsigned int cmd, void *arg) ivtv_reset_ir_gpio(itv); } if (val & 0x02) { - itv->video_dec_func(itv, cmd, 0); + itv->video_dec_func(itv, cmd, NULL); } break; } diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c index c5ea54e65272..65604dde9726 100644 --- a/drivers/media/video/ivtv/ivtv-irq.c +++ b/drivers/media/video/ivtv/ivtv-irq.c @@ -204,7 +204,7 @@ static int stream_enc_dma_append(struct ivtv_stream *s, u32 data[CX2341X_MBOX_MA s->sg_pending[idx].dst = buf->dma_handle; s->sg_pending[idx].src = offset; s->sg_pending[idx].size = s->buf_size; - buf->bytesused = (size < s->buf_size) ? size : s->buf_size; + buf->bytesused = min(size, s->buf_size); buf->dma_xfer_cnt = s->dma_xfer_cnt; s->q_predma.bytesused += buf->bytesused; @@ -736,7 +736,7 @@ static void ivtv_irq_dec_data_req(struct ivtv *itv) s = &itv->streams[IVTV_DEC_STREAM_TYPE_YUV]; } else { - itv->dma_data_req_size = data[2] >= 0x10000 ? 0x10000 : data[2]; + itv->dma_data_req_size = min_t(u32, data[2], 0x10000); itv->dma_data_req_offset = data[1]; s = &itv->streams[IVTV_DEC_STREAM_TYPE_MPG]; } diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c index 3ca2a1a62a71..24d98ecf35ad 100644 --- a/drivers/media/video/ivtv/ivtv-streams.c +++ b/drivers/media/video/ivtv/ivtv-streams.c @@ -572,10 +572,10 @@ int ivtv_start_v4l2_encode_stream(struct ivtv_stream *s) clear_bit(IVTV_F_I_EOS, &itv->i_flags); /* Initialize Digitizer for Capture */ - itv->video_dec_func(itv, VIDIOC_STREAMOFF, 0); + itv->video_dec_func(itv, VIDIOC_STREAMOFF, NULL); ivtv_msleep_timeout(300, 1); ivtv_vapi(itv, CX2341X_ENC_INITIALIZE_INPUT, 0); - itv->video_dec_func(itv, VIDIOC_STREAMON, 0); + itv->video_dec_func(itv, VIDIOC_STREAMON, NULL); } /* begin_capture */ diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c index 1a73038ea811..3b23fc05f7c4 100644 --- a/drivers/media/video/ivtv/ivtvfb.c +++ b/drivers/media/video/ivtv/ivtvfb.c @@ -1057,7 +1057,7 @@ static int ivtvfb_init_card(struct ivtv *itv) } itv->osd_info = kzalloc(sizeof(struct osd_info), GFP_ATOMIC); - if (itv->osd_info == 0) { + if (itv->osd_info == NULL) { IVTVFB_ERR("Failed to allocate memory for osd_info\n"); return -ENOMEM; } -- cgit v1.2.3-59-g8ed1b From 6881647cce09931f3d787ab83b5250436427ceb9 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 8 Dec 2007 16:25:41 -0300 Subject: V4L/DVB (6782): tda8290: access frontend structure directly, where possible Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tda8290.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/media/video/tda8290.c b/drivers/media/video/tda8290.c index 09efb6a60dbc..d5517bcf6ffe 100644 --- a/drivers/media/video/tda8290.c +++ b/drivers/media/video/tda8290.c @@ -587,7 +587,7 @@ static int tda829x_find_tuner(struct dvb_frontend *fe) if (data == 0x83) { priv->ver |= TDA18271; - tda18271_attach(&t->fe, priv->tda827x_addr, + tda18271_attach(fe, priv->tda827x_addr, priv->i2c_props.adap); } else { if ((data & 0x3c) == 0) @@ -595,14 +595,14 @@ static int tda829x_find_tuner(struct dvb_frontend *fe) else priv->ver |= TDA8275A; - tda827x_attach(&t->fe, priv->tda827x_addr, + tda827x_attach(fe, priv->tda827x_addr, priv->i2c_props.adap, &priv->cfg); } - if (t->fe.ops.tuner_ops.init) - t->fe.ops.tuner_ops.init(&t->fe); + if (fe->ops.tuner_ops.init) + fe->ops.tuner_ops.init(fe); - if (t->fe.ops.tuner_ops.sleep) - t->fe.ops.tuner_ops.sleep(&t->fe); + if (fe->ops.tuner_ops.sleep) + fe->ops.tuner_ops.sleep(fe); ops->i2c_gate_ctrl(fe, 0); -- cgit v1.2.3-59-g8ed1b From c7919d520f4c9a064ae14bc4dd170c4c12ead2af Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 8 Dec 2007 17:06:30 -0300 Subject: V4L/DVB (6783): tuner: combine set_tv_freq and set_radio_freq into a single set_params method We can tell whether we are tuning television or radio by testing for struct analog_parameters *params->mode == V4L2_TUNER_RADIO There is no longer any need for separate set_tv_freq and set_radio_freq functions in the analog tuner demodulator modules. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tda8290.c | 53 ++++++++++++++------------------------ drivers/media/video/tda9887.c | 6 ++--- drivers/media/video/tuner-core.c | 41 +++++++++++++++++------------ drivers/media/video/tuner-driver.h | 4 +-- 4 files changed, 49 insertions(+), 55 deletions(-) diff --git a/drivers/media/video/tda8290.c b/drivers/media/video/tda8290.c index d5517bcf6ffe..245b202560b5 100644 --- a/drivers/media/video/tda8290.c +++ b/drivers/media/video/tda8290.c @@ -110,31 +110,32 @@ static int tda8295_i2c_bridge(struct dvb_frontend *fe, int close) /*---------------------------------------------------------------------*/ -static void set_audio(struct dvb_frontend *fe) +static void set_audio(struct dvb_frontend *fe, + struct analog_parameters *params) { struct tda8290_priv *priv = fe->analog_demod_priv; struct tuner *t = priv->t; char* mode; - if (t->std & V4L2_STD_MN) { + if (params->std & V4L2_STD_MN) { priv->tda8290_easy_mode = 0x01; mode = "MN"; - } else if (t->std & V4L2_STD_B) { + } else if (params->std & V4L2_STD_B) { priv->tda8290_easy_mode = 0x02; mode = "B"; - } else if (t->std & V4L2_STD_GH) { + } else if (params->std & V4L2_STD_GH) { priv->tda8290_easy_mode = 0x04; mode = "GH"; - } else if (t->std & V4L2_STD_PAL_I) { + } else if (params->std & V4L2_STD_PAL_I) { priv->tda8290_easy_mode = 0x08; mode = "I"; - } else if (t->std & V4L2_STD_DK) { + } else if (params->std & V4L2_STD_DK) { priv->tda8290_easy_mode = 0x10; mode = "DK"; - } else if (t->std & V4L2_STD_SECAM_L) { + } else if (params->std & V4L2_STD_SECAM_L) { priv->tda8290_easy_mode = 0x20; mode = "L"; - } else if (t->std & V4L2_STD_SECAM_LC) { + } else if (params->std & V4L2_STD_SECAM_LC) { priv->tda8290_easy_mode = 0x40; mode = "LC"; } else { @@ -145,7 +146,8 @@ static void set_audio(struct dvb_frontend *fe) tuner_dbg("setting tda829x to system %s\n", mode); } -static void tda8290_set_freq(struct dvb_frontend *fe, unsigned int freq) +static void tda8290_set_params(struct dvb_frontend *fe, + struct analog_parameters *params) { struct tda8290_priv *priv = fe->analog_demod_priv; struct tuner *t = priv->t; @@ -172,14 +174,7 @@ static void tda8290_set_freq(struct dvb_frontend *fe, unsigned int freq) pll_stat; int i; - struct analog_parameters params = { - .frequency = freq, - .mode = t->mode, - .audmode = t->audmode, - .std = t->std - }; - - set_audio(fe); + set_audio(fe, params); tuner_dbg("tda827xa config is 0x%02x\n", t->config); tuner_i2c_xfer_send(&priv->i2c_props, easy_mode, 2); @@ -200,7 +195,7 @@ static void tda8290_set_freq(struct dvb_frontend *fe, unsigned int freq) tda8290_i2c_bridge(fe, 1); if (fe->ops.tuner_ops.set_analog_params) - fe->ops.tuner_ops.set_analog_params(fe, ¶ms); + fe->ops.tuner_ops.set_analog_params(fe, params); for (i = 0; i < 3; i++) { tuner_i2c_xfer_send(&priv->i2c_props, &addr_pll_stat, 1); @@ -363,23 +358,17 @@ static int tda8295_has_signal(struct dvb_frontend *fe) /*---------------------------------------------------------------------*/ -static void tda8295_set_freq(struct dvb_frontend *fe, unsigned int freq) +static void tda8295_set_params(struct dvb_frontend *fe, + struct analog_parameters *params) { struct tda8290_priv *priv = fe->analog_demod_priv; struct tuner *t = priv->t; unsigned char blanking_mode[] = { 0x1d, 0x00 }; - struct analog_parameters params = { - .frequency = freq, - .mode = t->mode, - .audmode = t->audmode, - .std = t->std - }; - - set_audio(fe); + set_audio(fe, params); - tuner_dbg("%s: freq = %d\n", __FUNCTION__, freq); + tuner_dbg("%s: freq = %d\n", __FUNCTION__, params->frequency); tda8295_power(fe, 1); tda8295_agc1_out(fe, 1); @@ -396,7 +385,7 @@ static void tda8295_set_freq(struct dvb_frontend *fe, unsigned int freq) tda8295_i2c_bridge(fe, 1); if (fe->ops.tuner_ops.set_analog_params) - fe->ops.tuner_ops.set_analog_params(fe, ¶ms); + fe->ops.tuner_ops.set_analog_params(fe, params); if (priv->cfg.agcf) priv->cfg.agcf(fe); @@ -673,8 +662,7 @@ static int tda8295_probe(struct tuner_i2c_props *i2c_props) } static struct analog_tuner_ops tda8290_tuner_ops = { - .set_tv_freq = tda8290_set_freq, - .set_radio_freq = tda8290_set_freq, + .set_params = tda8290_set_params, .has_signal = tda8290_has_signal, .standby = tda8290_standby, .release = tda829x_release, @@ -682,8 +670,7 @@ static struct analog_tuner_ops tda8290_tuner_ops = { }; static struct analog_tuner_ops tda8295_tuner_ops = { - .set_tv_freq = tda8295_set_freq, - .set_radio_freq = tda8295_set_freq, + .set_params = tda8295_set_params, .has_signal = tda8295_has_signal, .standby = tda8295_standby, .release = tda829x_release, diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c index dfa2964d7ef3..d506d4bf8253 100644 --- a/drivers/media/video/tda9887.c +++ b/drivers/media/video/tda9887.c @@ -622,7 +622,8 @@ static void tda9887_standby(struct dvb_frontend *fe) tda9887_configure(fe); } -static void tda9887_set_freq(struct dvb_frontend *fe, unsigned int freq) +static void tda9887_set_params(struct dvb_frontend *fe, + struct analog_parameters *params) { tda9887_configure(fe); } @@ -634,8 +635,7 @@ static void tda9887_release(struct dvb_frontend *fe) } static struct analog_tuner_ops tda9887_tuner_ops = { - .set_tv_freq = tda9887_set_freq, - .set_radio_freq = tda9887_set_freq, + .set_params = tda9887_set_params, .standby = tda9887_standby, .tuner_status = tda9887_tuner_status, .get_afc = tda9887_get_afc, diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index e56a41941489..5f8bffc8209b 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -78,23 +78,17 @@ MODULE_LICENSE("GPL"); /* ---------------------------------------------------------------------- */ -static void fe_set_freq(struct dvb_frontend *fe, unsigned int freq) +static void fe_set_params(struct dvb_frontend *fe, + struct analog_parameters *params) { struct dvb_tuner_ops *fe_tuner_ops = &fe->ops.tuner_ops; struct tuner *t = fe->analog_demod_priv; - struct analog_parameters params = { - .frequency = freq, - .mode = t->mode, - .audmode = t->audmode, - .std = t->std - }; - if (NULL == fe_tuner_ops->set_analog_params) { tuner_warn("Tuner frontend module has no way to set freq\n"); return; } - fe_tuner_ops->set_analog_params(fe, ¶ms); + fe_tuner_ops->set_analog_params(fe, params); } static void fe_release(struct dvb_frontend *fe) @@ -136,8 +130,7 @@ static int fe_has_signal(struct dvb_frontend *fe) static void tuner_status(struct dvb_frontend *fe); static struct analog_tuner_ops tuner_core_ops = { - .set_tv_freq = fe_set_freq, - .set_radio_freq = fe_set_freq, + .set_params = fe_set_params, .standby = fe_standby, .release = fe_release, .has_signal = fe_has_signal, @@ -150,11 +143,17 @@ static void set_tv_freq(struct i2c_client *c, unsigned int freq) struct tuner *t = i2c_get_clientdata(c); struct analog_tuner_ops *ops = t->fe.ops.analog_demod_ops; + struct analog_parameters params = { + .mode = t->mode, + .audmode = t->audmode, + .std = t->std + }; + if (t->type == UNSET) { tuner_warn ("tuner type not set\n"); return; } - if ((NULL == ops) || (NULL == ops->set_tv_freq)) { + if ((NULL == ops) || (NULL == ops->set_params)) { tuner_warn ("Tuner has no way to set tv freq\n"); return; } @@ -169,7 +168,9 @@ static void set_tv_freq(struct i2c_client *c, unsigned int freq) else freq = tv_range[1] * 16; } - ops->set_tv_freq(&t->fe, freq); + params.frequency = freq; + + ops->set_params(&t->fe, ¶ms); } static void set_radio_freq(struct i2c_client *c, unsigned int freq) @@ -177,11 +178,17 @@ static void set_radio_freq(struct i2c_client *c, unsigned int freq) struct tuner *t = i2c_get_clientdata(c); struct analog_tuner_ops *ops = t->fe.ops.analog_demod_ops; + struct analog_parameters params = { + .mode = t->mode, + .audmode = t->audmode, + .std = t->std + }; + if (t->type == UNSET) { tuner_warn ("tuner type not set\n"); return; } - if ((NULL == ops) || (NULL == ops->set_radio_freq)) { + if ((NULL == ops) || (NULL == ops->set_params)) { tuner_warn ("tuner has no way to set radio frequency\n"); return; } @@ -196,8 +203,9 @@ static void set_radio_freq(struct i2c_client *c, unsigned int freq) else freq = radio_range[1] * 16000; } + params.frequency = freq; - ops->set_radio_freq(&t->fe, freq); + ops->set_params(&t->fe, ¶ms); } static void set_freq(struct i2c_client *c, unsigned long freq) @@ -359,8 +367,7 @@ static void set_type(struct i2c_client *c, unsigned int type, ops = t->fe.ops.analog_demod_ops; - if (((NULL == ops) || - ((NULL == ops->set_tv_freq) && (NULL == ops->set_radio_freq))) && + if (((NULL == ops) || (NULL == ops->set_params)) && (fe_tuner_ops->set_analog_params)) { strlcpy(t->i2c->name, fe_tuner_ops->info.name, sizeof(t->i2c->name)); diff --git a/drivers/media/video/tuner-driver.h b/drivers/media/video/tuner-driver.h index a4db32d97a12..91913ee08a07 100644 --- a/drivers/media/video/tuner-driver.h +++ b/drivers/media/video/tuner-driver.h @@ -32,8 +32,8 @@ extern unsigned const int tuner_count; struct tuner; struct analog_tuner_ops { - void (*set_tv_freq)(struct dvb_frontend *fe, unsigned int freq); - void (*set_radio_freq)(struct dvb_frontend *fe, unsigned int freq); + void (*set_params)(struct dvb_frontend *fe, + struct analog_parameters *params); int (*has_signal)(struct dvb_frontend *fe); int (*is_stereo)(struct dvb_frontend *fe); int (*get_afc)(struct dvb_frontend *fe); -- cgit v1.2.3-59-g8ed1b From fa746aee336fedfe25e6945e5967399966948420 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 9 Dec 2007 05:16:10 -0300 Subject: V4L/DVB (6784): tda8290: prevent possible memory leak Always call tda829x_release if tda829x_attach fails for a reason other than failure to allocate memory for private structure. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tda8290.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/tda8290.c b/drivers/media/video/tda8290.c index 245b202560b5..a39cb1f9e875 100644 --- a/drivers/media/video/tda8290.c +++ b/drivers/media/video/tda8290.c @@ -704,7 +704,7 @@ int tda829x_attach(struct tuner *t) } if (tda829x_find_tuner(fe) < 0) - return -EINVAL; + goto fail; if (priv->ver & TDA8290) { tda8290_init_tuner(fe); @@ -717,6 +717,11 @@ int tda829x_attach(struct tuner *t) t->mode = V4L2_TUNER_ANALOG_TV; return 0; + +fail: + tda829x_release(fe); + fe->ops.analog_demod_ops = NULL; + return -EINVAL; } EXPORT_SYMBOL_GPL(tda829x_attach); -- cgit v1.2.3-59-g8ed1b From ab1660503ac3af7febfcf987648509b484d4feda Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 9 Dec 2007 02:26:48 -0300 Subject: V4L/DVB (6785): tda8290: remove dependency on struct tuner - remove dependency of tda8290 module on struct tuner - move tuner_foo printk macros from tuner-driver.h into tuner-core.c - clean up #includes of tuner-i2c.h / tuner-driver.h Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tda8290.c | 103 ++++++++++++++++++------------------- drivers/media/video/tda8290.h | 24 ++++++--- drivers/media/video/tda9887.c | 1 + drivers/media/video/tuner-core.c | 43 ++++++++++++++-- drivers/media/video/tuner-driver.h | 27 ---------- drivers/media/video/tuner-i2c.h | 2 - include/media/tuner.h | 2 - 7 files changed, 109 insertions(+), 93 deletions(-) diff --git a/drivers/media/video/tda8290.c b/drivers/media/video/tda8290.c index a39cb1f9e875..d0d13bc61250 100644 --- a/drivers/media/video/tda8290.c +++ b/drivers/media/video/tda8290.c @@ -23,12 +23,14 @@ #include #include #include +#include "tuner-driver.h" +#include "tuner-i2c.h" #include "tda8290.h" #include "tda827x.h" #include "tda18271.h" -static int tuner_debug; -module_param_named(debug, tuner_debug, int, 0644); +static int debug; +module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "enable verbose debug messages"); #define PREFIX "tda8290" @@ -50,8 +52,6 @@ struct tda8290_priv { #define TDA18271 16 struct tda827x_config cfg; - - struct tuner *t; }; /*---------------------------------------------------------------------*/ @@ -114,7 +114,6 @@ static void set_audio(struct dvb_frontend *fe, struct analog_parameters *params) { struct tda8290_priv *priv = fe->analog_demod_priv; - struct tuner *t = priv->t; char* mode; if (params->std & V4L2_STD_MN) { @@ -150,7 +149,6 @@ static void tda8290_set_params(struct dvb_frontend *fe, struct analog_parameters *params) { struct tda8290_priv *priv = fe->analog_demod_priv; - struct tuner *t = priv->t; unsigned char soft_reset[] = { 0x00, 0x00 }; unsigned char easy_mode[] = { 0x01, priv->tda8290_easy_mode }; @@ -176,7 +174,8 @@ static void tda8290_set_params(struct dvb_frontend *fe, set_audio(fe, params); - tuner_dbg("tda827xa config is 0x%02x\n", t->config); + if (priv->cfg.config) + tuner_dbg("tda827xa config is 0x%02x\n", *priv->cfg.config); tuner_i2c_xfer_send(&priv->i2c_props, easy_mode, 2); tuner_i2c_xfer_send(&priv->i2c_props, agc_out_on, 2); tuner_i2c_xfer_send(&priv->i2c_props, soft_reset, 2); @@ -362,7 +361,6 @@ static void tda8295_set_params(struct dvb_frontend *fe, struct analog_parameters *params) { struct tda8290_priv *priv = fe->analog_demod_priv; - struct tuner *t = priv->t; unsigned char blanking_mode[] = { 0x1d, 0x00 }; @@ -442,13 +440,13 @@ static void tda8295_standby(struct dvb_frontend *fe) static void tda8290_init_if(struct dvb_frontend *fe) { struct tda8290_priv *priv = fe->analog_demod_priv; - struct tuner *t = priv->t; unsigned char set_VS[] = { 0x30, 0x6F }; unsigned char set_GP00_CF[] = { 0x20, 0x01 }; unsigned char set_GP01_CF[] = { 0x20, 0x0B }; - if ((t->config == 1) || (t->config == 2)) + if ((priv->cfg.config) && + ((*priv->cfg.config == 1) || (*priv->cfg.config == 2))) tuner_i2c_xfer_send(&priv->i2c_props, set_GP00_CF, 2); else tuner_i2c_xfer_send(&priv->i2c_props, set_GP01_CF, 2); @@ -516,7 +514,6 @@ static int tda829x_find_tuner(struct dvb_frontend *fe) { struct tda8290_priv *priv = fe->analog_demod_priv; struct analog_tuner_ops *ops = fe->ops.analog_demod_ops; - struct tuner *t = priv->t; int i, ret, tuners_found; u32 tuner_addrs; u8 data; @@ -595,29 +592,6 @@ static int tda829x_find_tuner(struct dvb_frontend *fe) ops->i2c_gate_ctrl(fe, 0); - switch (priv->ver) { - case TDA8290 | TDA8275: - strlcpy(t->i2c->name, "tda8290+75", sizeof(t->i2c->name)); - break; - case TDA8295 | TDA8275: - strlcpy(t->i2c->name, "tda8295+75", sizeof(t->i2c->name)); - break; - case TDA8290 | TDA8275A: - strlcpy(t->i2c->name, "tda8290+75a", sizeof(t->i2c->name)); - break; - case TDA8295 | TDA8275A: - strlcpy(t->i2c->name, "tda8295+75a", sizeof(t->i2c->name)); - break; - case TDA8290 | TDA18271: - strlcpy(t->i2c->name, "tda8290+18271", sizeof(t->i2c->name)); - break; - case TDA8295 | TDA18271: - strlcpy(t->i2c->name, "tda8295+18271", sizeof(t->i2c->name)); - break; - default: - return -EINVAL; - } - return 0; } @@ -631,7 +605,7 @@ static int tda8290_probe(struct tuner_i2c_props *i2c_props) tuner_i2c_xfer_recv(i2c_props, &tda8290_id[1], 1); if (tda8290_id[1] == TDA8290_ID) { - if (tuner_debug) + if (debug) printk(KERN_DEBUG "%s: tda8290 detected @ %d-%04x\n", __FUNCTION__, i2c_adapter_id(i2c_props->adap), i2c_props->addr); @@ -651,7 +625,7 @@ static int tda8295_probe(struct tuner_i2c_props *i2c_props) tuner_i2c_xfer_recv(i2c_props, &tda8295_id[1], 1); if (tda8295_id[1] == TDA8295_ID) { - if (tuner_debug) + if (debug) printk(KERN_DEBUG "%s: tda8295 detected @ %d-%04x\n", __FUNCTION__, i2c_adapter_id(i2c_props->adap), i2c_props->addr); @@ -677,21 +651,24 @@ static struct analog_tuner_ops tda8295_tuner_ops = { .i2c_gate_ctrl = tda8295_i2c_bridge, }; -int tda829x_attach(struct tuner *t) +struct dvb_frontend *tda829x_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c_adap, u8 i2c_addr, + struct tda829x_config *cfg) { - struct dvb_frontend *fe = &t->fe; struct tda8290_priv *priv = NULL; + char *name; priv = kzalloc(sizeof(struct tda8290_priv), GFP_KERNEL); if (priv == NULL) - return -ENOMEM; + return NULL; fe->analog_demod_priv = priv; - priv->i2c_props.addr = t->i2c->addr; - priv->i2c_props.adap = t->i2c->adapter; - priv->cfg.config = &t->config; - priv->cfg.tuner_callback = t->tuner_callback; - priv->t = t; + priv->i2c_props.addr = i2c_addr; + priv->i2c_props.adap = i2c_adap; + if (cfg) { + priv->cfg.config = cfg->lna_cfg; + priv->cfg.tuner_callback = cfg->tuner_callback; + } if (tda8290_probe(&priv->i2c_props) == 0) { priv->ver = TDA8290; @@ -706,30 +683,50 @@ int tda829x_attach(struct tuner *t) if (tda829x_find_tuner(fe) < 0) goto fail; + switch (priv->ver) { + case TDA8290 | TDA8275: + name = "tda8290+75"; + break; + case TDA8295 | TDA8275: + name = "tda8295+75"; + break; + case TDA8290 | TDA8275A: + name = "tda8290+75a"; + break; + case TDA8295 | TDA8275A: + name = "tda8295+75a"; + break; + case TDA8290 | TDA18271: + name = "tda8290+18271"; + break; + case TDA8295 | TDA18271: + name = "tda8295+18271"; + break; + default: + goto fail; + } + tuner_info("type set to %s\n", name); + if (priv->ver & TDA8290) { tda8290_init_tuner(fe); tda8290_init_if(fe); } else if (priv->ver & TDA8295) tda8295_init_if(fe); - tuner_info("type set to %s\n", t->i2c->name); - - t->mode = V4L2_TUNER_ANALOG_TV; - - return 0; + return fe; fail: tda829x_release(fe); fe->ops.analog_demod_ops = NULL; - return -EINVAL; + return NULL; } EXPORT_SYMBOL_GPL(tda829x_attach); -int tda829x_probe(struct tuner *t) +int tda829x_probe(struct i2c_adapter *i2c_adap, u8 i2c_addr) { struct tuner_i2c_props i2c_props = { - .adap = t->i2c->adapter, - .addr = t->i2c->addr + .adap = i2c_adap, + .addr = i2c_addr, }; unsigned char soft_reset[] = { 0x00, 0x00 }; diff --git a/drivers/media/video/tda8290.h b/drivers/media/video/tda8290.h index 3a1f04520615..4c547577e7ca 100644 --- a/drivers/media/video/tda8290.h +++ b/drivers/media/video/tda8290.h @@ -18,24 +18,36 @@ #define __TDA8290_H__ #include -#include "tuner-driver.h" +#include "dvb_frontend.h" + +struct tda829x_config +{ + unsigned int *lna_cfg; + int (*tuner_callback) (void *dev, int command, int arg); +}; #if defined(CONFIG_TUNER_TDA8290) || (defined(CONFIG_TUNER_TDA8290_MODULE) && defined(MODULE)) -extern int tda829x_probe(struct tuner *t); +extern int tda829x_probe(struct i2c_adapter *i2c_adap, u8 i2c_addr); -extern int tda829x_attach(struct tuner *t); +extern struct dvb_frontend *tda829x_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c_adap, + u8 i2c_addr, + struct tda829x_config *cfg); #else -static inline int tda829x_probe(struct tuner *t) +static inline int tda829x_probe(struct i2c_adapter *i2c_adap, u8 i2c_addr) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); return -EINVAL; } -static inline int tda829x_attach(struct tuner *t) +static inline struct dvb_frontend *tda829x_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c_adap, + u8 i2c_addr, + struct tda829x_config *cfg) { printk(KERN_INFO "%s: not probed - driver disabled by Kconfig\n", __FUNCTION__); - return -EINVAL; + return NULL; } #endif diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c index d506d4bf8253..98d45c4912bd 100644 --- a/drivers/media/video/tda9887.c +++ b/drivers/media/video/tda9887.c @@ -9,6 +9,7 @@ #include #include #include +#include "tuner-i2c.h" #include "tda9887.h" diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 5f8bffc8209b..0cc190761e24 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -52,7 +52,34 @@ static unsigned int no_autodetect = 0; static unsigned int show_i2c = 0; /* insmod options used at runtime => read/write */ -int tuner_debug = 0; +static int tuner_debug; + +#define tuner_warn(fmt, arg...) do { \ + printk(KERN_WARNING "%s %d-%04x: " fmt, PREFIX, \ + i2c_adapter_id(t->i2c->adapter), \ + t->i2c->addr, ##arg); \ + } while (0) + +#define tuner_info(fmt, arg...) do { \ + printk(KERN_INFO "%s %d-%04x: " fmt, PREFIX, \ + i2c_adapter_id(t->i2c->adapter), \ + t->i2c->addr, ##arg); \ + } while (0) + +#define tuner_err(fmt, arg...) do { \ + printk(KERN_ERR "%s %d-%04x: " fmt, PREFIX, \ + i2c_adapter_id(t->i2c->adapter), \ + t->i2c->addr, ##arg); \ + } while (0) + +#define tuner_dbg(fmt, arg...) do { \ + if (tuner_debug) \ + printk(KERN_DEBUG "%s %d-%04x: " fmt, PREFIX, \ + i2c_adapter_id(t->i2c->adapter), \ + t->i2c->addr, ##arg); \ + } while (0) + +/* ------------------------------------------------------------------------ */ static unsigned int tv_range[2] = { 44, 958 }; static unsigned int radio_range[2] = { 65, 108 }; @@ -261,6 +288,15 @@ static void attach_simple_tuner(struct tuner *t) simple_tuner_attach(&t->fe, t->i2c->adapter, t->i2c->addr, &cfg); } +static void attach_tda829x(struct tuner *t) +{ + struct tda829x_config cfg = { + .lna_cfg = &t->config, + .tuner_callback = t->tuner_callback, + }; + tda829x_attach(&t->fe, t->i2c->adapter, t->i2c->addr, &cfg); +} + static void set_type(struct i2c_client *c, unsigned int type, unsigned int new_mode_mask, unsigned int new_config, int (*tuner_callback) (void *dev, int command,int arg)) @@ -303,7 +339,7 @@ static void set_type(struct i2c_client *c, unsigned int type, break; case TUNER_PHILIPS_TDA8290: { - tda829x_attach(t); + attach_tda829x(t); break; } case TUNER_TEA5767: @@ -1045,7 +1081,8 @@ static int tuner_probe(struct i2c_client *client) case 0x4b: /* If chip is not tda8290, don't register. since it can be tda9887*/ - if (tda829x_probe(t) == 0) { + if (tda829x_probe(t->i2c->adapter, + t->i2c->addr) == 0) { tuner_dbg("tda829x detected\n"); } else { /* Default is being tda9887 */ diff --git a/drivers/media/video/tuner-driver.h b/drivers/media/video/tuner-driver.h index 91913ee08a07..a215161d0241 100644 --- a/drivers/media/video/tuner-driver.h +++ b/drivers/media/video/tuner-driver.h @@ -24,13 +24,10 @@ #include #include -#include "tuner-i2c.h" #include "dvb_frontend.h" extern unsigned const int tuner_count; -struct tuner; - struct analog_tuner_ops { void (*set_params)(struct dvb_frontend *fe, struct analog_parameters *params); @@ -69,28 +66,4 @@ struct tuner { int (*tuner_callback) (void *dev, int command,int arg); }; -/* ------------------------------------------------------------------------ */ - -#define tuner_warn(fmt, arg...) do { \ - printk(KERN_WARNING "%s %d-%04x: " fmt, PREFIX, \ - i2c_adapter_id(t->i2c->adapter), t->i2c->addr, ##arg); \ - } while (0) - -#define tuner_info(fmt, arg...) do { \ - printk(KERN_INFO "%s %d-%04x: " fmt, PREFIX, \ - i2c_adapter_id(t->i2c->adapter), t->i2c->addr , ##arg); \ - } while (0) - -#define tuner_err(fmt, arg...) do { \ - printk(KERN_ERR "%s %d-%04x: " fmt, PREFIX, \ - i2c_adapter_id(t->i2c->adapter), t->i2c->addr , ##arg); \ - } while (0) - -#define tuner_dbg(fmt, arg...) do { \ - extern int tuner_debug; \ - if (tuner_debug) \ - printk(KERN_DEBUG "%s %d-%04x: " fmt, PREFIX, \ - i2c_adapter_id(t->i2c->adapter), t->i2c->addr , ##arg); \ - } while (0) - #endif /* __TUNER_DRIVER_H__ */ diff --git a/drivers/media/video/tuner-i2c.h b/drivers/media/video/tuner-i2c.h index d7cf72c3fd71..de52e8ffd347 100644 --- a/drivers/media/video/tuner-i2c.h +++ b/drivers/media/video/tuner-i2c.h @@ -59,7 +59,6 @@ static inline int tuner_i2c_xfer_send_recv(struct tuner_i2c_props *props, return (ret == 2) ? ilen : ret; } -#ifndef __TUNER_DRIVER_H__ #define tuner_warn(fmt, arg...) do { \ printk(KERN_WARNING "%s %d-%04x: " fmt, PREFIX, \ i2c_adapter_id(priv->i2c_props.adap), \ @@ -84,6 +83,5 @@ static inline int tuner_i2c_xfer_send_recv(struct tuner_i2c_props *props, i2c_adapter_id(priv->i2c_props.adap), \ priv->i2c_props.addr , ##arg); \ } while (0) -#endif /* __TUNER_DRIVER_H__ */ #endif /* __TUNER_I2C_H__ */ diff --git a/include/media/tuner.h b/include/media/tuner.h index d49392d90e56..97be269afbee 100644 --- a/include/media/tuner.h +++ b/include/media/tuner.h @@ -24,8 +24,6 @@ #include -extern int tuner_debug; - #define ADDR_UNSET (255) #define TUNER_TEMIC_PAL 0 /* 4002 FH5 (3X 7756, 9483) */ -- cgit v1.2.3-59-g8ed1b From a55db8cd7f8a107f3abcb4c803b1873b2be63663 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 9 Dec 2007 13:52:51 -0300 Subject: V4L/DVB (6786): tuner: add struct analog_demod_info to struct analog_tuner_ops Store the analog demodulator name in fe.ops.analog_demod_ops.info.name Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tda8290.c | 6 ++++++ drivers/media/video/tda9887.c | 3 +++ drivers/media/video/tuner-core.c | 3 +++ drivers/media/video/tuner-driver.h | 7 +++++++ 4 files changed, 19 insertions(+) diff --git a/drivers/media/video/tda8290.c b/drivers/media/video/tda8290.c index d0d13bc61250..403f96f998ec 100644 --- a/drivers/media/video/tda8290.c +++ b/drivers/media/video/tda8290.c @@ -636,6 +636,9 @@ static int tda8295_probe(struct tuner_i2c_props *i2c_props) } static struct analog_tuner_ops tda8290_tuner_ops = { + .info = { + .name = "TDA8290", + }, .set_params = tda8290_set_params, .has_signal = tda8290_has_signal, .standby = tda8290_standby, @@ -644,6 +647,9 @@ static struct analog_tuner_ops tda8290_tuner_ops = { }; static struct analog_tuner_ops tda8295_tuner_ops = { + .info = { + .name = "TDA8295", + }, .set_params = tda8295_set_params, .has_signal = tda8295_has_signal, .standby = tda8295_standby, diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c index 98d45c4912bd..8a95f097ba23 100644 --- a/drivers/media/video/tda9887.c +++ b/drivers/media/video/tda9887.c @@ -636,6 +636,9 @@ static void tda9887_release(struct dvb_frontend *fe) } static struct analog_tuner_ops tda9887_tuner_ops = { + .info = { + .name = "TDA9887", + }, .set_params = tda9887_set_params, .standby = tda9887_standby, .tuner_status = tda9887_tuner_status, diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 0cc190761e24..59e67c925758 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -410,6 +410,9 @@ static void set_type(struct i2c_client *c, unsigned int type, t->fe.ops.analog_demod_ops = &tuner_core_ops; t->fe.analog_demod_priv = t; + } else { + strlcpy(t->i2c->name, ops->info.name, + sizeof(t->i2c->name)); } tuner_dbg("type set to %s\n", t->i2c->name); diff --git a/drivers/media/video/tuner-driver.h b/drivers/media/video/tuner-driver.h index a215161d0241..c245f501a319 100644 --- a/drivers/media/video/tuner-driver.h +++ b/drivers/media/video/tuner-driver.h @@ -28,7 +28,14 @@ extern unsigned const int tuner_count; +struct analog_demod_info { + char name[128]; +}; + struct analog_tuner_ops { + + struct analog_demod_info info; + void (*set_params)(struct dvb_frontend *fe, struct analog_parameters *params); int (*has_signal)(struct dvb_frontend *fe); -- cgit v1.2.3-59-g8ed1b From 864a6b813ab6cb69f3552553899ae443329ecfa9 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 9 Dec 2007 17:21:54 -0300 Subject: V4L/DVB (6787): tuner: bug-fix: default mode was set to bogus value Fix type inconsistency in t->mode value, causing the following: tuner' 1-0043: freq set: unknown mode: 0x0004! (only visible with tuner debug enabled) Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 59e67c925758..355f9810facf 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -1138,11 +1138,11 @@ register_client: /* Sets a default mode */ if (t->mode_mask & T_ANALOG_TV) { - t->mode = T_ANALOG_TV; + t->mode = V4L2_TUNER_ANALOG_TV; } else if (t->mode_mask & T_RADIO) { - t->mode = T_RADIO; + t->mode = V4L2_TUNER_RADIO; } else { - t->mode = T_DIGITAL_TV; + t->mode = V4L2_TUNER_DIGITAL_TV; } set_type(client, t->type, t->mode_mask, t->config, t->tuner_callback); list_add_tail(&t->list, &tuner_list); -- cgit v1.2.3-59-g8ed1b From 2dcf84b36c23a2c34207ab650071f9ee33d3c4a2 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 10 Dec 2007 11:12:59 -0300 Subject: V4L/DVB (6788): tda8290: fix codingstyle, open brace following struct on the same line Fix codingstyle issue discovered after using new checkpatch.pl ERROR: open brace '{' following struct go on the same line 396: FILE: linux/drivers/media/video/tda8290.h:24: +struct tda829x_config +{ Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tda8290.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/media/video/tda8290.h b/drivers/media/video/tda8290.h index 4c547577e7ca..7bce03183d08 100644 --- a/drivers/media/video/tda8290.h +++ b/drivers/media/video/tda8290.h @@ -20,8 +20,7 @@ #include #include "dvb_frontend.h" -struct tda829x_config -{ +struct tda829x_config { unsigned int *lna_cfg; int (*tuner_callback) (void *dev, int command, int arg); }; -- cgit v1.2.3-59-g8ed1b From bd2b19a78cb215b67d8d016ea6607f04e48fa523 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 10 Dec 2007 16:08:25 -0300 Subject: V4L/DVB (6789): tuner: use char *name instead of 128 byte fixed array for demod info Don't waste 128 bytes of memory for a name that might not actually need it. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-driver.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/tuner-driver.h b/drivers/media/video/tuner-driver.h index c245f501a319..65ced435018a 100644 --- a/drivers/media/video/tuner-driver.h +++ b/drivers/media/video/tuner-driver.h @@ -29,7 +29,7 @@ extern unsigned const int tuner_count; struct analog_demod_info { - char name[128]; + char *name; }; struct analog_tuner_ops { -- cgit v1.2.3-59-g8ed1b From bfb12e38a8f828bb6394fd4f18010bad86832623 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 11 Dec 2007 11:51:53 -0300 Subject: V4L/DVB (6791): Rename all vidioc_ to saa7134_ Some functions are used also by saa7134-empress, and need to be exported. To avoid namespace confusion, rename all of them to saa7134_ Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-video.c | 178 ++++++++++++++-------------- 1 file changed, 89 insertions(+), 89 deletions(-) diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c index 043e1396857a..6f9f9dbdfdd1 100644 --- a/drivers/media/video/saa7134/saa7134-video.c +++ b/drivers/media/video/saa7134/saa7134-video.c @@ -1123,7 +1123,7 @@ static struct videobuf_queue_ops video_qops = { /* ------------------------------------------------------------------ */ -static int vidioc_g_ctrl(struct file *file, void *priv, +static int saa7134_g_ctrl(struct file *file, void *priv, struct v4l2_control *c) { struct saa7134_fh *fh = priv; @@ -1173,7 +1173,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, return 0; } -static int vidioc_s_ctrl(struct file *file, void *f, +static int saa7134_s_ctrl(struct file *file, void *f, struct v4l2_control *c) { const struct v4l2_queryctrl* ctrl; @@ -1507,7 +1507,7 @@ static int video_mmap(struct file *file, struct vm_area_struct * vma) /* ------------------------------------------------------------------ */ -static int vidioc_try_get_set_fmt_vbi(struct file *file, void *priv, +static int saa7134_try_get_set_fmt_vbi(struct file *file, void *priv, struct v4l2_format *f) { struct saa7134_fh *fh = priv; @@ -1527,7 +1527,7 @@ static int vidioc_try_get_set_fmt_vbi(struct file *file, void *priv, return 0; } -static int vidioc_g_fmt_cap(struct file *file, void *priv, +static int saa7134_g_fmt_cap(struct file *file, void *priv, struct v4l2_format *f) { struct saa7134_fh *fh = priv; @@ -1543,7 +1543,7 @@ static int vidioc_g_fmt_cap(struct file *file, void *priv, return 0; } -static int vidioc_g_fmt_overlay(struct file *file, void *priv, +static int saa7134_g_fmt_overlay(struct file *file, void *priv, struct v4l2_format *f) { struct saa7134_fh *fh = priv; @@ -1557,7 +1557,7 @@ static int vidioc_g_fmt_overlay(struct file *file, void *priv, return 0; } -static int vidioc_try_fmt_cap(struct file *file, void *priv, +static int saa7134_try_fmt_cap(struct file *file, void *priv, struct v4l2_format *f) { struct saa7134_fh *fh = priv; @@ -1608,7 +1608,7 @@ static int vidioc_try_fmt_cap(struct file *file, void *priv, return 0; } -static int vidioc_try_fmt_overlay(struct file *file, void *priv, +static int saa7134_try_fmt_overlay(struct file *file, void *priv, struct v4l2_format *f) { struct saa7134_fh *fh = priv; @@ -1622,13 +1622,13 @@ static int vidioc_try_fmt_overlay(struct file *file, void *priv, return verify_preview(dev, &f->fmt.win); } -static int vidioc_s_fmt_cap(struct file *file, void *priv, +static int saa7134_s_fmt_cap(struct file *file, void *priv, struct v4l2_format *f) { struct saa7134_fh *fh = priv; int err; - err = vidioc_try_fmt_cap(file, priv, f); + err = saa7134_try_fmt_cap(file, priv, f); if (0 != err) return err; @@ -1639,7 +1639,7 @@ static int vidioc_s_fmt_cap(struct file *file, void *priv, return 0; } -static int vidioc_s_fmt_overlay(struct file *file, void *priv, +static int saa7134_s_fmt_overlay(struct file *file, void *priv, struct v4l2_format *f) { struct saa7134_fh *fh = priv; @@ -1680,7 +1680,7 @@ static int vidioc_s_fmt_overlay(struct file *file, void *priv, return 0; } -static int vidioc_queryctrl(struct file *file, void *priv, +static int saa7134_queryctrl(struct file *file, void *priv, struct v4l2_queryctrl *c) { const struct v4l2_queryctrl *ctrl; @@ -1695,7 +1695,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, return 0; } -static int vidioc_enum_input(struct file *file, void *priv, +static int saa7134_enum_input(struct file *file, void *priv, struct v4l2_input *i) { struct saa7134_fh *fh = priv; @@ -1729,7 +1729,7 @@ static int vidioc_enum_input(struct file *file, void *priv, return 0; } -static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) +static int saa7134_g_input(struct file *file, void *priv, unsigned int *i) { struct saa7134_fh *fh = priv; struct saa7134_dev *dev = fh->dev; @@ -1738,7 +1738,7 @@ static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) return 0; } -static int vidioc_s_input(struct file *file, void *priv, unsigned int i) +static int saa7134_s_input(struct file *file, void *priv, unsigned int i) { struct saa7134_fh *fh = priv; struct saa7134_dev *dev = fh->dev; @@ -1758,7 +1758,7 @@ static int vidioc_s_input(struct file *file, void *priv, unsigned int i) return 0; } -static int vidioc_querycap(struct file *file, void *priv, +static int saa7134_querycap(struct file *file, void *priv, struct v4l2_capability *cap) { struct saa7134_fh *fh = priv; @@ -1785,7 +1785,7 @@ static int vidioc_querycap(struct file *file, void *priv, return 0; } -static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id * id) +static int saa7134_s_std(struct file *file, void *priv, v4l2_std_id *id) { struct saa7134_fh *fh = priv; struct saa7134_dev *dev = fh->dev; @@ -1847,7 +1847,7 @@ static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id * id) return 0; } -static int vidioc_cropcap(struct file *file, void *priv, +static int saa7134_cropcap(struct file *file, void *priv, struct v4l2_cropcap *cap) { struct saa7134_fh *fh = priv; @@ -1871,7 +1871,7 @@ static int vidioc_cropcap(struct file *file, void *priv, return 0; } -static int vidioc_g_crop(struct file *file, void *f, struct v4l2_crop *crop) +static int saa7134_g_crop(struct file *file, void *f, struct v4l2_crop *crop) { struct saa7134_fh *fh = f; struct saa7134_dev *dev = fh->dev; @@ -1883,7 +1883,7 @@ static int vidioc_g_crop(struct file *file, void *f, struct v4l2_crop *crop) return 0; } -static int vidioc_s_crop(struct file *file, void *f, struct v4l2_crop *crop) +static int saa7134_s_crop(struct file *file, void *f, struct v4l2_crop *crop) { struct saa7134_fh *fh = f; struct saa7134_dev *dev = fh->dev; @@ -1920,7 +1920,7 @@ static int vidioc_s_crop(struct file *file, void *f, struct v4l2_crop *crop) return 0; } -static int vidioc_g_tuner(struct file *file, void *priv, +static int saa7134_g_tuner(struct file *file, void *priv, struct v4l2_tuner *t) { struct saa7134_fh *fh = priv; @@ -1949,7 +1949,7 @@ static int vidioc_g_tuner(struct file *file, void *priv, return 0; } -static int vidioc_s_tuner(struct file *file, void *priv, +static int saa7134_s_tuner(struct file *file, void *priv, struct v4l2_tuner *t) { struct saa7134_fh *fh = priv; @@ -1971,7 +1971,7 @@ static int vidioc_s_tuner(struct file *file, void *priv, return 0; } -static int vidioc_g_frequency(struct file *file, void *priv, +static int saa7134_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { struct saa7134_fh *fh = priv; @@ -1983,7 +1983,7 @@ static int vidioc_g_frequency(struct file *file, void *priv, return 0; } -static int vidioc_s_frequency(struct file *file, void *priv, +static int saa7134_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { struct saa7134_fh *fh = priv; @@ -2010,18 +2010,18 @@ static int vidioc_s_frequency(struct file *file, void *priv, return 0; } -static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a) +static int saa7134_g_audio(struct file *file, void *priv, struct v4l2_audio *a) { strcpy(a->name, "audio"); return 0; } -static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a) +static int saa7134_s_audio(struct file *file, void *priv, struct v4l2_audio *a) { return 0; } -static int vidioc_g_priority(struct file *file, void *f, enum v4l2_priority *p) +static int saa7134_g_priority(struct file *file, void *f, enum v4l2_priority *p) { struct saa7134_fh *fh = f; struct saa7134_dev *dev = fh->dev; @@ -2030,7 +2030,7 @@ static int vidioc_g_priority(struct file *file, void *f, enum v4l2_priority *p) return 0; } -static int vidioc_s_priority(struct file *file, void *f, +static int saa7134_s_priority(struct file *file, void *f, enum v4l2_priority prio) { struct saa7134_fh *fh = f; @@ -2039,7 +2039,7 @@ static int vidioc_s_priority(struct file *file, void *f, return v4l2_prio_change(&dev->prio, &fh->prio, prio); } -static int vidioc_enum_fmt_cap(struct file *file, void *priv, +static int saa7134_enum_fmt_cap(struct file *file, void *priv, struct v4l2_fmtdesc *f) { if (f->index >= FORMATS) @@ -2053,7 +2053,7 @@ static int vidioc_enum_fmt_cap(struct file *file, void *priv, return 0; } -static int vidioc_enum_fmt_overlay(struct file *file, void *priv, +static int saa7134_enum_fmt_overlay(struct file *file, void *priv, struct v4l2_fmtdesc *f) { if (saa7134_no_overlay > 0) { @@ -2072,7 +2072,7 @@ static int vidioc_enum_fmt_overlay(struct file *file, void *priv, return 0; } -static int vidioc_enum_fmt_vbi(struct file *file, void *priv, +static int saa7134_enum_fmt_vbi(struct file *file, void *priv, struct v4l2_fmtdesc *f) { if (0 != f->index) @@ -2084,7 +2084,7 @@ static int vidioc_enum_fmt_vbi(struct file *file, void *priv, return 0; } -static int vidioc_g_fbuf(struct file *file, void *f, +static int saa7134_g_fbuf(struct file *file, void *f, struct v4l2_framebuffer *fb) { struct saa7134_fh *fh = f; @@ -2096,7 +2096,7 @@ static int vidioc_g_fbuf(struct file *file, void *f, return 0; } -static int vidioc_s_fbuf(struct file *file, void *f, +static int saa7134_s_fbuf(struct file *file, void *f, struct v4l2_framebuffer *fb) { struct saa7134_fh *fh = f; @@ -2121,7 +2121,7 @@ static int vidioc_s_fbuf(struct file *file, void *f, return 0; } -static int vidioc_overlay(struct file *file, void *f, unsigned int on) +static int saa7134_overlay(struct file *file, void *f, unsigned int on) { struct saa7134_fh *fh = f; struct saa7134_dev *dev = fh->dev; @@ -2158,34 +2158,34 @@ static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf) } #endif -static int vidioc_reqbufs(struct file *file, void *priv, +static int saa7134_reqbufs(struct file *file, void *priv, struct v4l2_requestbuffers *p) { struct saa7134_fh *fh = priv; return videobuf_reqbufs(saa7134_queue(fh), p); } -static int vidioc_querybuf(struct file *file, void *priv, +static int saa7134_querybuf(struct file *file, void *priv, struct v4l2_buffer *b) { struct saa7134_fh *fh = priv; return videobuf_querybuf(saa7134_queue(fh), b); } -static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b) +static int saa7134_qbuf(struct file *file, void *priv, struct v4l2_buffer *b) { struct saa7134_fh *fh = priv; return videobuf_qbuf(saa7134_queue(fh), b); } -static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) +static int saa7134_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) { struct saa7134_fh *fh = priv; return videobuf_dqbuf(saa7134_queue(fh), b, file->f_flags & O_NONBLOCK); } -static int vidioc_streamon(struct file *file, void *priv, +static int saa7134_streamon(struct file *file, void *priv, enum v4l2_buf_type type) { struct saa7134_fh *fh = priv; @@ -2198,7 +2198,7 @@ static int vidioc_streamon(struct file *file, void *priv, return videobuf_streamon(saa7134_queue(fh)); } -static int vidioc_streamoff(struct file *file, void *priv, +static int saa7134_streamoff(struct file *file, void *priv, enum v4l2_buf_type type) { int err; @@ -2213,7 +2213,7 @@ static int vidioc_streamoff(struct file *file, void *priv, return 0; } -static int vidioc_g_parm(struct file *file, void *fh, +static int saa7134_g_parm(struct file *file, void *fh, struct v4l2_streamparm *parm) { return 0; @@ -2358,50 +2358,50 @@ struct video_device saa7134_video_template = VID_TYPE_CLIPPING|VID_TYPE_SCALES, .fops = &video_fops, .minor = -1, - .vidioc_querycap = vidioc_querycap, - .vidioc_enum_fmt_cap = vidioc_enum_fmt_cap, - .vidioc_g_fmt_cap = vidioc_g_fmt_cap, - .vidioc_try_fmt_cap = vidioc_try_fmt_cap, - .vidioc_s_fmt_cap = vidioc_s_fmt_cap, - .vidioc_enum_fmt_overlay = vidioc_enum_fmt_overlay, - .vidioc_g_fmt_overlay = vidioc_g_fmt_overlay, - .vidioc_try_fmt_overlay = vidioc_try_fmt_overlay, - .vidioc_s_fmt_overlay = vidioc_s_fmt_overlay, - .vidioc_enum_fmt_vbi = vidioc_enum_fmt_vbi, - .vidioc_g_fmt_vbi = vidioc_try_get_set_fmt_vbi, - .vidioc_try_fmt_vbi = vidioc_try_get_set_fmt_vbi, - .vidioc_s_fmt_vbi = vidioc_try_get_set_fmt_vbi, - .vidioc_g_audio = vidioc_g_audio, - .vidioc_s_audio = vidioc_s_audio, - .vidioc_cropcap = vidioc_cropcap, - .vidioc_reqbufs = vidioc_reqbufs, - .vidioc_querybuf = vidioc_querybuf, - .vidioc_qbuf = vidioc_qbuf, - .vidioc_dqbuf = vidioc_dqbuf, - .vidioc_s_std = vidioc_s_std, - .vidioc_enum_input = vidioc_enum_input, - .vidioc_g_input = vidioc_g_input, - .vidioc_s_input = vidioc_s_input, - .vidioc_queryctrl = vidioc_queryctrl, - .vidioc_g_ctrl = vidioc_g_ctrl, - .vidioc_s_ctrl = vidioc_s_ctrl, - .vidioc_streamon = vidioc_streamon, - .vidioc_streamoff = vidioc_streamoff, - .vidioc_g_tuner = vidioc_g_tuner, - .vidioc_s_tuner = vidioc_s_tuner, + .vidioc_querycap = saa7134_querycap, + .vidioc_enum_fmt_cap = saa7134_enum_fmt_cap, + .vidioc_g_fmt_cap = saa7134_g_fmt_cap, + .vidioc_try_fmt_cap = saa7134_try_fmt_cap, + .vidioc_s_fmt_cap = saa7134_s_fmt_cap, + .vidioc_enum_fmt_overlay = saa7134_enum_fmt_overlay, + .vidioc_g_fmt_overlay = saa7134_g_fmt_overlay, + .vidioc_try_fmt_overlay = saa7134_try_fmt_overlay, + .vidioc_s_fmt_overlay = saa7134_s_fmt_overlay, + .vidioc_enum_fmt_vbi = saa7134_enum_fmt_vbi, + .vidioc_g_fmt_vbi = saa7134_try_get_set_fmt_vbi, + .vidioc_try_fmt_vbi = saa7134_try_get_set_fmt_vbi, + .vidioc_s_fmt_vbi = saa7134_try_get_set_fmt_vbi, + .vidioc_g_audio = saa7134_g_audio, + .vidioc_s_audio = saa7134_s_audio, + .vidioc_cropcap = saa7134_cropcap, + .vidioc_reqbufs = saa7134_reqbufs, + .vidioc_querybuf = saa7134_querybuf, + .vidioc_qbuf = saa7134_qbuf, + .vidioc_dqbuf = saa7134_dqbuf, + .vidioc_s_std = saa7134_s_std, + .vidioc_enum_input = saa7134_enum_input, + .vidioc_g_input = saa7134_g_input, + .vidioc_s_input = saa7134_s_input, + .vidioc_queryctrl = saa7134_queryctrl, + .vidioc_g_ctrl = saa7134_g_ctrl, + .vidioc_s_ctrl = saa7134_s_ctrl, + .vidioc_streamon = saa7134_streamon, + .vidioc_streamoff = saa7134_streamoff, + .vidioc_g_tuner = saa7134_g_tuner, + .vidioc_s_tuner = saa7134_s_tuner, #ifdef CONFIG_VIDEO_V4L1_COMPAT .vidiocgmbuf = vidiocgmbuf, #endif - .vidioc_g_crop = vidioc_g_crop, - .vidioc_s_crop = vidioc_s_crop, - .vidioc_g_fbuf = vidioc_g_fbuf, - .vidioc_s_fbuf = vidioc_s_fbuf, - .vidioc_overlay = vidioc_overlay, - .vidioc_g_priority = vidioc_g_priority, - .vidioc_s_priority = vidioc_s_priority, - .vidioc_g_parm = vidioc_g_parm, - .vidioc_g_frequency = vidioc_g_frequency, - .vidioc_s_frequency = vidioc_s_frequency, + .vidioc_g_crop = saa7134_g_crop, + .vidioc_s_crop = saa7134_s_crop, + .vidioc_g_fbuf = saa7134_g_fbuf, + .vidioc_s_fbuf = saa7134_s_fbuf, + .vidioc_overlay = saa7134_overlay, + .vidioc_g_priority = saa7134_g_priority, + .vidioc_s_priority = saa7134_s_priority, + .vidioc_g_parm = saa7134_g_parm, + .vidioc_g_frequency = saa7134_g_frequency, + .vidioc_s_frequency = saa7134_s_frequency, .tvnorms = SAA7134_NORMS, .current_norm = V4L2_STD_PAL, }; @@ -2416,10 +2416,10 @@ struct video_device saa7134_vbi_template = struct video_device saa7134_radio_template = { - .name = "saa7134-radio", - .type = VID_TYPE_TUNER, - .fops = &radio_fops, - .minor = -1, + .name = "saa7134-radio", + .type = VID_TYPE_TUNER, + .fops = &radio_fops, + .minor = -1, .vidioc_querycap = radio_querycap, .vidioc_g_tuner = radio_g_tuner, .vidioc_enum_input = radio_enum_input, @@ -2430,10 +2430,10 @@ struct video_device saa7134_radio_template = .vidioc_s_std = radio_s_std, .vidioc_queryctrl = radio_queryctrl, .vidioc_g_input = radio_g_input, - .vidioc_g_ctrl = vidioc_g_ctrl, - .vidioc_s_ctrl = vidioc_s_ctrl, - .vidioc_g_frequency = vidioc_g_frequency, - .vidioc_s_frequency = vidioc_s_frequency, + .vidioc_g_ctrl = saa7134_g_ctrl, + .vidioc_s_ctrl = saa7134_s_ctrl, + .vidioc_g_frequency = saa7134_g_frequency, + .vidioc_s_frequency = saa7134_s_frequency, }; int saa7134_video_init1(struct saa7134_dev *dev) -- cgit v1.2.3-59-g8ed1b From a9622391acbcdb124b55eb674dc5196eb55dc105 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 11 Dec 2007 12:05:06 -0300 Subject: V4L/DVB (6792): Fix VBI support VBI were broken, since there weren't any function handlers for it. This patch fixes it, by removing the vbi_template, using, instead video_template. This also saves some space at the data segment. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-core.c | 4 +++- drivers/media/video/saa7134/saa7134-video.c | 8 -------- 2 files changed, 3 insertions(+), 9 deletions(-) diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index 92c48ee1591b..52baa4f7f7dd 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -1053,7 +1053,9 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, printk(KERN_INFO "%s: registered device video%d [v4l2]\n", dev->name,dev->video_dev->minor & 0x1f); - dev->vbi_dev = vdev_init(dev,&saa7134_vbi_template,"vbi"); + dev->vbi_dev = vdev_init(dev, &saa7134_video_template, "vbi"); + dev->vbi_dev->type = VID_TYPE_TUNER | VID_TYPE_TELETEXT; + err = video_register_device(dev->vbi_dev,VFL_TYPE_VBI, vbi_nr[dev->nr]); if (err < 0) diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c index 6f9f9dbdfdd1..6a29b75beaa6 100644 --- a/drivers/media/video/saa7134/saa7134-video.c +++ b/drivers/media/video/saa7134/saa7134-video.c @@ -2406,14 +2406,6 @@ struct video_device saa7134_video_template = .current_norm = V4L2_STD_PAL, }; -struct video_device saa7134_vbi_template = -{ - .name = "saa7134-vbi", - .type = VID_TYPE_TUNER|VID_TYPE_TELETEXT, - .fops = &video_fops, - .minor = -1, -}; - struct video_device saa7134_radio_template = { .name = "saa7134-radio", -- cgit v1.2.3-59-g8ed1b From 2c10e8a8985e41addbbbe54b403418c27462f854 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 11 Dec 2007 12:56:23 -0300 Subject: V4L/DVB (6793): Convert saa7134-empress to video_ioctl2 saa7134 were converted to video_ioctl2, but saa7134_empress weren't. This broke saa7134-empress, since it were dependent of saa7134_common_ioctl. With the conversion, the module had a size decrease of 436 bytes on x86_64: text data bss dec hex filename 5196 4912 4 10112 2780 old/saa7134-empress.ko 4760 4912 4 9676 25cc new/saa7134-empress.ko Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-empress.c | 293 +++++++++++++++----------- drivers/media/video/saa7134/saa7134-video.c | 15 +- drivers/media/video/saa7134/saa7134.h | 13 +- 3 files changed, 183 insertions(+), 138 deletions(-) diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c index 9322f44865b8..b1b01fa86720 100644 --- a/drivers/media/video/saa7134/saa7134-empress.c +++ b/drivers/media/video/saa7134/saa7134-empress.c @@ -161,152 +161,176 @@ ts_mmap(struct file *file, struct vm_area_struct * vma) * video_generic_ioctl (and maybe others). userspace * copying is done already, arg is a kernel pointer. */ -static int ts_do_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, void *arg) + +static int empress_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) { - struct saa7134_dev *dev = file->private_data; - struct v4l2_ext_controls *ctrls = arg; - - if (debug > 1) - v4l_print_ioctl(dev->name,cmd); - switch (cmd) { - case VIDIOC_QUERYCAP: - { - struct v4l2_capability *cap = arg; - - memset(cap,0,sizeof(*cap)); - strcpy(cap->driver, "saa7134"); - strlcpy(cap->card, saa7134_boards[dev->board].name, - sizeof(cap->card)); - sprintf(cap->bus_info,"PCI:%s",pci_name(dev->pci)); - cap->version = SAA7134_VERSION_CODE; - cap->capabilities = - V4L2_CAP_VIDEO_CAPTURE | - V4L2_CAP_READWRITE | - V4L2_CAP_STREAMING; - return 0; - } + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + + strcpy(cap->driver, "saa7134"); + strlcpy(cap->card, saa7134_boards[dev->board].name, + sizeof(cap->card)); + sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci)); + cap->version = SAA7134_VERSION_CODE; + cap->capabilities = + V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_READWRITE | + V4L2_CAP_STREAMING; + return 0; +} - /* --- input switching --------------------------------------- */ - case VIDIOC_ENUMINPUT: - { - struct v4l2_input *i = arg; +static int empress_enum_input(struct file *file, void *priv, + struct v4l2_input *i) +{ + if (i->index != 0) + return -EINVAL; - if (i->index != 0) - return -EINVAL; - i->type = V4L2_INPUT_TYPE_CAMERA; - strcpy(i->name,"CCIR656"); - return 0; - } - case VIDIOC_G_INPUT: - { - int *i = arg; - *i = 0; - return 0; - } - case VIDIOC_S_INPUT: - { - int *i = arg; + i->type = V4L2_INPUT_TYPE_CAMERA; + strcpy(i->name, "CCIR656"); - if (*i != 0) - return -EINVAL; - return 0; - } - /* --- capture ioctls ---------------------------------------- */ - - case VIDIOC_ENUM_FMT: - { - struct v4l2_fmtdesc *f = arg; - int index; - - index = f->index; - if (index != 0) - return -EINVAL; - - memset(f,0,sizeof(*f)); - f->index = index; - strlcpy(f->description, "MPEG TS", sizeof(f->description)); - f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - f->pixelformat = V4L2_PIX_FMT_MPEG; - return 0; - } + return 0; +} - case VIDIOC_G_FMT: - { - struct v4l2_format *f = arg; +static int empress_g_input(struct file *file, void *priv, unsigned int *i) +{ + *i = 0; + return 0; +} - memset(f,0,sizeof(*f)); - f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; +static int empress_s_input(struct file *file, void *priv, unsigned int i) +{ + if (i != 0) + return -EINVAL; - saa7134_i2c_call_clients(dev, cmd, arg); - f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; - f->fmt.pix.sizeimage = TS_PACKET_SIZE * dev->ts.nr_packets; - return 0; - } + return 0; +} - case VIDIOC_S_FMT: - { - struct v4l2_format *f = arg; +static int empress_enum_fmt_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + if (f->index != 0) + return -EINVAL; - if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; + strlcpy(f->description, "MPEG TS", sizeof(f->description)); + f->pixelformat = V4L2_PIX_FMT_MPEG; - saa7134_i2c_call_clients(dev, cmd, arg); - f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; - f->fmt.pix.sizeimage = TS_PACKET_SIZE* dev->ts.nr_packets; - return 0; - } + return 0; +} - case VIDIOC_REQBUFS: - return videobuf_reqbufs(&dev->empress_tsq,arg); +static int empress_g_fmt_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; - case VIDIOC_QUERYBUF: - return videobuf_querybuf(&dev->empress_tsq,arg); + saa7134_i2c_call_clients(dev, VIDIOC_G_FMT, f); - case VIDIOC_QBUF: - return videobuf_qbuf(&dev->empress_tsq,arg); + f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; + f->fmt.pix.sizeimage = TS_PACKET_SIZE * dev->ts.nr_packets; - case VIDIOC_DQBUF: - return videobuf_dqbuf(&dev->empress_tsq,arg, - file->f_flags & O_NONBLOCK); + return 0; +} - case VIDIOC_STREAMON: - return videobuf_streamon(&dev->empress_tsq); +static int empress_s_fmt_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; - case VIDIOC_STREAMOFF: - return videobuf_streamoff(&dev->empress_tsq); + saa7134_i2c_call_clients(dev, VIDIOC_S_FMT, f); - case VIDIOC_QUERYCTRL: - case VIDIOC_G_CTRL: - case VIDIOC_S_CTRL: - return saa7134_common_ioctl(dev, cmd, arg); + f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; + f->fmt.pix.sizeimage = TS_PACKET_SIZE * dev->ts.nr_packets; - case VIDIOC_S_EXT_CTRLS: - /* count == 0 is abused in saa6752hs.c, so that special - case is handled here explicitly. */ - if (ctrls->count == 0) - return 0; - if (ctrls->ctrl_class != V4L2_CTRL_CLASS_MPEG) - return -EINVAL; - saa7134_i2c_call_clients(dev, VIDIOC_S_EXT_CTRLS, arg); - ts_init_encoder(dev); - return 0; - case VIDIOC_G_EXT_CTRLS: - if (ctrls->ctrl_class != V4L2_CTRL_CLASS_MPEG) - return -EINVAL; - saa7134_i2c_call_clients(dev, VIDIOC_G_EXT_CTRLS, arg); + return 0; +} + + +static int empress_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *p) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + + return videobuf_reqbufs(&dev->empress_tsq, p); +} + +static int empress_querybuf(struct file *file, void *priv, + struct v4l2_buffer *b) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + + return videobuf_querybuf(&dev->empress_tsq, b); +} + +static int empress_qbuf(struct file *file, void *priv, struct v4l2_buffer *b) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + + return videobuf_qbuf(&dev->empress_tsq, b); +} + +static int empress_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + + return videobuf_dqbuf(&dev->empress_tsq, b, + file->f_flags & O_NONBLOCK); +} + +static int empress_streamon(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + + return videobuf_streamon(&dev->empress_tsq); +} + +static int empress_streamoff(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + + return videobuf_streamoff(&dev->empress_tsq); +} + +static int empress_s_ext_ctrls(struct file *file, void *priv, + struct v4l2_ext_controls *ctrls) +{ + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + + /* count == 0 is abused in saa6752hs.c, so that special + case is handled here explicitly. */ + if (ctrls->count == 0) return 0; - default: - return -ENOIOCTLCMD; - } + if (ctrls->ctrl_class != V4L2_CTRL_CLASS_MPEG) + return -EINVAL; + + saa7134_i2c_call_clients(dev, VIDIOC_S_EXT_CTRLS, ctrls); + ts_init_encoder(dev); + return 0; } -static int ts_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static int empress_g_ext_ctrls(struct file *file, void *priv, + struct v4l2_ext_controls *ctrls) { - return video_usercopy(inode, file, cmd, arg, ts_do_ioctl); + struct saa7134_fh *fh = priv; + struct saa7134_dev *dev = fh->dev; + + if (ctrls->ctrl_class != V4L2_CTRL_CLASS_MPEG) + return -EINVAL; + saa7134_i2c_call_clients(dev, VIDIOC_G_EXT_CTRLS, ctrls); + + return 0; } static const struct file_operations ts_fops = @@ -317,7 +341,7 @@ static const struct file_operations ts_fops = .read = ts_read, .poll = ts_poll, .mmap = ts_mmap, - .ioctl = ts_ioctl, + .ioctl = video_ioctl2, .llseek = no_llseek, }; @@ -330,6 +354,29 @@ static struct video_device saa7134_empress_template = .type2 = 0 /* FIXME */, .fops = &ts_fops, .minor = -1, + + .vidioc_querycap = empress_querycap, + .vidioc_enum_fmt_cap = empress_enum_fmt_cap, + .vidioc_s_fmt_cap = empress_s_fmt_cap, + .vidioc_g_fmt_cap = empress_g_fmt_cap, + .vidioc_reqbufs = empress_reqbufs, + .vidioc_querybuf = empress_querybuf, + .vidioc_qbuf = empress_qbuf, + .vidioc_dqbuf = empress_dqbuf, + .vidioc_streamon = empress_streamon, + .vidioc_streamoff = empress_streamoff, + .vidioc_s_ext_ctrls = empress_s_ext_ctrls, + .vidioc_g_ext_ctrls = empress_g_ext_ctrls, + .vidioc_enum_input = empress_enum_input, + .vidioc_g_input = empress_g_input, + .vidioc_s_input = empress_s_input, + + .vidioc_queryctrl = saa7134_queryctrl, + .vidioc_g_ctrl = saa7134_g_ctrl, + .vidioc_s_ctrl = saa7134_s_ctrl, + + .tvnorms = SAA7134_NORMS, + .current_norm = V4L2_STD_PAL, }; static void empress_signal_update(struct work_struct *work) diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c index 6a29b75beaa6..9705f1f39509 100644 --- a/drivers/media/video/saa7134/saa7134-video.c +++ b/drivers/media/video/saa7134/saa7134-video.c @@ -217,12 +217,6 @@ static struct saa7134_format formats[] = { .vbi_v_start_1 = 273, \ .src_timing = 7 -#define SAA7134_NORMS \ - V4L2_STD_PAL | V4L2_STD_PAL_N | \ - V4L2_STD_PAL_Nc | V4L2_STD_SECAM | \ - V4L2_STD_NTSC | V4L2_STD_PAL_M | \ - V4L2_STD_PAL_60 - static struct saa7134_tvnorm tvnorms[] = { { .name = "PAL", /* autodetect */ @@ -1123,8 +1117,7 @@ static struct videobuf_queue_ops video_qops = { /* ------------------------------------------------------------------ */ -static int saa7134_g_ctrl(struct file *file, void *priv, - struct v4l2_control *c) +int saa7134_g_ctrl(struct file *file, void *priv, struct v4l2_control *c) { struct saa7134_fh *fh = priv; struct saa7134_dev *dev = fh->dev; @@ -1173,8 +1166,7 @@ static int saa7134_g_ctrl(struct file *file, void *priv, return 0; } -static int saa7134_s_ctrl(struct file *file, void *f, - struct v4l2_control *c) +int saa7134_s_ctrl(struct file *file, void *f, struct v4l2_control *c) { const struct v4l2_queryctrl* ctrl; struct saa7134_fh *fh = f; @@ -1680,8 +1672,7 @@ static int saa7134_s_fmt_overlay(struct file *file, void *priv, return 0; } -static int saa7134_queryctrl(struct file *file, void *priv, - struct v4l2_queryctrl *c) +int saa7134_queryctrl(struct file *file, void *priv, struct v4l2_queryctrl *c) { const struct v4l2_queryctrl *ctrl; diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 8fb95094ba84..3e77aeb7974f 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -566,6 +566,12 @@ struct saa7134_dev { #define saa_wait(us) { udelay(us); } +#define SAA7134_NORMS (\ + V4L2_STD_PAL | V4L2_STD_PAL_N | \ + V4L2_STD_PAL_Nc | V4L2_STD_SECAM | \ + V4L2_STD_NTSC | V4L2_STD_PAL_M | \ + V4L2_STD_PAL_60) + /* ----------------------------------------------------------- */ /* saa7134-core.c */ @@ -629,12 +635,13 @@ extern unsigned int video_debug; extern struct video_device saa7134_video_template; extern struct video_device saa7134_radio_template; +int saa7134_g_ctrl(struct file *file, void *priv, struct v4l2_control *c); +int saa7134_s_ctrl(struct file *file, void *f, struct v4l2_control *c); +int saa7134_queryctrl(struct file *file, void *priv, struct v4l2_queryctrl *c); + int saa7134_videoport_init(struct saa7134_dev *dev); void saa7134_set_tvnorm_hw(struct saa7134_dev *dev); -int saa7134_common_ioctl(struct saa7134_dev *dev, - unsigned int cmd, void *arg); - int saa7134_video_init1(struct saa7134_dev *dev); int saa7134_video_init2(struct saa7134_dev *dev); void saa7134_irq_video_signalchange(struct saa7134_dev *dev); -- cgit v1.2.3-59-g8ed1b From f6e90a66cde270cd6cc7aa1f4f0650930aa7f6bc Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 11 Dec 2007 15:01:57 -0300 Subject: V4L/DVB (6795): Add EXPORT_SYMBOL_GPL to the saa7134 video control routines Those newer functions are used by saa7134-empress. Adds export for them: +EXPORT_SYMBOL_GPL(saa7134_g_ctrl); +EXPORT_SYMBOL_GPL(saa7134_s_ctrl); +EXPORT_SYMBOL_GPL(saa7134_queryctrl); Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-video.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c index 9705f1f39509..1184d359e848 100644 --- a/drivers/media/video/saa7134/saa7134-video.c +++ b/drivers/media/video/saa7134/saa7134-video.c @@ -1165,6 +1165,7 @@ int saa7134_g_ctrl(struct file *file, void *priv, struct v4l2_control *c) } return 0; } +EXPORT_SYMBOL_GPL(saa7134_g_ctrl); int saa7134_s_ctrl(struct file *file, void *f, struct v4l2_control *c) { @@ -1278,6 +1279,7 @@ error: mutex_unlock(&dev->lock); return err; } +EXPORT_SYMBOL_GPL(saa7134_s_ctrl); /* ------------------------------------------------------------------ */ @@ -1685,6 +1687,7 @@ int saa7134_queryctrl(struct file *file, void *priv, struct v4l2_queryctrl *c) *c = (NULL != ctrl) ? *ctrl : no_ctrl; return 0; } +EXPORT_SYMBOL_GPL(saa7134_queryctrl); static int saa7134_enum_input(struct file *file, void *priv, struct v4l2_input *i) -- cgit v1.2.3-59-g8ed1b From 7206abbc2d19b6846b879fb266672b40da9961cb Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 9 Dec 2007 22:13:01 -0300 Subject: V4L/DVB (6800): tda18271: use an enum rather than an integer to store analog / digital state Use an enum rather than an integer #define to store analog / digital state. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index aecc0a5ac7b3..dbf0f619a90a 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -31,14 +31,16 @@ MODULE_PARM_DESC(debug, "set debug level (info=1, map=2, reg=4 (or-able))"); /*---------------------------------------------------------------------*/ -#define TDA18271_ANALOG 0 -#define TDA18271_DIGITAL 1 +enum tda18271_mode { + TDA18271_ANALOG, + TDA18271_DIGITAL, +}; struct tda18271_priv { u8 i2c_addr; struct i2c_adapter *i2c_adap; unsigned char tda18271_regs[TDA18271_NUM_REGS]; - int mode; + enum tda18271_mode mode; u32 frequency; u32 bandwidth; -- cgit v1.2.3-59-g8ed1b From e435f95ce6468f0240f050e14c9eac93e2fe7e71 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 9 Dec 2007 22:23:30 -0300 Subject: V4L/DVB (6801): tda18271: pass i2c gate configuration into tda18271_attach() If we pass TDA18271_GATE_DIGITAL into tda18271_attach(), it will always try to use the digital demodulator's i2c gate. If we pass TDA18271_GATE_ANALOG into tda18271_attach(), it will always try to use the analog demodulator's i2c gate. If we pass TDA18271_GATE_AUTO into tda18271_attach(), it will try to use the analog demodulator's i2c gate when tuning in analog mode, and it will try to use the digital demodulator's i2c gate when tuning in digital mode. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 34 +++++++++++++++++++++++++++---- drivers/media/dvb/frontends/tda18271.h | 12 +++++++++-- drivers/media/video/tda8290.c | 3 ++- 3 files changed, 42 insertions(+), 7 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index dbf0f619a90a..28c63fd4493e 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -40,7 +40,9 @@ struct tda18271_priv { u8 i2c_addr; struct i2c_adapter *i2c_adap; unsigned char tda18271_regs[TDA18271_NUM_REGS]; + enum tda18271_mode mode; + enum tda18271_i2c_gate gate; u32 frequency; u32 bandwidth; @@ -50,17 +52,39 @@ static int tda18271_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) { struct tda18271_priv *priv = fe->tuner_priv; struct analog_tuner_ops *ops = fe->ops.analog_demod_ops; + enum tda18271_i2c_gate gate; int ret = 0; - switch (priv->mode) { - case TDA18271_ANALOG: + switch (priv->gate) { + case TDA18271_GATE_DIGITAL: + case TDA18271_GATE_ANALOG: + gate = priv->gate; + break; + case TDA18271_GATE_AUTO: + default: + switch (priv->mode) { + case TDA18271_DIGITAL: + gate = TDA18271_GATE_DIGITAL; + break; + case TDA18271_ANALOG: + default: + gate = TDA18271_GATE_ANALOG; + break; + } + } + + switch (gate) { + case TDA18271_GATE_ANALOG: if (ops && ops->i2c_gate_ctrl) ret = ops->i2c_gate_ctrl(fe, enable); break; - case TDA18271_DIGITAL: + case TDA18271_GATE_DIGITAL: if (fe->ops.i2c_gate_ctrl) ret = fe->ops.i2c_gate_ctrl(fe, enable); break; + default: + ret = -EINVAL; + break; } return ret; @@ -713,7 +737,8 @@ static struct dvb_tuner_ops tda18271_tuner_ops = { }; struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, - struct i2c_adapter *i2c) + struct i2c_adapter *i2c, + enum tda18271_i2c_gate gate) { struct tda18271_priv *priv = NULL; @@ -724,6 +749,7 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, priv->i2c_addr = addr; priv->i2c_adap = i2c; + priv->gate = gate; memcpy(&fe->ops.tuner_ops, &tda18271_tuner_ops, sizeof(struct dvb_tuner_ops)); diff --git a/drivers/media/dvb/frontends/tda18271.h b/drivers/media/dvb/frontends/tda18271.h index a8a19a7197f0..d8400337263b 100644 --- a/drivers/media/dvb/frontends/tda18271.h +++ b/drivers/media/dvb/frontends/tda18271.h @@ -24,13 +24,21 @@ #include #include "dvb_frontend.h" +enum tda18271_i2c_gate { + TDA18271_GATE_AUTO = 0, + TDA18271_GATE_ANALOG, + TDA18271_GATE_DIGITAL, +}; + #if defined(CONFIG_DVB_TDA18271) || (defined(CONFIG_DVB_TDA18271_MODULE) && defined(MODULE)) extern struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, - struct i2c_adapter *i2c); + struct i2c_adapter *i2c, + enum tda18271_i2c_gate gate); #else static inline struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, - struct i2c_adapter *i2c) + struct i2c_adapter *i2c, + enum tda18271_i2c_gate gate); { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); return NULL; diff --git a/drivers/media/video/tda8290.c b/drivers/media/video/tda8290.c index 403f96f998ec..a451d9480c1d 100644 --- a/drivers/media/video/tda8290.c +++ b/drivers/media/video/tda8290.c @@ -574,7 +574,8 @@ static int tda829x_find_tuner(struct dvb_frontend *fe) if (data == 0x83) { priv->ver |= TDA18271; tda18271_attach(fe, priv->tda827x_addr, - priv->i2c_props.adap); + priv->i2c_props.adap, + TDA18271_GATE_ANALOG); } else { if ((data & 0x3c) == 0) priv->ver |= TDA8275; -- cgit v1.2.3-59-g8ed1b From 225ba900886f6d2d3447dd5bfdb95217f0619755 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 12 Dec 2007 21:46:26 -0300 Subject: V4L/DVB (6804): __videobuf_read_start is static Thanks to Jean Delvare for pointing this. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/videobuf-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/videobuf-core.c b/drivers/media/video/videobuf-core.c index 9662d1e40a0c..43fe3f78c8df 100644 --- a/drivers/media/video/videobuf-core.c +++ b/drivers/media/video/videobuf-core.c @@ -812,7 +812,7 @@ ssize_t videobuf_read_one(struct videobuf_queue *q, } /* Locking: Caller holds q->lock */ -int __videobuf_read_start(struct videobuf_queue *q) +static int __videobuf_read_start(struct videobuf_queue *q) { enum v4l2_field field; unsigned long flags = 0; -- cgit v1.2.3-59-g8ed1b From 63736784f73e7c38b2bad5ed3ed783dc102ba01e Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Dec 2007 06:34:12 -0300 Subject: V4L/DVB (6805): video std is a bitmask. Better to print in hexa Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/videodev.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/videodev.c b/drivers/media/video/videodev.c index 9611c3990285..28655f8983c6 100644 --- a/drivers/media/video/videodev.c +++ b/drivers/media/video/videodev.c @@ -973,7 +973,7 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, *id = vfd->current_norm; - dbgarg (cmd, "value=%Lu\n", (long long unsigned) *id); + dbgarg (cmd, "value=%08Lx\n", (long long unsigned) *id); ret=0; break; @@ -982,7 +982,7 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, { v4l2_std_id *id = arg,norm; - dbgarg (cmd, "value=%Lu\n", (long long unsigned) *id); + dbgarg (cmd, "value=%08Lx\n", (long long unsigned) *id); norm = (*id) & vfd->tvnorms; if ( vfd->tvnorms && !norm) /* Check if std is supported */ @@ -1008,7 +1008,7 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, break; ret=vfd->vidioc_querystd(file, fh, arg); if (!ret) - dbgarg (cmd, "detected std=%Lu\n", + dbgarg (cmd, "detected std=%08Lx\n", (unsigned long long)*p); break; } @@ -1028,7 +1028,7 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, if (!ret) dbgarg (cmd, "index=%d, name=%s, type=%d, " "audioset=%d, " - "tuner=%d, std=%Ld, status=%d\n", + "tuner=%d, std=%08Lx, status=%d\n", p->index,p->name,p->type,p->audioset, p->tuner, (unsigned long long)p->std, -- cgit v1.2.3-59-g8ed1b From 784c668b24dede8acd7044b490a538b5b6cd6b20 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Dec 2007 06:35:26 -0300 Subject: V4L/DVB (6806): Allow emulating changes of video std by vivi Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/vivi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index 2bbefd926256..0b5c1426bb90 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -919,7 +919,7 @@ static int vidioc_enum_input(struct file *file, void *priv, return -EINVAL; inp->type = V4L2_INPUT_TYPE_CAMERA; - inp->std = V4L2_STD_NTSC_M; + inp->std = V4L2_STD_525_60; strcpy(inp->name, "Camera"); return (0); @@ -1172,7 +1172,7 @@ static struct video_device vivi_template = { #ifdef CONFIG_VIDEO_V4L1_COMPAT .vidiocgmbuf = vidiocgmbuf, #endif - .tvnorms = V4L2_STD_NTSC_M, + .tvnorms = V4L2_STD_525_60, .current_norm = V4L2_STD_NTSC_M, }; /* ----------------------------------------------------------------- -- cgit v1.2.3-59-g8ed1b From 8996b3f3cfa9d21ba9ed31a116d5066e38827878 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Dec 2007 06:36:22 -0300 Subject: V4L/DVB (6807): fix debug enable The changes at vivi_template make debug option to not work properly. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/vivi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index 0b5c1426bb90..889e6611e039 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -1250,7 +1250,7 @@ MODULE_PARM_DESC(video_nr, "video iminor start number"); module_param(n_devs, int, 0); MODULE_PARM_DESC(n_devs, "number of video devices to create"); -module_param_named(debug, vivi.debug, int, 0644); +module_param_named(debug, vivi_template.debug, int, 0444); MODULE_PARM_DESC(debug, "activates debug info"); module_param(vid_limit, int, 0644); -- cgit v1.2.3-59-g8ed1b From 39b43b1a61f3c4b540b024843e592b14533aa961 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 12 Dec 2007 19:27:57 -0300 Subject: V4L/DVB (6808): git-dvb: fix build in drivers/media/dvb/frontends/tda18271.h Signed-off-by: Andrew Morton Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/frontends/tda18271.h b/drivers/media/dvb/frontends/tda18271.h index d8400337263b..b98a9331c590 100644 --- a/drivers/media/dvb/frontends/tda18271.h +++ b/drivers/media/dvb/frontends/tda18271.h @@ -38,7 +38,7 @@ extern struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, static inline struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, struct i2c_adapter *i2c, - enum tda18271_i2c_gate gate); + enum tda18271_i2c_gate gate) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); return NULL; -- cgit v1.2.3-59-g8ed1b From 7cd355e7c0c02e499784c77e88720f7cc8f98473 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 12 Dec 2007 19:55:49 -0300 Subject: V4L/DVB (6809): git-dvb: drivers/media/video/et61x251/et61x251_core.c: fix warnings drivers/media/video/et61x251/et61x251_core.c:390: warning: 'et61x251_i2c_read' defined but not used drivers/media/video/et61x251/et61x251_core.c:397: warning: 'et61x251_i2c_write' defined but not used Signed-off-by: Andrew Morton Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/et61x251/et61x251_core.c | 155 +++++++++++++-------------- 1 file changed, 77 insertions(+), 78 deletions(-) diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c index 38d2ad0aadef..06b6a3ae06c4 100644 --- a/drivers/media/video/et61x251/et61x251_core.c +++ b/drivers/media/video/et61x251/et61x251_core.c @@ -268,72 +268,6 @@ et61x251_i2c_wait(struct et61x251_device* cam, } -static int et61x251_i2c_try_read(struct et61x251_device* cam, - const struct et61x251_sensor* sensor, - u8 address) -{ - struct usb_device* udev = cam->usbdev; - u8* data = cam->control_buffer; - int err = 0, res; - - data[0] = address; - data[1] = cam->sensor.i2c_slave_id; - data[2] = cam->sensor.rsta | 0x10; - data[3] = !(et61x251_read_reg(cam, 0x8b) & 0x02); - res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41, - 0, 0x88, data, 4, ET61X251_CTRL_TIMEOUT); - if (res < 0) - err += res; - - err += et61x251_i2c_wait(cam, sensor); - - res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x00, 0xc1, - 0, 0x80, data, 8, ET61X251_CTRL_TIMEOUT); - if (res < 0) - err += res; - - if (err) - DBG(3, "I2C read failed for %s image sensor", sensor->name); - - PDBGG("I2C read: address 0x%02X, value: 0x%02X", address, data[0]); - - return err ? -1 : (int)data[0]; -} - - -static int et61x251_i2c_try_write(struct et61x251_device* cam, - const struct et61x251_sensor* sensor, - u8 address, u8 value) -{ - struct usb_device* udev = cam->usbdev; - u8* data = cam->control_buffer; - int err = 0, res; - - data[0] = address; - data[1] = cam->sensor.i2c_slave_id; - data[2] = cam->sensor.rsta | 0x12; - res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41, - 0, 0x88, data, 3, ET61X251_CTRL_TIMEOUT); - if (res < 0) - err += res; - - data[0] = value; - res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41, - 0, 0x80, data, 1, ET61X251_CTRL_TIMEOUT); - if (res < 0) - err += res; - - err += et61x251_i2c_wait(cam, sensor); - - if (err) - DBG(3, "I2C write failed for %s image sensor", sensor->name); - - PDBGG("I2C write: address 0x%02X, value: 0x%02X", address, value); - - return err ? -1 : 0; -} - - int et61x251_i2c_raw_write(struct et61x251_device* cam, u8 n, u8 data1, u8 data2, u8 data3, u8 data4, u8 data5, u8 data6, u8 data7, @@ -386,18 +320,6 @@ et61x251_i2c_raw_write(struct et61x251_device* cam, u8 n, u8 data1, u8 data2, } -static int et61x251_i2c_read(struct et61x251_device* cam, u8 address) -{ - return et61x251_i2c_try_read(cam, &cam->sensor, address); -} - - -static int et61x251_i2c_write(struct et61x251_device* cam, - u8 address, u8 value) -{ - return et61x251_i2c_try_write(cam, &cam->sensor, address, value); -} - /*****************************************************************************/ static void et61x251_urb_complete(struct urb *urb) @@ -675,6 +597,83 @@ static int et61x251_stream_interrupt(struct et61x251_device* cam) /*****************************************************************************/ #ifdef CONFIG_VIDEO_ADV_DEBUG + +static int et61x251_i2c_try_read(struct et61x251_device* cam, + const struct et61x251_sensor* sensor, + u8 address) +{ + struct usb_device* udev = cam->usbdev; + u8* data = cam->control_buffer; + int err = 0, res; + + data[0] = address; + data[1] = cam->sensor.i2c_slave_id; + data[2] = cam->sensor.rsta | 0x10; + data[3] = !(et61x251_read_reg(cam, 0x8b) & 0x02); + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41, + 0, 0x88, data, 4, ET61X251_CTRL_TIMEOUT); + if (res < 0) + err += res; + + err += et61x251_i2c_wait(cam, sensor); + + res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x00, 0xc1, + 0, 0x80, data, 8, ET61X251_CTRL_TIMEOUT); + if (res < 0) + err += res; + + if (err) + DBG(3, "I2C read failed for %s image sensor", sensor->name); + + PDBGG("I2C read: address 0x%02X, value: 0x%02X", address, data[0]); + + return err ? -1 : (int)data[0]; +} + + +static int et61x251_i2c_try_write(struct et61x251_device* cam, + const struct et61x251_sensor* sensor, + u8 address, u8 value) +{ + struct usb_device* udev = cam->usbdev; + u8* data = cam->control_buffer; + int err = 0, res; + + data[0] = address; + data[1] = cam->sensor.i2c_slave_id; + data[2] = cam->sensor.rsta | 0x12; + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41, + 0, 0x88, data, 3, ET61X251_CTRL_TIMEOUT); + if (res < 0) + err += res; + + data[0] = value; + res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41, + 0, 0x80, data, 1, ET61X251_CTRL_TIMEOUT); + if (res < 0) + err += res; + + err += et61x251_i2c_wait(cam, sensor); + + if (err) + DBG(3, "I2C write failed for %s image sensor", sensor->name); + + PDBGG("I2C write: address 0x%02X, value: 0x%02X", address, value); + + return err ? -1 : 0; +} + +static int et61x251_i2c_read(struct et61x251_device* cam, u8 address) +{ + return et61x251_i2c_try_read(cam, &cam->sensor, address); +} + +static int et61x251_i2c_write(struct et61x251_device* cam, + u8 address, u8 value) +{ + return et61x251_i2c_try_write(cam, &cam->sensor, address, value); +} + static u8 et61x251_strtou8(const char* buff, size_t len, ssize_t* count) { char str[5]; -- cgit v1.2.3-59-g8ed1b From 0991112c1c4625323df8a582de1b2f8609922248 Mon Sep 17 00:00:00 2001 From: Daniel Walker Date: Wed, 12 Dec 2007 18:22:48 -0300 Subject: V4L/DVB (6810): media: video: usbvision: add mutex_unlock() to error paths There are a few error paths which don't unlock the usbvision->lock. So I've added mutex_unlock() calls to fix those paths. Signed-off-by: Daniel Walker Signed-off-by: Andrew Morton Signed-off-by: Thierry MERLE Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/usbvision/usbvision-video.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c index e34f311124e3..d929ced58ec3 100644 --- a/drivers/media/video/usbvision/usbvision-video.c +++ b/drivers/media/video/usbvision/usbvision-video.c @@ -1290,6 +1290,7 @@ static int usbvision_radio_open(struct inode *inode, struct file *file) errCode = usbvision_set_alternate(usbvision); if (errCode < 0) { usbvision->last_error = errCode; + mutex_unlock(&usbvision->lock); return -EBUSY; } @@ -1807,6 +1808,7 @@ static int __devinit usbvision_probe(struct usb_interface *intf, usbvision->num_alt,GFP_KERNEL); if (usbvision->alt_max_pkt_size == NULL) { err("usbvision: out of memory!\n"); + mutex_unlock(&usbvision->lock); return -ENOMEM; } -- cgit v1.2.3-59-g8ed1b From 544e6175330c86ad87abeeb1b048f56bafd96c31 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 12 Dec 2007 18:25:23 -0300 Subject: V4L/DVB (6811): media-video-usbvision-add-mutex_unlock-to-error-paths-fix Signed-off-by: Andrew Morton Signed-off-by: Thierry MERLE Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/usbvision/usbvision-video.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c index d929ced58ec3..92e72910792b 100644 --- a/drivers/media/video/usbvision/usbvision-video.c +++ b/drivers/media/video/usbvision/usbvision-video.c @@ -1290,8 +1290,8 @@ static int usbvision_radio_open(struct inode *inode, struct file *file) errCode = usbvision_set_alternate(usbvision); if (errCode < 0) { usbvision->last_error = errCode; - mutex_unlock(&usbvision->lock); - return -EBUSY; + errCode = -EBUSY; + goto out; } // If so far no errors then we shall start the radio @@ -1308,6 +1308,7 @@ static int usbvision_radio_open(struct inode *inode, struct file *file) usbvision->initialized = 0; } } +out: mutex_unlock(&usbvision->lock); return errCode; } -- cgit v1.2.3-59-g8ed1b From 1fe934ddfc8e6e5663c0308ae216219be87b8d4f Mon Sep 17 00:00:00 2001 From: Daniel Walker Date: Wed, 12 Dec 2007 18:37:54 -0300 Subject: V4L/DVB (6812): media: video: usbvision: remove ctrlUrbLock The ctrlUrbLock has all it's users commented out, and so it's unused. This patch removes it. Signed-off-by: Daniel Walker Signed-off-by: Andrew Morton Signed-off-by: Thierry MERLE Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/usbvision/usbvision-core.c | 3 --- drivers/media/video/usbvision/usbvision-video.c | 1 - drivers/media/video/usbvision/usbvision.h | 1 - 3 files changed, 5 deletions(-) diff --git a/drivers/media/video/usbvision/usbvision-core.c b/drivers/media/video/usbvision/usbvision-core.c index 2038d409f1dc..9e404b87d000 100644 --- a/drivers/media/video/usbvision/usbvision-core.c +++ b/drivers/media/video/usbvision/usbvision-core.c @@ -1561,13 +1561,10 @@ static int usbvision_write_reg_irq(struct usb_usbvision *usbvision,int address, if (len > 8) { return -EFAULT; } -// down(&usbvision->ctrlUrbLock); if (usbvision->ctrlUrbBusy) { -// up(&usbvision->ctrlUrbLock); return -EBUSY; } usbvision->ctrlUrbBusy = 1; -// up(&usbvision->ctrlUrbLock); usbvision->ctrlUrbSetup.bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT; usbvision->ctrlUrbSetup.bRequest = USBVISION_OP_CODE; diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c index 92e72910792b..b52b826a30be 100644 --- a/drivers/media/video/usbvision/usbvision-video.c +++ b/drivers/media/video/usbvision/usbvision-video.c @@ -1651,7 +1651,6 @@ static struct usb_usbvision *usbvision_alloc(struct usb_device *dev) goto err_exit; } init_waitqueue_head(&usbvision->ctrlUrb_wq); - init_MUTEX(&usbvision->ctrlUrbLock); /* to 1 == available */ usbvision_init_powerOffTimer(usbvision); diff --git a/drivers/media/video/usbvision/usbvision.h b/drivers/media/video/usbvision/usbvision.h index dd80a98780f2..20d7ec624999 100644 --- a/drivers/media/video/usbvision/usbvision.h +++ b/drivers/media/video/usbvision/usbvision.h @@ -370,7 +370,6 @@ struct usb_usbvision { int ctrlUrbBusy; struct usb_ctrlrequest ctrlUrbSetup; wait_queue_head_t ctrlUrb_wq; // Processes waiting - struct semaphore ctrlUrbLock; /* configuration part */ int have_tuner; -- cgit v1.2.3-59-g8ed1b From 6c2f990105acd360e83b95b41c60ed8bf25e67fe Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Dec 2007 13:30:14 -0300 Subject: V4L/DVB (6815): Fix vivi internal debug messages Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/vivi.c | 109 ++++++++++++++++++++++++++++----------------- 1 file changed, 67 insertions(+), 42 deletions(-) diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index 889e6611e039..0346d1af3e62 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -54,7 +54,6 @@ /* Declare static vars that will be used as parameters */ static unsigned int vid_limit = 16; /* Video memory limit, in Mb */ -static struct video_device vivi; /* Video device */ static int video_nr = -1; /* /dev/videoN, -1 for autodetect */ static int n_devs = 1; /* Number of virtual devices */ @@ -110,9 +109,9 @@ static struct v4l2_queryctrl vivi_qctrl[] = { static int qctl_regs[ARRAY_SIZE(vivi_qctrl)]; -#define dprintk(level, fmt, arg...) \ +#define dprintk(dev, level, fmt, arg...) \ do { \ - if (vivi.debug >= (level)) \ + if (dev->vfd->debug >= (level)) \ printk(KERN_DEBUG "vivi: " fmt , ## arg); \ } while (0) @@ -338,7 +337,7 @@ static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf) dev->timestr); /* FIXME: replacing to __copy_to_user */ if (copy_to_user(vbuf + pos, tmpbuf, wmax * 2) != 0) - dprintk(2, "vivifill copy_to_user failed.\n"); + dprintk(dev, 2, "vivifill copy_to_user failed.\n"); pos += wmax*2; } @@ -367,8 +366,8 @@ static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf) sprintf(dev->timestr, "%02d:%02d:%02d:%03d", dev->h, dev->m, dev->s, (dev->us + 500) / 1000); - dprintk(2, "vivifill at %s: Buffer 0x%08lx size= %d\n", dev->timestr, - (unsigned long)tmpbuf, pos); + dprintk(dev, 2, "vivifill at %s: Buffer 0x%08lx size= %d\n", + dev->timestr, (unsigned long)tmpbuf, pos); /* Advice that buffer was filled */ buf->vb.state = VIDEOBUF_DONE; @@ -392,7 +391,7 @@ static void vivi_thread_tick(struct vivi_dmaqueue *dma_q) /* Announces videobuf that all went ok */ for (bc = 0;; bc++) { if (list_empty(&dma_q->active)) { - dprintk(1, "No active queue to serve\n"); + dprintk(dev, 1, "No active queue to serve\n"); break; } @@ -406,7 +405,7 @@ static void vivi_thread_tick(struct vivi_dmaqueue *dma_q) } do_gettimeofday(&buf->vb.ts); - dprintk(2, "[%p/%d] wakeup\n", buf, buf->vb. i); + dprintk(dev, 2, "[%p/%d] wakeup\n", buf, buf->vb. i); /* Fill buffer */ vivi_fillbuff(dev, buf); @@ -418,16 +417,18 @@ static void vivi_thread_tick(struct vivi_dmaqueue *dma_q) } } if (bc != 1) - dprintk(1, "%s: %d buffers handled (should be 1)\n", + dprintk(dev, 1, "%s: %d buffers handled (should be 1)\n", __FUNCTION__, bc); } static void vivi_sleep(struct vivi_dmaqueue *dma_q) { + struct vivi_dev *dev = container_of(dma_q, struct vivi_dev, vidq); int timeout; DECLARE_WAITQUEUE(wait, current); - dprintk(1, "%s dma_q=0x%08lx\n", __FUNCTION__, (unsigned long)dma_q); + dprintk(dev, 1, "%s dma_q=0x%08lx\n", __FUNCTION__, + (unsigned long)dma_q); add_wait_queue(&dma_q->wq, &wait); if (!kthread_should_stop()) { @@ -450,11 +451,12 @@ static void vivi_sleep(struct vivi_dmaqueue *dma_q) WAKE_NUMERATOR * 1000) / WAKE_DENOMINATOR) - jiffies; - dprintk(1, "underrun, losed %d frames. " + dprintk(dev, 1, "underrun, losed %d frames. " "Now, frame is %d. Waking on %d jiffies\n", dma_q->frame-old, dma_q->frame, timeout); } else - dprintk(1, "will sleep for %i jiffies\n", timeout); + dprintk(dev, 1, "will sleep for %i jiffies\n", + timeout); vivi_thread_tick(dma_q); @@ -468,8 +470,9 @@ static void vivi_sleep(struct vivi_dmaqueue *dma_q) static int vivi_thread(void *data) { struct vivi_dmaqueue *dma_q = data; + struct vivi_dev *dev = container_of(dma_q, struct vivi_dev, vidq); - dprintk(1, "thread started\n"); + dprintk(dev, 1, "thread started\n"); mod_timer(&dma_q->timeout, jiffies+BUFFER_TIMEOUT); set_freezable(); @@ -480,16 +483,18 @@ static int vivi_thread(void *data) if (kthread_should_stop()) break; } - dprintk(1, "thread: exit\n"); + dprintk(dev, 1, "thread: exit\n"); return 0; } static int vivi_start_thread(struct vivi_dmaqueue *dma_q) { + struct vivi_dev *dev = container_of(dma_q, struct vivi_dev, vidq); + dma_q->frame = 0; dma_q->ini_jiffies = jiffies; - dprintk(1, "%s\n", __FUNCTION__); + dprintk(dev, 1, "%s\n", __FUNCTION__); dma_q->kthread = kthread_run(vivi_thread, dma_q, "vivi"); @@ -500,13 +505,15 @@ static int vivi_start_thread(struct vivi_dmaqueue *dma_q) /* Wakes thread */ wake_up_interruptible(&dma_q->wq); - dprintk(1, "returning from %s\n", __FUNCTION__); + dprintk(dev, 1, "returning from %s\n", __FUNCTION__); return 0; } static void vivi_stop_thread(struct vivi_dmaqueue *dma_q) { - dprintk(1, "%s\n", __FUNCTION__); + struct vivi_dev *dev = container_of(dma_q, struct vivi_dev, vidq); + + dprintk(dev, 1, "%s\n", __FUNCTION__); /* shutdown control thread */ if (dma_q->kthread) { kthread_stop(dma_q->kthread); @@ -516,17 +523,19 @@ static void vivi_stop_thread(struct vivi_dmaqueue *dma_q) static int restart_video_queue(struct vivi_dmaqueue *dma_q) { + struct vivi_dev *dev = container_of(dma_q, struct vivi_dev, vidq); struct vivi_buffer *buf, *prev; - dprintk(1, "%s dma_q=0x%08lx\n", __FUNCTION__, (unsigned long)dma_q); + dprintk(dev, 1, "%s dma_q=0x%08lx\n", __FUNCTION__, + (unsigned long)dma_q); if (!list_empty(&dma_q->active)) { buf = list_entry(dma_q->active.next, struct vivi_buffer, vb.queue); - dprintk(2, "restart_queue [%p/%d]: restart dma\n", + dprintk(dev, 2, "restart_queue [%p/%d]: restart dma\n", buf, buf->vb.i); - dprintk(1, "Restarting video dma\n"); + dprintk(dev, 1, "Restarting video dma\n"); vivi_stop_thread(dma_q); /* cancel all outstanding capture / vbi requests */ @@ -550,13 +559,14 @@ static int restart_video_queue(struct vivi_dmaqueue *dma_q) list_del(&buf->vb.queue); list_add_tail(&buf->vb.queue, &dma_q->active); - dprintk(1, "Restarting video dma\n"); + dprintk(dev, 1, "Restarting video dma\n"); vivi_stop_thread(dma_q); vivi_start_thread(dma_q); buf->vb.state = VIDEOBUF_ACTIVE; mod_timer(&dma_q->timeout, jiffies+BUFFER_TIMEOUT); - dprintk(2, "[%p/%d] restart_queue - first active\n", + dprintk(dev, 2, + "[%p/%d] restart_queue - first active\n", buf, buf->vb.i); } else if (prev->vb.width == buf->vb.width && @@ -565,7 +575,8 @@ static int restart_video_queue(struct vivi_dmaqueue *dma_q) list_del(&buf->vb.queue); list_add_tail(&buf->vb.queue, &dma_q->active); buf->vb.state = VIDEOBUF_ACTIVE; - dprintk(2, "[%p/%d] restart_queue - move to active\n", + dprintk(dev, 2, + "[%p/%d] restart_queue - move to active\n", buf, buf->vb.i); } else { return 0; @@ -598,7 +609,8 @@ static void vivi_vid_timeout(unsigned long data) static int buffer_setup(struct videobuf_queue *vq, unsigned int *count, unsigned int *size) { - struct vivi_fh *fh = vq->priv_data; + struct vivi_fh *fh = vq->priv_data; + struct vivi_dev *dev = fh->dev; *size = fh->width*fh->height*2; @@ -608,14 +620,18 @@ buffer_setup(struct videobuf_queue *vq, unsigned int *count, unsigned int *size) while (*size * *count > vid_limit * 1024 * 1024) (*count)--; - dprintk(1, "%s, count=%d, size=%d\n", __FUNCTION__, *count, *size); + dprintk(dev, 1, "%s, count=%d, size=%d\n", __FUNCTION__, + *count, *size); return 0; } static void free_buffer(struct videobuf_queue *vq, struct vivi_buffer *buf) { - dprintk(1, "%s\n", __FUNCTION__); + struct vivi_fh *fh = vq->priv_data; + struct vivi_dev *dev = fh->dev; + + dprintk(dev, 1, "%s\n", __FUNCTION__); if (in_interrupt()) BUG(); @@ -632,10 +648,11 @@ buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, enum v4l2_field field) { struct vivi_fh *fh = vq->priv_data; + struct vivi_dev *dev = fh->dev; struct vivi_buffer *buf = container_of(vb, struct vivi_buffer, vb); int rc, init_buffer = 0; - dprintk(1, "%s, field=%d\n", __FUNCTION__, field); + dprintk(dev, 1, "%s, field=%d\n", __FUNCTION__, field); BUG_ON(NULL == fh->fmt); if (fh->width < 48 || fh->width > norm_maxw() || @@ -681,18 +698,18 @@ buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) struct vivi_buffer *prev; if (!list_empty(&vidq->queued)) { - dprintk(1, "adding vb queue=0x%08lx\n", + dprintk(dev, 1, "adding vb queue=0x%08lx\n", (unsigned long)&buf->vb.queue); list_add_tail(&buf->vb.queue, &vidq->queued); buf->vb.state = VIDEOBUF_QUEUED; - dprintk(2, "[%p/%d] buffer_queue - append to queued\n", + dprintk(dev, 2, "[%p/%d] buffer_queue - append to queued\n", buf, buf->vb.i); } else if (list_empty(&vidq->active)) { list_add_tail(&buf->vb.queue, &vidq->active); buf->vb.state = VIDEOBUF_ACTIVE; mod_timer(&vidq->timeout, jiffies+BUFFER_TIMEOUT); - dprintk(2, "[%p/%d] buffer_queue - first active\n", + dprintk(dev, 2, "[%p/%d] buffer_queue - first active\n", buf, buf->vb.i); vivi_start_thread(vidq); @@ -704,13 +721,15 @@ buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) prev->fmt == buf->fmt) { list_add_tail(&buf->vb.queue, &vidq->active); buf->vb.state = VIDEOBUF_ACTIVE; - dprintk(2, "[%p/%d] buffer_queue - append to active\n", + dprintk(dev, 2, + "[%p/%d] buffer_queue - append to active\n", buf, buf->vb.i); } else { list_add_tail(&buf->vb.queue, &vidq->queued); buf->vb.state = VIDEOBUF_QUEUED; - dprintk(2, "[%p/%d] buffer_queue - first queued\n", + dprintk(dev, 2, + "[%p/%d] buffer_queue - first queued\n", buf, buf->vb.i); } } @@ -724,7 +743,7 @@ static void buffer_release(struct videobuf_queue *vq, struct vivi_dev *dev = (struct vivi_dev *)fh->dev; struct vivi_dmaqueue *vidq = &dev->vidq; - dprintk(1, "%s\n", __FUNCTION__); + dprintk(dev, 1, "%s\n", __FUNCTION__); vivi_stop_thread(vidq); @@ -784,13 +803,16 @@ static int vidioc_g_fmt_cap(struct file *file, void *priv, static int vidioc_try_fmt_cap(struct file *file, void *priv, struct v4l2_format *f) { + struct vivi_fh *fh = priv; + struct vivi_dev *dev = fh->dev; struct vivi_fmt *fmt; enum v4l2_field field; unsigned int maxw, maxh; if (format.fourcc != f->fmt.pix.pixelformat) { - dprintk(1, "Fourcc format (0x%08x) invalid. Driver accepts " - "only 0x%08x\n", f->fmt.pix.pixelformat, format.fourcc); + dprintk(dev, 1, "Fourcc format (0x%08x) invalid. " + "Driver accepts only 0x%08x\n", + f->fmt.pix.pixelformat, format.fourcc); return -EINVAL; } fmt = &format; @@ -800,7 +822,7 @@ static int vidioc_try_fmt_cap(struct file *file, void *priv, if (field == V4L2_FIELD_ANY) { field = V4L2_FIELD_INTERLACED; } else if (V4L2_FIELD_INTERLACED != field) { - dprintk(1, "Field type invalid.\n"); + dprintk(dev, 1, "Field type invalid.\n"); return -EINVAL; } @@ -1009,7 +1031,7 @@ found: /* If more than one user, mutex should be added */ dev->users++; - dprintk(1, "open minor=%d type=%s users=%d\n", minor, + dprintk(dev, 1, "open minor=%d type=%s users=%d\n", minor, v4l2_type_names[V4L2_BUF_TYPE_VIDEO_CAPTURE], dev->users); /* allocate + initialize per filehandle data */ @@ -1064,9 +1086,10 @@ static unsigned int vivi_poll(struct file *file, struct poll_table_struct *wait) { struct vivi_fh *fh = file->private_data; + struct vivi_dev *dev = fh->dev; struct videobuf_queue *q = &fh->vb_vidq; - dprintk(1, "%s\n", __FUNCTION__); + dprintk(dev, 1, "%s\n", __FUNCTION__); if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type) return POLLERR; @@ -1090,7 +1113,8 @@ static int vivi_close(struct inode *inode, struct file *file) dev->users--; - dprintk(1, "close called (minor=%d, users=%d)\n", minor, dev->users); + dprintk(dev, 1, "close called (minor=%d, users=%d)\n", + minor, dev->users); return 0; } @@ -1118,14 +1142,15 @@ static int vivi_release(void) static int vivi_mmap(struct file *file, struct vm_area_struct *vma) { - struct vivi_fh *fh = file->private_data; + struct vivi_fh *fh = file->private_data; + struct vivi_dev *dev = fh->dev; int ret; - dprintk(1, "mmap called, vma=0x%08lx\n", (unsigned long)vma); + dprintk(dev, 1, "mmap called, vma=0x%08lx\n", (unsigned long)vma); ret = videobuf_mmap_mapper(&fh->vb_vidq, vma); - dprintk(1, "vma start=0x%08lx, size=%ld, ret=%d\n", + dprintk(dev, 1, "vma start=0x%08lx, size=%ld, ret=%d\n", (unsigned long)vma->vm_start, (unsigned long)vma->vm_end-(unsigned long)vma->vm_start, ret); -- cgit v1.2.3-59-g8ed1b From 55862ac9b2e656c35ab1e25d9b162e5bda81281f Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Dec 2007 16:13:37 -0300 Subject: V4L/DVB (6816): Add proper locking for buffer filling Avoids de-alocating buffers before finishing to fill a buffer Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/vivi.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index 0346d1af3e62..004209d54498 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -163,6 +163,7 @@ struct vivi_dev { struct list_head vivi_devlist; struct mutex lock; + spinlock_t slock; int users; @@ -388,6 +389,7 @@ static void vivi_thread_tick(struct vivi_dmaqueue *dma_q) int bc; + spin_lock(&dev->slock); /* Announces videobuf that all went ok */ for (bc = 0;; bc++) { if (list_empty(&dma_q->active)) { @@ -401,6 +403,7 @@ static void vivi_thread_tick(struct vivi_dmaqueue *dma_q) /* Nobody is waiting something to be done, just return */ if (!waitqueue_active(&buf->vb.done)) { mod_timer(&dma_q->timeout, jiffies+BUFFER_TIMEOUT); + spin_unlock(&dev->slock); return; } @@ -419,6 +422,7 @@ static void vivi_thread_tick(struct vivi_dmaqueue *dma_q) if (bc != 1) dprintk(dev, 1, "%s: %d buffers handled (should be 1)\n", __FUNCTION__, bc); + spin_unlock(&dev->slock); } static void vivi_sleep(struct vivi_dmaqueue *dma_q) @@ -591,6 +595,8 @@ static void vivi_vid_timeout(unsigned long data) struct vivi_dmaqueue *vidq = &dev->vidq; struct vivi_buffer *buf; + spin_lock(&dev->slock); + while (!list_empty(&vidq->active)) { buf = list_entry(vidq->active.next, struct vivi_buffer, vb.queue); @@ -599,8 +605,9 @@ static void vivi_vid_timeout(unsigned long data) wake_up(&buf->vb.done); printk(KERN_INFO "vivi/0: [%p/%d] timeout\n", buf, buf->vb.i); } - restart_video_queue(vidq); + + spin_unlock(&dev->slock); } /* ------------------------------------------------------------------ @@ -1064,7 +1071,7 @@ found: dev->h, dev->m, dev->s, (dev->us + 500) / 1000); videobuf_queue_vmalloc_init(&fh->vb_vidq, &vivi_video_qops, - NULL, NULL, fh->type, V4L2_FIELD_INTERLACED, + NULL, &dev->slock, fh->type, V4L2_FIELD_INTERLACED, sizeof(struct vivi_buffer), fh); return 0; @@ -1224,6 +1231,7 @@ static int __init vivi_init(void) /* initialize locks */ mutex_init(&dev->lock); + spin_lock_init(&dev->slock); dev->vidq.timeout.function = vivi_vid_timeout; dev->vidq.timeout.data = (unsigned long)dev; -- cgit v1.2.3-59-g8ed1b From 6594ad829a98d5a9fe720d8d182a4e50fc81953a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Dec 2007 16:15:41 -0300 Subject: V4L/DVB (6817): Cleanup kernel thread and provide overrun detection The previous code were a little bit messy. Cleans it up. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/vivi.c | 73 ++++++++++++++++++++++++++-------------------- 1 file changed, 41 insertions(+), 32 deletions(-) diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index 004209d54498..c9d23633fe42 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -425,48 +425,57 @@ static void vivi_thread_tick(struct vivi_dmaqueue *dma_q) spin_unlock(&dev->slock); } +#define frames_to_ms(frames) \ + ((frames * WAKE_NUMERATOR * 1000) / WAKE_DENOMINATOR) + static void vivi_sleep(struct vivi_dmaqueue *dma_q) { struct vivi_dev *dev = container_of(dma_q, struct vivi_dev, vidq); - int timeout; + int timeout, running_time; DECLARE_WAITQUEUE(wait, current); dprintk(dev, 1, "%s dma_q=0x%08lx\n", __FUNCTION__, (unsigned long)dma_q); add_wait_queue(&dma_q->wq, &wait); - if (!kthread_should_stop()) { - dma_q->frame++; - - /* Calculate time to wake up */ - timeout = dma_q->ini_jiffies+ - msecs_to_jiffies((dma_q->frame*WAKE_NUMERATOR * 1000) - / WAKE_DENOMINATOR) - jiffies; - - if (timeout <= 0) { - int old = dma_q->frame; - dma_q->frame = (jiffies_to_msecs(jiffies - - dma_q->ini_jiffies) * - WAKE_DENOMINATOR) / - (WAKE_NUMERATOR * 1000) + 1; - - timeout = dma_q->ini_jiffies+ - msecs_to_jiffies((dma_q->frame * - WAKE_NUMERATOR * 1000) - / WAKE_DENOMINATOR) - jiffies; - - dprintk(dev, 1, "underrun, losed %d frames. " - "Now, frame is %d. Waking on %d jiffies\n", - dma_q->frame-old, dma_q->frame, timeout); - } else - dprintk(dev, 1, "will sleep for %i jiffies\n", - timeout); - - vivi_thread_tick(dma_q); - - schedule_timeout_interruptible(timeout); - } + if (kthread_should_stop()) + goto stop_task; + + running_time = jiffies - dma_q->ini_jiffies; + dma_q->frame++; + + /* Calculate time to wake up */ + timeout = msecs_to_jiffies(frames_to_ms(dma_q->frame)) - running_time; + + if (timeout > msecs_to_jiffies(frames_to_ms(2)) || timeout <= 0) { + int old = dma_q->frame; + int nframes; + + dma_q->frame = (jiffies_to_msecs(running_time) / + frames_to_ms(1)) + 1; + + timeout = msecs_to_jiffies(frames_to_ms(dma_q->frame)) + - running_time; + + if (unlikely (timeout <= 0)) + timeout = 1; + + nframes = (dma_q->frame > old)? + dma_q->frame - old : old - dma_q->frame; + + dprintk(dev, 1, "%ld: %s %d frames. " + "Current frame is %d. Will sleep for %d jiffies\n", + jiffies, + (dma_q->frame > old)? "Underrun, losed" : "Overrun of", + nframes, dma_q->frame, timeout); + } else + dprintk(dev, 1, "will sleep for %d jiffies\n", timeout); + + vivi_thread_tick(dma_q); + + schedule_timeout_interruptible(timeout); +stop_task: remove_wait_queue(&dma_q->wq, &wait); try_to_freeze(); } -- cgit v1.2.3-59-g8ed1b From 18ff605a18b29ab1b52d31f96e2ecbaf7a042a3e Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 12 Dec 2007 21:43:57 -0300 Subject: V4L/DVB (6818): git-dvb: drivers/media/dvb/frontends/zl10353.c: avoid 64-bit divide Signed-off-by: Andrew Morton Acked-by: Chris Pascoe Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/zl10353.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/frontends/zl10353.c b/drivers/media/dvb/frontends/zl10353.c index 091fbcced006..e874ec8df60c 100644 --- a/drivers/media/dvb/frontends/zl10353.c +++ b/drivers/media/dvb/frontends/zl10353.c @@ -144,7 +144,8 @@ static void zl10353_calc_nominal_rate(struct dvb_frontend *fe, break; } - value = (bw * (u64)10 * (1 << 23) / 7 * 125 + adc_clock / 2); + value = (u64)10 * (1 << 23) / 7 * 125; + value = (bw * value) + adc_clock / 2; do_div(value, adc_clock); *nominal_rate = value; -- cgit v1.2.3-59-g8ed1b From 2b03238a79295aff30afc3d9a82afa617fd33971 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Thu, 13 Dec 2007 10:04:10 -0300 Subject: V4L/DVB (6821): s5h1409: fix IF frequency configuration On the s5h1409 demod, the IF frequency for VSB is limited to 44 / 5.38 MHz. Hardcode VSB IF frequency within the driver to 44 / 5.38 MHz. QAM IF frequency remains configurable via attach-time configuration. Acked-by: Steven Toth Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/s5h1409.c | 14 +++++++++++++- drivers/media/dvb/frontends/s5h1409.h | 4 ++-- drivers/media/video/cx23885/cx23885-dvb.c | 4 ++-- 3 files changed, 17 insertions(+), 5 deletions(-) diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c index 562d9208857a..b80a3ee91ba4 100644 --- a/drivers/media/dvb/frontends/s5h1409.c +++ b/drivers/media/dvb/frontends/s5h1409.c @@ -42,6 +42,7 @@ struct s5h1409_state { fe_modulation_t current_modulation; u32 current_frequency; + int if_freq; u32 is_qam_locked; u32 qam_state; @@ -348,6 +349,9 @@ static int s5h1409_softreset(struct dvb_frontend* fe) return 0; } +#define S5H1409_VSB_IF_FREQ 5380 +#define S5H1409_QAM_IF_FREQ state->config->qam_if + static int s5h1409_set_if_freq(struct dvb_frontend* fe, int KHz) { struct s5h1409_state* state = fe->demodulator_priv; @@ -369,6 +373,9 @@ static int s5h1409_set_if_freq(struct dvb_frontend* fe, int KHz) ret = -1; } + if (0 == ret) + state->if_freq = KHz; + return ret; } @@ -394,11 +401,15 @@ static int s5h1409_enable_modulation(struct dvb_frontend* fe, switch(m) { case VSB_8: dprintk("%s() VSB_8\n", __FUNCTION__); + if (state->if_freq != S5H1409_VSB_IF_FREQ) + s5h1409_set_if_freq(fe, S5H1409_VSB_IF_FREQ); s5h1409_writereg(state, 0xf4, 0); break; case QAM_64: case QAM_256: dprintk("%s() QAM_AUTO (64/256)\n", __FUNCTION__); + if (state->if_freq != S5H1409_QAM_IF_FREQ) + s5h1409_set_if_freq(fe, S5H1409_QAM_IF_FREQ); s5h1409_writereg(state, 0xf4, 1); s5h1409_writereg(state, 0x85, 0x110); break; @@ -571,7 +582,7 @@ static int s5h1409_init (struct dvb_frontend* fe) s5h1409_writereg(state, 0xab, 0x0); /* Parallel */ s5h1409_set_spectralinversion(fe, state->config->inversion); - s5h1409_set_if_freq(fe, state->config->if_freq); + s5h1409_set_if_freq(fe, state->if_freq); s5h1409_set_gpio(fe, state->config->gpio); s5h1409_softreset(fe); @@ -751,6 +762,7 @@ struct dvb_frontend* s5h1409_attach(const struct s5h1409_config* config, state->config = config; state->i2c = i2c; state->current_modulation = 0; + state->if_freq = S5H1409_VSB_IF_FREQ; /* check if the demod exists */ if (s5h1409_readreg(state, 0x04) != 0x0066) diff --git a/drivers/media/dvb/frontends/s5h1409.h b/drivers/media/dvb/frontends/s5h1409.h index 20f9af1af445..b1f433906664 100644 --- a/drivers/media/dvb/frontends/s5h1409.h +++ b/drivers/media/dvb/frontends/s5h1409.h @@ -39,8 +39,8 @@ struct s5h1409_config #define S5H1409_GPIO_ON 1 u8 gpio; - /* IF Freq in KHz */ - u16 if_freq; + /* IF Freq for QAM in KHz, VSB is hardcoded to 5380 */ + u16 qam_if; /* Spectral Inversion */ #define S5H1409_INVERSION_OFF 0 diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index eda8c05d0931..96d732098a0d 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -85,7 +85,7 @@ static struct s5h1409_config hauppauge_generic_config = { .demod_address = 0x32 >> 1, .output_mode = S5H1409_SERIAL_OUTPUT, .gpio = S5H1409_GPIO_ON, - .if_freq = 44000, + .qam_if = 44000, .inversion = S5H1409_INVERSION_OFF, .status_mode = S5H1409_DEMODLOCKING }; @@ -94,7 +94,7 @@ static struct s5h1409_config hauppauge_hvr1800lp_config = { .demod_address = 0x32 >> 1, .output_mode = S5H1409_SERIAL_OUTPUT, .gpio = S5H1409_GPIO_OFF, - .if_freq = 44000, + .qam_if = 44000, .inversion = S5H1409_INVERSION_OFF, .status_mode = S5H1409_DEMODLOCKING }; -- cgit v1.2.3-59-g8ed1b From 6b7daa88f23bb23f61977063e3f8ea9598e65e32 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Thu, 13 Dec 2007 10:11:49 -0300 Subject: V4L/DVB (6822): s5h1409: use VSB IF frequency ( 44 / 5.38 MHz ) unless otherwise specified use VSB IF frequency ( 44 / 5.38 MHz ) if qam_if is invalid or unspecified Acked-by: Steven Toth Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/s5h1409.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c index b80a3ee91ba4..d3b148ddad2b 100644 --- a/drivers/media/dvb/frontends/s5h1409.c +++ b/drivers/media/dvb/frontends/s5h1409.c @@ -355,28 +355,26 @@ static int s5h1409_softreset(struct dvb_frontend* fe) static int s5h1409_set_if_freq(struct dvb_frontend* fe, int KHz) { struct s5h1409_state* state = fe->demodulator_priv; - int ret = 0; dprintk("%s(%d KHz)\n", __FUNCTION__, KHz); - if( (KHz == 44000) || (KHz == 5380) ) { - s5h1409_writereg(state, 0x87, 0x01be); - s5h1409_writereg(state, 0x88, 0x0436); - s5h1409_writereg(state, 0x89, 0x054d); - } else - if (KHz == 4000) { + switch (KHz) { + case 4000: s5h1409_writereg(state, 0x87, 0x014b); s5h1409_writereg(state, 0x88, 0x0cb5); s5h1409_writereg(state, 0x89, 0x03e2); - } else { - printk("%s() Invalid arg = %d KHz\n", __FUNCTION__, KHz); - ret = -1; + break; + case 5380: + case 44000: + default: + s5h1409_writereg(state, 0x87, 0x01be); + s5h1409_writereg(state, 0x88, 0x0436); + s5h1409_writereg(state, 0x89, 0x054d); + break; } + state->if_freq = KHz; - if (0 == ret) - state->if_freq = KHz; - - return ret; + return 0; } static int s5h1409_set_spectralinversion(struct dvb_frontend* fe, int inverted) -- cgit v1.2.3-59-g8ed1b From 4bfae52b69360a966f41ba3308e57a6df41ff8e1 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 16 Dec 2007 09:24:30 -0300 Subject: V4L/DVB (6827): Auto-selects D2633 for ATSC ATSC standard-specific firmware is D2633 on both v2.5 and v2.7. Better to auto-select this firmware, overriding ctrl.d2633. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-xc2028.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/media/video/tuner-xc2028.c b/drivers/media/video/tuner-xc2028.c index 7acc175d805a..fd248a19c259 100644 --- a/drivers/media/video/tuner-xc2028.c +++ b/drivers/media/video/tuner-xc2028.c @@ -970,7 +970,10 @@ static int xc2028_set_params(struct dvb_frontend *fe, break; case FE_ATSC: bw = BANDWIDTH_6_MHZ; + /* The only ATSC firmware (at least on v2.7) is D2633, + so overrides ctrl->d2633 */ type |= ATSC| D2633; + type &= ~D2620; break; /* DVB-S is not supported */ default: -- cgit v1.2.3-59-g8ed1b From f9e54e0c84da869ad9bc372fb4eab26d558dbfc2 Mon Sep 17 00:00:00 2001 From: Jelle Foks Date: Mon, 21 May 2007 14:36:01 -0300 Subject: V4L/DVB (6828): cx88-blackbird: audio improvements This patch should fix the 'muted audio' and 'raspy audio' problem for mpeg2 streams out of cx88-blackbird devices. Especially mythtv users would find that the audio would often sound bad (aliased, or 'raspy'), mainly related to channel changes, many (all?) other users would find that there was no audio at all in the mpeg data from the encoder chip, unless the audio was manually unmuted. The patch includes the following modifications: Don't actually start the mpeg2 encoder until the device is read from by the application. Wait until the audio is stable for at least 400ms before starting the mpeg encoder. Mute/Unmute the audio when starting/stopping the mpeg encoder. Stop the mpeg encoder when changing parameters and when changing tuner frequency. Add a variable 'mpeg_active' to struct cx8802_dev to allow tracking of whether or not the mpeg2 encoder is active. Load the firmware on cx88-blackbird driver load. Signed-off-by: Jelle Foks Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88-blackbird.c | 89 ++++++++++++++++++++++++------- drivers/media/video/cx88/cx88.h | 1 + 2 files changed, 70 insertions(+), 20 deletions(-) diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index f802b5653569..7ce37f46b753 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -536,6 +536,9 @@ static int blackbird_initialize_codec(struct cx8802_dev *dev) dprintk(1,"Initialize codec\n"); retval = blackbird_api_cmd(dev, CX2341X_ENC_PING_FW, 0, 0); /* ping */ if (retval < 0) { + + dev->mpeg_active = 0; + /* ping was not successful, reset and upload firmware */ cx_write(MO_SRST_IO, 0); /* SYS_RSTO=0 */ msleep(1); @@ -572,38 +575,80 @@ static int blackbird_initialize_codec(struct cx8802_dev *dev) blackbird_codec_settings(dev); msleep(1); - /* blackbird_api_cmd(dev, IVTV_API_ASSIGN_NUM_VSYNC_LINES, 4, 0, 0xef, 0xef); - blackbird_api_cmd(dev, IVTV_API_ASSIGN_NUM_VSYNC_LINES, 4, 0, 0xf0, 0xf0); - blackbird_api_cmd(dev, IVTV_API_ASSIGN_NUM_VSYNC_LINES, 4, 0, 0x180, 0x180); */ blackbird_api_cmd(dev, CX2341X_ENC_SET_NUM_VSYNC_LINES, 2, 0, BLACKBIRD_FIELD1_SAA7115, BLACKBIRD_FIELD2_SAA7115 ); - /* blackbird_api_cmd(dev, IVTV_API_ASSIGN_PLACEHOLDER, 12, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0); */ blackbird_api_cmd(dev, CX2341X_ENC_SET_PLACEHOLDER, 12, 0, BLACKBIRD_CUSTOM_EXTENSION_USR_DATA, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0); - /* initialize the video input */ - blackbird_api_cmd(dev, CX2341X_ENC_INITIALIZE_INPUT, 0, 0); - msleep(1); + return 0; +} + +static int blackbird_start_codec(struct file *file, void *priv) +{ + struct cx8802_dev *dev = ((struct cx8802_fh *)priv)->dev; + struct cx88_core *core = dev->core; + /* start capturing to the host interface */ + u32 reg; + + int i; + int lastchange = -1; + int lastval = 0; + + for (i=0; (i < 10) && (i < (lastchange + 4)); i++) + { + reg = cx_read(AUD_STATUS); + + dprintk(1,"AUD_STATUS:%dL: 0x%x\n", i, reg); + if ((reg & 0x0F) != lastval) + { + lastval = reg & 0x0F; + lastchange = i; + } + msleep(100); + } + + /* unmute audio source */ + cx_clear(AUD_VOL_CTL, (1 << 6)); blackbird_api_cmd(dev, CX2341X_ENC_MUTE_VIDEO, 1, 0, BLACKBIRD_UNMUTE); msleep(1); blackbird_api_cmd(dev, CX2341X_ENC_MUTE_AUDIO, 1, 0, BLACKBIRD_UNMUTE); msleep(1); + blackbird_api_cmd(dev, CX2341X_ENC_REFRESH_INPUT, 0,0); + + /* initialize the video input */ + blackbird_api_cmd(dev, CX2341X_ENC_INITIALIZE_INPUT, 0, 0); + /* start capturing to the host interface */ - /* blackbird_api_cmd(dev, CX2341X_ENC_START_CAPTURE, 2, 0, 0, 0x13); */ blackbird_api_cmd(dev, CX2341X_ENC_START_CAPTURE, 2, 0, BLACKBIRD_MPEG_CAPTURE, BLACKBIRD_RAW_BITS_NONE ); msleep(10); - blackbird_api_cmd(dev, CX2341X_ENC_REFRESH_INPUT, 0,0); + dev->mpeg_active = 1; + return 0; +} + +static int blackbird_stop_codec(struct cx8802_dev *dev) +{ + struct cx88_core *core = dev->core; + + blackbird_api_cmd(dev, CX2341X_ENC_STOP_CAPTURE, 3, 0, + BLACKBIRD_END_NOW, + BLACKBIRD_MPEG_CAPTURE, + BLACKBIRD_RAW_BITS_NONE + ); + /* mute audio source */ + cx_set(AUD_VOL_CTL, (1 << 6)); + + dev->mpeg_active = 0; return 0; } @@ -833,6 +878,10 @@ static int vidioc_s_ext_ctrls (struct file *file, void *priv, if (f->ctrl_class != V4L2_CTRL_CLASS_MPEG) return -EINVAL; + + if (dev->mpeg_active) + blackbird_stop_codec(dev); + p = dev->params; err = cx2341x_ext_ctrls(&p, 0, f, VIDIOC_S_EXT_CTRLS); if (!err) { @@ -864,10 +913,9 @@ static int vidioc_s_frequency (struct file *file, void *priv, struct cx8802_dev *dev = fh->dev; struct cx88_core *core = dev->core; - blackbird_api_cmd(fh->dev, CX2341X_ENC_STOP_CAPTURE, 3, 0, - BLACKBIRD_END_NOW, - BLACKBIRD_MPEG_CAPTURE, - BLACKBIRD_RAW_BITS_NONE); + if (dev->mpeg_active) + blackbird_stop_codec(dev); + cx88_set_freq (core,f); blackbird_initialize_codec(dev); cx88_set_scale(dev->core, dev->width, dev->height, @@ -1073,15 +1121,11 @@ static int mpeg_open(struct inode *inode, struct file *file) static int mpeg_release(struct inode *inode, struct file *file) { struct cx8802_fh *fh = file->private_data; - struct cx8802_dev *dev = NULL; + struct cx8802_dev *dev = fh->dev; struct cx8802_driver *drv = NULL; - /* blackbird_api_cmd(fh->dev, CX2341X_ENC_STOP_CAPTURE, 3, 0, BLACKBIRD_END_NOW, 0, 0x13); */ - blackbird_api_cmd(fh->dev, CX2341X_ENC_STOP_CAPTURE, 3, 0, - BLACKBIRD_END_NOW, - BLACKBIRD_MPEG_CAPTURE, - BLACKBIRD_RAW_BITS_NONE - ); + if (dev->mpeg_active) + blackbird_stop_codec(dev); cx8802_cancel_buffers(fh->dev); /* stop mpeg capture */ @@ -1107,6 +1151,10 @@ static ssize_t mpeg_read(struct file *file, char __user *data, size_t count, loff_t *ppos) { struct cx8802_fh *fh = file->private_data; + struct cx8802_dev *dev = fh->dev; + + if (!dev->mpeg_active) + blackbird_start_codec(file, fh); return videobuf_read_stream(&fh->mpegq, data, count, ppos, 0, file->f_flags & O_NONBLOCK); @@ -1282,6 +1330,7 @@ static int cx8802_blackbird_probe(struct cx8802_driver *drv) core->name); host_setup(dev->core); + blackbird_initialize_codec(dev); blackbird_register_video(dev); /* initial device configuration: needed ? */ diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index bb1036a5c6c6..f10d432eb3eb 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -461,6 +461,7 @@ struct cx8802_dev { u32 mailbox; int width; int height; + unsigned char mpeg_active; /* nonzero if mpeg encoder is active */ /* mpeg params */ struct cx2341x_mpeg_params params; -- cgit v1.2.3-59-g8ed1b From e21a5c68deab7cd300e8502488f844f77e0f26d0 Mon Sep 17 00:00:00 2001 From: Jelle Foks Date: Mon, 21 May 2007 14:46:06 -0300 Subject: V4L/DVB (6829): cx88-blackbird: remove unnecessary msleep()'s Remove the unnecessary msleep()'s in cx88-blackbird.c Signed-off-by: Jelle Foks Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88-blackbird.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index 7ce37f46b753..4a0e1f8992cd 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -541,9 +541,7 @@ static int blackbird_initialize_codec(struct cx8802_dev *dev) /* ping was not successful, reset and upload firmware */ cx_write(MO_SRST_IO, 0); /* SYS_RSTO=0 */ - msleep(1); cx_write(MO_SRST_IO, 1); /* SYS_RSTO=1 */ - msleep(1); retval = blackbird_load_firmware(dev); if (retval < 0) return retval; @@ -565,7 +563,6 @@ static int blackbird_initialize_codec(struct cx8802_dev *dev) } dprintk(0, "Firmware version is 0x%08x\n", version); } - msleep(1); cx_write(MO_PINMUX_IO, 0x88); /* 656-8bit IO and enable MPEG parallel IO */ cx_clear(MO_INPUT_FORMAT, 0x100); /* chroma subcarrier lock to normal? */ @@ -573,7 +570,6 @@ static int blackbird_initialize_codec(struct cx8802_dev *dev) cx_clear(MO_OUTPUT_FORMAT, 0x0008); /* Normal Y-limits to let the mpeg encoder sync */ blackbird_codec_settings(dev); - msleep(1); blackbird_api_cmd(dev, CX2341X_ENC_SET_NUM_VSYNC_LINES, 2, 0, BLACKBIRD_FIELD1_SAA7115, @@ -584,7 +580,6 @@ static int blackbird_initialize_codec(struct cx8802_dev *dev) BLACKBIRD_CUSTOM_EXTENSION_USR_DATA, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0); - msleep(1); return 0; } @@ -616,9 +611,7 @@ static int blackbird_start_codec(struct file *file, void *priv) cx_clear(AUD_VOL_CTL, (1 << 6)); blackbird_api_cmd(dev, CX2341X_ENC_MUTE_VIDEO, 1, 0, BLACKBIRD_UNMUTE); - msleep(1); blackbird_api_cmd(dev, CX2341X_ENC_MUTE_AUDIO, 1, 0, BLACKBIRD_UNMUTE); - msleep(1); blackbird_api_cmd(dev, CX2341X_ENC_REFRESH_INPUT, 0,0); @@ -630,7 +623,6 @@ static int blackbird_start_codec(struct file *file, void *priv) BLACKBIRD_MPEG_CAPTURE, BLACKBIRD_RAW_BITS_NONE ); - msleep(10); dev->mpeg_active = 1; return 0; -- cgit v1.2.3-59-g8ed1b From 4423a9a3395ef652d80d848161444b417f1f78c0 Mon Sep 17 00:00:00 2001 From: Jelle Foks Date: Mon, 21 May 2007 14:48:58 -0300 Subject: V4L/DVB (6830): cx88-blackbird: remove unnecessary encoder unmute Remove the unnecessary BLACKBIRD_UNMUTE calls to the mpeg encoder in cx88-blackbird.c The encoder is never muted, hence unmuting should then only be necessary once after hardware initialization. I tested this from warm boots and cold boots (with long power down time to ensure the sram in the chip is emptied), and found that after the firmware upload the encoder is apparently not muted, making the unmutes unnecessary. Signed-off-by: Jelle Foks Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88-blackbird.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index 4a0e1f8992cd..165c0fdd3d13 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -610,9 +610,6 @@ static int blackbird_start_codec(struct file *file, void *priv) /* unmute audio source */ cx_clear(AUD_VOL_CTL, (1 << 6)); - blackbird_api_cmd(dev, CX2341X_ENC_MUTE_VIDEO, 1, 0, BLACKBIRD_UNMUTE); - blackbird_api_cmd(dev, CX2341X_ENC_MUTE_AUDIO, 1, 0, BLACKBIRD_UNMUTE); - blackbird_api_cmd(dev, CX2341X_ENC_REFRESH_INPUT, 0,0); /* initialize the video input */ -- cgit v1.2.3-59-g8ed1b From 7b27d45bb50498c86aa87e7ef174b2a0f5b6f361 Mon Sep 17 00:00:00 2001 From: Ricardo Cerqueira Date: Sun, 30 Sep 2007 13:02:49 -0300 Subject: V4L/DVB (6831): Audio routes fix for blackbird boards with the wm8775 ADC Fix lack of audio on the MPEG-2 stream of wm8775 based blackbirds. The wm8775 module initializes the audio input at "route 2", which doesn't hold true for all boards. The HVR-1300, for example, uses route 1 for tuner audio, and route 2 for baseband. So we must route the audio to the proper input depending on what video input is being used. Signed-off-by: Ricardo Cerqueira Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88-cards.c | 38 +++++++++++++++++------------------ drivers/media/video/cx88/cx88-video.c | 16 +++++++++++++-- drivers/media/video/cx88/cx88.h | 2 +- 3 files changed, 34 insertions(+), 22 deletions(-) diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index f8a786ae4758..d484e5ce579c 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -302,22 +302,22 @@ static const struct cx88_board cx88_boards[] = { .type = CX88_VMUX_TELEVISION, .vmux = 0, .gpio0 = 0x0000bde2, - .extadc = 1, + .audioroute = 1, },{ .type = CX88_VMUX_COMPOSITE1, .vmux = 1, .gpio0 = 0x0000bde6, - .extadc = 1, + .audioroute = 1, },{ .type = CX88_VMUX_SVIDEO, .vmux = 2, .gpio0 = 0x0000bde6, - .extadc = 1, + .audioroute = 1, }}, .radio = { .type = CX88_RADIO, .gpio0 = 0x0000bd62, - .extadc = 1, + .audioroute = 1, }, .mpeg = CX88_MPEG_BLACKBIRD, }, @@ -378,7 +378,7 @@ static const struct cx88_board cx88_boards[] = { .type = CX88_VMUX_SVIDEO, .vmux = 2, .gpio0 = 0x0000fde6, // 0x0000fda6 L,R RCA audio in? - .extadc = 1, + .audioroute = 1, }}, .radio = { .type = CX88_RADIO, @@ -549,7 +549,7 @@ static const struct cx88_board cx88_boards[] = { .input = {{ .type = CX88_VMUX_TELEVISION, .vmux = 0, - .extadc = 1, + .audioroute = 1, }}, .mpeg = CX88_MPEG_BLACKBIRD, }, @@ -672,22 +672,22 @@ static const struct cx88_board cx88_boards[] = { .type = CX88_VMUX_TELEVISION, .vmux = 0, .gpio0 = 0x00009d80, - .extadc = 1, + .audioroute = 1, },{ .type = CX88_VMUX_COMPOSITE1, .vmux = 1, .gpio0 = 0x00009d76, - .extadc = 1, + .audioroute = 1, },{ .type = CX88_VMUX_SVIDEO, .vmux = 2, .gpio0 = 0x00009d76, - .extadc = 1, + .audioroute = 1, }}, .radio = { .type = CX88_RADIO, .gpio0 = 0x00009d00, - .extadc = 1, + .audioroute = 1, }, .mpeg = CX88_MPEG_BLACKBIRD, }, @@ -826,23 +826,23 @@ static const struct cx88_board cx88_boards[] = { .type = CX88_VMUX_COMPOSITE1, .vmux = 0, .gpio0 = 0x0000cd73, - .extadc = 1, + .audioroute = 1, },{ .type = CX88_VMUX_SVIDEO, .vmux = 1, .gpio0 = 0x0000cd73, - .extadc = 1, + .audioroute = 1, },{ .type = CX88_VMUX_TELEVISION, .vmux = 3, .gpio0 = 0x0000cdb3, - .extadc = 1, + .audioroute = 1, }}, .radio = { .type = CX88_RADIO, .vmux = 2, .gpio0 = 0x0000cdf3, - .extadc = 1, + .audioroute = 1, }, .mpeg = CX88_MPEG_BLACKBIRD, }, @@ -1110,12 +1110,12 @@ static const struct cx88_board cx88_boards[] = { .type = CX88_VMUX_COMPOSITE1, .vmux = 1, .gpio0 = 0x3de6, - .extadc = 1, + .audioroute = 1, },{ .type = CX88_VMUX_SVIDEO, .vmux = 2, .gpio0 = 0x3de6, - .extadc = 1, + .audioroute = 1, }}, .radio = { .type = CX88_RADIO, @@ -1340,17 +1340,17 @@ static const struct cx88_board cx88_boards[] = { .type = CX88_VMUX_TELEVISION, .vmux = 0, .gpio0 = 0xe780, - .extadc = 1, + .audioroute = 1, },{ .type = CX88_VMUX_COMPOSITE1, .vmux = 1, .gpio0 = 0xe780, - .extadc = 1, + .audioroute = 2, },{ .type = CX88_VMUX_SVIDEO, .vmux = 2, .gpio0 = 0xe780, - .extadc = 1, + .audioroute = 2, }}, /* fixme: Add radio support */ .mpeg = CX88_MPEG_DVB | CX88_MPEG_BLACKBIRD, diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index 6d5ea8ce9830..1b80f0f700e6 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -394,9 +394,21 @@ int cx88_video_mux(struct cx88_core *core, unsigned int input) if (core->board.mpeg & CX88_MPEG_BLACKBIRD) { /* sets sound input from external adc */ - if (INPUT(input).extadc) + if (INPUT(input).audioroute) { + /* The wm8775 module has the "2" route hardwired into + the initialization. Some boards may use different + routes for different inputs. HVR-1300 surely does */ + if (core->board.audio_chip && + core->board.audio_chip == AUDIO_CHIP_WM8775) { + struct v4l2_routing route; + + route.input = INPUT(input).audioroute; + cx88_call_i2c_clients(core, + VIDIOC_INT_S_AUDIO_ROUTING,&route); + } + cx_set(AUD_CTL, EN_I2SIN_ENABLE); - else + } else cx_clear(AUD_CTL, EN_I2SIN_ENABLE); } return 0; diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index f10d432eb3eb..a10f94de0d31 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -228,7 +228,7 @@ struct cx88_input { enum cx88_itype type; u32 gpio0, gpio1, gpio2, gpio3; unsigned int vmux:2; - unsigned int extadc:1; + unsigned int audioroute; }; struct cx88_board { -- cgit v1.2.3-59-g8ed1b From 6a0bc9a0162d10c551bb916a1a21bfede4db3203 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 13 Oct 2007 20:42:45 -0300 Subject: V4L/DVB (6832): cx88-blackbird: don't mute audio when stopping the codec We should not mute the audio input when we stop the codec, because it will interfere with the live uncompressed stream. Signed-off-by: Michael Krufky Reviewed-by: Jelle Foks Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88-blackbird.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index 165c0fdd3d13..d83facf00dc6 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -627,15 +627,11 @@ static int blackbird_start_codec(struct file *file, void *priv) static int blackbird_stop_codec(struct cx8802_dev *dev) { - struct cx88_core *core = dev->core; - blackbird_api_cmd(dev, CX2341X_ENC_STOP_CAPTURE, 3, 0, BLACKBIRD_END_NOW, BLACKBIRD_MPEG_CAPTURE, BLACKBIRD_RAW_BITS_NONE ); - /* mute audio source */ - cx_set(AUD_VOL_CTL, (1 << 6)); dev->mpeg_active = 0; return 0; -- cgit v1.2.3-59-g8ed1b From 66e6fbdf99420efe58685feda0ac1b73b33400e0 Mon Sep 17 00:00:00 2001 From: Ricardo Cerqueira Date: Tue, 16 Oct 2007 20:52:08 -0300 Subject: V4L/DVB (6833): Don't limit cx88 audio routing to blackbird boards All cx2388 boards need the line-in audio to be routed from an external ADC (refered to as "ADC mode" in the spec sheet), since the chip is uncapable of dealing with baseband audio directly. So... this patch enables normal mode when using the tuner (TV or Radio), and enables ADC mode with any other source. It'll probably only work with boards that have supported ADCs (such as the Wolfson wm9775) Signed-off-by: Ricardo Cerqueira Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88-video.c | 46 +++++++++++++++++++++++------------ 1 file changed, 31 insertions(+), 15 deletions(-) diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index 1b80f0f700e6..c8a5cd5eedf3 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -392,25 +392,41 @@ int cx88_video_mux(struct cx88_core *core, unsigned int input) break; } - if (core->board.mpeg & CX88_MPEG_BLACKBIRD) { - /* sets sound input from external adc */ - if (INPUT(input).audioroute) { - /* The wm8775 module has the "2" route hardwired into - the initialization. Some boards may use different - routes for different inputs. HVR-1300 surely does */ - if (core->board.audio_chip && - core->board.audio_chip == AUDIO_CHIP_WM8775) { - struct v4l2_routing route; - - route.input = INPUT(input).audioroute; - cx88_call_i2c_clients(core, - VIDIOC_INT_S_AUDIO_ROUTING,&route); - } + /* if there are audioroutes defined, we have an external + ADC to deal with audio */ + if (INPUT(input).audioroute) { + + /* cx2388's C-ADC is connected to the tuner only. + When used with S-Video, that ADC is busy dealing with + chroma, so an external must be used for baseband audio */ + + if (INPUT(input).type != CX88_VMUX_TELEVISION && + INPUT(input).type != CX88_RADIO) { + /* "ADC mode" */ + cx_write(AUD_I2SCNTL, 0x1); cx_set(AUD_CTL, EN_I2SIN_ENABLE); - } else + } else { + /* Normal mode */ + cx_write(AUD_I2SCNTL, 0x0); cx_clear(AUD_CTL, EN_I2SIN_ENABLE); + } + + /* The wm8775 module has the "2" route hardwired into + the initialization. Some boards may use different + routes for different inputs. HVR-1300 surely does */ + if (core->board.audio_chip && + core->board.audio_chip == AUDIO_CHIP_WM8775) { + struct v4l2_routing route; + + route.input = INPUT(input).audioroute; + cx88_call_i2c_clients(core, + VIDIOC_INT_S_AUDIO_ROUTING,&route); + + } + } + return 0; } EXPORT_SYMBOL(cx88_video_mux); -- cgit v1.2.3-59-g8ed1b From 36e05a44756efe562ad1f49ada9bd6a598242828 Mon Sep 17 00:00:00 2001 From: Frej Drejhammar Date: Mon, 5 Nov 2007 17:57:11 -0300 Subject: V4L/DVB (6834): cx88-video: Enable selection of the WM8775 for cx88 cards The auto selection of pertinent helper chips (VIDEO_HELPER_CHIPS_AUTO) should select the wm8775 driver, which is used by at least one Conexant 2388x based card (Hauppauge HVR-1300), if VIDEO_CX88 is selected. Signed-off-by: Frej Drejhammar Signed-off-by: Ricardo Cerqueira Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig index ceb31d4a2512..49d3813a9b48 100644 --- a/drivers/media/video/cx88/Kconfig +++ b/drivers/media/video/cx88/Kconfig @@ -8,6 +8,7 @@ config VIDEO_CX88 select VIDEO_TUNER select VIDEO_TVEEPROM select VIDEO_IR + select VIDEO_WM8775 if VIDEO_HELPER_CHIPS_AUTO ---help--- This is a video4linux driver for Conexant 2388x based TV cards. -- cgit v1.2.3-59-g8ed1b From d8f69971d8d6c137e42928492f8d469078113db9 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 17 Dec 2007 10:35:59 -0300 Subject: V4L/DVB (6836): Fix CodingStyle troubles caused by the previous cx88 commits Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88-blackbird.c | 10 ++++------ drivers/media/video/cx88/cx88-video.c | 2 +- 2 files changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index d83facf00dc6..5f79442924fd 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -594,13 +594,11 @@ static int blackbird_start_codec(struct file *file, void *priv) int lastchange = -1; int lastval = 0; - for (i=0; (i < 10) && (i < (lastchange + 4)); i++) - { + for (i = 0; (i < 10) && (i < (lastchange + 4)); i++) { reg = cx_read(AUD_STATUS); - dprintk(1,"AUD_STATUS:%dL: 0x%x\n", i, reg); - if ((reg & 0x0F) != lastval) - { + dprintk(1, "AUD_STATUS:%dL: 0x%x\n", i, reg); + if ((reg & 0x0F) != lastval) { lastval = reg & 0x0F; lastchange = i; } @@ -610,7 +608,7 @@ static int blackbird_start_codec(struct file *file, void *priv) /* unmute audio source */ cx_clear(AUD_VOL_CTL, (1 << 6)); - blackbird_api_cmd(dev, CX2341X_ENC_REFRESH_INPUT, 0,0); + blackbird_api_cmd(dev, CX2341X_ENC_REFRESH_INPUT, 0, 0); /* initialize the video input */ blackbird_api_cmd(dev, CX2341X_ENC_INITIALIZE_INPUT, 0, 0); diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index c8a5cd5eedf3..7f1931aed207 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -421,7 +421,7 @@ int cx88_video_mux(struct cx88_core *core, unsigned int input) route.input = INPUT(input).audioroute; cx88_call_i2c_clients(core, - VIDIOC_INT_S_AUDIO_ROUTING,&route); + VIDIOC_INT_S_AUDIO_ROUTING, &route); } -- cgit v1.2.3-59-g8ed1b From 35e420357bd835d43c76d3ab5e35694be0b56f95 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 17 Dec 2007 10:54:06 -0300 Subject: V4L/DVB (6837): Convert cx88_input.audioroute to a bitfield Prevent us from wasting some extra bytes of memory Thanks to Trent Piepho, for pointing this out. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index a10f94de0d31..0cd2946a2789 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -228,7 +228,7 @@ struct cx88_input { enum cx88_itype type; u32 gpio0, gpio1, gpio2, gpio3; unsigned int vmux:2; - unsigned int audioroute; + unsigned int audioroute:2; }; struct cx88_board { -- cgit v1.2.3-59-g8ed1b From daae58956bebeab6631ba078669970a27bdfbdbe Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 16 Dec 2007 19:14:31 -0300 Subject: V4L/DVB (6838): tda9887: remove references to struct tuner from printk macros Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tda9887.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c index 8a95f097ba23..f265c702cde1 100644 --- a/drivers/media/video/tda9887.c +++ b/drivers/media/video/tda9887.c @@ -25,14 +25,14 @@ static int tda9887_debug; module_param_named(debug, tda9887_debug, int, 0644); #define tda9887_info(fmt, arg...) do {\ - printk(KERN_INFO "%s %d-%04x: " fmt, priv->t->i2c->name, \ - i2c_adapter_id(priv->t->i2c->adapter), \ - priv->t->i2c->addr, ##arg); } while (0) + printk(KERN_INFO "tda9887 %d-%04x: " fmt, \ + i2c_adapter_id(priv->i2c_props.adap), \ + priv->i2c_props.addr, ##arg); } while (0) #define tda9887_dbg(fmt, arg...) do {\ if (tda9887_debug) \ - printk(KERN_INFO "%s %d-%04x: " fmt, priv->t->i2c->name, \ - i2c_adapter_id(priv->t->i2c->adapter), \ - priv->t->i2c->addr, ##arg); } while (0) + printk(KERN_INFO "tda9887 %d-%04x: " fmt, \ + i2c_adapter_id(priv->i2c_props.adap), \ + priv->i2c_props.addr, ##arg); } while (0) struct tda9887_priv { struct tuner_i2c_props i2c_props; -- cgit v1.2.3-59-g8ed1b From f1c9a281005f714fdc57c830a23f2b6bd6e2b714 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 16 Dec 2007 19:27:23 -0300 Subject: V4L/DVB (6839): tuner: add set_config to struct analog_tuner_ops Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-core.c | 14 ++++++++++++++ drivers/media/video/tuner-driver.h | 3 +++ 2 files changed, 17 insertions(+) diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 355f9810facf..9134b997ef23 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -154,6 +154,19 @@ static int fe_has_signal(struct dvb_frontend *fe) return strength; } +static int fe_set_config(struct dvb_frontend *fe, void *priv_cfg) +{ + struct dvb_tuner_ops *fe_tuner_ops = &fe->ops.tuner_ops; + struct tuner *t = fe->analog_demod_priv; + + if (fe_tuner_ops->set_config) + return fe_tuner_ops->set_config(fe, priv_cfg); + + tuner_warn("Tuner frontend module has no way to set config\n"); + + return 0; +} + static void tuner_status(struct dvb_frontend *fe); static struct analog_tuner_ops tuner_core_ops = { @@ -161,6 +174,7 @@ static struct analog_tuner_ops tuner_core_ops = { .standby = fe_standby, .release = fe_release, .has_signal = fe_has_signal, + .set_config = fe_set_config, .tuner_status = tuner_status }; diff --git a/drivers/media/video/tuner-driver.h b/drivers/media/video/tuner-driver.h index 65ced435018a..7f43dc68ab2e 100644 --- a/drivers/media/video/tuner-driver.h +++ b/drivers/media/video/tuner-driver.h @@ -45,6 +45,9 @@ struct analog_tuner_ops { void (*standby)(struct dvb_frontend *fe); void (*release)(struct dvb_frontend *fe); int (*i2c_gate_ctrl)(struct dvb_frontend *fe, int enable); + + /** This is to allow setting tuner-specific configuration */ + int (*set_config)(struct dvb_frontend *fe, void *priv_cfg); }; struct tuner { -- cgit v1.2.3-59-g8ed1b From 710401b837f8849dc9c28385eb5298746b811305 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 16 Dec 2007 19:53:32 -0300 Subject: V4L/DVB (6840): tuner: convert tda9887 to use TUNER_SET_CONFIG Use TUNER_SET_CONFIG to set configuration in tda9887's private state structure, rather than storing tda9887-specific configuration within struct tuner. Update handling of TUNER_SET_CONFIG by tuner-core, to call &t->fe.ops.analog_demod_ops rather than &t->fe.ops.tuner_ops analog_demod_ops.set_config passes the request to tuner_ops.set_config, so this does not break other drivers. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tda9887.c | 47 ++++++++++++++++++++++++-------------- drivers/media/video/tuner-core.c | 12 +++------- drivers/media/video/tuner-driver.h | 3 --- 3 files changed, 33 insertions(+), 29 deletions(-) diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c index f265c702cde1..7686f52cfcf9 100644 --- a/drivers/media/video/tda9887.c +++ b/drivers/media/video/tda9887.c @@ -38,6 +38,7 @@ struct tda9887_priv { struct tuner_i2c_props i2c_props; unsigned char data[4]; + unsigned int config; struct tuner *t; }; @@ -473,31 +474,31 @@ static int tda9887_set_insmod(struct dvb_frontend *fe) return 0; } -static int tda9887_set_config(struct dvb_frontend *fe) +static int tda9887_do_config(struct dvb_frontend *fe) { struct tda9887_priv *priv = fe->analog_demod_priv; struct tuner *t = priv->t; char *buf = priv->data; - if (t->tda9887_config & TDA9887_PORT1_ACTIVE) + if (priv->config & TDA9887_PORT1_ACTIVE) buf[1] &= ~cOutputPort1Inactive; - if (t->tda9887_config & TDA9887_PORT1_INACTIVE) + if (priv->config & TDA9887_PORT1_INACTIVE) buf[1] |= cOutputPort1Inactive; - if (t->tda9887_config & TDA9887_PORT2_ACTIVE) + if (priv->config & TDA9887_PORT2_ACTIVE) buf[1] &= ~cOutputPort2Inactive; - if (t->tda9887_config & TDA9887_PORT2_INACTIVE) + if (priv->config & TDA9887_PORT2_INACTIVE) buf[1] |= cOutputPort2Inactive; - if (t->tda9887_config & TDA9887_QSS) + if (priv->config & TDA9887_QSS) buf[1] |= cQSS; - if (t->tda9887_config & TDA9887_INTERCARRIER) + if (priv->config & TDA9887_INTERCARRIER) buf[1] &= ~cQSS; - if (t->tda9887_config & TDA9887_AUTOMUTE) + if (priv->config & TDA9887_AUTOMUTE) buf[1] |= cAutoMuteFmActive; - if (t->tda9887_config & TDA9887_DEEMPHASIS_MASK) { + if (priv->config & TDA9887_DEEMPHASIS_MASK) { buf[2] &= ~0x60; - switch (t->tda9887_config & TDA9887_DEEMPHASIS_MASK) { + switch (priv->config & TDA9887_DEEMPHASIS_MASK) { case TDA9887_DEEMPHASIS_NONE: buf[2] |= cDeemphasisOFF; break; @@ -509,21 +510,22 @@ static int tda9887_set_config(struct dvb_frontend *fe) break; } } - if (t->tda9887_config & TDA9887_TOP_SET) { + if (priv->config & TDA9887_TOP_SET) { buf[2] &= ~cTopMask; - buf[2] |= (t->tda9887_config >> 8) & cTopMask; + buf[2] |= (priv->config >> 8) & cTopMask; } - if ((t->tda9887_config & TDA9887_INTERCARRIER_NTSC) && (t->std & V4L2_STD_NTSC)) + if ((priv->config & TDA9887_INTERCARRIER_NTSC) && + (t->std & V4L2_STD_NTSC)) buf[1] &= ~cQSS; - if (t->tda9887_config & TDA9887_GATING_18) + if (priv->config & TDA9887_GATING_18) buf[3] &= ~cGating_36; if (t->mode == V4L2_TUNER_RADIO) { - if (t->tda9887_config & TDA9887_RIF_41_3) { + if (priv->config & TDA9887_RIF_41_3) { buf[3] &= ~cVideoIFMask; buf[3] |= cRadioIF_41_30; } - if (t->tda9887_config & TDA9887_GAIN_NORMAL) + if (priv->config & TDA9887_GAIN_NORMAL) buf[3] &= ~cTunerGainLow; } @@ -570,7 +572,7 @@ static void tda9887_configure(struct dvb_frontend *fe) priv->data[1] |= cOutputPort1Inactive; priv->data[1] |= cOutputPort2Inactive; - tda9887_set_config(fe); + tda9887_do_config(fe); tda9887_set_insmod(fe); if (t->mode == T_STANDBY) { @@ -629,6 +631,16 @@ static void tda9887_set_params(struct dvb_frontend *fe, tda9887_configure(fe); } +static int tda9887_set_config(struct dvb_frontend *fe, void *priv_cfg) +{ + struct tda9887_priv *priv = fe->analog_demod_priv; + + priv->config = *(unsigned int *)priv_cfg; + tda9887_configure(fe); + + return 0; +} + static void tda9887_release(struct dvb_frontend *fe) { kfree(fe->analog_demod_priv); @@ -644,6 +656,7 @@ static struct analog_tuner_ops tda9887_tuner_ops = { .tuner_status = tda9887_tuner_status, .get_afc = tda9887_get_afc, .release = tda9887_release, + .set_config = tda9887_set_config, }; int tda9887_attach(struct tuner *t) diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 9134b997ef23..695f39ebe77b 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -833,25 +833,19 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) #endif case TUNER_SET_CONFIG: { - struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops; + struct analog_tuner_ops *ops = t->fe.ops.analog_demod_ops; struct v4l2_priv_tun_config *cfg = arg; if (t->type != cfg->tuner) break; - if (t->type == TUNER_TDA9887) { - t->tda9887_config = *(unsigned int *)cfg->priv; - set_freq(client, t->tv_freq); - break; - } - - if (NULL == fe_tuner_ops->set_config) { + if ((NULL == ops) || (NULL == ops->set_config)) { tuner_warn("Tuner frontend module has no way to " "set config\n"); break; } - fe_tuner_ops->set_config(&t->fe, cfg->priv); + ops->set_config(&t->fe, cfg->priv); break; } /* --- v4l ioctls --- */ diff --git a/drivers/media/video/tuner-driver.h b/drivers/media/video/tuner-driver.h index 7f43dc68ab2e..417753b7c3fa 100644 --- a/drivers/media/video/tuner-driver.h +++ b/drivers/media/video/tuner-driver.h @@ -69,9 +69,6 @@ struct tuner { struct dvb_frontend fe; - /* used by tda9887 */ - unsigned int tda9887_config; - unsigned int config; int (*tuner_callback) (void *dev, int command,int arg); }; -- cgit v1.2.3-59-g8ed1b From 91c9d4a16710b047781248a38e7000ce9de324af Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 16 Dec 2007 20:05:00 -0300 Subject: V4L/DVB (6841): tda9887: maintain private state independent of struct tuner Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tda9887.c | 31 ++++++++++++++++++------------- 1 file changed, 18 insertions(+), 13 deletions(-) diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c index 7686f52cfcf9..95d974298fe9 100644 --- a/drivers/media/video/tda9887.c +++ b/drivers/media/video/tda9887.c @@ -39,8 +39,9 @@ struct tda9887_priv { unsigned char data[4]; unsigned int config; - - struct tuner *t; + unsigned int mode; + unsigned int audmode; + v4l2_std_id std; }; /* ---------------------------------------------------------------------- */ @@ -402,19 +403,18 @@ static void dump_write_message(struct dvb_frontend *fe, unsigned char *buf) static int tda9887_set_tvnorm(struct dvb_frontend *fe) { struct tda9887_priv *priv = fe->analog_demod_priv; - struct tuner *t = priv->t; struct tvnorm *norm = NULL; char *buf = priv->data; int i; - if (t->mode == V4L2_TUNER_RADIO) { - if (t->audmode == V4L2_TUNER_MODE_MONO) + if (priv->mode == V4L2_TUNER_RADIO) { + if (priv->audmode == V4L2_TUNER_MODE_MONO) norm = &radio_mono; else norm = &radio_stereo; } else { for (i = 0; i < ARRAY_SIZE(tvnorms); i++) { - if (tvnorms[i].std & t->std) { + if (tvnorms[i].std & priv->std) { norm = tvnorms+i; break; } @@ -477,7 +477,6 @@ static int tda9887_set_insmod(struct dvb_frontend *fe) static int tda9887_do_config(struct dvb_frontend *fe) { struct tda9887_priv *priv = fe->analog_demod_priv; - struct tuner *t = priv->t; char *buf = priv->data; if (priv->config & TDA9887_PORT1_ACTIVE) @@ -515,12 +514,12 @@ static int tda9887_do_config(struct dvb_frontend *fe) buf[2] |= (priv->config >> 8) & cTopMask; } if ((priv->config & TDA9887_INTERCARRIER_NTSC) && - (t->std & V4L2_STD_NTSC)) + (priv->std & V4L2_STD_NTSC)) buf[1] &= ~cQSS; if (priv->config & TDA9887_GATING_18) buf[3] &= ~cGating_36; - if (t->mode == V4L2_TUNER_RADIO) { + if (priv->mode == V4L2_TUNER_RADIO) { if (priv->config & TDA9887_RIF_41_3) { buf[3] &= ~cVideoIFMask; buf[3] |= cRadioIF_41_30; @@ -550,7 +549,6 @@ static int tda9887_status(struct dvb_frontend *fe) static void tda9887_configure(struct dvb_frontend *fe) { struct tda9887_priv *priv = fe->analog_demod_priv; - struct tuner *t = priv->t; int rc; memset(priv->data,0,sizeof(priv->data)); @@ -575,9 +573,8 @@ static void tda9887_configure(struct dvb_frontend *fe) tda9887_do_config(fe); tda9887_set_insmod(fe); - if (t->mode == T_STANDBY) { + if (priv->mode == T_STANDBY) priv->data[1] |= cForcedMuteAudioON; - } tda9887_dbg("writing: b=0x%02x c=0x%02x e=0x%02x\n", priv->data[1],priv->data[2],priv->data[3]); @@ -622,12 +619,21 @@ static int tda9887_get_afc(struct dvb_frontend *fe) static void tda9887_standby(struct dvb_frontend *fe) { + struct tda9887_priv *priv = fe->analog_demod_priv; + + priv->mode = T_STANDBY; + tda9887_configure(fe); } static void tda9887_set_params(struct dvb_frontend *fe, struct analog_parameters *params) { + struct tda9887_priv *priv = fe->analog_demod_priv; + + priv->mode = params->mode; + priv->audmode = params->audmode; + priv->std = params->std; tda9887_configure(fe); } @@ -670,7 +676,6 @@ int tda9887_attach(struct tuner *t) priv->i2c_props.addr = t->i2c->addr; priv->i2c_props.adap = t->i2c->adapter; - priv->t = t; strlcpy(t->i2c->name, "tda9887", sizeof(t->i2c->name)); -- cgit v1.2.3-59-g8ed1b From 8ca4083b50752d588f8b8b1e5e5776fb17d00304 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 16 Dec 2007 20:11:46 -0300 Subject: V4L/DVB (6842): tda9887: remove dependency on struct tuner Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tda9887.c | 22 +++++++++++----------- drivers/media/video/tda9887.h | 13 +++++++++---- drivers/media/video/tuner-core.c | 2 +- 3 files changed, 21 insertions(+), 16 deletions(-) diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c index 95d974298fe9..0b5dc37fea51 100644 --- a/drivers/media/video/tda9887.c +++ b/drivers/media/video/tda9887.c @@ -9,6 +9,7 @@ #include #include #include +#include "tuner-driver.h" #include "tuner-i2c.h" #include "tda9887.h" @@ -665,26 +666,25 @@ static struct analog_tuner_ops tda9887_tuner_ops = { .set_config = tda9887_set_config, }; -int tda9887_attach(struct tuner *t) +struct dvb_frontend *tda9887_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c_adap, + u8 i2c_addr) { struct tda9887_priv *priv = NULL; priv = kzalloc(sizeof(struct tda9887_priv), GFP_KERNEL); if (priv == NULL) - return -ENOMEM; - t->fe.analog_demod_priv = priv; + return NULL; + fe->analog_demod_priv = priv; - priv->i2c_props.addr = t->i2c->addr; - priv->i2c_props.adap = t->i2c->adapter; + priv->i2c_props.addr = i2c_addr; + priv->i2c_props.adap = i2c_adap; - strlcpy(t->i2c->name, "tda9887", sizeof(t->i2c->name)); + tda9887_info("tda988[5/6/7] found\n"); - tda9887_info("tda988[5/6/7] found @ 0x%x (%s)\n", t->i2c->addr, - t->i2c->driver->driver.name); + fe->ops.analog_demod_ops = &tda9887_tuner_ops; - t->fe.ops.analog_demod_ops = &tda9887_tuner_ops; - - return 0; + return fe; } EXPORT_SYMBOL_GPL(tda9887_attach); diff --git a/drivers/media/video/tda9887.h b/drivers/media/video/tda9887.h index b879f0ec2855..8f873a8e6ed2 100644 --- a/drivers/media/video/tda9887.h +++ b/drivers/media/video/tda9887.h @@ -17,16 +17,21 @@ #ifndef __TDA9887_H__ #define __TDA9887_H__ -#include "tuner-driver.h" +#include +#include "dvb_frontend.h" /* ------------------------------------------------------------------------ */ #if defined(CONFIG_TUNER_TDA9887) || (defined(CONFIG_TUNER_TDA9887_MODULE) && defined(MODULE)) -extern int tda9887_attach(struct tuner *t); +extern struct dvb_frontend *tda9887_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c_adap, + u8 i2c_addr); #else -static inline int tda9887_attach(struct tuner *t) +static inline struct dvb_frontend *tda9887_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c_adap, + u8 i2c_addr) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); - return -EINVAL; + return NULL; } #endif diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 695f39ebe77b..d51f3afa969d 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -408,7 +408,7 @@ static void set_type(struct i2c_client *c, unsigned int type, break; } case TUNER_TDA9887: - tda9887_attach(t); + tda9887_attach(&t->fe, t->i2c->adapter, t->i2c->addr); break; default: attach_simple_tuner(t); -- cgit v1.2.3-59-g8ed1b From 790ba18ec7a5f15c854f52835b0e6f39de2369dd Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 16 Dec 2007 21:20:21 -0300 Subject: V4L/DVB (6843): tda9887: use printk macros from tuner-i2c.h replace tda9887_info and tda9887_dbg printk macros with tuner_info and tuner_dbg, defined in tuner-i2c.h Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tda9887.c | 145 ++++++++++++++++++++---------------------- 1 file changed, 70 insertions(+), 75 deletions(-) diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c index 0b5dc37fea51..5085cb902125 100644 --- a/drivers/media/video/tda9887.c +++ b/drivers/media/video/tda9887.c @@ -22,18 +22,11 @@ Used as part of several tuners */ -static int tda9887_debug; -module_param_named(debug, tda9887_debug, int, 0644); - -#define tda9887_info(fmt, arg...) do {\ - printk(KERN_INFO "tda9887 %d-%04x: " fmt, \ - i2c_adapter_id(priv->i2c_props.adap), \ - priv->i2c_props.addr, ##arg); } while (0) -#define tda9887_dbg(fmt, arg...) do {\ - if (tda9887_debug) \ - printk(KERN_INFO "tda9887 %d-%04x: " fmt, \ - i2c_adapter_id(priv->i2c_props.adap), \ - priv->i2c_props.addr, ##arg); } while (0) +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "enable verbose debug messages"); + +#define PREFIX "tda9887" struct tda9887_priv { struct tuner_i2c_props i2c_props; @@ -295,12 +288,12 @@ static void dump_read_message(struct dvb_frontend *fe, unsigned char *buf) "+ 37.5 kHz", "+ 12.5 kHz", }; - tda9887_info("read: 0x%2x\n", buf[0]); - tda9887_info(" after power on : %s\n", (buf[0] & 0x01) ? "yes" : "no"); - tda9887_info(" afc : %s\n", afc[(buf[0] >> 1) & 0x0f]); - tda9887_info(" fmif level : %s\n", (buf[0] & 0x20) ? "high" : "low"); - tda9887_info(" afc window : %s\n", (buf[0] & 0x40) ? "in" : "out"); - tda9887_info(" vfi level : %s\n", (buf[0] & 0x80) ? "high" : "low"); + tuner_info("read: 0x%2x\n", buf[0]); + tuner_info(" after power on : %s\n", (buf[0] & 0x01) ? "yes" : "no"); + tuner_info(" afc : %s\n", afc[(buf[0] >> 1) & 0x0f]); + tuner_info(" fmif level : %s\n", (buf[0] & 0x20) ? "high" : "low"); + tuner_info(" afc window : %s\n", (buf[0] & 0x40) ? "in" : "out"); + tuner_info(" vfi level : %s\n", (buf[0] & 0x80) ? "high" : "low"); } static void dump_write_message(struct dvb_frontend *fe, unsigned char *buf) @@ -345,58 +338,60 @@ static void dump_write_message(struct dvb_frontend *fe, unsigned char *buf) "44 MHz", }; - tda9887_info("write: byte B 0x%02x\n",buf[1]); - tda9887_info(" B0 video mode : %s\n", - (buf[1] & 0x01) ? "video trap" : "sound trap"); - tda9887_info(" B1 auto mute fm : %s\n", - (buf[1] & 0x02) ? "yes" : "no"); - tda9887_info(" B2 carrier mode : %s\n", - (buf[1] & 0x04) ? "QSS" : "Intercarrier"); - tda9887_info(" B3-4 tv sound/radio : %s\n", - sound[(buf[1] & 0x18) >> 3]); - tda9887_info(" B5 force mute audio: %s\n", - (buf[1] & 0x20) ? "yes" : "no"); - tda9887_info(" B6 output port 1 : %s\n", - (buf[1] & 0x40) ? "high (inactive)" : "low (active)"); - tda9887_info(" B7 output port 2 : %s\n", - (buf[1] & 0x80) ? "high (inactive)" : "low (active)"); - - tda9887_info("write: byte C 0x%02x\n",buf[2]); - tda9887_info(" C0-4 top adjustment : %s dB\n", adjust[buf[2] & 0x1f]); - tda9887_info(" C5-6 de-emphasis : %s\n", deemph[(buf[2] & 0x60) >> 5]); - tda9887_info(" C7 audio gain : %s\n", - (buf[2] & 0x80) ? "-6" : "0"); - - tda9887_info("write: byte E 0x%02x\n",buf[3]); - tda9887_info(" E0-1 sound carrier : %s\n", - carrier[(buf[3] & 0x03)]); - tda9887_info(" E6 l pll gating : %s\n", - (buf[3] & 0x40) ? "36" : "13"); + tuner_info("write: byte B 0x%02x\n", buf[1]); + tuner_info(" B0 video mode : %s\n", + (buf[1] & 0x01) ? "video trap" : "sound trap"); + tuner_info(" B1 auto mute fm : %s\n", + (buf[1] & 0x02) ? "yes" : "no"); + tuner_info(" B2 carrier mode : %s\n", + (buf[1] & 0x04) ? "QSS" : "Intercarrier"); + tuner_info(" B3-4 tv sound/radio : %s\n", + sound[(buf[1] & 0x18) >> 3]); + tuner_info(" B5 force mute audio: %s\n", + (buf[1] & 0x20) ? "yes" : "no"); + tuner_info(" B6 output port 1 : %s\n", + (buf[1] & 0x40) ? "high (inactive)" : "low (active)"); + tuner_info(" B7 output port 2 : %s\n", + (buf[1] & 0x80) ? "high (inactive)" : "low (active)"); + + tuner_info("write: byte C 0x%02x\n", buf[2]); + tuner_info(" C0-4 top adjustment : %s dB\n", + adjust[buf[2] & 0x1f]); + tuner_info(" C5-6 de-emphasis : %s\n", + deemph[(buf[2] & 0x60) >> 5]); + tuner_info(" C7 audio gain : %s\n", + (buf[2] & 0x80) ? "-6" : "0"); + + tuner_info("write: byte E 0x%02x\n", buf[3]); + tuner_info(" E0-1 sound carrier : %s\n", + carrier[(buf[3] & 0x03)]); + tuner_info(" E6 l pll gating : %s\n", + (buf[3] & 0x40) ? "36" : "13"); if (buf[1] & 0x08) { /* radio */ - tda9887_info(" E2-4 video if : %s\n", - rif[(buf[3] & 0x0c) >> 2]); - tda9887_info(" E7 vif agc output : %s\n", - (buf[3] & 0x80) - ? ((buf[3] & 0x10) ? "fm-agc radio" : "sif-agc radio") - : "fm radio carrier afc"); + tuner_info(" E2-4 video if : %s\n", + rif[(buf[3] & 0x0c) >> 2]); + tuner_info(" E7 vif agc output : %s\n", + (buf[3] & 0x80) + ? ((buf[3] & 0x10) ? "fm-agc radio" : + "sif-agc radio") + : "fm radio carrier afc"); } else { /* video */ - tda9887_info(" E2-4 video if : %s\n", - vif[(buf[3] & 0x1c) >> 2]); - tda9887_info(" E5 tuner gain : %s\n", - (buf[3] & 0x80) - ? ((buf[3] & 0x20) ? "external" : "normal") - : ((buf[3] & 0x20) ? "minimum" : "normal")); - tda9887_info(" E7 vif agc output : %s\n", - (buf[3] & 0x80) - ? ((buf[3] & 0x20) - ? "pin3 port, pin22 vif agc out" - : "pin22 port, pin3 vif acg ext in") - : "pin3+pin22 port"); + tuner_info(" E2-4 video if : %s\n", + vif[(buf[3] & 0x1c) >> 2]); + tuner_info(" E5 tuner gain : %s\n", + (buf[3] & 0x80) + ? ((buf[3] & 0x20) ? "external" : "normal") + : ((buf[3] & 0x20) ? "minimum" : "normal")); + tuner_info(" E7 vif agc output : %s\n", + (buf[3] & 0x80) ? ((buf[3] & 0x20) + ? "pin3 port, pin22 vif agc out" + : "pin22 port, pin3 vif acg ext in") + : "pin3+pin22 port"); } - tda9887_info("--\n"); + tuner_info("--\n"); } /* ---------------------------------------------------------------------- */ @@ -422,11 +417,11 @@ static int tda9887_set_tvnorm(struct dvb_frontend *fe) } } if (NULL == norm) { - tda9887_dbg("Unsupported tvnorm entry - audio muted\n"); + tuner_dbg("Unsupported tvnorm entry - audio muted\n"); return -1; } - tda9887_dbg("configure for: %s\n",norm->name); + tuner_dbg("configure for: %s\n", norm->name); buf[1] = norm->b; buf[2] = norm->c; buf[3] = norm->e; @@ -542,7 +537,7 @@ static int tda9887_status(struct dvb_frontend *fe) memset(buf,0,sizeof(buf)); if (1 != (rc = tuner_i2c_xfer_recv(&priv->i2c_props,buf,1))) - tda9887_info("i2c i/o error: rc == %d (should be 1)\n",rc); + tuner_info("i2c i/o error: rc == %d (should be 1)\n", rc); dump_read_message(fe, buf); return 0; } @@ -577,15 +572,15 @@ static void tda9887_configure(struct dvb_frontend *fe) if (priv->mode == T_STANDBY) priv->data[1] |= cForcedMuteAudioON; - tda9887_dbg("writing: b=0x%02x c=0x%02x e=0x%02x\n", - priv->data[1],priv->data[2],priv->data[3]); - if (tda9887_debug > 1) + tuner_dbg("writing: b=0x%02x c=0x%02x e=0x%02x\n", + priv->data[1], priv->data[2], priv->data[3]); + if (debug > 1) dump_write_message(fe, priv->data); if (4 != (rc = tuner_i2c_xfer_send(&priv->i2c_props,priv->data,4))) - tda9887_info("i2c i/o error: rc == %d (should be 4)\n",rc); + tuner_info("i2c i/o error: rc == %d (should be 4)\n", rc); - if (tda9887_debug > 2) { + if (debug > 2) { msleep_interruptible(1000); tda9887_status(fe); } @@ -596,8 +591,8 @@ static void tda9887_configure(struct dvb_frontend *fe) static void tda9887_tuner_status(struct dvb_frontend *fe) { struct tda9887_priv *priv = fe->analog_demod_priv; - tda9887_info("Data bytes: b=0x%02x c=0x%02x e=0x%02x\n", - priv->data[1], priv->data[2], priv->data[3]); + tuner_info("Data bytes: b=0x%02x c=0x%02x e=0x%02x\n", + priv->data[1], priv->data[2], priv->data[3]); } static int tda9887_get_afc(struct dvb_frontend *fe) @@ -680,7 +675,7 @@ struct dvb_frontend *tda9887_attach(struct dvb_frontend *fe, priv->i2c_props.addr = i2c_addr; priv->i2c_props.adap = i2c_adap; - tda9887_info("tda988[5/6/7] found\n"); + tuner_info("tda988[5/6/7] found\n"); fe->ops.analog_demod_ops = &tda9887_tuner_ops; -- cgit v1.2.3-59-g8ed1b From f7f427e4cc6078e23078dcd7f321676e0b0f544c Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 16 Dec 2007 22:02:26 -0300 Subject: V4L/DVB (6844): tuner: remove struct tuner from tuner-driver.h struct tuner holds state for tuner-core, only -- move it into tuner-core.c Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-core.c | 21 +++++++++++++++++++++ drivers/media/video/tuner-driver.h | 23 ----------------------- 2 files changed, 21 insertions(+), 23 deletions(-) diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index d51f3afa969d..f22c41bb97ef 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -33,6 +33,27 @@ #define PREFIX t->i2c->driver->driver.name +struct tuner { + /* device */ + struct dvb_frontend fe; + struct i2c_client *i2c; + struct list_head list; + unsigned int using_v4l2:1; + + /* keep track of the current settings */ + v4l2_std_id std; + unsigned int tv_freq; + unsigned int radio_freq; + unsigned int audmode; + + unsigned int mode; + unsigned int mode_mask; /* Combination of allowable modes */ + + unsigned int type; /* chip type id */ + unsigned int config; + int (*tuner_callback) (void *dev, int command, int arg); +}; + /* standard i2c insmod options */ static unsigned short normal_i2c[] = { #if defined(CONFIG_TUNER_TEA5761) || (defined(CONFIG_TUNER_TEA5761_MODULE) && defined(MODULE)) diff --git a/drivers/media/video/tuner-driver.h b/drivers/media/video/tuner-driver.h index 417753b7c3fa..7b1adfaf7aca 100644 --- a/drivers/media/video/tuner-driver.h +++ b/drivers/media/video/tuner-driver.h @@ -50,27 +50,4 @@ struct analog_tuner_ops { int (*set_config)(struct dvb_frontend *fe, void *priv_cfg); }; -struct tuner { - /* device */ - struct i2c_client *i2c; - struct list_head list; /* list of tuners */ - - unsigned int type; /* chip type */ - - unsigned int mode; - unsigned int mode_mask; /* Combination of allowable modes */ - - unsigned int tv_freq; /* keep track of the current settings */ - unsigned int radio_freq; - unsigned int audmode; - v4l2_std_id std; - - int using_v4l2; - - struct dvb_frontend fe; - - unsigned int config; - int (*tuner_callback) (void *dev, int command,int arg); -}; - #endif /* __TUNER_DRIVER_H__ */ -- cgit v1.2.3-59-g8ed1b From dabe61565e3b02bc4a841f317896536068f94e63 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 17 Dec 2007 01:21:08 -0300 Subject: V4L/DVB (6845): tuner: remove unneeded #includes from tuner-driver.h Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-driver.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/media/video/tuner-driver.h b/drivers/media/video/tuner-driver.h index 7b1adfaf7aca..5eaa30ccbda3 100644 --- a/drivers/media/video/tuner-driver.h +++ b/drivers/media/video/tuner-driver.h @@ -22,8 +22,6 @@ #ifndef __TUNER_DRIVER_H__ #define __TUNER_DRIVER_H__ -#include -#include #include "dvb_frontend.h" extern unsigned const int tuner_count; -- cgit v1.2.3-59-g8ed1b From 71021d2601c54eee6df3afaf79aed430b17e1366 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 17 Dec 2007 09:49:33 -0300 Subject: V4L/DVB (6846): tda9887: initialize mode to T_STANDBY at startup Ensure that the audio is muted at attach-time Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tda9887.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c index 5085cb902125..2abb76fba9a7 100644 --- a/drivers/media/video/tda9887.c +++ b/drivers/media/video/tda9887.c @@ -674,6 +674,7 @@ struct dvb_frontend *tda9887_attach(struct dvb_frontend *fe, priv->i2c_props.addr = i2c_addr; priv->i2c_props.adap = i2c_adap; + priv->mode = T_STANDBY; tuner_info("tda988[5/6/7] found\n"); -- cgit v1.2.3-59-g8ed1b From 9e7e85ebaeba22979209268423f5aae8a352df4c Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Mon, 17 Dec 2007 14:26:29 -0300 Subject: V4L/DVB (6848): bttv: check pci_register_driver() error Check pci_register_driver() error in module_init. Signed-off-by: Akinobu Mita Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bt8xx/bttv-driver.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index eb2c12eb2fc8..e04113f0b7e2 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -4404,14 +4404,17 @@ static int __init bttv_init_module(void) printk(KERN_WARNING "bttv: bus_register error: %d\n", ret); return ret; } - return pci_register_driver(&bttv_pci_driver); + ret = pci_register_driver(&bttv_pci_driver); + if (ret < 0) + bus_unregister(&bttv_sub_bus_type); + + return ret; } static void __exit bttv_cleanup_module(void) { pci_unregister_driver(&bttv_pci_driver); bus_unregister(&bttv_sub_bus_type); - return; } module_init(bttv_init_module); -- cgit v1.2.3-59-g8ed1b From aec2aef267203d9ac06ce3508682c0aa81a069dc Mon Sep 17 00:00:00 2001 From: Aurelien Jarno Date: Mon, 17 Dec 2007 13:49:17 -0300 Subject: V4L/DVB (em28xx): Add support for Pinnacle Dazzle DVC 100 The patch below adds the "Pinnacle Dazzle DVC 100" to the list of cards supported by the em28xx driver. As the configuration is the same as the DVC 90 one, it simply adds a new USB ID to the list of devices supported by the DVC 90 configuration. Signed-off-by: Aurelien Jarno Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.em28xx | 2 +- drivers/media/video/em28xx/em28xx-cards.c | 4 +++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index ceb277543f51..dbc19ca9e483 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -7,7 +7,7 @@ 6 -> Terratec Cinergy 200 USB (em2800) 7 -> Leadtek Winfast USB II (em2800) 8 -> Kworld USB2800 (em2800) - 9 -> Pinnacle Dazzle DVC 90 (em2820/em2840) [2304:0207] + 9 -> Pinnacle Dazzle DVC 90/DVC 100 (em2820/em2840) [2304:0207,2304:021a] 10 -> Hauppauge WinTV HVR 900 (em2880) [2040:6500] 11 -> Terratec Hybrid XS (em2880) [0ccd:0042] 12 -> Kworld PVR TV 2800 RF (em2820/em2840) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index c4204c90fb01..e00de3286055 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -329,7 +329,7 @@ struct em28xx_board em28xx_boards[] = { } }, }, [EM2820_BOARD_PINNACLE_DVC_90] = { - .name = "Pinnacle Dazzle DVC 90", + .name = "Pinnacle Dazzle DVC 90/DVC 100", .vchannels = 3, .has_tuner = 0, .decoder = EM28XX_SAA7113, @@ -416,6 +416,8 @@ struct usb_device_id em28xx_id_table [] = { .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, { USB_DEVICE(0x2304, 0x0207), .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, + { USB_DEVICE(0x2304, 0x021a), + .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, { USB_DEVICE(0x2040, 0x6500), .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 }, { USB_DEVICE(0x2040, 0x6513), -- cgit v1.2.3-59-g8ed1b From e026268870b5f05a3f74b37816d96ed3b19a9e33 Mon Sep 17 00:00:00 2001 From: Chris Pascoe Date: Sun, 2 Dec 2007 06:30:50 -0300 Subject: V4L/DVB (6851): xc2028: include int_freq in firmware version display Add "int_freq" to the debugging output when selecting firmware and the HAS_IF flag when dumping firmware during load. Signed-off-by: Chris Pascoe Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-xc2028.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/drivers/media/video/tuner-xc2028.c b/drivers/media/video/tuner-xc2028.c index fd248a19c259..416c717eb78e 100644 --- a/drivers/media/video/tuner-xc2028.c +++ b/drivers/media/video/tuner-xc2028.c @@ -144,7 +144,8 @@ static unsigned int xc2028_get_reg(struct xc2028_data *priv, u16 reg, u16 *val) return 0; } -void dump_firm_type(unsigned int type) +#define dump_firm_type(t) dump_firm_type_and_int_freq(t, 0) +void dump_firm_type_and_int_freq(unsigned int type, u16 int_freq) { if (type & BASE) printk("BASE "); @@ -206,6 +207,8 @@ void dump_firm_type(unsigned int type) printk("INPUT2 "); if (type & SCODE) printk("SCODE "); + if (type & HAS_IF) + printk("HAS_IF_%d ", int_freq); } static v4l2_std_id parse_audio_std_option(void) @@ -350,9 +353,9 @@ static int load_all_firmwares(struct dvb_frontend *fe) } tuner_dbg("Reading firmware type "); if (debug) { - dump_firm_type(type); + dump_firm_type_and_int_freq(type, int_freq); printk("(%x), id %llx, size=%d.\n", - type, (unsigned long long)id, size); + type, (unsigned long long)id, size); } memcpy(priv->firm[n].ptr, p, size); @@ -612,7 +615,8 @@ static int load_scode(struct dvb_frontend *fe, unsigned int type, } tuner_info("Loading SCODE for type="); - dump_firm_type(priv->firm[pos].type); + dump_firm_type_and_int_freq(priv->firm[pos].type, + priv->firm[pos].int_freq); printk("(%x), id %016llx.\n", priv->firm[pos].type, (unsigned long long)*id); @@ -670,11 +674,15 @@ retry: tuner_dbg("checking firmware, user requested type="); if (debug) { dump_firm_type(new_fw.type); - printk("(%x), id %016llx, scode_tbl ", new_fw.type, + printk("(%x), id %016llx, ", new_fw.type, (unsigned long long)new_fw.std_req); - dump_firm_type(priv->ctrl.scode_table); - printk("(%x), scode_nr %d\n", priv->ctrl.scode_table, - new_fw.scode_nr); + if (!int_freq) { + printk("scode_tbl "); + dump_firm_type(priv->ctrl.scode_table); + printk("(%x), ", priv->ctrl.scode_table); + } else + printk("int_freq %d, ", new_fw.int_freq); + printk("scode_nr %d\n", new_fw.scode_nr); } /* No need to reload base firmware if it matches */ -- cgit v1.2.3-59-g8ed1b From ad35ce9e3e03b1515c8581bababb0e64d05cf1ad Mon Sep 17 00:00:00 2001 From: Chris Pascoe Date: Sun, 2 Dec 2007 06:36:42 -0300 Subject: V4L/DVB (6852): xc2028: s-code offset should not modify internal control structure Don't modify the control structure that was provided at attach when applying an offset to the S-Code, otherwise it will be incorrect on subsequent tunes. Signed-off-by: Chris Pascoe Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-xc2028.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/tuner-xc2028.c b/drivers/media/video/tuner-xc2028.c index 416c717eb78e..81cc7f607d4e 100644 --- a/drivers/media/video/tuner-xc2028.c +++ b/drivers/media/video/tuner-xc2028.c @@ -956,6 +956,7 @@ static int xc2028_set_params(struct dvb_frontend *fe, struct xc2028_data *priv = fe->tuner_priv; unsigned int type=0; fe_bandwidth_t bw = BANDWIDTH_8_MHZ; + u16 demod = 0; tuner_dbg("%s called\n", __FUNCTION__); @@ -1009,10 +1010,10 @@ static int xc2028_set_params(struct dvb_frontend *fe, /* All S-code tables need a 200kHz shift */ if (priv->ctrl.demod) - priv->ctrl.demod += 200; + demod = priv->ctrl.demod + 200; return generic_set_freq(fe, p->frequency, - T_DIGITAL_TV, type, 0, priv->ctrl.demod); + T_DIGITAL_TV, type, 0, demod); } static int xc2028_sleep(struct dvb_frontend *fe) -- cgit v1.2.3-59-g8ed1b From 9ca01e780f8966a7a94f88ef5c54f340e117abea Mon Sep 17 00:00:00 2001 From: Chris Pascoe Date: Sun, 2 Dec 2007 06:54:17 -0300 Subject: V4L/DVB (6853): xc2028: check HAS_IF flag against table When searching for the right S-Code table to load, check the HAS_IF flag against the firmware we are checking instead of against the the "type" requested. We already ignore the scode type requested if the caller passed an int_freq; this makes the search by frequency consistent with that behaviour. Signed-off-by: Chris Pascoe Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-xc2028.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/tuner-xc2028.c b/drivers/media/video/tuner-xc2028.c index 81cc7f607d4e..a6b05dfd6703 100644 --- a/drivers/media/video/tuner-xc2028.c +++ b/drivers/media/video/tuner-xc2028.c @@ -592,7 +592,7 @@ static int load_scode(struct dvb_frontend *fe, unsigned int type, } else { for (pos = 0; pos < priv->firm_size; pos++) { if ((priv->firm[pos].int_freq == int_freq) && - (type & HAS_IF)) + (priv->firm[pos].type & HAS_IF)) break; } if (pos == priv->firm_size) @@ -601,7 +601,7 @@ static int load_scode(struct dvb_frontend *fe, unsigned int type, p = priv->firm[pos].ptr; - if (type & HAS_IF) { + if (priv->firm[pos].type & HAS_IF) { if (priv->firm[pos].size != 12 * 16 || scode >= 16) return -EINVAL; p += 12 * scode; -- cgit v1.2.3-59-g8ed1b From 897b842296f1285a6b58e9170f7017022e2e2603 Mon Sep 17 00:00:00 2001 From: Chris Pascoe Date: Sun, 2 Dec 2007 09:39:18 -0300 Subject: V4L/DVB (6854): xc2028: be more specific about when applying offset for 7MHz channels We have been inserting a mystery 500kHz offset for tuning 7MHz channels, however some experimentation reveals it is only needed under certain conditions with specific firmware combinations. Document these and only apply the offset when we know it is required. Signed-off-by: Chris Pascoe Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-xc2028.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/tuner-xc2028.c b/drivers/media/video/tuner-xc2028.c index a6b05dfd6703..63a6fca1f8cf 100644 --- a/drivers/media/video/tuner-xc2028.c +++ b/drivers/media/video/tuner-xc2028.c @@ -875,7 +875,16 @@ static int generic_set_freq(struct dvb_frontend *fe, u32 freq /* in HZ */, rc = send_seq(priv, {0x00, 0x00}); } else { offset = 2750000; - if (priv->cur_fw.type & DTV7) + /* + * We must adjust the offset by 500kHz in two cases in order + * to correctly center the IF output: + * 1) When the ZARLINK456 or DIBCOM52 tables were explicitly + * selected and a 7MHz channel is tuned; + * 2) When tuning a VHF channel with DTV78 firmware. + */ + if (((priv->cur_fw.type & DTV7) && + (priv->cur_fw.scode_table & (ZARLINK456 | DIBCOM52))) || + ((priv->cur_fw.type & DTV78) && freq < 470000000)) offset -= 500000; } -- cgit v1.2.3-59-g8ed1b From 3dfefc50ff45744ffb97ce0bf9c213a3fb6d5d3d Mon Sep 17 00:00:00 2001 From: Chris Pascoe Date: Sun, 2 Dec 2007 10:07:06 -0300 Subject: V4L/DVB (6855): xc2028: select DTV78 firmware if tuning 7MHz VHF / 8MHz UHF It seems that the DTV78 firmware is intended for use in locations where VHF channels have 7MHz bandwidth and UHF channels have 8MHz bandwidth. If we switch to DTV78 firmware when we detect this condition, we can avoid firmware reloads when switching between VHF and UHF transponders. Place the state for this in the control structure so that card drivers can hint to us to use DTV78 firmware from the first tuning attempt. Signed-off-by: Chris Pascoe Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-xc2028.c | 23 +++++++++++++++-------- drivers/media/video/tuner-xc2028.h | 2 ++ 2 files changed, 17 insertions(+), 8 deletions(-) diff --git a/drivers/media/video/tuner-xc2028.c b/drivers/media/video/tuner-xc2028.c index 63a6fca1f8cf..0565edd224bc 100644 --- a/drivers/media/video/tuner-xc2028.c +++ b/drivers/media/video/tuner-xc2028.c @@ -998,20 +998,27 @@ static int xc2028_set_params(struct dvb_frontend *fe, return -EINVAL; } - /* FIXME: - There are two Scodes that will never be selected: - DTV78 ZARLINK456, DTV78 DIBCOM52 - When it should opt for DTV78 instead of DTV7 or DTV8? - */ switch (bw) { case BANDWIDTH_8_MHZ: - type |= DTV8 | F8MHZ; + if (p->frequency < 470000000) + priv->ctrl.vhfbw7 = 0; + else + priv->ctrl.uhfbw8 = 1; + type |= (priv->ctrl.vhfbw7 && priv->ctrl.uhfbw8) ? DTV78 : DTV8; + type |= F8MHZ; break; case BANDWIDTH_7_MHZ: - type |= DTV7 | F8MHZ; + if (p->frequency < 470000000) + priv->ctrl.vhfbw7 = 1; + else + priv->ctrl.uhfbw8 = 0; + type |= (priv->ctrl.vhfbw7 && priv->ctrl.uhfbw8) ? DTV78 : DTV7; + type |= F8MHZ; break; case BANDWIDTH_6_MHZ: - type |= DTV6 ; + type |= DTV6; + priv->ctrl.vhfbw7 = 0; + priv->ctrl.uhfbw8 = 0; break; default: tuner_err("error: bandwidth not supported.\n"); diff --git a/drivers/media/video/tuner-xc2028.h b/drivers/media/video/tuner-xc2028.h index 1fe8b195960c..7462629b98fd 100644 --- a/drivers/media/video/tuner-xc2028.h +++ b/drivers/media/video/tuner-xc2028.h @@ -30,6 +30,8 @@ struct xc2028_ctrl { unsigned int mts :1; unsigned int d2633 :1; unsigned int input1:1; + unsigned int vhfbw7:1; + unsigned int uhfbw8:1; unsigned int demod; }; -- cgit v1.2.3-59-g8ed1b From bc514710889ebb975be9e84ca9c04f698225b656 Mon Sep 17 00:00:00 2001 From: Chris Pascoe Date: Sat, 15 Dec 2007 03:24:00 -0300 Subject: V4L/DVB (6856): zl10353: improve tuning parameters and update register map Some more I2C traces and a experimentation with register values on both the ZL10353 and MT352 mean that I can now guess at what more of the ZL10353 registers do. Guess at the registers' names (based on the equivalent names in MT352) and update set_parameters/get_parameters with the new knowledge. Signed-off-by: Chris Pascoe Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/zl10353.c | 243 +++++++++++++++++++++++++++-- drivers/media/dvb/frontends/zl10353_priv.h | 15 ++ 2 files changed, 245 insertions(+), 13 deletions(-) diff --git a/drivers/media/dvb/frontends/zl10353.c b/drivers/media/dvb/frontends/zl10353.c index e874ec8df60c..276e3b631dc2 100644 --- a/drivers/media/dvb/frontends/zl10353.c +++ b/drivers/media/dvb/frontends/zl10353.c @@ -36,6 +36,8 @@ struct zl10353_state { struct dvb_frontend frontend; struct zl10353_config config; + + enum fe_bandwidth bandwidth; }; static int debug; @@ -195,27 +197,156 @@ static int zl10353_set_parameters(struct dvb_frontend *fe, { struct zl10353_state *state = fe->demodulator_priv; u16 nominal_rate, input_freq; - u8 pllbuf[6] = { 0x67 }; + u8 pllbuf[6] = { 0x67 }, acq_ctl = 0; + u16 tps = 0; + struct dvb_ofdm_parameters *op = ¶m->u.ofdm; - /* These settings set "auto-everything" and start the FSM. */ - zl10353_single_write(fe, 0x55, 0x80); + zl10353_single_write(fe, RESET, 0x80); udelay(200); zl10353_single_write(fe, 0xEA, 0x01); udelay(200); zl10353_single_write(fe, 0xEA, 0x00); - zl10353_single_write(fe, 0x56, 0x28); - zl10353_single_write(fe, 0x89, 0x20); - zl10353_single_write(fe, 0x5E, 0x00); + zl10353_single_write(fe, AGC_TARGET, 0x28); + + if (op->transmission_mode != TRANSMISSION_MODE_AUTO) + acq_ctl |= (1 << 0); + if (op->guard_interval != GUARD_INTERVAL_AUTO) + acq_ctl |= (1 << 1); + zl10353_single_write(fe, ACQ_CTL, acq_ctl); - zl10353_calc_nominal_rate(fe, param->u.ofdm.bandwidth, &nominal_rate); + switch (op->bandwidth) { + case BANDWIDTH_6_MHZ: + /* These are extrapolated from the 7 and 8MHz values */ + zl10353_single_write(fe, MCLK_RATIO, 0x97); + zl10353_single_write(fe, 0x64, 0x34); + break; + case BANDWIDTH_7_MHZ: + zl10353_single_write(fe, MCLK_RATIO, 0x86); + zl10353_single_write(fe, 0x64, 0x35); + break; + case BANDWIDTH_8_MHZ: + default: + zl10353_single_write(fe, MCLK_RATIO, 0x75); + zl10353_single_write(fe, 0x64, 0x36); + } + + zl10353_calc_nominal_rate(fe, op->bandwidth, &nominal_rate); zl10353_single_write(fe, TRL_NOMINAL_RATE_1, msb(nominal_rate)); zl10353_single_write(fe, TRL_NOMINAL_RATE_0, lsb(nominal_rate)); + state->bandwidth = op->bandwidth; zl10353_calc_input_freq(fe, &input_freq); zl10353_single_write(fe, INPUT_FREQ_1, msb(input_freq)); zl10353_single_write(fe, INPUT_FREQ_0, lsb(input_freq)); + /* Hint at TPS settings */ + switch (op->code_rate_HP) { + case FEC_2_3: + tps |= (1 << 7); + break; + case FEC_3_4: + tps |= (2 << 7); + break; + case FEC_5_6: + tps |= (3 << 7); + break; + case FEC_7_8: + tps |= (4 << 7); + break; + case FEC_1_2: + case FEC_AUTO: + break; + default: + return -EINVAL; + } + + switch (op->code_rate_LP) { + case FEC_2_3: + tps |= (1 << 4); + break; + case FEC_3_4: + tps |= (2 << 4); + break; + case FEC_5_6: + tps |= (3 << 4); + break; + case FEC_7_8: + tps |= (4 << 4); + break; + case FEC_1_2: + case FEC_AUTO: + break; + case FEC_NONE: + if (op->hierarchy_information == HIERARCHY_AUTO || + op->hierarchy_information == HIERARCHY_NONE) + break; + default: + return -EINVAL; + } + + switch (op->constellation) { + case QPSK: + break; + case QAM_AUTO: + case QAM_16: + tps |= (1 << 13); + break; + case QAM_64: + tps |= (2 << 13); + break; + default: + return -EINVAL; + } + + switch (op->transmission_mode) { + case TRANSMISSION_MODE_2K: + case TRANSMISSION_MODE_AUTO: + break; + case TRANSMISSION_MODE_8K: + tps |= (1 << 0); + break; + default: + return -EINVAL; + } + + switch (op->guard_interval) { + case GUARD_INTERVAL_1_32: + case GUARD_INTERVAL_AUTO: + break; + case GUARD_INTERVAL_1_16: + tps |= (1 << 2); + break; + case GUARD_INTERVAL_1_8: + tps |= (2 << 2); + break; + case GUARD_INTERVAL_1_4: + tps |= (3 << 2); + break; + default: + return -EINVAL; + } + + switch (op->hierarchy_information) { + case HIERARCHY_AUTO: + case HIERARCHY_NONE: + break; + case HIERARCHY_1: + tps |= (1 << 10); + break; + case HIERARCHY_2: + tps |= (2 << 10); + break; + case HIERARCHY_4: + tps |= (3 << 10); + break; + default: + return -EINVAL; + } + + zl10353_single_write(fe, TPS_GIVEN_1, msb(tps)); + zl10353_single_write(fe, TPS_GIVEN_0, lsb(tps)); + if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); @@ -244,12 +375,97 @@ static int zl10353_set_parameters(struct dvb_frontend *fe, else zl10353_single_write(fe, TUNER_GO, 0x01); - udelay(250); - zl10353_single_write(fe, 0xE4, 0x00); - zl10353_single_write(fe, 0xE5, 0x2A); - zl10353_single_write(fe, 0xE9, 0x02); - zl10353_single_write(fe, 0xE7, 0x40); - zl10353_single_write(fe, 0xE8, 0x10); + return 0; +} + +static int zl10353_get_parameters(struct dvb_frontend *fe, + struct dvb_frontend_parameters *param) +{ + struct zl10353_state *state = fe->demodulator_priv; + struct dvb_ofdm_parameters *op = ¶m->u.ofdm; + int s6, s9; + u16 tps; + static const u8 tps_fec_to_api[8] = { + FEC_1_2, + FEC_2_3, + FEC_3_4, + FEC_5_6, + FEC_7_8, + FEC_AUTO, + FEC_AUTO, + FEC_AUTO + }; + + s6 = zl10353_read_register(state, STATUS_6); + s9 = zl10353_read_register(state, STATUS_9); + if (s6 < 0 || s9 < 0) + return -EREMOTEIO; + if ((s6 & (1 << 5)) == 0 || (s9 & (1 << 4)) == 0) + return -EINVAL; /* no FE or TPS lock */ + + tps = zl10353_read_register(state, TPS_RECEIVED_1) << 8 | + zl10353_read_register(state, TPS_RECEIVED_0); + + op->code_rate_HP = tps_fec_to_api[(tps >> 7) & 7]; + op->code_rate_LP = tps_fec_to_api[(tps >> 4) & 7]; + + switch ((tps >> 13) & 3) { + case 0: + op->constellation = QPSK; + break; + case 1: + op->constellation = QAM_16; + break; + case 2: + op->constellation = QAM_64; + break; + default: + op->constellation = QAM_AUTO; + break; + } + + op->transmission_mode = (tps & 0x01) ? TRANSMISSION_MODE_8K : + TRANSMISSION_MODE_2K; + + switch ((tps >> 2) & 3) { + case 0: + op->guard_interval = GUARD_INTERVAL_1_32; + break; + case 1: + op->guard_interval = GUARD_INTERVAL_1_16; + break; + case 2: + op->guard_interval = GUARD_INTERVAL_1_8; + break; + case 3: + op->guard_interval = GUARD_INTERVAL_1_4; + break; + default: + op->guard_interval = GUARD_INTERVAL_AUTO; + break; + } + + switch ((tps >> 10) & 7) { + case 0: + op->hierarchy_information = HIERARCHY_NONE; + break; + case 1: + op->hierarchy_information = HIERARCHY_1; + break; + case 2: + op->hierarchy_information = HIERARCHY_2; + break; + case 3: + op->hierarchy_information = HIERARCHY_4; + break; + default: + op->hierarchy_information = HIERARCHY_AUTO; + break; + } + + param->frequency = 0; + op->bandwidth = state->bandwidth; + param->inversion = INVERSION_AUTO; return 0; } @@ -438,6 +654,7 @@ static struct dvb_frontend_ops zl10353_ops = { .write = zl10353_write, .set_frontend = zl10353_set_parameters, + .get_frontend = zl10353_get_parameters, .get_tune_settings = zl10353_get_tune_settings, .read_status = zl10353_read_status, diff --git a/drivers/media/dvb/frontends/zl10353_priv.h b/drivers/media/dvb/frontends/zl10353_priv.h index fcad9221945e..055ff1f7e349 100644 --- a/drivers/media/dvb/frontends/zl10353_priv.h +++ b/drivers/media/dvb/frontends/zl10353_priv.h @@ -46,13 +46,28 @@ enum zl10353_reg_addr { RS_ERR_CNT_0 = 0x13, RS_UBC_1 = 0x14, RS_UBC_0 = 0x15, + TPS_RECEIVED_1 = 0x1D, + TPS_RECEIVED_0 = 0x1E, + TPS_CURRENT_1 = 0x1F, + TPS_CURRENT_0 = 0x20, + RESET = 0x55, + AGC_TARGET = 0x56, + MCLK_RATIO = 0x5C, + ACQ_CTL = 0x5E, TRL_NOMINAL_RATE_1 = 0x65, TRL_NOMINAL_RATE_0 = 0x66, INPUT_FREQ_1 = 0x6C, INPUT_FREQ_0 = 0x6D, + TPS_GIVEN_1 = 0x6E, + TPS_GIVEN_0 = 0x6F, TUNER_GO = 0x70, FSM_GO = 0x71, CHIP_ID = 0x7F, + CHAN_STEP_1 = 0xE4, + CHAN_STEP_0 = 0xE5, + OFDM_LOCK_TIME = 0xE7, + FEC_LOCK_TIME = 0xE8, + ACQ_DELAY = 0xE9, }; #endif /* _ZL10353_PRIV_ */ -- cgit v1.2.3-59-g8ed1b From 5e3c5967da48b54e5d4ee528b51b565e2f7a3178 Mon Sep 17 00:00:00 2001 From: Chris Pascoe Date: Sat, 15 Dec 2007 03:31:09 -0300 Subject: V4L/DVB (6857): cx23885: correctly join I2C writes and reads from same address When an I2C message specifies a write then a read from the same I2C address, we need to tell the chip to not release the bus between the message parts. Signed-off-by: Chris Pascoe Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/cx23885-i2c.c | 53 +++++++++++++++++++++++-------- 1 file changed, 39 insertions(+), 14 deletions(-) diff --git a/drivers/media/video/cx23885/cx23885-i2c.c b/drivers/media/video/cx23885/cx23885-i2c.c index 08e92df33168..20f3fb450f88 100644 --- a/drivers/media/video/cx23885/cx23885-i2c.c +++ b/drivers/media/video/cx23885/cx23885-i2c.c @@ -37,8 +37,10 @@ static unsigned int i2c_scan = 0; module_param(i2c_scan, int, 0444); MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time"); -#define dprintk(level,fmt, arg...) if (i2c_debug >= level) \ - printk(KERN_DEBUG "%s: " fmt, dev->name , ## arg) +#define dprintk(level, fmt, arg...) do { \ + if (i2c_debug >= level) \ + printk(KERN_DEBUG "%s: " fmt, dev->name , ## arg); \ + } while (0) #define I2C_WAIT_DELAY 32 #define I2C_WAIT_RETRY 64 @@ -77,14 +79,18 @@ static int i2c_wait_done(struct i2c_adapter *i2c_adap) } static int i2c_sendbytes(struct i2c_adapter *i2c_adap, - const struct i2c_msg *msg, int last) + const struct i2c_msg *msg, int joined_rlen) { struct cx23885_i2c *bus = i2c_adap->algo_data; struct cx23885_dev *dev = bus->dev; u32 wdata, addr, ctrl; int retval, cnt; - dprintk(1, "%s(msg->len=%d, last=%d)\n", __FUNCTION__, msg->len, last); + if (joined_rlen) + dprintk(1, "%s(msg->wlen=%d, nextmsg->rlen=%d)\n", __FUNCTION__, + msg->len, joined_rlen); + else + dprintk(1, "%s(msg->len=%d)\n", __FUNCTION__, msg->len); /* Deal with i2c probe functions with zero payload */ if (msg->len == 0) { @@ -107,6 +113,8 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap, if (msg->len > 1) ctrl |= I2C_NOSTOP | I2C_EXTEND; + else if (joined_rlen) + ctrl |= I2C_NOSTOP; cx_write(bus->reg_addr, addr); cx_write(bus->reg_wdata, wdata); @@ -130,6 +138,8 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap, if (cnt < msg->len - 1) ctrl |= I2C_NOSTOP | I2C_EXTEND; + else if (joined_rlen) + ctrl |= I2C_NOSTOP; cx_write(bus->reg_addr, addr); cx_write(bus->reg_wdata, wdata); @@ -151,19 +161,22 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap, eio: retval = -EIO; err: - printk(" ERR: %d\n", retval); + if (i2c_debug) + printk(" ERR: %d\n", retval); return retval; } static int i2c_readbytes(struct i2c_adapter *i2c_adap, - const struct i2c_msg *msg, int last) + const struct i2c_msg *msg, int joined) { struct cx23885_i2c *bus = i2c_adap->algo_data; struct cx23885_dev *dev = bus->dev; u32 ctrl, cnt; int retval; - dprintk(1, "%s(msg->len=%d, last=%d)\n", __FUNCTION__, msg->len, last); + + if (i2c_debug && !joined) + dprintk(1, "%s(msg->len=%d)\n", __FUNCTION__, msg->len); /* Deal with i2c probe functions with zero payload */ if (msg->len == 0) { @@ -179,8 +192,12 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap, return 0; } - if (i2c_debug) - printk(" addr << 1) + 1); + if (i2c_debug) { + if (joined) + printk(" R"); + else + printk(" addr << 1) + 1); + } for(cnt = 0; cnt < msg->len; cnt++) { @@ -209,7 +226,8 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap, eio: retval = -EIO; err: - printk(" ERR: %d\n", retval); + if (i2c_debug) + printk(" ERR: %d\n", retval); return retval; } @@ -227,15 +245,22 @@ static int i2c_xfer(struct i2c_adapter *i2c_adap, __FUNCTION__, num, msgs[i].addr, msgs[i].len); if (msgs[i].flags & I2C_M_RD) { /* read */ - retval = i2c_readbytes(i2c_adap, &msgs[i], i+1 == num); + retval = i2c_readbytes(i2c_adap, &msgs[i], 0); + } else if (i + 1 < num && (msgs[i + 1].flags & I2C_M_RD) && + msgs[i].addr == msgs[i + 1].addr) { + /* write then read from same address */ + retval = i2c_sendbytes(i2c_adap, &msgs[i], + msgs[i + 1].len); if (retval < 0) goto err; + i++; + retval = i2c_readbytes(i2c_adap, &msgs[i], 1); } else { /* write */ - retval = i2c_sendbytes(i2c_adap, &msgs[i], i+1 == num); - if (retval < 0) - goto err; + retval = i2c_sendbytes(i2c_adap, &msgs[i], 0); } + if (retval < 0) + goto err; } return num; -- cgit v1.2.3-59-g8ed1b From 3ac510e6097368695ddff20918ab5822823b548e Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 18 Dec 2007 00:30:52 -0300 Subject: V4L/DVB (6858): Fix offset for ATSC ATSC works with offset=0 Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-xc2028.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/tuner-xc2028.c b/drivers/media/video/tuner-xc2028.c index 0565edd224bc..d367f205c98a 100644 --- a/drivers/media/video/tuner-xc2028.c +++ b/drivers/media/video/tuner-xc2028.c @@ -873,7 +873,7 @@ static int generic_set_freq(struct dvb_frontend *fe, u32 freq /* in HZ */, */ if (new_mode == T_ANALOG_TV) { rc = send_seq(priv, {0x00, 0x00}); - } else { + } else if (!(priv->cur_fw.type & ATSC)) { offset = 2750000; /* * We must adjust the offset by 500kHz in two cases in order -- cgit v1.2.3-59-g8ed1b From 5412c8204f8c4f733acef511979fe1a738b74767 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 12 Dec 2007 06:21:58 -0300 Subject: V4L/DVB (6859): tveeprom: add support for Hauppauge models 74xxx Thanks to Steve Toth from Hauppauge with providing me with the information needed to add support for these models. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tveeprom.c | 31 +++++++++++++++++++------------ 1 file changed, 19 insertions(+), 12 deletions(-) diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c index 403fbd0afa3f..4d294e2becb9 100644 --- a/drivers/media/video/tveeprom.c +++ b/drivers/media/video/tveeprom.c @@ -405,9 +405,9 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, ** # of inputs/outputs ??? */ - int i, j, len, done, beenhere, tag,start; + int i, j, len, done, beenhere, tag, start; - int tuner1 = 0, t_format1 = 0, audioic=-1; + int tuner1 = 0, t_format1 = 0, audioic = -1; char *t_name1 = NULL; const char *t_fmt_name1[8] = { " none", "", "", "", "", "", "", "" }; @@ -418,17 +418,24 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, memset(tvee, 0, sizeof(*tvee)); done = len = beenhere = 0; - /* Hack for processing eeprom for em28xx and cx 2388x*/ - if ((eeprom_data[0] == 0x1a) && (eeprom_data[1] == 0xeb) && - (eeprom_data[2] == 0x67) && (eeprom_data[3] == 0x95)) - start=0xa0; /* Generic em28xx offset */ - else if (((eeprom_data[0] & 0xe1) == 0x01) && - (eeprom_data[1] == 0x00) && - (eeprom_data[2] == 0x00) && - (eeprom_data[8] == 0x84)) - start=8; /* Generic cx2388x offset */ + /* Different eeprom start offsets for em28xx, cx2388x and cx23418 */ + if (eeprom_data[0] == 0x1a && + eeprom_data[1] == 0xeb && + eeprom_data[2] == 0x67 && + eeprom_data[3] == 0x95) + start = 0xa0; /* Generic em28xx offset */ + else if ((eeprom_data[0] & 0xe1) == 0x01 && + eeprom_data[1] == 0x00 && + eeprom_data[2] == 0x00 && + eeprom_data[8] == 0x84) + start = 8; /* Generic cx2388x offset */ + else if (eeprom_data[1] == 0x70 && + eeprom_data[2] == 0x00 && + eeprom_data[4] == 0x74 && + eeprom_data[8] == 0x84) + start = 8; /* Generic cx23418 offset (models 74xxx) */ else - start=0; + start = 0; for (i = start; !done && i < 256; i += len) { if (eeprom_data[i] == 0x84) { -- cgit v1.2.3-59-g8ed1b From f19a73d620c5412e2413b778f4dad21febdd6115 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 12 Dec 2007 06:50:20 -0300 Subject: V4L/DVB (6860): tveeprom: CodingStyle cleanup Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tveeprom.c | 471 +++++++++++++++++++++-------------------- 1 file changed, 237 insertions(+), 234 deletions(-) diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c index 4d294e2becb9..11c15787e25f 100644 --- a/drivers/media/video/tveeprom.c +++ b/drivers/media/video/tveeprom.c @@ -46,11 +46,12 @@ MODULE_DESCRIPTION("i2c Hauppauge eeprom decoder driver"); MODULE_AUTHOR("John Klar"); MODULE_LICENSE("GPL"); -static int debug = 0; +static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Debug level (0-1)"); -#define STRM(array,i) (i < sizeof(array)/sizeof(char*) ? array[i] : "unknown") +#define STRM(array, i) \ + (i < sizeof(array) / sizeof(char *) ? array[i] : "unknown") #define tveeprom_info(fmt, arg...) \ v4l_printk(KERN_INFO, "tveeprom", c->adapter, c->addr, fmt , ## arg) @@ -58,7 +59,8 @@ MODULE_PARM_DESC(debug, "Debug level (0-1)"); v4l_printk(KERN_WARNING, "tveeprom", c->adapter, c->addr, fmt , ## arg) #define tveeprom_dbg(fmt, arg...) do { \ if (debug) \ - v4l_printk(KERN_DEBUG, "tveeprom", c->adapter, c->addr, fmt , ## arg); \ + v4l_printk(KERN_DEBUG, "tveeprom", \ + c->adapter, c->addr, fmt , ## arg); \ } while (0) /* @@ -94,170 +96,170 @@ static struct HAUPPAUGE_TUNER hauppauge_tuner[] = { /* 0-9 */ - { TUNER_ABSENT, "None" }, - { TUNER_ABSENT, "External" }, - { TUNER_ABSENT, "Unspecified" }, - { TUNER_PHILIPS_PAL, "Philips FI1216" }, - { TUNER_PHILIPS_SECAM, "Philips FI1216MF" }, - { TUNER_PHILIPS_NTSC, "Philips FI1236" }, - { TUNER_PHILIPS_PAL_I, "Philips FI1246" }, - { TUNER_PHILIPS_PAL_DK,"Philips FI1256" }, - { TUNER_PHILIPS_PAL, "Philips FI1216 MK2" }, - { TUNER_PHILIPS_SECAM, "Philips FI1216MF MK2" }, + { TUNER_ABSENT, "None" }, + { TUNER_ABSENT, "External" }, + { TUNER_ABSENT, "Unspecified" }, + { TUNER_PHILIPS_PAL, "Philips FI1216" }, + { TUNER_PHILIPS_SECAM, "Philips FI1216MF" }, + { TUNER_PHILIPS_NTSC, "Philips FI1236" }, + { TUNER_PHILIPS_PAL_I, "Philips FI1246" }, + { TUNER_PHILIPS_PAL_DK, "Philips FI1256" }, + { TUNER_PHILIPS_PAL, "Philips FI1216 MK2" }, + { TUNER_PHILIPS_SECAM, "Philips FI1216MF MK2" }, /* 10-19 */ - { TUNER_PHILIPS_NTSC, "Philips FI1236 MK2" }, - { TUNER_PHILIPS_PAL_I, "Philips FI1246 MK2" }, - { TUNER_PHILIPS_PAL_DK,"Philips FI1256 MK2" }, - { TUNER_TEMIC_NTSC, "Temic 4032FY5" }, - { TUNER_TEMIC_PAL, "Temic 4002FH5" }, - { TUNER_TEMIC_PAL_I, "Temic 4062FY5" }, - { TUNER_PHILIPS_PAL, "Philips FR1216 MK2" }, - { TUNER_PHILIPS_SECAM, "Philips FR1216MF MK2" }, - { TUNER_PHILIPS_NTSC, "Philips FR1236 MK2" }, - { TUNER_PHILIPS_PAL_I, "Philips FR1246 MK2" }, + { TUNER_PHILIPS_NTSC, "Philips FI1236 MK2" }, + { TUNER_PHILIPS_PAL_I, "Philips FI1246 MK2" }, + { TUNER_PHILIPS_PAL_DK, "Philips FI1256 MK2" }, + { TUNER_TEMIC_NTSC, "Temic 4032FY5" }, + { TUNER_TEMIC_PAL, "Temic 4002FH5" }, + { TUNER_TEMIC_PAL_I, "Temic 4062FY5" }, + { TUNER_PHILIPS_PAL, "Philips FR1216 MK2" }, + { TUNER_PHILIPS_SECAM, "Philips FR1216MF MK2" }, + { TUNER_PHILIPS_NTSC, "Philips FR1236 MK2" }, + { TUNER_PHILIPS_PAL_I, "Philips FR1246 MK2" }, /* 20-29 */ - { TUNER_PHILIPS_PAL_DK,"Philips FR1256 MK2" }, - { TUNER_PHILIPS_PAL, "Philips FM1216" }, - { TUNER_PHILIPS_SECAM, "Philips FM1216MF" }, - { TUNER_PHILIPS_NTSC, "Philips FM1236" }, - { TUNER_PHILIPS_PAL_I, "Philips FM1246" }, - { TUNER_PHILIPS_PAL_DK,"Philips FM1256" }, - { TUNER_TEMIC_4036FY5_NTSC, "Temic 4036FY5" }, - { TUNER_ABSENT, "Samsung TCPN9082D" }, - { TUNER_ABSENT, "Samsung TCPM9092P" }, - { TUNER_TEMIC_4006FH5_PAL, "Temic 4006FH5" }, + { TUNER_PHILIPS_PAL_DK, "Philips FR1256 MK2" }, + { TUNER_PHILIPS_PAL, "Philips FM1216" }, + { TUNER_PHILIPS_SECAM, "Philips FM1216MF" }, + { TUNER_PHILIPS_NTSC, "Philips FM1236" }, + { TUNER_PHILIPS_PAL_I, "Philips FM1246" }, + { TUNER_PHILIPS_PAL_DK, "Philips FM1256" }, + { TUNER_TEMIC_4036FY5_NTSC, "Temic 4036FY5" }, + { TUNER_ABSENT, "Samsung TCPN9082D" }, + { TUNER_ABSENT, "Samsung TCPM9092P" }, + { TUNER_TEMIC_4006FH5_PAL, "Temic 4006FH5" }, /* 30-39 */ - { TUNER_ABSENT, "Samsung TCPN9085D" }, - { TUNER_ABSENT, "Samsung TCPB9085P" }, - { TUNER_ABSENT, "Samsung TCPL9091P" }, - { TUNER_TEMIC_4039FR5_NTSC, "Temic 4039FR5" }, - { TUNER_PHILIPS_FQ1216ME, "Philips FQ1216 ME" }, - { TUNER_TEMIC_4066FY5_PAL_I, "Temic 4066FY5" }, - { TUNER_PHILIPS_NTSC, "Philips TD1536" }, - { TUNER_PHILIPS_NTSC, "Philips TD1536D" }, - { TUNER_PHILIPS_NTSC, "Philips FMR1236" }, /* mono radio */ - { TUNER_ABSENT, "Philips FI1256MP" }, + { TUNER_ABSENT, "Samsung TCPN9085D" }, + { TUNER_ABSENT, "Samsung TCPB9085P" }, + { TUNER_ABSENT, "Samsung TCPL9091P" }, + { TUNER_TEMIC_4039FR5_NTSC, "Temic 4039FR5" }, + { TUNER_PHILIPS_FQ1216ME, "Philips FQ1216 ME" }, + { TUNER_TEMIC_4066FY5_PAL_I, "Temic 4066FY5" }, + { TUNER_PHILIPS_NTSC, "Philips TD1536" }, + { TUNER_PHILIPS_NTSC, "Philips TD1536D" }, + { TUNER_PHILIPS_NTSC, "Philips FMR1236" }, /* mono radio */ + { TUNER_ABSENT, "Philips FI1256MP" }, /* 40-49 */ - { TUNER_ABSENT, "Samsung TCPQ9091P" }, + { TUNER_ABSENT, "Samsung TCPQ9091P" }, { TUNER_TEMIC_4006FN5_MULTI_PAL, "Temic 4006FN5" }, - { TUNER_TEMIC_4009FR5_PAL, "Temic 4009FR5" }, - { TUNER_TEMIC_4046FM5, "Temic 4046FM5" }, + { TUNER_TEMIC_4009FR5_PAL, "Temic 4009FR5" }, + { TUNER_TEMIC_4046FM5, "Temic 4046FM5" }, { TUNER_TEMIC_4009FN5_MULTI_PAL_FM, "Temic 4009FN5" }, - { TUNER_ABSENT, "Philips TD1536D FH 44"}, - { TUNER_LG_NTSC_FM, "LG TP18NSR01F"}, - { TUNER_LG_PAL_FM, "LG TP18PSB01D"}, - { TUNER_LG_PAL, "LG TP18PSB11D"}, - { TUNER_LG_PAL_I_FM, "LG TAPC-I001D"}, + { TUNER_ABSENT, "Philips TD1536D FH 44"}, + { TUNER_LG_NTSC_FM, "LG TP18NSR01F"}, + { TUNER_LG_PAL_FM, "LG TP18PSB01D"}, + { TUNER_LG_PAL, "LG TP18PSB11D"}, + { TUNER_LG_PAL_I_FM, "LG TAPC-I001D"}, /* 50-59 */ - { TUNER_LG_PAL_I, "LG TAPC-I701D"}, - { TUNER_ABSENT, "Temic 4042FI5"}, - { TUNER_MICROTUNE_4049FM5, "Microtune 4049 FM5"}, - { TUNER_ABSENT, "LG TPI8NSR11F"}, - { TUNER_ABSENT, "Microtune 4049 FM5 Alt I2C"}, - { TUNER_PHILIPS_FM1216ME_MK3, "Philips FQ1216ME MK3"}, - { TUNER_ABSENT, "Philips FI1236 MK3"}, - { TUNER_PHILIPS_FM1216ME_MK3, "Philips FM1216 ME MK3"}, - { TUNER_PHILIPS_FM1236_MK3, "Philips FM1236 MK3"}, - { TUNER_ABSENT, "Philips FM1216MP MK3"}, + { TUNER_LG_PAL_I, "LG TAPC-I701D"}, + { TUNER_ABSENT, "Temic 4042FI5"}, + { TUNER_MICROTUNE_4049FM5, "Microtune 4049 FM5"}, + { TUNER_ABSENT, "LG TPI8NSR11F"}, + { TUNER_ABSENT, "Microtune 4049 FM5 Alt I2C"}, + { TUNER_PHILIPS_FM1216ME_MK3, "Philips FQ1216ME MK3"}, + { TUNER_ABSENT, "Philips FI1236 MK3"}, + { TUNER_PHILIPS_FM1216ME_MK3, "Philips FM1216 ME MK3"}, + { TUNER_PHILIPS_FM1236_MK3, "Philips FM1236 MK3"}, + { TUNER_ABSENT, "Philips FM1216MP MK3"}, /* 60-69 */ - { TUNER_PHILIPS_FM1216ME_MK3, "LG S001D MK3"}, - { TUNER_ABSENT, "LG M001D MK3"}, - { TUNER_PHILIPS_FM1216ME_MK3, "LG S701D MK3"}, - { TUNER_ABSENT, "LG M701D MK3"}, - { TUNER_ABSENT, "Temic 4146FM5"}, - { TUNER_ABSENT, "Temic 4136FY5"}, - { TUNER_ABSENT, "Temic 4106FH5"}, - { TUNER_ABSENT, "Philips FQ1216LMP MK3"}, - { TUNER_LG_NTSC_TAPE, "LG TAPE H001F MK3"}, - { TUNER_LG_NTSC_TAPE, "LG TAPE H701F MK3"}, + { TUNER_PHILIPS_FM1216ME_MK3, "LG S001D MK3"}, + { TUNER_ABSENT, "LG M001D MK3"}, + { TUNER_PHILIPS_FM1216ME_MK3, "LG S701D MK3"}, + { TUNER_ABSENT, "LG M701D MK3"}, + { TUNER_ABSENT, "Temic 4146FM5"}, + { TUNER_ABSENT, "Temic 4136FY5"}, + { TUNER_ABSENT, "Temic 4106FH5"}, + { TUNER_ABSENT, "Philips FQ1216LMP MK3"}, + { TUNER_LG_NTSC_TAPE, "LG TAPE H001F MK3"}, + { TUNER_LG_NTSC_TAPE, "LG TAPE H701F MK3"}, /* 70-79 */ - { TUNER_ABSENT, "LG TALN H200T"}, - { TUNER_ABSENT, "LG TALN H250T"}, - { TUNER_ABSENT, "LG TALN M200T"}, - { TUNER_ABSENT, "LG TALN Z200T"}, - { TUNER_ABSENT, "LG TALN S200T"}, - { TUNER_ABSENT, "Thompson DTT7595"}, - { TUNER_ABSENT, "Thompson DTT7592"}, - { TUNER_ABSENT, "Silicon TDA8275C1 8290"}, - { TUNER_ABSENT, "Silicon TDA8275C1 8290 FM"}, - { TUNER_ABSENT, "Thompson DTT757"}, + { TUNER_ABSENT, "LG TALN H200T"}, + { TUNER_ABSENT, "LG TALN H250T"}, + { TUNER_ABSENT, "LG TALN M200T"}, + { TUNER_ABSENT, "LG TALN Z200T"}, + { TUNER_ABSENT, "LG TALN S200T"}, + { TUNER_ABSENT, "Thompson DTT7595"}, + { TUNER_ABSENT, "Thompson DTT7592"}, + { TUNER_ABSENT, "Silicon TDA8275C1 8290"}, + { TUNER_ABSENT, "Silicon TDA8275C1 8290 FM"}, + { TUNER_ABSENT, "Thompson DTT757"}, /* 80-89 */ - { TUNER_PHILIPS_FM1216ME_MK3, "Philips FQ1216LME MK3"}, - { TUNER_LG_PAL_NEW_TAPC, "LG TAPC G701D"}, - { TUNER_LG_NTSC_NEW_TAPC, "LG TAPC H791F"}, - { TUNER_LG_PAL_NEW_TAPC, "TCL 2002MB 3"}, - { TUNER_LG_PAL_NEW_TAPC, "TCL 2002MI 3"}, - { TUNER_TCL_2002N, "TCL 2002N 6A"}, - { TUNER_PHILIPS_FM1236_MK3, "Philips FQ1236 MK3"}, - { TUNER_SAMSUNG_TCPN_2121P30A, "Samsung TCPN 2121P30A"}, - { TUNER_ABSENT, "Samsung TCPE 4121P30A"}, - { TUNER_PHILIPS_FM1216ME_MK3, "TCL MFPE05 2"}, + { TUNER_PHILIPS_FM1216ME_MK3, "Philips FQ1216LME MK3"}, + { TUNER_LG_PAL_NEW_TAPC, "LG TAPC G701D"}, + { TUNER_LG_NTSC_NEW_TAPC, "LG TAPC H791F"}, + { TUNER_LG_PAL_NEW_TAPC, "TCL 2002MB 3"}, + { TUNER_LG_PAL_NEW_TAPC, "TCL 2002MI 3"}, + { TUNER_TCL_2002N, "TCL 2002N 6A"}, + { TUNER_PHILIPS_FM1236_MK3, "Philips FQ1236 MK3"}, + { TUNER_SAMSUNG_TCPN_2121P30A, "Samsung TCPN 2121P30A"}, + { TUNER_ABSENT, "Samsung TCPE 4121P30A"}, + { TUNER_PHILIPS_FM1216ME_MK3, "TCL MFPE05 2"}, /* 90-99 */ - { TUNER_ABSENT, "LG TALN H202T"}, - { TUNER_PHILIPS_FQ1216AME_MK4, "Philips FQ1216AME MK4"}, - { TUNER_PHILIPS_FQ1236A_MK4, "Philips FQ1236A MK4"}, - { TUNER_ABSENT, "Philips FQ1286A MK4"}, - { TUNER_ABSENT, "Philips FQ1216ME MK5"}, - { TUNER_ABSENT, "Philips FQ1236 MK5"}, - { TUNER_SAMSUNG_TCPG_6121P30A, "Samsung TCPG 6121P30A"}, - { TUNER_TCL_2002MB, "TCL 2002MB_3H"}, - { TUNER_ABSENT, "TCL 2002MI_3H"}, - { TUNER_TCL_2002N, "TCL 2002N 5H"}, + { TUNER_ABSENT, "LG TALN H202T"}, + { TUNER_PHILIPS_FQ1216AME_MK4, "Philips FQ1216AME MK4"}, + { TUNER_PHILIPS_FQ1236A_MK4, "Philips FQ1236A MK4"}, + { TUNER_ABSENT, "Philips FQ1286A MK4"}, + { TUNER_ABSENT, "Philips FQ1216ME MK5"}, + { TUNER_ABSENT, "Philips FQ1236 MK5"}, + { TUNER_SAMSUNG_TCPG_6121P30A, "Samsung TCPG 6121P30A"}, + { TUNER_TCL_2002MB, "TCL 2002MB_3H"}, + { TUNER_ABSENT, "TCL 2002MI_3H"}, + { TUNER_TCL_2002N, "TCL 2002N 5H"}, /* 100-109 */ - { TUNER_PHILIPS_FMD1216ME_MK3, "Philips FMD1216ME"}, - { TUNER_TEA5767, "Philips TEA5768HL FM Radio"}, - { TUNER_ABSENT, "Panasonic ENV57H12D5"}, - { TUNER_PHILIPS_FM1236_MK3, "TCL MFNM05-4"}, - { TUNER_ABSENT, "TCL MNM05-4"}, - { TUNER_PHILIPS_FM1216ME_MK3, "TCL MPE05-2"}, - { TUNER_ABSENT, "TCL MQNM05-4"}, - { TUNER_ABSENT, "LG TAPC-W701D"}, - { TUNER_ABSENT, "TCL 9886P-WM"}, - { TUNER_ABSENT, "TCL 1676NM-WM"}, + { TUNER_PHILIPS_FMD1216ME_MK3, "Philips FMD1216ME"}, + { TUNER_TEA5767, "Philips TEA5768HL FM Radio"}, + { TUNER_ABSENT, "Panasonic ENV57H12D5"}, + { TUNER_PHILIPS_FM1236_MK3, "TCL MFNM05-4"}, + { TUNER_ABSENT, "TCL MNM05-4"}, + { TUNER_PHILIPS_FM1216ME_MK3, "TCL MPE05-2"}, + { TUNER_ABSENT, "TCL MQNM05-4"}, + { TUNER_ABSENT, "LG TAPC-W701D"}, + { TUNER_ABSENT, "TCL 9886P-WM"}, + { TUNER_ABSENT, "TCL 1676NM-WM"}, /* 110-119 */ - { TUNER_ABSENT, "Thompson DTT75105"}, - { TUNER_ABSENT, "Conexant_CX24109"}, - { TUNER_TCL_2002N, "TCL M2523_5N_E"}, - { TUNER_TCL_2002MB, "TCL M2523_3DB_E"}, - { TUNER_ABSENT, "Philips 8275A"}, - { TUNER_ABSENT, "Microtune MT2060"}, - { TUNER_PHILIPS_FM1236_MK3, "Philips FM1236 MK5"}, - { TUNER_PHILIPS_FM1216ME_MK3, "Philips FM1216ME MK5"}, - { TUNER_ABSENT, "TCL M2523_3DI_E"}, - { TUNER_ABSENT, "Samsung THPD5222FG30A"}, + { TUNER_ABSENT, "Thompson DTT75105"}, + { TUNER_ABSENT, "Conexant_CX24109"}, + { TUNER_TCL_2002N, "TCL M2523_5N_E"}, + { TUNER_TCL_2002MB, "TCL M2523_3DB_E"}, + { TUNER_ABSENT, "Philips 8275A"}, + { TUNER_ABSENT, "Microtune MT2060"}, + { TUNER_PHILIPS_FM1236_MK3, "Philips FM1236 MK5"}, + { TUNER_PHILIPS_FM1216ME_MK3, "Philips FM1216ME MK5"}, + { TUNER_ABSENT, "TCL M2523_3DI_E"}, + { TUNER_ABSENT, "Samsung THPD5222FG30A"}, /* 120-129 */ - { TUNER_XC2028, "Xceive XC3028"}, - { TUNER_ABSENT, "Philips FQ1216LME MK5"}, - { TUNER_ABSENT, "Philips FQD1216LME"}, - { TUNER_ABSENT, "Conexant CX24118A"}, - { TUNER_ABSENT, "TCL DMF11WIP"}, - { TUNER_ABSENT, "TCL MFNM05_4H_E"}, - { TUNER_ABSENT, "TCL MNM05_4H_E"}, - { TUNER_ABSENT, "TCL MPE05_2H_E"}, - { TUNER_ABSENT, "TCL MQNM05_4_U"}, - { TUNER_ABSENT, "TCL M2523_5NH_E"}, + { TUNER_XC2028, "Xceive XC3028"}, + { TUNER_ABSENT, "Philips FQ1216LME MK5"}, + { TUNER_ABSENT, "Philips FQD1216LME"}, + { TUNER_ABSENT, "Conexant CX24118A"}, + { TUNER_ABSENT, "TCL DMF11WIP"}, + { TUNER_ABSENT, "TCL MFNM05_4H_E"}, + { TUNER_ABSENT, "TCL MNM05_4H_E"}, + { TUNER_ABSENT, "TCL MPE05_2H_E"}, + { TUNER_ABSENT, "TCL MQNM05_4_U"}, + { TUNER_ABSENT, "TCL M2523_5NH_E"}, /* 130-139 */ - { TUNER_ABSENT, "TCL M2523_3DBH_E"}, - { TUNER_ABSENT, "TCL M2523_3DIH_E"}, - { TUNER_ABSENT, "TCL MFPE05_2_U"}, - { TUNER_ABSENT, "Philips FMD1216MEX"}, - { TUNER_ABSENT, "Philips FRH2036B"}, - { TUNER_ABSENT, "Panasonic ENGF75_01GF"}, - { TUNER_ABSENT, "MaxLinear MXL5005"}, - { TUNER_ABSENT, "MaxLinear MXL5003"}, - { TUNER_ABSENT, "Xceive XC2028"}, - { TUNER_ABSENT, "Microtune MT2131"}, + { TUNER_ABSENT, "TCL M2523_3DBH_E"}, + { TUNER_ABSENT, "TCL M2523_3DIH_E"}, + { TUNER_ABSENT, "TCL MFPE05_2_U"}, + { TUNER_ABSENT, "Philips FMD1216MEX"}, + { TUNER_ABSENT, "Philips FRH2036B"}, + { TUNER_ABSENT, "Panasonic ENGF75_01GF"}, + { TUNER_ABSENT, "MaxLinear MXL5005"}, + { TUNER_ABSENT, "MaxLinear MXL5003"}, + { TUNER_ABSENT, "Xceive XC2028"}, + { TUNER_ABSENT, "Microtune MT2131"}, /* 140-149 */ - { TUNER_ABSENT, "Philips 8275A_8295"}, - { TUNER_ABSENT, "TCL MF02GIP_5N_E"}, - { TUNER_ABSENT, "TCL MF02GIP_3DB_E"}, - { TUNER_ABSENT, "TCL MF02GIP_3DI_E"}, - { TUNER_ABSENT, "Microtune MT2266"}, - { TUNER_ABSENT, "TCL MF10WPP_4N_E"}, - { TUNER_ABSENT, "LG TAPQ_H702F"}, - { TUNER_ABSENT, "TCL M09WPP_4N_E"}, - { TUNER_ABSENT, "MaxLinear MXL5005_v2"}, - { TUNER_PHILIPS_TDA8290, "Philips 18271_8295"}, + { TUNER_ABSENT, "Philips 8275A_8295"}, + { TUNER_ABSENT, "TCL MF02GIP_5N_E"}, + { TUNER_ABSENT, "TCL MF02GIP_3DB_E"}, + { TUNER_ABSENT, "TCL MF02GIP_3DI_E"}, + { TUNER_ABSENT, "Microtune MT2266"}, + { TUNER_ABSENT, "TCL MF10WPP_4N_E"}, + { TUNER_ABSENT, "LG TAPQ_H702F"}, + { TUNER_ABSENT, "TCL M09WPP_4N_E"}, + { TUNER_ABSENT, "MaxLinear MXL5005_v2"}, + { TUNER_PHILIPS_TDA8290, "Philips 18271_8295"}, }; static struct HAUPPAUGE_AUDIOIC @@ -344,37 +346,37 @@ static const char *decoderIC[] = { static int hasRadioTuner(int tunerType) { switch (tunerType) { - case 18: //PNPEnv_TUNER_FR1236_MK2: - case 23: //PNPEnv_TUNER_FM1236: - case 38: //PNPEnv_TUNER_FMR1236: - case 16: //PNPEnv_TUNER_FR1216_MK2: - case 19: //PNPEnv_TUNER_FR1246_MK2: - case 21: //PNPEnv_TUNER_FM1216: - case 24: //PNPEnv_TUNER_FM1246: - case 17: //PNPEnv_TUNER_FR1216MF_MK2: - case 22: //PNPEnv_TUNER_FM1216MF: - case 20: //PNPEnv_TUNER_FR1256_MK2: - case 25: //PNPEnv_TUNER_FM1256: - case 33: //PNPEnv_TUNER_4039FR5: - case 42: //PNPEnv_TUNER_4009FR5: - case 52: //PNPEnv_TUNER_4049FM5: - case 54: //PNPEnv_TUNER_4049FM5_AltI2C: - case 44: //PNPEnv_TUNER_4009FN5: - case 31: //PNPEnv_TUNER_TCPB9085P: - case 30: //PNPEnv_TUNER_TCPN9085D: - case 46: //PNPEnv_TUNER_TP18NSR01F: - case 47: //PNPEnv_TUNER_TP18PSB01D: - case 49: //PNPEnv_TUNER_TAPC_I001D: - case 60: //PNPEnv_TUNER_TAPE_S001D_MK3: - case 57: //PNPEnv_TUNER_FM1216ME_MK3: - case 59: //PNPEnv_TUNER_FM1216MP_MK3: - case 58: //PNPEnv_TUNER_FM1236_MK3: - case 68: //PNPEnv_TUNER_TAPE_H001F_MK3: - case 61: //PNPEnv_TUNER_TAPE_M001D_MK3: - case 78: //PNPEnv_TUNER_TDA8275C1_8290_FM: - case 89: //PNPEnv_TUNER_TCL_MFPE05_2: - case 92: //PNPEnv_TUNER_PHILIPS_FQ1236A_MK4: - case 105: + case 18: /* PNPEnv_TUNER_FR1236_MK2 */ + case 23: /* PNPEnv_TUNER_FM1236 */ + case 38: /* PNPEnv_TUNER_FMR1236 */ + case 16: /* PNPEnv_TUNER_FR1216_MK2 */ + case 19: /* PNPEnv_TUNER_FR1246_MK2 */ + case 21: /* PNPEnv_TUNER_FM1216 */ + case 24: /* PNPEnv_TUNER_FM1246 */ + case 17: /* PNPEnv_TUNER_FR1216MF_MK2 */ + case 22: /* PNPEnv_TUNER_FM1216MF */ + case 20: /* PNPEnv_TUNER_FR1256_MK2 */ + case 25: /* PNPEnv_TUNER_FM1256 */ + case 33: /* PNPEnv_TUNER_4039FR5 */ + case 42: /* PNPEnv_TUNER_4009FR5 */ + case 52: /* PNPEnv_TUNER_4049FM5 */ + case 54: /* PNPEnv_TUNER_4049FM5_AltI2C */ + case 44: /* PNPEnv_TUNER_4009FN5 */ + case 31: /* PNPEnv_TUNER_TCPB9085P */ + case 30: /* PNPEnv_TUNER_TCPN9085D */ + case 46: /* PNPEnv_TUNER_TP18NSR01F */ + case 47: /* PNPEnv_TUNER_TP18PSB01D */ + case 49: /* PNPEnv_TUNER_TAPC_I001D */ + case 60: /* PNPEnv_TUNER_TAPE_S001D_MK3 */ + case 57: /* PNPEnv_TUNER_FM1216ME_MK3 */ + case 59: /* PNPEnv_TUNER_FM1216MP_MK3 */ + case 58: /* PNPEnv_TUNER_FM1236_MK3 */ + case 68: /* PNPEnv_TUNER_TAPE_H001F_MK3 */ + case 61: /* PNPEnv_TUNER_TAPE_M001D_MK3 */ + case 78: /* PNPEnv_TUNER_TDA8275C1_8290_FM */ + case 89: /* PNPEnv_TUNER_TCL_MFPE05_2 */ + case 92: /* PNPEnv_TUNER_PHILIPS_FQ1236A_MK4 */ + case 105: return 1; } return 0; @@ -392,7 +394,8 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, ** ** In our (ivtv) case we're interested in the following: ** tuner type: tag [00].05 or [0a].01 (index into hauppauge_tuner) - ** tuner fmts: tag [00].04 or [0a].00 (bitmask index into hauppauge_tuner_fmt) + ** tuner fmts: tag [00].04 or [0a].00 (bitmask index into + ** hauppauge_tuner_fmt) ** radio: tag [00].{last} or [0e].00 (bitmask. bit2=FM) ** audio proc: tag [02].01 or [05].00 (mask with 0x7f) ** decoder proc: tag [09].01) @@ -451,16 +454,17 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, ++i; } else { tveeprom_warn("Encountered bad packet header [%02x]. " - "Corrupt or not a Hauppauge eeprom.\n", eeprom_data[i]); + "Corrupt or not a Hauppauge eeprom.\n", + eeprom_data[i]); return; } if (debug) { - tveeprom_info("Tag [%02x] + %d bytes:", eeprom_data[i], len - 1); - for(j = 1; j < len; j++) { - printk(" %02x", eeprom_data[i + j]); - } - printk("\n"); + tveeprom_info("Tag [%02x] + %d bytes:", + eeprom_data[i], len - 1); + for (j = 1; j < len; j++) + printk(KERN_CONT " %02x", eeprom_data[i + j]); + printk(KERN_CONT "\n"); } /* process by tag */ @@ -511,16 +515,16 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, (eeprom_data[i+6] << 8) + (eeprom_data[i+7] << 16); - if ( (eeprom_data[i + 8] & 0xf0) && - (tvee->serial_number < 0xffffff) ) { - tvee->MAC_address[0] = 0x00; - tvee->MAC_address[1] = 0x0D; - tvee->MAC_address[2] = 0xFE; - tvee->MAC_address[3] = eeprom_data[i + 7]; - tvee->MAC_address[4] = eeprom_data[i + 6]; - tvee->MAC_address[5] = eeprom_data[i + 5]; - tvee->has_MAC_address = 1; - } + if ((eeprom_data[i + 8] & 0xf0) && + (tvee->serial_number < 0xffffff)) { + tvee->MAC_address[0] = 0x00; + tvee->MAC_address[1] = 0x0D; + tvee->MAC_address[2] = 0xFE; + tvee->MAC_address[3] = eeprom_data[i + 7]; + tvee->MAC_address[4] = eeprom_data[i + 6]; + tvee->MAC_address[5] = eeprom_data[i + 5]; + tvee->has_MAC_address = 1; + } break; case 0x05: @@ -544,7 +548,7 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, (eeprom_data[i + 3] << 16) + (eeprom_data[i + 4] << 24); tvee->revision = - eeprom_data[i +5 ] + + eeprom_data[i + 5] + (eeprom_data[i + 6] << 8) + (eeprom_data[i + 7] << 16); break; @@ -564,16 +568,16 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, case 0x0a: /* tag 'Tuner' */ if (beenhere == 0) { - tuner1 = eeprom_data[i+2]; - t_format1 = eeprom_data[i+1]; + tuner1 = eeprom_data[i + 2]; + t_format1 = eeprom_data[i + 1]; beenhere = 1; } else { /* a second (radio) tuner may be present */ - tuner2 = eeprom_data[i+2]; - t_format2 = eeprom_data[i+1]; - if (t_format2 == 0) { /* not a TV tuner? */ + tuner2 = eeprom_data[i + 2]; + t_format2 = eeprom_data[i + 1]; + /* not a TV tuner? */ + if (t_format2 == 0) tvee->has_radio = 1; /* must be radio */ - } } break; @@ -601,7 +605,8 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, /* case 0x12: tag 'InfoBits' */ default: - tveeprom_dbg("Not sure what to do with tag [%02x]\n", tag); + tveeprom_dbg("Not sure what to do with tag [%02x]\n", + tag); /* dump the rest of the packet? */ } } @@ -615,7 +620,7 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, tvee->rev_str[0] = 32 + ((tvee->revision >> 18) & 0x3f); tvee->rev_str[1] = 32 + ((tvee->revision >> 12) & 0x3f); tvee->rev_str[2] = 32 + ((tvee->revision >> 6) & 0x3f); - tvee->rev_str[3] = 32 + ( tvee->revision & 0x3f); + tvee->rev_str[3] = 32 + (tvee->revision & 0x3f); tvee->rev_str[4] = 0; } @@ -658,44 +663,40 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, tveeprom_info("Hauppauge model %d, rev %s, serial# %d\n", tvee->model, tvee->rev_str, tvee->serial_number); - if (tvee->has_MAC_address == 1) { + if (tvee->has_MAC_address == 1) tveeprom_info("MAC address is %02X-%02X-%02X-%02X-%02X-%02X\n", tvee->MAC_address[0], tvee->MAC_address[1], tvee->MAC_address[2], tvee->MAC_address[3], tvee->MAC_address[4], tvee->MAC_address[5]); - } tveeprom_info("tuner model is %s (idx %d, type %d)\n", t_name1, tuner1, tvee->tuner_type); tveeprom_info("TV standards%s%s%s%s%s%s%s%s (eeprom 0x%02x)\n", - t_fmt_name1[0], t_fmt_name1[1], t_fmt_name1[2], t_fmt_name1[3], - t_fmt_name1[4], t_fmt_name1[5], t_fmt_name1[6], t_fmt_name1[7], - t_format1); - if (tuner2) { + t_fmt_name1[0], t_fmt_name1[1], t_fmt_name1[2], + t_fmt_name1[3], t_fmt_name1[4], t_fmt_name1[5], + t_fmt_name1[6], t_fmt_name1[7], t_format1); + if (tuner2) tveeprom_info("second tuner model is %s (idx %d, type %d)\n", t_name2, tuner2, tvee->tuner2_type); - } - if (t_format2) { + if (t_format2) tveeprom_info("TV standards%s%s%s%s%s%s%s%s (eeprom 0x%02x)\n", - t_fmt_name2[0], t_fmt_name2[1], t_fmt_name2[2], t_fmt_name2[3], - t_fmt_name2[4], t_fmt_name2[5], t_fmt_name2[6], t_fmt_name2[7], - t_format2); - } - if (audioic<0) { + t_fmt_name2[0], t_fmt_name2[1], t_fmt_name2[2], + t_fmt_name2[3], t_fmt_name2[4], t_fmt_name2[5], + t_fmt_name2[6], t_fmt_name2[7], t_format2); + if (audioic < 0) { tveeprom_info("audio processor is unknown (no idx)\n"); - tvee->audio_processor=AUDIO_CHIP_UNKNOWN; + tvee->audio_processor = AUDIO_CHIP_UNKNOWN; } else { if (audioic < ARRAY_SIZE(audioIC)) tveeprom_info("audio processor is %s (idx %d)\n", - audioIC[audioic].name,audioic); + audioIC[audioic].name, audioic); else tveeprom_info("audio processor is unknown (idx %d)\n", audioic); } - if (tvee->decoder_processor) { + if (tvee->decoder_processor) tveeprom_info("decoder processor is %s (idx %d)\n", STRM(decoderIC, tvee->decoder_processor), tvee->decoder_processor); - } if (tvee->has_ir == -1) tveeprom_info("has %sradio\n", tvee->has_radio ? "" : "no "); @@ -716,11 +717,13 @@ int tveeprom_read(struct i2c_client *c, unsigned char *eedata, int len) int err; buf = 0; - if (1 != (err = i2c_master_send(c, &buf, 1))) { + err = i2c_master_send(c, &buf, 1); + if (err != 1) { tveeprom_info("Huh, no eeprom present (err=%d)?\n", err); return -1; } - if (len != (err = i2c_master_recv(c, eedata, len))) { + err = i2c_master_recv(c, eedata, len); + if (err != len) { tveeprom_warn("i2c eeprom read error (err=%d)\n", err); return -1; } @@ -731,9 +734,9 @@ int tveeprom_read(struct i2c_client *c, unsigned char *eedata, int len) for (i = 0; i < len; i++) { if (0 == (i % 16)) tveeprom_info("%02x:", i); - printk(" %02x", eedata[i]); + printk(KERN_CONT " %02x", eedata[i]); if (15 == (i % 16)) - printk("\n"); + printk(KERN_CONT "\n"); } } return 0; @@ -765,9 +768,9 @@ tveeprom_command(struct i2c_client *client, switch (cmd) { case 0: - buf = kzalloc(256,GFP_KERNEL); - tveeprom_read(client,buf,256); - tveeprom_hauppauge_analog(client, &eeprom,buf); + buf = kzalloc(256, GFP_KERNEL); + tveeprom_read(client, buf, 256); + tveeprom_hauppauge_analog(client, &eeprom, buf); kfree(buf); eeprom_props[0] = eeprom.tuner_type; eeprom_props[1] = eeprom.tuner_formats; @@ -801,7 +804,7 @@ tveeprom_detect_client(struct i2c_adapter *adapter, } static int -tveeprom_attach_adapter (struct i2c_adapter *adapter) +tveeprom_attach_adapter(struct i2c_adapter *adapter) { if (adapter->class & I2C_CLASS_TV_ANALOG) return i2c_probe(adapter, &addr_data, tveeprom_detect_client); @@ -809,7 +812,7 @@ tveeprom_attach_adapter (struct i2c_adapter *adapter) } static int -tveeprom_detach_client (struct i2c_client *client) +tveeprom_detach_client(struct i2c_client *client) { int err; -- cgit v1.2.3-59-g8ed1b From ea48c13ad0e5626b827bd7076c22df1a352e3983 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 12 Dec 2007 07:04:58 -0300 Subject: V4L/DVB (6861): cx2341x: command argument should be u32 instead of int Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx2341x.c | 2 +- drivers/media/video/cx88/cx88-blackbird.c | 2 +- drivers/media/video/ivtv/ivtv-mailbox.c | 2 +- drivers/media/video/ivtv/ivtv-mailbox.h | 2 +- drivers/media/video/pvrusb2/pvrusb2-encoder.c | 2 +- include/media/cx2341x.h | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/media/video/cx2341x.c b/drivers/media/video/cx2341x.c index 890c8867af1c..c592899a2317 100644 --- a/drivers/media/video/cx2341x.c +++ b/drivers/media/video/cx2341x.c @@ -775,7 +775,7 @@ void cx2341x_fill_defaults(struct cx2341x_mpeg_params *p) EXPORT_SYMBOL(cx2341x_fill_defaults); static int cx2341x_api(void *priv, cx2341x_mbox_func func, - int cmd, int args, ...) + u32 cmd, int args, ...) { u32 data[CX2341X_MBOX_MAX_DATA]; va_list vargs; diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index 5f79442924fd..a99e9d5950aa 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -307,7 +307,7 @@ static int register_read(struct cx88_core *core, u32 address, u32 *value) /* ------------------------------------------------------------------ */ -static int blackbird_mbox_func(void *priv, int command, int in, int out, u32 data[CX2341X_MBOX_MAX_DATA]) +static int blackbird_mbox_func(void *priv, u32 command, int in, int out, u32 data[CX2341X_MBOX_MAX_DATA]) { struct cx8802_dev *dev = priv; unsigned long timeout; diff --git a/drivers/media/video/ivtv/ivtv-mailbox.c b/drivers/media/video/ivtv/ivtv-mailbox.c index b05436da7136..13a6c374d2db 100644 --- a/drivers/media/video/ivtv/ivtv-mailbox.c +++ b/drivers/media/video/ivtv/ivtv-mailbox.c @@ -333,7 +333,7 @@ int ivtv_api(struct ivtv *itv, int cmd, int args, u32 data[]) return (res == -EBUSY) ? ivtv_api_call(itv, cmd, args, data) : res; } -int ivtv_api_func(void *priv, int cmd, int in, int out, u32 data[CX2341X_MBOX_MAX_DATA]) +int ivtv_api_func(void *priv, u32 cmd, int in, int out, u32 data[CX2341X_MBOX_MAX_DATA]) { return ivtv_api(priv, cmd, in, data); } diff --git a/drivers/media/video/ivtv/ivtv-mailbox.h b/drivers/media/video/ivtv/ivtv-mailbox.h index 71a54eef8fc7..6ef12091e3f3 100644 --- a/drivers/media/video/ivtv/ivtv-mailbox.h +++ b/drivers/media/video/ivtv/ivtv-mailbox.h @@ -28,6 +28,6 @@ void ivtv_api_get_data(struct ivtv_mailbox_data *mbox, int mb, u32 data[]); int ivtv_api(struct ivtv *itv, int cmd, int args, u32 data[]); int ivtv_vapi_result(struct ivtv *itv, u32 data[CX2341X_MBOX_MAX_DATA], int cmd, int args, ...); int ivtv_vapi(struct ivtv *itv, int cmd, int args, ...); -int ivtv_api_func(void *priv, int cmd, int in, int out, u32 data[CX2341X_MBOX_MAX_DATA]); +int ivtv_api_func(void *priv, u32 cmd, int in, int out, u32 data[CX2341X_MBOX_MAX_DATA]); #endif diff --git a/drivers/media/video/pvrusb2/pvrusb2-encoder.c b/drivers/media/video/pvrusb2/pvrusb2-encoder.c index 52b39954f990..64062879981e 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-encoder.c +++ b/drivers/media/video/pvrusb2/pvrusb2-encoder.c @@ -140,7 +140,7 @@ static int pvr2_encoder_read_words(struct pvr2_hdw *hdw, cx2341x.ko to write to our encoder (by handing it a pointer to this function). For earlier kernels this doesn't really matter. */ static int pvr2_encoder_cmd(void *ctxt, - int cmd, + u32 cmd, int arg_cnt_send, int arg_cnt_recv, u32 *argp) diff --git a/include/media/cx2341x.h b/include/media/cx2341x.h index af8071d7620d..5f4608e88476 100644 --- a/include/media/cx2341x.h +++ b/include/media/cx2341x.h @@ -83,7 +83,7 @@ struct cx2341x_mpeg_params { #define CX2341X_MBOX_MAX_DATA 16 extern const u32 cx2341x_mpeg_ctrls[]; -typedef int (*cx2341x_mbox_func)(void *priv, int cmd, int in, int out, +typedef int (*cx2341x_mbox_func)(void *priv, u32 cmd, int in, int out, u32 data[CX2341X_MBOX_MAX_DATA]); int cx2341x_update(void *priv, cx2341x_mbox_func func, const struct cx2341x_mpeg_params *old, -- cgit v1.2.3-59-g8ed1b From f69d419a0bdf4cd2551200b6777a226fea527d1a Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 12 Dec 2007 07:24:27 -0300 Subject: V4L/DVB (6862): ivtv: really remove i2c legacy support from drivers that no longer need it For some reason the include header wasn't changed from v4l2-i2c-drv-legacy.h to v4l2-i2c-drv.h in the previous patch. This is now corrected. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/m52790.c | 2 +- drivers/media/video/saa7127.c | 2 +- drivers/media/video/upd64031a.c | 2 +- drivers/media/video/upd64083.c | 2 +- drivers/media/video/vp27smpx.c | 2 +- drivers/media/video/wm8739.c | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/media/video/m52790.c b/drivers/media/video/m52790.c index 4d2a52204ad4..d4bf14c284ef 100644 --- a/drivers/media/video/m52790.c +++ b/drivers/media/video/m52790.c @@ -30,7 +30,7 @@ #include #include #include -#include +#include MODULE_DESCRIPTION("i2c device driver for m52790 A/V switch"); MODULE_AUTHOR("Hans Verkuil"); diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c index a5fbfe025333..b146eedfc7a6 100644 --- a/drivers/media/video/saa7127.c +++ b/drivers/media/video/saa7127.c @@ -55,7 +55,7 @@ #include #include #include -#include +#include #include static int debug = 0; diff --git a/drivers/media/video/upd64031a.c b/drivers/media/video/upd64031a.c index 1b162f2dca95..bc8db9943b77 100644 --- a/drivers/media/video/upd64031a.c +++ b/drivers/media/video/upd64031a.c @@ -28,7 +28,7 @@ #include #include #include -#include +#include #include // --------------------- read registers functions define ----------------------- diff --git a/drivers/media/video/upd64083.c b/drivers/media/video/upd64083.c index 0f9e86cfc628..d467cc34ac4d 100644 --- a/drivers/media/video/upd64083.c +++ b/drivers/media/video/upd64083.c @@ -27,7 +27,7 @@ #include #include #include -#include +#include #include MODULE_DESCRIPTION("uPD64083 driver"); diff --git a/drivers/media/video/vp27smpx.c b/drivers/media/video/vp27smpx.c index cd98084ac090..2d97914d3092 100644 --- a/drivers/media/video/vp27smpx.c +++ b/drivers/media/video/vp27smpx.c @@ -30,7 +30,7 @@ #include #include #include -#include +#include MODULE_DESCRIPTION("vp27smpx driver"); MODULE_AUTHOR("Hans Verkuil"); diff --git a/drivers/media/video/wm8739.c b/drivers/media/video/wm8739.c index 1c30a5c8455c..31795b4f8b63 100644 --- a/drivers/media/video/wm8739.c +++ b/drivers/media/video/wm8739.c @@ -30,7 +30,7 @@ #include #include #include -#include +#include MODULE_DESCRIPTION("wm8739 driver"); MODULE_AUTHOR("T. Adachi, Hans Verkuil"); -- cgit v1.2.3-59-g8ed1b From 8c9fc8de546134d021de58c7ade6f025c9d1da1c Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 12 Dec 2007 07:30:02 -0300 Subject: V4L/DVB (6863): upd64083: CodingStyle cleanups Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/upd64083.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-) diff --git a/drivers/media/video/upd64083.c b/drivers/media/video/upd64083.c index d467cc34ac4d..2d9a88f70c85 100644 --- a/drivers/media/video/upd64083.c +++ b/drivers/media/video/upd64083.c @@ -17,7 +17,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. */ #include @@ -34,7 +35,7 @@ MODULE_DESCRIPTION("uPD64083 driver"); MODULE_AUTHOR("T. Adachi, Takeru KOMORIYA, Hans Verkuil"); MODULE_LICENSE("GPL"); -static int debug = 0; +static int debug; module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "Debug level (0-1)"); @@ -85,7 +86,7 @@ static void upd64083_write(struct i2c_client *client, u8 reg, u8 val) buf[0] = reg; buf[1] = val; - v4l_dbg(1, debug, client, "writing reg addr: %02x val: %02x\n", reg, val); + v4l_dbg(1, debug, client, "write reg: %02x val: %02x\n", reg, val); if (i2c_master_send(client, buf, 2) != 2) v4l_err(client, "I/O error write 0x%02x/0x%02x\n", reg, val); } @@ -106,7 +107,7 @@ static u8 upd64083_read(struct i2c_client *client, u8 reg) /* ------------------------------------------------------------------------ */ -static int upd64083_command(struct i2c_client *client, unsigned int cmd, void *arg) +static int upd64083_command(struct i2c_client *client, unsigned cmd, void *arg) { struct upd64083_state *state = i2c_get_clientdata(client); struct v4l2_routing *route = arg; @@ -142,20 +143,23 @@ static int upd64083_command(struct i2c_client *client, unsigned int cmd, void *a { struct v4l2_register *reg = arg; - if (!v4l2_chip_match_i2c_client(client, reg->match_type, reg->match_chip)) + if (!v4l2_chip_match_i2c_client(client, + reg->match_type, reg->match_chip)) return -EINVAL; if (!capable(CAP_SYS_ADMIN)) return -EPERM; - if (cmd == VIDIOC_DBG_G_REGISTER) + if (cmd == VIDIOC_DBG_G_REGISTER) { reg->val = upd64083_read(client, reg->reg & 0xff); - else - upd64083_write(client, reg->reg & 0xff, reg->val & 0xff); + break; + } + upd64083_write(client, reg->reg & 0xff, reg->val & 0xff); break; } #endif case VIDIOC_G_CHIP_IDENT: - return v4l2_chip_ident_i2c_client(client, arg, V4L2_IDENT_UPD64083, 0); + return v4l2_chip_ident_i2c_client(client, arg, + V4L2_IDENT_UPD64083, 0); default: break; @@ -176,20 +180,19 @@ static int upd64083_probe(struct i2c_client *client) if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -EIO; - v4l_info(client, "chip found @ 0x%x (%s)\n", client->addr << 1, client->adapter->name); + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); state = kmalloc(sizeof(struct upd64083_state), GFP_KERNEL); - if (state == NULL) { + if (state == NULL) return -ENOMEM; - } i2c_set_clientdata(client, state); /* Initially assume that a ghost reduction chip is present */ state->mode = 0; /* YCS mode */ state->ext_y_adc = (1 << 5); memcpy(state->regs, upd64083_init, TOT_REGS); - for (i = 0; i < TOT_REGS; i++) { + for (i = 0; i < TOT_REGS; i++) upd64083_write(client, i, state->regs[i]); - } return 0; } -- cgit v1.2.3-59-g8ed1b From 79f998a71b9bca5a16b0b8c30e5c0c849705a5ec Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 12 Dec 2007 07:34:15 -0300 Subject: V4L/DVB (6864): upd64031a: CodingStyle cleanup Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/upd64031a.c | 38 +++++++++++++++++++++----------------- 1 file changed, 21 insertions(+), 17 deletions(-) diff --git a/drivers/media/video/upd64031a.c b/drivers/media/video/upd64031a.c index bc8db9943b77..bd201397a2ac 100644 --- a/drivers/media/video/upd64031a.c +++ b/drivers/media/video/upd64031a.c @@ -31,20 +31,20 @@ #include #include -// --------------------- read registers functions define ----------------------- +/* --------------------- read registers functions define -------------------- */ /* bit masks */ #define GR_MODE_MASK 0xc0 #define DIRECT_3DYCS_CONNECT_MASK 0xc0 #define SYNC_CIRCUIT_MASK 0xa0 -// ----------------------------------------------------------------------------- +/* -------------------------------------------------------------------------- */ MODULE_DESCRIPTION("uPD64031A driver"); MODULE_AUTHOR("T. Adachi, Takeru KOMORIYA, Hans Verkuil"); MODULE_LICENSE("GPL"); -static int debug = 0; +static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Debug level (0-1)"); @@ -96,7 +96,7 @@ static void upd64031a_write(struct i2c_client *client, u8 reg, u8 val) buf[0] = reg; buf[1] = val; - v4l_dbg(1, debug, client, "writing reg addr: %02X val: %02X\n", reg, val); + v4l_dbg(1, debug, client, "write reg: %02X val: %02X\n", reg, val); if (i2c_master_send(client, buf, 2) != 2) v4l_err(client, "I/O error write 0x%02x/0x%02x\n", reg, val); } @@ -116,7 +116,7 @@ static void upd64031a_change(struct i2c_client *client) /* ------------------------------------------------------------------------ */ -static int upd64031a_command(struct i2c_client *client, unsigned int cmd, void *arg) +static int upd64031a_command(struct i2c_client *client, unsigned cmd, void *arg) { struct upd64031a_state *state = i2c_get_clientdata(client); struct v4l2_routing *route = arg; @@ -140,8 +140,10 @@ static int upd64031a_command(struct i2c_client *client, unsigned int cmd, void * state->gr_mode = (route->input & 3) << 6; state->direct_3dycs_connect = (route->input & 0xc) << 4; - state->ext_comp_sync = (route->input & UPD64031A_COMPOSITE_EXTERNAL) << 1; - state->ext_vert_sync = (route->input & UPD64031A_VERTICAL_EXTERNAL) << 2; + state->ext_comp_sync = + (route->input & UPD64031A_COMPOSITE_EXTERNAL) << 1; + state->ext_vert_sync = + (route->input & UPD64031A_VERTICAL_EXTERNAL) << 2; r00 = (state->regs[R00] & ~GR_MODE_MASK) | state->gr_mode; r05 = (state->regs[R00] & ~SYNC_CIRCUIT_MASK) | state->ext_comp_sync | state->ext_vert_sync; @@ -165,20 +167,23 @@ static int upd64031a_command(struct i2c_client *client, unsigned int cmd, void * { struct v4l2_register *reg = arg; - if (!v4l2_chip_match_i2c_client(client, reg->match_type, reg->match_chip)) + if (!v4l2_chip_match_i2c_client(client, + reg->match_type, reg->match_chip)) return -EINVAL; if (!capable(CAP_SYS_ADMIN)) return -EPERM; - if (cmd == VIDIOC_DBG_G_REGISTER) + if (cmd == VIDIOC_DBG_G_REGISTER) { reg->val = upd64031a_read(client, reg->reg & 0xff); - else - upd64031a_write(client, reg->reg & 0xff, reg->val & 0xff); + break; + } + upd64031a_write(client, reg->reg & 0xff, reg->val & 0xff); break; } #endif case VIDIOC_G_CHIP_IDENT: - return v4l2_chip_ident_i2c_client(client, arg, V4L2_IDENT_UPD64031A, 0); + return v4l2_chip_ident_i2c_client(client, arg, + V4L2_IDENT_UPD64031A, 0); default: break; @@ -198,20 +203,19 @@ static int upd64031a_probe(struct i2c_client *client) if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -EIO; - v4l_info(client, "chip found @ 0x%x (%s)\n", client->addr << 1, client->adapter->name); + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); state = kmalloc(sizeof(struct upd64031a_state), GFP_KERNEL); - if (state == NULL) { + if (state == NULL) return -ENOMEM; - } i2c_set_clientdata(client, state); memcpy(state->regs, upd64031a_init, sizeof(state->regs)); state->gr_mode = UPD64031A_GR_ON << 6; state->direct_3dycs_connect = UPD64031A_3DYCS_COMPOSITE << 4; state->ext_comp_sync = state->ext_vert_sync = 0; - for (i = 0; i < TOT_REGS; i++) { + for (i = 0; i < TOT_REGS; i++) upd64031a_write(client, i, state->regs[i]); - } return 0; } -- cgit v1.2.3-59-g8ed1b From 35df38c015866b3c28bfb1914b14eba92086cdd1 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 12 Dec 2007 07:40:54 -0300 Subject: V4L/DVB (6865): vp27smpx: CodingStyle cleanup Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/vp27smpx.c | 40 ++++++++++++++++++++-------------------- 1 file changed, 20 insertions(+), 20 deletions(-) diff --git a/drivers/media/video/vp27smpx.c b/drivers/media/video/vp27smpx.c index 2d97914d3092..282c81403c97 100644 --- a/drivers/media/video/vp27smpx.c +++ b/drivers/media/video/vp27smpx.c @@ -50,27 +50,26 @@ static void vp27smpx_set_audmode(struct i2c_client *client, u32 audmode) u8 data[3] = { 0x00, 0x00, 0x04 }; switch (audmode) { - case V4L2_TUNER_MODE_MONO: - case V4L2_TUNER_MODE_LANG1: - break; - case V4L2_TUNER_MODE_STEREO: - case V4L2_TUNER_MODE_LANG1_LANG2: - data[1] = 0x01; - break; - case V4L2_TUNER_MODE_LANG2: - data[1] = 0x02; - break; + case V4L2_TUNER_MODE_MONO: + case V4L2_TUNER_MODE_LANG1: + break; + case V4L2_TUNER_MODE_STEREO: + case V4L2_TUNER_MODE_LANG1_LANG2: + data[1] = 0x01; + break; + case V4L2_TUNER_MODE_LANG2: + data[1] = 0x02; + break; } - if (i2c_master_send(client, data, sizeof(data)) != sizeof(data)) { - v4l_err(client, "%s: I/O error setting audmode\n", client->name); - } - else { + if (i2c_master_send(client, data, sizeof(data)) != sizeof(data)) + v4l_err(client, "%s: I/O error setting audmode\n", + client->name); + else state->audmode = audmode; - } } -static int vp27smpx_command(struct i2c_client *client, unsigned int cmd, void *arg) +static int vp27smpx_command(struct i2c_client *client, unsigned cmd, void *arg) { struct vp27smpx_state *state = i2c_get_clientdata(client); struct v4l2_tuner *vt = arg; @@ -99,7 +98,8 @@ static int vp27smpx_command(struct i2c_client *client, unsigned int cmd, void *a break; case VIDIOC_G_CHIP_IDENT: - return v4l2_chip_ident_i2c_client(client, arg, V4L2_IDENT_VP27SMPX, 0); + return v4l2_chip_ident_i2c_client(client, arg, + V4L2_IDENT_VP27SMPX, 0); case VIDIOC_LOG_STATUS: v4l_info(client, "Audio Mode: %u%s\n", state->audmode, @@ -131,12 +131,12 @@ static int vp27smpx_probe(struct i2c_client *client) snprintf(client->name, sizeof(client->name) - 1, "vp27smpx"); - v4l_info(client, "chip found @ 0x%x (%s)\n", client->addr << 1, client->adapter->name); + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); state = kzalloc(sizeof(struct vp27smpx_state), GFP_KERNEL); - if (state == NULL) { + if (state == NULL) return -ENOMEM; - } state->audmode = V4L2_TUNER_MODE_STEREO; i2c_set_clientdata(client, state); -- cgit v1.2.3-59-g8ed1b From d52c7385ec8d4d2081b0db47e309723ce3eae816 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 12 Dec 2007 08:25:18 -0300 Subject: V4L/DVB (6866): msp3400: CodingStyle cleanups Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/msp3400-driver.c | 167 +++++++++++++++++++-------------- drivers/media/video/msp3400-kthreads.c | 166 ++++++++++++++++++-------------- 2 files changed, 195 insertions(+), 138 deletions(-) diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c index f4c14604b0b9..7a11f3159e32 100644 --- a/drivers/media/video/msp3400-driver.c +++ b/drivers/media/video/msp3400-driver.c @@ -42,7 +42,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. */ @@ -72,7 +73,8 @@ int msp_debug; /* msp_debug output */ int msp_once; /* no continous stereo monitoring */ int msp_amsound; /* hard-wire AM sound at 6.5 Hz (france), the autoscan seems work well only with FM... */ -int msp_standard = 1; /* Override auto detect of audio msp_standard, if needed. */ +int msp_standard = 1; /* Override auto detect of audio msp_standard, + if needed. */ int msp_dolby; int msp_stereo_thresh = 0x190; /* a2 threshold for stereo/bilingual @@ -82,12 +84,12 @@ int msp_stereo_thresh = 0x190; /* a2 threshold for stereo/bilingual module_param(opmode, int, 0444); /* read-write */ -module_param_named(once,msp_once, bool, 0644); -module_param_named(debug,msp_debug, int, 0644); -module_param_named(stereo_threshold,msp_stereo_thresh, int, 0644); -module_param_named(standard,msp_standard, int, 0644); -module_param_named(amsound,msp_amsound, bool, 0644); -module_param_named(dolby,msp_dolby, bool, 0644); +module_param_named(once, msp_once, bool, 0644); +module_param_named(debug, msp_debug, int, 0644); +module_param_named(stereo_threshold, msp_stereo_thresh, int, 0644); +module_param_named(standard, msp_standard, int, 0644); +module_param_named(amsound, msp_amsound, bool, 0644); +module_param_named(dolby, msp_dolby, bool, 0644); MODULE_PARM_DESC(opmode, "Forces a MSP3400 opmode. 0=Manual, 1=Autodetect, 2=Autodetect and autoselect"); MODULE_PARM_DESC(once, "No continuous stereo monitoring"); @@ -161,12 +163,13 @@ static int msp_read(struct i2c_client *client, int dev, int addr) schedule_timeout_interruptible(msecs_to_jiffies(10)); } if (err == 3) { - v4l_warn(client, "giving up, resetting chip. Sound will go off, sorry folks :-|\n"); + v4l_warn(client, "resetting chip, sound will go off.\n"); msp_reset(client); return -1; } retval = read[0] << 8 | read[1]; - v4l_dbg(3, msp_debug, client, "msp_read(0x%x, 0x%x): 0x%x\n", dev, addr, retval); + v4l_dbg(3, msp_debug, client, "msp_read(0x%x, 0x%x): 0x%x\n", + dev, addr, retval); return retval; } @@ -191,7 +194,8 @@ static int msp_write(struct i2c_client *client, int dev, int addr, int val) buffer[3] = val >> 8; buffer[4] = val & 0xff; - v4l_dbg(3, msp_debug, client, "msp_write(0x%x, 0x%x, 0x%x)\n", dev, addr, val); + v4l_dbg(3, msp_debug, client, "msp_write(0x%x, 0x%x, 0x%x)\n", + dev, addr, val); for (err = 0; err < 3; err++) { if (i2c_master_send(client, buffer, 5) == 5) break; @@ -200,7 +204,7 @@ static int msp_write(struct i2c_client *client, int dev, int addr, int val) schedule_timeout_interruptible(msecs_to_jiffies(10)); } if (err == 3) { - v4l_warn(client, "giving up, resetting chip. Sound will go off, sorry folks :-|\n"); + v4l_warn(client, "resetting chip, sound will go off.\n"); msp_reset(client); return -1; } @@ -274,7 +278,7 @@ void msp_set_scart(struct i2c_client *client, int in, int out) state->acb = 0xf60; /* Mute Input and SCART 1 Output */ v4l_dbg(1, msp_debug, client, "scart switch: %s => %d (ACB=0x%04x)\n", - scart_names[in], out, state->acb); + scart_names[in], out, state->acb); msp_write_dsp(client, 0x13, state->acb); /* Sets I2S speed 0 = 1.024 Mbps, 1 = 2.048 Mbps */ @@ -293,7 +297,8 @@ void msp_set_audio(struct i2c_client *client) val = (state->volume * 0x7f / 65535) << 8; v4l_dbg(1, msp_debug, client, "mute=%s scanning=%s volume=%d\n", - state->muted ? "on" : "off", state->scan_in_progress ? "yes" : "no", + state->muted ? "on" : "off", + state->scan_in_progress ? "yes" : "no", state->volume); msp_write_dsp(client, 0x0000, val); @@ -682,14 +687,14 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) v4l_dbg(1, msp_debug, client, "Setting I2S speed to %d\n", *a); switch (*a) { - case 1024000: - state->i2s_mode = 0; - break; - case 2048000: - state->i2s_mode = 1; - break; - default: - return -EINVAL; + case 1024000: + state->i2s_mode = 0; + break; + case 2048000: + state->i2s_mode = 1; + break; + default: + return -EINVAL; } break; } @@ -699,22 +704,22 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) struct v4l2_queryctrl *qc = arg; switch (qc->id) { - case V4L2_CID_AUDIO_VOLUME: - case V4L2_CID_AUDIO_MUTE: - return v4l2_ctrl_query_fill_std(qc); - default: - break; + case V4L2_CID_AUDIO_VOLUME: + case V4L2_CID_AUDIO_MUTE: + return v4l2_ctrl_query_fill_std(qc); + default: + break; } if (!state->has_sound_processing) return -EINVAL; switch (qc->id) { - case V4L2_CID_AUDIO_LOUDNESS: - case V4L2_CID_AUDIO_BALANCE: - case V4L2_CID_AUDIO_BASS: - case V4L2_CID_AUDIO_TREBLE: - return v4l2_ctrl_query_fill_std(qc); - default: - return -EINVAL; + case V4L2_CID_AUDIO_LOUDNESS: + case V4L2_CID_AUDIO_BALANCE: + case V4L2_CID_AUDIO_BASS: + case V4L2_CID_AUDIO_TREBLE: + return v4l2_ctrl_query_fill_std(qc); + default: + return -EINVAL; } } @@ -736,13 +741,14 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) state->volume, state->muted ? " (muted)" : ""); if (state->has_sound_processing) { v4l_info(client, "Audio: balance %d bass %d treble %d loudness %s\n", - state->balance, state->bass, state->treble, + state->balance, state->bass, + state->treble, state->loudness ? "on" : "off"); } switch (state->mode) { case MSP_MODE_AM_DETECT: p = "AM (for carrier detect)"; break; case MSP_MODE_FM_RADIO: p = "FM Radio"; break; - case MSP_MODE_FM_TERRA: p = "Terrestial FM-mono + FM-stereo"; break; + case MSP_MODE_FM_TERRA: p = "Terrestial FM-mono/stereo"; break; case MSP_MODE_FM_SAT: p = "Satellite FM-mono"; break; case MSP_MODE_FM_NICAM1: p = "NICAM/FM (B/G, D/K)"; break; case MSP_MODE_FM_NICAM2: p = "NICAM/FM (I)"; break; @@ -773,7 +779,8 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg) } case VIDIOC_G_CHIP_IDENT: - return v4l2_chip_ident_i2c_client(client, arg, state->ident, (state->rev1 << 16) | state->rev2); + return v4l2_chip_ident_i2c_client(client, arg, state->ident, + (state->rev1 << 16) | state->rev2); default: /* unknown */ @@ -816,9 +823,8 @@ static int msp_probe(struct i2c_client *client) } state = kzalloc(sizeof(*state), GFP_KERNEL); - if (!state) { + if (!state) return -ENOMEM; - } i2c_set_clientdata(client, state); @@ -840,9 +846,11 @@ static int msp_probe(struct i2c_client *client) state->rev1 = msp_read_dsp(client, 0x1e); if (state->rev1 != -1) state->rev2 = msp_read_dsp(client, 0x1f); - v4l_dbg(1, msp_debug, client, "rev1=0x%04x, rev2=0x%04x\n", state->rev1, state->rev2); + v4l_dbg(1, msp_debug, client, "rev1=0x%04x, rev2=0x%04x\n", + state->rev1, state->rev2); if (state->rev1 == -1 || (state->rev1 == 0 && state->rev2 == 0)) { - v4l_dbg(1, msp_debug, client, "not an msp3400 (cannot read chip version)\n"); + v4l_dbg(1, msp_debug, client, + "not an msp3400 (cannot read chip version)\n"); kfree(state); return -ENODEV; } @@ -860,37 +868,55 @@ static int msp_probe(struct i2c_client *client) msp_family, msp_product, msp_revision, msp_hard, msp_rom); /* Rev B=2, C=3, D=4, G=7 */ - state->ident = msp_family * 10000 + 4000 + msp_product * 10 + msp_revision - '@'; + state->ident = msp_family * 10000 + 4000 + msp_product * 10 + + msp_revision - '@'; /* Has NICAM support: all mspx41x and mspx45x products have NICAM */ - state->has_nicam = msp_prod_hi == 1 || msp_prod_hi == 5; + state->has_nicam = + msp_prod_hi == 1 || msp_prod_hi == 5; /* Has radio support: was added with revision G */ - state->has_radio = msp_revision >= 'G'; + state->has_radio = + msp_revision >= 'G'; /* Has headphones output: not for stripped down products */ - state->has_headphones = msp_prod_lo < 5; + state->has_headphones = + msp_prod_lo < 5; /* Has scart2 input: not in stripped down products of the '3' family */ - state->has_scart2 = msp_family >= 4 || msp_prod_lo < 7; + state->has_scart2 = + msp_family >= 4 || msp_prod_lo < 7; /* Has scart3 input: not in stripped down products of the '3' family */ - state->has_scart3 = msp_family >= 4 || msp_prod_lo < 5; + state->has_scart3 = + msp_family >= 4 || msp_prod_lo < 5; /* Has scart4 input: not in pre D revisions, not in stripped D revs */ - state->has_scart4 = msp_family >= 4 || (msp_revision >= 'D' && msp_prod_lo < 5); - /* Has scart2 output: not in stripped down products of the '3' family */ - state->has_scart2_out = msp_family >= 4 || msp_prod_lo < 5; + state->has_scart4 = + msp_family >= 4 || (msp_revision >= 'D' && msp_prod_lo < 5); + /* Has scart2 output: not in stripped down products of + * the '3' family */ + state->has_scart2_out = + msp_family >= 4 || msp_prod_lo < 5; /* Has scart2 a volume control? Not in pre-D revisions. */ - state->has_scart2_out_volume = msp_revision > 'C' && state->has_scart2_out; + state->has_scart2_out_volume = + msp_revision > 'C' && state->has_scart2_out; /* Has a configurable i2s out? */ - state->has_i2s_conf = msp_revision >= 'G' && msp_prod_lo < 7; - /* Has subwoofer output: not in pre-D revs and not in stripped down products */ - state->has_subwoofer = msp_revision >= 'D' && msp_prod_lo < 5; - /* Has soundprocessing (bass/treble/balance/loudness/equalizer): not in - stripped down products */ - state->has_sound_processing = msp_prod_lo < 7; + state->has_i2s_conf = + msp_revision >= 'G' && msp_prod_lo < 7; + /* Has subwoofer output: not in pre-D revs and not in stripped down + * products */ + state->has_subwoofer = + msp_revision >= 'D' && msp_prod_lo < 5; + /* Has soundprocessing (bass/treble/balance/loudness/equalizer): + * not in stripped down products */ + state->has_sound_processing = + msp_prod_lo < 7; /* Has Virtual Dolby Surround: only in msp34x1 */ - state->has_virtual_dolby_surround = msp_revision == 'G' && msp_prod_lo == 1; + state->has_virtual_dolby_surround = + msp_revision == 'G' && msp_prod_lo == 1; /* Has Virtual Dolby Surround & Dolby Pro Logic: only in msp34x2 */ - state->has_dolby_pro_logic = msp_revision == 'G' && msp_prod_lo == 2; - /* The msp343xG supports BTSC only and cannot do Automatic Standard Detection. */ - state->force_btsc = msp_family == 3 && msp_revision == 'G' && msp_prod_hi == 3; + state->has_dolby_pro_logic = + msp_revision == 'G' && msp_prod_lo == 2; + /* The msp343xG supports BTSC only and cannot do Automatic Standard + * Detection. */ + state->force_btsc = + msp_family == 3 && msp_revision == 'G' && msp_prod_hi == 3; state->opmode = opmode; if (state->opmode == OPMODE_AUTO) { @@ -905,32 +931,33 @@ static int msp_probe(struct i2c_client *client) } /* hello world :-) */ - v4l_info(client, "%s found @ 0x%x (%s)\n", client->name, client->addr << 1, client->adapter->name); + v4l_info(client, "%s found @ 0x%x (%s)\n", client->name, + client->addr << 1, client->adapter->name); v4l_info(client, "%s ", client->name); if (state->has_nicam && state->has_radio) - printk("supports nicam and radio, "); + printk(KERN_CONT "supports nicam and radio, "); else if (state->has_nicam) - printk("supports nicam, "); + printk(KERN_CONT "supports nicam, "); else if (state->has_radio) - printk("supports radio, "); - printk("mode is "); + printk(KERN_CONT "supports radio, "); + printk(KERN_CONT "mode is "); /* version-specific initialization */ switch (state->opmode) { case OPMODE_MANUAL: - printk("manual"); + printk(KERN_CONT "manual"); thread_func = msp3400c_thread; break; case OPMODE_AUTODETECT: - printk("autodetect"); + printk(KERN_CONT "autodetect"); thread_func = msp3410d_thread; break; case OPMODE_AUTOSELECT: - printk("autodetect and autoselect"); + printk(KERN_CONT "autodetect and autoselect"); thread_func = msp34xxg_thread; break; } - printk("\n"); + printk(KERN_CONT "\n"); /* startup control thread if needed */ if (thread_func) { diff --git a/drivers/media/video/msp3400-kthreads.c b/drivers/media/video/msp3400-kthreads.c index d5ee2629121e..61ec794a737e 100644 --- a/drivers/media/video/msp3400-kthreads.c +++ b/drivers/media/video/msp3400-kthreads.c @@ -15,7 +15,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. */ @@ -78,37 +79,37 @@ static struct msp3400c_init_data_dem { {75, 19, 36, 35, 39, 40}, MSP_CARRIER(5.5), MSP_CARRIER(5.5), 0x00d0, 0x0500, 0x0020, 0x3000 - },{ /* AM (for carrier detect / msp3410) */ + }, { /* AM (for carrier detect / msp3410) */ {-1, -1, -8, 2, 59, 126}, {-1, -1, -8, 2, 59, 126}, MSP_CARRIER(5.5), MSP_CARRIER(5.5), 0x00d0, 0x0100, 0x0020, 0x3000 - },{ /* FM Radio */ + }, { /* FM Radio */ {-8, -8, 4, 6, 78, 107}, {-8, -8, 4, 6, 78, 107}, MSP_CARRIER(10.7), MSP_CARRIER(10.7), 0x00d0, 0x0480, 0x0020, 0x3000 - },{ /* Terrestial FM-mono + FM-stereo */ + }, { /* Terrestial FM-mono + FM-stereo */ {3, 18, 27, 48, 66, 72}, {3, 18, 27, 48, 66, 72}, MSP_CARRIER(5.5), MSP_CARRIER(5.5), 0x00d0, 0x0480, 0x0030, 0x3000 - },{ /* Sat FM-mono */ + }, { /* Sat FM-mono */ { 1, 9, 14, 24, 33, 37}, { 3, 18, 27, 48, 66, 72}, MSP_CARRIER(6.5), MSP_CARRIER(6.5), 0x00c6, 0x0480, 0x0000, 0x3000 - },{ /* NICAM/FM -- B/G (5.5/5.85), D/K (6.5/5.85) */ + }, { /* NICAM/FM -- B/G (5.5/5.85), D/K (6.5/5.85) */ {-2, -8, -10, 10, 50, 86}, {3, 18, 27, 48, 66, 72}, MSP_CARRIER(5.5), MSP_CARRIER(5.5), 0x00d0, 0x0040, 0x0120, 0x3000 - },{ /* NICAM/FM -- I (6.0/6.552) */ + }, { /* NICAM/FM -- I (6.0/6.552) */ {2, 4, -6, -4, 40, 94}, {3, 18, 27, 48, 66, 72}, MSP_CARRIER(6.0), MSP_CARRIER(6.0), 0x00d0, 0x0040, 0x0120, 0x3000 - },{ /* NICAM/AM -- L (6.5/5.85) */ + }, { /* NICAM/AM -- L (6.5/5.85) */ {-2, -8, -10, 10, 50, 86}, {-4, -12, -9, 23, 79, 126}, MSP_CARRIER(6.5), MSP_CARRIER(6.5), @@ -224,7 +225,9 @@ void msp3400c_set_mode(struct i2c_client *client, int mode) nor do they support stereo BTSC. */ static void msp3400c_set_audmode(struct i2c_client *client) { - static char *strmode[] = { "mono", "stereo", "lang2", "lang1", "lang1+lang2" }; + static char *strmode[] = { + "mono", "stereo", "lang2", "lang1", "lang1+lang2" + }; struct msp_state *state = i2c_get_clientdata(client); char *modestr = (state->audmode >= 0 && state->audmode < 5) ? strmode[state->audmode] : "unknown"; @@ -298,19 +301,23 @@ static void msp3400c_set_audmode(struct i2c_client *client) case MSP_MODE_FM_NICAM1: case MSP_MODE_FM_NICAM2: case MSP_MODE_AM_NICAM: - v4l_dbg(1, msp_debug, client, "NICAM set_audmode: %s\n",modestr); + v4l_dbg(1, msp_debug, client, + "NICAM set_audmode: %s\n", modestr); if (state->nicam_on) src = 0x0100; /* NICAM */ break; case MSP_MODE_BTSC: - v4l_dbg(1, msp_debug, client, "BTSC set_audmode: %s\n",modestr); + v4l_dbg(1, msp_debug, client, + "BTSC set_audmode: %s\n", modestr); break; case MSP_MODE_EXTERN: - v4l_dbg(1, msp_debug, client, "extern set_audmode: %s\n",modestr); + v4l_dbg(1, msp_debug, client, + "extern set_audmode: %s\n", modestr); src = 0x0200; /* SCART */ break; case MSP_MODE_FM_RADIO: - v4l_dbg(1, msp_debug, client, "FM-Radio set_audmode: %s\n",modestr); + v4l_dbg(1, msp_debug, client, + "FM-Radio set_audmode: %s\n", modestr); break; default: v4l_dbg(1, msp_debug, client, "mono set_audmode\n"); @@ -342,7 +349,8 @@ static void msp3400c_set_audmode(struct i2c_client *client) src |= 0x0010; break; } - v4l_dbg(1, msp_debug, client, "set_audmode final source/matrix = 0x%x\n", src); + v4l_dbg(1, msp_debug, client, + "set_audmode final source/matrix = 0x%x\n", src); msp_set_source(client, src); } @@ -351,22 +359,26 @@ static void msp3400c_print_mode(struct i2c_client *client) { struct msp_state *state = i2c_get_clientdata(client); - if (state->main == state->second) { - v4l_dbg(1, msp_debug, client, "mono sound carrier: %d.%03d MHz\n", - state->main / 910000, (state->main / 910) % 1000); - } else { - v4l_dbg(1, msp_debug, client, "main sound carrier: %d.%03d MHz\n", - state->main / 910000, (state->main / 910) % 1000); - } + if (state->main == state->second) + v4l_dbg(1, msp_debug, client, + "mono sound carrier: %d.%03d MHz\n", + state->main / 910000, (state->main / 910) % 1000); + else + v4l_dbg(1, msp_debug, client, + "main sound carrier: %d.%03d MHz\n", + state->main / 910000, (state->main / 910) % 1000); if (state->mode == MSP_MODE_FM_NICAM1 || state->mode == MSP_MODE_FM_NICAM2) - v4l_dbg(1, msp_debug, client, "NICAM/FM carrier : %d.%03d MHz\n", - state->second / 910000, (state->second/910) % 1000); + v4l_dbg(1, msp_debug, client, + "NICAM/FM carrier : %d.%03d MHz\n", + state->second / 910000, (state->second/910) % 1000); if (state->mode == MSP_MODE_AM_NICAM) - v4l_dbg(1, msp_debug, client, "NICAM/AM carrier : %d.%03d MHz\n", - state->second / 910000, (state->second / 910) % 1000); + v4l_dbg(1, msp_debug, client, + "NICAM/AM carrier : %d.%03d MHz\n", + state->second / 910000, (state->second / 910) % 1000); if (state->mode == MSP_MODE_FM_TERRA && state->main != state->second) { - v4l_dbg(1, msp_debug, client, "FM-stereo carrier : %d.%03d MHz\n", - state->second / 910000, (state->second / 910) % 1000); + v4l_dbg(1, msp_debug, client, + "FM-stereo carrier : %d.%03d MHz\n", + state->second / 910000, (state->second / 910) % 1000); } } @@ -385,7 +397,8 @@ static int msp3400c_detect_stereo(struct i2c_client *client) val = msp_read_dsp(client, 0x18); if (val > 32767) val -= 65536; - v4l_dbg(2, msp_debug, client, "stereo detect register: %d\n", val); + v4l_dbg(2, msp_debug, client, + "stereo detect register: %d\n", val); if (val > 8192) { rxsubchans = V4L2_TUNER_SUB_STEREO; } else if (val < -4096) { @@ -430,7 +443,8 @@ static int msp3400c_detect_stereo(struct i2c_client *client) } if (rxsubchans != state->rxsubchans) { update = 1; - v4l_dbg(1, msp_debug, client, "watch: rxsubchans %02x => %02x\n", + v4l_dbg(1, msp_debug, client, + "watch: rxsubchans %02x => %02x\n", state->rxsubchans, rxsubchans); state->rxsubchans = rxsubchans; } @@ -452,9 +466,8 @@ static void watch_stereo(struct i2c_client *client) { struct msp_state *state = i2c_get_clientdata(client); - if (msp_detect_stereo(client)) { + if (msp_detect_stereo(client)) msp_set_audmode(client); - } if (msp_once) state->watch_stereo = 0; @@ -465,7 +478,7 @@ int msp3400c_thread(void *data) struct i2c_client *client = data; struct msp_state *state = i2c_get_clientdata(client); struct msp3400c_carrier_detect *cd; - int count, max1, max2, val1, val2, val, this; + int count, max1, max2, val1, val2, val, i; v4l_dbg(1, msp_debug, client, "msp3400 daemon started\n"); @@ -475,7 +488,7 @@ int msp3400c_thread(void *data) msp_sleep(state, -1); v4l_dbg(2, msp_debug, client, "msp3400 thread: wakeup\n"); - restart: +restart: v4l_dbg(2, msp_debug, client, "thread: restart scan\n"); state->restart = 0; if (kthread_should_stop()) @@ -483,7 +496,8 @@ int msp3400c_thread(void *data) if (state->radio || MSP_MODE_EXTERN == state->mode) { /* no carrier scan, just unmute */ - v4l_dbg(1, msp_debug, client, "thread: no carrier scan\n"); + v4l_dbg(1, msp_debug, client, + "thread: no carrier scan\n"); state->scan_in_progress = 0; msp_set_audio(client); continue; @@ -514,16 +528,17 @@ int msp3400c_thread(void *data) v4l_dbg(1, msp_debug, client, "AM sound override\n"); } - for (this = 0; this < count; this++) { - msp3400c_set_carrier(client, cd[this].cdo, cd[this].cdo); - if (msp_sleep(state,100)) + for (i = 0; i < count; i++) { + msp3400c_set_carrier(client, cd[i].cdo, cd[i].cdo); + if (msp_sleep(state, 100)) goto restart; val = msp_read_dsp(client, 0x1b); if (val > 32767) val -= 65536; if (val1 < val) - val1 = val, max1 = this; - v4l_dbg(1, msp_debug, client, "carrier1 val: %5d / %s\n", val,cd[this].name); + val1 = val, max1 = i; + v4l_dbg(1, msp_debug, client, + "carrier1 val: %5d / %s\n", val, cd[i].name); } /* carrier detect pass #2 -- second (stereo) carrier */ @@ -550,16 +565,17 @@ int msp3400c_thread(void *data) count = 0; max2 = 0; } - for (this = 0; this < count; this++) { - msp3400c_set_carrier(client, cd[this].cdo, cd[this].cdo); - if (msp_sleep(state,100)) + for (i = 0; i < count; i++) { + msp3400c_set_carrier(client, cd[i].cdo, cd[i].cdo); + if (msp_sleep(state, 100)) goto restart; val = msp_read_dsp(client, 0x1b); if (val > 32767) val -= 65536; if (val2 < val) - val2 = val, max2 = this; - v4l_dbg(1, msp_debug, client, "carrier2 val: %5d / %s\n", val,cd[this].name); + val2 = val, max2 = i; + v4l_dbg(1, msp_debug, client, + "carrier2 val: %5d / %s\n", val, cd[i].name); } /* program the msp3400 according to the results */ @@ -611,7 +627,7 @@ int msp3400c_thread(void *data) break; case 0: /* 4.5 */ default: - no_second: +no_second: state->second = msp3400c_carrier_detect_main[max1].cdo; msp3400c_set_mode(client, MSP_MODE_FM_TERRA); break; @@ -632,7 +648,8 @@ int msp3400c_thread(void *data) while (state->watch_stereo) { if (msp_sleep(state, count ? 1000 : 5000)) goto restart; - if (count) count--; + if (count) + count--; watch_stereo(client); } } @@ -651,10 +668,10 @@ int msp3410d_thread(void *data) set_freezable(); for (;;) { v4l_dbg(2, msp_debug, client, "msp3410 thread: sleep\n"); - msp_sleep(state,-1); + msp_sleep(state, -1); v4l_dbg(2, msp_debug, client, "msp3410 thread: wakeup\n"); - restart: +restart: v4l_dbg(2, msp_debug, client, "thread: restart scan\n"); state->restart = 0; if (kthread_should_stop()) @@ -662,7 +679,8 @@ int msp3410d_thread(void *data) if (state->mode == MSP_MODE_EXTERN) { /* no carrier scan needed, just unmute */ - v4l_dbg(1, msp_debug, client, "thread: no carrier scan\n"); + v4l_dbg(1, msp_debug, client, + "thread: no carrier scan\n"); state->scan_in_progress = 0; msp_set_audio(client); continue; @@ -673,7 +691,8 @@ int msp3410d_thread(void *data) msp_set_audio(client); /* start autodetect. Note: autodetect is not supported for - NTSC-M and radio, hence we force the standard in those cases. */ + NTSC-M and radio, hence we force the standard in those + cases. */ if (state->radio) std = 0x40; else @@ -686,8 +705,9 @@ int msp3410d_thread(void *data) goto restart; if (msp_debug) - v4l_dbg(2, msp_debug, client, "setting standard: %s (0x%04x)\n", - msp_standard_std_name(std), std); + v4l_dbg(2, msp_debug, client, + "setting standard: %s (0x%04x)\n", + msp_standard_std_name(std), std); if (std != 1) { /* programmed some specific mode */ @@ -703,7 +723,8 @@ int msp3410d_thread(void *data) val = msp_read_dem(client, 0x7e); if (val < 0x07ff) break; - v4l_dbg(2, msp_debug, client, "detection still in progress\n"); + v4l_dbg(2, msp_debug, client, + "detection still in progress\n"); } } for (i = 0; msp_stdlist[i].name != NULL; i++) @@ -716,12 +737,13 @@ int msp3410d_thread(void *data) state->std = val; state->rxsubchans = V4L2_TUNER_SUB_MONO; - if (msp_amsound && !state->radio && (state->v4l2_std & V4L2_STD_SECAM) && - (val != 0x0009)) { + if (msp_amsound && !state->radio && + (state->v4l2_std & V4L2_STD_SECAM) && (val != 0x0009)) { /* autodetection has failed, let backup */ v4l_dbg(1, msp_debug, client, "autodetection failed," " switching to backup standard: %s (0x%04x)\n", - msp_stdlist[8].name ? msp_stdlist[8].name : "unknown",val); + msp_stdlist[8].name ? + msp_stdlist[8].name : "unknown", val); state->std = val = 0x0009; msp_write_dem(client, 0x20, val); } @@ -786,7 +808,8 @@ int msp3410d_thread(void *data) while (state->watch_stereo) { if (msp_sleep(state, count ? 1000 : 5000)) goto restart; - if (count) count--; + if (count) + count--; watch_stereo(client); } } @@ -872,8 +895,8 @@ static void msp34xxg_set_source(struct i2c_client *client, u16 reg, int in) else source = (in << 8) | matrix; - v4l_dbg(1, msp_debug, client, "set source to %d (0x%x) for output %02x\n", - in, source, reg); + v4l_dbg(1, msp_debug, client, + "set source to %d (0x%x) for output %02x\n", in, source, reg); msp_write_dsp(client, reg, source); } @@ -948,7 +971,7 @@ int msp34xxg_thread(void *data) msp_sleep(state, -1); v4l_dbg(2, msp_debug, client, "msp34xxg thread: wakeup\n"); - restart: +restart: v4l_dbg(1, msp_debug, client, "thread: restart scan\n"); state->restart = 0; if (kthread_should_stop()) @@ -956,7 +979,8 @@ int msp34xxg_thread(void *data) if (state->mode == MSP_MODE_EXTERN) { /* no carrier scan needed, just unmute */ - v4l_dbg(1, msp_debug, client, "thread: no carrier scan\n"); + v4l_dbg(1, msp_debug, client, + "thread: no carrier scan\n"); state->scan_in_progress = 0; msp_set_audio(client); continue; @@ -972,7 +996,8 @@ int msp34xxg_thread(void *data) goto unmute; /* watch autodetect */ - v4l_dbg(1, msp_debug, client, "started autodetect, waiting for result\n"); + v4l_dbg(1, msp_debug, client, + "started autodetect, waiting for result\n"); for (i = 0; i < 10; i++) { if (msp_sleep(state, 100)) goto restart; @@ -983,15 +1008,18 @@ int msp34xxg_thread(void *data) state->std = val; break; } - v4l_dbg(2, msp_debug, client, "detection still in progress\n"); + v4l_dbg(2, msp_debug, client, + "detection still in progress\n"); } if (state->std == 1) { - v4l_dbg(1, msp_debug, client, "detection still in progress after 10 tries. giving up.\n"); + v4l_dbg(1, msp_debug, client, + "detection still in progress after 10 tries. giving up.\n"); continue; } - unmute: - v4l_dbg(1, msp_debug, client, "detected standard: %s (0x%04x)\n", +unmute: + v4l_dbg(1, msp_debug, client, + "detected standard: %s (0x%04x)\n", msp_standard_std_name(state->std), state->std); if (state->std == 9) { @@ -1046,9 +1074,11 @@ static int msp34xxg_detect_stereo(struct i2c_client *client) if (state->std == 0x20) state->rxsubchans |= V4L2_TUNER_SUB_SAP; else - state->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; + state->rxsubchans = + V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; } - v4l_dbg(1, msp_debug, client, "status=0x%x, stereo=%d, bilingual=%d -> rxsubchans=%d\n", + v4l_dbg(1, msp_debug, client, + "status=0x%x, stereo=%d, bilingual=%d -> rxsubchans=%d\n", status, is_stereo, is_bilingual, state->rxsubchans); return (oldrx != state->rxsubchans); } -- cgit v1.2.3-59-g8ed1b From 9fad368b6dff95b8b009a6b8eed42a549a05b263 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 12 Dec 2007 10:23:52 -0300 Subject: V4L/DVB (6867): saa7127: CodingStyle cleanups Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7127.c | 61 +++++++++++++++++++++++-------------------- 1 file changed, 32 insertions(+), 29 deletions(-) diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c index b146eedfc7a6..06c88db656b4 100644 --- a/drivers/media/video/saa7127.c +++ b/drivers/media/video/saa7127.c @@ -58,8 +58,8 @@ #include #include -static int debug = 0; -static int test_image = 0; +static int debug; +static int test_image; MODULE_DESCRIPTION("Philips SAA7127/9 video encoder driver"); MODULE_AUTHOR("Kevin Thayer, Chris Kennedy, Hans Verkuil"); @@ -357,9 +357,10 @@ static int saa7127_set_cc(struct i2c_client *client, struct v4l2_sliced_vbi_data if (enable && (data->field != 0 || data->line != 21)) return -EINVAL; if (state->cc_enable != enable) { - v4l_dbg(1, debug, client, "Turn CC %s\n", enable ? "on" : "off"); + v4l_dbg(1, debug, client, + "Turn CC %s\n", enable ? "on" : "off"); saa7127_write(client, SAA7127_REG_CLOSED_CAPTION, - (state->xds_enable << 7) | (enable << 6) | 0x11); + (state->xds_enable << 7) | (enable << 6) | 0x11); state->cc_enable = enable; } if (!enable) @@ -417,7 +418,8 @@ static int saa7127_set_wss(struct i2c_client *client, struct v4l2_sliced_vbi_dat saa7127_write(client, 0x26, data->data[0]); saa7127_write(client, 0x27, 0x80 | (data->data[1] & 0x3f)); - v4l_dbg(1, debug, client, "WSS mode: %s\n", wss_strs[data->data[0] & 0xf]); + v4l_dbg(1, debug, client, + "WSS mode: %s\n", wss_strs[data->data[0] & 0xf]); state->wss_mode = (data->data[1] & 0x3f) << 8 | data->data[0]; return 0; } @@ -504,7 +506,8 @@ static int saa7127_set_output_type(struct i2c_client *client, int output) default: return -EINVAL; } - v4l_dbg(1, debug, client, "Selecting %s output type\n", output_strs[output]); + v4l_dbg(1, debug, client, + "Selecting %s output type\n", output_strs[output]); /* Configure Encoder */ saa7127_write(client, 0x2d, state->reg_2d); @@ -566,12 +569,10 @@ static int saa7127_command(struct i2c_client *client, { int rc = 0; - if (state->input_type != route->input) { + if (state->input_type != route->input) rc = saa7127_set_input_type(client, route->input); - } - if (rc == 0 && state->output_type != route->output) { + if (rc == 0 && state->output_type != route->output) rc = saa7127_set_output_type(client, route->output); - } return rc; } @@ -617,7 +618,8 @@ static int saa7127_command(struct i2c_client *client, { struct v4l2_register *reg = arg; - if (!v4l2_chip_match_i2c_client(client, reg->match_type, reg->match_chip)) + if (!v4l2_chip_match_i2c_client(client, + reg->match_type, reg->match_chip)) return -EINVAL; if (!capable(CAP_SYS_ADMIN)) return -EPERM; @@ -634,16 +636,16 @@ static int saa7127_command(struct i2c_client *client, struct v4l2_sliced_vbi_data *data = arg; switch (data->id) { - case V4L2_SLICED_WSS_625: - return saa7127_set_wss(client, data); - case V4L2_SLICED_VPS: - return saa7127_set_vps(client, data); - case V4L2_SLICED_CAPTION_525: - if (data->field == 0) - return saa7127_set_cc(client, data); - return saa7127_set_xds(client, data); - default: - return -EINVAL; + case V4L2_SLICED_WSS_625: + return saa7127_set_wss(client, data); + case V4L2_SLICED_VPS: + return saa7127_set_vps(client, data); + case V4L2_SLICED_CAPTION_525: + if (data->field == 0) + return saa7127_set_cc(client, data); + return saa7127_set_xds(client, data); + default: + return -EINVAL; } break; } @@ -671,7 +673,8 @@ static int saa7127_probe(struct i2c_client *client) snprintf(client->name, sizeof(client->name) - 1, "saa7127"); - v4l_dbg(1, debug, client, "detecting saa7127 client on address 0x%x\n", client->addr << 1); + v4l_dbg(1, debug, client, "detecting saa7127 client on address 0x%x\n", + client->addr << 1); /* First test register 0: Bits 5-7 are a version ID (should be 0), and bit 2 should also be 0. @@ -685,9 +688,8 @@ static int saa7127_probe(struct i2c_client *client) } state = kzalloc(sizeof(struct saa7127_state), GFP_KERNEL); - if (state == NULL) { + if (state == NULL) return -ENOMEM; - } i2c_set_clientdata(client, state); @@ -701,25 +703,26 @@ static int saa7127_probe(struct i2c_client *client) saa7127_set_wss(client, &vbi); saa7127_set_cc(client, &vbi); saa7127_set_xds(client, &vbi); - if (test_image == 1) { + if (test_image == 1) /* The Encoder has an internal Colorbar generator */ /* This can be used for debugging */ saa7127_set_input_type(client, SAA7127_INPUT_TYPE_TEST_IMAGE); - } else { + else saa7127_set_input_type(client, SAA7127_INPUT_TYPE_NORMAL); - } saa7127_set_video_enable(client, 1); /* Detect if it's an saa7129 */ read_result = saa7127_read(client, SAA7129_REG_FADE_KEY_COL2); saa7127_write(client, SAA7129_REG_FADE_KEY_COL2, 0xaa); if (saa7127_read(client, SAA7129_REG_FADE_KEY_COL2) == 0xaa) { - v4l_info(client, "saa7129 found @ 0x%x (%s)\n", client->addr << 1, client->adapter->name); + v4l_info(client, "saa7129 found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); saa7127_write(client, SAA7129_REG_FADE_KEY_COL2, read_result); saa7127_write_inittab(client, saa7129_init_config_extra); state->ident = V4L2_IDENT_SAA7129; } else { - v4l_info(client, "saa7127 found @ 0x%x (%s)\n", client->addr << 1, client->adapter->name); + v4l_info(client, "saa7127 found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); state->ident = V4L2_IDENT_SAA7127; } return 0; -- cgit v1.2.3-59-g8ed1b From 0b394def21e7d3bd02aeee5570473582ce7984ec Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 18 Dec 2007 19:27:31 -0300 Subject: V4L/DVB (6868): i2c-id.h: add I2C_DRIVERID_CS5345 Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- include/linux/i2c-id.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index adbdc6da39ca..c7a51a196f51 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -126,6 +126,7 @@ #define I2C_DRIVERID_VP27SMPX 93 /* Panasonic VP27s tuner internal MPX */ #define I2C_DRIVERID_CS4270 94 /* Cirrus Logic 4270 audio codec */ #define I2C_DRIVERID_M52790 95 /* Mitsubishi M52790SP/FP AV switch */ +#define I2C_DRIVERID_CS5345 96 /* cs5345 audio processor */ #define I2C_DRIVERID_I2CDEV 900 #define I2C_DRIVERID_ARP 902 /* SMBus ARP Client */ -- cgit v1.2.3-59-g8ed1b From 6fb377f85cb8c2c1580ce8b134c887a7b53c7aa9 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 18 Dec 2007 19:40:44 -0300 Subject: V4L/DVB (6869): cs5345: new i2c driver Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/Kconfig | 10 +++ drivers/media/video/Makefile | 1 + drivers/media/video/cs5345.c | 168 ++++++++++++++++++++++++++++++++++++++++ include/media/cs5345.h | 39 ++++++++++ include/media/v4l2-chip-ident.h | 3 + 5 files changed, 221 insertions(+) create mode 100644 drivers/media/video/cs5345.c create mode 100644 include/media/cs5345.h diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 6c7835629bcd..7431f6da5cae 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -109,6 +109,16 @@ config VIDEO_MSP3400 To compile this driver as a module, choose M here: the module will be called msp3400. +config VIDEO_CS5345 + tristate "Cirrus Logic CS5345 audio ADC" + depends on VIDEO_V4L2 && I2C && EXPERIMENTAL + ---help--- + Support for the Cirrus Logic CS5345 24-bit, 192 kHz + stereo A/D converter. + + To compile this driver as a module, choose M here: the + module will be called cs5345. + config VIDEO_CS53L32A tristate "Cirrus Logic CS53L32A audio ADC" depends on VIDEO_V4L2 && I2C diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index a837e1ea518f..74a2a1c45fe3 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -66,6 +66,7 @@ obj-$(CONFIG_VIDEO_USBVISION) += usbvision/ obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o obj-$(CONFIG_VIDEO_PVRUSB2) += pvrusb2/ obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o +obj-$(CONFIG_VIDEO_CS5345) += cs5345.o obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o obj-$(CONFIG_VIDEO_M52790) += m52790.o obj-$(CONFIG_VIDEO_TLV320AIC23B) += tlv320aic23b.o diff --git a/drivers/media/video/cs5345.c b/drivers/media/video/cs5345.c new file mode 100644 index 000000000000..fae469ce16f5 --- /dev/null +++ b/drivers/media/video/cs5345.c @@ -0,0 +1,168 @@ +/* + * cs5345 Cirrus Logic 24-bit, 192 kHz Stereo Audio ADC + * Copyright (C) 2007 Hans Verkuil + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("i2c device driver for cs5345 Audio ADC"); +MODULE_AUTHOR("Hans Verkuil"); +MODULE_LICENSE("GPL"); + +static int debug; + +module_param(debug, bool, 0644); + +MODULE_PARM_DESC(debug, "Debugging messages\n\t\t\t0=Off (default), 1=On"); + + +/* ----------------------------------------------------------------------- */ + +static inline int cs5345_write(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +static inline int cs5345_read(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static int cs5345_command(struct i2c_client *client, unsigned cmd, void *arg) +{ + struct v4l2_routing *route = arg; + struct v4l2_control *ctrl = arg; + + switch (cmd) { + case VIDIOC_INT_G_AUDIO_ROUTING: + route->input = cs5345_read(client, 0x09) & 7; + route->input |= cs5345_read(client, 0x05) & 0x70; + route->output = 0; + break; + + case VIDIOC_INT_S_AUDIO_ROUTING: + if ((route->input & 0xf) > 6) { + v4l_err(client, "Invalid input %d.\n", route->input); + return -EINVAL; + } + cs5345_write(client, 0x09, route->input & 0xf); + cs5345_write(client, 0x05, route->input & 0xf0); + break; + + case VIDIOC_G_CTRL: + if (ctrl->id == V4L2_CID_AUDIO_MUTE) { + ctrl->value = (cs5345_read(client, 0x04) & 0x08) != 0; + break; + } + if (ctrl->id != V4L2_CID_AUDIO_VOLUME) + return -EINVAL; + ctrl->value = cs5345_read(client, 0x07) & 0x3f; + if (ctrl->value >= 32) + ctrl->value = ctrl->value - 64; + break; + + case VIDIOC_S_CTRL: + break; + if (ctrl->id == V4L2_CID_AUDIO_MUTE) { + cs5345_write(client, 0x04, ctrl->value ? 0x80 : 0); + break; + } + if (ctrl->id != V4L2_CID_AUDIO_VOLUME) + return -EINVAL; + if (ctrl->value > 24 || ctrl->value < -24) + return -EINVAL; + cs5345_write(client, 0x07, ((u8)ctrl->value) & 0x3f); + cs5345_write(client, 0x08, ((u8)ctrl->value) & 0x3f); + break; + +#ifdef CONFIG_VIDEO_ADV_DEBUG + case VIDIOC_DBG_G_REGISTER: + case VIDIOC_DBG_S_REGISTER: + { + struct v4l2_register *reg = arg; + + if (!v4l2_chip_match_i2c_client(client, + reg->match_type, reg->match_chip)) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + if (cmd == VIDIOC_DBG_G_REGISTER) + reg->val = cs5345_read(client, reg->reg & 0x1f); + else + cs5345_write(client, reg->reg & 0x1f, reg->val & 0x1f); + break; + } +#endif + + case VIDIOC_G_CHIP_IDENT: + return v4l2_chip_ident_i2c_client(client, + arg, V4L2_IDENT_CS5345, 0); + + case VIDIOC_LOG_STATUS: + { + u8 v = cs5345_read(client, 0x09) & 7; + u8 m = cs5345_read(client, 0x04); + int vol = cs5345_read(client, 0x08) & 0x3f; + + v4l_info(client, "Input: %d%s\n", v, + (m & 0x80) ? " (muted)" : ""); + if (vol >= 32) + vol = vol - 64; + v4l_info(client, "Volume: %d dB\n", vol); + break; + } + + default: + return -EINVAL; + } + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static int cs5345_probe(struct i2c_client *client) +{ + /* Check if the adapter supports the needed features */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + cs5345_write(client, 0x02, 0x00); + cs5345_write(client, 0x04, 0x01); + cs5345_write(client, 0x09, 0x01); + return 0; +} + +/* ----------------------------------------------------------------------- */ + +static struct v4l2_i2c_driver_data v4l2_i2c_data = { + .name = "cs5345", + .driverid = I2C_DRIVERID_CS5345, + .command = cs5345_command, + .probe = cs5345_probe, +}; + diff --git a/include/media/cs5345.h b/include/media/cs5345.h new file mode 100644 index 000000000000..6ccae24e65ed --- /dev/null +++ b/include/media/cs5345.h @@ -0,0 +1,39 @@ +/* + cs5345.h - definition for cs5345 inputs and outputs + + Copyright (C) 2007 Hans Verkuil (hverkuil@xs4all.nl) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef _CS5345_H_ +#define _CS5345_H_ + +/* CS5345 HW inputs */ +#define CS5345_IN_MIC 0 +#define CS5345_IN_1 1 +#define CS5345_IN_2 2 +#define CS5345_IN_3 3 +#define CS5345_IN_4 4 +#define CS5345_IN_5 5 +#define CS5345_IN_6 6 + +#define CS5345_MCLK_1 0x00 +#define CS5345_MCLK_1_5 0x10 +#define CS5345_MCLK_2 0x20 +#define CS5345_MCLK_3 0x30 +#define CS5345_MCLK_4 0x40 + +#endif diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h index 2442c281e4fe..032bb75f69c2 100644 --- a/include/media/v4l2-chip-ident.h +++ b/include/media/v4l2-chip-ident.h @@ -68,6 +68,9 @@ enum { /* module vp27smpx: just ident 2700 */ V4L2_IDENT_VP27SMPX = 2700, + /* module cs5345: just ident 5345 */ + V4L2_IDENT_CS5345 = 5345, + /* module wm8739: just ident 8739 */ V4L2_IDENT_WM8739 = 8739, -- cgit v1.2.3-59-g8ed1b From 89f6475857b89e956a8bcfef64944409ce4173b4 Mon Sep 17 00:00:00 2001 From: Matthias Schwarzott Date: Fri, 21 Dec 2007 08:56:44 -0300 Subject: V4L/DVB (6873): Fixes issues listed by checkpatch Signed-off-by: Matthias Schwarzott Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/mt312.c | 131 ++++++++++++++++++++---------------- drivers/media/dvb/frontends/mt312.h | 15 ++--- 2 files changed, 80 insertions(+), 66 deletions(-) diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c index 0606b9a5b616..55d42440e979 100644 --- a/drivers/media/dvb/frontends/mt312.c +++ b/drivers/media/dvb/frontends/mt312.c @@ -37,9 +37,9 @@ struct mt312_state { - struct i2c_adapter* i2c; + struct i2c_adapter *i2c; /* configuration settings */ - const struct mt312_config* config; + const struct mt312_config *config; struct dvb_frontend frontend; u8 id; @@ -49,14 +49,15 @@ struct mt312_state { static int debug; #define dprintk(args...) \ do { \ - if (debug) printk(KERN_DEBUG "mt312: " args); \ + if (debug) \ + printk(KERN_DEBUG "mt312: " args); \ } while (0) #define MT312_SYS_CLK 90000000UL /* 90 MHz */ #define MT312_LPOWER_SYS_CLK 60000000UL /* 60 MHz */ #define MT312_PLL_CLK 10000000UL /* 10 MHz */ -static int mt312_read(struct mt312_state* state, const enum mt312_reg_addr reg, +static int mt312_read(struct mt312_state *state, const enum mt312_reg_addr reg, void *buf, const size_t count) { int ret; @@ -79,7 +80,7 @@ static int mt312_read(struct mt312_state* state, const enum mt312_reg_addr reg, return -EREMOTEIO; } - if(debug) { + if (debug) { int i; dprintk("R(%d):", reg & 0x7f); for (i = 0; i < count; i++) @@ -90,14 +91,14 @@ static int mt312_read(struct mt312_state* state, const enum mt312_reg_addr reg, return 0; } -static int mt312_write(struct mt312_state* state, const enum mt312_reg_addr reg, +static int mt312_write(struct mt312_state *state, const enum mt312_reg_addr reg, const void *src, const size_t count) { int ret; u8 buf[count + 1]; struct i2c_msg msg; - if(debug) { + if (debug) { int i; dprintk("W(%d):", reg & 0x7f); for (i = 0; i < count; i++) @@ -123,13 +124,13 @@ static int mt312_write(struct mt312_state* state, const enum mt312_reg_addr reg, return 0; } -static inline int mt312_readreg(struct mt312_state* state, +static inline int mt312_readreg(struct mt312_state *state, const enum mt312_reg_addr reg, u8 *val) { return mt312_read(state, reg, val, 1); } -static inline int mt312_writereg(struct mt312_state* state, +static inline int mt312_writereg(struct mt312_state *state, const enum mt312_reg_addr reg, const u8 val) { return mt312_write(state, reg, &val, 1); @@ -140,12 +141,12 @@ static inline u32 mt312_div(u32 a, u32 b) return (a + (b / 2)) / b; } -static int mt312_reset(struct mt312_state* state, const u8 full) +static int mt312_reset(struct mt312_state *state, const u8 full) { return mt312_writereg(state, RESET, full ? 0x80 : 0x40); } -static int mt312_get_inversion(struct mt312_state* state, +static int mt312_get_inversion(struct mt312_state *state, fe_spectral_inversion_t *i) { int ret; @@ -160,7 +161,7 @@ static int mt312_get_inversion(struct mt312_state* state, return 0; } -static int mt312_get_symbol_rate(struct mt312_state* state, u32 *sr) +static int mt312_get_symbol_rate(struct mt312_state *state, u32 *sr) { int ret; u8 sym_rate_h; @@ -172,7 +173,8 @@ static int mt312_get_symbol_rate(struct mt312_state* state, u32 *sr) if ((ret = mt312_readreg(state, SYM_RATE_H, &sym_rate_h)) < 0) return ret; - if (sym_rate_h & 0x80) { /* symbol rate search was used */ + if (sym_rate_h & 0x80) { + /* symbol rate search was used */ if ((ret = mt312_writereg(state, MON_CTRL, 0x03)) < 0) return ret; @@ -192,7 +194,8 @@ static int mt312_get_symbol_rate(struct mt312_state* state, u32 *sr) dec_ratio = ((buf[0] >> 5) & 0x07) * 32; - if ((ret = mt312_read(state, SYM_RAT_OP_H, buf, sizeof(buf))) < 0) + if ((ret = mt312_read(state, SYM_RAT_OP_H, buf, + sizeof(buf))) < 0) return ret; sym_rat_op = (buf[0] << 8) | buf[1]; @@ -207,7 +210,7 @@ static int mt312_get_symbol_rate(struct mt312_state* state, u32 *sr) return 0; } -static int mt312_get_code_rate(struct mt312_state* state, fe_code_rate_t *cr) +static int mt312_get_code_rate(struct mt312_state *state, fe_code_rate_t *cr) { const fe_code_rate_t fec_tab[8] = { FEC_1_2, FEC_2_3, FEC_3_4, FEC_5_6, FEC_6_7, FEC_7_8, @@ -224,14 +227,15 @@ static int mt312_get_code_rate(struct mt312_state* state, fe_code_rate_t *cr) return 0; } -static int mt312_initfe(struct dvb_frontend* fe) +static int mt312_initfe(struct dvb_frontend *fe) { struct mt312_state *state = fe->demodulator_priv; int ret; u8 buf[2]; /* wake up */ - if ((ret = mt312_writereg(state, CONFIG, (state->frequency == 60 ? 0x88 : 0x8c))) < 0) + if ((ret = mt312_writereg(state, CONFIG, + (state->frequency == 60 ? 0x88 : 0x8c))) < 0) return ret; /* wait at least 150 usec */ @@ -241,17 +245,20 @@ static int mt312_initfe(struct dvb_frontend* fe) if ((ret = mt312_reset(state, 1)) < 0) return ret; -// Per datasheet, write correct values. 09/28/03 ACCJr. -// If we don't do this, we won't get FE_HAS_VITERBI in the VP310. +/* Per datasheet, write correct values. 09/28/03 ACCJr. + * If we don't do this, we won't get FE_HAS_VITERBI in the VP310. */ { - u8 buf_def[8]={0x14, 0x12, 0x03, 0x02, 0x01, 0x00, 0x00, 0x00}; + u8 buf_def[8] = { 0x14, 0x12, 0x03, 0x02, + 0x01, 0x00, 0x00, 0x00 }; - if ((ret = mt312_write(state, VIT_SETUP, buf_def, sizeof(buf_def))) < 0) + if ((ret = mt312_write(state, VIT_SETUP, buf_def, + sizeof(buf_def))) < 0) return ret; } /* SYS_CLK */ - buf[0] = mt312_div((state->frequency == 60 ? MT312_LPOWER_SYS_CLK : MT312_SYS_CLK) * 2, 1000000); + buf[0] = mt312_div((state->frequency == 60 ? MT312_LPOWER_SYS_CLK : + MT312_SYS_CLK) * 2, 1000000); /* DISEQC_RATIO */ buf[1] = mt312_div(MT312_PLL_CLK, 15000 * 4); @@ -278,7 +285,7 @@ static int mt312_initfe(struct dvb_frontend* fe) return 0; } -static int mt312_send_master_cmd(struct dvb_frontend* fe, +static int mt312_send_master_cmd(struct dvb_frontend *fe, struct dvb_diseqc_master_cmd *c) { struct mt312_state *state = fe->demodulator_priv; @@ -303,14 +310,14 @@ static int mt312_send_master_cmd(struct dvb_frontend* fe, /* set DISEQC_MODE[2:0] to zero if a return message is expected */ if (c->msg[0] & 0x02) - if ((ret = - mt312_writereg(state, DISEQC_MODE, (diseqc_mode & 0x40))) < 0) + if ((ret = mt312_writereg(state, DISEQC_MODE, + (diseqc_mode & 0x40))) < 0) return ret; return 0; } -static int mt312_send_burst(struct dvb_frontend* fe, const fe_sec_mini_cmd_t c) +static int mt312_send_burst(struct dvb_frontend *fe, const fe_sec_mini_cmd_t c) { struct mt312_state *state = fe->demodulator_priv; const u8 mini_tab[2] = { 0x02, 0x03 }; @@ -332,7 +339,7 @@ static int mt312_send_burst(struct dvb_frontend* fe, const fe_sec_mini_cmd_t c) return 0; } -static int mt312_set_tone(struct dvb_frontend* fe, const fe_sec_tone_mode_t t) +static int mt312_set_tone(struct dvb_frontend *fe, const fe_sec_tone_mode_t t) { struct mt312_state *state = fe->demodulator_priv; const u8 tone_tab[2] = { 0x01, 0x00 }; @@ -354,7 +361,7 @@ static int mt312_set_tone(struct dvb_frontend* fe, const fe_sec_tone_mode_t t) return 0; } -static int mt312_set_voltage(struct dvb_frontend* fe, const fe_sec_voltage_t v) +static int mt312_set_voltage(struct dvb_frontend *fe, const fe_sec_voltage_t v) { struct mt312_state *state = fe->demodulator_priv; const u8 volt_tab[3] = { 0x00, 0x40, 0x00 }; @@ -365,7 +372,7 @@ static int mt312_set_voltage(struct dvb_frontend* fe, const fe_sec_voltage_t v) return mt312_writereg(state, DISEQC_MODE, volt_tab[v]); } -static int mt312_read_status(struct dvb_frontend* fe, fe_status_t *s) +static int mt312_read_status(struct dvb_frontend *fe, fe_status_t *s) { struct mt312_state *state = fe->demodulator_priv; int ret; @@ -376,7 +383,8 @@ static int mt312_read_status(struct dvb_frontend* fe, fe_status_t *s) if ((ret = mt312_read(state, QPSK_STAT_H, status, sizeof(status))) < 0) return ret; - dprintk(KERN_DEBUG "QPSK_STAT_H: 0x%02x, QPSK_STAT_L: 0x%02x, FEC_STATUS: 0x%02x\n", status[0], status[1], status[2]); + dprintk(KERN_DEBUG "QPSK_STAT_H: 0x%02x, QPSK_STAT_L: 0x%02x," + " FEC_STATUS: 0x%02x\n", status[0], status[1], status[2]); if (status[0] & 0xc0) *s |= FE_HAS_SIGNAL; /* signal noise ratio */ @@ -392,7 +400,7 @@ static int mt312_read_status(struct dvb_frontend* fe, fe_status_t *s) return 0; } -static int mt312_read_ber(struct dvb_frontend* fe, u32 *ber) +static int mt312_read_ber(struct dvb_frontend *fe, u32 *ber) { struct mt312_state *state = fe->demodulator_priv; int ret; @@ -406,7 +414,8 @@ static int mt312_read_ber(struct dvb_frontend* fe, u32 *ber) return 0; } -static int mt312_read_signal_strength(struct dvb_frontend* fe, u16 *signal_strength) +static int mt312_read_signal_strength(struct dvb_frontend *fe, + u16 *signal_strength) { struct mt312_state *state = fe->demodulator_priv; int ret; @@ -427,7 +436,7 @@ static int mt312_read_signal_strength(struct dvb_frontend* fe, u16 *signal_stren return 0; } -static int mt312_read_snr(struct dvb_frontend* fe, u16 *snr) +static int mt312_read_snr(struct dvb_frontend *fe, u16 *snr) { struct mt312_state *state = fe->demodulator_priv; int ret; @@ -441,7 +450,7 @@ static int mt312_read_snr(struct dvb_frontend* fe, u16 *snr) return 0; } -static int mt312_read_ucblocks(struct dvb_frontend* fe, u32 *ubc) +static int mt312_read_ucblocks(struct dvb_frontend *fe, u32 *ubc) { struct mt312_state *state = fe->demodulator_priv; int ret; @@ -455,7 +464,7 @@ static int mt312_read_ucblocks(struct dvb_frontend* fe, u32 *ubc) return 0; } -static int mt312_set_frontend(struct dvb_frontend* fe, +static int mt312_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) { struct mt312_state *state = fe->demodulator_priv; @@ -491,22 +500,24 @@ static int mt312_set_frontend(struct dvb_frontend* fe, switch (state->id) { case ID_VP310: - // For now we will do this only for the VP310. - // It should be better for the mt312 as well, but tunning will be slower. ACCJr 09/29/03 + /* For now we will do this only for the VP310. + * It should be better for the mt312 as well, + * but tuning will be slower. ACCJr 09/29/03 + */ ret = mt312_readreg(state, CONFIG, &config_val); if (ret < 0) return ret; - if (p->u.qpsk.symbol_rate >= 30000000) //Note that 30MS/s should use 90MHz - { - if ((config_val & 0x0c) == 0x08) { //We are running 60MHz + if (p->u.qpsk.symbol_rate >= 30000000) { + /* Note that 30MS/s should use 90MHz */ + if ((config_val & 0x0c) == 0x08) { + /* We are running 60MHz */ state->frequency = 90; if ((ret = mt312_initfe(fe)) < 0) return ret; } - } - else - { - if ((config_val & 0x0c) == 0x0C) { //We are running 90MHz + } else { + if ((config_val & 0x0c) == 0x0C) { + /* We are running 90MHz */ state->frequency = 60; if ((ret = mt312_initfe(fe)) < 0) return ret; @@ -523,7 +534,8 @@ static int mt312_set_frontend(struct dvb_frontend* fe, if (fe->ops.tuner_ops.set_params) { fe->ops.tuner_ops.set_params(fe, p); - if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); } /* sr = (u16)(sr * 256.0 / 1000000.0) */ @@ -553,7 +565,7 @@ static int mt312_set_frontend(struct dvb_frontend* fe, return 0; } -static int mt312_get_frontend(struct dvb_frontend* fe, +static int mt312_get_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) { struct mt312_state *state = fe->demodulator_priv; @@ -571,9 +583,9 @@ static int mt312_get_frontend(struct dvb_frontend* fe, return 0; } -static int mt312_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) +static int mt312_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) { - struct mt312_state* state = fe->demodulator_priv; + struct mt312_state *state = fe->demodulator_priv; if (enable) { return mt312_writereg(state, GPP_CTRL, 0x40); @@ -582,7 +594,7 @@ static int mt312_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) } } -static int mt312_sleep(struct dvb_frontend* fe) +static int mt312_sleep(struct dvb_frontend *fe) { struct mt312_state *state = fe->demodulator_priv; int ret; @@ -602,7 +614,8 @@ static int mt312_sleep(struct dvb_frontend* fe) return 0; } -static int mt312_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings) +static int mt312_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *fesettings) { fesettings->min_delay_ms = 50; fesettings->step_size = 0; @@ -610,9 +623,9 @@ static int mt312_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_ return 0; } -static void mt312_release(struct dvb_frontend* fe) +static void mt312_release(struct dvb_frontend *fe) { - struct mt312_state* state = fe->demodulator_priv; + struct mt312_state *state = fe->demodulator_priv; kfree(state); } @@ -655,10 +668,10 @@ static struct dvb_frontend_ops vp310_mt312_ops = { .set_voltage = mt312_set_voltage, }; -struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config, - struct i2c_adapter* i2c) +struct dvb_frontend *vp310_mt312_attach(const struct mt312_config *config, + struct i2c_adapter *i2c) { - struct mt312_state* state = NULL; + struct mt312_state *state = NULL; /* allocate memory for the internal state */ state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL); @@ -674,7 +687,8 @@ struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config, goto error; /* create dvb_frontend */ - memcpy(&state->frontend.ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops)); + memcpy(&state->frontend.ops, &vp310_mt312_ops, + sizeof(struct dvb_frontend_ops)); state->frontend.demodulator_priv = state; switch (state->id) { @@ -687,7 +701,8 @@ struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config, state->frequency = 60; break; default: - printk (KERN_WARNING "Only Zarlink VP310/MT312 are supported chips.\n"); + printk(KERN_WARNING "Only Zarlink VP310/MT312" + " are supported chips.\n"); goto error; } @@ -697,6 +712,7 @@ error: kfree(state); return NULL; } +EXPORT_SYMBOL(vp310_mt312_attach); module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); @@ -705,4 +721,3 @@ MODULE_DESCRIPTION("Zarlink VP310/MT312 DVB-S Demodulator driver"); MODULE_AUTHOR("Andreas Oberritter "); MODULE_LICENSE("GPL"); -EXPORT_SYMBOL(vp310_mt312_attach); diff --git a/drivers/media/dvb/frontends/mt312.h b/drivers/media/dvb/frontends/mt312.h index cf9a1505ad4b..f17cb93ba9ba 100644 --- a/drivers/media/dvb/frontends/mt312.h +++ b/drivers/media/dvb/frontends/mt312.h @@ -28,22 +28,21 @@ #include -struct mt312_config -{ +struct mt312_config { /* the demodulator's i2c address */ u8 demod_address; }; #if defined(CONFIG_DVB_MT312) || (defined(CONFIG_DVB_MT312_MODULE) && defined(MODULE)) -struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config, - struct i2c_adapter* i2c); +struct dvb_frontend *vp310_mt312_attach(const struct mt312_config *config, + struct i2c_adapter *i2c); #else -static inline struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config, - struct i2c_adapter* i2c) +static inline struct dvb_frontend *vp310_mt312_attach( + const struct mt312_config *config, struct i2c_adapter *i2c) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); return NULL; } -#endif // CONFIG_DVB_MT312 +#endif /* CONFIG_DVB_MT312 */ -#endif // MT312_H +#endif /* MT312_H */ -- cgit v1.2.3-59-g8ed1b From 0b6a3342a645208feaab76332f1eee33e1688bd5 Mon Sep 17 00:00:00 2001 From: Matthias Schwarzott Date: Fri, 21 Dec 2007 08:58:09 -0300 Subject: V4L/DVB (6874): removes duplicated KERN_DEBUG flags from dprintk calls in mt312.c do { \ if (debug) printk(KERN_DEBUG "mt312: " args); \ } while (0) So no caller need to specify KERN_DEBUG. Signed-off-by: Matthias Schwarzott Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/mt312.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c index 55d42440e979..2d68fafc0ef8 100644 --- a/drivers/media/dvb/frontends/mt312.c +++ b/drivers/media/dvb/frontends/mt312.c @@ -183,7 +183,7 @@ static int mt312_get_symbol_rate(struct mt312_state *state, u32 *sr) monitor = (buf[0] << 8) | buf[1]; - dprintk(KERN_DEBUG "sr(auto) = %u\n", + dprintk("sr(auto) = %u\n", mt312_div(monitor * 15625, 4)); } else { if ((ret = mt312_writereg(state, MON_CTRL, 0x05)) < 0) @@ -200,9 +200,9 @@ static int mt312_get_symbol_rate(struct mt312_state *state, u32 *sr) sym_rat_op = (buf[0] << 8) | buf[1]; - dprintk(KERN_DEBUG "sym_rat_op=%d dec_ratio=%d\n", + dprintk("sym_rat_op=%d dec_ratio=%d\n", sym_rat_op, dec_ratio); - dprintk(KERN_DEBUG "*sr(manual) = %lu\n", + dprintk("*sr(manual) = %lu\n", (((MT312_PLL_CLK * 8192) / (sym_rat_op + 8192)) * 2) - dec_ratio); } @@ -383,7 +383,7 @@ static int mt312_read_status(struct dvb_frontend *fe, fe_status_t *s) if ((ret = mt312_read(state, QPSK_STAT_H, status, sizeof(status))) < 0) return ret; - dprintk(KERN_DEBUG "QPSK_STAT_H: 0x%02x, QPSK_STAT_L: 0x%02x," + dprintk("QPSK_STAT_H: 0x%02x, QPSK_STAT_L: 0x%02x," " FEC_STATUS: 0x%02x\n", status[0], status[1], status[2]); if (status[0] & 0xc0) @@ -431,7 +431,7 @@ static int mt312_read_signal_strength(struct dvb_frontend *fe, *signal_strength = agc; - dprintk(KERN_DEBUG "agc=%08x err_db=%hd\n", agc, err_db); + dprintk("agc=%08x err_db=%hd\n", agc, err_db); return 0; } -- cgit v1.2.3-59-g8ed1b From d536c9df41f5e47a37e22b46ea98451ce8134e55 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Tue, 18 Dec 2007 10:42:33 -0300 Subject: V4L/DVB (6875): tuner-xc2028: ATSC requires 1.75 MHz tuning offset In my testing yesterday, I was using a scan file tailored specifically for a unique test situation -- As it turns out, this scan file was bad, and I will use the one included inside dvb-apps for testing for now on. I've tested with other ATSC tuners just to confirm, using: us-ATSC-center-frequencies-8VSB Anyhow, as it turns out, the tuner-xc2028 *does* require a tuning offset for ATSC. Even though the linux-dvb api passes in center frequencies from userspace, apparantly the xceive firmware is already factoring in the tuning offset to center. In order to make the device function using the same scan files / channels.conf configurations as other atsc devices, we must offset by 1.75 MHz. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-xc2028.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/tuner-xc2028.c b/drivers/media/video/tuner-xc2028.c index d367f205c98a..5ed12e2272e9 100644 --- a/drivers/media/video/tuner-xc2028.c +++ b/drivers/media/video/tuner-xc2028.c @@ -873,7 +873,9 @@ static int generic_set_freq(struct dvb_frontend *fe, u32 freq /* in HZ */, */ if (new_mode == T_ANALOG_TV) { rc = send_seq(priv, {0x00, 0x00}); - } else if (!(priv->cur_fw.type & ATSC)) { + } else if (priv->cur_fw.type & ATSC) { + offset = 1750000; + } else { offset = 2750000; /* * We must adjust the offset by 500kHz in two cases in order -- cgit v1.2.3-59-g8ed1b From b624aa86cd92b32d66653609e4896f54c0d6111d Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Thu, 20 Dec 2007 23:19:14 -0300 Subject: V4L/DVB (6878): tuner: remove extraneous variable declaration tuner_count is already declared as "extern unsigned const int" in -- Remove it from tuner-driver.h Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-driver.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/media/video/tuner-driver.h b/drivers/media/video/tuner-driver.h index 5eaa30ccbda3..999ad7715a01 100644 --- a/drivers/media/video/tuner-driver.h +++ b/drivers/media/video/tuner-driver.h @@ -24,8 +24,6 @@ #include "dvb_frontend.h" -extern unsigned const int tuner_count; - struct analog_demod_info { char *name; }; -- cgit v1.2.3-59-g8ed1b From 807ffe8df23e1977d4e702697a08047f346eb974 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Fri, 21 Dec 2007 02:55:43 -0300 Subject: V4L/DVB (6879): move struct analog_tuner_ops into dvb_frontend.h struct analog_tuner_ops no longer has any dependencies specific to v4l2, so we can move this into dvb_frontend.h with the rest of the tuning structures. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-core/dvb_frontend.h | 24 ++++++++++++++++++++++-- drivers/media/video/tuner-driver.h | 22 ---------------------- 2 files changed, 22 insertions(+), 24 deletions(-) diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h index 50dc5568efaa..417802f83f7e 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.h +++ b/drivers/media/dvb/dvb-core/dvb_frontend.h @@ -62,8 +62,6 @@ struct dvb_tuner_info { u32 bandwidth_step; }; -struct analog_tuner_ops; - struct analog_parameters { unsigned int frequency; unsigned int mode; @@ -103,6 +101,28 @@ struct dvb_tuner_ops { int (*set_bandwidth)(struct dvb_frontend *fe, u32 bandwidth); }; +struct analog_demod_info { + char *name; +}; + +struct analog_tuner_ops { + + struct analog_demod_info info; + + void (*set_params)(struct dvb_frontend *fe, + struct analog_parameters *params); + int (*has_signal)(struct dvb_frontend *fe); + int (*is_stereo)(struct dvb_frontend *fe); + int (*get_afc)(struct dvb_frontend *fe); + void (*tuner_status)(struct dvb_frontend *fe); + void (*standby)(struct dvb_frontend *fe); + void (*release)(struct dvb_frontend *fe); + int (*i2c_gate_ctrl)(struct dvb_frontend *fe, int enable); + + /** This is to allow setting tuner-specific configuration */ + int (*set_config)(struct dvb_frontend *fe, void *priv_cfg); +}; + struct dvb_frontend_ops { struct dvb_frontend_info info; diff --git a/drivers/media/video/tuner-driver.h b/drivers/media/video/tuner-driver.h index 999ad7715a01..79efecc93340 100644 --- a/drivers/media/video/tuner-driver.h +++ b/drivers/media/video/tuner-driver.h @@ -24,26 +24,4 @@ #include "dvb_frontend.h" -struct analog_demod_info { - char *name; -}; - -struct analog_tuner_ops { - - struct analog_demod_info info; - - void (*set_params)(struct dvb_frontend *fe, - struct analog_parameters *params); - int (*has_signal)(struct dvb_frontend *fe); - int (*is_stereo)(struct dvb_frontend *fe); - int (*get_afc)(struct dvb_frontend *fe); - void (*tuner_status)(struct dvb_frontend *fe); - void (*standby)(struct dvb_frontend *fe); - void (*release)(struct dvb_frontend *fe); - int (*i2c_gate_ctrl)(struct dvb_frontend *fe, int enable); - - /** This is to allow setting tuner-specific configuration */ - int (*set_config)(struct dvb_frontend *fe, void *priv_cfg); -}; - #endif /* __TUNER_DRIVER_H__ */ -- cgit v1.2.3-59-g8ed1b From 9ad89f0104314786138d580ab2c1119e7e470f56 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Fri, 21 Dec 2007 03:00:59 -0300 Subject: V4L/DVB (6880): kill tuner-driver.h Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 1 - drivers/media/video/tda8290.c | 1 - drivers/media/video/tda9887.c | 1 - drivers/media/video/tuner-core.c | 1 - drivers/media/video/tuner-driver.h | 27 --------------------------- 5 files changed, 31 deletions(-) delete mode 100644 drivers/media/video/tuner-driver.h diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index 28c63fd4493e..406520f6310c 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -20,7 +20,6 @@ #include #include -#include "tuner-driver.h" #include "tda18271.h" #include "tda18271-priv.h" diff --git a/drivers/media/video/tda8290.c b/drivers/media/video/tda8290.c index a451d9480c1d..71d38ba37f2e 100644 --- a/drivers/media/video/tda8290.c +++ b/drivers/media/video/tda8290.c @@ -23,7 +23,6 @@ #include #include #include -#include "tuner-driver.h" #include "tuner-i2c.h" #include "tda8290.h" #include "tda827x.h" diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c index 2abb76fba9a7..1b017d52bfb5 100644 --- a/drivers/media/video/tda9887.c +++ b/drivers/media/video/tda9887.c @@ -9,7 +9,6 @@ #include #include #include -#include "tuner-driver.h" #include "tuner-i2c.h" #include "tda9887.h" diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index f22c41bb97ef..ad20af84809d 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -20,7 +20,6 @@ #include #include #include -#include "tuner-driver.h" #include "mt20xx.h" #include "tda8290.h" #include "tea5761.h" diff --git a/drivers/media/video/tuner-driver.h b/drivers/media/video/tuner-driver.h deleted file mode 100644 index 79efecc93340..000000000000 --- a/drivers/media/video/tuner-driver.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - tuner-driver.h - interface for different tuners - - Copyright (C) 1997 Markus Schroeder (schroedm@uni-duesseldorf.de) - minor modifications by Ralph Metzler (rjkm@thp.uni-koeln.de) - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#ifndef __TUNER_DRIVER_H__ -#define __TUNER_DRIVER_H__ - -#include "dvb_frontend.h" - -#endif /* __TUNER_DRIVER_H__ */ -- cgit v1.2.3-59-g8ed1b From bc3e5c7fc20d3c09667067878fb7a55dd9fc041d Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Fri, 21 Dec 2007 11:18:32 -0300 Subject: V4L/DVB (6881): include struct analog_demod_ops directly inside struct dvb_frontend Rather than using a pointer, include struct analog_demod_ops directly inside struct dvb_frontend. This will allow us to use dvb_attach in the future, along with removing the need to check the ops structure before having to check the pointer to the method being called. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-core/dvb_frontend.h | 4 +- drivers/media/dvb/frontends/tda18271-fe.c | 5 +- drivers/media/video/tda8290.c | 23 +++---- drivers/media/video/tda9887.c | 5 +- drivers/media/video/tuner-core.c | 99 +++++++++++++++---------------- 5 files changed, 66 insertions(+), 70 deletions(-) diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h index 417802f83f7e..aa4133f0bd19 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.h +++ b/drivers/media/dvb/dvb-core/dvb_frontend.h @@ -105,7 +105,7 @@ struct analog_demod_info { char *name; }; -struct analog_tuner_ops { +struct analog_demod_ops { struct analog_demod_info info; @@ -168,7 +168,7 @@ struct dvb_frontend_ops { int (*ts_bus_ctrl)(struct dvb_frontend* fe, int acquire); struct dvb_tuner_ops tuner_ops; - struct analog_tuner_ops *analog_demod_ops; + struct analog_demod_ops analog_ops; }; #define MAX_EVENT 8 diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index 406520f6310c..3c0f06e1f47d 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -50,7 +50,6 @@ struct tda18271_priv { static int tda18271_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) { struct tda18271_priv *priv = fe->tuner_priv; - struct analog_tuner_ops *ops = fe->ops.analog_demod_ops; enum tda18271_i2c_gate gate; int ret = 0; @@ -74,8 +73,8 @@ static int tda18271_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) switch (gate) { case TDA18271_GATE_ANALOG: - if (ops && ops->i2c_gate_ctrl) - ret = ops->i2c_gate_ctrl(fe, enable); + if (fe->ops.analog_ops.i2c_gate_ctrl) + ret = fe->ops.analog_ops.i2c_gate_ctrl(fe, enable); break; case TDA18271_GATE_DIGITAL: if (fe->ops.i2c_gate_ctrl) diff --git a/drivers/media/video/tda8290.c b/drivers/media/video/tda8290.c index 71d38ba37f2e..2e1d9b663a91 100644 --- a/drivers/media/video/tda8290.c +++ b/drivers/media/video/tda8290.c @@ -512,16 +512,16 @@ static void tda829x_release(struct dvb_frontend *fe) static int tda829x_find_tuner(struct dvb_frontend *fe) { struct tda8290_priv *priv = fe->analog_demod_priv; - struct analog_tuner_ops *ops = fe->ops.analog_demod_ops; + struct analog_demod_ops *analog_ops = &fe->ops.analog_ops; int i, ret, tuners_found; u32 tuner_addrs; u8 data; struct i2c_msg msg = { .flags = I2C_M_RD, .buf = &data, .len = 1 }; - if (NULL == ops) + if (NULL == analog_ops->i2c_gate_ctrl) return -EINVAL; - ops->i2c_gate_ctrl(fe, 1); + analog_ops->i2c_gate_ctrl(fe, 1); /* probe for tuner chip */ tuners_found = 0; @@ -539,7 +539,7 @@ static int tda829x_find_tuner(struct dvb_frontend *fe) give a response now */ - ops->i2c_gate_ctrl(fe, 0); + analog_ops->i2c_gate_ctrl(fe, 0); if (tuners_found > 1) for (i = 0; i < tuners_found; i++) { @@ -562,7 +562,7 @@ static int tda829x_find_tuner(struct dvb_frontend *fe) priv->tda827x_addr = tuner_addrs; msg.addr = tuner_addrs; - ops->i2c_gate_ctrl(fe, 1); + analog_ops->i2c_gate_ctrl(fe, 1); ret = i2c_transfer(priv->i2c_props.adap, &msg, 1); if (ret != 1) { @@ -590,7 +590,7 @@ static int tda829x_find_tuner(struct dvb_frontend *fe) if (fe->ops.tuner_ops.sleep) fe->ops.tuner_ops.sleep(fe); - ops->i2c_gate_ctrl(fe, 0); + analog_ops->i2c_gate_ctrl(fe, 0); return 0; } @@ -635,7 +635,7 @@ static int tda8295_probe(struct tuner_i2c_props *i2c_props) return -ENODEV; } -static struct analog_tuner_ops tda8290_tuner_ops = { +static struct analog_demod_ops tda8290_ops = { .info = { .name = "TDA8290", }, @@ -646,7 +646,7 @@ static struct analog_tuner_ops tda8290_tuner_ops = { .i2c_gate_ctrl = tda8290_i2c_bridge, }; -static struct analog_tuner_ops tda8295_tuner_ops = { +static struct analog_demod_ops tda8295_ops = { .info = { .name = "TDA8295", }, @@ -678,12 +678,14 @@ struct dvb_frontend *tda829x_attach(struct dvb_frontend *fe, if (tda8290_probe(&priv->i2c_props) == 0) { priv->ver = TDA8290; - fe->ops.analog_demod_ops = &tda8290_tuner_ops; + memcpy(&fe->ops.analog_ops, &tda8290_ops, + sizeof(struct analog_demod_ops)); } if (tda8295_probe(&priv->i2c_props) == 0) { priv->ver = TDA8295; - fe->ops.analog_demod_ops = &tda8295_tuner_ops; + memcpy(&fe->ops.analog_ops, &tda8295_ops, + sizeof(struct analog_demod_ops)); } if (tda829x_find_tuner(fe) < 0) @@ -723,7 +725,6 @@ struct dvb_frontend *tda829x_attach(struct dvb_frontend *fe, fail: tda829x_release(fe); - fe->ops.analog_demod_ops = NULL; return NULL; } EXPORT_SYMBOL_GPL(tda829x_attach); diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c index 1b017d52bfb5..d3aabe2d146b 100644 --- a/drivers/media/video/tda9887.c +++ b/drivers/media/video/tda9887.c @@ -648,7 +648,7 @@ static void tda9887_release(struct dvb_frontend *fe) fe->analog_demod_priv = NULL; } -static struct analog_tuner_ops tda9887_tuner_ops = { +static struct analog_demod_ops tda9887_ops = { .info = { .name = "TDA9887", }, @@ -677,7 +677,8 @@ struct dvb_frontend *tda9887_attach(struct dvb_frontend *fe, tuner_info("tda988[5/6/7] found\n"); - fe->ops.analog_demod_ops = &tda9887_tuner_ops; + memcpy(&fe->ops.analog_ops, &tda9887_ops, + sizeof(struct analog_demod_ops)); return fe; } diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index ad20af84809d..f792871582ff 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -143,8 +143,6 @@ static void fe_release(struct dvb_frontend *fe) if (fe->ops.tuner_ops.release) fe->ops.tuner_ops.release(fe); - fe->ops.analog_demod_ops = NULL; - /* DO NOT kfree(fe->analog_demod_priv) * * If we are in this function, analog_demod_priv contains a pointer @@ -189,7 +187,7 @@ static int fe_set_config(struct dvb_frontend *fe, void *priv_cfg) static void tuner_status(struct dvb_frontend *fe); -static struct analog_tuner_ops tuner_core_ops = { +static struct analog_demod_ops tuner_core_ops = { .set_params = fe_set_params, .standby = fe_standby, .release = fe_release, @@ -202,7 +200,7 @@ static struct analog_tuner_ops tuner_core_ops = { static void set_tv_freq(struct i2c_client *c, unsigned int freq) { struct tuner *t = i2c_get_clientdata(c); - struct analog_tuner_ops *ops = t->fe.ops.analog_demod_ops; + struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; struct analog_parameters params = { .mode = t->mode, @@ -214,7 +212,7 @@ static void set_tv_freq(struct i2c_client *c, unsigned int freq) tuner_warn ("tuner type not set\n"); return; } - if ((NULL == ops) || (NULL == ops->set_params)) { + if (NULL == analog_ops->set_params) { tuner_warn ("Tuner has no way to set tv freq\n"); return; } @@ -231,13 +229,13 @@ static void set_tv_freq(struct i2c_client *c, unsigned int freq) } params.frequency = freq; - ops->set_params(&t->fe, ¶ms); + analog_ops->set_params(&t->fe, ¶ms); } static void set_radio_freq(struct i2c_client *c, unsigned int freq) { struct tuner *t = i2c_get_clientdata(c); - struct analog_tuner_ops *ops = t->fe.ops.analog_demod_ops; + struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; struct analog_parameters params = { .mode = t->mode, @@ -249,7 +247,7 @@ static void set_radio_freq(struct i2c_client *c, unsigned int freq) tuner_warn ("tuner type not set\n"); return; } - if ((NULL == ops) || (NULL == ops->set_params)) { + if (analog_ops->set_params) { tuner_warn ("tuner has no way to set radio frequency\n"); return; } @@ -266,7 +264,7 @@ static void set_radio_freq(struct i2c_client *c, unsigned int freq) } params.frequency = freq; - ops->set_params(&t->fe, ¶ms); + analog_ops->set_params(&t->fe, ¶ms); } static void set_freq(struct i2c_client *c, unsigned long freq) @@ -337,7 +335,7 @@ static void set_type(struct i2c_client *c, unsigned int type, { struct tuner *t = i2c_get_clientdata(c); struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops; - struct analog_tuner_ops *ops = t->fe.ops.analog_demod_ops; + struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; unsigned char buffer[4]; if (type == UNSET || type == TUNER_ABSENT) { @@ -364,8 +362,8 @@ static void set_type(struct i2c_client *c, unsigned int type, } /* discard private data, in case set_type() was previously called */ - if (ops && ops->release) - ops->release(&t->fe); + if (analog_ops->release) + analog_ops->release(&t->fe); switch (t->type) { case TUNER_MT2032: @@ -435,17 +433,16 @@ static void set_type(struct i2c_client *c, unsigned int type, break; } - ops = t->fe.ops.analog_demod_ops; - - if (((NULL == ops) || (NULL == ops->set_params)) && + if ((NULL == analog_ops->set_params) && (fe_tuner_ops->set_analog_params)) { strlcpy(t->i2c->name, fe_tuner_ops->info.name, sizeof(t->i2c->name)); - t->fe.ops.analog_demod_ops = &tuner_core_ops; t->fe.analog_demod_priv = t; + memcpy(analog_ops, &tuner_core_ops, + sizeof(struct analog_demod_ops)); } else { - strlcpy(t->i2c->name, ops->info.name, + strlcpy(t->i2c->name, analog_ops->info.name, sizeof(t->i2c->name)); } @@ -624,7 +621,7 @@ static void tuner_status(struct dvb_frontend *fe) struct tuner *t = fe->analog_demod_priv; unsigned long freq, freq_fraction; struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops; - struct analog_tuner_ops *ops = t->fe.ops.analog_demod_ops; + struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; const char *p; switch (t->mode) { @@ -654,14 +651,12 @@ static void tuner_status(struct dvb_frontend *fe) if (tuner_status & TUNER_STATUS_STEREO) tuner_info("Stereo: yes\n"); } - if (ops) { - if (ops->has_signal) - tuner_info("Signal strength: %d\n", - ops->has_signal(fe)); - if (ops->is_stereo) - tuner_info("Stereo: %s\n", - ops->is_stereo(fe) ? "yes" : "no"); - } + if (analog_ops->has_signal) + tuner_info("Signal strength: %d\n", + analog_ops->has_signal(fe)); + if (analog_ops->is_stereo) + tuner_info("Stereo: %s\n", + analog_ops->is_stereo(fe) ? "yes" : "no"); } /* ---------------------------------------------------------------------- */ @@ -675,7 +670,7 @@ static void tuner_status(struct dvb_frontend *fe) static inline int set_mode(struct i2c_client *client, struct tuner *t, int mode, char *cmd) { - struct analog_tuner_ops *ops = t->fe.ops.analog_demod_ops; + struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; if (mode == t->mode) return 0; @@ -684,8 +679,8 @@ static inline int set_mode(struct i2c_client *client, struct tuner *t, int mode, if (check_mode(t, cmd) == EINVAL) { t->mode = T_STANDBY; - if (ops && ops->standby) - ops->standby(&t->fe); + if (analog_ops->standby) + analog_ops->standby(&t->fe); return EINVAL; } return 0; @@ -708,7 +703,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct tuner *t = i2c_get_clientdata(client); struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops; - struct analog_tuner_ops *ops = t->fe.ops.analog_demod_ops; + struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; if (tuner_debug>1) v4l_i2c_print_ioctl(client,cmd); @@ -735,8 +730,8 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) if (check_mode(t, "TUNER_SET_STANDBY") == EINVAL) return 0; t->mode = T_STANDBY; - if (ops && ops->standby) - ops->standby(&t->fe); + if (analog_ops->standby) + analog_ops->standby(&t->fe); break; #ifdef CONFIG_VIDEO_V4L1 case VIDIOCSAUDIO: @@ -804,8 +799,8 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) else vt->flags &= ~VIDEO_TUNER_STEREO_ON; } else { - if (ops && ops->is_stereo) { - if (ops->is_stereo(&t->fe)) + if (analog_ops->is_stereo) { + if (analog_ops->is_stereo(&t->fe)) vt->flags |= VIDEO_TUNER_STEREO_ON; else @@ -813,8 +808,9 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) ~VIDEO_TUNER_STEREO_ON; } } - if (ops && ops->has_signal) - vt->signal = ops->has_signal(&t->fe); + if (analog_ops->has_signal) + vt->signal = + analog_ops->has_signal(&t->fe); vt->flags |= VIDEO_TUNER_LOW; /* Allow freqs at 62.5 Hz */ @@ -844,8 +840,8 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) fe_tuner_ops->get_status(&t->fe, &tuner_status); va->mode = (tuner_status & TUNER_STATUS_STEREO) ? VIDEO_SOUND_STEREO : VIDEO_SOUND_MONO; - } else if (ops && ops->is_stereo) - va->mode = ops->is_stereo(&t->fe) + } else if (analog_ops->is_stereo) + va->mode = analog_ops->is_stereo(&t->fe) ? VIDEO_SOUND_STEREO : VIDEO_SOUND_MONO; } return 0; @@ -853,19 +849,18 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) #endif case TUNER_SET_CONFIG: { - struct analog_tuner_ops *ops = t->fe.ops.analog_demod_ops; struct v4l2_priv_tun_config *cfg = arg; if (t->type != cfg->tuner) break; - if ((NULL == ops) || (NULL == ops->set_config)) { + if (analog_ops->set_config) { tuner_warn("Tuner frontend module has no way to " "set config\n"); break; } - ops->set_config(&t->fe, cfg->priv); + analog_ops->set_config(&t->fe, cfg->priv); break; } /* --- v4l ioctls --- */ @@ -929,8 +924,8 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) switch_v4l2(); tuner->type = t->mode; - if (ops && ops->get_afc) - tuner->afc = ops->get_afc(&t->fe); + if (analog_ops->get_afc) + tuner->afc = analog_ops->get_afc(&t->fe); if (t->mode == V4L2_TUNER_ANALOG_TV) tuner->capability |= V4L2_TUNER_CAP_NORM; if (t->mode != V4L2_TUNER_RADIO) { @@ -951,15 +946,15 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO; } else { - if (ops && ops->is_stereo) { + if (analog_ops->is_stereo) { tuner->rxsubchans = - ops->is_stereo(&t->fe) ? + analog_ops->is_stereo(&t->fe) ? V4L2_TUNER_SUB_STEREO : V4L2_TUNER_SUB_MONO; } } - if (ops && ops->has_signal) - tuner->signal = ops->has_signal(&t->fe); + if (analog_ops->has_signal) + tuner->signal = analog_ops->has_signal(&t->fe); tuner->capability |= V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO; tuner->audmode = t->audmode; @@ -984,8 +979,8 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) break; } case VIDIOC_LOG_STATUS: - if (ops && ops->tuner_status) - ops->tuner_status(&t->fe); + if (analog_ops->tuner_status) + analog_ops->tuner_status(&t->fe); break; } @@ -1214,10 +1209,10 @@ static int tuner_legacy_probe(struct i2c_adapter *adap) static int tuner_remove(struct i2c_client *client) { struct tuner *t = i2c_get_clientdata(client); - struct analog_tuner_ops *ops = t->fe.ops.analog_demod_ops; + struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; - if (ops && ops->release) - ops->release(&t->fe); + if (analog_ops->release) + analog_ops->release(&t->fe); list_del(&t->list); kfree(t); -- cgit v1.2.3-59-g8ed1b From 2426a27e4d25cf932ce73aa84a085ee94b4189a8 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Fri, 21 Dec 2007 11:34:45 -0300 Subject: V4L/DVB (6882): dvb_frontend: release analog demod in dvb_frontend_detach Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-core/dvb_frontend.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 445f02665577..925cfa6221ad 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -1202,6 +1202,10 @@ void dvb_frontend_detach(struct dvb_frontend* fe) fe->ops.tuner_ops.release(fe); symbol_put_addr(fe->ops.tuner_ops.release); } + if (fe->ops.analog_ops.release) { + fe->ops.analog_ops.release(fe); + symbol_put_addr(fe->ops.analog_ops.release); + } ptr = (void*)fe->ops.release; if (ptr) { fe->ops.release(fe); @@ -1215,6 +1219,8 @@ void dvb_frontend_detach(struct dvb_frontend* fe) fe->ops.release_sec(fe); if (fe->ops.tuner_ops.release) fe->ops.tuner_ops.release(fe); + if (fe->ops.analog_ops.release) + fe->ops.analog_ops.release(fe); if (fe->ops.release) fe->ops.release(fe); } -- cgit v1.2.3-59-g8ed1b From aacb9d31ee65c0685745ca4dfc7cdd24f8b7d92b Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Tue, 18 Dec 2007 01:55:51 -0300 Subject: V4L/DVB (6884): Add support for the Xceive xc5000 silicon tuner This is an all formats tuner, QAM, ATSC, DVB-T and others. Only ATSC and QAM have been tested. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/Kconfig | 9 + drivers/media/dvb/frontends/Makefile | 1 + drivers/media/dvb/frontends/xc5000.c | 802 ++++++++++++++++++++++++++++++ drivers/media/dvb/frontends/xc5000.h | 51 ++ drivers/media/dvb/frontends/xc5000_priv.h | 37 ++ 5 files changed, 900 insertions(+) create mode 100644 drivers/media/dvb/frontends/xc5000.c create mode 100644 drivers/media/dvb/frontends/xc5000.h create mode 100644 drivers/media/dvb/frontends/xc5000_priv.h diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index 57178d6e1cf8..9ad86ce4a4e5 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -360,6 +360,15 @@ config DVB_TUNER_DIB0070 This device is only used inside a SiP called togther with a demodulator for now. +config DVB_TUNER_XC5000 + tristate "Xceive XC5000 silicon tuner" + depends on I2C + default m if DVB_FE_CUSTOMISE + help + A driver for the silicon tuner XC5000 from Xceive. + This device is only used inside a SiP called togther with a + demodulator for now. + comment "Miscellaneous devices" depends on DVB_CORE diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index 784565208fb4..1c082a6a9499 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -50,3 +50,4 @@ obj-$(CONFIG_DVB_TUNER_QT1010) += qt1010.o obj-$(CONFIG_DVB_TUA6100) += tua6100.o obj-$(CONFIG_DVB_TUNER_MT2131) += mt2131.o obj-$(CONFIG_DVB_S5H1409) += s5h1409.o +obj-$(CONFIG_DVB_TUNER_XC5000) += xc5000.o diff --git a/drivers/media/dvb/frontends/xc5000.c b/drivers/media/dvb/frontends/xc5000.c new file mode 100644 index 000000000000..048f9a79b915 --- /dev/null +++ b/drivers/media/dvb/frontends/xc5000.c @@ -0,0 +1,802 @@ +/* + * Driver for Xceive XC5000 "QAM/8VSB single chip tuner" + * + * Copyright (c) 2007 Xceive Corporation + * Copyright (c) 2007 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +#include "dvb_frontend.h" + +#include "xc5000.h" +#include "xc5000_priv.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); + +#define dprintk(level,fmt, arg...) if (debug >= level) \ + printk(KERN_INFO "%s: " fmt, "xc5000", ## arg) + +#define XC5000_DEFAULT_FIRMWARE "dvb-fe-xc5000-1.1.fw" +#define XC5000_DEFAULT_FIRMWARE_SIZE 12400 + +/* Misc Defines */ +#define MAX_TV_STANDARD 23 +#define XC_MAX_I2C_WRITE_LENGTH 64 + +/* Signal Types */ +#define XC_RF_MODE_AIR 0 +#define XC_RF_MODE_CABLE 1 + +/* Result codes */ +#define XC_RESULT_SUCCESS 0 +#define XC_RESULT_RESET_FAILURE 1 +#define XC_RESULT_I2C_WRITE_FAILURE 2 +#define XC_RESULT_I2C_READ_FAILURE 3 +#define XC_RESULT_OUT_OF_RANGE 5 + +/* Registers */ +#define XREG_INIT 0x00 +#define XREG_VIDEO_MODE 0x01 +#define XREG_AUDIO_MODE 0x02 +#define XREG_RF_FREQ 0x03 +#define XREG_D_CODE 0x04 +#define XREG_IF_OUT 0x05 +#define XREG_SEEK_MODE 0x07 +#define XREG_POWER_DOWN 0x0A +#define XREG_SIGNALSOURCE 0x0D /* 0=Air, 1=Cable */ +#define XREG_SMOOTHEDCVBS 0x0E +#define XREG_XTALFREQ 0x0F +#define XREG_FINERFFREQ 0x10 +#define XREG_DDIMODE 0x11 + +#define XREG_ADC_ENV 0x00 +#define XREG_QUALITY 0x01 +#define XREG_FRAME_LINES 0x02 +#define XREG_HSYNC_FREQ 0x03 +#define XREG_LOCK 0x04 +#define XREG_FREQ_ERROR 0x05 +#define XREG_SNR 0x06 +#define XREG_VERSION 0x07 +#define XREG_PRODUCT_ID 0x08 +#define XREG_BUSY 0x09 + +/* + Basic firmware description. This will remain with + the driver for documentation purposes. + + This represents an I2C firmware file encoded as a + string of unsigned char. Format is as follows: + + char[0 ]=len0_MSB -> len = len_MSB * 256 + len_LSB + char[1 ]=len0_LSB -> length of first write transaction + char[2 ]=data0 -> first byte to be sent + char[3 ]=data1 + char[4 ]=data2 + char[ ]=... + char[M ]=dataN -> last byte to be sent + char[M+1]=len1_MSB -> len = len_MSB * 256 + len_LSB + char[M+2]=len1_LSB -> length of second write transaction + char[M+3]=data0 + char[M+4]=data1 + ... + etc. + + The [len] value should be interpreted as follows: + + len= len_MSB _ len_LSB + len=1111_1111_1111_1111 : End of I2C_SEQUENCE + len=0000_0000_0000_0000 : Reset command: Do hardware reset + len=0NNN_NNNN_NNNN_NNNN : Normal transaction: number of bytes = {1:32767) + len=1WWW_WWWW_WWWW_WWWW : Wait command: wait for {1:32767} ms + + For the RESET and WAIT commands, the two following bytes will contain + immediately the length of the following transaction. + +*/ +typedef struct { + char *Name; + unsigned short AudioMode; + unsigned short VideoMode; +} XC_TV_STANDARD; + +/* Tuner standards */ +#define DTV6 17 + +XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = { + {"M/N-NTSC/PAL-BTSC", 0x0400, 0x8020}, + {"M/N-NTSC/PAL-A2", 0x0600, 0x8020}, + {"M/N-NTSC/PAL-EIAJ", 0x0440, 0x8020}, + {"M/N-NTSC/PAL-Mono", 0x0478, 0x8020}, + {"B/G-PAL-A2", 0x0A00, 0x8049}, + {"B/G-PAL-NICAM", 0x0C04, 0x8049}, + {"B/G-PAL-MONO", 0x0878, 0x8059}, + {"I-PAL-NICAM", 0x1080, 0x8009}, + {"I-PAL-NICAM-MONO", 0x0E78, 0x8009}, + {"D/K-PAL-A2", 0x1600, 0x8009}, + {"D/K-PAL-NICAM", 0x0E80, 0x8009}, + {"D/K-PAL-MONO", 0x1478, 0x8009}, + {"D/K-SECAM-A2 DK1", 0x1200, 0x8009}, + {"D/K-SECAM-A2 L/DK3",0x0E00, 0x8009}, + {"D/K-SECAM-A2 MONO", 0x1478, 0x8009}, + {"L-SECAM-NICAM", 0x8E82, 0x0009}, + {"L'-SECAM-NICAM", 0x8E82, 0x4009}, + {"DTV6", 0x00C0, 0x8002}, + {"DTV8", 0x00C0, 0x800B}, + {"DTV7/8", 0x00C0, 0x801B}, + {"DTV7", 0x00C0, 0x8007}, + {"FM Radio-INPUT2", 0x9802, 0x9002}, + {"FM Radio-INPUT1", 0x0208, 0x9002} +}; + +static int xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len); +static int xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len); +static void xc5000_TunerReset(struct dvb_frontend *fe); + +int xc_send_i2c_data(struct xc5000_priv *priv, + unsigned char *bytes_to_send, int nb_bytes_to_send) +{ + return xc5000_writeregs(priv, bytes_to_send, nb_bytes_to_send) + ? XC_RESULT_I2C_WRITE_FAILURE : XC_RESULT_SUCCESS; +} + +int xc_read_i2c_data(struct xc5000_priv *priv, unsigned char *bytes_received, + int nb_bytes_to_receive) +{ + return xc5000_readregs(priv, bytes_received, nb_bytes_to_receive) + ? XC_RESULT_I2C_READ_FAILURE : XC_RESULT_SUCCESS; +} + +int xc_reset(struct dvb_frontend *fe) +{ + xc5000_TunerReset(fe); + return XC_RESULT_SUCCESS; +} + +void xc_wait(int wait_ms) +{ + msleep( wait_ms ); +} + +static void xc5000_TunerReset(struct dvb_frontend *fe) +{ + struct xc5000_priv *priv = fe->tuner_priv; + int ret; + + dprintk(1, "%s()\n", __FUNCTION__); + + if(priv->cfg->tuner_reset) { + ret = priv->cfg->tuner_reset(fe); + if (ret) + printk(KERN_ERR "xc5000: reset failed\n"); + } else + printk(KERN_ERR "xc5000: no tuner reset function, fatal\n"); +} + +int xc_write_reg(struct xc5000_priv *priv, unsigned short int regAddr, + unsigned short int i2cData) +{ + unsigned char buf[4]; + int WatchDogTimer = 5; + int result; + + buf[0] = (regAddr >> 8) & 0xFF; + buf[1] = regAddr & 0xFF; + buf[2] = (i2cData >> 8) & 0xFF; + buf[3] = i2cData & 0xFF; + result = xc_send_i2c_data(priv, buf, 4); + if ( result == XC_RESULT_SUCCESS) { + /* wait for busy flag to clear */ + while ((WatchDogTimer > 0) && (result == XC_RESULT_SUCCESS)) { + buf[0] = 0; + buf[1] = XREG_BUSY; + + result = xc_send_i2c_data(priv, buf, 2); + if (result == XC_RESULT_SUCCESS) { + result = xc_read_i2c_data(priv, buf, 2); + if (result == XC_RESULT_SUCCESS) { + if ((buf[0] == 0) && (buf[1] == 0)) { + /* busy flag cleared */ + break; + } else { + xc_wait(100); /* wait 5 ms */ + WatchDogTimer--; + } + } + } + } + } + if (WatchDogTimer < 0) + result = XC_RESULT_I2C_WRITE_FAILURE; + + return result; +} + +int xc_read_reg(struct xc5000_priv *priv, unsigned short int regAddr, + unsigned short int *i2cData) +{ + unsigned char buf[2]; + int result; + + buf[0] = (regAddr >> 8) & 0xFF; + buf[1] = regAddr & 0xFF; + result = xc_send_i2c_data(priv, buf, 2); + if (result!=XC_RESULT_SUCCESS) + return result; + + result = xc_read_i2c_data(priv, buf, 2); + if (result!=XC_RESULT_SUCCESS) + return result; + + *i2cData = buf[0] * 256 + buf[1]; + return result; +} + +int xc_load_i2c_sequence(struct dvb_frontend *fe, unsigned char i2c_sequence[]) +{ + struct xc5000_priv *priv = fe->tuner_priv; + + int i, nbytes_to_send, result; + unsigned int len, pos, index; + unsigned char buf[XC_MAX_I2C_WRITE_LENGTH]; + + index=0; + while ((i2c_sequence[index]!=0xFF) || (i2c_sequence[index+1]!=0xFF)) { + + len = i2c_sequence[index]* 256 + i2c_sequence[index+1]; + if (len==0x0000) { + /* RESET command */ + result = xc_reset(fe); + index += 2; + if (result!=XC_RESULT_SUCCESS) + return result; + } else if (len & 0x8000) { + /* WAIT command */ + xc_wait(len & 0x7FFF); + index += 2; + } else { + /* Send i2c data whilst ensuring individual transactions + * do not exceed XC_MAX_I2C_WRITE_LENGTH bytes. + */ + index += 2; + buf[0] = i2c_sequence[index]; + buf[1] = i2c_sequence[index + 1]; + pos = 2; + while (pos < len) { + if ((len - pos) > XC_MAX_I2C_WRITE_LENGTH - 2) { + nbytes_to_send = XC_MAX_I2C_WRITE_LENGTH; + } else { + nbytes_to_send = (len - pos + 2); + } + for (i=2; ivideo_standard].Name); + + ret = xc_write_reg(priv, XREG_VIDEO_MODE, VideoMode); + if (ret == XC_RESULT_SUCCESS) + ret = xc_write_reg(priv, XREG_AUDIO_MODE, AudioMode); + + return ret; +} + +int xc_shutdown(struct xc5000_priv *priv) +{ + return xc_write_reg(priv, XREG_POWER_DOWN, 0); +} + +int xc_SetSignalSource(struct xc5000_priv *priv, unsigned short int rf_mode) +{ + dprintk(1, "%s(%d) Source = %s\n", __FUNCTION__, rf_mode, + rf_mode == XC_RF_MODE_AIR ? "ANTENNA" : "CABLE"); + + if( (rf_mode != XC_RF_MODE_AIR) && (rf_mode != XC_RF_MODE_CABLE) ) + { + rf_mode = XC_RF_MODE_CABLE; + printk(KERN_ERR + "%s(), Invalid mode, defaulting to CABLE", + __FUNCTION__); + } + return xc_write_reg(priv, XREG_SIGNALSOURCE, rf_mode); +} + +int xc_set_RF_frequency(struct xc5000_priv *priv, long frequency_in_hz) +{ + unsigned int frequency_code = (unsigned int)(frequency_in_hz / 15625); + + if ((frequency_in_hz>1023000000) || (frequency_in_hz<1000000)) + return XC_RESULT_OUT_OF_RANGE; + + return xc_write_reg(priv, XREG_RF_FREQ ,frequency_code); +} + +int xc_FineTune_RF_frequency(struct xc5000_priv *priv, long frequency_in_hz) +{ + unsigned int frequency_code = (unsigned int)(frequency_in_hz / 15625); + if ((frequency_in_hz>1023000000) || (frequency_in_hz<1000000)) + return XC_RESULT_OUT_OF_RANGE; + + return xc_write_reg(priv, XREG_FINERFFREQ ,frequency_code); +} + +int xc_set_IF_frequency(struct xc5000_priv *priv, u32 freq_hz) +{ + u32 freq_code = (freq_hz * 1024)/1000000; + dprintk(1, "%s(%d)\n", __FUNCTION__, freq_hz); + + printk(KERN_ERR "FIXME - Hardcoded IF, FIXME\n"); + freq_code = 0x1585; + + return xc_write_reg(priv, XREG_IF_OUT ,freq_code); +} + +int xc_set_Xtal_frequency(struct xc5000_priv *priv, long xtalFreqInKHz) +{ + unsigned int xtalRatio = (32000 * 0x8000)/xtalFreqInKHz; + return xc_write_reg(priv, XREG_XTALFREQ ,xtalRatio); +} + +int xc_get_ADC_Envelope(struct xc5000_priv *priv, + unsigned short int *adc_envelope) +{ + return xc_read_reg(priv, XREG_ADC_ENV, adc_envelope); +} + +int xc_get_frequency_error(struct xc5000_priv *priv, u32 *frequency_error_hz) +{ + int result; + unsigned short int regData; + u32 tmp; + + result = xc_read_reg(priv, XREG_FREQ_ERROR, ®Data); + if (result) + return result; + + tmp = (u32)regData; + (*frequency_error_hz) = (tmp * 15625) / 1000; + return result; +} + +int xc_get_lock_status(struct xc5000_priv *priv, + unsigned short int *lock_status) +{ + return xc_read_reg(priv, XREG_LOCK, lock_status); +} + +int xc_get_version(struct xc5000_priv *priv, + unsigned char* hw_majorversion, + unsigned char* hw_minorversion, + unsigned char* fw_majorversion, + unsigned char* fw_minorversion) +{ + unsigned short int data; + int result; + + result = xc_read_reg(priv, XREG_VERSION, &data); + if (result) + return result; + + (*hw_majorversion) = (data>>12) & 0x0F; + (*hw_minorversion) = (data>>8) & 0x0F; + (*fw_majorversion) = (data>>4) & 0x0F; + (*fw_minorversion) = (data) & 0x0F; + + return 0; +} + +int xc_get_product_id(struct xc5000_priv *priv, unsigned short int *product_id) +{ + return xc_read_reg(priv, XREG_PRODUCT_ID, product_id); +} + +int xc_get_hsync_freq(struct xc5000_priv *priv, int *hsync_freq_hz) +{ + unsigned short int regData; + int result; + + result = xc_read_reg(priv, XREG_HSYNC_FREQ, ®Data); + if (result) + return result; + + (*hsync_freq_hz) = ((regData & 0x0fff) * 763)/100; + return result; +} + +int xc_get_frame_lines(struct xc5000_priv *priv, + unsigned short int *frame_lines) +{ + return xc_read_reg(priv, XREG_FRAME_LINES, frame_lines); +} + +int xc_get_quality(struct xc5000_priv *priv, unsigned short int *quality) +{ + return xc_read_reg(priv, XREG_QUALITY, quality); +} + +unsigned short int WaitForLock(struct xc5000_priv *priv) +{ + unsigned short int lockState = 0; + int watchDogCount = 40; + while ((lockState == 0) && (watchDogCount > 0)) + { + xc_get_lock_status(priv, &lockState); + if (lockState != 1) + { + xc_wait(5); + watchDogCount--; + } + } + return lockState; +} + +int xc_tune_channel(struct xc5000_priv *priv, u32 freq) +{ + int found = 0; + + dprintk(1, "%s(%d)\n", __FUNCTION__, freq); + + if (xc_set_RF_frequency(priv, freq) != XC_RESULT_SUCCESS) + return 0; + + if (WaitForLock(priv)== 1) + found = 1; + + return found; +} + +static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val) +{ + u8 buf[2] = { reg >> 8, reg & 0xff }; + u8 bval[2] = { 0, 0 }; + struct i2c_msg msg[2] = { + { .addr = priv->cfg->i2c_address, + .flags = 0, .buf = &buf[0], .len = 2 }, + { .addr = priv->cfg->i2c_address, + .flags = I2C_M_RD, .buf = &bval[0], .len = 2 }, + }; + + if (i2c_transfer(priv->i2c, msg, 2) != 2) { + printk(KERN_WARNING "xc5000 I2C read failed\n"); + return -EREMOTEIO; + } + + *val = (bval[0] << 8) | bval[1]; + return 0; +} + +static int xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len) +{ + struct i2c_msg msg = { .addr = priv->cfg->i2c_address, + .flags = 0, .buf = buf, .len = len }; + + if (i2c_transfer(priv->i2c, &msg, 1) != 1) { + printk(KERN_ERR "xc5000 I2C write failed (len=%i)\n", + (int)len); + return -EREMOTEIO; + } + return 0; +} + +static int xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len) +{ + struct i2c_msg msg = { .addr = priv->cfg->i2c_address, + .flags = I2C_M_RD, .buf = buf, .len = len }; + + if (i2c_transfer(priv->i2c, &msg, 1) != 1) { + printk(KERN_ERR "xc5000 I2C read failed (len=%i)\n",(int)len); + return -EREMOTEIO; + } + return 0; +} + +static int xc5000_fwupload(struct dvb_frontend* fe) +{ + struct xc5000_priv *priv = fe->tuner_priv; + const struct firmware *fw; + int ret; + + /* request the firmware, this will block until someone uploads it */ + printk(KERN_INFO "xc5000: waiting for firmware upload (%s)...\n", + XC5000_DEFAULT_FIRMWARE); + + if(!priv->cfg->request_firmware) { + printk(KERN_ERR "xc5000: no firmware callback, fatal\n"); + return -EIO; + } + + ret = priv->cfg->request_firmware(fe, &fw, XC5000_DEFAULT_FIRMWARE); + if (ret) { + printk(KERN_ERR "xc5000: Upload failed. (file not found?)\n"); + ret = XC_RESULT_RESET_FAILURE; + } else { + printk(KERN_INFO "xc5000: firmware read %d bytes.\n", fw->size); + ret = XC_RESULT_SUCCESS; + } + + if(fw->size != XC5000_DEFAULT_FIRMWARE_SIZE) { + printk(KERN_ERR "xc5000: firmware incorrect size\n"); + ret = XC_RESULT_RESET_FAILURE; + } else { + printk(KERN_INFO "xc5000: firmware upload\n"); + ret = xc_load_i2c_sequence(fe, fw->data ); + } + + release_firmware(fw); + return ret; +} + +void xc_debug_dump(struct xc5000_priv *priv) +{ + unsigned short adc_envelope; + u32 frequency_error_hz; + unsigned short lock_status; + unsigned char hw_majorversion, hw_minorversion = 0; + unsigned char fw_majorversion, fw_minorversion = 0; + int hsync_freq_hz; + unsigned short frame_lines; + unsigned short quality; + + /* Wait for stats to stabilize. + * Frame Lines needs two frame times after initial lock + * before it is valid. + */ + xc_wait( 100 ); + + xc_get_ADC_Envelope(priv, &adc_envelope ); + dprintk(1, "*** ADC envelope (0-1023) = %u\n", adc_envelope); + + xc_get_frequency_error(priv, &frequency_error_hz ); + dprintk(1, "*** Frequency error = %d Hz\n", frequency_error_hz); + + xc_get_lock_status(priv, &lock_status ); + dprintk(1, "*** Lock status (0-Wait, 1-Locked, 2-No-signal) = %u\n", + lock_status); + + xc_get_version(priv, &hw_majorversion, &hw_minorversion, + &fw_majorversion, &fw_minorversion ); + dprintk(1, "*** HW: V%02x.%02x, FW: V%02x.%02x\n", + hw_majorversion, hw_minorversion, + fw_majorversion, fw_minorversion); + + xc_get_hsync_freq(priv, &hsync_freq_hz ); + dprintk(1, "*** Horizontal sync frequency = %u Hz\n", hsync_freq_hz); + + xc_get_frame_lines(priv, &frame_lines ); + dprintk(1, "*** Frame lines = %u\n", frame_lines); + + xc_get_quality(priv, &quality ); + dprintk(1, "*** Quality (0:<8dB, 7:>56dB) = %u\n", quality); +} + +static int xc5000_set_params(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params) +{ + struct xc5000_priv *priv = fe->tuner_priv; + + dprintk(1, "%s() frequency=%d\n", __FUNCTION__, params->frequency); + + priv->frequency = params->frequency - 1750000; + priv->bandwidth = 6; + priv->video_standard = DTV6; + + switch(params->u.vsb.modulation) { + case VSB_8: + case VSB_16: + dprintk(1, "%s() VSB modulation\n", __FUNCTION__); + priv->rf_mode = XC_RF_MODE_AIR; + break; + case QAM_64: + case QAM_256: + case QAM_AUTO: + dprintk(1, "%s() QAM modulation\n", __FUNCTION__); + priv->rf_mode = XC_RF_MODE_CABLE; + break; + default: + return -EINVAL; + } + + dprintk(1, "%s() frequency=%d (compensated)\n", + __FUNCTION__, priv->frequency); + + /* FIXME: check result codes */ + xc_SetSignalSource(priv, priv->rf_mode); + + xc_SetTVStandard(priv, + XC5000_Standard[priv->video_standard].VideoMode, + XC5000_Standard[priv->video_standard].AudioMode); + + xc_set_IF_frequency(priv, priv->cfg->if_frequency); + xc_tune_channel(priv, priv->frequency); + xc_debug_dump(priv); + + return 0; +} + +static int xc5000_get_frequency(struct dvb_frontend *fe, u32 *freq) +{ + struct xc5000_priv *priv = fe->tuner_priv; + dprintk(1, "%s()\n", __FUNCTION__); + *freq = priv->frequency; + return 0; +} + +static int xc5000_get_bandwidth(struct dvb_frontend *fe, u32 *bw) +{ + struct xc5000_priv *priv = fe->tuner_priv; + dprintk(1, "%s()\n", __FUNCTION__); + *bw = priv->bandwidth; + return 0; +} + +static int xc5000_get_status(struct dvb_frontend *fe, u32 *status) +{ + struct xc5000_priv *priv = fe->tuner_priv; + unsigned short int lock_status = 0; + + xc_get_lock_status(priv, &lock_status); + + dprintk(1, "%s() lock_status = 0x%08x\n", __FUNCTION__, lock_status); + + *status = lock_status; + + return 0; +} + +int xc_load_fw_and_init_tuner(struct dvb_frontend *fe) +{ + struct xc5000_priv *priv = fe->tuner_priv; + int ret; + + if(priv->fwloaded == 0) { + ret = xc5000_fwupload(fe); + if( ret != XC_RESULT_SUCCESS ) + return -EREMOTEIO; + + priv->fwloaded = 1; + } + + /* Start the tuner self-calibration process */ + ret |= xc_initialize(priv); + + /* Wait for calibration to complete. + * We could continue but XC5000 will clock stretch subsequent + * I2C transactions until calibration is complete. This way we + * don't have to rely on clock stretching working. + */ + xc_wait( 100 ); + + /* Default to "CABLE" mode */ + ret |= xc_write_reg(priv, XREG_SIGNALSOURCE, XC_RF_MODE_CABLE); + + return ret; +} + +static int xc5000_init(struct dvb_frontend *fe) +{ + struct xc5000_priv *priv = fe->tuner_priv; + dprintk(1, "%s()\n", __FUNCTION__); + + xc_load_fw_and_init_tuner(fe); + xc_debug_dump(priv); + + return 0; +} + +static int xc5000_release(struct dvb_frontend *fe) +{ + dprintk(1, "%s()\n", __FUNCTION__); + kfree(fe->tuner_priv); + fe->tuner_priv = NULL; + return 0; +} + +static const struct dvb_tuner_ops xc5000_tuner_ops = { + .info = { + .name = "Xceive XC5000", + .frequency_min = 1000000, + .frequency_max = 1023000000, + .frequency_step = 50000, + }, + + .release = xc5000_release, + .init = xc5000_init, + + .set_params = xc5000_set_params, + .get_frequency = xc5000_get_frequency, + .get_bandwidth = xc5000_get_bandwidth, + .get_status = xc5000_get_status +}; + +struct dvb_frontend * xc5000_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + struct xc5000_config *cfg) +{ + struct xc5000_priv *priv = NULL; + u16 id = 0; + + dprintk(1, "%s()\n", __FUNCTION__); + + priv = kzalloc(sizeof(struct xc5000_priv), GFP_KERNEL); + if (priv == NULL) + return NULL; + + priv->cfg = cfg; + priv->bandwidth = 6000000; /* 6MHz */ + priv->i2c = i2c; + priv->fwloaded = 0; + + if (xc5000_readreg(priv, XREG_PRODUCT_ID, &id) != 0) { + kfree(priv); + return NULL; + } + + if ( (id != 0x2000) && (id != 0x1388) ) { + printk(KERN_ERR + "xc5000: Device not found at addr 0x%02x (0x%x)\n", + cfg->i2c_address, id); + kfree(priv); + return NULL; + } + + printk(KERN_INFO "xc5000: successfully identified at address 0x%02x\n", + cfg->i2c_address); + + memcpy(&fe->ops.tuner_ops, &xc5000_tuner_ops, + sizeof(struct dvb_tuner_ops)); + + fe->tuner_priv = priv; + + return fe; +} +EXPORT_SYMBOL(xc5000_attach); + +MODULE_AUTHOR("Steven Toth"); +MODULE_DESCRIPTION("Xceive XC5000 silicon tuner driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/xc5000.h b/drivers/media/dvb/frontends/xc5000.h new file mode 100644 index 000000000000..ce5a3212f8f4 --- /dev/null +++ b/drivers/media/dvb/frontends/xc5000.h @@ -0,0 +1,51 @@ +/* + * Driver for Xceive XC5000 "QAM/8VSB single chip tuner" + * + * Copyright (c) 2007 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __XC5000_H__ +#define __XC5000_H__ + +#include + +struct dvb_frontend; +struct i2c_adapter; + +struct xc5000_config { + u8 i2c_address; + u32 if_frequency; + int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name); + int (*tuner_reset)(struct dvb_frontend* fe); +}; + +#if defined(CONFIG_DVB_TUNER_XC5000) || defined(CONFIG_DVB_TUNER_XC5000_MODULE) +extern struct dvb_frontend* xc5000_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + struct xc5000_config *cfg); +#else +static inline struct dvb_frontend* xc5000_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + struct xc5000_config *cfg); +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + return NULL; +} +#endif // CONFIG_DVB_TUNER_XC5000 + +#endif // __XC5000_H__ diff --git a/drivers/media/dvb/frontends/xc5000_priv.h b/drivers/media/dvb/frontends/xc5000_priv.h new file mode 100644 index 000000000000..a2b54535db0f --- /dev/null +++ b/drivers/media/dvb/frontends/xc5000_priv.h @@ -0,0 +1,37 @@ +/* + * Driver for Xceive XC5000 "QAM/8VSB single chip tuner" + * + * Copyright (c) 2007 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef XC5000_PRIV_H +#define XC5000_PRIV_H + +struct xc5000_priv { + struct xc5000_config *cfg; + struct i2c_adapter *i2c; + + u32 frequency; + u32 bandwidth; + u8 video_standard; + u8 rf_mode; + + u8 fwloaded; +}; + +#endif -- cgit v1.2.3-59-g8ed1b From d1987d55a1eda774dfbab240a432607c17241d07 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Tue, 18 Dec 2007 01:57:06 -0300 Subject: V4L/DVB (6885): Add support for the Hauppauge HVR1500Q The express card ATSC/QAM tuner. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.cx23885 | 1 + drivers/media/video/cx23885/cx23885-cards.c | 17 +++++++++ drivers/media/video/cx23885/cx23885-dvb.c | 54 +++++++++++++++++++++++++++++ drivers/media/video/cx23885/cx23885-i2c.c | 2 +- drivers/media/video/cx23885/cx23885.h | 1 + 5 files changed, 74 insertions(+), 1 deletion(-) diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885 index 00cb646a4bde..54d06e4ff743 100644 --- a/Documentation/video4linux/CARDLIST.cx23885 +++ b/Documentation/video4linux/CARDLIST.cx23885 @@ -3,3 +3,4 @@ 2 -> Hauppauge WinTV-HVR1800 [0070:7800,0070:7801] 3 -> Hauppauge WinTV-HVR1250 [0070:7911] 4 -> DViCO FusionHDTV5 Express [18ac:d500] + 5 -> Hauppauge WinTV-HVR1500Q [0070:7797] diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 134b931b160e..515f415564d5 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -113,6 +113,11 @@ struct cx23885_board cx23885_boards[] = { .name = "DViCO FusionHDTV5 Express", .portb = CX23885_MPEG_DVB, }, + [CX23885_BOARD_HAUPPAUGE_HVR1500Q] = { + .name = "Hauppauge WinTV-HVR1500Q", + .portc = CX23885_MPEG_DVB, + }, + }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -144,6 +149,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x18ac, .subdevice = 0xd500, .card = CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP, + },{ + .subvendor = 0x0070, + .subdevice = 0x7797, + .card = CX23885_BOARD_HAUPPAUGE_HVR1500Q, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -204,6 +213,11 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) /* GPIO-0 cx24227 demodulator reset */ cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */ break; + case CX23885_BOARD_HAUPPAUGE_HVR1500Q: + /* GPIO-0 cx24227 demodulator reset */ + /* GPIO-2 xc5000 tuner reset */ + cx_set(GP0_IO, 0x00050005); /* Bring the part out of reset */ + break; case CX23885_BOARD_HAUPPAUGE_HVR1800: /* GPIO-0 656_CLK */ /* GPIO-1 656_D0 */ @@ -221,6 +235,7 @@ int cx23885_ir_init(struct cx23885_dev *dev) { switch (dev->board) { case CX23885_BOARD_HAUPPAUGE_HVR1250: + case CX23885_BOARD_HAUPPAUGE_HVR1500Q: case CX23885_BOARD_HAUPPAUGE_HVR1800: /* FIXME: Implement me */ break; @@ -244,6 +259,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) switch (dev->board) { case CX23885_BOARD_HAUPPAUGE_HVR1250: + case CX23885_BOARD_HAUPPAUGE_HVR1500Q: case CX23885_BOARD_HAUPPAUGE_HVR1800: case CX23885_BOARD_HAUPPAUGE_HVR1800lp: if (dev->i2c_bus[0].i2c_rc == 0) @@ -258,6 +274,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; break; case CX23885_BOARD_HAUPPAUGE_HVR1250: + case CX23885_BOARD_HAUPPAUGE_HVR1500Q: case CX23885_BOARD_HAUPPAUGE_HVR1800: case CX23885_BOARD_HAUPPAUGE_HVR1800lp: default: diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 96d732098a0d..5fa65ef08bfd 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -33,6 +33,7 @@ #include "s5h1409.h" #include "mt2131.h" #include "lgdt330x.h" +#include "xc5000.h" #include "dvb-pll.h" static unsigned int debug = 0; @@ -74,6 +75,32 @@ static void dvb_buf_release(struct videobuf_queue *q, cx23885_free_buffer(q, (struct cx23885_buffer*)vb); } +static int cx23885_request_firmware(struct dvb_frontend *fe, + const struct firmware **fw, char *name) +{ + struct cx23885_tsport *port = fe->dvb->priv; + struct cx23885_dev *dev = port->dev; + + dprintk(1, "%s(?,?,%s)\n", __FUNCTION__, name); + + return request_firmware(fw, name, &dev->pci->dev); +} + +static int hauppauge_hvr1500q_tuner_reset(struct dvb_frontend *fe) +{ + struct cx23885_tsport *port = fe->dvb->priv; + struct cx23885_dev *dev = port->dev; + + dprintk(1, "%s()\n", __FUNCTION__); + + /* Drive the tuner into reset back back */ + cx_clear(GP0_IO, 0x00000004); + mdelay(200); + cx_set(GP0_IO, 0x00000004); + + return 0; +} + static struct videobuf_queue_ops dvb_qops = { .buf_setup = dvb_buf_setup, .buf_prepare = dvb_buf_prepare, @@ -109,6 +136,22 @@ static struct lgdt330x_config fusionhdtv_5_express = { .serial_mpeg = 0x40, }; +static struct s5h1409_config hauppauge_hvr1500q_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_SERIAL_OUTPUT, + .gpio = S5H1409_GPIO_ON, + .qam_if = 44000, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING +}; + +static struct xc5000_config hauppauge_hvr1500q_tunerconfig = { + .i2c_address = 0x61, + .if_frequency = 4570000, + .request_firmware = cx23885_request_firmware, + .tuner_reset = hauppauge_hvr1500q_tuner_reset +}; + static int dvb_register(struct cx23885_tsport *port) { struct cx23885_dev *dev = port->dev; @@ -152,6 +195,17 @@ static int dvb_register(struct cx23885_tsport *port) &i2c_bus->i2c_adap, DVB_PLL_LG_TDVS_H06XF); } break; + case CX23885_BOARD_HAUPPAUGE_HVR1500Q: + i2c_bus = &dev->i2c_bus[1]; + port->dvb.frontend = dvb_attach(s5h1409_attach, + &hauppauge_hvr1500q_config, + &dev->i2c_bus[0].i2c_adap); + if (port->dvb.frontend != NULL) { + dvb_attach(xc5000_attach, port->dvb.frontend, + &i2c_bus->i2c_adap, + &hauppauge_hvr1500q_tunerconfig); + } + break; default: printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n", dev->name); diff --git a/drivers/media/video/cx23885/cx23885-i2c.c b/drivers/media/video/cx23885/cx23885-i2c.c index 20f3fb450f88..b2ffbf04ef2c 100644 --- a/drivers/media/video/cx23885/cx23885-i2c.c +++ b/drivers/media/video/cx23885/cx23885-i2c.c @@ -332,7 +332,7 @@ static char *i2c_devs[128] = { [ 0x84 >> 1 ] = "tda8295", [ 0xa0 >> 1 ] = "eeprom", [ 0xc0 >> 1 ] = "tuner/mt2131/tda8275", - [ 0xc2 >> 1 ] = "tuner/mt2131/tda8275", + [ 0xc2 >> 1 ] = "tuner/mt2131/tda8275/xc5000", }; static void do_i2c_scan(char *name, struct i2c_client *c) diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index 205640cc48f7..3f019f3cb292 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -53,6 +53,7 @@ #define CX23885_BOARD_HAUPPAUGE_HVR1800 2 #define CX23885_BOARD_HAUPPAUGE_HVR1250 3 #define CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP 4 +#define CX23885_BOARD_HAUPPAUGE_HVR1500Q 5 enum cx23885_itype { CX23885_VMUX_COMPOSITE1 = 1, -- cgit v1.2.3-59-g8ed1b From e12671cf0c3c8460dfa3ab945023803612827fb7 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 20 Dec 2007 01:14:43 -0300 Subject: V4L/DVB (6886): xc5000: Cleanups of types, result codes etc This translates much of the xceive coding style, adds some result codes and generally cleans up whitespace and function arguments. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/xc5000.c | 300 ++++++++++++++++-------------- drivers/media/dvb/frontends/xc5000.h | 5 +- drivers/media/dvb/frontends/xc5000_priv.h | 3 +- drivers/media/video/cx23885/cx23885-dvb.c | 6 +- 4 files changed, 163 insertions(+), 151 deletions(-) diff --git a/drivers/media/dvb/frontends/xc5000.c b/drivers/media/dvb/frontends/xc5000.c index 048f9a79b915..9edd07115395 100644 --- a/drivers/media/dvb/frontends/xc5000.c +++ b/drivers/media/dvb/frontends/xc5000.c @@ -117,8 +117,8 @@ MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); */ typedef struct { char *Name; - unsigned short AudioMode; - unsigned short VideoMode; + u16 AudioMode; + u16 VideoMode; } XC_TV_STANDARD; /* Tuner standards */ @@ -154,29 +154,27 @@ static int xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len); static int xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len); static void xc5000_TunerReset(struct dvb_frontend *fe); -int xc_send_i2c_data(struct xc5000_priv *priv, - unsigned char *bytes_to_send, int nb_bytes_to_send) +static int xc_send_i2c_data(struct xc5000_priv *priv, u8 *buf, int len) { - return xc5000_writeregs(priv, bytes_to_send, nb_bytes_to_send) + return xc5000_writeregs(priv, buf, len) ? XC_RESULT_I2C_WRITE_FAILURE : XC_RESULT_SUCCESS; } -int xc_read_i2c_data(struct xc5000_priv *priv, unsigned char *bytes_received, - int nb_bytes_to_receive) +static int xc_read_i2c_data(struct xc5000_priv *priv, u8 *buf, int len) { - return xc5000_readregs(priv, bytes_received, nb_bytes_to_receive) + return xc5000_readregs(priv, buf, len) ? XC_RESULT_I2C_READ_FAILURE : XC_RESULT_SUCCESS; } -int xc_reset(struct dvb_frontend *fe) +static int xc_reset(struct dvb_frontend *fe) { xc5000_TunerReset(fe); return XC_RESULT_SUCCESS; } -void xc_wait(int wait_ms) +static void xc_wait(int wait_ms) { - msleep( wait_ms ); + msleep(wait_ms); } static void xc5000_TunerReset(struct dvb_frontend *fe) @@ -186,7 +184,7 @@ static void xc5000_TunerReset(struct dvb_frontend *fe) dprintk(1, "%s()\n", __FUNCTION__); - if(priv->cfg->tuner_reset) { + if (priv->cfg->tuner_reset) { ret = priv->cfg->tuner_reset(fe); if (ret) printk(KERN_ERR "xc5000: reset failed\n"); @@ -194,10 +192,9 @@ static void xc5000_TunerReset(struct dvb_frontend *fe) printk(KERN_ERR "xc5000: no tuner reset function, fatal\n"); } -int xc_write_reg(struct xc5000_priv *priv, unsigned short int regAddr, - unsigned short int i2cData) +static int xc_write_reg(struct xc5000_priv *priv, u16 regAddr, u16 i2cData) { - unsigned char buf[4]; + u8 buf[4]; int WatchDogTimer = 5; int result; @@ -206,7 +203,7 @@ int xc_write_reg(struct xc5000_priv *priv, unsigned short int regAddr, buf[2] = (i2cData >> 8) & 0xFF; buf[3] = i2cData & 0xFF; result = xc_send_i2c_data(priv, buf, 4); - if ( result == XC_RESULT_SUCCESS) { + if (result == XC_RESULT_SUCCESS) { /* wait for busy flag to clear */ while ((WatchDogTimer > 0) && (result == XC_RESULT_SUCCESS)) { buf[0] = 0; @@ -233,43 +230,42 @@ int xc_write_reg(struct xc5000_priv *priv, unsigned short int regAddr, return result; } -int xc_read_reg(struct xc5000_priv *priv, unsigned short int regAddr, - unsigned short int *i2cData) +static int xc_read_reg(struct xc5000_priv *priv, u16 regAddr, u16 *i2cData) { - unsigned char buf[2]; + u8 buf[2]; int result; buf[0] = (regAddr >> 8) & 0xFF; buf[1] = regAddr & 0xFF; result = xc_send_i2c_data(priv, buf, 2); - if (result!=XC_RESULT_SUCCESS) + if (result != XC_RESULT_SUCCESS) return result; result = xc_read_i2c_data(priv, buf, 2); - if (result!=XC_RESULT_SUCCESS) + if (result != XC_RESULT_SUCCESS) return result; *i2cData = buf[0] * 256 + buf[1]; return result; } -int xc_load_i2c_sequence(struct dvb_frontend *fe, unsigned char i2c_sequence[]) +static int xc_load_i2c_sequence(struct dvb_frontend *fe, u8 i2c_sequence[]) { struct xc5000_priv *priv = fe->tuner_priv; int i, nbytes_to_send, result; unsigned int len, pos, index; - unsigned char buf[XC_MAX_I2C_WRITE_LENGTH]; + u8 buf[XC_MAX_I2C_WRITE_LENGTH]; index=0; while ((i2c_sequence[index]!=0xFF) || (i2c_sequence[index+1]!=0xFF)) { len = i2c_sequence[index]* 256 + i2c_sequence[index+1]; - if (len==0x0000) { + if (len == 0x0000) { /* RESET command */ result = xc_reset(fe); index += 2; - if (result!=XC_RESULT_SUCCESS) + if (result != XC_RESULT_SUCCESS) return result; } else if (len & 0x8000) { /* WAIT command */ @@ -294,7 +290,7 @@ int xc_load_i2c_sequence(struct dvb_frontend *fe, unsigned char i2c_sequence[]) } result = xc_send_i2c_data(priv, buf, nbytes_to_send); - if (result!=XC_RESULT_SUCCESS) + if (result != XC_RESULT_SUCCESS) return result; pos += nbytes_to_send - 2; @@ -305,14 +301,14 @@ int xc_load_i2c_sequence(struct dvb_frontend *fe, unsigned char i2c_sequence[]) return XC_RESULT_SUCCESS; } -int xc_initialize(struct xc5000_priv *priv) +static int xc_initialize(struct xc5000_priv *priv) { dprintk(1, "%s()\n", __FUNCTION__); return xc_write_reg(priv, XREG_INIT, 0); } -int xc_SetTVStandard(struct xc5000_priv *priv, unsigned short int VideoMode, - unsigned short int AudioMode) +static int xc_SetTVStandard(struct xc5000_priv *priv, + u16 VideoMode, u16 AudioMode) { int ret; dprintk(1, "%s(%d,%d)\n", __FUNCTION__, VideoMode, AudioMode); @@ -327,17 +323,17 @@ int xc_SetTVStandard(struct xc5000_priv *priv, unsigned short int VideoMode, return ret; } -int xc_shutdown(struct xc5000_priv *priv) +static int xc_shutdown(struct xc5000_priv *priv) { return xc_write_reg(priv, XREG_POWER_DOWN, 0); } -int xc_SetSignalSource(struct xc5000_priv *priv, unsigned short int rf_mode) +static int xc_SetSignalSource(struct xc5000_priv *priv, u16 rf_mode) { dprintk(1, "%s(%d) Source = %s\n", __FUNCTION__, rf_mode, rf_mode == XC_RF_MODE_AIR ? "ANTENNA" : "CABLE"); - if( (rf_mode != XC_RF_MODE_AIR) && (rf_mode != XC_RF_MODE_CABLE) ) + if ((rf_mode != XC_RF_MODE_AIR) && (rf_mode != XC_RF_MODE_CABLE)) { rf_mode = XC_RF_MODE_CABLE; printk(KERN_ERR @@ -347,52 +343,43 @@ int xc_SetSignalSource(struct xc5000_priv *priv, unsigned short int rf_mode) return xc_write_reg(priv, XREG_SIGNALSOURCE, rf_mode); } -int xc_set_RF_frequency(struct xc5000_priv *priv, long frequency_in_hz) -{ - unsigned int frequency_code = (unsigned int)(frequency_in_hz / 15625); +static const struct dvb_tuner_ops xc5000_tuner_ops; - if ((frequency_in_hz>1023000000) || (frequency_in_hz<1000000)) - return XC_RESULT_OUT_OF_RANGE; +static int xc_set_RF_frequency(struct xc5000_priv *priv, u32 freq_hz) +{ + u16 freq_code; - return xc_write_reg(priv, XREG_RF_FREQ ,frequency_code); -} + dprintk(1, "%s(%d)\n", __FUNCTION__, freq_hz); -int xc_FineTune_RF_frequency(struct xc5000_priv *priv, long frequency_in_hz) -{ - unsigned int frequency_code = (unsigned int)(frequency_in_hz / 15625); - if ((frequency_in_hz>1023000000) || (frequency_in_hz<1000000)) + if ((freq_hz > xc5000_tuner_ops.info.frequency_max) || + (freq_hz < xc5000_tuner_ops.info.frequency_min)) return XC_RESULT_OUT_OF_RANGE; - return xc_write_reg(priv, XREG_FINERFFREQ ,frequency_code); + freq_code = (u16)(freq_hz / 15625); + + return xc_write_reg(priv, XREG_RF_FREQ, freq_code); } -int xc_set_IF_frequency(struct xc5000_priv *priv, u32 freq_hz) -{ - u32 freq_code = (freq_hz * 1024)/1000000; - dprintk(1, "%s(%d)\n", __FUNCTION__, freq_hz); - printk(KERN_ERR "FIXME - Hardcoded IF, FIXME\n"); - freq_code = 0x1585; +static int xc_set_IF_frequency(struct xc5000_priv *priv, u32 freq_khz) +{ + u32 freq_code = (freq_khz * 1024)/1000; + dprintk(1, "%s(freq_khz = %d) freq_code = 0x%x\n", + __FUNCTION__, freq_khz, freq_code); - return xc_write_reg(priv, XREG_IF_OUT ,freq_code); + return xc_write_reg(priv, XREG_IF_OUT, freq_code); } -int xc_set_Xtal_frequency(struct xc5000_priv *priv, long xtalFreqInKHz) -{ - unsigned int xtalRatio = (32000 * 0x8000)/xtalFreqInKHz; - return xc_write_reg(priv, XREG_XTALFREQ ,xtalRatio); -} -int xc_get_ADC_Envelope(struct xc5000_priv *priv, - unsigned short int *adc_envelope) +static int xc_get_ADC_Envelope(struct xc5000_priv *priv, u16 *adc_envelope) { return xc_read_reg(priv, XREG_ADC_ENV, adc_envelope); } -int xc_get_frequency_error(struct xc5000_priv *priv, u32 *frequency_error_hz) +static int xc_get_frequency_error(struct xc5000_priv *priv, u32 *freq_error_hz) { int result; - unsigned short int regData; + u16 regData; u32 tmp; result = xc_read_reg(priv, XREG_FREQ_ERROR, ®Data); @@ -400,45 +387,37 @@ int xc_get_frequency_error(struct xc5000_priv *priv, u32 *frequency_error_hz) return result; tmp = (u32)regData; - (*frequency_error_hz) = (tmp * 15625) / 1000; + (*freq_error_hz) = (tmp * 15625) / 1000; return result; } -int xc_get_lock_status(struct xc5000_priv *priv, - unsigned short int *lock_status) +static int xc_get_lock_status(struct xc5000_priv *priv, u16 *lock_status) { return xc_read_reg(priv, XREG_LOCK, lock_status); } -int xc_get_version(struct xc5000_priv *priv, - unsigned char* hw_majorversion, - unsigned char* hw_minorversion, - unsigned char* fw_majorversion, - unsigned char* fw_minorversion) +static int xc_get_version(struct xc5000_priv *priv, + u8 *hw_majorversion, u8 *hw_minorversion, + u8 *fw_majorversion, u8 *fw_minorversion) { - unsigned short int data; + u16 data; int result; result = xc_read_reg(priv, XREG_VERSION, &data); if (result) return result; - (*hw_majorversion) = (data>>12) & 0x0F; - (*hw_minorversion) = (data>>8) & 0x0F; - (*fw_majorversion) = (data>>4) & 0x0F; - (*fw_minorversion) = (data) & 0x0F; + (*hw_majorversion) = (data >> 12) & 0x0F; + (*hw_minorversion) = (data >> 8) & 0x0F; + (*fw_majorversion) = (data >> 4) & 0x0F; + (*fw_minorversion) = data & 0x0F; return 0; } -int xc_get_product_id(struct xc5000_priv *priv, unsigned short int *product_id) -{ - return xc_read_reg(priv, XREG_PRODUCT_ID, product_id); -} - -int xc_get_hsync_freq(struct xc5000_priv *priv, int *hsync_freq_hz) +static int xc_get_hsync_freq(struct xc5000_priv *priv, u32 *hsync_freq_hz) { - unsigned short int regData; + u16 regData; int result; result = xc_read_reg(priv, XREG_HSYNC_FREQ, ®Data); @@ -449,26 +428,24 @@ int xc_get_hsync_freq(struct xc5000_priv *priv, int *hsync_freq_hz) return result; } -int xc_get_frame_lines(struct xc5000_priv *priv, - unsigned short int *frame_lines) +static int xc_get_frame_lines(struct xc5000_priv *priv, u16 *frame_lines) { return xc_read_reg(priv, XREG_FRAME_LINES, frame_lines); } -int xc_get_quality(struct xc5000_priv *priv, unsigned short int *quality) +static int xc_get_quality(struct xc5000_priv *priv, u16 *quality) { return xc_read_reg(priv, XREG_QUALITY, quality); } -unsigned short int WaitForLock(struct xc5000_priv *priv) +static u16 WaitForLock(struct xc5000_priv *priv) { - unsigned short int lockState = 0; + u16 lockState = 0; int watchDogCount = 40; - while ((lockState == 0) && (watchDogCount > 0)) - { + + while ((lockState == 0) && (watchDogCount > 0)) { xc_get_lock_status(priv, &lockState); - if (lockState != 1) - { + if (lockState != 1) { xc_wait(5); watchDogCount--; } @@ -476,16 +453,16 @@ unsigned short int WaitForLock(struct xc5000_priv *priv) return lockState; } -int xc_tune_channel(struct xc5000_priv *priv, u32 freq) +static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz) { int found = 0; - dprintk(1, "%s(%d)\n", __FUNCTION__, freq); + dprintk(1, "%s(%d)\n", __FUNCTION__, freq_hz); - if (xc_set_RF_frequency(priv, freq) != XC_RESULT_SUCCESS) + if (xc_set_RF_frequency(priv, freq_hz) != XC_RESULT_SUCCESS) return 0; - if (WaitForLock(priv)== 1) + if (WaitForLock(priv) == 1) found = 1; return found; @@ -542,15 +519,15 @@ static int xc5000_fwupload(struct dvb_frontend* fe) const struct firmware *fw; int ret; - /* request the firmware, this will block until someone uploads it */ - printk(KERN_INFO "xc5000: waiting for firmware upload (%s)...\n", - XC5000_DEFAULT_FIRMWARE); - - if(!priv->cfg->request_firmware) { + if (!priv->cfg->request_firmware) { printk(KERN_ERR "xc5000: no firmware callback, fatal\n"); return -EIO; } + /* request the firmware, this will block and timeout */ + printk(KERN_INFO "xc5000: waiting for firmware upload (%s)...\n", + XC5000_DEFAULT_FIRMWARE); + ret = priv->cfg->request_firmware(fe, &fw, XC5000_DEFAULT_FIRMWARE); if (ret) { printk(KERN_ERR "xc5000: Upload failed. (file not found?)\n"); @@ -560,7 +537,7 @@ static int xc5000_fwupload(struct dvb_frontend* fe) ret = XC_RESULT_SUCCESS; } - if(fw->size != XC5000_DEFAULT_FIRMWARE_SIZE) { + if (fw->size != XC5000_DEFAULT_FIRMWARE_SIZE) { printk(KERN_ERR "xc5000: firmware incorrect size\n"); ret = XC_RESULT_RESET_FAILURE; } else { @@ -572,89 +549,110 @@ static int xc5000_fwupload(struct dvb_frontend* fe) return ret; } -void xc_debug_dump(struct xc5000_priv *priv) +static void xc_debug_dump(struct xc5000_priv *priv) { - unsigned short adc_envelope; - u32 frequency_error_hz; - unsigned short lock_status; - unsigned char hw_majorversion, hw_minorversion = 0; - unsigned char fw_majorversion, fw_minorversion = 0; - int hsync_freq_hz; - unsigned short frame_lines; - unsigned short quality; + u16 adc_envelope; + u32 freq_error_hz = 0; + u16 lock_status; + u32 hsync_freq_hz = 0; + u16 frame_lines; + u16 quality; + u8 hw_majorversion = 0, hw_minorversion = 0; + u8 fw_majorversion = 0, fw_minorversion = 0; /* Wait for stats to stabilize. * Frame Lines needs two frame times after initial lock * before it is valid. */ - xc_wait( 100 ); + xc_wait(100); - xc_get_ADC_Envelope(priv, &adc_envelope ); - dprintk(1, "*** ADC envelope (0-1023) = %u\n", adc_envelope); + xc_get_ADC_Envelope(priv, &adc_envelope); + dprintk(1, "*** ADC envelope (0-1023) = %d\n", adc_envelope); - xc_get_frequency_error(priv, &frequency_error_hz ); - dprintk(1, "*** Frequency error = %d Hz\n", frequency_error_hz); + xc_get_frequency_error(priv, &freq_error_hz); + dprintk(1, "*** Frequency error = %d Hz\n", freq_error_hz); - xc_get_lock_status(priv, &lock_status ); - dprintk(1, "*** Lock status (0-Wait, 1-Locked, 2-No-signal) = %u\n", + xc_get_lock_status(priv, &lock_status); + dprintk(1, "*** Lock status (0-Wait, 1-Locked, 2-No-signal) = %d\n", lock_status); xc_get_version(priv, &hw_majorversion, &hw_minorversion, - &fw_majorversion, &fw_minorversion ); + &fw_majorversion, &fw_minorversion); dprintk(1, "*** HW: V%02x.%02x, FW: V%02x.%02x\n", hw_majorversion, hw_minorversion, fw_majorversion, fw_minorversion); - xc_get_hsync_freq(priv, &hsync_freq_hz ); - dprintk(1, "*** Horizontal sync frequency = %u Hz\n", hsync_freq_hz); + xc_get_hsync_freq(priv, &hsync_freq_hz); + dprintk(1, "*** Horizontal sync frequency = %d Hz\n", hsync_freq_hz); - xc_get_frame_lines(priv, &frame_lines ); - dprintk(1, "*** Frame lines = %u\n", frame_lines); + xc_get_frame_lines(priv, &frame_lines); + dprintk(1, "*** Frame lines = %d\n", frame_lines); - xc_get_quality(priv, &quality ); - dprintk(1, "*** Quality (0:<8dB, 7:>56dB) = %u\n", quality); + xc_get_quality(priv, &quality); + dprintk(1, "*** Quality (0:<8dB, 7:>56dB) = %d\n", quality); } static int xc5000_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) { struct xc5000_priv *priv = fe->tuner_priv; + int ret; - dprintk(1, "%s() frequency=%d\n", __FUNCTION__, params->frequency); + dprintk(1, "%s() frequency=%d (Hz)\n", __FUNCTION__, params->frequency); - priv->frequency = params->frequency - 1750000; - priv->bandwidth = 6; - priv->video_standard = DTV6; switch(params->u.vsb.modulation) { case VSB_8: case VSB_16: dprintk(1, "%s() VSB modulation\n", __FUNCTION__); priv->rf_mode = XC_RF_MODE_AIR; + priv->freq_hz = params->frequency - 1750000; + priv->bandwidth = BANDWIDTH_6_MHZ; + priv->video_standard = DTV6; break; case QAM_64: case QAM_256: case QAM_AUTO: dprintk(1, "%s() QAM modulation\n", __FUNCTION__); priv->rf_mode = XC_RF_MODE_CABLE; + priv->freq_hz = params->frequency - 1750000; + priv->bandwidth = BANDWIDTH_6_MHZ; + priv->video_standard = DTV6; break; default: return -EINVAL; } dprintk(1, "%s() frequency=%d (compensated)\n", - __FUNCTION__, priv->frequency); + __FUNCTION__, priv->freq_hz); - /* FIXME: check result codes */ - xc_SetSignalSource(priv, priv->rf_mode); + ret = xc_SetSignalSource(priv, priv->rf_mode); + if (ret != XC_RESULT_SUCCESS) { + printk(KERN_ERR + "xc5000: xc_SetSignalSource(%d) failed\n", + priv->rf_mode); + return -EREMOTEIO; + } - xc_SetTVStandard(priv, + ret = xc_SetTVStandard(priv, XC5000_Standard[priv->video_standard].VideoMode, XC5000_Standard[priv->video_standard].AudioMode); + if (ret != XC_RESULT_SUCCESS) { + printk(KERN_ERR "xc5000: xc_SetTVStandard failed\n"); + return -EREMOTEIO; + } + + ret = xc_set_IF_frequency(priv, priv->cfg->if_khz); + if (ret != XC_RESULT_SUCCESS) { + printk(KERN_ERR "xc5000: xc_Set_IF_frequency(%d) failed\n", + priv->cfg->if_khz); + return -EIO; + } + + xc_tune_channel(priv, priv->freq_hz); - xc_set_IF_frequency(priv, priv->cfg->if_frequency); - xc_tune_channel(priv, priv->frequency); - xc_debug_dump(priv); + if (debug) + xc_debug_dump(priv); return 0; } @@ -663,7 +661,7 @@ static int xc5000_get_frequency(struct dvb_frontend *fe, u32 *freq) { struct xc5000_priv *priv = fe->tuner_priv; dprintk(1, "%s()\n", __FUNCTION__); - *freq = priv->frequency; + *freq = priv->freq_hz; return 0; } @@ -678,7 +676,7 @@ static int xc5000_get_bandwidth(struct dvb_frontend *fe, u32 *bw) static int xc5000_get_status(struct dvb_frontend *fe, u32 *status) { struct xc5000_priv *priv = fe->tuner_priv; - unsigned short int lock_status = 0; + u16 lock_status = 0; xc_get_lock_status(priv, &lock_status); @@ -689,15 +687,15 @@ static int xc5000_get_status(struct dvb_frontend *fe, u32 *status) return 0; } -int xc_load_fw_and_init_tuner(struct dvb_frontend *fe) +static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe) { struct xc5000_priv *priv = fe->tuner_priv; int ret; - if(priv->fwloaded == 0) { + if (priv->fwloaded == 0) { ret = xc5000_fwupload(fe); - if( ret != XC_RESULT_SUCCESS ) - return -EREMOTEIO; + if (ret != XC_RESULT_SUCCESS) + return ret; priv->fwloaded = 1; } @@ -718,13 +716,26 @@ int xc_load_fw_and_init_tuner(struct dvb_frontend *fe) return ret; } +static int xc5000_sleep(struct dvb_frontend *fe) +{ + struct xc5000_priv *priv = fe->tuner_priv; + dprintk(1, "%s()\n", __FUNCTION__); + + return xc_shutdown(priv); +} + static int xc5000_init(struct dvb_frontend *fe) { struct xc5000_priv *priv = fe->tuner_priv; dprintk(1, "%s()\n", __FUNCTION__); - xc_load_fw_and_init_tuner(fe); - xc_debug_dump(priv); + if (xc_load_fw_and_init_tuner(fe) != XC_RESULT_SUCCESS) { + printk(KERN_ERR "xc5000: Unable to initialise tuner\n"); + return -EREMOTEIO; + } + + if (debug) + xc_debug_dump(priv); return 0; } @@ -747,6 +758,7 @@ static const struct dvb_tuner_ops xc5000_tuner_ops = { .release = xc5000_release, .init = xc5000_init, + .sleep = xc5000_sleep, .set_params = xc5000_set_params, .get_frequency = xc5000_get_frequency, @@ -768,7 +780,7 @@ struct dvb_frontend * xc5000_attach(struct dvb_frontend *fe, return NULL; priv->cfg = cfg; - priv->bandwidth = 6000000; /* 6MHz */ + priv->bandwidth = BANDWIDTH_6_MHZ; priv->i2c = i2c; priv->fwloaded = 0; @@ -777,7 +789,7 @@ struct dvb_frontend * xc5000_attach(struct dvb_frontend *fe, return NULL; } - if ( (id != 0x2000) && (id != 0x1388) ) { + if ((id != 0x2000) && (id != 0x1388)) { printk(KERN_ERR "xc5000: Device not found at addr 0x%02x (0x%x)\n", cfg->i2c_address, id); @@ -798,5 +810,5 @@ struct dvb_frontend * xc5000_attach(struct dvb_frontend *fe, EXPORT_SYMBOL(xc5000_attach); MODULE_AUTHOR("Steven Toth"); -MODULE_DESCRIPTION("Xceive XC5000 silicon tuner driver"); +MODULE_DESCRIPTION("Xceive xc5000 silicon tuner driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/xc5000.h b/drivers/media/dvb/frontends/xc5000.h index ce5a3212f8f4..9286a03822c1 100644 --- a/drivers/media/dvb/frontends/xc5000.h +++ b/drivers/media/dvb/frontends/xc5000.h @@ -29,8 +29,9 @@ struct i2c_adapter; struct xc5000_config { u8 i2c_address; - u32 if_frequency; - int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name); + u32 if_khz; + int (*request_firmware)(struct dvb_frontend *fe, + const struct firmware **fw, char *name); int (*tuner_reset)(struct dvb_frontend* fe); }; diff --git a/drivers/media/dvb/frontends/xc5000_priv.h b/drivers/media/dvb/frontends/xc5000_priv.h index a2b54535db0f..13b2d19341da 100644 --- a/drivers/media/dvb/frontends/xc5000_priv.h +++ b/drivers/media/dvb/frontends/xc5000_priv.h @@ -26,11 +26,10 @@ struct xc5000_priv { struct xc5000_config *cfg; struct i2c_adapter *i2c; - u32 frequency; + u32 freq_hz; u32 bandwidth; u8 video_standard; u8 rf_mode; - u8 fwloaded; }; diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 5fa65ef08bfd..f0882dd30d3f 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -146,10 +146,10 @@ static struct s5h1409_config hauppauge_hvr1500q_config = { }; static struct xc5000_config hauppauge_hvr1500q_tunerconfig = { - .i2c_address = 0x61, - .if_frequency = 4570000, + .i2c_address = 0x61, + .if_khz = 5380, .request_firmware = cx23885_request_firmware, - .tuner_reset = hauppauge_hvr1500q_tuner_reset + .tuner_reset = hauppauge_hvr1500q_tuner_reset }; static int dvb_register(struct cx23885_tsport *port) -- cgit v1.2.3-59-g8ed1b From 6df9366857335c6406659ce31554b103a00c3b96 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 20 Dec 2007 01:17:15 -0300 Subject: V4L/DVB (6887): Avoid 'unknown model' message for the HVR1500-Q Avoid 'unknown model' message for the HVR1500-Q Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/cx23885-cards.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 515f415564d5..d40232cda462 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -194,6 +194,7 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) { case 76601: /* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual channel ATSC and MPEG2 HW Encoder */ case 77001: /* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC and Basic analog */ + case 77041: /* WinTV-HVR1500Q (Express Card, Retail, No IR, ATSC/QAM and Basic analog */ case 78501: /* WinTV-HVR1800 (PCIe, Retail, IR, Dual channel ATSC and MPEG2 HW Encoder */ case 78521: /* WinTV-HVR1800 (PCIe, Retail, IR, Dual channel ATSC and MPEG2 HW Encoder */ break; -- cgit v1.2.3-59-g8ed1b From 2800b439e090aa06194dbbfb939cd259b74c42a3 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 20 Dec 2007 01:20:38 -0300 Subject: V4L/DVB (6888): Add Hauppauge tuner type 150 defintion Add Hauppauge tuner type 150 defintion. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tveeprom.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c index 11c15787e25f..0b8fbad3c721 100644 --- a/drivers/media/video/tveeprom.c +++ b/drivers/media/video/tveeprom.c @@ -260,6 +260,8 @@ hauppauge_tuner[] = { TUNER_ABSENT, "TCL M09WPP_4N_E"}, { TUNER_ABSENT, "MaxLinear MXL5005_v2"}, { TUNER_PHILIPS_TDA8290, "Philips 18271_8295"}, + /* 150-159 */ + { TUNER_ABSENT, "Xceive XC5000"}, }; static struct HAUPPAUGE_AUDIOIC -- cgit v1.2.3-59-g8ed1b From 26501a703d9eca3b42d793d2e2553c33744097b9 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Fri, 21 Dec 2007 14:28:46 -0300 Subject: V4L/DVB (6890): tda18271: fix typo in RF tracking filter calibration We want to set bits 1 & 2 on easy programming byte 4, not extended byte 4. Thanks to David Wong for pointing this out. Signed-off-by: Michael Krufky Cc: David Wong Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index 3c0f06e1f47d..8eaeb057282a 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -406,7 +406,7 @@ static int tda18271_tune(struct dvb_frontend *fe, tda18271_write_regs(fe, R_EB20, 1); /* set CAL mode to RF tracking filter calibration */ - regs[R_EB4] |= 0x03; + regs[R_EP4] |= 0x03; /* calculate CAL PLL */ -- cgit v1.2.3-59-g8ed1b From fb6d8e2c7fe1667d8ce057e333b18deb91191be5 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Fri, 21 Dec 2007 16:00:45 -0300 Subject: V4L/DVB (6892): xc5000: fix build when DVB_TUNER_XC5000 is disabled Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/xc5000.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/frontends/xc5000.h b/drivers/media/dvb/frontends/xc5000.h index 9286a03822c1..941b31948133 100644 --- a/drivers/media/dvb/frontends/xc5000.h +++ b/drivers/media/dvb/frontends/xc5000.h @@ -42,7 +42,7 @@ extern struct dvb_frontend* xc5000_attach(struct dvb_frontend *fe, #else static inline struct dvb_frontend* xc5000_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, - struct xc5000_config *cfg); + struct xc5000_config *cfg) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); return NULL; -- cgit v1.2.3-59-g8ed1b From 7972f9880c8c812332a56da7cfa4523d01ea310b Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Fri, 21 Dec 2007 16:12:09 -0300 Subject: V4L/DVB (6893): tuner-xc2028: fix xc2028_attach function xc2028_attach was returning an integer when disabled from the build, where it should instead be returning NULL. Declare xc2028_attach as type dvb_frontend * instead of void *. The prototype declaration must be marked as extern in the header. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-xc2028.c | 3 ++- drivers/media/video/tuner-xc2028.h | 9 +++++---- 2 files changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/media/video/tuner-xc2028.c b/drivers/media/video/tuner-xc2028.c index 5ed12e2272e9..ddd94f1d6a6f 100644 --- a/drivers/media/video/tuner-xc2028.c +++ b/drivers/media/video/tuner-xc2028.c @@ -1140,7 +1140,8 @@ static const struct dvb_tuner_ops xc2028_dvb_tuner_ops = { }; -void *xc2028_attach(struct dvb_frontend *fe, struct xc2028_config *cfg) +struct dvb_frontend *xc2028_attach(struct dvb_frontend *fe, + struct xc2028_config *cfg) { struct xc2028_data *priv; void *video_dev; diff --git a/drivers/media/video/tuner-xc2028.h b/drivers/media/video/tuner-xc2028.h index 7462629b98fd..3eb8420379a4 100644 --- a/drivers/media/video/tuner-xc2028.h +++ b/drivers/media/video/tuner-xc2028.h @@ -48,14 +48,15 @@ struct xc2028_config { #define XC2028_RESET_CLK 1 #if defined(CONFIG_TUNER_XC2028) || (defined(CONFIG_TUNER_XC2028_MODULE) && defined(MODULE)) -void *xc2028_attach(struct dvb_frontend *fe, struct xc2028_config *cfg); +extern struct dvb_frontend *xc2028_attach(struct dvb_frontend *fe, + struct xc2028_config *cfg); #else -void *xc2028_attach(struct dvb_frontend *fe, - struct xc2028_config *cfg) +static inline struct dvb_frontend *xc2028_attach(struct dvb_frontend *fe, + struct xc2028_config *cfg) { printk(KERN_INFO "%s: not probed - driver disabled by Kconfig\n", __FUNCTION__); - return -EINVAL; + return NULL; } #endif -- cgit v1.2.3-59-g8ed1b From 3f51451b516eeb19d3c1ea311ee8845fc80b5135 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Fri, 21 Dec 2007 16:20:23 -0300 Subject: V4L/DVB (6894): xc5000: fix build warning Fix the following build warning: xc5000.c:560: warning: format '%d' expects type 'int', but argument 2 has type 'size_t' On many architectrues size_t is unsigned long, and may not be printed with %d. Use %Zu instead. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/xc5000.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/frontends/xc5000.c b/drivers/media/dvb/frontends/xc5000.c index 9edd07115395..106004e12459 100644 --- a/drivers/media/dvb/frontends/xc5000.c +++ b/drivers/media/dvb/frontends/xc5000.c @@ -533,7 +533,8 @@ static int xc5000_fwupload(struct dvb_frontend* fe) printk(KERN_ERR "xc5000: Upload failed. (file not found?)\n"); ret = XC_RESULT_RESET_FAILURE; } else { - printk(KERN_INFO "xc5000: firmware read %d bytes.\n", fw->size); + printk(KERN_INFO "xc5000: firmware read %Zu bytes.\n", + fw->size); ret = XC_RESULT_SUCCESS; } -- cgit v1.2.3-59-g8ed1b From 0e614cd1a5a09b36a3b6d0fff8a08a97800d3cce Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 21 Dec 2007 21:33:36 -0300 Subject: V4L/DVB (6896): ivtv: add XC2028 support for Club3D cards Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-cards.c | 18 ++++++++---------- drivers/media/video/ivtv/ivtv-driver.c | 19 ++++++++++++++----- drivers/media/video/ivtv/ivtv-driver.h | 1 - drivers/media/video/ivtv/ivtv-gpio.c | 24 ++++++++++++++++++++++++ drivers/media/video/ivtv/ivtv-i2c.c | 4 ++-- 5 files changed, 48 insertions(+), 18 deletions(-) diff --git a/drivers/media/video/ivtv/ivtv-cards.c b/drivers/media/video/ivtv/ivtv-cards.c index 26322e933999..f23c6b8d6911 100644 --- a/drivers/media/video/ivtv/ivtv-cards.c +++ b/drivers/media/video/ivtv/ivtv-cards.c @@ -880,7 +880,7 @@ static const struct ivtv_card ivtv_card_pg600v2 = { .hw_video = IVTV_HW_CX25840, .hw_audio = IVTV_HW_CX25840, .hw_audio_ctrl = IVTV_HW_CX25840, - .hw_all = IVTV_HW_CX25840 | IVTV_HW_TUNER, + .hw_all = IVTV_HW_CX25840, .video_inputs = { { IVTV_CARD_INPUT_SVIDEO1, 0, CX25840_SVIDEO_LUMA3 | CX25840_SVIDEO_CHROMA4 }, @@ -889,9 +889,6 @@ static const struct ivtv_card ivtv_card_pg600v2 = { .audio_inputs = { { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL }, }, - .tuners = { - { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, - }, .pci_list = ivtv_pci_pg600v2, .i2c = &ivtv_i2c_std, }; @@ -914,13 +911,17 @@ static const struct ivtv_card ivtv_card_club3d = { .hw_audio_ctrl = IVTV_HW_CX25840, .hw_all = IVTV_HW_CX25840 | IVTV_HW_TUNER, .video_inputs = { - { IVTV_CARD_INPUT_SVIDEO1, 0, + { IVTV_CARD_INPUT_VID_TUNER, 0, CX25840_COMPOSITE2 }, + { IVTV_CARD_INPUT_SVIDEO1, 1, CX25840_SVIDEO_LUMA3 | CX25840_SVIDEO_CHROMA4 }, - { IVTV_CARD_INPUT_COMPOSITE1, 0, CX25840_COMPOSITE3 }, + { IVTV_CARD_INPUT_COMPOSITE1, 1, CX25840_COMPOSITE3 }, }, .audio_inputs = { + { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO5 }, { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL }, }, + .radio_input = { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO5 }, + .gpio_init = { .direction = 0x1000, .initial_value = 0x1000 }, /* tuner reset */ .tuners = { { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, }, @@ -944,7 +945,7 @@ static const struct ivtv_card ivtv_card_avertv_mce116 = { .hw_video = IVTV_HW_CX25840, .hw_audio = IVTV_HW_CX25840, .hw_audio_ctrl = IVTV_HW_CX25840, - .hw_all = IVTV_HW_CX25840 | IVTV_HW_TUNER | IVTV_HW_WM8739, + .hw_all = IVTV_HW_CX25840 | IVTV_HW_WM8739, .video_inputs = { { IVTV_CARD_INPUT_SVIDEO1, 0, CX25840_SVIDEO3 }, { IVTV_CARD_INPUT_COMPOSITE1, 0, CX25840_COMPOSITE1 }, @@ -953,9 +954,6 @@ static const struct ivtv_card ivtv_card_avertv_mce116 = { { IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL, 1 }, }, .gpio_init = { .direction = 0xe000, .initial_value = 0x4000 }, /* enable line-in */ - .tuners = { - { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, - }, .pci_list = ivtv_pci_avertv_mce116, .i2c = &ivtv_i2c_std, }; diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index 2765624b230f..0cb832a21357 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -59,6 +59,7 @@ #include #include #include +#include "tuner-xc2028.h" /* var to keep track of the number of array elements in use */ int ivtv_cards_active = 0; @@ -844,11 +845,6 @@ static void ivtv_load_and_init_modules(struct ivtv *itv) unsigned i; /* load modules */ - if ((hw & IVTV_HW_TUNER) && itv->options.tuner == TUNER_XC2028) { - IVTV_INFO("Xceive tuner not yet supported, only composite\n"); - IVTV_INFO("and S-Video inputs will be available\n"); - hw &= ~IVTV_HW_TUNER; - } #ifndef CONFIG_VIDEO_TUNER hw = ivtv_request_module(itv, hw, "tuner", IVTV_HW_TUNER); #endif @@ -1150,7 +1146,20 @@ static int __devinit ivtv_probe(struct pci_dev *dev, setup.addr = ADDR_UNSET; setup.type = itv->options.tuner; setup.mode_mask = T_ANALOG_TV; /* matches TV tuners */ + setup.tuner_callback = (setup.type == TUNER_XC2028) ? + ivtv_reset_tuner_gpio : NULL; ivtv_call_i2c_clients(itv, TUNER_SET_TYPE_ADDR, &setup); + if (setup.type == TUNER_XC2028) { + static struct xc2028_ctrl ctrl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + }; + struct v4l2_priv_tun_config cfg = { + .tuner = itv->options.tuner, + .priv = &ctrl, + }; + ivtv_call_i2c_clients(itv, TUNER_SET_CONFIG, &cfg); + } } /* The tuner is fixed to the standard. The other inputs (e.g. S-Video) diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h index 8eeea3a0c700..536140f0c19e 100644 --- a/drivers/media/video/ivtv/ivtv-driver.h +++ b/drivers/media/video/ivtv/ivtv-driver.h @@ -65,7 +65,6 @@ #include - /* Memory layout */ #define IVTV_ENCODER_OFFSET 0x00000000 #define IVTV_ENCODER_SIZE 0x00800000 /* Total size is 0x01000000, but only first half is used */ diff --git a/drivers/media/video/ivtv/ivtv-gpio.c b/drivers/media/video/ivtv/ivtv-gpio.c index 132fb5f71366..688cd3856685 100644 --- a/drivers/media/video/ivtv/ivtv-gpio.c +++ b/drivers/media/video/ivtv/ivtv-gpio.c @@ -22,6 +22,7 @@ #include "ivtv-driver.h" #include "ivtv-cards.h" #include "ivtv-gpio.h" +#include "tuner-xc2028.h" #include /* @@ -122,6 +123,29 @@ void ivtv_reset_ir_gpio(struct ivtv *itv) write_reg(curdir, IVTV_REG_GPIO_DIR); } +/* Xceive tuner reset function */ +int ivtv_reset_tuner_gpio(void *dev, int cmd, int value) +{ + struct i2c_algo_bit_data *algo = dev; + struct ivtv *itv = algo->data; + int curdir, curout; + + if (cmd != XC2028_TUNER_RESET) + return 0; + IVTV_DEBUG_INFO("Resetting tuner\n"); + curout = read_reg(IVTV_REG_GPIO_OUT); + curdir = read_reg(IVTV_REG_GPIO_DIR); + curdir |= (1 << 12); /* GPIO bit 12 */ + + curout &= ~(1 << 12); + write_reg(curout, IVTV_REG_GPIO_OUT); + schedule_timeout_interruptible(msecs_to_jiffies(1)); + + curout |= (1 << 12); + write_reg(curout, IVTV_REG_GPIO_OUT); + schedule_timeout_interruptible(msecs_to_jiffies(1)); + return 0; +} void ivtv_gpio_init(struct ivtv *itv) { diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c index 9acfde68116a..efd4a1324dc5 100644 --- a/drivers/media/video/ivtv/ivtv-i2c.c +++ b/drivers/media/video/ivtv/ivtv-i2c.c @@ -777,9 +777,9 @@ int init_ivtv_i2c(struct ivtv *itv) sizeof(struct i2c_adapter)); memcpy(&itv->i2c_algo, &ivtv_i2c_algo_template, sizeof(struct i2c_algo_bit_data)); - itv->i2c_algo.data = itv; - itv->i2c_adap.algo_data = &itv->i2c_algo; } + itv->i2c_algo.data = itv; + itv->i2c_adap.algo_data = &itv->i2c_algo; sprintf(itv->i2c_adap.name + strlen(itv->i2c_adap.name), " #%d", itv->num); -- cgit v1.2.3-59-g8ed1b From ef207feddf826f099562b239543c447e68991b84 Mon Sep 17 00:00:00 2001 From: Chris Pascoe Date: Sun, 2 Dec 2007 09:30:55 -0300 Subject: V4L/DVB (6897): xc2028: ignore HAS_IF during specific S-Code type searches If we are selecting the S-Code firmware to load by name, then we must mask off the HAS_IF bit during the search. Signed-off-by: Chris Pascoe Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-xc2028.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/tuner-xc2028.c b/drivers/media/video/tuner-xc2028.c index ddd94f1d6a6f..1817bf67dad1 100644 --- a/drivers/media/video/tuner-xc2028.c +++ b/drivers/media/video/tuner-xc2028.c @@ -395,6 +395,7 @@ static int seek_firmware(struct dvb_frontend *fe, unsigned int type, { struct xc2028_data *priv = fe->tuner_priv; int i, best_i = -1, best_nr_matches = 0; + unsigned int ign_firm_type_mask = 0; tuner_dbg("%s called, want type=", __FUNCTION__); if (debug) { @@ -412,16 +413,18 @@ static int seek_firmware(struct dvb_frontend *fe, unsigned int type, if (type & BASE) type &= BASE_TYPES; - else if (type & SCODE) + else if (type & SCODE) { type &= SCODE_TYPES; - else if (type & DTV_TYPES) + ign_firm_type_mask = HAS_IF; + } else if (type & DTV_TYPES) type &= DTV_TYPES; else if (type & STD_SPECIFIC_TYPES) type &= STD_SPECIFIC_TYPES; /* Seek for exact match */ for (i = 0; i < priv->firm_size; i++) { - if ((type == priv->firm[i].type) && (*id == priv->firm[i].id)) + if ((type == (priv->firm[i].type & ~ign_firm_type_mask)) && + (*id == priv->firm[i].id)) goto found; } @@ -430,7 +433,7 @@ static int seek_firmware(struct dvb_frontend *fe, unsigned int type, v4l2_std_id match_mask; int nr_matches; - if (type != priv->firm[i].type) + if (type != (priv->firm[i].type & ~ign_firm_type_mask)) continue; match_mask = *id & priv->firm[i].id; -- cgit v1.2.3-59-g8ed1b From 07b4a835d42d6d59e84cbafdc8b7090f97d7b67a Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Tue, 18 Dec 2007 01:09:11 -0300 Subject: V4L/DVB (6898): cx23885: add support for Hauppauge WinTV HVR-1500 Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.cx23885 | 1 + drivers/media/video/cx23885/cx23885-cards.c | 24 ++++++++++- drivers/media/video/cx23885/cx23885-dvb.c | 65 +++++++++++++++++++++++++++++ drivers/media/video/cx23885/cx23885.h | 1 + 4 files changed, 90 insertions(+), 1 deletion(-) diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885 index 54d06e4ff743..698971d23f4e 100644 --- a/Documentation/video4linux/CARDLIST.cx23885 +++ b/Documentation/video4linux/CARDLIST.cx23885 @@ -4,3 +4,4 @@ 3 -> Hauppauge WinTV-HVR1250 [0070:7911] 4 -> DViCO FusionHDTV5 Express [18ac:d500] 5 -> Hauppauge WinTV-HVR1500Q [0070:7797] + 6 -> Hauppauge WinTV-HVR1500 [0070:7717] diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index d40232cda462..e11fa10a13a6 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -117,7 +117,10 @@ struct cx23885_board cx23885_boards[] = { .name = "Hauppauge WinTV-HVR1500Q", .portc = CX23885_MPEG_DVB, }, - + [CX23885_BOARD_HAUPPAUGE_HVR1500] = { + .name = "Hauppauge WinTV-HVR1500", + .portc = CX23885_MPEG_DVB, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -153,6 +156,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x0070, .subdevice = 0x7797, .card = CX23885_BOARD_HAUPPAUGE_HVR1500Q, + },{ + .subvendor = 0x0070, + .subdevice = 0x7717, + .card = CX23885_BOARD_HAUPPAUGE_HVR1500, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -214,6 +221,18 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) /* GPIO-0 cx24227 demodulator reset */ cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */ break; + case CX23885_BOARD_HAUPPAUGE_HVR1500: + /* GPIO-0 cx24227 demodulator */ + /* GPIO-2 xc3028 tuner */ + + /* Put the parts into reset */ + cx_set(GP0_IO, 0x00050000); + cx_clear(GP0_IO, 0x00000005); + msleep(5); + + /* Bring the parts out of reset */ + cx_set(GP0_IO, 0x00050005); + break; case CX23885_BOARD_HAUPPAUGE_HVR1500Q: /* GPIO-0 cx24227 demodulator reset */ /* GPIO-2 xc5000 tuner reset */ @@ -236,6 +255,7 @@ int cx23885_ir_init(struct cx23885_dev *dev) { switch (dev->board) { case CX23885_BOARD_HAUPPAUGE_HVR1250: + case CX23885_BOARD_HAUPPAUGE_HVR1500: case CX23885_BOARD_HAUPPAUGE_HVR1500Q: case CX23885_BOARD_HAUPPAUGE_HVR1800: /* FIXME: Implement me */ @@ -260,6 +280,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) switch (dev->board) { case CX23885_BOARD_HAUPPAUGE_HVR1250: + case CX23885_BOARD_HAUPPAUGE_HVR1500: case CX23885_BOARD_HAUPPAUGE_HVR1500Q: case CX23885_BOARD_HAUPPAUGE_HVR1800: case CX23885_BOARD_HAUPPAUGE_HVR1800lp: @@ -275,6 +296,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; break; case CX23885_BOARD_HAUPPAUGE_HVR1250: + case CX23885_BOARD_HAUPPAUGE_HVR1500: case CX23885_BOARD_HAUPPAUGE_HVR1500Q: case CX23885_BOARD_HAUPPAUGE_HVR1800: case CX23885_BOARD_HAUPPAUGE_HVR1800lp: diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index f0882dd30d3f..c1309118ea87 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -35,6 +35,8 @@ #include "lgdt330x.h" #include "xc5000.h" #include "dvb-pll.h" +#include "tuner-xc2028.h" +#include "tuner-xc2028-types.h" static unsigned int debug = 0; @@ -126,6 +128,14 @@ static struct s5h1409_config hauppauge_hvr1800lp_config = { .status_mode = S5H1409_DEMODLOCKING }; +static struct s5h1409_config hauppauge_hvr1500_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_SERIAL_OUTPUT, + .gpio = S5H1409_GPIO_OFF, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING +}; + static struct mt2131_config hauppauge_generic_tunerconfig = { 0x61 }; @@ -152,6 +162,36 @@ static struct xc5000_config hauppauge_hvr1500q_tunerconfig = { .tuner_reset = hauppauge_hvr1500q_tuner_reset }; +static int cx23885_hvr1500_xc3028_callback(void *ptr, int command, int arg) +{ + struct cx23885_tsport *port = ptr; + struct cx23885_dev *dev = port->dev; + + switch (command) { + case XC2028_TUNER_RESET: + /* Send the tuner in then out of reset */ + /* GPIO-2 xc3028 tuner */ + dprintk(1, "%s: XC2028_TUNER_RESET %d\n", __FUNCTION__, arg); + + cx_set(GP0_IO, 0x00040000); + cx_clear(GP0_IO, 0x00000004); + msleep(5); + + cx_set(GP0_IO, 0x00040004); + msleep(5); + break; + case XC2028_RESET_CLK: + dprintk(1, "%s: XC2028_RESET_CLK %d\n", __FUNCTION__, arg); + break; + default: + dprintk(1, "%s: unknown command %d, arg %d\n", __FUNCTION__, + command, arg); + return -EINVAL; + } + + return 0; +} + static int dvb_register(struct cx23885_tsport *port) { struct cx23885_dev *dev = port->dev; @@ -206,6 +246,31 @@ static int dvb_register(struct cx23885_tsport *port) &hauppauge_hvr1500q_tunerconfig); } break; + case CX23885_BOARD_HAUPPAUGE_HVR1500: + i2c_bus = &dev->i2c_bus[1]; + port->dvb.frontend = dvb_attach(s5h1409_attach, + &hauppauge_hvr1500_config, + &dev->i2c_bus[0].i2c_adap); + if (port->dvb.frontend != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &i2c_bus->i2c_adap, + .i2c_addr = 0x61, + .video_dev = port, + .callback = cx23885_hvr1500_xc3028_callback, + }; + static struct xc2028_ctrl ctl = { + .fname = "xc3028-v27.fw", + .max_len = 64, + .scode_table = OREN538, + }; + + fe = dvb_attach(xc2028_attach, + port->dvb.frontend, &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctl); + } + break; default: printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n", dev->name); diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index 3f019f3cb292..974ec14782d7 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -54,6 +54,7 @@ #define CX23885_BOARD_HAUPPAUGE_HVR1250 3 #define CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP 4 #define CX23885_BOARD_HAUPPAUGE_HVR1500Q 5 +#define CX23885_BOARD_HAUPPAUGE_HVR1500 6 enum cx23885_itype { CX23885_VMUX_COMPOSITE1 = 1, -- cgit v1.2.3-59-g8ed1b From 4cd8a7bd65a29c5b7833de177622cb2534d5e868 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 22 Dec 2007 16:59:08 -0300 Subject: V4L/DVB (6899): Kconfig: VIDEO_CX23885 must select TUNER_XC2028 if !DVB_FE_CUSTOMIZE Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig index 081ee6e1536f..30c48b6262d1 100644 --- a/drivers/media/video/cx23885/Kconfig +++ b/drivers/media/video/cx23885/Kconfig @@ -12,6 +12,7 @@ config VIDEO_CX23885 select DVB_S5H1409 if !DVB_FE_CUSTOMISE select DVB_LGDT330X if !DVB_FE_CUSTOMISE select DVB_PLL if !DVB_FE_CUSTOMISE + select TUNER_XC2028 if !DVB_FE_CUSTOMIZE ---help--- This is a video4linux driver for Conexant 23885 based TV cards. -- cgit v1.2.3-59-g8ed1b From 3ba71d2194500d1a9fef1b8491b9e0c168e7d46e Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Fri, 7 Dec 2007 01:40:36 -0300 Subject: V4L/DVB (6900): cx23885: enable EZ-QAM mode for Hauppauge WinTV HVR-1800 Add module option 'alt_tuner' disabled by default. When set to one, the dvb_frontend of HVR1800 will consist of: s5h1409 demod + tda18271 tuner When set zero (default), the dvb_frontend of HVR1800 will consist of: s5h1409 demod + mt2131 tuner If the tda18271 is used in digital mode, you will not be able to tune an analog channel at the same time. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/cx23885-cards.c | 3 +- drivers/media/video/cx23885/cx23885-dvb.c | 47 ++++++++++++++++++++++++++++- 2 files changed, 48 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index e11fa10a13a6..fbf93c63dcaa 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -246,7 +246,8 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) /* GPIO-11-14 cx23417 addr0-3 */ /* GPIO-15-18 cx23417 READY, CS, RD, WR */ /* GPIO-19 IR_RX */ - // FIXME: Analog requires the tuner is brought out of reset + + cx_set(GP0_IO, 0x00040004); /* Bring the tuner out of reset */ break; } } diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index c1309118ea87..0f7e9dfcd73f 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -32,6 +32,7 @@ #include "s5h1409.h" #include "mt2131.h" +#include "tda8290.h" #include "lgdt330x.h" #include "xc5000.h" #include "dvb-pll.h" @@ -45,6 +46,12 @@ static unsigned int debug = 0; /* ------------------------------------------------------------------ */ +static unsigned int alt_tuner; +module_param(alt_tuner, int, 0644); +MODULE_PARM_DESC(alt_tuner, "Enable alternate tuner configuration"); + +/* ------------------------------------------------------------------ */ + static int dvb_buf_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size) { @@ -119,6 +126,15 @@ static struct s5h1409_config hauppauge_generic_config = { .status_mode = S5H1409_DEMODLOCKING }; +static struct s5h1409_config hauppauge_ezqam_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_SERIAL_OUTPUT, + .gpio = S5H1409_GPIO_OFF, + .qam_if = 4000, + .inversion = S5H1409_INVERSION_ON, + .status_mode = S5H1409_DEMODLOCKING +}; + static struct s5h1409_config hauppauge_hvr1800lp_config = { .demod_address = 0x32 >> 1, .output_mode = S5H1409_SERIAL_OUTPUT, @@ -203,7 +219,6 @@ static int dvb_register(struct cx23885_tsport *port) /* init frontend */ switch (dev->board) { case CX23885_BOARD_HAUPPAUGE_HVR1250: - case CX23885_BOARD_HAUPPAUGE_HVR1800: i2c_bus = &dev->i2c_bus[0]; port->dvb.frontend = dvb_attach(s5h1409_attach, &hauppauge_generic_config, @@ -214,6 +229,33 @@ static int dvb_register(struct cx23885_tsport *port) &hauppauge_generic_tunerconfig, 0); } break; + case CX23885_BOARD_HAUPPAUGE_HVR1800: + i2c_bus = &dev->i2c_bus[0]; + switch (alt_tuner) { + case 1: + port->dvb.frontend = + dvb_attach(s5h1409_attach, + &hauppauge_ezqam_config, + &i2c_bus->i2c_adap); + if (port->dvb.frontend != NULL) { + dvb_attach(tda829x_attach, port->dvb.frontend, + &dev->i2c_bus[1].i2c_adap, 0x42, + NULL); + } + break; + case 0: + default: + port->dvb.frontend = + dvb_attach(s5h1409_attach, + &hauppauge_generic_config, + &i2c_bus->i2c_adap); + if (port->dvb.frontend != NULL) + dvb_attach(mt2131_attach, port->dvb.frontend, + &i2c_bus->i2c_adap, + &hauppauge_generic_tunerconfig, 0); + break; + } + break; case CX23885_BOARD_HAUPPAUGE_HVR1800lp: i2c_bus = &dev->i2c_bus[0]; port->dvb.frontend = dvb_attach(s5h1409_attach, @@ -284,6 +326,9 @@ static int dvb_register(struct cx23885_tsport *port) /* Put the analog decoder in standby to keep it quiet */ cx23885_call_i2c_clients(i2c_bus, TUNER_SET_STANDBY, NULL); + if (port->dvb.frontend->ops.analog_ops.standby) + port->dvb.frontend->ops.analog_ops.standby(port->dvb.frontend); + /* register everything */ return videobuf_dvb_register(&port->dvb, THIS_MODULE, port, &dev->pci->dev); -- cgit v1.2.3-59-g8ed1b From 478f42292df86a618afbe3c22d11cf08c036d413 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 22 Dec 2007 17:56:25 -0300 Subject: V4L/DVB (6901): Kconfig: VIDEO_CX23885 selects TUNER_TDA8290 and DVB_TDA18271 Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig index 30c48b6262d1..3393dd6153e9 100644 --- a/drivers/media/video/cx23885/Kconfig +++ b/drivers/media/video/cx23885/Kconfig @@ -13,6 +13,8 @@ config VIDEO_CX23885 select DVB_LGDT330X if !DVB_FE_CUSTOMISE select DVB_PLL if !DVB_FE_CUSTOMISE select TUNER_XC2028 if !DVB_FE_CUSTOMIZE + select TUNER_TDA8290 if !DVB_FE_CUSTOMIZE + select DVB_TDA18271 if !DVB_FE_CUSTOMIZE ---help--- This is a video4linux driver for Conexant 23885 based TV cards. -- cgit v1.2.3-59-g8ed1b From 994fc28b6cd087cf6ef8d3ebd4eeef97c8194e4e Mon Sep 17 00:00:00 2001 From: Matthias Schwarzott Date: Mon, 24 Dec 2007 07:12:55 -0300 Subject: V4L/DVB (6903): mt312: CodingStyle fix Fixes all occurences of assignment in if checkpatch marks them as ERROR. Signed-off-by: Matthias Schwarzott Reviewed-by: Andreas Oberritter Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/mt312.c | 134 ++++++++++++++++++++++-------------- 1 file changed, 83 insertions(+), 51 deletions(-) diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c index 2d68fafc0ef8..1638301fbd6e 100644 --- a/drivers/media/dvb/frontends/mt312.c +++ b/drivers/media/dvb/frontends/mt312.c @@ -152,7 +152,8 @@ static int mt312_get_inversion(struct mt312_state *state, int ret; u8 vit_mode; - if ((ret = mt312_readreg(state, VIT_MODE, &vit_mode)) < 0) + ret = mt312_readreg(state, VIT_MODE, &vit_mode); + if (ret < 0) return ret; if (vit_mode & 0x80) /* auto inversion was used */ @@ -170,15 +171,18 @@ static int mt312_get_symbol_rate(struct mt312_state *state, u32 *sr) u16 monitor; u8 buf[2]; - if ((ret = mt312_readreg(state, SYM_RATE_H, &sym_rate_h)) < 0) + ret = mt312_readreg(state, SYM_RATE_H, &sym_rate_h); + if (ret < 0) return ret; if (sym_rate_h & 0x80) { /* symbol rate search was used */ - if ((ret = mt312_writereg(state, MON_CTRL, 0x03)) < 0) + ret = mt312_writereg(state, MON_CTRL, 0x03); + if (ret < 0) return ret; - if ((ret = mt312_read(state, MONITOR_H, buf, sizeof(buf))) < 0) + ret = mt312_read(state, MONITOR_H, buf, sizeof(buf)); + if (ret < 0) return ret; monitor = (buf[0] << 8) | buf[1]; @@ -186,16 +190,18 @@ static int mt312_get_symbol_rate(struct mt312_state *state, u32 *sr) dprintk("sr(auto) = %u\n", mt312_div(monitor * 15625, 4)); } else { - if ((ret = mt312_writereg(state, MON_CTRL, 0x05)) < 0) + ret = mt312_writereg(state, MON_CTRL, 0x05); + if (ret < 0) return ret; - if ((ret = mt312_read(state, MONITOR_H, buf, sizeof(buf))) < 0) + ret = mt312_read(state, MONITOR_H, buf, sizeof(buf)); + if (ret < 0) return ret; dec_ratio = ((buf[0] >> 5) & 0x07) * 32; - if ((ret = mt312_read(state, SYM_RAT_OP_H, buf, - sizeof(buf))) < 0) + ret = mt312_read(state, SYM_RAT_OP_H, buf, sizeof(buf)); + if (ret < 0) return ret; sym_rat_op = (buf[0] << 8) | buf[1]; @@ -219,7 +225,8 @@ static int mt312_get_code_rate(struct mt312_state *state, fe_code_rate_t *cr) int ret; u8 fec_status; - if ((ret = mt312_readreg(state, FEC_STATUS, &fec_status)) < 0) + ret = mt312_readreg(state, FEC_STATUS, &fec_status); + if (ret < 0) return ret; *cr = fec_tab[(fec_status >> 4) & 0x07]; @@ -234,15 +241,17 @@ static int mt312_initfe(struct dvb_frontend *fe) u8 buf[2]; /* wake up */ - if ((ret = mt312_writereg(state, CONFIG, - (state->frequency == 60 ? 0x88 : 0x8c))) < 0) + ret = mt312_writereg(state, CONFIG, + (state->frequency == 60 ? 0x88 : 0x8c)); + if (ret < 0) return ret; /* wait at least 150 usec */ udelay(150); /* full reset */ - if ((ret = mt312_reset(state, 1)) < 0) + ret = mt312_reset(state, 1); + if (ret < 0) return ret; /* Per datasheet, write correct values. 09/28/03 ACCJr. @@ -251,8 +260,8 @@ static int mt312_initfe(struct dvb_frontend *fe) u8 buf_def[8] = { 0x14, 0x12, 0x03, 0x02, 0x01, 0x00, 0x00, 0x00 }; - if ((ret = mt312_write(state, VIT_SETUP, buf_def, - sizeof(buf_def))) < 0) + ret = mt312_write(state, VIT_SETUP, buf_def, sizeof(buf_def)); + if (ret < 0) return ret; } @@ -263,23 +272,28 @@ static int mt312_initfe(struct dvb_frontend *fe) /* DISEQC_RATIO */ buf[1] = mt312_div(MT312_PLL_CLK, 15000 * 4); - if ((ret = mt312_write(state, SYS_CLK, buf, sizeof(buf))) < 0) + ret = mt312_write(state, SYS_CLK, buf, sizeof(buf)); + if (ret < 0) return ret; - if ((ret = mt312_writereg(state, SNR_THS_HIGH, 0x32)) < 0) + ret = mt312_writereg(state, SNR_THS_HIGH, 0x32); + if (ret < 0) return ret; - if ((ret = mt312_writereg(state, OP_CTRL, 0x53)) < 0) + ret = mt312_writereg(state, OP_CTRL, 0x53); + if (ret < 0) return ret; /* TS_SW_LIM */ buf[0] = 0x8c; buf[1] = 0x98; - if ((ret = mt312_write(state, TS_SW_LIM_L, buf, sizeof(buf))) < 0) + ret = mt312_write(state, TS_SW_LIM_L, buf, sizeof(buf)); + if (ret < 0) return ret; - if ((ret = mt312_writereg(state, CS_SW_LIM, 0x69)) < 0) + ret = mt312_writereg(state, CS_SW_LIM, 0x69); + if (ret < 0) return ret; return 0; @@ -295,24 +309,26 @@ static int mt312_send_master_cmd(struct dvb_frontend *fe, if ((c->msg_len == 0) || (c->msg_len > sizeof(c->msg))) return -EINVAL; - if ((ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode)) < 0) + ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode); + if (ret < 0) return ret; - if ((ret = - mt312_write(state, (0x80 | DISEQC_INSTR), c->msg, c->msg_len)) < 0) + ret = mt312_write(state, (0x80 | DISEQC_INSTR), c->msg, c->msg_len); + if (ret < 0) return ret; - if ((ret = - mt312_writereg(state, DISEQC_MODE, - (diseqc_mode & 0x40) | ((c->msg_len - 1) << 3) - | 0x04)) < 0) + ret = mt312_writereg(state, DISEQC_MODE, + (diseqc_mode & 0x40) | ((c->msg_len - 1) << 3) + | 0x04); + if (ret < 0) return ret; /* set DISEQC_MODE[2:0] to zero if a return message is expected */ - if (c->msg[0] & 0x02) - if ((ret = mt312_writereg(state, DISEQC_MODE, - (diseqc_mode & 0x40))) < 0) + if (c->msg[0] & 0x02) { + ret = mt312_writereg(state, DISEQC_MODE, (diseqc_mode & 0x40)); + if (ret < 0) return ret; + } return 0; } @@ -328,12 +344,13 @@ static int mt312_send_burst(struct dvb_frontend *fe, const fe_sec_mini_cmd_t c) if (c > SEC_MINI_B) return -EINVAL; - if ((ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode)) < 0) + ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode); + if (ret < 0) return ret; - if ((ret = - mt312_writereg(state, DISEQC_MODE, - (diseqc_mode & 0x40) | mini_tab[c])) < 0) + ret = mt312_writereg(state, DISEQC_MODE, + (diseqc_mode & 0x40) | mini_tab[c]); + if (ret < 0) return ret; return 0; @@ -350,12 +367,13 @@ static int mt312_set_tone(struct dvb_frontend *fe, const fe_sec_tone_mode_t t) if (t > SEC_TONE_OFF) return -EINVAL; - if ((ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode)) < 0) + ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode); + if (ret < 0) return ret; - if ((ret = - mt312_writereg(state, DISEQC_MODE, - (diseqc_mode & 0x40) | tone_tab[t])) < 0) + ret = mt312_writereg(state, DISEQC_MODE, + (diseqc_mode & 0x40) | tone_tab[t]); + if (ret < 0) return ret; return 0; @@ -380,7 +398,8 @@ static int mt312_read_status(struct dvb_frontend *fe, fe_status_t *s) *s = 0; - if ((ret = mt312_read(state, QPSK_STAT_H, status, sizeof(status))) < 0) + ret = mt312_read(state, QPSK_STAT_H, status, sizeof(status)); + if (ret < 0) return ret; dprintk("QPSK_STAT_H: 0x%02x, QPSK_STAT_L: 0x%02x," @@ -406,7 +425,8 @@ static int mt312_read_ber(struct dvb_frontend *fe, u32 *ber) int ret; u8 buf[3]; - if ((ret = mt312_read(state, RS_BERCNT_H, buf, 3)) < 0) + ret = mt312_read(state, RS_BERCNT_H, buf, 3); + if (ret < 0) return ret; *ber = ((buf[0] << 16) | (buf[1] << 8) | buf[2]) * 64; @@ -423,7 +443,8 @@ static int mt312_read_signal_strength(struct dvb_frontend *fe, u16 agc; s16 err_db; - if ((ret = mt312_read(state, AGC_H, buf, sizeof(buf))) < 0) + ret = mt312_read(state, AGC_H, buf, sizeof(buf)); + if (ret < 0) return ret; agc = (buf[0] << 6) | (buf[1] >> 2); @@ -442,7 +463,8 @@ static int mt312_read_snr(struct dvb_frontend *fe, u16 *snr) int ret; u8 buf[2]; - if ((ret = mt312_read(state, M_SNR_H, &buf, sizeof(buf))) < 0) + ret = mt312_read(state, M_SNR_H, &buf, sizeof(buf)); + if (ret < 0) return ret; *snr = 0xFFFF - ((((buf[0] & 0x7f) << 8) | buf[1]) << 1); @@ -456,7 +478,8 @@ static int mt312_read_ucblocks(struct dvb_frontend *fe, u32 *ubc) int ret; u8 buf[2]; - if ((ret = mt312_read(state, RS_UBC_H, &buf, sizeof(buf))) < 0) + ret = mt312_read(state, RS_UBC_H, &buf, sizeof(buf)); + if (ret < 0) return ret; *ubc = (buf[0] << 8) | buf[1]; @@ -512,14 +535,16 @@ static int mt312_set_frontend(struct dvb_frontend *fe, if ((config_val & 0x0c) == 0x08) { /* We are running 60MHz */ state->frequency = 90; - if ((ret = mt312_initfe(fe)) < 0) + ret = mt312_initfe(fe); + if (ret < 0) return ret; } } else { if ((config_val & 0x0c) == 0x0C) { /* We are running 90MHz */ state->frequency = 60; - if ((ret = mt312_initfe(fe)) < 0) + ret = mt312_initfe(fe); + if (ret < 0) return ret; } } @@ -557,7 +582,8 @@ static int mt312_set_frontend(struct dvb_frontend *fe, /* GO */ buf[4] = 0x01; - if ((ret = mt312_write(state, SYM_RATE_H, buf, sizeof(buf))) < 0) + ret = mt312_write(state, SYM_RATE_H, buf, sizeof(buf)); + if (ret < 0) return ret; mt312_reset(state, 0); @@ -571,13 +597,16 @@ static int mt312_get_frontend(struct dvb_frontend *fe, struct mt312_state *state = fe->demodulator_priv; int ret; - if ((ret = mt312_get_inversion(state, &p->inversion)) < 0) + ret = mt312_get_inversion(state, &p->inversion); + if (ret < 0) return ret; - if ((ret = mt312_get_symbol_rate(state, &p->u.qpsk.symbol_rate)) < 0) + ret = mt312_get_symbol_rate(state, &p->u.qpsk.symbol_rate); + if (ret < 0) return ret; - if ((ret = mt312_get_code_rate(state, &p->u.qpsk.fec_inner)) < 0) + ret = mt312_get_code_rate(state, &p->u.qpsk.fec_inner); + if (ret < 0) return ret; return 0; @@ -601,14 +630,17 @@ static int mt312_sleep(struct dvb_frontend *fe) u8 config; /* reset all registers to defaults */ - if ((ret = mt312_reset(state, 1)) < 0) + ret = mt312_reset(state, 1); + if (ret < 0) return ret; - if ((ret = mt312_readreg(state, CONFIG, &config)) < 0) + ret = mt312_readreg(state, CONFIG, &config); + if (ret < 0) return ret; /* enter standby */ - if ((ret = mt312_writereg(state, CONFIG, config & 0x7f)) < 0) + ret = mt312_writereg(state, CONFIG, config & 0x7f); + if (ret < 0) return ret; return 0; -- cgit v1.2.3-59-g8ed1b From 7e946c8a4242e3ed944cececddd3f2294299ed65 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 24 Dec 2007 03:47:30 -0300 Subject: V4L/DVB (6904): tda18271: divider byte 1, bit 7 is always 0 Bit 7 of both Main Divider byte 1 and Cal Divider byte 1 is always zero. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index 8eaeb057282a..d9994aeeb14f 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -424,7 +424,7 @@ static int tda18271_tune(struct dvb_frontend *fe, regs[R_CPD] = pd; div = ((d * (N / 1000)) << 7) / 125; - regs[R_CD1] = 0xff & (div >> 16); + regs[R_CD1] = 0x7f & (div >> 16); regs[R_CD2] = 0xff & (div >> 8); regs[R_CD3] = 0xff & div; @@ -453,7 +453,7 @@ static int tda18271_tune(struct dvb_frontend *fe, } div = ((d * (N / 1000)) << 7) / 125; - regs[R_MD1] = 0xff & (div >> 16); + regs[R_MD1] = 0x7f & (div >> 16); regs[R_MD2] = 0xff & (div >> 8); regs[R_MD3] = 0xff & div; @@ -567,7 +567,7 @@ static int tda18271_tune(struct dvb_frontend *fe, } div = ((d * (N / 1000)) << 7) / 125; - regs[R_MD1] = 0xff & (div >> 16); + regs[R_MD1] = 0x7f & (div >> 16); regs[R_MD2] = 0xff & (div >> 8); regs[R_MD3] = 0xff & div; -- cgit v1.2.3-59-g8ed1b From 49e7aaf0ff14a270f3c481ab200dcf361c4155a5 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 24 Dec 2007 04:15:20 -0300 Subject: V4L/DVB (6905): tda18271: check ID register during attach Identify the silicon during attach, return NULL if unsupported device. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 40 +++++++++++++++++++++++++++++-- 1 file changed, 38 insertions(+), 2 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index d9994aeeb14f..4a32c2e63719 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -719,6 +719,36 @@ static int tda18271_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) return 0; } +static int tda18271_get_id(struct dvb_frontend *fe) +{ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + char *name; + int ret = 0; + + tda18271_read_regs(fe); + + switch (regs[R_ID] & 0x7f) { + case 3: + name = "TDA18271HD/C1"; + break; + case 4: + name = "TDA18271HD/C2"; + ret = -EPROTONOSUPPORT; + break; + default: + name = "Unknown device"; + ret = -EINVAL; + break; + } + + dbg_info("%s detected @ %d-%04x%s\n", name, + i2c_adapter_id(priv->i2c_adap), priv->i2c_addr, + (0 == ret) ? "" : ", device not supported."); + + return ret; +} + static struct dvb_tuner_ops tda18271_tuner_ops = { .info = { .name = "NXP TDA18271HD", @@ -749,14 +779,20 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, priv->i2c_adap = i2c; priv->gate = gate; + fe->tuner_priv = priv; + + if (tda18271_get_id(fe) < 0) + goto fail; + memcpy(&fe->ops.tuner_ops, &tda18271_tuner_ops, sizeof(struct dvb_tuner_ops)); - fe->tuner_priv = priv; - tda18271_init_regs(fe); return fe; +fail: + tda18271_release(fe); + return NULL; } EXPORT_SYMBOL_GPL(tda18271_attach); MODULE_DESCRIPTION("NXP TDA18271HD analog / digital tuner driver"); -- cgit v1.2.3-59-g8ed1b From f0bd504fb91c8929bfbacbad759a8e3fe572589f Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 24 Dec 2007 04:35:21 -0300 Subject: V4L/DVB (6906): tda18271: rename tda18271_calc_* functions to tda18271_lookup_* Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 18 +++++++++--------- drivers/media/dvb/frontends/tda18271-priv.h | 18 +++++++++--------- drivers/media/dvb/frontends/tda18271-tables.c | 16 ++++++++-------- 3 files changed, 26 insertions(+), 26 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index 4a32c2e63719..4c105853d93c 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -386,7 +386,7 @@ static int tda18271_tune(struct dvb_frontend *fe, /* RF tracking filter calibration */ /* calculate BP_Filter */ - tda18271_calc_bp_filter(&freq, &val); + tda18271_lookup_bp_filter(&freq, &val); regs[R_EP1] &= ~0x07; /* clear bp filter bits */ regs[R_EP1] |= val; @@ -419,7 +419,7 @@ static int tda18271_tune(struct dvb_frontend *fe, break; } - tda18271_calc_cal_pll(&N, &pd, &d); + tda18271_lookup_cal_pll(&N, &pd, &d); regs[R_CPD] = pd; @@ -439,7 +439,7 @@ static int tda18271_tune(struct dvb_frontend *fe, break; } - tda18271_calc_main_pll(&N, &pd, &d); + tda18271_lookup_main_pll(&N, &pd, &d); regs[R_MPD] = (0x7f & pd); @@ -461,20 +461,20 @@ static int tda18271_tune(struct dvb_frontend *fe, msleep(5); /* RF tracking filter calibration initialization */ /* search for K,M,CO for RF Calibration */ - tda18271_calc_km(&freq, &val); + tda18271_lookup_km(&freq, &val); regs[R_EB13] &= 0x83; regs[R_EB13] |= val; tda18271_write_regs(fe, R_EB13, 1); /* search for RF_BAND */ - tda18271_calc_rf_band(&freq, &val); + tda18271_lookup_rf_band(&freq, &val); regs[R_EP2] &= ~0xe0; /* clear rf band bits */ regs[R_EP2] |= (val << 5); /* search for Gain_Taper */ - tda18271_calc_gain_taper(&freq, &val); + tda18271_lookup_gain_taper(&freq, &val); regs[R_EP2] &= ~0x1f; /* clear gain taper bits */ regs[R_EP2] |= val; @@ -502,7 +502,7 @@ static int tda18271_tune(struct dvb_frontend *fe, tda18271_write_regs(fe, R_EP1, 1); /* RF tracking filer correction for VHF_Low band */ - tda18271_calc_rf_cal(&freq, &val); + tda18271_lookup_rf_cal(&freq, &val); /* VHF_Low band only */ if (val != 0) { @@ -546,7 +546,7 @@ static int tda18271_tune(struct dvb_frontend *fe, regs[R_EP4] &= ~0x80; /* turn this bit on only for fm */ /* image rejection validity EP5[2:0] */ - tda18271_calc_ir_measure(&freq, &val); + tda18271_lookup_ir_measure(&freq, &val); regs[R_EP5] &= ~0x07; regs[R_EP5] |= val; @@ -554,7 +554,7 @@ static int tda18271_tune(struct dvb_frontend *fe, /* calculate MAIN PLL */ N = freq + ifc; - tda18271_calc_main_pll(&N, &pd, &d); + tda18271_lookup_main_pll(&N, &pd, &d); regs[R_MPD] = (0x7f & pd); switch (priv->mode) { diff --git a/drivers/media/dvb/frontends/tda18271-priv.h b/drivers/media/dvb/frontends/tda18271-priv.h index d56c2fe3efa2..e1fa9a467939 100644 --- a/drivers/media/dvb/frontends/tda18271-priv.h +++ b/drivers/media/dvb/frontends/tda18271-priv.h @@ -82,15 +82,15 @@ extern int tda18271_debug; /*---------------------------------------------------------------------*/ -extern void tda18271_calc_cal_pll(u32 *freq, u8 *post_div, u8 *div); -extern void tda18271_calc_main_pll(u32 *freq, u8 *post_div, u8 *div); - -extern void tda18271_calc_bp_filter(u32 *freq, u8 *val); -extern void tda18271_calc_km(u32 *freq, u8 *val); -extern void tda18271_calc_rf_band(u32 *freq, u8 *val); -extern void tda18271_calc_gain_taper(u32 *freq, u8 *val); -extern void tda18271_calc_rf_cal(u32 *freq, u8 *val); -extern void tda18271_calc_ir_measure(u32 *freq, u8 *val); +extern void tda18271_lookup_cal_pll(u32 *freq, u8 *post_div, u8 *div); +extern void tda18271_lookup_main_pll(u32 *freq, u8 *post_div, u8 *div); + +extern void tda18271_lookup_bp_filter(u32 *freq, u8 *val); +extern void tda18271_lookup_km(u32 *freq, u8 *val); +extern void tda18271_lookup_rf_band(u32 *freq, u8 *val); +extern void tda18271_lookup_gain_taper(u32 *freq, u8 *val); +extern void tda18271_lookup_rf_cal(u32 *freq, u8 *val); +extern void tda18271_lookup_ir_measure(u32 *freq, u8 *val); #endif /* __TDA18271_PRIV_H__ */ diff --git a/drivers/media/dvb/frontends/tda18271-tables.c b/drivers/media/dvb/frontends/tda18271-tables.c index 65387bb059eb..cce0e0d82233 100644 --- a/drivers/media/dvb/frontends/tda18271-tables.c +++ b/drivers/media/dvb/frontends/tda18271-tables.c @@ -294,49 +294,49 @@ static void tda18271_lookup_pll_map(struct tda18271_pll_map *map, /*---------------------------------------------------------------------*/ -void tda18271_calc_cal_pll(u32 *freq, u8 *post_div, u8 *div) +void tda18271_lookup_cal_pll(u32 *freq, u8 *post_div, u8 *div) { tda18271_lookup_pll_map(tda18271_cal_pll, freq, post_div, div); dbg_map("post div = 0x%02x, div = 0x%02x\n", *post_div, *div); } -void tda18271_calc_main_pll(u32 *freq, u8 *post_div, u8 *div) +void tda18271_lookup_main_pll(u32 *freq, u8 *post_div, u8 *div) { tda18271_lookup_pll_map(tda18271_main_pll, freq, post_div, div); dbg_map("post div = 0x%02x, div = 0x%02x\n", *post_div, *div); } -void tda18271_calc_bp_filter(u32 *freq, u8 *val) +void tda18271_lookup_bp_filter(u32 *freq, u8 *val) { tda18271_lookup_map(tda18271_bp_filter, freq, val); dbg_map("0x%02x\n", *val); } -void tda18271_calc_km(u32 *freq, u8 *val) +void tda18271_lookup_km(u32 *freq, u8 *val) { tda18271_lookup_map(tda18271_km, freq, val); dbg_map("0x%02x\n", *val); } -void tda18271_calc_rf_band(u32 *freq, u8 *val) +void tda18271_lookup_rf_band(u32 *freq, u8 *val) { tda18271_lookup_map(tda18271_rf_band, freq, val); dbg_map("0x%02x\n", *val); } -void tda18271_calc_gain_taper(u32 *freq, u8 *val) +void tda18271_lookup_gain_taper(u32 *freq, u8 *val) { tda18271_lookup_map(tda18271_gain_taper, freq, val); dbg_map("0x%02x\n", *val); } -void tda18271_calc_rf_cal(u32 *freq, u8 *val) +void tda18271_lookup_rf_cal(u32 *freq, u8 *val) { tda18271_lookup_map(tda18271_rf_cal, freq, val); dbg_map("0x%02x\n", *val); } -void tda18271_calc_ir_measure(u32 *freq, u8 *val) +void tda18271_lookup_ir_measure(u32 *freq, u8 *val) { tda18271_lookup_map(tda18271_ir_measure, freq, val); dbg_map("0x%02x\n", *val); -- cgit v1.2.3-59-g8ed1b From fe0bf6d783d8057bd3dd0dd69613a390d6986c47 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 24 Dec 2007 05:05:05 -0300 Subject: V4L/DVB (6907): tda18271: create separate calc_pll functions Consolidate duplicated code by creating functions: tda18271_calc_main_pll tda18271_calc_cal_pll Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 99 +++++++++++++++++-------------- 1 file changed, 56 insertions(+), 43 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index 4c105853d93c..19c9be92de51 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -371,13 +371,64 @@ static int tda18271_init(struct dvb_frontend *fe) return 0; } +static int tda18271_calc_main_pll(struct dvb_frontend *fe, u32 freq) +{ + /* Sets Main Post-Divider & Divider bytes, but does not write them */ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + u8 d, pd; + u32 div; + + tda18271_lookup_main_pll(&freq, &pd, &d); + + regs[R_MPD] = (0x77 & pd); + + switch (priv->mode) { + case TDA18271_ANALOG: + regs[R_MPD] &= ~0x08; + break; + case TDA18271_DIGITAL: + regs[R_MPD] |= 0x08; + break; + } + + div = ((d * (freq / 1000)) << 7) / 125; + + regs[R_MD1] = 0x7f & (div >> 16); + regs[R_MD2] = 0xff & (div >> 8); + regs[R_MD3] = 0xff & div; + + return 0; +} + +static int tda18271_calc_cal_pll(struct dvb_frontend *fe, u32 freq) +{ + /* Sets Cal Post-Divider & Divider bytes, but does not write them */ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + u8 d, pd; + u32 div; + + tda18271_lookup_cal_pll(&freq, &pd, &d); + + regs[R_CPD] = pd; + + div = ((d * (freq / 1000)) << 7) / 125; + + regs[R_CD1] = 0x7f & (div >> 16); + regs[R_CD2] = 0xff & (div >> 8); + regs[R_CD3] = 0xff & div; + + return 0; +} + static int tda18271_tune(struct dvb_frontend *fe, u32 ifc, u32 freq, u32 bw, u8 std) { struct tda18271_priv *priv = fe->tuner_priv; unsigned char *regs = priv->tda18271_regs; - u32 div, N = 0; - u8 d, pd, val; + u32 N = 0; + u8 val; tda18271_init(fe); @@ -419,14 +470,7 @@ static int tda18271_tune(struct dvb_frontend *fe, break; } - tda18271_lookup_cal_pll(&N, &pd, &d); - - regs[R_CPD] = pd; - - div = ((d * (N / 1000)) << 7) / 125; - regs[R_CD1] = 0x7f & (div >> 16); - regs[R_CD2] = 0xff & (div >> 8); - regs[R_CD3] = 0xff & div; + tda18271_calc_cal_pll(fe, N); /* calculate MAIN PLL */ @@ -439,23 +483,7 @@ static int tda18271_tune(struct dvb_frontend *fe, break; } - tda18271_lookup_main_pll(&N, &pd, &d); - - regs[R_MPD] = (0x7f & pd); - - switch (priv->mode) { - case TDA18271_ANALOG: - regs[R_MPD] &= ~0x08; - break; - case TDA18271_DIGITAL: - regs[R_MPD] |= 0x08; - break; - } - - div = ((d * (N / 1000)) << 7) / 125; - regs[R_MD1] = 0x7f & (div >> 16); - regs[R_MD2] = 0xff & (div >> 8); - regs[R_MD3] = 0xff & div; + tda18271_calc_main_pll(fe, N); tda18271_write_regs(fe, R_EP3, 11); msleep(5); /* RF tracking filter calibration initialization */ @@ -554,22 +582,7 @@ static int tda18271_tune(struct dvb_frontend *fe, /* calculate MAIN PLL */ N = freq + ifc; - tda18271_lookup_main_pll(&N, &pd, &d); - - regs[R_MPD] = (0x7f & pd); - switch (priv->mode) { - case TDA18271_ANALOG: - regs[R_MPD] &= ~0x08; - break; - case TDA18271_DIGITAL: - regs[R_MPD] |= 0x08; - break; - } - - div = ((d * (N / 1000)) << 7) / 125; - regs[R_MD1] = 0x7f & (div >> 16); - regs[R_MD2] = 0xff & (div >> 8); - regs[R_MD3] = 0xff & div; + tda18271_calc_main_pll(fe, N); tda18271_write_regs(fe, R_TM, 15); msleep(5); -- cgit v1.2.3-59-g8ed1b From c90762799c42df203fc2c9c1a2ac39f154f8faca Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 24 Dec 2007 04:36:14 -0300 Subject: V4L/DVB (6908): tda8290: add the option not to probe for tuners passed into tda829x_config Prevent the tda8290 module from probing for tuners during tda829x_attach, by passing: .probe_tuner = TDA829X_DONT_PROBE, ...in struct tda829x_config Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tda8290.c | 9 ++++++++- drivers/media/video/tda8290.h | 4 ++++ 2 files changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/tda8290.c b/drivers/media/video/tda8290.c index 2e1d9b663a91..bb62d5629af2 100644 --- a/drivers/media/video/tda8290.c +++ b/drivers/media/video/tda8290.c @@ -688,10 +688,17 @@ struct dvb_frontend *tda829x_attach(struct dvb_frontend *fe, sizeof(struct analog_demod_ops)); } - if (tda829x_find_tuner(fe) < 0) + if ((!(cfg) || (TDA829X_PROBE_TUNER == cfg->probe_tuner)) && + (tda829x_find_tuner(fe) < 0)) goto fail; switch (priv->ver) { + case TDA8290: + name = "tda8290"; + break; + case TDA8295: + name = "tda8295"; + break; case TDA8290 | TDA8275: name = "tda8290+75"; break; diff --git a/drivers/media/video/tda8290.h b/drivers/media/video/tda8290.h index 7bce03183d08..dc8ef310b7b2 100644 --- a/drivers/media/video/tda8290.h +++ b/drivers/media/video/tda8290.h @@ -23,6 +23,10 @@ struct tda829x_config { unsigned int *lna_cfg; int (*tuner_callback) (void *dev, int command, int arg); + + unsigned int probe_tuner:1; +#define TDA829X_PROBE_TUNER 0 +#define TDA829X_DONT_PROBE 1 }; #if defined(CONFIG_TUNER_TDA8290) || (defined(CONFIG_TUNER_TDA8290_MODULE) && defined(MODULE)) -- cgit v1.2.3-59-g8ed1b From 4041f1a58774249f5f26163e68b844521ece1fb4 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 24 Dec 2007 04:52:08 -0300 Subject: V4L/DVB (6909): cx23885: fix bad use count caused by tda18271 being probed by tda8290 Don't allow the tda8290 module to probe and attach the tuner module, causing incorrect use counts when using dvb_attach. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/cx23885-dvb.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 0f7e9dfcd73f..81dd47f6f654 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -33,6 +33,7 @@ #include "s5h1409.h" #include "mt2131.h" #include "tda8290.h" +#include "tda18271.h" #include "lgdt330x.h" #include "xc5000.h" #include "dvb-pll.h" @@ -178,6 +179,10 @@ static struct xc5000_config hauppauge_hvr1500q_tunerconfig = { .tuner_reset = hauppauge_hvr1500q_tuner_reset }; +static struct tda829x_config tda829x_no_probe = { + .probe_tuner = TDA829X_DONT_PROBE, +}; + static int cx23885_hvr1500_xc3028_callback(void *ptr, int command, int arg) { struct cx23885_tsport *port = ptr; @@ -240,7 +245,10 @@ static int dvb_register(struct cx23885_tsport *port) if (port->dvb.frontend != NULL) { dvb_attach(tda829x_attach, port->dvb.frontend, &dev->i2c_bus[1].i2c_adap, 0x42, - NULL); + &tda829x_no_probe); + dvb_attach(tda18271_attach, port->dvb.frontend, + 0x60, &dev->i2c_bus[1].i2c_adap, + TDA18271_GATE_ANALOG); } break; case 0: -- cgit v1.2.3-59-g8ed1b From 402aa76aa5e57801b4db5ccf8c7beea9f580bb1b Mon Sep 17 00:00:00 2001 From: Douglas Schilling Landgraf Date: Thu, 27 Dec 2007 22:20:58 -0300 Subject: V4L/DVB (6911): Converted bttv to use video_ioctl2 Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bt8xx/bttv-driver.c | 2033 +++++++++++++++++-------------- drivers/media/video/bt8xx/bttv-vbi.c | 52 +- drivers/media/video/bt8xx/bttvp.h | 11 +- 3 files changed, 1134 insertions(+), 962 deletions(-) diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index e04113f0b7e2..d6a305ddc53e 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -476,7 +476,7 @@ static const unsigned int BTTV_TVNORMS = ARRAY_SIZE(bttv_tvnorms); /* ----------------------------------------------------------------------- */ /* bttv format list packed pixel formats must come first */ -static const struct bttv_format bttv_formats[] = { +static const struct bttv_format formats[] = { { .name = "8 bpp, gray", .fourcc = V4L2_PIX_FMT_GREY, @@ -609,7 +609,7 @@ static const struct bttv_format bttv_formats[] = { .flags = FORMAT_FLAGS_RAW, } }; -static const unsigned int BTTV_FORMATS = ARRAY_SIZE(bttv_formats); +static const unsigned int FORMATS = ARRAY_SIZE(formats); /* ----------------------------------------------------------------------- */ @@ -787,6 +787,16 @@ static const struct v4l2_queryctrl bttv_ctls[] = { }; static const int BTTV_CTLS = ARRAY_SIZE(bttv_ctls); +static const struct v4l2_queryctrl *ctrl_by_id(int id) +{ + int i; + + for (i = 0; i < BTTV_CTLS; i++) + if (bttv_ctls[i].id == id) + return bttv_ctls+i; + return NULL; +} + /* ----------------------------------------------------------------------- */ /* resource management */ @@ -1432,157 +1442,6 @@ static void bttv_reinit_bt848(struct bttv *btv) set_input(btv, btv->input, btv->tvnorm); } -static int get_control(struct bttv *btv, struct v4l2_control *c) -{ - switch (c->id) { - case V4L2_CID_BRIGHTNESS: - c->value = btv->bright; - break; - case V4L2_CID_HUE: - c->value = btv->hue; - break; - case V4L2_CID_CONTRAST: - c->value = btv->contrast; - break; - case V4L2_CID_SATURATION: - c->value = btv->saturation; - break; - - case V4L2_CID_AUDIO_MUTE: - case V4L2_CID_AUDIO_VOLUME: - case V4L2_CID_AUDIO_BALANCE: - case V4L2_CID_AUDIO_BASS: - case V4L2_CID_AUDIO_TREBLE: - bttv_call_i2c_clients(btv,VIDIOC_G_CTRL,c); - break; - - case V4L2_CID_PRIVATE_CHROMA_AGC: - c->value = btv->opt_chroma_agc; - break; - case V4L2_CID_PRIVATE_COMBFILTER: - c->value = btv->opt_combfilter; - break; - case V4L2_CID_PRIVATE_LUMAFILTER: - c->value = btv->opt_lumafilter; - break; - case V4L2_CID_PRIVATE_AUTOMUTE: - c->value = btv->opt_automute; - break; - case V4L2_CID_PRIVATE_AGC_CRUSH: - c->value = btv->opt_adc_crush; - break; - case V4L2_CID_PRIVATE_VCR_HACK: - c->value = btv->opt_vcr_hack; - break; - case V4L2_CID_PRIVATE_WHITECRUSH_UPPER: - c->value = btv->opt_whitecrush_upper; - break; - case V4L2_CID_PRIVATE_WHITECRUSH_LOWER: - c->value = btv->opt_whitecrush_lower; - break; - case V4L2_CID_PRIVATE_UV_RATIO: - c->value = btv->opt_uv_ratio; - break; - case V4L2_CID_PRIVATE_FULL_LUMA_RANGE: - c->value = btv->opt_full_luma_range; - break; - case V4L2_CID_PRIVATE_CORING: - c->value = btv->opt_coring; - break; - default: - return -EINVAL; - } - return 0; -} - -static int set_control(struct bttv *btv, struct v4l2_control *c) -{ - int val; - - switch (c->id) { - case V4L2_CID_BRIGHTNESS: - bt848_bright(btv,c->value); - break; - case V4L2_CID_HUE: - bt848_hue(btv,c->value); - break; - case V4L2_CID_CONTRAST: - bt848_contrast(btv,c->value); - break; - case V4L2_CID_SATURATION: - bt848_sat(btv,c->value); - break; - case V4L2_CID_AUDIO_MUTE: - audio_mute(btv, c->value); - /* fall through */ - case V4L2_CID_AUDIO_VOLUME: - if (btv->volume_gpio) { - btv->volume_gpio (btv, c->value); - } - bttv_call_i2c_clients(btv,VIDIOC_S_CTRL,c); - break; - case V4L2_CID_AUDIO_BALANCE: - case V4L2_CID_AUDIO_BASS: - case V4L2_CID_AUDIO_TREBLE: - bttv_call_i2c_clients(btv,VIDIOC_S_CTRL,c); - break; - - case V4L2_CID_PRIVATE_CHROMA_AGC: - btv->opt_chroma_agc = c->value; - val = btv->opt_chroma_agc ? BT848_SCLOOP_CAGC : 0; - btwrite(val, BT848_E_SCLOOP); - btwrite(val, BT848_O_SCLOOP); - break; - case V4L2_CID_PRIVATE_COMBFILTER: - btv->opt_combfilter = c->value; - break; - case V4L2_CID_PRIVATE_LUMAFILTER: - btv->opt_lumafilter = c->value; - if (btv->opt_lumafilter) { - btand(~BT848_CONTROL_LDEC, BT848_E_CONTROL); - btand(~BT848_CONTROL_LDEC, BT848_O_CONTROL); - } else { - btor(BT848_CONTROL_LDEC, BT848_E_CONTROL); - btor(BT848_CONTROL_LDEC, BT848_O_CONTROL); - } - break; - case V4L2_CID_PRIVATE_AUTOMUTE: - btv->opt_automute = c->value; - break; - case V4L2_CID_PRIVATE_AGC_CRUSH: - btv->opt_adc_crush = c->value; - btwrite(BT848_ADC_RESERVED | (btv->opt_adc_crush ? BT848_ADC_CRUSH : 0), - BT848_ADC); - break; - case V4L2_CID_PRIVATE_VCR_HACK: - btv->opt_vcr_hack = c->value; - break; - case V4L2_CID_PRIVATE_WHITECRUSH_UPPER: - btv->opt_whitecrush_upper = c->value; - btwrite(c->value, BT848_WC_UP); - break; - case V4L2_CID_PRIVATE_WHITECRUSH_LOWER: - btv->opt_whitecrush_lower = c->value; - btwrite(c->value, BT848_WC_DOWN); - break; - case V4L2_CID_PRIVATE_UV_RATIO: - btv->opt_uv_ratio = c->value; - bt848_sat(btv, btv->saturation); - break; - case V4L2_CID_PRIVATE_FULL_LUMA_RANGE: - btv->opt_full_luma_range = c->value; - btaor((c->value<<7), ~BT848_OFORM_RANGE, BT848_OFORM); - break; - case V4L2_CID_PRIVATE_CORING: - btv->opt_coring = c->value; - btaor((c->value<<5), ~BT848_OFORM_CORE32, BT848_OFORM); - break; - default: - return -EINVAL; - } - return 0; -} - /* ----------------------------------------------------------------------- */ void bttv_gpio_tracking(struct bttv *btv, char *comment) @@ -1616,11 +1475,11 @@ format_by_fourcc(int fourcc) { unsigned int i; - for (i = 0; i < BTTV_FORMATS; i++) { - if (-1 == bttv_formats[i].fourcc) + for (i = 0; i < FORMATS; i++) { + if (-1 == formats[i].fourcc) continue; - if (bttv_formats[i].fourcc == fourcc) - return bttv_formats+i; + if (formats[i].fourcc == fourcc) + return formats+i; } return NULL; } @@ -1821,215 +1680,430 @@ static struct videobuf_queue_ops bttv_video_qops = { .buf_release = buffer_release, }; -static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg) +static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *id) { - switch (cmd) { - case VIDIOC_ENUMSTD: - { - struct v4l2_standard *e = arg; - unsigned int index = e->index; + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + unsigned int i; + int err; - if (index >= BTTV_TVNORMS) - return -EINVAL; - v4l2_video_std_construct(e, bttv_tvnorms[e->index].v4l2_id, - bttv_tvnorms[e->index].name); - e->index = index; - return 0; - } - case VIDIOC_G_STD: - { - v4l2_std_id *id = arg; - *id = bttv_tvnorms[btv->tvnorm].v4l2_id; - return 0; - } - case VIDIOC_S_STD: - { - v4l2_std_id *id = arg; - unsigned int i; + err = v4l2_prio_check(&btv->prio, &fh->prio); + if (0 != err) + return err; - for (i = 0; i < BTTV_TVNORMS; i++) - if (*id & bttv_tvnorms[i].v4l2_id) - break; - if (i == BTTV_TVNORMS) - return -EINVAL; + for (i = 0; i < BTTV_TVNORMS; i++) + if (*id & bttv_tvnorms[i].v4l2_id) + break; + if (i == BTTV_TVNORMS) + return -EINVAL; - mutex_lock(&btv->lock); - set_tvnorm(btv,i); - mutex_unlock(&btv->lock); - return 0; - } - case VIDIOC_QUERYSTD: - { - v4l2_std_id *id = arg; + mutex_lock(&btv->lock); + set_tvnorm(btv, i); + mutex_unlock(&btv->lock); - if (btread(BT848_DSTATUS) & BT848_DSTATUS_NUML) - *id = V4L2_STD_625_50; - else - *id = V4L2_STD_525_60; - return 0; - } + return 0; +} - case VIDIOC_ENUMINPUT: - { - struct v4l2_input *i = arg; - unsigned int n; +static int vidioc_querystd(struct file *file, void *f, v4l2_std_id *id) +{ + struct bttv_fh *fh = f; + struct bttv *btv = fh->btv; - n = i->index; - if (n >= bttv_tvcards[btv->c.type].video_inputs) - return -EINVAL; - memset(i,0,sizeof(*i)); - i->index = n; - i->type = V4L2_INPUT_TYPE_CAMERA; - i->audioset = 1; - if (i->index == bttv_tvcards[btv->c.type].tuner) { - sprintf(i->name, "Television"); - i->type = V4L2_INPUT_TYPE_TUNER; - i->tuner = 0; - } else if (i->index == btv->svhs) { - sprintf(i->name, "S-Video"); - } else { - sprintf(i->name,"Composite%d",i->index); - } - if (i->index == btv->input) { - __u32 dstatus = btread(BT848_DSTATUS); - if (0 == (dstatus & BT848_DSTATUS_PRES)) - i->status |= V4L2_IN_ST_NO_SIGNAL; - if (0 == (dstatus & BT848_DSTATUS_HLOC)) - i->status |= V4L2_IN_ST_NO_H_LOCK; - } - for (n = 0; n < BTTV_TVNORMS; n++) - i->std |= bttv_tvnorms[n].v4l2_id; - return 0; - } - case VIDIOC_G_INPUT: - { - int *i = arg; - *i = btv->input; - return 0; - } - case VIDIOC_S_INPUT: - { - unsigned int *i = arg; + if (btread(BT848_DSTATUS) & BT848_DSTATUS_NUML) + *id = V4L2_STD_625_50; + else + *id = V4L2_STD_525_60; + return 0; +} - if (*i > bttv_tvcards[btv->c.type].video_inputs) - return -EINVAL; - mutex_lock(&btv->lock); - set_input(btv, *i, btv->tvnorm); - mutex_unlock(&btv->lock); - return 0; - } +static int vidioc_enum_input(struct file *file, void *priv, + struct v4l2_input *i) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + unsigned int n; - case VIDIOC_S_TUNER: - { - struct v4l2_tuner *t = arg; + n = i->index; - if (UNSET == bttv_tvcards[btv->c.type].tuner) - return -EINVAL; - if (0 != t->index) - return -EINVAL; - mutex_lock(&btv->lock); - bttv_call_i2c_clients(btv, VIDIOC_S_TUNER, t); + if (n >= bttv_tvcards[btv->c.type].video_inputs) + return -EINVAL; - if (btv->audio_mode_gpio) { - btv->audio_mode_gpio (btv,t,1); - } - mutex_unlock(&btv->lock); - return 0; - } + memset(i, 0, sizeof(*i)); - case VIDIOC_G_FREQUENCY: - { - struct v4l2_frequency *f = arg; + i->index = n; + i->type = V4L2_INPUT_TYPE_CAMERA; + i->audioset = 1; - memset(f,0,sizeof(*f)); - f->type = V4L2_TUNER_ANALOG_TV; - f->frequency = btv->freq; - return 0; + if (i->index == bttv_tvcards[btv->c.type].tuner) { + sprintf(i->name, "Television"); + i->type = V4L2_INPUT_TYPE_TUNER; + i->tuner = 0; + } else if (i->index == btv->svhs) { + sprintf(i->name, "S-Video"); + } else { + sprintf(i->name, "Composite%d", i->index); } - case VIDIOC_S_FREQUENCY: - { - struct v4l2_frequency *f = arg; - if (unlikely(f->tuner != 0)) - return -EINVAL; - if (unlikely (f->type != V4L2_TUNER_ANALOG_TV)) - return -EINVAL; - mutex_lock(&btv->lock); - btv->freq = f->frequency; - bttv_call_i2c_clients(btv,VIDIOC_S_FREQUENCY,f); - if (btv->has_matchbox && btv->radio_user) - tea5757_set_freq(btv,btv->freq); - mutex_unlock(&btv->lock); - return 0; - } - case VIDIOC_LOG_STATUS: - { - printk(KERN_INFO "bttv%d: ================= START STATUS CARD #%d =================\n", btv->c.nr, btv->c.nr); - bttv_call_i2c_clients(btv, VIDIOC_LOG_STATUS, NULL); - printk(KERN_INFO "bttv%d: ================== END STATUS CARD #%d ==================\n", btv->c.nr, btv->c.nr); - return 0; - } - case VIDIOC_G_CTRL: - return get_control(btv,arg); - case VIDIOC_S_CTRL: - return set_control(btv,arg); -#ifdef CONFIG_VIDEO_ADV_DEBUG - case VIDIOC_DBG_G_REGISTER: - case VIDIOC_DBG_S_REGISTER: - { - struct v4l2_register *reg = arg; - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - if (!v4l2_chip_match_host(reg->match_type, reg->match_chip)) - return -EINVAL; - /* bt848 has a 12-bit register space */ - reg->reg &= 0xfff; - if (cmd == VIDIOC_DBG_G_REGISTER) - reg->val = btread(reg->reg); - else - btwrite(reg->val, reg->reg); - return 0; + if (i->index == btv->input) { + __u32 dstatus = btread(BT848_DSTATUS); + if (0 == (dstatus & BT848_DSTATUS_PRES)) + i->status |= V4L2_IN_ST_NO_SIGNAL; + if (0 == (dstatus & BT848_DSTATUS_HLOC)) + i->status |= V4L2_IN_ST_NO_H_LOCK; } -#endif - default: - return -ENOIOCTLCMD; + for (n = 0; n < BTTV_TVNORMS; n++) + i->std |= bttv_tvnorms[n].v4l2_id; - } return 0; } -/* Given cropping boundaries b and the scaled width and height of a - single field or frame, which must not exceed hardware limits, this - function adjusts the cropping parameters c. */ -static void -bttv_crop_adjust (struct bttv_crop * c, - const struct v4l2_rect * b, - __s32 width, - __s32 height, - enum v4l2_field field) +static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) { - __s32 frame_height = height << !V4L2_FIELD_HAS_BOTH(field); - __s32 max_left; - __s32 max_top; + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; - if (width < c->min_scaled_width) { - /* Max. hor. scale factor 16:1. */ - c->rect.width = width * 16; - } else if (width > c->max_scaled_width) { - /* Min. hor. scale factor 1:1. */ - c->rect.width = width; + *i = btv->input; + return 0; +} - max_left = b->left + b->width - width; - max_left = min(max_left, (__s32) MAX_HDELAY); - if (c->rect.left > max_left) - c->rect.left = max_left; - } +static int vidioc_s_input(struct file *file, void *priv, unsigned int i) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; - if (height < c->min_scaled_height) { - /* Max. vert. scale factor 16:1, single fields 8:1. */ - c->rect.height = height * 16; - } else if (frame_height > c->max_scaled_height) { + int err; + + err = v4l2_prio_check(&btv->prio, &fh->prio); + if (0 != err) + return err; + + if (i > bttv_tvcards[btv->c.type].video_inputs) + return -EINVAL; + + mutex_lock(&btv->lock); + set_input(btv, i, btv->tvnorm); + mutex_unlock(&btv->lock); + return 0; +} + +static int vidioc_s_tuner(struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + int err; + + err = v4l2_prio_check(&btv->prio, &fh->prio); + if (0 != err) + return err; + + if (UNSET == bttv_tvcards[btv->c.type].tuner) + return -EINVAL; + + if (0 != t->index) + return -EINVAL; + + mutex_lock(&btv->lock); + bttv_call_i2c_clients(btv, VIDIOC_S_TUNER, t); + + if (btv->audio_mode_gpio) + btv->audio_mode_gpio(btv, t, 1); + + mutex_unlock(&btv->lock); + + return 0; +} + +static int vidioc_g_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + int err; + + err = v4l2_prio_check(&btv->prio, &fh->prio); + if (0 != err) + return err; + + f->type = V4L2_TUNER_ANALOG_TV; + f->frequency = btv->freq; + + return 0; +} + +static int vidioc_s_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + int err; + + err = v4l2_prio_check(&btv->prio, &fh->prio); + if (0 != err) + return err; + + if (unlikely(f->tuner != 0)) + return -EINVAL; + if (unlikely(f->type != V4L2_TUNER_ANALOG_TV)) + return -EINVAL; + mutex_lock(&btv->lock); + btv->freq = f->frequency; + bttv_call_i2c_clients(btv, VIDIOC_S_FREQUENCY, f); + if (btv->has_matchbox && btv->radio_user) + tea5757_set_freq(btv, btv->freq); + mutex_unlock(&btv->lock); + return 0; +} + +static int vidioc_log_status(struct file *file, void *f) +{ + struct bttv_fh *fh = f; + struct bttv *btv = fh->btv; + + printk(KERN_INFO "bttv%d: ======== START STATUS CARD #%d ========\n", + btv->c.nr, btv->c.nr); + bttv_call_i2c_clients(btv, VIDIOC_LOG_STATUS, NULL); + printk(KERN_INFO "bttv%d: ======== END STATUS CARD #%d ========\n", + btv->c.nr, btv->c.nr); + return 0; +} + +static int vidioc_g_ctrl(struct file *file, void *priv, + struct v4l2_control *c) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + + switch (c->id) { + case V4L2_CID_BRIGHTNESS: + c->value = btv->bright; + break; + case V4L2_CID_HUE: + c->value = btv->hue; + break; + case V4L2_CID_CONTRAST: + c->value = btv->contrast; + break; + case V4L2_CID_SATURATION: + c->value = btv->saturation; + break; + + case V4L2_CID_AUDIO_MUTE: + case V4L2_CID_AUDIO_VOLUME: + case V4L2_CID_AUDIO_BALANCE: + case V4L2_CID_AUDIO_BASS: + case V4L2_CID_AUDIO_TREBLE: + bttv_call_i2c_clients(btv, VIDIOC_G_CTRL, c); + break; + + case V4L2_CID_PRIVATE_CHROMA_AGC: + c->value = btv->opt_chroma_agc; + break; + case V4L2_CID_PRIVATE_COMBFILTER: + c->value = btv->opt_combfilter; + break; + case V4L2_CID_PRIVATE_LUMAFILTER: + c->value = btv->opt_lumafilter; + break; + case V4L2_CID_PRIVATE_AUTOMUTE: + c->value = btv->opt_automute; + break; + case V4L2_CID_PRIVATE_AGC_CRUSH: + c->value = btv->opt_adc_crush; + break; + case V4L2_CID_PRIVATE_VCR_HACK: + c->value = btv->opt_vcr_hack; + break; + case V4L2_CID_PRIVATE_WHITECRUSH_UPPER: + c->value = btv->opt_whitecrush_upper; + break; + case V4L2_CID_PRIVATE_WHITECRUSH_LOWER: + c->value = btv->opt_whitecrush_lower; + break; + case V4L2_CID_PRIVATE_UV_RATIO: + c->value = btv->opt_uv_ratio; + break; + case V4L2_CID_PRIVATE_FULL_LUMA_RANGE: + c->value = btv->opt_full_luma_range; + break; + case V4L2_CID_PRIVATE_CORING: + c->value = btv->opt_coring; + break; + default: + return -EINVAL; + } + return 0; +} + +static int vidioc_s_ctrl(struct file *file, void *f, + struct v4l2_control *c) +{ + int err; + int val; + struct bttv_fh *fh = f; + struct bttv *btv = fh->btv; + + err = v4l2_prio_check(&btv->prio, &fh->prio); + if (0 != err) + return err; + + switch (c->id) { + case V4L2_CID_BRIGHTNESS: + bt848_bright(btv, c->value); + break; + case V4L2_CID_HUE: + bt848_hue(btv, c->value); + break; + case V4L2_CID_CONTRAST: + bt848_contrast(btv, c->value); + break; + case V4L2_CID_SATURATION: + bt848_sat(btv, c->value); + break; + case V4L2_CID_AUDIO_MUTE: + audio_mute(btv, c->value); + /* fall through */ + case V4L2_CID_AUDIO_VOLUME: + if (btv->volume_gpio) + btv->volume_gpio(btv, c->value); + + bttv_call_i2c_clients(btv, VIDIOC_S_CTRL, c); + break; + case V4L2_CID_AUDIO_BALANCE: + case V4L2_CID_AUDIO_BASS: + case V4L2_CID_AUDIO_TREBLE: + bttv_call_i2c_clients(btv, VIDIOC_S_CTRL, c); + break; + + case V4L2_CID_PRIVATE_CHROMA_AGC: + btv->opt_chroma_agc = c->value; + val = btv->opt_chroma_agc ? BT848_SCLOOP_CAGC : 0; + btwrite(val, BT848_E_SCLOOP); + btwrite(val, BT848_O_SCLOOP); + break; + case V4L2_CID_PRIVATE_COMBFILTER: + btv->opt_combfilter = c->value; + break; + case V4L2_CID_PRIVATE_LUMAFILTER: + btv->opt_lumafilter = c->value; + if (btv->opt_lumafilter) { + btand(~BT848_CONTROL_LDEC, BT848_E_CONTROL); + btand(~BT848_CONTROL_LDEC, BT848_O_CONTROL); + } else { + btor(BT848_CONTROL_LDEC, BT848_E_CONTROL); + btor(BT848_CONTROL_LDEC, BT848_O_CONTROL); + } + break; + case V4L2_CID_PRIVATE_AUTOMUTE: + btv->opt_automute = c->value; + break; + case V4L2_CID_PRIVATE_AGC_CRUSH: + btv->opt_adc_crush = c->value; + btwrite(BT848_ADC_RESERVED | + (btv->opt_adc_crush ? BT848_ADC_CRUSH : 0), + BT848_ADC); + break; + case V4L2_CID_PRIVATE_VCR_HACK: + btv->opt_vcr_hack = c->value; + break; + case V4L2_CID_PRIVATE_WHITECRUSH_UPPER: + btv->opt_whitecrush_upper = c->value; + btwrite(c->value, BT848_WC_UP); + break; + case V4L2_CID_PRIVATE_WHITECRUSH_LOWER: + btv->opt_whitecrush_lower = c->value; + btwrite(c->value, BT848_WC_DOWN); + break; + case V4L2_CID_PRIVATE_UV_RATIO: + btv->opt_uv_ratio = c->value; + bt848_sat(btv, btv->saturation); + break; + case V4L2_CID_PRIVATE_FULL_LUMA_RANGE: + btv->opt_full_luma_range = c->value; + btaor((c->value<<7), ~BT848_OFORM_RANGE, BT848_OFORM); + break; + case V4L2_CID_PRIVATE_CORING: + btv->opt_coring = c->value; + btaor((c->value<<5), ~BT848_OFORM_CORE32, BT848_OFORM); + break; + default: + return -EINVAL; + } + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int vidioc_g_register(struct file *file, void *f, + struct v4l2_register *reg) +{ + struct bttv_fh *fh = f; + struct bttv *btv = fh->btv; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + if (!v4l2_chip_match_host(reg->match_type, reg->match_chip)) + return -EINVAL; + + /* bt848 has a 12-bit register space */ + reg->reg &= 0xfff; + reg->val = btread(reg->reg); + + return 0; +} + +static int vidioc_s_register(struct file *file, void *f, + struct v4l2_register *reg) +{ + struct bttv_fh *fh = f; + struct bttv *btv = fh->btv; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + if (!v4l2_chip_match_host(reg->match_type, reg->match_chip)) + return -EINVAL; + + /* bt848 has a 12-bit register space */ + reg->reg &= 0xfff; + btwrite(reg->val, reg->reg); + + return 0; +} +#endif + +/* Given cropping boundaries b and the scaled width and height of a + single field or frame, which must not exceed hardware limits, this + function adjusts the cropping parameters c. */ +static void +bttv_crop_adjust (struct bttv_crop * c, + const struct v4l2_rect * b, + __s32 width, + __s32 height, + enum v4l2_field field) +{ + __s32 frame_height = height << !V4L2_FIELD_HAS_BOTH(field); + __s32 max_left; + __s32 max_top; + + if (width < c->min_scaled_width) { + /* Max. hor. scale factor 16:1. */ + c->rect.width = width * 16; + } else if (width > c->max_scaled_width) { + /* Min. hor. scale factor 1:1. */ + c->rect.width = width; + + max_left = b->left + b->width - width; + max_left = min(max_left, (__s32) MAX_HDELAY); + if (c->rect.left > max_left) + c->rect.left = max_left; + } + + if (height < c->min_scaled_height) { + /* Max. vert. scale factor 16:1, single fields 8:1. */ + c->rect.height = height * 16; + } else if (frame_height > c->max_scaled_height) { /* Min. vert. scale factor 1:1. Top and height count field lines times two. */ c->rect.height = (frame_height + 1) & ~1; @@ -2373,652 +2447,633 @@ pix_format_set_size (struct v4l2_pix_format * f, } } -static int bttv_g_fmt(struct bttv_fh *fh, struct v4l2_format *f) +static int vidioc_g_fmt_cap(struct file *file, void *priv, + struct v4l2_format *f) { - switch (f->type) { - case V4L2_BUF_TYPE_VIDEO_CAPTURE: - memset(&f->fmt.pix,0,sizeof(struct v4l2_pix_format)); - pix_format_set_size (&f->fmt.pix, fh->fmt, - fh->width, fh->height); - f->fmt.pix.field = fh->cap.field; - f->fmt.pix.pixelformat = fh->fmt->fourcc; - return 0; - case V4L2_BUF_TYPE_VIDEO_OVERLAY: - memset(&f->fmt.win,0,sizeof(struct v4l2_window)); - f->fmt.win.w = fh->ov.w; - f->fmt.win.field = fh->ov.field; - return 0; - case V4L2_BUF_TYPE_VBI_CAPTURE: - bttv_vbi_get_fmt(fh, &f->fmt.vbi); - return 0; - default: - return -EINVAL; - } + struct bttv_fh *fh = priv; + + pix_format_set_size(&f->fmt.pix, fh->fmt, + fh->width, fh->height); + f->fmt.pix.field = fh->cap.field; + f->fmt.pix.pixelformat = fh->fmt->fourcc; + + return 0; } -static int bttv_try_fmt(struct bttv_fh *fh, struct bttv *btv, - struct v4l2_format *f, int adjust_crop) +static int vidioc_g_fmt_overlay(struct file *file, void *priv, + struct v4l2_format *f) { - switch (f->type) { - case V4L2_BUF_TYPE_VIDEO_CAPTURE: - { - const struct bttv_format *fmt; - enum v4l2_field field; - __s32 width, height; - int rc; + struct bttv_fh *fh = priv; - fmt = format_by_fourcc(f->fmt.pix.pixelformat); - if (NULL == fmt) - return -EINVAL; + f->fmt.win.w = fh->ov.w; + f->fmt.win.field = fh->ov.field; - field = f->fmt.pix.field; - if (V4L2_FIELD_ANY == field) { - __s32 height2; + return 0; +} - height2 = btv->crop[!!fh->do_crop].rect.height >> 1; - field = (f->fmt.pix.height > height2) - ? V4L2_FIELD_INTERLACED - : V4L2_FIELD_BOTTOM; - } - if (V4L2_FIELD_SEQ_BT == field) - field = V4L2_FIELD_SEQ_TB; - switch (field) { - case V4L2_FIELD_TOP: - case V4L2_FIELD_BOTTOM: - case V4L2_FIELD_ALTERNATE: - case V4L2_FIELD_INTERLACED: - break; - case V4L2_FIELD_SEQ_TB: - if (fmt->flags & FORMAT_FLAGS_PLANAR) - return -EINVAL; - break; - default: - return -EINVAL; - } +static int vidioc_try_fmt_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + const struct bttv_format *fmt; + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + enum v4l2_field field; + __s32 width, height; - width = f->fmt.pix.width; - height = f->fmt.pix.height; + fmt = format_by_fourcc(f->fmt.pix.pixelformat); + if (NULL == fmt) + return -EINVAL; - rc = limit_scaled_size(fh, &width, &height, field, - /* width_mask: 4 pixels */ ~3, - /* width_bias: nearest */ 2, - /* adjust_size */ 1, - adjust_crop); - if (0 != rc) - return rc; + field = f->fmt.pix.field; - /* update data for the application */ - f->fmt.pix.field = field; - pix_format_set_size(&f->fmt.pix, fmt, width, height); + if (V4L2_FIELD_ANY == field) { + __s32 height2; - return 0; + height2 = btv->crop[!!fh->do_crop].rect.height >> 1; + field = (f->fmt.pix.height > height2) + ? V4L2_FIELD_INTERLACED + : V4L2_FIELD_BOTTOM; } - case V4L2_BUF_TYPE_VIDEO_OVERLAY: - return verify_window(fh, &f->fmt.win, - /* adjust_size */ 1, - /* adjust_crop */ 0); - case V4L2_BUF_TYPE_VBI_CAPTURE: - return bttv_vbi_try_fmt(fh, &f->fmt.vbi); + + if (V4L2_FIELD_SEQ_BT == field) + field = V4L2_FIELD_SEQ_TB; + + switch (field) { + case V4L2_FIELD_TOP: + case V4L2_FIELD_BOTTOM: + case V4L2_FIELD_ALTERNATE: + case V4L2_FIELD_INTERLACED: + break; + case V4L2_FIELD_SEQ_TB: + if (fmt->flags & FORMAT_FLAGS_PLANAR) + return -EINVAL; + break; default: return -EINVAL; } + + width = f->fmt.pix.width; + height = f->fmt.pix.height; + + /* update data for the application */ + f->fmt.pix.field = field; + pix_format_set_size(&f->fmt.pix, fmt, width, height); + + return 0; } -static int bttv_s_fmt(struct bttv_fh *fh, struct bttv *btv, - struct v4l2_format *f) +static int vidioc_try_fmt_overlay(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct bttv_fh *fh = priv; + + return verify_window(fh, &f->fmt.win, + /* adjust_size */ 1, + /* adjust_crop */ 0); +} + +static int vidioc_s_fmt_cap(struct file *file, void *priv, + struct v4l2_format *f) { int retval; + const struct bttv_format *fmt; + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; - switch (f->type) { - case V4L2_BUF_TYPE_VIDEO_CAPTURE: - { - const struct bttv_format *fmt; + retval = bttv_switch_type(fh, f->type); + if (0 != retval) + return retval; - retval = bttv_switch_type(fh,f->type); - if (0 != retval) - return retval; - retval = bttv_try_fmt(fh,btv,f, /* adjust_crop */ 1); - if (0 != retval) - return retval; - fmt = format_by_fourcc(f->fmt.pix.pixelformat); + retval = vidioc_try_fmt_cap(file, priv, f); + if (0 != retval) + return retval; - /* update our state informations */ - mutex_lock(&fh->cap.lock); - fh->fmt = fmt; - fh->cap.field = f->fmt.pix.field; - fh->cap.last = V4L2_FIELD_NONE; - fh->width = f->fmt.pix.width; - fh->height = f->fmt.pix.height; - btv->init.fmt = fmt; - btv->init.width = f->fmt.pix.width; - btv->init.height = f->fmt.pix.height; - mutex_unlock(&fh->cap.lock); + fmt = format_by_fourcc(f->fmt.pix.pixelformat); - return 0; - } - case V4L2_BUF_TYPE_VIDEO_OVERLAY: - if (no_overlay > 0) { - printk ("V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); - return -EINVAL; - } - return setup_window(fh, btv, &f->fmt.win, 1); - case V4L2_BUF_TYPE_VBI_CAPTURE: - retval = bttv_switch_type(fh,f->type); - if (0 != retval) - return retval; - return bttv_vbi_set_fmt(fh, &f->fmt.vbi); - default: + /* update our state informations */ + mutex_lock(&fh->cap.lock); + fh->fmt = fmt; + fh->cap.field = f->fmt.pix.field; + fh->cap.last = V4L2_FIELD_NONE; + fh->width = f->fmt.pix.width; + fh->height = f->fmt.pix.height; + btv->init.fmt = fmt; + btv->init.width = f->fmt.pix.width; + btv->init.height = f->fmt.pix.height; + mutex_unlock(&fh->cap.lock); + + return 0; +} + +static int vidioc_s_fmt_overlay(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + + if (no_overlay > 0) return -EINVAL; + + return setup_window(fh, btv, &f->fmt.win, 1); +} + +#ifdef CONFIG_VIDEO_V4L1_COMPAT +static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf) +{ + int retval; + unsigned int i; + struct bttv_fh *fh = priv; + + mutex_lock(&fh->cap.lock); + retval = videobuf_mmap_setup(&fh->cap, gbuffers, gbufsize, + V4L2_MEMORY_MMAP); + if (retval < 0) { + mutex_unlock(&fh->cap.lock); + return retval; } + + gbuffers = retval; + memset(mbuf, 0, sizeof(*mbuf)); + mbuf->frames = gbuffers; + mbuf->size = gbuffers * gbufsize; + + for (i = 0; i < gbuffers; i++) + mbuf->offsets[i] = i * gbufsize; + + mutex_unlock(&fh->cap.lock); + return 0; } +#endif -static int bttv_do_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, void *arg) +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) { - struct bttv_fh *fh = file->private_data; - struct bttv *btv = fh->btv; - int retval = 0; + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; - if (bttv_debug > 1) - v4l_print_ioctl(btv->c.name, cmd); + if (0 == v4l2) + return -EINVAL; - if (btv->errors) - bttv_reinit_bt848(btv); + strlcpy(cap->driver, "bttv", sizeof(cap->driver)); + strlcpy(cap->card, btv->video_dev->name, sizeof(cap->card)); + snprintf(cap->bus_info, sizeof(cap->bus_info), + "PCI:%s", pci_name(btv->c.pci)); + cap->version = BTTV_VERSION_CODE; + cap->capabilities = + V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_VBI_CAPTURE | + V4L2_CAP_READWRITE | + V4L2_CAP_STREAMING; + if (no_overlay <= 0) + cap->capabilities |= V4L2_CAP_VIDEO_OVERLAY; + + if (bttv_tvcards[btv->c.type].tuner != UNSET && + bttv_tvcards[btv->c.type].tuner != TUNER_ABSENT) + cap->capabilities |= V4L2_CAP_TUNER; + return 0; +} - switch (cmd) { - case VIDIOC_S_CTRL: - case VIDIOC_S_STD: - case VIDIOC_S_INPUT: - case VIDIOC_S_TUNER: - case VIDIOC_S_FREQUENCY: - retval = v4l2_prio_check(&btv->prio,&fh->prio); - if (0 != retval) - return retval; - }; +static int vidioc_enum_fmt_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + if (f->index >= FORMATS) + return -EINVAL; - switch (cmd) { -#ifdef CONFIG_VIDEO_V4L1_COMPAT - case VIDIOCGMBUF: - { - struct video_mbuf *mbuf = arg; - unsigned int i; + strlcpy(f->description, formats[f->index].name, sizeof(f->description)); + f->pixelformat = formats[f->index].fourcc; - retval = videobuf_mmap_setup(&fh->cap,gbuffers,gbufsize, - V4L2_MEMORY_MMAP); - if (retval < 0) - return retval; + return 0; +} - gbuffers = retval; - memset(mbuf,0,sizeof(*mbuf)); - mbuf->frames = gbuffers; - mbuf->size = gbuffers * gbufsize; - for (i = 0; i < gbuffers; i++) - mbuf->offsets[i] = i * gbufsize; - return 0; +static int vidioc_enum_fmt_overlay(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + if (no_overlay > 0) { + printk(KERN_ERR "V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); + return -EINVAL; } -#endif - /* *** v4l2 *** ************************************************ */ - case VIDIOC_QUERYCAP: - { - struct v4l2_capability *cap = arg; + if (f->index >= FORMATS) + return -EINVAL; - if (0 == v4l2) - return -EINVAL; - memset(cap, 0, sizeof (*cap)); - strlcpy(cap->driver, "bttv", sizeof (cap->driver)); - strlcpy(cap->card, btv->video_dev->name, sizeof (cap->card)); - snprintf(cap->bus_info, sizeof (cap->bus_info), - "PCI:%s", pci_name(btv->c.pci)); - cap->version = BTTV_VERSION_CODE; - cap->capabilities = - V4L2_CAP_VIDEO_CAPTURE | - V4L2_CAP_VBI_CAPTURE | - V4L2_CAP_READWRITE | - V4L2_CAP_STREAMING; - if (no_overlay <= 0) - cap->capabilities |= V4L2_CAP_VIDEO_OVERLAY; - - if (bttv_tvcards[btv->c.type].tuner != UNSET && - bttv_tvcards[btv->c.type].tuner != TUNER_ABSENT) - cap->capabilities |= V4L2_CAP_TUNER; - return 0; - } - case VIDIOC_ENUM_FMT: - { - struct v4l2_fmtdesc *f = arg; - enum v4l2_buf_type type; - unsigned int i; - int index; - - type = f->type; - if (V4L2_BUF_TYPE_VBI_CAPTURE == type) { - /* vbi */ - index = f->index; - if (0 != index) - return -EINVAL; - memset(f,0,sizeof(*f)); - f->index = index; - f->type = type; - f->pixelformat = V4L2_PIX_FMT_GREY; - strcpy(f->description,"vbi data"); - return 0; - } + strlcpy(f->description, formats[f->index].name, + sizeof(f->description)); - /* video capture + overlay */ - index = -1; - for (i = 0; i < BTTV_FORMATS; i++) { - if (bttv_formats[i].fourcc != -1) - index++; - if ((unsigned int)index == f->index) - break; - } - if (BTTV_FORMATS == i) - return -EINVAL; + f->pixelformat = formats[f->index].fourcc; - switch (f->type) { - case V4L2_BUF_TYPE_VIDEO_CAPTURE: - break; - case V4L2_BUF_TYPE_VIDEO_OVERLAY: - if (!(bttv_formats[i].flags & FORMAT_FLAGS_PACKED)) - return -EINVAL; - break; - default: + return 0; +} + +static int vidioc_enum_fmt_vbi(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + if (0 != f->index) + return -EINVAL; + + f->pixelformat = V4L2_PIX_FMT_GREY; + strcpy(f->description, "vbi data"); + + return 0; +} + +static int vidioc_g_fbuf(struct file *file, void *f, + struct v4l2_framebuffer *fb) +{ + struct bttv_fh *fh = f; + struct bttv *btv = fh->btv; + + *fb = btv->fbuf; + fb->capability = V4L2_FBUF_CAP_LIST_CLIPPING; + if (fh->ovfmt) + fb->fmt.pixelformat = fh->ovfmt->fourcc; + return 0; +} + +static int vidioc_overlay(struct file *file, void *f, unsigned int on) +{ + struct bttv_fh *fh = f; + struct bttv *btv = fh->btv; + struct bttv_buffer *new; + int retval; + + if (on) { + /* verify args */ + if (NULL == btv->fbuf.base) + return -EINVAL; + if (!fh->ov.setup_ok) { + dprintk("bttv%d: overlay: !setup_ok\n", btv->c.nr); return -EINVAL; } - memset(f,0,sizeof(*f)); - f->index = index; - f->type = type; - f->pixelformat = bttv_formats[i].fourcc; - strlcpy(f->description,bttv_formats[i].name,sizeof(f->description)); - return 0; } - case VIDIOC_TRY_FMT: - { - struct v4l2_format *f = arg; - return bttv_try_fmt(fh,btv,f, /* adjust_crop */ 0); - } - case VIDIOC_G_FMT: - { - struct v4l2_format *f = arg; - return bttv_g_fmt(fh,f); - } - case VIDIOC_S_FMT: - { - struct v4l2_format *f = arg; - return bttv_s_fmt(fh,btv,f); + + if (!check_alloc_btres(btv, fh, RESOURCE_OVERLAY)) + return -EBUSY; + + mutex_lock(&fh->cap.lock); + if (on) { + fh->ov.tvnorm = btv->tvnorm; + new = videobuf_pci_alloc(sizeof(*new)); + bttv_overlay_risc(btv, &fh->ov, fh->ovfmt, new); + } else { + new = NULL; } - case VIDIOC_G_FBUF: - { - struct v4l2_framebuffer *fb = arg; + /* switch over */ + retval = bttv_switch_overlay(btv, fh, new); + mutex_unlock(&fh->cap.lock); + return retval; +} + +static int vidioc_s_fbuf(struct file *file, void *f, + struct v4l2_framebuffer *fb) +{ + struct bttv_fh *fh = f; + struct bttv *btv = fh->btv; + const struct bttv_format *fmt; + int retval; + + if (!capable(CAP_SYS_ADMIN) && + !capable(CAP_SYS_RAWIO)) + return -EPERM; - *fb = btv->fbuf; - fb->capability = V4L2_FBUF_CAP_LIST_CLIPPING; - if (fh->ovfmt) - fb->fmt.pixelformat = fh->ovfmt->fourcc; - return 0; + /* check args */ + fmt = format_by_fourcc(fb->fmt.pixelformat); + if (NULL == fmt) + return -EINVAL; + if (0 == (fmt->flags & FORMAT_FLAGS_PACKED)) + return -EINVAL; + + retval = -EINVAL; + if (fb->flags & V4L2_FBUF_FLAG_OVERLAY) { + __s32 width = fb->fmt.width; + __s32 height = fb->fmt.height; + + retval = limit_scaled_size(fh, &width, &height, + V4L2_FIELD_INTERLACED, + /* width_mask */ ~3, + /* width_bias */ 2, + /* adjust_size */ 0, + /* adjust_crop */ 0); + if (0 != retval) + return retval; } - case VIDIOC_OVERLAY: - { - struct bttv_buffer *new; - int *on = arg; - if (*on) { - /* verify args */ - if (NULL == btv->fbuf.base) - return -EINVAL; - if (!fh->ov.setup_ok) { - dprintk("bttv%d: overlay: !setup_ok\n",btv->c.nr); - return -EINVAL; - } - } + /* ok, accept it */ + mutex_lock(&fh->cap.lock); + btv->fbuf.base = fb->base; + btv->fbuf.fmt.width = fb->fmt.width; + btv->fbuf.fmt.height = fb->fmt.height; + if (0 != fb->fmt.bytesperline) + btv->fbuf.fmt.bytesperline = fb->fmt.bytesperline; + else + btv->fbuf.fmt.bytesperline = btv->fbuf.fmt.width*fmt->depth/8; - if (!check_alloc_btres(btv,fh,RESOURCE_OVERLAY)) - return -EBUSY; + retval = 0; + fh->ovfmt = fmt; + btv->init.ovfmt = fmt; + if (fb->flags & V4L2_FBUF_FLAG_OVERLAY) { + fh->ov.w.left = 0; + fh->ov.w.top = 0; + fh->ov.w.width = fb->fmt.width; + fh->ov.w.height = fb->fmt.height; + btv->init.ov.w.width = fb->fmt.width; + btv->init.ov.w.height = fb->fmt.height; + kfree(fh->ov.clips); + fh->ov.clips = NULL; + fh->ov.nclips = 0; + + if (check_btres(fh, RESOURCE_OVERLAY)) { + struct bttv_buffer *new; - mutex_lock(&fh->cap.lock); - if (*on) { - fh->ov.tvnorm = btv->tvnorm; new = videobuf_pci_alloc(sizeof(*new)); + new->crop = btv->crop[!!fh->do_crop].rect; bttv_overlay_risc(btv, &fh->ov, fh->ovfmt, new); - } else { - new = NULL; + retval = bttv_switch_overlay(btv, fh, new); } - - /* switch over */ - retval = bttv_switch_overlay(btv,fh,new); - mutex_unlock(&fh->cap.lock); - return retval; } - case VIDIOC_S_FBUF: - { - struct v4l2_framebuffer *fb = arg; - const struct bttv_format *fmt; + mutex_unlock(&fh->cap.lock); + return retval; +} - if(!capable(CAP_SYS_ADMIN) && - !capable(CAP_SYS_RAWIO)) - return -EPERM; +static int vidioc_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *p) +{ + struct bttv_fh *fh = priv; + return videobuf_reqbufs(bttv_queue(fh), p); +} - /* check args */ - fmt = format_by_fourcc(fb->fmt.pixelformat); - if (NULL == fmt) - return -EINVAL; - if (0 == (fmt->flags & FORMAT_FLAGS_PACKED)) - return -EINVAL; +static int vidioc_querybuf(struct file *file, void *priv, + struct v4l2_buffer *b) +{ + struct bttv_fh *fh = priv; + return videobuf_querybuf(bttv_queue(fh), b); +} - retval = -EINVAL; - if (fb->flags & V4L2_FBUF_FLAG_OVERLAY) { - __s32 width = fb->fmt.width; - __s32 height = fb->fmt.height; - - retval = limit_scaled_size(fh, &width, &height, - V4L2_FIELD_INTERLACED, - /* width_mask */ ~3, - /* width_bias */ 2, - /* adjust_size */ 0, - /* adjust_crop */ 0); - if (0 != retval) - return retval; - } +static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + int res = bttv_resource(fh); - /* ok, accept it */ - mutex_lock(&fh->cap.lock); - btv->fbuf.base = fb->base; - btv->fbuf.fmt.width = fb->fmt.width; - btv->fbuf.fmt.height = fb->fmt.height; - if (0 != fb->fmt.bytesperline) - btv->fbuf.fmt.bytesperline = fb->fmt.bytesperline; - else - btv->fbuf.fmt.bytesperline = btv->fbuf.fmt.width*fmt->depth/8; - - retval = 0; - fh->ovfmt = fmt; - btv->init.ovfmt = fmt; - if (fb->flags & V4L2_FBUF_FLAG_OVERLAY) { - fh->ov.w.left = 0; - fh->ov.w.top = 0; - fh->ov.w.width = fb->fmt.width; - fh->ov.w.height = fb->fmt.height; - btv->init.ov.w.width = fb->fmt.width; - btv->init.ov.w.height = fb->fmt.height; - kfree(fh->ov.clips); - fh->ov.clips = NULL; - fh->ov.nclips = 0; - - if (check_btres(fh, RESOURCE_OVERLAY)) { - struct bttv_buffer *new; - - new = videobuf_pci_alloc(sizeof(*new)); - new->crop = btv->crop[!!fh->do_crop].rect; - bttv_overlay_risc(btv,&fh->ov,fh->ovfmt,new); - retval = bttv_switch_overlay(btv,fh,new); - } - } - mutex_unlock(&fh->cap.lock); - return retval; - } - case VIDIOC_REQBUFS: - return videobuf_reqbufs(bttv_queue(fh),arg); - case VIDIOC_QUERYBUF: - return videobuf_querybuf(bttv_queue(fh),arg); - case VIDIOC_QBUF: - { - int res = bttv_resource(fh); + if (!check_alloc_btres(btv, fh, res)) + return -EBUSY; - if (!check_alloc_btres(btv, fh, res)) - return -EBUSY; - return videobuf_qbuf(bttv_queue(fh),arg); - } - case VIDIOC_DQBUF: - return videobuf_dqbuf(bttv_queue(fh),arg, - file->f_flags & O_NONBLOCK); - case VIDIOC_STREAMON: - { - int res = bttv_resource(fh); + return videobuf_qbuf(bttv_queue(fh), b); +} - if (!check_alloc_btres(btv,fh,res)) - return -EBUSY; - return videobuf_streamon(bttv_queue(fh)); - } - case VIDIOC_STREAMOFF: - { - int res = bttv_resource(fh); +static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) +{ + struct bttv_fh *fh = priv; + return videobuf_dqbuf(bttv_queue(fh), b, + file->f_flags & O_NONBLOCK); +} - retval = videobuf_streamoff(bttv_queue(fh)); - if (retval < 0) - return retval; - free_btres(btv,fh,res); - return 0; - } +static int vidioc_streamon(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + int res = bttv_resource(fh); - case VIDIOC_QUERYCTRL: - { - struct v4l2_queryctrl *c = arg; - int i; + if (!check_alloc_btres(btv, fh, res)) + return -EBUSY; + return videobuf_streamon(bttv_queue(fh)); +} - if ((c->id < V4L2_CID_BASE || - c->id >= V4L2_CID_LASTP1) && - (c->id < V4L2_CID_PRIVATE_BASE || - c->id >= V4L2_CID_PRIVATE_LASTP1)) - return -EINVAL; - for (i = 0; i < BTTV_CTLS; i++) - if (bttv_ctls[i].id == c->id) - break; - if (i == BTTV_CTLS) { - *c = no_ctl; - return 0; - } - *c = bttv_ctls[i]; - if (!btv->volume_gpio && - (bttv_ctls[i].id == V4L2_CID_AUDIO_VOLUME)) - *c = no_ctl; +static int vidioc_streamoff(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + int retval; + int res = bttv_resource(fh); - return 0; - } - case VIDIOC_G_PARM: - { - struct v4l2_streamparm *parm = arg; - struct v4l2_standard s; - if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) - return -EINVAL; - memset(parm,0,sizeof(*parm)); - v4l2_video_std_construct(&s, bttv_tvnorms[btv->tvnorm].v4l2_id, - bttv_tvnorms[btv->tvnorm].name); - parm->parm.capture.timeperframe = s.frameperiod; - return 0; - } - case VIDIOC_G_TUNER: - { - struct v4l2_tuner *t = arg; - if (UNSET == bttv_tvcards[btv->c.type].tuner) - return -EINVAL; - if (0 != t->index) - return -EINVAL; - mutex_lock(&btv->lock); - memset(t,0,sizeof(*t)); - t->rxsubchans = V4L2_TUNER_SUB_MONO; - bttv_call_i2c_clients(btv, VIDIOC_G_TUNER, t); - strcpy(t->name, "Television"); - t->capability = V4L2_TUNER_CAP_NORM; - t->type = V4L2_TUNER_ANALOG_TV; - if (btread(BT848_DSTATUS)&BT848_DSTATUS_HLOC) - t->signal = 0xffff; - - if (btv->audio_mode_gpio) { - btv->audio_mode_gpio (btv,t,0); - } + retval = videobuf_streamoff(bttv_queue(fh)); + if (retval < 0) + return retval; + free_btres(btv, fh, res); + return 0; +} - mutex_unlock(&btv->lock); - return 0; - } +static int vidioc_queryctrl(struct file *file, void *priv, + struct v4l2_queryctrl *c) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + const struct v4l2_queryctrl *ctrl; - case VIDIOC_G_PRIORITY: - { - enum v4l2_priority *p = arg; + if ((c->id < V4L2_CID_BASE || + c->id >= V4L2_CID_LASTP1) && + (c->id < V4L2_CID_PRIVATE_BASE || + c->id >= V4L2_CID_PRIVATE_LASTP1)) + return -EINVAL; - *p = v4l2_prio_max(&btv->prio); - return 0; - } - case VIDIOC_S_PRIORITY: - { - enum v4l2_priority *prio = arg; + ctrl = ctrl_by_id(c->id); + *c = (NULL != ctrl) ? *ctrl : no_ctl; - return v4l2_prio_change(&btv->prio, &fh->prio, *prio); - } + if (!btv->volume_gpio && + (ctrl->id == V4L2_CID_AUDIO_VOLUME)) + * c = no_ctl; - case VIDIOC_CROPCAP: - { - struct v4l2_cropcap *cap = arg; - enum v4l2_buf_type type; + return 0; +} - type = cap->type; +static int vidioc_g_parm(struct file *file, void *f, + struct v4l2_streamparm *parm) +{ + struct bttv_fh *fh = f; + struct bttv *btv = fh->btv; + struct v4l2_standard s; - if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE && - type != V4L2_BUF_TYPE_VIDEO_OVERLAY) - return -EINVAL; + if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + v4l2_video_std_construct(&s, bttv_tvnorms[btv->tvnorm].v4l2_id, + bttv_tvnorms[btv->tvnorm].name); + parm->parm.capture.timeperframe = s.frameperiod; + return 0; +} - *cap = bttv_tvnorms[btv->tvnorm].cropcap; - cap->type = type; +static int vidioc_g_tuner(struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; - return 0; - } - case VIDIOC_G_CROP: - { - struct v4l2_crop * crop = arg; + if (UNSET == bttv_tvcards[btv->c.type].tuner) + return -EINVAL; + if (0 != t->index) + return -EINVAL; - if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && - crop->type != V4L2_BUF_TYPE_VIDEO_OVERLAY) - return -EINVAL; + mutex_lock(&btv->lock); + memset(t, 0, sizeof(*t)); + t->rxsubchans = V4L2_TUNER_SUB_MONO; + bttv_call_i2c_clients(btv, VIDIOC_G_TUNER, t); + strcpy(t->name, "Television"); + t->capability = V4L2_TUNER_CAP_NORM; + t->type = V4L2_TUNER_ANALOG_TV; + if (btread(BT848_DSTATUS)&BT848_DSTATUS_HLOC) + t->signal = 0xffff; + + if (btv->audio_mode_gpio) + btv->audio_mode_gpio(btv, t, 0); - /* No fh->do_crop = 1; because btv->crop[1] may be - inconsistent with fh->width or fh->height and apps - do not expect a change here. */ + mutex_unlock(&btv->lock); + return 0; +} - crop->c = btv->crop[!!fh->do_crop].rect; +static int vidioc_g_priority(struct file *file, void *f, enum v4l2_priority *p) +{ + struct bttv_fh *fh = f; + struct bttv *btv = fh->btv; - return 0; - } - case VIDIOC_S_CROP: - { - struct v4l2_crop *crop = arg; - const struct v4l2_rect *b; - struct bttv_crop c; - __s32 b_left; - __s32 b_top; - __s32 b_right; - __s32 b_bottom; - - if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && - crop->type != V4L2_BUF_TYPE_VIDEO_OVERLAY) - return -EINVAL; + *p = v4l2_prio_max(&btv->prio); - retval = v4l2_prio_check(&btv->prio,&fh->prio); - if (0 != retval) - return retval; + return 0; +} - /* Make sure tvnorm, vbi_end and the current cropping - parameters remain consistent until we're done. Note - read() may change vbi_end in check_alloc_btres(). */ - mutex_lock(&btv->lock); +static int vidioc_s_priority(struct file *file, void *f, + enum v4l2_priority prio) +{ + struct bttv_fh *fh = f; + struct bttv *btv = fh->btv; + + return v4l2_prio_change(&btv->prio, &fh->prio, prio); +} + +static int vidioc_cropcap(struct file *file, void *priv, + struct v4l2_cropcap *cap) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + + if (cap->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && + cap->type != V4L2_BUF_TYPE_VIDEO_OVERLAY) + return -EINVAL; + + *cap = bttv_tvnorms[btv->tvnorm].cropcap; + + return 0; +} - retval = -EBUSY; +static int vidioc_g_crop(struct file *file, void *f, struct v4l2_crop *crop) +{ + struct bttv_fh *fh = f; + struct bttv *btv = fh->btv; + + if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && + crop->type != V4L2_BUF_TYPE_VIDEO_OVERLAY) + return -EINVAL; - if (locked_btres(fh->btv, VIDEO_RESOURCES)) - goto btv_unlock_and_return; + /* No fh->do_crop = 1; because btv->crop[1] may be + inconsistent with fh->width or fh->height and apps + do not expect a change here. */ - b = &bttv_tvnorms[btv->tvnorm].cropcap.bounds; + crop->c = btv->crop[!!fh->do_crop].rect; - b_left = b->left; - b_right = b_left + b->width; - b_bottom = b->top + b->height; + return 0; +} + +static int vidioc_s_crop(struct file *file, void *f, struct v4l2_crop *crop) +{ + struct bttv_fh *fh = f; + struct bttv *btv = fh->btv; + const struct v4l2_rect *b; + int retval; + struct bttv_crop c; + __s32 b_left; + __s32 b_top; + __s32 b_right; + __s32 b_bottom; - b_top = max(b->top, btv->vbi_end); - if (b_top + 32 >= b_bottom) - goto btv_unlock_and_return; + if (crop->type != V4L2_BUF_TYPE_VIDEO_CAPTURE && + crop->type != V4L2_BUF_TYPE_VIDEO_OVERLAY) + return -EINVAL; - /* Min. scaled size 48 x 32. */ - c.rect.left = clamp(crop->c.left, b_left, b_right - 48); - c.rect.left = min(c.rect.left, (__s32) MAX_HDELAY); + retval = v4l2_prio_check(&btv->prio, &fh->prio); + if (0 != retval) + return retval; - c.rect.width = clamp(crop->c.width, - 48, b_right - c.rect.left); + /* Make sure tvnorm, vbi_end and the current cropping + parameters remain consistent until we're done. Note + read() may change vbi_end in check_alloc_btres(). */ + mutex_lock(&btv->lock); - c.rect.top = clamp(crop->c.top, b_top, b_bottom - 32); - /* Top and height must be a multiple of two. */ - c.rect.top = (c.rect.top + 1) & ~1; + retval = -EBUSY; - c.rect.height = clamp(crop->c.height, - 32, b_bottom - c.rect.top); - c.rect.height = (c.rect.height + 1) & ~1; + if (locked_btres(fh->btv, VIDEO_RESOURCES)) { + mutex_unlock(&btv->lock); + return retval; + } - bttv_crop_calc_limits(&c); + b = &bttv_tvnorms[btv->tvnorm].cropcap.bounds; - btv->crop[1] = c; + b_left = b->left; + b_right = b_left + b->width; + b_bottom = b->top + b->height; + b_top = max(b->top, btv->vbi_end); + if (b_top + 32 >= b_bottom) { mutex_unlock(&btv->lock); + return retval; + } - fh->do_crop = 1; + /* Min. scaled size 48 x 32. */ + c.rect.left = clamp(crop->c.left, b_left, b_right - 48); + c.rect.left = min(c.rect.left, (__s32) MAX_HDELAY); - mutex_lock(&fh->cap.lock); + c.rect.width = clamp(crop->c.width, + 48, b_right - c.rect.left); - if (fh->width < c.min_scaled_width) { - fh->width = c.min_scaled_width; - btv->init.width = c.min_scaled_width; - } else if (fh->width > c.max_scaled_width) { - fh->width = c.max_scaled_width; - btv->init.width = c.max_scaled_width; - } + c.rect.top = clamp(crop->c.top, b_top, b_bottom - 32); + /* Top and height must be a multiple of two. */ + c.rect.top = (c.rect.top + 1) & ~1; - if (fh->height < c.min_scaled_height) { - fh->height = c.min_scaled_height; - btv->init.height = c.min_scaled_height; - } else if (fh->height > c.max_scaled_height) { - fh->height = c.max_scaled_height; - btv->init.height = c.max_scaled_height; - } + c.rect.height = clamp(crop->c.height, + 32, b_bottom - c.rect.top); + c.rect.height = (c.rect.height + 1) & ~1; - mutex_unlock(&fh->cap.lock); + bttv_crop_calc_limits(&c); - return 0; + btv->crop[1] = c; + + mutex_unlock(&btv->lock); + + fh->do_crop = 1; + + mutex_lock(&fh->cap.lock); + + if (fh->width < c.min_scaled_width) { + fh->width = c.min_scaled_width; + btv->init.width = c.min_scaled_width; + } else if (fh->width > c.max_scaled_width) { + fh->width = c.max_scaled_width; + btv->init.width = c.max_scaled_width; } - case VIDIOC_ENUMSTD: - case VIDIOC_G_STD: - case VIDIOC_S_STD: - case VIDIOC_ENUMINPUT: - case VIDIOC_G_INPUT: - case VIDIOC_S_INPUT: - case VIDIOC_S_TUNER: - case VIDIOC_G_FREQUENCY: - case VIDIOC_S_FREQUENCY: - case VIDIOC_LOG_STATUS: - case VIDIOC_G_CTRL: - case VIDIOC_S_CTRL: - case VIDIOC_DBG_G_REGISTER: - case VIDIOC_DBG_S_REGISTER: - return bttv_common_ioctls(btv,cmd,arg); - default: - return v4l_compat_translate_ioctl(inode,file,cmd,arg, - bttv_do_ioctl); + if (fh->height < c.min_scaled_height) { + fh->height = c.min_scaled_height; + btv->init.height = c.min_scaled_height; + } else if (fh->height > c.max_scaled_height) { + fh->height = c.max_scaled_height; + btv->init.height = c.max_scaled_height; } - return 0; - fh_unlock_and_return: mutex_unlock(&fh->cap.lock); - return retval; - btv_unlock_and_return: - mutex_unlock(&btv->lock); - return retval; + return 0; +} + +static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a) +{ + strcpy(a->name, "audio"); + return 0; } -static int bttv_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a) { - return video_usercopy(inode, file, cmd, arg, bttv_do_ioctl); + return 0; } static ssize_t bttv_read(struct file *file, char __user *data, @@ -3240,7 +3295,7 @@ static const struct file_operations bttv_fops = .owner = THIS_MODULE, .open = bttv_open, .release = bttv_release, - .ioctl = bttv_ioctl, + .ioctl = video_ioctl2, .compat_ioctl = v4l_compat_ioctl32, .llseek = no_llseek, .read = bttv_read, @@ -3255,6 +3310,57 @@ static struct video_device bttv_video_template = VID_TYPE_CLIPPING|VID_TYPE_SCALES, .fops = &bttv_fops, .minor = -1, + .vidioc_querycap = vidioc_querycap, + .vidioc_enum_fmt_cap = vidioc_enum_fmt_cap, + .vidioc_g_fmt_cap = vidioc_g_fmt_cap, + .vidioc_try_fmt_cap = vidioc_try_fmt_cap, + .vidioc_s_fmt_cap = vidioc_s_fmt_cap, + .vidioc_enum_fmt_overlay = vidioc_enum_fmt_overlay, + .vidioc_g_fmt_overlay = vidioc_g_fmt_overlay, + .vidioc_try_fmt_overlay = vidioc_try_fmt_overlay, + .vidioc_s_fmt_overlay = vidioc_s_fmt_overlay, + .vidioc_enum_fmt_vbi = vidioc_enum_fmt_vbi, + .vidioc_g_fmt_vbi = vidioc_g_fmt_vbi, + .vidioc_try_fmt_vbi = vidioc_try_fmt_vbi, + .vidioc_s_fmt_vbi = vidioc_s_fmt_vbi, + .vidioc_g_audio = vidioc_g_audio, + .vidioc_s_audio = vidioc_s_audio, + .vidioc_cropcap = vidioc_cropcap, + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + .vidioc_s_std = vidioc_s_std, + .vidioc_enum_input = vidioc_enum_input, + .vidioc_g_input = vidioc_g_input, + .vidioc_s_input = vidioc_s_input, + .vidioc_queryctrl = vidioc_queryctrl, + .vidioc_g_ctrl = vidioc_g_ctrl, + .vidioc_s_ctrl = vidioc_s_ctrl, + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, + .vidioc_g_tuner = vidioc_g_tuner, + .vidioc_s_tuner = vidioc_s_tuner, +#ifdef CONFIG_VIDEO_V4L1_COMPAT + .vidiocgmbuf = vidiocgmbuf, +#endif + .vidioc_g_crop = vidioc_g_crop, + .vidioc_g_crop = vidioc_g_crop, + .vidioc_s_crop = vidioc_s_crop, + .vidioc_g_fbuf = vidioc_g_fbuf, + .vidioc_s_fbuf = vidioc_s_fbuf, + .vidioc_overlay = vidioc_overlay, + .vidioc_g_priority = vidioc_g_priority, + .vidioc_s_priority = vidioc_s_priority, + .vidioc_g_parm = vidioc_g_parm, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_s_frequency = vidioc_s_frequency, + .vidioc_log_status = vidioc_log_status, + .vidioc_querystd = vidioc_querystd, + .vidioc_g_register = vidioc_g_register, + .vidioc_s_register = vidioc_s_register, + .tvnorms = BTTV_NORMS, + .current_norm = V4L2_STD_PAL, }; static struct video_device bttv_vbi_template = @@ -3301,7 +3407,7 @@ static int radio_open(struct inode *inode, struct file *file) static int radio_release(struct inode *inode, struct file *file) { - struct bttv *btv = file->private_data; + struct bttv *btv = file->private_data; struct rds_command cmd; btv->radio_user--; @@ -3311,67 +3417,116 @@ static int radio_release(struct inode *inode, struct file *file) return 0; } -static int radio_do_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, void *arg) +static int radio_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) { - struct bttv *btv = file->private_data; + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; - switch (cmd) { - case VIDIOC_QUERYCAP: - { - struct v4l2_capability *cap = arg; - - memset(cap,0,sizeof(*cap)); - strcpy(cap->driver, "bttv"); - strlcpy(cap->card, btv->radio_dev->name,sizeof(cap->card)); - sprintf(cap->bus_info,"PCI:%s",pci_name(btv->c.pci)); - cap->version = BTTV_VERSION_CODE; - cap->capabilities = V4L2_CAP_TUNER; - return 0; - } - case VIDIOC_G_TUNER: - { - struct v4l2_tuner *t = arg; + strcpy(cap->driver, "bttv"); + strlcpy(cap->card, btv->radio_dev->name, sizeof(cap->card)); + sprintf(cap->bus_info, "PCI:%s", pci_name(btv->c.pci)); + cap->version = BTTV_VERSION_CODE; + cap->capabilities = V4L2_CAP_TUNER; - if (UNSET == bttv_tvcards[btv->c.type].tuner) - return -EINVAL; - if (0 != t->index) - return -EINVAL; - mutex_lock(&btv->lock); - memset(t,0,sizeof(*t)); - strcpy(t->name, "Radio"); - t->type = V4L2_TUNER_RADIO; + return 0; +} - bttv_call_i2c_clients(btv, VIDIOC_G_TUNER, t); +static int radio_g_tuner(struct file *file, void *priv, struct v4l2_tuner *t) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; - if (btv->audio_mode_gpio) { - btv->audio_mode_gpio (btv,t,0); - } + if (UNSET == bttv_tvcards[btv->c.type].tuner) + return -EINVAL; + if (0 != t->index) + return -EINVAL; + mutex_lock(&btv->lock); + memset(t, 0, sizeof(*t)); + strcpy(t->name, "Radio"); + t->type = V4L2_TUNER_RADIO; - mutex_unlock(&btv->lock); + bttv_call_i2c_clients(btv, VIDIOC_G_TUNER, t); + + if (btv->audio_mode_gpio) + btv->audio_mode_gpio(btv, t, 0); + + mutex_unlock(&btv->lock); + + return 0; +} + +static int radio_enum_input(struct file *file, void *priv, + struct v4l2_input *i) +{ + if (i->index != 0) + return -EINVAL; + + strcpy(i->name, "Radio"); + i->type = V4L2_INPUT_TYPE_TUNER; + + return 0; +} + +static int radio_g_audio(struct file *file, void *priv, + struct v4l2_audio *a) +{ + memset(a, 0, sizeof(*a)); + strcpy(a->name, "Radio"); + return 0; +} + +static int radio_s_tuner(struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + + if (0 != t->index) + return -EINVAL; + + bttv_call_i2c_clients(btv, VIDIOC_G_TUNER, t); + return 0; +} + +static int radio_s_audio(struct file *file, void *priv, + struct v4l2_audio *a) +{ + return 0; +} + +static int radio_s_input(struct file *filp, void *priv, unsigned int i) +{ + return 0; +} + +static int radio_s_std(struct file *file, void *fh, v4l2_std_id *norm) +{ + return 0; +} + +static int radio_queryctrl(struct file *file, void *priv, + struct v4l2_queryctrl *c) +{ + const struct v4l2_queryctrl *ctrl; + + if (c->id < V4L2_CID_BASE || + c->id >= V4L2_CID_LASTP1) + return -EINVAL; + + if (c->id == V4L2_CID_AUDIO_MUTE) { + ctrl = ctrl_by_id(c->id); + *c = *ctrl; + } else + *c = no_ctl; - return 0; - } - case VIDIOC_S_TUNER: - case VIDIOC_G_FREQUENCY: - case VIDIOC_S_FREQUENCY: - case VIDIOC_G_CTRL: - case VIDIOC_S_CTRL: - case VIDIOC_LOG_STATUS: - case VIDIOC_DBG_G_REGISTER: - case VIDIOC_DBG_S_REGISTER: - return bttv_common_ioctls(btv,cmd,arg); - default: - return v4l_compat_translate_ioctl(inode,file,cmd,arg, - radio_do_ioctl); - } return 0; } -static int radio_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static int radio_g_input(struct file *filp, void *priv, unsigned int *i) { - return video_usercopy(inode, file, cmd, arg, radio_do_ioctl); + *i = 0; + return 0; } static ssize_t radio_read(struct file *file, char __user *data, @@ -3407,7 +3562,7 @@ static const struct file_operations radio_fops = .open = radio_open, .read = radio_read, .release = radio_release, - .ioctl = radio_ioctl, + .ioctl = video_ioctl2, .llseek = no_llseek, .poll = radio_poll, }; @@ -3418,6 +3573,20 @@ static struct video_device radio_template = .type = VID_TYPE_TUNER, .fops = &radio_fops, .minor = -1, + .vidioc_querycap = radio_querycap, + .vidioc_g_tuner = radio_g_tuner, + .vidioc_enum_input = radio_enum_input, + .vidioc_g_audio = radio_g_audio, + .vidioc_s_tuner = radio_s_tuner, + .vidioc_s_audio = radio_s_audio, + .vidioc_s_input = radio_s_input, + .vidioc_s_std = radio_s_std, + .vidioc_queryctrl = radio_queryctrl, + .vidioc_g_input = radio_g_input, + .vidioc_g_ctrl = vidioc_g_ctrl, + .vidioc_s_ctrl = vidioc_s_ctrl, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_s_frequency = vidioc_s_frequency, }; /* ----------------------------------------------------------------------- */ diff --git a/drivers/media/video/bt8xx/bttv-vbi.c b/drivers/media/video/bt8xx/bttv-vbi.c index b924f05e3b74..da2708176aad 100644 --- a/drivers/media/video/bt8xx/bttv-vbi.c +++ b/drivers/media/video/bt8xx/bttv-vbi.c @@ -236,10 +236,8 @@ struct videobuf_queue_ops bttv_vbi_qops = { /* ----------------------------------------------------------------------- */ -static int -try_fmt (struct v4l2_vbi_format * f, - const struct bttv_tvnorm * tvnorm, - __s32 crop_start) +static int try_fmt(struct v4l2_vbi_format *f, const struct bttv_tvnorm *tvnorm, + __s32 crop_start) { __s32 min_start, max_start, max_end, f2_offset; unsigned int i; @@ -305,10 +303,9 @@ try_fmt (struct v4l2_vbi_format * f, return 0; } -int -bttv_vbi_try_fmt (struct bttv_fh * fh, - struct v4l2_vbi_format * f) +int vidioc_try_fmt_vbi(struct file *file, void *f, struct v4l2_format *frt) { + struct bttv_fh *fh = f; struct bttv *btv = fh->btv; const struct bttv_tvnorm *tvnorm; __s32 crop_start; @@ -320,13 +317,13 @@ bttv_vbi_try_fmt (struct bttv_fh * fh, mutex_unlock(&btv->lock); - return try_fmt(f, tvnorm, crop_start); + return try_fmt(&frt->fmt.vbi, tvnorm, crop_start); } -int -bttv_vbi_set_fmt (struct bttv_fh * fh, - struct v4l2_vbi_format * f) + +int vidioc_s_fmt_vbi(struct file *file, void *f, struct v4l2_format *frt) { + struct bttv_fh *fh = f; struct bttv *btv = fh->btv; const struct bttv_tvnorm *tvnorm; __s32 start1, end; @@ -340,11 +337,12 @@ bttv_vbi_set_fmt (struct bttv_fh * fh, tvnorm = &bttv_tvnorms[btv->tvnorm]; - rc = try_fmt(f, tvnorm, btv->crop_start); + rc = try_fmt(&frt->fmt.vbi, tvnorm, btv->crop_start); if (0 != rc) goto fail; - start1 = f->start[1] - tvnorm->vbistart[1] + tvnorm->vbistart[0]; + start1 = frt->fmt.vbi.start[1] - tvnorm->vbistart[1] + + tvnorm->vbistart[0]; /* First possible line of video capturing. Should be max(f->start[0] + f->count[0], start1 + f->count[1]) * 2 @@ -352,11 +350,11 @@ bttv_vbi_set_fmt (struct bttv_fh * fh, pretend the VBI and video capture window may overlap, so end = start + 1, the lowest possible value, times two because vbi_fmt.end counts field lines times two. */ - end = max(f->start[0], start1) * 2 + 2; + end = max(frt->fmt.vbi.start[0], start1) * 2 + 2; mutex_lock(&fh->vbi.lock); - fh->vbi_fmt.fmt = *f; + fh->vbi_fmt.fmt = frt->fmt.vbi; fh->vbi_fmt.tvnorm = tvnorm; fh->vbi_fmt.end = end; @@ -370,13 +368,13 @@ bttv_vbi_set_fmt (struct bttv_fh * fh, return rc; } -void -bttv_vbi_get_fmt (struct bttv_fh * fh, - struct v4l2_vbi_format * f) + +int vidioc_g_fmt_vbi(struct file *file, void *f, struct v4l2_format *frt) { + struct bttv_fh *fh = f; const struct bttv_tvnorm *tvnorm; - *f = fh->vbi_fmt.fmt; + frt->fmt.vbi = fh->vbi_fmt.fmt; tvnorm = &bttv_tvnorms[fh->btv->tvnorm]; @@ -391,28 +389,28 @@ bttv_vbi_get_fmt (struct bttv_fh * fh, max_end = (tvnorm->cropcap.bounds.top + tvnorm->cropcap.bounds.height) >> 1; - f->sampling_rate = tvnorm->Fsc; + frt->fmt.vbi.sampling_rate = tvnorm->Fsc; for (i = 0; i < 2; ++i) { __s32 new_start; - new_start = f->start[i] + new_start = frt->fmt.vbi.start[i] + tvnorm->vbistart[i] - fh->vbi_fmt.tvnorm->vbistart[i]; - f->start[i] = min(new_start, max_end - 1); - f->count[i] = min((__s32) f->count[i], - max_end - f->start[i]); + frt->fmt.vbi.start[i] = min(new_start, max_end - 1); + frt->fmt.vbi.count[i] = + min((__s32) frt->fmt.vbi.count[i], + max_end - frt->fmt.vbi.start[i]); max_end += tvnorm->vbistart[1] - tvnorm->vbistart[0]; } } + return 0; } -void -bttv_vbi_fmt_reset (struct bttv_vbi_fmt * f, - int norm) +void bttv_vbi_fmt_reset(struct bttv_vbi_fmt *f, int norm) { const struct bttv_tvnorm *tvnorm; unsigned int real_samples_per_line; diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h index 4a02f0a8a467..260303065c13 100644 --- a/drivers/media/video/bt8xx/bttvp.h +++ b/drivers/media/video/bt8xx/bttvp.h @@ -84,6 +84,11 @@ #define clamp(x, low, high) min (max (low, x), high) +#define BTTV_NORMS (\ + V4L2_STD_PAL | V4L2_STD_PAL_N | \ + V4L2_STD_PAL_Nc | V4L2_STD_SECAM | \ + V4L2_STD_NTSC | V4L2_STD_PAL_M | \ + V4L2_STD_PAL_60) /* ---------------------------------------------------------- */ struct bttv_tvnorm { @@ -252,9 +257,9 @@ int bttv_overlay_risc(struct bttv *btv, struct bttv_overlay *ov, /* ---------------------------------------------------------- */ /* bttv-vbi.c */ -int bttv_vbi_try_fmt(struct bttv_fh *fh, struct v4l2_vbi_format *f); -void bttv_vbi_get_fmt(struct bttv_fh *fh, struct v4l2_vbi_format *f); -int bttv_vbi_set_fmt(struct bttv_fh *fh, struct v4l2_vbi_format *f); +int vidioc_try_fmt_vbi(struct file *file, void *fh, struct v4l2_format *f); +int vidioc_g_fmt_vbi(struct file *file, void *fh, struct v4l2_format *f); +int vidioc_s_fmt_vbi(struct file *file, void *fh, struct v4l2_format *f); extern struct videobuf_queue_ops bttv_vbi_qops; -- cgit v1.2.3-59-g8ed1b From e5ae3db461f2de1f4fb455bc73c059c0b97b1230 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 27 Dec 2007 22:22:59 -0300 Subject: V4L/DVB (6912): Replace vidioc_ to bttv_ Since there are a few vidioc_ functions that were exported, rename those functions to bttv_ in order to avoid poluting namespace. The other functions were also renamed, to standardize inside the driver. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bt8xx/bttv-driver.c | 186 ++++++++++++++++---------------- drivers/media/video/bt8xx/bttv-vbi.c | 6 +- drivers/media/video/bt8xx/bttvp.h | 6 +- 3 files changed, 99 insertions(+), 99 deletions(-) diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index d6a305ddc53e..30cc2d3ba52d 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -1680,7 +1680,7 @@ static struct videobuf_queue_ops bttv_video_qops = { .buf_release = buffer_release, }; -static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *id) +static int bttv_s_std(struct file *file, void *priv, v4l2_std_id *id) { struct bttv_fh *fh = priv; struct bttv *btv = fh->btv; @@ -1704,7 +1704,7 @@ static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *id) return 0; } -static int vidioc_querystd(struct file *file, void *f, v4l2_std_id *id) +static int bttv_querystd(struct file *file, void *f, v4l2_std_id *id) { struct bttv_fh *fh = f; struct bttv *btv = fh->btv; @@ -1716,7 +1716,7 @@ static int vidioc_querystd(struct file *file, void *f, v4l2_std_id *id) return 0; } -static int vidioc_enum_input(struct file *file, void *priv, +static int bttv_enum_input(struct file *file, void *priv, struct v4l2_input *i) { struct bttv_fh *fh = priv; @@ -1758,7 +1758,7 @@ static int vidioc_enum_input(struct file *file, void *priv, return 0; } -static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) +static int bttv_g_input(struct file *file, void *priv, unsigned int *i) { struct bttv_fh *fh = priv; struct bttv *btv = fh->btv; @@ -1767,7 +1767,7 @@ static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) return 0; } -static int vidioc_s_input(struct file *file, void *priv, unsigned int i) +static int bttv_s_input(struct file *file, void *priv, unsigned int i) { struct bttv_fh *fh = priv; struct bttv *btv = fh->btv; @@ -1787,7 +1787,7 @@ static int vidioc_s_input(struct file *file, void *priv, unsigned int i) return 0; } -static int vidioc_s_tuner(struct file *file, void *priv, +static int bttv_s_tuner(struct file *file, void *priv, struct v4l2_tuner *t) { struct bttv_fh *fh = priv; @@ -1815,7 +1815,7 @@ static int vidioc_s_tuner(struct file *file, void *priv, return 0; } -static int vidioc_g_frequency(struct file *file, void *priv, +static int bttv_g_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { struct bttv_fh *fh = priv; @@ -1832,7 +1832,7 @@ static int vidioc_g_frequency(struct file *file, void *priv, return 0; } -static int vidioc_s_frequency(struct file *file, void *priv, +static int bttv_s_frequency(struct file *file, void *priv, struct v4l2_frequency *f) { struct bttv_fh *fh = priv; @@ -1856,7 +1856,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, return 0; } -static int vidioc_log_status(struct file *file, void *f) +static int bttv_log_status(struct file *file, void *f) { struct bttv_fh *fh = f; struct bttv *btv = fh->btv; @@ -1869,7 +1869,7 @@ static int vidioc_log_status(struct file *file, void *f) return 0; } -static int vidioc_g_ctrl(struct file *file, void *priv, +static int bttv_g_ctrl(struct file *file, void *priv, struct v4l2_control *c) { struct bttv_fh *fh = priv; @@ -1936,7 +1936,7 @@ static int vidioc_g_ctrl(struct file *file, void *priv, return 0; } -static int vidioc_s_ctrl(struct file *file, void *f, +static int bttv_s_ctrl(struct file *file, void *f, struct v4l2_control *c) { int err; @@ -2034,7 +2034,7 @@ static int vidioc_s_ctrl(struct file *file, void *f, } #ifdef CONFIG_VIDEO_ADV_DEBUG -static int vidioc_g_register(struct file *file, void *f, +static int bttv_g_register(struct file *file, void *f, struct v4l2_register *reg) { struct bttv_fh *fh = f; @@ -2053,7 +2053,7 @@ static int vidioc_g_register(struct file *file, void *f, return 0; } -static int vidioc_s_register(struct file *file, void *f, +static int bttv_s_register(struct file *file, void *f, struct v4l2_register *reg) { struct bttv_fh *fh = f; @@ -2447,7 +2447,7 @@ pix_format_set_size (struct v4l2_pix_format * f, } } -static int vidioc_g_fmt_cap(struct file *file, void *priv, +static int bttv_g_fmt_cap(struct file *file, void *priv, struct v4l2_format *f) { struct bttv_fh *fh = priv; @@ -2460,7 +2460,7 @@ static int vidioc_g_fmt_cap(struct file *file, void *priv, return 0; } -static int vidioc_g_fmt_overlay(struct file *file, void *priv, +static int bttv_g_fmt_overlay(struct file *file, void *priv, struct v4l2_format *f) { struct bttv_fh *fh = priv; @@ -2471,7 +2471,7 @@ static int vidioc_g_fmt_overlay(struct file *file, void *priv, return 0; } -static int vidioc_try_fmt_cap(struct file *file, void *priv, +static int bttv_try_fmt_cap(struct file *file, void *priv, struct v4l2_format *f) { const struct bttv_format *fmt; @@ -2522,7 +2522,7 @@ static int vidioc_try_fmt_cap(struct file *file, void *priv, return 0; } -static int vidioc_try_fmt_overlay(struct file *file, void *priv, +static int bttv_try_fmt_overlay(struct file *file, void *priv, struct v4l2_format *f) { struct bttv_fh *fh = priv; @@ -2532,7 +2532,7 @@ static int vidioc_try_fmt_overlay(struct file *file, void *priv, /* adjust_crop */ 0); } -static int vidioc_s_fmt_cap(struct file *file, void *priv, +static int bttv_s_fmt_cap(struct file *file, void *priv, struct v4l2_format *f) { int retval; @@ -2544,7 +2544,7 @@ static int vidioc_s_fmt_cap(struct file *file, void *priv, if (0 != retval) return retval; - retval = vidioc_try_fmt_cap(file, priv, f); + retval = bttv_try_fmt_cap(file, priv, f); if (0 != retval) return retval; @@ -2565,7 +2565,7 @@ static int vidioc_s_fmt_cap(struct file *file, void *priv, return 0; } -static int vidioc_s_fmt_overlay(struct file *file, void *priv, +static int bttv_s_fmt_overlay(struct file *file, void *priv, struct v4l2_format *f) { struct bttv_fh *fh = priv; @@ -2605,7 +2605,7 @@ static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf) } #endif -static int vidioc_querycap(struct file *file, void *priv, +static int bttv_querycap(struct file *file, void *priv, struct v4l2_capability *cap) { struct bttv_fh *fh = priv; @@ -2633,7 +2633,7 @@ static int vidioc_querycap(struct file *file, void *priv, return 0; } -static int vidioc_enum_fmt_cap(struct file *file, void *priv, +static int bttv_enum_fmt_cap(struct file *file, void *priv, struct v4l2_fmtdesc *f) { if (f->index >= FORMATS) @@ -2645,7 +2645,7 @@ static int vidioc_enum_fmt_cap(struct file *file, void *priv, return 0; } -static int vidioc_enum_fmt_overlay(struct file *file, void *priv, +static int bttv_enum_fmt_overlay(struct file *file, void *priv, struct v4l2_fmtdesc *f) { if (no_overlay > 0) { @@ -2664,7 +2664,7 @@ static int vidioc_enum_fmt_overlay(struct file *file, void *priv, return 0; } -static int vidioc_enum_fmt_vbi(struct file *file, void *priv, +static int bttv_enum_fmt_vbi(struct file *file, void *priv, struct v4l2_fmtdesc *f) { if (0 != f->index) @@ -2676,7 +2676,7 @@ static int vidioc_enum_fmt_vbi(struct file *file, void *priv, return 0; } -static int vidioc_g_fbuf(struct file *file, void *f, +static int bttv_g_fbuf(struct file *file, void *f, struct v4l2_framebuffer *fb) { struct bttv_fh *fh = f; @@ -2689,7 +2689,7 @@ static int vidioc_g_fbuf(struct file *file, void *f, return 0; } -static int vidioc_overlay(struct file *file, void *f, unsigned int on) +static int bttv_overlay(struct file *file, void *f, unsigned int on) { struct bttv_fh *fh = f; struct bttv *btv = fh->btv; @@ -2724,7 +2724,7 @@ static int vidioc_overlay(struct file *file, void *f, unsigned int on) return retval; } -static int vidioc_s_fbuf(struct file *file, void *f, +static int bttv_s_fbuf(struct file *file, void *f, struct v4l2_framebuffer *fb) { struct bttv_fh *fh = f; @@ -2795,21 +2795,21 @@ static int vidioc_s_fbuf(struct file *file, void *f, return retval; } -static int vidioc_reqbufs(struct file *file, void *priv, +static int bttv_reqbufs(struct file *file, void *priv, struct v4l2_requestbuffers *p) { struct bttv_fh *fh = priv; return videobuf_reqbufs(bttv_queue(fh), p); } -static int vidioc_querybuf(struct file *file, void *priv, +static int bttv_querybuf(struct file *file, void *priv, struct v4l2_buffer *b) { struct bttv_fh *fh = priv; return videobuf_querybuf(bttv_queue(fh), b); } -static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b) +static int bttv_qbuf(struct file *file, void *priv, struct v4l2_buffer *b) { struct bttv_fh *fh = priv; struct bttv *btv = fh->btv; @@ -2821,14 +2821,14 @@ static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b) return videobuf_qbuf(bttv_queue(fh), b); } -static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) +static int bttv_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) { struct bttv_fh *fh = priv; return videobuf_dqbuf(bttv_queue(fh), b, file->f_flags & O_NONBLOCK); } -static int vidioc_streamon(struct file *file, void *priv, +static int bttv_streamon(struct file *file, void *priv, enum v4l2_buf_type type) { struct bttv_fh *fh = priv; @@ -2841,7 +2841,7 @@ static int vidioc_streamon(struct file *file, void *priv, } -static int vidioc_streamoff(struct file *file, void *priv, +static int bttv_streamoff(struct file *file, void *priv, enum v4l2_buf_type type) { struct bttv_fh *fh = priv; @@ -2857,7 +2857,7 @@ static int vidioc_streamoff(struct file *file, void *priv, return 0; } -static int vidioc_queryctrl(struct file *file, void *priv, +static int bttv_queryctrl(struct file *file, void *priv, struct v4l2_queryctrl *c) { struct bttv_fh *fh = priv; @@ -2880,7 +2880,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, return 0; } -static int vidioc_g_parm(struct file *file, void *f, +static int bttv_g_parm(struct file *file, void *f, struct v4l2_streamparm *parm) { struct bttv_fh *fh = f; @@ -2895,7 +2895,7 @@ static int vidioc_g_parm(struct file *file, void *f, return 0; } -static int vidioc_g_tuner(struct file *file, void *priv, +static int bttv_g_tuner(struct file *file, void *priv, struct v4l2_tuner *t) { struct bttv_fh *fh = priv; @@ -2923,7 +2923,7 @@ static int vidioc_g_tuner(struct file *file, void *priv, return 0; } -static int vidioc_g_priority(struct file *file, void *f, enum v4l2_priority *p) +static int bttv_g_priority(struct file *file, void *f, enum v4l2_priority *p) { struct bttv_fh *fh = f; struct bttv *btv = fh->btv; @@ -2933,7 +2933,7 @@ static int vidioc_g_priority(struct file *file, void *f, enum v4l2_priority *p) return 0; } -static int vidioc_s_priority(struct file *file, void *f, +static int bttv_s_priority(struct file *file, void *f, enum v4l2_priority prio) { struct bttv_fh *fh = f; @@ -2942,7 +2942,7 @@ static int vidioc_s_priority(struct file *file, void *f, return v4l2_prio_change(&btv->prio, &fh->prio, prio); } -static int vidioc_cropcap(struct file *file, void *priv, +static int bttv_cropcap(struct file *file, void *priv, struct v4l2_cropcap *cap) { struct bttv_fh *fh = priv; @@ -2957,7 +2957,7 @@ static int vidioc_cropcap(struct file *file, void *priv, return 0; } -static int vidioc_g_crop(struct file *file, void *f, struct v4l2_crop *crop) +static int bttv_g_crop(struct file *file, void *f, struct v4l2_crop *crop) { struct bttv_fh *fh = f; struct bttv *btv = fh->btv; @@ -2975,7 +2975,7 @@ static int vidioc_g_crop(struct file *file, void *f, struct v4l2_crop *crop) return 0; } -static int vidioc_s_crop(struct file *file, void *f, struct v4l2_crop *crop) +static int bttv_s_crop(struct file *file, void *f, struct v4l2_crop *crop) { struct bttv_fh *fh = f; struct bttv *btv = fh->btv; @@ -3065,13 +3065,13 @@ static int vidioc_s_crop(struct file *file, void *f, struct v4l2_crop *crop) return 0; } -static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a) +static int bttv_g_audio(struct file *file, void *priv, struct v4l2_audio *a) { strcpy(a->name, "audio"); return 0; } -static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a) +static int bttv_s_audio(struct file *file, void *priv, struct v4l2_audio *a) { return 0; } @@ -3310,55 +3310,55 @@ static struct video_device bttv_video_template = VID_TYPE_CLIPPING|VID_TYPE_SCALES, .fops = &bttv_fops, .minor = -1, - .vidioc_querycap = vidioc_querycap, - .vidioc_enum_fmt_cap = vidioc_enum_fmt_cap, - .vidioc_g_fmt_cap = vidioc_g_fmt_cap, - .vidioc_try_fmt_cap = vidioc_try_fmt_cap, - .vidioc_s_fmt_cap = vidioc_s_fmt_cap, - .vidioc_enum_fmt_overlay = vidioc_enum_fmt_overlay, - .vidioc_g_fmt_overlay = vidioc_g_fmt_overlay, - .vidioc_try_fmt_overlay = vidioc_try_fmt_overlay, - .vidioc_s_fmt_overlay = vidioc_s_fmt_overlay, - .vidioc_enum_fmt_vbi = vidioc_enum_fmt_vbi, - .vidioc_g_fmt_vbi = vidioc_g_fmt_vbi, - .vidioc_try_fmt_vbi = vidioc_try_fmt_vbi, - .vidioc_s_fmt_vbi = vidioc_s_fmt_vbi, - .vidioc_g_audio = vidioc_g_audio, - .vidioc_s_audio = vidioc_s_audio, - .vidioc_cropcap = vidioc_cropcap, - .vidioc_reqbufs = vidioc_reqbufs, - .vidioc_querybuf = vidioc_querybuf, - .vidioc_qbuf = vidioc_qbuf, - .vidioc_dqbuf = vidioc_dqbuf, - .vidioc_s_std = vidioc_s_std, - .vidioc_enum_input = vidioc_enum_input, - .vidioc_g_input = vidioc_g_input, - .vidioc_s_input = vidioc_s_input, - .vidioc_queryctrl = vidioc_queryctrl, - .vidioc_g_ctrl = vidioc_g_ctrl, - .vidioc_s_ctrl = vidioc_s_ctrl, - .vidioc_streamon = vidioc_streamon, - .vidioc_streamoff = vidioc_streamoff, - .vidioc_g_tuner = vidioc_g_tuner, - .vidioc_s_tuner = vidioc_s_tuner, + .vidioc_querycap = bttv_querycap, + .vidioc_enum_fmt_cap = bttv_enum_fmt_cap, + .vidioc_g_fmt_cap = bttv_g_fmt_cap, + .vidioc_try_fmt_cap = bttv_try_fmt_cap, + .vidioc_s_fmt_cap = bttv_s_fmt_cap, + .vidioc_enum_fmt_overlay = bttv_enum_fmt_overlay, + .vidioc_g_fmt_overlay = bttv_g_fmt_overlay, + .vidioc_try_fmt_overlay = bttv_try_fmt_overlay, + .vidioc_s_fmt_overlay = bttv_s_fmt_overlay, + .vidioc_enum_fmt_vbi = bttv_enum_fmt_vbi, + .vidioc_g_fmt_vbi = bttv_g_fmt_vbi, + .vidioc_try_fmt_vbi = bttv_try_fmt_vbi, + .vidioc_s_fmt_vbi = bttv_s_fmt_vbi, + .vidioc_g_audio = bttv_g_audio, + .vidioc_s_audio = bttv_s_audio, + .vidioc_cropcap = bttv_cropcap, + .vidioc_reqbufs = bttv_reqbufs, + .vidioc_querybuf = bttv_querybuf, + .vidioc_qbuf = bttv_qbuf, + .vidioc_dqbuf = bttv_dqbuf, + .vidioc_s_std = bttv_s_std, + .vidioc_enum_input = bttv_enum_input, + .vidioc_g_input = bttv_g_input, + .vidioc_s_input = bttv_s_input, + .vidioc_queryctrl = bttv_queryctrl, + .vidioc_g_ctrl = bttv_g_ctrl, + .vidioc_s_ctrl = bttv_s_ctrl, + .vidioc_streamon = bttv_streamon, + .vidioc_streamoff = bttv_streamoff, + .vidioc_g_tuner = bttv_g_tuner, + .vidioc_s_tuner = bttv_s_tuner, #ifdef CONFIG_VIDEO_V4L1_COMPAT .vidiocgmbuf = vidiocgmbuf, #endif - .vidioc_g_crop = vidioc_g_crop, - .vidioc_g_crop = vidioc_g_crop, - .vidioc_s_crop = vidioc_s_crop, - .vidioc_g_fbuf = vidioc_g_fbuf, - .vidioc_s_fbuf = vidioc_s_fbuf, - .vidioc_overlay = vidioc_overlay, - .vidioc_g_priority = vidioc_g_priority, - .vidioc_s_priority = vidioc_s_priority, - .vidioc_g_parm = vidioc_g_parm, - .vidioc_g_frequency = vidioc_g_frequency, - .vidioc_s_frequency = vidioc_s_frequency, - .vidioc_log_status = vidioc_log_status, - .vidioc_querystd = vidioc_querystd, - .vidioc_g_register = vidioc_g_register, - .vidioc_s_register = vidioc_s_register, + .vidioc_g_crop = bttv_g_crop, + .vidioc_g_crop = bttv_g_crop, + .vidioc_s_crop = bttv_s_crop, + .vidioc_g_fbuf = bttv_g_fbuf, + .vidioc_s_fbuf = bttv_s_fbuf, + .vidioc_overlay = bttv_overlay, + .vidioc_g_priority = bttv_g_priority, + .vidioc_s_priority = bttv_s_priority, + .vidioc_g_parm = bttv_g_parm, + .vidioc_g_frequency = bttv_g_frequency, + .vidioc_s_frequency = bttv_s_frequency, + .vidioc_log_status = bttv_log_status, + .vidioc_querystd = bttv_querystd, + .vidioc_g_register = bttv_g_register, + .vidioc_s_register = bttv_s_register, .tvnorms = BTTV_NORMS, .current_norm = V4L2_STD_PAL, }; @@ -3583,10 +3583,10 @@ static struct video_device radio_template = .vidioc_s_std = radio_s_std, .vidioc_queryctrl = radio_queryctrl, .vidioc_g_input = radio_g_input, - .vidioc_g_ctrl = vidioc_g_ctrl, - .vidioc_s_ctrl = vidioc_s_ctrl, - .vidioc_g_frequency = vidioc_g_frequency, - .vidioc_s_frequency = vidioc_s_frequency, + .vidioc_g_ctrl = bttv_g_ctrl, + .vidioc_s_ctrl = bttv_s_ctrl, + .vidioc_g_frequency = bttv_g_frequency, + .vidioc_s_frequency = bttv_s_frequency, }; /* ----------------------------------------------------------------------- */ diff --git a/drivers/media/video/bt8xx/bttv-vbi.c b/drivers/media/video/bt8xx/bttv-vbi.c index da2708176aad..1f0cc79e2a33 100644 --- a/drivers/media/video/bt8xx/bttv-vbi.c +++ b/drivers/media/video/bt8xx/bttv-vbi.c @@ -303,7 +303,7 @@ static int try_fmt(struct v4l2_vbi_format *f, const struct bttv_tvnorm *tvnorm, return 0; } -int vidioc_try_fmt_vbi(struct file *file, void *f, struct v4l2_format *frt) +int bttv_try_fmt_vbi(struct file *file, void *f, struct v4l2_format *frt) { struct bttv_fh *fh = f; struct bttv *btv = fh->btv; @@ -321,7 +321,7 @@ int vidioc_try_fmt_vbi(struct file *file, void *f, struct v4l2_format *frt) } -int vidioc_s_fmt_vbi(struct file *file, void *f, struct v4l2_format *frt) +int bttv_s_fmt_vbi(struct file *file, void *f, struct v4l2_format *frt) { struct bttv_fh *fh = f; struct bttv *btv = fh->btv; @@ -369,7 +369,7 @@ int vidioc_s_fmt_vbi(struct file *file, void *f, struct v4l2_format *frt) } -int vidioc_g_fmt_vbi(struct file *file, void *f, struct v4l2_format *frt) +int bttv_g_fmt_vbi(struct file *file, void *f, struct v4l2_format *frt) { struct bttv_fh *fh = f; const struct bttv_tvnorm *tvnorm; diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h index 260303065c13..1305d315cfc5 100644 --- a/drivers/media/video/bt8xx/bttvp.h +++ b/drivers/media/video/bt8xx/bttvp.h @@ -257,9 +257,9 @@ int bttv_overlay_risc(struct bttv *btv, struct bttv_overlay *ov, /* ---------------------------------------------------------- */ /* bttv-vbi.c */ -int vidioc_try_fmt_vbi(struct file *file, void *fh, struct v4l2_format *f); -int vidioc_g_fmt_vbi(struct file *file, void *fh, struct v4l2_format *f); -int vidioc_s_fmt_vbi(struct file *file, void *fh, struct v4l2_format *f); +int bttv_try_fmt_vbi(struct file *file, void *fh, struct v4l2_format *f); +int bttv_g_fmt_vbi(struct file *file, void *fh, struct v4l2_format *f); +int bttv_s_fmt_vbi(struct file *file, void *fh, struct v4l2_format *f); extern struct videobuf_queue_ops bttv_vbi_qops; -- cgit v1.2.3-59-g8ed1b From 04a94d3ca25030d7c1fa27f3db3b90eb5a7985b0 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 27 Dec 2007 22:23:34 -0300 Subject: V4L/DVB (6913): Preserve the previous order to make easier to check the conversion Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bt8xx/bttv-driver.c | 355 ++++++++++++++++---------------- 1 file changed, 178 insertions(+), 177 deletions(-) diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 30cc2d3ba52d..c8f958151677 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -1442,6 +1442,170 @@ static void bttv_reinit_bt848(struct bttv *btv) set_input(btv, btv->input, btv->tvnorm); } +static int bttv_g_ctrl(struct file *file, void *priv, + struct v4l2_control *c) +{ + struct bttv_fh *fh = priv; + struct bttv *btv = fh->btv; + + switch (c->id) { + case V4L2_CID_BRIGHTNESS: + c->value = btv->bright; + break; + case V4L2_CID_HUE: + c->value = btv->hue; + break; + case V4L2_CID_CONTRAST: + c->value = btv->contrast; + break; + case V4L2_CID_SATURATION: + c->value = btv->saturation; + break; + + case V4L2_CID_AUDIO_MUTE: + case V4L2_CID_AUDIO_VOLUME: + case V4L2_CID_AUDIO_BALANCE: + case V4L2_CID_AUDIO_BASS: + case V4L2_CID_AUDIO_TREBLE: + bttv_call_i2c_clients(btv, VIDIOC_G_CTRL, c); + break; + + case V4L2_CID_PRIVATE_CHROMA_AGC: + c->value = btv->opt_chroma_agc; + break; + case V4L2_CID_PRIVATE_COMBFILTER: + c->value = btv->opt_combfilter; + break; + case V4L2_CID_PRIVATE_LUMAFILTER: + c->value = btv->opt_lumafilter; + break; + case V4L2_CID_PRIVATE_AUTOMUTE: + c->value = btv->opt_automute; + break; + case V4L2_CID_PRIVATE_AGC_CRUSH: + c->value = btv->opt_adc_crush; + break; + case V4L2_CID_PRIVATE_VCR_HACK: + c->value = btv->opt_vcr_hack; + break; + case V4L2_CID_PRIVATE_WHITECRUSH_UPPER: + c->value = btv->opt_whitecrush_upper; + break; + case V4L2_CID_PRIVATE_WHITECRUSH_LOWER: + c->value = btv->opt_whitecrush_lower; + break; + case V4L2_CID_PRIVATE_UV_RATIO: + c->value = btv->opt_uv_ratio; + break; + case V4L2_CID_PRIVATE_FULL_LUMA_RANGE: + c->value = btv->opt_full_luma_range; + break; + case V4L2_CID_PRIVATE_CORING: + c->value = btv->opt_coring; + break; + default: + return -EINVAL; + } + return 0; +} + +static int bttv_s_ctrl(struct file *file, void *f, + struct v4l2_control *c) +{ + int err; + int val; + struct bttv_fh *fh = f; + struct bttv *btv = fh->btv; + + err = v4l2_prio_check(&btv->prio, &fh->prio); + if (0 != err) + return err; + + switch (c->id) { + case V4L2_CID_BRIGHTNESS: + bt848_bright(btv, c->value); + break; + case V4L2_CID_HUE: + bt848_hue(btv, c->value); + break; + case V4L2_CID_CONTRAST: + bt848_contrast(btv, c->value); + break; + case V4L2_CID_SATURATION: + bt848_sat(btv, c->value); + break; + case V4L2_CID_AUDIO_MUTE: + audio_mute(btv, c->value); + /* fall through */ + case V4L2_CID_AUDIO_VOLUME: + if (btv->volume_gpio) + btv->volume_gpio(btv, c->value); + + bttv_call_i2c_clients(btv, VIDIOC_S_CTRL, c); + break; + case V4L2_CID_AUDIO_BALANCE: + case V4L2_CID_AUDIO_BASS: + case V4L2_CID_AUDIO_TREBLE: + bttv_call_i2c_clients(btv, VIDIOC_S_CTRL, c); + break; + + case V4L2_CID_PRIVATE_CHROMA_AGC: + btv->opt_chroma_agc = c->value; + val = btv->opt_chroma_agc ? BT848_SCLOOP_CAGC : 0; + btwrite(val, BT848_E_SCLOOP); + btwrite(val, BT848_O_SCLOOP); + break; + case V4L2_CID_PRIVATE_COMBFILTER: + btv->opt_combfilter = c->value; + break; + case V4L2_CID_PRIVATE_LUMAFILTER: + btv->opt_lumafilter = c->value; + if (btv->opt_lumafilter) { + btand(~BT848_CONTROL_LDEC, BT848_E_CONTROL); + btand(~BT848_CONTROL_LDEC, BT848_O_CONTROL); + } else { + btor(BT848_CONTROL_LDEC, BT848_E_CONTROL); + btor(BT848_CONTROL_LDEC, BT848_O_CONTROL); + } + break; + case V4L2_CID_PRIVATE_AUTOMUTE: + btv->opt_automute = c->value; + break; + case V4L2_CID_PRIVATE_AGC_CRUSH: + btv->opt_adc_crush = c->value; + btwrite(BT848_ADC_RESERVED | + (btv->opt_adc_crush ? BT848_ADC_CRUSH : 0), + BT848_ADC); + break; + case V4L2_CID_PRIVATE_VCR_HACK: + btv->opt_vcr_hack = c->value; + break; + case V4L2_CID_PRIVATE_WHITECRUSH_UPPER: + btv->opt_whitecrush_upper = c->value; + btwrite(c->value, BT848_WC_UP); + break; + case V4L2_CID_PRIVATE_WHITECRUSH_LOWER: + btv->opt_whitecrush_lower = c->value; + btwrite(c->value, BT848_WC_DOWN); + break; + case V4L2_CID_PRIVATE_UV_RATIO: + btv->opt_uv_ratio = c->value; + bt848_sat(btv, btv->saturation); + break; + case V4L2_CID_PRIVATE_FULL_LUMA_RANGE: + btv->opt_full_luma_range = c->value; + btaor((c->value<<7), ~BT848_OFORM_RANGE, BT848_OFORM); + break; + case V4L2_CID_PRIVATE_CORING: + btv->opt_coring = c->value; + btaor((c->value<<5), ~BT848_OFORM_CORE32, BT848_OFORM); + break; + default: + return -EINVAL; + } + return 0; +} + /* ----------------------------------------------------------------------- */ void bttv_gpio_tracking(struct bttv *btv, char *comment) @@ -1869,170 +2033,6 @@ static int bttv_log_status(struct file *file, void *f) return 0; } -static int bttv_g_ctrl(struct file *file, void *priv, - struct v4l2_control *c) -{ - struct bttv_fh *fh = priv; - struct bttv *btv = fh->btv; - - switch (c->id) { - case V4L2_CID_BRIGHTNESS: - c->value = btv->bright; - break; - case V4L2_CID_HUE: - c->value = btv->hue; - break; - case V4L2_CID_CONTRAST: - c->value = btv->contrast; - break; - case V4L2_CID_SATURATION: - c->value = btv->saturation; - break; - - case V4L2_CID_AUDIO_MUTE: - case V4L2_CID_AUDIO_VOLUME: - case V4L2_CID_AUDIO_BALANCE: - case V4L2_CID_AUDIO_BASS: - case V4L2_CID_AUDIO_TREBLE: - bttv_call_i2c_clients(btv, VIDIOC_G_CTRL, c); - break; - - case V4L2_CID_PRIVATE_CHROMA_AGC: - c->value = btv->opt_chroma_agc; - break; - case V4L2_CID_PRIVATE_COMBFILTER: - c->value = btv->opt_combfilter; - break; - case V4L2_CID_PRIVATE_LUMAFILTER: - c->value = btv->opt_lumafilter; - break; - case V4L2_CID_PRIVATE_AUTOMUTE: - c->value = btv->opt_automute; - break; - case V4L2_CID_PRIVATE_AGC_CRUSH: - c->value = btv->opt_adc_crush; - break; - case V4L2_CID_PRIVATE_VCR_HACK: - c->value = btv->opt_vcr_hack; - break; - case V4L2_CID_PRIVATE_WHITECRUSH_UPPER: - c->value = btv->opt_whitecrush_upper; - break; - case V4L2_CID_PRIVATE_WHITECRUSH_LOWER: - c->value = btv->opt_whitecrush_lower; - break; - case V4L2_CID_PRIVATE_UV_RATIO: - c->value = btv->opt_uv_ratio; - break; - case V4L2_CID_PRIVATE_FULL_LUMA_RANGE: - c->value = btv->opt_full_luma_range; - break; - case V4L2_CID_PRIVATE_CORING: - c->value = btv->opt_coring; - break; - default: - return -EINVAL; - } - return 0; -} - -static int bttv_s_ctrl(struct file *file, void *f, - struct v4l2_control *c) -{ - int err; - int val; - struct bttv_fh *fh = f; - struct bttv *btv = fh->btv; - - err = v4l2_prio_check(&btv->prio, &fh->prio); - if (0 != err) - return err; - - switch (c->id) { - case V4L2_CID_BRIGHTNESS: - bt848_bright(btv, c->value); - break; - case V4L2_CID_HUE: - bt848_hue(btv, c->value); - break; - case V4L2_CID_CONTRAST: - bt848_contrast(btv, c->value); - break; - case V4L2_CID_SATURATION: - bt848_sat(btv, c->value); - break; - case V4L2_CID_AUDIO_MUTE: - audio_mute(btv, c->value); - /* fall through */ - case V4L2_CID_AUDIO_VOLUME: - if (btv->volume_gpio) - btv->volume_gpio(btv, c->value); - - bttv_call_i2c_clients(btv, VIDIOC_S_CTRL, c); - break; - case V4L2_CID_AUDIO_BALANCE: - case V4L2_CID_AUDIO_BASS: - case V4L2_CID_AUDIO_TREBLE: - bttv_call_i2c_clients(btv, VIDIOC_S_CTRL, c); - break; - - case V4L2_CID_PRIVATE_CHROMA_AGC: - btv->opt_chroma_agc = c->value; - val = btv->opt_chroma_agc ? BT848_SCLOOP_CAGC : 0; - btwrite(val, BT848_E_SCLOOP); - btwrite(val, BT848_O_SCLOOP); - break; - case V4L2_CID_PRIVATE_COMBFILTER: - btv->opt_combfilter = c->value; - break; - case V4L2_CID_PRIVATE_LUMAFILTER: - btv->opt_lumafilter = c->value; - if (btv->opt_lumafilter) { - btand(~BT848_CONTROL_LDEC, BT848_E_CONTROL); - btand(~BT848_CONTROL_LDEC, BT848_O_CONTROL); - } else { - btor(BT848_CONTROL_LDEC, BT848_E_CONTROL); - btor(BT848_CONTROL_LDEC, BT848_O_CONTROL); - } - break; - case V4L2_CID_PRIVATE_AUTOMUTE: - btv->opt_automute = c->value; - break; - case V4L2_CID_PRIVATE_AGC_CRUSH: - btv->opt_adc_crush = c->value; - btwrite(BT848_ADC_RESERVED | - (btv->opt_adc_crush ? BT848_ADC_CRUSH : 0), - BT848_ADC); - break; - case V4L2_CID_PRIVATE_VCR_HACK: - btv->opt_vcr_hack = c->value; - break; - case V4L2_CID_PRIVATE_WHITECRUSH_UPPER: - btv->opt_whitecrush_upper = c->value; - btwrite(c->value, BT848_WC_UP); - break; - case V4L2_CID_PRIVATE_WHITECRUSH_LOWER: - btv->opt_whitecrush_lower = c->value; - btwrite(c->value, BT848_WC_DOWN); - break; - case V4L2_CID_PRIVATE_UV_RATIO: - btv->opt_uv_ratio = c->value; - bt848_sat(btv, btv->saturation); - break; - case V4L2_CID_PRIVATE_FULL_LUMA_RANGE: - btv->opt_full_luma_range = c->value; - btaor((c->value<<7), ~BT848_OFORM_RANGE, BT848_OFORM); - break; - case V4L2_CID_PRIVATE_CORING: - btv->opt_coring = c->value; - btaor((c->value<<5), ~BT848_OFORM_CORE32, BT848_OFORM); - break; - default: - return -EINVAL; - } - return 0; -} - #ifdef CONFIG_VIDEO_ADV_DEBUG static int bttv_g_register(struct file *file, void *f, struct v4l2_register *reg) @@ -2633,13 +2633,26 @@ static int bttv_querycap(struct file *file, void *priv, return 0; } +static int bttv_enum_fmt_vbi(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + if (0 != f->index) + return -EINVAL; + + f->pixelformat = V4L2_PIX_FMT_GREY; + strcpy(f->description, "vbi data"); + + return 0; +} + static int bttv_enum_fmt_cap(struct file *file, void *priv, struct v4l2_fmtdesc *f) { if (f->index >= FORMATS) return -EINVAL; - strlcpy(f->description, formats[f->index].name, sizeof(f->description)); + strlcpy(f->description, formats[f->index].name, + sizeof(f->description)); f->pixelformat = formats[f->index].fourcc; return 0; @@ -2664,18 +2677,6 @@ static int bttv_enum_fmt_overlay(struct file *file, void *priv, return 0; } -static int bttv_enum_fmt_vbi(struct file *file, void *priv, - struct v4l2_fmtdesc *f) -{ - if (0 != f->index) - return -EINVAL; - - f->pixelformat = V4L2_PIX_FMT_GREY; - strcpy(f->description, "vbi data"); - - return 0; -} - static int bttv_g_fbuf(struct file *file, void *f, struct v4l2_framebuffer *fb) { -- cgit v1.2.3-59-g8ed1b From 9134be0376e7527afa4f2574253ff02ca80d5b47 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 27 Dec 2007 22:28:31 -0300 Subject: V4L/DVB (6914): Fix a few issues at the bttv conversion bttv driver is working as previously. An additional gain of about 1,5Kb were obtained with the driver conversion to vidioc_ioctl2: text data bss dec hex filename 89208 40244 57556 187008 2da80 old/bttv.ko 88960 38740 57556 185256 2d3a8 new/bttv.ko (measured on a x86_64) Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bt8xx/bttv-driver.c | 120 ++++++++++++++++++++++---------- 1 file changed, 83 insertions(+), 37 deletions(-) diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index c8f958151677..ddca21d9c948 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -785,15 +785,15 @@ static const struct v4l2_queryctrl bttv_ctls[] = { }; -static const int BTTV_CTLS = ARRAY_SIZE(bttv_ctls); static const struct v4l2_queryctrl *ctrl_by_id(int id) { int i; - for (i = 0; i < BTTV_CTLS; i++) + for (i = 0; i < ARRAY_SIZE(bttv_ctls); i++) if (bttv_ctls[i].id == id) return bttv_ctls+i; + return NULL; } @@ -2479,6 +2479,7 @@ static int bttv_try_fmt_cap(struct file *file, void *priv, struct bttv *btv = fh->btv; enum v4l2_field field; __s32 width, height; + int rc; fmt = format_by_fourcc(f->fmt.pix.pixelformat); if (NULL == fmt) @@ -2515,6 +2516,14 @@ static int bttv_try_fmt_cap(struct file *file, void *priv, width = f->fmt.pix.width; height = f->fmt.pix.height; + rc = limit_scaled_size(fh, &width, &height, field, + /* width_mask: 4 pixels */ ~3, + /* width_bias: nearest */ 2, + /* adjust_size */ 1, + /* adjust_crop */ 0); + if (0 != rc) + return rc; + /* update data for the application */ f->fmt.pix.field = field; pix_format_set_size(&f->fmt.pix, fmt, width, height); @@ -2539,6 +2548,8 @@ static int bttv_s_fmt_cap(struct file *file, void *priv, const struct bttv_format *fmt; struct bttv_fh *fh = priv; struct bttv *btv = fh->btv; + __s32 width, height; + enum v4l2_field field; retval = bttv_switch_type(fh, f->type); if (0 != retval) @@ -2548,6 +2559,20 @@ static int bttv_s_fmt_cap(struct file *file, void *priv, if (0 != retval) return retval; + width = f->fmt.pix.width; + height = f->fmt.pix.height; + field = f->fmt.pix.field; + + retval = limit_scaled_size(fh, &width, &height, f->fmt.pix.field, + /* width_mask: 4 pixels */ ~3, + /* width_bias: nearest */ 2, + /* adjust_size */ 1, + /* adjust_crop */ 1); + if (0 != retval) + return retval; + + f->fmt.pix.field = field; + fmt = format_by_fourcc(f->fmt.pix.pixelformat); /* update our state informations */ @@ -2571,8 +2596,10 @@ static int bttv_s_fmt_overlay(struct file *file, void *priv, struct bttv_fh *fh = priv; struct bttv *btv = fh->btv; - if (no_overlay > 0) + if (no_overlay > 0) { + printk(KERN_ERR "V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); return -EINVAL; + } return setup_window(fh, btv, &f->fmt.win, 1); } @@ -2645,15 +2672,32 @@ static int bttv_enum_fmt_vbi(struct file *file, void *priv, return 0; } +static int bttv_enum_fmt_cap_ovr(struct v4l2_fmtdesc *f) +{ + int index = -1, i; + + for (i = 0; i < FORMATS; i++) { + if (formats[i].fourcc != -1) + index++; + if ((unsigned int)index == f->index) + break; + } + if (FORMATS == i) + return -EINVAL; + + f->pixelformat = formats[i].fourcc; + strlcpy(f->description, formats[i].name, sizeof(f->description)); + + return i; +} + static int bttv_enum_fmt_cap(struct file *file, void *priv, struct v4l2_fmtdesc *f) { - if (f->index >= FORMATS) - return -EINVAL; + int rc = bttv_enum_fmt_cap_ovr(f); - strlcpy(f->description, formats[f->index].name, - sizeof(f->description)); - f->pixelformat = formats[f->index].fourcc; + if (rc < 0) + return rc; return 0; } @@ -2661,18 +2705,20 @@ static int bttv_enum_fmt_cap(struct file *file, void *priv, static int bttv_enum_fmt_overlay(struct file *file, void *priv, struct v4l2_fmtdesc *f) { + int rc; + if (no_overlay > 0) { printk(KERN_ERR "V4L2_BUF_TYPE_VIDEO_OVERLAY: no_overlay\n"); return -EINVAL; } - if (f->index >= FORMATS) - return -EINVAL; + rc = bttv_enum_fmt_cap_ovr(f); - strlcpy(f->description, formats[f->index].name, - sizeof(f->description)); + if (rc < 0) + return rc; - f->pixelformat = formats[f->index].fourcc; + if (!(formats[rc].flags & FORMAT_FLAGS_PACKED)) + return -EINVAL; return 0; } @@ -2871,12 +2917,13 @@ static int bttv_queryctrl(struct file *file, void *priv, c->id >= V4L2_CID_PRIVATE_LASTP1)) return -EINVAL; - ctrl = ctrl_by_id(c->id); - *c = (NULL != ctrl) ? *ctrl : no_ctl; + if (!btv->volume_gpio && (c->id == V4L2_CID_AUDIO_VOLUME)) + *c = no_ctl; + else { + ctrl = ctrl_by_id(c->id); - if (!btv->volume_gpio && - (ctrl->id == V4L2_CID_AUDIO_VOLUME)) - * c = no_ctl; + *c = (NULL != ctrl) ? *ctrl : no_ctl; + } return 0; } @@ -3306,9 +3353,6 @@ static const struct file_operations bttv_fops = static struct video_device bttv_video_template = { - .name = "UNSET", - .type = VID_TYPE_CAPTURE|VID_TYPE_TUNER| - VID_TYPE_CLIPPING|VID_TYPE_SCALES, .fops = &bttv_fops, .minor = -1, .vidioc_querycap = bttv_querycap, @@ -3364,14 +3408,6 @@ static struct video_device bttv_video_template = .current_norm = V4L2_STD_PAL, }; -static struct video_device bttv_vbi_template = -{ - .name = "bt848/878 vbi", - .type = VID_TYPE_TUNER|VID_TYPE_TELETEXT, - .fops = &bttv_fops, - .minor = -1, -}; - /* ----------------------------------------------------------------------- */ /* radio interface */ @@ -3570,8 +3606,6 @@ static const struct file_operations radio_fops = static struct video_device radio_template = { - .name = "bt848/878 radio", - .type = VID_TYPE_TUNER, .fops = &radio_fops, .minor = -1, .vidioc_querycap = radio_querycap, @@ -4109,8 +4143,9 @@ static irqreturn_t bttv_irq(int irq, void *dev_id) /* initialitation */ static struct video_device *vdev_init(struct bttv *btv, - struct video_device *template, - char *type) + const struct video_device *template, + const char *type_name, + const int type) { struct video_device *vfd; @@ -4121,9 +4156,10 @@ static struct video_device *vdev_init(struct bttv *btv, vfd->minor = -1; vfd->dev = &btv->c.pci->dev; vfd->release = video_device_release; + vfd->type = type; snprintf(vfd->name, sizeof(vfd->name), "BT%d%s %s (%s)", btv->id, (btv->id==848 && btv->revision==0x12) ? "A" : "", - type, bttv_tvcards[btv->c.type].name); + type_name, bttv_tvcards[btv->c.type].name); return vfd; } @@ -4155,6 +4191,11 @@ static void bttv_unregister_video(struct bttv *btv) /* register video4linux devices */ static int __devinit bttv_register_video(struct bttv *btv) { + int video_type = VID_TYPE_CAPTURE | + VID_TYPE_TUNER | + VID_TYPE_CLIPPING| + VID_TYPE_SCALES; + if (no_overlay <= 0) { bttv_video_template.type |= VID_TYPE_OVERLAY; } else { @@ -4162,7 +4203,9 @@ static int __devinit bttv_register_video(struct bttv *btv) } /* video */ - btv->video_dev = vdev_init(btv, &bttv_video_template, "video"); + btv->video_dev = vdev_init(btv, &bttv_video_template, + "video", video_type); + if (NULL == btv->video_dev) goto err; if (video_register_device(btv->video_dev,VFL_TYPE_GRABBER,video_nr)<0) @@ -4177,7 +4220,9 @@ static int __devinit bttv_register_video(struct bttv *btv) } /* vbi */ - btv->vbi_dev = vdev_init(btv, &bttv_vbi_template, "vbi"); + btv->vbi_dev = vdev_init(btv, &bttv_video_template, + "vbi", VID_TYPE_TUNER | VID_TYPE_TELETEXT); + if (NULL == btv->vbi_dev) goto err; if (video_register_device(btv->vbi_dev,VFL_TYPE_VBI,vbi_nr)<0) @@ -4188,7 +4233,8 @@ static int __devinit bttv_register_video(struct bttv *btv) if (!btv->has_radio) return 0; /* radio */ - btv->radio_dev = vdev_init(btv, &radio_template, "radio"); + btv->radio_dev = vdev_init(btv, &radio_template, + "radio", VID_TYPE_TUNER); if (NULL == btv->radio_dev) goto err; if (video_register_device(btv->radio_dev, VFL_TYPE_RADIO,radio_nr)<0) -- cgit v1.2.3-59-g8ed1b From d998cc6a6d8e7da19ecadded55e373a84b1b4463 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 22 Dec 2007 18:28:22 -0300 Subject: V4L/DVB (6915): ivtv: drop an incorrect comment Signed-off-by: Jean Delvare Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c index efd4a1324dc5..fa5ab1eb1800 100644 --- a/drivers/media/video/ivtv/ivtv-i2c.c +++ b/drivers/media/video/ivtv/ivtv-i2c.c @@ -580,7 +580,7 @@ static int ivtv_getsda_old(void *data) /* template for i2c-bit-algo */ static struct i2c_adapter ivtv_i2c_adap_template = { .name = "ivtv i2c driver", - .id = I2C_HW_B_CX2341X, /* algo-bit is OR'd with this */ + .id = I2C_HW_B_CX2341X, .algo = NULL, /* set by i2c-algo-bit */ .algo_data = NULL, /* filled from template */ .client_register = attach_inform, -- cgit v1.2.3-59-g8ed1b From 3e509c76047781525c38fde1e0fa244470c7663c Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 24 Dec 2007 10:41:47 -0300 Subject: V4L/DVB (6917): ivtv: small textual update Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index 0cb832a21357..d42f120354e5 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -640,7 +640,7 @@ done: IVTV_ERR("Defaulting to %s card\n", itv->card->name); IVTV_ERR("Please mail the vendor/device and subsystem vendor/device IDs and what kind of\n"); IVTV_ERR("card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)\n"); - IVTV_ERR("Prefix your subject line with [UNKNOWN CARD].\n"); + IVTV_ERR("Prefix your subject line with [UNKNOWN IVTV CARD].\n"); } itv->v4l2_cap = itv->card->v4l2_capabilities; itv->card_name = itv->card->name; -- cgit v1.2.3-59-g8ed1b From de7234bb05a8498c5092385d3f1dd9e73cd332d0 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 26 Dec 2007 13:04:08 -0300 Subject: V4L/DVB (6919): Kconfig: VIDEO_CX23885 must select DVB_TUNER_XC5000 if !DVB_FE_CUSTOMIZE Everybody forgets to add the Kconfig stuff after they add new card support :-/ Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig index 3393dd6153e9..1fd326fe4113 100644 --- a/drivers/media/video/cx23885/Kconfig +++ b/drivers/media/video/cx23885/Kconfig @@ -15,6 +15,7 @@ config VIDEO_CX23885 select TUNER_XC2028 if !DVB_FE_CUSTOMIZE select TUNER_TDA8290 if !DVB_FE_CUSTOMIZE select DVB_TDA18271 if !DVB_FE_CUSTOMIZE + select DVB_TUNER_XC5000 if !DVB_FE_CUSTOMIZE ---help--- This is a video4linux driver for Conexant 23885 based TV cards. -- cgit v1.2.3-59-g8ed1b From 67d52e29032dd2f21d4080331f47a21205f337f6 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 24 Dec 2007 16:05:39 -0300 Subject: V4L/DVB (6920): tuner: fix backwards logic in check for set_config tuner-core was checking if analog_ops->set_config is set. If set, it would complain that it isn't. Fix this backwards logic to the proper behavior. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-core.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index f792871582ff..67b9ed1ac71a 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -855,12 +855,11 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) break; if (analog_ops->set_config) { - tuner_warn("Tuner frontend module has no way to " - "set config\n"); + analog_ops->set_config(&t->fe, cfg->priv); break; } - analog_ops->set_config(&t->fe, cfg->priv); + tuner_dbg("Tuner frontend module has no way to set config\n"); break; } /* --- v4l ioctls --- */ -- cgit v1.2.3-59-g8ed1b From 8574ac690eab730a3ff735177af1d52e45e36c8b Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 24 Dec 2007 15:49:33 -0300 Subject: V4L/DVB (6921): include/media/v4l2-i2c-drv.h must #include Fix the following compiler error: v4l2-i2c-drv.h:72: error: implicit declaration of function 'v4l2_i2c_attach' Also, prevent multiple inclusions of v4l2-i2c-drv.h Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- include/media/v4l2-i2c-drv.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/include/media/v4l2-i2c-drv.h b/include/media/v4l2-i2c-drv.h index d758b765e0ff..9e4bab276915 100644 --- a/include/media/v4l2-i2c-drv.h +++ b/include/media/v4l2-i2c-drv.h @@ -21,6 +21,11 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#ifndef __V4L2_I2C_DRV_H__ +#define __V4L2_I2C_DRV_H__ + +#include + struct v4l2_i2c_driver_data { const char * const name; int driverid; @@ -59,3 +64,5 @@ static void __exit v4l2_i2c_drv_cleanup(void) module_init(v4l2_i2c_drv_init); module_exit(v4l2_i2c_drv_cleanup); + +#endif /* __V4L2_I2C_DRV_H__ */ -- cgit v1.2.3-59-g8ed1b From 926bf3ca937461123b98ff2ba8c3409f5b4c05b5 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 24 Dec 2007 14:14:03 -0300 Subject: V4L/DVB (6923): tda18271: remove extraneous debug We don't need to do a dbg_info during tda18271_attach anymore, since the tda18271_get_id function will call dbg_info with the same information and more. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index 19c9be92de51..da22b24190cf 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -783,7 +783,6 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, { struct tda18271_priv *priv = NULL; - dbg_info("@ %d-%04x\n", i2c_adapter_id(i2c), addr); priv = kzalloc(sizeof(struct tda18271_priv), GFP_KERNEL); if (priv == NULL) return NULL; -- cgit v1.2.3-59-g8ed1b From 7686b574a1507ecf5fd7c419b43f26222668aa4d Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 24 Dec 2007 21:03:52 -0300 Subject: V4L/DVB (6924): tda18271: fix whitespace in tda18271_ir_measure Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-tables.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271-tables.c b/drivers/media/dvb/frontends/tda18271-tables.c index cce0e0d82233..02b6d2cb9570 100644 --- a/drivers/media/dvb/frontends/tda18271-tables.c +++ b/drivers/media/dvb/frontends/tda18271-tables.c @@ -258,11 +258,11 @@ static struct tda18271_map tda18271_rf_cal[] = { }; static struct tda18271_map tda18271_ir_measure[] = { - { .rfmax = 30000, .val = 4}, - { .rfmax = 200000, .val = 5}, - { .rfmax = 600000, .val = 6}, - { .rfmax = 865000, .val = 7}, - { .rfmax = 0, .val = 0}, /* end */ + { .rfmax = 30000, .val = 4 }, + { .rfmax = 200000, .val = 5 }, + { .rfmax = 600000, .val = 6 }, + { .rfmax = 865000, .val = 7 }, + { .rfmax = 0, .val = 0 }, /* end */ }; /*---------------------------------------------------------------------*/ -- cgit v1.2.3-59-g8ed1b From d37142102a2adaa3391a384ea6a780afb5804789 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 24 Dec 2007 14:38:41 -0300 Subject: V4L/DVB (6925): tda18271: move state structures to tda18271-priv.h Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 19 ------------------- drivers/media/dvb/frontends/tda18271-priv.h | 22 ++++++++++++++++++++++ 2 files changed, 22 insertions(+), 19 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index da22b24190cf..4526def2d42f 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -20,8 +20,6 @@ #include #include - -#include "tda18271.h" #include "tda18271-priv.h" int tda18271_debug; @@ -30,23 +28,6 @@ MODULE_PARM_DESC(debug, "set debug level (info=1, map=2, reg=4 (or-able))"); /*---------------------------------------------------------------------*/ -enum tda18271_mode { - TDA18271_ANALOG, - TDA18271_DIGITAL, -}; - -struct tda18271_priv { - u8 i2c_addr; - struct i2c_adapter *i2c_adap; - unsigned char tda18271_regs[TDA18271_NUM_REGS]; - - enum tda18271_mode mode; - enum tda18271_i2c_gate gate; - - u32 frequency; - u32 bandwidth; -}; - static int tda18271_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) { struct tda18271_priv *priv = fe->tuner_priv; diff --git a/drivers/media/dvb/frontends/tda18271-priv.h b/drivers/media/dvb/frontends/tda18271-priv.h index e1fa9a467939..7b9aa9ad53fe 100644 --- a/drivers/media/dvb/frontends/tda18271-priv.h +++ b/drivers/media/dvb/frontends/tda18271-priv.h @@ -23,6 +23,7 @@ #include #include +#include "tda18271.h" #define R_ID 0x00 /* ID byte */ #define R_TM 0x01 /* Thermo byte */ @@ -66,6 +67,27 @@ #define TDA18271_NUM_REGS 39 +/*---------------------------------------------------------------------*/ + +enum tda18271_mode { + TDA18271_ANALOG, + TDA18271_DIGITAL, +}; + +struct tda18271_priv { + u8 i2c_addr; + struct i2c_adapter *i2c_adap; + unsigned char tda18271_regs[TDA18271_NUM_REGS]; + + enum tda18271_mode mode; + enum tda18271_i2c_gate gate; + + u32 frequency; + u32 bandwidth; +}; + +/*---------------------------------------------------------------------*/ + extern int tda18271_debug; #define dprintk(level, fmt, arg...) do {\ -- cgit v1.2.3-59-g8ed1b From 2f27dfc98cc0a183be9e3c2fc0da0450b85e5fde Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Tue, 25 Dec 2007 00:39:37 -0300 Subject: V4L/DVB (6926): tda18271: consolidate table lookup functions Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 28 +++--- drivers/media/dvb/frontends/tda18271-priv.h | 26 ++++-- drivers/media/dvb/frontends/tda18271-tables.c | 126 +++++++++++++++----------- 3 files changed, 106 insertions(+), 74 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index 4526def2d42f..72e256ebeb0f 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -360,7 +360,9 @@ static int tda18271_calc_main_pll(struct dvb_frontend *fe, u32 freq) u8 d, pd; u32 div; - tda18271_lookup_main_pll(&freq, &pd, &d); + int ret = tda18271_lookup_pll_map(MAIN_PLL, &freq, &pd, &d); + if (ret < 0) + goto fail; regs[R_MPD] = (0x77 & pd); @@ -378,8 +380,8 @@ static int tda18271_calc_main_pll(struct dvb_frontend *fe, u32 freq) regs[R_MD1] = 0x7f & (div >> 16); regs[R_MD2] = 0xff & (div >> 8); regs[R_MD3] = 0xff & div; - - return 0; +fail: + return ret; } static int tda18271_calc_cal_pll(struct dvb_frontend *fe, u32 freq) @@ -390,7 +392,9 @@ static int tda18271_calc_cal_pll(struct dvb_frontend *fe, u32 freq) u8 d, pd; u32 div; - tda18271_lookup_cal_pll(&freq, &pd, &d); + int ret = tda18271_lookup_pll_map(CAL_PLL, &freq, &pd, &d); + if (ret < 0) + goto fail; regs[R_CPD] = pd; @@ -399,8 +403,8 @@ static int tda18271_calc_cal_pll(struct dvb_frontend *fe, u32 freq) regs[R_CD1] = 0x7f & (div >> 16); regs[R_CD2] = 0xff & (div >> 8); regs[R_CD3] = 0xff & div; - - return 0; +fail: + return ret; } static int tda18271_tune(struct dvb_frontend *fe, @@ -418,7 +422,7 @@ static int tda18271_tune(struct dvb_frontend *fe, /* RF tracking filter calibration */ /* calculate BP_Filter */ - tda18271_lookup_bp_filter(&freq, &val); + tda18271_lookup_map(BP_FILTER, &freq, &val); regs[R_EP1] &= ~0x07; /* clear bp filter bits */ regs[R_EP1] |= val; @@ -470,20 +474,20 @@ static int tda18271_tune(struct dvb_frontend *fe, msleep(5); /* RF tracking filter calibration initialization */ /* search for K,M,CO for RF Calibration */ - tda18271_lookup_km(&freq, &val); + tda18271_lookup_map(RF_CAL_KMCO, &freq, &val); regs[R_EB13] &= 0x83; regs[R_EB13] |= val; tda18271_write_regs(fe, R_EB13, 1); /* search for RF_BAND */ - tda18271_lookup_rf_band(&freq, &val); + tda18271_lookup_map(RF_BAND, &freq, &val); regs[R_EP2] &= ~0xe0; /* clear rf band bits */ regs[R_EP2] |= (val << 5); /* search for Gain_Taper */ - tda18271_lookup_gain_taper(&freq, &val); + tda18271_lookup_map(GAIN_TAPER, &freq, &val); regs[R_EP2] &= ~0x1f; /* clear gain taper bits */ regs[R_EP2] |= val; @@ -511,7 +515,7 @@ static int tda18271_tune(struct dvb_frontend *fe, tda18271_write_regs(fe, R_EP1, 1); /* RF tracking filer correction for VHF_Low band */ - tda18271_lookup_rf_cal(&freq, &val); + tda18271_lookup_map(RF_CAL, &freq, &val); /* VHF_Low band only */ if (val != 0) { @@ -555,7 +559,7 @@ static int tda18271_tune(struct dvb_frontend *fe, regs[R_EP4] &= ~0x80; /* turn this bit on only for fm */ /* image rejection validity EP5[2:0] */ - tda18271_lookup_ir_measure(&freq, &val); + tda18271_lookup_map(IR_MEASURE, &freq, &val); regs[R_EP5] &= ~0x07; regs[R_EP5] |= val; diff --git a/drivers/media/dvb/frontends/tda18271-priv.h b/drivers/media/dvb/frontends/tda18271-priv.h index 7b9aa9ad53fe..b08bf08aa88f 100644 --- a/drivers/media/dvb/frontends/tda18271-priv.h +++ b/drivers/media/dvb/frontends/tda18271-priv.h @@ -104,15 +104,23 @@ extern int tda18271_debug; /*---------------------------------------------------------------------*/ -extern void tda18271_lookup_cal_pll(u32 *freq, u8 *post_div, u8 *div); -extern void tda18271_lookup_main_pll(u32 *freq, u8 *post_div, u8 *div); - -extern void tda18271_lookup_bp_filter(u32 *freq, u8 *val); -extern void tda18271_lookup_km(u32 *freq, u8 *val); -extern void tda18271_lookup_rf_band(u32 *freq, u8 *val); -extern void tda18271_lookup_gain_taper(u32 *freq, u8 *val); -extern void tda18271_lookup_rf_cal(u32 *freq, u8 *val); -extern void tda18271_lookup_ir_measure(u32 *freq, u8 *val); +enum tda18271_map_type { + /* tda18271_pll_map */ + MAIN_PLL, + CAL_PLL, + /* tda18271_map */ + RF_CAL, + RF_CAL_KMCO, + BP_FILTER, + RF_BAND, + GAIN_TAPER, + IR_MEASURE, +}; + +extern int tda18271_lookup_pll_map(enum tda18271_map_type map_type, + u32 *freq, u8 *post_div, u8 *div); +extern int tda18271_lookup_map(enum tda18271_map_type map_type, + u32 *freq, u8 *val); #endif /* __TDA18271_PRIV_H__ */ diff --git a/drivers/media/dvb/frontends/tda18271-tables.c b/drivers/media/dvb/frontends/tda18271-tables.c index 02b6d2cb9570..8990bef0cf7e 100644 --- a/drivers/media/dvb/frontends/tda18271-tables.c +++ b/drivers/media/dvb/frontends/tda18271-tables.c @@ -267,22 +267,33 @@ static struct tda18271_map tda18271_ir_measure[] = { /*---------------------------------------------------------------------*/ -static void tda18271_lookup_map(struct tda18271_map *map, - u32 *freq, u8 *val) +int tda18271_lookup_pll_map(enum tda18271_map_type map_type, + u32 *freq, u8 *post_div, u8 *div) { - int i = 0; - while ((map[i].rfmax * 1000) < *freq) { - if (map[i + 1].rfmax == 0) - break; - i++; + struct tda18271_pll_map *map = NULL; + unsigned int i = 0; + char *map_name; + + switch (map_type) { + case MAIN_PLL: + map = tda18271_main_pll; + map_name = "main_pll"; + break; + case CAL_PLL: + map = tda18271_cal_pll; + map_name = "cal_pll"; + break; + default: + /* we should never get here */ + map_name = "undefined"; + break; + } + + if (!map) { + dbg_info("%s map is not set!\n", map_name); + return -EINVAL; } - *val = map[i].val; -} -static void tda18271_lookup_pll_map(struct tda18271_pll_map *map, - u32 *freq, u8 *post_div, u8 *div) -{ - int i = 0; while ((map[i].lomax * 1000) < *freq) { if (map[i + 1].lomax == 0) break; @@ -290,56 +301,65 @@ static void tda18271_lookup_pll_map(struct tda18271_pll_map *map, } *post_div = map[i].pd; *div = map[i].d; -} - -/*---------------------------------------------------------------------*/ -void tda18271_lookup_cal_pll(u32 *freq, u8 *post_div, u8 *div) -{ - tda18271_lookup_pll_map(tda18271_cal_pll, freq, post_div, div); - dbg_map("post div = 0x%02x, div = 0x%02x\n", *post_div, *div); -} + dbg_map("%s: post div = 0x%02x, div = 0x%02x\n", + map_name, *post_div, *div); -void tda18271_lookup_main_pll(u32 *freq, u8 *post_div, u8 *div) -{ - tda18271_lookup_pll_map(tda18271_main_pll, freq, post_div, div); - dbg_map("post div = 0x%02x, div = 0x%02x\n", *post_div, *div); + return 0; } -void tda18271_lookup_bp_filter(u32 *freq, u8 *val) +int tda18271_lookup_map(enum tda18271_map_type map_type, u32 *freq, u8 *val) { - tda18271_lookup_map(tda18271_bp_filter, freq, val); - dbg_map("0x%02x\n", *val); -} + struct tda18271_map *map = NULL; + unsigned int i = 0; + char *map_name; -void tda18271_lookup_km(u32 *freq, u8 *val) -{ - tda18271_lookup_map(tda18271_km, freq, val); - dbg_map("0x%02x\n", *val); -} + switch (map_type) { + case BP_FILTER: + map = tda18271_bp_filter; + map_name = "bp_filter"; + break; + case RF_CAL_KMCO: + map = tda18271_km; + map_name = "km"; + break; + case RF_BAND: + map = tda18271_rf_band; + map_name = "rf_band"; + break; + case GAIN_TAPER: + map = tda18271_gain_taper; + map_name = "gain_taper"; + break; + case RF_CAL: + map = tda18271_rf_cal; + map_name = "rf_cal"; + break; + case IR_MEASURE: + map = tda18271_ir_measure; + map_name = "ir_measure"; + break; + default: + /* we should never get here */ + map_name = "undefined"; + break; + } -void tda18271_lookup_rf_band(u32 *freq, u8 *val) -{ - tda18271_lookup_map(tda18271_rf_band, freq, val); - dbg_map("0x%02x\n", *val); -} + if (!map) { + dbg_info("%s map is not set!\n", map_name); + return -EINVAL; + } -void tda18271_lookup_gain_taper(u32 *freq, u8 *val) -{ - tda18271_lookup_map(tda18271_gain_taper, freq, val); - dbg_map("0x%02x\n", *val); -} + while ((map[i].rfmax * 1000) < *freq) { + if (map[i + 1].rfmax == 0) + break; + i++; + } + *val = map[i].val; -void tda18271_lookup_rf_cal(u32 *freq, u8 *val) -{ - tda18271_lookup_map(tda18271_rf_cal, freq, val); - dbg_map("0x%02x\n", *val); -} + dbg_map("%s: 0x%02x\n", map_name, *val); -void tda18271_lookup_ir_measure(u32 *freq, u8 *val) -{ - tda18271_lookup_map(tda18271_ir_measure, freq, val); - dbg_map("0x%02x\n", *val); + return 0; } /* -- cgit v1.2.3-59-g8ed1b From 182519f4c99f73f376323580dda494d986b4760b Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Tue, 25 Dec 2007 15:10:11 -0300 Subject: V4L/DVB (6927): tda18271: improve printk macros Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 58 +++++++++++++-------------- drivers/media/dvb/frontends/tda18271-priv.h | 20 +++++---- drivers/media/dvb/frontends/tda18271-tables.c | 8 ++-- 3 files changed, 44 insertions(+), 42 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index 72e256ebeb0f..8146c4e7ee7b 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -76,23 +76,23 @@ static void tda18271_dump_regs(struct dvb_frontend *fe) struct tda18271_priv *priv = fe->tuner_priv; unsigned char *regs = priv->tda18271_regs; - dbg_reg("=== TDA18271 REG DUMP ===\n"); - dbg_reg("ID_BYTE = 0x%02x\n", 0xff & regs[R_ID]); - dbg_reg("THERMO_BYTE = 0x%02x\n", 0xff & regs[R_TM]); - dbg_reg("POWER_LEVEL_BYTE = 0x%02x\n", 0xff & regs[R_PL]); - dbg_reg("EASY_PROG_BYTE_1 = 0x%02x\n", 0xff & regs[R_EP1]); - dbg_reg("EASY_PROG_BYTE_2 = 0x%02x\n", 0xff & regs[R_EP2]); - dbg_reg("EASY_PROG_BYTE_3 = 0x%02x\n", 0xff & regs[R_EP3]); - dbg_reg("EASY_PROG_BYTE_4 = 0x%02x\n", 0xff & regs[R_EP4]); - dbg_reg("EASY_PROG_BYTE_5 = 0x%02x\n", 0xff & regs[R_EP5]); - dbg_reg("CAL_POST_DIV_BYTE = 0x%02x\n", 0xff & regs[R_CPD]); - dbg_reg("CAL_DIV_BYTE_1 = 0x%02x\n", 0xff & regs[R_CD1]); - dbg_reg("CAL_DIV_BYTE_2 = 0x%02x\n", 0xff & regs[R_CD2]); - dbg_reg("CAL_DIV_BYTE_3 = 0x%02x\n", 0xff & regs[R_CD3]); - dbg_reg("MAIN_POST_DIV_BYTE = 0x%02x\n", 0xff & regs[R_MPD]); - dbg_reg("MAIN_DIV_BYTE_1 = 0x%02x\n", 0xff & regs[R_MD1]); - dbg_reg("MAIN_DIV_BYTE_2 = 0x%02x\n", 0xff & regs[R_MD2]); - dbg_reg("MAIN_DIV_BYTE_3 = 0x%02x\n", 0xff & regs[R_MD3]); + tda_reg("=== TDA18271 REG DUMP ===\n"); + tda_reg("ID_BYTE = 0x%02x\n", 0xff & regs[R_ID]); + tda_reg("THERMO_BYTE = 0x%02x\n", 0xff & regs[R_TM]); + tda_reg("POWER_LEVEL_BYTE = 0x%02x\n", 0xff & regs[R_PL]); + tda_reg("EASY_PROG_BYTE_1 = 0x%02x\n", 0xff & regs[R_EP1]); + tda_reg("EASY_PROG_BYTE_2 = 0x%02x\n", 0xff & regs[R_EP2]); + tda_reg("EASY_PROG_BYTE_3 = 0x%02x\n", 0xff & regs[R_EP3]); + tda_reg("EASY_PROG_BYTE_4 = 0x%02x\n", 0xff & regs[R_EP4]); + tda_reg("EASY_PROG_BYTE_5 = 0x%02x\n", 0xff & regs[R_EP5]); + tda_reg("CAL_POST_DIV_BYTE = 0x%02x\n", 0xff & regs[R_CPD]); + tda_reg("CAL_DIV_BYTE_1 = 0x%02x\n", 0xff & regs[R_CD1]); + tda_reg("CAL_DIV_BYTE_2 = 0x%02x\n", 0xff & regs[R_CD2]); + tda_reg("CAL_DIV_BYTE_3 = 0x%02x\n", 0xff & regs[R_CD3]); + tda_reg("MAIN_POST_DIV_BYTE = 0x%02x\n", 0xff & regs[R_MPD]); + tda_reg("MAIN_DIV_BYTE_1 = 0x%02x\n", 0xff & regs[R_MD1]); + tda_reg("MAIN_DIV_BYTE_2 = 0x%02x\n", 0xff & regs[R_MD2]); + tda_reg("MAIN_DIV_BYTE_3 = 0x%02x\n", 0xff & regs[R_MD3]); } static void tda18271_read_regs(struct dvb_frontend *fe) @@ -116,8 +116,7 @@ static void tda18271_read_regs(struct dvb_frontend *fe) tda18271_i2c_gate_ctrl(fe, 0); if (ret != 2) - printk("ERROR: %s: i2c_transfer returned: %d\n", - __FUNCTION__, ret); + tda_err("ERROR: i2c_transfer returned: %d\n", ret); if (tda18271_debug & DBG_REG) tda18271_dump_regs(fe); @@ -147,8 +146,7 @@ static void tda18271_write_regs(struct dvb_frontend *fe, int idx, int len) tda18271_i2c_gate_ctrl(fe, 0); if (ret != 1) - printk(KERN_WARNING "ERROR: %s: i2c_transfer returned: %d\n", - __FUNCTION__, ret); + tda_err("ERROR: i2c_transfer returned: %d\n", ret); } /*---------------------------------------------------------------------*/ @@ -158,7 +156,8 @@ static int tda18271_init_regs(struct dvb_frontend *fe) struct tda18271_priv *priv = fe->tuner_priv; unsigned char *regs = priv->tda18271_regs; - printk(KERN_INFO "tda18271: initializing registers\n"); + tda_dbg("initializing registers for device @ %d-%04x\n", + i2c_adapter_id(priv->i2c_adap), priv->i2c_addr); /* initialize registers */ regs[R_ID] = 0x83; @@ -417,7 +416,7 @@ static int tda18271_tune(struct dvb_frontend *fe, tda18271_init(fe); - dbg_info("freq = %d, ifc = %d\n", freq, ifc); + tda_dbg("freq = %d, ifc = %d\n", freq, ifc); /* RF tracking filter calibration */ @@ -602,8 +601,7 @@ static int tda18271_set_params(struct dvb_frontend *fe, sgIF = 4000000; break; default: - printk(KERN_WARNING "%s: modulation not set!\n", - __FUNCTION__); + tda_warn("modulation not set!\n"); return -EINVAL; } #if 0 @@ -629,13 +627,11 @@ static int tda18271_set_params(struct dvb_frontend *fe, sgIF = 4300000; break; default: - printk(KERN_WARNING "%s: bandwidth not set!\n", - __FUNCTION__); + tda_warn("bandwidth not set!\n"); return -EINVAL; } } else { - printk(KERN_WARNING "%s: modulation type not supported!\n", - __FUNCTION__); + tda_warn("modulation type not supported!\n"); return -EINVAL; } @@ -690,7 +686,7 @@ static int tda18271_set_analog_params(struct dvb_frontend *fe, if (params->mode == V4L2_TUNER_RADIO) sgIF = 88; /* if frequency is 5.5 MHz */ - dbg_info("setting tda18271 to system %s\n", mode); + tda_dbg("setting tda18271 to system %s\n", mode); return tda18271_tune(fe, sgIF * 62500, params->frequency * 62500, 0, std); @@ -740,7 +736,7 @@ static int tda18271_get_id(struct dvb_frontend *fe) break; } - dbg_info("%s detected @ %d-%04x%s\n", name, + tda_info("%s detected @ %d-%04x%s\n", name, i2c_adapter_id(priv->i2c_adap), priv->i2c_addr, (0 == ret) ? "" : ", device not supported."); diff --git a/drivers/media/dvb/frontends/tda18271-priv.h b/drivers/media/dvb/frontends/tda18271-priv.h index b08bf08aa88f..912b81e0c765 100644 --- a/drivers/media/dvb/frontends/tda18271-priv.h +++ b/drivers/media/dvb/frontends/tda18271-priv.h @@ -90,17 +90,23 @@ struct tda18271_priv { extern int tda18271_debug; -#define dprintk(level, fmt, arg...) do {\ - if (tda18271_debug & level) \ - printk(KERN_DEBUG "%s: " fmt, __FUNCTION__, ##arg); } while (0) - #define DBG_INFO 1 #define DBG_MAP 2 #define DBG_REG 4 -#define dbg_info(fmt, arg...) dprintk(DBG_INFO, fmt, ##arg) -#define dbg_map(fmt, arg...) dprintk(DBG_MAP, fmt, ##arg) -#define dbg_reg(fmt, arg...) dprintk(DBG_REG, fmt, ##arg) +#define tda_printk(kern, fmt, arg...) \ + printk(kern "%s: " fmt, __FUNCTION__, ##arg) + +#define dprintk(kern, lvl, fmt, arg...) do {\ + if (tda18271_debug & lvl) \ + tda_printk(kern, fmt, ##arg); } while (0) + +#define tda_info(fmt, arg...) printk(KERN_INFO fmt, ##arg) +#define tda_warn(fmt, arg...) tda_printk(KERN_WARNING, fmt, ##arg) +#define tda_err(fmt, arg...) tda_printk(KERN_ERR, fmt, ##arg) +#define tda_dbg(fmt, arg...) dprintk(KERN_DEBUG, DBG_INFO, fmt, ##arg) +#define tda_map(fmt, arg...) dprintk(KERN_DEBUG, DBG_MAP, fmt, ##arg) +#define tda_reg(fmt, arg...) dprintk(KERN_DEBUG, DBG_REG, fmt, ##arg) /*---------------------------------------------------------------------*/ diff --git a/drivers/media/dvb/frontends/tda18271-tables.c b/drivers/media/dvb/frontends/tda18271-tables.c index 8990bef0cf7e..e10a93bf12c1 100644 --- a/drivers/media/dvb/frontends/tda18271-tables.c +++ b/drivers/media/dvb/frontends/tda18271-tables.c @@ -290,7 +290,7 @@ int tda18271_lookup_pll_map(enum tda18271_map_type map_type, } if (!map) { - dbg_info("%s map is not set!\n", map_name); + tda_warn("%s map is not set!\n", map_name); return -EINVAL; } @@ -302,7 +302,7 @@ int tda18271_lookup_pll_map(enum tda18271_map_type map_type, *post_div = map[i].pd; *div = map[i].d; - dbg_map("%s: post div = 0x%02x, div = 0x%02x\n", + tda_map("%s: post div = 0x%02x, div = 0x%02x\n", map_name, *post_div, *div); return 0; @@ -346,7 +346,7 @@ int tda18271_lookup_map(enum tda18271_map_type map_type, u32 *freq, u8 *val) } if (!map) { - dbg_info("%s map is not set!\n", map_name); + tda_warn("%s map is not set!\n", map_name); return -EINVAL; } @@ -357,7 +357,7 @@ int tda18271_lookup_map(enum tda18271_map_type map_type, u32 *freq, u8 *val) } *val = map[i].val; - dbg_map("%s: 0x%02x\n", map_name, *val); + tda_map("%s: 0x%02x\n", map_name, *val); return 0; } -- cgit v1.2.3-59-g8ed1b From b92bf0f6a94b73a1b8bd0023b1fa642d13b01a76 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Tue, 25 Dec 2007 18:54:22 -0300 Subject: V4L/DVB (6928): tda18271: break calculation functions out of tda18271_tune Break out the following new functions from tda18271_tune: tda18271_calc_bp_filter tda18271_calc_km tda18271_calc_rf_band tda18271_calc_gain_taper tda18271_calc_ir_measure tda18271_calc_rf_cal Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 143 ++++++++++++++++++++++++------ 1 file changed, 114 insertions(+), 29 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index 8146c4e7ee7b..d5807c98afc1 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -406,13 +406,118 @@ fail: return ret; } +static int tda18271_calc_bp_filter(struct dvb_frontend *fe, u32 *freq) +{ + /* Sets BP filter bits, but does not write them */ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + u8 val; + + int ret = tda18271_lookup_map(BP_FILTER, freq, &val); + if (ret < 0) + goto fail; + + regs[R_EP1] &= ~0x07; /* clear bp filter bits */ + regs[R_EP1] |= (0x07 & val); +fail: + return ret; +} + +static int tda18271_calc_km(struct dvb_frontend *fe, u32 *freq) +{ + /* Sets K & M bits, but does not write them */ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + u8 val; + + int ret = tda18271_lookup_map(RF_CAL_KMCO, freq, &val); + if (ret < 0) + goto fail; + + regs[R_EB13] &= ~0x7c; /* clear k & m bits */ + regs[R_EB13] |= (0x7c & val); +fail: + return ret; +} + +static int tda18271_calc_rf_band(struct dvb_frontend *fe, u32 *freq) +{ + /* Sets RF Band bits, but does not write them */ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + u8 val; + + int ret = tda18271_lookup_map(RF_BAND, freq, &val); + if (ret < 0) + goto fail; + + regs[R_EP2] &= ~0xe0; /* clear rf band bits */ + regs[R_EP2] |= (0xe0 & (val << 5)); +fail: + return ret; +} + +static int tda18271_calc_gain_taper(struct dvb_frontend *fe, u32 *freq) +{ + /* Sets Gain Taper bits, but does not write them */ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + u8 val; + + int ret = tda18271_lookup_map(GAIN_TAPER, freq, &val); + if (ret < 0) + goto fail; + + regs[R_EP2] &= ~0x1f; /* clear gain taper bits */ + regs[R_EP2] |= (0x1f & val); +fail: + return ret; +} + +static int tda18271_calc_ir_measure(struct dvb_frontend *fe, u32 *freq) +{ + /* Sets IR Meas bits, but does not write them */ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + u8 val; + + int ret = tda18271_lookup_map(IR_MEASURE, freq, &val); + if (ret < 0) + goto fail; + + regs[R_EP5] &= ~0x07; + regs[R_EP5] |= (0x07 & val); +fail: + return ret; +} + +static int tda18271_calc_rf_cal(struct dvb_frontend *fe, u32 *freq) +{ + /* Sets RF Cal bits, but does not write them */ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + u8 val; + + int ret = tda18271_lookup_map(RF_CAL, freq, &val); + if (ret < 0) + goto fail; + + /* VHF_Low band only */ + if (0 == val) { + ret = -ERANGE; + goto fail; + } + regs[R_EB14] = val; +fail: + return ret; +} + static int tda18271_tune(struct dvb_frontend *fe, u32 ifc, u32 freq, u32 bw, u8 std) { struct tda18271_priv *priv = fe->tuner_priv; unsigned char *regs = priv->tda18271_regs; u32 N = 0; - u8 val; tda18271_init(fe); @@ -421,10 +526,7 @@ static int tda18271_tune(struct dvb_frontend *fe, /* RF tracking filter calibration */ /* calculate BP_Filter */ - tda18271_lookup_map(BP_FILTER, &freq, &val); - - regs[R_EP1] &= ~0x07; /* clear bp filter bits */ - regs[R_EP1] |= val; + tda18271_calc_bp_filter(fe, &freq); tda18271_write_regs(fe, R_EP1, 1); regs[R_EB4] &= 0x07; @@ -473,23 +575,14 @@ static int tda18271_tune(struct dvb_frontend *fe, msleep(5); /* RF tracking filter calibration initialization */ /* search for K,M,CO for RF Calibration */ - tda18271_lookup_map(RF_CAL_KMCO, &freq, &val); - - regs[R_EB13] &= 0x83; - regs[R_EB13] |= val; + tda18271_calc_km(fe, &freq); tda18271_write_regs(fe, R_EB13, 1); /* search for RF_BAND */ - tda18271_lookup_map(RF_BAND, &freq, &val); - - regs[R_EP2] &= ~0xe0; /* clear rf band bits */ - regs[R_EP2] |= (val << 5); + tda18271_calc_rf_band(fe, &freq); /* search for Gain_Taper */ - tda18271_lookup_map(GAIN_TAPER, &freq, &val); - - regs[R_EP2] &= ~0x1f; /* clear gain taper bits */ - regs[R_EP2] |= val; + tda18271_calc_gain_taper(fe, &freq); tda18271_write_regs(fe, R_EP2, 1); tda18271_write_regs(fe, R_EP1, 1); @@ -513,14 +606,9 @@ static int tda18271_tune(struct dvb_frontend *fe, tda18271_write_regs(fe, R_EP1, 1); - /* RF tracking filer correction for VHF_Low band */ - tda18271_lookup_map(RF_CAL, &freq, &val); - - /* VHF_Low band only */ - if (val != 0) { - regs[R_EB14] = val; + /* RF tracking filter correction for VHF_Low band */ + if (0 == tda18271_calc_rf_cal(fe, &freq)) tda18271_write_regs(fe, R_EB14, 1); - } /* Channel Configuration */ @@ -557,11 +645,8 @@ static int tda18271_tune(struct dvb_frontend *fe, regs[R_EP4] &= ~0x80; /* turn this bit on only for fm */ - /* image rejection validity EP5[2:0] */ - tda18271_lookup_map(IR_MEASURE, &freq, &val); - - regs[R_EP5] &= ~0x07; - regs[R_EP5] |= val; + /* image rejection validity */ + tda18271_calc_ir_measure(fe, &freq); /* calculate MAIN PLL */ N = freq + ifc; -- cgit v1.2.3-59-g8ed1b From 71bc9bd96b342cd29bbeaa4c83b8d37759ff22d7 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 27 Dec 2007 14:33:30 -0300 Subject: V4L/DVB (6930): xc5000: Removed erroneous defines Basic cleanup. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/xc5000.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/frontends/xc5000.c b/drivers/media/dvb/frontends/xc5000.c index 106004e12459..a036530ee4b4 100644 --- a/drivers/media/dvb/frontends/xc5000.c +++ b/drivers/media/dvb/frontends/xc5000.c @@ -39,7 +39,7 @@ MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); printk(KERN_INFO "%s: " fmt, "xc5000", ## arg) #define XC5000_DEFAULT_FIRMWARE "dvb-fe-xc5000-1.1.fw" -#define XC5000_DEFAULT_FIRMWARE_SIZE 12400 +#define XC5000_DEFAULT_FIRMWARE_SIZE 12332 /* Misc Defines */ #define MAX_TV_STANDARD 23 -- cgit v1.2.3-59-g8ed1b From 6ccb8cfbb94cc82144a92a6a28a754d9772b3aa8 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Thu, 27 Dec 2007 21:46:34 -0300 Subject: V4L/DVB (6932): cx23885: add missing subsystem ID for Hauppauge HVR1800 Retail Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.cx23885 | 2 +- drivers/media/video/cx23885/cx23885-cards.c | 4 ++++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885 index 698971d23f4e..302c84f45edb 100644 --- a/Documentation/video4linux/CARDLIST.cx23885 +++ b/Documentation/video4linux/CARDLIST.cx23885 @@ -1,6 +1,6 @@ 0 -> UNKNOWN/GENERIC [0070:3400] 1 -> Hauppauge WinTV-HVR1800lp [0070:7600] - 2 -> Hauppauge WinTV-HVR1800 [0070:7800,0070:7801] + 2 -> Hauppauge WinTV-HVR1800 [0070:7800,0070:7801,0070:7809] 3 -> Hauppauge WinTV-HVR1250 [0070:7911] 4 -> DViCO FusionHDTV5 Express [18ac:d500] 5 -> Hauppauge WinTV-HVR1500Q [0070:7797] diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index fbf93c63dcaa..3ddcab305778 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -144,6 +144,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x0070, .subdevice = 0x7801, .card = CX23885_BOARD_HAUPPAUGE_HVR1800, + },{ + .subvendor = 0x0070, + .subdevice = 0x7809, + .card = CX23885_BOARD_HAUPPAUGE_HVR1800, },{ .subvendor = 0x0070, .subdevice = 0x7911, -- cgit v1.2.3-59-g8ed1b From 6a0a962cbc2c52fad556692eabda563a01c9966c Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Thu, 27 Dec 2007 21:47:50 -0300 Subject: V4L/DVB (6933): cx23885: update model matrix for Hauppauge HVR1800 Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/cx23885-cards.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 3ddcab305778..ea1259846c24 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -206,8 +206,11 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) case 76601: /* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual channel ATSC and MPEG2 HW Encoder */ case 77001: /* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC and Basic analog */ case 77041: /* WinTV-HVR1500Q (Express Card, Retail, No IR, ATSC/QAM and Basic analog */ - case 78501: /* WinTV-HVR1800 (PCIe, Retail, IR, Dual channel ATSC and MPEG2 HW Encoder */ - case 78521: /* WinTV-HVR1800 (PCIe, Retail, IR, Dual channel ATSC and MPEG2 HW Encoder */ + case 78011: /* WinTV-HVR1800 (PCIe, Retail, 3.5mm in, IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */ + case 78501: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, Dual channel ATSC and MPEG2 HW Encoder */ + case 78521: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, Dual channel ATSC and MPEG2 HW Encoder */ + case 78531: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */ + case 78631: /* WinTV-HVR1800 (PCIe, OEM, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */ break; default: printk("%s: warning: unknown hauppauge model #%d\n", dev->name, tv.model); -- cgit v1.2.3-59-g8ed1b From 68370cf94e2511aeda3b7cb8490692570a8c9dab Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Thu, 27 Dec 2007 22:02:38 -0300 Subject: V4L/DVB (6934): cx23885: update model matrix for Hauppauge HVR1250 Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/cx23885-cards.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index ea1259846c24..4068695383ee 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -211,6 +211,10 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) case 78521: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, Dual channel ATSC and MPEG2 HW Encoder */ case 78531: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */ case 78631: /* WinTV-HVR1800 (PCIe, OEM, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */ + case 79001: /* WinTV-HVR1250 (PCIe, Retail, IR, full height, ATSC and Basic analog */ + case 79101: /* WinTV-HVR1250 (PCIe, Retail, IR, half height, ATSC and Basic analog */ + case 79571: /* WinTV-HVR1250 (PCIe, OEM, No IR, full height, ATSC and Basic analog */ + case 79671: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */ break; default: printk("%s: warning: unknown hauppauge model #%d\n", dev->name, tv.model); -- cgit v1.2.3-59-g8ed1b From b00fff0be5655614bb18a4b1d6e33b27c56c6f7e Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Thu, 27 Dec 2007 22:19:31 -0300 Subject: V4L/DVB (6935): cx23885: add missing subsystem IDs for Hauppauge HVR1500 Retail Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.cx23885 | 4 ++-- drivers/media/video/cx23885/cx23885-cards.c | 8 ++++++++ 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885 index 302c84f45edb..0924e6e142c4 100644 --- a/Documentation/video4linux/CARDLIST.cx23885 +++ b/Documentation/video4linux/CARDLIST.cx23885 @@ -3,5 +3,5 @@ 2 -> Hauppauge WinTV-HVR1800 [0070:7800,0070:7801,0070:7809] 3 -> Hauppauge WinTV-HVR1250 [0070:7911] 4 -> DViCO FusionHDTV5 Express [18ac:d500] - 5 -> Hauppauge WinTV-HVR1500Q [0070:7797] - 6 -> Hauppauge WinTV-HVR1500 [0070:7717] + 5 -> Hauppauge WinTV-HVR1500Q [0070:7790,0070:7797] + 6 -> Hauppauge WinTV-HVR1500 [0070:7710,0070:7717] diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 4068695383ee..82af44884f0b 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -156,10 +156,18 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x18ac, .subdevice = 0xd500, .card = CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP, + },{ + .subvendor = 0x0070, + .subdevice = 0x7790, + .card = CX23885_BOARD_HAUPPAUGE_HVR1500Q, },{ .subvendor = 0x0070, .subdevice = 0x7797, .card = CX23885_BOARD_HAUPPAUGE_HVR1500Q, + },{ + .subvendor = 0x0070, + .subdevice = 0x7710, + .card = CX23885_BOARD_HAUPPAUGE_HVR1500, },{ .subvendor = 0x0070, .subdevice = 0x7717, -- cgit v1.2.3-59-g8ed1b From 29a7b4cb44336a8ef85cb1d283dc6efd4cf0fa12 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Thu, 27 Dec 2007 22:22:16 -0300 Subject: V4L/DVB (6936): cx23885: update model matrix for Hauppauge HVR1500 Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/cx23885-cards.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 82af44884f0b..aa0ddf2ea224 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -212,8 +212,10 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) switch (tv.model) { case 76601: /* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual channel ATSC and MPEG2 HW Encoder */ - case 77001: /* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC and Basic analog */ - case 77041: /* WinTV-HVR1500Q (Express Card, Retail, No IR, ATSC/QAM and Basic analog */ + case 77001: /* WinTV-HVR1500 (Express Card, OEM, No IR, ATSC and Basic analog */ + case 77011: /* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC and Basic analog */ + case 77041: /* WinTV-HVR1500Q (Express Card, OEM, No IR, ATSC/QAM and Basic analog */ + case 77051: /* WinTV-HVR1500Q (Express Card, Retail, No IR, ATSC/QAM and Basic analog */ case 78011: /* WinTV-HVR1800 (PCIe, Retail, 3.5mm in, IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */ case 78501: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, Dual channel ATSC and MPEG2 HW Encoder */ case 78521: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, Dual channel ATSC and MPEG2 HW Encoder */ -- cgit v1.2.3-59-g8ed1b From a594dcba943a2edc484ed83f694c27306bf5e28e Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 31 Dec 2007 02:29:46 -0300 Subject: V4L/DVB (6938): Add a tool for extracting xc3028 version 2.7 firmware This tool allows the extraction of xc3028 v2.7 firmware from HVR 12x0 file. Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/extract_xc3028.pl | 926 ++++++++++++++++++++++++++++ 1 file changed, 926 insertions(+) create mode 100644 Documentation/video4linux/extract_xc3028.pl diff --git a/Documentation/video4linux/extract_xc3028.pl b/Documentation/video4linux/extract_xc3028.pl new file mode 100644 index 000000000000..cced8ac5c543 --- /dev/null +++ b/Documentation/video4linux/extract_xc3028.pl @@ -0,0 +1,926 @@ +#!/usr/bin/perl + +# Copyright (c) Mauro Carvalho Chehab +# Released under GPLv2 +# +# In order to use, you need to: +# 1) Download the windows driver with something like: +# wget http://www.steventoth.net/linux/xc5000/HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip +# 2) Extract the file hcw85bda.sys from the zip into the current dir: +# unzip -j HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip Driver85/hcw85bda.sys +# 3) run the script: +# ./extract_xc3028.pl +# 4) copy the generated file: +# cp xc3028-v27.fw /lib/firmware + +#use strict; +use IO::Handle; + +my $debug=0; + +sub verify ($$) +{ + my ($filename, $hash) = @_; + my ($testhash); + + if (system("which md5sum > /dev/null 2>&1")) { + die "This firmware requires the md5sum command - see http://www.gnu.org/software/coreutils/\n"; + } + + open(CMD, "md5sum ".$filename."|"); + $testhash = ; + $testhash =~ /([a-zA-Z0-9]*)/; + $testhash = $1; + close CMD; + die "Hash of extracted file does not match (found $testhash, expected $hash!\n" if ($testhash ne $hash); +} + +sub get_hunk ($$) +{ + my ($offset, $length) = @_; + my ($chunklength, $buf, $rcount, $out); + + sysseek(INFILE, $offset, SEEK_SET); + while ($length > 0) { + # Calc chunk size + $chunklength = 2048; + $chunklength = $length if ($chunklength > $length); + + $rcount = sysread(INFILE, $buf, $chunklength); + die "Ran out of data\n" if ($rcount != $chunklength); + $out .= $buf; + $length -= $rcount; + } + return $out; +} + +sub write_le16($) +{ + my $val = shift; + my $msb = ($val >> 8) &0xff; + my $lsb = $val & 0xff; + + syswrite(OUTFILE, chr($lsb).chr($msb)); +} + +sub write_le32($) +{ + my $val = shift; + my $l3 = ($val >> 24) & 0xff; + my $l2 = ($val >> 16) & 0xff; + my $l1 = ($val >> 8) & 0xff; + my $l0 = $val & 0xff; + + syswrite(OUTFILE, chr($l0).chr($l1).chr($l2).chr($l3)); +} + +sub write_le64($$) +{ + my $msb_val = shift; + my $lsb_val = shift; + my $l7 = ($msb_val >> 24) & 0xff; + my $l6 = ($msb_val >> 16) & 0xff; + my $l5 = ($msb_val >> 8) & 0xff; + my $l4 = $msb_val & 0xff; + + my $l3 = ($lsb_val >> 24) & 0xff; + my $l2 = ($lsb_val >> 16) & 0xff; + my $l1 = ($lsb_val >> 8) & 0xff; + my $l0 = $lsb_val & 0xff; + + syswrite(OUTFILE, + chr($l0).chr($l1).chr($l2).chr($l3). + chr($l4).chr($l5).chr($l6).chr($l7)); +} + +sub write_hunk($$) +{ + my ($offset, $length) = @_; + my $out = get_hunk($offset, $length); + + printf "(len %d) ",$length if ($debug); + + for (my $i=0;$i<$length;$i++) { + printf "%02x ",ord(substr($out,$i,1)) if ($debug); + } + printf "\n" if ($debug); + + syswrite(OUTFILE, $out); +} + +sub write_hunk_fix_endian($$) +{ + my ($offset, $length) = @_; + my $out = get_hunk($offset, $length); + + printf "(len_fix %d) ",$length if ($debug); + + for (my $i=0;$i<$length;$i++) { + printf "%02x ",ord(substr($out,$i,1)) if ($debug); + } + printf "\n" if ($debug); + + my $i=0; + while ($i<$length) { + my $size = ord(substr($out,$i,1))*256+ord(substr($out,$i+1,1)); + syswrite(OUTFILE, substr($out,$i+1,1)); + syswrite(OUTFILE, substr($out,$i,1)); + $i+=2; + if ($size>0 && $size <0x8000) { + for (my $j=0;$j<$size;$j++) { + syswrite(OUTFILE, substr($out,$j+$i,1)); + } + $i+=$size; + } + } +} + +sub main_firmware($$$$) +{ + my $out; + my $j=0; + my $outfile = shift; + my $name = shift; + my $version = shift; + my $nr_desc = shift; + + for ($j = length($name); $j <32; $j++) { + $name = $name.chr(0); +} + + open OUTFILE, ">$outfile"; + syswrite(OUTFILE, $name); + write_le16($version); + write_le16($nr_desc); + + # + # Firmware 0, type: BASE FW F8MHZ (0x00000003), id: (0000000000000000), size: 8718 + # + + write_le32(0x00000003); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(8718); # Size + write_hunk_fix_endian(813432, 8718); + + # + # Firmware 1, type: BASE FW F8MHZ MTS (0x00000007), id: (0000000000000000), size: 8712 + # + + write_le32(0x00000007); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(8712); # Size + write_hunk_fix_endian(822152, 8712); + + # + # Firmware 2, type: BASE FW FM (0x00000401), id: (0000000000000000), size: 8562 + # + + write_le32(0x00000401); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(8562); # Size + write_hunk_fix_endian(830872, 8562); + + # + # Firmware 3, type: BASE FW FM INPUT1 (0x00000c01), id: (0000000000000000), size: 8576 + # + + write_le32(0x00000c01); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(8576); # Size + write_hunk_fix_endian(839440, 8576); + + # + # Firmware 4, type: BASE FW (0x00000001), id: (0000000000000000), size: 8706 + # + + write_le32(0x00000001); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(8706); # Size + write_hunk_fix_endian(848024, 8706); + + # + # Firmware 5, type: BASE FW MTS (0x00000005), id: (0000000000000000), size: 8682 + # + + write_le32(0x00000005); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(8682); # Size + write_hunk_fix_endian(856736, 8682); + + # + # Firmware 6, type: STD FW (0x00000000), id: PAL/BG A2/A (0000000100000007), size: 161 + # + + write_le32(0x00000000); # Type + write_le64(0x00000001, 0x00000007); # ID + write_le32(161); # Size + write_hunk_fix_endian(865424, 161); + + # + # Firmware 7, type: STD FW MTS (0x00000004), id: PAL/BG A2/A (0000000100000007), size: 169 + # + + write_le32(0x00000004); # Type + write_le64(0x00000001, 0x00000007); # ID + write_le32(169); # Size + write_hunk_fix_endian(865592, 169); + + # + # Firmware 8, type: STD FW (0x00000000), id: PAL/BG A2/B (0000000200000007), size: 161 + # + + write_le32(0x00000000); # Type + write_le64(0x00000002, 0x00000007); # ID + write_le32(161); # Size + write_hunk_fix_endian(865424, 161); + + # + # Firmware 9, type: STD FW MTS (0x00000004), id: PAL/BG A2/B (0000000200000007), size: 169 + # + + write_le32(0x00000004); # Type + write_le64(0x00000002, 0x00000007); # ID + write_le32(169); # Size + write_hunk_fix_endian(865592, 169); + + # + # Firmware 10, type: STD FW (0x00000000), id: PAL/BG NICAM/A (0000000400000007), size: 161 + # + + write_le32(0x00000000); # Type + write_le64(0x00000004, 0x00000007); # ID + write_le32(161); # Size + write_hunk_fix_endian(866112, 161); + + # + # Firmware 11, type: STD FW MTS (0x00000004), id: PAL/BG NICAM/A (0000000400000007), size: 169 + # + + write_le32(0x00000004); # Type + write_le64(0x00000004, 0x00000007); # ID + write_le32(169); # Size + write_hunk_fix_endian(866280, 169); + + # + # Firmware 12, type: STD FW (0x00000000), id: PAL/BG NICAM/B (0000000800000007), size: 161 + # + + write_le32(0x00000000); # Type + write_le64(0x00000008, 0x00000007); # ID + write_le32(161); # Size + write_hunk_fix_endian(866112, 161); + + # + # Firmware 13, type: STD FW MTS (0x00000004), id: PAL/BG NICAM/B (0000000800000007), size: 169 + # + + write_le32(0x00000004); # Type + write_le64(0x00000008, 0x00000007); # ID + write_le32(169); # Size + write_hunk_fix_endian(866280, 169); + + # + # Firmware 14, type: STD FW (0x00000000), id: PAL/DK A2 (00000003000000e0), size: 161 + # + + write_le32(0x00000000); # Type + write_le64(0x00000003, 0x000000e0); # ID + write_le32(161); # Size + write_hunk_fix_endian(866800, 161); + + # + # Firmware 15, type: STD FW MTS (0x00000004), id: PAL/DK A2 (00000003000000e0), size: 169 + # + + write_le32(0x00000004); # Type + write_le64(0x00000003, 0x000000e0); # ID + write_le32(169); # Size + write_hunk_fix_endian(866968, 169); + + # + # Firmware 16, type: STD FW (0x00000000), id: PAL/DK NICAM (0000000c000000e0), size: 161 + # + + write_le32(0x00000000); # Type + write_le64(0x0000000c, 0x000000e0); # ID + write_le32(161); # Size + write_hunk_fix_endian(867144, 161); + + # + # Firmware 17, type: STD FW MTS (0x00000004), id: PAL/DK NICAM (0000000c000000e0), size: 169 + # + + write_le32(0x00000004); # Type + write_le64(0x0000000c, 0x000000e0); # ID + write_le32(169); # Size + write_hunk_fix_endian(867312, 169); + + # + # Firmware 18, type: STD FW (0x00000000), id: SECAM/K1 (0000000000200000), size: 161 + # + + write_le32(0x00000000); # Type + write_le64(0x00000000, 0x00200000); # ID + write_le32(161); # Size + write_hunk_fix_endian(867488, 161); + + # + # Firmware 19, type: STD FW MTS (0x00000004), id: SECAM/K1 (0000000000200000), size: 169 + # + + write_le32(0x00000004); # Type + write_le64(0x00000000, 0x00200000); # ID + write_le32(169); # Size + write_hunk_fix_endian(867656, 169); + + # + # Firmware 20, type: STD FW (0x00000000), id: SECAM/K3 (0000000004000000), size: 161 + # + + write_le32(0x00000000); # Type + write_le64(0x00000000, 0x04000000); # ID + write_le32(161); # Size + write_hunk_fix_endian(867832, 161); + + # + # Firmware 21, type: STD FW MTS (0x00000004), id: SECAM/K3 (0000000004000000), size: 169 + # + + write_le32(0x00000004); # Type + write_le64(0x00000000, 0x04000000); # ID + write_le32(169); # Size + write_hunk_fix_endian(868000, 169); + + # + # Firmware 22, type: STD FW D2633 DTV6 ATSC (0x00010030), id: (0000000000000000), size: 149 + # + + write_le32(0x00010030); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(149); # Size + write_hunk_fix_endian(868176, 149); + + # + # Firmware 23, type: STD FW D2620 DTV6 QAM (0x00000068), id: (0000000000000000), size: 149 + # + + write_le32(0x00000068); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(149); # Size + write_hunk_fix_endian(868336, 149); + + # + # Firmware 24, type: STD FW D2633 DTV6 QAM (0x00000070), id: (0000000000000000), size: 149 + # + + write_le32(0x00000070); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(149); # Size + write_hunk_fix_endian(868488, 149); + + # + # Firmware 25, type: STD FW D2620 DTV7 (0x00000088), id: (0000000000000000), size: 149 + # + + write_le32(0x00000088); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(149); # Size + write_hunk_fix_endian(868648, 149); + + # + # Firmware 26, type: STD FW D2633 DTV7 (0x00000090), id: (0000000000000000), size: 149 + # + + write_le32(0x00000090); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(149); # Size + write_hunk_fix_endian(868800, 149); + + # + # Firmware 27, type: STD FW D2620 DTV78 (0x00000108), id: (0000000000000000), size: 149 + # + + write_le32(0x00000108); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(149); # Size + write_hunk_fix_endian(868960, 149); + + # + # Firmware 28, type: STD FW D2633 DTV78 (0x00000110), id: (0000000000000000), size: 149 + # + + write_le32(0x00000110); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(149); # Size + write_hunk_fix_endian(869112, 149); + + # + # Firmware 29, type: STD FW D2620 DTV8 (0x00000208), id: (0000000000000000), size: 149 + # + + write_le32(0x00000208); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(149); # Size + write_hunk_fix_endian(868648, 149); + + # + # Firmware 30, type: STD FW D2633 DTV8 (0x00000210), id: (0000000000000000), size: 149 + # + + write_le32(0x00000210); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(149); # Size + write_hunk_fix_endian(868800, 149); + + # + # Firmware 31, type: STD FW FM (0x00000400), id: (0000000000000000), size: 135 + # + + write_le32(0x00000400); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le32(135); # Size + write_hunk_fix_endian(869584, 135); + + # + # Firmware 32, type: STD FW (0x00000000), id: PAL/I (0000000000000010), size: 161 + # + + write_le32(0x00000000); # Type + write_le64(0x00000000, 0x00000010); # ID + write_le32(161); # Size + write_hunk_fix_endian(869728, 161); + + # + # Firmware 33, type: STD FW MTS (0x00000004), id: PAL/I (0000000000000010), size: 169 + # + + write_le32(0x00000004); # Type + write_le64(0x00000000, 0x00000010); # ID + write_le32(169); # Size + write_hunk_fix_endian(869896, 169); + + # + # Firmware 34, type: STD FW (0x00000000), id: SECAM/L AM (0000001000400000), size: 169 + # + + write_le32(0x00000000); # Type + write_le64(0x00000010, 0x00400000); # ID + write_le32(169); # Size + write_hunk_fix_endian(870072, 169); + + # + # Firmware 35, type: STD FW (0x00000000), id: SECAM/L NICAM (0000000c00400000), size: 161 + # + + write_le32(0x00000000); # Type + write_le64(0x0000000c, 0x00400000); # ID + write_le32(161); # Size + write_hunk_fix_endian(870248, 161); + + # + # Firmware 36, type: STD FW (0x00000000), id: SECAM/Lc (0000000000800000), size: 161 + # + + write_le32(0x00000000); # Type + write_le64(0x00000000, 0x00800000); # ID + write_le32(161); # Size + write_hunk_fix_endian(870416, 161); + + # + # Firmware 37, type: STD FW (0x00000000), id: NTSC/M Kr (0000000000008000), size: 161 + # + + write_le32(0x00000000); # Type + write_le64(0x00000000, 0x00008000); # ID + write_le32(161); # Size + write_hunk_fix_endian(870584, 161); + + # + # Firmware 38, type: STD FW LCD (0x00001000), id: NTSC/M Kr (0000000000008000), size: 161 + # + + write_le32(0x00001000); # Type + write_le64(0x00000000, 0x00008000); # ID + write_le32(161); # Size + write_hunk_fix_endian(870752, 161); + + # + # Firmware 39, type: STD FW LCD NOGD (0x00003000), id: NTSC/M Kr (0000000000008000), size: 161 + # + + write_le32(0x00003000); # Type + write_le64(0x00000000, 0x00008000); # ID + write_le32(161); # Size + write_hunk_fix_endian(870920, 161); + + # + # Firmware 40, type: STD FW MTS (0x00000004), id: NTSC/M Kr (0000000000008000), size: 169 + # + + write_le32(0x00000004); # Type + write_le64(0x00000000, 0x00008000); # ID + write_le32(169); # Size + write_hunk_fix_endian(871088, 169); + + # + # Firmware 41, type: STD FW (0x00000000), id: NTSC PAL/M PAL/N (000000000000b700), size: 161 + # + + write_le32(0x00000000); # Type + write_le64(0x00000000, 0x0000b700); # ID + write_le32(161); # Size + write_hunk_fix_endian(871264, 161); + + # + # Firmware 42, type: STD FW LCD (0x00001000), id: NTSC PAL/M PAL/N (000000000000b700), size: 161 + # + + write_le32(0x00001000); # Type + write_le64(0x00000000, 0x0000b700); # ID + write_le32(161); # Size + write_hunk_fix_endian(871432, 161); + + # + # Firmware 43, type: STD FW LCD NOGD (0x00003000), id: NTSC PAL/M PAL/N (000000000000b700), size: 161 + # + + write_le32(0x00003000); # Type + write_le64(0x00000000, 0x0000b700); # ID + write_le32(161); # Size + write_hunk_fix_endian(871600, 161); + + # + # Firmware 44, type: STD FW (0x00000000), id: NTSC/M Jp (0000000000002000), size: 161 + # + + write_le32(0x00000000); # Type + write_le64(0x00000000, 0x00002000); # ID + write_le32(161); # Size + write_hunk_fix_endian(871264, 161); + + # + # Firmware 45, type: STD FW MTS (0x00000004), id: NTSC PAL/M PAL/N (000000000000b700), size: 169 + # + + write_le32(0x00000004); # Type + write_le64(0x00000000, 0x0000b700); # ID + write_le32(169); # Size + write_hunk_fix_endian(871936, 169); + + # + # Firmware 46, type: STD FW MTS LCD (0x00001004), id: NTSC PAL/M PAL/N (000000000000b700), size: 169 + # + + write_le32(0x00001004); # Type + write_le64(0x00000000, 0x0000b700); # ID + write_le32(169); # Size + write_hunk_fix_endian(872112, 169); + + # + # Firmware 47, type: STD FW MTS LCD NOGD (0x00003004), id: NTSC PAL/M PAL/N (000000000000b700), size: 169 + # + + write_le32(0x00003004); # Type + write_le64(0x00000000, 0x0000b700); # ID + write_le32(169); # Size + write_hunk_fix_endian(872288, 169); + + # + # Firmware 48, type: SCODE FW HAS IF (0x60000000), IF = 3.28 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(3280); # IF + write_le32(192); # Size + write_hunk(811896, 192); + + # + # Firmware 49, type: SCODE FW HAS IF (0x60000000), IF = 3.30 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(3300); # IF + write_le32(192); # Size + write_hunk(813048, 192); + + # + # Firmware 50, type: SCODE FW HAS IF (0x60000000), IF = 3.44 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(3440); # IF + write_le32(192); # Size + write_hunk(812280, 192); + + # + # Firmware 51, type: SCODE FW HAS IF (0x60000000), IF = 3.46 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(3460); # IF + write_le32(192); # Size + write_hunk(812472, 192); + + # + # Firmware 52, type: SCODE FW DTV6 ATSC OREN36 HAS IF (0x60210020), IF = 3.80 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x60210020); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(3800); # IF + write_le32(192); # Size + write_hunk(809784, 192); + + # + # Firmware 53, type: SCODE FW HAS IF (0x60000000), IF = 4.00 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(4000); # IF + write_le32(192); # Size + write_hunk(812088, 192); + + # + # Firmware 54, type: SCODE FW DTV6 ATSC TOYOTA388 HAS IF (0x60410020), IF = 4.08 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x60410020); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(4080); # IF + write_le32(192); # Size + write_hunk(809976, 192); + + # + # Firmware 55, type: SCODE FW HAS IF (0x60000000), IF = 4.20 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(4200); # IF + write_le32(192); # Size + write_hunk(811704, 192); + + # + # Firmware 56, type: SCODE FW MONO HAS IF (0x60008000), IF = 4.32 MHz id: NTSC/M Kr (0000000000008000), size: 192 + # + + write_le32(0x60008000); # Type + write_le64(0x00000000, 0x00008000); # ID + write_le16(4320); # IF + write_le32(192); # Size + write_hunk(808056, 192); + + # + # Firmware 57, type: SCODE FW HAS IF (0x60000000), IF = 4.45 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(4450); # IF + write_le32(192); # Size + write_hunk(812664, 192); + + # + # Firmware 58, type: SCODE FW HAS IF (0x60000000), IF = 4.50 MHz id: NTSC/M Jp (0000000000002000), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x00000000, 0x00002000); # ID + write_le16(4500); # IF + write_le32(192); # Size + write_hunk(807672, 192); + + # + # Firmware 59, type: SCODE FW LCD NOGD IF HAS IF (0x60023000), IF = 4.60 MHz id: NTSC/M Kr (0000000000008000), size: 192 + # + + write_le32(0x60023000); # Type + write_le64(0x00000000, 0x00008000); # ID + write_le16(4600); # IF + write_le32(192); # Size + write_hunk(807864, 192); + + # + # Firmware 60, type: SCODE FW DTV78 ZARLINK456 HAS IF (0x62000100), IF = 4.76 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x62000100); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(4760); # IF + write_le32(192); # Size + write_hunk(807288, 192); + + # + # Firmware 61, type: SCODE FW HAS IF (0x60000000), IF = 4.94 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(4940); # IF + write_le32(192); # Size + write_hunk(811512, 192); + + # + # Firmware 62, type: SCODE FW DTV7 ZARLINK456 HAS IF (0x62000080), IF = 5.26 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x62000080); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(5260); # IF + write_le32(192); # Size + write_hunk(810552, 192); + + # + # Firmware 63, type: SCODE FW MONO HAS IF (0x60008000), IF = 5.32 MHz id: PAL/BG NICAM/B (0000000800000007), size: 192 + # + + write_le32(0x60008000); # Type + write_le64(0x00000008, 0x00000007); # ID + write_le16(5320); # IF + write_le32(192); # Size + write_hunk(810744, 192); + + # + # Firmware 64, type: SCODE FW DTV8 CHINA HAS IF (0x64000200), IF = 5.40 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x64000200); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(5400); # IF + write_le32(192); # Size + write_hunk(807096, 192); + + # + # Firmware 65, type: SCODE FW DTV6 ATSC OREN538 HAS IF (0x60110020), IF = 5.58 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x60110020); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(5580); # IF + write_le32(192); # Size + write_hunk(809592, 192); + + # + # Firmware 66, type: SCODE FW HAS IF (0x60000000), IF = 5.64 MHz id: PAL/BG A2/B (0000000200000007), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x00000002, 0x00000007); # ID + write_le16(5640); # IF + write_le32(192); # Size + write_hunk(808440, 192); + + # + # Firmware 67, type: SCODE FW HAS IF (0x60000000), IF = 5.74 MHz id: PAL/BG NICAM/B (0000000800000007), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x00000008, 0x00000007); # ID + write_le16(5740); # IF + write_le32(192); # Size + write_hunk(808632, 192); + + # + # Firmware 68, type: SCODE FW DTV7 DIBCOM52 HAS IF (0x61000080), IF = 5.90 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x61000080); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(5900); # IF + write_le32(192); # Size + write_hunk(810360, 192); + + # + # Firmware 69, type: SCODE FW MONO HAS IF (0x60008000), IF = 6.00 MHz id: PAL/I (0000000000000010), size: 192 + # + + write_le32(0x60008000); # Type + write_le64(0x00000000, 0x00000010); # ID + write_le16(6000); # IF + write_le32(192); # Size + write_hunk(808824, 192); + + # + # Firmware 70, type: SCODE FW DTV6 QAM F6MHZ HAS IF (0x68000060), IF = 6.20 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x68000060); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(6200); # IF + write_le32(192); # Size + write_hunk(809400, 192); + + # + # Firmware 71, type: SCODE FW HAS IF (0x60000000), IF = 6.24 MHz id: PAL/I (0000000000000010), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x00000000, 0x00000010); # ID + write_le16(6240); # IF + write_le32(192); # Size + write_hunk(808248, 192); + + # + # Firmware 72, type: SCODE FW MONO HAS IF (0x60008000), IF = 6.32 MHz id: SECAM/K1 (0000000000200000), size: 192 + # + + write_le32(0x60008000); # Type + write_le64(0x00000000, 0x00200000); # ID + write_le16(6320); # IF + write_le32(192); # Size + write_hunk(811320, 192); + + # + # Firmware 73, type: SCODE FW HAS IF (0x60000000), IF = 6.34 MHz id: SECAM/K1 (0000000000200000), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x00000000, 0x00200000); # ID + write_le16(6340); # IF + write_le32(192); # Size + write_hunk(809208, 192); + + # + # Firmware 74, type: SCODE FW MONO HAS IF (0x60008000), IF = 6.50 MHz id: SECAM/K3 (0000000004000000), size: 192 + # + + write_le32(0x60008000); # Type + write_le64(0x00000000, 0x04000000); # ID + write_le16(6500); # IF + write_le32(192); # Size + write_hunk(811128, 192); + + # + # Firmware 75, type: SCODE FW DTV6 ATSC ATI638 HAS IF (0x60090020), IF = 6.58 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x60090020); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(6580); # IF + write_le32(192); # Size + write_hunk(807480, 192); + + # + # Firmware 76, type: SCODE FW HAS IF (0x60000000), IF = 6.60 MHz id: PAL/DK A2 (00000003000000e0), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x00000003, 0x000000e0); # ID + write_le16(6600); # IF + write_le32(192); # Size + write_hunk(809016, 192); + + # + # Firmware 77, type: SCODE FW MONO HAS IF (0x60008000), IF = 6.68 MHz id: PAL/DK A2 (00000003000000e0), size: 192 + # + + write_le32(0x60008000); # Type + write_le64(0x00000003, 0x000000e0); # ID + write_le16(6680); # IF + write_le32(192); # Size + write_hunk(810936, 192); + + # + # Firmware 78, type: SCODE FW DTV6 ATSC TOYOTA794 HAS IF (0x60810020), IF = 8.14 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x60810020); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(8140); # IF + write_le32(192); # Size + write_hunk(810168, 192); + + # + # Firmware 79, type: SCODE FW HAS IF (0x60000000), IF = 8.20 MHz id: (0000000000000000), size: 192 + # + + write_le32(0x60000000); # Type + write_le64(0x00000000, 0x00000000); # ID + write_le16(8200); # IF + write_le32(192); # Size + write_hunk(812856, 192); +} + +sub extract_firmware { + my $sourcefile = "hcw85bda.sys"; + my $hash = "0e44dbf63bb0169d57446aec21881ff2"; + my $outfile = "xc3028-v27.fw"; + my $name = "xc2028 firmware"; + my $version = 519; + my $nr_desc = 80; + my $out; + + verify($sourcefile, $hash); + + open INFILE, "<$sourcefile"; + main_firmware($outfile, $name, $version, $nr_desc); + close INFILE; +} + +extract_firmware; +printf "Firmwares generated.\n"; -- cgit v1.2.3-59-g8ed1b From 6596a4f6032f13f1bef47550fcf1d4134cd978a4 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 1 Jan 2008 14:43:02 -0300 Subject: V4L/DVB (6944): Fix in-kernel ivtv compilation Due to tuner-xc2028.h, some extra directories should be added at .h search. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/Makefile | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/media/video/ivtv/Makefile b/drivers/media/video/ivtv/Makefile index e8eefd96d897..a0389014fa88 100644 --- a/drivers/media/video/ivtv/Makefile +++ b/drivers/media/video/ivtv/Makefile @@ -6,3 +6,8 @@ ivtv-objs := ivtv-routing.o ivtv-cards.o ivtv-controls.o \ obj-$(CONFIG_VIDEO_IVTV) += ivtv.o obj-$(CONFIG_VIDEO_FB_IVTV) += ivtvfb.o + +EXTRA_CFLAGS += -Idrivers/media/video +EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core +EXTRA_CFLAGS += -Idrivers/media/dvb/frontends + -- cgit v1.2.3-59-g8ed1b From 539c96d0fd86bfdcfac75c88b74aa5798439293d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 5 Jan 2008 09:53:54 -0300 Subject: V4L/DVB (6947): Improve audio setup handling It is possible to select audio inputs via em28xx or via ac97 functions. This patch allows configuring a board to use either one way. It also do some cleanups at audio setup configurations. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-core.c | 81 +++++++++++++++++++++++++++++-- drivers/media/video/em28xx/em28xx-video.c | 21 +++----- drivers/media/video/em28xx/em28xx.h | 35 +++++-------- 3 files changed, 95 insertions(+), 42 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index d56484f20467..70c5ec268f6a 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -252,7 +252,7 @@ int em28xx_write_reg_bits(struct em28xx *dev, u16 reg, u8 val, * em28xx_write_ac97() * write a 16 bit value to the specified AC97 address (LSB first!) */ -int em28xx_write_ac97(struct em28xx *dev, u8 reg, u8 * val) +static int em28xx_write_ac97(struct em28xx *dev, u8 reg, u8 *val) { int ret; u8 addr = reg & 0x7f; @@ -268,16 +268,91 @@ int em28xx_write_ac97(struct em28xx *dev, u8 reg, u8 * val) return 0; } +int em28xx_set_audio_source(struct em28xx *dev) +{ + static char *enable = "\x08\x08"; + static char *disable = "\x08\x88"; + char *video = enable, *line = disable; + int ret, no_ac97; + u8 input; + + if (dev->is_em2800) { + if (dev->ctl_ainput) + input = EM2800_AUDIO_SRC_LINE; + else + input = EM2800_AUDIO_SRC_TUNER; + + ret = em28xx_write_regs(dev, EM2800_AUDIOSRC_REG, &input, 1); + if (ret < 0) + return ret; + } + + if (dev->has_msp34xx) + input = EM28XX_AUDIO_SRC_TUNER; + else { + switch (dev->ctl_ainput) { + case EM28XX_AMUX_VIDEO: + input = EM28XX_AUDIO_SRC_TUNER; + no_ac97 = 1; + break; + case EM28XX_AMUX_LINE_IN: + input = EM28XX_AUDIO_SRC_LINE; + no_ac97 = 1; + break; + case EM28XX_AMUX_AC97_VIDEO: + input = EM28XX_AUDIO_SRC_LINE; + break; + case EM28XX_AMUX_AC97_LINE_IN: + input = EM28XX_AUDIO_SRC_LINE; + video = disable; + line = enable; + break; + } + } + + ret = em28xx_write_reg_bits(dev, AUDIOSRC_REG, input, 0xc0); + if (ret < 0) + return ret; + + if (no_ac97) + return 0; + + /* Sets AC97 mixer registers */ + + ret = em28xx_write_ac97(dev, VIDEO_AC97, video); + if (ret < 0) + return ret; + + ret = em28xx_write_ac97(dev, LINE_IN_AC97, line); + + return ret; +} + int em28xx_audio_analog_set(struct em28xx *dev) { + int ret; char s[2] = { 0x00, 0x00 }; + s[0] |= 0x1f - dev->volume; s[1] |= 0x1f - dev->volume; + if (dev->mute) s[1] |= 0x80; - return em28xx_write_ac97(dev, MASTER_AC97, s); -} + ret = em28xx_write_ac97(dev, MASTER_AC97, s); + if (ret < 0) + return ret; + ret = em28xx_write_reg_bits(dev, XCLK_REG, + dev->mute ? 0x00 : 0x80, 0x80); + if (ret < 0) + return ret; + + /* Selects the proper audio input */ + ret = em28xx_set_audio_source(dev); + + return ret; +} +EXPORT_SYMBOL_GPL(em28xx_audio_analog_set); int em28xx_colorlevels_set_default(struct em28xx *dev) { diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index c2901f13eb25..1a284cb18c24 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -122,11 +122,13 @@ static int em28xx_config(struct em28xx *dev) /* em28xx_write_regs_req(dev,0x00,0x0f,"\x80",1); clk register */ em28xx_write_regs_req(dev,0x00,0x11,"\x51",1); - em28xx_audio_usb_mute(dev, 1); dev->mute = 1; /* maybe not the right place... */ dev->volume = 0x1f; + + /* Init XCLK_REG, audio muted */ + dev->em28xx_write_regs(dev, XCLK_REG, "\x87", 1); + em28xx_audio_analog_set(dev); - em28xx_audio_analog_setup(dev); em28xx_outfmt_set_yuv422(dev); em28xx_colorlevels_set_default(dev); em28xx_compression_disable(dev); @@ -168,7 +170,6 @@ static void em28xx_empty_framequeues(struct em28xx *dev) static void video_mux(struct em28xx *dev, int index) { - int ainput; struct v4l2_routing route; route.input = INPUT(index)->vmux; @@ -185,18 +186,9 @@ static void video_mux(struct em28xx *dev, int index) route.output = MSP_OUTPUT(MSP_SC_IN_DSP_SCART1); /* Note: this is msp3400 specific */ em28xx_i2c_call_clients(dev, VIDIOC_INT_S_AUDIO_ROUTING, &route); - ainput = EM28XX_AUDIO_SRC_TUNER; - em28xx_audio_source(dev, ainput); - } else { - switch (dev->ctl_ainput) { - case 0: - ainput = EM28XX_AUDIO_SRC_TUNER; - break; - default: - ainput = EM28XX_AUDIO_SRC_LINE; - } - em28xx_audio_source(dev, ainput); } + + em28xx_set_audio_source(dev); } /* Usage lock check functions */ @@ -292,7 +284,6 @@ static int em28xx_set_ctrl(struct em28xx *dev, const struct v4l2_control *ctrl) case V4L2_CID_AUDIO_MUTE: if (ctrl->value != dev->mute) { dev->mute = ctrl->value; - em28xx_audio_usb_mute(dev, ctrl->value); return em28xx_audio_analog_set(dev); } return 0; diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 93007cc72f4d..abde13ecb4a8 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -151,10 +151,17 @@ enum enum28xx_itype { EM28XX_RADIO, }; +enum em28xx_amux { + EM28XX_AMUX_VIDEO, + EM28XX_AMUX_LINE_IN, + EM28XX_AMUX_AC97_VIDEO, + EM28XX_AMUX_AC97_LINE_IN, +}; + struct em28xx_input { enum enum28xx_itype type; unsigned int vmux; - unsigned int amux; + enum em28xx_amux amux; }; #define INPUT(nr) (&em28xx_boards[dev->model].input[nr]) @@ -321,8 +328,9 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf, int em28xx_write_regs(struct em28xx *dev, u16 reg, char *buf, int len); int em28xx_write_reg_bits(struct em28xx *dev, u16 reg, u8 val, u8 bitmask); -int em28xx_write_ac97(struct em28xx *dev, u8 reg, u8 * val); +int em28xx_set_audio_source(struct em28xx *dev); int em28xx_audio_analog_set(struct em28xx *dev); + int em28xx_colorlevels_set_default(struct em28xx *dev); int em28xx_capture_start(struct em28xx *dev, int start); int em28xx_outfmt_set_yuv422(struct em28xx *dev); @@ -394,6 +402,7 @@ extern const unsigned int em28xx_bcount; /* em202 registers */ #define MASTER_AC97 0x02 +#define LINE_IN_AC97 0x10 #define VIDEO_AC97 0x14 /* register settings */ @@ -418,28 +427,6 @@ extern const unsigned int em28xx_bcount; printk(KERN_WARNING "%s: "fmt,\ dev->name , ##arg); } while (0) -inline static int em28xx_audio_source(struct em28xx *dev, int input) -{ - if(dev->is_em2800){ - u8 tmp = EM2800_AUDIO_SRC_TUNER; - if(input == EM28XX_AUDIO_SRC_LINE) - tmp = EM2800_AUDIO_SRC_LINE; - em28xx_write_regs(dev, EM2800_AUDIOSRC_REG, &tmp, 1); - } - return em28xx_write_reg_bits(dev, AUDIOSRC_REG, input, 0xc0); -} - -inline static int em28xx_audio_usb_mute(struct em28xx *dev, int mute) -{ - return em28xx_write_reg_bits(dev, XCLK_REG, mute ? 0x00 : 0x80, 0x80); -} - -inline static int em28xx_audio_analog_setup(struct em28xx *dev) -{ - /* unmute video mixer with default volume level */ - return em28xx_write_ac97(dev, VIDEO_AC97, "\x08\x08"); -} - inline static int em28xx_compression_disable(struct em28xx *dev) { /* side effect of disabling scaler and mixer */ -- cgit v1.2.3-59-g8ed1b From 74f38a82376fb1b289d0957429ba45349f0cad62 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 5 Jan 2008 09:54:58 -0300 Subject: V4L/DVB (6948): HVR950 requires additional settings for audio to properly work Thanks to Markus Rechberger for retriving those commands. Also, MTS firmware is required for audio to work on HVR950. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 45 +++++++++++++++++++++++++++---- drivers/media/video/em28xx/em28xx.h | 13 +++++---- 2 files changed, 48 insertions(+), 10 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index e00de3286055..78be0dc25720 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -179,6 +179,7 @@ struct em28xx_board em28xx_boards[] = { .tda9887_conf = TDA9887_PRESENT, .tuner_type = TUNER_XC2028, .has_tuner = 1, + .mts_firmware = 1, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, @@ -193,6 +194,9 @@ struct em28xx_board em28xx_boards[] = { .vmux = TVP5150_SVIDEO, .amux = 1, } }, + + /* gpio's 4, 1, 0 */ + .analog_gpio = 0x003d2d, }, [EM2880_BOARD_TERRATEC_HYBRID_XS] = { .name = "Terratec Hybrid XS", @@ -453,8 +457,18 @@ void em28xx_pre_card_setup(struct em28xx *dev) case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950: case EM2880_BOARD_TERRATEC_HYBRID_XS: - /* reset through GPIO? */ - em28xx_write_regs_req(dev, 0x00, 0x08, "\x7d", 1); + em28xx_write_regs(dev, XCLK_REG, "\x27", 1); + em28xx_write_regs(dev, I2C_CLK_REG, "\x40", 1); + em28xx_write_regs(dev, 0x08, "\xff", 1); + em28xx_write_regs(dev, 0x04, "\x00", 1); + msleep(100); + em28xx_write_regs(dev, 0x04, "\x08", 1); + msleep(100); + em28xx_write_regs(dev, 0x08, "\xff", 1); + msleep(50); + em28xx_write_regs(dev, 0x08, "\x2d", 1); + msleep(50); + em28xx_write_regs(dev, 0x08, "\x3d", 1); break; } } @@ -469,13 +483,31 @@ static int em28xx_tuner_callback(void *ptr, int command, int arg) switch (command) { case XC2028_TUNER_RESET: - /* FIXME: This is device-dependent */ + { + char gpio0, gpio1, gpio4; + + /* GPIO and initialization codes for analog TV */ + gpio0 = dev->analog_gpio & 0xff; + gpio1 = (dev->analog_gpio >> 8) & 0xff; + gpio4 = dev->analog_gpio >> 24; + dev->em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1); dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x67", 1); - msleep(140); + if (gpio4) { + dev->em28xx_write_regs(dev, 0x04, &gpio4, 1); + msleep(140); + } + + msleep(6); + dev->em28xx_write_regs(dev, 0x08, &gpio0, 1); + msleep(10); + dev->em28xx_write_regs(dev, 0x08, &gpio1, 1); + msleep(5); + break; } + } return rc; } @@ -608,6 +640,7 @@ static void em28xx_set_model(struct em28xx *dev) dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf; dev->decoder = em28xx_boards[dev->model].decoder; dev->video_inputs = em28xx_boards[dev->model].vchannels; + dev->analog_gpio = em28xx_boards[dev->model].analog_gpio; if (!em28xx_boards[dev->model].has_tuner) dev->tuner_type = UNSET; @@ -643,7 +676,9 @@ void em28xx_card_setup(struct em28xx *dev) if (tv.has_ir) request_module("ir-kbd-i2c"); #endif - /* FIXME: Should also retrieve decoder processor type */ + /* enable audio 12 mhz i2s */ + em28xx_write_regs(dev, XCLK_REG, "\xa7", 1); + msleep(10); break; } diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index abde13ecb4a8..1fb3c230e232 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -178,12 +178,13 @@ struct em28xx_board { int tuner_type; /* i2c flags */ - unsigned int is_em2800; unsigned int tda9887_conf; + unsigned int is_em2800:1; unsigned int has_tuner:1; unsigned int has_msp34xx:1; unsigned int mts_firmware:1; + unsigned int analog_gpio; enum em28xx_decoder decoder; @@ -217,15 +218,16 @@ struct em28xx { char name[30]; /* name (including minor) of the device */ int model; /* index in the device_data struct */ int devno; /* marks the number of this device */ - unsigned int is_em2800; - int video_inputs; /* number of video inputs */ - struct list_head devlist; + unsigned int analog_gpio; + unsigned int is_em2800:1; unsigned int has_tuner:1; unsigned int has_msp34xx:1; unsigned int has_tda9887:1; - unsigned int stream_on:1; /* Locks streams */ + int video_inputs; /* number of video inputs */ + struct list_head devlist; + u32 i2s_speed; /* I2S speed for audio digital stream */ enum em28xx_decoder decoder; @@ -351,6 +353,7 @@ extern const unsigned int em28xx_bcount; #define EM2800_AUDIOSRC_REG 0x08 /* em28xx registers */ +#define I2C_CLK_REG 0x06 #define CHIPID_REG 0x0a #define USBSUSP_REG 0x0c /* */ -- cgit v1.2.3-59-g8ed1b From a52932b405f23082f78ff12f4dd3e1741fcaab6f Mon Sep 17 00:00:00 2001 From: Markus Rechberger Date: Sat, 5 Jan 2008 09:55:47 -0300 Subject: V4L/DVB (6949): Adds em28xx-audio module em28xx-audio module exports em28xx Vendor Class audio as an -alsa driver. This module were written based on usbaudio driver by Markus Rechberger. Recently, he acked to allow us to merge it on kernel: http://lists-archives.org/video4linux/20408-supporting-prolink-pixelview-405-dvd-maker.html Thanks to Markus Rechberger Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-audio.c | 474 ++++++++++++++++++++++++++++++ 1 file changed, 474 insertions(+) create mode 100644 drivers/media/video/em28xx/em28xx-audio.c diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c new file mode 100644 index 000000000000..e1e1eda517a7 --- /dev/null +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -0,0 +1,474 @@ +/* + * Empiatech em28x1 audio extension + * + * Copyright (C) 2006 Markus Rechberger + * + * This driver is based on my previous au600 usb pstn audio driver + * and inherits all the copyrights + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +//#include +//#include +#include +#include "em28xx.h" + +static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; +static int em28xx_cmd(struct em28xx *dev, int cmd,int arg); + + +static int snd_pcm_alloc_vmalloc_buffer(struct snd_pcm_substream *subs, size_t size) +{ + struct snd_pcm_runtime *runtime = subs->runtime; + if(runtime->dma_area){ + if(runtime->dma_bytes > size) + return 0; + vfree(runtime->dma_area); + } + runtime->dma_area = vmalloc(size); + if(!runtime ->dma_area) + return -ENOMEM; + runtime->dma_bytes = size; + return 0; +} + +static struct snd_pcm_hardware snd_em28xx_hw_capture = { + .info = SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_MMAP_VALID, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_KNOT, + .rate_min = 48000, + .rate_max = 48000, + .channels_min = 2, + .channels_max = 2, + .buffer_bytes_max = 62720*8, /* just about the value in usbaudio.c */ + .period_bytes_min = 64, //12544/2, + .period_bytes_max = 12544, + .periods_min = 2, + .periods_max = 98, //12544, +}; + +static int snd_em28xx_capture_open(struct snd_pcm_substream *substream) +{ + int ret = 0; + int mode; + struct em28xx *dev = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + printk("opening radio device and trying to acquire exclusive lock\n"); + switch(dev->mode){ + case TUNER_STUB_DVBC_TV: + case TUNER_STUB_DVBT_TV: + case TUNER_STUB_ATSC_TV: + /* digital has no support for analog audio */ + if (ret != 0 ) { + printk("device is already in use by DVB-T\n"); + return -EINVAL; + } else { + struct v4l2_tuner tuner; + printk("switching device to FM mode\n"); + + mode = TUNER_STUB_RADIO; + memset(&tuner, 0x0, sizeof(struct v4l2_tuner)); + tuner.type = V4L2_TUNER_RADIO; + + /* enable GPIO for analog TV */ + dev->em28xx_gpio_control(dev, EM28XX_MODE, (void*)mode); + dev->mode = mode; + /* upload firmware */ + tuner_run_cmd(dev->tobj, TUNER_CMD_INIT, (void*)mode); + + /* required for devices which have kerneldriver dependencies */ +// em28xx_config(dev); +// em28xx_config_i2c(dev); + + /* this is moreover to switch the decoder to FM */ + em28xx_i2c_call_clients(dev, VIDIOC_S_TUNER, &tuner); + + dev->em28xx_write_regs(dev, 0x0f, "\x87", 1); + ret = dev->em28xx_acquire(dev, EM28XX_RADIO, 1); + em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, 0); + /* TODO switch to FM mode */ + + printk("em28xx-audio: %d mode\n", mode); + tuner_run_cmd(dev->tobj, TUNER_CMD_G_MODE, &mode); + printk("retrieved mode from tuner: %d\n",mode); + } + break; + + case TUNER_STUB_ANALOG_TV: + printk("em28xx-audio: device is currently in analog TV mode\n"); + /* unmute by default */ + dev->em28xx_write_regs(dev, 0x0f, "\x87", 1); + break; + case TUNER_STUB_RADIO: + /* check current mode and put a hard lock onto it */ + printk("em28xx-audio: device is currently in analogue FM mode\n"); + /* unmute by default here */ + dev->em28xx_write_regs(dev, 0x0f, "\x87", 1); + ret = dev->em28xx_acquire(dev, EM28XX_RADIO, 1); + if ( ret == 0 ) + printk("device is locked in fmradio mode now\n"); + break; + default: + printk("em28xx-audio: unhandled mode %d\n", dev->mode); + } + + runtime->hw = snd_em28xx_hw_capture; + if(dev->alt == 0 && dev->adev->users == 0 ) { + int errCode; + dev->alt = 7; + errCode = usb_set_interface(dev->udev, 0, 7); + printk("changing alternate number to 7\n"); + } + dev->adev->users++; + snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS); + dev->adev->capture_pcm_substream = substream; + runtime->private_data = dev; + return 0; +} + +static int snd_em28xx_pcm_close(struct snd_pcm_substream *substream) +{ + struct em28xx *dev = snd_pcm_substream_chip(substream); + int amode = 0; + dev->adev->users--; + + /* decrease audio reference */ + switch(dev->mode) { + case TUNER_STUB_ANALOG_TV: + amode = EM28XX_VIDEO; + break; + case TUNER_STUB_RADIO: + amode = EM28XX_RADIO; + break; + default: + printk("invalid mode: %d\n",dev->mode); + break; + } + + dev->em28xx_acquire(dev, amode, 0); + + if(dev->adev->users == 0 && dev->adev->shutdown == 1) { + printk("audio users: %d\n",dev->adev->users); + printk("disabling audio stream!\n"); + dev->adev->shutdown = 0; + printk("released lock\n"); + em28xx_cmd(dev,EM28XX_CAPTURE_STREAM_EN,0); + } + return 0; +} + +static int snd_em28xx_hw_capture_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *hw_params) +{ + unsigned int channels, rate, format; + int ret; + ret = snd_pcm_alloc_vmalloc_buffer(substream, params_buffer_bytes(hw_params)); + format = params_format(hw_params); + rate = params_rate(hw_params); + channels = params_channels(hw_params); + /* TODO: set up em28xx audio chip to deliver the correct audio format, current default is 48000hz multiplexed => 96000hz mono + which shouldn't matter since analogue TV only supports mono*/ + return 0; +} + +static int snd_em28xx_hw_capture_free(struct snd_pcm_substream *substream) +{ + struct em28xx *dev = snd_pcm_substream_chip(substream); + if(dev->adev->capture_stream==STREAM_ON){ + em28xx_cmd(dev,EM28XX_CAPTURE_STREAM_EN,0); + } + return 0; +} + +static int snd_em28xx_prepare(struct snd_pcm_substream *substream) +{ + return 0; +} + +static int snd_em28xx_capture_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct em28xx *dev = snd_pcm_substream_chip(substream); + switch(cmd){ + case SNDRV_PCM_TRIGGER_START: + em28xx_cmd(dev,EM28XX_CAPTURE_STREAM_EN,1); + return 0; + case SNDRV_PCM_TRIGGER_STOP: + dev->adev->shutdown=1; + return 0; + default: + return -EINVAL; + } +} + +static void em28xx_audio_isocirq(struct urb *urb) +{ + struct em28xx *dev=urb->context; + int i; + unsigned int oldptr; + unsigned long flags; + int period_elapsed = 0; + int status; + unsigned char *cp; + unsigned int stride; + struct snd_pcm_substream *substream; + struct snd_pcm_runtime *runtime; + if(dev->adev->capture_pcm_substream){ + substream=dev->adev->capture_pcm_substream; + runtime=substream->runtime; + + stride = runtime->frame_bits >> 3; + for(i=0;inumber_of_packets;i++){ + int length=urb->iso_frame_desc[i].actual_length/stride; + cp=(unsigned char *) urb->transfer_buffer + urb->iso_frame_desc[i].offset; + + if(!length) + continue; + + spin_lock_irqsave(&dev->adev->slock, flags); + oldptr = dev->adev->hwptr_done_capture; + dev->adev->hwptr_done_capture +=length; + if(dev->adev->hwptr_done_capture >= runtime->buffer_size) + dev->adev->hwptr_done_capture -= runtime->buffer_size; + + dev->adev->capture_transfer_done += length; + if(dev->adev->capture_transfer_done >= runtime->period_size){ + dev->adev->capture_transfer_done -= runtime->period_size; + period_elapsed=1; + } + spin_unlock_irqrestore(&dev->adev->slock, flags); + + if(oldptr + length >= runtime->buffer_size){ + unsigned int cnt = runtime->buffer_size-oldptr-1; + memcpy(runtime->dma_area+oldptr*stride, cp , cnt*stride); + memcpy(runtime->dma_area, cp + cnt, length*stride - cnt*stride); + } else { + memcpy(runtime->dma_area+oldptr*stride, cp, length*stride); + } + } + if(period_elapsed){ + snd_pcm_period_elapsed(substream); + } + } + urb->status = 0; + + if(dev->adev->shutdown) + return; + + if((status = usb_submit_urb(urb, GFP_ATOMIC))){ + em28xx_errdev("resubmit of audio urb failed (error=%i)\n", status); + } + return; +} + +static int em28xx_isoc_audio_deinit(struct em28xx *dev) +{ + int i; + for(i=0;iadev->urb[i]); + usb_free_urb(dev->adev->urb[i]); + dev->adev->urb[i]=NULL; + } + return 0; +} + +static int em28xx_init_audio_isoc(struct em28xx *dev) +{ + int i; + int errCode; + const int sb_size=EM28XX_NUM_AUDIO_PACKETS * EM28XX_AUDIO_MAX_PACKET_SIZE; + + + for(i=0;iadev->transfer_buffer[i]=kmalloc(sb_size,GFP_ATOMIC); + if(!dev->adev->transfer_buffer[i]){ + return -ENOMEM; + } + memset(dev->adev->transfer_buffer[i],0x80,sb_size); + urb = usb_alloc_urb(EM28XX_NUM_AUDIO_PACKETS,GFP_ATOMIC); + if(urb){ + urb->dev=dev->udev; + urb->context=dev; + urb->pipe=usb_rcvisocpipe(dev->udev,0x83); + urb->transfer_flags = URB_ISO_ASAP; + urb->transfer_buffer = dev->adev->transfer_buffer[i]; + urb->interval=1; + urb->complete = em28xx_audio_isocirq; + urb->number_of_packets = EM28XX_NUM_AUDIO_PACKETS; + urb->transfer_buffer_length = sb_size; + for(j=k=0; jiso_frame_desc[j].offset = k; + urb->iso_frame_desc[j].length=EM28XX_AUDIO_MAX_PACKET_SIZE; + } + dev->adev->urb[i]=urb; + } else { + return -ENOMEM; + } + } + for(i=0;iadev->urb[i], GFP_ATOMIC); + if (errCode){ + em28xx_isoc_audio_deinit(dev); + return errCode; + } + } + return 0; +} + + +static int em28xx_cmd(struct em28xx *dev, int cmd,int arg) +{ + switch(cmd){ + case EM28XX_CAPTURE_STREAM_EN: + if(dev->adev->capture_stream == STREAM_OFF && arg==1){ + dev->adev->capture_stream=STREAM_ON; + em28xx_init_audio_isoc(dev); + } else if (dev->adev->capture_stream==STREAM_ON && arg==0){ + dev->adev->capture_stream=STREAM_OFF; + em28xx_isoc_audio_deinit(dev); + } else { + printk("An underrun occured very likely... ignoring it\n"); + } + return 0; + default: + return -EINVAL; + } +} + +static snd_pcm_uframes_t snd_em28xx_capture_pointer(struct snd_pcm_substream *substream) +{ + struct em28xx *dev; + snd_pcm_uframes_t hwptr_done; + dev = snd_pcm_substream_chip(substream); + hwptr_done = dev->adev->hwptr_done_capture; + return hwptr_done; +} + +static struct page *snd_pcm_get_vmalloc_page(struct snd_pcm_substream *subs, + unsigned long offset) +{ + void *pageptr = subs->runtime->dma_area + offset; + return vmalloc_to_page(pageptr); +} + +static struct snd_pcm_ops snd_em28xx_pcm_capture = { + .open = snd_em28xx_capture_open, + .close = snd_em28xx_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = snd_em28xx_hw_capture_params, + .hw_free = snd_em28xx_hw_capture_free, + .prepare = snd_em28xx_prepare, + .trigger = snd_em28xx_capture_trigger, + .pointer = snd_em28xx_capture_pointer, + .page = snd_pcm_get_vmalloc_page, +}; + + +static int em28xx_audio_init(struct em28xx *dev) +{ + struct em28xx_audio *adev; + struct snd_pcm *pcm; + struct snd_card *card; + static int devnr; + int ret; + int err; + printk("em28xx-audio.c: probing for em28x1 non standard usbaudio\n"); + printk("em28xx-audio.c: Copyright (C) 2006 Markus Rechberger\n"); + adev=kzalloc(sizeof(*adev),GFP_KERNEL); + if(!adev){ + printk("em28xx-audio.c: out of memory\n"); + return -1; + } + card = snd_card_new(index[devnr], "Em28xx Audio", THIS_MODULE,0); + if(card==NULL){ + kfree(adev); + return -ENOMEM; + } + + spin_lock_init(&adev->slock); + ret=snd_pcm_new(card, "Em28xx Audio", 0, 0, 1, &pcm); + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_em28xx_pcm_capture); + pcm->info_flags = 0; + pcm->private_data = dev; + strcpy(pcm->name,"Empia 28xx Capture"); + strcpy(card->driver, "Empia Em28xx Audio"); + strcpy(card->shortname, "Em28xx Audio"); + strcpy(card->longname,"Empia Em28xx Audio"); + + if((err = snd_card_register(card))<0){ + snd_card_free(card); + return -ENOMEM; + } + adev->sndcard=card; + adev->udev=dev->udev; + dev->adev=adev; + return 0; +} + +static int em28xx_audio_fini(struct em28xx *dev) +{ + if(dev==NULL) + return 0; + if(dev->adev){ + snd_card_free(dev->adev->sndcard); + kfree(dev->adev); + dev->adev=NULL; + } + return 0; +} + +static struct em28xx_ops audio_ops = { + .id = EM28XX_AUDIO, + .name = "Em28xx Audio Extension", + .init = em28xx_audio_init, + .fini = em28xx_audio_fini, +}; + +static int __init em28xx_alsa_register(void) +{ + request_module("em28xx"); + request_module("tuner"); + return em28xx_register_extension(&audio_ops); +} + +static void __exit em28xx_alsa_unregister(void) +{ + em28xx_unregister_extension(&audio_ops); +} + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Markus Rechberger "); +MODULE_DESCRIPTION("Em28xx Audio driver"); + +module_init(em28xx_alsa_register); +module_exit(em28xx_alsa_unregister); -- cgit v1.2.3-59-g8ed1b From 1a6f11e0e8db9e76ef34bc6731d5291e4df1ba37 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 5 Jan 2008 09:56:24 -0300 Subject: V4L/DVB (6950): Lindent em28xx-audio.c Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-audio.c | 373 ++++++++++++++++-------------- 1 file changed, 197 insertions(+), 176 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index e1e1eda517a7..c631cac4c5d2 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -44,37 +44,39 @@ #include "em28xx.h" static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; -static int em28xx_cmd(struct em28xx *dev, int cmd,int arg); +static int em28xx_cmd(struct em28xx *dev, int cmd, int arg); - -static int snd_pcm_alloc_vmalloc_buffer(struct snd_pcm_substream *subs, size_t size) +static int snd_pcm_alloc_vmalloc_buffer(struct snd_pcm_substream *subs, + size_t size) { struct snd_pcm_runtime *runtime = subs->runtime; - if(runtime->dma_area){ - if(runtime->dma_bytes > size) + if (runtime->dma_area) { + if (runtime->dma_bytes > size) return 0; vfree(runtime->dma_area); } runtime->dma_area = vmalloc(size); - if(!runtime ->dma_area) + if (!runtime->dma_area) return -ENOMEM; runtime->dma_bytes = size; return 0; } static struct snd_pcm_hardware snd_em28xx_hw_capture = { - .info = SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_MMAP_VALID, + .info = + SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_MMAP_VALID, .formats = SNDRV_PCM_FMTBIT_S16_LE, .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_KNOT, .rate_min = 48000, .rate_max = 48000, .channels_min = 2, .channels_max = 2, - .buffer_bytes_max = 62720*8, /* just about the value in usbaudio.c */ - .period_bytes_min = 64, //12544/2, + .buffer_bytes_max = 62720 * 8, /* just about the value in usbaudio.c */ + .period_bytes_min = 64, //12544/2, .period_bytes_max = 12544, .periods_min = 2, - .periods_max = 98, //12544, + .periods_max = 98, //12544, }; static int snd_em28xx_capture_open(struct snd_pcm_substream *substream) @@ -84,66 +86,68 @@ static int snd_em28xx_capture_open(struct snd_pcm_substream *substream) struct em28xx *dev = snd_pcm_substream_chip(substream); struct snd_pcm_runtime *runtime = substream->runtime; printk("opening radio device and trying to acquire exclusive lock\n"); - switch(dev->mode){ - case TUNER_STUB_DVBC_TV: - case TUNER_STUB_DVBT_TV: - case TUNER_STUB_ATSC_TV: - /* digital has no support for analog audio */ - if (ret != 0 ) { - printk("device is already in use by DVB-T\n"); - return -EINVAL; - } else { - struct v4l2_tuner tuner; - printk("switching device to FM mode\n"); - - mode = TUNER_STUB_RADIO; - memset(&tuner, 0x0, sizeof(struct v4l2_tuner)); - tuner.type = V4L2_TUNER_RADIO; - - /* enable GPIO for analog TV */ - dev->em28xx_gpio_control(dev, EM28XX_MODE, (void*)mode); - dev->mode = mode; - /* upload firmware */ - tuner_run_cmd(dev->tobj, TUNER_CMD_INIT, (void*)mode); - - /* required for devices which have kerneldriver dependencies */ -// em28xx_config(dev); -// em28xx_config_i2c(dev); - - /* this is moreover to switch the decoder to FM */ - em28xx_i2c_call_clients(dev, VIDIOC_S_TUNER, &tuner); - - dev->em28xx_write_regs(dev, 0x0f, "\x87", 1); - ret = dev->em28xx_acquire(dev, EM28XX_RADIO, 1); - em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, 0); - /* TODO switch to FM mode */ - - printk("em28xx-audio: %d mode\n", mode); - tuner_run_cmd(dev->tobj, TUNER_CMD_G_MODE, &mode); - printk("retrieved mode from tuner: %d\n",mode); - } - break; - - case TUNER_STUB_ANALOG_TV: - printk("em28xx-audio: device is currently in analog TV mode\n"); - /* unmute by default */ - dev->em28xx_write_regs(dev, 0x0f, "\x87", 1); - break; - case TUNER_STUB_RADIO: - /* check current mode and put a hard lock onto it */ - printk("em28xx-audio: device is currently in analogue FM mode\n"); - /* unmute by default here */ - dev->em28xx_write_regs(dev, 0x0f, "\x87", 1); - ret = dev->em28xx_acquire(dev, EM28XX_RADIO, 1); - if ( ret == 0 ) - printk("device is locked in fmradio mode now\n"); - break; - default: - printk("em28xx-audio: unhandled mode %d\n", dev->mode); + switch (dev->mode) { + case TUNER_STUB_DVBC_TV: + case TUNER_STUB_DVBT_TV: + case TUNER_STUB_ATSC_TV: + /* digital has no support for analog audio */ + if (ret != 0) { + printk("device is already in use by DVB-T\n"); + return -EINVAL; + } else { + struct v4l2_tuner tuner; + printk("switching device to FM mode\n"); + + mode = TUNER_STUB_RADIO; + memset(&tuner, 0x0, sizeof(struct v4l2_tuner)); + tuner.type = V4L2_TUNER_RADIO; + + /* enable GPIO for analog TV */ + dev->em28xx_gpio_control(dev, EM28XX_MODE, + (void *)mode); + dev->mode = mode; + /* upload firmware */ + tuner_run_cmd(dev->tobj, TUNER_CMD_INIT, (void *)mode); + + /* required for devices which have kerneldriver dependencies */ +// em28xx_config(dev); +// em28xx_config_i2c(dev); + + /* this is moreover to switch the decoder to FM */ + em28xx_i2c_call_clients(dev, VIDIOC_S_TUNER, &tuner); + + dev->em28xx_write_regs(dev, 0x0f, "\x87", 1); + ret = dev->em28xx_acquire(dev, EM28XX_RADIO, 1); + em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, 0); + /* TODO switch to FM mode */ + + printk("em28xx-audio: %d mode\n", mode); + tuner_run_cmd(dev->tobj, TUNER_CMD_G_MODE, &mode); + printk("retrieved mode from tuner: %d\n", mode); + } + break; + + case TUNER_STUB_ANALOG_TV: + printk("em28xx-audio: device is currently in analog TV mode\n"); + /* unmute by default */ + dev->em28xx_write_regs(dev, 0x0f, "\x87", 1); + break; + case TUNER_STUB_RADIO: + /* check current mode and put a hard lock onto it */ + printk + ("em28xx-audio: device is currently in analogue FM mode\n"); + /* unmute by default here */ + dev->em28xx_write_regs(dev, 0x0f, "\x87", 1); + ret = dev->em28xx_acquire(dev, EM28XX_RADIO, 1); + if (ret == 0) + printk("device is locked in fmradio mode now\n"); + break; + default: + printk("em28xx-audio: unhandled mode %d\n", dev->mode); } runtime->hw = snd_em28xx_hw_capture; - if(dev->alt == 0 && dev->adev->users == 0 ) { + if (dev->alt == 0 && dev->adev->users == 0) { int errCode; dev->alt = 7; errCode = usb_set_interface(dev->udev, 0, 7); @@ -163,48 +167,51 @@ static int snd_em28xx_pcm_close(struct snd_pcm_substream *substream) dev->adev->users--; /* decrease audio reference */ - switch(dev->mode) { - case TUNER_STUB_ANALOG_TV: - amode = EM28XX_VIDEO; - break; - case TUNER_STUB_RADIO: - amode = EM28XX_RADIO; - break; - default: - printk("invalid mode: %d\n",dev->mode); - break; + switch (dev->mode) { + case TUNER_STUB_ANALOG_TV: + amode = EM28XX_VIDEO; + break; + case TUNER_STUB_RADIO: + amode = EM28XX_RADIO; + break; + default: + printk("invalid mode: %d\n", dev->mode); + break; } - dev->em28xx_acquire(dev, amode, 0); + dev->em28xx_acquire(dev, amode, 0); - if(dev->adev->users == 0 && dev->adev->shutdown == 1) { - printk("audio users: %d\n",dev->adev->users); + if (dev->adev->users == 0 && dev->adev->shutdown == 1) { + printk("audio users: %d\n", dev->adev->users); printk("disabling audio stream!\n"); dev->adev->shutdown = 0; printk("released lock\n"); - em28xx_cmd(dev,EM28XX_CAPTURE_STREAM_EN,0); + em28xx_cmd(dev, EM28XX_CAPTURE_STREAM_EN, 0); } return 0; } -static int snd_em28xx_hw_capture_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *hw_params) +static int snd_em28xx_hw_capture_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params) { unsigned int channels, rate, format; int ret; - ret = snd_pcm_alloc_vmalloc_buffer(substream, params_buffer_bytes(hw_params)); + ret = + snd_pcm_alloc_vmalloc_buffer(substream, + params_buffer_bytes(hw_params)); format = params_format(hw_params); rate = params_rate(hw_params); channels = params_channels(hw_params); /* TODO: set up em28xx audio chip to deliver the correct audio format, current default is 48000hz multiplexed => 96000hz mono - which shouldn't matter since analogue TV only supports mono*/ + which shouldn't matter since analogue TV only supports mono */ return 0; } static int snd_em28xx_hw_capture_free(struct snd_pcm_substream *substream) { struct em28xx *dev = snd_pcm_substream_chip(substream); - if(dev->adev->capture_stream==STREAM_ON){ - em28xx_cmd(dev,EM28XX_CAPTURE_STREAM_EN,0); + if (dev->adev->capture_stream == STREAM_ON) { + em28xx_cmd(dev, EM28XX_CAPTURE_STREAM_EN, 0); } return 0; } @@ -214,24 +221,25 @@ static int snd_em28xx_prepare(struct snd_pcm_substream *substream) return 0; } -static int snd_em28xx_capture_trigger(struct snd_pcm_substream *substream, int cmd) +static int snd_em28xx_capture_trigger(struct snd_pcm_substream *substream, + int cmd) { struct em28xx *dev = snd_pcm_substream_chip(substream); - switch(cmd){ - case SNDRV_PCM_TRIGGER_START: - em28xx_cmd(dev,EM28XX_CAPTURE_STREAM_EN,1); - return 0; - case SNDRV_PCM_TRIGGER_STOP: - dev->adev->shutdown=1; - return 0; - default: - return -EINVAL; + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + em28xx_cmd(dev, EM28XX_CAPTURE_STREAM_EN, 1); + return 0; + case SNDRV_PCM_TRIGGER_STOP: + dev->adev->shutdown = 1; + return 0; + default: + return -EINVAL; } } static void em28xx_audio_isocirq(struct urb *urb) { - struct em28xx *dev=urb->context; + struct em28xx *dev = urb->context; int i; unsigned int oldptr; unsigned long flags; @@ -241,50 +249,61 @@ static void em28xx_audio_isocirq(struct urb *urb) unsigned int stride; struct snd_pcm_substream *substream; struct snd_pcm_runtime *runtime; - if(dev->adev->capture_pcm_substream){ - substream=dev->adev->capture_pcm_substream; - runtime=substream->runtime; + if (dev->adev->capture_pcm_substream) { + substream = dev->adev->capture_pcm_substream; + runtime = substream->runtime; stride = runtime->frame_bits >> 3; - for(i=0;inumber_of_packets;i++){ - int length=urb->iso_frame_desc[i].actual_length/stride; - cp=(unsigned char *) urb->transfer_buffer + urb->iso_frame_desc[i].offset; + for (i = 0; i < urb->number_of_packets; i++) { + int length = + urb->iso_frame_desc[i].actual_length / stride; + cp = (unsigned char *)urb->transfer_buffer + + urb->iso_frame_desc[i].offset; - if(!length) + if (!length) continue; spin_lock_irqsave(&dev->adev->slock, flags); oldptr = dev->adev->hwptr_done_capture; - dev->adev->hwptr_done_capture +=length; - if(dev->adev->hwptr_done_capture >= runtime->buffer_size) - dev->adev->hwptr_done_capture -= runtime->buffer_size; + dev->adev->hwptr_done_capture += length; + if (dev->adev->hwptr_done_capture >= + runtime->buffer_size) + dev->adev->hwptr_done_capture -= + runtime->buffer_size; dev->adev->capture_transfer_done += length; - if(dev->adev->capture_transfer_done >= runtime->period_size){ - dev->adev->capture_transfer_done -= runtime->period_size; - period_elapsed=1; + if (dev->adev->capture_transfer_done >= + runtime->period_size) { + dev->adev->capture_transfer_done -= + runtime->period_size; + period_elapsed = 1; } spin_unlock_irqrestore(&dev->adev->slock, flags); - if(oldptr + length >= runtime->buffer_size){ - unsigned int cnt = runtime->buffer_size-oldptr-1; - memcpy(runtime->dma_area+oldptr*stride, cp , cnt*stride); - memcpy(runtime->dma_area, cp + cnt, length*stride - cnt*stride); + if (oldptr + length >= runtime->buffer_size) { + unsigned int cnt = + runtime->buffer_size - oldptr - 1; + memcpy(runtime->dma_area + oldptr * stride, cp, + cnt * stride); + memcpy(runtime->dma_area, cp + cnt, + length * stride - cnt * stride); } else { - memcpy(runtime->dma_area+oldptr*stride, cp, length*stride); + memcpy(runtime->dma_area + oldptr * stride, cp, + length * stride); } } - if(period_elapsed){ + if (period_elapsed) { snd_pcm_period_elapsed(substream); } } urb->status = 0; - - if(dev->adev->shutdown) + + if (dev->adev->shutdown) return; - if((status = usb_submit_urb(urb, GFP_ATOMIC))){ - em28xx_errdev("resubmit of audio urb failed (error=%i)\n", status); + if ((status = usb_submit_urb(urb, GFP_ATOMIC))) { + em28xx_errdev("resubmit of audio urb failed (error=%i)\n", + status); } return; } @@ -292,10 +311,10 @@ static void em28xx_audio_isocirq(struct urb *urb) static int em28xx_isoc_audio_deinit(struct em28xx *dev) { int i; - for(i=0;iadev->urb[i]); usb_free_urb(dev->adev->urb[i]); - dev->adev->urb[i]=NULL; + dev->adev->urb[i] = NULL; } return 0; } @@ -304,40 +323,42 @@ static int em28xx_init_audio_isoc(struct em28xx *dev) { int i; int errCode; - const int sb_size=EM28XX_NUM_AUDIO_PACKETS * EM28XX_AUDIO_MAX_PACKET_SIZE; + const int sb_size = + EM28XX_NUM_AUDIO_PACKETS * EM28XX_AUDIO_MAX_PACKET_SIZE; - - for(i=0;iadev->transfer_buffer[i]=kmalloc(sb_size,GFP_ATOMIC); - if(!dev->adev->transfer_buffer[i]){ + int j, k; + dev->adev->transfer_buffer[i] = kmalloc(sb_size, GFP_ATOMIC); + if (!dev->adev->transfer_buffer[i]) { return -ENOMEM; } - memset(dev->adev->transfer_buffer[i],0x80,sb_size); - urb = usb_alloc_urb(EM28XX_NUM_AUDIO_PACKETS,GFP_ATOMIC); - if(urb){ - urb->dev=dev->udev; - urb->context=dev; - urb->pipe=usb_rcvisocpipe(dev->udev,0x83); + memset(dev->adev->transfer_buffer[i], 0x80, sb_size); + urb = usb_alloc_urb(EM28XX_NUM_AUDIO_PACKETS, GFP_ATOMIC); + if (urb) { + urb->dev = dev->udev; + urb->context = dev; + urb->pipe = usb_rcvisocpipe(dev->udev, 0x83); urb->transfer_flags = URB_ISO_ASAP; urb->transfer_buffer = dev->adev->transfer_buffer[i]; - urb->interval=1; + urb->interval = 1; urb->complete = em28xx_audio_isocirq; urb->number_of_packets = EM28XX_NUM_AUDIO_PACKETS; urb->transfer_buffer_length = sb_size; - for(j=k=0; jiso_frame_desc[j].offset = k; - urb->iso_frame_desc[j].length=EM28XX_AUDIO_MAX_PACKET_SIZE; + urb->iso_frame_desc[j].length = + EM28XX_AUDIO_MAX_PACKET_SIZE; } - dev->adev->urb[i]=urb; + dev->adev->urb[i] = urb; } else { return -ENOMEM; } } - for(i=0;iadev->urb[i], GFP_ATOMIC); - if (errCode){ + if (errCode) { em28xx_isoc_audio_deinit(dev); return errCode; } @@ -345,27 +366,28 @@ static int em28xx_init_audio_isoc(struct em28xx *dev) return 0; } - -static int em28xx_cmd(struct em28xx *dev, int cmd,int arg) +static int em28xx_cmd(struct em28xx *dev, int cmd, int arg) { - switch(cmd){ - case EM28XX_CAPTURE_STREAM_EN: - if(dev->adev->capture_stream == STREAM_OFF && arg==1){ - dev->adev->capture_stream=STREAM_ON; - em28xx_init_audio_isoc(dev); - } else if (dev->adev->capture_stream==STREAM_ON && arg==0){ - dev->adev->capture_stream=STREAM_OFF; - em28xx_isoc_audio_deinit(dev); - } else { - printk("An underrun occured very likely... ignoring it\n"); - } - return 0; - default: - return -EINVAL; + switch (cmd) { + case EM28XX_CAPTURE_STREAM_EN: + if (dev->adev->capture_stream == STREAM_OFF && arg == 1) { + dev->adev->capture_stream = STREAM_ON; + em28xx_init_audio_isoc(dev); + } else if (dev->adev->capture_stream == STREAM_ON && arg == 0) { + dev->adev->capture_stream = STREAM_OFF; + em28xx_isoc_audio_deinit(dev); + } else { + printk + ("An underrun occured very likely... ignoring it\n"); + } + return 0; + default: + return -EINVAL; } } -static snd_pcm_uframes_t snd_em28xx_capture_pointer(struct snd_pcm_substream *substream) +static snd_pcm_uframes_t snd_em28xx_capture_pointer(struct snd_pcm_substream + *substream) { struct em28xx *dev; snd_pcm_uframes_t hwptr_done; @@ -393,7 +415,6 @@ static struct snd_pcm_ops snd_em28xx_pcm_capture = { .page = snd_pcm_get_vmalloc_page, }; - static int em28xx_audio_init(struct em28xx *dev) { struct em28xx_audio *adev; @@ -404,54 +425,54 @@ static int em28xx_audio_init(struct em28xx *dev) int err; printk("em28xx-audio.c: probing for em28x1 non standard usbaudio\n"); printk("em28xx-audio.c: Copyright (C) 2006 Markus Rechberger\n"); - adev=kzalloc(sizeof(*adev),GFP_KERNEL); - if(!adev){ + adev = kzalloc(sizeof(*adev), GFP_KERNEL); + if (!adev) { printk("em28xx-audio.c: out of memory\n"); return -1; } - card = snd_card_new(index[devnr], "Em28xx Audio", THIS_MODULE,0); - if(card==NULL){ + card = snd_card_new(index[devnr], "Em28xx Audio", THIS_MODULE, 0); + if (card == NULL) { kfree(adev); return -ENOMEM; } spin_lock_init(&adev->slock); - ret=snd_pcm_new(card, "Em28xx Audio", 0, 0, 1, &pcm); + ret = snd_pcm_new(card, "Em28xx Audio", 0, 0, 1, &pcm); snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_em28xx_pcm_capture); pcm->info_flags = 0; pcm->private_data = dev; - strcpy(pcm->name,"Empia 28xx Capture"); + strcpy(pcm->name, "Empia 28xx Capture"); strcpy(card->driver, "Empia Em28xx Audio"); strcpy(card->shortname, "Em28xx Audio"); - strcpy(card->longname,"Empia Em28xx Audio"); + strcpy(card->longname, "Empia Em28xx Audio"); - if((err = snd_card_register(card))<0){ + if ((err = snd_card_register(card)) < 0) { snd_card_free(card); return -ENOMEM; } - adev->sndcard=card; - adev->udev=dev->udev; - dev->adev=adev; + adev->sndcard = card; + adev->udev = dev->udev; + dev->adev = adev; return 0; } static int em28xx_audio_fini(struct em28xx *dev) { - if(dev==NULL) + if (dev == NULL) return 0; - if(dev->adev){ + if (dev->adev) { snd_card_free(dev->adev->sndcard); kfree(dev->adev); - dev->adev=NULL; + dev->adev = NULL; } return 0; } static struct em28xx_ops audio_ops = { - .id = EM28XX_AUDIO, - .name = "Em28xx Audio Extension", - .init = em28xx_audio_init, - .fini = em28xx_audio_fini, + .id = EM28XX_AUDIO, + .name = "Em28xx Audio Extension", + .init = em28xx_audio_init, + .fini = em28xx_audio_fini, }; static int __init em28xx_alsa_register(void) -- cgit v1.2.3-59-g8ed1b From 6d79468dd8537530f4150e76ed9b4b63f80571c6 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 5 Jan 2008 09:57:31 -0300 Subject: V4L/DVB (6951): Integrates em28xx-audio.c into em28xx kernel module Also fixes the remaining CodingStyle issues that Lindent didn't fix. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/Kconfig | 15 + drivers/media/video/em28xx/Makefile | 3 + drivers/media/video/em28xx/em28xx-audio.c | 507 +++++++++++++++--------------- drivers/media/video/em28xx/em28xx-video.c | 63 +++- drivers/media/video/em28xx/em28xx.h | 37 +++ 5 files changed, 365 insertions(+), 260 deletions(-) diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig index 813077b6ef7f..abbd38c1ebba 100644 --- a/drivers/media/video/em28xx/Kconfig +++ b/drivers/media/video/em28xx/Kconfig @@ -11,3 +11,18 @@ config VIDEO_EM28XX To compile this driver as a module, choose M here: the module will be called em28xx + +config VIDEO_EM28XX_ALSA + depends on VIDEO_EM28XX + tristate "Empia EM28xx ALSA audio module" + ---help--- + This is an ALSA driver for some Empia 28xx based TV cards. + + This is not required for em2800/em2820/em2821 boards. However, + newer em28xx devices uses Vendor Class for audio, instead of + implementing the USB Audio Class. For those chips, this module + will enable digital audio. + + To compile this driver as a module, choose M here: the + module will be called em28xx-alsa + diff --git a/drivers/media/video/em28xx/Makefile b/drivers/media/video/em28xx/Makefile index 7e7a93d75c34..0924550992d0 100644 --- a/drivers/media/video/em28xx/Makefile +++ b/drivers/media/video/em28xx/Makefile @@ -1,7 +1,10 @@ em28xx-objs := em28xx-video.o em28xx-i2c.o em28xx-cards.o em28xx-core.o \ em28xx-input.o +em28xx-alsa-objs := em28xx-audio.o + obj-$(CONFIG_VIDEO_EM28XX) += em28xx.o +obj-$(CONFIG_VIDEO_EM28XX_ALSA) += em28xx-alsa.o EXTRA_CFLAGS += -Idrivers/media/video EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index c631cac4c5d2..c91ff52aefad 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -3,6 +3,10 @@ * * Copyright (C) 2006 Markus Rechberger * + * Copyright (C) 2007 Mauro Carvalho Chehab + * - Port to work with the in-kernel driver + * - Several cleanups + * * This driver is based on my previous au600 usb pstn audio driver * and inherits all the copyrights * @@ -30,7 +34,7 @@ #include #include #include -#include +#include #include #include #include @@ -38,222 +42,52 @@ #include #include #include -//#include -//#include #include #include "em28xx.h" -static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; -static int em28xx_cmd(struct em28xx *dev, int cmd, int arg); - -static int snd_pcm_alloc_vmalloc_buffer(struct snd_pcm_substream *subs, - size_t size) -{ - struct snd_pcm_runtime *runtime = subs->runtime; - if (runtime->dma_area) { - if (runtime->dma_bytes > size) - return 0; - vfree(runtime->dma_area); - } - runtime->dma_area = vmalloc(size); - if (!runtime->dma_area) - return -ENOMEM; - runtime->dma_bytes = size; - return 0; -} +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "activates debug info"); -static struct snd_pcm_hardware snd_em28xx_hw_capture = { - .info = - SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP | - SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_MMAP_VALID, - .formats = SNDRV_PCM_FMTBIT_S16_LE, - .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_KNOT, - .rate_min = 48000, - .rate_max = 48000, - .channels_min = 2, - .channels_max = 2, - .buffer_bytes_max = 62720 * 8, /* just about the value in usbaudio.c */ - .period_bytes_min = 64, //12544/2, - .period_bytes_max = 12544, - .periods_min = 2, - .periods_max = 98, //12544, -}; +#define dprintk(fmt, arg...) do { \ + if (debug) \ + printk(KERN_INFO "em28xx-audio %s: " fmt, \ + __FUNCTION__, ##arg); \ + } while (0) -static int snd_em28xx_capture_open(struct snd_pcm_substream *substream) -{ - int ret = 0; - int mode; - struct em28xx *dev = snd_pcm_substream_chip(substream); - struct snd_pcm_runtime *runtime = substream->runtime; - printk("opening radio device and trying to acquire exclusive lock\n"); - switch (dev->mode) { - case TUNER_STUB_DVBC_TV: - case TUNER_STUB_DVBT_TV: - case TUNER_STUB_ATSC_TV: - /* digital has no support for analog audio */ - if (ret != 0) { - printk("device is already in use by DVB-T\n"); - return -EINVAL; - } else { - struct v4l2_tuner tuner; - printk("switching device to FM mode\n"); - - mode = TUNER_STUB_RADIO; - memset(&tuner, 0x0, sizeof(struct v4l2_tuner)); - tuner.type = V4L2_TUNER_RADIO; - - /* enable GPIO for analog TV */ - dev->em28xx_gpio_control(dev, EM28XX_MODE, - (void *)mode); - dev->mode = mode; - /* upload firmware */ - tuner_run_cmd(dev->tobj, TUNER_CMD_INIT, (void *)mode); - - /* required for devices which have kerneldriver dependencies */ -// em28xx_config(dev); -// em28xx_config_i2c(dev); - - /* this is moreover to switch the decoder to FM */ - em28xx_i2c_call_clients(dev, VIDIOC_S_TUNER, &tuner); - - dev->em28xx_write_regs(dev, 0x0f, "\x87", 1); - ret = dev->em28xx_acquire(dev, EM28XX_RADIO, 1); - em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, 0); - /* TODO switch to FM mode */ - - printk("em28xx-audio: %d mode\n", mode); - tuner_run_cmd(dev->tobj, TUNER_CMD_G_MODE, &mode); - printk("retrieved mode from tuner: %d\n", mode); - } - break; - - case TUNER_STUB_ANALOG_TV: - printk("em28xx-audio: device is currently in analog TV mode\n"); - /* unmute by default */ - dev->em28xx_write_regs(dev, 0x0f, "\x87", 1); - break; - case TUNER_STUB_RADIO: - /* check current mode and put a hard lock onto it */ - printk - ("em28xx-audio: device is currently in analogue FM mode\n"); - /* unmute by default here */ - dev->em28xx_write_regs(dev, 0x0f, "\x87", 1); - ret = dev->em28xx_acquire(dev, EM28XX_RADIO, 1); - if (ret == 0) - printk("device is locked in fmradio mode now\n"); - break; - default: - printk("em28xx-audio: unhandled mode %d\n", dev->mode); - } - - runtime->hw = snd_em28xx_hw_capture; - if (dev->alt == 0 && dev->adev->users == 0) { - int errCode; - dev->alt = 7; - errCode = usb_set_interface(dev->udev, 0, 7); - printk("changing alternate number to 7\n"); - } - dev->adev->users++; - snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS); - dev->adev->capture_pcm_substream = substream; - runtime->private_data = dev; - return 0; -} - -static int snd_em28xx_pcm_close(struct snd_pcm_substream *substream) -{ - struct em28xx *dev = snd_pcm_substream_chip(substream); - int amode = 0; - dev->adev->users--; - - /* decrease audio reference */ - switch (dev->mode) { - case TUNER_STUB_ANALOG_TV: - amode = EM28XX_VIDEO; - break; - case TUNER_STUB_RADIO: - amode = EM28XX_RADIO; - break; - default: - printk("invalid mode: %d\n", dev->mode); - break; - } - - dev->em28xx_acquire(dev, amode, 0); - - if (dev->adev->users == 0 && dev->adev->shutdown == 1) { - printk("audio users: %d\n", dev->adev->users); - printk("disabling audio stream!\n"); - dev->adev->shutdown = 0; - printk("released lock\n"); - em28xx_cmd(dev, EM28XX_CAPTURE_STREAM_EN, 0); - } - return 0; -} +static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; -static int snd_em28xx_hw_capture_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *hw_params) +static int em28xx_isoc_audio_deinit(struct em28xx *dev) { - unsigned int channels, rate, format; - int ret; - ret = - snd_pcm_alloc_vmalloc_buffer(substream, - params_buffer_bytes(hw_params)); - format = params_format(hw_params); - rate = params_rate(hw_params); - channels = params_channels(hw_params); - /* TODO: set up em28xx audio chip to deliver the correct audio format, current default is 48000hz multiplexed => 96000hz mono - which shouldn't matter since analogue TV only supports mono */ - return 0; -} + int i; -static int snd_em28xx_hw_capture_free(struct snd_pcm_substream *substream) -{ - struct em28xx *dev = snd_pcm_substream_chip(substream); - if (dev->adev->capture_stream == STREAM_ON) { - em28xx_cmd(dev, EM28XX_CAPTURE_STREAM_EN, 0); + dprintk("Stopping isoc\n"); + for (i = 0; i < EM28XX_AUDIO_BUFS; i++) { + usb_kill_urb(dev->adev->urb[i]); + usb_free_urb(dev->adev->urb[i]); + dev->adev->urb[i] = NULL; } - return 0; -} -static int snd_em28xx_prepare(struct snd_pcm_substream *substream) -{ return 0; } -static int snd_em28xx_capture_trigger(struct snd_pcm_substream *substream, - int cmd) -{ - struct em28xx *dev = snd_pcm_substream_chip(substream); - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - em28xx_cmd(dev, EM28XX_CAPTURE_STREAM_EN, 1); - return 0; - case SNDRV_PCM_TRIGGER_STOP: - dev->adev->shutdown = 1; - return 0; - default: - return -EINVAL; - } -} - static void em28xx_audio_isocirq(struct urb *urb) { - struct em28xx *dev = urb->context; - int i; - unsigned int oldptr; - unsigned long flags; - int period_elapsed = 0; - int status; - unsigned char *cp; - unsigned int stride; + struct em28xx *dev = urb->context; + int i; + unsigned int oldptr; + unsigned long flags; + int period_elapsed = 0; + int status; + unsigned char *cp; + unsigned int stride; struct snd_pcm_substream *substream; - struct snd_pcm_runtime *runtime; + struct snd_pcm_runtime *runtime; if (dev->adev->capture_pcm_substream) { substream = dev->adev->capture_pcm_substream; runtime = substream->runtime; - stride = runtime->frame_bits >> 3; + for (i = 0; i < urb->number_of_packets; i++) { int length = urb->iso_frame_desc[i].actual_length / stride; @@ -264,6 +98,7 @@ static void em28xx_audio_isocirq(struct urb *urb) continue; spin_lock_irqsave(&dev->adev->slock, flags); + oldptr = dev->adev->hwptr_done_capture; dev->adev->hwptr_done_capture += length; if (dev->adev->hwptr_done_capture >= @@ -278,6 +113,7 @@ static void em28xx_audio_isocirq(struct urb *urb) runtime->period_size; period_elapsed = 1; } + spin_unlock_irqrestore(&dev->adev->slock, flags); if (oldptr + length >= runtime->buffer_size) { @@ -292,82 +128,79 @@ static void em28xx_audio_isocirq(struct urb *urb) length * stride); } } - if (period_elapsed) { + if (period_elapsed) snd_pcm_period_elapsed(substream); - } } urb->status = 0; if (dev->adev->shutdown) return; - if ((status = usb_submit_urb(urb, GFP_ATOMIC))) { + status = usb_submit_urb(urb, GFP_ATOMIC); + if (status < 0) { em28xx_errdev("resubmit of audio urb failed (error=%i)\n", status); } return; } -static int em28xx_isoc_audio_deinit(struct em28xx *dev) -{ - int i; - for (i = 0; i < EM28XX_AUDIO_BUFS; i++) { - usb_kill_urb(dev->adev->urb[i]); - usb_free_urb(dev->adev->urb[i]); - dev->adev->urb[i] = NULL; - } - return 0; -} - static int em28xx_init_audio_isoc(struct em28xx *dev) { - int i; - int errCode; - const int sb_size = - EM28XX_NUM_AUDIO_PACKETS * EM28XX_AUDIO_MAX_PACKET_SIZE; + int i, errCode; + const int sb_size = EM28XX_NUM_AUDIO_PACKETS * + EM28XX_AUDIO_MAX_PACKET_SIZE; + + dprintk("Starting isoc transfers\n"); for (i = 0; i < EM28XX_AUDIO_BUFS; i++) { struct urb *urb; int j, k; + dev->adev->transfer_buffer[i] = kmalloc(sb_size, GFP_ATOMIC); - if (!dev->adev->transfer_buffer[i]) { + if (!dev->adev->transfer_buffer[i]) return -ENOMEM; - } + memset(dev->adev->transfer_buffer[i], 0x80, sb_size); urb = usb_alloc_urb(EM28XX_NUM_AUDIO_PACKETS, GFP_ATOMIC); - if (urb) { - urb->dev = dev->udev; - urb->context = dev; - urb->pipe = usb_rcvisocpipe(dev->udev, 0x83); - urb->transfer_flags = URB_ISO_ASAP; - urb->transfer_buffer = dev->adev->transfer_buffer[i]; - urb->interval = 1; - urb->complete = em28xx_audio_isocirq; - urb->number_of_packets = EM28XX_NUM_AUDIO_PACKETS; - urb->transfer_buffer_length = sb_size; - for (j = k = 0; j < EM28XX_NUM_AUDIO_PACKETS; - j++, k += EM28XX_AUDIO_MAX_PACKET_SIZE) { - urb->iso_frame_desc[j].offset = k; - urb->iso_frame_desc[j].length = - EM28XX_AUDIO_MAX_PACKET_SIZE; - } - dev->adev->urb[i] = urb; - } else { + if (!urb) return -ENOMEM; + + urb->dev = dev->udev; + urb->context = dev; + urb->pipe = usb_rcvisocpipe(dev->udev, 0x83); + urb->transfer_flags = URB_ISO_ASAP; + urb->transfer_buffer = dev->adev->transfer_buffer[i]; + urb->interval = 1; + urb->complete = em28xx_audio_isocirq; + urb->number_of_packets = EM28XX_NUM_AUDIO_PACKETS; + urb->transfer_buffer_length = sb_size; + + for (j = k = 0; j < EM28XX_NUM_AUDIO_PACKETS; + j++, k += EM28XX_AUDIO_MAX_PACKET_SIZE) { + urb->iso_frame_desc[j].offset = k; + urb->iso_frame_desc[j].length = + EM28XX_AUDIO_MAX_PACKET_SIZE; } + dev->adev->urb[i] = urb; } + for (i = 0; i < EM28XX_AUDIO_BUFS; i++) { errCode = usb_submit_urb(dev->adev->urb[i], GFP_ATOMIC); if (errCode) { em28xx_isoc_audio_deinit(dev); + return errCode; } } + return 0; } static int em28xx_cmd(struct em28xx *dev, int cmd, int arg) { + dprintk("%s transfer\n", (dev->adev->capture_stream == STREAM_ON)? + "stop" : "start"); + switch (cmd) { case EM28XX_CAPTURE_STREAM_EN: if (dev->adev->capture_stream == STREAM_OFF && arg == 1) { @@ -377,8 +210,8 @@ static int em28xx_cmd(struct em28xx *dev, int cmd, int arg) dev->adev->capture_stream = STREAM_OFF; em28xx_isoc_audio_deinit(dev); } else { - printk - ("An underrun occured very likely... ignoring it\n"); + printk(KERN_ERR "An underrun very likely occurred. " + "Ignoring it.\n"); } return 0; default: @@ -386,13 +219,167 @@ static int em28xx_cmd(struct em28xx *dev, int cmd, int arg) } } +static int snd_pcm_alloc_vmalloc_buffer(struct snd_pcm_substream *subs, + size_t size) +{ + struct snd_pcm_runtime *runtime = subs->runtime; + + dprintk("Alocating vbuffer\n"); + if (runtime->dma_area) { + if (runtime->dma_bytes > size) + return 0; + + vfree(runtime->dma_area); + } + runtime->dma_area = vmalloc(size); + if (!runtime->dma_area) + return -ENOMEM; + + runtime->dma_bytes = size; + + return 0; +} + +static struct snd_pcm_hardware snd_em28xx_hw_capture = { + .info = SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_MMAP_VALID, + + .formats = SNDRV_PCM_FMTBIT_S16_LE, + + .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_KNOT, + + .rate_min = 48000, + .rate_max = 48000, + .channels_min = 2, + .channels_max = 2, + .buffer_bytes_max = 62720 * 8, /* just about the value in usbaudio.c */ + .period_bytes_min = 64, /* 12544/2, */ + .period_bytes_max = 12544, + .periods_min = 2, + .periods_max = 98, /* 12544, */ +}; + +static int snd_em28xx_capture_open(struct snd_pcm_substream *substream) +{ + struct em28xx *dev = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + int ret = 0; + + dprintk("opening device and trying to acquire exclusive lock\n"); + + /* Sets volume, mute, etc */ + dev->mute = 0; + ret = em28xx_audio_analog_set(dev); + if (ret < 0) + goto err; + + runtime->hw = snd_em28xx_hw_capture; + if (dev->alt == 0 && dev->adev->users == 0) { + int errCode; + dev->alt = 7; + errCode = usb_set_interface(dev->udev, 0, 7); + dprintk("changing alternate number to 7\n"); + } + + dev->adev->users++; + + snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS); + dev->adev->capture_pcm_substream = substream; + runtime->private_data = dev; + + return 0; +err: + printk(KERN_ERR "Error while configuring em28xx mixer\n"); + return ret; +} + +static int snd_em28xx_pcm_close(struct snd_pcm_substream *substream) +{ + struct em28xx *dev = snd_pcm_substream_chip(substream); + dev->adev->users--; + + dprintk("closing device\n"); + + dev->mute = 1; + em28xx_audio_analog_set(dev); + + if (dev->adev->users == 0 && dev->adev->shutdown == 1) { + dprintk("audio users: %d\n", dev->adev->users); + dprintk("disabling audio stream!\n"); + dev->adev->shutdown = 0; + dprintk("released lock\n"); + em28xx_cmd(dev, EM28XX_CAPTURE_STREAM_EN, 0); + } + return 0; +} + +static int snd_em28xx_hw_capture_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params) +{ + unsigned int channels, rate, format; + int ret; + + dprintk("Setting capture parameters\n"); + + ret = snd_pcm_alloc_vmalloc_buffer(substream, + params_buffer_bytes(hw_params)); + format = params_format(hw_params); + rate = params_rate(hw_params); + channels = params_channels(hw_params); + + /* TODO: set up em28xx audio chip to deliver the correct audio format, + current default is 48000hz multiplexed => 96000hz mono + which shouldn't matter since analogue TV only supports mono */ + return 0; +} + +static int snd_em28xx_hw_capture_free(struct snd_pcm_substream *substream) +{ + struct em28xx *dev = snd_pcm_substream_chip(substream); + + dprintk("Stop capture, if needed\n"); + + if (dev->adev->capture_stream == STREAM_ON) + em28xx_cmd(dev, EM28XX_CAPTURE_STREAM_EN, 0); + + return 0; +} + +static int snd_em28xx_prepare(struct snd_pcm_substream *substream) +{ + return 0; +} + +static int snd_em28xx_capture_trigger(struct snd_pcm_substream *substream, + int cmd) +{ + struct em28xx *dev = snd_pcm_substream_chip(substream); + + dprintk("Should %s capture\n", (cmd == SNDRV_PCM_TRIGGER_START)? + "start": "stop"); + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + em28xx_cmd(dev, EM28XX_CAPTURE_STREAM_EN, 1); + return 0; + case SNDRV_PCM_TRIGGER_STOP: + dev->adev->shutdown = 1; + return 0; + default: + return -EINVAL; + } +} + static snd_pcm_uframes_t snd_em28xx_capture_pointer(struct snd_pcm_substream *substream) { struct em28xx *dev; + snd_pcm_uframes_t hwptr_done; dev = snd_pcm_substream_chip(substream); hwptr_done = dev->adev->hwptr_done_capture; + return hwptr_done; } @@ -400,34 +387,38 @@ static struct page *snd_pcm_get_vmalloc_page(struct snd_pcm_substream *subs, unsigned long offset) { void *pageptr = subs->runtime->dma_area + offset; + return vmalloc_to_page(pageptr); } static struct snd_pcm_ops snd_em28xx_pcm_capture = { - .open = snd_em28xx_capture_open, - .close = snd_em28xx_pcm_close, - .ioctl = snd_pcm_lib_ioctl, + .open = snd_em28xx_capture_open, + .close = snd_em28xx_pcm_close, + .ioctl = snd_pcm_lib_ioctl, .hw_params = snd_em28xx_hw_capture_params, - .hw_free = snd_em28xx_hw_capture_free, - .prepare = snd_em28xx_prepare, - .trigger = snd_em28xx_capture_trigger, - .pointer = snd_em28xx_capture_pointer, - .page = snd_pcm_get_vmalloc_page, + .hw_free = snd_em28xx_hw_capture_free, + .prepare = snd_em28xx_prepare, + .trigger = snd_em28xx_capture_trigger, + .pointer = snd_em28xx_capture_pointer, + .page = snd_pcm_get_vmalloc_page, }; static int em28xx_audio_init(struct em28xx *dev) { struct em28xx_audio *adev; - struct snd_pcm *pcm; - struct snd_card *card; - static int devnr; - int ret; - int err; - printk("em28xx-audio.c: probing for em28x1 non standard usbaudio\n"); - printk("em28xx-audio.c: Copyright (C) 2006 Markus Rechberger\n"); + struct snd_pcm *pcm; + struct snd_card *card; + static int devnr; + int ret, err; + + printk(KERN_INFO "em28xx-audio.c: probing for em28x1 " + "non standard usbaudio\n"); + printk(KERN_INFO "em28xx-audio.c: Copyright (C) 2006 Markus " + "Rechberger\n"); + adev = kzalloc(sizeof(*adev), GFP_KERNEL); if (!adev) { - printk("em28xx-audio.c: out of memory\n"); + printk(KERN_ERR "em28xx-audio.c: out of memory\n"); return -1; } card = snd_card_new(index[devnr], "Em28xx Audio", THIS_MODULE, 0); @@ -446,13 +437,15 @@ static int em28xx_audio_init(struct em28xx *dev) strcpy(card->shortname, "Em28xx Audio"); strcpy(card->longname, "Empia Em28xx Audio"); - if ((err = snd_card_register(card)) < 0) { + err = snd_card_register(card); + if (err < 0) { snd_card_free(card); return -ENOMEM; } adev->sndcard = card; adev->udev = dev->udev; dev->adev = adev; + return 0; } @@ -460,16 +453,18 @@ static int em28xx_audio_fini(struct em28xx *dev) { if (dev == NULL) return 0; + if (dev->adev) { snd_card_free(dev->adev->sndcard); kfree(dev->adev); dev->adev = NULL; } + return 0; } static struct em28xx_ops audio_ops = { - .id = EM28XX_AUDIO, + .id = EM28XX_AUDIO, .name = "Em28xx Audio Extension", .init = em28xx_audio_init, .fini = em28xx_audio_fini, @@ -478,7 +473,6 @@ static struct em28xx_ops audio_ops = { static int __init em28xx_alsa_register(void) { request_module("em28xx"); - request_module("tuner"); return em28xx_register_extension(&audio_ops); } @@ -489,6 +483,7 @@ static void __exit em28xx_alsa_unregister(void) MODULE_LICENSE("GPL"); MODULE_AUTHOR("Markus Rechberger "); +MODULE_AUTHOR("Mauro Carvalho Chehab "); MODULE_DESCRIPTION("Em28xx Audio driver"); module_init(em28xx_alsa_register); diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 1a284cb18c24..caa4757b7eb6 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -1599,9 +1599,48 @@ static const struct video_device em28xx_video_template = { .current_norm = V4L2_STD_PAL, }; - /******************************** usb interface *****************************************/ + +static LIST_HEAD(em28xx_extension_devlist); +static DEFINE_MUTEX(em28xx_extension_devlist_lock); + +int em28xx_register_extension(struct em28xx_ops *ops) +{ + struct em28xx *h, *dev = NULL; + + list_for_each_entry(h, &em28xx_devlist, devlist) + dev = h; + + mutex_lock(&em28xx_extension_devlist_lock); + list_add_tail(&ops->next, &em28xx_extension_devlist); + if (dev) + ops->init(dev); + + printk(KERN_INFO "Em28xx: Initialized (%s) extension\n", ops->name); + mutex_unlock(&em28xx_extension_devlist_lock); + + return 0; +} +EXPORT_SYMBOL(em28xx_register_extension); + +void em28xx_unregister_extension(struct em28xx_ops *ops) +{ + struct em28xx *h, *dev = NULL; + + list_for_each_entry(h, &em28xx_devlist, devlist) + dev = h; + + if (dev) + ops->fini(dev); + + mutex_lock(&em28xx_extension_devlist_lock); + printk(KERN_INFO "Em28xx: Removed (%s) extension\n", ops->name); + list_del(&ops->next); + mutex_unlock(&em28xx_extension_devlist_lock); +} +EXPORT_SYMBOL(em28xx_unregister_extension); + /* * em28xx_init_dev() * allocates and inits the device structs, registers i2c bus and v4l device @@ -1609,6 +1648,7 @@ static const struct video_device em28xx_video_template = { static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, int minor) { + struct em28xx_ops *ops = NULL; struct em28xx *dev = *devhandle; int retval = -ENOMEM; int errCode; @@ -1742,6 +1782,15 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, dev->vdev->minor-MINOR_VFL_TYPE_GRABBER_MIN, dev->vbi_dev->minor-MINOR_VFL_TYPE_VBI_MIN); + mutex_lock(&em28xx_extension_devlist_lock); + if (!list_empty(&em28xx_extension_devlist)) { + list_for_each_entry(ops, &em28xx_extension_devlist, next) { + if (ops->id) + ops->init(dev); + } + } + mutex_unlock(&em28xx_extension_devlist_lock); + return 0; } @@ -1862,6 +1911,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, static void em28xx_usb_disconnect(struct usb_interface *interface) { struct em28xx *dev; + struct em28xx_ops *ops = NULL; dev = usb_get_intfdata(interface); usb_set_intfdata(interface, NULL); @@ -1891,15 +1941,20 @@ static void em28xx_usb_disconnect(struct usb_interface *interface) dev->state |= DEV_DISCONNECTED; em28xx_release_resources(dev); } - - mutex_unlock(&dev->lock); + mutex_lock(&em28xx_extension_devlist_lock); + if (!list_empty(&em28xx_extension_devlist)) { + list_for_each_entry(ops, &em28xx_extension_devlist, next) { + ops->fini(dev); + } + } + mutex_unlock(&em28xx_extension_devlist_lock); + if (!dev->users) { kfree(dev->alt_max_pkt_size); kfree(dev); } - } static struct usb_driver em28xx_usb_driver = { diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 1fb3c230e232..c2d9ae0ac618 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -212,6 +212,28 @@ enum em28xx_dev_state { DEV_MISCONFIGURED = 0x04, }; +#define EM28XX_AUDIO_BUFS 5 +#define EM28XX_NUM_AUDIO_PACKETS 64 +#define EM28XX_AUDIO_MAX_PACKET_SIZE 196 /* static value */ +#define EM28XX_CAPTURE_STREAM_EN 1 +#define EM28XX_AUDIO 0x10 + +struct em28xx_audio { + char name[50]; + char *transfer_buffer[EM28XX_AUDIO_BUFS]; + struct urb *urb[EM28XX_AUDIO_BUFS]; + struct usb_device *udev; + unsigned int capture_transfer_done; + struct snd_pcm_substream *capture_pcm_substream; + + unsigned int hwptr_done_capture; + struct snd_card *sndcard; + + int users, shutdown; + enum em28xx_stream_state capture_stream; + spinlock_t slock; +}; + /* main device struct */ struct em28xx { /* generic device properties */ @@ -266,6 +288,8 @@ struct em28xx { unsigned long hash; /* eeprom hash - for boards with generic ID */ unsigned long i2c_hash; /* i2c devicelist hash - for boards with generic ID */ + struct em28xx_audio *adev; + /* states */ enum em28xx_dev_state state; enum em28xx_stream_state stream; @@ -302,6 +326,15 @@ struct em28xx { struct em28xx_fh { struct em28xx *dev; unsigned int stream_on:1; /* Locks streams */ + int radio; +}; + +struct em28xx_ops { + struct list_head next; + char *name; + int id; + int (*init)(struct em28xx *); + int (*fini)(struct em28xx *); }; /* Provided by em28xx-i2c.c */ @@ -341,6 +374,10 @@ int em28xx_init_isoc(struct em28xx *dev); void em28xx_uninit_isoc(struct em28xx *dev); int em28xx_set_alternate(struct em28xx *dev); +/* Provided by em28xx-video.c */ +int em28xx_register_extension(struct em28xx_ops *dev); +void em28xx_unregister_extension(struct em28xx_ops *dev); + /* Provided by em28xx-cards.c */ extern int em2800_variant_detect(struct usb_device* udev,int model); extern void em28xx_pre_card_setup(struct em28xx *dev); -- cgit v1.2.3-59-g8ed1b From d7448a8d9d06ca2ca4fd1f17404450ecba8bea3a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 5 Jan 2008 09:59:03 -0300 Subject: V4L/DVB (6952): Add code for autoloading em28xx-alsa, if needed Older em28xx devices does implement standard Audio Class. However, on newer devices, this were replaced by a Vendor Class. This patch autodetects that an em28xx lacks Audio Class and auto-loads em28xx-alsa, for the devices that implements only a Vendor Class. For devices with Audio Class, snd-usb-audio module will provide an ALSA interface. This patch uses the request_module_async function as defined on cx88-mpeg.c, originally wrote by Markus Rechberger. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-audio.c | 1 - drivers/media/video/em28xx/em28xx-video.c | 38 +++++++++++++++++++++++++++++++ drivers/media/video/em28xx/em28xx.h | 3 +++ 3 files changed, 41 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index c91ff52aefad..941357c4f3f5 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -472,7 +472,6 @@ static struct em28xx_ops audio_ops = { static int __init em28xx_alsa_register(void) { - request_module("em28xx"); return em28xx_register_extension(&audio_ops); } diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index caa4757b7eb6..a03e9d724b5f 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -1668,6 +1668,10 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, dev->em28xx_read_reg_req = em28xx_read_reg_req; dev->is_em2800 = em28xx_boards[dev->model].is_em2800; + errCode = em28xx_read_reg(dev, CHIPID_REG); + if (errCode >= 0) + em28xx_info("em28xx chip ID = %d\n", errCode); + em28xx_pre_card_setup(dev); errCode = em28xx_config(dev); @@ -1794,6 +1798,25 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, return 0; } +#if defined(CONFIG_MODULES) && defined(MODULE) +static void request_module_async(struct work_struct *work) +{ + struct em28xx *dev = container_of(work, + struct em28xx, request_module_wk); + + if (!dev->has_audio_class) + request_module("em28xx-alsa"); +} + +static void request_modules(struct em28xx *dev) +{ + INIT_WORK(&dev->request_module_wk, request_module_async); + schedule_work(&dev->request_module_wk); +} +#else +#define request_modules(dev) +#endif /* CONFIG_MODULES */ + /* * em28xx_usb_probe() * checks for supported devices @@ -1864,6 +1887,18 @@ static int em28xx_usb_probe(struct usb_interface *interface, dev->devno = nr; dev->model = id->driver_info; + /* Checks if audio is provided by some interface */ + for (i = 0; i < udev->config->desc.bNumInterfaces; i++) { + uif = udev->config->interface[i]; + if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { + dev->has_audio_class = 1; + break; + } + } + + printk(KERN_INFO DRIVER_NAME " %s usb audio class\n", + dev->has_audio_class ? "Has" : "Doesn't have"); + /* compute alternate max packet sizes */ uif = udev->actconfig->interface[0]; @@ -1900,6 +1935,9 @@ static int em28xx_usb_probe(struct usb_interface *interface, /* save our data pointer in this interface device */ usb_set_intfdata(interface, dev); + + request_modules(dev); + return 0; } diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index c2d9ae0ac618..9eb213132da1 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -246,6 +246,7 @@ struct em28xx { unsigned int has_msp34xx:1; unsigned int has_tda9887:1; unsigned int stream_on:1; /* Locks streams */ + unsigned int has_audio_class:1; int video_inputs; /* number of video inputs */ struct list_head devlist; @@ -295,6 +296,8 @@ struct em28xx { enum em28xx_stream_state stream; enum em28xx_io_method io; + struct work_struct request_module_wk; + /* locks */ struct mutex lock; spinlock_t queue_lock; -- cgit v1.2.3-59-g8ed1b From e545d6e2760b51163da141caffd288572c2db08d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 5 Jan 2008 16:37:04 -0300 Subject: V4L/DVB (6953): Fix radio set frequency logic Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 67b9ed1ac71a..35976e6cb1b8 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -247,7 +247,7 @@ static void set_radio_freq(struct i2c_client *c, unsigned int freq) tuner_warn ("tuner type not set\n"); return; } - if (analog_ops->set_params) { + if (NULL == analog_ops->set_params) { tuner_warn ("tuner has no way to set radio frequency\n"); return; } -- cgit v1.2.3-59-g8ed1b From 0f6dac18ccc6fb0c95f3e0269e60239661c9b4c5 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 5 Jan 2008 16:47:16 -0300 Subject: V4L/DVB (6954): There isn't a MTS radio firmware Try to load non-MTS firmware instead. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-xc2028.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/tuner-xc2028.c b/drivers/media/video/tuner-xc2028.c index 1817bf67dad1..f191f6a48070 100644 --- a/drivers/media/video/tuner-xc2028.c +++ b/drivers/media/video/tuner-xc2028.c @@ -663,7 +663,7 @@ static int check_firmware(struct dvb_frontend *fe, unsigned int type, return rc; } - if (priv->ctrl.mts) + if (priv->ctrl.mts && !(type & FM)) type |= MTS; retry: -- cgit v1.2.3-59-g8ed1b From 3abee53e4402b6ae39e1e610f9ef94eb74097138 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 5 Jan 2008 17:01:41 -0300 Subject: V4L/DVB (6955): Properly implement 12MHz I2S support Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 20 +++++++++----------- drivers/media/video/em28xx/em28xx-core.c | 11 +++++++++-- drivers/media/video/em28xx/em28xx-video.c | 7 +++---- drivers/media/video/em28xx/em28xx.h | 3 +++ 4 files changed, 24 insertions(+), 17 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 78be0dc25720..1011813ad7c2 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -174,13 +174,14 @@ struct em28xx_board em28xx_boards[] = { } }, }, [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950] = { - .name = "Hauppauge WinTV HVR 950", - .vchannels = 3, - .tda9887_conf = TDA9887_PRESENT, - .tuner_type = TUNER_XC2028, - .has_tuner = 1, - .mts_firmware = 1, - .decoder = EM28XX_TVP5150, + .name = "Hauppauge WinTV HVR 950", + .vchannels = 3, + .tda9887_conf = TDA9887_PRESENT, + .tuner_type = TUNER_XC2028, + .has_tuner = 1, + .mts_firmware = 1, + .has_12mhz_i2s = 1, + .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, @@ -641,6 +642,7 @@ static void em28xx_set_model(struct em28xx *dev) dev->decoder = em28xx_boards[dev->model].decoder; dev->video_inputs = em28xx_boards[dev->model].vchannels; dev->analog_gpio = em28xx_boards[dev->model].analog_gpio; + dev->has_12mhz_i2s = em28xx_boards[dev->model].has_12mhz_i2s; if (!em28xx_boards[dev->model].has_tuner) dev->tuner_type = UNSET; @@ -676,10 +678,6 @@ void em28xx_card_setup(struct em28xx *dev) if (tv.has_ir) request_module("ir-kbd-i2c"); #endif - /* enable audio 12 mhz i2s */ - em28xx_write_regs(dev, XCLK_REG, "\xa7", 1); - msleep(10); - break; } case EM2820_BOARD_KWORLD_PVRTV2800RF: diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index 70c5ec268f6a..f6b78357f0e5 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -332,6 +332,7 @@ int em28xx_audio_analog_set(struct em28xx *dev) { int ret; char s[2] = { 0x00, 0x00 }; + u8 xclk = 0x07; s[0] |= 0x1f - dev->volume; s[1] |= 0x1f - dev->volume; @@ -342,10 +343,16 @@ int em28xx_audio_analog_set(struct em28xx *dev) if (ret < 0) return ret; - ret = em28xx_write_reg_bits(dev, XCLK_REG, - dev->mute ? 0x00 : 0x80, 0x80); + if (dev->has_12mhz_i2s) + xclk |= 0x20; + + if (!dev->mute) + xclk |= 0x80; + + ret = em28xx_write_reg_bits(dev, XCLK_REG, xclk, 0xa7); if (ret < 0) return ret; + msleep(10); /* Selects the proper audio input */ ret = em28xx_set_audio_source(dev); diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index a03e9d724b5f..0f075f532eae 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -125,10 +125,6 @@ static int em28xx_config(struct em28xx *dev) dev->mute = 1; /* maybe not the right place... */ dev->volume = 0x1f; - /* Init XCLK_REG, audio muted */ - dev->em28xx_write_regs(dev, XCLK_REG, "\x87", 1); - - em28xx_audio_analog_set(dev); em28xx_outfmt_set_yuv422(dev); em28xx_colorlevels_set_default(dev); em28xx_compression_disable(dev); @@ -1688,6 +1684,9 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, /* Do board specific init and eeprom reading */ em28xx_card_setup(dev); + /* Configure audio */ + em28xx_audio_analog_set(dev); + /* configure the device */ em28xx_config_i2c(dev); diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 9eb213132da1..2d57330c4537 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -184,6 +184,8 @@ struct em28xx_board { unsigned int has_tuner:1; unsigned int has_msp34xx:1; unsigned int mts_firmware:1; + unsigned int has_12mhz_i2s:1; + unsigned int analog_gpio; enum em28xx_decoder decoder; @@ -247,6 +249,7 @@ struct em28xx { unsigned int has_tda9887:1; unsigned int stream_on:1; /* Locks streams */ unsigned int has_audio_class:1; + unsigned int has_12mhz_i2s:1; int video_inputs; /* number of video inputs */ struct list_head devlist; -- cgit v1.2.3-59-g8ed1b From 0be4375410f1ecc917f3c0caf8f98908d357c93f Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 5 Jan 2008 17:22:01 -0300 Subject: V4L/DVB (6956): Add Radio support for em28xx Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-video.c | 296 ++++++++++++++++++++++++------ drivers/media/video/em28xx/em28xx.h | 2 + 2 files changed, 238 insertions(+), 60 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 0f075f532eae..5a90462d82e5 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -61,13 +61,17 @@ static LIST_HEAD(em28xx_devlist); static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET }; static unsigned int video_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET }; -static unsigned int vbi_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET }; +static unsigned int vbi_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET }; +static unsigned int radio_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET }; + module_param_array(card, int, NULL, 0444); module_param_array(video_nr, int, NULL, 0444); module_param_array(vbi_nr, int, NULL, 0444); -MODULE_PARM_DESC(card,"card type"); -MODULE_PARM_DESC(video_nr,"video device numbers"); -MODULE_PARM_DESC(vbi_nr,"vbi device numbers"); +module_param_array(radio_nr, int, NULL, 0444); +MODULE_PARM_DESC(card, "card type"); +MODULE_PARM_DESC(video_nr, "video device numbers"); +MODULE_PARM_DESC(vbi_nr, "vbi device numbers"); +MODULE_PARM_DESC(radio_nr, "radio device numbers"); static unsigned int video_debug = 0; module_param(video_debug,int,0644); @@ -791,7 +795,7 @@ static int vidioc_g_frequency(struct file *file, void *priv, struct em28xx_fh *fh = priv; struct em28xx *dev = fh->dev; - f->type = V4L2_TUNER_ANALOG_TV; + f->type = fh->radio ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; f->frequency = dev->ctl_freq; return 0; @@ -811,7 +815,9 @@ static int vidioc_s_frequency(struct file *file, void *priv, if (0 != f->tuner) return -EINVAL; - if (V4L2_TUNER_ANALOG_TV != f->type) + if (unlikely(0 == fh->radio && f->type != V4L2_TUNER_ANALOG_TV)) + return -EINVAL; + if (unlikely(1 == fh->radio && f->type != V4L2_TUNER_RADIO)) return -EINVAL; mutex_lock(&dev->lock); @@ -1148,6 +1154,102 @@ static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) return 0; } +/* ----------------------------------------------------------- */ +/* RADIO ESPECIFIC IOCTLS */ +/* ----------------------------------------------------------- */ + +static int radio_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct em28xx *dev = ((struct em28xx_fh *)priv)->dev; + + strlcpy(cap->driver, "em28xx", sizeof(cap->driver)); + strlcpy(cap->card, em28xx_boards[dev->model].name, sizeof(cap->card)); + strlcpy(cap->bus_info, dev->udev->dev.bus_id, sizeof(cap->bus_info)); + + cap->version = EM28XX_VERSION_CODE; + cap->capabilities = V4L2_CAP_TUNER; + return 0; +} + +static int radio_g_tuner(struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct em28xx *dev = ((struct em28xx_fh *)priv)->dev; + + if (unlikely(t->index > 0)) + return -EINVAL; + + strcpy(t->name, "Radio"); + t->type = V4L2_TUNER_RADIO; + + em28xx_i2c_call_clients(dev, VIDIOC_G_TUNER, t); + return 0; +} + +static int radio_enum_input(struct file *file, void *priv, + struct v4l2_input *i) +{ + if (i->index != 0) + return -EINVAL; + strcpy(i->name, "Radio"); + i->type = V4L2_INPUT_TYPE_TUNER; + + return 0; +} + +static int radio_g_audio(struct file *file, void *priv, struct v4l2_audio *a) +{ + if (unlikely(a->index)) + return -EINVAL; + + strcpy(a->name, "Radio"); + return 0; +} + +static int radio_s_tuner(struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct em28xx *dev = ((struct em28xx_fh *)priv)->dev; + + if (0 != t->index) + return -EINVAL; + + em28xx_i2c_call_clients(dev, VIDIOC_S_TUNER, t); + + return 0; +} + +static int radio_s_audio(struct file *file, void *fh, + struct v4l2_audio *a) +{ + return 0; +} + +static int radio_s_input(struct file *file, void *fh, unsigned int i) +{ + return 0; +} + +static int radio_queryctrl(struct file *file, void *priv, + struct v4l2_queryctrl *qc) +{ + int i; + + if (qc->id < V4L2_CID_BASE || + qc->id >= V4L2_CID_LASTP1) + return -EINVAL; + + for (i = 0; i < ARRAY_SIZE(em28xx_qctrl); i++) { + if (qc->id && qc->id == em28xx_qctrl[i].id) { + memcpy(qc, &(em28xx_qctrl[i]), sizeof(*qc)); + return 0; + } + } + + return -EINVAL; +} + /* * em28xx_v4l2_open() * inits the device and starts isoc transfer @@ -1155,7 +1257,7 @@ static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) static int em28xx_v4l2_open(struct inode *inode, struct file *filp) { int minor = iminor(inode); - int errCode = 0; + int errCode = 0, radio = 0; struct em28xx *h,*dev = NULL; struct em28xx_fh *fh; @@ -1168,6 +1270,11 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) dev = h; dev->type = V4L2_BUF_TYPE_VBI_CAPTURE; } + if (h->radio_dev && + h->radio_dev->minor == minor) { + radio = 1; + dev = h; + } } if (NULL == dev) return -ENODEV; @@ -1183,6 +1290,7 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) } mutex_lock(&dev->lock); fh->dev = dev; + fh->radio = radio; filp->private_data = fh; if (dev->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && dev->users == 0) { @@ -1207,6 +1315,10 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) em28xx_empty_framequeues(dev); } + if (fh->radio) { + em28xx_videodbg("video_open: setting radio device\n"); + em28xx_i2c_call_clients(dev, AUDC_SET_RADIO, NULL); + } dev->users++; @@ -1229,12 +1341,30 @@ static void em28xx_release_resources(struct em28xx *dev) dev->vdev->minor-MINOR_VFL_TYPE_GRABBER_MIN, dev->vbi_dev->minor-MINOR_VFL_TYPE_VBI_MIN); list_del(&dev->devlist); - video_unregister_device(dev->vdev); - video_unregister_device(dev->vbi_dev); + if (dev->radio_dev) { + if (-1 != dev->radio_dev->minor) + video_unregister_device(dev->radio_dev); + else + video_device_release(dev->radio_dev); + dev->radio_dev = NULL; + } + if (dev->vbi_dev) { + if (-1 != dev->vbi_dev->minor) + video_unregister_device(dev->vbi_dev); + else + video_device_release(dev->vbi_dev); + dev->vbi_dev = NULL; + } + if (dev->vdev) { + if (-1 != dev->vdev->minor) + video_unregister_device(dev->vdev); + else + video_device_release(dev->vdev); + dev->vdev = NULL; + } em28xx_i2c_unregister(dev); usb_put_dev(dev->udev); - /* Mark device as unused */ em28xx_devused&=~(1<devno); } @@ -1555,6 +1685,15 @@ static const struct file_operations em28xx_v4l_fops = { .compat_ioctl = v4l_compat_ioctl32, }; +static const struct file_operations radio_fops = { + .owner = THIS_MODULE, + .open = em28xx_v4l2_open, + .release = em28xx_v4l2_close, + .ioctl = video_ioctl2, + .compat_ioctl = v4l_compat_ioctl32, + .llseek = no_llseek, +}; + static const struct video_device em28xx_video_template = { .fops = &em28xx_v4l_fops, .release = video_device_release, @@ -1595,6 +1734,25 @@ static const struct video_device em28xx_video_template = { .current_norm = V4L2_STD_PAL, }; +static struct video_device em28xx_radio_template = { + .name = "em28xx-radio", + .type = VID_TYPE_TUNER, + .fops = &radio_fops, + .minor = -1, + .vidioc_querycap = radio_querycap, + .vidioc_g_tuner = radio_g_tuner, + .vidioc_enum_input = radio_enum_input, + .vidioc_g_audio = radio_g_audio, + .vidioc_s_tuner = radio_s_tuner, + .vidioc_s_audio = radio_s_audio, + .vidioc_s_input = radio_s_input, + .vidioc_queryctrl = radio_queryctrl, + .vidioc_g_ctrl = vidioc_g_ctrl, + .vidioc_s_ctrl = vidioc_s_ctrl, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_s_frequency = vidioc_s_frequency, +}; + /******************************** usb interface *****************************************/ @@ -1637,6 +1795,29 @@ void em28xx_unregister_extension(struct em28xx_ops *ops) } EXPORT_SYMBOL(em28xx_unregister_extension); +struct video_device *em28xx_vdev_init(struct em28xx *dev, + const struct video_device *template, + const int type, + const char *type_name) +{ + struct video_device *vfd; + + vfd = video_device_alloc(); + if (NULL == vfd) + return NULL; + *vfd = *template; + vfd->minor = -1; + vfd->dev = &dev->udev->dev; + vfd->release = video_device_release; + vfd->type = type; + + snprintf(vfd->name, sizeof(vfd->name), "%s %s", + dev->name, type_name); + + return vfd; +} + + /* * em28xx_init_dev() * allocates and inits the device structs, registers i2c bus and v4l device @@ -1710,40 +1891,55 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, errCode = em28xx_config(dev); + list_add_tail(&dev->devlist, &em28xx_devlist); + /* allocate and fill video video_device struct */ - dev->vdev = video_device_alloc(); + dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, + VID_TYPE_CAPTURE, "video"); if (NULL == dev->vdev) { em28xx_errdev("cannot allocate video_device.\n"); - em28xx_devused&=~(1<devno); - kfree(dev); - return -ENOMEM; + goto fail_unreg; } - memcpy(dev->vdev, &em28xx_video_template, - sizeof(em28xx_video_template)); - dev->vdev->type = VID_TYPE_CAPTURE; if (dev->has_tuner) dev->vdev->type |= VID_TYPE_TUNER; - dev->vdev->dev = &dev->udev->dev; - snprintf(dev->vdev->name, sizeof(dev->vbi_dev->name), - "%s#%d %s", "em28xx", dev->devno, "video"); + + /* register v4l2 video video_device */ + retval = video_register_device(dev->vdev, VFL_TYPE_GRABBER, + video_nr[dev->devno]); + if (retval) { + em28xx_errdev("unable to register video device (error=%i).\n", + retval); + goto fail_unreg; + } /* Allocate and fill vbi video_device struct */ - dev->vbi_dev = video_device_alloc(); - if (NULL == dev->vbi_dev) { - em28xx_errdev("cannot allocate video_device.\n"); - kfree(dev->vdev); - em28xx_devused&=~(1<devno); - kfree(dev); - return -ENOMEM; + dev->vbi_dev = em28xx_vdev_init(dev, &em28xx_video_template, + VFL_TYPE_VBI, "vbi"); + /* register v4l2 vbi video_device */ + if (video_register_device(dev->vbi_dev, VFL_TYPE_VBI, + vbi_nr[dev->devno]) < 0) { + em28xx_errdev("unable to register vbi device\n"); + retval = -ENODEV; + goto fail_unreg; + } + + if (em28xx_boards[dev->model].radio.type == EM28XX_RADIO) { + dev->radio_dev = em28xx_vdev_init(dev, &em28xx_radio_template, + VFL_TYPE_RADIO, "radio"); + if (NULL == dev->radio_dev) { + em28xx_errdev("cannot allocate video_device.\n"); + goto fail_unreg; + } + retval = video_register_device(dev->radio_dev, VFL_TYPE_RADIO, + radio_nr[dev->devno]); + if (retval < 0) { + em28xx_errdev("can't register radio device\n"); + goto fail_unreg; + } + em28xx_info("Registered radio device as /dev/radio%d\n", + dev->radio_dev->minor & 0x1f); } - memcpy(dev->vbi_dev, &em28xx_video_template, - sizeof(em28xx_video_template)); - dev->vbi_dev->type = VFL_TYPE_VBI; - dev->vbi_dev->dev = &dev->udev->dev; - snprintf(dev->vbi_dev->name, sizeof(dev->vbi_dev->name), - "%s#%d %s", "em28xx", dev->devno, "vbi"); - list_add_tail(&dev->devlist,&em28xx_devlist); if (dev->has_msp34xx) { /* Send a reset to other chips via gpio */ @@ -1755,32 +1951,6 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, video_mux(dev, 0); - /* register v4l2 video video_device */ - if ((retval = video_register_device(dev->vdev, VFL_TYPE_GRABBER, - video_nr[dev->devno]))) { - em28xx_errdev("unable to register video device (error=%i).\n", - retval); - mutex_unlock(&dev->lock); - list_del(&dev->devlist); - video_device_release(dev->vdev); - em28xx_devused&=~(1<devno); - kfree(dev); - return -ENODEV; - } - - /* register v4l2 vbi video_device */ - if (video_register_device(dev->vbi_dev, VFL_TYPE_VBI, - vbi_nr[dev->devno]) < 0) { - printk("unable to register vbi device\n"); - mutex_unlock(&dev->lock); - list_del(&dev->devlist); - video_device_release(dev->vbi_dev); - video_device_release(dev->vdev); - em28xx_devused&=~(1<devno); - kfree(dev); - return -ENODEV; - } - em28xx_info("V4L2 device registered as /dev/video%d and /dev/vbi%d\n", dev->vdev->minor-MINOR_VFL_TYPE_GRABBER_MIN, dev->vbi_dev->minor-MINOR_VFL_TYPE_VBI_MIN); @@ -1795,6 +1965,12 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, mutex_unlock(&em28xx_extension_devlist_lock); return 0; + +fail_unreg: + em28xx_release_resources(dev); + mutex_unlock(&dev->lock); + kfree(dev); + return retval; } #if defined(CONFIG_MODULES) && defined(MODULE) diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 2d57330c4537..2ba34e5b4cc2 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -191,6 +191,7 @@ struct em28xx_board { enum em28xx_decoder decoder; struct em28xx_input input[MAX_EM28XX_INPUT]; + struct em28xx_input radio; }; struct em28xx_eeprom { @@ -307,6 +308,7 @@ struct em28xx { struct list_head inqueue, outqueue; wait_queue_head_t open, wait_frame, wait_stream; struct video_device *vbi_dev; + struct video_device *radio_dev; unsigned char eedata[256]; -- cgit v1.2.3-59-g8ed1b From 33f25b42753f464c5927e8b828352333780c14bd Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 29 Dec 2007 21:46:01 -0300 Subject: V4L/DVB (6957): tda18271: fail table lookups if frequency is out of range Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 5 ----- drivers/media/dvb/frontends/tda18271-tables.c | 28 +++++++++++++++++++-------- 2 files changed, 20 insertions(+), 13 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index d5807c98afc1..739ecfe04381 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -502,11 +502,6 @@ static int tda18271_calc_rf_cal(struct dvb_frontend *fe, u32 *freq) if (ret < 0) goto fail; - /* VHF_Low band only */ - if (0 == val) { - ret = -ERANGE; - goto fail; - } regs[R_EB14] = val; fail: return ret; diff --git a/drivers/media/dvb/frontends/tda18271-tables.c b/drivers/media/dvb/frontends/tda18271-tables.c index e10a93bf12c1..f8202c40b046 100644 --- a/drivers/media/dvb/frontends/tda18271-tables.c +++ b/drivers/media/dvb/frontends/tda18271-tables.c @@ -273,6 +273,7 @@ int tda18271_lookup_pll_map(enum tda18271_map_type map_type, struct tda18271_pll_map *map = NULL; unsigned int i = 0; char *map_name; + int ret = 0; switch (map_type) { case MAIN_PLL: @@ -291,12 +292,17 @@ int tda18271_lookup_pll_map(enum tda18271_map_type map_type, if (!map) { tda_warn("%s map is not set!\n", map_name); - return -EINVAL; + ret = -EINVAL; + goto fail; } while ((map[i].lomax * 1000) < *freq) { - if (map[i + 1].lomax == 0) + if (map[i].lomax == 0) { + tda_map("%s: frequency (%d) out of range\n", + map_name, *freq); + ret = -ERANGE; break; + } i++; } *post_div = map[i].pd; @@ -304,8 +310,8 @@ int tda18271_lookup_pll_map(enum tda18271_map_type map_type, tda_map("%s: post div = 0x%02x, div = 0x%02x\n", map_name, *post_div, *div); - - return 0; +fail: + return ret; } int tda18271_lookup_map(enum tda18271_map_type map_type, u32 *freq, u8 *val) @@ -313,6 +319,7 @@ int tda18271_lookup_map(enum tda18271_map_type map_type, u32 *freq, u8 *val) struct tda18271_map *map = NULL; unsigned int i = 0; char *map_name; + int ret = 0; switch (map_type) { case BP_FILTER: @@ -347,19 +354,24 @@ int tda18271_lookup_map(enum tda18271_map_type map_type, u32 *freq, u8 *val) if (!map) { tda_warn("%s map is not set!\n", map_name); - return -EINVAL; + ret = -EINVAL; + goto fail; } while ((map[i].rfmax * 1000) < *freq) { - if (map[i + 1].rfmax == 0) + if (map[i].rfmax == 0) { + tda_map("%s: frequency (%d) out of range\n", + map_name, *freq); + ret = -ERANGE; break; + } i++; } *val = map[i].val; tda_map("%s: 0x%02x\n", map_name, *val); - - return 0; +fail: + return ret; } /* -- cgit v1.2.3-59-g8ed1b From 95af8a26cba55222d6a1beda7970431b4fbbbdd6 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Tue, 1 Jan 2008 18:31:34 -0300 Subject: V4L/DVB (6958): tda18271: clean up function tda18271_set_analog_params make set_analog_params function look consistent with set_params function Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 29 ++++++++++++----------------- 1 file changed, 12 insertions(+), 17 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index 739ecfe04381..98ee6b1ff8a0 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -662,7 +662,6 @@ static int tda18271_set_params(struct dvb_frontend *fe, struct tda18271_priv *priv = fe->tuner_priv; u8 std; u32 bw, sgIF = 0; - u32 freq = params->frequency; priv->mode = TDA18271_DIGITAL; @@ -722,54 +721,50 @@ static int tda18271_set_analog_params(struct dvb_frontend *fe, struct analog_parameters *params) { struct tda18271_priv *priv = fe->tuner_priv; - u8 std; - unsigned int sgIF; char *mode; + u8 std; + u32 sgIF, freq = params->frequency * 62500; priv->mode = TDA18271_ANALOG; /* see table 22 */ if (params->std & V4L2_STD_MN) { std = 0x0d; - sgIF = 92; + sgIF = 5750000; mode = "MN"; } else if (params->std & V4L2_STD_B) { std = 0x0e; - sgIF = 108; + sgIF = 6750000; mode = "B"; } else if (params->std & V4L2_STD_GH) { std = 0x0f; - sgIF = 124; + sgIF = 7750000; mode = "GH"; } else if (params->std & V4L2_STD_PAL_I) { std = 0x0f; - sgIF = 124; + sgIF = 7750000; mode = "I"; } else if (params->std & V4L2_STD_DK) { std = 0x0f; - sgIF = 124; + sgIF = 7750000; mode = "DK"; } else if (params->std & V4L2_STD_SECAM_L) { std = 0x0f; - sgIF = 124; + sgIF = 7750000; mode = "L"; } else if (params->std & V4L2_STD_SECAM_LC) { std = 0x0f; - sgIF = 20; - mode = "LC"; + sgIF = 1250000; + mode = "L'"; } else { std = 0x0f; - sgIF = 124; + sgIF = 7750000; mode = "xx"; } - if (params->mode == V4L2_TUNER_RADIO) - sgIF = 88; /* if frequency is 5.5 MHz */ - tda_dbg("setting tda18271 to system %s\n", mode); - return tda18271_tune(fe, sgIF * 62500, params->frequency * 62500, - 0, std); + return tda18271_tune(fe, sgIF, freq, 0, std); } static int tda18271_release(struct dvb_frontend *fe) -- cgit v1.2.3-59-g8ed1b From dec9ccceef9bfd5f3cccc79e90b09f6c31ed3279 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 2 Jan 2008 01:35:46 -0300 Subject: V4L/DVB (6959): tda18271: add MODULE_VERSION version 0.1 Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index 98ee6b1ff8a0..2c873ae6e8c1 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -866,6 +866,7 @@ EXPORT_SYMBOL_GPL(tda18271_attach); MODULE_DESCRIPTION("NXP TDA18271HD analog / digital tuner driver"); MODULE_AUTHOR("Michael Krufky "); MODULE_LICENSE("GPL"); +MODULE_VERSION("0.1"); /* * Overrides for Emacs so that we follow Linus's tabbing style. -- cgit v1.2.3-59-g8ed1b From 255b5113b4ed683898a24e381155c081f03411f7 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Tue, 1 Jan 2008 22:52:09 -0300 Subject: V4L/DVB (6960): tda18271: add support for NXP TDA18271HD/C2 Tested successfully with QAM256 digital cable. Analog television is limping, needs more work. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 885 +++++++++++++++++++++--- drivers/media/dvb/frontends/tda18271-priv.h | 72 +- drivers/media/dvb/frontends/tda18271-tables.c | 932 +++++++++++++++++++++++++- drivers/media/video/tda8290.c | 2 +- 4 files changed, 1779 insertions(+), 112 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index 2c873ae6e8c1..4b53baf12efc 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -71,7 +71,7 @@ static int tda18271_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) /*---------------------------------------------------------------------*/ -static void tda18271_dump_regs(struct dvb_frontend *fe) +static void tda18271_dump_regs(struct dvb_frontend *fe, int extended) { struct tda18271_priv *priv = fe->tuner_priv; unsigned char *regs = priv->tda18271_regs; @@ -93,6 +93,37 @@ static void tda18271_dump_regs(struct dvb_frontend *fe) tda_reg("MAIN_DIV_BYTE_1 = 0x%02x\n", 0xff & regs[R_MD1]); tda_reg("MAIN_DIV_BYTE_2 = 0x%02x\n", 0xff & regs[R_MD2]); tda_reg("MAIN_DIV_BYTE_3 = 0x%02x\n", 0xff & regs[R_MD3]); + + /* only dump extended regs if DBG_ADV is set */ + if (!(tda18271_debug & DBG_ADV)) + return; + + /* W indicates write-only registers. + * Register dump for write-only registers shows last value written. */ + + tda_reg("EXTENDED_BYTE_1 = 0x%02x\n", 0xff & regs[R_EB1]); + tda_reg("EXTENDED_BYTE_2 = 0x%02x\n", 0xff & regs[R_EB2]); + tda_reg("EXTENDED_BYTE_3 = 0x%02x\n", 0xff & regs[R_EB3]); + tda_reg("EXTENDED_BYTE_4 = 0x%02x\n", 0xff & regs[R_EB4]); + tda_reg("EXTENDED_BYTE_5 = 0x%02x\n", 0xff & regs[R_EB5]); + tda_reg("EXTENDED_BYTE_6 = 0x%02x\n", 0xff & regs[R_EB6]); + tda_reg("EXTENDED_BYTE_7 = 0x%02x\n", 0xff & regs[R_EB7]); + tda_reg("EXTENDED_BYTE_8 = 0x%02x\n", 0xff & regs[R_EB8]); + tda_reg("EXTENDED_BYTE_9 W = 0x%02x\n", 0xff & regs[R_EB9]); + tda_reg("EXTENDED_BYTE_10 = 0x%02x\n", 0xff & regs[R_EB10]); + tda_reg("EXTENDED_BYTE_11 = 0x%02x\n", 0xff & regs[R_EB11]); + tda_reg("EXTENDED_BYTE_12 = 0x%02x\n", 0xff & regs[R_EB12]); + tda_reg("EXTENDED_BYTE_13 = 0x%02x\n", 0xff & regs[R_EB13]); + tda_reg("EXTENDED_BYTE_14 = 0x%02x\n", 0xff & regs[R_EB14]); + tda_reg("EXTENDED_BYTE_15 = 0x%02x\n", 0xff & regs[R_EB15]); + tda_reg("EXTENDED_BYTE_16 W = 0x%02x\n", 0xff & regs[R_EB16]); + tda_reg("EXTENDED_BYTE_17 W = 0x%02x\n", 0xff & regs[R_EB17]); + tda_reg("EXTENDED_BYTE_18 = 0x%02x\n", 0xff & regs[R_EB18]); + tda_reg("EXTENDED_BYTE_19 W = 0x%02x\n", 0xff & regs[R_EB19]); + tda_reg("EXTENDED_BYTE_20 W = 0x%02x\n", 0xff & regs[R_EB20]); + tda_reg("EXTENDED_BYTE_21 = 0x%02x\n", 0xff & regs[R_EB21]); + tda_reg("EXTENDED_BYTE_22 = 0x%02x\n", 0xff & regs[R_EB22]); + tda_reg("EXTENDED_BYTE_23 = 0x%02x\n", 0xff & regs[R_EB23]); } static void tda18271_read_regs(struct dvb_frontend *fe) @@ -119,7 +150,45 @@ static void tda18271_read_regs(struct dvb_frontend *fe) tda_err("ERROR: i2c_transfer returned: %d\n", ret); if (tda18271_debug & DBG_REG) - tda18271_dump_regs(fe); + tda18271_dump_regs(fe, 0); +} + +static void tda18271_read_extended(struct dvb_frontend *fe) +{ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + unsigned char regdump[TDA18271_NUM_REGS]; + unsigned char buf = 0x00; + int ret, i; + struct i2c_msg msg[] = { + { .addr = priv->i2c_addr, .flags = 0, + .buf = &buf, .len = 1 }, + { .addr = priv->i2c_addr, .flags = I2C_M_RD, + .buf = regdump, .len = TDA18271_NUM_REGS } + }; + + tda18271_i2c_gate_ctrl(fe, 1); + + /* read all registers */ + ret = i2c_transfer(priv->i2c_adap, msg, 2); + + tda18271_i2c_gate_ctrl(fe, 0); + + if (ret != 2) + tda_err("ERROR: i2c_transfer returned: %d\n", ret); + + for (i = 0; i <= TDA18271_NUM_REGS; i++) { + /* don't update write-only registers */ + if ((i != R_EB9) && + (i != R_EB16) && + (i != R_EB17) && + (i != R_EB19) && + (i != R_EB20)) + regs[i] = regdump[i]; + } + + if (tda18271_debug & DBG_REG) + tda18271_dump_regs(fe, 1); } static void tda18271_write_regs(struct dvb_frontend *fe, int idx, int len) @@ -160,7 +229,15 @@ static int tda18271_init_regs(struct dvb_frontend *fe) i2c_adapter_id(priv->i2c_adap), priv->i2c_addr); /* initialize registers */ - regs[R_ID] = 0x83; + switch (priv->id) { + case TDA18271HDC1: + regs[R_ID] = 0x83; + break; + case TDA18271HDC2: + regs[R_ID] = 0x84; + break; + }; + regs[R_TM] = 0x08; regs[R_PL] = 0x80; regs[R_EP1] = 0xc6; @@ -176,7 +253,16 @@ static int tda18271_init_regs(struct dvb_frontend *fe) regs[R_MD1] = 0x00; regs[R_MD2] = 0x00; regs[R_MD3] = 0x00; - regs[R_EB1] = 0xff; + + switch (priv->id) { + case TDA18271HDC1: + regs[R_EB1] = 0xff; + break; + case TDA18271HDC2: + regs[R_EB1] = 0xfc; + break; + }; + regs[R_EB2] = 0x01; regs[R_EB3] = 0x84; regs[R_EB4] = 0x41; @@ -187,21 +273,49 @@ static int tda18271_init_regs(struct dvb_frontend *fe) regs[R_EB9] = 0x00; regs[R_EB10] = 0x00; regs[R_EB11] = 0x96; - regs[R_EB12] = 0x0f; + + switch (priv->id) { + case TDA18271HDC1: + regs[R_EB12] = 0x0f; + break; + case TDA18271HDC2: + regs[R_EB12] = 0x33; + break; + }; + regs[R_EB13] = 0xc1; regs[R_EB14] = 0x00; regs[R_EB15] = 0x8f; regs[R_EB16] = 0x00; regs[R_EB17] = 0x00; - regs[R_EB18] = 0x00; + + switch (priv->id) { + case TDA18271HDC1: + regs[R_EB18] = 0x00; + break; + case TDA18271HDC2: + regs[R_EB18] = 0x8c; + break; + }; + regs[R_EB19] = 0x00; regs[R_EB20] = 0x20; - regs[R_EB21] = 0x33; + + switch (priv->id) { + case TDA18271HDC1: + regs[R_EB21] = 0x33; + break; + case TDA18271HDC2: + regs[R_EB21] = 0xb3; + break; + }; + regs[R_EB22] = 0x48; regs[R_EB23] = 0xb0; tda18271_write_regs(fe, 0x00, TDA18271_NUM_REGS); - /* setup AGC1 & AGC2 */ + + /* setup agc1 gain */ regs[R_EB17] = 0x00; tda18271_write_regs(fe, R_EB17, 1); regs[R_EB17] = 0x03; @@ -211,14 +325,17 @@ static int tda18271_init_regs(struct dvb_frontend *fe) regs[R_EB17] = 0x4c; tda18271_write_regs(fe, R_EB17, 1); - regs[R_EB20] = 0xa0; - tda18271_write_regs(fe, R_EB20, 1); - regs[R_EB20] = 0xa7; - tda18271_write_regs(fe, R_EB20, 1); - regs[R_EB20] = 0xe7; - tda18271_write_regs(fe, R_EB20, 1); - regs[R_EB20] = 0xec; - tda18271_write_regs(fe, R_EB20, 1); + /* setup agc2 gain */ + if ((priv->id) == TDA18271HDC1) { + regs[R_EB20] = 0xa0; + tda18271_write_regs(fe, R_EB20, 1); + regs[R_EB20] = 0xa7; + tda18271_write_regs(fe, R_EB20, 1); + regs[R_EB20] = 0xe7; + tda18271_write_regs(fe, R_EB20, 1); + regs[R_EB20] = 0xec; + tda18271_write_regs(fe, R_EB20, 1); + } /* image rejection calibration */ @@ -235,103 +352,102 @@ static int tda18271_init_regs(struct dvb_frontend *fe) regs[R_MD2] = 0x08; regs[R_MD3] = 0x00; - tda18271_write_regs(fe, R_EP3, 11); + switch (priv->id) { + case TDA18271HDC1: + tda18271_write_regs(fe, R_EP3, 11); + break; + case TDA18271HDC2: + tda18271_write_regs(fe, R_EP3, 12); + break; + }; + + if ((priv->id) == TDA18271HDC2) { + /* main pll cp source on */ + regs[R_EB4] = 0x61; + tda18271_write_regs(fe, R_EB4, 1); + msleep(1); + + /* main pll cp source off */ + regs[R_EB4] = 0x41; + tda18271_write_regs(fe, R_EB4, 1); + } + msleep(5); /* pll locking */ - regs[R_EP1] = 0xc6; + /* launch detector */ tda18271_write_regs(fe, R_EP1, 1); msleep(5); /* wanted low measurement */ - regs[R_EP3] = 0x1f; - regs[R_EP4] = 0x66; regs[R_EP5] = 0x85; regs[R_CPD] = 0xcb; regs[R_CD1] = 0x66; regs[R_CD2] = 0x70; - regs[R_CD3] = 0x00; tda18271_write_regs(fe, R_EP3, 7); msleep(5); /* pll locking */ - regs[R_EP2] = 0xdf; + /* launch optimization algorithm */ tda18271_write_regs(fe, R_EP2, 1); msleep(30); /* image low optimization completion */ /* mid-band */ - regs[R_EP3] = 0x1f; - regs[R_EP4] = 0x66; regs[R_EP5] = 0x82; regs[R_CPD] = 0xa8; - regs[R_CD1] = 0x66; regs[R_CD2] = 0x00; - regs[R_CD3] = 0x00; regs[R_MPD] = 0xa9; regs[R_MD1] = 0x73; regs[R_MD2] = 0x1a; - regs[R_MD3] = 0x00; tda18271_write_regs(fe, R_EP3, 11); msleep(5); /* pll locking */ - regs[R_EP1] = 0xc6; tda18271_write_regs(fe, R_EP1, 1); msleep(5); /* wanted mid measurement */ - regs[R_EP3] = 0x1f; - regs[R_EP4] = 0x66; regs[R_EP5] = 0x86; regs[R_CPD] = 0xa8; regs[R_CD1] = 0x66; regs[R_CD2] = 0xa0; - regs[R_CD3] = 0x00; tda18271_write_regs(fe, R_EP3, 7); msleep(5); /* pll locking */ - regs[R_EP2] = 0xdf; + /* launch optimization algorithm */ tda18271_write_regs(fe, R_EP2, 1); msleep(30); /* image mid optimization completion */ /* high-band */ - regs[R_EP3] = 0x1f; - regs[R_EP4] = 0x66; regs[R_EP5] = 0x83; regs[R_CPD] = 0x98; regs[R_CD1] = 0x65; regs[R_CD2] = 0x00; - regs[R_CD3] = 0x00; regs[R_MPD] = 0x99; regs[R_MD1] = 0x71; regs[R_MD2] = 0xcd; - regs[R_MD3] = 0x00; tda18271_write_regs(fe, R_EP3, 11); msleep(5); /* pll locking */ - regs[R_EP1] = 0xc6; + /* launch detector */ tda18271_write_regs(fe, R_EP1, 1); msleep(5); /* wanted high measurement */ - regs[R_EP3] = 0x1f; - regs[R_EP4] = 0x66; regs[R_EP5] = 0x87; - regs[R_CPD] = 0x98; regs[R_CD1] = 0x65; regs[R_CD2] = 0x50; - regs[R_CD3] = 0x00; tda18271_write_regs(fe, R_EP3, 7); msleep(5); /* pll locking */ - regs[R_EP2] = 0xdf; - + /* launch optimization algorithm */ tda18271_write_regs(fe, R_EP2, 1); msleep(30); /* image high optimization completion */ + /* return to normal mode */ regs[R_EP4] = 0x64; tda18271_write_regs(fe, R_EP4, 1); - regs[R_EP1] = 0xc6; + /* synchronize */ tda18271_write_regs(fe, R_EP1, 1); return 0; @@ -359,7 +475,7 @@ static int tda18271_calc_main_pll(struct dvb_frontend *fe, u32 freq) u8 d, pd; u32 div; - int ret = tda18271_lookup_pll_map(MAIN_PLL, &freq, &pd, &d); + int ret = tda18271_lookup_pll_map(fe, MAIN_PLL, &freq, &pd, &d); if (ret < 0) goto fail; @@ -391,7 +507,7 @@ static int tda18271_calc_cal_pll(struct dvb_frontend *fe, u32 freq) u8 d, pd; u32 div; - int ret = tda18271_lookup_pll_map(CAL_PLL, &freq, &pd, &d); + int ret = tda18271_lookup_pll_map(fe, CAL_PLL, &freq, &pd, &d); if (ret < 0) goto fail; @@ -413,7 +529,7 @@ static int tda18271_calc_bp_filter(struct dvb_frontend *fe, u32 *freq) unsigned char *regs = priv->tda18271_regs; u8 val; - int ret = tda18271_lookup_map(BP_FILTER, freq, &val); + int ret = tda18271_lookup_map(fe, BP_FILTER, freq, &val); if (ret < 0) goto fail; @@ -430,7 +546,7 @@ static int tda18271_calc_km(struct dvb_frontend *fe, u32 *freq) unsigned char *regs = priv->tda18271_regs; u8 val; - int ret = tda18271_lookup_map(RF_CAL_KMCO, freq, &val); + int ret = tda18271_lookup_map(fe, RF_CAL_KMCO, freq, &val); if (ret < 0) goto fail; @@ -447,7 +563,7 @@ static int tda18271_calc_rf_band(struct dvb_frontend *fe, u32 *freq) unsigned char *regs = priv->tda18271_regs; u8 val; - int ret = tda18271_lookup_map(RF_BAND, freq, &val); + int ret = tda18271_lookup_map(fe, RF_BAND, freq, &val); if (ret < 0) goto fail; @@ -464,7 +580,7 @@ static int tda18271_calc_gain_taper(struct dvb_frontend *fe, u32 *freq) unsigned char *regs = priv->tda18271_regs; u8 val; - int ret = tda18271_lookup_map(GAIN_TAPER, freq, &val); + int ret = tda18271_lookup_map(fe, GAIN_TAPER, freq, &val); if (ret < 0) goto fail; @@ -481,7 +597,7 @@ static int tda18271_calc_ir_measure(struct dvb_frontend *fe, u32 *freq) unsigned char *regs = priv->tda18271_regs; u8 val; - int ret = tda18271_lookup_map(IR_MEASURE, freq, &val); + int ret = tda18271_lookup_map(fe, IR_MEASURE, freq, &val); if (ret < 0) goto fail; @@ -498,7 +614,7 @@ static int tda18271_calc_rf_cal(struct dvb_frontend *fe, u32 *freq) unsigned char *regs = priv->tda18271_regs; u8 val; - int ret = tda18271_lookup_map(RF_CAL, freq, &val); + int ret = tda18271_lookup_map(fe, RF_CAL, freq, &val); if (ret < 0) goto fail; @@ -507,8 +623,581 @@ fail: return ret; } -static int tda18271_tune(struct dvb_frontend *fe, - u32 ifc, u32 freq, u32 bw, u8 std) +/* ------------------------------------------------------------------ */ + +static int tda18271_channel_configuration(struct dvb_frontend *fe, + u32 ifc, u32 freq, u32 bw, u8 std) +{ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + u32 N; + + /* update TV broadcast parameters */ + + /* set standard */ + regs[R_EP3] &= ~0x1f; /* clear std bits */ + regs[R_EP3] |= std; + + /* set cal mode to normal */ + regs[R_EP4] &= ~0x03; + + /* update IF output level & IF notch frequency */ + regs[R_EP4] &= ~0x1c; /* clear if level bits */ + + switch (priv->mode) { + case TDA18271_ANALOG: + regs[R_MPD] &= ~0x80; /* IF notch = 0 */ + break; + case TDA18271_DIGITAL: + regs[R_EP4] |= 0x04; /* IF level = 1 */ + regs[R_MPD] |= 0x80; /* IF notch = 1 */ + break; + } + regs[R_EP4] &= ~0x80; /* FM_RFn: turn this bit on only for fm radio */ + + /* update RF_TOP / IF_TOP */ + switch (priv->mode) { + case TDA18271_ANALOG: + regs[R_EB22] = 0x2c; + break; + case TDA18271_DIGITAL: + regs[R_EB22] = 0x37; + break; + } + tda18271_write_regs(fe, R_EB22, 1); + + /* --------------------------------------------------------------- */ + + /* disable Power Level Indicator */ + regs[R_EP1] |= 0x40; + + /* frequency dependent parameters */ + + tda18271_calc_ir_measure(fe, &freq); + + tda18271_calc_bp_filter(fe, &freq); + + tda18271_calc_rf_band(fe, &freq); + + tda18271_calc_gain_taper(fe, &freq); + + /* --------------------------------------------------------------- */ + + /* dual tuner and agc1 extra configuration */ + + /* main vco when Master, cal vco when slave */ + regs[R_EB1] |= 0x04; /* FIXME: assumes master */ + + /* agc1 always active */ + regs[R_EB1] &= ~0x02; + + /* agc1 has priority on agc2 */ + regs[R_EB1] &= ~0x01; + + tda18271_write_regs(fe, R_EB1, 1); + + /* --------------------------------------------------------------- */ + + N = freq + ifc; + + /* FIXME: assumes master */ + tda18271_calc_main_pll(fe, N); + tda18271_write_regs(fe, R_MPD, 4); + + tda18271_write_regs(fe, R_TM, 7); + + /* main pll charge pump source */ + regs[R_EB4] |= 0x20; + tda18271_write_regs(fe, R_EB4, 1); + + msleep(1); + + /* normal operation for the main pll */ + regs[R_EB4] &= ~0x20; + tda18271_write_regs(fe, R_EB4, 1); + + msleep(5); + + return 0; +} + +static int tda18271_read_thermometer(struct dvb_frontend *fe) +{ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + int tm; + + /* switch thermometer on */ + regs[R_TM] |= 0x10; + tda18271_write_regs(fe, R_TM, 1); + + /* read thermometer info */ + tda18271_read_regs(fe); + + if ((((regs[R_TM] & 0x0f) == 0x00) && ((regs[R_TM] & 0x20) == 0x20)) || + (((regs[R_TM] & 0x0f) == 0x08) && ((regs[R_TM] & 0x20) == 0x00))) { + + if ((regs[R_TM] & 0x20) == 0x20) + regs[R_TM] &= ~0x20; + else + regs[R_TM] |= 0x20; + + tda18271_write_regs(fe, R_TM, 1); + + msleep(10); /* temperature sensing */ + + /* read thermometer info */ + tda18271_read_regs(fe); + } + + tm = tda18271_lookup_thermometer(fe); + + /* switch thermometer off */ + regs[R_TM] &= ~0x10; + tda18271_write_regs(fe, R_TM, 1); + + /* set CAL mode to normal */ + regs[R_EP4] &= ~0x03; + tda18271_write_regs(fe, R_EP4, 1); + + return tm; +} + +static int tda18271_rf_tracking_filters_correction(struct dvb_frontend *fe, + u32 freq, int tm_rfcal) +{ + struct tda18271_priv *priv = fe->tuner_priv; + struct tda18271_rf_tracking_filter_cal *map = priv->rf_cal_state; + unsigned char *regs = priv->tda18271_regs; + int tm_current, rfcal_comp, approx, i; + u8 dc_over_dt, rf_tab; + + /* power up */ + regs[R_EP3] &= ~0xe0; /* sm = 0, sm_lt = 0, sm_xt = 0 */ + tda18271_write_regs(fe, R_EP3, 1); + + /* read die current temperature */ + tm_current = tda18271_read_thermometer(fe); + + /* frequency dependent parameters */ + + tda18271_calc_rf_cal(fe, &freq); + rf_tab = regs[R_EB14]; + + i = tda18271_lookup_rf_band(fe, &freq, NULL); + if (i < 0) + return -EINVAL; + + if ((0 == map[i].rf3) || (freq / 1000 < map[i].rf2)) { + approx = map[i].rf_a1 * + (freq / 1000 - map[i].rf1) + map[i].rf_b1 + rf_tab; + } else { + approx = map[i].rf_a2 * + (freq / 1000 - map[i].rf2) + map[i].rf_b2 + rf_tab; + } + + if (approx < 0) + approx = 0; + if (approx > 255) + approx = 255; + + tda18271_lookup_map(fe, RF_CAL_DC_OVER_DT, &freq, &dc_over_dt); + + /* calculate temperature compensation */ + rfcal_comp = dc_over_dt * (tm_current - tm_rfcal); + + regs[R_EB14] = approx + rfcal_comp; + tda18271_write_regs(fe, R_EB14, 1); + + return 0; +} + +static int tda18271_por(struct dvb_frontend *fe) +{ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + + /* power up detector 1 */ + regs[R_EB12] &= ~0x20; + tda18271_write_regs(fe, R_EB12, 1); + + regs[R_EB18] &= ~0x80; /* turn agc1 loop on */ + regs[R_EB18] &= ~0x03; /* set agc1_gain to 6 dB */ + tda18271_write_regs(fe, R_EB18, 1); + + regs[R_EB21] |= 0x03; /* set agc2_gain to -6 dB */ + + /* POR mode */ + regs[R_EP3] &= ~0xe0; /* clear sm, sm_lt, sm_xt */ + regs[R_EP3] |= 0x80; /* sm = 1, sm_lt = 0, sm_xt = 0 */ + tda18271_write_regs(fe, R_EP3, 1); + + /* disable 1.5 MHz low pass filter */ + regs[R_EB23] &= ~0x04; /* forcelp_fc2_en = 0 */ + regs[R_EB23] &= ~0x02; /* XXX: lp_fc[2] = 0 */ + tda18271_write_regs(fe, R_EB21, 3); + + return 0; +} + +static int tda18271_calibrate_rf(struct dvb_frontend *fe, u32 freq) +{ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + u32 N; + + /* set CAL mode to normal */ + regs[R_EP4] &= ~0x03; + tda18271_write_regs(fe, R_EP4, 1); + + /* switch off agc1 */ + regs[R_EP3] |= 0x40; /* sm_lt = 1 */ + + regs[R_EB18] |= 0x03; /* set agc1_gain to 15 dB */ + tda18271_write_regs(fe, R_EB18, 1); + + /* frequency dependent parameters */ + + tda18271_calc_bp_filter(fe, &freq); + tda18271_calc_gain_taper(fe, &freq); + tda18271_calc_rf_band(fe, &freq); + tda18271_calc_km(fe, &freq); + + tda18271_write_regs(fe, R_EP1, 3); + tda18271_write_regs(fe, R_EB13, 1); + + /* main pll charge pump source */ + regs[R_EB4] |= 0x20; + tda18271_write_regs(fe, R_EB4, 1); + + /* cal pll charge pump source */ + regs[R_EB7] |= 0x20; + tda18271_write_regs(fe, R_EB7, 1); + + /* force dcdc converter to 0 V */ + regs[R_EB14] = 0x00; + tda18271_write_regs(fe, R_EB14, 1); + + /* disable plls lock */ + regs[R_EB20] &= ~0x20; + tda18271_write_regs(fe, R_EB20, 1); + + /* set CAL mode to RF tracking filter calibration */ + regs[R_EP4] |= 0x03; + tda18271_write_regs(fe, R_EP4, 2); + + /* --------------------------------------------------------------- */ + + /* set the internal calibration signal */ + N = freq; + + tda18271_calc_main_pll(fe, N); + tda18271_write_regs(fe, R_MPD, 4); + + /* downconvert internal calibration */ + N += 1000000; + + tda18271_calc_main_pll(fe, N); + tda18271_write_regs(fe, R_MPD, 4); + + msleep(5); + + tda18271_write_regs(fe, R_EP2, 1); + tda18271_write_regs(fe, R_EP1, 1); + tda18271_write_regs(fe, R_EP2, 1); + tda18271_write_regs(fe, R_EP1, 1); + + /* --------------------------------------------------------------- */ + + /* normal operation for the main pll */ + regs[R_EB4] &= ~0x20; + tda18271_write_regs(fe, R_EB4, 1); + + /* normal operation for the cal pll */ + regs[R_EB7] &= ~0x20; + tda18271_write_regs(fe, R_EB7, 1); + + msleep(5); /* plls locking */ + + /* launch the rf tracking filters calibration */ + regs[R_EB20] |= 0x20; + tda18271_write_regs(fe, R_EB20, 1); + + msleep(60); /* calibration */ + + /* --------------------------------------------------------------- */ + + /* set CAL mode to normal */ + regs[R_EP4] &= ~0x03; + + /* switch on agc1 */ + regs[R_EP3] &= ~0x40; /* sm_lt = 0 */ + + regs[R_EB18] &= ~0x03; /* set agc1_gain to 6 dB */ + tda18271_write_regs(fe, R_EB18, 1); + + tda18271_write_regs(fe, R_EP3, 2); + + /* synchronization */ + tda18271_write_regs(fe, R_EP1, 1); + + /* get calibration result */ + tda18271_read_extended(fe); + + return regs[R_EB14]; +} + +static int tda18271_powerscan(struct dvb_frontend *fe, + u32 *freq_in, u32 *freq_out) +{ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + int sgn, bcal, count, wait; + u8 cid_target; + u16 count_limit; + u32 freq; + + freq = *freq_in; + + tda18271_calc_rf_band(fe, &freq); + tda18271_calc_rf_cal(fe, &freq); + tda18271_calc_gain_taper(fe, &freq); + tda18271_lookup_cid_target(fe, &freq, &cid_target, &count_limit); + + tda18271_write_regs(fe, R_EP2, 1); + tda18271_write_regs(fe, R_EB14, 1); + + /* downconvert frequency */ + freq += 1000000; + + tda18271_calc_main_pll(fe, freq); + tda18271_write_regs(fe, R_MPD, 4); + + msleep(5); /* pll locking */ + + /* detection mode */ + regs[R_EP4] &= ~0x03; + regs[R_EP4] |= 0x01; + tda18271_write_regs(fe, R_EP4, 1); + + /* launch power detection measurement */ + tda18271_write_regs(fe, R_EP2, 1); + + /* read power detection info, stored in EB10 */ + tda18271_read_extended(fe); + + /* algorithm initialization */ + sgn = 1; + *freq_out = *freq_in; + bcal = 0; + count = 0; + wait = false; + + while ((regs[R_EB10] & 0x3f) < cid_target) { + /* downconvert updated freq to 1 MHz */ + freq = *freq_in + (sgn * count) + 1000000; + + tda18271_calc_main_pll(fe, freq); + tda18271_write_regs(fe, R_MPD, 4); + + if (wait) { + msleep(5); /* pll locking */ + wait = false; + } else + udelay(100); /* pll locking */ + + /* launch power detection measurement */ + tda18271_write_regs(fe, R_EP2, 1); + + /* read power detection info, stored in EB10 */ + tda18271_read_extended(fe); + + count += 200; + + if (count < count_limit) + continue; + + if (sgn <= 0) + break; + + sgn = -1 * sgn; + count = 200; + wait = true; + } + + if ((regs[R_EB10] & 0x3f) >= cid_target) { + bcal = 1; + *freq_out = freq - 1000000; + } else + bcal = 0; + + tda_dbg("bcal = %d, freq_in = %d, freq_out = %d (freq = %d)\n", + bcal, *freq_in, *freq_out, freq); + + return bcal; +} + +static int tda18271_powerscan_init(struct dvb_frontend *fe) +{ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + + /* set standard to digital */ + regs[R_EP3] &= ~0x1f; /* clear std bits */ + regs[R_EP3] |= 0x12; + + /* set cal mode to normal */ + regs[R_EP4] &= ~0x03; + + /* update IF output level & IF notch frequency */ + regs[R_EP4] &= ~0x1c; /* clear if level bits */ + + tda18271_write_regs(fe, R_EP3, 2); + + regs[R_EB18] &= ~0x03; /* set agc1_gain to 6 dB */ + tda18271_write_regs(fe, R_EB18, 1); + + regs[R_EB21] &= ~0x03; /* set agc2_gain to -15 dB */ + + /* 1.5 MHz low pass filter */ + regs[R_EB23] |= 0x04; /* forcelp_fc2_en = 1 */ + regs[R_EB23] |= 0x02; /* lp_fc[2] = 1 */ + + tda18271_write_regs(fe, R_EB21, 3); + + return 0; +} + +static int tda18271_rf_tracking_filters_init(struct dvb_frontend *fe, u32 freq) +{ + struct tda18271_priv *priv = fe->tuner_priv; + struct tda18271_rf_tracking_filter_cal *map = priv->rf_cal_state; + unsigned char *regs = priv->tda18271_regs; + int bcal, rf, i; +#define RF1 0 +#define RF2 1 +#define RF3 2 + u32 rf_default[3]; + u32 rf_freq[3]; + u8 prog_cal[3]; + u8 prog_tab[3]; + + i = tda18271_lookup_rf_band(fe, &freq, NULL); + + if (i < 0) + return i; + + rf_default[RF1] = 1000 * map[i].rf1_def; + rf_default[RF2] = 1000 * map[i].rf2_def; + rf_default[RF3] = 1000 * map[i].rf3_def; + + for (rf = RF1; rf <= RF3; rf++) { + if (0 == rf_default[rf]) + return 0; + tda_dbg("freq = %d, rf = %d\n", freq, rf); + + /* look for optimized calibration frequency */ + bcal = tda18271_powerscan(fe, &rf_default[rf], &rf_freq[rf]); + + tda18271_calc_rf_cal(fe, &rf_freq[rf]); + prog_tab[rf] = regs[R_EB14]; + + if (1 == bcal) + prog_cal[rf] = tda18271_calibrate_rf(fe, rf_freq[rf]); + else + prog_cal[rf] = prog_tab[rf]; + + switch (rf) { + case RF1: + map[i].rf_a1 = 0; + map[i].rf_b1 = prog_cal[RF1] - prog_tab[RF1]; + map[i].rf1 = rf_freq[RF1] / 1000; + break; + case RF2: + map[i].rf_a1 = (prog_cal[RF2] - prog_tab[RF2] - + prog_cal[RF1] + prog_tab[RF1]) / + ((rf_freq[RF2] - rf_freq[RF1]) / 1000); + map[i].rf2 = rf_freq[RF2] / 1000; + break; + case RF3: + map[i].rf_a2 = (prog_cal[RF3] - prog_tab[RF3] - + prog_cal[RF2] + prog_tab[RF2]) / + ((rf_freq[RF3] - rf_freq[RF2]) / 1000); + map[i].rf_b2 = prog_cal[RF2] - prog_tab[RF2]; + map[i].rf3 = rf_freq[RF3] / 1000; + break; + default: + BUG(); + } + } + + return 0; +} + +static int tda18271_calc_rf_filter_curve(struct dvb_frontend *fe, + int *tm_rfcal) +{ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned int i; + + tda_info("tda18271: performing RF tracking filter calibration\n"); + + /* wait for die temperature stabilization */ + msleep(200); + + tda18271_powerscan_init(fe); + + /* rf band calibration */ + for (i = 0; priv->rf_cal_state[i].rfmax != 0; i++) + tda18271_rf_tracking_filters_init(fe, 1000 * + priv->rf_cal_state[i].rfmax); + + *tm_rfcal = tda18271_read_thermometer(fe); + + return 0; +} + +/* ------------------------------------------------------------------ */ + +static int tda18271_init_cal(struct dvb_frontend *fe, int *tm) +{ + struct tda18271_priv *priv = fe->tuner_priv; + + if (priv->cal_initialized) + return 0; + + /* initialization */ + tda18271_init(fe); + + tda18271_calc_rf_filter_curve(fe, tm); + + tda18271_por(fe); + + priv->cal_initialized = true; + + return 0; +} + +static int tda18271c2_tune(struct dvb_frontend *fe, + u32 ifc, u32 freq, u32 bw, u8 std) +{ + int tm = 0; + + tda_dbg("freq = %d, ifc = %d\n", freq, ifc); + + tda18271_init_cal(fe, &tm); + + tda18271_rf_tracking_filters_correction(fe, freq, tm); + + tda18271_channel_configuration(fe, ifc, freq, bw, std); + + return 0; +} + +/* ------------------------------------------------------------------ */ + +static int tda18271c1_tune(struct dvb_frontend *fe, + u32 ifc, u32 freq, u32 bw, u8 std) { struct tda18271_priv *priv = fe->tuner_priv; unsigned char *regs = priv->tda18271_regs; @@ -520,7 +1209,7 @@ static int tda18271_tune(struct dvb_frontend *fe, /* RF tracking filter calibration */ - /* calculate BP_Filter */ + /* calculate bp filter */ tda18271_calc_bp_filter(fe, &freq); tda18271_write_regs(fe, R_EP1, 1); @@ -537,10 +1226,10 @@ static int tda18271_tune(struct dvb_frontend *fe, regs[R_EB20] = 0xcc; tda18271_write_regs(fe, R_EB20, 1); - /* set CAL mode to RF tracking filter calibration */ + /* set cal mode to RF tracking filter calibration */ regs[R_EP4] |= 0x03; - /* calculate CAL PLL */ + /* calculate cal pll */ switch (priv->mode) { case TDA18271_ANALOG: @@ -553,7 +1242,7 @@ static int tda18271_tune(struct dvb_frontend *fe, tda18271_calc_cal_pll(fe, N); - /* calculate MAIN PLL */ + /* calculate main pll */ switch (priv->mode) { case TDA18271_ANALOG: @@ -569,14 +1258,14 @@ static int tda18271_tune(struct dvb_frontend *fe, tda18271_write_regs(fe, R_EP3, 11); msleep(5); /* RF tracking filter calibration initialization */ - /* search for K,M,CO for RF Calibration */ + /* search for K,M,CO for RF calibration */ tda18271_calc_km(fe, &freq); tda18271_write_regs(fe, R_EB13, 1); - /* search for RF_BAND */ + /* search for rf band */ tda18271_calc_rf_band(fe, &freq); - /* search for Gain_Taper */ + /* search for gain taper */ tda18271_calc_gain_taper(fe, &freq); tda18271_write_regs(fe, R_EP2, 1); @@ -660,10 +1349,13 @@ static int tda18271_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) { struct tda18271_priv *priv = fe->tuner_priv; + struct tda18271_std_map *std_map = priv->std; u8 std; u32 bw, sgIF = 0; u32 freq = params->frequency; + BUG_ON(!priv->tune || !priv->std); + priv->mode = TDA18271_DIGITAL; /* see table 22 */ @@ -671,13 +1363,13 @@ static int tda18271_set_params(struct dvb_frontend *fe, switch (params->u.vsb.modulation) { case VSB_8: case VSB_16: - std = 0x1b; /* device-specific (spec says 0x1c) */ - sgIF = 5380000; + std = std_map->atsc_6.std_bits; + sgIF = std_map->atsc_6.if_freq; break; case QAM_64: case QAM_256: - std = 0x18; /* device-specific (spec says 0x1d) */ - sgIF = 4000000; + std = std_map->qam_6.std_bits; + sgIF = std_map->qam_6.if_freq; break; default: tda_warn("modulation not set!\n"); @@ -691,19 +1383,19 @@ static int tda18271_set_params(struct dvb_frontend *fe, } else if (fe->ops.info.type == FE_OFDM) { switch (params->u.ofdm.bandwidth) { case BANDWIDTH_6_MHZ: - std = 0x1b; /* device-specific (spec says 0x1c) */ bw = 6000000; - sgIF = 3300000; + std = std_map->dvbt_6.std_bits; + sgIF = std_map->dvbt_6.if_freq; break; case BANDWIDTH_7_MHZ: - std = 0x19; /* device-specific (spec says 0x1d) */ bw = 7000000; - sgIF = 3800000; + std = std_map->dvbt_7.std_bits; + sgIF = std_map->dvbt_7.if_freq; break; case BANDWIDTH_8_MHZ: - std = 0x1a; /* device-specific (spec says 0x1e) */ bw = 8000000; - sgIF = 4300000; + std = std_map->dvbt_8.std_bits; + sgIF = std_map->dvbt_8.if_freq; break; default: tda_warn("bandwidth not set!\n"); @@ -714,57 +1406,59 @@ static int tda18271_set_params(struct dvb_frontend *fe, return -EINVAL; } - return tda18271_tune(fe, sgIF, freq, bw, std); + return priv->tune(fe, sgIF, freq, bw, std); } static int tda18271_set_analog_params(struct dvb_frontend *fe, struct analog_parameters *params) { struct tda18271_priv *priv = fe->tuner_priv; + struct tda18271_std_map *std_map = priv->std; char *mode; u8 std; u32 sgIF, freq = params->frequency * 62500; + BUG_ON(!priv->tune || !priv->std); + priv->mode = TDA18271_ANALOG; - /* see table 22 */ if (params->std & V4L2_STD_MN) { - std = 0x0d; - sgIF = 5750000; + std = std_map->atv_mn.std_bits; + sgIF = std_map->atv_mn.if_freq; mode = "MN"; } else if (params->std & V4L2_STD_B) { - std = 0x0e; - sgIF = 6750000; + std = std_map->atv_b.std_bits; + sgIF = std_map->atv_b.if_freq; mode = "B"; } else if (params->std & V4L2_STD_GH) { - std = 0x0f; - sgIF = 7750000; + std = std_map->atv_gh.std_bits; + sgIF = std_map->atv_gh.if_freq; mode = "GH"; } else if (params->std & V4L2_STD_PAL_I) { - std = 0x0f; - sgIF = 7750000; + std = std_map->atv_i.std_bits; + sgIF = std_map->atv_i.if_freq; mode = "I"; } else if (params->std & V4L2_STD_DK) { - std = 0x0f; - sgIF = 7750000; + std = std_map->atv_dk.std_bits; + sgIF = std_map->atv_dk.if_freq; mode = "DK"; } else if (params->std & V4L2_STD_SECAM_L) { - std = 0x0f; - sgIF = 7750000; + std = std_map->atv_l.std_bits; + sgIF = std_map->atv_l.if_freq; mode = "L"; } else if (params->std & V4L2_STD_SECAM_LC) { - std = 0x0f; - sgIF = 1250000; + std = std_map->atv_lc.std_bits; + sgIF = std_map->atv_lc.if_freq; mode = "L'"; } else { - std = 0x0f; - sgIF = 7750000; + std = std_map->atv_i.std_bits; + sgIF = std_map->atv_i.if_freq; mode = "xx"; } tda_dbg("setting tda18271 to system %s\n", mode); - return tda18271_tune(fe, sgIF, freq, 0, std); + return priv->tune(fe, sgIF, freq, 0, std); } static int tda18271_release(struct dvb_frontend *fe) @@ -800,10 +1494,13 @@ static int tda18271_get_id(struct dvb_frontend *fe) switch (regs[R_ID] & 0x7f) { case 3: name = "TDA18271HD/C1"; + priv->id = TDA18271HDC1; + priv->tune = tda18271c1_tune; break; case 4: name = "TDA18271HD/C2"; - ret = -EPROTONOSUPPORT; + priv->id = TDA18271HDC2; + priv->tune = tda18271c2_tune; break; default: name = "Unknown device"; @@ -846,12 +1543,16 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, priv->i2c_addr = addr; priv->i2c_adap = i2c; priv->gate = gate; + priv->cal_initialized = false; fe->tuner_priv = priv; if (tda18271_get_id(fe) < 0) goto fail; + if (tda18271_assign_map_layout(fe) < 0) + goto fail; + memcpy(&fe->ops.tuner_ops, &tda18271_tuner_ops, sizeof(struct dvb_tuner_ops)); @@ -866,7 +1567,7 @@ EXPORT_SYMBOL_GPL(tda18271_attach); MODULE_DESCRIPTION("NXP TDA18271HD analog / digital tuner driver"); MODULE_AUTHOR("Michael Krufky "); MODULE_LICENSE("GPL"); -MODULE_VERSION("0.1"); +MODULE_VERSION("0.2"); /* * Overrides for Emacs so that we follow Linus's tabbing style. diff --git a/drivers/media/dvb/frontends/tda18271-priv.h b/drivers/media/dvb/frontends/tda18271-priv.h index 912b81e0c765..8552c6ae0d1f 100644 --- a/drivers/media/dvb/frontends/tda18271-priv.h +++ b/drivers/media/dvb/frontends/tda18271-priv.h @@ -69,11 +69,54 @@ /*---------------------------------------------------------------------*/ +struct tda18271_rf_tracking_filter_cal { + u32 rfmax; + u8 rfband; + u32 rf1_def; + u32 rf2_def; + u32 rf3_def; + u32 rf1; + u32 rf2; + u32 rf3; + int rf_a1; + int rf_b1; + int rf_a2; + int rf_b2; +}; + +struct tda18271_std_map_item { + u32 if_freq; + u8 std_bits; +}; + +struct tda18271_std_map { + struct tda18271_std_map_item atv_b; + struct tda18271_std_map_item atv_dk; + struct tda18271_std_map_item atv_gh; + struct tda18271_std_map_item atv_i; + struct tda18271_std_map_item atv_l; + struct tda18271_std_map_item atv_lc; + struct tda18271_std_map_item atv_mn; + struct tda18271_std_map_item atsc_6; + struct tda18271_std_map_item dvbt_6; + struct tda18271_std_map_item dvbt_7; + struct tda18271_std_map_item dvbt_8; + struct tda18271_std_map_item qam_6; + struct tda18271_std_map_item qam_8; +}; + enum tda18271_mode { TDA18271_ANALOG, TDA18271_DIGITAL, }; +struct tda18271_map_layout; + +enum tda18271_ver { + TDA18271HDC1, + TDA18271HDC2, +}; + struct tda18271_priv { u8 i2c_addr; struct i2c_adapter *i2c_adap; @@ -81,6 +124,16 @@ struct tda18271_priv { enum tda18271_mode mode; enum tda18271_i2c_gate gate; + enum tda18271_ver id; + + unsigned int cal_initialized:1; + + struct tda18271_std_map *std; + struct tda18271_map_layout *maps; + struct tda18271_rf_tracking_filter_cal rf_cal_state[8]; + + int (*tune) (struct dvb_frontend *fe, + u32 ifc, u32 freq, u32 bw, u8 std); u32 frequency; u32 bandwidth; @@ -93,6 +146,7 @@ extern int tda18271_debug; #define DBG_INFO 1 #define DBG_MAP 2 #define DBG_REG 4 +#define DBG_ADV 8 #define tda_printk(kern, fmt, arg...) \ printk(kern "%s: " fmt, __FUNCTION__, ##arg) @@ -117,17 +171,31 @@ enum tda18271_map_type { /* tda18271_map */ RF_CAL, RF_CAL_KMCO, + RF_CAL_DC_OVER_DT, BP_FILTER, RF_BAND, GAIN_TAPER, IR_MEASURE, }; -extern int tda18271_lookup_pll_map(enum tda18271_map_type map_type, +extern int tda18271_lookup_pll_map(struct dvb_frontend *fe, + enum tda18271_map_type map_type, u32 *freq, u8 *post_div, u8 *div); -extern int tda18271_lookup_map(enum tda18271_map_type map_type, +extern int tda18271_lookup_map(struct dvb_frontend *fe, + enum tda18271_map_type map_type, u32 *freq, u8 *val); +extern int tda18271_lookup_thermometer(struct dvb_frontend *fe); + +extern int tda18271_lookup_rf_band(struct dvb_frontend *fe, + u32 *freq, u8 *rf_band); + +extern int tda18271_lookup_cid_target(struct dvb_frontend *fe, + u32 *freq, u8 *cid_target, + u16 *count_limit); + +extern int tda18271_assign_map_layout(struct dvb_frontend *fe); + #endif /* __TDA18271_PRIV_H__ */ /* diff --git a/drivers/media/dvb/frontends/tda18271-tables.c b/drivers/media/dvb/frontends/tda18271-tables.c index f8202c40b046..3042e5c873ef 100644 --- a/drivers/media/dvb/frontends/tda18271-tables.c +++ b/drivers/media/dvb/frontends/tda18271-tables.c @@ -33,7 +33,7 @@ struct tda18271_map { /*---------------------------------------------------------------------*/ -static struct tda18271_pll_map tda18271_main_pll[] = { +static struct tda18271_pll_map tda18271c1_main_pll[] = { { .lomax = 32000, .pd = 0x5f, .d = 0xf0 }, { .lomax = 35000, .pd = 0x5e, .d = 0xe0 }, { .lomax = 37000, .pd = 0x5d, .d = 0xd0 }, @@ -77,7 +77,51 @@ static struct tda18271_pll_map tda18271_main_pll[] = { { .lomax = 0, .pd = 0x00, .d = 0x00 }, /* end */ }; -static struct tda18271_pll_map tda18271_cal_pll[] = { +static struct tda18271_pll_map tda18271c2_main_pll[] = { + { .lomax = 33125, .pd = 0x57, .d = 0xf0 }, + { .lomax = 35500, .pd = 0x56, .d = 0xe0 }, + { .lomax = 38188, .pd = 0x55, .d = 0xd0 }, + { .lomax = 41375, .pd = 0x54, .d = 0xc0 }, + { .lomax = 45125, .pd = 0x53, .d = 0xb0 }, + { .lomax = 49688, .pd = 0x52, .d = 0xa0 }, + { .lomax = 55188, .pd = 0x51, .d = 0x90 }, + { .lomax = 62125, .pd = 0x50, .d = 0x80 }, + { .lomax = 66250, .pd = 0x47, .d = 0x78 }, + { .lomax = 71000, .pd = 0x46, .d = 0x70 }, + { .lomax = 76375, .pd = 0x45, .d = 0x68 }, + { .lomax = 82750, .pd = 0x44, .d = 0x60 }, + { .lomax = 90250, .pd = 0x43, .d = 0x58 }, + { .lomax = 99375, .pd = 0x42, .d = 0x50 }, + { .lomax = 110375, .pd = 0x41, .d = 0x48 }, + { .lomax = 124250, .pd = 0x40, .d = 0x40 }, + { .lomax = 132500, .pd = 0x37, .d = 0x3c }, + { .lomax = 142000, .pd = 0x36, .d = 0x38 }, + { .lomax = 152750, .pd = 0x35, .d = 0x34 }, + { .lomax = 165500, .pd = 0x34, .d = 0x30 }, + { .lomax = 180500, .pd = 0x33, .d = 0x2c }, + { .lomax = 198750, .pd = 0x32, .d = 0x28 }, + { .lomax = 220750, .pd = 0x31, .d = 0x24 }, + { .lomax = 248500, .pd = 0x30, .d = 0x20 }, + { .lomax = 265000, .pd = 0x27, .d = 0x1e }, + { .lomax = 284000, .pd = 0x26, .d = 0x1c }, + { .lomax = 305500, .pd = 0x25, .d = 0x1a }, + { .lomax = 331000, .pd = 0x24, .d = 0x18 }, + { .lomax = 361000, .pd = 0x23, .d = 0x16 }, + { .lomax = 397500, .pd = 0x22, .d = 0x14 }, + { .lomax = 441500, .pd = 0x21, .d = 0x12 }, + { .lomax = 497000, .pd = 0x20, .d = 0x10 }, + { .lomax = 530000, .pd = 0x17, .d = 0x0f }, + { .lomax = 568000, .pd = 0x16, .d = 0x0e }, + { .lomax = 611000, .pd = 0x15, .d = 0x0d }, + { .lomax = 662000, .pd = 0x14, .d = 0x0c }, + { .lomax = 722000, .pd = 0x13, .d = 0x0b }, + { .lomax = 795000, .pd = 0x12, .d = 0x0a }, + { .lomax = 883000, .pd = 0x11, .d = 0x09 }, + { .lomax = 994000, .pd = 0x10, .d = 0x08 }, + { .lomax = 0, .pd = 0x00, .d = 0x00 }, /* end */ +}; + +static struct tda18271_pll_map tda18271c1_cal_pll[] = { { .lomax = 33000, .pd = 0xdd, .d = 0xd0 }, { .lomax = 36000, .pd = 0xdc, .d = 0xc0 }, { .lomax = 40000, .pd = 0xdb, .d = 0xb0 }, @@ -116,6 +160,44 @@ static struct tda18271_pll_map tda18271_cal_pll[] = { { .lomax = 0, .pd = 0x00, .d = 0x00 }, /* end */ }; +static struct tda18271_pll_map tda18271c2_cal_pll[] = { + { .lomax = 33813, .pd = 0xdd, .d = 0xd0 }, + { .lomax = 36625, .pd = 0xdc, .d = 0xc0 }, + { .lomax = 39938, .pd = 0xdb, .d = 0xb0 }, + { .lomax = 43938, .pd = 0xda, .d = 0xa0 }, + { .lomax = 48813, .pd = 0xd9, .d = 0x90 }, + { .lomax = 54938, .pd = 0xd8, .d = 0x80 }, + { .lomax = 62813, .pd = 0xd3, .d = 0x70 }, + { .lomax = 67625, .pd = 0xcd, .d = 0x68 }, + { .lomax = 73250, .pd = 0xcc, .d = 0x60 }, + { .lomax = 79875, .pd = 0xcb, .d = 0x58 }, + { .lomax = 87875, .pd = 0xca, .d = 0x50 }, + { .lomax = 97625, .pd = 0xc9, .d = 0x48 }, + { .lomax = 109875, .pd = 0xc8, .d = 0x40 }, + { .lomax = 125625, .pd = 0xc3, .d = 0x38 }, + { .lomax = 135250, .pd = 0xbd, .d = 0x34 }, + { .lomax = 146500, .pd = 0xbc, .d = 0x30 }, + { .lomax = 159750, .pd = 0xbb, .d = 0x2c }, + { .lomax = 175750, .pd = 0xba, .d = 0x28 }, + { .lomax = 195250, .pd = 0xb9, .d = 0x24 }, + { .lomax = 219750, .pd = 0xb8, .d = 0x20 }, + { .lomax = 251250, .pd = 0xb3, .d = 0x1c }, + { .lomax = 270500, .pd = 0xad, .d = 0x1a }, + { .lomax = 293000, .pd = 0xac, .d = 0x18 }, + { .lomax = 319500, .pd = 0xab, .d = 0x16 }, + { .lomax = 351500, .pd = 0xaa, .d = 0x14 }, + { .lomax = 390500, .pd = 0xa9, .d = 0x12 }, + { .lomax = 439500, .pd = 0xa8, .d = 0x10 }, + { .lomax = 502500, .pd = 0xa3, .d = 0x0e }, + { .lomax = 541000, .pd = 0x9d, .d = 0x0d }, + { .lomax = 586000, .pd = 0x9c, .d = 0x0c }, + { .lomax = 639000, .pd = 0x9b, .d = 0x0b }, + { .lomax = 703000, .pd = 0x9a, .d = 0x0a }, + { .lomax = 781000, .pd = 0x99, .d = 0x09 }, + { .lomax = 879000, .pd = 0x98, .d = 0x08 }, + { .lomax = 0, .pd = 0x00, .d = 0x00 }, /* end */ +}; + static struct tda18271_map tda18271_bp_filter[] = { { .rfmax = 62000, .val = 0x00 }, { .rfmax = 84000, .val = 0x01 }, @@ -127,7 +209,7 @@ static struct tda18271_map tda18271_bp_filter[] = { { .rfmax = 0, .val = 0x00 }, /* end */ }; -static struct tda18271_map tda18271_km[] = { +static struct tda18271_map tda18271c1_km[] = { { .rfmax = 61100, .val = 0x74 }, { .rfmax = 350000, .val = 0x40 }, { .rfmax = 720000, .val = 0x30 }, @@ -135,6 +217,15 @@ static struct tda18271_map tda18271_km[] = { { .rfmax = 0, .val = 0x00 }, /* end */ }; +static struct tda18271_map tda18271c2_km[] = { + { .rfmax = 47900, .val = 0x38 }, + { .rfmax = 61100, .val = 0x44 }, + { .rfmax = 350000, .val = 0x30 }, + { .rfmax = 720000, .val = 0x24 }, + { .rfmax = 865000, .val = 0x3c }, + { .rfmax = 0, .val = 0x00 }, /* end */ +}; + static struct tda18271_map tda18271_rf_band[] = { { .rfmax = 47900, .val = 0x00 }, { .rfmax = 61100, .val = 0x01 }, @@ -236,7 +327,7 @@ static struct tda18271_map tda18271_gain_taper[] = { { .rfmax = 0, .val = 0x00 }, /* end */ }; -static struct tda18271_map tda18271_rf_cal[] = { +static struct tda18271_map tda18271c1_rf_cal[] = { { .rfmax = 41000, .val = 0x1e }, { .rfmax = 43000, .val = 0x30 }, { .rfmax = 45000, .val = 0x43 }, @@ -257,6 +348,446 @@ static struct tda18271_map tda18271_rf_cal[] = { { .rfmax = 0, .val = 0x00 }, /* end */ }; +static struct tda18271_map tda18271c2_rf_cal[] = { + { .rfmax = 41000, .val = 0x0f }, + { .rfmax = 43000, .val = 0x1c }, + { .rfmax = 45000, .val = 0x2f }, + { .rfmax = 46000, .val = 0x39 }, + { .rfmax = 47000, .val = 0x40 }, + { .rfmax = 47900, .val = 0x50 }, + { .rfmax = 49100, .val = 0x16 }, + { .rfmax = 50000, .val = 0x18 }, + { .rfmax = 51000, .val = 0x20 }, + { .rfmax = 53000, .val = 0x28 }, + { .rfmax = 55000, .val = 0x2b }, + { .rfmax = 56000, .val = 0x32 }, + { .rfmax = 57000, .val = 0x35 }, + { .rfmax = 58000, .val = 0x3e }, + { .rfmax = 59000, .val = 0x43 }, + { .rfmax = 60000, .val = 0x4e }, + { .rfmax = 61100, .val = 0x55 }, + { .rfmax = 63000, .val = 0x0f }, + { .rfmax = 64000, .val = 0x11 }, + { .rfmax = 65000, .val = 0x12 }, + { .rfmax = 66000, .val = 0x15 }, + { .rfmax = 67000, .val = 0x16 }, + { .rfmax = 68000, .val = 0x17 }, + { .rfmax = 70000, .val = 0x19 }, + { .rfmax = 71000, .val = 0x1c }, + { .rfmax = 72000, .val = 0x1d }, + { .rfmax = 73000, .val = 0x1f }, + { .rfmax = 74000, .val = 0x20 }, + { .rfmax = 75000, .val = 0x21 }, + { .rfmax = 76000, .val = 0x24 }, + { .rfmax = 77000, .val = 0x25 }, + { .rfmax = 78000, .val = 0x27 }, + { .rfmax = 80000, .val = 0x28 }, + { .rfmax = 81000, .val = 0x29 }, + { .rfmax = 82000, .val = 0x2d }, + { .rfmax = 83000, .val = 0x2e }, + { .rfmax = 84000, .val = 0x2f }, + { .rfmax = 85000, .val = 0x31 }, + { .rfmax = 86000, .val = 0x33 }, + { .rfmax = 87000, .val = 0x34 }, + { .rfmax = 88000, .val = 0x35 }, + { .rfmax = 89000, .val = 0x37 }, + { .rfmax = 90000, .val = 0x38 }, + { .rfmax = 91000, .val = 0x39 }, + { .rfmax = 93000, .val = 0x3c }, + { .rfmax = 94000, .val = 0x3e }, + { .rfmax = 95000, .val = 0x3f }, + { .rfmax = 96000, .val = 0x40 }, + { .rfmax = 97000, .val = 0x42 }, + { .rfmax = 99000, .val = 0x45 }, + { .rfmax = 100000, .val = 0x46 }, + { .rfmax = 102000, .val = 0x48 }, + { .rfmax = 103000, .val = 0x4a }, + { .rfmax = 105000, .val = 0x4d }, + { .rfmax = 106000, .val = 0x4e }, + { .rfmax = 107000, .val = 0x50 }, + { .rfmax = 108000, .val = 0x51 }, + { .rfmax = 110000, .val = 0x54 }, + { .rfmax = 111000, .val = 0x56 }, + { .rfmax = 112000, .val = 0x57 }, + { .rfmax = 113000, .val = 0x58 }, + { .rfmax = 114000, .val = 0x59 }, + { .rfmax = 115000, .val = 0x5c }, + { .rfmax = 116000, .val = 0x5d }, + { .rfmax = 117000, .val = 0x5f }, + { .rfmax = 119000, .val = 0x60 }, + { .rfmax = 120000, .val = 0x64 }, + { .rfmax = 121000, .val = 0x65 }, + { .rfmax = 122000, .val = 0x66 }, + { .rfmax = 123000, .val = 0x68 }, + { .rfmax = 124000, .val = 0x69 }, + { .rfmax = 125000, .val = 0x6c }, + { .rfmax = 126000, .val = 0x6d }, + { .rfmax = 127000, .val = 0x6e }, + { .rfmax = 128000, .val = 0x70 }, + { .rfmax = 129000, .val = 0x71 }, + { .rfmax = 130000, .val = 0x75 }, + { .rfmax = 131000, .val = 0x77 }, + { .rfmax = 132000, .val = 0x78 }, + { .rfmax = 133000, .val = 0x7b }, + { .rfmax = 134000, .val = 0x7e }, + { .rfmax = 135000, .val = 0x81 }, + { .rfmax = 136000, .val = 0x82 }, + { .rfmax = 137000, .val = 0x87 }, + { .rfmax = 138000, .val = 0x88 }, + { .rfmax = 139000, .val = 0x8d }, + { .rfmax = 140000, .val = 0x8e }, + { .rfmax = 141000, .val = 0x91 }, + { .rfmax = 142000, .val = 0x95 }, + { .rfmax = 143000, .val = 0x9a }, + { .rfmax = 144000, .val = 0x9d }, + { .rfmax = 145000, .val = 0xa1 }, + { .rfmax = 146000, .val = 0xa2 }, + { .rfmax = 147000, .val = 0xa4 }, + { .rfmax = 148000, .val = 0xa9 }, + { .rfmax = 149000, .val = 0xae }, + { .rfmax = 150000, .val = 0xb0 }, + { .rfmax = 151000, .val = 0xb1 }, + { .rfmax = 152000, .val = 0xb7 }, + { .rfmax = 153000, .val = 0xbd }, + { .rfmax = 154000, .val = 0x20 }, + { .rfmax = 155000, .val = 0x22 }, + { .rfmax = 156000, .val = 0x24 }, + { .rfmax = 157000, .val = 0x25 }, + { .rfmax = 158000, .val = 0x27 }, + { .rfmax = 159000, .val = 0x29 }, + { .rfmax = 160000, .val = 0x2c }, + { .rfmax = 161000, .val = 0x2d }, + { .rfmax = 163000, .val = 0x2e }, + { .rfmax = 164000, .val = 0x2f }, + { .rfmax = 165000, .val = 0x30 }, + { .rfmax = 166000, .val = 0x11 }, + { .rfmax = 167000, .val = 0x12 }, + { .rfmax = 168000, .val = 0x13 }, + { .rfmax = 169000, .val = 0x14 }, + { .rfmax = 170000, .val = 0x15 }, + { .rfmax = 172000, .val = 0x16 }, + { .rfmax = 173000, .val = 0x17 }, + { .rfmax = 174000, .val = 0x18 }, + { .rfmax = 175000, .val = 0x1a }, + { .rfmax = 176000, .val = 0x1b }, + { .rfmax = 178000, .val = 0x1d }, + { .rfmax = 179000, .val = 0x1e }, + { .rfmax = 180000, .val = 0x1f }, + { .rfmax = 181000, .val = 0x20 }, + { .rfmax = 182000, .val = 0x21 }, + { .rfmax = 183000, .val = 0x22 }, + { .rfmax = 184000, .val = 0x24 }, + { .rfmax = 185000, .val = 0x25 }, + { .rfmax = 186000, .val = 0x26 }, + { .rfmax = 187000, .val = 0x27 }, + { .rfmax = 188000, .val = 0x29 }, + { .rfmax = 189000, .val = 0x2a }, + { .rfmax = 190000, .val = 0x2c }, + { .rfmax = 191000, .val = 0x2d }, + { .rfmax = 192000, .val = 0x2e }, + { .rfmax = 193000, .val = 0x2f }, + { .rfmax = 194000, .val = 0x30 }, + { .rfmax = 195000, .val = 0x33 }, + { .rfmax = 196000, .val = 0x35 }, + { .rfmax = 198000, .val = 0x36 }, + { .rfmax = 200000, .val = 0x38 }, + { .rfmax = 201000, .val = 0x3c }, + { .rfmax = 202000, .val = 0x3d }, + { .rfmax = 203500, .val = 0x3e }, + { .rfmax = 206000, .val = 0x0e }, + { .rfmax = 208000, .val = 0x0f }, + { .rfmax = 212000, .val = 0x10 }, + { .rfmax = 216000, .val = 0x11 }, + { .rfmax = 217000, .val = 0x12 }, + { .rfmax = 218000, .val = 0x13 }, + { .rfmax = 220000, .val = 0x14 }, + { .rfmax = 222000, .val = 0x15 }, + { .rfmax = 225000, .val = 0x16 }, + { .rfmax = 228000, .val = 0x17 }, + { .rfmax = 231000, .val = 0x18 }, + { .rfmax = 234000, .val = 0x19 }, + { .rfmax = 235000, .val = 0x1a }, + { .rfmax = 236000, .val = 0x1b }, + { .rfmax = 237000, .val = 0x1c }, + { .rfmax = 240000, .val = 0x1d }, + { .rfmax = 242000, .val = 0x1f }, + { .rfmax = 247000, .val = 0x20 }, + { .rfmax = 249000, .val = 0x21 }, + { .rfmax = 252000, .val = 0x22 }, + { .rfmax = 253000, .val = 0x23 }, + { .rfmax = 254000, .val = 0x24 }, + { .rfmax = 256000, .val = 0x25 }, + { .rfmax = 259000, .val = 0x26 }, + { .rfmax = 262000, .val = 0x27 }, + { .rfmax = 264000, .val = 0x28 }, + { .rfmax = 267000, .val = 0x29 }, + { .rfmax = 269000, .val = 0x2a }, + { .rfmax = 271000, .val = 0x2b }, + { .rfmax = 273000, .val = 0x2c }, + { .rfmax = 275000, .val = 0x2d }, + { .rfmax = 277000, .val = 0x2e }, + { .rfmax = 279000, .val = 0x2f }, + { .rfmax = 282000, .val = 0x30 }, + { .rfmax = 284000, .val = 0x31 }, + { .rfmax = 286000, .val = 0x32 }, + { .rfmax = 287000, .val = 0x33 }, + { .rfmax = 290000, .val = 0x34 }, + { .rfmax = 293000, .val = 0x35 }, + { .rfmax = 295000, .val = 0x36 }, + { .rfmax = 297000, .val = 0x37 }, + { .rfmax = 300000, .val = 0x38 }, + { .rfmax = 303000, .val = 0x39 }, + { .rfmax = 305000, .val = 0x3a }, + { .rfmax = 306000, .val = 0x3b }, + { .rfmax = 307000, .val = 0x3c }, + { .rfmax = 310000, .val = 0x3d }, + { .rfmax = 312000, .val = 0x3e }, + { .rfmax = 315000, .val = 0x3f }, + { .rfmax = 318000, .val = 0x40 }, + { .rfmax = 320000, .val = 0x41 }, + { .rfmax = 323000, .val = 0x42 }, + { .rfmax = 324000, .val = 0x43 }, + { .rfmax = 325000, .val = 0x44 }, + { .rfmax = 327000, .val = 0x45 }, + { .rfmax = 331000, .val = 0x46 }, + { .rfmax = 334000, .val = 0x47 }, + { .rfmax = 337000, .val = 0x48 }, + { .rfmax = 339000, .val = 0x49 }, + { .rfmax = 340000, .val = 0x4a }, + { .rfmax = 341000, .val = 0x4b }, + { .rfmax = 343000, .val = 0x4c }, + { .rfmax = 345000, .val = 0x4d }, + { .rfmax = 349000, .val = 0x4e }, + { .rfmax = 352000, .val = 0x4f }, + { .rfmax = 353000, .val = 0x50 }, + { .rfmax = 355000, .val = 0x51 }, + { .rfmax = 357000, .val = 0x52 }, + { .rfmax = 359000, .val = 0x53 }, + { .rfmax = 361000, .val = 0x54 }, + { .rfmax = 362000, .val = 0x55 }, + { .rfmax = 364000, .val = 0x56 }, + { .rfmax = 368000, .val = 0x57 }, + { .rfmax = 370000, .val = 0x58 }, + { .rfmax = 372000, .val = 0x59 }, + { .rfmax = 375000, .val = 0x5a }, + { .rfmax = 376000, .val = 0x5b }, + { .rfmax = 377000, .val = 0x5c }, + { .rfmax = 379000, .val = 0x5d }, + { .rfmax = 382000, .val = 0x5e }, + { .rfmax = 384000, .val = 0x5f }, + { .rfmax = 385000, .val = 0x60 }, + { .rfmax = 386000, .val = 0x61 }, + { .rfmax = 388000, .val = 0x62 }, + { .rfmax = 390000, .val = 0x63 }, + { .rfmax = 393000, .val = 0x64 }, + { .rfmax = 394000, .val = 0x65 }, + { .rfmax = 396000, .val = 0x66 }, + { .rfmax = 397000, .val = 0x67 }, + { .rfmax = 398000, .val = 0x68 }, + { .rfmax = 400000, .val = 0x69 }, + { .rfmax = 402000, .val = 0x6a }, + { .rfmax = 403000, .val = 0x6b }, + { .rfmax = 407000, .val = 0x6c }, + { .rfmax = 408000, .val = 0x6d }, + { .rfmax = 409000, .val = 0x6e }, + { .rfmax = 410000, .val = 0x6f }, + { .rfmax = 411000, .val = 0x70 }, + { .rfmax = 412000, .val = 0x71 }, + { .rfmax = 413000, .val = 0x72 }, + { .rfmax = 414000, .val = 0x73 }, + { .rfmax = 417000, .val = 0x74 }, + { .rfmax = 418000, .val = 0x75 }, + { .rfmax = 420000, .val = 0x76 }, + { .rfmax = 422000, .val = 0x77 }, + { .rfmax = 423000, .val = 0x78 }, + { .rfmax = 424000, .val = 0x79 }, + { .rfmax = 427000, .val = 0x7a }, + { .rfmax = 428000, .val = 0x7b }, + { .rfmax = 429000, .val = 0x7d }, + { .rfmax = 432000, .val = 0x7f }, + { .rfmax = 434000, .val = 0x80 }, + { .rfmax = 435000, .val = 0x81 }, + { .rfmax = 436000, .val = 0x83 }, + { .rfmax = 437000, .val = 0x84 }, + { .rfmax = 438000, .val = 0x85 }, + { .rfmax = 439000, .val = 0x86 }, + { .rfmax = 440000, .val = 0x87 }, + { .rfmax = 441000, .val = 0x88 }, + { .rfmax = 442000, .val = 0x89 }, + { .rfmax = 445000, .val = 0x8a }, + { .rfmax = 446000, .val = 0x8b }, + { .rfmax = 447000, .val = 0x8c }, + { .rfmax = 448000, .val = 0x8e }, + { .rfmax = 449000, .val = 0x8f }, + { .rfmax = 450000, .val = 0x90 }, + { .rfmax = 452000, .val = 0x91 }, + { .rfmax = 453000, .val = 0x93 }, + { .rfmax = 454000, .val = 0x94 }, + { .rfmax = 456000, .val = 0x96 }, + { .rfmax = 457000, .val = 0x98 }, + { .rfmax = 461000, .val = 0x11 }, + { .rfmax = 468000, .val = 0x12 }, + { .rfmax = 472000, .val = 0x13 }, + { .rfmax = 473000, .val = 0x14 }, + { .rfmax = 474000, .val = 0x15 }, + { .rfmax = 481000, .val = 0x16 }, + { .rfmax = 486000, .val = 0x17 }, + { .rfmax = 491000, .val = 0x18 }, + { .rfmax = 498000, .val = 0x19 }, + { .rfmax = 499000, .val = 0x1a }, + { .rfmax = 501000, .val = 0x1b }, + { .rfmax = 506000, .val = 0x1c }, + { .rfmax = 511000, .val = 0x1d }, + { .rfmax = 516000, .val = 0x1e }, + { .rfmax = 520000, .val = 0x1f }, + { .rfmax = 521000, .val = 0x20 }, + { .rfmax = 525000, .val = 0x21 }, + { .rfmax = 529000, .val = 0x22 }, + { .rfmax = 533000, .val = 0x23 }, + { .rfmax = 539000, .val = 0x24 }, + { .rfmax = 541000, .val = 0x25 }, + { .rfmax = 547000, .val = 0x26 }, + { .rfmax = 549000, .val = 0x27 }, + { .rfmax = 551000, .val = 0x28 }, + { .rfmax = 556000, .val = 0x29 }, + { .rfmax = 561000, .val = 0x2a }, + { .rfmax = 563000, .val = 0x2b }, + { .rfmax = 565000, .val = 0x2c }, + { .rfmax = 569000, .val = 0x2d }, + { .rfmax = 571000, .val = 0x2e }, + { .rfmax = 577000, .val = 0x2f }, + { .rfmax = 580000, .val = 0x30 }, + { .rfmax = 582000, .val = 0x31 }, + { .rfmax = 584000, .val = 0x32 }, + { .rfmax = 588000, .val = 0x33 }, + { .rfmax = 591000, .val = 0x34 }, + { .rfmax = 596000, .val = 0x35 }, + { .rfmax = 598000, .val = 0x36 }, + { .rfmax = 603000, .val = 0x37 }, + { .rfmax = 604000, .val = 0x38 }, + { .rfmax = 606000, .val = 0x39 }, + { .rfmax = 612000, .val = 0x3a }, + { .rfmax = 615000, .val = 0x3b }, + { .rfmax = 617000, .val = 0x3c }, + { .rfmax = 621000, .val = 0x3d }, + { .rfmax = 622000, .val = 0x3e }, + { .rfmax = 625000, .val = 0x3f }, + { .rfmax = 632000, .val = 0x40 }, + { .rfmax = 633000, .val = 0x41 }, + { .rfmax = 634000, .val = 0x42 }, + { .rfmax = 642000, .val = 0x43 }, + { .rfmax = 643000, .val = 0x44 }, + { .rfmax = 647000, .val = 0x45 }, + { .rfmax = 650000, .val = 0x46 }, + { .rfmax = 652000, .val = 0x47 }, + { .rfmax = 657000, .val = 0x48 }, + { .rfmax = 661000, .val = 0x49 }, + { .rfmax = 662000, .val = 0x4a }, + { .rfmax = 665000, .val = 0x4b }, + { .rfmax = 667000, .val = 0x4c }, + { .rfmax = 670000, .val = 0x4d }, + { .rfmax = 673000, .val = 0x4e }, + { .rfmax = 676000, .val = 0x4f }, + { .rfmax = 677000, .val = 0x50 }, + { .rfmax = 681000, .val = 0x51 }, + { .rfmax = 683000, .val = 0x52 }, + { .rfmax = 686000, .val = 0x53 }, + { .rfmax = 688000, .val = 0x54 }, + { .rfmax = 689000, .val = 0x55 }, + { .rfmax = 691000, .val = 0x56 }, + { .rfmax = 695000, .val = 0x57 }, + { .rfmax = 698000, .val = 0x58 }, + { .rfmax = 703000, .val = 0x59 }, + { .rfmax = 704000, .val = 0x5a }, + { .rfmax = 705000, .val = 0x5b }, + { .rfmax = 707000, .val = 0x5c }, + { .rfmax = 710000, .val = 0x5d }, + { .rfmax = 712000, .val = 0x5e }, + { .rfmax = 717000, .val = 0x5f }, + { .rfmax = 718000, .val = 0x60 }, + { .rfmax = 721000, .val = 0x61 }, + { .rfmax = 722000, .val = 0x62 }, + { .rfmax = 723000, .val = 0x63 }, + { .rfmax = 725000, .val = 0x64 }, + { .rfmax = 727000, .val = 0x65 }, + { .rfmax = 730000, .val = 0x66 }, + { .rfmax = 732000, .val = 0x67 }, + { .rfmax = 735000, .val = 0x68 }, + { .rfmax = 740000, .val = 0x69 }, + { .rfmax = 741000, .val = 0x6a }, + { .rfmax = 742000, .val = 0x6b }, + { .rfmax = 743000, .val = 0x6c }, + { .rfmax = 745000, .val = 0x6d }, + { .rfmax = 747000, .val = 0x6e }, + { .rfmax = 748000, .val = 0x6f }, + { .rfmax = 750000, .val = 0x70 }, + { .rfmax = 752000, .val = 0x71 }, + { .rfmax = 754000, .val = 0x72 }, + { .rfmax = 757000, .val = 0x73 }, + { .rfmax = 758000, .val = 0x74 }, + { .rfmax = 760000, .val = 0x75 }, + { .rfmax = 763000, .val = 0x76 }, + { .rfmax = 764000, .val = 0x77 }, + { .rfmax = 766000, .val = 0x78 }, + { .rfmax = 767000, .val = 0x79 }, + { .rfmax = 768000, .val = 0x7a }, + { .rfmax = 773000, .val = 0x7b }, + { .rfmax = 774000, .val = 0x7c }, + { .rfmax = 776000, .val = 0x7d }, + { .rfmax = 777000, .val = 0x7e }, + { .rfmax = 778000, .val = 0x7f }, + { .rfmax = 779000, .val = 0x80 }, + { .rfmax = 781000, .val = 0x81 }, + { .rfmax = 783000, .val = 0x82 }, + { .rfmax = 784000, .val = 0x83 }, + { .rfmax = 785000, .val = 0x84 }, + { .rfmax = 786000, .val = 0x85 }, + { .rfmax = 793000, .val = 0x86 }, + { .rfmax = 794000, .val = 0x87 }, + { .rfmax = 795000, .val = 0x88 }, + { .rfmax = 797000, .val = 0x89 }, + { .rfmax = 799000, .val = 0x8a }, + { .rfmax = 801000, .val = 0x8b }, + { .rfmax = 802000, .val = 0x8c }, + { .rfmax = 803000, .val = 0x8d }, + { .rfmax = 804000, .val = 0x8e }, + { .rfmax = 810000, .val = 0x90 }, + { .rfmax = 811000, .val = 0x91 }, + { .rfmax = 812000, .val = 0x92 }, + { .rfmax = 814000, .val = 0x93 }, + { .rfmax = 816000, .val = 0x94 }, + { .rfmax = 817000, .val = 0x96 }, + { .rfmax = 818000, .val = 0x97 }, + { .rfmax = 820000, .val = 0x98 }, + { .rfmax = 821000, .val = 0x99 }, + { .rfmax = 822000, .val = 0x9a }, + { .rfmax = 828000, .val = 0x9b }, + { .rfmax = 829000, .val = 0x9d }, + { .rfmax = 830000, .val = 0x9f }, + { .rfmax = 831000, .val = 0xa0 }, + { .rfmax = 833000, .val = 0xa1 }, + { .rfmax = 835000, .val = 0xa2 }, + { .rfmax = 836000, .val = 0xa3 }, + { .rfmax = 837000, .val = 0xa4 }, + { .rfmax = 838000, .val = 0xa6 }, + { .rfmax = 840000, .val = 0xa8 }, + { .rfmax = 842000, .val = 0xa9 }, + { .rfmax = 845000, .val = 0xaa }, + { .rfmax = 846000, .val = 0xab }, + { .rfmax = 847000, .val = 0xad }, + { .rfmax = 848000, .val = 0xae }, + { .rfmax = 852000, .val = 0xaf }, + { .rfmax = 853000, .val = 0xb0 }, + { .rfmax = 858000, .val = 0xb1 }, + { .rfmax = 860000, .val = 0xb2 }, + { .rfmax = 861000, .val = 0xb3 }, + { .rfmax = 862000, .val = 0xb4 }, + { .rfmax = 863000, .val = 0xb6 }, + { .rfmax = 864000, .val = 0xb8 }, + { .rfmax = 865000, .val = 0xb9 }, + { .rfmax = 0, .val = 0x00 }, /* end */ +}; + static struct tda18271_map tda18271_ir_measure[] = { { .rfmax = 30000, .val = 4 }, { .rfmax = 200000, .val = 5 }, @@ -265,23 +796,293 @@ static struct tda18271_map tda18271_ir_measure[] = { { .rfmax = 0, .val = 0 }, /* end */ }; +static struct tda18271_map tda18271_rf_cal_dc_over_dt[] = { + { .rfmax = 47900, .val = 0x00 }, + { .rfmax = 55000, .val = 0x00 }, + { .rfmax = 61100, .val = 0x0a }, + { .rfmax = 64000, .val = 0x0a }, + { .rfmax = 82000, .val = 0x14 }, + { .rfmax = 84000, .val = 0x19 }, + { .rfmax = 119000, .val = 0x1c }, + { .rfmax = 124000, .val = 0x20 }, + { .rfmax = 129000, .val = 0x2a }, + { .rfmax = 134000, .val = 0x32 }, + { .rfmax = 139000, .val = 0x39 }, + { .rfmax = 144000, .val = 0x3e }, + { .rfmax = 149000, .val = 0x3f }, + { .rfmax = 152600, .val = 0x40 }, + { .rfmax = 154000, .val = 0x40 }, + { .rfmax = 164700, .val = 0x41 }, + { .rfmax = 203500, .val = 0x32 }, + { .rfmax = 353000, .val = 0x19 }, + { .rfmax = 356000, .val = 0x1a }, + { .rfmax = 359000, .val = 0x1b }, + { .rfmax = 363000, .val = 0x1c }, + { .rfmax = 366000, .val = 0x1d }, + { .rfmax = 369000, .val = 0x1e }, + { .rfmax = 373000, .val = 0x1f }, + { .rfmax = 376000, .val = 0x20 }, + { .rfmax = 379000, .val = 0x21 }, + { .rfmax = 383000, .val = 0x22 }, + { .rfmax = 386000, .val = 0x23 }, + { .rfmax = 389000, .val = 0x24 }, + { .rfmax = 393000, .val = 0x25 }, + { .rfmax = 396000, .val = 0x26 }, + { .rfmax = 399000, .val = 0x27 }, + { .rfmax = 402000, .val = 0x28 }, + { .rfmax = 404000, .val = 0x29 }, + { .rfmax = 407000, .val = 0x2a }, + { .rfmax = 409000, .val = 0x2b }, + { .rfmax = 412000, .val = 0x2c }, + { .rfmax = 414000, .val = 0x2d }, + { .rfmax = 417000, .val = 0x2e }, + { .rfmax = 419000, .val = 0x2f }, + { .rfmax = 422000, .val = 0x30 }, + { .rfmax = 424000, .val = 0x31 }, + { .rfmax = 427000, .val = 0x32 }, + { .rfmax = 429000, .val = 0x33 }, + { .rfmax = 432000, .val = 0x34 }, + { .rfmax = 434000, .val = 0x35 }, + { .rfmax = 437000, .val = 0x36 }, + { .rfmax = 439000, .val = 0x37 }, + { .rfmax = 442000, .val = 0x38 }, + { .rfmax = 444000, .val = 0x39 }, + { .rfmax = 447000, .val = 0x3a }, + { .rfmax = 449000, .val = 0x3b }, + { .rfmax = 457800, .val = 0x3c }, + { .rfmax = 465000, .val = 0x0f }, + { .rfmax = 477000, .val = 0x12 }, + { .rfmax = 483000, .val = 0x14 }, + { .rfmax = 502000, .val = 0x19 }, + { .rfmax = 508000, .val = 0x1b }, + { .rfmax = 519000, .val = 0x1c }, + { .rfmax = 522000, .val = 0x1d }, + { .rfmax = 524000, .val = 0x1e }, + { .rfmax = 534000, .val = 0x1f }, + { .rfmax = 549000, .val = 0x20 }, + { .rfmax = 554000, .val = 0x22 }, + { .rfmax = 584000, .val = 0x24 }, + { .rfmax = 589000, .val = 0x26 }, + { .rfmax = 658000, .val = 0x27 }, + { .rfmax = 664000, .val = 0x2c }, + { .rfmax = 669000, .val = 0x2d }, + { .rfmax = 699000, .val = 0x2e }, + { .rfmax = 704000, .val = 0x30 }, + { .rfmax = 709000, .val = 0x31 }, + { .rfmax = 714000, .val = 0x32 }, + { .rfmax = 724000, .val = 0x33 }, + { .rfmax = 729000, .val = 0x36 }, + { .rfmax = 739000, .val = 0x38 }, + { .rfmax = 744000, .val = 0x39 }, + { .rfmax = 749000, .val = 0x3b }, + { .rfmax = 754000, .val = 0x3c }, + { .rfmax = 759000, .val = 0x3d }, + { .rfmax = 764000, .val = 0x3e }, + { .rfmax = 769000, .val = 0x3f }, + { .rfmax = 774000, .val = 0x40 }, + { .rfmax = 779000, .val = 0x41 }, + { .rfmax = 784000, .val = 0x43 }, + { .rfmax = 789000, .val = 0x46 }, + { .rfmax = 794000, .val = 0x48 }, + { .rfmax = 799000, .val = 0x4b }, + { .rfmax = 804000, .val = 0x4f }, + { .rfmax = 809000, .val = 0x54 }, + { .rfmax = 814000, .val = 0x59 }, + { .rfmax = 819000, .val = 0x5d }, + { .rfmax = 824000, .val = 0x61 }, + { .rfmax = 829000, .val = 0x68 }, + { .rfmax = 834000, .val = 0x6e }, + { .rfmax = 839000, .val = 0x75 }, + { .rfmax = 844000, .val = 0x7e }, + { .rfmax = 849000, .val = 0x82 }, + { .rfmax = 854000, .val = 0x84 }, + { .rfmax = 859000, .val = 0x8f }, + { .rfmax = 865000, .val = 0x9a }, + { .rfmax = 0, .val = 0x00 }, /* end */ +}; + +/*---------------------------------------------------------------------*/ + +struct tda18271_thermo_map { + u8 d; + u8 r0; + u8 r1; +}; + +static struct tda18271_thermo_map tda18271_thermometer[] = { + { .d = 0x00, .r0 = 60, .r1 = 92 }, + { .d = 0x01, .r0 = 62, .r1 = 94 }, + { .d = 0x02, .r0 = 66, .r1 = 98 }, + { .d = 0x03, .r0 = 64, .r1 = 96 }, + { .d = 0x04, .r0 = 74, .r1 = 106 }, + { .d = 0x05, .r0 = 72, .r1 = 104 }, + { .d = 0x06, .r0 = 68, .r1 = 100 }, + { .d = 0x07, .r0 = 70, .r1 = 102 }, + { .d = 0x08, .r0 = 90, .r1 = 122 }, + { .d = 0x09, .r0 = 88, .r1 = 120 }, + { .d = 0x0a, .r0 = 84, .r1 = 116 }, + { .d = 0x0b, .r0 = 86, .r1 = 118 }, + { .d = 0x0c, .r0 = 76, .r1 = 108 }, + { .d = 0x0d, .r0 = 78, .r1 = 110 }, + { .d = 0x0e, .r0 = 82, .r1 = 114 }, + { .d = 0x0f, .r0 = 80, .r1 = 112 }, + { .d = 0x00, .r0 = 0, .r1 = 0 }, /* end */ +}; + +int tda18271_lookup_thermometer(struct dvb_frontend *fe) +{ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + int val, i = 0; + + while (tda18271_thermometer[i].d < (regs[R_TM] & 0x0f)) { + if (tda18271_thermometer[i + 1].d == 0) + break; + i++; + } + + if ((regs[R_TM] & 0x20) == 0x20) + val = tda18271_thermometer[i].r1; + else + val = tda18271_thermometer[i].r0; + + tda_map("(%d) tm = %d\n", i, val); + + return val; +} + +/*---------------------------------------------------------------------*/ + +struct tda18271_cid_target_map { + u32 rfmax; + u8 target; + u16 limit; +}; + +static struct tda18271_cid_target_map tda18271_cid_target[] = { + { .rfmax = 46000, .target = 0x04, .limit = 1800 }, + { .rfmax = 52200, .target = 0x0a, .limit = 1500 }, + { .rfmax = 79100, .target = 0x01, .limit = 4000 }, + { .rfmax = 136800, .target = 0x18, .limit = 4000 }, + { .rfmax = 156700, .target = 0x18, .limit = 4000 }, + { .rfmax = 156700, .target = 0x18, .limit = 4000 }, + { .rfmax = 186250, .target = 0x0a, .limit = 4000 }, + { .rfmax = 230000, .target = 0x0a, .limit = 4000 }, + { .rfmax = 345000, .target = 0x18, .limit = 4000 }, + { .rfmax = 426000, .target = 0x0e, .limit = 4000 }, + { .rfmax = 489500, .target = 0x1e, .limit = 4000 }, + { .rfmax = 697500, .target = 0x32, .limit = 4000 }, + { .rfmax = 842000, .target = 0x3a, .limit = 4000 }, + { .rfmax = 0, .target = 0x00, .limit = 0 }, /* end */ +}; + +int tda18271_lookup_cid_target(struct dvb_frontend *fe, + u32 *freq, u8 *cid_target, u16 *count_limit) +{ + int i = 0; + + while ((tda18271_cid_target[i].rfmax * 1000) < *freq) { + if (tda18271_cid_target[i + 1].rfmax == 0) + break; + i++; + } + *cid_target = tda18271_cid_target[i].target; + *count_limit = tda18271_cid_target[i].limit; + + tda_map("(%d) cid_target = %02x, count_limit = %d\n", i, + tda18271_cid_target[i].target, tda18271_cid_target[i].limit); + + return 0; +} + +/*---------------------------------------------------------------------*/ + +static struct tda18271_rf_tracking_filter_cal tda18271_rf_band_template[] = { + { .rfmax = 47900, .rfband = 0x00, + .rf1_def = 46000, .rf2_def = 0, .rf3_def = 0 }, + { .rfmax = 61100, .rfband = 0x01, + .rf1_def = 52200, .rf2_def = 0, .rf3_def = 0 }, + { .rfmax = 152600, .rfband = 0x02, + .rf1_def = 70100, .rf2_def = 136800, .rf3_def = 0 }, + { .rfmax = 164700, .rfband = 0x03, + .rf1_def = 156700, .rf2_def = 0, .rf3_def = 0 }, + { .rfmax = 203500, .rfband = 0x04, + .rf1_def = 186250, .rf2_def = 0, .rf3_def = 0 }, + { .rfmax = 457800, .rfband = 0x05, + .rf1_def = 230000, .rf2_def = 345000, .rf3_def = 426000 }, + { .rfmax = 865000, .rfband = 0x06, + .rf1_def = 489500, .rf2_def = 697500, .rf3_def = 842000 }, + { .rfmax = 0, .rfband = 0x00, + .rf1_def = 0, .rf2_def = 0, .rf3_def = 0 }, /* end */ +}; + +int tda18271_lookup_rf_band(struct dvb_frontend *fe, u32 *freq, u8 *rf_band) +{ + struct tda18271_priv *priv = fe->tuner_priv; + struct tda18271_rf_tracking_filter_cal *map = priv->rf_cal_state; + int i = 0; + + while ((map[i].rfmax * 1000) < *freq) { + if (tda18271_debug & DBG_ADV) + tda_map("(%d) rfmax = %d < freq = %d, " + "rf1_def = %d, rf2_def = %d, rf3_def = %d, " + "rf1 = %d, rf2 = %d, rf3 = %d, " + "rf_a1 = %d, rf_a2 = %d, " + "rf_b1 = %d, rf_b2 = %d\n", + i, map[i].rfmax * 1000, *freq, + map[i].rf1_def, map[i].rf2_def, map[i].rf3_def, + map[i].rf1, map[i].rf2, map[i].rf3, + map[i].rf_a1, map[i].rf_a2, + map[i].rf_b1, map[i].rf_b2); + if (map[i].rfmax == 0) + return -EINVAL; + i++; + } + if (rf_band) + *rf_band = map[i].rfband; + + tda_map("(%d) rf_band = %02x\n", i, map[i].rfband); + + return i; +} + /*---------------------------------------------------------------------*/ -int tda18271_lookup_pll_map(enum tda18271_map_type map_type, +struct tda18271_map_layout { + struct tda18271_pll_map *main_pll; + struct tda18271_pll_map *cal_pll; + + struct tda18271_map *rf_cal; + struct tda18271_map *rf_cal_kmco; + struct tda18271_map *rf_cal_dc_over_dt; + + struct tda18271_map *bp_filter; + struct tda18271_map *rf_band; + struct tda18271_map *gain_taper; + struct tda18271_map *ir_measure; +}; + +/*---------------------------------------------------------------------*/ + +int tda18271_lookup_pll_map(struct dvb_frontend *fe, + enum tda18271_map_type map_type, u32 *freq, u8 *post_div, u8 *div) { + struct tda18271_priv *priv = fe->tuner_priv; struct tda18271_pll_map *map = NULL; unsigned int i = 0; char *map_name; int ret = 0; + BUG_ON(!priv->maps); + switch (map_type) { case MAIN_PLL: - map = tda18271_main_pll; + map = priv->maps->main_pll; map_name = "main_pll"; break; case CAL_PLL: - map = tda18271_cal_pll; + map = priv->maps->cal_pll; map_name = "cal_pll"; break; default: @@ -308,44 +1109,53 @@ int tda18271_lookup_pll_map(enum tda18271_map_type map_type, *post_div = map[i].pd; *div = map[i].d; - tda_map("%s: post div = 0x%02x, div = 0x%02x\n", - map_name, *post_div, *div); + tda_map("(%d) %s: post div = 0x%02x, div = 0x%02x\n", + i, map_name, *post_div, *div); fail: return ret; } -int tda18271_lookup_map(enum tda18271_map_type map_type, u32 *freq, u8 *val) +int tda18271_lookup_map(struct dvb_frontend *fe, + enum tda18271_map_type map_type, + u32 *freq, u8 *val) { + struct tda18271_priv *priv = fe->tuner_priv; struct tda18271_map *map = NULL; unsigned int i = 0; char *map_name; int ret = 0; + BUG_ON(!priv->maps); + switch (map_type) { case BP_FILTER: - map = tda18271_bp_filter; + map = priv->maps->bp_filter; map_name = "bp_filter"; break; case RF_CAL_KMCO: - map = tda18271_km; + map = priv->maps->rf_cal_kmco; map_name = "km"; break; case RF_BAND: - map = tda18271_rf_band; + map = priv->maps->rf_band; map_name = "rf_band"; break; case GAIN_TAPER: - map = tda18271_gain_taper; + map = priv->maps->gain_taper; map_name = "gain_taper"; break; case RF_CAL: - map = tda18271_rf_cal; + map = priv->maps->rf_cal; map_name = "rf_cal"; break; case IR_MEASURE: - map = tda18271_ir_measure; + map = priv->maps->ir_measure; map_name = "ir_measure"; break; + case RF_CAL_DC_OVER_DT: + map = priv->maps->rf_cal_dc_over_dt; + map_name = "rf_cal_dc_over_dt"; + break; default: /* we should never get here */ map_name = "undefined"; @@ -369,11 +1179,99 @@ int tda18271_lookup_map(enum tda18271_map_type map_type, u32 *freq, u8 *val) } *val = map[i].val; - tda_map("%s: 0x%02x\n", map_name, *val); + tda_map("(%d) %s: 0x%02x\n", i, map_name, *val); fail: return ret; } +/*---------------------------------------------------------------------*/ + +static struct tda18271_std_map tda18271c1_std_map = { + .atv_b = { .if_freq = 6750000, .std_bits = 0x0e }, + .atv_dk = { .if_freq = 7750000, .std_bits = 0x0f }, + .atv_gh = { .if_freq = 7750000, .std_bits = 0x0f }, + .atv_i = { .if_freq = 7750000, .std_bits = 0x0f }, + .atv_l = { .if_freq = 7750000, .std_bits = 0x0f }, + .atv_lc = { .if_freq = 1250000, .std_bits = 0x0f }, + .atv_mn = { .if_freq = 5750000, .std_bits = 0x0d }, + .atsc_6 = { .if_freq = 5380000, .std_bits = 0x1b }, + .dvbt_6 = { .if_freq = 3300000, .std_bits = 0x1b }, + .dvbt_7 = { .if_freq = 3800000, .std_bits = 0x19 }, + .dvbt_8 = { .if_freq = 4300000, .std_bits = 0x1a }, + .qam_6 = { .if_freq = 4000000, .std_bits = 0x18 }, + .qam_8 = { .if_freq = 5000000, .std_bits = 0x1f }, +}; + +static struct tda18271_std_map tda18271c2_std_map = { + .atv_b = { .if_freq = 6000000, .std_bits = 0x0d }, + .atv_dk = { .if_freq = 6900000, .std_bits = 0x0e }, + .atv_gh = { .if_freq = 7100000, .std_bits = 0x0e }, + .atv_i = { .if_freq = 7250000, .std_bits = 0x0e }, + .atv_l = { .if_freq = 6900000, .std_bits = 0x0e }, + .atv_lc = { .if_freq = 1250000, .std_bits = 0x0e }, + .atv_mn = { .if_freq = 5400000, .std_bits = 0x0c }, + .atsc_6 = { .if_freq = 5380000, .std_bits = 0x1b }, + .dvbt_6 = { .if_freq = 3300000, .std_bits = 0x1c }, + .dvbt_7 = { .if_freq = 3500000, .std_bits = 0x1c }, + .dvbt_8 = { .if_freq = 4000000, .std_bits = 0x1d }, + .qam_6 = { .if_freq = 4000000, .std_bits = 0x1d }, + .qam_8 = { .if_freq = 5000000, .std_bits = 0x1f }, +}; + +/*---------------------------------------------------------------------*/ + +static struct tda18271_map_layout tda18271c1_map_layout = { + .main_pll = tda18271c1_main_pll, + .cal_pll = tda18271c1_cal_pll, + + .rf_cal = tda18271c1_rf_cal, + .rf_cal_kmco = tda18271c1_km, + + .bp_filter = tda18271_bp_filter, + .rf_band = tda18271_rf_band, + .gain_taper = tda18271_gain_taper, + .ir_measure = tda18271_ir_measure, +}; + +static struct tda18271_map_layout tda18271c2_map_layout = { + .main_pll = tda18271c2_main_pll, + .cal_pll = tda18271c2_cal_pll, + + .rf_cal = tda18271c2_rf_cal, + .rf_cal_kmco = tda18271c2_km, + + .rf_cal_dc_over_dt = tda18271_rf_cal_dc_over_dt, + + .bp_filter = tda18271_bp_filter, + .rf_band = tda18271_rf_band, + .gain_taper = tda18271_gain_taper, + .ir_measure = tda18271_ir_measure, +}; + +int tda18271_assign_map_layout(struct dvb_frontend *fe) +{ + struct tda18271_priv *priv = fe->tuner_priv; + int ret = 0; + + switch (priv->id) { + case TDA18271HDC1: + priv->maps = &tda18271c1_map_layout; + priv->std = &tda18271c1_std_map; + break; + case TDA18271HDC2: + priv->maps = &tda18271c2_map_layout; + priv->std = &tda18271c2_std_map; + break; + default: + ret = -EINVAL; + break; + } + memcpy(priv->rf_cal_state, &tda18271_rf_band_template, + sizeof(tda18271_rf_band_template)); + + return ret; +} + /* * Overrides for Emacs so that we follow Linus's tabbing style. * --------------------------------------------------------------------------- diff --git a/drivers/media/video/tda8290.c b/drivers/media/video/tda8290.c index bb62d5629af2..54d261a2f25a 100644 --- a/drivers/media/video/tda8290.c +++ b/drivers/media/video/tda8290.c @@ -570,7 +570,7 @@ static int tda829x_find_tuner(struct dvb_frontend *fe) return -EREMOTEIO; } - if (data == 0x83) { + if ((data == 0x83) || (data == 0x84)) { priv->ver |= TDA18271; tda18271_attach(fe, priv->tda827x_addr, priv->i2c_props.adap, -- cgit v1.2.3-59-g8ed1b From 59067f7ed491ec95e6e9033e35e1ae726cff3cee Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 2 Jan 2008 01:58:26 -0300 Subject: V4L/DVB (6961): tda18271: move common code to tda18271-common.c Move some common code to a new file to make this easier to look at. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/Makefile | 2 +- drivers/media/dvb/frontends/tda18271-common.c | 619 ++++++++++++++++++++++++++ drivers/media/dvb/frontends/tda18271-fe.c | 583 +----------------------- drivers/media/dvb/frontends/tda18271-priv.h | 19 +- drivers/media/dvb/frontends/tda18271-tables.c | 2 +- drivers/media/dvb/frontends/tda18271.h | 2 +- 6 files changed, 641 insertions(+), 586 deletions(-) create mode 100644 drivers/media/dvb/frontends/tda18271-common.c diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index 1c082a6a9499..16bd107ebd32 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -5,7 +5,7 @@ EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ EXTRA_CFLAGS += -Idrivers/media/video/ -tda18271-objs := tda18271-tables.o tda18271-fe.o +tda18271-objs := tda18271-tables.o tda18271-common.o tda18271-fe.o obj-$(CONFIG_DVB_PLL) += dvb-pll.o obj-$(CONFIG_DVB_STV0299) += stv0299.o diff --git a/drivers/media/dvb/frontends/tda18271-common.c b/drivers/media/dvb/frontends/tda18271-common.c new file mode 100644 index 000000000000..4adc7390ba00 --- /dev/null +++ b/drivers/media/dvb/frontends/tda18271-common.c @@ -0,0 +1,619 @@ +/* + tda18271-common.c - driver for the Philips / NXP TDA18271 silicon tuner + + Copyright (C) 2007, 2008 Michael Krufky + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include "tda18271-priv.h" + +static int tda18271_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct tda18271_priv *priv = fe->tuner_priv; + enum tda18271_i2c_gate gate; + int ret = 0; + + switch (priv->gate) { + case TDA18271_GATE_DIGITAL: + case TDA18271_GATE_ANALOG: + gate = priv->gate; + break; + case TDA18271_GATE_AUTO: + default: + switch (priv->mode) { + case TDA18271_DIGITAL: + gate = TDA18271_GATE_DIGITAL; + break; + case TDA18271_ANALOG: + default: + gate = TDA18271_GATE_ANALOG; + break; + } + } + + switch (gate) { + case TDA18271_GATE_ANALOG: + if (fe->ops.analog_ops.i2c_gate_ctrl) + ret = fe->ops.analog_ops.i2c_gate_ctrl(fe, enable); + break; + case TDA18271_GATE_DIGITAL: + if (fe->ops.i2c_gate_ctrl) + ret = fe->ops.i2c_gate_ctrl(fe, enable); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +}; + +/*---------------------------------------------------------------------*/ + +static void tda18271_dump_regs(struct dvb_frontend *fe, int extended) +{ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + + tda_reg("=== TDA18271 REG DUMP ===\n"); + tda_reg("ID_BYTE = 0x%02x\n", 0xff & regs[R_ID]); + tda_reg("THERMO_BYTE = 0x%02x\n", 0xff & regs[R_TM]); + tda_reg("POWER_LEVEL_BYTE = 0x%02x\n", 0xff & regs[R_PL]); + tda_reg("EASY_PROG_BYTE_1 = 0x%02x\n", 0xff & regs[R_EP1]); + tda_reg("EASY_PROG_BYTE_2 = 0x%02x\n", 0xff & regs[R_EP2]); + tda_reg("EASY_PROG_BYTE_3 = 0x%02x\n", 0xff & regs[R_EP3]); + tda_reg("EASY_PROG_BYTE_4 = 0x%02x\n", 0xff & regs[R_EP4]); + tda_reg("EASY_PROG_BYTE_5 = 0x%02x\n", 0xff & regs[R_EP5]); + tda_reg("CAL_POST_DIV_BYTE = 0x%02x\n", 0xff & regs[R_CPD]); + tda_reg("CAL_DIV_BYTE_1 = 0x%02x\n", 0xff & regs[R_CD1]); + tda_reg("CAL_DIV_BYTE_2 = 0x%02x\n", 0xff & regs[R_CD2]); + tda_reg("CAL_DIV_BYTE_3 = 0x%02x\n", 0xff & regs[R_CD3]); + tda_reg("MAIN_POST_DIV_BYTE = 0x%02x\n", 0xff & regs[R_MPD]); + tda_reg("MAIN_DIV_BYTE_1 = 0x%02x\n", 0xff & regs[R_MD1]); + tda_reg("MAIN_DIV_BYTE_2 = 0x%02x\n", 0xff & regs[R_MD2]); + tda_reg("MAIN_DIV_BYTE_3 = 0x%02x\n", 0xff & regs[R_MD3]); + + /* only dump extended regs if DBG_ADV is set */ + if (!(tda18271_debug & DBG_ADV)) + return; + + /* W indicates write-only registers. + * Register dump for write-only registers shows last value written. */ + + tda_reg("EXTENDED_BYTE_1 = 0x%02x\n", 0xff & regs[R_EB1]); + tda_reg("EXTENDED_BYTE_2 = 0x%02x\n", 0xff & regs[R_EB2]); + tda_reg("EXTENDED_BYTE_3 = 0x%02x\n", 0xff & regs[R_EB3]); + tda_reg("EXTENDED_BYTE_4 = 0x%02x\n", 0xff & regs[R_EB4]); + tda_reg("EXTENDED_BYTE_5 = 0x%02x\n", 0xff & regs[R_EB5]); + tda_reg("EXTENDED_BYTE_6 = 0x%02x\n", 0xff & regs[R_EB6]); + tda_reg("EXTENDED_BYTE_7 = 0x%02x\n", 0xff & regs[R_EB7]); + tda_reg("EXTENDED_BYTE_8 = 0x%02x\n", 0xff & regs[R_EB8]); + tda_reg("EXTENDED_BYTE_9 W = 0x%02x\n", 0xff & regs[R_EB9]); + tda_reg("EXTENDED_BYTE_10 = 0x%02x\n", 0xff & regs[R_EB10]); + tda_reg("EXTENDED_BYTE_11 = 0x%02x\n", 0xff & regs[R_EB11]); + tda_reg("EXTENDED_BYTE_12 = 0x%02x\n", 0xff & regs[R_EB12]); + tda_reg("EXTENDED_BYTE_13 = 0x%02x\n", 0xff & regs[R_EB13]); + tda_reg("EXTENDED_BYTE_14 = 0x%02x\n", 0xff & regs[R_EB14]); + tda_reg("EXTENDED_BYTE_15 = 0x%02x\n", 0xff & regs[R_EB15]); + tda_reg("EXTENDED_BYTE_16 W = 0x%02x\n", 0xff & regs[R_EB16]); + tda_reg("EXTENDED_BYTE_17 W = 0x%02x\n", 0xff & regs[R_EB17]); + tda_reg("EXTENDED_BYTE_18 = 0x%02x\n", 0xff & regs[R_EB18]); + tda_reg("EXTENDED_BYTE_19 W = 0x%02x\n", 0xff & regs[R_EB19]); + tda_reg("EXTENDED_BYTE_20 W = 0x%02x\n", 0xff & regs[R_EB20]); + tda_reg("EXTENDED_BYTE_21 = 0x%02x\n", 0xff & regs[R_EB21]); + tda_reg("EXTENDED_BYTE_22 = 0x%02x\n", 0xff & regs[R_EB22]); + tda_reg("EXTENDED_BYTE_23 = 0x%02x\n", 0xff & regs[R_EB23]); +} + +int tda18271_read_regs(struct dvb_frontend *fe) +{ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + unsigned char buf = 0x00; + int ret; + struct i2c_msg msg[] = { + { .addr = priv->i2c_addr, .flags = 0, + .buf = &buf, .len = 1 }, + { .addr = priv->i2c_addr, .flags = I2C_M_RD, + .buf = regs, .len = 16 } + }; + + tda18271_i2c_gate_ctrl(fe, 1); + + /* read all registers */ + ret = i2c_transfer(priv->i2c_adap, msg, 2); + + tda18271_i2c_gate_ctrl(fe, 0); + + if (ret != 2) + tda_err("ERROR: i2c_transfer returned: %d\n", ret); + + if (tda18271_debug & DBG_REG) + tda18271_dump_regs(fe, 0); + + return (ret == 2 ? 0 : ret); +} + +int tda18271_read_extended(struct dvb_frontend *fe) +{ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + unsigned char regdump[TDA18271_NUM_REGS]; + unsigned char buf = 0x00; + int ret, i; + struct i2c_msg msg[] = { + { .addr = priv->i2c_addr, .flags = 0, + .buf = &buf, .len = 1 }, + { .addr = priv->i2c_addr, .flags = I2C_M_RD, + .buf = regdump, .len = TDA18271_NUM_REGS } + }; + + tda18271_i2c_gate_ctrl(fe, 1); + + /* read all registers */ + ret = i2c_transfer(priv->i2c_adap, msg, 2); + + tda18271_i2c_gate_ctrl(fe, 0); + + if (ret != 2) + tda_err("ERROR: i2c_transfer returned: %d\n", ret); + + for (i = 0; i <= TDA18271_NUM_REGS; i++) { + /* don't update write-only registers */ + if ((i != R_EB9) && + (i != R_EB16) && + (i != R_EB17) && + (i != R_EB19) && + (i != R_EB20)) + regs[i] = regdump[i]; + } + + if (tda18271_debug & DBG_REG) + tda18271_dump_regs(fe, 1); + + return (ret == 2 ? 0 : ret); +} + +int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len) +{ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + unsigned char buf[TDA18271_NUM_REGS + 1]; + struct i2c_msg msg = { .addr = priv->i2c_addr, .flags = 0, + .buf = buf, .len = len + 1 }; + int i, ret; + + BUG_ON((len == 0) || (idx + len > sizeof(buf))); + + buf[0] = idx; + for (i = 1; i <= len; i++) + buf[i] = regs[idx - 1 + i]; + + tda18271_i2c_gate_ctrl(fe, 1); + + /* write registers */ + ret = i2c_transfer(priv->i2c_adap, &msg, 1); + + tda18271_i2c_gate_ctrl(fe, 0); + + if (ret != 1) + tda_err("ERROR: i2c_transfer returned: %d\n", ret); + + return (ret == 1 ? 0 : ret); +} + +/*---------------------------------------------------------------------*/ + +int tda18271_init_regs(struct dvb_frontend *fe) +{ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + + tda_dbg("initializing registers for device @ %d-%04x\n", + i2c_adapter_id(priv->i2c_adap), priv->i2c_addr); + + /* initialize registers */ + switch (priv->id) { + case TDA18271HDC1: + regs[R_ID] = 0x83; + break; + case TDA18271HDC2: + regs[R_ID] = 0x84; + break; + }; + + regs[R_TM] = 0x08; + regs[R_PL] = 0x80; + regs[R_EP1] = 0xc6; + regs[R_EP2] = 0xdf; + regs[R_EP3] = 0x16; + regs[R_EP4] = 0x60; + regs[R_EP5] = 0x80; + regs[R_CPD] = 0x80; + regs[R_CD1] = 0x00; + regs[R_CD2] = 0x00; + regs[R_CD3] = 0x00; + regs[R_MPD] = 0x00; + regs[R_MD1] = 0x00; + regs[R_MD2] = 0x00; + regs[R_MD3] = 0x00; + + switch (priv->id) { + case TDA18271HDC1: + regs[R_EB1] = 0xff; + break; + case TDA18271HDC2: + regs[R_EB1] = 0xfc; + break; + }; + + regs[R_EB2] = 0x01; + regs[R_EB3] = 0x84; + regs[R_EB4] = 0x41; + regs[R_EB5] = 0x01; + regs[R_EB6] = 0x84; + regs[R_EB7] = 0x40; + regs[R_EB8] = 0x07; + regs[R_EB9] = 0x00; + regs[R_EB10] = 0x00; + regs[R_EB11] = 0x96; + + switch (priv->id) { + case TDA18271HDC1: + regs[R_EB12] = 0x0f; + break; + case TDA18271HDC2: + regs[R_EB12] = 0x33; + break; + }; + + regs[R_EB13] = 0xc1; + regs[R_EB14] = 0x00; + regs[R_EB15] = 0x8f; + regs[R_EB16] = 0x00; + regs[R_EB17] = 0x00; + + switch (priv->id) { + case TDA18271HDC1: + regs[R_EB18] = 0x00; + break; + case TDA18271HDC2: + regs[R_EB18] = 0x8c; + break; + }; + + regs[R_EB19] = 0x00; + regs[R_EB20] = 0x20; + + switch (priv->id) { + case TDA18271HDC1: + regs[R_EB21] = 0x33; + break; + case TDA18271HDC2: + regs[R_EB21] = 0xb3; + break; + }; + + regs[R_EB22] = 0x48; + regs[R_EB23] = 0xb0; + + tda18271_write_regs(fe, 0x00, TDA18271_NUM_REGS); + + /* setup agc1 gain */ + regs[R_EB17] = 0x00; + tda18271_write_regs(fe, R_EB17, 1); + regs[R_EB17] = 0x03; + tda18271_write_regs(fe, R_EB17, 1); + regs[R_EB17] = 0x43; + tda18271_write_regs(fe, R_EB17, 1); + regs[R_EB17] = 0x4c; + tda18271_write_regs(fe, R_EB17, 1); + + /* setup agc2 gain */ + if ((priv->id) == TDA18271HDC1) { + regs[R_EB20] = 0xa0; + tda18271_write_regs(fe, R_EB20, 1); + regs[R_EB20] = 0xa7; + tda18271_write_regs(fe, R_EB20, 1); + regs[R_EB20] = 0xe7; + tda18271_write_regs(fe, R_EB20, 1); + regs[R_EB20] = 0xec; + tda18271_write_regs(fe, R_EB20, 1); + } + + /* image rejection calibration */ + + /* low-band */ + regs[R_EP3] = 0x1f; + regs[R_EP4] = 0x66; + regs[R_EP5] = 0x81; + regs[R_CPD] = 0xcc; + regs[R_CD1] = 0x6c; + regs[R_CD2] = 0x00; + regs[R_CD3] = 0x00; + regs[R_MPD] = 0xcd; + regs[R_MD1] = 0x77; + regs[R_MD2] = 0x08; + regs[R_MD3] = 0x00; + + switch (priv->id) { + case TDA18271HDC1: + tda18271_write_regs(fe, R_EP3, 11); + break; + case TDA18271HDC2: + tda18271_write_regs(fe, R_EP3, 12); + break; + }; + + if ((priv->id) == TDA18271HDC2) { + /* main pll cp source on */ + regs[R_EB4] = 0x61; + tda18271_write_regs(fe, R_EB4, 1); + msleep(1); + + /* main pll cp source off */ + regs[R_EB4] = 0x41; + tda18271_write_regs(fe, R_EB4, 1); + } + + msleep(5); /* pll locking */ + + /* launch detector */ + tda18271_write_regs(fe, R_EP1, 1); + msleep(5); /* wanted low measurement */ + + regs[R_EP5] = 0x85; + regs[R_CPD] = 0xcb; + regs[R_CD1] = 0x66; + regs[R_CD2] = 0x70; + + tda18271_write_regs(fe, R_EP3, 7); + msleep(5); /* pll locking */ + + /* launch optimization algorithm */ + tda18271_write_regs(fe, R_EP2, 1); + msleep(30); /* image low optimization completion */ + + /* mid-band */ + regs[R_EP5] = 0x82; + regs[R_CPD] = 0xa8; + regs[R_CD2] = 0x00; + regs[R_MPD] = 0xa9; + regs[R_MD1] = 0x73; + regs[R_MD2] = 0x1a; + + tda18271_write_regs(fe, R_EP3, 11); + msleep(5); /* pll locking */ + + tda18271_write_regs(fe, R_EP1, 1); + msleep(5); /* wanted mid measurement */ + + regs[R_EP5] = 0x86; + regs[R_CPD] = 0xa8; + regs[R_CD1] = 0x66; + regs[R_CD2] = 0xa0; + + tda18271_write_regs(fe, R_EP3, 7); + msleep(5); /* pll locking */ + + /* launch optimization algorithm */ + tda18271_write_regs(fe, R_EP2, 1); + msleep(30); /* image mid optimization completion */ + + /* high-band */ + regs[R_EP5] = 0x83; + regs[R_CPD] = 0x98; + regs[R_CD1] = 0x65; + regs[R_CD2] = 0x00; + regs[R_MPD] = 0x99; + regs[R_MD1] = 0x71; + regs[R_MD2] = 0xcd; + + tda18271_write_regs(fe, R_EP3, 11); + msleep(5); /* pll locking */ + + /* launch detector */ + tda18271_write_regs(fe, R_EP1, 1); + msleep(5); /* wanted high measurement */ + + regs[R_EP5] = 0x87; + regs[R_CD1] = 0x65; + regs[R_CD2] = 0x50; + + tda18271_write_regs(fe, R_EP3, 7); + msleep(5); /* pll locking */ + + /* launch optimization algorithm */ + tda18271_write_regs(fe, R_EP2, 1); + msleep(30); /* image high optimization completion */ + + /* return to normal mode */ + regs[R_EP4] = 0x64; + tda18271_write_regs(fe, R_EP4, 1); + + /* synchronize */ + tda18271_write_regs(fe, R_EP1, 1); + + return 0; +} + +/*---------------------------------------------------------------------*/ + +int tda18271_calc_main_pll(struct dvb_frontend *fe, u32 freq) +{ + /* sets main post divider & divider bytes, but does not write them */ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + u8 d, pd; + u32 div; + + int ret = tda18271_lookup_pll_map(fe, MAIN_PLL, &freq, &pd, &d); + if (ret < 0) + goto fail; + + regs[R_MPD] = (0x77 & pd); + + switch (priv->mode) { + case TDA18271_ANALOG: + regs[R_MPD] &= ~0x08; + break; + case TDA18271_DIGITAL: + regs[R_MPD] |= 0x08; + break; + } + + div = ((d * (freq / 1000)) << 7) / 125; + + regs[R_MD1] = 0x7f & (div >> 16); + regs[R_MD2] = 0xff & (div >> 8); + regs[R_MD3] = 0xff & div; +fail: + return ret; +} + +int tda18271_calc_cal_pll(struct dvb_frontend *fe, u32 freq) +{ + /* sets cal post divider & divider bytes, but does not write them */ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + u8 d, pd; + u32 div; + + int ret = tda18271_lookup_pll_map(fe, CAL_PLL, &freq, &pd, &d); + if (ret < 0) + goto fail; + + regs[R_CPD] = pd; + + div = ((d * (freq / 1000)) << 7) / 125; + + regs[R_CD1] = 0x7f & (div >> 16); + regs[R_CD2] = 0xff & (div >> 8); + regs[R_CD3] = 0xff & div; +fail: + return ret; +} + +/*---------------------------------------------------------------------*/ + +int tda18271_calc_bp_filter(struct dvb_frontend *fe, u32 *freq) +{ + /* sets bp filter bits, but does not write them */ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + u8 val; + + int ret = tda18271_lookup_map(fe, BP_FILTER, freq, &val); + if (ret < 0) + goto fail; + + regs[R_EP1] &= ~0x07; /* clear bp filter bits */ + regs[R_EP1] |= (0x07 & val); +fail: + return ret; +} + +int tda18271_calc_km(struct dvb_frontend *fe, u32 *freq) +{ + /* sets K & M bits, but does not write them */ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + u8 val; + + int ret = tda18271_lookup_map(fe, RF_CAL_KMCO, freq, &val); + if (ret < 0) + goto fail; + + regs[R_EB13] &= ~0x7c; /* clear k & m bits */ + regs[R_EB13] |= (0x7c & val); +fail: + return ret; +} + +int tda18271_calc_rf_band(struct dvb_frontend *fe, u32 *freq) +{ + /* sets rf band bits, but does not write them */ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + u8 val; + + int ret = tda18271_lookup_map(fe, RF_BAND, freq, &val); + if (ret < 0) + goto fail; + + regs[R_EP2] &= ~0xe0; /* clear rf band bits */ + regs[R_EP2] |= (0xe0 & (val << 5)); +fail: + return ret; +} + +int tda18271_calc_gain_taper(struct dvb_frontend *fe, u32 *freq) +{ + /* sets gain taper bits, but does not write them */ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + u8 val; + + int ret = tda18271_lookup_map(fe, GAIN_TAPER, freq, &val); + if (ret < 0) + goto fail; + + regs[R_EP2] &= ~0x1f; /* clear gain taper bits */ + regs[R_EP2] |= (0x1f & val); +fail: + return ret; +} + +int tda18271_calc_ir_measure(struct dvb_frontend *fe, u32 *freq) +{ + /* sets IR Meas bits, but does not write them */ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + u8 val; + + int ret = tda18271_lookup_map(fe, IR_MEASURE, freq, &val); + if (ret < 0) + goto fail; + + regs[R_EP5] &= ~0x07; + regs[R_EP5] |= (0x07 & val); +fail: + return ret; +} + +int tda18271_calc_rf_cal(struct dvb_frontend *fe, u32 *freq) +{ + /* sets rf cal byte (RFC_Cprog), but does not write it */ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + u8 val; + + int ret = tda18271_lookup_map(fe, RF_CAL, freq, &val); + if (ret < 0) + goto fail; + + regs[R_EB14] = val; +fail: + return ret; +} + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * --------------------------------------------------------------------------- + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index 4b53baf12efc..537d520de22f 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -1,7 +1,7 @@ /* tda18271-fe.c - driver for the Philips / NXP TDA18271 silicon tuner - Copyright (C) 2007 Michael Krufky (mkrufky@linuxtv.org) + Copyright (C) 2007, 2008 Michael Krufky This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -28,431 +28,6 @@ MODULE_PARM_DESC(debug, "set debug level (info=1, map=2, reg=4 (or-able))"); /*---------------------------------------------------------------------*/ -static int tda18271_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) -{ - struct tda18271_priv *priv = fe->tuner_priv; - enum tda18271_i2c_gate gate; - int ret = 0; - - switch (priv->gate) { - case TDA18271_GATE_DIGITAL: - case TDA18271_GATE_ANALOG: - gate = priv->gate; - break; - case TDA18271_GATE_AUTO: - default: - switch (priv->mode) { - case TDA18271_DIGITAL: - gate = TDA18271_GATE_DIGITAL; - break; - case TDA18271_ANALOG: - default: - gate = TDA18271_GATE_ANALOG; - break; - } - } - - switch (gate) { - case TDA18271_GATE_ANALOG: - if (fe->ops.analog_ops.i2c_gate_ctrl) - ret = fe->ops.analog_ops.i2c_gate_ctrl(fe, enable); - break; - case TDA18271_GATE_DIGITAL: - if (fe->ops.i2c_gate_ctrl) - ret = fe->ops.i2c_gate_ctrl(fe, enable); - break; - default: - ret = -EINVAL; - break; - } - - return ret; -}; - -/*---------------------------------------------------------------------*/ - -static void tda18271_dump_regs(struct dvb_frontend *fe, int extended) -{ - struct tda18271_priv *priv = fe->tuner_priv; - unsigned char *regs = priv->tda18271_regs; - - tda_reg("=== TDA18271 REG DUMP ===\n"); - tda_reg("ID_BYTE = 0x%02x\n", 0xff & regs[R_ID]); - tda_reg("THERMO_BYTE = 0x%02x\n", 0xff & regs[R_TM]); - tda_reg("POWER_LEVEL_BYTE = 0x%02x\n", 0xff & regs[R_PL]); - tda_reg("EASY_PROG_BYTE_1 = 0x%02x\n", 0xff & regs[R_EP1]); - tda_reg("EASY_PROG_BYTE_2 = 0x%02x\n", 0xff & regs[R_EP2]); - tda_reg("EASY_PROG_BYTE_3 = 0x%02x\n", 0xff & regs[R_EP3]); - tda_reg("EASY_PROG_BYTE_4 = 0x%02x\n", 0xff & regs[R_EP4]); - tda_reg("EASY_PROG_BYTE_5 = 0x%02x\n", 0xff & regs[R_EP5]); - tda_reg("CAL_POST_DIV_BYTE = 0x%02x\n", 0xff & regs[R_CPD]); - tda_reg("CAL_DIV_BYTE_1 = 0x%02x\n", 0xff & regs[R_CD1]); - tda_reg("CAL_DIV_BYTE_2 = 0x%02x\n", 0xff & regs[R_CD2]); - tda_reg("CAL_DIV_BYTE_3 = 0x%02x\n", 0xff & regs[R_CD3]); - tda_reg("MAIN_POST_DIV_BYTE = 0x%02x\n", 0xff & regs[R_MPD]); - tda_reg("MAIN_DIV_BYTE_1 = 0x%02x\n", 0xff & regs[R_MD1]); - tda_reg("MAIN_DIV_BYTE_2 = 0x%02x\n", 0xff & regs[R_MD2]); - tda_reg("MAIN_DIV_BYTE_3 = 0x%02x\n", 0xff & regs[R_MD3]); - - /* only dump extended regs if DBG_ADV is set */ - if (!(tda18271_debug & DBG_ADV)) - return; - - /* W indicates write-only registers. - * Register dump for write-only registers shows last value written. */ - - tda_reg("EXTENDED_BYTE_1 = 0x%02x\n", 0xff & regs[R_EB1]); - tda_reg("EXTENDED_BYTE_2 = 0x%02x\n", 0xff & regs[R_EB2]); - tda_reg("EXTENDED_BYTE_3 = 0x%02x\n", 0xff & regs[R_EB3]); - tda_reg("EXTENDED_BYTE_4 = 0x%02x\n", 0xff & regs[R_EB4]); - tda_reg("EXTENDED_BYTE_5 = 0x%02x\n", 0xff & regs[R_EB5]); - tda_reg("EXTENDED_BYTE_6 = 0x%02x\n", 0xff & regs[R_EB6]); - tda_reg("EXTENDED_BYTE_7 = 0x%02x\n", 0xff & regs[R_EB7]); - tda_reg("EXTENDED_BYTE_8 = 0x%02x\n", 0xff & regs[R_EB8]); - tda_reg("EXTENDED_BYTE_9 W = 0x%02x\n", 0xff & regs[R_EB9]); - tda_reg("EXTENDED_BYTE_10 = 0x%02x\n", 0xff & regs[R_EB10]); - tda_reg("EXTENDED_BYTE_11 = 0x%02x\n", 0xff & regs[R_EB11]); - tda_reg("EXTENDED_BYTE_12 = 0x%02x\n", 0xff & regs[R_EB12]); - tda_reg("EXTENDED_BYTE_13 = 0x%02x\n", 0xff & regs[R_EB13]); - tda_reg("EXTENDED_BYTE_14 = 0x%02x\n", 0xff & regs[R_EB14]); - tda_reg("EXTENDED_BYTE_15 = 0x%02x\n", 0xff & regs[R_EB15]); - tda_reg("EXTENDED_BYTE_16 W = 0x%02x\n", 0xff & regs[R_EB16]); - tda_reg("EXTENDED_BYTE_17 W = 0x%02x\n", 0xff & regs[R_EB17]); - tda_reg("EXTENDED_BYTE_18 = 0x%02x\n", 0xff & regs[R_EB18]); - tda_reg("EXTENDED_BYTE_19 W = 0x%02x\n", 0xff & regs[R_EB19]); - tda_reg("EXTENDED_BYTE_20 W = 0x%02x\n", 0xff & regs[R_EB20]); - tda_reg("EXTENDED_BYTE_21 = 0x%02x\n", 0xff & regs[R_EB21]); - tda_reg("EXTENDED_BYTE_22 = 0x%02x\n", 0xff & regs[R_EB22]); - tda_reg("EXTENDED_BYTE_23 = 0x%02x\n", 0xff & regs[R_EB23]); -} - -static void tda18271_read_regs(struct dvb_frontend *fe) -{ - struct tda18271_priv *priv = fe->tuner_priv; - unsigned char *regs = priv->tda18271_regs; - unsigned char buf = 0x00; - int ret; - struct i2c_msg msg[] = { - { .addr = priv->i2c_addr, .flags = 0, - .buf = &buf, .len = 1 }, - { .addr = priv->i2c_addr, .flags = I2C_M_RD, - .buf = regs, .len = 16 } - }; - - tda18271_i2c_gate_ctrl(fe, 1); - - /* read all registers */ - ret = i2c_transfer(priv->i2c_adap, msg, 2); - - tda18271_i2c_gate_ctrl(fe, 0); - - if (ret != 2) - tda_err("ERROR: i2c_transfer returned: %d\n", ret); - - if (tda18271_debug & DBG_REG) - tda18271_dump_regs(fe, 0); -} - -static void tda18271_read_extended(struct dvb_frontend *fe) -{ - struct tda18271_priv *priv = fe->tuner_priv; - unsigned char *regs = priv->tda18271_regs; - unsigned char regdump[TDA18271_NUM_REGS]; - unsigned char buf = 0x00; - int ret, i; - struct i2c_msg msg[] = { - { .addr = priv->i2c_addr, .flags = 0, - .buf = &buf, .len = 1 }, - { .addr = priv->i2c_addr, .flags = I2C_M_RD, - .buf = regdump, .len = TDA18271_NUM_REGS } - }; - - tda18271_i2c_gate_ctrl(fe, 1); - - /* read all registers */ - ret = i2c_transfer(priv->i2c_adap, msg, 2); - - tda18271_i2c_gate_ctrl(fe, 0); - - if (ret != 2) - tda_err("ERROR: i2c_transfer returned: %d\n", ret); - - for (i = 0; i <= TDA18271_NUM_REGS; i++) { - /* don't update write-only registers */ - if ((i != R_EB9) && - (i != R_EB16) && - (i != R_EB17) && - (i != R_EB19) && - (i != R_EB20)) - regs[i] = regdump[i]; - } - - if (tda18271_debug & DBG_REG) - tda18271_dump_regs(fe, 1); -} - -static void tda18271_write_regs(struct dvb_frontend *fe, int idx, int len) -{ - struct tda18271_priv *priv = fe->tuner_priv; - unsigned char *regs = priv->tda18271_regs; - unsigned char buf[TDA18271_NUM_REGS+1]; - struct i2c_msg msg = { .addr = priv->i2c_addr, .flags = 0, - .buf = buf, .len = len+1 }; - int i, ret; - - BUG_ON((len == 0) || (idx+len > sizeof(buf))); - - buf[0] = idx; - for (i = 1; i <= len; i++) { - buf[i] = regs[idx-1+i]; - } - - tda18271_i2c_gate_ctrl(fe, 1); - - /* write registers */ - ret = i2c_transfer(priv->i2c_adap, &msg, 1); - - tda18271_i2c_gate_ctrl(fe, 0); - - if (ret != 1) - tda_err("ERROR: i2c_transfer returned: %d\n", ret); -} - -/*---------------------------------------------------------------------*/ - -static int tda18271_init_regs(struct dvb_frontend *fe) -{ - struct tda18271_priv *priv = fe->tuner_priv; - unsigned char *regs = priv->tda18271_regs; - - tda_dbg("initializing registers for device @ %d-%04x\n", - i2c_adapter_id(priv->i2c_adap), priv->i2c_addr); - - /* initialize registers */ - switch (priv->id) { - case TDA18271HDC1: - regs[R_ID] = 0x83; - break; - case TDA18271HDC2: - regs[R_ID] = 0x84; - break; - }; - - regs[R_TM] = 0x08; - regs[R_PL] = 0x80; - regs[R_EP1] = 0xc6; - regs[R_EP2] = 0xdf; - regs[R_EP3] = 0x16; - regs[R_EP4] = 0x60; - regs[R_EP5] = 0x80; - regs[R_CPD] = 0x80; - regs[R_CD1] = 0x00; - regs[R_CD2] = 0x00; - regs[R_CD3] = 0x00; - regs[R_MPD] = 0x00; - regs[R_MD1] = 0x00; - regs[R_MD2] = 0x00; - regs[R_MD3] = 0x00; - - switch (priv->id) { - case TDA18271HDC1: - regs[R_EB1] = 0xff; - break; - case TDA18271HDC2: - regs[R_EB1] = 0xfc; - break; - }; - - regs[R_EB2] = 0x01; - regs[R_EB3] = 0x84; - regs[R_EB4] = 0x41; - regs[R_EB5] = 0x01; - regs[R_EB6] = 0x84; - regs[R_EB7] = 0x40; - regs[R_EB8] = 0x07; - regs[R_EB9] = 0x00; - regs[R_EB10] = 0x00; - regs[R_EB11] = 0x96; - - switch (priv->id) { - case TDA18271HDC1: - regs[R_EB12] = 0x0f; - break; - case TDA18271HDC2: - regs[R_EB12] = 0x33; - break; - }; - - regs[R_EB13] = 0xc1; - regs[R_EB14] = 0x00; - regs[R_EB15] = 0x8f; - regs[R_EB16] = 0x00; - regs[R_EB17] = 0x00; - - switch (priv->id) { - case TDA18271HDC1: - regs[R_EB18] = 0x00; - break; - case TDA18271HDC2: - regs[R_EB18] = 0x8c; - break; - }; - - regs[R_EB19] = 0x00; - regs[R_EB20] = 0x20; - - switch (priv->id) { - case TDA18271HDC1: - regs[R_EB21] = 0x33; - break; - case TDA18271HDC2: - regs[R_EB21] = 0xb3; - break; - }; - - regs[R_EB22] = 0x48; - regs[R_EB23] = 0xb0; - - tda18271_write_regs(fe, 0x00, TDA18271_NUM_REGS); - - /* setup agc1 gain */ - regs[R_EB17] = 0x00; - tda18271_write_regs(fe, R_EB17, 1); - regs[R_EB17] = 0x03; - tda18271_write_regs(fe, R_EB17, 1); - regs[R_EB17] = 0x43; - tda18271_write_regs(fe, R_EB17, 1); - regs[R_EB17] = 0x4c; - tda18271_write_regs(fe, R_EB17, 1); - - /* setup agc2 gain */ - if ((priv->id) == TDA18271HDC1) { - regs[R_EB20] = 0xa0; - tda18271_write_regs(fe, R_EB20, 1); - regs[R_EB20] = 0xa7; - tda18271_write_regs(fe, R_EB20, 1); - regs[R_EB20] = 0xe7; - tda18271_write_regs(fe, R_EB20, 1); - regs[R_EB20] = 0xec; - tda18271_write_regs(fe, R_EB20, 1); - } - - /* image rejection calibration */ - - /* low-band */ - regs[R_EP3] = 0x1f; - regs[R_EP4] = 0x66; - regs[R_EP5] = 0x81; - regs[R_CPD] = 0xcc; - regs[R_CD1] = 0x6c; - regs[R_CD2] = 0x00; - regs[R_CD3] = 0x00; - regs[R_MPD] = 0xcd; - regs[R_MD1] = 0x77; - regs[R_MD2] = 0x08; - regs[R_MD3] = 0x00; - - switch (priv->id) { - case TDA18271HDC1: - tda18271_write_regs(fe, R_EP3, 11); - break; - case TDA18271HDC2: - tda18271_write_regs(fe, R_EP3, 12); - break; - }; - - if ((priv->id) == TDA18271HDC2) { - /* main pll cp source on */ - regs[R_EB4] = 0x61; - tda18271_write_regs(fe, R_EB4, 1); - msleep(1); - - /* main pll cp source off */ - regs[R_EB4] = 0x41; - tda18271_write_regs(fe, R_EB4, 1); - } - - msleep(5); /* pll locking */ - - /* launch detector */ - tda18271_write_regs(fe, R_EP1, 1); - msleep(5); /* wanted low measurement */ - - regs[R_EP5] = 0x85; - regs[R_CPD] = 0xcb; - regs[R_CD1] = 0x66; - regs[R_CD2] = 0x70; - - tda18271_write_regs(fe, R_EP3, 7); - msleep(5); /* pll locking */ - - /* launch optimization algorithm */ - tda18271_write_regs(fe, R_EP2, 1); - msleep(30); /* image low optimization completion */ - - /* mid-band */ - regs[R_EP5] = 0x82; - regs[R_CPD] = 0xa8; - regs[R_CD2] = 0x00; - regs[R_MPD] = 0xa9; - regs[R_MD1] = 0x73; - regs[R_MD2] = 0x1a; - - tda18271_write_regs(fe, R_EP3, 11); - msleep(5); /* pll locking */ - - tda18271_write_regs(fe, R_EP1, 1); - msleep(5); /* wanted mid measurement */ - - regs[R_EP5] = 0x86; - regs[R_CPD] = 0xa8; - regs[R_CD1] = 0x66; - regs[R_CD2] = 0xa0; - - tda18271_write_regs(fe, R_EP3, 7); - msleep(5); /* pll locking */ - - /* launch optimization algorithm */ - tda18271_write_regs(fe, R_EP2, 1); - msleep(30); /* image mid optimization completion */ - - /* high-band */ - regs[R_EP5] = 0x83; - regs[R_CPD] = 0x98; - regs[R_CD1] = 0x65; - regs[R_CD2] = 0x00; - regs[R_MPD] = 0x99; - regs[R_MD1] = 0x71; - regs[R_MD2] = 0xcd; - - tda18271_write_regs(fe, R_EP3, 11); - msleep(5); /* pll locking */ - - /* launch detector */ - tda18271_write_regs(fe, R_EP1, 1); - msleep(5); /* wanted high measurement */ - - regs[R_EP5] = 0x87; - regs[R_CD1] = 0x65; - regs[R_CD2] = 0x50; - - tda18271_write_regs(fe, R_EP3, 7); - msleep(5); /* pll locking */ - - /* launch optimization algorithm */ - tda18271_write_regs(fe, R_EP2, 1); - msleep(30); /* image high optimization completion */ - - /* return to normal mode */ - regs[R_EP4] = 0x64; - tda18271_write_regs(fe, R_EP4, 1); - - /* synchronize */ - tda18271_write_regs(fe, R_EP1, 1); - - return 0; -} - static int tda18271_init(struct dvb_frontend *fe) { struct tda18271_priv *priv = fe->tuner_priv; @@ -467,162 +42,6 @@ static int tda18271_init(struct dvb_frontend *fe) return 0; } -static int tda18271_calc_main_pll(struct dvb_frontend *fe, u32 freq) -{ - /* Sets Main Post-Divider & Divider bytes, but does not write them */ - struct tda18271_priv *priv = fe->tuner_priv; - unsigned char *regs = priv->tda18271_regs; - u8 d, pd; - u32 div; - - int ret = tda18271_lookup_pll_map(fe, MAIN_PLL, &freq, &pd, &d); - if (ret < 0) - goto fail; - - regs[R_MPD] = (0x77 & pd); - - switch (priv->mode) { - case TDA18271_ANALOG: - regs[R_MPD] &= ~0x08; - break; - case TDA18271_DIGITAL: - regs[R_MPD] |= 0x08; - break; - } - - div = ((d * (freq / 1000)) << 7) / 125; - - regs[R_MD1] = 0x7f & (div >> 16); - regs[R_MD2] = 0xff & (div >> 8); - regs[R_MD3] = 0xff & div; -fail: - return ret; -} - -static int tda18271_calc_cal_pll(struct dvb_frontend *fe, u32 freq) -{ - /* Sets Cal Post-Divider & Divider bytes, but does not write them */ - struct tda18271_priv *priv = fe->tuner_priv; - unsigned char *regs = priv->tda18271_regs; - u8 d, pd; - u32 div; - - int ret = tda18271_lookup_pll_map(fe, CAL_PLL, &freq, &pd, &d); - if (ret < 0) - goto fail; - - regs[R_CPD] = pd; - - div = ((d * (freq / 1000)) << 7) / 125; - - regs[R_CD1] = 0x7f & (div >> 16); - regs[R_CD2] = 0xff & (div >> 8); - regs[R_CD3] = 0xff & div; -fail: - return ret; -} - -static int tda18271_calc_bp_filter(struct dvb_frontend *fe, u32 *freq) -{ - /* Sets BP filter bits, but does not write them */ - struct tda18271_priv *priv = fe->tuner_priv; - unsigned char *regs = priv->tda18271_regs; - u8 val; - - int ret = tda18271_lookup_map(fe, BP_FILTER, freq, &val); - if (ret < 0) - goto fail; - - regs[R_EP1] &= ~0x07; /* clear bp filter bits */ - regs[R_EP1] |= (0x07 & val); -fail: - return ret; -} - -static int tda18271_calc_km(struct dvb_frontend *fe, u32 *freq) -{ - /* Sets K & M bits, but does not write them */ - struct tda18271_priv *priv = fe->tuner_priv; - unsigned char *regs = priv->tda18271_regs; - u8 val; - - int ret = tda18271_lookup_map(fe, RF_CAL_KMCO, freq, &val); - if (ret < 0) - goto fail; - - regs[R_EB13] &= ~0x7c; /* clear k & m bits */ - regs[R_EB13] |= (0x7c & val); -fail: - return ret; -} - -static int tda18271_calc_rf_band(struct dvb_frontend *fe, u32 *freq) -{ - /* Sets RF Band bits, but does not write them */ - struct tda18271_priv *priv = fe->tuner_priv; - unsigned char *regs = priv->tda18271_regs; - u8 val; - - int ret = tda18271_lookup_map(fe, RF_BAND, freq, &val); - if (ret < 0) - goto fail; - - regs[R_EP2] &= ~0xe0; /* clear rf band bits */ - regs[R_EP2] |= (0xe0 & (val << 5)); -fail: - return ret; -} - -static int tda18271_calc_gain_taper(struct dvb_frontend *fe, u32 *freq) -{ - /* Sets Gain Taper bits, but does not write them */ - struct tda18271_priv *priv = fe->tuner_priv; - unsigned char *regs = priv->tda18271_regs; - u8 val; - - int ret = tda18271_lookup_map(fe, GAIN_TAPER, freq, &val); - if (ret < 0) - goto fail; - - regs[R_EP2] &= ~0x1f; /* clear gain taper bits */ - regs[R_EP2] |= (0x1f & val); -fail: - return ret; -} - -static int tda18271_calc_ir_measure(struct dvb_frontend *fe, u32 *freq) -{ - /* Sets IR Meas bits, but does not write them */ - struct tda18271_priv *priv = fe->tuner_priv; - unsigned char *regs = priv->tda18271_regs; - u8 val; - - int ret = tda18271_lookup_map(fe, IR_MEASURE, freq, &val); - if (ret < 0) - goto fail; - - regs[R_EP5] &= ~0x07; - regs[R_EP5] |= (0x07 & val); -fail: - return ret; -} - -static int tda18271_calc_rf_cal(struct dvb_frontend *fe, u32 *freq) -{ - /* Sets RF Cal bits, but does not write them */ - struct tda18271_priv *priv = fe->tuner_priv; - unsigned char *regs = priv->tda18271_regs; - u8 val; - - int ret = tda18271_lookup_map(fe, RF_CAL, freq, &val); - if (ret < 0) - goto fail; - - regs[R_EB14] = val; -fail: - return ret; -} - /* ------------------------------------------------------------------ */ static int tda18271_channel_configuration(struct dvb_frontend *fe, diff --git a/drivers/media/dvb/frontends/tda18271-priv.h b/drivers/media/dvb/frontends/tda18271-priv.h index 8552c6ae0d1f..deb375ea253e 100644 --- a/drivers/media/dvb/frontends/tda18271-priv.h +++ b/drivers/media/dvb/frontends/tda18271-priv.h @@ -1,7 +1,7 @@ /* tda18271-priv.h - private header for the NXP TDA18271 silicon tuner - Copyright (C) 2007 Michael Krufky (mkrufky@linuxtv.org) + Copyright (C) 2007, 2008 Michael Krufky This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -196,6 +196,23 @@ extern int tda18271_lookup_cid_target(struct dvb_frontend *fe, extern int tda18271_assign_map_layout(struct dvb_frontend *fe); +/*---------------------------------------------------------------------*/ + +extern int tda18271_read_regs(struct dvb_frontend *fe); +extern int tda18271_read_extended(struct dvb_frontend *fe); +extern int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len); +extern int tda18271_init_regs(struct dvb_frontend *fe); + +extern int tda18271_calc_main_pll(struct dvb_frontend *fe, u32 freq); +extern int tda18271_calc_cal_pll(struct dvb_frontend *fe, u32 freq); + +extern int tda18271_calc_bp_filter(struct dvb_frontend *fe, u32 *freq); +extern int tda18271_calc_km(struct dvb_frontend *fe, u32 *freq); +extern int tda18271_calc_rf_band(struct dvb_frontend *fe, u32 *freq); +extern int tda18271_calc_gain_taper(struct dvb_frontend *fe, u32 *freq); +extern int tda18271_calc_ir_measure(struct dvb_frontend *fe, u32 *freq); +extern int tda18271_calc_rf_cal(struct dvb_frontend *fe, u32 *freq); + #endif /* __TDA18271_PRIV_H__ */ /* diff --git a/drivers/media/dvb/frontends/tda18271-tables.c b/drivers/media/dvb/frontends/tda18271-tables.c index 3042e5c873ef..46f1d4ddda34 100644 --- a/drivers/media/dvb/frontends/tda18271-tables.c +++ b/drivers/media/dvb/frontends/tda18271-tables.c @@ -1,7 +1,7 @@ /* tda18271-tables.c - driver for the Philips / NXP TDA18271 silicon tuner - Copyright (C) 2007 Michael Krufky (mkrufky@linuxtv.org) + Copyright (C) 2007, 2008 Michael Krufky This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/media/dvb/frontends/tda18271.h b/drivers/media/dvb/frontends/tda18271.h index b98a9331c590..f53568103311 100644 --- a/drivers/media/dvb/frontends/tda18271.h +++ b/drivers/media/dvb/frontends/tda18271.h @@ -1,7 +1,7 @@ /* tda18271.h - header for the Philips / NXP TDA18271 silicon tuner - Copyright (C) 2007 Michael Krufky (mkrufky@linuxtv.org) + Copyright (C) 2007, 2008 Michael Krufky This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by -- cgit v1.2.3-59-g8ed1b From f21e0d7f0513e743b14df3197fdeeb9a9b7edbb2 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 2 Jan 2008 03:01:54 -0300 Subject: V4L/DVB (6962): tda18271: allow device-specific configuration of IF frequency and std bits Allow drivers to pass device-specific configuration parameters during attach. If these parameters are omitted, default values will be used. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 82 +++++++++++++++++++++++++-- drivers/media/dvb/frontends/tda18271-priv.h | 23 +------- drivers/media/dvb/frontends/tda18271-tables.c | 18 +++--- drivers/media/dvb/frontends/tda18271.h | 30 +++++++++- drivers/media/video/cx23885/cx23885-dvb.c | 12 +++- drivers/media/video/tda8290.c | 6 +- 6 files changed, 131 insertions(+), 40 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index 537d520de22f..b17ab4ace08c 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -768,12 +768,12 @@ static int tda18271_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) { struct tda18271_priv *priv = fe->tuner_priv; - struct tda18271_std_map *std_map = priv->std; + struct tda18271_std_map *std_map = &priv->std; u8 std; u32 bw, sgIF = 0; u32 freq = params->frequency; - BUG_ON(!priv->tune || !priv->std); + BUG_ON(!priv->tune); priv->mode = TDA18271_DIGITAL; @@ -832,12 +832,12 @@ static int tda18271_set_analog_params(struct dvb_frontend *fe, struct analog_parameters *params) { struct tda18271_priv *priv = fe->tuner_priv; - struct tda18271_std_map *std_map = priv->std; + struct tda18271_std_map *std_map = &priv->std; char *mode; u8 std; u32 sgIF, freq = params->frequency * 62500; - BUG_ON(!priv->tune || !priv->std); + BUG_ON(!priv->tune); priv->mode = TDA18271_ANALOG; @@ -901,6 +901,69 @@ static int tda18271_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) return 0; } +/* ------------------------------------------------------------------ */ + +#define tda18271_update_std(std_cfg, name) do { \ + if (map->std_cfg.if_freq + map->std_cfg.std_bits > 0) { \ + tda_dbg("Using custom std config for %s\n", name); \ + memcpy(&std->std_cfg, &map->std_cfg, \ + sizeof(struct tda18271_std_map_item)); \ + } } while (0) + +#define tda18271_dump_std_item(std_cfg, name) do { \ + tda_dbg("(%s) if freq = %d, std bits = 0x%02x\n", \ + name, std->std_cfg.if_freq, std->std_cfg.std_bits); \ + } while (0) + +static int tda18271_dump_std_map(struct dvb_frontend *fe) +{ + struct tda18271_priv *priv = fe->tuner_priv; + struct tda18271_std_map *std = &priv->std; + + tda_dbg("========== STANDARD MAP SETTINGS ==========\n"); + tda18271_dump_std_item(atv_b, "pal b"); + tda18271_dump_std_item(atv_dk, "pal dk"); + tda18271_dump_std_item(atv_gh, "pal gh"); + tda18271_dump_std_item(atv_i, "pal i"); + tda18271_dump_std_item(atv_l, "pal l"); + tda18271_dump_std_item(atv_lc, "pal l'"); + tda18271_dump_std_item(atv_mn, "atv mn"); + tda18271_dump_std_item(atsc_6, "atsc 6"); + tda18271_dump_std_item(dvbt_6, "dvbt 6"); + tda18271_dump_std_item(dvbt_7, "dvbt 7"); + tda18271_dump_std_item(dvbt_8, "dvbt 8"); + tda18271_dump_std_item(qam_6, "qam 6"); + tda18271_dump_std_item(qam_8, "qam 8"); + + return 0; +} + +static int tda18271_update_std_map(struct dvb_frontend *fe, + struct tda18271_std_map *map) +{ + struct tda18271_priv *priv = fe->tuner_priv; + struct tda18271_std_map *std = &priv->std; + + if (!map) + return -EINVAL; + + tda18271_update_std(atv_b, "atv b"); + tda18271_update_std(atv_dk, "atv dk"); + tda18271_update_std(atv_gh, "atv gh"); + tda18271_update_std(atv_i, "atv i"); + tda18271_update_std(atv_l, "atv l"); + tda18271_update_std(atv_lc, "atv l'"); + tda18271_update_std(atv_mn, "atv mn"); + tda18271_update_std(atsc_6, "atsc 6"); + tda18271_update_std(dvbt_6, "dvbt 6"); + tda18271_update_std(dvbt_7, "dvbt 7"); + tda18271_update_std(dvbt_8, "dvbt 8"); + tda18271_update_std(qam_6, "qam 6"); + tda18271_update_std(qam_8, "qam 8"); + + return 0; +} + static int tda18271_get_id(struct dvb_frontend *fe) { struct tda18271_priv *priv = fe->tuner_priv; @@ -951,7 +1014,7 @@ static struct dvb_tuner_ops tda18271_tuner_ops = { struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, struct i2c_adapter *i2c, - enum tda18271_i2c_gate gate) + struct tda18271_config *cfg) { struct tda18271_priv *priv = NULL; @@ -961,7 +1024,7 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, priv->i2c_addr = addr; priv->i2c_adap = i2c; - priv->gate = gate; + priv->gate = (cfg) ? cfg->gate : TDA18271_GATE_AUTO; priv->cal_initialized = false; fe->tuner_priv = priv; @@ -975,6 +1038,13 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, memcpy(&fe->ops.tuner_ops, &tda18271_tuner_ops, sizeof(struct dvb_tuner_ops)); + /* override default std map with values in config struct */ + if ((cfg) && (cfg->std_map)) + tda18271_update_std_map(fe, cfg->std_map); + + if (tda18271_debug & DBG_MAP) + tda18271_dump_std_map(fe); + tda18271_init_regs(fe); return fe; diff --git a/drivers/media/dvb/frontends/tda18271-priv.h b/drivers/media/dvb/frontends/tda18271-priv.h index deb375ea253e..6e04258ca6f9 100644 --- a/drivers/media/dvb/frontends/tda18271-priv.h +++ b/drivers/media/dvb/frontends/tda18271-priv.h @@ -84,27 +84,6 @@ struct tda18271_rf_tracking_filter_cal { int rf_b2; }; -struct tda18271_std_map_item { - u32 if_freq; - u8 std_bits; -}; - -struct tda18271_std_map { - struct tda18271_std_map_item atv_b; - struct tda18271_std_map_item atv_dk; - struct tda18271_std_map_item atv_gh; - struct tda18271_std_map_item atv_i; - struct tda18271_std_map_item atv_l; - struct tda18271_std_map_item atv_lc; - struct tda18271_std_map_item atv_mn; - struct tda18271_std_map_item atsc_6; - struct tda18271_std_map_item dvbt_6; - struct tda18271_std_map_item dvbt_7; - struct tda18271_std_map_item dvbt_8; - struct tda18271_std_map_item qam_6; - struct tda18271_std_map_item qam_8; -}; - enum tda18271_mode { TDA18271_ANALOG, TDA18271_DIGITAL, @@ -128,8 +107,8 @@ struct tda18271_priv { unsigned int cal_initialized:1; - struct tda18271_std_map *std; struct tda18271_map_layout *maps; + struct tda18271_std_map std; struct tda18271_rf_tracking_filter_cal rf_cal_state[8]; int (*tune) (struct dvb_frontend *fe, diff --git a/drivers/media/dvb/frontends/tda18271-tables.c b/drivers/media/dvb/frontends/tda18271-tables.c index 46f1d4ddda34..2f8ea72bcabb 100644 --- a/drivers/media/dvb/frontends/tda18271-tables.c +++ b/drivers/media/dvb/frontends/tda18271-tables.c @@ -1194,11 +1194,11 @@ static struct tda18271_std_map tda18271c1_std_map = { .atv_l = { .if_freq = 7750000, .std_bits = 0x0f }, .atv_lc = { .if_freq = 1250000, .std_bits = 0x0f }, .atv_mn = { .if_freq = 5750000, .std_bits = 0x0d }, - .atsc_6 = { .if_freq = 5380000, .std_bits = 0x1b }, - .dvbt_6 = { .if_freq = 3300000, .std_bits = 0x1b }, - .dvbt_7 = { .if_freq = 3800000, .std_bits = 0x19 }, - .dvbt_8 = { .if_freq = 4300000, .std_bits = 0x1a }, - .qam_6 = { .if_freq = 4000000, .std_bits = 0x18 }, + .atsc_6 = { .if_freq = 3250000, .std_bits = 0x1c }, + .dvbt_6 = { .if_freq = 3300000, .std_bits = 0x1c }, + .dvbt_7 = { .if_freq = 3800000, .std_bits = 0x1d }, + .dvbt_8 = { .if_freq = 4300000, .std_bits = 0x1e }, + .qam_6 = { .if_freq = 4000000, .std_bits = 0x1d }, .qam_8 = { .if_freq = 5000000, .std_bits = 0x1f }, }; @@ -1210,7 +1210,7 @@ static struct tda18271_std_map tda18271c2_std_map = { .atv_l = { .if_freq = 6900000, .std_bits = 0x0e }, .atv_lc = { .if_freq = 1250000, .std_bits = 0x0e }, .atv_mn = { .if_freq = 5400000, .std_bits = 0x0c }, - .atsc_6 = { .if_freq = 5380000, .std_bits = 0x1b }, + .atsc_6 = { .if_freq = 3250000, .std_bits = 0x1c }, .dvbt_6 = { .if_freq = 3300000, .std_bits = 0x1c }, .dvbt_7 = { .if_freq = 3500000, .std_bits = 0x1c }, .dvbt_8 = { .if_freq = 4000000, .std_bits = 0x1d }, @@ -1256,11 +1256,13 @@ int tda18271_assign_map_layout(struct dvb_frontend *fe) switch (priv->id) { case TDA18271HDC1: priv->maps = &tda18271c1_map_layout; - priv->std = &tda18271c1_std_map; + memcpy(&priv->std, &tda18271c1_std_map, + sizeof(struct tda18271_std_map)); break; case TDA18271HDC2: priv->maps = &tda18271c2_map_layout; - priv->std = &tda18271c2_std_map; + memcpy(&priv->std, &tda18271c2_std_map, + sizeof(struct tda18271_std_map)); break; default: ret = -EINVAL; diff --git a/drivers/media/dvb/frontends/tda18271.h b/drivers/media/dvb/frontends/tda18271.h index f53568103311..36a3a548a6f5 100644 --- a/drivers/media/dvb/frontends/tda18271.h +++ b/drivers/media/dvb/frontends/tda18271.h @@ -24,21 +24,47 @@ #include #include "dvb_frontend.h" +struct tda18271_std_map_item { + u32 if_freq; + u8 std_bits; +}; + +struct tda18271_std_map { + struct tda18271_std_map_item atv_b; + struct tda18271_std_map_item atv_dk; + struct tda18271_std_map_item atv_gh; + struct tda18271_std_map_item atv_i; + struct tda18271_std_map_item atv_l; + struct tda18271_std_map_item atv_lc; + struct tda18271_std_map_item atv_mn; + struct tda18271_std_map_item atsc_6; + struct tda18271_std_map_item dvbt_6; + struct tda18271_std_map_item dvbt_7; + struct tda18271_std_map_item dvbt_8; + struct tda18271_std_map_item qam_6; + struct tda18271_std_map_item qam_8; +}; + enum tda18271_i2c_gate { TDA18271_GATE_AUTO = 0, TDA18271_GATE_ANALOG, TDA18271_GATE_DIGITAL, }; +struct tda18271_config { + struct tda18271_std_map *std_map; + enum tda18271_i2c_gate gate; +}; + #if defined(CONFIG_DVB_TDA18271) || (defined(CONFIG_DVB_TDA18271_MODULE) && defined(MODULE)) extern struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, struct i2c_adapter *i2c, - enum tda18271_i2c_gate gate); + struct tda18271_config *cfg); #else static inline struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, struct i2c_adapter *i2c, - enum tda18271_i2c_gate gate) + struct tda18271_config *cfg) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); return NULL; diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 81dd47f6f654..948a7fb7ed06 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -183,6 +183,16 @@ static struct tda829x_config tda829x_no_probe = { .probe_tuner = TDA829X_DONT_PROBE, }; +static struct tda18271_std_map hauppauge_tda18271_std_map = { + .atsc_6 = { .if_freq = 5380000, .std_bits = 0x1b }, + .qam_6 = { .if_freq = 4000000, .std_bits = 0x18 }, +}; + +static struct tda18271_config hauppauge_tda18271_config = { + .std_map = &hauppauge_tda18271_std_map, + .gate = TDA18271_GATE_ANALOG, +}; + static int cx23885_hvr1500_xc3028_callback(void *ptr, int command, int arg) { struct cx23885_tsport *port = ptr; @@ -248,7 +258,7 @@ static int dvb_register(struct cx23885_tsport *port) &tda829x_no_probe); dvb_attach(tda18271_attach, port->dvb.frontend, 0x60, &dev->i2c_bus[1].i2c_adap, - TDA18271_GATE_ANALOG); + &hauppauge_tda18271_config); } break; case 0: diff --git a/drivers/media/video/tda8290.c b/drivers/media/video/tda8290.c index 54d261a2f25a..eab530708a49 100644 --- a/drivers/media/video/tda8290.c +++ b/drivers/media/video/tda8290.c @@ -509,6 +509,10 @@ static void tda829x_release(struct dvb_frontend *fe) fe->analog_demod_priv = NULL; } +static struct tda18271_config tda829x_tda18271_config = { + .gate = TDA18271_GATE_ANALOG, +}; + static int tda829x_find_tuner(struct dvb_frontend *fe) { struct tda8290_priv *priv = fe->analog_demod_priv; @@ -574,7 +578,7 @@ static int tda829x_find_tuner(struct dvb_frontend *fe) priv->ver |= TDA18271; tda18271_attach(fe, priv->tda827x_addr, priv->i2c_props.adap, - TDA18271_GATE_ANALOG); + &tda829x_tda18271_config); } else { if ((data & 0x3c) == 0) priv->ver |= TDA8275; -- cgit v1.2.3-59-g8ed1b From 2ba65d517b91ebb30f4f2a88f1e1beeabd8d8ee6 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Thu, 3 Jan 2008 01:17:45 -0300 Subject: V4L/DVB (6963): tda18271: store IF frequency in a u16 instead of u32 Store IF Frequency in a u16 instead of a u32. Multiply by 1000 before use. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 11 +++--- drivers/media/dvb/frontends/tda18271-tables.c | 52 +++++++++++++-------------- drivers/media/dvb/frontends/tda18271.h | 2 +- drivers/media/video/cx23885/cx23885-dvb.c | 4 +-- 4 files changed, 35 insertions(+), 34 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index b17ab4ace08c..a02d6404f755 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -770,8 +770,8 @@ static int tda18271_set_params(struct dvb_frontend *fe, struct tda18271_priv *priv = fe->tuner_priv; struct tda18271_std_map *std_map = &priv->std; u8 std; - u32 bw, sgIF = 0; - u32 freq = params->frequency; + u16 sgIF; + u32 bw, freq = params->frequency; BUG_ON(!priv->tune); @@ -825,7 +825,7 @@ static int tda18271_set_params(struct dvb_frontend *fe, return -EINVAL; } - return priv->tune(fe, sgIF, freq, bw, std); + return priv->tune(fe, sgIF * 1000, freq, bw, std); } static int tda18271_set_analog_params(struct dvb_frontend *fe, @@ -835,7 +835,8 @@ static int tda18271_set_analog_params(struct dvb_frontend *fe, struct tda18271_std_map *std_map = &priv->std; char *mode; u8 std; - u32 sgIF, freq = params->frequency * 62500; + u16 sgIF; + u32 freq = params->frequency * 62500; BUG_ON(!priv->tune); @@ -877,7 +878,7 @@ static int tda18271_set_analog_params(struct dvb_frontend *fe, tda_dbg("setting tda18271 to system %s\n", mode); - return priv->tune(fe, sgIF, freq, 0, std); + return priv->tune(fe, sgIF * 1000, freq, 0, std); } static int tda18271_release(struct dvb_frontend *fe) diff --git a/drivers/media/dvb/frontends/tda18271-tables.c b/drivers/media/dvb/frontends/tda18271-tables.c index 2f8ea72bcabb..528a2ec9e967 100644 --- a/drivers/media/dvb/frontends/tda18271-tables.c +++ b/drivers/media/dvb/frontends/tda18271-tables.c @@ -1187,35 +1187,35 @@ fail: /*---------------------------------------------------------------------*/ static struct tda18271_std_map tda18271c1_std_map = { - .atv_b = { .if_freq = 6750000, .std_bits = 0x0e }, - .atv_dk = { .if_freq = 7750000, .std_bits = 0x0f }, - .atv_gh = { .if_freq = 7750000, .std_bits = 0x0f }, - .atv_i = { .if_freq = 7750000, .std_bits = 0x0f }, - .atv_l = { .if_freq = 7750000, .std_bits = 0x0f }, - .atv_lc = { .if_freq = 1250000, .std_bits = 0x0f }, - .atv_mn = { .if_freq = 5750000, .std_bits = 0x0d }, - .atsc_6 = { .if_freq = 3250000, .std_bits = 0x1c }, - .dvbt_6 = { .if_freq = 3300000, .std_bits = 0x1c }, - .dvbt_7 = { .if_freq = 3800000, .std_bits = 0x1d }, - .dvbt_8 = { .if_freq = 4300000, .std_bits = 0x1e }, - .qam_6 = { .if_freq = 4000000, .std_bits = 0x1d }, - .qam_8 = { .if_freq = 5000000, .std_bits = 0x1f }, + .atv_b = { .if_freq = 6750, .std_bits = 0x0e }, + .atv_dk = { .if_freq = 7750, .std_bits = 0x0f }, + .atv_gh = { .if_freq = 7750, .std_bits = 0x0f }, + .atv_i = { .if_freq = 7750, .std_bits = 0x0f }, + .atv_l = { .if_freq = 7750, .std_bits = 0x0f }, + .atv_lc = { .if_freq = 1250, .std_bits = 0x0f }, + .atv_mn = { .if_freq = 5750, .std_bits = 0x0d }, + .atsc_6 = { .if_freq = 3250, .std_bits = 0x1c }, + .dvbt_6 = { .if_freq = 3300, .std_bits = 0x1c }, + .dvbt_7 = { .if_freq = 3800, .std_bits = 0x1d }, + .dvbt_8 = { .if_freq = 4300, .std_bits = 0x1e }, + .qam_6 = { .if_freq = 4000, .std_bits = 0x1d }, + .qam_8 = { .if_freq = 5000, .std_bits = 0x1f }, }; static struct tda18271_std_map tda18271c2_std_map = { - .atv_b = { .if_freq = 6000000, .std_bits = 0x0d }, - .atv_dk = { .if_freq = 6900000, .std_bits = 0x0e }, - .atv_gh = { .if_freq = 7100000, .std_bits = 0x0e }, - .atv_i = { .if_freq = 7250000, .std_bits = 0x0e }, - .atv_l = { .if_freq = 6900000, .std_bits = 0x0e }, - .atv_lc = { .if_freq = 1250000, .std_bits = 0x0e }, - .atv_mn = { .if_freq = 5400000, .std_bits = 0x0c }, - .atsc_6 = { .if_freq = 3250000, .std_bits = 0x1c }, - .dvbt_6 = { .if_freq = 3300000, .std_bits = 0x1c }, - .dvbt_7 = { .if_freq = 3500000, .std_bits = 0x1c }, - .dvbt_8 = { .if_freq = 4000000, .std_bits = 0x1d }, - .qam_6 = { .if_freq = 4000000, .std_bits = 0x1d }, - .qam_8 = { .if_freq = 5000000, .std_bits = 0x1f }, + .atv_b = { .if_freq = 6000, .std_bits = 0x0d }, + .atv_dk = { .if_freq = 6900, .std_bits = 0x0e }, + .atv_gh = { .if_freq = 7100, .std_bits = 0x0e }, + .atv_i = { .if_freq = 7250, .std_bits = 0x0e }, + .atv_l = { .if_freq = 6900, .std_bits = 0x0e }, + .atv_lc = { .if_freq = 1250, .std_bits = 0x0e }, + .atv_mn = { .if_freq = 5400, .std_bits = 0x0c }, + .atsc_6 = { .if_freq = 3250, .std_bits = 0x1c }, + .dvbt_6 = { .if_freq = 3300, .std_bits = 0x1c }, + .dvbt_7 = { .if_freq = 3500, .std_bits = 0x1c }, + .dvbt_8 = { .if_freq = 4000, .std_bits = 0x1d }, + .qam_6 = { .if_freq = 4000, .std_bits = 0x1d }, + .qam_8 = { .if_freq = 5000, .std_bits = 0x1f }, }; /*---------------------------------------------------------------------*/ diff --git a/drivers/media/dvb/frontends/tda18271.h b/drivers/media/dvb/frontends/tda18271.h index 36a3a548a6f5..4fa3d6ab6216 100644 --- a/drivers/media/dvb/frontends/tda18271.h +++ b/drivers/media/dvb/frontends/tda18271.h @@ -25,7 +25,7 @@ #include "dvb_frontend.h" struct tda18271_std_map_item { - u32 if_freq; + u16 if_freq; u8 std_bits; }; diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 948a7fb7ed06..1b669ee962d0 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -184,8 +184,8 @@ static struct tda829x_config tda829x_no_probe = { }; static struct tda18271_std_map hauppauge_tda18271_std_map = { - .atsc_6 = { .if_freq = 5380000, .std_bits = 0x1b }, - .qam_6 = { .if_freq = 4000000, .std_bits = 0x18 }, + .atsc_6 = { .if_freq = 5380, .std_bits = 0x1b }, + .qam_6 = { .if_freq = 4000, .std_bits = 0x18 }, }; static struct tda18271_config hauppauge_tda18271_config = { -- cgit v1.2.3-59-g8ed1b From 0e1fab90a8a76e09b669d3159ec910eab7ee97d6 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Thu, 3 Jan 2008 01:40:47 -0300 Subject: V4L/DVB (6964): tda18271: document debug level and configuration parameters Document debug level module options and tda18271_config attach-time parameters. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 3 ++- drivers/media/dvb/frontends/tda18271.h | 3 +++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index a02d6404f755..55c17fc22275 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -24,7 +24,8 @@ int tda18271_debug; module_param_named(debug, tda18271_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debug level (info=1, map=2, reg=4 (or-able))"); +MODULE_PARM_DESC(debug, "set debug level " + "(info=1, map=2, reg=4, adv=8 (or-able))"); /*---------------------------------------------------------------------*/ diff --git a/drivers/media/dvb/frontends/tda18271.h b/drivers/media/dvb/frontends/tda18271.h index 4fa3d6ab6216..9ccfa6e8b5a9 100644 --- a/drivers/media/dvb/frontends/tda18271.h +++ b/drivers/media/dvb/frontends/tda18271.h @@ -52,7 +52,10 @@ enum tda18271_i2c_gate { }; struct tda18271_config { + /* override default if freq / std settings (optional) */ struct tda18271_std_map *std_map; + + /* use i2c gate provided by analog or digital demod */ enum tda18271_i2c_gate gate; }; -- cgit v1.2.3-59-g8ed1b From d2c932a1f7aca16727ce6670c5eccb0a4e2b47a5 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 5 Jan 2008 15:42:54 -0300 Subject: V4L/DVB (6965): tda18271: fix analog tuning regression caused by earlier changeset An earlier patch, "tda18271: fail table lookups if frequency is out of range" broke analog support on certain hardware. This patch fixes that problem, by allowing the RF_CAL byte to be set to the maximum value, in cases of the frequency being out of range. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-common.c | 8 +++----- drivers/media/dvb/frontends/tda18271-tables.c | 4 ++-- 2 files changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271-common.c b/drivers/media/dvb/frontends/tda18271-common.c index 4adc7390ba00..d7a335659474 100644 --- a/drivers/media/dvb/frontends/tda18271-common.c +++ b/drivers/media/dvb/frontends/tda18271-common.c @@ -601,13 +601,11 @@ int tda18271_calc_rf_cal(struct dvb_frontend *fe, u32 *freq) unsigned char *regs = priv->tda18271_regs; u8 val; - int ret = tda18271_lookup_map(fe, RF_CAL, freq, &val); - if (ret < 0) - goto fail; + tda18271_lookup_map(fe, RF_CAL, freq, &val); regs[R_EB14] = val; -fail: - return ret; + + return 0; } /* diff --git a/drivers/media/dvb/frontends/tda18271-tables.c b/drivers/media/dvb/frontends/tda18271-tables.c index 528a2ec9e967..0402c7dab19d 100644 --- a/drivers/media/dvb/frontends/tda18271-tables.c +++ b/drivers/media/dvb/frontends/tda18271-tables.c @@ -1098,7 +1098,7 @@ int tda18271_lookup_pll_map(struct dvb_frontend *fe, } while ((map[i].lomax * 1000) < *freq) { - if (map[i].lomax == 0) { + if (map[i + 1].lomax == 0) { tda_map("%s: frequency (%d) out of range\n", map_name, *freq); ret = -ERANGE; @@ -1169,7 +1169,7 @@ int tda18271_lookup_map(struct dvb_frontend *fe, } while ((map[i].rfmax * 1000) < *freq) { - if (map[i].rfmax == 0) { + if (map[i + 1].rfmax == 0) { tda_map("%s: frequency (%d) out of range\n", map_name, *freq); ret = -ERANGE; -- cgit v1.2.3-59-g8ed1b From 11fcd4703004fc8c9030ba45dda8ad74a431d235 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Thu, 25 Oct 2007 02:01:10 -0300 Subject: V4L/DVB (6967): pvrusb2: add support for Hauppauge WinTV PVR-USB2 Model 75xxx Create a device description and enable autodetection for Hauppauge WinTV PVR-USB2 Model 75xxx Signed-off-by: Michael Krufky Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-devattr.c | 29 +++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c index 9a08670d406f..4df6d6d936fc 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c +++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c @@ -154,6 +154,33 @@ static const struct pvr2_device_desc pvr2_device_onair_usb2 = { +/*------------------------------------------------------------------------*/ +/* Hauppauge PVR-USB2 Model 75xxx */ + +static const char *pvr2_client_75xxx[] = { + "cx25840", + "tuner", +}; + +static const char *pvr2_fw1_names_75xxx[] = { + "v4l-pvrusb2-73xxx-01.fw", +}; + +static const struct pvr2_device_desc pvr2_device_75xxx = { + .description = "WinTV PVR USB2 Model Category 75xxxx", + .shortname = "75xxx", + .client_modules.lst = pvr2_client_75xxx, + .client_modules.cnt = ARRAY_SIZE(pvr2_client_75xxx), + .fx2_firmware.lst = pvr2_fw1_names_75xxx, + .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_75xxx), + .flag_has_cx25840 = !0, + .flag_has_hauppauge_rom = !0, + .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, + .default_std_mask = V4L2_STD_NTSC_M, +}; + + + /*------------------------------------------------------------------------*/ struct usb_device_id pvr2_device_table[] = { @@ -171,6 +198,8 @@ struct usb_device_id pvr2_device_table[] = { { USB_DEVICE(0x11ba, 0x1001), .driver_info = (kernel_ulong_t)&pvr2_device_onair_usb2}, #endif + { USB_DEVICE(0x2040, 0x7500), + .driver_info = (kernel_ulong_t)&pvr2_device_75xxx}, { } }; -- cgit v1.2.3-59-g8ed1b From a4950134d46f0b83745f05ea37987785a3905eba Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 6 Jan 2008 09:45:44 -0300 Subject: V4L/DVB (6969): Avoid causing regressions for non-HVR950 boards Only HVR950 has analog_gpio configured. It makes no sense to set gpio to 0 for other boards. Better to add a test, while this var is not set for all xc3028 devices. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 34 +++++++++++++++++-------------- 1 file changed, 19 insertions(+), 15 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 1011813ad7c2..5ffdbaab3ad3 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -485,27 +485,31 @@ static int em28xx_tuner_callback(void *ptr, int command, int arg) switch (command) { case XC2028_TUNER_RESET: { - char gpio0, gpio1, gpio4; - - /* GPIO and initialization codes for analog TV */ - gpio0 = dev->analog_gpio & 0xff; - gpio1 = (dev->analog_gpio >> 8) & 0xff; - gpio4 = dev->analog_gpio >> 24; + /* GPIO and initialization codes for analog TV and radio + This code should be complemented for DTV, since reset + codes are different. + */ dev->em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1); dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x67", 1); - if (gpio4) { - dev->em28xx_write_regs(dev, 0x04, &gpio4, 1); - msleep(140); + if (dev->analog_gpio) { + char gpio0 = dev->analog_gpio & 0xff; + char gpio1 = (dev->analog_gpio >> 8) & 0xff; + char gpio4 = dev->analog_gpio >> 24; + + if (gpio4) { + dev->em28xx_write_regs(dev, 0x04, &gpio4, 1); + msleep(140); + } + + msleep(6); + dev->em28xx_write_regs(dev, 0x08, &gpio0, 1); + msleep(10); + dev->em28xx_write_regs(dev, 0x08, &gpio1, 1); + msleep(5); } - msleep(6); - dev->em28xx_write_regs(dev, 0x08, &gpio0, 1); - msleep(10); - dev->em28xx_write_regs(dev, 0x08, &gpio1, 1); - msleep(5); - break; } } -- cgit v1.2.3-59-g8ed1b From 3f4dfe2acf4ffed48395e69166531d8925eb106a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 6 Jan 2008 09:54:17 -0300 Subject: V4L/DVB (6970): Request snd-usb-audio for devices with Audio Class support Before this patch, only Vendor Class audio support were loaded. This means that older em28xx devices won't have digital audio support loaded. This patch changes the logic to auto load eighter snd-usb-audio, for devices with USB Audio Class or em28xx-alsa, for devices with USB Vendor Class. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-video.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 5a90462d82e5..de95ca874241 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -1979,7 +1979,9 @@ static void request_module_async(struct work_struct *work) struct em28xx *dev = container_of(work, struct em28xx, request_module_wk); - if (!dev->has_audio_class) + if (dev->has_audio_class) + request_module("snd-usb-audio"); + else request_module("em28xx-alsa"); } -- cgit v1.2.3-59-g8ed1b From e8018c9e78b0ff4bb0290e46f4045fb4ea589ae8 Mon Sep 17 00:00:00 2001 From: "Andrey J. Melnikoff (TEMHOTA)" Date: Mon, 7 Jan 2008 05:17:39 -0300 Subject: V4L/DVB (6973): Add Beholder TV 401/405/407/409/505/507/609/M6 support This patch updates cardlist for Beholder TV tuners: old models (with GPIO ir) 401, 403, 405, 407, 409, 505, 507 and add support for 607, 609, M6 cards with new i2c-ir. Signed-off-by: Igor Kuznetsov Signed-off-by: Andrey J. Melnikov Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.saa7134 | 13 + drivers/media/common/ir-keymaps.c | 104 ++++++ drivers/media/video/ir-kbd-i2c.c | 3 +- drivers/media/video/saa7134/saa7134-cards.c | 504 ++++++++++++++++++++++++++++ drivers/media/video/saa7134/saa7134-i2c.c | 2 + drivers/media/video/saa7134/saa7134-input.c | 60 ++++ drivers/media/video/saa7134/saa7134.h | 13 + include/media/ir-common.h | 1 + 8 files changed, 699 insertions(+), 1 deletion(-) diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index 29ca16cdb713..387c35f2ecd7 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -116,3 +116,16 @@ 115 -> Sabrent PCMCIA TV-PCB05 [0919:2003] 116 -> 10MOONS TM300 TV Card [1131:2304] 117 -> Avermedia Super 007 [1461:f01d] +118 -> Beholder BeholdTV 401 [1131:0000,0000:4016] +119 -> Beholder BeholdTV 403 [0000:4036] +120 -> Beholder BeholdTV 403 FM [1131:0000,0000:4037] +121 -> Beholder BeholdTV 405 [0000:4050] +122 -> Beholder BeholdTV 405 FM [0000:4051] +123 -> [0000:4070] +124 -> Beholder BeholdTV 407 FM [0000:4071] +125 -> Beholder BeholdTV 409 [0000:4090] +126 -> Beholder BeholdTV 505 FM/RDS [0000:5051,0000:505B,5ace:5050] +127 -> Beholder BeholdTV 507 FM/RDS / BeholdTV 509 FM [0000:5071,0000:507B,5ace:5070,5ace:5090] +128 -> Beholder BeholdTV Columbus TVFM [0000:5201] +129 -> Beholder BeholdTV 607 / BeholdTV 609 [5ace:6070,5ace:6071,5ace:6072,5ace:6073,5ace:6090,5ace:6091,5ace:6092,5ace:6093] +130 -> Beholder BeholdTV M6 / BeholdTV M6 Extra [5ace:6190,5ace:6193] diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c index 42762dfb7387..ee2c69e3152a 100644 --- a/drivers/media/common/ir-keymaps.c +++ b/drivers/media/common/ir-keymaps.c @@ -1848,3 +1848,107 @@ IR_KEYTAB_TYPE ir_codes_fusionhdtv_mce[IR_KEYTAB_SIZE] = { }; EXPORT_SYMBOL_GPL(ir_codes_fusionhdtv_mce); + +/* + * Igor Kuznetsov + * Andrey J. Melnikov + * + * Keytable is used by BeholdTV 60x series, M6 series at + * least, and probably other cards too. + * The "ascii-art picture" below (in comments, first row + * is the keycode in hex, and subsequent row(s) shows + * the button labels (several variants when appropriate) + * helps to descide which keycodes to assign to the buttons. + */ +IR_KEYTAB_TYPE ir_codes_behold[IR_KEYTAB_SIZE] = { + + /* 0x1c 0x12 * + * TV/FM POWER * + * */ + [ 0x1c ] = KEY_TUNER, /*XXX KEY_TV KEY_RADIO */ + [ 0x12 ] = KEY_POWER, + + /* 0x01 0x02 0x03 * + * 1 2 3 * + * * + * 0x04 0x05 0x06 * + * 4 5 6 * + * * + * 0x07 0x08 0x09 * + * 7 8 9 * + * */ + [ 0x01 ] = KEY_1, + [ 0x02 ] = KEY_2, + [ 0x03 ] = KEY_3, + [ 0x04 ] = KEY_4, + [ 0x05 ] = KEY_5, + [ 0x06 ] = KEY_6, + [ 0x07 ] = KEY_7, + [ 0x08 ] = KEY_8, + [ 0x09 ] = KEY_9, + + /* 0x0a 0x00 0x17 * + * RECALL 0 MODE * + * */ + [ 0x0a ] = KEY_AGAIN, + [ 0x00 ] = KEY_0, + [ 0x17 ] = KEY_MODE, + + /* 0x14 0x10 * + * ASPECT FULLSCREEN * + * */ + [ 0x14 ] = KEY_SCREEN, + [ 0x10 ] = KEY_ZOOM, + + /* 0x0b * + * Up * + * * + * 0x18 0x16 0x0c * + * Left Ok Right * + * * + * 0x015 * + * Down * + * */ + [ 0x0b ] = KEY_CHANNELUP, /*XXX KEY_UP */ + [ 0x18 ] = KEY_VOLUMEDOWN, /*XXX KEY_LEFT */ + [ 0x16 ] = KEY_OK, /*XXX KEY_ENTER */ + [ 0x0c ] = KEY_VOLUMEUP, /*XXX KEY_RIGHT */ + [ 0x15 ] = KEY_CHANNELDOWN, /*XXX KEY_DOWN */ + + /* 0x11 0x0d * + * MUTE INFO * + * */ + [ 0x11 ] = KEY_MUTE, + [ 0x0d ] = KEY_INFO, + + /* 0x0f 0x1b 0x1a * + * RECORD PLAY/PAUSE STOP * + * * + * 0x0e 0x1f 0x1e * + *TELETEXT AUDIO SOURCE * + * RED YELLOW * + * */ + [ 0x0f ] = KEY_RECORD, + [ 0x1b ] = KEY_PLAYPAUSE, + [ 0x1a ] = KEY_STOP, + [ 0x0e ] = KEY_TEXT, + [ 0x1f ] = KEY_RED, /*XXX KEY_AUDIO */ + [ 0x1e ] = KEY_YELLOW, /*XXX KEY_SOURCE */ + + /* 0x1d 0x13 0x19 * + * SLEEP PREVIEW DVB * + * GREEN BLUE * + * */ + [ 0x1d ] = KEY_SLEEP, + [ 0x13 ] = KEY_GREEN, + [ 0x19 ] = KEY_BLUE, /*XXX KEY_SAT */ + + /* 0x58 0x5c * + * FREEZE SNAPSHOT * + * */ + [ 0x58 ] = KEY_SLOW, + [ 0x5c ] = KEY_SAVE, + +}; + +EXPORT_SYMBOL_GPL(ir_codes_behold); diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c index 29779d8bf7fb..9851987b95fb 100644 --- a/drivers/media/video/ir-kbd-i2c.c +++ b/drivers/media/video/ir-kbd-i2c.c @@ -398,6 +398,7 @@ static int ir_attach(struct i2c_adapter *adap, int addr, case 0x7a: case 0x47: case 0x71: + case 0x2d: if (adap->id == I2C_HW_B_CX2388x) { /* Handled by cx88-input */ name = "CX2388x remote"; @@ -504,7 +505,7 @@ static int ir_probe(struct i2c_adapter *adap) */ static const int probe_bttv[] = { 0x1a, 0x18, 0x4b, 0x64, 0x30, -1}; - static const int probe_saa7134[] = { 0x7a, 0x47, 0x71, -1 }; + static const int probe_saa7134[] = { 0x7a, 0x47, 0x71, 0x2d, -1 }; static const int probe_em28XX[] = { 0x30, 0x47, -1 }; static const int probe_cx88[] = { 0x18, 0x6b, 0x71, -1 }; static const int probe_cx23885[] = { 0x6b, -1 }; diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index b29427aaa88d..6a35d88fdbb2 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -3562,6 +3562,329 @@ struct saa7134_board saa7134_boards[] = { .tv = 1, }}, }, + [SAA7134_BOARD_BEHOLD_401] = { + .name = "Beholder BeholdTV 401", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FQ1216ME, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + },{ + .name = name_tv, + .vmux = 3, + .amux = LINE2, + .tv = 1, + }}, + .mute = { + .name = name_mute, + .amux = LINE1, + }, + }, + [SAA7134_BOARD_BEHOLD_403] = { + .name = "Beholder BeholdTV 403", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FQ1216ME, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + },{ + .name = name_tv, + .vmux = 3, + .amux = LINE2, + .tv = 1, + }}, + }, + [SAA7134_BOARD_BEHOLD_403FM] = { + .name = "Beholder BeholdTV 403 FM", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FQ1216ME, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .inputs = {{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + },{ + .name = name_tv, + .vmux = 3, + .amux = LINE2, + .tv = 1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_BEHOLD_405] = { + .name = "Beholder BeholdTV 405", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + },{ + .name = name_tv, + .vmux = 3, + .amux = LINE2, + .tv = 1, + }}, + }, + [SAA7134_BOARD_BEHOLD_405FM] = { + /* Sergey */ + .name = "Beholder BeholdTV 405 FM", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + },{ + .name = name_comp1, + .vmux = 3, + .amux = LINE1, + },{ + .name = name_tv, + .vmux = 3, + .amux = LINE2, + .tv = 1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_BEHOLD_407FM] = { + .name = "Beholder BeholdTV 407 FM", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0xc0c000, + .inputs = {{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + .gpio = 0xc0c000, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + .gpio = 0xc0c000, + },{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + .gpio = 0xc0c000, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + .gpio = 0xc0c000, + }, + }, + [SAA7134_BOARD_BEHOLD_409] = { + .name = "Beholder BeholdTV 409", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + }, + [SAA7134_BOARD_BEHOLD_505FM] = { + .name = "Beholder BeholdTV 505 FM/RDS", + .audio_clock = 0x00200000, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = LINE2, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + .mute = { + .name = name_mute, + .amux = LINE1, + }, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_BEHOLD_507_9FM] = { + .name = "Beholder BeholdTV 507 FM/RDS / BeholdTV 509 FM", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM] = { + .name = "Beholder BeholdTV Columbus TVFM", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_ALPS_TSBE5_PAL, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_BEHOLD_607_9FM] = { + /* Andrey Melnikoff */ + .name = "Beholder BeholdTV 607 / BeholdTV 609", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + }, + [SAA7134_BOARD_BEHOLD_M6] = { + /* Igor Kuznetsov */ + /* Andrey Melnikoff */ + .name = "Beholder BeholdTV M6 / BeholdTV M6 Extra", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .inputs = {{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + }}, + .radio = { + .name = name_radio, + .amux = LINE2, + }, + .mpeg = SAA7134_MPEG_EMPRESS, + }, }; const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards); @@ -4326,6 +4649,174 @@ struct pci_device_id saa7134_pci_tbl[] = { .subvendor = 0x1461, /* Avermedia Technologies Inc */ .subdevice = 0xf01d, /* AVerTV DVB-T Super 007 */ .driver_data = SAA7134_BOARD_AVERMEDIA_SUPER_007, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x1131, + .subdevice = 0x0000, + .driver_data = SAA7134_BOARD_BEHOLD_401, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x0000, + .subdevice = 0x4016, + .driver_data = SAA7134_BOARD_BEHOLD_401, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x1131, + .subdevice = 0x0000, + .driver_data = SAA7134_BOARD_BEHOLD_403FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x0000, + .subdevice = 0x4036, + .driver_data = SAA7134_BOARD_BEHOLD_403, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x0000, + .subdevice = 0x4037, + .driver_data = SAA7134_BOARD_BEHOLD_403FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x0000, + .subdevice = 0x4050, + .driver_data = SAA7134_BOARD_BEHOLD_405, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x0000, + .subdevice = 0x4051, + .driver_data = SAA7134_BOARD_BEHOLD_405FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x0000, + .subdevice = 0x4070, + .driver_data = SAA7134_BOARD_BEHOLD_407, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x0000, + .subdevice = 0x4071, + .driver_data = SAA7134_BOARD_BEHOLD_407FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x0000, + .subdevice = 0x4090, + .driver_data = SAA7134_BOARD_BEHOLD_409, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x0000, + .subdevice = 0x5051, + .driver_data = SAA7134_BOARD_BEHOLD_505FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x0000, + .subdevice = 0x505B, + .driver_data = SAA7134_BOARD_BEHOLD_505FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7130, + .subvendor = 0x5ace, + .subdevice = 0x5050, + .driver_data = SAA7134_BOARD_BEHOLD_505FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x0000, + .subdevice = 0x5071, + .driver_data = SAA7134_BOARD_BEHOLD_507_9FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x0000, + .subdevice = 0x507B, + .driver_data = SAA7134_BOARD_BEHOLD_507_9FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x5ace, + .subdevice = 0x5070, + .driver_data = SAA7134_BOARD_BEHOLD_507_9FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5ace, + .subdevice = 0x5090, + .driver_data = SAA7134_BOARD_BEHOLD_507_9FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x0000, + .subdevice = 0x5201, + .driver_data = SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x5ace, + .subdevice = 0x6070, + .driver_data = SAA7134_BOARD_BEHOLD_607_9FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x5ace, + .subdevice = 0x6071, + .driver_data = SAA7134_BOARD_BEHOLD_607_9FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x5ace, + .subdevice = 0x6072, + .driver_data = SAA7134_BOARD_BEHOLD_607_9FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7134, + .subvendor = 0x5ace, + .subdevice = 0x6073, + .driver_data = SAA7134_BOARD_BEHOLD_607_9FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5ace, + .subdevice = 0x6090, + .driver_data = SAA7134_BOARD_BEHOLD_607_9FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5ace, + .subdevice = 0x6091, + .driver_data = SAA7134_BOARD_BEHOLD_607_9FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5ace, + .subdevice = 0x6092, + .driver_data = SAA7134_BOARD_BEHOLD_607_9FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5ace, + .subdevice = 0x6093, + .driver_data = SAA7134_BOARD_BEHOLD_607_9FM, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5ace, + .subdevice = 0x6190, + .driver_data = SAA7134_BOARD_BEHOLD_M6, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x5ace, + .subdevice = 0x6193, + .driver_data = SAA7134_BOARD_BEHOLD_M6, },{ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7133, @@ -4473,6 +4964,16 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_ENCORE_ENLTV: case SAA7134_BOARD_ENCORE_ENLTV_FM: case SAA7134_BOARD_10MOONSTVMASTER3: + case SAA7134_BOARD_BEHOLD_401: + case SAA7134_BOARD_BEHOLD_403: + case SAA7134_BOARD_BEHOLD_403FM: + case SAA7134_BOARD_BEHOLD_405: + case SAA7134_BOARD_BEHOLD_405FM: + case SAA7134_BOARD_BEHOLD_407: + case SAA7134_BOARD_BEHOLD_407FM: + case SAA7134_BOARD_BEHOLD_409: + case SAA7134_BOARD_BEHOLD_505FM: + case SAA7134_BOARD_BEHOLD_507_9FM: dev->has_remote = SAA7134_REMOTE_GPIO; break; case SAA7134_BOARD_FLYDVBS_LR300: @@ -4512,6 +5013,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x08000000, 0x00000000); break; case SAA7134_BOARD_AVERMEDIA_CARDBUS: + case SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM: /* power-up tuner chip */ saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0xffffffff, 0xffffffff); saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0xffffffff); @@ -4533,6 +5035,8 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_PINNACLE_PCTV_310i: case SAA7134_BOARD_UPMOST_PURPLE_TV: case SAA7134_BOARD_HAUPPAUGE_HVR1110: + case SAA7134_BOARD_BEHOLD_607_9FM: + case SAA7134_BOARD_BEHOLD_M6: dev->has_remote = SAA7134_REMOTE_I2C; break; case SAA7134_BOARD_AVERMEDIA_A169_B: diff --git a/drivers/media/video/saa7134/saa7134-i2c.c b/drivers/media/video/saa7134/saa7134-i2c.c index 800b397f8f16..d3322c3018f2 100644 --- a/drivers/media/video/saa7134/saa7134-i2c.c +++ b/drivers/media/video/saa7134/saa7134-i2c.c @@ -334,6 +334,7 @@ static int attach_inform(struct i2c_client *client) case 0x7a: case 0x47: case 0x71: + case 0x2d: { struct IR_i2c *ir = i2c_get_clientdata(client); d1printk("%s i2c IR detected (%s).\n", @@ -439,6 +440,7 @@ static char *i2c_devs[128] = { [ 0xa0 >> 1 ] = "eeprom", [ 0xc0 >> 1 ] = "tuner (analog)", [ 0x86 >> 1 ] = "tda9887", + [ 0x5a >> 1 ] = "remote control", }; static void do_i2c_scan(char *name, struct i2c_client *c) diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index 8cfeb2bde90f..7f4212928e9f 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -52,6 +52,11 @@ module_param(repeat_period, int, 0644); MODULE_PARM_DESC(repeat_period, "repeat period between " "keypresses when key is down"); +static unsigned int disable_other_ir; +module_param(disable_other_ir, int, 0644); +MODULE_PARM_DESC(disable_other_ir, "disable full codes of " + "alternative remotes from other manufacturers"); + #define dprintk(fmt, arg...) if (ir_debug) \ printk(KERN_DEBUG "%s/ir: " fmt, dev->name , ## arg) #define i2cdprintk(fmt, arg...) if (ir_debug) \ @@ -154,6 +159,45 @@ static int get_key_hvr1110(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) return 1; } + +static int get_key_beholdm6xx(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +{ + unsigned char data[12]; + u32 gpio; + + struct saa7134_dev *dev = ir->c.adapter->algo_data; + + /* rising SAA7134_GPIO_GPRESCAN reads the status */ + saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN); + + gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2); + + if (0x400000 &~ gpio) + return 0; /* No button press */ + + ir->c.addr = 0x5a >> 1; + + if (12 != i2c_master_recv(&ir->c, data, 12)) { + i2cdprintk("read error\n"); + return -EIO; + } + /* IR of this card normally decode signals NEC-standard from + * - Sven IHOO MT 5.1R remote. xxyye718 + * - Sven DVD HD-10xx remote. xxyyf708 + * - BBK ... + * - mayby others + * So, skip not our, if disable full codes mode. + */ + if (data[10] != 0x6b && data[11] != 0x86 && disable_other_ir) + return 0; + + *ir_key = data[9]; + *ir_raw = data[9]; + + return 1; +} + void saa7134_input_irq(struct saa7134_dev *dev) { struct card_ir *ir = dev->remote; @@ -288,6 +332,16 @@ int saa7134_input_init1(struct saa7134_dev *dev) case SAA7134_BOARD_MANLI_MTV001: case SAA7134_BOARD_MANLI_MTV002: case SAA7134_BOARD_BEHOLD_409FM: + case SAA7134_BOARD_BEHOLD_401: + case SAA7134_BOARD_BEHOLD_403: + case SAA7134_BOARD_BEHOLD_403FM: + case SAA7134_BOARD_BEHOLD_405: + case SAA7134_BOARD_BEHOLD_405FM: + case SAA7134_BOARD_BEHOLD_407: + case SAA7134_BOARD_BEHOLD_407FM: + case SAA7134_BOARD_BEHOLD_409: + case SAA7134_BOARD_BEHOLD_505FM: + case SAA7134_BOARD_BEHOLD_507_9FM: ir_codes = ir_codes_manli; mask_keycode = 0x001f00; mask_keyup = 0x004000; @@ -458,6 +512,12 @@ void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir) ir->get_key = get_key_hvr1110; ir->ir_codes = ir_codes_hauppauge_new; break; + case SAA7134_BOARD_BEHOLD_607_9FM: + case SAA7134_BOARD_BEHOLD_M6: + snprintf(ir->c.name, sizeof(ir->c.name), "BeholdTV"); + ir->get_key = get_key_beholdm6xx; + ir->ir_codes = ir_codes_behold; + break; default: dprintk("Shouldn't get here: Unknown board %x for I2C IR?\n",dev->board); break; diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 3e77aeb7974f..ce450304fb53 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -240,6 +240,19 @@ struct saa7134_format { #define SAA7134_BOARD_SABRENT_TV_PCB05 115 #define SAA7134_BOARD_10MOONSTVMASTER3 116 #define SAA7134_BOARD_AVERMEDIA_SUPER_007 117 +#define SAA7134_BOARD_BEHOLD_401 118 +#define SAA7134_BOARD_BEHOLD_403 119 +#define SAA7134_BOARD_BEHOLD_403FM 120 +#define SAA7134_BOARD_BEHOLD_405 121 +#define SAA7134_BOARD_BEHOLD_405FM 122 +#define SAA7134_BOARD_BEHOLD_407 123 +#define SAA7134_BOARD_BEHOLD_407FM 124 +#define SAA7134_BOARD_BEHOLD_409 125 +#define SAA7134_BOARD_BEHOLD_505FM 126 +#define SAA7134_BOARD_BEHOLD_507_9FM 127 +#define SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM 128 +#define SAA7134_BOARD_BEHOLD_607_9FM 129 +#define SAA7134_BOARD_BEHOLD_M6 130 #define SAA7134_MAXBOARDS 8 #define SAA7134_INPUT_MAX 8 diff --git a/include/media/ir-common.h b/include/media/ir-common.h index b904d3257260..9c2fc09a7133 100644 --- a/include/media/ir-common.h +++ b/include/media/ir-common.h @@ -140,6 +140,7 @@ extern IR_KEYTAB_TYPE ir_codes_asus_pc39[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_encore_enltv[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_tt_1500[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_fusionhdtv_mce[IR_KEYTAB_SIZE]; +extern IR_KEYTAB_TYPE ir_codes_behold[IR_KEYTAB_SIZE]; #endif -- cgit v1.2.3-59-g8ed1b From 616f8878bc5b5b2276f1941643d9ca7c88690305 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 7 Jan 2008 05:18:36 -0300 Subject: V4L/DVB (6974): Fix codingStyle Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-input.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index 7f4212928e9f..0db955c2d9b9 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -173,7 +173,7 @@ static int get_key_beholdm6xx(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2); - if (0x400000 &~ gpio) + if (0x400000 & ~gpio) return 0; /* No button press */ ir->c.addr = 0x5a >> 1; -- cgit v1.2.3-59-g8ed1b From 1434bc0cbb842ed71eada244ac46185e3b17e4e2 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 7 Jan 2008 05:20:04 -0300 Subject: V4L/DVB (6975): Add missing entry for Beholder BeholdTV 407 Acked-by: Andrey J. Melnikov Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.saa7134 | 2 +- drivers/media/video/saa7134/saa7134-cards.c | 27 +++++++++++++++++++++++++++ 2 files changed, 28 insertions(+), 1 deletion(-) diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index 387c35f2ecd7..fda570e50fa8 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -121,7 +121,7 @@ 120 -> Beholder BeholdTV 403 FM [1131:0000,0000:4037] 121 -> Beholder BeholdTV 405 [0000:4050] 122 -> Beholder BeholdTV 405 FM [0000:4051] -123 -> [0000:4070] +123 -> Beholder BeholdTV 407 [0000:4070] 124 -> Beholder BeholdTV 407 FM [0000:4071] 125 -> Beholder BeholdTV 409 [0000:4090] 126 -> Beholder BeholdTV 505 FM/RDS [0000:5051,0000:505B,5ace:5050] diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 6a35d88fdbb2..46b6ac4b3105 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -3687,6 +3687,33 @@ struct saa7134_board saa7134_boards[] = { .amux = LINE2, }, }, + [SAA7134_BOARD_BEHOLD_407] = { + .name = "Beholder BeholdTV 407", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .tda9887_conf = TDA9887_PRESENT, + .gpiomask = 0xc0c000, + .inputs = {{ + .name = name_svideo, + .vmux = 8, + .amux = LINE1, + .gpio = 0xc0c000, + },{ + .name = name_comp1, + .vmux = 1, + .amux = LINE1, + .gpio = 0xc0c000, + },{ + .name = name_tv, + .vmux = 3, + .amux = TV, + .tv = 1, + .gpio = 0xc0c000, + }}, + }, [SAA7134_BOARD_BEHOLD_407FM] = { .name = "Beholder BeholdTV 407 FM", .audio_clock = 0x00187de7, -- cgit v1.2.3-59-g8ed1b From 98512f7b36ec412ea0461e9aab8f16c882df055d Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 7 Jan 2008 05:24:51 -0300 Subject: V4L/DVB (6976): drivers/media/radio/radio-sf16fmr2.c: fix error handling video_register_device() returns -EFOO on errr, not -1. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=9699 Reported-By: Signed-off-by: Andrew Morton Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-sf16fmr2.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c index c432c44bd634..f7c8b000404f 100644 --- a/drivers/media/radio/radio-sf16fmr2.c +++ b/drivers/media/radio/radio-sf16fmr2.c @@ -476,8 +476,7 @@ static int __init fmr2_init(void) return -EBUSY; } - if(video_register_device(&fmr2_radio, VFL_TYPE_RADIO, radio_nr)==-1) - { + if (video_register_device(&fmr2_radio, VFL_TYPE_RADIO, radio_nr) < 0) { release_region(io, 2); return -EINVAL; } -- cgit v1.2.3-59-g8ed1b From 09f83c4fc06b02597ad4458c2a6675b0872f0b5c Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 5 Jan 2008 20:00:09 -0300 Subject: V4L/DVB (6977): tda18271: clean up calibration initialization procedures Always initialize registers during attach. Perform IR Calibration during init if needed. Perform RF Calibration during init if needed for C2, only. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 37 +++++++++++++++++------------ drivers/media/dvb/frontends/tda18271-priv.h | 1 + 2 files changed, 23 insertions(+), 15 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index 55c17fc22275..1a86c9f7a7e4 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -29,7 +29,7 @@ MODULE_PARM_DESC(debug, "set debug level " /*---------------------------------------------------------------------*/ -static int tda18271_init(struct dvb_frontend *fe) +static int tda18271_ir_cal_init(struct dvb_frontend *fe) { struct tda18271_priv *priv = fe->tuner_priv; unsigned char *regs = priv->tda18271_regs; @@ -184,7 +184,7 @@ static int tda18271_read_thermometer(struct dvb_frontend *fe) } static int tda18271_rf_tracking_filters_correction(struct dvb_frontend *fe, - u32 freq, int tm_rfcal) + u32 freq) { struct tda18271_priv *priv = fe->tuner_priv; struct tda18271_rf_tracking_filter_cal *map = priv->rf_cal_state; @@ -224,7 +224,7 @@ static int tda18271_rf_tracking_filters_correction(struct dvb_frontend *fe, tda18271_lookup_map(fe, RF_CAL_DC_OVER_DT, &freq, &dc_over_dt); /* calculate temperature compensation */ - rfcal_comp = dc_over_dt * (tm_current - tm_rfcal); + rfcal_comp = dc_over_dt * (tm_current - priv->tm_rfcal); regs[R_EB14] = approx + rfcal_comp; tda18271_write_regs(fe, R_EB14, 1); @@ -554,8 +554,7 @@ static int tda18271_rf_tracking_filters_init(struct dvb_frontend *fe, u32 freq) return 0; } -static int tda18271_calc_rf_filter_curve(struct dvb_frontend *fe, - int *tm_rfcal) +static int tda18271_calc_rf_filter_curve(struct dvb_frontend *fe) { struct tda18271_priv *priv = fe->tuner_priv; unsigned int i; @@ -572,24 +571,21 @@ static int tda18271_calc_rf_filter_curve(struct dvb_frontend *fe, tda18271_rf_tracking_filters_init(fe, 1000 * priv->rf_cal_state[i].rfmax); - *tm_rfcal = tda18271_read_thermometer(fe); + priv->tm_rfcal = tda18271_read_thermometer(fe); return 0; } /* ------------------------------------------------------------------ */ -static int tda18271_init_cal(struct dvb_frontend *fe, int *tm) +static int tda18271_rf_cal_init(struct dvb_frontend *fe) { struct tda18271_priv *priv = fe->tuner_priv; if (priv->cal_initialized) return 0; - /* initialization */ - tda18271_init(fe); - - tda18271_calc_rf_filter_curve(fe, tm); + tda18271_calc_rf_filter_curve(fe); tda18271_por(fe); @@ -598,16 +594,27 @@ static int tda18271_init_cal(struct dvb_frontend *fe, int *tm) return 0; } +static int tda18271_init(struct dvb_frontend *fe) +{ + struct tda18271_priv *priv = fe->tuner_priv; + + /* initialization */ + tda18271_ir_cal_init(fe); + + if (priv->id == TDA18271HDC2) + tda18271_rf_cal_init(fe); + + return 0; +} + static int tda18271c2_tune(struct dvb_frontend *fe, u32 ifc, u32 freq, u32 bw, u8 std) { - int tm = 0; - tda_dbg("freq = %d, ifc = %d\n", freq, ifc); - tda18271_init_cal(fe, &tm); + tda18271_init(fe); - tda18271_rf_tracking_filters_correction(fe, freq, tm); + tda18271_rf_tracking_filters_correction(fe, freq); tda18271_channel_configuration(fe, ifc, freq, bw, std); diff --git a/drivers/media/dvb/frontends/tda18271-priv.h b/drivers/media/dvb/frontends/tda18271-priv.h index 6e04258ca6f9..7b06e0599dc5 100644 --- a/drivers/media/dvb/frontends/tda18271-priv.h +++ b/drivers/media/dvb/frontends/tda18271-priv.h @@ -105,6 +105,7 @@ struct tda18271_priv { enum tda18271_i2c_gate gate; enum tda18271_ver id; + unsigned int tm_rfcal; unsigned int cal_initialized:1; struct tda18271_map_layout *maps; -- cgit v1.2.3-59-g8ed1b From ccbac9bb174db457181f5f58fecf9cbc3020ea1d Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 6 Jan 2008 00:55:21 -0300 Subject: V4L/DVB (6978): tda18271: store frequency and bandwidth after successful tune Store last tuned frequency & bandwidth after successful tune. Clean up tune functions -- remove pointer to tune function in state structure, instead call tune function based on priv->id. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 46 ++++++++++++++++++++++++----- drivers/media/dvb/frontends/tda18271-priv.h | 3 -- 2 files changed, 38 insertions(+), 11 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index 1a86c9f7a7e4..c1da16ad07e7 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -770,6 +770,23 @@ static int tda18271c1_tune(struct dvb_frontend *fe, return 0; } +static inline int tda18271_tune(struct dvb_frontend *fe, + u32 ifc, u32 freq, u32 bw, u8 std) +{ + struct tda18271_priv *priv = fe->tuner_priv; + int ret = -EINVAL; + + switch (priv->id) { + case TDA18271HDC1: + ret = tda18271c1_tune(fe, ifc, freq, bw, std); + break; + case TDA18271HDC2: + ret = tda18271c2_tune(fe, ifc, freq, bw, std); + break; + } + return ret; +} + /* ------------------------------------------------------------------ */ static int tda18271_set_params(struct dvb_frontend *fe, @@ -777,12 +794,11 @@ static int tda18271_set_params(struct dvb_frontend *fe, { struct tda18271_priv *priv = fe->tuner_priv; struct tda18271_std_map *std_map = &priv->std; + int ret; u8 std; u16 sgIF; u32 bw, freq = params->frequency; - BUG_ON(!priv->tune); - priv->mode = TDA18271_DIGITAL; /* see table 22 */ @@ -833,7 +849,16 @@ static int tda18271_set_params(struct dvb_frontend *fe, return -EINVAL; } - return priv->tune(fe, sgIF * 1000, freq, bw, std); + ret = tda18271_tune(fe, sgIF * 1000, freq, bw, std); + + if (ret < 0) + goto fail; + + priv->frequency = freq; + priv->bandwidth = (fe->ops.info.type == FE_OFDM) ? + params->u.ofdm.bandwidth : 0; +fail: + return ret; } static int tda18271_set_analog_params(struct dvb_frontend *fe, @@ -842,12 +867,11 @@ static int tda18271_set_analog_params(struct dvb_frontend *fe, struct tda18271_priv *priv = fe->tuner_priv; struct tda18271_std_map *std_map = &priv->std; char *mode; + int ret; u8 std; u16 sgIF; u32 freq = params->frequency * 62500; - BUG_ON(!priv->tune); - priv->mode = TDA18271_ANALOG; if (params->std & V4L2_STD_MN) { @@ -886,7 +910,15 @@ static int tda18271_set_analog_params(struct dvb_frontend *fe, tda_dbg("setting tda18271 to system %s\n", mode); - return priv->tune(fe, sgIF * 1000, freq, 0, std); + ret = tda18271_tune(fe, sgIF * 1000, freq, 0, std); + + if (ret < 0) + goto fail; + + priv->frequency = freq; + priv->bandwidth = 0; +fail: + return ret; } static int tda18271_release(struct dvb_frontend *fe) @@ -986,12 +1018,10 @@ static int tda18271_get_id(struct dvb_frontend *fe) case 3: name = "TDA18271HD/C1"; priv->id = TDA18271HDC1; - priv->tune = tda18271c1_tune; break; case 4: name = "TDA18271HD/C2"; priv->id = TDA18271HDC2; - priv->tune = tda18271c2_tune; break; default: name = "Unknown device"; diff --git a/drivers/media/dvb/frontends/tda18271-priv.h b/drivers/media/dvb/frontends/tda18271-priv.h index 7b06e0599dc5..b4d1ab770ca2 100644 --- a/drivers/media/dvb/frontends/tda18271-priv.h +++ b/drivers/media/dvb/frontends/tda18271-priv.h @@ -112,9 +112,6 @@ struct tda18271_priv { struct tda18271_std_map std; struct tda18271_rf_tracking_filter_cal rf_cal_state[8]; - int (*tune) (struct dvb_frontend *fe, - u32 ifc, u32 freq, u32 bw, u8 std); - u32 frequency; u32 bandwidth; }; -- cgit v1.2.3-59-g8ed1b From 8d316bf54b2a1965f9460d0ad9d80850d2c7afb3 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 6 Jan 2008 15:31:35 -0300 Subject: V4L/DVB (6979): tda18271: use a mutex to protect state in critical sections Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 20 ++++++++++++++++++++ drivers/media/dvb/frontends/tda18271-priv.h | 3 +++ 2 files changed, 23 insertions(+) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index c1da16ad07e7..e860f4c009c2 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -598,26 +598,36 @@ static int tda18271_init(struct dvb_frontend *fe) { struct tda18271_priv *priv = fe->tuner_priv; + mutex_lock(&priv->lock); + /* initialization */ tda18271_ir_cal_init(fe); if (priv->id == TDA18271HDC2) tda18271_rf_cal_init(fe); + mutex_unlock(&priv->lock); + return 0; } static int tda18271c2_tune(struct dvb_frontend *fe, u32 ifc, u32 freq, u32 bw, u8 std) { + struct tda18271_priv *priv = fe->tuner_priv; + tda_dbg("freq = %d, ifc = %d\n", freq, ifc); tda18271_init(fe); + mutex_lock(&priv->lock); + tda18271_rf_tracking_filters_correction(fe, freq); tda18271_channel_configuration(fe, ifc, freq, bw, std); + mutex_unlock(&priv->lock); + return 0; } @@ -632,6 +642,8 @@ static int tda18271c1_tune(struct dvb_frontend *fe, tda18271_init(fe); + mutex_lock(&priv->lock); + tda_dbg("freq = %d, ifc = %d\n", freq, ifc); /* RF tracking filter calibration */ @@ -766,6 +778,7 @@ static int tda18271c1_tune(struct dvb_frontend *fe, tda18271_write_regs(fe, R_TM, 15); msleep(5); + mutex_unlock(&priv->lock); return 0; } @@ -1012,7 +1025,9 @@ static int tda18271_get_id(struct dvb_frontend *fe) char *name; int ret = 0; + mutex_lock(&priv->lock); tda18271_read_regs(fe); + mutex_unlock(&priv->lock); switch (regs[R_ID] & 0x7f) { case 3: @@ -1065,6 +1080,7 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, priv->i2c_adap = i2c; priv->gate = (cfg) ? cfg->gate : TDA18271_GATE_AUTO; priv->cal_initialized = false; + mutex_init(&priv->lock); fe->tuner_priv = priv; @@ -1084,8 +1100,12 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, if (tda18271_debug & DBG_MAP) tda18271_dump_std_map(fe); + mutex_lock(&priv->lock); + tda18271_init_regs(fe); + mutex_unlock(&priv->lock); + return fe; fail: tda18271_release(fe); diff --git a/drivers/media/dvb/frontends/tda18271-priv.h b/drivers/media/dvb/frontends/tda18271-priv.h index b4d1ab770ca2..af89cfab0066 100644 --- a/drivers/media/dvb/frontends/tda18271-priv.h +++ b/drivers/media/dvb/frontends/tda18271-priv.h @@ -23,6 +23,7 @@ #include #include +#include #include "tda18271.h" #define R_ID 0x00 /* ID byte */ @@ -112,6 +113,8 @@ struct tda18271_priv { struct tda18271_std_map std; struct tda18271_rf_tracking_filter_cal rf_cal_state[8]; + struct mutex lock; + u32 frequency; u32 bandwidth; }; -- cgit v1.2.3-59-g8ed1b From b3d98135aa6e462d7e3f42a86d12483a9003a4da Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 7 Jan 2008 09:30:31 -0300 Subject: V4L/DVB (6981): Fix bugzillas 9686 and 9691 IR were not working for Winfast XP 2000 TV. Gabor Nyekhelyi wrote a hack some time ago: http://marc.info/?l=linux-video&m=116362609323281&w=2 This patch fixes CodingStyle and commits the hack. I suspect that the proper solution would be to find the proper mask_keydown for this IR. Anyway, better to have this patch as a workaround. Thanks to Stafan Talpalaru for pointing the issue. CC: Gabor Nyekhelyi CC: Stafan Talpalaru Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bt8xx/bttv-input.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c index e7c521b8444a..fc9ecb21eec6 100644 --- a/drivers/media/video/bt8xx/bttv-input.c +++ b/drivers/media/video/bt8xx/bttv-input.c @@ -69,6 +69,11 @@ static void ir_handle_key(struct bttv *btv) (ir->mask_keyup && (0 == (gpio & ir->mask_keyup)))) { ir_input_keydown(ir->dev,&ir->ir,data,data); } else { + /* HACK: Probably, ir->mask_keydown is missing + for this board */ + if (btv->c.type == BTTV_BOARD_WINFAST2000) + ir_input_keydown(ir->dev, &ir->ir, data, data); + ir_input_nokey(ir->dev,&ir->ir); } -- cgit v1.2.3-59-g8ed1b From a4f263b587573f47cc6bc7ad85e5f650169d48f6 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 6 Jan 2008 15:52:56 -0300 Subject: V4L/DVB (6986): tda18271: share state between analog and digital tuner instances Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 93 ++++++++++++++++++++++------- drivers/media/dvb/frontends/tda18271-priv.h | 3 + drivers/media/video/tda8290.c | 9 ++- 3 files changed, 81 insertions(+), 24 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index e860f4c009c2..aa93e1550627 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -27,6 +27,9 @@ module_param_named(debug, tda18271_debug, int, 0644); MODULE_PARM_DESC(debug, "set debug level " "(info=1, map=2, reg=4, adv=8 (or-able))"); +static LIST_HEAD(tda18271_list); +static DEFINE_MUTEX(tda18271_list_mutex); + /*---------------------------------------------------------------------*/ static int tda18271_ir_cal_init(struct dvb_frontend *fe) @@ -936,8 +939,24 @@ fail: static int tda18271_release(struct dvb_frontend *fe) { - kfree(fe->tuner_priv); + struct tda18271_priv *priv = fe->tuner_priv; + + mutex_lock(&tda18271_list_mutex); + + priv->count--; + + if (!priv->count) { + tda_dbg("destroying instance @ %d-%04x\n", + i2c_adapter_id(priv->i2c_adap), + priv->i2c_addr); + list_del(&priv->tda18271_list); + + kfree(priv); + } + mutex_unlock(&tda18271_list_mutex); + fe->tuner_priv = NULL; + return 0; } @@ -1071,43 +1090,73 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, struct tda18271_config *cfg) { struct tda18271_priv *priv = NULL; + int state_found = 0; + + mutex_lock(&tda18271_list_mutex); + + list_for_each_entry(priv, &tda18271_list, tda18271_list) { + if ((i2c_adapter_id(priv->i2c_adap) == i2c_adapter_id(i2c)) && + (priv->i2c_addr == addr)) { + tda_dbg("attaching existing tuner @ %d-%04x\n", + i2c_adapter_id(priv->i2c_adap), + priv->i2c_addr); + priv->count++; + fe->tuner_priv = priv; + state_found = 1; + /* allow dvb driver to override i2c gate setting */ + if ((cfg) && (cfg->gate != TDA18271_GATE_ANALOG)) + priv->gate = cfg->gate; + break; + } + } + if (state_found == 0) { + tda_dbg("creating new tuner instance @ %d-%04x\n", + i2c_adapter_id(i2c), addr); + + priv = kzalloc(sizeof(struct tda18271_priv), GFP_KERNEL); + if (priv == NULL) { + mutex_unlock(&tda18271_list_mutex); + return NULL; + } - priv = kzalloc(sizeof(struct tda18271_priv), GFP_KERNEL); - if (priv == NULL) - return NULL; + priv->i2c_addr = addr; + priv->i2c_adap = i2c; + priv->gate = (cfg) ? cfg->gate : TDA18271_GATE_AUTO; + priv->cal_initialized = false; + mutex_init(&priv->lock); + priv->count++; - priv->i2c_addr = addr; - priv->i2c_adap = i2c; - priv->gate = (cfg) ? cfg->gate : TDA18271_GATE_AUTO; - priv->cal_initialized = false; - mutex_init(&priv->lock); + fe->tuner_priv = priv; - fe->tuner_priv = priv; + list_add_tail(&priv->tda18271_list, &tda18271_list); - if (tda18271_get_id(fe) < 0) - goto fail; + if (tda18271_get_id(fe) < 0) + goto fail; - if (tda18271_assign_map_layout(fe) < 0) - goto fail; + if (tda18271_assign_map_layout(fe) < 0) + goto fail; - memcpy(&fe->ops.tuner_ops, &tda18271_tuner_ops, - sizeof(struct dvb_tuner_ops)); + mutex_lock(&priv->lock); + tda18271_init_regs(fe); + mutex_unlock(&priv->lock); + } /* override default std map with values in config struct */ if ((cfg) && (cfg->std_map)) tda18271_update_std_map(fe, cfg->std_map); - if (tda18271_debug & DBG_MAP) - tda18271_dump_std_map(fe); - - mutex_lock(&priv->lock); + mutex_unlock(&tda18271_list_mutex); - tda18271_init_regs(fe); + memcpy(&fe->ops.tuner_ops, &tda18271_tuner_ops, + sizeof(struct dvb_tuner_ops)); - mutex_unlock(&priv->lock); + if (tda18271_debug & DBG_MAP) + tda18271_dump_std_map(fe); return fe; fail: + mutex_unlock(&tda18271_list_mutex); + tda18271_release(fe); return NULL; } diff --git a/drivers/media/dvb/frontends/tda18271-priv.h b/drivers/media/dvb/frontends/tda18271-priv.h index af89cfab0066..5c04d63ae849 100644 --- a/drivers/media/dvb/frontends/tda18271-priv.h +++ b/drivers/media/dvb/frontends/tda18271-priv.h @@ -102,10 +102,13 @@ struct tda18271_priv { struct i2c_adapter *i2c_adap; unsigned char tda18271_regs[TDA18271_NUM_REGS]; + struct list_head tda18271_list; + enum tda18271_mode mode; enum tda18271_i2c_gate gate; enum tda18271_ver id; + unsigned int count; unsigned int tm_rfcal; unsigned int cal_initialized:1; diff --git a/drivers/media/video/tda8290.c b/drivers/media/video/tda8290.c index eab530708a49..4ac7c0438896 100644 --- a/drivers/media/video/tda8290.c +++ b/drivers/media/video/tda8290.c @@ -502,8 +502,13 @@ static void tda8290_init_tuner(struct dvb_frontend *fe) static void tda829x_release(struct dvb_frontend *fe) { - if (fe->ops.tuner_ops.release) - fe->ops.tuner_ops.release(fe); + struct tda8290_priv *priv = fe->analog_demod_priv; + + /* dont try to release the tuner + * if we didn't attach it from this module */ + if ((priv->ver > TDA8290) && (priv->ver > TDA8295)) + if (fe->ops.tuner_ops.release) + fe->ops.tuner_ops.release(fe); kfree(fe->analog_demod_priv); fe->analog_demod_priv = NULL; -- cgit v1.2.3-59-g8ed1b From c353f42f752d9b47661ff83b947986f6de948b61 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Tue, 8 Jan 2008 10:38:10 -0300 Subject: V4L/DVB (6987): tda18271: add support for fm radio Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 42 ++++++++++++++++++--------- drivers/media/dvb/frontends/tda18271-tables.c | 2 ++ drivers/media/dvb/frontends/tda18271.h | 1 + 3 files changed, 32 insertions(+), 13 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index aa93e1550627..7d218819b285 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -49,7 +49,8 @@ static int tda18271_ir_cal_init(struct dvb_frontend *fe) /* ------------------------------------------------------------------ */ static int tda18271_channel_configuration(struct dvb_frontend *fe, - u32 ifc, u32 freq, u32 bw, u8 std) + u32 ifc, u32 freq, u32 bw, u8 std, + int radio) { struct tda18271_priv *priv = fe->tuner_priv; unsigned char *regs = priv->tda18271_regs; @@ -76,7 +77,11 @@ static int tda18271_channel_configuration(struct dvb_frontend *fe, regs[R_MPD] |= 0x80; /* IF notch = 1 */ break; } - regs[R_EP4] &= ~0x80; /* FM_RFn: turn this bit on only for fm radio */ + + if (radio) + regs[R_EP4] |= 0x80; + else + regs[R_EP4] &= ~0x80; /* update RF_TOP / IF_TOP */ switch (priv->mode) { @@ -615,7 +620,7 @@ static int tda18271_init(struct dvb_frontend *fe) } static int tda18271c2_tune(struct dvb_frontend *fe, - u32 ifc, u32 freq, u32 bw, u8 std) + u32 ifc, u32 freq, u32 bw, u8 std, int radio) { struct tda18271_priv *priv = fe->tuner_priv; @@ -627,7 +632,7 @@ static int tda18271c2_tune(struct dvb_frontend *fe, tda18271_rf_tracking_filters_correction(fe, freq); - tda18271_channel_configuration(fe, ifc, freq, bw, std); + tda18271_channel_configuration(fe, ifc, freq, bw, std, radio); mutex_unlock(&priv->lock); @@ -637,7 +642,7 @@ static int tda18271c2_tune(struct dvb_frontend *fe, /* ------------------------------------------------------------------ */ static int tda18271c1_tune(struct dvb_frontend *fe, - u32 ifc, u32 freq, u32 bw, u8 std) + u32 ifc, u32 freq, u32 bw, u8 std, int radio) { struct tda18271_priv *priv = fe->tuner_priv; unsigned char *regs = priv->tda18271_regs; @@ -769,7 +774,10 @@ static int tda18271c1_tune(struct dvb_frontend *fe, break; } - regs[R_EP4] &= ~0x80; /* turn this bit on only for fm */ + if (radio) + regs[R_EP4] |= 0x80; + else + regs[R_EP4] &= ~0x80; /* image rejection validity */ tda18271_calc_ir_measure(fe, &freq); @@ -787,17 +795,17 @@ static int tda18271c1_tune(struct dvb_frontend *fe, } static inline int tda18271_tune(struct dvb_frontend *fe, - u32 ifc, u32 freq, u32 bw, u8 std) + u32 ifc, u32 freq, u32 bw, u8 std, int radio) { struct tda18271_priv *priv = fe->tuner_priv; int ret = -EINVAL; switch (priv->id) { case TDA18271HDC1: - ret = tda18271c1_tune(fe, ifc, freq, bw, std); + ret = tda18271c1_tune(fe, ifc, freq, bw, std, radio); break; case TDA18271HDC2: - ret = tda18271c2_tune(fe, ifc, freq, bw, std); + ret = tda18271c2_tune(fe, ifc, freq, bw, std, radio); break; } return ret; @@ -865,7 +873,7 @@ static int tda18271_set_params(struct dvb_frontend *fe, return -EINVAL; } - ret = tda18271_tune(fe, sgIF * 1000, freq, bw, std); + ret = tda18271_tune(fe, sgIF * 1000, freq, bw, std, 0); if (ret < 0) goto fail; @@ -883,14 +891,20 @@ static int tda18271_set_analog_params(struct dvb_frontend *fe, struct tda18271_priv *priv = fe->tuner_priv; struct tda18271_std_map *std_map = &priv->std; char *mode; - int ret; + int ret, radio = 0; u8 std; u16 sgIF; u32 freq = params->frequency * 62500; priv->mode = TDA18271_ANALOG; - if (params->std & V4L2_STD_MN) { + if (params->mode == V4L2_TUNER_RADIO) { + radio = 1; + freq = freq / 1000; + std = std_map->fm_radio.std_bits; + sgIF = std_map->fm_radio.if_freq; + mode = "fm"; + } else if (params->std & V4L2_STD_MN) { std = std_map->atv_mn.std_bits; sgIF = std_map->atv_mn.if_freq; mode = "MN"; @@ -926,7 +940,7 @@ static int tda18271_set_analog_params(struct dvb_frontend *fe, tda_dbg("setting tda18271 to system %s\n", mode); - ret = tda18271_tune(fe, sgIF * 1000, freq, 0, std); + ret = tda18271_tune(fe, sgIF * 1000, freq, 0, std, radio); if (ret < 0) goto fail; @@ -994,6 +1008,7 @@ static int tda18271_dump_std_map(struct dvb_frontend *fe) struct tda18271_std_map *std = &priv->std; tda_dbg("========== STANDARD MAP SETTINGS ==========\n"); + tda18271_dump_std_item(fm_radio, "fm"); tda18271_dump_std_item(atv_b, "pal b"); tda18271_dump_std_item(atv_dk, "pal dk"); tda18271_dump_std_item(atv_gh, "pal gh"); @@ -1020,6 +1035,7 @@ static int tda18271_update_std_map(struct dvb_frontend *fe, if (!map) return -EINVAL; + tda18271_update_std(fm_radio, "fm"); tda18271_update_std(atv_b, "atv b"); tda18271_update_std(atv_dk, "atv dk"); tda18271_update_std(atv_gh, "atv gh"); diff --git a/drivers/media/dvb/frontends/tda18271-tables.c b/drivers/media/dvb/frontends/tda18271-tables.c index 0402c7dab19d..e94afcfdc5bc 100644 --- a/drivers/media/dvb/frontends/tda18271-tables.c +++ b/drivers/media/dvb/frontends/tda18271-tables.c @@ -1187,6 +1187,7 @@ fail: /*---------------------------------------------------------------------*/ static struct tda18271_std_map tda18271c1_std_map = { + .fm_radio = { .if_freq = 1250, .std_bits = 0x18 }, .atv_b = { .if_freq = 6750, .std_bits = 0x0e }, .atv_dk = { .if_freq = 7750, .std_bits = 0x0f }, .atv_gh = { .if_freq = 7750, .std_bits = 0x0f }, @@ -1203,6 +1204,7 @@ static struct tda18271_std_map tda18271c1_std_map = { }; static struct tda18271_std_map tda18271c2_std_map = { + .fm_radio = { .if_freq = 1250, .std_bits = 0x18 }, .atv_b = { .if_freq = 6000, .std_bits = 0x0d }, .atv_dk = { .if_freq = 6900, .std_bits = 0x0e }, .atv_gh = { .if_freq = 7100, .std_bits = 0x0e }, diff --git a/drivers/media/dvb/frontends/tda18271.h b/drivers/media/dvb/frontends/tda18271.h index 9ccfa6e8b5a9..24b0e35a2ab3 100644 --- a/drivers/media/dvb/frontends/tda18271.h +++ b/drivers/media/dvb/frontends/tda18271.h @@ -30,6 +30,7 @@ struct tda18271_std_map_item { }; struct tda18271_std_map { + struct tda18271_std_map_item fm_radio; struct tda18271_std_map_item atv_b; struct tda18271_std_map_item atv_dk; struct tda18271_std_map_item atv_gh; -- cgit v1.2.3-59-g8ed1b From cf04d29c4868a783b3e994e4a19f78ce22ba2d93 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 9 Jan 2008 00:34:30 -0300 Subject: V4L/DVB (6988): tda18271: give calibration debug a separate debug mask We don't usually want to see the calibration debug messages, but sometimes it is useful. Assign it to a separate debug mask. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 6 +++--- drivers/media/dvb/frontends/tda18271-priv.h | 2 ++ 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index 7d218819b285..0b41b9513944 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -25,7 +25,7 @@ int tda18271_debug; module_param_named(debug, tda18271_debug, int, 0644); MODULE_PARM_DESC(debug, "set debug level " - "(info=1, map=2, reg=4, adv=8 (or-able))"); + "(info=1, map=2, reg=4, adv=8, cal=16 (or-able))"); static LIST_HEAD(tda18271_list); static DEFINE_MUTEX(tda18271_list_mutex); @@ -459,7 +459,7 @@ static int tda18271_powerscan(struct dvb_frontend *fe, } else bcal = 0; - tda_dbg("bcal = %d, freq_in = %d, freq_out = %d (freq = %d)\n", + tda_cal("bcal = %d, freq_in = %d, freq_out = %d (freq = %d)\n", bcal, *freq_in, *freq_out, freq); return bcal; @@ -522,7 +522,7 @@ static int tda18271_rf_tracking_filters_init(struct dvb_frontend *fe, u32 freq) for (rf = RF1; rf <= RF3; rf++) { if (0 == rf_default[rf]) return 0; - tda_dbg("freq = %d, rf = %d\n", freq, rf); + tda_cal("freq = %d, rf = %d\n", freq, rf); /* look for optimized calibration frequency */ bcal = tda18271_powerscan(fe, &rf_default[rf], &rf_freq[rf]); diff --git a/drivers/media/dvb/frontends/tda18271-priv.h b/drivers/media/dvb/frontends/tda18271-priv.h index 5c04d63ae849..080efb3991ed 100644 --- a/drivers/media/dvb/frontends/tda18271-priv.h +++ b/drivers/media/dvb/frontends/tda18271-priv.h @@ -130,6 +130,7 @@ extern int tda18271_debug; #define DBG_MAP 2 #define DBG_REG 4 #define DBG_ADV 8 +#define DBG_CAL 16 #define tda_printk(kern, fmt, arg...) \ printk(kern "%s: " fmt, __FUNCTION__, ##arg) @@ -144,6 +145,7 @@ extern int tda18271_debug; #define tda_dbg(fmt, arg...) dprintk(KERN_DEBUG, DBG_INFO, fmt, ##arg) #define tda_map(fmt, arg...) dprintk(KERN_DEBUG, DBG_MAP, fmt, ##arg) #define tda_reg(fmt, arg...) dprintk(KERN_DEBUG, DBG_REG, fmt, ##arg) +#define tda_cal(fmt, arg...) dprintk(KERN_DEBUG, DBG_CAL, fmt, ##arg) /*---------------------------------------------------------------------*/ -- cgit v1.2.3-59-g8ed1b From 006ed1ecf2c62659e5dd902350a7eb209b8a5257 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 9 Jan 2008 10:44:27 -0300 Subject: V4L/DVB (6989): tda18271: clean up chip id logic in tda829x_release This test is easier to read. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tda8290.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/tda8290.c b/drivers/media/video/tda8290.c index 4ac7c0438896..3e593a3d9031 100644 --- a/drivers/media/video/tda8290.c +++ b/drivers/media/video/tda8290.c @@ -504,9 +504,9 @@ static void tda829x_release(struct dvb_frontend *fe) { struct tda8290_priv *priv = fe->analog_demod_priv; - /* dont try to release the tuner - * if we didn't attach it from this module */ - if ((priv->ver > TDA8290) && (priv->ver > TDA8295)) + /* only try to release the tuner if we've + * attached it from within this module */ + if (priv->ver & (TDA18271 | TDA8275 | TDA8275A)) if (fe->ops.tuner_ops.release) fe->ops.tuner_ops.release(fe); -- cgit v1.2.3-59-g8ed1b From 6d8ea8621f49a1cc486de4bf893db9743d0577bf Mon Sep 17 00:00:00 2001 From: hermann pitton Date: Mon, 7 Jan 2008 22:36:09 -0300 Subject: V4L/DVB (6992): saa7134: remove Beholder devices without eeprom from auto detection As in the past, we should not allow to auto detect like this, since all saa7130 and saa7134 cards without eeprom will be detected as such Beholder cards then. Signed-off-by: Hermann Pitton Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-cards.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 46b6ac4b3105..0e3d2a739326 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -4676,24 +4676,12 @@ struct pci_device_id saa7134_pci_tbl[] = { .subvendor = 0x1461, /* Avermedia Technologies Inc */ .subdevice = 0xf01d, /* AVerTV DVB-T Super 007 */ .driver_data = SAA7134_BOARD_AVERMEDIA_SUPER_007, - },{ - .vendor = PCI_VENDOR_ID_PHILIPS, - .device = PCI_DEVICE_ID_PHILIPS_SAA7130, - .subvendor = 0x1131, - .subdevice = 0x0000, - .driver_data = SAA7134_BOARD_BEHOLD_401, },{ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7130, .subvendor = 0x0000, .subdevice = 0x4016, .driver_data = SAA7134_BOARD_BEHOLD_401, - },{ - .vendor = PCI_VENDOR_ID_PHILIPS, - .device = PCI_DEVICE_ID_PHILIPS_SAA7134, - .subvendor = 0x1131, - .subdevice = 0x0000, - .driver_data = SAA7134_BOARD_BEHOLD_403FM, },{ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7134, -- cgit v1.2.3-59-g8ed1b From e9ca1c79f2868d26c3e74ff3f20d5fa7d30724c5 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 9 Jan 2008 21:35:56 -0300 Subject: V4L/DVB (6993): Fix CARDLIST.saa7134 Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.saa7134 | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index fda570e50fa8..fe8514e06d26 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -116,9 +116,9 @@ 115 -> Sabrent PCMCIA TV-PCB05 [0919:2003] 116 -> 10MOONS TM300 TV Card [1131:2304] 117 -> Avermedia Super 007 [1461:f01d] -118 -> Beholder BeholdTV 401 [1131:0000,0000:4016] +118 -> Beholder BeholdTV 401 [0000:4016] 119 -> Beholder BeholdTV 403 [0000:4036] -120 -> Beholder BeholdTV 403 FM [1131:0000,0000:4037] +120 -> Beholder BeholdTV 403 FM [0000:4037] 121 -> Beholder BeholdTV 405 [0000:4050] 122 -> Beholder BeholdTV 405 FM [0000:4051] 123 -> Beholder BeholdTV 407 [0000:4070] -- cgit v1.2.3-59-g8ed1b From eeec4b3853a8af0cd2b42af24b9e8fd0e0ef1f8a Mon Sep 17 00:00:00 2001 From: Thierry MERLE Date: Wed, 9 Jan 2008 17:33:53 -0300 Subject: V4L/DVB (6994): usbvision: add Pinnacle Studio PCTV USB (NTSC) FM V3 Add the "Pinnacle Studio PCTV USB (NTSC) FM" device. This is the third occurrence of the same device designation... Signed-off-by: Thierry MERLE Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.usbvision | 1 + drivers/media/video/usbvision/usbvision-cards.c | 18 +++++++++++++++++- drivers/media/video/usbvision/usbvision-cards.h | 1 + 3 files changed, 19 insertions(+), 1 deletion(-) diff --git a/Documentation/video4linux/CARDLIST.usbvision b/Documentation/video4linux/CARDLIST.usbvision index 3d6850ef0245..0b72d3fee17e 100644 --- a/Documentation/video4linux/CARDLIST.usbvision +++ b/Documentation/video4linux/CARDLIST.usbvision @@ -62,3 +62,4 @@ 61 -> Pinnacle Studio Linx Video input cable (PAL) [2304:0301] 62 -> Pinnacle PCTV Bungee USB (PAL) FM [2304:0419] 63 -> Hauppauge WinTv-USB [2400:4200] + 64 -> Pinnacle Studio PCTV USB (NTSC) FM V3 [2304:0113] diff --git a/drivers/media/video/usbvision/usbvision-cards.c b/drivers/media/video/usbvision/usbvision-cards.c index f09eb102731b..503b13beb922 100644 --- a/drivers/media/video/usbvision/usbvision-cards.c +++ b/drivers/media/video/usbvision/usbvision-cards.c @@ -901,6 +901,20 @@ struct usbvision_device_data_st usbvision_device_data[] = { .Y_Offset = -1, .ModelString = "Pinnacle Studio PCTV USB (NTSC) FM", }, + [PINNA_PCTV_USB_NTSC_FM_V3] = { + .Interface = -1, + .Codec = CODEC_SAA7111, + .VideoChannels = 3, + .VideoNorm = V4L2_STD_NTSC, + .AudioChannels = 1, + .Radio = 1, + .vbi = 1, + .Tuner = 1, + .TunerType = TUNER_PHILIPS_NTSC_M, + .X_Offset = -1, + .Y_Offset = -1, + .ModelString = "Pinnacle Studio PCTV USB (NTSC) FM V3", + }, [PINNA_PCTV_USB_PAL_FM_V2] = { .Interface = -1, .Codec = CODEC_SAA7113, @@ -1044,7 +1058,7 @@ struct usb_device_id usbvision_table [] = { { USB_DEVICE(0x0573, 0x4d2a), .driver_info=HPG_WINTV_PRO_NTSC_MN }, { USB_DEVICE(0x0573, 0x4d2b), .driver_info=HPG_WINTV_PRO_NTSC_MN_V2 }, { USB_DEVICE(0x0573, 0x4d2c), .driver_info=HPG_WINTV_PRO_PAL }, - { USB_DEVICE(0x0573, 0x4d20), .driver_info=HPG_WINTV_PRO_NTSC_MN_V3 }, + { USB_DEVICE(0x0573, 0x4d20), .driver_info = HPG_WINTV_PRO_NTSC_MN_V3 }, { USB_DEVICE(0x0573, 0x4d21), .driver_info=HPG_WINTV_PRO_PAL_BG }, { USB_DEVICE(0x0573, 0x4d22), .driver_info=HPG_WINTV_PRO_PAL_I }, { USB_DEVICE(0x0573, 0x4d23), .driver_info=HPG_WINTV_PRO_PAL_SECAM_L }, @@ -1074,6 +1088,8 @@ struct usb_device_id usbvision_table [] = { { USB_DEVICE(0x2304, 0x0110), .driver_info=PINNA_PCTV_USB_PAL_FM }, { USB_DEVICE(0x2304, 0x0111), .driver_info=MIRO_PCTV_USB }, { USB_DEVICE(0x2304, 0x0112), .driver_info=PINNA_PCTV_USB_NTSC_FM }, + { USB_DEVICE(0x2304, 0x0113), + .driver_info = PINNA_PCTV_USB_NTSC_FM_V3 }, { USB_DEVICE(0x2304, 0x0210), .driver_info=PINNA_PCTV_USB_PAL_FM_V2 }, { USB_DEVICE(0x2304, 0x0212), .driver_info=PINNA_PCTV_USB_NTSC_FM_V2 }, { USB_DEVICE(0x2304, 0x0214), .driver_info=PINNA_PCTV_USB_PAL_FM_V3 }, diff --git a/drivers/media/video/usbvision/usbvision-cards.h b/drivers/media/video/usbvision/usbvision-cards.h index 512c5cee4145..9c6ad22960d8 100644 --- a/drivers/media/video/usbvision/usbvision-cards.h +++ b/drivers/media/video/usbvision/usbvision-cards.h @@ -62,5 +62,6 @@ #define PINNA_LINX_VD_IN_CAB_PAL 61 #define PINNA_PCTV_BUNGEE_PAL_FM 62 #define HPG_WINTV 63 +#define PINNA_PCTV_USB_NTSC_FM_V3 64 extern const int usbvision_device_data_size; -- cgit v1.2.3-59-g8ed1b From c6243d9c3de82e46467c88898db45ca14b6843a0 Mon Sep 17 00:00:00 2001 From: Thierry MERLE Date: Wed, 9 Jan 2008 17:34:53 -0300 Subject: V4L/DVB (6995): ubvision: add adjust_X_Offset/adjust_Y_Offset parms Add adjust_X_Offset/adjust_Y_Offset module parameters to allow users to tune X and Y picture offsets for their almost-working tuners without repetitive recompilation. Signed-off-by: Thierry MERLE Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/usbvision/usbvision-core.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/media/video/usbvision/usbvision-core.c b/drivers/media/video/usbvision/usbvision-core.c index 9e404b87d000..1e52a0387aa5 100644 --- a/drivers/media/video/usbvision/usbvision-core.c +++ b/drivers/media/video/usbvision/usbvision-core.c @@ -69,6 +69,15 @@ static int SwitchSVideoInput = 0; // To help people with Black and White outpu module_param(SwitchSVideoInput, int, 0444); MODULE_PARM_DESC(SwitchSVideoInput, " Set the S-Video input. Some cables and input device are wired differently. Default: 0 (Off)"); +static unsigned int adjust_X_Offset = -1; +module_param(adjust_X_Offset, int, 0644); +MODULE_PARM_DESC(adjust_X_Offset, "adjust X offset display [core]"); + +static unsigned int adjust_Y_Offset = -1; +module_param(adjust_Y_Offset, int, 0644); +MODULE_PARM_DESC(adjust_Y_Offset, "adjust Y offset display [core]"); + + #define ENABLE_HEXDUMP 0 /* Enable if you need it */ @@ -2097,11 +2106,21 @@ int usbvision_set_input(struct usb_usbvision *usbvision) value[5]=(usbvision_device_data[usbvision->DevModel].X_Offset & 0x0300) >> 8; } + if (adjust_X_Offset != -1) { + value[4] = adjust_X_Offset & 0xff; + value[5] = (adjust_X_Offset & 0x0300) >> 8; + } + if (usbvision_device_data[usbvision->DevModel].Y_Offset >= 0) { value[6]=usbvision_device_data[usbvision->DevModel].Y_Offset & 0xff; value[7]=(usbvision_device_data[usbvision->DevModel].Y_Offset & 0x0300) >> 8; } + if (adjust_Y_Offset != -1) { + value[6] = adjust_Y_Offset & 0xff; + value[7] = (adjust_Y_Offset & 0x0300) >> 8; + } + rc = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1), USBVISION_OP_CODE, /* USBVISION specific code */ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT, 0, -- cgit v1.2.3-59-g8ed1b From d05051c82e0e8ff748e9c9a06a061bda3ad656e5 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 10 Jan 2008 07:33:03 -0300 Subject: V4L/DVB (6997): Replace a very dirty hack on videobuf for a clean wait_event In order to videobuf_iolock to work, mmap_mapper should be called first. Otherwise, an OOPS is generated. On some cases, .mmap file handler used to took some time to be called. On those situations, mmap_mmapper() were called after iolock. This patch properly waits for mmap_mapper to be called, otherwise generating an error. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/videobuf-core.c | 15 +++++++++++---- include/media/videobuf-core.h | 2 ++ 2 files changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/videobuf-core.c b/drivers/media/video/videobuf-core.c index 43fe3f78c8df..c3adbd686ffe 100644 --- a/drivers/media/video/videobuf-core.c +++ b/drivers/media/video/videobuf-core.c @@ -98,13 +98,15 @@ int videobuf_iolock(struct videobuf_queue *q, struct videobuf_buffer *vb, MAGIC_CHECK(vb->magic, MAGIC_BUFFER); MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS); - /* FIXME: This is required to avoid OOPS on some cases, + /* This is required to avoid OOPS on some cases, since mmap_mapper() method should be called before _iolock. On some cases, the mmap_mapper() is called only after scheduling. - - However, this way is just too dirty! Better to wait for some event. */ - schedule_timeout(HZ); + wait_event_timeout(vb->done, q->is_mmapped, msecs_to_jiffies(100)); + if (!q->is_mmapped) { + printk(KERN_ERR "Error: mmap_mapper() never called!\n"); + return -EINVAL; + } return CALL(q, iolock, q, vb, fbuf); } @@ -300,7 +302,11 @@ static int __videobuf_mmap_free(struct videobuf_queue *q) MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS); + rc = CALL(q, mmap_free, q); + + q->is_mmapped = 0; + if (rc < 0) return rc; @@ -1022,6 +1028,7 @@ int videobuf_mmap_mapper(struct videobuf_queue *q, mutex_lock(&q->lock); retval = CALL(q, mmap_mapper, q, vma); + q->is_mmapped = 1; mutex_unlock(&q->lock); return retval; diff --git a/include/media/videobuf-core.h b/include/media/videobuf-core.h index 7aa7a7b64c1b..97f14d469595 100644 --- a/include/media/videobuf-core.h +++ b/include/media/videobuf-core.h @@ -164,6 +164,8 @@ struct videobuf_queue { unsigned int streaming:1; unsigned int reading:1; + unsigned int is_mmapped:1; + /* capture via mmap() + ioctl(QBUF/DQBUF) */ struct list_head stream; -- cgit v1.2.3-59-g8ed1b From f234081bc564c69eb0e2cd4e957ad1cbae4a6144 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 10 Jan 2008 01:22:39 -0300 Subject: V4L/DVB (7002): cx25840: Add basic CX23885 AVCore support The cx23885/7/8 PCIe bridge has an internal AVCore modelled on the cx2584x family. Many of the registers positions are identical but some moved. The register values are also different because the different bridges run at different clock rates. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx25840/cx25840-audio.c | 65 ++++++-- drivers/media/video/cx25840/cx25840-core.c | 219 ++++++++++++++++++++++--- drivers/media/video/cx25840/cx25840-core.h | 1 + drivers/media/video/cx25840/cx25840-firmware.c | 5 + include/media/cx25840.h | 19 +++ 5 files changed, 272 insertions(+), 37 deletions(-) diff --git a/drivers/media/video/cx25840/cx25840-audio.c b/drivers/media/video/cx25840/cx25840-audio.c index 51fc0af01578..d6421e1e8f6a 100644 --- a/drivers/media/video/cx25840/cx25840-audio.c +++ b/drivers/media/video/cx25840/cx25840-audio.c @@ -32,11 +32,17 @@ static int set_audclk_freq(struct i2c_client *client, u32 freq) /* common for all inputs and rates */ /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x10 */ - cx25840_write(client, 0x127, 0x50); + if (!state->is_cx23885) + cx25840_write(client, 0x127, 0x50); if (state->aud_input != CX25840_AUDIO_SERIAL) { switch (freq) { case 32000: + if (state->is_cx23885) { + /* We don't have register values + * so avoid destroying registers. */ + break; + } /* VID_PLL and AUX_PLL */ cx25840_write4(client, 0x108, 0x1006040f); @@ -53,6 +59,11 @@ static int set_audclk_freq(struct i2c_client *client, u32 freq) break; case 44100: + if (state->is_cx23885) { + /* We don't have register values + * so avoid destroying registers. */ + break; + } /* VID_PLL and AUX_PLL */ cx25840_write4(client, 0x108, 0x1009040f); @@ -69,6 +80,11 @@ static int set_audclk_freq(struct i2c_client *client, u32 freq) break; case 48000: + if (state->is_cx23885) { + /* We don't have register values + * so avoid destroying registers. */ + break; + } /* VID_PLL and AUX_PLL */ cx25840_write4(client, 0x108, 0x100a040f); @@ -87,6 +103,11 @@ static int set_audclk_freq(struct i2c_client *client, u32 freq) } else { switch (freq) { case 32000: + if (state->is_cx23885) { + /* We don't have register values + * so avoid destroying registers. */ + break; + } /* VID_PLL and AUX_PLL */ cx25840_write4(client, 0x108, 0x1e08040f); @@ -109,6 +130,12 @@ static int set_audclk_freq(struct i2c_client *client, u32 freq) break; case 44100: + if (state->is_cx23885) { + /* We don't have register values + * so avoid destroying registers. */ + break; + } + /* VID_PLL and AUX_PLL */ cx25840_write4(client, 0x108, 0x1809040f); @@ -128,22 +155,33 @@ static int set_audclk_freq(struct i2c_client *client, u32 freq) break; case 48000: - /* VID_PLL and AUX_PLL */ - cx25840_write4(client, 0x108, 0x180a040f); + if (!state->is_cx23885) { + /* VID_PLL and AUX_PLL */ + cx25840_write4(client, 0x108, 0x180a040f); - /* AUX_PLL_FRAC */ - cx25840_write4(client, 0x110, 0x0098d6e5); + /* AUX_PLL_FRAC */ + cx25840_write4(client, 0x110, 0x0098d6e5); + } if (state->is_cx25836) break; - /* src1_ctl = 0x08010000 */ - cx25840_write4(client, 0x8f8, 0x08018000); + if (!state->is_cx23885) { + /* src1_ctl */ + cx25840_write4(client, 0x8f8, 0x08018000); - /* src3/4/6_ctl = 0x08020000 */ - cx25840_write4(client, 0x900, 0x08015555); - cx25840_write4(client, 0x904, 0x08015555); - cx25840_write4(client, 0x90c, 0x08015555); + /* src3/4/6_ctl */ + cx25840_write4(client, 0x900, 0x08015555); + cx25840_write4(client, 0x904, 0x08015555); + cx25840_write4(client, 0x90c, 0x08015555); + } else { + + cx25840_write4(client, 0x8f8, 0x0801867c); + + cx25840_write4(client, 0x900, 0x08014faa); + cx25840_write4(client, 0x904, 0x08014faa); + cx25840_write4(client, 0x90c, 0x08014faa); + } break; } } @@ -188,6 +226,11 @@ void cx25840_audio_set_path(struct i2c_client *client) /* deassert soft reset */ cx25840_and_or(client, 0x810, ~0x1, 0x00); + + if (state->is_cx23885) { + /* Ensure the controller is running when we exit */ + cx25840_and_or(client, 0x803, ~0x10, 0x10); + } } static int get_volume(struct i2c_client *client) diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index 0d3d24aff504..756a1eeb274e 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -13,6 +13,8 @@ * NTSC sliced VBI support by Christopher Neufeld * with additional fixes by Hans Verkuil . * + * CX23885 support by Steven Toth . + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 @@ -255,6 +257,96 @@ static void cx25840_initialize(struct i2c_client *client) cx25840_and_or(client, 0x803, ~0x10, 0x10); } +static void cx23885_initialize(struct i2c_client *client) +{ + DEFINE_WAIT(wait); + struct cx25840_state *state = i2c_get_clientdata(client); + struct workqueue_struct *q; + + /* Internal Reset */ + cx25840_and_or(client, 0x102, ~0x01, 0x01); + cx25840_and_or(client, 0x102, ~0x01, 0x00); + + /* Stop microcontroller */ + cx25840_and_or(client, 0x803, ~0x10, 0x00); + + /* DIF in reset? */ + cx25840_write(client, 0x398, 0); + + /* Trust the default xtal, no division */ + /* This changes for the cx23888 products */ + cx25840_write(client, 0x2, 0x76); + + /* Bring down the regulator for AUX clk */ + cx25840_write(client, 0x1, 0x40); + + /* Sys PLL frac */ + cx25840_write4(client, 0x11c, 0x01d1744c); + + /* Sys PLL int */ + cx25840_write4(client, 0x118, 0x00000416); + + /* Disable DIF bypass */ + cx25840_write4(client, 0x33c, 0x00000001); + + /* DIF Src phase inc */ + cx25840_write4(client, 0x340, 0x0df7df83); + + /* Vid PLL frac */ + cx25840_write4(client, 0x10c, 0x01b6db7b); + + /* Vid PLL int */ + cx25840_write4(client, 0x108, 0x00000512); + + /* Luma */ + cx25840_write4(client, 0x414, 0x00107d12); + + /* Chroma */ + cx25840_write4(client, 0x420, 0x3d008282); + + /* Aux PLL frac */ + cx25840_write4(client, 0x114, 0x017dbf48); + + /* Aux PLL int */ + cx25840_write4(client, 0x110, 0x000a030e); + + /* ADC2 input select */ + cx25840_write(client, 0x102, 0x10); + + /* VIN1 & VIN5 */ + cx25840_write(client, 0x103, 0x11); + + /* Enable format auto detect */ + cx25840_write(client, 0x400, 0); + /* Fast subchroma lock */ + /* White crush, Chroma AGC & Chroma Killer enabled */ + cx25840_write(client, 0x401, 0xe8); + + /* Select AFE clock pad output source */ + cx25840_write(client, 0x144, 0x05); + + /* Do the firmware load in a work handler to prevent. + Otherwise the kernel is blocked waiting for the + bit-banging i2c interface to finish uploading the + firmware. */ + INIT_WORK(&state->fw_work, cx25840_work_handler); + init_waitqueue_head(&state->fw_wait); + q = create_singlethread_workqueue("cx25840_fw"); + prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE); + queue_work(q, &state->fw_work); + schedule(); + finish_wait(&state->fw_wait, &wait); + destroy_workqueue(q); + + cx25840_vbi_setup(client); + + /* (re)set input */ + set_input(client, state->vid_input, state->aud_input); + + /* start microcontroller */ + cx25840_and_or(client, 0x803, ~0x10, 0x10); +} + /* ----------------------------------------------------------------------- */ static void input_change(struct i2c_client *client) @@ -318,9 +410,22 @@ static int set_input(struct i2c_client *client, enum cx25840_video_input vid_inp vid_input <= CX25840_COMPOSITE8); u8 reg; - v4l_dbg(1, cx25840_debug, client, "decoder set video input %d, audio input %d\n", - vid_input, aud_input); + v4l_dbg(1, cx25840_debug, client, + "decoder set video input %d, audio input %d\n", + vid_input, aud_input); + if (vid_input >= CX25840_VIN1_CH1) { + v4l_dbg(1, cx25840_debug, client, "vid_input 0x%x\n", + vid_input); + reg = vid_input & 0xff; + if ((vid_input & CX25840_SVIDEO_ON) == CX25840_SVIDEO_ON) + is_composite = 0; + else + is_composite = 1; + + v4l_dbg(1, cx25840_debug, client, "mux cfg 0x%x comp=%d\n", + reg, is_composite); + } else if (is_composite) { reg = 0xf0 + (vid_input - CX25840_COMPOSITE1); } else { @@ -330,7 +435,8 @@ static int set_input(struct i2c_client *client, enum cx25840_video_input vid_inp if ((vid_input & ~0xff0) || luma < CX25840_SVIDEO_LUMA1 || luma > CX25840_SVIDEO_LUMA4 || chroma < CX25840_SVIDEO_CHROMA4 || chroma > CX25840_SVIDEO_CHROMA8) { - v4l_err(client, "0x%04x is not a valid video input!\n", vid_input); + v4l_err(client, "0x%04x is not a valid video input!\n", + vid_input); return -EINVAL; } reg = 0xf0 + ((luma - CX25840_SVIDEO_LUMA1) >> 4); @@ -343,31 +449,49 @@ static int set_input(struct i2c_client *client, enum cx25840_video_input vid_inp } } - switch (aud_input) { - case CX25840_AUDIO_SERIAL: - /* do nothing, use serial audio input */ - break; - case CX25840_AUDIO4: reg &= ~0x30; break; - case CX25840_AUDIO5: reg &= ~0x30; reg |= 0x10; break; - case CX25840_AUDIO6: reg &= ~0x30; reg |= 0x20; break; - case CX25840_AUDIO7: reg &= ~0xc0; break; - case CX25840_AUDIO8: reg &= ~0xc0; reg |= 0x40; break; + /* The caller has previously prepared the correct routing + * configuration in reg (for the cx23885) so we have no + * need to attempt to flip bits for earlier av decoders. + */ + if (!state->is_cx23885) { + switch (aud_input) { + case CX25840_AUDIO_SERIAL: + /* do nothing, use serial audio input */ + break; + case CX25840_AUDIO4: reg &= ~0x30; break; + case CX25840_AUDIO5: reg &= ~0x30; reg |= 0x10; break; + case CX25840_AUDIO6: reg &= ~0x30; reg |= 0x20; break; + case CX25840_AUDIO7: reg &= ~0xc0; break; + case CX25840_AUDIO8: reg &= ~0xc0; reg |= 0x40; break; - default: - v4l_err(client, "0x%04x is not a valid audio input!\n", aud_input); - return -EINVAL; + default: + v4l_err(client, "0x%04x is not a valid audio input!\n", + aud_input); + return -EINVAL; + } } cx25840_write(client, 0x103, reg); + /* Set INPUT_MODE to Composite (0) or S-Video (1) */ cx25840_and_or(client, 0x401, ~0x6, is_composite ? 0 : 0x02); - /* Set CH_SEL_ADC2 to 1 if input comes from CH3 */ - cx25840_and_or(client, 0x102, ~0x2, (reg & 0x80) == 0 ? 2 : 0); - /* Set DUAL_MODE_ADC2 to 1 if input comes from both CH2 and CH3 */ - if ((reg & 0xc0) != 0xc0 && (reg & 0x30) != 0x30) - cx25840_and_or(client, 0x102, ~0x4, 4); - else - cx25840_and_or(client, 0x102, ~0x4, 0); + + if (!state->is_cx23885) { + /* Set CH_SEL_ADC2 to 1 if input comes from CH3 */ + cx25840_and_or(client, 0x102, ~0x2, (reg & 0x80) == 0 ? 2 : 0); + /* Set DUAL_MODE_ADC2 to 1 if input comes from both CH2&CH3 */ + if ((reg & 0xc0) != 0xc0 && (reg & 0x30) != 0x30) + cx25840_and_or(client, 0x102, ~0x4, 4); + else + cx25840_and_or(client, 0x102, ~0x4, 0); + } else { + if (is_composite) + /* ADC2 input select channel 2 */ + cx25840_and_or(client, 0x102, ~0x2, 0); + else + /* ADC2 input select channel 3 */ + cx25840_and_or(client, 0x102, ~0x2, 2); + } state->vid_input = vid_input; state->aud_input = aud_input; @@ -375,6 +499,25 @@ static int set_input(struct i2c_client *client, enum cx25840_video_input vid_inp cx25840_audio_set_path(client); input_change(client); } + + if (state->is_cx23885) { + /* Audio channel 1 src : Parallel 1 */ + cx25840_write(client, 0x124, 0x03); + + /* Select AFE clock pad output source */ + cx25840_write(client, 0x144, 0x05); + + /* I2S_IN_CTL: I2S_IN_SONY_MODE, LEFT SAMPLE on WS=1 */ + cx25840_write(client, 0x914, 0xa0); + + /* I2S_OUT_CTL: + * I2S_IN_SONY_MODE, LEFT SAMPLE on WS=1 + * I2S_OUT_MASTER_MODE = Master + */ + cx25840_write(client, 0x918, 0xa0); + cx25840_write(client, 0x919, 0x01); + } + return 0; } @@ -853,6 +996,8 @@ static int cx25840_command(struct i2c_client *client, unsigned int cmd, state->is_initialized = 1; if (state->is_cx25836) cx25836_initialize(client); + else if (state->is_cx23885) + cx23885_initialize(client); else cx25840_initialize(client); } @@ -870,6 +1015,7 @@ static int cx25840_command(struct i2c_client *client, unsigned int cmd, return -EINVAL; if (!capable(CAP_SYS_ADMIN)) return -EPERM; + if (cmd == VIDIOC_DBG_G_REGISTER) reg->val = cx25840_read(client, reg->reg & 0x0fff); else @@ -886,14 +1032,26 @@ static int cx25840_command(struct i2c_client *client, unsigned int cmd, case VIDIOC_STREAMON: v4l_dbg(1, cx25840_debug, client, "enable output\n"); - cx25840_write(client, 0x115, state->is_cx25836 ? 0x0c : 0x8c); - cx25840_write(client, 0x116, state->is_cx25836 ? 0x04 : 0x07); + if (state->is_cx23885) { + u8 v = (cx25840_read(client, 0x421) | 0x0b); + cx25840_write(client, 0x421, v); + } else { + cx25840_write(client, 0x115, + state->is_cx25836 ? 0x0c : 0x8c); + cx25840_write(client, 0x116, + state->is_cx25836 ? 0x04 : 0x07); + } break; case VIDIOC_STREAMOFF: v4l_dbg(1, cx25840_debug, client, "disable output\n"); - cx25840_write(client, 0x115, 0x00); - cx25840_write(client, 0x116, 0x00); + if (state->is_cx23885) { + u8 v = cx25840_read(client, 0x421) & ~(0x0b); + cx25840_write(client, 0x421, v); + } else { + cx25840_write(client, 0x115, 0x00); + cx25840_write(client, 0x116, 0x00); + } break; case VIDIOC_LOG_STATUS: @@ -1056,6 +1214,8 @@ static int cx25840_command(struct i2c_client *client, unsigned int cmd, case VIDIOC_INT_RESET: if (state->is_cx25836) cx25836_initialize(client); + else if (state->is_cx23885) + cx23885_initialize(client); else cx25840_initialize(client); break; @@ -1086,6 +1246,7 @@ static int cx25840_probe(struct i2c_client *client) device_id = cx25840_read(client, 0x101) << 8; device_id |= cx25840_read(client, 0x100); + v4l_dbg(1, cx25840_debug, client, "device_id = 0x%04x\n", device_id); /* The high byte of the device ID should be * 0x83 for the cx2583x and 0x84 for the cx2584x */ @@ -1094,6 +1255,10 @@ static int cx25840_probe(struct i2c_client *client) } else if ((device_id & 0xff00) == 0x8400) { id = V4L2_IDENT_CX25840 + ((device_id >> 4) & 0xf); + } else if (device_id == 0x0000) { + id = V4L2_IDENT_CX25836 + ((device_id >> 4) & 0xf) - 6; + } else if (device_id == 0x1313) { + id = V4L2_IDENT_CX25836 + ((device_id >> 4) & 0xf) - 6; } else { v4l_dbg(1, cx25840_debug, client, "cx25840 not found\n"); @@ -1115,6 +1280,7 @@ static int cx25840_probe(struct i2c_client *client) i2c_set_clientdata(client, state); state->c = client; state->is_cx25836 = ((device_id & 0xff00) == 0x8300); + state->is_cx23885 = (device_id == 0x0000) || (device_id == 0x1313); state->vid_input = CX25840_COMPOSITE7; state->aud_input = CX25840_AUDIO8; state->audclk_freq = 48000; @@ -1124,6 +1290,7 @@ static int cx25840_probe(struct i2c_client *client) state->vbi_line_offset = 8; state->id = id; state->rev = device_id; + return 0; } diff --git a/drivers/media/video/cx25840/cx25840-core.h b/drivers/media/video/cx25840/cx25840-core.h index ea669b1f084d..95093edc9186 100644 --- a/drivers/media/video/cx25840/cx25840-core.h +++ b/drivers/media/video/cx25840/cx25840-core.h @@ -47,6 +47,7 @@ struct cx25840_state { u32 id; u32 rev; int is_cx25836; + int is_cx23885; int is_initialized; wait_queue_head_t fw_wait; /* wake up when the fw load is finished */ struct work_struct fw_work; /* work entry for fw load */ diff --git a/drivers/media/video/cx25840/cx25840-firmware.c b/drivers/media/video/cx25840/cx25840-firmware.c index e852024a5ea3..1ddf724a2c74 100644 --- a/drivers/media/video/cx25840/cx25840-firmware.c +++ b/drivers/media/video/cx25840/cx25840-firmware.c @@ -24,6 +24,7 @@ #include "cx25840-core.h" #define FWFILE "v4l-cx25840.fw" +#define FWFILE_CX23885 "v4l-cx23885-avcore-01.fw" /* * Mike Isely - The FWSEND parameter controls the @@ -92,10 +93,14 @@ static int fw_write(struct i2c_client *client, u8 * data, int size) int cx25840_loadfw(struct i2c_client *client) { + struct cx25840_state *state = i2c_get_clientdata(client); const struct firmware *fw = NULL; u8 buffer[4], *ptr; int size, send, retval; + if (state->is_cx23885) + firmware = FWFILE_CX23885; + if (request_firmware(&fw, firmware, FWDEV(client)) != 0) { v4l_err(client, "unable to open firmware %s\n", firmware); return -EINVAL; diff --git a/include/media/cx25840.h b/include/media/cx25840.h index 8e7e52d659a0..cd599ad29fb2 100644 --- a/include/media/cx25840.h +++ b/include/media/cx25840.h @@ -49,6 +49,25 @@ enum cx25840_video_input { CX25840_SVIDEO2 = 0x620, CX25840_SVIDEO3 = 0x730, CX25840_SVIDEO4 = 0x840, + + /* Allow frames to specify specific input configurations */ + CX25840_VIN1_CH1 = 0x80000000, + CX25840_VIN2_CH1 = 0x80000001, + CX25840_VIN3_CH1 = 0x80000002, + CX25840_VIN4_CH1 = 0x80000003, + CX25840_VIN5_CH1 = 0x80000004, + CX25840_VIN6_CH1 = 0x80000005, + CX25840_VIN7_CH1 = 0x80000006, + CX25840_VIN8_CH1 = 0x80000007, + CX25840_VIN4_CH2 = 0x80000000, + CX25840_VIN5_CH2 = 0x80000010, + CX25840_VIN6_CH2 = 0x80000020, + CX25840_NONE_CH2 = 0x80000030, + CX25840_VIN7_CH3 = 0x80000000, + CX25840_VIN8_CH3 = 0x80000040, + CX25840_NONE0_CH3 = 0x80000080, + CX25840_NONE1_CH3 = 0x800000c0, + CX25840_SVIDEO_ON = 0x80000100, }; enum cx25840_audio_input { -- cgit v1.2.3-59-g8ed1b From 0ac5881aefc2dab8b3535c2e44fee6628acaf787 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 10 Jan 2008 02:06:35 -0300 Subject: V4L/DVB (7003): cx23885: Add support for device revision detection Each version of the cx23885/7/8 silicon has different build revs. We'll use this internal revision to work around bugs and known issues in the video and encoder related patches. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/cx23885-core.c | 40 ++++++++++++++++++++++++++++++ drivers/media/video/cx23885/cx23885-reg.h | 1 + drivers/media/video/cx23885/cx23885.h | 1 + 3 files changed, 42 insertions(+) diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c index f205ad6354e7..a602ac800a4f 100644 --- a/drivers/media/video/cx23885/cx23885-core.c +++ b/drivers/media/video/cx23885/cx23885-core.c @@ -702,6 +702,44 @@ static int cx23885_init_tsport(struct cx23885_dev *dev, struct cx23885_tsport *p return 0; } +static void cx23885_dev_checkrevision(struct cx23885_dev *dev) +{ + switch (cx_read(RDR_CFG2) & 0xff) { + case 0x00: + /* cx23885 */ + dev->hwrevision = 0xa0; + break; + case 0x01: + /* CX23885-12Z */ + dev->hwrevision = 0xa1; + break; + case 0x02: + /* CX23885-13Z */ + dev->hwrevision = 0xb0; + break; + case 0x03: + /* CX23888-22Z */ + dev->hwrevision = 0xc0; + break; + case 0x0e: + /* CX23887-15Z */ + dev->hwrevision = 0xc0; + case 0x0f: + /* CX23887-14Z */ + dev->hwrevision = 0xb1; + break; + default: + printk(KERN_ERR "%s() New hardware revision found 0x%x\n", + __FUNCTION__, dev->hwrevision); + } + if (dev->hwrevision) + printk(KERN_INFO "%s() Hardware revision = 0x%02x\n", + __FUNCTION__, dev->hwrevision); + else + printk(KERN_ERR "%s() Hardware revision unknown 0x%x\n", + __FUNCTION__, dev->hwrevision); +} + static int cx23885_dev_setup(struct cx23885_dev *dev) { int i; @@ -832,6 +870,8 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) } } + cx23885_dev_checkrevision(dev); + return 0; } diff --git a/drivers/media/video/cx23885/cx23885-reg.h b/drivers/media/video/cx23885/cx23885-reg.h index 162169f9091b..38abf49b63a1 100644 --- a/drivers/media/video/cx23885/cx23885-reg.h +++ b/drivers/media/video/cx23885/cx23885-reg.h @@ -276,6 +276,7 @@ Channel manager Data Structure entry = 20 DWORD #define RDR_CFG0 0x00050000 #define RDR_CFG1 0x00050004 +#define RDR_CFG2 0x00050008 #define RDR_TLCTL0 0x00050318 /* APB DMAC Current Buffer Pointer */ diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index 974ec14782d7..48d0c87ddbc2 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -191,6 +191,7 @@ struct cx23885_dev { u32 __iomem *lmmio; u8 __iomem *bmmio; int pci_irqmask; + int hwrevision; /* I2C adapters: Master 1 & 2 (External) & Master 3 (Internal only) */ struct cx23885_i2c i2c_bus[3]; -- cgit v1.2.3-59-g8ed1b From 5206d6ec36e2c66090c3c02c95b8d70c356a9ad3 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 10 Jan 2008 02:09:27 -0300 Subject: V4L/DVB (7004): cx23885: Ensure HVR1800 TDA8295A is reset fully on module load Failure to do this means that a full system reboot is required if the part hangs. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/cx23885-cards.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index aa0ddf2ea224..901bebcca7c3 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -268,7 +268,13 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) /* GPIO-15-18 cx23417 READY, CS, RD, WR */ /* GPIO-19 IR_RX */ - cx_set(GP0_IO, 0x00040004); /* Bring the tuner out of reset */ + /* Force the TDA8295A into reset and back */ + cx_set(GP0_IO, 0x00040004); + mdelay(20); + cx_clear(GP0_IO, 0x00000004); + mdelay(20); + cx_set(GP0_IO, 0x00040004); + mdelay(20); break; } } -- cgit v1.2.3-59-g8ed1b From 69ad6e56bade948793957a295b3bf1376cffdf65 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 10 Jan 2008 02:16:41 -0300 Subject: V4L/DVB (7005): cx23885: SRAM reallocation prior to analog video implementation We need to clear space large enough for the video and encoder fifos. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/cx23885-core.c | 40 +++++++++++++++--------------- 1 file changed, 20 insertions(+), 20 deletions(-) diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c index a602ac800a4f..31723dd7cbdc 100644 --- a/drivers/media/video/cx23885/cx23885-core.c +++ b/drivers/media/video/cx23885/cx23885-core.c @@ -75,12 +75,12 @@ static LIST_HEAD(cx23885_devlist); static struct sram_channel cx23885_sram_channels[] = { [SRAM_CH01] = { - .name = "test ch1", + .name = "VID A", .cmds_start = 0x10000, - .ctrl_start = 0x10500, - .cdt = 0x10900, - .fifo_start = 0x3000, - .fifo_size = 0x1000, + .ctrl_start = 0x105b0, + .cdt = 0x107b0, + .fifo_start = 0x40, + .fifo_size = 0x2800, .ptr1_reg = DMA1_PTR1, .ptr2_reg = DMA1_PTR2, .cnt1_reg = DMA1_CNT1, @@ -102,8 +102,8 @@ static struct sram_channel cx23885_sram_channels[] = { [SRAM_CH03] = { .name = "TS1 B", .cmds_start = 0x100A0, - .ctrl_start = 0x10780, - .cdt = 0x10400, + .ctrl_start = 0x10630, + .cdt = 0x10870, .fifo_start = 0x5000, .fifo_size = 0x1000, .ptr1_reg = DMA3_PTR1, @@ -139,7 +139,7 @@ static struct sram_channel cx23885_sram_channels[] = { .name = "TS2 C", .cmds_start = 0x10140, .ctrl_start = 0x10680, - .cdt = 0x10480, + .cdt = 0x108d0, .fifo_start = 0x6000, .fifo_size = 0x1000, .ptr1_reg = DMA5_PTR1, @@ -207,12 +207,12 @@ static struct sram_channel cx23885_sram_channels[] = { static struct sram_channel cx23887_sram_channels[] = { [SRAM_CH01] = { - .name = "test ch1", - .cmds_start = 0x0, - .ctrl_start = 0x0, - .cdt = 0x0, - .fifo_start = 0x0, - .fifo_size = 0x0, + .name = "VID A", + .cmds_start = 0x10000, + .ctrl_start = 0x105b0, + .cdt = 0x107b0, + .fifo_start = 0x40, + .fifo_size = 0x2800, .ptr1_reg = DMA1_PTR1, .ptr2_reg = DMA1_PTR2, .cnt1_reg = DMA1_CNT1, @@ -231,12 +231,12 @@ static struct sram_channel cx23887_sram_channels[] = { .cnt2_reg = DMA2_CNT2, }, [SRAM_CH03] = { - .name = "ch3", - .cmds_start = 0x0, - .ctrl_start = 0x0, - .cdt = 0x0, - .fifo_start = 0x0, - .fifo_size = 0x0, + .name = "TS1 B", + .cmds_start = 0x100A0, + .ctrl_start = 0x10780, + .cdt = 0x10400, + .fifo_start = 0x5000, + .fifo_size = 0x1000, .ptr1_reg = DMA3_PTR1, .ptr2_reg = DMA3_PTR2, .cnt1_reg = DMA3_CNT1, -- cgit v1.2.3-59-g8ed1b From c771261330c90b7c77f686a1aa0fb4f756e07b5f Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 10 Jan 2008 02:24:27 -0300 Subject: V4L/DVB (7006): cx23885: Track the board clock frequency and allow overrides The cx23885/6/8 all have different clock rates, this patch allows the core to compensate, and developers to allow vendor specific overrides. This patches will be used by future analog video and encoder patches. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/cx23885-cards.c | 2 ++ drivers/media/video/cx23885/cx23885-core.c | 8 ++++++++ drivers/media/video/cx23885/cx23885.h | 15 +++++++++++++++ 3 files changed, 25 insertions(+) diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 901bebcca7c3..a4bac43cf9f5 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -32,6 +32,8 @@ struct cx23885_board cx23885_boards[] = { [CX23885_BOARD_UNKNOWN] = { .name = "UNKNOWN/GENERIC", + /* Ensure safe default for unknown boards */ + .clk_freq = 0, .input = {{ .type = CX23885_VMUX_COMPOSITE1, .vmux = 0, diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c index 31723dd7cbdc..8616a26895d8 100644 --- a/drivers/media/video/cx23885/cx23885-core.c +++ b/drivers/media/video/cx23885/cx23885-core.c @@ -759,10 +759,14 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) if(dev->pci->device == 0x8880) { dev->bridge = CX23885_BRIDGE_887; dev->sram_channels = cx23887_sram_channels; + /* Apply a sensible clock frequency for the PCIe bridge */ + dev->clk_freq = 25000000; } else if(dev->pci->device == 0x8852) { dev->bridge = CX23885_BRIDGE_885; dev->sram_channels = cx23885_sram_channels; + /* Apply a sensible clock frequency for the PCIe bridge */ + dev->clk_freq = 28000000; } else BUG(); @@ -782,6 +786,10 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) cx23885_card_list(dev); } + /* If the user specific a clk freq override, apply it */ + if (cx23885_boards[dev->board].clk_freq > 0) + dev->clk_freq = cx23885_boards[dev->board].clk_freq; + dev->pci_bus = dev->pci->bus->number; dev->pci_slot = PCI_SLOT(dev->pci->devfn); dev->pci_irqmask = 0x001f00; diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index 48d0c87ddbc2..b957242dcd5e 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -100,6 +100,17 @@ typedef enum { struct cx23885_board { char *name; port_t portb, portc; + + /* Vendors can and do run the PCIe bridge at different + * clock rates, driven physically by crystals on the PCBs. + * The core has to accomodate this. This allows the user + * to add new boards with new frequencys. The value is + * expressed in Hz. + * + * The core framework will default this value based on + * current designs, but it can vary. + */ + u32 clk_freq; struct cx23885_input input[MAX_CX23885_INPUT]; }; @@ -193,6 +204,10 @@ struct cx23885_dev { int pci_irqmask; int hwrevision; + /* This valud is board specific and is used to configure the + * AV core so we see nice clean and stable video and audio. */ + u32 clk_freq; + /* I2C adapters: Master 1 & 2 (External) & Master 3 (Internal only) */ struct cx23885_i2c i2c_bus[3]; -- cgit v1.2.3-59-g8ed1b From 7b8880140ff6aec6a5bec7929b03ce0b96a7c79a Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 10 Jan 2008 03:40:49 -0300 Subject: V4L/DVB (7007): cx23885: Add basic video support for the HVR1800 This enabled basic preview NTSC and PAL support for the HVR1800. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/Makefile | 2 +- drivers/media/video/cx23885/cx23885-cards.c | 27 ++-- drivers/media/video/cx23885/cx23885-core.c | 185 ++++++++++++++++++++++++---- drivers/media/video/cx23885/cx23885-i2c.c | 31 ++++- drivers/media/video/cx23885/cx23885-reg.h | 12 ++ drivers/media/video/cx23885/cx23885.h | 151 ++++++++++++++++++++++- 6 files changed, 366 insertions(+), 42 deletions(-) diff --git a/drivers/media/video/cx23885/Makefile b/drivers/media/video/cx23885/Makefile index 665067022d2a..32c90be50602 100644 --- a/drivers/media/video/cx23885/Makefile +++ b/drivers/media/video/cx23885/Makefile @@ -1,4 +1,4 @@ -cx23885-objs := cx23885-cards.o cx23885-core.o cx23885-i2c.o cx23885-dvb.o +cx23885-objs := cx23885-cards.o cx23885-video.o cx23885-vbi.o cx23885-core.o cx23885-i2c.o cx23885-dvb.o obj-$(CONFIG_VIDEO_CX23885) += cx23885.o diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index a4bac43cf9f5..c2d5a4d7228b 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -23,6 +23,7 @@ #include #include #include +#include #include "cx23885.h" @@ -71,23 +72,29 @@ struct cx23885_board cx23885_boards[] = { }, [CX23885_BOARD_HAUPPAUGE_HVR1800] = { .name = "Hauppauge WinTV-HVR1800", + .porta = CX23885_ANALOG_VIDEO, .portc = CX23885_MPEG_DVB, + .tuner_type = TUNER_PHILIPS_TDA8290, + .tuner_addr = 0x42, /* 0x84 >> 1 */ .input = {{ .type = CX23885_VMUX_TELEVISION, - .vmux = 0, - .gpio0 = 0xff00, - },{ - .type = CX23885_VMUX_DEBUG, - .vmux = 0, - .gpio0 = 0xff01, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN5_CH2 | + CX25840_VIN2_CH1, + .gpio0 = 0, },{ .type = CX23885_VMUX_COMPOSITE1, - .vmux = 1, - .gpio0 = 0xff02, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN6_CH1, + .gpio0 = 0, },{ .type = CX23885_VMUX_SVIDEO, - .vmux = 2, - .gpio0 = 0xff02, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN8_CH1 | + CX25840_SVIDEO_ON, + .gpio0 = 0, }}, }, [CX23885_BOARD_HAUPPAUGE_HVR1250] = { diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c index 8616a26895d8..e1b06d79e9b1 100644 --- a/drivers/media/video/cx23885/cx23885-core.c +++ b/drivers/media/video/cx23885/cx23885-core.c @@ -50,7 +50,7 @@ MODULE_PARM_DESC(card,"card type"); static unsigned int cx23885_devcount; static DEFINE_MUTEX(devlist); -static LIST_HEAD(cx23885_devlist); +LIST_HEAD(cx23885_devlist); #define NO_SYNC_LINE (-1U) @@ -356,7 +356,7 @@ static int cx23885_risc_decode(u32 risc) return incr[risc >> 28] ? incr[risc >> 28] : 1; } -static void cx23885_wakeup(struct cx23885_tsport *port, +void cx23885_wakeup(struct cx23885_tsport *port, struct cx23885_dmaqueue *q, u32 count) { struct cx23885_dev *dev = port->dev; @@ -392,7 +392,7 @@ static void cx23885_wakeup(struct cx23885_tsport *port, __FUNCTION__, bc); } -static int cx23885_sram_channel_setup(struct cx23885_dev *dev, +int cx23885_sram_channel_setup(struct cx23885_dev *dev, struct sram_channel *ch, unsigned int bpl, u32 risc) { @@ -465,7 +465,7 @@ static int cx23885_sram_channel_setup(struct cx23885_dev *dev, return 0; } -static void cx23885_sram_channel_dump(struct cx23885_dev *dev, +void cx23885_sram_channel_dump(struct cx23885_dev *dev, struct sram_channel *ch) { static char *name[] = { @@ -592,15 +592,18 @@ static void cx23885_reset(struct cx23885_dev *dev) mdelay(100); - cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH01 ], 188*4, 0); - cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH02 ], 128, 0); - cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH03 ], 188*4, 0); - cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH04 ], 128, 0); - cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH05 ], 128, 0); - cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH06 ], 188*4, 0); - cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH07 ], 128, 0); - cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH08 ], 128, 0); - cx23885_sram_channel_setup(dev, &dev->sram_channels[ SRAM_CH09 ], 128, 0); + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH01], + 720*4, 0); + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH02], 128, 0); + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH03], + 188*4, 0); + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH04], 128, 0); + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH05], 128, 0); + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH06], + 188*4, 0); + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH07], 128, 0); + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH08], 128, 0); + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH09], 128, 0); cx23885_gpio_setup(dev); } @@ -634,7 +637,7 @@ static int get_resources(struct cx23885_dev *dev) } static void cx23885_timeout(unsigned long data); -static int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, +int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, u32 reg, u32 mask, u32 value); static int cx23885_init_tsport(struct cx23885_dev *dev, struct cx23885_tsport *port, int portno) @@ -854,6 +857,17 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) cx23885_pci_quirks(dev); + /* Assume some sensible defaults */ + dev->tuner_type = cx23885_boards[dev->board].tuner_type; + dev->tuner_addr = cx23885_boards[dev->board].tuner_addr; + dev->radio_type = cx23885_boards[dev->board].radio_type; + dev->radio_addr = cx23885_boards[dev->board].radio_addr; + + dprintk(1, "%s() tuner_type = 0x%x tuner_addr = 0x%x\n", + __FUNCTION__, dev->tuner_type, dev->tuner_addr); + dprintk(1, "%s() radio_type = 0x%x radio_addr = 0x%x\n", + __FUNCTION__, dev->radio_type, dev->radio_addr); + /* init hardware */ cx23885_reset(dev); @@ -864,14 +878,21 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) cx23885_card_setup(dev); cx23885_ir_init(dev); - if(cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) { + if (cx23885_boards[dev->board].porta == CX23885_ANALOG_VIDEO) { + if (cx23885_video_register(dev) < 0) { + printk(KERN_ERR "%s() Failed to register analog " + "video adapters on VID_A\n", __FUNCTION__); + } + } + + if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) { if (cx23885_dvb_register(&dev->ts1) < 0) { printk(KERN_ERR "%s() Failed to register dvb adapters on VID_B\n", __FUNCTION__); } } - if(cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) { + if (cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) { if (cx23885_dvb_register(&dev->ts2) < 0) { printk(KERN_ERR "%s() Failed to register dvb adapters on VID_C\n", __FUNCTION__); @@ -891,6 +912,9 @@ static void cx23885_dev_unregister(struct cx23885_dev *dev) if (!atomic_dec_and_test(&dev->refcount)) return; + if (cx23885_boards[dev->board].porta == CX23885_ANALOG_VIDEO) + cx23885_video_unregister(dev); + if(cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) cx23885_dvb_unregister(&dev->ts1); @@ -958,6 +982,45 @@ static u32* cx23885_risc_field(u32 *rp, struct scatterlist *sglist, return rp; } +int cx23885_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc, + struct scatterlist *sglist, unsigned int top_offset, + unsigned int bottom_offset, unsigned int bpl, + unsigned int padding, unsigned int lines) +{ + u32 instructions, fields; + u32 *rp; + int rc; + + fields = 0; + if (UNSET != top_offset) + fields++; + if (UNSET != bottom_offset) + fields++; + + /* estimate risc mem: worst case is one write per page border + + one write per scan line + syncs + jump (all 2 dwords). Padding + can cause next bpl to start close to a page border. First DMA + region may be smaller than PAGE_SIZE */ + /* write and jump need and extra dword */ + instructions = fields * (1 + ((bpl + padding) * lines) / PAGE_SIZE + lines); + instructions += 2; + if ((rc = btcx_riscmem_alloc(pci,risc,instructions*12)) < 0) + return rc; + + /* write risc instructions */ + rp = risc->cpu; + if (UNSET != top_offset) + rp = cx23885_risc_field(rp, sglist, top_offset, 0, + bpl, padding, lines); + if (UNSET != bottom_offset) + rp = cx23885_risc_field(rp, sglist, bottom_offset, 0x200, + bpl, padding, lines); + + /* save pointer to jmp instruction address */ + risc->jmp = rp; + BUG_ON((risc->jmp - risc->cpu + 2) * sizeof (*risc->cpu) > risc->size); + return 0; +} static int cx23885_risc_databuffer(struct pci_dev *pci, struct btcx_riscmem *risc, @@ -990,7 +1053,7 @@ static int cx23885_risc_databuffer(struct pci_dev *pci, return 0; } -static int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, +int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, u32 reg, u32 mask, u32 value) { u32 *rp; @@ -1023,6 +1086,57 @@ void cx23885_free_buffer(struct videobuf_queue *q, struct cx23885_buffer *buf) buf->vb.state = VIDEOBUF_NEEDS_INIT; } +static void cx23885_tsport_reg_dump(struct cx23885_tsport *port) +{ + struct cx23885_dev *dev = port->dev; + + dprintk(1, "%s() Register Dump\n", __FUNCTION__); + dprintk(1, "%s() DEV_CNTRL2 0x%08X\n", __FUNCTION__, + cx_read(DEV_CNTRL2)); + dprintk(1, "%s() PCI_INT_MSK 0x%08X\n", __FUNCTION__, + cx_read(PCI_INT_MSK)); + dprintk(1, "%s() AUD_INT_INT_MSK 0x%08X\n", __FUNCTION__, + cx_read(AUDIO_INT_INT_MSK)); + dprintk(1, "%s() AUD_INT_DMA_CTL 0x%08X\n", __FUNCTION__, + cx_read(AUD_INT_DMA_CTL)); + dprintk(1, "%s() AUD_EXT_INT_MSK 0x%08X\n", __FUNCTION__, + cx_read(AUDIO_EXT_INT_MSK)); + dprintk(1, "%s() AUD_EXT_DMA_CTL 0x%08X\n", __FUNCTION__, + cx_read(AUD_EXT_DMA_CTL)); + dprintk(1, "%s() PAD_CTRL 0x%08X\n", __FUNCTION__, + cx_read(PAD_CTRL)); + dprintk(1, "%s() ALT_PIN_OUT_SEL 0x%08X\n", __FUNCTION__, + cx_read(ALT_PIN_OUT_SEL)); + dprintk(1, "%s() GPIO2 0x%08X\n", __FUNCTION__, + cx_read(GPIO2)); + dprintk(1, "%s() gpcnt(0x%08X) 0x%08X\n", __FUNCTION__, + port->reg_gpcnt, cx_read(port->reg_gpcnt)); + dprintk(1, "%s() gpcnt_ctl(0x%08X) 0x%08x\n", __FUNCTION__, + port->reg_gpcnt_ctl, cx_read(port->reg_gpcnt_ctl)); + dprintk(1, "%s() dma_ctl(0x%08X) 0x%08x\n", __FUNCTION__, + port->reg_dma_ctl, cx_read(port->reg_dma_ctl)); + dprintk(1, "%s() src_sel(0x%08X) 0x%08x\n", __FUNCTION__, + port->reg_src_sel, cx_read(port->reg_src_sel)); + dprintk(1, "%s() lngth(0x%08X) 0x%08x\n", __FUNCTION__, + port->reg_lngth, cx_read(port->reg_lngth)); + dprintk(1, "%s() hw_sop_ctrl(0x%08X) 0x%08x\n", __FUNCTION__, + port->reg_hw_sop_ctrl, cx_read(port->reg_hw_sop_ctrl)); + dprintk(1, "%s() gen_ctrl(0x%08X) 0x%08x\n", __FUNCTION__, + port->reg_gen_ctrl, cx_read(port->reg_gen_ctrl)); + dprintk(1, "%s() bd_pkt_status(0x%08X) 0x%08x\n", __FUNCTION__, + port->reg_bd_pkt_status, cx_read(port->reg_bd_pkt_status)); + dprintk(1, "%s() sop_status(0x%08X) 0x%08x\n", __FUNCTION__, + port->reg_sop_status, cx_read(port->reg_sop_status)); + dprintk(1, "%s() fifo_ovfl_stat(0x%08X) 0x%08x\n", __FUNCTION__, + port->reg_fifo_ovfl_stat, cx_read(port->reg_fifo_ovfl_stat)); + dprintk(1, "%s() vld_misc(0x%08X) 0x%08x\n", __FUNCTION__, + port->reg_vld_misc, cx_read(port->reg_vld_misc)); + dprintk(1, "%s() ts_clk_en(0x%08X) 0x%08x\n", __FUNCTION__, + port->reg_ts_clk_en, cx_read(port->reg_ts_clk_en)); + dprintk(1, "%s() ts_int_msk(0x%08X) 0x%08x\n", __FUNCTION__, + port->reg_ts_int_msk, cx_read(port->reg_ts_int_msk)); +} + static int cx23885_start_dma(struct cx23885_tsport *port, struct cx23885_dmaqueue *q, struct cx23885_buffer *buf) @@ -1085,6 +1199,9 @@ static int cx23885_start_dma(struct cx23885_tsport *port, cx_set(DEV_CNTRL2, (1<<5)); /* Enable RISC controller */ + if (debug > 4) + cx23885_tsport_reg_dump(port); + return 0; } @@ -1100,7 +1217,7 @@ static int cx23885_stop_dma(struct cx23885_tsport *port) return 0; } -static int cx23885_restart_queue(struct cx23885_tsport *port, +int cx23885_restart_queue(struct cx23885_tsport *port, struct cx23885_dmaqueue *q) { struct cx23885_dev *dev = port->dev; @@ -1324,12 +1441,15 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id) struct cx23885_tsport *ts1 = &dev->ts1; struct cx23885_tsport *ts2 = &dev->ts2; u32 pci_status, pci_mask; + u32 vida_status, vida_mask; u32 ts1_status, ts1_mask; u32 ts2_status, ts2_mask; - int ts1_count = 0, ts2_count = 0, handled = 0; + int vida_count = 0, ts1_count = 0, ts2_count = 0, handled = 0; pci_status = cx_read(PCI_INT_STAT); pci_mask = cx_read(PCI_INT_MSK); + vida_status = cx_read(VID_A_INT_STAT); + vida_mask = cx_read(VID_A_INT_MSK); ts1_status = cx_read(VID_B_INT_STAT); ts1_mask = cx_read(VID_B_INT_MSK); ts2_status = cx_read(VID_C_INT_STAT); @@ -1338,11 +1458,17 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id) if ( (pci_status == 0) && (ts2_status == 0) && (ts1_status == 0) ) goto out; + vida_count = cx_read(VID_A_GPCNT); ts1_count = cx_read(ts1->reg_gpcnt); ts2_count = cx_read(ts2->reg_gpcnt); - dprintk(7, "pci_status: 0x%08x pci_mask: 0x%08x\n", pci_status, pci_mask ); - dprintk(7, "ts1_status: 0x%08x ts1_mask: 0x%08x count: 0x%x\n", ts1_status, ts1_mask, ts1_count ); - dprintk(7, "ts2_status: 0x%08x ts2_mask: 0x%08x count: 0x%x\n", ts2_status, ts2_mask, ts2_count ); + dprintk(7, "pci_status: 0x%08x pci_mask: 0x%08x\n", + pci_status, pci_mask); + dprintk(7, "vida_status: 0x%08x vida_mask: 0x%08x count: 0x%x\n", + vida_status, vida_mask, vida_count); + dprintk(7, "ts1_status: 0x%08x ts1_mask: 0x%08x count: 0x%x\n", + ts1_status, ts1_mask, ts1_count); + dprintk(7, "ts2_status: 0x%08x ts2_mask: 0x%08x count: 0x%x\n", + ts2_status, ts2_mask, ts2_count); if ( (pci_status & PCI_MSK_RISC_RD) || (pci_status & PCI_MSK_RISC_WR) || @@ -1379,11 +1505,18 @@ static irqreturn_t cx23885_irq(int irq, void *dev_id) } - if (ts1_status) - handled += cx23885_irq_ts(ts1, ts1_status); + if (ts1_status) { + if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) + handled += cx23885_irq_ts(ts1, ts1_status); + } + + if (ts2_status) { + if (cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) + handled += cx23885_irq_ts(ts2, ts2_status); + } - if (ts2_status) - handled += cx23885_irq_ts(ts2, ts2_status); + if (vida_status) + handled += cx23885_video_irq(dev, vida_status); if (handled) cx_write(PCI_INT_STAT, pci_status); diff --git a/drivers/media/video/cx23885/cx23885-i2c.c b/drivers/media/video/cx23885/cx23885-i2c.c index b2ffbf04ef2c..fbc4a57a236b 100644 --- a/drivers/media/video/cx23885/cx23885-i2c.c +++ b/drivers/media/video/cx23885/cx23885-i2c.c @@ -270,7 +270,9 @@ static int i2c_xfer(struct i2c_adapter *i2c_adap, static int attach_inform(struct i2c_client *client) { - struct cx23885_dev *dev = i2c_get_adapdata(client->adapter); + struct cx23885_i2c *bus = i2c_get_adapdata(client->adapter); + struct cx23885_dev *dev = bus->dev; + struct tuner_setup tun_setup; dprintk(1, "%s i2c attach [addr=0x%x,client=%s]\n", client->driver->driver.name, client->addr, client->name); @@ -278,6 +280,31 @@ static int attach_inform(struct i2c_client *client) if (!client->driver->command) return 0; + if (dev->tuner_type != UNSET) { + + dprintk(1, "%s (tuner) i2c attach [addr=0x%x,client=%s]\n", + client->driver->driver.name, client->addr, + client->name); + + if ((dev->tuner_addr == ADDR_UNSET) || + (dev->tuner_addr == client->addr)) { + + dprintk(1, "%s (tuner || addr UNSET)\n", + client->driver->driver.name); + + dprintk(1, "%s i2c attach [addr=0x%x,client=%s]\n", + client->driver->driver.name, + client->addr, client->name); + + tun_setup.mode_mask = T_ANALOG_TV; + tun_setup.type = dev->tuner_type; + tun_setup.addr = dev->tuner_addr; + + client->driver->command(client, TUNER_SET_TYPE_ADDR, + &tun_setup); + } + } + return 0; } @@ -316,6 +343,7 @@ static struct i2c_adapter cx23885_i2c_adap_template = { .owner = THIS_MODULE, .id = I2C_HW_B_CX23885, .algo = &cx23885_i2c_algo_template, + .class = I2C_CLASS_TV_ANALOG, .client_register = attach_inform, .client_unregister = detach_inform, }; @@ -371,6 +399,7 @@ int cx23885_i2c_register(struct cx23885_i2c *bus) bus->i2c_algo.data = bus; bus->i2c_adap.algo_data = bus; + i2c_set_adapdata(&bus->i2c_adap, bus); i2c_add_adapter(&bus->i2c_adap); bus->i2c_client.adapter = &bus->i2c_adap; diff --git a/drivers/media/video/cx23885/cx23885-reg.h b/drivers/media/video/cx23885/cx23885-reg.h index 38abf49b63a1..bdd11bc513ad 100644 --- a/drivers/media/video/cx23885/cx23885-reg.h +++ b/drivers/media/video/cx23885/cx23885-reg.h @@ -233,6 +233,17 @@ Channel manager Data Structure entry = 20 DWORD #define VID_A_INT_SSTAT 0x0004002C #define VID_B_INT_MSK 0x00040030 +#define VID_B_MSK_BAD_PKT (1 << 20) +#define VID_B_MSK_VBI_OPC_ERR (1 << 17) +#define VID_B_MSK_OPC_ERR (1 << 16) +#define VID_B_MSK_VBI_SYNC (1 << 13) +#define VID_B_MSK_SYNC (1 << 12) +#define VID_B_MSK_VBI_OF (1 << 9) +#define VID_B_MSK_OF (1 << 8) +#define VID_B_MSK_VBI_RISCI2 (1 << 5) +#define VID_B_MSK_RISCI2 (1 << 4) +#define VID_B_MSK_VBI_RISCI1 (1 << 1) +#define VID_B_MSK_RISCI1 1 #define VID_B_INT_STAT 0x00040034 #define VID_B_INT_MSTAT 0x00040038 #define VID_B_INT_SSTAT 0x0004003C @@ -336,6 +347,7 @@ Channel manager Data Structure entry = 20 DWORD /* GPIO (417 Microsoftcontroller) Output Enable, Low Active */ #define MC417_OEN 0x00110024 #define MC417_CTL 0x00110028 +#define ALT_PIN_OUT_SEL 0x0011002C #define CLK_DELAY 0x00110048 #define PAD_CTRL 0x0011004C diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index b957242dcd5e..390f9335bdc9 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -44,6 +44,10 @@ /* Max number of inputs by card */ #define MAX_CX23885_INPUT 8 +#define INPUT(nr) (&cx23885_boards[dev->board].input[nr]) +#define RESOURCE_OVERLAY 1 +#define RESOURCE_VIDEO 2 +#define RESOURCE_VBI 4 #define BUFFER_TIMEOUT (HZ) /* 0.5 seconds */ @@ -56,6 +60,60 @@ #define CX23885_BOARD_HAUPPAUGE_HVR1500Q 5 #define CX23885_BOARD_HAUPPAUGE_HVR1500 6 +/* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */ +#define CX23885_NORMS (\ + V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_JP | V4L2_STD_NTSC_443 | \ + V4L2_STD_PAL_BG | V4L2_STD_PAL_DK | V4L2_STD_PAL_I | \ + V4L2_STD_PAL_M | V4L2_STD_PAL_N | V4L2_STD_PAL_Nc | \ + V4L2_STD_PAL_60 | V4L2_STD_SECAM_L | V4L2_STD_SECAM_DK) + +struct cx23885_fmt { + char *name; + u32 fourcc; /* v4l2 format id */ + int depth; + int flags; + u32 cxformat; +}; + +struct cx23885_ctrl { + struct v4l2_queryctrl v; + u32 off; + u32 reg; + u32 mask; + u32 shift; +}; + +struct cx23885_tvnorm { + char *name; + v4l2_std_id id; + u32 cxiformat; + u32 cxoformat; +}; + +struct cx23885_fh { + struct cx23885_dev *dev; + enum v4l2_buf_type type; + int radio; + u32 resources; + + /* video overlay */ + struct v4l2_window win; + struct v4l2_clip *clips; + unsigned int nclips; + + /* video capture */ + struct cx23885_fmt *fmt; + unsigned int width, height; + + /* vbi capture */ + struct videobuf_queue vidq; + struct videobuf_queue vbiq; + + /* MPEG Encoder specifics ONLY */ + struct videobuf_queue mpegq; + atomic_t v4l_reading; +}; + enum cx23885_itype { CX23885_VMUX_COMPOSITE1 = 1, CX23885_VMUX_COMPOSITE2, @@ -94,12 +152,17 @@ struct cx23885_input { typedef enum { CX23885_MPEG_UNDEFINED = 0, - CX23885_MPEG_DVB + CX23885_MPEG_DVB, + CX23885_ANALOG_VIDEO, } port_t; struct cx23885_board { char *name; - port_t portb, portc; + port_t porta, portb, portc; + unsigned int tuner_type; + unsigned int radio_type; + unsigned char tuner_addr; + unsigned char radio_addr; /* Vendors can and do run the PCIe bridge at different * clock rates, driven physically by crystals on the PCBs. @@ -228,8 +291,31 @@ struct cx23885_dev { CX23885_BRIDGE_885 = 885, CX23885_BRIDGE_887 = 887, } bridge; + + /* Analog video */ + u32 resources; + unsigned int input; + u32 tvaudio; + v4l2_std_id tvnorm; + unsigned int tuner_type; + unsigned char tuner_addr; + unsigned int radio_type; + unsigned char radio_addr; + unsigned int has_radio; + + /* V4l */ + u32 freq; + struct video_device *video_dev; + struct video_device *vbi_dev; + struct video_device *radio_dev; + + struct cx23885_dmaqueue vidq; + struct cx23885_dmaqueue vbiq; + spinlock_t slock; }; +extern struct list_head cx23885_devlist; + #define SRAM_CH01 0 /* Video A */ #define SRAM_CH02 1 /* VBI A */ #define SRAM_CH03 2 /* Video B */ @@ -273,8 +359,34 @@ struct sram_channel { #define cx_clear(reg,bit) cx_andor((reg),(bit),0) /* ----------------------------------------------------------- */ -/* cx23885-cards.c */ +/* cx23885-core.c */ + +extern int cx23885_sram_channel_setup(struct cx23885_dev *dev, + struct sram_channel *ch, + unsigned int bpl, u32 risc); + +extern void cx23885_sram_channel_dump(struct cx23885_dev *dev, + struct sram_channel *ch); +extern int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, + u32 reg, u32 mask, u32 value); + +extern int cx23885_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc, + struct scatterlist *sglist, + unsigned int top_offset, unsigned int bottom_offset, + unsigned int bpl, unsigned int padding, unsigned int lines); + +void cx23885_cancel_buffers(struct cx23885_tsport *port); + +extern int cx23885_restart_queue(struct cx23885_tsport *port, + struct cx23885_dmaqueue *q); + +extern void cx23885_wakeup(struct cx23885_tsport *port, + struct cx23885_dmaqueue *q, u32 count); + + +/* ----------------------------------------------------------- */ +/* cx23885-cards.c */ extern struct cx23885_board cx23885_boards[]; extern const unsigned int cx23885_bcount; @@ -294,19 +406,50 @@ extern int cx23885_buf_prepare(struct videobuf_queue *q, struct cx23885_tsport *port, struct cx23885_buffer *buf, enum v4l2_field field); - extern void cx23885_buf_queue(struct cx23885_tsport *port, struct cx23885_buffer *buf); extern void cx23885_free_buffer(struct videobuf_queue *q, struct cx23885_buffer *buf); /* ----------------------------------------------------------- */ +/* cx23885-video.c */ +/* Video */ +extern int cx23885_video_register(struct cx23885_dev *dev); +extern void cx23885_video_unregister(struct cx23885_dev *dev); +extern int cx23885_video_irq(struct cx23885_dev *dev, u32 status); + +/* ----------------------------------------------------------- */ +/* cx23885-vbi.c */ +extern int cx23885_vbi_fmt(struct file *file, void *priv, + struct v4l2_format *f); +extern void cx23885_vbi_timeout(unsigned long data); +extern struct videobuf_queue_ops cx23885_vbi_qops; + /* cx23885-i2c.c */ extern int cx23885_i2c_register(struct cx23885_i2c *bus); extern int cx23885_i2c_unregister(struct cx23885_i2c *bus); extern void cx23885_call_i2c_clients(struct cx23885_i2c *bus, unsigned int cmd, void *arg); +/* ----------------------------------------------------------- */ +/* tv norms */ + +static inline unsigned int norm_maxw(v4l2_std_id norm) +{ + return (norm & (V4L2_STD_MN & ~V4L2_STD_PAL_Nc)) ? 720 : 768; +} + +static inline unsigned int norm_maxh(v4l2_std_id norm) +{ + return (norm & V4L2_STD_625_50) ? 576 : 480; +} + +static inline unsigned int norm_swidth(v4l2_std_id norm) +{ + return (norm & (V4L2_STD_MN & ~V4L2_STD_PAL_Nc)) ? 754 : 922; +} + + /* * Local variables: * c-basic-offset: 8 -- cgit v1.2.3-59-g8ed1b From a57ed8a1f7381aa7e1bec6c55d5f119706f2982d Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 10 Jan 2008 03:43:11 -0300 Subject: V4L/DVB (7008): s5h1409: Ensure the silicon is initialized during attach If not it impacts on analog tuner quality. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/s5h1409.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c index d3b148ddad2b..3391777e0b2f 100644 --- a/drivers/media/dvb/frontends/s5h1409.c +++ b/drivers/media/dvb/frontends/s5h1409.c @@ -750,6 +750,7 @@ struct dvb_frontend* s5h1409_attach(const struct s5h1409_config* config, struct i2c_adapter* i2c) { struct s5h1409_state* state = NULL; + u16 reg; /* allocate memory for the internal state */ state = kmalloc(sizeof(struct s5h1409_state), GFP_KERNEL); @@ -763,7 +764,8 @@ struct dvb_frontend* s5h1409_attach(const struct s5h1409_config* config, state->if_freq = S5H1409_VSB_IF_FREQ; /* check if the demod exists */ - if (s5h1409_readreg(state, 0x04) != 0x0066) + reg = s5h1409_readreg(state, 0x04); + if ((reg != 0x0066) && (reg != 0x007f)) goto error; /* create dvb_frontend */ @@ -771,8 +773,14 @@ struct dvb_frontend* s5h1409_attach(const struct s5h1409_config* config, sizeof(struct dvb_frontend_ops)); state->frontend.demodulator_priv = state; + if (s5h1409_init(&state->frontend) != 0) { + printk(KERN_ERR "%s: Failed to initialize correctly\n", + __FUNCTION__); + goto error; + } + /* Note: Leaving the I2C gate open here. */ - s5h1409_writereg(state, 0xf3, 1); + s5h1409_i2c_gate_ctrl(&state->frontend, 1); return &state->frontend; -- cgit v1.2.3-59-g8ed1b From e47f30b140333525ea682ec672641b470da1e599 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 10 Jan 2008 04:25:59 -0300 Subject: V4L/DVB (7009): cx23885: Video and VBI related files cx23885: Video and VBI related files. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/cx23885-vbi.c | 256 +++++ drivers/media/video/cx23885/cx23885-video.c | 1658 +++++++++++++++++++++++++++ 2 files changed, 1914 insertions(+) create mode 100644 drivers/media/video/cx23885/cx23885-vbi.c create mode 100644 drivers/media/video/cx23885/cx23885-video.c diff --git a/drivers/media/video/cx23885/cx23885-vbi.c b/drivers/media/video/cx23885/cx23885-vbi.c new file mode 100644 index 000000000000..32ec9d5bdbd0 --- /dev/null +++ b/drivers/media/video/cx23885/cx23885-vbi.c @@ -0,0 +1,256 @@ +/* + * Driver for the Conexant CX23885 PCIe bridge + * + * Copyright (c) 2007 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +#include "cx23885.h" + +static unsigned int vbibufs = 4; +module_param(vbibufs, int, 0644); +MODULE_PARM_DESC(vbibufs, "number of vbi buffers, range 2-32"); + +static unsigned int vbi_debug = 0; +module_param(vbi_debug, int, 0644); +MODULE_PARM_DESC(vbi_debug, "enable debug messages [vbi]"); + +#define dprintk(level, fmt, arg...) if (vbi_debug >= level) \ + printk(KERN_DEBUG "%s: " fmt, dev->name , ## arg) + +/* ------------------------------------------------------------------ */ + +int cx23885_vbi_fmt(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + + if (dev->tvnorm & V4L2_STD_525_60) { + /* ntsc */ + f->fmt.vbi.sampling_rate = 28636363; + f->fmt.vbi.start[0] = 10; + f->fmt.vbi.start[1] = 273; + + } else if (dev->tvnorm & V4L2_STD_625_50) { + /* pal */ + f->fmt.vbi.sampling_rate = 35468950; + f->fmt.vbi.start[0] = 7 - 1; + f->fmt.vbi.start[1] = 319 - 1; + } + return 0; +} + +static int cx23885_start_vbi_dma(struct cx23885_dev *dev, + struct cx23885_dmaqueue *q, + struct cx23885_buffer *buf) +{ + /* setup fifo + format */ + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH02], + buf->vb.width, buf->risc.dma); + + /* reset counter */ + q->count = 1; + + /* enable irqs */ + cx_set(PCI_INT_MSK, cx_read(PCI_INT_MSK) | 0x01); + cx_set(VID_A_INT_MSK, 0x000022); + + /* start dma */ + cx_set(DEV_CNTRL2, (1<<5)); + cx_set(VID_A_DMA_CTL, 0x00000022); + + return 0; +} + +int cx23885_stop_vbi_dma(struct cx23885_dev *dev) +{ + /* stop dma */ + cx_clear(VID_A_DMA_CTL, 0x00000022); + + /* disable irqs */ + cx_clear(PCI_INT_MSK, 0x000001); + cx_clear(VID_A_INT_MSK, 0x00000022); + return 0; +} + +int cx23885_restart_vbi_queue(struct cx23885_dev *dev, + struct cx23885_dmaqueue *q) +{ + struct cx23885_buffer *buf; + struct list_head *item; + + if (list_empty(&q->active)) + return 0; + + buf = list_entry(q->active.next, struct cx23885_buffer, vb.queue); + dprintk(2, "restart_queue [%p/%d]: restart dma\n", + buf, buf->vb.i); + cx23885_start_vbi_dma(dev, q, buf); + list_for_each(item, &q->active) { + buf = list_entry(item, struct cx23885_buffer, vb.queue); + buf->count = q->count++; + } + mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); + return 0; +} + +void cx23885_vbi_timeout(unsigned long data) +{ + struct cx23885_dev *dev = (struct cx23885_dev *)data; + struct cx23885_dmaqueue *q = &dev->vbiq; + struct cx23885_buffer *buf; + unsigned long flags; + + cx23885_sram_channel_dump(dev, &dev->sram_channels[SRAM_CH02]); + + cx_clear(VID_A_DMA_CTL, 0x22); + + spin_lock_irqsave(&dev->slock, flags); + while (!list_empty(&q->active)) { + buf = list_entry(q->active.next, struct cx23885_buffer, + vb.queue); + list_del(&buf->vb.queue); + buf->vb.state = VIDEOBUF_ERROR; + wake_up(&buf->vb.done); + printk("%s/0: [%p/%d] timeout - dma=0x%08lx\n", dev->name, + buf, buf->vb.i, (unsigned long)buf->risc.dma); + } + cx23885_restart_vbi_queue(dev, q); + spin_unlock_irqrestore(&dev->slock, flags); +} + +/* ------------------------------------------------------------------ */ +#define VBI_LINE_LENGTH 2048 +#define VBI_LINE_COUNT 17 + +static int +vbi_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size) +{ + *size = VBI_LINE_COUNT * VBI_LINE_LENGTH * 2; + if (0 == *count) + *count = vbibufs; + if (*count < 2) + *count = 2; + if (*count > 32) + *count = 32; + return 0; +} + +static int +vbi_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct cx23885_fh *fh = q->priv_data; + struct cx23885_dev *dev = fh->dev; + struct cx23885_buffer *buf = container_of(vb, + struct cx23885_buffer, vb); + struct videobuf_dmabuf *dma = videobuf_to_dma(&buf->vb); + unsigned int size; + int rc; + + size = VBI_LINE_COUNT * VBI_LINE_LENGTH * 2; + if (0 != buf->vb.baddr && buf->vb.bsize < size) + return -EINVAL; + + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { + buf->vb.width = VBI_LINE_LENGTH; + buf->vb.height = VBI_LINE_COUNT; + buf->vb.size = size; + buf->vb.field = V4L2_FIELD_SEQ_TB; + + rc = videobuf_iolock(q, &buf->vb, NULL); + if (0 != rc) + goto fail; + cx23885_risc_buffer(dev->pci, &buf->risc, + dma->sglist, + 0, buf->vb.width * buf->vb.height, + buf->vb.width, 0, + buf->vb.height); + } + buf->vb.state = VIDEOBUF_PREPARED; + return 0; + + fail: + cx23885_free_buffer(q, buf); + return rc; +} + +static void +vbi_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) +{ + struct cx23885_buffer *buf = + container_of(vb, struct cx23885_buffer, vb); + struct cx23885_buffer *prev; + struct cx23885_fh *fh = vq->priv_data; + struct cx23885_dev *dev = fh->dev; + struct cx23885_dmaqueue *q = &dev->vbiq; + + /* add jump to stopper */ + buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC); + buf->risc.jmp[1] = cpu_to_le32(q->stopper.dma); + buf->risc.jmp[2] = cpu_to_le32(0); /* bits 63-32 */ + + if (list_empty(&q->active)) { + list_add_tail(&buf->vb.queue, &q->active); + cx23885_start_vbi_dma(dev, q, buf); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); + dprintk(2, "[%p/%d] vbi_queue - first active\n", + buf, buf->vb.i); + + } else { + prev = list_entry(q->active.prev, struct cx23885_buffer, + vb.queue); + list_add_tail(&buf->vb.queue, &q->active); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); + prev->risc.jmp[2] = cpu_to_le32(0); /* Bits 63-32 */ + dprintk(2, "[%p/%d] buffer_queue - append to active\n", + buf, buf->vb.i); + } +} + +static void vbi_release(struct videobuf_queue *q, struct videobuf_buffer *vb) +{ + struct cx23885_buffer *buf = + container_of(vb, struct cx23885_buffer, vb); + + cx23885_free_buffer(q, buf); +} + +struct videobuf_queue_ops cx23885_vbi_qops = { + .buf_setup = vbi_setup, + .buf_prepare = vbi_prepare, + .buf_queue = vbi_queue, + .buf_release = vbi_release, +}; + +/* ------------------------------------------------------------------ */ +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c new file mode 100644 index 000000000000..8eaebdb76b1e --- /dev/null +++ b/drivers/media/video/cx23885/cx23885-video.c @@ -0,0 +1,1658 @@ +/* + * Driver for the Conexant CX23885 PCIe bridge + * + * Copyright (c) 2007 Steven Toth + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cx23885.h" +#include + +#ifdef CONFIG_VIDEO_V4L1_COMPAT +/* Include V4L1 specific functions. Should be removed soon */ +#include +#endif + +MODULE_DESCRIPTION("v4l2 driver module for cx23885 based TV cards"); +MODULE_AUTHOR("Steven Toth "); +MODULE_LICENSE("GPL"); + +/* ------------------------------------------------------------------ */ + +static unsigned int video_nr[] = {[0 ... (CX23885_MAXBOARDS - 1)] = UNSET }; +static unsigned int vbi_nr[] = {[0 ... (CX23885_MAXBOARDS - 1)] = UNSET }; +static unsigned int radio_nr[] = {[0 ... (CX23885_MAXBOARDS - 1)] = UNSET }; + +module_param_array(video_nr, int, NULL, 0444); +module_param_array(vbi_nr, int, NULL, 0444); +module_param_array(radio_nr, int, NULL, 0444); + +MODULE_PARM_DESC(video_nr, "video device numbers"); +MODULE_PARM_DESC(vbi_nr, "vbi device numbers"); +MODULE_PARM_DESC(radio_nr, "radio device numbers"); + +static unsigned int video_debug = 0; +module_param(video_debug, int, 0644); +MODULE_PARM_DESC(video_debug, "enable debug messages [video]"); + +static unsigned int irq_debug = 0; +module_param(irq_debug, int, 0644); +MODULE_PARM_DESC(irq_debug, "enable debug messages [IRQ handler]"); + +static unsigned int vid_limit = 16; +module_param(vid_limit, int, 0644); +MODULE_PARM_DESC(vid_limit, "capture memory limit in megabytes"); + +#define dprintk(level, fmt, arg...)\ + if (video_debug >= level)\ + printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg) + +/* ------------------------------------------------------------------- */ +/* static data */ + +#define FORMAT_FLAGS_PACKED 0x01 + +static struct cx23885_fmt formats[] = { + { + .name = "8 bpp, gray", + .fourcc = V4L2_PIX_FMT_GREY, + .depth = 8, + .flags = FORMAT_FLAGS_PACKED, + }, { + .name = "15 bpp RGB, le", + .fourcc = V4L2_PIX_FMT_RGB555, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + }, { + .name = "15 bpp RGB, be", + .fourcc = V4L2_PIX_FMT_RGB555X, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + }, { + .name = "16 bpp RGB, le", + .fourcc = V4L2_PIX_FMT_RGB565, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + }, { + .name = "16 bpp RGB, be", + .fourcc = V4L2_PIX_FMT_RGB565X, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + }, { + .name = "24 bpp RGB, le", + .fourcc = V4L2_PIX_FMT_BGR24, + .depth = 24, + .flags = FORMAT_FLAGS_PACKED, + }, { + .name = "32 bpp RGB, le", + .fourcc = V4L2_PIX_FMT_BGR32, + .depth = 32, + .flags = FORMAT_FLAGS_PACKED, + }, { + .name = "32 bpp RGB, be", + .fourcc = V4L2_PIX_FMT_RGB32, + .depth = 32, + .flags = FORMAT_FLAGS_PACKED, + }, { + .name = "4:2:2, packed, YUYV", + .fourcc = V4L2_PIX_FMT_YUYV, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + }, { + .name = "4:2:2, packed, UYVY", + .fourcc = V4L2_PIX_FMT_UYVY, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + }, +}; + +static struct cx23885_fmt *format_by_fourcc(unsigned int fourcc) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(formats); i++) + if (formats[i].fourcc == fourcc) + return formats+i; + + printk(KERN_ERR "%s(0x%08x) NOT FOUND\n", __FUNCTION__, fourcc); + return NULL; +} + +/* ------------------------------------------------------------------- */ + +static const struct v4l2_queryctrl no_ctl = { + .name = "42", + .flags = V4L2_CTRL_FLAG_DISABLED, +}; + +static struct cx23885_ctrl cx23885_ctls[] = { + /* --- video --- */ + { + .v = { + .id = V4L2_CID_BRIGHTNESS, + .name = "Brightness", + .minimum = 0x00, + .maximum = 0xff, + .step = 1, + .default_value = 0x7f, + .type = V4L2_CTRL_TYPE_INTEGER, + }, + .off = 128, + .reg = LUMA_CTRL, + .mask = 0x00ff, + .shift = 0, + }, { + .v = { + .id = V4L2_CID_CONTRAST, + .name = "Contrast", + .minimum = 0, + .maximum = 0xff, + .step = 1, + .default_value = 0x3f, + .type = V4L2_CTRL_TYPE_INTEGER, + }, + .off = 0, + .reg = LUMA_CTRL, + .mask = 0xff00, + .shift = 8, + }, { + .v = { + .id = V4L2_CID_HUE, + .name = "Hue", + .minimum = 0, + .maximum = 0xff, + .step = 1, + .default_value = 0x7f, + .type = V4L2_CTRL_TYPE_INTEGER, + }, + .off = 128, + .reg = CHROMA_CTRL, + .mask = 0xff0000, + .shift = 16, + }, { + /* strictly, this only describes only U saturation. + * V saturation is handled specially through code. + */ + .v = { + .id = V4L2_CID_SATURATION, + .name = "Saturation", + .minimum = 0, + .maximum = 0xff, + .step = 1, + .default_value = 0x7f, + .type = V4L2_CTRL_TYPE_INTEGER, + }, + .off = 0, + .reg = CHROMA_CTRL, + .mask = 0x00ff, + .shift = 0, + }, { + /* --- audio --- */ + .v = { + .id = V4L2_CID_AUDIO_MUTE, + .name = "Mute", + .minimum = 0, + .maximum = 1, + .default_value = 1, + .type = V4L2_CTRL_TYPE_BOOLEAN, + }, + .reg = PATH1_CTL1, + .mask = (0x1f << 24), + .shift = 24, + }, { + .v = { + .id = V4L2_CID_AUDIO_VOLUME, + .name = "Volume", + .minimum = 0, + .maximum = 0x3f, + .step = 1, + .default_value = 0x3f, + .type = V4L2_CTRL_TYPE_INTEGER, + }, + .reg = PATH1_VOL_CTL, + .mask = 0xff, + .shift = 0, + } +}; +static const int CX23885_CTLS = ARRAY_SIZE(cx23885_ctls); + +const u32 cx23885_user_ctrls[] = { + V4L2_CID_USER_CLASS, + V4L2_CID_BRIGHTNESS, + V4L2_CID_CONTRAST, + V4L2_CID_SATURATION, + V4L2_CID_HUE, + V4L2_CID_AUDIO_VOLUME, + V4L2_CID_AUDIO_MUTE, + 0 +}; +EXPORT_SYMBOL(cx23885_user_ctrls); + +static const u32 *ctrl_classes[] = { + cx23885_user_ctrls, + NULL +}; + +void cx23885_video_wakeup(struct cx23885_dev *dev, + struct cx23885_dmaqueue *q, u32 count) +{ + struct cx23885_buffer *buf; + int bc; + + for (bc = 0;; bc++) { + if (list_empty(&q->active)) + break; + buf = list_entry(q->active.next, + struct cx23885_buffer, vb.queue); + /* count comes from the hw and is is 16bit wide -- + * this trick handles wrap-arounds correctly for + * up to 32767 buffers in flight... */ + if ((s16) (count - buf->count) < 0) + break; + do_gettimeofday(&buf->vb.ts); + dprintk(2, "[%p/%d] wakeup reg=%d buf=%d\n", buf, buf->vb.i, + count, buf->count); + buf->vb.state = VIDEOBUF_DONE; + list_del(&buf->vb.queue); + wake_up(&buf->vb.done); + } + if (list_empty(&q->active)) { + del_timer(&q->timeout); + } else { + mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); + } + if (bc != 1) + printk(KERN_WARN "%s: %d buffers handled (should be 1)\n", + __FUNCTION__, bc); +} + +int cx23885_set_tvnorm(struct cx23885_dev *dev, v4l2_std_id norm) +{ + dprintk(1, "%s(norm = 0x%08x) name: [%s]\n", + __FUNCTION__, + (unsigned int)norm, + v4l2_norm_to_name(norm)); + + dev->tvnorm = norm; + + + /* Tell the analog tuner/demods */ + cx23885_call_i2c_clients(&dev->i2c_bus[1], VIDIOC_S_STD, &norm); + + /* Tell the internal A/V decoder */ + cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_S_STD, &norm); + + return 0; +} + +struct video_device *cx23885_vdev_init(struct cx23885_dev *dev, + struct pci_dev *pci, + struct video_device *template, + char *type) +{ + struct video_device *vfd; + dprintk(1, "%s()\n", __FUNCTION__); + + vfd = video_device_alloc(); + if (NULL == vfd) + return NULL; + *vfd = *template; + vfd->minor = -1; + vfd->dev = &pci->dev; + vfd->release = video_device_release; + snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)", + dev->name, type, cx23885_boards[dev->board].name); + return vfd; +} + +int cx23885_ctrl_query(struct v4l2_queryctrl *qctrl) +{ + int i; + + if (qctrl->id < V4L2_CID_BASE || + qctrl->id >= V4L2_CID_LASTP1) + return -EINVAL; + for (i = 0; i < CX23885_CTLS; i++) + if (cx23885_ctls[i].v.id == qctrl->id) + break; + if (i == CX23885_CTLS) { + *qctrl = no_ctl; + return 0; + } + *qctrl = cx23885_ctls[i].v; + return 0; +} +EXPORT_SYMBOL(cx23885_ctrl_query); + +/* ------------------------------------------------------------------- */ +/* resource management */ + +static int res_get(struct cx23885_dev *dev, struct cx23885_fh *fh, + unsigned int bit) +{ + dprintk(1, "%s()\n", __FUNCTION__); + if (fh->resources & bit) + /* have it already allocated */ + return 1; + + /* is it free? */ + mutex_lock(&dev->lock); + if (dev->resources & bit) { + /* no, someone else uses it */ + mutex_unlock(&dev->lock); + return 0; + } + /* it's free, grab it */ + fh->resources |= bit; + dev->resources |= bit; + dprintk(1, "res: get %d\n", bit); + mutex_unlock(&dev->lock); + return 1; +} + +static int res_check(struct cx23885_fh *fh, unsigned int bit) +{ + return (fh->resources & bit); +} + +static int res_locked(struct cx23885_dev *dev, unsigned int bit) +{ + return (dev->resources & bit); +} + +static void res_free(struct cx23885_dev *dev, struct cx23885_fh *fh, + unsigned int bits) +{ + BUG_ON((fh->resources & bits) != bits); + dprintk(1, "%s()\n", __FUNCTION__); + + mutex_lock(&dev->lock); + fh->resources &= ~bits; + dev->resources &= ~bits; + dprintk(1, "res: put %d\n", bits); + mutex_unlock(&dev->lock); +} + +int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input) +{ + struct v4l2_routing route; + memset(&route, 0, sizeof(route)); + + dprintk(1, "%s() video_mux: %d [vmux=%d, gpio=0x%x,0x%x,0x%x,0x%x]\n", + __FUNCTION__, + input, INPUT(input)->vmux, + INPUT(input)->gpio0, INPUT(input)->gpio1, + INPUT(input)->gpio2, INPUT(input)->gpio3); + dev->input = input; + + route.input = INPUT(input)->vmux; + + /* Tell the internal A/V decoder */ + cx23885_call_i2c_clients(&dev->i2c_bus[2], + VIDIOC_INT_S_VIDEO_ROUTING, &route); + + return 0; +} +EXPORT_SYMBOL(cx23885_video_mux); + +/* ------------------------------------------------------------------ */ +int cx23885_set_scale(struct cx23885_dev *dev, unsigned int width, + unsigned int height, enum v4l2_field field) +{ + dprintk(1, "%s()\n", __FUNCTION__); + return 0; +} + +static int cx23885_start_video_dma(struct cx23885_dev *dev, + struct cx23885_dmaqueue *q, + struct cx23885_buffer *buf) +{ + dprintk(1, "%s()\n", __FUNCTION__); + + /* setup fifo + format */ + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH01], + buf->bpl, buf->risc.dma); + cx23885_set_scale(dev, buf->vb.width, buf->vb.height, buf->vb.field); + + /* reset counter */ + cx_write(VID_A_GPCNT_CTL, 3); + q->count = 1; + + /* enable irq */ + cx_set(PCI_INT_MSK, cx_read(PCI_INT_MSK) | 0x01); + cx_set(VID_A_INT_MSK, 0x000011); + + /* start dma */ + cx_set(DEV_CNTRL2, (1<<5)); + cx_set(VID_A_DMA_CTL, 0x11); /* FIFO and RISC enable */ + + return 0; +} + +#ifdef CONFIG_PM +static int cx23885_stop_video_dma(struct cx23885_dev *dev) +{ + dprintk(1, "%s()\n", __FUNCTION__); + /* stop dma */ + cx_clear(VID_A_DMA_CTL, 0x11); + + /* disable irqs */ + cx_clear(PCI_INT_MSK, 0x000001); + cx_clear(VID_A_INT_MSK, 0x000011); + + return 0; +} +#endif + +static int cx23885_restart_video_queue(struct cx23885_dev *dev, + struct cx23885_dmaqueue *q) +{ + struct cx23885_buffer *buf, *prev; + struct list_head *item; + dprintk(1, "%s()\n", __FUNCTION__); + + if (!list_empty(&q->active)) { + buf = list_entry(q->active.next, struct cx23885_buffer, + vb.queue); + dprintk(2, "restart_queue [%p/%d]: restart dma\n", + buf, buf->vb.i); + cx23885_start_video_dma(dev, q, buf); + list_for_each(item, &q->active) { + buf = list_entry(item, struct cx23885_buffer, + vb.queue); + buf->count = q->count++; + } + mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); + return 0; + } + + prev = NULL; + for (;;) { + if (list_empty(&q->queued)) + return 0; + buf = list_entry(q->queued.next, struct cx23885_buffer, + vb.queue); + if (NULL == prev) { + list_move_tail(&buf->vb.queue, &q->active); + cx23885_start_video_dma(dev, q, buf); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); + dprintk(2, "[%p/%d] restart_queue - first active\n", + buf, buf->vb.i); + + } else if (prev->vb.width == buf->vb.width && + prev->vb.height == buf->vb.height && + prev->fmt == buf->fmt) { + list_move_tail(&buf->vb.queue, &q->active); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); + prev->risc.jmp[2] = cpu_to_le32(0); /* Bits 63 - 32 */ + dprintk(2, "[%p/%d] restart_queue - move to active\n", + buf, buf->vb.i); + } else { + return 0; + } + prev = buf; + } +} + +static int buffer_setup(struct videobuf_queue *q, unsigned int *count, + unsigned int *size) +{ + struct cx23885_fh *fh = q->priv_data; + + *size = fh->fmt->depth*fh->width*fh->height >> 3; + if (0 == *count) + *count = 32; + while (*size * *count > vid_limit * 1024 * 1024) + (*count)--; + return 0; +} + +static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct cx23885_fh *fh = q->priv_data; + struct cx23885_dev *dev = fh->dev; + struct cx23885_buffer *buf = + container_of(vb, struct cx23885_buffer, vb); + int rc, init_buffer = 0; + u32 line0_offset, line1_offset; + struct videobuf_dmabuf *dma = videobuf_to_dma(&buf->vb); + + BUG_ON(NULL == fh->fmt); + if (fh->width < 48 || fh->width > norm_maxw(dev->tvnorm) || + fh->height < 32 || fh->height > norm_maxh(dev->tvnorm)) + return -EINVAL; + buf->vb.size = (fh->width * fh->height * fh->fmt->depth) >> 3; + if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) + return -EINVAL; + + if (buf->fmt != fh->fmt || + buf->vb.width != fh->width || + buf->vb.height != fh->height || + buf->vb.field != field) { + buf->fmt = fh->fmt; + buf->vb.width = fh->width; + buf->vb.height = fh->height; + buf->vb.field = field; + init_buffer = 1; + } + + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { + init_buffer = 1; + rc = videobuf_iolock(q, &buf->vb, NULL); + if (0 != rc) + goto fail; + } + + if (init_buffer) { + buf->bpl = buf->vb.width * buf->fmt->depth >> 3; + switch (buf->vb.field) { + case V4L2_FIELD_TOP: + cx23885_risc_buffer(dev->pci, &buf->risc, + dma->sglist, 0, UNSET, + buf->bpl, 0, buf->vb.height); + break; + case V4L2_FIELD_BOTTOM: + cx23885_risc_buffer(dev->pci, &buf->risc, + dma->sglist, UNSET, 0, + buf->bpl, 0, buf->vb.height); + break; + case V4L2_FIELD_INTERLACED: + if (dev->tvnorm & V4L2_STD_NTSC) { + /* cx25840 transmits NTSC bottom field first */ + dprintk(1, "%s() Creating NTSC risc\n", + __FUNCTION__); + line0_offset = buf->bpl; + line1_offset = 0; + } else { + /* All other formats are top field first */ + dprintk(1, "%s() Creating PAL/SECAM risc\n", + __FUNCTION__); + line0_offset = 0; + line1_offset = buf->bpl; + } + cx23885_risc_buffer(dev->pci, &buf->risc, + dma->sglist, line0_offset, + line1_offset, + buf->bpl, buf->bpl, + buf->vb.height >> 1); + break; + case V4L2_FIELD_SEQ_TB: + cx23885_risc_buffer(dev->pci, &buf->risc, + dma->sglist, + 0, buf->bpl * (buf->vb.height >> 1), + buf->bpl, 0, + buf->vb.height >> 1); + break; + case V4L2_FIELD_SEQ_BT: + cx23885_risc_buffer(dev->pci, &buf->risc, + dma->sglist, + buf->bpl * (buf->vb.height >> 1), 0, + buf->bpl, 0, + buf->vb.height >> 1); + break; + default: + BUG(); + } + } + dprintk(2, "[%p/%d] buffer_prep - %dx%d %dbpp \"%s\" - dma=0x%08lx\n", + buf, buf->vb.i, + fh->width, fh->height, fh->fmt->depth, fh->fmt->name, + (unsigned long)buf->risc.dma); + + buf->vb.state = VIDEOBUF_PREPARED; + return 0; + + fail: + cx23885_free_buffer(q, buf); + return rc; +} + +static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) +{ + struct cx23885_buffer *buf = container_of(vb, + struct cx23885_buffer, vb); + struct cx23885_buffer *prev; + struct cx23885_fh *fh = vq->priv_data; + struct cx23885_dev *dev = fh->dev; + struct cx23885_dmaqueue *q = &dev->vidq; + + /* add jump to stopper */ + buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC); + buf->risc.jmp[1] = cpu_to_le32(q->stopper.dma); + buf->risc.jmp[2] = cpu_to_le32(0); /* bits 63-32 */ + + if (!list_empty(&q->queued)) { + list_add_tail(&buf->vb.queue, &q->queued); + buf->vb.state = VIDEOBUF_QUEUED; + dprintk(2, "[%p/%d] buffer_queue - append to queued\n", + buf, buf->vb.i); + + } else if (list_empty(&q->active)) { + list_add_tail(&buf->vb.queue, &q->active); + cx23885_start_video_dma(dev, q, buf); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); + dprintk(2, "[%p/%d] buffer_queue - first active\n", + buf, buf->vb.i); + + } else { + prev = list_entry(q->active.prev, struct cx23885_buffer, + vb.queue); + if (prev->vb.width == buf->vb.width && + prev->vb.height == buf->vb.height && + prev->fmt == buf->fmt) { + list_add_tail(&buf->vb.queue, &q->active); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); + /* 64 bit bits 63-32 */ + prev->risc.jmp[2] = cpu_to_le32(0); + dprintk(2, "[%p/%d] buffer_queue - append to active\n", + buf, buf->vb.i); + + } else { + list_add_tail(&buf->vb.queue, &q->queued); + buf->vb.state = VIDEOBUF_QUEUED; + dprintk(2, "[%p/%d] buffer_queue - first queued\n", + buf, buf->vb.i); + } + } +} + +static void buffer_release(struct videobuf_queue *q, + struct videobuf_buffer *vb) +{ + struct cx23885_buffer *buf = container_of(vb, + struct cx23885_buffer, vb); + + cx23885_free_buffer(q, buf); +} + +static struct videobuf_queue_ops cx23885_video_qops = { + .buf_setup = buffer_setup, + .buf_prepare = buffer_prepare, + .buf_queue = buffer_queue, + .buf_release = buffer_release, +}; + +static struct videobuf_queue *get_queue(struct cx23885_fh *fh) +{ + switch (fh->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + return &fh->vidq; + case V4L2_BUF_TYPE_VBI_CAPTURE: + return &fh->vbiq; + default: + BUG(); + return NULL; + } +} + +static int get_resource(struct cx23885_fh *fh) +{ + switch (fh->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + return RESOURCE_VIDEO; + case V4L2_BUF_TYPE_VBI_CAPTURE: + return RESOURCE_VBI; + default: + BUG(); + return 0; + } +} + +static int video_open(struct inode *inode, struct file *file) +{ + int minor = iminor(inode); + struct cx23885_dev *h, *dev = NULL; + struct cx23885_fh *fh; + struct list_head *list; + enum v4l2_buf_type type = 0; + int radio = 0; + + list_for_each(list, &cx23885_devlist) { + h = list_entry(list, struct cx23885_dev, devlist); + if (h->video_dev->minor == minor) { + dev = h; + type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + } + if (h->vbi_dev && + h->vbi_dev->minor == minor) { + dev = h; + type = V4L2_BUF_TYPE_VBI_CAPTURE; + } + if (h->radio_dev && + h->radio_dev->minor == minor) { + radio = 1; + dev = h; + } + } + if (NULL == dev) + return -ENODEV; + + dprintk(1, "open minor=%d radio=%d type=%s\n", + minor, radio, v4l2_type_names[type]); + + /* allocate + initialize per filehandle data */ + fh = kzalloc(sizeof(*fh), GFP_KERNEL); + if (NULL == fh) + return -ENOMEM; + file->private_data = fh; + fh->dev = dev; + fh->radio = radio; + fh->type = type; + fh->width = 320; + fh->height = 240; + fh->fmt = format_by_fourcc(V4L2_PIX_FMT_BGR24); + + videobuf_queue_pci_init(&fh->vidq, &cx23885_video_qops, + dev->pci, &dev->slock, + V4L2_BUF_TYPE_VIDEO_CAPTURE, + V4L2_FIELD_INTERLACED, + sizeof(struct cx23885_buffer), + fh); + + dprintk(1, "post videobuf_queue_init()\n"); + + + return 0; +} + +static ssize_t video_read(struct file *file, char __user *data, + size_t count, loff_t *ppos) +{ + struct cx23885_fh *fh = file->private_data; + + switch (fh->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + if (res_locked(fh->dev, RESOURCE_VIDEO)) + return -EBUSY; + return videobuf_read_one(&fh->vidq, data, count, ppos, + file->f_flags & O_NONBLOCK); + case V4L2_BUF_TYPE_VBI_CAPTURE: + if (!res_get(fh->dev, fh, RESOURCE_VBI)) + return -EBUSY; + return videobuf_read_stream(&fh->vbiq, data, count, ppos, 1, + file->f_flags & O_NONBLOCK); + default: + BUG(); + return 0; + } +} + +static unsigned int video_poll(struct file *file, + struct poll_table_struct *wait) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_buffer *buf; + + if (V4L2_BUF_TYPE_VBI_CAPTURE == fh->type) { + if (!res_get(fh->dev, fh, RESOURCE_VBI)) + return POLLERR; + return videobuf_poll_stream(file, &fh->vbiq, wait); + } + + if (res_check(fh, RESOURCE_VIDEO)) { + /* streaming capture */ + if (list_empty(&fh->vidq.stream)) + return POLLERR; + buf = list_entry(fh->vidq.stream.next, + struct cx23885_buffer, vb.stream); + } else { + /* read() capture */ + buf = (struct cx23885_buffer *)fh->vidq.read_buf; + if (NULL == buf) + return POLLERR; + } + poll_wait(file, &buf->vb.done, wait); + if (buf->vb.state == VIDEOBUF_DONE || + buf->vb.state == VIDEOBUF_ERROR) + return POLLIN|POLLRDNORM; + return 0; +} + +static int video_release(struct inode *inode, struct file *file) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + /* turn off overlay */ + if (res_check(fh, RESOURCE_OVERLAY)) { + /* FIXME */ + res_free(dev, fh, RESOURCE_OVERLAY); + } + + /* stop video capture */ + if (res_check(fh, RESOURCE_VIDEO)) { + videobuf_queue_cancel(&fh->vidq); + res_free(dev, fh, RESOURCE_VIDEO); + } + if (fh->vidq.read_buf) { + buffer_release(&fh->vidq, fh->vidq.read_buf); + kfree(fh->vidq.read_buf); + } + + /* stop vbi capture */ + if (res_check(fh, RESOURCE_VBI)) { + if (fh->vbiq.streaming) + videobuf_streamoff(&fh->vbiq); + if (fh->vbiq.reading) + videobuf_read_stop(&fh->vbiq); + res_free(dev, fh, RESOURCE_VBI); + } + + videobuf_mmap_free(&fh->vidq); + file->private_data = NULL; + kfree(fh); + + + return 0; +} + +static int video_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct cx23885_fh *fh = file->private_data; + + return videobuf_mmap_mapper(get_queue(fh), vma); +} + +/* ------------------------------------------------------------------ */ +/* VIDEO CTRL IOCTLS */ + +int cx23885_get_control(struct cx23885_dev *dev, struct v4l2_control *ctl) +{ + dprintk(1, "%s() calling cx25840(VIDIOC_G_CTRL)\n", __FUNCTION__); + cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_G_CTRL, ctl); + return 0; +} +EXPORT_SYMBOL(cx23885_get_control); + +int cx23885_set_control(struct cx23885_dev *dev, struct v4l2_control *ctl) +{ + dprintk(1, "%s() calling cx25840(VIDIOC_S_CTRL)" + " (disabled - no action)\n", __FUNCTION__); + return 0; +} +EXPORT_SYMBOL(cx23885_set_control); + +static void init_controls(struct cx23885_dev *dev) +{ + struct v4l2_control ctrl; + int i; + + for (i = 0; i < CX23885_CTLS; i++) { + ctrl.id = cx23885_ctls[i].v.id; + ctrl.value = cx23885_ctls[i].v.default_value; + + cx23885_set_control(dev, &ctrl); + } +} + +/* ------------------------------------------------------------------ */ +/* VIDEO IOCTLS */ + +static int vidioc_g_fmt_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx23885_fh *fh = priv; + + f->fmt.pix.width = fh->width; + f->fmt.pix.height = fh->height; + f->fmt.pix.field = fh->vidq.field; + f->fmt.pix.pixelformat = fh->fmt->fourcc; + f->fmt.pix.bytesperline = + (f->fmt.pix.width * fh->fmt->depth) >> 3; + f->fmt.pix.sizeimage = + f->fmt.pix.height * f->fmt.pix.bytesperline; + + return 0; +} + +static int vidioc_try_fmt_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + struct cx23885_fmt *fmt; + enum v4l2_field field; + unsigned int maxw, maxh; + + fmt = format_by_fourcc(f->fmt.pix.pixelformat); + if (NULL == fmt) + return -EINVAL; + + field = f->fmt.pix.field; + maxw = norm_maxw(dev->tvnorm); + maxh = norm_maxh(dev->tvnorm); + + if (V4L2_FIELD_ANY == field) { + field = (f->fmt.pix.height > maxh/2) + ? V4L2_FIELD_INTERLACED + : V4L2_FIELD_BOTTOM; + } + + switch (field) { + case V4L2_FIELD_TOP: + case V4L2_FIELD_BOTTOM: + maxh = maxh / 2; + break; + case V4L2_FIELD_INTERLACED: + break; + default: + return -EINVAL; + } + + f->fmt.pix.field = field; + if (f->fmt.pix.height < 32) + f->fmt.pix.height = 32; + if (f->fmt.pix.height > maxh) + f->fmt.pix.height = maxh; + if (f->fmt.pix.width < 48) + f->fmt.pix.width = 48; + if (f->fmt.pix.width > maxw) + f->fmt.pix.width = maxw; + f->fmt.pix.width &= ~0x03; + f->fmt.pix.bytesperline = + (f->fmt.pix.width * fmt->depth) >> 3; + f->fmt.pix.sizeimage = + f->fmt.pix.height * f->fmt.pix.bytesperline; + + return 0; +} + +static int vidioc_s_fmt_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + int err; + + dprintk(2, "%s()\n", __FUNCTION__); + err = vidioc_try_fmt_cap(file, priv, f); + + if (0 != err) + return err; + fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat); + fh->width = f->fmt.pix.width; + fh->height = f->fmt.pix.height; + fh->vidq.field = f->fmt.pix.field; + dprintk(2, "%s() width=%d height=%d field=%d\n", __FUNCTION__, + fh->width, fh->height, fh->vidq.field); + cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_S_FMT, f); + return 0; +} + +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + strcpy(cap->driver, "cx23885"); + strlcpy(cap->card, cx23885_boards[dev->board].name, + sizeof(cap->card)); + sprintf(cap->bus_info, "PCIe:%s", pci_name(dev->pci)); + cap->version = CX23885_VERSION_CODE; + cap->capabilities = + V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_READWRITE | + V4L2_CAP_STREAMING | + V4L2_CAP_VBI_CAPTURE; + if (UNSET != dev->tuner_type) + cap->capabilities |= V4L2_CAP_TUNER; + return 0; +} + +static int vidioc_enum_fmt_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + if (unlikely(f->index >= ARRAY_SIZE(formats))) + return -EINVAL; + + strlcpy(f->description, formats[f->index].name, + sizeof(f->description)); + f->pixelformat = formats[f->index].fourcc; + + return 0; +} + +#ifdef CONFIG_VIDEO_V4L1_COMPAT +static int vidiocgmbuf(struct file *file, void *priv, + struct video_mbuf *mbuf) +{ + struct cx23885_fh *fh = priv; + struct videobuf_queue *q; + struct v4l2_requestbuffers req; + unsigned int i; + int err; + + q = get_queue(fh); + memset(&req, 0, sizeof(req)); + req.type = q->type; + req.count = 8; + req.memory = V4L2_MEMORY_MMAP; + err = videobuf_reqbufs(q, &req); + if (err < 0) + return err; + + mbuf->frames = req.count; + mbuf->size = 0; + for (i = 0; i < mbuf->frames; i++) { + mbuf->offsets[i] = q->bufs[i]->boff; + mbuf->size += q->bufs[i]->bsize; + } + return 0; +} +#endif + +static int vidioc_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *p) +{ + struct cx23885_fh *fh = priv; + return (videobuf_reqbufs(get_queue(fh), p)); +} + +static int vidioc_querybuf(struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct cx23885_fh *fh = priv; + return (videobuf_querybuf(get_queue(fh), p)); +} + +static int vidioc_qbuf(struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct cx23885_fh *fh = priv; + return (videobuf_qbuf(get_queue(fh), p)); +} + +static int vidioc_dqbuf(struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct cx23885_fh *fh = priv; + return (videobuf_dqbuf(get_queue(fh), p, + file->f_flags & O_NONBLOCK)); +} + +static int vidioc_streamon(struct file *file, void *priv, + enum v4l2_buf_type i) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + dprintk(1, "%s()\n", __FUNCTION__); + + if (unlikely(fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)) + return -EINVAL; + if (unlikely(i != fh->type)) + return -EINVAL; + + if (unlikely(!res_get(dev, fh, get_resource(fh)))) + return -EBUSY; + return videobuf_streamon(get_queue(fh)); +} + +static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + int err, res; + dprintk(1, "%s()\n", __FUNCTION__); + + if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + if (i != fh->type) + return -EINVAL; + + res = get_resource(fh); + err = videobuf_streamoff(get_queue(fh)); + if (err < 0) + return err; + res_free(dev, fh, res); + return 0; +} + +static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *tvnorms) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + dprintk(1, "%s()\n", __FUNCTION__); + + mutex_lock(&dev->lock); + cx23885_set_tvnorm(dev, *tvnorms); + mutex_unlock(&dev->lock); + + return 0; +} + +int cx23885_enum_input(struct cx23885_dev *dev, struct v4l2_input *i) +{ + static const char *iname[] = { + [CX23885_VMUX_COMPOSITE1] = "Composite1", + [CX23885_VMUX_COMPOSITE2] = "Composite2", + [CX23885_VMUX_COMPOSITE3] = "Composite3", + [CX23885_VMUX_COMPOSITE4] = "Composite4", + [CX23885_VMUX_SVIDEO] = "S-Video", + [CX23885_VMUX_TELEVISION] = "Television", + [CX23885_VMUX_CABLE] = "Cable TV", + [CX23885_VMUX_DVB] = "DVB", + [CX23885_VMUX_DEBUG] = "for debug only", + }; + unsigned int n; + dprintk(1, "%s()\n", __FUNCTION__); + + n = i->index; + if (n >= 4) + return -EINVAL; + + if (0 == INPUT(n)->type) + return -EINVAL; + + memset(i, 0, sizeof(*i)); + i->index = n; + i->type = V4L2_INPUT_TYPE_CAMERA; + strcpy(i->name, iname[INPUT(n)->type]); + if ((CX23885_VMUX_TELEVISION == INPUT(n)->type) || + (CX23885_VMUX_CABLE == INPUT(n)->type)) + i->type = V4L2_INPUT_TYPE_TUNER; + i->std = CX23885_NORMS; + return 0; +} +EXPORT_SYMBOL(cx23885_enum_input); + +static int vidioc_enum_input(struct file *file, void *priv, + struct v4l2_input *i) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + dprintk(1, "%s()\n", __FUNCTION__); + return cx23885_enum_input(dev, i); +} + +static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + *i = dev->input; + dprintk(1, "%s() returns %d\n", __FUNCTION__, *i); + return 0; +} + +static int vidioc_s_input(struct file *file, void *priv, unsigned int i) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + dprintk(1, "%s(%d)\n", __FUNCTION__, i); + + if (i >= 4) { + dprintk(1, "%s() -EINVAL\n", __FUNCTION__); + return -EINVAL; + } + + mutex_lock(&dev->lock); + cx23885_video_mux(dev, i); + mutex_unlock(&dev->lock); + return 0; +} + +static int vidioc_queryctrl(struct file *file, void *priv, + struct v4l2_queryctrl *qctrl) +{ + qctrl->id = v4l2_ctrl_next(ctrl_classes, qctrl->id); + if (unlikely(qctrl->id == 0)) + return -EINVAL; + return cx23885_ctrl_query(qctrl); +} + +static int vidioc_g_ctrl(struct file *file, void *priv, + struct v4l2_control *ctl) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + return cx23885_get_control(dev, ctl); +} + +static int vidioc_s_ctrl(struct file *file, void *priv, + struct v4l2_control *ctl) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + return cx23885_set_control(dev, ctl); +} + +static int vidioc_g_tuner(struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + if (unlikely(UNSET == dev->tuner_type)) + return -EINVAL; + if (0 != t->index) + return -EINVAL; + + strcpy(t->name, "Television"); + t->type = V4L2_TUNER_ANALOG_TV; + t->capability = V4L2_TUNER_CAP_NORM; + t->rangehigh = 0xffffffffUL; + t->signal = 0xffff ; /* LOCKED */ + return 0; +} + +static int vidioc_s_tuner(struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + if (UNSET == dev->tuner_type) + return -EINVAL; + if (0 != t->index) + return -EINVAL; + return 0; +} + +static int vidioc_g_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + + if (unlikely(UNSET == dev->tuner_type)) + return -EINVAL; + + /* f->type = fh->radio ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; */ + f->type = fh->radio ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; + f->frequency = dev->freq; + + cx23885_call_i2c_clients(&dev->i2c_bus[1], VIDIOC_G_FREQUENCY, f); + + return 0; +} + +int cx23885_set_freq(struct cx23885_dev *dev, struct v4l2_frequency *f) +{ + if (unlikely(UNSET == dev->tuner_type)) + return -EINVAL; + if (unlikely(f->tuner != 0)) + return -EINVAL; + + mutex_lock(&dev->lock); + dev->freq = f->frequency; + + cx23885_call_i2c_clients(&dev->i2c_bus[1], VIDIOC_S_FREQUENCY, f); + + /* When changing channels it is required to reset TVAUDIO */ + msleep(10); + + mutex_unlock(&dev->lock); + + return 0; +} +EXPORT_SYMBOL(cx23885_set_freq); + +static int vidioc_s_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + + if (unlikely(0 == fh->radio && f->type != V4L2_TUNER_ANALOG_TV)) + return -EINVAL; + if (unlikely(1 == fh->radio && f->type != V4L2_TUNER_RADIO)) + return -EINVAL; + + return + cx23885_set_freq(dev, f); +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int vidioc_g_register(struct file *file, void *fh, + struct v4l2_register *reg) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)fh)->dev; + + cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_DBG_G_REGISTER, reg); + + return 0; +} + +static int vidioc_s_register(struct file *file, void *fh, + struct v4l2_register *reg) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)fh)->dev; + + cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_DBG_S_REGISTER, reg); + return 0; +} +#endif + +/* ----------------------------------------------------------- */ +/* RADIO ESPECIFIC IOCTLS */ +/* ----------------------------------------------------------- */ + +static int radio_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + strcpy(cap->driver, "cx23885"); + strlcpy(cap->card, cx23885_boards[dev->board].name, + sizeof(cap->card)); + sprintf(cap->bus_info, "PCIe:%s", pci_name(dev->pci)); + cap->version = CX23885_VERSION_CODE; + cap->capabilities = V4L2_CAP_TUNER; + return 0; +} + +static int radio_g_tuner(struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + if (unlikely(t->index > 0)) + return -EINVAL; + + strcpy(t->name, "Radio"); + t->type = V4L2_TUNER_RADIO; + + cx23885_call_i2c_clients(&dev->i2c_bus[1], VIDIOC_G_TUNER, t); + return 0; +} + +static int radio_enum_input(struct file *file, void *priv, + struct v4l2_input *i) +{ + if (i->index != 0) + return -EINVAL; + strcpy(i->name, "Radio"); + i->type = V4L2_INPUT_TYPE_TUNER; + + return 0; +} + +static int radio_g_audio(struct file *file, void *priv, struct v4l2_audio *a) +{ + if (unlikely(a->index)) + return -EINVAL; + + memset(a, 0, sizeof(*a)); + strcpy(a->name, "Radio"); + return 0; +} + +/* FIXME: Should add a standard for radio */ + +static int radio_s_tuner(struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + if (0 != t->index) + return -EINVAL; + + cx23885_call_i2c_clients(&dev->i2c_bus[1], VIDIOC_S_TUNER, t); + + return 0; +} + +static int radio_s_audio(struct file *file, void *fh, + struct v4l2_audio *a) +{ + return 0; +} + +static int radio_s_input(struct file *file, void *fh, unsigned int i) +{ + return 0; +} + +static int radio_queryctrl(struct file *file, void *priv, + struct v4l2_queryctrl *c) +{ + int i; + + if (c->id < V4L2_CID_BASE || + c->id >= V4L2_CID_LASTP1) + return -EINVAL; + if (c->id == V4L2_CID_AUDIO_MUTE) { + for (i = 0; i < CX23885_CTLS; i++) + if (cx23885_ctls[i].v.id == c->id) + break; + *c = cx23885_ctls[i].v; + } else + *c = no_ctl; + return 0; +} + +/* ----------------------------------------------------------- */ + +static void cx23885_vid_timeout(unsigned long data) +{ + struct cx23885_dev *dev = (struct cx23885_dev *)data; + struct cx23885_dmaqueue *q = &dev->vidq; + struct cx23885_buffer *buf; + unsigned long flags; + + cx23885_sram_channel_dump(dev, &dev->sram_channels[SRAM_CH01]); + + cx_clear(VID_A_DMA_CTL, 0x11); + + spin_lock_irqsave(&dev->slock, flags); + while (!list_empty(&q->active)) { + buf = list_entry(q->active.next, + struct cx23885_buffer, vb.queue); + list_del(&buf->vb.queue); + buf->vb.state = VIDEOBUF_ERROR; + wake_up(&buf->vb.done); + printk(KERN_ERR "%s/0: [%p/%d] timeout - dma=0x%08lx\n", + dev->name, buf, buf->vb.i, + (unsigned long)buf->risc.dma); + } + cx23885_restart_video_queue(dev, q); + spin_unlock_irqrestore(&dev->slock, flags); +} + +int cx23885_video_irq(struct cx23885_dev *dev, u32 status) +{ + u32 mask, count; + int handled = 0; + + mask = cx_read(VID_A_INT_MSK); + if (0 == (status & mask)) + return handled; + cx_write(VID_A_INT_STAT, status); + + dprintk(2, "%s() status = 0x%08x\n", __FUNCTION__, status); + /* risc op code error */ + if (status & (1 << 16)) { + printk(KERN_WARNING "%s/0: video risc op code error\n", + dev->name); + cx_clear(VID_A_DMA_CTL, 0x11); + cx23885_sram_channel_dump(dev, &dev->sram_channels[SRAM_CH01]); + } + + /* risc1 y */ + if (status & 0x01) { + spin_lock(&dev->slock); + count = cx_read(VID_A_GPCNT); + cx23885_video_wakeup(dev, &dev->vidq, count); + spin_unlock(&dev->slock); + handled++; + } + /* risc2 y */ + if (status & 0x10) { + dprintk(2, "stopper video\n"); + spin_lock(&dev->slock); + cx23885_restart_video_queue(dev, &dev->vidq); + spin_unlock(&dev->slock); + handled++; + } + + return handled; +} + + +/* ----------------------------------------------------------- */ +/* exported stuff */ + +static const struct file_operations video_fops = { + .owner = THIS_MODULE, + .open = video_open, + .release = video_release, + .read = video_read, + .poll = video_poll, + .mmap = video_mmap, + .ioctl = video_ioctl2, + .compat_ioctl = v4l_compat_ioctl32, + .llseek = no_llseek, +}; + +static struct video_device cx23885_vbi_template; +static struct video_device cx23885_video_template = { + .name = "cx23885-video", + .type = VID_TYPE_CAPTURE|VID_TYPE_TUNER|VID_TYPE_SCALES, + .fops = &video_fops, + .minor = -1, + .vidioc_querycap = vidioc_querycap, + .vidioc_enum_fmt_cap = vidioc_enum_fmt_cap, + .vidioc_g_fmt_cap = vidioc_g_fmt_cap, + .vidioc_try_fmt_cap = vidioc_try_fmt_cap, + .vidioc_s_fmt_cap = vidioc_s_fmt_cap, + .vidioc_g_fmt_vbi = cx23885_vbi_fmt, + .vidioc_try_fmt_vbi = cx23885_vbi_fmt, + .vidioc_s_fmt_vbi = cx23885_vbi_fmt, + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + .vidioc_s_std = vidioc_s_std, + .vidioc_enum_input = vidioc_enum_input, + .vidioc_g_input = vidioc_g_input, + .vidioc_s_input = vidioc_s_input, + .vidioc_queryctrl = vidioc_queryctrl, + .vidioc_g_ctrl = vidioc_g_ctrl, + .vidioc_s_ctrl = vidioc_s_ctrl, + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, +#ifdef CONFIG_VIDEO_V4L1_COMPAT + .vidiocgmbuf = vidiocgmbuf, +#endif + .vidioc_g_tuner = vidioc_g_tuner, + .vidioc_s_tuner = vidioc_s_tuner, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_s_frequency = vidioc_s_frequency, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = vidioc_g_register, + .vidioc_s_register = vidioc_s_register, +#endif + .tvnorms = CX23885_NORMS, + .current_norm = V4L2_STD_NTSC_M, +}; + +static const struct file_operations radio_fops = { + .owner = THIS_MODULE, + .open = video_open, + .release = video_release, + .ioctl = video_ioctl2, + .compat_ioctl = v4l_compat_ioctl32, + .llseek = no_llseek, +}; + + +void cx23885_video_unregister(struct cx23885_dev *dev) +{ + dprintk(1, "%s()\n", __FUNCTION__); + cx_clear(PCI_INT_MSK, 1); + + if (dev->video_dev) { + if (-1 != dev->video_dev->minor) + video_unregister_device(dev->video_dev); + else + video_device_release(dev->video_dev); + dev->video_dev = NULL; + + btcx_riscmem_free(dev->pci, &dev->vidq.stopper); + } +} + +int cx23885_video_register(struct cx23885_dev *dev) +{ + int err; + + dprintk(1, "%s()\n", __FUNCTION__); + spin_lock_init(&dev->slock); + + /* Initialize VBI template */ + memcpy(&cx23885_vbi_template, &cx23885_video_template, + sizeof(cx23885_vbi_template)); + strcpy(cx23885_vbi_template.name, "cx23885-vbi"); + cx23885_vbi_template.type = VID_TYPE_TELETEXT|VID_TYPE_TUNER; + + dev->tvnorm = cx23885_video_template.current_norm; + + /* init video dma queues */ + INIT_LIST_HEAD(&dev->vidq.active); + INIT_LIST_HEAD(&dev->vidq.queued); + dev->vidq.timeout.function = cx23885_vid_timeout; + dev->vidq.timeout.data = (unsigned long)dev; + init_timer(&dev->vidq.timeout); + cx23885_risc_stopper(dev->pci, &dev->vidq.stopper, + VID_A_DMA_CTL, 0x11, 0x00); + + cx_set(PCI_INT_MSK, 1); + + + /* register v4l devices */ + dev->video_dev = cx23885_vdev_init(dev, dev->pci, + &cx23885_video_template, "video"); + err = video_register_device(dev->video_dev, VFL_TYPE_GRABBER, + video_nr[dev->nr]); + if (err < 0) { + printk(KERN_INFO "%s: can't register video device\n", + dev->name); + goto fail_unreg; + } + printk(KERN_INFO "%s/0: registered device video%d [v4l2]\n", + dev->name, dev->video_dev->minor & 0x1f); + /* initial device configuration */ + mutex_lock(&dev->lock); + cx23885_set_tvnorm(dev, dev->tvnorm); + init_controls(dev); + cx23885_video_mux(dev, 0); + mutex_unlock(&dev->lock); + + /* FIXME start tvaudio thread */ + + return 0; + +fail_unreg: + cx23885_video_unregister(dev); + return err; +} + -- cgit v1.2.3-59-g8ed1b From 21a78091921915cd1afd0edb2940dd726edefe9b Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 10 Jan 2008 04:38:59 -0300 Subject: V4L/DVB (7010): cx23885: Small cleanup cx23885: Small cleanup Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/cx23885-video.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c index 8eaebdb76b1e..40d5e778aa25 100644 --- a/drivers/media/video/cx23885/cx23885-video.c +++ b/drivers/media/video/cx23885/cx23885-video.c @@ -288,7 +288,7 @@ void cx23885_video_wakeup(struct cx23885_dev *dev, mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); } if (bc != 1) - printk(KERN_WARN "%s: %d buffers handled (should be 1)\n", + printk(KERN_ERR "%s: %d buffers handled (should be 1)\n", __FUNCTION__, bc); } -- cgit v1.2.3-59-g8ed1b From a19602f26a24c32e491108b49790b106a6351f24 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 10 Jan 2008 11:43:18 -0300 Subject: V4L/DVB (7011): cx23885: Cleanup of compiler defines and warnings Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/cx23885-video.c | 128 +++------------------------- 1 file changed, 13 insertions(+), 115 deletions(-) diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c index 40d5e778aa25..44c809474ba1 100644 --- a/drivers/media/video/cx23885/cx23885-video.c +++ b/drivers/media/video/cx23885/cx23885-video.c @@ -270,11 +270,13 @@ void cx23885_video_wakeup(struct cx23885_dev *dev, break; buf = list_entry(q->active.next, struct cx23885_buffer, vb.queue); + /* count comes from the hw and is is 16bit wide -- * this trick handles wrap-arounds correctly for * up to 32767 buffers in flight... */ if ((s16) (count - buf->count) < 0) break; + do_gettimeofday(&buf->vb.ts); dprintk(2, "[%p/%d] wakeup reg=%d buf=%d\n", buf, buf->vb.i, count, buf->count); @@ -301,7 +303,6 @@ int cx23885_set_tvnorm(struct cx23885_dev *dev, v4l2_std_id norm) dev->tvnorm = norm; - /* Tell the analog tuner/demods */ cx23885_call_i2c_clients(&dev->i2c_bus[1], VIDIOC_S_STD, &norm); @@ -455,20 +456,6 @@ static int cx23885_start_video_dma(struct cx23885_dev *dev, return 0; } -#ifdef CONFIG_PM -static int cx23885_stop_video_dma(struct cx23885_dev *dev) -{ - dprintk(1, "%s()\n", __FUNCTION__); - /* stop dma */ - cx_clear(VID_A_DMA_CTL, 0x11); - - /* disable irqs */ - cx_clear(PCI_INT_MSK, 0x000001); - cx_clear(VID_A_INT_MSK, 0x000011); - - return 0; -} -#endif static int cx23885_restart_video_queue(struct cx23885_dev *dev, struct cx23885_dmaqueue *q) @@ -877,6 +864,10 @@ static int video_release(struct inode *inode, struct file *file) file->private_data = NULL; kfree(fh); + /* We are not putting the tuner to sleep here on exit, because + * we want to use the mpeg encoder in another session to capture + * tuner video. Closing this will result in no video to the encoder. + */ return 0; } @@ -1337,6 +1328,9 @@ static int vidioc_g_register(struct file *file, void *fh, { struct cx23885_dev *dev = ((struct cx23885_fh *)fh)->dev; + if (!v4l2_chip_match_host(reg->match_type, reg->match_chip)) + return -EINVAL; + cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_DBG_G_REGISTER, reg); return 0; @@ -1347,108 +1341,14 @@ static int vidioc_s_register(struct file *file, void *fh, { struct cx23885_dev *dev = ((struct cx23885_fh *)fh)->dev; - cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_DBG_S_REGISTER, reg); - return 0; -} -#endif - -/* ----------------------------------------------------------- */ -/* RADIO ESPECIFIC IOCTLS */ -/* ----------------------------------------------------------- */ - -static int radio_querycap(struct file *file, void *priv, - struct v4l2_capability *cap) -{ - struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; - - strcpy(cap->driver, "cx23885"); - strlcpy(cap->card, cx23885_boards[dev->board].name, - sizeof(cap->card)); - sprintf(cap->bus_info, "PCIe:%s", pci_name(dev->pci)); - cap->version = CX23885_VERSION_CODE; - cap->capabilities = V4L2_CAP_TUNER; - return 0; -} - -static int radio_g_tuner(struct file *file, void *priv, - struct v4l2_tuner *t) -{ - struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; - - if (unlikely(t->index > 0)) - return -EINVAL; - - strcpy(t->name, "Radio"); - t->type = V4L2_TUNER_RADIO; - - cx23885_call_i2c_clients(&dev->i2c_bus[1], VIDIOC_G_TUNER, t); - return 0; -} - -static int radio_enum_input(struct file *file, void *priv, - struct v4l2_input *i) -{ - if (i->index != 0) - return -EINVAL; - strcpy(i->name, "Radio"); - i->type = V4L2_INPUT_TYPE_TUNER; - - return 0; -} - -static int radio_g_audio(struct file *file, void *priv, struct v4l2_audio *a) -{ - if (unlikely(a->index)) - return -EINVAL; - - memset(a, 0, sizeof(*a)); - strcpy(a->name, "Radio"); - return 0; -} - -/* FIXME: Should add a standard for radio */ - -static int radio_s_tuner(struct file *file, void *priv, - struct v4l2_tuner *t) -{ - struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; - - if (0 != t->index) + if (!v4l2_chip_match_host(reg->match_type, reg->match_chip)) return -EINVAL; - cx23885_call_i2c_clients(&dev->i2c_bus[1], VIDIOC_S_TUNER, t); - - return 0; -} - -static int radio_s_audio(struct file *file, void *fh, - struct v4l2_audio *a) -{ - return 0; -} - -static int radio_s_input(struct file *file, void *fh, unsigned int i) -{ - return 0; -} - -static int radio_queryctrl(struct file *file, void *priv, - struct v4l2_queryctrl *c) -{ - int i; + cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_DBG_S_REGISTER, reg); - if (c->id < V4L2_CID_BASE || - c->id >= V4L2_CID_LASTP1) - return -EINVAL; - if (c->id == V4L2_CID_AUDIO_MUTE) { - for (i = 0; i < CX23885_CTLS; i++) - if (cx23885_ctls[i].v.id == c->id) - break; - *c = cx23885_ctls[i].v; - } else - *c = no_ctl; return 0; } +#endif /* ----------------------------------------------------------- */ @@ -1517,7 +1417,6 @@ int cx23885_video_irq(struct cx23885_dev *dev, u32 status) return handled; } - /* ----------------------------------------------------------- */ /* exported stuff */ @@ -1625,6 +1524,7 @@ int cx23885_video_register(struct cx23885_dev *dev) cx23885_risc_stopper(dev->pci, &dev->vidq.stopper, VID_A_DMA_CTL, 0x11, 0x00); + /* Don't enable VBI yet */ cx_set(PCI_INT_MSK, 1); @@ -1647,8 +1547,6 @@ int cx23885_video_register(struct cx23885_dev *dev) cx23885_video_mux(dev, 0); mutex_unlock(&dev->lock); - /* FIXME start tvaudio thread */ - return 0; fail_unreg: -- cgit v1.2.3-59-g8ed1b From d685a483b8c92e3d0580b6c28e2ed531391c8c46 Mon Sep 17 00:00:00 2001 From: "Brett T. Warden" Date: Thu, 10 Jan 2008 04:33:31 -0300 Subject: V4L/DVB (7013): bw-qcam: add module parameter 'force_init' to skip polite auto-detection prior to direct initialization Setting force_init=1 bypasses the friendly auto-detection by polling the status register, and instead attempts to initialize the qcam directly. Not friendly to other parallel devices, but much more reliable than the auto-detection. Signed-off-by: Brett T. Warden Signed-off-by: Andrew Morton Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bw-qcam.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c index 58423525591f..032265383df2 100644 --- a/drivers/media/video/bw-qcam.c +++ b/drivers/media/video/bw-qcam.c @@ -82,11 +82,16 @@ OTHER DEALINGS IN THE SOFTWARE. static unsigned int maxpoll=250; /* Maximum busy-loop count for qcam I/O */ static unsigned int yieldlines=4; /* Yield after this many during capture */ static int video_nr = -1; +static unsigned int force_init; /* Whether to probe aggressively */ module_param(maxpoll, int, 0); module_param(yieldlines, int, 0); module_param(video_nr, int, 0); +/* Set force_init=1 to avoid detection by polling status register and + * immediately attempt to initialize qcam */ +module_param(force_init, int, 0); + static inline int read_lpstatus(struct qcam_device *q) { return parport_read_status(q->pport); @@ -331,6 +336,9 @@ static int qc_detect(struct qcam_device *q) int count = 0; int i; + if (force_init) + return 1; + lastreg = reg = read_lpstatus(q) & 0xf0; for (i = 0; i < 500; i++) @@ -354,12 +362,12 @@ static int qc_detect(struct qcam_device *q) /* Be (even more) liberal in what you accept... */ -/* if (count > 30 && count < 200) */ if (count > 20 && count < 400) { return 1; /* found */ } else { printk(KERN_ERR "No Quickcam found on port %s\n", q->pport->name); + printk(KERN_DEBUG "Quickcam detection counter: %u\n", count); return 0; /* not found */ } } -- cgit v1.2.3-59-g8ed1b From 4513fc696e273d64ea32f2366748aed810316ecc Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Sat, 12 Jan 2008 11:36:36 -0300 Subject: V4L/DVB (7014): cx23885: dprintk macro cleanup Added missing do { } while (0) Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/cx23885-core.c | 8 +++++--- drivers/media/video/cx23885/cx23885-dvb.c | 8 +++++--- drivers/media/video/cx23885/cx23885-i2c.c | 8 ++++---- drivers/media/video/cx23885/cx23885-vbi.c | 8 +++++--- drivers/media/video/cx23885/cx23885-video.c | 9 +++++---- 5 files changed, 24 insertions(+), 17 deletions(-) diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c index e1b06d79e9b1..8e40c7bcc06d 100644 --- a/drivers/media/video/cx23885/cx23885-core.c +++ b/drivers/media/video/cx23885/cx23885-core.c @@ -36,7 +36,7 @@ MODULE_DESCRIPTION("Driver for cx23885 based TV cards"); MODULE_AUTHOR("Steven Toth "); MODULE_LICENSE("GPL"); -static unsigned int debug = 0; +static unsigned int debug; module_param(debug,int,0644); MODULE_PARM_DESC(debug,"enable debug messages"); @@ -44,8 +44,10 @@ static unsigned int card[] = {[0 ... (CX23885_MAXBOARDS - 1)] = UNSET }; module_param_array(card, int, NULL, 0444); MODULE_PARM_DESC(card,"card type"); -#define dprintk(level,fmt, arg...) if (debug >= level) \ - printk(KERN_DEBUG "%s/0: " fmt, dev->name , ## arg) +#define dprintk(level, fmt, arg...)\ + do { if (debug >= level)\ + printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg);\ + } while (0) static unsigned int cx23885_devcount; diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 1b669ee962d0..34910368049e 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -40,10 +40,12 @@ #include "tuner-xc2028.h" #include "tuner-xc2028-types.h" -static unsigned int debug = 0; +static unsigned int debug; -#define dprintk(level,fmt, arg...) if (debug >= level) \ - printk(KERN_DEBUG "%s: " fmt, dev->name, ## arg) +#define dprintk(level, fmt, arg...)\ + do { if (debug >= level)\ + printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg);\ + } while (0) /* ------------------------------------------------------------------ */ diff --git a/drivers/media/video/cx23885/cx23885-i2c.c b/drivers/media/video/cx23885/cx23885-i2c.c index fbc4a57a236b..92fe0bd37c84 100644 --- a/drivers/media/video/cx23885/cx23885-i2c.c +++ b/drivers/media/video/cx23885/cx23885-i2c.c @@ -29,7 +29,7 @@ #include -static unsigned int i2c_debug = 0; +static unsigned int i2c_debug; module_param(i2c_debug, int, 0644); MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]"); @@ -37,9 +37,9 @@ static unsigned int i2c_scan = 0; module_param(i2c_scan, int, 0444); MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time"); -#define dprintk(level, fmt, arg...) do { \ - if (i2c_debug >= level) \ - printk(KERN_DEBUG "%s: " fmt, dev->name , ## arg); \ +#define dprintk(level, fmt, arg...)\ + do { if (i2c_debug >= level)\ + printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg);\ } while (0) #define I2C_WAIT_DELAY 32 diff --git a/drivers/media/video/cx23885/cx23885-vbi.c b/drivers/media/video/cx23885/cx23885-vbi.c index 32ec9d5bdbd0..e36e3fcae2fb 100644 --- a/drivers/media/video/cx23885/cx23885-vbi.c +++ b/drivers/media/video/cx23885/cx23885-vbi.c @@ -31,12 +31,14 @@ static unsigned int vbibufs = 4; module_param(vbibufs, int, 0644); MODULE_PARM_DESC(vbibufs, "number of vbi buffers, range 2-32"); -static unsigned int vbi_debug = 0; +static unsigned int vbi_debug; module_param(vbi_debug, int, 0644); MODULE_PARM_DESC(vbi_debug, "enable debug messages [vbi]"); -#define dprintk(level, fmt, arg...) if (vbi_debug >= level) \ - printk(KERN_DEBUG "%s: " fmt, dev->name , ## arg) +#define dprintk(level, fmt, arg...)\ + do { if (vbi_debug >= level)\ + printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg);\ + } while (0) /* ------------------------------------------------------------------ */ diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c index 44c809474ba1..d3c4d2c5cbe0 100644 --- a/drivers/media/video/cx23885/cx23885-video.c +++ b/drivers/media/video/cx23885/cx23885-video.c @@ -57,11 +57,11 @@ MODULE_PARM_DESC(video_nr, "video device numbers"); MODULE_PARM_DESC(vbi_nr, "vbi device numbers"); MODULE_PARM_DESC(radio_nr, "radio device numbers"); -static unsigned int video_debug = 0; +static unsigned int video_debug; module_param(video_debug, int, 0644); MODULE_PARM_DESC(video_debug, "enable debug messages [video]"); -static unsigned int irq_debug = 0; +static unsigned int irq_debug; module_param(irq_debug, int, 0644); MODULE_PARM_DESC(irq_debug, "enable debug messages [IRQ handler]"); @@ -70,8 +70,9 @@ module_param(vid_limit, int, 0644); MODULE_PARM_DESC(vid_limit, "capture memory limit in megabytes"); #define dprintk(level, fmt, arg...)\ - if (video_debug >= level)\ - printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg) + do { if (video_debug >= level)\ + printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg);\ + } while (0) /* ------------------------------------------------------------------- */ /* static data */ -- cgit v1.2.3-59-g8ed1b From a28cb828ef9ba6669be738dd9affbaba65cc07fb Mon Sep 17 00:00:00 2001 From: Hermann Pitton Date: Sat, 12 Jan 2008 14:31:03 -0300 Subject: V4L/DVB (7016): saa7134: remove the Avermedia Super 007 from eeprom detection saa7134: remove the Avermedia Super 007 from eeprom detection The card made it into the Philips' Tigers eeprom detection and falls through. Since it has attracted already others to follow, which are wrongly identified as TIGER_S then, move it to the usual analog initialization. Signed-off-by: Hermann Pitton Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-cards.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 0e3d2a739326..4a5a1459f025 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -5197,7 +5197,6 @@ int saa7134_board_init2(struct saa7134_dev *dev) break; case SAA7134_BOARD_PHILIPS_TIGER: case SAA7134_BOARD_PHILIPS_TIGER_S: - case SAA7134_BOARD_AVERMEDIA_SUPER_007: { u8 data[] = { 0x3c, 0x33, 0x60}; struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)}; @@ -5227,6 +5226,7 @@ int saa7134_board_init2(struct saa7134_dev *dev) case SAA7134_BOARD_ASUSTeK_P7131_DUAL: case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA: case SAA7134_BOARD_MEDION_MD8800_QUADRO: + case SAA7134_BOARD_AVERMEDIA_SUPER_007: /* this is a hybrid board, initialize to analog mode * and configure firmware eeprom address */ -- cgit v1.2.3-59-g8ed1b From b6667e5fb8c478e65768fdb18fa6576ac1634068 Mon Sep 17 00:00:00 2001 From: Hermann Pitton Date: Sat, 12 Jan 2008 14:43:48 -0300 Subject: V4L/DVB (7017): saa7134: add MSI TV@nywhere Plus with the older tda8275 tuner Thanks go to Mark Schultz for the initial contribution and to Dean Hilkewich for testing it again. Signed-off-by: Hermann Pitton Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.saa7134 | 2 +- drivers/media/video/saa7134/saa7134-cards.c | 8 +++++++- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index fe8514e06d26..5d3b6b4d2515 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -80,7 +80,7 @@ 79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B) 80 -> ASUS Digimatrix TV [1043:0210] 81 -> Philips Tiger reference design [1131:2018] - 82 -> MSI TV@Anywhere plus [1462:6231] + 82 -> MSI TV@Anywhere plus [1462:6231,1462:8624] 83 -> Terratec Cinergy 250 PCI TV [153b:1160] 84 -> LifeView FlyDVB Trio [5168:0319] 85 -> AverTV DVB-T 777 [1461:2c05,1461:2c05] diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 4a5a1459f025..7d7f383b404f 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -4392,7 +4392,13 @@ struct pci_device_id saa7134_pci_tbl[] = { .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7133, .subvendor = 0x1462, - .subdevice = 0x6231, + .subdevice = 0x6231, /* tda8275a, ks003 IR */ + .driver_data = SAA7134_BOARD_MSI_TVATANYWHERE_PLUS, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x1462, + .subdevice = 0x8624, /* tda8275, ks003 IR */ .driver_data = SAA7134_BOARD_MSI_TVATANYWHERE_PLUS, },{ .vendor = PCI_VENDOR_ID_PHILIPS, -- cgit v1.2.3-59-g8ed1b From ec16dae5453eafd1586f35c4ec1ef854e5a808e0 Mon Sep 17 00:00:00 2001 From: Jaime Velasco Juan Date: Sat, 12 Jan 2008 06:48:14 -0300 Subject: V4L/DVB (7019): V4L: add support for Syntek DC1125 webcams This driver supports cameras with USB ID 174f:a311 or 05e1:0501, and the ov965x sensors. These devices are found in some Asus laptops and probably somewhere else. It is based on the stk11xx driver written by Nicolas Vivien Signed-off-by: Jaime Velasco Juan Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/Kconfig | 13 + drivers/media/video/Makefile | 3 + drivers/media/video/stk-sensor.c | 578 +++++++++++++++ drivers/media/video/stk-webcam.c | 1465 ++++++++++++++++++++++++++++++++++++++ drivers/media/video/stk-webcam.h | 138 ++++ 5 files changed, 2197 insertions(+) create mode 100644 drivers/media/video/stk-sensor.c create mode 100644 drivers/media/video/stk-webcam.c create mode 100644 drivers/media/video/stk-webcam.h diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 7431f6da5cae..a2e8987a6195 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -821,6 +821,19 @@ config USB_ZR364XX To compile this driver as a module, choose M here: the module will be called zr364xx. +config USB_STKWEBCAM + tristate "USB Syntek DC1125 Camera support" + depends on VIDEO_V4L2 && EXPERIMENTAL + ---help--- + Say Y here if you want to use this type of camera. + Supported devices are typically found in some Asus laptops, + with USB id 174f:a311 and 05e1:0501. Other Syntek cameras + may be supported by the stk11xx driver, from which this is + derived, see http://stk11xx.sourceforge.net + + To compile this driver as a module, choose M here: the + module will be called stkwebcam. + endif # V4L_USB_DRIVERS endif # VIDEO_CAPTURE_DRIVERS diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 74a2a1c45fe3..28ddd146c1c5 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -8,6 +8,8 @@ tuner-objs := tuner-core.o tuner-types.o msp3400-objs := msp3400-driver.o msp3400-kthreads.o +stkwebcam-objs := stk-webcam.o stk-sensor.o + obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o compat_ioctl32.o \ v4l2-int-device.o @@ -116,6 +118,7 @@ obj-$(CONFIG_USB_SE401) += se401.o obj-$(CONFIG_USB_STV680) += stv680.o obj-$(CONFIG_USB_W9968CF) += w9968cf.o obj-$(CONFIG_USB_ZR364XX) += zr364xx.o +obj-$(CONFIG_USB_STKWEBCAM) += stkwebcam.o obj-$(CONFIG_USB_SN9C102) += sn9c102/ obj-$(CONFIG_USB_ET61X251) += et61x251/ diff --git a/drivers/media/video/stk-sensor.c b/drivers/media/video/stk-sensor.c new file mode 100644 index 000000000000..4a9a0b62efa3 --- /dev/null +++ b/drivers/media/video/stk-sensor.c @@ -0,0 +1,578 @@ +/* stk-sensor.c: Driver for ov96xx sensor (used in some Syntek webcams) + * + * Copyright 2007-2008 Jaime Velasco Juan + * + * Some parts derived from ov7670.c: + * Copyright 2006 One Laptop Per Child Association, Inc. Written + * by Jonathan Corbet with substantial inspiration from Mark + * McClelland's ovcamchip code. + * + * Copyright 2006-7 Jonathan Corbet + * + * This file may be distributed under the terms of the GNU General + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* Controlling the sensor via the STK1125 vendor specific control interface: + * The camera uses an OmniVision sensor and the stk1125 provides an + * SCCB(i2c)-USB bridge which let us program the sensor. + * In my case the sensor id is 0x9652, it can be read from sensor's register + * 0x0A and 0x0B as follows: + * - read register #R: + * output #R to index 0x0208 + * output 0x0070 to index 0x0200 + * input 1 byte from index 0x0201 (some kind of status register) + * until its value is 0x01 + * input 1 byte from index 0x0209. This is the value of #R + * - write value V to register #R + * output #R to index 0x0204 + * output V to index 0x0205 + * output 0x0005 to index 0x0200 + * input 1 byte from index 0x0201 until its value becomes 0x04 + */ + +/* It seems the i2c bus is controlled with these registers */ + +#include "stk-webcam.h" + +#define STK_IIC_BASE (0x0200) +# define STK_IIC_OP (STK_IIC_BASE) +# define STK_IIC_OP_TX (0x05) +# define STK_IIC_OP_RX (0x70) +# define STK_IIC_STAT (STK_IIC_BASE+1) +# define STK_IIC_STAT_TX_OK (0x04) +# define STK_IIC_STAT_RX_OK (0x01) +/* I don't know what does this register. + * when it is 0x00 or 0x01, we cannot talk to the sensor, + * other values work */ +# define STK_IIC_ENABLE (STK_IIC_BASE+2) +# define STK_IIC_ENABLE_NO (0x00) +/* This is what the driver writes in windows */ +# define STK_IIC_ENABLE_YES (0x1e) +/* + * Address of the slave. Seems like the binary driver look for the + * sensor in multiple places, attempting a reset sequence. + * We only know about the ov9650 + */ +# define STK_IIC_ADDR (STK_IIC_BASE+3) +# define STK_IIC_TX_INDEX (STK_IIC_BASE+4) +# define STK_IIC_TX_VALUE (STK_IIC_BASE+5) +# define STK_IIC_RX_INDEX (STK_IIC_BASE+8) +# define STK_IIC_RX_VALUE (STK_IIC_BASE+9) + +#define MAX_RETRIES (50) + +#define SENSOR_ADDRESS (0x60) + +/* From ov7670.c (These registers aren't fully accurate) */ + +/* Registers */ +#define REG_GAIN 0x00 /* Gain lower 8 bits (rest in vref) */ +#define REG_BLUE 0x01 /* blue gain */ +#define REG_RED 0x02 /* red gain */ +#define REG_VREF 0x03 /* Pieces of GAIN, VSTART, VSTOP */ +#define REG_COM1 0x04 /* Control 1 */ +#define COM1_CCIR656 0x40 /* CCIR656 enable */ +#define COM1_QFMT 0x20 /* QVGA/QCIF format */ +#define COM1_SKIP_0 0x00 /* Do not skip any row */ +#define COM1_SKIP_2 0x04 /* Skip 2 rows of 4 */ +#define COM1_SKIP_3 0x08 /* Skip 3 rows of 4 */ +#define REG_BAVE 0x05 /* U/B Average level */ +#define REG_GbAVE 0x06 /* Y/Gb Average level */ +#define REG_AECHH 0x07 /* AEC MS 5 bits */ +#define REG_RAVE 0x08 /* V/R Average level */ +#define REG_COM2 0x09 /* Control 2 */ +#define COM2_SSLEEP 0x10 /* Soft sleep mode */ +#define REG_PID 0x0a /* Product ID MSB */ +#define REG_VER 0x0b /* Product ID LSB */ +#define REG_COM3 0x0c /* Control 3 */ +#define COM3_SWAP 0x40 /* Byte swap */ +#define COM3_SCALEEN 0x08 /* Enable scaling */ +#define COM3_DCWEN 0x04 /* Enable downsamp/crop/window */ +#define REG_COM4 0x0d /* Control 4 */ +#define REG_COM5 0x0e /* All "reserved" */ +#define REG_COM6 0x0f /* Control 6 */ +#define REG_AECH 0x10 /* More bits of AEC value */ +#define REG_CLKRC 0x11 /* Clock control */ +#define CLK_PLL 0x80 /* Enable internal PLL */ +#define CLK_EXT 0x40 /* Use external clock directly */ +#define CLK_SCALE 0x3f /* Mask for internal clock scale */ +#define REG_COM7 0x12 /* Control 7 */ +#define COM7_RESET 0x80 /* Register reset */ +#define COM7_FMT_MASK 0x38 +#define COM7_FMT_SXGA 0x00 +#define COM7_FMT_VGA 0x40 +#define COM7_FMT_CIF 0x20 /* CIF format */ +#define COM7_FMT_QVGA 0x10 /* QVGA format */ +#define COM7_FMT_QCIF 0x08 /* QCIF format */ +#define COM7_RGB 0x04 /* bits 0 and 2 - RGB format */ +#define COM7_YUV 0x00 /* YUV */ +#define COM7_BAYER 0x01 /* Bayer format */ +#define COM7_PBAYER 0x05 /* "Processed bayer" */ +#define REG_COM8 0x13 /* Control 8 */ +#define COM8_FASTAEC 0x80 /* Enable fast AGC/AEC */ +#define COM8_AECSTEP 0x40 /* Unlimited AEC step size */ +#define COM8_BFILT 0x20 /* Band filter enable */ +#define COM8_AGC 0x04 /* Auto gain enable */ +#define COM8_AWB 0x02 /* White balance enable */ +#define COM8_AEC 0x01 /* Auto exposure enable */ +#define REG_COM9 0x14 /* Control 9 - gain ceiling */ +#define REG_COM10 0x15 /* Control 10 */ +#define COM10_HSYNC 0x40 /* HSYNC instead of HREF */ +#define COM10_PCLK_HB 0x20 /* Suppress PCLK on horiz blank */ +#define COM10_HREF_REV 0x08 /* Reverse HREF */ +#define COM10_VS_LEAD 0x04 /* VSYNC on clock leading edge */ +#define COM10_VS_NEG 0x02 /* VSYNC negative */ +#define COM10_HS_NEG 0x01 /* HSYNC negative */ +#define REG_HSTART 0x17 /* Horiz start high bits */ +#define REG_HSTOP 0x18 /* Horiz stop high bits */ +#define REG_VSTART 0x19 /* Vert start high bits */ +#define REG_VSTOP 0x1a /* Vert stop high bits */ +#define REG_PSHFT 0x1b /* Pixel delay after HREF */ +#define REG_MIDH 0x1c /* Manuf. ID high */ +#define REG_MIDL 0x1d /* Manuf. ID low */ +#define REG_MVFP 0x1e /* Mirror / vflip */ +#define MVFP_MIRROR 0x20 /* Mirror image */ +#define MVFP_FLIP 0x10 /* Vertical flip */ + +#define REG_AEW 0x24 /* AGC upper limit */ +#define REG_AEB 0x25 /* AGC lower limit */ +#define REG_VPT 0x26 /* AGC/AEC fast mode op region */ +#define REG_ADVFL 0x2d /* Insert dummy lines (LSB) */ +#define REG_ADVFH 0x2e /* Insert dummy lines (MSB) */ +#define REG_HSYST 0x30 /* HSYNC rising edge delay */ +#define REG_HSYEN 0x31 /* HSYNC falling edge delay */ +#define REG_HREF 0x32 /* HREF pieces */ +#define REG_TSLB 0x3a /* lots of stuff */ +#define TSLB_YLAST 0x04 /* UYVY or VYUY - see com13 */ +#define TSLB_BYTEORD 0x08 /* swap bytes in 16bit mode? */ +#define REG_COM11 0x3b /* Control 11 */ +#define COM11_NIGHT 0x80 /* NIght mode enable */ +#define COM11_NMFR 0x60 /* Two bit NM frame rate */ +#define COM11_HZAUTO 0x10 /* Auto detect 50/60 Hz */ +#define COM11_50HZ 0x08 /* Manual 50Hz select */ +#define COM11_EXP 0x02 +#define REG_COM12 0x3c /* Control 12 */ +#define COM12_HREF 0x80 /* HREF always */ +#define REG_COM13 0x3d /* Control 13 */ +#define COM13_GAMMA 0x80 /* Gamma enable */ +#define COM13_UVSAT 0x40 /* UV saturation auto adjustment */ +#define COM13_CMATRIX 0x10 /* Enable color matrix for RGB or YUV */ +#define COM13_UVSWAP 0x01 /* V before U - w/TSLB */ +#define REG_COM14 0x3e /* Control 14 */ +#define COM14_DCWEN 0x10 /* DCW/PCLK-scale enable */ +#define REG_EDGE 0x3f /* Edge enhancement factor */ +#define REG_COM15 0x40 /* Control 15 */ +#define COM15_R10F0 0x00 /* Data range 10 to F0 */ +#define COM15_R01FE 0x80 /* 01 to FE */ +#define COM15_R00FF 0xc0 /* 00 to FF */ +#define COM15_RGB565 0x10 /* RGB565 output */ +#define COM15_RGBFIXME 0x20 /* FIXME */ +#define COM15_RGB555 0x30 /* RGB555 output */ +#define REG_COM16 0x41 /* Control 16 */ +#define COM16_AWBGAIN 0x08 /* AWB gain enable */ +#define REG_COM17 0x42 /* Control 17 */ +#define COM17_AECWIN 0xc0 /* AEC window - must match COM4 */ +#define COM17_CBAR 0x08 /* DSP Color bar */ + +/* + * This matrix defines how the colors are generated, must be + * tweaked to adjust hue and saturation. + * + * Order: v-red, v-green, v-blue, u-red, u-green, u-blue + * + * They are nine-bit signed quantities, with the sign bit + * stored in 0x58. Sign for v-red is bit 0, and up from there. + */ +#define REG_CMATRIX_BASE 0x4f +#define CMATRIX_LEN 6 +#define REG_CMATRIX_SIGN 0x58 + + +#define REG_BRIGHT 0x55 /* Brightness */ +#define REG_CONTRAS 0x56 /* Contrast control */ + +#define REG_GFIX 0x69 /* Fix gain control */ + +#define REG_RGB444 0x8c /* RGB 444 control */ +#define R444_ENABLE 0x02 /* Turn on RGB444, overrides 5x5 */ +#define R444_RGBX 0x01 /* Empty nibble at end */ + +#define REG_HAECC1 0x9f /* Hist AEC/AGC control 1 */ +#define REG_HAECC2 0xa0 /* Hist AEC/AGC control 2 */ + +#define REG_BD50MAX 0xa5 /* 50hz banding step limit */ +#define REG_HAECC3 0xa6 /* Hist AEC/AGC control 3 */ +#define REG_HAECC4 0xa7 /* Hist AEC/AGC control 4 */ +#define REG_HAECC5 0xa8 /* Hist AEC/AGC control 5 */ +#define REG_HAECC6 0xa9 /* Hist AEC/AGC control 6 */ +#define REG_HAECC7 0xaa /* Hist AEC/AGC control 7 */ +#define REG_BD60MAX 0xab /* 60hz banding step limit */ + + + + +/* Returns 0 if OK */ +int stk_sensor_outb(struct stk_camera *dev, u8 reg, u8 val) +{ + int i = 0; + int tmpval = 0; + + if (stk_camera_write_reg(dev, STK_IIC_TX_INDEX, reg)) + return 1; + if (stk_camera_write_reg(dev, STK_IIC_TX_VALUE, val)) + return 1; + if (stk_camera_write_reg(dev, STK_IIC_OP, STK_IIC_OP_TX)) + return 1; + do { + if (stk_camera_read_reg(dev, STK_IIC_STAT, &tmpval)) + return 1; + i++; + } while (tmpval == 0 && i < MAX_RETRIES); + if (tmpval != STK_IIC_STAT_TX_OK) { + if (tmpval) + STK_ERROR("stk_sensor_outb failed, status=0x%02x\n", + tmpval); + return 1; + } else + return 0; +} + +int stk_sensor_inb(struct stk_camera *dev, u8 reg, u8 *val) +{ + int i = 0; + int tmpval = 0; + + if (stk_camera_write_reg(dev, STK_IIC_RX_INDEX, reg)) + return 1; + if (stk_camera_write_reg(dev, STK_IIC_OP, STK_IIC_OP_RX)) + return 1; + do { + if (stk_camera_read_reg(dev, STK_IIC_STAT, &tmpval)) + return 1; + i++; + } while (tmpval == 0 && i < MAX_RETRIES); + if (tmpval != STK_IIC_STAT_RX_OK) { + if (tmpval) + STK_ERROR("stk_sensor_inb failed, status=0x%02x\n", + tmpval); + return 1; + } + + if (stk_camera_read_reg(dev, STK_IIC_RX_VALUE, &tmpval)) + return 1; + + *val = (u8) tmpval; + return 0; +} + +static int stk_sensor_write_regvals(struct stk_camera *dev, + struct regval *rv) +{ + int ret; + if (rv == NULL) + return 0; + while (rv->reg != 0xff || rv->val != 0xff) { + ret = stk_sensor_outb(dev, rv->reg, rv->val); + if (ret != 0) + return ret; + rv++; + } + return 0; +} + +int stk_sensor_sleep(struct stk_camera *dev) +{ + u8 tmp; + return stk_sensor_inb(dev, REG_COM2, &tmp) + || stk_sensor_outb(dev, REG_COM2, tmp|COM2_SSLEEP); +} + +int stk_sensor_wakeup(struct stk_camera *dev) +{ + u8 tmp; + return stk_sensor_inb(dev, REG_COM2, &tmp) + || stk_sensor_outb(dev, REG_COM2, tmp&~COM2_SSLEEP); +} + +static struct regval ov_initvals[] = { + {REG_CLKRC, CLK_PLL}, + {REG_COM11, 0x01}, + {0x6a, 0x7d}, + {REG_AECH, 0x40}, + {REG_GAIN, 0x00}, + {REG_BLUE, 0x80}, + {REG_RED, 0x80}, + /* Do not enable fast AEC for now */ + /*{REG_COM8, COM8_FASTAEC|COM8_AECSTEP|COM8_BFILT|COM8_AGC|COM8_AEC},*/ + {REG_COM8, COM8_AECSTEP|COM8_BFILT|COM8_AGC|COM8_AEC}, + {0x39, 0x50}, {0x38, 0x93}, + {0x37, 0x00}, {0x35, 0x81}, + {REG_COM5, 0x20}, + {REG_COM1, 0x00}, + {REG_COM3, 0x00}, + {REG_COM4, 0x00}, + {REG_PSHFT, 0x00}, + {0x16, 0x07}, + {0x33, 0xe2}, {0x34, 0xbf}, + {REG_COM16, 0x00}, + {0x96, 0x04}, + /* Gamma curve values */ +/* { 0x7a, 0x20 }, { 0x7b, 0x10 }, + { 0x7c, 0x1e }, { 0x7d, 0x35 }, + { 0x7e, 0x5a }, { 0x7f, 0x69 }, + { 0x80, 0x76 }, { 0x81, 0x80 }, + { 0x82, 0x88 }, { 0x83, 0x8f }, + { 0x84, 0x96 }, { 0x85, 0xa3 }, + { 0x86, 0xaf }, { 0x87, 0xc4 }, + { 0x88, 0xd7 }, { 0x89, 0xe8 }, +*/ + {REG_GFIX, 0x40}, + {0x8e, 0x00}, + {REG_COM12, 0x73}, + {0x8f, 0xdf}, {0x8b, 0x06}, + {0x8c, 0x20}, + {0x94, 0x88}, {0x95, 0x88}, +/* {REG_COM15, 0xc1}, TODO */ + {0x29, 0x3f}, + {REG_COM6, 0x42}, + {REG_BD50MAX, 0x80}, + {REG_HAECC6, 0xb8}, {REG_HAECC7, 0x92}, + {REG_BD60MAX, 0x0a}, + {0x90, 0x00}, {0x91, 0x00}, + {REG_HAECC1, 0x00}, {REG_HAECC2, 0x00}, + {REG_AEW, 0x68}, {REG_AEB, 0x5c}, + {REG_VPT, 0xc3}, + {REG_COM9, 0x2e}, + {0x2a, 0x00}, {0x2b, 0x00}, + + {0xff, 0xff}, /* END MARKER */ +}; + +/* Probe the I2C bus and initialise the sensor chip */ +int stk_sensor_init(struct stk_camera *dev) +{ + u8 idl = 0; + u8 idh = 0; + + if (stk_camera_write_reg(dev, STK_IIC_ENABLE, STK_IIC_ENABLE_YES) + || stk_camera_write_reg(dev, STK_IIC_ADDR, SENSOR_ADDRESS) + || stk_sensor_outb(dev, REG_COM7, COM7_RESET)) { + STK_ERROR("Sensor resetting failed\n"); + return -ENODEV; + } + msleep(10); + /* Read the manufacturer ID: ov = 0x7FA2 */ + if (stk_sensor_inb(dev, REG_MIDH, &idh) + || stk_sensor_inb(dev, REG_MIDL, &idl)) { + STK_ERROR("Strange error reading sensor ID\n"); + return -ENODEV; + } + if (idh != 0x7F || idl != 0xA2) { + STK_ERROR("Huh? you don't have a sensor from ovt\n"); + return -ENODEV; + } + if (stk_sensor_inb(dev, REG_PID, &idh) + || stk_sensor_inb(dev, REG_VER, &idl)) { + STK_ERROR("Could not read sensor model\n"); + return -ENODEV; + } + stk_sensor_write_regvals(dev, ov_initvals); + msleep(10); + STK_INFO("OmniVision sensor detected, id %02X%02X" + " at address %x\n", idh, idl, SENSOR_ADDRESS); + return 0; +} + +/* V4L2_PIX_FMT_UYVY */ +static struct regval ov_fmt_uyvy[] = { + {REG_TSLB, TSLB_YLAST|0x08 }, + { 0x4f, 0x80 }, /* "matrix coefficient 1" */ + { 0x50, 0x80 }, /* "matrix coefficient 2" */ + { 0x51, 0 }, /* vb */ + { 0x52, 0x22 }, /* "matrix coefficient 4" */ + { 0x53, 0x5e }, /* "matrix coefficient 5" */ + { 0x54, 0x80 }, /* "matrix coefficient 6" */ + {REG_COM13, COM13_UVSAT|COM13_CMATRIX}, + {REG_COM15, COM15_R00FF }, + {0xff, 0xff}, /* END MARKER */ +}; + +/* V4L2_PIX_FMT_RGB565X rrrrrggg gggbbbbb */ +static struct regval ov_fmt_rgbr[] = { + { REG_RGB444, 0 }, /* No RGB444 please */ + {REG_TSLB, 0x00}, + { REG_COM1, 0x0 }, + { REG_COM9, 0x38 }, /* 16x gain ceiling; 0x8 is reserved bit */ + { 0x4f, 0xb3 }, /* "matrix coefficient 1" */ + { 0x50, 0xb3 }, /* "matrix coefficient 2" */ + { 0x51, 0 }, /* vb */ + { 0x52, 0x3d }, /* "matrix coefficient 4" */ + { 0x53, 0xa7 }, /* "matrix coefficient 5" */ + { 0x54, 0xe4 }, /* "matrix coefficient 6" */ + { REG_COM13, COM13_GAMMA }, + { REG_COM15, COM15_RGB565|COM15_R00FF }, + { 0xff, 0xff }, +}; + +/* V4L2_PIX_FMT_RGB565 gggbbbbb rrrrrggg */ +static struct regval ov_fmt_rgbp[] = { + { REG_RGB444, 0 }, /* No RGB444 please */ + {REG_TSLB, TSLB_BYTEORD }, + { REG_COM1, 0x0 }, + { REG_COM9, 0x38 }, /* 16x gain ceiling; 0x8 is reserved bit */ + { 0x4f, 0xb3 }, /* "matrix coefficient 1" */ + { 0x50, 0xb3 }, /* "matrix coefficient 2" */ + { 0x51, 0 }, /* vb */ + { 0x52, 0x3d }, /* "matrix coefficient 4" */ + { 0x53, 0xa7 }, /* "matrix coefficient 5" */ + { 0x54, 0xe4 }, /* "matrix coefficient 6" */ + { REG_COM13, COM13_GAMMA }, + { REG_COM15, COM15_RGB565|COM15_R00FF }, + { 0xff, 0xff }, +}; + +/* V4L2_PIX_FMT_SRGGB8 */ +static struct regval ov_fmt_bayer[] = { + /* This changes color order */ + {REG_TSLB, 0x40}, /* BGGR */ + /* {REG_TSLB, 0x08}, */ /* BGGR with vertical image flipping */ + {REG_COM15, COM15_R00FF }, + {0xff, 0xff}, /* END MARKER */ +}; +/* + * Store a set of start/stop values into the camera. + */ +static int stk_sensor_set_hw(struct stk_camera *dev, + int hstart, int hstop, int vstart, int vstop) +{ + int ret; + unsigned char v; +/* + * Horizontal: 11 bits, top 8 live in hstart and hstop. Bottom 3 of + * hstart are in href[2:0], bottom 3 of hstop in href[5:3]. There is + * a mystery "edge offset" value in the top two bits of href. + */ + ret = stk_sensor_outb(dev, REG_HSTART, (hstart >> 3) & 0xff); + ret += stk_sensor_outb(dev, REG_HSTOP, (hstop >> 3) & 0xff); + ret += stk_sensor_inb(dev, REG_HREF, &v); + v = (v & 0xc0) | ((hstop & 0x7) << 3) | (hstart & 0x7); + msleep(10); + ret += stk_sensor_outb(dev, REG_HREF, v); +/* + * Vertical: similar arrangement (note: this is different from ov7670.c) + */ + ret += stk_sensor_outb(dev, REG_VSTART, (vstart >> 3) & 0xff); + ret += stk_sensor_outb(dev, REG_VSTOP, (vstop >> 3) & 0xff); + ret += stk_sensor_inb(dev, REG_VREF, &v); + v = (v & 0xc0) | ((vstop & 0x7) << 3) | (vstart & 0x7); + msleep(10); + ret += stk_sensor_outb(dev, REG_VREF, v); + return ret; +} + + +int stk_sensor_configure(struct stk_camera *dev) +{ + int com7; + /* + * We setup the sensor to output dummy lines in low-res modes, + * so we don't get absurdly hight framerates. + */ + unsigned dummylines; + int flip; + struct regval *rv; + + switch (dev->vsettings.mode) { + case MODE_QCIF: com7 = COM7_FMT_QCIF; + dummylines = 604; + break; + case MODE_QVGA: com7 = COM7_FMT_QVGA; + dummylines = 267; + break; + case MODE_CIF: com7 = COM7_FMT_CIF; + dummylines = 412; + break; + case MODE_VGA: com7 = COM7_FMT_VGA; + dummylines = 11; + break; + case MODE_SXGA: com7 = COM7_FMT_SXGA; + dummylines = 0; + break; + default: STK_ERROR("Unsupported mode %d\n", dev->vsettings.mode); + return -EFAULT; + } + switch (dev->vsettings.palette) { + case V4L2_PIX_FMT_UYVY: + com7 |= COM7_YUV; + rv = ov_fmt_uyvy; + break; + case V4L2_PIX_FMT_RGB565: + com7 |= COM7_RGB; + rv = ov_fmt_rgbp; + break; + case V4L2_PIX_FMT_RGB565X: + com7 |= COM7_RGB; + rv = ov_fmt_rgbr; + break; + case V4L2_PIX_FMT_SBGGR8: + com7 |= COM7_PBAYER; + rv = ov_fmt_bayer; + break; + default: STK_ERROR("Unsupported colorspace\n"); + return -EFAULT; + } + /*FIXME sometimes the sensor go to a bad state + stk_sensor_write_regvals(dev, ov_initvals); */ + stk_sensor_outb(dev, REG_COM7, com7); + msleep(50); + stk_sensor_write_regvals(dev, rv); + flip = (dev->vsettings.vflip?MVFP_FLIP:0) + | (dev->vsettings.hflip?MVFP_MIRROR:0); + stk_sensor_outb(dev, REG_MVFP, flip); + if (dev->vsettings.palette == V4L2_PIX_FMT_SBGGR8 + && !dev->vsettings.vflip) + stk_sensor_outb(dev, REG_TSLB, 0x08); + stk_sensor_outb(dev, REG_ADVFH, dummylines >> 8); + stk_sensor_outb(dev, REG_ADVFL, dummylines & 0xff); + msleep(50); + switch (dev->vsettings.mode) { + case MODE_VGA: + if (stk_sensor_set_hw(dev, 302, 1582, 6, 486)) + STK_ERROR("stk_sensor_set_hw failed (VGA)\n"); + break; + case MODE_SXGA: + case MODE_CIF: + case MODE_QVGA: + case MODE_QCIF: + /*FIXME These settings seem ignored by the sensor + if (stk_sensor_set_hw(dev, 220, 1500, 10, 1034)) + STK_ERROR("stk_sensor_set_hw failed (SXGA)\n"); + */ + break; + } + msleep(10); + return 0; +} + +int stk_sensor_set_brightness(struct stk_camera *dev, int br) +{ + if (br < 0 || br > 0xff) + return -EINVAL; + stk_sensor_outb(dev, REG_AEB, max(0x00, br - 6)); + stk_sensor_outb(dev, REG_AEW, min(0xff, br + 6)); + return 0; +} + diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c new file mode 100644 index 000000000000..f300eca3c473 --- /dev/null +++ b/drivers/media/video/stk-webcam.c @@ -0,0 +1,1465 @@ +/* + * stk-webcam.c : Driver for Syntek 1125 USB webcam controller + * + * Copyright (C) 2006 Nicolas VIVIEN + * Copyright 2007-2008 Jaime Velasco Juan + * + * Some parts are inspired from cafe_ccic.c + * Copyright 2006-2007 Jonathan Corbet + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "stk-webcam.h" + + +static int hflip = 1; +module_param(hflip, bool, 0444); +MODULE_PARM_DESC(hflip, "Horizontal image flip (mirror). Defaults to 1"); + +static int vflip = 1; +module_param(vflip, bool, 0444); +MODULE_PARM_DESC(vflip, "Vertical image flip. Defaults to 1"); + +static int debug; +module_param(debug, int, 0444); +MODULE_PARM_DESC(debug, "Debug v4l ioctls. Defaults to 0"); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jaime Velasco Juan and Nicolas VIVIEN"); +MODULE_DESCRIPTION("Syntek DC1125 webcam driver"); + + + +/* Some cameras have audio interfaces, we aren't interested in those */ +static struct usb_device_id stkwebcam_table[] = { + { USB_DEVICE_AND_INTERFACE_INFO(0x174f, 0xa311, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x05e1, 0x0501, 0xff, 0xff, 0xff) }, + { } +}; +MODULE_DEVICE_TABLE(usb, stkwebcam_table); + +void stk_camera_cleanup(struct kref *kref) +{ + struct stk_camera *dev = to_stk_camera(kref); + + STK_INFO("Syntek USB2.0 Camera release resources" + " video device /dev/video%d\n", dev->vdev.minor); + video_unregister_device(&dev->vdev); + dev->vdev.priv = NULL; + + if (dev->sio_bufs != NULL || dev->isobufs != NULL) + STK_ERROR("We are leaking memory\n"); + usb_put_intf(dev->interface); + kfree(dev); +} + + +/* + * Basic stuff + */ +int stk_camera_write_reg(struct stk_camera *dev, u16 index, u8 value) +{ + struct usb_device *udev = dev->udev; + int ret; + + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x01, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, + index, + NULL, + 0, + 500); + if (ret < 0) + return ret; + else + return 0; +} + +int stk_camera_read_reg(struct stk_camera *dev, u16 index, int *value) +{ + struct usb_device *udev = dev->udev; + int ret; + + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + 0x00, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0x00, + index, + (u8 *) value, + sizeof(u8), + 500); + if (ret < 0) + return ret; + else + return 0; +} + +static int stk_start_stream(struct stk_camera *dev) +{ + int value; + int i, ret; + int value_116, value_117; + + if (!is_present(dev)) + return -ENODEV; + if (!is_memallocd(dev) || !is_initialised(dev)) { + STK_ERROR("FIXME: Buffers are not allocated\n"); + return -EFAULT; + } + ret = usb_set_interface(dev->udev, 0, 5); + + if (ret < 0) + STK_ERROR("usb_set_interface failed !\n"); + if (stk_sensor_wakeup(dev)) + STK_ERROR("error awaking the sensor\n"); + + stk_camera_read_reg(dev, 0x0116, &value_116); + stk_camera_read_reg(dev, 0x0117, &value_117); + + stk_camera_write_reg(dev, 0x0116, 0x0000); + stk_camera_write_reg(dev, 0x0117, 0x0000); + + stk_camera_read_reg(dev, 0x0100, &value); + stk_camera_write_reg(dev, 0x0100, value | 0x80); + + stk_camera_write_reg(dev, 0x0116, value_116); + stk_camera_write_reg(dev, 0x0117, value_117); + for (i = 0; i < MAX_ISO_BUFS; i++) { + if (dev->isobufs[i].urb) { + ret = usb_submit_urb(dev->isobufs[i].urb, GFP_KERNEL); + atomic_inc(&dev->urbs_used); + if (ret) + return ret; + } + } + set_streaming(dev); + return 0; +} + +static int stk_stop_stream(struct stk_camera *dev) +{ + int value; + int i; + if (is_present(dev)) { + stk_camera_read_reg(dev, 0x0100, &value); + stk_camera_write_reg(dev, 0x0100, value & ~0x80); + if (dev->isobufs != NULL) { + for (i = 0; i < MAX_ISO_BUFS; i++) { + if (dev->isobufs[i].urb) + usb_kill_urb(dev->isobufs[i].urb); + } + } + unset_streaming(dev); + + if (usb_set_interface(dev->udev, 0, 0)) + STK_ERROR("usb_set_interface failed !\n"); + if (stk_sensor_sleep(dev)) + STK_ERROR("error suspending the sensor\n"); + } + return 0; +} + +/* + * This seems to be the shortest init sequence we + * must do in order to find the sensor + * Bit 5 of reg. 0x0000 here is important, when reset to 0 the sensor + * is also reset. Maybe powers down it? + * Rest of values don't make a difference + */ + +static struct regval stk1125_initvals[] = { + /*TODO: What means this sequence? */ + {0x0000, 0x24}, + {0x0100, 0x21}, + {0x0002, 0x68}, + {0x0003, 0x80}, + {0x0005, 0x00}, + {0x0007, 0x03}, + {0x000d, 0x00}, + {0x000f, 0x02}, + {0x0300, 0x12}, + {0x0350, 0x41}, + {0x0351, 0x00}, + {0x0352, 0x00}, + {0x0353, 0x00}, + {0x0018, 0x10}, + {0x0019, 0x00}, + {0x001b, 0x0e}, + {0x001c, 0x46}, + {0x0300, 0x80}, + {0x001a, 0x04}, + {0x0110, 0x00}, + {0x0111, 0x00}, + {0x0112, 0x00}, + {0x0113, 0x00}, + + {0xffff, 0xff}, +}; + + +static int stk_initialise(struct stk_camera *dev) +{ + struct regval *rv; + int ret; + if (!is_present(dev)) + return -ENODEV; + if (is_initialised(dev)) + return 0; + rv = stk1125_initvals; + while (rv->reg != 0xffff) { + ret = stk_camera_write_reg(dev, rv->reg, rv->val); + if (ret) + return ret; + rv++; + } + if (stk_sensor_init(dev) == 0) { + set_initialised(dev); + return 0; + } else + return -1; +} + +/* sysfs functions */ +/*FIXME cleanup this */ + +static ssize_t show_brightness(struct device *class, + struct device_attribute *attr, char *buf) +{ + struct video_device *vdev = to_video_device(class); + struct stk_camera *dev = vdev_to_camera(vdev); + + return sprintf(buf, "%X\n", dev->vsettings.brightness); +} + +static ssize_t store_brightness(struct device *class, + struct device_attribute *attr, const char *buf, size_t count) +{ + char *endp; + unsigned long value; + int ret; + + struct video_device *vdev = to_video_device(class); + struct stk_camera *dev = vdev_to_camera(vdev); + + value = simple_strtoul(buf, &endp, 16); + + dev->vsettings.brightness = (int) value; + + ret = stk_sensor_set_brightness(dev, value >> 8); + if (ret) + return ret; + else + return count; +} + +static ssize_t show_hflip(struct device *class, + struct device_attribute *attr, char *buf) +{ + struct video_device *vdev = to_video_device(class); + struct stk_camera *dev = vdev_to_camera(vdev); + + return sprintf(buf, "%d\n", dev->vsettings.hflip); +} + +static ssize_t store_hflip(struct device *class, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct video_device *vdev = to_video_device(class); + struct stk_camera *dev = vdev_to_camera(vdev); + + if (strncmp(buf, "1", 1) == 0) + dev->vsettings.hflip = 1; + else if (strncmp(buf, "0", 1) == 0) + dev->vsettings.hflip = 0; + else + return -EINVAL; + + return strlen(buf); +} + +static ssize_t show_vflip(struct device *class, + struct device_attribute *attr, char *buf) +{ + struct video_device *vdev = to_video_device(class); + struct stk_camera *dev = vdev_to_camera(vdev); + + return sprintf(buf, "%d\n", dev->vsettings.vflip); +} + +static ssize_t store_vflip(struct device *class, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct video_device *vdev = to_video_device(class); + struct stk_camera *dev = vdev_to_camera(vdev); + + if (strncmp(buf, "1", 1) == 0) + dev->vsettings.vflip = 1; + else if (strncmp(buf, "0", 1) == 0) + dev->vsettings.vflip = 0; + else + return -EINVAL; + + return strlen(buf); +} + +static DEVICE_ATTR(brightness, S_IRUGO | S_IWUGO, + show_brightness, store_brightness); +static DEVICE_ATTR(hflip, S_IRUGO | S_IWUGO, show_hflip, store_hflip); +static DEVICE_ATTR(vflip, S_IRUGO | S_IWUGO, show_vflip, store_vflip); + +static int stk_create_sysfs_files(struct video_device *vdev) +{ + int ret; + + ret = video_device_create_file(vdev, &dev_attr_brightness); + ret += video_device_create_file(vdev, &dev_attr_hflip); + ret += video_device_create_file(vdev, &dev_attr_vflip); + return ret; +} + +static void stk_remove_sysfs_files(struct video_device *vdev) +{ + video_device_remove_file(vdev, &dev_attr_brightness); + video_device_remove_file(vdev, &dev_attr_hflip); + video_device_remove_file(vdev, &dev_attr_vflip); +} + + +/* *********************************************** */ +/* + * This function is called as an URB transfert is complete (Isochronous pipe). + * So, the traitement is done in interrupt time, so it has be fast, not crash, + * and not stall. Neat. + */ +static void stk_isoc_handler(struct urb *urb) +{ + int i; + int ret; + int framelen; + unsigned long flags; + + unsigned char *fill = NULL; + unsigned char *iso_buf = NULL; + + struct stk_camera *dev; + struct stk_sio_buffer *fb; + + dev = (struct stk_camera *) urb->context; + + if (dev == NULL) { + STK_ERROR("isoc_handler called with NULL device !\n"); + return; + } + + if (urb->status == -ENOENT || urb->status == -ECONNRESET + || urb->status == -ESHUTDOWN) { + atomic_dec(&dev->urbs_used); + return; + } + + spin_lock_irqsave(&dev->spinlock, flags); + + if (urb->status != -EINPROGRESS && urb->status != 0) { + STK_ERROR("isoc_handler: urb->status == %d\n", urb->status); + goto resubmit; + } + + if (list_empty(&dev->sio_avail)) { + /*FIXME Stop streaming after a while */ + (void) (printk_ratelimit() && + STK_ERROR("isoc_handler without available buffer!\n")); + goto resubmit; + } + fb = list_first_entry(&dev->sio_avail, + struct stk_sio_buffer, list); + fill = fb->buffer + fb->v4lbuf.bytesused; + + for (i = 0; i < urb->number_of_packets; i++) { + if (urb->iso_frame_desc[i].status != 0) { + if (urb->iso_frame_desc[i].status != -EXDEV) + STK_ERROR("Frame %d has error %d\n", i, + urb->iso_frame_desc[i].status); + continue; + } + framelen = urb->iso_frame_desc[i].actual_length; + iso_buf = urb->transfer_buffer + urb->iso_frame_desc[i].offset; + + if (framelen <= 4) + continue; /* no data */ + + /* + * we found something informational from there + * the isoc frames have to type of headers + * type1: 00 xx 00 00 or 20 xx 00 00 + * type2: 80 xx 00 00 00 00 00 00 or a0 xx 00 00 00 00 00 00 + * xx is a sequencer which has never been seen over 0x3f + * imho data written down looks like bayer, i see similarities + * after every 640 bytes + */ + if (*iso_buf & 0x80) { + framelen -= 8; + iso_buf += 8; + /* This marks a new frame */ + if (fb->v4lbuf.bytesused != 0 + && fb->v4lbuf.bytesused != dev->frame_size) { + (void) (printk_ratelimit() && + STK_ERROR("frame %d, " + "bytesused=%d, skipping\n", + i, fb->v4lbuf.bytesused)); + fb->v4lbuf.bytesused = 0; + fill = fb->buffer; + } else if (fb->v4lbuf.bytesused == dev->frame_size) { + list_move_tail(dev->sio_avail.next, + &dev->sio_full); + wake_up(&dev->wait_frame); + if (list_empty(&dev->sio_avail)) { + (void) (printk_ratelimit() && + STK_ERROR("No buffer available\n")); + goto resubmit; + } + fb = list_first_entry(&dev->sio_avail, + struct stk_sio_buffer, list); + fb->v4lbuf.bytesused = 0; + fill = fb->buffer; + } + } else { + framelen -= 4; + iso_buf += 4; + } + + /* Our buffer is full !!! */ + if (framelen + fb->v4lbuf.bytesused > dev->frame_size) { + (void) (printk_ratelimit() && + STK_ERROR("Frame buffer overflow, lost sync\n")); + /*FIXME Do something here? */ + continue; + } + spin_unlock_irqrestore(&dev->spinlock, flags); + memcpy(fill, iso_buf, framelen); + spin_lock_irqsave(&dev->spinlock, flags); + fill += framelen; + + /* New size of our buffer */ + fb->v4lbuf.bytesused += framelen; + } + +resubmit: + spin_unlock_irqrestore(&dev->spinlock, flags); + urb->dev = dev->udev; + ret = usb_submit_urb(urb, GFP_ATOMIC); + if (ret != 0) { + STK_ERROR("Error (%d) re-submitting urb in stk_isoc_handler.\n", + ret); + } +} + +/* -------------------------------------------- */ + +static int stk_prepare_iso(struct stk_camera *dev) +{ + void *kbuf; + int i, j; + struct urb *urb; + struct usb_device *udev; + + if (dev == NULL) + return -ENXIO; + udev = dev->udev; + + if (dev->isobufs) + STK_ERROR("isobufs already allocated. Bad\n"); + else + dev->isobufs = kzalloc(MAX_ISO_BUFS * sizeof(*dev->isobufs), + GFP_KERNEL); + if (dev->isobufs == NULL) { + STK_ERROR("Unable to allocate iso buffers\n"); + return -ENOMEM; + } + for (i = 0; i < MAX_ISO_BUFS; i++) { + if (dev->isobufs[i].data == NULL) { + kbuf = kzalloc(ISO_BUFFER_SIZE, GFP_KERNEL); + if (kbuf == NULL) { + STK_ERROR("Failed to allocate iso buffer %d\n", + i); + goto isobufs_out; + } + dev->isobufs[i].data = kbuf; + } else + STK_ERROR("isobuf data already allocated\n"); + if (dev->isobufs[i].urb == NULL) { + urb = usb_alloc_urb(ISO_FRAMES_PER_DESC, GFP_KERNEL); + if (urb == NULL) { + STK_ERROR("Failed to allocate URB %d\n", i); + goto isobufs_out; + } + dev->isobufs[i].urb = urb; + } else { + STK_ERROR("Killing URB\n"); + usb_kill_urb(dev->isobufs[i].urb); + urb = dev->isobufs[i].urb; + } + urb->interval = 1; + urb->dev = udev; + urb->pipe = usb_rcvisocpipe(udev, dev->isoc_ep); + urb->transfer_flags = URB_ISO_ASAP; + urb->transfer_buffer = dev->isobufs[i].data; + urb->transfer_buffer_length = ISO_BUFFER_SIZE; + urb->complete = stk_isoc_handler; + urb->context = dev; + urb->start_frame = 0; + urb->number_of_packets = ISO_FRAMES_PER_DESC; + + for (j = 0; j < ISO_FRAMES_PER_DESC; j++) { + urb->iso_frame_desc[j].offset = j * ISO_MAX_FRAME_SIZE; + urb->iso_frame_desc[j].length = ISO_MAX_FRAME_SIZE; + } + } + set_memallocd(dev); + return 0; + +isobufs_out: + for (i = 0; i < MAX_ISO_BUFS && dev->isobufs[i].data; i++) + kfree(dev->isobufs[i].data); + for (i = 0; i < MAX_ISO_BUFS && dev->isobufs[i].urb; i++) + usb_free_urb(dev->isobufs[i].urb); + kfree(dev->isobufs); + dev->isobufs = NULL; + return -ENOMEM; +} + +static void stk_clean_iso(struct stk_camera *dev) +{ + int i; + + if (dev == NULL || dev->isobufs == NULL) + return; + + for (i = 0; i < MAX_ISO_BUFS; i++) { + struct urb *urb; + + urb = dev->isobufs[i].urb; + if (urb) { + if (atomic_read(&dev->urbs_used)) + usb_kill_urb(urb); + usb_free_urb(urb); + } + kfree(dev->isobufs[i].data); + } + kfree(dev->isobufs); + dev->isobufs = NULL; + unset_memallocd(dev); +} + +static int stk_setup_siobuf(struct stk_camera *dev, int index) +{ + struct stk_sio_buffer *buf = dev->sio_bufs + index; + INIT_LIST_HEAD(&buf->list); + buf->v4lbuf.length = PAGE_ALIGN(dev->frame_size); + buf->buffer = vmalloc_user(buf->v4lbuf.length); + if (buf->buffer == NULL) + return -ENOMEM; + buf->mapcount = 0; + buf->dev = dev; + buf->v4lbuf.index = index; + buf->v4lbuf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + buf->v4lbuf.field = V4L2_FIELD_NONE; + buf->v4lbuf.memory = V4L2_MEMORY_MMAP; + buf->v4lbuf.m.offset = 2*index*buf->v4lbuf.length; + return 0; +} + +static int stk_free_sio_buffers(struct stk_camera *dev) +{ + int i; + int nbufs; + unsigned long flags; + if (dev->n_sbufs == 0 || dev->sio_bufs == NULL) + return 0; + /* + * If any buffers are mapped, we cannot free them at all. + */ + for (i = 0; i < dev->n_sbufs; i++) { + if (dev->sio_bufs[i].mapcount > 0) + return -EBUSY; + } + /* + * OK, let's do it. + */ + spin_lock_irqsave(&dev->spinlock, flags); + INIT_LIST_HEAD(&dev->sio_avail); + INIT_LIST_HEAD(&dev->sio_full); + nbufs = dev->n_sbufs; + dev->n_sbufs = 0; + spin_unlock_irqrestore(&dev->spinlock, flags); + for (i = 0; i < nbufs; i++) { + if (dev->sio_bufs[i].buffer != NULL) + vfree(dev->sio_bufs[i].buffer); + } + kfree(dev->sio_bufs); + dev->sio_bufs = NULL; + return 0; +} + +static int stk_prepare_sio_buffers(struct stk_camera *dev, unsigned n_sbufs) +{ + int i; + if (dev->sio_bufs != NULL) + STK_ERROR("sio_bufs already allocated\n"); + else { + dev->sio_bufs = kzalloc(n_sbufs * sizeof(struct stk_sio_buffer), + GFP_KERNEL); + if (dev->sio_bufs == NULL) + return -ENOMEM; + for (i = 0; i < n_sbufs; i++) { + if (stk_setup_siobuf(dev, i)) + return (dev->n_sbufs > 1)? 0 : -ENOMEM; + dev->n_sbufs = i+1; + } + } + return 0; +} + +static int stk_allocate_buffers(struct stk_camera *dev, unsigned n_sbufs) +{ + int err; + err = stk_prepare_iso(dev); + if (err) { + stk_clean_iso(dev); + return err; + } + err = stk_prepare_sio_buffers(dev, n_sbufs); + if (err) { + stk_free_sio_buffers(dev); + return err; + } + return 0; +} + +static void stk_free_buffers(struct stk_camera *dev) +{ + stk_clean_iso(dev); + stk_free_sio_buffers(dev); +} +/* -------------------------------------------- */ + +/* v4l file operations */ + +static int v4l_stk_open(struct inode *inode, struct file *fp) +{ + struct stk_camera *dev; + struct video_device *vdev; + + vdev = video_devdata(fp); + dev = vdev_to_camera(vdev); + + if (dev == NULL || !is_present(dev)) + return -ENXIO; + fp->private_data = vdev; + kref_get(&dev->kref); + + return 0; +} + +static int v4l_stk_release(struct inode *inode, struct file *fp) +{ + struct stk_camera *dev; + struct video_device *vdev; + + vdev = video_devdata(fp); + if (vdev == NULL) { + STK_ERROR("v4l_release called w/o video devdata\n"); + return -EFAULT; + } + dev = vdev_to_camera(vdev); + if (dev == NULL) { + STK_ERROR("v4l_release called on removed device\n"); + return -ENODEV; + } + + if (dev->owner != fp) { + kref_put(&dev->kref, stk_camera_cleanup); + return 0; + } + + stk_stop_stream(dev); + + stk_free_buffers(dev); + + dev->owner = NULL; + + kref_put(&dev->kref, stk_camera_cleanup); + + return 0; +} + +static ssize_t v4l_stk_read(struct file *fp, char __user *buf, + size_t count, loff_t *f_pos) +{ + int i; + int ret; + unsigned long flags; + struct stk_camera *dev; + struct video_device *vdev; + struct stk_sio_buffer *sbuf; + + vdev = video_devdata(fp); + if (vdev == NULL) + return -EFAULT; + dev = vdev_to_camera(vdev); + + if (dev == NULL) + return -EIO; + + if (!is_present(dev)) + return -EIO; + if (dev->owner && dev->owner != fp) + return -EBUSY; + dev->owner = fp; + if (!is_streaming(dev)) { + if (stk_initialise(dev) + || stk_allocate_buffers(dev, 3) + || stk_start_stream(dev)) + return -ENOMEM; + spin_lock_irqsave(&dev->spinlock, flags); + for (i = 0; i < dev->n_sbufs; i++) { + list_add_tail(&dev->sio_bufs[i].list, &dev->sio_avail); + dev->sio_bufs[i].v4lbuf.flags = V4L2_BUF_FLAG_QUEUED; + } + spin_unlock_irqrestore(&dev->spinlock, flags); + } + if (*f_pos == 0) { + if (fp->f_flags & O_NONBLOCK && list_empty(&dev->sio_full)) + return -EWOULDBLOCK; + ret = wait_event_interruptible(dev->wait_frame, + !list_empty(&dev->sio_full) || !is_present(dev)); + if (ret) + return ret; + if (!is_present(dev)) + return -EIO; + } + if (count + *f_pos > dev->frame_size) + count = dev->frame_size - *f_pos; + spin_lock_irqsave(&dev->spinlock, flags); + if (list_empty(&dev->sio_full)) { + spin_unlock_irqrestore(&dev->spinlock, flags); + STK_ERROR("BUG: No siobufs ready\n"); + return 0; + } + sbuf = list_first_entry(&dev->sio_full, struct stk_sio_buffer, list); + spin_unlock_irqrestore(&dev->spinlock, flags); + + if (copy_to_user(buf, sbuf->buffer + *f_pos, count)) + return -EFAULT; + + *f_pos += count; + + if (*f_pos >= dev->frame_size) { + *f_pos = 0; + spin_lock_irqsave(&dev->spinlock, flags); + list_move_tail(&sbuf->list, &dev->sio_avail); + spin_unlock_irqrestore(&dev->spinlock, flags); + } + return count; +} + +static unsigned int v4l_stk_poll(struct file *fp, poll_table *wait) +{ + struct stk_camera *dev; + struct video_device *vdev; + + vdev = video_devdata(fp); + + if (vdev == NULL) + return -EFAULT; + + dev = vdev_to_camera(vdev); + if (dev == NULL) + return -ENODEV; + + poll_wait(fp, &dev->wait_frame, wait); + + if (!is_present(dev)) + return POLLERR; + + if (!list_empty(&dev->sio_full)) + return (POLLIN | POLLRDNORM); + + return 0; +} + + +static void stk_v4l_vm_open(struct vm_area_struct *vma) +{ + struct stk_sio_buffer *sbuf = vma->vm_private_data; + sbuf->mapcount++; +} +static void stk_v4l_vm_close(struct vm_area_struct *vma) +{ + struct stk_sio_buffer *sbuf = vma->vm_private_data; + sbuf->mapcount--; + if (sbuf->mapcount == 0) + sbuf->v4lbuf.flags &= ~V4L2_BUF_FLAG_MAPPED; +} +static struct vm_operations_struct stk_v4l_vm_ops = { + .open = stk_v4l_vm_open, + .close = stk_v4l_vm_close +}; + +static int v4l_stk_mmap(struct file *fp, struct vm_area_struct *vma) +{ + unsigned int i; + int ret; + unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; + struct stk_camera *dev; + struct video_device *vdev; + struct stk_sio_buffer *sbuf = NULL; + + if (!(vma->vm_flags & VM_WRITE) || !(vma->vm_flags & VM_SHARED)) + return -EINVAL; + + vdev = video_devdata(fp); + dev = vdev_to_camera(vdev); + + for (i = 0; i < dev->n_sbufs; i++) { + if (dev->sio_bufs[i].v4lbuf.m.offset == offset) { + sbuf = dev->sio_bufs + i; + break; + } + } + if (sbuf == NULL) + return -EINVAL; + ret = remap_vmalloc_range(vma, sbuf->buffer, 0); + if (ret) + return ret; + vma->vm_flags |= VM_DONTEXPAND; + vma->vm_private_data = sbuf; + vma->vm_ops = &stk_v4l_vm_ops; + sbuf->v4lbuf.flags |= V4L2_BUF_FLAG_MAPPED; + stk_v4l_vm_open(vma); + return 0; +} + +/* v4l ioctl handlers */ + +static int stk_vidioc_querycap(struct file *filp, + void *priv, struct v4l2_capability *cap) +{ + strcpy(cap->driver, "stk"); + strcpy(cap->card, "stk"); + cap->version = DRIVER_VERSION_NUM; + + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE + | V4L2_CAP_READWRITE | V4L2_CAP_STREAMING; + return 0; +} + +static int stk_vidioc_enum_input(struct file *filp, + void *priv, struct v4l2_input *input) +{ + if (input->index != 0) + return -EINVAL; + + strcpy(input->name, "Syntek USB Camera"); + input->type = V4L2_INPUT_TYPE_CAMERA; + return 0; +} + + +static int stk_vidioc_g_input(struct file *filp, void *priv, unsigned int *i) +{ + *i = 0; + return 0; +} + +static int stk_vidioc_s_input(struct file *filp, void *priv, unsigned int i) +{ + if (i != 0) + return -EINVAL; + else + return 0; +} + +/* from vivi.c */ +static int stk_vidioc_s_std(struct file *filp, void *priv, v4l2_std_id *a) +{ + return 0; +} + +/* List of all V4Lv2 controls supported by the driver */ +static struct v4l2_queryctrl stk_controls[] = { + { + .id = V4L2_CID_BRIGHTNESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Brightness", + .minimum = 0, + .maximum = 0xffff, + .step = 0x0100, + .default_value = 0x6000, + }, + /*TODO: get more controls to work */ +}; + +static int stk_vidioc_queryctrl(struct file *filp, + void *priv, struct v4l2_queryctrl *c) +{ + int i; + int nbr; + nbr = ARRAY_SIZE(stk_controls); + + for (i = 0; i < nbr; i++) { + if (stk_controls[i].id == c->id) { + memcpy(c, &stk_controls[i], + sizeof(struct v4l2_queryctrl)); + return 0; + } + } + return -EINVAL; +} + +static int stk_vidioc_g_ctrl(struct file *filp, + void *priv, struct v4l2_control *c) +{ + struct stk_camera *dev = priv; + switch (c->id) { + case V4L2_CID_BRIGHTNESS: + c->value = dev->vsettings.brightness; + break; + default: + return -EINVAL; + } + return 0; +} + +static int stk_vidioc_s_ctrl(struct file *filp, + void *priv, struct v4l2_control *c) +{ + struct stk_camera *dev = priv; + switch (c->id) { + case V4L2_CID_BRIGHTNESS: + dev->vsettings.brightness = c->value; + return stk_sensor_set_brightness(dev, c->value >> 8); + default: + return -EINVAL; + } + return 0; +} + + +static int stk_vidioc_enum_fmt_cap(struct file *filp, + void *priv, struct v4l2_fmtdesc *fmtd) +{ + fmtd->flags = 0; + + switch (fmtd->index) { + case 0: + fmtd->pixelformat = V4L2_PIX_FMT_RGB565; + strcpy(fmtd->description, "r5g6b5"); + break; + case 1: + fmtd->pixelformat = V4L2_PIX_FMT_RGB565X; + strcpy(fmtd->description, "r5g6b5BE"); + break; + case 2: + fmtd->pixelformat = V4L2_PIX_FMT_UYVY; + strcpy(fmtd->description, "yuv4:2:2"); + break; + case 3: + fmtd->pixelformat = V4L2_PIX_FMT_SBGGR8; + strcpy(fmtd->description, "Raw bayer"); + break; + default: + return -EINVAL; + } + return 0; +} + +static struct stk_size { + unsigned w; + unsigned h; + enum stk_mode m; +} stk_sizes[] = { + { .w = 1280, .h = 1024, .m = MODE_SXGA, }, + { .w = 640, .h = 480, .m = MODE_VGA, }, + { .w = 352, .h = 288, .m = MODE_CIF, }, + { .w = 320, .h = 240, .m = MODE_QVGA, }, + { .w = 176, .h = 144, .m = MODE_QCIF, }, +}; + +static int stk_vidioc_g_fmt_cap(struct file *filp, + void *priv, struct v4l2_format *f) +{ + struct v4l2_pix_format *pix_format = &f->fmt.pix; + struct stk_camera *dev = priv; + int i; + + for (i = 0; i < ARRAY_SIZE(stk_sizes) + && stk_sizes[i].m != dev->vsettings.mode; + i++); + if (i == ARRAY_SIZE(stk_sizes)) { + STK_ERROR("ERROR: mode invalid\n"); + return -EINVAL; + } + pix_format->width = stk_sizes[i].w; + pix_format->height = stk_sizes[i].h; + pix_format->field = V4L2_FIELD_NONE; + pix_format->colorspace = V4L2_COLORSPACE_SRGB; + pix_format->priv = 0; + pix_format->pixelformat = dev->vsettings.palette; + if (dev->vsettings.palette == V4L2_PIX_FMT_SBGGR8) + pix_format->bytesperline = pix_format->width; + else + pix_format->bytesperline = 2 * pix_format->width; + pix_format->sizeimage = pix_format->bytesperline + * pix_format->height; + return 0; +} + +static int stk_vidioc_try_fmt_cap(struct file *filp, + void *priv, struct v4l2_format *fmtd) +{ + int i; + switch (fmtd->fmt.pix.pixelformat) { + case V4L2_PIX_FMT_RGB565: + case V4L2_PIX_FMT_RGB565X: + case V4L2_PIX_FMT_UYVY: + case V4L2_PIX_FMT_SBGGR8: + break; + default: + return -EINVAL; + } + for (i = 1; i < ARRAY_SIZE(stk_sizes); i++) { + if (fmtd->fmt.pix.width > stk_sizes[i].w) + break; + } + if (i == ARRAY_SIZE(stk_sizes) + || (abs(fmtd->fmt.pix.width - stk_sizes[i-1].w) + < abs(fmtd->fmt.pix.width - stk_sizes[i].w))) { + fmtd->fmt.pix.height = stk_sizes[i-1].h; + fmtd->fmt.pix.width = stk_sizes[i-1].w; + fmtd->fmt.pix.priv = i - 1; + } else { + fmtd->fmt.pix.height = stk_sizes[i].h; + fmtd->fmt.pix.width = stk_sizes[i].w; + fmtd->fmt.pix.priv = i; + } + + fmtd->fmt.pix.field = V4L2_FIELD_NONE; + fmtd->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB; + if (fmtd->fmt.pix.pixelformat == V4L2_PIX_FMT_SBGGR8) + fmtd->fmt.pix.bytesperline = fmtd->fmt.pix.width; + else + fmtd->fmt.pix.bytesperline = 2 * fmtd->fmt.pix.width; + fmtd->fmt.pix.sizeimage = fmtd->fmt.pix.bytesperline + * fmtd->fmt.pix.height; + return 0; +} + +static int stk_vidioc_s_fmt_cap(struct file *filp, + void *priv, struct v4l2_format *fmtd) +{ + int ret; + struct stk_camera *dev = priv; + + if (dev == NULL) + return -ENODEV; + if (!is_present(dev)) + return -ENODEV; + if (is_streaming(dev)) + return -EBUSY; + if (dev->owner && dev->owner != filp) + return -EBUSY; + dev->owner = filp; + ret = stk_vidioc_try_fmt_cap(filp, priv, fmtd); + if (ret) + return ret; + + dev->vsettings.palette = fmtd->fmt.pix.pixelformat; + stk_free_buffers(dev); + dev->frame_size = fmtd->fmt.pix.sizeimage; + dev->vsettings.mode = stk_sizes[fmtd->fmt.pix.priv].m; + + stk_initialise(dev); + /* This registers controls some timings, not sure of what. */ + stk_camera_write_reg(dev, 0x001b, 0x0e); + if (dev->vsettings.mode == MODE_SXGA) + stk_camera_write_reg(dev, 0x001c, 0x0e); + else + stk_camera_write_reg(dev, 0x001c, 0x46); + /* + * Registers 0x0115 0x0114 are the size of each line (bytes), + * regs 0x0117 0x0116 are the heigth of the image. + */ + stk_camera_write_reg(dev, 0x0115, + (fmtd->fmt.pix.bytesperline >> 8) & 0xff); + stk_camera_write_reg(dev, 0x0114, + fmtd->fmt.pix.bytesperline & 0xff); + stk_camera_write_reg(dev, 0x0117, + (fmtd->fmt.pix.height >> 8) & 0xff); + stk_camera_write_reg(dev, 0x0116, + fmtd->fmt.pix.height & 0xff); + return stk_sensor_configure(dev); +} + +static int stk_vidioc_reqbufs(struct file *filp, + void *priv, struct v4l2_requestbuffers *rb) +{ + struct stk_camera *dev = priv; + + if (dev == NULL) + return -ENODEV; + if (rb->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + if (rb->memory != V4L2_MEMORY_MMAP) + return -EINVAL; + if (is_streaming(dev) + || (dev->owner && dev->owner != filp)) + return -EBUSY; + dev->owner = filp; + + /*FIXME If they ask for zero, we must stop streaming and free */ + if (rb->count < 3) + rb->count = 3; + /* Arbitrary limit */ + else if (rb->count > 5) + rb->count = 5; + + stk_allocate_buffers(dev, rb->count); + rb->count = dev->n_sbufs; + return 0; +} + +static int stk_vidioc_querybuf(struct file *filp, + void *priv, struct v4l2_buffer *buf) +{ + int index; + struct stk_camera *dev = priv; + struct stk_sio_buffer *sbuf; + + if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + index = buf->index; + + if (index < 0 || index >= dev->n_sbufs) + return -EINVAL; + sbuf = dev->sio_bufs + buf->index; + *buf = sbuf->v4lbuf; + return 0; +} + +static int stk_vidioc_qbuf(struct file *filp, + void *priv, struct v4l2_buffer *buf) +{ + struct stk_camera *dev = priv; + struct stk_sio_buffer *sbuf; + unsigned long flags; + if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (buf->memory != V4L2_MEMORY_MMAP) + return -EINVAL; + + if (buf->index < 0 || buf->index >= dev->n_sbufs) + return -EINVAL; + sbuf = dev->sio_bufs + buf->index; + if (sbuf->v4lbuf.flags & V4L2_BUF_FLAG_QUEUED) + return 0; + sbuf->v4lbuf.flags |= V4L2_BUF_FLAG_QUEUED; + sbuf->v4lbuf.flags &= ~V4L2_BUF_FLAG_DONE; + spin_lock_irqsave(&dev->spinlock, flags); + list_add_tail(&sbuf->list, &dev->sio_avail); + *buf = sbuf->v4lbuf; + spin_unlock_irqrestore(&dev->spinlock, flags); + return 0; +} + +static int stk_vidioc_dqbuf(struct file *filp, + void *priv, struct v4l2_buffer *buf) +{ + struct stk_camera *dev = priv; + struct stk_sio_buffer *sbuf; + unsigned long flags; + int ret; + + if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE + || !is_streaming(dev)) + return -EINVAL; + + if (filp->f_flags & O_NONBLOCK && list_empty(&dev->sio_full)) + return -EWOULDBLOCK; + ret = wait_event_interruptible(dev->wait_frame, + !list_empty(&dev->sio_full) || !is_present(dev)); + if (ret) + return ret; + if (!is_present(dev)) + return -EIO; + + spin_lock_irqsave(&dev->spinlock, flags); + sbuf = list_first_entry(&dev->sio_full, struct stk_sio_buffer, list); + list_del_init(&sbuf->list); + spin_unlock_irqrestore(&dev->spinlock, flags); + sbuf->v4lbuf.flags &= ~V4L2_BUF_FLAG_QUEUED; + sbuf->v4lbuf.flags |= V4L2_BUF_FLAG_DONE; + sbuf->v4lbuf.sequence = ++dev->sequence; + do_gettimeofday(&sbuf->v4lbuf.timestamp); + + *buf = sbuf->v4lbuf; + return 0; +} + +static int stk_vidioc_streamon(struct file *filp, + void *priv, enum v4l2_buf_type type) +{ + struct stk_camera *dev = priv; + if (is_streaming(dev)) + return 0; + if (dev->sio_bufs == NULL) + return -EINVAL; + dev->sequence = 0; + return stk_start_stream(dev); +} + +static int stk_vidioc_streamoff(struct file *filp, + void *priv, enum v4l2_buf_type type) +{ + struct stk_camera *dev = priv; + unsigned long flags; + int i; + stk_stop_stream(dev); + spin_lock_irqsave(&dev->spinlock, flags); + INIT_LIST_HEAD(&dev->sio_avail); + INIT_LIST_HEAD(&dev->sio_full); + for (i = 0; i < dev->n_sbufs; i++) { + INIT_LIST_HEAD(&dev->sio_bufs[i].list); + dev->sio_bufs[i].v4lbuf.flags = 0; + } + spin_unlock_irqrestore(&dev->spinlock, flags); + return 0; +} + + +static int stk_vidioc_g_parm(struct file *filp, + void *priv, struct v4l2_streamparm *sp) +{ + if (sp->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + sp->parm.capture.capability = 0; + sp->parm.capture.capturemode = 0; + /*FIXME This is not correct */ + sp->parm.capture.timeperframe.numerator = 1; + sp->parm.capture.timeperframe.denominator = 30; + sp->parm.capture.readbuffers = 2; + sp->parm.capture.extendedmode = 0; + return 0; +} + +static struct file_operations v4l_stk_fops = { + .owner = THIS_MODULE, + .open = v4l_stk_open, + .release = v4l_stk_release, + .read = v4l_stk_read, + .poll = v4l_stk_poll, + .mmap = v4l_stk_mmap, + .ioctl = video_ioctl2, + .llseek = no_llseek +}; + +static void stk_v4l_dev_release(struct video_device *vd) +{ +} + +static struct video_device stk_v4l_data = { + .name = "stkwebcam", + .type = VFL_TYPE_GRABBER, + .type2 = VID_TYPE_CAPTURE, + .minor = -1, + .tvnorms = V4L2_STD_UNKNOWN, + .current_norm = V4L2_STD_UNKNOWN, + .fops = &v4l_stk_fops, + .release = stk_v4l_dev_release, + + .vidioc_querycap = stk_vidioc_querycap, + .vidioc_enum_fmt_cap = stk_vidioc_enum_fmt_cap, + .vidioc_try_fmt_cap = stk_vidioc_try_fmt_cap, + .vidioc_s_fmt_cap = stk_vidioc_s_fmt_cap, + .vidioc_g_fmt_cap = stk_vidioc_g_fmt_cap, + .vidioc_enum_input = stk_vidioc_enum_input, + .vidioc_s_input = stk_vidioc_s_input, + .vidioc_g_input = stk_vidioc_g_input, + .vidioc_s_std = stk_vidioc_s_std, + .vidioc_reqbufs = stk_vidioc_reqbufs, + .vidioc_querybuf = stk_vidioc_querybuf, + .vidioc_qbuf = stk_vidioc_qbuf, + .vidioc_dqbuf = stk_vidioc_dqbuf, + .vidioc_streamon = stk_vidioc_streamon, + .vidioc_streamoff = stk_vidioc_streamoff, + .vidioc_queryctrl = stk_vidioc_queryctrl, + .vidioc_g_ctrl = stk_vidioc_g_ctrl, + .vidioc_s_ctrl = stk_vidioc_s_ctrl, + .vidioc_g_parm = stk_vidioc_g_parm, +}; + + +static int stk_register_video_device(struct stk_camera *dev) +{ + int err; + + dev->vdev = stk_v4l_data; + dev->vdev.debug = debug; + dev->vdev.dev = &dev->interface->dev; + dev->vdev.priv = dev; + err = video_register_device(&dev->vdev, VFL_TYPE_GRABBER, -1); + if (err) + STK_ERROR("v4l registration failed\n"); + else + STK_INFO("Syntek USB2.0 Camera is now controlling video device" + " /dev/video%d\n", dev->vdev.minor); + return err; +} + + +/* USB Stuff */ + +static int stk_camera_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + int i; + int err; + + struct stk_camera *dev = NULL; + struct usb_device *udev = interface_to_usbdev(interface); + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *endpoint; + + dev = kzalloc(sizeof(struct stk_camera), GFP_KERNEL); + if (dev == NULL) { + STK_ERROR("Out of memory !\n"); + return -ENOMEM; + } + + kref_init(&dev->kref); + spin_lock_init(&dev->spinlock); + init_waitqueue_head(&dev->wait_frame); + + dev->udev = udev; + dev->interface = interface; + usb_get_intf(interface); + + dev->vsettings.vflip = vflip; + dev->vsettings.hflip = hflip; + dev->n_sbufs = 0; + set_present(dev); + + /* Set up the endpoint information + * use only the first isoc-in endpoint + * for the current alternate setting */ + iface_desc = interface->cur_altsetting; + + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + endpoint = &iface_desc->endpoint[i].desc; + + if (!dev->isoc_ep + && ((endpoint->bEndpointAddress + & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) + && ((endpoint->bmAttributes + & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_ISOC)) { + /* we found an isoc in endpoint */ + dev->isoc_ep = (endpoint->bEndpointAddress & 0xF); + break; + } + } + if (!dev->isoc_ep) { + STK_ERROR("Could not find isoc-in endpoint"); + kref_put(&dev->kref, stk_camera_cleanup); + return -ENODEV; + } + dev->vsettings.brightness = 0x7fff; + dev->vsettings.palette = V4L2_PIX_FMT_RGB565; + dev->vsettings.mode = MODE_VGA; + dev->frame_size = 640*480*2; + + INIT_LIST_HEAD(&dev->sio_avail); + INIT_LIST_HEAD(&dev->sio_full); + + usb_set_intfdata(interface, dev); + + err = stk_register_video_device(dev); + if (err) { + kref_put(&dev->kref, stk_camera_cleanup); + return err; + } + + stk_create_sysfs_files(&dev->vdev); + + return 0; +} + +static void stk_camera_disconnect(struct usb_interface *interface) +{ + struct stk_camera *dev = usb_get_intfdata(interface); + + usb_set_intfdata(interface, NULL); + unset_present(dev); + + wake_up_interruptible(&dev->wait_frame); + stk_remove_sysfs_files(&dev->vdev); + + kref_put(&dev->kref, stk_camera_cleanup); +} + +static struct usb_driver stk_camera_driver = { + .name = "stkwebcam", + .probe = stk_camera_probe, + .disconnect = stk_camera_disconnect, + .id_table = stkwebcam_table, +}; + + +static int __init stk_camera_init(void) +{ + int result; + + result = usb_register(&stk_camera_driver); + if (result) + STK_ERROR("usb_register failed ! Error number %d\n", result); + + + return result; +} + +static void __exit stk_camera_exit(void) +{ + usb_deregister(&stk_camera_driver); +} + +module_init(stk_camera_init); +module_exit(stk_camera_exit); + + diff --git a/drivers/media/video/stk-webcam.h b/drivers/media/video/stk-webcam.h new file mode 100644 index 000000000000..7e989d1ac1e0 --- /dev/null +++ b/drivers/media/video/stk-webcam.h @@ -0,0 +1,138 @@ +/* + * stk-webcam.h : Driver for Syntek 1125 USB webcam controller + * + * Copyright (C) 2006 Nicolas VIVIEN + * Copyright 2007-2008 Jaime Velasco Juan + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef STKWEBCAM_H +#define STKWEBCAM_H + +#include +#include + +#define DRIVER_VERSION "v0.0.1" +#define DRIVER_VERSION_NUM 0x000001 + +#define MAX_ISO_BUFS 3 +#define ISO_FRAMES_PER_DESC 16 +#define ISO_MAX_FRAME_SIZE 3 * 1024 +#define ISO_BUFFER_SIZE (ISO_FRAMES_PER_DESC * ISO_MAX_FRAME_SIZE) + + +#define PREFIX "stkwebcam: " +#define STK_INFO(str, args...) printk(KERN_INFO PREFIX str, ##args) +#define STK_ERROR(str, args...) printk(KERN_ERR PREFIX str, ##args) +#define STK_WARNING(str, args...) printk(KERN_WARNING PREFIX str, ##args) + +struct stk_iso_buf { + void *data; + int length; + int read; + struct urb *urb; +}; + +/* Streaming IO buffers */ +struct stk_sio_buffer { + struct v4l2_buffer v4lbuf; + char *buffer; + int mapcount; + struct stk_camera *dev; + struct list_head list; +}; + +enum stk_mode {MODE_VGA, MODE_SXGA, MODE_CIF, MODE_QVGA, MODE_QCIF}; + +struct stk_video { + enum stk_mode mode; + int brightness; + __u32 palette; + int hflip; + int vflip; +}; + +enum stk_status { + S_PRESENT = 1, + S_INITIALISED = 2, + S_MEMALLOCD = 4, + S_STREAMING = 8, +}; +#define is_present(dev) ((dev)->status & S_PRESENT) +#define is_initialised(dev) ((dev)->status & S_INITIALISED) +#define is_streaming(dev) ((dev)->status & S_STREAMING) +#define is_memallocd(dev) ((dev)->status & S_MEMALLOCD) +#define set_present(dev) ((dev)->status = S_PRESENT) +#define unset_present(dev) ((dev)->status &= \ + ~(S_PRESENT|S_INITIALISED|S_STREAMING)) +#define set_initialised(dev) ((dev)->status |= S_INITIALISED) +#define set_memallocd(dev) ((dev)->status |= S_MEMALLOCD) +#define unset_memallocd(dev) ((dev)->status &= ~S_MEMALLOCD) +#define set_streaming(dev) ((dev)->status |= S_STREAMING) +#define unset_streaming(dev) ((dev)->status &= ~S_STREAMING) + +struct regval { + unsigned reg; + unsigned val; +}; + +struct stk_camera { + struct video_device vdev; + struct usb_device *udev; + struct usb_interface *interface; + int webcam_model; + struct file *owner; + + u8 isoc_ep; + + struct kref kref; + /* Not sure if this is right */ + atomic_t urbs_used; + + struct stk_video vsettings; + + enum stk_status status; + + spinlock_t spinlock; + wait_queue_head_t wait_frame; + + struct stk_iso_buf *isobufs; + + int frame_size; + /* Streaming buffers */ + unsigned int n_sbufs; + struct stk_sio_buffer *sio_bufs; + struct list_head sio_avail; + struct list_head sio_full; + unsigned sequence; +}; + +#define to_stk_camera(d) container_of(d, struct stk_camera, kref) +#define vdev_to_camera(d) container_of(d, struct stk_camera, vdev) + +void stk_camera_delete(struct kref *); +int stk_camera_write_reg(struct stk_camera *, u16, u8); +int stk_camera_read_reg(struct stk_camera *, u16, int *); + +int stk_sensor_outb(struct stk_camera *dev, u8 reg, u8 val); +int stk_sensor_inb(struct stk_camera *dev, u8 reg, u8 *val); +int stk_sensor_init(struct stk_camera *); +int stk_sensor_configure(struct stk_camera *); +int stk_sensor_sleep(struct stk_camera *dev); +int stk_sensor_wakeup(struct stk_camera *dev); +int stk_sensor_set_brightness(struct stk_camera *dev, int br); + +#endif -- cgit v1.2.3-59-g8ed1b From 15b9becc68793209a2afd6c580bf71a71fee90a6 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 13 Jan 2008 12:02:20 -0300 Subject: V4L/DVB (7020): Add USB ID for a newer variant of Hauppauge WinTV USB2 Thanks to Jeroen Janssen Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.em28xx | 2 +- drivers/media/video/em28xx/em28xx-cards.c | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index dbc19ca9e483..6a8469f2bcae 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -2,7 +2,7 @@ 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2750,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883] 2 -> Terratec Cinergy 250 USB (em2820/em2840) [0ccd:0036] 3 -> Pinnacle PCTV USB 2 (em2820/em2840) [2304:0208] - 4 -> Hauppauge WinTV USB 2 (em2820/em2840) [2040:4200] + 4 -> Hauppauge WinTV USB 2 (em2820/em2840) [2040:4200,2040:4201] 5 -> MSI VOX USB 2.0 (em2820/em2840) 6 -> Terratec Cinergy 200 USB (em2800) 7 -> Leadtek Winfast USB II (em2800) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 5ffdbaab3ad3..fe0ee4518479 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -419,6 +419,8 @@ struct usb_device_id em28xx_id_table [] = { .driver_info = EM2820_BOARD_PINNACLE_USB_2 }, { USB_DEVICE(0x2040, 0x4200), .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, + { USB_DEVICE(0x2040, 0x4201), + .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, { USB_DEVICE(0x2304, 0x0207), .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, { USB_DEVICE(0x2304, 0x021a), -- cgit v1.2.3-59-g8ed1b From c8793b035df7b18997d1cf34254064dac166f009 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 13 Jan 2008 15:42:17 -0300 Subject: V4L/DVB (7021): Move all board specific configuration to em28xx-cards.c This cleanup moves the board-specific configurations to em28xx-cards.c. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 105 +++++++++++++++++++++++++----- drivers/media/video/em28xx/em28xx-input.c | 52 ++------------- drivers/media/video/em28xx/em28xx.h | 46 ++++--------- 3 files changed, 106 insertions(+), 97 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index fe0ee4518479..368a766eb802 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -42,12 +42,36 @@ static int tuner = -1; module_param(tuner, int, 0444); MODULE_PARM_DESC(tuner, "tuner type"); +static unsigned int disable_ir; +module_param(disable_ir, int, 0444); +MODULE_PARM_DESC(disable_ir, "disable infrared remote support"); + struct em28xx_hash_table { unsigned long hash; unsigned int model; unsigned int tuner; }; +/* Boards supported by driver */ + +#define EM2800_BOARD_UNKNOWN 0 +#define EM2820_BOARD_UNKNOWN 1 +#define EM2820_BOARD_TERRATEC_CINERGY_250 2 +#define EM2820_BOARD_PINNACLE_USB_2 3 +#define EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 4 +#define EM2820_BOARD_MSI_VOX_USB_2 5 +#define EM2800_BOARD_TERRATEC_CINERGY_200 6 +#define EM2800_BOARD_LEADTEK_WINFAST_USBII 7 +#define EM2800_BOARD_KWORLD_USB2800 8 +#define EM2820_BOARD_PINNACLE_DVC_90 9 +#define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 10 +#define EM2880_BOARD_TERRATEC_HYBRID_XS 11 +#define EM2820_BOARD_KWORLD_PVRTV2800RF 12 +#define EM2880_BOARD_TERRATEC_PRODIGY_XS 13 +#define EM2820_BOARD_PROLINK_PLAYTV_USB2 14 +#define EM2800_BOARD_VGEAR_POCKETTV 15 +#define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 16 + struct em28xx_board em28xx_boards[] = { [EM2800_BOARD_UNKNOWN] = { .name = "Unknown EM2800 video grabber", @@ -245,26 +269,28 @@ struct em28xx_board em28xx_boards[] = { } }, }, [EM2820_BOARD_MSI_VOX_USB_2] = { - .name = "MSI VOX USB 2.0", - .vchannels = 3, - .tuner_type = TUNER_LG_PAL_NEW_TAPC, - .tda9887_conf = TDA9887_PRESENT | - TDA9887_PORT1_ACTIVE | - TDA9887_PORT2_ACTIVE, - .has_tuner = 1, - .decoder = EM28XX_SAA7114, - .input = { { - .type = EM28XX_VMUX_TELEVISION, - .vmux = SAA7115_COMPOSITE4, - .amux = 0, + .name = "MSI VOX USB 2.0", + .vchannels = 3, + .tuner_type = TUNER_LG_PAL_NEW_TAPC, + .tda9887_conf = TDA9887_PRESENT | + TDA9887_PORT1_ACTIVE | + TDA9887_PORT2_ACTIVE, + .has_tuner = 1, + .max_range_640_480 = 1, + + .decoder = EM28XX_SAA7114, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = SAA7115_COMPOSITE4, + .amux = 0, }, { - .type = EM28XX_VMUX_COMPOSITE1, - .vmux = SAA7115_COMPOSITE0, - .amux = 1, + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = SAA7115_COMPOSITE0, + .amux = 1, }, { - .type = EM28XX_VMUX_SVIDEO, - .vmux = SAA7115_SVIDEO3, - .amux = 1, + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = 1, } }, }, [EM2800_BOARD_TERRATEC_CINERGY_200] = { @@ -649,11 +675,54 @@ static void em28xx_set_model(struct em28xx *dev) dev->video_inputs = em28xx_boards[dev->model].vchannels; dev->analog_gpio = em28xx_boards[dev->model].analog_gpio; dev->has_12mhz_i2s = em28xx_boards[dev->model].has_12mhz_i2s; + dev->max_range_640_480 = em28xx_boards[dev->model].max_range_640_480; if (!em28xx_boards[dev->model].has_tuner) dev->tuner_type = UNSET; } +/* ----------------------------------------------------------------------- */ +void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir) +{ + if (disable_ir) { + ir->get_key = NULL; + return ; + } + + /* detect & configure */ + switch (dev->model) { + case (EM2800_BOARD_UNKNOWN): + break; + case (EM2820_BOARD_UNKNOWN): + break; + case (EM2800_BOARD_TERRATEC_CINERGY_200): + case (EM2820_BOARD_TERRATEC_CINERGY_250): + ir->ir_codes = ir_codes_em_terratec; + ir->get_key = em28xx_get_key_terratec; + snprintf(ir->c.name, sizeof(ir->c.name), + "i2c IR (EM28XX Terratec)"); + break; + case (EM2820_BOARD_PINNACLE_USB_2): + ir->ir_codes = ir_codes_pinnacle_grey; + ir->get_key = em28xx_get_key_pinnacle_usb_grey; + snprintf(ir->c.name, sizeof(ir->c.name), + "i2c IR (EM28XX Pinnacle PCTV)"); + break; + case (EM2820_BOARD_HAUPPAUGE_WINTV_USB_2): + ir->ir_codes = ir_codes_hauppauge_new; + ir->get_key = em28xx_get_key_em_haup; + snprintf(ir->c.name, sizeof(ir->c.name), + "i2c IR (EM2840 Hauppauge)"); + break; + case (EM2820_BOARD_MSI_VOX_USB_2): + break; + case (EM2800_BOARD_LEADTEK_WINFAST_USBII): + break; + case (EM2800_BOARD_KWORLD_USB2800): + break; + } +} + void em28xx_card_setup(struct em28xx *dev) { em28xx_set_model(dev); diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c index e3894b68c4ee..10da2fd8d987 100644 --- a/drivers/media/video/em28xx/em28xx-input.c +++ b/drivers/media/video/em28xx/em28xx-input.c @@ -30,11 +30,7 @@ #include "em28xx.h" -static unsigned int disable_ir = 0; -module_param(disable_ir, int, 0444); -MODULE_PARM_DESC(disable_ir,"disable infrared remote support"); - -static unsigned int ir_debug = 0; +static unsigned int ir_debug; module_param(ir_debug, int, 0644); MODULE_PARM_DESC(ir_debug,"enable debug messages [IR]"); @@ -43,7 +39,7 @@ MODULE_PARM_DESC(ir_debug,"enable debug messages [IR]"); /* ----------------------------------------------------------------------- */ -static int get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) { unsigned char b; @@ -72,7 +68,7 @@ static int get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) } -static int get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) { unsigned char buf[2]; unsigned char code; @@ -103,7 +99,8 @@ static int get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) return 1; } -static int get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw) +int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key, + u32 *ir_raw) { unsigned char buf[3]; @@ -125,45 +122,6 @@ static int get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw return 1; } -/* ----------------------------------------------------------------------- */ -void em28xx_set_ir(struct em28xx * dev,struct IR_i2c *ir) -{ - if (disable_ir) { - ir->get_key=NULL; - return ; - } - - /* detect & configure */ - switch (dev->model) { - case (EM2800_BOARD_UNKNOWN): - break; - case (EM2820_BOARD_UNKNOWN): - break; - case (EM2800_BOARD_TERRATEC_CINERGY_200): - case (EM2820_BOARD_TERRATEC_CINERGY_250): - ir->ir_codes = ir_codes_em_terratec; - ir->get_key = get_key_terratec; - snprintf(ir->c.name, sizeof(ir->c.name), "i2c IR (EM28XX Terratec)"); - break; - case (EM2820_BOARD_PINNACLE_USB_2): - ir->ir_codes = ir_codes_pinnacle_grey; - ir->get_key = get_key_pinnacle_usb_grey; - snprintf(ir->c.name, sizeof(ir->c.name), "i2c IR (EM28XX Pinnacle PCTV)"); - break; - case (EM2820_BOARD_HAUPPAUGE_WINTV_USB_2): - ir->ir_codes = ir_codes_hauppauge_new; - ir->get_key = get_key_em_haup; - snprintf(ir->c.name, sizeof(ir->c.name), "i2c IR (EM2840 Hauppauge)"); - break; - case (EM2820_BOARD_MSI_VOX_USB_2): - break; - case (EM2800_BOARD_LEADTEK_WINFAST_USBII): - break; - case (EM2800_BOARD_KWORLD_USB2800): - break; - } -} - /* ---------------------------------------------------------------------- * Local variables: * c-basic-offset: 8 diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 2ba34e5b4cc2..3ef80d8b566e 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -30,26 +30,6 @@ #include #include -/* Boards supported by driver */ - -#define EM2800_BOARD_UNKNOWN 0 -#define EM2820_BOARD_UNKNOWN 1 -#define EM2820_BOARD_TERRATEC_CINERGY_250 2 -#define EM2820_BOARD_PINNACLE_USB_2 3 -#define EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 4 -#define EM2820_BOARD_MSI_VOX_USB_2 5 -#define EM2800_BOARD_TERRATEC_CINERGY_200 6 -#define EM2800_BOARD_LEADTEK_WINFAST_USBII 7 -#define EM2800_BOARD_KWORLD_USB2800 8 -#define EM2820_BOARD_PINNACLE_DVC_90 9 -#define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 10 -#define EM2880_BOARD_TERRATEC_HYBRID_XS 11 -#define EM2820_BOARD_KWORLD_PVRTV2800RF 12 -#define EM2880_BOARD_TERRATEC_PRODIGY_XS 13 -#define EM2820_BOARD_PROLINK_PLAYTV_USB2 14 -#define EM2800_BOARD_VGEAR_POCKETTV 15 -#define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 16 - #define UNSET -1 /* maximum number of em28xx boards */ @@ -185,6 +165,7 @@ struct em28xx_board { unsigned int has_msp34xx:1; unsigned int mts_firmware:1; unsigned int has_12mhz_i2s:1; + unsigned int max_range_640_480:1; unsigned int analog_gpio; @@ -251,6 +232,7 @@ struct em28xx { unsigned int stream_on:1; /* Locks streams */ unsigned int has_audio_class:1; unsigned int has_12mhz_i2s:1; + unsigned int max_range_640_480:1; int video_inputs; /* number of video inputs */ struct list_head devlist; @@ -352,10 +334,6 @@ void em28xx_do_i2c_scan(struct em28xx *dev); int em28xx_i2c_register(struct em28xx *dev); int em28xx_i2c_unregister(struct em28xx *dev); -/* Provided by em28xx-input.c */ - -void em28xx_set_ir(struct em28xx * dev,struct IR_i2c *ir); - /* Provided by em28xx-core.c */ u32 em28xx_request_buffers(struct em28xx *dev, u32 count); @@ -393,6 +371,14 @@ extern void em28xx_card_setup(struct em28xx *dev); extern struct em28xx_board em28xx_boards[]; extern struct usb_device_id em28xx_id_table[]; extern const unsigned int em28xx_bcount; +void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir); + +/* Provided by em28xx-input.c */ +/* TODO: Check if the standard get_key handlers on ir-common can be used */ +int em28xx_get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw); +int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw); +int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key, + u32 *ir_raw); /* em2800 registers */ #define EM2800_AUDIOSRC_REG 0x08 @@ -550,21 +536,17 @@ inline static int em28xx_gamma_set(struct em28xx *dev, s32 val) /*FIXME: maxw should be dependent of alt mode */ inline static unsigned int norm_maxw(struct em28xx *dev) { - switch (dev->model) { - case EM2820_BOARD_MSI_VOX_USB_2: + if (dev->max_range_640_480) return 640; - default: + else return 720; - } } inline static unsigned int norm_maxh(struct em28xx *dev) { - switch (dev->model) { - case EM2820_BOARD_MSI_VOX_USB_2: + if (dev->max_range_640_480) return 480; - default: + else return (dev->norm & V4L2_STD_625_50) ? 576 : 480; - } } #endif -- cgit v1.2.3-59-g8ed1b From dfd8c04ec14b88bc2849e62d6ff9e36f31352b60 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 13 Jan 2008 19:36:11 -0300 Subject: V4L/DVB (7022): Fix timestamp presentation on vivi driver Due to date overflow, vivi were not working fine anymore. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/vivi.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index c9d23633fe42..1db067c02815 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -173,7 +173,8 @@ struct vivi_dev { struct vivi_dmaqueue vidq; /* Several counters */ - int h, m, s, us, jiffies; + int h, m, s, ms; + unsigned long jiffies; char timestr[13]; int mv_count; /* Controls bars movement */ @@ -348,10 +349,10 @@ static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf) /* Updates stream time */ - dev->us += jiffies_to_usecs(jiffies-dev->jiffies); + dev->ms += jiffies_to_msecs(jiffies-dev->jiffies); dev->jiffies = jiffies; - if (dev->us >= 1000000) { - dev->us -= 1000000; + if (dev->ms >= 1000) { + dev->ms -= 1000; dev->s++; if (dev->s >= 60) { dev->s -= 60; @@ -365,7 +366,7 @@ static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf) } } sprintf(dev->timestr, "%02d:%02d:%02d:%03d", - dev->h, dev->m, dev->s, (dev->us + 500) / 1000); + dev->h, dev->m, dev->s, dev->ms); dprintk(dev, 2, "vivifill at %s: Buffer 0x%08lx size= %d\n", dev->timestr, (unsigned long)tmpbuf, pos); @@ -1073,11 +1074,11 @@ found: dev->h = 0; dev->m = 0; dev->s = 0; - dev->us = 0; + dev->ms = 0; dev->mv_count = 0; dev->jiffies = jiffies; sprintf(dev->timestr, "%02d:%02d:%02d:%03d", - dev->h, dev->m, dev->s, (dev->us + 500) / 1000); + dev->h, dev->m, dev->s, dev->ms); videobuf_queue_vmalloc_init(&fh->vb_vidq, &vivi_video_qops, NULL, &dev->slock, fh->type, V4L2_FIELD_INTERLACED, -- cgit v1.2.3-59-g8ed1b From 1f8d30083abc17897b897787c39d446eb9d99fe0 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 13 Jan 2008 19:40:30 -0300 Subject: V4L/DVB (7023): Fix a regresion left by changeset 7e65d6e8f6df Changeset 7e65d6e8f6df removed a very bad hack on mmap(). However, the fixes weren't considering usermap and overlay memory models. This were breaking direct reading from /dev/video?, used mostly by mpeg aware drivers. Thanks to Steven Toth for reporting the issue and bissecting it. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/videobuf-core.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/videobuf-core.c b/drivers/media/video/videobuf-core.c index c3adbd686ffe..80a14da9acef 100644 --- a/drivers/media/video/videobuf-core.c +++ b/drivers/media/video/videobuf-core.c @@ -102,10 +102,14 @@ int videobuf_iolock(struct videobuf_queue *q, struct videobuf_buffer *vb, since mmap_mapper() method should be called before _iolock. On some cases, the mmap_mapper() is called only after scheduling. */ - wait_event_timeout(vb->done, q->is_mmapped, msecs_to_jiffies(100)); - if (!q->is_mmapped) { - printk(KERN_ERR "Error: mmap_mapper() never called!\n"); - return -EINVAL; + if (vb->memory == V4L2_MEMORY_MMAP) { + wait_event_timeout(vb->done, q->is_mmapped, + msecs_to_jiffies(100)); + if (!q->is_mmapped) { + printk(KERN_ERR + "Error: mmap_mapper() never called!\n"); + return -EINVAL; + } } return CALL(q, iolock, q, vb, fbuf); -- cgit v1.2.3-59-g8ed1b From 6200bbaa5bd8b6751931364dfa4aa1cdd5efa686 Mon Sep 17 00:00:00 2001 From: Thierry MERLE Date: Thu, 10 Jan 2008 18:20:34 -0300 Subject: V4L/DVB (7024): usbvision: YUV to RGB conversion fixes All YUV to RGB conversions in usbvision were reverted (conversion to BGR but saying RGB to the application) Signed-off-by: Thierry MERLE Acked-by: Dwaine Garden Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/usbvision/usbvision-core.c | 300 ++++++++++++++----------- 1 file changed, 166 insertions(+), 134 deletions(-) diff --git a/drivers/media/video/usbvision/usbvision-core.c b/drivers/media/video/usbvision/usbvision-core.c index 1e52a0387aa5..56775ab8b75d 100644 --- a/drivers/media/video/usbvision/usbvision-core.c +++ b/drivers/media/video/usbvision/usbvision-core.c @@ -633,25 +633,29 @@ static enum ParseState usbvision_parse_lines_422(struct usb_usbvision *usbvision YUV_TO_RGB_BY_THE_BOOK(yuyv[0], yuyv[1], yuyv[3], rv, gv, bv); switch (frame->v4l2_format.format) { - case V4L2_PIX_FMT_RGB565: - *f++ = (0x1F & (bv >> 3)) | (0xE0 & (gv << 3)); - *f++ = (0x07 & (gv >> 5)) | (0xF8 & rv); - break; - case V4L2_PIX_FMT_RGB24: - *f++ = bv; - *f++ = gv; - *f++ = rv; - break; - case V4L2_PIX_FMT_RGB32: - *f++ = bv; - *f++ = gv; - *f++ = rv; - f++; - break; - case V4L2_PIX_FMT_RGB555: - *f++ = (0x1F & (bv >> 3)) | (0xE0 & (gv << 2)); - *f++ = (0x03 & (gv >> 6)) | (0x7C & (rv >> 1)); - break; + case V4L2_PIX_FMT_RGB565: + *f++ = (0x1F & rv) | + (0xE0 & (gv << 5)); + *f++ = (0x07 & (gv >> 3)) | + (0xF8 & bv); + break; + case V4L2_PIX_FMT_RGB24: + *f++ = rv; + *f++ = gv; + *f++ = bv; + break; + case V4L2_PIX_FMT_RGB32: + *f++ = rv; + *f++ = gv; + *f++ = bv; + f++; + break; + case V4L2_PIX_FMT_RGB555: + *f++ = (0x1F & rv) | + (0xE0 & (gv << 5)); + *f++ = (0x03 & (gv >> 3)) | + (0x7C & (bv << 2)); + break; } } clipmask_index += clipmask_add; @@ -665,25 +669,29 @@ static enum ParseState usbvision_parse_lines_422(struct usb_usbvision *usbvision YUV_TO_RGB_BY_THE_BOOK(yuyv[2], yuyv[1], yuyv[3], rv, gv, bv); switch (frame->v4l2_format.format) { - case V4L2_PIX_FMT_RGB565: - *f++ = (0x1F & (bv >> 3)) | (0xE0 & (gv << 3)); - *f++ = (0x07 & (gv >> 5)) | (0xF8 & rv); - break; - case V4L2_PIX_FMT_RGB24: - *f++ = bv; - *f++ = gv; - *f++ = rv; - break; - case V4L2_PIX_FMT_RGB32: - *f++ = bv; - *f++ = gv; - *f++ = rv; - f++; - break; - case V4L2_PIX_FMT_RGB555: - *f++ = (0x1F & (bv >> 3)) | (0xE0 & (gv << 2)); - *f++ = (0x03 & (gv >> 6)) | (0x7C & (rv >> 1)); - break; + case V4L2_PIX_FMT_RGB565: + *f++ = (0x1F & rv) | + (0xE0 & (gv << 5)); + *f++ = (0x07 & (gv >> 3)) | + (0xF8 & bv); + break; + case V4L2_PIX_FMT_RGB24: + *f++ = rv; + *f++ = gv; + *f++ = bv; + break; + case V4L2_PIX_FMT_RGB32: + *f++ = rv; + *f++ = gv; + *f++ = bv; + f++; + break; + case V4L2_PIX_FMT_RGB555: + *f++ = (0x1F & rv) | + (0xE0 & (gv << 5)); + *f++ = (0x03 & (gv >> 3)) | + (0x7C & (bv << 2)); + break; } } clipmask_index += clipmask_add; @@ -951,22 +959,26 @@ static enum ParseState usbvision_parse_compress(struct usb_usbvision *usbvision, *f++ = Y[Idx]; break; case V4L2_PIX_FMT_RGB555: - *f++ = (0x1F & (bv >> 3)) | (0xE0 & (gv << 2)); - *f++ = (0x03 & (gv >> 6)) | (0x7C & (rv >> 1)); + *f++ = (0x1F & rv) | + (0xE0 & (gv << 5)); + *f++ = (0x03 & (gv >> 3)) | + (0x7C & (bv << 2)); break; case V4L2_PIX_FMT_RGB565: - *f++ = (0x1F & (bv >> 3)) | (0xE0 & (gv << 3)); - *f++ = (0x07 & (gv >> 5)) | (0xF8 & rv); + *f++ = (0x1F & rv) | + (0xE0 & (gv << 5)); + *f++ = (0x07 & (gv >> 3)) | + (0xF8 & bv); break; case V4L2_PIX_FMT_RGB24: - *f++ = bv; - *f++ = gv; *f++ = rv; + *f++ = gv; + *f++ = bv; break; case V4L2_PIX_FMT_RGB32: - *f++ = bv; - *f++ = gv; *f++ = rv; + *f++ = gv; + *f++ = bv; f++; break; } @@ -1080,28 +1092,33 @@ static enum ParseState usbvision_parse_lines_420(struct usb_usbvision *usbvision r_ = (y_ + ur) >> 16; switch (frame->v4l2_format.format) { - case V4L2_PIX_FMT_RGB565: - g = LIMIT_RGB(g_); - *f_even++ = (0x1F & (LIMIT_RGB(b_) >> 3)) | (0xE0 & (g << 3)); - *f_even++ = (0x07 & ( g >> 5)) | (0xF8 & LIMIT_RGB(r_)); - break; - case V4L2_PIX_FMT_RGB24: - *f_even++ = LIMIT_RGB(b_); - *f_even++ = LIMIT_RGB(g_); - *f_even++ = LIMIT_RGB(r_); - break; - case V4L2_PIX_FMT_RGB32: - *f_even++ = LIMIT_RGB(b_); - *f_even++ = LIMIT_RGB(g_); - *f_even++ = LIMIT_RGB(r_); - f_even++; - break; - case V4L2_PIX_FMT_RGB555: - g = LIMIT_RGB(g_); - *f_even++ = (0x1F & (LIMIT_RGB(b_) >> 3)) | (0xE0 & (g << 2)); - *f_even++ = (0x03 & ( g >> 6)) | - (0x7C & (LIMIT_RGB(r_) >> 1)); - break; + case V4L2_PIX_FMT_RGB565: + g = LIMIT_RGB(g_); + *f_even++ = + (0x1F & LIMIT_RGB(r_)) | + (0xE0 & (g << 5)); + *f_even++ = + (0x07 & (g >> 3)) | + (0xF8 & LIMIT_RGB(b_)); + break; + case V4L2_PIX_FMT_RGB24: + *f_even++ = LIMIT_RGB(r_); + *f_even++ = LIMIT_RGB(g_); + *f_even++ = LIMIT_RGB(b_); + break; + case V4L2_PIX_FMT_RGB32: + *f_even++ = LIMIT_RGB(r_); + *f_even++ = LIMIT_RGB(g_); + *f_even++ = LIMIT_RGB(b_); + f_even++; + break; + case V4L2_PIX_FMT_RGB555: + g = LIMIT_RGB(g_); + *f_even++ = (0x1F & LIMIT_RGB(r_)) | + (0xE0 & (g << 5)); + *f_even++ = (0x03 & (g >> 3)) | + (0x7C & (LIMIT_RGB(b_) << 2)); + break; } } clipmask_even_index += clipmask_add; @@ -1119,28 +1136,33 @@ static enum ParseState usbvision_parse_lines_420(struct usb_usbvision *usbvision r_ = (y_ + ur) >> 16; switch (frame->v4l2_format.format) { - case V4L2_PIX_FMT_RGB565: - g = LIMIT_RGB(g_); - *f_even++ = (0x1F & (LIMIT_RGB(b_) >> 3)) | (0xE0 & (g << 3)); - *f_even++ = (0x07 & ( g >> 5)) | (0xF8 & LIMIT_RGB(r_)); - break; - case V4L2_PIX_FMT_RGB24: - *f_even++ = LIMIT_RGB(b_); - *f_even++ = LIMIT_RGB(g_); - *f_even++ = LIMIT_RGB(r_); - break; - case V4L2_PIX_FMT_RGB32: - *f_even++ = LIMIT_RGB(b_); - *f_even++ = LIMIT_RGB(g_); - *f_even++ = LIMIT_RGB(r_); - f_even++; - break; - case V4L2_PIX_FMT_RGB555: - g = LIMIT_RGB(g_); - *f_even++ = (0x1F & (LIMIT_RGB(b_) >> 3)) | (0xE0 & (g << 2)); - *f_even++ = (0x03 & ( g >> 6)) | - (0x7C & (LIMIT_RGB(r_) >> 1)); - break; + case V4L2_PIX_FMT_RGB565: + g = LIMIT_RGB(g_); + *f_even++ = + (0x1F & LIMIT_RGB(r_)) | + (0xE0 & (g << 5)); + *f_even++ = + (0x07 & (g >> 3)) | + (0xF8 & LIMIT_RGB(b_)); + break; + case V4L2_PIX_FMT_RGB24: + *f_even++ = LIMIT_RGB(r_); + *f_even++ = LIMIT_RGB(g_); + *f_even++ = LIMIT_RGB(b_); + break; + case V4L2_PIX_FMT_RGB32: + *f_even++ = LIMIT_RGB(r_); + *f_even++ = LIMIT_RGB(g_); + *f_even++ = LIMIT_RGB(b_); + f_even++; + break; + case V4L2_PIX_FMT_RGB555: + g = LIMIT_RGB(g_); + *f_even++ = (0x1F & LIMIT_RGB(r_)) | + (0xE0 & (g << 5)); + *f_even++ = (0x03 & (g >> 3)) | + (0x7C & (LIMIT_RGB(b_) << 2)); + break; } } clipmask_even_index += clipmask_add; @@ -1160,28 +1182,33 @@ static enum ParseState usbvision_parse_lines_420(struct usb_usbvision *usbvision r_ = (y_ + ur) >> 16; switch (frame->v4l2_format.format) { - case V4L2_PIX_FMT_RGB565: - g = LIMIT_RGB(g_); - *f_odd++ = (0x1F & (LIMIT_RGB(b_) >> 3)) | (0xE0 & (g << 3)); - *f_odd++ = (0x07 & ( g >> 5)) | (0xF8 & LIMIT_RGB(r_)); - break; - case V4L2_PIX_FMT_RGB24: - *f_odd++ = LIMIT_RGB(b_); - *f_odd++ = LIMIT_RGB(g_); - *f_odd++ = LIMIT_RGB(r_); - break; - case V4L2_PIX_FMT_RGB32: - *f_odd++ = LIMIT_RGB(b_); - *f_odd++ = LIMIT_RGB(g_); - *f_odd++ = LIMIT_RGB(r_); - f_odd++; - break; - case V4L2_PIX_FMT_RGB555: - g = LIMIT_RGB(g_); - *f_odd++ = (0x1F & (LIMIT_RGB(b_) >> 3)) | (0xE0 & (g << 2)); - *f_odd++ = (0x03 & ( g >> 6)) | - (0x7C & (LIMIT_RGB(r_) >> 1)); - break; + case V4L2_PIX_FMT_RGB565: + g = LIMIT_RGB(g_); + *f_odd++ = + (0x1F & LIMIT_RGB(r_)) | + (0xE0 & (g << 5)); + *f_odd++ = + (0x07 & (g >> 3)) | + (0xF8 & LIMIT_RGB(b_)); + break; + case V4L2_PIX_FMT_RGB24: + *f_odd++ = LIMIT_RGB(r_); + *f_odd++ = LIMIT_RGB(g_); + *f_odd++ = LIMIT_RGB(b_); + break; + case V4L2_PIX_FMT_RGB32: + *f_odd++ = LIMIT_RGB(r_); + *f_odd++ = LIMIT_RGB(g_); + *f_odd++ = LIMIT_RGB(b_); + f_odd++; + break; + case V4L2_PIX_FMT_RGB555: + g = LIMIT_RGB(g_); + *f_odd++ = (0x1F & LIMIT_RGB(r_)) | + (0xE0 & (g << 5)); + *f_odd++ = (0x03 & (g >> 3)) | + (0x7C & (LIMIT_RGB(b_) << 2)); + break; } } clipmask_odd_index += clipmask_add; @@ -1199,28 +1226,33 @@ static enum ParseState usbvision_parse_lines_420(struct usb_usbvision *usbvision r_ = (y_ + ur) >> 16; switch (frame->v4l2_format.format) { - case V4L2_PIX_FMT_RGB565: - g = LIMIT_RGB(g_); - *f_odd++ = (0x1F & (LIMIT_RGB(b_) >> 3)) | (0xE0 & (g << 3)); - *f_odd++ = (0x07 & ( g >> 5)) | (0xF8 & LIMIT_RGB(r_)); - break; - case V4L2_PIX_FMT_RGB24: - *f_odd++ = LIMIT_RGB(b_); - *f_odd++ = LIMIT_RGB(g_); - *f_odd++ = LIMIT_RGB(r_); - break; - case V4L2_PIX_FMT_RGB32: - *f_odd++ = LIMIT_RGB(b_); - *f_odd++ = LIMIT_RGB(g_); - *f_odd++ = LIMIT_RGB(r_); - f_odd++; - break; - case V4L2_PIX_FMT_RGB555: - g = LIMIT_RGB(g_); - *f_odd++ = (0x1F & (LIMIT_RGB(b_) >> 3)) | (0xE0 & (g << 2)); - *f_odd++ = (0x03 & ( g >> 6)) | - (0x7C & (LIMIT_RGB(r_) >> 1)); - break; + case V4L2_PIX_FMT_RGB565: + g = LIMIT_RGB(g_); + *f_odd++ = + (0x1F & LIMIT_RGB(r_)) | + (0xE0 & (g << 5)); + *f_odd++ = + (0x07 & (g >> 3)) | + (0xF8 & LIMIT_RGB(b_)); + break; + case V4L2_PIX_FMT_RGB24: + *f_odd++ = LIMIT_RGB(r_); + *f_odd++ = LIMIT_RGB(g_); + *f_odd++ = LIMIT_RGB(b_); + break; + case V4L2_PIX_FMT_RGB32: + *f_odd++ = LIMIT_RGB(r_); + *f_odd++ = LIMIT_RGB(g_); + *f_odd++ = LIMIT_RGB(b_); + f_odd++; + break; + case V4L2_PIX_FMT_RGB555: + g = LIMIT_RGB(g_); + *f_odd++ = (0x1F & LIMIT_RGB(r_)) | + (0xE0 & (g << 5)); + *f_odd++ = (0x03 & (g >> 3)) | + (0x7C & (LIMIT_RGB(b_) << 2)); + break; } } clipmask_odd_index += clipmask_add; -- cgit v1.2.3-59-g8ed1b From 6bfa6657246013bf999fecda0874105441f6ecb5 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 7 Jan 2008 00:51:48 -0300 Subject: V4L/DVB (7026): tda18271: report when the RF tracking filter calibration has completed Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index 0b41b9513944..c254ac367e72 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -597,6 +597,8 @@ static int tda18271_rf_cal_init(struct dvb_frontend *fe) tda18271_por(fe); + tda_info("tda18271: RF tracking filter calibration complete\n"); + priv->cal_initialized = true; return 0; -- cgit v1.2.3-59-g8ed1b From 518d87399baee908b0353bc0ef7d41c3c46295ec Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 13 Jan 2008 17:01:01 -0300 Subject: V4L/DVB (7027): tda18271: put the device in standby mode during sleep() Add function, tda18271_set_standby_mode. During sleep, enter standby mode with slave tuner output enabled, loop through on and xtal oscillator on. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-common.c | 36 +++++++++++++++++++++++++++ drivers/media/dvb/frontends/tda18271-fe.c | 26 +++++++++++++++---- drivers/media/dvb/frontends/tda18271-priv.h | 3 +++ 3 files changed, 60 insertions(+), 5 deletions(-) diff --git a/drivers/media/dvb/frontends/tda18271-common.c b/drivers/media/dvb/frontends/tda18271-common.c index d7a335659474..cebb6b90b7e0 100644 --- a/drivers/media/dvb/frontends/tda18271-common.c +++ b/drivers/media/dvb/frontends/tda18271-common.c @@ -452,6 +452,42 @@ int tda18271_init_regs(struct dvb_frontend *fe) /*---------------------------------------------------------------------*/ +/* + * Standby modes, EP3 [7:5] + * + * | SM || SM_LT || SM_XT || mode description + * |=====\\=======\\=======\\=================================== + * | 0 || 0 || 0 || normal mode + * |-----||-------||-------||----------------------------------- + * | || || || standby mode w/ slave tuner output + * | 1 || 0 || 0 || & loop thru & xtal oscillator on + * |-----||-------||-------||----------------------------------- + * | 1 || 1 || 0 || standby mode w/ xtal oscillator on + * |-----||-------||-------||----------------------------------- + * | 1 || 1 || 1 || power off + * + */ + +int tda18271_set_standby_mode(struct dvb_frontend *fe, + int sm, int sm_lt, int sm_xt) +{ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + + tda_dbg("sm = %d, sm_lt = %d, sm_xt = %d\n", sm, sm_lt, sm_xt); + + regs[R_EP3] &= ~0xe0; /* clear sm, sm_lt, sm_xt */ + regs[R_EP3] |= sm ? (1 << 7) : 0 | + sm_lt ? (1 << 6) : 0 | + sm_xt ? (1 << 5) : 0; + + tda18271_write_regs(fe, R_EP3, 1); + + return 0; +} + +/*---------------------------------------------------------------------*/ + int tda18271_calc_main_pll(struct dvb_frontend *fe, u32 freq) { /* sets main post divider & divider bytes, but does not write them */ diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index c254ac367e72..c8ab1fda1dea 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -201,8 +201,7 @@ static int tda18271_rf_tracking_filters_correction(struct dvb_frontend *fe, u8 dc_over_dt, rf_tab; /* power up */ - regs[R_EP3] &= ~0xe0; /* sm = 0, sm_lt = 0, sm_xt = 0 */ - tda18271_write_regs(fe, R_EP3, 1); + tda18271_set_standby_mode(fe, 0, 0, 0); /* read die current temperature */ tm_current = tda18271_read_thermometer(fe); @@ -256,9 +255,7 @@ static int tda18271_por(struct dvb_frontend *fe) regs[R_EB21] |= 0x03; /* set agc2_gain to -6 dB */ /* POR mode */ - regs[R_EP3] &= ~0xe0; /* clear sm, sm_lt, sm_xt */ - regs[R_EP3] |= 0x80; /* sm = 1, sm_lt = 0, sm_xt = 0 */ - tda18271_write_regs(fe, R_EP3, 1); + tda18271_set_standby_mode(fe, 1, 0, 0); /* disable 1.5 MHz low pass filter */ regs[R_EB23] &= ~0x04; /* forcelp_fc2_en = 0 */ @@ -610,6 +607,9 @@ static int tda18271_init(struct dvb_frontend *fe) mutex_lock(&priv->lock); + /* power up */ + tda18271_set_standby_mode(fe, 0, 0, 0); + /* initialization */ tda18271_ir_cal_init(fe); @@ -953,6 +953,21 @@ fail: return ret; } +static int tda18271_sleep(struct dvb_frontend *fe) +{ + struct tda18271_priv *priv = fe->tuner_priv; + + mutex_lock(&priv->lock); + + /* standby mode w/ slave tuner output + * & loop thru & xtal oscillator on */ + tda18271_set_standby_mode(fe, 1, 0, 0); + + mutex_unlock(&priv->lock); + + return 0; +} + static int tda18271_release(struct dvb_frontend *fe) { struct tda18271_priv *priv = fe->tuner_priv; @@ -1096,6 +1111,7 @@ static struct dvb_tuner_ops tda18271_tuner_ops = { .frequency_step = 62500 }, .init = tda18271_init, + .sleep = tda18271_sleep, .set_params = tda18271_set_params, .set_analog_params = tda18271_set_analog_params, .release = tda18271_release, diff --git a/drivers/media/dvb/frontends/tda18271-priv.h b/drivers/media/dvb/frontends/tda18271-priv.h index 080efb3991ed..7b939a5325fb 100644 --- a/drivers/media/dvb/frontends/tda18271-priv.h +++ b/drivers/media/dvb/frontends/tda18271-priv.h @@ -188,6 +188,9 @@ extern int tda18271_read_extended(struct dvb_frontend *fe); extern int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len); extern int tda18271_init_regs(struct dvb_frontend *fe); +extern int tda18271_set_standby_mode(struct dvb_frontend *fe, + int sm, int sm_lt, int sm_xt); + extern int tda18271_calc_main_pll(struct dvb_frontend *fe, u32 freq); extern int tda18271_calc_cal_pll(struct dvb_frontend *fe, u32 freq); -- cgit v1.2.3-59-g8ed1b From 839c6c96d05894815b7af0dff22b710ce5a4373a Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 13 Jan 2008 18:29:44 -0300 Subject: V4L/DVB (7028): tda18271: test RF_CAL_OK to see if we need additional RF calibration Test RF_CAL_OK to see if we need to perform the RF tracking filter calibration after returning from standby. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index c8ab1fda1dea..8eb9a537970a 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -586,6 +586,11 @@ static int tda18271_calc_rf_filter_curve(struct dvb_frontend *fe) static int tda18271_rf_cal_init(struct dvb_frontend *fe) { struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + + /* test RF_CAL_OK to see if we need init */ + if ((regs[R_EP1] & 0x10) == 0) + priv->cal_initialized = false; if (priv->cal_initialized) return 0; -- cgit v1.2.3-59-g8ed1b From 0f96251e7bfb2b2798f35e70efaa54bae65bfb9c Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 13 Jan 2008 22:01:07 -0300 Subject: V4L/DVB (7029): tda18271: provide a choice whether to perform rf cal on init or on first tune If module option "cal" is set to 1, the ~22 sec rf tracking filter calibration sequence will be invoked on startup. Otherwise, the calibration will take place during the first tune. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index 8eb9a537970a..7c80516a4487 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -27,6 +27,10 @@ module_param_named(debug, tda18271_debug, int, 0644); MODULE_PARM_DESC(debug, "set debug level " "(info=1, map=2, reg=4, adv=8, cal=16 (or-able))"); +int tda18271_cal_on_startup; +module_param_named(cal, tda18271_cal_on_startup, int, 0644); +MODULE_PARM_DESC(cal, "perform RF tracking filter calibration on startup"); + static LIST_HEAD(tda18271_list); static DEFINE_MUTEX(tda18271_list_mutex); @@ -1177,6 +1181,10 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr, mutex_lock(&priv->lock); tda18271_init_regs(fe); + + if ((tda18271_cal_on_startup) && (priv->id == TDA18271HDC2)) + tda18271_rf_cal_init(fe); + mutex_unlock(&priv->lock); } -- cgit v1.2.3-59-g8ed1b From 99beeee9e927bf0c8d62e462a2fda86fa2c1450b Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 13 Jan 2008 20:02:52 -0300 Subject: V4L/DVB (7030): Kconfig: add missing selections for VIDEO_PVRUSB2 VIDEO_PVRUSB2 must select: VIDEO_SAA711X, VIDEO_CX25840, VIDEO_MSP3400, and VIDEO_WM8775 Signed-off-by: Michael Krufky Acked-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/media/video/pvrusb2/Kconfig b/drivers/media/video/pvrusb2/Kconfig index 95e4396011c1..6fc1b8be1a1f 100644 --- a/drivers/media/video/pvrusb2/Kconfig +++ b/drivers/media/video/pvrusb2/Kconfig @@ -5,6 +5,10 @@ config VIDEO_PVRUSB2 select VIDEO_TUNER select VIDEO_TVEEPROM select VIDEO_CX2341X + select VIDEO_SAA711X + select VIDEO_CX25840 + select VIDEO_MSP3400 + select VIDEO_WM8775 ---help--- This is a video4linux driver for Conexant 23416 based usb2 personal video recorder devices. -- cgit v1.2.3-59-g8ed1b From bc835d80d9cd912cfa8beb6ad4549cd8160d3601 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 14 Jan 2008 11:10:54 -0300 Subject: V4L/DVB (7032): tda18271: tda18271_cal_on_startup should be declared static This module option variable is only handled within the file tda18271-fe.c - Declare this variable as static. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index 7c80516a4487..dd3657e459b1 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -27,7 +27,7 @@ module_param_named(debug, tda18271_debug, int, 0644); MODULE_PARM_DESC(debug, "set debug level " "(info=1, map=2, reg=4, adv=8, cal=16 (or-able))"); -int tda18271_cal_on_startup; +static int tda18271_cal_on_startup; module_param_named(cal, tda18271_cal_on_startup, int, 0644); MODULE_PARM_DESC(cal, "perform RF tracking filter calibration on startup"); -- cgit v1.2.3-59-g8ed1b From a2a9b1eceb50993ef9e126dffc2f678fd6602158 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Fri, 11 Jan 2008 22:03:42 -0300 Subject: V4L/DVB (7035): drivers/media/common: Add missing video_device_release Video_device_alloc returns the result of a kzalloc. In this case, the value is stored in a local variable which is not copied elsewhere before the point of the error return (video_register_device does not save its first argument anywhere if it returns a negative value). Thus, a video_device_release it needed before the error return. The problem was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) // @@ type T,T1,T2; identifier E; statement S; expression x1,x2,x3; int ret; @@ T E; ... * E = video_device_alloc(...); if (E == NULL) S ... when != video_device_release(...,(T1)E,...) when != if (E != NULL) { ... video_device_release(...,(T1)E,...); ...} when != x1 = (T1)E when != E = x3; when any if (...) { ... when != video_device_release(...,(T2)E,...) when != if (E != NULL) { ... video_device_release(...,(T2)E,...); ...} when != x2 = (T2)E ( * return; | * return ret; ) } // Signed-off-by: Julia Lawall Signed-off-by: Andrew Morton CC: Oliver Endriss CC: Michael Hunold Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/saa7146_fops.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/common/saa7146_fops.c b/drivers/media/common/saa7146_fops.c index b40bf2306fbc..f0703d8bc3e8 100644 --- a/drivers/media/common/saa7146_fops.c +++ b/drivers/media/common/saa7146_fops.c @@ -538,6 +538,7 @@ int saa7146_register_device(struct video_device **vid, struct saa7146_dev* dev, // fixme: -1 should be an insmod parameter *for the extension* (like "video_nr"); if (video_register_device(vfd, type, -1) < 0) { ERR(("cannot register v4l2 device. skipping.\n")); + video_device_release(vfd); return -1; } -- cgit v1.2.3-59-g8ed1b From f37fdf3ff744bffc35a8f1b9d7d655d8d88a0404 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 1 Jan 2008 18:08:10 -0300 Subject: V4L/DVB (7036): radio: Use video_device_release rather than kfree The file drivers/media/video/videodev.c defines both video_device_alloc and video_device_release. These are essentially just kzmalloc and kfree, respectively, but it seems better to use video_device_release, as done in the other media files, rather than kfree, in case the implementation some day changes. The problem was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) // @@ type T,T1,T2; identifier E; statement S; expression x1,x2,x3; int ret; @@ T E; ... * E = video_device_alloc(...); if (E == NULL) S ... when != video_device_release(...,(T1)E,...) when != if (E != NULL) { ... video_device_release(...,(T1)E,...); ...} when != x1 = (T1)E when != E = x3; when any if (...) { ... when != video_device_release(...,(T2)E,...) when != if (E != NULL) { ... video_device_release(...,(T2)E,...); ...} when != x2 = (T2)E ( * return; | * return ret; ) } // Signed-off-by: Julia Lawall Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-maestro.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/radio/radio-maestro.c b/drivers/media/radio/radio-maestro.c index 8e33a19a22a3..bc51f4d23a5a 100644 --- a/drivers/media/radio/radio-maestro.c +++ b/drivers/media/radio/radio-maestro.c @@ -423,7 +423,7 @@ static int __devinit maestro_probe(struct pci_dev *pdev, errunr: video_unregister_device(maestro_radio_inst); errfr1: - kfree(maestro_radio_inst); + video_device_release(maestro_radio_inst); errfr: kfree(radio_unit); err: -- cgit v1.2.3-59-g8ed1b From 438468359e1db16a7d1925fc4f2519a044bbf7dd Mon Sep 17 00:00:00 2001 From: Zoltan Devai Date: Mon, 14 Jan 2008 13:24:38 -0300 Subject: V4L/DVB (7037): Fix build breakage of the bttv driver, when advanced debugging is not enabled Signed-off-by: Zoltan Devai Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bt8xx/bttv-driver.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index ddca21d9c948..907dc62c1783 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -3402,8 +3402,10 @@ static struct video_device bttv_video_template = .vidioc_s_frequency = bttv_s_frequency, .vidioc_log_status = bttv_log_status, .vidioc_querystd = bttv_querystd, +#ifdef CONFIG_VIDEO_ADV_DEBUG .vidioc_g_register = bttv_g_register, .vidioc_s_register = bttv_s_register, +#endif .tvnorms = BTTV_NORMS, .current_norm = V4L2_STD_PAL, }; -- cgit v1.2.3-59-g8ed1b From 78656acdcf4852547a29e929a1b7a98d5ac65f17 Mon Sep 17 00:00:00 2001 From: Tobias Lorenz Date: Mon, 14 Jan 2008 21:55:27 -0300 Subject: V4L/DVB (7038): USB radio driver for Silicon Labs Si470x FM Radio Receivers this patch adds a new driver for the Silicon Labs Si470x FM Radio Receiver. It should also work for the identical ADS/Tech FM Radio Receiver (formerly Instant FM Music) as soon as I find out the USB Vendor and Product ID. The driver is inspired by several other USB and radio drivers, but mainly from the D-Link DSB-R100 USB radio (dsbr100.c). The USB stick currently has an Si4701 FM RDS radio receiver. But the other Si470x devices are pin and register compatible, so that in the future the driver can easily be patched to support these too. Therefore I named the driver radio-si470x and the configuration option usb-si470x. The driver itself just provides the control function over the radio. For getting audio back, the device support the USB audio class, which is implemented in the already existing driver. I tested the driver in the last days, until it now satisfies all my functionality and robustness requirements. The application I used for testing was kradio. Signed-off-by: Tobias Lorenz Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/Kconfig | 10 + drivers/media/radio/Makefile | 1 + drivers/media/radio/radio-si470x.c | 1440 ++++++++++++++++++++++++++++++++++++ 3 files changed, 1451 insertions(+) create mode 100644 drivers/media/radio/radio-si470x.c diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index 11e962f1a97f..8d5214f18cf0 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -351,4 +351,14 @@ config USB_DSBR To compile this driver as a module, choose M here: the module will be called dsbr100. +config USB_SI470X + tristate "Silicon Labs Si470x FM Radio Receiver support" + depends on USB && VIDEO_V4L2 + ---help--- + Say Y here if you want to connect this type of radio to your + computer's USB port. + + To compile this driver as a module, choose M here: the + module will be called radio-silabs. + endif # RADIO_ADAPTERS diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile index cf55a18e3ddf..f36cf4e63b6c 100644 --- a/drivers/media/radio/Makefile +++ b/drivers/media/radio/Makefile @@ -21,5 +21,6 @@ obj-$(CONFIG_RADIO_GEMTEK_PCI) += radio-gemtek-pci.o obj-$(CONFIG_RADIO_TRUST) += radio-trust.o obj-$(CONFIG_RADIO_MAESTRO) += radio-maestro.o obj-$(CONFIG_USB_DSBR) += dsbr100.o +obj-$(CONFIG_USB_SI470X) := radio-si470x.o EXTRA_CFLAGS += -Isound diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c new file mode 100644 index 000000000000..eccbc750e140 --- /dev/null +++ b/drivers/media/radio/radio-si470x.c @@ -0,0 +1,1440 @@ +/* + * drivers/media/radio/radio-si470x.c + * + * Driver for USB radios for the Silicon Labs Si470x FM Radio Receivers: + * - Silicon Labs USB FM Radio Reference Design + * - ADS/Tech FM Radio Receiver (formerly Instant FM Music) (RDX-155-EF) + * + * Copyright (c) 2007 Tobias Lorenz + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + + +/* + * History: + * 2008-01-12 Tobias Lorenz + * Version 1.0.0 + * - First working version + * 2008-01-13 Tobias Lorenz + * Version 1.0.1 + * - Improved error handling, every function now returns errno + * - Improved multi user access (start/mute/stop) + * - Channel doesn't get lost anymore after start/mute/stop + * - RDS support added (polling mode via interrupt EP 1) + * - marked default module parameters with *value* + * - switched from bit structs to bit masks + * - header file cleaned and integrated + * 2008-01-14 Tobias Lorenz + * Version 1.0.2 + * - hex values are now lower case + * - commented USB ID for ADS/Tech moved on todo list + * - blacklisted si470x in hid-quirks.c + * - rds buffer handling functions integrated into *_work, *_read + * - rds_command in si470x_poll exchanged against simple retval + * - check for firmware version 15 + * - code order and prototypes still remain the same + * - spacing and bottom of band codes remain the same + * + * ToDo: + * - check USB Vendor/Product ID for ADS/Tech FM Radio Receiver + * (formerly Instant FM Music) (RDX-155-EF) is 06e1:a155 + * - add seeking support + * - add firmware download/update support + * - add possibility to switch off RDS + * - RDS support: interrupt mode, instead of polling + * - add LED status output + */ + +/* driver definitions */ +#define DRIVER_AUTHOR "Tobias Lorenz " +#define DRIVER_NAME "radio-si470x" +#define DRIVER_VERSION KERNEL_VERSION(1, 0, 2) +#define DRIVER_CARD "Silicon Labs Si470x FM Radio Receiver" +#define DRIVER_DESC "USB radio driver for Si470x FM Radio Receivers" + + +/* kernel includes */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +/* Radio Nr */ +static int radio_nr = -1; +module_param(radio_nr, int, 0); +MODULE_PARM_DESC(radio_nr, "Radio Nr"); + +/* Spacing (kHz) */ +/* 0: 200 kHz (USA, Australia) */ +/* 1: 100 kHz (Europe, Japan) */ +/* 2: 50 kHz */ +static int space = 2; +module_param(space, int, 0); +MODULE_PARM_DESC(radio_nr, "Spacing: 0=200kHz 1=100kHz *2=50kHz*"); + +/* Bottom of Band (MHz) */ +/* 0: 87.5 - 108 MHz (USA, Europe)*/ +/* 1: 76 - 108 MHz (Japan wide band) */ +/* 2: 76 - 90 MHz (Japan) */ +static int band = 1; +module_param(band, int, 0); +MODULE_PARM_DESC(radio_nr, "Band: 0=87.5..108MHz *1=76..108MHz* 2=76..90MHz"); + +/* De-emphasis */ +/* 0: 75 us (USA) */ +/* 1: 50 us (Europe, Australia, Japan) */ +static int de = 1; +module_param(de, int, 0); +MODULE_PARM_DESC(radio_nr, "De-emphasis: 0=75us *1=50us*"); + +/* USB timeout */ +static int usb_timeout = 500; +module_param(usb_timeout, int, 0); +MODULE_PARM_DESC(usb_timeout, "USB timeout (ms): *500*"); + +/* Seek retries */ +static int seek_retries = 100; +module_param(seek_retries, int, 0); +MODULE_PARM_DESC(seek_retries, "Seek retries: *100*"); + +/* RDS buffer blocks */ +static int rds_buf = 100; +module_param(rds_buf, int, 0); +MODULE_PARM_DESC(rds_buf, "RDS buffer entries: *100*"); + +/* RDS maximum block errors */ +static int max_rds_errors = 1; +/* 0 means 0 errors requiring correction */ +/* 1 means 1-2 errors requiring correction (used by original USBRadio.exe) */ +/* 2 means 3-5 errors requiring correction */ +/* 3 means 6+ errors or errors in checkword, correction not possible */ +module_param(max_rds_errors, int, 0); +MODULE_PARM_DESC(max_rds_errors, "RDS maximum block errors: *1*"); + +/* RDS poll frequency */ +static int rds_poll_time = 40; +/* 40 is used by the original USBRadio.exe */ +/* 75 should be okay */ +/* 80 is the usual RDS receive interval */ +module_param(rds_poll_time, int, 0); +MODULE_PARM_DESC(rds_poll_time, "RDS poll time (ms): *40*"); + + + +/************************************************************************** + * Register Definitions + **************************************************************************/ +#define FMRADIO_REGISTER_SIZE 2 /* 16 register bit width */ +#define FMRADIO_REGISTER_NUM 16 /* DEVICEID ... RDSD */ +#define RDS_REGISTER_NUM 6 /* STATUSRSSI ... RDSD */ + +#define DEVICEID 0 /* Device ID */ +#define DEVICEID_PN 0xf000 /* bits 15..12: Part Number */ +#define DEVICEID_MFGID 0x0fff /* bits 11..00: Manufacturer ID */ + +#define CHIPID 1 /* Chip ID */ +#define CHIPID_REV 0xfc00 /* bits 15..10: Chip Version */ +#define CHIPID_DEV 0x0200 /* bits 09..09: Device */ +#define CHIPID_FIRMWARE 0x01ff /* bits 08..00: Firmware Version */ + +#define POWERCFG 2 /* Power Configuration */ +#define POWERCFG_DSMUTE 0x8000 /* bits 15..15: Softmute Disable */ +#define POWERCFG_DMUTE 0x4000 /* bits 14..14: Mute Disable */ +#define POWERCFG_MONO 0x2000 /* bits 13..13: Mono Select */ +#define POWERCFG_RDSM 0x0800 /* bits 11..11: RDS Mode (Si4701 only) */ +#define POWERCFG_SKMODE 0x0400 /* bits 10..10: Seek Mode */ +#define POWERCFG_SEEKUP 0x0200 /* bits 09..09: Seek Direction */ +#define POWERCFG_SEEK 0x0100 /* bits 08..08: Seek */ +#define POWERCFG_DISABLE 0x0040 /* bits 06..06: Powerup Disable */ +#define POWERCFG_ENABLE 0x0001 /* bits 00..00: Powerup Enable */ + +#define CHANNEL 3 /* Channel */ +#define CHANNEL_TUNE 0x8000 /* bits 15..15: Tune */ +#define CHANNEL_CHAN 0x03ff /* bits 09..00: Channel Select */ + +#define SYSCONFIG1 4 /* System Configuration 1 */ +#define SYSCONFIG1_RDSIEN 0x8000 /* bits 15..15: RDS Interrupt Enable (Si4701 only) */ +#define SYSCONFIG1_STCIEN 0x4000 /* bits 14..14: Seek/Tune Complete Interrupt Enable */ +#define SYSCONFIG1_RDS 0x1000 /* bits 12..12: RDS Enable (Si4701 only) */ +#define SYSCONFIG1_DE 0x0800 /* bits 11..11: De-emphasis (0=75us 1=50us) */ +#define SYSCONFIG1_AGCD 0x0400 /* bits 10..10: AGC Disable */ +#define SYSCONFIG1_BLNDADJ 0x00c0 /* bits 07..06: Stereo/Mono Blend Level Adjustment */ +#define SYSCONFIG1_GPIO3 0x0030 /* bits 05..04: General Purpose I/O 3 */ +#define SYSCONFIG1_GPIO2 0x000c /* bits 03..02: General Purpose I/O 2 */ +#define SYSCONFIG1_GPIO1 0x0003 /* bits 01..00: General Purpose I/O 1 */ + +#define SYSCONFIG2 5 /* System Configuration 2 */ +#define SYSCONFIG2_SEEKTH 0xff00 /* bits 15..08: RSSI Seek Threshold */ +#define SYSCONFIG2_BAND 0x0080 /* bits 07..06: Band Select */ +#define SYSCONFIG2_SPACE 0x0030 /* bits 05..04: Channel Spacing */ +#define SYSCONFIG2_VOLUME 0x000f /* bits 03..00: Volume */ + +#define SYSCONFIG3 6 /* System Configuration 3 */ +#define SYSCONFIG3_SMUTER 0xc000 /* bits 15..14: Softmute Attack/Recover Rate */ +#define SYSCONFIG3_SMUTEA 0x3000 /* bits 13..12: Softmute Attenuation */ +#define SYSCONFIG3_SKSNR 0x00f0 /* bits 07..04: Seek SNR Threshold */ +#define SYSCONFIG3_SKCNT 0x000f /* bits 03..00: Seek FM Impulse Detection Threshold */ + +#define TEST1 7 /* Test 1 */ +#define TEST1_AHIZEN 0x4000 /* bits 14..14: Audio High-Z Enable */ + +#define TEST2 8 /* Test 2 */ +/* TEST2 only contains reserved bits */ + +#define BOOTCONFIG 9 /* Boot Configuration */ +/* BOOTCONFIG only contains reserved bits */ + +#define STATUSRSSI 10 /* Status RSSI */ +#define STATUSRSSI_RDSR 0x8000 /* bits 15..15: RDS Ready (Si4701 only) */ +#define STATUSRSSI_STC 0x4000 /* bits 14..14: Seek/Tune Complete */ +#define STATUSRSSI_SF 0x2000 /* bits 13..13: Seek Fail/Band Limit */ +#define STATUSRSSI_AFCRL 0x1000 /* bits 12..12: AFC Rail */ +#define STATUSRSSI_RDSS 0x0800 /* bits 11..11: RDS Synchronized (Si4701 only) */ +#define STATUSRSSI_BLERA 0x0600 /* bits 10..09: RDS Block A Errors (Si4701 only) */ +#define STATUSRSSI_ST 0x0100 /* bits 08..08: Stereo Indicator */ +#define STATUSRSSI_RSSI 0x00ff /* bits 07..00: RSSI (Received Signal Strength Indicator) */ + +#define READCHAN 11 /* Read Channel */ +#define READCHAN_BLERB 0xc000 /* bits 15..14: RDS Block D Errors (Si4701 only) */ +#define READCHAN_BLERC 0x3000 /* bits 13..12: RDS Block C Errors (Si4701 only) */ +#define READCHAN_BLERD 0x0c00 /* bits 11..10: RDS Block B Errors (Si4701 only) */ +#define READCHAN_READCHAN 0x03ff /* bits 09..00: Read Channel */ + +#define RDSA 12 /* RDSA */ +#define RDSA_RDSA 0xffff /* bits 15..00: RDS Block A Data (Si4701 only) */ + +#define RDSB 13 /* RDSB */ +#define RDSB_RDSB 0xffff /* bits 15..00: RDS Block B Data (Si4701 only) */ + +#define RDSC 14 /* RDSC */ +#define RDSC_RDSC 0xffff /* bits 15..00: RDS Block C Data (Si4701 only) */ + +#define RDSD 15 /* RDSD */ +#define RDSD_RDSD 0xffff /* bits 15..00: RDS Block D Data (Si4701 only) */ + + + +/************************************************************************** + * USB HID reports + **************************************************************************/ + +/* Reports 1-16 give direct read/write access to the 16 Si470x registers */ +/* with the (REPORT_ID - 1) corresponding to the register address across USB */ +/* endpoint 0 using GET_REPORT and SET_REPORT */ +#define REGISTER_REPORT_SIZE (FMRADIO_REGISTER_SIZE + 1) +#define REGISTER_REPORT(reg) ((reg) + 1) + +/* Report 17 gives direct read/write access to the entire Si470x register */ +/* map across endpoint 0 using GET_REPORT and SET_REPORT */ +#define ENTIRE_REPORT_SIZE (FMRADIO_REGISTER_NUM * FMRADIO_REGISTER_SIZE + 1) +#define ENTIRE_REPORT 17 + +/* Report 18 is used to send the lowest 6 Si470x registers up the HID */ +/* interrupt endpoint 1 to Windows every 20 milliseconds for status */ +#define RDS_REPORT_SIZE (RDS_REGISTER_NUM * FMRADIO_REGISTER_SIZE + 1) +#define RDS_REPORT 18 + +/* Report 19: LED state */ +#define LED_REPORT_SIZE 3 +#define LED_REPORT 19 + +/* Report 19: stream */ +#define STREAM_REPORT_SIZE 3 +#define STREAM_REPORT 19 + +/* Report 20: scratch */ +#define SCRATCH_PAGE_SIZE 63 +#define SCRATCH_REPORT_SIZE (SCRATCH_PAGE_SIZE + 1) +#define SCRATCH_REPORT 20 + +/* Reports 19-22: flash upgrade of the C8051F321 */ +#define WRITE_REPORT 19 +#define FLASH_REPORT 20 +#define CRC_REPORT 21 +#define RESPONSE_REPORT 22 + +/* Report 23: currently unused, but can accept 60 byte reports on the HID */ +/* interrupt out endpoint 2 every 1 millisecond */ +#define UNUSED_REPORT 23 + + + +/************************************************************************** + * software/hardware versions + **************************************************************************/ +#define FMRADIO_SW_VERSION_NOT_BOOTLOADABLE 6 +#define FMRADIO_SW_VERSION 7 +#define FMRADIO_SW_VERSION_CURRENT 15 +#define FMRADIO_HW_VERSION 1 + +#define SCRATCH_PAGE_SW_VERSION 1 +#define SCRATCH_PAGE_HW_VERSION 2 + + + +/************************************************************************** + * LED State definitions + **************************************************************************/ +#define LED_COMMAND 0x35 + +#define NO_CHANGE_LED 0x00 +#define ALL_COLOR_LED 0x01 /* streaming state */ +#define BLINK_GREEN_LED 0x02 /* connect state */ +#define BLINK_RED_LED 0x04 +#define BLINK_ORANGE_LED 0x10 /* disconnect state */ +#define SOLID_GREEN_LED 0x20 /* tuning/seeking state */ +#define SOLID_RED_LED 0x40 /* bootload state */ +#define SOLID_ORANGE_LED 0x80 + + + +/************************************************************************** + * Stream State definitions + **************************************************************************/ +#define STREAM_COMMAND 0x36 +#define STREAM_VIDPID 0x00 +#define STREAM_AUDIO 0xff + + + +/************************************************************************** + * bootloader / flash commands + **************************************************************************/ + +/* Unique ID sent to bootloader and required to put into a bootload state */ +#define UNIQUE_BL_ID 0x34 + +/* Mask for the flash data */ +#define FLASH_DATA_MASK 0x55 + +/* Bootloader commands */ +#define GET_SW_VERSION_COMMAND 0x00 +#define SET_PAGE_COMMAND 0x01 +#define ERASE_PAGE_COMMAND 0x02 +#define WRITE_PAGE_COMMAND 0x03 +#define CRC_ON_PAGE_COMMAND 0x04 +#define READ_FLASH_BYTE_COMMAND 0x05 +#define RESET_DEVICE_COMMAND 0x06 +#define GET_HW_VERSION_COMMAND 0x07 +#define BLANK 0xff + +/* Bootloader command responses */ +#define COMMAND_OK 0x01 +#define COMMAND_FAILED 0x02 +#define COMMAND_PENDING 0x03 + +/* Buffer sizes */ +#define COMMAND_BUFFER_SIZE 4 +#define RESPONSE_BUFFER_SIZE 2 +#define FLASH_BUFFER_SIZE 64 +#define CRC_BUFFER_SIZE 3 + + + +/************************************************************************** + * Driver private definitions + **************************************************************************/ + +/* private data */ +struct si470x_device { + /* reference to USB and video device */ + struct usb_device *usbdev; + struct video_device *videodev; + + /* are these really necessary ? */ + int users; + + /* report buffer (maximum 64 bytes) */ + unsigned char buf[64]; + + /* Silabs internal registers (0..15) */ + unsigned short registers[FMRADIO_REGISTER_NUM]; + + /* RDS receive buffer */ + struct work_struct work; + struct timer_list timer; + spinlock_t lock; + unsigned char *buffer; + unsigned int buf_size; + unsigned int rd_index; + unsigned int wr_index; + unsigned int block_count; + unsigned char last_blocknum; + wait_queue_head_t read_queue; + int data_available_for_read; +}; + +/* register acccess functions */ +static int si470x_get_report(struct si470x_device *radio, int size); +static int si470x_set_report(struct si470x_device *radio, int size); +static int si470x_get_register(struct si470x_device *radio, int regnr); +static int si470x_set_register(struct si470x_device *radio, int regnr); +static int si470x_get_all_registers(struct si470x_device *radio); +static int si470x_get_rds_registers(struct si470x_device *radio); + +/* high-level functions */ +static int si470x_start(struct si470x_device *radio); +static int si470x_stop(struct si470x_device *radio); +static int si470x_set_chan(struct si470x_device *radio, int chan); +static int si470x_get_freq(struct si470x_device *radio); +static int si470x_set_freq(struct si470x_device *radio, int freq); + +/* RDS functions */ +static void si470x_rds(struct si470x_device *radio); +static void si470x_timer(unsigned long data); +static void si470x_work(struct work_struct *work); + + + +/************************************************************************** + * USB interface definitions + **************************************************************************/ + +/* USB device ID list (Vendor, Product, Class, SubClass, Protocol) */ +static struct usb_device_id si470x_usb_driver_id_table[] = { + /* Silicon Labs USB FM Radio Reference Design */ + { USB_DEVICE_AND_INTERFACE_INFO(0x10c4, 0x818a, USB_CLASS_HID, 0, 0) }, + /* Terminating entry */ + { } +}; +MODULE_DEVICE_TABLE (usb, si470x_usb_driver_id_table); + +/* USB driver functions */ +static int si470x_usb_driver_probe(struct usb_interface *intf, + const struct usb_device_id *id); +static void si470x_usb_driver_disconnect(struct usb_interface *intf); + +/* USB driver interface */ +static struct usb_driver si470x_usb_driver = { + .name = DRIVER_NAME, + .probe = si470x_usb_driver_probe, + .disconnect = si470x_usb_driver_disconnect, + .id_table = si470x_usb_driver_id_table, +}; + + + +/************************************************************************** + * Video4Linux interface definitions + **************************************************************************/ + +/* The frequency is set in units of 62.5 Hz when using V4L2_TUNER_CAP_LOW, */ +/* 62.5 kHz otherwise. */ +/* The tuner is able to have a channel spacing of 50, 100 or 200 kHz. */ +/* tuner->capability is therefore set to V4L2_TUNER_CAP_LOW */ +/* The FREQ_MUL is then: 1 MHz / 62.5 Hz = 16000 */ +#define FREQ_MUL (1000000 / 62.5) + +/* File operations functions */ +static ssize_t si470x_fops_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos); +static unsigned int si470x_fops_poll(struct file *file, + struct poll_table_struct *pts); +static int si470x_fops_open(struct inode *inode, struct file *file); +static int si470x_fops_release(struct inode *inode, struct file *file); + +/* File operations interface */ +static const struct file_operations si470x_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .read = si470x_fops_read, + .poll = si470x_fops_poll, + .ioctl = video_ioctl2, + .compat_ioctl = v4l_compat_ioctl32, + .open = si470x_fops_open, + .release = si470x_fops_release, +}; + +/* Video device functions */ +static int si470x_vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *capability); +static int si470x_vidioc_g_input(struct file *file, void *priv, + unsigned int *i); +static int si470x_vidioc_s_input(struct file *file, void *priv, + unsigned int i); +static int si470x_vidioc_queryctrl(struct file *file, void *priv, + struct v4l2_queryctrl *qc); +static int si470x_vidioc_g_ctrl(struct file *file, void *priv, + struct v4l2_control *ctrl); +static int si470x_vidioc_s_ctrl(struct file *file, void *priv, + struct v4l2_control *ctrl); +static int si470x_vidioc_g_audio(struct file *file, void *priv, + struct v4l2_audio *audio); +static int si470x_vidioc_s_audio(struct file *file, void *priv, + struct v4l2_audio *audio); +static int si470x_vidioc_g_tuner(struct file *file, void *priv, + struct v4l2_tuner *tuner); +static int si470x_vidioc_s_tuner(struct file *file, void *priv, + struct v4l2_tuner *tuner); +static int si470x_vidioc_g_frequency(struct file *file, void *priv, + struct v4l2_frequency *freq); +static int si470x_vidioc_s_frequency(struct file *file, void *priv, + struct v4l2_frequency *freq); + +/* Video device interface */ +static struct video_device si470x_viddev_template = { + .fops = &si470x_fops, + .name = DRIVER_NAME, + .type = VID_TYPE_TUNER, + .release = video_device_release, + .vidioc_querycap = si470x_vidioc_querycap, + .vidioc_g_input = si470x_vidioc_g_input, + .vidioc_s_input = si470x_vidioc_s_input, + .vidioc_queryctrl = si470x_vidioc_queryctrl, + .vidioc_g_ctrl = si470x_vidioc_g_ctrl, + .vidioc_s_ctrl = si470x_vidioc_s_ctrl, + .vidioc_g_audio = si470x_vidioc_g_audio, + .vidioc_s_audio = si470x_vidioc_s_audio, + .vidioc_g_tuner = si470x_vidioc_g_tuner, + .vidioc_s_tuner = si470x_vidioc_s_tuner, + .vidioc_g_frequency = si470x_vidioc_g_frequency, + .vidioc_s_frequency = si470x_vidioc_s_frequency, + .owner = THIS_MODULE, +}; + +/* Query control */ +static struct v4l2_queryctrl radio_queryctrl[] = { +/* HINT: the disabled controls are only here to satify kradio and such apps */ + { + .id = V4L2_CID_AUDIO_VOLUME, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Volume", + .minimum = 0, + .maximum = 15, + .step = 1, + .default_value = 15, + }, + { + .id = V4L2_CID_AUDIO_BALANCE, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, + { + .id = V4L2_CID_AUDIO_BASS, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, + { + .id = V4L2_CID_AUDIO_TREBLE, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, + { + .id = V4L2_CID_AUDIO_MUTE, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Mute", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 1, + }, + { + .id = V4L2_CID_AUDIO_LOUDNESS, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, +}; + + + +/************************************************************************** + * Driver private functions + **************************************************************************/ + +/* + * si470x_get_report - receive a HID report + */ +static int si470x_get_report(struct si470x_device *radio, int size) +{ + return usb_control_msg(radio->usbdev, + usb_rcvctrlpipe(radio->usbdev, 0), + HID_REQ_GET_REPORT, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, + radio->buf[0], 2, + radio->buf, size, usb_timeout); +} + + +/* + * si470x_set_report - send a HID report + */ +static int si470x_set_report(struct si470x_device *radio, int size) +{ + return usb_control_msg(radio->usbdev, + usb_sndctrlpipe(radio->usbdev, 0), + HID_REQ_SET_REPORT, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT, + radio->buf[0], 2, + radio->buf, size, usb_timeout); +} + + +/* + * si470x_get_register - read register + */ +static int si470x_get_register(struct si470x_device *radio, int regnr) +{ + int retval; + + radio->buf[0] = REGISTER_REPORT(regnr); + + retval = si470x_get_report(radio, REGISTER_REPORT_SIZE); + if (retval >= 0) + radio->registers[regnr] = (radio->buf[1] << 8) | radio->buf[2]; + + return (retval < 0) ? -EINVAL : 0; +} + + +/* + * si470x_set_register - write register + */ +static int si470x_set_register(struct si470x_device *radio, int regnr) +{ + int retval; + + radio->buf[0] = REGISTER_REPORT(regnr); + radio->buf[1] = (radio->registers[regnr] & 0xff00) >> 8; + radio->buf[2] = (radio->registers[regnr] & 0x00ff); + + retval = si470x_set_report(radio, REGISTER_REPORT_SIZE); + + return (retval < 0) ? -EINVAL : 0; +} + + +/* + * si470x_get_all_registers - read entire registers + */ +static int si470x_get_all_registers(struct si470x_device *radio) +{ + int retval; + int regnr; + + radio->buf[0] = ENTIRE_REPORT; + + retval = si470x_get_report(radio, ENTIRE_REPORT_SIZE); + + if (retval >= 0) + for (regnr = 0; regnr < FMRADIO_REGISTER_NUM; regnr++) + radio->registers[regnr] = + (radio->buf[regnr * FMRADIO_REGISTER_SIZE + 1] << 8) | + radio->buf[regnr * FMRADIO_REGISTER_SIZE + 2]; + + return (retval < 0) ? -EINVAL : 0; +} + + +/* + * si470x_get_rds_registers - read rds registers + */ +static int si470x_get_rds_registers(struct si470x_device *radio) +{ + int retval; + int regnr; + int size; + + radio->buf[0] = RDS_REPORT; + + retval = usb_interrupt_msg(radio->usbdev, + usb_rcvctrlpipe(radio->usbdev, 1), + radio->buf, RDS_REPORT_SIZE, &size, usb_timeout); + + if (retval >= 0) { + for (regnr = 0; regnr < RDS_REGISTER_NUM; regnr++) { + radio->registers[STATUSRSSI + regnr] = + (radio->buf[regnr * FMRADIO_REGISTER_SIZE + 1] << 8) | + radio->buf[regnr * FMRADIO_REGISTER_SIZE + 2]; + } + } + + return (retval < 0) ? - EINVAL : 0; +} + + +/* + * si470x_start - switch on radio + */ +static int si470x_start(struct si470x_device *radio) +{ + int retval; + + /* powercfg */ + radio->registers[POWERCFG] = + POWERCFG_DMUTE | POWERCFG_ENABLE | POWERCFG_RDSM; + retval = si470x_set_register(radio, POWERCFG); + if (retval < 0) + return retval; + + /* sysconfig 1 */ + radio->registers[SYSCONFIG1] = + SYSCONFIG1_DE | SYSCONFIG1_RDS; + retval = si470x_set_register(radio, SYSCONFIG1); + if (retval < 0) + return retval; + + /* sysconfig 2 */ + radio->registers[SYSCONFIG2] = + (0x3f << 8) | /* SEEKTH */ + (band << 6) | /* BAND */ + (space << 4) | /* SPACE */ + 15; /* VOLUME (max) */ + retval = si470x_set_register(radio, SYSCONFIG2); + if (retval < 0) + return retval; + + /* reset last channel */ + return si470x_set_chan(radio, + radio->registers[CHANNEL] & CHANNEL_CHAN); +} + + +/* + * si470x_stop - switch off radio + */ +static int si470x_stop(struct si470x_device *radio) +{ + /* powercfg */ + radio->registers[POWERCFG] &= ~POWERCFG_DMUTE; + /* POWERCFG_ENABLE has to automatically go low */ + radio->registers[POWERCFG] |= POWERCFG_ENABLE | POWERCFG_DISABLE; + return si470x_set_register(radio, POWERCFG); +} + + +/* + * si470x_set_chan - set the channel + */ +static int si470x_set_chan(struct si470x_device *radio, int chan) +{ + int retval, i; + + /* start tuning */ + radio->registers[CHANNEL] &= ~CHANNEL_CHAN; + radio->registers[CHANNEL] |= CHANNEL_TUNE | chan; + retval = si470x_set_register(radio, CHANNEL); + if (retval < 0) + return retval; + + /* wait till seek operation has completed */ + i = 0; + do { + retval = si470x_get_register(radio, STATUSRSSI); + if (retval < 0) + return retval; + } while ((radio->registers[STATUSRSSI] & STATUSRSSI_STC) && + (++i < seek_retries)); + if (i >= seek_retries) + printk(KERN_WARNING DRIVER_NAME + ": seek does not finish after %d tries\n", i); + + /* stop tuning */ + radio->registers[CHANNEL] &= ~CHANNEL_TUNE; + return si470x_set_register(radio, CHANNEL); +} + + +/* + * si470x_get_freq - get the frequency + */ +static int si470x_get_freq(struct si470x_device *radio) +{ + int spacing, band_bottom, chan, freq; + int retval; + + /* Spacing (kHz) */ + switch (space) { + /* 0: 200 kHz (USA, Australia) */ + default: spacing = 0.200 * FREQ_MUL; break; + /* 1: 100 kHz (Europe, Japan) */ + case 1 : spacing = 0.100 * FREQ_MUL; break; + /* 2: 50 kHz */ + case 2 : spacing = 0.050 * FREQ_MUL; break; + }; + + /* Bottom of Band (MHz) */ + switch (band) { + /* 0: 87.5 - 108 MHz (USA, Europe) */ + default: band_bottom = 87.5 * FREQ_MUL; break; + /* 1: 76 - 108 MHz (Japan wide band) */ + case 1 : band_bottom = 76 * FREQ_MUL; break; + /* 2: 76 - 90 MHz (Japan) */ + case 2 : band_bottom = 76 * FREQ_MUL; break; + }; + + /* read channel */ + retval = si470x_get_register(radio, READCHAN); + if (retval < 0) + return retval; + chan = radio->registers[READCHAN] & READCHAN_READCHAN; + + /* Frequency (MHz) = Spacing (kHz) x Channel + Bottom of Band (MHz) */ + freq = chan * spacing + band_bottom; + + return freq; +} + + +/* + * si470x_set_freq - set the frequency + */ +static int si470x_set_freq(struct si470x_device *radio, int freq) +{ + int spacing, band_bottom, chan; + + /* Spacing (kHz) */ + switch (space) { + /* 0: 200 kHz (USA, Australia) */ + default: spacing = 0.200 * FREQ_MUL; break; + /* 1: 100 kHz (Europe, Japan) */ + case 1 : spacing = 0.100 * FREQ_MUL; break; + /* 2: 50 kHz */ + case 2 : spacing = 0.050 * FREQ_MUL; break; + }; + + /* Bottom of Band (MHz) */ + switch (band) { + /* 0: 87.5 - 108 MHz (USA, Europe) */ + default: band_bottom = 87.5 * FREQ_MUL; break; + /* 1: 76 - 108 MHz (Japan wide band) */ + case 1 : band_bottom = 76 * FREQ_MUL; break; + /* 2: 76 - 90 MHz (Japan) */ + case 2 : band_bottom = 76 * FREQ_MUL; break; + }; + + /* Chan = [ Freq (Mhz) - Bottom of Band (MHz) ] / Spacing (kHz) */ + chan = (freq - band_bottom) / spacing; + + return si470x_set_chan(radio, chan); +} + + + +/* + * si470x_rds - rds processing function + */ +static void si470x_rds(struct si470x_device *radio) +{ + unsigned long flags; + unsigned char tmpbuf[3]; + unsigned char blocknum; + unsigned char bler; /* RDS block errors */ + unsigned short rds; + unsigned int i; + + if (radio->users == 0) + return; + if (si470x_get_rds_registers(radio) < 0) + return; + if ((radio->registers[STATUSRSSI] & STATUSRSSI_RDSR) == 0) { + /* No RDS group ready */ + return; + } + if ((radio->registers[STATUSRSSI] & STATUSRSSI_RDSS) == 0) { + /* RDS decoder not synchronized */ + return; + } + + for (blocknum = 0; blocknum < 4; blocknum++) { + switch (blocknum) { + default: + bler = (radio->registers[STATUSRSSI] & + STATUSRSSI_BLERA) >> 9; + rds = radio->registers[RDSA]; + break; + case 1: + bler = (radio->registers[READCHAN] & + READCHAN_BLERB) >> 14; + rds = radio->registers[RDSB]; + break; + case 2: + bler = (radio->registers[READCHAN] & + READCHAN_BLERC) >> 12; + rds = radio->registers[RDSC]; + break; + case 3: + bler = (radio->registers[READCHAN] & + READCHAN_BLERD) >> 10; + rds = radio->registers[RDSD]; + break; + }; + + /* Fill the V4L2 RDS buffer */ + tmpbuf[0] = rds & 0x00ff; /* LSB */ + tmpbuf[1] = (rds & 0xff00) >> 8;/* MSB */ + tmpbuf[2] = blocknum; /* offset name */ + tmpbuf[2] |= blocknum << 3; /* received offset */ + if (bler > max_rds_errors) + tmpbuf[2] |= 0x80; /* uncorrectable errors */ + else if (bler > 0) + tmpbuf[2] |= 0x40; /* corrected error(s) */ + + spin_lock_irqsave(&radio->lock, flags); + + /* copy RDS block to internal buffer */ + for (i = 0; i < 3; i++) { + radio->buffer[radio->wr_index] = tmpbuf[i]; + radio->wr_index++; + } + + if (radio->wr_index >= radio->buf_size) + radio->wr_index = 0; + + if (radio->wr_index == radio->rd_index) { + radio->rd_index += 3; + if (radio->rd_index >= radio->buf_size) + radio->rd_index = 0; + } else + radio->block_count++; + + spin_unlock_irqrestore(&radio->lock, flags); + } + + radio->data_available_for_read = 1; + wake_up_interruptible(&radio->read_queue); +} + + +/* + * si470x_timer - rds timer function + */ +static void si470x_timer(unsigned long data) +{ + struct si470x_device *radio = (struct si470x_device *) data; + + schedule_work(&radio->work); +} + + +/* + * si470x_timer - rds work function + */ +static void si470x_work(struct work_struct *work) +{ + struct si470x_device *radio = container_of(work, struct si470x_device, + work); + + if (radio->users == 0) + return; + + si470x_rds(radio); + mod_timer(&radio->timer, jiffies + msecs_to_jiffies(rds_poll_time)); +} + + + +/************************************************************************** + * USB interface functions + **************************************************************************/ + +/* + * si470x_usb_driver_probe - probe for the device + */ +static int si470x_usb_driver_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct si470x_device *radio; + + if (!(radio = kmalloc(sizeof(struct si470x_device), GFP_KERNEL))) + return -ENOMEM; + if (!(radio->videodev = video_device_alloc())) { + kfree(radio); + return -ENOMEM; + } + memcpy(radio->videodev, &si470x_viddev_template, + sizeof(si470x_viddev_template)); + radio->users = 0; + radio->usbdev = interface_to_usbdev(intf); + video_set_drvdata(radio->videodev, radio); + if (video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr)) { + printk(KERN_WARNING DRIVER_NAME + ": Could not register video device\n"); + video_device_release(radio->videodev); + kfree(radio); + return -EIO; + } + usb_set_intfdata(intf, radio); + + /* show some infos about the specific device */ + if (si470x_get_all_registers(radio) < 0) { + video_device_release(radio->videodev); + kfree(radio); + return -EIO; + } + printk(KERN_INFO DRIVER_NAME ": DeviceID=0x%4.4x ChipID=0x%4.4x\n", + radio->registers[DEVICEID], radio->registers[CHIPID]); + + /* check if firmware is current */ + if ((radio->registers[CHIPID] & CHIPID_FIRMWARE) + < FMRADIO_SW_VERSION_CURRENT) { + printk(KERN_WARNING DRIVER_NAME + ": This driver is known to work with chip version %d, " + "but the device has firmware %d. If you have some " + "trouble using this driver, please report to V4L ML " + "at video4linux-list@redhat.com\n", + radio->registers[CHIPID] & CHIPID_FIRMWARE, + FMRADIO_SW_VERSION_CURRENT); + } + + /* set initial frequency */ + si470x_set_freq(radio, 87.5 * FREQ_MUL); /* available in all regions */ + + /* rds initialization */ + radio->buf_size = rds_buf * 3; + if (NULL == (radio->buffer = kmalloc(radio->buf_size, GFP_KERNEL))) { + video_device_release(radio->videodev); + kfree(radio); + return -ENOMEM; + } + radio->block_count = 0; + radio->wr_index = 0; + radio->rd_index = 0; + radio->last_blocknum = 0xff; + init_waitqueue_head(&radio->read_queue); + radio->data_available_for_read = 0; + + /* prepare polling via eventd */ + INIT_WORK(&radio->work, si470x_work); + init_timer(&radio->timer); + radio->timer.function = si470x_timer; + radio->timer.data = (unsigned long) radio; + + return 0; +} + + +/* + * si470x_usb_driver_disconnect - disconnect the device + */ +static void si470x_usb_driver_disconnect(struct usb_interface *intf) +{ + struct si470x_device *radio = usb_get_intfdata(intf); + + del_timer_sync(&radio->timer); + flush_scheduled_work(); + + usb_set_intfdata(intf, NULL); + if (radio) { + video_unregister_device(radio->videodev); + kfree(radio->buffer); + kfree(radio); + } +} + + + +/************************************************************************** + * Video4Linux interface functions + **************************************************************************/ + +/* + * si470x_fops_read - read RDS data + */ +static ssize_t si470x_fops_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + struct rds_command cmd; + unsigned long flags; + unsigned int i; + unsigned int rd_blocks; + + cmd.block_count = count / 3; /* each RDS block needs 3 bytes */ + cmd.result = 0; + cmd.buffer = buf; + cmd.instance = file; + + /* copy RDS block out of internal buffer */ + while (!radio->data_available_for_read) { + if (wait_event_interruptible(radio->read_queue, + radio->data_available_for_read) < 0) + return -EINTR; + } + + spin_lock_irqsave(&radio->lock, flags); + rd_blocks = cmd.block_count; + if (rd_blocks > radio->block_count) + rd_blocks = radio->block_count; + + if (!rd_blocks) { + spin_unlock_irqrestore(&radio->lock, flags); + return cmd.result; + } + + for (i = 0; i < rd_blocks; i++) { + /* copy RDS block to user buffer */ + if (radio->rd_index == radio->wr_index) + break; + + if (copy_to_user(buf, &radio->buffer[radio->rd_index], 3)) + break; + + radio->rd_index += 3; + if (radio->rd_index >= radio->buf_size) + radio->rd_index = 0; + radio->block_count--; + + buf += 3; + cmd.result += 3; + } + radio->data_available_for_read = (radio->block_count > 0); + spin_unlock_irqrestore(&radio->lock, flags); + + return cmd.result; +} + + +/* + * si470x_fops_poll - poll RDS data + */ +static unsigned int si470x_fops_poll(struct file *file, + struct poll_table_struct *pts) +{ + struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + int retval; + + retval = 0; + if (radio->data_available_for_read) + retval = POLLIN | POLLRDNORM; + poll_wait(file, &radio->read_queue, pts); + + return retval; +} + + +/* + * si470x_fops_open - file open + */ +static int si470x_fops_open(struct inode *inode, struct file *file) +{ + int retval; + struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + + radio->users++; + if (radio->users == 1) { + retval = si470x_start(radio); + if (retval < 0) + return retval; + + schedule_work(&radio->work); + } + + return 0; +} + + +/* + * si470x_fops_release - file release + */ +static int si470x_fops_release(struct inode *inode, struct file *file) +{ + int retval; + struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + + if (!radio) + return -ENODEV; + + radio->users--; + if (radio->users == 0) { + radio->data_available_for_read = 1; /* ? */ + wake_up_interruptible(&radio->read_queue); /* ? */ + + retval = si470x_stop(radio); + if (retval < 0) + return retval; + } + + return 0; +} + + +/* + * si470x_vidioc_querycap - query device capabilities + */ +static int si470x_vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *capability) +{ + strlcpy(capability->driver, DRIVER_NAME, sizeof(capability->driver)); + strlcpy(capability->card, DRIVER_CARD, sizeof(capability->card)); + sprintf(capability->bus_info, "USB"); + capability->version = DRIVER_VERSION; + capability->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; + + return 0; +} + + +/* + * si470x_vidioc_g_input - get input + */ +static int si470x_vidioc_g_input(struct file *filp, void *priv, + unsigned int *i) +{ + *i = 0; + + return 0; +} + + +/* + * si470x_vidioc_s_input - set input + */ +static int si470x_vidioc_s_input(struct file *filp, void *priv, unsigned int i) +{ + if (i != 0) + return -EINVAL; + + return 0; +} + + +/* + * si470x_vidioc_queryctrl - enumerate control items + */ +static int si470x_vidioc_queryctrl(struct file *file, void *priv, + struct v4l2_queryctrl *qc) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(radio_queryctrl); i++) { + if (qc->id && qc->id == radio_queryctrl[i].id) { + memcpy(qc, &(radio_queryctrl[i]), sizeof(*qc)); + return 0; + } + } + + return -EINVAL; +} + + +/* + * si470x_vidioc_g_ctrl - get the value of a control + */ +static int si470x_vidioc_g_ctrl(struct file *file, void *priv, + struct v4l2_control *ctrl) +{ + struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + + switch (ctrl->id) { + case V4L2_CID_AUDIO_VOLUME: + ctrl->value = radio->registers[SYSCONFIG2] & + SYSCONFIG2_VOLUME; + break; + case V4L2_CID_AUDIO_MUTE: + ctrl->value = ((radio->registers[POWERCFG] & + POWERCFG_DMUTE) == 0) ? 1 : 0; + break; + } + + return 0; +} + + +/* + * si470x_vidioc_s_ctrl - set the value of a control + */ +static int si470x_vidioc_s_ctrl(struct file *file, void *priv, + struct v4l2_control *ctrl) +{ + struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + + switch (ctrl->id) { + case V4L2_CID_AUDIO_VOLUME: + radio->registers[SYSCONFIG2] &= ~SYSCONFIG2_VOLUME; + radio->registers[SYSCONFIG2] |= ctrl->value; + return si470x_set_register(radio, SYSCONFIG2); + case V4L2_CID_AUDIO_MUTE: + if (ctrl->value == 1) + radio->registers[POWERCFG] &= ~POWERCFG_DMUTE; + else + radio->registers[POWERCFG] |= POWERCFG_DMUTE; + return si470x_set_register(radio, POWERCFG); + } + + return -EINVAL; +} + + +/* + * si470x_vidioc_g_audio - get audio attributes + */ +static int si470x_vidioc_g_audio(struct file *file, void *priv, + struct v4l2_audio *audio) +{ + if (audio->index > 1) + return -EINVAL; + + strcpy(audio->name, "Radio"); + audio->capability = V4L2_AUDCAP_STEREO; + + return 0; +} + + +/* + * si470x_vidioc_s_audio - set audio attributes + */ +static int si470x_vidioc_s_audio(struct file *file, void *priv, + struct v4l2_audio *audio) +{ + if (audio->index != 0) + return -EINVAL; + + return 0; +} + + +/* + * si470x_vidioc_g_tuner - get tuner attributes + */ +static int si470x_vidioc_g_tuner(struct file *file, void *priv, + struct v4l2_tuner *tuner) +{ + int retval; + struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + + if (tuner->index > 0) + return -EINVAL; + + /* read status rssi */ + retval = si470x_get_register(radio, STATUSRSSI); + if (retval < 0) + return retval; + + strcpy(tuner->name, "FM"); + tuner->type = V4L2_TUNER_RADIO; + switch(band) { + /* 0: 87.5 - 108 MHz (USA, Europe, default) */ + default: + tuner->rangelow = 87.5 * FREQ_MUL; + tuner->rangehigh = 108 * FREQ_MUL; + break; + /* 1: 76 - 108 MHz (Japan wide band) */ + case 1 : + tuner->rangelow = 76 * FREQ_MUL; + tuner->rangehigh = 108 * FREQ_MUL; + break; + /* 2: 76 - 90 MHz (Japan) */ + case 2 : + tuner->rangelow = 76 * FREQ_MUL; + tuner->rangehigh = 90 * FREQ_MUL; + break; + }; + tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; + tuner->capability = V4L2_TUNER_CAP_LOW; + + /* Stereo indicator == Stereo (instead of Mono) */ + if ((radio->registers[STATUSRSSI] & STATUSRSSI_ST) == 1) + tuner->audmode = V4L2_TUNER_MODE_STEREO; + else + tuner->audmode = V4L2_TUNER_MODE_MONO; + + /* min is worst, max is best; signal:0..0xffff; rssi: 0..0xff */ + tuner->signal = (radio->registers[STATUSRSSI] & STATUSRSSI_RSSI) + * 0x0101; + + /* automatic frequency control: -1: freq to low, 1 freq to high */ + tuner->afc = 0; + + return 0; +} + + +/* + * si470x_vidioc_s_tuner - set tuner attributes + */ +static int si470x_vidioc_s_tuner(struct file *file, void *priv, + struct v4l2_tuner *tuner) +{ + struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + + if (tuner->index > 0) + return -EINVAL; + + if (tuner->audmode == V4L2_TUNER_MODE_MONO) + radio->registers[POWERCFG] |= POWERCFG_MONO; /* force mono */ + else + radio->registers[POWERCFG] &= ~POWERCFG_MONO; /* try stereo */ + + return si470x_set_register(radio, POWERCFG); +} + + +/* + * si470x_vidioc_g_frequency - get tuner or modulator radio frequency + */ +static int si470x_vidioc_g_frequency(struct file *file, void *priv, + struct v4l2_frequency *freq) +{ + struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + + freq->type = V4L2_TUNER_RADIO; + freq->frequency = si470x_get_freq(radio); + + return 0; +} + + +/* + * si470x_vidioc_s_frequency - set tuner or modulator radio frequency + */ +static int si470x_vidioc_s_frequency(struct file *file, void *priv, + struct v4l2_frequency *freq) +{ + struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + + if (freq->type != V4L2_TUNER_RADIO) + return -EINVAL; + + return si470x_set_freq(radio, freq->frequency); +} + + + +/************************************************************************** + * Module interface definitions and functions + **************************************************************************/ + +/* + * si470x_module_init - module init + */ +static int __init si470x_module_init(void) +{ + printk(KERN_INFO DRIVER_DESC "\n"); + return usb_register(&si470x_usb_driver); +} + + +/* + * si470x_module_exit - module exit + */ +static void __exit si470x_module_exit(void) +{ + usb_deregister(&si470x_usb_driver); +} + + +module_init(si470x_module_init); +module_exit(si470x_module_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_VERSION("1.0.2"); -- cgit v1.2.3-59-g8ed1b From 387d447776484b6e1d08973337aa4c834ea7c6bc Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 15 Jan 2008 11:25:10 -0300 Subject: V4L/DVB (7039): Reorder headers The backports weren't tested, but compile fine. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-si470x.c | 4 ++-- drivers/media/video/stk-webcam.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c index eccbc750e140..ccb167a1acdc 100644 --- a/drivers/media/radio/radio-si470x.c +++ b/drivers/media/radio/radio-si470x.c @@ -72,11 +72,11 @@ #include #include #include -#include -#include #include #include #include +#include +#include #include diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c index f300eca3c473..d37e5e2594b4 100644 --- a/drivers/media/video/stk-webcam.c +++ b/drivers/media/video/stk-webcam.c @@ -30,9 +30,9 @@ #include #include +#include #include #include -#include #include "stk-webcam.h" -- cgit v1.2.3-59-g8ed1b From dfc1c08aab447d49230dacb390d3f2263584d28f Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Tue, 15 Jan 2008 21:35:22 -0300 Subject: V4L/DVB (7041): s5h1409: Bug fix for parallel support Parallel support was not working with the s5h1409 and the Pinnacle HD800i. This patch fixes the demodulator driver and ensures that all existing s5h1409 based products configure the demodulator correctly. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/s5h1409.c | 51 ++++++++++++++++++++++++++----- drivers/media/dvb/frontends/s5h1409.h | 7 +++++ drivers/media/video/cx23885/cx23885-dvb.c | 15 ++++++--- 3 files changed, 61 insertions(+), 12 deletions(-) diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c index 3391777e0b2f..819433485d3b 100644 --- a/drivers/media/dvb/frontends/s5h1409.c +++ b/drivers/media/dvb/frontends/s5h1409.c @@ -98,7 +98,7 @@ static struct init_tab { { 0xac, 0x1003, }, { 0xad, 0x103f, }, { 0xe2, 0x0100, }, - { 0xe3, 0x0000, }, + { 0xe3, 0x1000, }, { 0x28, 0x1010, }, { 0xb1, 0x000e, }, }; @@ -441,9 +441,11 @@ static int s5h1409_set_gpio(struct dvb_frontend* fe, int enable) dprintk("%s(%d)\n", __FUNCTION__, enable); if (enable) - return s5h1409_writereg(state, 0xe3, 0x1100); + return s5h1409_writereg(state, 0xe3, + s5h1409_readreg(state, 0xe3) | 0x1100); else - return s5h1409_writereg(state, 0xe3, 0x1000); + return s5h1409_writereg(state, 0xe3, + s5h1409_readreg(state, 0xe3) & 0xeeff); } static int s5h1409_sleep(struct dvb_frontend* fe, int enable) @@ -513,13 +515,15 @@ static void s5h1409_set_qam_interleave_mode(struct dvb_frontend *fe) s5h1409_writereg(state, 0x96, 0x20); s5h1409_writereg(state, 0xad, ( ((reg1 & 0xf000) >> 4) | (reg2 & 0xf0ff)) ); - s5h1409_writereg(state, 0xab, 0x1100); + s5h1409_writereg(state, 0xab, + s5h1409_readreg(state, 0xab) & 0xeffe); } } else { if (state->qam_state != 1) { state->qam_state = 1; s5h1409_writereg(state, 0x96, 0x08); - s5h1409_writereg(state, 0xab, 0x1101); + s5h1409_writereg(state, 0xab, + s5h1409_readreg(state, 0xab) | 0x1001); } } } @@ -556,6 +560,36 @@ static int s5h1409_set_frontend (struct dvb_frontend* fe, return 0; } +static int s5h1409_set_mpeg_timing(struct dvb_frontend *fe, int mode) +{ + struct s5h1409_state *state = fe->demodulator_priv; + u16 val; + + dprintk("%s(%d)\n", __FUNCTION__, mode); + + val = s5h1409_readreg(state, 0xac) & 0xcfff; + switch (mode) { + case S5H1409_MPEGTIMING_CONTINOUS_INVERTING_CLOCK: + val |= 0x0000; + break; + case S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK: + dprintk("%s(%d) Mode1 or Defaulting\n", __FUNCTION__, mode); + val |= 0x1000; + break; + case S5H1409_MPEGTIMING_NONCONTINOUS_INVERTING_CLOCK: + val |= 0x2000; + break; + case S5H1409_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK: + val |= 0x3000; + break; + default: + return -EINVAL; + } + + /* Configure MPEG Signal Timing charactistics */ + return s5h1409_writereg(state, 0xac, val); +} + /* Reset the demod hardware and reset all of the configuration registers to a default state. */ static int s5h1409_init (struct dvb_frontend* fe) @@ -575,13 +609,16 @@ static int s5h1409_init (struct dvb_frontend* fe) state->current_modulation = VSB_8; if (state->config->output_mode == S5H1409_SERIAL_OUTPUT) - s5h1409_writereg(state, 0xab, 0x100); /* Serial */ + s5h1409_writereg(state, 0xab, + s5h1409_readreg(state, 0xab) | 0x100); /* Serial */ else - s5h1409_writereg(state, 0xab, 0x0); /* Parallel */ + s5h1409_writereg(state, 0xab, + s5h1409_readreg(state, 0xab) & 0xfeff); /* Parallel */ s5h1409_set_spectralinversion(fe, state->config->inversion); s5h1409_set_if_freq(fe, state->if_freq); s5h1409_set_gpio(fe, state->config->gpio); + s5h1409_set_mpeg_timing(fe, state->config->mpeg_timing); s5h1409_softreset(fe); /* Note: Leaving the I2C gate closed. */ diff --git a/drivers/media/dvb/frontends/s5h1409.h b/drivers/media/dvb/frontends/s5h1409.h index b1f433906664..f0bb13fe808b 100644 --- a/drivers/media/dvb/frontends/s5h1409.h +++ b/drivers/media/dvb/frontends/s5h1409.h @@ -51,6 +51,13 @@ struct s5h1409_config #define S5H1409_TUNERLOCKING 0 #define S5H1409_DEMODLOCKING 1 u8 status_mode; + + /* MPEG signal timing */ +#define S5H1409_MPEGTIMING_CONTINOUS_INVERTING_CLOCK 0 +#define S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK 1 +#define S5H1409_MPEGTIMING_NONCONTINOUS_INVERTING_CLOCK 2 +#define S5H1409_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK 3 + u16 mpeg_timing; }; #if defined(CONFIG_DVB_S5H1409) || (defined(CONFIG_DVB_S5H1409_MODULE) && defined(MODULE)) diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 34910368049e..21937d5cbb12 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -126,7 +126,8 @@ static struct s5h1409_config hauppauge_generic_config = { .gpio = S5H1409_GPIO_ON, .qam_if = 44000, .inversion = S5H1409_INVERSION_OFF, - .status_mode = S5H1409_DEMODLOCKING + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, }; static struct s5h1409_config hauppauge_ezqam_config = { @@ -135,7 +136,8 @@ static struct s5h1409_config hauppauge_ezqam_config = { .gpio = S5H1409_GPIO_OFF, .qam_if = 4000, .inversion = S5H1409_INVERSION_ON, - .status_mode = S5H1409_DEMODLOCKING + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, }; static struct s5h1409_config hauppauge_hvr1800lp_config = { @@ -144,7 +146,8 @@ static struct s5h1409_config hauppauge_hvr1800lp_config = { .gpio = S5H1409_GPIO_OFF, .qam_if = 44000, .inversion = S5H1409_INVERSION_OFF, - .status_mode = S5H1409_DEMODLOCKING + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, }; static struct s5h1409_config hauppauge_hvr1500_config = { @@ -152,7 +155,8 @@ static struct s5h1409_config hauppauge_hvr1500_config = { .output_mode = S5H1409_SERIAL_OUTPUT, .gpio = S5H1409_GPIO_OFF, .inversion = S5H1409_INVERSION_OFF, - .status_mode = S5H1409_DEMODLOCKING + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, }; static struct mt2131_config hauppauge_generic_tunerconfig = { @@ -171,7 +175,8 @@ static struct s5h1409_config hauppauge_hvr1500q_config = { .gpio = S5H1409_GPIO_ON, .qam_if = 44000, .inversion = S5H1409_INVERSION_OFF, - .status_mode = S5H1409_DEMODLOCKING + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, }; static struct xc5000_config hauppauge_hvr1500q_tunerconfig = { -- cgit v1.2.3-59-g8ed1b From 27c685a4b09b5e391023d769cddb97e4fcb3b9e1 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Sat, 5 Jan 2008 16:50:14 -0300 Subject: V4L/DVB (7042): xc5000: Tuner analog support From Zhang: This an updated patch that adds analog support for the xc5000 tuner driver. it was tested on a Pinnacle PCTV HD 800i card (patches to follow). Patch commited as-is, cleanup to follow ... Steve. Signed-off-by: Chaogui Zhang Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.tuner | 1 + drivers/media/dvb/frontends/xc5000.c | 213 ++++++++++++++++++++++++++----- drivers/media/dvb/frontends/xc5000.h | 12 +- drivers/media/video/tuner-core.c | 20 +++ drivers/media/video/tuner-types.c | 4 + include/media/tuner.h | 1 + 6 files changed, 213 insertions(+), 38 deletions(-) diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner index 2211c8eac643..0e2394695bb8 100644 --- a/Documentation/video4linux/CARDLIST.tuner +++ b/Documentation/video4linux/CARDLIST.tuner @@ -73,3 +73,4 @@ tuner=71 - Xceive xc2028/xc3028 tuner tuner=72 - Thomson FE6600 tuner=73 - Samsung TCPG 6121P30A tuner=75 - Philips TEA5761 FM Radio +tuner=76 - Xceive 5000 tuner diff --git a/drivers/media/dvb/frontends/xc5000.c b/drivers/media/dvb/frontends/xc5000.c index a036530ee4b4..28048d5307a2 100644 --- a/drivers/media/dvb/frontends/xc5000.c +++ b/drivers/media/dvb/frontends/xc5000.c @@ -22,6 +22,7 @@ #include #include +#include #include #include #include @@ -56,6 +57,10 @@ MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); #define XC_RESULT_I2C_READ_FAILURE 3 #define XC_RESULT_OUT_OF_RANGE 5 +/* Product id */ +#define XC_PRODUCT_ID_FW_NOT_LOADED 0x2000 +#define XC_PRODUCT_ID_FW_LOADED 0x1388 + /* Registers */ #define XREG_INIT 0x00 #define XREG_VIDEO_MODE 0x01 @@ -122,7 +127,29 @@ typedef struct { } XC_TV_STANDARD; /* Tuner standards */ -#define DTV6 17 +#define MN_NTSC_PAL_BTSC 0 +#define MN_NTSC_PAL_A2 1 +#define MN_NTSC_PAL_EIAJ 2 +#define MN_NTSC_PAL_Mono 3 +#define BG_PAL_A2 4 +#define BG_PAL_NICAM 5 +#define BG_PAL_MONO 6 +#define I_PAL_NICAM 7 +#define I_PAL_NICAM_MONO 8 +#define DK_PAL_A2 9 +#define DK_PAL_NICAM 10 +#define DK_PAL_MONO 11 +#define DK_SECAM_A2DK1 12 +#define DK_SECAM_A2LDK3 13 +#define DK_SECAM_A2MONO 14 +#define L_SECAM_NICAM 15 +#define LC_SECAM_NICAM 16 +#define DTV6 17 +#define DTV8 18 +#define DTV7_8 19 +#define DTV7 20 +#define FM_Radio_INPUT2 21 +#define FM_Radio_INPUT1 22 XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = { {"M/N-NTSC/PAL-BTSC", 0x0400, 0x8020}, @@ -184,12 +211,13 @@ static void xc5000_TunerReset(struct dvb_frontend *fe) dprintk(1, "%s()\n", __FUNCTION__); - if (priv->cfg->tuner_reset) { - ret = priv->cfg->tuner_reset(fe); + if (priv->cfg->tuner_callback) { + ret = priv->cfg->tuner_callback(priv->cfg->video_dev, + XC5000_TUNER_RESET, 0); if (ret) printk(KERN_ERR "xc5000: reset failed\n"); } else - printk(KERN_ERR "xc5000: no tuner reset function, fatal\n"); + printk(KERN_ERR "xc5000: no tuner reset callback function, fatal\n"); } static int xc_write_reg(struct xc5000_priv *priv, u16 regAddr, u16 i2cData) @@ -259,7 +287,6 @@ static int xc_load_i2c_sequence(struct dvb_frontend *fe, u8 i2c_sequence[]) index=0; while ((i2c_sequence[index]!=0xFF) || (i2c_sequence[index+1]!=0xFF)) { - len = i2c_sequence[index]* 256 + i2c_sequence[index+1]; if (len == 0x0000) { /* RESET command */ @@ -311,7 +338,7 @@ static int xc_SetTVStandard(struct xc5000_priv *priv, u16 VideoMode, u16 AudioMode) { int ret; - dprintk(1, "%s(%d,%d)\n", __FUNCTION__, VideoMode, AudioMode); + dprintk(1, "%s(0x%04x,0x%04x)\n", __FUNCTION__, VideoMode, AudioMode); dprintk(1, "%s() Standard = %s\n", __FUNCTION__, XC5000_Standard[priv->video_standard].Name); @@ -325,7 +352,11 @@ static int xc_SetTVStandard(struct xc5000_priv *priv, static int xc_shutdown(struct xc5000_priv *priv) { - return xc_write_reg(priv, XREG_POWER_DOWN, 0); + return 0; + /* Fixme: cannot bring tuner back alive once shutdown + * without reloading the driver modules. + * return xc_write_reg(priv, XREG_POWER_DOWN, 0); + */ } static int xc_SetSignalSource(struct xc5000_priv *priv, u16 rf_mode) @@ -349,7 +380,7 @@ static int xc_set_RF_frequency(struct xc5000_priv *priv, u32 freq_hz) { u16 freq_code; - dprintk(1, "%s(%d)\n", __FUNCTION__, freq_hz); + dprintk(1, "%s(%u)\n", __FUNCTION__, freq_hz); if ((freq_hz > xc5000_tuner_ops.info.frequency_max) || (freq_hz < xc5000_tuner_ops.info.frequency_min)) @@ -457,7 +488,7 @@ static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz) { int found = 0; - dprintk(1, "%s(%d)\n", __FUNCTION__, freq_hz); + dprintk(1, "%s(%u)\n", __FUNCTION__, freq_hz); if (xc_set_RF_frequency(priv, freq_hz) != XC_RESULT_SUCCESS) return 0; @@ -480,7 +511,7 @@ static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val) }; if (i2c_transfer(priv->i2c, msg, 2) != 2) { - printk(KERN_WARNING "xc5000 I2C read failed\n"); + printk(KERN_WARNING "xc5000: I2C read failed\n"); return -EREMOTEIO; } @@ -494,7 +525,7 @@ static int xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len) .flags = 0, .buf = buf, .len = len }; if (i2c_transfer(priv->i2c, &msg, 1) != 1) { - printk(KERN_ERR "xc5000 I2C write failed (len=%i)\n", + printk(KERN_ERR "xc5000: I2C write failed (len=%i)\n", (int)len); return -EREMOTEIO; } @@ -519,16 +550,11 @@ static int xc5000_fwupload(struct dvb_frontend* fe) const struct firmware *fw; int ret; - if (!priv->cfg->request_firmware) { - printk(KERN_ERR "xc5000: no firmware callback, fatal\n"); - return -EIO; - } - /* request the firmware, this will block and timeout */ printk(KERN_INFO "xc5000: waiting for firmware upload (%s)...\n", XC5000_DEFAULT_FIRMWARE); - ret = priv->cfg->request_firmware(fe, &fw, XC5000_DEFAULT_FIRMWARE); + ret = request_firmware(&fw, XC5000_DEFAULT_FIRMWARE, &priv->i2c->dev); if (ret) { printk(KERN_ERR "xc5000: Upload failed. (file not found?)\n"); ret = XC_RESULT_RESET_FAILURE; @@ -601,7 +627,6 @@ static int xc5000_set_params(struct dvb_frontend *fe, dprintk(1, "%s() frequency=%d (Hz)\n", __FUNCTION__, params->frequency); - switch(params->u.vsb.modulation) { case VSB_8: case VSB_16: @@ -658,6 +683,93 @@ static int xc5000_set_params(struct dvb_frontend *fe, return 0; } +static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe); + +static int xc5000_set_analog_params(struct dvb_frontend *fe, + struct analog_parameters *params) +{ + struct xc5000_priv *priv = fe->tuner_priv; + int ret; + + if(priv->fwloaded == 0) + xc_load_fw_and_init_tuner(fe); + + dprintk(1, "%s() frequency=%d (in units of 62.5khz)\n", + __FUNCTION__, params->frequency); + + priv->rf_mode = XC_RF_MODE_CABLE; /* Fix me: it could be air. */ + + /* params->frequency is in units of 62.5khz */ + priv->freq_hz = params->frequency * 62500; + + /* FIX ME: Some video standards may have several possible audio + standards. We simply default to one of them here. + */ + if(params->std & V4L2_STD_MN) { + /* default to BTSC audio standard */ + priv->video_standard = MN_NTSC_PAL_BTSC; + goto tune_channel; + } + + if(params->std & V4L2_STD_PAL_BG) { + /* default to NICAM audio standard */ + priv->video_standard = BG_PAL_NICAM; + goto tune_channel; + } + + if(params->std & V4L2_STD_PAL_I) { + /* default to NICAM audio standard */ + priv->video_standard = I_PAL_NICAM; + goto tune_channel; + } + + if(params->std & V4L2_STD_PAL_DK) { + /* default to NICAM audio standard */ + priv->video_standard = DK_PAL_NICAM; + goto tune_channel; + } + + if(params->std & V4L2_STD_SECAM_DK) { + /* default to A2 DK1 audio standard */ + priv->video_standard = DK_SECAM_A2DK1; + goto tune_channel; + } + + if(params->std & V4L2_STD_SECAM_L) { + priv->video_standard = L_SECAM_NICAM; + goto tune_channel; + } + + if(params->std & V4L2_STD_SECAM_LC) { + priv->video_standard = LC_SECAM_NICAM; + goto tune_channel; + } + +tune_channel: + ret = xc_SetSignalSource(priv, priv->rf_mode); + if (ret != XC_RESULT_SUCCESS) { + printk(KERN_ERR + "xc5000: xc_SetSignalSource(%d) failed\n", + priv->rf_mode); + return -EREMOTEIO; + } + + ret = xc_SetTVStandard(priv, + XC5000_Standard[priv->video_standard].VideoMode, + XC5000_Standard[priv->video_standard].AudioMode); + if (ret != XC_RESULT_SUCCESS) { + printk(KERN_ERR "xc5000: xc_SetTVStandard failed\n"); + return -EREMOTEIO; + } + + xc_tune_channel(priv, priv->freq_hz); + + if (debug) + xc_debug_dump(priv); + + return 0; +} + static int xc5000_get_frequency(struct dvb_frontend *fe, u32 *freq) { struct xc5000_priv *priv = fe->tuner_priv; @@ -670,6 +782,7 @@ static int xc5000_get_bandwidth(struct dvb_frontend *fe, u32 *bw) { struct xc5000_priv *priv = fe->tuner_priv; dprintk(1, "%s()\n", __FUNCTION__); + *bw = priv->bandwidth; return 0; } @@ -691,13 +804,12 @@ static int xc5000_get_status(struct dvb_frontend *fe, u32 *status) static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe) { struct xc5000_priv *priv = fe->tuner_priv; - int ret; + int ret = 0; if (priv->fwloaded == 0) { ret = xc5000_fwupload(fe); if (ret != XC_RESULT_SUCCESS) return ret; - priv->fwloaded = 1; } @@ -720,9 +832,27 @@ static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe) static int xc5000_sleep(struct dvb_frontend *fe) { struct xc5000_priv *priv = fe->tuner_priv; + int ret; + dprintk(1, "%s()\n", __FUNCTION__); - return xc_shutdown(priv); + /* On Pinnacle PCTV HD 800i, the tuner cannot be reinitialized + * once shutdown without reloading the driver. Maybe I am not + * doing something right. + * + */ + + ret = xc_shutdown(priv); + if(ret != XC_RESULT_SUCCESS) { + printk(KERN_ERR + "xc5000: %s() unable to shutdown tuner\n", + __FUNCTION__); + return -EREMOTEIO; + } + else { + /* priv->fwloaded = 0; */ + return XC_RESULT_SUCCESS; + } } static int xc5000_init(struct dvb_frontend *fe) @@ -757,14 +887,15 @@ static const struct dvb_tuner_ops xc5000_tuner_ops = { .frequency_step = 50000, }, - .release = xc5000_release, - .init = xc5000_init, - .sleep = xc5000_sleep, + .release = xc5000_release, + .init = xc5000_init, + .sleep = xc5000_sleep, - .set_params = xc5000_set_params, - .get_frequency = xc5000_get_frequency, - .get_bandwidth = xc5000_get_bandwidth, - .get_status = xc5000_get_status + .set_params = xc5000_set_params, + .set_analog_params = xc5000_set_analog_params, + .get_frequency = xc5000_get_frequency, + .get_bandwidth = xc5000_get_bandwidth, + .get_status = xc5000_get_status }; struct dvb_frontend * xc5000_attach(struct dvb_frontend *fe, @@ -783,14 +914,33 @@ struct dvb_frontend * xc5000_attach(struct dvb_frontend *fe, priv->cfg = cfg; priv->bandwidth = BANDWIDTH_6_MHZ; priv->i2c = i2c; - priv->fwloaded = 0; + /* Check if firmware has been loaded. It is possible that another + instance of the driver has loaded the firmware. + */ if (xc5000_readreg(priv, XREG_PRODUCT_ID, &id) != 0) { kfree(priv); return NULL; } - if ((id != 0x2000) && (id != 0x1388)) { + switch(id) { + case XC_PRODUCT_ID_FW_LOADED: + printk(KERN_INFO + "xc5000: Successfully identified at address 0x%02x\n", + cfg->i2c_address); + printk(KERN_INFO + "xc5000: Firmware has been loaded previously\n"); + priv->fwloaded = 1; + break; + case XC_PRODUCT_ID_FW_NOT_LOADED: + printk(KERN_INFO + "xc5000: Successfully identified at address 0x%02x\n", + cfg->i2c_address); + printk(KERN_INFO + "xc5000: Firmware has not been loaded previously\n"); + priv->fwloaded = 0; + break; + default: printk(KERN_ERR "xc5000: Device not found at addr 0x%02x (0x%x)\n", cfg->i2c_address, id); @@ -798,9 +948,6 @@ struct dvb_frontend * xc5000_attach(struct dvb_frontend *fe, return NULL; } - printk(KERN_INFO "xc5000: successfully identified at address 0x%02x\n", - cfg->i2c_address); - memcpy(&fe->ops.tuner_ops, &xc5000_tuner_ops, sizeof(struct dvb_tuner_ops)); diff --git a/drivers/media/dvb/frontends/xc5000.h b/drivers/media/dvb/frontends/xc5000.h index 941b31948133..85b2d438fa41 100644 --- a/drivers/media/dvb/frontends/xc5000.h +++ b/drivers/media/dvb/frontends/xc5000.h @@ -28,13 +28,15 @@ struct dvb_frontend; struct i2c_adapter; struct xc5000_config { - u8 i2c_address; - u32 if_khz; - int (*request_firmware)(struct dvb_frontend *fe, - const struct firmware **fw, char *name); - int (*tuner_reset)(struct dvb_frontend* fe); + u8 i2c_address; + u32 if_khz; + void *video_dev; + int (*tuner_callback) (void *dev, int command, int arg); }; +/* xc5000 callback command */ +#define XC5000_TUNER_RESET 0 + #if defined(CONFIG_DVB_TUNER_XC5000) || defined(CONFIG_DVB_TUNER_XC5000_MODULE) extern struct dvb_frontend* xc5000_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 35976e6cb1b8..16cdeeafeb6c 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -27,6 +27,7 @@ #include "tuner-xc2028.h" #include "tuner-simple.h" #include "tda9887.h" +#include "xc5000.h" #define UNSET (-1U) @@ -329,6 +330,8 @@ static void attach_tda829x(struct tuner *t) tda829x_attach(&t->fe, t->i2c->adapter, t->i2c->addr, &cfg); } +static struct xc5000_config xc5000_cfg; + static void set_type(struct i2c_client *c, unsigned int type, unsigned int new_mode_mask, unsigned int new_config, int (*tuner_callback) (void *dev, int command,int arg)) @@ -428,6 +431,23 @@ static void set_type(struct i2c_client *c, unsigned int type, case TUNER_TDA9887: tda9887_attach(&t->fe, t->i2c->adapter, t->i2c->addr); break; + case TUNER_XC5000: + xc5000_cfg.i2c_address = t->i2c->addr; + xc5000_cfg.if_khz = 5380; + xc5000_cfg.video_dev = c->adapter->algo_data; + xc5000_cfg.tuner_callback = t->tuner_callback; + if (!xc5000_attach(&t->fe, t->i2c->adapter, &xc5000_cfg)) { + t->type = TUNER_ABSENT; + t->mode_mask = T_UNINITIALIZED; + return; + } + { + struct dvb_tuner_ops *xc_tuner_ops; + xc_tuner_ops = &t->fe.ops.tuner_ops; + if(xc_tuner_ops->init != NULL) + xc_tuner_ops->init(&t->fe); + } + break; default: attach_simple_tuner(t); break; diff --git a/drivers/media/video/tuner-types.c b/drivers/media/video/tuner-types.c index e2cd05a05802..883047f9c28c 100644 --- a/drivers/media/video/tuner-types.c +++ b/drivers/media/video/tuner-types.c @@ -1475,6 +1475,10 @@ struct tunertype tuners[] = { .name = "Philips TEA5761 FM Radio", /* see tea5767.c for details */ }, + [TUNER_XC5000] = { /* Xceive 5000 */ + .name = "Xceive 5000 tuner", + /* see xc5000.c for details */ + }, }; unsigned const int tuner_count = ARRAY_SIZE(tuners); diff --git a/include/media/tuner.h b/include/media/tuner.h index 97be269afbee..1bf24a6ed8f1 100644 --- a/include/media/tuner.h +++ b/include/media/tuner.h @@ -121,6 +121,7 @@ #define TUNER_SAMSUNG_TCPG_6121P30A 73 /* Hauppauge PVR-500 PAL */ #define TUNER_TDA9887 74 /* This tuner should be used only internally */ #define TUNER_TEA5761 75 /* Only FM Radio Tuner */ +#define TUNER_XC5000 76 /* Xceive Silicon Tuner */ /* tv card specific */ #define TDA9887_PRESENT (1<<0) -- cgit v1.2.3-59-g8ed1b From 60464da8b1ed8d7c19563f58cadb0ca990448a36 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Sat, 5 Jan 2008 16:53:01 -0300 Subject: V4L/DVB (7043): New card supported(partially): Pinnacle 800i From Zhang: This patch continues the support for the Pinnacle HD 800i. Patch committed as-is, cleanups to follow ... Steve Signed-off-by: Chaogui Zhang Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.cx88 | 1 + drivers/media/video/cx88/cx88-cards.c | 63 +++++++++++++++++++++++++++++++++ drivers/media/video/cx88/cx88-dvb.c | 36 +++++++++++++++++++ drivers/media/video/cx88/cx88-i2c.c | 17 ++++----- drivers/media/video/cx88/cx88-mpeg.c | 7 +++- drivers/media/video/cx88/cx88.h | 2 ++ 6 files changed, 117 insertions(+), 9 deletions(-) diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88 index 82ac8250e978..bc5593bd9704 100644 --- a/Documentation/video4linux/CARDLIST.cx88 +++ b/Documentation/video4linux/CARDLIST.cx88 @@ -56,3 +56,4 @@ 55 -> Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM [c180:c980] 56 -> Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [0070:9600,0070:9601,0070:9602] 57 -> ADS Tech Instant Video PCI [1421:0390] + 58 -> Pinnacle PCTV HD 800i [11bd:0051] diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index d484e5ce579c..3ba31572c657 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1375,6 +1375,32 @@ static const struct cx88_board cx88_boards[] = { .gpio0 = 0x07fa, }}, }, + [CX88_BOARD_PINNACLE_PCTV_HD_800i] = { + .name = "Pinnacle PCTV HD 800i", + .tuner_type = TUNER_XC5000, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX88_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0x04fb, + .gpio1 = 0x10ff, + },{ + .type = CX88_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0x04fb, + .gpio1 = 0x10ef, + .audioroute = 1, + },{ + .type = CX88_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0x04fb, + .gpio1 = 0x10ef, + .audioroute = 1, + }}, + .mpeg = CX88_MPEG_DVB, + }, }; /* ------------------------------------------------------------------ */ @@ -1684,6 +1710,10 @@ static const struct cx88_subid cx88_subids[] = { .subvendor = 0x1421, .subdevice = 0x0390, .card = CX88_BOARD_ADSTECH_PTV_390, + },{ + .subvendor = 0x11bd, + .subdevice = 0x0051, + .card = CX88_BOARD_PINNACLE_PCTV_HD_800i, }, }; @@ -1850,6 +1880,39 @@ static void dvico_fusionhdtv_hybrid_init(struct cx88_core *core) } } +/* ----------------------------------------------------------------------- */ +/* Tuner callback function. Currently only needed for the Pinnacle * + * PCTV HD 800i with an xc5000 sillicon tuner. This is used for both * + * analog tuner attach (tuner-core.c) and dvb tuner attach (cx88-dvb.c) */ + +int cx88_tuner_callback(void *i2c_algo, int command, int arg) +{ + struct i2c_algo_bit_data *algo = i2c_algo; + struct cx88_core *core = algo->data; + + switch(core->boardnr) { + case CX88_BOARD_PINNACLE_PCTV_HD_800i: + if(command == 0) { /* This is the reset command from xc5000 */ + /* Reset XC5000 tuner via GPIO pin #2 */ + cx_set(MO_GP0_IO, 0x00000400); + cx_clear(MO_GP0_IO, 0x00000004); + mdelay(200); + cx_set(MO_GP0_IO, 0x00000004); + printk(KERN_ERR "xc5000: in reset for xc5000\n"); + mdelay(200); + return 0; + } + else { + printk(KERN_ERR + "xc5000: unknown tuner callback command.\n"); + return -EINVAL; + } + break; + } + return 0; /* Should never be here */ +} +EXPORT_SYMBOL(cx88_tuner_callback); + /* ----------------------------------------------------------------------- */ static void cx88_card_list(struct cx88_core *core, struct pci_dev *pci) diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index fce19caf9d04..0246f97a9987 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -40,6 +40,8 @@ #include "cx22702.h" #include "or51132.h" #include "lgdt330x.h" +#include "s5h1409.h" +#include "xc5000.h" #include "nxt200x.h" #include "cx24123.h" #include "isl6421.h" @@ -371,6 +373,22 @@ static struct cx24123_config kworld_dvbs_100_config = { .lnb_polarity = 1, }; +static struct s5h1409_config pinnacle_pctv_hd_800i_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_PARALLEL_OUTPUT, + .gpio = S5H1409_GPIO_ON, + .qam_if = 44000, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING, +}; + +static struct xc5000_config pinnacle_pctv_hd_800i_tuner_config = { + .i2c_address = 0x64, + .if_khz = 5380, + /* cannot set .video_dev here, do it right before attach */ + .tuner_callback = cx88_tuner_callback, +}; + static int dvb_register(struct cx8802_dev *dev) { /* init struct videobuf_dvb */ @@ -625,6 +643,24 @@ static int dvb_register(struct cx8802_dev *dev) dev->dvb.frontend->ops.set_voltage = geniatech_dvbs_set_voltage; } break; + case CX88_BOARD_PINNACLE_PCTV_HD_800i: + /* Parallel mpeg data port and punctured clock mode */ + dev->ts_gen_cntrl = 0x04; + + dev->dvb.frontend = dvb_attach(s5h1409_attach, + &pinnacle_pctv_hd_800i_config, + &dev->core->i2c_adap); + if (dev->dvb.frontend != NULL) { + /* tuner_config.video_dev must point to + * i2c_adap.algo_data + */ + pinnacle_pctv_hd_800i_tuner_config.video_dev = + dev->core->i2c_adap.algo_data; + dvb_attach(xc5000_attach, dev->dvb.frontend, + &dev->core->i2c_adap, + &pinnacle_pctv_hd_800i_tuner_config); + } + break; default: printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n", dev->core->name); diff --git a/drivers/media/video/cx88/cx88-i2c.c b/drivers/media/video/cx88/cx88-i2c.c index 937497c86247..566b26af523e 100644 --- a/drivers/media/video/cx88/cx88-i2c.c +++ b/drivers/media/video/cx88/cx88-i2c.c @@ -109,20 +109,20 @@ static int attach_inform(struct i2c_client *client) if (core->board.radio_type != UNSET) { if ((core->board.radio_addr==ADDR_UNSET)||(core->board.radio_addr==client->addr)) { - tun_setup.mode_mask = T_RADIO; - tun_setup.type = core->board.radio_type; - tun_setup.addr = core->board.radio_addr; - + tun_setup.mode_mask = T_RADIO; + tun_setup.type = core->board.radio_type; + tun_setup.addr = core->board.radio_addr; + tun_setup.tuner_callback = cx88_tuner_callback; client->driver->command (client, TUNER_SET_TYPE_ADDR, &tun_setup); } } if (core->board.tuner_type != UNSET) { if ((core->board.tuner_addr==ADDR_UNSET)||(core->board.tuner_addr==client->addr)) { - tun_setup.mode_mask = T_ANALOG_TV; - tun_setup.type = core->board.tuner_type; - tun_setup.addr = core->board.tuner_addr; - + tun_setup.mode_mask = T_ANALOG_TV; + tun_setup.type = core->board.tuner_type; + tun_setup.addr = core->board.tuner_addr; + tun_setup.tuner_callback = cx88_tuner_callback; client->driver->command (client,TUNER_SET_TYPE_ADDR, &tun_setup); } } @@ -182,6 +182,7 @@ static char *i2c_devs[128] = { [ 0xa0 >> 1 ] = "eeprom", [ 0xc0 >> 1 ] = "tuner (analog)", [ 0xc2 >> 1 ] = "tuner (analog/dvb)", + [ 0xc8 >> 1 ] = "xc5000", }; static void do_i2c_scan(char *name, struct i2c_client *c) diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c index 339a88a64f54..a21b50357a89 100644 --- a/drivers/media/video/cx88/cx88-mpeg.c +++ b/drivers/media/video/cx88/cx88-mpeg.c @@ -102,7 +102,7 @@ static int cx8802_start_dma(struct cx8802_dev *dev, cx_write(TS_GEN_CNTRL, 0x0040 | dev->ts_gen_cntrl); udelay(100); cx_write(MO_PINMUX_IO, 0x00); - cx_write(TS_HW_SOP_CNTRL,0x47<<16|188<<4|0x01); + cx_write(TS_HW_SOP_CNTRL, 0x47<<16|188<<4|0x01); switch (core->boardnr) { case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q: case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T: @@ -117,6 +117,11 @@ static int cx8802_start_dma(struct cx8802_dev *dev, break; case CX88_BOARD_HAUPPAUGE_HVR1300: break; + case CX88_BOARD_PINNACLE_PCTV_HD_800i: + /* Enable MPEG parallel port */ + cx_write(MO_PINMUX_IO, 0x80); + udelay(100); + break; default: cx_write(TS_SOP_STAT, 0x00); break; diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index 0cd2946a2789..4e823f2a539a 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -210,6 +210,7 @@ extern struct sram_channel cx88_sram_channels[]; #define CX88_BOARD_TE_DTV_250_OEM_SWANN 55 #define CX88_BOARD_HAUPPAUGE_HVR1300 56 #define CX88_BOARD_ADSTECH_PTV_390 57 +#define CX88_BOARD_PINNACLE_PCTV_HD_800i 58 enum cx88_itype { CX88_VMUX_COMPOSITE1 = 1, @@ -589,6 +590,7 @@ extern void cx88_call_i2c_clients(struct cx88_core *core, /* ----------------------------------------------------------- */ /* cx88-cards.c */ +extern int cx88_tuner_callback(void *dev, int command, int arg); extern int cx88_get_resources(const struct cx88_core *core, struct pci_dev *pci); extern struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr); -- cgit v1.2.3-59-g8ed1b From 8c70017f5793e68ea48085a65008d713c9a85dde Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Sat, 5 Jan 2008 16:55:45 -0300 Subject: V4L/DVB (7044): XC5000: Fix support for HVR1500Q broken by patch 1 From Zhang: This patch fixes support for the HVR1500Q which was broken when the xc5000 analog patch was added. Patch committed as-is, cleanups to follows .... Steve Signed-off-by: Chaogui Zhang Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/cx23885-cards.c | 28 +++++++++++++++++++++++ drivers/media/video/cx23885/cx23885-dvb.c | 35 ++++++----------------------- drivers/media/video/cx23885/cx23885.h | 1 + 3 files changed, 36 insertions(+), 28 deletions(-) diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index c2d5a4d7228b..ee3f1b099145 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -244,6 +244,34 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) dev->name, tv.model); } +/* Tuner callback function for cx23885 boards. Currently only needed + * for HVR1500Q, which has an xc5000 tuner. + */ +int cx23885_tuner_callback(void *i2c_bus, int command, int arg) +{ + struct cx23885_i2c *bus = i2c_bus; + struct cx23885_dev *dev = bus->dev; + + switch(dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1500Q: + if(command == 0) { /* Tuner Reset Command from xc5000 */ + /* Drive the tuner into reset and out */ + cx_clear(GP0_IO, 0x00000004); + mdelay(200); + cx_set(GP0_IO, 0x00000004); + return 0; + } + else { + printk(KERN_ERR + "%s(): Unknow command.\n", __FUNCTION__); + return -EINVAL; + } + break; + } + + return 0; /* Should never be here */ +} +EXPORT_SYMBOL(cx23885_tuner_callback); void cx23885_gpio_setup(struct cx23885_dev *dev) { switch(dev->board) { diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 21937d5cbb12..61d75d04db8d 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -87,32 +87,6 @@ static void dvb_buf_release(struct videobuf_queue *q, cx23885_free_buffer(q, (struct cx23885_buffer*)vb); } -static int cx23885_request_firmware(struct dvb_frontend *fe, - const struct firmware **fw, char *name) -{ - struct cx23885_tsport *port = fe->dvb->priv; - struct cx23885_dev *dev = port->dev; - - dprintk(1, "%s(?,?,%s)\n", __FUNCTION__, name); - - return request_firmware(fw, name, &dev->pci->dev); -} - -static int hauppauge_hvr1500q_tuner_reset(struct dvb_frontend *fe) -{ - struct cx23885_tsport *port = fe->dvb->priv; - struct cx23885_dev *dev = port->dev; - - dprintk(1, "%s()\n", __FUNCTION__); - - /* Drive the tuner into reset back back */ - cx_clear(GP0_IO, 0x00000004); - mdelay(200); - cx_set(GP0_IO, 0x00000004); - - return 0; -} - static struct videobuf_queue_ops dvb_qops = { .buf_setup = dvb_buf_setup, .buf_prepare = dvb_buf_prepare, @@ -182,8 +156,8 @@ static struct s5h1409_config hauppauge_hvr1500q_config = { static struct xc5000_config hauppauge_hvr1500q_tunerconfig = { .i2c_address = 0x61, .if_khz = 5380, - .request_firmware = cx23885_request_firmware, - .tuner_reset = hauppauge_hvr1500q_tuner_reset + /* cannot set .video_dev here, do it before attach. */ + .tuner_callback = cx23885_tuner_callback }; static struct tda829x_config tda829x_no_probe = { @@ -308,6 +282,11 @@ static int dvb_register(struct cx23885_tsport *port) &hauppauge_hvr1500q_config, &dev->i2c_bus[0].i2c_adap); if (port->dvb.frontend != NULL) { + /* tunerconfig.video_dev must point to + * i2c_adap.algo_data + */ + hauppauge_hvr1500q_tunerconfig.video_dev = + i2c_bus->i2c_adap.algo_data; dvb_attach(xc5000_attach, port->dvb.frontend, &i2c_bus->i2c_adap, &hauppauge_hvr1500q_tunerconfig); diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index 390f9335bdc9..ac9a76624e98 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -393,6 +393,7 @@ extern const unsigned int cx23885_bcount; extern struct cx23885_subid cx23885_subids[]; extern const unsigned int cx23885_idcount; +extern int cx23885_tuner_callback(void *i2c_bus, int command, int arg); extern void cx23885_card_list(struct cx23885_dev *dev); extern int cx23885_ir_init(struct cx23885_dev *dev); extern void cx23885_gpio_setup(struct cx23885_dev *dev); -- cgit v1.2.3-59-g8ed1b From 73c993a8294077ae1b724286da8ac323c25d90db Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Sat, 5 Jan 2008 17:08:05 -0300 Subject: V4L/DVB (7045): xc5000: Small amount of cleanup and commenting xc5000: Small amount of cleanup and commenting, just for clarification. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/xc5000.c | 4 ++-- drivers/media/dvb/frontends/xc5000.h | 12 ++++++++++-- drivers/media/video/cx23885/cx23885-cards.c | 6 +++--- drivers/media/video/cx23885/cx23885-dvb.c | 7 +------ drivers/media/video/cx23885/cx23885.h | 2 +- drivers/media/video/cx88/cx88-cards.c | 7 +++---- drivers/media/video/cx88/cx88-dvb.c | 3 +-- drivers/media/video/tuner-core.c | 2 +- 8 files changed, 22 insertions(+), 21 deletions(-) diff --git a/drivers/media/dvb/frontends/xc5000.c b/drivers/media/dvb/frontends/xc5000.c index 28048d5307a2..a0705a640baf 100644 --- a/drivers/media/dvb/frontends/xc5000.c +++ b/drivers/media/dvb/frontends/xc5000.c @@ -22,7 +22,7 @@ #include #include -#include +#include #include #include #include @@ -212,7 +212,7 @@ static void xc5000_TunerReset(struct dvb_frontend *fe) dprintk(1, "%s()\n", __FUNCTION__); if (priv->cfg->tuner_callback) { - ret = priv->cfg->tuner_callback(priv->cfg->video_dev, + ret = priv->cfg->tuner_callback(priv->cfg->priv, XC5000_TUNER_RESET, 0); if (ret) printk(KERN_ERR "xc5000: reset failed\n"); diff --git a/drivers/media/dvb/frontends/xc5000.h b/drivers/media/dvb/frontends/xc5000.h index 85b2d438fa41..e0e84562aed1 100644 --- a/drivers/media/dvb/frontends/xc5000.h +++ b/drivers/media/dvb/frontends/xc5000.h @@ -30,8 +30,16 @@ struct i2c_adapter; struct xc5000_config { u8 i2c_address; u32 if_khz; - void *video_dev; - int (*tuner_callback) (void *dev, int command, int arg); + + /* For each bridge framework, when it attaches either analog or digital, + * it has to store a reference back to its _core equivalent structure, + * so that it can service the hardware by steering gpio's etc. + * Each bridge implementation is different so cast priv accordingly. + * The xc5000 driver cares not for this value, other than ensuring + * it's passed back to a bridge during tuner_callback(). + */ + void *priv; + int (*tuner_callback) (void *priv, int command, int arg); }; /* xc5000 callback command */ diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index ee3f1b099145..2d414dad5c31 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -247,9 +247,9 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) /* Tuner callback function for cx23885 boards. Currently only needed * for HVR1500Q, which has an xc5000 tuner. */ -int cx23885_tuner_callback(void *i2c_bus, int command, int arg) +int cx23885_tuner_callback(void *priv, int command, int arg) { - struct cx23885_i2c *bus = i2c_bus; + struct cx23885_i2c *bus = priv; struct cx23885_dev *dev = bus->dev; switch(dev->board) { @@ -271,7 +271,7 @@ int cx23885_tuner_callback(void *i2c_bus, int command, int arg) return 0; /* Should never be here */ } -EXPORT_SYMBOL(cx23885_tuner_callback); + void cx23885_gpio_setup(struct cx23885_dev *dev) { switch(dev->board) { diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 61d75d04db8d..ed465c007cea 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -156,7 +156,6 @@ static struct s5h1409_config hauppauge_hvr1500q_config = { static struct xc5000_config hauppauge_hvr1500q_tunerconfig = { .i2c_address = 0x61, .if_khz = 5380, - /* cannot set .video_dev here, do it before attach. */ .tuner_callback = cx23885_tuner_callback }; @@ -282,11 +281,7 @@ static int dvb_register(struct cx23885_tsport *port) &hauppauge_hvr1500q_config, &dev->i2c_bus[0].i2c_adap); if (port->dvb.frontend != NULL) { - /* tunerconfig.video_dev must point to - * i2c_adap.algo_data - */ - hauppauge_hvr1500q_tunerconfig.video_dev = - i2c_bus->i2c_adap.algo_data; + hauppauge_hvr1500q_tunerconfig.priv = i2c_bus; dvb_attach(xc5000_attach, port->dvb.frontend, &i2c_bus->i2c_adap, &hauppauge_hvr1500q_tunerconfig); diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h index ac9a76624e98..7cb2179f2622 100644 --- a/drivers/media/video/cx23885/cx23885.h +++ b/drivers/media/video/cx23885/cx23885.h @@ -393,7 +393,7 @@ extern const unsigned int cx23885_bcount; extern struct cx23885_subid cx23885_subids[]; extern const unsigned int cx23885_idcount; -extern int cx23885_tuner_callback(void *i2c_bus, int command, int arg); +extern int cx23885_tuner_callback(void *priv, int command, int arg); extern void cx23885_card_list(struct cx23885_dev *dev); extern int cx23885_ir_init(struct cx23885_dev *dev); extern void cx23885_gpio_setup(struct cx23885_dev *dev); diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index 3ba31572c657..254290975cdb 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1885,10 +1885,10 @@ static void dvico_fusionhdtv_hybrid_init(struct cx88_core *core) * PCTV HD 800i with an xc5000 sillicon tuner. This is used for both * * analog tuner attach (tuner-core.c) and dvb tuner attach (cx88-dvb.c) */ -int cx88_tuner_callback(void *i2c_algo, int command, int arg) +int cx88_tuner_callback(void *priv, int command, int arg) { - struct i2c_algo_bit_data *algo = i2c_algo; - struct cx88_core *core = algo->data; + struct i2c_algo_bit_data *i2c_algo = priv; + struct cx88_core *core = i2c_algo->data; switch(core->boardnr) { case CX88_BOARD_PINNACLE_PCTV_HD_800i: @@ -1898,7 +1898,6 @@ int cx88_tuner_callback(void *i2c_algo, int command, int arg) cx_clear(MO_GP0_IO, 0x00000004); mdelay(200); cx_set(MO_GP0_IO, 0x00000004); - printk(KERN_ERR "xc5000: in reset for xc5000\n"); mdelay(200); return 0; } diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index 0246f97a9987..c852efca1592 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -385,7 +385,6 @@ static struct s5h1409_config pinnacle_pctv_hd_800i_config = { static struct xc5000_config pinnacle_pctv_hd_800i_tuner_config = { .i2c_address = 0x64, .if_khz = 5380, - /* cannot set .video_dev here, do it right before attach */ .tuner_callback = cx88_tuner_callback, }; @@ -654,7 +653,7 @@ static int dvb_register(struct cx8802_dev *dev) /* tuner_config.video_dev must point to * i2c_adap.algo_data */ - pinnacle_pctv_hd_800i_tuner_config.video_dev = + pinnacle_pctv_hd_800i_tuner_config.priv = dev->core->i2c_adap.algo_data; dvb_attach(xc5000_attach, dev->dvb.frontend, &dev->core->i2c_adap, diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 16cdeeafeb6c..8e406b168d71 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -434,7 +434,7 @@ static void set_type(struct i2c_client *c, unsigned int type, case TUNER_XC5000: xc5000_cfg.i2c_address = t->i2c->addr; xc5000_cfg.if_khz = 5380; - xc5000_cfg.video_dev = c->adapter->algo_data; + xc5000_cfg.priv = c->adapter->algo_data; xc5000_cfg.tuner_callback = t->tuner_callback; if (!xc5000_attach(&t->fe, t->i2c->adapter, &xc5000_cfg)) { t->type = TUNER_ABSENT; -- cgit v1.2.3-59-g8ed1b From 4917019d190d9809287308c4866cbc47d6c1000b Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Tue, 15 Jan 2008 21:57:14 -0300 Subject: V4L/DVB (7046): Finalise support for the Pinnacle HD 8000i Correctly set the atatch structures, enable IR, configure the xc5000 tuner includes. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/xc5000.c | 2 +- drivers/media/video/cx88/cx88-dvb.c | 4 +--- drivers/media/video/cx88/cx88-input.c | 2 ++ drivers/media/video/cx88/cx88-mpeg.c | 8 ++++++-- 4 files changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/media/dvb/frontends/xc5000.c b/drivers/media/dvb/frontends/xc5000.c index a0705a640baf..a13027e09cda 100644 --- a/drivers/media/dvb/frontends/xc5000.c +++ b/drivers/media/dvb/frontends/xc5000.c @@ -22,7 +22,7 @@ #include #include -#include +#include #include #include #include diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index c852efca1592..f7b41eb1bb5a 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -380,6 +380,7 @@ static struct s5h1409_config pinnacle_pctv_hd_800i_config = { .qam_if = 44000, .inversion = S5H1409_INVERSION_OFF, .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK, }; static struct xc5000_config pinnacle_pctv_hd_800i_tuner_config = { @@ -643,9 +644,6 @@ static int dvb_register(struct cx8802_dev *dev) } break; case CX88_BOARD_PINNACLE_PCTV_HD_800i: - /* Parallel mpeg data port and punctured clock mode */ - dev->ts_gen_cntrl = 0x04; - dev->dvb.frontend = dvb_attach(s5h1409_attach, &pinnacle_pctv_hd_800i_config, &dev->core->i2c_adap); diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c index e52de3968c63..f79a1c77414c 100644 --- a/drivers/media/video/cx88/cx88-input.c +++ b/drivers/media/video/cx88/cx88-input.c @@ -224,6 +224,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1: case CX88_BOARD_HAUPPAUGE_HVR1100: case CX88_BOARD_HAUPPAUGE_HVR3000: + case CX88_BOARD_PINNACLE_PCTV_HD_800i: ir_codes = ir_codes_hauppauge_new; ir_type = IR_TYPE_RC5; ir->sampling = 1; @@ -443,6 +444,7 @@ void cx88_ir_irq(struct cx88_core *core) case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1: case CX88_BOARD_HAUPPAUGE_HVR1100: case CX88_BOARD_HAUPPAUGE_HVR3000: + case CX88_BOARD_PINNACLE_PCTV_HD_800i: ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7); ir_dprintk("biphase decoded: %x\n", ircode); if ((ircode & 0xfffff000) != 0x3000) diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c index a21b50357a89..0aedbeaf94cd 100644 --- a/drivers/media/video/cx88/cx88-mpeg.c +++ b/drivers/media/video/cx88/cx88-mpeg.c @@ -118,8 +118,12 @@ static int cx8802_start_dma(struct cx8802_dev *dev, case CX88_BOARD_HAUPPAUGE_HVR1300: break; case CX88_BOARD_PINNACLE_PCTV_HD_800i: - /* Enable MPEG parallel port */ - cx_write(MO_PINMUX_IO, 0x80); + /* Enable MPEG parallel IO and video signal pins */ + cx_write(MO_PINMUX_IO, 0x88); + cx_write(TS_HW_SOP_CNTRL, (0x47 << 16) | (188 << 4)); + dev->ts_gen_cntrl = 5; + cx_write(TS_SOP_STAT, 0); + cx_write(TS_VALERR_CNTRL, 0); udelay(100); break; default: -- cgit v1.2.3-59-g8ed1b From 4e8a23ea3c1333561f8d0f5daee53feee3e85b8a Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Thu, 17 Jan 2008 14:54:53 -0300 Subject: V4L/DVB (7047): fix broken build when CONFIG_USB_SI470X is set Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile index f36cf4e63b6c..a30159f6fa42 100644 --- a/drivers/media/radio/Makefile +++ b/drivers/media/radio/Makefile @@ -21,6 +21,6 @@ obj-$(CONFIG_RADIO_GEMTEK_PCI) += radio-gemtek-pci.o obj-$(CONFIG_RADIO_TRUST) += radio-trust.o obj-$(CONFIG_RADIO_MAESTRO) += radio-maestro.o obj-$(CONFIG_USB_DSBR) += dsbr100.o -obj-$(CONFIG_USB_SI470X) := radio-si470x.o +obj-$(CONFIG_USB_SI470X) += radio-si470x.o EXTRA_CFLAGS += -Isound -- cgit v1.2.3-59-g8ed1b From 3473e342d79be938497a31caedd3c4e8d562485f Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 7 Jan 2008 10:45:47 -0300 Subject: V4L/DVB (7051): Cleans up error handling on or51xxx_attach state is already NULL. Reviewed-by: Trent Piepho Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/or51132.c | 6 +----- drivers/media/dvb/frontends/or51211.c | 6 +----- 2 files changed, 2 insertions(+), 10 deletions(-) diff --git a/drivers/media/dvb/frontends/or51132.c b/drivers/media/dvb/frontends/or51132.c index b314a1f2deed..1d2d28ce823d 100644 --- a/drivers/media/dvb/frontends/or51132.c +++ b/drivers/media/dvb/frontends/or51132.c @@ -564,7 +564,7 @@ struct dvb_frontend* or51132_attach(const struct or51132_config* config, /* Allocate memory for the internal state */ state = kmalloc(sizeof(struct or51132_state), GFP_KERNEL); if (state == NULL) - goto error; + return NULL; /* Setup the state */ state->config = config; @@ -576,10 +576,6 @@ struct dvb_frontend* or51132_attach(const struct or51132_config* config, memcpy(&state->frontend.ops, &or51132_ops, sizeof(struct dvb_frontend_ops)); state->frontend.demodulator_priv = state; return &state->frontend; - -error: - kfree(state); - return NULL; } static struct dvb_frontend_ops or51132_ops = { diff --git a/drivers/media/dvb/frontends/or51211.c b/drivers/media/dvb/frontends/or51211.c index f02bd9445955..6a6b0d727c6f 100644 --- a/drivers/media/dvb/frontends/or51211.c +++ b/drivers/media/dvb/frontends/or51211.c @@ -529,7 +529,7 @@ struct dvb_frontend* or51211_attach(const struct or51211_config* config, /* Allocate memory for the internal state */ state = kmalloc(sizeof(struct or51211_state), GFP_KERNEL); if (state == NULL) - goto error; + return NULL; /* Setup the state */ state->config = config; @@ -541,10 +541,6 @@ struct dvb_frontend* or51211_attach(const struct or51211_config* config, memcpy(&state->frontend.ops, &or51211_ops, sizeof(struct dvb_frontend_ops)); state->frontend.demodulator_priv = state; return &state->frontend; - -error: - kfree(state); - return NULL; } static struct dvb_frontend_ops or51211_ops = { -- cgit v1.2.3-59-g8ed1b From ed73683f06475531fb39e7ae9afe3011e4c5f8c1 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 19 Jan 2008 17:41:04 -0300 Subject: V4L/DVB (7052): tda18271: when tuning digital, the analog demod must be tri-stated Call analog_ops.standby during tda18271_set_params, to put the tda8295 in tri-state when tuning digital channels. Otherwise the tda8295 will interfere with the signal coming from the tda18271 into the digital demodulator. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda18271-fe.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/frontends/tda18271-fe.c b/drivers/media/dvb/frontends/tda18271-fe.c index dd3657e459b1..dfe72aaec380 100644 --- a/drivers/media/dvb/frontends/tda18271-fe.c +++ b/drivers/media/dvb/frontends/tda18271-fe.c @@ -836,7 +836,6 @@ static int tda18271_set_params(struct dvb_frontend *fe, priv->mode = TDA18271_DIGITAL; - /* see table 22 */ if (fe->ops.info.type == FE_ATSC) { switch (params->u.vsb.modulation) { case VSB_8: @@ -884,6 +883,10 @@ static int tda18271_set_params(struct dvb_frontend *fe, return -EINVAL; } + /* When tuning digital, the analog demod must be tri-stated */ + if (fe->ops.analog_ops.standby) + fe->ops.analog_ops.standby(fe); + ret = tda18271_tune(fe, sgIF * 1000, freq, bw, std, 0); if (ret < 0) -- cgit v1.2.3-59-g8ed1b From 8cb9329309cfc6c922f46bfe05ed6f40d5b1cb56 Mon Sep 17 00:00:00 2001 From: Luca Olivetti Date: Sun, 20 Jan 2008 17:56:43 -0300 Subject: V4L/DVB (7054): ansonic branded dvb-t usb stick support in the af9005 driver Marcos Melero (marcosmelero at gmail.com) reported he could make his dvb-t usb stick work with the af9005 driver by changing the device ids (10b9:6000). The stick is branded "Ansonic" (one of the brands of a spanish chain of supermarkets) with no other identification of the model. Since neither Marcos nor me know the OEM for the stick, in the attached patch I used Ansonic for the ids/description. Signed-off-by: Luca Olivetti Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/af9005.c | 7 ++++++- drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 2 ++ 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/dvb-usb/af9005.c b/drivers/media/dvb/dvb-usb/af9005.c index 7db6eee50e39..e7f76f515b4f 100644 --- a/drivers/media/dvb/dvb-usb/af9005.c +++ b/drivers/media/dvb/dvb-usb/af9005.c @@ -1026,6 +1026,7 @@ static int af9005_usb_probe(struct usb_interface *intf, static struct usb_device_id af9005_usb_table[] = { {USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9005)}, {USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_USB_XE)}, + {USB_DEVICE(USB_VID_ANSONIC, USB_PID_ANSONIC_DVBT_USB)}, {0}, }; @@ -1075,7 +1076,7 @@ static struct dvb_usb_device_properties af9005_properties = { .rc_key_map_size = 0, .rc_query = af9005_rc_query, - .num_device_descs = 2, + .num_device_descs = 3, .devices = { {.name = "Afatech DVB-T USB1.1 stick", .cold_ids = {&af9005_usb_table[0], NULL}, @@ -1085,6 +1086,10 @@ static struct dvb_usb_device_properties af9005_properties = { .cold_ids = {&af9005_usb_table[1], NULL}, .warm_ids = {NULL}, }, + {.name = "Ansonic DVB-T USB1.1 stick", + .cold_ids = {&af9005_usb_table[2], NULL}, + .warm_ids = {NULL}, + }, {NULL}, } }; diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index c94d993a6eff..aee5a6ef8217 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -15,6 +15,7 @@ #define USB_VID_ALCOR_MICRO 0x058f #define USB_VID_ALINK 0x05e3 #define USB_VID_ANCHOR 0x0547 +#define USB_VID_ANSONIC 0x10b9 #define USB_VID_ANUBIS_ELECTRONIC 0x10fd #define USB_VID_AVERMEDIA 0x07ca #define USB_VID_COMPRO 0x185b @@ -53,6 +54,7 @@ #define USB_PID_ADSTECH_USB2_WARM 0xa334 #define USB_PID_AFATECH_AF9005 0x9020 #define USB_VID_ALINK_DTU 0xf170 +#define USB_PID_ANSONIC_DVBT_USB 0x6000 #define USB_PID_AVERMEDIA_DVBT_USB_COLD 0x0001 #define USB_PID_AVERMEDIA_DVBT_USB_WARM 0x0002 #define USB_PID_AVERMEDIA_DVBT_USB2_COLD 0xa800 -- cgit v1.2.3-59-g8ed1b From 0f2ce9834246519e483e89dbc7225fe1fcbd30a8 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 21 Jan 2008 10:55:37 -0300 Subject: V4L/DVB (7055): make tuner names consistent with standard cases Change TDA9887 to tda9887. TDA8290 shall reflect the actual hardware present in its name, ie: tda8295+18271 tda8290+8275a Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tda8290.c | 8 ++------ drivers/media/video/tda9887.c | 2 +- 2 files changed, 3 insertions(+), 7 deletions(-) diff --git a/drivers/media/video/tda8290.c b/drivers/media/video/tda8290.c index 3e593a3d9031..55bc89a6f069 100644 --- a/drivers/media/video/tda8290.c +++ b/drivers/media/video/tda8290.c @@ -645,9 +645,6 @@ static int tda8295_probe(struct tuner_i2c_props *i2c_props) } static struct analog_demod_ops tda8290_ops = { - .info = { - .name = "TDA8290", - }, .set_params = tda8290_set_params, .has_signal = tda8290_has_signal, .standby = tda8290_standby, @@ -656,9 +653,6 @@ static struct analog_demod_ops tda8290_ops = { }; static struct analog_demod_ops tda8295_ops = { - .info = { - .name = "TDA8295", - }, .set_params = tda8295_set_params, .has_signal = tda8295_has_signal, .standby = tda8295_standby, @@ -731,6 +725,8 @@ struct dvb_frontend *tda829x_attach(struct dvb_frontend *fe, } tuner_info("type set to %s\n", name); + fe->ops.analog_ops.info.name = name; + if (priv->ver & TDA8290) { tda8290_init_tuner(fe); tda8290_init_if(fe); diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c index d3aabe2d146b..106c93b8203f 100644 --- a/drivers/media/video/tda9887.c +++ b/drivers/media/video/tda9887.c @@ -650,7 +650,7 @@ static void tda9887_release(struct dvb_frontend *fe) static struct analog_demod_ops tda9887_ops = { .info = { - .name = "TDA9887", + .name = "tda9887", }, .set_params = tda9887_set_params, .standby = tda9887_standby, -- cgit v1.2.3-59-g8ed1b From 1641002bf56c1da265f2c49ea1c29baba997e63b Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 21 Jan 2008 12:01:34 -0300 Subject: V4L/DVB (7056): tuner: suppress obsolete tuner i2c address warning for XC5000 tuners We already know that the XC5000 tuner can only be located at i2c address 0x61, 0x62, 0x63 or 0x64 We shouldn't display this warning if the XC5000 tuner is present. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tuner-core.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 8e406b168d71..ba538f6fbcc3 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -297,6 +297,12 @@ static void tuner_i2c_address_check(struct tuner *t) ((t->i2c->addr < 0x64) || (t->i2c->addr > 0x6f))) return; + /* We already know that the XC5000 can only be located at + * i2c address 0x61, 0x62, 0x63 or 0x64 */ + if ((t->type == TUNER_XC5000) && + ((t->i2c->addr <= 0x64)) && (t->i2c->addr >= 0x61)) + return; + tuner_warn("====================== WARNING! ======================\n"); tuner_warn("Support for tuners in i2c address range 0x64 thru 0x6f\n"); tuner_warn("will soon be dropped. This message indicates that your\n"); -- cgit v1.2.3-59-g8ed1b From 9121106a7f149f9702ed7c2ac0d86e9feb54ede8 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Tue, 22 Jan 2008 01:00:33 -0300 Subject: V4L/DVB (7058): IR corrections for the Pinnacle 800i IR corrections for the Pinnacle 800i Signed-off-by: Steven Toth Signed-off-by: Chaogui Zhang Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/ir-keymaps.c | 35 +++++++++++++++++++++++++++++++++++ drivers/media/video/cx88/cx88-input.c | 6 +++++- include/media/ir-common.h | 1 + 3 files changed, 41 insertions(+), 1 deletion(-) diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c index ee2c69e3152a..a4a937c90534 100644 --- a/drivers/media/common/ir-keymaps.c +++ b/drivers/media/common/ir-keymaps.c @@ -1849,6 +1849,41 @@ IR_KEYTAB_TYPE ir_codes_fusionhdtv_mce[IR_KEYTAB_SIZE] = { EXPORT_SYMBOL_GPL(ir_codes_fusionhdtv_mce); +/* Pinnacle PCTV HD 800i mini remote */ +IR_KEYTAB_TYPE ir_codes_pinnacle_pctv_hd[IR_KEYTAB_SIZE] = { + + [0x0f] = KEY_1, + [0x15] = KEY_2, + [0x10] = KEY_3, + [0x18] = KEY_4, + [0x1b] = KEY_5, + [0x1e] = KEY_6, + [0x11] = KEY_7, + [0x21] = KEY_8, + [0x12] = KEY_9, + [0x27] = KEY_0, + + [0x24] = KEY_ZOOM, + [0x2a] = KEY_SUBTITLE, + + [0x00] = KEY_MUTE, + [0x01] = KEY_ENTER, /* Pinnacle Logo */ + [0x39] = KEY_POWER, + + [0x03] = KEY_VOLUMEUP, + [0x09] = KEY_VOLUMEDOWN, + [0x06] = KEY_CHANNELUP, + [0x0c] = KEY_CHANNELDOWN, + + [0x2d] = KEY_REWIND, + [0x30] = KEY_PLAYPAUSE, + [0x33] = KEY_FASTFORWARD, + [0x3c] = KEY_STOP, + [0x36] = KEY_RECORD, + [0x3f] = KEY_EPG, /* Labeled "?" */ +}; +EXPORT_SYMBOL_GPL(ir_codes_pinnacle_pctv_hd); + /* * Igor Kuznetsov * Andrey J. Melnikov diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c index f79a1c77414c..bb0911b4d2f6 100644 --- a/drivers/media/video/cx88/cx88-input.c +++ b/drivers/media/video/cx88/cx88-input.c @@ -224,7 +224,6 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1: case CX88_BOARD_HAUPPAUGE_HVR1100: case CX88_BOARD_HAUPPAUGE_HVR3000: - case CX88_BOARD_PINNACLE_PCTV_HD_800i: ir_codes = ir_codes_hauppauge_new; ir_type = IR_TYPE_RC5; ir->sampling = 1; @@ -306,6 +305,11 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) ir->mask_keycode = 0xfa; ir->polling = 50; /* ms */ break; + case CX88_BOARD_PINNACLE_PCTV_HD_800i: + ir_codes = ir_codes_pinnacle_pctv_hd; + ir_type = IR_TYPE_RC5; + ir->sampling = 1; + break; } if (NULL == ir_codes) { diff --git a/include/media/ir-common.h b/include/media/ir-common.h index 9c2fc09a7133..831547d79683 100644 --- a/include/media/ir-common.h +++ b/include/media/ir-common.h @@ -141,6 +141,7 @@ extern IR_KEYTAB_TYPE ir_codes_encore_enltv[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_tt_1500[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_fusionhdtv_mce[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_behold[IR_KEYTAB_SIZE]; +extern IR_KEYTAB_TYPE ir_codes_pinnacle_pctv_hd[IR_KEYTAB_SIZE]; #endif -- cgit v1.2.3-59-g8ed1b From 72e04f720f23cfa8d4400d832784f3a424379227 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Tue, 22 Jan 2008 01:03:10 -0300 Subject: V4L/DVB (7059): cx88: Ensure the tuner is reset correctly Previous patches assume the tuner was on a different gpio. This patch corrects this. Signed-off-by: Steven Toth Signed-off-by: Chaogui Zhang Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88-cards.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index 254290975cdb..e6b7f518c56e 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1893,12 +1893,10 @@ int cx88_tuner_callback(void *priv, int command, int arg) switch(core->boardnr) { case CX88_BOARD_PINNACLE_PCTV_HD_800i: if(command == 0) { /* This is the reset command from xc5000 */ - /* Reset XC5000 tuner via GPIO pin #2 */ - cx_set(MO_GP0_IO, 0x00000400); - cx_clear(MO_GP0_IO, 0x00000004); - mdelay(200); - cx_set(MO_GP0_IO, 0x00000004); - mdelay(200); + /* Reset XC5000 tuner via SYS_RSTO_pin */ + cx_write(MO_SRST_IO, 0); + msleep(10); + cx_write(MO_SRST_IO, 1); return 0; } else { -- cgit v1.2.3-59-g8ed1b From ed086314f4e41eb90a9107c7fb2737230686f668 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 24 Jan 2008 06:59:20 -0300 Subject: V4L/DVB (7060): em28xx: remove has_tuner has_tuner flag doesn't make much sense, since tuner_type=TUNER_ABSENT means the same thing. Having two ways to say that a tuner is not present is not nice, since it may lead to bad setups. In fact, with the previous code, if a device were using has_tuner=0, but the user forces a tuner, with modprobe option tuner=type, the modprobe option won't work. Also, tveeprom returns TUNER_ABSENT, when tuner is unknown or absent. So, with the previous logic, in this case, the driver should set has_tuner=0, or has_tuner=1 otherwise. Instead of adding several additional tests and setups, better just to remove .has_tuner. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 29 +++++++---------------------- drivers/media/video/em28xx/em28xx-video.c | 5 +++-- drivers/media/video/em28xx/em28xx.h | 2 -- 3 files changed, 10 insertions(+), 26 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 368a766eb802..2159d0160df2 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -78,7 +78,6 @@ struct em28xx_board em28xx_boards[] = { .is_em2800 = 1, .vchannels = 2, .tda9887_conf = TDA9887_PRESENT, - .has_tuner = 1, .decoder = EM28XX_SAA7113, .input = { { .type = EM28XX_VMUX_COMPOSITE1, @@ -93,13 +92,14 @@ struct em28xx_board em28xx_boards[] = { [EM2820_BOARD_UNKNOWN] = { .name = "Unknown EM2750/28xx video grabber", .is_em2800 = 0, + .tuner_type = TUNER_ABSENT, }, [EM2820_BOARD_KWORLD_PVRTV2800RF] = { .name = "Kworld PVR TV 2800 RF", .is_em2800 = 0, .vchannels = 2, + .tuner_type = TUNER_TEMIC_PAL, .tda9887_conf = TDA9887_PRESENT, - .has_tuner = 1, .decoder = EM28XX_SAA7113, .input = { { .type = EM28XX_VMUX_COMPOSITE1, @@ -116,7 +116,6 @@ struct em28xx_board em28xx_boards[] = { .vchannels = 3, .tuner_type = TUNER_LG_PAL_NEW_TAPC, .tda9887_conf = TDA9887_PRESENT, - .has_tuner = 1, .decoder = EM28XX_SAA7113, .input = { { .type = EM28XX_VMUX_TELEVISION, @@ -137,7 +136,6 @@ struct em28xx_board em28xx_boards[] = { .vchannels = 3, .tuner_type = TUNER_LG_PAL_NEW_TAPC, .tda9887_conf = TDA9887_PRESENT, - .has_tuner = 1, .decoder = EM28XX_SAA7113, .input = { { .type = EM28XX_VMUX_TELEVISION, @@ -160,7 +158,6 @@ struct em28xx_board em28xx_boards[] = { .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE| TDA9887_PORT2_ACTIVE, - .has_tuner = 1, .decoder = EM28XX_TVP5150, .has_msp34xx = 1, /*FIXME: S-Video not tested */ @@ -180,7 +177,6 @@ struct em28xx_board em28xx_boards[] = { .vchannels = 3, .tda9887_conf = TDA9887_PRESENT, .tuner_type = TUNER_XC2028, - .has_tuner = 1, .mts_firmware = 1, .decoder = EM28XX_TVP5150, .input = { { @@ -202,7 +198,6 @@ struct em28xx_board em28xx_boards[] = { .vchannels = 3, .tda9887_conf = TDA9887_PRESENT, .tuner_type = TUNER_XC2028, - .has_tuner = 1, .mts_firmware = 1, .has_12mhz_i2s = 1, .decoder = EM28XX_TVP5150, @@ -227,7 +222,6 @@ struct em28xx_board em28xx_boards[] = { .name = "Terratec Hybrid XS", .vchannels = 3, .tda9887_conf = TDA9887_PRESENT, - .has_tuner = 1, .tuner_type = TUNER_XC2028, .decoder = EM28XX_TVP5150, .input = { { @@ -251,7 +245,6 @@ struct em28xx_board em28xx_boards[] = { .name = "Terratec Prodigy XS", .vchannels = 3, .tda9887_conf = TDA9887_PRESENT, - .has_tuner = 1, .tuner_type = TUNER_XC2028, .decoder = EM28XX_TVP5150, .input = { { @@ -275,7 +268,6 @@ struct em28xx_board em28xx_boards[] = { .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE | TDA9887_PORT2_ACTIVE, - .has_tuner = 1, .max_range_640_480 = 1, .decoder = EM28XX_SAA7114, @@ -299,7 +291,6 @@ struct em28xx_board em28xx_boards[] = { .vchannels = 3, .tuner_type = TUNER_LG_PAL_NEW_TAPC, .tda9887_conf = TDA9887_PRESENT, - .has_tuner = 1, .decoder = EM28XX_SAA7113, .input = { { .type = EM28XX_VMUX_TELEVISION, @@ -321,7 +312,6 @@ struct em28xx_board em28xx_boards[] = { .vchannels = 3, .tuner_type = TUNER_LG_PAL_NEW_TAPC, .tda9887_conf = TDA9887_PRESENT, - .has_tuner = 1, .decoder = EM28XX_SAA7113, .input = { { .type = EM28XX_VMUX_TELEVISION, @@ -343,7 +333,6 @@ struct em28xx_board em28xx_boards[] = { .vchannels = 3, .tuner_type = TUNER_PHILIPS_ATSC, .tda9887_conf = TDA9887_PRESENT, - .has_tuner = 1, .decoder = EM28XX_SAA7113, .input = { { .type = EM28XX_VMUX_TELEVISION, @@ -362,7 +351,7 @@ struct em28xx_board em28xx_boards[] = { [EM2820_BOARD_PINNACLE_DVC_90] = { .name = "Pinnacle Dazzle DVC 90/DVC 100", .vchannels = 3, - .has_tuner = 0, + .tuner_type = TUNER_ABSENT, .decoder = EM28XX_SAA7113, .input = { { .type = EM28XX_VMUX_COMPOSITE1, @@ -380,7 +369,6 @@ struct em28xx_board em28xx_boards[] = { .vchannels = 3, .tuner_type = TUNER_LG_PAL_NEW_TAPC, .tda9887_conf = TDA9887_PRESENT, - .has_tuner = 1, .decoder = EM28XX_SAA7113, .input = { { .type = EM28XX_VMUX_TELEVISION, @@ -400,7 +388,7 @@ struct em28xx_board em28xx_boards[] = { .name = "Pixelview Prolink PlayTV USB 2.0", .vchannels = 3, .tda9887_conf = TDA9887_PRESENT, - .has_tuner = 1, + .tuner_type = TUNER_YMEC_TVF_5533MF, .decoder = EM28XX_SAA7113, .input = { { .type = EM28XX_VMUX_TELEVISION, @@ -551,7 +539,7 @@ static void em28xx_config_tuner(struct em28xx *dev) struct tuner_setup tun_setup; struct v4l2_frequency f; - if (!dev->has_tuner) + if (dev->tuner_type == TUNER_ABSENT) return; tun_setup.mode_mask = T_ANALOG_TV | T_RADIO; @@ -668,7 +656,6 @@ static int em28xx_hint_board(struct em28xx *dev) static void em28xx_set_model(struct em28xx *dev) { dev->is_em2800 = em28xx_boards[dev->model].is_em2800; - dev->has_tuner = em28xx_boards[dev->model].has_tuner; dev->has_msp34xx = em28xx_boards[dev->model].has_msp34xx; dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf; dev->decoder = em28xx_boards[dev->model].decoder; @@ -676,9 +663,6 @@ static void em28xx_set_model(struct em28xx *dev) dev->analog_gpio = em28xx_boards[dev->model].analog_gpio; dev->has_12mhz_i2s = em28xx_boards[dev->model].has_12mhz_i2s; dev->max_range_640_480 = em28xx_boards[dev->model].max_range_640_480; - - if (!em28xx_boards[dev->model].has_tuner) - dev->tuner_type = UNSET; } /* ----------------------------------------------------------------------- */ @@ -745,6 +729,7 @@ void em28xx_card_setup(struct em28xx *dev) tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata); dev->tuner_type = tv.tuner_type; + if (tv.audio_processor == AUDIO_CHIP_MSP34XX) { dev->i2s_speed = 2048000; dev->has_msp34xx = 1; @@ -777,7 +762,7 @@ void em28xx_card_setup(struct em28xx *dev) request_module("saa7115"); if (dev->decoder == EM28XX_TVP5150) request_module("tvp5150"); - if (dev->has_tuner) + if (dev->tuner_type != TUNER_ABSENT) request_module("tuner"); #endif diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index de95ca874241..a0c334672488 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -38,6 +38,7 @@ #include "em28xx.h" #include #include +#include #define DRIVER_AUTHOR "Ludovico Cavedon , " \ "Markus Rechberger , " \ @@ -928,7 +929,7 @@ static int vidioc_querycap(struct file *file, void *priv, V4L2_CAP_AUDIO | V4L2_CAP_READWRITE | V4L2_CAP_STREAMING; - if (dev->has_tuner) + if (dev->tuner_type != TUNER_ABSENT) cap->capabilities |= V4L2_CAP_TUNER; return 0; @@ -1900,7 +1901,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, em28xx_errdev("cannot allocate video_device.\n"); goto fail_unreg; } - if (dev->has_tuner) + if (dev->tuner_type != TUNER_ABSENT) dev->vdev->type |= VID_TYPE_TUNER; /* register v4l2 video video_device */ diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 3ef80d8b566e..f3bad0c1c517 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -161,7 +161,6 @@ struct em28xx_board { unsigned int tda9887_conf; unsigned int is_em2800:1; - unsigned int has_tuner:1; unsigned int has_msp34xx:1; unsigned int mts_firmware:1; unsigned int has_12mhz_i2s:1; @@ -226,7 +225,6 @@ struct em28xx { int devno; /* marks the number of this device */ unsigned int analog_gpio; unsigned int is_em2800:1; - unsigned int has_tuner:1; unsigned int has_msp34xx:1; unsigned int has_tda9887:1; unsigned int stream_on:1; /* Locks streams */ -- cgit v1.2.3-59-g8ed1b From 8bf5e5ca394441e56f68300dc4e7b26b79ddfe0b Mon Sep 17 00:00:00 2001 From: Tobias Lorenz Date: Fri, 25 Jan 2008 04:19:48 -0300 Subject: V4L/DVB (7061): radio-si470x: Some cleanups - code reordered to avoid function prototypes - switch/case defaults are now more user-friendly - unified comment style - applied all checkpatch.pl v1.12 suggestions except the warning about the too long lines with bit comments - renamed FMRADIO to RADIO to cut line length (checkpatch.pl) Signed-off-by: Tobias Lorenz Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-si470x.c | 859 ++++++++++++++++++------------------- 1 file changed, 415 insertions(+), 444 deletions(-) diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c index ccb167a1acdc..d54fe6405351 100644 --- a/drivers/media/radio/radio-si470x.c +++ b/drivers/media/radio/radio-si470x.c @@ -5,7 +5,7 @@ * - Silicon Labs USB FM Radio Reference Design * - ADS/Tech FM Radio Receiver (formerly Instant FM Music) (RDX-155-EF) * - * Copyright (c) 2007 Tobias Lorenz + * Copyright (c) 2008 Tobias Lorenz * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -29,7 +29,7 @@ * Version 1.0.0 * - First working version * 2008-01-13 Tobias Lorenz - * Version 1.0.1 + * Version 1.0.1 * - Improved error handling, every function now returns errno * - Improved multi user access (start/mute/stop) * - Channel doesn't get lost anymore after start/mute/stop @@ -47,6 +47,14 @@ * - check for firmware version 15 * - code order and prototypes still remain the same * - spacing and bottom of band codes remain the same + * 2008-01-16 Tobias Lorenz + * Version 1.0.3 + * - code reordered to avoid function prototypes + * - switch/case defaults are now more user-friendly + * - unified comment style + * - applied all checkpatch.pl v1.12 suggestions + * except the warning about the too long lines with bit comments + * - renamed FMRADIO to RADIO to cut line length (checkpatch.pl) * * ToDo: * - check USB Vendor/Product ID for ADS/Tech FM Radio Receiver @@ -55,13 +63,14 @@ * - add firmware download/update support * - add possibility to switch off RDS * - RDS support: interrupt mode, instead of polling - * - add LED status output + * - add LED status output (check if that's not already done in firmware) */ + /* driver definitions */ #define DRIVER_AUTHOR "Tobias Lorenz " #define DRIVER_NAME "radio-si470x" -#define DRIVER_VERSION KERNEL_VERSION(1, 0, 2) +#define DRIVER_VERSION KERNEL_VERSION(1, 0, 3) #define DRIVER_CARD "Silicon Labs Si470x FM Radio Receiver" #define DRIVER_DESC "USB radio driver for Si470x FM Radio Receivers" @@ -80,6 +89,21 @@ #include +/* USB Device ID List */ +static struct usb_device_id si470x_usb_driver_id_table[] = { + /* Silicon Labs USB FM Radio Reference Design */ + { USB_DEVICE_AND_INTERFACE_INFO(0x10c4, 0x818a, USB_CLASS_HID, 0, 0) }, + /* Terminating entry */ + { } +}; +MODULE_DEVICE_TABLE(usb, si470x_usb_driver_id_table); + + + +/************************************************************************** + * Module Parameters + **************************************************************************/ + /* Radio Nr */ static int radio_nr = -1; module_param(radio_nr, int, 0); @@ -145,8 +169,8 @@ MODULE_PARM_DESC(rds_poll_time, "RDS poll time (ms): *40*"); /************************************************************************** * Register Definitions **************************************************************************/ -#define FMRADIO_REGISTER_SIZE 2 /* 16 register bit width */ -#define FMRADIO_REGISTER_NUM 16 /* DEVICEID ... RDSD */ +#define RADIO_REGISTER_SIZE 2 /* 16 register bit width */ +#define RADIO_REGISTER_NUM 16 /* DEVICEID ... RDSD */ #define RDS_REGISTER_NUM 6 /* STATUSRSSI ... RDSD */ #define DEVICEID 0 /* Device ID */ @@ -236,23 +260,23 @@ MODULE_PARM_DESC(rds_poll_time, "RDS poll time (ms): *40*"); /************************************************************************** - * USB HID reports + * USB HID Reports **************************************************************************/ /* Reports 1-16 give direct read/write access to the 16 Si470x registers */ /* with the (REPORT_ID - 1) corresponding to the register address across USB */ /* endpoint 0 using GET_REPORT and SET_REPORT */ -#define REGISTER_REPORT_SIZE (FMRADIO_REGISTER_SIZE + 1) +#define REGISTER_REPORT_SIZE (RADIO_REGISTER_SIZE + 1) #define REGISTER_REPORT(reg) ((reg) + 1) /* Report 17 gives direct read/write access to the entire Si470x register */ /* map across endpoint 0 using GET_REPORT and SET_REPORT */ -#define ENTIRE_REPORT_SIZE (FMRADIO_REGISTER_NUM * FMRADIO_REGISTER_SIZE + 1) +#define ENTIRE_REPORT_SIZE (RADIO_REGISTER_NUM * RADIO_REGISTER_SIZE + 1) #define ENTIRE_REPORT 17 /* Report 18 is used to send the lowest 6 Si470x registers up the HID */ /* interrupt endpoint 1 to Windows every 20 milliseconds for status */ -#define RDS_REPORT_SIZE (RDS_REGISTER_NUM * FMRADIO_REGISTER_SIZE + 1) +#define RDS_REPORT_SIZE (RDS_REGISTER_NUM * RADIO_REGISTER_SIZE + 1) #define RDS_REPORT 18 /* Report 19: LED state */ @@ -281,12 +305,12 @@ MODULE_PARM_DESC(rds_poll_time, "RDS poll time (ms): *40*"); /************************************************************************** - * software/hardware versions + * Software/Hardware Versions **************************************************************************/ -#define FMRADIO_SW_VERSION_NOT_BOOTLOADABLE 6 -#define FMRADIO_SW_VERSION 7 -#define FMRADIO_SW_VERSION_CURRENT 15 -#define FMRADIO_HW_VERSION 1 +#define RADIO_SW_VERSION_NOT_BOOTLOADABLE 6 +#define RADIO_SW_VERSION 7 +#define RADIO_SW_VERSION_CURRENT 15 +#define RADIO_HW_VERSION 1 #define SCRATCH_PAGE_SW_VERSION 1 #define SCRATCH_PAGE_HW_VERSION 2 @@ -294,7 +318,7 @@ MODULE_PARM_DESC(rds_poll_time, "RDS poll time (ms): *40*"); /************************************************************************** - * LED State definitions + * LED State Definitions **************************************************************************/ #define LED_COMMAND 0x35 @@ -310,7 +334,7 @@ MODULE_PARM_DESC(rds_poll_time, "RDS poll time (ms): *40*"); /************************************************************************** - * Stream State definitions + * Stream State Definitions **************************************************************************/ #define STREAM_COMMAND 0x36 #define STREAM_VIDPID 0x00 @@ -319,16 +343,16 @@ MODULE_PARM_DESC(rds_poll_time, "RDS poll time (ms): *40*"); /************************************************************************** - * bootloader / flash commands + * Bootloader / Flash Commands **************************************************************************/ -/* Unique ID sent to bootloader and required to put into a bootload state */ +/* unique id sent to bootloader and required to put into a bootload state */ #define UNIQUE_BL_ID 0x34 -/* Mask for the flash data */ +/* mask for the flash data */ #define FLASH_DATA_MASK 0x55 -/* Bootloader commands */ +/* bootloader commands */ #define GET_SW_VERSION_COMMAND 0x00 #define SET_PAGE_COMMAND 0x01 #define ERASE_PAGE_COMMAND 0x02 @@ -339,12 +363,12 @@ MODULE_PARM_DESC(rds_poll_time, "RDS poll time (ms): *40*"); #define GET_HW_VERSION_COMMAND 0x07 #define BLANK 0xff -/* Bootloader command responses */ +/* bootloader command responses */ #define COMMAND_OK 0x01 #define COMMAND_FAILED 0x02 #define COMMAND_PENDING 0x03 -/* Buffer sizes */ +/* buffer sizes */ #define COMMAND_BUFFER_SIZE 4 #define RESPONSE_BUFFER_SIZE 2 #define FLASH_BUFFER_SIZE 64 @@ -353,10 +377,12 @@ MODULE_PARM_DESC(rds_poll_time, "RDS poll time (ms): *40*"); /************************************************************************** - * Driver private definitions + * General Driver Definitions **************************************************************************/ -/* private data */ +/* + * si470x_device - private data + */ struct si470x_device { /* reference to USB and video device */ struct usb_device *usbdev; @@ -369,12 +395,12 @@ struct si470x_device { unsigned char buf[64]; /* Silabs internal registers (0..15) */ - unsigned short registers[FMRADIO_REGISTER_NUM]; + unsigned short registers[RADIO_REGISTER_NUM]; /* RDS receive buffer */ struct work_struct work; struct timer_list timer; - spinlock_t lock; + spinlock_t lock; /* buffer locking */ unsigned char *buffer; unsigned int buf_size; unsigned int rd_index; @@ -385,177 +411,20 @@ struct si470x_device { int data_available_for_read; }; -/* register acccess functions */ -static int si470x_get_report(struct si470x_device *radio, int size); -static int si470x_set_report(struct si470x_device *radio, int size); -static int si470x_get_register(struct si470x_device *radio, int regnr); -static int si470x_set_register(struct si470x_device *radio, int regnr); -static int si470x_get_all_registers(struct si470x_device *radio); -static int si470x_get_rds_registers(struct si470x_device *radio); - -/* high-level functions */ -static int si470x_start(struct si470x_device *radio); -static int si470x_stop(struct si470x_device *radio); -static int si470x_set_chan(struct si470x_device *radio, int chan); -static int si470x_get_freq(struct si470x_device *radio); -static int si470x_set_freq(struct si470x_device *radio, int freq); - -/* RDS functions */ -static void si470x_rds(struct si470x_device *radio); -static void si470x_timer(unsigned long data); -static void si470x_work(struct work_struct *work); - - - -/************************************************************************** - * USB interface definitions - **************************************************************************/ - -/* USB device ID list (Vendor, Product, Class, SubClass, Protocol) */ -static struct usb_device_id si470x_usb_driver_id_table[] = { - /* Silicon Labs USB FM Radio Reference Design */ - { USB_DEVICE_AND_INTERFACE_INFO(0x10c4, 0x818a, USB_CLASS_HID, 0, 0) }, - /* Terminating entry */ - { } -}; -MODULE_DEVICE_TABLE (usb, si470x_usb_driver_id_table); - -/* USB driver functions */ -static int si470x_usb_driver_probe(struct usb_interface *intf, - const struct usb_device_id *id); -static void si470x_usb_driver_disconnect(struct usb_interface *intf); - -/* USB driver interface */ -static struct usb_driver si470x_usb_driver = { - .name = DRIVER_NAME, - .probe = si470x_usb_driver_probe, - .disconnect = si470x_usb_driver_disconnect, - .id_table = si470x_usb_driver_id_table, -}; - - - -/************************************************************************** - * Video4Linux interface definitions - **************************************************************************/ -/* The frequency is set in units of 62.5 Hz when using V4L2_TUNER_CAP_LOW, */ -/* 62.5 kHz otherwise. */ -/* The tuner is able to have a channel spacing of 50, 100 or 200 kHz. */ -/* tuner->capability is therefore set to V4L2_TUNER_CAP_LOW */ -/* The FREQ_MUL is then: 1 MHz / 62.5 Hz = 16000 */ +/* + * The frequency is set in units of 62.5 Hz when using V4L2_TUNER_CAP_LOW, + * 62.5 kHz otherwise. + * The tuner is able to have a channel spacing of 50, 100 or 200 kHz. + * tuner->capability is therefore set to V4L2_TUNER_CAP_LOW + * The FREQ_MUL is then: 1 MHz / 62.5 Hz = 16000 + */ #define FREQ_MUL (1000000 / 62.5) -/* File operations functions */ -static ssize_t si470x_fops_read(struct file *file, char __user *buf, - size_t count, loff_t *ppos); -static unsigned int si470x_fops_poll(struct file *file, - struct poll_table_struct *pts); -static int si470x_fops_open(struct inode *inode, struct file *file); -static int si470x_fops_release(struct inode *inode, struct file *file); - -/* File operations interface */ -static const struct file_operations si470x_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .read = si470x_fops_read, - .poll = si470x_fops_poll, - .ioctl = video_ioctl2, - .compat_ioctl = v4l_compat_ioctl32, - .open = si470x_fops_open, - .release = si470x_fops_release, -}; - -/* Video device functions */ -static int si470x_vidioc_querycap(struct file *file, void *priv, - struct v4l2_capability *capability); -static int si470x_vidioc_g_input(struct file *file, void *priv, - unsigned int *i); -static int si470x_vidioc_s_input(struct file *file, void *priv, - unsigned int i); -static int si470x_vidioc_queryctrl(struct file *file, void *priv, - struct v4l2_queryctrl *qc); -static int si470x_vidioc_g_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl); -static int si470x_vidioc_s_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl); -static int si470x_vidioc_g_audio(struct file *file, void *priv, - struct v4l2_audio *audio); -static int si470x_vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *audio); -static int si470x_vidioc_g_tuner(struct file *file, void *priv, - struct v4l2_tuner *tuner); -static int si470x_vidioc_s_tuner(struct file *file, void *priv, - struct v4l2_tuner *tuner); -static int si470x_vidioc_g_frequency(struct file *file, void *priv, - struct v4l2_frequency *freq); -static int si470x_vidioc_s_frequency(struct file *file, void *priv, - struct v4l2_frequency *freq); - -/* Video device interface */ -static struct video_device si470x_viddev_template = { - .fops = &si470x_fops, - .name = DRIVER_NAME, - .type = VID_TYPE_TUNER, - .release = video_device_release, - .vidioc_querycap = si470x_vidioc_querycap, - .vidioc_g_input = si470x_vidioc_g_input, - .vidioc_s_input = si470x_vidioc_s_input, - .vidioc_queryctrl = si470x_vidioc_queryctrl, - .vidioc_g_ctrl = si470x_vidioc_g_ctrl, - .vidioc_s_ctrl = si470x_vidioc_s_ctrl, - .vidioc_g_audio = si470x_vidioc_g_audio, - .vidioc_s_audio = si470x_vidioc_s_audio, - .vidioc_g_tuner = si470x_vidioc_g_tuner, - .vidioc_s_tuner = si470x_vidioc_s_tuner, - .vidioc_g_frequency = si470x_vidioc_g_frequency, - .vidioc_s_frequency = si470x_vidioc_s_frequency, - .owner = THIS_MODULE, -}; - -/* Query control */ -static struct v4l2_queryctrl radio_queryctrl[] = { -/* HINT: the disabled controls are only here to satify kradio and such apps */ - { - .id = V4L2_CID_AUDIO_VOLUME, - .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Volume", - .minimum = 0, - .maximum = 15, - .step = 1, - .default_value = 15, - }, - { - .id = V4L2_CID_AUDIO_BALANCE, - .flags = V4L2_CTRL_FLAG_DISABLED, - }, - { - .id = V4L2_CID_AUDIO_BASS, - .flags = V4L2_CTRL_FLAG_DISABLED, - }, - { - .id = V4L2_CID_AUDIO_TREBLE, - .flags = V4L2_CTRL_FLAG_DISABLED, - }, - { - .id = V4L2_CID_AUDIO_MUTE, - .type = V4L2_CTRL_TYPE_BOOLEAN, - .name = "Mute", - .minimum = 0, - .maximum = 1, - .step = 1, - .default_value = 1, - }, - { - .id = V4L2_CID_AUDIO_LOUDNESS, - .flags = V4L2_CTRL_FLAG_DISABLED, - }, -}; - /************************************************************************** - * Driver private functions + * General Driver Functions **************************************************************************/ /* @@ -633,10 +502,10 @@ static int si470x_get_all_registers(struct si470x_device *radio) retval = si470x_get_report(radio, ENTIRE_REPORT_SIZE); if (retval >= 0) - for (regnr = 0; regnr < FMRADIO_REGISTER_NUM; regnr++) + for (regnr = 0; regnr < RADIO_REGISTER_NUM; regnr++) radio->registers[regnr] = - (radio->buf[regnr * FMRADIO_REGISTER_SIZE + 1] << 8) | - radio->buf[regnr * FMRADIO_REGISTER_SIZE + 2]; + (radio->buf[regnr * RADIO_REGISTER_SIZE + 1] << 8) | + radio->buf[regnr * RADIO_REGISTER_SIZE + 2]; return (retval < 0) ? -EINVAL : 0; } @@ -657,65 +526,13 @@ static int si470x_get_rds_registers(struct si470x_device *radio) usb_rcvctrlpipe(radio->usbdev, 1), radio->buf, RDS_REPORT_SIZE, &size, usb_timeout); - if (retval >= 0) { - for (regnr = 0; regnr < RDS_REGISTER_NUM; regnr++) { + if (retval >= 0) + for (regnr = 0; regnr < RDS_REGISTER_NUM; regnr++) radio->registers[STATUSRSSI + regnr] = - (radio->buf[regnr * FMRADIO_REGISTER_SIZE + 1] << 8) | - radio->buf[regnr * FMRADIO_REGISTER_SIZE + 2]; - } - } + (radio->buf[regnr * RADIO_REGISTER_SIZE + 1] << 8) | + radio->buf[regnr * RADIO_REGISTER_SIZE + 2]; - return (retval < 0) ? - EINVAL : 0; -} - - -/* - * si470x_start - switch on radio - */ -static int si470x_start(struct si470x_device *radio) -{ - int retval; - - /* powercfg */ - radio->registers[POWERCFG] = - POWERCFG_DMUTE | POWERCFG_ENABLE | POWERCFG_RDSM; - retval = si470x_set_register(radio, POWERCFG); - if (retval < 0) - return retval; - - /* sysconfig 1 */ - radio->registers[SYSCONFIG1] = - SYSCONFIG1_DE | SYSCONFIG1_RDS; - retval = si470x_set_register(radio, SYSCONFIG1); - if (retval < 0) - return retval; - - /* sysconfig 2 */ - radio->registers[SYSCONFIG2] = - (0x3f << 8) | /* SEEKTH */ - (band << 6) | /* BAND */ - (space << 4) | /* SPACE */ - 15; /* VOLUME (max) */ - retval = si470x_set_register(radio, SYSCONFIG2); - if (retval < 0) - return retval; - - /* reset last channel */ - return si470x_set_chan(radio, - radio->registers[CHANNEL] & CHANNEL_CHAN); -} - - -/* - * si470x_stop - switch off radio - */ -static int si470x_stop(struct si470x_device *radio) -{ - /* powercfg */ - radio->registers[POWERCFG] &= ~POWERCFG_DMUTE; - /* POWERCFG_ENABLE has to automatically go low */ - radio->registers[POWERCFG] |= POWERCFG_ENABLE | POWERCFG_DISABLE; - return si470x_set_register(radio, POWERCFG); + return (retval < 0) ? -EINVAL : 0; } @@ -761,22 +578,22 @@ static int si470x_get_freq(struct si470x_device *radio) /* Spacing (kHz) */ switch (space) { - /* 0: 200 kHz (USA, Australia) */ - default: spacing = 0.200 * FREQ_MUL; break; - /* 1: 100 kHz (Europe, Japan) */ - case 1 : spacing = 0.100 * FREQ_MUL; break; - /* 2: 50 kHz */ - case 2 : spacing = 0.050 * FREQ_MUL; break; + /* 0: 200 kHz (USA, Australia) */ + case 0 : spacing = 0.200 * FREQ_MUL; break; + /* 1: 100 kHz (Europe, Japan) */ + case 1 : spacing = 0.100 * FREQ_MUL; break; + /* 2: 50 kHz */ + default: spacing = 0.050 * FREQ_MUL; break; }; /* Bottom of Band (MHz) */ switch (band) { - /* 0: 87.5 - 108 MHz (USA, Europe) */ - default: band_bottom = 87.5 * FREQ_MUL; break; - /* 1: 76 - 108 MHz (Japan wide band) */ - case 1 : band_bottom = 76 * FREQ_MUL; break; - /* 2: 76 - 90 MHz (Japan) */ - case 2 : band_bottom = 76 * FREQ_MUL; break; + /* 0: 87.5 - 108 MHz (USA, Europe) */ + case 0 : band_bottom = 87.5 * FREQ_MUL; break; + /* 1: 76 - 108 MHz (Japan wide band) */ + default: band_bottom = 76 * FREQ_MUL; break; + /* 2: 76 - 90 MHz (Japan) */ + case 2 : band_bottom = 76 * FREQ_MUL; break; }; /* read channel */ @@ -801,22 +618,22 @@ static int si470x_set_freq(struct si470x_device *radio, int freq) /* Spacing (kHz) */ switch (space) { - /* 0: 200 kHz (USA, Australia) */ - default: spacing = 0.200 * FREQ_MUL; break; - /* 1: 100 kHz (Europe, Japan) */ - case 1 : spacing = 0.100 * FREQ_MUL; break; - /* 2: 50 kHz */ - case 2 : spacing = 0.050 * FREQ_MUL; break; + /* 0: 200 kHz (USA, Australia) */ + case 0 : spacing = 0.200 * FREQ_MUL; break; + /* 1: 100 kHz (Europe, Japan) */ + case 1 : spacing = 0.100 * FREQ_MUL; break; + /* 2: 50 kHz */ + default: spacing = 0.050 * FREQ_MUL; break; }; /* Bottom of Band (MHz) */ switch (band) { - /* 0: 87.5 - 108 MHz (USA, Europe) */ - default: band_bottom = 87.5 * FREQ_MUL; break; - /* 1: 76 - 108 MHz (Japan wide band) */ - case 1 : band_bottom = 76 * FREQ_MUL; break; - /* 2: 76 - 90 MHz (Japan) */ - case 2 : band_bottom = 76 * FREQ_MUL; break; + /* 0: 87.5 - 108 MHz (USA, Europe) */ + case 0 : band_bottom = 87.5 * FREQ_MUL; break; + /* 1: 76 - 108 MHz (Japan wide band) */ + default: band_bottom = 76 * FREQ_MUL; break; + /* 2: 76 - 90 MHz (Japan) */ + case 2 : band_bottom = 76 * FREQ_MUL; break; }; /* Chan = [ Freq (Mhz) - Bottom of Band (MHz) ] / Spacing (kHz) */ @@ -826,6 +643,60 @@ static int si470x_set_freq(struct si470x_device *radio, int freq) } +/* + * si470x_start - switch on radio + */ +static int si470x_start(struct si470x_device *radio) +{ + int retval; + + /* powercfg */ + radio->registers[POWERCFG] = + POWERCFG_DMUTE | POWERCFG_ENABLE | POWERCFG_RDSM; + retval = si470x_set_register(radio, POWERCFG); + if (retval < 0) + return retval; + + /* sysconfig 1 */ + radio->registers[SYSCONFIG1] = + SYSCONFIG1_DE | SYSCONFIG1_RDS; + retval = si470x_set_register(radio, SYSCONFIG1); + if (retval < 0) + return retval; + + /* sysconfig 2 */ + radio->registers[SYSCONFIG2] = + (0x3f << 8) | /* SEEKTH */ + (band << 6) | /* BAND */ + (space << 4) | /* SPACE */ + 15; /* VOLUME (max) */ + retval = si470x_set_register(radio, SYSCONFIG2); + if (retval < 0) + return retval; + + /* reset last channel */ + return si470x_set_chan(radio, + radio->registers[CHANNEL] & CHANNEL_CHAN); +} + + +/* + * si470x_stop - switch off radio + */ +static int si470x_stop(struct si470x_device *radio) +{ + /* powercfg */ + radio->registers[POWERCFG] &= ~POWERCFG_DMUTE; + /* POWERCFG_ENABLE has to automatically go low */ + radio->registers[POWERCFG] |= POWERCFG_ENABLE | POWERCFG_DISABLE; + return si470x_set_register(radio, POWERCFG); +} + + + +/************************************************************************** + * RDS Driver Functions + **************************************************************************/ /* * si470x_rds - rds processing function @@ -854,26 +725,26 @@ static void si470x_rds(struct si470x_device *radio) for (blocknum = 0; blocknum < 4; blocknum++) { switch (blocknum) { - default: - bler = (radio->registers[STATUSRSSI] & - STATUSRSSI_BLERA) >> 9; - rds = radio->registers[RDSA]; - break; - case 1: - bler = (radio->registers[READCHAN] & - READCHAN_BLERB) >> 14; - rds = radio->registers[RDSB]; - break; - case 2: - bler = (radio->registers[READCHAN] & - READCHAN_BLERC) >> 12; - rds = radio->registers[RDSC]; - break; - case 3: - bler = (radio->registers[READCHAN] & - READCHAN_BLERD) >> 10; - rds = radio->registers[RDSD]; - break; + default: + bler = (radio->registers[STATUSRSSI] & + STATUSRSSI_BLERA) >> 9; + rds = radio->registers[RDSA]; + break; + case 1: + bler = (radio->registers[READCHAN] & + READCHAN_BLERB) >> 14; + rds = radio->registers[RDSB]; + break; + case 2: + bler = (radio->registers[READCHAN] & + READCHAN_BLERC) >> 12; + rds = radio->registers[RDSC]; + break; + case 3: + bler = (radio->registers[READCHAN] & + READCHAN_BLERD) >> 10; + rds = radio->registers[RDSD]; + break; }; /* Fill the V4L2 RDS buffer */ @@ -941,120 +812,20 @@ static void si470x_work(struct work_struct *work) /************************************************************************** - * USB interface functions + * File Operations Interface **************************************************************************/ /* - * si470x_usb_driver_probe - probe for the device + * si470x_fops_read - read RDS data */ -static int si470x_usb_driver_probe(struct usb_interface *intf, - const struct usb_device_id *id) +static ssize_t si470x_fops_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) { - struct si470x_device *radio; - - if (!(radio = kmalloc(sizeof(struct si470x_device), GFP_KERNEL))) - return -ENOMEM; - if (!(radio->videodev = video_device_alloc())) { - kfree(radio); - return -ENOMEM; - } - memcpy(radio->videodev, &si470x_viddev_template, - sizeof(si470x_viddev_template)); - radio->users = 0; - radio->usbdev = interface_to_usbdev(intf); - video_set_drvdata(radio->videodev, radio); - if (video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr)) { - printk(KERN_WARNING DRIVER_NAME - ": Could not register video device\n"); - video_device_release(radio->videodev); - kfree(radio); - return -EIO; - } - usb_set_intfdata(intf, radio); - - /* show some infos about the specific device */ - if (si470x_get_all_registers(radio) < 0) { - video_device_release(radio->videodev); - kfree(radio); - return -EIO; - } - printk(KERN_INFO DRIVER_NAME ": DeviceID=0x%4.4x ChipID=0x%4.4x\n", - radio->registers[DEVICEID], radio->registers[CHIPID]); - - /* check if firmware is current */ - if ((radio->registers[CHIPID] & CHIPID_FIRMWARE) - < FMRADIO_SW_VERSION_CURRENT) { - printk(KERN_WARNING DRIVER_NAME - ": This driver is known to work with chip version %d, " - "but the device has firmware %d. If you have some " - "trouble using this driver, please report to V4L ML " - "at video4linux-list@redhat.com\n", - radio->registers[CHIPID] & CHIPID_FIRMWARE, - FMRADIO_SW_VERSION_CURRENT); - } - - /* set initial frequency */ - si470x_set_freq(radio, 87.5 * FREQ_MUL); /* available in all regions */ - - /* rds initialization */ - radio->buf_size = rds_buf * 3; - if (NULL == (radio->buffer = kmalloc(radio->buf_size, GFP_KERNEL))) { - video_device_release(radio->videodev); - kfree(radio); - return -ENOMEM; - } - radio->block_count = 0; - radio->wr_index = 0; - radio->rd_index = 0; - radio->last_blocknum = 0xff; - init_waitqueue_head(&radio->read_queue); - radio->data_available_for_read = 0; - - /* prepare polling via eventd */ - INIT_WORK(&radio->work, si470x_work); - init_timer(&radio->timer); - radio->timer.function = si470x_timer; - radio->timer.data = (unsigned long) radio; - - return 0; -} - - -/* - * si470x_usb_driver_disconnect - disconnect the device - */ -static void si470x_usb_driver_disconnect(struct usb_interface *intf) -{ - struct si470x_device *radio = usb_get_intfdata(intf); - - del_timer_sync(&radio->timer); - flush_scheduled_work(); - - usb_set_intfdata(intf, NULL); - if (radio) { - video_unregister_device(radio->videodev); - kfree(radio->buffer); - kfree(radio); - } -} - - - -/************************************************************************** - * Video4Linux interface functions - **************************************************************************/ - -/* - * si470x_fops_read - read RDS data - */ -static ssize_t si470x_fops_read(struct file *file, char __user *buf, - size_t count, loff_t *ppos) -{ - struct si470x_device *radio = video_get_drvdata(video_devdata(file)); - struct rds_command cmd; - unsigned long flags; - unsigned int i; - unsigned int rd_blocks; + struct si470x_device *radio = video_get_drvdata(video_devdata(file)); + struct rds_command cmd; + unsigned long flags; + unsigned int i; + unsigned int rd_blocks; cmd.block_count = count / 3; /* each RDS block needs 3 bytes */ cmd.result = 0; @@ -1165,6 +936,68 @@ static int si470x_fops_release(struct inode *inode, struct file *file) } +/* + * si470x_fops - file operations interface + */ +static const struct file_operations si470x_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .read = si470x_fops_read, + .poll = si470x_fops_poll, + .ioctl = video_ioctl2, + .compat_ioctl = v4l_compat_ioctl32, + .open = si470x_fops_open, + .release = si470x_fops_release, +}; + + + +/************************************************************************** + * Video4Linux Interface + **************************************************************************/ + +/* + * si470x_v4l2_queryctrl - query control + */ +static struct v4l2_queryctrl si470x_v4l2_queryctrl[] = { +/* HINT: the disabled controls are only here to satify kradio and such apps */ + { + .id = V4L2_CID_AUDIO_VOLUME, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "Volume", + .minimum = 0, + .maximum = 15, + .step = 1, + .default_value = 15, + }, + { + .id = V4L2_CID_AUDIO_BALANCE, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, + { + .id = V4L2_CID_AUDIO_BASS, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, + { + .id = V4L2_CID_AUDIO_TREBLE, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, + { + .id = V4L2_CID_AUDIO_MUTE, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Mute", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 1, + }, + { + .id = V4L2_CID_AUDIO_LOUDNESS, + .flags = V4L2_CTRL_FLAG_DISABLED, + }, +}; + + /* * si470x_vidioc_querycap - query device capabilities */ @@ -1213,9 +1046,9 @@ static int si470x_vidioc_queryctrl(struct file *file, void *priv, { int i; - for (i = 0; i < ARRAY_SIZE(radio_queryctrl); i++) { - if (qc->id && qc->id == radio_queryctrl[i].id) { - memcpy(qc, &(radio_queryctrl[i]), sizeof(*qc)); + for (i = 0; i < ARRAY_SIZE(si470x_v4l2_queryctrl); i++) { + if (qc->id && qc->id == si470x_v4l2_queryctrl[i].id) { + memcpy(qc, &(si470x_v4l2_queryctrl[i]), sizeof(*qc)); return 0; } } @@ -1233,14 +1066,14 @@ static int si470x_vidioc_g_ctrl(struct file *file, void *priv, struct si470x_device *radio = video_get_drvdata(video_devdata(file)); switch (ctrl->id) { - case V4L2_CID_AUDIO_VOLUME: - ctrl->value = radio->registers[SYSCONFIG2] & - SYSCONFIG2_VOLUME; - break; - case V4L2_CID_AUDIO_MUTE: - ctrl->value = ((radio->registers[POWERCFG] & - POWERCFG_DMUTE) == 0) ? 1 : 0; - break; + case V4L2_CID_AUDIO_VOLUME: + ctrl->value = radio->registers[SYSCONFIG2] & + SYSCONFIG2_VOLUME; + break; + case V4L2_CID_AUDIO_MUTE: + ctrl->value = ((radio->registers[POWERCFG] & + POWERCFG_DMUTE) == 0) ? 1 : 0; + break; } return 0; @@ -1256,16 +1089,16 @@ static int si470x_vidioc_s_ctrl(struct file *file, void *priv, struct si470x_device *radio = video_get_drvdata(video_devdata(file)); switch (ctrl->id) { - case V4L2_CID_AUDIO_VOLUME: - radio->registers[SYSCONFIG2] &= ~SYSCONFIG2_VOLUME; - radio->registers[SYSCONFIG2] |= ctrl->value; - return si470x_set_register(radio, SYSCONFIG2); - case V4L2_CID_AUDIO_MUTE: - if (ctrl->value == 1) - radio->registers[POWERCFG] &= ~POWERCFG_DMUTE; - else - radio->registers[POWERCFG] |= POWERCFG_DMUTE; - return si470x_set_register(radio, POWERCFG); + case V4L2_CID_AUDIO_VOLUME: + radio->registers[SYSCONFIG2] &= ~SYSCONFIG2_VOLUME; + radio->registers[SYSCONFIG2] |= ctrl->value; + return si470x_set_register(radio, SYSCONFIG2); + case V4L2_CID_AUDIO_MUTE: + if (ctrl->value == 1) + radio->registers[POWERCFG] &= ~POWERCFG_DMUTE; + else + radio->registers[POWERCFG] |= POWERCFG_DMUTE; + return si470x_set_register(radio, POWERCFG); } return -EINVAL; @@ -1320,22 +1153,22 @@ static int si470x_vidioc_g_tuner(struct file *file, void *priv, strcpy(tuner->name, "FM"); tuner->type = V4L2_TUNER_RADIO; - switch(band) { - /* 0: 87.5 - 108 MHz (USA, Europe, default) */ - default: - tuner->rangelow = 87.5 * FREQ_MUL; - tuner->rangehigh = 108 * FREQ_MUL; - break; - /* 1: 76 - 108 MHz (Japan wide band) */ - case 1 : - tuner->rangelow = 76 * FREQ_MUL; - tuner->rangehigh = 108 * FREQ_MUL; - break; - /* 2: 76 - 90 MHz (Japan) */ - case 2 : - tuner->rangelow = 76 * FREQ_MUL; - tuner->rangehigh = 90 * FREQ_MUL; - break; + switch (band) { + /* 0: 87.5 - 108 MHz (USA, Europe, default) */ + default: + tuner->rangelow = 87.5 * FREQ_MUL; + tuner->rangehigh = 108 * FREQ_MUL; + break; + /* 1: 76 - 108 MHz (Japan wide band) */ + case 1 : + tuner->rangelow = 76 * FREQ_MUL; + tuner->rangehigh = 108 * FREQ_MUL; + break; + /* 2: 76 - 90 MHz (Japan) */ + case 2 : + tuner->rangelow = 76 * FREQ_MUL; + tuner->rangehigh = 90 * FREQ_MUL; + break; }; tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; tuner->capability = V4L2_TUNER_CAP_LOW; @@ -1407,9 +1240,147 @@ static int si470x_vidioc_s_frequency(struct file *file, void *priv, } +/* + * si470x_viddev_tamples - video device interface + */ +static struct video_device si470x_viddev_template = { + .fops = &si470x_fops, + .name = DRIVER_NAME, + .type = VID_TYPE_TUNER, + .release = video_device_release, + .vidioc_querycap = si470x_vidioc_querycap, + .vidioc_g_input = si470x_vidioc_g_input, + .vidioc_s_input = si470x_vidioc_s_input, + .vidioc_queryctrl = si470x_vidioc_queryctrl, + .vidioc_g_ctrl = si470x_vidioc_g_ctrl, + .vidioc_s_ctrl = si470x_vidioc_s_ctrl, + .vidioc_g_audio = si470x_vidioc_g_audio, + .vidioc_s_audio = si470x_vidioc_s_audio, + .vidioc_g_tuner = si470x_vidioc_g_tuner, + .vidioc_s_tuner = si470x_vidioc_s_tuner, + .vidioc_g_frequency = si470x_vidioc_g_frequency, + .vidioc_s_frequency = si470x_vidioc_s_frequency, + .owner = THIS_MODULE, +}; + + + +/************************************************************************** + * USB Interface + **************************************************************************/ + +/* + * si470x_usb_driver_probe - probe for the device + */ +static int si470x_usb_driver_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct si470x_device *radio; + + /* memory and interface allocations */ + radio = kmalloc(sizeof(struct si470x_device), GFP_KERNEL); + if (!radio) + return -ENOMEM; + radio->videodev = video_device_alloc(); + if (!radio->videodev) { + kfree(radio); + return -ENOMEM; + } + memcpy(radio->videodev, &si470x_viddev_template, + sizeof(si470x_viddev_template)); + radio->users = 0; + radio->usbdev = interface_to_usbdev(intf); + video_set_drvdata(radio->videodev, radio); + if (video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr)) { + printk(KERN_WARNING DRIVER_NAME + ": Could not register video device\n"); + video_device_release(radio->videodev); + kfree(radio); + return -EIO; + } + usb_set_intfdata(intf, radio); + + /* show some infos about the specific device */ + if (si470x_get_all_registers(radio) < 0) { + video_device_release(radio->videodev); + kfree(radio); + return -EIO; + } + printk(KERN_INFO DRIVER_NAME ": DeviceID=0x%4.4x ChipID=0x%4.4x\n", + radio->registers[DEVICEID], radio->registers[CHIPID]); + + /* check if firmware is current */ + if ((radio->registers[CHIPID] & CHIPID_FIRMWARE) + < RADIO_SW_VERSION_CURRENT) + printk(KERN_WARNING DRIVER_NAME + ": This driver is known to work with chip version %d, " + "but the device has firmware %d. If you have some " + "trouble using this driver, please report to V4L ML " + "at video4linux-list@redhat.com\n", + radio->registers[CHIPID] & CHIPID_FIRMWARE, + RADIO_SW_VERSION_CURRENT); + + /* set initial frequency */ + si470x_set_freq(radio, 87.5 * FREQ_MUL); /* available in all regions */ + + /* rds initialization */ + radio->buf_size = rds_buf * 3; + radio->buffer = kmalloc(radio->buf_size, GFP_KERNEL); + if (!radio->buffer) { + video_device_release(radio->videodev); + kfree(radio); + return -ENOMEM; + } + radio->block_count = 0; + radio->wr_index = 0; + radio->rd_index = 0; + radio->last_blocknum = 0xff; + init_waitqueue_head(&radio->read_queue); + radio->data_available_for_read = 0; + + /* prepare polling via eventd */ + INIT_WORK(&radio->work, si470x_work); + init_timer(&radio->timer); + radio->timer.function = si470x_timer; + radio->timer.data = (unsigned long) radio; + + return 0; +} + + +/* + * si470x_usb_driver_disconnect - disconnect the device + */ +static void si470x_usb_driver_disconnect(struct usb_interface *intf) +{ + struct si470x_device *radio = usb_get_intfdata(intf); + + del_timer_sync(&radio->timer); + flush_scheduled_work(); + + usb_set_intfdata(intf, NULL); + if (radio) { + video_unregister_device(radio->videodev); + kfree(radio->buffer); + kfree(radio); + } +} + + +/* + * si470x_usb_driver - usb driver interface + */ +static struct usb_driver si470x_usb_driver = { + .name = DRIVER_NAME, + .probe = si470x_usb_driver_probe, + .disconnect = si470x_usb_driver_disconnect, + .id_table = si470x_usb_driver_id_table, +}; + + /************************************************************************** - * Module interface definitions and functions + * Module Interface **************************************************************************/ /* @@ -1437,4 +1408,4 @@ module_exit(si470x_module_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_VERSION("1.0.2"); +MODULE_VERSION("1.0.3"); -- cgit v1.2.3-59-g8ed1b From 2fb8840663cf0e476549104a2c09caa0fb3b4bc9 Mon Sep 17 00:00:00 2001 From: Tobias Lorenz Date: Fri, 25 Jan 2008 05:14:57 -0300 Subject: V4L/DVB (7062): radio-si570x: Some fixes and new USB ID addition - avoid poss. locking when doing copy_to_user which may sleep - RDS is automatically activated on read now - code cleaned of unnecessary rds_commands - USB Vendor/Product ID for ADS/Tech FM Radio Receiver verified (thanks to Guillaume RAMOUSSE) Signed-off-by: Tobias Lorenz Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-si470x.c | 291 ++++++++++++++++++++----------------- 1 file changed, 156 insertions(+), 135 deletions(-) diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c index d54fe6405351..8e4bd4769048 100644 --- a/drivers/media/radio/radio-si470x.c +++ b/drivers/media/radio/radio-si470x.c @@ -55,13 +55,17 @@ * - applied all checkpatch.pl v1.12 suggestions * except the warning about the too long lines with bit comments * - renamed FMRADIO to RADIO to cut line length (checkpatch.pl) + * 2008-01-22 Tobias Lorenz + * Version 1.0.4 + * - avoid poss. locking when doing copy_to_user which may sleep + * - RDS is automatically activated on read now + * - code cleaned of unnecessary rds_commands + * - USB Vendor/Product ID for ADS/Tech FM Radio Receiver verified + * (thanks to Guillaume RAMOUSSE) * * ToDo: - * - check USB Vendor/Product ID for ADS/Tech FM Radio Receiver - * (formerly Instant FM Music) (RDX-155-EF) is 06e1:a155 * - add seeking support * - add firmware download/update support - * - add possibility to switch off RDS * - RDS support: interrupt mode, instead of polling * - add LED status output (check if that's not already done in firmware) */ @@ -70,7 +74,7 @@ /* driver definitions */ #define DRIVER_AUTHOR "Tobias Lorenz " #define DRIVER_NAME "radio-si470x" -#define DRIVER_VERSION KERNEL_VERSION(1, 0, 3) +#define DRIVER_VERSION KERNEL_VERSION(1, 0, 4) #define DRIVER_CARD "Silicon Labs Si470x FM Radio Receiver" #define DRIVER_DESC "USB radio driver for Si470x FM Radio Receivers" @@ -93,6 +97,8 @@ static struct usb_device_id si470x_usb_driver_id_table[] = { /* Silicon Labs USB FM Radio Reference Design */ { USB_DEVICE_AND_INTERFACE_INFO(0x10c4, 0x818a, USB_CLASS_HID, 0, 0) }, + /* ADS/Tech FM Radio Receiver (formerly Instant FM Music) */ + { USB_DEVICE_AND_INTERFACE_INFO(0x06e1, 0xa155, USB_CLASS_HID, 0, 0) }, /* Terminating entry */ { } }; @@ -159,6 +165,7 @@ MODULE_PARM_DESC(max_rds_errors, "RDS maximum block errors: *1*"); /* RDS poll frequency */ static int rds_poll_time = 40; /* 40 is used by the original USBRadio.exe */ +/* 50 is used by radio-cadet */ /* 75 should be okay */ /* 80 is the usual RDS receive interval */ module_param(rds_poll_time, int, 0); @@ -399,16 +406,13 @@ struct si470x_device { /* RDS receive buffer */ struct work_struct work; + wait_queue_head_t read_queue; struct timer_list timer; spinlock_t lock; /* buffer locking */ - unsigned char *buffer; + unsigned char *buffer; /* size is always multiple of three */ unsigned int buf_size; unsigned int rd_index; unsigned int wr_index; - unsigned int block_count; - unsigned char last_blocknum; - wait_queue_head_t read_queue; - int data_available_for_read; }; @@ -658,8 +662,7 @@ static int si470x_start(struct si470x_device *radio) return retval; /* sysconfig 1 */ - radio->registers[SYSCONFIG1] = - SYSCONFIG1_DE | SYSCONFIG1_RDS; + radio->registers[SYSCONFIG1] = SYSCONFIG1_DE; retval = si470x_set_register(radio, SYSCONFIG1); if (retval < 0) return retval; @@ -685,6 +688,14 @@ static int si470x_start(struct si470x_device *radio) */ static int si470x_stop(struct si470x_device *radio) { + int retval; + + /* sysconfig 1 */ + radio->registers[SYSCONFIG1] &= ~SYSCONFIG1_RDS; + retval = si470x_set_register(radio, SYSCONFIG1); + if (retval < 0) + return retval; + /* powercfg */ radio->registers[POWERCFG] &= ~POWERCFG_DMUTE; /* POWERCFG_ENABLE has to automatically go low */ @@ -693,6 +704,17 @@ static int si470x_stop(struct si470x_device *radio) } +/* + * si470x_rds_on - switch on rds reception + */ +static int si470x_rds_on(struct si470x_device *radio) +{ + /* sysconfig 1 */ + radio->registers[SYSCONFIG1] |= SYSCONFIG1_RDS; + return si470x_set_register(radio, SYSCONFIG1); +} + + /************************************************************************** * RDS Driver Functions @@ -703,15 +725,13 @@ static int si470x_stop(struct si470x_device *radio) */ static void si470x_rds(struct si470x_device *radio) { - unsigned long flags; unsigned char tmpbuf[3]; unsigned char blocknum; - unsigned char bler; /* RDS block errors */ + unsigned char bler; /* rds block errors */ unsigned short rds; unsigned int i; - if (radio->users == 0) - return; + /* get rds blocks */ if (si470x_get_rds_registers(radio) < 0) return; if ((radio->registers[STATUSRSSI] & STATUSRSSI_RDSR) == 0) { @@ -723,63 +743,67 @@ static void si470x_rds(struct si470x_device *radio) return; } - for (blocknum = 0; blocknum < 4; blocknum++) { - switch (blocknum) { - default: - bler = (radio->registers[STATUSRSSI] & - STATUSRSSI_BLERA) >> 9; - rds = radio->registers[RDSA]; - break; - case 1: - bler = (radio->registers[READCHAN] & - READCHAN_BLERB) >> 14; - rds = radio->registers[RDSB]; - break; - case 2: - bler = (radio->registers[READCHAN] & - READCHAN_BLERC) >> 12; - rds = radio->registers[RDSC]; - break; - case 3: - bler = (radio->registers[READCHAN] & - READCHAN_BLERD) >> 10; - rds = radio->registers[RDSD]; - break; - }; - - /* Fill the V4L2 RDS buffer */ - tmpbuf[0] = rds & 0x00ff; /* LSB */ - tmpbuf[1] = (rds & 0xff00) >> 8;/* MSB */ - tmpbuf[2] = blocknum; /* offset name */ - tmpbuf[2] |= blocknum << 3; /* received offset */ - if (bler > max_rds_errors) - tmpbuf[2] |= 0x80; /* uncorrectable errors */ - else if (bler > 0) - tmpbuf[2] |= 0x40; /* corrected error(s) */ - - spin_lock_irqsave(&radio->lock, flags); - - /* copy RDS block to internal buffer */ - for (i = 0; i < 3; i++) { - radio->buffer[radio->wr_index] = tmpbuf[i]; - radio->wr_index++; + /* copy four RDS blocks to internal buffer */ + if (spin_trylock(&radio->lock)) { + /* process each rds block */ + for (blocknum = 0; blocknum < 4; blocknum++) { + switch (blocknum) { + default: + bler = (radio->registers[STATUSRSSI] & + STATUSRSSI_BLERA) >> 9; + rds = radio->registers[RDSA]; + break; + case 1: + bler = (radio->registers[READCHAN] & + READCHAN_BLERB) >> 14; + rds = radio->registers[RDSB]; + break; + case 2: + bler = (radio->registers[READCHAN] & + READCHAN_BLERC) >> 12; + rds = radio->registers[RDSC]; + break; + case 3: + bler = (radio->registers[READCHAN] & + READCHAN_BLERD) >> 10; + rds = radio->registers[RDSD]; + break; + }; + + /* Fill the V4L2 RDS buffer */ + tmpbuf[0] = rds & 0x00ff; /* LSB */ + tmpbuf[1] = (rds & 0xff00) >> 8;/* MSB */ + tmpbuf[2] = blocknum; /* offset name */ + tmpbuf[2] |= blocknum << 3; /* received offset */ + if (bler > max_rds_errors) + tmpbuf[2] |= 0x80; /* uncorrectable errors */ + else if (bler > 0) + tmpbuf[2] |= 0x40; /* corrected error(s) */ + + /* copy RDS block to internal buffer */ + for (i = 0; i < 3; i++) { + radio->buffer[radio->wr_index] = tmpbuf[i]; + radio->wr_index++; + } + + /* wrap write pointer */ + if (radio->wr_index >= radio->buf_size) + radio->wr_index = 0; + + /* check for overflow */ + if (radio->wr_index == radio->rd_index) { + /* increment and wrap read pointer */ + radio->rd_index += 3; + if (radio->rd_index >= radio->buf_size) + radio->rd_index = 0; + } } - - if (radio->wr_index >= radio->buf_size) - radio->wr_index = 0; - - if (radio->wr_index == radio->rd_index) { - radio->rd_index += 3; - if (radio->rd_index >= radio->buf_size) - radio->rd_index = 0; - } else - radio->block_count++; - - spin_unlock_irqrestore(&radio->lock, flags); + spin_unlock(&radio->lock); } - radio->data_available_for_read = 1; - wake_up_interruptible(&radio->read_queue); + /* wake up read queue */ + if (radio->wr_index != radio->rd_index) + wake_up_interruptible(&radio->read_queue); } @@ -795,14 +819,14 @@ static void si470x_timer(unsigned long data) /* - * si470x_timer - rds work function + * si470x_work - rds work function */ static void si470x_work(struct work_struct *work) { struct si470x_device *radio = container_of(work, struct si470x_device, work); - if (radio->users == 0) + if ((radio->registers[SYSCONFIG1] & SYSCONFIG1_RDS) == 0) return; si470x_rds(radio); @@ -822,53 +846,52 @@ static ssize_t si470x_fops_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { struct si470x_device *radio = video_get_drvdata(video_devdata(file)); - struct rds_command cmd; - unsigned long flags; - unsigned int i; - unsigned int rd_blocks; - - cmd.block_count = count / 3; /* each RDS block needs 3 bytes */ - cmd.result = 0; - cmd.buffer = buf; - cmd.instance = file; - - /* copy RDS block out of internal buffer */ - while (!radio->data_available_for_read) { - if (wait_event_interruptible(radio->read_queue, - radio->data_available_for_read) < 0) - return -EINTR; - } + int retval = 0; + unsigned int block_count = 0; - spin_lock_irqsave(&radio->lock, flags); - rd_blocks = cmd.block_count; - if (rd_blocks > radio->block_count) - rd_blocks = radio->block_count; + /* switch on rds reception */ + if ((radio->registers[SYSCONFIG1] & SYSCONFIG1_RDS) == 0) { + si470x_rds_on(radio); + schedule_work(&radio->work); + } - if (!rd_blocks) { - spin_unlock_irqrestore(&radio->lock, flags); - return cmd.result; + /* block if no new data available */ + while (radio->wr_index == radio->rd_index) { + if (file->f_flags & O_NONBLOCK) + return -EWOULDBLOCK; + interruptible_sleep_on(&radio->read_queue); } - for (i = 0; i < rd_blocks; i++) { - /* copy RDS block to user buffer */ - if (radio->rd_index == radio->wr_index) - break; + /* calculate block count from byte count */ + count /= 3; + + /* copy RDS block out of internal buffer and to user buffer */ + if (spin_trylock(&radio->lock)) { + while (block_count < count) { + if (radio->rd_index == radio->wr_index) + break; - if (copy_to_user(buf, &radio->buffer[radio->rd_index], 3)) - break; + /* always transfer rds complete blocks */ + if (copy_to_user(buf, + &radio->buffer[radio->rd_index], 3)) + /* retval = -EFAULT; */ + break; - radio->rd_index += 3; - if (radio->rd_index >= radio->buf_size) - radio->rd_index = 0; - radio->block_count--; + /* increment and wrap read pointer */ + radio->rd_index += 3; + if (radio->rd_index >= radio->buf_size) + radio->rd_index = 0; + + /* increment counters */ + block_count++; + buf += 3; + retval += 3; + } - buf += 3; - cmd.result += 3; + spin_unlock(&radio->lock); } - radio->data_available_for_read = (radio->block_count > 0); - spin_unlock_irqrestore(&radio->lock, flags); - return cmd.result; + return retval; } @@ -879,14 +902,19 @@ static unsigned int si470x_fops_poll(struct file *file, struct poll_table_struct *pts) { struct si470x_device *radio = video_get_drvdata(video_devdata(file)); - int retval; - retval = 0; - if (radio->data_available_for_read) - retval = POLLIN | POLLRDNORM; + /* switch on rds reception */ + if ((radio->registers[SYSCONFIG1] & SYSCONFIG1_RDS) == 0) { + si470x_rds_on(radio); + schedule_work(&radio->work); + } + poll_wait(file, &radio->read_queue, pts); - return retval; + if (radio->rd_index != radio->wr_index) + return POLLIN | POLLRDNORM; + + return 0; } @@ -895,17 +923,11 @@ static unsigned int si470x_fops_poll(struct file *file, */ static int si470x_fops_open(struct inode *inode, struct file *file) { - int retval; struct si470x_device *radio = video_get_drvdata(video_devdata(file)); radio->users++; - if (radio->users == 1) { - retval = si470x_start(radio); - if (retval < 0) - return retval; - - schedule_work(&radio->work); - } + if (radio->users == 1) + return si470x_start(radio); return 0; } @@ -916,7 +938,6 @@ static int si470x_fops_open(struct inode *inode, struct file *file) */ static int si470x_fops_release(struct inode *inode, struct file *file) { - int retval; struct si470x_device *radio = video_get_drvdata(video_devdata(file)); if (!radio) @@ -924,12 +945,14 @@ static int si470x_fops_release(struct inode *inode, struct file *file) radio->users--; if (radio->users == 0) { - radio->data_available_for_read = 1; /* ? */ - wake_up_interruptible(&radio->read_queue); /* ? */ + /* stop rds reception */ + del_timer_sync(&radio->timer); + flush_scheduled_work(); - retval = si470x_stop(radio); - if (retval < 0) - return retval; + /* cancel read processes */ + wake_up_interruptible(&radio->read_queue); + + return si470x_stop(radio); } return 0; @@ -1314,9 +1337,10 @@ static int si470x_usb_driver_probe(struct usb_interface *intf, < RADIO_SW_VERSION_CURRENT) printk(KERN_WARNING DRIVER_NAME ": This driver is known to work with chip version %d, " - "but the device has firmware %d. If you have some " - "trouble using this driver, please report to V4L ML " - "at video4linux-list@redhat.com\n", + "but the device has firmware %d.\n" + DRIVER_NAME + "If you have some trouble using this driver, please " + "report to V4L ML at video4linux-list@redhat.com\n", radio->registers[CHIPID] & CHIPID_FIRMWARE, RADIO_SW_VERSION_CURRENT); @@ -1331,12 +1355,9 @@ static int si470x_usb_driver_probe(struct usb_interface *intf, kfree(radio); return -ENOMEM; } - radio->block_count = 0; radio->wr_index = 0; radio->rd_index = 0; - radio->last_blocknum = 0xff; init_waitqueue_head(&radio->read_queue); - radio->data_available_for_read = 0; /* prepare polling via eventd */ INIT_WORK(&radio->work, si470x_work); @@ -1408,4 +1429,4 @@ module_exit(si470x_module_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_VERSION("1.0.3"); +MODULE_VERSION("1.0.4"); -- cgit v1.2.3-59-g8ed1b From 5ea60531c1c6164788ea7d6efecdf575adc543ff Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 24 Jan 2008 22:29:46 -0300 Subject: V4L/DVB (7063): xc5000: Fix OOPS caused by missing firmware xc5000: Fix OOPS caused by missing firmware. Signed-off-by: Chaogui Zhang Acked-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/xc5000.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/dvb/frontends/xc5000.c b/drivers/media/dvb/frontends/xc5000.c index a13027e09cda..f642ca200b59 100644 --- a/drivers/media/dvb/frontends/xc5000.c +++ b/drivers/media/dvb/frontends/xc5000.c @@ -558,6 +558,7 @@ static int xc5000_fwupload(struct dvb_frontend* fe) if (ret) { printk(KERN_ERR "xc5000: Upload failed. (file not found?)\n"); ret = XC_RESULT_RESET_FAILURE; + goto out; } else { printk(KERN_INFO "xc5000: firmware read %Zu bytes.\n", fw->size); @@ -572,6 +573,7 @@ static int xc5000_fwupload(struct dvb_frontend* fe) ret = xc_load_i2c_sequence(fe, fw->data ); } +out: release_firmware(fw); return ret; } -- cgit v1.2.3-59-g8ed1b From 7999a8161d06326f3c4cb797fcf0de8b2eb08253 Mon Sep 17 00:00:00 2001 From: Yousef Lamlum Date: Fri, 25 Jan 2008 05:51:48 -0300 Subject: V4L/DVB (7065): Artec T14BR patches Added Artec T14BR support Signed-off-by: Yousef Lamlum Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dib0700_devices.c | 7 ++++++- drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 1 + 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 1aa335d5aa97..a7088cee1ef9 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -851,6 +851,7 @@ struct usb_device_id dib0700_usb_id_table[] = { { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500_PC) }, /* 20 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_EXPRESS) }, /* 21 */{ USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U7000) }, +/* 22 */{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14BR) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -1018,7 +1019,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { }, }, - .num_device_descs = 2, + .num_device_descs = 3, .devices = { { "DiBcom STK7070P reference design", { &dib0700_usb_id_table[15], NULL }, @@ -1028,6 +1029,10 @@ struct dvb_usb_device_properties dib0700_devices[] = { { &dib0700_usb_id_table[16], NULL }, { NULL }, }, + { "Artec T14BR DVB-T", + { &dib0700_usb_id_table[22], NULL }, + { NULL }, + } } }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index aee5a6ef8217..36aeda2b1716 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -105,6 +105,7 @@ #define USB_PID_ULTIMA_TVBOX_USB2_WARM 0x810a #define USB_PID_ARTEC_T14_COLD 0x810b #define USB_PID_ARTEC_T14_WARM 0x810c +#define USB_PID_ARTEC_T14BR 0x810f #define USB_PID_ULTIMA_TVBOX_USB2_FX_COLD 0x8613 #define USB_PID_ULTIMA_TVBOX_USB2_FX_WARM 0x1002 #define USB_PID_UNK_HYPER_PALTEK_COLD 0x005e -- cgit v1.2.3-59-g8ed1b From 132c3188433bcb149ee764be1ca9a69f6d719dfe Mon Sep 17 00:00:00 2001 From: Daniel Gimpelevich Date: Fri, 25 Jan 2008 06:02:42 -0300 Subject: V4L/DVB (7066): ASUS My Cinema U3000 Mini DVBT Tuner Adding support for ASUS My Cinema U3000 Mini DVBT Tuner Signed-off-by: Daniel Gimpelevich Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dib0700_devices.c | 55 ++++++++++++++++++++++++++--- drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 3 ++ 2 files changed, 53 insertions(+), 5 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index a7088cee1ef9..de36790899b3 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -230,6 +230,27 @@ static struct mt2266_config stk7700d_mt2266_config[2] = { } }; +static int stk7700P2_frontend_attach(struct dvb_usb_adapter *adap) +{ + if (adap->id == 0) { + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(10); + dib7000p_i2c_enumeration(&adap->dev->i2c_adap,1,18,stk7700d_dib7000p_mt2266_config); + } + + adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,0x80+(adap->id << 1), + &stk7700d_dib7000p_mt2266_config[adap->id]); + + return adap->fe == NULL ? -ENODEV : 0; +} + static int stk7700d_frontend_attach(struct dvb_usb_adapter *adap) { if (adap->id == 0) { @@ -850,8 +871,10 @@ struct usb_device_id dib0700_usb_id_table[] = { { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T) }, { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500_PC) }, /* 20 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_EXPRESS) }, -/* 21 */{ USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U7000) }, -/* 22 */{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14BR) }, + { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U7000) }, + { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14BR) }, + { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000) }, + { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -923,7 +946,6 @@ struct dvb_usb_device_properties dib0700_devices[] = { { &dib0700_usb_id_table[20] }, { NULL }, }, - /* dom : pour Gigabyte U7000 */ { "Gigabyte U7000", { &dib0700_usb_id_table[21], NULL }, { NULL }, @@ -1005,6 +1027,25 @@ struct dvb_usb_device_properties dib0700_devices[] = { .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), .rc_query = dib0700_rc_query + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + + .num_adapters = 1, + .adapter = { + { + .frontend_attach = stk7700P2_frontend_attach, + .tuner_attach = stk7700d_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }, + }, + + .num_device_descs = 1, + .devices = { + { "ASUS My Cinema U3000 Mini DVBT Tuner", + { &dib0700_usb_id_table[23], NULL }, + { NULL }, + }, + } }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 1, @@ -1019,7 +1060,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { }, }, - .num_device_descs = 3, + .num_device_descs = 4, .devices = { { "DiBcom STK7070P reference design", { &dib0700_usb_id_table[15], NULL }, @@ -1032,7 +1073,11 @@ struct dvb_usb_device_properties dib0700_devices[] = { { "Artec T14BR DVB-T", { &dib0700_usb_id_table[22], NULL }, { NULL }, - } + }, + { "ASUS My Cinema U3100 Mini DVBT Tuner", + { &dib0700_usb_id_table[24], NULL }, + { NULL }, + }, } }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 36aeda2b1716..a411430f827b 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -17,6 +17,7 @@ #define USB_VID_ANCHOR 0x0547 #define USB_VID_ANSONIC 0x10b9 #define USB_VID_ANUBIS_ELECTRONIC 0x10fd +#define USB_VID_ASUS 0x0b05 #define USB_VID_AVERMEDIA 0x07ca #define USB_VID_COMPRO 0x185b #define USB_VID_COMPRO_UNK 0x145f @@ -182,5 +183,7 @@ #define USB_PID_LIFEVIEW_TV_WALKER_TWIN_WARM 0x0513 /* dom pour gigabyte u7000 */ #define USB_PID_GIGABYTE_U7000 0x7001 +#define USB_PID_ASUS_U3000 0x171f +#define USB_PID_ASUS_U3100 0x173f #endif -- cgit v1.2.3-59-g8ed1b From 3a0311c6c539bd022a65d298355471aacbd7a618 Mon Sep 17 00:00:00 2001 From: Jose Alberto Reguero Date: Fri, 25 Jan 2008 06:05:16 -0300 Subject: V4L/DVB (7067): fix autoserach in the Hauppauge NOVA-T 500 This patch fix autoserach in the Hauppauge NOVA-T 500. Signed-off-by: Jose Alberto Reguero Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/dib3000mc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/frontends/dib3000mc.c b/drivers/media/dvb/frontends/dib3000mc.c index edae0be063f5..3667f8e48091 100644 --- a/drivers/media/dvb/frontends/dib3000mc.c +++ b/drivers/media/dvb/frontends/dib3000mc.c @@ -700,7 +700,7 @@ static int dib3000mc_set_frontend(struct dvb_frontend* fe, fep->u.ofdm.guard_interval == GUARD_INTERVAL_AUTO || fep->u.ofdm.constellation == QAM_AUTO || fep->u.ofdm.code_rate_HP == FEC_AUTO) { - int i = 100, found; + int i = 1000, found; dib3000mc_autosearch_start(fe, fep); do { -- cgit v1.2.3-59-g8ed1b From c7637b1a31bb0470e1247f1923a323c90927ac37 Mon Sep 17 00:00:00 2001 From: Tim Taubert Date: Fri, 25 Jan 2008 06:16:36 -0300 Subject: V4L/DVB (7068): Add support for WinTV Nova-T-CE driver Add support for WinTV Nova-T-CE driver Signed-off-by: Tim Taubert Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dib0700_devices.c | 15 +++++++++++++-- drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 1 + 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index de36790899b3..4c8c71206581 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -875,6 +875,7 @@ struct usb_device_id dib0700_usb_id_table[] = { { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14BR) }, { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000) }, { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100) }, +/* 25 */ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_3) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -1060,7 +1061,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { }, }, - .num_device_descs = 4, + .num_device_descs = 5, .devices = { { "DiBcom STK7070P reference design", { &dib0700_usb_id_table[15], NULL }, @@ -1078,7 +1079,17 @@ struct dvb_usb_device_properties dib0700_devices[] = { { &dib0700_usb_id_table[24], NULL }, { NULL }, }, - } + { "Hauppauge Nova-T Stick", + { &dib0700_usb_id_table[25], NULL }, + { NULL }, + }, + }, + + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_key_map = dib0700_rc_keys, + .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), + .rc_query = dib0700_rc_query + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 2, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index a411430f827b..35df40f5f7ef 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -128,6 +128,7 @@ #define USB_PID_HAUPPAUGE_NOVA_T_500_2 0x9950 #define USB_PID_HAUPPAUGE_NOVA_T_STICK 0x7050 #define USB_PID_HAUPPAUGE_NOVA_T_STICK_2 0x7060 +#define USB_PID_HAUPPAUGE_NOVA_T_STICK_3 0x7070 #define USB_PID_HAUPPAUGE_NOVA_TD_STICK 0x9580 #define USB_PID_AVERMEDIA_EXPRESS 0xb568 #define USB_PID_AVERMEDIA_VOLAR 0xa807 -- cgit v1.2.3-59-g8ed1b From 13b83b5d516abe2610ae7812267d7d322050bf68 Mon Sep 17 00:00:00 2001 From: Darren Salt Date: Fri, 25 Jan 2008 06:20:02 -0300 Subject: V4L/DVB (7069): Support for myTV.t Here's a roll-up which provides support for both this and the myTV.t. Signed-off-by: Darren Salt Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dib0700_devices.c | 7 ++++++- drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 1 + 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 4c8c71206581..36d29f9d2f68 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -876,6 +876,7 @@ struct usb_device_id dib0700_usb_id_table[] = { { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000) }, { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100) }, /* 25 */ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_3) }, + { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_MYTV_T) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -1061,7 +1062,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { }, }, - .num_device_descs = 5, + .num_device_descs = 6, .devices = { { "DiBcom STK7070P reference design", { &dib0700_usb_id_table[15], NULL }, @@ -1083,6 +1084,10 @@ struct dvb_usb_device_properties dib0700_devices[] = { { &dib0700_usb_id_table[25], NULL }, { NULL }, }, + { "Hauppauge Nova-T MyTV.t", + { &dib0700_usb_id_table[26], NULL }, + { NULL }, + }, }, .rc_interval = DEFAULT_RC_INTERVAL, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 35df40f5f7ef..aa4844ef875e 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -129,6 +129,7 @@ #define USB_PID_HAUPPAUGE_NOVA_T_STICK 0x7050 #define USB_PID_HAUPPAUGE_NOVA_T_STICK_2 0x7060 #define USB_PID_HAUPPAUGE_NOVA_T_STICK_3 0x7070 +#define USB_PID_HAUPPAUGE_MYTV_T 0x7080 #define USB_PID_HAUPPAUGE_NOVA_TD_STICK 0x9580 #define USB_PID_AVERMEDIA_EXPRESS 0xb568 #define USB_PID_AVERMEDIA_VOLAR 0xa807 -- cgit v1.2.3-59-g8ed1b From 853ea132c75ff2c4e3c3aaf61bf3ef5779774dbc Mon Sep 17 00:00:00 2001 From: Soeren Moch Date: Fri, 25 Jan 2008 06:27:06 -0300 Subject: V4L/DVB (7070): Fix some tuning problems The attached patch solves all my vdr tuning problems on a dib7000p nova-t stick as far as I could check within the last weekend. It disables streaming while tuning, like that the number of faulty TS packets is reduced. Signed-off-by: Soeren Moch Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/dib3000mc.c | 8 ++++++-- drivers/media/dvb/frontends/dib7000m.c | 9 ++++++--- drivers/media/dvb/frontends/dib7000p.c | 8 +++++--- 3 files changed, 17 insertions(+), 8 deletions(-) diff --git a/drivers/media/dvb/frontends/dib3000mc.c b/drivers/media/dvb/frontends/dib3000mc.c index 3667f8e48091..fa851601e7d4 100644 --- a/drivers/media/dvb/frontends/dib3000mc.c +++ b/drivers/media/dvb/frontends/dib3000mc.c @@ -684,6 +684,9 @@ static int dib3000mc_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *fep) { struct dib3000mc_state *state = fe->demodulator_priv; + int ret; + + dib3000mc_set_output_mode(state, OUTMODE_HIGH_Z); state->current_bandwidth = fep->u.ofdm.bandwidth; dib3000mc_set_bandwidth(state, BANDWIDTH_TO_KHZ(fep->u.ofdm.bandwidth)); @@ -715,10 +718,11 @@ static int dib3000mc_set_frontend(struct dvb_frontend* fe, dib3000mc_get_frontend(fe, fep); } + ret = dib3000mc_tune(fe, fep); + /* make this a config parameter */ dib3000mc_set_output_mode(state, OUTMODE_MPEG2_FIFO); - - return dib3000mc_tune(fe, fep); + return ret; } static int dib3000mc_read_status(struct dvb_frontend *fe, fe_status_t *stat) diff --git a/drivers/media/dvb/frontends/dib7000m.c b/drivers/media/dvb/frontends/dib7000m.c index fb18441a8c57..5f1375e30dfc 100644 --- a/drivers/media/dvb/frontends/dib7000m.c +++ b/drivers/media/dvb/frontends/dib7000m.c @@ -1171,7 +1171,9 @@ static int dib7000m_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *fep) { struct dib7000m_state *state = fe->demodulator_priv; - int time; + int time, ret; + + dib7000m_set_output_mode(state, OUTMODE_HIGH_Z); state->current_bandwidth = fep->u.ofdm.bandwidth; dib7000m_set_bandwidth(state, BANDWIDTH_TO_KHZ(fep->u.ofdm.bandwidth)); @@ -1206,10 +1208,11 @@ static int dib7000m_set_frontend(struct dvb_frontend* fe, dib7000m_get_frontend(fe, fep); } + ret = dib7000m_tune(fe, fep); + /* make this a config parameter */ dib7000m_set_output_mode(state, OUTMODE_MPEG2_FIFO); - - return dib7000m_tune(fe, fep); + return ret; } static int dib7000m_read_status(struct dvb_frontend *fe, fe_status_t *stat) diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c index f45bcfc51cf8..0396a6f31ef8 100644 --- a/drivers/media/dvb/frontends/dib7000p.c +++ b/drivers/media/dvb/frontends/dib7000p.c @@ -1128,8 +1128,9 @@ static int dib7000p_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *fep) { struct dib7000p_state *state = fe->demodulator_priv; - int time; + int time, ret; + dib7000p_set_output_mode(state, OUTMODE_HIGH_Z); state->current_bandwidth = fep->u.ofdm.bandwidth; dib7000p_set_bandwidth(state, BANDWIDTH_TO_KHZ(fep->u.ofdm.bandwidth)); @@ -1166,10 +1167,11 @@ static int dib7000p_set_frontend(struct dvb_frontend* fe, dib7000p_get_frontend(fe, fep); } + ret = dib7000p_tune(fe, fep); + /* make this a config parameter */ dib7000p_set_output_mode(state, OUTMODE_MPEG2_FIFO); - - return dib7000p_tune(fe, fep); + return ret; } static int dib7000p_read_status(struct dvb_frontend *fe, fe_status_t *stat) -- cgit v1.2.3-59-g8ed1b From a162abb06bda3f38750a208e85e27f419798aa79 Mon Sep 17 00:00:00 2001 From: Patrick Boettcher Date: Fri, 25 Jan 2008 06:37:57 -0300 Subject: V4L/DVB (7071): DiB0700: Start streaming the right way There was a mistake in the way how to start the streaming in the dib0700. This patch fixes that. Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dib0700_core.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c index 3ea294eb96bd..c9857d5c6982 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_core.c +++ b/drivers/media/dvb/dvb-usb/dib0700_core.c @@ -243,7 +243,7 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) u8 b[4]; b[0] = REQUEST_ENABLE_VIDEO; - b[1] = 0x00; + b[1] = (onoff << 4) | 0x00; /* this bit gives a kind of command, rather than enabling something or not */ b[2] = (0x01 << 4); /* Master mode */ b[3] = 0x00; @@ -256,9 +256,6 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) b[2] |= st->channel_state; - if (st->channel_state) /* if at least one channel is active */ - b[1] = (0x01 << 4) | 0x00; - deb_info("data for streaming: %x %x\n",b[1],b[2]); return dib0700_ctrl_wr(adap->dev, b, 4); -- cgit v1.2.3-59-g8ed1b From c52344fdc49665a4eeef24236750b49637d6982f Mon Sep 17 00:00:00 2001 From: Olivier DANET Date: Fri, 25 Jan 2008 06:50:07 -0300 Subject: V4L/DVB (7072): sets the MT2060 IF1 frequency according to EEPROM Here is a patch for Hauppage Nova-T-Stick and Nova-T-500 users. It sets the MT2060 IF1 frequency according to the calibration values stored in the EEPROM. It is supposed to enhance the signal quality, but, hey, there is no guarantee. Feedbacks would be much appreciated, to know whether it deserves being applied. Signed-off-by: Olivier DANET Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dib0700_devices.c | 32 ++++++++++++++++++++++++----- 1 file changed, 27 insertions(+), 5 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 36d29f9d2f68..ffecb6ed8190 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -94,12 +94,28 @@ static int bristol_frontend_attach(struct dvb_usb_adapter *adap) (10 + adap->id) << 1, &bristol_dib3000mc_config[adap->id])) == NULL ? -ENODEV : 0; } +int eeprom_read(struct i2c_adapter *adap,u8 adrs,u8 *pval) +{ + struct i2c_msg msg[2] = { + { .addr = 0x50, .flags = 0, .buf = &adrs, .len = 1 }, + { .addr = 0x50, .flags = I2C_M_RD, .buf = pval, .len = 1 }, + }; + if (i2c_transfer(adap, msg, 2) != 2) return -EREMOTEIO; + return 0; +} + static int bristol_tuner_attach(struct dvb_usb_adapter *adap) { - struct dib0700_state *st = adap->dev->priv; + struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap; struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe, 1); - return dvb_attach(mt2060_attach,adap->fe, tun_i2c, &bristol_mt2060_config[adap->id], - st->mt2060_if1[adap->id]) == NULL ? -ENODEV : 0; + s8 a; + int if1=1220; + if (adap->dev->udev->descriptor.idVendor == USB_VID_HAUPPAUGE && + adap->dev->udev->descriptor.idProduct == USB_PID_HAUPPAUGE_NOVA_T_500_2) { + if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a; + } + return dvb_attach(mt2060_attach,adap->fe, tun_i2c,&bristol_mt2060_config[adap->id], + if1) == NULL ? -ENODEV : 0; } /* STK7700D: Pinnacle/Terratec/Hauppauge Dual DVB-T Diversity */ @@ -628,16 +644,22 @@ static struct mt2060_config stk7700p_mt2060_config = { static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap) { + struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap; struct dib0700_state *st = adap->dev->priv; struct i2c_adapter *tun_i2c; - + s8 a; + int if1=1220; + if (adap->dev->udev->descriptor.idVendor == USB_VID_HAUPPAUGE && + adap->dev->udev->descriptor.idProduct == USB_PID_HAUPPAUGE_NOVA_T_STICK) { + if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a; + } if (st->is_dib7000pc) tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1); else tun_i2c = dib7000m_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1); return dvb_attach(mt2060_attach, adap->fe, tun_i2c, &stk7700p_mt2060_config, - st->mt2060_if1[0]) == NULL ? -ENODEV : 0; + if1) == NULL ? -ENODEV : 0; } /* DIB7070 generic */ -- cgit v1.2.3-59-g8ed1b From 3cb2c39ded029b8572cf7625b8042e9984d63c2c Mon Sep 17 00:00:00 2001 From: Patrick Boettcher Date: Fri, 25 Jan 2008 07:25:20 -0300 Subject: V4L/DVB (7073): DiB7070: Reception quality improved Removing two bugs to improve sensitivity for DiB7070 and Dib7000P with MT2266. Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dib0700_devices.c | 6 ++++++ drivers/media/dvb/frontends/dib0070.c | 13 +++++++++++-- 2 files changed, 17 insertions(+), 2 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index ffecb6ed8190..1c6843c631e1 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -781,6 +781,8 @@ static struct dib7000p_config dib7070p_dib7000p_config = { .agc_config_count = 1, .agc = &dib7070_agc_config, .bw = &dib7070_bw_config_12_mhz, + .tuner_is_baseband = 1, + .spur_protect = 1, .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, @@ -820,6 +822,8 @@ static struct dib7000p_config stk7070pd_dib7000p_config[2] = { .agc_config_count = 1, .agc = &dib7070_agc_config, .bw = &dib7070_bw_config_12_mhz, + .tuner_is_baseband = 1, + .spur_protect = 1, .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, @@ -832,6 +836,8 @@ static struct dib7000p_config stk7070pd_dib7000p_config[2] = { .agc_config_count = 1, .agc = &dib7070_agc_config, .bw = &dib7070_bw_config_12_mhz, + .tuner_is_baseband = 1, + .spur_protect = 1, .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, diff --git a/drivers/media/dvb/frontends/dib0070.c b/drivers/media/dvb/frontends/dib0070.c index 481eaa684157..fe895bf7b18f 100644 --- a/drivers/media/dvb/frontends/dib0070.c +++ b/drivers/media/dvb/frontends/dib0070.c @@ -434,9 +434,14 @@ static u16 dib0070_p1f_defaults[] = 0, }; -static void dib0070_wbd_calibration(struct dib0070_state *state) +static void dib0070_wbd_calibration(struct dvb_frontend *fe) { u16 wbd_offs; + struct dib0070_state *state = fe->tuner_priv; + + if (state->cfg->sleep) + state->cfg->sleep(fe, 0); + dib0070_write_reg(state, 0x0f, 0x6d81); dib0070_write_reg(state, 0x20, 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001); msleep(9); @@ -444,6 +449,10 @@ static void dib0070_wbd_calibration(struct dib0070_state *state) dib0070_write_reg(state, 0x20, 0); state->wbd_ff_offset = ((wbd_offs * 8 * 18 / 33 + 1) / 2); dprintk( "WBDStart = %d (Vargen) - FF = %hd", (u32) wbd_offs * 1800/1024, state->wbd_ff_offset); + + if (state->cfg->sleep) + state->cfg->sleep(fe, 1); + } u16 dib0070_wbd_offset(struct dvb_frontend *fe) @@ -560,7 +569,7 @@ struct dvb_frontend * dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter if (dib0070_reset(state) != 0) goto free_mem; - dib0070_wbd_calibration(state); + dib0070_wbd_calibration(fe); printk(KERN_INFO "DiB0070: successfully identified\n"); memcpy(&fe->ops.tuner_ops, &dib0070_ops, sizeof(struct dvb_tuner_ops)); -- cgit v1.2.3-59-g8ed1b From 904a82e3e27b57a2518f7575c0cab9b6aaddc422 Mon Sep 17 00:00:00 2001 From: Patrick Boettcher Date: Fri, 25 Jan 2008 07:31:58 -0300 Subject: V4L/DVB (7074): DiB7000P: correct tuning problem for 7MHz channel Tuning problem for 7Mhz channels fixes Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/dib7000p.c | 10 ++++------ drivers/media/dvb/frontends/dibx000_common.h | 5 +++++ 2 files changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c index 0396a6f31ef8..47c23e29753e 100644 --- a/drivers/media/dvb/frontends/dib7000p.c +++ b/drivers/media/dvb/frontends/dib7000p.c @@ -35,8 +35,8 @@ struct dib7000p_state { u16 wbd_ref; - u8 current_band; - fe_bandwidth_t current_bandwidth; + u8 current_band; + u32 current_bandwidth; struct dibx000_agc_config *current_agc; u32 timf; @@ -1074,7 +1074,7 @@ static int dib7000p_get_frontend(struct dvb_frontend* fe, fep->inversion = INVERSION_AUTO; - fep->u.ofdm.bandwidth = state->current_bandwidth; + fep->u.ofdm.bandwidth = BANDWIDTH_TO_INDEX(state->current_bandwidth); switch ((tps >> 8) & 0x3) { case 0: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_2K; break; @@ -1131,10 +1131,8 @@ static int dib7000p_set_frontend(struct dvb_frontend* fe, int time, ret; dib7000p_set_output_mode(state, OUTMODE_HIGH_Z); - state->current_bandwidth = fep->u.ofdm.bandwidth; - dib7000p_set_bandwidth(state, BANDWIDTH_TO_KHZ(fep->u.ofdm.bandwidth)); - /* maybe the parameter has been changed */ + /* maybe the parameter has been changed */ state->sfn_workaround_active = buggy_sfn_workaround; if (fe->ops.tuner_ops.set_params) diff --git a/drivers/media/dvb/frontends/dibx000_common.h b/drivers/media/dvb/frontends/dibx000_common.h index 5e17275afd25..84e4d5362922 100644 --- a/drivers/media/dvb/frontends/dibx000_common.h +++ b/drivers/media/dvb/frontends/dibx000_common.h @@ -128,6 +128,11 @@ enum dibx000_adc_states { (v) == BANDWIDTH_7_MHZ ? 7000 : \ (v) == BANDWIDTH_6_MHZ ? 6000 : 8000 ) +#define BANDWIDTH_TO_INDEX(v) ( \ + (v) == 8000 ? BANDWIDTH_8_MHZ : \ + (v) == 7000 ? BANDWIDTH_7_MHZ : \ + (v) == 6000 ? BANDWIDTH_6_MHZ : BANDWIDTH_8_MHZ ) + /* Chip output mode. */ #define OUTMODE_HIGH_Z 0 #define OUTMODE_MPEG2_PAR_GATED_CLK 1 -- cgit v1.2.3-59-g8ed1b From 4a2b108379743405bc488eaef6a75080aa1bbba4 Mon Sep 17 00:00:00 2001 From: Patrick Boettcher Date: Fri, 25 Jan 2008 07:32:58 -0300 Subject: V4L/DVB (7075): Make a local function static Make a local function static Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dib0700_devices.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 1c6843c631e1..e7093826e975 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -94,7 +94,7 @@ static int bristol_frontend_attach(struct dvb_usb_adapter *adap) (10 + adap->id) << 1, &bristol_dib3000mc_config[adap->id])) == NULL ? -ENODEV : 0; } -int eeprom_read(struct i2c_adapter *adap,u8 adrs,u8 *pval) +static int eeprom_read(struct i2c_adapter *adap,u8 adrs,u8 *pval) { struct i2c_msg msg[2] = { { .addr = 0x50, .flags = 0, .buf = &adrs, .len = 1 }, -- cgit v1.2.3-59-g8ed1b From 386900781205d203c1141d3e2dae759f1b531193 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Mon, 21 Jan 2008 12:15:19 -0300 Subject: V4L/DVB (7077): bt878: remove handcrafted PCI subsystem ID check This patch moves the subsystem ID and subsystem vendor ID check from probing function to the PCI generic function by describing subsystem IDs in pci_device_id table. This enables to add new PCI IDs to a device driver pci_ids table at runtime by new_id file in sysfs pci driver tree. Signed-off-by: Akinobu Mita Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- Documentation/dvb/bt8xx.txt | 12 +++++++ drivers/media/dvb/bt8xx/bt878.c | 76 ++++++++++++++++++----------------------- drivers/media/dvb/bt8xx/bt878.h | 6 ---- 3 files changed, 45 insertions(+), 49 deletions(-) diff --git a/Documentation/dvb/bt8xx.txt b/Documentation/dvb/bt8xx.txt index ecb47adda063..b7b1d1b1da46 100644 --- a/Documentation/dvb/bt8xx.txt +++ b/Documentation/dvb/bt8xx.txt @@ -78,6 +78,18 @@ Example: For a full list of card ID's please see Documentation/video4linux/CARDLIST.bttv. In case of further problems please subscribe and send questions to the mailing list: linux-dvb@linuxtv.org. +2c) Probing the cards with broken PCI subsystem ID +-------------------------------------------------- +There are some TwinHan cards that the EEPROM has become corrupted for some +reason. The cards do not have correct PCI subsystem ID. But we can force +probing the cards with broken PCI subsystem ID + + $ echo 109e 0878 $subvendor $subdevice > \ + /sys/bus/pci/drivers/bt878/new_id + +109e: PCI_VENDOR_ID_BROOKTREE +0878: PCI_DEVICE_ID_BROOKTREE_878 + Authors: Richard Walker, Jamie Honan, Michael Hunold, diff --git a/drivers/media/dvb/bt8xx/bt878.c b/drivers/media/dvb/bt8xx/bt878.c index 85e36a1d6d78..c7bbb40223f5 100644 --- a/drivers/media/dvb/bt8xx/bt878.c +++ b/drivers/media/dvb/bt8xx/bt878.c @@ -378,23 +378,37 @@ bt878_device_control(struct bt878 *bt, unsigned int cmd, union dst_gpio_packet * EXPORT_SYMBOL(bt878_device_control); +#define BROOKTREE_878_DEVICE(vend, dev, name) \ + { \ + .vendor = PCI_VENDOR_ID_BROOKTREE, \ + .device = PCI_DEVICE_ID_BROOKTREE_878, \ + .subvendor = (vend), .subdevice = (dev), \ + .driver_data = (unsigned long) name \ + } -static struct cards card_list[] __devinitdata = { - - { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" }, - { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" }, - { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" }, - { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" }, - { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" }, - { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" }, - { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" }, - { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" }, - { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE, "Ultraview DVB-T Lite" }, - { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" }, - { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV" }, - { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini" } +static struct pci_device_id bt878_pci_tbl[] __devinitdata = { + BROOKTREE_878_DEVICE(0x0071, 0x0101, "Nebula Electronics DigiTV"), + BROOKTREE_878_DEVICE(0x1461, 0x0761, "AverMedia AverTV DVB-T 761"), + BROOKTREE_878_DEVICE(0x11bd, 0x001c, "Pinnacle PCTV Sat"), + BROOKTREE_878_DEVICE(0x11bd, 0x0026, "Pinnacle PCTV SAT CI"), + BROOKTREE_878_DEVICE(0x1822, 0x0001, "Twinhan VisionPlus DVB"), + BROOKTREE_878_DEVICE(0x270f, 0xfc00, + "ChainTech digitop DST-1000 DVB-S"), + BROOKTREE_878_DEVICE(0x1461, 0x0771, "AVermedia AverTV DVB-T 771"), + BROOKTREE_878_DEVICE(0x18ac, 0xdb10, "DViCO FusionHDTV DVB-T Lite"), + BROOKTREE_878_DEVICE(0x18ac, 0xdb11, "Ultraview DVB-T Lite"), + BROOKTREE_878_DEVICE(0x18ac, 0xd500, "DViCO FusionHDTV 5 Lite"), + BROOKTREE_878_DEVICE(0x7063, 0x2000, "pcHDTV HD-2000 TV"), + BROOKTREE_878_DEVICE(0x1822, 0x0026, "DNTV Live! Mini"), + { } }; +MODULE_DEVICE_TABLE(pci, bt878_pci_tbl); + +static const char * __devinit card_name(const struct pci_device_id *id) +{ + return id->driver_data ? (const char *)id->driver_data : "Unknown"; +} /***********************/ /* PCI device handling */ @@ -403,15 +417,13 @@ static struct cards card_list[] __devinitdata = { static int __devinit bt878_probe(struct pci_dev *dev, const struct pci_device_id *pci_id) { - int result = 0, has_dvb = 0, i; + int result = 0; unsigned char lat; struct bt878 *bt; #if defined(__powerpc__) unsigned int cmd; #endif unsigned int cardid; - unsigned short id; - struct cards *dvb_cards; printk(KERN_INFO "bt878: Bt878 AUDIO function found (%d).\n", bt878_num); @@ -423,25 +435,11 @@ static int __devinit bt878_probe(struct pci_dev *dev, if (pci_enable_device(dev)) return -EIO; - pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &id); - cardid = id << 16; - pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &id); - cardid |= id; - - for (i = 0, dvb_cards = card_list; i < ARRAY_SIZE(card_list); i++, dvb_cards++) { - if (cardid == dvb_cards->pci_id) { - printk("%s: card id=[0x%x],[ %s ] has DVB functions.\n", - __func__, cardid, dvb_cards->name); - has_dvb = 1; - } - } + cardid = dev->subsystem_device << 16; + cardid |= dev->subsystem_vendor; - if (!has_dvb) { - printk("%s: card id=[0x%x], Unknown card.\nExiting..\n", __func__, cardid); - result = -EINVAL; - - goto fail0; - } + printk(KERN_INFO "%s: card id=[0x%x],[ %s ] has DVB functions.\n", + __func__, cardid, card_name(pci_id)); bt = &bt878[bt878_num]; bt->dev = dev; @@ -572,14 +570,6 @@ static void __devexit bt878_remove(struct pci_dev *pci_dev) return; } -static struct pci_device_id bt878_pci_tbl[] __devinitdata = { - {PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BROOKTREE_878, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - {0,} -}; - -MODULE_DEVICE_TABLE(pci, bt878_pci_tbl); - static struct pci_driver bt878_pci_driver = { .name = "bt878", .id_table = bt878_pci_tbl, diff --git a/drivers/media/dvb/bt8xx/bt878.h b/drivers/media/dvb/bt8xx/bt878.h index d593bc145628..375fd2892a11 100644 --- a/drivers/media/dvb/bt8xx/bt878.h +++ b/drivers/media/dvb/bt8xx/bt878.h @@ -101,12 +101,6 @@ #define BTTV_BOARD_DVICO_DVBT_LITE 0x80 #define BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE 0x87 -struct cards { - __u32 pci_id; - __u16 card_id; - char *name; -}; - extern int bt878_num; struct bt878 { -- cgit v1.2.3-59-g8ed1b From a999337b49fcdd2c4a475e97e4b8337ebdfa4abf Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 23 Jan 2008 02:39:39 -0300 Subject: V4L/DVB (7078): radio: fix sf16fmi section mismatch isapnp_fmi_probe() is only called by fmi_init(), which is __init, so isapnp_fmi_probe() can also be __init. media/radio/radio-sf16fmi.c: WARNING: vmlinux.o(.text+0x994e19): Section mismatch: reference to .init.data: (between 'isapnp_fmi_probe' and 'vidioc_s_tuner') WARNING: vmlinux.o(.text+0x994e22): Section mismatch: reference to .init.data: (between 'isapnp_fmi_probe' and 'vidioc_s_tuner') WARNING: vmlinux.o(.text+0x994e3a): Section mismatch: reference to .init.data:id_table (between 'isapnp_fmi_probe' and 'vidioc_s_tuner') Signed-off-by: Randy Dunlap Acked-by: Sam Ravnborg Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-sf16fmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/radio/radio-sf16fmi.c b/drivers/media/radio/radio-sf16fmi.c index 395165367f37..3118bdab3183 100644 --- a/drivers/media/radio/radio-sf16fmi.c +++ b/drivers/media/radio/radio-sf16fmi.c @@ -321,7 +321,7 @@ static struct isapnp_device_id id_table[] __devinitdata = { MODULE_DEVICE_TABLE(isapnp, id_table); -static int isapnp_fmi_probe(void) +static int __init isapnp_fmi_probe(void) { int i = 0; -- cgit v1.2.3-59-g8ed1b From b5e1a4e2869af5ffaa102535ad63d184d86e66ec Mon Sep 17 00:00:00 2001 From: Aristeu Rozanski Date: Fri, 25 Jan 2008 22:17:04 +0100 Subject: ide-io: set REQ_FAILED when drive is dead Currently it's possible to ide-cd to set an incorrect blocksize by reading garbage if the drive is dead: ide_cd_probe() -> cdrom_read_toc() -> cdrom_read_capacity() -> cdrom_queue_packet_command() -> ide_do_drive_cmd() -> ide_do_request() -> start_request() on start_request(): /* bail early if we've exceeded max_failures */ if (drive->max_failures && (drive->failures > drive->max_failures)) { goto kill_rq; } (...) kill_rq: ide_kill_rq(drive, rq); return ide_stopped; ide_kill_rq() and the next calls won't set REQ_FAILED on rq->cmd_flags and thus cdrom_queue_packet_command() won't return an error. then: stat = cdrom_queue_packet_command(drive, &req); if (stat == 0) { *capacity = 1 + be32_to_cpu(capbuf.lba); *sectors_per_frame = be32_to_cpu(capbuf.blocklen) >> SECTOR_BITS; } cdrom_read_capacity() ends believing capbuf is valid but in fact it's just uninitialized data. back to cdrom_read_toc(): /* Try to get the total cdrom capacity and sector size. */ stat = cdrom_read_capacity(drive, &toc->capacity, §ors_per_frame, sense); if (stat) toc->capacity = 0x1fffff; set_capacity(info->disk, toc->capacity * sectors_per_frame); /* Save a private copy of te TOC capacity for error handling */ drive->probed_capacity = toc->capacity * sectors_per_frame; blk_queue_hardsect_size(drive->queue, sectors_per_frame << SECTOR_BITS); that will set drive->queue->hardsect_size to be the random value. hardsect_size is used to calculate inode->i_blkbits. later on, on a read path: void create_empty_buffers(struct page *page, unsigned long blocksize, unsigned long b_state) { struct buffer_head *bh, *head, *tail; head = alloc_page_buffers(page, blocksize, 1); bh = head; do { bh->b_state |= b_state; tail = bh; bh = bh->b_this_page; } while (bh); tail->b_this_page = head; alloc_page_buffers() will return NULL if blocksize > 4096. blocksize is calculed based on inode->i_blkbits. that will trigger a null dereference on create_empty_buffers(). Signed-off-by: Aristeu Rozanski Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index bef781fec500..bb1b0a884cfc 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -1003,6 +1003,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) /* bail early if we've exceeded max_failures */ if (drive->max_failures && (drive->failures > drive->max_failures)) { + rq->cmd_flags |= REQ_FAILED; goto kill_rq; } -- cgit v1.2.3-59-g8ed1b From ceb1b2c583a9503e3ae68c4e7c652637971e3768 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 25 Jan 2008 22:17:04 +0100 Subject: hpt366: change timing register masks Since PIO autotuning is now done always, there's no need anymore to program the taskfile timings also on DMA modes, so change the IDE timing register masks accordingly, "inverting the polarity" of the masks while at it... Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/hpt366.c | 30 +++++++++++++----------------- 1 file changed, 13 insertions(+), 17 deletions(-) diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index 9fce25bdec8a..edb267c78afc 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/hpt366.c Version 1.22 Dec 4, 2007 + * linux/drivers/ide/pci/hpt366.c Version 1.23 Dec 7, 2007 * * Copyright (C) 1999-2003 Andre Hedrick * Portions Copyright (C) 2001 Sun Microsystems, Inc. @@ -689,19 +689,17 @@ static void hpt36x_set_mode(ide_drive_t *drive, const u8 speed) struct hpt_info *info = pci_get_drvdata(dev); u8 itr_addr = drive->dn ? 0x44 : 0x40; u32 old_itr = 0; - u32 itr_mask, new_itr; - - itr_mask = speed < XFER_MW_DMA_0 ? 0x30070000 : - (speed < XFER_UDMA_0 ? 0xc0070000 : 0xc03800ff); - - new_itr = get_speed_setting(speed, info); + u32 new_itr = get_speed_setting(speed, info); + u32 itr_mask = speed < XFER_MW_DMA_0 ? 0xc1f8ffff : + (speed < XFER_UDMA_0 ? 0x303800ff : + 0x30070000); + pci_read_config_dword(dev, itr_addr, &old_itr); + new_itr = (old_itr & ~itr_mask) | (new_itr & itr_mask); /* * Disable on-chip PIO FIFO/buffer (and PIO MST mode as well) * to avoid problems handling I/O errors later */ - pci_read_config_dword(dev, itr_addr, &old_itr); - new_itr = (new_itr & ~itr_mask) | (old_itr & itr_mask); new_itr &= ~0xc0000000; pci_write_config_dword(dev, itr_addr, new_itr); @@ -714,16 +712,14 @@ static void hpt37x_set_mode(ide_drive_t *drive, const u8 speed) struct hpt_info *info = pci_get_drvdata(dev); u8 itr_addr = 0x40 + (drive->dn * 4); u32 old_itr = 0; - u32 itr_mask, new_itr; - - itr_mask = speed < XFER_MW_DMA_0 ? 0x303c0000 : - (speed < XFER_UDMA_0 ? 0xc03c0000 : 0xc1c001ff); - - new_itr = get_speed_setting(speed, info); + u32 new_itr = get_speed_setting(speed, info); + u32 itr_mask = speed < XFER_MW_DMA_0 ? 0xcfc3ffff : + (speed < XFER_UDMA_0 ? 0x31c001ff : + 0x303c0000); pci_read_config_dword(dev, itr_addr, &old_itr); - new_itr = (new_itr & ~itr_mask) | (old_itr & itr_mask); - + new_itr = (old_itr & ~itr_mask) | (new_itr & itr_mask); + if (speed < XFER_MW_DMA_0) new_itr &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */ pci_write_config_dword(dev, itr_addr, new_itr); -- cgit v1.2.3-59-g8ed1b From a488f34e0dc7180f35fe48a60596fc82fe69d3ef Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 25 Jan 2008 22:17:05 +0100 Subject: hpt366: kill set_dma_mode() method wrapper There's no reason to keep the set_dma_mode() method wrapper for two different chip families, so get rid of it... Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/hpt366.c | 21 +++++++-------------- 1 file changed, 7 insertions(+), 14 deletions(-) diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index edb267c78afc..faf77fd2e4ef 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/hpt366.c Version 1.23 Dec 7, 2007 + * linux/drivers/ide/pci/hpt366.c Version 1.24 Dec 8, 2007 * * Copyright (C) 1999-2003 Andre Hedrick * Portions Copyright (C) 2001 Sun Microsystems, Inc. @@ -725,20 +725,9 @@ static void hpt37x_set_mode(ide_drive_t *drive, const u8 speed) pci_write_config_dword(dev, itr_addr, new_itr); } -static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed) -{ - ide_hwif_t *hwif = HWIF(drive); - struct hpt_info *info = pci_get_drvdata(hwif->pci_dev); - - if (info->chip_type >= HPT370) - hpt37x_set_mode(drive, speed); - else /* hpt368: hpt_minimum_revision(dev, 2) */ - hpt36x_set_mode(drive, speed); -} - static void hpt3xx_set_pio_mode(ide_drive_t *drive, const u8 pio) { - hpt3xx_set_mode(drive, XFER_PIO_0 + pio); + HWIF(drive)->set_dma_mode(drive, XFER_PIO_0 + pio); } static int hpt3xx_quirkproc(ide_drive_t *drive) @@ -1315,7 +1304,11 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) hwif->select_data = hwif->channel ? 0x54 : 0x50; hwif->set_pio_mode = &hpt3xx_set_pio_mode; - hwif->set_dma_mode = &hpt3xx_set_mode; + if (chip_type >= HPT370) + hwif->set_dma_mode = &hpt37x_set_mode; + else + hwif->set_dma_mode = &hpt36x_set_mode; + hwif->quirkproc = &hpt3xx_quirkproc; hwif->intrproc = &hpt3xx_intrproc; hwif->maskproc = &hpt3xx_maskproc; -- cgit v1.2.3-59-g8ed1b From 866664d79f6a920af07e6503f64366f4c5b2d41f Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 25 Jan 2008 22:17:05 +0100 Subject: hpt366: merge set_dma_mode() methods Group the array of pointers to the timing tables with the timing register masks which allows us to merge HPT36x/HPT37x set_dma_mode() methods into one. Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/hpt366.c | 129 +++++++++++++++++++++-------------------------- 1 file changed, 58 insertions(+), 71 deletions(-) diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index faf77fd2e4ef..df14d692743c 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/hpt366.c Version 1.24 Dec 8, 2007 + * linux/drivers/ide/pci/hpt366.c Version 1.30 Dec 12, 2007 * * Copyright (C) 1999-2003 Andre Hedrick * Portions Copyright (C) 2001 Sun Microsystems, Inc. @@ -88,7 +88,7 @@ * - rename all the register related variables consistently * - move all the interrupt twiddling code from the speedproc handlers into * init_hwif_hpt366(), also grouping all the DMA related code together there - * - merge two HPT37x speedproc handlers, fix the PIO timing register mask and + * - merge HPT36x/HPT37x speedproc handlers, fix PIO timing register mask and * separate the UltraDMA and MWDMA masks there to avoid changing PIO timings * when setting an UltraDMA mode * - fix hpt3xx_tune_drive() to set the PIO mode requested, not always select @@ -458,6 +458,13 @@ enum ata_clock { NUM_ATA_CLOCKS }; +struct hpt_timings { + u32 pio_mask; + u32 dma_mask; + u32 ultra_mask; + u32 *clock_table[NUM_ATA_CLOCKS]; +}; + /* * Hold all the HighPoint chip information in one place. */ @@ -468,7 +475,8 @@ struct hpt_info { u8 udma_mask; /* Allowed UltraDMA modes mask. */ u8 dpll_clk; /* DPLL clock in MHz */ u8 pci_clk; /* PCI clock in MHz */ - u32 **settings; /* Chipset settings table */ + struct hpt_timings *timings; /* Chipset timing data */ + u8 clock; /* ATA clock selected */ }; /* Supported HighPoint chips */ @@ -486,20 +494,30 @@ enum { HPT371N }; -static u32 *hpt36x_settings[NUM_ATA_CLOCKS] = { - twenty_five_base_hpt36x, - thirty_three_base_hpt36x, - forty_base_hpt36x, - NULL, - NULL +static struct hpt_timings hpt36x_timings = { + .pio_mask = 0xc1f8ffff, + .dma_mask = 0x303800ff, + .ultra_mask = 0x30070000, + .clock_table = { + [ATA_CLOCK_25MHZ] = twenty_five_base_hpt36x, + [ATA_CLOCK_33MHZ] = thirty_three_base_hpt36x, + [ATA_CLOCK_40MHZ] = forty_base_hpt36x, + [ATA_CLOCK_50MHZ] = NULL, + [ATA_CLOCK_66MHZ] = NULL + } }; -static u32 *hpt37x_settings[NUM_ATA_CLOCKS] = { - NULL, - thirty_three_base_hpt37x, - NULL, - fifty_base_hpt37x, - sixty_six_base_hpt37x +static struct hpt_timings hpt37x_timings = { + .pio_mask = 0xcfc3ffff, + .dma_mask = 0x31c001ff, + .ultra_mask = 0x303c0000, + .clock_table = { + [ATA_CLOCK_25MHZ] = NULL, + [ATA_CLOCK_33MHZ] = thirty_three_base_hpt37x, + [ATA_CLOCK_40MHZ] = NULL, + [ATA_CLOCK_50MHZ] = fifty_base_hpt37x, + [ATA_CLOCK_66MHZ] = sixty_six_base_hpt37x + } }; static const struct hpt_info hpt36x __devinitdata = { @@ -507,7 +525,7 @@ static const struct hpt_info hpt36x __devinitdata = { .chip_type = HPT36x, .udma_mask = HPT366_ALLOW_ATA66_3 ? (HPT366_ALLOW_ATA66_4 ? ATA_UDMA4 : ATA_UDMA3) : ATA_UDMA2, .dpll_clk = 0, /* no DPLL */ - .settings = hpt36x_settings + .timings = &hpt36x_timings }; static const struct hpt_info hpt370 __devinitdata = { @@ -515,7 +533,7 @@ static const struct hpt_info hpt370 __devinitdata = { .chip_type = HPT370, .udma_mask = HPT370_ALLOW_ATA100_5 ? ATA_UDMA5 : ATA_UDMA4, .dpll_clk = 48, - .settings = hpt37x_settings + .timings = &hpt37x_timings }; static const struct hpt_info hpt370a __devinitdata = { @@ -523,7 +541,7 @@ static const struct hpt_info hpt370a __devinitdata = { .chip_type = HPT370A, .udma_mask = HPT370_ALLOW_ATA100_5 ? ATA_UDMA5 : ATA_UDMA4, .dpll_clk = 48, - .settings = hpt37x_settings + .timings = &hpt37x_timings }; static const struct hpt_info hpt374 __devinitdata = { @@ -531,7 +549,7 @@ static const struct hpt_info hpt374 __devinitdata = { .chip_type = HPT374, .udma_mask = ATA_UDMA5, .dpll_clk = 48, - .settings = hpt37x_settings + .timings = &hpt37x_timings }; static const struct hpt_info hpt372 __devinitdata = { @@ -539,7 +557,7 @@ static const struct hpt_info hpt372 __devinitdata = { .chip_type = HPT372, .udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, .dpll_clk = 55, - .settings = hpt37x_settings + .timings = &hpt37x_timings }; static const struct hpt_info hpt372a __devinitdata = { @@ -547,7 +565,7 @@ static const struct hpt_info hpt372a __devinitdata = { .chip_type = HPT372A, .udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, .dpll_clk = 66, - .settings = hpt37x_settings + .timings = &hpt37x_timings }; static const struct hpt_info hpt302 __devinitdata = { @@ -555,7 +573,7 @@ static const struct hpt_info hpt302 __devinitdata = { .chip_type = HPT302, .udma_mask = HPT302_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, .dpll_clk = 66, - .settings = hpt37x_settings + .timings = &hpt37x_timings }; static const struct hpt_info hpt371 __devinitdata = { @@ -563,7 +581,7 @@ static const struct hpt_info hpt371 __devinitdata = { .chip_type = HPT371, .udma_mask = HPT371_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, .dpll_clk = 66, - .settings = hpt37x_settings + .timings = &hpt37x_timings }; static const struct hpt_info hpt372n __devinitdata = { @@ -571,7 +589,7 @@ static const struct hpt_info hpt372n __devinitdata = { .chip_type = HPT372N, .udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, .dpll_clk = 77, - .settings = hpt37x_settings + .timings = &hpt37x_timings }; static const struct hpt_info hpt302n __devinitdata = { @@ -579,7 +597,7 @@ static const struct hpt_info hpt302n __devinitdata = { .chip_type = HPT302N, .udma_mask = HPT302_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, .dpll_clk = 77, - .settings = hpt37x_settings + .timings = &hpt37x_timings }; static const struct hpt_info hpt371n __devinitdata = { @@ -587,7 +605,7 @@ static const struct hpt_info hpt371n __devinitdata = { .chip_type = HPT371N, .udma_mask = HPT371_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5, .dpll_clk = 77, - .settings = hpt37x_settings + .timings = &hpt37x_timings }; static int check_in_drive_list(ide_drive_t *drive, const char **list) @@ -675,24 +693,21 @@ static u32 get_speed_setting(u8 speed, struct hpt_info *info) for (i = 0; i < ARRAY_SIZE(xfer_speeds) - 1; i++) if (xfer_speeds[i] == speed) break; - /* - * NOTE: info->settings only points to the pointer - * to the list of the actual register values - */ - return (*info->settings)[i]; + + return info->timings->clock_table[info->clock][i]; } -static void hpt36x_set_mode(ide_drive_t *drive, const u8 speed) +static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed) { - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = hwif->pci_dev; + struct pci_dev *dev = HWIF(drive)->pci_dev; struct hpt_info *info = pci_get_drvdata(dev); - u8 itr_addr = drive->dn ? 0x44 : 0x40; + struct hpt_timings *t = info->timings; + u8 itr_addr = 0x40 + (drive->dn * 4); u32 old_itr = 0; u32 new_itr = get_speed_setting(speed, info); - u32 itr_mask = speed < XFER_MW_DMA_0 ? 0xc1f8ffff : - (speed < XFER_UDMA_0 ? 0x303800ff : - 0x30070000); + u32 itr_mask = speed < XFER_MW_DMA_0 ? t->pio_mask : + (speed < XFER_UDMA_0 ? t->dma_mask : + t->ultra_mask); pci_read_config_dword(dev, itr_addr, &old_itr); new_itr = (old_itr & ~itr_mask) | (new_itr & itr_mask); @@ -705,29 +720,9 @@ static void hpt36x_set_mode(ide_drive_t *drive, const u8 speed) pci_write_config_dword(dev, itr_addr, new_itr); } -static void hpt37x_set_mode(ide_drive_t *drive, const u8 speed) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = hwif->pci_dev; - struct hpt_info *info = pci_get_drvdata(dev); - u8 itr_addr = 0x40 + (drive->dn * 4); - u32 old_itr = 0; - u32 new_itr = get_speed_setting(speed, info); - u32 itr_mask = speed < XFER_MW_DMA_0 ? 0xcfc3ffff : - (speed < XFER_UDMA_0 ? 0x31c001ff : - 0x303c0000); - - pci_read_config_dword(dev, itr_addr, &old_itr); - new_itr = (old_itr & ~itr_mask) | (new_itr & itr_mask); - - if (speed < XFER_MW_DMA_0) - new_itr &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */ - pci_write_config_dword(dev, itr_addr, new_itr); -} - static void hpt3xx_set_pio_mode(ide_drive_t *drive, const u8 pio) { - HWIF(drive)->set_dma_mode(drive, XFER_PIO_0 + pio); + hpt3xx_set_mode(drive, XFER_PIO_0 + pio); } static int hpt3xx_quirkproc(ide_drive_t *drive) @@ -1195,7 +1190,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha * We also don't like using the DPLL because this causes glitches * on PRST-/SRST- when the state engine gets reset... */ - if (chip_type >= HPT374 || info->settings[clock] == NULL) { + if (chip_type >= HPT374 || info->timings->clock_table[clock] == NULL) { u16 f_low, delta = pci_clk < 50 ? 2 : 4; int adjust; @@ -1211,7 +1206,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha clock = ATA_CLOCK_50MHZ; } - if (info->settings[clock] == NULL) { + if (info->timings->clock_table[clock] == NULL) { printk(KERN_ERR "%s: unknown bus timing!\n", name); kfree(info); return -EIO; @@ -1252,15 +1247,10 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha printk("%s: using %d MHz PCI clock\n", name, pci_clk); } - /* - * Advance the table pointer to a slot which points to the list - * of the register values settings matching the clock being used. - */ - info->settings += clock; - /* Store the clock frequencies. */ info->dpll_clk = dpll_clk; info->pci_clk = pci_clk; + info->clock = clock; /* Point to this chip's own instance of the hpt_info structure. */ pci_set_drvdata(dev, info); @@ -1304,10 +1294,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) hwif->select_data = hwif->channel ? 0x54 : 0x50; hwif->set_pio_mode = &hpt3xx_set_pio_mode; - if (chip_type >= HPT370) - hwif->set_dma_mode = &hpt37x_set_mode; - else - hwif->set_dma_mode = &hpt36x_set_mode; + hwif->set_dma_mode = &hpt3xx_set_mode; hwif->quirkproc = &hpt3xx_quirkproc; hwif->intrproc = &hpt3xx_intrproc; -- cgit v1.2.3-59-g8ed1b From 1c029fd658baa2442e8e51dc9c819301cad95777 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:05 +0100 Subject: ide: remove ->dma_master field from ide_hwif_t (take 5) * Convert cmd64x, hpt366 and pdc202xx_old host drivers to use pci_resource_start(hwif->pci_dev, 4) instead of hwif->dma_master. * Remove no longer needed ->dma_master field from ide_hwif_t. v2: * Use the more readable 'hwif->dma_base - (hwif->channel * 8)' instead of pci_resource_start(hwif->pci_dev, 4). v3: * Use hwif->extra_base in hpt366/pdc20xx_old + some cosmetic fixups over v2 (suggested by Sergei). v4: * Correct offsets in hpt3xxn_set_clock(). v5: * Use hwif->extra_base in hpt366 for _real_ this time. (Noticed by Sergei) Acked-by: Sergei Shtylyov Cc: Jeff Garzik Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-dma.c | 7 ------- drivers/ide/ide.c | 2 -- drivers/ide/pci/cmd64x.c | 8 +++++--- drivers/ide/pci/hpt366.c | 21 +++++++++++---------- drivers/ide/pci/pdc202xx_old.c | 12 ++++++------ include/linux/ide.h | 1 - 6 files changed, 22 insertions(+), 29 deletions(-) diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 4703837bf1fc..7568c3e81f2f 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -968,11 +968,6 @@ void ide_setup_dma(ide_hwif_t *hwif, unsigned long base, unsigned num_ports) hwif->dma_base = base; - if (hwif->mate) - hwif->dma_master = hwif->channel ? hwif->mate->dma_base : base; - else - hwif->dma_master = base; - if (!(hwif->dma_command)) hwif->dma_command = hwif->dma_base; if (!(hwif->dma_vendor1)) @@ -1014,8 +1009,6 @@ void ide_setup_dma(ide_hwif_t *hwif, unsigned long base, unsigned num_ports) hwif->drives[1].name, (dma_stat & 0x40) ? "DMA" : "pio"); } printk("\n"); - - BUG_ON(!hwif->dma_master); } EXPORT_SYMBOL_GPL(ide_setup_dma); diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 54943da6e4e5..9ab5458fe950 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -468,7 +468,6 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif) #endif hwif->dma_base = tmp_hwif->dma_base; - hwif->dma_master = tmp_hwif->dma_master; hwif->dma_command = tmp_hwif->dma_command; hwif->dma_vendor1 = tmp_hwif->dma_vendor1; hwif->dma_status = tmp_hwif->dma_status; @@ -602,7 +601,6 @@ void ide_unregister(unsigned int index) (void) ide_release_dma(hwif); hwif->dma_base = 0; - hwif->dma_master = 0; hwif->dma_command = 0; hwif->dma_vendor1 = 0; hwif->dma_status = 0; diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c index bc553337b1be..f3613bac9dbe 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/pci/cmd64x.c @@ -333,14 +333,15 @@ static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed) static int cmd648_ide_dma_end (ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); + unsigned long base = hwif->dma_base - (hwif->channel * 8); int err = __ide_dma_end(drive); u8 irq_mask = hwif->channel ? MRDMODE_INTR_CH1 : MRDMODE_INTR_CH0; - u8 mrdmode = inb(hwif->dma_master + 0x01); + u8 mrdmode = inb(base + 1); /* clear the interrupt bit */ outb((mrdmode & ~(MRDMODE_INTR_CH0 | MRDMODE_INTR_CH1)) | irq_mask, - hwif->dma_master + 0x01); + base + 1); return err; } @@ -365,10 +366,11 @@ static int cmd64x_ide_dma_end (ide_drive_t *drive) static int cmd648_ide_dma_test_irq (ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); + unsigned long base = hwif->dma_base - (hwif->channel * 8); u8 irq_mask = hwif->channel ? MRDMODE_INTR_CH1 : MRDMODE_INTR_CH0; u8 dma_stat = inb(hwif->dma_status); - u8 mrdmode = inb(hwif->dma_master + 0x01); + u8 mrdmode = inb(base + 1); #ifdef DEBUG printk("%s: dma_stat: 0x%02x mrdmode: 0x%02x irq_mask: 0x%02x\n", diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index df14d692743c..d3826a66834d 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -894,32 +894,33 @@ static int hpt374_ide_dma_end(ide_drive_t *drive) static void hpt3xxn_set_clock(ide_hwif_t *hwif, u8 mode) { - u8 scr2 = inb(hwif->dma_master + 0x7b); + unsigned long base = hwif->extra_base; + u8 scr2 = inb(base + 0x6b); if ((scr2 & 0x7f) == mode) return; /* Tristate the bus */ - outb(0x80, hwif->dma_master + 0x73); - outb(0x80, hwif->dma_master + 0x77); + outb(0x80, base + 0x63); + outb(0x80, base + 0x67); /* Switch clock and reset channels */ - outb(mode, hwif->dma_master + 0x7b); - outb(0xc0, hwif->dma_master + 0x79); + outb(mode, base + 0x6b); + outb(0xc0, base + 0x69); /* * Reset the state machines. * NOTE: avoid accidentally enabling the disabled channels. */ - outb(inb(hwif->dma_master + 0x70) | 0x32, hwif->dma_master + 0x70); - outb(inb(hwif->dma_master + 0x74) | 0x32, hwif->dma_master + 0x74); + outb(inb(base + 0x60) | 0x32, base + 0x60); + outb(inb(base + 0x64) | 0x32, base + 0x64); /* Complete reset */ - outb(0x00, hwif->dma_master + 0x79); + outb(0x00, base + 0x69); /* Reconnect channels to bus */ - outb(0x00, hwif->dma_master + 0x73); - outb(0x00, hwif->dma_master + 0x77); + outb(0x00, base + 0x63); + outb(0x00, base + 0x67); } /** diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c index e09742e2ba59..22c7a7533b69 100644 --- a/drivers/ide/pci/pdc202xx_old.c +++ b/drivers/ide/pci/pdc202xx_old.c @@ -162,7 +162,7 @@ static u8 pdc202xx_old_cable_detect (ide_hwif_t *hwif) */ static void pdc_old_enable_66MHz_clock(ide_hwif_t *hwif) { - unsigned long clock_reg = hwif->dma_master + 0x11; + unsigned long clock_reg = hwif->extra_base + 0x01; u8 clock = inb(clock_reg); outb(clock | (hwif->channel ? 0x08 : 0x02), clock_reg); @@ -170,7 +170,7 @@ static void pdc_old_enable_66MHz_clock(ide_hwif_t *hwif) static void pdc_old_disable_66MHz_clock(ide_hwif_t *hwif) { - unsigned long clock_reg = hwif->dma_master + 0x11; + unsigned long clock_reg = hwif->extra_base + 0x01; u8 clock = inb(clock_reg); outb(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg); @@ -193,7 +193,7 @@ static void pdc202xx_old_ide_dma_start(ide_drive_t *drive) if (drive->media != ide_disk || drive->addressing == 1) { struct request *rq = HWGROUP(drive)->rq; ide_hwif_t *hwif = HWIF(drive); - unsigned long high_16 = hwif->dma_master; + unsigned long high_16 = hwif->extra_base - 16; unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20); u32 word_count = 0; u8 clock = inb(high_16 + 0x11); @@ -212,7 +212,7 @@ static int pdc202xx_old_ide_dma_end(ide_drive_t *drive) { if (drive->media != ide_disk || drive->addressing == 1) { ide_hwif_t *hwif = HWIF(drive); - unsigned long high_16 = hwif->dma_master; + unsigned long high_16 = hwif->extra_base - 16; unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20); u8 clock = 0; @@ -228,7 +228,7 @@ static int pdc202xx_old_ide_dma_end(ide_drive_t *drive) static int pdc202xx_old_ide_dma_test_irq(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); - unsigned long high_16 = hwif->dma_master; + unsigned long high_16 = hwif->extra_base - 16; u8 dma_stat = inb(hwif->dma_status); u8 sc1d = inb(high_16 + 0x001d); @@ -271,7 +271,7 @@ static void pdc202xx_dma_timeout(ide_drive_t *drive) static void pdc202xx_reset_host (ide_hwif_t *hwif) { - unsigned long high_16 = hwif->dma_master; + unsigned long high_16 = hwif->extra_base - 16; u8 udma_speed_flag = inb(high_16 | 0x001f); outb(udma_speed_flag | 0x10, high_16 | 0x001f); diff --git a/include/linux/ide.h b/include/linux/ide.h index 9a6a41e7079f..1fb03b630676 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -766,7 +766,6 @@ typedef struct hwif_s { int rqsize; /* max sectors per request */ int irq; /* our irq number */ - unsigned long dma_master; /* reference base addr dmabase */ unsigned long dma_base; /* base addr for dma ports */ unsigned long dma_command; /* dma command register */ unsigned long dma_vendor1; /* dma vendor 1 register */ -- cgit v1.2.3-59-g8ed1b From cd2a2d969761c26542095c01324201ca0b3ee896 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:06 +0100 Subject: ide: remove task_ioreg_t typedef (take 2) Remove task_ioreg_t typedef from the kernel code (but leave it in for #ifndef/#endif __KERNEL__ case). While at it also move sata_ioreg_t typedef under #ifndef/#endif __KERNEL__. v2: Remove name of the second parameter from ide_execute_command() declaration. (Noticed by Sergei). Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 20 ++++++++++---------- drivers/ide/ide-iops.c | 5 +++-- drivers/ide/ide-taskfile.c | 4 ++-- include/linux/hdreg.h | 46 +++++++++++++++++++++++----------------------- include/linux/ide.h | 7 ++++--- 5 files changed, 42 insertions(+), 40 deletions(-) diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index b1781908e1f2..322c4691836a 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -138,7 +138,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, ide_hwif_t *hwif = HWIF(drive); unsigned int dma = drive->using_dma; u8 lba48 = (drive->addressing == 1) ? 1 : 0; - task_ioreg_t command = WIN_NOP; + u8 command = WIN_NOP; ata_nsector_t nsectors; nsectors.all = (u16) rq->nr_sectors; @@ -162,7 +162,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, if (drive->select.b.lba) { if (lba48) { - task_ioreg_t tasklets[10]; + u8 tasklets[10]; pr_debug("%s: LBA=0x%012llx\n", drive->name, (unsigned long long)block); @@ -171,16 +171,16 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, tasklets[1] = 0; tasklets[2] = nsectors.b.low; tasklets[3] = nsectors.b.high; - tasklets[4] = (task_ioreg_t) block; - tasklets[5] = (task_ioreg_t) (block>>8); - tasklets[6] = (task_ioreg_t) (block>>16); - tasklets[7] = (task_ioreg_t) (block>>24); + tasklets[4] = (u8) block; + tasklets[5] = (u8)(block >> 8); + tasklets[6] = (u8)(block >> 16); + tasklets[7] = (u8)(block >> 24); if (sizeof(block) == 4) { - tasklets[8] = (task_ioreg_t) 0; - tasklets[9] = (task_ioreg_t) 0; + tasklets[8] = 0; + tasklets[9] = 0; } else { - tasklets[8] = (task_ioreg_t)((u64)block >> 32); - tasklets[9] = (task_ioreg_t)((u64)block >> 40); + tasklets[8] = (u8)((u64)block >> 32); + tasklets[9] = (u8)((u64)block >> 40); } #ifdef DEBUG printk("%s: 0x%02x%02x 0x%02x%02x%02x%02x%02x%02x\n", diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index bb9693dabe41..f4e8a0cf06e2 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -902,8 +902,9 @@ EXPORT_SYMBOL(ide_set_handler); * handler and IRQ setup do not race. All IDE command kick off * should go via this function or do equivalent locking. */ - -void ide_execute_command(ide_drive_t *drive, task_ioreg_t cmd, ide_handler_t *handler, unsigned timeout, ide_expiry_t *expiry) + +void ide_execute_command(ide_drive_t *drive, u8 cmd, ide_handler_t *handler, + unsigned timeout, ide_expiry_t *expiry) { unsigned long flags; ide_hwgroup_t *hwgroup = HWGROUP(drive); diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 2b60f1b0437e..91948a46cc6e 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -519,8 +519,8 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) ide_task_t args; u8 *outbuf = NULL; u8 *inbuf = NULL; - task_ioreg_t *argsptr = args.tfRegister; - task_ioreg_t *hobsptr = args.hobRegister; + u8 *argsptr = args.tfRegister; + u8 *hobsptr = args.hobRegister; int err = 0; int tasksize = sizeof(struct ide_task_request_s); unsigned int taskin = 0; diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h index 818c6afc1091..3bcb88560418 100644 --- a/include/linux/hdreg.h +++ b/include/linux/hdreg.h @@ -87,10 +87,10 @@ #ifndef __KERNEL__ #define IDE_TASKFILE_STD_OUT_FLAGS 0xFE #define IDE_HOB_STD_OUT_FLAGS 0x3C -#endif typedef unsigned char task_ioreg_t; typedef unsigned long sata_ioreg_t; +#endif typedef union ide_reg_valid_s { unsigned all : 16; @@ -116,8 +116,8 @@ typedef union ide_reg_valid_s { } ide_reg_valid_t; typedef struct ide_task_request_s { - task_ioreg_t io_ports[8]; - task_ioreg_t hob_ports[8]; + __u8 io_ports[8]; + __u8 hob_ports[8]; ide_reg_valid_t out_flags; ide_reg_valid_t in_flags; int data_phase; @@ -133,32 +133,32 @@ typedef struct ide_ioctl_request_s { } ide_ioctl_request_t; struct hd_drive_cmd_hdr { - task_ioreg_t command; - task_ioreg_t sector_number; - task_ioreg_t feature; - task_ioreg_t sector_count; + __u8 command; + __u8 sector_number; + __u8 feature; + __u8 sector_count; }; typedef struct hd_drive_task_hdr { - task_ioreg_t data; - task_ioreg_t feature; - task_ioreg_t sector_count; - task_ioreg_t sector_number; - task_ioreg_t low_cylinder; - task_ioreg_t high_cylinder; - task_ioreg_t device_head; - task_ioreg_t command; + __u8 data; + __u8 feature; + __u8 sector_count; + __u8 sector_number; + __u8 low_cylinder; + __u8 high_cylinder; + __u8 device_head; + __u8 command; } task_struct_t; typedef struct hd_drive_hob_hdr { - task_ioreg_t data; - task_ioreg_t feature; - task_ioreg_t sector_count; - task_ioreg_t sector_number; - task_ioreg_t low_cylinder; - task_ioreg_t high_cylinder; - task_ioreg_t device_head; - task_ioreg_t control; + __u8 data; + __u8 feature; + __u8 sector_count; + __u8 sector_number; + __u8 low_cylinder; + __u8 high_cylinder; + __u8 device_head; + __u8 control; } hob_struct_t; #define TASKFILE_INVALID 0x7fff diff --git a/include/linux/ide.h b/include/linux/ide.h index 1fb03b630676..66a38f101175 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1019,7 +1019,8 @@ int ide_end_dequeued_request(ide_drive_t *drive, struct request *rq, extern void ide_set_handler (ide_drive_t *drive, ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry); -extern void ide_execute_command(ide_drive_t *, task_ioreg_t cmd, ide_handler_t *, unsigned int, ide_expiry_t *); +void ide_execute_command(ide_drive_t *, u8, ide_handler_t *, unsigned int, + ide_expiry_t *); ide_startstop_t __ide_error(ide_drive_t *, struct request *, u8, u8); @@ -1068,8 +1069,8 @@ typedef struct ide_task_s { * struct hd_drive_hob_hdr hobf; * hob_struct_t hobf; */ - task_ioreg_t tfRegister[8]; - task_ioreg_t hobRegister[8]; + u8 tfRegister[8]; + u8 hobRegister[8]; ide_reg_valid_t tf_out_flags; ide_reg_valid_t tf_in_flags; int data_phase; -- cgit v1.2.3-59-g8ed1b From 650d841d9e053a618dd8ce753422f91b493cf2f6 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:06 +0100 Subject: ide: add struct ide_taskfile (take 2) * Don't set write-only ide_task_t.hobRegister[6] and ide_task_t.hobRegister[7] in idedisk_set_max_address_ext(). * Add struct ide_taskfile and use it in ide_task_t instead of tfRegister[] and hobRegister[]. * Remove no longer needed IDE_CONTROL_OFFSET_HOB define. * Add #ifndef/#endif __KERNEL__ around definitions of {task,hob}_struct_t. While at it: * Use ATA_LBA define for LBA bit (0x40) as suggested by Tejun Heo. v2: * Add missing newlines. (Noticed by Sergei) * Use ~ATA_LBA instead of 0xBF. (Noticed by Sergei) * Use unnamed unions for error/feature and status/command. (Suggested by Sergei). There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov Cc: Tejun Heo Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-acpi.c | 8 +-- drivers/ide/ide-disk.c | 120 +++++++++++++++++++++------------------------ drivers/ide/ide-io.c | 61 ++++++++++++----------- drivers/ide/ide-iops.c | 12 ++--- drivers/ide/ide-lib.c | 3 +- drivers/ide/ide-taskfile.c | 99 +++++++++++++++++-------------------- include/linux/hdreg.h | 4 +- include/linux/ide.h | 43 ++++++++++++---- 8 files changed, 179 insertions(+), 171 deletions(-) diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index 899d56536e80..747c51889f7d 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -388,13 +388,7 @@ static int taskfile_load_raw(ide_drive_t *drive, args.handler = &task_no_data_intr; /* convert gtf to IDE Taskfile */ - args.tfRegister[1] = gtf->tfa[0]; /* 0x1f1 */ - args.tfRegister[2] = gtf->tfa[1]; /* 0x1f2 */ - args.tfRegister[3] = gtf->tfa[2]; /* 0x1f3 */ - args.tfRegister[4] = gtf->tfa[3]; /* 0x1f4 */ - args.tfRegister[5] = gtf->tfa[4]; /* 0x1f5 */ - args.tfRegister[6] = gtf->tfa[5]; /* 0x1f6 */ - args.tfRegister[7] = gtf->tfa[6]; /* 0x1f7 */ + memcpy(&args.tf_array[7], >f->tfa, 7); if (ide_noacpitfs) { DEBPRINT("_GTF execution disabled\n"); diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 322c4691836a..a4c4d4350560 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -310,23 +310,22 @@ static ide_startstop_t ide_do_rw_disk (ide_drive_t *drive, struct request *rq, s static unsigned long idedisk_read_native_max_address(ide_drive_t *drive) { ide_task_t args; + struct ide_taskfile *tf = &args.tf; unsigned long addr = 0; /* Create IDE/ATA command request structure */ memset(&args, 0, sizeof(ide_task_t)); - args.tfRegister[IDE_SELECT_OFFSET] = 0x40; - args.tfRegister[IDE_COMMAND_OFFSET] = WIN_READ_NATIVE_MAX; + tf->device = ATA_LBA; + tf->command = WIN_READ_NATIVE_MAX; args.command_type = IDE_DRIVE_TASK_NO_DATA; args.handler = &task_no_data_intr; /* submit command request */ ide_raw_taskfile(drive, &args, NULL); /* if OK, compute maximum address value */ - if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) { - addr = ((args.tfRegister[IDE_SELECT_OFFSET] & 0x0f) << 24) - | ((args.tfRegister[ IDE_HCYL_OFFSET] ) << 16) - | ((args.tfRegister[ IDE_LCYL_OFFSET] ) << 8) - | ((args.tfRegister[IDE_SECTOR_OFFSET] )); + if ((tf->status & 0x01) == 0) { + addr = ((tf->device & 0xf) << 24) | + (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal; addr++; /* since the return value is (maxlba - 1), we add 1 */ } return addr; @@ -335,26 +334,24 @@ static unsigned long idedisk_read_native_max_address(ide_drive_t *drive) static unsigned long long idedisk_read_native_max_address_ext(ide_drive_t *drive) { ide_task_t args; + struct ide_taskfile *tf = &args.tf; unsigned long long addr = 0; /* Create IDE/ATA command request structure */ memset(&args, 0, sizeof(ide_task_t)); - - args.tfRegister[IDE_SELECT_OFFSET] = 0x40; - args.tfRegister[IDE_COMMAND_OFFSET] = WIN_READ_NATIVE_MAX_EXT; + tf->device = ATA_LBA; + tf->command = WIN_READ_NATIVE_MAX_EXT; args.command_type = IDE_DRIVE_TASK_NO_DATA; args.handler = &task_no_data_intr; /* submit command request */ ide_raw_taskfile(drive, &args, NULL); /* if OK, compute maximum address value */ - if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) { - u32 high = (args.hobRegister[IDE_HCYL_OFFSET] << 16) | - (args.hobRegister[IDE_LCYL_OFFSET] << 8) | - args.hobRegister[IDE_SECTOR_OFFSET]; - u32 low = ((args.tfRegister[IDE_HCYL_OFFSET])<<16) | - ((args.tfRegister[IDE_LCYL_OFFSET])<<8) | - (args.tfRegister[IDE_SECTOR_OFFSET]); + if ((tf->status & 0x01) == 0) { + u32 high, low; + + high = (tf->hob_lbah << 16) | (tf->hob_lbam << 8) | tf->hob_lbal; + low = (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal; addr = ((__u64)high << 24) | low; addr++; /* since the return value is (maxlba - 1), we add 1 */ } @@ -368,26 +365,25 @@ static unsigned long long idedisk_read_native_max_address_ext(ide_drive_t *drive static unsigned long idedisk_set_max_address(ide_drive_t *drive, unsigned long addr_req) { ide_task_t args; + struct ide_taskfile *tf = &args.tf; unsigned long addr_set = 0; addr_req--; /* Create IDE/ATA command request structure */ memset(&args, 0, sizeof(ide_task_t)); - args.tfRegister[IDE_SECTOR_OFFSET] = ((addr_req >> 0) & 0xff); - args.tfRegister[IDE_LCYL_OFFSET] = ((addr_req >> 8) & 0xff); - args.tfRegister[IDE_HCYL_OFFSET] = ((addr_req >> 16) & 0xff); - args.tfRegister[IDE_SELECT_OFFSET] = ((addr_req >> 24) & 0x0f) | 0x40; - args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SET_MAX; + tf->lbal = (addr_req >> 0) & 0xff; + tf->lbam = (addr_req >> 8) & 0xff; + tf->lbah = (addr_req >> 16) & 0xff; + tf->device = ((addr_req >> 24) & 0x0f) | ATA_LBA; + tf->command = WIN_SET_MAX; args.command_type = IDE_DRIVE_TASK_NO_DATA; args.handler = &task_no_data_intr; /* submit command request */ ide_raw_taskfile(drive, &args, NULL); /* if OK, read new maximum address value */ - if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) { - addr_set = ((args.tfRegister[IDE_SELECT_OFFSET] & 0x0f) << 24) - | ((args.tfRegister[ IDE_HCYL_OFFSET] ) << 16) - | ((args.tfRegister[ IDE_LCYL_OFFSET] ) << 8) - | ((args.tfRegister[IDE_SECTOR_OFFSET] )); + if ((tf->status & 0x01) == 0) { + addr_set = ((tf->device & 0xf) << 24) | + (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal; addr_set++; } return addr_set; @@ -396,33 +392,30 @@ static unsigned long idedisk_set_max_address(ide_drive_t *drive, unsigned long a static unsigned long long idedisk_set_max_address_ext(ide_drive_t *drive, unsigned long long addr_req) { ide_task_t args; + struct ide_taskfile *tf = &args.tf; unsigned long long addr_set = 0; addr_req--; /* Create IDE/ATA command request structure */ memset(&args, 0, sizeof(ide_task_t)); - args.tfRegister[IDE_SECTOR_OFFSET] = ((addr_req >> 0) & 0xff); - args.tfRegister[IDE_LCYL_OFFSET] = ((addr_req >>= 8) & 0xff); - args.tfRegister[IDE_HCYL_OFFSET] = ((addr_req >>= 8) & 0xff); - args.tfRegister[IDE_SELECT_OFFSET] = 0x40; - args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SET_MAX_EXT; - args.hobRegister[IDE_SECTOR_OFFSET] = (addr_req >>= 8) & 0xff; - args.hobRegister[IDE_LCYL_OFFSET] = (addr_req >>= 8) & 0xff; - args.hobRegister[IDE_HCYL_OFFSET] = (addr_req >>= 8) & 0xff; - args.hobRegister[IDE_SELECT_OFFSET] = 0x40; - args.hobRegister[IDE_CONTROL_OFFSET_HOB]= (drive->ctl|0x80); + tf->lbal = (addr_req >> 0) & 0xff; + tf->lbam = (addr_req >>= 8) & 0xff; + tf->lbah = (addr_req >>= 8) & 0xff; + tf->device = ATA_LBA; + tf->command = WIN_SET_MAX_EXT; + tf->hob_lbal = (addr_req >>= 8) & 0xff; + tf->hob_lbam = (addr_req >>= 8) & 0xff; + tf->hob_lbah = (addr_req >>= 8) & 0xff; args.command_type = IDE_DRIVE_TASK_NO_DATA; args.handler = &task_no_data_intr; /* submit command request */ ide_raw_taskfile(drive, &args, NULL); /* if OK, compute maximum address value */ - if ((args.tfRegister[IDE_STATUS_OFFSET] & 0x01) == 0) { - u32 high = (args.hobRegister[IDE_HCYL_OFFSET] << 16) | - (args.hobRegister[IDE_LCYL_OFFSET] << 8) | - args.hobRegister[IDE_SECTOR_OFFSET]; - u32 low = ((args.tfRegister[IDE_HCYL_OFFSET])<<16) | - ((args.tfRegister[IDE_LCYL_OFFSET])<<8) | - (args.tfRegister[IDE_SECTOR_OFFSET]); + if ((tf->status & 0x01) == 0) { + u32 high, low; + + high = (tf->hob_lbah << 16) | (tf->hob_lbam << 8) | tf->hob_lbal; + low = (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal; addr_set = ((__u64)high << 24) | low; addr_set++; } @@ -556,12 +549,13 @@ static sector_t idedisk_capacity (ide_drive_t *drive) static int smart_enable(ide_drive_t *drive) { ide_task_t args; + struct ide_taskfile *tf = &args.tf; memset(&args, 0, sizeof(ide_task_t)); - args.tfRegister[IDE_FEATURE_OFFSET] = SMART_ENABLE; - args.tfRegister[IDE_LCYL_OFFSET] = SMART_LCYL_PASS; - args.tfRegister[IDE_HCYL_OFFSET] = SMART_HCYL_PASS; - args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SMART; + tf->feature = SMART_ENABLE; + tf->lbam = SMART_LCYL_PASS; + tf->lbah = SMART_HCYL_PASS; + tf->command = WIN_SMART; args.command_type = IDE_DRIVE_TASK_NO_DATA; args.handler = &task_no_data_intr; return ide_raw_taskfile(drive, &args, NULL); @@ -570,13 +564,14 @@ static int smart_enable(ide_drive_t *drive) static int get_smart_data(ide_drive_t *drive, u8 *buf, u8 sub_cmd) { ide_task_t args; + struct ide_taskfile *tf = &args.tf; memset(&args, 0, sizeof(ide_task_t)); - args.tfRegister[IDE_FEATURE_OFFSET] = sub_cmd; - args.tfRegister[IDE_NSECTOR_OFFSET] = 0x01; - args.tfRegister[IDE_LCYL_OFFSET] = SMART_LCYL_PASS; - args.tfRegister[IDE_HCYL_OFFSET] = SMART_HCYL_PASS; - args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SMART; + tf->feature = sub_cmd; + tf->nsect = 0x01; + tf->lbam = SMART_LCYL_PASS; + tf->lbah = SMART_HCYL_PASS; + tf->command = WIN_SMART; args.command_type = IDE_DRIVE_TASK_IN; args.data_phase = TASKFILE_IN; args.handler = &task_in_intr; @@ -753,9 +748,9 @@ static int write_cache(ide_drive_t *drive, int arg) if (ide_id_has_flush_cache(drive->id)) { memset(&args, 0, sizeof(ide_task_t)); - args.tfRegister[IDE_FEATURE_OFFSET] = (arg) ? + args.tf.feature = arg ? SETFEATURES_EN_WCACHE : SETFEATURES_DIS_WCACHE; - args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SETFEATURES; + args.tf.command = WIN_SETFEATURES; args.command_type = IDE_DRIVE_TASK_NO_DATA; args.handler = &task_no_data_intr; err = ide_raw_taskfile(drive, &args, NULL); @@ -774,9 +769,9 @@ static int do_idedisk_flushcache (ide_drive_t *drive) memset(&args, 0, sizeof(ide_task_t)); if (ide_id_has_flush_cache_ext(drive->id)) - args.tfRegister[IDE_COMMAND_OFFSET] = WIN_FLUSH_CACHE_EXT; + args.tf.command = WIN_FLUSH_CACHE_EXT; else - args.tfRegister[IDE_COMMAND_OFFSET] = WIN_FLUSH_CACHE; + args.tf.command = WIN_FLUSH_CACHE; args.command_type = IDE_DRIVE_TASK_NO_DATA; args.handler = &task_no_data_intr; return ide_raw_taskfile(drive, &args, NULL); @@ -790,10 +785,9 @@ static int set_acoustic (ide_drive_t *drive, int arg) return -EINVAL; memset(&args, 0, sizeof(ide_task_t)); - args.tfRegister[IDE_FEATURE_OFFSET] = (arg) ? SETFEATURES_EN_AAM : - SETFEATURES_DIS_AAM; - args.tfRegister[IDE_NSECTOR_OFFSET] = arg; - args.tfRegister[IDE_COMMAND_OFFSET] = WIN_SETFEATURES; + args.tf.feature = arg ? SETFEATURES_EN_AAM : SETFEATURES_DIS_AAM; + args.tf.nsect = arg; + args.tf.command = WIN_SETFEATURES; args.command_type = IDE_DRIVE_TASK_NO_DATA; args.handler = &task_no_data_intr; ide_raw_taskfile(drive, &args, NULL); @@ -1057,7 +1051,7 @@ static int idedisk_open(struct inode *inode, struct file *filp) if (drive->removable && idkp->openers == 1) { ide_task_t args; memset(&args, 0, sizeof(ide_task_t)); - args.tfRegister[IDE_COMMAND_OFFSET] = WIN_DOORLOCK; + args.tf.command = WIN_DOORLOCK; args.command_type = IDE_DRIVE_TASK_NO_DATA; args.handler = &task_no_data_intr; check_disk_change(inode->i_bdev); @@ -1084,7 +1078,7 @@ static int idedisk_release(struct inode *inode, struct file *filp) if (drive->removable && idkp->openers == 1) { ide_task_t args; memset(&args, 0, sizeof(ide_task_t)); - args.tfRegister[IDE_COMMAND_OFFSET] = WIN_DOORUNLOCK; + args.tf.command = WIN_DOORUNLOCK; args.command_type = IDE_DRIVE_TASK_NO_DATA; args.handler = &task_no_data_intr; if (drive->doorlocking && ide_raw_taskfile(drive, &args, NULL)) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index bb1b0a884cfc..dc984c5b0d13 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -189,15 +189,15 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * return ide_stopped; } if (ide_id_has_flush_cache_ext(drive->id)) - args->tfRegister[IDE_COMMAND_OFFSET] = WIN_FLUSH_CACHE_EXT; + args->tf.command = WIN_FLUSH_CACHE_EXT; else - args->tfRegister[IDE_COMMAND_OFFSET] = WIN_FLUSH_CACHE; + args->tf.command = WIN_FLUSH_CACHE; args->command_type = IDE_DRIVE_TASK_NO_DATA; args->handler = &task_no_data_intr; return do_rw_taskfile(drive, args); case idedisk_pm_standby: /* Suspend step 2 (standby) */ - args->tfRegister[IDE_COMMAND_OFFSET] = WIN_STANDBYNOW1; + args->tf.command = WIN_STANDBYNOW1; args->command_type = IDE_DRIVE_TASK_NO_DATA; args->handler = &task_no_data_intr; return do_rw_taskfile(drive, args); @@ -214,7 +214,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * return ide_stopped; case idedisk_pm_idle: /* Resume step 2 (idle) */ - args->tfRegister[IDE_COMMAND_OFFSET] = WIN_IDLEIMMEDIATE; + args->tf.command = WIN_IDLEIMMEDIATE; args->command_type = IDE_DRIVE_TASK_NO_DATA; args->handler = task_no_data_intr; return do_rw_taskfile(drive, args); @@ -354,28 +354,31 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err) rq->errors = !OK_STAT(stat,READY_STAT,BAD_STAT); if (args) { + struct ide_taskfile *tf = &args->tf; + if (args->tf_in_flags.b.data) { - u16 data = hwif->INW(IDE_DATA_REG); - args->tfRegister[IDE_DATA_OFFSET] = (data) & 0xFF; - args->hobRegister[IDE_DATA_OFFSET] = (data >> 8) & 0xFF; + u16 data = hwif->INW(IDE_DATA_REG); + + tf->data = data & 0xff; + tf->hob_data = (data >> 8) & 0xff; } - args->tfRegister[IDE_ERROR_OFFSET] = err; + tf->error = err; /* be sure we're looking at the low order bits */ hwif->OUTB(drive->ctl & ~0x80, IDE_CONTROL_REG); - args->tfRegister[IDE_NSECTOR_OFFSET] = hwif->INB(IDE_NSECTOR_REG); - args->tfRegister[IDE_SECTOR_OFFSET] = hwif->INB(IDE_SECTOR_REG); - args->tfRegister[IDE_LCYL_OFFSET] = hwif->INB(IDE_LCYL_REG); - args->tfRegister[IDE_HCYL_OFFSET] = hwif->INB(IDE_HCYL_REG); - args->tfRegister[IDE_SELECT_OFFSET] = hwif->INB(IDE_SELECT_REG); - args->tfRegister[IDE_STATUS_OFFSET] = stat; + tf->nsect = hwif->INB(IDE_NSECTOR_REG); + tf->lbal = hwif->INB(IDE_SECTOR_REG); + tf->lbam = hwif->INB(IDE_LCYL_REG); + tf->lbah = hwif->INB(IDE_HCYL_REG); + tf->device = hwif->INB(IDE_SELECT_REG); + tf->status = stat; if (drive->addressing == 1) { hwif->OUTB(drive->ctl|0x80, IDE_CONTROL_REG); - args->hobRegister[IDE_FEATURE_OFFSET] = hwif->INB(IDE_FEATURE_REG); - args->hobRegister[IDE_NSECTOR_OFFSET] = hwif->INB(IDE_NSECTOR_REG); - args->hobRegister[IDE_SECTOR_OFFSET] = hwif->INB(IDE_SECTOR_REG); - args->hobRegister[IDE_LCYL_OFFSET] = hwif->INB(IDE_LCYL_REG); - args->hobRegister[IDE_HCYL_OFFSET] = hwif->INB(IDE_HCYL_REG); + tf->hob_feature = hwif->INB(IDE_FEATURE_REG); + tf->hob_nsect = hwif->INB(IDE_NSECTOR_REG); + tf->hob_lbal = hwif->INB(IDE_SECTOR_REG); + tf->hob_lbam = hwif->INB(IDE_LCYL_REG); + tf->hob_lbah = hwif->INB(IDE_HCYL_REG); } } } else if (blk_pm_request(rq)) { @@ -675,28 +678,28 @@ static ide_startstop_t drive_cmd_intr (ide_drive_t *drive) static void ide_init_specify_cmd(ide_drive_t *drive, ide_task_t *task) { - task->tfRegister[IDE_NSECTOR_OFFSET] = drive->sect; - task->tfRegister[IDE_SECTOR_OFFSET] = drive->sect; - task->tfRegister[IDE_LCYL_OFFSET] = drive->cyl; - task->tfRegister[IDE_HCYL_OFFSET] = drive->cyl>>8; - task->tfRegister[IDE_SELECT_OFFSET] = ((drive->head-1)|drive->select.all)&0xBF; - task->tfRegister[IDE_COMMAND_OFFSET] = WIN_SPECIFY; + task->tf.nsect = drive->sect; + task->tf.lbal = drive->sect; + task->tf.lbam = drive->cyl; + task->tf.lbah = drive->cyl >> 8; + task->tf.device = ((drive->head - 1) | drive->select.all) & ~ATA_LBA; + task->tf.command = WIN_SPECIFY; task->handler = &set_geometry_intr; } static void ide_init_restore_cmd(ide_drive_t *drive, ide_task_t *task) { - task->tfRegister[IDE_NSECTOR_OFFSET] = drive->sect; - task->tfRegister[IDE_COMMAND_OFFSET] = WIN_RESTORE; + task->tf.nsect = drive->sect; + task->tf.command = WIN_RESTORE; task->handler = &recal_intr; } static void ide_init_setmult_cmd(ide_drive_t *drive, ide_task_t *task) { - task->tfRegister[IDE_NSECTOR_OFFSET] = drive->mult_req; - task->tfRegister[IDE_COMMAND_OFFSET] = WIN_SETMULT; + task->tf.nsect = drive->mult_req; + task->tf.command = WIN_SETMULT; task->handler = &set_multmode_intr; } diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index f4e8a0cf06e2..4aac1cc7101d 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -642,9 +642,9 @@ no_80w: int ide_ata66_check (ide_drive_t *drive, ide_task_t *args) { - if ((args->tfRegister[IDE_COMMAND_OFFSET] == WIN_SETFEATURES) && - (args->tfRegister[IDE_SECTOR_OFFSET] > XFER_UDMA_2) && - (args->tfRegister[IDE_FEATURE_OFFSET] == SETFEATURES_XFER)) { + if (args->tf.command == WIN_SETFEATURES && + args->tf.lbal > XFER_UDMA_2 && + args->tf.feature == SETFEATURES_XFER) { if (eighty_ninty_three(drive) == 0) { printk(KERN_WARNING "%s: UDMA speeds >UDMA33 cannot " "be set\n", drive->name); @@ -662,9 +662,9 @@ int ide_ata66_check (ide_drive_t *drive, ide_task_t *args) */ int set_transfer (ide_drive_t *drive, ide_task_t *args) { - if ((args->tfRegister[IDE_COMMAND_OFFSET] == WIN_SETFEATURES) && - (args->tfRegister[IDE_SECTOR_OFFSET] >= XFER_SW_DMA_0) && - (args->tfRegister[IDE_FEATURE_OFFSET] == SETFEATURES_XFER) && + if (args->tf.command == WIN_SETFEATURES && + args->tf.lbal >= XFER_SW_DMA_0 && + args->tf.feature == SETFEATURES_XFER && (drive->id->dma_ultra || drive->id->dma_mword || drive->id->dma_1word)) diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 062d3bcb2471..6dbf2af0d215 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -468,8 +468,7 @@ static void ide_dump_opcode(ide_drive_t *drive) } else if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { ide_task_t *args = rq->special; if (args) { - task_struct_t *tf = (task_struct_t *) args->tfRegister; - opcode = tf->command; + opcode = args->tf.command; found = 1; } } diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 91948a46cc6e..5a1a9f7846b6 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -66,12 +66,13 @@ static void taskfile_output_data(ide_drive_t *drive, void *buffer, u32 wcount) int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf) { ide_task_t args; + memset(&args, 0, sizeof(ide_task_t)); - args.tfRegister[IDE_NSECTOR_OFFSET] = 0x01; + args.tf.nsect = 0x01; if (drive->media == ide_disk) - args.tfRegister[IDE_COMMAND_OFFSET] = WIN_IDENTIFY; + args.tf.command = WIN_IDENTIFY; else - args.tfRegister[IDE_COMMAND_OFFSET] = WIN_PIDENTIFY; + args.tf.command = WIN_PIDENTIFY; args.command_type = IDE_DRIVE_TASK_IN; args.data_phase = TASKFILE_IN; args.handler = &task_in_intr; @@ -81,8 +82,7 @@ int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf) ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) { ide_hwif_t *hwif = HWIF(drive); - task_struct_t *taskfile = (task_struct_t *) task->tfRegister; - hob_struct_t *hobfile = (hob_struct_t *) task->hobRegister; + struct ide_taskfile *tf = &task->tf; u8 HIHI = (drive->addressing == 1) ? 0xE0 : 0xEF; /* ALL Command Block Executions SHALL clear nIEN, unless otherwise */ @@ -93,35 +93,35 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) SELECT_MASK(drive, 0); if (drive->addressing == 1) { - hwif->OUTB(hobfile->feature, IDE_FEATURE_REG); - hwif->OUTB(hobfile->sector_count, IDE_NSECTOR_REG); - hwif->OUTB(hobfile->sector_number, IDE_SECTOR_REG); - hwif->OUTB(hobfile->low_cylinder, IDE_LCYL_REG); - hwif->OUTB(hobfile->high_cylinder, IDE_HCYL_REG); + hwif->OUTB(tf->hob_feature, IDE_FEATURE_REG); + hwif->OUTB(tf->hob_nsect, IDE_NSECTOR_REG); + hwif->OUTB(tf->hob_lbal, IDE_SECTOR_REG); + hwif->OUTB(tf->hob_lbam, IDE_LCYL_REG); + hwif->OUTB(tf->hob_lbah, IDE_HCYL_REG); } - hwif->OUTB(taskfile->feature, IDE_FEATURE_REG); - hwif->OUTB(taskfile->sector_count, IDE_NSECTOR_REG); - hwif->OUTB(taskfile->sector_number, IDE_SECTOR_REG); - hwif->OUTB(taskfile->low_cylinder, IDE_LCYL_REG); - hwif->OUTB(taskfile->high_cylinder, IDE_HCYL_REG); + hwif->OUTB(tf->feature, IDE_FEATURE_REG); + hwif->OUTB(tf->nsect, IDE_NSECTOR_REG); + hwif->OUTB(tf->lbal, IDE_SECTOR_REG); + hwif->OUTB(tf->lbam, IDE_LCYL_REG); + hwif->OUTB(tf->lbah, IDE_HCYL_REG); - hwif->OUTB((taskfile->device_head & HIHI) | drive->select.all, IDE_SELECT_REG); + hwif->OUTB((tf->device & HIHI) | drive->select.all, IDE_SELECT_REG); if (task->handler != NULL) { if (task->prehandler != NULL) { - hwif->OUTBSYNC(drive, taskfile->command, IDE_COMMAND_REG); + hwif->OUTBSYNC(drive, tf->command, IDE_COMMAND_REG); ndelay(400); /* FIXME */ return task->prehandler(drive, task->rq); } - ide_execute_command(drive, taskfile->command, task->handler, WAIT_WORSTCASE, NULL); + ide_execute_command(drive, tf->command, task->handler, WAIT_WORSTCASE, NULL); return ide_started; } if (!drive->using_dma) return ide_stopped; - switch (taskfile->command) { + switch (tf->command) { case WIN_WRITEDMA_ONCE: case WIN_WRITEDMA: case WIN_WRITEDMA_EXT: @@ -130,7 +130,7 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) case WIN_READDMA_EXT: case WIN_IDENTIFY_DMA: if (!hwif->dma_setup(drive)) { - hwif->dma_exec_cmd(drive, taskfile->command); + hwif->dma_exec_cmd(drive, tf->command); hwif->dma_start(drive); return ide_started; } @@ -483,7 +483,7 @@ static int ide_diag_taskfile(ide_drive_t *drive, ide_task_t *args, unsigned long */ if (args->command_type != IDE_DRIVE_TASK_NO_DATA) { if (data_size == 0) - rq.nr_sectors = (args->hobRegister[IDE_NSECTOR_OFFSET] << 8) | args->tfRegister[IDE_NSECTOR_OFFSET]; + rq.nr_sectors = (args->tf.hob_nsect << 8) | args->tf.nsect; else rq.nr_sectors = data_size / SECTOR_SIZE; @@ -519,8 +519,6 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) ide_task_t args; u8 *outbuf = NULL; u8 *inbuf = NULL; - u8 *argsptr = args.tfRegister; - u8 *hobsptr = args.hobRegister; int err = 0; int tasksize = sizeof(struct ide_task_request_s); unsigned int taskin = 0; @@ -572,9 +570,9 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) } memset(&args, 0, sizeof(ide_task_t)); - memcpy(argsptr, req_task->io_ports, HDIO_DRIVE_TASK_HDR_SIZE); - memcpy(hobsptr, req_task->hob_ports, HDIO_DRIVE_HOB_HDR_SIZE); + memcpy(&args.tf_array[0], req_task->hob_ports, HDIO_DRIVE_HOB_HDR_SIZE - 2); + memcpy(&args.tf_array[6], req_task->io_ports, HDIO_DRIVE_TASK_HDR_SIZE); args.tf_in_flags = req_task->in_flags; args.tf_out_flags = req_task->out_flags; args.data_phase = req_task->data_phase; @@ -628,8 +626,8 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) goto abort; } - memcpy(req_task->io_ports, &(args.tfRegister), HDIO_DRIVE_TASK_HDR_SIZE); - memcpy(req_task->hob_ports, &(args.hobRegister), HDIO_DRIVE_HOB_HDR_SIZE); + memcpy(req_task->hob_ports, &args.tf_array[0], HDIO_DRIVE_HOB_HDR_SIZE - 2); + memcpy(req_task->io_ports, &args.tf_array[6], HDIO_DRIVE_TASK_HDR_SIZE); req_task->in_flags = args.tf_in_flags; req_task->out_flags = args.tf_out_flags; @@ -688,6 +686,7 @@ int ide_cmd_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) u8 xfer_rate = 0; int argsize = 4; ide_task_t tfargs; + struct ide_taskfile *tf = &tfargs.tf; if (NULL == (void *) arg) { struct request rq; @@ -699,13 +698,10 @@ int ide_cmd_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) return -EFAULT; memset(&tfargs, 0, sizeof(ide_task_t)); - tfargs.tfRegister[IDE_FEATURE_OFFSET] = args[2]; - tfargs.tfRegister[IDE_NSECTOR_OFFSET] = args[3]; - tfargs.tfRegister[IDE_SECTOR_OFFSET] = args[1]; - tfargs.tfRegister[IDE_LCYL_OFFSET] = 0x00; - tfargs.tfRegister[IDE_HCYL_OFFSET] = 0x00; - tfargs.tfRegister[IDE_SELECT_OFFSET] = 0x00; - tfargs.tfRegister[IDE_COMMAND_OFFSET] = args[0]; + tf->feature = args[2]; + tf->nsect = args[3]; + tf->lbal = args[1]; + tf->command = args[0]; if (args[3]) { argsize = 4 + (SECTOR_WORDS * 4 * args[3]); @@ -767,8 +763,7 @@ int ide_task_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) ide_startstop_t flagged_taskfile (ide_drive_t *drive, ide_task_t *task) { ide_hwif_t *hwif = HWIF(drive); - task_struct_t *taskfile = (task_struct_t *) task->tfRegister; - hob_struct_t *hobfile = (hob_struct_t *) task->hobRegister; + struct ide_taskfile *tf = &task->tf; if (task->data_phase == TASKFILE_MULTI_IN || task->data_phase == TASKFILE_MULTI_OUT) { @@ -798,34 +793,32 @@ ide_startstop_t flagged_taskfile (ide_drive_t *drive, ide_task_t *task) hwif->OUTB(drive->ctl, IDE_CONTROL_REG); SELECT_MASK(drive, 0); - if (task->tf_out_flags.b.data) { - u16 data = taskfile->data + (hobfile->data << 8); - hwif->OUTW(data, IDE_DATA_REG); - } + if (task->tf_out_flags.b.data) + hwif->OUTW((tf->hob_data << 8) | tf->data, IDE_DATA_REG); /* (ks) send hob registers first */ if (task->tf_out_flags.b.nsector_hob) - hwif->OUTB(hobfile->sector_count, IDE_NSECTOR_REG); + hwif->OUTB(tf->hob_nsect, IDE_NSECTOR_REG); if (task->tf_out_flags.b.sector_hob) - hwif->OUTB(hobfile->sector_number, IDE_SECTOR_REG); + hwif->OUTB(tf->hob_lbal, IDE_SECTOR_REG); if (task->tf_out_flags.b.lcyl_hob) - hwif->OUTB(hobfile->low_cylinder, IDE_LCYL_REG); + hwif->OUTB(tf->hob_lbam, IDE_LCYL_REG); if (task->tf_out_flags.b.hcyl_hob) - hwif->OUTB(hobfile->high_cylinder, IDE_HCYL_REG); + hwif->OUTB(tf->hob_lbah, IDE_HCYL_REG); /* (ks) Send now the standard registers */ if (task->tf_out_flags.b.error_feature) - hwif->OUTB(taskfile->feature, IDE_FEATURE_REG); + hwif->OUTB(tf->feature, IDE_FEATURE_REG); /* refers to number of sectors to transfer */ if (task->tf_out_flags.b.nsector) - hwif->OUTB(taskfile->sector_count, IDE_NSECTOR_REG); + hwif->OUTB(tf->nsect, IDE_NSECTOR_REG); /* refers to sector offset or start sector */ if (task->tf_out_flags.b.sector) - hwif->OUTB(taskfile->sector_number, IDE_SECTOR_REG); + hwif->OUTB(tf->lbal, IDE_SECTOR_REG); if (task->tf_out_flags.b.lcyl) - hwif->OUTB(taskfile->low_cylinder, IDE_LCYL_REG); + hwif->OUTB(tf->lbam, IDE_LCYL_REG); if (task->tf_out_flags.b.hcyl) - hwif->OUTB(taskfile->high_cylinder, IDE_HCYL_REG); + hwif->OUTB(tf->lbah, IDE_HCYL_REG); /* * (ks) In the flagged taskfile approch, we will use all specified @@ -833,7 +826,7 @@ ide_startstop_t flagged_taskfile (ide_drive_t *drive, ide_task_t *task) * select bit (master/slave) in the drive_head register. We must make * sure that the desired drive is selected. */ - hwif->OUTB(taskfile->device_head | drive->select.all, IDE_SELECT_REG); + hwif->OUTB(tf->device | drive->select.all, IDE_SELECT_REG); switch(task->data_phase) { case TASKFILE_OUT_DMAQ: @@ -844,7 +837,7 @@ ide_startstop_t flagged_taskfile (ide_drive_t *drive, ide_task_t *task) break; if (!hwif->dma_setup(drive)) { - hwif->dma_exec_cmd(drive, taskfile->command); + hwif->dma_exec_cmd(drive, tf->command); hwif->dma_start(drive); return ide_started; } @@ -856,11 +849,11 @@ ide_startstop_t flagged_taskfile (ide_drive_t *drive, ide_task_t *task) /* Issue the command */ if (task->prehandler) { - hwif->OUTBSYNC(drive, taskfile->command, IDE_COMMAND_REG); + hwif->OUTBSYNC(drive, tf->command, IDE_COMMAND_REG); ndelay(400); /* FIXME */ return task->prehandler(drive, task->rq); } - ide_execute_command(drive, taskfile->command, task->handler, WAIT_WORSTCASE, NULL); + ide_execute_command(drive, tf->command, task->handler, WAIT_WORSTCASE, NULL); return ide_started; } diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h index 3bcb88560418..df17bf767d98 100644 --- a/include/linux/hdreg.h +++ b/include/linux/hdreg.h @@ -117,7 +117,7 @@ typedef union ide_reg_valid_s { typedef struct ide_task_request_s { __u8 io_ports[8]; - __u8 hob_ports[8]; + __u8 hob_ports[8]; /* bytes 6 and 7 are unused */ ide_reg_valid_t out_flags; ide_reg_valid_t in_flags; int data_phase; @@ -139,6 +139,7 @@ struct hd_drive_cmd_hdr { __u8 sector_count; }; +#ifndef __KERNEL__ typedef struct hd_drive_task_hdr { __u8 data; __u8 feature; @@ -160,6 +161,7 @@ typedef struct hd_drive_hob_hdr { __u8 device_head; __u8 control; } hob_struct_t; +#endif #define TASKFILE_INVALID 0x7fff #define TASKFILE_48 0x8000 diff --git a/include/linux/ide.h b/include/linux/ide.h index 66a38f101175..69b78bb39caf 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -103,8 +103,6 @@ typedef unsigned char byte; /* used everywhere */ #define IDE_FEATURE_OFFSET IDE_ERROR_OFFSET #define IDE_COMMAND_OFFSET IDE_STATUS_OFFSET -#define IDE_CONTROL_OFFSET_HOB (7) - #define IDE_DATA_REG (HWIF(drive)->io_ports[IDE_DATA_OFFSET]) #define IDE_ERROR_REG (HWIF(drive)->io_ports[IDE_ERROR_OFFSET]) #define IDE_NSECTOR_REG (HWIF(drive)->io_ports[IDE_NSECTOR_OFFSET]) @@ -1062,15 +1060,40 @@ extern void ide_end_drive_cmd(ide_drive_t *, u8, u8); */ extern int ide_wait_cmd(ide_drive_t *, u8, u8, u8, u8, u8 *); +struct ide_taskfile { + u8 hob_data; /* 0: high data byte (for TASKFILE IOCTL) */ + + u8 hob_feature; /* 1-5: additional data to support LBA48 */ + u8 hob_nsect; + u8 hob_lbal; + u8 hob_lbam; + u8 hob_lbah; + + u8 data; /* 6: low data byte (for TASKFILE IOCTL) */ + + union { /*  7: */ + u8 error; /* read: error */ + u8 feature; /* write: feature */ + }; + + u8 nsect; /* 8: number of sectors */ + u8 lbal; /* 9: LBA low */ + u8 lbam; /* 10: LBA mid */ + u8 lbah; /* 11: LBA high */ + + u8 device; /* 12: device select */ + + union { /* 13: */ + u8 status; /*  read: status  */ + u8 command; /* write: command */ + }; +}; + typedef struct ide_task_s { -/* - * struct hd_drive_task_hdr tf; - * task_struct_t tf; - * struct hd_drive_hob_hdr hobf; - * hob_struct_t hobf; - */ - u8 tfRegister[8]; - u8 hobRegister[8]; + union { + struct ide_taskfile tf; + u8 tf_array[14]; + }; ide_reg_valid_t tf_out_flags; ide_reg_valid_t tf_in_flags; int data_phase; -- cgit v1.2.3-59-g8ed1b From 7a3b7512d0d7e78353e99f4538eb6d3354019d92 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:06 +0100 Subject: ide-disk: merge LBA28 and LBA48 Host Protected Area support code (take 2) * Merge idedisk_{read_native,set}_max_address_ext() into idedisk_{read_native,set}_max_address(). v2: * Remove LBA48 code leftover from idedisk_read_native_max_address() ('high' variable initialization). (Noticed by Sergei). There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 103 +++++++++++++++---------------------------------- 1 file changed, 32 insertions(+), 71 deletions(-) diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index a4c4d4350560..88c270fad684 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -307,50 +307,33 @@ static ide_startstop_t ide_do_rw_disk (ide_drive_t *drive, struct request *rq, s * Queries for true maximum capacity of the drive. * Returns maximum LBA address (> 0) of the drive, 0 if failed. */ -static unsigned long idedisk_read_native_max_address(ide_drive_t *drive) +static u64 idedisk_read_native_max_address(ide_drive_t *drive, int lba48) { ide_task_t args; struct ide_taskfile *tf = &args.tf; - unsigned long addr = 0; + u64 addr = 0; /* Create IDE/ATA command request structure */ memset(&args, 0, sizeof(ide_task_t)); + if (lba48) + tf->command = WIN_READ_NATIVE_MAX_EXT; + else + tf->command = WIN_READ_NATIVE_MAX; tf->device = ATA_LBA; - tf->command = WIN_READ_NATIVE_MAX; args.command_type = IDE_DRIVE_TASK_NO_DATA; args.handler = &task_no_data_intr; /* submit command request */ ide_raw_taskfile(drive, &args, NULL); - /* if OK, compute maximum address value */ - if ((tf->status & 0x01) == 0) { - addr = ((tf->device & 0xf) << 24) | - (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal; - addr++; /* since the return value is (maxlba - 1), we add 1 */ - } - return addr; -} - -static unsigned long long idedisk_read_native_max_address_ext(ide_drive_t *drive) -{ - ide_task_t args; - struct ide_taskfile *tf = &args.tf; - unsigned long long addr = 0; - - /* Create IDE/ATA command request structure */ - memset(&args, 0, sizeof(ide_task_t)); - tf->device = ATA_LBA; - tf->command = WIN_READ_NATIVE_MAX_EXT; - args.command_type = IDE_DRIVE_TASK_NO_DATA; - args.handler = &task_no_data_intr; - /* submit command request */ - ide_raw_taskfile(drive, &args, NULL); - /* if OK, compute maximum address value */ if ((tf->status & 0x01) == 0) { u32 high, low; - high = (tf->hob_lbah << 16) | (tf->hob_lbam << 8) | tf->hob_lbal; + if (lba48) + high = (tf->hob_lbah << 16) | (tf->hob_lbam << 8) | + tf->hob_lbal; + else + high = tf->device & 0xf; low = (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal; addr = ((__u64)high << 24) | low; addr++; /* since the return value is (maxlba - 1), we add 1 */ @@ -362,38 +345,11 @@ static unsigned long long idedisk_read_native_max_address_ext(ide_drive_t *drive * Sets maximum virtual LBA address of the drive. * Returns new maximum virtual LBA address (> 0) or 0 on failure. */ -static unsigned long idedisk_set_max_address(ide_drive_t *drive, unsigned long addr_req) +static u64 idedisk_set_max_address(ide_drive_t *drive, u64 addr_req, int lba48) { ide_task_t args; struct ide_taskfile *tf = &args.tf; - unsigned long addr_set = 0; - - addr_req--; - /* Create IDE/ATA command request structure */ - memset(&args, 0, sizeof(ide_task_t)); - tf->lbal = (addr_req >> 0) & 0xff; - tf->lbam = (addr_req >> 8) & 0xff; - tf->lbah = (addr_req >> 16) & 0xff; - tf->device = ((addr_req >> 24) & 0x0f) | ATA_LBA; - tf->command = WIN_SET_MAX; - args.command_type = IDE_DRIVE_TASK_NO_DATA; - args.handler = &task_no_data_intr; - /* submit command request */ - ide_raw_taskfile(drive, &args, NULL); - /* if OK, read new maximum address value */ - if ((tf->status & 0x01) == 0) { - addr_set = ((tf->device & 0xf) << 24) | - (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal; - addr_set++; - } - return addr_set; -} - -static unsigned long long idedisk_set_max_address_ext(ide_drive_t *drive, unsigned long long addr_req) -{ - ide_task_t args; - struct ide_taskfile *tf = &args.tf; - unsigned long long addr_set = 0; + u64 addr_set = 0; addr_req--; /* Create IDE/ATA command request structure */ @@ -401,11 +357,16 @@ static unsigned long long idedisk_set_max_address_ext(ide_drive_t *drive, unsign tf->lbal = (addr_req >> 0) & 0xff; tf->lbam = (addr_req >>= 8) & 0xff; tf->lbah = (addr_req >>= 8) & 0xff; - tf->device = ATA_LBA; - tf->command = WIN_SET_MAX_EXT; - tf->hob_lbal = (addr_req >>= 8) & 0xff; - tf->hob_lbam = (addr_req >>= 8) & 0xff; - tf->hob_lbah = (addr_req >>= 8) & 0xff; + if (lba48) { + tf->hob_lbal = (addr_req >>= 8) & 0xff; + tf->hob_lbam = (addr_req >>= 8) & 0xff; + tf->hob_lbah = (addr_req >>= 8) & 0xff; + tf->command = WIN_SET_MAX_EXT; + } else { + tf->device = (addr_req >>= 8) & 0x0f; + tf->command = WIN_SET_MAX; + } + tf->device |= ATA_LBA; args.command_type = IDE_DRIVE_TASK_NO_DATA; args.handler = &task_no_data_intr; /* submit command request */ @@ -414,7 +375,11 @@ static unsigned long long idedisk_set_max_address_ext(ide_drive_t *drive, unsign if ((tf->status & 0x01) == 0) { u32 high, low; - high = (tf->hob_lbah << 16) | (tf->hob_lbam << 8) | tf->hob_lbal; + if (lba48) + high = (tf->hob_lbah << 16) | (tf->hob_lbam << 8) | + tf->hob_lbal; + else + high = tf->device & 0xf; low = (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal; addr_set = ((__u64)high << 24) | low; addr_set++; @@ -464,10 +429,8 @@ static void idedisk_check_hpa(ide_drive_t *drive) int lba48 = idedisk_supports_lba48(drive->id); capacity = drive->capacity64; - if (lba48) - set_max = idedisk_read_native_max_address_ext(drive); - else - set_max = idedisk_read_native_max_address(drive); + + set_max = idedisk_read_native_max_address(drive, lba48); if (ide_in_drive_list(drive->id, hpa_list)) { /* @@ -488,10 +451,8 @@ static void idedisk_check_hpa(ide_drive_t *drive) capacity, sectors_to_MB(capacity), set_max, sectors_to_MB(set_max)); - if (lba48) - set_max = idedisk_set_max_address_ext(drive, set_max); - else - set_max = idedisk_set_max_address(drive, set_max); + set_max = idedisk_set_max_address(drive, set_max, lba48); + if (set_max) { drive->capacity64 = set_max; printk(KERN_INFO "%s: Host Protected Area disabled.\n", -- cgit v1.2.3-59-g8ed1b From d00e42dd26bbda6a39aead6a47c59221e03a08f8 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:06 +0100 Subject: ide-disk: fix taskfile registers loading order in __ide_do_rw_disk() Load IDE_SECTOR_REG after IDE_FEATURE_REG and IDE_NSECTOR_REG when using CHS. This patch is basically a preparation for the next one which converts __ide_do_rw_disk() to use struct ide_taskfile. It shouldn't affect anything (just a usual paranoia to separate changes which change the way in which hardware is accessed from code cleanups). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 88c270fad684..9b63e15d67e2 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -212,7 +212,6 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, unsigned int sect,head,cyl,track; track = (int)block / drive->sect; sect = (int)block % drive->sect + 1; - hwif->OUTB(sect, IDE_SECTOR_REG); head = track % drive->head; cyl = track / drive->head; @@ -220,6 +219,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, hwif->OUTB(0x00, IDE_FEATURE_REG); hwif->OUTB(nsectors.b.low, IDE_NSECTOR_REG); + hwif->OUTB(sect, IDE_SECTOR_REG); hwif->OUTB(cyl, IDE_LCYL_REG); hwif->OUTB(cyl>>8, IDE_HCYL_REG); hwif->OUTB(head|drive->select.all,IDE_SELECT_REG); -- cgit v1.2.3-59-g8ed1b From 2bd06b23e2a099abbf550202f62cd433e01f83e7 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:06 +0100 Subject: ide-disk: use struct ide_taskfile in __ide_do_rw_disk() Based on the earlier work by Tejun Heo. There should be no functionality changes caused by this patch. Cc: Tejun Heo Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 85 +++++++++++++++++++++++++------------------------- 1 file changed, 42 insertions(+), 43 deletions(-) diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 9b63e15d67e2..20d357e9329d 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -140,6 +140,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, u8 lba48 = (drive->addressing == 1) ? 1 : 0; u8 command = WIN_NOP; ata_nsector_t nsectors; + struct ide_taskfile ltf, *tf = <f; nsectors.all = (u16) rq->nr_sectors; @@ -160,53 +161,36 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, /* FIXME: SELECT_MASK(drive, 0) ? */ + memset(tf, 0, sizeof(*tf)); + if (drive->select.b.lba) { if (lba48) { - u8 tasklets[10]; - pr_debug("%s: LBA=0x%012llx\n", drive->name, (unsigned long long)block); - tasklets[0] = 0; - tasklets[1] = 0; - tasklets[2] = nsectors.b.low; - tasklets[3] = nsectors.b.high; - tasklets[4] = (u8) block; - tasklets[5] = (u8)(block >> 8); - tasklets[6] = (u8)(block >> 16); - tasklets[7] = (u8)(block >> 24); - if (sizeof(block) == 4) { - tasklets[8] = 0; - tasklets[9] = 0; - } else { - tasklets[8] = (u8)((u64)block >> 32); - tasklets[9] = (u8)((u64)block >> 40); + tf->hob_nsect = nsectors.b.high; + tf->hob_lbal = (u8)(block >> 24); + if (sizeof(block) != 4) { + tf->hob_lbam = (u8)((u64)block >> 32); + tf->hob_lbah = (u8)((u64)block >> 40); } + + tf->nsect = nsectors.b.low; + tf->lbal = (u8) block; + tf->lbam = (u8)(block >> 8); + tf->lbah = (u8)(block >> 16); #ifdef DEBUG printk("%s: 0x%02x%02x 0x%02x%02x%02x%02x%02x%02x\n", - drive->name, tasklets[3], tasklets[2], - tasklets[9], tasklets[8], tasklets[7], - tasklets[6], tasklets[5], tasklets[4]); + drive->name, tf->hob_nsect, tf->nsect, + tf->hob_lbah, tf->hob_lbam, tf->hob_lbal, + tf->lbah, tf->lbam, tf->lbal); #endif - hwif->OUTB(tasklets[1], IDE_FEATURE_REG); - hwif->OUTB(tasklets[3], IDE_NSECTOR_REG); - hwif->OUTB(tasklets[7], IDE_SECTOR_REG); - hwif->OUTB(tasklets[8], IDE_LCYL_REG); - hwif->OUTB(tasklets[9], IDE_HCYL_REG); - - hwif->OUTB(tasklets[0], IDE_FEATURE_REG); - hwif->OUTB(tasklets[2], IDE_NSECTOR_REG); - hwif->OUTB(tasklets[4], IDE_SECTOR_REG); - hwif->OUTB(tasklets[5], IDE_LCYL_REG); - hwif->OUTB(tasklets[6], IDE_HCYL_REG); - hwif->OUTB(0x00|drive->select.all,IDE_SELECT_REG); } else { - hwif->OUTB(0x00, IDE_FEATURE_REG); - hwif->OUTB(nsectors.b.low, IDE_NSECTOR_REG); - hwif->OUTB(block, IDE_SECTOR_REG); - hwif->OUTB(block>>=8, IDE_LCYL_REG); - hwif->OUTB(block>>=8, IDE_HCYL_REG); - hwif->OUTB(((block>>8)&0x0f)|drive->select.all,IDE_SELECT_REG); + tf->nsect = nsectors.b.low; + tf->lbal = block; + tf->lbam = block >>= 8; + tf->lbah = block >>= 8; + tf->device = (block >> 8) & 0xf; } } else { unsigned int sect,head,cyl,track; @@ -217,14 +201,29 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, pr_debug("%s: CHS=%u/%u/%u\n", drive->name, cyl, head, sect); - hwif->OUTB(0x00, IDE_FEATURE_REG); - hwif->OUTB(nsectors.b.low, IDE_NSECTOR_REG); - hwif->OUTB(sect, IDE_SECTOR_REG); - hwif->OUTB(cyl, IDE_LCYL_REG); - hwif->OUTB(cyl>>8, IDE_HCYL_REG); - hwif->OUTB(head|drive->select.all,IDE_SELECT_REG); + tf->nsect = nsectors.b.low; + tf->lbal = sect; + tf->lbam = cyl; + tf->lbah = cyl >> 8; + tf->device = head; } + if (drive->select.b.lba && lba48) { + hwif->OUTB(tf->hob_feature, IDE_FEATURE_REG); + hwif->OUTB(tf->hob_nsect, IDE_NSECTOR_REG); + hwif->OUTB(tf->hob_lbal, IDE_SECTOR_REG); + hwif->OUTB(tf->hob_lbam, IDE_LCYL_REG); + hwif->OUTB(tf->hob_lbah, IDE_HCYL_REG); + } + + hwif->OUTB(tf->feature, IDE_FEATURE_REG); + hwif->OUTB(tf->nsect, IDE_NSECTOR_REG); + hwif->OUTB(tf->lbal, IDE_SECTOR_REG); + hwif->OUTB(tf->lbam, IDE_LCYL_REG); + hwif->OUTB(tf->lbah, IDE_HCYL_REG); + + hwif->OUTB(tf->device | drive->select.all, IDE_SELECT_REG); + if (dma) { if (!hwif->dma_setup(drive)) { if (rq_data_dir(rq)) { -- cgit v1.2.3-59-g8ed1b From 9e42237f26cf517a3f682505f03a3a8d89b3b35d Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:07 +0100 Subject: ide: add ide_tf_load() helper Based on the earlier work by Tejun Heo. * Add 'tf_flags' field (for taskfile flags) to ide_task_t. * Add IDE_TFLAG_LBA48 taskfile flag for LBA48 taskfiles. * Add IDE_TFLAG_NO_SELECT_MASK taskfile flag for __ide_do_rw_disk() which doesn't use SELECT_MASK() (looks like a bug but it requires some more investigation). * Split off ide_tf_load() helper from do_rw_taskfile(). * Convert __ide_do_rw_disk() to use ide_tf_load(). There should be no functionality changes caused by this patch. Cc: Tejun Heo Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 28 +++++------------------ drivers/ide/ide-taskfile.c | 56 ++++++++++++++++++++++++++++------------------ include/linux/ide.h | 8 +++++++ 3 files changed, 48 insertions(+), 44 deletions(-) diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 20d357e9329d..6387222dd200 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -140,7 +140,8 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, u8 lba48 = (drive->addressing == 1) ? 1 : 0; u8 command = WIN_NOP; ata_nsector_t nsectors; - struct ide_taskfile ltf, *tf = <f; + ide_task_t task; + struct ide_taskfile *tf = &task.tf; nsectors.all = (u16) rq->nr_sectors; @@ -156,12 +157,8 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, ide_map_sg(drive, rq); } - if (IDE_CONTROL_REG) - hwif->OUTB(drive->ctl, IDE_CONTROL_REG); - - /* FIXME: SELECT_MASK(drive, 0) ? */ - - memset(tf, 0, sizeof(*tf)); + memset(&task, 0, sizeof(task)); + task.tf_flags = IDE_TFLAG_NO_SELECT_MASK; /* FIXME? */ if (drive->select.b.lba) { if (lba48) { @@ -185,6 +182,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, tf->hob_lbah, tf->hob_lbam, tf->hob_lbal, tf->lbah, tf->lbam, tf->lbal); #endif + task.tf_flags |= IDE_TFLAG_LBA48; } else { tf->nsect = nsectors.b.low; tf->lbal = block; @@ -208,21 +206,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, tf->device = head; } - if (drive->select.b.lba && lba48) { - hwif->OUTB(tf->hob_feature, IDE_FEATURE_REG); - hwif->OUTB(tf->hob_nsect, IDE_NSECTOR_REG); - hwif->OUTB(tf->hob_lbal, IDE_SECTOR_REG); - hwif->OUTB(tf->hob_lbam, IDE_LCYL_REG); - hwif->OUTB(tf->hob_lbah, IDE_HCYL_REG); - } - - hwif->OUTB(tf->feature, IDE_FEATURE_REG); - hwif->OUTB(tf->nsect, IDE_NSECTOR_REG); - hwif->OUTB(tf->lbal, IDE_SECTOR_REG); - hwif->OUTB(tf->lbam, IDE_LCYL_REG); - hwif->OUTB(tf->lbah, IDE_HCYL_REG); - - hwif->OUTB(tf->device | drive->select.all, IDE_SELECT_REG); + ide_tf_load(drive, &task); if (dma) { if (!hwif->dma_setup(drive)) { diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 5a1a9f7846b6..a79150e6be07 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -63,6 +63,37 @@ static void taskfile_output_data(ide_drive_t *drive, void *buffer, u32 wcount) } } +void ide_tf_load(ide_drive_t *drive, ide_task_t *task) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_taskfile *tf = &task->tf; + u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; + + if (IDE_CONTROL_REG) + hwif->OUTB(drive->ctl, IDE_CONTROL_REG); /* clear nIEN */ + + if ((task->tf_flags & IDE_TFLAG_NO_SELECT_MASK) == 0) + SELECT_MASK(drive, 0); + + if (task->tf_flags & IDE_TFLAG_LBA48) { + hwif->OUTB(tf->hob_feature, IDE_FEATURE_REG); + hwif->OUTB(tf->hob_nsect, IDE_NSECTOR_REG); + hwif->OUTB(tf->hob_lbal, IDE_SECTOR_REG); + hwif->OUTB(tf->hob_lbam, IDE_LCYL_REG); + hwif->OUTB(tf->hob_lbah, IDE_HCYL_REG); + } + + hwif->OUTB(tf->feature, IDE_FEATURE_REG); + hwif->OUTB(tf->nsect, IDE_NSECTOR_REG); + hwif->OUTB(tf->lbal, IDE_SECTOR_REG); + hwif->OUTB(tf->lbam, IDE_LCYL_REG); + hwif->OUTB(tf->lbah, IDE_HCYL_REG); + + hwif->OUTB((tf->device & HIHI) | drive->select.all, IDE_SELECT_REG); +} + +EXPORT_SYMBOL_GPL(ide_tf_load); + int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf) { ide_task_t args; @@ -83,30 +114,11 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) { ide_hwif_t *hwif = HWIF(drive); struct ide_taskfile *tf = &task->tf; - u8 HIHI = (drive->addressing == 1) ? 0xE0 : 0xEF; - /* ALL Command Block Executions SHALL clear nIEN, unless otherwise */ - if (IDE_CONTROL_REG) { - /* clear nIEN */ - hwif->OUTB(drive->ctl, IDE_CONTROL_REG); - } - SELECT_MASK(drive, 0); + if (drive->addressing == 1) + task->tf_flags |= IDE_TFLAG_LBA48; - if (drive->addressing == 1) { - hwif->OUTB(tf->hob_feature, IDE_FEATURE_REG); - hwif->OUTB(tf->hob_nsect, IDE_NSECTOR_REG); - hwif->OUTB(tf->hob_lbal, IDE_SECTOR_REG); - hwif->OUTB(tf->hob_lbam, IDE_LCYL_REG); - hwif->OUTB(tf->hob_lbah, IDE_HCYL_REG); - } - - hwif->OUTB(tf->feature, IDE_FEATURE_REG); - hwif->OUTB(tf->nsect, IDE_NSECTOR_REG); - hwif->OUTB(tf->lbal, IDE_SECTOR_REG); - hwif->OUTB(tf->lbam, IDE_LCYL_REG); - hwif->OUTB(tf->lbah, IDE_HCYL_REG); - - hwif->OUTB((tf->device & HIHI) | drive->select.all, IDE_SELECT_REG); + ide_tf_load(drive, task); if (task->handler != NULL) { if (task->prehandler != NULL) { diff --git a/include/linux/ide.h b/include/linux/ide.h index 69b78bb39caf..e25fd0b1dd79 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1060,6 +1060,11 @@ extern void ide_end_drive_cmd(ide_drive_t *, u8, u8); */ extern int ide_wait_cmd(ide_drive_t *, u8, u8, u8, u8, u8 *); +enum { + IDE_TFLAG_LBA48 = (1 << 0), + IDE_TFLAG_NO_SELECT_MASK = (1 << 1), +}; + struct ide_taskfile { u8 hob_data; /* 0: high data byte (for TASKFILE IOCTL) */ @@ -1094,6 +1099,7 @@ typedef struct ide_task_s { struct ide_taskfile tf; u8 tf_array[14]; }; + u8 tf_flags; ide_reg_valid_t tf_out_flags; ide_reg_valid_t tf_in_flags; int data_phase; @@ -1104,6 +1110,8 @@ typedef struct ide_task_s { void *special; /* valid_t generally */ } ide_task_t; +void ide_tf_load(ide_drive_t *, ide_task_t *); + extern u32 ide_read_24(ide_drive_t *); extern void SELECT_DRIVE(ide_drive_t *); -- cgit v1.2.3-59-g8ed1b From 9a3c49be5c5f7388eefb712be9a383904140532e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:07 +0100 Subject: ide: add ide_no_data_taskfile() helper * Add ide_no_data_taskfile() helper and convert ide_raw_taskfile() w/ NO DATA protocol users to use it instead. * Set ->data_phase explicitly in ide_no_data_taskfile() (TASKFILE_NO_DATA is defined as 0x0000). * Unexport task_no_data_intr(). Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-acpi.c | 7 ++----- drivers/ide/ide-disk.c | 32 ++++++++------------------------ drivers/ide/ide-taskfile.c | 12 ++++++++++-- include/linux/ide.h | 2 ++ 4 files changed, 22 insertions(+), 31 deletions(-) diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index 747c51889f7d..f0a6a3d6d2d3 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -383,9 +383,6 @@ static int taskfile_load_raw(ide_drive_t *drive, gtf->tfa[3], gtf->tfa[4], gtf->tfa[5], gtf->tfa[6]); memset(&args, 0, sizeof(ide_task_t)); - args.command_type = IDE_DRIVE_TASK_NO_DATA; - args.data_phase = TASKFILE_NO_DATA; - args.handler = &task_no_data_intr; /* convert gtf to IDE Taskfile */ memcpy(&args.tf_array[7], >f->tfa, 7); @@ -395,9 +392,9 @@ static int taskfile_load_raw(ide_drive_t *drive, return err; } - err = ide_raw_taskfile(drive, &args, NULL); + err = ide_no_data_taskfile(drive, &args); if (err) - printk(KERN_ERR "%s: ide_raw_taskfile failed: %u\n", + printk(KERN_ERR "%s: ide_no_data_taskfile failed: %u\n", __FUNCTION__, err); return err; diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 6387222dd200..b534fe97d476 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -303,10 +303,8 @@ static u64 idedisk_read_native_max_address(ide_drive_t *drive, int lba48) else tf->command = WIN_READ_NATIVE_MAX; tf->device = ATA_LBA; - args.command_type = IDE_DRIVE_TASK_NO_DATA; - args.handler = &task_no_data_intr; /* submit command request */ - ide_raw_taskfile(drive, &args, NULL); + ide_no_data_taskfile(drive, &args); /* if OK, compute maximum address value */ if ((tf->status & 0x01) == 0) { @@ -350,10 +348,8 @@ static u64 idedisk_set_max_address(ide_drive_t *drive, u64 addr_req, int lba48) tf->command = WIN_SET_MAX; } tf->device |= ATA_LBA; - args.command_type = IDE_DRIVE_TASK_NO_DATA; - args.handler = &task_no_data_intr; /* submit command request */ - ide_raw_taskfile(drive, &args, NULL); + ide_no_data_taskfile(drive, &args); /* if OK, compute maximum address value */ if ((tf->status & 0x01) == 0) { u32 high, low; @@ -500,9 +496,7 @@ static int smart_enable(ide_drive_t *drive) tf->lbam = SMART_LCYL_PASS; tf->lbah = SMART_HCYL_PASS; tf->command = WIN_SMART; - args.command_type = IDE_DRIVE_TASK_NO_DATA; - args.handler = &task_no_data_intr; - return ide_raw_taskfile(drive, &args, NULL); + return ide_no_data_taskfile(drive, &args); } static int get_smart_data(ide_drive_t *drive, u8 *buf, u8 sub_cmd) @@ -695,9 +689,7 @@ static int write_cache(ide_drive_t *drive, int arg) args.tf.feature = arg ? SETFEATURES_EN_WCACHE : SETFEATURES_DIS_WCACHE; args.tf.command = WIN_SETFEATURES; - args.command_type = IDE_DRIVE_TASK_NO_DATA; - args.handler = &task_no_data_intr; - err = ide_raw_taskfile(drive, &args, NULL); + err = ide_no_data_taskfile(drive, &args); if (err == 0) drive->wcache = arg; } @@ -716,9 +708,7 @@ static int do_idedisk_flushcache (ide_drive_t *drive) args.tf.command = WIN_FLUSH_CACHE_EXT; else args.tf.command = WIN_FLUSH_CACHE; - args.command_type = IDE_DRIVE_TASK_NO_DATA; - args.handler = &task_no_data_intr; - return ide_raw_taskfile(drive, &args, NULL); + return ide_no_data_taskfile(drive, &args); } static int set_acoustic (ide_drive_t *drive, int arg) @@ -732,9 +722,7 @@ static int set_acoustic (ide_drive_t *drive, int arg) args.tf.feature = arg ? SETFEATURES_EN_AAM : SETFEATURES_DIS_AAM; args.tf.nsect = arg; args.tf.command = WIN_SETFEATURES; - args.command_type = IDE_DRIVE_TASK_NO_DATA; - args.handler = &task_no_data_intr; - ide_raw_taskfile(drive, &args, NULL); + ide_no_data_taskfile(drive, &args); drive->acoustic = arg; return 0; } @@ -996,15 +984,13 @@ static int idedisk_open(struct inode *inode, struct file *filp) ide_task_t args; memset(&args, 0, sizeof(ide_task_t)); args.tf.command = WIN_DOORLOCK; - args.command_type = IDE_DRIVE_TASK_NO_DATA; - args.handler = &task_no_data_intr; check_disk_change(inode->i_bdev); /* * Ignore the return code from door_lock, * since the open() has already succeeded, * and the door_lock is irrelevant at this point. */ - if (drive->doorlocking && ide_raw_taskfile(drive, &args, NULL)) + if (drive->doorlocking && ide_no_data_taskfile(drive, &args)) drive->doorlocking = 0; } return 0; @@ -1023,9 +1009,7 @@ static int idedisk_release(struct inode *inode, struct file *filp) ide_task_t args; memset(&args, 0, sizeof(ide_task_t)); args.tf.command = WIN_DOORUNLOCK; - args.command_type = IDE_DRIVE_TASK_NO_DATA; - args.handler = &task_no_data_intr; - if (drive->doorlocking && ide_raw_taskfile(drive, &args, NULL)) + if (drive->doorlocking && ide_no_data_taskfile(drive, &args)) drive->doorlocking = 0; } diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index a79150e6be07..7cb674f81315 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -229,8 +229,6 @@ ide_startstop_t task_no_data_intr (ide_drive_t *drive) return ide_stopped; } -EXPORT_SYMBOL(task_no_data_intr); - static u8 wait_drive_not_busy(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); @@ -524,6 +522,16 @@ int ide_raw_taskfile (ide_drive_t *drive, ide_task_t *args, u8 *buf) EXPORT_SYMBOL(ide_raw_taskfile); +int ide_no_data_taskfile(ide_drive_t *drive, ide_task_t *task) +{ + task->command_type = IDE_DRIVE_TASK_NO_DATA; + task->data_phase = TASKFILE_NO_DATA; + task->handler = task_no_data_intr; + + return ide_raw_taskfile(drive, task, NULL); +} +EXPORT_SYMBOL_GPL(ide_no_data_taskfile); + #ifdef CONFIG_IDE_TASK_IOCTL int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) { diff --git a/include/linux/ide.h b/include/linux/ide.h index e25fd0b1dd79..11bfbc40c50a 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1140,6 +1140,8 @@ extern ide_startstop_t pre_task_out_intr(ide_drive_t *, struct request *); extern int ide_raw_taskfile(ide_drive_t *, ide_task_t *, u8 *); +int ide_no_data_taskfile(ide_drive_t *, ide_task_t *); + int ide_taskfile_ioctl(ide_drive_t *, unsigned int, unsigned long); int ide_cmd_ioctl(ide_drive_t *, unsigned int, unsigned long); int ide_task_ioctl(ide_drive_t *, unsigned int, unsigned long); -- cgit v1.2.3-59-g8ed1b From 74095a91ed02f6727b62d4416be00a041f2d7436 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:07 +0100 Subject: ide: use do_rw_taskfile() in flagged_taskfile() Based on the earlier work by Tejun Heo. * Move setting IDE_TFLAG_LBA48 taskfile flag from do_rw_taskfile() function to the callers. * Add IDE_TFLAG_FLAGGED taskfile flag for flagged taskfiles coming from ide_taskfile_ioctl(). Check it instead of ->tf_out_flags.all. * Add IDE_TFLAG_OUT_DATA taskfile flag to indicate the need to load IDE data register in ide_tf_load(). * Add IDE_TFLAG_OUT_* taskfile flags to indicate the need to load particular IDE taskfile registers in ide_tf_load(). * Update do_rw_taskfile() and ide_tf_load() users to set respective IDE_TFLAG_OUT_* taksfile flags. * Add task_dma_ok() helper. * Use IDE_TFLAG_FLAGGED taskfile flag to select HIHI mask in ide_tf_load(). * Use do_rw_taskfile() in flagged_taskfile(). * Remove no longer needed 'tf_out_flags' field from ide_task_t. There should be no functionality changes caused by this patch. Cc: Tejun Heo Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 3 +- drivers/ide/ide-io.c | 31 +++++--- drivers/ide/ide-taskfile.c | 180 ++++++++++++++++++--------------------------- include/linux/ide.h | 25 ++++++- 4 files changed, 119 insertions(+), 120 deletions(-) diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index b534fe97d476..6182c23d2020 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -159,6 +159,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, memset(&task, 0, sizeof(task)); task.tf_flags = IDE_TFLAG_NO_SELECT_MASK; /* FIXME? */ + task.tf_flags |= IDE_TFLAG_OUT_TF; if (drive->select.b.lba) { if (lba48) { @@ -182,7 +183,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, tf->hob_lbah, tf->hob_lbam, tf->hob_lbal, tf->lbah, tf->lbam, tf->lbal); #endif - task.tf_flags |= IDE_TFLAG_LBA48; + task.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_OUT_HOB); } else { tf->nsect = nsectors.b.low; tf->lbal = block; diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index dc984c5b0d13..33458fe7f490 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -192,15 +192,11 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * args->tf.command = WIN_FLUSH_CACHE_EXT; else args->tf.command = WIN_FLUSH_CACHE; - args->command_type = IDE_DRIVE_TASK_NO_DATA; - args->handler = &task_no_data_intr; - return do_rw_taskfile(drive, args); + goto out_do_tf; case idedisk_pm_standby: /* Suspend step 2 (standby) */ args->tf.command = WIN_STANDBYNOW1; - args->command_type = IDE_DRIVE_TASK_NO_DATA; - args->handler = &task_no_data_intr; - return do_rw_taskfile(drive, args); + goto out_do_tf; case idedisk_pm_restore_pio: /* Resume step 1 (restore PIO) */ ide_set_max_pio(drive); @@ -215,9 +211,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * case idedisk_pm_idle: /* Resume step 2 (idle) */ args->tf.command = WIN_IDLEIMMEDIATE; - args->command_type = IDE_DRIVE_TASK_NO_DATA; - args->handler = task_no_data_intr; - return do_rw_taskfile(drive, args); + goto out_do_tf; case ide_pm_restore_dma: /* Resume step 3 (restore DMA) */ /* @@ -236,6 +230,14 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * } pm->pm_step = ide_pm_state_completed; return ide_stopped; + +out_do_tf: + args->tf_flags = IDE_TFLAG_OUT_TF; + if (drive->addressing == 1) + args->tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_OUT_HOB); + args->command_type = IDE_DRIVE_TASK_NO_DATA; + args->handler = task_no_data_intr; + return do_rw_taskfile(drive, args); } /** @@ -730,6 +732,10 @@ static ide_startstop_t ide_disk_special(ide_drive_t *drive) return ide_stopped; } + args.tf_flags = IDE_TFLAG_OUT_TF; + if (drive->addressing == 1) + args.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_OUT_HOB); + do_rw_taskfile(drive, &args); return ide_started; @@ -883,8 +889,13 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, break; } - if (args->tf_out_flags.all != 0) + if (args->tf_flags & IDE_TFLAG_FLAGGED) return flagged_taskfile(drive, args); + + args->tf_flags |= IDE_TFLAG_OUT_TF; + if (drive->addressing == 1) + args->tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_OUT_HOB); + return do_rw_taskfile(drive, args); } else if (rq->cmd_type == REQ_TYPE_ATA_TASK) { u8 *args = rq->buffer; diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 7cb674f81315..a7668b459fe1 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -69,25 +69,39 @@ void ide_tf_load(ide_drive_t *drive, ide_task_t *task) struct ide_taskfile *tf = &task->tf; u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; + if (task->tf_flags & IDE_TFLAG_FLAGGED) + HIHI = 0xFF; + if (IDE_CONTROL_REG) hwif->OUTB(drive->ctl, IDE_CONTROL_REG); /* clear nIEN */ if ((task->tf_flags & IDE_TFLAG_NO_SELECT_MASK) == 0) SELECT_MASK(drive, 0); - if (task->tf_flags & IDE_TFLAG_LBA48) { + if (task->tf_flags & IDE_TFLAG_OUT_DATA) + hwif->OUTW((tf->hob_data << 8) | tf->data, IDE_DATA_REG); + + if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) hwif->OUTB(tf->hob_feature, IDE_FEATURE_REG); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) hwif->OUTB(tf->hob_nsect, IDE_NSECTOR_REG); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) hwif->OUTB(tf->hob_lbal, IDE_SECTOR_REG); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) hwif->OUTB(tf->hob_lbam, IDE_LCYL_REG); + if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) hwif->OUTB(tf->hob_lbah, IDE_HCYL_REG); - } - hwif->OUTB(tf->feature, IDE_FEATURE_REG); - hwif->OUTB(tf->nsect, IDE_NSECTOR_REG); - hwif->OUTB(tf->lbal, IDE_SECTOR_REG); - hwif->OUTB(tf->lbam, IDE_LCYL_REG); - hwif->OUTB(tf->lbah, IDE_HCYL_REG); + if (task->tf_flags & IDE_TFLAG_OUT_FEATURE) + hwif->OUTB(tf->feature, IDE_FEATURE_REG); + if (task->tf_flags & IDE_TFLAG_OUT_NSECT) + hwif->OUTB(tf->nsect, IDE_NSECTOR_REG); + if (task->tf_flags & IDE_TFLAG_OUT_LBAL) + hwif->OUTB(tf->lbal, IDE_SECTOR_REG); + if (task->tf_flags & IDE_TFLAG_OUT_LBAM) + hwif->OUTB(tf->lbam, IDE_LCYL_REG); + if (task->tf_flags & IDE_TFLAG_OUT_LBAH) + hwif->OUTB(tf->lbah, IDE_HCYL_REG); hwif->OUTB((tf->device & HIHI) | drive->select.all, IDE_SELECT_REG); } @@ -110,14 +124,30 @@ int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf) return ide_raw_taskfile(drive, &args, buf); } +static int inline task_dma_ok(ide_task_t *task) +{ + if (task->tf_flags & IDE_TFLAG_FLAGGED) + return 1; + + switch (task->tf.command) { + case WIN_WRITEDMA_ONCE: + case WIN_WRITEDMA: + case WIN_WRITEDMA_EXT: + case WIN_READDMA_ONCE: + case WIN_READDMA: + case WIN_READDMA_EXT: + case WIN_IDENTIFY_DMA: + return 1; + } + + return 0; +} + ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) { ide_hwif_t *hwif = HWIF(drive); struct ide_taskfile *tf = &task->tf; - if (drive->addressing == 1) - task->tf_flags |= IDE_TFLAG_LBA48; - ide_tf_load(drive, task); if (task->handler != NULL) { @@ -130,26 +160,10 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) return ide_started; } - if (!drive->using_dma) - return ide_stopped; - - switch (tf->command) { - case WIN_WRITEDMA_ONCE: - case WIN_WRITEDMA: - case WIN_WRITEDMA_EXT: - case WIN_READDMA_ONCE: - case WIN_READDMA: - case WIN_READDMA_EXT: - case WIN_IDENTIFY_DMA: - if (!hwif->dma_setup(drive)) { - hwif->dma_exec_cmd(drive, tf->command); - hwif->dma_start(drive); - return ide_started; - } - break; - default: - if (task->handler == NULL) - return ide_stopped; + if (task_dma_ok(task) && drive->using_dma && !hwif->dma_setup(drive)) { + hwif->dma_exec_cmd(drive, tf->command); + hwif->dma_start(drive); + return ide_started; } return ide_stopped; @@ -373,7 +387,7 @@ static void task_end_request(ide_drive_t *drive, struct request *rq, u8 stat) if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { ide_task_t *task = rq->special; - if (task->tf_out_flags.all) { + if (task->tf_flags & IDE_TFLAG_FLAGGED) { u8 err = drive->hwif->INB(IDE_ERROR_REG); ide_end_drive_cmd(drive, stat, err); return; @@ -594,10 +608,36 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) memcpy(&args.tf_array[0], req_task->hob_ports, HDIO_DRIVE_HOB_HDR_SIZE - 2); memcpy(&args.tf_array[6], req_task->io_ports, HDIO_DRIVE_TASK_HDR_SIZE); args.tf_in_flags = req_task->in_flags; - args.tf_out_flags = req_task->out_flags; args.data_phase = req_task->data_phase; args.command_type = req_task->req_cmd; + if (req_task->out_flags.all) { + args.tf_flags |= IDE_TFLAG_FLAGGED; + + if (req_task->out_flags.b.data) + args.tf_flags |= IDE_TFLAG_OUT_DATA; + + if (req_task->out_flags.b.nsector_hob) + args.tf_flags |= IDE_TFLAG_OUT_HOB_NSECT; + if (req_task->out_flags.b.sector_hob) + args.tf_flags |= IDE_TFLAG_OUT_HOB_LBAL; + if (req_task->out_flags.b.lcyl_hob) + args.tf_flags |= IDE_TFLAG_OUT_HOB_LBAM; + if (req_task->out_flags.b.hcyl_hob) + args.tf_flags |= IDE_TFLAG_OUT_HOB_LBAH; + + if (req_task->out_flags.b.error_feature) + args.tf_flags |= IDE_TFLAG_OUT_FEATURE; + if (req_task->out_flags.b.nsector) + args.tf_flags |= IDE_TFLAG_OUT_NSECT; + if (req_task->out_flags.b.sector) + args.tf_flags |= IDE_TFLAG_OUT_LBAL; + if (req_task->out_flags.b.lcyl) + args.tf_flags |= IDE_TFLAG_OUT_LBAM; + if (req_task->out_flags.b.hcyl) + args.tf_flags |= IDE_TFLAG_OUT_LBAH; + } + drive->io_32bit = 0; switch(req_task->data_phase) { case TASKFILE_OUT_DMAQ: @@ -649,7 +689,6 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) memcpy(req_task->hob_ports, &args.tf_array[0], HDIO_DRIVE_HOB_HDR_SIZE - 2); memcpy(req_task->io_ports, &args.tf_array[6], HDIO_DRIVE_TASK_HDR_SIZE); req_task->in_flags = args.tf_in_flags; - req_task->out_flags = args.tf_out_flags; if (copy_to_user(buf, req_task, tasksize)) { err = -EFAULT; @@ -782,9 +821,6 @@ int ide_task_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) */ ide_startstop_t flagged_taskfile (ide_drive_t *drive, ide_task_t *task) { - ide_hwif_t *hwif = HWIF(drive); - struct ide_taskfile *tf = &task->tf; - if (task->data_phase == TASKFILE_MULTI_IN || task->data_phase == TASKFILE_MULTI_OUT) { if (!drive->mult_count) { @@ -807,75 +843,5 @@ ide_startstop_t flagged_taskfile (ide_drive_t *drive, ide_task_t *task) task->tf_in_flags.all |= (IDE_HOB_STD_IN_FLAGS << 8); } - /* ALL Command Block Executions SHALL clear nIEN, unless otherwise */ - if (IDE_CONTROL_REG) - /* clear nIEN */ - hwif->OUTB(drive->ctl, IDE_CONTROL_REG); - SELECT_MASK(drive, 0); - - if (task->tf_out_flags.b.data) - hwif->OUTW((tf->hob_data << 8) | tf->data, IDE_DATA_REG); - - /* (ks) send hob registers first */ - if (task->tf_out_flags.b.nsector_hob) - hwif->OUTB(tf->hob_nsect, IDE_NSECTOR_REG); - if (task->tf_out_flags.b.sector_hob) - hwif->OUTB(tf->hob_lbal, IDE_SECTOR_REG); - if (task->tf_out_flags.b.lcyl_hob) - hwif->OUTB(tf->hob_lbam, IDE_LCYL_REG); - if (task->tf_out_flags.b.hcyl_hob) - hwif->OUTB(tf->hob_lbah, IDE_HCYL_REG); - - /* (ks) Send now the standard registers */ - if (task->tf_out_flags.b.error_feature) - hwif->OUTB(tf->feature, IDE_FEATURE_REG); - /* refers to number of sectors to transfer */ - if (task->tf_out_flags.b.nsector) - hwif->OUTB(tf->nsect, IDE_NSECTOR_REG); - /* refers to sector offset or start sector */ - if (task->tf_out_flags.b.sector) - hwif->OUTB(tf->lbal, IDE_SECTOR_REG); - if (task->tf_out_flags.b.lcyl) - hwif->OUTB(tf->lbam, IDE_LCYL_REG); - if (task->tf_out_flags.b.hcyl) - hwif->OUTB(tf->lbah, IDE_HCYL_REG); - - /* - * (ks) In the flagged taskfile approch, we will use all specified - * registers and the register value will not be changed, except the - * select bit (master/slave) in the drive_head register. We must make - * sure that the desired drive is selected. - */ - hwif->OUTB(tf->device | drive->select.all, IDE_SELECT_REG); - switch(task->data_phase) { - - case TASKFILE_OUT_DMAQ: - case TASKFILE_OUT_DMA: - case TASKFILE_IN_DMAQ: - case TASKFILE_IN_DMA: - if (!drive->using_dma) - break; - - if (!hwif->dma_setup(drive)) { - hwif->dma_exec_cmd(drive, tf->command); - hwif->dma_start(drive); - return ide_started; - } - break; - - default: - if (task->handler == NULL) - return ide_stopped; - - /* Issue the command */ - if (task->prehandler) { - hwif->OUTBSYNC(drive, tf->command, IDE_COMMAND_REG); - ndelay(400); /* FIXME */ - return task->prehandler(drive, task->rq); - } - ide_execute_command(drive, tf->command, task->handler, WAIT_WORSTCASE, NULL); - return ide_started; - } - - return ide_stopped; + return do_rw_taskfile(drive, task); } diff --git a/include/linux/ide.h b/include/linux/ide.h index 11bfbc40c50a..6dfee2a46f1b 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1063,6 +1063,28 @@ extern int ide_wait_cmd(ide_drive_t *, u8, u8, u8, u8, u8 *); enum { IDE_TFLAG_LBA48 = (1 << 0), IDE_TFLAG_NO_SELECT_MASK = (1 << 1), + IDE_TFLAG_FLAGGED = (1 << 2), + IDE_TFLAG_OUT_DATA = (1 << 3), + IDE_TFLAG_OUT_HOB_FEATURE = (1 << 4), + IDE_TFLAG_OUT_HOB_NSECT = (1 << 5), + IDE_TFLAG_OUT_HOB_LBAL = (1 << 6), + IDE_TFLAG_OUT_HOB_LBAM = (1 << 7), + IDE_TFLAG_OUT_HOB_LBAH = (1 << 8), + IDE_TFLAG_OUT_HOB = IDE_TFLAG_OUT_HOB_FEATURE | + IDE_TFLAG_OUT_HOB_NSECT | + IDE_TFLAG_OUT_HOB_LBAL | + IDE_TFLAG_OUT_HOB_LBAM | + IDE_TFLAG_OUT_HOB_LBAH, + IDE_TFLAG_OUT_FEATURE = (1 << 9), + IDE_TFLAG_OUT_NSECT = (1 << 10), + IDE_TFLAG_OUT_LBAL = (1 << 11), + IDE_TFLAG_OUT_LBAM = (1 << 12), + IDE_TFLAG_OUT_LBAH = (1 << 13), + IDE_TFLAG_OUT_TF = IDE_TFLAG_OUT_FEATURE | + IDE_TFLAG_OUT_NSECT | + IDE_TFLAG_OUT_LBAL | + IDE_TFLAG_OUT_LBAM | + IDE_TFLAG_OUT_LBAH, }; struct ide_taskfile { @@ -1099,8 +1121,7 @@ typedef struct ide_task_s { struct ide_taskfile tf; u8 tf_array[14]; }; - u8 tf_flags; - ide_reg_valid_t tf_out_flags; + u16 tf_flags; ide_reg_valid_t tf_in_flags; int data_phase; int command_type; -- cgit v1.2.3-59-g8ed1b From d26805fd025abe1ab8785b23a7942cfb6ceffd75 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:07 +0100 Subject: ide-pmac: fix pmac_ide_init_hwif_ports() * pmac_ide_init_hwif_ports() can be called by ide_init_hwif_ports() (through ppc_ide_md.ide_init_hwif hook) for non IDE PMAC interfaces. If this is the case the hw->io_ports[] should be already setup by ide_init_hwif_ports()->ide_std_init_ports() so remove redundant code from pmac_ide_init_hwif_ports(). As side-effect this change fixes ctl_addr == 0 special handling in ide_init_hwif_ports(). * Fix misleading comment while at it. Cc: Benjamin Herrenschmidt Cc: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ppc/pmac.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 7f7a59885777..4559e29446e9 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -438,13 +438,8 @@ pmac_ide_init_hwif_ports(hw_regs_t *hw, if (data_port == pmac_ide[ix].regbase) break; - if (ix >= MAX_HWIFS) { - /* Probably a PCI interface... */ - for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; ++i) - hw->io_ports[i] = data_port + i - IDE_DATA_OFFSET; - hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port; - return; - } + if (ix >= MAX_HWIFS) + return; /* not an IDE PMAC interface */ for (i = 0; i < 8; ++i) hw->io_ports[i] = data_port + i * 0x10; -- cgit v1.2.3-59-g8ed1b From 7b5da4be3718c6b4cd771fb82e3e481b04790f0e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:08 +0100 Subject: ide: remove IRQF_DISABLED from IRQ flags for IDE IRQ handler IRQF_DISABLED is not needed because the first thing that ide_intr() (IDE IRQ handler) does is calling spin_lock_irqsave() which disables local IRQs (IRQ unmasking is later handled by drive->unmask). kernel/irq/handle.c: irqreturn_t handle_IRQ_event(unsigned int irq, struct irqaction *action) ... if (!(action->flags & IRQF_DISABLED)) local_irq_enable_in_hardirq(); do { ret = action->handler(irq, action->dev_id); if (ret == IRQ_HANDLED) status |= action->flags; retval |= ret; action = action->next; } while (action); ... drivers/ide/ide-io.c: irqreturn_t ide_intr (int irq, void *dev_id) ... spin_lock_irqsave(&ide_lock, flags); ... spin_unlock(&ide_lock); ... if (drive->unmask) local_irq_enable_in_hardirq(); ... Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 0cb3d2bb3ab9..0dda7ac0d951 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -968,11 +968,6 @@ static int ide_init_queue(ide_drive_t *drive) * Much of the code is for correctly detecting/handling irq sharing * and irq serialization situations. This is somewhat complex because * it handles static as well as dynamic (PCMCIA) IDE interfaces. - * - * The IRQF_DISABLED in sa_flags means ide_intr() is always entered with - * interrupts completely disabled. This can be bad for interrupt latency, - * but anything else has led to problems on some machines. We re-enable - * interrupts as much as we can safely do in most places. */ static int init_irq (ide_hwif_t *hwif) { @@ -1055,17 +1050,13 @@ static int init_irq (ide_hwif_t *hwif) * Allocate the irq, if not already obtained for another hwif */ if (!match || match->irq != hwif->irq) { - int sa = IRQF_DISABLED; + int sa = 0; #if defined(__mc68000__) || defined(CONFIG_APUS) sa = IRQF_SHARED; #endif /* __mc68000__ || CONFIG_APUS */ - if (IDE_CHIPSET_IS_PCI(hwif->chipset)) { + if (IDE_CHIPSET_IS_PCI(hwif->chipset)) sa = IRQF_SHARED; -#ifndef CONFIG_IDEPCI_SHARE_IRQ - sa |= IRQF_DISABLED; -#endif /* CONFIG_IDEPCI_SHARE_IRQ */ - } if (hwif->io_ports[IDE_CONTROL_OFFSET]) /* clear nIEN */ -- cgit v1.2.3-59-g8ed1b From f1ca6d37f991347b87d86430db42e2ab139d1b1d Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:08 +0100 Subject: ide: remove CONFIG_IDEPCI_SHARE_IRQ config option We can safely remove CONFIG_IDEPCI_SHARE_IRQ and always support PCI IRQ sharing. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 12 ------------ drivers/ide/ide-iops.c | 2 -- 2 files changed, 14 deletions(-) diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index fb06555708a8..ee01e273a537 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -374,17 +374,6 @@ comment "PCI IDE chipsets support" config BLK_DEV_IDEPCI bool -config IDEPCI_SHARE_IRQ - bool "Sharing PCI IDE interrupts support" - depends on BLK_DEV_IDEPCI - help - Some ATA/IDE chipsets have hardware support which allows for - sharing a single IRQ with other cards. To enable support for - this in the ATA/IDE driver, say Y here. - - It is safe to say Y to this question, in most cases. - If unsure, say N. - config IDEPCI_PCIBUS_ORDER def_bool BLK_DEV_IDE=y && BLK_DEV_IDEPCI @@ -707,7 +696,6 @@ config BLK_DEV_SVWKS config BLK_DEV_SGIIOC4 tristate "Silicon Graphics IOC4 chipset ATA/ATAPI support" depends on (IA64_SGI_SN2 || IA64_GENERIC) && SGI_IOC4 - select IDEPCI_SHARE_IRQ select BLK_DEV_IDEDMA_PCI help This driver adds PIO & MultiMode DMA-2 support for the SGI IOC4 diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 4aac1cc7101d..6a6d1c188030 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -449,7 +449,6 @@ int drive_is_ready (ide_drive_t *drive) udelay(1); #endif -#ifdef CONFIG_IDEPCI_SHARE_IRQ /* * We do a passive status test under shared PCI interrupts on * cards that truly share the ATA side interrupt, but may also share @@ -459,7 +458,6 @@ int drive_is_ready (ide_drive_t *drive) if (IDE_CONTROL_REG) stat = hwif->INB(IDE_ALTSTATUS_REG); else -#endif /* CONFIG_IDEPCI_SHARE_IRQ */ /* Note: this may clear a pending IRQ!! */ stat = hwif->INB(IDE_STATUS_REG); -- cgit v1.2.3-59-g8ed1b From 4ee06b7e677da4c75f2fcc5fd850543852d18bf2 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:08 +0100 Subject: ide: remove stale ide.h "configuration options" Remove stale ide.h "configuration options": * INITIAL_MULT_COUNT - always defined to 0 * SUPPORT_SLOW_DATA_PORTS - unused * OK_TO_RESET_CONTROLLER - always defined to 1 * DISABLE_IRQ_NOSYNC - always defined to 0 Leave SUPPORT_VLB_SYNC (defined to 0 for CRIS and FRV, otherwise to 1) for now but disallow overriding it by . There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 4 ---- drivers/ide/ide-iops.c | 9 ++------- drivers/ide/ide-probe.c | 4 ++-- include/asm-cris/arch-v10/ide.h | 5 ----- include/asm-cris/arch-v32/ide.h | 5 ----- include/asm-frv/ide.h | 6 ------ include/asm-powerpc/ide.h | 3 --- include/linux/ide.h | 27 ++++----------------------- 8 files changed, 8 insertions(+), 55 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 33458fe7f490..4ea8419feeec 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -1469,12 +1469,8 @@ void ide_timer_expiry (unsigned long data) */ spin_unlock(&ide_lock); hwif = HWIF(drive); -#if DISABLE_IRQ_NOSYNC - disable_irq_nosync(hwif->irq); -#else /* disable_irq_nosync ?? */ disable_irq(hwif->irq); -#endif /* DISABLE_IRQ_NOSYNC */ /* local CPU only, * as if we were handling an interrupt */ local_irq_disable(); diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 6a6d1c188030..617888048eed 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -1050,8 +1050,7 @@ static void ide_disk_pre_reset(ide_drive_t *drive) drive->special.all = 0; drive->special.b.set_geometry = legacy; drive->special.b.recalibrate = legacy; - if (OK_TO_RESET_CONTROLLER) - drive->mult_count = 0; + drive->mult_count = 0; if (!drive->keep_settings && !drive->using_dma) drive->mult_req = 0; if (drive->mult_req != drive->mult_count) @@ -1136,7 +1135,6 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) for (unit = 0; unit < MAX_DRIVES; ++unit) pre_reset(&hwif->drives[unit]); -#if OK_TO_RESET_CONTROLLER if (!IDE_CONTROL_REG) { spin_unlock_irqrestore(&ide_lock, flags); return ide_stopped; @@ -1173,11 +1171,8 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) * state when the disks are reset this way. At least, the Winbond * 553 documentation says that */ - if (hwif->resetproc != NULL) { + if (hwif->resetproc) hwif->resetproc(drive); - } - -#endif /* OK_TO_RESET_CONTROLLER */ spin_unlock_irqrestore(&ide_lock, flags); return ide_started; diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 0dda7ac0d951..8e5d8dd315af 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -95,10 +95,10 @@ static void ide_disk_init_mult_count(ide_drive_t *drive) #ifdef CONFIG_IDEDISK_MULTI_MODE id->multsect = ((id->max_multsect/2) > 1) ? id->max_multsect : 0; id->multsect_valid = id->multsect ? 1 : 0; - drive->mult_req = id->multsect_valid ? id->max_multsect : INITIAL_MULT_COUNT; + drive->mult_req = id->multsect_valid ? id->max_multsect : 0; drive->special.b.set_multmode = drive->mult_req ? 1 : 0; #else /* original, pre IDE-NFG, per request of AC */ - drive->mult_req = INITIAL_MULT_COUNT; + drive->mult_req = 0; if (drive->mult_req > id->max_multsect) drive->mult_req = id->max_multsect; if (drive->mult_req || ((id->multsect_valid & 1) && id->multsect)) diff --git a/include/asm-cris/arch-v10/ide.h b/include/asm-cris/arch-v10/ide.h index 78b301ed7b12..ea34e0d0a388 100644 --- a/include/asm-cris/arch-v10/ide.h +++ b/include/asm-cris/arch-v10/ide.h @@ -89,11 +89,6 @@ static inline void ide_init_default_hwifs(void) } } -/* some configuration options we don't need */ - -#undef SUPPORT_VLB_SYNC -#define SUPPORT_VLB_SYNC 0 - #endif /* __KERNEL__ */ #endif /* __ASMCRIS_IDE_H */ diff --git a/include/asm-cris/arch-v32/ide.h b/include/asm-cris/arch-v32/ide.h index 11296170d057..fb9c3627a5b4 100644 --- a/include/asm-cris/arch-v32/ide.h +++ b/include/asm-cris/arch-v32/ide.h @@ -48,11 +48,6 @@ static inline unsigned long ide_default_io_base(int index) return REG_TYPE_CONV(unsigned long, reg_ata_rw_ctrl2, ctrl2); } -/* some configuration options we don't need */ - -#undef SUPPORT_VLB_SYNC -#define SUPPORT_VLB_SYNC 0 - #define IDE_ARCH_ACK_INTR #define ide_ack_intr(hwif) ((hwif)->ack_intr(hwif)) diff --git a/include/asm-frv/ide.h b/include/asm-frv/ide.h index f0bd2cb250c1..8c9a540d4344 100644 --- a/include/asm-frv/ide.h +++ b/include/asm-frv/ide.h @@ -18,12 +18,6 @@ #include #include -#undef SUPPORT_SLOW_DATA_PORTS -#define SUPPORT_SLOW_DATA_PORTS 0 - -#undef SUPPORT_VLB_SYNC -#define SUPPORT_VLB_SYNC 0 - #ifndef MAX_HWIFS #define MAX_HWIFS 8 #endif diff --git a/include/asm-powerpc/ide.h b/include/asm-powerpc/ide.h index fd7f5a430f0a..6d50310ecaea 100644 --- a/include/asm-powerpc/ide.h +++ b/include/asm-powerpc/ide.h @@ -42,9 +42,6 @@ struct ide_machdep_calls { extern struct ide_machdep_calls ppc_ide_md; -#undef SUPPORT_SLOW_DATA_PORTS -#define SUPPORT_SLOW_DATA_PORTS 0 - #define IDE_ARCH_OBSOLETE_DEFAULTS static __inline__ int ide_default_irq(unsigned long base) diff --git a/include/linux/ide.h b/include/linux/ide.h index 6dfee2a46f1b..0b088f18d422 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -27,25 +27,10 @@ #include #include -/****************************************************************************** - * IDE driver configuration options (play with these as desired): - * - * REALLY_SLOW_IO can be defined in ide.c and ide-cd.c, if necessary - */ -#define INITIAL_MULT_COUNT 0 /* off=0; on=2,4,8,16,32, etc.. */ - -#ifndef SUPPORT_SLOW_DATA_PORTS /* 1 to support slow data ports */ -#define SUPPORT_SLOW_DATA_PORTS 1 /* 0 to reduce kernel size */ -#endif -#ifndef SUPPORT_VLB_SYNC /* 1 to support weird 32-bit chips */ -#define SUPPORT_VLB_SYNC 1 /* 0 to reduce kernel size */ -#endif -#ifndef OK_TO_RESET_CONTROLLER /* 1 needed for good error recovery */ -#define OK_TO_RESET_CONTROLLER 1 /* 0 for use with AH2372A/B interface */ -#endif - -#ifndef DISABLE_IRQ_NOSYNC -#define DISABLE_IRQ_NOSYNC 0 +#if defined(CRIS) || defined(FRV) +# define SUPPORT_VLB_SYNC 0 +#else +# define SUPPORT_VLB_SYNC 1 #endif /* @@ -55,10 +40,6 @@ #define IDE_NO_IRQ (-1) -/* - * "No user-serviceable parts" beyond this point :) - *****************************************************************************/ - typedef unsigned char byte; /* used everywhere */ /* -- cgit v1.2.3-59-g8ed1b From d3bb03438c58b2a00f07a59175d4156a9952d825 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:08 +0100 Subject: ide-tape: remove dead USE_IOTRACE code Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 22 ---------------------- 1 file changed, 22 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 1495792d7917..90e902d233cf 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -614,16 +614,6 @@ typedef struct os_dat_s { /*************************** End of tunable parameters ***********************/ -/* - * Debugging/Performance analysis - * - * I/O trace support - */ -#define USE_IOTRACE 0 -#if USE_IOTRACE -#define IO_IDETAPE_FIFO 500 -#endif - /* * Read/Write error simulation */ @@ -2502,9 +2492,6 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, } if (rq->cmd[0] & REQ_IDETAPE_READ) { tape->buffer_head++; -#if USE_IOTRACE - IO_trace(IO_IDETAPE_FIFO, tape->pipeline_head, tape->buffer_head, tape->tape_head, tape->minor); -#endif tape->postpone_cnt = 0; pc = idetape_next_pc_storage(drive); idetape_create_read_cmd(tape, pc, rq->current_nr_sectors, (struct idetape_bh *)rq->special); @@ -2512,9 +2499,6 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, } if (rq->cmd[0] & REQ_IDETAPE_WRITE) { tape->buffer_head++; -#if USE_IOTRACE - IO_trace(IO_IDETAPE_FIFO, tape->pipeline_head, tape->buffer_head, tape->tape_head, tape->minor); -#endif tape->postpone_cnt = 0; pc = idetape_next_pc_storage(drive); idetape_create_write_cmd(tape, pc, rq->current_nr_sectors, (struct idetape_bh *)rq->special); @@ -3241,9 +3225,6 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks) idetape_switch_buffers(tape, new_stage); idetape_add_stage_tail(drive, new_stage); tape->pipeline_head++; -#if USE_IOTRACE - IO_trace(IO_IDETAPE_FIFO, tape->pipeline_head, tape->buffer_head, tape->tape_head, tape->minor); -#endif calculate_speeds(drive); /* @@ -3493,9 +3474,6 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks) idetape_remove_stage_head(drive); spin_unlock_irqrestore(&tape->spinlock, flags); tape->pipeline_head++; -#if USE_IOTRACE - IO_trace(IO_IDETAPE_FIFO, tape->pipeline_head, tape->buffer_head, tape->tape_head, tape->minor); -#endif calculate_speeds(drive); } #if IDETAPE_DEBUG_BUGS -- cgit v1.2.3-59-g8ed1b From 46f26c362d5109459f04f99e93fc0413d88516c8 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:09 +0100 Subject: ide: fix registers loading order for WIN_SMART in execute_drive_cmd() Fix registers loading order for REQ_TYPE_ATA_CMD request with WIN_SMART command in execute_drive_cmd() (load IDE_FEATURE_REG and IDE_SECTOR_REG before loading IDE_LCYL_REG and IDE_HCYL_REG). It shouldn't affect anything (just a usual paranoia to separate changes which change the way in which hardware is accessed from code cleanups). Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 4ea8419feeec..c616c9fb4832 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -932,10 +932,10 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, printk("xx=0x%02x\n", args[3]); #endif if (args[0] == WIN_SMART) { - hwif->OUTB(0x4f, IDE_LCYL_REG); - hwif->OUTB(0xc2, IDE_HCYL_REG); hwif->OUTB(args[2],IDE_FEATURE_REG); hwif->OUTB(args[1],IDE_SECTOR_REG); + hwif->OUTB(0x4f, IDE_LCYL_REG); + hwif->OUTB(0xc2, IDE_HCYL_REG); ide_cmd(drive, args[0], args[3], &drive_cmd_intr); return ide_started; } -- cgit v1.2.3-59-g8ed1b From 6dd87233bccc6416dac3b78ac912fd017918efe6 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:09 +0100 Subject: ide: fix registers loading order for IDE_NSECTOR_REG in execute_drive_cmd() Move loading of IDE_NSECTOR_REG from ide_cmd() to execute_drive_cmd() (load the IDE_NSECTOR_REG just after IDE_FEATURE_REG). This also allows us to drop 'nsect' argument from ide_cmd() and simplify execute_drive_cmd() code for REQ_TYPE_ATA_CMD case a bit. It shouldn't affect anything (just a usual paranoia to separate changes which change the way in which hardware is accessed from code cleanups). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index c616c9fb4832..c5d81df02007 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -624,21 +624,18 @@ ide_startstop_t ide_abort(ide_drive_t *drive, const char *msg) * ide_cmd - issue a simple drive command * @drive: drive the command is for * @cmd: command byte - * @nsect: sector byte * @handler: handler for the command completion * * Issue a simple drive command with interrupts. * The drive must be selected beforehand. */ -static void ide_cmd (ide_drive_t *drive, u8 cmd, u8 nsect, - ide_handler_t *handler) +static void ide_cmd(ide_drive_t *drive, u8 cmd, ide_handler_t *handler) { ide_hwif_t *hwif = HWIF(drive); if (IDE_CONTROL_REG) hwif->OUTB(drive->ctl,IDE_CONTROL_REG); /* clear nIEN */ SELECT_MASK(drive,0); - hwif->OUTB(nsect,IDE_NSECTOR_REG); ide_execute_command(drive, cmd, handler, WAIT_CMD, NULL); } @@ -913,11 +910,12 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, printk("sel=0x%02x\n", args[6]); #endif hwif->OUTB(args[1], IDE_FEATURE_REG); + hwif->OUTB(args[2], IDE_NSECTOR_REG); hwif->OUTB(args[3], IDE_SECTOR_REG); hwif->OUTB(args[4], IDE_LCYL_REG); hwif->OUTB(args[5], IDE_HCYL_REG); hwif->OUTB((args[6] & 0xEF)|drive->select.all, IDE_SELECT_REG); - ide_cmd(drive, args[0], args[2], &drive_cmd_intr); + ide_cmd(drive, args[0], &drive_cmd_intr); return ide_started; } else if (rq->cmd_type == REQ_TYPE_ATA_CMD) { u8 *args = rq->buffer; @@ -931,16 +929,15 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, printk("fr=0x%02x ", args[2]); printk("xx=0x%02x\n", args[3]); #endif + hwif->OUTB(args[2], IDE_FEATURE_REG); if (args[0] == WIN_SMART) { - hwif->OUTB(args[2],IDE_FEATURE_REG); + hwif->OUTB(args[3],IDE_NSECTOR_REG); hwif->OUTB(args[1],IDE_SECTOR_REG); hwif->OUTB(0x4f, IDE_LCYL_REG); hwif->OUTB(0xc2, IDE_HCYL_REG); - ide_cmd(drive, args[0], args[3], &drive_cmd_intr); - return ide_started; - } - hwif->OUTB(args[2],IDE_FEATURE_REG); - ide_cmd(drive, args[0], args[1], &drive_cmd_intr); + } else + hwif->OUTB(args[1], IDE_NSECTOR_REG); + ide_cmd(drive, args[0], &drive_cmd_intr); return ide_started; } -- cgit v1.2.3-59-g8ed1b From 21d535c91362a1a3bbb299b2e7214c1a6971ef95 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:09 +0100 Subject: ide: execute_drive_cmd() cleanup * Rename 'args' variable in 'if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE)' block to 'task'. * execute_drive_cmd() is used only for REQ_TYPE_ATA_{CMD,TASK,TASKFILE} so we can move the common code out from 'if (rq->cmd_type == REQ_TYPE_ATA_CMD)' and 'if (rq->cmd_type == REQ_TYPE_ATA_TASK)' blocks. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 42 ++++++++++++++++++++---------------------- 1 file changed, 20 insertions(+), 22 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index c5d81df02007..98aafc5cc5ba 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -867,13 +867,15 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, struct request *rq) { ide_hwif_t *hwif = HWIF(drive); + u8 *args = rq->buffer; + if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { - ide_task_t *args = rq->special; + ide_task_t *task = rq->special; - if (!args) + if (task == NULL) goto done; - hwif->data_phase = args->data_phase; + hwif->data_phase = task->data_phase; switch (hwif->data_phase) { case TASKFILE_MULTI_OUT: @@ -886,19 +888,20 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, break; } - if (args->tf_flags & IDE_TFLAG_FLAGGED) - return flagged_taskfile(drive, args); + if (task->tf_flags & IDE_TFLAG_FLAGGED) + return flagged_taskfile(drive, task); - args->tf_flags |= IDE_TFLAG_OUT_TF; + task->tf_flags |= IDE_TFLAG_OUT_TF; if (drive->addressing == 1) - args->tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_OUT_HOB); + task->tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_OUT_HOB); - return do_rw_taskfile(drive, args); - } else if (rq->cmd_type == REQ_TYPE_ATA_TASK) { - u8 *args = rq->buffer; - - if (!args) - goto done; + return do_rw_taskfile(drive, task); + } + + if (args == NULL) + goto done; + + if (rq->cmd_type == REQ_TYPE_ATA_TASK) { #ifdef DEBUG printk("%s: DRIVE_TASK_CMD ", drive->name); printk("cmd=0x%02x ", args[0]); @@ -915,13 +918,7 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, hwif->OUTB(args[4], IDE_LCYL_REG); hwif->OUTB(args[5], IDE_HCYL_REG); hwif->OUTB((args[6] & 0xEF)|drive->select.all, IDE_SELECT_REG); - ide_cmd(drive, args[0], &drive_cmd_intr); - return ide_started; - } else if (rq->cmd_type == REQ_TYPE_ATA_CMD) { - u8 *args = rq->buffer; - - if (!args) - goto done; + } else { /* rq->cmd_type == REQ_TYPE_ATA_CMD */ #ifdef DEBUG printk("%s: DRIVE_CMD ", drive->name); printk("cmd=0x%02x ", args[0]); @@ -937,10 +934,11 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, hwif->OUTB(0xc2, IDE_HCYL_REG); } else hwif->OUTB(args[1], IDE_NSECTOR_REG); - ide_cmd(drive, args[0], &drive_cmd_intr); - return ide_started; } + ide_cmd(drive, args[0], &drive_cmd_intr); + return ide_started; + done: /* * NULL is actually a valid way of waiting for -- cgit v1.2.3-59-g8ed1b From 54688aa372cbc83c4361bfb9236f9bfe02168e19 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:09 +0100 Subject: ide: remove ide_cmd() helper * Remove ide_cmd() helper. * Clear nIEN and call SELECT_MASK() before writing taskfile registers. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 26 ++++++-------------------- 1 file changed, 6 insertions(+), 20 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 98aafc5cc5ba..c5a7b3ac7c87 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -620,25 +620,6 @@ ide_startstop_t ide_abort(ide_drive_t *drive, const char *msg) return __ide_abort(drive, rq); } -/** - * ide_cmd - issue a simple drive command - * @drive: drive the command is for - * @cmd: command byte - * @handler: handler for the command completion - * - * Issue a simple drive command with interrupts. - * The drive must be selected beforehand. - */ - -static void ide_cmd(ide_drive_t *drive, u8 cmd, ide_handler_t *handler) -{ - ide_hwif_t *hwif = HWIF(drive); - if (IDE_CONTROL_REG) - hwif->OUTB(drive->ctl,IDE_CONTROL_REG); /* clear nIEN */ - SELECT_MASK(drive,0); - ide_execute_command(drive, cmd, handler, WAIT_CMD, NULL); -} - /** * drive_cmd_intr - drive command completion interrupt * @drive: drive the completion interrupt occurred on @@ -901,6 +882,11 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, if (args == NULL) goto done; + if (IDE_CONTROL_REG) + hwif->OUTB(drive->ctl, IDE_CONTROL_REG); /* clear nIEN */ + + SELECT_MASK(drive, 0); + if (rq->cmd_type == REQ_TYPE_ATA_TASK) { #ifdef DEBUG printk("%s: DRIVE_TASK_CMD ", drive->name); @@ -936,7 +922,7 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, hwif->OUTB(args[1], IDE_NSECTOR_REG); } - ide_cmd(drive, args[0], &drive_cmd_intr); + ide_execute_command(drive, args[0], &drive_cmd_intr, WAIT_CMD, NULL); return ide_started; done: -- cgit v1.2.3-59-g8ed1b From 807e35d695690011faa1ce3ad67dfc23c1e39bdc Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:10 +0100 Subject: ide: use ide_tf_load() in execute_drive_cmd() * Add IDE_TFLAG_OUT_DEVICE taskfile flag to indicate the need of writing the Device register and handle it in ide_tf_load(). Update ide_tf_load() and {do_rw,flagged}_taskfile() users accordingly. * Use struct ide_taskfile and ide_tf_load() in execute_drive_cmd(). * Make the debugging code dump all taskfile registers for both REQ_ATA_TYPE_{CMD,TASK} requests and move it to ide_tf_load() so it also covers REQ_ATA_TYPE_TASKFILE requests. There should be no functionality changes caused by this patch (unless DEBUG is defined). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 2 +- drivers/ide/ide-io.c | 60 +++++++++++++++++++--------------------------- drivers/ide/ide-taskfile.c | 10 +++++++- include/linux/ide.h | 1 + 4 files changed, 36 insertions(+), 37 deletions(-) diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 6182c23d2020..3e03d0c1a475 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -159,7 +159,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, memset(&task, 0, sizeof(task)); task.tf_flags = IDE_TFLAG_NO_SELECT_MASK; /* FIXME? */ - task.tf_flags |= IDE_TFLAG_OUT_TF; + task.tf_flags |= (IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE); if (drive->select.b.lba) { if (lba48) { diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index c5a7b3ac7c87..9ffab8c71e75 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -232,7 +232,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * return ide_stopped; out_do_tf: - args->tf_flags = IDE_TFLAG_OUT_TF; + args->tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; if (drive->addressing == 1) args->tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_OUT_HOB); args->command_type = IDE_DRIVE_TASK_NO_DATA; @@ -710,7 +710,7 @@ static ide_startstop_t ide_disk_special(ide_drive_t *drive) return ide_stopped; } - args.tf_flags = IDE_TFLAG_OUT_TF; + args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; if (drive->addressing == 1) args.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_OUT_HOB); @@ -849,6 +849,8 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, { ide_hwif_t *hwif = HWIF(drive); u8 *args = rq->buffer; + ide_task_t ltask; + struct ide_taskfile *tf = <ask.tf; if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { ide_task_t *task = rq->special; @@ -869,6 +871,8 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, break; } + task->tf_flags |= IDE_TFLAG_OUT_DEVICE; + if (task->tf_flags & IDE_TFLAG_FLAGGED) return flagged_taskfile(drive, task); @@ -882,46 +886,32 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, if (args == NULL) goto done; - if (IDE_CONTROL_REG) - hwif->OUTB(drive->ctl, IDE_CONTROL_REG); /* clear nIEN */ - - SELECT_MASK(drive, 0); - + memset(<ask, 0, sizeof(ltask)); if (rq->cmd_type == REQ_TYPE_ATA_TASK) { #ifdef DEBUG - printk("%s: DRIVE_TASK_CMD ", drive->name); - printk("cmd=0x%02x ", args[0]); - printk("fr=0x%02x ", args[1]); - printk("ns=0x%02x ", args[2]); - printk("sc=0x%02x ", args[3]); - printk("lcyl=0x%02x ", args[4]); - printk("hcyl=0x%02x ", args[5]); - printk("sel=0x%02x\n", args[6]); + printk("%s: DRIVE_TASK_CMD\n", drive->name); #endif - hwif->OUTB(args[1], IDE_FEATURE_REG); - hwif->OUTB(args[2], IDE_NSECTOR_REG); - hwif->OUTB(args[3], IDE_SECTOR_REG); - hwif->OUTB(args[4], IDE_LCYL_REG); - hwif->OUTB(args[5], IDE_HCYL_REG); - hwif->OUTB((args[6] & 0xEF)|drive->select.all, IDE_SELECT_REG); + memcpy(<ask.tf_array[7], &args[1], 6); + ltask.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; } else { /* rq->cmd_type == REQ_TYPE_ATA_CMD */ #ifdef DEBUG - printk("%s: DRIVE_CMD ", drive->name); - printk("cmd=0x%02x ", args[0]); - printk("sc=0x%02x ", args[1]); - printk("fr=0x%02x ", args[2]); - printk("xx=0x%02x\n", args[3]); + printk("%s: DRIVE_CMD\n", drive->name); #endif - hwif->OUTB(args[2], IDE_FEATURE_REG); - if (args[0] == WIN_SMART) { - hwif->OUTB(args[3],IDE_NSECTOR_REG); - hwif->OUTB(args[1],IDE_SECTOR_REG); - hwif->OUTB(0x4f, IDE_LCYL_REG); - hwif->OUTB(0xc2, IDE_HCYL_REG); - } else - hwif->OUTB(args[1], IDE_NSECTOR_REG); + tf->feature = args[2]; + if (args[0] == WIN_SMART) { + tf->nsect = args[3]; + tf->lbal = args[1]; + tf->lbam = 0x4f; + tf->lbah = 0xc2; + ltask.tf_flags = IDE_TFLAG_OUT_TF; + } else { + tf->nsect = args[1]; + ltask.tf_flags = IDE_TFLAG_OUT_FEATURE | + IDE_TFLAG_OUT_NSECT; + } } - + tf->command = args[0]; + ide_tf_load(drive, <ask); ide_execute_command(drive, args[0], &drive_cmd_intr, WAIT_CMD, NULL); return ide_started; diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index a7668b459fe1..8a5a10fdcfcb 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -72,6 +72,13 @@ void ide_tf_load(ide_drive_t *drive, ide_task_t *task) if (task->tf_flags & IDE_TFLAG_FLAGGED) HIHI = 0xFF; +#ifdef DEBUG + printk("%s: tf: feat 0x%02x nsect 0x%02x lbal 0x%02x " + "lbam 0x%02x lbah 0x%02x dev 0x%02x cmd 0x%02x\n", + drive->name, tf->feature, tf->nsect, tf->lbal, + tf->lbam, tf->lbah, tf->device, tf->command); +#endif + if (IDE_CONTROL_REG) hwif->OUTB(drive->ctl, IDE_CONTROL_REG); /* clear nIEN */ @@ -103,7 +110,8 @@ void ide_tf_load(ide_drive_t *drive, ide_task_t *task) if (task->tf_flags & IDE_TFLAG_OUT_LBAH) hwif->OUTB(tf->lbah, IDE_HCYL_REG); - hwif->OUTB((tf->device & HIHI) | drive->select.all, IDE_SELECT_REG); + if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) + hwif->OUTB((tf->device & HIHI) | drive->select.all, IDE_SELECT_REG); } EXPORT_SYMBOL_GPL(ide_tf_load); diff --git a/include/linux/ide.h b/include/linux/ide.h index 0b088f18d422..e1f652c6440c 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1066,6 +1066,7 @@ enum { IDE_TFLAG_OUT_LBAL | IDE_TFLAG_OUT_LBAM | IDE_TFLAG_OUT_LBAH, + IDE_TFLAG_OUT_DEVICE = (1 << 14), }; struct ide_taskfile { -- cgit v1.2.3-59-g8ed1b From 868e672ac8db650dde695a5707a6caf5a757e7d9 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:10 +0100 Subject: ide: use IDE_TFLAG_LBA48 for REQ_TYPE_ATA_TASKFILE requests * Use IDE_TFLAG_LBA48 for REQ_TYPE_ATA_TASKFILE requests in ide_end_drive_cmd() to decide whether we need to read HOB taskfile registers. * Update execute_drive_cmd() accordingly. This is a preparation for the next patch which removes unnecessary writes to HOB taskfile registers for some ATA commands. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 9ffab8c71e75..859cf7f4133f 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -374,7 +374,7 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err) tf->device = hwif->INB(IDE_SELECT_REG); tf->status = stat; - if (drive->addressing == 1) { + if (args->tf_flags & IDE_TFLAG_LBA48) { hwif->OUTB(drive->ctl|0x80, IDE_CONTROL_REG); tf->hob_feature = hwif->INB(IDE_FEATURE_REG); tf->hob_nsect = hwif->INB(IDE_NSECTOR_REG); @@ -872,13 +872,15 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, } task->tf_flags |= IDE_TFLAG_OUT_DEVICE; + if (drive->addressing == 1) + task->tf_flags |= IDE_TFLAG_LBA48; if (task->tf_flags & IDE_TFLAG_FLAGGED) return flagged_taskfile(drive, task); task->tf_flags |= IDE_TFLAG_OUT_TF; - if (drive->addressing == 1) - task->tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_OUT_HOB); + if (task->tf_flags & IDE_TFLAG_LBA48) + task->tf_flags |= IDE_TFLAG_OUT_HOB; return do_rw_taskfile(drive, task); } -- cgit v1.2.3-59-g8ed1b From a3bbb9d882dc94fe3a1361596ab9ce55d84059ea Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:10 +0100 Subject: ide: remove unnecessary writes to HOB taskfile registers * Set taskfile flags for REQ_TYPE_ATA_TASKFILE requests before adding the request to the queue. * Cleanup execute_drive_cmd(). * Remove unnecessary writes to HOB taskfile registers when using LBA48 disk for the following cases: - Power Management requests (WIN_FLUSH_CACHE[_EXT], WIN_STANDBYNOW1, WIN_IDLEIMMEDIATE commands) - special commands (WIN_SPECIFY, WIN_RESTORE, WIN_SETMULT) - Host Protected Area support (WIN_READ_NATIVE_MAX, WIN_SET_MAX) - /proc/ide/ SMART support (WIN_SMART with SMART_ENABLE, SMART_READ_VALUES and SMART_READ_THRESHOLDS subcommands) - write cache enabling/disabling in ide-disk (WIN_SETFEATURES with SETFEATURES_{EN,DIS}_WCACHE) - write cache flushing in ide-disk (WIN_FLUSH_CACHE[_EXT]) - acoustic management in ide-disk (WIN_SETFEATURES with SETFEATURES_{EN,DIS}_AAM) - door (un)locking in ide-disk (WIN_DOORLOCK, WIN_DOORUNLOCK) - /proc/ide/hd?/identify support (WIN_IDENTIFY) - ACPI _GTF taskfiles Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-acpi.c | 1 + drivers/ide/ide-disk.c | 13 +++++++++++++ drivers/ide/ide-io.c | 12 ------------ drivers/ide/ide-taskfile.c | 9 +++++++++ 4 files changed, 23 insertions(+), 12 deletions(-) diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index f0a6a3d6d2d3..e0bb0cfa7bdd 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -386,6 +386,7 @@ static int taskfile_load_raw(ide_drive_t *drive, /* convert gtf to IDE Taskfile */ memcpy(&args.tf_array[7], >f->tfa, 7); + args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; if (ide_noacpitfs) { DEBPRINT("_GTF execution disabled\n"); diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 3e03d0c1a475..fc785e760bd8 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -304,6 +304,9 @@ static u64 idedisk_read_native_max_address(ide_drive_t *drive, int lba48) else tf->command = WIN_READ_NATIVE_MAX; tf->device = ATA_LBA; + args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; + if (lba48) + args.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_OUT_HOB); /* submit command request */ ide_no_data_taskfile(drive, &args); @@ -349,6 +352,9 @@ static u64 idedisk_set_max_address(ide_drive_t *drive, u64 addr_req, int lba48) tf->command = WIN_SET_MAX; } tf->device |= ATA_LBA; + args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; + if (lba48) + args.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_OUT_HOB); /* submit command request */ ide_no_data_taskfile(drive, &args); /* if OK, compute maximum address value */ @@ -497,6 +503,7 @@ static int smart_enable(ide_drive_t *drive) tf->lbam = SMART_LCYL_PASS; tf->lbah = SMART_HCYL_PASS; tf->command = WIN_SMART; + args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; return ide_no_data_taskfile(drive, &args); } @@ -511,6 +518,7 @@ static int get_smart_data(ide_drive_t *drive, u8 *buf, u8 sub_cmd) tf->lbam = SMART_LCYL_PASS; tf->lbah = SMART_HCYL_PASS; tf->command = WIN_SMART; + args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; args.command_type = IDE_DRIVE_TASK_IN; args.data_phase = TASKFILE_IN; args.handler = &task_in_intr; @@ -690,6 +698,7 @@ static int write_cache(ide_drive_t *drive, int arg) args.tf.feature = arg ? SETFEATURES_EN_WCACHE : SETFEATURES_DIS_WCACHE; args.tf.command = WIN_SETFEATURES; + args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; err = ide_no_data_taskfile(drive, &args); if (err == 0) drive->wcache = arg; @@ -709,6 +718,7 @@ static int do_idedisk_flushcache (ide_drive_t *drive) args.tf.command = WIN_FLUSH_CACHE_EXT; else args.tf.command = WIN_FLUSH_CACHE; + args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; return ide_no_data_taskfile(drive, &args); } @@ -723,6 +733,7 @@ static int set_acoustic (ide_drive_t *drive, int arg) args.tf.feature = arg ? SETFEATURES_EN_AAM : SETFEATURES_DIS_AAM; args.tf.nsect = arg; args.tf.command = WIN_SETFEATURES; + args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; ide_no_data_taskfile(drive, &args); drive->acoustic = arg; return 0; @@ -985,6 +996,7 @@ static int idedisk_open(struct inode *inode, struct file *filp) ide_task_t args; memset(&args, 0, sizeof(ide_task_t)); args.tf.command = WIN_DOORLOCK; + args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; check_disk_change(inode->i_bdev); /* * Ignore the return code from door_lock, @@ -1010,6 +1022,7 @@ static int idedisk_release(struct inode *inode, struct file *filp) ide_task_t args; memset(&args, 0, sizeof(ide_task_t)); args.tf.command = WIN_DOORUNLOCK; + args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; if (drive->doorlocking && ide_no_data_taskfile(drive, &args)) drive->doorlocking = 0; } diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 859cf7f4133f..1526d79f87e4 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -233,8 +233,6 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * out_do_tf: args->tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; - if (drive->addressing == 1) - args->tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_OUT_HOB); args->command_type = IDE_DRIVE_TASK_NO_DATA; args->handler = task_no_data_intr; return do_rw_taskfile(drive, args); @@ -711,8 +709,6 @@ static ide_startstop_t ide_disk_special(ide_drive_t *drive) } args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; - if (drive->addressing == 1) - args.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_OUT_HOB); do_rw_taskfile(drive, &args); @@ -871,17 +867,9 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, break; } - task->tf_flags |= IDE_TFLAG_OUT_DEVICE; - if (drive->addressing == 1) - task->tf_flags |= IDE_TFLAG_LBA48; - if (task->tf_flags & IDE_TFLAG_FLAGGED) return flagged_taskfile(drive, task); - task->tf_flags |= IDE_TFLAG_OUT_TF; - if (task->tf_flags & IDE_TFLAG_LBA48) - task->tf_flags |= IDE_TFLAG_OUT_HOB; - return do_rw_taskfile(drive, task); } diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 8a5a10fdcfcb..7ae4a42cfa5a 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -126,6 +126,7 @@ int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf) args.tf.command = WIN_IDENTIFY; else args.tf.command = WIN_PIDENTIFY; + args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; args.command_type = IDE_DRIVE_TASK_IN; args.data_phase = TASKFILE_IN; args.handler = &task_in_intr; @@ -619,6 +620,10 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) args.data_phase = req_task->data_phase; args.command_type = req_task->req_cmd; + args.tf_flags = IDE_TFLAG_OUT_DEVICE; + if (drive->addressing == 1) + args.tf_flags |= IDE_TFLAG_LBA48; + if (req_task->out_flags.all) { args.tf_flags |= IDE_TFLAG_FLAGGED; @@ -644,6 +649,10 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) args.tf_flags |= IDE_TFLAG_OUT_LBAM; if (req_task->out_flags.b.hcyl) args.tf_flags |= IDE_TFLAG_OUT_LBAH; + } else { + args.tf_flags |= IDE_TFLAG_OUT_TF; + if (args.tf_flags & IDE_TFLAG_LBA48) + args.tf_flags |= IDE_TFLAG_OUT_HOB; } drive->io_32bit = 0; -- cgit v1.2.3-59-g8ed1b From 1f2564b8b56b305ab9acf5d387abca950180dff6 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:10 +0100 Subject: ide: extend timeout for REQ_TYPE_ATA_{CMD,TASK} requests Extend timeout for REQ_TYPE_ATA_{CMD,TASK} requests from WAIT_CMD (10sec) to WAIT_WORSTCASE (30sec, already used for REQ_TYPE_ATA_TASKFILE). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 1526d79f87e4..73e021267f3b 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -902,7 +902,7 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, } tf->command = args[0]; ide_tf_load(drive, <ask); - ide_execute_command(drive, args[0], &drive_cmd_intr, WAIT_CMD, NULL); + ide_execute_command(drive, args[0], &drive_cmd_intr, WAIT_WORSTCASE, NULL); return ide_started; done: -- cgit v1.2.3-59-g8ed1b From 813a0eb233ee67d7166241a8b389b6a76f2247f9 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:10 +0100 Subject: ide: switch idedisk_prepare_flush() to use REQ_TYPE_ATA_TASKFILE requests Based on the earlier work by Tejun Heo. There should be no functionality changes caused by this patch. Cc: Tejun Heo Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index fc785e760bd8..ffff96e6ab3e 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -601,19 +601,21 @@ static ide_proc_entry_t idedisk_proc[] = { static void idedisk_prepare_flush(struct request_queue *q, struct request *rq) { ide_drive_t *drive = q->queuedata; + ide_task_t task; - memset(rq->cmd, 0, sizeof(rq->cmd)); - + memset(&task, 0, sizeof(task)); if (ide_id_has_flush_cache_ext(drive->id) && (drive->capacity64 >= (1UL << 28))) - rq->cmd[0] = WIN_FLUSH_CACHE_EXT; + task.tf.command = WIN_FLUSH_CACHE_EXT; else - rq->cmd[0] = WIN_FLUSH_CACHE; - + task.tf.command = WIN_FLUSH_CACHE; + task.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; + task.command_type = IDE_DRIVE_TASK_NO_DATA; + task.handler = task_no_data_intr; - rq->cmd_type = REQ_TYPE_ATA_TASK; + rq->cmd_type = REQ_TYPE_ATA_TASKFILE; rq->cmd_flags |= REQ_SOFTBARRIER; - rq->buffer = rq->cmd; + rq->special = &task; } /* -- cgit v1.2.3-59-g8ed1b From 14b89ef9814614f18a1fcae51e601e7e16a82ef7 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:11 +0100 Subject: ide: switch ide_task_ioctl() to use REQ_TYPE_ATA_TASKFILE requests Based on the earlier work by Tejun Heo. There should be no functionality changes caused by this patch. Cc: Tejun Heo Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-taskfile.c | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 7ae4a42cfa5a..7c8e9802898a 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -806,28 +806,29 @@ abort: return err; } -static int ide_wait_cmd_task(ide_drive_t *drive, u8 *buf) -{ - struct request rq; - - ide_init_drive_cmd(&rq); - rq.cmd_type = REQ_TYPE_ATA_TASK; - rq.buffer = buf; - return ide_do_drive_cmd(drive, &rq, ide_wait); -} - int ide_task_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) { void __user *p = (void __user *)arg; int err = 0; - u8 args[7], *argbuf = args; - int argsize = 7; + u8 args[7]; + ide_task_t task; if (copy_from_user(args, p, 7)) return -EFAULT; - err = ide_wait_cmd_task(drive, argbuf); - if (copy_to_user(p, argbuf, argsize)) + + memset(&task, 0, sizeof(task)); + memcpy(&task.tf_array[7], &args[1], 6); + task.tf.command = args[0]; + task.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; + + err = ide_no_data_taskfile(drive, &task); + + args[0] = task.tf.command; + memcpy(&args[1], &task.tf_array[7], 6); + + if (copy_to_user(p, args, 7)) err = -EFAULT; + return err; } -- cgit v1.2.3-59-g8ed1b From 29ed2a5f8c4380959f18e9cbaff13bc61e09889c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:11 +0100 Subject: ide: remove REQ_TYPE_ATA_TASK Based on the earlier work by Tejun Heo. All users are gone so we can finally remove it. Cc: Tejun Heo Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 25 +------------------------ drivers/ide/ide-lib.c | 3 +-- include/linux/blkdev.h | 1 - 3 files changed, 2 insertions(+), 27 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 73e021267f3b..d36df77c7519 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -332,22 +332,6 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err) args[1] = err; args[2] = hwif->INB(IDE_NSECTOR_REG); } - } else if (rq->cmd_type == REQ_TYPE_ATA_TASK) { - u8 *args = (u8 *) rq->buffer; - if (rq->errors == 0) - rq->errors = !OK_STAT(stat,READY_STAT,BAD_STAT); - - if (args) { - args[0] = stat; - args[1] = err; - /* be sure we're looking at the low order bits */ - hwif->OUTB(drive->ctl & ~0x80, IDE_CONTROL_REG); - args[2] = hwif->INB(IDE_NSECTOR_REG); - args[3] = hwif->INB(IDE_SECTOR_REG); - args[4] = hwif->INB(IDE_LCYL_REG); - args[5] = hwif->INB(IDE_HCYL_REG); - args[6] = hwif->INB(IDE_SELECT_REG); - } } else if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { ide_task_t *args = (ide_task_t *) rq->special; if (rq->errors == 0) @@ -877,13 +861,7 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, goto done; memset(<ask, 0, sizeof(ltask)); - if (rq->cmd_type == REQ_TYPE_ATA_TASK) { -#ifdef DEBUG - printk("%s: DRIVE_TASK_CMD\n", drive->name); -#endif - memcpy(<ask.tf_array[7], &args[1], 6); - ltask.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; - } else { /* rq->cmd_type == REQ_TYPE_ATA_CMD */ + if (rq->cmd_type == REQ_TYPE_ATA_CMD) { #ifdef DEBUG printk("%s: DRIVE_CMD\n", drive->name); #endif @@ -1011,7 +989,6 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) ide_config_drive_speed(drive, drive->desired_speed); if (rq->cmd_type == REQ_TYPE_ATA_CMD || - rq->cmd_type == REQ_TYPE_ATA_TASK || rq->cmd_type == REQ_TYPE_ATA_TASKFILE) return execute_drive_cmd(drive, rq); else if (blk_pm_request(rq)) { diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 6dbf2af0d215..3bae2c46924f 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -458,8 +458,7 @@ static void ide_dump_opcode(ide_drive_t *drive) spin_unlock(&ide_lock); if (!rq) return; - if (rq->cmd_type == REQ_TYPE_ATA_CMD || - rq->cmd_type == REQ_TYPE_ATA_TASK) { + if (rq->cmd_type == REQ_TYPE_ATA_CMD) { char *args = rq->buffer; if (args) { opcode = args[0]; diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index d18ee67b40f8..40ee1706caa3 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -144,7 +144,6 @@ enum rq_cmd_type_bits { * private REQ_LB opcodes to differentiate what type of request this is */ REQ_TYPE_ATA_CMD, - REQ_TYPE_ATA_TASK, REQ_TYPE_ATA_TASKFILE, REQ_TYPE_ATA_PC, }; -- cgit v1.2.3-59-g8ed1b From 918337a85366ad0f1c4c08ebe45e4fb1e3a3c15f Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:11 +0100 Subject: ide-floppy: remove dead code Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 33 --------------------------------- 1 file changed, 33 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 04a357808f2e..53f90257a8f0 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -369,27 +369,6 @@ typedef struct ide_floppy_obj { #define IDEFLOPPY_IOCTL_FORMAT_START 0x4602 #define IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS 0x4603 -#if 0 -/* - * Special requests for our block device strategy routine. - */ -#define IDEFLOPPY_FIRST_RQ 90 - -/* - * IDEFLOPPY_PC_RQ is used to queue a packet command in the request queue. - */ -#define IDEFLOPPY_PC_RQ 90 - -#define IDEFLOPPY_LAST_RQ 90 - -/* - * A macro which can be used to check if a given request command - * originated in the driver or in the buffer cache layer. - */ -#define IDEFLOPPY_RQ_CMD(cmd) ((cmd >= IDEFLOPPY_FIRST_RQ) && (cmd <= IDEFLOPPY_LAST_RQ)) - -#endif - /* * Error codes which are returned in rq->errors to the higher part * of the driver. @@ -1045,18 +1024,6 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p atapi_bcount_t bcount; ide_handler_t *pkt_xfer_routine; -#if 0 /* Accessing floppy->pc is not valid here, the previous pc may be gone - and have lived on another thread's stack; that stack may have become - unmapped meanwhile (CONFIG_DEBUG_PAGEALLOC). */ -#if IDEFLOPPY_DEBUG_BUGS - if (floppy->pc->c[0] == IDEFLOPPY_REQUEST_SENSE_CMD && - pc->c[0] == IDEFLOPPY_REQUEST_SENSE_CMD) { - printk(KERN_ERR "ide-floppy: possible ide-floppy.c bug - " - "Two request sense in serial were issued\n"); - } -#endif /* IDEFLOPPY_DEBUG_BUGS */ -#endif - if (floppy->failed_pc == NULL && pc->c[0] != IDEFLOPPY_REQUEST_SENSE_CMD) floppy->failed_pc = pc; -- cgit v1.2.3-59-g8ed1b From 6a2144146aa2e0eb60e48ba73ac0e1c51346edf6 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:11 +0100 Subject: ide: CPU endianness doesn't matter for special_t special_t is used only internally by the IDE subsystem (it isn't related to hardware registers and isn't exported to the user-space). Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/include/linux/ide.h b/include/linux/ide.h index e1f652c6440c..c6ffc2028fb5 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -306,23 +306,12 @@ static inline void ide_init_hwif_ports(hw_regs_t *hw, typedef union { unsigned all : 8; struct { -#if defined(__LITTLE_ENDIAN_BITFIELD) unsigned set_geometry : 1; unsigned recalibrate : 1; unsigned set_multmode : 1; unsigned set_tune : 1; unsigned serviced : 1; unsigned reserved : 3; -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned reserved : 3; - unsigned serviced : 1; - unsigned set_tune : 1; - unsigned set_multmode : 1; - unsigned recalibrate : 1; - unsigned set_geometry : 1; -#else -#error "Please fix " -#endif } b; } special_t; -- cgit v1.2.3-59-g8ed1b From 22c525b976778cce5bb6f8fdcc70046168c54b1a Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:11 +0100 Subject: ide: remove ata_status_t and atapi_status_t Remove ata_status_t (unused) and atapi_status_t. While at it: * replace 'HWIF(drive)' by 'drive->hwif' (or just 'hwif' where possible) Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 14 +++++++------- drivers/ide/ide-lib.c | 21 +++++++++------------ drivers/ide/ide-tape.c | 34 +++++++++++++++++----------------- drivers/scsi/ide-scsi.c | 9 ++++----- include/linux/ide.h | 44 -------------------------------------------- 5 files changed, 37 insertions(+), 85 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 53f90257a8f0..7b94c7aff256 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -788,12 +788,12 @@ static void idefloppy_retry_pc (ide_drive_t *drive) static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; - atapi_status_t status; atapi_bcount_t bcount; atapi_ireason_t ireason; idefloppy_pc_t *pc = floppy->pc; struct request *rq = pc->rq; unsigned int temp; + u8 stat; debug_log(KERN_INFO "ide-floppy: Reached %s interrupt handler\n", __FUNCTION__); @@ -809,16 +809,16 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) } /* Clear the interrupt */ - status.all = HWIF(drive)->INB(IDE_STATUS_REG); + stat = drive->hwif->INB(IDE_STATUS_REG); - if (!status.b.drq) { /* No more interrupts */ + if ((stat & DRQ_STAT) == 0) { /* No more interrupts */ debug_log(KERN_INFO "Packet command completed, %d bytes " "transferred\n", pc->actually_transferred); clear_bit(PC_DMA_IN_PROGRESS, &pc->flags); local_irq_enable_in_hardirq(); - if (status.b.check || test_bit(PC_DMA_ERROR, &pc->flags)) { + if ((stat & ERR_STAT) || test_bit(PC_DMA_ERROR, &pc->flags)) { /* Error detected */ debug_log(KERN_INFO "ide-floppy: %s: I/O error\n", drive->name); @@ -1632,14 +1632,14 @@ static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg) /* Else assume format_unit has finished, and we're ** at 0x10000 */ } else { - atapi_status_t status; unsigned long flags; + u8 stat; local_irq_save(flags); - status.all = HWIF(drive)->INB(IDE_STATUS_REG); + stat = drive->hwif->INB(IDE_STATUS_REG); local_irq_restore(flags); - progress_indication = !status.b.dsc ? 0 : 0x10000; + progress_indication = ((stat & SEEK_STAT) == 0) ? 0 : 0x10000; } if (put_user(progress_indication, arg)) return (-EFAULT); diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 3bae2c46924f..dc7e539b4d0b 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -562,27 +562,24 @@ static u8 ide_dump_ata_status(ide_drive_t *drive, const char *msg, u8 stat) static u8 ide_dump_atapi_status(ide_drive_t *drive, const char *msg, u8 stat) { unsigned long flags; - - atapi_status_t status; atapi_error_t error; - status.all = stat; error.all = 0; local_irq_save(flags); printk("%s: %s: status=0x%02x { ", drive->name, msg, stat); - if (status.b.bsy) + if (stat & BUSY_STAT) printk("Busy "); else { - if (status.b.drdy) printk("DriveReady "); - if (status.b.df) printk("DeviceFault "); - if (status.b.dsc) printk("SeekComplete "); - if (status.b.drq) printk("DataRequest "); - if (status.b.corr) printk("CorrectedError "); - if (status.b.idx) printk("Index "); - if (status.b.check) printk("Error "); + if (stat & READY_STAT) printk("DriveReady "); + if (stat & WRERR_STAT) printk("DeviceFault "); + if (stat & SEEK_STAT) printk("SeekComplete "); + if (stat & DRQ_STAT) printk("DataRequest "); + if (stat & ECC_STAT) printk("CorrectedError "); + if (stat & INDEX_STAT) printk("Index "); + if (stat & ERR_STAT) printk("Error "); } printk("}\n"); - if (status.b.check && !status.b.bsy) { + if ((stat & (BUSY_STAT|ERR_STAT)) == ERR_STAT) { error.all = HWIF(drive)->INB(IDE_ERROR_REG); printk("%s: %s: error=0x%02x { ", drive->name, msg, error.all); if (error.b.ili) printk("IllegalLengthIndication "); diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 90e902d233cf..c91039505436 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -1848,15 +1848,14 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; idetape_tape_t *tape = drive->driver_data; - atapi_status_t status; atapi_bcount_t bcount; atapi_ireason_t ireason; idetape_pc_t *pc = tape->pc; - unsigned int temp; #if SIMULATE_ERRORS static int error_sim_count = 0; #endif + u8 stat; #if IDETAPE_DEBUG_LOG if (tape->debug_level >= 4) @@ -1865,10 +1864,10 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) #endif /* IDETAPE_DEBUG_LOG */ /* Clear the interrupt */ - status.all = HWIF(drive)->INB(IDE_STATUS_REG); + stat = hwif->INB(IDE_STATUS_REG); if (test_bit(PC_DMA_IN_PROGRESS, &pc->flags)) { - if (HWIF(drive)->ide_dma_end(drive) || status.b.check) { + if (hwif->ide_dma_end(drive) || (stat & ERR_STAT)) { /* * A DMA error is sometimes expected. For example, * if the tape is crossing a filemark during a @@ -1902,7 +1901,7 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) } /* No more interrupts */ - if (!status.b.drq) { + if ((stat & DRQ_STAT) == 0) { #if IDETAPE_DEBUG_LOG if (tape->debug_level >= 2) printk(KERN_INFO "ide-tape: Packet command completed, %d bytes transferred\n", pc->actually_transferred); @@ -1917,12 +1916,13 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) (++error_sim_count % 100) == 0) { printk(KERN_INFO "ide-tape: %s: simulating error\n", tape->name); - status.b.check = 1; + stat |= ERR_STAT; } #endif - if (status.b.check && pc->c[0] == IDETAPE_REQUEST_SENSE_CMD) - status.b.check = 0; - if (status.b.check || test_bit(PC_DMA_ERROR, &pc->flags)) { /* Error detected */ + if ((stat & ERR_STAT) && pc->c[0] == IDETAPE_REQUEST_SENSE_CMD) + stat &= ~ERR_STAT; + if ((stat & ERR_STAT) || test_bit(PC_DMA_ERROR, &pc->flags)) { + /* Error detected */ #if IDETAPE_DEBUG_LOG if (tape->debug_level >= 1) printk(KERN_INFO "ide-tape: %s: I/O error\n", @@ -1941,7 +1941,7 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) } pc->error = 0; if (test_bit(PC_WAIT_FOR_DSC, &pc->flags) && - !status.b.dsc) { + (stat & SEEK_STAT) == 0) { /* Media access command */ tape->dsc_polling_start = jiffies; tape->dsc_polling_frequency = IDETAPE_DSC_MA_FAST; @@ -2285,11 +2285,11 @@ static ide_startstop_t idetape_media_access_finished (ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; idetape_pc_t *pc = tape->pc; - atapi_status_t status; + u8 stat; - status.all = HWIF(drive)->INB(IDE_STATUS_REG); - if (status.b.dsc) { - if (status.b.check) { + stat = drive->hwif->INB(IDE_STATUS_REG); + if (stat & SEEK_STAT) { + if (stat & ERR_STAT) { /* Error detected */ if (pc->c[0] != IDETAPE_TEST_UNIT_READY_CMD) printk(KERN_ERR "ide-tape: %s: I/O error, ", @@ -2407,7 +2407,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, idetape_tape_t *tape = drive->driver_data; idetape_pc_t *pc = NULL; struct request *postponed_rq = tape->postponed_rq; - atapi_status_t status; + u8 stat; #if IDETAPE_DEBUG_LOG #if 0 @@ -2455,7 +2455,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, * If the tape is still busy, postpone our request and service * the other device meanwhile. */ - status.all = HWIF(drive)->INB(IDE_STATUS_REG); + stat = drive->hwif->INB(IDE_STATUS_REG); if (!drive->dsc_overlap && !(rq->cmd[0] & REQ_IDETAPE_PC2)) set_bit(IDETAPE_IGNORE_DSC, &tape->flags); @@ -2471,7 +2471,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, tape->insert_speed = tape->insert_size / 1024 * HZ / (jiffies - tape->insert_time); calculate_speeds(drive); if (!test_and_clear_bit(IDETAPE_IGNORE_DSC, &tape->flags) && - !status.b.dsc) { + (stat & SEEK_STAT) == 0) { if (postponed_rq == NULL) { tape->dsc_polling_start = jiffies; tape->dsc_polling_frequency = tape->best_dsc_rw_frequency; diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 9706de9d98d5..bd2b56912472 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -398,11 +398,10 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) idescsi_pc_t *pc=scsi->pc; struct request *rq = pc->rq; atapi_bcount_t bcount; - atapi_status_t status; atapi_ireason_t ireason; atapi_feature_t feature; - unsigned int temp; + u8 stat; #if IDESCSI_DEBUG_LOG printk (KERN_INFO "ide-scsi: Reached idescsi_pc_intr interrupt handler\n"); @@ -427,14 +426,14 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) feature.all = 0; /* Clear the interrupt */ - status.all = HWIF(drive)->INB(IDE_STATUS_REG); + stat = drive->hwif->INB(IDE_STATUS_REG); - if (!status.b.drq) { + if ((stat & DRQ_STAT) == 0) { /* No more interrupts */ if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) printk (KERN_INFO "Packet command completed, %d bytes transferred\n", pc->actually_transferred); local_irq_enable_in_hardirq(); - if (status.b.check) + if (stat & ERR_STAT) rq->errors++; idescsi_end_request (drive, 1, 0); return ide_stopped; diff --git a/include/linux/ide.h b/include/linux/ide.h index c6ffc2028fb5..921cf717f22a 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -365,50 +365,6 @@ typedef union { } b; } select_t, ata_select_t; -/* - * The ATA-IDE Status Register. - * The ATAPI Status Register. - * - * check : Error occurred - * idx : Index Error - * corr : Correctable error occurred - * drq : Data is request by the device - * dsc : Disk Seek Complete : ata - * : Media access command finished : atapi - * df : Device Fault : ata - * : Reserved : atapi - * drdy : Ready, Command Mode Capable : ata - * : Ignored for ATAPI commands : atapi - * bsy : Disk is Busy - * : The device has access to the command block - */ -typedef union { - unsigned all :8; - struct { -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned check :1; - unsigned idx :1; - unsigned corr :1; - unsigned drq :1; - unsigned dsc :1; - unsigned df :1; - unsigned drdy :1; - unsigned bsy :1; -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned bsy :1; - unsigned drdy :1; - unsigned df :1; - unsigned dsc :1; - unsigned drq :1; - unsigned corr :1; - unsigned idx :1; - unsigned check :1; -#else -#error "Please fix " -#endif - } b; -} ata_status_t, atapi_status_t; - /* * ATAPI Feature Register * -- cgit v1.2.3-59-g8ed1b From 0e38a66a1e69821ab57a06d5a7b11f0df9275bf4 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:12 +0100 Subject: ide: remove atapi_error_t (take 2) Remove atapi_error_t. While at it: * replace 'HWIF(drive)' by 'drive->hwif' v2: * Add {ILI,EOM,LFS}_ERR defines to . Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 3 +-- drivers/ide/ide-lib.c | 21 ++++++++++----------- drivers/ide/ide-tape.c | 3 +-- include/linux/hdreg.h | 3 +++ include/linux/ide.h | 30 ------------------------------ 5 files changed, 15 insertions(+), 45 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 7b94c7aff256..2a37a08ddd57 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -772,9 +772,8 @@ static void idefloppy_retry_pc (ide_drive_t *drive) { idefloppy_pc_t *pc; struct request *rq; - atapi_error_t error; - error.all = HWIF(drive)->INB(IDE_ERROR_REG); + (void)drive->hwif->INB(IDE_ERROR_REG); pc = idefloppy_next_pc_storage(drive); rq = idefloppy_next_rq_storage(drive); idefloppy_create_request_sense_cmd(pc); diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index dc7e539b4d0b..562f5efae9c6 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -562,9 +562,8 @@ static u8 ide_dump_ata_status(ide_drive_t *drive, const char *msg, u8 stat) static u8 ide_dump_atapi_status(ide_drive_t *drive, const char *msg, u8 stat) { unsigned long flags; - atapi_error_t error; + u8 err = 0; - error.all = 0; local_irq_save(flags); printk("%s: %s: status=0x%02x { ", drive->name, msg, stat); if (stat & BUSY_STAT) @@ -580,19 +579,19 @@ static u8 ide_dump_atapi_status(ide_drive_t *drive, const char *msg, u8 stat) } printk("}\n"); if ((stat & (BUSY_STAT|ERR_STAT)) == ERR_STAT) { - error.all = HWIF(drive)->INB(IDE_ERROR_REG); - printk("%s: %s: error=0x%02x { ", drive->name, msg, error.all); - if (error.b.ili) printk("IllegalLengthIndication "); - if (error.b.eom) printk("EndOfMedia "); - if (error.b.abrt) printk("AbortedCommand "); - if (error.b.mcr) printk("MediaChangeRequested "); - if (error.b.sense_key) printk("LastFailedSense=0x%02x ", - error.b.sense_key); + err = drive->hwif->INB(IDE_ERROR_REG); + printk("%s: %s: error=0x%02x { ", drive->name, msg, err); + if (err & ILI_ERR) printk("IllegalLengthIndication "); + if (err & EOM_ERR) printk("EndOfMedia "); + if (err & ABRT_ERR) printk("AbortedCommand "); + if (err & MCR_ERR) printk("MediaChangeRequested "); + if (err & LFS_ERR) printk("LastFailedSense=0x%02x ", + (err & LFS_ERR) >> 4); printk("}\n"); } ide_dump_opcode(drive); local_irq_restore(flags); - return error.all; + return err; } /** diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index c91039505436..2c03f469f06e 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -1808,9 +1808,8 @@ static ide_startstop_t idetape_retry_pc (ide_drive_t *drive) idetape_tape_t *tape = drive->driver_data; idetape_pc_t *pc; struct request *rq; - atapi_error_t error; - error.all = HWIF(drive)->INB(IDE_ERROR_REG); + (void)drive->hwif->INB(IDE_ERROR_REG); pc = idetape_next_pc_storage(drive); rq = idetape_next_rq_storage(drive); idetape_create_request_sense_cmd(pc); diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h index df17bf767d98..0521f1234f15 100644 --- a/include/linux/hdreg.h +++ b/include/linux/hdreg.h @@ -44,7 +44,9 @@ /* Bits for HD_ERROR */ #define MARK_ERR 0x01 /* Bad address mark */ +#define ILI_ERR 0x01 /* Illegal Length Indication (ATAPI) */ #define TRK0_ERR 0x02 /* couldn't find track 0 */ +#define EOM_ERR 0x02 /* End Of Media (ATAPI) */ #define ABRT_ERR 0x04 /* Command aborted */ #define MCR_ERR 0x08 /* media change request */ #define ID_ERR 0x10 /* ID field not found */ @@ -52,6 +54,7 @@ #define ECC_ERR 0x40 /* Uncorrectable ECC error */ #define BBD_ERR 0x80 /* pre-EIDE meaning: block marked bad */ #define ICRC_ERR 0x80 /* new meaning: CRC error during transfer */ +#define LFS_ERR 0xf0 /* Last Failed Sense (ATAPI) */ /* Bits of HD_NSECTOR */ #define CD 0x01 diff --git a/include/linux/ide.h b/include/linux/ide.h index 921cf717f22a..0c1b0aaa2865 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -416,36 +416,6 @@ typedef union { } b; } atapi_ireason_t; -/* - * The ATAPI error register. - * - * ili : Illegal Length Indication - * eom : End Of Media Detected - * abrt : Aborted command - As defined by ATA - * mcr : Media Change Requested - As defined by ATA - * sense_key : Sense key of the last failed packet command - */ -typedef union { - unsigned all :8; - struct { -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned ili :1; - unsigned eom :1; - unsigned abrt :1; - unsigned mcr :1; - unsigned sense_key :4; -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned sense_key :4; - unsigned mcr :1; - unsigned abrt :1; - unsigned eom :1; - unsigned ili :1; -#else -#error "Please fix " -#endif - } b; -} atapi_error_t; - /* * Status returned from various ide_ functions */ -- cgit v1.2.3-59-g8ed1b From e5f9f5a89a01abc2b9c09747452aeb9218d6bffd Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:12 +0100 Subject: ide: remove atapi_feature_t Remove atapi_feature_t. While at it: * replace 'HWIF(drive)' by 'hwif' Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 10 +++++----- drivers/scsi/ide-scsi.c | 11 ++++------- include/linux/ide.h | 27 --------------------------- 3 files changed, 9 insertions(+), 39 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 2a37a08ddd57..95e302790001 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -1019,9 +1019,9 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p { idefloppy_floppy_t *floppy = drive->driver_data; ide_hwif_t *hwif = drive->hwif; - atapi_feature_t feature; atapi_bcount_t bcount; ide_handler_t *pkt_xfer_routine; + u8 dma; if (floppy->failed_pc == NULL && pc->c[0] != IDEFLOPPY_REQUEST_SENSE_CMD) @@ -1064,20 +1064,20 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p if (test_and_clear_bit(PC_DMA_ERROR, &pc->flags)) ide_dma_off(drive); - feature.all = 0; + dma = 0; if (test_bit(PC_DMA_RECOMMENDED, &pc->flags) && drive->using_dma) - feature.b.dma = !hwif->dma_setup(drive); + dma = !hwif->dma_setup(drive); if (IDE_CONTROL_REG) HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG); /* Use PIO/DMA */ - HWIF(drive)->OUTB(feature.all, IDE_FEATURE_REG); + hwif->OUTB(dma, IDE_FEATURE_REG); HWIF(drive)->OUTB(bcount.b.high, IDE_BCOUNTH_REG); HWIF(drive)->OUTB(bcount.b.low, IDE_BCOUNTL_REG); HWIF(drive)->OUTB(drive->select.all, IDE_SELECT_REG); - if (feature.b.dma) { /* Begin DMA, if necessary */ + if (dma) { /* Begin DMA, if necessary */ set_bit(PC_DMA_IN_PROGRESS, &pc->flags); hwif->dma_start(drive); } diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index bd2b56912472..c009f2351346 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -399,7 +399,6 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) struct request *rq = pc->rq; atapi_bcount_t bcount; atapi_ireason_t ireason; - atapi_feature_t feature; unsigned int temp; u8 stat; @@ -424,7 +423,6 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) (void) HWIF(drive)->ide_dma_end(drive); } - feature.all = 0; /* Clear the interrupt */ stat = drive->hwif->INB(IDE_STATUS_REG); @@ -572,18 +570,17 @@ static ide_startstop_t idescsi_issue_pc (ide_drive_t *drive, idescsi_pc_t *pc) { idescsi_scsi_t *scsi = drive_to_idescsi(drive); ide_hwif_t *hwif = drive->hwif; - atapi_feature_t feature; atapi_bcount_t bcount; + u8 dma = 0; scsi->pc=pc; /* Set the current packet command */ pc->actually_transferred=0; /* We haven't transferred any data yet */ pc->current_position=pc->buffer; bcount.all = min(pc->request_transfer, 63 * 1024); /* Request to transfer the entire buffer at once */ - feature.all = 0; if (drive->using_dma && !idescsi_map_sg(drive, pc)) { hwif->sg_mapped = 1; - feature.b.dma = !hwif->dma_setup(drive); + dma = !hwif->dma_setup(drive); hwif->sg_mapped = 0; } @@ -591,11 +588,11 @@ static ide_startstop_t idescsi_issue_pc (ide_drive_t *drive, idescsi_pc_t *pc) if (IDE_CONTROL_REG) HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG); - HWIF(drive)->OUTB(feature.all, IDE_FEATURE_REG); + hwif->OUTB(dma, IDE_FEATURE_REG); HWIF(drive)->OUTB(bcount.b.high, IDE_BCOUNTH_REG); HWIF(drive)->OUTB(bcount.b.low, IDE_BCOUNTL_REG); - if (feature.b.dma) + if (dma) set_bit(PC_DMA_OK, &pc->flags); if (test_bit(IDESCSI_DRQ_INTERRUPT, &scsi->flags)) { diff --git a/include/linux/ide.h b/include/linux/ide.h index 0c1b0aaa2865..a638dde17e77 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -365,33 +365,6 @@ typedef union { } b; } select_t, ata_select_t; -/* - * ATAPI Feature Register - * - * dma : Using DMA or PIO - * reserved321 : Reserved - * reserved654 : Reserved (Tag Type) - * reserved7 : Reserved - */ -typedef union { - unsigned all :8; - struct { -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned dma :1; - unsigned reserved321 :3; - unsigned reserved654 :3; - unsigned reserved7 :1; -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned reserved7 :1; - unsigned reserved654 :3; - unsigned reserved321 :3; - unsigned dma :1; -#else -#error "Please fix " -#endif - } b; -} atapi_feature_t; - /* * ATAPI Interrupt Reason Register. * -- cgit v1.2.3-59-g8ed1b From 790d1239898d4f893112280decd344d90f43ee96 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:12 +0100 Subject: ide: remove ata_nsector_t, ata_data_t and atapi_bcount_t Remove ata_nsector_t, ata_data_t (unused) and atapi_bcount_t. While at it: * replace 'HWIF(drive)' by 'hwif' Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 12 +++++------- drivers/ide/ide-floppy.c | 37 ++++++++++++++++++------------------- drivers/ide/ide-tape.c | 35 +++++++++++++++++++---------------- drivers/scsi/ide-scsi.c | 40 +++++++++++++++++++++++----------------- include/linux/ide.h | 20 -------------------- 5 files changed, 65 insertions(+), 79 deletions(-) diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index ffff96e6ab3e..747dc6023346 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -137,14 +137,12 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, { ide_hwif_t *hwif = HWIF(drive); unsigned int dma = drive->using_dma; + u16 nsectors = (u16)rq->nr_sectors; u8 lba48 = (drive->addressing == 1) ? 1 : 0; u8 command = WIN_NOP; - ata_nsector_t nsectors; ide_task_t task; struct ide_taskfile *tf = &task.tf; - nsectors.all = (u16) rq->nr_sectors; - if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && lba48 && dma) { if (block + rq->nr_sectors > 1ULL << 28) dma = 0; @@ -166,14 +164,14 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, pr_debug("%s: LBA=0x%012llx\n", drive->name, (unsigned long long)block); - tf->hob_nsect = nsectors.b.high; + tf->hob_nsect = (nsectors >> 8) & 0xff; tf->hob_lbal = (u8)(block >> 24); if (sizeof(block) != 4) { tf->hob_lbam = (u8)((u64)block >> 32); tf->hob_lbah = (u8)((u64)block >> 40); } - tf->nsect = nsectors.b.low; + tf->nsect = nsectors & 0xff; tf->lbal = (u8) block; tf->lbam = (u8)(block >> 8); tf->lbah = (u8)(block >> 16); @@ -185,7 +183,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, #endif task.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_OUT_HOB); } else { - tf->nsect = nsectors.b.low; + tf->nsect = nsectors & 0xff; tf->lbal = block; tf->lbam = block >>= 8; tf->lbah = block >>= 8; @@ -200,7 +198,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, pr_debug("%s: CHS=%u/%u/%u\n", drive->name, cyl, head, sect); - tf->nsect = nsectors.b.low; + tf->nsect = nsectors & 0xff; tf->lbal = sect; tf->lbam = cyl; tf->lbah = cyl >> 8; diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 95e302790001..239aebcfc359 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -787,11 +787,12 @@ static void idefloppy_retry_pc (ide_drive_t *drive) static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; - atapi_bcount_t bcount; + ide_hwif_t *hwif = drive->hwif; atapi_ireason_t ireason; idefloppy_pc_t *pc = floppy->pc; struct request *rq = pc->rq; unsigned int temp; + u16 bcount; u8 stat; debug_log(KERN_INFO "ide-floppy: Reached %s interrupt handler\n", @@ -848,8 +849,8 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) } /* Get the number of bytes to transfer */ - bcount.b.high = HWIF(drive)->INB(IDE_BCOUNTH_REG); - bcount.b.low = HWIF(drive)->INB(IDE_BCOUNTL_REG); + bcount = (hwif->INB(IDE_BCOUNTH_REG) << 8) | + hwif->INB(IDE_BCOUNTL_REG); /* on this interrupt */ ireason.all = HWIF(drive)->INB(IDE_IREASON_REG); @@ -867,13 +868,13 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) } if (!test_bit(PC_WRITING, &pc->flags)) { /* Reading - Check that we have enough space */ - temp = pc->actually_transferred + bcount.all; + temp = pc->actually_transferred + bcount; if (temp > pc->request_transfer) { if (temp > pc->buffer_size) { printk(KERN_ERR "ide-floppy: The floppy wants " "to send us more data than expected " "- discarding data\n"); - idefloppy_discard_data(drive,bcount.all); + idefloppy_discard_data(drive, bcount); BUG_ON(HWGROUP(drive)->handler != NULL); ide_set_handler(drive, &idefloppy_pc_intr, @@ -889,23 +890,21 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) if (test_bit(PC_WRITING, &pc->flags)) { if (pc->buffer != NULL) /* Write the current buffer */ - HWIF(drive)->atapi_output_bytes(drive, - pc->current_position, - bcount.all); + hwif->atapi_output_bytes(drive, pc->current_position, + bcount); else - idefloppy_output_buffers(drive, pc, bcount.all); + idefloppy_output_buffers(drive, pc, bcount); } else { if (pc->buffer != NULL) /* Read the current buffer */ - HWIF(drive)->atapi_input_bytes(drive, - pc->current_position, - bcount.all); + hwif->atapi_input_bytes(drive, pc->current_position, + bcount); else - idefloppy_input_buffers(drive, pc, bcount.all); + idefloppy_input_buffers(drive, pc, bcount); } /* Update the current position */ - pc->actually_transferred += bcount.all; - pc->current_position += bcount.all; + pc->actually_transferred += bcount; + pc->current_position += bcount; BUG_ON(HWGROUP(drive)->handler != NULL); ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL); /* And set the interrupt handler again */ @@ -1019,8 +1018,8 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p { idefloppy_floppy_t *floppy = drive->driver_data; ide_hwif_t *hwif = drive->hwif; - atapi_bcount_t bcount; ide_handler_t *pkt_xfer_routine; + u16 bcount; u8 dma; if (floppy->failed_pc == NULL && @@ -1059,7 +1058,7 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p /* We haven't transferred any data yet */ pc->actually_transferred = 0; pc->current_position = pc->buffer; - bcount.all = min(pc->request_transfer, 63 * 1024); + bcount = min(pc->request_transfer, 63 * 1024); if (test_and_clear_bit(PC_DMA_ERROR, &pc->flags)) ide_dma_off(drive); @@ -1073,8 +1072,8 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG); /* Use PIO/DMA */ hwif->OUTB(dma, IDE_FEATURE_REG); - HWIF(drive)->OUTB(bcount.b.high, IDE_BCOUNTH_REG); - HWIF(drive)->OUTB(bcount.b.low, IDE_BCOUNTL_REG); + hwif->OUTB((bcount >> 8) & 0xff, IDE_BCOUNTH_REG); + hwif->OUTB(bcount & 0xff, IDE_BCOUNTL_REG); HWIF(drive)->OUTB(drive->select.all, IDE_SELECT_REG); if (dma) { /* Begin DMA, if necessary */ diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 2c03f469f06e..4c24e185ccbf 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -1847,13 +1847,13 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; idetape_tape_t *tape = drive->driver_data; - atapi_bcount_t bcount; atapi_ireason_t ireason; idetape_pc_t *pc = tape->pc; unsigned int temp; #if SIMULATE_ERRORS static int error_sim_count = 0; #endif + u16 bcount; u8 stat; #if IDETAPE_DEBUG_LOG @@ -1962,8 +1962,8 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) return ide_do_reset(drive); } /* Get the number of bytes to transfer on this interrupt. */ - bcount.b.high = hwif->INB(IDE_BCOUNTH_REG); - bcount.b.low = hwif->INB(IDE_BCOUNTL_REG); + bcount = (hwif->INB(IDE_BCOUNTH_REG) << 8) | + hwif->INB(IDE_BCOUNTL_REG); ireason.all = hwif->INB(IDE_IREASON_REG); @@ -1981,11 +1981,11 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) } if (!test_bit(PC_WRITING, &pc->flags)) { /* Reading - Check that we have enough space */ - temp = pc->actually_transferred + bcount.all; + temp = pc->actually_transferred + bcount; if (temp > pc->request_transfer) { if (temp > pc->buffer_size) { printk(KERN_ERR "ide-tape: The tape wants to send us more data than expected - discarding data\n"); - idetape_discard_data(drive, bcount.all); + idetape_discard_data(drive, bcount); ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL); return ide_started; } @@ -1997,23 +1997,26 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) } if (test_bit(PC_WRITING, &pc->flags)) { if (pc->bh != NULL) - idetape_output_buffers(drive, pc, bcount.all); + idetape_output_buffers(drive, pc, bcount); else /* Write the current buffer */ - HWIF(drive)->atapi_output_bytes(drive, pc->current_position, bcount.all); + hwif->atapi_output_bytes(drive, pc->current_position, + bcount); } else { if (pc->bh != NULL) - idetape_input_buffers(drive, pc, bcount.all); + idetape_input_buffers(drive, pc, bcount); else /* Read the current buffer */ - HWIF(drive)->atapi_input_bytes(drive, pc->current_position, bcount.all); + hwif->atapi_input_bytes(drive, pc->current_position, + bcount); } /* Update the current position */ - pc->actually_transferred += bcount.all; - pc->current_position += bcount.all; + pc->actually_transferred += bcount; + pc->current_position += bcount; #if IDETAPE_DEBUG_LOG if (tape->debug_level >= 2) - printk(KERN_INFO "ide-tape: [cmd %x] transferred %d bytes on that interrupt\n", pc->c[0], bcount.all); + printk(KERN_INFO "ide-tape: [cmd %x] transferred %d bytes " + "on that interrupt\n", pc->c[0], bcount); #endif /* And set the interrupt handler again */ ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL); @@ -2109,8 +2112,8 @@ static ide_startstop_t idetape_issue_packet_command (ide_drive_t *drive, idetape { ide_hwif_t *hwif = drive->hwif; idetape_tape_t *tape = drive->driver_data; - atapi_bcount_t bcount; int dma_ok = 0; + u16 bcount; #if IDETAPE_DEBUG_BUGS if (tape->pc->c[0] == IDETAPE_REQUEST_SENSE_CMD && @@ -2159,7 +2162,7 @@ static ide_startstop_t idetape_issue_packet_command (ide_drive_t *drive, idetape pc->actually_transferred = 0; pc->current_position = pc->buffer; /* Request to transfer the entire buffer at once */ - bcount.all = pc->request_transfer; + bcount = pc->request_transfer; if (test_and_clear_bit(PC_DMA_ERROR, &pc->flags)) { printk(KERN_WARNING "ide-tape: DMA disabled, " @@ -2172,8 +2175,8 @@ static ide_startstop_t idetape_issue_packet_command (ide_drive_t *drive, idetape if (IDE_CONTROL_REG) hwif->OUTB(drive->ctl, IDE_CONTROL_REG); hwif->OUTB(dma_ok ? 1 : 0, IDE_FEATURE_REG); /* Use PIO/DMA */ - hwif->OUTB(bcount.b.high, IDE_BCOUNTH_REG); - hwif->OUTB(bcount.b.low, IDE_BCOUNTL_REG); + hwif->OUTB((bcount >> 8) & 0xff, IDE_BCOUNTH_REG); + hwif->OUTB(bcount & 0xff, IDE_BCOUNTL_REG); hwif->OUTB(drive->select.all, IDE_SELECT_REG); if (dma_ok) /* Will begin DMA later */ set_bit(PC_DMA_IN_PROGRESS, &pc->flags); diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index c009f2351346..77e8a81228fc 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -395,11 +395,12 @@ static int idescsi_expiry(ide_drive_t *drive) static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) { idescsi_scsi_t *scsi = drive_to_idescsi(drive); - idescsi_pc_t *pc=scsi->pc; + ide_hwif_t *hwif = drive->hwif; + idescsi_pc_t *pc = scsi->pc; struct request *rq = pc->rq; - atapi_bcount_t bcount; atapi_ireason_t ireason; unsigned int temp; + u16 bcount; u8 stat; #if IDESCSI_DEBUG_LOG @@ -436,8 +437,8 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) idescsi_end_request (drive, 1, 0); return ide_stopped; } - bcount.b.low = HWIF(drive)->INB(IDE_BCOUNTL_REG); - bcount.b.high = HWIF(drive)->INB(IDE_BCOUNTH_REG); + bcount = (hwif->INB(IDE_BCOUNTH_REG) << 8) | + hwif->INB(IDE_BCOUNTL_REG); ireason.all = HWIF(drive)->INB(IDE_IREASON_REG); if (ireason.b.cod) { @@ -445,7 +446,7 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) return ide_do_reset (drive); } if (ireason.b.io) { - temp = pc->actually_transferred + bcount.all; + temp = pc->actually_transferred + bcount; if (temp > pc->request_transfer) { if (temp > pc->buffer_size) { printk(KERN_ERR "ide-scsi: The scsi wants to " @@ -458,11 +459,13 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) idescsi_input_buffers(drive, pc, temp); else drive->hwif->atapi_input_bytes(drive, pc->current_position, temp); - printk(KERN_ERR "ide-scsi: transferred %d of %d bytes\n", temp, bcount.all); + printk(KERN_ERR "ide-scsi: transferred" + " %d of %d bytes\n", + temp, bcount); } pc->actually_transferred += temp; pc->current_position += temp; - idescsi_discard_data(drive, bcount.all - temp); + idescsi_discard_data(drive, bcount - temp); ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry); return ide_started; } @@ -474,19 +477,21 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) if (ireason.b.io) { clear_bit(PC_WRITING, &pc->flags); if (pc->sg) - idescsi_input_buffers(drive, pc, bcount.all); + idescsi_input_buffers(drive, pc, bcount); else - HWIF(drive)->atapi_input_bytes(drive, pc->current_position, bcount.all); + hwif->atapi_input_bytes(drive, pc->current_position, + bcount); } else { set_bit(PC_WRITING, &pc->flags); if (pc->sg) - idescsi_output_buffers (drive, pc, bcount.all); + idescsi_output_buffers(drive, pc, bcount); else - HWIF(drive)->atapi_output_bytes(drive, pc->current_position, bcount.all); + hwif->atapi_output_bytes(drive, pc->current_position, + bcount); } /* Update the current position */ - pc->actually_transferred += bcount.all; - pc->current_position += bcount.all; + pc->actually_transferred += bcount; + pc->current_position += bcount; /* And set the interrupt handler again */ ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry); @@ -570,13 +575,14 @@ static ide_startstop_t idescsi_issue_pc (ide_drive_t *drive, idescsi_pc_t *pc) { idescsi_scsi_t *scsi = drive_to_idescsi(drive); ide_hwif_t *hwif = drive->hwif; - atapi_bcount_t bcount; + u16 bcount; u8 dma = 0; scsi->pc=pc; /* Set the current packet command */ pc->actually_transferred=0; /* We haven't transferred any data yet */ pc->current_position=pc->buffer; - bcount.all = min(pc->request_transfer, 63 * 1024); /* Request to transfer the entire buffer at once */ + /* Request to transfer the entire buffer at once */ + bcount = min(pc->request_transfer, 63 * 1024); if (drive->using_dma && !idescsi_map_sg(drive, pc)) { hwif->sg_mapped = 1; @@ -589,8 +595,8 @@ static ide_startstop_t idescsi_issue_pc (ide_drive_t *drive, idescsi_pc_t *pc) HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG); hwif->OUTB(dma, IDE_FEATURE_REG); - HWIF(drive)->OUTB(bcount.b.high, IDE_BCOUNTH_REG); - HWIF(drive)->OUTB(bcount.b.low, IDE_BCOUNTL_REG); + hwif->OUTB((bcount >> 8) & 0xff, IDE_BCOUNTH_REG); + hwif->OUTB(bcount & 0xff, IDE_BCOUNTL_REG); if (dma) set_bit(PC_DMA_OK, &pc->flags); diff --git a/include/linux/ide.h b/include/linux/ide.h index a638dde17e77..cf1a5aaebd9e 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -315,26 +315,6 @@ typedef union { } b; } special_t; -/* - * ATA DATA Register Special. - * ATA NSECTOR Count Register(). - * ATAPI Byte Count Register. - */ -typedef union { - unsigned all :16; - struct { -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned low :8; /* LSB */ - unsigned high :8; /* MSB */ -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned high :8; /* MSB */ - unsigned low :8; /* LSB */ -#else -#error "Please fix " -#endif - } b; -} ata_nsector_t, ata_data_t, atapi_bcount_t; - /* * ATA-IDE Select Register, aka Device-Head * -- cgit v1.2.3-59-g8ed1b From 8e7657ae0f56c14882e53ffdae8055c2b1624de1 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:12 +0100 Subject: ide: remove atapi_ireason_t (take 3) Remove atapi_ireason_t. While at it: * replace 'HWIF(drive)' by 'drive->hwif' (or just 'hwif' where possible) v2: * v1 had CD and IO bits reversed in many places. * Use CD and IO defines from . v3: * Fix incorrect "(ireason & IO) == test_bit()". (Noticed by Sergei) Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 25 ++++++++++++------------- drivers/ide/ide-tape.c | 27 +++++++++++++-------------- drivers/scsi/ide-scsi.c | 17 ++++++++--------- include/linux/ide.h | 24 ------------------------ 4 files changed, 33 insertions(+), 60 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 239aebcfc359..830186fdcc74 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -788,12 +788,11 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; ide_hwif_t *hwif = drive->hwif; - atapi_ireason_t ireason; idefloppy_pc_t *pc = floppy->pc; struct request *rq = pc->rq; unsigned int temp; u16 bcount; - u8 stat; + u8 stat, ireason; debug_log(KERN_INFO "ide-floppy: Reached %s interrupt handler\n", __FUNCTION__); @@ -852,18 +851,18 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) bcount = (hwif->INB(IDE_BCOUNTH_REG) << 8) | hwif->INB(IDE_BCOUNTL_REG); /* on this interrupt */ - ireason.all = HWIF(drive)->INB(IDE_IREASON_REG); + ireason = hwif->INB(IDE_IREASON_REG); - if (ireason.b.cod) { + if (ireason & CD) { printk(KERN_ERR "ide-floppy: CoD != 0 in idefloppy_pc_intr\n"); return ide_do_reset(drive); } - if (ireason.b.io == test_bit(PC_WRITING, &pc->flags)) { + if (((ireason & IO) == IO) == test_bit(PC_WRITING, &pc->flags)) { /* Hopefully, we will never get here */ printk(KERN_ERR "ide-floppy: We wanted to %s, ", - ireason.b.io ? "Write":"Read"); + (ireason & IO) ? "Write" : "Read"); printk(KERN_ERR "but the floppy wants us to %s !\n", - ireason.b.io ? "Read":"Write"); + (ireason & IO) ? "Read" : "Write"); return ide_do_reset(drive); } if (!test_bit(PC_WRITING, &pc->flags)) { @@ -920,15 +919,15 @@ static ide_startstop_t idefloppy_transfer_pc (ide_drive_t *drive) { ide_startstop_t startstop; idefloppy_floppy_t *floppy = drive->driver_data; - atapi_ireason_t ireason; + u8 ireason; if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) { printk(KERN_ERR "ide-floppy: Strange, packet command " "initiated yet DRQ isn't asserted\n"); return startstop; } - ireason.all = HWIF(drive)->INB(IDE_IREASON_REG); - if (!ireason.b.cod || ireason.b.io) { + ireason = drive->hwif->INB(IDE_IREASON_REG); + if ((ireason & CD) == 0 || (ireason & IO)) { printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) while " "issuing a packet command\n"); return ide_do_reset(drive); @@ -968,15 +967,15 @@ static ide_startstop_t idefloppy_transfer_pc1 (ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; ide_startstop_t startstop; - atapi_ireason_t ireason; + u8 ireason; if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) { printk(KERN_ERR "ide-floppy: Strange, packet command " "initiated yet DRQ isn't asserted\n"); return startstop; } - ireason.all = HWIF(drive)->INB(IDE_IREASON_REG); - if (!ireason.b.cod || ireason.b.io) { + ireason = drive->hwif->INB(IDE_IREASON_REG); + if ((ireason & CD) == 0 || (ireason & IO)) { printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) " "while issuing a packet command\n"); return ide_do_reset(drive); diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 4c24e185ccbf..3539131f23f4 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -1847,14 +1847,13 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; idetape_tape_t *tape = drive->driver_data; - atapi_ireason_t ireason; idetape_pc_t *pc = tape->pc; unsigned int temp; #if SIMULATE_ERRORS static int error_sim_count = 0; #endif u16 bcount; - u8 stat; + u8 stat, ireason; #if IDETAPE_DEBUG_LOG if (tape->debug_level >= 4) @@ -1965,18 +1964,18 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) bcount = (hwif->INB(IDE_BCOUNTH_REG) << 8) | hwif->INB(IDE_BCOUNTL_REG); - ireason.all = hwif->INB(IDE_IREASON_REG); + ireason = hwif->INB(IDE_IREASON_REG); - if (ireason.b.cod) { + if (ireason & CD) { printk(KERN_ERR "ide-tape: CoD != 0 in idetape_pc_intr\n"); return ide_do_reset(drive); } - if (ireason.b.io == test_bit(PC_WRITING, &pc->flags)) { + if (((ireason & IO) == IO) == test_bit(PC_WRITING, &pc->flags)) { /* Hopefully, we will never get here */ printk(KERN_ERR "ide-tape: We wanted to %s, ", - ireason.b.io ? "Write":"Read"); + (ireason & IO) ? "Write" : "Read"); printk(KERN_ERR "ide-tape: but the tape wants us to %s !\n", - ireason.b.io ? "Read":"Write"); + (ireason & IO) ? "Read" : "Write"); return ide_do_reset(drive); } if (!test_bit(PC_WRITING, &pc->flags)) { @@ -2070,28 +2069,28 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) ide_hwif_t *hwif = drive->hwif; idetape_tape_t *tape = drive->driver_data; idetape_pc_t *pc = tape->pc; - atapi_ireason_t ireason; int retries = 100; ide_startstop_t startstop; + u8 ireason; if (ide_wait_stat(&startstop,drive,DRQ_STAT,BUSY_STAT,WAIT_READY)) { printk(KERN_ERR "ide-tape: Strange, packet command initiated yet DRQ isn't asserted\n"); return startstop; } - ireason.all = hwif->INB(IDE_IREASON_REG); - while (retries-- && (!ireason.b.cod || ireason.b.io)) { + ireason = hwif->INB(IDE_IREASON_REG); + while (retries-- && ((ireason & CD) == 0 || (ireason & IO))) { printk(KERN_ERR "ide-tape: (IO,CoD != (0,1) while issuing " "a packet command, retrying\n"); udelay(100); - ireason.all = hwif->INB(IDE_IREASON_REG); + ireason = hwif->INB(IDE_IREASON_REG); if (retries == 0) { printk(KERN_ERR "ide-tape: (IO,CoD != (0,1) while " "issuing a packet command, ignoring\n"); - ireason.b.cod = 1; - ireason.b.io = 0; + ireason |= CD; + ireason &= ~IO; } } - if (!ireason.b.cod || ireason.b.io) { + if ((ireason & CD) == 0 || (ireason & IO)) { printk(KERN_ERR "ide-tape: (IO,CoD) != (0,1) while issuing " "a packet command\n"); return ide_do_reset(drive); diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 77e8a81228fc..ab7e8642cb88 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -398,10 +398,9 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) ide_hwif_t *hwif = drive->hwif; idescsi_pc_t *pc = scsi->pc; struct request *rq = pc->rq; - atapi_ireason_t ireason; unsigned int temp; u16 bcount; - u8 stat; + u8 stat, ireason; #if IDESCSI_DEBUG_LOG printk (KERN_INFO "ide-scsi: Reached idescsi_pc_intr interrupt handler\n"); @@ -439,13 +438,13 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) } bcount = (hwif->INB(IDE_BCOUNTH_REG) << 8) | hwif->INB(IDE_BCOUNTL_REG); - ireason.all = HWIF(drive)->INB(IDE_IREASON_REG); + ireason = hwif->INB(IDE_IREASON_REG); - if (ireason.b.cod) { + if (ireason & CD) { printk(KERN_ERR "ide-scsi: CoD != 0 in idescsi_pc_intr\n"); return ide_do_reset (drive); } - if (ireason.b.io) { + if (ireason & IO) { temp = pc->actually_transferred + bcount; if (temp > pc->request_transfer) { if (temp > pc->buffer_size) { @@ -474,7 +473,7 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) #endif /* IDESCSI_DEBUG_LOG */ } } - if (ireason.b.io) { + if (ireason & IO) { clear_bit(PC_WRITING, &pc->flags); if (pc->sg) idescsi_input_buffers(drive, pc, bcount); @@ -503,16 +502,16 @@ static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive) ide_hwif_t *hwif = drive->hwif; idescsi_scsi_t *scsi = drive_to_idescsi(drive); idescsi_pc_t *pc = scsi->pc; - atapi_ireason_t ireason; ide_startstop_t startstop; + u8 ireason; if (ide_wait_stat(&startstop,drive,DRQ_STAT,BUSY_STAT,WAIT_READY)) { printk(KERN_ERR "ide-scsi: Strange, packet command " "initiated yet DRQ isn't asserted\n"); return startstop; } - ireason.all = HWIF(drive)->INB(IDE_IREASON_REG); - if (!ireason.b.cod || ireason.b.io) { + ireason = hwif->INB(IDE_IREASON_REG); + if ((ireason & CD) == 0 || (ireason & IO)) { printk(KERN_ERR "ide-scsi: (IO,CoD) != (0,1) while " "issuing a packet command\n"); return ide_do_reset (drive); diff --git a/include/linux/ide.h b/include/linux/ide.h index cf1a5aaebd9e..790ffa7f6949 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -345,30 +345,6 @@ typedef union { } b; } select_t, ata_select_t; -/* - * ATAPI Interrupt Reason Register. - * - * cod : Information transferred is command (1) or data (0) - * io : The device requests us to read (1) or write (0) - * reserved : Reserved - */ -typedef union { - unsigned all :8; - struct { -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned cod :1; - unsigned io :1; - unsigned reserved :6; -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned reserved :6; - unsigned io :1; - unsigned cod :1; -#else -#error "Please fix " -#endif - } b; -} atapi_ireason_t; - /* * Status returned from various ide_ functions */ -- cgit v1.2.3-59-g8ed1b From 3a6a3549afe7dfe212b6384106bec957bb393f3a Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:13 +0100 Subject: ide-cd: fix register loading order in cdrom_start_packet_command() Load IDE_CONTROL_REG before other registers in cdrom_start_packet_command(). It shouldn't affect anything (just a usual paranoia to separate changes which change the way in which hardware is accessed from code cleanups). While at it move misplaced FIXME comment in the right place. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index c7d77f0ad892..855a23c1c815 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -917,19 +917,19 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, if (ide_wait_stat(&startstop, drive, 0, BUSY_STAT, WAIT_READY)) return startstop; + /* FIXME: for Virtual DMA we must check harder */ if (info->dma) info->dma = !hwif->dma_setup(drive); /* Set up the controller registers. */ - /* FIXME: for Virtual DMA we must check harder */ + if (IDE_CONTROL_REG) + HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG); HWIF(drive)->OUTB(info->dma, IDE_FEATURE_REG); HWIF(drive)->OUTB(0, IDE_IREASON_REG); HWIF(drive)->OUTB(0, IDE_SECTOR_REG); HWIF(drive)->OUTB(xferlen & 0xff, IDE_BCOUNTL_REG); HWIF(drive)->OUTB(xferlen >> 8 , IDE_BCOUNTH_REG); - if (IDE_CONTROL_REG) - HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG); if (CDROM_CONFIG_FLAGS (drive)->drq_interrupt) { /* waiting for CDB interrupt, not DMA yet. */ -- cgit v1.2.3-59-g8ed1b From 932aead6d21b631b2058255981824008a6eae32e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:13 +0100 Subject: ide-{floppy,tape,scsi}: fix register loading order when issuing packet command Load IDE_BCOUNTL_REG before IDE_BCOUNTH_REG when issuing packet command. It shouldn't affect anything (just a usual paranoia to separate changes which change the way in which hardware is accessed from code cleanups). Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 2 +- drivers/ide/ide-tape.c | 2 +- drivers/scsi/ide-scsi.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 830186fdcc74..d4fd064cc76c 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -1071,8 +1071,8 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG); /* Use PIO/DMA */ hwif->OUTB(dma, IDE_FEATURE_REG); - hwif->OUTB((bcount >> 8) & 0xff, IDE_BCOUNTH_REG); hwif->OUTB(bcount & 0xff, IDE_BCOUNTL_REG); + hwif->OUTB((bcount >> 8) & 0xff, IDE_BCOUNTH_REG); HWIF(drive)->OUTB(drive->select.all, IDE_SELECT_REG); if (dma) { /* Begin DMA, if necessary */ diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 3539131f23f4..d1f2446739a4 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -2174,8 +2174,8 @@ static ide_startstop_t idetape_issue_packet_command (ide_drive_t *drive, idetape if (IDE_CONTROL_REG) hwif->OUTB(drive->ctl, IDE_CONTROL_REG); hwif->OUTB(dma_ok ? 1 : 0, IDE_FEATURE_REG); /* Use PIO/DMA */ - hwif->OUTB((bcount >> 8) & 0xff, IDE_BCOUNTH_REG); hwif->OUTB(bcount & 0xff, IDE_BCOUNTL_REG); + hwif->OUTB((bcount >> 8) & 0xff, IDE_BCOUNTH_REG); hwif->OUTB(drive->select.all, IDE_SELECT_REG); if (dma_ok) /* Will begin DMA later */ set_bit(PC_DMA_IN_PROGRESS, &pc->flags); diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index ab7e8642cb88..76f0ccd2968b 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -594,8 +594,8 @@ static ide_startstop_t idescsi_issue_pc (ide_drive_t *drive, idescsi_pc_t *pc) HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG); hwif->OUTB(dma, IDE_FEATURE_REG); - hwif->OUTB((bcount >> 8) & 0xff, IDE_BCOUNTH_REG); hwif->OUTB(bcount & 0xff, IDE_BCOUNTL_REG); + hwif->OUTB((bcount >> 8) & 0xff, IDE_BCOUNTH_REG); if (dma) set_bit(PC_DMA_OK, &pc->flags); -- cgit v1.2.3-59-g8ed1b From 2fc573881957337c4ea1c84b92d2f27d076cad57 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:13 +0100 Subject: ide: add ide_pktcmd_tf_load() helper Add ide_pktcmd_tf_load() helper and convert ATAPI device drivers to use it. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 10 ++-------- drivers/ide/ide-floppy.c | 9 ++------- drivers/ide/ide-io.c | 16 ++++++++++++++++ drivers/ide/ide-tape.c | 9 +++------ drivers/scsi/ide-scsi.c | 6 +----- include/linux/ide.h | 2 ++ 6 files changed, 26 insertions(+), 26 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 855a23c1c815..44b033ec0ab0 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -922,14 +922,8 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, info->dma = !hwif->dma_setup(drive); /* Set up the controller registers. */ - if (IDE_CONTROL_REG) - HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG); - HWIF(drive)->OUTB(info->dma, IDE_FEATURE_REG); - HWIF(drive)->OUTB(0, IDE_IREASON_REG); - HWIF(drive)->OUTB(0, IDE_SECTOR_REG); - - HWIF(drive)->OUTB(xferlen & 0xff, IDE_BCOUNTL_REG); - HWIF(drive)->OUTB(xferlen >> 8 , IDE_BCOUNTH_REG); + ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL | + IDE_TFLAG_NO_SELECT_MASK, xferlen, info->dma); if (CDROM_CONFIG_FLAGS (drive)->drq_interrupt) { /* waiting for CDB interrupt, not DMA yet. */ diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index d4fd064cc76c..ff8232ef9659 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -1067,13 +1067,8 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p if (test_bit(PC_DMA_RECOMMENDED, &pc->flags) && drive->using_dma) dma = !hwif->dma_setup(drive); - if (IDE_CONTROL_REG) - HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG); - /* Use PIO/DMA */ - hwif->OUTB(dma, IDE_FEATURE_REG); - hwif->OUTB(bcount & 0xff, IDE_BCOUNTL_REG); - hwif->OUTB((bcount >> 8) & 0xff, IDE_BCOUNTH_REG); - HWIF(drive)->OUTB(drive->select.all, IDE_SELECT_REG); + ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK | + IDE_TFLAG_OUT_DEVICE, bcount, dma); if (dma) { /* Begin DMA, if necessary */ set_bit(PC_DMA_IN_PROGRESS, &pc->flags); diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index d36df77c7519..1ed7a8627cca 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -1734,3 +1734,19 @@ int ide_do_drive_cmd (ide_drive_t *drive, struct request *rq, ide_action_t actio } EXPORT_SYMBOL(ide_do_drive_cmd); + +void ide_pktcmd_tf_load(ide_drive_t *drive, u32 tf_flags, u16 bcount, u8 dma) +{ + ide_task_t task; + + memset(&task, 0, sizeof(task)); + task.tf_flags = IDE_TFLAG_OUT_LBAH | IDE_TFLAG_OUT_LBAM | + IDE_TFLAG_OUT_FEATURE | tf_flags; + task.tf.feature = dma; /* Use PIO/DMA */ + task.tf.lbam = bcount & 0xff; + task.tf.lbah = (bcount >> 8) & 0xff; + + ide_tf_load(drive, &task); +} + +EXPORT_SYMBOL_GPL(ide_pktcmd_tf_load); diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index d1f2446739a4..3cbca3f4628a 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -2171,12 +2171,9 @@ static ide_startstop_t idetape_issue_packet_command (ide_drive_t *drive, idetape if (test_bit(PC_DMA_RECOMMENDED, &pc->flags) && drive->using_dma) dma_ok = !hwif->dma_setup(drive); - if (IDE_CONTROL_REG) - hwif->OUTB(drive->ctl, IDE_CONTROL_REG); - hwif->OUTB(dma_ok ? 1 : 0, IDE_FEATURE_REG); /* Use PIO/DMA */ - hwif->OUTB(bcount & 0xff, IDE_BCOUNTL_REG); - hwif->OUTB((bcount >> 8) & 0xff, IDE_BCOUNTH_REG); - hwif->OUTB(drive->select.all, IDE_SELECT_REG); + ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK | + IDE_TFLAG_OUT_DEVICE, bcount, dma_ok); + if (dma_ok) /* Will begin DMA later */ set_bit(PC_DMA_IN_PROGRESS, &pc->flags); if (test_bit(IDETAPE_DRQ_INTERRUPT, &tape->flags)) { diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 76f0ccd2968b..02e91893064d 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -590,12 +590,8 @@ static ide_startstop_t idescsi_issue_pc (ide_drive_t *drive, idescsi_pc_t *pc) } SELECT_DRIVE(drive); - if (IDE_CONTROL_REG) - HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG); - hwif->OUTB(dma, IDE_FEATURE_REG); - hwif->OUTB(bcount & 0xff, IDE_BCOUNTL_REG); - hwif->OUTB((bcount >> 8) & 0xff, IDE_BCOUNTH_REG); + ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK, bcount, dma); if (dma) set_bit(PC_DMA_OK, &pc->flags); diff --git a/include/linux/ide.h b/include/linux/ide.h index 790ffa7f6949..20969eb1789a 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -968,6 +968,8 @@ extern void QUIRK_LIST(ide_drive_t *); extern int drive_is_ready(ide_drive_t *); +void ide_pktcmd_tf_load(ide_drive_t *, u32, u16, u8); + /* * taskfile io for disks for now...and builds request from ide_ioctl */ -- cgit v1.2.3-59-g8ed1b From cd3dbc99da337f2130f3cb2691fbb65c8bf22337 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:13 +0100 Subject: ide: remove QUIRK_LIST() Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-iops.c | 6 ------ drivers/ide/ide-probe.c | 5 ++++- include/linux/ide.h | 1 - 3 files changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 617888048eed..b6983b7b3b6c 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -189,12 +189,6 @@ void SELECT_MASK (ide_drive_t *drive, int mask) HWIF(drive)->maskproc(drive, mask); } -void QUIRK_LIST (ide_drive_t *drive) -{ - if (HWIF(drive)->quirkproc) - drive->quirk_list = HWIF(drive)->quirkproc(drive); -} - /* * Some localbus EIDE interfaces require a special access sequence * when using 32-bit I/O instructions to transfer data. We call this diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 8e5d8dd315af..33e62d28465d 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -234,7 +234,10 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd) drive->media = ide_disk; printk("%s DISK drive\n", (id->config == 0x848a) ? "CFA" : "ATA" ); - QUIRK_LIST(drive); + + if (hwif->quirkproc) + drive->quirk_list = hwif->quirkproc(drive); + return; err_misc: diff --git a/include/linux/ide.h b/include/linux/ide.h index 20969eb1789a..7a144c9ee098 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -964,7 +964,6 @@ extern u32 ide_read_24(ide_drive_t *); extern void SELECT_DRIVE(ide_drive_t *); extern void SELECT_INTERRUPT(ide_drive_t *); extern void SELECT_MASK(ide_drive_t *, int); -extern void QUIRK_LIST(ide_drive_t *); extern int drive_is_ready(ide_drive_t *); -- cgit v1.2.3-59-g8ed1b From f919790f8c929ab1b392ad1a0c2e1b53337b5071 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:13 +0100 Subject: ide: remove SELECT_INTERRUPT() Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 5 ++++- drivers/ide/ide-iops.c | 8 -------- include/linux/ide.h | 1 - 3 files changed, 4 insertions(+), 10 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 1ed7a8627cca..6b70ab9566d9 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -1201,7 +1201,10 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq) hwif != hwgroup->hwif && hwif->io_ports[IDE_CONTROL_OFFSET]) { /* set nIEN for previous hwif */ - SELECT_INTERRUPT(drive); + if (hwif->intrproc) + hwif->intrproc(drive); + else + hwif->OUTB(drive->ctl | 2, IDE_CONTROL_REG); } hwgroup->hwif = hwif; hwgroup->drive = drive; diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index b6983b7b3b6c..106454211cb8 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -175,14 +175,6 @@ void SELECT_DRIVE (ide_drive_t *drive) EXPORT_SYMBOL(SELECT_DRIVE); -void SELECT_INTERRUPT (ide_drive_t *drive) -{ - if (HWIF(drive)->intrproc) - HWIF(drive)->intrproc(drive); - else - HWIF(drive)->OUTB(drive->ctl|2, IDE_CONTROL_REG); -} - void SELECT_MASK (ide_drive_t *drive, int mask) { if (HWIF(drive)->maskproc) diff --git a/include/linux/ide.h b/include/linux/ide.h index 7a144c9ee098..e80351878b8b 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -962,7 +962,6 @@ void ide_tf_load(ide_drive_t *, ide_task_t *); extern u32 ide_read_24(ide_drive_t *); extern void SELECT_DRIVE(ide_drive_t *); -extern void SELECT_INTERRUPT(ide_drive_t *); extern void SELECT_MASK(ide_drive_t *, int); extern int drive_is_ready(ide_drive_t *); -- cgit v1.2.3-59-g8ed1b From 7299a3918442dc9a5abb71b9f65b1dd17637c8c0 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:14 +0100 Subject: ide: remove hwif->intrproc Given that: * hpt366.c::hpt3xx_intrproc() is the only user of hwif->intrproc * hpt366.c::hpt3xx_quirkproc() sets drive->quirk_list to 1 for quirky drives which is a value unique to hpt366 host driver we can remove hwif->intproc and just check for drive->quirk_list == 1 in ide_do_request(). Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 9 +++++---- drivers/ide/ide.c | 1 - drivers/ide/pci/hpt366.c | 10 ---------- drivers/ide/pci/sgiioc4.c | 1 - include/linux/ide.h | 2 -- 5 files changed, 5 insertions(+), 18 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 6b70ab9566d9..6ee7458d34ed 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -1200,10 +1200,11 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq) if (hwgroup->hwif->sharing_irq && hwif != hwgroup->hwif && hwif->io_ports[IDE_CONTROL_OFFSET]) { - /* set nIEN for previous hwif */ - if (hwif->intrproc) - hwif->intrproc(drive); - else + /* + * set nIEN for previous hwif, drives in the + * quirk_list may not like intr setups/cleanups + */ + if (drive->quirk_list != 1) hwif->OUTB(drive->ctl | 2, IDE_CONTROL_REG); } hwgroup->hwif = hwif; diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 9ab5458fe950..4acd87e92cca 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -424,7 +424,6 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif) hwif->reset_poll = tmp_hwif->reset_poll; hwif->pre_reset = tmp_hwif->pre_reset; hwif->resetproc = tmp_hwif->resetproc; - hwif->intrproc = tmp_hwif->intrproc; hwif->maskproc = tmp_hwif->maskproc; hwif->quirkproc = tmp_hwif->quirkproc; hwif->busproc = tmp_hwif->busproc; diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index d3826a66834d..24d645751e0f 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -736,15 +736,6 @@ static int hpt3xx_quirkproc(ide_drive_t *drive) return 0; } -static void hpt3xx_intrproc(ide_drive_t *drive) -{ - if (drive->quirk_list) - return; - - /* drives in the quirk_list may not like intr setups/cleanups */ - outb(drive->ctl | 2, IDE_CONTROL_REG); -} - static void hpt3xx_maskproc(ide_drive_t *drive, int mask) { ide_hwif_t *hwif = HWIF(drive); @@ -1298,7 +1289,6 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) hwif->set_dma_mode = &hpt3xx_set_mode; hwif->quirkproc = &hpt3xx_quirkproc; - hwif->intrproc = &hpt3xx_intrproc; hwif->maskproc = &hpt3xx_maskproc; hwif->busproc = &hpt3xx_busproc; diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index de820aa58cd0..7e9dade5648d 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -582,7 +582,6 @@ ide_init_sgiioc4(ide_hwif_t * hwif) hwif->pre_reset = NULL; /* No HBA specific pre_set needed */ hwif->resetproc = &sgiioc4_resetproc;/* Reset DMA engine, clear interrupts */ - hwif->intrproc = NULL; /* Enable or Disable interrupt from drive */ hwif->maskproc = &sgiioc4_maskproc; /* Mask on/off NIEN register */ hwif->quirkproc = NULL; hwif->busproc = NULL; diff --git a/include/linux/ide.h b/include/linux/ide.h index e80351878b8b..90f83b65eb8f 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -524,8 +524,6 @@ typedef struct hwif_s { void (*pre_reset)(ide_drive_t *); /* routine to reset controller after a disk reset */ void (*resetproc)(ide_drive_t *); - /* special interrupt handling for shared pci interrupts */ - void (*intrproc)(ide_drive_t *); /* special host masking for drive selection */ void (*maskproc)(ide_drive_t *, int); /* check host's drive quirk list */ -- cgit v1.2.3-59-g8ed1b From ac026ff254b32915bb14ba97a23b4019d137f181 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:14 +0100 Subject: ide: remove 'command_type' field from ide_task_t * Add 'data_buf' and 'nsect' variables in ide_taskfile_ioctl() to cache data buffer pointer and number of sectors to transfer (this allows us to have only one ide_diag_taskfile() call). * Add IDE_TFLAG_WRITE taskfile flag and use it to check whether the REQ_RW request flag should be set. * Move ->command_type handling from ide_diag_taskfile() to ide_taskfile_ioctl() and use ->req_cmd instead of ->command_type. * Add 'nsect' parameter to ide_raw_taskfile(). * Merge ide_diag_taskfile() into ide_raw_taskfile(). * Initialize ->data_phase explicitly in idedisk_prepare_flush(), ide_start_power_step() and ide_disk_special(). * Remove no longer needed 'command_type' field from ide_task_t. * Add #ifndef/#endif __KERNEL__ to around no longer used by kernel IDE_DRIVE_TASK_* and TASKFILE_* defines. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 15 ++++---- drivers/ide/ide-io.c | 8 ++--- drivers/ide/ide-taskfile.c | 89 +++++++++++++++++++++++----------------------- include/linux/hdreg.h | 13 +++---- include/linux/ide.h | 5 ++- 5 files changed, 64 insertions(+), 66 deletions(-) diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 747dc6023346..d9a4fe27685d 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -516,12 +516,11 @@ static int get_smart_data(ide_drive_t *drive, u8 *buf, u8 sub_cmd) tf->lbam = SMART_LCYL_PASS; tf->lbah = SMART_HCYL_PASS; tf->command = WIN_SMART; - args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; - args.command_type = IDE_DRIVE_TASK_IN; - args.data_phase = TASKFILE_IN; - args.handler = &task_in_intr; + args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; + args.data_phase = TASKFILE_IN; + args.handler = task_in_intr; (void) smart_enable(drive); - return ide_raw_taskfile(drive, &args, buf); + return ide_raw_taskfile(drive, &args, buf, 1); } static int proc_idedisk_read_cache @@ -607,9 +606,9 @@ static void idedisk_prepare_flush(struct request_queue *q, struct request *rq) task.tf.command = WIN_FLUSH_CACHE_EXT; else task.tf.command = WIN_FLUSH_CACHE; - task.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; - task.command_type = IDE_DRIVE_TASK_NO_DATA; - task.handler = task_no_data_intr; + task.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; + task.data_phase = TASKFILE_NO_DATA; + task.handler = task_no_data_intr; rq->cmd_type = REQ_TYPE_ATA_TASKFILE; rq->cmd_flags |= REQ_SOFTBARRIER; diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 6ee7458d34ed..f4f7e3db10ac 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -232,9 +232,9 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * return ide_stopped; out_do_tf: - args->tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; - args->command_type = IDE_DRIVE_TASK_NO_DATA; - args->handler = task_no_data_intr; + args->tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; + args->data_phase = TASKFILE_NO_DATA; + args->handler = task_no_data_intr; return do_rw_taskfile(drive, args); } @@ -672,7 +672,7 @@ static ide_startstop_t ide_disk_special(ide_drive_t *drive) ide_task_t args; memset(&args, 0, sizeof(ide_task_t)); - args.command_type = IDE_DRIVE_TASK_NO_DATA; + args.data_phase = TASKFILE_NO_DATA; if (s->b.set_geometry) { s->b.set_geometry = 0; diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 7c8e9802898a..ff28449bbcaf 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -126,11 +126,10 @@ int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf) args.tf.command = WIN_IDENTIFY; else args.tf.command = WIN_PIDENTIFY; - args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; - args.command_type = IDE_DRIVE_TASK_IN; - args.data_phase = TASKFILE_IN; - args.handler = &task_in_intr; - return ide_raw_taskfile(drive, &args, buf); + args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; + args.data_phase = TASKFILE_IN; + args.handler = task_in_intr; + return ide_raw_taskfile(drive, &args, buf, 1); } static int inline task_dma_ok(ide_task_t *task) @@ -499,7 +498,7 @@ ide_startstop_t pre_task_out_intr (ide_drive_t *drive, struct request *rq) } EXPORT_SYMBOL(pre_task_out_intr); -static int ide_diag_taskfile(ide_drive_t *drive, ide_task_t *args, unsigned long data_size, u8 *buf) +int ide_raw_taskfile(ide_drive_t *drive, ide_task_t *task, u8 *buf, u16 nsect) { struct request rq; @@ -514,44 +513,26 @@ static int ide_diag_taskfile(ide_drive_t *drive, ide_task_t *args, unsigned long * if we would find a solution to transfer any size. * To support special commands like READ LONG. */ - if (args->command_type != IDE_DRIVE_TASK_NO_DATA) { - if (data_size == 0) - rq.nr_sectors = (args->tf.hob_nsect << 8) | args->tf.nsect; - else - rq.nr_sectors = data_size / SECTOR_SIZE; - - if (!rq.nr_sectors) { - printk(KERN_ERR "%s: in/out command without data\n", - drive->name); - return -EFAULT; - } + rq.hard_nr_sectors = rq.nr_sectors = nsect; + rq.hard_cur_sectors = rq.current_nr_sectors = nsect; - rq.hard_nr_sectors = rq.nr_sectors; - rq.hard_cur_sectors = rq.current_nr_sectors = rq.nr_sectors; + if (task->tf_flags & IDE_TFLAG_WRITE) + rq.cmd_flags |= REQ_RW; - if (args->command_type == IDE_DRIVE_TASK_RAW_WRITE) - rq.cmd_flags |= REQ_RW; - } + rq.special = task; + task->rq = &rq; - rq.special = args; - args->rq = &rq; return ide_do_drive_cmd(drive, &rq, ide_wait); } -int ide_raw_taskfile (ide_drive_t *drive, ide_task_t *args, u8 *buf) -{ - return ide_diag_taskfile(drive, args, 0, buf); -} - EXPORT_SYMBOL(ide_raw_taskfile); int ide_no_data_taskfile(ide_drive_t *drive, ide_task_t *task) { - task->command_type = IDE_DRIVE_TASK_NO_DATA; - task->data_phase = TASKFILE_NO_DATA; - task->handler = task_no_data_intr; + task->data_phase = TASKFILE_NO_DATA; + task->handler = task_no_data_intr; - return ide_raw_taskfile(drive, task, NULL); + return ide_raw_taskfile(drive, task, NULL, 0); } EXPORT_SYMBOL_GPL(ide_no_data_taskfile); @@ -562,10 +543,12 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) ide_task_t args; u8 *outbuf = NULL; u8 *inbuf = NULL; + u8 *data_buf = NULL; int err = 0; int tasksize = sizeof(struct ide_task_request_s); unsigned int taskin = 0; unsigned int taskout = 0; + u16 nsect = 0; u8 io_32bit = drive->io_32bit; char __user *buf = (char __user *)arg; @@ -618,7 +601,6 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) memcpy(&args.tf_array[6], req_task->io_ports, HDIO_DRIVE_TASK_HDR_SIZE); args.tf_in_flags = req_task->in_flags; args.data_phase = req_task->data_phase; - args.command_type = req_task->req_cmd; args.tf_flags = IDE_TFLAG_OUT_DEVICE; if (drive->addressing == 1) @@ -657,14 +639,6 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) drive->io_32bit = 0; switch(req_task->data_phase) { - case TASKFILE_OUT_DMAQ: - case TASKFILE_OUT_DMA: - err = ide_diag_taskfile(drive, &args, taskout, outbuf); - break; - case TASKFILE_IN_DMAQ: - case TASKFILE_IN_DMA: - err = ide_diag_taskfile(drive, &args, taskin, inbuf); - break; case TASKFILE_MULTI_OUT: if (!drive->mult_count) { /* (hs): give up if multcount is not set */ @@ -678,7 +652,11 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) case TASKFILE_OUT: args.prehandler = &pre_task_out_intr; args.handler = &task_out_intr; - err = ide_diag_taskfile(drive, &args, taskout, outbuf); + /* fall through */ + case TASKFILE_OUT_DMAQ: + case TASKFILE_OUT_DMA: + nsect = taskout / SECTOR_SIZE; + data_buf = outbuf; break; case TASKFILE_MULTI_IN: if (!drive->mult_count) { @@ -692,17 +670,38 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) /* fall through */ case TASKFILE_IN: args.handler = &task_in_intr; - err = ide_diag_taskfile(drive, &args, taskin, inbuf); + /* fall through */ + case TASKFILE_IN_DMAQ: + case TASKFILE_IN_DMA: + nsect = taskin / SECTOR_SIZE; + data_buf = inbuf; break; case TASKFILE_NO_DATA: args.handler = &task_no_data_intr; - err = ide_diag_taskfile(drive, &args, 0, NULL); break; default: err = -EFAULT; goto abort; } + if (req_task->req_cmd == IDE_DRIVE_TASK_NO_DATA) + nsect = 0; + else if (!nsect) { + nsect = (args.tf.hob_nsect << 8) | args.tf.nsect; + + if (!nsect) { + printk(KERN_ERR "%s: in/out command without data\n", + drive->name); + err = -EFAULT; + goto abort; + } + } + + if (req_task->req_cmd == IDE_DRIVE_TASK_RAW_WRITE) + args.tf_flags |= IDE_TFLAG_WRITE; + + err = ide_raw_taskfile(drive, &args, data_buf, nsect); + memcpy(req_task->hob_ports, &args.tf_array[0], HDIO_DRIVE_HOB_HDR_SIZE - 2); memcpy(req_task->io_ports, &args.tf_array[6], HDIO_DRIVE_TASK_HDR_SIZE); req_task->in_flags = args.tf_in_flags; diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h index 0521f1234f15..ff43f8d6b5b3 100644 --- a/include/linux/hdreg.h +++ b/include/linux/hdreg.h @@ -73,13 +73,13 @@ #define HDIO_DRIVE_HOB_HDR_SIZE (8 * sizeof(__u8)) #define HDIO_DRIVE_TASK_HDR_SIZE (8 * sizeof(__u8)) -#define IDE_DRIVE_TASK_INVALID -1 #define IDE_DRIVE_TASK_NO_DATA 0 +#ifndef __KERNEL__ +#define IDE_DRIVE_TASK_INVALID -1 #define IDE_DRIVE_TASK_SET_XFER 1 - #define IDE_DRIVE_TASK_IN 2 - #define IDE_DRIVE_TASK_OUT 3 +#endif #define IDE_DRIVE_TASK_RAW_WRITE 4 /* @@ -166,9 +166,6 @@ typedef struct hd_drive_hob_hdr { } hob_struct_t; #endif -#define TASKFILE_INVALID 0x7fff -#define TASKFILE_48 0x8000 - #define TASKFILE_NO_DATA 0x0000 #define TASKFILE_IN 0x0001 @@ -183,12 +180,16 @@ typedef struct hd_drive_hob_hdr { #define TASKFILE_IN_DMAQ 0x0080 #define TASKFILE_OUT_DMAQ 0x0100 +#ifndef __KERNEL__ #define TASKFILE_P_IN 0x0200 #define TASKFILE_P_OUT 0x0400 #define TASKFILE_P_IN_DMA 0x0800 #define TASKFILE_P_OUT_DMA 0x1000 #define TASKFILE_P_IN_DMAQ 0x2000 #define TASKFILE_P_OUT_DMAQ 0x4000 +#define TASKFILE_48 0x8000 +#define TASKFILE_INVALID 0x7fff +#endif /* ATA/ATAPI Commands pre T13 Spec */ #define WIN_NOP 0x00 diff --git a/include/linux/ide.h b/include/linux/ide.h index 90f83b65eb8f..7485fc705ca4 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -909,6 +909,7 @@ enum { IDE_TFLAG_OUT_LBAM | IDE_TFLAG_OUT_LBAH, IDE_TFLAG_OUT_DEVICE = (1 << 14), + IDE_TFLAG_WRITE = (1 << 15), }; struct ide_taskfile { @@ -948,7 +949,6 @@ typedef struct ide_task_s { u16 tf_flags; ide_reg_valid_t tf_in_flags; int data_phase; - int command_type; ide_pre_handler_t *prehandler; ide_handler_t *handler; struct request *rq; /* copy of request */ @@ -983,8 +983,7 @@ extern ide_startstop_t task_no_data_intr(ide_drive_t *); extern ide_startstop_t task_in_intr(ide_drive_t *); extern ide_startstop_t pre_task_out_intr(ide_drive_t *, struct request *); -extern int ide_raw_taskfile(ide_drive_t *, ide_task_t *, u8 *); - +int ide_raw_taskfile(ide_drive_t *, ide_task_t *, u8 *, u16); int ide_no_data_taskfile(ide_drive_t *, ide_task_t *); int ide_taskfile_ioctl(ide_drive_t *, unsigned int, unsigned long); -- cgit v1.2.3-59-g8ed1b From 866e2ec9ce525de0e7c10d02ead8d85af27adffd Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:14 +0100 Subject: ide: remove 'tf_in_flags' field from ide_task_t * Add IDE_TFLAG_IN_DATA taskfile flag to indicate the need of reading IDE_DATA_REG in ide_end_drive_cmd(). Set the new flag in ide_taskfile_ioctl() if ->in_flags.b.data is set. * Add IDE_TFLAG_FLAGGED_SET_IN_FLAGS taskfile flag to indicate the need of modifying ->in_flags in ide_taskfile_ioctl(). Set the new flag in flagged_taskfile() and move the code modifying ->tf_in_flags to ide_taskfile_ioctl(). While at it remove the bogus comment: ->tf_in_flags (except .b.data) have no effect on selection of registers to read. * Remove no longer needed 'tf_in_flags' field from ide_task_t. As the result we finally have the internals of HDIO_DRIVE_TASKFILE ioctl separated from the core IDE code. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 2 +- drivers/ide/ide-taskfile.c | 29 +++++++++++++---------------- include/linux/ide.h | 5 +++-- 3 files changed, 17 insertions(+), 19 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index f4f7e3db10ac..1112d8b049b9 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -340,7 +340,7 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err) if (args) { struct ide_taskfile *tf = &args->tf; - if (args->tf_in_flags.b.data) { + if (args->tf_flags & IDE_TFLAG_IN_DATA) { u16 data = hwif->INW(IDE_DATA_REG); tf->data = data & 0xff; diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index ff28449bbcaf..03c4a0c55bf4 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -599,8 +599,8 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) memcpy(&args.tf_array[0], req_task->hob_ports, HDIO_DRIVE_HOB_HDR_SIZE - 2); memcpy(&args.tf_array[6], req_task->io_ports, HDIO_DRIVE_TASK_HDR_SIZE); - args.tf_in_flags = req_task->in_flags; - args.data_phase = req_task->data_phase; + + args.data_phase = req_task->data_phase; args.tf_flags = IDE_TFLAG_OUT_DEVICE; if (drive->addressing == 1) @@ -637,6 +637,9 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) args.tf_flags |= IDE_TFLAG_OUT_HOB; } + if (req_task->in_flags.b.data) + args.tf_flags |= IDE_TFLAG_IN_DATA; + drive->io_32bit = 0; switch(req_task->data_phase) { case TASKFILE_MULTI_OUT: @@ -704,7 +707,13 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) memcpy(req_task->hob_ports, &args.tf_array[0], HDIO_DRIVE_HOB_HDR_SIZE - 2); memcpy(req_task->io_ports, &args.tf_array[6], HDIO_DRIVE_TASK_HDR_SIZE); - req_task->in_flags = args.tf_in_flags; + + if ((args.tf_flags & IDE_TFLAG_FLAGGED_SET_IN_FLAGS) && + req_task->in_flags.all == 0) { + req_task->in_flags.all = IDE_TASKFILE_STD_IN_FLAGS; + if (drive->addressing == 1) + req_task->in_flags.all |= (IDE_HOB_STD_IN_FLAGS << 8); + } if (copy_to_user(buf, req_task, tasksize)) { err = -EFAULT; @@ -846,19 +855,7 @@ ide_startstop_t flagged_taskfile (ide_drive_t *drive, ide_task_t *task) } } - /* - * (ks) Check taskfile in flags. - * If set, then execute as it is defined. - * If not set, then define default settings. - * The default values are: - * read all taskfile registers (except data) - * read the hob registers (sector, nsector, lcyl, hcyl) - */ - if (task->tf_in_flags.all == 0) { - task->tf_in_flags.all = IDE_TASKFILE_STD_IN_FLAGS; - if (drive->addressing == 1) - task->tf_in_flags.all |= (IDE_HOB_STD_IN_FLAGS << 8); - } + task->tf_flags |= IDE_TFLAG_FLAGGED_SET_IN_FLAGS; return do_rw_taskfile(drive, task); } diff --git a/include/linux/ide.h b/include/linux/ide.h index 7485fc705ca4..c23ef2df2cbb 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -910,6 +910,8 @@ enum { IDE_TFLAG_OUT_LBAH, IDE_TFLAG_OUT_DEVICE = (1 << 14), IDE_TFLAG_WRITE = (1 << 15), + IDE_TFLAG_FLAGGED_SET_IN_FLAGS = (1 << 16), + IDE_TFLAG_IN_DATA = (1 << 17), }; struct ide_taskfile { @@ -946,8 +948,7 @@ typedef struct ide_task_s { struct ide_taskfile tf; u8 tf_array[14]; }; - u16 tf_flags; - ide_reg_valid_t tf_in_flags; + u32 tf_flags; int data_phase; ide_pre_handler_t *prehandler; ide_handler_t *handler; -- cgit v1.2.3-59-g8ed1b From 7c0e26661dd104aaeb1391063cc986ddc0ac4aa4 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:14 +0100 Subject: sc1200: remove pointless hwif lookup loop Save PCI regs values for both IDE ports in one buffer, in order to eliminate a needless and ugly loop across all hwifs, searching for our PCI device. Partially based on the previous patch by Jeff Garzik. Cc: Jeff Garzik Cc: Andrew Morton Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/sc1200.c | 108 +++++++++++++++++------------------------------ 1 file changed, 38 insertions(+), 70 deletions(-) diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c index 707d5ff66b03..f0029b364c57 100644 --- a/drivers/ide/pci/sc1200.c +++ b/drivers/ide/pci/sc1200.c @@ -260,66 +260,39 @@ static void sc1200_set_pio_mode(ide_drive_t *drive, const u8 pio) } #ifdef CONFIG_PM -static ide_hwif_t *lookup_pci_dev (ide_hwif_t *prev, struct pci_dev *dev) -{ - int h; - - for (h = 0; h < MAX_HWIFS; h++) { - ide_hwif_t *hwif = &ide_hwifs[h]; - if (prev) { - if (hwif == prev) - prev = NULL; // found previous, now look for next match - } else { - if (hwif && hwif->pci_dev == dev) - return hwif; // found next match - } - } - return NULL; // not found -} - -typedef struct sc1200_saved_state_s { - __u32 regs[4]; -} sc1200_saved_state_t; - +struct sc1200_saved_state { + u32 regs[8]; +}; static int sc1200_suspend (struct pci_dev *dev, pm_message_t state) { - ide_hwif_t *hwif = NULL; - printk("SC1200: suspend(%u)\n", state.event); + /* + * we only save state when going from full power to less + */ if (state.event == PM_EVENT_ON) { - // we only save state when going from full power to less - - // - // Loop over all interfaces that are part of this PCI device: - // - while ((hwif = lookup_pci_dev(hwif, dev)) != NULL) { - sc1200_saved_state_t *ss; - unsigned int basereg, r; - // - // allocate a permanent save area, if not already allocated - // - ss = (sc1200_saved_state_t *)hwif->config_data; - if (ss == NULL) { - ss = kmalloc(sizeof(sc1200_saved_state_t), GFP_KERNEL); - if (ss == NULL) - return -ENOMEM; - hwif->config_data = (unsigned long)ss; - } - ss = (sc1200_saved_state_t *)hwif->config_data; - // - // Save timing registers: this may be unnecessary if - // BIOS also does it - // - basereg = hwif->channel ? 0x50 : 0x40; - for (r = 0; r < 4; ++r) { - pci_read_config_dword (hwif->pci_dev, basereg + (r<<2), &ss->regs[r]); - } + struct sc1200_saved_state *ss; + unsigned int r; + + /* + * allocate a permanent save area, if not already allocated + */ + ss = (struct sc1200_saved_state *)pci_get_drvdata(dev); + if (ss == NULL) { + ss = kmalloc(sizeof(*ss), GFP_KERNEL); + if (ss == NULL) + return -ENOMEM; + pci_set_drvdata(dev, ss); } - } - /* You don't need to iterate over disks -- sysfs should have done that for you already */ + /* + * save timing registers + * (this may be unnecessary if BIOS also does it) + */ + for (r = 0; r < 8; r++) + pci_read_config_dword(dev, 0x40 + r * 4, &ss->regs[r]); + } pci_disable_device(dev); pci_set_power_state(dev, pci_choose_state(dev, state)); @@ -328,30 +301,25 @@ static int sc1200_suspend (struct pci_dev *dev, pm_message_t state) static int sc1200_resume (struct pci_dev *dev) { - ide_hwif_t *hwif = NULL; - int i; + struct sc1200_saved_state *ss; + unsigned int r; + int i; i = pci_enable_device(dev); if (i) return i; - // - // loop over all interfaces that are part of this pci device: - // - while ((hwif = lookup_pci_dev(hwif, dev)) != NULL) { - unsigned int basereg, r; - sc1200_saved_state_t *ss = (sc1200_saved_state_t *)hwif->config_data; - - // - // Restore timing registers: this may be unnecessary if BIOS also does it - // - basereg = hwif->channel ? 0x50 : 0x40; - if (ss != NULL) { - for (r = 0; r < 4; ++r) { - pci_write_config_dword(hwif->pci_dev, basereg + (r<<2), ss->regs[r]); - } - } + ss = (struct sc1200_saved_state *)pci_get_drvdata(dev); + + /* + * restore timing registers + * (this may be unnecessary if BIOS also does it) + */ + if (ss) { + for (r = 0; r < 8; r++) + pci_write_config_dword(dev, 0x40 + r * 4, ss->regs[r]); } + return 0; } #endif -- cgit v1.2.3-59-g8ed1b From cf77249ee1a37aab37f39ea1dde9a53c23693655 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:15 +0100 Subject: ide-disk: fix __ide_do_rw_disk() to use ->OUTBSYNC Fix __ide_do_rw_disk() to use ->OUTBSYNC instead of ->OUTB (needed for pmac and scc_pata host drivers). Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index d9a4fe27685d..7b4f677f7f7f 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -247,8 +247,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, command = lba48 ? WIN_WRITE_EXT : WIN_WRITE; } - /* FIXME: ->OUTBSYNC ? */ - hwif->OUTB(command, IDE_COMMAND_REG); + hwif->OUTBSYNC(drive, command, IDE_COMMAND_REG); return pre_task_out_intr(drive, rq); } -- cgit v1.2.3-59-g8ed1b From a7bbd20b50fb12b3a604c396b3d8a3449a43edcc Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:15 +0100 Subject: ide-disk: guarantee 400ns delay after writing command register Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 7b4f677f7f7f..424207e67f9c 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -248,6 +248,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, } hwif->OUTBSYNC(drive, command, IDE_COMMAND_REG); + ndelay(400); /* FIXME */ return pre_task_out_intr(drive, rq); } -- cgit v1.2.3-59-g8ed1b From 1edee60e9d994f2b9a79b1333be39790683541fe Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:15 +0100 Subject: ide: merge flagged_taskfile() into do_rw_taskfile() Based on the earlier work by Tejun Heo. task->data_phase == TASKFILE_MULTI_{IN,OUT} vs drive->mult_count == 0 check is needed also for ide_taskfile_ioctl() requests that don't have IDE_TFLAG_FLAGGED taskfile flag set. Cc: Tejun Heo Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 3 --- drivers/ide/ide-taskfile.c | 32 ++++++++++++-------------------- include/linux/ide.h | 5 ----- 3 files changed, 12 insertions(+), 28 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 1112d8b049b9..1af2cc4f864e 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -851,9 +851,6 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, break; } - if (task->tf_flags & IDE_TFLAG_FLAGGED) - return flagged_taskfile(drive, task); - return do_rw_taskfile(drive, task); } diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 03c4a0c55bf4..1a34edb183ec 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -156,6 +156,18 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) ide_hwif_t *hwif = HWIF(drive); struct ide_taskfile *tf = &task->tf; + if (task->data_phase == TASKFILE_MULTI_IN || + task->data_phase == TASKFILE_MULTI_OUT) { + if (!drive->mult_count) { + printk(KERN_ERR "%s: multimode not set!\n", + drive->name); + return ide_stopped; + } + } + + if (task->tf_flags & IDE_TFLAG_FLAGGED) + task->tf_flags |= IDE_TFLAG_FLAGGED_SET_IN_FLAGS; + ide_tf_load(drive, task); if (task->handler != NULL) { @@ -839,23 +851,3 @@ int ide_task_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) return err; } - -/* - * NOTICE: This is additions from IBM to provide a discrete interface, - * for selective taskregister access operations. Nice JOB Klaus!!! - * Glad to be able to work and co-develop this with you and IBM. - */ -ide_startstop_t flagged_taskfile (ide_drive_t *drive, ide_task_t *task) -{ - if (task->data_phase == TASKFILE_MULTI_IN || - task->data_phase == TASKFILE_MULTI_OUT) { - if (!drive->mult_count) { - printk(KERN_ERR "%s: multimode not set!\n", drive->name); - return ide_stopped; - } - } - - task->tf_flags |= IDE_TFLAG_FLAGGED_SET_IN_FLAGS; - - return do_rw_taskfile(drive, task); -} diff --git a/include/linux/ide.h b/include/linux/ide.h index c23ef2df2cbb..849447572a6b 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -972,11 +972,6 @@ void ide_pktcmd_tf_load(ide_drive_t *, u32, u16, u8); */ extern ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *); -/* - * Special Flagged Register Validation Caller - */ -extern ide_startstop_t flagged_taskfile(ide_drive_t *, ide_task_t *); - extern ide_startstop_t set_multmode_intr(ide_drive_t *); extern ide_startstop_t set_geometry_intr(ide_drive_t *); extern ide_startstop_t recal_intr(ide_drive_t *); -- cgit v1.2.3-59-g8ed1b From 10d90157c83d4b6743c9063c36f9e7f27aa254b6 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:16 +0100 Subject: ide: convert do_rw_taskfile() to use ->data_phase * Use task->data_phase in do_rw_taskfile() to decide what to do. * task->prehandler is only used by TASKFILE[_MULTI]_OUT so just use pre_task_out_intr() directly and remove no longer needed 'prehandler' field from ide_task_t. * Remove no longer needed ide_pre_handler_t type. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-taskfile.c | 25 +++++++++++++------------ include/linux/ide.h | 2 -- 2 files changed, 13 insertions(+), 14 deletions(-) diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 1a34edb183ec..5f6d01a4222c 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -170,23 +170,25 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) ide_tf_load(drive, task); - if (task->handler != NULL) { - if (task->prehandler != NULL) { - hwif->OUTBSYNC(drive, tf->command, IDE_COMMAND_REG); - ndelay(400); /* FIXME */ - return task->prehandler(drive, task->rq); - } + switch (task->data_phase) { + case TASKFILE_MULTI_OUT: + case TASKFILE_OUT: + hwif->OUTBSYNC(drive, tf->command, IDE_COMMAND_REG); + ndelay(400); /* FIXME */ + return pre_task_out_intr(drive, task->rq); + case TASKFILE_MULTI_IN: + case TASKFILE_IN: + case TASKFILE_NO_DATA: ide_execute_command(drive, tf->command, task->handler, WAIT_WORSTCASE, NULL); return ide_started; - } - - if (task_dma_ok(task) && drive->using_dma && !hwif->dma_setup(drive)) { + default: + if (task_dma_ok(task) == 0 || drive->using_dma == 0 || + hwif->dma_setup(drive)) + return ide_stopped; hwif->dma_exec_cmd(drive, tf->command); hwif->dma_start(drive); return ide_started; } - - return ide_stopped; } /* @@ -665,7 +667,6 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) } /* fall through */ case TASKFILE_OUT: - args.prehandler = &pre_task_out_intr; args.handler = &task_out_intr; /* fall through */ case TASKFILE_OUT_DMAQ: diff --git a/include/linux/ide.h b/include/linux/ide.h index 849447572a6b..2c28fb75915a 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -626,7 +626,6 @@ typedef struct hwif_s { /* * internal ide interrupt handler type */ -typedef ide_startstop_t (ide_pre_handler_t)(ide_drive_t *, struct request *); typedef ide_startstop_t (ide_handler_t)(ide_drive_t *); typedef int (ide_expiry_t)(ide_drive_t *); @@ -950,7 +949,6 @@ typedef struct ide_task_s { }; u32 tf_flags; int data_phase; - ide_pre_handler_t *prehandler; ide_handler_t *handler; struct request *rq; /* copy of request */ void *special; /* valid_t generally */ -- cgit v1.2.3-59-g8ed1b From 1192e528e064ebb9a578219731d2b0f78ca3c1ec Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:16 +0100 Subject: ide: use ->data_phase to set ->handler in do_rw_taskfile() * Use ->data_phase to set ->handler in do_rw_taskfile() instead of setting ->handler in callers of ide_raw_taskfile()/do_rw_taskfile(). * Unexport task_no_data_intr() and make it static. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 2 -- drivers/ide/ide-io.c | 1 - drivers/ide/ide-taskfile.c | 16 ++++++++++------ include/linux/ide.h | 1 - 4 files changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 424207e67f9c..a063957e9add 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -518,7 +518,6 @@ static int get_smart_data(ide_drive_t *drive, u8 *buf, u8 sub_cmd) tf->command = WIN_SMART; args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; args.data_phase = TASKFILE_IN; - args.handler = task_in_intr; (void) smart_enable(drive); return ide_raw_taskfile(drive, &args, buf, 1); } @@ -608,7 +607,6 @@ static void idedisk_prepare_flush(struct request_queue *q, struct request *rq) task.tf.command = WIN_FLUSH_CACHE; task.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; task.data_phase = TASKFILE_NO_DATA; - task.handler = task_no_data_intr; rq->cmd_type = REQ_TYPE_ATA_TASKFILE; rq->cmd_flags |= REQ_SOFTBARRIER; diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 1af2cc4f864e..18ac1bd0811f 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -234,7 +234,6 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * out_do_tf: args->tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; args->data_phase = TASKFILE_NO_DATA; - args->handler = task_no_data_intr; return do_rw_taskfile(drive, args); } diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 5f6d01a4222c..835465d61f70 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -128,7 +128,6 @@ int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf) args.tf.command = WIN_PIDENTIFY; args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; args.data_phase = TASKFILE_IN; - args.handler = task_in_intr; return ide_raw_taskfile(drive, &args, buf, 1); } @@ -151,6 +150,9 @@ static int inline task_dma_ok(ide_task_t *task) return 0; } +static ide_startstop_t task_no_data_intr(ide_drive_t *); +static ide_startstop_t task_out_intr(ide_drive_t *); + ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) { ide_hwif_t *hwif = HWIF(drive); @@ -173,12 +175,18 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) switch (task->data_phase) { case TASKFILE_MULTI_OUT: case TASKFILE_OUT: + task->handler = task_out_intr; hwif->OUTBSYNC(drive, tf->command, IDE_COMMAND_REG); ndelay(400); /* FIXME */ return pre_task_out_intr(drive, task->rq); case TASKFILE_MULTI_IN: case TASKFILE_IN: + task->handler = task_in_intr; + /* fall-through */ case TASKFILE_NO_DATA: + /* WIN_{SPECIFY,RESTORE,SETMULT} use custom handlers */ + if (task->handler == NULL) + task->handler = task_no_data_intr; ide_execute_command(drive, tf->command, task->handler, WAIT_WORSTCASE, NULL); return ide_started; default: @@ -248,7 +256,7 @@ ide_startstop_t recal_intr (ide_drive_t *drive) /* * Handler for commands without a data phase */ -ide_startstop_t task_no_data_intr (ide_drive_t *drive) +static ide_startstop_t task_no_data_intr(ide_drive_t *drive) { ide_task_t *args = HWGROUP(drive)->rq->special; ide_hwif_t *hwif = HWIF(drive); @@ -544,7 +552,6 @@ EXPORT_SYMBOL(ide_raw_taskfile); int ide_no_data_taskfile(ide_drive_t *drive, ide_task_t *task) { task->data_phase = TASKFILE_NO_DATA; - task->handler = task_no_data_intr; return ide_raw_taskfile(drive, task, NULL, 0); } @@ -667,7 +674,6 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) } /* fall through */ case TASKFILE_OUT: - args.handler = &task_out_intr; /* fall through */ case TASKFILE_OUT_DMAQ: case TASKFILE_OUT_DMA: @@ -685,7 +691,6 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) } /* fall through */ case TASKFILE_IN: - args.handler = &task_in_intr; /* fall through */ case TASKFILE_IN_DMAQ: case TASKFILE_IN_DMA: @@ -693,7 +698,6 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) data_buf = inbuf; break; case TASKFILE_NO_DATA: - args.handler = &task_no_data_intr; break; default: err = -EFAULT; diff --git a/include/linux/ide.h b/include/linux/ide.h index 2c28fb75915a..5d675f172037 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -973,7 +973,6 @@ extern ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *); extern ide_startstop_t set_multmode_intr(ide_drive_t *); extern ide_startstop_t set_geometry_intr(ide_drive_t *); extern ide_startstop_t recal_intr(ide_drive_t *); -extern ide_startstop_t task_no_data_intr(ide_drive_t *); extern ide_startstop_t task_in_intr(ide_drive_t *); extern ide_startstop_t pre_task_out_intr(ide_drive_t *, struct request *); -- cgit v1.2.3-59-g8ed1b From 57d7366b78b74a9eef873e8212c03d8c2033a764 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:16 +0100 Subject: ide: remove 'handler' field from ide_task_t (take 2) * Add IDE_TFLAG_CUSTOM_HANDLER taskfile flag and use it for internal requests which require custom handlers. Check the flag in do_rw_taskfile() and set handler accordingly. * Cleanup ide_init_{specify,restore,setmult}_cmd() and rename it to ide_tf_set_{specify,restore,setmult}_cmd(). * Make {set_geometry,recal,set_multmode}_intr() static. * Remove no longer needed 'handler' field from ide_task_t. v2: * 'handler' in do_rw_taskfile() must be set to NULL initially. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 41 ++++++++++++++++++----------------------- drivers/ide/ide-taskfile.c | 28 +++++++++++++++++++--------- include/linux/ide.h | 5 +---- 3 files changed, 38 insertions(+), 36 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 18ac1bd0811f..48c38b68bd36 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -637,32 +637,26 @@ static ide_startstop_t drive_cmd_intr (ide_drive_t *drive) return ide_stopped; } -static void ide_init_specify_cmd(ide_drive_t *drive, ide_task_t *task) +static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf) { - task->tf.nsect = drive->sect; - task->tf.lbal = drive->sect; - task->tf.lbam = drive->cyl; - task->tf.lbah = drive->cyl >> 8; - task->tf.device = ((drive->head - 1) | drive->select.all) & ~ATA_LBA; - task->tf.command = WIN_SPECIFY; - - task->handler = &set_geometry_intr; + tf->nsect = drive->sect; + tf->lbal = drive->sect; + tf->lbam = drive->cyl; + tf->lbah = drive->cyl >> 8; + tf->device = ((drive->head - 1) | drive->select.all) & ~ATA_LBA; + tf->command = WIN_SPECIFY; } -static void ide_init_restore_cmd(ide_drive_t *drive, ide_task_t *task) +static void ide_tf_set_restore_cmd(ide_drive_t *drive, struct ide_taskfile *tf) { - task->tf.nsect = drive->sect; - task->tf.command = WIN_RESTORE; - - task->handler = &recal_intr; + tf->nsect = drive->sect; + tf->command = WIN_RESTORE; } -static void ide_init_setmult_cmd(ide_drive_t *drive, ide_task_t *task) +static void ide_tf_set_setmult_cmd(ide_drive_t *drive, struct ide_taskfile *tf) { - task->tf.nsect = drive->mult_req; - task->tf.command = WIN_SETMULT; - - task->handler = &set_multmode_intr; + tf->nsect = drive->mult_req; + tf->command = WIN_SETMULT; } static ide_startstop_t ide_disk_special(ide_drive_t *drive) @@ -675,15 +669,15 @@ static ide_startstop_t ide_disk_special(ide_drive_t *drive) if (s->b.set_geometry) { s->b.set_geometry = 0; - ide_init_specify_cmd(drive, &args); + ide_tf_set_specify_cmd(drive, &args.tf); } else if (s->b.recalibrate) { s->b.recalibrate = 0; - ide_init_restore_cmd(drive, &args); + ide_tf_set_restore_cmd(drive, &args.tf); } else if (s->b.set_multmode) { s->b.set_multmode = 0; if (drive->mult_req > drive->id->max_multsect) drive->mult_req = drive->id->max_multsect; - ide_init_setmult_cmd(drive, &args); + ide_tf_set_setmult_cmd(drive, &args.tf); } else if (s->all) { int special = s->all; s->all = 0; @@ -691,7 +685,8 @@ static ide_startstop_t ide_disk_special(ide_drive_t *drive) return ide_stopped; } - args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE; + args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE | + IDE_TFLAG_CUSTOM_HANDLER; do_rw_taskfile(drive, &args); diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 835465d61f70..236f91f11a73 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -151,12 +151,15 @@ static int inline task_dma_ok(ide_task_t *task) } static ide_startstop_t task_no_data_intr(ide_drive_t *); -static ide_startstop_t task_out_intr(ide_drive_t *); +static ide_startstop_t set_geometry_intr(ide_drive_t *); +static ide_startstop_t recal_intr(ide_drive_t *); +static ide_startstop_t set_multmode_intr(ide_drive_t *); ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) { ide_hwif_t *hwif = HWIF(drive); struct ide_taskfile *tf = &task->tf; + ide_handler_t *handler = NULL; if (task->data_phase == TASKFILE_MULTI_IN || task->data_phase == TASKFILE_MULTI_OUT) { @@ -175,19 +178,26 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) switch (task->data_phase) { case TASKFILE_MULTI_OUT: case TASKFILE_OUT: - task->handler = task_out_intr; hwif->OUTBSYNC(drive, tf->command, IDE_COMMAND_REG); ndelay(400); /* FIXME */ return pre_task_out_intr(drive, task->rq); case TASKFILE_MULTI_IN: case TASKFILE_IN: - task->handler = task_in_intr; + handler = task_in_intr; /* fall-through */ case TASKFILE_NO_DATA: + if (handler == NULL) + handler = task_no_data_intr; /* WIN_{SPECIFY,RESTORE,SETMULT} use custom handlers */ - if (task->handler == NULL) - task->handler = task_no_data_intr; - ide_execute_command(drive, tf->command, task->handler, WAIT_WORSTCASE, NULL); + if (task->tf_flags & IDE_TFLAG_CUSTOM_HANDLER) { + switch (tf->command) { + case WIN_SPECIFY: handler = set_geometry_intr; break; + case WIN_RESTORE: handler = recal_intr; break; + case WIN_SETMULT: handler = set_multmode_intr; break; + } + } + ide_execute_command(drive, tf->command, handler, + WAIT_WORSTCASE, NULL); return ide_started; default: if (task_dma_ok(task) == 0 || drive->using_dma == 0 || @@ -202,7 +212,7 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) /* * set_multmode_intr() is invoked on completion of a WIN_SETMULT cmd. */ -ide_startstop_t set_multmode_intr (ide_drive_t *drive) +static ide_startstop_t set_multmode_intr(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); u8 stat; @@ -220,7 +230,7 @@ ide_startstop_t set_multmode_intr (ide_drive_t *drive) /* * set_geometry_intr() is invoked on completion of a WIN_SPECIFY cmd. */ -ide_startstop_t set_geometry_intr (ide_drive_t *drive) +static ide_startstop_t set_geometry_intr(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); int retries = 5; @@ -243,7 +253,7 @@ ide_startstop_t set_geometry_intr (ide_drive_t *drive) /* * recal_intr() is invoked on completion of a WIN_RESTORE (recalibrate) cmd. */ -ide_startstop_t recal_intr (ide_drive_t *drive) +static ide_startstop_t recal_intr(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); u8 stat; diff --git a/include/linux/ide.h b/include/linux/ide.h index 5d675f172037..721c9d8f41a2 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -911,6 +911,7 @@ enum { IDE_TFLAG_WRITE = (1 << 15), IDE_TFLAG_FLAGGED_SET_IN_FLAGS = (1 << 16), IDE_TFLAG_IN_DATA = (1 << 17), + IDE_TFLAG_CUSTOM_HANDLER = (1 << 18), }; struct ide_taskfile { @@ -949,7 +950,6 @@ typedef struct ide_task_s { }; u32 tf_flags; int data_phase; - ide_handler_t *handler; struct request *rq; /* copy of request */ void *special; /* valid_t generally */ } ide_task_t; @@ -970,9 +970,6 @@ void ide_pktcmd_tf_load(ide_drive_t *, u32, u16, u8); */ extern ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *); -extern ide_startstop_t set_multmode_intr(ide_drive_t *); -extern ide_startstop_t set_geometry_intr(ide_drive_t *); -extern ide_startstop_t recal_intr(ide_drive_t *); extern ide_startstop_t task_in_intr(ide_drive_t *); extern ide_startstop_t pre_task_out_intr(ide_drive_t *, struct request *); -- cgit v1.2.3-59-g8ed1b From c52ea915d7fdc96819964b32eb124b5ccd22b9af Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:16 +0100 Subject: ide-disk: extend timeout for PIO-in commands s/WAIT_CMD/WAIT_WORSTCASE/ to make the timeout the same as in do_rw_taskfile() Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index a063957e9add..851374ef55cf 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -236,7 +236,8 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, command = lba48 ? WIN_READ_EXT : WIN_READ; } - ide_execute_command(drive, command, &task_in_intr, WAIT_CMD, NULL); + ide_execute_command(drive, command, &task_in_intr, + WAIT_WORSTCASE, NULL); return ide_started; } else { if (drive->mult_count) { -- cgit v1.2.3-59-g8ed1b From ba76ae3883ad9faa32a6b35271c6a407d6c96ca9 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:16 +0100 Subject: ide-disk: add ide_tf_set_cmd() helper * Add ide_tf_set_cmd() helper for selecting/setting command and data phase (note: DMA data phases are there for completness, they are not required ATM). * Set IDE_TFLAG_WRITE taskfile flag for write requests in __ide_do_rw_disk(). * Convert __ide_do_rw_disk() to use the new ide_tf_set_cmd() helper. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 85 ++++++++++++++++++++++++++++++++------------------ 1 file changed, 55 insertions(+), 30 deletions(-) diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 851374ef55cf..97abc91db7d0 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -129,6 +129,50 @@ static int lba_capacity_is_ok (struct hd_driveid *id) return 0; /* lba_capacity value may be bad */ } +static const u8 ide_rw_cmds[] = { + WIN_MULTREAD, + WIN_MULTWRITE, + WIN_MULTREAD_EXT, + WIN_MULTWRITE_EXT, + WIN_READ, + WIN_WRITE, + WIN_READ_EXT, + WIN_WRITE_EXT, + WIN_READDMA, + WIN_WRITEDMA, + WIN_READDMA_EXT, + WIN_WRITEDMA_EXT, +}; + +static const u8 ide_data_phases[] = { + TASKFILE_MULTI_IN, + TASKFILE_MULTI_OUT, + TASKFILE_IN, + TASKFILE_OUT, + TASKFILE_IN_DMA, + TASKFILE_OUT_DMA, +}; + +static void ide_tf_set_cmd(ide_drive_t *drive, ide_task_t *task, u8 dma) +{ + u8 index, lba48, write; + + lba48 = (task->tf_flags & IDE_TFLAG_LBA48) ? 2 : 0; + write = (task->tf_flags & IDE_TFLAG_WRITE) ? 1 : 0; + + if (dma) + index = drive->vdma ? 4 : 8; + else + index = drive->mult_count ? 0 : 4; + + task->tf.command = ide_rw_cmds[index + lba48 + write]; + + if (dma) + index = 8; /* fixup index */ + + task->data_phase = ide_data_phases[index / 2 + write]; +} + /* * __ide_do_rw_disk() issues READ and WRITE commands to a disk, * using LBA if supported, or CHS otherwise, to address sectors. @@ -139,7 +183,6 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, unsigned int dma = drive->using_dma; u16 nsectors = (u16)rq->nr_sectors; u8 lba48 = (drive->addressing == 1) ? 1 : 0; - u8 command = WIN_NOP; ide_task_t task; struct ide_taskfile *tf = &task.tf; @@ -205,50 +248,32 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, tf->device = head; } + if (rq_data_dir(rq)) + task.tf_flags |= IDE_TFLAG_WRITE; + + ide_tf_set_cmd(drive, &task, dma); + ide_tf_load(drive, &task); if (dma) { if (!hwif->dma_setup(drive)) { - if (rq_data_dir(rq)) { - command = lba48 ? WIN_WRITEDMA_EXT : WIN_WRITEDMA; - if (drive->vdma) - command = lba48 ? WIN_WRITE_EXT: WIN_WRITE; - } else { - command = lba48 ? WIN_READDMA_EXT : WIN_READDMA; - if (drive->vdma) - command = lba48 ? WIN_READ_EXT: WIN_READ; - } - hwif->dma_exec_cmd(drive, command); + hwif->dma_exec_cmd(drive, tf->command); hwif->dma_start(drive); return ide_started; } /* fallback to PIO */ + ide_tf_set_cmd(drive, &task, 0); ide_init_sg_cmd(drive, rq); } - if (rq_data_dir(rq) == READ) { - - if (drive->mult_count) { - hwif->data_phase = TASKFILE_MULTI_IN; - command = lba48 ? WIN_MULTREAD_EXT : WIN_MULTREAD; - } else { - hwif->data_phase = TASKFILE_IN; - command = lba48 ? WIN_READ_EXT : WIN_READ; - } + hwif->data_phase = task.data_phase; - ide_execute_command(drive, command, &task_in_intr, + if (rq_data_dir(rq) == READ) { + ide_execute_command(drive, tf->command, &task_in_intr, WAIT_WORSTCASE, NULL); return ide_started; } else { - if (drive->mult_count) { - hwif->data_phase = TASKFILE_MULTI_OUT; - command = lba48 ? WIN_MULTWRITE_EXT : WIN_MULTWRITE; - } else { - hwif->data_phase = TASKFILE_OUT; - command = lba48 ? WIN_WRITE_EXT : WIN_WRITE; - } - - hwif->OUTBSYNC(drive, command, IDE_COMMAND_REG); + hwif->OUTBSYNC(drive, tf->command, IDE_COMMAND_REG); ndelay(400); /* FIXME */ return pre_task_out_intr(drive, rq); -- cgit v1.2.3-59-g8ed1b From f6e29e35cc0f9facf2eb0b0454f9b09021b5aa6f Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:16 +0100 Subject: ide-disk: use do_rw_taskfile() (take 2) * Add IDE_TFLAG_DMA_PIO_FALLBACK taskfile flag to indicate the need to skip loading taskfile registers in do_rw_taskfile(). * Export do_rw_taskfile(). * Convert __ide_do_rw_disk() to use do_rw_taskfile(). * Unexport ide_tf_load(). * Unexport {pre_task_out,task_in}_intr() and make it static. * Remove incorrect comment about do_rw_taskfile() from . There should be no functionality changes caused by this patch. v2: * Add missing blk_fs_request() check to task_dma_ok() (for VDMA). Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 29 ++++++++++------------------- drivers/ide/ide-taskfile.c | 16 ++++++++-------- include/linux/ide.h | 9 ++------- 3 files changed, 20 insertions(+), 34 deletions(-) diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 97abc91db7d0..3d7127ba67a0 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -185,6 +185,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, u8 lba48 = (drive->addressing == 1) ? 1 : 0; ide_task_t task; struct ide_taskfile *tf = &task.tf; + ide_startstop_t rc; if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && lba48 && dma) { if (block + rq->nr_sectors > 1ULL << 28) @@ -252,32 +253,22 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, task.tf_flags |= IDE_TFLAG_WRITE; ide_tf_set_cmd(drive, &task, dma); + if (!dma) + hwif->data_phase = task.data_phase; + task.rq = rq; - ide_tf_load(drive, &task); + rc = do_rw_taskfile(drive, &task); - if (dma) { - if (!hwif->dma_setup(drive)) { - hwif->dma_exec_cmd(drive, tf->command); - hwif->dma_start(drive); - return ide_started; - } + if (rc == ide_stopped && dma) { /* fallback to PIO */ + task.tf_flags |= IDE_TFLAG_DMA_PIO_FALLBACK; ide_tf_set_cmd(drive, &task, 0); + hwif->data_phase = task.data_phase; ide_init_sg_cmd(drive, rq); + rc = do_rw_taskfile(drive, &task); } - hwif->data_phase = task.data_phase; - - if (rq_data_dir(rq) == READ) { - ide_execute_command(drive, tf->command, &task_in_intr, - WAIT_WORSTCASE, NULL); - return ide_started; - } else { - hwif->OUTBSYNC(drive, tf->command, IDE_COMMAND_REG); - ndelay(400); /* FIXME */ - - return pre_task_out_intr(drive, rq); - } + return rc; } /* diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 236f91f11a73..2d63ea9ee61b 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -114,8 +114,6 @@ void ide_tf_load(ide_drive_t *drive, ide_task_t *task) hwif->OUTB((tf->device & HIHI) | drive->select.all, IDE_SELECT_REG); } -EXPORT_SYMBOL_GPL(ide_tf_load); - int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf) { ide_task_t args; @@ -133,7 +131,7 @@ int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf) static int inline task_dma_ok(ide_task_t *task) { - if (task->tf_flags & IDE_TFLAG_FLAGGED) + if (blk_fs_request(task->rq) || (task->tf_flags & IDE_TFLAG_FLAGGED)) return 1; switch (task->tf.command) { @@ -154,6 +152,8 @@ static ide_startstop_t task_no_data_intr(ide_drive_t *); static ide_startstop_t set_geometry_intr(ide_drive_t *); static ide_startstop_t recal_intr(ide_drive_t *); static ide_startstop_t set_multmode_intr(ide_drive_t *); +static ide_startstop_t pre_task_out_intr(ide_drive_t *, struct request *); +static ide_startstop_t task_in_intr(ide_drive_t *); ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) { @@ -173,7 +173,8 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) if (task->tf_flags & IDE_TFLAG_FLAGGED) task->tf_flags |= IDE_TFLAG_FLAGGED_SET_IN_FLAGS; - ide_tf_load(drive, task); + if ((task->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) + ide_tf_load(drive, task); switch (task->data_phase) { case TASKFILE_MULTI_OUT: @@ -208,6 +209,7 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) return ide_started; } } +EXPORT_SYMBOL_GPL(do_rw_taskfile); /* * set_multmode_intr() is invoked on completion of a WIN_SETMULT cmd. @@ -446,7 +448,7 @@ static void task_end_request(ide_drive_t *drive, struct request *rq, u8 stat) /* * Handler for command with PIO data-in phase (Read/Read Multiple). */ -ide_startstop_t task_in_intr (ide_drive_t *drive) +static ide_startstop_t task_in_intr(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; struct request *rq = HWGROUP(drive)->rq; @@ -477,7 +479,6 @@ ide_startstop_t task_in_intr (ide_drive_t *drive) return ide_started; } -EXPORT_SYMBOL(task_in_intr); /* * Handler for command with PIO data-out phase (Write/Write Multiple). @@ -507,7 +508,7 @@ static ide_startstop_t task_out_intr (ide_drive_t *drive) return ide_started; } -ide_startstop_t pre_task_out_intr (ide_drive_t *drive, struct request *rq) +static ide_startstop_t pre_task_out_intr(ide_drive_t *drive, struct request *rq) { ide_startstop_t startstop; @@ -528,7 +529,6 @@ ide_startstop_t pre_task_out_intr (ide_drive_t *drive, struct request *rq) return ide_started; } -EXPORT_SYMBOL(pre_task_out_intr); int ide_raw_taskfile(ide_drive_t *drive, ide_task_t *task, u8 *buf, u16 nsect) { diff --git a/include/linux/ide.h b/include/linux/ide.h index 721c9d8f41a2..c333a7528d94 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -912,6 +912,7 @@ enum { IDE_TFLAG_FLAGGED_SET_IN_FLAGS = (1 << 16), IDE_TFLAG_IN_DATA = (1 << 17), IDE_TFLAG_CUSTOM_HANDLER = (1 << 18), + IDE_TFLAG_DMA_PIO_FALLBACK = (1 << 19), }; struct ide_taskfile { @@ -965,13 +966,7 @@ extern int drive_is_ready(ide_drive_t *); void ide_pktcmd_tf_load(ide_drive_t *, u32, u16, u8); -/* - * taskfile io for disks for now...and builds request from ide_ioctl - */ -extern ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *); - -extern ide_startstop_t task_in_intr(ide_drive_t *); -extern ide_startstop_t pre_task_out_intr(ide_drive_t *, struct request *); +ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *); int ide_raw_taskfile(ide_drive_t *, ide_task_t *, u8 *, u16); int ide_no_data_taskfile(ide_drive_t *, ide_task_t *); -- cgit v1.2.3-59-g8ed1b From d32444771b154c3ec37ebf6439004653560c2411 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:17 +0100 Subject: ide: fix registers loading order in ide_dump_ata_status() Fix registers loading order in ide_dump_ata_status()/ide_read_24(). Load registers in this order: * IDE_SECTOR_REG * IDE_LCYL_REG * IDE_HCYL_REG * IDE_SELECT_REG It shouldn't affect anything (just a usual paranoia to separate changes which change the way in which hardware is accessed from code cleanups). Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-iops.c | 4 ++-- drivers/ide/ide-lib.c | 23 ++++++++++++++--------- 2 files changed, 16 insertions(+), 11 deletions(-) diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 106454211cb8..38d6b15d6c47 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -160,9 +160,9 @@ EXPORT_SYMBOL(default_hwif_mmiops); u32 ide_read_24 (ide_drive_t *drive) { - u8 hcyl = HWIF(drive)->INB(IDE_HCYL_REG); - u8 lcyl = HWIF(drive)->INB(IDE_LCYL_REG); u8 sect = HWIF(drive)->INB(IDE_SECTOR_REG); + u8 lcyl = HWIF(drive)->INB(IDE_LCYL_REG); + u8 hcyl = HWIF(drive)->INB(IDE_HCYL_REG); return (hcyl<<16)|(lcyl<<8)|sect; } diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 562f5efae9c6..001085845a79 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -524,19 +524,24 @@ static u8 ide_dump_ata_status(ide_drive_t *drive, const char *msg, u8 stat) (unsigned long long) sectors, high, low); } else { - u8 cur = hwif->INB(IDE_SELECT_REG); + u8 sector, lcyl, hcyl, cur; + + sector = hwif->INB(IDE_SECTOR_REG); + lcyl = hwif->INB(IDE_LCYL_REG); + hcyl = hwif->INB(IDE_HCYL_REG); + cur = hwif->INB(IDE_SELECT_REG); + if (cur & 0x40) { /* using LBA? */ printk(", LBAsect=%ld", (unsigned long) - ((cur&0xf)<<24) - |(hwif->INB(IDE_HCYL_REG)<<16) - |(hwif->INB(IDE_LCYL_REG)<<8) - | hwif->INB(IDE_SECTOR_REG)); + ((cur & 0xf) << 24) | + (hcyl << 16) | + (lcyl << 8) | + sector); } else { printk(", CHS=%d/%d/%d", - (hwif->INB(IDE_HCYL_REG)<<8) + - hwif->INB(IDE_LCYL_REG), - cur & 0xf, - hwif->INB(IDE_SECTOR_REG)); + (hcyl << 8) + lcyl, + cur & 0xf, + sector); } } if (HWGROUP(drive) && HWGROUP(drive)->rq) -- cgit v1.2.3-59-g8ed1b From c2b57cdc1d2976444d451a2a2e43e11b61ed0638 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:17 +0100 Subject: ide: add ide_tf_read() helper * Factor out code reading taskfile registers from ide_end_drive_cmd() to the new ide_tf_read() helper. * Add IDE_TFLAG_IN_* taskfile flags to indicate the need to load particular IDE taskfile register in ide_tf_read(). * Update ide_end_drive_cmd() to set respective IDE_TFLAG_IN_* taksfile flags. * Add ide_get_lba_addr() for getting LBA sector address from taskfile struct. * Factor out code getting sector address from ide_dump_ata_status() to the new ide_dump_sector() function. * Convert ide_dump_sector() to use ide_tf_read() and ide_get_lba_addr(). * Remove no longer needed ide_read_24(). The only change in functionality caused by this patch is that ide_dump_ata_status() no longer prints "high"/"low" parts of LBA48 sector address (of course LBA48 sector address is still printed). Cc: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 68 ++++++++++++++++++++++++++++++++++--------------- drivers/ide/ide-iops.c | 8 ------ drivers/ide/ide-lib.c | 69 +++++++++++++++++++++++++++----------------------- include/linux/ide.h | 24 ++++++++++++++++-- 4 files changed, 106 insertions(+), 63 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 48c38b68bd36..e053e00a7058 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -297,6 +297,48 @@ static void ide_complete_pm_request (ide_drive_t *drive, struct request *rq) spin_unlock_irqrestore(&ide_lock, flags); } +void ide_tf_read(ide_drive_t *drive, ide_task_t *task) +{ + ide_hwif_t *hwif = drive->hwif; + struct ide_taskfile *tf = &task->tf; + + if (task->tf_flags & IDE_TFLAG_IN_DATA) { + u16 data = hwif->INW(IDE_DATA_REG); + + tf->data = data & 0xff; + tf->hob_data = (data >> 8) & 0xff; + } + + /* be sure we're looking at the low order bits */ + hwif->OUTB(drive->ctl & ~0x80, IDE_CONTROL_REG); + + if (task->tf_flags & IDE_TFLAG_IN_NSECT) + tf->nsect = hwif->INB(IDE_NSECTOR_REG); + if (task->tf_flags & IDE_TFLAG_IN_LBAL) + tf->lbal = hwif->INB(IDE_SECTOR_REG); + if (task->tf_flags & IDE_TFLAG_IN_LBAM) + tf->lbam = hwif->INB(IDE_LCYL_REG); + if (task->tf_flags & IDE_TFLAG_IN_LBAH) + tf->lbah = hwif->INB(IDE_HCYL_REG); + if (task->tf_flags & IDE_TFLAG_IN_DEVICE) + tf->device = hwif->INB(IDE_SELECT_REG); + + if (task->tf_flags & IDE_TFLAG_LBA48) { + hwif->OUTB(drive->ctl | 0x80, IDE_CONTROL_REG); + + if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) + tf->hob_feature = hwif->INB(IDE_FEATURE_REG); + if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT) + tf->hob_nsect = hwif->INB(IDE_NSECTOR_REG); + if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL) + tf->hob_lbal = hwif->INB(IDE_SECTOR_REG); + if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM) + tf->hob_lbam = hwif->INB(IDE_LCYL_REG); + if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH) + tf->hob_lbah = hwif->INB(IDE_HCYL_REG); + } +} + /** * ide_end_drive_cmd - end an explicit drive command * @drive: command @@ -339,30 +381,14 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err) if (args) { struct ide_taskfile *tf = &args->tf; - if (args->tf_flags & IDE_TFLAG_IN_DATA) { - u16 data = hwif->INW(IDE_DATA_REG); - - tf->data = data & 0xff; - tf->hob_data = (data >> 8) & 0xff; - } tf->error = err; - /* be sure we're looking at the low order bits */ - hwif->OUTB(drive->ctl & ~0x80, IDE_CONTROL_REG); - tf->nsect = hwif->INB(IDE_NSECTOR_REG); - tf->lbal = hwif->INB(IDE_SECTOR_REG); - tf->lbam = hwif->INB(IDE_LCYL_REG); - tf->lbah = hwif->INB(IDE_HCYL_REG); - tf->device = hwif->INB(IDE_SELECT_REG); tf->status = stat; - if (args->tf_flags & IDE_TFLAG_LBA48) { - hwif->OUTB(drive->ctl|0x80, IDE_CONTROL_REG); - tf->hob_feature = hwif->INB(IDE_FEATURE_REG); - tf->hob_nsect = hwif->INB(IDE_NSECTOR_REG); - tf->hob_lbal = hwif->INB(IDE_SECTOR_REG); - tf->hob_lbam = hwif->INB(IDE_LCYL_REG); - tf->hob_lbah = hwif->INB(IDE_HCYL_REG); - } + args->tf_flags |= (IDE_TFLAG_IN_TF|IDE_TFLAG_IN_DEVICE); + if (args->tf_flags & IDE_TFLAG_LBA48) + args->tf_flags |= IDE_TFLAG_IN_HOB; + + ide_tf_read(drive, args); } } else if (blk_pm_request(rq)) { struct request_pm_state *pm = rq->data; diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 38d6b15d6c47..c97c0719ddf1 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -158,14 +158,6 @@ void default_hwif_mmiops (ide_hwif_t *hwif) EXPORT_SYMBOL(default_hwif_mmiops); -u32 ide_read_24 (ide_drive_t *drive) -{ - u8 sect = HWIF(drive)->INB(IDE_SECTOR_REG); - u8 lcyl = HWIF(drive)->INB(IDE_LCYL_REG); - u8 hcyl = HWIF(drive)->INB(IDE_HCYL_REG); - return (hcyl<<16)|(lcyl<<8)|sect; -} - void SELECT_DRIVE (ide_drive_t *drive) { if (HWIF(drive)->selectproc) diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 001085845a79..15736d4ce9b4 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -479,6 +479,42 @@ static void ide_dump_opcode(ide_drive_t *drive) printk("0x%02x\n", opcode); } +static u64 ide_get_lba_addr(struct ide_taskfile *tf, int lba48) +{ + u32 high, low; + + if (lba48) + high = (tf->hob_lbah << 16) | (tf->hob_lbam << 8) | + tf->hob_lbal; + else + high = tf->device & 0xf; + low = (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal; + + return ((u64)high << 24) | low; +} + +static void ide_dump_sector(ide_drive_t *drive) +{ + ide_task_t task; + struct ide_taskfile *tf = &task.tf; + int lba48 = (drive->addressing == 1) ? 1 : 0; + + memset(&task, 0, sizeof(task)); + if (lba48) + task.tf_flags = IDE_TFLAG_IN_LBA | IDE_TFLAG_IN_HOB_LBA | + IDE_TFLAG_LBA48; + else + task.tf_flags = IDE_TFLAG_IN_LBA | IDE_TFLAG_IN_DEVICE; + + ide_tf_read(drive, &task); + + if (lba48 || (tf->device & ATA_LBA)) + printk(", LBAsect=%llu", ide_get_lba_addr(tf, lba48)); + else + printk(", CHS=%d/%d/%d", (tf->lbah << 8) + tf->lbam, + tf->device & 0xf, tf->lbal); +} + static u8 ide_dump_ata_status(ide_drive_t *drive, const char *msg, u8 stat) { ide_hwif_t *hwif = HWIF(drive); @@ -512,38 +548,7 @@ static u8 ide_dump_ata_status(ide_drive_t *drive, const char *msg, u8 stat) printk("}"); if ((err & (BBD_ERR | ABRT_ERR)) == BBD_ERR || (err & (ECC_ERR|ID_ERR|MARK_ERR))) { - if (drive->addressing == 1) { - __u64 sectors = 0; - u32 low = 0, high = 0; - hwif->OUTB(drive->ctl&~0x80, IDE_CONTROL_REG); - low = ide_read_24(drive); - hwif->OUTB(drive->ctl|0x80, IDE_CONTROL_REG); - high = ide_read_24(drive); - sectors = ((__u64)high << 24) | low; - printk(", LBAsect=%llu, high=%d, low=%d", - (unsigned long long) sectors, - high, low); - } else { - u8 sector, lcyl, hcyl, cur; - - sector = hwif->INB(IDE_SECTOR_REG); - lcyl = hwif->INB(IDE_LCYL_REG); - hcyl = hwif->INB(IDE_HCYL_REG); - cur = hwif->INB(IDE_SELECT_REG); - - if (cur & 0x40) { /* using LBA? */ - printk(", LBAsect=%ld", (unsigned long) - ((cur & 0xf) << 24) | - (hcyl << 16) | - (lcyl << 8) | - sector); - } else { - printk(", CHS=%d/%d/%d", - (hcyl << 8) + lcyl, - cur & 0xf, - sector); - } - } + ide_dump_sector(drive); if (HWGROUP(drive) && HWGROUP(drive)->rq) printk(", sector=%llu", (unsigned long long)HWGROUP(drive)->rq->sector); diff --git a/include/linux/ide.h b/include/linux/ide.h index c333a7528d94..67f98c096c03 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -913,6 +913,27 @@ enum { IDE_TFLAG_IN_DATA = (1 << 17), IDE_TFLAG_CUSTOM_HANDLER = (1 << 18), IDE_TFLAG_DMA_PIO_FALLBACK = (1 << 19), + IDE_TFLAG_IN_HOB_FEATURE = (1 << 20), + IDE_TFLAG_IN_HOB_NSECT = (1 << 21), + IDE_TFLAG_IN_HOB_LBAL = (1 << 22), + IDE_TFLAG_IN_HOB_LBAM = (1 << 23), + IDE_TFLAG_IN_HOB_LBAH = (1 << 24), + IDE_TFLAG_IN_HOB_LBA = IDE_TFLAG_IN_HOB_LBAL | + IDE_TFLAG_IN_HOB_LBAM | + IDE_TFLAG_IN_HOB_LBAH, + IDE_TFLAG_IN_HOB = IDE_TFLAG_IN_HOB_FEATURE | + IDE_TFLAG_IN_HOB_NSECT | + IDE_TFLAG_IN_HOB_LBA, + IDE_TFLAG_IN_NSECT = (1 << 25), + IDE_TFLAG_IN_LBAL = (1 << 26), + IDE_TFLAG_IN_LBAM = (1 << 27), + IDE_TFLAG_IN_LBAH = (1 << 28), + IDE_TFLAG_IN_LBA = IDE_TFLAG_IN_LBAL | + IDE_TFLAG_IN_LBAM | + IDE_TFLAG_IN_LBAH, + IDE_TFLAG_IN_TF = IDE_TFLAG_IN_NSECT | + IDE_TFLAG_IN_LBA, + IDE_TFLAG_IN_DEVICE = (1 << 29), }; struct ide_taskfile { @@ -956,8 +977,7 @@ typedef struct ide_task_s { } ide_task_t; void ide_tf_load(ide_drive_t *, ide_task_t *); - -extern u32 ide_read_24(ide_drive_t *); +void ide_tf_read(ide_drive_t *, ide_task_t *); extern void SELECT_DRIVE(ide_drive_t *); extern void SELECT_MASK(ide_drive_t *, int); -- cgit v1.2.3-59-g8ed1b From 1c904fcfbb0d8eef92ef42b1da378b4714143e46 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 25 Jan 2008 22:17:17 +0100 Subject: ide: printk fix power4: drivers/ide/ide-lib.c: In function `ide_dump_sector': drivers/ide/ide-lib.c:516: warning: long long unsigned int format, u64 arg (arg 2) We don't know what type is used to implement u64 hence it must always be cast when printed. Signed-off-by: Andrew Morton Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-lib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 15736d4ce9b4..d7503c489e99 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -509,7 +509,8 @@ static void ide_dump_sector(ide_drive_t *drive) ide_tf_read(drive, &task); if (lba48 || (tf->device & ATA_LBA)) - printk(", LBAsect=%llu", ide_get_lba_addr(tf, lba48)); + printk(", LBAsect=%llu", + (unsigned long long)ide_get_lba_addr(tf, lba48)); else printk(", CHS=%d/%d/%d", (tf->lbah << 8) + tf->lbam, tf->device & 0xf, tf->lbal); -- cgit v1.2.3-59-g8ed1b From a501633c7d44087e806597d3a213d735346edd51 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:17 +0100 Subject: ide-disk: use ide_get_lba_addr() * Export ide_get_lba_addr(). * Convert idedisk_{read_native,set}_max_address() to use ide_get_lba_addr(). * Remove incorrect comment from idedisk_read_native_max_address() (noticed by Sergei). There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 26 ++++---------------------- drivers/ide/ide-lib.c | 3 ++- include/linux/ide.h | 1 + 3 files changed, 7 insertions(+), 23 deletions(-) diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 3d7127ba67a0..d8fdd865dea9 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -326,18 +326,9 @@ static u64 idedisk_read_native_max_address(ide_drive_t *drive, int lba48) ide_no_data_taskfile(drive, &args); /* if OK, compute maximum address value */ - if ((tf->status & 0x01) == 0) { - u32 high, low; + if ((tf->status & 0x01) == 0) + addr = ide_get_lba_addr(tf, lba48) + 1; - if (lba48) - high = (tf->hob_lbah << 16) | (tf->hob_lbam << 8) | - tf->hob_lbal; - else - high = tf->device & 0xf; - low = (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal; - addr = ((__u64)high << 24) | low; - addr++; /* since the return value is (maxlba - 1), we add 1 */ - } return addr; } @@ -373,18 +364,9 @@ static u64 idedisk_set_max_address(ide_drive_t *drive, u64 addr_req, int lba48) /* submit command request */ ide_no_data_taskfile(drive, &args); /* if OK, compute maximum address value */ - if ((tf->status & 0x01) == 0) { - u32 high, low; + if ((tf->status & 0x01) == 0) + addr_set = ide_get_lba_addr(tf, lba48) + 1; - if (lba48) - high = (tf->hob_lbah << 16) | (tf->hob_lbam << 8) | - tf->hob_lbal; - else - high = tf->device & 0xf; - low = (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal; - addr_set = ((__u64)high << 24) | low; - addr_set++; - } return addr_set; } diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index d7503c489e99..6b2e810cb9e0 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -479,7 +479,7 @@ static void ide_dump_opcode(ide_drive_t *drive) printk("0x%02x\n", opcode); } -static u64 ide_get_lba_addr(struct ide_taskfile *tf, int lba48) +u64 ide_get_lba_addr(struct ide_taskfile *tf, int lba48) { u32 high, low; @@ -492,6 +492,7 @@ static u64 ide_get_lba_addr(struct ide_taskfile *tf, int lba48) return ((u64)high << 24) | low; } +EXPORT_SYMBOL_GPL(ide_get_lba_addr); static void ide_dump_sector(ide_drive_t *drive) { diff --git a/include/linux/ide.h b/include/linux/ide.h index 67f98c096c03..ecaa96e613dc 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1238,6 +1238,7 @@ static inline int ide_dev_is_sata(struct hd_driveid *id) return 0; } +u64 ide_get_lba_addr(struct ide_taskfile *, int); u8 ide_dump_status(ide_drive_t *, const char *, u8); typedef struct ide_pio_timings_s { -- cgit v1.2.3-59-g8ed1b From e62925dd26ef9594b8e4b9380b3211f6dae4ab96 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:17 +0100 Subject: ide: kill duplicate code in ide_dump_{ata,atapi}_status() * Move the common code from ide_dump_{ata,atapi}_status() to ide_dump_status(). * ide_dump_{ata,atapi}_status() -> ide_dump_{ata,atapi}_error(). There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-lib.c | 105 ++++++++++++++++++-------------------------------- 1 file changed, 37 insertions(+), 68 deletions(-) diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 6b2e810cb9e0..8649db33f67d 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -517,61 +517,51 @@ static void ide_dump_sector(ide_drive_t *drive) tf->device & 0xf, tf->lbal); } -static u8 ide_dump_ata_status(ide_drive_t *drive, const char *msg, u8 stat) +static void ide_dump_ata_error(ide_drive_t *drive, u8 err) { - ide_hwif_t *hwif = HWIF(drive); - unsigned long flags; - u8 err = 0; - - local_irq_save(flags); - printk("%s: %s: status=0x%02x { ", drive->name, msg, stat); - if (stat & BUSY_STAT) - printk("Busy "); - else { - if (stat & READY_STAT) printk("DriveReady "); - if (stat & WRERR_STAT) printk("DeviceFault "); - if (stat & SEEK_STAT) printk("SeekComplete "); - if (stat & DRQ_STAT) printk("DataRequest "); - if (stat & ECC_STAT) printk("CorrectedError "); - if (stat & INDEX_STAT) printk("Index "); - if (stat & ERR_STAT) printk("Error "); + printk("{ "); + if (err & ABRT_ERR) printk("DriveStatusError "); + if (err & ICRC_ERR) + printk((err & ABRT_ERR) ? "BadCRC " : "BadSector "); + if (err & ECC_ERR) printk("UncorrectableError "); + if (err & ID_ERR) printk("SectorIdNotFound "); + if (err & TRK0_ERR) printk("TrackZeroNotFound "); + if (err & MARK_ERR) printk("AddrMarkNotFound "); + printk("}"); + if ((err & (BBD_ERR | ABRT_ERR)) == BBD_ERR || + (err & (ECC_ERR|ID_ERR|MARK_ERR))) { + ide_dump_sector(drive); + if (HWGROUP(drive) && HWGROUP(drive)->rq) + printk(", sector=%llu", + (unsigned long long)HWGROUP(drive)->rq->sector); } + printk("\n"); +} + +static void ide_dump_atapi_error(ide_drive_t *drive, u8 err) +{ + printk("{ "); + if (err & ILI_ERR) printk("IllegalLengthIndication "); + if (err & EOM_ERR) printk("EndOfMedia "); + if (err & ABRT_ERR) printk("AbortedCommand "); + if (err & MCR_ERR) printk("MediaChangeRequested "); + if (err & LFS_ERR) printk("LastFailedSense=0x%02x ", + (err & LFS_ERR) >> 4); printk("}\n"); - if ((stat & (BUSY_STAT|ERR_STAT)) == ERR_STAT) { - err = hwif->INB(IDE_ERROR_REG); - printk("%s: %s: error=0x%02x { ", drive->name, msg, err); - if (err & ABRT_ERR) printk("DriveStatusError "); - if (err & ICRC_ERR) - printk((err & ABRT_ERR) ? "BadCRC " : "BadSector "); - if (err & ECC_ERR) printk("UncorrectableError "); - if (err & ID_ERR) printk("SectorIdNotFound "); - if (err & TRK0_ERR) printk("TrackZeroNotFound "); - if (err & MARK_ERR) printk("AddrMarkNotFound "); - printk("}"); - if ((err & (BBD_ERR | ABRT_ERR)) == BBD_ERR || - (err & (ECC_ERR|ID_ERR|MARK_ERR))) { - ide_dump_sector(drive); - if (HWGROUP(drive) && HWGROUP(drive)->rq) - printk(", sector=%llu", - (unsigned long long)HWGROUP(drive)->rq->sector); - } - printk("\n"); - } - ide_dump_opcode(drive); - local_irq_restore(flags); - return err; } /** - * ide_dump_atapi_status - print human readable atapi status + * ide_dump_status - translate ATA/ATAPI error * @drive: drive that status applies to * @msg: text message to print * @stat: status byte to decode * * Error reporting, in human readable form (luxurious, but a memory hog). + * Combines the drive name, message and status byte to provide a + * user understandable explanation of the device error. */ -static u8 ide_dump_atapi_status(ide_drive_t *drive, const char *msg, u8 stat) +u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat) { unsigned long flags; u8 err = 0; @@ -592,36 +582,15 @@ static u8 ide_dump_atapi_status(ide_drive_t *drive, const char *msg, u8 stat) printk("}\n"); if ((stat & (BUSY_STAT|ERR_STAT)) == ERR_STAT) { err = drive->hwif->INB(IDE_ERROR_REG); - printk("%s: %s: error=0x%02x { ", drive->name, msg, err); - if (err & ILI_ERR) printk("IllegalLengthIndication "); - if (err & EOM_ERR) printk("EndOfMedia "); - if (err & ABRT_ERR) printk("AbortedCommand "); - if (err & MCR_ERR) printk("MediaChangeRequested "); - if (err & LFS_ERR) printk("LastFailedSense=0x%02x ", - (err & LFS_ERR) >> 4); - printk("}\n"); + printk("%s: %s: error=0x%02x ", drive->name, msg, err); + if (drive->media == ide_disk) + ide_dump_ata_error(drive, err); + else + ide_dump_atapi_error(drive, err); } ide_dump_opcode(drive); local_irq_restore(flags); return err; } -/** - * ide_dump_status - translate ATA/ATAPI error - * @drive: drive the error occured on - * @msg: information string - * @stat: status byte - * - * Error reporting, in human readable form (luxurious, but a memory hog). - * Combines the drive name, message and status byte to provide a - * user understandable explanation of the device error. - */ - -u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat) -{ - if (drive->media == ide_disk) - return ide_dump_ata_status(drive, msg, stat); - return ide_dump_atapi_status(drive, msg, stat); -} - EXPORT_SYMBOL(ide_dump_status); -- cgit v1.2.3-59-g8ed1b From 3071a9d00b8684899d93f368e670c4de0293df29 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:17 +0100 Subject: ide: make 'extra' field in struct ide_port_info u8 The maximum value used currently for 'extra' field in struct ide_port_info is 240. Make 'extra' u8 so it packs nicely together with enablebits[] and 'chipset' fields (ide_pci_enablebit_t is 3 bytes and hwif_chipset_t is 1 byte). Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/ide.h b/include/linux/ide.h index ecaa96e613dc..6f5b6b5e9c1d 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1111,7 +1111,7 @@ struct ide_port_info { void (*fixup)(ide_hwif_t *); ide_pci_enablebit_t enablebits[2]; hwif_chipset_t chipset; - unsigned int extra; + u8 extra; u32 host_flags; u8 pio_mask; u8 swdma_mask; -- cgit v1.2.3-59-g8ed1b From ad4ba7dcef285c92a6856e0dd9feb780c1a79b87 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:18 +0100 Subject: pdc202xx_new: move PIO programming code to pdcnew_set_pio_mode() * Move PIO programming code from pdcnew_set_mode() to pdcnew_set_pio_mode(). * Rename pdcnew_set_mode() to pdcnew_set_dma_mode(). There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/pdc202xx_new.c | 26 ++++++++++---------------- 1 file changed, 10 insertions(+), 16 deletions(-) diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c index 2b4f44e45a1a..79ba8eff3644 100644 --- a/drivers/ide/pci/pdc202xx_new.c +++ b/drivers/ide/pci/pdc202xx_new.c @@ -146,7 +146,7 @@ static struct udma_timing { { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */ }; -static void pdcnew_set_mode(ide_drive_t *drive, const u8 speed) +static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed) { ide_hwif_t *hwif = HWIF(drive); u8 adj = (drive->dn & 1) ? 0x08 : 0x00; @@ -177,7 +177,6 @@ static void pdcnew_set_mode(ide_drive_t *drive, const u8 speed) set_indexed_reg(hwif, 0x12 + adj, udma_timings[mode].reg12); break; - case XFER_MW_DMA_2: case XFER_MW_DMA_1: case XFER_MW_DMA_0: @@ -186,18 +185,6 @@ static void pdcnew_set_mode(ide_drive_t *drive, const u8 speed) set_indexed_reg(hwif, 0x0f + adj, mwdma_timings[mode].reg0f); break; - case XFER_PIO_4: - case XFER_PIO_3: - case XFER_PIO_2: - case XFER_PIO_1: - case XFER_PIO_0: - set_indexed_reg(hwif, 0x0c + adj, - pio_timings[mode].reg0c); - set_indexed_reg(hwif, 0x0d + adj, - pio_timings[mode].reg0d); - set_indexed_reg(hwif, 0x13 + adj, - pio_timings[mode].reg13); - break; default: printk(KERN_ERR "pdc202xx_new: " "Unknown speed %d ignored\n", speed); @@ -212,7 +199,14 @@ static void pdcnew_set_mode(ide_drive_t *drive, const u8 speed) static void pdcnew_set_pio_mode(ide_drive_t *drive, const u8 pio) { - pdcnew_set_mode(drive, XFER_PIO_0 + pio); + ide_hwif_t *hwif = drive->hwif; + u8 adj = (drive->dn & 1) ? 0x08 : 0x00; + + if (max_dma_rate(hwif->pci_dev) == 4) { + set_indexed_reg(hwif, 0x0c + adj, pio_timings[pio].reg0c); + set_indexed_reg(hwif, 0x0d + adj, pio_timings[pio].reg0d); + set_indexed_reg(hwif, 0x13 + adj, pio_timings[pio].reg13); + } } static u8 pdcnew_cable_detect(ide_hwif_t *hwif) @@ -466,7 +460,7 @@ static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const cha static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif) { hwif->set_pio_mode = &pdcnew_set_pio_mode; - hwif->set_dma_mode = &pdcnew_set_mode; + hwif->set_dma_mode = &pdcnew_set_dma_mode; hwif->quirkproc = &pdcnew_quirkproc; hwif->resetproc = &pdcnew_reset; -- cgit v1.2.3-59-g8ed1b From 428c6440ef933a3d9df5adfeb2cbb3ea7ebb6a68 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:18 +0100 Subject: sis5513: factor out UDMA programming code * Factor out UDMA programming code from sis_set_dma_mode() to per chipset family helpers: sis_{ata33,ata133}_program_udma_timings(). * Add sis_program_udma_timings() helper. * Remove unneeded casts to 'unsigned long'. * Minor cleanups. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/sis5513.c | 78 +++++++++++++++++++++++++++-------------------- 1 file changed, 45 insertions(+), 33 deletions(-) diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index d90b42917775..3f35386d9cad 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -305,11 +305,52 @@ static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio) sis_program_timings(drive, XFER_PIO_0 + pio); } -static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void sis_ata133_program_udma_timings(ide_drive_t *drive, const u8 mode) { - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = hwif->pci_dev; + struct pci_dev *dev = drive->hwif->pci_dev; + u32 regdw = 0; + u8 drive_pci = sis_ata133_get_base(drive), clk, idx; + + pci_read_config_dword(dev, drive_pci, ®dw); + + regdw |= 0x04; + regdw &= 0xfffff00f; + /* check if ATA133 enable */ + clk = (regdw & 0x08) ? ATA_133 : ATA_100; + idx = mode - XFER_UDMA_0; + regdw |= cycle_time_value[clk][idx] << 4; + regdw |= cvs_time_value[clk][idx] << 8; + + pci_write_config_dword(dev, drive_pci, regdw); +} + +static void sis_ata33_program_udma_timings(ide_drive_t *drive, const u8 mode) +{ + struct pci_dev *dev = drive->hwif->pci_dev; + u8 drive_pci = 0x40 + drive->dn * 2, reg = 0, i = chipset_family; + + pci_read_config_byte(dev, drive_pci + 1, ®); + /* force the UDMA bit on if we want to use UDMA */ + reg |= 0x80; + /* clean reg cycle time bits */ + reg &= ~((0xff >> (8 - cycle_time_range[i])) << cycle_time_offset[i]); + /* set reg cycle time bits */ + reg |= cycle_time_value[i][mode - XFER_UDMA_0] << cycle_time_offset[i]; + + pci_write_config_byte(dev, drive_pci + 1, reg); +} + +static void sis_program_udma_timings(ide_drive_t *drive, const u8 mode) +{ + if (chipset_family >= ATA_133) /* ATA_133 */ + sis_ata133_program_udma_timings(drive, mode); + else /* ATA_33/66/100a/100/133a */ + sis_ata33_program_udma_timings(drive, mode); +} + +static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed) +{ /* Config chip for mode */ switch(speed) { case XFER_UDMA_6: @@ -319,36 +360,7 @@ static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed) case XFER_UDMA_2: case XFER_UDMA_1: case XFER_UDMA_0: - if (chipset_family >= ATA_133) { - u32 regdw = 0; - u8 drive_pci = sis_ata133_get_base(drive); - - pci_read_config_dword(dev, drive_pci, ®dw); - regdw |= 0x04; - regdw &= 0xfffff00f; - /* check if ATA133 enable */ - if (regdw & 0x08) { - regdw |= (unsigned long)cycle_time_value[ATA_133][speed-XFER_UDMA_0] << 4; - regdw |= (unsigned long)cvs_time_value[ATA_133][speed-XFER_UDMA_0] << 8; - } else { - regdw |= (unsigned long)cycle_time_value[ATA_100][speed-XFER_UDMA_0] << 4; - regdw |= (unsigned long)cvs_time_value[ATA_100][speed-XFER_UDMA_0] << 8; - } - pci_write_config_dword(dev, (unsigned long)drive_pci, regdw); - } else { - u8 drive_pci = 0x40 + drive->dn * 2, reg = 0; - - pci_read_config_byte(dev, drive_pci+1, ®); - /* Force the UDMA bit on if we want to use UDMA */ - reg |= 0x80; - /* clean reg cycle time bits */ - reg &= ~((0xFF >> (8 - cycle_time_range[chipset_family])) - << cycle_time_offset[chipset_family]); - /* set reg cycle time bits */ - reg |= cycle_time_value[chipset_family][speed-XFER_UDMA_0] - << cycle_time_offset[chipset_family]; - pci_write_config_byte(dev, drive_pci+1, reg); - } + sis_program_udma_timings(drive, speed); break; case XFER_MW_DMA_2: case XFER_MW_DMA_1: -- cgit v1.2.3-59-g8ed1b From 4db90a145292327b95b03f6dcd3352327235cc36 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:18 +0100 Subject: ide: add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag * Add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag and use it to decide what to do with transfer modes < XFER_PIO_0 in ide_set_xfer_rate(). * Set IDE_HFLAG_ABUSE_SET_DMA_MODE in host drivers that need it (aec62xx, amd74xx, cs5520, cs5535, hpt34x, hpt366, pdc202xx_old, serverworks, tc86c001 and via82cxxx) and cleanup ->set_dma_mode methods in host drivers that don't (IDE core code guarantees that ->set_dma_mode will be called only for modes which are present in SWDMA/MWDMA/UDMA masks). While at it: * Add IDE_HFLAGS_HPT34X/HPT3XX/PDC202XX/SVWKS define in hpt34x/hpt366/pdc202xx_old/serverworks host driver. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/arm/icside.c | 2 -- drivers/ide/cris/ide-cris.c | 2 -- drivers/ide/ide-lib.c | 6 ++++++ drivers/ide/mips/au1xxx-ide.c | 2 -- drivers/ide/pci/aec62xx.c | 13 ++++++++++--- drivers/ide/pci/alim15x3.c | 3 --- drivers/ide/pci/amd74xx.c | 1 + drivers/ide/pci/atiixp.c | 3 --- drivers/ide/pci/cmd64x.c | 2 -- drivers/ide/pci/cs5520.c | 1 + drivers/ide/pci/cs5530.c | 2 -- drivers/ide/pci/cs5535.c | 2 +- drivers/ide/pci/hpt34x.c | 12 +++++++----- drivers/ide/pci/hpt366.c | 19 +++++++++++-------- drivers/ide/pci/it8213.c | 21 ++++----------------- drivers/ide/pci/pdc202xx_new.c | 38 ++++++++++++-------------------------- drivers/ide/pci/pdc202xx_old.c | 12 +++++++----- drivers/ide/pci/piix.c | 17 ++++------------- drivers/ide/pci/sc1200.c | 2 -- drivers/ide/pci/scc_pata.c | 14 +------------- drivers/ide/pci/serverworks.c | 17 ++++++++++------- drivers/ide/pci/siimage.c | 29 ++++++++--------------------- drivers/ide/pci/sis5513.c | 23 ++++------------------- drivers/ide/pci/sl82c105.c | 40 ++++++++++++++++------------------------ drivers/ide/pci/slc90e66.c | 14 ++------------ drivers/ide/pci/tc86c001.c | 3 ++- drivers/ide/pci/triflex.c | 2 -- drivers/ide/pci/via82cxxx.c | 1 + drivers/ide/ppc/pmac.c | 42 ++++++++++++------------------------------ include/linux/ide.h | 1 + 30 files changed, 121 insertions(+), 225 deletions(-) diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c index 93f71fcfc04d..673402f4a295 100644 --- a/drivers/ide/arm/icside.c +++ b/drivers/ide/arm/icside.c @@ -272,8 +272,6 @@ static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode) case XFER_SW_DMA_0: cycle_time = 480; break; - default: - return; } /* diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c index 476e0d65ed43..325e608d9e62 100644 --- a/drivers/ide/cris/ide-cris.c +++ b/drivers/ide/cris/ide-cris.c @@ -747,8 +747,6 @@ static void cris_set_dma_mode(ide_drive_t *drive, const u8 speed) strobe = ATA_DMA2_STROBE; hold = ATA_DMA2_HOLD; break; - default: - return; } if (speed >= XFER_UDMA_0) diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 8649db33f67d..a3bd8e8ed6b0 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -441,6 +441,12 @@ int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) * case could happen iff the transfer mode has already been set on * the device by ide-proc.c::set_xfer_rate()). */ + if (rate < XFER_PIO_0) { + if (hwif->host_flags & IDE_HFLAG_ABUSE_SET_DMA_MODE) + return ide_set_dma_mode(drive, rate); + else + return ide_config_drive_speed(drive, rate); + } return ide_set_dma_mode(drive, rate); } diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index a4ce3ba15d61..a4d0d4ca73d0 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c @@ -198,8 +198,6 @@ static void auide_set_dma_mode(ide_drive_t *drive, const u8 speed) break; #endif - default: - return; } au_writel(mem_sttime,MEM_STTIME2); diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c index 44268504ae43..7f4d1857d555 100644 --- a/drivers/ide/pci/aec62xx.c +++ b/drivers/ide/pci/aec62xx.c @@ -202,6 +202,7 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = { .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_NO_ATAPI_DMA | + IDE_HFLAG_ABUSE_SET_DMA_MODE | IDE_HFLAG_OFF_BOARD, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, @@ -211,6 +212,7 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = { .init_chipset = init_chipset_aec62xx, .init_hwif = init_hwif_aec62xx, .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_NO_AUTODMA | + IDE_HFLAG_ABUSE_SET_DMA_MODE | IDE_HFLAG_OFF_BOARD, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, @@ -220,7 +222,8 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = { .init_chipset = init_chipset_aec62xx, .init_hwif = init_hwif_aec62xx, .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, - .host_flags = IDE_HFLAG_NO_ATAPI_DMA, + .host_flags = IDE_HFLAG_NO_ATAPI_DMA | + IDE_HFLAG_ABUSE_SET_DMA_MODE, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, @@ -228,7 +231,9 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = { .name = "AEC6280", .init_chipset = init_chipset_aec62xx, .init_hwif = init_hwif_aec62xx, - .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD, + .host_flags = IDE_HFLAG_NO_ATAPI_DMA | + IDE_HFLAG_ABUSE_SET_DMA_MODE | + IDE_HFLAG_OFF_BOARD, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, @@ -237,7 +242,9 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = { .init_chipset = init_chipset_aec62xx, .init_hwif = init_hwif_aec62xx, .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, - .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD, + .host_flags = IDE_HFLAG_NO_ATAPI_DMA | + IDE_HFLAG_ABUSE_SET_DMA_MODE | + IDE_HFLAG_OFF_BOARD, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index ce293936af4b..49aa82e412b6 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -402,9 +402,6 @@ static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed) u8 tmpbyte = 0x00; int m5229_udma = (hwif->channel) ? 0x57 : 0x56; - if (speed < XFER_PIO_0) - return; - if (speed == XFER_UDMA_6) speed1 = 0x47; diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index 8d4125ec252c..cee51fdafcf6 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -266,6 +266,7 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif) #define IDE_HFLAGS_AMD \ (IDE_HFLAG_PIO_NO_BLACKLIST | \ IDE_HFLAG_PIO_NO_DOWNGRADE | \ + IDE_HFLAG_ABUSE_SET_DMA_MODE | \ IDE_HFLAG_POST_SET_MODE | \ IDE_HFLAG_IO_32BIT | \ IDE_HFLAG_UNMASK_IRQS | \ diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c index ef8e0164ef7a..5ae26564fb72 100644 --- a/drivers/ide/pci/atiixp.c +++ b/drivers/ide/pci/atiixp.c @@ -133,9 +133,6 @@ static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed) u32 tmp32; u16 tmp16; - if (speed < XFER_MW_DMA_0) - return; - spin_lock_irqsave(&atiixp_lock, flags); save_mdma_mode[drive->dn] = 0; diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c index f3613bac9dbe..0b1e9479f019 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/pci/cmd64x.c @@ -322,8 +322,6 @@ static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed) case XFER_MW_DMA_0: program_cycle_times(drive, 480, 215); break; - default: - return; } if (speed >= XFER_SW_DMA_0) diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c index 0466462fd21b..d1a91bcb5b29 100644 --- a/drivers/ide/pci/cs5520.c +++ b/drivers/ide/pci/cs5520.c @@ -137,6 +137,7 @@ static void __devinit init_hwif_cs5520(ide_hwif_t *hwif) IDE_HFLAG_CS5520 | \ IDE_HFLAG_VDMA | \ IDE_HFLAG_NO_ATAPI_DMA | \ + IDE_HFLAG_ABUSE_SET_DMA_MODE |\ IDE_HFLAG_BOOTABLE, \ .pio_mask = ATA_PIO4, \ } diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c index 547690395eee..df5966b33460 100644 --- a/drivers/ide/pci/cs5530.c +++ b/drivers/ide/pci/cs5530.c @@ -116,8 +116,6 @@ static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode) case XFER_MW_DMA_0: timings = 0x00077771; break; case XFER_MW_DMA_1: timings = 0x00012121; break; case XFER_MW_DMA_2: timings = 0x00002020; break; - default: - return; } basereg = CS5530_BASEREG(drive->hwif); reg = inl(basereg + 4); /* get drive0 config register */ diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c index ddcbeba671e1..50b3d7791f55 100644 --- a/drivers/ide/pci/cs5535.c +++ b/drivers/ide/pci/cs5535.c @@ -190,7 +190,7 @@ static const struct ide_port_info cs5535_chipset __devinitdata = { .name = "CS5535", .init_hwif = init_hwif_cs5535, .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_POST_SET_MODE | - IDE_HFLAG_BOOTABLE, + IDE_HFLAG_ABUSE_SET_DMA_MODE | IDE_HFLAG_BOOTABLE, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c index ae6307fae4f9..dfba0d13fcd3 100644 --- a/drivers/ide/pci/hpt34x.c +++ b/drivers/ide/pci/hpt34x.c @@ -129,14 +129,18 @@ static void __devinit init_hwif_hpt34x(ide_hwif_t *hwif) hwif->set_dma_mode = &hpt34x_set_mode; } +#define IDE_HFLAGS_HPT34X \ + (IDE_HFLAG_NO_ATAPI_DMA | \ + IDE_HFLAG_ABUSE_SET_DMA_MODE | \ + IDE_HFLAG_NO_AUTODMA) + static const struct ide_port_info hpt34x_chipsets[] __devinitdata = { { /* 0 */ .name = "HPT343", .init_chipset = init_chipset_hpt34x, .init_hwif = init_hwif_hpt34x, .extra = 16, - .host_flags = IDE_HFLAG_NO_ATAPI_DMA | - IDE_HFLAG_NO_AUTODMA, + .host_flags = IDE_HFLAGS_HPT34X, .pio_mask = ATA_PIO5, }, { /* 1 */ @@ -144,9 +148,7 @@ static const struct ide_port_info hpt34x_chipsets[] __devinitdata = { .init_chipset = init_chipset_hpt34x, .init_hwif = init_hwif_hpt34x, .extra = 16, - .host_flags = IDE_HFLAG_NO_ATAPI_DMA | - IDE_HFLAG_NO_AUTODMA | - IDE_HFLAG_OFF_BOARD, + .host_flags = IDE_HFLAGS_HPT34X | IDE_HFLAG_OFF_BOARD, .pio_mask = ATA_PIO5, #ifdef CONFIG_HPT34X_AUTODMA .swdma_mask = ATA_SWDMA2, diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index 24d645751e0f..3777fb8c8043 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -1461,6 +1461,11 @@ static int __devinit hpt36x_init(struct pci_dev *dev, struct pci_dev *dev2) return 0; } +#define IDE_HFLAGS_HPT3XX \ + (IDE_HFLAG_NO_ATAPI_DMA | \ + IDE_HFLAG_ABUSE_SET_DMA_MODE | \ + IDE_HFLAG_OFF_BOARD) + static const struct ide_port_info hpt366_chipsets[] __devinitdata = { { /* 0 */ .name = "HPT36x", @@ -1475,9 +1480,7 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = { */ .enablebits = {{0x50,0x10,0x10}, {0x54,0x04,0x04}}, .extra = 240, - .host_flags = IDE_HFLAG_SINGLE | - IDE_HFLAG_NO_ATAPI_DMA | - IDE_HFLAG_OFF_BOARD, + .host_flags = IDE_HFLAGS_HPT3XX | IDE_HFLAG_SINGLE, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, },{ /* 1 */ @@ -1487,7 +1490,7 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = { .init_dma = init_dma_hpt366, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, .extra = 240, - .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD, + .host_flags = IDE_HFLAGS_HPT3XX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, },{ /* 2 */ @@ -1497,7 +1500,7 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = { .init_dma = init_dma_hpt366, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, .extra = 240, - .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD, + .host_flags = IDE_HFLAGS_HPT3XX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, },{ /* 3 */ @@ -1507,7 +1510,7 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = { .init_dma = init_dma_hpt366, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, .extra = 240, - .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD, + .host_flags = IDE_HFLAGS_HPT3XX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, },{ /* 4 */ @@ -1518,7 +1521,7 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = { .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, .udma_mask = ATA_UDMA5, .extra = 240, - .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD, + .host_flags = IDE_HFLAGS_HPT3XX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, },{ /* 5 */ @@ -1528,7 +1531,7 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = { .init_dma = init_dma_hpt366, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, .extra = 240, - .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD, + .host_flags = IDE_HFLAGS_HPT3XX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, } diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c index 90b52ed37bfc..2a0f45c4f4c4 100644 --- a/drivers/ide/pci/it8213.c +++ b/drivers/ide/pci/it8213.c @@ -101,24 +101,11 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed) pci_read_config_byte(dev, 0x54, ®54); pci_read_config_byte(dev, 0x55, ®55); - switch(speed) { - case XFER_UDMA_6: - case XFER_UDMA_4: - case XFER_UDMA_2: u_speed = 2 << (drive->dn * 4); break; - case XFER_UDMA_5: - case XFER_UDMA_3: - case XFER_UDMA_1: u_speed = 1 << (drive->dn * 4); break; - case XFER_UDMA_0: u_speed = 0 << (drive->dn * 4); break; - break; - case XFER_MW_DMA_2: - case XFER_MW_DMA_1: - case XFER_SW_DMA_2: - break; - default: - return; - } - if (speed >= XFER_UDMA_0) { + u8 udma = speed - XFER_UDMA_0; + + u_speed = min_t(u8, 2 - (udma & 1), udma) << (drive->dn * 4); + if (!(reg48 & u_flag)) pci_write_config_byte(dev, 0x48, reg48 | u_flag); if (speed >= XFER_UDMA_5) { diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c index 79ba8eff3644..ef4a99b99d1f 100644 --- a/drivers/ide/pci/pdc202xx_new.c +++ b/drivers/ide/pci/pdc202xx_new.c @@ -162,32 +162,18 @@ static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed) if (max_dma_rate(hwif->pci_dev) == 4) { u8 mode = speed & 0x07; - switch (speed) { - case XFER_UDMA_6: - case XFER_UDMA_5: - case XFER_UDMA_4: - case XFER_UDMA_3: - case XFER_UDMA_2: - case XFER_UDMA_1: - case XFER_UDMA_0: - set_indexed_reg(hwif, 0x10 + adj, - udma_timings[mode].reg10); - set_indexed_reg(hwif, 0x11 + adj, - udma_timings[mode].reg11); - set_indexed_reg(hwif, 0x12 + adj, - udma_timings[mode].reg12); - break; - case XFER_MW_DMA_2: - case XFER_MW_DMA_1: - case XFER_MW_DMA_0: - set_indexed_reg(hwif, 0x0e + adj, - mwdma_timings[mode].reg0e); - set_indexed_reg(hwif, 0x0f + adj, - mwdma_timings[mode].reg0f); - break; - default: - printk(KERN_ERR "pdc202xx_new: " - "Unknown speed %d ignored\n", speed); + if (speed >= XFER_UDMA_0) { + set_indexed_reg(hwif, 0x10 + adj, + udma_timings[mode].reg10); + set_indexed_reg(hwif, 0x11 + adj, + udma_timings[mode].reg11); + set_indexed_reg(hwif, 0x12 + adj, + udma_timings[mode].reg12); + } else { + set_indexed_reg(hwif, 0x0e + adj, + mwdma_timings[mode].reg0e); + set_indexed_reg(hwif, 0x0f + adj, + mwdma_timings[mode].reg0f); } } else if (speed == XFER_UDMA_2) { /* Set tHOLD bit to 0 if using UDMA mode 2 */ diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c index 22c7a7533b69..67b2781e2213 100644 --- a/drivers/ide/pci/pdc202xx_old.c +++ b/drivers/ide/pci/pdc202xx_old.c @@ -375,6 +375,11 @@ static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev, } } +#define IDE_HFLAGS_PDC202XX \ + (IDE_HFLAG_ERROR_STOPS_FIFO | \ + IDE_HFLAG_ABUSE_SET_DMA_MODE | \ + IDE_HFLAG_OFF_BOARD) + #define DECLARE_PDC2026X_DEV(name_str, udma, extra_flags) \ { \ .name = name_str, \ @@ -382,9 +387,7 @@ static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev, .init_hwif = init_hwif_pdc202xx, \ .init_dma = init_dma_pdc202xx, \ .extra = 48, \ - .host_flags = IDE_HFLAG_ERROR_STOPS_FIFO | \ - extra_flags | \ - IDE_HFLAG_OFF_BOARD, \ + .host_flags = IDE_HFLAGS_PDC202XX | extra_flags, \ .pio_mask = ATA_PIO4, \ .mwdma_mask = ATA_MWDMA2, \ .udma_mask = udma, \ @@ -397,8 +400,7 @@ static const struct ide_port_info pdc202xx_chipsets[] __devinitdata = { .init_hwif = init_hwif_pdc202xx, .init_dma = init_dma_pdc202xx, .extra = 16, - .host_flags = IDE_HFLAG_ERROR_STOPS_FIFO | - IDE_HFLAG_OFF_BOARD, + .host_flags = IDE_HFLAGS_PDC202XX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c index 27781d294cea..bd6d3f77d30c 100644 --- a/drivers/ide/pci/piix.c +++ b/drivers/ide/pci/piix.c @@ -203,20 +203,11 @@ static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed) pci_read_config_byte(dev, 0x54, ®54); pci_read_config_byte(dev, 0x55, ®55); - switch(speed) { - case XFER_UDMA_4: - case XFER_UDMA_2: u_speed = 2 << (drive->dn * 4); break; - case XFER_UDMA_5: - case XFER_UDMA_3: - case XFER_UDMA_1: u_speed = 1 << (drive->dn * 4); break; - case XFER_UDMA_0: u_speed = 0 << (drive->dn * 4); break; - case XFER_MW_DMA_2: - case XFER_MW_DMA_1: - case XFER_SW_DMA_2: break; - default: return; - } - if (speed >= XFER_UDMA_0) { + u8 udma = speed - XFER_UDMA_0; + + u_speed = min_t(u8, 2 - (udma & 1), udma) << (drive->dn * 4); + if (!(reg48 & u_flag)) pci_write_config_byte(dev, 0x48, reg48 | u_flag); if (speed == XFER_UDMA_5) { diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c index f0029b364c57..569a8fe70d3e 100644 --- a/drivers/ide/pci/sc1200.c +++ b/drivers/ide/pci/sc1200.c @@ -185,8 +185,6 @@ static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode) case PCI_CLK_66: timings = 0x00015151; break; } break; - default: - return; } if (unit == 0) { /* are we configuring drive0? */ diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index ebb7132b9b84..24a85bbcd2a6 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -254,19 +254,7 @@ static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed) offset = 0; /* 100MHz */ } - switch (speed) { - case XFER_UDMA_6: - case XFER_UDMA_5: - case XFER_UDMA_4: - case XFER_UDMA_3: - case XFER_UDMA_2: - case XFER_UDMA_1: - case XFER_UDMA_0: - idx = speed - XFER_UDMA_0; - break; - default: - return; - } + idx = speed - XFER_UDMA_0; jcactsel = JCACTSELtbl[offset][idx]; if (is_slave) { diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c index a7280311357b..e9bd269547bb 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/pci/serverworks.c @@ -366,12 +366,17 @@ static void __devinit init_hwif_svwks (ide_hwif_t *hwif) } } +#define IDE_HFLAGS_SVWKS \ + (IDE_HFLAG_LEGACY_IRQS | \ + IDE_HFLAG_ABUSE_SET_DMA_MODE | \ + IDE_HFLAG_BOOTABLE) + static const struct ide_port_info serverworks_chipsets[] __devinitdata = { { /* 0 */ .name = "SvrWks OSB4", .init_chipset = init_chipset_svwks, .init_hwif = init_hwif_svwks, - .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE, + .host_flags = IDE_HFLAGS_SVWKS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = 0x00, /* UDMA is problematic on OSB4 */ @@ -379,7 +384,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = { .name = "SvrWks CSB5", .init_chipset = init_chipset_svwks, .init_hwif = init_hwif_svwks, - .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE, + .host_flags = IDE_HFLAGS_SVWKS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, @@ -387,7 +392,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = { .name = "SvrWks CSB6", .init_chipset = init_chipset_svwks, .init_hwif = init_hwif_svwks, - .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE, + .host_flags = IDE_HFLAGS_SVWKS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, @@ -395,8 +400,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = { .name = "SvrWks CSB6", .init_chipset = init_chipset_svwks, .init_hwif = init_hwif_svwks, - .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_SINGLE | - IDE_HFLAG_BOOTABLE, + .host_flags = IDE_HFLAGS_SVWKS | IDE_HFLAG_SINGLE, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, @@ -404,8 +408,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = { .name = "SvrWks HT1000", .init_chipset = init_chipset_svwks, .init_hwif = init_hwif_svwks, - .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_SINGLE | - IDE_HFLAG_BOOTABLE, + .host_flags = IDE_HFLAGS_SVWKS | IDE_HFLAG_SINGLE, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index 5709c252543b..7b45eaf5afd9 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -278,27 +278,14 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed) scsc = is_sata(hwif) ? 1 : scsc; - switch(speed) { - case XFER_MW_DMA_2: - case XFER_MW_DMA_1: - case XFER_MW_DMA_0: - multi = dma[speed - XFER_MW_DMA_0]; - mode |= ((unit) ? 0x20 : 0x02); - break; - case XFER_UDMA_6: - case XFER_UDMA_5: - case XFER_UDMA_4: - case XFER_UDMA_3: - case XFER_UDMA_2: - case XFER_UDMA_1: - case XFER_UDMA_0: - multi = dma[2]; - ultra |= ((scsc) ? (ultra6[speed - XFER_UDMA_0]) : - (ultra5[speed - XFER_UDMA_0])); - mode |= ((unit) ? 0x30 : 0x03); - break; - default: - return; + if (speed >= XFER_UDMA_0) { + multi = dma[2]; + ultra |= (scsc ? ultra6[speed - XFER_UDMA_0] : + ultra5[speed - XFER_UDMA_0]); + mode |= (unit ? 0x30 : 0x03); + } else { + multi = dma[speed - XFER_MW_DMA_0]; + mode |= (unit ? 0x20 : 0x02); } if (hwif->mmio) { diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index 3f35386d9cad..85d36996e6af 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -351,25 +351,10 @@ static void sis_program_udma_timings(ide_drive_t *drive, const u8 mode) static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed) { - /* Config chip for mode */ - switch(speed) { - case XFER_UDMA_6: - case XFER_UDMA_5: - case XFER_UDMA_4: - case XFER_UDMA_3: - case XFER_UDMA_2: - case XFER_UDMA_1: - case XFER_UDMA_0: - sis_program_udma_timings(drive, speed); - break; - case XFER_MW_DMA_2: - case XFER_MW_DMA_1: - case XFER_MW_DMA_0: - sis_program_timings(drive, speed); - break; - default: - break; - } + if (speed >= XFER_UDMA_0) + sis_program_udma_timings(drive, speed); + else + sis_program_timings(drive, speed); } static u8 sis5513_ata133_udma_filter(ide_drive_t *drive) diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c index 147d783f7529..069f104fdcea 100644 --- a/drivers/ide/pci/sl82c105.c +++ b/drivers/ide/pci/sl82c105.c @@ -115,32 +115,24 @@ static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed) DBG(("sl82c105_tune_chipset(drive:%s, speed:%s)\n", drive->name, ide_xfer_verbose(speed))); - switch (speed) { - case XFER_MW_DMA_2: - case XFER_MW_DMA_1: - case XFER_MW_DMA_0: - drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0]; + drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0]; - /* - * Store the DMA timings so that we can actually program - * them when DMA will be turned on... - */ - drive->drive_data &= 0x0000ffff; - drive->drive_data |= (unsigned long)drv_ctrl << 16; + /* + * Store the DMA timings so that we can actually program + * them when DMA will be turned on... + */ + drive->drive_data &= 0x0000ffff; + drive->drive_data |= (unsigned long)drv_ctrl << 16; - /* - * If we are already using DMA, we just reprogram - * the drive control register. - */ - if (drive->using_dma) { - struct pci_dev *dev = HWIF(drive)->pci_dev; - int reg = 0x44 + drive->dn * 4; - - pci_write_config_word(dev, reg, drv_ctrl); - } - break; - default: - return; + /* + * If we are already using DMA, we just reprogram + * the drive control register. + */ + if (drive->using_dma) { + struct pci_dev *dev = HWIF(drive)->pci_dev; + int reg = 0x44 + drive->dn * 4; + + pci_write_config_word(dev, reg, drv_ctrl); } } diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c index eb4445b229ed..dbbb46819a2d 100644 --- a/drivers/ide/pci/slc90e66.c +++ b/drivers/ide/pci/slc90e66.c @@ -91,19 +91,9 @@ static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed) pci_read_config_word(dev, 0x48, ®48); pci_read_config_word(dev, 0x4a, ®4a); - switch(speed) { - case XFER_UDMA_4: u_speed = 4 << (drive->dn * 4); break; - case XFER_UDMA_3: u_speed = 3 << (drive->dn * 4); break; - case XFER_UDMA_2: u_speed = 2 << (drive->dn * 4); break; - case XFER_UDMA_1: u_speed = 1 << (drive->dn * 4); break; - case XFER_UDMA_0: u_speed = 0 << (drive->dn * 4); break; - case XFER_MW_DMA_2: - case XFER_MW_DMA_1: - case XFER_SW_DMA_2: break; - default: return; - } - if (speed >= XFER_UDMA_0) { + u_speed = (speed - XFER_UDMA_0) << (drive->dn * 4); + if (!(reg48 & u_flag)) pci_write_config_word(dev, 0x48, reg48|u_flag); /* FIXME: (reg4a & a_speed) ? */ diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c index a66ebd14664e..e1faf6c2fe16 100644 --- a/drivers/ide/pci/tc86c001.c +++ b/drivers/ide/pci/tc86c001.c @@ -222,7 +222,8 @@ static const struct ide_port_info tc86c001_chipset __devinitdata = { .name = "TC86C001", .init_chipset = init_chipset_tc86c001, .init_hwif = init_hwif_tc86c001, - .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_OFF_BOARD, + .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_OFF_BOARD | + IDE_HFLAG_ABUSE_SET_DMA_MODE, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c index a227c41d23a3..ae52a96a1cf9 100644 --- a/drivers/ide/pci/triflex.c +++ b/drivers/ide/pci/triflex.c @@ -81,8 +81,6 @@ static void triflex_set_mode(ide_drive_t *drive, const u8 speed) case XFER_PIO_0: timing = 0x0808; break; - default: - return; } triflex_timings &= ~(0xFFFF << (16 * unit)); diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index a0d3c16b68ec..4b32c90f4896 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -439,6 +439,7 @@ static const struct ide_port_info via82cxxx_chipset __devinitdata = { .enablebits = { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } }, .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST | IDE_HFLAG_PIO_NO_DOWNGRADE | + IDE_HFLAG_ABUSE_SET_DMA_MODE | IDE_HFLAG_POST_SET_MODE | IDE_HFLAG_IO_32BIT | IDE_HFLAG_BOOTABLE, diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 4559e29446e9..3dce80092fff 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -828,38 +828,20 @@ static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed) tl[0] = *timings; tl[1] = *timings2; - switch(speed) { #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC - case XFER_UDMA_6: - case XFER_UDMA_5: - case XFER_UDMA_4: - case XFER_UDMA_3: - case XFER_UDMA_2: - case XFER_UDMA_1: - case XFER_UDMA_0: - if (pmif->kind == controller_kl_ata4) - ret = set_timings_udma_ata4(&tl[0], speed); - else if (pmif->kind == controller_un_ata6 - || pmif->kind == controller_k2_ata6) - ret = set_timings_udma_ata6(&tl[0], &tl[1], speed); - else if (pmif->kind == controller_sh_ata6) - ret = set_timings_udma_shasta(&tl[0], &tl[1], speed); - else - ret = 1; - break; - case XFER_MW_DMA_2: - case XFER_MW_DMA_1: - case XFER_MW_DMA_0: - set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed); - break; - case XFER_SW_DMA_2: - case XFER_SW_DMA_1: - case XFER_SW_DMA_0: - return; + if (speed >= XFER_UDMA_0) { + if (pmif->kind == controller_kl_ata4) + ret = set_timings_udma_ata4(&tl[0], speed); + else if (pmif->kind == controller_un_ata6 + || pmif->kind == controller_k2_ata6) + ret = set_timings_udma_ata6(&tl[0], &tl[1], speed); + else if (pmif->kind == controller_sh_ata6) + ret = set_timings_udma_shasta(&tl[0], &tl[1], speed); + else + ret = -1; + } else + set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed); #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ - default: - ret = 1; - } if (ret) return; diff --git a/include/linux/ide.h b/include/linux/ide.h index 6f5b6b5e9c1d..1e4409937ec3 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1094,6 +1094,7 @@ enum { IDE_HFLAG_IO_32BIT = (1 << 24), /* unmask IRQs */ IDE_HFLAG_UNMASK_IRQS = (1 << 25), + IDE_HFLAG_ABUSE_SET_DMA_MODE = (1 << 26), }; #ifdef CONFIG_BLK_DEV_OFFBOARD -- cgit v1.2.3-59-g8ed1b From 4eed504d140319d6c1c7e0a5b7a9bf41dabf7cea Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:18 +0100 Subject: sc1200: move DMA timings to timing tables Based on pata_sc1200.c. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/sc1200.c | 62 +++++++++++++----------------------------------- 1 file changed, 17 insertions(+), 45 deletions(-) diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c index 569a8fe70d3e..fef20bd4aa78 100644 --- a/drivers/ide/pci/sc1200.c +++ b/drivers/ide/pci/sc1200.c @@ -135,57 +135,29 @@ static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode) unsigned short pci_clock; unsigned int basereg = hwif->channel ? 0x50 : 0x40; + static const u32 udma_timing[3][3] = { + { 0x00921250, 0x00911140, 0x00911030 }, + { 0x00932470, 0x00922260, 0x00922140 }, + { 0x009436a1, 0x00933481, 0x00923261 }, + }; + + static const u32 mwdma_timing[3][3] = { + { 0x00077771, 0x00012121, 0x00002020 }, + { 0x000bbbb2, 0x00024241, 0x00013131 }, + { 0x000ffff3, 0x00035352, 0x00015151 }, + }; + pci_clock = sc1200_get_pci_clock(); /* * Note that each DMA mode has several timings associated with it. * The correct timing depends on the fast PCI clock freq. */ - timings = 0; - switch (mode) { - case XFER_UDMA_0: - switch (pci_clock) { - case PCI_CLK_33: timings = 0x00921250; break; - case PCI_CLK_48: timings = 0x00932470; break; - case PCI_CLK_66: timings = 0x009436a1; break; - } - break; - case XFER_UDMA_1: - switch (pci_clock) { - case PCI_CLK_33: timings = 0x00911140; break; - case PCI_CLK_48: timings = 0x00922260; break; - case PCI_CLK_66: timings = 0x00933481; break; - } - break; - case XFER_UDMA_2: - switch (pci_clock) { - case PCI_CLK_33: timings = 0x00911030; break; - case PCI_CLK_48: timings = 0x00922140; break; - case PCI_CLK_66: timings = 0x00923261; break; - } - break; - case XFER_MW_DMA_0: - switch (pci_clock) { - case PCI_CLK_33: timings = 0x00077771; break; - case PCI_CLK_48: timings = 0x000bbbb2; break; - case PCI_CLK_66: timings = 0x000ffff3; break; - } - break; - case XFER_MW_DMA_1: - switch (pci_clock) { - case PCI_CLK_33: timings = 0x00012121; break; - case PCI_CLK_48: timings = 0x00024241; break; - case PCI_CLK_66: timings = 0x00035352; break; - } - break; - case XFER_MW_DMA_2: - switch (pci_clock) { - case PCI_CLK_33: timings = 0x00002020; break; - case PCI_CLK_48: timings = 0x00013131; break; - case PCI_CLK_66: timings = 0x00015151; break; - } - break; - } + + if (mode >= XFER_UDMA_0) + timings = udma_timing[pci_clock][mode - XFER_UDMA_0]; + else + timings = mwdma_timing[pci_clock][mode - XFER_MW_DMA_0]; if (unit == 0) { /* are we configuring drive0? */ pci_read_config_dword(hwif->pci_dev, basereg+4, ®); -- cgit v1.2.3-59-g8ed1b From 23b1bd459c9e8a925381960f0b69ac85468c3af1 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:19 +0100 Subject: ide: remove redundant ->ide_dma_on call from set_using_dma() ide_set_dma() calls ->ide_dma_on method itself and returns zero only if ->ide_dma_on call succeeded. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 4acd87e92cca..00ef6ec2c273 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -852,7 +852,7 @@ int set_using_dma(ide_drive_t *drive, int arg) if (arg) { hwif->dma_off_quietly(drive); - if (ide_set_dma(drive) || hwif->ide_dma_on(drive)) + if (ide_set_dma(drive)) err = -EIO; } else ide_dma_off(drive); -- cgit v1.2.3-59-g8ed1b From 7b905994ce0bd332afc5ebc30ce9afa60d23c6e2 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:19 +0100 Subject: ide: cleanup ide_set_dma() * ->dma_off_quietly is always called before ide_set_dma() so the call can be moved inside ide_set_dma(). * ide_dma_check() doesn't touch hardware so ->dma_off_quietly call for 'rc == -1' case is redundant, remove it. * '0' and '-1' are the only values returned by ide_dma_check() so remove dead code for other cases. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-dma.c | 25 +++++++++++-------------- drivers/ide/ide-io.c | 1 - drivers/ide/ide-probe.c | 10 +--------- drivers/ide/ide.c | 1 - 4 files changed, 12 insertions(+), 25 deletions(-) diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 7568c3e81f2f..01036305d6fc 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -827,22 +827,19 @@ int ide_set_dma(ide_drive_t *drive) ide_hwif_t *hwif = drive->hwif; int rc; - rc = ide_dma_check(drive); + /* + * Force DMAing for the beginning of the check. + * Some chipsets appear to do interesting + * things, if not checked and cleared. + * PARANOIA!!! + */ + hwif->dma_off_quietly(drive); - switch(rc) { - case -1: /* DMA needs to be disabled */ - hwif->dma_off_quietly(drive); - return -1; - case 0: /* DMA needs to be enabled */ - return hwif->ide_dma_on(drive); - case 1: /* DMA setting cannot be changed */ - break; - default: - BUG(); - break; - } + rc = ide_dma_check(drive); + if (rc) + return rc; - return rc; + return hwif->ide_dma_on(drive); } #ifdef CONFIG_BLK_DEV_IDEDMA_PCI diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index e053e00a7058..2711b5a6962d 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -221,7 +221,6 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * */ if (drive->hwif->ide_dma_on == NULL) break; - drive->hwif->dma_off_quietly(drive); /* * TODO: respect ->using_dma setting */ diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 33e62d28465d..0379d1f697cf 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -833,16 +833,8 @@ static void probe_hwif(ide_hwif_t *hwif) drive->nice1 = 1; - if (hwif->ide_dma_on) { - /* - * Force DMAing for the beginning of the check. - * Some chipsets appear to do interesting - * things, if not checked and cleared. - * PARANOIA!!! - */ - hwif->dma_off_quietly(drive); + if (hwif->ide_dma_on) ide_set_dma(drive); - } } } diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 00ef6ec2c273..c6d4f630e18a 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -851,7 +851,6 @@ int set_using_dma(ide_drive_t *drive, int arg) err = 0; if (arg) { - hwif->dma_off_quietly(drive); if (ide_set_dma(drive)) err = -EIO; } else -- cgit v1.2.3-59-g8ed1b From 61a368c216897aa3bbee35b3f2e6db76ec73fad0 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:19 +0100 Subject: ide: remove redundant DMA blacklist check from __ide_dma_on() ->ide_dma_on method is called only after successful ide_dma_check() call (ide_dma_check()->ide_tune_dma() checks DMA blacklist) or if drive->using_dma has been previously enabled for a given device (->ide_dma_on is the only place which sets drive->using_dma to '1'). There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-dma.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 01036305d6fc..18c78ad2b31e 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -491,10 +491,6 @@ EXPORT_SYMBOL(ide_dma_host_on); int __ide_dma_on (ide_drive_t *drive) { - /* consult the list of known "bad" drives */ - if (__ide_dma_bad_drive(drive)) - return 1; - drive->using_dma = 1; ide_toggle_bounce(drive, 1); -- cgit v1.2.3-59-g8ed1b From 657c2f2cbccbac88689ac5174fc13dd3f9aece34 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 25 Jan 2008 14:15:21 -0800 Subject: IB/ipath: Fix crash on unload introduced by sysfs changes Commit 23b9c1ab ("Infiniband: make ipath driver use default driver groups.") introduced a bug in the ipath driver where ipath_device_create_group() fell through into the error path, even on success, which meant that the sysfs groups it created would always get removed right away. This made ipath_device_remove_group() hit the BUG_ON() in sysfs_remove_group() when it tried to remove those groups a second time. Correct the return path so that the groups stick around until they are supposed to be cleaned up. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_sysfs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/ipath/ipath_sysfs.c b/drivers/infiniband/hw/ipath/ipath_sysfs.c index aa27ca9f03b1..e2a65349c824 100644 --- a/drivers/infiniband/hw/ipath/ipath_sysfs.c +++ b/drivers/infiniband/hw/ipath/ipath_sysfs.c @@ -770,7 +770,8 @@ int ipath_device_create_group(struct device *dev, struct ipath_devdata *dd) if (ret) goto bail_attrs; - sysfs_remove_group(&dev->kobj, &dev_counter_attr_group); + return 0; + bail_attrs: sysfs_remove_group(&dev->kobj, &dev_attr_group); bail: -- cgit v1.2.3-59-g8ed1b From 2337f80941ac22f747ce6fd2c7a79e91d911a3ce Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 23 Oct 2007 19:57:54 -0700 Subject: IPoIB: Trivial formatting cleanups Fix whitespace blunders, convert "foo* bar" to "foo *bar", etc. Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib.h | 152 ++++++++++++------------- drivers/infiniband/ulp/ipoib/ipoib_cm.c | 48 ++++---- drivers/infiniband/ulp/ipoib/ipoib_ib.c | 8 +- drivers/infiniband/ulp/ipoib/ipoib_main.c | 38 +++---- drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 4 +- drivers/infiniband/ulp/ipoib/ipoib_verbs.c | 10 +- 6 files changed, 130 insertions(+), 130 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index eb7edab0e836..a376fb6ffa0e 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -56,42 +56,42 @@ /* constants */ enum { - IPOIB_PACKET_SIZE = 2048, - IPOIB_BUF_SIZE = IPOIB_PACKET_SIZE + IB_GRH_BYTES, + IPOIB_PACKET_SIZE = 2048, + IPOIB_BUF_SIZE = IPOIB_PACKET_SIZE + IB_GRH_BYTES, - IPOIB_ENCAP_LEN = 4, + IPOIB_ENCAP_LEN = 4, - IPOIB_CM_MTU = 0x10000 - 0x10, /* padding to align header to 16 */ - IPOIB_CM_BUF_SIZE = IPOIB_CM_MTU + IPOIB_ENCAP_LEN, - IPOIB_CM_HEAD_SIZE = IPOIB_CM_BUF_SIZE % PAGE_SIZE, - IPOIB_CM_RX_SG = ALIGN(IPOIB_CM_BUF_SIZE, PAGE_SIZE) / PAGE_SIZE, - IPOIB_RX_RING_SIZE = 128, - IPOIB_TX_RING_SIZE = 64, + IPOIB_CM_MTU = 0x10000 - 0x10, /* padding to align header to 16 */ + IPOIB_CM_BUF_SIZE = IPOIB_CM_MTU + IPOIB_ENCAP_LEN, + IPOIB_CM_HEAD_SIZE = IPOIB_CM_BUF_SIZE % PAGE_SIZE, + IPOIB_CM_RX_SG = ALIGN(IPOIB_CM_BUF_SIZE, PAGE_SIZE) / PAGE_SIZE, + IPOIB_RX_RING_SIZE = 128, + IPOIB_TX_RING_SIZE = 64, IPOIB_MAX_QUEUE_SIZE = 8192, IPOIB_MIN_QUEUE_SIZE = 2, - IPOIB_NUM_WC = 4, + IPOIB_NUM_WC = 4, IPOIB_MAX_PATH_REC_QUEUE = 3, - IPOIB_MAX_MCAST_QUEUE = 3, - - IPOIB_FLAG_OPER_UP = 0, - IPOIB_FLAG_INITIALIZED = 1, - IPOIB_FLAG_ADMIN_UP = 2, - IPOIB_PKEY_ASSIGNED = 3, - IPOIB_PKEY_STOP = 4, - IPOIB_FLAG_SUBINTERFACE = 5, - IPOIB_MCAST_RUN = 6, - IPOIB_STOP_REAPER = 7, - IPOIB_MCAST_STARTED = 8, - IPOIB_FLAG_ADMIN_CM = 9, + IPOIB_MAX_MCAST_QUEUE = 3, + + IPOIB_FLAG_OPER_UP = 0, + IPOIB_FLAG_INITIALIZED = 1, + IPOIB_FLAG_ADMIN_UP = 2, + IPOIB_PKEY_ASSIGNED = 3, + IPOIB_PKEY_STOP = 4, + IPOIB_FLAG_SUBINTERFACE = 5, + IPOIB_MCAST_RUN = 6, + IPOIB_STOP_REAPER = 7, + IPOIB_MCAST_STARTED = 8, + IPOIB_FLAG_ADMIN_CM = 9, IPOIB_FLAG_UMCAST = 10, IPOIB_MAX_BACKOFF_SECONDS = 16, - IPOIB_MCAST_FLAG_FOUND = 0, /* used in set_multicast_list */ + IPOIB_MCAST_FLAG_FOUND = 0, /* used in set_multicast_list */ IPOIB_MCAST_FLAG_SENDONLY = 1, - IPOIB_MCAST_FLAG_BUSY = 2, /* joining or already joined */ + IPOIB_MCAST_FLAG_BUSY = 2, /* joining or already joined */ IPOIB_MCAST_FLAG_ATTACHED = 3, }; @@ -117,7 +117,7 @@ struct ipoib_pseudoheader { struct ipoib_mcast { struct ib_sa_mcmember_rec mcmember; struct ib_sa_multicast *mc; - struct ipoib_ah *ah; + struct ipoib_ah *ah; struct rb_node rb_node; struct list_head list; @@ -186,27 +186,27 @@ enum ipoib_cm_state { }; struct ipoib_cm_rx { - struct ib_cm_id *id; - struct ib_qp *qp; - struct list_head list; - struct net_device *dev; - unsigned long jiffies; - enum ipoib_cm_state state; + struct ib_cm_id *id; + struct ib_qp *qp; + struct list_head list; + struct net_device *dev; + unsigned long jiffies; + enum ipoib_cm_state state; }; struct ipoib_cm_tx { - struct ib_cm_id *id; - struct ib_qp *qp; + struct ib_cm_id *id; + struct ib_qp *qp; struct list_head list; struct net_device *dev; struct ipoib_neigh *neigh; struct ipoib_path *path; struct ipoib_tx_buf *tx_ring; - unsigned tx_head; - unsigned tx_tail; - unsigned long flags; - u32 mtu; - struct ib_wc ibwc[IPOIB_NUM_WC]; + unsigned tx_head; + unsigned tx_tail; + unsigned long flags; + u32 mtu; + struct ib_wc ibwc[IPOIB_NUM_WC]; }; struct ipoib_cm_rx_buf { @@ -215,24 +215,24 @@ struct ipoib_cm_rx_buf { }; struct ipoib_cm_dev_priv { - struct ib_srq *srq; + struct ib_srq *srq; struct ipoib_cm_rx_buf *srq_ring; - struct ib_cm_id *id; - struct list_head passive_ids; /* state: LIVE */ - struct list_head rx_error_list; /* state: ERROR */ - struct list_head rx_flush_list; /* state: FLUSH, drain not started */ - struct list_head rx_drain_list; /* state: FLUSH, drain started */ - struct list_head rx_reap_list; /* state: FLUSH, drain done */ + struct ib_cm_id *id; + struct list_head passive_ids; /* state: LIVE */ + struct list_head rx_error_list; /* state: ERROR */ + struct list_head rx_flush_list; /* state: FLUSH, drain not started */ + struct list_head rx_drain_list; /* state: FLUSH, drain started */ + struct list_head rx_reap_list; /* state: FLUSH, drain done */ struct work_struct start_task; struct work_struct reap_task; struct work_struct skb_task; struct work_struct rx_reap_task; struct delayed_work stale_task; struct sk_buff_head skb_queue; - struct list_head start_list; - struct list_head reap_list; - struct ib_wc ibwc[IPOIB_NUM_WC]; - struct ib_sge rx_sge[IPOIB_CM_RX_SG]; + struct list_head start_list; + struct list_head reap_list; + struct ib_wc ibwc[IPOIB_NUM_WC]; + struct ib_sge rx_sge[IPOIB_CM_RX_SG]; struct ib_recv_wr rx_wr; }; @@ -269,30 +269,30 @@ struct ipoib_dev_priv { struct work_struct pkey_event_task; struct ib_device *ca; - u8 port; - u16 pkey; - u16 pkey_index; - struct ib_pd *pd; - struct ib_mr *mr; - struct ib_cq *cq; - struct ib_qp *qp; - u32 qkey; + u8 port; + u16 pkey; + u16 pkey_index; + struct ib_pd *pd; + struct ib_mr *mr; + struct ib_cq *cq; + struct ib_qp *qp; + u32 qkey; union ib_gid local_gid; - u16 local_lid; + u16 local_lid; unsigned int admin_mtu; unsigned int mcast_mtu; struct ipoib_rx_buf *rx_ring; - spinlock_t tx_lock; + spinlock_t tx_lock; struct ipoib_tx_buf *tx_ring; - unsigned tx_head; - unsigned tx_tail; - struct ib_sge tx_sge; + unsigned tx_head; + unsigned tx_tail; + struct ib_sge tx_sge; struct ib_send_wr tx_wr; - unsigned tx_outstanding; + unsigned tx_outstanding; struct ib_wc ibwc[IPOIB_NUM_WC]; @@ -317,10 +317,10 @@ struct ipoib_dev_priv { struct ipoib_ah { struct net_device *dev; - struct ib_ah *ah; + struct ib_ah *ah; struct list_head list; - struct kref ref; - unsigned last_send; + struct kref ref; + unsigned last_send; }; struct ipoib_path { @@ -331,11 +331,11 @@ struct ipoib_path { struct list_head neigh_list; - int query_id; + int query_id; struct ib_sa_query *query; struct completion done; - struct rb_node rb_node; + struct rb_node rb_node; struct list_head list; }; @@ -344,7 +344,7 @@ struct ipoib_neigh { #ifdef CONFIG_INFINIBAND_IPOIB_CM struct ipoib_cm_tx *cm; #endif - union ib_gid dgid; + union ib_gid dgid; struct sk_buff_head queue; struct neighbour *neighbour; @@ -455,8 +455,8 @@ void ipoib_drain_cq(struct net_device *dev); #ifdef CONFIG_INFINIBAND_IPOIB_CM -#define IPOIB_FLAGS_RC 0x80 -#define IPOIB_FLAGS_UC 0x40 +#define IPOIB_FLAGS_RC 0x80 +#define IPOIB_FLAGS_UC 0x40 /* We don't support UC connections at the moment */ #define IPOIB_CM_SUPPORTED(ha) (ha[0] & (IPOIB_FLAGS_RC)) @@ -500,7 +500,7 @@ void ipoib_cm_dev_cleanup(struct net_device *dev); struct ipoib_cm_tx *ipoib_cm_create_tx(struct net_device *dev, struct ipoib_path *path, struct ipoib_neigh *neigh); void ipoib_cm_destroy_tx(struct ipoib_cm_tx *tx); -void ipoib_cm_skb_too_long(struct net_device* dev, struct sk_buff *skb, +void ipoib_cm_skb_too_long(struct net_device *dev, struct sk_buff *skb, unsigned int mtu); void ipoib_cm_handle_rx_wc(struct net_device *dev, struct ib_wc *wc); void ipoib_cm_handle_tx_wc(struct net_device *dev, struct ib_wc *wc); @@ -582,7 +582,7 @@ int ipoib_cm_add_mode_attr(struct net_device *dev) return 0; } -static inline void ipoib_cm_skb_too_long(struct net_device* dev, struct sk_buff *skb, +static inline void ipoib_cm_skb_too_long(struct net_device *dev, struct sk_buff *skb, unsigned int mtu) { dev_kfree_skb_any(skb); @@ -624,12 +624,12 @@ extern struct ib_sa_client ipoib_sa_client; extern int ipoib_debug_level; #define ipoib_dbg(priv, format, arg...) \ - do { \ + do { \ if (ipoib_debug_level > 0) \ ipoib_printk(KERN_DEBUG, priv, format , ## arg); \ } while (0) #define ipoib_dbg_mcast(priv, format, arg...) \ - do { \ + do { \ if (mcast_debug_level > 0) \ ipoib_printk(KERN_DEBUG, priv, format , ## arg); \ } while (0) @@ -642,7 +642,7 @@ extern int ipoib_debug_level; #ifdef CONFIG_INFINIBAND_IPOIB_DEBUG_DATA #define ipoib_dbg_data(priv, format, arg...) \ - do { \ + do { \ if (data_debug_level > 0) \ ipoib_printk(KERN_DEBUG, priv, format , ## arg); \ } while (0) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index 059cf92b60a5..5d2da1676928 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -155,7 +155,7 @@ partial_error: return NULL; } -static void ipoib_cm_start_rx_drain(struct ipoib_dev_priv* priv) +static void ipoib_cm_start_rx_drain(struct ipoib_dev_priv *priv) { struct ib_send_wr *bad_wr; struct ipoib_cm_rx *p; @@ -495,10 +495,10 @@ static inline int post_send(struct ipoib_dev_priv *priv, { struct ib_send_wr *bad_wr; - priv->tx_sge.addr = addr; - priv->tx_sge.length = len; + priv->tx_sge.addr = addr; + priv->tx_sge.length = len; - priv->tx_wr.wr_id = wr_id | IPOIB_OP_CM; + priv->tx_wr.wr_id = wr_id | IPOIB_OP_CM; return ib_post_send(tx->qp, &priv->tx_wr, &bad_wr); } @@ -540,7 +540,7 @@ void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_ tx_req->mapping = addr; if (unlikely(post_send(priv, tx, tx->tx_head & (ipoib_sendq_size - 1), - addr, skb->len))) { + addr, skb->len))) { ipoib_warn(priv, "post_send failed\n"); ++dev->stats.tx_errors; ib_dma_unmap_single(priv->ca, addr, skb->len, DMA_TO_DEVICE); @@ -799,7 +799,7 @@ static struct ib_qp *ipoib_cm_create_tx_qp(struct net_device *dev, struct ipoib_ .sq_sig_type = IB_SIGNAL_ALL_WR, .qp_type = IB_QPT_RC, .qp_context = tx - }; + }; return ib_create_qp(priv->pd, &attr); } @@ -816,28 +816,28 @@ static int ipoib_cm_send_req(struct net_device *dev, data.qpn = cpu_to_be32(priv->qp->qp_num); data.mtu = cpu_to_be32(IPOIB_CM_BUF_SIZE); - req.primary_path = pathrec; - req.alternate_path = NULL; - req.service_id = cpu_to_be64(IPOIB_CM_IETF_ID | qpn); - req.qp_num = qp->qp_num; - req.qp_type = qp->qp_type; - req.private_data = &data; - req.private_data_len = sizeof data; - req.flow_control = 0; + req.primary_path = pathrec; + req.alternate_path = NULL; + req.service_id = cpu_to_be64(IPOIB_CM_IETF_ID | qpn); + req.qp_num = qp->qp_num; + req.qp_type = qp->qp_type; + req.private_data = &data; + req.private_data_len = sizeof data; + req.flow_control = 0; - req.starting_psn = 0; /* FIXME */ + req.starting_psn = 0; /* FIXME */ /* * Pick some arbitrary defaults here; we could make these * module parameters if anyone cared about setting them. */ - req.responder_resources = 4; - req.remote_cm_response_timeout = 20; - req.local_cm_response_timeout = 20; - req.retry_count = 0; /* RFC draft warns against retries */ - req.rnr_retry_count = 0; /* RFC draft warns against retries */ - req.max_cm_retries = 15; - req.srq = 1; + req.responder_resources = 4; + req.remote_cm_response_timeout = 20; + req.local_cm_response_timeout = 20; + req.retry_count = 0; /* RFC draft warns against retries */ + req.rnr_retry_count = 0; /* RFC draft warns against retries */ + req.max_cm_retries = 15; + req.srq = 1; return ib_send_cm_req(id, &req); } @@ -1150,7 +1150,7 @@ static void ipoib_cm_skb_reap(struct work_struct *work) spin_unlock_irq(&priv->tx_lock); } -void ipoib_cm_skb_too_long(struct net_device* dev, struct sk_buff *skb, +void ipoib_cm_skb_too_long(struct net_device *dev, struct sk_buff *skb, unsigned int mtu) { struct ipoib_dev_priv *priv = netdev_priv(dev); @@ -1212,7 +1212,7 @@ static void ipoib_cm_stale_task(struct work_struct *work) } -static ssize_t show_mode(struct device *d, struct device_attribute *attr, +static ssize_t show_mode(struct device *d, struct device_attribute *attr, char *buf) { struct ipoib_dev_priv *priv = netdev_priv(to_net_dev(d)); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c index 5063dd509ad2..52bc2bd5799a 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -345,12 +345,12 @@ static inline int post_send(struct ipoib_dev_priv *priv, { struct ib_send_wr *bad_wr; - priv->tx_sge.addr = addr; - priv->tx_sge.length = len; + priv->tx_sge.addr = addr; + priv->tx_sge.length = len; - priv->tx_wr.wr_id = wr_id; + priv->tx_wr.wr_id = wr_id; priv->tx_wr.wr.ud.remote_qpn = qpn; - priv->tx_wr.wr.ud.ah = address; + priv->tx_wr.wr.ud.ah = address; return ib_post_send(priv->qp, &priv->tx_wr, &bad_wr); } diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index c9f6077b615e..5a9c3b5a39ef 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -474,8 +474,8 @@ static struct ipoib_path *path_rec_create(struct net_device *dev, void *gid) INIT_LIST_HEAD(&path->neigh_list); memcpy(path->pathrec.dgid.raw, gid, sizeof (union ib_gid)); - path->pathrec.sgid = priv->local_gid; - path->pathrec.pkey = cpu_to_be16(priv->pkey); + path->pathrec.sgid = priv->local_gid; + path->pathrec.pkey = cpu_to_be16(priv->pkey); path->pathrec.numb_path = 1; path->pathrec.traffic_class = priv->broadcast->mcmember.traffic_class; @@ -950,34 +950,34 @@ static void ipoib_setup(struct net_device *dev) { struct ipoib_dev_priv *priv = netdev_priv(dev); - dev->open = ipoib_open; - dev->stop = ipoib_stop; - dev->change_mtu = ipoib_change_mtu; - dev->hard_start_xmit = ipoib_start_xmit; - dev->tx_timeout = ipoib_timeout; - dev->header_ops = &ipoib_header_ops; - dev->set_multicast_list = ipoib_set_mcast_list; - dev->neigh_setup = ipoib_neigh_setup_dev; + dev->open = ipoib_open; + dev->stop = ipoib_stop; + dev->change_mtu = ipoib_change_mtu; + dev->hard_start_xmit = ipoib_start_xmit; + dev->tx_timeout = ipoib_timeout; + dev->header_ops = &ipoib_header_ops; + dev->set_multicast_list = ipoib_set_mcast_list; + dev->neigh_setup = ipoib_neigh_setup_dev; netif_napi_add(dev, &priv->napi, ipoib_poll, 100); - dev->watchdog_timeo = HZ; + dev->watchdog_timeo = HZ; - dev->flags |= IFF_BROADCAST | IFF_MULTICAST; + dev->flags |= IFF_BROADCAST | IFF_MULTICAST; /* * We add in INFINIBAND_ALEN to allow for the destination * address "pseudoheader" for skbs without neighbour struct. */ - dev->hard_header_len = IPOIB_ENCAP_LEN + INFINIBAND_ALEN; - dev->addr_len = INFINIBAND_ALEN; - dev->type = ARPHRD_INFINIBAND; - dev->tx_queue_len = ipoib_sendq_size * 2; - dev->features = NETIF_F_VLAN_CHALLENGED | NETIF_F_LLTX; + dev->hard_header_len = IPOIB_ENCAP_LEN + INFINIBAND_ALEN; + dev->addr_len = INFINIBAND_ALEN; + dev->type = ARPHRD_INFINIBAND; + dev->tx_queue_len = ipoib_sendq_size * 2; + dev->features = NETIF_F_VLAN_CHALLENGED | NETIF_F_LLTX; /* MTU will be reset when mcast join happens */ - dev->mtu = IPOIB_PACKET_SIZE - IPOIB_ENCAP_LEN; - priv->mcast_mtu = priv->admin_mtu = dev->mtu; + dev->mtu = IPOIB_PACKET_SIZE - IPOIB_ENCAP_LEN; + priv->mcast_mtu = priv->admin_mtu = dev->mtu; memcpy(dev->broadcast, ipv4_bcast_addr, INFINIBAND_ALEN); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index 9bcfc7ad6aa6..858ada17f980 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -702,7 +702,7 @@ void ipoib_mcast_send(struct net_device *dev, void *mgid, struct sk_buff *skb) out: if (mcast && mcast->ah) { - if (skb->dst && + if (skb->dst && skb->dst->neighbour && !*to_ipoib_neigh(skb->dst->neighbour)) { struct ipoib_neigh *neigh = ipoib_neigh_alloc(skb->dst->neighbour, @@ -710,7 +710,7 @@ out: if (neigh) { kref_get(&mcast->ah->ref); - neigh->ah = mcast->ah; + neigh->ah = mcast->ah; list_add_tail(&neigh->list, &mcast->neigh_list); } } diff --git a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c index 3c6e45db0ab5..b6848a8d35db 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c @@ -197,12 +197,12 @@ int ipoib_transport_dev_init(struct net_device *dev, struct ib_device *ca) priv->dev->dev_addr[2] = (priv->qp->qp_num >> 8) & 0xff; priv->dev->dev_addr[3] = (priv->qp->qp_num ) & 0xff; - priv->tx_sge.lkey = priv->mr->lkey; + priv->tx_sge.lkey = priv->mr->lkey; - priv->tx_wr.opcode = IB_WR_SEND; - priv->tx_wr.sg_list = &priv->tx_sge; - priv->tx_wr.num_sge = 1; - priv->tx_wr.send_flags = IB_SEND_SIGNALED; + priv->tx_wr.opcode = IB_WR_SEND; + priv->tx_wr.sg_list = &priv->tx_sge; + priv->tx_wr.num_sge = 1; + priv->tx_wr.send_flags = IB_SEND_SIGNALED; return 0; -- cgit v1.2.3-59-g8ed1b From 1efb61444ca3a598dfafb7a6c573c5d5d42d3432 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 25 Jan 2008 14:15:24 -0800 Subject: IPoIB/cm: Factor out ipoib_cm_free_rx_ring() Factor out the code to unmap/free skbs and free the receive ring in ipoib_cm_dev_cleanup() into a new function ipoib_cm_free_rx_ring(). This function will be called from a couple of other places when support for devices that don't implement SRQs is added. Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_cm.c | 28 +++++++++++++++++++--------- 1 file changed, 19 insertions(+), 9 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index 5d2da1676928..388f0413fcb7 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -155,6 +155,22 @@ partial_error: return NULL; } +static void ipoib_cm_free_rx_ring(struct net_device *dev, + struct ipoib_cm_rx_buf *rx_ring) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + int i; + + for (i = 0; i < ipoib_recvq_size; ++i) + if (rx_ring[i].skb) { + ipoib_cm_dma_unmap_rx(priv, IPOIB_CM_RX_SG - 1, + rx_ring[i].mapping); + dev_kfree_skb_any(rx_ring[i].skb); + } + + kfree(rx_ring); +} + static void ipoib_cm_start_rx_drain(struct ipoib_dev_priv *priv) { struct ib_send_wr *bad_wr; @@ -1328,7 +1344,7 @@ int ipoib_cm_dev_init(struct net_device *dev) void ipoib_cm_dev_cleanup(struct net_device *dev) { struct ipoib_dev_priv *priv = netdev_priv(dev); - int i, ret; + int ret; if (!priv->cm.srq) return; @@ -1342,13 +1358,7 @@ void ipoib_cm_dev_cleanup(struct net_device *dev) priv->cm.srq = NULL; if (!priv->cm.srq_ring) return; - for (i = 0; i < ipoib_recvq_size; ++i) - if (priv->cm.srq_ring[i].skb) { - ipoib_cm_dma_unmap_rx(priv, IPOIB_CM_RX_SG - 1, - priv->cm.srq_ring[i].mapping); - dev_kfree_skb_any(priv->cm.srq_ring[i].skb); - priv->cm.srq_ring[i].skb = NULL; - } - kfree(priv->cm.srq_ring); + + ipoib_cm_free_rx_ring(dev, priv->cm.srq_ring); priv->cm.srq_ring = NULL; } -- cgit v1.2.3-59-g8ed1b From 7b3687df66cab4ecd6efb42cfa0c7de60cc4e3b9 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 25 Jan 2008 14:15:24 -0800 Subject: IPoIB/cm: Factor out ipoib_cm_create_srq() Factor out the code to create an SRQ and allocate the receive ring in ipoib_cm_dev_init() into a new function ipoib_cm_create_srq(). This will make the code neater when support for devices that don't implement SRQs is added. Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_cm.c | 47 +++++++++++++++++++++------------ 1 file changed, 30 insertions(+), 17 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index 388f0413fcb7..9edc9fc96210 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -1271,7 +1271,7 @@ int ipoib_cm_add_mode_attr(struct net_device *dev) return device_create_file(&dev->dev, &dev_attr_mode); } -int ipoib_cm_dev_init(struct net_device *dev) +static int ipoib_cm_create_srq(struct net_device *dev) { struct ipoib_dev_priv *priv = netdev_priv(dev); struct ib_srq_init_attr srq_init_attr = { @@ -1280,6 +1280,31 @@ int ipoib_cm_dev_init(struct net_device *dev) .max_sge = IPOIB_CM_RX_SG } }; + int ret; + + priv->cm.srq = ib_create_srq(priv->pd, &srq_init_attr); + if (IS_ERR(priv->cm.srq)) { + ret = PTR_ERR(priv->cm.srq); + priv->cm.srq = NULL; + return ret; + } + + priv->cm.srq_ring = kzalloc(ipoib_recvq_size * sizeof *priv->cm.srq_ring, + GFP_KERNEL); + if (!priv->cm.srq_ring) { + printk(KERN_WARNING "%s: failed to allocate CM ring (%d entries)\n", + priv->ca->name, ipoib_recvq_size); + ib_destroy_srq(priv->cm.srq); + priv->cm.srq = NULL; + return -ENOMEM; + } + + return 0; +} + +int ipoib_cm_dev_init(struct net_device *dev) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); int ret, i; INIT_LIST_HEAD(&priv->cm.passive_ids); @@ -1297,22 +1322,6 @@ int ipoib_cm_dev_init(struct net_device *dev) skb_queue_head_init(&priv->cm.skb_queue); - priv->cm.srq = ib_create_srq(priv->pd, &srq_init_attr); - if (IS_ERR(priv->cm.srq)) { - ret = PTR_ERR(priv->cm.srq); - priv->cm.srq = NULL; - return ret; - } - - priv->cm.srq_ring = kzalloc(ipoib_recvq_size * sizeof *priv->cm.srq_ring, - GFP_KERNEL); - if (!priv->cm.srq_ring) { - printk(KERN_WARNING "%s: failed to allocate CM ring (%d entries)\n", - priv->ca->name, ipoib_recvq_size); - ipoib_cm_dev_cleanup(dev); - return -ENOMEM; - } - for (i = 0; i < IPOIB_CM_RX_SG; ++i) priv->cm.rx_sge[i].lkey = priv->mr->lkey; @@ -1323,6 +1332,10 @@ int ipoib_cm_dev_init(struct net_device *dev) priv->cm.rx_wr.sg_list = priv->cm.rx_sge; priv->cm.rx_wr.num_sge = IPOIB_CM_RX_SG; + ret = ipoib_cm_create_srq(dev); + if (ret) + return ret; + for (i = 0; i < ipoib_recvq_size; ++i) { if (!ipoib_cm_alloc_rx_skb(dev, i, IPOIB_CM_RX_SG - 1, priv->cm.srq_ring[i].mapping)) { -- cgit v1.2.3-59-g8ed1b From efcd99717f76c6d19dd81203c60fe198480de522 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 25 Jan 2008 14:15:24 -0800 Subject: IPoIB/cm: Factor out ipoib_cm_free_rx_reap_list() Factor out the code for going through the rx_reap list of struct ipoib_cm_rx and freeing each one. This consolidates the code duplicated between ipoib_cm_dev_stop() and ipoib_cm_rx_reap() and reduces the risk of error when adding additional accounting. Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_cm.c | 43 ++++++++++++++++----------------- 1 file changed, 21 insertions(+), 22 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index 9edc9fc96210..75717a9cbcdc 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -673,10 +673,27 @@ err_cm: return ret; } +static void ipoib_cm_free_rx_reap_list(struct net_device *dev) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ipoib_cm_rx *rx, *n; + LIST_HEAD(list); + + spin_lock_irq(&priv->lock); + list_splice_init(&priv->cm.rx_reap_list, &list); + spin_unlock_irq(&priv->lock); + + list_for_each_entry_safe(rx, n, &list, list) { + ib_destroy_cm_id(rx->id); + ib_destroy_qp(rx->qp); + kfree(rx); + } +} + void ipoib_cm_dev_stop(struct net_device *dev) { struct ipoib_dev_priv *priv = netdev_priv(dev); - struct ipoib_cm_rx *p, *n; + struct ipoib_cm_rx *p; unsigned long begin; LIST_HEAD(list); int ret; @@ -722,15 +739,9 @@ void ipoib_cm_dev_stop(struct net_device *dev) spin_lock_irq(&priv->lock); } - list_splice_init(&priv->cm.rx_reap_list, &list); - spin_unlock_irq(&priv->lock); - list_for_each_entry_safe(p, n, &list, list) { - ib_destroy_cm_id(p->id); - ib_destroy_qp(p->qp); - kfree(p); - } + ipoib_cm_free_rx_reap_list(dev); cancel_delayed_work(&priv->cm.stale_task); } @@ -1182,20 +1193,8 @@ void ipoib_cm_skb_too_long(struct net_device *dev, struct sk_buff *skb, static void ipoib_cm_rx_reap(struct work_struct *work) { - struct ipoib_dev_priv *priv = container_of(work, struct ipoib_dev_priv, - cm.rx_reap_task); - struct ipoib_cm_rx *p, *n; - LIST_HEAD(list); - - spin_lock_irq(&priv->lock); - list_splice_init(&priv->cm.rx_reap_list, &list); - spin_unlock_irq(&priv->lock); - - list_for_each_entry_safe(p, n, &list, list) { - ib_destroy_cm_id(p->id); - ib_destroy_qp(p->qp); - kfree(p); - } + ipoib_cm_free_rx_reap_list(container_of(work, struct ipoib_dev_priv, + cm.rx_reap_task)->dev); } static void ipoib_cm_stale_task(struct work_struct *work) -- cgit v1.2.3-59-g8ed1b From 68e995a295720439ad2bf8677114cdf9d262d905 Mon Sep 17 00:00:00 2001 From: Pradeep Satyanarayana Date: Fri, 25 Jan 2008 14:15:24 -0800 Subject: IPoIB/cm: Add connected mode support for devices without SRQs Some IB adapters (notably IBM's eHCA) do not implement SRQs (shared receive queues). The current IPoIB connected mode support only works on devices that support SRQs. Fix this by adding support for using the receive queue of each connected mode receive QP. The disadvantage of this compared to using an SRQ is that it means a full queue of receives must be posted for each remote connected mode peer, which means that total memory usage is potentially much higher than when using SRQs. To manage this, add a new module parameter "max_nonsrq_conn_qp" that limits the number of connections allowed per interface. The rest of the changes are fairly straightforward: we use a table of struct ipoib_cm_rx to hold all the active connections, and put the table index of the connection in the high bits of receive WR IDs. This is needed because we cannot rely on the struct ib_wc.qp field for non-SRQ receive completions. Most of the rest of the changes just test whether or not an SRQ is available, and post receives or find received packets in the right place depending on the answer. Cleaning up dead connections actually becomes simpler, because we do not have to do the "last WQE reached" dance that is required to destroy QPs attached to an SRQ. We just move the QP to the error state and wait for all pending receives to be flushed. Signed-off-by: Pradeep Satyanarayana [ Completely rewritten and split up, based on Pradeep's work. Several bugs fixed and no doubt several bugs introduced. - Roland ] Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib.h | 19 +++ drivers/infiniband/ulp/ipoib/ipoib_cm.c | 213 +++++++++++++++++++++++------ drivers/infiniband/ulp/ipoib/ipoib_main.c | 3 + drivers/infiniband/ulp/ipoib/ipoib_verbs.c | 8 +- 4 files changed, 200 insertions(+), 43 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index a376fb6ffa0e..d35025f0652b 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -69,6 +69,7 @@ enum { IPOIB_TX_RING_SIZE = 64, IPOIB_MAX_QUEUE_SIZE = 8192, IPOIB_MIN_QUEUE_SIZE = 2, + IPOIB_CM_MAX_CONN_QP = 4096, IPOIB_NUM_WC = 4, @@ -188,10 +189,12 @@ enum ipoib_cm_state { struct ipoib_cm_rx { struct ib_cm_id *id; struct ib_qp *qp; + struct ipoib_cm_rx_buf *rx_ring; struct list_head list; struct net_device *dev; unsigned long jiffies; enum ipoib_cm_state state; + int recv_count; }; struct ipoib_cm_tx { @@ -234,6 +237,7 @@ struct ipoib_cm_dev_priv { struct ib_wc ibwc[IPOIB_NUM_WC]; struct ib_sge rx_sge[IPOIB_CM_RX_SG]; struct ib_recv_wr rx_wr; + int nonsrq_conn_qp; }; /* @@ -461,6 +465,8 @@ void ipoib_drain_cq(struct net_device *dev); /* We don't support UC connections at the moment */ #define IPOIB_CM_SUPPORTED(ha) (ha[0] & (IPOIB_FLAGS_RC)) +extern int ipoib_max_conn_qp; + static inline int ipoib_cm_admin_enabled(struct net_device *dev) { struct ipoib_dev_priv *priv = netdev_priv(dev); @@ -491,6 +497,12 @@ static inline void ipoib_cm_set(struct ipoib_neigh *neigh, struct ipoib_cm_tx *t neigh->cm = tx; } +static inline int ipoib_cm_has_srq(struct net_device *dev) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + return !!priv->cm.srq; +} + void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_tx *tx); int ipoib_cm_dev_open(struct net_device *dev); void ipoib_cm_dev_stop(struct net_device *dev); @@ -508,6 +520,8 @@ void ipoib_cm_handle_tx_wc(struct net_device *dev, struct ib_wc *wc); struct ipoib_cm_tx; +#define ipoib_max_conn_qp 0 + static inline int ipoib_cm_admin_enabled(struct net_device *dev) { return 0; @@ -533,6 +547,11 @@ static inline void ipoib_cm_set(struct ipoib_neigh *neigh, struct ipoib_cm_tx *t { } +static inline int ipoib_cm_has_srq(struct net_device *dev) +{ + return 0; +} + static inline void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_tx *tx) { diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index 75717a9cbcdc..fdf33cecc6d5 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -39,6 +39,15 @@ #include #include +#include "ipoib.h" + +int ipoib_max_conn_qp = 128; + +module_param_named(max_nonsrq_conn_qp, ipoib_max_conn_qp, int, 0444); +MODULE_PARM_DESC(max_nonsrq_conn_qp, + "Max number of connected-mode QPs per interface " + "(applied only if shared receive queue is not available)"); + #ifdef CONFIG_INFINIBAND_IPOIB_DEBUG_DATA static int data_debug_level; @@ -47,8 +56,6 @@ MODULE_PARM_DESC(cm_data_debug_level, "Enable data path debug tracing for connected mode if > 0"); #endif -#include "ipoib.h" - #define IPOIB_CM_IETF_ID 0x1000000000000000ULL #define IPOIB_CM_RX_UPDATE_TIME (256 * HZ) @@ -81,7 +88,7 @@ static void ipoib_cm_dma_unmap_rx(struct ipoib_dev_priv *priv, int frags, ib_dma_unmap_single(priv->ca, mapping[i + 1], PAGE_SIZE, DMA_FROM_DEVICE); } -static int ipoib_cm_post_receive(struct net_device *dev, int id) +static int ipoib_cm_post_receive_srq(struct net_device *dev, int id) { struct ipoib_dev_priv *priv = netdev_priv(dev); struct ib_recv_wr *bad_wr; @@ -104,7 +111,33 @@ static int ipoib_cm_post_receive(struct net_device *dev, int id) return ret; } -static struct sk_buff *ipoib_cm_alloc_rx_skb(struct net_device *dev, int id, int frags, +static int ipoib_cm_post_receive_nonsrq(struct net_device *dev, + struct ipoib_cm_rx *rx, int id) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ib_recv_wr *bad_wr; + int i, ret; + + priv->cm.rx_wr.wr_id = id | IPOIB_OP_CM | IPOIB_OP_RECV; + + for (i = 0; i < IPOIB_CM_RX_SG; ++i) + priv->cm.rx_sge[i].addr = rx->rx_ring[id].mapping[i]; + + ret = ib_post_recv(rx->qp, &priv->cm.rx_wr, &bad_wr); + if (unlikely(ret)) { + ipoib_warn(priv, "post recv failed for buf %d (%d)\n", id, ret); + ipoib_cm_dma_unmap_rx(priv, IPOIB_CM_RX_SG - 1, + rx->rx_ring[id].mapping); + dev_kfree_skb_any(rx->rx_ring[id].skb); + rx->rx_ring[id].skb = NULL; + } + + return ret; +} + +static struct sk_buff *ipoib_cm_alloc_rx_skb(struct net_device *dev, + struct ipoib_cm_rx_buf *rx_ring, + int id, int frags, u64 mapping[IPOIB_CM_RX_SG]) { struct ipoib_dev_priv *priv = netdev_priv(dev); @@ -141,7 +174,7 @@ static struct sk_buff *ipoib_cm_alloc_rx_skb(struct net_device *dev, int id, int goto partial_error; } - priv->cm.srq_ring[id].skb = skb; + rx_ring[id].skb = skb; return skb; partial_error: @@ -224,12 +257,18 @@ static struct ib_qp *ipoib_cm_create_rx_qp(struct net_device *dev, .qp_type = IB_QPT_RC, .qp_context = p, }; + + if (!ipoib_cm_has_srq(dev)) { + attr.cap.max_recv_wr = ipoib_recvq_size; + attr.cap.max_recv_sge = IPOIB_CM_RX_SG; + } + return ib_create_qp(priv->pd, &attr); } static int ipoib_cm_modify_rx_qp(struct net_device *dev, - struct ib_cm_id *cm_id, struct ib_qp *qp, - unsigned psn) + struct ib_cm_id *cm_id, struct ib_qp *qp, + unsigned psn) { struct ipoib_dev_priv *priv = netdev_priv(dev); struct ib_qp_attr qp_attr; @@ -282,6 +321,60 @@ static int ipoib_cm_modify_rx_qp(struct net_device *dev, return 0; } +static int ipoib_cm_nonsrq_init_rx(struct net_device *dev, struct ib_cm_id *cm_id, + struct ipoib_cm_rx *rx) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + int ret; + int i; + + rx->rx_ring = kcalloc(ipoib_recvq_size, sizeof *rx->rx_ring, GFP_KERNEL); + if (!rx->rx_ring) + return -ENOMEM; + + spin_lock_irq(&priv->lock); + + if (priv->cm.nonsrq_conn_qp >= ipoib_max_conn_qp) { + spin_unlock_irq(&priv->lock); + ib_send_cm_rej(cm_id, IB_CM_REJ_NO_QP, NULL, 0, NULL, 0); + ret = -EINVAL; + goto err_free; + } else + ++priv->cm.nonsrq_conn_qp; + + spin_unlock_irq(&priv->lock); + + for (i = 0; i < ipoib_recvq_size; ++i) { + if (!ipoib_cm_alloc_rx_skb(dev, rx->rx_ring, i, IPOIB_CM_RX_SG - 1, + rx->rx_ring[i].mapping)) { + ipoib_warn(priv, "failed to allocate receive buffer %d\n", i); + ret = -ENOMEM; + goto err_count; + } + ret = ipoib_cm_post_receive_nonsrq(dev, rx, i); + if (ret) { + ipoib_warn(priv, "ipoib_cm_post_receive_nonsrq " + "failed for buf %d\n", i); + ret = -EIO; + goto err_count; + } + } + + rx->recv_count = ipoib_recvq_size; + + return 0; + +err_count: + spin_lock_irq(&priv->lock); + --priv->cm.nonsrq_conn_qp; + spin_unlock_irq(&priv->lock); + +err_free: + ipoib_cm_free_rx_ring(dev, rx->rx_ring); + + return ret; +} + static int ipoib_cm_send_rep(struct net_device *dev, struct ib_cm_id *cm_id, struct ib_qp *qp, struct ib_cm_req_event_param *req, unsigned psn) @@ -297,7 +390,7 @@ static int ipoib_cm_send_rep(struct net_device *dev, struct ib_cm_id *cm_id, rep.private_data_len = sizeof data; rep.flow_control = 0; rep.rnr_retry_count = req->rnr_retry_count; - rep.srq = 1; + rep.srq = ipoib_cm_has_srq(dev); rep.qp_num = qp->qp_num; rep.starting_psn = psn; return ib_send_cm_rep(cm_id, &rep); @@ -333,6 +426,12 @@ static int ipoib_cm_req_handler(struct ib_cm_id *cm_id, struct ib_cm_event *even if (ret) goto err_modify; + if (!ipoib_cm_has_srq(dev)) { + ret = ipoib_cm_nonsrq_init_rx(dev, cm_id, p); + if (ret) + goto err_modify; + } + spin_lock_irq(&priv->lock); queue_delayed_work(ipoib_workqueue, &priv->cm.stale_task, IPOIB_CM_RX_DELAY); @@ -417,12 +516,14 @@ static void skb_put_frags(struct sk_buff *skb, unsigned int hdr_space, void ipoib_cm_handle_rx_wc(struct net_device *dev, struct ib_wc *wc) { struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ipoib_cm_rx_buf *rx_ring; unsigned int wr_id = wc->wr_id & ~(IPOIB_OP_CM | IPOIB_OP_RECV); struct sk_buff *skb, *newskb; struct ipoib_cm_rx *p; unsigned long flags; u64 mapping[IPOIB_CM_RX_SG]; int frags; + int has_srq; ipoib_dbg_data(priv, "cm recv completion: id %d, status: %d\n", wr_id, wc->status); @@ -440,18 +541,32 @@ void ipoib_cm_handle_rx_wc(struct net_device *dev, struct ib_wc *wc) return; } - skb = priv->cm.srq_ring[wr_id].skb; + p = wc->qp->qp_context; + + has_srq = ipoib_cm_has_srq(dev); + rx_ring = has_srq ? priv->cm.srq_ring : p->rx_ring; + + skb = rx_ring[wr_id].skb; if (unlikely(wc->status != IB_WC_SUCCESS)) { ipoib_dbg(priv, "cm recv error " "(status=%d, wrid=%d vend_err %x)\n", wc->status, wr_id, wc->vendor_err); ++dev->stats.rx_dropped; - goto repost; + if (has_srq) + goto repost; + else { + if (!--p->recv_count) { + spin_lock_irqsave(&priv->lock, flags); + list_move(&p->list, &priv->cm.rx_reap_list); + spin_unlock_irqrestore(&priv->lock, flags); + queue_work(ipoib_workqueue, &priv->cm.rx_reap_task); + } + return; + } } if (unlikely(!(wr_id & IPOIB_CM_RX_UPDATE_MASK))) { - p = wc->qp->qp_context; if (p && time_after_eq(jiffies, p->jiffies + IPOIB_CM_RX_UPDATE_TIME)) { spin_lock_irqsave(&priv->lock, flags); p->jiffies = jiffies; @@ -466,7 +581,7 @@ void ipoib_cm_handle_rx_wc(struct net_device *dev, struct ib_wc *wc) frags = PAGE_ALIGN(wc->byte_len - min(wc->byte_len, (unsigned)IPOIB_CM_HEAD_SIZE)) / PAGE_SIZE; - newskb = ipoib_cm_alloc_rx_skb(dev, wr_id, frags, mapping); + newskb = ipoib_cm_alloc_rx_skb(dev, rx_ring, wr_id, frags, mapping); if (unlikely(!newskb)) { /* * If we can't allocate a new RX buffer, dump @@ -477,8 +592,8 @@ void ipoib_cm_handle_rx_wc(struct net_device *dev, struct ib_wc *wc) goto repost; } - ipoib_cm_dma_unmap_rx(priv, frags, priv->cm.srq_ring[wr_id].mapping); - memcpy(priv->cm.srq_ring[wr_id].mapping, mapping, (frags + 1) * sizeof *mapping); + ipoib_cm_dma_unmap_rx(priv, frags, rx_ring[wr_id].mapping); + memcpy(rx_ring[wr_id].mapping, mapping, (frags + 1) * sizeof *mapping); ipoib_dbg_data(priv, "received %d bytes, SLID 0x%04x\n", wc->byte_len, wc->slid); @@ -499,9 +614,17 @@ void ipoib_cm_handle_rx_wc(struct net_device *dev, struct ib_wc *wc) netif_receive_skb(skb); repost: - if (unlikely(ipoib_cm_post_receive(dev, wr_id))) - ipoib_warn(priv, "ipoib_cm_post_receive failed " - "for buf %d\n", wr_id); + if (has_srq) { + if (unlikely(ipoib_cm_post_receive_srq(dev, wr_id))) + ipoib_warn(priv, "ipoib_cm_post_receive_srq failed " + "for buf %d\n", wr_id); + } else { + if (unlikely(ipoib_cm_post_receive_nonsrq(dev, p, wr_id))) { + --p->recv_count; + ipoib_warn(priv, "ipoib_cm_post_receive_nonsrq failed " + "for buf %d\n", wr_id); + } + } } static inline int post_send(struct ipoib_dev_priv *priv, @@ -686,6 +809,12 @@ static void ipoib_cm_free_rx_reap_list(struct net_device *dev) list_for_each_entry_safe(rx, n, &list, list) { ib_destroy_cm_id(rx->id); ib_destroy_qp(rx->qp); + if (!ipoib_cm_has_srq(dev)) { + ipoib_cm_free_rx_ring(priv->dev, rx->rx_ring); + spin_lock_irq(&priv->lock); + --priv->cm.nonsrq_conn_qp; + spin_unlock_irq(&priv->lock); + } kfree(rx); } } @@ -864,7 +993,7 @@ static int ipoib_cm_send_req(struct net_device *dev, req.retry_count = 0; /* RFC draft warns against retries */ req.rnr_retry_count = 0; /* RFC draft warns against retries */ req.max_cm_retries = 15; - req.srq = 1; + req.srq = ipoib_cm_has_srq(dev); return ib_send_cm_req(id, &req); } @@ -1270,7 +1399,7 @@ int ipoib_cm_add_mode_attr(struct net_device *dev) return device_create_file(&dev->dev, &dev_attr_mode); } -static int ipoib_cm_create_srq(struct net_device *dev) +static void ipoib_cm_create_srq(struct net_device *dev) { struct ipoib_dev_priv *priv = netdev_priv(dev); struct ib_srq_init_attr srq_init_attr = { @@ -1279,32 +1408,30 @@ static int ipoib_cm_create_srq(struct net_device *dev) .max_sge = IPOIB_CM_RX_SG } }; - int ret; priv->cm.srq = ib_create_srq(priv->pd, &srq_init_attr); if (IS_ERR(priv->cm.srq)) { - ret = PTR_ERR(priv->cm.srq); + if (PTR_ERR(priv->cm.srq) != -ENOSYS) + printk(KERN_WARNING "%s: failed to allocate SRQ, error %ld\n", + priv->ca->name, PTR_ERR(priv->cm.srq)); priv->cm.srq = NULL; - return ret; + return; } priv->cm.srq_ring = kzalloc(ipoib_recvq_size * sizeof *priv->cm.srq_ring, GFP_KERNEL); if (!priv->cm.srq_ring) { - printk(KERN_WARNING "%s: failed to allocate CM ring (%d entries)\n", + printk(KERN_WARNING "%s: failed to allocate CM SRQ ring (%d entries)\n", priv->ca->name, ipoib_recvq_size); ib_destroy_srq(priv->cm.srq); priv->cm.srq = NULL; - return -ENOMEM; } - - return 0; } int ipoib_cm_dev_init(struct net_device *dev) { struct ipoib_dev_priv *priv = netdev_priv(dev); - int ret, i; + int i; INIT_LIST_HEAD(&priv->cm.passive_ids); INIT_LIST_HEAD(&priv->cm.reap_list); @@ -1331,21 +1458,25 @@ int ipoib_cm_dev_init(struct net_device *dev) priv->cm.rx_wr.sg_list = priv->cm.rx_sge; priv->cm.rx_wr.num_sge = IPOIB_CM_RX_SG; - ret = ipoib_cm_create_srq(dev); - if (ret) - return ret; + ipoib_cm_create_srq(dev); + + if (ipoib_cm_has_srq(dev)) { + for (i = 0; i < ipoib_recvq_size; ++i) { + if (!ipoib_cm_alloc_rx_skb(dev, priv->cm.srq_ring, i, + IPOIB_CM_RX_SG - 1, + priv->cm.srq_ring[i].mapping)) { + ipoib_warn(priv, "failed to allocate " + "receive buffer %d\n", i); + ipoib_cm_dev_cleanup(dev); + return -ENOMEM; + } - for (i = 0; i < ipoib_recvq_size; ++i) { - if (!ipoib_cm_alloc_rx_skb(dev, i, IPOIB_CM_RX_SG - 1, - priv->cm.srq_ring[i].mapping)) { - ipoib_warn(priv, "failed to allocate receive buffer %d\n", i); - ipoib_cm_dev_cleanup(dev); - return -ENOMEM; - } - if (ipoib_cm_post_receive(dev, i)) { - ipoib_warn(priv, "ipoib_ib_post_receive failed for buf %d\n", i); - ipoib_cm_dev_cleanup(dev); - return -EIO; + if (ipoib_cm_post_receive_srq(dev, i)) { + ipoib_warn(priv, "ipoib_cm_post_receive_srq " + "failed for buf %d\n", i); + ipoib_cm_dev_cleanup(dev); + return -EIO; + } } } diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 5a9c3b5a39ef..3bfc2ef1303e 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -1268,6 +1268,9 @@ static int __init ipoib_init_module(void) ipoib_sendq_size = roundup_pow_of_two(ipoib_sendq_size); ipoib_sendq_size = min(ipoib_sendq_size, IPOIB_MAX_QUEUE_SIZE); ipoib_sendq_size = max(ipoib_sendq_size, IPOIB_MIN_QUEUE_SIZE); +#ifdef CONFIG_INFINIBAND_IPOIB_CM + ipoib_max_conn_qp = min(ipoib_max_conn_qp, IPOIB_CM_MAX_CONN_QP); +#endif ret = ipoib_register_debugfs(); if (ret) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c index b6848a8d35db..433e99ac227b 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c @@ -172,8 +172,12 @@ int ipoib_transport_dev_init(struct net_device *dev, struct ib_device *ca) size = ipoib_sendq_size + ipoib_recvq_size + 1; ret = ipoib_cm_dev_init(dev); - if (!ret) - size += ipoib_recvq_size + 1 /* 1 extra for rx_drain_qp */; + if (!ret) { + if (ipoib_cm_has_srq(dev)) + size += ipoib_recvq_size + 1; /* 1 extra for rx_drain_qp */ + else + size += ipoib_recvq_size * ipoib_max_conn_qp; + } priv->cq = ib_create_cq(priv->ca, ipoib_ib_completion, NULL, dev, size, 0); if (IS_ERR(priv->cq)) { -- cgit v1.2.3-59-g8ed1b From e193e3326c521eea6a0221e945627ae5e3274910 Mon Sep 17 00:00:00 2001 From: Dave Olson Date: Wed, 10 Oct 2007 05:10:35 -0700 Subject: IB/ipath: Improve interrupt handler cache footprint Improve interrupt handler cache footprint by noinline'ing error functions that are rarely called. Signed-off-by: Dave Olson Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_intr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c index c61f9da2964a..8f3718c1694f 100644 --- a/drivers/infiniband/hw/ipath/ipath_intr.c +++ b/drivers/infiniband/hw/ipath/ipath_intr.c @@ -849,7 +849,7 @@ void ipath_clear_freeze(struct ipath_devdata *dd) /* this is separate to allow for better optimization of ipath_intr() */ -static void ipath_bad_intr(struct ipath_devdata *dd, u32 * unexpectp) +static noinline void ipath_bad_intr(struct ipath_devdata *dd, u32 *unexpectp) { /* * sometimes happen during driver init and unload, don't want @@ -892,7 +892,7 @@ static void ipath_bad_intr(struct ipath_devdata *dd, u32 * unexpectp) "ignoring\n"); } -static void ipath_bad_regread(struct ipath_devdata *dd) +static noinline void ipath_bad_regread(struct ipath_devdata *dd) { static int allbits; -- cgit v1.2.3-59-g8ed1b From 8d8293cfb38b042835eeded7c1d90f75ca243e87 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Mon, 29 Oct 2007 11:34:05 -0500 Subject: RDMA/iwcm: Set initiator depth and responder resources to device max values Set the initiator depth and responder resources to the device max values for new connect request events in the iWARP connection manager. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/core/cma.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 0751697ef984..5a80e74731c8 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -1262,6 +1262,7 @@ static int iw_conn_req_handler(struct iw_cm_id *cm_id, struct net_device *dev = NULL; struct rdma_cm_event event; int ret; + struct ib_device_attr attr; listen_id = cm_id->context; if (cma_disable_remove(listen_id, CMA_LISTEN)) @@ -1311,10 +1312,19 @@ static int iw_conn_req_handler(struct iw_cm_id *cm_id, sin = (struct sockaddr_in *) &new_cm_id->route.addr.dst_addr; *sin = iw_event->remote_addr; + ret = ib_query_device(conn_id->id.device, &attr); + if (ret) { + cma_enable_remove(conn_id); + rdma_destroy_id(new_cm_id); + goto out; + } + memset(&event, 0, sizeof event); event.event = RDMA_CM_EVENT_CONNECT_REQUEST; event.param.conn.private_data = iw_event->private_data; event.param.conn.private_data_len = iw_event->private_data_len; + event.param.conn.initiator_depth = attr.max_qp_init_rd_atom; + event.param.conn.responder_resources = attr.max_qp_rd_atom; ret = conn_id->id.event_handler(&conn_id->id, &event); if (ret) { /* User wants to destroy the CM ID */ -- cgit v1.2.3-59-g8ed1b From 3828ff457a694f97f88f6978bea428199df0a690 Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Tue, 23 Oct 2007 15:04:15 -0700 Subject: IB/mad: Remove redundant NULL pointer check in ib_mad_recv_done_handler() In ib_mad_recv_done_handler(), the response pointer is checked for NULL after allocating it. It is then checked again in the local process_mad() path but there is no possibility of it changing in between. Signed-off-by: Ralph Campbell Acked-by: Hal Rosenstock Signed-off-by: Roland Dreier --- drivers/infiniband/core/mad.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index 6f4287716ab1..f82900d30b9a 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -1931,15 +1931,6 @@ local: if (port_priv->device->process_mad) { int ret; - if (!response) { - printk(KERN_ERR PFX "No memory for response MAD\n"); - /* - * Is it better to assume that - * it wouldn't be processed ? - */ - goto out; - } - ret = port_priv->device->process_mad(port_priv->device, 0, port_priv->port_num, wc, &recv->grh, -- cgit v1.2.3-59-g8ed1b From f9b403532235520ec248c024f621efcaf6ba7b93 Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Tue, 23 Oct 2007 15:07:41 -0700 Subject: IB/ipath: Enable loopback of DR SMP responses from userspace This patch is in response to reviewing a patch to the core MAD processing which fixes loopback of directed route packets to/from user level MAD agents. This change enables the core code to work for ib_ipath by fixing the return code from the ipath process_mad method. Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_mad.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_mad.c b/drivers/infiniband/hw/ipath/ipath_mad.c index 3d1432d1e3f4..1978c346b5c5 100644 --- a/drivers/infiniband/hw/ipath/ipath_mad.c +++ b/drivers/infiniband/hw/ipath/ipath_mad.c @@ -1434,7 +1434,7 @@ static int process_subn(struct ib_device *ibdev, int mad_flags, * before checking for other consumers. * Just tell the caller to process it normally. */ - ret = IB_MAD_RESULT_FAILURE; + ret = IB_MAD_RESULT_SUCCESS; goto bail; default: smp->status |= IB_SMP_UNSUP_METHOD; @@ -1516,7 +1516,7 @@ static int process_perf(struct ib_device *ibdev, u8 port_num, * before checking for other consumers. * Just tell the caller to process it normally. */ - ret = IB_MAD_RESULT_FAILURE; + ret = IB_MAD_RESULT_SUCCESS; goto bail; default: pmp->status |= IB_SMP_UNSUP_METHOD; -- cgit v1.2.3-59-g8ed1b From 727792da2bc22e2ce125faef84aeca3b3e2f4a90 Mon Sep 17 00:00:00 2001 From: Steve Welch Date: Tue, 23 Oct 2007 15:06:10 -0700 Subject: IB/mad: Enable loopback of DR SMP responses from userspace The local loopback of an outgoing DR SMP response is limited to those that originate at the driver specific SMA implementation during the driver specific process_mad() function. This patch enables a returning DR SMP originating in userspace (or elsewhere) to be delivered to the local managment stack. In this specific case the driver process_mad() function does not consume or process the MAD, so a reponse mad has not be created and the original MAD must manually be copied to the MAD buffer that is to be handed off to the local agent. Signed-off-by: Steve Welch Acked-by: Hal Rosenstock Signed-off-by: Roland Dreier --- drivers/infiniband/core/mad.c | 6 +++--- drivers/infiniband/core/smi.h | 18 +++++++++++++++++- 2 files changed, 20 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index f82900d30b9a..649335a03312 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -701,7 +701,8 @@ static int handle_outgoing_dr_smp(struct ib_mad_agent_private *mad_agent_priv, } /* Check to post send on QP or process locally */ - if (smi_check_local_smp(smp, device) == IB_SMI_DISCARD) + if (smi_check_local_smp(smp, device) == IB_SMI_DISCARD && + smi_check_local_returning_smp(smp, device) == IB_SMI_DISCARD) goto out; local = kmalloc(sizeof *local, GFP_ATOMIC); @@ -752,8 +753,7 @@ static int handle_outgoing_dr_smp(struct ib_mad_agent_private *mad_agent_priv, port_priv = ib_get_mad_port(mad_agent_priv->agent.device, mad_agent_priv->agent.port_num); if (port_priv) { - mad_priv->mad.mad.mad_hdr.tid = - ((struct ib_mad *)smp)->mad_hdr.tid; + memcpy(&mad_priv->mad.mad, smp, sizeof(struct ib_mad)); recv_mad_agent = find_mad_agent(port_priv, &mad_priv->mad.mad); } diff --git a/drivers/infiniband/core/smi.h b/drivers/infiniband/core/smi.h index 1cfc2984434f..aff96bac49b4 100644 --- a/drivers/infiniband/core/smi.h +++ b/drivers/infiniband/core/smi.h @@ -59,7 +59,8 @@ extern enum smi_action smi_handle_dr_smp_send(struct ib_smp *smp, u8 node_type, int port_num); /* - * Return 1 if the SMP should be handled by the local SMA/SM via process_mad + * Return IB_SMI_HANDLE if the SMP should be handled by the local SMA/SM + * via process_mad */ static inline enum smi_action smi_check_local_smp(struct ib_smp *smp, struct ib_device *device) @@ -71,4 +72,19 @@ static inline enum smi_action smi_check_local_smp(struct ib_smp *smp, (smp->hop_ptr == smp->hop_cnt + 1)) ? IB_SMI_HANDLE : IB_SMI_DISCARD); } + +/* + * Return IB_SMI_HANDLE if the SMP should be handled by the local SMA/SM + * via process_mad + */ +static inline enum smi_action smi_check_local_returning_smp(struct ib_smp *smp, + struct ib_device *device) +{ + /* C14-13:3 -- We're at the end of the DR segment of path */ + /* C14-13:4 -- Hop Pointer == 0 -> give to SM */ + return ((device->process_mad && + ib_get_smp_direction(smp) && + !smp->hop_ptr) ? IB_SMI_HANDLE : IB_SMI_DISCARD); +} + #endif /* __SMI_H_ */ -- cgit v1.2.3-59-g8ed1b From 2c45688faed1b19583c388694025e39001b68c8d Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Thu, 15 Nov 2007 15:23:25 -0800 Subject: IB/ipath: Convert ipath_eep_sem semaphore to a mutex Signed-off-by: Matthias Kaehlcke Acked-by: Michael Albaugh Tested-by: Arthur Jones Signed-off-by: Andrew Morton Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_eeprom.c | 20 ++++++++++---------- drivers/infiniband/hw/ipath/ipath_init_chip.c | 2 +- drivers/infiniband/hw/ipath/ipath_kernel.h | 3 ++- 3 files changed, 13 insertions(+), 12 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_eeprom.c b/drivers/infiniband/hw/ipath/ipath_eeprom.c index e7c25dbbcdc9..a5b6299ed667 100644 --- a/drivers/infiniband/hw/ipath/ipath_eeprom.c +++ b/drivers/infiniband/hw/ipath/ipath_eeprom.c @@ -510,10 +510,10 @@ int ipath_eeprom_read(struct ipath_devdata *dd, u8 eeprom_offset, { int ret; - ret = down_interruptible(&dd->ipath_eep_sem); + ret = mutex_lock_interruptible(&dd->ipath_eep_lock); if (!ret) { ret = ipath_eeprom_internal_read(dd, eeprom_offset, buff, len); - up(&dd->ipath_eep_sem); + mutex_unlock(&dd->ipath_eep_lock); } return ret; @@ -524,10 +524,10 @@ int ipath_eeprom_write(struct ipath_devdata *dd, u8 eeprom_offset, { int ret; - ret = down_interruptible(&dd->ipath_eep_sem); + ret = mutex_lock_interruptible(&dd->ipath_eep_lock); if (!ret) { ret = ipath_eeprom_internal_write(dd, eeprom_offset, buff, len); - up(&dd->ipath_eep_sem); + mutex_unlock(&dd->ipath_eep_lock); } return ret; @@ -616,9 +616,9 @@ void ipath_get_eeprom_info(struct ipath_devdata *dd) goto bail; } - down(&dd->ipath_eep_sem); + mutex_lock(&dd->ipath_eep_lock); eep_stat = ipath_eeprom_internal_read(dd, 0, buf, len); - up(&dd->ipath_eep_sem); + mutex_unlock(&dd->ipath_eep_lock); if (eep_stat) { ipath_dev_err(dd, "Failed reading GUID from eeprom\n"); @@ -764,14 +764,14 @@ int ipath_update_eeprom_log(struct ipath_devdata *dd) /* Grab semaphore and read current EEPROM. If we get an * error, let go, but if not, keep it until we finish write. */ - ret = down_interruptible(&dd->ipath_eep_sem); + ret = mutex_lock_interruptible(&dd->ipath_eep_lock); if (ret) { ipath_dev_err(dd, "Unable to acquire EEPROM for logging\n"); goto free_bail; } ret = ipath_eeprom_internal_read(dd, 0, buf, len); if (ret) { - up(&dd->ipath_eep_sem); + mutex_unlock(&dd->ipath_eep_lock); ipath_dev_err(dd, "Unable read EEPROM for logging\n"); goto free_bail; } @@ -779,7 +779,7 @@ int ipath_update_eeprom_log(struct ipath_devdata *dd) csum = flash_csum(ifp, 0); if (csum != ifp->if_csum) { - up(&dd->ipath_eep_sem); + mutex_unlock(&dd->ipath_eep_lock); ipath_dev_err(dd, "EEPROM cks err (0x%02X, S/B 0x%02X)\n", csum, ifp->if_csum); ret = 1; @@ -849,7 +849,7 @@ int ipath_update_eeprom_log(struct ipath_devdata *dd) csum = flash_csum(ifp, 1); ret = ipath_eeprom_internal_write(dd, 0, buf, hi_water + 1); } - up(&dd->ipath_eep_sem); + mutex_unlock(&dd->ipath_eep_lock); if (ret) ipath_dev_err(dd, "Failed updating EEPROM\n"); diff --git a/drivers/infiniband/hw/ipath/ipath_init_chip.c b/drivers/infiniband/hw/ipath/ipath_init_chip.c index 9dd0bacf8461..9e9d6fafcf0d 100644 --- a/drivers/infiniband/hw/ipath/ipath_init_chip.c +++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c @@ -348,7 +348,7 @@ static int init_chip_first(struct ipath_devdata *dd, spin_lock_init(&dd->ipath_gpio_lock); spin_lock_init(&dd->ipath_eep_st_lock); - sema_init(&dd->ipath_eep_sem, 1); + mutex_init(&dd->ipath_eep_lock); done: *pdp = pd; diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h index bb1dc075f1d1..1ef82d6bf377 100644 --- a/drivers/infiniband/hw/ipath/ipath_kernel.h +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -41,6 +41,7 @@ #include #include #include +#include #include #include @@ -616,7 +617,7 @@ struct ipath_devdata { /* control access to actual counters, timer */ spinlock_t ipath_eep_st_lock; /* control high-level access to EEPROM */ - struct semaphore ipath_eep_sem; + struct mutex ipath_eep_lock; /* Below inc'd by ipath_snap_cntrs(), locked by ipath_eep_st_lock */ uint64_t ipath_traffic_wds; /* active time is kept in seconds, but logged in hours */ -- cgit v1.2.3-59-g8ed1b From 908cf9a565348b5a6d765d120cb189a568ea4883 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 19 Nov 2007 17:48:11 -0800 Subject: drivers/infiniband: Add missing "space" Add missing spaces in the middle of format strings. Signed-off-by: Joe Perches Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ehca/ehca_cq.c | 2 +- drivers/infiniband/hw/ehca/ehca_qp.c | 6 +++--- drivers/infiniband/ulp/iser/iser_initiator.c | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/infiniband/hw/ehca/ehca_cq.c b/drivers/infiniband/hw/ehca/ehca_cq.c index 79c25f51c21e..0467c158d4a9 100644 --- a/drivers/infiniband/hw/ehca/ehca_cq.c +++ b/drivers/infiniband/hw/ehca/ehca_cq.c @@ -246,7 +246,7 @@ struct ib_cq *ehca_create_cq(struct ib_device *device, int cqe, int comp_vector, } else { if (h_ret != H_PAGE_REGISTERED) { ehca_err(device, "Registration of page failed " - "ehca_cq=%p cq_num=%x h_ret=%li" + "ehca_cq=%p cq_num=%x h_ret=%li " "counter=%i act_pages=%i", my_cq, my_cq->cq_number, h_ret, counter, param.act_pages); diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c index eff5fb55604b..f116eb7c0b11 100644 --- a/drivers/infiniband/hw/ehca/ehca_qp.c +++ b/drivers/infiniband/hw/ehca/ehca_qp.c @@ -858,7 +858,7 @@ struct ib_srq *ehca_create_srq(struct ib_pd *pd, update_mask, mqpcb, my_qp->galpas.kernel); if (hret != H_SUCCESS) { - ehca_err(pd->device, "Could not modify SRQ to INIT" + ehca_err(pd->device, "Could not modify SRQ to INIT " "ehca_qp=%p qp_num=%x h_ret=%li", my_qp, my_qp->real_qp_num, hret); goto create_srq2; @@ -872,7 +872,7 @@ struct ib_srq *ehca_create_srq(struct ib_pd *pd, update_mask, mqpcb, my_qp->galpas.kernel); if (hret != H_SUCCESS) { - ehca_err(pd->device, "Could not enable SRQ" + ehca_err(pd->device, "Could not enable SRQ " "ehca_qp=%p qp_num=%x h_ret=%li", my_qp, my_qp->real_qp_num, hret); goto create_srq2; @@ -886,7 +886,7 @@ struct ib_srq *ehca_create_srq(struct ib_pd *pd, update_mask, mqpcb, my_qp->galpas.kernel); if (hret != H_SUCCESS) { - ehca_err(pd->device, "Could not modify SRQ to RTR" + ehca_err(pd->device, "Could not modify SRQ to RTR " "ehca_qp=%p qp_num=%x h_ret=%li", my_qp, my_qp->real_qp_num, hret); goto create_srq2; diff --git a/drivers/infiniband/ulp/iser/iser_initiator.c b/drivers/infiniband/ulp/iser/iser_initiator.c index a6f2303ed14a..ba1b455949c0 100644 --- a/drivers/infiniband/ulp/iser/iser_initiator.c +++ b/drivers/infiniband/ulp/iser/iser_initiator.c @@ -561,7 +561,7 @@ void iser_rcv_completion(struct iser_desc *rx_desc, if (opcode == ISCSI_OP_SCSI_CMD_RSP) { itt = get_itt(hdr->itt); /* mask out cid and age bits */ if (!(itt < session->cmds_max)) - iser_err("itt can't be matched to task!!!" + iser_err("itt can't be matched to task!!! " "conn %p opcode %d cmds_max %d itt %d\n", conn->iscsi_conn,opcode,session->cmds_max,itt); /* use the mapping given with the cmds array indexed by itt */ -- cgit v1.2.3-59-g8ed1b From 7f049f2f4259e4a5c213720df1ce0c2ca095641a Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Mon, 26 Nov 2007 11:28:44 -0600 Subject: RDMA/cxgb3: Hold rtnl_lock() around ethtool get_drvinfo call Currently the call into cxgb3 to get the driver info is not serialized. The iw_cxgb3 module needs to hold the rtnl_lock around the ethtool ops call like dev_ioctl() does. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb3/iwch_provider.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c index b5436ca92e68..69b1204e05f0 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_provider.c +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c @@ -39,6 +39,7 @@ #include #include #include +#include #include #include @@ -1053,7 +1054,9 @@ static ssize_t show_fw_ver(struct class_device *cdev, char *buf) struct net_device *lldev = dev->rdev.t3cdev_p->lldev; PDBG("%s class dev 0x%p\n", __FUNCTION__, cdev); + rtnl_lock(); lldev->ethtool_ops->get_drvinfo(lldev, &info); + rtnl_unlock(); return sprintf(buf, "%s\n", info.fw_version); } @@ -1065,7 +1068,9 @@ static ssize_t show_hca(struct class_device *cdev, char *buf) struct net_device *lldev = dev->rdev.t3cdev_p->lldev; PDBG("%s class dev 0x%p\n", __FUNCTION__, cdev); + rtnl_lock(); lldev->ethtool_ops->get_drvinfo(lldev, &info); + rtnl_unlock(); return sprintf(buf, "%s\n", info.driver); } -- cgit v1.2.3-59-g8ed1b From 457fe7b8a6822907cbe65897dc81b83d9df5bcbf Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Mon, 26 Nov 2007 11:28:46 -0600 Subject: RDMA/cxgb3: Support version 5.0 firmware The 5.0 firmware now supports translating sgls in recv work requests, so remove the host driver logic currently doing the translation. Note: this change requires 5.0 firmware. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb3/iwch_qp.c | 21 ++------------------- 1 file changed, 2 insertions(+), 19 deletions(-) diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c index dd89b6b91f9c..9bb811256b28 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_qp.c +++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c @@ -208,36 +208,19 @@ static int iwch_sgl2pbl_map(struct iwch_dev *rhp, struct ib_sge *sg_list, static int iwch_build_rdma_recv(struct iwch_dev *rhp, union t3_wr *wqe, struct ib_recv_wr *wr) { - int i, err = 0; - u32 pbl_addr[4]; - u8 page_size[4]; + int i; if (wr->num_sge > T3_MAX_SGE) return -EINVAL; - err = iwch_sgl2pbl_map(rhp, wr->sg_list, wr->num_sge, pbl_addr, - page_size); - if (err) - return err; - wqe->recv.pagesz[0] = page_size[0]; - wqe->recv.pagesz[1] = page_size[1]; - wqe->recv.pagesz[2] = page_size[2]; - wqe->recv.pagesz[3] = page_size[3]; wqe->recv.num_sgle = cpu_to_be32(wr->num_sge); for (i = 0; i < wr->num_sge; i++) { wqe->recv.sgl[i].stag = cpu_to_be32(wr->sg_list[i].lkey); wqe->recv.sgl[i].len = cpu_to_be32(wr->sg_list[i].length); - - /* to in the WQE == the offset into the page */ - wqe->recv.sgl[i].to = cpu_to_be64(((u32) wr->sg_list[i].addr) % - (1UL << (12 + page_size[i]))); - - /* pbl_addr is the adapters address in the PBL */ - wqe->recv.pbl_addr[i] = cpu_to_be32(pbl_addr[i]); + wqe->recv.sgl[i].to = cpu_to_be64(wr->sg_list[i].addr); } for (; i < T3_MAX_SGE; i++) { wqe->recv.sgl[i].stag = 0; wqe->recv.sgl[i].len = 0; wqe->recv.sgl[i].to = 0; - wqe->recv.pbl_addr[i] = 0; } return 0; } -- cgit v1.2.3-59-g8ed1b From 9ab4295d1d9ab10a249aea002060685f935a528c Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Fri, 12 Oct 2007 20:48:06 -0700 Subject: IB/ipath: Remove dead code for user process waiting for send buffer At one point in time there was code to allow a user process to wait for a send buffer if none were available. This feature was never used and most of the code was removed. This removes some missed unused code. Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_intr.c | 26 -------------------------- drivers/infiniband/hw/ipath/ipath_kernel.h | 4 ---- 2 files changed, 30 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c index 8f3718c1694f..ad41cccd2e9f 100644 --- a/drivers/infiniband/hw/ipath/ipath_intr.c +++ b/drivers/infiniband/hw/ipath/ipath_intr.c @@ -920,29 +920,6 @@ static noinline void ipath_bad_regread(struct ipath_devdata *dd) } } -static void handle_port_pioavail(struct ipath_devdata *dd) -{ - u32 i; - /* - * start from port 1, since for now port 0 is never using - * wait_event for PIO - */ - for (i = 1; dd->ipath_portpiowait && i < dd->ipath_cfgports; i++) { - struct ipath_portdata *pd = dd->ipath_pd[i]; - - if (pd && pd->port_cnt && - dd->ipath_portpiowait & (1U << i)) { - clear_bit(i, &dd->ipath_portpiowait); - if (test_bit(IPATH_PORT_WAITING_PIO, - &pd->port_flag)) { - clear_bit(IPATH_PORT_WAITING_PIO, - &pd->port_flag); - wake_up_interruptible(&pd->port_wait); - } - } - } -} - static void handle_layer_pioavail(struct ipath_devdata *dd) { int ret; @@ -1195,9 +1172,6 @@ irqreturn_t ipath_intr(int irq, void *data) ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl); - if (dd->ipath_portpiowait) - handle_port_pioavail(dd); - handle_layer_pioavail(dd); } diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h index 1ef82d6bf377..65f7c7f7b5d9 100644 --- a/drivers/infiniband/hw/ipath/ipath_kernel.h +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -457,8 +457,6 @@ struct ipath_devdata { unsigned long ipath_rcvctrl; /* shadow kr_sendctrl */ unsigned long ipath_sendctrl; - /* ports waiting for PIOavail intr */ - unsigned long ipath_portpiowait; unsigned long ipath_lastcancel; /* to not count armlaunch after cancel */ /* value we put in kr_rcvhdrcnt */ @@ -759,8 +757,6 @@ int ipath_set_rx_pol_inv(struct ipath_devdata *dd, u8 new_pol_inv); /* portdata flag bit offsets */ /* waiting for a packet to arrive */ #define IPATH_PORT_WAITING_RCV 2 - /* waiting for a PIO buffer to be available */ -#define IPATH_PORT_WAITING_PIO 3 /* master has not finished initializing */ #define IPATH_PORT_MASTER_UNINIT 4 /* waiting for an urgent packet to arrive */ -- cgit v1.2.3-59-g8ed1b From e342c119172f87f2d812bccfd0283f62e1bc1c2a Mon Sep 17 00:00:00 2001 From: John Gregor Date: Wed, 5 Sep 2007 01:57:14 -0700 Subject: IB/ipath: Fix sendctrl locking Code review pointed out that the locking around uses of ipath_sendctrl and kr_sendctrl were, in several places, incorrect and/or inconsistent. Signed-off-by: John Gregor Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_driver.c | 40 +++++++++++++++++---------- drivers/infiniband/hw/ipath/ipath_file_ops.c | 10 +++++-- drivers/infiniband/hw/ipath/ipath_init_chip.c | 24 ++++++++++------ drivers/infiniband/hw/ipath/ipath_intr.c | 19 +++++++++++-- drivers/infiniband/hw/ipath/ipath_kernel.h | 1 + drivers/infiniband/hw/ipath/ipath_ruc.c | 7 ++++- 6 files changed, 72 insertions(+), 29 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c index fc355981bbab..6a48442a8d59 100644 --- a/drivers/infiniband/hw/ipath/ipath_driver.c +++ b/drivers/infiniband/hw/ipath/ipath_driver.c @@ -803,31 +803,37 @@ void ipath_disarm_piobufs(struct ipath_devdata *dd, unsigned first, unsigned cnt) { unsigned i, last = first + cnt; - u64 sendctrl, sendorig; + unsigned long flags; ipath_cdbg(PKT, "disarm %u PIObufs first=%u\n", cnt, first); - sendorig = dd->ipath_sendctrl; for (i = first; i < last; i++) { - sendctrl = sendorig | INFINIPATH_S_DISARM | - (i << INFINIPATH_S_DISARMPIOBUF_SHIFT); + spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags); + /* + * The disarm-related bits are write-only, so it + * is ok to OR them in with our copy of sendctrl + * while we hold the lock. + */ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, - sendctrl); + dd->ipath_sendctrl | INFINIPATH_S_DISARM | + (i << INFINIPATH_S_DISARMPIOBUF_SHIFT)); + /* can't disarm bufs back-to-back per iba7220 spec */ + ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); + spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags); } /* - * Write it again with current value, in case ipath_sendctrl changed - * while we were looping; no critical bits that would require - * locking. - * - * disable PIOAVAILUPD, then re-enable, reading scratch in + * Disable PIOAVAILUPD, then re-enable, reading scratch in * between. This seems to avoid a chip timing race that causes - * pioavail updates to memory to stop. + * pioavail updates to memory to stop. We xor as we don't + * know the state of the bit when we're called. */ + spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags); ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, - sendorig & ~INFINIPATH_S_PIOBUFAVAILUPD); - sendorig = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); + dd->ipath_sendctrl ^ INFINIPATH_S_PIOBUFAVAILUPD); + ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl); + spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags); } /** @@ -2056,6 +2062,8 @@ void ipath_set_led_override(struct ipath_devdata *dd, unsigned int val) */ void ipath_shutdown_device(struct ipath_devdata *dd) { + unsigned long flags; + ipath_dbg("Shutting down the device\n"); dd->ipath_flags |= IPATH_LINKUNK; @@ -2076,9 +2084,13 @@ void ipath_shutdown_device(struct ipath_devdata *dd) * gracefully stop all sends allowing any in progress to trickle out * first. */ - ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, 0ULL); + spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags); + dd->ipath_sendctrl = 0; + ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl); /* flush it */ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); + spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags); + /* * enough for anything that's going to trickle out to have actually * done so. diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c index 5de3243a47c3..92dae6f5b395 100644 --- a/drivers/infiniband/hw/ipath/ipath_file_ops.c +++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c @@ -2149,11 +2149,15 @@ static int ipath_get_slave_info(struct ipath_portdata *pd, static int ipath_force_pio_avail_update(struct ipath_devdata *dd) { - u64 reg = dd->ipath_sendctrl; + unsigned long flags; - clear_bit(IPATH_S_PIOBUFAVAILUPD, ®); - ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, reg); + spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags); + ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, + dd->ipath_sendctrl & ~INFINIPATH_S_PIOBUFAVAILUPD); + ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl); + ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); + spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags); return 0; } diff --git a/drivers/infiniband/hw/ipath/ipath_init_chip.c b/drivers/infiniband/hw/ipath/ipath_init_chip.c index 9e9d6fafcf0d..1c65ab907a33 100644 --- a/drivers/infiniband/hw/ipath/ipath_init_chip.c +++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c @@ -345,7 +345,7 @@ static int init_chip_first(struct ipath_devdata *dd, dd->ipath_piobcnt2k, dd->ipath_pio2kbase); spin_lock_init(&dd->ipath_tid_lock); - + spin_lock_init(&dd->ipath_sendctrl_lock); spin_lock_init(&dd->ipath_gpio_lock); spin_lock_init(&dd->ipath_eep_st_lock); mutex_init(&dd->ipath_eep_lock); @@ -372,9 +372,9 @@ static int init_chip_reset(struct ipath_devdata *dd, *pdp = dd->ipath_pd[0]; /* ensure chip does no sends or receives while we re-initialize */ dd->ipath_control = dd->ipath_sendctrl = dd->ipath_rcvctrl = 0U; - ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl, 0); - ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, 0); - ipath_write_kreg(dd, dd->ipath_kregs->kr_control, 0); + ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl, dd->ipath_rcvctrl); + ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl); + ipath_write_kreg(dd, dd->ipath_kregs->kr_control, dd->ipath_control); rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_portcnt); if (dd->ipath_portcnt != rtmp) @@ -487,6 +487,7 @@ static void enable_chip(struct ipath_devdata *dd, struct ipath_portdata *pd, int reinit) { u32 val; + unsigned long flags; int i; if (!reinit) @@ -495,11 +496,13 @@ static void enable_chip(struct ipath_devdata *dd, ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl, dd->ipath_rcvctrl); + spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags); /* Enable PIO send, and update of PIOavail regs to memory. */ dd->ipath_sendctrl = INFINIPATH_S_PIOENABLE | INFINIPATH_S_PIOBUFAVAILUPD; - ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, - dd->ipath_sendctrl); + ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl); + ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); + spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags); /* * enable port 0 receive, and receive interrupt. other ports @@ -696,6 +699,7 @@ int ipath_init_chip(struct ipath_devdata *dd, int reinit) u64 val; struct ipath_portdata *pd = NULL; /* keep gcc4 happy */ gfp_t gfp_flags = GFP_USER | __GFP_COMP; + unsigned long flags; ret = init_housekeeping(dd, &pd, reinit); if (ret) @@ -827,8 +831,12 @@ int ipath_init_chip(struct ipath_devdata *dd, int reinit) ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear, ~0ULL&~INFINIPATH_HWE_MEMBISTFAILED); ipath_write_kreg(dd, dd->ipath_kregs->kr_control, 0ULL); - ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, - INFINIPATH_S_PIOENABLE); + + spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags); + dd->ipath_sendctrl = INFINIPATH_S_PIOENABLE; + ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl); + ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); + spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags); /* * before error clears, since we expect serdes pll errors during diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c index ad41cccd2e9f..eac2e9c55281 100644 --- a/drivers/infiniband/hw/ipath/ipath_intr.c +++ b/drivers/infiniband/hw/ipath/ipath_intr.c @@ -795,6 +795,7 @@ void ipath_clear_freeze(struct ipath_devdata *dd) { int i, im; __le64 val; + unsigned long flags; /* disable error interrupts, to avoid confusion */ ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask, 0ULL); @@ -813,11 +814,14 @@ void ipath_clear_freeze(struct ipath_devdata *dd) dd->ipath_control); /* ensure pio avail updates continue */ + spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags); ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl & ~INFINIPATH_S_PIOBUFAVAILUPD); ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, - dd->ipath_sendctrl); + dd->ipath_sendctrl); + ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); + spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags); /* * We just enabled pioavailupdate, so dma copy is almost certainly @@ -922,6 +926,7 @@ static noinline void ipath_bad_regread(struct ipath_devdata *dd) static void handle_layer_pioavail(struct ipath_devdata *dd) { + unsigned long flags; int ret; ret = ipath_ib_piobufavail(dd->verbs_dev); @@ -930,9 +935,12 @@ static void handle_layer_pioavail(struct ipath_devdata *dd) return; set: - set_bit(IPATH_S_PIOINTBUFAVAIL, &dd->ipath_sendctrl); + spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags); + dd->ipath_sendctrl |= INFINIPATH_S_PIOINTBUFAVAIL; ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl); + ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); + spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags); } /* @@ -1168,9 +1176,14 @@ irqreturn_t ipath_intr(int irq, void *data) handle_urcv(dd, istat); if (istat & INFINIPATH_I_SPIOBUFAVAIL) { - clear_bit(IPATH_S_PIOINTBUFAVAIL, &dd->ipath_sendctrl); + unsigned long flags; + + spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags); + dd->ipath_sendctrl &= ~INFINIPATH_S_PIOINTBUFAVAIL; ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl); + ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); + spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags); handle_layer_pioavail(dd); } diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h index 65f7c7f7b5d9..81759c2031f9 100644 --- a/drivers/infiniband/hw/ipath/ipath_kernel.h +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -376,6 +376,7 @@ struct ipath_devdata { dma_addr_t *ipath_physshadow; /* lock to workaround chip bug 9437 */ spinlock_t ipath_tid_lock; + spinlock_t ipath_sendctrl_lock; /* * IPATH_STATUS_*, diff --git a/drivers/infiniband/hw/ipath/ipath_ruc.c b/drivers/infiniband/hw/ipath/ipath_ruc.c index 54c61a972de2..1b4f7e113b21 100644 --- a/drivers/infiniband/hw/ipath/ipath_ruc.c +++ b/drivers/infiniband/hw/ipath/ipath_ruc.c @@ -479,9 +479,14 @@ done: static void want_buffer(struct ipath_devdata *dd) { - set_bit(IPATH_S_PIOINTBUFAVAIL, &dd->ipath_sendctrl); + unsigned long flags; + + spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags); + dd->ipath_sendctrl |= INFINIPATH_S_PIOINTBUFAVAIL; ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl); + ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch); + spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags); } /** -- cgit v1.2.3-59-g8ed1b From 733d12813bd36ed7c727686ac1164f92f87a14a2 Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Thu, 8 Nov 2007 19:53:01 -0800 Subject: IB/ipath: Fix error returned from ib_resize_cq if new size smaller than # entries The gen2_basic tests check for the errno value when a CQ is resized smaller than the number of outstanding completions queue on the CQ. This patch changes ib_ipath to return EINVAL which is what ib_mthca returns and what gen2_basic expects. Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_cq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/ipath/ipath_cq.c b/drivers/infiniband/hw/ipath/ipath_cq.c index d1380c7a1703..a03bd28d9b48 100644 --- a/drivers/infiniband/hw/ipath/ipath_cq.c +++ b/drivers/infiniband/hw/ipath/ipath_cq.c @@ -421,7 +421,7 @@ int ipath_resize_cq(struct ib_cq *ibcq, int cqe, struct ib_udata *udata) else n = head - tail; if (unlikely((u32)cqe < n)) { - ret = -EOVERFLOW; + ret = -EINVAL; goto bail_unlock; } for (n = 0; tail != head; n++) { -- cgit v1.2.3-59-g8ed1b From 6276980138292056aab162f7eb98afe5243b2976 Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Mon, 26 Nov 2007 23:44:15 -0800 Subject: IB/ipath: Fix comments for ipath_create_srq() During a code review, someone noticed the comments didn't match the code. Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_srq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_srq.c b/drivers/infiniband/hw/ipath/ipath_srq.c index 2fef36f4b675..f772102e4713 100644 --- a/drivers/infiniband/hw/ipath/ipath_srq.c +++ b/drivers/infiniband/hw/ipath/ipath_srq.c @@ -94,8 +94,8 @@ bail: /** * ipath_create_srq - create a shared receive queue * @ibpd: the protection domain of the SRQ to create - * @attr: the attributes of the SRQ - * @udata: not used by the InfiniPath verbs driver + * @srq_init_attr: the attributes of the SRQ + * @udata: data from libipathverbs when creating a user SRQ */ struct ib_srq *ipath_create_srq(struct ib_pd *ibpd, struct ib_srq_init_attr *srq_init_attr, -- cgit v1.2.3-59-g8ed1b From 2f01a7001131bbf3ce1e39252bf72aea2da034df Mon Sep 17 00:00:00 2001 From: Arthur Jones Date: Wed, 17 Oct 2007 18:18:29 -0700 Subject: IB/ipath: Better comment for rmb() in ipath_intr() An internal code review found the comment here lacking -- update it with more specifics of how and why the rmb() is there. Signed-off-by: Arthur Jones Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_intr.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c index eac2e9c55281..4795cb895f85 100644 --- a/drivers/infiniband/hw/ipath/ipath_intr.c +++ b/drivers/infiniband/hw/ipath/ipath_intr.c @@ -954,7 +954,15 @@ static void handle_urcv(struct ipath_devdata *dd, u32 istat) int i; int rcvdint = 0; - /* test_bit below needs this... */ + /* + * test_and_clear_bit(IPATH_PORT_WAITING_RCV) and + * test_and_clear_bit(IPATH_PORT_WAITING_URG) below + * would both like timely updates of the bits so that + * we don't pass them by unnecessarily. the rmb() + * here ensures that we see them promptly -- the + * corresponding wmb()'s are in ipath_poll_urgent() + * and ipath_poll_next()... + */ rmb(); portr = ((istat >> INFINIPATH_I_RCVAVAIL_SHIFT) & dd->ipath_i_rcvavail_mask) -- cgit v1.2.3-59-g8ed1b From a2f76cd69f4913079cad10670f8520ffe07f4067 Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Fri, 2 Nov 2007 17:40:36 -0700 Subject: IB/ipath: Add the work completion error code to the QP error debug output Add the work completion error code to the QP error debug output. This makes it easier to determine the cause of the error. Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_qp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_qp.c b/drivers/infiniband/hw/ipath/ipath_qp.c index b997ff88401b..b405906974ca 100644 --- a/drivers/infiniband/hw/ipath/ipath_qp.c +++ b/drivers/infiniband/hw/ipath/ipath_qp.c @@ -387,8 +387,8 @@ int ipath_error_qp(struct ipath_qp *qp, enum ib_wc_status err) struct ib_wc wc; int ret = 0; - ipath_dbg("QP%d/%d in error state\n", - qp->ibqp.qp_num, qp->remote_qpn); + ipath_dbg("QP%d/%d in error state (%d)\n", + qp->ibqp.qp_num, qp->remote_qpn, err); spin_lock(&dev->pending_lock); /* XXX What if its already removed by the timeout code? */ -- cgit v1.2.3-59-g8ed1b From 3c8450860ba9d6279dbc969633eacf99161860d9 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Thu, 13 Dec 2007 15:58:57 -0800 Subject: IB/ipath: Convert from .nopage to .fault Signed-off-by: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_debug.h | 4 ++-- drivers/infiniband/hw/ipath/ipath_file_ops.c | 29 ++++++++++------------------ 2 files changed, 12 insertions(+), 21 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_debug.h b/drivers/infiniband/hw/ipath/ipath_debug.h index 19c56e6491eb..d6f69532d83f 100644 --- a/drivers/infiniband/hw/ipath/ipath_debug.h +++ b/drivers/infiniband/hw/ipath/ipath_debug.h @@ -55,7 +55,7 @@ #define __IPATH_PKTDBG 0x80 /* print packet data */ /* print process startup (init)/exit messages */ #define __IPATH_PROCDBG 0x100 -/* print mmap/nopage stuff, not using VDBG any more */ +/* print mmap/fault stuff, not using VDBG any more */ #define __IPATH_MMDBG 0x200 #define __IPATH_ERRPKTDBG 0x400 #define __IPATH_USER_SEND 0x1000 /* use user mode send */ @@ -81,7 +81,7 @@ #define __IPATH_VERBDBG 0x0 /* very verbose debug */ #define __IPATH_PKTDBG 0x0 /* print packet data */ #define __IPATH_PROCDBG 0x0 /* process startup (init)/exit messages */ -/* print mmap/nopage stuff, not using VDBG any more */ +/* print mmap/fault stuff, not using VDBG any more */ #define __IPATH_MMDBG 0x0 #define __IPATH_EPKTDBG 0x0 /* print ethernet packet data */ #define __IPATH_IPATHDBG 0x0 /* Ethernet (IPATH) table dump on */ diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c index 92dae6f5b395..e7fbb31a48a0 100644 --- a/drivers/infiniband/hw/ipath/ipath_file_ops.c +++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c @@ -1120,33 +1120,24 @@ bail: } /* - * ipath_file_vma_nopage - handle a VMA page fault. + * ipath_file_vma_fault - handle a VMA page fault. */ -static struct page *ipath_file_vma_nopage(struct vm_area_struct *vma, - unsigned long address, int *type) +static int ipath_file_vma_fault(struct vm_area_struct *vma, + struct vm_fault *vmf) { - unsigned long offset = address - vma->vm_start; - struct page *page = NOPAGE_SIGBUS; - void *pageptr; + struct page *page; - /* - * Convert the vmalloc address into a struct page. - */ - pageptr = (void *)(offset + (vma->vm_pgoff << PAGE_SHIFT)); - page = vmalloc_to_page(pageptr); + page = vmalloc_to_page((void *)(vmf->pgoff << PAGE_SHIFT)); if (!page) - goto out; - - /* Increment the reference count. */ + return VM_FAULT_SIGBUS; get_page(page); - if (type) - *type = VM_FAULT_MINOR; -out: - return page; + vmf->page = page; + + return 0; } static struct vm_operations_struct ipath_file_vm_ops = { - .nopage = ipath_file_vma_nopage, + .fault = ipath_file_vma_fault, }; static int mmap_kvaddr(struct vm_area_struct *vma, u64 pgaddr, -- cgit v1.2.3-59-g8ed1b From 5920869f1ec263fee4255ec71d333c118406a419 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Mon, 10 Dec 2007 05:25:23 +0200 Subject: mlx4_core: Fix max_eqs masking in QUERY_DEV_CAP log_max_eqs is a 4-bit field, not a 3-bit field in the response to the QUERY_DEV_CAP FW command, so we should mask with 0xf instead of 0x7 when reading it. Found by Yossi Leybovitch of Mellanox. Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/net/mlx4/fw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/mlx4/fw.c b/drivers/net/mlx4/fw.c index 50648738d679..535a4461d88c 100644 --- a/drivers/net/mlx4/fw.c +++ b/drivers/net/mlx4/fw.c @@ -202,7 +202,7 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) MLX4_GET(field, outbox, QUERY_DEV_CAP_RSVD_EQ_OFFSET); dev_cap->reserved_eqs = 1 << (field & 0xf); MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_EQ_OFFSET); - dev_cap->max_eqs = 1 << (field & 0x7); + dev_cap->max_eqs = 1 << (field & 0xf); MLX4_GET(field, outbox, QUERY_DEV_CAP_RSVD_MTT_OFFSET); dev_cap->reserved_mtts = 1 << (field >> 4); MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_MRW_SZ_OFFSET); -- cgit v1.2.3-59-g8ed1b From 94545e8c51fbf01d1c1cda7e6d017598d41e840a Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 17 Dec 2007 11:30:36 -0800 Subject: IB: Spelling fixes in comments Signed-off-by: Joe Perches Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb3/cxio_hal.c | 2 +- drivers/infiniband/hw/ehca/ehca_av.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c index eec6a30840ca..26b8c0e1cfd7 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_hal.c +++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c @@ -584,7 +584,7 @@ static int cxio_hal_ctrl_qp_write_mem(struct cxio_rdev *rdev_p, u32 addr, { u32 i, nr_wqe, copy_len; u8 *copy_data; - u8 wr_len, utx_len; /* lenght in 8 byte flit */ + u8 wr_len, utx_len; /* length in 8 byte flit */ enum t3_wr_flags flag; __be64 *wqe; u64 utx_cmd; diff --git a/drivers/infiniband/hw/ehca/ehca_av.c b/drivers/infiniband/hw/ehca/ehca_av.c index f7782c882ab4..194c1c30cf63 100644 --- a/drivers/infiniband/hw/ehca/ehca_av.c +++ b/drivers/infiniband/hw/ehca/ehca_av.c @@ -1,7 +1,7 @@ /* * IBM eServer eHCA Infiniband device driver for Linux on POWER * - * adress vector functions + * address vector functions * * Authors: Hoang-Nam Nguyen * Khadija Souissi -- cgit v1.2.3-59-g8ed1b From 547af76521b3fd4b9ec5c9a9975a17eadb95e6f6 Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Mon, 22 Oct 2007 21:52:54 -0700 Subject: IB/multicast: Report errors on multicast groups if P_key changes P_key changes can invalidate multicast groups. Report errors on all multicast groups affected by a pkey change. Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier --- drivers/infiniband/core/multicast.c | 55 ++++++++++++++++++++++++++++++------- 1 file changed, 45 insertions(+), 10 deletions(-) diff --git a/drivers/infiniband/core/multicast.c b/drivers/infiniband/core/multicast.c index 1bc1fe605282..107f170c57cd 100644 --- a/drivers/infiniband/core/multicast.c +++ b/drivers/infiniband/core/multicast.c @@ -73,11 +73,20 @@ struct mcast_device { }; enum mcast_state { - MCAST_IDLE, MCAST_JOINING, MCAST_MEMBER, + MCAST_ERROR, +}; + +enum mcast_group_state { + MCAST_IDLE, MCAST_BUSY, - MCAST_ERROR + MCAST_GROUP_ERROR, + MCAST_PKEY_EVENT +}; + +enum { + MCAST_INVALID_PKEY_INDEX = 0xFFFF }; struct mcast_member; @@ -93,9 +102,10 @@ struct mcast_group { struct mcast_member *last_join; int members[3]; atomic_t refcount; - enum mcast_state state; + enum mcast_group_state state; struct ib_sa_query *query; int query_id; + u16 pkey_index; }; struct mcast_member { @@ -378,9 +388,19 @@ static int fail_join(struct mcast_group *group, struct mcast_member *member, static void process_group_error(struct mcast_group *group) { struct mcast_member *member; - int ret; + int ret = 0; + u16 pkey_index; + + if (group->state == MCAST_PKEY_EVENT) + ret = ib_find_pkey(group->port->dev->device, + group->port->port_num, + be16_to_cpu(group->rec.pkey), &pkey_index); spin_lock_irq(&group->lock); + if (group->state == MCAST_PKEY_EVENT && !ret && + group->pkey_index == pkey_index) + goto out; + while (!list_empty(&group->active_list)) { member = list_entry(group->active_list.next, struct mcast_member, list); @@ -399,6 +419,7 @@ static void process_group_error(struct mcast_group *group) } group->rec.join_state = 0; +out: group->state = MCAST_BUSY; spin_unlock_irq(&group->lock); } @@ -415,9 +436,9 @@ static void mcast_work_handler(struct work_struct *work) retest: spin_lock_irq(&group->lock); while (!list_empty(&group->pending_list) || - (group->state == MCAST_ERROR)) { + (group->state != MCAST_BUSY)) { - if (group->state == MCAST_ERROR) { + if (group->state != MCAST_BUSY) { spin_unlock_irq(&group->lock); process_group_error(group); goto retest; @@ -494,12 +515,19 @@ static void join_handler(int status, struct ib_sa_mcmember_rec *rec, void *context) { struct mcast_group *group = context; + u16 pkey_index = MCAST_INVALID_PKEY_INDEX; if (status) process_join_error(group, status); else { + ib_find_pkey(group->port->dev->device, group->port->port_num, + be16_to_cpu(rec->pkey), &pkey_index); + spin_lock_irq(&group->port->lock); group->rec = *rec; + if (group->state == MCAST_BUSY && + group->pkey_index == MCAST_INVALID_PKEY_INDEX) + group->pkey_index = pkey_index; if (!memcmp(&mgid0, &group->rec.mgid, sizeof mgid0)) { rb_erase(&group->node, &group->port->table); mcast_insert(group->port, group, 1); @@ -539,6 +567,7 @@ static struct mcast_group *acquire_group(struct mcast_port *port, group->port = port; group->rec.mgid = *mgid; + group->pkey_index = MCAST_INVALID_PKEY_INDEX; INIT_LIST_HEAD(&group->pending_list); INIT_LIST_HEAD(&group->active_list); INIT_WORK(&group->work, mcast_work_handler); @@ -707,7 +736,8 @@ int ib_init_ah_from_mcmember(struct ib_device *device, u8 port_num, } EXPORT_SYMBOL(ib_init_ah_from_mcmember); -static void mcast_groups_lost(struct mcast_port *port) +static void mcast_groups_event(struct mcast_port *port, + enum mcast_group_state state) { struct mcast_group *group; struct rb_node *node; @@ -721,7 +751,8 @@ static void mcast_groups_lost(struct mcast_port *port) atomic_inc(&group->refcount); queue_work(mcast_wq, &group->work); } - group->state = MCAST_ERROR; + if (group->state != MCAST_GROUP_ERROR) + group->state = state; spin_unlock(&group->lock); } spin_unlock_irqrestore(&port->lock, flags); @@ -731,16 +762,20 @@ static void mcast_event_handler(struct ib_event_handler *handler, struct ib_event *event) { struct mcast_device *dev; + int index; dev = container_of(handler, struct mcast_device, event_handler); + index = event->element.port_num - dev->start_port; switch (event->event) { case IB_EVENT_PORT_ERR: case IB_EVENT_LID_CHANGE: case IB_EVENT_SM_CHANGE: case IB_EVENT_CLIENT_REREGISTER: - mcast_groups_lost(&dev->port[event->element.port_num - - dev->start_port]); + mcast_groups_event(&dev->port[index], MCAST_GROUP_ERROR); + break; + case IB_EVENT_PKEY_CHANGE: + mcast_groups_event(&dev->port[index], MCAST_PKEY_EVENT); break; default: break; -- cgit v1.2.3-59-g8ed1b From 4fc8cd4919428f9b86f0b65e2f3245a1c186737f Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Tue, 27 Nov 2007 00:11:04 -0800 Subject: IB/mad: Report number of times a mad was retried To allow ULPs to tune timeout values and capture retry statistics, report the number of times that a mad send operation was retried. For RMPP mads, report the total number of times that the any portion (send window) of the send operation was retried. Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier --- drivers/infiniband/core/mad.c | 9 +++++++-- drivers/infiniband/core/mad_priv.h | 3 ++- drivers/infiniband/core/mad_rmpp.c | 2 +- include/rdma/ib_mad.h | 4 +++- 4 files changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index 649335a03312..5eace995836d 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -1100,7 +1100,9 @@ int ib_post_send_mad(struct ib_mad_send_buf *send_buf, mad_send_wr->tid = ((struct ib_mad_hdr *) send_buf->mad)->tid; /* Timeout will be updated after send completes */ mad_send_wr->timeout = msecs_to_jiffies(send_buf->timeout_ms); - mad_send_wr->retries = send_buf->retries; + mad_send_wr->max_retries = send_buf->retries; + mad_send_wr->retries_left = send_buf->retries; + send_buf->retries = 0; /* Reference for work request to QP + response */ mad_send_wr->refcount = 1 + (mad_send_wr->timeout > 0); mad_send_wr->status = IB_WC_SUCCESS; @@ -2436,9 +2438,12 @@ static int retry_send(struct ib_mad_send_wr_private *mad_send_wr) { int ret; - if (!mad_send_wr->retries--) + if (!mad_send_wr->retries_left) return -ETIMEDOUT; + mad_send_wr->retries_left--; + mad_send_wr->send_buf.retries++; + mad_send_wr->timeout = msecs_to_jiffies(mad_send_wr->send_buf.timeout_ms); if (mad_send_wr->mad_agent_priv->agent.rmpp_version) { diff --git a/drivers/infiniband/core/mad_priv.h b/drivers/infiniband/core/mad_priv.h index 9be5cc00a3a9..8b75010016ec 100644 --- a/drivers/infiniband/core/mad_priv.h +++ b/drivers/infiniband/core/mad_priv.h @@ -131,7 +131,8 @@ struct ib_mad_send_wr_private { struct ib_sge sg_list[IB_MAD_SEND_REQ_MAX_SG]; __be64 tid; unsigned long timeout; - int retries; + int max_retries; + int retries_left; int retry; int refcount; enum ib_wc_status status; diff --git a/drivers/infiniband/core/mad_rmpp.c b/drivers/infiniband/core/mad_rmpp.c index d43bc62005b3..a5e2a310f312 100644 --- a/drivers/infiniband/core/mad_rmpp.c +++ b/drivers/infiniband/core/mad_rmpp.c @@ -684,7 +684,7 @@ static void process_rmpp_ack(struct ib_mad_agent_private *agent, if (seg_num > mad_send_wr->last_ack) { adjust_last_ack(mad_send_wr, seg_num); - mad_send_wr->retries = mad_send_wr->send_buf.retries; + mad_send_wr->retries_left = mad_send_wr->max_retries; } mad_send_wr->newwin = newwin; if (mad_send_wr->last_ack == mad_send_wr->send_buf.seg_count) { diff --git a/include/rdma/ib_mad.h b/include/rdma/ib_mad.h index 8ec3799e42e1..7228c056b9e9 100644 --- a/include/rdma/ib_mad.h +++ b/include/rdma/ib_mad.h @@ -230,7 +230,9 @@ struct ib_class_port_info * @seg_count: The number of RMPP segments allocated for this send. * @seg_size: Size of each RMPP segment. * @timeout_ms: Time to wait for a response. - * @retries: Number of times to retry a request for a response. + * @retries: Number of times to retry a request for a response. For MADs + * using RMPP, this applies per window. On completion, returns the number + * of retries needed to complete the transfer. * * Users are responsible for initializing the MAD buffer itself, with the * exception of any RMPP header. Additional segment buffer space allocated -- cgit v1.2.3-59-g8ed1b From 9af57b7a2702f2cdf6ae499612e90b0f84bcb393 Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Mon, 16 Jul 2007 21:49:35 -0700 Subject: IB/cm: Add basic performance counters Add performance/debug counters to track sent/received messages, retries, and duplicates. Counters are tracked per CM message type, per port. The counters are always enabled, so intrusive state tracking is not done. Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier --- drivers/infiniband/core/cm.c | 306 +++++++++++++++++++++++++++++++++++++++--- drivers/infiniband/core/ucm.c | 37 +++-- 2 files changed, 303 insertions(+), 40 deletions(-) diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index 2e39236d189f..c0150147d347 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2004-2006 Intel Corporation. All rights reserved. + * Copyright (c) 2004-2007 Intel Corporation. All rights reserved. * Copyright (c) 2004 Topspin Corporation. All rights reserved. * Copyright (c) 2004, 2005 Voltaire Corporation. All rights reserved. * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. @@ -37,12 +37,14 @@ #include #include +#include #include #include #include #include #include #include +#include #include #include @@ -78,17 +80,94 @@ static struct ib_cm { struct workqueue_struct *wq; } cm; +/* Counter indexes ordered by attribute ID */ +enum { + CM_REQ_COUNTER, + CM_MRA_COUNTER, + CM_REJ_COUNTER, + CM_REP_COUNTER, + CM_RTU_COUNTER, + CM_DREQ_COUNTER, + CM_DREP_COUNTER, + CM_SIDR_REQ_COUNTER, + CM_SIDR_REP_COUNTER, + CM_LAP_COUNTER, + CM_APR_COUNTER, + CM_ATTR_COUNT, + CM_ATTR_ID_OFFSET = 0x0010, +}; + +enum { + CM_XMIT, + CM_XMIT_RETRIES, + CM_RECV, + CM_RECV_DUPLICATES, + CM_COUNTER_GROUPS +}; + +static char const counter_group_names[CM_COUNTER_GROUPS] + [sizeof("cm_rx_duplicates")] = { + "cm_tx_msgs", "cm_tx_retries", + "cm_rx_msgs", "cm_rx_duplicates" +}; + +struct cm_counter_group { + struct kobject obj; + atomic_long_t counter[CM_ATTR_COUNT]; +}; + +struct cm_counter_attribute { + struct attribute attr; + int index; +}; + +#define CM_COUNTER_ATTR(_name, _index) \ +struct cm_counter_attribute cm_##_name##_counter_attr = { \ + .attr = { .name = __stringify(_name), .mode = 0444, .owner = THIS_MODULE }, \ + .index = _index \ +} + +static CM_COUNTER_ATTR(req, CM_REQ_COUNTER); +static CM_COUNTER_ATTR(mra, CM_MRA_COUNTER); +static CM_COUNTER_ATTR(rej, CM_REJ_COUNTER); +static CM_COUNTER_ATTR(rep, CM_REP_COUNTER); +static CM_COUNTER_ATTR(rtu, CM_RTU_COUNTER); +static CM_COUNTER_ATTR(dreq, CM_DREQ_COUNTER); +static CM_COUNTER_ATTR(drep, CM_DREP_COUNTER); +static CM_COUNTER_ATTR(sidr_req, CM_SIDR_REQ_COUNTER); +static CM_COUNTER_ATTR(sidr_rep, CM_SIDR_REP_COUNTER); +static CM_COUNTER_ATTR(lap, CM_LAP_COUNTER); +static CM_COUNTER_ATTR(apr, CM_APR_COUNTER); + +static struct attribute *cm_counter_default_attrs[] = { + &cm_req_counter_attr.attr, + &cm_mra_counter_attr.attr, + &cm_rej_counter_attr.attr, + &cm_rep_counter_attr.attr, + &cm_rtu_counter_attr.attr, + &cm_dreq_counter_attr.attr, + &cm_drep_counter_attr.attr, + &cm_sidr_req_counter_attr.attr, + &cm_sidr_rep_counter_attr.attr, + &cm_lap_counter_attr.attr, + &cm_apr_counter_attr.attr, + NULL +}; + struct cm_port { struct cm_device *cm_dev; struct ib_mad_agent *mad_agent; + struct kobject port_obj; u8 port_num; + struct cm_counter_group counter_group[CM_COUNTER_GROUPS]; }; struct cm_device { struct list_head list; struct ib_device *device; + struct kobject dev_obj; u8 ack_delay; - struct cm_port port[0]; + struct cm_port *port[0]; }; struct cm_av { @@ -278,7 +357,7 @@ static int cm_init_av_by_path(struct ib_sa_path_rec *path, struct cm_av *av) list_for_each_entry(cm_dev, &cm.device_list, list) { if (!ib_find_cached_gid(cm_dev->device, &path->sgid, &p, NULL)) { - port = &cm_dev->port[p-1]; + port = cm_dev->port[p-1]; break; } } @@ -1270,6 +1349,9 @@ static void cm_dup_req_handler(struct cm_work *work, struct ib_mad_send_buf *msg = NULL; int ret; + atomic_long_inc(&work->port->counter_group[CM_RECV_DUPLICATES]. + counter[CM_REQ_COUNTER]); + /* Quick state check to discard duplicate REQs. */ if (cm_id_priv->id.state == IB_CM_REQ_RCVD) return; @@ -1616,6 +1698,8 @@ static void cm_dup_rep_handler(struct cm_work *work) if (!cm_id_priv) return; + atomic_long_inc(&work->port->counter_group[CM_RECV_DUPLICATES]. + counter[CM_REP_COUNTER]); ret = cm_alloc_response_msg(work->port, work->mad_recv_wc, &msg); if (ret) goto deref; @@ -1781,6 +1865,8 @@ static int cm_rtu_handler(struct cm_work *work) if (cm_id_priv->id.state != IB_CM_REP_SENT && cm_id_priv->id.state != IB_CM_MRA_REP_RCVD) { spin_unlock_irq(&cm_id_priv->lock); + atomic_long_inc(&work->port->counter_group[CM_RECV_DUPLICATES]. + counter[CM_RTU_COUNTER]); goto out; } cm_id_priv->id.state = IB_CM_ESTABLISHED; @@ -1958,6 +2044,8 @@ static int cm_dreq_handler(struct cm_work *work) cm_id_priv = cm_acquire_id(dreq_msg->remote_comm_id, dreq_msg->local_comm_id); if (!cm_id_priv) { + atomic_long_inc(&work->port->counter_group[CM_RECV_DUPLICATES]. + counter[CM_DREQ_COUNTER]); cm_issue_drep(work->port, work->mad_recv_wc); return -EINVAL; } @@ -1977,6 +2065,8 @@ static int cm_dreq_handler(struct cm_work *work) case IB_CM_MRA_REP_RCVD: break; case IB_CM_TIMEWAIT: + atomic_long_inc(&work->port->counter_group[CM_RECV_DUPLICATES]. + counter[CM_DREQ_COUNTER]); if (cm_alloc_response_msg(work->port, work->mad_recv_wc, &msg)) goto unlock; @@ -1988,6 +2078,10 @@ static int cm_dreq_handler(struct cm_work *work) if (ib_post_send_mad(msg, NULL)) cm_free_msg(msg); goto deref; + case IB_CM_DREQ_RCVD: + atomic_long_inc(&work->port->counter_group[CM_RECV_DUPLICATES]. + counter[CM_DREQ_COUNTER]); + goto unlock; default: goto unlock; } @@ -2339,10 +2433,20 @@ static int cm_mra_handler(struct cm_work *work) if (cm_mra_get_msg_mraed(mra_msg) != CM_MSG_RESPONSE_OTHER || cm_id_priv->id.lap_state != IB_CM_LAP_SENT || ib_modify_mad(cm_id_priv->av.port->mad_agent, - cm_id_priv->msg, timeout)) + cm_id_priv->msg, timeout)) { + if (cm_id_priv->id.lap_state == IB_CM_MRA_LAP_RCVD) + atomic_long_inc(&work->port-> + counter_group[CM_RECV_DUPLICATES]. + counter[CM_MRA_COUNTER]); goto out; + } cm_id_priv->id.lap_state = IB_CM_MRA_LAP_RCVD; break; + case IB_CM_MRA_REQ_RCVD: + case IB_CM_MRA_REP_RCVD: + atomic_long_inc(&work->port->counter_group[CM_RECV_DUPLICATES]. + counter[CM_MRA_COUNTER]); + /* fall through */ default: goto out; } @@ -2502,6 +2606,8 @@ static int cm_lap_handler(struct cm_work *work) case IB_CM_LAP_IDLE: break; case IB_CM_MRA_LAP_SENT: + atomic_long_inc(&work->port->counter_group[CM_RECV_DUPLICATES]. + counter[CM_LAP_COUNTER]); if (cm_alloc_response_msg(work->port, work->mad_recv_wc, &msg)) goto unlock; @@ -2515,6 +2621,10 @@ static int cm_lap_handler(struct cm_work *work) if (ib_post_send_mad(msg, NULL)) cm_free_msg(msg); goto deref; + case IB_CM_LAP_RCVD: + atomic_long_inc(&work->port->counter_group[CM_RECV_DUPLICATES]. + counter[CM_LAP_COUNTER]); + goto unlock; default: goto unlock; } @@ -2796,6 +2906,8 @@ static int cm_sidr_req_handler(struct cm_work *work) cur_cm_id_priv = cm_insert_remote_sidr(cm_id_priv); if (cur_cm_id_priv) { spin_unlock_irq(&cm.lock); + atomic_long_inc(&work->port->counter_group[CM_RECV_DUPLICATES]. + counter[CM_SIDR_REQ_COUNTER]); goto out; /* Duplicate message. */ } cm_id_priv->id.state = IB_CM_SIDR_REQ_RCVD; @@ -2990,6 +3102,27 @@ static void cm_send_handler(struct ib_mad_agent *mad_agent, struct ib_mad_send_wc *mad_send_wc) { struct ib_mad_send_buf *msg = mad_send_wc->send_buf; + struct cm_port *port; + u16 attr_index; + + port = mad_agent->context; + attr_index = be16_to_cpu(((struct ib_mad_hdr *) + msg->mad)->attr_id) - CM_ATTR_ID_OFFSET; + + /* + * If the send was in response to a received message (context[0] is not + * set to a cm_id), and is not a REJ, then it is a send that was + * manually retried. + */ + if (!msg->context[0] && (attr_index != CM_REJ_COUNTER)) + msg->retries = 1; + + atomic_long_add(1 + msg->retries, + &port->counter_group[CM_XMIT].counter[attr_index]); + if (msg->retries) + atomic_long_add(msg->retries, + &port->counter_group[CM_XMIT_RETRIES]. + counter[attr_index]); switch (mad_send_wc->status) { case IB_WC_SUCCESS: @@ -3148,8 +3281,10 @@ EXPORT_SYMBOL(ib_cm_notify); static void cm_recv_handler(struct ib_mad_agent *mad_agent, struct ib_mad_recv_wc *mad_recv_wc) { + struct cm_port *port = mad_agent->context; struct cm_work *work; enum ib_cm_event_type event; + u16 attr_id; int paths = 0; switch (mad_recv_wc->recv_buf.mad->mad_hdr.attr_id) { @@ -3194,6 +3329,10 @@ static void cm_recv_handler(struct ib_mad_agent *mad_agent, return; } + attr_id = be16_to_cpu(mad_recv_wc->recv_buf.mad->mad_hdr.attr_id); + atomic_long_inc(&port->counter_group[CM_RECV]. + counter[attr_id - CM_ATTR_ID_OFFSET]); + work = kmalloc(sizeof *work + sizeof(struct ib_sa_path_rec) * paths, GFP_KERNEL); if (!work) { @@ -3204,7 +3343,7 @@ static void cm_recv_handler(struct ib_mad_agent *mad_agent, INIT_DELAYED_WORK(&work->work, cm_work_handler); work->cm_event.event = event; work->mad_recv_wc = mad_recv_wc; - work->port = (struct cm_port *)mad_agent->context; + work->port = port; queue_delayed_work(cm.wq, &work->work, 0); } @@ -3379,6 +3518,108 @@ static void cm_get_ack_delay(struct cm_device *cm_dev) cm_dev->ack_delay = attr.local_ca_ack_delay; } +static ssize_t cm_show_counter(struct kobject *obj, struct attribute *attr, + char *buf) +{ + struct cm_counter_group *group; + struct cm_counter_attribute *cm_attr; + + group = container_of(obj, struct cm_counter_group, obj); + cm_attr = container_of(attr, struct cm_counter_attribute, attr); + + return sprintf(buf, "%ld\n", + atomic_long_read(&group->counter[cm_attr->index])); +} + +static struct sysfs_ops cm_counter_ops = { + .show = cm_show_counter +}; + +static struct kobj_type cm_counter_obj_type = { + .sysfs_ops = &cm_counter_ops, + .default_attrs = cm_counter_default_attrs +}; + +static void cm_release_port_obj(struct kobject *obj) +{ + struct cm_port *cm_port; + + printk(KERN_ERR "free cm port\n"); + + cm_port = container_of(obj, struct cm_port, port_obj); + kfree(cm_port); +} + +static struct kobj_type cm_port_obj_type = { + .release = cm_release_port_obj +}; + +static void cm_release_dev_obj(struct kobject *obj) +{ + struct cm_device *cm_dev; + + printk(KERN_ERR "free cm dev\n"); + + cm_dev = container_of(obj, struct cm_device, dev_obj); + kfree(cm_dev); +} + +static struct kobj_type cm_dev_obj_type = { + .release = cm_release_dev_obj +}; + +struct class cm_class = { + .name = "infiniband_cm", +}; +EXPORT_SYMBOL(cm_class); + +static void cm_remove_fs_obj(struct kobject *obj) +{ + kobject_put(obj->parent); + kobject_put(obj); +} + +static int cm_create_port_fs(struct cm_port *port) +{ + int i, ret; + + ret = kobject_init_and_add(&port->port_obj, &cm_port_obj_type, + kobject_get(&port->cm_dev->dev_obj), + "%d", port->port_num); + if (ret) { + kfree(port); + return ret; + } + + for (i = 0; i < CM_COUNTER_GROUPS; i++) { + ret = kobject_init_and_add(&port->counter_group[i].obj, + &cm_counter_obj_type, + kobject_get(&port->port_obj), + "%s", counter_group_names[i]); + if (ret) + goto error; + } + + return 0; + +error: + while (i--) + cm_remove_fs_obj(&port->counter_group[i].obj); + cm_remove_fs_obj(&port->port_obj); + return ret; + +} + +static void cm_remove_port_fs(struct cm_port *port) +{ + int i; + + for (i = 0; i < CM_COUNTER_GROUPS; i++) + cm_remove_fs_obj(&port->counter_group[i].obj); + + cm_remove_fs_obj(&port->port_obj); +} + static void cm_add_one(struct ib_device *device) { struct cm_device *cm_dev; @@ -3397,7 +3638,7 @@ static void cm_add_one(struct ib_device *device) if (rdma_node_get_transport(device->node_type) != RDMA_TRANSPORT_IB) return; - cm_dev = kmalloc(sizeof(*cm_dev) + sizeof(*port) * + cm_dev = kzalloc(sizeof(*cm_dev) + sizeof(*port) * device->phys_port_cnt, GFP_KERNEL); if (!cm_dev) return; @@ -3405,11 +3646,27 @@ static void cm_add_one(struct ib_device *device) cm_dev->device = device; cm_get_ack_delay(cm_dev); + ret = kobject_init_and_add(&cm_dev->dev_obj, &cm_dev_obj_type, + &cm_class.subsys.kobj, "%s", device->name); + if (ret) { + kfree(cm_dev); + return; + } + set_bit(IB_MGMT_METHOD_SEND, reg_req.method_mask); for (i = 1; i <= device->phys_port_cnt; i++) { - port = &cm_dev->port[i-1]; + port = kzalloc(sizeof *port, GFP_KERNEL); + if (!port) + goto error1; + + cm_dev->port[i-1] = port; port->cm_dev = cm_dev; port->port_num = i; + + ret = cm_create_port_fs(port); + if (ret) + goto error1; + port->mad_agent = ib_register_mad_agent(device, i, IB_QPT_GSI, ®_req, @@ -3418,11 +3675,11 @@ static void cm_add_one(struct ib_device *device) cm_recv_handler, port); if (IS_ERR(port->mad_agent)) - goto error1; + goto error2; ret = ib_modify_port(device, i, 0, &port_modify); if (ret) - goto error2; + goto error3; } ib_set_client_data(device, &cm_client, cm_dev); @@ -3431,17 +3688,20 @@ static void cm_add_one(struct ib_device *device) write_unlock_irqrestore(&cm.device_lock, flags); return; -error2: +error3: ib_unregister_mad_agent(port->mad_agent); +error2: + cm_remove_port_fs(port); error1: port_modify.set_port_cap_mask = 0; port_modify.clr_port_cap_mask = IB_PORT_CM_SUP; while (--i) { - port = &cm_dev->port[i-1]; + port = cm_dev->port[i-1]; ib_modify_port(device, port->port_num, 0, &port_modify); ib_unregister_mad_agent(port->mad_agent); + cm_remove_port_fs(port); } - kfree(cm_dev); + cm_remove_fs_obj(&cm_dev->dev_obj); } static void cm_remove_one(struct ib_device *device) @@ -3463,11 +3723,12 @@ static void cm_remove_one(struct ib_device *device) write_unlock_irqrestore(&cm.device_lock, flags); for (i = 1; i <= device->phys_port_cnt; i++) { - port = &cm_dev->port[i-1]; + port = cm_dev->port[i-1]; ib_modify_port(device, port->port_num, 0, &port_modify); ib_unregister_mad_agent(port->mad_agent); + cm_remove_port_fs(port); } - kfree(cm_dev); + cm_remove_fs_obj(&cm_dev->dev_obj); } static int __init ib_cm_init(void) @@ -3488,17 +3749,25 @@ static int __init ib_cm_init(void) idr_pre_get(&cm.local_id_table, GFP_KERNEL); INIT_LIST_HEAD(&cm.timewait_list); - cm.wq = create_workqueue("ib_cm"); - if (!cm.wq) + ret = class_register(&cm_class); + if (ret) return -ENOMEM; + cm.wq = create_workqueue("ib_cm"); + if (!cm.wq) { + ret = -ENOMEM; + goto error1; + } + ret = ib_register_client(&cm_client); if (ret) - goto error; + goto error2; return 0; -error: +error2: destroy_workqueue(cm.wq); +error1: + class_unregister(&cm_class); return ret; } @@ -3519,6 +3788,7 @@ static void __exit ib_cm_cleanup(void) } ib_unregister_client(&cm_client); + class_unregister(&cm_class); idr_destroy(&cm.local_id_table); } diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c index 424983f5b1ee..4291ab42a5b9 100644 --- a/drivers/infiniband/core/ucm.c +++ b/drivers/infiniband/core/ucm.c @@ -106,6 +106,9 @@ enum { IB_UCM_MAX_DEVICES = 32 }; +/* ib_cm and ib_user_cm modules share /sys/class/infiniband_cm */ +extern struct class cm_class; + #define IB_UCM_BASE_DEV MKDEV(IB_UCM_MAJOR, IB_UCM_BASE_MINOR) static void ib_ucm_add_one(struct ib_device *device); @@ -1199,7 +1202,7 @@ static int ib_ucm_close(struct inode *inode, struct file *filp) return 0; } -static void ib_ucm_release_class_dev(struct class_device *class_dev) +static void ucm_release_class_dev(struct class_device *class_dev) { struct ib_ucm_device *dev; @@ -1217,11 +1220,6 @@ static const struct file_operations ucm_fops = { .poll = ib_ucm_poll, }; -static struct class ucm_class = { - .name = "infiniband_cm", - .release = ib_ucm_release_class_dev -}; - static ssize_t show_ibdev(struct class_device *class_dev, char *buf) { struct ib_ucm_device *dev; @@ -1257,9 +1255,10 @@ static void ib_ucm_add_one(struct ib_device *device) if (cdev_add(&ucm_dev->dev, IB_UCM_BASE_DEV + ucm_dev->devnum, 1)) goto err; - ucm_dev->class_dev.class = &ucm_class; + ucm_dev->class_dev.class = &cm_class; ucm_dev->class_dev.dev = device->dma_device; ucm_dev->class_dev.devt = ucm_dev->dev.dev; + ucm_dev->class_dev.release = ucm_release_class_dev; snprintf(ucm_dev->class_dev.class_id, BUS_ID_SIZE, "ucm%d", ucm_dev->devnum); if (class_device_register(&ucm_dev->class_dev)) @@ -1306,40 +1305,34 @@ static int __init ib_ucm_init(void) "infiniband_cm"); if (ret) { printk(KERN_ERR "ucm: couldn't register device number\n"); - goto err; + goto error1; } - ret = class_register(&ucm_class); - if (ret) { - printk(KERN_ERR "ucm: couldn't create class infiniband_cm\n"); - goto err_chrdev; - } - - ret = class_create_file(&ucm_class, &class_attr_abi_version); + ret = class_create_file(&cm_class, &class_attr_abi_version); if (ret) { printk(KERN_ERR "ucm: couldn't create abi_version attribute\n"); - goto err_class; + goto error2; } ret = ib_register_client(&ucm_client); if (ret) { printk(KERN_ERR "ucm: couldn't register client\n"); - goto err_class; + goto error3; } return 0; -err_class: - class_unregister(&ucm_class); -err_chrdev: +error3: + class_remove_file(&cm_class, &class_attr_abi_version); +error2: unregister_chrdev_region(IB_UCM_BASE_DEV, IB_UCM_MAX_DEVICES); -err: +error1: return ret; } static void __exit ib_ucm_cleanup(void) { ib_unregister_client(&ucm_client); - class_unregister(&ucm_class); + class_remove_file(&cm_class, &class_attr_abi_version); unregister_chrdev_region(IB_UCM_BASE_DEV, IB_UCM_MAX_DEVICES); idr_destroy(&ctx_id_table); } -- cgit v1.2.3-59-g8ed1b From b61d92d8ae6aa13b17d1c31e69d123879cec2ee2 Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Fri, 30 Nov 2007 17:30:18 -0800 Subject: IB/mad: Fix incorrect access to items on local_list In cancel_mads(), MADs are moved from the wait_list and local_list to a cancel_list for processing. However, the structures on these two lists are not the same. The wait_list references struct ib_mad_send_wr_private, but local_list references struct ib_mad_local_private. Cancel_mads() treats all items moved to the cancel_list as struct ib_mad_send_wr_private. This leads to a system crash when requests are moved from the local_list to the cancel_list. Fix this by leaving local_list alone. All requests on the local_list have completed are just awaiting processing by a queued worker thread. Bug (crash) reported by Dotan Barak . Problem with local_list access reported by Robert Reynolds . Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier --- drivers/infiniband/core/mad.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index 5eace995836d..fbe16d5250a4 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -2275,8 +2275,6 @@ static void cancel_mads(struct ib_mad_agent_private *mad_agent_priv) /* Empty wait list to prevent receives from finding a request */ list_splice_init(&mad_agent_priv->wait_list, &cancel_list); - /* Empty local completion list as well */ - list_splice_init(&mad_agent_priv->local_list, &cancel_list); spin_unlock_irqrestore(&mad_agent_priv->lock, flags); /* Report all cancelled requests */ -- cgit v1.2.3-59-g8ed1b From 45d9478da106c749203056f56e94d0e370dfac87 Mon Sep 17 00:00:00 2001 From: Vladimir Sokolovsky Date: Fri, 7 Dec 2007 20:32:03 -0800 Subject: RDMA/cma: Reenable device removal on passive side Enable conn_id remove on the passive side after connection establishment. This corrects an issue where the IB driver can't be unloaded after running applications over RDS. The 'dev_remove' counter does not reach 0 for established connections on the passive side. This problem is limited to device removal, and only occurs on the passive side if there are established connections. Signed-off-by: Vladimir Sokolovsky Reviewed-by: Sean Hefty Signed-off-by: Roland Dreier --- drivers/infiniband/core/cma.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 5a80e74731c8..312ec74f3d18 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -1122,8 +1122,10 @@ static int cma_req_handler(struct ib_cm_id *cm_id, struct ib_cm_event *ib_event) cm_id->cm_handler = cma_ib_handler; ret = conn_id->id.event_handler(&conn_id->id, &event); - if (!ret) + if (!ret) { + cma_enable_remove(conn_id); goto out; + } /* Destroy the CM ID by returning a non-zero value. */ conn_id->cm_id.ib = NULL; -- cgit v1.2.3-59-g8ed1b From 88314e4dda1e158aabce76429ef4d017b48f8b92 Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Wed, 14 Nov 2007 00:29:50 -0800 Subject: RDMA/cma: add support for rdma_migrate_id() This is based on user feedback from Doug Ledford at RedHat: Events that occur on an rdma_cm_id are reported to userspace through an event channel. Connection request events are reported on the event channel associated with the listen. When the connection is accepted, a new rdma_cm_id is created and automatically uses the listen event channel. This is suboptimal where the user only wants listen events on that channel. Additionally, it may be desirable to have events related to connection establishment use a different event channel than those related to already established connections. Allow the user to migrate an rdma_cm_id between event channels. All pending events associated with the rdma_cm_id are moved to the new event channel. Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier --- drivers/infiniband/core/ucma.c | 92 ++++++++++++++++++++++++++++++++++++++++++ include/rdma/rdma_user_cm.h | 13 +++++- 2 files changed, 104 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c index 90d675ad9ec8..15937eb38aae 100644 --- a/drivers/infiniband/core/ucma.c +++ b/drivers/infiniband/core/ucma.c @@ -31,6 +31,7 @@ */ #include +#include #include #include #include @@ -991,6 +992,96 @@ out: return ret; } +static void ucma_lock_files(struct ucma_file *file1, struct ucma_file *file2) +{ + /* Acquire mutex's based on pointer comparison to prevent deadlock. */ + if (file1 < file2) { + mutex_lock(&file1->mut); + mutex_lock(&file2->mut); + } else { + mutex_lock(&file2->mut); + mutex_lock(&file1->mut); + } +} + +static void ucma_unlock_files(struct ucma_file *file1, struct ucma_file *file2) +{ + if (file1 < file2) { + mutex_unlock(&file2->mut); + mutex_unlock(&file1->mut); + } else { + mutex_unlock(&file1->mut); + mutex_unlock(&file2->mut); + } +} + +static void ucma_move_events(struct ucma_context *ctx, struct ucma_file *file) +{ + struct ucma_event *uevent, *tmp; + + list_for_each_entry_safe(uevent, tmp, &ctx->file->event_list, list) + if (uevent->ctx == ctx) + list_move_tail(&uevent->list, &file->event_list); +} + +static ssize_t ucma_migrate_id(struct ucma_file *new_file, + const char __user *inbuf, + int in_len, int out_len) +{ + struct rdma_ucm_migrate_id cmd; + struct rdma_ucm_migrate_resp resp; + struct ucma_context *ctx; + struct file *filp; + struct ucma_file *cur_file; + int ret = 0; + + if (copy_from_user(&cmd, inbuf, sizeof(cmd))) + return -EFAULT; + + /* Get current fd to protect against it being closed */ + filp = fget(cmd.fd); + if (!filp) + return -ENOENT; + + /* Validate current fd and prevent destruction of id. */ + ctx = ucma_get_ctx(filp->private_data, cmd.id); + if (IS_ERR(ctx)) { + ret = PTR_ERR(ctx); + goto file_put; + } + + cur_file = ctx->file; + if (cur_file == new_file) { + resp.events_reported = ctx->events_reported; + goto response; + } + + /* + * Migrate events between fd's, maintaining order, and avoiding new + * events being added before existing events. + */ + ucma_lock_files(cur_file, new_file); + mutex_lock(&mut); + + list_move_tail(&ctx->list, &new_file->ctx_list); + ucma_move_events(ctx, new_file); + ctx->file = new_file; + resp.events_reported = ctx->events_reported; + + mutex_unlock(&mut); + ucma_unlock_files(cur_file, new_file); + +response: + if (copy_to_user((void __user *)(unsigned long)cmd.response, + &resp, sizeof(resp))) + ret = -EFAULT; + + ucma_put_ctx(ctx); +file_put: + fput(filp); + return ret; +} + static ssize_t (*ucma_cmd_table[])(struct ucma_file *file, const char __user *inbuf, int in_len, int out_len) = { @@ -1012,6 +1103,7 @@ static ssize_t (*ucma_cmd_table[])(struct ucma_file *file, [RDMA_USER_CM_CMD_NOTIFY] = ucma_notify, [RDMA_USER_CM_CMD_JOIN_MCAST] = ucma_join_multicast, [RDMA_USER_CM_CMD_LEAVE_MCAST] = ucma_leave_multicast, + [RDMA_USER_CM_CMD_MIGRATE_ID] = ucma_migrate_id }; static ssize_t ucma_write(struct file *filp, const char __user *buf, diff --git a/include/rdma/rdma_user_cm.h b/include/rdma/rdma_user_cm.h index 9749c1b34d00..c55705460b87 100644 --- a/include/rdma/rdma_user_cm.h +++ b/include/rdma/rdma_user_cm.h @@ -60,7 +60,8 @@ enum { RDMA_USER_CM_CMD_SET_OPTION, RDMA_USER_CM_CMD_NOTIFY, RDMA_USER_CM_CMD_JOIN_MCAST, - RDMA_USER_CM_CMD_LEAVE_MCAST + RDMA_USER_CM_CMD_LEAVE_MCAST, + RDMA_USER_CM_CMD_MIGRATE_ID }; /* @@ -230,4 +231,14 @@ struct rdma_ucm_set_option { __u32 optlen; }; +struct rdma_ucm_migrate_id { + __u64 response; + __u32 id; + __u32 fd; +}; + +struct rdma_ucm_migrate_resp { + __u32 events_reported; +}; + #endif /* RDMA_USER_CM_H */ -- cgit v1.2.3-59-g8ed1b From bd5d7a8585bb196a03655b25d2ec6395a491cd01 Mon Sep 17 00:00:00 2001 From: Erez Zilber Date: Fri, 25 Jan 2008 14:15:32 -0800 Subject: IB/iser: update URLs of iSER docs Signed-off-by: Erez Zilber --- drivers/infiniband/ulp/iser/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/ulp/iser/Kconfig b/drivers/infiniband/ulp/iser/Kconfig index fe604c8d2996..77dedba829e6 100644 --- a/drivers/infiniband/ulp/iser/Kconfig +++ b/drivers/infiniband/ulp/iser/Kconfig @@ -8,5 +8,5 @@ config INFINIBAND_ISER that speak iSCSI over iSER over InfiniBand. The iSER protocol is defined by IETF. - See - and + See + and -- cgit v1.2.3-59-g8ed1b From 38dc732f47948b9f91ae846806159a16aab1015f Mon Sep 17 00:00:00 2001 From: Oliver Pinter Date: Fri, 25 Jan 2008 14:15:32 -0800 Subject: IB/iser: Typo fix (s/destory/destroy/) Signed-off-by: Oliver Pinter Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/iser/iser_verbs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/ulp/iser/iser_verbs.c b/drivers/infiniband/ulp/iser/iser_verbs.c index 654a4dce0236..91b2b39eb20c 100644 --- a/drivers/infiniband/ulp/iser/iser_verbs.c +++ b/drivers/infiniband/ulp/iser/iser_verbs.c @@ -105,7 +105,7 @@ pd_err: } /** - * iser_free_device_ib_res - destory/dealloc/dereg the DMA MR, + * iser_free_device_ib_res - destroy/dealloc/dereg the DMA MR, * CQ and PD created with the device associated with the adapator. */ static void iser_free_device_ib_res(struct iser_device *device) -- cgit v1.2.3-59-g8ed1b From e57895d38991036f9ccf193b70fc5ebd5f6e6dc9 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 1 Jan 2008 15:47:10 +0200 Subject: IB/mthca: Remove MSI support as scheduled Remove MSI support from the mthca driver, as scheduled. There is no reason to use MSI instead of MSI-X, since MSI-X performs better. No one has spoken up since MSI support was deprecated in commit f6be6fbe ("IB/mthca: Schedule MSI support for removal"), so apparently the MSI support is unused. Signed-off-by: Adrian Bunk Signed-off-by: Roland Dreier --- Documentation/feature-removal-schedule.txt | 10 -------- drivers/infiniband/hw/mthca/mthca_dev.h | 13 +++++----- drivers/infiniband/hw/mthca/mthca_eq.c | 6 ++--- drivers/infiniband/hw/mthca/mthca_main.c | 38 ++++-------------------------- 4 files changed, 13 insertions(+), 54 deletions(-) diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 20c4c8bac9d7..9b8291f4c211 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -295,16 +295,6 @@ Who: linuxppc-dev@ozlabs.org --------------------------- -What: mthca driver's MSI support -When: January 2008 -Files: drivers/infiniband/hw/mthca/*.[ch] -Why: All mthca hardware also supports MSI-X, which provides - strictly more functionality than MSI. So there is no point in - having both MSI-X and MSI support in the driver. -Who: Roland Dreier - ---------------------------- - What: sk98lin network driver When: Feburary 2008 Why: In kernel tree version of driver is unmaintained. Sk98lin driver diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h index 15aa32eb78b6..7bbdd1f4e6c7 100644 --- a/drivers/infiniband/hw/mthca/mthca_dev.h +++ b/drivers/infiniband/hw/mthca/mthca_dev.h @@ -60,13 +60,12 @@ enum { MTHCA_FLAG_DDR_HIDDEN = 1 << 1, MTHCA_FLAG_SRQ = 1 << 2, - MTHCA_FLAG_MSI = 1 << 3, - MTHCA_FLAG_MSI_X = 1 << 4, - MTHCA_FLAG_NO_LAM = 1 << 5, - MTHCA_FLAG_FMR = 1 << 6, - MTHCA_FLAG_MEMFREE = 1 << 7, - MTHCA_FLAG_PCIE = 1 << 8, - MTHCA_FLAG_SINAI_OPT = 1 << 9 + MTHCA_FLAG_MSI_X = 1 << 3, + MTHCA_FLAG_NO_LAM = 1 << 4, + MTHCA_FLAG_FMR = 1 << 5, + MTHCA_FLAG_MEMFREE = 1 << 6, + MTHCA_FLAG_PCIE = 1 << 7, + MTHCA_FLAG_SINAI_OPT = 1 << 8 }; enum { diff --git a/drivers/infiniband/hw/mthca/mthca_eq.c b/drivers/infiniband/hw/mthca/mthca_eq.c index b29de51b7f35..b60eb5df96e8 100644 --- a/drivers/infiniband/hw/mthca/mthca_eq.c +++ b/drivers/infiniband/hw/mthca/mthca_eq.c @@ -827,8 +827,7 @@ int mthca_init_eq_table(struct mthca_dev *dev) if (err) goto err_out_free; - if (dev->mthca_flags & MTHCA_FLAG_MSI || - dev->mthca_flags & MTHCA_FLAG_MSI_X) { + if (dev->mthca_flags & MTHCA_FLAG_MSI_X) { dev->eq_table.clr_mask = 0; } else { dev->eq_table.clr_mask = @@ -839,8 +838,7 @@ int mthca_init_eq_table(struct mthca_dev *dev) dev->eq_table.arm_mask = 0; - intr = (dev->mthca_flags & MTHCA_FLAG_MSI) ? - 128 : dev->eq_table.inta_pin; + intr = dev->eq_table.inta_pin; err = mthca_create_eq(dev, dev->limits.num_cqs + MTHCA_NUM_SPARE_EQE, (dev->mthca_flags & MTHCA_FLAG_MSI_X) ? 128 : intr, diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index 60de6f93869e..2fc36ca134a6 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -65,14 +65,9 @@ static int msi_x = 1; module_param(msi_x, int, 0444); MODULE_PARM_DESC(msi_x, "attempt to use MSI-X if nonzero"); -static int msi = 0; -module_param(msi, int, 0444); -MODULE_PARM_DESC(msi, "attempt to use MSI if nonzero (deprecated, use MSI-X instead)"); - #else /* CONFIG_PCI_MSI */ #define msi_x (0) -#define msi (0) #endif /* CONFIG_PCI_MSI */ @@ -816,13 +811,11 @@ static int mthca_setup_hca(struct mthca_dev *dev) err = mthca_NOP(dev, &status); if (err || status) { - if (dev->mthca_flags & (MTHCA_FLAG_MSI | MTHCA_FLAG_MSI_X)) { + if (dev->mthca_flags & MTHCA_FLAG_MSI_X) { mthca_warn(dev, "NOP command failed to generate interrupt " "(IRQ %d).\n", - dev->mthca_flags & MTHCA_FLAG_MSI_X ? - dev->eq_table.eq[MTHCA_EQ_CMD].msi_x_vector : - dev->pdev->irq); - mthca_warn(dev, "Trying again with MSI/MSI-X disabled.\n"); + dev->eq_table.eq[MTHCA_EQ_CMD].msi_x_vector); + mthca_warn(dev, "Trying again with MSI-X disabled.\n"); } else { mthca_err(dev, "NOP command failed to generate interrupt " "(IRQ %d), aborting.\n", @@ -1128,29 +1121,12 @@ static int __mthca_init_one(struct pci_dev *pdev, int hca_type) if (msi_x && !mthca_enable_msi_x(mdev)) mdev->mthca_flags |= MTHCA_FLAG_MSI_X; - else if (msi) { - static int warned; - - if (!warned) { - printk(KERN_WARNING PFX "WARNING: MSI support will be " - "removed from the ib_mthca driver in January 2008.\n"); - printk(KERN_WARNING " If you are using MSI and cannot " - "switch to MSI-X, please tell " - ".\n"); - ++warned; - } - - if (!pci_enable_msi(pdev)) - mdev->mthca_flags |= MTHCA_FLAG_MSI; - } err = mthca_setup_hca(mdev); - if (err == -EBUSY && (mdev->mthca_flags & (MTHCA_FLAG_MSI | MTHCA_FLAG_MSI_X))) { + if (err == -EBUSY && (mdev->mthca_flags & MTHCA_FLAG_MSI_X)) { if (mdev->mthca_flags & MTHCA_FLAG_MSI_X) pci_disable_msix(pdev); - if (mdev->mthca_flags & MTHCA_FLAG_MSI) - pci_disable_msi(pdev); - mdev->mthca_flags &= ~(MTHCA_FLAG_MSI_X | MTHCA_FLAG_MSI); + mdev->mthca_flags &= ~MTHCA_FLAG_MSI_X; err = mthca_setup_hca(mdev); } @@ -1192,8 +1168,6 @@ err_cleanup: err_close: if (mdev->mthca_flags & MTHCA_FLAG_MSI_X) pci_disable_msix(pdev); - if (mdev->mthca_flags & MTHCA_FLAG_MSI) - pci_disable_msi(pdev); mthca_close_hca(mdev); @@ -1246,8 +1220,6 @@ static void __mthca_remove_one(struct pci_dev *pdev) if (mdev->mthca_flags & MTHCA_FLAG_MSI_X) pci_disable_msix(pdev); - if (mdev->mthca_flags & MTHCA_FLAG_MSI) - pci_disable_msi(pdev); ib_dealloc_device(&mdev->ib_dev); mthca_release_regions(pdev, mdev->mthca_flags & -- cgit v1.2.3-59-g8ed1b From b3226184af6c13c9d5d38f13f0ef8e03f718bbf7 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 25 Jan 2008 14:15:34 -0800 Subject: IB/mlx4: Micro-optimize mlx4_ib_poll_one() Rather than byte-swapping cqe->g_mlpath_rqpn each time we extract a field from it, byte-swap it once into a temporary variable. This results in smaller, better code -- eg, on 32-bit x86: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-5 (-5) function old new delta mlx4_ib_poll_cq 1188 1183 -5 Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/cq.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c index 9d32c49cc651..7950aa6e8184 100644 --- a/drivers/infiniband/hw/mlx4/cq.c +++ b/drivers/infiniband/hw/mlx4/cq.c @@ -313,6 +313,7 @@ static int mlx4_ib_poll_one(struct mlx4_ib_cq *cq, struct mlx4_ib_srq *srq; int is_send; int is_error; + u32 g_mlpath_rqpn; u16 wqe_ctr; cqe = next_cqe_sw(cq); @@ -426,10 +427,10 @@ static int mlx4_ib_poll_one(struct mlx4_ib_cq *cq, wc->slid = be16_to_cpu(cqe->rlid); wc->sl = cqe->sl >> 4; - wc->src_qp = be32_to_cpu(cqe->g_mlpath_rqpn) & 0xffffff; - wc->dlid_path_bits = (be32_to_cpu(cqe->g_mlpath_rqpn) >> 24) & 0x7f; - wc->wc_flags |= be32_to_cpu(cqe->g_mlpath_rqpn) & 0x80000000 ? - IB_WC_GRH : 0; + g_mlpath_rqpn = be32_to_cpu(cqe->g_mlpath_rqpn); + wc->src_qp = g_mlpath_rqpn & 0xffffff; + wc->dlid_path_bits = (g_mlpath_rqpn >> 24) & 0x7f; + wc->wc_flags |= g_mlpath_rqpn & 0x80000000 ? IB_WC_GRH : 0; wc->pkey_index = be32_to_cpu(cqe->immed_rss_invalid) & 0x7f; } -- cgit v1.2.3-59-g8ed1b From e57d62a14775c9d37195debe837431c75168ef69 Mon Sep 17 00:00:00 2001 From: Hoang-Nam Nguyen Date: Thu, 20 Dec 2007 15:06:33 +0100 Subject: IB/ehca: Forward event client-reregister-required to registered clients This patch allows ehca to forward event client-reregister-required to registered clients. One such event is generated by a switch eg. after its reboot. Signed-off-by: Hoang-Nam Nguyen Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ehca/ehca_irq.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/infiniband/hw/ehca/ehca_irq.c b/drivers/infiniband/hw/ehca/ehca_irq.c index 3f617b27b954..4c734ecef11d 100644 --- a/drivers/infiniband/hw/ehca/ehca_irq.c +++ b/drivers/infiniband/hw/ehca/ehca_irq.c @@ -62,6 +62,7 @@ #define NEQE_PORT_NUMBER EHCA_BMASK_IBM( 8, 15) #define NEQE_PORT_AVAILABILITY EHCA_BMASK_IBM(16, 16) #define NEQE_DISRUPTIVE EHCA_BMASK_IBM(16, 16) +#define NEQE_SPECIFIC_EVENT EHCA_BMASK_IBM(16, 23) #define ERROR_DATA_LENGTH EHCA_BMASK_IBM(52, 63) #define ERROR_DATA_TYPE EHCA_BMASK_IBM( 0, 7) @@ -354,6 +355,7 @@ static void parse_ec(struct ehca_shca *shca, u64 eqe) { u8 ec = EHCA_BMASK_GET(NEQE_EVENT_CODE, eqe); u8 port = EHCA_BMASK_GET(NEQE_PORT_NUMBER, eqe); + u8 spec_event; switch (ec) { case 0x30: /* port availability change */ @@ -394,6 +396,16 @@ static void parse_ec(struct ehca_shca *shca, u64 eqe) case 0x33: /* trace stopped */ ehca_err(&shca->ib_device, "Traced stopped."); break; + case 0x34: /* util async event */ + spec_event = EHCA_BMASK_GET(NEQE_SPECIFIC_EVENT, eqe); + if (spec_event == 0x80) /* client reregister required */ + dispatch_port_event(shca, port, + IB_EVENT_CLIENT_REREGISTER, + "client reregister req."); + else + ehca_warn(&shca->ib_device, "Unknown util async " + "event %x on port %x", spec_event, port); + break; default: ehca_err(&shca->ib_device, "Unknown event code: %x on %s.", ec, shca->ib_device.name); -- cgit v1.2.3-59-g8ed1b From cc65edcf0c174eff4367cfbc594a2f33c0d477fa Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Fri, 14 Dec 2007 19:22:34 -0800 Subject: IB/ipath: Fix RNR NAK handling This patch fixes a couple of minor problems with RNR NAK handling: - The insertion sort was causing extra delay when inserting ahead vs. behind an existing entry on the list. - A resend of a first packet of a message which is still not ready, needs another RNR NAK (i.e., it was suppressed when it shouldn't). - Also, the resend tasklet doesn't need to be woken up unless the ACK/NAK actually indicates progress has been made. Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_rc.c | 18 +++++++----------- drivers/infiniband/hw/ipath/ipath_ruc.c | 6 +++++- 2 files changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_rc.c b/drivers/infiniband/hw/ipath/ipath_rc.c index 120a61b03bc4..459e46e2c016 100644 --- a/drivers/infiniband/hw/ipath/ipath_rc.c +++ b/drivers/infiniband/hw/ipath/ipath_rc.c @@ -647,6 +647,7 @@ static void send_rc_ack(struct ipath_qp *qp) queue_ack: spin_lock_irqsave(&qp->s_lock, flags); + dev->n_rc_qacks++; qp->s_flags |= IPATH_S_ACK_PENDING; qp->s_nak_state = qp->r_nak_state; qp->s_ack_psn = qp->r_ack_psn; @@ -798,11 +799,13 @@ bail: static inline void update_last_psn(struct ipath_qp *qp, u32 psn) { - if (qp->s_wait_credit) { - qp->s_wait_credit = 0; - tasklet_hi_schedule(&qp->s_task); + if (qp->s_last_psn != psn) { + qp->s_last_psn = psn; + if (qp->s_wait_credit) { + qp->s_wait_credit = 0; + tasklet_hi_schedule(&qp->s_task); + } } - qp->s_last_psn = psn; } /** @@ -1653,13 +1656,6 @@ void ipath_rc_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr, case OP(SEND_FIRST): if (!ipath_get_rwqe(qp, 0)) { rnr_nak: - /* - * A RNR NAK will ACK earlier sends and RDMA writes. - * Don't queue the NAK if a RDMA read or atomic - * is pending though. - */ - if (qp->r_nak_state) - goto done; qp->r_nak_state = IB_RNR_NAK | qp->r_min_rnr_timer; qp->r_ack_psn = qp->r_psn; goto send_ack; diff --git a/drivers/infiniband/hw/ipath/ipath_ruc.c b/drivers/infiniband/hw/ipath/ipath_ruc.c index 1b4f7e113b21..a59bdbd0ed87 100644 --- a/drivers/infiniband/hw/ipath/ipath_ruc.c +++ b/drivers/infiniband/hw/ipath/ipath_ruc.c @@ -98,11 +98,15 @@ void ipath_insert_rnr_queue(struct ipath_qp *qp) while (qp->s_rnr_timeout >= nqp->s_rnr_timeout) { qp->s_rnr_timeout -= nqp->s_rnr_timeout; l = l->next; - if (l->next == &dev->rnrwait) + if (l->next == &dev->rnrwait) { + nqp = NULL; break; + } nqp = list_entry(l->next, struct ipath_qp, timerwait); } + if (nqp) + nqp->s_rnr_timeout -= qp->s_rnr_timeout; list_add(&qp->timerwait, l); } spin_unlock_irqrestore(&dev->pending_lock, flags); -- cgit v1.2.3-59-g8ed1b From d65708f3a766116662ff9bac81088d52a49901f4 Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Fri, 21 Dec 2007 16:47:04 -0800 Subject: IB/ipath: Cleanup ipath_get_egrbuf() Remove an unused parameter and fix up the comment. Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_driver.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c index 6a48442a8d59..5a5fbdf66ac2 100644 --- a/drivers/infiniband/hw/ipath/ipath_driver.c +++ b/drivers/infiniband/hw/ipath/ipath_driver.c @@ -1009,12 +1009,10 @@ static void get_rhf_errstring(u32 err, char *msg, size_t len) * ipath_get_egrbuf - get an eager buffer * @dd: the infinipath device * @bufnum: the eager buffer to get - * @err: unused * * must only be called if ipath_pd[port] is known to be allocated */ -static inline void *ipath_get_egrbuf(struct ipath_devdata *dd, u32 bufnum, - int err) +static inline void *ipath_get_egrbuf(struct ipath_devdata *dd, u32 bufnum) { return dd->ipath_port0_skbinfo ? (void *) dd->ipath_port0_skbinfo[bufnum].skb->data : NULL; @@ -1162,7 +1160,7 @@ reloop: etail = ipath_hdrget_index((__le32 *) rc); if (tlen > sizeof(*hdr) || etype == RCVHQ_RCV_TYPE_NON_KD) - ebuf = ipath_get_egrbuf(dd, etail, 0); + ebuf = ipath_get_egrbuf(dd, etail); } /* -- cgit v1.2.3-59-g8ed1b From c59a80aca0bfc491d90534ed5606d5493eca24a3 Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Thu, 20 Dec 2007 02:43:23 -0800 Subject: IB/ipath: kreceive uses portdata rather than devdata kreceive is now portdata * instead of devdata * and other kreceive related cleanups.... Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_driver.c | 18 ++++++++++-------- drivers/infiniband/hw/ipath/ipath_file_ops.c | 11 ++++++++--- drivers/infiniband/hw/ipath/ipath_init_chip.c | 7 +++---- drivers/infiniband/hw/ipath/ipath_intr.c | 8 +++++--- drivers/infiniband/hw/ipath/ipath_kernel.h | 17 ++++++++++++++--- drivers/infiniband/hw/ipath/ipath_stats.c | 11 ++++++----- 6 files changed, 46 insertions(+), 26 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c index 5a5fbdf66ac2..7c69090f6bd6 100644 --- a/drivers/infiniband/hw/ipath/ipath_driver.c +++ b/drivers/infiniband/hw/ipath/ipath_driver.c @@ -1104,13 +1104,14 @@ static void ipath_rcv_hdrerr(struct ipath_devdata *dd, /* * ipath_kreceive - receive a packet - * @dd: the infinipath device + * @pd: the infinipath port * * called from interrupt handler for errors or receive interrupt */ -void ipath_kreceive(struct ipath_devdata *dd) +void ipath_kreceive(struct ipath_portdata *pd) { u64 *rc; + struct ipath_devdata *dd = pd->port_dd; void *ebuf; const u32 rsize = dd->ipath_rcvhdrentsize; /* words */ const u32 maxcnt = dd->ipath_rcvhdrcnt * rsize; /* words */ @@ -1125,8 +1126,8 @@ void ipath_kreceive(struct ipath_devdata *dd) goto bail; } - l = dd->ipath_port0head; - hdrqtail = (u32) le64_to_cpu(*dd->ipath_hdrqtailptr); + l = pd->port_head; + hdrqtail = ipath_get_rcvhdrtail(pd); if (l == hdrqtail) goto bail; @@ -1135,7 +1136,7 @@ reloop: u32 qp; u8 *bthbytes; - rc = (u64 *) (dd->ipath_pd[0]->port_rcvhdrq + (l << 2)); + rc = (u64 *) (pd->port_rcvhdrq + (l << 2)); hdr = (struct ipath_message_header *)&rc[1]; /* * could make a network order version of IPATH_KD_QP, and @@ -1245,7 +1246,7 @@ reloop: * earlier packets, we "almost" guarantee we have covered * that case. */ - u32 hqtail = (u32)le64_to_cpu(*dd->ipath_hdrqtailptr); + u32 hqtail = ipath_get_rcvhdrtail(pd); if (hqtail != hdrqtail) { hdrqtail = hqtail; reloop = 1; /* loop 1 extra time at most */ @@ -1255,7 +1256,7 @@ reloop: pkttot += i; - dd->ipath_port0head = l; + pd->port_head = l; if (pkttot > ipath_stats.sps_maxpkts_call) ipath_stats.sps_maxpkts_call = pkttot; @@ -1605,7 +1606,8 @@ int ipath_create_rcvhdrq(struct ipath_devdata *dd, /* clear for security and sanity on each use */ memset(pd->port_rcvhdrq, 0, pd->port_rcvhdrq_size); - memset(pd->port_rcvhdrtail_kvaddr, 0, PAGE_SIZE); + if (pd->port_rcvhdrtail_kvaddr) + memset(pd->port_rcvhdrtail_kvaddr, 0, PAGE_SIZE); /* * tell chip each time we init it, even if we are re-using previous diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c index e7fbb31a48a0..4277014d6f8e 100644 --- a/drivers/infiniband/hw/ipath/ipath_file_ops.c +++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c @@ -742,7 +742,8 @@ static int ipath_manage_rcvq(struct ipath_portdata *pd, unsigned subport, * updated and correct itself, even in the face of software * bugs. */ - *(volatile u64 *)pd->port_rcvhdrtail_kvaddr = 0; + if (pd->port_rcvhdrtail_kvaddr) + ipath_clear_rcvhdrtail(pd); set_bit(INFINIPATH_R_PORTENABLE_SHIFT + pd->port_port, &dd->ipath_rcvctrl); } else @@ -1391,7 +1392,10 @@ static unsigned int ipath_poll_next(struct ipath_portdata *pd, pollflag = ipath_poll_hdrqfull(pd); head = ipath_read_ureg32(dd, ur_rcvhdrhead, pd->port_port); - tail = *(volatile u64 *)pd->port_rcvhdrtail_kvaddr; + if (pd->port_rcvhdrtail_kvaddr) + tail = ipath_get_rcvhdrtail(pd); + else + tail = ipath_read_ureg32(dd, ur_rcvhdrtail, pd->port_port); if (head != tail) pollflag |= POLLIN | POLLRDNORM; @@ -1932,7 +1936,8 @@ static int ipath_do_user_init(struct file *fp, * We explictly set the in-memory copy to 0 beforehand, so we don't * have to wait to be sure the DMA update has happened. */ - *(volatile u64 *)pd->port_rcvhdrtail_kvaddr = 0ULL; + if (pd->port_rcvhdrtail_kvaddr) + ipath_clear_rcvhdrtail(pd); set_bit(INFINIPATH_R_PORTENABLE_SHIFT + pd->port_port, &dd->ipath_rcvctrl); ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl, diff --git a/drivers/infiniband/hw/ipath/ipath_init_chip.c b/drivers/infiniband/hw/ipath/ipath_init_chip.c index 1c65ab907a33..e161cad21a19 100644 --- a/drivers/infiniband/hw/ipath/ipath_init_chip.c +++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c @@ -526,12 +526,11 @@ static void enable_chip(struct ipath_devdata *dd, */ val = ipath_read_ureg32(dd, ur_rcvegrindextail, 0); (void)ipath_write_ureg(dd, ur_rcvegrindexhead, val, 0); - dd->ipath_port0head = ipath_read_ureg32(dd, ur_rcvhdrtail, 0); /* Initialize so we interrupt on next packet received */ (void)ipath_write_ureg(dd, ur_rcvhdrhead, dd->ipath_rhdrhead_intr_off | - dd->ipath_port0head, 0); + dd->ipath_pd[0]->port_head, 0); /* * by now pioavail updates to memory should have occurred, so @@ -693,7 +692,7 @@ done: */ int ipath_init_chip(struct ipath_devdata *dd, int reinit) { - int ret = 0, i; + int ret = 0; u32 val32, kpiobufs; u32 piobufs, uports; u64 val; @@ -750,7 +749,7 @@ int ipath_init_chip(struct ipath_devdata *dd, int reinit) kpiobufs = ipath_kpiobufs; if (kpiobufs + (uports * IPATH_MIN_USER_PORT_BUFCNT) > piobufs) { - i = (int) piobufs - + int i = (int) piobufs - (int) (uports * IPATH_MIN_USER_PORT_BUFCNT); if (i < 0) i = 0; diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c index 4795cb895f85..ec18b9b1bb08 100644 --- a/drivers/infiniband/hw/ipath/ipath_intr.c +++ b/drivers/infiniband/hw/ipath/ipath_intr.c @@ -683,7 +683,7 @@ static int handle_errors(struct ipath_devdata *dd, ipath_err_t errs) for (i = 0; i < dd->ipath_cfgports; i++) { struct ipath_portdata *pd = dd->ipath_pd[i]; if (i == 0) { - hd = dd->ipath_port0head; + hd = pd->port_head; tl = (u32) le64_to_cpu( *dd->ipath_hdrqtailptr); } else if (pd && pd->port_cnt && @@ -712,6 +712,8 @@ static int handle_errors(struct ipath_devdata *dd, ipath_err_t errs) } } if (errs & INFINIPATH_E_RRCVEGRFULL) { + struct ipath_portdata *pd = dd->ipath_pd[0]; + /* * since this is of less importance and not likely to * happen without also getting hdrfull, only count @@ -719,7 +721,7 @@ static int handle_errors(struct ipath_devdata *dd, ipath_err_t errs) * vs user) */ ipath_stats.sps_etidfull++; - if (dd->ipath_port0head != + if (pd->port_head != (u32) le64_to_cpu(*dd->ipath_hdrqtailptr)) chkerrpkts = 1; } @@ -1173,7 +1175,7 @@ irqreturn_t ipath_intr(int irq, void *data) * for receive are at the bottom. */ if (chk0rcv) { - ipath_kreceive(dd); + ipath_kreceive(dd->ipath_pd[0]); istat &= ~port0rbits; } diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h index 81759c2031f9..72252349eaa9 100644 --- a/drivers/infiniband/hw/ipath/ipath_kernel.h +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -167,6 +167,8 @@ struct ipath_portdata { u32 active_slaves; /* Type of packets or conditions we want to poll for */ u16 poll_type; + /* port rcvhdrq head offset */ + u32 port_head; }; struct sk_buff; @@ -314,8 +316,6 @@ struct ipath_devdata { * supports, less gives more pio bufs/port, etc. */ u32 ipath_cfgports; - /* port0 rcvhdrq head offset */ - u32 ipath_port0head; /* count of port 0 hdrqfull errors */ u32 ipath_p0_hdrqfull; @@ -690,7 +690,7 @@ void ipath_free_pddata(struct ipath_devdata *, struct ipath_portdata *); int ipath_parse_ushort(const char *str, unsigned short *valp); -void ipath_kreceive(struct ipath_devdata *); +void ipath_kreceive(struct ipath_portdata *); int ipath_setrcvhdrsize(struct ipath_devdata *, unsigned); int ipath_reset_device(int); void ipath_get_faststats(unsigned long); @@ -928,6 +928,17 @@ static inline u32 ipath_read_creg32(const struct ipath_devdata *dd, (char __iomem *)dd->ipath_kregbase)); } +static inline void ipath_clear_rcvhdrtail(const struct ipath_portdata *pd) +{ + *((u64 *) pd->port_rcvhdrtail_kvaddr) = 0ULL; +} + +static inline u32 ipath_get_rcvhdrtail(const struct ipath_portdata *pd) +{ + return (u32) le64_to_cpu(*((volatile __le64 *) + pd->port_rcvhdrtail_kvaddr)); +} + /* * sysfs interface. */ diff --git a/drivers/infiniband/hw/ipath/ipath_stats.c b/drivers/infiniband/hw/ipath/ipath_stats.c index f0271415cd5b..fd897652da6a 100644 --- a/drivers/infiniband/hw/ipath/ipath_stats.c +++ b/drivers/infiniband/hw/ipath/ipath_stats.c @@ -133,15 +133,16 @@ bail: static void ipath_qcheck(struct ipath_devdata *dd) { static u64 last_tot_hdrqfull; + struct ipath_portdata *pd = dd->ipath_pd[0]; size_t blen = 0; char buf[128]; *buf = 0; - if (dd->ipath_pd[0]->port_hdrqfull != dd->ipath_p0_hdrqfull) { + if (pd->port_hdrqfull != dd->ipath_p0_hdrqfull) { blen = snprintf(buf, sizeof buf, "port 0 hdrqfull %u", - dd->ipath_pd[0]->port_hdrqfull - + pd->port_hdrqfull - dd->ipath_p0_hdrqfull); - dd->ipath_p0_hdrqfull = dd->ipath_pd[0]->port_hdrqfull; + dd->ipath_p0_hdrqfull = pd->port_hdrqfull; } if (ipath_stats.sps_etidfull != dd->ipath_last_tidfull) { blen += snprintf(buf + blen, sizeof buf - blen, @@ -173,7 +174,7 @@ static void ipath_qcheck(struct ipath_devdata *dd) if (blen) ipath_dbg("%s\n", buf); - if (dd->ipath_port0head != (u32) + if (pd->port_head != (u32) le64_to_cpu(*dd->ipath_hdrqtailptr)) { if (dd->ipath_lastport0rcv_cnt == ipath_stats.sps_port0pkts) { @@ -181,7 +182,7 @@ static void ipath_qcheck(struct ipath_devdata *dd) "port0 hd=%llx tl=%x; port0pkts %llx\n", (unsigned long long) le64_to_cpu(*dd->ipath_hdrqtailptr), - dd->ipath_port0head, + pd->port_head, (unsigned long long) ipath_stats.sps_port0pkts); } -- cgit v1.2.3-59-g8ed1b From d8274869d742c3d8082e1428de47e54d12104928 Mon Sep 17 00:00:00 2001 From: Dave Olson Date: Fri, 21 Dec 2007 01:50:59 -0800 Subject: IB/ipath: Generalize some xxx_SHIFT macros In preparation for upcoming chips that have different values for INFINIPATH_R_PORTENABLE_SHIFT, INFINIPATH_R_INTRAVAIL_SHIFT, INFINIPATH_R_TAILUPD_SHIFT, and portcfg_shift, remove the shared #defines and use device-specific variables instead. Signed-off-by: Dave Olson Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_file_ops.c | 15 ++++++++------- drivers/infiniband/hw/ipath/ipath_iba6110.c | 12 ++++++++++++ drivers/infiniband/hw/ipath/ipath_iba6120.c | 9 +++++++++ drivers/infiniband/hw/ipath/ipath_init_chip.c | 6 +++--- drivers/infiniband/hw/ipath/ipath_intr.c | 2 +- drivers/infiniband/hw/ipath/ipath_kernel.h | 6 ++++++ drivers/infiniband/hw/ipath/ipath_registers.h | 3 +-- 7 files changed, 40 insertions(+), 13 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c index 4277014d6f8e..65da7a9808ec 100644 --- a/drivers/infiniband/hw/ipath/ipath_file_ops.c +++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c @@ -744,10 +744,10 @@ static int ipath_manage_rcvq(struct ipath_portdata *pd, unsigned subport, */ if (pd->port_rcvhdrtail_kvaddr) ipath_clear_rcvhdrtail(pd); - set_bit(INFINIPATH_R_PORTENABLE_SHIFT + pd->port_port, + set_bit(dd->ipath_r_portenable_shift + pd->port_port, &dd->ipath_rcvctrl); } else - clear_bit(INFINIPATH_R_PORTENABLE_SHIFT + pd->port_port, + clear_bit(dd->ipath_r_portenable_shift + pd->port_port, &dd->ipath_rcvctrl); ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl, dd->ipath_rcvctrl); @@ -1405,7 +1405,7 @@ static unsigned int ipath_poll_next(struct ipath_portdata *pd, /* flush waiting flag so we don't miss an event */ wmb(); - set_bit(pd->port_port + INFINIPATH_R_INTRAVAIL_SHIFT, + set_bit(pd->port_port + dd->ipath_r_intravail_shift, &dd->ipath_rcvctrl); ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl, @@ -1938,10 +1938,11 @@ static int ipath_do_user_init(struct file *fp, */ if (pd->port_rcvhdrtail_kvaddr) ipath_clear_rcvhdrtail(pd); - set_bit(INFINIPATH_R_PORTENABLE_SHIFT + pd->port_port, + set_bit(dd->ipath_r_portenable_shift + pd->port_port, &dd->ipath_rcvctrl); ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl, - dd->ipath_rcvctrl & ~INFINIPATH_R_TAILUPD); + dd->ipath_rcvctrl & + ~(1ULL << dd->ipath_r_tailupd_shift)); ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl, dd->ipath_rcvctrl); /* Notify any waiting slaves */ @@ -2050,9 +2051,9 @@ static int ipath_close(struct inode *in, struct file *fp) if (dd->ipath_kregbase) { int i; /* atomically clear receive enable port and intr avail. */ - clear_bit(INFINIPATH_R_PORTENABLE_SHIFT + port, + clear_bit(dd->ipath_r_portenable_shift + port, &dd->ipath_rcvctrl); - clear_bit(pd->port_port + INFINIPATH_R_INTRAVAIL_SHIFT, + clear_bit(pd->port_port + dd->ipath_r_intravail_shift, &dd->ipath_rcvctrl); ipath_write_kreg( dd, dd->ipath_kregs->kr_rcvctrl, dd->ipath_rcvctrl); diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c index ddbebe4bdb27..c272a7392e22 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6110.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c @@ -296,6 +296,12 @@ static const struct ipath_cregs ipath_ht_cregs = { #define INFINIPATH_RT_BUFSIZE_MASK 0x3FFFULL #define INFINIPATH_RT_BUFSIZE_SHIFT 48 +#define INFINIPATH_R_INTRAVAIL_SHIFT 16 +#define INFINIPATH_R_TAILUPD_SHIFT 31 + +/* kr_xgxsconfig bits */ +#define INFINIPATH_XGXS_RESET 0x7ULL + /* * masks and bits that are different in different chips, or present only * in one @@ -1079,6 +1085,12 @@ static void ipath_init_ht_variables(struct ipath_devdata *dd) dd->ipath_gpio_sda = IPATH_GPIO_SDA; dd->ipath_gpio_scl = IPATH_GPIO_SCL; + /* Fill in shifts for RcvCtrl. */ + dd->ipath_r_portenable_shift = INFINIPATH_R_PORTENABLE_SHIFT; + dd->ipath_r_intravail_shift = INFINIPATH_R_INTRAVAIL_SHIFT; + dd->ipath_r_tailupd_shift = INFINIPATH_R_TAILUPD_SHIFT; + dd->ipath_r_portcfg_shift = 0; /* Not on IBA6110 */ + dd->ipath_i_bitsextant = (INFINIPATH_I_RCVURG_MASK << INFINIPATH_I_RCVURG_SHIFT) | (INFINIPATH_I_RCVAVAIL_MASK << diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c index 0103d6f4847b..e6893ebc59d4 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6120.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c @@ -296,6 +296,9 @@ static const struct ipath_cregs ipath_pe_cregs = { #define IPATH_GPIO_SCL (1ULL << \ (_IPATH_GPIO_SCL_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT)) +#define INFINIPATH_R_INTRAVAIL_SHIFT 16 +#define INFINIPATH_R_TAILUPD_SHIFT 31 + /* 6120 specific hardware errors... */ static const struct ipath_hwerror_msgs ipath_6120_hwerror_msgs[] = { INFINIPATH_HWE_MSG(PCIEPOISONEDTLP, "PCIe Poisoned TLP"), @@ -916,6 +919,12 @@ static void ipath_init_pe_variables(struct ipath_devdata *dd) dd->ipath_gpio_sda = IPATH_GPIO_SDA; dd->ipath_gpio_scl = IPATH_GPIO_SCL; + /* Fill in shifts for RcvCtrl. */ + dd->ipath_r_portenable_shift = INFINIPATH_R_PORTENABLE_SHIFT; + dd->ipath_r_intravail_shift = INFINIPATH_R_INTRAVAIL_SHIFT; + dd->ipath_r_tailupd_shift = INFINIPATH_R_TAILUPD_SHIFT; + dd->ipath_r_portcfg_shift = 0; /* Not on IBA6120 */ + /* variables for sanity checking interrupt and errors */ dd->ipath_hwe_bitsextant = (INFINIPATH_HWE_RXEMEMPARITYERR_MASK << diff --git a/drivers/infiniband/hw/ipath/ipath_init_chip.c b/drivers/infiniband/hw/ipath/ipath_init_chip.c index e161cad21a19..cf64d3855ff5 100644 --- a/drivers/infiniband/hw/ipath/ipath_init_chip.c +++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c @@ -508,9 +508,9 @@ static void enable_chip(struct ipath_devdata *dd, * enable port 0 receive, and receive interrupt. other ports * done as user opens and inits them. */ - dd->ipath_rcvctrl = INFINIPATH_R_TAILUPD | - (1ULL << INFINIPATH_R_PORTENABLE_SHIFT) | - (1ULL << INFINIPATH_R_INTRAVAIL_SHIFT); + dd->ipath_rcvctrl = (1ULL << dd->ipath_r_tailupd_shift) | + (1ULL << dd->ipath_r_portenable_shift) | + (1ULL << dd->ipath_r_intravail_shift); ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl, dd->ipath_rcvctrl); diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c index ec18b9b1bb08..d9f8342e954f 100644 --- a/drivers/infiniband/hw/ipath/ipath_intr.c +++ b/drivers/infiniband/hw/ipath/ipath_intr.c @@ -975,7 +975,7 @@ static void handle_urcv(struct ipath_devdata *dd, u32 istat) if (portr & (1 << i) && pd && pd->port_cnt) { if (test_and_clear_bit(IPATH_PORT_WAITING_RCV, &pd->port_flag)) { - clear_bit(i + INFINIPATH_R_INTRAVAIL_SHIFT, + clear_bit(i + dd->ipath_r_intravail_shift, &dd->ipath_rcvctrl); wake_up_interruptible(&pd->port_wait); rcvdint = 1; diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h index 72252349eaa9..57e21bbd9ffa 100644 --- a/drivers/infiniband/hw/ipath/ipath_kernel.h +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -550,6 +550,12 @@ struct ipath_devdata { u8 ipath_minrev; /* board rev, from ipath_revision */ u8 ipath_boardrev; + + u8 ipath_r_portenable_shift; + u8 ipath_r_intravail_shift; + u8 ipath_r_tailupd_shift; + u8 ipath_r_portcfg_shift; + /* unit # of this chip, if present */ int ipath_unit; /* saved for restore after reset */ diff --git a/drivers/infiniband/hw/ipath/ipath_registers.h b/drivers/infiniband/hw/ipath/ipath_registers.h index 708eba3165d7..d7181d444ed7 100644 --- a/drivers/infiniband/hw/ipath/ipath_registers.h +++ b/drivers/infiniband/hw/ipath/ipath_registers.h @@ -82,8 +82,7 @@ /* kr_rcvctrl bits */ #define INFINIPATH_R_PORTENABLE_SHIFT 0 -#define INFINIPATH_R_INTRAVAIL_SHIFT 16 -#define INFINIPATH_R_TAILUPD 0x80000000 +#define INFINIPATH_R_QPMAP_ENABLE (1ULL << 38) /* kr_intstatus, kr_intclear, kr_intmask bits */ #define INFINIPATH_I_RCVURG_SHIFT 0 -- cgit v1.2.3-59-g8ed1b From 755807a296f77ca7c31dc000afdfe1e5172bbf72 Mon Sep 17 00:00:00 2001 From: Dave Olson Date: Thu, 6 Dec 2007 00:28:02 -0800 Subject: IB/ipath: Changes for fields moving from devdata to portdata This patch moves some arrays that were defined per-device to be variables defined in the per context data structure, thus avoiding extra kzalloc() calls. Signed-off-by: Dave Olson Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_file_ops.c | 5 +++-- drivers/infiniband/hw/ipath/ipath_init_chip.c | 15 --------------- drivers/infiniband/hw/ipath/ipath_intr.c | 4 ++-- drivers/infiniband/hw/ipath/ipath_kernel.h | 16 ++++++---------- drivers/infiniband/hw/ipath/ipath_stats.c | 13 ++++++------- 5 files changed, 17 insertions(+), 36 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c index 65da7a9808ec..2a75faf1d108 100644 --- a/drivers/infiniband/hw/ipath/ipath_file_ops.c +++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c @@ -1785,6 +1785,7 @@ static int find_shared_port(struct file *fp, } port_fp(fp) = pd; subport_fp(fp) = pd->port_cnt++; + pd->port_subpid[subport_fp(fp)] = current->pid; tidcursor_fp(fp) = 0; pd->active_slaves |= 1 << subport_fp(fp); ipath_cdbg(PROC, @@ -1915,8 +1916,7 @@ static int ipath_do_user_init(struct file *fp, */ head32 = ipath_read_ureg32(dd, ur_rcvegrindextail, pd->port_port); ipath_write_ureg(dd, ur_rcvegrindexhead, head32, pd->port_port); - dd->ipath_lastegrheads[pd->port_port] = -1; - dd->ipath_lastrcvhdrqtails[pd->port_port] = -1; + pd->port_lastrcvhdrqtail = -1; ipath_cdbg(VERBOSE, "Wrote port%d egrhead %x from tail regs\n", pd->port_port, head32); pd->port_tidcursor = 0; /* start at beginning after open */ @@ -2019,6 +2019,7 @@ static int ipath_close(struct inode *in, struct file *fp) * the slave(s) don't wait for receive data forever. */ pd->active_slaves &= ~(1 << fd->subport); + pd->port_subpid[fd->subport] = 0; mutex_unlock(&ipath_mutex); goto bail; } diff --git a/drivers/infiniband/hw/ipath/ipath_init_chip.c b/drivers/infiniband/hw/ipath/ipath_init_chip.c index cf64d3855ff5..98b51465b58d 100644 --- a/drivers/infiniband/hw/ipath/ipath_init_chip.c +++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c @@ -272,22 +272,7 @@ static int init_chip_first(struct ipath_devdata *dd, goto done; } - dd->ipath_lastegrheads = kzalloc(sizeof(*dd->ipath_lastegrheads) - * dd->ipath_cfgports, - GFP_KERNEL); - dd->ipath_lastrcvhdrqtails = - kzalloc(sizeof(*dd->ipath_lastrcvhdrqtails) - * dd->ipath_cfgports, GFP_KERNEL); - - if (!dd->ipath_lastegrheads || !dd->ipath_lastrcvhdrqtails) { - ipath_dev_err(dd, "Unable to allocate head arrays, " - "failing\n"); - ret = -ENOMEM; - goto done; - } - pd = create_portdata0(dd); - if (!pd) { ipath_dev_err(dd, "Unable to allocate portdata for port " "0, failing\n"); diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c index d9f8342e954f..e2ce5314504d 100644 --- a/drivers/infiniband/hw/ipath/ipath_intr.c +++ b/drivers/infiniband/hw/ipath/ipath_intr.c @@ -693,7 +693,7 @@ static int handle_errors(struct ipath_devdata *dd, ipath_err_t errs) * except kernel */ tl = *(u64 *) pd->port_rcvhdrtail_kvaddr; - if (tl == dd->ipath_lastrcvhdrqtails[i]) + if (tl == pd->port_lastrcvhdrqtail) continue; hd = ipath_read_ureg32(dd, ur_rcvhdrhead, i); @@ -703,7 +703,7 @@ static int handle_errors(struct ipath_devdata *dd, ipath_err_t errs) (!hd && tl == dd->ipath_hdrqlast)) { if (i == 0) chkerrpkts = 1; - dd->ipath_lastrcvhdrqtails[i] = tl; + pd->port_lastrcvhdrqtail = tl; pd->port_hdrqfull++; /* flush hdrqfull so that poll() sees it */ wmb(); diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h index 57e21bbd9ffa..7bb0d08820d8 100644 --- a/drivers/infiniband/hw/ipath/ipath_kernel.h +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -141,6 +141,11 @@ struct ipath_portdata { u32 port_pionowait; /* total number of rcvhdrqfull errors */ u32 port_hdrqfull; + /* + * Used to suppress multiple instances of same + * port staying stuck at same point. + */ + u32 port_lastrcvhdrqtail; /* saved total number of rcvhdrqfull errors for poll edge trigger */ u32 port_hdrqfull_poll; /* total number of polled urgent packets */ @@ -149,6 +154,7 @@ struct ipath_portdata { u32 port_urgent_poll; /* pid of process using this port */ pid_t port_pid; + pid_t port_subpid[INFINIPATH_MAX_SUBPORT]; /* same size as task_struct .comm[] */ char port_comm[16]; /* pkeys set by this use of this port */ @@ -319,16 +325,6 @@ struct ipath_devdata { /* count of port 0 hdrqfull errors */ u32 ipath_p0_hdrqfull; - /* - * (*cfgports) used to suppress multiple instances of same - * port staying stuck at same point - */ - u32 *ipath_lastrcvhdrqtails; - /* - * (*cfgports) used to suppress multiple instances of same - * port staying stuck at same point - */ - u32 *ipath_lastegrheads; /* * index of last piobuffer we used. Speeds up searching, by * starting at this point. Doesn't matter if multiple cpu's use and diff --git a/drivers/infiniband/hw/ipath/ipath_stats.c b/drivers/infiniband/hw/ipath/ipath_stats.c index fd897652da6a..d2725cd11bdc 100644 --- a/drivers/infiniband/hw/ipath/ipath_stats.c +++ b/drivers/infiniband/hw/ipath/ipath_stats.c @@ -238,7 +238,7 @@ static void ipath_chk_errormask(struct ipath_devdata *dd) void ipath_get_faststats(unsigned long opaque) { struct ipath_devdata *dd = (struct ipath_devdata *) opaque; - u32 val; + int i; static unsigned cnt; unsigned long flags; u64 traffic_wds; @@ -322,12 +322,11 @@ void ipath_get_faststats(unsigned long opaque) /* limit qfull messages to ~one per minute per port */ if ((++cnt & 0x10)) { - for (val = dd->ipath_cfgports - 1; ((int)val) >= 0; - val--) { - if (dd->ipath_lastegrheads[val] != -1) - dd->ipath_lastegrheads[val] = -1; - if (dd->ipath_lastrcvhdrqtails[val] != -1) - dd->ipath_lastrcvhdrqtails[val] = -1; + for (i = (int) dd->ipath_cfgports; --i >= 0; ) { + struct ipath_portdata *pd = dd->ipath_pd[i]; + + if (pd && pd->port_lastrcvhdrqtail != -1) + pd->port_lastrcvhdrqtail = -1; } } -- cgit v1.2.3-59-g8ed1b From a9e527e3f9f4510e9f3450ca3bc51bc3ef2854fd Mon Sep 17 00:00:00 2001 From: Rolf Manderscheid Date: Mon, 10 Dec 2007 13:38:41 -0700 Subject: IPoIB: improve IPv4/IPv6 to IB mcast mapping functions An IPoIB subnet on an IB fabric that spans multiple IB subnets can't use link-local scope in multicast GIDs. The existing routines that map IP/IPv6 multicast addresses into IB link-level addresses hard-code the scope to link-local, and they also leave the partition key field uninitialised. This patch adds a parameter (the link-level broadcast address) to the mapping routines, allowing them to initialise both the scope and the P_Key appropriately, and fixes up the call sites. The next step will be to add a way to configure the scope for an IPoIB interface. Signed-off-by: Rolf Manderscheid Signed-off-by: Roland Dreier --- drivers/infiniband/core/cma.c | 4 +--- drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 4 ---- include/net/if_inet6.h | 11 +++++++---- include/net/ip.h | 10 ++++++---- net/ipv4/arp.c | 2 +- net/ipv6/ndisc.c | 2 +- 6 files changed, 16 insertions(+), 17 deletions(-) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 312ec74f3d18..982836e69f55 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -2610,11 +2610,9 @@ static void cma_set_mgid(struct rdma_id_private *id_priv, /* IPv6 address is an SA assigned MGID. */ memcpy(mgid, &sin6->sin6_addr, sizeof *mgid); } else { - ip_ib_mc_map(sin->sin_addr.s_addr, mc_map); + ip_ib_mc_map(sin->sin_addr.s_addr, dev_addr->broadcast, mc_map); if (id_priv->id.ps == RDMA_PS_UDP) mc_map[7] = 0x01; /* Use RDMA CM signature */ - mc_map[8] = ib_addr_get_pkey(dev_addr) >> 8; - mc_map[9] = (unsigned char) ib_addr_get_pkey(dev_addr); *mgid = *(union ib_gid *) (mc_map + 4); } } diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index 858ada17f980..2628339e3a99 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -788,10 +788,6 @@ void ipoib_mcast_restart_task(struct work_struct *work) memcpy(mgid.raw, mclist->dmi_addr + 4, sizeof mgid); - /* Add in the P_Key */ - mgid.raw[4] = (priv->pkey >> 8) & 0xff; - mgid.raw[5] = priv->pkey & 0xff; - mcast = __ipoib_mcast_find(dev, &mgid); if (!mcast || test_bit(IPOIB_MCAST_FLAG_SENDONLY, &mcast->flags)) { struct ipoib_mcast *nmcast; diff --git a/include/net/if_inet6.h b/include/net/if_inet6.h index 448eccb20638..b24508abb850 100644 --- a/include/net/if_inet6.h +++ b/include/net/if_inet6.h @@ -269,18 +269,21 @@ static inline void ipv6_arcnet_mc_map(const struct in6_addr *addr, char *buf) buf[0] = 0x00; } -static inline void ipv6_ib_mc_map(struct in6_addr *addr, char *buf) +static inline void ipv6_ib_mc_map(const struct in6_addr *addr, + const unsigned char *broadcast, char *buf) { + unsigned char scope = broadcast[5] & 0xF; + buf[0] = 0; /* Reserved */ buf[1] = 0xff; /* Multicast QPN */ buf[2] = 0xff; buf[3] = 0xff; buf[4] = 0xff; - buf[5] = 0x12; /* link local scope */ + buf[5] = 0x10 | scope; /* scope from broadcast address */ buf[6] = 0x60; /* IPv6 signature */ buf[7] = 0x1b; - buf[8] = 0; /* P_Key */ - buf[9] = 0; + buf[8] = broadcast[8]; /* P_Key */ + buf[9] = broadcast[9]; memcpy(buf + 10, addr->s6_addr + 6, 10); } #endif diff --git a/include/net/ip.h b/include/net/ip.h index 840dd91b513b..50c8889b1b8d 100644 --- a/include/net/ip.h +++ b/include/net/ip.h @@ -266,20 +266,22 @@ static inline void ip_eth_mc_map(__be32 naddr, char *buf) * Leave P_Key as 0 to be filled in by driver. */ -static inline void ip_ib_mc_map(__be32 naddr, char *buf) +static inline void ip_ib_mc_map(__be32 naddr, const unsigned char *broadcast, char *buf) { __u32 addr; + unsigned char scope = broadcast[5] & 0xF; + buf[0] = 0; /* Reserved */ buf[1] = 0xff; /* Multicast QPN */ buf[2] = 0xff; buf[3] = 0xff; addr = ntohl(naddr); buf[4] = 0xff; - buf[5] = 0x12; /* link local scope */ + buf[5] = 0x10 | scope; /* scope from broadcast address */ buf[6] = 0x40; /* IPv4 signature */ buf[7] = 0x1b; - buf[8] = 0; /* P_Key */ - buf[9] = 0; + buf[8] = broadcast[8]; /* P_Key */ + buf[9] = broadcast[9]; buf[10] = 0; buf[11] = 0; buf[12] = 0; diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c index 08174a2aa878..54a76b8b803a 100644 --- a/net/ipv4/arp.c +++ b/net/ipv4/arp.c @@ -211,7 +211,7 @@ int arp_mc_map(__be32 addr, u8 *haddr, struct net_device *dev, int dir) ip_tr_mc_map(addr, haddr); return 0; case ARPHRD_INFINIBAND: - ip_ib_mc_map(addr, haddr); + ip_ib_mc_map(addr, dev->broadcast, haddr); return 0; default: if (dir) { diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 777ed733b2d7..85947eae5bf7 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -337,7 +337,7 @@ int ndisc_mc_map(struct in6_addr *addr, char *buf, struct net_device *dev, int d ipv6_arcnet_mc_map(addr, buf); return 0; case ARPHRD_INFINIBAND: - ipv6_ib_mc_map(addr, buf); + ipv6_ib_mc_map(addr, dev->broadcast, buf); return 0; default: if (dir) { -- cgit v1.2.3-59-g8ed1b From 8cba2077325b361dedf058c7dfc6c33691422497 Mon Sep 17 00:00:00 2001 From: David Dillow Date: Wed, 19 Dec 2007 17:08:43 -0500 Subject: IB/srp: Respect target credit limit The current SRP initiator will send requests even if it has no credits available. The results of sending extra requests are vendor specific, but on some devices, overrunning credits will cost 85% of peak performance -- e.g. 100 MB/s vs 720 MB/s. Other devices may just drop the requests. This patch will tell the SCSI midlayer to queue requests if there are fewer than two credits remaining, and will not issue a task management request if there are no credits remaining. The mid-layer will retry the queued command once an outstanding command completes. The patch also removes the unlikely() in __srp_get_tx_iu(), as it is not at all unlikely to hit this limit under heavy load. Signed-off-by: David Dillow Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/srp/ib_srp.c | 13 +++++++++---- drivers/infiniband/ulp/srp/ib_srp.h | 5 +++++ 2 files changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c index bdb6f8517401..e98d0612d7ac 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.c +++ b/drivers/infiniband/ulp/srp/ib_srp.c @@ -930,13 +930,18 @@ static int srp_post_recv(struct srp_target_port *target) * req_lim and tx_head. Lock cannot be dropped between call here and * call to __srp_post_send(). */ -static struct srp_iu *__srp_get_tx_iu(struct srp_target_port *target) +static struct srp_iu *__srp_get_tx_iu(struct srp_target_port *target, + enum srp_request_type req_type) { + s32 min = (req_type == SRP_REQ_TASK_MGMT) ? 1 : 2; + if (target->tx_head - target->tx_tail >= SRP_SQ_SIZE) return NULL; - if (unlikely(target->req_lim < 1)) + if (target->req_lim < min) { ++target->zero_req_lim; + return NULL; + } return target->tx_ring[target->tx_head & SRP_SQ_SIZE]; } @@ -993,7 +998,7 @@ static int srp_queuecommand(struct scsi_cmnd *scmnd, return 0; } - iu = __srp_get_tx_iu(target); + iu = __srp_get_tx_iu(target, SRP_REQ_NORMAL); if (!iu) goto err; @@ -1283,7 +1288,7 @@ static int srp_send_tsk_mgmt(struct srp_target_port *target, init_completion(&req->done); - iu = __srp_get_tx_iu(target); + iu = __srp_get_tx_iu(target, SRP_REQ_TASK_MGMT); if (!iu) goto out; diff --git a/drivers/infiniband/ulp/srp/ib_srp.h b/drivers/infiniband/ulp/srp/ib_srp.h index e3573e7038c4..4a3c1f37e4c2 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.h +++ b/drivers/infiniband/ulp/srp/ib_srp.h @@ -79,6 +79,11 @@ enum srp_target_state { SRP_TARGET_REMOVED }; +enum srp_request_type { + SRP_REQ_NORMAL, + SRP_REQ_TASK_MGMT, +}; + struct srp_device { struct list_head dev_list; struct ib_device *dev; -- cgit v1.2.3-59-g8ed1b From fff09a8e6e726f0752254e1f46f7224e3bebb302 Mon Sep 17 00:00:00 2001 From: David Dillow Date: Wed, 19 Dec 2007 17:09:15 -0500 Subject: IB/srp: Enable SG list chaining By default, the SCSI mid-layer seems to send down 512KB requests (sg_tablesize = 256), with some requests occasionally combined. By allowing the mid-layer to chain requests, we can easily grow to 1024KB or larger -- I've tested 4096KB I/O requests with no problems. I looked through the DMA paths on the hardware drivers to ensure they could take advantage of the SG chaining, and it seems that every one except ipath uses the system's DMA routines, which have been converted to handle chaining. ipath looks like it should be OK, but I have no way to test it. Signed-off-by: David Dillow [ Tested on ipath. - Roland ] Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/srp/ib_srp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c index e98d0612d7ac..66dade7ab38b 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.c +++ b/drivers/infiniband/ulp/srp/ib_srp.c @@ -1548,6 +1548,7 @@ static struct scsi_host_template srp_template = { .this_id = -1, .cmd_per_lun = SRP_SQ_SIZE, .use_clustering = ENABLE_CLUSTERING, + .use_sg_chaining = ENABLE_SG_CHAINING, .shost_attrs = srp_host_attrs }; -- cgit v1.2.3-59-g8ed1b From 586a693448676de5174e752426ced69ec79ab174 Mon Sep 17 00:00:00 2001 From: Pradeep Satyanarayana Date: Fri, 21 Dec 2007 13:08:23 -0800 Subject: IPoIB/CM: Enable SRQ support on HCAs that support fewer than 16 SG entries Some HCAs (such as ehca2) support SRQ, but only support fewer than 16 SG entries for SRQs. Currently IPoIB/CM implicitly assumes all HCAs will support 16 SG entries for SRQs (to handle a 64K MTU with 4K pages). This patch removes that restriction by limiting the maximum MTU in connected mode to what the maximum number of SRQ SG entries allows. This patch addresses Signed-off-by: Pradeep Satyanarayana Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib.h | 13 ++++++++++ drivers/infiniband/ulp/ipoib/ipoib_cm.c | 41 ++++++++++++++++++++++--------- drivers/infiniband/ulp/ipoib/ipoib_main.c | 9 ++++--- 3 files changed, 49 insertions(+), 14 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index d35025f0652b..fe250c60607d 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -238,6 +238,8 @@ struct ipoib_cm_dev_priv { struct ib_sge rx_sge[IPOIB_CM_RX_SG]; struct ib_recv_wr rx_wr; int nonsrq_conn_qp; + int max_cm_mtu; + int num_frags; }; /* @@ -503,6 +505,12 @@ static inline int ipoib_cm_has_srq(struct net_device *dev) return !!priv->cm.srq; } +static inline unsigned int ipoib_cm_max_mtu(struct net_device *dev) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + return priv->cm.max_cm_mtu; +} + void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_tx *tx); int ipoib_cm_dev_open(struct net_device *dev); void ipoib_cm_dev_stop(struct net_device *dev); @@ -552,6 +560,11 @@ static inline int ipoib_cm_has_srq(struct net_device *dev) return 0; } +static inline unsigned int ipoib_cm_max_mtu(struct net_device *dev) +{ + return 0; +} + static inline void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_tx *tx) { diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index fdf33cecc6d5..1818f958c250 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -96,13 +96,13 @@ static int ipoib_cm_post_receive_srq(struct net_device *dev, int id) priv->cm.rx_wr.wr_id = id | IPOIB_OP_CM | IPOIB_OP_RECV; - for (i = 0; i < IPOIB_CM_RX_SG; ++i) + for (i = 0; i < priv->cm.num_frags; ++i) priv->cm.rx_sge[i].addr = priv->cm.srq_ring[id].mapping[i]; ret = ib_post_srq_recv(priv->cm.srq, &priv->cm.rx_wr, &bad_wr); if (unlikely(ret)) { ipoib_warn(priv, "post srq failed for buf %d (%d)\n", id, ret); - ipoib_cm_dma_unmap_rx(priv, IPOIB_CM_RX_SG - 1, + ipoib_cm_dma_unmap_rx(priv, priv->cm.num_frags - 1, priv->cm.srq_ring[id].mapping); dev_kfree_skb_any(priv->cm.srq_ring[id].skb); priv->cm.srq_ring[id].skb = NULL; @@ -1399,13 +1399,13 @@ int ipoib_cm_add_mode_attr(struct net_device *dev) return device_create_file(&dev->dev, &dev_attr_mode); } -static void ipoib_cm_create_srq(struct net_device *dev) +static void ipoib_cm_create_srq(struct net_device *dev, int max_sge) { struct ipoib_dev_priv *priv = netdev_priv(dev); struct ib_srq_init_attr srq_init_attr = { .attr = { .max_wr = ipoib_recvq_size, - .max_sge = IPOIB_CM_RX_SG + .max_sge = max_sge } }; @@ -1431,7 +1431,8 @@ static void ipoib_cm_create_srq(struct net_device *dev) int ipoib_cm_dev_init(struct net_device *dev) { struct ipoib_dev_priv *priv = netdev_priv(dev); - int i; + int i, ret; + struct ib_device_attr attr; INIT_LIST_HEAD(&priv->cm.passive_ids); INIT_LIST_HEAD(&priv->cm.reap_list); @@ -1448,22 +1449,40 @@ int ipoib_cm_dev_init(struct net_device *dev) skb_queue_head_init(&priv->cm.skb_queue); - for (i = 0; i < IPOIB_CM_RX_SG; ++i) + ret = ib_query_device(priv->ca, &attr); + if (ret) { + printk(KERN_WARNING "ib_query_device() failed with %d\n", ret); + return ret; + } + + ipoib_dbg(priv, "max_srq_sge=%d\n", attr.max_srq_sge); + + attr.max_srq_sge = min_t(int, IPOIB_CM_RX_SG, attr.max_srq_sge); + ipoib_cm_create_srq(dev, attr.max_srq_sge); + if (ipoib_cm_has_srq(dev)) { + priv->cm.max_cm_mtu = attr.max_srq_sge * PAGE_SIZE - 0x10; + priv->cm.num_frags = attr.max_srq_sge; + ipoib_dbg(priv, "max_cm_mtu = 0x%x, num_frags=%d\n", + priv->cm.max_cm_mtu, priv->cm.num_frags); + } else { + priv->cm.max_cm_mtu = IPOIB_CM_MTU; + priv->cm.num_frags = IPOIB_CM_RX_SG; + } + + for (i = 0; i < priv->cm.num_frags; ++i) priv->cm.rx_sge[i].lkey = priv->mr->lkey; priv->cm.rx_sge[0].length = IPOIB_CM_HEAD_SIZE; - for (i = 1; i < IPOIB_CM_RX_SG; ++i) + for (i = 1; i < priv->cm.num_frags; ++i) priv->cm.rx_sge[i].length = PAGE_SIZE; priv->cm.rx_wr.next = NULL; priv->cm.rx_wr.sg_list = priv->cm.rx_sge; - priv->cm.rx_wr.num_sge = IPOIB_CM_RX_SG; - - ipoib_cm_create_srq(dev); + priv->cm.rx_wr.num_sge = priv->cm.num_frags; if (ipoib_cm_has_srq(dev)) { for (i = 0; i < ipoib_recvq_size; ++i) { if (!ipoib_cm_alloc_rx_skb(dev, priv->cm.srq_ring, i, - IPOIB_CM_RX_SG - 1, + priv->cm.num_frags - 1, priv->cm.srq_ring[i].mapping)) { ipoib_warn(priv, "failed to allocate " "receive buffer %d\n", i); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 3bfc2ef1303e..d7330451685c 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -182,17 +182,20 @@ static int ipoib_change_mtu(struct net_device *dev, int new_mtu) struct ipoib_dev_priv *priv = netdev_priv(dev); /* dev->mtu > 2K ==> connected mode */ - if (ipoib_cm_admin_enabled(dev) && new_mtu <= IPOIB_CM_MTU) { + if (ipoib_cm_admin_enabled(dev)) { + if (new_mtu > ipoib_cm_max_mtu(dev)) + return -EINVAL; + if (new_mtu > priv->mcast_mtu) ipoib_warn(priv, "mtu > %d will cause multicast packet drops.\n", priv->mcast_mtu); + dev->mtu = new_mtu; return 0; } - if (new_mtu > IPOIB_PACKET_SIZE - IPOIB_ENCAP_LEN) { + if (new_mtu > IPOIB_PACKET_SIZE - IPOIB_ENCAP_LEN) return -EINVAL; - } priv->admin_mtu = new_mtu; -- cgit v1.2.3-59-g8ed1b From 7aa54bd730df1468c90ae84b56ade7f322b44de7 Mon Sep 17 00:00:00 2001 From: David Dillow Date: Mon, 7 Jan 2008 18:23:41 -0500 Subject: IB/srp: Add identifying information to log messages When you have multiple targets, it gets really confusing when you try to track down who did a reset when there is no identifying information in the log message, especially when the same extension ID is mapped through two different local IB ports. So, add an identifier that can be used to track back to which local IB port/remote target pair is the one having problems. Signed-off-by: David Dillow Acked-by: Pete Wyckoff Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/srp/ib_srp.c | 117 ++++++++++++++++++++++-------------- 1 file changed, 71 insertions(+), 46 deletions(-) diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c index 66dade7ab38b..f2d2c7e2c76b 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.c +++ b/drivers/infiniband/ulp/srp/ib_srp.c @@ -272,7 +272,8 @@ static void srp_path_rec_completion(int status, target->status = status; if (status) - printk(KERN_ERR PFX "Got failed path rec status %d\n", status); + shost_printk(KERN_ERR, target->scsi_host, + PFX "Got failed path rec status %d\n", status); else target->path = *pathrec; complete(&target->done); @@ -303,7 +304,8 @@ static int srp_lookup_path(struct srp_target_port *target) wait_for_completion(&target->done); if (target->status < 0) - printk(KERN_WARNING PFX "Path record query failed\n"); + shost_printk(KERN_WARNING, target->scsi_host, + PFX "Path record query failed\n"); return target->status; } @@ -379,9 +381,10 @@ static int srp_send_req(struct srp_target_port *target) * the second 8 bytes to the local node GUID. */ if (srp_target_is_topspin(target)) { - printk(KERN_DEBUG PFX "Topspin/Cisco initiator port ID workaround " - "activated for target GUID %016llx\n", - (unsigned long long) be64_to_cpu(target->ioc_guid)); + shost_printk(KERN_DEBUG, target->scsi_host, + PFX "Topspin/Cisco initiator port ID workaround " + "activated for target GUID %016llx\n", + (unsigned long long) be64_to_cpu(target->ioc_guid)); memset(req->priv.initiator_port_id, 0, 8); memcpy(req->priv.initiator_port_id + 8, &target->srp_host->dev->dev->node_guid, 8); @@ -400,7 +403,8 @@ static void srp_disconnect_target(struct srp_target_port *target) init_completion(&target->done); if (ib_send_cm_dreq(target->cm_id, NULL, 0)) { - printk(KERN_DEBUG PFX "Sending CM DREQ failed\n"); + shost_printk(KERN_DEBUG, target->scsi_host, + PFX "Sending CM DREQ failed\n"); return; } wait_for_completion(&target->done); @@ -568,7 +572,8 @@ static int srp_reconnect_target(struct srp_target_port *target) return ret; err: - printk(KERN_ERR PFX "reconnect failed (%d), removing target port.\n", ret); + shost_printk(KERN_ERR, target->scsi_host, + PFX "reconnect failed (%d), removing target port.\n", ret); /* * We couldn't reconnect, so kill our target port off. @@ -683,8 +688,9 @@ static int srp_map_data(struct scsi_cmnd *scmnd, struct srp_target_port *target, if (scmnd->sc_data_direction != DMA_FROM_DEVICE && scmnd->sc_data_direction != DMA_TO_DEVICE) { - printk(KERN_WARNING PFX "Unhandled data direction %d\n", - scmnd->sc_data_direction); + shost_printk(KERN_WARNING, target->scsi_host, + PFX "Unhandled data direction %d\n", + scmnd->sc_data_direction); return -EINVAL; } @@ -786,8 +792,9 @@ static void srp_process_rsp(struct srp_target_port *target, struct srp_rsp *rsp) } else { scmnd = req->scmnd; if (!scmnd) - printk(KERN_ERR "Null scmnd for RSP w/tag %016llx\n", - (unsigned long long) rsp->tag); + shost_printk(KERN_ERR, target->scsi_host, + "Null scmnd for RSP w/tag %016llx\n", + (unsigned long long) rsp->tag); scmnd->result = rsp->status; if (rsp->flags & SRP_RSP_FLAG_SNSVALID) { @@ -831,7 +838,8 @@ static void srp_handle_recv(struct srp_target_port *target, struct ib_wc *wc) if (0) { int i; - printk(KERN_ERR PFX "recv completion, opcode 0x%02x\n", opcode); + shost_printk(KERN_ERR, target->scsi_host, + PFX "recv completion, opcode 0x%02x\n", opcode); for (i = 0; i < wc->byte_len; ++i) { if (i % 8 == 0) @@ -852,11 +860,13 @@ static void srp_handle_recv(struct srp_target_port *target, struct ib_wc *wc) case SRP_T_LOGOUT: /* XXX Handle target logout */ - printk(KERN_WARNING PFX "Got target logout request\n"); + shost_printk(KERN_WARNING, target->scsi_host, + PFX "Got target logout request\n"); break; default: - printk(KERN_WARNING PFX "Unhandled SRP opcode 0x%02x\n", opcode); + shost_printk(KERN_WARNING, target->scsi_host, + PFX "Unhandled SRP opcode 0x%02x\n", opcode); break; } @@ -872,9 +882,10 @@ static void srp_completion(struct ib_cq *cq, void *target_ptr) ib_req_notify_cq(cq, IB_CQ_NEXT_COMP); while (ib_poll_cq(cq, 1, &wc) > 0) { if (wc.status) { - printk(KERN_ERR PFX "failed %s status %d\n", - wc.wr_id & SRP_OP_RECV ? "receive" : "send", - wc.status); + shost_printk(KERN_ERR, target->scsi_host, + PFX "failed %s status %d\n", + wc.wr_id & SRP_OP_RECV ? "receive" : "send", + wc.status); target->qp_in_error = 1; break; } @@ -1027,12 +1038,13 @@ static int srp_queuecommand(struct scsi_cmnd *scmnd, len = srp_map_data(scmnd, target, req); if (len < 0) { - printk(KERN_ERR PFX "Failed to map data\n"); + shost_printk(KERN_ERR, target->scsi_host, + PFX "Failed to map data\n"); goto err; } if (__srp_post_recv(target)) { - printk(KERN_ERR PFX "Recv failed\n"); + shost_printk(KERN_ERR, target->scsi_host, PFX "Recv failed\n"); goto err_unmap; } @@ -1040,7 +1052,7 @@ static int srp_queuecommand(struct scsi_cmnd *scmnd, DMA_TO_DEVICE); if (__srp_post_send(target, iu, len)) { - printk(KERN_ERR PFX "Send failed\n"); + shost_printk(KERN_ERR, target->scsi_host, PFX "Send failed\n"); goto err_unmap; } @@ -1095,6 +1107,7 @@ static void srp_cm_rej_handler(struct ib_cm_id *cm_id, struct ib_cm_event *event, struct srp_target_port *target) { + struct Scsi_Host *shost = target->scsi_host; struct ib_class_port_info *cpi; int opcode; @@ -1120,19 +1133,22 @@ static void srp_cm_rej_handler(struct ib_cm_id *cm_id, memcpy(target->path.dgid.raw, event->param.rej_rcvd.ari, 16); - printk(KERN_DEBUG PFX "Topspin/Cisco redirect to target port GID %016llx%016llx\n", - (unsigned long long) be64_to_cpu(target->path.dgid.global.subnet_prefix), - (unsigned long long) be64_to_cpu(target->path.dgid.global.interface_id)); + shost_printk(KERN_DEBUG, shost, + PFX "Topspin/Cisco redirect to target port GID %016llx%016llx\n", + (unsigned long long) be64_to_cpu(target->path.dgid.global.subnet_prefix), + (unsigned long long) be64_to_cpu(target->path.dgid.global.interface_id)); target->status = SRP_PORT_REDIRECT; } else { - printk(KERN_WARNING " REJ reason: IB_CM_REJ_PORT_REDIRECT\n"); + shost_printk(KERN_WARNING, shost, + " REJ reason: IB_CM_REJ_PORT_REDIRECT\n"); target->status = -ECONNRESET; } break; case IB_CM_REJ_DUPLICATE_LOCAL_COMM_ID: - printk(KERN_WARNING " REJ reason: IB_CM_REJ_DUPLICATE_LOCAL_COMM_ID\n"); + shost_printk(KERN_WARNING, shost, + " REJ reason: IB_CM_REJ_DUPLICATE_LOCAL_COMM_ID\n"); target->status = -ECONNRESET; break; @@ -1143,20 +1159,21 @@ static void srp_cm_rej_handler(struct ib_cm_id *cm_id, u32 reason = be32_to_cpu(rej->reason); if (reason == SRP_LOGIN_REJ_REQ_IT_IU_LENGTH_TOO_LARGE) - printk(KERN_WARNING PFX - "SRP_LOGIN_REJ: requested max_it_iu_len too large\n"); + shost_printk(KERN_WARNING, shost, + PFX "SRP_LOGIN_REJ: requested max_it_iu_len too large\n"); else - printk(KERN_WARNING PFX - "SRP LOGIN REJECTED, reason 0x%08x\n", reason); + shost_printk(KERN_WARNING, shost, + PFX "SRP LOGIN REJECTED, reason 0x%08x\n", reason); } else - printk(KERN_WARNING " REJ reason: IB_CM_REJ_CONSUMER_DEFINED," - " opcode 0x%02x\n", opcode); + shost_printk(KERN_WARNING, shost, + " REJ reason: IB_CM_REJ_CONSUMER_DEFINED," + " opcode 0x%02x\n", opcode); target->status = -ECONNRESET; break; default: - printk(KERN_WARNING " REJ reason 0x%x\n", - event->param.rej_rcvd.reason); + shost_printk(KERN_WARNING, shost, " REJ reason 0x%x\n", + event->param.rej_rcvd.reason); target->status = -ECONNRESET; } } @@ -1171,7 +1188,8 @@ static int srp_cm_handler(struct ib_cm_id *cm_id, struct ib_cm_event *event) switch (event->event) { case IB_CM_REQ_ERROR: - printk(KERN_DEBUG PFX "Sending CM REQ failed\n"); + shost_printk(KERN_DEBUG, target->scsi_host, + PFX "Sending CM REQ failed\n"); comp = 1; target->status = -ECONNRESET; break; @@ -1189,7 +1207,8 @@ static int srp_cm_handler(struct ib_cm_id *cm_id, struct ib_cm_event *event) target->scsi_host->can_queue = min(target->req_lim, target->scsi_host->can_queue); } else { - printk(KERN_WARNING PFX "Unhandled RSP opcode %#x\n", opcode); + shost_printk(KERN_WARNING, target->scsi_host, + PFX "Unhandled RSP opcode %#x\n", opcode); target->status = -ECONNRESET; break; } @@ -1235,20 +1254,23 @@ static int srp_cm_handler(struct ib_cm_id *cm_id, struct ib_cm_event *event) break; case IB_CM_REJ_RECEIVED: - printk(KERN_DEBUG PFX "REJ received\n"); + shost_printk(KERN_DEBUG, target->scsi_host, PFX "REJ received\n"); comp = 1; srp_cm_rej_handler(cm_id, event, target); break; case IB_CM_DREQ_RECEIVED: - printk(KERN_WARNING PFX "DREQ received - connection closed\n"); + shost_printk(KERN_WARNING, target->scsi_host, + PFX "DREQ received - connection closed\n"); if (ib_send_cm_drep(cm_id, NULL, 0)) - printk(KERN_ERR PFX "Sending CM DREP failed\n"); + shost_printk(KERN_ERR, target->scsi_host, + PFX "Sending CM DREP failed\n"); break; case IB_CM_TIMEWAIT_EXIT: - printk(KERN_ERR PFX "connection closed\n"); + shost_printk(KERN_ERR, target->scsi_host, + PFX "connection closed\n"); comp = 1; target->status = 0; @@ -1260,7 +1282,8 @@ static int srp_cm_handler(struct ib_cm_id *cm_id, struct ib_cm_event *event) break; default: - printk(KERN_WARNING PFX "Unhandled CM event %d\n", event->event); + shost_printk(KERN_WARNING, target->scsi_host, + PFX "Unhandled CM event %d\n", event->event); break; } @@ -1337,7 +1360,7 @@ static int srp_abort(struct scsi_cmnd *scmnd) struct srp_request *req; int ret = SUCCESS; - printk(KERN_ERR "SRP abort called\n"); + shost_printk(KERN_ERR, target->scsi_host, "SRP abort called\n"); if (target->qp_in_error) return FAILED; @@ -1367,7 +1390,7 @@ static int srp_reset_device(struct scsi_cmnd *scmnd) struct srp_target_port *target = host_to_target(scmnd->device->host); struct srp_request *req, *tmp; - printk(KERN_ERR "SRP reset_device called\n"); + shost_printk(KERN_ERR, target->scsi_host, "SRP reset_device called\n"); if (target->qp_in_error) return FAILED; @@ -1394,7 +1417,7 @@ static int srp_reset_host(struct scsi_cmnd *scmnd) struct srp_target_port *target = host_to_target(scmnd->device->host); int ret = FAILED; - printk(KERN_ERR PFX "SRP reset_host called\n"); + shost_printk(KERN_ERR, target->scsi_host, PFX "SRP reset_host called\n"); if (!srp_reconnect_target(target)) ret = SUCCESS; @@ -1820,8 +1843,9 @@ static ssize_t srp_create_target(struct class_device *class_dev, ib_get_cached_gid(host->dev->dev, host->port, 0, &target->path.sgid); - printk(KERN_DEBUG PFX "new target: id_ext %016llx ioc_guid %016llx pkey %04x " - "service_id %016llx dgid %04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x\n", + shost_printk(KERN_DEBUG, target->scsi_host, PFX + "new target: id_ext %016llx ioc_guid %016llx pkey %04x " + "service_id %016llx dgid %04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x\n", (unsigned long long) be64_to_cpu(target->id_ext), (unsigned long long) be64_to_cpu(target->ioc_guid), be16_to_cpu(target->path.pkey), @@ -1848,7 +1872,8 @@ static ssize_t srp_create_target(struct class_device *class_dev, target->qp_in_error = 0; ret = srp_connect_target(target); if (ret) { - printk(KERN_ERR PFX "Connection failed\n"); + shost_printk(KERN_ERR, target->scsi_host, + PFX "Connection failed\n"); goto err_cm_id; } -- cgit v1.2.3-59-g8ed1b From 6c719cae0b91f577738dfb4007baee28f03e48a5 Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Sun, 6 Jan 2008 21:02:33 -0800 Subject: IB/ipath: MAD performance sampling registers support Add support for QLogic HCAs which have hardware performance sampling registers for PortSamplesControl and PortSamplesResult MADs. Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_kernel.h | 9 ++ drivers/infiniband/hw/ipath/ipath_mad.c | 119 ++++++++++++++++---------- drivers/infiniband/hw/ipath/ipath_registers.h | 14 +++ drivers/infiniband/hw/ipath/ipath_verbs.c | 1 + drivers/infiniband/hw/ipath/ipath_verbs.h | 2 + 5 files changed, 101 insertions(+), 44 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h index 7bb0d08820d8..a59c06943de6 100644 --- a/drivers/infiniband/hw/ipath/ipath_kernel.h +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -930,6 +930,15 @@ static inline u32 ipath_read_creg32(const struct ipath_devdata *dd, (char __iomem *)dd->ipath_kregbase)); } +static inline void ipath_write_creg(const struct ipath_devdata *dd, + ipath_creg regno, u64 value) +{ + if (dd->ipath_kregbase) + writeq(value, regno + (u64 __iomem *) + (dd->ipath_cregbase + + (char __iomem *)dd->ipath_kregbase)); +} + static inline void ipath_clear_rcvhdrtail(const struct ipath_portdata *pd) { *((u64 *) pd->port_rcvhdrtail_kvaddr) = 0ULL; diff --git a/drivers/infiniband/hw/ipath/ipath_mad.c b/drivers/infiniband/hw/ipath/ipath_mad.c index 1978c346b5c5..d98d5f103700 100644 --- a/drivers/infiniband/hw/ipath/ipath_mad.c +++ b/drivers/infiniband/hw/ipath/ipath_mad.c @@ -934,6 +934,7 @@ static int recv_pma_get_portsamplescontrol(struct ib_perf *pmp, struct ib_pma_portsamplescontrol *p = (struct ib_pma_portsamplescontrol *)pmp->data; struct ipath_ibdev *dev = to_idev(ibdev); + struct ipath_cregs const *crp = dev->dd->ipath_cregs; unsigned long flags; u8 port_select = p->port_select; @@ -955,7 +956,10 @@ static int recv_pma_get_portsamplescontrol(struct ib_perf *pmp, p->counter_width = 4; /* 32 bit counters */ p->counter_mask0_9 = COUNTER_MASK0_9; spin_lock_irqsave(&dev->pending_lock, flags); - p->sample_status = dev->pma_sample_status; + if (crp->cr_psstat) + p->sample_status = ipath_read_creg32(dev->dd, crp->cr_psstat); + else + p->sample_status = dev->pma_sample_status; p->sample_start = cpu_to_be32(dev->pma_sample_start); p->sample_interval = cpu_to_be32(dev->pma_sample_interval); p->tag = cpu_to_be16(dev->pma_tag); @@ -975,8 +979,9 @@ static int recv_pma_set_portsamplescontrol(struct ib_perf *pmp, struct ib_pma_portsamplescontrol *p = (struct ib_pma_portsamplescontrol *)pmp->data; struct ipath_ibdev *dev = to_idev(ibdev); + struct ipath_cregs const *crp = dev->dd->ipath_cregs; unsigned long flags; - u32 start; + u8 status; int ret; if (pmp->attr_mod != 0 || @@ -986,59 +991,67 @@ static int recv_pma_set_portsamplescontrol(struct ib_perf *pmp, goto bail; } - start = be32_to_cpu(p->sample_start); - if (start != 0) { - spin_lock_irqsave(&dev->pending_lock, flags); - if (dev->pma_sample_status == IB_PMA_SAMPLE_STATUS_DONE) { - dev->pma_sample_status = - IB_PMA_SAMPLE_STATUS_STARTED; - dev->pma_sample_start = start; - dev->pma_sample_interval = - be32_to_cpu(p->sample_interval); - dev->pma_tag = be16_to_cpu(p->tag); - if (p->counter_select[0]) - dev->pma_counter_select[0] = - p->counter_select[0]; - if (p->counter_select[1]) - dev->pma_counter_select[1] = - p->counter_select[1]; - if (p->counter_select[2]) - dev->pma_counter_select[2] = - p->counter_select[2]; - if (p->counter_select[3]) - dev->pma_counter_select[3] = - p->counter_select[3]; - if (p->counter_select[4]) - dev->pma_counter_select[4] = - p->counter_select[4]; - } - spin_unlock_irqrestore(&dev->pending_lock, flags); + spin_lock_irqsave(&dev->pending_lock, flags); + if (crp->cr_psstat) + status = ipath_read_creg32(dev->dd, crp->cr_psstat); + else + status = dev->pma_sample_status; + if (status == IB_PMA_SAMPLE_STATUS_DONE) { + dev->pma_sample_start = be32_to_cpu(p->sample_start); + dev->pma_sample_interval = be32_to_cpu(p->sample_interval); + dev->pma_tag = be16_to_cpu(p->tag); + dev->pma_counter_select[0] = p->counter_select[0]; + dev->pma_counter_select[1] = p->counter_select[1]; + dev->pma_counter_select[2] = p->counter_select[2]; + dev->pma_counter_select[3] = p->counter_select[3]; + dev->pma_counter_select[4] = p->counter_select[4]; + if (crp->cr_psstat) { + ipath_write_creg(dev->dd, crp->cr_psinterval, + dev->pma_sample_interval); + ipath_write_creg(dev->dd, crp->cr_psstart, + dev->pma_sample_start); + } else + dev->pma_sample_status = IB_PMA_SAMPLE_STATUS_STARTED; } + spin_unlock_irqrestore(&dev->pending_lock, flags); + ret = recv_pma_get_portsamplescontrol(pmp, ibdev, port); bail: return ret; } -static u64 get_counter(struct ipath_ibdev *dev, __be16 sel) +static u64 get_counter(struct ipath_ibdev *dev, + struct ipath_cregs const *crp, + __be16 sel) { u64 ret; switch (sel) { case IB_PMA_PORT_XMIT_DATA: - ret = dev->ipath_sword; + ret = (crp->cr_psxmitdatacount) ? + ipath_read_creg32(dev->dd, crp->cr_psxmitdatacount) : + dev->ipath_sword; break; case IB_PMA_PORT_RCV_DATA: - ret = dev->ipath_rword; + ret = (crp->cr_psrcvdatacount) ? + ipath_read_creg32(dev->dd, crp->cr_psrcvdatacount) : + dev->ipath_rword; break; case IB_PMA_PORT_XMIT_PKTS: - ret = dev->ipath_spkts; + ret = (crp->cr_psxmitpktscount) ? + ipath_read_creg32(dev->dd, crp->cr_psxmitpktscount) : + dev->ipath_spkts; break; case IB_PMA_PORT_RCV_PKTS: - ret = dev->ipath_rpkts; + ret = (crp->cr_psrcvpktscount) ? + ipath_read_creg32(dev->dd, crp->cr_psrcvpktscount) : + dev->ipath_rpkts; break; case IB_PMA_PORT_XMIT_WAIT: - ret = dev->ipath_xmit_wait; + ret = (crp->cr_psxmitwaitcount) ? + ipath_read_creg32(dev->dd, crp->cr_psxmitwaitcount) : + dev->ipath_xmit_wait; break; default: ret = 0; @@ -1053,14 +1066,21 @@ static int recv_pma_get_portsamplesresult(struct ib_perf *pmp, struct ib_pma_portsamplesresult *p = (struct ib_pma_portsamplesresult *)pmp->data; struct ipath_ibdev *dev = to_idev(ibdev); + struct ipath_cregs const *crp = dev->dd->ipath_cregs; + u8 status; int i; memset(pmp->data, 0, sizeof(pmp->data)); p->tag = cpu_to_be16(dev->pma_tag); - p->sample_status = cpu_to_be16(dev->pma_sample_status); + if (crp->cr_psstat) + status = ipath_read_creg32(dev->dd, crp->cr_psstat); + else + status = dev->pma_sample_status; + p->sample_status = cpu_to_be16(status); for (i = 0; i < ARRAY_SIZE(dev->pma_counter_select); i++) - p->counter[i] = cpu_to_be32( - get_counter(dev, dev->pma_counter_select[i])); + p->counter[i] = (status != IB_PMA_SAMPLE_STATUS_DONE) ? 0 : + cpu_to_be32( + get_counter(dev, crp, dev->pma_counter_select[i])); return reply((struct ib_smp *) pmp); } @@ -1071,16 +1091,23 @@ static int recv_pma_get_portsamplesresult_ext(struct ib_perf *pmp, struct ib_pma_portsamplesresult_ext *p = (struct ib_pma_portsamplesresult_ext *)pmp->data; struct ipath_ibdev *dev = to_idev(ibdev); + struct ipath_cregs const *crp = dev->dd->ipath_cregs; + u8 status; int i; memset(pmp->data, 0, sizeof(pmp->data)); p->tag = cpu_to_be16(dev->pma_tag); - p->sample_status = cpu_to_be16(dev->pma_sample_status); + if (crp->cr_psstat) + status = ipath_read_creg32(dev->dd, crp->cr_psstat); + else + status = dev->pma_sample_status; + p->sample_status = cpu_to_be16(status); /* 64 bits */ p->extended_width = __constant_cpu_to_be32(0x80000000); for (i = 0; i < ARRAY_SIZE(dev->pma_counter_select); i++) - p->counter[i] = cpu_to_be64( - get_counter(dev, dev->pma_counter_select[i])); + p->counter[i] = (status != IB_PMA_SAMPLE_STATUS_DONE) ? 0 : + cpu_to_be64( + get_counter(dev, crp, dev->pma_counter_select[i])); return reply((struct ib_smp *) pmp); } @@ -1113,6 +1140,8 @@ static int recv_pma_get_portcounters(struct ib_perf *pmp, dev->z_local_link_integrity_errors; cntrs.excessive_buffer_overrun_errors -= dev->z_excessive_buffer_overrun_errors; + cntrs.vl15_dropped -= dev->z_vl15_dropped; + cntrs.vl15_dropped += dev->n_vl15_dropped; memset(pmp->data, 0, sizeof(pmp->data)); @@ -1156,10 +1185,10 @@ static int recv_pma_get_portcounters(struct ib_perf *pmp, cntrs.excessive_buffer_overrun_errors = 0xFUL; p->lli_ebor_errors = (cntrs.local_link_integrity_errors << 4) | cntrs.excessive_buffer_overrun_errors; - if (dev->n_vl15_dropped > 0xFFFFUL) + if (cntrs.vl15_dropped > 0xFFFFUL) p->vl15_dropped = __constant_cpu_to_be16(0xFFFF); else - p->vl15_dropped = cpu_to_be16((u16)dev->n_vl15_dropped); + p->vl15_dropped = cpu_to_be16((u16)cntrs.vl15_dropped); if (cntrs.port_xmit_data > 0xFFFFFFFFUL) p->port_xmit_data = __constant_cpu_to_be32(0xFFFFFFFF); else @@ -1262,8 +1291,10 @@ static int recv_pma_set_portcounters(struct ib_perf *pmp, dev->z_excessive_buffer_overrun_errors = cntrs.excessive_buffer_overrun_errors; - if (p->counter_select & IB_PMA_SEL_PORT_VL15_DROPPED) + if (p->counter_select & IB_PMA_SEL_PORT_VL15_DROPPED) { dev->n_vl15_dropped = 0; + dev->z_vl15_dropped = cntrs.vl15_dropped; + } if (p->counter_select & IB_PMA_SEL_PORT_XMIT_DATA) dev->z_port_xmit_data = cntrs.port_xmit_data; diff --git a/drivers/infiniband/hw/ipath/ipath_registers.h b/drivers/infiniband/hw/ipath/ipath_registers.h index d7181d444ed7..156ef1473466 100644 --- a/drivers/infiniband/hw/ipath/ipath_registers.h +++ b/drivers/infiniband/hw/ipath/ipath_registers.h @@ -469,6 +469,20 @@ struct ipath_cregs { ipath_creg cr_unsupvlcnt; ipath_creg cr_wordrcvcnt; ipath_creg cr_wordsendcnt; + ipath_creg cr_vl15droppedpktcnt; + ipath_creg cr_rxotherlocalphyerrcnt; + ipath_creg cr_excessbufferovflcnt; + ipath_creg cr_locallinkintegrityerrcnt; + ipath_creg cr_rxvlerrcnt; + ipath_creg cr_rxdlidfltrcnt; + ipath_creg cr_psstat; + ipath_creg cr_psstart; + ipath_creg cr_psinterval; + ipath_creg cr_psrcvdatacount; + ipath_creg cr_psrcvpktscount; + ipath_creg cr_psxmitdatacount; + ipath_creg cr_psxmitpktscount; + ipath_creg cr_psxmitwaitcount; }; #endif /* _IPATH_REGISTERS_H */ diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c index c4c998446c7b..a2baa618daf2 100644 --- a/drivers/infiniband/hw/ipath/ipath_verbs.c +++ b/drivers/infiniband/hw/ipath/ipath_verbs.c @@ -1641,6 +1641,7 @@ int ipath_register_ib_device(struct ipath_devdata *dd) cntrs.local_link_integrity_errors; idev->z_excessive_buffer_overrun_errors = cntrs.excessive_buffer_overrun_errors; + idev->z_vl15_dropped = cntrs.vl15_dropped; /* * The system image GUID is supposed to be the same for all diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.h b/drivers/infiniband/hw/ipath/ipath_verbs.h index 6ccb54f104a3..1c8985012743 100644 --- a/drivers/infiniband/hw/ipath/ipath_verbs.h +++ b/drivers/infiniband/hw/ipath/ipath_verbs.h @@ -554,6 +554,7 @@ struct ipath_ibdev { u32 z_pkey_violations; /* starting count for PMA */ u32 z_local_link_integrity_errors; /* starting count for PMA */ u32 z_excessive_buffer_overrun_errors; /* starting count for PMA */ + u32 z_vl15_dropped; /* starting count for PMA */ u32 n_rc_resends; u32 n_rc_acks; u32 n_rc_qacks; @@ -598,6 +599,7 @@ struct ipath_verbs_counters { u64 port_rcv_packets; u32 local_link_integrity_errors; u32 excessive_buffer_overrun_errors; + u32 vl15_dropped; }; static inline struct ipath_mr *to_imr(struct ib_mr *ibmr) -- cgit v1.2.3-59-g8ed1b From 3029fcc3d44530601f19fd8f551ac195d3a918d7 Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Sun, 6 Jan 2008 21:02:34 -0800 Subject: IB/ipath: Export hardware counters more consistently Various hardware counters are exported via the ipath file system (since it is binary data). The old file format was very dependent on the HW offsets for these registers. Newer HCA chips can have different counters at different offsets. This patch adds a level of indirection to make the file format consistent across HCAs. Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_common.h | 20 +++- drivers/infiniband/hw/ipath/ipath_fs.c | 11 +- drivers/infiniband/hw/ipath/ipath_iba6110.c | 159 +++++++++++++++++++++++++++- drivers/infiniband/hw/ipath/ipath_iba6120.c | 153 +++++++++++++++++++++++++- drivers/infiniband/hw/ipath/ipath_kernel.h | 2 + 5 files changed, 328 insertions(+), 17 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_common.h b/drivers/infiniband/hw/ipath/ipath_common.h index 851df8a75e79..aa780e7f2418 100644 --- a/drivers/infiniband/hw/ipath/ipath_common.h +++ b/drivers/infiniband/hw/ipath/ipath_common.h @@ -579,7 +579,7 @@ struct ipath_flash { struct infinipath_counters { __u64 LBIntCnt; __u64 LBFlowStallCnt; - __u64 Reserved1; + __u64 TxSDmaDescCnt; /* was Reserved1 */ __u64 TxUnsupVLErrCnt; __u64 TxDataPktCnt; __u64 TxFlowPktCnt; @@ -615,12 +615,26 @@ struct infinipath_counters { __u64 RxP6HdrEgrOvflCnt; __u64 RxP7HdrEgrOvflCnt; __u64 RxP8HdrEgrOvflCnt; - __u64 Reserved6; - __u64 Reserved7; + __u64 RxP9HdrEgrOvflCnt; /* was Reserved6 */ + __u64 RxP10HdrEgrOvflCnt; /* was Reserved7 */ + __u64 RxP11HdrEgrOvflCnt; /* new for IBA7220 */ + __u64 RxP12HdrEgrOvflCnt; /* new for IBA7220 */ + __u64 RxP13HdrEgrOvflCnt; /* new for IBA7220 */ + __u64 RxP14HdrEgrOvflCnt; /* new for IBA7220 */ + __u64 RxP15HdrEgrOvflCnt; /* new for IBA7220 */ + __u64 RxP16HdrEgrOvflCnt; /* new for IBA7220 */ __u64 IBStatusChangeCnt; __u64 IBLinkErrRecoveryCnt; __u64 IBLinkDownedCnt; __u64 IBSymbolErrCnt; + /* The following are new for IBA7220 */ + __u64 RxVL15DroppedPktCnt; + __u64 RxOtherLocalPhyErrCnt; + __u64 PcieRetryBufDiagQwordCnt; + __u64 ExcessBufferOvflCnt; + __u64 LocalLinkIntegrityErrCnt; + __u64 RxVlErrCnt; + __u64 RxDlidFltrCnt; }; /* diff --git a/drivers/infiniband/hw/ipath/ipath_fs.c b/drivers/infiniband/hw/ipath/ipath_fs.c index 262c25db05cd..52325e009a1f 100644 --- a/drivers/infiniband/hw/ipath/ipath_fs.c +++ b/drivers/infiniband/hw/ipath/ipath_fs.c @@ -108,21 +108,16 @@ static const struct file_operations atomic_stats_ops = { .read = atomic_stats_read, }; -#define NUM_COUNTERS sizeof(struct infinipath_counters) / sizeof(u64) - static ssize_t atomic_counters_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { - u64 counters[NUM_COUNTERS]; - u16 i; + struct infinipath_counters counters; struct ipath_devdata *dd; dd = file->f_path.dentry->d_inode->i_private; + dd->ipath_f_read_counters(dd, &counters); - for (i = 0; i < NUM_COUNTERS; i++) - counters[i] = ipath_snap_cntr(dd, i); - - return simple_read_from_buffer(buf, count, ppos, counters, + return simple_read_from_buffer(buf, count, ppos, &counters, sizeof counters); } diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c index c272a7392e22..ce858797e299 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6110.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c @@ -148,10 +148,57 @@ struct _infinipath_do_not_use_kernel_regs { unsigned long long ReservedSW2[4]; }; -#define IPATH_KREG_OFFSET(field) (offsetof(struct \ - _infinipath_do_not_use_kernel_regs, field) / sizeof(u64)) +struct _infinipath_do_not_use_counters { + __u64 LBIntCnt; + __u64 LBFlowStallCnt; + __u64 Reserved1; + __u64 TxUnsupVLErrCnt; + __u64 TxDataPktCnt; + __u64 TxFlowPktCnt; + __u64 TxDwordCnt; + __u64 TxLenErrCnt; + __u64 TxMaxMinLenErrCnt; + __u64 TxUnderrunCnt; + __u64 TxFlowStallCnt; + __u64 TxDroppedPktCnt; + __u64 RxDroppedPktCnt; + __u64 RxDataPktCnt; + __u64 RxFlowPktCnt; + __u64 RxDwordCnt; + __u64 RxLenErrCnt; + __u64 RxMaxMinLenErrCnt; + __u64 RxICRCErrCnt; + __u64 RxVCRCErrCnt; + __u64 RxFlowCtrlErrCnt; + __u64 RxBadFormatCnt; + __u64 RxLinkProblemCnt; + __u64 RxEBPCnt; + __u64 RxLPCRCErrCnt; + __u64 RxBufOvflCnt; + __u64 RxTIDFullErrCnt; + __u64 RxTIDValidErrCnt; + __u64 RxPKeyMismatchCnt; + __u64 RxP0HdrEgrOvflCnt; + __u64 RxP1HdrEgrOvflCnt; + __u64 RxP2HdrEgrOvflCnt; + __u64 RxP3HdrEgrOvflCnt; + __u64 RxP4HdrEgrOvflCnt; + __u64 RxP5HdrEgrOvflCnt; + __u64 RxP6HdrEgrOvflCnt; + __u64 RxP7HdrEgrOvflCnt; + __u64 RxP8HdrEgrOvflCnt; + __u64 Reserved6; + __u64 Reserved7; + __u64 IBStatusChangeCnt; + __u64 IBLinkErrRecoveryCnt; + __u64 IBLinkDownedCnt; + __u64 IBSymbolErrCnt; +}; + +#define IPATH_KREG_OFFSET(field) (offsetof( \ + struct _infinipath_do_not_use_kernel_regs, field) / sizeof(u64)) #define IPATH_CREG_OFFSET(field) (offsetof( \ - struct infinipath_counters, field) / sizeof(u64)) + struct _infinipath_do_not_use_counters, field) / sizeof(u64)) static const struct ipath_kregs ipath_ht_kregs = { .kr_control = IPATH_KREG_OFFSET(Control), @@ -1614,6 +1661,111 @@ static void ipath_ht_free_irq(struct ipath_devdata *dd) dd->ipath_intconfig = 0; } +static void ipath_ht_read_counters(struct ipath_devdata *dd, + struct infinipath_counters *cntrs) +{ + cntrs->LBIntCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(LBIntCnt)); + cntrs->LBFlowStallCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(LBFlowStallCnt)); + cntrs->TxSDmaDescCnt = 0; + cntrs->TxUnsupVLErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxUnsupVLErrCnt)); + cntrs->TxDataPktCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxDataPktCnt)); + cntrs->TxFlowPktCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxFlowPktCnt)); + cntrs->TxDwordCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxDwordCnt)); + cntrs->TxLenErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxLenErrCnt)); + cntrs->TxMaxMinLenErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxMaxMinLenErrCnt)); + cntrs->TxUnderrunCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxUnderrunCnt)); + cntrs->TxFlowStallCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxFlowStallCnt)); + cntrs->TxDroppedPktCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxDroppedPktCnt)); + cntrs->RxDroppedPktCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxDroppedPktCnt)); + cntrs->RxDataPktCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxDataPktCnt)); + cntrs->RxFlowPktCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxFlowPktCnt)); + cntrs->RxDwordCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxDwordCnt)); + cntrs->RxLenErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxLenErrCnt)); + cntrs->RxMaxMinLenErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxMaxMinLenErrCnt)); + cntrs->RxICRCErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxICRCErrCnt)); + cntrs->RxVCRCErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxVCRCErrCnt)); + cntrs->RxFlowCtrlErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxFlowCtrlErrCnt)); + cntrs->RxBadFormatCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxBadFormatCnt)); + cntrs->RxLinkProblemCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxLinkProblemCnt)); + cntrs->RxEBPCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxEBPCnt)); + cntrs->RxLPCRCErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxLPCRCErrCnt)); + cntrs->RxBufOvflCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxBufOvflCnt)); + cntrs->RxTIDFullErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxTIDFullErrCnt)); + cntrs->RxTIDValidErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxTIDValidErrCnt)); + cntrs->RxPKeyMismatchCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxPKeyMismatchCnt)); + cntrs->RxP0HdrEgrOvflCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP0HdrEgrOvflCnt)); + cntrs->RxP1HdrEgrOvflCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP1HdrEgrOvflCnt)); + cntrs->RxP2HdrEgrOvflCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP2HdrEgrOvflCnt)); + cntrs->RxP3HdrEgrOvflCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP3HdrEgrOvflCnt)); + cntrs->RxP4HdrEgrOvflCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP4HdrEgrOvflCnt)); + cntrs->RxP5HdrEgrOvflCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP5HdrEgrOvflCnt)); + cntrs->RxP6HdrEgrOvflCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP6HdrEgrOvflCnt)); + cntrs->RxP7HdrEgrOvflCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP7HdrEgrOvflCnt)); + cntrs->RxP8HdrEgrOvflCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP8HdrEgrOvflCnt)); + cntrs->RxP9HdrEgrOvflCnt = 0; + cntrs->RxP10HdrEgrOvflCnt = 0; + cntrs->RxP11HdrEgrOvflCnt = 0; + cntrs->RxP12HdrEgrOvflCnt = 0; + cntrs->RxP13HdrEgrOvflCnt = 0; + cntrs->RxP14HdrEgrOvflCnt = 0; + cntrs->RxP15HdrEgrOvflCnt = 0; + cntrs->RxP16HdrEgrOvflCnt = 0; + cntrs->IBStatusChangeCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBStatusChangeCnt)); + cntrs->IBLinkErrRecoveryCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBLinkErrRecoveryCnt)); + cntrs->IBLinkDownedCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBLinkDownedCnt)); + cntrs->IBSymbolErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBSymbolErrCnt)); + cntrs->RxVL15DroppedPktCnt = 0; + cntrs->RxOtherLocalPhyErrCnt = 0; + cntrs->PcieRetryBufDiagQwordCnt = 0; + cntrs->ExcessBufferOvflCnt = dd->ipath_overrun_thresh_errs; + cntrs->LocalLinkIntegrityErrCnt = + (dd->ipath_flags & IPATH_GPIO_ERRINTRS) ? + dd->ipath_lli_errs : dd->ipath_lli_errors; + cntrs->RxVlErrCnt = 0; + cntrs->RxDlidFltrCnt = 0; +} + /** * ipath_init_iba6110_funcs - set up the chip-specific function pointers * @dd: the infinipath device @@ -1638,6 +1790,7 @@ void ipath_init_iba6110_funcs(struct ipath_devdata *dd) dd->ipath_f_setextled = ipath_setup_ht_setextled; dd->ipath_f_get_base_info = ipath_ht_get_base_info; dd->ipath_f_free_irq = ipath_ht_free_irq; + dd->ipath_f_read_counters = ipath_ht_read_counters; /* * initialize chip-specific variables diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c index e6893ebc59d4..97ae11793973 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6120.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c @@ -145,10 +145,57 @@ struct _infinipath_do_not_use_kernel_regs { unsigned long long Reserved12; }; -#define IPATH_KREG_OFFSET(field) (offsetof(struct \ - _infinipath_do_not_use_kernel_regs, field) / sizeof(u64)) +struct _infinipath_do_not_use_counters { + __u64 LBIntCnt; + __u64 LBFlowStallCnt; + __u64 Reserved1; + __u64 TxUnsupVLErrCnt; + __u64 TxDataPktCnt; + __u64 TxFlowPktCnt; + __u64 TxDwordCnt; + __u64 TxLenErrCnt; + __u64 TxMaxMinLenErrCnt; + __u64 TxUnderrunCnt; + __u64 TxFlowStallCnt; + __u64 TxDroppedPktCnt; + __u64 RxDroppedPktCnt; + __u64 RxDataPktCnt; + __u64 RxFlowPktCnt; + __u64 RxDwordCnt; + __u64 RxLenErrCnt; + __u64 RxMaxMinLenErrCnt; + __u64 RxICRCErrCnt; + __u64 RxVCRCErrCnt; + __u64 RxFlowCtrlErrCnt; + __u64 RxBadFormatCnt; + __u64 RxLinkProblemCnt; + __u64 RxEBPCnt; + __u64 RxLPCRCErrCnt; + __u64 RxBufOvflCnt; + __u64 RxTIDFullErrCnt; + __u64 RxTIDValidErrCnt; + __u64 RxPKeyMismatchCnt; + __u64 RxP0HdrEgrOvflCnt; + __u64 RxP1HdrEgrOvflCnt; + __u64 RxP2HdrEgrOvflCnt; + __u64 RxP3HdrEgrOvflCnt; + __u64 RxP4HdrEgrOvflCnt; + __u64 RxP5HdrEgrOvflCnt; + __u64 RxP6HdrEgrOvflCnt; + __u64 RxP7HdrEgrOvflCnt; + __u64 RxP8HdrEgrOvflCnt; + __u64 Reserved6; + __u64 Reserved7; + __u64 IBStatusChangeCnt; + __u64 IBLinkErrRecoveryCnt; + __u64 IBLinkDownedCnt; + __u64 IBSymbolErrCnt; +}; + +#define IPATH_KREG_OFFSET(field) (offsetof( \ + struct _infinipath_do_not_use_kernel_regs, field) / sizeof(u64)) #define IPATH_CREG_OFFSET(field) (offsetof( \ - struct infinipath_counters, field) / sizeof(u64)) + struct _infinipath_do_not_use_counters, field) / sizeof(u64)) static const struct ipath_kregs ipath_pe_kregs = { .kr_control = IPATH_KREG_OFFSET(Control), @@ -1368,6 +1415,105 @@ static void ipath_pe_free_irq(struct ipath_devdata *dd) dd->ipath_irq = 0; } +static void ipath_pe_read_counters(struct ipath_devdata *dd, + struct infinipath_counters *cntrs) +{ + cntrs->LBIntCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(LBIntCnt)); + cntrs->LBFlowStallCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(LBFlowStallCnt)); + cntrs->TxSDmaDescCnt = 0; + cntrs->TxUnsupVLErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxUnsupVLErrCnt)); + cntrs->TxDataPktCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxDataPktCnt)); + cntrs->TxFlowPktCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxFlowPktCnt)); + cntrs->TxDwordCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxDwordCnt)); + cntrs->TxLenErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxLenErrCnt)); + cntrs->TxMaxMinLenErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxMaxMinLenErrCnt)); + cntrs->TxUnderrunCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxUnderrunCnt)); + cntrs->TxFlowStallCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxFlowStallCnt)); + cntrs->TxDroppedPktCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxDroppedPktCnt)); + cntrs->RxDroppedPktCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxDroppedPktCnt)); + cntrs->RxDataPktCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxDataPktCnt)); + cntrs->RxFlowPktCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxFlowPktCnt)); + cntrs->RxDwordCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxDwordCnt)); + cntrs->RxLenErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxLenErrCnt)); + cntrs->RxMaxMinLenErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxMaxMinLenErrCnt)); + cntrs->RxICRCErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxICRCErrCnt)); + cntrs->RxVCRCErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxVCRCErrCnt)); + cntrs->RxFlowCtrlErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxFlowCtrlErrCnt)); + cntrs->RxBadFormatCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxBadFormatCnt)); + cntrs->RxLinkProblemCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxLinkProblemCnt)); + cntrs->RxEBPCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxEBPCnt)); + cntrs->RxLPCRCErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxLPCRCErrCnt)); + cntrs->RxBufOvflCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxBufOvflCnt)); + cntrs->RxTIDFullErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxTIDFullErrCnt)); + cntrs->RxTIDValidErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxTIDValidErrCnt)); + cntrs->RxPKeyMismatchCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxPKeyMismatchCnt)); + cntrs->RxP0HdrEgrOvflCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP0HdrEgrOvflCnt)); + cntrs->RxP1HdrEgrOvflCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP1HdrEgrOvflCnt)); + cntrs->RxP2HdrEgrOvflCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP2HdrEgrOvflCnt)); + cntrs->RxP3HdrEgrOvflCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP3HdrEgrOvflCnt)); + cntrs->RxP4HdrEgrOvflCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP4HdrEgrOvflCnt)); + cntrs->RxP5HdrEgrOvflCnt = 0; + cntrs->RxP6HdrEgrOvflCnt = 0; + cntrs->RxP7HdrEgrOvflCnt = 0; + cntrs->RxP8HdrEgrOvflCnt = 0; + cntrs->RxP9HdrEgrOvflCnt = 0; + cntrs->RxP10HdrEgrOvflCnt = 0; + cntrs->RxP11HdrEgrOvflCnt = 0; + cntrs->RxP12HdrEgrOvflCnt = 0; + cntrs->RxP13HdrEgrOvflCnt = 0; + cntrs->RxP14HdrEgrOvflCnt = 0; + cntrs->RxP15HdrEgrOvflCnt = 0; + cntrs->RxP16HdrEgrOvflCnt = 0; + cntrs->IBStatusChangeCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBStatusChangeCnt)); + cntrs->IBLinkErrRecoveryCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBLinkErrRecoveryCnt)); + cntrs->IBLinkDownedCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBLinkDownedCnt)); + cntrs->IBSymbolErrCnt = + ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBSymbolErrCnt)); + cntrs->RxVL15DroppedPktCnt = 0; + cntrs->RxOtherLocalPhyErrCnt = 0; + cntrs->PcieRetryBufDiagQwordCnt = 0; + cntrs->ExcessBufferOvflCnt = dd->ipath_overrun_thresh_errs; + cntrs->LocalLinkIntegrityErrCnt = dd->ipath_lli_errs; + cntrs->RxVlErrCnt = 0; + cntrs->RxDlidFltrCnt = 0; +} + /* * On platforms using this chip, and not having ordered WC stores, we * can get TXE parity errors due to speculative reads to the PIO buffers, @@ -1427,6 +1573,7 @@ void ipath_init_iba6120_funcs(struct ipath_devdata *dd) /* initialize chip-specific variables */ dd->ipath_f_tidtemplate = ipath_pe_tidtemplate; + dd->ipath_f_read_counters = ipath_pe_read_counters; /* * setup the register offsets, since they are different for each diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h index a59c06943de6..4f7bc08796bc 100644 --- a/drivers/infiniband/hw/ipath/ipath_kernel.h +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -253,6 +253,8 @@ struct ipath_devdata { int (*ipath_f_get_base_info)(struct ipath_portdata *, void *); /* free irq */ void (*ipath_f_free_irq)(struct ipath_devdata *); + void (*ipath_f_read_counters)(struct ipath_devdata *, + struct infinipath_counters *); struct ipath_ibdev *verbs_dev; struct timer_list verbs_timer; /* total dwords sent (summed from counter) */ -- cgit v1.2.3-59-g8ed1b From 9e2ef36b5a83b3c8ec1153382559dff410cc4341 Mon Sep 17 00:00:00 2001 From: Dave Olson Date: Sun, 6 Jan 2008 21:02:34 -0800 Subject: IB/ipath: Clean up some comments Signed-off-by: Dave Olson Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_driver.c | 2 +- drivers/infiniband/hw/ipath/ipath_file_ops.c | 5 ----- drivers/infiniband/hw/ipath/ipath_iba6110.c | 3 ++- drivers/infiniband/hw/ipath/ipath_iba6120.c | 2 +- drivers/infiniband/hw/ipath/ipath_keys.c | 5 ++--- drivers/infiniband/hw/ipath/ipath_verbs.c | 7 +++++-- 6 files changed, 11 insertions(+), 13 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c index 7c69090f6bd6..f130652cfaa3 100644 --- a/drivers/infiniband/hw/ipath/ipath_driver.c +++ b/drivers/infiniband/hw/ipath/ipath_driver.c @@ -1196,7 +1196,7 @@ reloop: be32_to_cpu(hdr->bth[0]) & 0xff); else { /* - * error packet, type of error unknown. + * error packet, type of error unknown. * Probably type 3, but we don't know, so don't * even try to print the opcode, etc. */ diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c index 2a75faf1d108..9e5714d68ee1 100644 --- a/drivers/infiniband/hw/ipath/ipath_file_ops.c +++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c @@ -1050,11 +1050,6 @@ static int mmap_piobufs(struct vm_area_struct *vma, phys = dd->ipath_physaddr + piobufs; - /* - * Don't mark this as non-cached, or we don't get the - * write combining behavior we want on the PIO buffers! - */ - #if defined(__powerpc__) /* There isn't a generic way to specify writethrough mappings */ pgprot_val(vma->vm_page_prot) |= _PAGE_NO_CACHE; diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c index ce858797e299..dffb6826579a 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6110.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c @@ -1022,7 +1022,8 @@ static int ipath_setup_ht_config(struct ipath_devdata *dd, do { u8 cap_type; - /* the HT capability type byte is 3 bytes after the + /* + * The HT capability type byte is 3 bytes after the * capability byte. */ if (pci_read_config_byte(pdev, pos + 3, &cap_type)) { diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c index 97ae11793973..66925b255ccd 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6120.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c @@ -535,7 +535,7 @@ static void ipath_pe_handle_hwerrors(struct ipath_devdata *dd, char *msg, if (hwerrs & INFINIPATH_HWE_SERDESPLLFAILED) { /* - * If it occurs, it is left masked since the eternal + * If it occurs, it is left masked since the external * interface is unused */ dd->ipath_hwerrmask &= ~INFINIPATH_HWE_SERDESPLLFAILED; diff --git a/drivers/infiniband/hw/ipath/ipath_keys.c b/drivers/infiniband/hw/ipath/ipath_keys.c index 85a4aefc6c03..8f32b17a5eed 100644 --- a/drivers/infiniband/hw/ipath/ipath_keys.c +++ b/drivers/infiniband/hw/ipath/ipath_keys.c @@ -128,9 +128,8 @@ int ipath_lkey_ok(struct ipath_qp *qp, struct ipath_sge *isge, int ret; /* - * We use LKEY == zero to mean a physical kmalloc() address. - * This is a bit of a hack since we rely on dma_map_single() - * being reversible by calling bus_to_virt(). + * We use LKEY == zero for kernel virtual addresses + * (see ipath_get_dma_mr and ipath_dma.c). */ if (sge->lkey == 0) { struct ipath_pd *pd = to_ipd(qp->ibqp.pd); diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c index a2baa618daf2..904ff1571ba6 100644 --- a/drivers/infiniband/hw/ipath/ipath_verbs.c +++ b/drivers/infiniband/hw/ipath/ipath_verbs.c @@ -943,7 +943,7 @@ bail: * ipath_verbs_send - send a packet * @qp: the QP to send on * @hdr: the packet header - * @hdrwords: the number of words in the header + * @hdrwords: the number of 32-bit words in the header * @ss: the SGE to send * @len: the length of the packet in bytes */ @@ -955,7 +955,10 @@ int ipath_verbs_send(struct ipath_qp *qp, struct ipath_ib_header *hdr, int ret; u32 dwords = (len + 3) >> 2; - /* +1 is for the qword padding of pbc */ + /* + * Calculate the send buffer trigger address. + * The +1 counts for the pbc control dword following the pbc length. + */ plen = hdrwords + dwords + 1; /* Drop non-VL15 packets if we are not in the active state */ -- cgit v1.2.3-59-g8ed1b From a18e26ae442001de62f6b84a923e8613347dc35f Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Sun, 6 Jan 2008 21:02:34 -0800 Subject: IB/ipath: Allow more flexible user register alignments User registers have different alignments on different chips (4KB on older, 64KB on 7220). Allow mapping the user registers on kernels with page sizes up to 64K. Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_file_ops.c | 6 +++--- drivers/infiniband/hw/ipath/ipath_iba6110.c | 7 +++++++ drivers/infiniband/hw/ipath/ipath_iba6120.c | 8 ++++++++ drivers/infiniband/hw/ipath/ipath_kernel.h | 6 ++++-- 4 files changed, 22 insertions(+), 5 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c index 9e5714d68ee1..0b877ed76712 100644 --- a/drivers/infiniband/hw/ipath/ipath_file_ops.c +++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c @@ -169,7 +169,7 @@ static int ipath_get_base_info(struct file *fp, kinfo->spi_piocnt = dd->ipath_pbufsport; kinfo->spi_piobufbase = (u64) pd->port_piobufs; kinfo->__spi_uregbase = (u64) dd->ipath_uregbase + - dd->ipath_palign * pd->port_port; + dd->ipath_ureg_align * pd->port_port; } else if (master) { kinfo->spi_piocnt = (dd->ipath_pbufsport / subport_cnt) + (dd->ipath_pbufsport % subport_cnt); @@ -186,7 +186,7 @@ static int ipath_get_base_info(struct file *fp, } if (shared) { kinfo->spi_port_uregbase = (u64) dd->ipath_uregbase + - dd->ipath_palign * pd->port_port; + dd->ipath_ureg_align * pd->port_port; kinfo->spi_port_rcvegrbuf = kinfo->spi_rcv_egrbufs; kinfo->spi_port_rcvhdr_base = kinfo->spi_rcvhdr_base; kinfo->spi_port_rcvhdr_tailaddr = kinfo->spi_rcvhdr_tailaddr; @@ -1271,7 +1271,7 @@ static int ipath_mmap(struct file *fp, struct vm_area_struct *vma) goto bail; } - ureg = dd->ipath_uregbase + dd->ipath_palign * pd->port_port; + ureg = dd->ipath_uregbase + dd->ipath_ureg_align * pd->port_port; if (!pd->port_subport_cnt) { /* port is not shared */ piocnt = dd->ipath_pbufsport; diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c index dffb6826579a..5ecf65b8f85a 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6110.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c @@ -739,6 +739,13 @@ static int ipath_ht_boardname(struct ipath_devdata *dd, char *name, dd->ipath_htspeed); ret = 0; + /* + * set here, not in ipath_init_*_funcs because we have to do + * it after we can read chip registers. + */ + dd->ipath_ureg_align = + ipath_read_kreg32(dd, dd->ipath_kregs->kr_pagealign); + bail: return ret; } diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c index 66925b255ccd..23de8da0f16b 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6120.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c @@ -613,6 +613,14 @@ static int ipath_pe_boardname(struct ipath_devdata *dd, char *name, dd->ipath_f_put_tid = ipath_pe_put_tid_2; } + + /* + * set here, not in ipath_init_*_funcs because we have to do + * it after we can read chip registers. + */ + dd->ipath_ureg_align = + ipath_read_kreg32(dd, dd->ipath_kregs->kr_pagealign); + return ret; } diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h index 4f7bc08796bc..08272bef2475 100644 --- a/drivers/infiniband/hw/ipath/ipath_kernel.h +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -395,6 +395,8 @@ struct ipath_devdata { void *ipath_dummy_hdrq; /* used after port close */ dma_addr_t ipath_dummy_hdrq_phys; + unsigned long ipath_ureg_align; /* user register alignment */ + /* * Shadow copies of registers; size indicates read access size. * Most of them are readonly, but some are write-only register, @@ -865,7 +867,7 @@ static inline u32 ipath_read_ureg32(const struct ipath_devdata *dd, return readl(regno + (u64 __iomem *) (dd->ipath_uregbase + (char __iomem *)dd->ipath_kregbase + - dd->ipath_palign * port)); + dd->ipath_ureg_align * port)); } /** @@ -882,7 +884,7 @@ static inline void ipath_write_ureg(const struct ipath_devdata *dd, { u64 __iomem *ubase = (u64 __iomem *) (dd->ipath_uregbase + (char __iomem *) dd->ipath_kregbase + - dd->ipath_palign * port); + dd->ipath_ureg_align * port); if (dd->ipath_kregbase) writeq(value, &ubase[regno]); } -- cgit v1.2.3-59-g8ed1b From 60948a415859cb859e24f0dfe739069d66577466 Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Sun, 6 Jan 2008 21:02:34 -0800 Subject: IB/ipath: Port config has on-chip effects for 7220 The number of configured ports for the 7220 changes the number of eager TIDs available per port, for all but port 0 (kernel port) which remains constant, so add a field to give port0 count separate from the portdata structure. Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_file_ops.c | 2 +- drivers/infiniband/hw/ipath/ipath_iba6110.c | 9 +++++++++ drivers/infiniband/hw/ipath/ipath_iba6120.c | 9 +++++++++ drivers/infiniband/hw/ipath/ipath_init_chip.c | 5 ++--- drivers/infiniband/hw/ipath/ipath_kernel.h | 3 +++ 5 files changed, 24 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c index 0b877ed76712..7b2f59af9c91 100644 --- a/drivers/infiniband/hw/ipath/ipath_file_ops.c +++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c @@ -882,7 +882,7 @@ static int ipath_create_user_egr(struct ipath_portdata *pd) egrcnt = dd->ipath_rcvegrcnt; /* TID number offset for this port */ - egroff = pd->port_port * egrcnt; + egroff = (pd->port_port - 1) * egrcnt + dd->ipath_p0_rcvegrcnt; egrsize = dd->ipath_rcvegrbufsize; ipath_cdbg(VERBOSE, "Allocating %d egr buffers, at egrtid " "offset %x, egrsize %u\n", egrcnt, egroff, egrsize); diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c index 5ecf65b8f85a..0c900c51e538 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6110.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c @@ -1669,6 +1669,14 @@ static void ipath_ht_free_irq(struct ipath_devdata *dd) dd->ipath_intconfig = 0; } +static void ipath_ht_config_ports(struct ipath_devdata *dd, ushort cfgports) +{ + dd->ipath_portcnt = + ipath_read_kreg32(dd, dd->ipath_kregs->kr_portcnt); + dd->ipath_p0_rcvegrcnt = + ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrcnt); +} + static void ipath_ht_read_counters(struct ipath_devdata *dd, struct infinipath_counters *cntrs) { @@ -1798,6 +1806,7 @@ void ipath_init_iba6110_funcs(struct ipath_devdata *dd) dd->ipath_f_setextled = ipath_setup_ht_setextled; dd->ipath_f_get_base_info = ipath_ht_get_base_info; dd->ipath_f_free_irq = ipath_ht_free_irq; + dd->ipath_f_config_ports = ipath_ht_config_ports; dd->ipath_f_read_counters = ipath_ht_read_counters; /* diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c index 23de8da0f16b..066a8ea4b4df 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6120.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c @@ -1423,6 +1423,14 @@ static void ipath_pe_free_irq(struct ipath_devdata *dd) dd->ipath_irq = 0; } +static void ipath_pe_config_ports(struct ipath_devdata *dd, ushort cfgports) +{ + dd->ipath_portcnt = + ipath_read_kreg32(dd, dd->ipath_kregs->kr_portcnt); + dd->ipath_p0_rcvegrcnt = + ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrcnt); +} + static void ipath_pe_read_counters(struct ipath_devdata *dd, struct infinipath_counters *cntrs) { @@ -1581,6 +1589,7 @@ void ipath_init_iba6120_funcs(struct ipath_devdata *dd) /* initialize chip-specific variables */ dd->ipath_f_tidtemplate = ipath_pe_tidtemplate; + dd->ipath_f_config_ports = ipath_pe_config_ports; dd->ipath_f_read_counters = ipath_pe_read_counters; /* diff --git a/drivers/infiniband/hw/ipath/ipath_init_chip.c b/drivers/infiniband/hw/ipath/ipath_init_chip.c index 98b51465b58d..3174c315999b 100644 --- a/drivers/infiniband/hw/ipath/ipath_init_chip.c +++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c @@ -91,7 +91,7 @@ static int create_port0_egr(struct ipath_devdata *dd) struct ipath_skbinfo *skbinfo; int ret; - egrcnt = dd->ipath_rcvegrcnt; + egrcnt = dd->ipath_p0_rcvegrcnt; skbinfo = vmalloc(sizeof(*dd->ipath_port0_skbinfo) * egrcnt); if (skbinfo == NULL) { @@ -244,8 +244,7 @@ static int init_chip_first(struct ipath_devdata *dd, * cfgports. We do still check and report a difference, if * not same (should be impossible). */ - dd->ipath_portcnt = - ipath_read_kreg32(dd, dd->ipath_kregs->kr_portcnt); + dd->ipath_f_config_ports(dd, ipath_cfgports); if (!ipath_cfgports) dd->ipath_cfgports = dd->ipath_portcnt; else if (ipath_cfgports <= dd->ipath_portcnt) { diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h index 08272bef2475..b9cca8403239 100644 --- a/drivers/infiniband/hw/ipath/ipath_kernel.h +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -253,6 +253,7 @@ struct ipath_devdata { int (*ipath_f_get_base_info)(struct ipath_portdata *, void *); /* free irq */ void (*ipath_f_free_irq)(struct ipath_devdata *); + void (*ipath_f_config_ports)(struct ipath_devdata *, ushort); void (*ipath_f_read_counters)(struct ipath_devdata *, struct infinipath_counters *); struct ipath_ibdev *verbs_dev; @@ -326,6 +327,8 @@ struct ipath_devdata { u32 ipath_cfgports; /* count of port 0 hdrqfull errors */ u32 ipath_p0_hdrqfull; + /* port 0 number of receive eager buffers */ + u32 ipath_p0_rcvegrcnt; /* * index of last piobuffer we used. Speeds up searching, by -- cgit v1.2.3-59-g8ed1b From 4ea61b548bc93fb87cec6f52059851076e2ff54d Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Sun, 6 Jan 2008 21:12:38 -0800 Subject: IB/ipath: Add flag and handling for chips with swapped register bug The 6110 had a bug that caused some registers to be swapped; it was fixed for the 7220 (and didn't affect the 6120 because it had fewer registers). This adds a flag and related code to handle that, and includes some minor cleanups in the same area. Signed-off-by: Ralph Campbell --- drivers/infiniband/hw/ipath/ipath_driver.c | 11 +++-------- drivers/infiniband/hw/ipath/ipath_iba6110.c | 2 ++ drivers/infiniband/hw/ipath/ipath_init_chip.c | 8 ++------ drivers/infiniband/hw/ipath/ipath_intr.c | 4 ++-- drivers/infiniband/hw/ipath/ipath_kernel.h | 1 + 5 files changed, 10 insertions(+), 16 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c index f130652cfaa3..5a9dc317f40a 100644 --- a/drivers/infiniband/hw/ipath/ipath_driver.c +++ b/drivers/infiniband/hw/ipath/ipath_driver.c @@ -1340,14 +1340,9 @@ static void ipath_update_pio_bufs(struct ipath_devdata *dd) /* * Chip Errata: bug 6641; even and odd qwords>3 are swapped */ - if (i > 3) { - if (i & 1) - piov = le64_to_cpu( - dd->ipath_pioavailregs_dma[i - 1]); - else - piov = le64_to_cpu( - dd->ipath_pioavailregs_dma[i + 1]); - } else + if (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS)) + piov = le64_to_cpu(dd->ipath_pioavailregs_dma[i ^ 1]); + else piov = le64_to_cpu(dd->ipath_pioavailregs_dma[i]); pchg = _IPATH_ALL_CHECKBITS & ~(dd->ipath_pioavailshadow[i] ^ piov); diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c index 0c900c51e538..3bfaf04a2148 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6110.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c @@ -1043,6 +1043,8 @@ static int ipath_setup_ht_config(struct ipath_devdata *dd, } while ((pos = pci_find_next_capability(pdev, pos, PCI_CAP_ID_HT))); + dd->ipath_flags |= IPATH_SWAP_PIOBUFS; + bail: return ret; } diff --git a/drivers/infiniband/hw/ipath/ipath_init_chip.c b/drivers/infiniband/hw/ipath/ipath_init_chip.c index 3174c315999b..4471674975cd 100644 --- a/drivers/infiniband/hw/ipath/ipath_init_chip.c +++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c @@ -528,12 +528,8 @@ static void enable_chip(struct ipath_devdata *dd, /* * Chip Errata bug 6641; even and odd qwords>3 are swapped. */ - if (i > 3) { - if (i & 1) - val = dd->ipath_pioavailregs_dma[i - 1]; - else - val = dd->ipath_pioavailregs_dma[i + 1]; - } + if (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS)) + val = dd->ipath_pioavailregs_dma[i ^ 1]; else val = dd->ipath_pioavailregs_dma[i]; dd->ipath_pioavailshadow[i] = le64_to_cpu(val); diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c index e2ce5314504d..ddc0a19c5eee 100644 --- a/drivers/infiniband/hw/ipath/ipath_intr.c +++ b/drivers/infiniband/hw/ipath/ipath_intr.c @@ -831,8 +831,8 @@ void ipath_clear_freeze(struct ipath_devdata *dd) */ for (i = 0; i < dd->ipath_pioavregs; i++) { /* deal with 6110 chip bug */ - im = i > 3 ? ((i&1) ? i-1 : i+1) : i; - val = ipath_read_kreg64(dd, (0x1000/sizeof(u64))+im); + im = i > 3 ? i ^ 1 : i; + val = ipath_read_kreg64(dd, (0x1000 / sizeof(u64)) + im); dd->ipath_pioavailregs_dma[i] = dd->ipath_pioavailshadow[i] = le64_to_cpu(val); } diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h index b9cca8403239..e07df0068312 100644 --- a/drivers/infiniband/hw/ipath/ipath_kernel.h +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -756,6 +756,7 @@ int ipath_set_rx_pol_inv(struct ipath_devdata *dd, u8 new_pol_inv); #define IPATH_DISABLED 0x80000 /* administratively disabled */ /* Use GPIO interrupts for new counters */ #define IPATH_GPIO_ERRINTRS 0x100000 +#define IPATH_SWAP_PIOBUFS 0x200000 /* Bits in GPIO for the added interrupts */ #define IPATH_GPIO_PORT0_BIT 2 -- cgit v1.2.3-59-g8ed1b From 7da0498e7f0eb022107811b9d41697298329f6b4 Mon Sep 17 00:00:00 2001 From: Arthur Jones Date: Sun, 6 Jan 2008 21:12:38 -0800 Subject: IB/ipath: Add ipath_read_ireg() abstraction Different chips have different width interrupt status registers, so add a flag and accessor function to decide which width register read to use. Signed-off-by: Arthur Jones Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_intr.c | 4 ++-- drivers/infiniband/hw/ipath/ipath_kernel.h | 8 ++++++++ 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c index ddc0a19c5eee..92e58c921522 100644 --- a/drivers/infiniband/hw/ipath/ipath_intr.c +++ b/drivers/infiniband/hw/ipath/ipath_intr.c @@ -883,7 +883,7 @@ static noinline void ipath_bad_intr(struct ipath_devdata *dd, u32 *unexpectp) dd->ipath_f_free_irq(dd); } } - if (ipath_read_kreg32(dd, dd->ipath_kregs->kr_intmask)) { + if (ipath_read_ireg(dd, dd->ipath_kregs->kr_intmask)) { ipath_dev_err(dd, "%u unexpected interrupts, " "disabling interrupts completely\n", *unexpectp); @@ -1034,7 +1034,7 @@ irqreturn_t ipath_intr(int irq, void *data) goto bail; } - istat = ipath_read_kreg32(dd, dd->ipath_kregs->kr_intstatus); + istat = ipath_read_ireg(dd, dd->ipath_kregs->kr_intstatus); if (unlikely(!istat)) { ipath_stats.sps_nullintr++; diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h index e07df0068312..c47290422457 100644 --- a/drivers/infiniband/hw/ipath/ipath_kernel.h +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -753,6 +753,8 @@ int ipath_set_rx_pol_inv(struct ipath_devdata *dd, u8 new_pol_inv); * are 64bit */ #define IPATH_32BITCOUNTERS 0x20000 /* can miss port0 rx interrupts */ + /* Interrupt register is 64 bits */ +#define IPATH_INTREG_64 0x40000 #define IPATH_DISABLED 0x80000 /* administratively disabled */ /* Use GPIO interrupts for new counters */ #define IPATH_GPIO_ERRINTRS 0x100000 @@ -958,6 +960,12 @@ static inline u32 ipath_get_rcvhdrtail(const struct ipath_portdata *pd) pd->port_rcvhdrtail_kvaddr)); } +static inline u64 ipath_read_ireg(const struct ipath_devdata *dd, ipath_kreg r) +{ + return (dd->ipath_flags & IPATH_INTREG_64) ? + ipath_read_kreg64(dd, r) : ipath_read_kreg32(dd, r); +} + /* * sysfs interface. */ -- cgit v1.2.3-59-g8ed1b From 1f813ca830f51ed404195750bdba86c41a8050ba Mon Sep 17 00:00:00 2001 From: Dave Olson Date: Sun, 6 Jan 2008 21:12:38 -0800 Subject: IB/ipath: Drop support for the original QHT7040 board The original QHT7040 had significant performance issues so there was an additional check in the driver for a newer serial number. Support for the small quantities of that board shipped has been dropped, so this patch removes the special checks to simplify the code. Signed-off-by: Dave Olson Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_iba6110.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c index 3bfaf04a2148..6976d96f6ce1 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6110.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c @@ -1595,8 +1595,7 @@ static int ipath_ht_early_init(struct ipath_devdata *dd) } ipath_get_eeprom_info(dd); - if (dd->ipath_boardrev == 5 && dd->ipath_serial[0] == '1' && - dd->ipath_serial[1] == '2' && dd->ipath_serial[2] == '8') { + if (dd->ipath_boardrev == 5) { /* * Later production QHT7040 has same changes as QHT7140, so * can use GPIO interrupts. They have serial #'s starting -- cgit v1.2.3-59-g8ed1b From 5851bb893e5bb87150817c180ccddcf4e78db1b6 Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Fri, 4 Jan 2008 10:47:12 -0800 Subject: RDMA/cma: Override default responder_resources with user value By default, the responder_resources parameter is set to that received in a connection request. The passive side may override this value when accepting the connection. Use the value provided by the passive side when transitioning the QP to RTR state, rather than the value given in the connect request. Without this change, the RTR transition may fail if the passive side supports fewer responder_resources than that in the request. For code consistency and to protect against QP destruction, restructure overriding initiator_depth to match how responder_resources is set. Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier --- drivers/infiniband/core/cma.c | 42 +++++++++++++++++++----------------------- 1 file changed, 19 insertions(+), 23 deletions(-) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 982836e69f55..637efead97a0 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -488,7 +488,8 @@ void rdma_destroy_qp(struct rdma_cm_id *id) } EXPORT_SYMBOL(rdma_destroy_qp); -static int cma_modify_qp_rtr(struct rdma_id_private *id_priv) +static int cma_modify_qp_rtr(struct rdma_id_private *id_priv, + struct rdma_conn_param *conn_param) { struct ib_qp_attr qp_attr; int qp_attr_mask, ret; @@ -514,13 +515,16 @@ static int cma_modify_qp_rtr(struct rdma_id_private *id_priv) if (ret) goto out; + if (conn_param) + qp_attr.max_dest_rd_atomic = conn_param->responder_resources; ret = ib_modify_qp(id_priv->id.qp, &qp_attr, qp_attr_mask); out: mutex_unlock(&id_priv->qp_mutex); return ret; } -static int cma_modify_qp_rts(struct rdma_id_private *id_priv) +static int cma_modify_qp_rts(struct rdma_id_private *id_priv, + struct rdma_conn_param *conn_param) { struct ib_qp_attr qp_attr; int qp_attr_mask, ret; @@ -536,6 +540,8 @@ static int cma_modify_qp_rts(struct rdma_id_private *id_priv) if (ret) goto out; + if (conn_param) + qp_attr.max_rd_atomic = conn_param->initiator_depth; ret = ib_modify_qp(id_priv->id.qp, &qp_attr, qp_attr_mask); out: mutex_unlock(&id_priv->qp_mutex); @@ -866,11 +872,11 @@ static int cma_rep_recv(struct rdma_id_private *id_priv) { int ret; - ret = cma_modify_qp_rtr(id_priv); + ret = cma_modify_qp_rtr(id_priv, NULL); if (ret) goto reject; - ret = cma_modify_qp_rts(id_priv); + ret = cma_modify_qp_rts(id_priv, NULL); if (ret) goto reject; @@ -2284,7 +2290,7 @@ static int cma_connect_iw(struct rdma_id_private *id_priv, sin = (struct sockaddr_in*) &id_priv->id.route.addr.dst_addr; cm_id->remote_addr = *sin; - ret = cma_modify_qp_rtr(id_priv); + ret = cma_modify_qp_rtr(id_priv, conn_param); if (ret) goto out; @@ -2347,25 +2353,15 @@ static int cma_accept_ib(struct rdma_id_private *id_priv, struct rdma_conn_param *conn_param) { struct ib_cm_rep_param rep; - struct ib_qp_attr qp_attr; - int qp_attr_mask, ret; - - if (id_priv->id.qp) { - ret = cma_modify_qp_rtr(id_priv); - if (ret) - goto out; + int ret; - qp_attr.qp_state = IB_QPS_RTS; - ret = ib_cm_init_qp_attr(id_priv->cm_id.ib, &qp_attr, - &qp_attr_mask); - if (ret) - goto out; + ret = cma_modify_qp_rtr(id_priv, conn_param); + if (ret) + goto out; - qp_attr.max_rd_atomic = conn_param->initiator_depth; - ret = ib_modify_qp(id_priv->id.qp, &qp_attr, qp_attr_mask); - if (ret) - goto out; - } + ret = cma_modify_qp_rts(id_priv, conn_param); + if (ret) + goto out; memset(&rep, 0, sizeof rep); rep.qp_num = id_priv->qp_num; @@ -2390,7 +2386,7 @@ static int cma_accept_iw(struct rdma_id_private *id_priv, struct iw_cm_conn_param iw_param; int ret; - ret = cma_modify_qp_rtr(id_priv); + ret = cma_modify_qp_rtr(id_priv, conn_param); if (ret) return ret; -- cgit v1.2.3-59-g8ed1b From 1a7d2dce4169ed42310926a5675fffd0986caa26 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 15 Oct 2007 00:49:07 -0500 Subject: IB/ehca: Use round_jiffies() for EQ polling timer Use round_jiffies() to align ehca's 1-second timer with other timers and potentially save power by sleeping cores for longer. Signed-off-by: Anton Blanchard Acked-by: Hoang-Nam Nguyen Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ehca/ehca_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c index c9e32b46387f..173d3e9f9268 100644 --- a/drivers/infiniband/hw/ehca/ehca_main.c +++ b/drivers/infiniband/hw/ehca/ehca_main.c @@ -934,7 +934,7 @@ void ehca_poll_eqs(unsigned long data) ehca_process_eq(shca, 0); } } - mod_timer(&poll_eqs_timer, jiffies + HZ); + mod_timer(&poll_eqs_timer, round_jiffies(jiffies + HZ)); spin_unlock(&shca_list_lock); } -- cgit v1.2.3-59-g8ed1b From 1d6e658e8e3247fcf0fa90c40fdfebf2e85a610e Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 25 Jan 2008 14:15:42 -0800 Subject: RDMA/cxgb3: Endianness annotation for irs field t3_rdma_init_wr.irs is a big-endian field, so declare it as __be32. This fixes one sparse warning. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb3/cxio_wr.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/cxgb3/cxio_wr.h b/drivers/infiniband/hw/cxgb3/cxio_wr.h index c84d4ac49355..de366b0627b8 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_wr.h +++ b/drivers/infiniband/hw/cxgb3/cxio_wr.h @@ -315,7 +315,7 @@ struct t3_rdma_init_wr { __be32 ird; __be64 qp_dma_addr; /* 7 */ __be32 qp_dma_size; /* 8 */ - u32 irs; + __be32 irs; }; struct t3_genbit { -- cgit v1.2.3-59-g8ed1b From cf9542aa923982428fbf6a6f815c32ae2c3da8c7 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 25 Jan 2008 14:15:42 -0800 Subject: IB/ipath: Fix some sparse warnings about shadowed symbols There are a few places in the ipath driver where a variable is re-declared within a block where it is already in scope. Most of these extra declarations can simply be removed, since the variable from the outer scope is used in a way so that it does not need to keep its variable across the block with the re-declaration. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_eeprom.c | 3 +-- drivers/infiniband/hw/ipath/ipath_qp.c | 2 -- 2 files changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_eeprom.c b/drivers/infiniband/hw/ipath/ipath_eeprom.c index a5b6299ed667..e28a42f53769 100644 --- a/drivers/infiniband/hw/ipath/ipath_eeprom.c +++ b/drivers/infiniband/hw/ipath/ipath_eeprom.c @@ -574,7 +574,7 @@ void ipath_get_eeprom_info(struct ipath_devdata *dd) struct ipath_devdata *dd0 = ipath_lookup(0); if (t && dd0->ipath_nguid > 1 && t <= dd0->ipath_nguid) { - u8 *bguid, oguid; + u8 oguid; dd->ipath_guid = dd0->ipath_guid; bguid = (u8 *) & dd->ipath_guid; @@ -674,7 +674,6 @@ void ipath_get_eeprom_info(struct ipath_devdata *dd) * elsewhere for backward-compatibility. */ char *snp = dd->ipath_serial; - int len; memcpy(snp, ifp->if_sprefix, sizeof ifp->if_sprefix); snp[sizeof ifp->if_sprefix] = '\0'; len = strlen(snp); diff --git a/drivers/infiniband/hw/ipath/ipath_qp.c b/drivers/infiniband/hw/ipath/ipath_qp.c index b405906974ca..80dc623cee40 100644 --- a/drivers/infiniband/hw/ipath/ipath_qp.c +++ b/drivers/infiniband/hw/ipath/ipath_qp.c @@ -855,8 +855,6 @@ struct ib_qp *ipath_create_qp(struct ib_pd *ibpd, * See ipath_mmap() for details. */ if (udata && udata->outlen >= sizeof(__u64)) { - int err; - if (!qp->r_rq.wq) { __u64 offset = 0; -- cgit v1.2.3-59-g8ed1b From 2fe7e6f7c9f55eac24c5b3cdf56af29ab9b0ca81 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 25 Jan 2008 14:15:42 -0800 Subject: IB/umad: Simplify and fix locking In addition to being overly complex, the locking in user_mad.c is broken: there were multiple reports of deadlocks and lockdep warnings. In particular it seems that a single thread may end up trying to take the same rwsem for reading more than once, which is explicitly forbidden in the comments in . To solve this, we change the locking to use plain mutexes instead of rwsems. There is one mutex per open file, which protects the contents of the struct ib_umad_file, including the array of agents and list of queued packets; and there is one mutex per struct ib_umad_port, which protects the contents, including the list of open files. We never hold the file mutex across calls to functions like ib_unregister_mad_agent(), which can call back into other ib_umad code to queue a packet, and we always hold the port mutex as long as we need to make sure that a device is not hot-unplugged from under us. This even makes things nicer for users of the -rt patch, since we remove calls to downgrade_write() (which is not implemented in -rt). Signed-off-by: Roland Dreier --- drivers/infiniband/core/user_mad.c | 115 +++++++++++++++++-------------------- 1 file changed, 53 insertions(+), 62 deletions(-) diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c index b53eac4611de..4e915104ac4c 100644 --- a/drivers/infiniband/core/user_mad.c +++ b/drivers/infiniband/core/user_mad.c @@ -2,6 +2,7 @@ * Copyright (c) 2004 Topspin Communications. All rights reserved. * Copyright (c) 2005 Voltaire, Inc. All rights reserved. * Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved. + * Copyright (c) 2008 Cisco. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU @@ -42,7 +43,7 @@ #include #include #include -#include +#include #include #include @@ -94,7 +95,7 @@ struct ib_umad_port { struct class_device *sm_class_dev; struct semaphore sm_sem; - struct rw_semaphore mutex; + struct mutex file_mutex; struct list_head file_list; struct ib_device *ib_dev; @@ -110,11 +111,11 @@ struct ib_umad_device { }; struct ib_umad_file { + struct mutex mutex; struct ib_umad_port *port; struct list_head recv_list; struct list_head send_list; struct list_head port_list; - spinlock_t recv_lock; spinlock_t send_lock; wait_queue_head_t recv_wait; struct ib_mad_agent *agent[IB_UMAD_MAX_AGENTS]; @@ -156,7 +157,7 @@ static int hdr_size(struct ib_umad_file *file) sizeof (struct ib_user_mad_hdr_old); } -/* caller must hold port->mutex at least for reading */ +/* caller must hold file->mutex */ static struct ib_mad_agent *__get_agent(struct ib_umad_file *file, int id) { return file->agents_dead ? NULL : file->agent[id]; @@ -168,32 +169,30 @@ static int queue_packet(struct ib_umad_file *file, { int ret = 1; - down_read(&file->port->mutex); + mutex_lock(&file->mutex); for (packet->mad.hdr.id = 0; packet->mad.hdr.id < IB_UMAD_MAX_AGENTS; packet->mad.hdr.id++) if (agent == __get_agent(file, packet->mad.hdr.id)) { - spin_lock_irq(&file->recv_lock); list_add_tail(&packet->list, &file->recv_list); - spin_unlock_irq(&file->recv_lock); wake_up_interruptible(&file->recv_wait); ret = 0; break; } - up_read(&file->port->mutex); + mutex_unlock(&file->mutex); return ret; } static void dequeue_send(struct ib_umad_file *file, struct ib_umad_packet *packet) - { +{ spin_lock_irq(&file->send_lock); list_del(&packet->list); spin_unlock_irq(&file->send_lock); - } +} static void send_handler(struct ib_mad_agent *agent, struct ib_mad_send_wc *send_wc) @@ -341,10 +340,10 @@ static ssize_t ib_umad_read(struct file *filp, char __user *buf, if (count < hdr_size(file)) return -EINVAL; - spin_lock_irq(&file->recv_lock); + mutex_lock(&file->mutex); while (list_empty(&file->recv_list)) { - spin_unlock_irq(&file->recv_lock); + mutex_unlock(&file->mutex); if (filp->f_flags & O_NONBLOCK) return -EAGAIN; @@ -353,13 +352,13 @@ static ssize_t ib_umad_read(struct file *filp, char __user *buf, !list_empty(&file->recv_list))) return -ERESTARTSYS; - spin_lock_irq(&file->recv_lock); + mutex_lock(&file->mutex); } packet = list_entry(file->recv_list.next, struct ib_umad_packet, list); list_del(&packet->list); - spin_unlock_irq(&file->recv_lock); + mutex_unlock(&file->mutex); if (packet->recv_wc) ret = copy_recv_mad(file, buf, packet, count); @@ -368,9 +367,9 @@ static ssize_t ib_umad_read(struct file *filp, char __user *buf, if (ret < 0) { /* Requeue packet */ - spin_lock_irq(&file->recv_lock); + mutex_lock(&file->mutex); list_add(&packet->list, &file->recv_list); - spin_unlock_irq(&file->recv_lock); + mutex_unlock(&file->mutex); } else { if (packet->recv_wc) ib_free_recv_mad(packet->recv_wc); @@ -481,7 +480,7 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, goto err; } - down_read(&file->port->mutex); + mutex_lock(&file->mutex); agent = __get_agent(file, packet->mad.hdr.id); if (!agent) { @@ -577,7 +576,7 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, if (ret) goto err_send; - up_read(&file->port->mutex); + mutex_unlock(&file->mutex); return count; err_send: @@ -587,7 +586,7 @@ err_msg: err_ah: ib_destroy_ah(ah); err_up: - up_read(&file->port->mutex); + mutex_unlock(&file->mutex); err: kfree(packet); return ret; @@ -613,11 +612,12 @@ static int ib_umad_reg_agent(struct ib_umad_file *file, void __user *arg, { struct ib_user_mad_reg_req ureq; struct ib_mad_reg_req req; - struct ib_mad_agent *agent; + struct ib_mad_agent *agent = NULL; int agent_id; int ret; - down_write(&file->port->mutex); + mutex_lock(&file->port->file_mutex); + mutex_lock(&file->mutex); if (!file->port->ib_dev) { ret = -EPIPE; @@ -666,13 +666,13 @@ found: send_handler, recv_handler, file); if (IS_ERR(agent)) { ret = PTR_ERR(agent); + agent = NULL; goto out; } if (put_user(agent_id, (u32 __user *) (arg + offsetof(struct ib_user_mad_reg_req, id)))) { ret = -EFAULT; - ib_unregister_mad_agent(agent); goto out; } @@ -690,7 +690,13 @@ found: ret = 0; out: - up_write(&file->port->mutex); + mutex_unlock(&file->mutex); + + if (ret && agent) + ib_unregister_mad_agent(agent); + + mutex_unlock(&file->port->file_mutex); + return ret; } @@ -703,7 +709,8 @@ static int ib_umad_unreg_agent(struct ib_umad_file *file, u32 __user *arg) if (get_user(id, arg)) return -EFAULT; - down_write(&file->port->mutex); + mutex_lock(&file->port->file_mutex); + mutex_lock(&file->mutex); if (id < 0 || id >= IB_UMAD_MAX_AGENTS || !__get_agent(file, id)) { ret = -EINVAL; @@ -714,11 +721,13 @@ static int ib_umad_unreg_agent(struct ib_umad_file *file, u32 __user *arg) file->agent[id] = NULL; out: - up_write(&file->port->mutex); + mutex_unlock(&file->mutex); if (agent) ib_unregister_mad_agent(agent); + mutex_unlock(&file->port->file_mutex); + return ret; } @@ -726,12 +735,12 @@ static long ib_umad_enable_pkey(struct ib_umad_file *file) { int ret = 0; - down_write(&file->port->mutex); + mutex_lock(&file->mutex); if (file->already_used) ret = -EINVAL; else file->use_pkey_index = 1; - up_write(&file->port->mutex); + mutex_unlock(&file->mutex); return ret; } @@ -783,7 +792,7 @@ static int ib_umad_open(struct inode *inode, struct file *filp) if (!port) return -ENXIO; - down_write(&port->mutex); + mutex_lock(&port->file_mutex); if (!port->ib_dev) { ret = -ENXIO; @@ -797,7 +806,7 @@ static int ib_umad_open(struct inode *inode, struct file *filp) goto out; } - spin_lock_init(&file->recv_lock); + mutex_init(&file->mutex); spin_lock_init(&file->send_lock); INIT_LIST_HEAD(&file->recv_list); INIT_LIST_HEAD(&file->send_list); @@ -809,7 +818,7 @@ static int ib_umad_open(struct inode *inode, struct file *filp) list_add_tail(&file->port_list, &port->file_list); out: - up_write(&port->mutex); + mutex_unlock(&port->file_mutex); return ret; } @@ -821,7 +830,8 @@ static int ib_umad_close(struct inode *inode, struct file *filp) int already_dead; int i; - down_write(&file->port->mutex); + mutex_lock(&file->port->file_mutex); + mutex_lock(&file->mutex); already_dead = file->agents_dead; file->agents_dead = 1; @@ -834,14 +844,14 @@ static int ib_umad_close(struct inode *inode, struct file *filp) list_del(&file->port_list); - downgrade_write(&file->port->mutex); + mutex_unlock(&file->mutex); if (!already_dead) for (i = 0; i < IB_UMAD_MAX_AGENTS; ++i) if (file->agent[i]) ib_unregister_mad_agent(file->agent[i]); - up_read(&file->port->mutex); + mutex_unlock(&file->port->file_mutex); kfree(file); kref_put(&dev->ref, ib_umad_release_dev); @@ -914,10 +924,10 @@ static int ib_umad_sm_close(struct inode *inode, struct file *filp) }; int ret = 0; - down_write(&port->mutex); + mutex_lock(&port->file_mutex); if (port->ib_dev) ret = ib_modify_port(port->ib_dev, port->port_num, 0, &props); - up_write(&port->mutex); + mutex_unlock(&port->file_mutex); up(&port->sm_sem); @@ -981,7 +991,7 @@ static int ib_umad_init_port(struct ib_device *device, int port_num, port->ib_dev = device; port->port_num = port_num; init_MUTEX(&port->sm_sem); - init_rwsem(&port->mutex); + mutex_init(&port->file_mutex); INIT_LIST_HEAD(&port->file_list); port->dev = cdev_alloc(); @@ -1052,6 +1062,7 @@ err_cdev: static void ib_umad_kill_port(struct ib_umad_port *port) { struct ib_umad_file *file; + int already_dead; int id; class_set_devdata(port->class_dev, NULL); @@ -1067,42 +1078,22 @@ static void ib_umad_kill_port(struct ib_umad_port *port) umad_port[port->dev_num] = NULL; spin_unlock(&port_lock); - down_write(&port->mutex); + mutex_lock(&port->file_mutex); port->ib_dev = NULL; - /* - * Now go through the list of files attached to this port and - * unregister all of their MAD agents. We need to hold - * port->mutex while doing this to avoid racing with - * ib_umad_close(), but we can't hold the mutex for writing - * while calling ib_unregister_mad_agent(), since that might - * deadlock by calling back into queue_packet(). So we - * downgrade our lock to a read lock, and then drop and - * reacquire the write lock for the next iteration. - * - * We do list_del_init() on the file's list_head so that the - * list_del in ib_umad_close() is still OK, even after the - * file is removed from the list. - */ - while (!list_empty(&port->file_list)) { - file = list_entry(port->file_list.next, struct ib_umad_file, - port_list); - + list_for_each_entry(file, &port->file_list, port_list) { + mutex_lock(&file->mutex); + already_dead = file->agents_dead; file->agents_dead = 1; - list_del_init(&file->port_list); - - downgrade_write(&port->mutex); + mutex_unlock(&file->mutex); for (id = 0; id < IB_UMAD_MAX_AGENTS; ++id) if (file->agent[id]) ib_unregister_mad_agent(file->agent[id]); - - up_read(&port->mutex); - down_write(&port->mutex); } - up_write(&port->mutex); + mutex_unlock(&port->file_mutex); clear_bit(port->dev_num, dev_map); } -- cgit v1.2.3-59-g8ed1b From a656eb758fc6e6a42659ecf5ba34a5c5a2aeec17 Mon Sep 17 00:00:00 2001 From: Olaf Kirch Date: Wed, 16 Jan 2008 18:36:27 +0100 Subject: IB/fmr_pool: Flush serial numbers can get out of sync Normally, the serial numbers for flush requests and flushes executed for an FMR pool should be in sync. However, if the FMR pool flushes dirty FMRs because the dirty_watermark was reached, we wake up the cleanup thread and let it do its stuff. As a side effect, the cleanup thread increments pool->flush_ser, which leaves it one higher than pool->req_ser. The next time the user calls ib_flush_fmr_pool(), the cleanup thread will be woken up, but ib_flush_fmr_pool() won't wait for the flush to complete because flush_ser is already past req_ser. This means the FMRs that the user expects to be flushed may not have all been flushed when the function returns. Fix this by telling the cleanup thread to do work exclusively by incrementing req_ser, and by moving the comparison of dirty_len and dirty_watermark into ib_fmr_pool_unmap(). Signed-off-by: Olaf Kirch --- drivers/infiniband/core/fmr_pool.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/infiniband/core/fmr_pool.c b/drivers/infiniband/core/fmr_pool.c index e8d5f6b64998..4a476a870214 100644 --- a/drivers/infiniband/core/fmr_pool.c +++ b/drivers/infiniband/core/fmr_pool.c @@ -182,8 +182,7 @@ static int ib_fmr_cleanup_thread(void *pool_ptr) struct ib_fmr_pool *pool = pool_ptr; do { - if (pool->dirty_len >= pool->dirty_watermark || - atomic_read(&pool->flush_ser) - atomic_read(&pool->req_ser) < 0) { + if (atomic_read(&pool->flush_ser) - atomic_read(&pool->req_ser) < 0) { ib_fmr_batch_release(pool); atomic_inc(&pool->flush_ser); @@ -194,8 +193,7 @@ static int ib_fmr_cleanup_thread(void *pool_ptr) } set_current_state(TASK_INTERRUPTIBLE); - if (pool->dirty_len < pool->dirty_watermark && - atomic_read(&pool->flush_ser) - atomic_read(&pool->req_ser) >= 0 && + if (atomic_read(&pool->flush_ser) - atomic_read(&pool->req_ser) >= 0 && !kthread_should_stop()) schedule(); __set_current_state(TASK_RUNNING); @@ -511,8 +509,10 @@ int ib_fmr_pool_unmap(struct ib_pool_fmr *fmr) list_add_tail(&fmr->list, &pool->free_list); } else { list_add_tail(&fmr->list, &pool->dirty_list); - ++pool->dirty_len; - wake_up_process(pool->thread); + if (++pool->dirty_len >= pool->dirty_watermark) { + atomic_inc(&pool->req_ser); + wake_up_process(pool->thread); + } } } -- cgit v1.2.3-59-g8ed1b From a3cd7d9070be417a21905c997ee32d756d999b38 Mon Sep 17 00:00:00 2001 From: Olaf Kirch Date: Wed, 16 Jan 2008 18:37:16 +0100 Subject: IB/fmr_pool: ib_fmr_pool_flush() should flush all dirty FMRs When a FMR is released via ib_fmr_pool_unmap(), the FMR usually ends up on the free_list rather than the dirty_list (because we allow a certain number of remappings before actually requiring a flush). However, ib_fmr_batch_release() only looks at dirty_list when flushing out old mappings. This means that when ib_fmr_pool_flush() is used to force a flush of the FMR pool, some dirty FMRs that have not reached their maximum remap count will not actually be flushed. Fix this by flushing all FMRs that have been used at least once in ib_fmr_batch_release(). Signed-off-by: Olaf Kirch Signed-off-by: Roland Dreier --- drivers/infiniband/core/fmr_pool.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/drivers/infiniband/core/fmr_pool.c b/drivers/infiniband/core/fmr_pool.c index 4a476a870214..6c7aa59794d4 100644 --- a/drivers/infiniband/core/fmr_pool.c +++ b/drivers/infiniband/core/fmr_pool.c @@ -139,7 +139,7 @@ static inline struct ib_pool_fmr *ib_fmr_cache_lookup(struct ib_fmr_pool *pool, static void ib_fmr_batch_release(struct ib_fmr_pool *pool) { int ret; - struct ib_pool_fmr *fmr; + struct ib_pool_fmr *fmr, *next; LIST_HEAD(unmap_list); LIST_HEAD(fmr_list); @@ -158,6 +158,20 @@ static void ib_fmr_batch_release(struct ib_fmr_pool *pool) #endif } + /* + * The free_list may hold FMRs that have been put there + * because they haven't reached the max_remap count. + * Invalidate their mapping as well. + */ + list_for_each_entry_safe(fmr, next, &pool->free_list, list) { + if (fmr->remap_count == 0) + continue; + hlist_del_init(&fmr->cache_node); + fmr->remap_count = 0; + list_add_tail(&fmr->fmr->list, &fmr_list); + list_move(&fmr->list, &unmap_list); + } + list_splice(&pool->dirty_list, &unmap_list); INIT_LIST_HEAD(&pool->dirty_list); pool->dirty_len = 0; @@ -367,11 +381,6 @@ void ib_destroy_fmr_pool(struct ib_fmr_pool *pool) i = 0; list_for_each_entry_safe(fmr, tmp, &pool->free_list, list) { - if (fmr->remap_count) { - INIT_LIST_HEAD(&fmr_list); - list_add_tail(&fmr->fmr->list, &fmr_list); - ib_unmap_fmr(&fmr_list); - } ib_dealloc_fmr(fmr->fmr); list_del(&fmr->list); kfree(fmr); -- cgit v1.2.3-59-g8ed1b From a4ef1451dfba92f51934e8331f634497b9ed3393 Mon Sep 17 00:00:00 2001 From: Erez Zilber Date: Thu, 17 Jan 2008 11:51:58 +0200 Subject: IB/iser: Print information about unhandled RDMA CM events Some RDMA CM events are not supported or not handled in iSER. This patch adds some info (printk) for the user about them. Signed-off-by: Erez Zilber Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/iser/iser_verbs.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/ulp/iser/iser_verbs.c b/drivers/infiniband/ulp/iser/iser_verbs.c index 91b2b39eb20c..714b8db02b29 100644 --- a/drivers/infiniband/ulp/iser/iser_verbs.c +++ b/drivers/infiniband/ulp/iser/iser_verbs.c @@ -475,13 +475,11 @@ static int iser_cma_handler(struct rdma_cm_id *cma_id, struct rdma_cm_event *eve iser_disconnected_handler(cma_id); break; case RDMA_CM_EVENT_DEVICE_REMOVAL: + iser_err("Device removal is currently unsupported\n"); BUG(); break; - case RDMA_CM_EVENT_CONNECT_RESPONSE: - BUG(); - break; - case RDMA_CM_EVENT_CONNECT_REQUEST: default: + iser_err("Unexpected RDMA CM event (%d)\n", event->event); break; } return ret; -- cgit v1.2.3-59-g8ed1b From 6410627eb9804e541b83d220c8e914ce64475b31 Mon Sep 17 00:00:00 2001 From: Erez Zilber Date: Thu, 17 Jan 2008 11:53:17 +0200 Subject: IB/iser: Add change_queue_depth method Add a .change_queue_depth handler to the scsi_host_template in the iSER driver. iscsi_change_queue_depth was added to iscsi_tcp in order to solve the problem of queue depth which was too high for some targets. It is also applicable for iSER. Signed-off-by: Erez Zilber Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/iser/iscsi_iser.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c index bad8dacafd10..dfa5a4544187 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.c +++ b/drivers/infiniband/ulp/iser/iscsi_iser.c @@ -551,6 +551,7 @@ static struct scsi_host_template iscsi_iser_sht = { .module = THIS_MODULE, .name = "iSCSI Initiator over iSER, v." DRV_VER, .queuecommand = iscsi_queuecommand, + .change_queue_depth = iscsi_change_queue_depth, .can_queue = ISCSI_DEF_XMIT_CMDS_MAX - 1, .sg_tablesize = ISCSI_ISER_SG_TABLESIZE, .max_sectors = 1024, -- cgit v1.2.3-59-g8ed1b From 0c86e280fe8a08d4ae30b77e46a1e7da28d756c9 Mon Sep 17 00:00:00 2001 From: Hoang-Nam Nguyen Date: Thu, 17 Jan 2008 15:03:55 +0100 Subject: IB/ehca: Remove CQ-QP-link before destroying QP in error path of create_qp() Signed-off-by: Hoang-Nam Nguyen Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ehca/ehca_qp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c index f116eb7c0b11..26c6a945459f 100644 --- a/drivers/infiniband/hw/ehca/ehca_qp.c +++ b/drivers/infiniband/hw/ehca/ehca_qp.c @@ -769,12 +769,15 @@ static struct ehca_qp *internal_create_qp( if (ib_copy_to_udata(udata, &resp, sizeof resp)) { ehca_err(pd->device, "Copy to udata failed"); ret = -EINVAL; - goto create_qp_exit4; + goto create_qp_exit5; } } return my_qp; +create_qp_exit5: + ehca_cq_unassign_qp(my_qp->send_cq, my_qp->real_qp_num); + create_qp_exit4: if (HAS_RQ(my_qp)) ipz_queue_dtor(my_pd, &my_qp->ipz_rqueue); -- cgit v1.2.3-59-g8ed1b From b8b50e353b85bc3c791dd2b99370ac300ebcd186 Mon Sep 17 00:00:00 2001 From: Hoang-Nam Nguyen Date: Thu, 17 Jan 2008 15:04:32 +0100 Subject: IB/ehca: Define array to store SMI/GSI QPs Signed-off-by: Hoang-Nam Nguyen Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ehca/ehca_classes.h | 2 +- drivers/infiniband/hw/ehca/ehca_main.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/ehca/ehca_classes.h b/drivers/infiniband/hw/ehca/ehca_classes.h index 74d2b72a11d8..936580d86ad3 100644 --- a/drivers/infiniband/hw/ehca/ehca_classes.h +++ b/drivers/infiniband/hw/ehca/ehca_classes.h @@ -94,7 +94,7 @@ struct ehca_sma_attr { struct ehca_sport { struct ib_cq *ibcq_aqp1; - struct ib_qp *ibqp_aqp1; + struct ib_qp *ibqp_sqp[2]; enum ib_port_state port_state; struct ehca_sma_attr saved_attr; }; diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c index 173d3e9f9268..0a34083dac8a 100644 --- a/drivers/infiniband/hw/ehca/ehca_main.c +++ b/drivers/infiniband/hw/ehca/ehca_main.c @@ -511,7 +511,7 @@ static int ehca_create_aqp1(struct ehca_shca *shca, u32 port) } sport->ibcq_aqp1 = ibcq; - if (sport->ibqp_aqp1) { + if (sport->ibqp_sqp[IB_QPT_GSI]) { ehca_err(&shca->ib_device, "AQP1 QP is already created."); ret = -EPERM; goto create_aqp1; @@ -537,7 +537,7 @@ static int ehca_create_aqp1(struct ehca_shca *shca, u32 port) ret = PTR_ERR(ibqp); goto create_aqp1; } - sport->ibqp_aqp1 = ibqp; + sport->ibqp_sqp[IB_QPT_GSI] = ibqp; return 0; @@ -550,7 +550,7 @@ static int ehca_destroy_aqp1(struct ehca_sport *sport) { int ret; - ret = ib_destroy_qp(sport->ibqp_aqp1); + ret = ib_destroy_qp(sport->ibqp_sqp[IB_QPT_GSI]); if (ret) { ehca_gen_err("Cannot destroy AQP1 QP. ret=%i", ret); return ret; -- cgit v1.2.3-59-g8ed1b From bbdd267ef2796e96b461b8447b2026ce06e6ec4b Mon Sep 17 00:00:00 2001 From: Hoang-Nam Nguyen Date: Thu, 17 Jan 2008 15:05:45 +0100 Subject: IB/ehca: Add "port connection autodetect mode" This patch enhances ehca with a capability to "autodetect" the ports being connected physically. In order to utilize that function the module option nr_ports must be set to -1 (default is 2 - two ports). This feature is experimental and will made the default later. More detail: If the user connects only one port to the switch, current code requires 1) port one to be connected and 2) module option nr_ports=1 to be given. If autodetect is enabled, ehca will not wait at creation of the GSI QP for the respective port to become active. Since firmware does not accept modify_qp() while the port is down at initialization, we need to cache all calls to modify_qp() for the SMI/GSI QP and just return a good return code. When a port is activated and we get a PORT_ACTIVE event, we replay the cached modify-qp() parms and re-trigger any posted recv WRs. Only then do we forward the PORT_ACTIVE event to registered clients. The result of this autodetect patch is that all ports will be accessible by the users. Depending on their respective cabling only those ports that are connected properly will become operable. If a user tries to modify a regular QP of a non-connected port, modify_qp() will fail. Furthermore, ibv_devinfo should show the port state accordingly. Note that this patch primarily improves the loading behaviour of ehca. If the cable is removed while the driver is operating and plugged in again, firmware will handle that properly by sending an appropriate async event. Signed-off-by: Hoang-Nam Nguyen Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ehca/ehca_classes.h | 16 +++ drivers/infiniband/hw/ehca/ehca_irq.c | 26 ++++- drivers/infiniband/hw/ehca/ehca_iverbs.h | 2 + drivers/infiniband/hw/ehca/ehca_main.c | 7 +- drivers/infiniband/hw/ehca/ehca_qp.c | 159 +++++++++++++++++++++++++++++- drivers/infiniband/hw/ehca/ehca_sqp.c | 6 +- 6 files changed, 201 insertions(+), 15 deletions(-) diff --git a/drivers/infiniband/hw/ehca/ehca_classes.h b/drivers/infiniband/hw/ehca/ehca_classes.h index 936580d86ad3..2502366e845f 100644 --- a/drivers/infiniband/hw/ehca/ehca_classes.h +++ b/drivers/infiniband/hw/ehca/ehca_classes.h @@ -95,6 +95,10 @@ struct ehca_sma_attr { struct ehca_sport { struct ib_cq *ibcq_aqp1; struct ib_qp *ibqp_sqp[2]; + /* lock to serialze modify_qp() calls for sqp in normal + * and irq path (when event PORT_ACTIVE is received first time) + */ + spinlock_t mod_sqp_lock; enum ib_port_state port_state; struct ehca_sma_attr saved_attr; }; @@ -141,6 +145,14 @@ enum ehca_ext_qp_type { EQPT_SRQ = 3, }; +/* struct to cache modify_qp()'s parms for GSI/SMI qp */ +struct ehca_mod_qp_parm { + int mask; + struct ib_qp_attr attr; +}; + +#define EHCA_MOD_QP_PARM_MAX 4 + struct ehca_qp { union { struct ib_qp ib_qp; @@ -164,6 +176,9 @@ struct ehca_qp { struct ehca_cq *recv_cq; unsigned int sqerr_purgeflag; struct hlist_node list_entries; + /* array to cache modify_qp()'s parms for GSI/SMI qp */ + struct ehca_mod_qp_parm *mod_qp_parm; + int mod_qp_parm_idx; /* mmap counter for resources mapped into user space */ u32 mm_count_squeue; u32 mm_count_rqueue; @@ -323,6 +338,7 @@ extern int ehca_port_act_time; extern int ehca_use_hp_mr; extern int ehca_scaling_code; extern int ehca_lock_hcalls; +extern int ehca_nr_ports; struct ipzu_queue_resp { u32 qe_size; /* queue entry size */ diff --git a/drivers/infiniband/hw/ehca/ehca_irq.c b/drivers/infiniband/hw/ehca/ehca_irq.c index 4c734ecef11d..863b34fa9ff9 100644 --- a/drivers/infiniband/hw/ehca/ehca_irq.c +++ b/drivers/infiniband/hw/ehca/ehca_irq.c @@ -356,17 +356,33 @@ static void parse_ec(struct ehca_shca *shca, u64 eqe) u8 ec = EHCA_BMASK_GET(NEQE_EVENT_CODE, eqe); u8 port = EHCA_BMASK_GET(NEQE_PORT_NUMBER, eqe); u8 spec_event; + struct ehca_sport *sport = &shca->sport[port - 1]; + unsigned long flags; switch (ec) { case 0x30: /* port availability change */ if (EHCA_BMASK_GET(NEQE_PORT_AVAILABILITY, eqe)) { - shca->sport[port - 1].port_state = IB_PORT_ACTIVE; + int suppress_event; + /* replay modify_qp for sqps */ + spin_lock_irqsave(&sport->mod_sqp_lock, flags); + suppress_event = !sport->ibqp_sqp[IB_QPT_GSI]; + if (sport->ibqp_sqp[IB_QPT_SMI]) + ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_SMI]); + if (!suppress_event) + ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_GSI]); + spin_unlock_irqrestore(&sport->mod_sqp_lock, flags); + + /* AQP1 was destroyed, ignore this event */ + if (suppress_event) + break; + + sport->port_state = IB_PORT_ACTIVE; dispatch_port_event(shca, port, IB_EVENT_PORT_ACTIVE, "is active"); ehca_query_sma_attr(shca, port, - &shca->sport[port - 1].saved_attr); + &sport->saved_attr); } else { - shca->sport[port - 1].port_state = IB_PORT_DOWN; + sport->port_state = IB_PORT_DOWN; dispatch_port_event(shca, port, IB_EVENT_PORT_ERR, "is inactive"); } @@ -380,11 +396,11 @@ static void parse_ec(struct ehca_shca *shca, u64 eqe) ehca_warn(&shca->ib_device, "disruptive port " "%d configuration change", port); - shca->sport[port - 1].port_state = IB_PORT_DOWN; + sport->port_state = IB_PORT_DOWN; dispatch_port_event(shca, port, IB_EVENT_PORT_ERR, "is inactive"); - shca->sport[port - 1].port_state = IB_PORT_ACTIVE; + sport->port_state = IB_PORT_ACTIVE; dispatch_port_event(shca, port, IB_EVENT_PORT_ACTIVE, "is active"); } else diff --git a/drivers/infiniband/hw/ehca/ehca_iverbs.h b/drivers/infiniband/hw/ehca/ehca_iverbs.h index 5485799cdc8d..c469bfde2708 100644 --- a/drivers/infiniband/hw/ehca/ehca_iverbs.h +++ b/drivers/infiniband/hw/ehca/ehca_iverbs.h @@ -200,4 +200,6 @@ void ehca_free_fw_ctrlblock(void *ptr); #define ehca_free_fw_ctrlblock(ptr) free_page((unsigned long)(ptr)) #endif +void ehca_recover_sqp(struct ib_qp *sqp); + #endif diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c index 0a34083dac8a..84c9b7b8669b 100644 --- a/drivers/infiniband/hw/ehca/ehca_main.c +++ b/drivers/infiniband/hw/ehca/ehca_main.c @@ -90,7 +90,8 @@ MODULE_PARM_DESC(hw_level, "hardware level" " (0: autosensing (default), 1: v. 0.20, 2: v. 0.21)"); MODULE_PARM_DESC(nr_ports, - "number of connected ports (default: 2)"); + "number of connected ports (-1: autodetect, 1: port one only, " + "2: two ports (default)"); MODULE_PARM_DESC(use_hp_mr, "high performance MRs (0: no (default), 1: yes)"); MODULE_PARM_DESC(port_act_time, @@ -693,7 +694,7 @@ static int __devinit ehca_probe(struct of_device *dev, struct ehca_shca *shca; const u64 *handle; struct ib_pd *ibpd; - int ret; + int ret, i; handle = of_get_property(dev->node, "ibm,hca-handle", NULL); if (!handle) { @@ -714,6 +715,8 @@ static int __devinit ehca_probe(struct of_device *dev, return -ENOMEM; } mutex_init(&shca->modify_mutex); + for (i = 0; i < ARRAY_SIZE(shca->sport); i++) + spin_lock_init(&shca->sport[i].mod_sqp_lock); shca->ofdev = dev; shca->ipz_hca_handle.handle = *handle; diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c index 26c6a945459f..8d3c35fa051b 100644 --- a/drivers/infiniband/hw/ehca/ehca_qp.c +++ b/drivers/infiniband/hw/ehca/ehca_qp.c @@ -729,12 +729,31 @@ static struct ehca_qp *internal_create_qp( init_attr->cap.max_send_wr = parms.squeue.act_nr_wqes; my_qp->init_attr = *init_attr; + if (qp_type == IB_QPT_SMI || qp_type == IB_QPT_GSI) { + shca->sport[init_attr->port_num - 1].ibqp_sqp[qp_type] = + &my_qp->ib_qp; + if (ehca_nr_ports < 0) { + /* alloc array to cache subsequent modify qp parms + * for autodetect mode + */ + my_qp->mod_qp_parm = + kzalloc(EHCA_MOD_QP_PARM_MAX * + sizeof(*my_qp->mod_qp_parm), + GFP_KERNEL); + if (!my_qp->mod_qp_parm) { + ehca_err(pd->device, + "Could not alloc mod_qp_parm"); + goto create_qp_exit4; + } + } + } + /* NOTE: define_apq0() not supported yet */ if (qp_type == IB_QPT_GSI) { h_ret = ehca_define_sqp(shca, my_qp, init_attr); if (h_ret != H_SUCCESS) { ret = ehca2ib_return_code(h_ret); - goto create_qp_exit4; + goto create_qp_exit5; } } @@ -743,7 +762,7 @@ static struct ehca_qp *internal_create_qp( if (ret) { ehca_err(pd->device, "Couldn't assign qp to send_cq ret=%i", ret); - goto create_qp_exit4; + goto create_qp_exit5; } } @@ -769,15 +788,18 @@ static struct ehca_qp *internal_create_qp( if (ib_copy_to_udata(udata, &resp, sizeof resp)) { ehca_err(pd->device, "Copy to udata failed"); ret = -EINVAL; - goto create_qp_exit5; + goto create_qp_exit6; } } return my_qp; -create_qp_exit5: +create_qp_exit6: ehca_cq_unassign_qp(my_qp->send_cq, my_qp->real_qp_num); +create_qp_exit5: + kfree(my_qp->mod_qp_parm); + create_qp_exit4: if (HAS_RQ(my_qp)) ipz_queue_dtor(my_pd, &my_qp->ipz_rqueue); @@ -995,7 +1017,7 @@ static int internal_modify_qp(struct ib_qp *ibqp, unsigned long flags = 0; /* do query_qp to obtain current attr values */ - mqpcb = ehca_alloc_fw_ctrlblock(GFP_KERNEL); + mqpcb = ehca_alloc_fw_ctrlblock(GFP_ATOMIC); if (!mqpcb) { ehca_err(ibqp->device, "Could not get zeroed page for mqpcb " "ehca_qp=%p qp_num=%x ", my_qp, ibqp->qp_num); @@ -1183,6 +1205,8 @@ static int internal_modify_qp(struct ib_qp *ibqp, update_mask |= EHCA_BMASK_SET(MQPCB_MASK_PRIM_P_KEY_IDX, 1); } if (attr_mask & IB_QP_PORT) { + struct ehca_sport *sport; + struct ehca_qp *aqp1; if (attr->port_num < 1 || attr->port_num > shca->num_ports) { ret = -EINVAL; ehca_err(ibqp->device, "Invalid port=%x. " @@ -1191,6 +1215,29 @@ static int internal_modify_qp(struct ib_qp *ibqp, shca->num_ports); goto modify_qp_exit2; } + sport = &shca->sport[attr->port_num - 1]; + if (!sport->ibqp_sqp[IB_QPT_GSI]) { + /* should not occur */ + ret = -EFAULT; + ehca_err(ibqp->device, "AQP1 was not created for " + "port=%x", attr->port_num); + goto modify_qp_exit2; + } + aqp1 = container_of(sport->ibqp_sqp[IB_QPT_GSI], + struct ehca_qp, ib_qp); + if (ibqp->qp_type != IB_QPT_GSI && + ibqp->qp_type != IB_QPT_SMI && + aqp1->mod_qp_parm) { + /* + * firmware will reject this modify_qp() because + * port is not activated/initialized fully + */ + ret = -EFAULT; + ehca_warn(ibqp->device, "Couldn't modify qp port=%x: " + "either port is being activated (try again) " + "or cabling issue", attr->port_num); + goto modify_qp_exit2; + } mqpcb->prim_phys_port = attr->port_num; update_mask |= EHCA_BMASK_SET(MQPCB_MASK_PRIM_PHYS_PORT, 1); } @@ -1470,6 +1517,8 @@ modify_qp_exit1: int ehca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask, struct ib_udata *udata) { + struct ehca_shca *shca = container_of(ibqp->device, struct ehca_shca, + ib_device); struct ehca_qp *my_qp = container_of(ibqp, struct ehca_qp, ib_qp); struct ehca_pd *my_pd = container_of(my_qp->ib_qp.pd, struct ehca_pd, ib_pd); @@ -1482,9 +1531,100 @@ int ehca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask, return -EINVAL; } + /* The if-block below caches qp_attr to be modified for GSI and SMI + * qps during the initialization by ib_mad. When the respective port + * is activated, ie we got an event PORT_ACTIVE, we'll replay the + * cached modify calls sequence, see ehca_recover_sqs() below. + * Why that is required: + * 1) If one port is connected, older code requires that port one + * to be connected and module option nr_ports=1 to be given by + * user, which is very inconvenient for end user. + * 2) Firmware accepts modify_qp() only if respective port has become + * active. Older code had a wait loop of 30sec create_qp()/ + * define_aqp1(), which is not appropriate in practice. This + * code now removes that wait loop, see define_aqp1(), and always + * reports all ports to ib_mad resp. users. Only activated ports + * will then usable for the users. + */ + if (ibqp->qp_type == IB_QPT_GSI || ibqp->qp_type == IB_QPT_SMI) { + int port = my_qp->init_attr.port_num; + struct ehca_sport *sport = &shca->sport[port - 1]; + unsigned long flags; + spin_lock_irqsave(&sport->mod_sqp_lock, flags); + /* cache qp_attr only during init */ + if (my_qp->mod_qp_parm) { + struct ehca_mod_qp_parm *p; + if (my_qp->mod_qp_parm_idx >= EHCA_MOD_QP_PARM_MAX) { + ehca_err(&shca->ib_device, + "mod_qp_parm overflow state=%x port=%x" + " type=%x", attr->qp_state, + my_qp->init_attr.port_num, + ibqp->qp_type); + spin_unlock_irqrestore(&sport->mod_sqp_lock, + flags); + return -EINVAL; + } + p = &my_qp->mod_qp_parm[my_qp->mod_qp_parm_idx]; + p->mask = attr_mask; + p->attr = *attr; + my_qp->mod_qp_parm_idx++; + ehca_dbg(&shca->ib_device, + "Saved qp_attr for state=%x port=%x type=%x", + attr->qp_state, my_qp->init_attr.port_num, + ibqp->qp_type); + spin_unlock_irqrestore(&sport->mod_sqp_lock, flags); + return 0; + } + spin_unlock_irqrestore(&sport->mod_sqp_lock, flags); + } + return internal_modify_qp(ibqp, attr, attr_mask, 0); } +void ehca_recover_sqp(struct ib_qp *sqp) +{ + struct ehca_qp *my_sqp = container_of(sqp, struct ehca_qp, ib_qp); + int port = my_sqp->init_attr.port_num; + struct ib_qp_attr attr; + struct ehca_mod_qp_parm *qp_parm; + int i, qp_parm_idx, ret; + unsigned long flags, wr_cnt; + + if (!my_sqp->mod_qp_parm) + return; + ehca_dbg(sqp->device, "SQP port=%x qp_num=%x", port, sqp->qp_num); + + qp_parm = my_sqp->mod_qp_parm; + qp_parm_idx = my_sqp->mod_qp_parm_idx; + for (i = 0; i < qp_parm_idx; i++) { + attr = qp_parm[i].attr; + ret = internal_modify_qp(sqp, &attr, qp_parm[i].mask, 0); + if (ret) { + ehca_err(sqp->device, "Could not modify SQP port=%x " + "qp_num=%x ret=%x", port, sqp->qp_num, ret); + goto free_qp_parm; + } + ehca_dbg(sqp->device, "SQP port=%x qp_num=%x in state=%x", + port, sqp->qp_num, attr.qp_state); + } + + /* re-trigger posted recv wrs */ + wr_cnt = my_sqp->ipz_rqueue.current_q_offset / + my_sqp->ipz_rqueue.qe_size; + if (wr_cnt) { + spin_lock_irqsave(&my_sqp->spinlock_r, flags); + hipz_update_rqa(my_sqp, wr_cnt); + spin_unlock_irqrestore(&my_sqp->spinlock_r, flags); + ehca_dbg(sqp->device, "doorbell port=%x qp_num=%x wr_cnt=%lx", + port, sqp->qp_num, wr_cnt); + } + +free_qp_parm: + kfree(qp_parm); + /* this prevents subsequent calls to modify_qp() to cache qp_attr */ + my_sqp->mod_qp_parm = NULL; +} + int ehca_query_qp(struct ib_qp *qp, struct ib_qp_attr *qp_attr, int qp_attr_mask, struct ib_qp_init_attr *qp_init_attr) @@ -1772,6 +1912,7 @@ static int internal_destroy_qp(struct ib_device *dev, struct ehca_qp *my_qp, struct ehca_shca *shca = container_of(dev, struct ehca_shca, ib_device); struct ehca_pd *my_pd = container_of(my_qp->ib_qp.pd, struct ehca_pd, ib_pd); + struct ehca_sport *sport = &shca->sport[my_qp->init_attr.port_num - 1]; u32 cur_pid = current->tgid; u32 qp_num = my_qp->real_qp_num; int ret; @@ -1818,6 +1959,14 @@ static int internal_destroy_qp(struct ib_device *dev, struct ehca_qp *my_qp, port_num = my_qp->init_attr.port_num; qp_type = my_qp->init_attr.qp_type; + if (qp_type == IB_QPT_SMI || qp_type == IB_QPT_GSI) { + spin_lock_irqsave(&sport->mod_sqp_lock, flags); + kfree(my_qp->mod_qp_parm); + my_qp->mod_qp_parm = NULL; + shca->sport[port_num - 1].ibqp_sqp[qp_type] = NULL; + spin_unlock_irqrestore(&sport->mod_sqp_lock, flags); + } + /* no support for IB_QPT_SMI yet */ if (qp_type == IB_QPT_GSI) { struct ib_event event; diff --git a/drivers/infiniband/hw/ehca/ehca_sqp.c b/drivers/infiniband/hw/ehca/ehca_sqp.c index f0792e5fbd02..79e72b25b252 100644 --- a/drivers/infiniband/hw/ehca/ehca_sqp.c +++ b/drivers/infiniband/hw/ehca/ehca_sqp.c @@ -40,11 +40,8 @@ */ -#include -#include #include "ehca_classes.h" #include "ehca_tools.h" -#include "ehca_qes.h" #include "ehca_iverbs.h" #include "hcp_if.h" @@ -93,6 +90,9 @@ u64 ehca_define_sqp(struct ehca_shca *shca, return H_PARAMETER; } + if (ehca_nr_ports < 0) /* autodetect mode */ + return H_SUCCESS; + for (counter = 0; shca->sport[port - 1].port_state != IB_PORT_ACTIVE && counter < ehca_port_act_time; -- cgit v1.2.3-59-g8ed1b From 2ec8e662416cc9a171cdfe3d75e1ff00ba757859 Mon Sep 17 00:00:00 2001 From: Joachim Fenkes Date: Thu, 17 Jan 2008 15:07:24 +0100 Subject: IB/ehca: Prevent RDMA-related connection failures on some eHCA2 hardware Some HW revisions of eHCA2 may cause an RC connection to break if they received RDMA Reads over that connection before. This can be prevented by assuring that, after the first RDMA Read, the QP receives a new RDMA Read every few million link packets. Include code into the driver that inserts an empty (size 0) RDMA Read into the message stream every now and then if the consumer doesn't post them frequently enough. Signed-off-by: Joachim Fenkes Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ehca/ehca_classes.h | 5 ++ drivers/infiniband/hw/ehca/ehca_qp.c | 14 ++-- drivers/infiniband/hw/ehca/ehca_reqs.c | 112 +++++++++++++++++++++--------- 3 files changed, 95 insertions(+), 36 deletions(-) diff --git a/drivers/infiniband/hw/ehca/ehca_classes.h b/drivers/infiniband/hw/ehca/ehca_classes.h index 2502366e845f..f281d16040f5 100644 --- a/drivers/infiniband/hw/ehca/ehca_classes.h +++ b/drivers/infiniband/hw/ehca/ehca_classes.h @@ -183,6 +183,11 @@ struct ehca_qp { u32 mm_count_squeue; u32 mm_count_rqueue; u32 mm_count_galpa; + /* unsolicited ack circumvention */ + int unsol_ack_circ; + int mtu_shift; + u32 message_count; + u32 packet_count; }; #define IS_SRQ(qp) (qp->ext_type == EQPT_SRQ) diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c index 8d3c35fa051b..1012f15a7140 100644 --- a/drivers/infiniband/hw/ehca/ehca_qp.c +++ b/drivers/infiniband/hw/ehca/ehca_qp.c @@ -592,10 +592,8 @@ static struct ehca_qp *internal_create_qp( goto create_qp_exit1; } - if (init_attr->sq_sig_type == IB_SIGNAL_ALL_WR) - parms.sigtype = HCALL_SIGT_EVERY; - else - parms.sigtype = HCALL_SIGT_BY_WQE; + /* Always signal by WQE so we can hide circ. WQEs */ + parms.sigtype = HCALL_SIGT_BY_WQE; /* UD_AV CIRCUMVENTION */ max_send_sge = init_attr->cap.max_send_sge; @@ -618,6 +616,10 @@ static struct ehca_qp *internal_create_qp( parms.squeue.max_sge = max_send_sge; parms.rqueue.max_sge = max_recv_sge; + /* RC QPs need one more SWQE for unsolicited ack circumvention */ + if (qp_type == IB_QPT_RC) + parms.squeue.max_wr++; + if (EHCA_BMASK_GET(HCA_CAP_MINI_QP, shca->hca_cap)) { if (HAS_SQ(my_qp)) ehca_determine_small_queue( @@ -650,6 +652,8 @@ static struct ehca_qp *internal_create_qp( parms.squeue.act_nr_sges = 1; parms.rqueue.act_nr_sges = 1; } + /* hide the extra WQE */ + parms.squeue.act_nr_wqes--; break; case IB_QPT_UD: case IB_QPT_GSI: @@ -1294,6 +1298,8 @@ static int internal_modify_qp(struct ib_qp *ibqp, } if (attr_mask & IB_QP_PATH_MTU) { + /* store ld(MTU) */ + my_qp->mtu_shift = attr->path_mtu + 7; mqpcb->path_mtu = attr->path_mtu; update_mask |= EHCA_BMASK_SET(MQPCB_MASK_PATH_MTU, 1); } diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c index ea91360835d3..3aacc8cf1e44 100644 --- a/drivers/infiniband/hw/ehca/ehca_reqs.c +++ b/drivers/infiniband/hw/ehca/ehca_reqs.c @@ -50,6 +50,9 @@ #include "hcp_if.h" #include "hipz_fns.h" +/* in RC traffic, insert an empty RDMA READ every this many packets */ +#define ACK_CIRC_THRESHOLD 2000000 + static inline int ehca_write_rwqe(struct ipz_queue *ipz_rqueue, struct ehca_wqe *wqe_p, struct ib_recv_wr *recv_wr) @@ -81,7 +84,7 @@ static inline int ehca_write_rwqe(struct ipz_queue *ipz_rqueue, if (ehca_debug_level) { ehca_gen_dbg("RECEIVE WQE written into ipz_rqueue=%p", ipz_rqueue); - ehca_dmp( wqe_p, 16*(6 + wqe_p->nr_of_data_seg), "recv wqe"); + ehca_dmp(wqe_p, 16*(6 + wqe_p->nr_of_data_seg), "recv wqe"); } return 0; @@ -135,7 +138,8 @@ static void trace_send_wr_ud(const struct ib_send_wr *send_wr) static inline int ehca_write_swqe(struct ehca_qp *qp, struct ehca_wqe *wqe_p, - const struct ib_send_wr *send_wr) + const struct ib_send_wr *send_wr, + int hidden) { u32 idx; u64 dma_length; @@ -176,7 +180,9 @@ static inline int ehca_write_swqe(struct ehca_qp *qp, wqe_p->wr_flag = 0; - if (send_wr->send_flags & IB_SEND_SIGNALED) + if ((send_wr->send_flags & IB_SEND_SIGNALED || + qp->init_attr.sq_sig_type == IB_SIGNAL_ALL_WR) + && !hidden) wqe_p->wr_flag |= WQE_WRFLAG_REQ_SIGNAL_COM; if (send_wr->opcode == IB_WR_SEND_WITH_IMM || @@ -199,7 +205,7 @@ static inline int ehca_write_swqe(struct ehca_qp *qp, wqe_p->destination_qp_number = send_wr->wr.ud.remote_qpn << 8; wqe_p->local_ee_context_qkey = remote_qkey; - if (!send_wr->wr.ud.ah) { + if (unlikely(!send_wr->wr.ud.ah)) { ehca_gen_err("wr.ud.ah is NULL. qp=%p", qp); return -EINVAL; } @@ -255,6 +261,15 @@ static inline int ehca_write_swqe(struct ehca_qp *qp, } /* eof idx */ wqe_p->u.nud.atomic_1st_op_dma_len = dma_length; + /* unsolicited ack circumvention */ + if (send_wr->opcode == IB_WR_RDMA_READ) { + /* on RDMA read, switch on and reset counters */ + qp->message_count = qp->packet_count = 0; + qp->unsol_ack_circ = 1; + } else + /* else estimate #packets */ + qp->packet_count += (dma_length >> qp->mtu_shift) + 1; + break; default: @@ -355,13 +370,49 @@ static inline void map_ib_wc_status(u32 cqe_status, *wc_status = IB_WC_SUCCESS; } +static inline int post_one_send(struct ehca_qp *my_qp, + struct ib_send_wr *cur_send_wr, + struct ib_send_wr **bad_send_wr, + int hidden) +{ + struct ehca_wqe *wqe_p; + int ret; + u64 start_offset = my_qp->ipz_squeue.current_q_offset; + + /* get pointer next to free WQE */ + wqe_p = ipz_qeit_get_inc(&my_qp->ipz_squeue); + if (unlikely(!wqe_p)) { + /* too many posted work requests: queue overflow */ + if (bad_send_wr) + *bad_send_wr = cur_send_wr; + ehca_err(my_qp->ib_qp.device, "Too many posted WQEs " + "qp_num=%x", my_qp->ib_qp.qp_num); + return -ENOMEM; + } + /* write a SEND WQE into the QUEUE */ + ret = ehca_write_swqe(my_qp, wqe_p, cur_send_wr, hidden); + /* + * if something failed, + * reset the free entry pointer to the start value + */ + if (unlikely(ret)) { + my_qp->ipz_squeue.current_q_offset = start_offset; + if (bad_send_wr) + *bad_send_wr = cur_send_wr; + ehca_err(my_qp->ib_qp.device, "Could not write WQE " + "qp_num=%x", my_qp->ib_qp.qp_num); + return -EINVAL; + } + + return 0; +} + int ehca_post_send(struct ib_qp *qp, struct ib_send_wr *send_wr, struct ib_send_wr **bad_send_wr) { struct ehca_qp *my_qp = container_of(qp, struct ehca_qp, ib_qp); struct ib_send_wr *cur_send_wr; - struct ehca_wqe *wqe_p; int wqe_cnt = 0; int ret = 0; unsigned long flags; @@ -369,37 +420,33 @@ int ehca_post_send(struct ib_qp *qp, /* LOCK the QUEUE */ spin_lock_irqsave(&my_qp->spinlock_s, flags); + /* Send an empty extra RDMA read if: + * 1) there has been an RDMA read on this connection before + * 2) no RDMA read occurred for ACK_CIRC_THRESHOLD link packets + * 3) we can be sure that any previous extra RDMA read has been + * processed so we don't overflow the SQ + */ + if (unlikely(my_qp->unsol_ack_circ && + my_qp->packet_count > ACK_CIRC_THRESHOLD && + my_qp->message_count > my_qp->init_attr.cap.max_send_wr)) { + /* insert an empty RDMA READ to fix up the remote QP state */ + struct ib_send_wr circ_wr; + memset(&circ_wr, 0, sizeof(circ_wr)); + circ_wr.opcode = IB_WR_RDMA_READ; + post_one_send(my_qp, &circ_wr, NULL, 1); /* ignore retcode */ + wqe_cnt++; + ehca_dbg(qp->device, "posted circ wr qp_num=%x", qp->qp_num); + my_qp->message_count = my_qp->packet_count = 0; + } + /* loop processes list of send reqs */ for (cur_send_wr = send_wr; cur_send_wr != NULL; cur_send_wr = cur_send_wr->next) { - u64 start_offset = my_qp->ipz_squeue.current_q_offset; - /* get pointer next to free WQE */ - wqe_p = ipz_qeit_get_inc(&my_qp->ipz_squeue); - if (unlikely(!wqe_p)) { - /* too many posted work requests: queue overflow */ - if (bad_send_wr) - *bad_send_wr = cur_send_wr; - if (wqe_cnt == 0) { - ret = -ENOMEM; - ehca_err(qp->device, "Too many posted WQEs " - "qp_num=%x", qp->qp_num); - } - goto post_send_exit0; - } - /* write a SEND WQE into the QUEUE */ - ret = ehca_write_swqe(my_qp, wqe_p, cur_send_wr); - /* - * if something failed, - * reset the free entry pointer to the start value - */ + ret = post_one_send(my_qp, cur_send_wr, bad_send_wr, 0); if (unlikely(ret)) { - my_qp->ipz_squeue.current_q_offset = start_offset; - *bad_send_wr = cur_send_wr; - if (wqe_cnt == 0) { - ret = -EINVAL; - ehca_err(qp->device, "Could not write WQE " - "qp_num=%x", qp->qp_num); - } + /* if one or more WQEs were successful, don't fail */ + if (wqe_cnt) + ret = 0; goto post_send_exit0; } wqe_cnt++; @@ -410,6 +457,7 @@ int ehca_post_send(struct ib_qp *qp, post_send_exit0: iosync(); /* serialize GAL register access */ hipz_update_sqa(my_qp, wqe_cnt); + my_qp->message_count += wqe_cnt; spin_unlock_irqrestore(&my_qp->spinlock_s, flags); return ret; } -- cgit v1.2.3-59-g8ed1b From 7387273307139ebf8d7f7fb3bb79d1ca48bd71d6 Mon Sep 17 00:00:00 2001 From: Dave Olson Date: Tue, 8 Jan 2008 23:16:17 -0800 Subject: IB/ipath: Remove unused MDIO interface code This code has been unused for some time, but still had leftovers from when it was used. Signed-off-by: Dave Olson --- drivers/infiniband/hw/ipath/ipath_driver.c | 71 --------------------------- drivers/infiniband/hw/ipath/ipath_iba6110.c | 28 +---------- drivers/infiniband/hw/ipath/ipath_iba6120.c | 26 +--------- drivers/infiniband/hw/ipath/ipath_kernel.h | 29 ----------- drivers/infiniband/hw/ipath/ipath_registers.h | 16 ------ 5 files changed, 2 insertions(+), 168 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c index 5a9dc317f40a..bfcdf8c254c5 100644 --- a/drivers/infiniband/hw/ipath/ipath_driver.c +++ b/drivers/infiniband/hw/ipath/ipath_driver.c @@ -1618,77 +1618,6 @@ bail: return ret; } -int ipath_waitfor_complete(struct ipath_devdata *dd, ipath_kreg reg_id, - u64 bits_to_wait_for, u64 * valp) -{ - unsigned long timeout; - u64 lastval, val; - int ret; - - lastval = ipath_read_kreg64(dd, reg_id); - /* wait a ridiculously long time */ - timeout = jiffies + msecs_to_jiffies(5); - do { - val = ipath_read_kreg64(dd, reg_id); - /* set so they have something, even on failures. */ - *valp = val; - if ((val & bits_to_wait_for) == bits_to_wait_for) { - ret = 0; - break; - } - if (val != lastval) - ipath_cdbg(VERBOSE, "Changed from %llx to %llx, " - "waiting for %llx bits\n", - (unsigned long long) lastval, - (unsigned long long) val, - (unsigned long long) bits_to_wait_for); - cond_resched(); - if (time_after(jiffies, timeout)) { - ipath_dbg("Didn't get bits %llx in register 0x%x, " - "got %llx\n", - (unsigned long long) bits_to_wait_for, - reg_id, (unsigned long long) *valp); - ret = -ENODEV; - break; - } - } while (1); - - return ret; -} - -/** - * ipath_waitfor_mdio_cmdready - wait for last command to complete - * @dd: the infinipath device - * - * Like ipath_waitfor_complete(), but we wait for the CMDVALID bit to go - * away indicating the last command has completed. It doesn't return data - */ -int ipath_waitfor_mdio_cmdready(struct ipath_devdata *dd) -{ - unsigned long timeout; - u64 val; - int ret; - - /* wait a ridiculously long time */ - timeout = jiffies + msecs_to_jiffies(5); - do { - val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_mdio); - if (!(val & IPATH_MDIO_CMDVALID)) { - ret = 0; - break; - } - cond_resched(); - if (time_after(jiffies, timeout)) { - ipath_dbg("CMDVALID stuck in mdio reg? (%llx)\n", - (unsigned long long) val); - ret = -ENODEV; - break; - } - } while (1); - - return ret; -} - /* * Flush all sends that might be in the ready to send state, as well as any diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c index 6976d96f6ce1..ac436c630bcc 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6110.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c @@ -1274,8 +1274,7 @@ static void ipath_ht_init_hwerrors(struct ipath_devdata *dd) val &= ~INFINIPATH_HWE_HTCMISCERR4; /* - * PLL ignored because MDIO interface has a logic problem - * for reads, on Comstock and Ponderosa. BRINGUP + * PLL ignored because unused MDIO interface has a logic problem */ if (dd->ipath_boardrev == 4 || dd->ipath_boardrev == 9) val &= ~INFINIPATH_HWE_SERDESPLLFAILED; @@ -1353,16 +1352,6 @@ static int ipath_ht_bringup_serdes(struct ipath_devdata *dd) } val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig); - if (((val >> INFINIPATH_XGXS_MDIOADDR_SHIFT) & - INFINIPATH_XGXS_MDIOADDR_MASK) != 3) { - val &= ~(INFINIPATH_XGXS_MDIOADDR_MASK << - INFINIPATH_XGXS_MDIOADDR_SHIFT); - /* - * we use address 3 - */ - val |= 3ULL << INFINIPATH_XGXS_MDIOADDR_SHIFT; - change = 1; - } if (val & INFINIPATH_XGXS_RESET) { /* normally true after boot */ val &= ~INFINIPATH_XGXS_RESET; @@ -1398,21 +1387,6 @@ static int ipath_ht_bringup_serdes(struct ipath_devdata *dd) (unsigned long long) ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig)); - if (!ipath_waitfor_mdio_cmdready(dd)) { - ipath_write_kreg(dd, dd->ipath_kregs->kr_mdio, - ipath_mdio_req(IPATH_MDIO_CMD_READ, 31, - IPATH_MDIO_CTRL_XGXS_REG_8, - 0)); - if (ipath_waitfor_complete(dd, dd->ipath_kregs->kr_mdio, - IPATH_MDIO_DATAVALID, &val)) - ipath_dbg("Never got MDIO data for XGXS status " - "read\n"); - else - ipath_cdbg(VERBOSE, "MDIO Read reg8, " - "'bank' 31 %x\n", (u32) val); - } else - ipath_dbg("Never got MDIO cmdready for XGXS status read\n"); - return ret; /* for now, say we always succeeded */ } diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c index 066a8ea4b4df..57915fd718e2 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6120.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c @@ -725,17 +725,8 @@ static int ipath_pe_bringup_serdes(struct ipath_devdata *dd) val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig); prev_val = val; - if (((val >> INFINIPATH_XGXS_MDIOADDR_SHIFT) & - INFINIPATH_XGXS_MDIOADDR_MASK) != 3) { - val &= - ~(INFINIPATH_XGXS_MDIOADDR_MASK << - INFINIPATH_XGXS_MDIOADDR_SHIFT); - /* MDIO address 3 */ - val |= 3ULL << INFINIPATH_XGXS_MDIOADDR_SHIFT; - } - if (val & INFINIPATH_XGXS_RESET) { + if (val & INFINIPATH_XGXS_RESET) val &= ~INFINIPATH_XGXS_RESET; - } if (((val >> INFINIPATH_XGXS_RX_POL_SHIFT) & INFINIPATH_XGXS_RX_POL_MASK) != dd->ipath_rx_pol_inv ) { /* need to compensate for Tx inversion in partner */ @@ -765,21 +756,6 @@ static int ipath_pe_bringup_serdes(struct ipath_devdata *dd) (unsigned long long) ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig)); - if (!ipath_waitfor_mdio_cmdready(dd)) { - ipath_write_kreg( - dd, dd->ipath_kregs->kr_mdio, - ipath_mdio_req(IPATH_MDIO_CMD_READ, 31, - IPATH_MDIO_CTRL_XGXS_REG_8, 0)); - if (ipath_waitfor_complete(dd, dd->ipath_kregs->kr_mdio, - IPATH_MDIO_DATAVALID, &val)) - ipath_dbg("Never got MDIO data for XGXS " - "status read\n"); - else - ipath_cdbg(VERBOSE, "MDIO Read reg8, " - "'bank' 31 %x\n", (u32) val); - } else - ipath_dbg("Never got MDIO cmdready for XGXS status read\n"); - return ret; } diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h index c47290422457..c0ecda35f2d9 100644 --- a/drivers/infiniband/hw/ipath/ipath_kernel.h +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -777,8 +777,6 @@ int ipath_set_rx_pol_inv(struct ipath_devdata *dd, u8 new_pol_inv); /* free up any allocated data at closes */ void ipath_free_data(struct ipath_portdata *dd); -int ipath_waitfor_mdio_cmdready(struct ipath_devdata *); -int ipath_waitfor_complete(struct ipath_devdata *, ipath_kreg, u64, u64 *); u32 __iomem *ipath_getpiobuf(struct ipath_devdata *, u32 *); void ipath_init_iba6120_funcs(struct ipath_devdata *); void ipath_init_iba6110_funcs(struct ipath_devdata *); @@ -802,33 +800,6 @@ void ipath_set_led_override(struct ipath_devdata *dd, unsigned int val); */ #define IPATH_DFLT_RCVHDRSIZE 9 -#define IPATH_MDIO_CMD_WRITE 1 -#define IPATH_MDIO_CMD_READ 2 -#define IPATH_MDIO_CLD_DIV 25 /* to get 2.5 Mhz mdio clock */ -#define IPATH_MDIO_CMDVALID 0x40000000 /* bit 30 */ -#define IPATH_MDIO_DATAVALID 0x80000000 /* bit 31 */ -#define IPATH_MDIO_CTRL_STD 0x0 - -static inline u64 ipath_mdio_req(int cmd, int dev, int reg, int data) -{ - return (((u64) IPATH_MDIO_CLD_DIV) << 32) | - (cmd << 26) | - (dev << 21) | - (reg << 16) | - (data & 0xFFFF); -} - - /* signal and fifo status, in bank 31 */ -#define IPATH_MDIO_CTRL_XGXS_REG_8 0x8 - /* controls loopback, redundancy */ -#define IPATH_MDIO_CTRL_8355_REG_1 0x10 - /* premph, encdec, etc. */ -#define IPATH_MDIO_CTRL_8355_REG_2 0x11 - /* Kchars, etc. */ -#define IPATH_MDIO_CTRL_8355_REG_6 0x15 -#define IPATH_MDIO_CTRL_8355_REG_9 0x18 -#define IPATH_MDIO_CTRL_8355_REG_10 0x1D - int ipath_get_user_pages(unsigned long, size_t, struct page **); void ipath_release_user_pages(struct page **, size_t); void ipath_release_user_pages_on_close(struct page **, size_t); diff --git a/drivers/infiniband/hw/ipath/ipath_registers.h b/drivers/infiniband/hw/ipath/ipath_registers.h index 156ef1473466..6d2a17f9c1da 100644 --- a/drivers/infiniband/hw/ipath/ipath_registers.h +++ b/drivers/infiniband/hw/ipath/ipath_registers.h @@ -271,20 +271,6 @@ #define INFINIPATH_EXTC_LEDGBLOK_ON 0x00000002ULL #define INFINIPATH_EXTC_LEDGBLERR_OFF 0x00000001ULL -/* kr_mdio bits */ -#define INFINIPATH_MDIO_CLKDIV_MASK 0x7FULL -#define INFINIPATH_MDIO_CLKDIV_SHIFT 32 -#define INFINIPATH_MDIO_COMMAND_MASK 0x7ULL -#define INFINIPATH_MDIO_COMMAND_SHIFT 26 -#define INFINIPATH_MDIO_DEVADDR_MASK 0x1FULL -#define INFINIPATH_MDIO_DEVADDR_SHIFT 21 -#define INFINIPATH_MDIO_REGADDR_MASK 0x1FULL -#define INFINIPATH_MDIO_REGADDR_SHIFT 16 -#define INFINIPATH_MDIO_DATA_MASK 0xFFFFULL -#define INFINIPATH_MDIO_DATA_SHIFT 0 -#define INFINIPATH_MDIO_CMDVALID 0x0000000040000000ULL -#define INFINIPATH_MDIO_RDDATAVALID 0x0000000080000000ULL - /* kr_partitionkey bits */ #define INFINIPATH_PKEY_SIZE 16 #define INFINIPATH_PKEY_MASK 0xFFFF @@ -302,8 +288,6 @@ /* kr_xgxsconfig bits */ #define INFINIPATH_XGXS_RESET 0x7ULL -#define INFINIPATH_XGXS_MDIOADDR_MASK 0xfULL -#define INFINIPATH_XGXS_MDIOADDR_SHIFT 4 #define INFINIPATH_XGXS_RX_POL_SHIFT 19 #define INFINIPATH_XGXS_RX_POL_MASK 0xfULL -- cgit v1.2.3-59-g8ed1b From c4bce8032ef4368063c84d665b19804878d63e7c Mon Sep 17 00:00:00 2001 From: Dave Olson Date: Tue, 8 Jan 2008 02:36:46 -0800 Subject: IB/ipath: Add new chip-specific functions to older chips, consistent init This adds the new (sometimes empty) chip-specific functions to the older chips, and makes the initialization and related functions consistent across all 3 chips. Signed-off-by: Dave Olson Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_common.h | 10 ++ drivers/infiniband/hw/ipath/ipath_iba6110.c | 172 +++++++++++++++++++++++++--- drivers/infiniband/hw/ipath/ipath_iba6120.c | 163 ++++++++++++++++++++++++-- drivers/infiniband/hw/ipath/ipath_kernel.h | 88 +++++++++++++- 4 files changed, 407 insertions(+), 26 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_common.h b/drivers/infiniband/hw/ipath/ipath_common.h index aa780e7f2418..0fa43ba25b7e 100644 --- a/drivers/infiniband/hw/ipath/ipath_common.h +++ b/drivers/infiniband/hw/ipath/ipath_common.h @@ -81,6 +81,16 @@ #define IPATH_IB_LINK_LOOPBACK 6 /* enable local loopback */ #define IPATH_IB_LINK_EXTERNAL 7 /* normal, disable local loopback */ +/* + * These 3 values (SDR and DDR may be ORed for auto-speed + * negotiation) are used for the 3rd argument to path_f_set_ib_cfg + * with cmd IPATH_IB_CFG_SPD_ENB, by direct calls or via sysfs. They + * are also the the possible values for ipath_link_speed_enabled and active + * The values were chosen to match values used within the IB spec. + */ +#define IPATH_IB_SDR 1 +#define IPATH_IB_DDR 2 + /* * stats maintained by the driver. For now, at least, this is global * to all minor devices. diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c index ac436c630bcc..9e2ced3cdc5e 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6110.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c @@ -329,6 +329,9 @@ static const struct ipath_cregs ipath_ht_cregs = { #define INFINIPATH_HWE_HTAPLL_RFSLIP 0x1000000000000000ULL #define INFINIPATH_HWE_SERDESPLLFAILED 0x2000000000000000ULL +#define IBA6110_IBCS_LINKTRAININGSTATE_MASK 0xf +#define IBA6110_IBCS_LINKSTATE_SHIFT 4 + /* kr_extstatus bits */ #define INFINIPATH_EXTS_FREQSEL 0x2 #define INFINIPATH_EXTS_SERDESSEL 0x4 @@ -705,7 +708,6 @@ static int ipath_ht_boardname(struct ipath_devdata *dd, char *name, "with ID %u\n", boardrev); snprintf(name, namelen, "Unknown_InfiniPath_QHT7xxx_%u", boardrev); - ret = 1; break; } if (n) @@ -1137,11 +1139,49 @@ static void ipath_setup_ht_setextled(struct ipath_devdata *dd, static void ipath_init_ht_variables(struct ipath_devdata *dd) { + /* + * setup the register offsets, since they are different for each + * chip + */ + dd->ipath_kregs = &ipath_ht_kregs; + dd->ipath_cregs = &ipath_ht_cregs; + dd->ipath_gpio_sda_num = _IPATH_GPIO_SDA_NUM; dd->ipath_gpio_scl_num = _IPATH_GPIO_SCL_NUM; dd->ipath_gpio_sda = IPATH_GPIO_SDA; dd->ipath_gpio_scl = IPATH_GPIO_SCL; + /* + * Fill in data for field-values that change in newer chips. + * We dynamically specify only the mask for LINKTRAININGSTATE + * and only the shift for LINKSTATE, as they are the only ones + * that change. Also precalculate the 3 link states of interest + * and the combined mask. + */ + dd->ibcs_ls_shift = IBA6110_IBCS_LINKSTATE_SHIFT; + dd->ibcs_lts_mask = IBA6110_IBCS_LINKTRAININGSTATE_MASK; + dd->ibcs_mask = (INFINIPATH_IBCS_LINKSTATE_MASK << + dd->ibcs_ls_shift) | dd->ibcs_lts_mask; + dd->ib_init = (INFINIPATH_IBCS_LT_STATE_LINKUP << + INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) | + (INFINIPATH_IBCS_L_STATE_INIT << dd->ibcs_ls_shift); + dd->ib_arm = (INFINIPATH_IBCS_LT_STATE_LINKUP << + INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) | + (INFINIPATH_IBCS_L_STATE_ARM << dd->ibcs_ls_shift); + dd->ib_active = (INFINIPATH_IBCS_LT_STATE_LINKUP << + INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) | + (INFINIPATH_IBCS_L_STATE_ACTIVE << dd->ibcs_ls_shift); + + /* + * Fill in data for ibcc field-values that change in newer chips. + * We dynamically specify only the mask for LINKINITCMD + * and only the shift for LINKCMD and MAXPKTLEN, as they are + * the only ones that change. + */ + dd->ibcc_lic_mask = INFINIPATH_IBCC_LINKINITCMD_MASK; + dd->ibcc_lc_shift = INFINIPATH_IBCC_LINKCMD_SHIFT; + dd->ibcc_mpl_shift = INFINIPATH_IBCC_MAXPKTLEN_SHIFT; + /* Fill in shifts for RcvCtrl. */ dd->ipath_r_portenable_shift = INFINIPATH_R_PORTENABLE_SHIFT; dd->ipath_r_intravail_shift = INFINIPATH_R_INTRAVAIL_SHIFT; @@ -1204,6 +1244,8 @@ static void ipath_init_ht_variables(struct ipath_devdata *dd) dd->ipath_i_rcvavail_mask = INFINIPATH_I_RCVAVAIL_MASK; dd->ipath_i_rcvurg_mask = INFINIPATH_I_RCVURG_MASK; + dd->ipath_i_rcvavail_shift = INFINIPATH_I_RCVAVAIL_SHIFT; + dd->ipath_i_rcvurg_shift = INFINIPATH_I_RCVURG_SHIFT; /* * EEPROM error log 0 is TXE Parity errors. 1 is RXE Parity. @@ -1217,9 +1259,17 @@ static void ipath_init_ht_variables(struct ipath_devdata *dd) INFINIPATH_HWE_RXEMEMPARITYERR_MASK << INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT; - dd->ipath_eep_st_masks[2].errs_to_log = - INFINIPATH_E_INVALIDADDR | INFINIPATH_E_RESET; + dd->ipath_eep_st_masks[2].errs_to_log = INFINIPATH_E_RESET; + dd->delay_mult = 2; /* SDR, 4X, can't change */ + + dd->ipath_link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X; + dd->ipath_link_speed_supported = IPATH_IB_SDR; + dd->ipath_link_width_enabled = IB_WIDTH_4X; + dd->ipath_link_speed_enabled = dd->ipath_link_speed_supported; + /* these can't change for this chip, so set once */ + dd->ipath_link_width_active = dd->ipath_link_width_enabled; + dd->ipath_link_speed_active = dd->ipath_link_speed_enabled; } /** @@ -1281,6 +1331,9 @@ static void ipath_ht_init_hwerrors(struct ipath_devdata *dd) dd->ipath_hwerrmask = val; } + + + /** * ipath_ht_bringup_serdes - bring up the serdes * @dd: the infinipath device @@ -1439,6 +1492,7 @@ static void ipath_ht_put_tid(struct ipath_devdata *dd, pa |= lenvalid | INFINIPATH_RT_VALID; } } + writeq(pa, tidptr); } @@ -1644,6 +1698,13 @@ static void ipath_ht_free_irq(struct ipath_devdata *dd) dd->ipath_intconfig = 0; } +static struct ipath_message_header * +ipath_ht_get_msgheader(struct ipath_devdata *dd, __le32 *rhf_addr) +{ + return (struct ipath_message_header *) + &rhf_addr[sizeof(u64) / sizeof(u32)]; +} + static void ipath_ht_config_ports(struct ipath_devdata *dd, ushort cfgports) { dd->ipath_portcnt = @@ -1757,6 +1818,90 @@ static void ipath_ht_read_counters(struct ipath_devdata *dd, cntrs->RxDlidFltrCnt = 0; } + +/* no interrupt fallback for these chips */ +static int ipath_ht_nointr_fallback(struct ipath_devdata *dd) +{ + return 0; +} + + +/* + * reset the XGXS (between serdes and IBC). Slightly less intrusive + * than resetting the IBC or external link state, and useful in some + * cases to cause some retraining. To do this right, we reset IBC + * as well. + */ +static void ipath_ht_xgxs_reset(struct ipath_devdata *dd) +{ + u64 val, prev_val; + + prev_val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig); + val = prev_val | INFINIPATH_XGXS_RESET; + prev_val &= ~INFINIPATH_XGXS_RESET; /* be sure */ + ipath_write_kreg(dd, dd->ipath_kregs->kr_control, + dd->ipath_control & ~INFINIPATH_C_LINKENABLE); + ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val); + ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch); + ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, prev_val); + ipath_write_kreg(dd, dd->ipath_kregs->kr_control, + dd->ipath_control); +} + + +static int ipath_ht_get_ib_cfg(struct ipath_devdata *dd, int which) +{ + int ret; + + switch (which) { + case IPATH_IB_CFG_LWID: + ret = dd->ipath_link_width_active; + break; + case IPATH_IB_CFG_SPD: + ret = dd->ipath_link_speed_active; + break; + case IPATH_IB_CFG_LWID_ENB: + ret = dd->ipath_link_width_enabled; + break; + case IPATH_IB_CFG_SPD_ENB: + ret = dd->ipath_link_speed_enabled; + break; + default: + ret = -ENOTSUPP; + break; + } + return ret; +} + + +/* we assume range checking is already done, if needed */ +static int ipath_ht_set_ib_cfg(struct ipath_devdata *dd, int which, u32 val) +{ + int ret = 0; + + if (which == IPATH_IB_CFG_LWID_ENB) + dd->ipath_link_width_enabled = val; + else if (which == IPATH_IB_CFG_SPD_ENB) + dd->ipath_link_speed_enabled = val; + else + ret = -ENOTSUPP; + return ret; +} + + +static void ipath_ht_config_jint(struct ipath_devdata *dd, u16 a, u16 b) +{ +} + + +static int ipath_ht_ib_updown(struct ipath_devdata *dd, int ibup, u64 ibcs) +{ + ipath_setup_ht_setextled(dd, ipath_ib_linkstate(dd, ibcs), + ipath_ib_linktrstate(dd, ibcs)); + return 0; +} + + /** * ipath_init_iba6110_funcs - set up the chip-specific function pointers * @dd: the infinipath device @@ -1781,24 +1926,19 @@ void ipath_init_iba6110_funcs(struct ipath_devdata *dd) dd->ipath_f_setextled = ipath_setup_ht_setextled; dd->ipath_f_get_base_info = ipath_ht_get_base_info; dd->ipath_f_free_irq = ipath_ht_free_irq; + dd->ipath_f_tidtemplate = ipath_ht_tidtemplate; + dd->ipath_f_intr_fallback = ipath_ht_nointr_fallback; + dd->ipath_f_get_msgheader = ipath_ht_get_msgheader; dd->ipath_f_config_ports = ipath_ht_config_ports; dd->ipath_f_read_counters = ipath_ht_read_counters; + dd->ipath_f_xgxs_reset = ipath_ht_xgxs_reset; + dd->ipath_f_get_ib_cfg = ipath_ht_get_ib_cfg; + dd->ipath_f_set_ib_cfg = ipath_ht_set_ib_cfg; + dd->ipath_f_config_jint = ipath_ht_config_jint; + dd->ipath_f_ib_updown = ipath_ht_ib_updown; /* * initialize chip-specific variables */ - dd->ipath_f_tidtemplate = ipath_ht_tidtemplate; - - /* - * setup the register offsets, since they are different for each - * chip - */ - dd->ipath_kregs = &ipath_ht_kregs; - dd->ipath_cregs = &ipath_ht_cregs; - - /* - * do very early init that is needed before ipath_f_bus is - * called - */ ipath_init_ht_variables(dd); } diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c index 57915fd718e2..597192e912de 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6120.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c @@ -329,6 +329,9 @@ static const struct ipath_cregs ipath_pe_cregs = { #define INFINIPATH_HWE_PCIE0PLLFAILED 0x0800000000000000ULL #define INFINIPATH_HWE_SERDESPLLFAILED 0x1000000000000000ULL +#define IBA6120_IBCS_LINKTRAININGSTATE_MASK 0xf +#define IBA6120_IBCS_LINKSTATE_SHIFT 4 + /* kr_extstatus bits */ #define INFINIPATH_EXTS_FREQSEL 0x2 #define INFINIPATH_EXTS_SERDESSEL 0x4 @@ -936,11 +939,26 @@ static int ipath_setup_pe_config(struct ipath_devdata *dd, else ipath_dev_err(dd, "Can't find PCI Express " "capability!\n"); + + dd->ipath_link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X; + dd->ipath_link_speed_supported = IPATH_IB_SDR; + dd->ipath_link_width_enabled = IB_WIDTH_4X; + dd->ipath_link_speed_enabled = dd->ipath_link_speed_supported; + /* these can't change for this chip, so set once */ + dd->ipath_link_width_active = dd->ipath_link_width_enabled; + dd->ipath_link_speed_active = dd->ipath_link_speed_enabled; return 0; } static void ipath_init_pe_variables(struct ipath_devdata *dd) { + /* + * setup the register offsets, since they are different for each + * chip + */ + dd->ipath_kregs = &ipath_pe_kregs; + dd->ipath_cregs = &ipath_pe_cregs; + /* * bits for selecting i2c direction and values, * used for I2C serial flash @@ -950,6 +968,37 @@ static void ipath_init_pe_variables(struct ipath_devdata *dd) dd->ipath_gpio_sda = IPATH_GPIO_SDA; dd->ipath_gpio_scl = IPATH_GPIO_SCL; + /* + * Fill in data for field-values that change in newer chips. + * We dynamically specify only the mask for LINKTRAININGSTATE + * and only the shift for LINKSTATE, as they are the only ones + * that change. Also precalculate the 3 link states of interest + * and the combined mask. + */ + dd->ibcs_ls_shift = IBA6120_IBCS_LINKSTATE_SHIFT; + dd->ibcs_lts_mask = IBA6120_IBCS_LINKTRAININGSTATE_MASK; + dd->ibcs_mask = (INFINIPATH_IBCS_LINKSTATE_MASK << + dd->ibcs_ls_shift) | dd->ibcs_lts_mask; + dd->ib_init = (INFINIPATH_IBCS_LT_STATE_LINKUP << + INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) | + (INFINIPATH_IBCS_L_STATE_INIT << dd->ibcs_ls_shift); + dd->ib_arm = (INFINIPATH_IBCS_LT_STATE_LINKUP << + INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) | + (INFINIPATH_IBCS_L_STATE_ARM << dd->ibcs_ls_shift); + dd->ib_active = (INFINIPATH_IBCS_LT_STATE_LINKUP << + INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) | + (INFINIPATH_IBCS_L_STATE_ACTIVE << dd->ibcs_ls_shift); + + /* + * Fill in data for ibcc field-values that change in newer chips. + * We dynamically specify only the mask for LINKINITCMD + * and only the shift for LINKCMD and MAXPKTLEN, as they are + * the only ones that change. + */ + dd->ibcc_lic_mask = INFINIPATH_IBCC_LINKINITCMD_MASK; + dd->ibcc_lc_shift = INFINIPATH_IBCC_LINKCMD_SHIFT; + dd->ibcc_mpl_shift = INFINIPATH_IBCC_MAXPKTLEN_SHIFT; + /* Fill in shifts for RcvCtrl. */ dd->ipath_r_portenable_shift = INFINIPATH_R_PORTENABLE_SHIFT; dd->ipath_r_intravail_shift = INFINIPATH_R_INTRAVAIL_SHIFT; @@ -1003,6 +1052,8 @@ static void ipath_init_pe_variables(struct ipath_devdata *dd) dd->ipath_i_rcvavail_mask = INFINIPATH_I_RCVAVAIL_MASK; dd->ipath_i_rcvurg_mask = INFINIPATH_I_RCVURG_MASK; + dd->ipath_i_rcvavail_shift = INFINIPATH_I_RCVAVAIL_SHIFT; + dd->ipath_i_rcvurg_shift = INFINIPATH_I_RCVURG_SHIFT; /* * EEPROM error log 0 is TXE Parity errors. 1 is RXE Parity. @@ -1024,6 +1075,7 @@ static void ipath_init_pe_variables(struct ipath_devdata *dd) INFINIPATH_E_INVALIDADDR | INFINIPATH_E_RESET; + dd->delay_mult = 2; /* SDR, 4X, can't change */ } /* setup the MSI stuff again after a reset. I'd like to just call @@ -1329,6 +1381,9 @@ static int ipath_pe_early_init(struct ipath_devdata *dd) */ dd->ipath_rcvhdrentsize = 24; dd->ipath_rcvhdrsize = IPATH_DFLT_RCVHDRSIZE; + dd->ipath_rhf_offset = 0; + dd->ipath_egrtidbase = (u64 __iomem *) + ((char __iomem *) dd->ipath_kregbase + dd->ipath_rcvegrbase); /* * To truly support a 4KB MTU (for usermode), we need to @@ -1399,6 +1454,14 @@ static void ipath_pe_free_irq(struct ipath_devdata *dd) dd->ipath_irq = 0; } + +static struct ipath_message_header * +ipath_pe_get_msgheader(struct ipath_devdata *dd, __le32 *rhf_addr) +{ + return (struct ipath_message_header *) + &rhf_addr[sizeof(u64) / sizeof(u32)]; +} + static void ipath_pe_config_ports(struct ipath_devdata *dd, ushort cfgports) { dd->ipath_portcnt = @@ -1534,6 +1597,88 @@ static int ipath_pe_txe_recover(struct ipath_devdata *dd) return 1; } +/* no interrupt fallback for these chips */ +static int ipath_pe_nointr_fallback(struct ipath_devdata *dd) +{ + return 0; +} + + +/* + * reset the XGXS (between serdes and IBC). Slightly less intrusive + * than resetting the IBC or external link state, and useful in some + * cases to cause some retraining. To do this right, we reset IBC + * as well. + */ +static void ipath_pe_xgxs_reset(struct ipath_devdata *dd) +{ + u64 val, prev_val; + + prev_val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig); + val = prev_val | INFINIPATH_XGXS_RESET; + prev_val &= ~INFINIPATH_XGXS_RESET; /* be sure */ + ipath_write_kreg(dd, dd->ipath_kregs->kr_control, + dd->ipath_control & ~INFINIPATH_C_LINKENABLE); + ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val); + ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch); + ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, prev_val); + ipath_write_kreg(dd, dd->ipath_kregs->kr_control, + dd->ipath_control); +} + + +static int ipath_pe_get_ib_cfg(struct ipath_devdata *dd, int which) +{ + int ret; + + switch (which) { + case IPATH_IB_CFG_LWID: + ret = dd->ipath_link_width_active; + break; + case IPATH_IB_CFG_SPD: + ret = dd->ipath_link_speed_active; + break; + case IPATH_IB_CFG_LWID_ENB: + ret = dd->ipath_link_width_enabled; + break; + case IPATH_IB_CFG_SPD_ENB: + ret = dd->ipath_link_speed_enabled; + break; + default: + ret = -ENOTSUPP; + break; + } + return ret; +} + + +/* we assume range checking is already done, if needed */ +static int ipath_pe_set_ib_cfg(struct ipath_devdata *dd, int which, u32 val) +{ + int ret = 0; + + if (which == IPATH_IB_CFG_LWID_ENB) + dd->ipath_link_width_enabled = val; + else if (which == IPATH_IB_CFG_SPD_ENB) + dd->ipath_link_speed_enabled = val; + else + ret = -ENOTSUPP; + return ret; +} + +static void ipath_pe_config_jint(struct ipath_devdata *dd, u16 a, u16 b) +{ +} + + +static int ipath_pe_ib_updown(struct ipath_devdata *dd, int ibup, u64 ibcs) +{ + ipath_setup_pe_setextled(dd, ipath_ib_linkstate(dd, ibcs), + ipath_ib_linktrstate(dd, ibcs)); + return 0; +} + + /** * ipath_init_iba6120_funcs - set up the chip-specific function pointers * @dd: the infinipath device @@ -1554,7 +1699,7 @@ void ipath_init_iba6120_funcs(struct ipath_devdata *dd) dd->ipath_f_bringup_serdes = ipath_pe_bringup_serdes; dd->ipath_f_clear_tids = ipath_pe_clear_tids; /* - * this may get changed after we read the chip revision, + * _f_put_tid may get changed after we read the chip revision, * but we start with the safe version for all revs */ dd->ipath_f_put_tid = ipath_pe_put_tid; @@ -1562,19 +1707,19 @@ void ipath_init_iba6120_funcs(struct ipath_devdata *dd) dd->ipath_f_setextled = ipath_setup_pe_setextled; dd->ipath_f_get_base_info = ipath_pe_get_base_info; dd->ipath_f_free_irq = ipath_pe_free_irq; - - /* initialize chip-specific variables */ dd->ipath_f_tidtemplate = ipath_pe_tidtemplate; + dd->ipath_f_intr_fallback = ipath_pe_nointr_fallback; + dd->ipath_f_xgxs_reset = ipath_pe_xgxs_reset; + dd->ipath_f_get_msgheader = ipath_pe_get_msgheader; dd->ipath_f_config_ports = ipath_pe_config_ports; dd->ipath_f_read_counters = ipath_pe_read_counters; + dd->ipath_f_get_ib_cfg = ipath_pe_get_ib_cfg; + dd->ipath_f_set_ib_cfg = ipath_pe_set_ib_cfg; + dd->ipath_f_config_jint = ipath_pe_config_jint; + dd->ipath_f_ib_updown = ipath_pe_ib_updown; - /* - * setup the register offsets, since they are different for each - * chip - */ - dd->ipath_kregs = &ipath_pe_kregs; - dd->ipath_cregs = &ipath_pe_cregs; + /* initialize chip-specific variables */ ipath_init_pe_variables(dd); } diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h index c0ecda35f2d9..6a5fe0157330 100644 --- a/drivers/infiniband/hw/ipath/ipath_kernel.h +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -191,6 +191,22 @@ struct ipath_skbinfo { dma_addr_t phys; }; +/* + * Possible IB config parameters for ipath_f_get/set_ib_cfg() + */ +#define IPATH_IB_CFG_LIDLMC 0 /* Get/set LID (LS16b) and Mask (MS16b) */ +#define IPATH_IB_CFG_HRTBT 1 /* Get/set Heartbeat off/enable/auto */ +#define IPATH_IB_HRTBT_ON 3 /* Heartbeat enabled, sent every 100msec */ +#define IPATH_IB_HRTBT_OFF 0 /* Heartbeat off */ +#define IPATH_IB_CFG_LWID_ENB 2 /* Get/set allowed Link-width */ +#define IPATH_IB_CFG_LWID 3 /* Get currently active Link-width */ +#define IPATH_IB_CFG_SPD_ENB 4 /* Get/set allowed Link speeds */ +#define IPATH_IB_CFG_SPD 5 /* Get current Link spd */ +#define IPATH_IB_CFG_RXPOL_ENB 6 /* Get/set Auto-RX-polarity enable */ +#define IPATH_IB_CFG_LREV_ENB 7 /* Get/set Auto-Lane-reversal enable */ +#define IPATH_IB_CFG_LINKLATENCY 8 /* Get Auto-Lane-reversal enable */ + + struct ipath_devdata { struct list_head ipath_list; @@ -231,6 +247,8 @@ struct ipath_devdata { struct _ipath_layer ipath_layer; /* setup intr */ int (*ipath_f_intrsetup)(struct ipath_devdata *); + /* fallback to alternate interrupt type if possible */ + int (*ipath_f_intr_fallback)(struct ipath_devdata *); /* setup on-chip bus config */ int (*ipath_f_bus)(struct ipath_devdata *, struct pci_dev *); /* hard reset chip */ @@ -253,9 +271,18 @@ struct ipath_devdata { int (*ipath_f_get_base_info)(struct ipath_portdata *, void *); /* free irq */ void (*ipath_f_free_irq)(struct ipath_devdata *); + struct ipath_message_header *(*ipath_f_get_msgheader) + (struct ipath_devdata *, __le32 *); void (*ipath_f_config_ports)(struct ipath_devdata *, ushort); + int (*ipath_f_get_ib_cfg)(struct ipath_devdata *, int); + int (*ipath_f_set_ib_cfg)(struct ipath_devdata *, int, u32); + void (*ipath_f_config_jint)(struct ipath_devdata *, u16 , u16); void (*ipath_f_read_counters)(struct ipath_devdata *, - struct infinipath_counters *); + struct infinipath_counters *); + void (*ipath_f_xgxs_reset)(struct ipath_devdata *); + /* per chip actions needed for IB Link up/down changes */ + int (*ipath_f_ib_updown)(struct ipath_devdata *, int, u64); + struct ipath_ibdev *verbs_dev; struct timer_list verbs_timer; /* total dwords sent (summed from counter) */ @@ -375,6 +402,7 @@ struct ipath_devdata { struct page **ipath_pageshadow; /* shadow copy of dma handles for exp tid pages */ dma_addr_t *ipath_physshadow; + u64 __iomem *ipath_egrtidbase; /* lock to workaround chip bug 9437 */ spinlock_t ipath_tid_lock; spinlock_t ipath_sendctrl_lock; @@ -565,6 +593,14 @@ struct ipath_devdata { u8 ipath_pci_cacheline; /* LID mask control */ u8 ipath_lmc; + /* link width supported */ + u8 ipath_link_width_supported; + /* link speed supported */ + u8 ipath_link_speed_supported; + u8 ipath_link_width_enabled; + u8 ipath_link_speed_enabled; + u8 ipath_link_width_active; + u8 ipath_link_speed_active; /* Rx Polarity inversion (compensate for ~tx on partner) */ u8 ipath_rx_pol_inv; @@ -599,6 +635,8 @@ struct ipath_devdata { */ u32 ipath_i_rcvavail_mask; u32 ipath_i_rcvurg_mask; + u16 ipath_i_rcvurg_shift; + u16 ipath_i_rcvavail_shift; /* * Register bits for selecting i2c direction and values, used for @@ -612,6 +650,29 @@ struct ipath_devdata { /* lock for doing RMW of shadows/regs for ExtCtrl and GPIO */ spinlock_t ipath_gpio_lock; + /* + * IB link and linktraining states and masks that vary per chip in + * some way. Set at init, to avoid each IB status change interrupt + */ + u8 ibcs_ls_shift; + u8 ibcs_lts_mask; + u32 ibcs_mask; + u32 ib_init; + u32 ib_arm; + u32 ib_active; + + u16 ipath_rhf_offset; /* offset of RHF within receive header entry */ + + /* + * shift/mask for linkcmd, linkinitcmd, maxpktlen in ibccontol + * reg. Changes for IBA7220 + */ + u8 ibcc_lic_mask; /* LinkInitCmd */ + u8 ibcc_lc_shift; /* LinkCmd */ + u8 ibcc_mpl_shift; /* Maxpktlen */ + + u8 delay_mult; + /* used to override LED behavior */ u8 ipath_led_override; /* Substituted for normal value, if non-zero */ u16 ipath_led_override_timeoff; /* delta to next timer event */ @@ -639,6 +700,10 @@ struct ipath_devdata { * each of the counters to increment. */ struct ipath_eep_log_mask ipath_eep_st_masks[IPATH_EEP_LOG_CNT]; + + /* interrupt mitigation reload register info */ + u16 ipath_jint_idle_ticks; /* idle clock ticks */ + u16 ipath_jint_max_packets; /* max packets across all ports */ }; /* Private data for file operations */ @@ -937,6 +1002,27 @@ static inline u64 ipath_read_ireg(const struct ipath_devdata *dd, ipath_kreg r) ipath_read_kreg64(dd, r) : ipath_read_kreg32(dd, r); } +/* + * from contents of IBCStatus (or a saved copy), return linkstate + * Report ACTIVE_DEFER as ACTIVE, because we treat them the same + * everywhere, anyway (and should be, for almost all purposes). + */ +static inline u32 ipath_ib_linkstate(struct ipath_devdata *dd, u64 ibcs) +{ + u32 state = (u32)(ibcs >> dd->ibcs_ls_shift) & + INFINIPATH_IBCS_LINKSTATE_MASK; + if (state == INFINIPATH_IBCS_L_STATE_ACT_DEFER) + state = INFINIPATH_IBCS_L_STATE_ACTIVE; + return state; +} + +/* from contents of IBCStatus (or a saved copy), return linktrainingstate */ +static inline u32 ipath_ib_linktrstate(struct ipath_devdata *dd, u64 ibcs) +{ + return (u32)(ibcs >> INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) & + dd->ibcs_lts_mask; +} + /* * sysfs interface. */ -- cgit v1.2.3-59-g8ed1b From 359193ef433061515fe24d57e5bd5a1318d71bc3 Mon Sep 17 00:00:00 2001 From: Michael Albaugh Date: Tue, 8 Jan 2008 00:37:34 -0800 Subject: IB/ipath: New sysfs entries to control 7220 features IBA7220 includes many more configurable IB settings. Getting/setting these is now grouped into a pair of chip specific functions accessed via function pointers. Provide sysfs access to these settings. Signed-off-by: Michael Albaugh Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_kernel.h | 3 + drivers/infiniband/hw/ipath/ipath_sysfs.c | 363 +++++++++++++++++++++++++++++ 2 files changed, 366 insertions(+) diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h index 6a5fe0157330..3da8dd79d26e 100644 --- a/drivers/infiniband/hw/ipath/ipath_kernel.h +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -824,6 +824,9 @@ int ipath_set_rx_pol_inv(struct ipath_devdata *dd, u8 new_pol_inv); /* Use GPIO interrupts for new counters */ #define IPATH_GPIO_ERRINTRS 0x100000 #define IPATH_SWAP_PIOBUFS 0x200000 + /* Suppress heartbeat, even if turning off loopback */ +#define IPATH_NO_HRTBT 0x1000000 +#define IPATH_HAS_MULT_IB_SPEED 0x8000000 /* Bits in GPIO for the added interrupts */ #define IPATH_GPIO_PORT0_BIT 2 diff --git a/drivers/infiniband/hw/ipath/ipath_sysfs.c b/drivers/infiniband/hw/ipath/ipath_sysfs.c index e2a65349c824..56dfc8a2344c 100644 --- a/drivers/infiniband/hw/ipath/ipath_sysfs.c +++ b/drivers/infiniband/hw/ipath/ipath_sysfs.c @@ -363,6 +363,60 @@ static ssize_t show_unit(struct device *dev, return scnprintf(buf, PAGE_SIZE, "%u\n", dd->ipath_unit); } +static ssize_t show_jint_max_packets(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct ipath_devdata *dd = dev_get_drvdata(dev); + + return scnprintf(buf, PAGE_SIZE, "%hu\n", dd->ipath_jint_max_packets); +} + +static ssize_t store_jint_max_packets(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct ipath_devdata *dd = dev_get_drvdata(dev); + u16 v = 0; + int ret; + + ret = ipath_parse_ushort(buf, &v); + if (ret < 0) + ipath_dev_err(dd, "invalid jint_max_packets.\n"); + else + dd->ipath_f_config_jint(dd, dd->ipath_jint_idle_ticks, v); + + return ret; +} + +static ssize_t show_jint_idle_ticks(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct ipath_devdata *dd = dev_get_drvdata(dev); + + return scnprintf(buf, PAGE_SIZE, "%hu\n", dd->ipath_jint_idle_ticks); +} + +static ssize_t store_jint_idle_ticks(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct ipath_devdata *dd = dev_get_drvdata(dev); + u16 v = 0; + int ret; + + ret = ipath_parse_ushort(buf, &v); + if (ret < 0) + ipath_dev_err(dd, "invalid jint_idle_ticks.\n"); + else + dd->ipath_f_config_jint(dd, v, dd->ipath_jint_max_packets); + + return ret; +} + #define DEVICE_COUNTER(name, attr) \ static ssize_t show_counter_##name(struct device *dev, \ struct device_attribute *attr, \ @@ -670,6 +724,257 @@ static ssize_t show_logged_errs(struct device *dev, return count; } +/* + * New sysfs entries to control various IB config. These all turn into + * accesses via ipath_f_get/set_ib_cfg. + * + * Get/Set heartbeat enable. Or of 1=enabled, 2=auto + */ +static ssize_t show_hrtbt_enb(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct ipath_devdata *dd = dev_get_drvdata(dev); + int ret; + + ret = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_HRTBT); + if (ret >= 0) + ret = scnprintf(buf, PAGE_SIZE, "%d\n", ret); + return ret; +} + +static ssize_t store_hrtbt_enb(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct ipath_devdata *dd = dev_get_drvdata(dev); + int ret, r; + u16 val; + + ret = ipath_parse_ushort(buf, &val); + if (ret >= 0 && val > 3) + ret = -EINVAL; + if (ret < 0) { + ipath_dev_err(dd, "attempt to set invalid Heartbeat enable\n"); + goto bail; + } + + /* + * Set the "intentional" heartbeat enable per either of + * "Enable" and "Auto", as these are normally set together. + * This bit is consulted when leaving loopback mode, + * because entering loopback mode overrides it and automatically + * disables heartbeat. + */ + r = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_HRTBT, val); + if (r < 0) + ret = r; + else if (val == IPATH_IB_HRTBT_OFF) + dd->ipath_flags |= IPATH_NO_HRTBT; + else + dd->ipath_flags &= ~IPATH_NO_HRTBT; + +bail: + return ret; +} + +/* + * Get/Set Link-widths enabled. Or of 1=1x, 2=4x (this is human/IB centric, + * _not_ the particular encoding of any given chip) + */ +static ssize_t show_lwid_enb(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct ipath_devdata *dd = dev_get_drvdata(dev); + int ret; + + ret = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_LWID_ENB); + if (ret >= 0) + ret = scnprintf(buf, PAGE_SIZE, "%d\n", ret); + return ret; +} + +static ssize_t store_lwid_enb(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct ipath_devdata *dd = dev_get_drvdata(dev); + int ret, r; + u16 val; + + ret = ipath_parse_ushort(buf, &val); + if (ret >= 0 && (val == 0 || val > 3)) + ret = -EINVAL; + if (ret < 0) { + ipath_dev_err(dd, + "attempt to set invalid Link Width (enable)\n"); + goto bail; + } + + r = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_LWID_ENB, val); + if (r < 0) + ret = r; + +bail: + return ret; +} + +/* Get current link width */ +static ssize_t show_lwid(struct device *dev, + struct device_attribute *attr, + char *buf) + +{ + struct ipath_devdata *dd = dev_get_drvdata(dev); + int ret; + + ret = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_LWID); + if (ret >= 0) + ret = scnprintf(buf, PAGE_SIZE, "%d\n", ret); + return ret; +} + +/* + * Get/Set Link-speeds enabled. Or of 1=SDR 2=DDR. + */ +static ssize_t show_spd_enb(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct ipath_devdata *dd = dev_get_drvdata(dev); + int ret; + + ret = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_SPD_ENB); + if (ret >= 0) + ret = scnprintf(buf, PAGE_SIZE, "%d\n", ret); + return ret; +} + +static ssize_t store_spd_enb(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct ipath_devdata *dd = dev_get_drvdata(dev); + int ret, r; + u16 val; + + ret = ipath_parse_ushort(buf, &val); + if (ret >= 0 && (val == 0 || val > (IPATH_IB_SDR | IPATH_IB_DDR))) + ret = -EINVAL; + if (ret < 0) { + ipath_dev_err(dd, + "attempt to set invalid Link Speed (enable)\n"); + goto bail; + } + + r = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_SPD_ENB, val); + if (r < 0) + ret = r; + +bail: + return ret; +} + +/* Get current link speed */ +static ssize_t show_spd(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct ipath_devdata *dd = dev_get_drvdata(dev); + int ret; + + ret = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_SPD); + if (ret >= 0) + ret = scnprintf(buf, PAGE_SIZE, "%d\n", ret); + return ret; +} + +/* + * Get/Set RX polarity-invert enable. 0=no, 1=yes. + */ +static ssize_t show_rx_polinv_enb(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct ipath_devdata *dd = dev_get_drvdata(dev); + int ret; + + ret = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_RXPOL_ENB); + if (ret >= 0) + ret = scnprintf(buf, PAGE_SIZE, "%d\n", ret); + return ret; +} + +static ssize_t store_rx_polinv_enb(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct ipath_devdata *dd = dev_get_drvdata(dev); + int ret, r; + u16 val; + + ret = ipath_parse_ushort(buf, &val); + if (ret < 0 || val > 1) + goto invalid; + + r = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_RXPOL_ENB, val); + if (r < 0) { + ret = r; + goto bail; + } + + goto bail; +invalid: + ipath_dev_err(dd, "attempt to set invalid Rx Polarity (enable)\n"); +bail: + return ret; +} +/* + * Get/Set RX lane-reversal enable. 0=no, 1=yes. + */ +static ssize_t show_lanerev_enb(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct ipath_devdata *dd = dev_get_drvdata(dev); + int ret; + + ret = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_LREV_ENB); + if (ret >= 0) + ret = scnprintf(buf, PAGE_SIZE, "%d\n", ret); + return ret; +} + +static ssize_t store_lanerev_enb(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t count) +{ + struct ipath_devdata *dd = dev_get_drvdata(dev); + int ret, r; + u16 val; + + ret = ipath_parse_ushort(buf, &val); + if (ret >= 0 && val > 1) { + ret = -EINVAL; + ipath_dev_err(dd, + "attempt to set invalid Lane reversal (enable)\n"); + goto bail; + } + + r = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_LREV_ENB, val); + if (r < 0) + ret = r; + +bail: + return ret; +} + static DRIVER_ATTR(num_units, S_IRUGO, show_num_units, NULL); static DRIVER_ATTR(version, S_IRUGO, show_version, NULL); @@ -706,6 +1011,10 @@ static DEVICE_ATTR(unit, S_IRUGO, show_unit, NULL); static DEVICE_ATTR(rx_pol_inv, S_IWUSR, NULL, store_rx_pol_inv); static DEVICE_ATTR(led_override, S_IWUSR, NULL, store_led_override); static DEVICE_ATTR(logged_errors, S_IRUGO, show_logged_errs, NULL); +static DEVICE_ATTR(jint_max_packets, S_IWUSR | S_IRUGO, + show_jint_max_packets, store_jint_max_packets); +static DEVICE_ATTR(jint_idle_ticks, S_IWUSR | S_IRUGO, + show_jint_idle_ticks, store_jint_idle_ticks); static struct attribute *dev_attributes[] = { &dev_attr_guid.attr, @@ -732,6 +1041,34 @@ static struct attribute_group dev_attr_group = { .attrs = dev_attributes }; +static DEVICE_ATTR(hrtbt_enable, S_IWUSR | S_IRUGO, show_hrtbt_enb, + store_hrtbt_enb); +static DEVICE_ATTR(link_width_enable, S_IWUSR | S_IRUGO, show_lwid_enb, + store_lwid_enb); +static DEVICE_ATTR(link_width, S_IRUGO, show_lwid, NULL); +static DEVICE_ATTR(link_speed_enable, S_IWUSR | S_IRUGO, show_spd_enb, + store_spd_enb); +static DEVICE_ATTR(link_speed, S_IRUGO, show_spd, NULL); +static DEVICE_ATTR(rx_pol_inv_enable, S_IWUSR | S_IRUGO, show_rx_polinv_enb, + store_rx_polinv_enb); +static DEVICE_ATTR(rx_lane_rev_enable, S_IWUSR | S_IRUGO, show_lanerev_enb, + store_lanerev_enb); + +static struct attribute *dev_ibcfg_attributes[] = { + &dev_attr_hrtbt_enable.attr, + &dev_attr_link_width_enable.attr, + &dev_attr_link_width.attr, + &dev_attr_link_speed_enable.attr, + &dev_attr_link_speed.attr, + &dev_attr_rx_pol_inv_enable.attr, + &dev_attr_rx_lane_rev_enable.attr, + NULL +}; + +static struct attribute_group dev_ibcfg_attr_group = { + .attrs = dev_ibcfg_attributes +}; + /** * ipath_expose_reset - create a device reset file * @dev: the device structure @@ -770,8 +1107,27 @@ int ipath_device_create_group(struct device *dev, struct ipath_devdata *dd) if (ret) goto bail_attrs; + if (dd->ipath_flags & IPATH_HAS_MULT_IB_SPEED) { + ret = device_create_file(dev, &dev_attr_jint_idle_ticks); + if (ret) + goto bail_counter; + ret = device_create_file(dev, &dev_attr_jint_max_packets); + if (ret) + goto bail_idle; + + ret = sysfs_create_group(&dev->kobj, &dev_ibcfg_attr_group); + if (ret) + goto bail_max; + } + return 0; +bail_max: + device_remove_file(dev, &dev_attr_jint_max_packets); +bail_idle: + device_remove_file(dev, &dev_attr_jint_idle_ticks); +bail_counter: + sysfs_remove_group(&dev->kobj, &dev_counter_attr_group); bail_attrs: sysfs_remove_group(&dev->kobj, &dev_attr_group); bail: @@ -781,6 +1137,13 @@ bail: void ipath_device_remove_group(struct device *dev, struct ipath_devdata *dd) { sysfs_remove_group(&dev->kobj, &dev_counter_attr_group); + + if (dd->ipath_flags & IPATH_HAS_MULT_IB_SPEED) { + sysfs_remove_group(&dev->kobj, &dev_ibcfg_attr_group); + device_remove_file(dev, &dev_attr_jint_idle_ticks); + device_remove_file(dev, &dev_attr_jint_max_packets); + } + sysfs_remove_group(&dev->kobj, &dev_attr_group); device_remove_file(dev, &dev_attr_reset); -- cgit v1.2.3-59-g8ed1b From ddb70c83a5ce439271f1699e52a97785a8b45b81 Mon Sep 17 00:00:00 2001 From: Dave Olson Date: Tue, 8 Jan 2008 01:51:46 -0800 Subject: IB/ipath: Minor cleanup of unused fields and chip-specific errors Clean up some unused header fields, minor related cleanup. Signed-off-by: Dave Olson Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_iba6120.c | 79 +++++++++-------------------- drivers/infiniband/hw/ipath/ipath_kernel.h | 5 +- 2 files changed, 25 insertions(+), 59 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c index 597192e912de..c7a2f50824c0 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6120.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c @@ -373,10 +373,28 @@ static const struct ipath_hwerror_msgs ipath_6120_hwerror_msgs[] = { INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC) \ << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT) -static int ipath_pe_txe_recover(struct ipath_devdata *); static void ipath_pe_put_tid_2(struct ipath_devdata *, u64 __iomem *, u32, unsigned long); +/* + * On platforms using this chip, and not having ordered WC stores, we + * can get TXE parity errors due to speculative reads to the PIO buffers, + * and this, due to a chip bug can result in (many) false parity error + * reports. So it's a debug print on those, and an info print on systems + * where the speculative reads don't occur. + */ +static void ipath_pe_txe_recover(struct ipath_devdata *dd) +{ + if (ipath_unordered_wc()) + ipath_dbg("Recovering from TXE PIO parity error\n"); + else { + ++ipath_stats.sps_txeparity; + dev_info(&dd->pcidev->dev, + "Recovering from TXE PIO parity error\n"); + } +} + + /** * ipath_pe_handle_hwerrors - display hardware errors. * @dd: the infinipath device @@ -456,35 +474,11 @@ static void ipath_pe_handle_hwerrors(struct ipath_devdata *dd, char *msg, * occur if a processor speculative read is done to the PIO * buffer while we are sending a packet, for example. */ - if ((hwerrs & TXE_PIO_PARITY) && ipath_pe_txe_recover(dd)) + if (hwerrs & TXE_PIO_PARITY) { + ipath_pe_txe_recover(dd); hwerrs &= ~TXE_PIO_PARITY; - if (hwerrs) { - /* - * if any set that we aren't ignoring only make the - * complaint once, in case it's stuck or recurring, - * and we get here multiple times - * Force link down, so switch knows, and - * LEDs are turned off - */ - if (dd->ipath_flags & IPATH_INITTED) { - ipath_set_linkstate(dd, IPATH_IB_LINKDOWN); - ipath_setup_pe_setextled(dd, - INFINIPATH_IBCS_L_STATE_DOWN, - INFINIPATH_IBCS_LT_STATE_DISABLED); - ipath_dev_err(dd, "Fatal Hardware Error (freeze " - "mode), no longer usable, SN %.16s\n", - dd->ipath_serial); - isfatal = 1; - } - /* - * Mark as having had an error for driver, and also - * for /sys and status word mapped to user programs. - * This marks unit as not usable, until reset - */ - *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY; - *dd->ipath_statusp |= IPATH_STATUS_HWERROR; - dd->ipath_flags &= ~IPATH_INITTED; - } else { + } + if (!hwerrs) { static u32 freeze_cnt; freeze_cnt++; @@ -1569,33 +1563,6 @@ static void ipath_pe_read_counters(struct ipath_devdata *dd, cntrs->RxDlidFltrCnt = 0; } -/* - * On platforms using this chip, and not having ordered WC stores, we - * can get TXE parity errors due to speculative reads to the PIO buffers, - * and this, due to a chip bug can result in (many) false parity error - * reports. So it's a debug print on those, and an info print on systems - * where the speculative reads don't occur. - * Because we can get lots of false errors, we have no upper limit - * on recovery attempts on those platforms. - */ -static int ipath_pe_txe_recover(struct ipath_devdata *dd) -{ - if (ipath_unordered_wc()) - ipath_dbg("Recovering from TXE PIO parity error\n"); - else { - int cnt = ++ipath_stats.sps_txeparity; - if (cnt >= IPATH_MAX_PARITY_ATTEMPTS) { - if (cnt == IPATH_MAX_PARITY_ATTEMPTS) - ipath_dev_err(dd, - "Too many attempts to recover from " - "TXE parity, giving up\n"); - return 0; - } - dev_info(&dd->pcidev->dev, - "Recovering from TXE PIO parity error\n"); - } - return 1; -} /* no interrupt fallback for these chips */ static int ipath_pe_nointr_fallback(struct ipath_devdata *dd) diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h index 3da8dd79d26e..31d79e246aa0 100644 --- a/drivers/infiniband/hw/ipath/ipath_kernel.h +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -396,14 +396,13 @@ struct ipath_devdata { unsigned long ipath_wc_len; /* ref count for each pkey */ atomic_t ipath_pkeyrefs[4]; - /* shadow copy of all exptids physaddr; used only by funcsim */ - u64 *ipath_tidsimshadow; /* shadow copy of struct page *'s for exp tid pages */ struct page **ipath_pageshadow; /* shadow copy of dma handles for exp tid pages */ dma_addr_t *ipath_physshadow; u64 __iomem *ipath_egrtidbase; - /* lock to workaround chip bug 9437 */ + /* lock to workaround chip bug 9437 and others */ + spinlock_t ipath_kernel_tid_lock; spinlock_t ipath_tid_lock; spinlock_t ipath_sendctrl_lock; -- cgit v1.2.3-59-g8ed1b From 6ac50727bda29e961385e4c40318dadbb5730193 Mon Sep 17 00:00:00 2001 From: Dave Olson Date: Thu, 9 Aug 2007 03:11:38 -0700 Subject: IB/ipath: Changes to support PIO bandwidth check on IBA7220 The IBA7220 uses a count-based triggering mechanism, and therefore can't use the same bandwidth verification mechanism as older chips. To support the 7220, allow enabling and disabling armlaunch errors on application request. Minor robustness improvements as well. Signed-off-by: Dave Olson Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_common.h | 5 ++++- drivers/infiniband/hw/ipath/ipath_driver.c | 32 ++++++++++++++++++++++++++++ drivers/infiniband/hw/ipath/ipath_file_ops.c | 11 ++++++++++ drivers/infiniband/hw/ipath/ipath_kernel.h | 2 ++ 4 files changed, 49 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/ipath/ipath_common.h b/drivers/infiniband/hw/ipath/ipath_common.h index 0fa43ba25b7e..414621095540 100644 --- a/drivers/infiniband/hw/ipath/ipath_common.h +++ b/drivers/infiniband/hw/ipath/ipath_common.h @@ -443,8 +443,9 @@ struct ipath_user_info { #define IPATH_CMD_UNUSED_2 26 #define IPATH_CMD_PIOAVAILUPD 27 /* force an update of PIOAvail reg */ #define IPATH_CMD_POLL_TYPE 28 /* set the kind of polling we want */ +#define IPATH_CMD_ARMLAUNCH_CTRL 29 /* armlaunch detection control */ -#define IPATH_CMD_MAX 28 +#define IPATH_CMD_MAX 29 /* * Poll types @@ -487,6 +488,8 @@ struct ipath_cmd { __u64 port_info; /* enable/disable receipt of packets */ __u32 recv_ctrl; + /* enable/disable armlaunch errors (non-zero to enable) */ + __u32 armlaunch_ctrl; /* partition key to set */ __u16 part_key; /* user address of __u32 bitmask of active slaves */ diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c index bfcdf8c254c5..d5ff6ca2db30 100644 --- a/drivers/infiniband/hw/ipath/ipath_driver.c +++ b/drivers/infiniband/hw/ipath/ipath_driver.c @@ -334,6 +334,8 @@ static void ipath_verify_pioperf(struct ipath_devdata *dd) udelay(1); } + ipath_disable_armlaunch(dd); + writeq(0, piobuf); /* length 0, no dwords actually sent */ ipath_flush_wc(); @@ -365,6 +367,7 @@ static void ipath_verify_pioperf(struct ipath_devdata *dd) done: /* disarm piobuf, so it's available again */ ipath_disarm_piobufs(dd, pbnum, 1); + ipath_enable_armlaunch(dd); } static int __devinit ipath_init_one(struct pci_dev *pdev, @@ -2271,5 +2274,34 @@ int ipath_set_rx_pol_inv(struct ipath_devdata *dd, u8 new_pol_inv) } return 0; } + +/* + * Disable and enable the armlaunch error. Used for PIO bandwidth testing on + * the 7220, which is count-based, rather than trigger-based. Safe for the + * driver check, since it's at init. Not completely safe when used for + * user-mode checking, since some error checking can be lost, but not + * particularly risky, and only has problematic side-effects in the face of + * very buggy user code. There is no reference counting, but that's also + * fine, given the intended use. + */ +void ipath_enable_armlaunch(struct ipath_devdata *dd) +{ + dd->ipath_lasterror &= ~INFINIPATH_E_SPIOARMLAUNCH; + ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, + INFINIPATH_E_SPIOARMLAUNCH); + dd->ipath_errormask |= INFINIPATH_E_SPIOARMLAUNCH; + ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask, + dd->ipath_errormask); +} + +void ipath_disable_armlaunch(struct ipath_devdata *dd) +{ + /* so don't re-enable if already set */ + dd->ipath_maskederrs &= ~INFINIPATH_E_SPIOARMLAUNCH; + dd->ipath_errormask &= ~INFINIPATH_E_SPIOARMLAUNCH; + ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask, + dd->ipath_errormask); +} + module_init(infinipath_init); module_exit(infinipath_cleanup); diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c index 7b2f59af9c91..7e025c8e01b6 100644 --- a/drivers/infiniband/hw/ipath/ipath_file_ops.c +++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c @@ -2224,6 +2224,11 @@ static ssize_t ipath_write(struct file *fp, const char __user *data, dest = &cmd.cmd.poll_type; src = &ucmd->cmd.poll_type; break; + case IPATH_CMD_ARMLAUNCH_CTRL: + copy = sizeof(cmd.cmd.armlaunch_ctrl); + dest = &cmd.cmd.armlaunch_ctrl; + src = &ucmd->cmd.armlaunch_ctrl; + break; default: ret = -EINVAL; goto bail; @@ -2299,6 +2304,12 @@ static ssize_t ipath_write(struct file *fp, const char __user *data, case IPATH_CMD_POLL_TYPE: pd->poll_type = cmd.cmd.poll_type; break; + case IPATH_CMD_ARMLAUNCH_CTRL: + if (cmd.cmd.armlaunch_ctrl) + ipath_enable_armlaunch(pd->port_dd); + else + ipath_disable_armlaunch(pd->port_dd); + break; } if (ret >= 0) diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h index 31d79e246aa0..4cc0f95ea877 100644 --- a/drivers/infiniband/hw/ipath/ipath_kernel.h +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -771,6 +771,8 @@ int ipath_set_linkstate(struct ipath_devdata *, u8); int ipath_set_mtu(struct ipath_devdata *, u16); int ipath_set_lid(struct ipath_devdata *, u32, u8); int ipath_set_rx_pol_inv(struct ipath_devdata *dd, u8 new_pol_inv); +void ipath_enable_armlaunch(struct ipath_devdata *); +void ipath_disable_armlaunch(struct ipath_devdata *); /* for use in system calls, where we want to know device type, etc. */ #define port_fp(fp) ((struct ipath_filedata *)(fp)->private_data)->pd -- cgit v1.2.3-59-g8ed1b From 3d68ea32611095c7e09409ac1b2a56da22fd5eb7 Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Thu, 10 Jan 2008 00:50:41 -0800 Subject: IB/ipath: Add mappings from HW register to PortInfo port physical state Add new mappings from port physical state (a HW register value) to the IB SubnGet(PortInfo) port physical state. Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_verbs.c | 47 ++++++++++++++++++++----------- drivers/infiniband/hw/ipath/ipath_verbs.h | 10 +++++++ 2 files changed, 41 insertions(+), 16 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c index 904ff1571ba6..32d8f882e56c 100644 --- a/drivers/infiniband/hw/ipath/ipath_verbs.c +++ b/drivers/infiniband/hw/ipath/ipath_verbs.c @@ -1133,20 +1133,34 @@ static int ipath_query_device(struct ib_device *ibdev, return 0; } -const u8 ipath_cvt_physportstate[16] = { - [INFINIPATH_IBCS_LT_STATE_DISABLED] = 3, - [INFINIPATH_IBCS_LT_STATE_LINKUP] = 5, - [INFINIPATH_IBCS_LT_STATE_POLLACTIVE] = 2, - [INFINIPATH_IBCS_LT_STATE_POLLQUIET] = 2, - [INFINIPATH_IBCS_LT_STATE_SLEEPDELAY] = 1, - [INFINIPATH_IBCS_LT_STATE_SLEEPQUIET] = 1, - [INFINIPATH_IBCS_LT_STATE_CFGDEBOUNCE] = 4, - [INFINIPATH_IBCS_LT_STATE_CFGRCVFCFG] = 4, - [INFINIPATH_IBCS_LT_STATE_CFGWAITRMT] = 4, - [INFINIPATH_IBCS_LT_STATE_CFGIDLE] = 4, - [INFINIPATH_IBCS_LT_STATE_RECOVERRETRAIN] = 6, - [INFINIPATH_IBCS_LT_STATE_RECOVERWAITRMT] = 6, - [INFINIPATH_IBCS_LT_STATE_RECOVERIDLE] = 6, +const u8 ipath_cvt_physportstate[32] = { + [INFINIPATH_IBCS_LT_STATE_DISABLED] = IB_PHYSPORTSTATE_DISABLED, + [INFINIPATH_IBCS_LT_STATE_LINKUP] = IB_PHYSPORTSTATE_LINKUP, + [INFINIPATH_IBCS_LT_STATE_POLLACTIVE] = IB_PHYSPORTSTATE_POLL, + [INFINIPATH_IBCS_LT_STATE_POLLQUIET] = IB_PHYSPORTSTATE_POLL, + [INFINIPATH_IBCS_LT_STATE_SLEEPDELAY] = IB_PHYSPORTSTATE_SLEEP, + [INFINIPATH_IBCS_LT_STATE_SLEEPQUIET] = IB_PHYSPORTSTATE_SLEEP, + [INFINIPATH_IBCS_LT_STATE_CFGDEBOUNCE] = + IB_PHYSPORTSTATE_CFG_TRAIN, + [INFINIPATH_IBCS_LT_STATE_CFGRCVFCFG] = + IB_PHYSPORTSTATE_CFG_TRAIN, + [INFINIPATH_IBCS_LT_STATE_CFGWAITRMT] = + IB_PHYSPORTSTATE_CFG_TRAIN, + [INFINIPATH_IBCS_LT_STATE_CFGIDLE] = IB_PHYSPORTSTATE_CFG_TRAIN, + [INFINIPATH_IBCS_LT_STATE_RECOVERRETRAIN] = + IB_PHYSPORTSTATE_LINK_ERR_RECOVER, + [INFINIPATH_IBCS_LT_STATE_RECOVERWAITRMT] = + IB_PHYSPORTSTATE_LINK_ERR_RECOVER, + [INFINIPATH_IBCS_LT_STATE_RECOVERIDLE] = + IB_PHYSPORTSTATE_LINK_ERR_RECOVER, + [0x10] = IB_PHYSPORTSTATE_CFG_TRAIN, + [0x11] = IB_PHYSPORTSTATE_CFG_TRAIN, + [0x12] = IB_PHYSPORTSTATE_CFG_TRAIN, + [0x13] = IB_PHYSPORTSTATE_CFG_TRAIN, + [0x14] = IB_PHYSPORTSTATE_CFG_TRAIN, + [0x15] = IB_PHYSPORTSTATE_CFG_TRAIN, + [0x16] = IB_PHYSPORTSTATE_CFG_TRAIN, + [0x17] = IB_PHYSPORTSTATE_CFG_TRAIN }; u32 ipath_get_cr_errpkey(struct ipath_devdata *dd) @@ -1171,8 +1185,9 @@ static int ipath_query_port(struct ib_device *ibdev, ibcstat = dd->ipath_lastibcstat; props->state = ((ibcstat >> 4) & 0x3) + 1; /* See phys_state_show() */ - props->phys_state = ipath_cvt_physportstate[ - dd->ipath_lastibcstat & 0xf]; + props->phys_state = /* MEA: assumes shift == 0 */ + ipath_cvt_physportstate[dd->ipath_lastibcstat & + dd->ibcs_lts_mask]; props->port_cap_flags = dev->port_cap_flags; props->gid_tbl_len = 1; props->max_msg_sz = 0x80000000; diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.h b/drivers/infiniband/hw/ipath/ipath_verbs.h index 1c8985012743..3d59736b49b2 100644 --- a/drivers/infiniband/hw/ipath/ipath_verbs.h +++ b/drivers/infiniband/hw/ipath/ipath_verbs.h @@ -832,7 +832,17 @@ unsigned ipath_get_pkey(struct ipath_devdata *, unsigned); extern const enum ib_wc_opcode ib_ipath_wc_opcode[]; +/* + * Below converts HCA-specific LinkTrainingState to IB PhysPortState + * values. + */ extern const u8 ipath_cvt_physportstate[]; +#define IB_PHYSPORTSTATE_SLEEP 1 +#define IB_PHYSPORTSTATE_POLL 2 +#define IB_PHYSPORTSTATE_DISABLED 3 +#define IB_PHYSPORTSTATE_CFG_TRAIN 4 +#define IB_PHYSPORTSTATE_LINKUP 5 +#define IB_PHYSPORTSTATE_LINK_ERR_RECOVER 6 extern const int ib_ipath_state_ops[]; -- cgit v1.2.3-59-g8ed1b From 48fe5e594c979177b7f20affd027be56e8ea2767 Mon Sep 17 00:00:00 2001 From: Krishna Kumar Date: Thu, 15 Nov 2007 10:35:37 +0530 Subject: IPoIB: Remove redundant check of netif_queue_stopped() in xmit handler qdisc_run() now tests for queue_stopped() before calling __qdisc_run(), and the same check is done in every iteration of __qdisc_run(), so another check is not required in the driver xmit. This means that ipoib_start_xmit() no longer needs to test netif_queue_stopped(); the test was added to fix earlier kernels, where the networking stack did not guarantee that the xmit method of an LLTX driver would not be called after the queue was stopped, but current kernels do provide this guarantee. To validate, I put a debug in the TX_BUSY path which never hit with 64 threads running overnight exercising this code a few 100 million times. Signed-off-by: Krishna Kumar Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index d7330451685c..a082466f4a83 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -672,16 +672,6 @@ static int ipoib_start_xmit(struct sk_buff *skb, struct net_device *dev) if (unlikely(!spin_trylock_irqsave(&priv->tx_lock, flags))) return NETDEV_TX_LOCKED; - /* - * Check if our queue is stopped. Since we have the LLTX bit - * set, we can't rely on netif_stop_queue() preventing our - * xmit function from being called with a full queue. - */ - if (unlikely(netif_queue_stopped(dev))) { - spin_unlock_irqrestore(&priv->tx_lock, flags); - return NETDEV_TX_BUSY; - } - if (likely(skb->dst && skb->dst->neighbour)) { if (unlikely(!*to_ipoib_neigh(skb->dst->neighbour))) { ipoib_path_lookup(skb, dev); -- cgit v1.2.3-59-g8ed1b From 950529e5c6efda8a6d3090a8fef9b904c833397a Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 25 Jan 2008 14:17:44 -0800 Subject: IB/mthca: Update latest "native Arbel" firmware revision Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index 2fc36ca134a6..5cf8250d4e16 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -998,7 +998,7 @@ static struct { .flags = 0 }, [ARBEL_COMPAT] = { .latest_fw = MTHCA_FW_VER(4, 8, 200), .flags = MTHCA_FLAG_PCIE }, - [ARBEL_NATIVE] = { .latest_fw = MTHCA_FW_VER(5, 2, 0), + [ARBEL_NATIVE] = { .latest_fw = MTHCA_FW_VER(5, 3, 0), .flags = MTHCA_FLAG_MEMFREE | MTHCA_FLAG_PCIE }, [SINAI] = { .latest_fw = MTHCA_FW_VER(1, 2, 0), -- cgit v1.2.3-59-g8ed1b From 4e1e93a4189a98cfb0e24865f7f44470ae5f805e Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Fri, 25 Jan 2008 14:17:44 -0800 Subject: IB/ipath: Trivial simplification of ipath_make_ud_req() Move the increment of s_hdrwords into the existing if block that tests if we're doing a send with immediate, to save one test of the opcode. Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_ud.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_ud.c b/drivers/infiniband/hw/ipath/ipath_ud.c index b3df6f3c705e..de67eed08ed0 100644 --- a/drivers/infiniband/hw/ipath/ipath_ud.c +++ b/drivers/infiniband/hw/ipath/ipath_ud.c @@ -301,8 +301,6 @@ int ipath_make_ud_req(struct ipath_qp *qp) /* header size in 32-bit words LRH+BTH+DETH = (8+12+8)/4. */ qp->s_hdrwords = 7; - if (wqe->wr.opcode == IB_WR_SEND_WITH_IMM) - qp->s_hdrwords++; qp->s_cur_size = wqe->length; qp->s_cur_sge = &qp->s_sge; qp->s_wqe = wqe; @@ -327,6 +325,7 @@ int ipath_make_ud_req(struct ipath_qp *qp) ohdr = &qp->s_hdr.u.oth; } if (wqe->wr.opcode == IB_WR_SEND_WITH_IMM) { + qp->s_hdrwords++; ohdr->u.ud.imm_data = wqe->wr.imm_data; bth0 = IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE << 24; } else -- cgit v1.2.3-59-g8ed1b From 856b5925047d73a85557203d124d62c5eea1fbd3 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Mon, 21 Jan 2008 14:42:09 -0600 Subject: RDMA/cxgb3: Flush the receive queue when closing - for kernel mode cqs, call event notification handler when flushing. - flush QP when moving from RTS -> CLOSING. - fix logic to identify a kernel mode qp. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb3/iwch_qp.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c index 9bb811256b28..7681fdc0e21d 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_qp.c +++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c @@ -642,6 +642,7 @@ static void __flush_qp(struct iwch_qp *qhp, unsigned long *flag) cxio_flush_rq(&qhp->wq, &rchp->cq, count); spin_unlock(&qhp->lock); spin_unlock_irqrestore(&rchp->lock, *flag); + (*rchp->ibcq.comp_handler)(&rchp->ibcq, rchp->ibcq.cq_context); /* locking heirarchy: cq lock first, then qp lock. */ spin_lock_irqsave(&schp->lock, *flag); @@ -651,6 +652,7 @@ static void __flush_qp(struct iwch_qp *qhp, unsigned long *flag) cxio_flush_sq(&qhp->wq, &schp->cq, count); spin_unlock(&qhp->lock); spin_unlock_irqrestore(&schp->lock, *flag); + (*schp->ibcq.comp_handler)(&schp->ibcq, schp->ibcq.cq_context); /* deref */ if (atomic_dec_and_test(&qhp->refcnt)) @@ -661,7 +663,7 @@ static void __flush_qp(struct iwch_qp *qhp, unsigned long *flag) static void flush_qp(struct iwch_qp *qhp, unsigned long *flag) { - if (t3b_device(qhp->rhp)) + if (qhp->ibqp.uobject) cxio_set_wq_in_error(&qhp->wq); else __flush_qp(qhp, flag); @@ -830,10 +832,11 @@ int iwch_modify_qp(struct iwch_dev *rhp, struct iwch_qp *qhp, disconnect = 1; ep = qhp->ep; } + flush_qp(qhp, &flag); break; case IWCH_QP_STATE_TERMINATE: qhp->attr.state = IWCH_QP_STATE_TERMINATE; - if (t3b_device(qhp->rhp)) + if (qhp->ibqp.uobject) cxio_set_wq_in_error(&qhp->wq); if (!internal) terminate = 1; -- cgit v1.2.3-59-g8ed1b From d08ca26ceec4dfbcfdbada4ad728db742ccaecd1 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Mon, 21 Jan 2008 14:42:11 -0600 Subject: RDMA/cxgb3: Fix page shift calculation in build_phys_page_list() The existing logic incorrectly maps this buffer list: 0: addr 0x10001000, size 0x1000 1: addr 0x10002000, size 0x1000 To this bogus page list: 0: 0x10000000 1: 0x10002000 The shift calculation must also take into account the address of the first entry masked by the page_mask as well as the last address+size rounded up to the next page size. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb3/iwch_mem.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/infiniband/hw/cxgb3/iwch_mem.c b/drivers/infiniband/hw/cxgb3/iwch_mem.c index a6c2c4ba29e6..73bfd1656f86 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_mem.c +++ b/drivers/infiniband/hw/cxgb3/iwch_mem.c @@ -122,6 +122,13 @@ int build_phys_page_list(struct ib_phys_buf *buffer_list, *total_size += buffer_list[i].size; if (i > 0) mask |= buffer_list[i].addr; + else + mask |= buffer_list[i].addr & PAGE_MASK; + if (i != num_phys_buf - 1) + mask |= buffer_list[i].addr + buffer_list[i].size; + else + mask |= (buffer_list[i].addr + buffer_list[i].size + + PAGE_SIZE - 1) & PAGE_MASK; } if (*total_size > 0xFFFFFFFFULL) -- cgit v1.2.3-59-g8ed1b From c6b5b5047417c1becb5e48e748e3acb3801079a1 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Mon, 21 Jan 2008 14:42:13 -0600 Subject: RDMA/cxgb3: Mark QP as privileged based on user capabilities This is needed to support zero-stag properly. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb3/cxio_wr.h | 3 ++- drivers/infiniband/hw/cxgb3/iwch_qp.c | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/cxgb3/cxio_wr.h b/drivers/infiniband/hw/cxgb3/cxio_wr.h index de366b0627b8..969d4d928455 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_wr.h +++ b/drivers/infiniband/hw/cxgb3/cxio_wr.h @@ -324,7 +324,8 @@ struct t3_genbit { }; enum rdma_init_wr_flags { - RECVS_POSTED = 1, + RECVS_POSTED = (1<<0), + PRIV_QP = (1<<1), }; union t3_wr { diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c index 7681fdc0e21d..ea2cdd73dd85 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_qp.c +++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c @@ -717,6 +717,7 @@ static int rdma_init(struct iwch_dev *rhp, struct iwch_qp *qhp, init_attr.qp_dma_addr = qhp->wq.dma_addr; init_attr.qp_dma_size = (1UL << qhp->wq.size_log2); init_attr.flags = rqes_posted(qhp) ? RECVS_POSTED : 0; + init_attr.flags |= capable(CAP_NET_BIND_SERVICE) ? PRIV_QP : 0; init_attr.irs = qhp->ep->rcv_seq; PDBG("%s init_attr.rq_addr 0x%x init_attr.rq_size = %d " "flags 0x%x qpcaps 0x%x\n", __FUNCTION__, -- cgit v1.2.3-59-g8ed1b From 1cf18d5aab5144866cb5221250905623b03a32a9 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Tue, 22 Jan 2008 20:45:30 +0100 Subject: IPoIB: Constify seq_operations function pointer tables Signed-off-by: Jan Engelhardt Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_fs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_fs.c b/drivers/infiniband/ulp/ipoib/ipoib_fs.c index 44c174182a82..8b882bbd1d05 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_fs.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_fs.c @@ -124,7 +124,7 @@ static int ipoib_mcg_seq_show(struct seq_file *file, void *iter_ptr) return 0; } -static struct seq_operations ipoib_mcg_seq_ops = { +static const struct seq_operations ipoib_mcg_seq_ops = { .start = ipoib_mcg_seq_start, .next = ipoib_mcg_seq_next, .stop = ipoib_mcg_seq_stop, @@ -230,7 +230,7 @@ static int ipoib_path_seq_show(struct seq_file *file, void *iter_ptr) return 0; } -static struct seq_operations ipoib_path_seq_ops = { +static const struct seq_operations ipoib_path_seq_ops = { .start = ipoib_path_seq_start, .next = ipoib_path_seq_next, .stop = ipoib_path_seq_stop, -- cgit v1.2.3-59-g8ed1b From f7fca1e8a8eeb6660396327b48995e3d9a7b6dc2 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Tue, 22 Jan 2008 20:45:30 +0100 Subject: IB/ipath: Remove unnecessary cast Signed-off-by: Jan Engelhardt Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_fs.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_fs.c b/drivers/infiniband/hw/ipath/ipath_fs.c index 52325e009a1f..23faba9d21eb 100644 --- a/drivers/infiniband/hw/ipath/ipath_fs.c +++ b/drivers/infiniband/hw/ipath/ipath_fs.c @@ -238,8 +238,7 @@ static int create_device_files(struct super_block *sb, snprintf(unit, sizeof unit, "%02d", dd->ipath_unit); ret = create_file(unit, S_IFDIR|S_IRUGO|S_IXUGO, sb->s_root, &dir, - (struct file_operations *) &simple_dir_operations, - dd); + &simple_dir_operations, dd); if (ret) { printk(KERN_ERR "create_file(%s) failed: %d\n", unit, ret); goto bail; -- cgit v1.2.3-59-g8ed1b From 8176d297c73a06e6076c9c31f6404047567f6324 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Thu, 24 Jan 2008 16:30:16 -0600 Subject: RDMA/cxgb3: Fix the T3A workaround checks Correctly work around T3A issues by checking "hwtype != T3A" instead of "hwtype == T3B". This will be needed for new hardware types. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb3/cxio_hal.c | 2 +- drivers/infiniband/hw/cxgb3/iwch_cm.c | 4 ++-- drivers/infiniband/hw/cxgb3/iwch_provider.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c index 26b8c0e1cfd7..03c5ff62889a 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_hal.c +++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c @@ -179,7 +179,7 @@ int cxio_create_cq(struct cxio_rdev *rdev_p, struct t3_cq *cq) setup.size = 1UL << cq->size_log2; setup.credits = 65535; setup.credit_thres = 1; - if (rdev_p->t3cdev_p->type == T3B) + if (rdev_p->t3cdev_p->type != T3A) setup.ovfl_mode = 0; else setup.ovfl_mode = 1; diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c index 20ba372dd182..f8cb0fe748c3 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_cm.c +++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c @@ -1118,7 +1118,7 @@ static int act_open_rpl(struct t3cdev *tdev, struct sk_buff *skb, void *ctx) status2errno(rpl->status)); connect_reply_upcall(ep, status2errno(rpl->status)); state_set(&ep->com, DEAD); - if (ep->com.tdev->type == T3B && act_open_has_tid(rpl->status)) + if (ep->com.tdev->type != T3A && act_open_has_tid(rpl->status)) release_tid(ep->com.tdev, GET_TID(rpl), NULL); cxgb3_free_atid(ep->com.tdev, ep->atid); dst_release(ep->dst); @@ -1249,7 +1249,7 @@ static void reject_cr(struct t3cdev *tdev, u32 hwtid, __be32 peer_ip, skb_trim(skb, sizeof(struct cpl_tid_release)); skb_get(skb); - if (tdev->type == T3B) + if (tdev->type != T3A) release_tid(tdev, hwtid, skb); else { struct cpl_pass_accept_rpl *rpl; diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c index 69b1204e05f0..df1838f8f94d 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_provider.c +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c @@ -646,7 +646,7 @@ static struct ib_mr *iwch_reg_user_mr(struct ib_pd *pd, u64 start, u64 length, if (err) goto err; - if (udata && t3b_device(rhp)) { + if (udata && !t3a_device(rhp)) { uresp.pbl_addr = (mhp->attr.pbl_addr - rhp->rdev.rnic_info.pbl_base) >> 3; PDBG("%s user resp pbl_addr 0x%x\n", __FUNCTION__, -- cgit v1.2.3-59-g8ed1b From 6561168cb442be8d2769dce663870b6a28573e16 Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Fri, 7 Sep 2007 11:11:10 -0700 Subject: ocfs2_dlm: Call node eviction callbacks from heartbeat handler With this, a dlm client can take advantage of the group protocol in the dlm to get full notification whenever a node within the dlm domain leaves unexpectedly. Signed-off-by: Mark Fasheh --- fs/ocfs2/dlm/dlmrecovery.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c index 2fde7bf91434..b10f3e313fbf 100644 --- a/fs/ocfs2/dlm/dlmrecovery.c +++ b/fs/ocfs2/dlm/dlmrecovery.c @@ -2321,6 +2321,13 @@ void dlm_hb_node_down_cb(struct o2nm_node *node, int idx, void *data) if (!dlm_grab(dlm)) return; + /* + * This will notify any dlm users that a node in our domain + * went away without notifying us first. + */ + if (test_bit(idx, dlm->domain_map)) + dlm_fire_domain_eviction_callbacks(dlm, idx); + spin_lock(&dlm->spinlock); __dlm_hb_node_down(dlm, idx); spin_unlock(&dlm->spinlock); -- cgit v1.2.3-59-g8ed1b From 6f7b056ea9c6fa978c79ca626eff43549df94dbb Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Mon, 24 Sep 2007 15:09:41 -0700 Subject: ocfs2: Remove fs dependency on ocfs2_heartbeat module Now that the dlm exposes domain information to us, we don't need generic node up / node down callbacks. And since the DLM is only telling us when a node goes down unexpectedly, we no longer need to optimize away node down callbacks via the umount map. Signed-off-by: Mark Fasheh --- fs/ocfs2/heartbeat.c | 73 ---------------------------------------------------- fs/ocfs2/heartbeat.h | 2 -- fs/ocfs2/super.c | 8 ------ 3 files changed, 83 deletions(-) diff --git a/fs/ocfs2/heartbeat.c b/fs/ocfs2/heartbeat.c index c4c36171240d..6239fc52790c 100644 --- a/fs/ocfs2/heartbeat.c +++ b/fs/ocfs2/heartbeat.c @@ -30,9 +30,6 @@ #include #include -#include -#include - #include #define MLOG_MASK_PREFIX ML_SUPER @@ -48,9 +45,6 @@ #include "buffer_head_io.h" -#define OCFS2_HB_NODE_DOWN_PRI (0x0000002) -#define OCFS2_HB_NODE_UP_PRI OCFS2_HB_NODE_DOWN_PRI - static inline void __ocfs2_node_map_set_bit(struct ocfs2_node_map *map, int bit); static inline void __ocfs2_node_map_clear_bit(struct ocfs2_node_map *map, @@ -87,26 +81,11 @@ static void ocfs2_do_node_down(int node_num, return; } - if (ocfs2_node_map_test_bit(osb, &osb->umount_map, node_num)) { - /* If a node is in the umount map, then we've been - * expecting him to go down and we know ahead of time - * that recovery is not necessary. */ - ocfs2_node_map_clear_bit(osb, &osb->umount_map, node_num); - return; - } - ocfs2_recovery_thread(osb, node_num); ocfs2_remove_node_from_vote_queues(osb, node_num); } -static void ocfs2_hb_node_down_cb(struct o2nm_node *node, - int node_num, - void *data) -{ - ocfs2_do_node_down(node_num, (struct ocfs2_super *) data); -} - /* Called from the dlm when it's about to evict a node. We may also * get a heartbeat callback later. */ static void ocfs2_dlm_eviction_cb(int node_num, @@ -121,27 +100,8 @@ static void ocfs2_dlm_eviction_cb(int node_num, ocfs2_do_node_down(node_num, osb); } -static void ocfs2_hb_node_up_cb(struct o2nm_node *node, - int node_num, - void *data) -{ - struct ocfs2_super *osb = data; - - BUG_ON(osb->node_num == node_num); - - mlog(0, "node up event for %d\n", node_num); - ocfs2_node_map_clear_bit(osb, &osb->umount_map, node_num); -} - void ocfs2_setup_hb_callbacks(struct ocfs2_super *osb) { - o2hb_setup_callback(&osb->osb_hb_down, O2HB_NODE_DOWN_CB, - ocfs2_hb_node_down_cb, osb, - OCFS2_HB_NODE_DOWN_PRI); - - o2hb_setup_callback(&osb->osb_hb_up, O2HB_NODE_UP_CB, - ocfs2_hb_node_up_cb, osb, OCFS2_HB_NODE_UP_PRI); - /* Not exactly a heartbeat callback, but leads to essentially * the same path so we set it up here. */ dlm_setup_eviction_cb(&osb->osb_eviction_cb, @@ -149,39 +109,6 @@ void ocfs2_setup_hb_callbacks(struct ocfs2_super *osb) osb); } -/* Most functions here are just stubs for now... */ -int ocfs2_register_hb_callbacks(struct ocfs2_super *osb) -{ - int status; - - if (ocfs2_mount_local(osb)) - return 0; - - status = o2hb_register_callback(osb->uuid_str, &osb->osb_hb_down); - if (status < 0) { - mlog_errno(status); - goto bail; - } - - status = o2hb_register_callback(osb->uuid_str, &osb->osb_hb_up); - if (status < 0) { - mlog_errno(status); - o2hb_unregister_callback(osb->uuid_str, &osb->osb_hb_down); - } - -bail: - return status; -} - -void ocfs2_clear_hb_callbacks(struct ocfs2_super *osb) -{ - if (ocfs2_mount_local(osb)) - return; - - o2hb_unregister_callback(osb->uuid_str, &osb->osb_hb_down); - o2hb_unregister_callback(osb->uuid_str, &osb->osb_hb_up); -} - void ocfs2_stop_heartbeat(struct ocfs2_super *osb) { int ret; diff --git a/fs/ocfs2/heartbeat.h b/fs/ocfs2/heartbeat.h index e8fb079122e4..56859211888a 100644 --- a/fs/ocfs2/heartbeat.h +++ b/fs/ocfs2/heartbeat.h @@ -29,8 +29,6 @@ void ocfs2_init_node_maps(struct ocfs2_super *osb); void ocfs2_setup_hb_callbacks(struct ocfs2_super *osb); -int ocfs2_register_hb_callbacks(struct ocfs2_super *osb); -void ocfs2_clear_hb_callbacks(struct ocfs2_super *osb); void ocfs2_stop_heartbeat(struct ocfs2_super *osb); /* node map functions - used to keep track of mounted and in-recovery diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index 5ee775420665..64b81b341ece 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -1117,12 +1117,6 @@ static int ocfs2_mount_volume(struct super_block *sb) goto leave; } - status = ocfs2_register_hb_callbacks(osb); - if (status < 0) { - mlog_errno(status); - goto leave; - } - status = ocfs2_dlm_init(osb); if (status < 0) { mlog_errno(status); @@ -1260,8 +1254,6 @@ static void ocfs2_dismount_volume(struct super_block *sb, int mnt_err) ocfs2_dlm_shutdown(osb); } - ocfs2_clear_hb_callbacks(osb); - debugfs_remove(osb->osb_debug_root); if (!mnt_err) -- cgit v1.2.3-59-g8ed1b From 34d024f84345807bf44163fac84e921513dde323 Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Mon, 24 Sep 2007 15:56:19 -0700 Subject: ocfs2: Remove mount/unmount votes The node maps that are set/unset by these votes are no longer relevant, thus we can remove the mount and umount votes. Since those are the last two remaining votes, we can also remove the entire vote infrastructure. The vote thread has been renamed to the downconvert thread, and the small amount of functionality related to managing it has been moved into fs/ocfs2/dlmglue.c. All references to votes have been removed or updated. Signed-off-by: Mark Fasheh --- fs/ocfs2/Makefile | 3 +- fs/ocfs2/cluster/tcp_internal.h | 5 +- fs/ocfs2/dcache.c | 8 +- fs/ocfs2/dlmglue.c | 164 +++++++-- fs/ocfs2/dlmglue.h | 5 +- fs/ocfs2/heartbeat.c | 7 - fs/ocfs2/inode.c | 36 +- fs/ocfs2/journal.c | 15 +- fs/ocfs2/namei.c | 10 +- fs/ocfs2/ocfs2.h | 25 +- fs/ocfs2/slot_map.c | 19 - fs/ocfs2/slot_map.h | 2 - fs/ocfs2/super.c | 43 +-- fs/ocfs2/vote.c | 756 ---------------------------------------- fs/ocfs2/vote.h | 48 --- 15 files changed, 179 insertions(+), 967 deletions(-) delete mode 100644 fs/ocfs2/vote.c delete mode 100644 fs/ocfs2/vote.h diff --git a/fs/ocfs2/Makefile b/fs/ocfs2/Makefile index 9fb8132f19b0..d2057e7fbda7 100644 --- a/fs/ocfs2/Makefile +++ b/fs/ocfs2/Makefile @@ -27,8 +27,7 @@ ocfs2-objs := \ symlink.o \ sysfile.o \ uptodate.o \ - ver.o \ - vote.o + ver.o obj-$(CONFIG_OCFS2_FS) += cluster/ obj-$(CONFIG_OCFS2_FS) += dlm/ diff --git a/fs/ocfs2/cluster/tcp_internal.h b/fs/ocfs2/cluster/tcp_internal.h index 9606111fe89d..79bd6665b3ca 100644 --- a/fs/ocfs2/cluster/tcp_internal.h +++ b/fs/ocfs2/cluster/tcp_internal.h @@ -38,6 +38,9 @@ * locking semantics of the file system using the protocol. It should * be somewhere else, I'm sure, but right now it isn't. * + * New in version 9: + * - All votes removed + * * New in version 8: * - Replace delete inode votes with a cluster lock * @@ -60,7 +63,7 @@ * - full 64 bit i_size in the metadata lock lvbs * - introduction of "rw" lock and pushing meta/data locking down */ -#define O2NET_PROTOCOL_VERSION 8ULL +#define O2NET_PROTOCOL_VERSION 9ULL struct o2net_handshake { __be64 protocol_version; __be64 connector_id; diff --git a/fs/ocfs2/dcache.c b/fs/ocfs2/dcache.c index 9923278ea6d4..b1cc7c381e88 100644 --- a/fs/ocfs2/dcache.c +++ b/fs/ocfs2/dcache.c @@ -128,9 +128,9 @@ static int ocfs2_match_dentry(struct dentry *dentry, /* * Walk the inode alias list, and find a dentry which has a given * parent. ocfs2_dentry_attach_lock() wants to find _any_ alias as it - * is looking for a dentry_lock reference. The vote thread is looking - * to unhash aliases, so we allow it to skip any that already have - * that property. + * is looking for a dentry_lock reference. The downconvert thread is + * looking to unhash aliases, so we allow it to skip any that already + * have that property. */ struct dentry *ocfs2_find_local_alias(struct inode *inode, u64 parent_blkno, @@ -266,7 +266,7 @@ int ocfs2_dentry_attach_lock(struct dentry *dentry, dl->dl_count = 0; /* * Does this have to happen below, for all attaches, in case - * the struct inode gets blown away by votes? + * the struct inode gets blown away by the downconvert thread? */ dl->dl_inode = igrab(inode); dl->dl_parent_blkno = parent_blkno; diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index 4e97dcceaf8f..b3068ade3f7b 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -55,7 +55,6 @@ #include "slot_map.h" #include "super.h" #include "uptodate.h" -#include "vote.h" #include "buffer_head_io.h" @@ -153,10 +152,10 @@ struct ocfs2_lock_res_ops { struct ocfs2_super * (*get_osb)(struct ocfs2_lock_res *); /* - * Optionally called in the downconvert (or "vote") thread - * after a successful downconvert. The lockres will not be - * referenced after this callback is called, so it is safe to - * free memory, etc. + * Optionally called in the downconvert thread after a + * successful downconvert. The lockres will not be referenced + * after this callback is called, so it is safe to free + * memory, etc. * * The exact semantics of when this is called are controlled * by ->downconvert_worker() @@ -310,8 +309,9 @@ static inline void ocfs2_recover_from_dlm_error(struct ocfs2_lock_res *lockres, "resource %s: %s\n", dlm_errname(_stat), _func, \ _lockres->l_name, dlm_errmsg(_stat)); \ } while (0) -static void ocfs2_vote_on_unlock(struct ocfs2_super *osb, - struct ocfs2_lock_res *lockres); +static int ocfs2_downconvert_thread(void *arg); +static void ocfs2_downconvert_on_unlock(struct ocfs2_super *osb, + struct ocfs2_lock_res *lockres); static int ocfs2_meta_lock_update(struct inode *inode, struct buffer_head **bh); static void ocfs2_drop_osb_locks(struct ocfs2_super *osb); @@ -732,7 +732,7 @@ static void ocfs2_blocking_ast(void *opaque, int level) wake_up(&lockres->l_event); - ocfs2_kick_vote_thread(osb); + ocfs2_wake_downconvert_thread(osb); } static void ocfs2_locking_ast(void *opaque) @@ -1089,7 +1089,7 @@ static void ocfs2_cluster_unlock(struct ocfs2_super *osb, mlog_entry_void(); spin_lock_irqsave(&lockres->l_lock, flags); ocfs2_dec_holders(lockres, level); - ocfs2_vote_on_unlock(osb, lockres); + ocfs2_downconvert_on_unlock(osb, lockres); spin_unlock_irqrestore(&lockres->l_lock, flags); mlog_exit_void(); } @@ -1372,15 +1372,15 @@ int ocfs2_data_lock_with_page(struct inode *inode, return ret; } -static void ocfs2_vote_on_unlock(struct ocfs2_super *osb, - struct ocfs2_lock_res *lockres) +static void ocfs2_downconvert_on_unlock(struct ocfs2_super *osb, + struct ocfs2_lock_res *lockres) { int kick = 0; mlog_entry_void(); /* If we know that another node is waiting on our lock, kick - * the vote thread * pre-emptively when we reach a release + * the downconvert thread * pre-emptively when we reach a release * condition. */ if (lockres->l_flags & OCFS2_LOCK_BLOCKED) { switch(lockres->l_blocking) { @@ -1398,7 +1398,7 @@ static void ocfs2_vote_on_unlock(struct ocfs2_super *osb, } if (kick) - ocfs2_kick_vote_thread(osb); + ocfs2_wake_downconvert_thread(osb); mlog_exit_void(); } @@ -1832,19 +1832,20 @@ bail: } /* - * This is working around a lock inversion between tasks acquiring DLM locks - * while holding a page lock and the vote thread which blocks dlm lock acquiry - * while acquiring page locks. + * This is working around a lock inversion between tasks acquiring DLM + * locks while holding a page lock and the downconvert thread which + * blocks dlm lock acquiry while acquiring page locks. * * ** These _with_page variantes are only intended to be called from aop * methods that hold page locks and return a very specific *positive* error * code that aop methods pass up to the VFS -- test for errors with != 0. ** * - * The DLM is called such that it returns -EAGAIN if it would have blocked - * waiting for the vote thread. In that case we unlock our page so the vote - * thread can make progress. Once we've done this we have to return - * AOP_TRUNCATED_PAGE so the aop method that called us can bubble that back up - * into the VFS who will then immediately retry the aop call. + * The DLM is called such that it returns -EAGAIN if it would have + * blocked waiting for the downconvert thread. In that case we unlock + * our page so the downconvert thread can make progress. Once we've + * done this we have to return AOP_TRUNCATED_PAGE so the aop method + * that called us can bubble that back up into the VFS who will then + * immediately retry the aop call. * * We do a blocking lock and immediate unlock before returning, though, so that * the lock has a great chance of being cached on this node by the time the VFS @@ -2320,11 +2321,11 @@ int ocfs2_dlm_init(struct ocfs2_super *osb) goto bail; } - /* launch vote thread */ - osb->vote_task = kthread_run(ocfs2_vote_thread, osb, "ocfs2vote"); - if (IS_ERR(osb->vote_task)) { - status = PTR_ERR(osb->vote_task); - osb->vote_task = NULL; + /* launch downconvert thread */ + osb->dc_task = kthread_run(ocfs2_downconvert_thread, osb, "ocfs2dc"); + if (IS_ERR(osb->dc_task)) { + status = PTR_ERR(osb->dc_task); + osb->dc_task = NULL; mlog_errno(status); goto bail; } @@ -2353,8 +2354,8 @@ local: bail: if (status < 0) { ocfs2_dlm_shutdown_debug(osb); - if (osb->vote_task) - kthread_stop(osb->vote_task); + if (osb->dc_task) + kthread_stop(osb->dc_task); } mlog_exit(status); @@ -2369,9 +2370,9 @@ void ocfs2_dlm_shutdown(struct ocfs2_super *osb) ocfs2_drop_osb_locks(osb); - if (osb->vote_task) { - kthread_stop(osb->vote_task); - osb->vote_task = NULL; + if (osb->dc_task) { + kthread_stop(osb->dc_task); + osb->dc_task = NULL; } ocfs2_lock_res_free(&osb->osb_super_lockres); @@ -2527,7 +2528,7 @@ out: /* Mark the lockres as being dropped. It will no longer be * queued if blocking, but we still may have to wait on it - * being dequeued from the vote thread before we can consider + * being dequeued from the downconvert thread before we can consider * it safe to drop. * * You can *not* attempt to call cluster_lock on this lockres anymore. */ @@ -2903,7 +2904,7 @@ static void ocfs2_set_meta_lvb(struct ocfs2_lock_res *lockres) /* * Does the final reference drop on our dentry lock. Right now this - * happens in the vote thread, but we could choose to simplify the + * happens in the downconvert thread, but we could choose to simplify the * dlmglue API and push these off to the ocfs2_wq in the future. */ static void ocfs2_dentry_post_unlock(struct ocfs2_super *osb, @@ -3042,7 +3043,7 @@ void ocfs2_process_blocked_lock(struct ocfs2_super *osb, mlog(0, "lockres %s blocked.\n", lockres->l_name); /* Detect whether a lock has been marked as going away while - * the vote thread was processing other things. A lock can + * the downconvert thread was processing other things. A lock can * still be marked with OCFS2_LOCK_FREEING after this check, * but short circuiting here will still save us some * performance. */ @@ -3091,13 +3092,104 @@ static void ocfs2_schedule_blocked_lock(struct ocfs2_super *osb, lockres_or_flags(lockres, OCFS2_LOCK_QUEUED); - spin_lock(&osb->vote_task_lock); + spin_lock(&osb->dc_task_lock); if (list_empty(&lockres->l_blocked_list)) { list_add_tail(&lockres->l_blocked_list, &osb->blocked_lock_list); osb->blocked_lock_count++; } - spin_unlock(&osb->vote_task_lock); + spin_unlock(&osb->dc_task_lock); mlog_exit_void(); } + +static void ocfs2_downconvert_thread_do_work(struct ocfs2_super *osb) +{ + unsigned long processed; + struct ocfs2_lock_res *lockres; + + mlog_entry_void(); + + spin_lock(&osb->dc_task_lock); + /* grab this early so we know to try again if a state change and + * wake happens part-way through our work */ + osb->dc_work_sequence = osb->dc_wake_sequence; + + processed = osb->blocked_lock_count; + while (processed) { + BUG_ON(list_empty(&osb->blocked_lock_list)); + + lockres = list_entry(osb->blocked_lock_list.next, + struct ocfs2_lock_res, l_blocked_list); + list_del_init(&lockres->l_blocked_list); + osb->blocked_lock_count--; + spin_unlock(&osb->dc_task_lock); + + BUG_ON(!processed); + processed--; + + ocfs2_process_blocked_lock(osb, lockres); + + spin_lock(&osb->dc_task_lock); + } + spin_unlock(&osb->dc_task_lock); + + mlog_exit_void(); +} + +static int ocfs2_downconvert_thread_lists_empty(struct ocfs2_super *osb) +{ + int empty = 0; + + spin_lock(&osb->dc_task_lock); + if (list_empty(&osb->blocked_lock_list)) + empty = 1; + + spin_unlock(&osb->dc_task_lock); + return empty; +} + +static int ocfs2_downconvert_thread_should_wake(struct ocfs2_super *osb) +{ + int should_wake = 0; + + spin_lock(&osb->dc_task_lock); + if (osb->dc_work_sequence != osb->dc_wake_sequence) + should_wake = 1; + spin_unlock(&osb->dc_task_lock); + + return should_wake; +} + +int ocfs2_downconvert_thread(void *arg) +{ + int status = 0; + struct ocfs2_super *osb = arg; + + /* only quit once we've been asked to stop and there is no more + * work available */ + while (!(kthread_should_stop() && + ocfs2_downconvert_thread_lists_empty(osb))) { + + wait_event_interruptible(osb->dc_event, + ocfs2_downconvert_thread_should_wake(osb) || + kthread_should_stop()); + + mlog(0, "downconvert_thread: awoken\n"); + + ocfs2_downconvert_thread_do_work(osb); + } + + osb->dc_task = NULL; + return status; +} + +void ocfs2_wake_downconvert_thread(struct ocfs2_super *osb) +{ + spin_lock(&osb->dc_task_lock); + /* make sure the voting thread gets a swipe at whatever changes + * the caller may have made to the voting state */ + osb->dc_wake_sequence++; + spin_unlock(&osb->dc_task_lock); + wake_up(&osb->dc_event); +} diff --git a/fs/ocfs2/dlmglue.h b/fs/ocfs2/dlmglue.h index 87a785e41205..931f6ee55146 100644 --- a/fs/ocfs2/dlmglue.h +++ b/fs/ocfs2/dlmglue.h @@ -54,7 +54,7 @@ struct ocfs2_meta_lvb { #define OCFS2_META_LOCK_RECOVERY (0x01) /* Instruct the dlm not to queue ourselves on the other node. */ #define OCFS2_META_LOCK_NOQUEUE (0x02) -/* don't block waiting for the vote thread, instead return -EAGAIN */ +/* don't block waiting for the downconvert thread, instead return -EAGAIN */ #define OCFS2_LOCK_NONBLOCK (0x04) int ocfs2_dlm_init(struct ocfs2_super *osb); @@ -112,9 +112,10 @@ void ocfs2_mark_lockres_freeing(struct ocfs2_lock_res *lockres); void ocfs2_simple_drop_lockres(struct ocfs2_super *osb, struct ocfs2_lock_res *lockres); -/* for the vote thread */ +/* for the downconvert thread */ void ocfs2_process_blocked_lock(struct ocfs2_super *osb, struct ocfs2_lock_res *lockres); +void ocfs2_wake_downconvert_thread(struct ocfs2_super *osb); struct ocfs2_dlm_debug *ocfs2_new_dlm_debug(void); void ocfs2_put_dlm_debug(struct ocfs2_dlm_debug *dlm_debug); diff --git a/fs/ocfs2/heartbeat.c b/fs/ocfs2/heartbeat.c index 6239fc52790c..c0efd9489fe8 100644 --- a/fs/ocfs2/heartbeat.c +++ b/fs/ocfs2/heartbeat.c @@ -41,7 +41,6 @@ #include "heartbeat.h" #include "inode.h" #include "journal.h" -#include "vote.h" #include "buffer_head_io.h" @@ -58,9 +57,7 @@ static void __ocfs2_node_map_set(struct ocfs2_node_map *target, void ocfs2_init_node_maps(struct ocfs2_super *osb) { spin_lock_init(&osb->node_map_lock); - ocfs2_node_map_init(&osb->mounted_map); ocfs2_node_map_init(&osb->recovery_map); - ocfs2_node_map_init(&osb->umount_map); ocfs2_node_map_init(&osb->osb_recovering_orphan_dirs); } @@ -82,8 +79,6 @@ static void ocfs2_do_node_down(int node_num, } ocfs2_recovery_thread(osb, node_num); - - ocfs2_remove_node_from_vote_queues(osb, node_num); } /* Called from the dlm when it's about to evict a node. We may also @@ -268,8 +263,6 @@ int ocfs2_recovery_map_set(struct ocfs2_super *osb, spin_lock(&osb->node_map_lock); - __ocfs2_node_map_clear_bit(&osb->mounted_map, num); - if (!test_bit(num, osb->recovery_map.map)) { __ocfs2_node_map_set_bit(&osb->recovery_map, num); set = 1; diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c index ebb2bbe30f35..86cf073996b5 100644 --- a/fs/ocfs2/inode.c +++ b/fs/ocfs2/inode.c @@ -49,7 +49,6 @@ #include "symlink.h" #include "sysfile.h" #include "uptodate.h" -#include "vote.h" #include "buffer_head_io.h" @@ -718,8 +717,8 @@ static int ocfs2_wipe_inode(struct inode *inode, } /* we do this while holding the orphan dir lock because we - * don't want recovery being run from another node to vote for - * an inode delete on us -- this will result in two nodes + * don't want recovery being run from another node to try an + * inode delete underneath us -- this will result in two nodes * truncating the same file! */ status = ocfs2_truncate_for_delete(osb, inode, di_bh); if (status < 0) { @@ -744,7 +743,7 @@ bail: } /* There is a series of simple checks that should be done before a - * vote is even considered. Encapsulate those in this function. */ + * trylock is even considered. Encapsulate those in this function. */ static int ocfs2_inode_is_valid_to_delete(struct inode *inode) { int ret = 0; @@ -758,14 +757,14 @@ static int ocfs2_inode_is_valid_to_delete(struct inode *inode) goto bail; } - /* If we're coming from process_vote we can't go into our own + /* If we're coming from downconvert_thread we can't go into our own * voting [hello, deadlock city!], so unforuntately we just * have to skip deleting this guy. That's OK though because * the node who's doing the actual deleting should handle it * anyway. */ - if (current == osb->vote_task) { + if (current == osb->dc_task) { mlog(0, "Skipping delete of %lu because we're currently " - "in process_vote\n", inode->i_ino); + "in downconvert\n", inode->i_ino); goto bail; } @@ -779,10 +778,9 @@ static int ocfs2_inode_is_valid_to_delete(struct inode *inode) goto bail_unlock; } - /* If we have voted "yes" on the wipe of this inode for - * another node, it will be marked here so we can safely skip - * it. Recovery will cleanup any inodes we might inadvertantly - * skip here. */ + /* If we have allowd wipe of this inode for another node, it + * will be marked here so we can safely skip it. Recovery will + * cleanup any inodes we might inadvertantly skip here. */ if (oi->ip_flags & OCFS2_INODE_SKIP_DELETE) { mlog(0, "Skipping delete of %lu because another node " "has done this for us.\n", inode->i_ino); @@ -929,7 +927,7 @@ void ocfs2_delete_inode(struct inode *inode) /* Lock down the inode. This gives us an up to date view of * it's metadata (for verification), and allows us to - * serialize delete_inode votes. + * serialize delete_inode on multiple nodes. * * Even though we might be doing a truncate, we don't take the * allocation lock here as it won't be needed - nobody will @@ -947,15 +945,15 @@ void ocfs2_delete_inode(struct inode *inode) * before we go ahead and wipe the inode. */ status = ocfs2_query_inode_wipe(inode, di_bh, &wipe); if (!wipe || status < 0) { - /* Error and inode busy vote both mean we won't be + /* Error and remote inode busy both mean we won't be * removing the inode, so they take almost the same * path. */ if (status < 0) mlog_errno(status); - /* Someone in the cluster has voted to not wipe this - * inode, or it was never completely orphaned. Write - * out the pages and exit now. */ + /* Someone in the cluster has disallowed a wipe of + * this inode, or it was never completely + * orphaned. Write out the pages and exit now. */ ocfs2_cleanup_delete_inode(inode, 1); goto bail_unlock_inode; } @@ -1008,12 +1006,12 @@ void ocfs2_clear_inode(struct inode *inode) mlog_bug_on_msg(OCFS2_SB(inode->i_sb) == NULL, "Inode=%lu\n", inode->i_ino); - /* For remove delete_inode vote, we hold open lock before, - * now it is time to unlock PR and EX open locks. */ + /* To preven remote deletes we hold open lock before, now it + * is time to unlock PR and EX open locks. */ ocfs2_open_unlock(inode); /* Do these before all the other work so that we don't bounce - * the vote thread while waiting to destroy the locks. */ + * the downconvert thread while waiting to destroy the locks. */ ocfs2_mark_lockres_freeing(&oi->ip_rw_lockres); ocfs2_mark_lockres_freeing(&oi->ip_meta_lockres); ocfs2_mark_lockres_freeing(&oi->ip_data_lockres); diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c index 8d81f6c1b877..f2ebe2eb3c21 100644 --- a/fs/ocfs2/journal.c +++ b/fs/ocfs2/journal.c @@ -44,7 +44,6 @@ #include "localalloc.h" #include "slot_map.h" #include "super.h" -#include "vote.h" #include "sysfile.h" #include "buffer_head_io.h" @@ -103,7 +102,7 @@ static int ocfs2_commit_cache(struct ocfs2_super *osb) mlog(0, "commit_thread: flushed transaction %lu (%u handles)\n", journal->j_trans_id, flushed); - ocfs2_kick_vote_thread(osb); + ocfs2_wake_downconvert_thread(osb); wake_up(&journal->j_checkpointed); finally: mlog_exit(status); @@ -883,8 +882,8 @@ restart: ocfs2_super_unlock(osb, 1); /* We always run recovery on our own orphan dir - the dead - * node(s) may have voted "no" on an inode delete earlier. A - * revote is therefore required. */ + * node(s) may have disallowd a previos inode delete. Re-processing + * is therefore required. */ ocfs2_queue_recovery_completion(osb->journal, osb->slot_num, NULL, NULL); @@ -1380,10 +1379,10 @@ static int ocfs2_recover_orphans(struct ocfs2_super *osb, iter = oi->ip_next_orphan; spin_lock(&oi->ip_lock); - /* Delete voting may have set these on the assumption - * that the other node would wipe them successfully. - * If they are still in the node's orphan dir, we need - * to reset that state. */ + /* The remote delete code may have set these on the + * assumption that the other node would wipe them + * successfully. If they are still in the node's + * orphan dir, we need to reset that state. */ oi->ip_flags &= ~(OCFS2_INODE_DELETED|OCFS2_INODE_SKIP_DELETE); /* Set the proper information to get us going into diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c index 989ac2718587..6295fd6ae469 100644 --- a/fs/ocfs2/namei.c +++ b/fs/ocfs2/namei.c @@ -60,7 +60,6 @@ #include "symlink.h" #include "sysfile.h" #include "uptodate.h" -#include "vote.h" #include "buffer_head_io.h" @@ -176,7 +175,7 @@ bail_unlock: /* Don't drop the cluster lock until *after* the d_add -- * unlink on another node will message us to remove that * dentry under this lock so otherwise we can race this with - * the vote thread and have a stale dentry. */ + * the downconvert thread and have a stale dentry. */ ocfs2_meta_unlock(dir, 0); bail: @@ -765,7 +764,7 @@ static int ocfs2_unlink(struct inode *dir, status = ocfs2_remote_dentry_delete(dentry); if (status < 0) { - /* This vote should succeed under all normal + /* This remote delete should succeed under all normal * circumstances. */ mlog_errno(status); goto leave; @@ -1031,8 +1030,9 @@ static int ocfs2_rename(struct inode *old_dir, /* * Aside from allowing a meta data update, the locking here - * also ensures that the vote thread on other nodes won't have - * to concurrently downconvert the inode and the dentry locks. + * also ensures that the downconvert thread on other nodes + * won't have to concurrently downconvert the inode and the + * dentry locks. */ status = ocfs2_meta_lock(old_inode, &old_inode_bh, 1); if (status < 0) { diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h index 60a23e1906b0..f8f866144c6a 100644 --- a/fs/ocfs2/ocfs2.h +++ b/fs/ocfs2/ocfs2.h @@ -189,9 +189,7 @@ struct ocfs2_super struct ocfs2_slot_info *slot_info; spinlock_t node_map_lock; - struct ocfs2_node_map mounted_map; struct ocfs2_node_map recovery_map; - struct ocfs2_node_map umount_map; u64 root_blkno; u64 system_dir_blkno; @@ -254,28 +252,15 @@ struct ocfs2_super wait_queue_head_t recovery_event; - spinlock_t vote_task_lock; - struct task_struct *vote_task; - wait_queue_head_t vote_event; - unsigned long vote_wake_sequence; - unsigned long vote_work_sequence; + spinlock_t dc_task_lock; + struct task_struct *dc_task; + wait_queue_head_t dc_event; + unsigned long dc_wake_sequence; + unsigned long dc_work_sequence; struct list_head blocked_lock_list; unsigned long blocked_lock_count; - struct list_head vote_list; - int vote_count; - - u32 net_key; - spinlock_t net_response_lock; - unsigned int net_response_ids; - struct list_head net_response_list; - - struct o2hb_callback_func osb_hb_up; - struct o2hb_callback_func osb_hb_down; - - struct list_head osb_net_handlers; - wait_queue_head_t osb_mount_event; /* Truncate log info */ diff --git a/fs/ocfs2/slot_map.c b/fs/ocfs2/slot_map.c index af4882b62cfa..3a50ce555e64 100644 --- a/fs/ocfs2/slot_map.c +++ b/fs/ocfs2/slot_map.c @@ -48,25 +48,6 @@ static void __ocfs2_fill_slot(struct ocfs2_slot_info *si, s16 slot_num, s16 node_num); -/* Use the slot information we've collected to create a map of mounted - * nodes. Should be holding an EX on super block. assumes slot info is - * up to date. Note that we call this *after* we find a slot, so our - * own node should be set in the map too... */ -void ocfs2_populate_mounted_map(struct ocfs2_super *osb) -{ - int i; - struct ocfs2_slot_info *si = osb->slot_info; - - spin_lock(&si->si_lock); - - for (i = 0; i < si->si_size; i++) - if (si->si_global_node_nums[i] != OCFS2_INVALID_SLOT) - ocfs2_node_map_set_bit(osb, &osb->mounted_map, - si->si_global_node_nums[i]); - - spin_unlock(&si->si_lock); -} - /* post the slot information on disk into our slot_info struct. */ void ocfs2_update_slot_info(struct ocfs2_slot_info *si) { diff --git a/fs/ocfs2/slot_map.h b/fs/ocfs2/slot_map.h index d8c8ceed031b..1025872aaade 100644 --- a/fs/ocfs2/slot_map.h +++ b/fs/ocfs2/slot_map.h @@ -52,8 +52,6 @@ s16 ocfs2_node_num_to_slot(struct ocfs2_slot_info *si, void ocfs2_clear_slot(struct ocfs2_slot_info *si, s16 slot_num); -void ocfs2_populate_mounted_map(struct ocfs2_super *osb); - static inline int ocfs2_is_empty_slot(struct ocfs2_slot_info *si, int slot_num) { diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index 64b81b341ece..1996820488cc 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -65,7 +65,6 @@ #include "sysfile.h" #include "uptodate.h" #include "ver.h" -#include "vote.h" #include "buffer_head_io.h" @@ -1123,13 +1122,6 @@ static int ocfs2_mount_volume(struct super_block *sb) goto leave; } - /* requires vote_thread to be running. */ - status = ocfs2_register_net_handlers(osb); - if (status < 0) { - mlog_errno(status); - goto leave; - } - status = ocfs2_super_lock(osb, 1); if (status < 0) { mlog_errno(status); @@ -1144,8 +1136,6 @@ static int ocfs2_mount_volume(struct super_block *sb) goto leave; } - ocfs2_populate_mounted_map(osb); - /* load all node-local system inodes */ status = ocfs2_init_local_system_inodes(osb); if (status < 0) { @@ -1168,15 +1158,6 @@ static int ocfs2_mount_volume(struct super_block *sb) if (ocfs2_mount_local(osb)) goto leave; - /* This should be sent *after* we recovered our journal as it - * will cause other nodes to unmark us as needing - * recovery. However, we need to send it *before* dropping the - * super block lock as otherwise their recovery threads might - * try to clean us up while we're live! */ - status = ocfs2_request_mount_vote(osb); - if (status < 0) - mlog_errno(status); - leave: if (unlock_super) ocfs2_super_unlock(osb, 1); @@ -1234,10 +1215,6 @@ static void ocfs2_dismount_volume(struct super_block *sb, int mnt_err) mlog_errno(tmp); return; } - - tmp = ocfs2_request_umount_vote(osb); - if (tmp < 0) - mlog_errno(tmp); } if (osb->slot_num != OCFS2_INVALID_SLOT) @@ -1248,11 +1225,8 @@ static void ocfs2_dismount_volume(struct super_block *sb, int mnt_err) ocfs2_release_system_inodes(osb); - if (osb->dlm) { - ocfs2_unregister_net_handlers(osb); - + if (osb->dlm) ocfs2_dlm_shutdown(osb); - } debugfs_remove(osb->osb_debug_root); @@ -1336,19 +1310,13 @@ static int ocfs2_initialize_super(struct super_block *sb, osb->s_sectsize_bits = blksize_bits(sector_size); BUG_ON(!osb->s_sectsize_bits); - osb->net_response_ids = 0; - spin_lock_init(&osb->net_response_lock); - INIT_LIST_HEAD(&osb->net_response_list); - - INIT_LIST_HEAD(&osb->osb_net_handlers); init_waitqueue_head(&osb->recovery_event); - spin_lock_init(&osb->vote_task_lock); - init_waitqueue_head(&osb->vote_event); - osb->vote_work_sequence = 0; - osb->vote_wake_sequence = 0; + spin_lock_init(&osb->dc_task_lock); + init_waitqueue_head(&osb->dc_event); + osb->dc_work_sequence = 0; + osb->dc_wake_sequence = 0; INIT_LIST_HEAD(&osb->blocked_lock_list); osb->blocked_lock_count = 0; - INIT_LIST_HEAD(&osb->vote_list); spin_lock_init(&osb->osb_lock); atomic_set(&osb->alloc_stats.moves, 0); @@ -1488,7 +1456,6 @@ static int ocfs2_initialize_super(struct super_block *sb, } memcpy(&uuid_net_key, di->id2.i_super.s_uuid, sizeof(uuid_net_key)); - osb->net_key = le32_to_cpu(uuid_net_key); strncpy(osb->vol_label, di->id2.i_super.s_label, 63); osb->vol_label[63] = '\0'; diff --git a/fs/ocfs2/vote.c b/fs/ocfs2/vote.c deleted file mode 100644 index c05358538f2b..000000000000 --- a/fs/ocfs2/vote.c +++ /dev/null @@ -1,756 +0,0 @@ -/* -*- mode: c; c-basic-offset: 8; -*- - * vim: noexpandtab sw=8 ts=8 sts=0: - * - * vote.c - * - * description here - * - * Copyright (C) 2003, 2004 Oracle. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public - * License as published by the Free Software Foundation; either - * version 2 of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write to the - * Free Software Foundation, Inc., 59 Temple Place - Suite 330, - * Boston, MA 021110-1307, USA. - */ - -#include -#include -#include -#include - -#include -#include -#include - -#include - -#define MLOG_MASK_PREFIX ML_VOTE -#include - -#include "ocfs2.h" - -#include "alloc.h" -#include "dlmglue.h" -#include "extent_map.h" -#include "heartbeat.h" -#include "inode.h" -#include "journal.h" -#include "slot_map.h" -#include "vote.h" - -#include "buffer_head_io.h" - -#define OCFS2_MESSAGE_TYPE_VOTE (0x1) -#define OCFS2_MESSAGE_TYPE_RESPONSE (0x2) -struct ocfs2_msg_hdr -{ - __be32 h_response_id; /* used to lookup message handle on sending - * node. */ - __be32 h_request; - __be64 h_blkno; - __be32 h_generation; - __be32 h_node_num; /* node sending this particular message. */ -}; - -struct ocfs2_vote_msg -{ - struct ocfs2_msg_hdr v_hdr; - __be32 v_reserved1; -} __attribute__ ((packed)); - -/* Responses are given these values to maintain backwards - * compatibility with older ocfs2 versions */ -#define OCFS2_RESPONSE_OK (0) -#define OCFS2_RESPONSE_BUSY (-16) -#define OCFS2_RESPONSE_BAD_MSG (-22) - -struct ocfs2_response_msg -{ - struct ocfs2_msg_hdr r_hdr; - __be32 r_response; -} __attribute__ ((packed)); - -struct ocfs2_vote_work { - struct list_head w_list; - struct ocfs2_vote_msg w_msg; -}; - -enum ocfs2_vote_request { - OCFS2_VOTE_REQ_INVALID = 0, - OCFS2_VOTE_REQ_MOUNT, - OCFS2_VOTE_REQ_UMOUNT, - OCFS2_VOTE_REQ_LAST -}; - -static inline int ocfs2_is_valid_vote_request(int request) -{ - return OCFS2_VOTE_REQ_INVALID < request && - request < OCFS2_VOTE_REQ_LAST; -} - -typedef void (*ocfs2_net_response_callback)(void *priv, - struct ocfs2_response_msg *resp); -struct ocfs2_net_response_cb { - ocfs2_net_response_callback rc_cb; - void *rc_priv; -}; - -struct ocfs2_net_wait_ctxt { - struct list_head n_list; - u32 n_response_id; - wait_queue_head_t n_event; - struct ocfs2_node_map n_node_map; - int n_response; /* an agreggate response. 0 if - * all nodes are go, < 0 on any - * negative response from any - * node or network error. */ - struct ocfs2_net_response_cb *n_callback; -}; - -static void ocfs2_process_mount_request(struct ocfs2_super *osb, - unsigned int node_num) -{ - mlog(0, "MOUNT vote from node %u\n", node_num); - /* The other node only sends us this message when he has an EX - * on the superblock, so our recovery threads (if having been - * launched) are waiting on it.*/ - ocfs2_recovery_map_clear(osb, node_num); - ocfs2_node_map_set_bit(osb, &osb->mounted_map, node_num); - - /* We clear the umount map here because a node may have been - * previously mounted, safely unmounted but never stopped - * heartbeating - in which case we'd have a stale entry. */ - ocfs2_node_map_clear_bit(osb, &osb->umount_map, node_num); -} - -static void ocfs2_process_umount_request(struct ocfs2_super *osb, - unsigned int node_num) -{ - mlog(0, "UMOUNT vote from node %u\n", node_num); - ocfs2_node_map_clear_bit(osb, &osb->mounted_map, node_num); - ocfs2_node_map_set_bit(osb, &osb->umount_map, node_num); -} - -static void ocfs2_process_vote(struct ocfs2_super *osb, - struct ocfs2_vote_msg *msg) -{ - int net_status, vote_response; - unsigned int node_num; - u64 blkno; - enum ocfs2_vote_request request; - struct ocfs2_msg_hdr *hdr = &msg->v_hdr; - struct ocfs2_response_msg response; - - /* decode the network mumbo jumbo into local variables. */ - request = be32_to_cpu(hdr->h_request); - blkno = be64_to_cpu(hdr->h_blkno); - node_num = be32_to_cpu(hdr->h_node_num); - - mlog(0, "processing vote: request = %u, blkno = %llu, node_num = %u\n", - request, (unsigned long long)blkno, node_num); - - if (!ocfs2_is_valid_vote_request(request)) { - mlog(ML_ERROR, "Invalid vote request %d from node %u\n", - request, node_num); - vote_response = OCFS2_RESPONSE_BAD_MSG; - goto respond; - } - - vote_response = OCFS2_RESPONSE_OK; - - switch (request) { - case OCFS2_VOTE_REQ_UMOUNT: - ocfs2_process_umount_request(osb, node_num); - goto respond; - case OCFS2_VOTE_REQ_MOUNT: - ocfs2_process_mount_request(osb, node_num); - goto respond; - default: - /* avoids a gcc warning */ - break; - } - -respond: - /* Response struture is small so we just put it on the stack - * and stuff it inline. */ - memset(&response, 0, sizeof(struct ocfs2_response_msg)); - response.r_hdr.h_response_id = hdr->h_response_id; - response.r_hdr.h_blkno = hdr->h_blkno; - response.r_hdr.h_generation = hdr->h_generation; - response.r_hdr.h_node_num = cpu_to_be32(osb->node_num); - response.r_response = cpu_to_be32(vote_response); - - net_status = o2net_send_message(OCFS2_MESSAGE_TYPE_RESPONSE, - osb->net_key, - &response, - sizeof(struct ocfs2_response_msg), - node_num, - NULL); - /* We still want to error print for ENOPROTOOPT here. The - * sending node shouldn't have unregistered his net handler - * without sending an unmount vote 1st */ - if (net_status < 0 - && net_status != -ETIMEDOUT - && net_status != -ENOTCONN) - mlog(ML_ERROR, "message to node %u fails with error %d!\n", - node_num, net_status); -} - -static void ocfs2_vote_thread_do_work(struct ocfs2_super *osb) -{ - unsigned long processed; - struct ocfs2_lock_res *lockres; - struct ocfs2_vote_work *work; - - mlog_entry_void(); - - spin_lock(&osb->vote_task_lock); - /* grab this early so we know to try again if a state change and - * wake happens part-way through our work */ - osb->vote_work_sequence = osb->vote_wake_sequence; - - processed = osb->blocked_lock_count; - while (processed) { - BUG_ON(list_empty(&osb->blocked_lock_list)); - - lockres = list_entry(osb->blocked_lock_list.next, - struct ocfs2_lock_res, l_blocked_list); - list_del_init(&lockres->l_blocked_list); - osb->blocked_lock_count--; - spin_unlock(&osb->vote_task_lock); - - BUG_ON(!processed); - processed--; - - ocfs2_process_blocked_lock(osb, lockres); - - spin_lock(&osb->vote_task_lock); - } - - while (osb->vote_count) { - BUG_ON(list_empty(&osb->vote_list)); - work = list_entry(osb->vote_list.next, - struct ocfs2_vote_work, w_list); - list_del(&work->w_list); - osb->vote_count--; - spin_unlock(&osb->vote_task_lock); - - ocfs2_process_vote(osb, &work->w_msg); - kfree(work); - - spin_lock(&osb->vote_task_lock); - } - spin_unlock(&osb->vote_task_lock); - - mlog_exit_void(); -} - -static int ocfs2_vote_thread_lists_empty(struct ocfs2_super *osb) -{ - int empty = 0; - - spin_lock(&osb->vote_task_lock); - if (list_empty(&osb->blocked_lock_list) && - list_empty(&osb->vote_list)) - empty = 1; - - spin_unlock(&osb->vote_task_lock); - return empty; -} - -static int ocfs2_vote_thread_should_wake(struct ocfs2_super *osb) -{ - int should_wake = 0; - - spin_lock(&osb->vote_task_lock); - if (osb->vote_work_sequence != osb->vote_wake_sequence) - should_wake = 1; - spin_unlock(&osb->vote_task_lock); - - return should_wake; -} - -int ocfs2_vote_thread(void *arg) -{ - int status = 0; - struct ocfs2_super *osb = arg; - - /* only quit once we've been asked to stop and there is no more - * work available */ - while (!(kthread_should_stop() && - ocfs2_vote_thread_lists_empty(osb))) { - - wait_event_interruptible(osb->vote_event, - ocfs2_vote_thread_should_wake(osb) || - kthread_should_stop()); - - mlog(0, "vote_thread: awoken\n"); - - ocfs2_vote_thread_do_work(osb); - } - - osb->vote_task = NULL; - return status; -} - -static struct ocfs2_net_wait_ctxt *ocfs2_new_net_wait_ctxt(unsigned int response_id) -{ - struct ocfs2_net_wait_ctxt *w; - - w = kzalloc(sizeof(*w), GFP_NOFS); - if (!w) { - mlog_errno(-ENOMEM); - goto bail; - } - - INIT_LIST_HEAD(&w->n_list); - init_waitqueue_head(&w->n_event); - ocfs2_node_map_init(&w->n_node_map); - w->n_response_id = response_id; - w->n_callback = NULL; -bail: - return w; -} - -static unsigned int ocfs2_new_response_id(struct ocfs2_super *osb) -{ - unsigned int ret; - - spin_lock(&osb->net_response_lock); - ret = ++osb->net_response_ids; - spin_unlock(&osb->net_response_lock); - - return ret; -} - -static void ocfs2_dequeue_net_wait_ctxt(struct ocfs2_super *osb, - struct ocfs2_net_wait_ctxt *w) -{ - spin_lock(&osb->net_response_lock); - list_del(&w->n_list); - spin_unlock(&osb->net_response_lock); -} - -static void ocfs2_queue_net_wait_ctxt(struct ocfs2_super *osb, - struct ocfs2_net_wait_ctxt *w) -{ - spin_lock(&osb->net_response_lock); - list_add_tail(&w->n_list, - &osb->net_response_list); - spin_unlock(&osb->net_response_lock); -} - -static void __ocfs2_mark_node_responded(struct ocfs2_super *osb, - struct ocfs2_net_wait_ctxt *w, - int node_num) -{ - assert_spin_locked(&osb->net_response_lock); - - ocfs2_node_map_clear_bit(osb, &w->n_node_map, node_num); - if (ocfs2_node_map_is_empty(osb, &w->n_node_map)) - wake_up(&w->n_event); -} - -/* Intended to be called from the node down callback, we fake remove - * the node from all our response contexts */ -void ocfs2_remove_node_from_vote_queues(struct ocfs2_super *osb, - int node_num) -{ - struct list_head *p; - struct ocfs2_net_wait_ctxt *w = NULL; - - spin_lock(&osb->net_response_lock); - - list_for_each(p, &osb->net_response_list) { - w = list_entry(p, struct ocfs2_net_wait_ctxt, n_list); - - __ocfs2_mark_node_responded(osb, w, node_num); - } - - spin_unlock(&osb->net_response_lock); -} - -static int ocfs2_broadcast_vote(struct ocfs2_super *osb, - struct ocfs2_vote_msg *request, - unsigned int response_id, - int *response, - struct ocfs2_net_response_cb *callback) -{ - int status, i, remote_err; - struct ocfs2_net_wait_ctxt *w = NULL; - int dequeued = 0; - - mlog_entry_void(); - - w = ocfs2_new_net_wait_ctxt(response_id); - if (!w) { - status = -ENOMEM; - mlog_errno(status); - goto bail; - } - w->n_callback = callback; - - /* we're pretty much ready to go at this point, and this fills - * in n_response which we need anyway... */ - ocfs2_queue_net_wait_ctxt(osb, w); - - i = ocfs2_node_map_iterate(osb, &osb->mounted_map, 0); - - while (i != O2NM_INVALID_NODE_NUM) { - if (i != osb->node_num) { - mlog(0, "trying to send request to node %i\n", i); - ocfs2_node_map_set_bit(osb, &w->n_node_map, i); - - remote_err = 0; - status = o2net_send_message(OCFS2_MESSAGE_TYPE_VOTE, - osb->net_key, - request, - sizeof(*request), - i, - &remote_err); - if (status == -ETIMEDOUT) { - mlog(0, "remote node %d timed out!\n", i); - status = -EAGAIN; - goto bail; - } - if (remote_err < 0) { - status = remote_err; - mlog(0, "remote error %d on node %d!\n", - remote_err, i); - mlog_errno(status); - goto bail; - } - if (status < 0) { - mlog_errno(status); - goto bail; - } - } - i++; - i = ocfs2_node_map_iterate(osb, &osb->mounted_map, i); - mlog(0, "next is %d, i am %d\n", i, osb->node_num); - } - mlog(0, "done sending, now waiting on responses...\n"); - - wait_event(w->n_event, ocfs2_node_map_is_empty(osb, &w->n_node_map)); - - ocfs2_dequeue_net_wait_ctxt(osb, w); - dequeued = 1; - - *response = w->n_response; - status = 0; -bail: - if (w) { - if (!dequeued) - ocfs2_dequeue_net_wait_ctxt(osb, w); - kfree(w); - } - - mlog_exit(status); - return status; -} - -static struct ocfs2_vote_msg * ocfs2_new_vote_request(struct ocfs2_super *osb, - u64 blkno, - unsigned int generation, - enum ocfs2_vote_request type) -{ - struct ocfs2_vote_msg *request; - struct ocfs2_msg_hdr *hdr; - - BUG_ON(!ocfs2_is_valid_vote_request(type)); - - request = kzalloc(sizeof(*request), GFP_NOFS); - if (!request) { - mlog_errno(-ENOMEM); - } else { - hdr = &request->v_hdr; - hdr->h_node_num = cpu_to_be32(osb->node_num); - hdr->h_request = cpu_to_be32(type); - hdr->h_blkno = cpu_to_be64(blkno); - hdr->h_generation = cpu_to_be32(generation); - } - - return request; -} - -/* Complete the buildup of a new vote request and process the - * broadcast return value. */ -static int ocfs2_do_request_vote(struct ocfs2_super *osb, - struct ocfs2_vote_msg *request, - struct ocfs2_net_response_cb *callback) -{ - int status, response = -EBUSY; - unsigned int response_id; - struct ocfs2_msg_hdr *hdr; - - response_id = ocfs2_new_response_id(osb); - - hdr = &request->v_hdr; - hdr->h_response_id = cpu_to_be32(response_id); - - status = ocfs2_broadcast_vote(osb, request, response_id, &response, - callback); - if (status < 0) { - mlog_errno(status); - goto bail; - } - - status = response; -bail: - - return status; -} - -int ocfs2_request_mount_vote(struct ocfs2_super *osb) -{ - int status; - struct ocfs2_vote_msg *request = NULL; - - request = ocfs2_new_vote_request(osb, 0ULL, 0, OCFS2_VOTE_REQ_MOUNT); - if (!request) { - status = -ENOMEM; - goto bail; - } - - status = -EAGAIN; - while (status == -EAGAIN) { - if (!(osb->s_mount_opt & OCFS2_MOUNT_NOINTR) && - signal_pending(current)) { - status = -ERESTARTSYS; - goto bail; - } - - if (ocfs2_node_map_is_only(osb, &osb->mounted_map, - osb->node_num)) { - status = 0; - goto bail; - } - - status = ocfs2_do_request_vote(osb, request, NULL); - } - -bail: - kfree(request); - return status; -} - -int ocfs2_request_umount_vote(struct ocfs2_super *osb) -{ - int status; - struct ocfs2_vote_msg *request = NULL; - - request = ocfs2_new_vote_request(osb, 0ULL, 0, OCFS2_VOTE_REQ_UMOUNT); - if (!request) { - status = -ENOMEM; - goto bail; - } - - status = -EAGAIN; - while (status == -EAGAIN) { - /* Do not check signals on this vote... We really want - * this one to go all the way through. */ - - if (ocfs2_node_map_is_only(osb, &osb->mounted_map, - osb->node_num)) { - status = 0; - goto bail; - } - - status = ocfs2_do_request_vote(osb, request, NULL); - } - -bail: - kfree(request); - return status; -} - -/* TODO: This should eventually be a hash table! */ -static struct ocfs2_net_wait_ctxt * __ocfs2_find_net_wait_ctxt(struct ocfs2_super *osb, - u32 response_id) -{ - struct list_head *p; - struct ocfs2_net_wait_ctxt *w = NULL; - - list_for_each(p, &osb->net_response_list) { - w = list_entry(p, struct ocfs2_net_wait_ctxt, n_list); - if (response_id == w->n_response_id) - break; - w = NULL; - } - - return w; -} - -/* Translate response codes into local node errno values */ -static inline int ocfs2_translate_response(int response) -{ - int ret; - - switch (response) { - case OCFS2_RESPONSE_OK: - ret = 0; - break; - - case OCFS2_RESPONSE_BUSY: - ret = -EBUSY; - break; - - default: - ret = -EINVAL; - } - - return ret; -} - -static int ocfs2_handle_response_message(struct o2net_msg *msg, - u32 len, - void *data, void **ret_data) -{ - unsigned int response_id, node_num; - int response_status; - struct ocfs2_super *osb = data; - struct ocfs2_response_msg *resp; - struct ocfs2_net_wait_ctxt * w; - struct ocfs2_net_response_cb *resp_cb; - - resp = (struct ocfs2_response_msg *) msg->buf; - - response_id = be32_to_cpu(resp->r_hdr.h_response_id); - node_num = be32_to_cpu(resp->r_hdr.h_node_num); - response_status = - ocfs2_translate_response(be32_to_cpu(resp->r_response)); - - mlog(0, "received response message:\n"); - mlog(0, "h_response_id = %u\n", response_id); - mlog(0, "h_request = %u\n", be32_to_cpu(resp->r_hdr.h_request)); - mlog(0, "h_blkno = %llu\n", - (unsigned long long)be64_to_cpu(resp->r_hdr.h_blkno)); - mlog(0, "h_generation = %u\n", be32_to_cpu(resp->r_hdr.h_generation)); - mlog(0, "h_node_num = %u\n", node_num); - mlog(0, "r_response = %d\n", response_status); - - spin_lock(&osb->net_response_lock); - w = __ocfs2_find_net_wait_ctxt(osb, response_id); - if (!w) { - mlog(0, "request not found!\n"); - goto bail; - } - resp_cb = w->n_callback; - - if (response_status && (!w->n_response)) { - /* we only really need one negative response so don't - * set it twice. */ - w->n_response = response_status; - } - - if (resp_cb) { - spin_unlock(&osb->net_response_lock); - - resp_cb->rc_cb(resp_cb->rc_priv, resp); - - spin_lock(&osb->net_response_lock); - } - - __ocfs2_mark_node_responded(osb, w, node_num); -bail: - spin_unlock(&osb->net_response_lock); - - return 0; -} - -static int ocfs2_handle_vote_message(struct o2net_msg *msg, - u32 len, - void *data, void **ret_data) -{ - int status; - struct ocfs2_super *osb = data; - struct ocfs2_vote_work *work; - - work = kmalloc(sizeof(struct ocfs2_vote_work), GFP_NOFS); - if (!work) { - status = -ENOMEM; - mlog_errno(status); - goto bail; - } - - INIT_LIST_HEAD(&work->w_list); - memcpy(&work->w_msg, msg->buf, sizeof(struct ocfs2_vote_msg)); - - mlog(0, "scheduling vote request:\n"); - mlog(0, "h_response_id = %u\n", - be32_to_cpu(work->w_msg.v_hdr.h_response_id)); - mlog(0, "h_request = %u\n", be32_to_cpu(work->w_msg.v_hdr.h_request)); - mlog(0, "h_blkno = %llu\n", - (unsigned long long)be64_to_cpu(work->w_msg.v_hdr.h_blkno)); - mlog(0, "h_generation = %u\n", - be32_to_cpu(work->w_msg.v_hdr.h_generation)); - mlog(0, "h_node_num = %u\n", - be32_to_cpu(work->w_msg.v_hdr.h_node_num)); - - spin_lock(&osb->vote_task_lock); - list_add_tail(&work->w_list, &osb->vote_list); - osb->vote_count++; - spin_unlock(&osb->vote_task_lock); - - ocfs2_kick_vote_thread(osb); - - status = 0; -bail: - return status; -} - -void ocfs2_unregister_net_handlers(struct ocfs2_super *osb) -{ - if (!osb->net_key) - return; - - o2net_unregister_handler_list(&osb->osb_net_handlers); - - if (!list_empty(&osb->net_response_list)) - mlog(ML_ERROR, "net response list not empty!\n"); - - osb->net_key = 0; -} - -int ocfs2_register_net_handlers(struct ocfs2_super *osb) -{ - int status = 0; - - if (ocfs2_mount_local(osb)) - return 0; - - status = o2net_register_handler(OCFS2_MESSAGE_TYPE_RESPONSE, - osb->net_key, - sizeof(struct ocfs2_response_msg), - ocfs2_handle_response_message, - osb, NULL, &osb->osb_net_handlers); - if (status) { - mlog_errno(status); - goto bail; - } - - status = o2net_register_handler(OCFS2_MESSAGE_TYPE_VOTE, - osb->net_key, - sizeof(struct ocfs2_vote_msg), - ocfs2_handle_vote_message, - osb, NULL, &osb->osb_net_handlers); - if (status) { - mlog_errno(status); - goto bail; - } -bail: - if (status < 0) - ocfs2_unregister_net_handlers(osb); - - return status; -} diff --git a/fs/ocfs2/vote.h b/fs/ocfs2/vote.h deleted file mode 100644 index 9ea46f62de31..000000000000 --- a/fs/ocfs2/vote.h +++ /dev/null @@ -1,48 +0,0 @@ -/* -*- mode: c; c-basic-offset: 8; -*- - * vim: noexpandtab sw=8 ts=8 sts=0: - * - * vote.h - * - * description here - * - * Copyright (C) 2002, 2004 Oracle. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public - * License as published by the Free Software Foundation; either - * version 2 of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write to the - * Free Software Foundation, Inc., 59 Temple Place - Suite 330, - * Boston, MA 021110-1307, USA. - */ - - -#ifndef VOTE_H -#define VOTE_H - -int ocfs2_vote_thread(void *arg); -static inline void ocfs2_kick_vote_thread(struct ocfs2_super *osb) -{ - spin_lock(&osb->vote_task_lock); - /* make sure the voting thread gets a swipe at whatever changes - * the caller may have made to the voting state */ - osb->vote_wake_sequence++; - spin_unlock(&osb->vote_task_lock); - wake_up(&osb->vote_event); -} - -int ocfs2_request_mount_vote(struct ocfs2_super *osb); -int ocfs2_request_umount_vote(struct ocfs2_super *osb); -int ocfs2_register_net_handlers(struct ocfs2_super *osb); -void ocfs2_unregister_net_handlers(struct ocfs2_super *osb); - -void ocfs2_remove_node_from_vote_queues(struct ocfs2_super *osb, - int node_num); -#endif -- cgit v1.2.3-59-g8ed1b From f1f540688eae66c274ff1c1133b5d9c687b28f58 Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Thu, 18 Oct 2007 15:13:59 -0700 Subject: ocfs2: Add data downconvert worker to inode lock In order to extend inode lock coverage to inode data, we use the same data downconvert worker with only a small modification to only do work for regular files. Signed-off-by: Mark Fasheh --- fs/ocfs2/dlmglue.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index b3068ade3f7b..7e36abea8f40 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -228,6 +228,7 @@ static struct ocfs2_lock_res_ops ocfs2_inode_meta_lops = { .get_osb = ocfs2_get_inode_osb, .check_downconvert = ocfs2_check_meta_downconvert, .set_lvb = ocfs2_set_meta_lvb, + .downconvert_worker = ocfs2_data_convert_worker, .flags = LOCK_TYPE_REQUIRES_REFRESH|LOCK_TYPE_USES_LVB, }; @@ -2851,6 +2852,9 @@ static int ocfs2_data_convert_worker(struct ocfs2_lock_res *lockres, inode = ocfs2_lock_res_inode(lockres); mapping = inode->i_mapping; + if (S_ISREG(inode->i_mode)) + goto out; + /* * We need this before the filemap_fdatawrite() so that it can * transfer the dirty bit from the PTE to the @@ -2876,6 +2880,7 @@ static int ocfs2_data_convert_worker(struct ocfs2_lock_res *lockres, filemap_fdatawait(mapping); } +out: return UNBLOCK_CONTINUE; } -- cgit v1.2.3-59-g8ed1b From c934a92d05b549dd2f25db72c5fc3cb9dcf1b611 Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Thu, 18 Oct 2007 15:23:46 -0700 Subject: ocfs2: Remove data locks The meta lock now covers both meta data and data, so this just removes the now-redundant data lock. Combining locks saves us a round of lock mastery per inode and one less lock to ping between nodes during read/write. We don't lose much - since meta locks were always held before a data lock (and at the same level) ordered writeout mode (the default) ensured that flushing for the meta data lock also pushed out data anyways. Signed-off-by: Mark Fasheh --- fs/ocfs2/aops.c | 44 +---------------- fs/ocfs2/cluster/tcp_internal.h | 5 +- fs/ocfs2/dlmglue.c | 104 ---------------------------------------- fs/ocfs2/dlmglue.h | 11 +---- fs/ocfs2/file.c | 55 ++++++--------------- fs/ocfs2/inode.c | 6 --- fs/ocfs2/inode.h | 1 - fs/ocfs2/mmap.c | 9 ---- fs/ocfs2/super.c | 1 - 9 files changed, 22 insertions(+), 214 deletions(-) diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c index 56f7790cad46..5fc27cfaee50 100644 --- a/fs/ocfs2/aops.c +++ b/fs/ocfs2/aops.c @@ -305,21 +305,12 @@ static int ocfs2_readpage(struct file *file, struct page *page) goto out_alloc; } - ret = ocfs2_data_lock_with_page(inode, 0, page); - if (ret != 0) { - if (ret == AOP_TRUNCATED_PAGE) - unlock = 0; - mlog_errno(ret); - goto out_alloc; - } - if (oi->ip_dyn_features & OCFS2_INLINE_DATA_FL) ret = ocfs2_readpage_inline(inode, page); else ret = block_read_full_page(page, ocfs2_get_block); unlock = 0; - ocfs2_data_unlock(inode, 0); out_alloc: up_read(&OCFS2_I(inode)->ip_alloc_sem); out_meta_unlock: @@ -638,34 +629,12 @@ static ssize_t ocfs2_direct_IO(int rw, if (OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) return 0; - if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb))) { - /* - * We get PR data locks even for O_DIRECT. This - * allows concurrent O_DIRECT I/O but doesn't let - * O_DIRECT with extending and buffered zeroing writes - * race. If they did race then the buffered zeroing - * could be written back after the O_DIRECT I/O. It's - * one thing to tell people not to mix buffered and - * O_DIRECT writes, but expecting them to understand - * that file extension is also an implicit buffered - * write is too much. By getting the PR we force - * writeback of the buffered zeroing before - * proceeding. - */ - ret = ocfs2_data_lock(inode, 0); - if (ret < 0) { - mlog_errno(ret); - goto out; - } - ocfs2_data_unlock(inode, 0); - } - ret = blockdev_direct_IO_no_locking(rw, iocb, inode, inode->i_sb->s_bdev, iov, offset, nr_segs, ocfs2_direct_IO_get_blocks, ocfs2_dio_end_io); -out: + mlog_exit(ret); return ret; } @@ -1769,25 +1738,17 @@ static int ocfs2_write_begin(struct file *file, struct address_space *mapping, */ down_write(&OCFS2_I(inode)->ip_alloc_sem); - ret = ocfs2_data_lock(inode, 1); - if (ret) { - mlog_errno(ret); - goto out_fail; - } - ret = ocfs2_write_begin_nolock(mapping, pos, len, flags, pagep, fsdata, di_bh, NULL); if (ret) { mlog_errno(ret); - goto out_fail_data; + goto out_fail; } brelse(di_bh); return 0; -out_fail_data: - ocfs2_data_unlock(inode, 1); out_fail: up_write(&OCFS2_I(inode)->ip_alloc_sem); @@ -1908,7 +1869,6 @@ static int ocfs2_write_end(struct file *file, struct address_space *mapping, ret = ocfs2_write_end_nolock(mapping, pos, len, copied, page, fsdata); - ocfs2_data_unlock(inode, 1); up_write(&OCFS2_I(inode)->ip_alloc_sem); ocfs2_meta_unlock(inode, 1); diff --git a/fs/ocfs2/cluster/tcp_internal.h b/fs/ocfs2/cluster/tcp_internal.h index 79bd6665b3ca..b2e832aca567 100644 --- a/fs/ocfs2/cluster/tcp_internal.h +++ b/fs/ocfs2/cluster/tcp_internal.h @@ -38,6 +38,9 @@ * locking semantics of the file system using the protocol. It should * be somewhere else, I'm sure, but right now it isn't. * + * New in version 10: + * - Meta/data locks combined + * * New in version 9: * - All votes removed * @@ -63,7 +66,7 @@ * - full 64 bit i_size in the metadata lock lvbs * - introduction of "rw" lock and pushing meta/data locking down */ -#define O2NET_PROTOCOL_VERSION 9ULL +#define O2NET_PROTOCOL_VERSION 10ULL struct o2net_handshake { __be64 protocol_version; __be64 connector_id; diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index 7e36abea8f40..ecf58c6e2fa3 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -232,12 +232,6 @@ static struct ocfs2_lock_res_ops ocfs2_inode_meta_lops = { .flags = LOCK_TYPE_REQUIRES_REFRESH|LOCK_TYPE_USES_LVB, }; -static struct ocfs2_lock_res_ops ocfs2_inode_data_lops = { - .get_osb = ocfs2_get_inode_osb, - .downconvert_worker = ocfs2_data_convert_worker, - .flags = 0, -}; - static struct ocfs2_lock_res_ops ocfs2_super_lops = { .flags = LOCK_TYPE_REQUIRES_REFRESH, }; @@ -261,7 +255,6 @@ static struct ocfs2_lock_res_ops ocfs2_inode_open_lops = { static inline int ocfs2_is_inode_lock(struct ocfs2_lock_res *lockres) { return lockres->l_type == OCFS2_LOCK_TYPE_META || - lockres->l_type == OCFS2_LOCK_TYPE_DATA || lockres->l_type == OCFS2_LOCK_TYPE_RW || lockres->l_type == OCFS2_LOCK_TYPE_OPEN; } @@ -405,9 +398,6 @@ void ocfs2_inode_lock_res_init(struct ocfs2_lock_res *res, case OCFS2_LOCK_TYPE_META: ops = &ocfs2_inode_meta_lops; break; - case OCFS2_LOCK_TYPE_DATA: - ops = &ocfs2_inode_data_lops; - break; case OCFS2_LOCK_TYPE_OPEN: ops = &ocfs2_inode_open_lops; break; @@ -1154,12 +1144,6 @@ int ocfs2_create_new_inode_locks(struct inode *inode) goto bail; } - ret = ocfs2_create_new_lock(osb, &OCFS2_I(inode)->ip_data_lockres, 1, 1); - if (ret) { - mlog_errno(ret); - goto bail; - } - ret = ocfs2_create_new_lock(osb, &OCFS2_I(inode)->ip_open_lockres, 0, 0); if (ret) { mlog_errno(ret); @@ -1312,67 +1296,6 @@ out: mlog_exit_void(); } -int ocfs2_data_lock_full(struct inode *inode, - int write, - int arg_flags) -{ - int status = 0, level; - struct ocfs2_lock_res *lockres; - struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); - - BUG_ON(!inode); - - mlog_entry_void(); - - mlog(0, "inode %llu take %s DATA lock\n", - (unsigned long long)OCFS2_I(inode)->ip_blkno, - write ? "EXMODE" : "PRMODE"); - - /* We'll allow faking a readonly data lock for - * rodevices. */ - if (ocfs2_is_hard_readonly(OCFS2_SB(inode->i_sb))) { - if (write) { - status = -EROFS; - mlog_errno(status); - } - goto out; - } - - if (ocfs2_mount_local(osb)) - goto out; - - lockres = &OCFS2_I(inode)->ip_data_lockres; - - level = write ? LKM_EXMODE : LKM_PRMODE; - - status = ocfs2_cluster_lock(OCFS2_SB(inode->i_sb), lockres, level, - 0, arg_flags); - if (status < 0 && status != -EAGAIN) - mlog_errno(status); - -out: - mlog_exit(status); - return status; -} - -/* see ocfs2_meta_lock_with_page() */ -int ocfs2_data_lock_with_page(struct inode *inode, - int write, - struct page *page) -{ - int ret; - - ret = ocfs2_data_lock_full(inode, write, OCFS2_LOCK_NONBLOCK); - if (ret == -EAGAIN) { - unlock_page(page); - if (ocfs2_data_lock(inode, write) == 0) - ocfs2_data_unlock(inode, write); - ret = AOP_TRUNCATED_PAGE; - } - - return ret; -} - static void ocfs2_downconvert_on_unlock(struct ocfs2_super *osb, struct ocfs2_lock_res *lockres) { @@ -1404,26 +1327,6 @@ static void ocfs2_downconvert_on_unlock(struct ocfs2_super *osb, mlog_exit_void(); } -void ocfs2_data_unlock(struct inode *inode, - int write) -{ - int level = write ? LKM_EXMODE : LKM_PRMODE; - struct ocfs2_lock_res *lockres = &OCFS2_I(inode)->ip_data_lockres; - struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); - - mlog_entry_void(); - - mlog(0, "inode %llu drop %s DATA lock\n", - (unsigned long long)OCFS2_I(inode)->ip_blkno, - write ? "EXMODE" : "PRMODE"); - - if (!ocfs2_is_hard_readonly(OCFS2_SB(inode->i_sb)) && - !ocfs2_mount_local(osb)) - ocfs2_cluster_unlock(OCFS2_SB(inode->i_sb), lockres, level); - - mlog_exit_void(); -} - #define OCFS2_SEC_BITS 34 #define OCFS2_SEC_SHIFT (64 - 34) #define OCFS2_NSEC_MASK ((1ULL << OCFS2_SEC_SHIFT) - 1) @@ -2591,13 +2494,6 @@ int ocfs2_drop_inode_locks(struct inode *inode) status = err; - err = ocfs2_drop_lock(OCFS2_SB(inode->i_sb), - &OCFS2_I(inode)->ip_data_lockres); - if (err < 0) - mlog_errno(err); - if (err < 0 && !status) - status = err; - err = ocfs2_drop_lock(OCFS2_SB(inode->i_sb), &OCFS2_I(inode)->ip_meta_lockres); if (err < 0) diff --git a/fs/ocfs2/dlmglue.h b/fs/ocfs2/dlmglue.h index 931f6ee55146..3fd7729daeef 100644 --- a/fs/ocfs2/dlmglue.h +++ b/fs/ocfs2/dlmglue.h @@ -49,7 +49,7 @@ struct ocfs2_meta_lvb { __be32 lvb_reserved2; }; -/* ocfs2_meta_lock_full() and ocfs2_data_lock_full() 'arg_flags' flags */ +/* ocfs2_meta_lock_full() 'arg_flags' flags */ /* don't wait on recovery. */ #define OCFS2_META_LOCK_RECOVERY (0x01) /* Instruct the dlm not to queue ourselves on the other node. */ @@ -69,15 +69,6 @@ void ocfs2_dentry_lock_res_init(struct ocfs2_dentry_lock *dl, void ocfs2_lock_res_free(struct ocfs2_lock_res *res); int ocfs2_create_new_inode_locks(struct inode *inode); int ocfs2_drop_inode_locks(struct inode *inode); -int ocfs2_data_lock_full(struct inode *inode, - int write, - int arg_flags); -#define ocfs2_data_lock(inode, write) ocfs2_data_lock_full(inode, write, 0) -int ocfs2_data_lock_with_page(struct inode *inode, - int write, - struct page *page); -void ocfs2_data_unlock(struct inode *inode, - int write); int ocfs2_rw_lock(struct inode *inode, int write); void ocfs2_rw_unlock(struct inode *inode, int write); int ocfs2_open_lock(struct inode *inode); diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index b75b2e1f0e42..c5c183ac41fe 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -382,18 +382,13 @@ static int ocfs2_truncate_file(struct inode *inode, down_write(&OCFS2_I(inode)->ip_alloc_sem); - /* This forces other nodes to sync and drop their pages. Do - * this even if we have a truncate without allocation change - - * ocfs2 cluster sizes can be much greater than page size, so - * we have to truncate them anyway. */ - status = ocfs2_data_lock(inode, 1); - if (status < 0) { - up_write(&OCFS2_I(inode)->ip_alloc_sem); - - mlog_errno(status); - goto bail; - } - + /* + * The inode lock forced other nodes to sync and drop their + * pages, which (correctly) happens even if we have a truncate + * without allocation change - ocfs2 cluster sizes can be much + * greater than page size, so we have to truncate them + * anyway. + */ unmap_mapping_range(inode->i_mapping, new_i_size + PAGE_SIZE - 1, 0, 1); truncate_inode_pages(inode->i_mapping, new_i_size); @@ -403,7 +398,7 @@ static int ocfs2_truncate_file(struct inode *inode, if (status) mlog_errno(status); - goto bail_unlock_data; + goto bail_unlock_sem; } /* alright, we're going to need to do a full blown alloc size @@ -413,25 +408,23 @@ static int ocfs2_truncate_file(struct inode *inode, status = ocfs2_orphan_for_truncate(osb, inode, di_bh, new_i_size); if (status < 0) { mlog_errno(status); - goto bail_unlock_data; + goto bail_unlock_sem; } status = ocfs2_prepare_truncate(osb, inode, di_bh, &tc); if (status < 0) { mlog_errno(status); - goto bail_unlock_data; + goto bail_unlock_sem; } status = ocfs2_commit_truncate(osb, inode, di_bh, tc); if (status < 0) { mlog_errno(status); - goto bail_unlock_data; + goto bail_unlock_sem; } /* TODO: orphan dir cleanup here. */ -bail_unlock_data: - ocfs2_data_unlock(inode, 1); - +bail_unlock_sem: up_write(&OCFS2_I(inode)->ip_alloc_sem); bail: @@ -917,7 +910,7 @@ static int ocfs2_extend_file(struct inode *inode, struct buffer_head *di_bh, u64 new_i_size) { - int ret = 0, data_locked = 0; + int ret = 0; struct ocfs2_inode_info *oi = OCFS2_I(inode); BUG_ON(!di_bh); @@ -943,20 +936,6 @@ static int ocfs2_extend_file(struct inode *inode, && ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb))) goto out_update_size; - /* - * protect the pages that ocfs2_zero_extend is going to be - * pulling into the page cache.. we do this before the - * metadata extend so that we don't get into the situation - * where we've extended the metadata but can't get the data - * lock to zero. - */ - ret = ocfs2_data_lock(inode, 1); - if (ret < 0) { - mlog_errno(ret); - goto out; - } - data_locked = 1; - /* * The alloc sem blocks people in read/write from reading our * allocation until we're done changing it. We depend on @@ -980,7 +959,7 @@ static int ocfs2_extend_file(struct inode *inode, up_write(&oi->ip_alloc_sem); mlog_errno(ret); - goto out_unlock; + goto out; } } @@ -991,7 +970,7 @@ static int ocfs2_extend_file(struct inode *inode, if (ret < 0) { mlog_errno(ret); - goto out_unlock; + goto out; } out_update_size: @@ -999,10 +978,6 @@ out_update_size: if (ret < 0) mlog_errno(ret); -out_unlock: - if (data_locked) - ocfs2_data_unlock(inode, 1); - out: return ret; } diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c index 86cf073996b5..8ff201d3705e 100644 --- a/fs/ocfs2/inode.c +++ b/fs/ocfs2/inode.c @@ -332,10 +332,6 @@ int ocfs2_populate_inode(struct inode *inode, struct ocfs2_dinode *fe, OCFS2_LOCK_TYPE_RW, inode->i_generation, inode); - ocfs2_inode_lock_res_init(&OCFS2_I(inode)->ip_data_lockres, - OCFS2_LOCK_TYPE_DATA, inode->i_generation, - inode); - ocfs2_set_inode_flags(inode); status = 0; @@ -1014,7 +1010,6 @@ void ocfs2_clear_inode(struct inode *inode) * the downconvert thread while waiting to destroy the locks. */ ocfs2_mark_lockres_freeing(&oi->ip_rw_lockres); ocfs2_mark_lockres_freeing(&oi->ip_meta_lockres); - ocfs2_mark_lockres_freeing(&oi->ip_data_lockres); ocfs2_mark_lockres_freeing(&oi->ip_open_lockres); /* We very well may get a clear_inode before all an inodes @@ -1038,7 +1033,6 @@ void ocfs2_clear_inode(struct inode *inode) ocfs2_lock_res_free(&oi->ip_rw_lockres); ocfs2_lock_res_free(&oi->ip_meta_lockres); - ocfs2_lock_res_free(&oi->ip_data_lockres); ocfs2_lock_res_free(&oi->ip_open_lockres); ocfs2_metadata_cache_purge(inode); diff --git a/fs/ocfs2/inode.h b/fs/ocfs2/inode.h index 70e881c55536..d1c54da687c9 100644 --- a/fs/ocfs2/inode.h +++ b/fs/ocfs2/inode.h @@ -35,7 +35,6 @@ struct ocfs2_inode_info struct ocfs2_lock_res ip_rw_lockres; struct ocfs2_lock_res ip_meta_lockres; - struct ocfs2_lock_res ip_data_lockres; struct ocfs2_lock_res ip_open_lockres; /* protects allocation changes on this inode. */ diff --git a/fs/ocfs2/mmap.c b/fs/ocfs2/mmap.c index 98756156d298..a7f0ccc6fdd8 100644 --- a/fs/ocfs2/mmap.c +++ b/fs/ocfs2/mmap.c @@ -181,17 +181,8 @@ static int ocfs2_page_mkwrite(struct vm_area_struct *vma, struct page *page) */ down_write(&OCFS2_I(inode)->ip_alloc_sem); - ret = ocfs2_data_lock(inode, 1); - if (ret < 0) { - mlog_errno(ret); - goto out_meta_unlock; - } - ret = __ocfs2_page_mkwrite(inode, di_bh, page); - ocfs2_data_unlock(inode, 1); - -out_meta_unlock: up_write(&OCFS2_I(inode)->ip_alloc_sem); brelse(di_bh); diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index 1996820488cc..064eba074f1e 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -1020,7 +1020,6 @@ static void ocfs2_inode_init_once(struct kmem_cache *cachep, void *data) ocfs2_lock_res_init_once(&oi->ip_rw_lockres); ocfs2_lock_res_init_once(&oi->ip_meta_lockres); - ocfs2_lock_res_init_once(&oi->ip_data_lockres); ocfs2_lock_res_init_once(&oi->ip_open_lockres); ocfs2_metadata_cache_init(&oi->vfs_inode); -- cgit v1.2.3-59-g8ed1b From e63aecb651ba73dffc62f9608ee1b7ae2a0ffd4b Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Thu, 18 Oct 2007 15:30:42 -0700 Subject: ocfs2: Rename ocfs2_meta_[un]lock Call this the "inode_lock" now, since it covers both data and meta data. This patch makes no functional changes. Signed-off-by: Mark Fasheh --- fs/ocfs2/alloc.c | 8 ++++---- fs/ocfs2/aops.c | 18 ++++++++--------- fs/ocfs2/dir.c | 8 ++++---- fs/ocfs2/dlmglue.c | 50 +++++++++++++++++++++++------------------------ fs/ocfs2/dlmglue.h | 12 ++++++------ fs/ocfs2/export.c | 4 ++-- fs/ocfs2/file.c | 42 +++++++++++++++++++-------------------- fs/ocfs2/inode.c | 30 ++++++++++++++-------------- fs/ocfs2/inode.h | 2 +- fs/ocfs2/ioctl.c | 8 ++++---- fs/ocfs2/journal.c | 26 ++++++++++++------------- fs/ocfs2/localalloc.c | 8 ++++---- fs/ocfs2/mmap.c | 8 ++++---- fs/ocfs2/namei.c | 54 +++++++++++++++++++++++++-------------------------- fs/ocfs2/suballoc.c | 4 ++-- fs/ocfs2/super.c | 6 +++--- 16 files changed, 144 insertions(+), 144 deletions(-) diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c index 23c8cda43f19..e6df06ac6405 100644 --- a/fs/ocfs2/alloc.c +++ b/fs/ocfs2/alloc.c @@ -4731,7 +4731,7 @@ int __ocfs2_flush_truncate_log(struct ocfs2_super *osb) mutex_lock(&data_alloc_inode->i_mutex); - status = ocfs2_meta_lock(data_alloc_inode, &data_alloc_bh, 1); + status = ocfs2_inode_lock(data_alloc_inode, &data_alloc_bh, 1); if (status < 0) { mlog_errno(status); goto out_mutex; @@ -4753,7 +4753,7 @@ int __ocfs2_flush_truncate_log(struct ocfs2_super *osb) out_unlock: brelse(data_alloc_bh); - ocfs2_meta_unlock(data_alloc_inode, 1); + ocfs2_inode_unlock(data_alloc_inode, 1); out_mutex: mutex_unlock(&data_alloc_inode->i_mutex); @@ -5077,7 +5077,7 @@ static int ocfs2_free_cached_items(struct ocfs2_super *osb, mutex_lock(&inode->i_mutex); - ret = ocfs2_meta_lock(inode, &di_bh, 1); + ret = ocfs2_inode_lock(inode, &di_bh, 1); if (ret) { mlog_errno(ret); goto out_mutex; @@ -5118,7 +5118,7 @@ out_journal: ocfs2_commit_trans(osb, handle); out_unlock: - ocfs2_meta_unlock(inode, 1); + ocfs2_inode_unlock(inode, 1); brelse(di_bh); out_mutex: mutex_unlock(&inode->i_mutex); diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c index 5fc27cfaee50..ac8c39055717 100644 --- a/fs/ocfs2/aops.c +++ b/fs/ocfs2/aops.c @@ -275,7 +275,7 @@ static int ocfs2_readpage(struct file *file, struct page *page) mlog_entry("(0x%p, %lu)\n", file, (page ? page->index : 0)); - ret = ocfs2_meta_lock_with_page(inode, NULL, 0, page); + ret = ocfs2_inode_lock_with_page(inode, NULL, 0, page); if (ret != 0) { if (ret == AOP_TRUNCATED_PAGE) unlock = 0; @@ -285,7 +285,7 @@ static int ocfs2_readpage(struct file *file, struct page *page) if (down_read_trylock(&oi->ip_alloc_sem) == 0) { ret = AOP_TRUNCATED_PAGE; - goto out_meta_unlock; + goto out_inode_unlock; } /* @@ -313,8 +313,8 @@ static int ocfs2_readpage(struct file *file, struct page *page) out_alloc: up_read(&OCFS2_I(inode)->ip_alloc_sem); -out_meta_unlock: - ocfs2_meta_unlock(inode, 0); +out_inode_unlock: + ocfs2_inode_unlock(inode, 0); out: if (unlock) unlock_page(page); @@ -443,7 +443,7 @@ static sector_t ocfs2_bmap(struct address_space *mapping, sector_t block) * accessed concurrently from multiple nodes. */ if (!INODE_JOURNAL(inode)) { - err = ocfs2_meta_lock(inode, NULL, 0); + err = ocfs2_inode_lock(inode, NULL, 0); if (err) { if (err != -ENOENT) mlog_errno(err); @@ -458,7 +458,7 @@ static sector_t ocfs2_bmap(struct address_space *mapping, sector_t block) if (!INODE_JOURNAL(inode)) { up_read(&OCFS2_I(inode)->ip_alloc_sem); - ocfs2_meta_unlock(inode, 0); + ocfs2_inode_unlock(inode, 0); } if (err) { @@ -1723,7 +1723,7 @@ static int ocfs2_write_begin(struct file *file, struct address_space *mapping, struct buffer_head *di_bh = NULL; struct inode *inode = mapping->host; - ret = ocfs2_meta_lock(inode, &di_bh, 1); + ret = ocfs2_inode_lock(inode, &di_bh, 1); if (ret) { mlog_errno(ret); return ret; @@ -1753,7 +1753,7 @@ out_fail: up_write(&OCFS2_I(inode)->ip_alloc_sem); brelse(di_bh); - ocfs2_meta_unlock(inode, 1); + ocfs2_inode_unlock(inode, 1); return ret; } @@ -1870,7 +1870,7 @@ static int ocfs2_write_end(struct file *file, struct address_space *mapping, ret = ocfs2_write_end_nolock(mapping, pos, len, copied, page, fsdata); up_write(&OCFS2_I(inode)->ip_alloc_sem); - ocfs2_meta_unlock(inode, 1); + ocfs2_inode_unlock(inode, 1); return ret; } diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c index 63b28fdceb4a..6b0107f21344 100644 --- a/fs/ocfs2/dir.c +++ b/fs/ocfs2/dir.c @@ -846,14 +846,14 @@ int ocfs2_readdir(struct file * filp, void * dirent, filldir_t filldir) mlog_entry("dirino=%llu\n", (unsigned long long)OCFS2_I(inode)->ip_blkno); - error = ocfs2_meta_lock_atime(inode, filp->f_vfsmnt, &lock_level); + error = ocfs2_inode_lock_atime(inode, filp->f_vfsmnt, &lock_level); if (lock_level && error >= 0) { /* We release EX lock which used to update atime * and get PR lock again to reduce contention * on commonly accessed directories. */ - ocfs2_meta_unlock(inode, 1); + ocfs2_inode_unlock(inode, 1); lock_level = 0; - error = ocfs2_meta_lock(inode, NULL, 0); + error = ocfs2_inode_lock(inode, NULL, 0); } if (error < 0) { if (error != -ENOENT) @@ -865,7 +865,7 @@ int ocfs2_readdir(struct file * filp, void * dirent, filldir_t filldir) error = ocfs2_dir_foreach_blk(inode, &filp->f_version, &filp->f_pos, dirent, filldir, NULL); - ocfs2_meta_unlock(inode, lock_level); + ocfs2_inode_unlock(inode, lock_level); bail_nolock: mlog_exit(error); diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index ecf58c6e2fa3..fa5e3bdc295d 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -224,7 +224,7 @@ static struct ocfs2_lock_res_ops ocfs2_inode_rw_lops = { .flags = 0, }; -static struct ocfs2_lock_res_ops ocfs2_inode_meta_lops = { +static struct ocfs2_lock_res_ops ocfs2_inode_inode_lops = { .get_osb = ocfs2_get_inode_osb, .check_downconvert = ocfs2_check_meta_downconvert, .set_lvb = ocfs2_set_meta_lvb, @@ -306,7 +306,7 @@ static inline void ocfs2_recover_from_dlm_error(struct ocfs2_lock_res *lockres, static int ocfs2_downconvert_thread(void *arg); static void ocfs2_downconvert_on_unlock(struct ocfs2_super *osb, struct ocfs2_lock_res *lockres); -static int ocfs2_meta_lock_update(struct inode *inode, +static int ocfs2_inode_lock_update(struct inode *inode, struct buffer_head **bh); static void ocfs2_drop_osb_locks(struct ocfs2_super *osb); static inline int ocfs2_highest_compat_lock_level(int level); @@ -396,7 +396,7 @@ void ocfs2_inode_lock_res_init(struct ocfs2_lock_res *res, ops = &ocfs2_inode_rw_lops; break; case OCFS2_LOCK_TYPE_META: - ops = &ocfs2_inode_meta_lops; + ops = &ocfs2_inode_inode_lops; break; case OCFS2_LOCK_TYPE_OPEN: ops = &ocfs2_inode_open_lops; @@ -1138,7 +1138,7 @@ int ocfs2_create_new_inode_locks(struct inode *inode) * We don't want to use LKM_LOCAL on a meta data lock as they * don't use a generation in their lock names. */ - ret = ocfs2_create_new_lock(osb, &OCFS2_I(inode)->ip_meta_lockres, 1, 0); + ret = ocfs2_create_new_lock(osb, &OCFS2_I(inode)->ip_inode_lockres, 1, 0); if (ret) { mlog_errno(ret); goto bail; @@ -1346,11 +1346,11 @@ static u64 ocfs2_pack_timespec(struct timespec *spec) /* Call this with the lockres locked. I am reasonably sure we don't * need ip_lock in this function as anyone who would be changing those - * values is supposed to be blocked in ocfs2_meta_lock right now. */ + * values is supposed to be blocked in ocfs2_inode_lock right now. */ static void __ocfs2_stuff_meta_lvb(struct inode *inode) { struct ocfs2_inode_info *oi = OCFS2_I(inode); - struct ocfs2_lock_res *lockres = &oi->ip_meta_lockres; + struct ocfs2_lock_res *lockres = &oi->ip_inode_lockres; struct ocfs2_meta_lvb *lvb; mlog_entry_void(); @@ -1400,7 +1400,7 @@ static void ocfs2_unpack_timespec(struct timespec *spec, static void ocfs2_refresh_inode_from_lvb(struct inode *inode) { struct ocfs2_inode_info *oi = OCFS2_I(inode); - struct ocfs2_lock_res *lockres = &oi->ip_meta_lockres; + struct ocfs2_lock_res *lockres = &oi->ip_inode_lockres; struct ocfs2_meta_lvb *lvb; mlog_entry_void(); @@ -1508,12 +1508,12 @@ static inline void ocfs2_complete_lock_res_refresh(struct ocfs2_lock_res *lockre } /* may or may not return a bh if it went to disk. */ -static int ocfs2_meta_lock_update(struct inode *inode, +static int ocfs2_inode_lock_update(struct inode *inode, struct buffer_head **bh) { int status = 0; struct ocfs2_inode_info *oi = OCFS2_I(inode); - struct ocfs2_lock_res *lockres = &oi->ip_meta_lockres; + struct ocfs2_lock_res *lockres = &oi->ip_inode_lockres; struct ocfs2_dinode *fe; struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); @@ -1625,7 +1625,7 @@ static int ocfs2_assign_bh(struct inode *inode, * returns < 0 error if the callback will never be called, otherwise * the result of the lock will be communicated via the callback. */ -int ocfs2_meta_lock_full(struct inode *inode, +int ocfs2_inode_lock_full(struct inode *inode, struct buffer_head **ret_bh, int ex, int arg_flags) @@ -1660,7 +1660,7 @@ int ocfs2_meta_lock_full(struct inode *inode, wait_event(osb->recovery_event, ocfs2_node_map_is_empty(osb, &osb->recovery_map)); - lockres = &OCFS2_I(inode)->ip_meta_lockres; + lockres = &OCFS2_I(inode)->ip_inode_lockres; level = ex ? LKM_EXMODE : LKM_PRMODE; dlm_flags = 0; if (arg_flags & OCFS2_META_LOCK_NOQUEUE) @@ -1699,11 +1699,11 @@ local: } /* This is fun. The caller may want a bh back, or it may - * not. ocfs2_meta_lock_update definitely wants one in, but + * not. ocfs2_inode_lock_update definitely wants one in, but * may or may not read one, depending on what's in the * LVB. The result of all of this is that we've *only* gone to * disk if we have to, so the complexity is worthwhile. */ - status = ocfs2_meta_lock_update(inode, &local_bh); + status = ocfs2_inode_lock_update(inode, &local_bh); if (status < 0) { if (status != -ENOENT) mlog_errno(status); @@ -1725,7 +1725,7 @@ bail: *ret_bh = NULL; } if (acquired) - ocfs2_meta_unlock(inode, ex); + ocfs2_inode_unlock(inode, ex); } if (local_bh) @@ -1757,32 +1757,32 @@ bail: * ping locks back and forth, but that's a risk we're willing to take to avoid * the lock inversion simply. */ -int ocfs2_meta_lock_with_page(struct inode *inode, +int ocfs2_inode_lock_with_page(struct inode *inode, struct buffer_head **ret_bh, int ex, struct page *page) { int ret; - ret = ocfs2_meta_lock_full(inode, ret_bh, ex, OCFS2_LOCK_NONBLOCK); + ret = ocfs2_inode_lock_full(inode, ret_bh, ex, OCFS2_LOCK_NONBLOCK); if (ret == -EAGAIN) { unlock_page(page); - if (ocfs2_meta_lock(inode, ret_bh, ex) == 0) - ocfs2_meta_unlock(inode, ex); + if (ocfs2_inode_lock(inode, ret_bh, ex) == 0) + ocfs2_inode_unlock(inode, ex); ret = AOP_TRUNCATED_PAGE; } return ret; } -int ocfs2_meta_lock_atime(struct inode *inode, +int ocfs2_inode_lock_atime(struct inode *inode, struct vfsmount *vfsmnt, int *level) { int ret; mlog_entry_void(); - ret = ocfs2_meta_lock(inode, NULL, 0); + ret = ocfs2_inode_lock(inode, NULL, 0); if (ret < 0) { mlog_errno(ret); return ret; @@ -1795,8 +1795,8 @@ int ocfs2_meta_lock_atime(struct inode *inode, if (ocfs2_should_update_atime(inode, vfsmnt)) { struct buffer_head *bh = NULL; - ocfs2_meta_unlock(inode, 0); - ret = ocfs2_meta_lock(inode, &bh, 1); + ocfs2_inode_unlock(inode, 0); + ret = ocfs2_inode_lock(inode, &bh, 1); if (ret < 0) { mlog_errno(ret); return ret; @@ -1813,11 +1813,11 @@ int ocfs2_meta_lock_atime(struct inode *inode, return ret; } -void ocfs2_meta_unlock(struct inode *inode, +void ocfs2_inode_unlock(struct inode *inode, int ex) { int level = ex ? LKM_EXMODE : LKM_PRMODE; - struct ocfs2_lock_res *lockres = &OCFS2_I(inode)->ip_meta_lockres; + struct ocfs2_lock_res *lockres = &OCFS2_I(inode)->ip_inode_lockres; struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); mlog_entry_void(); @@ -2495,7 +2495,7 @@ int ocfs2_drop_inode_locks(struct inode *inode) status = err; err = ocfs2_drop_lock(OCFS2_SB(inode->i_sb), - &OCFS2_I(inode)->ip_meta_lockres); + &OCFS2_I(inode)->ip_inode_lockres); if (err < 0) mlog_errno(err); if (err < 0 && !status) diff --git a/fs/ocfs2/dlmglue.h b/fs/ocfs2/dlmglue.h index 3fd7729daeef..6dcbc944e8ce 100644 --- a/fs/ocfs2/dlmglue.h +++ b/fs/ocfs2/dlmglue.h @@ -49,7 +49,7 @@ struct ocfs2_meta_lvb { __be32 lvb_reserved2; }; -/* ocfs2_meta_lock_full() 'arg_flags' flags */ +/* ocfs2_inode_lock_full() 'arg_flags' flags */ /* don't wait on recovery. */ #define OCFS2_META_LOCK_RECOVERY (0x01) /* Instruct the dlm not to queue ourselves on the other node. */ @@ -74,21 +74,21 @@ void ocfs2_rw_unlock(struct inode *inode, int write); int ocfs2_open_lock(struct inode *inode); int ocfs2_try_open_lock(struct inode *inode, int write); void ocfs2_open_unlock(struct inode *inode); -int ocfs2_meta_lock_atime(struct inode *inode, +int ocfs2_inode_lock_atime(struct inode *inode, struct vfsmount *vfsmnt, int *level); -int ocfs2_meta_lock_full(struct inode *inode, +int ocfs2_inode_lock_full(struct inode *inode, struct buffer_head **ret_bh, int ex, int arg_flags); -int ocfs2_meta_lock_with_page(struct inode *inode, +int ocfs2_inode_lock_with_page(struct inode *inode, struct buffer_head **ret_bh, int ex, struct page *page); /* 99% of the time we don't want to supply any additional flags -- * those are for very specific cases only. */ -#define ocfs2_meta_lock(i, b, e) ocfs2_meta_lock_full(i, b, e, 0) -void ocfs2_meta_unlock(struct inode *inode, +#define ocfs2_inode_lock(i, b, e) ocfs2_inode_lock_full(i, b, e, 0) +void ocfs2_inode_unlock(struct inode *inode, int ex); int ocfs2_super_lock(struct ocfs2_super *osb, int ex); diff --git a/fs/ocfs2/export.c b/fs/ocfs2/export.c index 535bfa9568a4..1f9e353cac45 100644 --- a/fs/ocfs2/export.c +++ b/fs/ocfs2/export.c @@ -95,7 +95,7 @@ static struct dentry *ocfs2_get_parent(struct dentry *child) mlog(0, "find parent of directory %llu\n", (unsigned long long)OCFS2_I(dir)->ip_blkno); - status = ocfs2_meta_lock(dir, NULL, 0); + status = ocfs2_inode_lock(dir, NULL, 0); if (status < 0) { if (status != -ENOENT) mlog_errno(status); @@ -126,7 +126,7 @@ static struct dentry *ocfs2_get_parent(struct dentry *child) parent->d_op = &ocfs2_dentry_ops; bail_unlock: - ocfs2_meta_unlock(dir, 0); + ocfs2_inode_unlock(dir, 0); bail: mlog_exit_ptr(parent); diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index c5c183ac41fe..432e5f3c4784 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -1025,7 +1025,7 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr) } } - status = ocfs2_meta_lock(inode, &bh, 1); + status = ocfs2_inode_lock(inode, &bh, 1); if (status < 0) { if (status != -ENOENT) mlog_errno(status); @@ -1077,7 +1077,7 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr) bail_commit: ocfs2_commit_trans(osb, handle); bail_unlock: - ocfs2_meta_unlock(inode, 1); + ocfs2_inode_unlock(inode, 1); bail_unlock_rw: if (size_change) ocfs2_rw_unlock(inode, 1); @@ -1124,7 +1124,7 @@ int ocfs2_permission(struct inode *inode, int mask, struct nameidata *nd) mlog_entry_void(); - ret = ocfs2_meta_lock(inode, NULL, 0); + ret = ocfs2_inode_lock(inode, NULL, 0); if (ret) { if (ret != -ENOENT) mlog_errno(ret); @@ -1133,7 +1133,7 @@ int ocfs2_permission(struct inode *inode, int mask, struct nameidata *nd) ret = generic_permission(inode, mask, NULL); - ocfs2_meta_unlock(inode, 0); + ocfs2_inode_unlock(inode, 0); out: mlog_exit(ret); return ret; @@ -1605,7 +1605,7 @@ static int __ocfs2_change_file_space(struct file *file, struct inode *inode, goto out; } - ret = ocfs2_meta_lock(inode, &di_bh, 1); + ret = ocfs2_inode_lock(inode, &di_bh, 1); if (ret) { mlog_errno(ret); goto out_rw_unlock; @@ -1613,7 +1613,7 @@ static int __ocfs2_change_file_space(struct file *file, struct inode *inode, if (inode->i_flags & (S_IMMUTABLE|S_APPEND)) { ret = -EPERM; - goto out_meta_unlock; + goto out_inode_unlock; } switch (sr->l_whence) { @@ -1627,7 +1627,7 @@ static int __ocfs2_change_file_space(struct file *file, struct inode *inode, break; default: ret = -EINVAL; - goto out_meta_unlock; + goto out_inode_unlock; } sr->l_whence = 0; @@ -1638,14 +1638,14 @@ static int __ocfs2_change_file_space(struct file *file, struct inode *inode, || (sr->l_start + llen) < 0 || (sr->l_start + llen) > max_off) { ret = -EINVAL; - goto out_meta_unlock; + goto out_inode_unlock; } size = sr->l_start + sr->l_len; if (cmd == OCFS2_IOC_RESVSP || cmd == OCFS2_IOC_RESVSP64) { if (sr->l_len <= 0) { ret = -EINVAL; - goto out_meta_unlock; + goto out_inode_unlock; } } @@ -1653,7 +1653,7 @@ static int __ocfs2_change_file_space(struct file *file, struct inode *inode, ret = __ocfs2_write_remove_suid(inode, di_bh); if (ret) { mlog_errno(ret); - goto out_meta_unlock; + goto out_inode_unlock; } } @@ -1679,7 +1679,7 @@ static int __ocfs2_change_file_space(struct file *file, struct inode *inode, up_write(&OCFS2_I(inode)->ip_alloc_sem); if (ret) { mlog_errno(ret); - goto out_meta_unlock; + goto out_inode_unlock; } /* @@ -1689,7 +1689,7 @@ static int __ocfs2_change_file_space(struct file *file, struct inode *inode, if (IS_ERR(handle)) { ret = PTR_ERR(handle); mlog_errno(ret); - goto out_meta_unlock; + goto out_inode_unlock; } if (change_size && i_size_read(inode) < size) @@ -1702,9 +1702,9 @@ static int __ocfs2_change_file_space(struct file *file, struct inode *inode, ocfs2_commit_trans(osb, handle); -out_meta_unlock: +out_inode_unlock: brelse(di_bh); - ocfs2_meta_unlock(inode, 1); + ocfs2_inode_unlock(inode, 1); out_rw_unlock: ocfs2_rw_unlock(inode, 1); @@ -1774,7 +1774,7 @@ static int ocfs2_prepare_inode_for_write(struct dentry *dentry, * if we need to make modifications here. */ for(;;) { - ret = ocfs2_meta_lock(inode, NULL, meta_level); + ret = ocfs2_inode_lock(inode, NULL, meta_level); if (ret < 0) { meta_level = -1; mlog_errno(ret); @@ -1792,7 +1792,7 @@ static int ocfs2_prepare_inode_for_write(struct dentry *dentry, * set inode->i_size at the end of a write. */ if (should_remove_suid(dentry)) { if (meta_level == 0) { - ocfs2_meta_unlock(inode, meta_level); + ocfs2_inode_unlock(inode, meta_level); meta_level = 1; continue; } @@ -1861,7 +1861,7 @@ static int ocfs2_prepare_inode_for_write(struct dentry *dentry, *ppos = saved_pos; out_unlock: - ocfs2_meta_unlock(inode, meta_level); + ocfs2_inode_unlock(inode, meta_level); out: return ret; @@ -2074,12 +2074,12 @@ static ssize_t ocfs2_file_splice_read(struct file *in, /* * See the comment in ocfs2_file_aio_read() */ - ret = ocfs2_meta_lock(inode, NULL, 0); + ret = ocfs2_inode_lock(inode, NULL, 0); if (ret < 0) { mlog_errno(ret); goto bail; } - ocfs2_meta_unlock(inode, 0); + ocfs2_inode_unlock(inode, 0); ret = generic_file_splice_read(in, ppos, pipe, len, flags); @@ -2135,12 +2135,12 @@ static ssize_t ocfs2_file_aio_read(struct kiocb *iocb, * like i_size. This allows the checks down below * generic_file_aio_read() a chance of actually working. */ - ret = ocfs2_meta_lock_atime(inode, filp->f_vfsmnt, &lock_level); + ret = ocfs2_inode_lock_atime(inode, filp->f_vfsmnt, &lock_level); if (ret < 0) { mlog_errno(ret); goto bail; } - ocfs2_meta_unlock(inode, lock_level); + ocfs2_inode_unlock(inode, lock_level); ret = generic_file_aio_read(iocb, iov, nr_segs, iocb->ki_pos); if (ret == -EINVAL) diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c index 8ff201d3705e..00cd5b7f3e52 100644 --- a/fs/ocfs2/inode.c +++ b/fs/ocfs2/inode.c @@ -321,7 +321,7 @@ int ocfs2_populate_inode(struct inode *inode, struct ocfs2_dinode *fe, */ BUG_ON(le32_to_cpu(fe->i_flags) & OCFS2_SYSTEM_FL); - ocfs2_inode_lock_res_init(&OCFS2_I(inode)->ip_meta_lockres, + ocfs2_inode_lock_res_init(&OCFS2_I(inode)->ip_inode_lockres, OCFS2_LOCK_TYPE_META, 0, inode); ocfs2_inode_lock_res_init(&OCFS2_I(inode)->ip_open_lockres, @@ -409,7 +409,7 @@ static int ocfs2_read_locked_inode(struct inode *inode, if (args->fi_flags & OCFS2_FI_FLAG_SYSFILE) generation = osb->fs_generation; - ocfs2_inode_lock_res_init(&OCFS2_I(inode)->ip_meta_lockres, + ocfs2_inode_lock_res_init(&OCFS2_I(inode)->ip_inode_lockres, OCFS2_LOCK_TYPE_META, generation, inode); @@ -424,7 +424,7 @@ static int ocfs2_read_locked_inode(struct inode *inode, mlog_errno(status); return status; } - status = ocfs2_meta_lock(inode, NULL, 0); + status = ocfs2_inode_lock(inode, NULL, 0); if (status) { make_bad_inode(inode); mlog_errno(status); @@ -479,7 +479,7 @@ static int ocfs2_read_locked_inode(struct inode *inode, bail: if (can_lock) - ocfs2_meta_unlock(inode, 0); + ocfs2_inode_unlock(inode, 0); if (status < 0) make_bad_inode(inode); @@ -581,7 +581,7 @@ static int ocfs2_remove_inode(struct inode *inode, } mutex_lock(&inode_alloc_inode->i_mutex); - status = ocfs2_meta_lock(inode_alloc_inode, &inode_alloc_bh, 1); + status = ocfs2_inode_lock(inode_alloc_inode, &inode_alloc_bh, 1); if (status < 0) { mutex_unlock(&inode_alloc_inode->i_mutex); @@ -630,7 +630,7 @@ static int ocfs2_remove_inode(struct inode *inode, bail_commit: ocfs2_commit_trans(osb, handle); bail_unlock: - ocfs2_meta_unlock(inode_alloc_inode, 1); + ocfs2_inode_unlock(inode_alloc_inode, 1); mutex_unlock(&inode_alloc_inode->i_mutex); brelse(inode_alloc_bh); bail: @@ -704,7 +704,7 @@ static int ocfs2_wipe_inode(struct inode *inode, * delete_inode operation. We do this now to avoid races with * recovery completion on other nodes. */ mutex_lock(&orphan_dir_inode->i_mutex); - status = ocfs2_meta_lock(orphan_dir_inode, &orphan_dir_bh, 1); + status = ocfs2_inode_lock(orphan_dir_inode, &orphan_dir_bh, 1); if (status < 0) { mutex_unlock(&orphan_dir_inode->i_mutex); @@ -728,7 +728,7 @@ static int ocfs2_wipe_inode(struct inode *inode, mlog_errno(status); bail_unlock_dir: - ocfs2_meta_unlock(orphan_dir_inode, 1); + ocfs2_inode_unlock(orphan_dir_inode, 1); mutex_unlock(&orphan_dir_inode->i_mutex); brelse(orphan_dir_bh); bail: @@ -929,7 +929,7 @@ void ocfs2_delete_inode(struct inode *inode) * allocation lock here as it won't be needed - nobody will * have the file open. */ - status = ocfs2_meta_lock(inode, &di_bh, 1); + status = ocfs2_inode_lock(inode, &di_bh, 1); if (status < 0) { if (status != -ENOENT) mlog_errno(status); @@ -975,7 +975,7 @@ void ocfs2_delete_inode(struct inode *inode) OCFS2_I(inode)->ip_flags |= OCFS2_INODE_DELETED; bail_unlock_inode: - ocfs2_meta_unlock(inode, 1); + ocfs2_inode_unlock(inode, 1); brelse(di_bh); bail_unblock: status = sigprocmask(SIG_SETMASK, &oldset, NULL); @@ -1009,7 +1009,7 @@ void ocfs2_clear_inode(struct inode *inode) /* Do these before all the other work so that we don't bounce * the downconvert thread while waiting to destroy the locks. */ ocfs2_mark_lockres_freeing(&oi->ip_rw_lockres); - ocfs2_mark_lockres_freeing(&oi->ip_meta_lockres); + ocfs2_mark_lockres_freeing(&oi->ip_inode_lockres); ocfs2_mark_lockres_freeing(&oi->ip_open_lockres); /* We very well may get a clear_inode before all an inodes @@ -1032,7 +1032,7 @@ void ocfs2_clear_inode(struct inode *inode) mlog_errno(status); ocfs2_lock_res_free(&oi->ip_rw_lockres); - ocfs2_lock_res_free(&oi->ip_meta_lockres); + ocfs2_lock_res_free(&oi->ip_inode_lockres); ocfs2_lock_res_free(&oi->ip_open_lockres); ocfs2_metadata_cache_purge(inode); @@ -1176,15 +1176,15 @@ int ocfs2_inode_revalidate(struct dentry *dentry) } spin_unlock(&OCFS2_I(inode)->ip_lock); - /* Let ocfs2_meta_lock do the work of updating our struct + /* Let ocfs2_inode_lock do the work of updating our struct * inode for us. */ - status = ocfs2_meta_lock(inode, NULL, 0); + status = ocfs2_inode_lock(inode, NULL, 0); if (status < 0) { if (status != -ENOENT) mlog_errno(status); goto bail; } - ocfs2_meta_unlock(inode, 0); + ocfs2_inode_unlock(inode, 0); bail: mlog_exit(status); diff --git a/fs/ocfs2/inode.h b/fs/ocfs2/inode.h index d1c54da687c9..a61c044eb7da 100644 --- a/fs/ocfs2/inode.h +++ b/fs/ocfs2/inode.h @@ -34,7 +34,7 @@ struct ocfs2_inode_info u64 ip_blkno; struct ocfs2_lock_res ip_rw_lockres; - struct ocfs2_lock_res ip_meta_lockres; + struct ocfs2_lock_res ip_inode_lockres; struct ocfs2_lock_res ip_open_lockres; /* protects allocation changes on this inode. */ diff --git a/fs/ocfs2/ioctl.c b/fs/ocfs2/ioctl.c index 87dcece7e1b5..67c2fb4bae91 100644 --- a/fs/ocfs2/ioctl.c +++ b/fs/ocfs2/ioctl.c @@ -27,14 +27,14 @@ static int ocfs2_get_inode_attr(struct inode *inode, unsigned *flags) { int status; - status = ocfs2_meta_lock(inode, NULL, 0); + status = ocfs2_inode_lock(inode, NULL, 0); if (status < 0) { mlog_errno(status); return status; } ocfs2_get_inode_flags(OCFS2_I(inode)); *flags = OCFS2_I(inode)->ip_attr; - ocfs2_meta_unlock(inode, 0); + ocfs2_inode_unlock(inode, 0); mlog_exit(status); return status; @@ -52,7 +52,7 @@ static int ocfs2_set_inode_attr(struct inode *inode, unsigned flags, mutex_lock(&inode->i_mutex); - status = ocfs2_meta_lock(inode, &bh, 1); + status = ocfs2_inode_lock(inode, &bh, 1); if (status < 0) { mlog_errno(status); goto bail; @@ -100,7 +100,7 @@ static int ocfs2_set_inode_attr(struct inode *inode, unsigned flags, ocfs2_commit_trans(osb, handle); bail_unlock: - ocfs2_meta_unlock(inode, 1); + ocfs2_inode_unlock(inode, 1); bail: mutex_unlock(&inode->i_mutex); diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c index f2ebe2eb3c21..4f440a88bf53 100644 --- a/fs/ocfs2/journal.c +++ b/fs/ocfs2/journal.c @@ -336,7 +336,7 @@ int ocfs2_journal_init(struct ocfs2_journal *journal, int *dirty) struct ocfs2_dinode *di = NULL; struct buffer_head *bh = NULL; struct ocfs2_super *osb; - int meta_lock = 0; + int inode_lock = 0; mlog_entry_void(); @@ -366,14 +366,14 @@ int ocfs2_journal_init(struct ocfs2_journal *journal, int *dirty) /* Skip recovery waits here - journal inode metadata never * changes in a live cluster so it can be considered an * exception to the rule. */ - status = ocfs2_meta_lock_full(inode, &bh, 1, OCFS2_META_LOCK_RECOVERY); + status = ocfs2_inode_lock_full(inode, &bh, 1, OCFS2_META_LOCK_RECOVERY); if (status < 0) { if (status != -ERESTARTSYS) mlog(ML_ERROR, "Could not get lock on journal!\n"); goto done; } - meta_lock = 1; + inode_lock = 1; di = (struct ocfs2_dinode *)bh->b_data; if (inode->i_size < OCFS2_MIN_JOURNAL_SIZE) { @@ -413,8 +413,8 @@ int ocfs2_journal_init(struct ocfs2_journal *journal, int *dirty) status = 0; done: if (status < 0) { - if (meta_lock) - ocfs2_meta_unlock(inode, 1); + if (inode_lock) + ocfs2_inode_unlock(inode, 1); if (bh != NULL) brelse(bh); if (inode) { @@ -543,7 +543,7 @@ void ocfs2_journal_shutdown(struct ocfs2_super *osb) OCFS2_I(inode)->ip_open_count--; /* unlock our journal */ - ocfs2_meta_unlock(inode, 1); + ocfs2_inode_unlock(inode, 1); brelse(journal->j_bh); journal->j_bh = NULL; @@ -972,9 +972,9 @@ static int ocfs2_replay_journal(struct ocfs2_super *osb, } SET_INODE_JOURNAL(inode); - status = ocfs2_meta_lock_full(inode, &bh, 1, OCFS2_META_LOCK_RECOVERY); + status = ocfs2_inode_lock_full(inode, &bh, 1, OCFS2_META_LOCK_RECOVERY); if (status < 0) { - mlog(0, "status returned from ocfs2_meta_lock=%d\n", status); + mlog(0, "status returned from ocfs2_inode_lock=%d\n", status); if (status != -ERESTARTSYS) mlog(ML_ERROR, "Could not lock journal!\n"); goto done; @@ -1046,7 +1046,7 @@ static int ocfs2_replay_journal(struct ocfs2_super *osb, done: /* drop the lock on this nodes journal */ if (got_lock) - ocfs2_meta_unlock(inode, 1); + ocfs2_inode_unlock(inode, 1); if (inode) iput(inode); @@ -1161,14 +1161,14 @@ static int ocfs2_trylock_journal(struct ocfs2_super *osb, SET_INODE_JOURNAL(inode); flags = OCFS2_META_LOCK_RECOVERY | OCFS2_META_LOCK_NOQUEUE; - status = ocfs2_meta_lock_full(inode, NULL, 1, flags); + status = ocfs2_inode_lock_full(inode, NULL, 1, flags); if (status < 0) { if (status != -EAGAIN) mlog_errno(status); goto bail; } - ocfs2_meta_unlock(inode, 1); + ocfs2_inode_unlock(inode, 1); bail: if (inode) iput(inode); @@ -1276,7 +1276,7 @@ static int ocfs2_queue_orphans(struct ocfs2_super *osb, } mutex_lock(&orphan_dir_inode->i_mutex); - status = ocfs2_meta_lock(orphan_dir_inode, NULL, 0); + status = ocfs2_inode_lock(orphan_dir_inode, NULL, 0); if (status < 0) { mlog_errno(status); goto out; @@ -1292,7 +1292,7 @@ static int ocfs2_queue_orphans(struct ocfs2_super *osb, *head = priv.head; out_cluster: - ocfs2_meta_unlock(orphan_dir_inode, 0); + ocfs2_inode_unlock(orphan_dir_inode, 0); out: mutex_unlock(&orphan_dir_inode->i_mutex); iput(orphan_dir_inode); diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c index 58ea88b5af36..0de0792fce7f 100644 --- a/fs/ocfs2/localalloc.c +++ b/fs/ocfs2/localalloc.c @@ -231,7 +231,7 @@ void ocfs2_shutdown_local_alloc(struct ocfs2_super *osb) mutex_lock(&main_bm_inode->i_mutex); - status = ocfs2_meta_lock(main_bm_inode, &main_bm_bh, 1); + status = ocfs2_inode_lock(main_bm_inode, &main_bm_bh, 1); if (status < 0) { mlog_errno(status); goto out_mutex; @@ -286,7 +286,7 @@ out_unlock: if (main_bm_bh) brelse(main_bm_bh); - ocfs2_meta_unlock(main_bm_inode, 1); + ocfs2_inode_unlock(main_bm_inode, 1); out_mutex: mutex_unlock(&main_bm_inode->i_mutex); @@ -399,7 +399,7 @@ int ocfs2_complete_local_alloc_recovery(struct ocfs2_super *osb, mutex_lock(&main_bm_inode->i_mutex); - status = ocfs2_meta_lock(main_bm_inode, &main_bm_bh, 1); + status = ocfs2_inode_lock(main_bm_inode, &main_bm_bh, 1); if (status < 0) { mlog_errno(status); goto out_mutex; @@ -424,7 +424,7 @@ int ocfs2_complete_local_alloc_recovery(struct ocfs2_super *osb, ocfs2_commit_trans(osb, handle); out_unlock: - ocfs2_meta_unlock(main_bm_inode, 1); + ocfs2_inode_unlock(main_bm_inode, 1); out_mutex: mutex_unlock(&main_bm_inode->i_mutex); diff --git a/fs/ocfs2/mmap.c b/fs/ocfs2/mmap.c index a7f0ccc6fdd8..3dc18d67557c 100644 --- a/fs/ocfs2/mmap.c +++ b/fs/ocfs2/mmap.c @@ -168,7 +168,7 @@ static int ocfs2_page_mkwrite(struct vm_area_struct *vma, struct page *page) * node. Taking the data lock will also ensure that we don't * attempt page truncation as part of a downconvert. */ - ret = ocfs2_meta_lock(inode, &di_bh, 1); + ret = ocfs2_inode_lock(inode, &di_bh, 1); if (ret < 0) { mlog_errno(ret); goto out; @@ -186,7 +186,7 @@ static int ocfs2_page_mkwrite(struct vm_area_struct *vma, struct page *page) up_write(&OCFS2_I(inode)->ip_alloc_sem); brelse(di_bh); - ocfs2_meta_unlock(inode, 1); + ocfs2_inode_unlock(inode, 1); out: ret2 = ocfs2_vm_op_unblock_sigs(&oldset); @@ -205,13 +205,13 @@ int ocfs2_mmap(struct file *file, struct vm_area_struct *vma) { int ret = 0, lock_level = 0; - ret = ocfs2_meta_lock_atime(file->f_dentry->d_inode, + ret = ocfs2_inode_lock_atime(file->f_dentry->d_inode, file->f_vfsmnt, &lock_level); if (ret < 0) { mlog_errno(ret); goto out; } - ocfs2_meta_unlock(file->f_dentry->d_inode, lock_level); + ocfs2_inode_unlock(file->f_dentry->d_inode, lock_level); out: vma->vm_ops = &ocfs2_file_vm_ops; vma->vm_flags |= VM_CAN_NONLINEAR; diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c index 6295fd6ae469..74018caf8053 100644 --- a/fs/ocfs2/namei.c +++ b/fs/ocfs2/namei.c @@ -115,7 +115,7 @@ static struct dentry *ocfs2_lookup(struct inode *dir, struct dentry *dentry, mlog(0, "find name %.*s in directory %llu\n", dentry->d_name.len, dentry->d_name.name, (unsigned long long)OCFS2_I(dir)->ip_blkno); - status = ocfs2_meta_lock(dir, NULL, 0); + status = ocfs2_inode_lock(dir, NULL, 0); if (status < 0) { if (status != -ENOENT) mlog_errno(status); @@ -176,7 +176,7 @@ bail_unlock: * unlink on another node will message us to remove that * dentry under this lock so otherwise we can race this with * the downconvert thread and have a stale dentry. */ - ocfs2_meta_unlock(dir, 0); + ocfs2_inode_unlock(dir, 0); bail: @@ -208,7 +208,7 @@ static int ocfs2_mknod(struct inode *dir, /* get our super block */ osb = OCFS2_SB(dir->i_sb); - status = ocfs2_meta_lock(dir, &parent_fe_bh, 1); + status = ocfs2_inode_lock(dir, &parent_fe_bh, 1); if (status < 0) { if (status != -ENOENT) mlog_errno(status); @@ -322,7 +322,7 @@ leave: if (handle) ocfs2_commit_trans(osb, handle); - ocfs2_meta_unlock(dir, 1); + ocfs2_inode_unlock(dir, 1); if (status == -ENOSPC) mlog(0, "Disk is full\n"); @@ -552,7 +552,7 @@ static int ocfs2_link(struct dentry *old_dentry, if (S_ISDIR(inode->i_mode)) return -EPERM; - err = ocfs2_meta_lock(dir, &parent_fe_bh, 1); + err = ocfs2_inode_lock(dir, &parent_fe_bh, 1); if (err < 0) { if (err != -ENOENT) mlog_errno(err); @@ -577,7 +577,7 @@ static int ocfs2_link(struct dentry *old_dentry, goto out; } - err = ocfs2_meta_lock(inode, &fe_bh, 1); + err = ocfs2_inode_lock(inode, &fe_bh, 1); if (err < 0) { if (err != -ENOENT) mlog_errno(err); @@ -642,10 +642,10 @@ static int ocfs2_link(struct dentry *old_dentry, out_commit: ocfs2_commit_trans(osb, handle); out_unlock_inode: - ocfs2_meta_unlock(inode, 1); + ocfs2_inode_unlock(inode, 1); out: - ocfs2_meta_unlock(dir, 1); + ocfs2_inode_unlock(dir, 1); if (de_bh) brelse(de_bh); @@ -719,7 +719,7 @@ static int ocfs2_unlink(struct inode *dir, return -EPERM; } - status = ocfs2_meta_lock(dir, &parent_node_bh, 1); + status = ocfs2_inode_lock(dir, &parent_node_bh, 1); if (status < 0) { if (status != -ENOENT) mlog_errno(status); @@ -744,7 +744,7 @@ static int ocfs2_unlink(struct inode *dir, goto leave; } - status = ocfs2_meta_lock(inode, &fe_bh, 1); + status = ocfs2_inode_lock(inode, &fe_bh, 1); if (status < 0) { if (status != -ENOENT) mlog_errno(status); @@ -840,13 +840,13 @@ leave: ocfs2_commit_trans(osb, handle); if (child_locked) - ocfs2_meta_unlock(inode, 1); + ocfs2_inode_unlock(inode, 1); - ocfs2_meta_unlock(dir, 1); + ocfs2_inode_unlock(dir, 1); if (orphan_dir) { /* This was locked for us in ocfs2_prepare_orphan_dir() */ - ocfs2_meta_unlock(orphan_dir, 1); + ocfs2_inode_unlock(orphan_dir, 1); mutex_unlock(&orphan_dir->i_mutex); iput(orphan_dir); } @@ -907,7 +907,7 @@ static int ocfs2_double_lock(struct ocfs2_super *osb, inode1 = tmpinode; } /* lock id2 */ - status = ocfs2_meta_lock(inode2, bh2, 1); + status = ocfs2_inode_lock(inode2, bh2, 1); if (status < 0) { if (status != -ENOENT) mlog_errno(status); @@ -916,14 +916,14 @@ static int ocfs2_double_lock(struct ocfs2_super *osb, } /* lock id1 */ - status = ocfs2_meta_lock(inode1, bh1, 1); + status = ocfs2_inode_lock(inode1, bh1, 1); if (status < 0) { /* * An error return must mean that no cluster locks * were held on function exit. */ if (oi1->ip_blkno != oi2->ip_blkno) - ocfs2_meta_unlock(inode2, 1); + ocfs2_inode_unlock(inode2, 1); if (status != -ENOENT) mlog_errno(status); @@ -936,10 +936,10 @@ bail: static void ocfs2_double_unlock(struct inode *inode1, struct inode *inode2) { - ocfs2_meta_unlock(inode1, 1); + ocfs2_inode_unlock(inode1, 1); if (inode1 != inode2) - ocfs2_meta_unlock(inode2, 1); + ocfs2_inode_unlock(inode2, 1); } static int ocfs2_rename(struct inode *old_dir, @@ -1034,7 +1034,7 @@ static int ocfs2_rename(struct inode *old_dir, * won't have to concurrently downconvert the inode and the * dentry locks. */ - status = ocfs2_meta_lock(old_inode, &old_inode_bh, 1); + status = ocfs2_inode_lock(old_inode, &old_inode_bh, 1); if (status < 0) { if (status != -ENOENT) mlog_errno(status); @@ -1143,7 +1143,7 @@ static int ocfs2_rename(struct inode *old_dir, goto bail; } - status = ocfs2_meta_lock(new_inode, &newfe_bh, 1); + status = ocfs2_inode_lock(new_inode, &newfe_bh, 1); if (status < 0) { if (status != -ENOENT) mlog_errno(status); @@ -1355,14 +1355,14 @@ bail: ocfs2_double_unlock(old_dir, new_dir); if (old_child_locked) - ocfs2_meta_unlock(old_inode, 1); + ocfs2_inode_unlock(old_inode, 1); if (new_child_locked) - ocfs2_meta_unlock(new_inode, 1); + ocfs2_inode_unlock(new_inode, 1); if (orphan_dir) { /* This was locked for us in ocfs2_prepare_orphan_dir() */ - ocfs2_meta_unlock(orphan_dir, 1); + ocfs2_inode_unlock(orphan_dir, 1); mutex_unlock(&orphan_dir->i_mutex); iput(orphan_dir); } @@ -1530,7 +1530,7 @@ static int ocfs2_symlink(struct inode *dir, credits = ocfs2_calc_symlink_credits(sb); /* lock the parent directory */ - status = ocfs2_meta_lock(dir, &parent_fe_bh, 1); + status = ocfs2_inode_lock(dir, &parent_fe_bh, 1); if (status < 0) { if (status != -ENOENT) mlog_errno(status); @@ -1657,7 +1657,7 @@ bail: if (handle) ocfs2_commit_trans(osb, handle); - ocfs2_meta_unlock(dir, 1); + ocfs2_inode_unlock(dir, 1); if (new_fe_bh) brelse(new_fe_bh); @@ -1735,7 +1735,7 @@ static int ocfs2_prepare_orphan_dir(struct ocfs2_super *osb, mutex_lock(&orphan_dir_inode->i_mutex); - status = ocfs2_meta_lock(orphan_dir_inode, &orphan_dir_bh, 1); + status = ocfs2_inode_lock(orphan_dir_inode, &orphan_dir_bh, 1); if (status < 0) { mlog_errno(status); goto leave; @@ -1745,7 +1745,7 @@ static int ocfs2_prepare_orphan_dir(struct ocfs2_super *osb, orphan_dir_bh, name, OCFS2_ORPHAN_NAMELEN, de_bh); if (status < 0) { - ocfs2_meta_unlock(orphan_dir_inode, 1); + ocfs2_inode_unlock(orphan_dir_inode, 1); mlog_errno(status); goto leave; diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c index 8f09f5235e3a..6df4dbf67d18 100644 --- a/fs/ocfs2/suballoc.c +++ b/fs/ocfs2/suballoc.c @@ -114,7 +114,7 @@ void ocfs2_free_alloc_context(struct ocfs2_alloc_context *ac) if (inode) { if (ac->ac_which != OCFS2_AC_USE_LOCAL) - ocfs2_meta_unlock(inode, 1); + ocfs2_inode_unlock(inode, 1); mutex_unlock(&inode->i_mutex); @@ -412,7 +412,7 @@ static int ocfs2_reserve_suballoc_bits(struct ocfs2_super *osb, mutex_lock(&alloc_inode->i_mutex); - status = ocfs2_meta_lock(alloc_inode, &bh, 1); + status = ocfs2_inode_lock(alloc_inode, &bh, 1); if (status < 0) { mutex_unlock(&alloc_inode->i_mutex); iput(alloc_inode); diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index 064eba074f1e..7708df36e223 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -964,7 +964,7 @@ static int ocfs2_statfs(struct dentry *dentry, struct kstatfs *buf) goto bail; } - status = ocfs2_meta_lock(inode, &bh, 0); + status = ocfs2_inode_lock(inode, &bh, 0); if (status < 0) { mlog_errno(status); goto bail; @@ -988,7 +988,7 @@ static int ocfs2_statfs(struct dentry *dentry, struct kstatfs *buf) brelse(bh); - ocfs2_meta_unlock(inode, 0); + ocfs2_inode_unlock(inode, 0); status = 0; bail: if (inode) @@ -1019,7 +1019,7 @@ static void ocfs2_inode_init_once(struct kmem_cache *cachep, void *data) oi->ip_clusters = 0; ocfs2_lock_res_init_once(&oi->ip_rw_lockres); - ocfs2_lock_res_init_once(&oi->ip_meta_lockres); + ocfs2_lock_res_init_once(&oi->ip_inode_lockres); ocfs2_lock_res_init_once(&oi->ip_open_lockres); ocfs2_metadata_cache_init(&oi->vfs_inode); -- cgit v1.2.3-59-g8ed1b From d69a3ad6a0e47b2aa9b2b2ddfd385752132a4d34 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Fri, 5 Oct 2007 14:31:44 -0700 Subject: dlm: Split lock mode and flag constants into a sharable header. This allows others to use the DLM constants without being tied to the function API of fs/dlm. Signed-off-by: Joel Becker Signed-off-by: Steven Whitehouse Signed-off-by: David Teigland Signed-off-by: Mark Fasheh --- include/linux/Kbuild | 1 + include/linux/dlm.h | 140 +------------------------------------ include/linux/dlmconstants.h | 159 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 162 insertions(+), 138 deletions(-) create mode 100644 include/linux/dlmconstants.h diff --git a/include/linux/Kbuild b/include/linux/Kbuild index f30fa92a44a1..bd694f779346 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -49,6 +49,7 @@ header-y += comstats.h header-y += const.h header-y += cgroupstats.h header-y += cycx_cfm.h +header-y += dlmconstants.h header-y += dlm_device.h header-y += dlm_netlink.h header-y += dm-ioctl.h diff --git a/include/linux/dlm.h b/include/linux/dlm.h index be9d278761e0..c743fbc769db 100644 --- a/include/linux/dlm.h +++ b/include/linux/dlm.h @@ -19,148 +19,12 @@ * routines and structures to use DLM lockspaces */ -/* - * Lock Modes - */ +/* Lock levels and flags are here */ +#include -#define DLM_LOCK_IV -1 /* invalid */ -#define DLM_LOCK_NL 0 /* null */ -#define DLM_LOCK_CR 1 /* concurrent read */ -#define DLM_LOCK_CW 2 /* concurrent write */ -#define DLM_LOCK_PR 3 /* protected read */ -#define DLM_LOCK_PW 4 /* protected write */ -#define DLM_LOCK_EX 5 /* exclusive */ - -/* - * Maximum size in bytes of a dlm_lock name - */ #define DLM_RESNAME_MAXLEN 64 -/* - * Flags to dlm_lock - * - * DLM_LKF_NOQUEUE - * - * Do not queue the lock request on the wait queue if it cannot be granted - * immediately. If the lock cannot be granted because of this flag, DLM will - * either return -EAGAIN from the dlm_lock call or will return 0 from - * dlm_lock and -EAGAIN in the lock status block when the AST is executed. - * - * DLM_LKF_CANCEL - * - * Used to cancel a pending lock request or conversion. A converting lock is - * returned to its previously granted mode. - * - * DLM_LKF_CONVERT - * - * Indicates a lock conversion request. For conversions the name and namelen - * are ignored and the lock ID in the LKSB is used to identify the lock. - * - * DLM_LKF_VALBLK - * - * Requests DLM to return the current contents of the lock value block in the - * lock status block. When this flag is set in a lock conversion from PW or EX - * modes, DLM assigns the value specified in the lock status block to the lock - * value block of the lock resource. The LVB is a DLM_LVB_LEN size array - * containing application-specific information. - * - * DLM_LKF_QUECVT - * - * Force a conversion request to be queued, even if it is compatible with - * the granted modes of other locks on the same resource. - * - * DLM_LKF_IVVALBLK - * - * Invalidate the lock value block. - * - * DLM_LKF_CONVDEADLK - * - * Allows the dlm to resolve conversion deadlocks internally by demoting the - * granted mode of a converting lock to NL. The DLM_SBF_DEMOTED flag is - * returned for a conversion that's been effected by this. - * - * DLM_LKF_PERSISTENT - * - * Only relevant to locks originating in userspace. A persistent lock will not - * be removed if the process holding the lock exits. - * - * DLM_LKF_NODLCKWT - * - * Do not cancel the lock if it gets into conversion deadlock. - * Exclude this lock from being monitored due to DLM_LSFL_TIMEWARN. - * - * DLM_LKF_NODLCKBLK - * - * net yet implemented - * - * DLM_LKF_EXPEDITE - * - * Used only with new requests for NL mode locks. Tells the lock manager - * to grant the lock, ignoring other locks in convert and wait queues. - * - * DLM_LKF_NOQUEUEBAST - * - * Send blocking AST's before returning -EAGAIN to the caller. It is only - * used along with the NOQUEUE flag. Blocking AST's are not sent for failed - * NOQUEUE requests otherwise. - * - * DLM_LKF_HEADQUE - * - * Add a lock to the head of the convert or wait queue rather than the tail. - * - * DLM_LKF_NOORDER - * - * Disregard the standard grant order rules and grant a lock as soon as it - * is compatible with other granted locks. - * - * DLM_LKF_ORPHAN - * - * not yet implemented - * - * DLM_LKF_ALTPR - * - * If the requested mode cannot be granted immediately, try to grant the lock - * in PR mode instead. If this alternate mode is granted instead of the - * requested mode, DLM_SBF_ALTMODE is returned in the lksb. - * - * DLM_LKF_ALTCW - * - * The same as ALTPR, but the alternate mode is CW. - * - * DLM_LKF_FORCEUNLOCK - * - * Unlock the lock even if it is converting or waiting or has sublocks. - * Only really for use by the userland device.c code. - * - */ - -#define DLM_LKF_NOQUEUE 0x00000001 -#define DLM_LKF_CANCEL 0x00000002 -#define DLM_LKF_CONVERT 0x00000004 -#define DLM_LKF_VALBLK 0x00000008 -#define DLM_LKF_QUECVT 0x00000010 -#define DLM_LKF_IVVALBLK 0x00000020 -#define DLM_LKF_CONVDEADLK 0x00000040 -#define DLM_LKF_PERSISTENT 0x00000080 -#define DLM_LKF_NODLCKWT 0x00000100 -#define DLM_LKF_NODLCKBLK 0x00000200 -#define DLM_LKF_EXPEDITE 0x00000400 -#define DLM_LKF_NOQUEUEBAST 0x00000800 -#define DLM_LKF_HEADQUE 0x00001000 -#define DLM_LKF_NOORDER 0x00002000 -#define DLM_LKF_ORPHAN 0x00004000 -#define DLM_LKF_ALTPR 0x00008000 -#define DLM_LKF_ALTCW 0x00010000 -#define DLM_LKF_FORCEUNLOCK 0x00020000 -#define DLM_LKF_TIMEOUT 0x00040000 - -/* - * Some return codes that are not in errno.h - */ - -#define DLM_ECANCEL 0x10001 -#define DLM_EUNLOCK 0x10002 typedef void dlm_lockspace_t; diff --git a/include/linux/dlmconstants.h b/include/linux/dlmconstants.h new file mode 100644 index 000000000000..fddb3d3ff321 --- /dev/null +++ b/include/linux/dlmconstants.h @@ -0,0 +1,159 @@ +/****************************************************************************** +******************************************************************************* +** +** Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved. +** Copyright (C) 2004-2007 Red Hat, Inc. All rights reserved. +** +** This copyrighted material is made available to anyone wishing to use, +** modify, copy, or redistribute it subject to the terms and conditions +** of the GNU General Public License v.2. +** +******************************************************************************* +******************************************************************************/ + +#ifndef __DLMCONSTANTS_DOT_H__ +#define __DLMCONSTANTS_DOT_H__ + +/* + * Constants used by DLM interface. + */ + +/* + * Lock Modes + */ + +#define DLM_LOCK_IV (-1) /* invalid */ +#define DLM_LOCK_NL 0 /* null */ +#define DLM_LOCK_CR 1 /* concurrent read */ +#define DLM_LOCK_CW 2 /* concurrent write */ +#define DLM_LOCK_PR 3 /* protected read */ +#define DLM_LOCK_PW 4 /* protected write */ +#define DLM_LOCK_EX 5 /* exclusive */ + + +/* + * Flags to dlm_lock + * + * DLM_LKF_NOQUEUE + * + * Do not queue the lock request on the wait queue if it cannot be granted + * immediately. If the lock cannot be granted because of this flag, DLM will + * either return -EAGAIN from the dlm_lock call or will return 0 from + * dlm_lock and -EAGAIN in the lock status block when the AST is executed. + * + * DLM_LKF_CANCEL + * + * Used to cancel a pending lock request or conversion. A converting lock is + * returned to its previously granted mode. + * + * DLM_LKF_CONVERT + * + * Indicates a lock conversion request. For conversions the name and namelen + * are ignored and the lock ID in the LKSB is used to identify the lock. + * + * DLM_LKF_VALBLK + * + * Requests DLM to return the current contents of the lock value block in the + * lock status block. When this flag is set in a lock conversion from PW or EX + * modes, DLM assigns the value specified in the lock status block to the lock + * value block of the lock resource. The LVB is a DLM_LVB_LEN size array + * containing application-specific information. + * + * DLM_LKF_QUECVT + * + * Force a conversion request to be queued, even if it is compatible with + * the granted modes of other locks on the same resource. + * + * DLM_LKF_IVVALBLK + * + * Invalidate the lock value block. + * + * DLM_LKF_CONVDEADLK + * + * Allows the dlm to resolve conversion deadlocks internally by demoting the + * granted mode of a converting lock to NL. The DLM_SBF_DEMOTED flag is + * returned for a conversion that's been effected by this. + * + * DLM_LKF_PERSISTENT + * + * Only relevant to locks originating in userspace. A persistent lock will not + * be removed if the process holding the lock exits. + * + * DLM_LKF_NODLCKWT + * + * Do not cancel the lock if it gets into conversion deadlock. + * Exclude this lock from being monitored due to DLM_LSFL_TIMEWARN. + * + * DLM_LKF_NODLCKBLK + * + * net yet implemented + * + * DLM_LKF_EXPEDITE + * + * Used only with new requests for NL mode locks. Tells the lock manager + * to grant the lock, ignoring other locks in convert and wait queues. + * + * DLM_LKF_NOQUEUEBAST + * + * Send blocking AST's before returning -EAGAIN to the caller. It is only + * used along with the NOQUEUE flag. Blocking AST's are not sent for failed + * NOQUEUE requests otherwise. + * + * DLM_LKF_HEADQUE + * + * Add a lock to the head of the convert or wait queue rather than the tail. + * + * DLM_LKF_NOORDER + * + * Disregard the standard grant order rules and grant a lock as soon as it + * is compatible with other granted locks. + * + * DLM_LKF_ORPHAN + * + * not yet implemented + * + * DLM_LKF_ALTPR + * + * If the requested mode cannot be granted immediately, try to grant the lock + * in PR mode instead. If this alternate mode is granted instead of the + * requested mode, DLM_SBF_ALTMODE is returned in the lksb. + * + * DLM_LKF_ALTCW + * + * The same as ALTPR, but the alternate mode is CW. + * + * DLM_LKF_FORCEUNLOCK + * + * Unlock the lock even if it is converting or waiting or has sublocks. + * Only really for use by the userland device.c code. + * + */ + +#define DLM_LKF_NOQUEUE 0x00000001 +#define DLM_LKF_CANCEL 0x00000002 +#define DLM_LKF_CONVERT 0x00000004 +#define DLM_LKF_VALBLK 0x00000008 +#define DLM_LKF_QUECVT 0x00000010 +#define DLM_LKF_IVVALBLK 0x00000020 +#define DLM_LKF_CONVDEADLK 0x00000040 +#define DLM_LKF_PERSISTENT 0x00000080 +#define DLM_LKF_NODLCKWT 0x00000100 +#define DLM_LKF_NODLCKBLK 0x00000200 +#define DLM_LKF_EXPEDITE 0x00000400 +#define DLM_LKF_NOQUEUEBAST 0x00000800 +#define DLM_LKF_HEADQUE 0x00001000 +#define DLM_LKF_NOORDER 0x00002000 +#define DLM_LKF_ORPHAN 0x00004000 +#define DLM_LKF_ALTPR 0x00008000 +#define DLM_LKF_ALTCW 0x00010000 +#define DLM_LKF_FORCEUNLOCK 0x00020000 +#define DLM_LKF_TIMEOUT 0x00040000 + +/* + * Some return codes that are not in errno.h + */ + +#define DLM_ECANCEL 0x10001 +#define DLM_EUNLOCK 0x10002 + +#endif /* __DLMCONSTANTS_DOT_H__ */ -- cgit v1.2.3-59-g8ed1b From 628a24f5bdf31b795d596eaed71670579b96a9aa Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Tue, 30 Oct 2007 12:08:32 -0700 Subject: ocfs2: Readpages support Add ->readpages support to Ocfs2. This is rather trivial - all it required is a small update to ocfs2_get_block (for mapping full extents via b_size) and an ocfs2_readpages() function which partially mirrors ocfs2_readpage(). Signed-off-by: Mark Fasheh --- fs/ocfs2/aops.c | 68 +++++++++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 66 insertions(+), 2 deletions(-) diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c index ac8c39055717..286af3a11383 100644 --- a/fs/ocfs2/aops.c +++ b/fs/ocfs2/aops.c @@ -26,6 +26,7 @@ #include #include #include +#include #define MLOG_MASK_PREFIX ML_FILE_IO #include @@ -139,7 +140,8 @@ static int ocfs2_get_block(struct inode *inode, sector_t iblock, { int err = 0; unsigned int ext_flags; - u64 p_blkno, past_eof; + u64 max_blocks = bh_result->b_size >> inode->i_blkbits; + u64 p_blkno, count, past_eof; struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); mlog_entry("(0x%p, %llu, 0x%p, %d)\n", inode, @@ -155,7 +157,7 @@ static int ocfs2_get_block(struct inode *inode, sector_t iblock, goto bail; } - err = ocfs2_extent_map_get_blocks(inode, iblock, &p_blkno, NULL, + err = ocfs2_extent_map_get_blocks(inode, iblock, &p_blkno, &count, &ext_flags); if (err) { mlog(ML_ERROR, "Error %d from get_blocks(0x%p, %llu, 1, " @@ -164,6 +166,9 @@ static int ocfs2_get_block(struct inode *inode, sector_t iblock, goto bail; } + if (max_blocks < count) + count = max_blocks; + /* * ocfs2 never allocates in this function - the only time we * need to use BH_New is when we're extending i_size on a file @@ -178,6 +183,8 @@ static int ocfs2_get_block(struct inode *inode, sector_t iblock, if (p_blkno && !(ext_flags & OCFS2_EXT_UNWRITTEN)) map_bh(bh_result, inode->i_sb, p_blkno); + bh_result->b_size = count << inode->i_blkbits; + if (!ocfs2_sparse_alloc(osb)) { if (p_blkno == 0) { err = -EIO; @@ -322,6 +329,62 @@ out: return ret; } +/* + * This is used only for read-ahead. Failures or difficult to handle + * situations are safe to ignore. + * + * Right now, we don't bother with BH_Boundary - in-inode extent lists + * are quite large (243 extents on 4k blocks), so most inodes don't + * grow out to a tree. If need be, detecting boundary extents could + * trivially be added in a future version of ocfs2_get_block(). + */ +static int ocfs2_readpages(struct file *filp, struct address_space *mapping, + struct list_head *pages, unsigned nr_pages) +{ + int ret, err = -EIO; + struct inode *inode = mapping->host; + struct ocfs2_inode_info *oi = OCFS2_I(inode); + loff_t start; + struct page *last; + + /* + * Use the nonblocking flag for the dlm code to avoid page + * lock inversion, but don't bother with retrying. + */ + ret = ocfs2_inode_lock_full(inode, NULL, 0, OCFS2_LOCK_NONBLOCK); + if (ret) + return err; + + if (down_read_trylock(&oi->ip_alloc_sem) == 0) { + ocfs2_inode_unlock(inode, 0); + return err; + } + + /* + * Don't bother with inline-data. There isn't anything + * to read-ahead in that case anyway... + */ + if (oi->ip_dyn_features & OCFS2_INLINE_DATA_FL) + goto out_unlock; + + /* + * Check whether a remote node truncated this file - we just + * drop out in that case as it's not worth handling here. + */ + last = list_entry(pages->prev, struct page, lru); + start = (loff_t)last->index << PAGE_CACHE_SHIFT; + if (start >= i_size_read(inode)) + goto out_unlock; + + err = mpage_readpages(mapping, pages, nr_pages, ocfs2_get_block); + +out_unlock: + up_read(&oi->ip_alloc_sem); + ocfs2_inode_unlock(inode, 0); + + return err; +} + /* Note: Because we don't support holes, our allocation has * already happened (allocation writes zeros to the file data) * so we don't have to worry about ordered writes in @@ -1877,6 +1940,7 @@ static int ocfs2_write_end(struct file *file, struct address_space *mapping, const struct address_space_operations ocfs2_aops = { .readpage = ocfs2_readpage, + .readpages = ocfs2_readpages, .writepage = ocfs2_writepage, .write_begin = ocfs2_write_begin, .write_end = ocfs2_write_end, -- cgit v1.2.3-59-g8ed1b From 1252c434e39dc60ca9e8ed682f3e04930e2c08de Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Tue, 30 Oct 2007 12:09:03 -0700 Subject: ocfs2: Documentation update Remove 'readpages' from the list in ocfs2.txt. Instead of having two identical lists, I just removed the list in the OCFS2 section of fs/Kconfig and added a pointer to Documentation/filesystems/ocfs2.txt. Signed-off-by: Mark Fasheh --- Documentation/filesystems/ocfs2.txt | 1 - fs/Kconfig | 10 ++-------- 2 files changed, 2 insertions(+), 9 deletions(-) diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt index ed55238023a9..e78abdcc59ee 100644 --- a/Documentation/filesystems/ocfs2.txt +++ b/Documentation/filesystems/ocfs2.txt @@ -35,7 +35,6 @@ Features which OCFS2 does not support yet: - Directory change notification (F_NOTIFY) - Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease) - POSIX ACLs - - readpages / writepages (not user visible) Mount options ============= diff --git a/fs/Kconfig b/fs/Kconfig index 781b47d2f9f2..16598a417423 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -440,14 +440,8 @@ config OCFS2_FS Tools web page: http://oss.oracle.com/projects/ocfs2-tools OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/ - Note: Features which OCFS2 does not support yet: - - extended attributes - - quotas - - cluster aware flock - - Directory change notification (F_NOTIFY) - - Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease) - - POSIX ACLs - - readpages / writepages (not user visible) + For more information on OCFS2, see the file + . config OCFS2_DEBUG_MASKLOG bool "OCFS2 logging support" -- cgit v1.2.3-59-g8ed1b From 946fef4e14ebc2f14ab05f54789843621fe87f60 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sat, 26 Jan 2008 09:48:44 +1100 Subject: [CRYPTO] hifn795x: Disallow built-in hifn795x when HW_RANDOM is m Currently it is possible to select HW_RANDOM as a module and have hifn795x built-in. This causes a build problem because hifn795x will then call hwrng_register which isn't built-in. This patch introduces a new config option to control the hifn795x RNG which lets us avoid this problem. Signed-off-by: Herbert Xu --- drivers/crypto/Kconfig | 8 +++++++- drivers/crypto/hifn_795x.c | 6 +++--- 2 files changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig index 74bd599dfb0c..8a70a9edabda 100644 --- a/drivers/crypto/Kconfig +++ b/drivers/crypto/Kconfig @@ -88,10 +88,16 @@ config CRYPTO_DEV_HIFN_795X select CRYPTO_DES select CRYPTO_ALGAPI select CRYPTO_BLKCIPHER + select HW_RANDOM if CRYPTO_DEV_HIFN_795X_RNG depends on PCI help This option allows you to have support for HIFN 795x crypto adapters. - +config CRYPTO_DEV_HIFN_795X_RNG + bool "HIFN 795x random number generator" + depends on CRYPTO_DEV_HIFN_795X + help + Select this option if you want to enable the random number generator + on the HIFN 795x crypto adapters. endif # CRYPTO_HW diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c index 16413e57597c..dfbf24c4033c 100644 --- a/drivers/crypto/hifn_795x.c +++ b/drivers/crypto/hifn_795x.c @@ -463,7 +463,7 @@ struct hifn_device unsigned int pk_clk_freq; -#if defined(CONFIG_HW_RANDOM) || defined(CONFIG_HW_RANDOM_MODULE) +#ifdef CRYPTO_DEV_HIFN_795X_RNG unsigned int rng_wait_time; ktime_t rngtime; struct hwrng rng; @@ -795,7 +795,7 @@ static struct pci2id { } }; -#if defined(CONFIG_HW_RANDOM) || defined(CONFIG_HW_RANDOM_MODULE) +#ifdef CRYPTO_DEV_HIFN_795X_RNG static int hifn_rng_data_present(struct hwrng *rng, int wait) { struct hifn_device *dev = (struct hifn_device *)rng->priv; @@ -880,7 +880,7 @@ static int hifn_init_pubrng(struct hifn_device *dev) dprintk("Chip %s: RNG engine has been successfully initialised.\n", dev->name); -#if defined(CONFIG_HW_RANDOM) || defined(CONFIG_HW_RANDOM_MODULE) +#ifdef CRYPTO_DEV_HIFN_795X_RNG /* First value must be discarded */ hifn_read_1(dev, HIFN_1_RNG_DATA); dev->rngtime = ktime_get(); -- cgit v1.2.3-59-g8ed1b From e9d578a8f279d5e7d1e903f436aefc76ba330b43 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Tue, 18 Dec 2007 15:46:10 +0800 Subject: ocfs2: Initalize bitmap_cpg of ocfs2_super to be the maximum. This value is initialized from global_bitmap->id2.i_chain.cl_cpg. If there is only 1 group, it will be equal to the total clusters in the volume. So as for online resize, it should change for all the nodes in the cluster. It isn't easy and there is no corresponding lock for it. bitmap_cpg is only used in 2 areas: 1. Check whether the suballoc is too large for us to allocate from the global bitmap, so it is little used. And now the suballoc size is 2048, it rarely meet this situation and the check is almost useless. 2. Calculate which group a cluster belongs to. We use it during truncate to figure out which cluster group an extent belongs too. But we should be OK if we increase it though as the cluster group calculated shouldn't change and we only ever have a small bitmap_cpg on file systems with a single cluster group. Signed-off-by: Tao Ma Signed-off-by: Mark Fasheh --- fs/ocfs2/super.c | 19 +------------------ 1 file changed, 1 insertion(+), 18 deletions(-) diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index 7708df36e223..479ac50c86d9 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -1280,7 +1280,6 @@ static int ocfs2_initialize_super(struct super_block *sb, int i, cbits, bbits; struct ocfs2_dinode *di = (struct ocfs2_dinode *)bh->b_data; struct inode *inode = NULL; - struct buffer_head *bitmap_bh = NULL; struct ocfs2_journal *journal; __le32 uuid_net_key; struct ocfs2_super *osb; @@ -1497,25 +1496,9 @@ static int ocfs2_initialize_super(struct super_block *sb, } osb->bitmap_blkno = OCFS2_I(inode)->ip_blkno; - - /* We don't have a cluster lock on the bitmap here because - * we're only interested in static information and the extra - * complexity at mount time isn't worht it. Don't pass the - * inode in to the read function though as we don't want it to - * be put in the cache. */ - status = ocfs2_read_block(osb, osb->bitmap_blkno, &bitmap_bh, 0, - NULL); iput(inode); - if (status < 0) { - mlog_errno(status); - goto bail; - } - di = (struct ocfs2_dinode *) bitmap_bh->b_data; - osb->bitmap_cpg = le16_to_cpu(di->id2.i_chain.cl_cpg); - brelse(bitmap_bh); - mlog(0, "cluster bitmap inode: %llu, clusters per group: %u\n", - (unsigned long long)osb->bitmap_blkno, osb->bitmap_cpg); + osb->bitmap_cpg = ocfs2_group_bitmap_size(sb) * 8; status = ocfs2_init_slot_info(osb); if (status < 0) { -- cgit v1.2.3-59-g8ed1b From 7f68fc28219be3b44ef4132f95c6506ff3e806b5 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Tue, 18 Dec 2007 15:46:37 +0800 Subject: ocfs2: Reserve ioctl range We need to reserve at least two ioctls for online-resize. Reserve a small range of ioctls for Ocfs2 use in Documentation/ioctl-number.txt. This should give us enough room for future growth. Signed-off-by: Tao Ma Signed-off-by: Mark Fasheh --- Documentation/ioctl-number.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/ioctl-number.txt b/Documentation/ioctl-number.txt index 5c7fbf9d96b4..c18363bd8d11 100644 --- a/Documentation/ioctl-number.txt +++ b/Documentation/ioctl-number.txt @@ -138,6 +138,7 @@ Code Seq# Include File Comments 'm' 00-1F net/irda/irmod.h conflict! 'n' 00-7F linux/ncp_fs.h 'n' E0-FF video/matrox.h matroxfb +'o' 00-1F fs/ocfs2/ocfs2_fs.h OCFS2 'p' 00-0F linux/phantom.h conflict! (OpenHaptics needs this) 'p' 00-3F linux/mc146818rtc.h conflict! 'p' 40-7F linux/nvram.h -- cgit v1.2.3-59-g8ed1b From 23c3e290fb9ce38cabc2822b47583fc8702411bf Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 20 Jan 2008 11:27:29 +0100 Subject: [SCSI] usbstorage: use last_sector_bug flag universally This patch sets the last_sector_bug flag to 1 for all USB disks. This is needed to makes the cardreader on various HP multifunction printers work. Since the performance impact is negible we set this flag for all USB disks to avoid an unusual_devs.h nightmare. Signed-off-by: Hans de Goede Acked-by: Matthew Dharm Signed-off-by: James Bottomley --- drivers/usb/storage/scsiglue.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index dd8b13ef2414..8c1e2954f3b9 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -187,6 +187,10 @@ static int slave_configure(struct scsi_device *sdev) * automatically, requiring a START-STOP UNIT command. */ sdev->allow_restart = 1; + /* Some USB cardreaders have trouble reading an sdcard's last + * sector in a larger then 1 sector read, since the performance + * impact is negible we set this flag for all USB disks */ + sdev->last_sector_bug = 1; } else { /* Non-disk-type devices don't need to blacklist any pages -- cgit v1.2.3-59-g8ed1b From d659072f736837e56b6433d58e5315ad1d4d5ccf Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Tue, 18 Dec 2007 15:47:03 +0800 Subject: [PATCH 1/2] ocfs2: Add group extend for online resize This patch adds the ability for a userspace program to request an extend of last cluster group on an Ocfs2 file system. The request is made via ioctl, OCFS2_IOC_GROUP_EXTEND. This is derived from EXT3_IOC_GROUP_EXTEND, but is obviously Ocfs2 specific. tunefs.ocfs2 would call this for an online-resize operation if the last cluster group isn't full. Signed-off-by: Tao Ma Signed-off-by: Mark Fasheh --- fs/ocfs2/Makefile | 1 + fs/ocfs2/buffer_head_io.c | 61 +++++++ fs/ocfs2/buffer_head_io.h | 2 + fs/ocfs2/ioctl.c | 8 + fs/ocfs2/journal.h | 3 + fs/ocfs2/ocfs2_fs.h | 2 + fs/ocfs2/resize.c | 398 ++++++++++++++++++++++++++++++++++++++++++++++ fs/ocfs2/resize.h | 31 ++++ fs/ocfs2/suballoc.c | 11 +- fs/ocfs2/suballoc.h | 8 + 10 files changed, 518 insertions(+), 7 deletions(-) create mode 100644 fs/ocfs2/resize.c create mode 100644 fs/ocfs2/resize.h diff --git a/fs/ocfs2/Makefile b/fs/ocfs2/Makefile index d2057e7fbda7..3591890b32c6 100644 --- a/fs/ocfs2/Makefile +++ b/fs/ocfs2/Makefile @@ -21,6 +21,7 @@ ocfs2-objs := \ localalloc.o \ mmap.o \ namei.o \ + resize.o \ slot_map.o \ suballoc.o \ super.o \ diff --git a/fs/ocfs2/buffer_head_io.c b/fs/ocfs2/buffer_head_io.c index c9037414f4f6..31aa61dc777b 100644 --- a/fs/ocfs2/buffer_head_io.c +++ b/fs/ocfs2/buffer_head_io.c @@ -280,3 +280,64 @@ bail: mlog_exit(status); return status; } + +/* Check whether the blkno is the super block or one of the backups. */ +static void ocfs2_check_super_or_backup(struct super_block *sb, + sector_t blkno) +{ + int i; + u64 backup_blkno; + + if (blkno == OCFS2_SUPER_BLOCK_BLKNO) + return; + + for (i = 0; i < OCFS2_MAX_BACKUP_SUPERBLOCKS; i++) { + backup_blkno = ocfs2_backup_super_blkno(sb, i); + if (backup_blkno == blkno) + return; + } + + BUG(); +} + +/* + * Write super block and backups doesn't need to collaborate with journal, + * so we don't need to lock ip_io_mutex and inode doesn't need to bea passed + * into this function. + */ +int ocfs2_write_super_or_backup(struct ocfs2_super *osb, + struct buffer_head *bh) +{ + int ret = 0; + + mlog_entry_void(); + + BUG_ON(buffer_jbd(bh)); + ocfs2_check_super_or_backup(osb->sb, bh->b_blocknr); + + if (ocfs2_is_hard_readonly(osb) || ocfs2_is_soft_readonly(osb)) { + ret = -EROFS; + goto out; + } + + lock_buffer(bh); + set_buffer_uptodate(bh); + + /* remove from dirty list before I/O. */ + clear_buffer_dirty(bh); + + get_bh(bh); /* for end_buffer_write_sync() */ + bh->b_end_io = end_buffer_write_sync; + submit_bh(WRITE, bh); + + wait_on_buffer(bh); + + if (!buffer_uptodate(bh)) { + ret = -EIO; + brelse(bh); + } + +out: + mlog_exit(ret); + return ret; +} diff --git a/fs/ocfs2/buffer_head_io.h b/fs/ocfs2/buffer_head_io.h index 6cc20930fac3..c2e78614c3e5 100644 --- a/fs/ocfs2/buffer_head_io.h +++ b/fs/ocfs2/buffer_head_io.h @@ -47,6 +47,8 @@ int ocfs2_read_blocks(struct ocfs2_super *osb, int flags, struct inode *inode); +int ocfs2_write_super_or_backup(struct ocfs2_super *osb, + struct buffer_head *bh); #define OCFS2_BH_CACHED 1 #define OCFS2_BH_READAHEAD 8 diff --git a/fs/ocfs2/ioctl.c b/fs/ocfs2/ioctl.c index 67c2fb4bae91..b74b24ecf0e4 100644 --- a/fs/ocfs2/ioctl.c +++ b/fs/ocfs2/ioctl.c @@ -20,6 +20,7 @@ #include "ocfs2_fs.h" #include "ioctl.h" +#include "resize.h" #include @@ -115,6 +116,7 @@ int ocfs2_ioctl(struct inode * inode, struct file * filp, unsigned int cmd, unsigned long arg) { unsigned int flags; + int new_clusters; int status; struct ocfs2_space_resv sr; @@ -140,6 +142,11 @@ int ocfs2_ioctl(struct inode * inode, struct file * filp, return -EFAULT; return ocfs2_change_file_space(filp, cmd, &sr); + case OCFS2_IOC_GROUP_EXTEND: + if (get_user(new_clusters, (int __user *)arg)) + return -EFAULT; + + return ocfs2_group_extend(inode, new_clusters); default: return -ENOTTY; } @@ -162,6 +169,7 @@ long ocfs2_compat_ioctl(struct file *file, unsigned cmd, unsigned long arg) case OCFS2_IOC_RESVSP64: case OCFS2_IOC_UNRESVSP: case OCFS2_IOC_UNRESVSP64: + case OCFS2_IOC_GROUP_EXTEND: break; default: return -ENOIOCTLCMD; diff --git a/fs/ocfs2/journal.h b/fs/ocfs2/journal.h index 4b32e0961568..0ba3a421ccf2 100644 --- a/fs/ocfs2/journal.h +++ b/fs/ocfs2/journal.h @@ -278,6 +278,9 @@ int ocfs2_journal_dirty_data(handle_t *handle, /* simple file updates like chmod, etc. */ #define OCFS2_INODE_UPDATE_CREDITS 1 +/* group extend. inode update and last group update. */ +#define OCFS2_GROUP_EXTEND_CREDITS (OCFS2_INODE_UPDATE_CREDITS + 1) + /* get one bit out of a suballocator: dinode + group descriptor + * prev. group desc. if we relink. */ #define OCFS2_SUBALLOC_ALLOC (3) diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h index 6ef876759a73..19ac421b613b 100644 --- a/fs/ocfs2/ocfs2_fs.h +++ b/fs/ocfs2/ocfs2_fs.h @@ -231,6 +231,8 @@ struct ocfs2_space_resv { #define OCFS2_IOC_RESVSP64 _IOW ('X', 42, struct ocfs2_space_resv) #define OCFS2_IOC_UNRESVSP64 _IOW ('X', 43, struct ocfs2_space_resv) +#define OCFS2_IOC_GROUP_EXTEND _IOW('o', 1, int) + /* * Journal Flags (ocfs2_dinode.id1.journal1.i_flags) */ diff --git a/fs/ocfs2/resize.c b/fs/ocfs2/resize.c new file mode 100644 index 000000000000..848f7293f4fc --- /dev/null +++ b/fs/ocfs2/resize.c @@ -0,0 +1,398 @@ +/* -*- mode: c; c-basic-offset: 8; -*- + * vim: noexpandtab sw=8 ts=8 sts=0: + * + * resize.c + * + * volume resize. + * Inspired by ext3/resize.c. + * + * Copyright (C) 2007 Oracle. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the + * Free Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 021110-1307, USA. + */ + +#include +#include + +#define MLOG_MASK_PREFIX ML_DISK_ALLOC +#include + +#include "ocfs2.h" + +#include "alloc.h" +#include "dlmglue.h" +#include "inode.h" +#include "journal.h" +#include "super.h" +#include "sysfile.h" +#include "uptodate.h" + +#include "buffer_head_io.h" +#include "suballoc.h" +#include "resize.h" + +/* + * Check whether there are new backup superblocks exist + * in the last group. If there are some, mark them or clear + * them in the bitmap. + * + * Return how many backups we find in the last group. + */ +static u16 ocfs2_calc_new_backup_super(struct inode *inode, + struct ocfs2_group_desc *gd, + int new_clusters, + u32 first_new_cluster, + u16 cl_cpg, + int set) +{ + int i; + u16 backups = 0; + u32 cluster; + u64 blkno, gd_blkno, lgd_blkno = le64_to_cpu(gd->bg_blkno); + + for (i = 0; i < OCFS2_MAX_BACKUP_SUPERBLOCKS; i++) { + blkno = ocfs2_backup_super_blkno(inode->i_sb, i); + cluster = ocfs2_blocks_to_clusters(inode->i_sb, blkno); + + gd_blkno = ocfs2_which_cluster_group(inode, cluster); + if (gd_blkno < lgd_blkno) + continue; + else if (gd_blkno > lgd_blkno) + break; + + if (set) + ocfs2_set_bit(cluster % cl_cpg, + (unsigned long *)gd->bg_bitmap); + else + ocfs2_clear_bit(cluster % cl_cpg, + (unsigned long *)gd->bg_bitmap); + backups++; + } + + mlog_exit_void(); + return backups; +} + +static int ocfs2_update_last_group_and_inode(handle_t *handle, + struct inode *bm_inode, + struct buffer_head *bm_bh, + struct buffer_head *group_bh, + u32 first_new_cluster, + int new_clusters) +{ + int ret = 0; + struct ocfs2_super *osb = OCFS2_SB(bm_inode->i_sb); + struct ocfs2_dinode *fe = (struct ocfs2_dinode *) bm_bh->b_data; + struct ocfs2_chain_list *cl = &fe->id2.i_chain; + struct ocfs2_chain_rec *cr; + struct ocfs2_group_desc *group; + u16 chain, num_bits, backups = 0; + u16 cl_bpc = le16_to_cpu(cl->cl_bpc); + u16 cl_cpg = le16_to_cpu(cl->cl_cpg); + + mlog_entry("(new_clusters=%d, first_new_cluster = %u)\n", + new_clusters, first_new_cluster); + + ret = ocfs2_journal_access(handle, bm_inode, group_bh, + OCFS2_JOURNAL_ACCESS_WRITE); + if (ret < 0) { + mlog_errno(ret); + goto out; + } + + group = (struct ocfs2_group_desc *)group_bh->b_data; + + /* update the group first. */ + num_bits = new_clusters * cl_bpc; + le16_add_cpu(&group->bg_bits, num_bits); + le16_add_cpu(&group->bg_free_bits_count, num_bits); + + /* + * check whether there are some new backup superblocks exist in + * this group and update the group bitmap accordingly. + */ + if (OCFS2_HAS_COMPAT_FEATURE(osb->sb, + OCFS2_FEATURE_COMPAT_BACKUP_SB)) { + backups = ocfs2_calc_new_backup_super(bm_inode, + group, + new_clusters, + first_new_cluster, + cl_cpg, 1); + le16_add_cpu(&group->bg_free_bits_count, -1 * backups); + } + + ret = ocfs2_journal_dirty(handle, group_bh); + if (ret < 0) { + mlog_errno(ret); + goto out_rollback; + } + + /* update the inode accordingly. */ + ret = ocfs2_journal_access(handle, bm_inode, bm_bh, + OCFS2_JOURNAL_ACCESS_WRITE); + if (ret < 0) { + mlog_errno(ret); + goto out_rollback; + } + + chain = le16_to_cpu(group->bg_chain); + cr = (&cl->cl_recs[chain]); + le32_add_cpu(&cr->c_total, num_bits); + le32_add_cpu(&cr->c_free, num_bits); + le32_add_cpu(&fe->id1.bitmap1.i_total, num_bits); + le32_add_cpu(&fe->i_clusters, new_clusters); + + if (backups) { + le32_add_cpu(&cr->c_free, -1 * backups); + le32_add_cpu(&fe->id1.bitmap1.i_used, backups); + } + + spin_lock(&OCFS2_I(bm_inode)->ip_lock); + OCFS2_I(bm_inode)->ip_clusters = le32_to_cpu(fe->i_clusters); + le64_add_cpu(&fe->i_size, new_clusters << osb->s_clustersize_bits); + spin_unlock(&OCFS2_I(bm_inode)->ip_lock); + i_size_write(bm_inode, le64_to_cpu(fe->i_size)); + + ocfs2_journal_dirty(handle, bm_bh); + +out_rollback: + if (ret < 0) { + ocfs2_calc_new_backup_super(bm_inode, + group, + new_clusters, + first_new_cluster, + cl_cpg, 0); + le16_add_cpu(&group->bg_free_bits_count, backups); + le16_add_cpu(&group->bg_bits, -1 * num_bits); + le16_add_cpu(&group->bg_free_bits_count, -1 * num_bits); + } +out: + mlog_exit(ret); + return ret; +} + +static int update_backups(struct inode * inode, u32 clusters, char *data) +{ + int i, ret = 0; + u32 cluster; + u64 blkno; + struct buffer_head *backup = NULL; + struct ocfs2_dinode *backup_di = NULL; + struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); + + /* calculate the real backups we need to update. */ + for (i = 0; i < OCFS2_MAX_BACKUP_SUPERBLOCKS; i++) { + blkno = ocfs2_backup_super_blkno(inode->i_sb, i); + cluster = ocfs2_blocks_to_clusters(inode->i_sb, blkno); + if (cluster > clusters) + break; + + ret = ocfs2_read_block(osb, blkno, &backup, 0, NULL); + if (ret < 0) { + mlog_errno(ret); + break; + } + + memcpy(backup->b_data, data, inode->i_sb->s_blocksize); + + backup_di = (struct ocfs2_dinode *)backup->b_data; + backup_di->i_blkno = cpu_to_le64(blkno); + + ret = ocfs2_write_super_or_backup(osb, backup); + brelse(backup); + backup = NULL; + if (ret < 0) { + mlog_errno(ret); + break; + } + } + + return ret; +} + +static void ocfs2_update_super_and_backups(struct inode *inode, + int new_clusters) +{ + int ret; + u32 clusters = 0; + struct buffer_head *super_bh = NULL; + struct ocfs2_dinode *super_di = NULL; + struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); + + /* + * update the superblock last. + * It doesn't matter if the write failed. + */ + ret = ocfs2_read_block(osb, OCFS2_SUPER_BLOCK_BLKNO, + &super_bh, 0, NULL); + if (ret < 0) { + mlog_errno(ret); + goto out; + } + + super_di = (struct ocfs2_dinode *)super_bh->b_data; + le32_add_cpu(&super_di->i_clusters, new_clusters); + clusters = le32_to_cpu(super_di->i_clusters); + + ret = ocfs2_write_super_or_backup(osb, super_bh); + if (ret < 0) { + mlog_errno(ret); + goto out; + } + + if (OCFS2_HAS_COMPAT_FEATURE(osb->sb, OCFS2_FEATURE_COMPAT_BACKUP_SB)) + ret = update_backups(inode, clusters, super_bh->b_data); + +out: + if (super_bh) + brelse(super_bh); + if (ret) + printk(KERN_WARNING "ocfs2: Failed to update super blocks on %s" + " during fs resize. This condition is not fatal," + " but fsck.ocfs2 should be run to fix it\n", + osb->dev_str); + return; +} + +/* + * Extend the filesystem to the new number of clusters specified. This entry + * point is only used to extend the current filesystem to the end of the last + * existing group. + */ +int ocfs2_group_extend(struct inode * inode, int new_clusters) +{ + int ret; + handle_t *handle; + struct buffer_head *main_bm_bh = NULL; + struct buffer_head *group_bh = NULL; + struct inode *main_bm_inode = NULL; + struct ocfs2_dinode *fe = NULL; + struct ocfs2_group_desc *group = NULL; + struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); + u16 cl_bpc; + u32 first_new_cluster; + u64 lgd_blkno; + + mlog_entry_void(); + + if (ocfs2_is_hard_readonly(osb) || ocfs2_is_soft_readonly(osb)) + return -EROFS; + + if (new_clusters < 0) + return -EINVAL; + else if (new_clusters == 0) + return 0; + + main_bm_inode = ocfs2_get_system_file_inode(osb, + GLOBAL_BITMAP_SYSTEM_INODE, + OCFS2_INVALID_SLOT); + if (!main_bm_inode) { + ret = -EINVAL; + mlog_errno(ret); + goto out; + } + + mutex_lock(&main_bm_inode->i_mutex); + + ret = ocfs2_inode_lock(main_bm_inode, &main_bm_bh, 1); + if (ret < 0) { + mlog_errno(ret); + goto out_mutex; + } + + fe = (struct ocfs2_dinode *)main_bm_bh->b_data; + + if (le16_to_cpu(fe->id2.i_chain.cl_cpg) != + ocfs2_group_bitmap_size(osb->sb) * 8) { + mlog(ML_ERROR, "The disk is too old and small. " + "Force to do offline resize."); + ret = -EINVAL; + goto out_unlock; + } + + if (!OCFS2_IS_VALID_DINODE(fe)) { + OCFS2_RO_ON_INVALID_DINODE(main_bm_inode->i_sb, fe); + ret = -EIO; + goto out_unlock; + } + + first_new_cluster = le32_to_cpu(fe->i_clusters); + lgd_blkno = ocfs2_which_cluster_group(main_bm_inode, + first_new_cluster - 1); + + ret = ocfs2_read_block(osb, lgd_blkno, &group_bh, OCFS2_BH_CACHED, + main_bm_inode); + if (ret < 0) { + mlog_errno(ret); + goto out_unlock; + } + + group = (struct ocfs2_group_desc *)group_bh->b_data; + + ret = ocfs2_check_group_descriptor(inode->i_sb, fe, group); + if (ret) { + mlog_errno(ret); + goto out_unlock; + } + + cl_bpc = le16_to_cpu(fe->id2.i_chain.cl_bpc); + if (le16_to_cpu(group->bg_bits) / cl_bpc + new_clusters > + le16_to_cpu(fe->id2.i_chain.cl_cpg)) { + ret = -EINVAL; + goto out_unlock; + } + + mlog(0, "extend the last group at %llu, new clusters = %d\n", + le64_to_cpu(group->bg_blkno), new_clusters); + + handle = ocfs2_start_trans(osb, OCFS2_GROUP_EXTEND_CREDITS); + if (IS_ERR(handle)) { + mlog_errno(PTR_ERR(handle)); + ret = -EINVAL; + goto out_unlock; + } + + /* update the last group descriptor and inode. */ + ret = ocfs2_update_last_group_and_inode(handle, main_bm_inode, + main_bm_bh, group_bh, + first_new_cluster, + new_clusters); + if (ret) { + mlog_errno(ret); + goto out_commit; + } + + ocfs2_update_super_and_backups(main_bm_inode, new_clusters); + +out_commit: + ocfs2_commit_trans(osb, handle); +out_unlock: + if (group_bh) + brelse(group_bh); + + if (main_bm_bh) + brelse(main_bm_bh); + + ocfs2_inode_unlock(main_bm_inode, 1); + +out_mutex: + mutex_unlock(&main_bm_inode->i_mutex); + iput(main_bm_inode); + +out: + mlog_exit_void(); + return ret; +} diff --git a/fs/ocfs2/resize.h b/fs/ocfs2/resize.h new file mode 100644 index 000000000000..3acb79af451b --- /dev/null +++ b/fs/ocfs2/resize.h @@ -0,0 +1,31 @@ +/* -*- mode: c; c-basic-offset: 8; -*- + * vim: noexpandtab sw=8 ts=8 sts=0: + * + * resize.h + * + * Function prototypes + * + * Copyright (C) 2007 Oracle. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the + * Free Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 021110-1307, USA. + */ + +#ifndef OCFS2_RESIZE_H +#define OCFS2_RESIZE_H + +int ocfs2_group_extend(struct inode * inode, int new_clusters); + +#endif /* OCFS2_RESIZE_H */ diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c index 6df4dbf67d18..4391744e80f8 100644 --- a/fs/ocfs2/suballoc.c +++ b/fs/ocfs2/suballoc.c @@ -101,8 +101,6 @@ static inline int ocfs2_block_group_reasonably_empty(struct ocfs2_group_desc *bg static inline u32 ocfs2_desc_bitmap_to_cluster_off(struct inode *inode, u64 bg_blkno, u16 bg_bit_off); -static inline u64 ocfs2_which_cluster_group(struct inode *inode, - u32 cluster); static inline void ocfs2_block_to_cluster_group(struct inode *inode, u64 data_blkno, u64 *bg_blkno, @@ -131,9 +129,9 @@ static u32 ocfs2_bits_per_group(struct ocfs2_chain_list *cl) } /* somewhat more expensive than our other checks, so use sparingly. */ -static int ocfs2_check_group_descriptor(struct super_block *sb, - struct ocfs2_dinode *di, - struct ocfs2_group_desc *gd) +int ocfs2_check_group_descriptor(struct super_block *sb, + struct ocfs2_dinode *di, + struct ocfs2_group_desc *gd) { unsigned int max_bits; @@ -1443,8 +1441,7 @@ static inline u32 ocfs2_desc_bitmap_to_cluster_off(struct inode *inode, /* given a cluster offset, calculate which block group it belongs to * and return that block offset. */ -static inline u64 ocfs2_which_cluster_group(struct inode *inode, - u32 cluster) +u64 ocfs2_which_cluster_group(struct inode *inode, u32 cluster) { struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); u32 group_no; diff --git a/fs/ocfs2/suballoc.h b/fs/ocfs2/suballoc.h index cafe93703095..8799033bb459 100644 --- a/fs/ocfs2/suballoc.h +++ b/fs/ocfs2/suballoc.h @@ -147,4 +147,12 @@ static inline int ocfs2_is_cluster_bitmap(struct inode *inode) int ocfs2_reserve_cluster_bitmap_bits(struct ocfs2_super *osb, struct ocfs2_alloc_context *ac); +/* given a cluster offset, calculate which block group it belongs to + * and return that block offset. */ +u64 ocfs2_which_cluster_group(struct inode *inode, u32 cluster); + +/* somewhat more expensive than our other checks, so use sparingly. */ +int ocfs2_check_group_descriptor(struct super_block *sb, + struct ocfs2_dinode *di, + struct ocfs2_group_desc *gd); #endif /* _CHAINALLOC_H_ */ -- cgit v1.2.3-59-g8ed1b From 7909f2bf835376a20d6dbf853eb459a27566eba2 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Tue, 18 Dec 2007 15:47:25 +0800 Subject: [PATCH 2/2] ocfs2: Implement group add for online resize This patch adds the ability for a userspace program to request that a properly formatted cluster group be added to the main allocation bitmap for an Ocfs2 file system. The request is made via an ioctl, OCFS2_IOC_GROUP_ADD. On a high level, this is similar to ext3, but we use a different ioctl as the structure which has to be passed through is different. During an online resize, tunefs.ocfs2 will format any new cluster groups which must be added to complete the resize, and call OCFS2_IOC_GROUP_ADD on each one. Kernel verifies that the core cluster group information is valid and then does the work of linking it into the global allocation bitmap. Signed-off-by: Tao Ma Signed-off-by: Mark Fasheh --- fs/ocfs2/ioctl.c | 9 ++ fs/ocfs2/journal.h | 3 + fs/ocfs2/ocfs2_fs.h | 12 +++ fs/ocfs2/resize.c | 245 +++++++++++++++++++++++++++++++++++++++++++++++++++- fs/ocfs2/resize.h | 1 + 5 files changed, 269 insertions(+), 1 deletion(-) diff --git a/fs/ocfs2/ioctl.c b/fs/ocfs2/ioctl.c index b74b24ecf0e4..7003d5820d79 100644 --- a/fs/ocfs2/ioctl.c +++ b/fs/ocfs2/ioctl.c @@ -119,6 +119,7 @@ int ocfs2_ioctl(struct inode * inode, struct file * filp, int new_clusters; int status; struct ocfs2_space_resv sr; + struct ocfs2_new_group_input input; switch (cmd) { case OCFS2_IOC_GETFLAGS: @@ -147,6 +148,12 @@ int ocfs2_ioctl(struct inode * inode, struct file * filp, return -EFAULT; return ocfs2_group_extend(inode, new_clusters); + case OCFS2_IOC_GROUP_ADD: + case OCFS2_IOC_GROUP_ADD64: + if (copy_from_user(&input, (int __user *) arg, sizeof(input))) + return -EFAULT; + + return ocfs2_group_add(inode, &input); default: return -ENOTTY; } @@ -170,6 +177,8 @@ long ocfs2_compat_ioctl(struct file *file, unsigned cmd, unsigned long arg) case OCFS2_IOC_UNRESVSP: case OCFS2_IOC_UNRESVSP64: case OCFS2_IOC_GROUP_EXTEND: + case OCFS2_IOC_GROUP_ADD: + case OCFS2_IOC_GROUP_ADD64: break; default: return -ENOIOCTLCMD; diff --git a/fs/ocfs2/journal.h b/fs/ocfs2/journal.h index 0ba3a421ccf2..220f3e818e78 100644 --- a/fs/ocfs2/journal.h +++ b/fs/ocfs2/journal.h @@ -281,6 +281,9 @@ int ocfs2_journal_dirty_data(handle_t *handle, /* group extend. inode update and last group update. */ #define OCFS2_GROUP_EXTEND_CREDITS (OCFS2_INODE_UPDATE_CREDITS + 1) +/* group add. inode update and the new group update. */ +#define OCFS2_GROUP_ADD_CREDITS (OCFS2_INODE_UPDATE_CREDITS + 1) + /* get one bit out of a suballocator: dinode + group descriptor + * prev. group desc. if we relink. */ #define OCFS2_SUBALLOC_ALLOC (3) diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h index 19ac421b613b..425551737f1f 100644 --- a/fs/ocfs2/ocfs2_fs.h +++ b/fs/ocfs2/ocfs2_fs.h @@ -231,7 +231,19 @@ struct ocfs2_space_resv { #define OCFS2_IOC_RESVSP64 _IOW ('X', 42, struct ocfs2_space_resv) #define OCFS2_IOC_UNRESVSP64 _IOW ('X', 43, struct ocfs2_space_resv) +/* Used to pass group descriptor data when online resize is done */ +struct ocfs2_new_group_input { + __u64 group; /* Group descriptor's blkno. */ + __u32 clusters; /* Total number of clusters in this group */ + __u32 frees; /* Total free clusters in this group */ + __u16 chain; /* Chain for this group */ + __u16 reserved1; + __u32 reserved2; +}; + #define OCFS2_IOC_GROUP_EXTEND _IOW('o', 1, int) +#define OCFS2_IOC_GROUP_ADD _IOW('o', 2,struct ocfs2_new_group_input) +#define OCFS2_IOC_GROUP_ADD64 _IOW('o', 3,struct ocfs2_new_group_input) /* * Journal Flags (ocfs2_dinode.id1.journal1.i_flags) diff --git a/fs/ocfs2/resize.c b/fs/ocfs2/resize.c index 848f7293f4fc..7791309bb258 100644 --- a/fs/ocfs2/resize.c +++ b/fs/ocfs2/resize.c @@ -356,7 +356,7 @@ int ocfs2_group_extend(struct inode * inode, int new_clusters) } mlog(0, "extend the last group at %llu, new clusters = %d\n", - le64_to_cpu(group->bg_blkno), new_clusters); + (unsigned long long)le64_to_cpu(group->bg_blkno), new_clusters); handle = ocfs2_start_trans(osb, OCFS2_GROUP_EXTEND_CREDITS); if (IS_ERR(handle)) { @@ -396,3 +396,246 @@ out: mlog_exit_void(); return ret; } + +static int ocfs2_check_new_group(struct inode *inode, + struct ocfs2_dinode *di, + struct ocfs2_new_group_input *input, + struct buffer_head *group_bh) +{ + int ret; + struct ocfs2_group_desc *gd; + u16 cl_bpc = le16_to_cpu(di->id2.i_chain.cl_bpc); + unsigned int max_bits = le16_to_cpu(di->id2.i_chain.cl_cpg) * + le16_to_cpu(di->id2.i_chain.cl_bpc); + + + gd = (struct ocfs2_group_desc *)group_bh->b_data; + + ret = -EIO; + if (!OCFS2_IS_VALID_GROUP_DESC(gd)) + mlog(ML_ERROR, "Group descriptor # %llu isn't valid.\n", + (unsigned long long)le64_to_cpu(gd->bg_blkno)); + else if (di->i_blkno != gd->bg_parent_dinode) + mlog(ML_ERROR, "Group descriptor # %llu has bad parent " + "pointer (%llu, expected %llu)\n", + (unsigned long long)le64_to_cpu(gd->bg_blkno), + (unsigned long long)le64_to_cpu(gd->bg_parent_dinode), + (unsigned long long)le64_to_cpu(di->i_blkno)); + else if (le16_to_cpu(gd->bg_bits) > max_bits) + mlog(ML_ERROR, "Group descriptor # %llu has bit count of %u\n", + (unsigned long long)le64_to_cpu(gd->bg_blkno), + le16_to_cpu(gd->bg_bits)); + else if (le16_to_cpu(gd->bg_free_bits_count) > le16_to_cpu(gd->bg_bits)) + mlog(ML_ERROR, "Group descriptor # %llu has bit count %u but " + "claims that %u are free\n", + (unsigned long long)le64_to_cpu(gd->bg_blkno), + le16_to_cpu(gd->bg_bits), + le16_to_cpu(gd->bg_free_bits_count)); + else if (le16_to_cpu(gd->bg_bits) > (8 * le16_to_cpu(gd->bg_size))) + mlog(ML_ERROR, "Group descriptor # %llu has bit count %u but " + "max bitmap bits of %u\n", + (unsigned long long)le64_to_cpu(gd->bg_blkno), + le16_to_cpu(gd->bg_bits), + 8 * le16_to_cpu(gd->bg_size)); + else if (le16_to_cpu(gd->bg_chain) != input->chain) + mlog(ML_ERROR, "Group descriptor # %llu has bad chain %u " + "while input has %u set.\n", + (unsigned long long)le64_to_cpu(gd->bg_blkno), + le16_to_cpu(gd->bg_chain), input->chain); + else if (le16_to_cpu(gd->bg_bits) != input->clusters * cl_bpc) + mlog(ML_ERROR, "Group descriptor # %llu has bit count %u but " + "input has %u clusters set\n", + (unsigned long long)le64_to_cpu(gd->bg_blkno), + le16_to_cpu(gd->bg_bits), input->clusters); + else if (le16_to_cpu(gd->bg_free_bits_count) != input->frees * cl_bpc) + mlog(ML_ERROR, "Group descriptor # %llu has free bit count %u " + "but it should have %u set\n", + (unsigned long long)le64_to_cpu(gd->bg_blkno), + le16_to_cpu(gd->bg_bits), + input->frees * cl_bpc); + else + ret = 0; + + return ret; +} + +static int ocfs2_verify_group_and_input(struct inode *inode, + struct ocfs2_dinode *di, + struct ocfs2_new_group_input *input, + struct buffer_head *group_bh) +{ + u16 cl_count = le16_to_cpu(di->id2.i_chain.cl_count); + u16 cl_cpg = le16_to_cpu(di->id2.i_chain.cl_cpg); + u16 next_free = le16_to_cpu(di->id2.i_chain.cl_next_free_rec); + u32 cluster = ocfs2_blocks_to_clusters(inode->i_sb, input->group); + u32 total_clusters = le32_to_cpu(di->i_clusters); + int ret = -EINVAL; + + if (cluster < total_clusters) + mlog(ML_ERROR, "add a group which is in the current volume.\n"); + else if (input->chain >= cl_count) + mlog(ML_ERROR, "input chain exceeds the limit.\n"); + else if (next_free != cl_count && next_free != input->chain) + mlog(ML_ERROR, + "the add group should be in chain %u\n", next_free); + else if (total_clusters + input->clusters < total_clusters) + mlog(ML_ERROR, "add group's clusters overflow.\n"); + else if (input->clusters > cl_cpg) + mlog(ML_ERROR, "the cluster exceeds the maximum of a group\n"); + else if (input->frees > input->clusters) + mlog(ML_ERROR, "the free cluster exceeds the total clusters\n"); + else if (total_clusters % cl_cpg != 0) + mlog(ML_ERROR, + "the last group isn't full. Use group extend first.\n"); + else if (input->group != ocfs2_which_cluster_group(inode, cluster)) + mlog(ML_ERROR, "group blkno is invalid\n"); + else if ((ret = ocfs2_check_new_group(inode, di, input, group_bh))) + mlog(ML_ERROR, "group descriptor check failed.\n"); + else + ret = 0; + + return ret; +} + +/* Add a new group descriptor to global_bitmap. */ +int ocfs2_group_add(struct inode *inode, struct ocfs2_new_group_input *input) +{ + int ret; + handle_t *handle; + struct buffer_head *main_bm_bh = NULL; + struct inode *main_bm_inode = NULL; + struct ocfs2_dinode *fe = NULL; + struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); + struct buffer_head *group_bh = NULL; + struct ocfs2_group_desc *group = NULL; + struct ocfs2_chain_list *cl; + struct ocfs2_chain_rec *cr; + u16 cl_bpc; + + mlog_entry_void(); + + if (ocfs2_is_hard_readonly(osb) || ocfs2_is_soft_readonly(osb)) + return -EROFS; + + main_bm_inode = ocfs2_get_system_file_inode(osb, + GLOBAL_BITMAP_SYSTEM_INODE, + OCFS2_INVALID_SLOT); + if (!main_bm_inode) { + ret = -EINVAL; + mlog_errno(ret); + goto out; + } + + mutex_lock(&main_bm_inode->i_mutex); + + ret = ocfs2_inode_lock(main_bm_inode, &main_bm_bh, 1); + if (ret < 0) { + mlog_errno(ret); + goto out_mutex; + } + + fe = (struct ocfs2_dinode *)main_bm_bh->b_data; + + if (le16_to_cpu(fe->id2.i_chain.cl_cpg) != + ocfs2_group_bitmap_size(osb->sb) * 8) { + mlog(ML_ERROR, "The disk is too old and small." + " Force to do offline resize."); + ret = -EINVAL; + goto out_unlock; + } + + ret = ocfs2_read_block(osb, input->group, &group_bh, 0, NULL); + if (ret < 0) { + mlog(ML_ERROR, "Can't read the group descriptor # %llu " + "from the device.", (unsigned long long)input->group); + goto out_unlock; + } + + ocfs2_set_new_buffer_uptodate(inode, group_bh); + + ret = ocfs2_verify_group_and_input(main_bm_inode, fe, input, group_bh); + if (ret) { + mlog_errno(ret); + goto out_unlock; + } + + mlog(0, "Add a new group %llu in chain = %u, length = %u\n", + (unsigned long long)input->group, input->chain, input->clusters); + + handle = ocfs2_start_trans(osb, OCFS2_GROUP_ADD_CREDITS); + if (IS_ERR(handle)) { + mlog_errno(PTR_ERR(handle)); + ret = -EINVAL; + goto out_unlock; + } + + cl_bpc = le16_to_cpu(fe->id2.i_chain.cl_bpc); + cl = &fe->id2.i_chain; + cr = &cl->cl_recs[input->chain]; + + ret = ocfs2_journal_access(handle, main_bm_inode, group_bh, + OCFS2_JOURNAL_ACCESS_WRITE); + if (ret < 0) { + mlog_errno(ret); + goto out_commit; + } + + group = (struct ocfs2_group_desc *)group_bh->b_data; + group->bg_next_group = cr->c_blkno; + + ret = ocfs2_journal_dirty(handle, group_bh); + if (ret < 0) { + mlog_errno(ret); + goto out_commit; + } + + ret = ocfs2_journal_access(handle, main_bm_inode, main_bm_bh, + OCFS2_JOURNAL_ACCESS_WRITE); + if (ret < 0) { + mlog_errno(ret); + goto out_commit; + } + + if (input->chain == le16_to_cpu(cl->cl_next_free_rec)) { + le16_add_cpu(&cl->cl_next_free_rec, 1); + memset(cr, 0, sizeof(struct ocfs2_chain_rec)); + } + + cr->c_blkno = le64_to_cpu(input->group); + le32_add_cpu(&cr->c_total, input->clusters * cl_bpc); + le32_add_cpu(&cr->c_free, input->frees * cl_bpc); + + le32_add_cpu(&fe->id1.bitmap1.i_total, input->clusters *cl_bpc); + le32_add_cpu(&fe->id1.bitmap1.i_used, + (input->clusters - input->frees) * cl_bpc); + le32_add_cpu(&fe->i_clusters, input->clusters); + + ocfs2_journal_dirty(handle, main_bm_bh); + + spin_lock(&OCFS2_I(main_bm_inode)->ip_lock); + OCFS2_I(main_bm_inode)->ip_clusters = le32_to_cpu(fe->i_clusters); + le64_add_cpu(&fe->i_size, input->clusters << osb->s_clustersize_bits); + spin_unlock(&OCFS2_I(main_bm_inode)->ip_lock); + i_size_write(main_bm_inode, le64_to_cpu(fe->i_size)); + + ocfs2_update_super_and_backups(main_bm_inode, input->clusters); + +out_commit: + ocfs2_commit_trans(osb, handle); +out_unlock: + if (group_bh) + brelse(group_bh); + + if (main_bm_bh) + brelse(main_bm_bh); + + ocfs2_inode_unlock(main_bm_inode, 1); + +out_mutex: + mutex_unlock(&main_bm_inode->i_mutex); + iput(main_bm_inode); + +out: + mlog_exit_void(); + return ret; +} diff --git a/fs/ocfs2/resize.h b/fs/ocfs2/resize.h index 3acb79af451b..f38841abf10b 100644 --- a/fs/ocfs2/resize.h +++ b/fs/ocfs2/resize.h @@ -27,5 +27,6 @@ #define OCFS2_RESIZE_H int ocfs2_group_extend(struct inode * inode, int new_clusters); +int ocfs2_group_add(struct inode *inode, struct ocfs2_new_group_input *input); #endif /* OCFS2_RESIZE_H */ -- cgit v1.2.3-59-g8ed1b From 0957f00796157564281ea6ff2cea7ef4f897775a Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Tue, 18 Dec 2007 18:58:18 -0800 Subject: ocfs2: Add missing permission checks Check that an online resize is being driven by a user with permission to change system resource limits. Signed-off-by: Mark Fasheh --- fs/ocfs2/ioctl.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/ocfs2/ioctl.c b/fs/ocfs2/ioctl.c index 7003d5820d79..5177fba5162b 100644 --- a/fs/ocfs2/ioctl.c +++ b/fs/ocfs2/ioctl.c @@ -144,12 +144,18 @@ int ocfs2_ioctl(struct inode * inode, struct file * filp, return ocfs2_change_file_space(filp, cmd, &sr); case OCFS2_IOC_GROUP_EXTEND: + if (!capable(CAP_SYS_RESOURCE)) + return -EPERM; + if (get_user(new_clusters, (int __user *)arg)) return -EFAULT; return ocfs2_group_extend(inode, new_clusters); case OCFS2_IOC_GROUP_ADD: case OCFS2_IOC_GROUP_ADD64: + if (!capable(CAP_SYS_RESOURCE)) + return -EPERM; + if (copy_from_user(&input, (int __user *) arg, sizeof(input))) return -EFAULT; -- cgit v1.2.3-59-g8ed1b From d147b3d630edef1d34de6ea819787a1ac1b8603b Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Wed, 7 Nov 2007 14:40:36 -0800 Subject: ocfs2: Support commit= mount option Mostly taken from ext3. This allows the user to set the jbd commit interval, in seconds. The default of 5 seconds stays the same, but now users can easily increase the commit interval. Typically, this would be increased in order to benefit performance at the expense of data-safety. Signed-off-by: Mark Fasheh --- Documentation/filesystems/ocfs2.txt | 11 +++++++++++ fs/ocfs2/journal.c | 8 ++++++-- fs/ocfs2/ocfs2.h | 1 + fs/ocfs2/super.c | 23 +++++++++++++++++++++++ 4 files changed, 41 insertions(+), 2 deletions(-) diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt index e78abdcc59ee..b63bd2d7fcd3 100644 --- a/Documentation/filesystems/ocfs2.txt +++ b/Documentation/filesystems/ocfs2.txt @@ -61,3 +61,14 @@ data=writeback Data ordering is not preserved, data may be written preferred_slot=0(*) During mount, try to use this filesystem slot first. If it is in use by another node, the first empty one found will be chosen. Invalid values will be ignored. +commit=nrsec (*) Ocfs2 can be told to sync all its data and metadata + every 'nrsec' seconds. The default value is 5 seconds. + This means that if you lose your power, you will lose + as much as the latest 5 seconds of work (your + filesystem will not be damaged though, thanks to the + journaling). This default value (or any low value) + will hurt performance, but it's good for data-safety. + Setting it to 0 will have the same effect as leaving + it at the default (5 seconds). + Setting it to very large values will improve + performance. diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c index 4f440a88bf53..8b9ce2a729ab 100644 --- a/fs/ocfs2/journal.c +++ b/fs/ocfs2/journal.c @@ -313,14 +313,18 @@ int ocfs2_journal_dirty_data(handle_t *handle, return err; } -#define OCFS2_DEFAULT_COMMIT_INTERVAL (HZ * 5) +#define OCFS2_DEFAULT_COMMIT_INTERVAL (HZ * JBD_DEFAULT_MAX_COMMIT_AGE) void ocfs2_set_journal_params(struct ocfs2_super *osb) { journal_t *journal = osb->journal->j_journal; + unsigned long commit_interval = OCFS2_DEFAULT_COMMIT_INTERVAL; + + if (osb->osb_commit_interval) + commit_interval = osb->osb_commit_interval; spin_lock(&journal->j_state_lock); - journal->j_commit_interval = OCFS2_DEFAULT_COMMIT_INTERVAL; + journal->j_commit_interval = commit_interval; if (osb->s_mount_opt & OCFS2_MOUNT_BARRIER) journal->j_flags |= JFS_BARRIER; else diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h index f8f866144c6a..82802f5672a1 100644 --- a/fs/ocfs2/ocfs2.h +++ b/fs/ocfs2/ocfs2.h @@ -229,6 +229,7 @@ struct ocfs2_super wait_queue_head_t checkpoint_event; atomic_t needs_checkpoint; struct ocfs2_journal *journal; + unsigned long osb_commit_interval; enum ocfs2_local_alloc_state local_alloc_state; struct buffer_head *local_alloc_bh; diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index 479ac50c86d9..8044ed97d362 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -83,6 +83,7 @@ MODULE_LICENSE("GPL"); struct mount_options { + unsigned long commit_interval; unsigned long mount_opt; unsigned int atime_quantum; signed short slot; @@ -149,6 +150,7 @@ enum { Opt_data_writeback, Opt_atime_quantum, Opt_slot, + Opt_commit, Opt_err, }; @@ -164,6 +166,7 @@ static match_table_t tokens = { {Opt_data_writeback, "data=writeback"}, {Opt_atime_quantum, "atime_quantum=%u"}, {Opt_slot, "preferred_slot=%u"}, + {Opt_commit, "commit=%u"}, {Opt_err, NULL} }; @@ -442,6 +445,8 @@ unlock_osb: osb->s_mount_opt = parsed_options.mount_opt; osb->s_atime_quantum = parsed_options.atime_quantum; osb->preferred_slot = parsed_options.slot; + if (parsed_options.commit_interval) + osb->osb_commit_interval = parsed_options.commit_interval; if (!ocfs2_is_hard_readonly(osb)) ocfs2_set_journal_params(osb); @@ -596,6 +601,7 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent) osb->s_mount_opt = parsed_options.mount_opt; osb->s_atime_quantum = parsed_options.atime_quantum; osb->preferred_slot = parsed_options.slot; + osb->osb_commit_interval = parsed_options.commit_interval; sb->s_magic = OCFS2_SUPER_MAGIC; @@ -746,6 +752,7 @@ static int ocfs2_parse_options(struct super_block *sb, mlog_entry("remount: %d, options: \"%s\"\n", is_remount, options ? options : "(none)"); + mopt->commit_interval = 0; mopt->mount_opt = 0; mopt->atime_quantum = OCFS2_DEFAULT_ATIME_QUANTUM; mopt->slot = OCFS2_INVALID_SLOT; @@ -815,6 +822,18 @@ static int ocfs2_parse_options(struct super_block *sb, if (option) mopt->slot = (s16)option; break; + case Opt_commit: + option = 0; + if (match_int(&args[0], &option)) { + status = 0; + goto bail; + } + if (option < 0) + return 0; + if (option == 0) + option = JBD_DEFAULT_MAX_COMMIT_AGE; + mopt->commit_interval = HZ * option; + break; default: mlog(ML_ERROR, "Unrecognized mount option \"%s\" " @@ -863,6 +882,10 @@ static int ocfs2_show_options(struct seq_file *s, struct vfsmount *mnt) if (osb->s_atime_quantum != OCFS2_DEFAULT_ATIME_QUANTUM) seq_printf(s, ",atime_quantum=%u", osb->s_atime_quantum); + if (osb->osb_commit_interval) + seq_printf(s, ",commit=%u", + (unsigned) (osb->osb_commit_interval / HZ)); + return 0; } -- cgit v1.2.3-59-g8ed1b From 2fbe8d1ebe004425b4f7b8bba345623d2280be82 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Thu, 20 Dec 2007 14:58:11 -0800 Subject: ocfs2: Local alloc window size changeable via mount option Local alloc is a performance optimization in ocfs2 in which a node takes a window of bits from the global bitmap and then uses that for all small local allocations. This window size is fixed to 8MB currently. This patch allows users to specify the window size in MB including disabling it by passing in 0. If the number specified is too large, the fs will use the default value of 8MB. mount -o localalloc=X /dev/sdX /mntpoint Signed-off-by: Sunil Mushran Signed-off-by: Mark Fasheh --- Documentation/filesystems/ocfs2.txt | 3 +++ fs/ocfs2/localalloc.c | 42 ++++++++++++++++++++++++++----------- fs/ocfs2/ocfs2.h | 1 + fs/ocfs2/ocfs2_fs.h | 8 +++++++ fs/ocfs2/suballoc.c | 5 +++-- fs/ocfs2/super.c | 17 +++++++++++++++ 6 files changed, 62 insertions(+), 14 deletions(-) diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt index b63bd2d7fcd3..071fad137eb5 100644 --- a/Documentation/filesystems/ocfs2.txt +++ b/Documentation/filesystems/ocfs2.txt @@ -72,3 +72,6 @@ commit=nrsec (*) Ocfs2 can be told to sync all its data and metadata it at the default (5 seconds). Setting it to very large values will improve performance. +localalloc=8(*) Allows custom localalloc size in MB. If the value is too + large, the fs will silently revert it to the default. + Localalloc is not enabled for local mounts. diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c index 0de0792fce7f..add1ffdc5c6c 100644 --- a/fs/ocfs2/localalloc.c +++ b/fs/ocfs2/localalloc.c @@ -75,18 +75,12 @@ static int ocfs2_local_alloc_new_window(struct ocfs2_super *osb, static int ocfs2_local_alloc_slide_window(struct ocfs2_super *osb, struct inode *local_alloc_inode); -/* - * Determine how large our local alloc window should be, in bits. - * - * These values (and the behavior in ocfs2_alloc_should_use_local) have - * been chosen so that most allocations, including new block groups go - * through local alloc. - */ static inline int ocfs2_local_alloc_window_bits(struct ocfs2_super *osb) { - BUG_ON(osb->s_clustersize_bits < 12); + BUG_ON(osb->s_clustersize_bits > 20); - return 2048 >> (osb->s_clustersize_bits - 12); + /* Size local alloc windows by the megabyte */ + return osb->local_alloc_size << (20 - osb->s_clustersize_bits); } /* @@ -96,18 +90,23 @@ static inline int ocfs2_local_alloc_window_bits(struct ocfs2_super *osb) int ocfs2_alloc_should_use_local(struct ocfs2_super *osb, u64 bits) { int la_bits = ocfs2_local_alloc_window_bits(osb); + int ret = 0; if (osb->local_alloc_state != OCFS2_LA_ENABLED) - return 0; + goto bail; /* la_bits should be at least twice the size (in clusters) of * a new block group. We want to be sure block group * allocations go through the local alloc, so allow an * allocation to take up to half the bitmap. */ if (bits > (la_bits / 2)) - return 0; + goto bail; - return 1; + ret = 1; +bail: + mlog(0, "state=%d, bits=%llu, la_bits=%d, ret=%d\n", + osb->local_alloc_state, (unsigned long long)bits, la_bits, ret); + return ret; } int ocfs2_load_local_alloc(struct ocfs2_super *osb) @@ -121,6 +120,19 @@ int ocfs2_load_local_alloc(struct ocfs2_super *osb) mlog_entry_void(); + if (ocfs2_mount_local(osb)) + goto bail; + + if (osb->local_alloc_size == 0) + goto bail; + + if (ocfs2_local_alloc_window_bits(osb) >= osb->bitmap_cpg) { + mlog(ML_NOTICE, "Requested local alloc window %d is larger " + "than max possible %u. Using defaults.\n", + ocfs2_local_alloc_window_bits(osb), (osb->bitmap_cpg - 1)); + osb->local_alloc_size = OCFS2_DEFAULT_LOCAL_ALLOC_SIZE; + } + /* read the alloc off disk */ inode = ocfs2_get_system_file_inode(osb, LOCAL_ALLOC_SYSTEM_INODE, osb->slot_num); @@ -181,6 +193,9 @@ bail: if (inode) iput(inode); + mlog(0, "Local alloc window bits = %d\n", + ocfs2_local_alloc_window_bits(osb)); + mlog_exit(status); return status; } @@ -521,6 +536,9 @@ bail: iput(local_alloc_inode); } + mlog(0, "bits=%d, slot=%d, ret=%d\n", bits_wanted, osb->slot_num, + status); + mlog_exit(status); return status; } diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h index 82802f5672a1..d12bd7036da7 100644 --- a/fs/ocfs2/ocfs2.h +++ b/fs/ocfs2/ocfs2.h @@ -231,6 +231,7 @@ struct ocfs2_super struct ocfs2_journal *journal; unsigned long osb_commit_interval; + int local_alloc_size; enum ocfs2_local_alloc_state local_alloc_state; struct buffer_head *local_alloc_bh; u64 la_last_gd; diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h index 425551737f1f..3633edd3982f 100644 --- a/fs/ocfs2/ocfs2_fs.h +++ b/fs/ocfs2/ocfs2_fs.h @@ -270,6 +270,14 @@ struct ocfs2_new_group_input { /* Journal limits (in bytes) */ #define OCFS2_MIN_JOURNAL_SIZE (4 * 1024 * 1024) +/* + * Default local alloc size (in megabytes) + * + * The value chosen should be such that most allocations, including new + * block groups, use local alloc. + */ +#define OCFS2_DEFAULT_LOCAL_ALLOC_SIZE 8 + struct ocfs2_system_inode_info { char *si_name; int si_iflags; diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c index 4391744e80f8..7e397e2c25dd 100644 --- a/fs/ocfs2/suballoc.c +++ b/fs/ocfs2/suballoc.c @@ -1516,8 +1516,9 @@ int __ocfs2_claim_clusters(struct ocfs2_super *osb, if (min_clusters > (osb->bitmap_cpg - 1)) { /* The only paths asking for contiguousness * should know about this already. */ - mlog(ML_ERROR, "minimum allocation requested exceeds " - "group bitmap size!"); + mlog(ML_ERROR, "minimum allocation requested %u exceeds " + "group bitmap size %u!\n", min_clusters, + osb->bitmap_cpg); status = -ENOSPC; goto bail; } diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index 8044ed97d362..1104f14c3183 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -87,6 +87,7 @@ struct mount_options unsigned long mount_opt; unsigned int atime_quantum; signed short slot; + unsigned int localalloc_opt; }; static int ocfs2_parse_options(struct super_block *sb, char *options, @@ -151,6 +152,7 @@ enum { Opt_atime_quantum, Opt_slot, Opt_commit, + Opt_localalloc, Opt_err, }; @@ -167,6 +169,7 @@ static match_table_t tokens = { {Opt_atime_quantum, "atime_quantum=%u"}, {Opt_slot, "preferred_slot=%u"}, {Opt_commit, "commit=%u"}, + {Opt_localalloc, "localalloc=%d"}, {Opt_err, NULL} }; @@ -602,6 +605,7 @@ static int ocfs2_fill_super(struct super_block *sb, void *data, int silent) osb->s_atime_quantum = parsed_options.atime_quantum; osb->preferred_slot = parsed_options.slot; osb->osb_commit_interval = parsed_options.commit_interval; + osb->local_alloc_size = parsed_options.localalloc_opt; sb->s_magic = OCFS2_SUPER_MAGIC; @@ -756,6 +760,7 @@ static int ocfs2_parse_options(struct super_block *sb, mopt->mount_opt = 0; mopt->atime_quantum = OCFS2_DEFAULT_ATIME_QUANTUM; mopt->slot = OCFS2_INVALID_SLOT; + mopt->localalloc_opt = OCFS2_DEFAULT_LOCAL_ALLOC_SIZE; if (!options) { status = 1; @@ -834,6 +839,15 @@ static int ocfs2_parse_options(struct super_block *sb, option = JBD_DEFAULT_MAX_COMMIT_AGE; mopt->commit_interval = HZ * option; break; + case Opt_localalloc: + option = 0; + if (match_int(&args[0], &option)) { + status = 0; + goto bail; + } + if (option >= 0 && (option <= ocfs2_local_alloc_size(sb) * 8)) + mopt->localalloc_opt = option; + break; default: mlog(ML_ERROR, "Unrecognized mount option \"%s\" " @@ -886,6 +900,9 @@ static int ocfs2_show_options(struct seq_file *s, struct vfsmount *mnt) seq_printf(s, ",commit=%u", (unsigned) (osb->osb_commit_interval / HZ)); + if (osb->local_alloc_size != OCFS2_DEFAULT_LOCAL_ALLOC_SIZE) + seq_printf(s, ",localalloc=%d", osb->local_alloc_size); + return 0; } -- cgit v1.2.3-59-g8ed1b From cf8e06f1a860d8680d6bb4ac8ec7d7724988e46f Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Thu, 20 Dec 2007 16:43:10 -0800 Subject: [PATCH 1/2] ocfs2: add flock lock type This adds a new dlmglue lock type which is intended to back flock() requests. Since these locks are driven from userspace, usage rules are much more liberal than the typical Ocfs2 internal cluster lock. As a result, we can't make use of most dlmglue features - lock caching and lock level optimizations in particular. Additionally, userspace is free to deadlock itself, so we have to deal with that in the same way as the rest of the kernel - by allowing a signal to abort a lock request. In order to keep ocfs2_cluster_lock() complexity down, ocfs2_file_lock() does it's own dlm coordination. We still use the same helper functions though, so duplicated code is kept to a minimum. Signed-off-by: Mark Fasheh --- fs/ocfs2/dlmglue.c | 267 ++++++++++++++++++++++++++++++++++++++++++++++++ fs/ocfs2/dlmglue.h | 5 + fs/ocfs2/file.h | 6 ++ fs/ocfs2/ocfs2.h | 1 + fs/ocfs2/ocfs2_lockid.h | 5 + 5 files changed, 284 insertions(+) diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index fa5e3bdc295d..3867244fb144 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -68,6 +68,7 @@ struct ocfs2_mask_waiter { static struct ocfs2_super *ocfs2_get_dentry_osb(struct ocfs2_lock_res *lockres); static struct ocfs2_super *ocfs2_get_inode_osb(struct ocfs2_lock_res *lockres); +static struct ocfs2_super *ocfs2_get_file_osb(struct ocfs2_lock_res *lockres); /* * Return value from ->downconvert_worker functions. @@ -252,6 +253,11 @@ static struct ocfs2_lock_res_ops ocfs2_inode_open_lops = { .flags = 0, }; +static struct ocfs2_lock_res_ops ocfs2_flock_lops = { + .get_osb = ocfs2_get_file_osb, + .flags = 0, +}; + static inline int ocfs2_is_inode_lock(struct ocfs2_lock_res *lockres) { return lockres->l_type == OCFS2_LOCK_TYPE_META || @@ -310,6 +316,17 @@ static int ocfs2_inode_lock_update(struct inode *inode, struct buffer_head **bh); static void ocfs2_drop_osb_locks(struct ocfs2_super *osb); static inline int ocfs2_highest_compat_lock_level(int level); +static void ocfs2_prepare_downconvert(struct ocfs2_lock_res *lockres, + int new_level); +static int ocfs2_downconvert_lock(struct ocfs2_super *osb, + struct ocfs2_lock_res *lockres, + int new_level, + int lvb); +static int ocfs2_prepare_cancel_convert(struct ocfs2_super *osb, + struct ocfs2_lock_res *lockres); +static int ocfs2_cancel_convert(struct ocfs2_super *osb, + struct ocfs2_lock_res *lockres); + static void ocfs2_build_lock_name(enum ocfs2_lock_type type, u64 blkno, @@ -419,6 +436,13 @@ static struct ocfs2_super *ocfs2_get_inode_osb(struct ocfs2_lock_res *lockres) return OCFS2_SB(inode->i_sb); } +static struct ocfs2_super *ocfs2_get_file_osb(struct ocfs2_lock_res *lockres) +{ + struct ocfs2_file_private *fp = lockres->l_priv; + + return OCFS2_SB(fp->fp_file->f_mapping->host->i_sb); +} + static __u64 ocfs2_get_dentry_lock_ino(struct ocfs2_lock_res *lockres) { __be64 inode_blkno_be; @@ -499,6 +523,21 @@ static void ocfs2_rename_lock_res_init(struct ocfs2_lock_res *res, &ocfs2_rename_lops, osb); } +void ocfs2_file_lock_res_init(struct ocfs2_lock_res *lockres, + struct ocfs2_file_private *fp) +{ + struct inode *inode = fp->fp_file->f_mapping->host; + struct ocfs2_inode_info *oi = OCFS2_I(inode); + + ocfs2_lock_res_init_once(lockres); + ocfs2_build_lock_name(OCFS2_LOCK_TYPE_FLOCK, oi->ip_blkno, + inode->i_generation, lockres->l_name); + ocfs2_lock_res_init_common(OCFS2_SB(inode->i_sb), lockres, + OCFS2_LOCK_TYPE_FLOCK, &ocfs2_flock_lops, + fp); + lockres->l_flags |= OCFS2_LOCK_NOCACHE; +} + void ocfs2_lock_res_free(struct ocfs2_lock_res *res) { mlog_entry_void(); @@ -715,6 +754,13 @@ static void ocfs2_blocking_ast(void *opaque, int level) lockres->l_name, level, lockres->l_level, ocfs2_lock_type_string(lockres->l_type)); + /* + * We can skip the bast for locks which don't enable caching - + * they'll be dropped at the earliest possible time anyway. + */ + if (lockres->l_flags & OCFS2_LOCK_NOCACHE) + return; + spin_lock_irqsave(&lockres->l_lock, flags); needs_downconvert = ocfs2_generic_handle_bast(lockres, level); if (needs_downconvert) @@ -926,6 +972,21 @@ static int lockres_remove_mask_waiter(struct ocfs2_lock_res *lockres, } +static int ocfs2_wait_for_mask_interruptible(struct ocfs2_mask_waiter *mw, + struct ocfs2_lock_res *lockres) +{ + int ret; + + ret = wait_for_completion_interruptible(&mw->mw_complete); + if (ret) + lockres_remove_mask_waiter(lockres, mw); + else + ret = mw->mw_status; + /* Re-arm the completion in case we want to wait on it again */ + INIT_COMPLETION(mw->mw_complete); + return ret; +} + static int ocfs2_cluster_lock(struct ocfs2_super *osb, struct ocfs2_lock_res *lockres, int level, @@ -1296,6 +1357,212 @@ out: mlog_exit_void(); } +static int ocfs2_flock_handle_signal(struct ocfs2_lock_res *lockres, + int level) +{ + int ret; + struct ocfs2_super *osb = ocfs2_get_lockres_osb(lockres); + unsigned long flags; + struct ocfs2_mask_waiter mw; + + ocfs2_init_mask_waiter(&mw); + +retry_cancel: + spin_lock_irqsave(&lockres->l_lock, flags); + if (lockres->l_flags & OCFS2_LOCK_BUSY) { + ret = ocfs2_prepare_cancel_convert(osb, lockres); + if (ret) { + spin_unlock_irqrestore(&lockres->l_lock, flags); + ret = ocfs2_cancel_convert(osb, lockres); + if (ret < 0) { + mlog_errno(ret); + goto out; + } + goto retry_cancel; + } + lockres_add_mask_waiter(lockres, &mw, OCFS2_LOCK_BUSY, 0); + spin_unlock_irqrestore(&lockres->l_lock, flags); + + ocfs2_wait_for_mask(&mw); + goto retry_cancel; + } + + ret = -ERESTARTSYS; + /* + * We may still have gotten the lock, in which case there's no + * point to restarting the syscall. + */ + if (lockres->l_level == level) + ret = 0; + + mlog(0, "Cancel returning %d. flags: 0x%lx, level: %d, act: %d\n", ret, + lockres->l_flags, lockres->l_level, lockres->l_action); + + spin_unlock_irqrestore(&lockres->l_lock, flags); + +out: + return ret; +} + +/* + * ocfs2_file_lock() and ocfs2_file_unlock() map to a single pair of + * flock() calls. The locking approach this requires is sufficiently + * different from all other cluster lock types that we implement a + * seperate path to the "low-level" dlm calls. In particular: + * + * - No optimization of lock levels is done - we take at exactly + * what's been requested. + * + * - No lock caching is employed. We immediately downconvert to + * no-lock at unlock time. This also means flock locks never go on + * the blocking list). + * + * - Since userspace can trivially deadlock itself with flock, we make + * sure to allow cancellation of a misbehaving applications flock() + * request. + * + * - Access to any flock lockres doesn't require concurrency, so we + * can simplify the code by requiring the caller to guarantee + * serialization of dlmglue flock calls. + */ +int ocfs2_file_lock(struct file *file, int ex, int trylock) +{ + int ret, level = ex ? LKM_EXMODE : LKM_PRMODE; + unsigned int lkm_flags = trylock ? LKM_NOQUEUE : 0; + unsigned long flags; + struct ocfs2_file_private *fp = file->private_data; + struct ocfs2_lock_res *lockres = &fp->fp_flock; + struct ocfs2_super *osb = OCFS2_SB(file->f_mapping->host->i_sb); + struct ocfs2_mask_waiter mw; + + ocfs2_init_mask_waiter(&mw); + + if ((lockres->l_flags & OCFS2_LOCK_BUSY) || + (lockres->l_level > LKM_NLMODE)) { + mlog(ML_ERROR, + "File lock \"%s\" has busy or locked state: flags: 0x%lx, " + "level: %u\n", lockres->l_name, lockres->l_flags, + lockres->l_level); + return -EINVAL; + } + + spin_lock_irqsave(&lockres->l_lock, flags); + if (!(lockres->l_flags & OCFS2_LOCK_ATTACHED)) { + lockres_add_mask_waiter(lockres, &mw, OCFS2_LOCK_BUSY, 0); + spin_unlock_irqrestore(&lockres->l_lock, flags); + + /* + * Get the lock at NLMODE to start - that way we + * can cancel the upconvert request if need be. + */ + ret = ocfs2_lock_create(osb, lockres, LKM_NLMODE, 0); + if (ret < 0) { + mlog_errno(ret); + goto out; + } + + ret = ocfs2_wait_for_mask(&mw); + if (ret) { + mlog_errno(ret); + goto out; + } + spin_lock_irqsave(&lockres->l_lock, flags); + } + + lockres->l_action = OCFS2_AST_CONVERT; + lkm_flags |= LKM_CONVERT; + lockres->l_requested = level; + lockres_or_flags(lockres, OCFS2_LOCK_BUSY); + + lockres_add_mask_waiter(lockres, &mw, OCFS2_LOCK_BUSY, 0); + spin_unlock_irqrestore(&lockres->l_lock, flags); + + ret = dlmlock(osb->dlm, level, &lockres->l_lksb, lkm_flags, + lockres->l_name, OCFS2_LOCK_ID_MAX_LEN - 1, + ocfs2_locking_ast, lockres, ocfs2_blocking_ast); + if (ret != DLM_NORMAL) { + if (trylock && ret == DLM_NOTQUEUED) + ret = -EAGAIN; + else { + ocfs2_log_dlm_error("dlmlock", ret, lockres); + ret = -EINVAL; + } + + ocfs2_recover_from_dlm_error(lockres, 1); + lockres_remove_mask_waiter(lockres, &mw); + goto out; + } + + ret = ocfs2_wait_for_mask_interruptible(&mw, lockres); + if (ret == -ERESTARTSYS) { + /* + * Userspace can cause deadlock itself with + * flock(). Current behavior locally is to allow the + * deadlock, but abort the system call if a signal is + * received. We follow this example, otherwise a + * poorly written program could sit in kernel until + * reboot. + * + * Handling this is a bit more complicated for Ocfs2 + * though. We can't exit this function with an + * outstanding lock request, so a cancel convert is + * required. We intentionally overwrite 'ret' - if the + * cancel fails and the lock was granted, it's easier + * to just bubble sucess back up to the user. + */ + ret = ocfs2_flock_handle_signal(lockres, level); + } + +out: + + mlog(0, "Lock: \"%s\" ex: %d, trylock: %d, returns: %d\n", + lockres->l_name, ex, trylock, ret); + return ret; +} + +void ocfs2_file_unlock(struct file *file) +{ + int ret; + unsigned long flags; + struct ocfs2_file_private *fp = file->private_data; + struct ocfs2_lock_res *lockres = &fp->fp_flock; + struct ocfs2_super *osb = OCFS2_SB(file->f_mapping->host->i_sb); + struct ocfs2_mask_waiter mw; + + ocfs2_init_mask_waiter(&mw); + + if (!(lockres->l_flags & OCFS2_LOCK_ATTACHED)) + return; + + if (lockres->l_level == LKM_NLMODE) + return; + + mlog(0, "Unlock: \"%s\" flags: 0x%lx, level: %d, act: %d\n", + lockres->l_name, lockres->l_flags, lockres->l_level, + lockres->l_action); + + spin_lock_irqsave(&lockres->l_lock, flags); + /* + * Fake a blocking ast for the downconvert code. + */ + lockres_or_flags(lockres, OCFS2_LOCK_BLOCKED); + lockres->l_blocking = LKM_EXMODE; + + ocfs2_prepare_downconvert(lockres, LKM_NLMODE); + lockres_add_mask_waiter(lockres, &mw, OCFS2_LOCK_BUSY, 0); + spin_unlock_irqrestore(&lockres->l_lock, flags); + + ret = ocfs2_downconvert_lock(osb, lockres, LKM_NLMODE, 0); + if (ret) { + mlog_errno(ret); + return; + } + + ret = ocfs2_wait_for_mask(&mw); + if (ret) + mlog_errno(ret); +} + static void ocfs2_downconvert_on_unlock(struct ocfs2_super *osb, struct ocfs2_lock_res *lockres) { diff --git a/fs/ocfs2/dlmglue.h b/fs/ocfs2/dlmglue.h index 6dcbc944e8ce..5f17243ba501 100644 --- a/fs/ocfs2/dlmglue.h +++ b/fs/ocfs2/dlmglue.h @@ -66,6 +66,9 @@ void ocfs2_inode_lock_res_init(struct ocfs2_lock_res *res, struct inode *inode); void ocfs2_dentry_lock_res_init(struct ocfs2_dentry_lock *dl, u64 parent, struct inode *inode); +struct ocfs2_file_private; +void ocfs2_file_lock_res_init(struct ocfs2_lock_res *lockres, + struct ocfs2_file_private *fp); void ocfs2_lock_res_free(struct ocfs2_lock_res *res); int ocfs2_create_new_inode_locks(struct inode *inode); int ocfs2_drop_inode_locks(struct inode *inode); @@ -98,6 +101,8 @@ int ocfs2_rename_lock(struct ocfs2_super *osb); void ocfs2_rename_unlock(struct ocfs2_super *osb); int ocfs2_dentry_lock(struct dentry *dentry, int ex); void ocfs2_dentry_unlock(struct dentry *dentry, int ex); +int ocfs2_file_lock(struct file *file, int ex, int trylock); +void ocfs2_file_unlock(struct file *file); void ocfs2_mark_lockres_freeing(struct ocfs2_lock_res *lockres); void ocfs2_simple_drop_lockres(struct ocfs2_super *osb, diff --git a/fs/ocfs2/file.h b/fs/ocfs2/file.h index 066f14add3a8..048ddcaf5c80 100644 --- a/fs/ocfs2/file.h +++ b/fs/ocfs2/file.h @@ -32,6 +32,12 @@ extern const struct inode_operations ocfs2_file_iops; extern const struct inode_operations ocfs2_special_file_iops; struct ocfs2_alloc_context; +struct ocfs2_file_private { + struct file *fp_file; + struct mutex fp_mutex; + struct ocfs2_lock_res fp_flock; +}; + enum ocfs2_alloc_restarted { RESTART_NONE = 0, RESTART_TRANS, diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h index d12bd7036da7..63c131e1cc77 100644 --- a/fs/ocfs2/ocfs2.h +++ b/fs/ocfs2/ocfs2.h @@ -101,6 +101,7 @@ enum ocfs2_unlock_action { * about to be * dropped. */ #define OCFS2_LOCK_QUEUED (0x00000100) /* queued for downconvert */ +#define OCFS2_LOCK_NOCACHE (0x00000200) /* don't use a holder count */ struct ocfs2_lock_res_ops; diff --git a/fs/ocfs2/ocfs2_lockid.h b/fs/ocfs2/ocfs2_lockid.h index 4ca02b1c38ac..86f3e3799c2b 100644 --- a/fs/ocfs2/ocfs2_lockid.h +++ b/fs/ocfs2/ocfs2_lockid.h @@ -45,6 +45,7 @@ enum ocfs2_lock_type { OCFS2_LOCK_TYPE_RW, OCFS2_LOCK_TYPE_DENTRY, OCFS2_LOCK_TYPE_OPEN, + OCFS2_LOCK_TYPE_FLOCK, OCFS2_NUM_LOCK_TYPES }; @@ -73,6 +74,9 @@ static inline char ocfs2_lock_type_char(enum ocfs2_lock_type type) case OCFS2_LOCK_TYPE_OPEN: c = 'O'; break; + case OCFS2_LOCK_TYPE_FLOCK: + c = 'F'; + break; default: c = '\0'; } @@ -90,6 +94,7 @@ static char *ocfs2_lock_type_strings[] = { [OCFS2_LOCK_TYPE_RW] = "Write/Read", [OCFS2_LOCK_TYPE_DENTRY] = "Dentry", [OCFS2_LOCK_TYPE_OPEN] = "Open", + [OCFS2_LOCK_TYPE_FLOCK] = "Flock", }; static inline const char *ocfs2_lock_type_string(enum ocfs2_lock_type type) -- cgit v1.2.3-59-g8ed1b From 53fc622b9e829c8e632e45ef8c14f054388759c1 Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Thu, 20 Dec 2007 16:49:04 -0800 Subject: [PATCH 2/2] ocfs2: cluster aware flock() Hook up ocfs2_flock(), using the new flock lock type in dlmglue.c. A new mount option, "localflocks" is added so that users can revert to old functionality as need be. Signed-off-by: Mark Fasheh --- Documentation/filesystems/ocfs2.txt | 1 + fs/ocfs2/Makefile | 1 + fs/ocfs2/file.c | 60 ++++++++++++++++- fs/ocfs2/locks.c | 125 ++++++++++++++++++++++++++++++++++++ fs/ocfs2/locks.h | 31 +++++++++ fs/ocfs2/ocfs2.h | 1 + fs/ocfs2/super.c | 19 ++++++ 7 files changed, 237 insertions(+), 1 deletion(-) create mode 100644 fs/ocfs2/locks.c create mode 100644 fs/ocfs2/locks.h diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt index 071fad137eb5..c318a8bbb1ef 100644 --- a/Documentation/filesystems/ocfs2.txt +++ b/Documentation/filesystems/ocfs2.txt @@ -75,3 +75,4 @@ commit=nrsec (*) Ocfs2 can be told to sync all its data and metadata localalloc=8(*) Allows custom localalloc size in MB. If the value is too large, the fs will silently revert it to the default. Localalloc is not enabled for local mounts. +localflocks This disables cluster aware flock. diff --git a/fs/ocfs2/Makefile b/fs/ocfs2/Makefile index 3591890b32c6..4d4ce48bb42c 100644 --- a/fs/ocfs2/Makefile +++ b/fs/ocfs2/Makefile @@ -19,6 +19,7 @@ ocfs2-objs := \ ioctl.o \ journal.o \ localalloc.o \ + locks.o \ mmap.o \ namei.o \ resize.o \ diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 432e5f3c4784..caefd571782e 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -51,6 +51,7 @@ #include "inode.h" #include "ioctl.h" #include "journal.h" +#include "locks.h" #include "mmap.h" #include "suballoc.h" #include "super.h" @@ -63,6 +64,35 @@ static int ocfs2_sync_inode(struct inode *inode) return sync_mapping_buffers(inode->i_mapping); } +static int ocfs2_init_file_private(struct inode *inode, struct file *file) +{ + struct ocfs2_file_private *fp; + + fp = kzalloc(sizeof(struct ocfs2_file_private), GFP_KERNEL); + if (!fp) + return -ENOMEM; + + fp->fp_file = file; + mutex_init(&fp->fp_mutex); + ocfs2_file_lock_res_init(&fp->fp_flock, fp); + file->private_data = fp; + + return 0; +} + +static void ocfs2_free_file_private(struct inode *inode, struct file *file) +{ + struct ocfs2_file_private *fp = file->private_data; + struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); + + if (fp) { + ocfs2_simple_drop_lockres(osb, &fp->fp_flock); + ocfs2_lock_res_free(&fp->fp_flock); + kfree(fp); + file->private_data = NULL; + } +} + static int ocfs2_file_open(struct inode *inode, struct file *file) { int status; @@ -89,7 +119,18 @@ static int ocfs2_file_open(struct inode *inode, struct file *file) oi->ip_open_count++; spin_unlock(&oi->ip_lock); - status = 0; + + status = ocfs2_init_file_private(inode, file); + if (status) { + /* + * We want to set open count back if we're failing the + * open. + */ + spin_lock(&oi->ip_lock); + oi->ip_open_count--; + spin_unlock(&oi->ip_lock); + } + leave: mlog_exit(status); return status; @@ -108,11 +149,24 @@ static int ocfs2_file_release(struct inode *inode, struct file *file) oi->ip_flags &= ~OCFS2_INODE_OPEN_DIRECT; spin_unlock(&oi->ip_lock); + ocfs2_free_file_private(inode, file); + mlog_exit(0); return 0; } +static int ocfs2_dir_open(struct inode *inode, struct file *file) +{ + return ocfs2_init_file_private(inode, file); +} + +static int ocfs2_dir_release(struct inode *inode, struct file *file) +{ + ocfs2_free_file_private(inode, file); + return 0; +} + static int ocfs2_sync_file(struct file *file, struct dentry *dentry, int datasync) @@ -2191,6 +2245,7 @@ const struct file_operations ocfs2_fops = { #ifdef CONFIG_COMPAT .compat_ioctl = ocfs2_compat_ioctl, #endif + .flock = ocfs2_flock, .splice_read = ocfs2_file_splice_read, .splice_write = ocfs2_file_splice_write, }; @@ -2199,8 +2254,11 @@ const struct file_operations ocfs2_dops = { .read = generic_read_dir, .readdir = ocfs2_readdir, .fsync = ocfs2_sync_file, + .release = ocfs2_dir_release, + .open = ocfs2_dir_open, .ioctl = ocfs2_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = ocfs2_compat_ioctl, #endif + .flock = ocfs2_flock, }; diff --git a/fs/ocfs2/locks.c b/fs/ocfs2/locks.c new file mode 100644 index 000000000000..203f87143877 --- /dev/null +++ b/fs/ocfs2/locks.c @@ -0,0 +1,125 @@ +/* -*- mode: c; c-basic-offset: 8; -*- + * vim: noexpandtab sw=8 ts=8 sts=0: + * + * locks.c + * + * Userspace file locking support + * + * Copyright (C) 2007 Oracle. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the + * Free Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 021110-1307, USA. + */ + +#include + +#define MLOG_MASK_PREFIX ML_INODE +#include + +#include "ocfs2.h" + +#include "dlmglue.h" +#include "file.h" +#include "locks.h" + +static int ocfs2_do_flock(struct file *file, struct inode *inode, + int cmd, struct file_lock *fl) +{ + int ret = 0, level = 0, trylock = 0; + struct ocfs2_file_private *fp = file->private_data; + struct ocfs2_lock_res *lockres = &fp->fp_flock; + + if (fl->fl_type == F_WRLCK) + level = 1; + if (!IS_SETLKW(cmd)) + trylock = 1; + + mutex_lock(&fp->fp_mutex); + + if (lockres->l_flags & OCFS2_LOCK_ATTACHED && + lockres->l_level > LKM_NLMODE) { + int old_level = 0; + + if (lockres->l_level == LKM_EXMODE) + old_level = 1; + + if (level == old_level) + goto out; + + /* + * Converting an existing lock is not guaranteed to be + * atomic, so we can get away with simply unlocking + * here and allowing the lock code to try at the new + * level. + */ + + flock_lock_file_wait(file, + &(struct file_lock){.fl_type = F_UNLCK}); + + ocfs2_file_unlock(file); + } + + ret = ocfs2_file_lock(file, level, trylock); + if (ret) { + if (ret == -EAGAIN && trylock) + ret = -EWOULDBLOCK; + else + mlog_errno(ret); + goto out; + } + + ret = flock_lock_file_wait(file, fl); + +out: + mutex_unlock(&fp->fp_mutex); + + return ret; +} + +static int ocfs2_do_funlock(struct file *file, int cmd, struct file_lock *fl) +{ + int ret; + struct ocfs2_file_private *fp = file->private_data; + + mutex_lock(&fp->fp_mutex); + ocfs2_file_unlock(file); + ret = flock_lock_file_wait(file, fl); + mutex_unlock(&fp->fp_mutex); + + return ret; +} + +/* + * Overall flow of ocfs2_flock() was influenced by gfs2_flock(). + */ +int ocfs2_flock(struct file *file, int cmd, struct file_lock *fl) +{ + struct inode *inode = file->f_mapping->host; + struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); + + if (!(fl->fl_flags & FL_FLOCK)) + return -ENOLCK; + if (__mandatory_lock(inode)) + return -ENOLCK; + + if ((osb->s_mount_opt & OCFS2_MOUNT_LOCALFLOCKS) || + ocfs2_mount_local(osb)) + return flock_lock_file_wait(file, fl); + + if (fl->fl_type == F_UNLCK) + return ocfs2_do_funlock(file, cmd, fl); + else + return ocfs2_do_flock(file, inode, cmd, fl); +} diff --git a/fs/ocfs2/locks.h b/fs/ocfs2/locks.h new file mode 100644 index 000000000000..9743ef2324ec --- /dev/null +++ b/fs/ocfs2/locks.h @@ -0,0 +1,31 @@ +/* -*- mode: c; c-basic-offset: 8; -*- + * vim: noexpandtab sw=8 ts=8 sts=0: + * + * locks.h + * + * Function prototypes for Userspace file locking support + * + * Copyright (C) 2002, 2004 Oracle. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the + * Free Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 021110-1307, USA. + */ + +#ifndef OCFS2_LOCKS_H +#define OCFS2_LOCKS_H + +int ocfs2_flock(struct file *file, int cmd, struct file_lock *fl); + +#endif /* OCFS2_LOCKS_H */ diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h index 63c131e1cc77..22e334d125d0 100644 --- a/fs/ocfs2/ocfs2.h +++ b/fs/ocfs2/ocfs2.h @@ -171,6 +171,7 @@ enum ocfs2_mount_options OCFS2_MOUNT_NOINTR = 1 << 2, /* Don't catch signals */ OCFS2_MOUNT_ERRORS_PANIC = 1 << 3, /* Panic on errors */ OCFS2_MOUNT_DATA_WRITEBACK = 1 << 4, /* No data ordering */ + OCFS2_MOUNT_LOCALFLOCKS = 1 << 5, /* No cluster aware user file locks */ }; #define OCFS2_OSB_SOFT_RO 0x0001 diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index 1104f14c3183..4a091f586646 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -153,6 +153,7 @@ enum { Opt_slot, Opt_commit, Opt_localalloc, + Opt_localflocks, Opt_err, }; @@ -170,6 +171,7 @@ static match_table_t tokens = { {Opt_slot, "preferred_slot=%u"}, {Opt_commit, "commit=%u"}, {Opt_localalloc, "localalloc=%d"}, + {Opt_localflocks, "localflocks"}, {Opt_err, NULL} }; @@ -848,6 +850,20 @@ static int ocfs2_parse_options(struct super_block *sb, if (option >= 0 && (option <= ocfs2_local_alloc_size(sb) * 8)) mopt->localalloc_opt = option; break; + case Opt_localflocks: + /* + * Changing this during remount could race + * flock() requests, or "unbalance" existing + * ones (e.g., a lock is taken in one mode but + * dropped in the other). If users care enough + * to flip locking modes during remount, we + * could add a "local" flag to individual + * flock structures for proper tracking of + * state. + */ + if (!is_remount) + mopt->mount_opt |= OCFS2_MOUNT_LOCALFLOCKS; + break; default: mlog(ML_ERROR, "Unrecognized mount option \"%s\" " @@ -903,6 +919,9 @@ static int ocfs2_show_options(struct seq_file *s, struct vfsmount *mnt) if (osb->local_alloc_size != OCFS2_DEFAULT_LOCAL_ALLOC_SIZE) seq_printf(s, ",localalloc=%d", osb->local_alloc_size); + if (opts & OCFS2_MOUNT_LOCALFLOCKS) + seq_printf(s, ",localflocks,"); + return 0; } -- cgit v1.2.3-59-g8ed1b From 5fa0613ea58a80f69852b242337121bd39dc798e Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Fri, 11 Jan 2008 00:11:45 +0100 Subject: ocfs2: Silence false lockdep warnings Create separate lockdep lock classes for system file's i_mutexes. They are used to guard allocations and similar things and thus rank differently than i_mutex of a regular file or directory. Signed-off-by: Jan Kara Signed-off-by: Mark Fasheh --- fs/ocfs2/export.c | 4 ++-- fs/ocfs2/inode.c | 10 +++++++++- fs/ocfs2/inode.h | 7 ++++--- fs/ocfs2/journal.c | 2 +- fs/ocfs2/namei.c | 2 +- fs/ocfs2/super.c | 4 ++-- fs/ocfs2/sysfile.c | 2 +- 7 files changed, 20 insertions(+), 11 deletions(-) diff --git a/fs/ocfs2/export.c b/fs/ocfs2/export.c index 1f9e353cac45..67527cebf214 100644 --- a/fs/ocfs2/export.c +++ b/fs/ocfs2/export.c @@ -58,7 +58,7 @@ static struct dentry *ocfs2_get_dentry(struct super_block *sb, return ERR_PTR(-ESTALE); } - inode = ocfs2_iget(OCFS2_SB(sb), handle->ih_blkno, 0); + inode = ocfs2_iget(OCFS2_SB(sb), handle->ih_blkno, 0, 0); if (IS_ERR(inode)) return (void *)inode; @@ -109,7 +109,7 @@ static struct dentry *ocfs2_get_parent(struct dentry *child) goto bail_unlock; } - inode = ocfs2_iget(OCFS2_SB(dir->i_sb), blkno, 0); + inode = ocfs2_iget(OCFS2_SB(dir->i_sb), blkno, 0, 0); if (IS_ERR(inode)) { mlog(ML_ERROR, "Unable to create inode %llu\n", (unsigned long long)blkno); diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c index 00cd5b7f3e52..5e19c119183d 100644 --- a/fs/ocfs2/inode.c +++ b/fs/ocfs2/inode.c @@ -57,8 +57,11 @@ struct ocfs2_find_inode_args u64 fi_blkno; unsigned long fi_ino; unsigned int fi_flags; + unsigned int fi_sysfile_type; }; +static struct lock_class_key ocfs2_sysfile_lock_key[NUM_SYSTEM_INODES]; + static int ocfs2_read_locked_inode(struct inode *inode, struct ocfs2_find_inode_args *args); static int ocfs2_init_locked_inode(struct inode *inode, void *opaque); @@ -106,7 +109,8 @@ void ocfs2_get_inode_flags(struct ocfs2_inode_info *oi) oi->ip_attr |= OCFS2_DIRSYNC_FL; } -struct inode *ocfs2_iget(struct ocfs2_super *osb, u64 blkno, int flags) +struct inode *ocfs2_iget(struct ocfs2_super *osb, u64 blkno, unsigned flags, + int sysfile_type) { struct inode *inode = NULL; struct super_block *sb = osb->sb; @@ -126,6 +130,7 @@ struct inode *ocfs2_iget(struct ocfs2_super *osb, u64 blkno, int flags) args.fi_blkno = blkno; args.fi_flags = flags; args.fi_ino = ino_from_blkno(sb, blkno); + args.fi_sysfile_type = sysfile_type; inode = iget5_locked(sb, args.fi_ino, ocfs2_find_actor, ocfs2_init_locked_inode, &args); @@ -200,6 +205,9 @@ static int ocfs2_init_locked_inode(struct inode *inode, void *opaque) inode->i_ino = args->fi_ino; OCFS2_I(inode)->ip_blkno = args->fi_blkno; + if (args->fi_sysfile_type != 0) + lockdep_set_class(&inode->i_mutex, + &ocfs2_sysfile_lock_key[args->fi_sysfile_type]); mlog_exit(0); return 0; diff --git a/fs/ocfs2/inode.h b/fs/ocfs2/inode.h index a61c044eb7da..390a85596aa0 100644 --- a/fs/ocfs2/inode.h +++ b/fs/ocfs2/inode.h @@ -120,9 +120,10 @@ void ocfs2_delete_inode(struct inode *inode); void ocfs2_drop_inode(struct inode *inode); /* Flags for ocfs2_iget() */ -#define OCFS2_FI_FLAG_SYSFILE 0x4 -#define OCFS2_FI_FLAG_ORPHAN_RECOVERY 0x8 -struct inode *ocfs2_iget(struct ocfs2_super *osb, u64 feoff, int flags); +#define OCFS2_FI_FLAG_SYSFILE 0x1 +#define OCFS2_FI_FLAG_ORPHAN_RECOVERY 0x2 +struct inode *ocfs2_iget(struct ocfs2_super *osb, u64 feoff, unsigned flags, + int sysfile_type); int ocfs2_inode_init_private(struct inode *inode); int ocfs2_inode_revalidate(struct dentry *dentry); int ocfs2_populate_inode(struct inode *inode, struct ocfs2_dinode *fe, diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c index 8b9ce2a729ab..f31c7e8c19c3 100644 --- a/fs/ocfs2/journal.c +++ b/fs/ocfs2/journal.c @@ -1244,7 +1244,7 @@ static int ocfs2_orphan_filldir(void *priv, const char *name, int name_len, /* Skip bad inodes so that recovery can continue */ iter = ocfs2_iget(p->osb, ino, - OCFS2_FI_FLAG_ORPHAN_RECOVERY); + OCFS2_FI_FLAG_ORPHAN_RECOVERY, 0); if (IS_ERR(iter)) return 0; diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c index 74018caf8053..ae9ad9587516 100644 --- a/fs/ocfs2/namei.c +++ b/fs/ocfs2/namei.c @@ -128,7 +128,7 @@ static struct dentry *ocfs2_lookup(struct inode *dir, struct dentry *dentry, if (status < 0) goto bail_add; - inode = ocfs2_iget(OCFS2_SB(dir->i_sb), blkno, 0); + inode = ocfs2_iget(OCFS2_SB(dir->i_sb), blkno, 0, 0); if (IS_ERR(inode)) { ret = ERR_PTR(-EACCES); goto bail_unlock; diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index 4a091f586646..01fe40ee5ea9 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -220,7 +220,7 @@ static int ocfs2_init_global_system_inodes(struct ocfs2_super *osb) mlog_entry_void(); - new = ocfs2_iget(osb, osb->root_blkno, OCFS2_FI_FLAG_SYSFILE); + new = ocfs2_iget(osb, osb->root_blkno, OCFS2_FI_FLAG_SYSFILE, 0); if (IS_ERR(new)) { status = PTR_ERR(new); mlog_errno(status); @@ -228,7 +228,7 @@ static int ocfs2_init_global_system_inodes(struct ocfs2_super *osb) } osb->root_inode = new; - new = ocfs2_iget(osb, osb->system_dir_blkno, OCFS2_FI_FLAG_SYSFILE); + new = ocfs2_iget(osb, osb->system_dir_blkno, OCFS2_FI_FLAG_SYSFILE, 0); if (IS_ERR(new)) { status = PTR_ERR(new); mlog_errno(status); diff --git a/fs/ocfs2/sysfile.c b/fs/ocfs2/sysfile.c index fd2e846e3e6f..ab713ebdd546 100644 --- a/fs/ocfs2/sysfile.c +++ b/fs/ocfs2/sysfile.c @@ -112,7 +112,7 @@ static struct inode * _ocfs2_get_system_file_inode(struct ocfs2_super *osb, goto bail; } - inode = ocfs2_iget(osb, blkno, OCFS2_FI_FLAG_SYSFILE); + inode = ocfs2_iget(osb, blkno, OCFS2_FI_FLAG_SYSFILE, type); if (IS_ERR(inode)) { mlog_errno(PTR_ERR(inode)); inode = NULL; -- cgit v1.2.3-59-g8ed1b From d2849fb294d92d6eee0a811c688f1ecb39d26800 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Wed, 19 Dec 2007 15:24:09 +0100 Subject: ocfs2: Safer read_inline_data() In ocfs2_read_inline_data() we should store file size in loff_t. Although the file size should fit in 32 bits we cannot be sure in case filesystem is corrupted. Signed-off-by: Jan Kara Signed-off-by: Mark Fasheh --- fs/ocfs2/aops.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c index 286af3a11383..bc7b4cbbe8ec 100644 --- a/fs/ocfs2/aops.c +++ b/fs/ocfs2/aops.c @@ -217,7 +217,7 @@ int ocfs2_read_inline_data(struct inode *inode, struct page *page, struct buffer_head *di_bh) { void *kaddr; - unsigned int size; + loff_t size; struct ocfs2_dinode *di = (struct ocfs2_dinode *)di_bh->b_data; if (!(le16_to_cpu(di->i_dyn_features) & OCFS2_INLINE_DATA_FL)) { @@ -231,8 +231,9 @@ int ocfs2_read_inline_data(struct inode *inode, struct page *page, if (size > PAGE_CACHE_SIZE || size > ocfs2_max_inline_data(inode->i_sb)) { ocfs2_error(inode->i_sb, - "Inode %llu has with inline data has bad size: %u", - (unsigned long long)OCFS2_I(inode)->ip_blkno, size); + "Inode %llu has with inline data has bad size: %Lu", + (unsigned long long)OCFS2_I(inode)->ip_blkno, + (unsigned long long)size); return -EROFS; } -- cgit v1.2.3-59-g8ed1b From 32c3c0e2e515197ad240f5104116254975e6bbce Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Wed, 19 Dec 2007 15:24:52 +0100 Subject: ocfs2: Use generic_file_llseek We should use generic_file_llseek() and not default_llseek() so that s_maxbytes gets properly checked when seeking. Signed-off-by: Jan Kara Signed-off-by: Mark Fasheh --- fs/ocfs2/file.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index caefd571782e..6ebc9f9ec52c 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -2233,6 +2233,7 @@ const struct inode_operations ocfs2_special_file_iops = { }; const struct file_operations ocfs2_fops = { + .llseek = generic_file_llseek, .read = do_sync_read, .write = do_sync_write, .mmap = ocfs2_mmap, @@ -2251,6 +2252,7 @@ const struct file_operations ocfs2_fops = { }; const struct file_operations ocfs2_dops = { + .llseek = generic_file_llseek, .read = generic_read_dir, .readdir = ocfs2_readdir, .fsync = ocfs2_sync_file, -- cgit v1.2.3-59-g8ed1b From 634bf74d1e8a8d06727505ea4eb73e780d7aa246 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Wed, 19 Dec 2007 15:25:42 +0100 Subject: ocfs2: printf fixes Explicitely convert loff_t to long long in printf. Just for sure... Signed-off-by: Jan Kara Signed-off-by: Mark Fasheh --- fs/ocfs2/file.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 6ebc9f9ec52c..ed5d5232e85d 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -626,7 +626,7 @@ int ocfs2_lock_allocators(struct inode *inode, struct ocfs2_dinode *di, mlog(0, "extend inode %llu, i_size = %lld, di->i_clusters = %u, " "clusters_to_add = %u, extents_to_split = %u\n", - (unsigned long long)OCFS2_I(inode)->ip_blkno, i_size_read(inode), + (unsigned long long)OCFS2_I(inode)->ip_blkno, (long long)i_size_read(inode), le32_to_cpu(di->i_clusters), clusters_to_add, extents_to_split); num_free_extents = ocfs2_num_free_extents(osb, inode, di); @@ -807,7 +807,7 @@ restarted_transaction: le32_to_cpu(fe->i_clusters), (unsigned long long)le64_to_cpu(fe->i_size)); mlog(0, "inode: ip_clusters=%u, i_size=%lld\n", - OCFS2_I(inode)->ip_clusters, i_size_read(inode)); + OCFS2_I(inode)->ip_clusters, (long long)i_size_read(inode)); leave: if (handle) { -- cgit v1.2.3-59-g8ed1b From 17104683d262fc6ab58488c4a3f0415012acc636 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Tue, 6 Nov 2007 16:10:23 -0800 Subject: ocfs2: Update default cluster timeouts Lots of people are having trouble with the default timeouts, which are too low. These new values are derived from an informal survey taken on ocfs2-users, as well as data from bug reports. This should reduce the amount of cluster disconnects and subsequent fencing seen during normal workloads. Signed-off-by: Sunil Mushran Signed-off-by: Mark Fasheh --- fs/ocfs2/cluster/heartbeat.h | 2 +- fs/ocfs2/cluster/tcp.h | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/ocfs2/cluster/heartbeat.h b/fs/ocfs2/cluster/heartbeat.h index 35397dd5ecdb..e511339886b3 100644 --- a/fs/ocfs2/cluster/heartbeat.h +++ b/fs/ocfs2/cluster/heartbeat.h @@ -35,7 +35,7 @@ #define O2HB_LIVE_THRESHOLD 2 /* number of equal samples to be seen as dead */ extern unsigned int o2hb_dead_threshold; -#define O2HB_DEFAULT_DEAD_THRESHOLD 7 +#define O2HB_DEFAULT_DEAD_THRESHOLD 31 /* Otherwise MAX_WRITE_TIMEOUT will be zero... */ #define O2HB_MIN_DEAD_THRESHOLD 2 #define O2HB_MAX_WRITE_TIMEOUT_MS (O2HB_REGION_TIMEOUT_MS * (o2hb_dead_threshold - 1)) diff --git a/fs/ocfs2/cluster/tcp.h b/fs/ocfs2/cluster/tcp.h index da880fc215f0..f36f66aab3dd 100644 --- a/fs/ocfs2/cluster/tcp.h +++ b/fs/ocfs2/cluster/tcp.h @@ -60,8 +60,8 @@ typedef void (o2net_post_msg_handler_func)(int status, void *data, /* same as hb delay, we're waiting for another node to recognize our hb */ #define O2NET_RECONNECT_DELAY_MS_DEFAULT 2000 -#define O2NET_KEEPALIVE_DELAY_MS_DEFAULT 5000 -#define O2NET_IDLE_TIMEOUT_MS_DEFAULT 10000 +#define O2NET_KEEPALIVE_DELAY_MS_DEFAULT 2000 +#define O2NET_IDLE_TIMEOUT_MS_DEFAULT 30000 /* TODO: figure this out.... */ -- cgit v1.2.3-59-g8ed1b From 4092d49f705aa19750c39758fa1be767e162c48d Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Tue, 25 Dec 2007 15:52:59 +0100 Subject: ocfs2: convert byte order of constant instead of variable Convert byte order of constant instead of variable it will be done at compile time vs run time. Remove unused le32_and_cpu. Signed-off-by: Marcin Slusarz Signed-off-by: Mark Fasheh --- fs/ocfs2/endian.h | 5 ----- fs/ocfs2/inode.c | 2 +- 2 files changed, 1 insertion(+), 6 deletions(-) diff --git a/fs/ocfs2/endian.h b/fs/ocfs2/endian.h index ff257628af16..1942e09f6ee5 100644 --- a/fs/ocfs2/endian.h +++ b/fs/ocfs2/endian.h @@ -37,11 +37,6 @@ static inline void le64_add_cpu(__le64 *var, u64 val) *var = cpu_to_le64(le64_to_cpu(*var) + val); } -static inline void le32_and_cpu(__le32 *var, u32 val) -{ - *var = cpu_to_le32(le32_to_cpu(*var) & val); -} - static inline void be32_add_cpu(__be32 *var, u32 val) { *var = cpu_to_be32(be32_to_cpu(*var) + val); diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c index 5e19c119183d..7e9e4c79aec7 100644 --- a/fs/ocfs2/inode.c +++ b/fs/ocfs2/inode.c @@ -620,7 +620,7 @@ static int ocfs2_remove_inode(struct inode *inode, } di->i_dtime = cpu_to_le64(CURRENT_TIME.tv_sec); - le32_and_cpu(&di->i_flags, ~(OCFS2_VALID_FL | OCFS2_ORPHANED_FL)); + di->i_flags &= cpu_to_le32(~(OCFS2_VALID_FL | OCFS2_ORPHANED_FL)); status = ocfs2_journal_dirty(handle, di_bh); if (status < 0) { -- cgit v1.2.3-59-g8ed1b From 2d4b1cbb44f5557727c35895a83f82d023573fa9 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Thu, 10 Jan 2008 15:20:55 +0800 Subject: ocfs2/dlm: Clear joining_node on hearbeat node down Currently the process of dlm join contains 2 steps: query join and assert join. After query join, the joined node will set its joining_node. So if the joining node happens to panic before the 2nd step, the joined node will fail to clear its joining_node flag because that node isn't in the domain map. It at least cause 2 problems. 1. All the new join request will fail. So no new node can mount the volume. 2. The joined node can't umount the volume since during the umount process it has to wait for the joining_node to be unknown. So the umount will be hanged. The solution is to clear the joining_node before we check the domain map. Signed-off-by: Tao Ma Signed-off-by: Mark Fasheh --- fs/ocfs2/dlm/dlmrecovery.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c index b10f3e313fbf..91f747b8a538 100644 --- a/fs/ocfs2/dlm/dlmrecovery.c +++ b/fs/ocfs2/dlm/dlmrecovery.c @@ -2270,6 +2270,12 @@ static void __dlm_hb_node_down(struct dlm_ctxt *dlm, int idx) } } + /* Clean up join state on node death. */ + if (dlm->joining_node == idx) { + mlog(0, "Clearing join state for node %u\n", idx); + __dlm_set_joining_node(dlm, DLM_LOCK_RES_OWNER_UNKNOWN); + } + /* check to see if the node is already considered dead */ if (!test_bit(idx, dlm->live_nodes_map)) { mlog(0, "for domain %s, node %d is already dead. " @@ -2288,12 +2294,6 @@ static void __dlm_hb_node_down(struct dlm_ctxt *dlm, int idx) clear_bit(idx, dlm->live_nodes_map); - /* Clean up join state on node death. */ - if (dlm->joining_node == idx) { - mlog(0, "Clearing join state for node %u\n", idx); - __dlm_set_joining_node(dlm, DLM_LOCK_RES_OWNER_UNKNOWN); - } - /* make sure local cleanup occurs before the heartbeat events */ if (!test_bit(idx, dlm->recovery_map)) dlm_do_local_recovery_cleanup(dlm, idx); -- cgit v1.2.3-59-g8ed1b From 0e5ae032030387bf0926aa980f2105646ead2b47 Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Tue, 6 Nov 2007 15:52:58 -0800 Subject: ocfs2: bump version number Bump the printed version to 1.5.0. This helps us quickly identify which version of Ocfs2 a bug filer is running. Signed-off-by: Mark Fasheh --- fs/ocfs2/cluster/ver.c | 2 +- fs/ocfs2/dlm/dlmfsver.c | 2 +- fs/ocfs2/dlm/dlmver.c | 2 +- fs/ocfs2/ver.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/ocfs2/cluster/ver.c b/fs/ocfs2/cluster/ver.c index 7286c48bb30d..a56eee6abad3 100644 --- a/fs/ocfs2/cluster/ver.c +++ b/fs/ocfs2/cluster/ver.c @@ -28,7 +28,7 @@ #include "ver.h" -#define CLUSTER_BUILD_VERSION "1.3.3" +#define CLUSTER_BUILD_VERSION "1.5.0" #define VERSION_STR "OCFS2 Node Manager " CLUSTER_BUILD_VERSION diff --git a/fs/ocfs2/dlm/dlmfsver.c b/fs/ocfs2/dlm/dlmfsver.c index d2be3ad841f9..a733b3321f83 100644 --- a/fs/ocfs2/dlm/dlmfsver.c +++ b/fs/ocfs2/dlm/dlmfsver.c @@ -28,7 +28,7 @@ #include "dlmfsver.h" -#define DLM_BUILD_VERSION "1.3.3" +#define DLM_BUILD_VERSION "1.5.0" #define VERSION_STR "OCFS2 DLMFS " DLM_BUILD_VERSION diff --git a/fs/ocfs2/dlm/dlmver.c b/fs/ocfs2/dlm/dlmver.c index 7ef2653f8f41..dfc0da4d158d 100644 --- a/fs/ocfs2/dlm/dlmver.c +++ b/fs/ocfs2/dlm/dlmver.c @@ -28,7 +28,7 @@ #include "dlmver.h" -#define DLM_BUILD_VERSION "1.3.3" +#define DLM_BUILD_VERSION "1.5.0" #define VERSION_STR "OCFS2 DLM " DLM_BUILD_VERSION diff --git a/fs/ocfs2/ver.c b/fs/ocfs2/ver.c index 5405ce121c99..e2488f4128a2 100644 --- a/fs/ocfs2/ver.c +++ b/fs/ocfs2/ver.c @@ -29,7 +29,7 @@ #include "ver.h" -#define OCFS2_BUILD_VERSION "1.3.3" +#define OCFS2_BUILD_VERSION "1.5.0" #define VERSION_STR "OCFS2 " OCFS2_BUILD_VERSION -- cgit v1.2.3-59-g8ed1b From 02ac0499c0e3c62f2e2bf61a13870b36ea103564 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Mon, 31 Dec 2007 13:56:47 -0800 Subject: configfs: Remove EXPERIMENTAL configfs has been alive and kicking for a while now. It underpins some non-EXPERIMENTAL subsystems, such as OCFS2's cluster stack. Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/Kconfig b/fs/Kconfig index 16598a417423..ad63dfd6d76d 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -1022,8 +1022,8 @@ config HUGETLB_PAGE def_bool HUGETLBFS config CONFIGFS_FS - tristate "Userspace-driven configuration filesystem (EXPERIMENTAL)" - depends on SYSFS && EXPERIMENTAL + tristate "Userspace-driven configuration filesystem" + depends on SYSFS help configfs is a ram-based filesystem that provides the converse of sysfs's functionality. Where sysfs is a filesystem-based -- cgit v1.2.3-59-g8ed1b From ba611edfe406be745be95c332990c8e908c026c3 Mon Sep 17 00:00:00 2001 From: Joonwoo Park Date: Wed, 26 Dec 2007 12:09:57 +0900 Subject: configfs: dir.c fix possible recursive locking configfs_register_subsystem() with default_groups triggers recursive locking. it seems that mutex_lock_nested is needed. ============================================= [ INFO: possible recursive locking detected ] 2.6.24-rc6 #141 --------------------------------------------- swapper/1 is trying to acquire lock: (&sb->s_type->i_mutex_key#3){--..}, at: [] configfs_attach_group+0x4f/0x190 but task is already holding lock: (&sb->s_type->i_mutex_key#3){--..}, at: [] configfs_register_subsystem+0x55/0x130 other info that might help us debug this: 1 lock held by swapper/1: #0: (&sb->s_type->i_mutex_key#3){--..}, at: [] configfs_register_subsystem+0x55/0x130 stack backtrace: Pid: 1, comm: swapper Not tainted 2.6.24-rc6 #141 [] show_trace_log_lvl+0x1a/0x30 [] show_trace+0x12/0x20 [] dump_stack+0x6e/0x80 [] __lock_acquire+0xe62/0x1120 [] lock_acquire+0x82/0xa0 [] mutex_lock_nested+0x98/0x2e0 [] configfs_attach_group+0x4f/0x190 [] configfs_register_subsystem+0xc6/0x130 [] init_netconsole+0x2b6/0x300 [] kernel_init+0x142/0x320 [] kernel_thread_helper+0x7/0x14 ======================= Signed-off-by: Joonwoo Park Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/configfs/dir.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c index 50ed691098bc..a48dc7dd8765 100644 --- a/fs/configfs/dir.c +++ b/fs/configfs/dir.c @@ -546,7 +546,7 @@ static int populate_groups(struct config_group *group) * That said, taking our i_mutex is closer to mkdir * emulation, and shouldn't hurt. */ - mutex_lock(&dentry->d_inode->i_mutex); + mutex_lock_nested(&dentry->d_inode->i_mutex, I_MUTEX_CHILD); for (i = 0; group->default_groups[i]; i++) { new_group = group->default_groups[i]; @@ -1405,7 +1405,8 @@ int configfs_register_subsystem(struct configfs_subsystem *subsys) sd = configfs_sb->s_root->d_fsdata; link_group(to_config_group(sd->s_element), group); - mutex_lock(&configfs_sb->s_root->d_inode->i_mutex); + mutex_lock_nested(&configfs_sb->s_root->d_inode->i_mutex, + I_MUTEX_PARENT); name.name = group->cg_item.ci_name; name.len = strlen(name.name); -- cgit v1.2.3-59-g8ed1b From 116ba5d5ea1a5789a8c14b1087014007cada363b Mon Sep 17 00:00:00 2001 From: Joonwoo Park Date: Wed, 26 Dec 2007 12:09:57 +0900 Subject: configfs: file.c fix possible recursive locking configfs_register_subsystem() with default_groups triggers recursive locking. it seems that mutex_lock_nested is needed. ============================================= [ INFO: possible recursive locking detected ] 2.6.24-rc6 #145 --------------------------------------------- swapper/1 is trying to acquire lock: (&sb->s_type->i_mutex_key#3){--..}, at: [] configfs_add_file+0x2e/0x70 but task is already holding lock: (&sb->s_type->i_mutex_key#3){--..}, at: [] configfs_register_subsystem+0x55/0x130 other info that might help us debug this: 1 lock held by swapper/1: #0: (&sb->s_type->i_mutex_key#3){--..}, at: [] configfs_register_subsystem+0x55/0x130 stack backtrace: Pid: 1, comm: swapper Not tainted 2.6.24-rc6 #145 [] show_trace_log_lvl+0x1a/0x30 [] show_trace+0x12/0x20 [] dump_stack+0x6e/0x80 [] __lock_acquire+0xe62/0x1120 [] lock_acquire+0x82/0xa0 [] mutex_lock_nested+0x98/0x2e0 [] configfs_add_file+0x2e/0x70 [] configfs_create_file+0x2c/0x40 [] configfs_attach_item+0x139/0x220 [] configfs_attach_group+0x14/0x140 [] configfs_attach_group+0xc9/0x140 [] configfs_register_subsystem+0xc6/0x130 [] init_netconsole+0x2b6/0x300 [] kernel_init+0x142/0x320 [] kernel_thread_helper+0x7/0x14 ======================= Signed-off-by: Joonwoo Park Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/configfs/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/configfs/file.c b/fs/configfs/file.c index a3658f9a082c..397cb503a180 100644 --- a/fs/configfs/file.c +++ b/fs/configfs/file.c @@ -320,7 +320,7 @@ int configfs_add_file(struct dentry * dir, const struct configfs_attribute * att umode_t mode = (attr->ca_mode & S_IALLUGO) | S_IFREG; int error = 0; - mutex_lock(&dir->d_inode->i_mutex); + mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_NORMAL); error = configfs_make_dirent(parent_sd, NULL, (void *) attr, mode, type); mutex_unlock(&dir->d_inode->i_mutex); -- cgit v1.2.3-59-g8ed1b From 7ec373cf33533af6c50828a62f6b305c2d7fa931 Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Wed, 23 Jan 2008 16:54:48 -0800 Subject: ocfs2: document access rules for blocked_lock_list ocfs2_super->blocked_lock_list and ocfs2_super->blocked_lock_count have some usage restrictions which aren't immediately obvious to anyone reading the code. It's a good idea to document this so that we avoid making costly mistakes in the future. Signed-off-by: Mark Fasheh --- fs/ocfs2/ocfs2.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h index 22e334d125d0..d08480580470 100644 --- a/fs/ocfs2/ocfs2.h +++ b/fs/ocfs2/ocfs2.h @@ -262,6 +262,12 @@ struct ocfs2_super unsigned long dc_wake_sequence; unsigned long dc_work_sequence; + /* + * Any thread can add locks to the list, but the downconvert + * thread is the only one allowed to remove locks. Any change + * to this rule requires updating + * ocfs2_downconvert_thread_do_work(). + */ struct list_head blocked_lock_list; unsigned long blocked_lock_count; -- cgit v1.2.3-59-g8ed1b From 2fe5c1d7eb88830b09c863a4b5b3279dc120f3af Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Wed, 23 Jan 2008 18:35:31 -0800 Subject: ocfs2: clean up bh null checks If we know a buffer_head is non-null, then brelse() is unnecessary and put_bh() can be used instead. Also, an explicit check for NULL is unnecessary when using brelse(). This patch only covers buffer_head_io.c and resize.c, which have recently added code which exhibits this problem. Signed-off-by: Mark Fasheh --- fs/ocfs2/buffer_head_io.c | 6 +++--- fs/ocfs2/resize.c | 17 +++++------------ 2 files changed, 8 insertions(+), 15 deletions(-) diff --git a/fs/ocfs2/buffer_head_io.c b/fs/ocfs2/buffer_head_io.c index 31aa61dc777b..f136639f5b41 100644 --- a/fs/ocfs2/buffer_head_io.c +++ b/fs/ocfs2/buffer_head_io.c @@ -79,7 +79,7 @@ int ocfs2_write_block(struct ocfs2_super *osb, struct buffer_head *bh, * information for this bh as it's not marked locally * uptodate. */ ret = -EIO; - brelse(bh); + put_bh(bh); } mutex_unlock(&OCFS2_I(inode)->ip_io_mutex); @@ -256,7 +256,7 @@ int ocfs2_read_blocks(struct ocfs2_super *osb, u64 block, int nr, * for this bh as it's not marked locally * uptodate. */ status = -EIO; - brelse(bh); + put_bh(bh); bhs[i] = NULL; continue; } @@ -334,7 +334,7 @@ int ocfs2_write_super_or_backup(struct ocfs2_super *osb, if (!buffer_uptodate(bh)) { ret = -EIO; - brelse(bh); + put_bh(bh); } out: diff --git a/fs/ocfs2/resize.c b/fs/ocfs2/resize.c index 7791309bb258..37835ffcb039 100644 --- a/fs/ocfs2/resize.c +++ b/fs/ocfs2/resize.c @@ -257,8 +257,7 @@ static void ocfs2_update_super_and_backups(struct inode *inode, ret = update_backups(inode, clusters, super_bh->b_data); out: - if (super_bh) - brelse(super_bh); + brelse(super_bh); if (ret) printk(KERN_WARNING "ocfs2: Failed to update super blocks on %s" " during fs resize. This condition is not fatal," @@ -380,11 +379,8 @@ int ocfs2_group_extend(struct inode * inode, int new_clusters) out_commit: ocfs2_commit_trans(osb, handle); out_unlock: - if (group_bh) - brelse(group_bh); - - if (main_bm_bh) - brelse(main_bm_bh); + brelse(group_bh); + brelse(main_bm_bh); ocfs2_inode_unlock(main_bm_inode, 1); @@ -623,11 +619,8 @@ int ocfs2_group_add(struct inode *inode, struct ocfs2_new_group_input *input) out_commit: ocfs2_commit_trans(osb, handle); out_unlock: - if (group_bh) - brelse(group_bh); - - if (main_bm_bh) - brelse(main_bm_bh); + brelse(group_bh); + brelse(main_bm_bh); ocfs2_inode_unlock(main_bm_inode, 1); -- cgit v1.2.3-59-g8ed1b From b1aa5301b9f88a4891061650c591fb8fe1c1d1da Mon Sep 17 00:00:00 2001 From: Stephen Smalley Date: Fri, 25 Jan 2008 13:03:42 -0500 Subject: selinux: fix labeling of /proc/net inodes The proc net rewrite had a side effect on selinux, leading it to mislabel the /proc/net inodes, thereby leading to incorrect denials. Fix security_genfs_sid to ignore extra leading / characters in the path supplied by selinux_proc_get_sid since we now get "//net/..." rather than "/net/...". Signed-off-by: Stephen Smalley Signed-off-by: James Morris --- security/selinux/ss/services.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c index f83b19daed16..4bf715d4cf29 100644 --- a/security/selinux/ss/services.c +++ b/security/selinux/ss/services.c @@ -1744,6 +1744,9 @@ int security_genfs_sid(const char *fstype, struct ocontext *c; int rc = 0, cmp = 0; + while (path[0] == '/' && path[1] == '/') + path++; + POLICY_RDLOCK; for (genfs = policydb.genfs; genfs; genfs = genfs->next) { -- cgit v1.2.3-59-g8ed1b From 661ca0da3e1fa60c9e56f995fd83772ffa9ffe90 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Sat, 26 Jan 2008 14:10:36 +0100 Subject: [S390] Cleanup in Documentation/kernel-parameters.txt. Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- Documentation/kernel-parameters.txt | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 65de5ba7b74c..d29b6d926a42 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -370,8 +370,6 @@ and is between 256 and 4096 characters. It is defined in the file configured. Potentially dangerous and should only be used if you are entirely sure of the consequences. - chandev= [HW,NET] Generic channel device initialisation - checkreqprot [SELINUX] Set initial checkreqprot flag value. Format: { "0" | "1" } See security/selinux/Kconfig help text. @@ -382,6 +380,12 @@ and is between 256 and 4096 characters. It is defined in the file Value can be changed at runtime via /selinux/checkreqprot. + cio_ignore= [S390] + See Documentation/s390/CommonIO for details. + + cio_msg= [S390] + See Documentation/s390/CommonIO for details. + clock= [BUGS=X86-32, HW] gettimeofday clocksource override. [Deprecated] Forces specified clocksource (if available) to be used -- cgit v1.2.3-59-g8ed1b From 14ff56bbb3422cc465a12e81f5e1b5f06168aeda Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Sat, 26 Jan 2008 14:10:37 +0100 Subject: [S390] cio: Dump ccw device information in case of timeout. Information about a ccw device will be dumped in case of a ccw timeout. This can be enabled with the kernel parameter ccw_timeout_log. Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- Documentation/kernel-parameters.txt | 3 +++ Documentation/s390/CommonIO | 5 ++++ drivers/s390/cio/device_fsm.c | 50 +++++++++++++++++++++++++++++++++++++ 3 files changed, 58 insertions(+) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index d29b6d926a42..880f882160e2 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -370,6 +370,9 @@ and is between 256 and 4096 characters. It is defined in the file configured. Potentially dangerous and should only be used if you are entirely sure of the consequences. + ccw_timeout_log [S390] + See Documentation/s390/CommonIO for details. + checkreqprot [SELINUX] Set initial checkreqprot flag value. Format: { "0" | "1" } See security/selinux/Kconfig help text. diff --git a/Documentation/s390/CommonIO b/Documentation/s390/CommonIO index 86320aa3fb0b..8fbc0a852870 100644 --- a/Documentation/s390/CommonIO +++ b/Documentation/s390/CommonIO @@ -4,6 +4,11 @@ S/390 common I/O-Layer - command line parameters, procfs and debugfs entries Command line parameters ----------------------- +* ccw_timeout_log + + Enable logging of debug information in case of ccw device timeouts. + + * cio_msg = yes | no Determines whether information on found devices and sensed device diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c index bfad421cda66..31c0f7885161 100644 --- a/drivers/s390/cio/device_fsm.c +++ b/drivers/s390/cio/device_fsm.c @@ -25,6 +25,8 @@ #include "ioasm.h" #include "chp.h" +static int timeout_log_enabled; + int device_is_online(struct subchannel *sch) { @@ -82,6 +84,52 @@ int device_trigger_verify(struct subchannel *sch) return 0; } +static int __init ccw_timeout_log_setup(char *unused) +{ + timeout_log_enabled = 1; + return 1; +} + +__setup("ccw_timeout_log", ccw_timeout_log_setup); + +static void ccw_timeout_log(struct ccw_device *cdev) +{ + struct schib schib; + struct subchannel *sch; + int cc; + + sch = to_subchannel(cdev->dev.parent); + cc = stsch(sch->schid, &schib); + + printk(KERN_WARNING "cio: ccw device timeout occurred at %llx, " + "device information:\n", get_clock()); + printk(KERN_WARNING "cio: orb:\n"); + print_hex_dump(KERN_WARNING, "cio: ", DUMP_PREFIX_NONE, 16, 1, + &sch->orb, sizeof(sch->orb), 0); + printk(KERN_WARNING "cio: ccw device bus id: %s\n", cdev->dev.bus_id); + printk(KERN_WARNING "cio: subchannel bus id: %s\n", sch->dev.bus_id); + printk(KERN_WARNING "cio: subchannel lpm: %02x, opm: %02x, " + "vpm: %02x\n", sch->lpm, sch->opm, sch->vpm); + + if ((void *)(addr_t)sch->orb.cpa == &sch->sense_ccw || + (void *)(addr_t)sch->orb.cpa == cdev->private->iccws) + printk(KERN_WARNING "cio: last channel program (intern):\n"); + else + printk(KERN_WARNING "cio: last channel program:\n"); + + print_hex_dump(KERN_WARNING, "cio: ", DUMP_PREFIX_NONE, 16, 1, + (void *)(addr_t)sch->orb.cpa, sizeof(struct ccw1), 0); + printk(KERN_WARNING "cio: ccw device state: %d\n", + cdev->private->state); + printk(KERN_WARNING "cio: store subchannel returned: cc=%d\n", cc); + printk(KERN_WARNING "cio: schib:\n"); + print_hex_dump(KERN_WARNING, "cio: ", DUMP_PREFIX_NONE, 16, 1, + &schib, sizeof(schib), 0); + printk(KERN_WARNING "cio: ccw device flags:\n"); + print_hex_dump(KERN_WARNING, "cio: ", DUMP_PREFIX_NONE, 16, 1, + &cdev->private->flags, sizeof(cdev->private->flags), 0); +} + /* * Timeout function. It just triggers a DEV_EVENT_TIMEOUT. */ @@ -92,6 +140,8 @@ ccw_device_timeout(unsigned long data) cdev = (struct ccw_device *) data; spin_lock_irq(cdev->ccwlock); + if (timeout_log_enabled) + ccw_timeout_log(cdev); dev_fsm_event(cdev, DEV_EVENT_TIMEOUT); spin_unlock_irq(cdev->ccwlock); } -- cgit v1.2.3-59-g8ed1b From 084325d80418adf4d75b10a9ceff1348f2e09163 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Sat, 26 Jan 2008 14:10:38 +0100 Subject: [S390] cio: Use helpers instead of container_of(). - Introduce to_cssdriver. - Use to_xxx instead of container_of where possible. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/ccwgroup.c | 4 ++-- drivers/s390/cio/css.c | 6 +++--- drivers/s390/cio/css.h | 2 ++ 3 files changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c index 5baa517c3b66..b3e2c16caa41 100644 --- a/drivers/s390/cio/ccwgroup.c +++ b/drivers/s390/cio/ccwgroup.c @@ -35,8 +35,8 @@ ccwgroup_bus_match (struct device * dev, struct device_driver * drv) struct ccwgroup_device *gdev; struct ccwgroup_driver *gdrv; - gdev = container_of(dev, struct ccwgroup_device, dev); - gdrv = container_of(drv, struct ccwgroup_driver, driver); + gdev = to_ccwgroupdev(dev); + gdrv = to_ccwgroupdrv(drv); if (gdev->creator_id == gdrv->driver_id) return 1; diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c index c3df2cd009a4..bc2f8fa576a3 100644 --- a/drivers/s390/cio/css.c +++ b/drivers/s390/cio/css.c @@ -787,8 +787,8 @@ int sch_is_pseudo_sch(struct subchannel *sch) static int css_bus_match (struct device *dev, struct device_driver *drv) { - struct subchannel *sch = container_of (dev, struct subchannel, dev); - struct css_driver *driver = container_of (drv, struct css_driver, drv); + struct subchannel *sch = to_subchannel(dev); + struct css_driver *driver = to_cssdriver(drv); if (sch->st == driver->subchannel_type) return 1; @@ -802,7 +802,7 @@ css_probe (struct device *dev) struct subchannel *sch; sch = to_subchannel(dev); - sch->driver = container_of (dev->driver, struct css_driver, drv); + sch->driver = to_cssdriver(dev->driver); return (sch->driver->probe ? sch->driver->probe(sch) : 0); } diff --git a/drivers/s390/cio/css.h b/drivers/s390/cio/css.h index 81215ef32435..1d8306cc74c4 100644 --- a/drivers/s390/cio/css.h +++ b/drivers/s390/cio/css.h @@ -134,6 +134,8 @@ struct css_driver { void (*shutdown)(struct subchannel *); }; +#define to_cssdriver(n) container_of(n, struct css_driver, drv) + /* * all css_drivers have the css_bus_type */ -- cgit v1.2.3-59-g8ed1b From 602b20f2bf335d0d5fce11cb2ade22aa74e7ba25 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Sat, 26 Jan 2008 14:10:39 +0100 Subject: [S390] cio: css_driver: Use consistent parameters. Make all callbacks in css_driver take a struct subchannel (and not a struct device). Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/chsc.c | 16 ++++++++-------- drivers/s390/cio/cio.c | 4 ++-- drivers/s390/cio/css.c | 2 +- drivers/s390/cio/css.h | 8 ++++---- drivers/s390/cio/device.c | 38 ++++++++++++++++++++++++-------------- drivers/s390/cio/device.h | 1 - drivers/s390/cio/device_fsm.c | 19 +------------------ 7 files changed, 40 insertions(+), 48 deletions(-) diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c index 597c0c76a2ad..44a2ea40806e 100644 --- a/drivers/s390/cio/chsc.c +++ b/drivers/s390/cio/chsc.c @@ -132,7 +132,7 @@ static void terminate_internal_io(struct subchannel *sch) device_set_intretry(sch); /* Call handler. */ if (sch->driver && sch->driver->termination) - sch->driver->termination(&sch->dev); + sch->driver->termination(sch); } static int @@ -172,12 +172,12 @@ s390_subchannel_remove_chpid(struct device *dev, void *data) terminate_internal_io(sch); /* Re-start path verification. */ if (sch->driver && sch->driver->verify) - sch->driver->verify(&sch->dev); + sch->driver->verify(sch); } } else { /* trigger path verification. */ if (sch->driver && sch->driver->verify) - sch->driver->verify(&sch->dev); + sch->driver->verify(sch); else if (sch->lpm == mask) goto out_unreg; } @@ -279,7 +279,7 @@ __s390_process_res_acc(struct subchannel_id schid, void *data) if (!old_lpm && sch->lpm) device_trigger_reprobe(sch); else if (sch->driver && sch->driver->verify) - sch->driver->verify(&sch->dev); + sch->driver->verify(sch); out: spin_unlock_irq(sch->lock); put_device(&sch->dev); @@ -549,7 +549,7 @@ __chp_add(struct subchannel_id schid, void *data) | mask) & sch->opm; if (sch->driver && sch->driver->verify) - sch->driver->verify(&sch->dev); + sch->driver->verify(sch); spin_unlock_irq(sch->lock); put_device(&sch->dev); @@ -589,7 +589,7 @@ static void __s390_subchannel_vary_chpid(struct subchannel *sch, if (!old_lpm) device_trigger_reprobe(sch); else if (sch->driver && sch->driver->verify) - sch->driver->verify(&sch->dev); + sch->driver->verify(sch); break; } sch->opm &= ~mask; @@ -603,13 +603,13 @@ static void __s390_subchannel_vary_chpid(struct subchannel *sch, terminate_internal_io(sch); /* Re-start path verification. */ if (sch->driver && sch->driver->verify) - sch->driver->verify(&sch->dev); + sch->driver->verify(sch); } } else if (!sch->lpm) { if (device_trigger_verify(sch) != 0) css_schedule_eval(sch->schid); } else if (sch->driver && sch->driver->verify) - sch->driver->verify(&sch->dev); + sch->driver->verify(sch); break; } spin_unlock_irqrestore(sch->lock, flags); diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c index 46905345159e..469b00774c5e 100644 --- a/drivers/s390/cio/cio.c +++ b/drivers/s390/cio/cio.c @@ -147,7 +147,7 @@ cio_tpi(void) spin_lock(sch->lock); memcpy (&sch->schib.scsw, &irb->scsw, sizeof (struct scsw)); if (sch->driver && sch->driver->irq) - sch->driver->irq(&sch->dev); + sch->driver->irq(sch); spin_unlock(sch->lock); irq_exit (); _local_bh_enable(); @@ -680,7 +680,7 @@ do_IRQ (struct pt_regs *regs) sizeof (irb->scsw)); /* Call interrupt handler if there is one. */ if (sch->driver && sch->driver->irq) - sch->driver->irq(&sch->dev); + sch->driver->irq(sch); } if (sch) spin_unlock(sch->lock); diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c index bc2f8fa576a3..614cc694184e 100644 --- a/drivers/s390/cio/css.c +++ b/drivers/s390/cio/css.c @@ -293,7 +293,7 @@ static int css_evaluate_known_subchannel(struct subchannel *sch, int slow) action = UNREGISTER; if (sch->driver && sch->driver->notify) { spin_unlock_irqrestore(sch->lock, flags); - ret = sch->driver->notify(&sch->dev, event); + ret = sch->driver->notify(sch, event); spin_lock_irqsave(sch->lock, flags); if (ret) action = NONE; diff --git a/drivers/s390/cio/css.h b/drivers/s390/cio/css.h index 1d8306cc74c4..32acd24a407c 100644 --- a/drivers/s390/cio/css.h +++ b/drivers/s390/cio/css.h @@ -125,10 +125,10 @@ struct subchannel; struct css_driver { unsigned int subchannel_type; struct device_driver drv; - void (*irq)(struct device *); - int (*notify)(struct device *, int); - void (*verify)(struct device *); - void (*termination)(struct device *); + void (*irq)(struct subchannel *); + int (*notify)(struct subchannel *, int); + void (*verify)(struct subchannel *); + void (*termination)(struct subchannel *); int (*probe)(struct subchannel *); int (*remove)(struct subchannel *); void (*shutdown)(struct subchannel *); diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index 74f6b539974a..000c64129ed8 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -115,11 +115,12 @@ static int ccw_uevent(struct device *dev, struct kobj_uevent_env *env) struct bus_type ccw_bus_type; -static int io_subchannel_probe (struct subchannel *); -static int io_subchannel_remove (struct subchannel *); -static int io_subchannel_notify(struct device *, int); -static void io_subchannel_verify(struct device *); -static void io_subchannel_ioterm(struct device *); +static void io_subchannel_irq(struct subchannel *); +static int io_subchannel_probe(struct subchannel *); +static int io_subchannel_remove(struct subchannel *); +static int io_subchannel_notify(struct subchannel *, int); +static void io_subchannel_verify(struct subchannel *); +static void io_subchannel_ioterm(struct subchannel *); static void io_subchannel_shutdown(struct subchannel *); static struct css_driver io_subchannel_driver = { @@ -1096,6 +1097,18 @@ out: put_device(&cdev->dev); } +static void io_subchannel_irq(struct subchannel *sch) +{ + struct ccw_device *cdev; + + cdev = sch->dev.driver_data; + + CIO_TRACE_EVENT(3, "IRQ"); + CIO_TRACE_EVENT(3, sch->dev.bus_id); + if (cdev) + dev_fsm_event(cdev, DEV_EVENT_INTERRUPT); +} + static int io_subchannel_probe (struct subchannel *sch) { @@ -1183,12 +1196,11 @@ io_subchannel_remove (struct subchannel *sch) return 0; } -static int -io_subchannel_notify(struct device *dev, int event) +static int io_subchannel_notify(struct subchannel *sch, int event) { struct ccw_device *cdev; - cdev = dev->driver_data; + cdev = sch->dev.driver_data; if (!cdev) return 0; if (!cdev->drv) @@ -1198,22 +1210,20 @@ io_subchannel_notify(struct device *dev, int event) return cdev->drv->notify ? cdev->drv->notify(cdev, event) : 0; } -static void -io_subchannel_verify(struct device *dev) +static void io_subchannel_verify(struct subchannel *sch) { struct ccw_device *cdev; - cdev = dev->driver_data; + cdev = sch->dev.driver_data; if (cdev) dev_fsm_event(cdev, DEV_EVENT_VERIFY); } -static void -io_subchannel_ioterm(struct device *dev) +static void io_subchannel_ioterm(struct subchannel *sch) { struct ccw_device *cdev; - cdev = dev->driver_data; + cdev = sch->dev.driver_data; if (!cdev) return; /* Internal I/O will be retried by the interrupt handler. */ diff --git a/drivers/s390/cio/device.h b/drivers/s390/cio/device.h index 0d4089600439..6183731fb9a2 100644 --- a/drivers/s390/cio/device.h +++ b/drivers/s390/cio/device.h @@ -74,7 +74,6 @@ extern struct workqueue_struct *ccw_device_notify_work; extern wait_queue_head_t ccw_device_init_wq; extern atomic_t ccw_device_init_count; -void io_subchannel_irq (struct device *pdev); void io_subchannel_recog_done(struct ccw_device *cdev); int ccw_device_cancel_halt_clear(struct ccw_device *); diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c index 31c0f7885161..baca6c6c9855 100644 --- a/drivers/s390/cio/device_fsm.c +++ b/drivers/s390/cio/device_fsm.c @@ -399,7 +399,7 @@ ccw_device_oper_notify(struct work_struct *work) sch = to_subchannel(cdev->dev.parent); if (sch->driver && sch->driver->notify) { spin_unlock_irqrestore(cdev->ccwlock, flags); - ret = sch->driver->notify(&sch->dev, CIO_OPER); + ret = sch->driver->notify(sch, CIO_OPER); spin_lock_irqsave(cdev->ccwlock, flags); } else ret = 0; @@ -1273,21 +1273,4 @@ fsm_func_t *dev_jumptable[NR_DEV_STATES][NR_DEV_EVENTS] = { }, }; -/* - * io_subchannel_irq is called for "real" interrupts or for status - * pending conditions on msch. - */ -void -io_subchannel_irq (struct device *pdev) -{ - struct ccw_device *cdev; - - cdev = to_subchannel(pdev)->dev.driver_data; - - CIO_TRACE_EVENT (3, "IRQ"); - CIO_TRACE_EVENT (3, pdev->bus_id); - if (cdev) - dev_fsm_event(cdev, DEV_EVENT_INTERRUPT); -} - EXPORT_SYMBOL_GPL(ccw_device_set_timeout); -- cgit v1.2.3-59-g8ed1b From 98c13c283a4e8b7f844f1f470abd7c756248fcc4 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Sat, 26 Jan 2008 14:10:40 +0100 Subject: [S390] cio: Reset sch->driver. sch->driver needs to be reset to NULL on failed probe and after remove. We also need to check for sch->driver on shutdown. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/css.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c index 614cc694184e..f558686a66dd 100644 --- a/drivers/s390/cio/css.c +++ b/drivers/s390/cio/css.c @@ -796,32 +796,36 @@ css_bus_match (struct device *dev, struct device_driver *drv) return 0; } -static int -css_probe (struct device *dev) +static int css_probe(struct device *dev) { struct subchannel *sch; + int ret; sch = to_subchannel(dev); sch->driver = to_cssdriver(dev->driver); - return (sch->driver->probe ? sch->driver->probe(sch) : 0); + ret = sch->driver->probe ? sch->driver->probe(sch) : 0; + if (ret) + sch->driver = NULL; + return ret; } -static int -css_remove (struct device *dev) +static int css_remove(struct device *dev) { struct subchannel *sch; + int ret; sch = to_subchannel(dev); - return (sch->driver->remove ? sch->driver->remove(sch) : 0); + ret = sch->driver->remove ? sch->driver->remove(sch) : 0; + sch->driver = NULL; + return ret; } -static void -css_shutdown (struct device *dev) +static void css_shutdown(struct device *dev) { struct subchannel *sch; sch = to_subchannel(dev); - if (sch->driver->shutdown) + if (sch->driver && sch->driver->shutdown) sch->driver->shutdown(sch); } -- cgit v1.2.3-59-g8ed1b From 25b7bb5838ab81b68a9de72df577103d8b4aba3c Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Sat, 26 Jan 2008 14:10:41 +0100 Subject: [S390] cio: Add css_driver_{register,unregister}. Add wrapper functions for driver_register and driver_unregister so that css drivers don't need to muck with struct device_driver directly. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/css.c | 27 +++++++++++++++++++++++++++ drivers/s390/cio/css.h | 4 ++++ drivers/s390/cio/device.c | 10 ++++------ 3 files changed, 35 insertions(+), 6 deletions(-) diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c index f558686a66dd..7d887f88bb73 100644 --- a/drivers/s390/cio/css.c +++ b/drivers/s390/cio/css.c @@ -837,6 +837,33 @@ struct bus_type css_bus_type = { .shutdown = css_shutdown, }; +/** + * css_driver_register - register a css driver + * @cdrv: css driver to register + * + * This is mainly a wrapper around driver_register that sets name + * and bus_type in the embedded struct device_driver correctly. + */ +int css_driver_register(struct css_driver *cdrv) +{ + cdrv->drv.name = cdrv->name; + cdrv->drv.bus = &css_bus_type; + return driver_register(&cdrv->drv); +} +EXPORT_SYMBOL_GPL(css_driver_register); + +/** + * css_driver_unregister - unregister a css driver + * @cdrv: css driver to unregister + * + * This is a wrapper around driver_unregister. + */ +void css_driver_unregister(struct css_driver *cdrv) +{ + driver_unregister(&cdrv->drv); +} +EXPORT_SYMBOL_GPL(css_driver_unregister); + subsys_initcall(init_channel_subsystem); MODULE_LICENSE("GPL"); diff --git a/drivers/s390/cio/css.h b/drivers/s390/cio/css.h index 32acd24a407c..c9fd600411c4 100644 --- a/drivers/s390/cio/css.h +++ b/drivers/s390/cio/css.h @@ -132,6 +132,7 @@ struct css_driver { int (*probe)(struct subchannel *); int (*remove)(struct subchannel *); void (*shutdown)(struct subchannel *); + const char *name; }; #define to_cssdriver(n) container_of(n, struct css_driver, drv) @@ -141,6 +142,9 @@ struct css_driver { */ extern struct bus_type css_bus_type; +extern int css_driver_register(struct css_driver *); +extern void css_driver_unregister(struct css_driver *); + extern void css_sch_device_unregister(struct subchannel *); extern struct subchannel * get_subchannel_by_schid(struct subchannel_id); extern int css_init_done; diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index 000c64129ed8..7bccca9684e5 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -125,10 +125,7 @@ static void io_subchannel_shutdown(struct subchannel *); static struct css_driver io_subchannel_driver = { .subchannel_type = SUBCHANNEL_TYPE_IO, - .drv = { - .name = "io_subchannel", - .bus = &css_bus_type, - }, + .name = "io_subchannel", .irq = io_subchannel_irq, .notify = io_subchannel_notify, .verify = io_subchannel_verify, @@ -167,7 +164,8 @@ init_ccw_bus_type (void) if ((ret = bus_register (&ccw_bus_type))) goto out_err; - if ((ret = driver_register(&io_subchannel_driver.drv))) + ret = css_driver_register(&io_subchannel_driver); + if (ret) goto out_err; wait_event(ccw_device_init_wq, @@ -187,7 +185,7 @@ out_err: static void __exit cleanup_ccw_bus_type (void) { - driver_unregister(&io_subchannel_driver.drv); + css_driver_unregister(&io_subchannel_driver); bus_unregister(&ccw_bus_type); destroy_workqueue(ccw_device_notify_work); destroy_workqueue(ccw_device_work); -- cgit v1.2.3-59-g8ed1b From bc698bcf8897363732226dc9ecba044771679996 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Sat, 26 Jan 2008 14:10:42 +0100 Subject: [S390] cio: Cleanup debug feature usage. Cleanup cio_debug.h. Also make CIO_DEBUG add the "cio:" prefix to the printk string so that it isn't needed for the debug feature. Fix outdated comments for cio_debug_init() and clean it up. Enlarge cio_crw to the same size as cio_msg so we may actually find some relevant information there. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/cio.c | 38 ++++++++++++++++++-------------------- drivers/s390/cio/cio_debug.h | 22 +++++++++++----------- drivers/s390/cio/device_fsm.c | 8 ++++---- 3 files changed, 33 insertions(+), 35 deletions(-) diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c index 469b00774c5e..cd5475b82420 100644 --- a/drivers/s390/cio/cio.c +++ b/drivers/s390/cio/cio.c @@ -56,39 +56,37 @@ __setup ("cio_msg=", cio_setup); /* * Function: cio_debug_init - * Initializes three debug logs (under /proc/s390dbf) for common I/O: - * - cio_msg logs the messages which are printk'ed when CONFIG_DEBUG_IO is on + * Initializes three debug logs for common I/O: + * - cio_msg logs generic cio messages * - cio_trace logs the calling of different functions - * - cio_crw logs the messages which are printk'ed when CONFIG_DEBUG_CRW is on - * debug levels depend on CONFIG_DEBUG_IO resp. CONFIG_DEBUG_CRW + * - cio_crw logs machine check related cio messages */ -static int __init -cio_debug_init (void) +static int __init cio_debug_init(void) { - cio_debug_msg_id = debug_register ("cio_msg", 16, 4, 16*sizeof (long)); + cio_debug_msg_id = debug_register("cio_msg", 16, 4, 16 * sizeof(long)); if (!cio_debug_msg_id) goto out_unregister; - debug_register_view (cio_debug_msg_id, &debug_sprintf_view); - debug_set_level (cio_debug_msg_id, 2); - cio_debug_trace_id = debug_register ("cio_trace", 16, 4, 16); + debug_register_view(cio_debug_msg_id, &debug_sprintf_view); + debug_set_level(cio_debug_msg_id, 2); + cio_debug_trace_id = debug_register("cio_trace", 16, 4, 16); if (!cio_debug_trace_id) goto out_unregister; - debug_register_view (cio_debug_trace_id, &debug_hex_ascii_view); - debug_set_level (cio_debug_trace_id, 2); - cio_debug_crw_id = debug_register ("cio_crw", 4, 4, 16*sizeof (long)); + debug_register_view(cio_debug_trace_id, &debug_hex_ascii_view); + debug_set_level(cio_debug_trace_id, 2); + cio_debug_crw_id = debug_register("cio_crw", 16, 4, 16 * sizeof(long)); if (!cio_debug_crw_id) goto out_unregister; - debug_register_view (cio_debug_crw_id, &debug_sprintf_view); - debug_set_level (cio_debug_crw_id, 2); + debug_register_view(cio_debug_crw_id, &debug_sprintf_view); + debug_set_level(cio_debug_crw_id, 4); return 0; out_unregister: if (cio_debug_msg_id) - debug_unregister (cio_debug_msg_id); + debug_unregister(cio_debug_msg_id); if (cio_debug_trace_id) - debug_unregister (cio_debug_trace_id); + debug_unregister(cio_debug_trace_id); if (cio_debug_crw_id) - debug_unregister (cio_debug_crw_id); + debug_unregister(cio_debug_crw_id); printk(KERN_WARNING"cio: could not initialize debugging\n"); return -1; } @@ -567,7 +565,7 @@ cio_validate_subchannel (struct subchannel *sch, struct subchannel_id schid) */ if (sch->st != 0) { CIO_DEBUG(KERN_INFO, 0, - "cio: Subchannel 0.%x.%04x reports " + "Subchannel 0.%x.%04x reports " "non-I/O subchannel type %04X\n", sch->schid.ssid, sch->schid.sch_no, sch->st); /* We stop here for non-io subchannels. */ @@ -600,7 +598,7 @@ cio_validate_subchannel (struct subchannel *sch, struct subchannel_id schid) sch->lpm = sch->schib.pmcw.pam & sch->opm; CIO_DEBUG(KERN_INFO, 0, - "cio: Detected device %04x on subchannel 0.%x.%04X" + "Detected device %04x on subchannel 0.%x.%04X" " - PIM = %02X, PAM = %02X, POM = %02X\n", sch->schib.pmcw.dev, sch->schid.ssid, sch->schid.sch_no, sch->schib.pmcw.pim, diff --git a/drivers/s390/cio/cio_debug.h b/drivers/s390/cio/cio_debug.h index c9bf8989930f..d7429ef6c666 100644 --- a/drivers/s390/cio/cio_debug.h +++ b/drivers/s390/cio/cio_debug.h @@ -8,20 +8,19 @@ extern debug_info_t *cio_debug_msg_id; extern debug_info_t *cio_debug_trace_id; extern debug_info_t *cio_debug_crw_id; -#define CIO_TRACE_EVENT(imp, txt) do { \ +#define CIO_TRACE_EVENT(imp, txt) do { \ debug_text_event(cio_debug_trace_id, imp, txt); \ } while (0) -#define CIO_MSG_EVENT(imp, args...) do { \ - debug_sprintf_event(cio_debug_msg_id, imp , ##args); \ +#define CIO_MSG_EVENT(imp, args...) do { \ + debug_sprintf_event(cio_debug_msg_id, imp , ##args); \ } while (0) -#define CIO_CRW_EVENT(imp, args...) do { \ - debug_sprintf_event(cio_debug_crw_id, imp , ##args); \ +#define CIO_CRW_EVENT(imp, args...) do { \ + debug_sprintf_event(cio_debug_crw_id, imp , ##args); \ } while (0) -static inline void -CIO_HEX_EVENT(int level, void *data, int length) +static inline void CIO_HEX_EVENT(int level, void *data, int length) { if (unlikely(!cio_debug_trace_id)) return; @@ -32,9 +31,10 @@ CIO_HEX_EVENT(int level, void *data, int length) } } -#define CIO_DEBUG(printk_level,event_level,msg...) ({ \ - if (cio_show_msg) printk(printk_level msg); \ - CIO_MSG_EVENT (event_level, msg); \ -}) +#define CIO_DEBUG(printk_level, event_level, msg...) do { \ + if (cio_show_msg) \ + printk(printk_level "cio: " msg); \ + CIO_MSG_EVENT(event_level, msg); \ + } while (0) #endif diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c index baca6c6c9855..8b6be2142c81 100644 --- a/drivers/s390/cio/device_fsm.c +++ b/drivers/s390/cio/device_fsm.c @@ -318,7 +318,7 @@ ccw_device_recog_done(struct ccw_device *cdev, int state) switch (state) { case DEV_STATE_NOT_OPER: CIO_DEBUG(KERN_WARNING, 2, - "cio: SenseID : unknown device %04x on subchannel " + "SenseID : unknown device %04x on subchannel " "0.%x.%04x\n", cdev->private->dev_id.devno, sch->schid.ssid, sch->schid.sch_no); break; @@ -344,7 +344,7 @@ ccw_device_recog_done(struct ccw_device *cdev, int state) } /* Issue device info message. */ CIO_DEBUG(KERN_INFO, 2, - "cio: SenseID : device 0.%x.%04x reports: " + "SenseID : device 0.%x.%04x reports: " "CU Type/Mod = %04X/%02X, Dev Type/Mod = " "%04X/%02X\n", cdev->private->dev_id.ssid, @@ -354,7 +354,7 @@ ccw_device_recog_done(struct ccw_device *cdev, int state) break; case DEV_STATE_BOXED: CIO_DEBUG(KERN_WARNING, 2, - "cio: SenseID : boxed device %04x on subchannel " + "SenseID : boxed device %04x on subchannel " "0.%x.%04x\n", cdev->private->dev_id.devno, sch->schid.ssid, sch->schid.sch_no); break; @@ -439,7 +439,7 @@ ccw_device_done(struct ccw_device *cdev, int state) if (state == DEV_STATE_BOXED) CIO_DEBUG(KERN_WARNING, 2, - "cio: Boxed device %04x on subchannel %04x\n", + "Boxed device %04x on subchannel %04x\n", cdev->private->dev_id.devno, sch->schid.sch_no); if (cdev->private->flags.donotify) { -- cgit v1.2.3-59-g8ed1b From cd6b4f27b9bb2a6a5ec82b96b87c85421257be6c Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Sat, 26 Jan 2008 14:10:43 +0100 Subject: [S390] cio: Introduce subchannel->private. Introduce a private pointer in struct subchannel to store per-subchannel type data (cannot use dev->priv since this is already used for something else). Create a new header io_sch.h for I/O subchannel specific structures and instructions. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/cio.c | 43 ++++++----- drivers/s390/cio/cio.h | 84 ++++++++------------ drivers/s390/cio/css.c | 2 +- drivers/s390/cio/css.h | 58 -------------- drivers/s390/cio/device.c | 16 +++- drivers/s390/cio/device.h | 2 + drivers/s390/cio/device_fsm.c | 13 ++-- drivers/s390/cio/device_id.c | 9 ++- drivers/s390/cio/device_pgid.c | 6 +- drivers/s390/cio/device_status.c | 13 ++-- drivers/s390/cio/io_sch.h | 161 +++++++++++++++++++++++++++++++++++++++ drivers/s390/cio/ioasm.h | 66 ---------------- 12 files changed, 261 insertions(+), 212 deletions(-) create mode 100644 drivers/s390/cio/io_sch.h diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c index cd5475b82420..d0bcebde3fa2 100644 --- a/drivers/s390/cio/cio.c +++ b/drivers/s390/cio/cio.c @@ -28,6 +28,7 @@ #include "css.h" #include "chsc.h" #include "ioasm.h" +#include "io_sch.h" #include "blacklist.h" #include "cio_debug.h" #include "chp.h" @@ -182,33 +183,35 @@ cio_start_key (struct subchannel *sch, /* subchannel structure */ { char dbf_txt[15]; int ccode; + struct orb *orb; - CIO_TRACE_EVENT (4, "stIO"); - CIO_TRACE_EVENT (4, sch->dev.bus_id); + CIO_TRACE_EVENT(4, "stIO"); + CIO_TRACE_EVENT(4, sch->dev.bus_id); + orb = &to_io_private(sch)->orb; /* sch is always under 2G. */ - sch->orb.intparm = (__u32)(unsigned long)sch; - sch->orb.fmt = 1; + orb->intparm = (u32)(addr_t)sch; + orb->fmt = 1; - sch->orb.pfch = sch->options.prefetch == 0; - sch->orb.spnd = sch->options.suspend; - sch->orb.ssic = sch->options.suspend && sch->options.inter; - sch->orb.lpm = (lpm != 0) ? lpm : sch->lpm; + orb->pfch = sch->options.prefetch == 0; + orb->spnd = sch->options.suspend; + orb->ssic = sch->options.suspend && sch->options.inter; + orb->lpm = (lpm != 0) ? lpm : sch->lpm; #ifdef CONFIG_64BIT /* * for 64 bit we always support 64 bit IDAWs with 4k page size only */ - sch->orb.c64 = 1; - sch->orb.i2k = 0; + orb->c64 = 1; + orb->i2k = 0; #endif - sch->orb.key = key >> 4; + orb->key = key >> 4; /* issue "Start Subchannel" */ - sch->orb.cpa = (__u32) __pa (cpa); - ccode = ssch (sch->schid, &sch->orb); + orb->cpa = (__u32) __pa(cpa); + ccode = ssch(sch->schid, orb); /* process condition code */ - sprintf (dbf_txt, "ccode:%d", ccode); - CIO_TRACE_EVENT (4, dbf_txt); + sprintf(dbf_txt, "ccode:%d", ccode); + CIO_TRACE_EVENT(4, dbf_txt); switch (ccode) { case 0: @@ -423,7 +426,7 @@ cio_enable_subchannel (struct subchannel *sch, unsigned int isc) for (retry = 5, ret = 0; retry > 0; retry--) { sch->schib.pmcw.ena = 1; sch->schib.pmcw.isc = isc; - sch->schib.pmcw.intparm = (__u32)(unsigned long)sch; + sch->schib.pmcw.intparm = (u32)(addr_t)sch; ret = cio_modify(sch); if (ret == -ENODEV) break; @@ -696,8 +699,14 @@ do_IRQ (struct pt_regs *regs) #ifdef CONFIG_CCW_CONSOLE static struct subchannel console_subchannel; +static struct io_subchannel_private console_priv; static int console_subchannel_in_use; +void *cio_get_console_priv(void) +{ + return &console_priv; +} + /* * busy wait for the next interrupt on the console */ @@ -802,7 +811,7 @@ cio_probe_console(void) ctl_set_bit(6, 24); console_subchannel.schib.pmcw.isc = 7; console_subchannel.schib.pmcw.intparm = - (__u32)(unsigned long)&console_subchannel; + (u32)(addr_t)&console_subchannel; ret = cio_modify(&console_subchannel); if (ret) { console_subchannel_in_use = 0; diff --git a/drivers/s390/cio/cio.h b/drivers/s390/cio/cio.h index 7446c39951a7..a6ef218defbe 100644 --- a/drivers/s390/cio/cio.h +++ b/drivers/s390/cio/cio.h @@ -11,32 +11,32 @@ * path management control word */ struct pmcw { - __u32 intparm; /* interruption parameter */ - __u32 qf : 1; /* qdio facility */ - __u32 res0 : 1; /* reserved zeros */ - __u32 isc : 3; /* interruption sublass */ - __u32 res5 : 3; /* reserved zeros */ - __u32 ena : 1; /* enabled */ - __u32 lm : 2; /* limit mode */ - __u32 mme : 2; /* measurement-mode enable */ - __u32 mp : 1; /* multipath mode */ - __u32 tf : 1; /* timing facility */ - __u32 dnv : 1; /* device number valid */ - __u32 dev : 16; /* device number */ - __u8 lpm; /* logical path mask */ - __u8 pnom; /* path not operational mask */ - __u8 lpum; /* last path used mask */ - __u8 pim; /* path installed mask */ - __u16 mbi; /* measurement-block index */ - __u8 pom; /* path operational mask */ - __u8 pam; /* path available mask */ - __u8 chpid[8]; /* CHPID 0-7 (if available) */ - __u32 unused1 : 8; /* reserved zeros */ - __u32 st : 3; /* subchannel type */ - __u32 unused2 : 18; /* reserved zeros */ - __u32 mbfc : 1; /* measurement block format control */ - __u32 xmwme : 1; /* extended measurement word mode enable */ - __u32 csense : 1; /* concurrent sense; can be enabled ...*/ + u32 intparm; /* interruption parameter */ + u32 qf : 1; /* qdio facility */ + u32 res0 : 1; /* reserved zeros */ + u32 isc : 3; /* interruption sublass */ + u32 res5 : 3; /* reserved zeros */ + u32 ena : 1; /* enabled */ + u32 lm : 2; /* limit mode */ + u32 mme : 2; /* measurement-mode enable */ + u32 mp : 1; /* multipath mode */ + u32 tf : 1; /* timing facility */ + u32 dnv : 1; /* device number valid */ + u32 dev : 16; /* device number */ + u8 lpm; /* logical path mask */ + u8 pnom; /* path not operational mask */ + u8 lpum; /* last path used mask */ + u8 pim; /* path installed mask */ + u16 mbi; /* measurement-block index */ + u8 pom; /* path operational mask */ + u8 pam; /* path available mask */ + u8 chpid[8]; /* CHPID 0-7 (if available) */ + u32 unused1 : 8; /* reserved zeros */ + u32 st : 3; /* subchannel type */ + u32 unused2 : 18; /* reserved zeros */ + u32 mbfc : 1; /* measurement block format control */ + u32 xmwme : 1; /* extended measurement word mode enable */ + u32 csense : 1; /* concurrent sense; can be enabled ...*/ /* ... per MSCH, however, if facility */ /* ... is not installed, this results */ /* ... in an operand exception. */ @@ -52,31 +52,6 @@ struct schib { __u8 mda[4]; /* model dependent area */ } __attribute__ ((packed,aligned(4))); -/* - * operation request block - */ -struct orb { - __u32 intparm; /* interruption parameter */ - __u32 key : 4; /* flags, like key, suspend control, etc. */ - __u32 spnd : 1; /* suspend control */ - __u32 res1 : 1; /* reserved */ - __u32 mod : 1; /* modification control */ - __u32 sync : 1; /* synchronize control */ - __u32 fmt : 1; /* format control */ - __u32 pfch : 1; /* prefetch control */ - __u32 isic : 1; /* initial-status-interruption control */ - __u32 alcc : 1; /* address-limit-checking control */ - __u32 ssic : 1; /* suppress-suspended-interr. control */ - __u32 res2 : 1; /* reserved */ - __u32 c64 : 1; /* IDAW/QDIO 64 bit control */ - __u32 i2k : 1; /* IDAW 2/4kB block size control */ - __u32 lpm : 8; /* logical path mask */ - __u32 ils : 1; /* incorrect length */ - __u32 zero : 6; /* reserved zeros */ - __u32 orbx : 1; /* ORB extension control */ - __u32 cpa; /* channel program address */ -} __attribute__ ((packed,aligned(4))); - /* subchannel data structure used by I/O subroutines */ struct subchannel { struct subchannel_id schid; @@ -99,11 +74,10 @@ struct subchannel { __u8 lpm; /* logical path mask */ __u8 opm; /* operational path mask */ struct schib schib; /* subchannel information block */ - struct orb orb; /* operation request block */ - struct ccw1 sense_ccw; /* static ccw for sense command */ struct chsc_ssd_info ssd_info; /* subchannel description */ struct device dev; /* entry in device tree */ struct css_driver *driver; + void *private; /* private per subchannel type data */ } __attribute__ ((aligned(8))); #define IO_INTERRUPT_TYPE 0 /* I/O interrupt type */ @@ -133,10 +107,12 @@ extern void cio_release_console(void); extern int cio_is_console(struct subchannel_id); extern struct subchannel *cio_get_console_subchannel(void); extern spinlock_t * cio_get_console_lock(void); +extern void *cio_get_console_priv(void); #else #define cio_is_console(schid) 0 #define cio_get_console_subchannel() NULL -#define cio_get_console_lock() NULL; +#define cio_get_console_lock() NULL +#define cio_get_console_priv() NULL #endif extern int cio_show_msg; diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c index 7d887f88bb73..2520a44fb93d 100644 --- a/drivers/s390/cio/css.c +++ b/drivers/s390/cio/css.c @@ -77,7 +77,7 @@ css_alloc_subchannel(struct subchannel_id schid) * This is fine even on 64bit since the subchannel is always located * under 2G. */ - sch->schib.pmcw.intparm = (__u32)(unsigned long)sch; + sch->schib.pmcw.intparm = (u32)(addr_t)sch; ret = cio_modify(sch); if (ret) { kfree(sch->lock); diff --git a/drivers/s390/cio/css.h b/drivers/s390/cio/css.h index c9fd600411c4..b2b4a30c285e 100644 --- a/drivers/s390/cio/css.h +++ b/drivers/s390/cio/css.h @@ -58,64 +58,6 @@ struct pgid { __u32 tod_high; /* high word TOD clock */ } __attribute__ ((packed)); -#define MAX_CIWS 8 - -/* - * sense-id response buffer layout - */ -struct senseid { - /* common part */ - __u8 reserved; /* always 0x'FF' */ - __u16 cu_type; /* control unit type */ - __u8 cu_model; /* control unit model */ - __u16 dev_type; /* device type */ - __u8 dev_model; /* device model */ - __u8 unused; /* padding byte */ - /* extended part */ - struct ciw ciw[MAX_CIWS]; /* variable # of CIWs */ -} __attribute__ ((packed,aligned(4))); - -struct ccw_device_private { - struct ccw_device *cdev; - struct subchannel *sch; - int state; /* device state */ - atomic_t onoff; - unsigned long registered; - struct ccw_dev_id dev_id; /* device id */ - struct subchannel_id schid; /* subchannel number */ - __u8 imask; /* lpm mask for SNID/SID/SPGID */ - int iretry; /* retry counter SNID/SID/SPGID */ - struct { - unsigned int fast:1; /* post with "channel end" */ - unsigned int repall:1; /* report every interrupt status */ - unsigned int pgroup:1; /* do path grouping */ - unsigned int force:1; /* allow forced online */ - } __attribute__ ((packed)) options; - struct { - unsigned int pgid_single:1; /* use single path for Set PGID */ - unsigned int esid:1; /* Ext. SenseID supported by HW */ - unsigned int dosense:1; /* delayed SENSE required */ - unsigned int doverify:1; /* delayed path verification */ - unsigned int donotify:1; /* call notify function */ - unsigned int recog_done:1; /* dev. recog. complete */ - unsigned int fake_irb:1; /* deliver faked irb */ - unsigned int intretry:1; /* retry internal operation */ - } __attribute__((packed)) flags; - unsigned long intparm; /* user interruption parameter */ - struct qdio_irq *qdio_data; - struct irb irb; /* device status */ - struct senseid senseid; /* SenseID info */ - struct pgid pgid[8]; /* path group IDs per chpid*/ - struct ccw1 iccws[2]; /* ccws for SNID/SID/SPGID commands */ - struct work_struct kick_work; - wait_queue_head_t wait_q; - struct timer_list timer; - void *cmb; /* measurement information */ - struct list_head cmb_list; /* list of measured devices */ - u64 cmb_start_time; /* clock value of cmb reset */ - void *cmb_wait; /* deferred cmb enable/disable */ -}; - /* * A css driver handles all subchannels of one type. * Currently, we only care about I/O subchannels (type 0), these diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index 7bccca9684e5..30fe59cc28c9 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -28,6 +28,7 @@ #include "css.h" #include "device.h" #include "ioasm.h" +#include "io_sch.h" /******************* bus type handling ***********************/ @@ -1143,6 +1144,11 @@ io_subchannel_probe (struct subchannel *sch) */ dev_id.devno = sch->schib.pmcw.dev; dev_id.ssid = sch->schid.ssid; + /* Allocate I/O subchannel private data. */ + sch->private = kzalloc(sizeof(struct io_subchannel_private), + GFP_KERNEL | GFP_DMA); + if (!sch->private) + return -ENOMEM; cdev = get_disc_ccwdev_by_dev_id(&dev_id, NULL); if (!cdev) cdev = get_orphaned_ccwdev_by_dev_id(to_css(sch->dev.parent), @@ -1160,9 +1166,10 @@ io_subchannel_probe (struct subchannel *sch) return 0; } cdev = io_subchannel_create_ccwdev(sch); - if (IS_ERR(cdev)) + if (IS_ERR(cdev)) { + kfree(sch->private); return PTR_ERR(cdev); - + } rc = io_subchannel_recog(cdev, sch); if (rc) { spin_lock_irqsave(sch->lock, flags); @@ -1170,6 +1177,7 @@ io_subchannel_probe (struct subchannel *sch) spin_unlock_irqrestore(sch->lock, flags); if (cdev->dev.release) cdev->dev.release(&cdev->dev); + kfree(sch->private); } return rc; @@ -1191,6 +1199,7 @@ io_subchannel_remove (struct subchannel *sch) spin_unlock_irqrestore(cdev->ccwlock, flags); ccw_device_unregister(cdev); put_device(&cdev->dev); + kfree(sch->private); return 0; } @@ -1279,6 +1288,9 @@ ccw_device_console_enable (struct ccw_device *cdev, struct subchannel *sch) { int rc; + /* Attach subchannel private data. */ + sch->private = cio_get_console_priv(); + memset(sch->private, 0, sizeof(struct io_subchannel_private)); /* Initialize the ccw_device structure. */ cdev->dev.parent= &sch->dev; rc = io_subchannel_recog(cdev, sch); diff --git a/drivers/s390/cio/device.h b/drivers/s390/cio/device.h index 6183731fb9a2..87576fe2c7c4 100644 --- a/drivers/s390/cio/device.h +++ b/drivers/s390/cio/device.h @@ -5,6 +5,8 @@ #include #include +#include "io_sch.h" + /* * states of the device statemachine */ diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c index 8b6be2142c81..44ce7a3d3857 100644 --- a/drivers/s390/cio/device_fsm.c +++ b/drivers/s390/cio/device_fsm.c @@ -96,29 +96,32 @@ static void ccw_timeout_log(struct ccw_device *cdev) { struct schib schib; struct subchannel *sch; + struct io_subchannel_private *private; int cc; sch = to_subchannel(cdev->dev.parent); + private = to_io_private(sch); cc = stsch(sch->schid, &schib); printk(KERN_WARNING "cio: ccw device timeout occurred at %llx, " "device information:\n", get_clock()); printk(KERN_WARNING "cio: orb:\n"); print_hex_dump(KERN_WARNING, "cio: ", DUMP_PREFIX_NONE, 16, 1, - &sch->orb, sizeof(sch->orb), 0); + &private->orb, sizeof(private->orb), 0); printk(KERN_WARNING "cio: ccw device bus id: %s\n", cdev->dev.bus_id); printk(KERN_WARNING "cio: subchannel bus id: %s\n", sch->dev.bus_id); printk(KERN_WARNING "cio: subchannel lpm: %02x, opm: %02x, " "vpm: %02x\n", sch->lpm, sch->opm, sch->vpm); - if ((void *)(addr_t)sch->orb.cpa == &sch->sense_ccw || - (void *)(addr_t)sch->orb.cpa == cdev->private->iccws) + if ((void *)(addr_t)private->orb.cpa == &private->sense_ccw || + (void *)(addr_t)private->orb.cpa == cdev->private->iccws) printk(KERN_WARNING "cio: last channel program (intern):\n"); else printk(KERN_WARNING "cio: last channel program:\n"); print_hex_dump(KERN_WARNING, "cio: ", DUMP_PREFIX_NONE, 16, 1, - (void *)(addr_t)sch->orb.cpa, sizeof(struct ccw1), 0); + (void *)(addr_t)private->orb.cpa, + sizeof(struct ccw1), 0); printk(KERN_WARNING "cio: ccw device state: %d\n", cdev->private->state); printk(KERN_WARNING "cio: store subchannel returned: cc=%d\n", cc); @@ -1078,7 +1081,7 @@ device_trigger_reprobe(struct subchannel *sch) sch->schib.pmcw.ena = 0; if ((sch->lpm & (sch->lpm - 1)) != 0) sch->schib.pmcw.mp = 1; - sch->schib.pmcw.intparm = (__u32)(unsigned long)sch; + sch->schib.pmcw.intparm = (u32)(addr_t)sch; /* We should also udate ssd info, but this has to wait. */ /* Check if this is another device which appeared on the same sch. */ if (sch->schib.pmcw.dev != cdev->private->dev_id.devno) { diff --git a/drivers/s390/cio/device_id.c b/drivers/s390/cio/device_id.c index 156f3f9786b5..918b8b89cf9a 100644 --- a/drivers/s390/cio/device_id.c +++ b/drivers/s390/cio/device_id.c @@ -24,6 +24,7 @@ #include "css.h" #include "device.h" #include "ioasm.h" +#include "io_sch.h" /* * Input : @@ -219,11 +220,13 @@ ccw_device_check_sense_id(struct ccw_device *cdev) return -EAGAIN; } if (irb->scsw.cc == 3) { - if ((sch->orb.lpm & - sch->schib.pmcw.pim & sch->schib.pmcw.pam) != 0) + u8 lpm; + + lpm = to_io_private(sch)->orb.lpm; + if ((lpm & sch->schib.pmcw.pim & sch->schib.pmcw.pam) != 0) CIO_MSG_EVENT(2, "SenseID : path %02X for device %04x " "on subchannel 0.%x.%04x is " - "'not operational'\n", sch->orb.lpm, + "'not operational'\n", lpm, cdev->private->dev_id.devno, sch->schid.ssid, sch->schid.sch_no); return -EACCES; diff --git a/drivers/s390/cio/device_pgid.c b/drivers/s390/cio/device_pgid.c index cb1879a96818..c52449a1f9fc 100644 --- a/drivers/s390/cio/device_pgid.c +++ b/drivers/s390/cio/device_pgid.c @@ -22,6 +22,7 @@ #include "css.h" #include "device.h" #include "ioasm.h" +#include "io_sch.h" /* * Helper function called from interrupt context to decide whether an @@ -155,10 +156,13 @@ __ccw_device_check_sense_pgid(struct ccw_device *cdev) return -EAGAIN; } if (irb->scsw.cc == 3) { + u8 lpm; + + lpm = to_io_private(sch)->orb.lpm; CIO_MSG_EVENT(2, "SNID - Device %04x on Subchannel 0.%x.%04x," " lpm %02X, became 'not operational'\n", cdev->private->dev_id.devno, sch->schid.ssid, - sch->schid.sch_no, sch->orb.lpm); + sch->schid.sch_no, lpm); return -EACCES; } i = 8 - ffs(cdev->private->imask); diff --git a/drivers/s390/cio/device_status.c b/drivers/s390/cio/device_status.c index aa96e6752592..ebe0848cfe33 100644 --- a/drivers/s390/cio/device_status.c +++ b/drivers/s390/cio/device_status.c @@ -20,6 +20,7 @@ #include "css.h" #include "device.h" #include "ioasm.h" +#include "io_sch.h" /* * Check for any kind of channel or interface control check but don't @@ -310,6 +311,7 @@ int ccw_device_do_sense(struct ccw_device *cdev, struct irb *irb) { struct subchannel *sch; + struct ccw1 *sense_ccw; sch = to_subchannel(cdev->dev.parent); @@ -326,15 +328,16 @@ ccw_device_do_sense(struct ccw_device *cdev, struct irb *irb) /* * We have ending status but no sense information. Do a basic sense. */ - sch->sense_ccw.cmd_code = CCW_CMD_BASIC_SENSE; - sch->sense_ccw.cda = (__u32) __pa(cdev->private->irb.ecw); - sch->sense_ccw.count = SENSE_MAX_COUNT; - sch->sense_ccw.flags = CCW_FLAG_SLI; + sense_ccw = &to_io_private(sch)->sense_ccw; + sense_ccw->cmd_code = CCW_CMD_BASIC_SENSE; + sense_ccw->cda = (__u32) __pa(cdev->private->irb.ecw); + sense_ccw->count = SENSE_MAX_COUNT; + sense_ccw->flags = CCW_FLAG_SLI; /* Reset internal retry indication. */ cdev->private->flags.intretry = 0; - return cio_start (sch, &sch->sense_ccw, 0xff); + return cio_start(sch, sense_ccw, 0xff); } /* diff --git a/drivers/s390/cio/io_sch.h b/drivers/s390/cio/io_sch.h new file mode 100644 index 000000000000..d49e5a77a6bf --- /dev/null +++ b/drivers/s390/cio/io_sch.h @@ -0,0 +1,161 @@ +#ifndef S390_IO_SCH_H +#define S390_IO_SCH_H + +#include "schid.h" + +/* + * operation request block + */ +struct orb { + u32 intparm; /* interruption parameter */ + u32 key : 4; /* flags, like key, suspend control, etc. */ + u32 spnd : 1; /* suspend control */ + u32 res1 : 1; /* reserved */ + u32 mod : 1; /* modification control */ + u32 sync : 1; /* synchronize control */ + u32 fmt : 1; /* format control */ + u32 pfch : 1; /* prefetch control */ + u32 isic : 1; /* initial-status-interruption control */ + u32 alcc : 1; /* address-limit-checking control */ + u32 ssic : 1; /* suppress-suspended-interr. control */ + u32 res2 : 1; /* reserved */ + u32 c64 : 1; /* IDAW/QDIO 64 bit control */ + u32 i2k : 1; /* IDAW 2/4kB block size control */ + u32 lpm : 8; /* logical path mask */ + u32 ils : 1; /* incorrect length */ + u32 zero : 6; /* reserved zeros */ + u32 orbx : 1; /* ORB extension control */ + u32 cpa; /* channel program address */ +} __attribute__ ((packed, aligned(4))); + +struct io_subchannel_private { + struct orb orb; /* operation request block */ + struct ccw1 sense_ccw; /* static ccw for sense command */ +} __attribute__ ((aligned(8))); + +#define to_io_private(n) ((struct io_subchannel_private *)n->private) + +#define MAX_CIWS 8 + +/* + * sense-id response buffer layout + */ +struct senseid { + /* common part */ + u8 reserved; /* always 0x'FF' */ + u16 cu_type; /* control unit type */ + u8 cu_model; /* control unit model */ + u16 dev_type; /* device type */ + u8 dev_model; /* device model */ + u8 unused; /* padding byte */ + /* extended part */ + struct ciw ciw[MAX_CIWS]; /* variable # of CIWs */ +} __attribute__ ((packed, aligned(4))); + +struct ccw_device_private { + struct ccw_device *cdev; + struct subchannel *sch; + int state; /* device state */ + atomic_t onoff; + unsigned long registered; + struct ccw_dev_id dev_id; /* device id */ + struct subchannel_id schid; /* subchannel number */ + u8 imask; /* lpm mask for SNID/SID/SPGID */ + int iretry; /* retry counter SNID/SID/SPGID */ + struct { + unsigned int fast:1; /* post with "channel end" */ + unsigned int repall:1; /* report every interrupt status */ + unsigned int pgroup:1; /* do path grouping */ + unsigned int force:1; /* allow forced online */ + } __attribute__ ((packed)) options; + struct { + unsigned int pgid_single:1; /* use single path for Set PGID */ + unsigned int esid:1; /* Ext. SenseID supported by HW */ + unsigned int dosense:1; /* delayed SENSE required */ + unsigned int doverify:1; /* delayed path verification */ + unsigned int donotify:1; /* call notify function */ + unsigned int recog_done:1; /* dev. recog. complete */ + unsigned int fake_irb:1; /* deliver faked irb */ + unsigned int intretry:1; /* retry internal operation */ + } __attribute__((packed)) flags; + unsigned long intparm; /* user interruption parameter */ + struct qdio_irq *qdio_data; + struct irb irb; /* device status */ + struct senseid senseid; /* SenseID info */ + struct pgid pgid[8]; /* path group IDs per chpid*/ + struct ccw1 iccws[2]; /* ccws for SNID/SID/SPGID commands */ + struct work_struct kick_work; + wait_queue_head_t wait_q; + struct timer_list timer; + void *cmb; /* measurement information */ + struct list_head cmb_list; /* list of measured devices */ + u64 cmb_start_time; /* clock value of cmb reset */ + void *cmb_wait; /* deferred cmb enable/disable */ +}; + +static inline int ssch(struct subchannel_id schid, volatile struct orb *addr) +{ + register struct subchannel_id reg1 asm("1") = schid; + int ccode; + + asm volatile( + " ssch 0(%2)\n" + " ipm %0\n" + " srl %0,28" + : "=d" (ccode) : "d" (reg1), "a" (addr), "m" (*addr) : "cc"); + return ccode; +} + +static inline int rsch(struct subchannel_id schid) +{ + register struct subchannel_id reg1 asm("1") = schid; + int ccode; + + asm volatile( + " rsch\n" + " ipm %0\n" + " srl %0,28" + : "=d" (ccode) : "d" (reg1) : "cc"); + return ccode; +} + +static inline int csch(struct subchannel_id schid) +{ + register struct subchannel_id reg1 asm("1") = schid; + int ccode; + + asm volatile( + " csch\n" + " ipm %0\n" + " srl %0,28" + : "=d" (ccode) : "d" (reg1) : "cc"); + return ccode; +} + +static inline int hsch(struct subchannel_id schid) +{ + register struct subchannel_id reg1 asm("1") = schid; + int ccode; + + asm volatile( + " hsch\n" + " ipm %0\n" + " srl %0,28" + : "=d" (ccode) : "d" (reg1) : "cc"); + return ccode; +} + +static inline int xsch(struct subchannel_id schid) +{ + register struct subchannel_id reg1 asm("1") = schid; + int ccode; + + asm volatile( + " .insn rre,0xb2760000,%1,0\n" + " ipm %0\n" + " srl %0,28" + : "=d" (ccode) : "d" (reg1) : "cc"); + return ccode; +} + +#endif diff --git a/drivers/s390/cio/ioasm.h b/drivers/s390/cio/ioasm.h index 7153dd959082..652ea3625f9d 100644 --- a/drivers/s390/cio/ioasm.h +++ b/drivers/s390/cio/ioasm.h @@ -109,72 +109,6 @@ static inline int tpi( volatile struct tpi_info *addr) return ccode; } -static inline int ssch(struct subchannel_id schid, - volatile struct orb *addr) -{ - register struct subchannel_id reg1 asm ("1") = schid; - int ccode; - - asm volatile( - " ssch 0(%2)\n" - " ipm %0\n" - " srl %0,28" - : "=d" (ccode) : "d" (reg1), "a" (addr), "m" (*addr) : "cc"); - return ccode; -} - -static inline int rsch(struct subchannel_id schid) -{ - register struct subchannel_id reg1 asm ("1") = schid; - int ccode; - - asm volatile( - " rsch\n" - " ipm %0\n" - " srl %0,28" - : "=d" (ccode) : "d" (reg1) : "cc"); - return ccode; -} - -static inline int csch(struct subchannel_id schid) -{ - register struct subchannel_id reg1 asm ("1") = schid; - int ccode; - - asm volatile( - " csch\n" - " ipm %0\n" - " srl %0,28" - : "=d" (ccode) : "d" (reg1) : "cc"); - return ccode; -} - -static inline int hsch(struct subchannel_id schid) -{ - register struct subchannel_id reg1 asm ("1") = schid; - int ccode; - - asm volatile( - " hsch\n" - " ipm %0\n" - " srl %0,28" - : "=d" (ccode) : "d" (reg1) : "cc"); - return ccode; -} - -static inline int xsch(struct subchannel_id schid) -{ - register struct subchannel_id reg1 asm ("1") = schid; - int ccode; - - asm volatile( - " .insn rre,0xb2760000,%1,0\n" - " ipm %0\n" - " srl %0,28" - : "=d" (ccode) : "d" (reg1) : "cc"); - return ccode; -} - static inline int chsc(void *chsc_area) { typedef struct { char _[4096]; } addr_type; -- cgit v1.2.3-59-g8ed1b From 4e8e56c6713398f417317d449f50c08bf2756c66 Mon Sep 17 00:00:00 2001 From: Peter Oberparleiter Date: Sat, 26 Jan 2008 14:10:44 +0100 Subject: [S390] cio: Extend adapter interrupt interface. From: Cornelia Huck Change the adapter interrupt interface in order to allow multiple adapter interrupt handlers to be registered. Indicators are now allocated by cio instead of the device driver. The qdio parts have been Acked-by: Ursula Braun Signed-off-by: Peter Oberparleiter Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- Documentation/DocBook/s390-drivers.tmpl | 1 + drivers/s390/cio/airq.c | 171 +++++++++++++++++++++----------- drivers/s390/cio/airq.h | 10 -- drivers/s390/cio/cio.c | 2 +- drivers/s390/cio/cio.h | 1 + drivers/s390/cio/qdio.c | 35 ++++--- include/asm-s390/airq.h | 19 ++++ 7 files changed, 154 insertions(+), 85 deletions(-) delete mode 100644 drivers/s390/cio/airq.h create mode 100644 include/asm-s390/airq.h diff --git a/Documentation/DocBook/s390-drivers.tmpl b/Documentation/DocBook/s390-drivers.tmpl index 254e769282a4..3d2f31b99dd9 100644 --- a/Documentation/DocBook/s390-drivers.tmpl +++ b/Documentation/DocBook/s390-drivers.tmpl @@ -116,6 +116,7 @@ !Iinclude/asm-s390/ccwdev.h !Edrivers/s390/cio/device.c !Edrivers/s390/cio/device_ops.c +!Edrivers/s390/cio/airq.c The channel-measurement facility diff --git a/drivers/s390/cio/airq.c b/drivers/s390/cio/airq.c index 5287631fbfc8..b7a07a866291 100644 --- a/drivers/s390/cio/airq.c +++ b/drivers/s390/cio/airq.c @@ -1,12 +1,12 @@ /* * drivers/s390/cio/airq.c - * S/390 common I/O routines -- support for adapter interruptions + * Support for adapter interruptions * - * Copyright (C) 1999-2002 IBM Deutschland Entwicklung GmbH, - * IBM Corporation - * Author(s): Ingo Adlung (adlung@de.ibm.com) - * Cornelia Huck (cornelia.huck@de.ibm.com) - * Arnd Bergmann (arndb@de.ibm.com) + * Copyright IBM Corp. 1999,2007 + * Author(s): Ingo Adlung + * Cornelia Huck + * Arnd Bergmann + * Peter Oberparleiter */ #include @@ -14,72 +14,131 @@ #include #include +#include + +#include "cio.h" #include "cio_debug.h" -#include "airq.h" -static adapter_int_handler_t adapter_handler; +#define NR_AIRQS 32 +#define NR_AIRQS_PER_WORD sizeof(unsigned long) +#define NR_AIRQ_WORDS (NR_AIRQS / NR_AIRQS_PER_WORD) -/* - * register for adapter interrupts - * - * With HiperSockets the zSeries architecture provides for - * means of adapter interrups, pseudo I/O interrupts that are - * not tied to an I/O subchannel, but to an adapter. However, - * it doesn't disclose the info how to enable/disable them, but - * to recognize them only. Perhaps we should consider them - * being shared interrupts, and thus build a linked list - * of adapter handlers ... to be evaluated ... - */ -int -s390_register_adapter_interrupt (adapter_int_handler_t handler) -{ - int ret; - char dbf_txt[15]; +union indicator_t { + unsigned long word[NR_AIRQ_WORDS]; + unsigned char byte[NR_AIRQS]; +} __attribute__((packed)); - CIO_TRACE_EVENT (4, "rgaint"); +struct airq_t { + adapter_int_handler_t handler; + void *drv_data; +}; - if (handler == NULL) - ret = -EINVAL; - else - ret = (cmpxchg(&adapter_handler, NULL, handler) ? -EBUSY : 0); - if (!ret) - synchronize_sched(); /* Allow interrupts to complete. */ +static union indicator_t indicators; +static struct airq_t *airqs[NR_AIRQS]; - sprintf (dbf_txt, "ret:%d", ret); - CIO_TRACE_EVENT (4, dbf_txt); +static int register_airq(struct airq_t *airq) +{ + int i; - return ret; + for (i = 0; i < NR_AIRQS; i++) + if (!cmpxchg(&airqs[i], NULL, airq)) + return i; + return -ENOMEM; } -int -s390_unregister_adapter_interrupt (adapter_int_handler_t handler) +/** + * s390_register_adapter_interrupt() - register adapter interrupt handler + * @handler: adapter handler to be registered + * @drv_data: driver data passed with each call to the handler + * + * Returns: + * Pointer to the indicator to be used on success + * ERR_PTR() if registration failed + */ +void *s390_register_adapter_interrupt(adapter_int_handler_t handler, + void *drv_data) { + struct airq_t *airq; + char dbf_txt[16]; int ret; - char dbf_txt[15]; - CIO_TRACE_EVENT (4, "urgaint"); - - if (handler == NULL) - ret = -EINVAL; - else { - adapter_handler = NULL; - synchronize_sched(); /* Allow interrupts to complete. */ - ret = 0; + airq = kmalloc(sizeof(struct airq_t), GFP_KERNEL); + if (!airq) { + ret = -ENOMEM; + goto out; } - sprintf (dbf_txt, "ret:%d", ret); - CIO_TRACE_EVENT (4, dbf_txt); - - return ret; + airq->handler = handler; + airq->drv_data = drv_data; + ret = register_airq(airq); + if (ret < 0) + kfree(airq); +out: + snprintf(dbf_txt, sizeof(dbf_txt), "rairq:%d", ret); + CIO_TRACE_EVENT(4, dbf_txt); + if (ret < 0) + return ERR_PTR(ret); + else + return &indicators.byte[ret]; } +EXPORT_SYMBOL(s390_register_adapter_interrupt); -void -do_adapter_IO (void) +/** + * s390_unregister_adapter_interrupt - unregister adapter interrupt handler + * @ind: indicator for which the handler is to be unregistered + */ +void s390_unregister_adapter_interrupt(void *ind) { - CIO_TRACE_EVENT (6, "doaio"); + struct airq_t *airq; + char dbf_txt[16]; + int i; - if (adapter_handler) - (*adapter_handler) (); + i = (int) ((addr_t) ind) - ((addr_t) &indicators.byte[0]); + snprintf(dbf_txt, sizeof(dbf_txt), "urairq:%d", i); + CIO_TRACE_EVENT(4, dbf_txt); + indicators.byte[i] = 0; + airq = xchg(&airqs[i], NULL); + /* + * Allow interrupts to complete. This will ensure that the airq handle + * is no longer referenced by any interrupt handler. + */ + synchronize_sched(); + kfree(airq); } +EXPORT_SYMBOL(s390_unregister_adapter_interrupt); + +#define INDICATOR_MASK (0xffUL << ((NR_AIRQS_PER_WORD - 1) * 8)) -EXPORT_SYMBOL (s390_register_adapter_interrupt); -EXPORT_SYMBOL (s390_unregister_adapter_interrupt); +void do_adapter_IO(void) +{ + int w; + int i; + unsigned long word; + struct airq_t *airq; + + /* + * Access indicator array in word-sized chunks to minimize storage + * fetch operations. + */ + for (w = 0; w < NR_AIRQ_WORDS; w++) { + word = indicators.word[w]; + i = w * NR_AIRQS_PER_WORD; + /* + * Check bytes within word for active indicators. + */ + while (word) { + if (word & INDICATOR_MASK) { + airq = airqs[i]; + if (likely(airq)) + airq->handler(&indicators.byte[i], + airq->drv_data); + else + /* + * Reset ill-behaved indicator. + */ + indicators.byte[i] = 0; + } + word <<= 8; + i++; + } + } +} diff --git a/drivers/s390/cio/airq.h b/drivers/s390/cio/airq.h deleted file mode 100644 index 7d6be3fdcd66..000000000000 --- a/drivers/s390/cio/airq.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef S390_AINTERRUPT_H -#define S390_AINTERRUPT_H - -typedef int (*adapter_int_handler_t)(void); - -extern int s390_register_adapter_interrupt(adapter_int_handler_t handler); -extern int s390_unregister_adapter_interrupt(adapter_int_handler_t handler); -extern void do_adapter_IO (void); - -#endif diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c index d0bcebde3fa2..89ced3408138 100644 --- a/drivers/s390/cio/cio.c +++ b/drivers/s390/cio/cio.c @@ -23,7 +23,7 @@ #include #include #include -#include "airq.h" +#include #include "cio.h" #include "css.h" #include "chsc.h" diff --git a/drivers/s390/cio/cio.h b/drivers/s390/cio/cio.h index a6ef218defbe..d1483d65049c 100644 --- a/drivers/s390/cio/cio.h +++ b/drivers/s390/cio/cio.h @@ -99,6 +99,7 @@ extern int cio_get_options (struct subchannel *); extern int cio_modify (struct subchannel *); int cio_create_sch_lock(struct subchannel *); +void do_adapter_IO(void); /* Use with care. */ #ifdef CONFIG_CCW_CONSOLE diff --git a/drivers/s390/cio/qdio.c b/drivers/s390/cio/qdio.c index 40a3208c7cf3..7a353db8564f 100644 --- a/drivers/s390/cio/qdio.c +++ b/drivers/s390/cio/qdio.c @@ -48,11 +48,11 @@ #include #include #include +#include #include "cio.h" #include "css.h" #include "device.h" -#include "airq.h" #include "qdio.h" #include "ioasm.h" #include "chsc.h" @@ -96,7 +96,7 @@ static debug_info_t *qdio_dbf_slsb_in; static volatile struct qdio_q *tiq_list=NULL; /* volatile as it could change during a while loop */ static DEFINE_SPINLOCK(ttiq_list_lock); -static int register_thinint_result; +static void *tiqdio_ind; static void tiqdio_tl(unsigned long); static DECLARE_TASKLET(tiqdio_tasklet,tiqdio_tl,0); @@ -399,7 +399,7 @@ qdio_get_indicator(void) { int i; - for (i=1;idev_st_chg_ind); } @@ -3740,23 +3738,25 @@ static void tiqdio_register_thinints(void) { char dbf_text[20]; - register_thinint_result= - s390_register_adapter_interrupt(&tiqdio_thinint_handler); - if (register_thinint_result) { - sprintf(dbf_text,"regthn%x",(register_thinint_result&0xff)); + + tiqdio_ind = + s390_register_adapter_interrupt(&tiqdio_thinint_handler, NULL); + if (IS_ERR(tiqdio_ind)) { + sprintf(dbf_text, "regthn%lx", PTR_ERR(tiqdio_ind)); QDIO_DBF_TEXT0(0,setup,dbf_text); QDIO_PRINT_ERR("failed to register adapter handler " \ - "(rc=%i).\nAdapter interrupts might " \ + "(rc=%li).\nAdapter interrupts might " \ "not work. Continuing.\n", - register_thinint_result); + PTR_ERR(tiqdio_ind)); + tiqdio_ind = NULL; } } static void tiqdio_unregister_thinints(void) { - if (!register_thinint_result) - s390_unregister_adapter_interrupt(&tiqdio_thinint_handler); + if (tiqdio_ind) + s390_unregister_adapter_interrupt(tiqdio_ind); } static int @@ -3768,8 +3768,8 @@ qdio_get_qdio_memory(void) for (i=1;i + * Cornelia Huck + * Arnd Bergmann + * Peter Oberparleiter + */ + +#ifndef _ASM_S390_AIRQ_H +#define _ASM_S390_AIRQ_H + +typedef void (*adapter_int_handler_t)(void *, void *); + +void *s390_register_adapter_interrupt(adapter_int_handler_t, void *); +void s390_unregister_adapter_interrupt(void *); + +#endif /* _ASM_S390_AIRQ_H */ -- cgit v1.2.3-59-g8ed1b From b279a4f56d5476a0b9b0a97397f7a7bbe00b9b2f Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Sat, 26 Jan 2008 14:10:45 +0100 Subject: [S390] cio: I/O subchannel specific fields. Some fields may be !0 only for I/O subchannels. Add some checks where required. Also adapt cio_enable_subchannel() to make the caller specify the intparm, which makes it more generic. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/chsc.c | 5 +++-- drivers/s390/cio/cio.c | 24 ++++++++++++------------ drivers/s390/cio/cio.h | 4 ++-- drivers/s390/cio/css.c | 18 ++++++++++++++++-- drivers/s390/cio/css.h | 2 ++ drivers/s390/cio/device_fsm.c | 9 ++++++--- drivers/s390/cio/device_ops.c | 2 +- 7 files changed, 42 insertions(+), 22 deletions(-) diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c index 44a2ea40806e..12a344c66b46 100644 --- a/drivers/s390/cio/chsc.c +++ b/drivers/s390/cio/chsc.c @@ -89,7 +89,8 @@ int chsc_get_ssd_info(struct subchannel_id schid, struct chsc_ssd_info *ssd) /* Copy data */ ret = 0; memset(ssd, 0, sizeof(struct chsc_ssd_info)); - if ((ssd_area->st != 0) && (ssd_area->st != 2)) + if ((ssd_area->st != SUBCHANNEL_TYPE_IO) && + (ssd_area->st != SUBCHANNEL_TYPE_MSG)) goto out_free; ssd->path_mask = ssd_area->path_mask; ssd->fla_valid_mask = ssd_area->fla_valid_mask; @@ -158,7 +159,7 @@ s390_subchannel_remove_chpid(struct device *dev, void *data) spin_lock_irq(sch->lock); stsch(sch->schid, &schib); - if (!schib.pmcw.dnv) + if (!css_sch_is_valid(&schib)) goto out_unreg; memcpy(&sch->schib, &schib, sizeof(struct schib)); /* Check for single path devices. */ diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c index 89ced3408138..f16c15c13f6e 100644 --- a/drivers/s390/cio/cio.c +++ b/drivers/s390/cio/cio.c @@ -406,8 +406,8 @@ cio_modify (struct subchannel *sch) /* * Enable subchannel. */ -int -cio_enable_subchannel (struct subchannel *sch, unsigned int isc) +int cio_enable_subchannel(struct subchannel *sch, unsigned int isc, + u32 intparm) { char dbf_txt[15]; int ccode; @@ -426,7 +426,7 @@ cio_enable_subchannel (struct subchannel *sch, unsigned int isc) for (retry = 5, ret = 0; retry > 0; retry--) { sch->schib.pmcw.ena = 1; sch->schib.pmcw.isc = isc; - sch->schib.pmcw.intparm = (u32)(addr_t)sch; + sch->schib.pmcw.intparm = intparm; ret = cio_modify(sch); if (ret == -ENODEV) break; @@ -577,11 +577,8 @@ cio_validate_subchannel (struct subchannel *sch, struct subchannel_id schid) } /* Initialization for io subchannels. */ - if (!sch->schib.pmcw.dnv) { - /* io subchannel but device number is invalid. */ - err = -ENODEV; - goto out; - } + if (!css_sch_is_valid(&sch->schib)) + return -ENODEV; /* Devno is valid. */ if (is_blacklisted (sch->schid.ssid, sch->schib.pmcw.dev)) { /* @@ -745,9 +742,9 @@ cio_test_for_console(struct subchannel_id schid, void *data) { if (stsch_err(schid, &console_subchannel.schib) != 0) return -ENXIO; - if (console_subchannel.schib.pmcw.dnv && - console_subchannel.schib.pmcw.dev == - console_devno) { + if ((console_subchannel.schib.pmcw.st == SUBCHANNEL_TYPE_IO) && + console_subchannel.schib.pmcw.dnv && + (console_subchannel.schib.pmcw.dev == console_devno)) { console_irq = schid.sch_no; return 1; /* found */ } @@ -765,6 +762,7 @@ cio_get_console_sch_no(void) /* VM provided us with the irq number of the console. */ schid.sch_no = console_irq; if (stsch(schid, &console_subchannel.schib) != 0 || + (console_subchannel.schib.pmcw.st != SUBCHANNEL_TYPE_IO) || !console_subchannel.schib.pmcw.dnv) return -1; console_devno = console_subchannel.schib.pmcw.dev; @@ -1029,7 +1027,7 @@ static int __reipl_subchannel_match(struct subchannel_id schid, void *data) if (stsch_reset(schid, &schib)) return -ENXIO; - if (schib.pmcw.dnv && + if ((schib.pmcw.st == SUBCHANNEL_TYPE_IO) && schib.pmcw.dnv && (schib.pmcw.dev == match_id->devid.devno) && (schid.ssid == match_id->devid.ssid)) { match_id->schid = schid; @@ -1075,6 +1073,8 @@ int __init cio_get_iplinfo(struct cio_iplinfo *iplinfo) return -ENODEV; if (stsch(schid, &schib)) return -ENODEV; + if (schib.pmcw.st != SUBCHANNEL_TYPE_IO) + return -ENODEV; if (!schib.pmcw.dnv) return -ENODEV; iplinfo->devno = schib.pmcw.dev; diff --git a/drivers/s390/cio/cio.h b/drivers/s390/cio/cio.h index d1483d65049c..52afa4c784de 100644 --- a/drivers/s390/cio/cio.h +++ b/drivers/s390/cio/cio.h @@ -60,7 +60,7 @@ struct subchannel { enum { SUBCHANNEL_TYPE_IO = 0, SUBCHANNEL_TYPE_CHSC = 1, - SUBCHANNEL_TYPE_MESSAGE = 2, + SUBCHANNEL_TYPE_MSG = 2, SUBCHANNEL_TYPE_ADM = 3, } st; /* subchannel type */ @@ -85,7 +85,7 @@ struct subchannel { #define to_subchannel(n) container_of(n, struct subchannel, dev) extern int cio_validate_subchannel (struct subchannel *, struct subchannel_id); -extern int cio_enable_subchannel (struct subchannel *, unsigned int); +extern int cio_enable_subchannel(struct subchannel *, unsigned int, u32); extern int cio_disable_subchannel (struct subchannel *); extern int cio_cancel (struct subchannel *); extern int cio_clear (struct subchannel *); diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c index 2520a44fb93d..4d98a0fddedf 100644 --- a/drivers/s390/cio/css.c +++ b/drivers/s390/cio/css.c @@ -237,11 +237,25 @@ get_subchannel_by_schid(struct subchannel_id schid) return dev ? to_subchannel(dev) : NULL; } +/** + * css_sch_is_valid() - check if a subchannel is valid + * @schib: subchannel information block for the subchannel + */ +int css_sch_is_valid(struct schib *schib) +{ + if ((schib->pmcw.st == SUBCHANNEL_TYPE_IO) && !schib->pmcw.dnv) + return 0; + return 1; +} +EXPORT_SYMBOL_GPL(css_sch_is_valid); + static int css_get_subchannel_status(struct subchannel *sch) { struct schib schib; - if (stsch(sch->schid, &schib) || !schib.pmcw.dnv) + if (stsch(sch->schid, &schib)) + return CIO_GONE; + if (!css_sch_is_valid(&schib)) return CIO_GONE; if (sch->schib.pmcw.dnv && (schib.pmcw.dev != sch->schib.pmcw.dev)) return CIO_REVALIDATE; @@ -349,7 +363,7 @@ static int css_evaluate_new_subchannel(struct subchannel_id schid, int slow) /* Will be done on the slow path. */ return -EAGAIN; } - if (stsch_err(schid, &schib) || !schib.pmcw.dnv) { + if (stsch_err(schid, &schib) || !css_sch_is_valid(&schib)) { /* Unusable - ignore. */ return 0; } diff --git a/drivers/s390/cio/css.h b/drivers/s390/cio/css.h index b2b4a30c285e..ee65761e8254 100644 --- a/drivers/s390/cio/css.h +++ b/drivers/s390/cio/css.h @@ -136,6 +136,8 @@ void css_schedule_eval(struct subchannel_id schid); void css_schedule_eval_all(void); int sch_is_pseudo_sch(struct subchannel *); +struct schib; +int css_sch_is_valid(struct schib *); extern struct workqueue_struct *slow_path_wq; diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c index 44ce7a3d3857..4804d944fb4d 100644 --- a/drivers/s390/cio/device_fsm.c +++ b/drivers/s390/cio/device_fsm.c @@ -553,7 +553,8 @@ ccw_device_recognition(struct ccw_device *cdev) (cdev->private->state != DEV_STATE_BOXED)) return -EINVAL; sch = to_subchannel(cdev->dev.parent); - ret = cio_enable_subchannel(sch, sch->schib.pmcw.isc); + ret = cio_enable_subchannel(sch, sch->schib.pmcw.isc, + (u32)(addr_t)sch); if (ret != 0) /* Couldn't enable the subchannel for i/o. Sick device. */ return ret; @@ -663,7 +664,8 @@ ccw_device_online(struct ccw_device *cdev) sch = to_subchannel(cdev->dev.parent); if (css_init_done && !get_device(&cdev->dev)) return -ENODEV; - ret = cio_enable_subchannel(sch, sch->schib.pmcw.isc); + ret = cio_enable_subchannel(sch, sch->schib.pmcw.isc, + (u32)(addr_t)sch); if (ret != 0) { /* Couldn't enable the subchannel for i/o. Sick device. */ if (ret == -ENODEV) @@ -1043,7 +1045,8 @@ ccw_device_start_id(struct ccw_device *cdev, enum dev_event dev_event) struct subchannel *sch; sch = to_subchannel(cdev->dev.parent); - if (cio_enable_subchannel(sch, sch->schib.pmcw.isc) != 0) + if (cio_enable_subchannel(sch, sch->schib.pmcw.isc, + (u32)(addr_t)sch) != 0) /* Couldn't enable the subchannel for i/o. Sick device. */ return; diff --git a/drivers/s390/cio/device_ops.c b/drivers/s390/cio/device_ops.c index 7fd2dadc3297..49b58eb0fab8 100644 --- a/drivers/s390/cio/device_ops.c +++ b/drivers/s390/cio/device_ops.c @@ -501,7 +501,7 @@ ccw_device_stlck(struct ccw_device *cdev) return -ENOMEM; } spin_lock_irqsave(sch->lock, flags); - ret = cio_enable_subchannel(sch, 3); + ret = cio_enable_subchannel(sch, 3, (u32)(addr_t)sch); if (ret) goto out_unlock; /* -- cgit v1.2.3-59-g8ed1b From db6a64238a927777e6e7b251927313f186455b1c Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Sat, 26 Jan 2008 14:10:46 +0100 Subject: [S390] cio: Use dev_{g,s}et_drvdata(). Also define helpers sch_{g,s}et_cdev() to make the intention more clear. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/ccwgroup.c | 14 +++++++------- drivers/s390/cio/device.c | 36 ++++++++++++++++++------------------ drivers/s390/cio/device_fsm.c | 26 +++++++++++++------------- drivers/s390/cio/io_sch.h | 2 ++ 4 files changed, 40 insertions(+), 38 deletions(-) diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c index b3e2c16caa41..b9997fb4883c 100644 --- a/drivers/s390/cio/ccwgroup.c +++ b/drivers/s390/cio/ccwgroup.c @@ -111,7 +111,7 @@ ccwgroup_release (struct device *dev) gdev = to_ccwgroupdev(dev); for (i = 0; i < gdev->count; i++) { - gdev->cdev[i]->dev.driver_data = NULL; + dev_set_drvdata(&gdev->cdev[i]->dev, NULL); put_device(&gdev->cdev[i]->dev); } kfree(gdev); @@ -196,11 +196,11 @@ int ccwgroup_create(struct device *root, unsigned int creator_id, goto error; } /* Don't allow a device to belong to more than one group. */ - if (gdev->cdev[i]->dev.driver_data) { + if (dev_get_drvdata(&gdev->cdev[i]->dev)) { rc = -EINVAL; goto error; } - gdev->cdev[i]->dev.driver_data = gdev; + dev_set_drvdata(&gdev->cdev[i]->dev, gdev); } gdev->creator_id = creator_id; @@ -234,8 +234,8 @@ int ccwgroup_create(struct device *root, unsigned int creator_id, error: for (i = 0; i < argc; i++) if (gdev->cdev[i]) { - if (gdev->cdev[i]->dev.driver_data == gdev) - gdev->cdev[i]->dev.driver_data = NULL; + if (dev_get_drvdata(&gdev->cdev[i]->dev) == gdev) + dev_set_drvdata(&gdev->cdev[i]->dev, NULL); put_device(&gdev->cdev[i]->dev); } mutex_unlock(&gdev->reg_mutex); @@ -463,8 +463,8 @@ __ccwgroup_get_gdev_by_cdev(struct ccw_device *cdev) { struct ccwgroup_device *gdev; - if (cdev->dev.driver_data) { - gdev = (struct ccwgroup_device *)cdev->dev.driver_data; + gdev = dev_get_drvdata(&cdev->dev); + if (gdev) { if (get_device(&gdev->dev)) { mutex_lock(&gdev->reg_mutex); if (device_is_registered(&gdev->dev)) diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index 30fe59cc28c9..933f763e9586 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -773,7 +773,7 @@ static void sch_attach_device(struct subchannel *sch, { css_update_ssd_info(sch); spin_lock_irq(sch->lock); - sch->dev.driver_data = cdev; + sch_set_cdev(sch, cdev); cdev->private->schid = sch->schid; cdev->ccwlock = sch->lock; device_trigger_reprobe(sch); @@ -795,7 +795,7 @@ static void sch_attach_disconnected_device(struct subchannel *sch, put_device(&other_sch->dev); return; } - other_sch->dev.driver_data = NULL; + sch_set_cdev(other_sch, NULL); /* No need to keep a subchannel without ccw device around. */ css_sch_device_unregister(other_sch); put_device(&other_sch->dev); @@ -831,12 +831,12 @@ static void sch_create_and_recog_new_device(struct subchannel *sch) return; } spin_lock_irq(sch->lock); - sch->dev.driver_data = cdev; + sch_set_cdev(sch, cdev); spin_unlock_irq(sch->lock); /* Start recognition for the new ccw device. */ if (io_subchannel_recog(cdev, sch)) { spin_lock_irq(sch->lock); - sch->dev.driver_data = NULL; + sch_set_cdev(sch, NULL); spin_unlock_irq(sch->lock); if (cdev->dev.release) cdev->dev.release(&cdev->dev); @@ -940,7 +940,7 @@ io_subchannel_register(struct work_struct *work) cdev->private->dev_id.devno, ret); put_device(&cdev->dev); spin_lock_irqsave(sch->lock, flags); - sch->dev.driver_data = NULL; + sch_set_cdev(sch, NULL); spin_unlock_irqrestore(sch->lock, flags); kfree (cdev->private); kfree (cdev); @@ -1022,7 +1022,7 @@ io_subchannel_recog(struct ccw_device *cdev, struct subchannel *sch) int rc; struct ccw_device_private *priv; - sch->dev.driver_data = cdev; + sch_set_cdev(sch, cdev); sch->driver = &io_subchannel_driver; cdev->ccwlock = sch->lock; @@ -1082,7 +1082,7 @@ static void ccw_device_move_to_sch(struct work_struct *work) } if (former_parent) { spin_lock_irq(former_parent->lock); - former_parent->dev.driver_data = NULL; + sch_set_cdev(former_parent, NULL); spin_unlock_irq(former_parent->lock); css_sch_device_unregister(former_parent); /* Reset intparm to zeroes. */ @@ -1100,7 +1100,7 @@ static void io_subchannel_irq(struct subchannel *sch) { struct ccw_device *cdev; - cdev = sch->dev.driver_data; + cdev = sch_get_cdev(sch); CIO_TRACE_EVENT(3, "IRQ"); CIO_TRACE_EVENT(3, sch->dev.bus_id); @@ -1116,13 +1116,13 @@ io_subchannel_probe (struct subchannel *sch) unsigned long flags; struct ccw_dev_id dev_id; - if (sch->dev.driver_data) { + cdev = sch_get_cdev(sch); + if (cdev) { /* * This subchannel already has an associated ccw_device. * Register it and exit. This happens for all early * device, e.g. the console. */ - cdev = sch->dev.driver_data; cdev->dev.groups = ccwdev_attr_groups; device_initialize(&cdev->dev); ccw_device_register(cdev); @@ -1173,7 +1173,7 @@ io_subchannel_probe (struct subchannel *sch) rc = io_subchannel_recog(cdev, sch); if (rc) { spin_lock_irqsave(sch->lock, flags); - sch->dev.driver_data = NULL; + sch_set_cdev(sch, NULL); spin_unlock_irqrestore(sch->lock, flags); if (cdev->dev.release) cdev->dev.release(&cdev->dev); @@ -1189,12 +1189,12 @@ io_subchannel_remove (struct subchannel *sch) struct ccw_device *cdev; unsigned long flags; - if (!sch->dev.driver_data) + cdev = sch_get_cdev(sch); + if (!cdev) return 0; - cdev = sch->dev.driver_data; /* Set ccw device to not operational and drop reference. */ spin_lock_irqsave(cdev->ccwlock, flags); - sch->dev.driver_data = NULL; + sch_set_cdev(sch, NULL); cdev->private->state = DEV_STATE_NOT_OPER; spin_unlock_irqrestore(cdev->ccwlock, flags); ccw_device_unregister(cdev); @@ -1207,7 +1207,7 @@ static int io_subchannel_notify(struct subchannel *sch, int event) { struct ccw_device *cdev; - cdev = sch->dev.driver_data; + cdev = sch_get_cdev(sch); if (!cdev) return 0; if (!cdev->drv) @@ -1221,7 +1221,7 @@ static void io_subchannel_verify(struct subchannel *sch) { struct ccw_device *cdev; - cdev = sch->dev.driver_data; + cdev = sch_get_cdev(sch); if (cdev) dev_fsm_event(cdev, DEV_EVENT_VERIFY); } @@ -1230,7 +1230,7 @@ static void io_subchannel_ioterm(struct subchannel *sch) { struct ccw_device *cdev; - cdev = sch->dev.driver_data; + cdev = sch_get_cdev(sch); if (!cdev) return; /* Internal I/O will be retried by the interrupt handler. */ @@ -1248,7 +1248,7 @@ io_subchannel_shutdown(struct subchannel *sch) struct ccw_device *cdev; int ret; - cdev = sch->dev.driver_data; + cdev = sch_get_cdev(sch); if (cio_is_console(sch->schid)) return; diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c index 4804d944fb4d..669e6a75f54f 100644 --- a/drivers/s390/cio/device_fsm.c +++ b/drivers/s390/cio/device_fsm.c @@ -32,9 +32,9 @@ device_is_online(struct subchannel *sch) { struct ccw_device *cdev; - if (!sch->dev.driver_data) + cdev = sch_get_cdev(sch); + if (!cdev) return 0; - cdev = sch->dev.driver_data; return (cdev->private->state == DEV_STATE_ONLINE); } @@ -43,9 +43,9 @@ device_is_disconnected(struct subchannel *sch) { struct ccw_device *cdev; - if (!sch->dev.driver_data) + cdev = sch_get_cdev(sch); + if (!cdev) return 0; - cdev = sch->dev.driver_data; return (cdev->private->state == DEV_STATE_DISCONNECTED || cdev->private->state == DEV_STATE_DISCONNECTED_SENSE_ID); } @@ -55,9 +55,9 @@ device_set_disconnected(struct subchannel *sch) { struct ccw_device *cdev; - if (!sch->dev.driver_data) + cdev = sch_get_cdev(sch); + if (!cdev) return; - cdev = sch->dev.driver_data; ccw_device_set_timeout(cdev, 0); cdev->private->flags.fake_irb = 0; cdev->private->state = DEV_STATE_DISCONNECTED; @@ -67,7 +67,7 @@ void device_set_intretry(struct subchannel *sch) { struct ccw_device *cdev; - cdev = sch->dev.driver_data; + cdev = sch_get_cdev(sch); if (!cdev) return; cdev->private->flags.intretry = 1; @@ -77,7 +77,7 @@ int device_trigger_verify(struct subchannel *sch) { struct ccw_device *cdev; - cdev = sch->dev.driver_data; + cdev = sch_get_cdev(sch); if (!cdev || !cdev->online) return -EINVAL; dev_fsm_event(cdev, DEV_EVENT_VERIFY); @@ -175,9 +175,9 @@ device_kill_pending_timer(struct subchannel *sch) { struct ccw_device *cdev; - if (!sch->dev.driver_data) + cdev = sch_get_cdev(sch); + if (!cdev) return; - cdev = sch->dev.driver_data; ccw_device_set_timeout(cdev, 0); } @@ -992,7 +992,7 @@ void device_kill_io(struct subchannel *sch) int ret; struct ccw_device *cdev; - cdev = sch->dev.driver_data; + cdev = sch_get_cdev(sch); ret = ccw_device_cancel_halt_clear(cdev); if (ret == -EBUSY) { ccw_device_set_timeout(cdev, 3*HZ); @@ -1062,9 +1062,9 @@ device_trigger_reprobe(struct subchannel *sch) { struct ccw_device *cdev; - if (!sch->dev.driver_data) + cdev = sch_get_cdev(sch); + if (!cdev) return; - cdev = sch->dev.driver_data; if (cdev->private->state != DEV_STATE_DISCONNECTED) return; diff --git a/drivers/s390/cio/io_sch.h b/drivers/s390/cio/io_sch.h index d49e5a77a6bf..8c613160bfce 100644 --- a/drivers/s390/cio/io_sch.h +++ b/drivers/s390/cio/io_sch.h @@ -34,6 +34,8 @@ struct io_subchannel_private { } __attribute__ ((aligned(8))); #define to_io_private(n) ((struct io_subchannel_private *)n->private) +#define sch_get_cdev(n) (dev_get_drvdata(&n->dev)) +#define sch_set_cdev(n, c) (dev_set_drvdata(&n->dev, c)) #define MAX_CIWS 8 -- cgit v1.2.3-59-g8ed1b From 4beee64685e116b01c47655daf6d88df87e053c8 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Sat, 26 Jan 2008 14:10:47 +0100 Subject: [S390] cio: Set driver->owner on css, ccw and ccwgroup busses. Set the owner field in the embedded struct device_driver to the value provided in the {css,ccw,ccwgroup}_driver. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/ccwgroup.c | 1 + drivers/s390/cio/css.c | 1 + drivers/s390/cio/css.h | 1 + drivers/s390/cio/device.c | 2 ++ 4 files changed, 5 insertions(+) diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c index b9997fb4883c..dc1c5f4dd256 100644 --- a/drivers/s390/cio/ccwgroup.c +++ b/drivers/s390/cio/ccwgroup.c @@ -408,6 +408,7 @@ int ccwgroup_driver_register(struct ccwgroup_driver *cdriver) /* register our new driver with the core */ cdriver->driver.bus = &ccwgroup_bus_type; cdriver->driver.name = cdriver->name; + cdriver->driver.owner = cdriver->owner; return driver_register(&cdriver->driver); } diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c index 4d98a0fddedf..69d56c7284d1 100644 --- a/drivers/s390/cio/css.c +++ b/drivers/s390/cio/css.c @@ -862,6 +862,7 @@ int css_driver_register(struct css_driver *cdrv) { cdrv->drv.name = cdrv->name; cdrv->drv.bus = &css_bus_type; + cdrv->drv.owner = cdrv->owner; return driver_register(&cdrv->drv); } EXPORT_SYMBOL_GPL(css_driver_register); diff --git a/drivers/s390/cio/css.h b/drivers/s390/cio/css.h index ee65761e8254..40598b8ee27d 100644 --- a/drivers/s390/cio/css.h +++ b/drivers/s390/cio/css.h @@ -65,6 +65,7 @@ struct pgid { */ struct subchannel; struct css_driver { + struct module *owner; unsigned int subchannel_type; struct device_driver drv; void (*irq)(struct subchannel *); diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index 933f763e9586..f80d7f5418d3 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -125,6 +125,7 @@ static void io_subchannel_ioterm(struct subchannel *); static void io_subchannel_shutdown(struct subchannel *); static struct css_driver io_subchannel_driver = { + .owner = THIS_MODULE, .subchannel_type = SUBCHANNEL_TYPE_IO, .name = "io_subchannel", .irq = io_subchannel_irq, @@ -1476,6 +1477,7 @@ int ccw_driver_register(struct ccw_driver *cdriver) drv->bus = &ccw_bus_type; drv->name = cdriver->name; + drv->owner = cdriver->owner; return driver_register(drv); } -- cgit v1.2.3-59-g8ed1b From e82a1567e4b22eb035da2499d20ddd573c9acf75 Mon Sep 17 00:00:00 2001 From: Peter Oberparleiter Date: Sat, 26 Jan 2008 14:10:48 +0100 Subject: [S390] cio: reduce cpu utilization during device scan Minimize calls to cpu intensive function get_subchannel_by_schid() by introducing function for_each_subchannel_staged() which temporarily caches the information about registered subchannels in a bitmap. Signed-off-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/chsc.c | 98 +++++++++++++-------------------------- drivers/s390/cio/css.c | 120 ++++++++++++++++++++++++++++++++++++++++-------- drivers/s390/cio/css.h | 3 ++ 3 files changed, 137 insertions(+), 84 deletions(-) diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c index 12a344c66b46..93e6f74187ee 100644 --- a/drivers/s390/cio/chsc.c +++ b/drivers/s390/cio/chsc.c @@ -136,17 +136,13 @@ static void terminate_internal_io(struct subchannel *sch) sch->driver->termination(sch); } -static int -s390_subchannel_remove_chpid(struct device *dev, void *data) +static int s390_subchannel_remove_chpid(struct subchannel *sch, void *data) { int j; int mask; - struct subchannel *sch; - struct chp_id *chpid; + struct chp_id *chpid = data; struct schib schib; - sch = to_subchannel(dev); - chpid = data; for (j = 0; j < 8; j++) { mask = 0x80 >> j; if ((sch->schib.pmcw.pim & mask) && @@ -202,12 +198,10 @@ void chsc_chp_offline(struct chp_id chpid) if (chp_get_status(chpid) <= 0) return; - bus_for_each_dev(&css_bus_type, NULL, &chpid, - s390_subchannel_remove_chpid); + for_each_subchannel_staged(s390_subchannel_remove_chpid, NULL, &chpid); } -static int -s390_process_res_acc_new_sch(struct subchannel_id schid) +static int s390_process_res_acc_new_sch(struct subchannel_id schid, void *data) { struct schib schib; /* @@ -253,18 +247,10 @@ static int get_res_chpid_mask(struct chsc_ssd_info *ssd, return 0; } -static int -__s390_process_res_acc(struct subchannel_id schid, void *data) +static int __s390_process_res_acc(struct subchannel *sch, void *data) { int chp_mask, old_lpm; - struct res_acc_data *res_data; - struct subchannel *sch; - - res_data = data; - sch = get_subchannel_by_schid(schid); - if (!sch) - /* Check if a subchannel is newly available. */ - return s390_process_res_acc_new_sch(schid); + struct res_acc_data *res_data = data; spin_lock_irq(sch->lock); chp_mask = get_res_chpid_mask(&sch->ssd_info, res_data); @@ -283,7 +269,7 @@ __s390_process_res_acc(struct subchannel_id schid, void *data) sch->driver->verify(sch); out: spin_unlock_irq(sch->lock); - put_device(&sch->dev); + return 0; } @@ -306,7 +292,8 @@ static void s390_process_res_acc (struct res_acc_data *res_data) * The more information we have (info), the less scanning * will we have to do. */ - for_each_subchannel(__s390_process_res_acc, res_data); + for_each_subchannel_staged(__s390_process_res_acc, + s390_process_res_acc_new_sch, res_data); } static int @@ -500,8 +487,7 @@ void chsc_process_crw(void) } while (sei_area->flags & 0x80); } -static int -__chp_add_new_sch(struct subchannel_id schid) +static int __chp_add_new_sch(struct subchannel_id schid, void *data) { struct schib schib; @@ -515,35 +501,27 @@ __chp_add_new_sch(struct subchannel_id schid) } -static int -__chp_add(struct subchannel_id schid, void *data) +static int __chp_add(struct subchannel *sch, void *data) { int i, mask; - struct chp_id *chpid; - struct subchannel *sch; - - chpid = data; - sch = get_subchannel_by_schid(schid); - if (!sch) - /* Check if the subchannel is now available. */ - return __chp_add_new_sch(schid); + struct chp_id *chpid = data; + spin_lock_irq(sch->lock); for (i=0; i<8; i++) { mask = 0x80 >> i; if ((sch->schib.pmcw.pim & mask) && - (sch->schib.pmcw.chpid[i] == chpid->id)) { - if (stsch(sch->schid, &sch->schib) != 0) { - /* Endgame. */ - spin_unlock_irq(sch->lock); - return -ENXIO; - } + (sch->schib.pmcw.chpid[i] == chpid->id)) break; - } } if (i==8) { spin_unlock_irq(sch->lock); return 0; } + if (stsch(sch->schid, &sch->schib)) { + spin_unlock_irq(sch->lock); + css_schedule_eval(sch->schid); + return 0; + } sch->lpm = ((sch->schib.pmcw.pim & sch->schib.pmcw.pam & sch->schib.pmcw.pom) @@ -553,7 +531,7 @@ __chp_add(struct subchannel_id schid, void *data) sch->driver->verify(sch); spin_unlock_irq(sch->lock); - put_device(&sch->dev); + return 0; } @@ -565,7 +543,8 @@ void chsc_chp_online(struct chp_id chpid) CIO_TRACE_EVENT(2, dbf_txt); if (chp_get_status(chpid) != 0) - for_each_subchannel(__chp_add, &chpid); + for_each_subchannel_staged(__chp_add, __chp_add_new_sch, + &chpid); } static void __s390_subchannel_vary_chpid(struct subchannel *sch, @@ -616,25 +595,17 @@ static void __s390_subchannel_vary_chpid(struct subchannel *sch, spin_unlock_irqrestore(sch->lock, flags); } -static int s390_subchannel_vary_chpid_off(struct device *dev, void *data) +static int s390_subchannel_vary_chpid_off(struct subchannel *sch, void *data) { - struct subchannel *sch; - struct chp_id *chpid; - - sch = to_subchannel(dev); - chpid = data; + struct chp_id *chpid = data; __s390_subchannel_vary_chpid(sch, *chpid, 0); return 0; } -static int s390_subchannel_vary_chpid_on(struct device *dev, void *data) +static int s390_subchannel_vary_chpid_on(struct subchannel *sch, void *data) { - struct subchannel *sch; - struct chp_id *chpid; - - sch = to_subchannel(dev); - chpid = data; + struct chp_id *chpid = data; __s390_subchannel_vary_chpid(sch, *chpid, 1); return 0; @@ -644,13 +615,7 @@ static int __s390_vary_chpid_on(struct subchannel_id schid, void *data) { struct schib schib; - struct subchannel *sch; - sch = get_subchannel_by_schid(schid); - if (sch) { - put_device(&sch->dev); - return 0; - } if (stsch_err(schid, &schib)) /* We're through */ return -ENXIO; @@ -670,12 +635,13 @@ int chsc_chp_vary(struct chp_id chpid, int on) * Redo PathVerification on the devices the chpid connects to */ - bus_for_each_dev(&css_bus_type, NULL, &chpid, on ? - s390_subchannel_vary_chpid_on : - s390_subchannel_vary_chpid_off); if (on) - /* Scan for new devices on varied on path. */ - for_each_subchannel(__s390_vary_chpid_on, NULL); + for_each_subchannel_staged(s390_subchannel_vary_chpid_on, + __s390_vary_chpid_on, &chpid); + else + for_each_subchannel_staged(s390_subchannel_vary_chpid_off, + NULL, &chpid); + return 0; } diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c index 69d56c7284d1..3b45bbe6cce0 100644 --- a/drivers/s390/cio/css.c +++ b/drivers/s390/cio/css.c @@ -51,6 +51,62 @@ for_each_subchannel(int(*fn)(struct subchannel_id, void *), void *data) return ret; } +struct cb_data { + void *data; + struct idset *set; + int (*fn_known_sch)(struct subchannel *, void *); + int (*fn_unknown_sch)(struct subchannel_id, void *); +}; + +static int call_fn_known_sch(struct device *dev, void *data) +{ + struct subchannel *sch = to_subchannel(dev); + struct cb_data *cb = data; + int rc = 0; + + idset_sch_del(cb->set, sch->schid); + if (cb->fn_known_sch) + rc = cb->fn_known_sch(sch, cb->data); + return rc; +} + +static int call_fn_unknown_sch(struct subchannel_id schid, void *data) +{ + struct cb_data *cb = data; + int rc = 0; + + if (idset_sch_contains(cb->set, schid)) + rc = cb->fn_unknown_sch(schid, cb->data); + return rc; +} + +int for_each_subchannel_staged(int (*fn_known)(struct subchannel *, void *), + int (*fn_unknown)(struct subchannel_id, + void *), void *data) +{ + struct cb_data cb; + int rc; + + cb.set = idset_sch_new(); + if (!cb.set) + return -ENOMEM; + idset_fill(cb.set); + cb.data = data; + cb.fn_known_sch = fn_known; + cb.fn_unknown_sch = fn_unknown; + /* Process registered subchannels. */ + rc = bus_for_each_dev(&css_bus_type, NULL, &cb, call_fn_known_sch); + if (rc) + goto out; + /* Process unregistered subchannels. */ + if (fn_unknown) + rc = for_each_subchannel(call_fn_unknown_sch, &cb); +out: + idset_free(cb.set); + + return rc; +} + static struct subchannel * css_alloc_subchannel(struct subchannel_id schid) { @@ -402,20 +458,56 @@ static int __init slow_subchannel_init(void) return 0; } -static void css_slow_path_func(struct work_struct *unused) +static int slow_eval_known_fn(struct subchannel *sch, void *data) { - struct subchannel_id schid; + int eval; + int rc; - CIO_TRACE_EVENT(4, "slowpath"); spin_lock_irq(&slow_subchannel_lock); - init_subchannel_id(&schid); - while (idset_sch_get_first(slow_subchannel_set, &schid)) { - idset_sch_del(slow_subchannel_set, schid); - spin_unlock_irq(&slow_subchannel_lock); - css_evaluate_subchannel(schid, 1); - spin_lock_irq(&slow_subchannel_lock); + eval = idset_sch_contains(slow_subchannel_set, sch->schid); + idset_sch_del(slow_subchannel_set, sch->schid); + spin_unlock_irq(&slow_subchannel_lock); + if (eval) { + rc = css_evaluate_known_subchannel(sch, 1); + if (rc == -EAGAIN) + css_schedule_eval(sch->schid); } + return 0; +} + +static int slow_eval_unknown_fn(struct subchannel_id schid, void *data) +{ + int eval; + int rc = 0; + + spin_lock_irq(&slow_subchannel_lock); + eval = idset_sch_contains(slow_subchannel_set, schid); + idset_sch_del(slow_subchannel_set, schid); spin_unlock_irq(&slow_subchannel_lock); + if (eval) { + rc = css_evaluate_new_subchannel(schid, 1); + switch (rc) { + case -EAGAIN: + css_schedule_eval(schid); + rc = 0; + break; + case -ENXIO: + case -ENOMEM: + case -EIO: + /* These should abort looping */ + break; + default: + rc = 0; + } + } + return rc; +} + +static void css_slow_path_func(struct work_struct *unused) +{ + CIO_TRACE_EVENT(4, "slowpath"); + for_each_subchannel_staged(slow_eval_known_fn, slow_eval_unknown_fn, + NULL); } static DECLARE_WORK(slow_path_work, css_slow_path_func); @@ -444,7 +536,6 @@ void css_schedule_eval_all(void) /* Reprobe subchannel if unregistered. */ static int reprobe_subchannel(struct subchannel_id schid, void *data) { - struct subchannel *sch; int ret; CIO_MSG_EVENT(6, "cio: reprobe 0.%x.%04x\n", @@ -452,13 +543,6 @@ static int reprobe_subchannel(struct subchannel_id schid, void *data) if (need_reprobe) return -EAGAIN; - sch = get_subchannel_by_schid(schid); - if (sch) { - /* Already known. */ - put_device(&sch->dev); - return 0; - } - ret = css_probe_device(schid); switch (ret) { case 0: @@ -486,7 +570,7 @@ static void reprobe_all(struct work_struct *unused) /* Make sure initial subchannel scan is done. */ wait_event(ccw_device_init_wq, atomic_read(&ccw_device_init_count) == 0); - ret = for_each_subchannel(reprobe_subchannel, NULL); + ret = for_each_subchannel_staged(NULL, reprobe_subchannel, NULL); CIO_MSG_EVENT(2, "reprobe done (rc=%d, need_reprobe=%d)\n", ret, need_reprobe); diff --git a/drivers/s390/cio/css.h b/drivers/s390/cio/css.h index 40598b8ee27d..b70554523552 100644 --- a/drivers/s390/cio/css.h +++ b/drivers/s390/cio/css.h @@ -91,6 +91,9 @@ extern void css_driver_unregister(struct css_driver *); extern void css_sch_device_unregister(struct subchannel *); extern struct subchannel * get_subchannel_by_schid(struct subchannel_id); extern int css_init_done; +int for_each_subchannel_staged(int (*fn_known)(struct subchannel *, void *), + int (*fn_unknown)(struct subchannel_id, + void *), void *data); extern int for_each_subchannel(int(*fn)(struct subchannel_id, void *), void *); extern void css_process_crw(int, int); extern void css_reiterate_subchannels(void); -- cgit v1.2.3-59-g8ed1b From 46258ab5e42eed5cbe20a83b732d6538c49ea2fe Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Sat, 26 Jan 2008 14:10:49 +0100 Subject: [S390] cio: Delete timer in ccw_device_verify_done(). Make sure pending timers are always deleted, even if we don't go through ccw_device_done(). Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/device_fsm.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c index 669e6a75f54f..485741a12125 100644 --- a/drivers/s390/cio/device_fsm.c +++ b/drivers/s390/cio/device_fsm.c @@ -641,9 +641,10 @@ ccw_device_verify_done(struct ccw_device *cdev, int err) default: /* Reset oper notify indication after verify error. */ cdev->private->flags.donotify = 0; - if (cdev->online) + if (cdev->online) { + ccw_device_set_timeout(cdev, 0); dev_fsm_event(cdev, DEV_EVENT_NOTOPER); - else + } else ccw_device_done(cdev, DEV_STATE_NOT_OPER); break; } -- cgit v1.2.3-59-g8ed1b From 1a908c735aed44c8bbed303371202e416813b271 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Sat, 26 Jan 2008 14:10:50 +0100 Subject: [S390] cio: Fix ungroup vs. machine check race in ccwgroup. There are two ways for a ccwgroup device to be unregistered: Via the ungroup attribute, or when on of the slave devices is killed by a machine check. As we have to unregister the ccwgroup device via a callback, we'll now have to check whether it hasn't been already unregistered because of a machine check. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/ccwgroup.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c index dc1c5f4dd256..3964056a9a47 100644 --- a/drivers/s390/cio/ccwgroup.c +++ b/drivers/s390/cio/ccwgroup.c @@ -75,8 +75,10 @@ static void ccwgroup_ungroup_callback(struct device *dev) struct ccwgroup_device *gdev = to_ccwgroupdev(dev); mutex_lock(&gdev->reg_mutex); - __ccwgroup_remove_symlinks(gdev); - device_unregister(dev); + if (device_is_registered(&gdev->dev)) { + __ccwgroup_remove_symlinks(gdev); + device_unregister(dev); + } mutex_unlock(&gdev->reg_mutex); } -- cgit v1.2.3-59-g8ed1b From 808e48882316dd4a325cd1cc382516945edad77d Mon Sep 17 00:00:00 2001 From: Michael Ernst Date: Sat, 26 Jan 2008 14:10:51 +0100 Subject: [S390] cio: memory leak in cio processing Allocated kernel memory for locks is not freed in case of subchannel found to be invalid. Signed-off-by: Michael Ernst Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/cio.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c index f16c15c13f6e..11f632f9db58 100644 --- a/drivers/s390/cio/cio.c +++ b/drivers/s390/cio/cio.c @@ -577,8 +577,11 @@ cio_validate_subchannel (struct subchannel *sch, struct subchannel_id schid) } /* Initialization for io subchannels. */ - if (!css_sch_is_valid(&sch->schib)) - return -ENODEV; + if (!css_sch_is_valid(&sch->schib)) { + err = -ENODEV; + goto out; + } + /* Devno is valid. */ if (is_blacklisted (sch->schid.ssid, sch->schib.pmcw.dev)) { /* -- cgit v1.2.3-59-g8ed1b From 90ab133603d066e850fc9ed297b6eb52f888dd25 Mon Sep 17 00:00:00 2001 From: Peter Oberparleiter Date: Sat, 26 Jan 2008 14:10:52 +0100 Subject: [S390] cio: introduce timed recovery procedure Add a timed recovery procedure to reactivate ccw devices in cases where HW/VM events are not sufficient to allow for proper recovery of reappearing channel paths. Signed-off-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/device.c | 63 +++++++++++++++++++++++++++++++++++++++++++ drivers/s390/cio/device.h | 2 ++ drivers/s390/cio/device_fsm.c | 2 ++ 3 files changed, 67 insertions(+) diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index f80d7f5418d3..d35dc3f25d06 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -30,6 +31,11 @@ #include "ioasm.h" #include "io_sch.h" +static struct timer_list recovery_timer; +static spinlock_t recovery_lock; +static int recovery_phase; +static const unsigned long recovery_delay[] = { 3, 30, 300 }; + /******************* bus type handling ***********************/ /* The Linux driver model distinguishes between a bus type and @@ -142,6 +148,8 @@ struct workqueue_struct *ccw_device_notify_work; wait_queue_head_t ccw_device_init_wq; atomic_t ccw_device_init_count; +static void recovery_func(unsigned long data); + static int __init init_ccw_bus_type (void) { @@ -149,6 +157,7 @@ init_ccw_bus_type (void) init_waitqueue_head(&ccw_device_init_wq); atomic_set(&ccw_device_init_count, 0); + setup_timer(&recovery_timer, recovery_func, 0); ccw_device_work = create_singlethread_workqueue("cio"); if (!ccw_device_work) @@ -1503,6 +1512,60 @@ ccw_device_get_subchannel_id(struct ccw_device *cdev) return sch->schid; } +static int recovery_check(struct device *dev, void *data) +{ + struct ccw_device *cdev = to_ccwdev(dev); + int *redo = data; + + spin_lock_irq(cdev->ccwlock); + switch (cdev->private->state) { + case DEV_STATE_DISCONNECTED: + CIO_MSG_EVENT(3, "recovery: trigger 0.%x.%04x\n", + cdev->private->dev_id.ssid, + cdev->private->dev_id.devno); + dev_fsm_event(cdev, DEV_EVENT_VERIFY); + *redo = 1; + break; + case DEV_STATE_DISCONNECTED_SENSE_ID: + *redo = 1; + break; + } + spin_unlock_irq(cdev->ccwlock); + + return 0; +} + +static void recovery_func(unsigned long data) +{ + int redo = 0; + + bus_for_each_dev(&ccw_bus_type, NULL, &redo, recovery_check); + if (redo) { + spin_lock_irq(&recovery_lock); + if (!timer_pending(&recovery_timer)) { + if (recovery_phase < ARRAY_SIZE(recovery_delay) - 1) + recovery_phase++; + mod_timer(&recovery_timer, jiffies + + recovery_delay[recovery_phase] * HZ); + } + spin_unlock_irq(&recovery_lock); + } else + CIO_MSG_EVENT(2, "recovery: end\n"); +} + +void ccw_device_schedule_recovery(void) +{ + unsigned long flags; + + CIO_MSG_EVENT(2, "recovery: schedule\n"); + spin_lock_irqsave(&recovery_lock, flags); + if (!timer_pending(&recovery_timer) || (recovery_phase != 0)) { + recovery_phase = 0; + mod_timer(&recovery_timer, jiffies + recovery_delay[0] * HZ); + } + spin_unlock_irqrestore(&recovery_lock, flags); +} + MODULE_LICENSE("GPL"); EXPORT_SYMBOL(ccw_device_set_online); EXPORT_SYMBOL(ccw_device_set_offline); diff --git a/drivers/s390/cio/device.h b/drivers/s390/cio/device.h index 87576fe2c7c4..d40a2ffaa000 100644 --- a/drivers/s390/cio/device.h +++ b/drivers/s390/cio/device.h @@ -88,6 +88,8 @@ int ccw_device_recognition(struct ccw_device *); int ccw_device_online(struct ccw_device *); int ccw_device_offline(struct ccw_device *); +void ccw_device_schedule_recovery(void); + /* Function prototypes for device status and basic sense stuff. */ void ccw_device_accumulate_irb(struct ccw_device *, struct irb *); void ccw_device_accumulate_basic_sense(struct ccw_device *, struct irb *); diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c index 485741a12125..4b92c84fb438 100644 --- a/drivers/s390/cio/device_fsm.c +++ b/drivers/s390/cio/device_fsm.c @@ -61,6 +61,8 @@ device_set_disconnected(struct subchannel *sch) ccw_device_set_timeout(cdev, 0); cdev->private->flags.fake_irb = 0; cdev->private->state = DEV_STATE_DISCONNECTED; + if (cdev->online) + ccw_device_schedule_recovery(); } void device_set_intretry(struct subchannel *sch) -- cgit v1.2.3-59-g8ed1b From 8d08be928eb9e90f1456d34aa0712fa9038674e0 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Sat, 26 Jan 2008 14:10:53 +0100 Subject: [S390] qdio: Remove double checked value. Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/qdio.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/s390/cio/qdio.c b/drivers/s390/cio/qdio.c index 7a353db8564f..e2a781b6b21d 100644 --- a/drivers/s390/cio/qdio.c +++ b/drivers/s390/cio/qdio.c @@ -1408,8 +1408,7 @@ __tiqdio_inbound_processing(struct qdio_q *q, int spare_ind_was_set) if (q->hydra_gives_outbound_pcis) { if (!q->siga_sync_done_on_thinints) { SYNC_MEMORY_ALL; - } else if ((!q->siga_sync_done_on_outb_tis)&& - (q->hydra_gives_outbound_pcis)) { + } else if (!q->siga_sync_done_on_outb_tis) { SYNC_MEMORY_ALL_OUTB; } } else { -- cgit v1.2.3-59-g8ed1b From dfa77f611ff295598e218aa0eb6efa73a5cf26d0 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Sat, 26 Jan 2008 14:10:54 +0100 Subject: [S390] qdio: set QDIO_ACTIVATE_TIMEOUT to 5s Current definition of QDIO_ACTIVATE_TIMEOUT results in value 0. Thus it may cause endless wait in function qdio_activate(). Signed-off-by: Ursula Braun Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/qdio.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/cio/qdio.h b/drivers/s390/cio/qdio.h index 6d7aad18f6f0..37870e4e938e 100644 --- a/drivers/s390/cio/qdio.h +++ b/drivers/s390/cio/qdio.h @@ -57,7 +57,7 @@ of the queue to 0 */ #define QDIO_ESTABLISH_TIMEOUT (1*HZ) -#define QDIO_ACTIVATE_TIMEOUT ((5*HZ)>>10) +#define QDIO_ACTIVATE_TIMEOUT (5*HZ) #define QDIO_CLEANUP_CLEAR_TIMEOUT (20*HZ) #define QDIO_CLEANUP_HALT_TIMEOUT (10*HZ) #define QDIO_FORCE_CHECK_TIMEOUT (10*HZ) -- cgit v1.2.3-59-g8ed1b From c05ffc4f2b208da8ba7d3a9b5ab886c76f8939b5 Mon Sep 17 00:00:00 2001 From: Michael Ernst Date: Sat, 26 Jan 2008 14:10:55 +0100 Subject: [S390] sclp: sysfs interface for SCLP cpi Signed-off-by: Michael Ernst Signed-off-by: Martin Schwidefsky --- drivers/s390/char/Makefile | 2 +- drivers/s390/char/sclp_cpi.c | 246 ++---------------------- drivers/s390/char/sclp_cpi_sys.c | 400 +++++++++++++++++++++++++++++++++++++++ drivers/s390/char/sclp_cpi_sys.h | 15 ++ 4 files changed, 432 insertions(+), 231 deletions(-) create mode 100644 drivers/s390/char/sclp_cpi_sys.c create mode 100644 drivers/s390/char/sclp_cpi_sys.h diff --git a/drivers/s390/char/Makefile b/drivers/s390/char/Makefile index 130de19916f2..bee3a3af691d 100644 --- a/drivers/s390/char/Makefile +++ b/drivers/s390/char/Makefile @@ -3,7 +3,7 @@ # obj-y += ctrlchar.o keyboard.o defkeymap.o sclp.o sclp_rw.o sclp_quiesce.o \ - sclp_info.o sclp_config.o sclp_chp.o + sclp_info.o sclp_config.o sclp_chp.o sclp_cpi_sys.o obj-$(CONFIG_TN3270) += raw3270.o obj-$(CONFIG_TN3270_CONSOLE) += con3270.o diff --git a/drivers/s390/char/sclp_cpi.c b/drivers/s390/char/sclp_cpi.c index 82a13d9fdfe4..5716487b8c9d 100644 --- a/drivers/s390/char/sclp_cpi.c +++ b/drivers/s390/char/sclp_cpi.c @@ -1,255 +1,41 @@ /* - * Author: Martin Peschke - * Copyright (C) 2001 IBM Entwicklung GmbH, IBM Corporation + * drivers/s390/char/sclp_cpi.c + * SCLP control programm identification * - * SCLP Control-Program Identification. + * Copyright IBM Corp. 2001, 2007 + * Author(s): Martin Peschke + * Michael Ernst */ -#include #include #include #include -#include -#include -#include -#include -#include -#include -#include - -#include "sclp.h" -#include "sclp_rw.h" - -#define CPI_LENGTH_SYSTEM_TYPE 8 -#define CPI_LENGTH_SYSTEM_NAME 8 -#define CPI_LENGTH_SYSPLEX_NAME 8 - -struct cpi_evbuf { - struct evbuf_header header; - u8 id_format; - u8 reserved0; - u8 system_type[CPI_LENGTH_SYSTEM_TYPE]; - u64 reserved1; - u8 system_name[CPI_LENGTH_SYSTEM_NAME]; - u64 reserved2; - u64 system_level; - u64 reserved3; - u8 sysplex_name[CPI_LENGTH_SYSPLEX_NAME]; - u8 reserved4[16]; -} __attribute__((packed)); - -struct cpi_sccb { - struct sccb_header header; - struct cpi_evbuf cpi_evbuf; -} __attribute__((packed)); - -/* Event type structure for write message and write priority message */ -static struct sclp_register sclp_cpi_event = -{ - .send_mask = EVTYP_CTLPROGIDENT_MASK -}; +#include +#include "sclp_cpi_sys.h" MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Identify this operating system instance " + "to the System z hardware"); +MODULE_AUTHOR("Martin Peschke , " + "Michael Ernst "); -MODULE_AUTHOR( - "Martin Peschke, IBM Deutschland Entwicklung GmbH " - ""); - -MODULE_DESCRIPTION( - "identify this operating system instance to the S/390 " - "or zSeries hardware"); +static char *system_name = ""; +static char *sysplex_name = ""; -static char *system_name = NULL; module_param(system_name, charp, 0); MODULE_PARM_DESC(system_name, "e.g. hostname - max. 8 characters"); - -static char *sysplex_name = NULL; -#ifdef ALLOW_SYSPLEX_NAME module_param(sysplex_name, charp, 0); MODULE_PARM_DESC(sysplex_name, "if applicable - max. 8 characters"); -#endif - -/* use default value for this field (as well as for system level) */ -static char *system_type = "LINUX"; -static int -cpi_check_parms(void) +static int __init cpi_module_init(void) { - /* reject if no system type specified */ - if (!system_type) { - printk("cpi: bug: no system type specified\n"); - return -EINVAL; - } - - /* reject if system type larger than 8 characters */ - if (strlen(system_type) > CPI_LENGTH_SYSTEM_NAME) { - printk("cpi: bug: system type has length of %li characters - " - "only %i characters supported\n", - strlen(system_type), CPI_LENGTH_SYSTEM_TYPE); - return -EINVAL; - } - - /* reject if no system name specified */ - if (!system_name) { - printk("cpi: no system name specified\n"); - return -EINVAL; - } - - /* reject if system name larger than 8 characters */ - if (strlen(system_name) > CPI_LENGTH_SYSTEM_NAME) { - printk("cpi: system name has length of %li characters - " - "only %i characters supported\n", - strlen(system_name), CPI_LENGTH_SYSTEM_NAME); - return -EINVAL; - } - - /* reject if specified sysplex name larger than 8 characters */ - if (sysplex_name && strlen(sysplex_name) > CPI_LENGTH_SYSPLEX_NAME) { - printk("cpi: sysplex name has length of %li characters" - " - only %i characters supported\n", - strlen(sysplex_name), CPI_LENGTH_SYSPLEX_NAME); - return -EINVAL; - } - return 0; + return sclp_cpi_set_data(system_name, sysplex_name, "LINUX", + LINUX_VERSION_CODE); } -static void -cpi_callback(struct sclp_req *req, void *data) -{ - struct semaphore *sem; - - sem = (struct semaphore *) data; - up(sem); -} - -static struct sclp_req * -cpi_prepare_req(void) -{ - struct sclp_req *req; - struct cpi_sccb *sccb; - struct cpi_evbuf *evb; - - req = kmalloc(sizeof(struct sclp_req), GFP_KERNEL); - if (req == NULL) - return ERR_PTR(-ENOMEM); - sccb = (struct cpi_sccb *) __get_free_page(GFP_KERNEL | GFP_DMA); - if (sccb == NULL) { - kfree(req); - return ERR_PTR(-ENOMEM); - } - memset(sccb, 0, sizeof(struct cpi_sccb)); - - /* setup SCCB for Control-Program Identification */ - sccb->header.length = sizeof(struct cpi_sccb); - sccb->cpi_evbuf.header.length = sizeof(struct cpi_evbuf); - sccb->cpi_evbuf.header.type = 0x0B; - evb = &sccb->cpi_evbuf; - - /* set system type */ - memset(evb->system_type, ' ', CPI_LENGTH_SYSTEM_TYPE); - memcpy(evb->system_type, system_type, strlen(system_type)); - sclp_ascebc_str(evb->system_type, CPI_LENGTH_SYSTEM_TYPE); - EBC_TOUPPER(evb->system_type, CPI_LENGTH_SYSTEM_TYPE); - - /* set system name */ - memset(evb->system_name, ' ', CPI_LENGTH_SYSTEM_NAME); - memcpy(evb->system_name, system_name, strlen(system_name)); - sclp_ascebc_str(evb->system_name, CPI_LENGTH_SYSTEM_NAME); - EBC_TOUPPER(evb->system_name, CPI_LENGTH_SYSTEM_NAME); - - /* set system level */ - evb->system_level = LINUX_VERSION_CODE; - - /* set sysplex name */ - if (sysplex_name) { - memset(evb->sysplex_name, ' ', CPI_LENGTH_SYSPLEX_NAME); - memcpy(evb->sysplex_name, sysplex_name, strlen(sysplex_name)); - sclp_ascebc_str(evb->sysplex_name, CPI_LENGTH_SYSPLEX_NAME); - EBC_TOUPPER(evb->sysplex_name, CPI_LENGTH_SYSPLEX_NAME); - } - - /* prepare request data structure presented to SCLP driver */ - req->command = SCLP_CMDW_WRITE_EVENT_DATA; - req->sccb = sccb; - req->status = SCLP_REQ_FILLED; - req->callback = cpi_callback; - return req; -} - -static void -cpi_free_req(struct sclp_req *req) -{ - free_page((unsigned long) req->sccb); - kfree(req); -} - -static int __init -cpi_module_init(void) -{ - struct semaphore sem; - struct sclp_req *req; - int rc; - - rc = cpi_check_parms(); - if (rc) - return rc; - - rc = sclp_register(&sclp_cpi_event); - if (rc) { - /* could not register sclp event. Die. */ - printk(KERN_WARNING "cpi: could not register to hardware " - "console.\n"); - return -EINVAL; - } - if (!(sclp_cpi_event.sclp_send_mask & EVTYP_CTLPROGIDENT_MASK)) { - printk(KERN_WARNING "cpi: no control program identification " - "support\n"); - sclp_unregister(&sclp_cpi_event); - return -EOPNOTSUPP; - } - - req = cpi_prepare_req(); - if (IS_ERR(req)) { - printk(KERN_WARNING "cpi: couldn't allocate request\n"); - sclp_unregister(&sclp_cpi_event); - return PTR_ERR(req); - } - - /* Prepare semaphore */ - sema_init(&sem, 0); - req->callback_data = &sem; - /* Add request to sclp queue */ - rc = sclp_add_request(req); - if (rc) { - printk(KERN_WARNING "cpi: could not start request\n"); - cpi_free_req(req); - sclp_unregister(&sclp_cpi_event); - return rc; - } - /* make "insmod" sleep until callback arrives */ - down(&sem); - - rc = ((struct cpi_sccb *) req->sccb)->header.response_code; - if (rc != 0x0020) { - printk(KERN_WARNING "cpi: failed with response code 0x%x\n", - rc); - rc = -ECOMM; - } else - rc = 0; - - cpi_free_req(req); - sclp_unregister(&sclp_cpi_event); - - return rc; -} - - static void __exit cpi_module_exit(void) { } - -/* declare driver module init/cleanup functions */ module_init(cpi_module_init); module_exit(cpi_module_exit); - diff --git a/drivers/s390/char/sclp_cpi_sys.c b/drivers/s390/char/sclp_cpi_sys.c new file mode 100644 index 000000000000..41617032afdc --- /dev/null +++ b/drivers/s390/char/sclp_cpi_sys.c @@ -0,0 +1,400 @@ +/* + * drivers/s390/char/sclp_cpi_sys.c + * SCLP control program identification sysfs interface + * + * Copyright IBM Corp. 2001, 2007 + * Author(s): Martin Peschke + * Michael Ernst + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "sclp.h" +#include "sclp_rw.h" +#include "sclp_cpi_sys.h" + +#define CPI_LENGTH_NAME 8 +#define CPI_LENGTH_LEVEL 16 + +struct cpi_evbuf { + struct evbuf_header header; + u8 id_format; + u8 reserved0; + u8 system_type[CPI_LENGTH_NAME]; + u64 reserved1; + u8 system_name[CPI_LENGTH_NAME]; + u64 reserved2; + u64 system_level; + u64 reserved3; + u8 sysplex_name[CPI_LENGTH_NAME]; + u8 reserved4[16]; +} __attribute__((packed)); + +struct cpi_sccb { + struct sccb_header header; + struct cpi_evbuf cpi_evbuf; +} __attribute__((packed)); + +static struct sclp_register sclp_cpi_event = { + .send_mask = EVTYP_CTLPROGIDENT_MASK, +}; + +static char system_name[CPI_LENGTH_NAME + 1]; +static char sysplex_name[CPI_LENGTH_NAME + 1]; +static char system_type[CPI_LENGTH_NAME + 1]; +static u64 system_level; + +static void set_data(char *field, char *data) +{ + memset(field, ' ', CPI_LENGTH_NAME); + memcpy(field, data, strlen(data)); + sclp_ascebc_str(field, CPI_LENGTH_NAME); +} + +static void cpi_callback(struct sclp_req *req, void *data) +{ + struct completion *completion = data; + + complete(completion); +} + +static struct sclp_req *cpi_prepare_req(void) +{ + struct sclp_req *req; + struct cpi_sccb *sccb; + struct cpi_evbuf *evb; + + req = kzalloc(sizeof(struct sclp_req), GFP_KERNEL); + if (!req) + return ERR_PTR(-ENOMEM); + sccb = (struct cpi_sccb *) get_zeroed_page(GFP_KERNEL | GFP_DMA); + if (!sccb) { + kfree(req); + return ERR_PTR(-ENOMEM); + } + + /* setup SCCB for Control-Program Identification */ + sccb->header.length = sizeof(struct cpi_sccb); + sccb->cpi_evbuf.header.length = sizeof(struct cpi_evbuf); + sccb->cpi_evbuf.header.type = 0x0b; + evb = &sccb->cpi_evbuf; + + /* set system type */ + set_data(evb->system_type, system_type); + + /* set system name */ + set_data(evb->system_name, system_name); + + /* set sytem level */ + evb->system_level = system_level; + + /* set sysplex name */ + set_data(evb->sysplex_name, sysplex_name); + + /* prepare request data structure presented to SCLP driver */ + req->command = SCLP_CMDW_WRITE_EVENT_DATA; + req->sccb = sccb; + req->status = SCLP_REQ_FILLED; + req->callback = cpi_callback; + return req; +} + +static void cpi_free_req(struct sclp_req *req) +{ + free_page((unsigned long) req->sccb); + kfree(req); +} + +static int cpi_req(void) +{ + struct completion completion; + struct sclp_req *req; + int rc; + int response; + + rc = sclp_register(&sclp_cpi_event); + if (rc) { + printk(KERN_WARNING "cpi: could not register " + "to hardware console.\n"); + goto out; + } + if (!(sclp_cpi_event.sclp_send_mask & EVTYP_CTLPROGIDENT_MASK)) { + printk(KERN_WARNING "cpi: no control program " + "identification support\n"); + rc = -EOPNOTSUPP; + goto out_unregister; + } + + req = cpi_prepare_req(); + if (IS_ERR(req)) { + printk(KERN_WARNING "cpi: could not allocate request\n"); + rc = PTR_ERR(req); + goto out_unregister; + } + + init_completion(&completion); + req->callback_data = &completion; + + /* Add request to sclp queue */ + rc = sclp_add_request(req); + if (rc) { + printk(KERN_WARNING "cpi: could not start request\n"); + goto out_free_req; + } + + wait_for_completion(&completion); + + if (req->status != SCLP_REQ_DONE) { + printk(KERN_WARNING "cpi: request failed (status=0x%02x)\n", + req->status); + rc = -EIO; + goto out_free_req; + } + + response = ((struct cpi_sccb *) req->sccb)->header.response_code; + if (response != 0x0020) { + printk(KERN_WARNING "cpi: failed with " + "response code 0x%x\n", response); + rc = -EIO; + } + +out_free_req: + cpi_free_req(req); + +out_unregister: + sclp_unregister(&sclp_cpi_event); + +out: + return rc; +} + +static int check_string(const char *attr, const char *str) +{ + size_t len; + size_t i; + + len = strlen(str); + + if ((len > 0) && (str[len - 1] == '\n')) + len--; + + if (len > CPI_LENGTH_NAME) + return -EINVAL; + + for (i = 0; i < len ; i++) { + if (isalpha(str[i]) || isdigit(str[i]) || + strchr("$@# ", str[i])) + continue; + return -EINVAL; + } + + return 0; +} + +static void set_string(char *attr, const char *value) +{ + size_t len; + size_t i; + + len = strlen(value); + + if ((len > 0) && (value[len - 1] == '\n')) + len--; + + for (i = 0; i < CPI_LENGTH_NAME; i++) { + if (i < len) + attr[i] = toupper(value[i]); + else + attr[i] = ' '; + } +} + +static ssize_t system_name_show(struct kobject *kobj, + struct kobj_attribute *attr, char *page) +{ + return snprintf(page, PAGE_SIZE, "%s\n", system_name); +} + +static ssize_t system_name_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, + size_t len) +{ + int rc; + + rc = check_string("system_name", buf); + if (rc) + return rc; + + set_string(system_name, buf); + + return len; +} + +static struct kobj_attribute system_name_attr = + __ATTR(system_name, 0644, system_name_show, system_name_store); + +static ssize_t sysplex_name_show(struct kobject *kobj, + struct kobj_attribute *attr, char *page) +{ + return snprintf(page, PAGE_SIZE, "%s\n", sysplex_name); +} + +static ssize_t sysplex_name_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, + size_t len) +{ + int rc; + + rc = check_string("sysplex_name", buf); + if (rc) + return rc; + + set_string(sysplex_name, buf); + + return len; +} + +static struct kobj_attribute sysplex_name_attr = + __ATTR(sysplex_name, 0644, sysplex_name_show, sysplex_name_store); + +static ssize_t system_type_show(struct kobject *kobj, + struct kobj_attribute *attr, char *page) +{ + return snprintf(page, PAGE_SIZE, "%s\n", system_type); +} + +static ssize_t system_type_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, + size_t len) +{ + int rc; + + rc = check_string("system_type", buf); + if (rc) + return rc; + + set_string(system_type, buf); + + return len; +} + +static struct kobj_attribute system_type_attr = + __ATTR(system_type, 0644, system_type_show, system_type_store); + +static ssize_t system_level_show(struct kobject *kobj, + struct kobj_attribute *attr, char *page) +{ + unsigned long long level = system_level; + + return snprintf(page, PAGE_SIZE, "%#018llx\n", level); +} + +static ssize_t system_level_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, + size_t len) +{ + unsigned long long level; + char *endp; + + level = simple_strtoull(buf, &endp, 16); + + if (endp == buf) + return -EINVAL; + if (*endp == '\n') + endp++; + if (*endp) + return -EINVAL; + + system_level = level; + + return len; +} + +static struct kobj_attribute system_level_attr = + __ATTR(system_level, 0644, system_level_show, system_level_store); + +static ssize_t set_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t len) +{ + int rc; + + rc = cpi_req(); + if (rc) + return rc; + + return len; +} + +static struct kobj_attribute set_attr = __ATTR(set, 0200, NULL, set_store); + +static struct attribute *cpi_attrs[] = { + &system_name_attr.attr, + &sysplex_name_attr.attr, + &system_type_attr.attr, + &system_level_attr.attr, + &set_attr.attr, + NULL, +}; + +static struct attribute_group cpi_attr_group = { + .attrs = cpi_attrs, +}; + +static struct kset *cpi_kset; + +int sclp_cpi_set_data(const char *system, const char *sysplex, const char *type, + const u64 level) +{ + int rc; + + rc = check_string("system_name", system); + if (rc) + return rc; + rc = check_string("sysplex_name", sysplex); + if (rc) + return rc; + rc = check_string("system_type", type); + if (rc) + return rc; + + set_string(system_name, system); + set_string(sysplex_name, sysplex); + set_string(system_type, type); + system_level = level; + + return cpi_req(); +} +EXPORT_SYMBOL(sclp_cpi_set_data); + +static int __init cpi_init(void) +{ + int rc; + + cpi_kset = kset_create_and_add("cpi", NULL, firmware_kobj); + if (!cpi_kset) + return -ENOMEM; + + rc = sysfs_create_group(&cpi_kset->kobj, &cpi_attr_group); + if (rc) + kset_unregister(cpi_kset); + + return rc; +} + +__initcall(cpi_init); diff --git a/drivers/s390/char/sclp_cpi_sys.h b/drivers/s390/char/sclp_cpi_sys.h new file mode 100644 index 000000000000..deef3e6ff496 --- /dev/null +++ b/drivers/s390/char/sclp_cpi_sys.h @@ -0,0 +1,15 @@ +/* + * drivers/s390/char/sclp_cpi_sys.h + * SCLP control program identification sysfs interface + * + * Copyright IBM Corp. 2007 + * Author(s): Michael Ernst + */ + +#ifndef __SCLP_CPI_SYS_H__ +#define __SCLP_CPI_SYS_H__ + +int sclp_cpi_set_data(const char *system, const char *sysplex, + const char *type, u64 level); + +#endif /* __SCLP_CPI_SYS_H__ */ -- cgit v1.2.3-59-g8ed1b From 08d07968277cd898c88bf12b7720d89c02c4f139 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Sat, 26 Jan 2008 14:10:56 +0100 Subject: [S390] Standby cpu activation/deactivation. Add a new interface so that cpus can be put into standby state and configured state. Only offline cpus can be put into standby state or configured state. For that the new percpu sysfs attribute "configure" must be used. To put a cpu in standby state a "0" must be written to the attribute. In order to switch it into configured state a "1" must be written to the attribute. Only cpus in configured state can be brought online. In addition this patch introduces a static mapping of physical to logical cpus. As a result only the sysfs directories of present cpus will be created. To scan for new cpus the new sysfs attribute "rescan" must be used. Writing to /sys/devices/system/cpu/rescan will trigger a rescan of cpus and will create directories for new cpus. On IPL only configured cpus will be used. And on reboot/shutdown all cpus will remain in their current state (configured/standby). Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/early.c | 3 +- arch/s390/kernel/setup.c | 2 +- arch/s390/kernel/smp.c | 401 ++++++++++++++++++++++++++++++++++-------- drivers/s390/char/Makefile | 2 +- drivers/s390/char/sclp.h | 4 +- drivers/s390/char/sclp_cmd.c | 319 +++++++++++++++++++++++++++++++++ drivers/s390/char/sclp_info.c | 116 ------------ include/asm-s390/sclp.h | 21 ++- 8 files changed, 675 insertions(+), 193 deletions(-) create mode 100644 drivers/s390/char/sclp_cmd.c delete mode 100644 drivers/s390/char/sclp_info.c diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c index 1b3af7dab816..c7cbb0114147 100644 --- a/arch/s390/kernel/early.c +++ b/arch/s390/kernel/early.c @@ -276,8 +276,9 @@ void __init startup_init(void) create_kernel_nss(); sort_main_extable(); setup_lowcore_early(); - sclp_readinfo_early(); + sclp_read_info_early(); sclp_facilities_detect(); + sclp_read_cpu_info_early(); memsize = sclp_memory_detect(); #ifndef CONFIG_64BIT /* diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 577aa7dd660e..d68a4025486e 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -920,7 +920,7 @@ setup_arch(char **cmdline_p) void __cpuinit print_cpu_info(struct cpuinfo_S390 *cpuinfo) { - printk("cpu %d " + printk(KERN_INFO "cpu %d " #ifdef CONFIG_SMP "phys_idx=%d " #endif diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 264ea906db4c..66fe28930d82 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -42,6 +42,7 @@ #include #include #include +#include #include /* @@ -58,6 +59,22 @@ EXPORT_SYMBOL(cpu_possible_map); static struct task_struct *current_set[NR_CPUS]; +static u8 smp_cpu_type; +static int smp_use_sigp_detection; + +enum s390_cpu_state { + CPU_STATE_STANDBY, + CPU_STATE_CONFIGURED, +}; + +#ifdef CONFIG_HOTPLUG_CPU +static DEFINE_MUTEX(smp_cpu_state_mutex); +#endif +static int smp_cpu_state[NR_CPUS]; + +static DEFINE_PER_CPU(struct cpu, cpu_devices); +DEFINE_PER_CPU(struct s390_idle_data, s390_idle); + static void smp_ext_bitcall(int, ec_bit_sig); /* @@ -355,6 +372,13 @@ void smp_ctl_clear_bit(int cr, int bit) } EXPORT_SYMBOL(smp_ctl_clear_bit); +/* + * In early ipl state a temp. logically cpu number is needed, so the sigp + * functions can be used to sense other cpus. Since NR_CPUS is >= 2 on + * CONFIG_SMP and the ipl cpu is logical cpu 0, it must be 1. + */ +#define CPU_INIT_NO 1 + #if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_ZFCPDUMP_MODULE) /* @@ -376,8 +400,9 @@ static void __init smp_get_save_area(unsigned int cpu, unsigned int phy_cpu) return; } zfcpdump_save_areas[cpu] = alloc_bootmem(sizeof(union save_area)); - __cpu_logical_map[1] = (__u16) phy_cpu; - while (signal_processor(1, sigp_stop_and_store_status) == sigp_busy) + __cpu_logical_map[CPU_INIT_NO] = (__u16) phy_cpu; + while (signal_processor(CPU_INIT_NO, sigp_stop_and_store_status) == + sigp_busy) cpu_relax(); memcpy(zfcpdump_save_areas[cpu], (void *)(unsigned long) store_prefix() + SAVE_AREA_BASE, @@ -397,32 +422,166 @@ static inline void smp_get_save_area(unsigned int cpu, unsigned int phy_cpu) { } #endif /* CONFIG_ZFCPDUMP || CONFIG_ZFCPDUMP_MODULE */ +static int cpu_stopped(int cpu) +{ + __u32 status; + + /* Check for stopped state */ + if (signal_processor_ps(&status, 0, cpu, sigp_sense) == + sigp_status_stored) { + if (status & 0x40) + return 1; + } + return 0; +} + /* * Lets check how many CPUs we have. */ -static unsigned int __init smp_count_cpus(void) +static void __init smp_count_cpus(unsigned int *configured_cpus, + unsigned int *standby_cpus) { - unsigned int cpu, num_cpus; - __u16 boot_cpu_addr; + unsigned int cpu; + struct sclp_cpu_info *info; + u16 boot_cpu_addr, cpu_addr; - /* - * cpu 0 is the boot cpu. See smp_prepare_boot_cpu. - */ boot_cpu_addr = S390_lowcore.cpu_data.cpu_addr; current_thread_info()->cpu = 0; - num_cpus = 1; - for (cpu = 0; cpu <= 65535; cpu++) { - if ((__u16) cpu == boot_cpu_addr) + *configured_cpus = 1; + *standby_cpus = 0; + + info = alloc_bootmem_pages(sizeof(*info)); + if (!info) + disabled_wait((unsigned long) __builtin_return_address(0)); + + /* Use sigp detection algorithm if sclp doesn't work. */ + if (sclp_get_cpu_info(info)) { + smp_use_sigp_detection = 1; + for (cpu = 0; cpu <= 65535; cpu++) { + if (cpu == boot_cpu_addr) + continue; + __cpu_logical_map[CPU_INIT_NO] = cpu; + if (cpu_stopped(CPU_INIT_NO)) + (*configured_cpus)++; + } + goto out; + } + + if (info->has_cpu_type) { + for (cpu = 0; cpu < info->combined; cpu++) { + if (info->cpu[cpu].address == boot_cpu_addr) { + smp_cpu_type = info->cpu[cpu].type; + break; + } + } + } + /* Count cpus. */ + for (cpu = 0; cpu < info->combined; cpu++) { + if (info->has_cpu_type && info->cpu[cpu].type != smp_cpu_type) + continue; + cpu_addr = info->cpu[cpu].address; + if (cpu_addr == boot_cpu_addr) continue; - __cpu_logical_map[1] = (__u16) cpu; - if (signal_processor(1, sigp_sense) == sigp_not_operational) + __cpu_logical_map[CPU_INIT_NO] = cpu_addr; + if (!cpu_stopped(CPU_INIT_NO)) { + (*standby_cpus)++; continue; - smp_get_save_area(num_cpus, cpu); - num_cpus++; + } + smp_get_save_area(*configured_cpus, cpu_addr); + (*configured_cpus)++; } - printk("Detected %d CPU's\n", (int) num_cpus); - printk("Boot cpu address %2X\n", boot_cpu_addr); - return num_cpus; +out: + printk(KERN_INFO "CPUs: %d configured, %d standby\n", + *configured_cpus, *standby_cpus); + free_bootmem((unsigned long) info, sizeof(*info)); +} + +static int cpu_known(int cpu_id) +{ + int cpu; + + for_each_present_cpu(cpu) { + if (__cpu_logical_map[cpu] == cpu_id) + return 1; + } + return 0; +} + +static int smp_rescan_cpus_sigp(cpumask_t avail) +{ + int cpu_id, logical_cpu; + + logical_cpu = first_cpu(avail); + if (logical_cpu == NR_CPUS) + return 0; + for (cpu_id = 0; cpu_id <= 65535; cpu_id++) { + if (cpu_known(cpu_id)) + continue; + __cpu_logical_map[logical_cpu] = cpu_id; + if (!cpu_stopped(logical_cpu)) + continue; + cpu_set(logical_cpu, cpu_present_map); + smp_cpu_state[logical_cpu] = CPU_STATE_CONFIGURED; + logical_cpu = next_cpu(logical_cpu, avail); + if (logical_cpu == NR_CPUS) + break; + } + return 0; +} + +static int __init_refok smp_rescan_cpus_sclp(cpumask_t avail) +{ + struct sclp_cpu_info *info; + int cpu_id, logical_cpu, cpu; + int rc; + + logical_cpu = first_cpu(avail); + if (logical_cpu == NR_CPUS) + return 0; + if (slab_is_available()) + info = kmalloc(sizeof(*info), GFP_KERNEL); + else + info = alloc_bootmem(sizeof(*info)); + if (!info) + return -ENOMEM; + rc = sclp_get_cpu_info(info); + if (rc) + goto out; + for (cpu = 0; cpu < info->combined; cpu++) { + if (info->has_cpu_type && info->cpu[cpu].type != smp_cpu_type) + continue; + cpu_id = info->cpu[cpu].address; + if (cpu_known(cpu_id)) + continue; + __cpu_logical_map[logical_cpu] = cpu_id; + cpu_set(logical_cpu, cpu_present_map); + if (cpu >= info->configured) + smp_cpu_state[logical_cpu] = CPU_STATE_STANDBY; + else + smp_cpu_state[logical_cpu] = CPU_STATE_CONFIGURED; + logical_cpu = next_cpu(logical_cpu, avail); + if (logical_cpu == NR_CPUS) + break; + } +out: + if (slab_is_available()) + kfree(info); + else + free_bootmem((unsigned long) info, sizeof(*info)); + return rc; +} + +static int smp_rescan_cpus(void) +{ + cpumask_t avail; + + cpus_setall(avail); + cpus_and(avail, avail, cpu_possible_map); + cpus_andnot(avail, avail, cpu_present_map); + if (smp_use_sigp_detection) + return smp_rescan_cpus_sigp(avail); + else + return smp_rescan_cpus_sclp(avail); } /* @@ -453,8 +612,6 @@ int __cpuinit start_secondary(void *cpuvoid) return 0; } -DEFINE_PER_CPU(struct s390_idle_data, s390_idle); - static void __init smp_create_idle(unsigned int cpu) { struct task_struct *p; @@ -470,37 +627,16 @@ static void __init smp_create_idle(unsigned int cpu) spin_lock_init(&(&per_cpu(s390_idle, cpu))->lock); } -static int cpu_stopped(int cpu) -{ - __u32 status; - - /* Check for stopped state */ - if (signal_processor_ps(&status, 0, cpu, sigp_sense) == - sigp_status_stored) { - if (status & 0x40) - return 1; - } - return 0; -} - /* Upping and downing of CPUs */ - int __cpu_up(unsigned int cpu) { struct task_struct *idle; struct _lowcore *cpu_lowcore; struct stack_frame *sf; sigp_ccode ccode; - int curr_cpu; - - for (curr_cpu = 0; curr_cpu <= 65535; curr_cpu++) { - __cpu_logical_map[cpu] = (__u16) curr_cpu; - if (cpu_stopped(cpu)) - break; - } - if (!cpu_stopped(cpu)) - return -ENODEV; + if (smp_cpu_state[cpu] != CPU_STATE_CONFIGURED) + return -EIO; ccode = signal_processor_p((__u32)(unsigned long)(lowcore_ptr[cpu]), cpu, sigp_set_prefix); @@ -543,21 +679,18 @@ static unsigned int __initdata possible_cpus; void __init smp_setup_cpu_possible_map(void) { - unsigned int phy_cpus, pos_cpus, cpu; - - phy_cpus = smp_count_cpus(); - pos_cpus = min(phy_cpus + additional_cpus, (unsigned int) NR_CPUS); + unsigned int pos_cpus, cpu; + unsigned int configured_cpus, standby_cpus; + smp_count_cpus(&configured_cpus, &standby_cpus); + pos_cpus = min(configured_cpus + standby_cpus + additional_cpus, + (unsigned int) NR_CPUS); if (possible_cpus) pos_cpus = min(possible_cpus, (unsigned int) NR_CPUS); - for (cpu = 0; cpu < pos_cpus; cpu++) cpu_set(cpu, cpu_possible_map); - - phy_cpus = min(phy_cpus, pos_cpus); - - for (cpu = 0; cpu < phy_cpus; cpu++) - cpu_set(cpu, cpu_present_map); + cpu_present_map = cpumask_of_cpu(0); + smp_rescan_cpus(); } #ifdef CONFIG_HOTPLUG_CPU @@ -612,7 +745,7 @@ void __cpu_die(unsigned int cpu) /* Wait until target cpu is down */ while (!smp_cpu_not_running(cpu)) cpu_relax(); - printk("Processor %d spun down\n", cpu); + printk(KERN_INFO "Processor %d spun down\n", cpu); } void cpu_die(void) @@ -686,12 +819,12 @@ void __init smp_prepare_boot_cpu(void) cpu_set(0, cpu_online_map); S390_lowcore.percpu_offset = __per_cpu_offset[0]; current_set[0] = current; + smp_cpu_state[0] = CPU_STATE_CONFIGURED; spin_lock_init(&(&__get_cpu_var(s390_idle))->lock); } void __init smp_cpus_done(unsigned int max_cpus) { - cpu_present_map = cpu_possible_map; } /* @@ -705,7 +838,79 @@ int setup_profiling_timer(unsigned int multiplier) return 0; } -static DEFINE_PER_CPU(struct cpu, cpu_devices); +#ifdef CONFIG_HOTPLUG_CPU +static ssize_t cpu_configure_show(struct sys_device *dev, char *buf) +{ + ssize_t count; + + mutex_lock(&smp_cpu_state_mutex); + count = sprintf(buf, "%d\n", smp_cpu_state[dev->id]); + mutex_unlock(&smp_cpu_state_mutex); + return count; +} + +static ssize_t cpu_configure_store(struct sys_device *dev, const char *buf, + size_t count) +{ + int cpu = dev->id; + int val, rc; + char delim; + + if (sscanf(buf, "%d %c", &val, &delim) != 1) + return -EINVAL; + if (val != 0 && val != 1) + return -EINVAL; + + mutex_lock(&smp_cpu_state_mutex); + lock_cpu_hotplug(); + rc = -EBUSY; + if (cpu_online(cpu)) + goto out; + rc = 0; + switch (val) { + case 0: + if (smp_cpu_state[cpu] == CPU_STATE_CONFIGURED) { + rc = sclp_cpu_deconfigure(__cpu_logical_map[cpu]); + if (!rc) + smp_cpu_state[cpu] = CPU_STATE_STANDBY; + } + break; + case 1: + if (smp_cpu_state[cpu] == CPU_STATE_STANDBY) { + rc = sclp_cpu_configure(__cpu_logical_map[cpu]); + if (!rc) + smp_cpu_state[cpu] = CPU_STATE_CONFIGURED; + } + break; + default: + break; + } +out: + unlock_cpu_hotplug(); + mutex_unlock(&smp_cpu_state_mutex); + return rc ? rc : count; +} +static SYSDEV_ATTR(configure, 0644, cpu_configure_show, cpu_configure_store); +#endif /* CONFIG_HOTPLUG_CPU */ + +static ssize_t show_cpu_address(struct sys_device *dev, char *buf) +{ + return sprintf(buf, "%d\n", __cpu_logical_map[dev->id]); +} +static SYSDEV_ATTR(address, 0444, show_cpu_address, NULL); + + +static struct attribute *cpu_common_attrs[] = { +#ifdef CONFIG_HOTPLUG_CPU + &attr_configure.attr, +#endif + &attr_address.attr, + NULL, +}; + +static struct attribute_group cpu_common_attr_group = { + .attrs = cpu_common_attrs, +}; static ssize_t show_capability(struct sys_device *dev, char *buf) { @@ -750,15 +955,15 @@ static ssize_t show_idle_time(struct sys_device *dev, char *buf) } static SYSDEV_ATTR(idle_time_us, 0444, show_idle_time, NULL); -static struct attribute *cpu_attrs[] = { +static struct attribute *cpu_online_attrs[] = { &attr_capability.attr, &attr_idle_count.attr, &attr_idle_time_us.attr, NULL, }; -static struct attribute_group cpu_attr_group = { - .attrs = cpu_attrs, +static struct attribute_group cpu_online_attr_group = { + .attrs = cpu_online_attrs, }; static int __cpuinit smp_cpu_notify(struct notifier_block *self, @@ -778,12 +983,12 @@ static int __cpuinit smp_cpu_notify(struct notifier_block *self, idle->idle_time = 0; idle->idle_count = 0; spin_unlock_irq(&idle->lock); - if (sysfs_create_group(&s->kobj, &cpu_attr_group)) + if (sysfs_create_group(&s->kobj, &cpu_online_attr_group)) return NOTIFY_BAD; break; case CPU_DEAD: case CPU_DEAD_FROZEN: - sysfs_remove_group(&s->kobj, &cpu_attr_group); + sysfs_remove_group(&s->kobj, &cpu_online_attr_group); break; } return NOTIFY_OK; @@ -793,6 +998,62 @@ static struct notifier_block __cpuinitdata smp_cpu_nb = { .notifier_call = smp_cpu_notify, }; +static int smp_add_present_cpu(int cpu) +{ + struct cpu *c = &per_cpu(cpu_devices, cpu); + struct sys_device *s = &c->sysdev; + int rc; + + c->hotpluggable = 1; + rc = register_cpu(c, cpu); + if (rc) + goto out; + rc = sysfs_create_group(&s->kobj, &cpu_common_attr_group); + if (rc) + goto out_cpu; + if (!cpu_online(cpu)) + goto out; + rc = sysfs_create_group(&s->kobj, &cpu_online_attr_group); + if (!rc) + return 0; + sysfs_remove_group(&s->kobj, &cpu_common_attr_group); +out_cpu: +#ifdef CONFIG_HOTPLUG_CPU + unregister_cpu(c); +#endif +out: + return rc; +} + +#ifdef CONFIG_HOTPLUG_CPU +static ssize_t rescan_store(struct sys_device *dev, const char *buf, + size_t count) +{ + cpumask_t newcpus; + int cpu; + int rc; + + mutex_lock(&smp_cpu_state_mutex); + lock_cpu_hotplug(); + newcpus = cpu_present_map; + rc = smp_rescan_cpus(); + if (rc) + goto out; + cpus_andnot(newcpus, cpu_present_map, newcpus); + for_each_cpu_mask(cpu, newcpus) { + rc = smp_add_present_cpu(cpu); + if (rc) + cpu_clear(cpu, cpu_present_map); + } + rc = 0; +out: + unlock_cpu_hotplug(); + mutex_unlock(&smp_cpu_state_mutex); + return rc ? rc : count; +} +static SYSDEV_ATTR(rescan, 0200, NULL, rescan_store); +#endif /* CONFIG_HOTPLUG_CPU */ + static int __init topology_init(void) { int cpu; @@ -800,16 +1061,14 @@ static int __init topology_init(void) register_cpu_notifier(&smp_cpu_nb); - for_each_possible_cpu(cpu) { - struct cpu *c = &per_cpu(cpu_devices, cpu); - struct sys_device *s = &c->sysdev; - - c->hotpluggable = 1; - register_cpu(c, cpu); - if (!cpu_online(cpu)) - continue; - s = &c->sysdev; - rc = sysfs_create_group(&s->kobj, &cpu_attr_group); +#ifdef CONFIG_HOTPLUG_CPU + rc = sysfs_create_file(&cpu_sysdev_class.kset.kobj, + &attr_rescan.attr); + if (rc) + return rc; +#endif + for_each_present_cpu(cpu) { + rc = smp_add_present_cpu(cpu); if (rc) return rc; } diff --git a/drivers/s390/char/Makefile b/drivers/s390/char/Makefile index bee3a3af691d..9317333ec149 100644 --- a/drivers/s390/char/Makefile +++ b/drivers/s390/char/Makefile @@ -3,7 +3,7 @@ # obj-y += ctrlchar.o keyboard.o defkeymap.o sclp.o sclp_rw.o sclp_quiesce.o \ - sclp_info.o sclp_config.o sclp_chp.o sclp_cpi_sys.o + sclp_cmd.o sclp_config.o sclp_chp.o sclp_cpi_sys.o obj-$(CONFIG_TN3270) += raw3270.o obj-$(CONFIG_TN3270_CONSOLE) += con3270.o diff --git a/drivers/s390/char/sclp.h b/drivers/s390/char/sclp.h index c7318a125852..aa8186d18aee 100644 --- a/drivers/s390/char/sclp.h +++ b/drivers/s390/char/sclp.h @@ -56,8 +56,6 @@ typedef unsigned int sclp_cmdw_t; #define SCLP_CMDW_READ_EVENT_DATA 0x00770005 #define SCLP_CMDW_WRITE_EVENT_DATA 0x00760005 #define SCLP_CMDW_WRITE_EVENT_MASK 0x00780005 -#define SCLP_CMDW_READ_SCP_INFO 0x00020001 -#define SCLP_CMDW_READ_SCP_INFO_FORCED 0x00120001 #define GDS_ID_MDSMU 0x1310 #define GDS_ID_MDSROUTEINFO 0x1311 @@ -83,6 +81,8 @@ extern u64 sclp_facilities; #define SCLP_HAS_CHP_INFO (sclp_facilities & 0x8000000000000000ULL) #define SCLP_HAS_CHP_RECONFIG (sclp_facilities & 0x2000000000000000ULL) +#define SCLP_HAS_CPU_INFO (sclp_facilities & 0x0800000000000000ULL) +#define SCLP_HAS_CPU_RECONFIG (sclp_facilities & 0x0400000000000000ULL) struct gds_subvector { u8 length; diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c new file mode 100644 index 000000000000..ba004fd43c05 --- /dev/null +++ b/drivers/s390/char/sclp_cmd.c @@ -0,0 +1,319 @@ +/* + * drivers/s390/char/sclp_cmd.c + * + * Copyright IBM Corp. 2007 + * Author(s): Heiko Carstens + */ + +#include +#include +#include +#include +#include +#include +#include "sclp.h" + +#define TAG "sclp_cmd: " + +#define SCLP_CMDW_READ_SCP_INFO 0x00020001 +#define SCLP_CMDW_READ_SCP_INFO_FORCED 0x00120001 + +struct read_info_sccb { + struct sccb_header header; /* 0-7 */ + u16 rnmax; /* 8-9 */ + u8 rnsize; /* 10 */ + u8 _reserved0[24 - 11]; /* 11-15 */ + u8 loadparm[8]; /* 24-31 */ + u8 _reserved1[48 - 32]; /* 32-47 */ + u64 facilities; /* 48-55 */ + u8 _reserved2[84 - 56]; /* 56-83 */ + u8 fac84; /* 84 */ + u8 _reserved3[91 - 85]; /* 85-90 */ + u8 flags; /* 91 */ + u8 _reserved4[100 - 92]; /* 92-99 */ + u32 rnsize2; /* 100-103 */ + u64 rnmax2; /* 104-111 */ + u8 _reserved5[4096 - 112]; /* 112-4095 */ +} __attribute__((packed, aligned(PAGE_SIZE))); + +static struct read_info_sccb __initdata early_read_info_sccb; +static int __initdata early_read_info_sccb_valid; + +u64 sclp_facilities; +static u8 sclp_fac84; + +static int __init sclp_cmd_sync_early(sclp_cmdw_t cmd, void *sccb) +{ + int rc; + + __ctl_set_bit(0, 9); + rc = sclp_service_call(cmd, sccb); + if (rc) + goto out; + __load_psw_mask(PSW_BASE_BITS | PSW_MASK_EXT | + PSW_MASK_WAIT | PSW_DEFAULT_KEY); + local_irq_disable(); +out: + /* Contents of the sccb might have changed. */ + barrier(); + __ctl_clear_bit(0, 9); + return rc; +} + +void __init sclp_read_info_early(void) +{ + int rc; + int i; + struct read_info_sccb *sccb; + sclp_cmdw_t commands[] = {SCLP_CMDW_READ_SCP_INFO_FORCED, + SCLP_CMDW_READ_SCP_INFO}; + + sccb = &early_read_info_sccb; + for (i = 0; i < ARRAY_SIZE(commands); i++) { + do { + memset(sccb, 0, sizeof(*sccb)); + sccb->header.length = sizeof(*sccb); + sccb->header.control_mask[2] = 0x80; + rc = sclp_cmd_sync_early(commands[i], sccb); + } while (rc == -EBUSY); + + if (rc) + break; + if (sccb->header.response_code == 0x10) { + early_read_info_sccb_valid = 1; + break; + } + if (sccb->header.response_code != 0x1f0) + break; + } +} + +void __init sclp_facilities_detect(void) +{ + if (!early_read_info_sccb_valid) + return; + sclp_facilities = early_read_info_sccb.facilities; + sclp_fac84 = early_read_info_sccb.fac84; +} + +unsigned long long __init sclp_memory_detect(void) +{ + unsigned long long memsize; + struct read_info_sccb *sccb; + + if (!early_read_info_sccb_valid) + return 0; + sccb = &early_read_info_sccb; + if (sccb->rnsize) + memsize = sccb->rnsize << 20; + else + memsize = sccb->rnsize2 << 20; + if (sccb->rnmax) + memsize *= sccb->rnmax; + else + memsize *= sccb->rnmax2; + return memsize; +} + +/* + * This function will be called after sclp_memory_detect(), which gets called + * early from early.c code. Therefore the sccb should have valid contents. + */ +void __init sclp_get_ipl_info(struct sclp_ipl_info *info) +{ + struct read_info_sccb *sccb; + + if (!early_read_info_sccb_valid) + return; + sccb = &early_read_info_sccb; + info->is_valid = 1; + if (sccb->flags & 0x2) + info->has_dump = 1; + memcpy(&info->loadparm, &sccb->loadparm, LOADPARM_LEN); +} + +static void sclp_sync_callback(struct sclp_req *req, void *data) +{ + struct completion *completion = data; + + complete(completion); +} + +static int do_sync_request(sclp_cmdw_t cmd, void *sccb) +{ + struct completion completion; + struct sclp_req *request; + int rc; + + request = kzalloc(sizeof(*request), GFP_KERNEL); + if (!request) + return -ENOMEM; + request->command = cmd; + request->sccb = sccb; + request->status = SCLP_REQ_FILLED; + request->callback = sclp_sync_callback; + request->callback_data = &completion; + init_completion(&completion); + + /* Perform sclp request. */ + rc = sclp_add_request(request); + if (rc) + goto out; + wait_for_completion(&completion); + + /* Check response. */ + if (request->status != SCLP_REQ_DONE) { + printk(KERN_WARNING TAG "sync request failed " + "(cmd=0x%08x, status=0x%02x)\n", cmd, request->status); + rc = -EIO; + } +out: + kfree(request); + return rc; +} + +/* + * CPU configuration related functions. + */ + +#define SCLP_CMDW_READ_CPU_INFO 0x00010001 +#define SCLP_CMDW_CONFIGURE_CPU 0x00110001 +#define SCLP_CMDW_DECONFIGURE_CPU 0x00100001 + +struct read_cpu_info_sccb { + struct sccb_header header; + u16 nr_configured; + u16 offset_configured; + u16 nr_standby; + u16 offset_standby; + u8 reserved[4096 - 16]; +} __attribute__((packed, aligned(PAGE_SIZE))); + +static struct read_cpu_info_sccb __initdata early_read_cpu_info_sccb; +static struct sclp_cpu_info __initdata sclp_cpu_info; + +static void sclp_fill_cpu_info(struct sclp_cpu_info *info, + struct read_cpu_info_sccb *sccb) +{ + char *page = (char *) sccb; + + memset(info, 0, sizeof(*info)); + info->configured = sccb->nr_configured; + info->standby = sccb->nr_standby; + info->combined = sccb->nr_configured + sccb->nr_standby; + info->has_cpu_type = sclp_fac84 & 0x1; + memcpy(&info->cpu, page + sccb->offset_configured, + info->combined * sizeof(struct sclp_cpu_entry)); +} + +void __init sclp_read_cpu_info_early(void) +{ + int rc; + struct read_cpu_info_sccb *sccb; + + if (!SCLP_HAS_CPU_INFO) + return; + + sccb = &early_read_cpu_info_sccb; + do { + memset(sccb, 0, sizeof(*sccb)); + sccb->header.length = sizeof(*sccb); + rc = sclp_cmd_sync_early(SCLP_CMDW_READ_CPU_INFO, sccb); + } while (rc == -EBUSY); + + if (rc) + return; + if (sccb->header.response_code != 0x10) + return; + sclp_fill_cpu_info(&sclp_cpu_info, sccb); +} + +static int __init sclp_get_cpu_info_early(struct sclp_cpu_info *info) +{ + if (!SCLP_HAS_CPU_INFO) + return -EOPNOTSUPP; + *info = sclp_cpu_info; + return 0; +} + +static int sclp_get_cpu_info_late(struct sclp_cpu_info *info) +{ + int rc; + struct read_cpu_info_sccb *sccb; + + if (!SCLP_HAS_CPU_INFO) + return -EOPNOTSUPP; + sccb = (struct read_cpu_info_sccb *) __get_free_page(GFP_KERNEL + | GFP_DMA); + if (!sccb) + return -ENOMEM; + memset(sccb, 0, sizeof(*sccb)); + sccb->header.length = sizeof(*sccb); + rc = do_sync_request(SCLP_CMDW_READ_CPU_INFO, sccb); + if (rc) + goto out; + if (sccb->header.response_code != 0x0010) { + printk(KERN_WARNING TAG "readcpuinfo failed " + "(response=0x%04x)\n", sccb->header.response_code); + rc = -EIO; + goto out; + } + sclp_fill_cpu_info(info, sccb); +out: + free_page((unsigned long) sccb); + return rc; +} + +int __init_refok sclp_get_cpu_info(struct sclp_cpu_info *info) +{ + if (slab_is_available()) + return sclp_get_cpu_info_late(info); + return sclp_get_cpu_info_early(info); +} + +struct cpu_configure_sccb { + struct sccb_header header; +} __attribute__((packed, aligned(8))); + +static int do_cpu_configure(sclp_cmdw_t cmd) +{ + struct cpu_configure_sccb *sccb; + int rc; + + if (!SCLP_HAS_CPU_RECONFIG) + return -EOPNOTSUPP; + /* + * This is not going to cross a page boundary since we force + * kmalloc to have a minimum alignment of 8 bytes on s390. + */ + sccb = kzalloc(sizeof(*sccb), GFP_KERNEL | GFP_DMA); + if (!sccb) + return -ENOMEM; + sccb->header.length = sizeof(*sccb); + rc = do_sync_request(cmd, sccb); + if (rc) + goto out; + switch (sccb->header.response_code) { + case 0x0020: + case 0x0120: + break; + default: + printk(KERN_WARNING TAG "configure cpu failed (cmd=0x%08x, " + "response=0x%04x)\n", cmd, sccb->header.response_code); + rc = -EIO; + break; + } +out: + kfree(sccb); + return rc; +} + +int sclp_cpu_configure(u8 cpu) +{ + return do_cpu_configure(SCLP_CMDW_CONFIGURE_CPU | cpu << 8); +} + +int sclp_cpu_deconfigure(u8 cpu) +{ + return do_cpu_configure(SCLP_CMDW_DECONFIGURE_CPU | cpu << 8); +} diff --git a/drivers/s390/char/sclp_info.c b/drivers/s390/char/sclp_info.c deleted file mode 100644 index a1136e052750..000000000000 --- a/drivers/s390/char/sclp_info.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * drivers/s390/char/sclp_info.c - * - * Copyright IBM Corp. 2007 - * Author(s): Heiko Carstens - */ - -#include -#include -#include -#include -#include "sclp.h" - -struct sclp_readinfo_sccb { - struct sccb_header header; /* 0-7 */ - u16 rnmax; /* 8-9 */ - u8 rnsize; /* 10 */ - u8 _reserved0[24 - 11]; /* 11-23 */ - u8 loadparm[8]; /* 24-31 */ - u8 _reserved1[48 - 32]; /* 32-47 */ - u64 facilities; /* 48-55 */ - u8 _reserved2[91 - 56]; /* 56-90 */ - u8 flags; /* 91 */ - u8 _reserved3[100 - 92]; /* 92-99 */ - u32 rnsize2; /* 100-103 */ - u64 rnmax2; /* 104-111 */ - u8 _reserved4[4096 - 112]; /* 112-4095 */ -} __attribute__((packed, aligned(4096))); - -static struct sclp_readinfo_sccb __initdata early_readinfo_sccb; -static int __initdata early_readinfo_sccb_valid; - -u64 sclp_facilities; - -void __init sclp_readinfo_early(void) -{ - int ret; - int i; - struct sclp_readinfo_sccb *sccb; - sclp_cmdw_t commands[] = {SCLP_CMDW_READ_SCP_INFO_FORCED, - SCLP_CMDW_READ_SCP_INFO}; - - /* Enable service signal subclass mask. */ - __ctl_set_bit(0, 9); - sccb = &early_readinfo_sccb; - for (i = 0; i < ARRAY_SIZE(commands); i++) { - do { - memset(sccb, 0, sizeof(*sccb)); - sccb->header.length = sizeof(*sccb); - sccb->header.control_mask[2] = 0x80; - ret = sclp_service_call(commands[i], sccb); - } while (ret == -EBUSY); - - if (ret) - break; - __load_psw_mask(PSW_BASE_BITS | PSW_MASK_EXT | - PSW_MASK_WAIT | PSW_DEFAULT_KEY); - local_irq_disable(); - /* - * Contents of the sccb might have changed - * therefore a barrier is needed. - */ - barrier(); - if (sccb->header.response_code == 0x10) { - early_readinfo_sccb_valid = 1; - break; - } - if (sccb->header.response_code != 0x1f0) - break; - } - /* Disable service signal subclass mask again. */ - __ctl_clear_bit(0, 9); -} - -void __init sclp_facilities_detect(void) -{ - if (!early_readinfo_sccb_valid) - return; - sclp_facilities = early_readinfo_sccb.facilities; -} - -unsigned long long __init sclp_memory_detect(void) -{ - unsigned long long memsize; - struct sclp_readinfo_sccb *sccb; - - if (!early_readinfo_sccb_valid) - return 0; - sccb = &early_readinfo_sccb; - if (sccb->rnsize) - memsize = sccb->rnsize << 20; - else - memsize = sccb->rnsize2 << 20; - if (sccb->rnmax) - memsize *= sccb->rnmax; - else - memsize *= sccb->rnmax2; - return memsize; -} - -/* - * This function will be called after sclp_memory_detect(), which gets called - * early from early.c code. Therefore the sccb should have valid contents. - */ -void __init sclp_get_ipl_info(struct sclp_ipl_info *info) -{ - struct sclp_readinfo_sccb *sccb; - - if (!early_readinfo_sccb_valid) - return; - sccb = &early_readinfo_sccb; - info->is_valid = 1; - if (sccb->flags & 0x2) - info->has_dump = 1; - memcpy(&info->loadparm, &sccb->loadparm, LOADPARM_LEN); -} diff --git a/include/asm-s390/sclp.h b/include/asm-s390/sclp.h index cb9faf1ea5cf..b8c7695cd4c8 100644 --- a/include/asm-s390/sclp.h +++ b/include/asm-s390/sclp.h @@ -27,7 +27,26 @@ struct sclp_ipl_info { char loadparm[LOADPARM_LEN]; }; -void sclp_readinfo_early(void); +struct sclp_cpu_entry { + u8 address; + u8 reserved0[13]; + u8 type; + u8 reserved1; +} __attribute__((packed)); + +struct sclp_cpu_info { + unsigned int configured; + unsigned int standby; + unsigned int combined; + int has_cpu_type; + struct sclp_cpu_entry cpu[255]; +}; + +int sclp_get_cpu_info(struct sclp_cpu_info *info); +int sclp_cpu_configure(u8 cpu); +int sclp_cpu_deconfigure(u8 cpu); +void sclp_read_info_early(void); +void sclp_read_cpu_info_early(void); void sclp_facilities_detect(void); unsigned long long sclp_memory_detect(void); int sclp_sdias_blk_count(void); -- cgit v1.2.3-59-g8ed1b From 4b28a8fe78bd593cdc4454cf28af71ca9556914d Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Sat, 26 Jan 2008 14:10:57 +0100 Subject: [S390] sclp: convert channel path configure code to use sync interface. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/char/Makefile | 2 +- drivers/s390/char/sclp_chp.c | 200 ------------------------------------------- drivers/s390/char/sclp_cmd.c | 123 +++++++++++++++++++++++++- 3 files changed, 123 insertions(+), 202 deletions(-) delete mode 100644 drivers/s390/char/sclp_chp.c diff --git a/drivers/s390/char/Makefile b/drivers/s390/char/Makefile index 9317333ec149..7e73e39a1741 100644 --- a/drivers/s390/char/Makefile +++ b/drivers/s390/char/Makefile @@ -3,7 +3,7 @@ # obj-y += ctrlchar.o keyboard.o defkeymap.o sclp.o sclp_rw.o sclp_quiesce.o \ - sclp_cmd.o sclp_config.o sclp_chp.o sclp_cpi_sys.o + sclp_cmd.o sclp_config.o sclp_cpi_sys.o obj-$(CONFIG_TN3270) += raw3270.o obj-$(CONFIG_TN3270_CONSOLE) += con3270.o diff --git a/drivers/s390/char/sclp_chp.c b/drivers/s390/char/sclp_chp.c deleted file mode 100644 index c68f5e7e63a0..000000000000 --- a/drivers/s390/char/sclp_chp.c +++ /dev/null @@ -1,200 +0,0 @@ -/* - * drivers/s390/char/sclp_chp.c - * - * Copyright IBM Corp. 2007 - * Author(s): Peter Oberparleiter - */ - -#include -#include -#include -#include -#include -#include - -#include "sclp.h" - -#define TAG "sclp_chp: " - -#define SCLP_CMDW_CONFIGURE_CHANNEL_PATH 0x000f0001 -#define SCLP_CMDW_DECONFIGURE_CHANNEL_PATH 0x000e0001 -#define SCLP_CMDW_READ_CHANNEL_PATH_INFORMATION 0x00030001 - -static inline sclp_cmdw_t get_configure_cmdw(struct chp_id chpid) -{ - return SCLP_CMDW_CONFIGURE_CHANNEL_PATH | chpid.id << 8; -} - -static inline sclp_cmdw_t get_deconfigure_cmdw(struct chp_id chpid) -{ - return SCLP_CMDW_DECONFIGURE_CHANNEL_PATH | chpid.id << 8; -} - -static void chp_callback(struct sclp_req *req, void *data) -{ - struct completion *completion = data; - - complete(completion); -} - -struct chp_cfg_sccb { - struct sccb_header header; - u8 ccm; - u8 reserved[6]; - u8 cssid; -} __attribute__((packed)); - -struct chp_cfg_data { - struct chp_cfg_sccb sccb; - struct sclp_req req; - struct completion completion; -} __attribute__((packed)); - -static int do_configure(sclp_cmdw_t cmd) -{ - struct chp_cfg_data *data; - int rc; - - if (!SCLP_HAS_CHP_RECONFIG) - return -EOPNOTSUPP; - /* Prepare sccb. */ - data = (struct chp_cfg_data *) get_zeroed_page(GFP_KERNEL | GFP_DMA); - if (!data) - return -ENOMEM; - data->sccb.header.length = sizeof(struct chp_cfg_sccb); - data->req.command = cmd; - data->req.sccb = &(data->sccb); - data->req.status = SCLP_REQ_FILLED; - data->req.callback = chp_callback; - data->req.callback_data = &(data->completion); - init_completion(&data->completion); - - /* Perform sclp request. */ - rc = sclp_add_request(&(data->req)); - if (rc) - goto out; - wait_for_completion(&data->completion); - - /* Check response .*/ - if (data->req.status != SCLP_REQ_DONE) { - printk(KERN_WARNING TAG "configure channel-path request failed " - "(status=0x%02x)\n", data->req.status); - rc = -EIO; - goto out; - } - switch (data->sccb.header.response_code) { - case 0x0020: - case 0x0120: - case 0x0440: - case 0x0450: - break; - default: - printk(KERN_WARNING TAG "configure channel-path failed " - "(cmd=0x%08x, response=0x%04x)\n", cmd, - data->sccb.header.response_code); - rc = -EIO; - break; - } -out: - free_page((unsigned long) data); - - return rc; -} - -/** - * sclp_chp_configure - perform configure channel-path sclp command - * @chpid: channel-path ID - * - * Perform configure channel-path command sclp command for specified chpid. - * Return 0 after command successfully finished, non-zero otherwise. - */ -int sclp_chp_configure(struct chp_id chpid) -{ - return do_configure(get_configure_cmdw(chpid)); -} - -/** - * sclp_chp_deconfigure - perform deconfigure channel-path sclp command - * @chpid: channel-path ID - * - * Perform deconfigure channel-path command sclp command for specified chpid - * and wait for completion. On success return 0. Return non-zero otherwise. - */ -int sclp_chp_deconfigure(struct chp_id chpid) -{ - return do_configure(get_deconfigure_cmdw(chpid)); -} - -struct chp_info_sccb { - struct sccb_header header; - u8 recognized[SCLP_CHP_INFO_MASK_SIZE]; - u8 standby[SCLP_CHP_INFO_MASK_SIZE]; - u8 configured[SCLP_CHP_INFO_MASK_SIZE]; - u8 ccm; - u8 reserved[6]; - u8 cssid; -} __attribute__((packed)); - -struct chp_info_data { - struct chp_info_sccb sccb; - struct sclp_req req; - struct completion completion; -} __attribute__((packed)); - -/** - * sclp_chp_read_info - perform read channel-path information sclp command - * @info: resulting channel-path information data - * - * Perform read channel-path information sclp command and wait for completion. - * On success, store channel-path information in @info and return 0. Return - * non-zero otherwise. - */ -int sclp_chp_read_info(struct sclp_chp_info *info) -{ - struct chp_info_data *data; - int rc; - - if (!SCLP_HAS_CHP_INFO) - return -EOPNOTSUPP; - /* Prepare sccb. */ - data = (struct chp_info_data *) get_zeroed_page(GFP_KERNEL | GFP_DMA); - if (!data) - return -ENOMEM; - data->sccb.header.length = sizeof(struct chp_info_sccb); - data->req.command = SCLP_CMDW_READ_CHANNEL_PATH_INFORMATION; - data->req.sccb = &(data->sccb); - data->req.status = SCLP_REQ_FILLED; - data->req.callback = chp_callback; - data->req.callback_data = &(data->completion); - init_completion(&data->completion); - - /* Perform sclp request. */ - rc = sclp_add_request(&(data->req)); - if (rc) - goto out; - wait_for_completion(&data->completion); - - /* Check response .*/ - if (data->req.status != SCLP_REQ_DONE) { - printk(KERN_WARNING TAG "read channel-path info request failed " - "(status=0x%02x)\n", data->req.status); - rc = -EIO; - goto out; - } - if (data->sccb.header.response_code != 0x0010) { - printk(KERN_WARNING TAG "read channel-path info failed " - "(response=0x%04x)\n", data->sccb.header.response_code); - rc = -EIO; - goto out; - } - memcpy(info->recognized, data->sccb.recognized, - SCLP_CHP_INFO_MASK_SIZE); - memcpy(info->standby, data->sccb.standby, - SCLP_CHP_INFO_MASK_SIZE); - memcpy(info->configured, data->sccb.configured, - SCLP_CHP_INFO_MASK_SIZE); -out: - free_page((unsigned long) data); - - return rc; -} diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c index ba004fd43c05..d7e6f4d65b78 100644 --- a/drivers/s390/char/sclp_cmd.c +++ b/drivers/s390/char/sclp_cmd.c @@ -2,7 +2,8 @@ * drivers/s390/char/sclp_cmd.c * * Copyright IBM Corp. 2007 - * Author(s): Heiko Carstens + * Author(s): Heiko Carstens , + * Peter Oberparleiter */ #include @@ -10,6 +11,7 @@ #include #include #include +#include #include #include "sclp.h" @@ -317,3 +319,122 @@ int sclp_cpu_deconfigure(u8 cpu) { return do_cpu_configure(SCLP_CMDW_DECONFIGURE_CPU | cpu << 8); } + +/* + * Channel path configuration related functions. + */ + +#define SCLP_CMDW_CONFIGURE_CHPATH 0x000f0001 +#define SCLP_CMDW_DECONFIGURE_CHPATH 0x000e0001 +#define SCLP_CMDW_READ_CHPATH_INFORMATION 0x00030001 + +struct chp_cfg_sccb { + struct sccb_header header; + u8 ccm; + u8 reserved[6]; + u8 cssid; +} __attribute__((packed)); + +static int do_chp_configure(sclp_cmdw_t cmd) +{ + struct chp_cfg_sccb *sccb; + int rc; + + if (!SCLP_HAS_CHP_RECONFIG) + return -EOPNOTSUPP; + /* Prepare sccb. */ + sccb = (struct chp_cfg_sccb *) get_zeroed_page(GFP_KERNEL | GFP_DMA); + if (!sccb) + return -ENOMEM; + sccb->header.length = sizeof(*sccb); + rc = do_sync_request(cmd, sccb); + if (rc) + goto out; + switch (sccb->header.response_code) { + case 0x0020: + case 0x0120: + case 0x0440: + case 0x0450: + break; + default: + printk(KERN_WARNING TAG "configure channel-path failed " + "(cmd=0x%08x, response=0x%04x)\n", cmd, + sccb->header.response_code); + rc = -EIO; + break; + } +out: + free_page((unsigned long) sccb); + return rc; +} + +/** + * sclp_chp_configure - perform configure channel-path sclp command + * @chpid: channel-path ID + * + * Perform configure channel-path command sclp command for specified chpid. + * Return 0 after command successfully finished, non-zero otherwise. + */ +int sclp_chp_configure(struct chp_id chpid) +{ + return do_chp_configure(SCLP_CMDW_CONFIGURE_CHPATH | chpid.id << 8); +} + +/** + * sclp_chp_deconfigure - perform deconfigure channel-path sclp command + * @chpid: channel-path ID + * + * Perform deconfigure channel-path command sclp command for specified chpid + * and wait for completion. On success return 0. Return non-zero otherwise. + */ +int sclp_chp_deconfigure(struct chp_id chpid) +{ + return do_chp_configure(SCLP_CMDW_DECONFIGURE_CHPATH | chpid.id << 8); +} + +struct chp_info_sccb { + struct sccb_header header; + u8 recognized[SCLP_CHP_INFO_MASK_SIZE]; + u8 standby[SCLP_CHP_INFO_MASK_SIZE]; + u8 configured[SCLP_CHP_INFO_MASK_SIZE]; + u8 ccm; + u8 reserved[6]; + u8 cssid; +} __attribute__((packed)); + +/** + * sclp_chp_read_info - perform read channel-path information sclp command + * @info: resulting channel-path information data + * + * Perform read channel-path information sclp command and wait for completion. + * On success, store channel-path information in @info and return 0. Return + * non-zero otherwise. + */ +int sclp_chp_read_info(struct sclp_chp_info *info) +{ + struct chp_info_sccb *sccb; + int rc; + + if (!SCLP_HAS_CHP_INFO) + return -EOPNOTSUPP; + /* Prepare sccb. */ + sccb = (struct chp_info_sccb *) get_zeroed_page(GFP_KERNEL | GFP_DMA); + if (!sccb) + return -ENOMEM; + sccb->header.length = sizeof(*sccb); + rc = do_sync_request(SCLP_CMDW_READ_CHPATH_INFORMATION, sccb); + if (rc) + goto out; + if (sccb->header.response_code != 0x0010) { + printk(KERN_WARNING TAG "read channel-path info failed " + "(response=0x%04x)\n", sccb->header.response_code); + rc = -EIO; + goto out; + } + memcpy(info->recognized, sccb->recognized, SCLP_CHP_INFO_MASK_SIZE); + memcpy(info->standby, sccb->standby, SCLP_CHP_INFO_MASK_SIZE); + memcpy(info->configured, sccb->configured, SCLP_CHP_INFO_MASK_SIZE); +out: + free_page((unsigned long) sccb); + return rc; +} -- cgit v1.2.3-59-g8ed1b From 6f457e1a149eb39ee58d51913e8023fc27c52806 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Sat, 26 Jan 2008 14:10:58 +0100 Subject: [S390] Fix tlb flushing with idte. The clear-by-asce operation of the idte instruction gets an asce (address-space-control-element) as argument to specify which TLBs need to get flushed. The current code passes a plain pointer to the start of the pgd without the additional bits which would make the pointer an asce. The current machines don't mind the difference but a future model might want to use the designation type control bits in the asce as a filter for the TLBs to flush. Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/head64.S | 2 +- include/asm-s390/mmu_context.h | 27 ++++++++++++--------------- include/asm-s390/tlbflush.h | 12 ++++++------ 3 files changed, 19 insertions(+), 22 deletions(-) diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S index a87b1976d409..79dccd206a6e 100644 --- a/arch/s390/kernel/head64.S +++ b/arch/s390/kernel/head64.S @@ -157,7 +157,7 @@ startup_continue: .long 0xb2b10000 # store facility list tm 0xc8,0x08 # check bit for clearing-by-ASCE bno 0f-.LPG1(%r13) - lhi %r1,2094 + lhi %r1,2048 lhi %r2,0 .long 0xb98e2001 oi 7(%r12),0x80 # set IDTE flag diff --git a/include/asm-s390/mmu_context.h b/include/asm-s390/mmu_context.h index 05b842126b99..a77d4ba3c8eb 100644 --- a/include/asm-s390/mmu_context.h +++ b/include/asm-s390/mmu_context.h @@ -12,10 +12,15 @@ #include #include -/* - * get a new mmu context.. S390 don't know about contexts. - */ -#define init_new_context(tsk,mm) 0 +static inline int init_new_context(struct task_struct *tsk, + struct mm_struct *mm) +{ + mm->context = _ASCE_TABLE_LENGTH | _ASCE_USER_BITS; +#ifdef CONFIG_64BIT + mm->context |= _ASCE_TYPE_REGION3; +#endif + return 0; +} #define destroy_context(mm) do { } while (0) @@ -27,19 +32,11 @@ static inline void update_mm(struct mm_struct *mm, struct task_struct *tsk) { - pgd_t *pgd = mm->pgd; - unsigned long asce_bits; - - /* Calculate asce bits from the first pgd table entry. */ - asce_bits = _ASCE_TABLE_LENGTH | _ASCE_USER_BITS; -#ifdef CONFIG_64BIT - asce_bits |= _ASCE_TYPE_REGION3; -#endif - S390_lowcore.user_asce = asce_bits | __pa(pgd); + S390_lowcore.user_asce = mm->context | __pa(mm->pgd); if (switch_amode) { /* Load primary space page table origin. */ - pgd_t *shadow_pgd = get_shadow_table(pgd) ? : pgd; - S390_lowcore.user_exec_asce = asce_bits | __pa(shadow_pgd); + pgd_t *shadow_pgd = get_shadow_table(mm->pgd) ? : mm->pgd; + S390_lowcore.user_exec_asce = mm->context | __pa(shadow_pgd); asm volatile(LCTL_OPCODE" 1,1,%0\n" : : "m" (S390_lowcore.user_exec_asce) ); } else diff --git a/include/asm-s390/tlbflush.h b/include/asm-s390/tlbflush.h index a69bd2490d52..a5e876539ec6 100644 --- a/include/asm-s390/tlbflush.h +++ b/include/asm-s390/tlbflush.h @@ -42,11 +42,11 @@ static inline void __tlb_flush_global(void) /* * Flush all tlb entries of a page table on all cpus. */ -static inline void __tlb_flush_idte(pgd_t *pgd) +static inline void __tlb_flush_idte(unsigned long asce) { asm volatile( " .insn rrf,0xb98e0000,0,%0,%1,0" - : : "a" (2048), "a" (__pa(pgd) & PAGE_MASK) : "cc" ); + : : "a" (2048), "a" (asce) : "cc" ); } static inline void __tlb_flush_mm(struct mm_struct * mm) @@ -61,11 +61,11 @@ static inline void __tlb_flush_mm(struct mm_struct * mm) * only ran on the local cpu. */ if (MACHINE_HAS_IDTE) { - pgd_t *shadow_pgd = get_shadow_table(mm->pgd); + pgd_t *shadow = get_shadow_table(mm->pgd); - if (shadow_pgd) - __tlb_flush_idte(shadow_pgd); - __tlb_flush_idte(mm->pgd); + if (shadow) + __tlb_flush_idte((unsigned long) shadow | mm->context); + __tlb_flush_idte((unsigned long) mm->pgd | mm->context); return; } preempt_disable(); -- cgit v1.2.3-59-g8ed1b From 8ffd74a0924e4e04f6455eb2d2187a9564678d01 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Sat, 26 Jan 2008 14:10:59 +0100 Subject: [S390] Avoid warnings in tlblush.h Signed-off-by: Martin Schwidefsky --- include/asm-s390/tlbflush.h | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/include/asm-s390/tlbflush.h b/include/asm-s390/tlbflush.h index a5e876539ec6..70fa5ae58180 100644 --- a/include/asm-s390/tlbflush.h +++ b/include/asm-s390/tlbflush.h @@ -106,9 +106,23 @@ static inline void __tlb_flush_mm_cond(struct mm_struct * mm) */ #define flush_tlb() do { } while (0) #define flush_tlb_all() do { } while (0) -#define flush_tlb_mm(mm) __tlb_flush_mm_cond(mm) #define flush_tlb_page(vma, addr) do { } while (0) -#define flush_tlb_range(vma, start, end) __tlb_flush_mm_cond(mm) -#define flush_tlb_kernel_range(start, end) __tlb_flush_mm(&init_mm) + +static inline void flush_tlb_mm(struct mm_struct *mm) +{ + __tlb_flush_mm_cond(mm); +} + +static inline void flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ + __tlb_flush_mm_cond(vma->vm_mm); +} + +static inline void flush_tlb_kernel_range(unsigned long start, + unsigned long end) +{ + __tlb_flush_mm(&init_mm); +} #endif /* _S390_TLBFLUSH_H */ -- cgit v1.2.3-59-g8ed1b From 5fd9c6e214547a32d3da6ee4284c79004d667bc8 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Sat, 26 Jan 2008 14:11:00 +0100 Subject: [S390] Change vmalloc defintions Currently the vmalloc area starts at a dynamic address depending on the memory size. There was also an 8MB security hole after the physical memory to catch out-of-bounds accesses. We can simplify the code by putting the vmalloc area explicitely at the top of the kernel mapping and setting the vmalloc size to a fixed value of 128MB/128GB for 31bit/64bit systems. Part of the vmalloc area will be used for the vmem_map. This leaves an area of 96MB/1GB for normal vmalloc allocations. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/setup.c | 6 +++--- arch/s390/mm/vmem.c | 20 +++++++------------- include/asm-s390/pgtable.h | 46 ++++++++++++++++------------------------------ 3 files changed, 26 insertions(+), 46 deletions(-) diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index d68a4025486e..d071a81b62da 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -617,7 +617,7 @@ EXPORT_SYMBOL_GPL(real_memory_size); static void __init setup_memory_end(void) { unsigned long memory_size; - unsigned long max_mem, max_phys; + unsigned long max_mem; int i; #if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_ZFCPDUMP_MODULE) @@ -625,10 +625,10 @@ static void __init setup_memory_end(void) memory_end = ZFCPDUMP_HSA_SIZE; #endif memory_size = 0; - max_phys = VMALLOC_END_INIT - VMALLOC_MIN_SIZE; memory_end &= PAGE_MASK; - max_mem = memory_end ? min(max_phys, memory_end) : max_phys; + max_mem = memory_end ? min(VMALLOC_START, memory_end) : VMALLOC_START; + memory_end = min(max_mem, memory_end); for (i = 0; i < MEMORY_CHUNKS; i++) { struct mem_chunk *chunk = &memory_chunk[i]; diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c index fb9c5a85aa56..ee625c8c3b28 100644 --- a/arch/s390/mm/vmem.c +++ b/arch/s390/mm/vmem.c @@ -15,10 +15,6 @@ #include #include -unsigned long vmalloc_end; -EXPORT_SYMBOL(vmalloc_end); - -static struct page *vmem_map; static DEFINE_MUTEX(vmem_mutex); struct memory_segment { @@ -188,8 +184,8 @@ static int vmem_add_mem_map(unsigned long start, unsigned long size) pte_t pte; int ret = -ENOMEM; - map_start = vmem_map + PFN_DOWN(start); - map_end = vmem_map + PFN_DOWN(start + size); + map_start = VMEM_MAP + PFN_DOWN(start); + map_end = VMEM_MAP + PFN_DOWN(start + size); start_addr = (unsigned long) map_start & PAGE_MASK; end_addr = PFN_ALIGN((unsigned long) map_end); @@ -254,7 +250,7 @@ static int insert_memory_segment(struct memory_segment *seg) { struct memory_segment *tmp; - if (PFN_DOWN(seg->start + seg->size) > max_pfn || + if (seg->start + seg->size >= VMALLOC_START || seg->start + seg->size < seg->start) return -ERANGE; @@ -357,17 +353,15 @@ out: /* * map whole physical memory to virtual memory (identity mapping) + * we reserve enough space in the vmalloc area for vmemmap to hotplug + * additional memory segments. */ void __init vmem_map_init(void) { - unsigned long map_size; int i; - map_size = ALIGN(max_low_pfn, MAX_ORDER_NR_PAGES) * sizeof(struct page); - vmalloc_end = PFN_ALIGN(VMALLOC_END_INIT) - PFN_ALIGN(map_size); - vmem_map = (struct page *) vmalloc_end; - NODE_DATA(0)->node_mem_map = vmem_map; - + BUILD_BUG_ON((unsigned long)VMEM_MAP + VMEM_MAP_SIZE > VMEM_MAP_MAX); + NODE_DATA(0)->node_mem_map = VMEM_MAP; for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) vmem_add_mem(memory_chunk[i].addr, memory_chunk[i].size); } diff --git a/include/asm-s390/pgtable.h b/include/asm-s390/pgtable.h index 1f530f8a6280..79b9eab1a0c7 100644 --- a/include/asm-s390/pgtable.h +++ b/include/asm-s390/pgtable.h @@ -104,41 +104,27 @@ extern char empty_zero_page[PAGE_SIZE]; #ifndef __ASSEMBLY__ /* - * Just any arbitrary offset to the start of the vmalloc VM area: the - * current 8MB value just means that there will be a 8MB "hole" after the - * physical memory until the kernel virtual memory starts. That means that - * any out-of-bounds memory accesses will hopefully be caught. - * The vmalloc() routines leaves a hole of 4kB between each vmalloced - * area for the same reason. ;) - * vmalloc area starts at 4GB to prevent syscall table entry exchanging - * from modules. - */ -extern unsigned long vmalloc_end; - -#ifdef CONFIG_64BIT -#define VMALLOC_ADDR (max(0x100000000UL, (unsigned long) high_memory)) -#else -#define VMALLOC_ADDR ((unsigned long) high_memory) -#endif -#define VMALLOC_OFFSET (8*1024*1024) -#define VMALLOC_START ((VMALLOC_ADDR + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)) -#define VMALLOC_END vmalloc_end - -/* - * We need some free virtual space to be able to do vmalloc. - * VMALLOC_MIN_SIZE defines the minimum size of the vmalloc - * area. On a machine with 2GB memory we make sure that we - * have at least 128MB free space for vmalloc. On a machine - * with 4TB we make sure we have at least 128GB. + * The vmalloc area will always be on the topmost area of the kernel + * mapping. We reserve 96MB (31bit) / 1GB (64bit) for vmalloc, + * which should be enough for any sane case. + * By putting vmalloc at the top, we maximise the gap between physical + * memory and vmalloc to catch misplaced memory accesses. As a side + * effect, this also makes sure that 64 bit module code cannot be used + * as system call address. */ #ifndef __s390x__ -#define VMALLOC_MIN_SIZE 0x8000000UL -#define VMALLOC_END_INIT 0x80000000UL +#define VMALLOC_START 0x78000000UL +#define VMALLOC_END 0x7e000000UL +#define VMEM_MAP_MAX 0x80000000UL #else /* __s390x__ */ -#define VMALLOC_MIN_SIZE 0x2000000000UL -#define VMALLOC_END_INIT 0x40000000000UL +#define VMALLOC_START 0x3e000000000UL +#define VMALLOC_END 0x3e040000000UL +#define VMEM_MAP_MAX 0x40000000000UL #endif /* __s390x__ */ +#define VMEM_MAP ((struct page *) VMALLOC_END) +#define VMEM_MAP_SIZE ((VMALLOC_START / PAGE_SIZE) * sizeof(struct page)) + /* * A 31 bit pagetable entry of S390 has following format: * | PFRA | | OS | -- cgit v1.2.3-59-g8ed1b From 5c699714d01ac358c58be9943234081b36b69cdd Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Sat, 26 Jan 2008 14:11:01 +0100 Subject: [S390] Print kernel version in dump_stack() and show_regs(). Also print PREEMPT and/or SMP if the kernel was configured that way. Makes s390 look a bit more like other architectures. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/process.c | 18 ++++++++++-------- arch/s390/kernel/traps.c | 20 +++++++++++++++++--- 2 files changed, 27 insertions(+), 11 deletions(-) diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c index 29f7884b4ffa..0e7aca039307 100644 --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -36,7 +36,7 @@ #include #include #include - +#include #include #include #include @@ -182,13 +182,15 @@ void cpu_idle(void) void show_regs(struct pt_regs *regs) { - struct task_struct *tsk = current; - - printk("CPU: %d %s\n", task_thread_info(tsk)->cpu, print_tainted()); - printk("Process %s (pid: %d, task: %p, ksp: %p)\n", - current->comm, task_pid_nr(current), (void *) tsk, - (void *) tsk->thread.ksp); - + print_modules(); + printk("CPU: %d %s %s %.*s\n", + task_thread_info(current)->cpu, print_tainted(), + init_utsname()->release, + (int)strcspn(init_utsname()->version, " "), + init_utsname()->version); + printk("Process %s (pid: %d, task: %p, ksp: %p)\n", + current->comm, current->pid, current, + (void *) current->thread.ksp); show_registers(regs); /* Show stack backtrace if pt_regs is from kernel mode */ if (!(regs->psw.mask & PSW_MASK_PSTATE)) diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c index 8ed16a83fba7..52b8342c6bf2 100644 --- a/arch/s390/kernel/traps.c +++ b/arch/s390/kernel/traps.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -168,9 +169,16 @@ void show_stack(struct task_struct *task, unsigned long *sp) */ void dump_stack(void) { + printk("CPU: %d %s %s %.*s\n", + task_thread_info(current)->cpu, print_tainted(), + init_utsname()->release, + (int)strcspn(init_utsname()->version, " "), + init_utsname()->version); + printk("Process %s (pid: %d, task: %p, ksp: %p)\n", + current->comm, current->pid, current, + (void *) current->thread.ksp); show_stack(NULL, NULL); } - EXPORT_SYMBOL(dump_stack); static inline int mask_bits(struct pt_regs *regs, unsigned long bits) @@ -258,8 +266,14 @@ void die(const char * str, struct pt_regs * regs, long err) console_verbose(); spin_lock_irq(&die_lock); bust_spinlocks(1); - printk("%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter); - print_modules(); + printk("%s: %04lx [#%d] ", str, err & 0xffff, ++die_counter); +#ifdef CONFIG_PREEMPT + printk("PREEMPT "); +#endif +#ifdef CONFIG_SMP + printk("SMP"); +#endif + printk("\n"); notify_die(DIE_OOPS, str, regs, err, current->thread.trap_no, SIGSEGV); show_regs(regs); bust_spinlocks(0); -- cgit v1.2.3-59-g8ed1b From 9f4b0ba81f158df459fa2cfc98ab1475c090f29c Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Sat, 26 Jan 2008 14:11:02 +0100 Subject: [S390] Get rid of HOLES_IN_ZONE requirement. Align everything to MAX_ORDER so we can get rid of the extra checks. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/Kconfig | 3 --- arch/s390/kernel/setup.c | 25 ++++++++++++++++++++++++- arch/s390/mm/vmem.c | 2 +- 3 files changed, 25 insertions(+), 5 deletions(-) diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 1330061020ab..6ef54d27fc00 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -276,9 +276,6 @@ source "kernel/Kconfig.preempt" source "mm/Kconfig" -config HOLES_IN_ZONE - def_bool y - comment "I/O subsystem configuration" config MACHCHK_WARNING diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index d071a81b62da..3a61bfc2c4fb 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -559,7 +559,9 @@ setup_resources(void) data_resource.start = (unsigned long) &_etext; data_resource.end = (unsigned long) &_edata - 1; - for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) { + for (i = 0; i < MEMORY_CHUNKS; i++) { + if (!memory_chunk[i].size) + continue; res = alloc_bootmem_low(sizeof(struct resource)); res->flags = IORESOURCE_BUSY | IORESOURCE_MEM; switch (memory_chunk[i].type) { @@ -630,6 +632,27 @@ static void __init setup_memory_end(void) max_mem = memory_end ? min(VMALLOC_START, memory_end) : VMALLOC_START; memory_end = min(max_mem, memory_end); + /* + * Make sure all chunks are MAX_ORDER aligned so we don't need the + * extra checks that HOLES_IN_ZONE would require. + */ + for (i = 0; i < MEMORY_CHUNKS; i++) { + unsigned long start, end; + struct mem_chunk *chunk; + unsigned long align; + + chunk = &memory_chunk[i]; + align = 1UL << (MAX_ORDER + PAGE_SHIFT - 1); + start = (chunk->addr + align - 1) & ~(align - 1); + end = (chunk->addr + chunk->size) & ~(align - 1); + if (start >= end) + memset(chunk, 0, sizeof(*chunk)); + else { + chunk->addr = start; + chunk->size = end - start; + } + } + for (i = 0; i < MEMORY_CHUNKS; i++) { struct mem_chunk *chunk = &memory_chunk[i]; diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c index ee625c8c3b28..1fc99891c4eb 100644 --- a/arch/s390/mm/vmem.c +++ b/arch/s390/mm/vmem.c @@ -376,7 +376,7 @@ static int __init vmem_convert_memory_chunk(void) int i; mutex_lock(&vmem_mutex); - for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) { + for (i = 0; i < MEMORY_CHUNKS; i++) { if (!memory_chunk[i].size) continue; seg = kzalloc(sizeof(*seg), GFP_KERNEL); -- cgit v1.2.3-59-g8ed1b From 3b4beb31759765efdda9f9431aebfedf828bbfe0 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Sat, 26 Jan 2008 14:11:03 +0100 Subject: [S390] Remove owner_pc member from raw_spinlock_t. Used to contain the address of the holder of the lock. But since the spinlock code is not inlined anymore all locks contain the same address anyway. And since in addtition nobody complained about that for ages its obviously unused. So remove it. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/lib/spinlock.c | 12 ++++-------- include/asm-s390/spinlock.h | 19 ++++++------------- include/asm-s390/spinlock_types.h | 1 - 3 files changed, 10 insertions(+), 22 deletions(-) diff --git a/arch/s390/lib/spinlock.c b/arch/s390/lib/spinlock.c index 8d76403fcf89..59c56c3d72d0 100644 --- a/arch/s390/lib/spinlock.c +++ b/arch/s390/lib/spinlock.c @@ -39,7 +39,7 @@ static inline void _raw_yield_cpu(int cpu) _raw_yield(); } -void _raw_spin_lock_wait(raw_spinlock_t *lp, unsigned int pc) +void _raw_spin_lock_wait(raw_spinlock_t *lp) { int count = spin_retry; unsigned int cpu = ~smp_processor_id(); @@ -53,15 +53,13 @@ void _raw_spin_lock_wait(raw_spinlock_t *lp, unsigned int pc) } if (__raw_spin_is_locked(lp)) continue; - if (_raw_compare_and_swap(&lp->owner_cpu, 0, cpu) == 0) { - lp->owner_pc = pc; + if (_raw_compare_and_swap(&lp->owner_cpu, 0, cpu) == 0) return; - } } } EXPORT_SYMBOL(_raw_spin_lock_wait); -int _raw_spin_trylock_retry(raw_spinlock_t *lp, unsigned int pc) +int _raw_spin_trylock_retry(raw_spinlock_t *lp) { unsigned int cpu = ~smp_processor_id(); int count; @@ -69,10 +67,8 @@ int _raw_spin_trylock_retry(raw_spinlock_t *lp, unsigned int pc) for (count = spin_retry; count > 0; count--) { if (__raw_spin_is_locked(lp)) continue; - if (_raw_compare_and_swap(&lp->owner_cpu, 0, cpu) == 0) { - lp->owner_pc = pc; + if (_raw_compare_and_swap(&lp->owner_cpu, 0, cpu) == 0) return 1; - } } return 0; } diff --git a/include/asm-s390/spinlock.h b/include/asm-s390/spinlock.h index 3fd43826fd0b..c1d6e7e304e2 100644 --- a/include/asm-s390/spinlock.h +++ b/include/asm-s390/spinlock.h @@ -58,39 +58,32 @@ _raw_compare_and_swap(volatile unsigned int *lock, do { while (__raw_spin_is_locked(lock)) \ _raw_spin_relax(lock); } while (0) -extern void _raw_spin_lock_wait(raw_spinlock_t *, unsigned int pc); -extern int _raw_spin_trylock_retry(raw_spinlock_t *, unsigned int pc); +extern void _raw_spin_lock_wait(raw_spinlock_t *); +extern int _raw_spin_trylock_retry(raw_spinlock_t *); extern void _raw_spin_relax(raw_spinlock_t *lock); static inline void __raw_spin_lock(raw_spinlock_t *lp) { - unsigned long pc = 1 | (unsigned long) __builtin_return_address(0); int old; old = _raw_compare_and_swap(&lp->owner_cpu, 0, ~smp_processor_id()); - if (likely(old == 0)) { - lp->owner_pc = pc; + if (likely(old == 0)) return; - } - _raw_spin_lock_wait(lp, pc); + _raw_spin_lock_wait(lp); } static inline int __raw_spin_trylock(raw_spinlock_t *lp) { - unsigned long pc = 1 | (unsigned long) __builtin_return_address(0); int old; old = _raw_compare_and_swap(&lp->owner_cpu, 0, ~smp_processor_id()); - if (likely(old == 0)) { - lp->owner_pc = pc; + if (likely(old == 0)) return 1; - } - return _raw_spin_trylock_retry(lp, pc); + return _raw_spin_trylock_retry(lp); } static inline void __raw_spin_unlock(raw_spinlock_t *lp) { - lp->owner_pc = 0; _raw_compare_and_swap(&lp->owner_cpu, lp->owner_cpu, 0); } diff --git a/include/asm-s390/spinlock_types.h b/include/asm-s390/spinlock_types.h index b7ac13f7aa37..654abc40de04 100644 --- a/include/asm-s390/spinlock_types.h +++ b/include/asm-s390/spinlock_types.h @@ -7,7 +7,6 @@ typedef struct { volatile unsigned int owner_cpu; - volatile unsigned int owner_pc; } __attribute__ ((aligned (4))) raw_spinlock_t; #define __RAW_SPIN_LOCK_UNLOCKED { 0 } -- cgit v1.2.3-59-g8ed1b From 519580fc179be6d06a40edd918747bd5f0e1b899 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Sat, 26 Jan 2008 14:11:04 +0100 Subject: [S390] Use new style spinlock initializer in __RWSEM_INITIALIZER. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- include/asm-s390/rwsem.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-s390/rwsem.h b/include/asm-s390/rwsem.h index 90f4eccaa290..9d2a17971805 100644 --- a/include/asm-s390/rwsem.h +++ b/include/asm-s390/rwsem.h @@ -91,8 +91,8 @@ struct rw_semaphore { #endif #define __RWSEM_INITIALIZER(name) \ -{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) \ - __RWSEM_DEP_MAP_INIT(name) } + { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait.lock), \ + LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) } #define DECLARE_RWSEM(name) \ struct rw_semaphore name = __RWSEM_INITIALIZER(name) -- cgit v1.2.3-59-g8ed1b From 48483b3290988952a593c6e66ca354c19f1a4350 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Sat, 26 Jan 2008 14:11:05 +0100 Subject: [S390] Get rid of additional_cpus kernel parameter. It caused only a lot of confusion. From now on cpu hotplug of up to NR_CPUS will work by default. If somebody wants to limit that then the possible_cpus parameter can be used. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- Documentation/cpu-hotplug.txt | 2 +- arch/s390/kernel/early.c | 1 - arch/s390/kernel/setup.c | 1 - arch/s390/kernel/smp.c | 180 ++++++++++++++++++------------------------ drivers/s390/char/sclp_cmd.c | 46 +---------- include/asm-s390/sclp.h | 1 - include/asm-s390/smp.h | 3 - 7 files changed, 79 insertions(+), 155 deletions(-) diff --git a/Documentation/cpu-hotplug.txt b/Documentation/cpu-hotplug.txt index fb94f5a71b68..ba0aacde94fb 100644 --- a/Documentation/cpu-hotplug.txt +++ b/Documentation/cpu-hotplug.txt @@ -50,7 +50,7 @@ additional_cpus=n (*) Use this to limit hotpluggable cpus. This option sets cpu_possible_map = cpu_present_map + additional_cpus (*) Option valid only for following architectures -- x86_64, ia64, s390 +- x86_64, ia64 ia64 and x86_64 use the number of disabled local apics in ACPI tables MADT to determine the number of potentially hot-pluggable cpus. The implementation diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c index c7cbb0114147..9f7b73b180f0 100644 --- a/arch/s390/kernel/early.c +++ b/arch/s390/kernel/early.c @@ -278,7 +278,6 @@ void __init startup_init(void) setup_lowcore_early(); sclp_read_info_early(); sclp_facilities_detect(); - sclp_read_cpu_info_early(); memsize = sclp_memory_detect(); #ifndef CONFIG_64BIT /* diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 3a61bfc2c4fb..cbdf3fb05e81 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -922,7 +922,6 @@ setup_arch(char **cmdline_p) cpu_init(); __cpu_logical_map[0] = S390_lowcore.cpu_data.cpu_addr; - smp_setup_cpu_possible_map(); /* * Setup capabilities (ELF_HWCAP & ELF_PLATFORM). diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 66fe28930d82..320e4e97bf52 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -54,7 +54,7 @@ EXPORT_SYMBOL(lowcore_ptr); cpumask_t cpu_online_map = CPU_MASK_NONE; EXPORT_SYMBOL(cpu_online_map); -cpumask_t cpu_possible_map = CPU_MASK_NONE; +cpumask_t cpu_possible_map = CPU_MASK_ALL; EXPORT_SYMBOL(cpu_possible_map); static struct task_struct *current_set[NR_CPUS]; @@ -399,7 +399,7 @@ static void __init smp_get_save_area(unsigned int cpu, unsigned int phy_cpu) "kernel was compiled with NR_CPUS=%i\n", cpu, NR_CPUS); return; } - zfcpdump_save_areas[cpu] = alloc_bootmem(sizeof(union save_area)); + zfcpdump_save_areas[cpu] = kmalloc(sizeof(union save_area), GFP_KERNEL); __cpu_logical_map[CPU_INIT_NO] = (__u16) phy_cpu; while (signal_processor(CPU_INIT_NO, sigp_stop_and_store_status) == sigp_busy) @@ -435,67 +435,6 @@ static int cpu_stopped(int cpu) return 0; } -/* - * Lets check how many CPUs we have. - */ -static void __init smp_count_cpus(unsigned int *configured_cpus, - unsigned int *standby_cpus) -{ - unsigned int cpu; - struct sclp_cpu_info *info; - u16 boot_cpu_addr, cpu_addr; - - boot_cpu_addr = S390_lowcore.cpu_data.cpu_addr; - current_thread_info()->cpu = 0; - *configured_cpus = 1; - *standby_cpus = 0; - - info = alloc_bootmem_pages(sizeof(*info)); - if (!info) - disabled_wait((unsigned long) __builtin_return_address(0)); - - /* Use sigp detection algorithm if sclp doesn't work. */ - if (sclp_get_cpu_info(info)) { - smp_use_sigp_detection = 1; - for (cpu = 0; cpu <= 65535; cpu++) { - if (cpu == boot_cpu_addr) - continue; - __cpu_logical_map[CPU_INIT_NO] = cpu; - if (cpu_stopped(CPU_INIT_NO)) - (*configured_cpus)++; - } - goto out; - } - - if (info->has_cpu_type) { - for (cpu = 0; cpu < info->combined; cpu++) { - if (info->cpu[cpu].address == boot_cpu_addr) { - smp_cpu_type = info->cpu[cpu].type; - break; - } - } - } - /* Count cpus. */ - for (cpu = 0; cpu < info->combined; cpu++) { - if (info->has_cpu_type && info->cpu[cpu].type != smp_cpu_type) - continue; - cpu_addr = info->cpu[cpu].address; - if (cpu_addr == boot_cpu_addr) - continue; - __cpu_logical_map[CPU_INIT_NO] = cpu_addr; - if (!cpu_stopped(CPU_INIT_NO)) { - (*standby_cpus)++; - continue; - } - smp_get_save_area(*configured_cpus, cpu_addr); - (*configured_cpus)++; - } -out: - printk(KERN_INFO "CPUs: %d configured, %d standby\n", - *configured_cpus, *standby_cpus); - free_bootmem((unsigned long) info, sizeof(*info)); -} - static int cpu_known(int cpu_id) { int cpu; @@ -529,7 +468,7 @@ static int smp_rescan_cpus_sigp(cpumask_t avail) return 0; } -static int __init_refok smp_rescan_cpus_sclp(cpumask_t avail) +static int smp_rescan_cpus_sclp(cpumask_t avail) { struct sclp_cpu_info *info; int cpu_id, logical_cpu, cpu; @@ -538,10 +477,7 @@ static int __init_refok smp_rescan_cpus_sclp(cpumask_t avail) logical_cpu = first_cpu(avail); if (logical_cpu == NR_CPUS) return 0; - if (slab_is_available()) - info = kmalloc(sizeof(*info), GFP_KERNEL); - else - info = alloc_bootmem(sizeof(*info)); + info = kmalloc(sizeof(*info), GFP_KERNEL); if (!info) return -ENOMEM; rc = sclp_get_cpu_info(info); @@ -564,10 +500,7 @@ static int __init_refok smp_rescan_cpus_sclp(cpumask_t avail) break; } out: - if (slab_is_available()) - kfree(info); - else - free_bootmem((unsigned long) info, sizeof(*info)); + kfree(info); return rc; } @@ -575,15 +508,71 @@ static int smp_rescan_cpus(void) { cpumask_t avail; - cpus_setall(avail); - cpus_and(avail, avail, cpu_possible_map); - cpus_andnot(avail, avail, cpu_present_map); + cpus_xor(avail, cpu_possible_map, cpu_present_map); if (smp_use_sigp_detection) return smp_rescan_cpus_sigp(avail); else return smp_rescan_cpus_sclp(avail); } +static void __init smp_detect_cpus(void) +{ + unsigned int cpu, c_cpus, s_cpus; + struct sclp_cpu_info *info; + u16 boot_cpu_addr, cpu_addr; + + c_cpus = 1; + s_cpus = 0; + boot_cpu_addr = S390_lowcore.cpu_data.cpu_addr; + info = kmalloc(sizeof(*info), GFP_KERNEL); + if (!info) + panic("smp_detect_cpus failed to allocate memory\n"); + /* Use sigp detection algorithm if sclp doesn't work. */ + if (sclp_get_cpu_info(info)) { + smp_use_sigp_detection = 1; + for (cpu = 0; cpu <= 65535; cpu++) { + if (cpu == boot_cpu_addr) + continue; + __cpu_logical_map[CPU_INIT_NO] = cpu; + if (!cpu_stopped(CPU_INIT_NO)) + continue; + smp_get_save_area(c_cpus, cpu); + c_cpus++; + } + goto out; + } + + if (info->has_cpu_type) { + for (cpu = 0; cpu < info->combined; cpu++) { + if (info->cpu[cpu].address == boot_cpu_addr) { + smp_cpu_type = info->cpu[cpu].type; + break; + } + } + } + + for (cpu = 0; cpu < info->combined; cpu++) { + if (info->has_cpu_type && info->cpu[cpu].type != smp_cpu_type) + continue; + cpu_addr = info->cpu[cpu].address; + if (cpu_addr == boot_cpu_addr) + continue; + __cpu_logical_map[CPU_INIT_NO] = cpu_addr; + if (!cpu_stopped(CPU_INIT_NO)) { + s_cpus++; + continue; + } + smp_get_save_area(c_cpus, cpu_addr); + c_cpus++; + } +out: + kfree(info); + printk(KERN_INFO "CPUs: %d configured, %d standby\n", c_cpus, s_cpus); + lock_cpu_hotplug(); + smp_rescan_cpus(); + unlock_cpu_hotplug(); +} + /* * Activate a secondary processor. */ @@ -674,41 +663,20 @@ int __cpu_up(unsigned int cpu) return 0; } -static unsigned int __initdata additional_cpus; -static unsigned int __initdata possible_cpus; - -void __init smp_setup_cpu_possible_map(void) -{ - unsigned int pos_cpus, cpu; - unsigned int configured_cpus, standby_cpus; - - smp_count_cpus(&configured_cpus, &standby_cpus); - pos_cpus = min(configured_cpus + standby_cpus + additional_cpus, - (unsigned int) NR_CPUS); - if (possible_cpus) - pos_cpus = min(possible_cpus, (unsigned int) NR_CPUS); - for (cpu = 0; cpu < pos_cpus; cpu++) - cpu_set(cpu, cpu_possible_map); - cpu_present_map = cpumask_of_cpu(0); - smp_rescan_cpus(); -} - -#ifdef CONFIG_HOTPLUG_CPU - -static int __init setup_additional_cpus(char *s) -{ - additional_cpus = simple_strtoul(s, NULL, 0); - return 0; -} -early_param("additional_cpus", setup_additional_cpus); - static int __init setup_possible_cpus(char *s) { - possible_cpus = simple_strtoul(s, NULL, 0); + int pcpus, cpu; + + pcpus = simple_strtoul(s, NULL, 0); + cpu_possible_map = cpumask_of_cpu(0); + for (cpu = 1; cpu < pcpus && cpu < NR_CPUS; cpu++) + cpu_set(cpu, cpu_possible_map); return 0; } early_param("possible_cpus", setup_possible_cpus); +#ifdef CONFIG_HOTPLUG_CPU + int __cpu_disable(void) { struct ec_creg_mask_parms cr_parms; @@ -768,6 +736,8 @@ void __init smp_prepare_cpus(unsigned int max_cpus) unsigned int cpu; int i; + smp_detect_cpus(); + /* request the 0x1201 emergency signal external interrupt */ if (register_external_interrupt(0x1201, do_ext_call_interrupt) != 0) panic("Couldn't request external interrupt 0x1201"); @@ -816,6 +786,8 @@ void __init smp_prepare_boot_cpu(void) { BUG_ON(smp_processor_id() != 0); + current_thread_info()->cpu = 0; + cpu_set(0, cpu_present_map); cpu_set(0, cpu_online_map); S390_lowcore.percpu_offset = __per_cpu_offset[0]; current_set[0] = current; diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c index d7e6f4d65b78..b5c23396f8fe 100644 --- a/drivers/s390/char/sclp_cmd.c +++ b/drivers/s390/char/sclp_cmd.c @@ -191,9 +191,6 @@ struct read_cpu_info_sccb { u8 reserved[4096 - 16]; } __attribute__((packed, aligned(PAGE_SIZE))); -static struct read_cpu_info_sccb __initdata early_read_cpu_info_sccb; -static struct sclp_cpu_info __initdata sclp_cpu_info; - static void sclp_fill_cpu_info(struct sclp_cpu_info *info, struct read_cpu_info_sccb *sccb) { @@ -208,48 +205,16 @@ static void sclp_fill_cpu_info(struct sclp_cpu_info *info, info->combined * sizeof(struct sclp_cpu_entry)); } -void __init sclp_read_cpu_info_early(void) -{ - int rc; - struct read_cpu_info_sccb *sccb; - - if (!SCLP_HAS_CPU_INFO) - return; - - sccb = &early_read_cpu_info_sccb; - do { - memset(sccb, 0, sizeof(*sccb)); - sccb->header.length = sizeof(*sccb); - rc = sclp_cmd_sync_early(SCLP_CMDW_READ_CPU_INFO, sccb); - } while (rc == -EBUSY); - - if (rc) - return; - if (sccb->header.response_code != 0x10) - return; - sclp_fill_cpu_info(&sclp_cpu_info, sccb); -} - -static int __init sclp_get_cpu_info_early(struct sclp_cpu_info *info) -{ - if (!SCLP_HAS_CPU_INFO) - return -EOPNOTSUPP; - *info = sclp_cpu_info; - return 0; -} - -static int sclp_get_cpu_info_late(struct sclp_cpu_info *info) +int sclp_get_cpu_info(struct sclp_cpu_info *info) { int rc; struct read_cpu_info_sccb *sccb; if (!SCLP_HAS_CPU_INFO) return -EOPNOTSUPP; - sccb = (struct read_cpu_info_sccb *) __get_free_page(GFP_KERNEL - | GFP_DMA); + sccb = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA); if (!sccb) return -ENOMEM; - memset(sccb, 0, sizeof(*sccb)); sccb->header.length = sizeof(*sccb); rc = do_sync_request(SCLP_CMDW_READ_CPU_INFO, sccb); if (rc) @@ -266,13 +231,6 @@ out: return rc; } -int __init_refok sclp_get_cpu_info(struct sclp_cpu_info *info) -{ - if (slab_is_available()) - return sclp_get_cpu_info_late(info); - return sclp_get_cpu_info_early(info); -} - struct cpu_configure_sccb { struct sccb_header header; } __attribute__((packed, aligned(8))); diff --git a/include/asm-s390/sclp.h b/include/asm-s390/sclp.h index b8c7695cd4c8..b5f2843013a3 100644 --- a/include/asm-s390/sclp.h +++ b/include/asm-s390/sclp.h @@ -46,7 +46,6 @@ int sclp_get_cpu_info(struct sclp_cpu_info *info); int sclp_cpu_configure(u8 cpu); int sclp_cpu_deconfigure(u8 cpu); void sclp_read_info_early(void); -void sclp_read_cpu_info_early(void); void sclp_facilities_detect(void); unsigned long long sclp_memory_detect(void); int sclp_sdias_blk_count(void); diff --git a/include/asm-s390/smp.h b/include/asm-s390/smp.h index 07708c07701e..218454b91862 100644 --- a/include/asm-s390/smp.h +++ b/include/asm-s390/smp.h @@ -35,8 +35,6 @@ extern void machine_restart_smp(char *); extern void machine_halt_smp(void); extern void machine_power_off_smp(void); -extern void smp_setup_cpu_possible_map(void); - #define NO_PROC_ID 0xFF /* No processor magic marker */ /* @@ -103,7 +101,6 @@ static inline void smp_send_stop(void) #define hard_smp_processor_id() 0 #define smp_cpu_not_running(cpu) 1 -#define smp_setup_cpu_possible_map() do { } while (0) #endif extern union save_area *zfcpdump_save_areas[NR_CPUS + 1]; -- cgit v1.2.3-59-g8ed1b From 81ef16e763bb899053e06f6050603a305456a085 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Sat, 26 Jan 2008 14:11:06 +0100 Subject: [S390] Remove appldata include from sysctl_check.c Forgot to remove this when removing the appldata binary sysctls. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- kernel/sysctl_check.c | 1 - 1 file changed, 1 deletion(-) diff --git a/kernel/sysctl_check.c b/kernel/sysctl_check.c index a68425a5cc1d..d8a5558a47b4 100644 --- a/kernel/sysctl_check.c +++ b/kernel/sysctl_check.c @@ -1,6 +1,5 @@ #include #include -#include "../arch/s390/appldata/appldata.h" #include "../fs/xfs/linux-2.6/xfs_sysctl.h" #include #include -- cgit v1.2.3-59-g8ed1b From 3f5615e012b4593943bbc2a6c3ce150bb33e1966 Mon Sep 17 00:00:00 2001 From: Jan Glauber Date: Sat, 26 Jan 2008 14:11:07 +0100 Subject: [S390] crypto: move s390 Kconfig options. Move s390 crypto Kconfig options to drivers/crypto/Kconfig to have all hardware crypto devices in one place. This also makes messing up the kernel source tree easier for some people. Signed-off-by: Jan Glauber Signed-off-by: Martin Schwidefsky --- arch/s390/crypto/Kconfig | 60 --------------------------------------------- drivers/crypto/Kconfig | 63 ++++++++++++++++++++++++++++++++++++++++++++++-- 2 files changed, 61 insertions(+), 62 deletions(-) delete mode 100644 arch/s390/crypto/Kconfig diff --git a/arch/s390/crypto/Kconfig b/arch/s390/crypto/Kconfig deleted file mode 100644 index d1defbbfcd81..000000000000 --- a/arch/s390/crypto/Kconfig +++ /dev/null @@ -1,60 +0,0 @@ -config CRYPTO_SHA1_S390 - tristate "SHA1 digest algorithm" - depends on S390 - select CRYPTO_ALGAPI - help - This is the s390 hardware accelerated implementation of the - SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2). - -config CRYPTO_SHA256_S390 - tristate "SHA256 digest algorithm" - depends on S390 - select CRYPTO_ALGAPI - help - This is the s390 hardware accelerated implementation of the - SHA256 secure hash standard (DFIPS 180-2). - - This version of SHA implements a 256 bit hash with 128 bits of - security against collision attacks. - -config CRYPTO_DES_S390 - tristate "DES and Triple DES cipher algorithms" - depends on S390 - select CRYPTO_ALGAPI - select CRYPTO_BLKCIPHER - help - This us the s390 hardware accelerated implementation of the - DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3). - -config CRYPTO_AES_S390 - tristate "AES cipher algorithms" - depends on S390 - select CRYPTO_ALGAPI - select CRYPTO_BLKCIPHER - help - This is the s390 hardware accelerated implementation of the - AES cipher algorithms (FIPS-197). AES uses the Rijndael - algorithm. - - Rijndael appears to be consistently a very good performer in - both hardware and software across a wide range of computing - environments regardless of its use in feedback or non-feedback - modes. Its key setup time is excellent, and its key agility is - good. Rijndael's very low memory requirements make it very well - suited for restricted-space environments, in which it also - demonstrates excellent performance. Rijndael's operations are - among the easiest to defend against power and timing attacks. - - On s390 the System z9-109 currently only supports the key size - of 128 bit. - -config S390_PRNG - tristate "Pseudo random number generator device driver" - depends on S390 - default "m" - help - Select this option if you want to use the s390 pseudo random number - generator. The PRNG is part of the cryptographic processor functions - and uses triple-DES to generate secure random numbers like the - ANSI X9.17 standard. The PRNG is usable via the char device - /dev/prandom. diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig index 8a70a9edabda..6b658d84d521 100644 --- a/drivers/crypto/Kconfig +++ b/drivers/crypto/Kconfig @@ -48,8 +48,6 @@ config CRYPTO_DEV_PADLOCK_SHA If unsure say M. The compiled module will be called padlock-sha.ko -source "arch/s390/crypto/Kconfig" - config CRYPTO_DEV_GEODE tristate "Support for the Geode LX AES engine" depends on X86_32 && PCI @@ -83,6 +81,67 @@ config ZCRYPT_MONOLITHIC that contains all parts of the crypto device driver (ap bus, request router and all the card drivers). +config CRYPTO_SHA1_S390 + tristate "SHA1 digest algorithm" + depends on S390 + select CRYPTO_ALGAPI + help + This is the s390 hardware accelerated implementation of the + SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2). + +config CRYPTO_SHA256_S390 + tristate "SHA256 digest algorithm" + depends on S390 + select CRYPTO_ALGAPI + help + This is the s390 hardware accelerated implementation of the + SHA256 secure hash standard (DFIPS 180-2). + + This version of SHA implements a 256 bit hash with 128 bits of + security against collision attacks. + +config CRYPTO_DES_S390 + tristate "DES and Triple DES cipher algorithms" + depends on S390 + select CRYPTO_ALGAPI + select CRYPTO_BLKCIPHER + help + This us the s390 hardware accelerated implementation of the + DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3). + +config CRYPTO_AES_S390 + tristate "AES cipher algorithms" + depends on S390 + select CRYPTO_ALGAPI + select CRYPTO_BLKCIPHER + help + This is the s390 hardware accelerated implementation of the + AES cipher algorithms (FIPS-197). AES uses the Rijndael + algorithm. + + Rijndael appears to be consistently a very good performer in + both hardware and software across a wide range of computing + environments regardless of its use in feedback or non-feedback + modes. Its key setup time is excellent, and its key agility is + good. Rijndael's very low memory requirements make it very well + suited for restricted-space environments, in which it also + demonstrates excellent performance. Rijndael's operations are + among the easiest to defend against power and timing attacks. + + On s390 the System z9-109 currently only supports the key size + of 128 bit. + +config S390_PRNG + tristate "Pseudo random number generator device driver" + depends on S390 + default "m" + help + Select this option if you want to use the s390 pseudo random number + generator. The PRNG is part of the cryptographic processor functions + and uses triple-DES to generate secure random numbers like the + ANSI X9.17 standard. The PRNG is usable via the char device + /dev/prandom. + config CRYPTO_DEV_HIFN_795X tristate "Driver HIFN 795x crypto accelerator chips" select CRYPTO_DES -- cgit v1.2.3-59-g8ed1b From de3e0da1270bccb046885fbf1baa9140721de7e0 Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Sat, 26 Jan 2008 14:11:08 +0100 Subject: [S390] dasd: fix return value of dasd_generic_probe() Using the return value of ccw_device_set_online as return value for dasd_generic_probe() causes the DASD to fail setting online Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index e6bfce690ca3..da4fe1ecef9e 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -1969,9 +1969,10 @@ dasd_generic_probe (struct ccw_device *cdev, ret = ccw_device_set_online(cdev); if (ret) printk(KERN_WARNING - "dasd_generic_probe: could not initially online " - "ccw-device %s\n", cdev->dev.bus_id); - return ret; + "dasd_generic_probe: could not initially " + "online ccw-device %s; return code: %d\n", + cdev->dev.bus_id, ret); + return 0; } /* -- cgit v1.2.3-59-g8ed1b From cfe7381cea542248766808e7de9a9e7bceecce1a Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sat, 26 Jan 2008 14:11:09 +0100 Subject: [S390] arch/s390: Add missing "space" Signed-off-by: Joe Perches Signed-off-by: Martin Schwidefsky --- arch/s390/crypto/aes_s390.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c index 46c97058ebe1..a3f67f8b5427 100644 --- a/arch/s390/crypto/aes_s390.c +++ b/arch/s390/crypto/aes_s390.c @@ -516,7 +516,7 @@ static int __init aes_init(void) /* z9 109 and z9 BC/EC only support 128 bit key length */ if (keylen_flag == AES_KEYLEN_128) printk(KERN_INFO - "aes_s390: hardware acceleration only available for" + "aes_s390: hardware acceleration only available for " "128 bit keys\n"); ret = crypto_register_alg(&aes_alg); -- cgit v1.2.3-59-g8ed1b From ceb3dfbae1d3faacaedfc64c913fd18cd3624f72 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sat, 26 Jan 2008 14:11:10 +0100 Subject: [S390] drivers/s390: Add missing "space" Signed-off-by: Joe Perches Signed-off-by: Martin Schwidefsky --- drivers/s390/char/monwriter.c | 2 +- drivers/s390/char/vmlogrdr.c | 2 +- drivers/s390/cio/chsc.c | 2 +- drivers/s390/net/claw.c | 2 +- drivers/s390/net/lcs.c | 2 +- drivers/s390/scsi/zfcp_fsf.c | 10 +++++----- 6 files changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/s390/char/monwriter.c b/drivers/s390/char/monwriter.c index 20442fbf9346..a86c0534cd49 100644 --- a/drivers/s390/char/monwriter.c +++ b/drivers/s390/char/monwriter.c @@ -295,7 +295,7 @@ module_init(mon_init); module_exit(mon_exit); module_param_named(max_bufs, mon_max_bufs, int, 0644); -MODULE_PARM_DESC(max_bufs, "Maximum number of sample monitor data buffers" +MODULE_PARM_DESC(max_bufs, "Maximum number of sample monitor data buffers " "that can be active at one time"); MODULE_AUTHOR("Melissa Howland "); diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c index e0c4c508e121..d364e0bfae12 100644 --- a/drivers/s390/char/vmlogrdr.c +++ b/drivers/s390/char/vmlogrdr.c @@ -683,7 +683,7 @@ static int vmlogrdr_register_driver(void) /* Register with iucv driver */ ret = iucv_register(&vmlogrdr_iucv_handler, 1); if (ret) { - printk (KERN_ERR "vmlogrdr: failed to register with" + printk (KERN_ERR "vmlogrdr: failed to register with " "iucv driver\n"); goto out; } diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c index 93e6f74187ee..e7ba16a74ef7 100644 --- a/drivers/s390/cio/chsc.c +++ b/drivers/s390/cio/chsc.c @@ -1042,7 +1042,7 @@ chsc_determine_css_characteristics(void) scsc_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); if (!scsc_area) { - CIO_MSG_EVENT(0, "Was not able to determine available" + CIO_MSG_EVENT(0, "Was not able to determine available " "CHSCs due to no memory.\n"); return -ENOMEM; } diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c index 3561982749e3..c3076217871e 100644 --- a/drivers/s390/net/claw.c +++ b/drivers/s390/net/claw.c @@ -2416,7 +2416,7 @@ init_ccw_bk(struct net_device *dev) privptr->p_buff_pages_perwrite); #endif if (p_buff==NULL) { - printk(KERN_INFO "%s:%s __get_free_pages" + printk(KERN_INFO "%s:%s __get_free_pages " "for writes buf failed : get is for %d pages\n", dev->name, __FUNCTION__, diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c index 0fd663b23d76..7bfe8d707a34 100644 --- a/drivers/s390/net/lcs.c +++ b/drivers/s390/net/lcs.c @@ -1115,7 +1115,7 @@ list_modified: rc = lcs_send_setipm(card, ipm); spin_lock_irqsave(&card->ipm_lock, flags); if (rc) { - PRINT_INFO("Adding multicast address failed." + PRINT_INFO("Adding multicast address failed. " "Table possibly full!\n"); /* store ipm in failed list -> will be added * to ipm_list again, so a retry will be done diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index fe57941ab55d..e45f85f7c7ed 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -502,7 +502,7 @@ zfcp_fsf_fsfstatus_qual_eval(struct zfcp_fsf_req *fsf_req) fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; break; case FSF_SQ_NO_RECOM: - ZFCP_LOG_NORMAL("bug: No recommendation could be given for a" + ZFCP_LOG_NORMAL("bug: No recommendation could be given for a " "problem on the adapter %s " "Stopping all operations on this adapter. ", zfcp_get_busid_by_adapter(fsf_req->adapter)); @@ -813,7 +813,7 @@ zfcp_fsf_status_read_port_closed(struct zfcp_fsf_req *fsf_req) read_unlock_irqrestore(&zfcp_data.config_lock, flags); if (!port || (port->d_id != (status_buffer->d_id & ZFCP_DID_MASK))) { - ZFCP_LOG_NORMAL("bug: Reopen port indication received for" + ZFCP_LOG_NORMAL("bug: Reopen port indication received for " "nonexisting port with d_id 0x%06x on " "adapter %s. Ignored.\n", status_buffer->d_id & ZFCP_DID_MASK, @@ -2281,7 +2281,7 @@ zfcp_fsf_exchange_port_data(struct zfcp_erp_action *erp_action) &lock_flags, &fsf_req); if (retval) { ZFCP_LOG_INFO("error: Out of resources. Could not create an " - "exchange port data request for" + "exchange port data request for " "the adapter %s.\n", zfcp_get_busid_by_adapter(adapter)); write_unlock_irqrestore(&adapter->request_queue.queue_lock, @@ -2340,7 +2340,7 @@ zfcp_fsf_exchange_port_data_sync(struct zfcp_adapter *adapter, 0, NULL, &lock_flags, &fsf_req); if (retval) { ZFCP_LOG_INFO("error: Out of resources. Could not create an " - "exchange port data request for" + "exchange port data request for " "the adapter %s.\n", zfcp_get_busid_by_adapter(adapter)); write_unlock_irqrestore(&adapter->request_queue.queue_lock, @@ -4725,7 +4725,7 @@ zfcp_fsf_req_create(struct zfcp_adapter *adapter, u32 fsf_cmd, int req_flags, /* allocate new FSF request */ fsf_req = zfcp_fsf_req_alloc(pool, req_flags); if (unlikely(NULL == fsf_req)) { - ZFCP_LOG_DEBUG("error: Could not put an FSF request into" + ZFCP_LOG_DEBUG("error: Could not put an FSF request into " "the outbound (send) queue.\n"); ret = -ENOMEM; goto failed_fsf_req; -- cgit v1.2.3-59-g8ed1b From 99ca4e582d4a4088969681efff97be44d98421a1 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Sat, 26 Jan 2008 14:11:11 +0100 Subject: [S390] kernel: Shutdown Actions Interface In case of a kernel panic it is currently possible to specify that a dump should be created, the system should be rebooted or stopped. Virtual sysfs files under the directory /sys/firmware/ are used for that configuration. In addition to that, there are kernel parameters 'vmhalt', 'vmpoff' and 'vmpanic', which can be used to specify z/VM commands, which are automatically executed in case of halt, power off or a kernel panic. This patch combines both functionalities and allows to specify the z/VM CP commands also via sysfs attributes. In addition to that, it enhances the existing handling of shutdown triggers (e.g. halt or panic) and associated shutdown actions (e.g. dump or reipl) and makes it more flexible. Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/ipl.c | 953 ++++++++++++++++++++++++++++++----------------- arch/s390/kernel/setup.c | 103 +---- arch/s390/kernel/smp.c | 27 -- include/asm-s390/ipl.h | 4 +- 4 files changed, 614 insertions(+), 473 deletions(-) diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index b97694fa62ec..d73aff63725f 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -2,7 +2,7 @@ * arch/s390/kernel/ipl.c * ipl/reipl/dump support for Linux on s390. * - * Copyright (C) IBM Corp. 2005,2006 + * Copyright IBM Corp. 2005,2007 * Author(s): Michael Holzheu * Heiko Carstens * Volker Sameske @@ -31,6 +31,43 @@ #define IPL_FCP_DUMP_STR "fcp_dump" #define IPL_NSS_STR "nss" +#define DUMP_CCW_STR "ccw" +#define DUMP_FCP_STR "fcp" +#define DUMP_NONE_STR "none" + +/* + * Four shutdown trigger types are supported: + * - panic + * - halt + * - power off + * - reipl + */ +#define ON_PANIC_STR "on_panic" +#define ON_HALT_STR "on_halt" +#define ON_POFF_STR "on_poff" +#define ON_REIPL_STR "on_reboot" + +struct shutdown_action; +struct shutdown_trigger { + char *name; + struct shutdown_action *action; +}; + +/* + * Five shutdown action types are supported: + */ +#define SHUTDOWN_ACTION_IPL_STR "ipl" +#define SHUTDOWN_ACTION_REIPL_STR "reipl" +#define SHUTDOWN_ACTION_DUMP_STR "dump" +#define SHUTDOWN_ACTION_VMCMD_STR "vmcmd" +#define SHUTDOWN_ACTION_STOP_STR "stop" + +struct shutdown_action { + char *name; + void (*fn) (struct shutdown_trigger *trigger); + int (*init) (void); +}; + static char *ipl_type_str(enum ipl_type type) { switch (type) { @@ -54,10 +91,6 @@ enum dump_type { DUMP_TYPE_FCP = 4, }; -#define DUMP_NONE_STR "none" -#define DUMP_CCW_STR "ccw" -#define DUMP_FCP_STR "fcp" - static char *dump_type_str(enum dump_type type) { switch (type) { @@ -99,30 +132,6 @@ enum dump_method { DUMP_METHOD_FCP_DIAG, }; -enum shutdown_action { - SHUTDOWN_REIPL, - SHUTDOWN_DUMP, - SHUTDOWN_STOP, -}; - -#define SHUTDOWN_REIPL_STR "reipl" -#define SHUTDOWN_DUMP_STR "dump" -#define SHUTDOWN_STOP_STR "stop" - -static char *shutdown_action_str(enum shutdown_action action) -{ - switch (action) { - case SHUTDOWN_REIPL: - return SHUTDOWN_REIPL_STR; - case SHUTDOWN_DUMP: - return SHUTDOWN_DUMP_STR; - case SHUTDOWN_STOP: - return SHUTDOWN_STOP_STR; - default: - return NULL; - } -} - static int diag308_set_works = 0; static int reipl_capabilities = IPL_TYPE_UNKNOWN; @@ -140,8 +149,6 @@ static enum dump_method dump_method = DUMP_METHOD_NONE; static struct ipl_parameter_block *dump_block_fcp; static struct ipl_parameter_block *dump_block_ccw; -static enum shutdown_action on_panic_action = SHUTDOWN_STOP; - static struct sclp_ipl_info sclp_ipl_info; int diag308(unsigned long subcode, void *addr) @@ -205,8 +212,8 @@ static ssize_t sys_##_prefix##_##_name##_store(struct kobject *kobj, \ struct kobj_attribute *attr, \ const char *buf, size_t len) \ { \ - if (sscanf(buf, _fmt_in, _value) != 1) \ - return -EINVAL; \ + strncpy(_value, buf, sizeof(_value) - 1); \ + strstrip(_value); \ return len; \ } \ static struct kobj_attribute sys_##_prefix##_##_name##_attr = \ @@ -245,33 +252,6 @@ static __init enum ipl_type get_ipl_type(void) return IPL_TYPE_FCP; } -void __init setup_ipl_info(void) -{ - ipl_info.type = get_ipl_type(); - switch (ipl_info.type) { - case IPL_TYPE_CCW: - ipl_info.data.ccw.dev_id.devno = ipl_devno; - ipl_info.data.ccw.dev_id.ssid = 0; - break; - case IPL_TYPE_FCP: - case IPL_TYPE_FCP_DUMP: - ipl_info.data.fcp.dev_id.devno = - IPL_PARMBLOCK_START->ipl_info.fcp.devno; - ipl_info.data.fcp.dev_id.ssid = 0; - ipl_info.data.fcp.wwpn = IPL_PARMBLOCK_START->ipl_info.fcp.wwpn; - ipl_info.data.fcp.lun = IPL_PARMBLOCK_START->ipl_info.fcp.lun; - break; - case IPL_TYPE_NSS: - strncpy(ipl_info.data.nss.name, kernel_nss_name, - sizeof(ipl_info.data.nss.name)); - break; - case IPL_TYPE_UNKNOWN: - default: - /* We have no info to copy */ - break; - } -} - struct ipl_info ipl_info; EXPORT_SYMBOL_GPL(ipl_info); @@ -428,8 +408,74 @@ static struct attribute_group ipl_unknown_attr_group = { static struct kset *ipl_kset; +static int __init ipl_register_fcp_files(void) +{ + int rc; + + rc = sysfs_create_group(&ipl_kset->kobj, &ipl_fcp_attr_group); + if (rc) + goto out; + rc = sysfs_create_bin_file(&ipl_kset->kobj, &ipl_parameter_attr); + if (rc) + goto out_ipl_parm; + rc = sysfs_create_bin_file(&ipl_kset->kobj, &ipl_scp_data_attr); + if (!rc) + goto out; + + sysfs_remove_bin_file(&ipl_kset->kobj, &ipl_parameter_attr); + +out_ipl_parm: + sysfs_remove_group(&ipl_kset->kobj, &ipl_fcp_attr_group); +out: + return rc; +} + +static void ipl_run(struct shutdown_trigger *trigger) +{ + diag308(DIAG308_IPL, NULL); + if (MACHINE_IS_VM) + __cpcmd("IPL", NULL, 0, NULL); + else if (ipl_info.type == IPL_TYPE_CCW) + reipl_ccw_dev(&ipl_info.data.ccw.dev_id); +} + +static int ipl_init(void) +{ + int rc; + + ipl_kset = kset_create_and_add("ipl", NULL, firmware_kobj); + if (!ipl_kset) { + rc = -ENOMEM; + goto out; + } + switch (ipl_info.type) { + case IPL_TYPE_CCW: + rc = sysfs_create_group(&ipl_kset->kobj, &ipl_ccw_attr_group); + break; + case IPL_TYPE_FCP: + case IPL_TYPE_FCP_DUMP: + rc = ipl_register_fcp_files(); + break; + case IPL_TYPE_NSS: + rc = sysfs_create_group(&ipl_kset->kobj, &ipl_nss_attr_group); + break; + default: + rc = sysfs_create_group(&ipl_kset->kobj, + &ipl_unknown_attr_group); + break; + } +out: + if (rc) + panic("ipl_init failed: rc = %i\n", rc); + + return 0; +} + +static struct shutdown_action ipl_action = {SHUTDOWN_ACTION_IPL_STR, ipl_run, + ipl_init}; + /* - * reipl section + * reipl shutdown action: Reboot Linux on shutdown. */ /* FCP reipl device attributes */ @@ -600,143 +646,11 @@ static ssize_t reipl_type_store(struct kobject *kobj, } static struct kobj_attribute reipl_type_attr = - __ATTR(reipl_type, 0644, reipl_type_show, reipl_type_store); + __ATTR(reipl_type, 0644, reipl_type_show, reipl_type_store); static struct kset *reipl_kset; -/* - * dump section - */ - -/* FCP dump device attributes */ - -DEFINE_IPL_ATTR_RW(dump_fcp, wwpn, "0x%016llx\n", "%016llx\n", - dump_block_fcp->ipl_info.fcp.wwpn); -DEFINE_IPL_ATTR_RW(dump_fcp, lun, "0x%016llx\n", "%016llx\n", - dump_block_fcp->ipl_info.fcp.lun); -DEFINE_IPL_ATTR_RW(dump_fcp, bootprog, "%lld\n", "%lld\n", - dump_block_fcp->ipl_info.fcp.bootprog); -DEFINE_IPL_ATTR_RW(dump_fcp, br_lba, "%lld\n", "%lld\n", - dump_block_fcp->ipl_info.fcp.br_lba); -DEFINE_IPL_ATTR_RW(dump_fcp, device, "0.0.%04llx\n", "0.0.%llx\n", - dump_block_fcp->ipl_info.fcp.devno); - -static struct attribute *dump_fcp_attrs[] = { - &sys_dump_fcp_device_attr.attr, - &sys_dump_fcp_wwpn_attr.attr, - &sys_dump_fcp_lun_attr.attr, - &sys_dump_fcp_bootprog_attr.attr, - &sys_dump_fcp_br_lba_attr.attr, - NULL, -}; - -static struct attribute_group dump_fcp_attr_group = { - .name = IPL_FCP_STR, - .attrs = dump_fcp_attrs, -}; - -/* CCW dump device attributes */ - -DEFINE_IPL_ATTR_RW(dump_ccw, device, "0.0.%04llx\n", "0.0.%llx\n", - dump_block_ccw->ipl_info.ccw.devno); - -static struct attribute *dump_ccw_attrs[] = { - &sys_dump_ccw_device_attr.attr, - NULL, -}; - -static struct attribute_group dump_ccw_attr_group = { - .name = IPL_CCW_STR, - .attrs = dump_ccw_attrs, -}; - -/* dump type */ - -static int dump_set_type(enum dump_type type) -{ - if (!(dump_capabilities & type)) - return -EINVAL; - switch(type) { - case DUMP_TYPE_CCW: - if (MACHINE_IS_VM) - dump_method = DUMP_METHOD_CCW_VM; - else if (diag308_set_works) - dump_method = DUMP_METHOD_CCW_DIAG; - else - dump_method = DUMP_METHOD_CCW_CIO; - break; - case DUMP_TYPE_FCP: - dump_method = DUMP_METHOD_FCP_DIAG; - break; - default: - dump_method = DUMP_METHOD_NONE; - } - dump_type = type; - return 0; -} - -static ssize_t dump_type_show(struct kobject *kobj, - struct kobj_attribute *attr, char *page) -{ - return sprintf(page, "%s\n", dump_type_str(dump_type)); -} - -static ssize_t dump_type_store(struct kobject *kobj, - struct kobj_attribute *attr, - const char *buf, size_t len) -{ - int rc = -EINVAL; - - if (strncmp(buf, DUMP_NONE_STR, strlen(DUMP_NONE_STR)) == 0) - rc = dump_set_type(DUMP_TYPE_NONE); - else if (strncmp(buf, DUMP_CCW_STR, strlen(DUMP_CCW_STR)) == 0) - rc = dump_set_type(DUMP_TYPE_CCW); - else if (strncmp(buf, DUMP_FCP_STR, strlen(DUMP_FCP_STR)) == 0) - rc = dump_set_type(DUMP_TYPE_FCP); - return (rc != 0) ? rc : len; -} - -static struct kobj_attribute dump_type_attr = - __ATTR(dump_type, 0644, dump_type_show, dump_type_store); - -static struct kset *dump_kset; - -/* - * Shutdown actions section - */ - -static struct kset *shutdown_actions_kset; - -/* on panic */ - -static ssize_t on_panic_show(struct kobject *kobj, - struct kobj_attribute *attr, char *page) -{ - return sprintf(page, "%s\n", shutdown_action_str(on_panic_action)); -} - -static ssize_t on_panic_store(struct kobject *kobj, - struct kobj_attribute *attr, - const char *buf, size_t len) -{ - if (strncmp(buf, SHUTDOWN_REIPL_STR, strlen(SHUTDOWN_REIPL_STR)) == 0) - on_panic_action = SHUTDOWN_REIPL; - else if (strncmp(buf, SHUTDOWN_DUMP_STR, - strlen(SHUTDOWN_DUMP_STR)) == 0) - on_panic_action = SHUTDOWN_DUMP; - else if (strncmp(buf, SHUTDOWN_STOP_STR, - strlen(SHUTDOWN_STOP_STR)) == 0) - on_panic_action = SHUTDOWN_STOP; - else - return -EINVAL; - - return len; -} - -static struct kobj_attribute on_panic_attr = - __ATTR(on_panic, 0644, on_panic_show, on_panic_store); - -void do_reipl(void) +void reipl_run(struct shutdown_trigger *trigger) { struct ccw_dev_id devid; static char buf[100]; @@ -787,119 +701,27 @@ void do_reipl(void) default: break; } - signal_processor(smp_processor_id(), sigp_stop_and_store_status); } -static void do_dump(void) +static void __init reipl_probe(void) { - struct ccw_dev_id devid; - static char buf[100]; + void *buffer; - switch (dump_method) { - case DUMP_METHOD_CCW_CIO: - smp_send_stop(); - devid.devno = dump_block_ccw->ipl_info.ccw.devno; - devid.ssid = 0; - reipl_ccw_dev(&devid); - break; - case DUMP_METHOD_CCW_VM: - smp_send_stop(); - sprintf(buf, "STORE STATUS"); - __cpcmd(buf, NULL, 0, NULL); - sprintf(buf, "IPL %X", dump_block_ccw->ipl_info.ccw.devno); - __cpcmd(buf, NULL, 0, NULL); - break; - case DUMP_METHOD_CCW_DIAG: - diag308(DIAG308_SET, dump_block_ccw); - diag308(DIAG308_DUMP, NULL); - break; - case DUMP_METHOD_FCP_DIAG: - diag308(DIAG308_SET, dump_block_fcp); - diag308(DIAG308_DUMP, NULL); - break; - case DUMP_METHOD_NONE: - default: + buffer = (void *) get_zeroed_page(GFP_KERNEL); + if (!buffer) return; - } - printk(KERN_EMERG "Dump failed!\n"); + if (diag308(DIAG308_STORE, buffer) == DIAG308_RC_OK) + diag308_set_works = 1; + free_page((unsigned long)buffer); } -/* init functions */ - -static int __init ipl_register_fcp_files(void) +static int __init reipl_nss_init(void) { int rc; - rc = sysfs_create_group(&ipl_kset->kobj, - &ipl_fcp_attr_group); - if (rc) - goto out; - rc = sysfs_create_bin_file(&ipl_kset->kobj, - &ipl_parameter_attr); - if (rc) - goto out_ipl_parm; - rc = sysfs_create_bin_file(&ipl_kset->kobj, - &ipl_scp_data_attr); - if (!rc) - goto out; - - sysfs_remove_bin_file(&ipl_kset->kobj, &ipl_parameter_attr); - -out_ipl_parm: - sysfs_remove_group(&ipl_kset->kobj, &ipl_fcp_attr_group); -out: - return rc; -} - -static int __init ipl_init(void) -{ - int rc; - - ipl_kset = kset_create_and_add("ipl", NULL, firmware_kobj); - if (!ipl_kset) - return -ENOMEM; - switch (ipl_info.type) { - case IPL_TYPE_CCW: - rc = sysfs_create_group(&ipl_kset->kobj, - &ipl_ccw_attr_group); - break; - case IPL_TYPE_FCP: - case IPL_TYPE_FCP_DUMP: - rc = ipl_register_fcp_files(); - break; - case IPL_TYPE_NSS: - rc = sysfs_create_group(&ipl_kset->kobj, - &ipl_nss_attr_group); - break; - default: - rc = sysfs_create_group(&ipl_kset->kobj, - &ipl_unknown_attr_group); - break; - } - if (rc) - kset_unregister(ipl_kset); - return rc; -} - -static void __init reipl_probe(void) -{ - void *buffer; - - buffer = (void *) get_zeroed_page(GFP_KERNEL); - if (!buffer) - return; - if (diag308(DIAG308_STORE, buffer) == DIAG308_RC_OK) - diag308_set_works = 1; - free_page((unsigned long)buffer); -} - -static int __init reipl_nss_init(void) -{ - int rc; - - if (!MACHINE_IS_VM) - return 0; - rc = sysfs_create_group(&reipl_kset->kobj, &reipl_nss_attr_group); + if (!MACHINE_IS_VM) + return 0; + rc = sysfs_create_group(&reipl_kset->kobj, &reipl_nss_attr_group); if (rc) return rc; strncpy(reipl_nss_name, kernel_nss_name, NSS_NAME_SIZE + 1); @@ -970,7 +792,7 @@ static int __init reipl_fcp_init(void) return 0; } -static int __init reipl_init(void) +static int reipl_init(void) { int rc; @@ -997,6 +819,138 @@ static int __init reipl_init(void) return 0; } +static struct shutdown_action reipl_action = {SHUTDOWN_ACTION_REIPL_STR, + reipl_run, reipl_init}; + +/* + * dump shutdown action: Dump Linux on shutdown. + */ + +/* FCP dump device attributes */ + +DEFINE_IPL_ATTR_RW(dump_fcp, wwpn, "0x%016llx\n", "%016llx\n", + dump_block_fcp->ipl_info.fcp.wwpn); +DEFINE_IPL_ATTR_RW(dump_fcp, lun, "0x%016llx\n", "%016llx\n", + dump_block_fcp->ipl_info.fcp.lun); +DEFINE_IPL_ATTR_RW(dump_fcp, bootprog, "%lld\n", "%lld\n", + dump_block_fcp->ipl_info.fcp.bootprog); +DEFINE_IPL_ATTR_RW(dump_fcp, br_lba, "%lld\n", "%lld\n", + dump_block_fcp->ipl_info.fcp.br_lba); +DEFINE_IPL_ATTR_RW(dump_fcp, device, "0.0.%04llx\n", "0.0.%llx\n", + dump_block_fcp->ipl_info.fcp.devno); + +static struct attribute *dump_fcp_attrs[] = { + &sys_dump_fcp_device_attr.attr, + &sys_dump_fcp_wwpn_attr.attr, + &sys_dump_fcp_lun_attr.attr, + &sys_dump_fcp_bootprog_attr.attr, + &sys_dump_fcp_br_lba_attr.attr, + NULL, +}; + +static struct attribute_group dump_fcp_attr_group = { + .name = IPL_FCP_STR, + .attrs = dump_fcp_attrs, +}; + +/* CCW dump device attributes */ + +DEFINE_IPL_ATTR_RW(dump_ccw, device, "0.0.%04llx\n", "0.0.%llx\n", + dump_block_ccw->ipl_info.ccw.devno); + +static struct attribute *dump_ccw_attrs[] = { + &sys_dump_ccw_device_attr.attr, + NULL, +}; + +static struct attribute_group dump_ccw_attr_group = { + .name = IPL_CCW_STR, + .attrs = dump_ccw_attrs, +}; + +/* dump type */ + +static int dump_set_type(enum dump_type type) +{ + if (!(dump_capabilities & type)) + return -EINVAL; + switch (type) { + case DUMP_TYPE_CCW: + if (MACHINE_IS_VM) + dump_method = DUMP_METHOD_CCW_VM; + else + dump_method = DUMP_METHOD_CCW_CIO; + break; + case DUMP_TYPE_FCP: + dump_method = DUMP_METHOD_FCP_DIAG; + break; + default: + dump_method = DUMP_METHOD_NONE; + } + dump_type = type; + return 0; +} + +static ssize_t dump_type_show(struct kobject *kobj, + struct kobj_attribute *attr, char *page) +{ + return sprintf(page, "%s\n", dump_type_str(dump_type)); +} + +static ssize_t dump_type_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t len) +{ + int rc = -EINVAL; + + if (strncmp(buf, DUMP_NONE_STR, strlen(DUMP_NONE_STR)) == 0) + rc = dump_set_type(DUMP_TYPE_NONE); + else if (strncmp(buf, DUMP_CCW_STR, strlen(DUMP_CCW_STR)) == 0) + rc = dump_set_type(DUMP_TYPE_CCW); + else if (strncmp(buf, DUMP_FCP_STR, strlen(DUMP_FCP_STR)) == 0) + rc = dump_set_type(DUMP_TYPE_FCP); + return (rc != 0) ? rc : len; +} + +static struct kobj_attribute dump_type_attr = + __ATTR(dump_type, 0644, dump_type_show, dump_type_store); + +static struct kset *dump_kset; + +static void dump_run(struct shutdown_trigger *trigger) +{ + struct ccw_dev_id devid; + static char buf[100]; + + switch (dump_method) { + case DUMP_METHOD_CCW_CIO: + smp_send_stop(); + devid.devno = dump_block_ccw->ipl_info.ccw.devno; + devid.ssid = 0; + reipl_ccw_dev(&devid); + break; + case DUMP_METHOD_CCW_VM: + smp_send_stop(); + sprintf(buf, "STORE STATUS"); + __cpcmd(buf, NULL, 0, NULL); + sprintf(buf, "IPL %X", dump_block_ccw->ipl_info.ccw.devno); + __cpcmd(buf, NULL, 0, NULL); + break; + case DUMP_METHOD_CCW_DIAG: + diag308(DIAG308_SET, dump_block_ccw); + diag308(DIAG308_DUMP, NULL); + break; + case DUMP_METHOD_FCP_DIAG: + diag308(DIAG308_SET, dump_block_fcp); + diag308(DIAG308_DUMP, NULL); + break; + case DUMP_METHOD_NONE: + default: + return; + } + printk(KERN_EMERG "Dump failed!\n"); +} + static int __init dump_ccw_init(void) { int rc; @@ -1042,31 +996,14 @@ static int __init dump_fcp_init(void) return 0; } -#define SHUTDOWN_ON_PANIC_PRIO 0 - -static int shutdown_on_panic_notify(struct notifier_block *self, - unsigned long event, void *data) -{ - if (on_panic_action == SHUTDOWN_DUMP) - do_dump(); - else if (on_panic_action == SHUTDOWN_REIPL) - do_reipl(); - return NOTIFY_OK; -} - -static struct notifier_block shutdown_on_panic_nb = { - .notifier_call = shutdown_on_panic_notify, - .priority = SHUTDOWN_ON_PANIC_PRIO -}; - -static int __init dump_init(void) +static int dump_init(void) { int rc; dump_kset = kset_create_and_add("dump", NULL, firmware_kobj); if (!dump_kset) return -ENOMEM; - rc = sysfs_create_file(&dump_kset->kobj, &dump_type_attr); + rc = sysfs_create_file(&dump_kset->kobj, &dump_type_attr.attr); if (rc) { kset_unregister(dump_kset); return rc; @@ -1081,47 +1018,376 @@ static int __init dump_init(void) return 0; } -static int __init shutdown_actions_init(void) +static struct shutdown_action dump_action = {SHUTDOWN_ACTION_DUMP_STR, + dump_run, dump_init}; + +/* + * vmcmd shutdown action: Trigger vm command on shutdown. + */ + +static char vmcmd_on_reboot[128]; +static char vmcmd_on_panic[128]; +static char vmcmd_on_halt[128]; +static char vmcmd_on_poff[128]; + +DEFINE_IPL_ATTR_STR_RW(vmcmd, on_reboot, "%s\n", "%s\n", vmcmd_on_reboot); +DEFINE_IPL_ATTR_STR_RW(vmcmd, on_panic, "%s\n", "%s\n", vmcmd_on_panic); +DEFINE_IPL_ATTR_STR_RW(vmcmd, on_halt, "%s\n", "%s\n", vmcmd_on_halt); +DEFINE_IPL_ATTR_STR_RW(vmcmd, on_poff, "%s\n", "%s\n", vmcmd_on_poff); + +static struct attribute *vmcmd_attrs[] = { + &sys_vmcmd_on_reboot_attr.attr, + &sys_vmcmd_on_panic_attr.attr, + &sys_vmcmd_on_halt_attr.attr, + &sys_vmcmd_on_poff_attr.attr, + NULL, +}; + +static struct attribute_group vmcmd_attr_group = { + .attrs = vmcmd_attrs, +}; + +static struct kset *vmcmd_kset; + +static void vmcmd_run(struct shutdown_trigger *trigger) { - int rc; + char *cmd, *next_cmd; + + if (strcmp(trigger->name, ON_REIPL_STR) == 0) + cmd = vmcmd_on_reboot; + else if (strcmp(trigger->name, ON_PANIC_STR) == 0) + cmd = vmcmd_on_panic; + else if (strcmp(trigger->name, ON_HALT_STR) == 0) + cmd = vmcmd_on_halt; + else if (strcmp(trigger->name, ON_POFF_STR) == 0) + cmd = vmcmd_on_poff; + else + return; + + if (strlen(cmd) == 0) + return; + do { + next_cmd = strchr(cmd, '\n'); + if (next_cmd) { + next_cmd[0] = 0; + next_cmd += 1; + } + __cpcmd(cmd, NULL, 0, NULL); + cmd = next_cmd; + } while (cmd != NULL); +} + +static int vmcmd_init(void) +{ + if (!MACHINE_IS_VM) + return -ENOTSUPP; + vmcmd_kset = kset_create_and_add("vmcmd", NULL, firmware_kobj); + if (!vmcmd_kset) + return -ENOMEM; + return sysfs_create_group(&vmcmd_kset->kobj, &vmcmd_attr_group); +} + +static struct shutdown_action vmcmd_action = {SHUTDOWN_ACTION_VMCMD_STR, + vmcmd_run, vmcmd_init}; + +/* + * stop shutdown action: Stop Linux on shutdown. + */ + +static void stop_run(struct shutdown_trigger *trigger) +{ + signal_processor(smp_processor_id(), sigp_stop_and_store_status); + for (;;); +} + +static struct shutdown_action stop_action = {SHUTDOWN_ACTION_STOP_STR, + stop_run, NULL}; + +/* action list */ + +static struct shutdown_action *shutdown_actions_list[] = { + &ipl_action, &reipl_action, &dump_action, &vmcmd_action, &stop_action}; +#define SHUTDOWN_ACTIONS_COUNT (sizeof(shutdown_actions_list) / sizeof(void *)) + +/* + * Trigger section + */ + +static struct kset *shutdown_actions_kset; + +static int set_trigger(const char *buf, struct shutdown_trigger *trigger, + size_t len) +{ + int i; + for (i = 0; i < SHUTDOWN_ACTIONS_COUNT; i++) { + if (!shutdown_actions_list[i]) + continue; + if (strncmp(buf, shutdown_actions_list[i]->name, + strlen(shutdown_actions_list[i]->name)) == 0) { + trigger->action = shutdown_actions_list[i]; + return len; + } + } + return -EINVAL; +} + +/* on reipl */ + +static struct shutdown_trigger on_reboot_trigger = {ON_REIPL_STR, + &reipl_action}; + +static ssize_t on_reboot_show(struct kobject *kobj, + struct kobj_attribute *attr, char *page) +{ + return sprintf(page, "%s\n", on_reboot_trigger.action->name); +} + +static ssize_t on_reboot_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t len) +{ + return set_trigger(buf, &on_reboot_trigger, len); +} + +static struct kobj_attribute on_reboot_attr = + __ATTR(on_reboot, 0644, on_reboot_show, on_reboot_store); + +static void do_machine_restart(char *__unused) +{ + smp_send_stop(); + on_reboot_trigger.action->fn(&on_reboot_trigger); + reipl_run(NULL); +} +void (*_machine_restart)(char *command) = do_machine_restart; + +/* on panic */ + +static struct shutdown_trigger on_panic_trigger = {ON_PANIC_STR, &stop_action}; + +static ssize_t on_panic_show(struct kobject *kobj, + struct kobj_attribute *attr, char *page) +{ + return sprintf(page, "%s\n", on_panic_trigger.action->name); +} + +static ssize_t on_panic_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t len) +{ + return set_trigger(buf, &on_panic_trigger, len); +} + +static struct kobj_attribute on_panic_attr = + __ATTR(on_panic, 0644, on_panic_show, on_panic_store); + +static void do_panic(void) +{ + on_panic_trigger.action->fn(&on_panic_trigger); + stop_run(&on_panic_trigger); +} + +/* on halt */ + +static struct shutdown_trigger on_halt_trigger = {ON_HALT_STR, &stop_action}; + +static ssize_t on_halt_show(struct kobject *kobj, + struct kobj_attribute *attr, char *page) +{ + return sprintf(page, "%s\n", on_halt_trigger.action->name); +} + +static ssize_t on_halt_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t len) +{ + return set_trigger(buf, &on_halt_trigger, len); +} + +static struct kobj_attribute on_halt_attr = + __ATTR(on_halt, 0644, on_halt_show, on_halt_store); + +static void do_machine_halt(void) +{ + smp_send_stop(); + on_halt_trigger.action->fn(&on_halt_trigger); + stop_run(&on_halt_trigger); +} +void (*_machine_halt)(void) = do_machine_halt; + +/* on power off */ + +static struct shutdown_trigger on_poff_trigger = {ON_POFF_STR, &stop_action}; + +static ssize_t on_poff_show(struct kobject *kobj, + struct kobj_attribute *attr, char *page) +{ + return sprintf(page, "%s\n", on_poff_trigger.action->name); +} + +static ssize_t on_poff_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t len) +{ + return set_trigger(buf, &on_poff_trigger, len); +} + +static struct kobj_attribute on_poff_attr = + __ATTR(on_poff, 0644, on_poff_show, on_poff_store); + + +static void do_machine_power_off(void) +{ + smp_send_stop(); + on_poff_trigger.action->fn(&on_poff_trigger); + stop_run(&on_poff_trigger); +} +void (*_machine_power_off)(void) = do_machine_power_off; + +static void __init shutdown_triggers_init(void) +{ shutdown_actions_kset = kset_create_and_add("shutdown_actions", NULL, firmware_kobj); if (!shutdown_actions_kset) - return -ENOMEM; - rc = sysfs_create_file(&shutdown_actions_kset->kobj, &on_panic_attr); - if (rc) { - kset_unregister(shutdown_actions_kset); - return rc; + goto fail; + if (sysfs_create_file(&shutdown_actions_kset->kobj, + &on_reboot_attr.attr)) + goto fail; + if (sysfs_create_file(&shutdown_actions_kset->kobj, + &on_panic_attr.attr)) + goto fail; + if (sysfs_create_file(&shutdown_actions_kset->kobj, + &on_halt_attr.attr)) + goto fail; + if (sysfs_create_file(&shutdown_actions_kset->kobj, + &on_poff_attr.attr)) + goto fail; + + return; +fail: + panic("shutdown_triggers_init failed\n"); +} + +static void __init shutdown_actions_init(void) +{ + int i; + + for (i = 0; i < SHUTDOWN_ACTIONS_COUNT; i++) { + if (!shutdown_actions_list[i]->init) + continue; + if (shutdown_actions_list[i]->init()) + shutdown_actions_list[i] = NULL; } - atomic_notifier_chain_register(&panic_notifier_list, - &shutdown_on_panic_nb); - return 0; } static int __init s390_ipl_init(void) { - int rc; - - sclp_get_ipl_info(&sclp_ipl_info); reipl_probe(); - rc = ipl_init(); - if (rc) - return rc; - rc = reipl_init(); - if (rc) - return rc; - rc = dump_init(); - if (rc) - return rc; - rc = shutdown_actions_init(); - if (rc) - return rc; + shutdown_actions_init(); + shutdown_triggers_init(); return 0; } __initcall(s390_ipl_init); +static void __init strncpy_skip_quote(char *dst, char *src, int n) +{ + int sx, dx; + + dx = 0; + for (sx = 0; src[sx] != 0; sx++) { + if (src[sx] == '"') + continue; + dst[dx++] = src[sx]; + if (dx >= n) + break; + } +} + +static int __init vmcmd_on_reboot_setup(char *str) +{ + if (!MACHINE_IS_VM) + return 1; + strncpy_skip_quote(vmcmd_on_reboot, str, 127); + vmcmd_on_reboot[127] = 0; + on_reboot_trigger.action = &vmcmd_action; + return 1; +} +__setup("vmreboot=", vmcmd_on_reboot_setup); + +static int __init vmcmd_on_panic_setup(char *str) +{ + if (!MACHINE_IS_VM) + return 1; + strncpy_skip_quote(vmcmd_on_panic, str, 127); + vmcmd_on_panic[127] = 0; + on_panic_trigger.action = &vmcmd_action; + return 1; +} +__setup("vmpanic=", vmcmd_on_panic_setup); + +static int __init vmcmd_on_halt_setup(char *str) +{ + if (!MACHINE_IS_VM) + return 1; + strncpy_skip_quote(vmcmd_on_halt, str, 127); + vmcmd_on_halt[127] = 0; + on_halt_trigger.action = &vmcmd_action; + return 1; +} +__setup("vmhalt=", vmcmd_on_halt_setup); + +static int __init vmcmd_on_poff_setup(char *str) +{ + if (!MACHINE_IS_VM) + return 1; + strncpy_skip_quote(vmcmd_on_poff, str, 127); + vmcmd_on_poff[127] = 0; + on_poff_trigger.action = &vmcmd_action; + return 1; +} +__setup("vmpoff=", vmcmd_on_poff_setup); + +static int on_panic_notify(struct notifier_block *self, + unsigned long event, void *data) +{ + do_panic(); + return NOTIFY_OK; +} + +static struct notifier_block on_panic_nb = { + .notifier_call = on_panic_notify, + .priority = 0, +}; + +void __init setup_ipl(void) +{ + ipl_info.type = get_ipl_type(); + switch (ipl_info.type) { + case IPL_TYPE_CCW: + ipl_info.data.ccw.dev_id.devno = ipl_devno; + ipl_info.data.ccw.dev_id.ssid = 0; + break; + case IPL_TYPE_FCP: + case IPL_TYPE_FCP_DUMP: + ipl_info.data.fcp.dev_id.devno = + IPL_PARMBLOCK_START->ipl_info.fcp.devno; + ipl_info.data.fcp.dev_id.ssid = 0; + ipl_info.data.fcp.wwpn = IPL_PARMBLOCK_START->ipl_info.fcp.wwpn; + ipl_info.data.fcp.lun = IPL_PARMBLOCK_START->ipl_info.fcp.lun; + break; + case IPL_TYPE_NSS: + strncpy(ipl_info.data.nss.name, kernel_nss_name, + sizeof(ipl_info.data.nss.name)); + break; + case IPL_TYPE_UNKNOWN: + default: + /* We have no info to copy */ + break; + } + atomic_notifier_chain_register(&panic_notifier_list, &on_panic_nb); +} + void __init ipl_save_parameters(void) { struct cio_iplinfo iplinfo; @@ -1202,3 +1468,4 @@ void s390_reset_system(void) do_reset_calls(); } + diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index cbdf3fb05e81..fcebf645618a 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -125,75 +125,6 @@ void __cpuinit cpu_init(void) enter_lazy_tlb(&init_mm, current); } -/* - * VM halt and poweroff setup routines - */ -char vmhalt_cmd[128] = ""; -char vmpoff_cmd[128] = ""; -static char vmpanic_cmd[128] = ""; - -static void strncpy_skip_quote(char *dst, char *src, int n) -{ - int sx, dx; - - dx = 0; - for (sx = 0; src[sx] != 0; sx++) { - if (src[sx] == '"') continue; - dst[dx++] = src[sx]; - if (dx >= n) break; - } -} - -static int __init vmhalt_setup(char *str) -{ - strncpy_skip_quote(vmhalt_cmd, str, 127); - vmhalt_cmd[127] = 0; - return 1; -} - -__setup("vmhalt=", vmhalt_setup); - -static int __init vmpoff_setup(char *str) -{ - strncpy_skip_quote(vmpoff_cmd, str, 127); - vmpoff_cmd[127] = 0; - return 1; -} - -__setup("vmpoff=", vmpoff_setup); - -static int vmpanic_notify(struct notifier_block *self, unsigned long event, - void *data) -{ - if (MACHINE_IS_VM && strlen(vmpanic_cmd) > 0) - cpcmd(vmpanic_cmd, NULL, 0, NULL); - - return NOTIFY_OK; -} - -#define PANIC_PRI_VMPANIC 0 - -static struct notifier_block vmpanic_nb = { - .notifier_call = vmpanic_notify, - .priority = PANIC_PRI_VMPANIC -}; - -static int __init vmpanic_setup(char *str) -{ - static int register_done __initdata = 0; - - strncpy_skip_quote(vmpanic_cmd, str, 127); - vmpanic_cmd[127] = 0; - if (!register_done) { - register_done = 1; - atomic_notifier_chain_register(&panic_notifier_list, - &vmpanic_nb); - } - return 1; -} - -__setup("vmpanic=", vmpanic_setup); - /* * condev= and conmode= setup parameter. */ @@ -308,38 +239,6 @@ static void __init setup_zfcpdump(unsigned int console_devno) static inline void setup_zfcpdump(unsigned int console_devno) {} #endif /* CONFIG_ZFCPDUMP */ -#ifdef CONFIG_SMP -void (*_machine_restart)(char *command) = machine_restart_smp; -void (*_machine_halt)(void) = machine_halt_smp; -void (*_machine_power_off)(void) = machine_power_off_smp; -#else -/* - * Reboot, halt and power_off routines for non SMP. - */ -static void do_machine_restart_nonsmp(char * __unused) -{ - do_reipl(); -} - -static void do_machine_halt_nonsmp(void) -{ - if (MACHINE_IS_VM && strlen(vmhalt_cmd) > 0) - __cpcmd(vmhalt_cmd, NULL, 0, NULL); - signal_processor(smp_processor_id(), sigp_stop_and_store_status); -} - -static void do_machine_power_off_nonsmp(void) -{ - if (MACHINE_IS_VM && strlen(vmpoff_cmd) > 0) - __cpcmd(vmpoff_cmd, NULL, 0, NULL); - signal_processor(smp_processor_id(), sigp_stop_and_store_status); -} - -void (*_machine_restart)(char *command) = do_machine_restart_nonsmp; -void (*_machine_halt)(void) = do_machine_halt_nonsmp; -void (*_machine_power_off)(void) = do_machine_power_off_nonsmp; -#endif - /* * Reboot, halt and power_off stubs. They just call _machine_restart, * _machine_halt or _machine_power_off. @@ -913,7 +812,7 @@ setup_arch(char **cmdline_p) parse_early_param(); - setup_ipl_info(); + setup_ipl(); setup_memory_end(); setup_addressing_mode(); setup_memory(); diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 320e4e97bf52..d300a7fdf711 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -233,33 +233,6 @@ void smp_send_stop(void) } } -/* - * Reboot, halt and power_off routines for SMP. - */ -void machine_restart_smp(char *__unused) -{ - smp_send_stop(); - do_reipl(); -} - -void machine_halt_smp(void) -{ - smp_send_stop(); - if (MACHINE_IS_VM && strlen(vmhalt_cmd) > 0) - __cpcmd(vmhalt_cmd, NULL, 0, NULL); - signal_processor(smp_processor_id(), sigp_stop_and_store_status); - for (;;); -} - -void machine_power_off_smp(void) -{ - smp_send_stop(); - if (MACHINE_IS_VM && strlen(vmpoff_cmd) > 0) - __cpcmd(vmpoff_cmd, NULL, 0, NULL); - signal_processor(smp_processor_id(), sigp_stop_and_store_status); - for (;;); -} - /* * This is the main routine where commands issued by other * cpus are handled. diff --git a/include/asm-s390/ipl.h b/include/asm-s390/ipl.h index 2c40fd3a137f..d0dcc9c5f7c3 100644 --- a/include/asm-s390/ipl.h +++ b/include/asm-s390/ipl.h @@ -83,6 +83,8 @@ extern u32 dump_prefix_page; extern unsigned int zfcpdump_prefix_array[]; extern void do_reipl(void); +extern void do_halt(void); +extern void do_poff(void); extern void ipl_save_parameters(void); enum { @@ -118,7 +120,7 @@ struct ipl_info }; extern struct ipl_info ipl_info; -extern void setup_ipl_info(void); +extern void setup_ipl(void); /* * DIAG 308 support -- cgit v1.2.3-59-g8ed1b From c654749777e8624187b53fbb94cea91a7bf74347 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Sat, 26 Jan 2008 14:11:12 +0100 Subject: [S390] Load disabled wait psw instead of stopping cpu on halt. Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/ipl.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index d73aff63725f..e3b9c6cc3aec 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -1096,8 +1096,12 @@ static struct shutdown_action vmcmd_action = {SHUTDOWN_ACTION_VMCMD_STR, static void stop_run(struct shutdown_trigger *trigger) { - signal_processor(smp_processor_id(), sigp_stop_and_store_status); - for (;;); + if (strcmp(trigger->name, ON_PANIC_STR) == 0) + disabled_wait((unsigned long) __builtin_return_address(0)); + else { + signal_processor(smp_processor_id(), sigp_stop); + for (;;); + } } static struct shutdown_action stop_action = {SHUTDOWN_ACTION_STOP_STR, -- cgit v1.2.3-59-g8ed1b From c11ca97ee9d2ed593ab7b5523def7787b46f398f Mon Sep 17 00:00:00 2001 From: Denis Cheng Date: Sat, 26 Jan 2008 14:11:13 +0100 Subject: [S390] use LIST_HEAD instead of LIST_HEAD_INIT single list_head variable initialized with LIST_HEAD_INIT could almost always can be replaced with LIST_HEAD declaration, this shrinks the code and looks better. Signed-off-by: Denis Cheng Signed-off-by: Martin Schwidefsky --- arch/s390/mm/extmem.c | 2 +- drivers/s390/block/dcssblk.c | 2 +- drivers/s390/char/raw3270.c | 4 ++-- drivers/s390/char/tape_core.c | 2 +- drivers/s390/net/netiucv.c | 3 +-- drivers/s390/net/smsgiucv.c | 2 +- 6 files changed, 7 insertions(+), 8 deletions(-) diff --git a/arch/s390/mm/extmem.c b/arch/s390/mm/extmem.c index 394980b05e6f..880b0ebf894b 100644 --- a/arch/s390/mm/extmem.c +++ b/arch/s390/mm/extmem.c @@ -83,7 +83,7 @@ struct dcss_segment { }; static DEFINE_MUTEX(dcss_lock); -static struct list_head dcss_list = LIST_HEAD_INIT(dcss_list); +static LIST_HEAD(dcss_list); static char *segtype_string[] = { "SW", "EW", "SR", "ER", "SN", "EN", "SC", "EW/EN-MIXED" }; diff --git a/drivers/s390/block/dcssblk.c b/drivers/s390/block/dcssblk.c index 15a5789b7734..7779bfce1c31 100644 --- a/drivers/s390/block/dcssblk.c +++ b/drivers/s390/block/dcssblk.c @@ -82,7 +82,7 @@ struct dcssblk_dev_info { struct request_queue *dcssblk_queue; }; -static struct list_head dcssblk_devices = LIST_HEAD_INIT(dcssblk_devices); +static LIST_HEAD(dcssblk_devices); static struct rw_semaphore dcssblk_devices_sem; /* diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c index 8d1c64a24dec..0d98f1ff2edd 100644 --- a/drivers/s390/char/raw3270.c +++ b/drivers/s390/char/raw3270.c @@ -66,7 +66,7 @@ struct raw3270 { static DEFINE_MUTEX(raw3270_mutex); /* List of 3270 devices. */ -static struct list_head raw3270_devices = LIST_HEAD_INIT(raw3270_devices); +static LIST_HEAD(raw3270_devices); /* * Flag to indicate if the driver has been registered. Some operations @@ -1210,7 +1210,7 @@ struct raw3270_notifier { void (*notifier)(int, int); }; -static struct list_head raw3270_notifier = LIST_HEAD_INIT(raw3270_notifier); +static LIST_HEAD(raw3270_notifier); int raw3270_register_notifier(void (*notifier)(int, int)) { diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c index 2fae6338ee1c..7ad8cf157641 100644 --- a/drivers/s390/char/tape_core.c +++ b/drivers/s390/char/tape_core.c @@ -37,7 +37,7 @@ static void tape_long_busy_timeout(unsigned long data); * we can assign the devices to minor numbers of the same major * The list is protected by the rwlock */ -static struct list_head tape_device_list = LIST_HEAD_INIT(tape_device_list); +static LIST_HEAD(tape_device_list); static DEFINE_RWLOCK(tape_device_lock); /* diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c index d6e93f15440e..f3d893cfe61d 100644 --- a/drivers/s390/net/netiucv.c +++ b/drivers/s390/net/netiucv.c @@ -198,8 +198,7 @@ struct iucv_connection { /** * Linked list of all connection structs. */ -static struct list_head iucv_connection_list = - LIST_HEAD_INIT(iucv_connection_list); +static LIST_HEAD(iucv_connection_list); static DEFINE_RWLOCK(iucv_connection_rwlock); /** diff --git a/drivers/s390/net/smsgiucv.c b/drivers/s390/net/smsgiucv.c index 47bb47b48581..8735a415a116 100644 --- a/drivers/s390/net/smsgiucv.c +++ b/drivers/s390/net/smsgiucv.c @@ -42,7 +42,7 @@ MODULE_DESCRIPTION ("Linux for S/390 IUCV special message driver"); static struct iucv_path *smsg_path; static DEFINE_SPINLOCK(smsg_list_lock); -static struct list_head smsg_list = LIST_HEAD_INIT(smsg_list); +static LIST_HEAD(smsg_list); static int smsg_path_pending(struct iucv_path *, u8 ipvmid[8], u8 ipuser[16]); static void smsg_message_pending(struct iucv_path *, struct iucv_message *); -- cgit v1.2.3-59-g8ed1b From 1cb6bb4bbdfd7b6bbdd148c4a34c02066339806d Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Sat, 26 Jan 2008 14:11:14 +0100 Subject: [S390] Allocate and free cpu lowcores and stacks when needed/possible. No need to preallocate the per cpu lowcores and stacks. Savings are 28-32k per offline cpu. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/smp.c | 106 +++++++++++++++++++++++++++++++++---------------- 1 file changed, 72 insertions(+), 34 deletions(-) diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index d300a7fdf711..040406dbe9aa 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -589,8 +589,72 @@ static void __init smp_create_idle(unsigned int cpu) spin_lock_init(&(&per_cpu(s390_idle, cpu))->lock); } +static int __cpuinit smp_alloc_lowcore(int cpu) +{ + unsigned long async_stack, panic_stack; + struct _lowcore *lowcore; + int lc_order; + + lc_order = sizeof(long) == 8 ? 1 : 0; + lowcore = (void *) __get_free_pages(GFP_KERNEL | GFP_DMA, lc_order); + if (!lowcore) + return -ENOMEM; + async_stack = __get_free_pages(GFP_KERNEL, ASYNC_ORDER); + if (!async_stack) + goto out_async_stack; + panic_stack = __get_free_page(GFP_KERNEL); + if (!panic_stack) + goto out_panic_stack; + + *lowcore = S390_lowcore; + lowcore->async_stack = async_stack + ASYNC_SIZE; + lowcore->panic_stack = panic_stack + PAGE_SIZE; + +#ifndef CONFIG_64BIT + if (MACHINE_HAS_IEEE) { + unsigned long save_area; + + save_area = get_zeroed_page(GFP_KERNEL); + if (!save_area) + goto out_save_area; + lowcore->extended_save_area_addr = (u32) save_area; + } +#endif + lowcore_ptr[cpu] = lowcore; + return 0; + +#ifndef CONFIG_64BIT +out_save_area: + free_page(panic_stack); +#endif +out_panic_stack: + free_pages(async_stack, ASYNC_ORDER); +out_async_stack: + free_pages((unsigned long) lowcore, lc_order); + return -ENOMEM; +} + +#ifdef CONFIG_HOTPLUG_CPU +static void smp_free_lowcore(int cpu) +{ + struct _lowcore *lowcore; + int lc_order; + + lc_order = sizeof(long) == 8 ? 1 : 0; + lowcore = lowcore_ptr[cpu]; +#ifndef CONFIG_64BIT + if (MACHINE_HAS_IEEE) + free_page((unsigned long) lowcore->extended_save_area_addr); +#endif + free_page(lowcore->panic_stack - PAGE_SIZE); + free_pages(lowcore->async_stack - ASYNC_SIZE, ASYNC_ORDER); + free_pages((unsigned long) lowcore, lc_order); + lowcore_ptr[cpu] = NULL; +} +#endif /* CONFIG_HOTPLUG_CPU */ + /* Upping and downing of CPUs */ -int __cpu_up(unsigned int cpu) +int __cpuinit __cpu_up(unsigned int cpu) { struct task_struct *idle; struct _lowcore *cpu_lowcore; @@ -599,6 +663,8 @@ int __cpu_up(unsigned int cpu) if (smp_cpu_state[cpu] != CPU_STATE_CONFIGURED) return -EIO; + if (smp_alloc_lowcore(cpu)) + return -ENOMEM; ccode = signal_processor_p((__u32)(unsigned long)(lowcore_ptr[cpu]), cpu, sigp_set_prefix); @@ -613,6 +679,7 @@ int __cpu_up(unsigned int cpu) cpu_lowcore = lowcore_ptr[cpu]; cpu_lowcore->kernel_stack = (unsigned long) task_stack_page(idle) + THREAD_SIZE; + cpu_lowcore->thread_info = (unsigned long) task_thread_info(idle); sf = (struct stack_frame *) (cpu_lowcore->kernel_stack - sizeof(struct pt_regs) - sizeof(struct stack_frame)); @@ -626,6 +693,8 @@ int __cpu_up(unsigned int cpu) cpu_lowcore->percpu_offset = __per_cpu_offset[cpu]; cpu_lowcore->current_task = (unsigned long) idle; cpu_lowcore->cpu_data.cpu_nr = cpu; + cpu_lowcore->softirq_pending = 0; + cpu_lowcore->ext_call_fast = 0; eieio(); while (signal_processor(cpu, sigp_restart) == sigp_busy) @@ -686,6 +755,7 @@ void __cpu_die(unsigned int cpu) /* Wait until target cpu is down */ while (!smp_cpu_not_running(cpu)) cpu_relax(); + smp_free_lowcore(cpu); printk(KERN_INFO "Processor %d spun down\n", cpu); } @@ -699,15 +769,9 @@ void cpu_die(void) #endif /* CONFIG_HOTPLUG_CPU */ -/* - * Cycle through the processors and setup structures. - */ - void __init smp_prepare_cpus(unsigned int max_cpus) { - unsigned long stack; unsigned int cpu; - int i; smp_detect_cpus(); @@ -715,35 +779,9 @@ void __init smp_prepare_cpus(unsigned int max_cpus) if (register_external_interrupt(0x1201, do_ext_call_interrupt) != 0) panic("Couldn't request external interrupt 0x1201"); memset(lowcore_ptr, 0, sizeof(lowcore_ptr)); - /* - * Initialize prefix pages and stacks for all possible cpus - */ print_cpu_info(&S390_lowcore.cpu_data); + smp_alloc_lowcore(smp_processor_id()); - for_each_possible_cpu(i) { - lowcore_ptr[i] = (struct _lowcore *) - __get_free_pages(GFP_KERNEL | GFP_DMA, - sizeof(void*) == 8 ? 1 : 0); - stack = __get_free_pages(GFP_KERNEL, ASYNC_ORDER); - if (!lowcore_ptr[i] || !stack) - panic("smp_boot_cpus failed to allocate memory\n"); - - *(lowcore_ptr[i]) = S390_lowcore; - lowcore_ptr[i]->async_stack = stack + ASYNC_SIZE; - stack = __get_free_pages(GFP_KERNEL, 0); - if (!stack) - panic("smp_boot_cpus failed to allocate memory\n"); - lowcore_ptr[i]->panic_stack = stack + PAGE_SIZE; -#ifndef CONFIG_64BIT - if (MACHINE_HAS_IEEE) { - lowcore_ptr[i]->extended_save_area_addr = - (__u32) __get_free_pages(GFP_KERNEL, 0); - if (!lowcore_ptr[i]->extended_save_area_addr) - panic("smp_boot_cpus failed to " - "allocate memory\n"); - } -#endif - } #ifndef CONFIG_64BIT if (MACHINE_HAS_IEEE) ctl_set_bit(14, 29); /* enable extended save area */ -- cgit v1.2.3-59-g8ed1b From d09293aee9fd0f9f291fa3a0e4ca5012f514d083 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Sat, 26 Jan 2008 14:11:15 +0100 Subject: [S390] Initialize sclp_ipl_info The sclp ipl information has not been initialized. Therefore the ipl loadparm and the "has_dump" flag have not been set correctly. Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/ipl.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index e3b9c6cc3aec..14bdde9def40 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -1287,6 +1287,7 @@ static void __init shutdown_actions_init(void) static int __init s390_ipl_init(void) { reipl_probe(); + sclp_get_ipl_info(&sclp_ipl_info); shutdown_actions_init(); shutdown_triggers_init(); return 0; -- cgit v1.2.3-59-g8ed1b From a2fd64d6aaf498756f700eb1d07818efee046733 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Sat, 26 Jan 2008 14:11:16 +0100 Subject: [S390] vmemmap: allocate struct pages before 1:1 mapping We have seen an oops in an OOM situation, where show_mem tried to access the struct page of a dcss segment. The vmemmap code has already created the 1:1 mapping but failed allocating the struct pages. In the OOM case, show_mem now walks the memory. It uses pfn_valid to detect if it may access the struct page. In the case described above, the mapping was established and pfn_valid returned true. As the struct pages were not allocated, the kernel oopsed. We have to ensure that we have created the struct pages, before we add a mapping pointing to the pages. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky --- arch/s390/mm/vmem.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c index 1fc99891c4eb..79d13a166a3d 100644 --- a/arch/s390/mm/vmem.c +++ b/arch/s390/mm/vmem.c @@ -236,10 +236,10 @@ static int vmem_add_mem(unsigned long start, unsigned long size) { int ret; - ret = vmem_add_range(start, size); + ret = vmem_add_mem_map(start, size); if (ret) return ret; - return vmem_add_mem_map(start, size); + return vmem_add_range(start, size); } /* -- cgit v1.2.3-59-g8ed1b From 48657d223d403af676696d313b421368f5e2208a Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Sat, 26 Jan 2008 14:11:17 +0100 Subject: [S390] Use diag308 subcodes 3 and 6 for reboot and dump when possible. This patch fixes a problem with the following scenario: 1. Linux booted from DASD "A" 2. Reboot from DASD "B" using "/sys/firmware/reipl/ccw/device" 3. Reboot DASD "B" Without this patch in step 3 on newer s390 systems under LPAR instead of DASD "B", DASD "A" will be booted. The reason is that in step 2 we use CCW reipl and in step 3 we use DIAG308 (subcode 3) reipl. DIAG308 does not notice the CCW reipl and still thinks that it has to reboot DASD "A". Before applying this fix, ensure to have MCF RJ9967101E or z9 GA3 base driver installed. Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/ipl.c | 14 ++++++++------ include/asm-s390/ipl.h | 4 ++++ 2 files changed, 12 insertions(+), 6 deletions(-) diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index 14bdde9def40..db28cca81fef 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -595,7 +595,9 @@ static int reipl_set_type(enum ipl_type type) switch(type) { case IPL_TYPE_CCW: - if (MACHINE_IS_VM) + if (diag308_set_works) + reipl_method = REIPL_METHOD_CCW_DIAG; + else if (MACHINE_IS_VM) reipl_method = REIPL_METHOD_CCW_VM; else reipl_method = REIPL_METHOD_CCW_CIO; @@ -659,8 +661,6 @@ void reipl_run(struct shutdown_trigger *trigger) switch (reipl_method) { case REIPL_METHOD_CCW_CIO: devid.devno = reipl_block_ccw->ipl_info.ccw.devno; - if (ipl_info.type == IPL_TYPE_CCW && devid.devno == ipl_devno) - diag308(DIAG308_IPL, NULL); devid.ssid = 0; reipl_ccw_dev(&devid); break; @@ -745,6 +745,7 @@ static int __init reipl_ccw_init(void) reipl_block_ccw->hdr.version = IPL_PARM_BLOCK_VERSION; reipl_block_ccw->hdr.blk0_len = IPL_PARM_BLK0_CCW_LEN; reipl_block_ccw->hdr.pbt = DIAG308_IPL_TYPE_CCW; + reipl_block_ccw->hdr.flags = DIAG308_FLAGS_LP_VALID; /* check if read scp info worked and set loadparm */ if (sclp_ipl_info.is_valid) memcpy(reipl_block_ccw->ipl_info.ccw.load_param, @@ -753,8 +754,7 @@ static int __init reipl_ccw_init(void) /* read scp info failed: set empty loadparm (EBCDIC blanks) */ memset(reipl_block_ccw->ipl_info.ccw.load_param, 0x40, LOADPARM_LEN); - /* FIXME: check for diag308_set_works when enabling diag ccw reipl */ - if (!MACHINE_IS_VM) + if (!MACHINE_IS_VM && !diag308_set_works) sys_reipl_ccw_loadparm_attr.attr.mode = S_IRUGO; if (ipl_info.type == IPL_TYPE_CCW) reipl_block_ccw->ipl_info.ccw.devno = ipl_devno; @@ -876,7 +876,9 @@ static int dump_set_type(enum dump_type type) return -EINVAL; switch (type) { case DUMP_TYPE_CCW: - if (MACHINE_IS_VM) + if (diag308_set_works) + dump_method = DUMP_METHOD_CCW_DIAG; + else if (MACHINE_IS_VM) dump_method = DUMP_METHOD_CCW_VM; else dump_method = DUMP_METHOD_CCW_CIO; diff --git a/include/asm-s390/ipl.h b/include/asm-s390/ipl.h index d0dcc9c5f7c3..c1b2e50392bb 100644 --- a/include/asm-s390/ipl.h +++ b/include/asm-s390/ipl.h @@ -143,6 +143,10 @@ enum diag308_opt { DIAG308_IPL_OPT_DUMP = 0x20, }; +enum diag308_flags { + DIAG308_FLAGS_LP_VALID = 0x80, +}; + enum diag308_rc { DIAG308_RC_OK = 1, }; -- cgit v1.2.3-59-g8ed1b From c2e3bbac72d5a954bf60c5fabeb7c82ec310035e Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sat, 26 Jan 2008 14:11:18 +0100 Subject: [S390] arch/s390/: Spelling fixes Signed-off-by: Joe Perches Signed-off-by: Martin Schwidefsky --- arch/s390/crypto/prng.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/crypto/prng.c b/arch/s390/crypto/prng.c index 8eb3a1aedc22..23ed094c52fe 100644 --- a/arch/s390/crypto/prng.c +++ b/arch/s390/crypto/prng.c @@ -90,7 +90,7 @@ static ssize_t prng_read(struct file *file, char __user *ubuf, size_t nbytes, int ret = 0; int tmp; - /* nbytes can be arbitrary long, we spilt it into chunks */ + /* nbytes can be arbitrary length, we split it into chunks */ while (nbytes) { /* same as in extract_entropy_user in random.c */ if (need_resched()) { -- cgit v1.2.3-59-g8ed1b From 5800266a7811afeba205e771dcad79023331011b Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sat, 26 Jan 2008 14:11:19 +0100 Subject: [S390] include/asm-s390/: Spelling fixes Signed-off-by: Joe Perches Signed-off-by: Martin Schwidefsky --- include/asm-s390/cio.h | 4 ++-- include/asm-s390/dasd.h | 2 +- include/asm-s390/qdio.h | 2 +- include/asm-s390/zcrypt.h | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-) diff --git a/include/asm-s390/cio.h b/include/asm-s390/cio.h index 2f08c16e44ad..123b557c3ff4 100644 --- a/include/asm-s390/cio.h +++ b/include/asm-s390/cio.h @@ -24,8 +24,8 @@ * @fmt: format * @pfch: prefetch * @isic: initial-status interruption control - * @alcc: adress-limit checking control - * @ssi: supress-suspended interruption + * @alcc: address-limit checking control + * @ssi: suppress-suspended interruption * @zcc: zero condition code * @ectl: extended control * @pno: path not operational diff --git a/include/asm-s390/dasd.h b/include/asm-s390/dasd.h index 604f68fa6f56..3f002e13d024 100644 --- a/include/asm-s390/dasd.h +++ b/include/asm-s390/dasd.h @@ -105,7 +105,7 @@ typedef struct dasd_information_t { } dasd_information_t; /* - * Read Subsystem Data - Perfomance Statistics + * Read Subsystem Data - Performance Statistics */ typedef struct dasd_rssd_perf_stats_t { unsigned char invalid:1; diff --git a/include/asm-s390/qdio.h b/include/asm-s390/qdio.h index 74db1dc10a7d..4b8ff55f680e 100644 --- a/include/asm-s390/qdio.h +++ b/include/asm-s390/qdio.h @@ -184,7 +184,7 @@ struct qdr { #endif /* QDIO_32_BIT */ unsigned long qiba; /* queue-information-block address */ unsigned int res8; /* reserved */ - unsigned int qkey : 4; /* queue-informatio-block key */ + unsigned int qkey : 4; /* queue-information-block key */ unsigned int res9 : 28; /* reserved */ /* union _qd {*/ /* why this? */ struct qdesfmt0 qdf0[126]; diff --git a/include/asm-s390/zcrypt.h b/include/asm-s390/zcrypt.h index a5dada617751..f228f1b86877 100644 --- a/include/asm-s390/zcrypt.h +++ b/include/asm-s390/zcrypt.h @@ -117,7 +117,7 @@ struct CPRBX { unsigned char padx004[16 - sizeof (char *)]; unsigned char * req_extb; /* request extension block 'addr'*/ unsigned char padx005[16 - sizeof (char *)]; - unsigned char * rpl_extb; /* reply extension block 'addres'*/ + unsigned char * rpl_extb; /* reply extension block 'address'*/ unsigned short ccp_rtcode; /* server return code */ unsigned short ccp_rscode; /* server reason code */ unsigned int mac_data_len; /* Mac Data Length */ -- cgit v1.2.3-59-g8ed1b From 5d67d164e6e2e7310cf4b682c418d70d59295eaf Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sat, 26 Jan 2008 14:11:20 +0100 Subject: [S390] drivers/s390/: Spelling fixes Signed-off-by: Joe Perches Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd_3990_erp.c | 2 +- drivers/s390/block/dasd_eckd.c | 2 +- drivers/s390/char/sclp_rw.c | 2 +- drivers/s390/char/tape_3590.c | 2 +- drivers/s390/scsi/zfcp_erp.c | 2 +- drivers/s390/scsi/zfcp_qdio.c | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/s390/block/dasd_3990_erp.c b/drivers/s390/block/dasd_3990_erp.c index 5b7385e430ea..c02f960eae15 100644 --- a/drivers/s390/block/dasd_3990_erp.c +++ b/drivers/s390/block/dasd_3990_erp.c @@ -2620,7 +2620,7 @@ dasd_3990_erp_handle_match_erp(struct dasd_ccw_req *erp_head, * DASD_3990_ERP_ACTION * * DESCRIPTION - * controll routine for 3990 erp actions. + * control routine for 3990 erp actions. * Has to be called with the queue lock (namely the s390_irq_lock) acquired. * * PARAMETER diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index 44adf8496bda..6038d9195e27 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -1542,7 +1542,7 @@ dasd_eckd_performance(struct dasd_device *device, void __user *argp) prssdp = (struct dasd_psf_prssd_data *) cqr->data; memset(prssdp, 0, sizeof (struct dasd_psf_prssd_data)); prssdp->order = PSF_ORDER_PRSSD; - prssdp->suborder = 0x01; /* Perfomance Statistics */ + prssdp->suborder = 0x01; /* Performance Statistics */ prssdp->varies[1] = 0x01; /* Perf Statistics for the Subsystem */ ccw = cqr->cpaddr; diff --git a/drivers/s390/char/sclp_rw.c b/drivers/s390/char/sclp_rw.c index d6b06ab81188..ad7195d3de0c 100644 --- a/drivers/s390/char/sclp_rw.c +++ b/drivers/s390/char/sclp_rw.c @@ -76,7 +76,7 @@ sclp_make_buffer(void *page, unsigned short columns, unsigned short htab) } /* - * Return a pointer to the orignal page that has been used to create + * Return a pointer to the original page that has been used to create * the buffer. */ void * diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c index da25f8e24152..8246ef3ab095 100644 --- a/drivers/s390/char/tape_3590.c +++ b/drivers/s390/char/tape_3590.c @@ -1495,7 +1495,7 @@ tape_3590_unit_check(struct tape_device *device, struct tape_request *request, device->cdev->dev.bus_id); return tape_3590_erp_basic(device, request, irb, -EPERM); case 0x8013: - PRINT_WARN("(%s): Another host has priviliged access to the " + PRINT_WARN("(%s): Another host has privileged access to the " "tape device\n", device->cdev->dev.bus_id); PRINT_WARN("(%s): To solve the problem unload the current " "cartridge!\n", device->cdev->dev.bus_id); diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 4f86c0e12961..2dc8110ebf74 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -1286,7 +1286,7 @@ zfcp_erp_strategy_do_action(struct zfcp_erp_action *erp_action) * note: no lock in subsequent strategy routines * (this allows these routine to call schedule, e.g. * kmalloc with such flags or qdio_initialize & friends) - * Note: in case of timeout, the seperate strategies will fail + * Note: in case of timeout, the separate strategies will fail * anyhow. No need for a special action. Even worse, a nameserver * failure would not wake up waiting ports without the call. */ diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c index 51d92b196ee7..22fdc17e0d0e 100644 --- a/drivers/s390/scsi/zfcp_qdio.c +++ b/drivers/s390/scsi/zfcp_qdio.c @@ -529,7 +529,7 @@ zfcp_qdio_sbals_wipe(struct zfcp_fsf_req *fsf_req) /** - * zfcp_qdio_sbale_fill - set address and lenght in current SBALE + * zfcp_qdio_sbale_fill - set address and length in current SBALE * on request_queue */ static void -- cgit v1.2.3-59-g8ed1b From ea29ee16e6ea908c830e70516d440828fd9129a8 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Sat, 26 Jan 2008 14:11:21 +0100 Subject: [S390] Move NOTES and BUG_TABLE. Move the NOTES and BUG_TABLE section in the linker script to the read-only sections right after the text section. Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/vmlinux.lds.S | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index 849120e3e28a..936159199346 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -17,6 +17,12 @@ ENTRY(_start) jiffies = jiffies_64; #endif +PHDRS { + text PT_LOAD FLAGS(5); /* R_E */ + data PT_LOAD FLAGS(7); /* RWE */ + note PT_NOTE FLAGS(0); /* ___ */ +} + SECTIONS { . = 0x00000000; @@ -33,6 +39,9 @@ SECTIONS _etext = .; /* End of text section */ + NOTES :text :note + BUG_TABLE :text + RODATA #ifdef CONFIG_SHARED_KERNEL @@ -49,9 +58,6 @@ SECTIONS __stop___ex_table = .; } - NOTES - BUG_TABLE - .data : { /* Data */ DATA_DATA CONSTRUCTORS -- cgit v1.2.3-59-g8ed1b From 0ac30be461084f30ad6e22c6b91347e880ed41aa Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Sat, 26 Jan 2008 14:11:22 +0100 Subject: [S390] single-step cleanup Signed-off-by: Roland McGrath Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/ptrace.c | 15 ++++++--------- arch/s390/kernel/signal.c | 20 +++++++++++++------- include/asm-s390/ptrace.h | 8 ++++++++ 3 files changed, 27 insertions(+), 16 deletions(-) diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 1d81bf9488ae..6e036bae9875 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -86,13 +86,13 @@ FixPerRegisters(struct task_struct *task) per_info->control_regs.bits.storage_alt_space_ctl = 0; } -static void set_single_step(struct task_struct *task) +void user_enable_single_step(struct task_struct *task) { task->thread.per_info.single_step = 1; FixPerRegisters(task); } -static void clear_single_step(struct task_struct *task) +void user_disable_single_step(struct task_struct *task) { task->thread.per_info.single_step = 0; FixPerRegisters(task); @@ -107,7 +107,7 @@ void ptrace_disable(struct task_struct *child) { /* make sure the single step bit is not set. */ - clear_single_step(child); + user_disable_single_step(child); } #ifndef CONFIG_64BIT @@ -651,7 +651,7 @@ do_ptrace(struct task_struct *child, long request, long addr, long data) clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); child->exit_code = data; /* make sure the single step bit is not set. */ - clear_single_step(child); + user_disable_single_step(child); wake_up_process(child); return 0; @@ -665,7 +665,7 @@ do_ptrace(struct task_struct *child, long request, long addr, long data) return 0; child->exit_code = SIGKILL; /* make sure the single step bit is not set. */ - clear_single_step(child); + user_disable_single_step(child); wake_up_process(child); return 0; @@ -675,10 +675,7 @@ do_ptrace(struct task_struct *child, long request, long addr, long data) return -EIO; clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); child->exit_code = data; - if (data) - set_tsk_thread_flag(child, TIF_SINGLE_STEP); - else - set_single_step(child); + user_enable_single_step(child); /* give it a chance to run. */ wake_up_process(child); return 0; diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c index d264671c1b71..4449bf32cbf1 100644 --- a/arch/s390/kernel/signal.c +++ b/arch/s390/kernel/signal.c @@ -471,6 +471,7 @@ void do_signal(struct pt_regs *regs) if (signr > 0) { /* Whee! Actually deliver the signal. */ + int ret; #ifdef CONFIG_COMPAT if (test_thread_flag(TIF_31BIT)) { extern int handle_signal32(unsigned long sig, @@ -478,15 +479,12 @@ void do_signal(struct pt_regs *regs) siginfo_t *info, sigset_t *oldset, struct pt_regs *regs); - if (handle_signal32( - signr, &ka, &info, oldset, regs) == 0) { - if (test_thread_flag(TIF_RESTORE_SIGMASK)) - clear_thread_flag(TIF_RESTORE_SIGMASK); - } - return; + ret = handle_signal32(signr, &ka, &info, oldset, regs); } + else #endif - if (handle_signal(signr, &ka, &info, oldset, regs) == 0) { + ret = handle_signal(signr, &ka, &info, oldset, regs); + if (!ret) { /* * A signal was successfully delivered; the saved * sigmask will have been stored in the signal frame, @@ -495,6 +493,14 @@ void do_signal(struct pt_regs *regs) */ if (test_thread_flag(TIF_RESTORE_SIGMASK)) clear_thread_flag(TIF_RESTORE_SIGMASK); + + /* + * If we would have taken a single-step trap + * for a normal instruction, act like we took + * one for the handler setup. + */ + if (current->thread.per_info.single_step) + set_thread_flag(TIF_SINGLE_STEP); } return; } diff --git a/include/asm-s390/ptrace.h b/include/asm-s390/ptrace.h index 332ee73688fc..61f6952f2e35 100644 --- a/include/asm-s390/ptrace.h +++ b/include/asm-s390/ptrace.h @@ -465,6 +465,14 @@ struct user_regs_struct #ifdef __KERNEL__ #define __ARCH_SYS_PTRACE 1 +/* + * These are defined as per linux/ptrace.h, which see. + */ +#define arch_has_single_step() (1) +struct task_struct; +extern void user_enable_single_step(struct task_struct *); +extern void user_disable_single_step(struct task_struct *); + #define user_mode(regs) (((regs)->psw.mask & PSW_MASK_PSTATE) != 0) #define instruction_pointer(regs) ((regs)->psw.addr & PSW_ADDR_INSN) #define regs_return_value(regs)((regs)->gprs[2]) -- cgit v1.2.3-59-g8ed1b From 8e09f21574ea3028d5629e5de759e0b196c690c5 Mon Sep 17 00:00:00 2001 From: Stefan Weinhuber Date: Sat, 26 Jan 2008 14:11:23 +0100 Subject: [S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber Signed-off-by: Martin Schwidefsky --- drivers/s390/block/Makefile | 4 +- drivers/s390/block/dasd.c | 1680 ++++++++++++++++++++---------------- drivers/s390/block/dasd_3370_erp.c | 84 -- drivers/s390/block/dasd_3990_erp.c | 358 +++----- drivers/s390/block/dasd_9336_erp.c | 41 - drivers/s390/block/dasd_9343_erp.c | 21 - drivers/s390/block/dasd_alias.c | 903 +++++++++++++++++++ drivers/s390/block/dasd_devmap.c | 94 +- drivers/s390/block/dasd_diag.c | 107 ++- drivers/s390/block/dasd_eckd.c | 787 ++++++++++++----- drivers/s390/block/dasd_eckd.h | 125 ++- drivers/s390/block/dasd_eer.c | 11 +- drivers/s390/block/dasd_erp.c | 25 +- drivers/s390/block/dasd_fba.c | 119 +-- drivers/s390/block/dasd_genhd.c | 76 +- drivers/s390/block/dasd_int.h | 209 +++-- drivers/s390/block/dasd_ioctl.c | 172 ++-- drivers/s390/block/dasd_proc.c | 21 +- 18 files changed, 3117 insertions(+), 1720 deletions(-) delete mode 100644 drivers/s390/block/dasd_3370_erp.c delete mode 100644 drivers/s390/block/dasd_9336_erp.c delete mode 100644 drivers/s390/block/dasd_9343_erp.c create mode 100644 drivers/s390/block/dasd_alias.c diff --git a/drivers/s390/block/Makefile b/drivers/s390/block/Makefile index be9f22d52fd8..0a89e080b389 100644 --- a/drivers/s390/block/Makefile +++ b/drivers/s390/block/Makefile @@ -2,8 +2,8 @@ # S/390 block devices # -dasd_eckd_mod-objs := dasd_eckd.o dasd_3990_erp.o dasd_9343_erp.o -dasd_fba_mod-objs := dasd_fba.o dasd_3370_erp.o dasd_9336_erp.o +dasd_eckd_mod-objs := dasd_eckd.o dasd_3990_erp.o dasd_alias.o +dasd_fba_mod-objs := dasd_fba.o dasd_diag_mod-objs := dasd_diag.o dasd_mod-objs := dasd.o dasd_ioctl.o dasd_proc.o dasd_devmap.o \ dasd_genhd.o dasd_erp.o diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index da4fe1ecef9e..db9193d38986 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -48,13 +48,15 @@ MODULE_LICENSE("GPL"); /* * SECTION: prototypes for static functions of dasd.c */ -static int dasd_alloc_queue(struct dasd_device * device); -static void dasd_setup_queue(struct dasd_device * device); -static void dasd_free_queue(struct dasd_device * device); -static void dasd_flush_request_queue(struct dasd_device *); -static int dasd_flush_ccw_queue(struct dasd_device *, int); -static void dasd_tasklet(struct dasd_device *); +static int dasd_alloc_queue(struct dasd_block *); +static void dasd_setup_queue(struct dasd_block *); +static void dasd_free_queue(struct dasd_block *); +static void dasd_flush_request_queue(struct dasd_block *); +static int dasd_flush_block_queue(struct dasd_block *); +static void dasd_device_tasklet(struct dasd_device *); +static void dasd_block_tasklet(struct dasd_block *); static void do_kick_device(struct work_struct *); +static void dasd_return_cqr_cb(struct dasd_ccw_req *, void *); /* * SECTION: Operations on the device structure. @@ -65,26 +67,23 @@ static wait_queue_head_t dasd_flush_wq; /* * Allocate memory for a new device structure. */ -struct dasd_device * -dasd_alloc_device(void) +struct dasd_device *dasd_alloc_device(void) { struct dasd_device *device; - device = kzalloc(sizeof (struct dasd_device), GFP_ATOMIC); - if (device == NULL) + device = kzalloc(sizeof(struct dasd_device), GFP_ATOMIC); + if (!device) return ERR_PTR(-ENOMEM); - /* open_count = 0 means device online but not in use */ - atomic_set(&device->open_count, -1); /* Get two pages for normal block device operations. */ device->ccw_mem = (void *) __get_free_pages(GFP_ATOMIC | GFP_DMA, 1); - if (device->ccw_mem == NULL) { + if (!device->ccw_mem) { kfree(device); return ERR_PTR(-ENOMEM); } /* Get one page for error recovery. */ device->erp_mem = (void *) get_zeroed_page(GFP_ATOMIC | GFP_DMA); - if (device->erp_mem == NULL) { + if (!device->erp_mem) { free_pages((unsigned long) device->ccw_mem, 1); kfree(device); return ERR_PTR(-ENOMEM); @@ -93,10 +92,9 @@ dasd_alloc_device(void) dasd_init_chunklist(&device->ccw_chunks, device->ccw_mem, PAGE_SIZE*2); dasd_init_chunklist(&device->erp_chunks, device->erp_mem, PAGE_SIZE); spin_lock_init(&device->mem_lock); - spin_lock_init(&device->request_queue_lock); - atomic_set (&device->tasklet_scheduled, 0); + atomic_set(&device->tasklet_scheduled, 0); tasklet_init(&device->tasklet, - (void (*)(unsigned long)) dasd_tasklet, + (void (*)(unsigned long)) dasd_device_tasklet, (unsigned long) device); INIT_LIST_HEAD(&device->ccw_queue); init_timer(&device->timer); @@ -110,8 +108,7 @@ dasd_alloc_device(void) /* * Free memory of a device structure. */ -void -dasd_free_device(struct dasd_device *device) +void dasd_free_device(struct dasd_device *device) { kfree(device->private); free_page((unsigned long) device->erp_mem); @@ -119,11 +116,43 @@ dasd_free_device(struct dasd_device *device) kfree(device); } +/* + * Allocate memory for a new device structure. + */ +struct dasd_block *dasd_alloc_block(void) +{ + struct dasd_block *block; + + block = kzalloc(sizeof(*block), GFP_ATOMIC); + if (!block) + return ERR_PTR(-ENOMEM); + /* open_count = 0 means device online but not in use */ + atomic_set(&block->open_count, -1); + + spin_lock_init(&block->request_queue_lock); + atomic_set(&block->tasklet_scheduled, 0); + tasklet_init(&block->tasklet, + (void (*)(unsigned long)) dasd_block_tasklet, + (unsigned long) block); + INIT_LIST_HEAD(&block->ccw_queue); + spin_lock_init(&block->queue_lock); + init_timer(&block->timer); + + return block; +} + +/* + * Free memory of a device structure. + */ +void dasd_free_block(struct dasd_block *block) +{ + kfree(block); +} + /* * Make a new device known to the system. */ -static int -dasd_state_new_to_known(struct dasd_device *device) +static int dasd_state_new_to_known(struct dasd_device *device) { int rc; @@ -133,12 +162,13 @@ dasd_state_new_to_known(struct dasd_device *device) */ dasd_get_device(device); - rc = dasd_alloc_queue(device); - if (rc) { - dasd_put_device(device); - return rc; + if (device->block) { + rc = dasd_alloc_queue(device->block); + if (rc) { + dasd_put_device(device); + return rc; + } } - device->state = DASD_STATE_KNOWN; return 0; } @@ -146,21 +176,24 @@ dasd_state_new_to_known(struct dasd_device *device) /* * Let the system forget about a device. */ -static int -dasd_state_known_to_new(struct dasd_device * device) +static int dasd_state_known_to_new(struct dasd_device *device) { /* Disable extended error reporting for this device. */ dasd_eer_disable(device); /* Forget the discipline information. */ - if (device->discipline) + if (device->discipline) { + if (device->discipline->uncheck_device) + device->discipline->uncheck_device(device); module_put(device->discipline->owner); + } device->discipline = NULL; if (device->base_discipline) module_put(device->base_discipline->owner); device->base_discipline = NULL; device->state = DASD_STATE_NEW; - dasd_free_queue(device); + if (device->block) + dasd_free_queue(device->block); /* Give up reference we took in dasd_state_new_to_known. */ dasd_put_device(device); @@ -170,19 +203,19 @@ dasd_state_known_to_new(struct dasd_device * device) /* * Request the irq line for the device. */ -static int -dasd_state_known_to_basic(struct dasd_device * device) +static int dasd_state_known_to_basic(struct dasd_device *device) { int rc; /* Allocate and register gendisk structure. */ - rc = dasd_gendisk_alloc(device); - if (rc) - return rc; - + if (device->block) { + rc = dasd_gendisk_alloc(device->block); + if (rc) + return rc; + } /* register 'device' debug area, used for all DBF_DEV_XXX calls */ device->debug_area = debug_register(device->cdev->dev.bus_id, 1, 2, - 8 * sizeof (long)); + 8 * sizeof(long)); debug_register_view(device->debug_area, &debug_sprintf_view); debug_set_level(device->debug_area, DBF_WARNING); DBF_DEV_EVENT(DBF_EMERG, device, "%s", "debug area created"); @@ -194,16 +227,17 @@ dasd_state_known_to_basic(struct dasd_device * device) /* * Release the irq line for the device. Terminate any running i/o. */ -static int -dasd_state_basic_to_known(struct dasd_device * device) +static int dasd_state_basic_to_known(struct dasd_device *device) { int rc; - - dasd_gendisk_free(device); - rc = dasd_flush_ccw_queue(device, 1); + if (device->block) { + dasd_gendisk_free(device->block); + dasd_block_clear_timer(device->block); + } + rc = dasd_flush_device_queue(device); if (rc) return rc; - dasd_clear_timer(device); + dasd_device_clear_timer(device); DBF_DEV_EVENT(DBF_EMERG, device, "%p debug area deleted", device); if (device->debug_area != NULL) { @@ -228,26 +262,32 @@ dasd_state_basic_to_known(struct dasd_device * device) * In case the analysis returns an error, the device setup is stopped * (a fake disk was already added to allow formatting). */ -static int -dasd_state_basic_to_ready(struct dasd_device * device) +static int dasd_state_basic_to_ready(struct dasd_device *device) { int rc; + struct dasd_block *block; rc = 0; - if (device->discipline->do_analysis != NULL) - rc = device->discipline->do_analysis(device); - if (rc) { - if (rc != -EAGAIN) - device->state = DASD_STATE_UNFMT; - return rc; - } + block = device->block; /* make disk known with correct capacity */ - dasd_setup_queue(device); - set_capacity(device->gdp, device->blocks << device->s2b_shift); - device->state = DASD_STATE_READY; - rc = dasd_scan_partitions(device); - if (rc) - device->state = DASD_STATE_BASIC; + if (block) { + if (block->base->discipline->do_analysis != NULL) + rc = block->base->discipline->do_analysis(block); + if (rc) { + if (rc != -EAGAIN) + device->state = DASD_STATE_UNFMT; + return rc; + } + dasd_setup_queue(block); + set_capacity(block->gdp, + block->blocks << block->s2b_shift); + device->state = DASD_STATE_READY; + rc = dasd_scan_partitions(block); + if (rc) + device->state = DASD_STATE_BASIC; + } else { + device->state = DASD_STATE_READY; + } return rc; } @@ -256,28 +296,31 @@ dasd_state_basic_to_ready(struct dasd_device * device) * Forget format information. Check if the target level is basic * and if it is create fake disk for formatting. */ -static int -dasd_state_ready_to_basic(struct dasd_device * device) +static int dasd_state_ready_to_basic(struct dasd_device *device) { int rc; - rc = dasd_flush_ccw_queue(device, 0); - if (rc) - return rc; - dasd_destroy_partitions(device); - dasd_flush_request_queue(device); - device->blocks = 0; - device->bp_block = 0; - device->s2b_shift = 0; device->state = DASD_STATE_BASIC; + if (device->block) { + struct dasd_block *block = device->block; + rc = dasd_flush_block_queue(block); + if (rc) { + device->state = DASD_STATE_READY; + return rc; + } + dasd_destroy_partitions(block); + dasd_flush_request_queue(block); + block->blocks = 0; + block->bp_block = 0; + block->s2b_shift = 0; + } return 0; } /* * Back to basic. */ -static int -dasd_state_unfmt_to_basic(struct dasd_device * device) +static int dasd_state_unfmt_to_basic(struct dasd_device *device) { device->state = DASD_STATE_BASIC; return 0; @@ -291,17 +334,31 @@ dasd_state_unfmt_to_basic(struct dasd_device * device) static int dasd_state_ready_to_online(struct dasd_device * device) { + int rc; + + if (device->discipline->ready_to_online) { + rc = device->discipline->ready_to_online(device); + if (rc) + return rc; + } device->state = DASD_STATE_ONLINE; - dasd_schedule_bh(device); + if (device->block) + dasd_schedule_block_bh(device->block); return 0; } /* * Stop the requeueing of requests again. */ -static int -dasd_state_online_to_ready(struct dasd_device * device) +static int dasd_state_online_to_ready(struct dasd_device *device) { + int rc; + + if (device->discipline->online_to_ready) { + rc = device->discipline->online_to_ready(device); + if (rc) + return rc; + } device->state = DASD_STATE_READY; return 0; } @@ -309,8 +366,7 @@ dasd_state_online_to_ready(struct dasd_device * device) /* * Device startup state changes. */ -static int -dasd_increase_state(struct dasd_device *device) +static int dasd_increase_state(struct dasd_device *device) { int rc; @@ -345,8 +401,7 @@ dasd_increase_state(struct dasd_device *device) /* * Device shutdown state changes. */ -static int -dasd_decrease_state(struct dasd_device *device) +static int dasd_decrease_state(struct dasd_device *device) { int rc; @@ -381,8 +436,7 @@ dasd_decrease_state(struct dasd_device *device) /* * This is the main startup/shutdown routine. */ -static void -dasd_change_state(struct dasd_device *device) +static void dasd_change_state(struct dasd_device *device) { int rc; @@ -409,17 +463,15 @@ dasd_change_state(struct dasd_device *device) * dasd_kick_device will schedule a call do do_kick_device to the kernel * event daemon. */ -static void -do_kick_device(struct work_struct *work) +static void do_kick_device(struct work_struct *work) { struct dasd_device *device = container_of(work, struct dasd_device, kick_work); dasd_change_state(device); - dasd_schedule_bh(device); + dasd_schedule_device_bh(device); dasd_put_device(device); } -void -dasd_kick_device(struct dasd_device *device) +void dasd_kick_device(struct dasd_device *device) { dasd_get_device(device); /* queue call to dasd_kick_device to the kernel event daemon. */ @@ -429,8 +481,7 @@ dasd_kick_device(struct dasd_device *device) /* * Set the target state for a device and starts the state change. */ -void -dasd_set_target_state(struct dasd_device *device, int target) +void dasd_set_target_state(struct dasd_device *device, int target) { /* If we are in probeonly mode stop at DASD_STATE_READY. */ if (dasd_probeonly && target > DASD_STATE_READY) @@ -447,14 +498,12 @@ dasd_set_target_state(struct dasd_device *device, int target) /* * Enable devices with device numbers in [from..to]. */ -static inline int -_wait_for_device(struct dasd_device *device) +static inline int _wait_for_device(struct dasd_device *device) { return (device->state == device->target); } -void -dasd_enable_device(struct dasd_device *device) +void dasd_enable_device(struct dasd_device *device) { dasd_set_target_state(device, DASD_STATE_ONLINE); if (device->state <= DASD_STATE_KNOWN) @@ -475,20 +524,20 @@ unsigned int dasd_profile_level = DASD_PROFILE_OFF; /* * Increments counter in global and local profiling structures. */ -#define dasd_profile_counter(value, counter, device) \ +#define dasd_profile_counter(value, counter, block) \ { \ int index; \ for (index = 0; index < 31 && value >> (2+index); index++); \ dasd_global_profile.counter[index]++; \ - device->profile.counter[index]++; \ + block->profile.counter[index]++; \ } /* * Add profiling information for cqr before execution. */ -static void -dasd_profile_start(struct dasd_device *device, struct dasd_ccw_req * cqr, - struct request *req) +static void dasd_profile_start(struct dasd_block *block, + struct dasd_ccw_req *cqr, + struct request *req) { struct list_head *l; unsigned int counter; @@ -498,19 +547,19 @@ dasd_profile_start(struct dasd_device *device, struct dasd_ccw_req * cqr, /* count the length of the chanq for statistics */ counter = 0; - list_for_each(l, &device->ccw_queue) + list_for_each(l, &block->ccw_queue) if (++counter >= 31) break; dasd_global_profile.dasd_io_nr_req[counter]++; - device->profile.dasd_io_nr_req[counter]++; + block->profile.dasd_io_nr_req[counter]++; } /* * Add profiling information for cqr after execution. */ -static void -dasd_profile_end(struct dasd_device *device, struct dasd_ccw_req * cqr, - struct request *req) +static void dasd_profile_end(struct dasd_block *block, + struct dasd_ccw_req *cqr, + struct request *req) { long strtime, irqtime, endtime, tottime; /* in microseconds */ long tottimeps, sectors; @@ -532,27 +581,27 @@ dasd_profile_end(struct dasd_device *device, struct dasd_ccw_req * cqr, if (!dasd_global_profile.dasd_io_reqs) memset(&dasd_global_profile, 0, - sizeof (struct dasd_profile_info_t)); + sizeof(struct dasd_profile_info_t)); dasd_global_profile.dasd_io_reqs++; dasd_global_profile.dasd_io_sects += sectors; - if (!device->profile.dasd_io_reqs) - memset(&device->profile, 0, - sizeof (struct dasd_profile_info_t)); - device->profile.dasd_io_reqs++; - device->profile.dasd_io_sects += sectors; + if (!block->profile.dasd_io_reqs) + memset(&block->profile, 0, + sizeof(struct dasd_profile_info_t)); + block->profile.dasd_io_reqs++; + block->profile.dasd_io_sects += sectors; - dasd_profile_counter(sectors, dasd_io_secs, device); - dasd_profile_counter(tottime, dasd_io_times, device); - dasd_profile_counter(tottimeps, dasd_io_timps, device); - dasd_profile_counter(strtime, dasd_io_time1, device); - dasd_profile_counter(irqtime, dasd_io_time2, device); - dasd_profile_counter(irqtime / sectors, dasd_io_time2ps, device); - dasd_profile_counter(endtime, dasd_io_time3, device); + dasd_profile_counter(sectors, dasd_io_secs, block); + dasd_profile_counter(tottime, dasd_io_times, block); + dasd_profile_counter(tottimeps, dasd_io_timps, block); + dasd_profile_counter(strtime, dasd_io_time1, block); + dasd_profile_counter(irqtime, dasd_io_time2, block); + dasd_profile_counter(irqtime / sectors, dasd_io_time2ps, block); + dasd_profile_counter(endtime, dasd_io_time3, block); } #else -#define dasd_profile_start(device, cqr, req) do {} while (0) -#define dasd_profile_end(device, cqr, req) do {} while (0) +#define dasd_profile_start(block, cqr, req) do {} while (0) +#define dasd_profile_end(block, cqr, req) do {} while (0) #endif /* CONFIG_DASD_PROFILE */ /* @@ -562,9 +611,9 @@ dasd_profile_end(struct dasd_device *device, struct dasd_ccw_req * cqr, * memory and 2) dasd_smalloc_request uses the static ccw memory * that gets allocated for each device. */ -struct dasd_ccw_req * -dasd_kmalloc_request(char *magic, int cplength, int datasize, - struct dasd_device * device) +struct dasd_ccw_req *dasd_kmalloc_request(char *magic, int cplength, + int datasize, + struct dasd_device *device) { struct dasd_ccw_req *cqr; @@ -600,9 +649,9 @@ dasd_kmalloc_request(char *magic, int cplength, int datasize, return cqr; } -struct dasd_ccw_req * -dasd_smalloc_request(char *magic, int cplength, int datasize, - struct dasd_device * device) +struct dasd_ccw_req *dasd_smalloc_request(char *magic, int cplength, + int datasize, + struct dasd_device *device) { unsigned long flags; struct dasd_ccw_req *cqr; @@ -649,8 +698,7 @@ dasd_smalloc_request(char *magic, int cplength, int datasize, * idal lists that might have been created by dasd_set_cda and the * struct dasd_ccw_req itself. */ -void -dasd_kfree_request(struct dasd_ccw_req * cqr, struct dasd_device * device) +void dasd_kfree_request(struct dasd_ccw_req *cqr, struct dasd_device *device) { #ifdef CONFIG_64BIT struct ccw1 *ccw; @@ -667,8 +715,7 @@ dasd_kfree_request(struct dasd_ccw_req * cqr, struct dasd_device * device) dasd_put_device(device); } -void -dasd_sfree_request(struct dasd_ccw_req * cqr, struct dasd_device * device) +void dasd_sfree_request(struct dasd_ccw_req *cqr, struct dasd_device *device) { unsigned long flags; @@ -681,14 +728,13 @@ dasd_sfree_request(struct dasd_ccw_req * cqr, struct dasd_device * device) /* * Check discipline magic in cqr. */ -static inline int -dasd_check_cqr(struct dasd_ccw_req *cqr) +static inline int dasd_check_cqr(struct dasd_ccw_req *cqr) { struct dasd_device *device; if (cqr == NULL) return -EINVAL; - device = cqr->device; + device = cqr->startdev; if (strncmp((char *) &cqr->magic, device->discipline->ebcname, 4)) { DEV_MESSAGE(KERN_WARNING, device, " dasd_ccw_req 0x%08x magic doesn't match" @@ -706,8 +752,7 @@ dasd_check_cqr(struct dasd_ccw_req *cqr) * ccw_device_clear can fail if the i/o subsystem * is in a bad mood. */ -int -dasd_term_IO(struct dasd_ccw_req * cqr) +int dasd_term_IO(struct dasd_ccw_req *cqr) { struct dasd_device *device; int retries, rc; @@ -717,13 +762,13 @@ dasd_term_IO(struct dasd_ccw_req * cqr) if (rc) return rc; retries = 0; - device = (struct dasd_device *) cqr->device; + device = (struct dasd_device *) cqr->startdev; while ((retries < 5) && (cqr->status == DASD_CQR_IN_IO)) { rc = ccw_device_clear(device->cdev, (long) cqr); switch (rc) { case 0: /* termination successful */ cqr->retries--; - cqr->status = DASD_CQR_CLEAR; + cqr->status = DASD_CQR_CLEAR_PENDING; cqr->stopclk = get_clock(); cqr->starttime = 0; DBF_DEV_EVENT(DBF_DEBUG, device, @@ -753,7 +798,7 @@ dasd_term_IO(struct dasd_ccw_req * cqr) } retries++; } - dasd_schedule_bh(device); + dasd_schedule_device_bh(device); return rc; } @@ -761,8 +806,7 @@ dasd_term_IO(struct dasd_ccw_req * cqr) * Start the i/o. This start_IO can fail if the channel is really busy. * In that case set up a timer to start the request later. */ -int -dasd_start_IO(struct dasd_ccw_req * cqr) +int dasd_start_IO(struct dasd_ccw_req *cqr) { struct dasd_device *device; int rc; @@ -771,12 +815,12 @@ dasd_start_IO(struct dasd_ccw_req * cqr) rc = dasd_check_cqr(cqr); if (rc) return rc; - device = (struct dasd_device *) cqr->device; + device = (struct dasd_device *) cqr->startdev; if (cqr->retries < 0) { DEV_MESSAGE(KERN_DEBUG, device, "start_IO: request %p (%02x/%i) - no retry left.", cqr, cqr->status, cqr->retries); - cqr->status = DASD_CQR_FAILED; + cqr->status = DASD_CQR_ERROR; return -EIO; } cqr->startclk = get_clock(); @@ -833,8 +877,7 @@ dasd_start_IO(struct dasd_ccw_req * cqr) * The head of the ccw queue will have status DASD_CQR_IN_IO for 1), * DASD_CQR_QUEUED for 2) and 3). */ -static void -dasd_timeout_device(unsigned long ptr) +static void dasd_device_timeout(unsigned long ptr) { unsigned long flags; struct dasd_device *device; @@ -844,14 +887,13 @@ dasd_timeout_device(unsigned long ptr) /* re-activate request queue */ device->stopped &= ~DASD_STOPPED_PENDING; spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); - dasd_schedule_bh(device); + dasd_schedule_device_bh(device); } /* * Setup timeout for a device in jiffies. */ -void -dasd_set_timer(struct dasd_device *device, int expires) +void dasd_device_set_timer(struct dasd_device *device, int expires) { if (expires == 0) { if (timer_pending(&device->timer)) @@ -862,7 +904,7 @@ dasd_set_timer(struct dasd_device *device, int expires) if (mod_timer(&device->timer, jiffies + expires)) return; } - device->timer.function = dasd_timeout_device; + device->timer.function = dasd_device_timeout; device->timer.data = (unsigned long) device; device->timer.expires = jiffies + expires; add_timer(&device->timer); @@ -871,15 +913,14 @@ dasd_set_timer(struct dasd_device *device, int expires) /* * Clear timeout for a device. */ -void -dasd_clear_timer(struct dasd_device *device) +void dasd_device_clear_timer(struct dasd_device *device) { if (timer_pending(&device->timer)) del_timer(&device->timer); } -static void -dasd_handle_killed_request(struct ccw_device *cdev, unsigned long intparm) +static void dasd_handle_killed_request(struct ccw_device *cdev, + unsigned long intparm) { struct dasd_ccw_req *cqr; struct dasd_device *device; @@ -893,7 +934,7 @@ dasd_handle_killed_request(struct ccw_device *cdev, unsigned long intparm) return; } - device = (struct dasd_device *) cqr->device; + device = (struct dasd_device *) cqr->startdev; if (device == NULL || device != dasd_device_from_cdev_locked(cdev) || strncmp(device->discipline->ebcname, (char *) &cqr->magic, 4)) { @@ -905,46 +946,32 @@ dasd_handle_killed_request(struct ccw_device *cdev, unsigned long intparm) /* Schedule request to be retried. */ cqr->status = DASD_CQR_QUEUED; - dasd_clear_timer(device); - dasd_schedule_bh(device); + dasd_device_clear_timer(device); + dasd_schedule_device_bh(device); dasd_put_device(device); } -static void -dasd_handle_state_change_pending(struct dasd_device *device) +void dasd_generic_handle_state_change(struct dasd_device *device) { - struct dasd_ccw_req *cqr; - struct list_head *l, *n; - /* First of all start sense subsystem status request. */ dasd_eer_snss(device); device->stopped &= ~DASD_STOPPED_PENDING; - - /* restart all 'running' IO on queue */ - list_for_each_safe(l, n, &device->ccw_queue) { - cqr = list_entry(l, struct dasd_ccw_req, list); - if (cqr->status == DASD_CQR_IN_IO) { - cqr->status = DASD_CQR_QUEUED; - } - } - dasd_clear_timer(device); - dasd_schedule_bh(device); + dasd_schedule_device_bh(device); + if (device->block) + dasd_schedule_block_bh(device->block); } /* * Interrupt handler for "normal" ssch-io based dasd devices. */ -void -dasd_int_handler(struct ccw_device *cdev, unsigned long intparm, - struct irb *irb) +void dasd_int_handler(struct ccw_device *cdev, unsigned long intparm, + struct irb *irb) { struct dasd_ccw_req *cqr, *next; struct dasd_device *device; unsigned long long now; int expires; - dasd_era_t era; - char mask; if (IS_ERR(irb)) { switch (PTR_ERR(irb)) { @@ -969,29 +996,25 @@ dasd_int_handler(struct ccw_device *cdev, unsigned long intparm, cdev->dev.bus_id, ((irb->scsw.cstat<<8)|irb->scsw.dstat), (unsigned int) intparm); - /* first of all check for state change pending interrupt */ - mask = DEV_STAT_ATTENTION | DEV_STAT_DEV_END | DEV_STAT_UNIT_EXCEP; - if ((irb->scsw.dstat & mask) == mask) { + /* check for unsolicited interrupts */ + cqr = (struct dasd_ccw_req *) intparm; + if (!cqr || ((irb->scsw.cc == 1) && + (irb->scsw.fctl & SCSW_FCTL_START_FUNC) && + (irb->scsw.stctl & SCSW_STCTL_STATUS_PEND)) ) { + if (cqr && cqr->status == DASD_CQR_IN_IO) + cqr->status = DASD_CQR_QUEUED; device = dasd_device_from_cdev_locked(cdev); if (!IS_ERR(device)) { - dasd_handle_state_change_pending(device); + dasd_device_clear_timer(device); + device->discipline->handle_unsolicited_interrupt(device, + irb); dasd_put_device(device); } return; } - cqr = (struct dasd_ccw_req *) intparm; - - /* check for unsolicited interrupts */ - if (cqr == NULL) { - MESSAGE(KERN_DEBUG, - "unsolicited interrupt received: bus_id %s", - cdev->dev.bus_id); - return; - } - - device = (struct dasd_device *) cqr->device; - if (device == NULL || + device = (struct dasd_device *) cqr->startdev; + if (!device || strncmp(device->discipline->ebcname, (char *) &cqr->magic, 4)) { MESSAGE(KERN_DEBUG, "invalid device in request: bus_id %s", cdev->dev.bus_id); @@ -999,12 +1022,12 @@ dasd_int_handler(struct ccw_device *cdev, unsigned long intparm, } /* Check for clear pending */ - if (cqr->status == DASD_CQR_CLEAR && + if (cqr->status == DASD_CQR_CLEAR_PENDING && irb->scsw.fctl & SCSW_FCTL_CLEAR_FUNC) { - cqr->status = DASD_CQR_QUEUED; - dasd_clear_timer(device); + cqr->status = DASD_CQR_CLEARED; + dasd_device_clear_timer(device); wake_up(&dasd_flush_wq); - dasd_schedule_bh(device); + dasd_schedule_device_bh(device); return; } @@ -1017,272 +1040,164 @@ dasd_int_handler(struct ccw_device *cdev, unsigned long intparm, } DBF_DEV_EVENT(DBF_DEBUG, device, "Int: CS/DS 0x%04x for cqr %p", ((irb->scsw.cstat << 8) | irb->scsw.dstat), cqr); - - /* Find out the appropriate era_action. */ - if (irb->scsw.fctl & SCSW_FCTL_HALT_FUNC) - era = dasd_era_fatal; - else if (irb->scsw.dstat == (DEV_STAT_CHN_END | DEV_STAT_DEV_END) && - irb->scsw.cstat == 0 && - !irb->esw.esw0.erw.cons) - era = dasd_era_none; - else if (irb->esw.esw0.erw.cons) - era = device->discipline->examine_error(cqr, irb); - else - era = dasd_era_recover; - - DBF_DEV_EVENT(DBF_DEBUG, device, "era_code %d", era); + next = NULL; expires = 0; - if (era == dasd_era_none) { - cqr->status = DASD_CQR_DONE; + if (irb->scsw.dstat == (DEV_STAT_CHN_END | DEV_STAT_DEV_END) && + irb->scsw.cstat == 0 && !irb->esw.esw0.erw.cons) { + /* request was completed successfully */ + cqr->status = DASD_CQR_SUCCESS; cqr->stopclk = now; /* Start first request on queue if possible -> fast_io. */ - if (cqr->list.next != &device->ccw_queue) { - next = list_entry(cqr->list.next, - struct dasd_ccw_req, list); - if ((next->status == DASD_CQR_QUEUED) && - (!device->stopped)) { - if (device->discipline->start_IO(next) == 0) - expires = next->expires; - else - DEV_MESSAGE(KERN_DEBUG, device, "%s", - "Interrupt fastpath " - "failed!"); - } + if (cqr->devlist.next != &device->ccw_queue) { + next = list_entry(cqr->devlist.next, + struct dasd_ccw_req, devlist); } - } else { /* error */ - memcpy(&cqr->irb, irb, sizeof (struct irb)); + } else { /* error */ + memcpy(&cqr->irb, irb, sizeof(struct irb)); if (device->features & DASD_FEATURE_ERPLOG) { - /* dump sense data */ dasd_log_sense(cqr, irb); } - switch (era) { - case dasd_era_fatal: - cqr->status = DASD_CQR_FAILED; - cqr->stopclk = now; - break; - case dasd_era_recover: + /* If we have no sense data, or we just don't want complex ERP + * for this request, but if we have retries left, then just + * reset this request and retry it in the fastpath + */ + if (!(cqr->irb.esw.esw0.erw.cons && + test_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags)) && + cqr->retries > 0) { + DEV_MESSAGE(KERN_DEBUG, device, + "default ERP in fastpath (%i retries left)", + cqr->retries); + cqr->lpm = LPM_ANYPATH; + cqr->status = DASD_CQR_QUEUED; + next = cqr; + } else cqr->status = DASD_CQR_ERROR; - break; - default: - BUG(); - } + } + if (next && (next->status == DASD_CQR_QUEUED) && + (!device->stopped)) { + if (device->discipline->start_IO(next) == 0) + expires = next->expires; + else + DEV_MESSAGE(KERN_DEBUG, device, "%s", + "Interrupt fastpath " + "failed!"); } if (expires != 0) - dasd_set_timer(device, expires); + dasd_device_set_timer(device, expires); else - dasd_clear_timer(device); - dasd_schedule_bh(device); + dasd_device_clear_timer(device); + dasd_schedule_device_bh(device); } /* - * posts the buffer_cache about a finalized request + * If we have an error on a dasd_block layer request then we cancel + * and return all further requests from the same dasd_block as well. */ -static inline void -dasd_end_request(struct request *req, int uptodate) +static void __dasd_device_recovery(struct dasd_device *device, + struct dasd_ccw_req *ref_cqr) { - if (end_that_request_first(req, uptodate, req->hard_nr_sectors)) - BUG(); - add_disk_randomness(req->rq_disk); - end_that_request_last(req, uptodate); -} + struct list_head *l, *n; + struct dasd_ccw_req *cqr; -/* - * Process finished error recovery ccw. - */ -static inline void -__dasd_process_erp(struct dasd_device *device, struct dasd_ccw_req *cqr) -{ - dasd_erp_fn_t erp_fn; + /* + * only requeue request that came from the dasd_block layer + */ + if (!ref_cqr->block) + return; - if (cqr->status == DASD_CQR_DONE) - DBF_DEV_EVENT(DBF_NOTICE, device, "%s", "ERP successful"); - else - DEV_MESSAGE(KERN_ERR, device, "%s", "ERP unsuccessful"); - erp_fn = device->discipline->erp_postaction(cqr); - erp_fn(cqr); -} + list_for_each_safe(l, n, &device->ccw_queue) { + cqr = list_entry(l, struct dasd_ccw_req, devlist); + if (cqr->status == DASD_CQR_QUEUED && + ref_cqr->block == cqr->block) { + cqr->status = DASD_CQR_CLEARED; + } + } +}; /* - * Process ccw request queue. + * Remove those ccw requests from the queue that need to be returned + * to the upper layer. */ -static void -__dasd_process_ccw_queue(struct dasd_device * device, - struct list_head *final_queue) +static void __dasd_device_process_ccw_queue(struct dasd_device *device, + struct list_head *final_queue) { struct list_head *l, *n; struct dasd_ccw_req *cqr; - dasd_erp_fn_t erp_fn; -restart: /* Process request with final status. */ list_for_each_safe(l, n, &device->ccw_queue) { - cqr = list_entry(l, struct dasd_ccw_req, list); + cqr = list_entry(l, struct dasd_ccw_req, devlist); + /* Stop list processing at the first non-final request. */ - if (cqr->status != DASD_CQR_DONE && - cqr->status != DASD_CQR_FAILED && - cqr->status != DASD_CQR_ERROR) + if (cqr->status == DASD_CQR_QUEUED || + cqr->status == DASD_CQR_IN_IO || + cqr->status == DASD_CQR_CLEAR_PENDING) break; - /* Process requests with DASD_CQR_ERROR */ if (cqr->status == DASD_CQR_ERROR) { - if (cqr->irb.scsw.fctl & SCSW_FCTL_HALT_FUNC) { - cqr->status = DASD_CQR_FAILED; - cqr->stopclk = get_clock(); - } else { - if (cqr->irb.esw.esw0.erw.cons && - test_bit(DASD_CQR_FLAGS_USE_ERP, - &cqr->flags)) { - erp_fn = device->discipline-> - erp_action(cqr); - erp_fn(cqr); - } else - dasd_default_erp_action(cqr); - } - goto restart; - } - - /* First of all call extended error reporting. */ - if (dasd_eer_enabled(device) && - cqr->status == DASD_CQR_FAILED) { - dasd_eer_write(device, cqr, DASD_EER_FATALERROR); - - /* restart request */ - cqr->status = DASD_CQR_QUEUED; - cqr->retries = 255; - device->stopped |= DASD_STOPPED_QUIESCE; - goto restart; + __dasd_device_recovery(device, cqr); } - - /* Process finished ERP request. */ - if (cqr->refers) { - __dasd_process_erp(device, cqr); - goto restart; - } - /* Rechain finished requests to final queue */ - cqr->endclk = get_clock(); - list_move_tail(&cqr->list, final_queue); + list_move_tail(&cqr->devlist, final_queue); } } -static void -dasd_end_request_cb(struct dasd_ccw_req * cqr, void *data) -{ - struct request *req; - struct dasd_device *device; - int status; - - req = (struct request *) data; - device = cqr->device; - dasd_profile_end(device, cqr, req); - status = cqr->device->discipline->free_cp(cqr,req); - spin_lock_irq(&device->request_queue_lock); - dasd_end_request(req, status); - spin_unlock_irq(&device->request_queue_lock); -} - - /* - * Fetch requests from the block device queue. + * the cqrs from the final queue are returned to the upper layer + * by setting a dasd_block state and calling the callback function */ -static void -__dasd_process_blk_queue(struct dasd_device * device) +static void __dasd_device_process_final_queue(struct dasd_device *device, + struct list_head *final_queue) { - struct request_queue *queue; - struct request *req; + struct list_head *l, *n; struct dasd_ccw_req *cqr; - int nr_queued; - - queue = device->request_queue; - /* No queue ? Then there is nothing to do. */ - if (queue == NULL) - return; - - /* - * We requeue request from the block device queue to the ccw - * queue only in two states. In state DASD_STATE_READY the - * partition detection is done and we need to requeue requests - * for that. State DASD_STATE_ONLINE is normal block device - * operation. - */ - if (device->state != DASD_STATE_READY && - device->state != DASD_STATE_ONLINE) - return; - nr_queued = 0; - /* Now we try to fetch requests from the request queue */ - list_for_each_entry(cqr, &device->ccw_queue, list) - if (cqr->status == DASD_CQR_QUEUED) - nr_queued++; - while (!blk_queue_plugged(queue) && - elv_next_request(queue) && - nr_queued < DASD_CHANQ_MAX_SIZE) { - req = elv_next_request(queue); - if (device->features & DASD_FEATURE_READONLY && - rq_data_dir(req) == WRITE) { - DBF_DEV_EVENT(DBF_ERR, device, - "Rejecting write request %p", - req); - blkdev_dequeue_request(req); - dasd_end_request(req, 0); - continue; - } - if (device->stopped & DASD_STOPPED_DC_EIO) { - blkdev_dequeue_request(req); - dasd_end_request(req, 0); - continue; - } - cqr = device->discipline->build_cp(device, req); - if (IS_ERR(cqr)) { - if (PTR_ERR(cqr) == -ENOMEM) - break; /* terminate request queue loop */ - if (PTR_ERR(cqr) == -EAGAIN) { - /* - * The current request cannot be build right - * now, we have to try later. If this request - * is the head-of-queue we stop the device - * for 1/2 second. - */ - if (!list_empty(&device->ccw_queue)) - break; - device->stopped |= DASD_STOPPED_PENDING; - dasd_set_timer(device, HZ/2); - break; - } - DBF_DEV_EVENT(DBF_ERR, device, - "CCW creation failed (rc=%ld) " - "on request %p", - PTR_ERR(cqr), req); - blkdev_dequeue_request(req); - dasd_end_request(req, 0); - continue; + list_for_each_safe(l, n, final_queue) { + cqr = list_entry(l, struct dasd_ccw_req, devlist); + list_del_init(&cqr->devlist); + if (cqr->block) + spin_lock_bh(&cqr->block->queue_lock); + switch (cqr->status) { + case DASD_CQR_SUCCESS: + cqr->status = DASD_CQR_DONE; + break; + case DASD_CQR_ERROR: + cqr->status = DASD_CQR_NEED_ERP; + break; + case DASD_CQR_CLEARED: + cqr->status = DASD_CQR_TERMINATED; + break; + default: + DEV_MESSAGE(KERN_ERR, device, + "wrong cqr status in __dasd_process_final_queue " + "for cqr %p, status %x", + cqr, cqr->status); + BUG(); } - cqr->callback = dasd_end_request_cb; - cqr->callback_data = (void *) req; - cqr->status = DASD_CQR_QUEUED; - blkdev_dequeue_request(req); - list_add_tail(&cqr->list, &device->ccw_queue); - dasd_profile_start(device, cqr, req); - nr_queued++; + if (cqr->block) + spin_unlock_bh(&cqr->block->queue_lock); + if (cqr->callback != NULL) + (cqr->callback)(cqr, cqr->callback_data); } } + + /* * Take a look at the first request on the ccw queue and check * if it reached its expire time. If so, terminate the IO. */ -static void -__dasd_check_expire(struct dasd_device * device) +static void __dasd_device_check_expire(struct dasd_device *device) { struct dasd_ccw_req *cqr; if (list_empty(&device->ccw_queue)) return; - cqr = list_entry(device->ccw_queue.next, struct dasd_ccw_req, list); + cqr = list_entry(device->ccw_queue.next, struct dasd_ccw_req, devlist); if ((cqr->status == DASD_CQR_IN_IO && cqr->expires != 0) && (time_after_eq(jiffies, cqr->expires + cqr->starttime))) { if (device->discipline->term_IO(cqr) != 0) { /* Hmpf, try again in 5 sec */ - dasd_set_timer(device, 5*HZ); + dasd_device_set_timer(device, 5*HZ); DEV_MESSAGE(KERN_ERR, device, "internal error - timeout (%is) expired " "for cqr %p, termination failed, " @@ -1301,77 +1216,53 @@ __dasd_check_expire(struct dasd_device * device) * Take a look at the first request on the ccw queue and check * if it needs to be started. */ -static void -__dasd_start_head(struct dasd_device * device) +static void __dasd_device_start_head(struct dasd_device *device) { struct dasd_ccw_req *cqr; int rc; if (list_empty(&device->ccw_queue)) return; - cqr = list_entry(device->ccw_queue.next, struct dasd_ccw_req, list); + cqr = list_entry(device->ccw_queue.next, struct dasd_ccw_req, devlist); if (cqr->status != DASD_CQR_QUEUED) return; - /* Non-temporary stop condition will trigger fail fast */ - if (device->stopped & ~DASD_STOPPED_PENDING && - test_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags) && - (!dasd_eer_enabled(device))) { - cqr->status = DASD_CQR_FAILED; - dasd_schedule_bh(device); + /* when device is stopped, return request to previous layer */ + if (device->stopped) { + cqr->status = DASD_CQR_CLEARED; + dasd_schedule_device_bh(device); return; } - /* Don't try to start requests if device is stopped */ - if (device->stopped) - return; rc = device->discipline->start_IO(cqr); if (rc == 0) - dasd_set_timer(device, cqr->expires); + dasd_device_set_timer(device, cqr->expires); else if (rc == -EACCES) { - dasd_schedule_bh(device); + dasd_schedule_device_bh(device); } else /* Hmpf, try again in 1/2 sec */ - dasd_set_timer(device, 50); -} - -static inline int -_wait_for_clear(struct dasd_ccw_req *cqr) -{ - return (cqr->status == DASD_CQR_QUEUED); + dasd_device_set_timer(device, 50); } /* - * Remove all requests from the ccw queue (all = '1') or only block device - * requests in case all = '0'. - * Take care of the erp-chain (chained via cqr->refers) and remove either - * the whole erp-chain or none of the erp-requests. - * If a request is currently running, term_IO is called and the request - * is re-queued. Prior to removing the terminated request we need to wait - * for the clear-interrupt. - * In case termination is not possible we stop processing and just finishing - * the already moved requests. + * Go through all request on the dasd_device request queue, + * terminate them on the cdev if necessary, and return them to the + * submitting layer via callback. + * Note: + * Make sure that all 'submitting layers' still exist when + * this function is called!. In other words, when 'device' is a base + * device then all block layer requests must have been removed before + * via dasd_flush_block_queue. */ -static int -dasd_flush_ccw_queue(struct dasd_device * device, int all) +int dasd_flush_device_queue(struct dasd_device *device) { - struct dasd_ccw_req *cqr, *orig, *n; - int rc, i; - + struct dasd_ccw_req *cqr, *n; + int rc; struct list_head flush_queue; INIT_LIST_HEAD(&flush_queue); spin_lock_irq(get_ccwdev_lock(device->cdev)); rc = 0; -restart: - list_for_each_entry_safe(cqr, n, &device->ccw_queue, list) { - /* get original request of erp request-chain */ - for (orig = cqr; orig->refers != NULL; orig = orig->refers); - - /* Flush all request or only block device requests? */ - if (all == 0 && cqr->callback != dasd_end_request_cb && - orig->callback != dasd_end_request_cb) { - continue; - } + list_for_each_entry_safe(cqr, n, &device->ccw_queue, devlist) { /* Check status and move request to flush_queue */ switch (cqr->status) { case DASD_CQR_IN_IO: @@ -1387,90 +1278,60 @@ restart: } break; case DASD_CQR_QUEUED: - case DASD_CQR_ERROR: - /* set request to FAILED */ cqr->stopclk = get_clock(); - cqr->status = DASD_CQR_FAILED; + cqr->status = DASD_CQR_CLEARED; break; - default: /* do not touch the others */ + default: /* no need to modify the others */ break; } - /* Rechain request (including erp chain) */ - for (i = 0; cqr != NULL; cqr = cqr->refers, i++) { - cqr->endclk = get_clock(); - list_move_tail(&cqr->list, &flush_queue); - } - if (i > 1) - /* moved more than one request - need to restart */ - goto restart; + list_move_tail(&cqr->devlist, &flush_queue); } - finished: spin_unlock_irq(get_ccwdev_lock(device->cdev)); - /* Now call the callback function of flushed requests */ -restart_cb: - list_for_each_entry_safe(cqr, n, &flush_queue, list) { - if (cqr->status == DASD_CQR_CLEAR) { - /* wait for clear interrupt! */ - wait_event(dasd_flush_wq, _wait_for_clear(cqr)); - cqr->status = DASD_CQR_FAILED; - } - /* Process finished ERP request. */ - if (cqr->refers) { - __dasd_process_erp(device, cqr); - /* restart list_for_xx loop since dasd_process_erp - * might remove multiple elements */ - goto restart_cb; - } - /* call the callback function */ - cqr->endclk = get_clock(); - if (cqr->callback != NULL) - (cqr->callback)(cqr, cqr->callback_data); - } + /* + * After this point all requests must be in state CLEAR_PENDING, + * CLEARED, SUCCESS or ERROR. Now wait for CLEAR_PENDING to become + * one of the others. + */ + list_for_each_entry_safe(cqr, n, &flush_queue, devlist) + wait_event(dasd_flush_wq, + (cqr->status != DASD_CQR_CLEAR_PENDING)); + /* + * Now set each request back to TERMINATED, DONE or NEED_ERP + * and call the callback function of flushed requests + */ + __dasd_device_process_final_queue(device, &flush_queue); return rc; } /* * Acquire the device lock and process queues for the device. */ -static void -dasd_tasklet(struct dasd_device * device) +static void dasd_device_tasklet(struct dasd_device *device) { struct list_head final_queue; - struct list_head *l, *n; - struct dasd_ccw_req *cqr; atomic_set (&device->tasklet_scheduled, 0); INIT_LIST_HEAD(&final_queue); spin_lock_irq(get_ccwdev_lock(device->cdev)); /* Check expire time of first request on the ccw queue. */ - __dasd_check_expire(device); - /* Finish off requests on ccw queue */ - __dasd_process_ccw_queue(device, &final_queue); + __dasd_device_check_expire(device); + /* find final requests on ccw queue */ + __dasd_device_process_ccw_queue(device, &final_queue); spin_unlock_irq(get_ccwdev_lock(device->cdev)); /* Now call the callback function of requests with final status */ - list_for_each_safe(l, n, &final_queue) { - cqr = list_entry(l, struct dasd_ccw_req, list); - list_del_init(&cqr->list); - if (cqr->callback != NULL) - (cqr->callback)(cqr, cqr->callback_data); - } - spin_lock_irq(&device->request_queue_lock); - spin_lock(get_ccwdev_lock(device->cdev)); - /* Get new request from the block device request queue */ - __dasd_process_blk_queue(device); + __dasd_device_process_final_queue(device, &final_queue); + spin_lock_irq(get_ccwdev_lock(device->cdev)); /* Now check if the head of the ccw queue needs to be started. */ - __dasd_start_head(device); - spin_unlock(get_ccwdev_lock(device->cdev)); - spin_unlock_irq(&device->request_queue_lock); + __dasd_device_start_head(device); + spin_unlock_irq(get_ccwdev_lock(device->cdev)); dasd_put_device(device); } /* * Schedules a call to dasd_tasklet over the device tasklet. */ -void -dasd_schedule_bh(struct dasd_device * device) +void dasd_schedule_device_bh(struct dasd_device *device) { /* Protect against rescheduling. */ if (atomic_cmpxchg (&device->tasklet_scheduled, 0, 1) != 0) @@ -1480,160 +1341,109 @@ dasd_schedule_bh(struct dasd_device * device) } /* - * Queue a request to the head of the ccw_queue. Start the I/O if - * possible. + * Queue a request to the head of the device ccw_queue. + * Start the I/O if possible. */ -void -dasd_add_request_head(struct dasd_ccw_req *req) +void dasd_add_request_head(struct dasd_ccw_req *cqr) { struct dasd_device *device; unsigned long flags; - device = req->device; + device = cqr->startdev; spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); - req->status = DASD_CQR_QUEUED; - req->device = device; - list_add(&req->list, &device->ccw_queue); + cqr->status = DASD_CQR_QUEUED; + list_add(&cqr->devlist, &device->ccw_queue); /* let the bh start the request to keep them in order */ - dasd_schedule_bh(device); + dasd_schedule_device_bh(device); spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); } /* - * Queue a request to the tail of the ccw_queue. Start the I/O if - * possible. + * Queue a request to the tail of the device ccw_queue. + * Start the I/O if possible. */ -void -dasd_add_request_tail(struct dasd_ccw_req *req) +void dasd_add_request_tail(struct dasd_ccw_req *cqr) { struct dasd_device *device; unsigned long flags; - device = req->device; + device = cqr->startdev; spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); - req->status = DASD_CQR_QUEUED; - req->device = device; - list_add_tail(&req->list, &device->ccw_queue); + cqr->status = DASD_CQR_QUEUED; + list_add_tail(&cqr->devlist, &device->ccw_queue); /* let the bh start the request to keep them in order */ - dasd_schedule_bh(device); + dasd_schedule_device_bh(device); spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); } /* - * Wakeup callback. + * Wakeup helper for the 'sleep_on' functions. */ -static void -dasd_wakeup_cb(struct dasd_ccw_req *cqr, void *data) +static void dasd_wakeup_cb(struct dasd_ccw_req *cqr, void *data) { wake_up((wait_queue_head_t *) data); } -static inline int -_wait_for_wakeup(struct dasd_ccw_req *cqr) +static inline int _wait_for_wakeup(struct dasd_ccw_req *cqr) { struct dasd_device *device; int rc; - device = cqr->device; + device = cqr->startdev; spin_lock_irq(get_ccwdev_lock(device->cdev)); rc = ((cqr->status == DASD_CQR_DONE || - cqr->status == DASD_CQR_FAILED) && - list_empty(&cqr->list)); + cqr->status == DASD_CQR_NEED_ERP || + cqr->status == DASD_CQR_TERMINATED) && + list_empty(&cqr->devlist)); spin_unlock_irq(get_ccwdev_lock(device->cdev)); return rc; } /* - * Attempts to start a special ccw queue and waits for its completion. + * Queue a request to the tail of the device ccw_queue and wait for + * it's completion. */ -int -dasd_sleep_on(struct dasd_ccw_req * cqr) +int dasd_sleep_on(struct dasd_ccw_req *cqr) { wait_queue_head_t wait_q; struct dasd_device *device; int rc; - device = cqr->device; - spin_lock_irq(get_ccwdev_lock(device->cdev)); + device = cqr->startdev; init_waitqueue_head (&wait_q); cqr->callback = dasd_wakeup_cb; cqr->callback_data = (void *) &wait_q; - cqr->status = DASD_CQR_QUEUED; - list_add_tail(&cqr->list, &device->ccw_queue); - - /* let the bh start the request to keep them in order */ - dasd_schedule_bh(device); - - spin_unlock_irq(get_ccwdev_lock(device->cdev)); - + dasd_add_request_tail(cqr); wait_event(wait_q, _wait_for_wakeup(cqr)); /* Request status is either done or failed. */ - rc = (cqr->status == DASD_CQR_FAILED) ? -EIO : 0; + rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO; return rc; } /* - * Attempts to start a special ccw queue and wait interruptible - * for its completion. + * Queue a request to the tail of the device ccw_queue and wait + * interruptible for it's completion. */ -int -dasd_sleep_on_interruptible(struct dasd_ccw_req * cqr) +int dasd_sleep_on_interruptible(struct dasd_ccw_req *cqr) { wait_queue_head_t wait_q; struct dasd_device *device; - int rc, finished; - - device = cqr->device; - spin_lock_irq(get_ccwdev_lock(device->cdev)); + int rc; + device = cqr->startdev; init_waitqueue_head (&wait_q); cqr->callback = dasd_wakeup_cb; cqr->callback_data = (void *) &wait_q; - cqr->status = DASD_CQR_QUEUED; - list_add_tail(&cqr->list, &device->ccw_queue); - - /* let the bh start the request to keep them in order */ - dasd_schedule_bh(device); - spin_unlock_irq(get_ccwdev_lock(device->cdev)); - - finished = 0; - while (!finished) { - rc = wait_event_interruptible(wait_q, _wait_for_wakeup(cqr)); - if (rc != -ERESTARTSYS) { - /* Request is final (done or failed) */ - rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO; - break; - } - spin_lock_irq(get_ccwdev_lock(device->cdev)); - switch (cqr->status) { - case DASD_CQR_IN_IO: - /* terminate runnig cqr */ - if (device->discipline->term_IO) { - cqr->retries = -1; - device->discipline->term_IO(cqr); - /* wait (non-interruptible) for final status - * because signal ist still pending */ - spin_unlock_irq(get_ccwdev_lock(device->cdev)); - wait_event(wait_q, _wait_for_wakeup(cqr)); - spin_lock_irq(get_ccwdev_lock(device->cdev)); - rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO; - finished = 1; - } - break; - case DASD_CQR_QUEUED: - /* request */ - list_del_init(&cqr->list); - rc = -EIO; - finished = 1; - break; - default: - /* cqr with 'non-interruptable' status - just wait */ - break; - } - spin_unlock_irq(get_ccwdev_lock(device->cdev)); + dasd_add_request_tail(cqr); + rc = wait_event_interruptible(wait_q, _wait_for_wakeup(cqr)); + if (rc == -ERESTARTSYS) { + dasd_cancel_req(cqr); + /* wait (non-interruptible) for final status */ + wait_event(wait_q, _wait_for_wakeup(cqr)); } + rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO; return rc; } @@ -1643,25 +1453,23 @@ dasd_sleep_on_interruptible(struct dasd_ccw_req * cqr) * and be put back to status queued, before the special request is added * to the head of the queue. Then the special request is waited on normally. */ -static inline int -_dasd_term_running_cqr(struct dasd_device *device) +static inline int _dasd_term_running_cqr(struct dasd_device *device) { struct dasd_ccw_req *cqr; if (list_empty(&device->ccw_queue)) return 0; - cqr = list_entry(device->ccw_queue.next, struct dasd_ccw_req, list); + cqr = list_entry(device->ccw_queue.next, struct dasd_ccw_req, devlist); return device->discipline->term_IO(cqr); } -int -dasd_sleep_on_immediatly(struct dasd_ccw_req * cqr) +int dasd_sleep_on_immediatly(struct dasd_ccw_req *cqr) { wait_queue_head_t wait_q; struct dasd_device *device; int rc; - device = cqr->device; + device = cqr->startdev; spin_lock_irq(get_ccwdev_lock(device->cdev)); rc = _dasd_term_running_cqr(device); if (rc) { @@ -1673,17 +1481,17 @@ dasd_sleep_on_immediatly(struct dasd_ccw_req * cqr) cqr->callback = dasd_wakeup_cb; cqr->callback_data = (void *) &wait_q; cqr->status = DASD_CQR_QUEUED; - list_add(&cqr->list, &device->ccw_queue); + list_add(&cqr->devlist, &device->ccw_queue); /* let the bh start the request to keep them in order */ - dasd_schedule_bh(device); + dasd_schedule_device_bh(device); spin_unlock_irq(get_ccwdev_lock(device->cdev)); wait_event(wait_q, _wait_for_wakeup(cqr)); /* Request status is either done or failed. */ - rc = (cqr->status == DASD_CQR_FAILED) ? -EIO : 0; + rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO; return rc; } @@ -1692,11 +1500,14 @@ dasd_sleep_on_immediatly(struct dasd_ccw_req * cqr) * This is useful to timeout requests. The request will be * terminated if it is currently in i/o. * Returns 1 if the request has been terminated. + * 0 if there was no need to terminate the request (not started yet) + * negative error code if termination failed + * Cancellation of a request is an asynchronous operation! The calling + * function has to wait until the request is properly returned via callback. */ -int -dasd_cancel_req(struct dasd_ccw_req *cqr) +int dasd_cancel_req(struct dasd_ccw_req *cqr) { - struct dasd_device *device = cqr->device; + struct dasd_device *device = cqr->startdev; unsigned long flags; int rc; @@ -1704,74 +1515,453 @@ dasd_cancel_req(struct dasd_ccw_req *cqr) spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); switch (cqr->status) { case DASD_CQR_QUEUED: - /* request was not started - just set to failed */ - cqr->status = DASD_CQR_FAILED; + /* request was not started - just set to cleared */ + cqr->status = DASD_CQR_CLEARED; break; case DASD_CQR_IN_IO: /* request in IO - terminate IO and release again */ - if (device->discipline->term_IO(cqr) != 0) - /* what to do if unable to terminate ?????? - e.g. not _IN_IO */ - cqr->status = DASD_CQR_FAILED; - cqr->stopclk = get_clock(); - rc = 1; + rc = device->discipline->term_IO(cqr); + if (rc) { + DEV_MESSAGE(KERN_ERR, device, + "dasd_cancel_req is unable " + " to terminate request %p, rc = %d", + cqr, rc); + } else { + cqr->stopclk = get_clock(); + rc = 1; + } break; - case DASD_CQR_DONE: - case DASD_CQR_FAILED: - /* already finished - do nothing */ + default: /* already finished or clear pending - do nothing */ break; - default: - DEV_MESSAGE(KERN_ALERT, device, - "invalid status %02x in request", - cqr->status); + } + spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); + dasd_schedule_device_bh(device); + return rc; +} + + +/* + * SECTION: Operations of the dasd_block layer. + */ + +/* + * Timeout function for dasd_block. This is used when the block layer + * is waiting for something that may not come reliably, (e.g. a state + * change interrupt) + */ +static void dasd_block_timeout(unsigned long ptr) +{ + unsigned long flags; + struct dasd_block *block; + + block = (struct dasd_block *) ptr; + spin_lock_irqsave(get_ccwdev_lock(block->base->cdev), flags); + /* re-activate request queue */ + block->base->stopped &= ~DASD_STOPPED_PENDING; + spin_unlock_irqrestore(get_ccwdev_lock(block->base->cdev), flags); + dasd_schedule_block_bh(block); +} + +/* + * Setup timeout for a dasd_block in jiffies. + */ +void dasd_block_set_timer(struct dasd_block *block, int expires) +{ + if (expires == 0) { + if (timer_pending(&block->timer)) + del_timer(&block->timer); + return; + } + if (timer_pending(&block->timer)) { + if (mod_timer(&block->timer, jiffies + expires)) + return; + } + block->timer.function = dasd_block_timeout; + block->timer.data = (unsigned long) block; + block->timer.expires = jiffies + expires; + add_timer(&block->timer); +} + +/* + * Clear timeout for a dasd_block. + */ +void dasd_block_clear_timer(struct dasd_block *block) +{ + if (timer_pending(&block->timer)) + del_timer(&block->timer); +} + +/* + * posts the buffer_cache about a finalized request + */ +static inline void dasd_end_request(struct request *req, int uptodate) +{ + if (end_that_request_first(req, uptodate, req->hard_nr_sectors)) BUG(); + add_disk_randomness(req->rq_disk); + end_that_request_last(req, uptodate); +} + +/* + * Process finished error recovery ccw. + */ +static inline void __dasd_block_process_erp(struct dasd_block *block, + struct dasd_ccw_req *cqr) +{ + dasd_erp_fn_t erp_fn; + struct dasd_device *device = block->base; + + if (cqr->status == DASD_CQR_DONE) + DBF_DEV_EVENT(DBF_NOTICE, device, "%s", "ERP successful"); + else + DEV_MESSAGE(KERN_ERR, device, "%s", "ERP unsuccessful"); + erp_fn = device->discipline->erp_postaction(cqr); + erp_fn(cqr); +} +/* + * Fetch requests from the block device queue. + */ +static void __dasd_process_request_queue(struct dasd_block *block) +{ + struct request_queue *queue; + struct request *req; + struct dasd_ccw_req *cqr; + struct dasd_device *basedev; + unsigned long flags; + queue = block->request_queue; + basedev = block->base; + /* No queue ? Then there is nothing to do. */ + if (queue == NULL) + return; + + /* + * We requeue request from the block device queue to the ccw + * queue only in two states. In state DASD_STATE_READY the + * partition detection is done and we need to requeue requests + * for that. State DASD_STATE_ONLINE is normal block device + * operation. + */ + if (basedev->state < DASD_STATE_READY) + return; + /* Now we try to fetch requests from the request queue */ + while (!blk_queue_plugged(queue) && + elv_next_request(queue)) { + + req = elv_next_request(queue); + + if (basedev->features & DASD_FEATURE_READONLY && + rq_data_dir(req) == WRITE) { + DBF_DEV_EVENT(DBF_ERR, basedev, + "Rejecting write request %p", + req); + blkdev_dequeue_request(req); + dasd_end_request(req, 0); + continue; + } + cqr = basedev->discipline->build_cp(basedev, block, req); + if (IS_ERR(cqr)) { + if (PTR_ERR(cqr) == -EBUSY) + break; /* normal end condition */ + if (PTR_ERR(cqr) == -ENOMEM) + break; /* terminate request queue loop */ + if (PTR_ERR(cqr) == -EAGAIN) { + /* + * The current request cannot be build right + * now, we have to try later. If this request + * is the head-of-queue we stop the device + * for 1/2 second. + */ + if (!list_empty(&block->ccw_queue)) + break; + spin_lock_irqsave(get_ccwdev_lock(basedev->cdev), flags); + basedev->stopped |= DASD_STOPPED_PENDING; + spin_unlock_irqrestore(get_ccwdev_lock(basedev->cdev), flags); + dasd_block_set_timer(block, HZ/2); + break; + } + DBF_DEV_EVENT(DBF_ERR, basedev, + "CCW creation failed (rc=%ld) " + "on request %p", + PTR_ERR(cqr), req); + blkdev_dequeue_request(req); + dasd_end_request(req, 0); + continue; + } + /* + * Note: callback is set to dasd_return_cqr_cb in + * __dasd_block_start_head to cover erp requests as well + */ + cqr->callback_data = (void *) req; + cqr->status = DASD_CQR_FILLED; + blkdev_dequeue_request(req); + list_add_tail(&cqr->blocklist, &block->ccw_queue); + dasd_profile_start(block, cqr, req); + } +} + +static void __dasd_cleanup_cqr(struct dasd_ccw_req *cqr) +{ + struct request *req; + int status; + + req = (struct request *) cqr->callback_data; + dasd_profile_end(cqr->block, cqr, req); + status = cqr->memdev->discipline->free_cp(cqr, req); + dasd_end_request(req, status); +} + +/* + * Process ccw request queue. + */ +static void __dasd_process_block_ccw_queue(struct dasd_block *block, + struct list_head *final_queue) +{ + struct list_head *l, *n; + struct dasd_ccw_req *cqr; + dasd_erp_fn_t erp_fn; + unsigned long flags; + struct dasd_device *base = block->base; + +restart: + /* Process request with final status. */ + list_for_each_safe(l, n, &block->ccw_queue) { + cqr = list_entry(l, struct dasd_ccw_req, blocklist); + if (cqr->status != DASD_CQR_DONE && + cqr->status != DASD_CQR_FAILED && + cqr->status != DASD_CQR_NEED_ERP && + cqr->status != DASD_CQR_TERMINATED) + continue; + + if (cqr->status == DASD_CQR_TERMINATED) { + base->discipline->handle_terminated_request(cqr); + goto restart; + } + + /* Process requests that may be recovered */ + if (cqr->status == DASD_CQR_NEED_ERP) { + if (cqr->irb.esw.esw0.erw.cons && + test_bit(DASD_CQR_FLAGS_USE_ERP, + &cqr->flags)) { + erp_fn = base->discipline->erp_action(cqr); + erp_fn(cqr); + } + goto restart; + } + + /* First of all call extended error reporting. */ + if (dasd_eer_enabled(base) && + cqr->status == DASD_CQR_FAILED) { + dasd_eer_write(base, cqr, DASD_EER_FATALERROR); + + /* restart request */ + cqr->status = DASD_CQR_FILLED; + cqr->retries = 255; + spin_lock_irqsave(get_ccwdev_lock(base->cdev), flags); + base->stopped |= DASD_STOPPED_QUIESCE; + spin_unlock_irqrestore(get_ccwdev_lock(base->cdev), + flags); + goto restart; + } + + /* Process finished ERP request. */ + if (cqr->refers) { + __dasd_block_process_erp(block, cqr); + goto restart; + } + + /* Rechain finished requests to final queue */ + cqr->endclk = get_clock(); + list_move_tail(&cqr->blocklist, final_queue); + } +} + +static void dasd_return_cqr_cb(struct dasd_ccw_req *cqr, void *data) +{ + dasd_schedule_block_bh(cqr->block); +} + +static void __dasd_block_start_head(struct dasd_block *block) +{ + struct dasd_ccw_req *cqr; + + if (list_empty(&block->ccw_queue)) + return; + /* We allways begin with the first requests on the queue, as some + * of previously started requests have to be enqueued on a + * dasd_device again for error recovery. + */ + list_for_each_entry(cqr, &block->ccw_queue, blocklist) { + if (cqr->status != DASD_CQR_FILLED) + continue; + /* Non-temporary stop condition will trigger fail fast */ + if (block->base->stopped & ~DASD_STOPPED_PENDING && + test_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags) && + (!dasd_eer_enabled(block->base))) { + cqr->status = DASD_CQR_FAILED; + dasd_schedule_block_bh(block); + continue; + } + /* Don't try to start requests if device is stopped */ + if (block->base->stopped) + return; + + /* just a fail safe check, should not happen */ + if (!cqr->startdev) + cqr->startdev = block->base; + + /* make sure that the requests we submit find their way back */ + cqr->callback = dasd_return_cqr_cb; + + dasd_add_request_tail(cqr); + } +} + +/* + * Central dasd_block layer routine. Takes requests from the generic + * block layer request queue, creates ccw requests, enqueues them on + * a dasd_device and processes ccw requests that have been returned. + */ +static void dasd_block_tasklet(struct dasd_block *block) +{ + struct list_head final_queue; + struct list_head *l, *n; + struct dasd_ccw_req *cqr; + + atomic_set(&block->tasklet_scheduled, 0); + INIT_LIST_HEAD(&final_queue); + spin_lock(&block->queue_lock); + /* Finish off requests on ccw queue */ + __dasd_process_block_ccw_queue(block, &final_queue); + spin_unlock(&block->queue_lock); + /* Now call the callback function of requests with final status */ + spin_lock_irq(&block->request_queue_lock); + list_for_each_safe(l, n, &final_queue) { + cqr = list_entry(l, struct dasd_ccw_req, blocklist); + list_del_init(&cqr->blocklist); + __dasd_cleanup_cqr(cqr); + } + spin_lock(&block->queue_lock); + /* Get new request from the block device request queue */ + __dasd_process_request_queue(block); + /* Now check if the head of the ccw queue needs to be started. */ + __dasd_block_start_head(block); + spin_unlock(&block->queue_lock); + spin_unlock_irq(&block->request_queue_lock); + dasd_put_device(block->base); +} + +static void _dasd_wake_block_flush_cb(struct dasd_ccw_req *cqr, void *data) +{ + wake_up(&dasd_flush_wq); +} + +/* + * Go through all request on the dasd_block request queue, cancel them + * on the respective dasd_device, and return them to the generic + * block layer. + */ +static int dasd_flush_block_queue(struct dasd_block *block) +{ + struct dasd_ccw_req *cqr, *n; + int rc, i; + struct list_head flush_queue; + + INIT_LIST_HEAD(&flush_queue); + spin_lock_bh(&block->queue_lock); + rc = 0; +restart: + list_for_each_entry_safe(cqr, n, &block->ccw_queue, blocklist) { + /* if this request currently owned by a dasd_device cancel it */ + if (cqr->status >= DASD_CQR_QUEUED) + rc = dasd_cancel_req(cqr); + if (rc < 0) + break; + /* Rechain request (including erp chain) so it won't be + * touched by the dasd_block_tasklet anymore. + * Replace the callback so we notice when the request + * is returned from the dasd_device layer. + */ + cqr->callback = _dasd_wake_block_flush_cb; + for (i = 0; cqr != NULL; cqr = cqr->refers, i++) + list_move_tail(&cqr->blocklist, &flush_queue); + if (i > 1) + /* moved more than one request - need to restart */ + goto restart; + } + spin_unlock_bh(&block->queue_lock); + /* Now call the callback function of flushed requests */ +restart_cb: + list_for_each_entry_safe(cqr, n, &flush_queue, blocklist) { + wait_event(dasd_flush_wq, (cqr->status < DASD_CQR_QUEUED)); + /* Process finished ERP request. */ + if (cqr->refers) { + __dasd_block_process_erp(block, cqr); + /* restart list_for_xx loop since dasd_process_erp + * might remove multiple elements */ + goto restart_cb; + } + /* call the callback function */ + cqr->endclk = get_clock(); + list_del_init(&cqr->blocklist); + __dasd_cleanup_cqr(cqr); } - spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); - dasd_schedule_bh(device); return rc; } /* - * SECTION: Block device operations (request queue, partitions, open, release). + * Schedules a call to dasd_tasklet over the device tasklet. + */ +void dasd_schedule_block_bh(struct dasd_block *block) +{ + /* Protect against rescheduling. */ + if (atomic_cmpxchg(&block->tasklet_scheduled, 0, 1) != 0) + return; + /* life cycle of block is bound to it's base device */ + dasd_get_device(block->base); + tasklet_hi_schedule(&block->tasklet); +} + + +/* + * SECTION: external block device operations + * (request queue handling, open, release, etc.) */ /* * Dasd request queue function. Called from ll_rw_blk.c */ -static void -do_dasd_request(struct request_queue * queue) +static void do_dasd_request(struct request_queue *queue) { - struct dasd_device *device; + struct dasd_block *block; - device = (struct dasd_device *) queue->queuedata; - spin_lock(get_ccwdev_lock(device->cdev)); + block = queue->queuedata; + spin_lock(&block->queue_lock); /* Get new request from the block device request queue */ - __dasd_process_blk_queue(device); + __dasd_process_request_queue(block); /* Now check if the head of the ccw queue needs to be started. */ - __dasd_start_head(device); - spin_unlock(get_ccwdev_lock(device->cdev)); + __dasd_block_start_head(block); + spin_unlock(&block->queue_lock); } /* * Allocate and initialize request queue and default I/O scheduler. */ -static int -dasd_alloc_queue(struct dasd_device * device) +static int dasd_alloc_queue(struct dasd_block *block) { int rc; - device->request_queue = blk_init_queue(do_dasd_request, - &device->request_queue_lock); - if (device->request_queue == NULL) + block->request_queue = blk_init_queue(do_dasd_request, + &block->request_queue_lock); + if (block->request_queue == NULL) return -ENOMEM; - device->request_queue->queuedata = device; + block->request_queue->queuedata = block; - elevator_exit(device->request_queue->elevator); - rc = elevator_init(device->request_queue, "deadline"); + elevator_exit(block->request_queue->elevator); + rc = elevator_init(block->request_queue, "deadline"); if (rc) { - blk_cleanup_queue(device->request_queue); + blk_cleanup_queue(block->request_queue); return rc; } return 0; @@ -1780,79 +1970,76 @@ dasd_alloc_queue(struct dasd_device * device) /* * Allocate and initialize request queue. */ -static void -dasd_setup_queue(struct dasd_device * device) +static void dasd_setup_queue(struct dasd_block *block) { int max; - blk_queue_hardsect_size(device->request_queue, device->bp_block); - max = device->discipline->max_blocks << device->s2b_shift; - blk_queue_max_sectors(device->request_queue, max); - blk_queue_max_phys_segments(device->request_queue, -1L); - blk_queue_max_hw_segments(device->request_queue, -1L); - blk_queue_max_segment_size(device->request_queue, -1L); - blk_queue_segment_boundary(device->request_queue, -1L); - blk_queue_ordered(device->request_queue, QUEUE_ORDERED_TAG, NULL); + blk_queue_hardsect_size(block->request_queue, block->bp_block); + max = block->base->discipline->max_blocks << block->s2b_shift; + blk_queue_max_sectors(block->request_queue, max); + blk_queue_max_phys_segments(block->request_queue, -1L); + blk_queue_max_hw_segments(block->request_queue, -1L); + blk_queue_max_segment_size(block->request_queue, -1L); + blk_queue_segment_boundary(block->request_queue, -1L); + blk_queue_ordered(block->request_queue, QUEUE_ORDERED_DRAIN, NULL); } /* * Deactivate and free request queue. */ -static void -dasd_free_queue(struct dasd_device * device) +static void dasd_free_queue(struct dasd_block *block) { - if (device->request_queue) { - blk_cleanup_queue(device->request_queue); - device->request_queue = NULL; + if (block->request_queue) { + blk_cleanup_queue(block->request_queue); + block->request_queue = NULL; } } /* * Flush request on the request queue. */ -static void -dasd_flush_request_queue(struct dasd_device * device) +static void dasd_flush_request_queue(struct dasd_block *block) { struct request *req; - if (!device->request_queue) + if (!block->request_queue) return; - spin_lock_irq(&device->request_queue_lock); - while ((req = elv_next_request(device->request_queue))) { + spin_lock_irq(&block->request_queue_lock); + while ((req = elv_next_request(block->request_queue))) { blkdev_dequeue_request(req); dasd_end_request(req, 0); } - spin_unlock_irq(&device->request_queue_lock); + spin_unlock_irq(&block->request_queue_lock); } -static int -dasd_open(struct inode *inp, struct file *filp) +static int dasd_open(struct inode *inp, struct file *filp) { struct gendisk *disk = inp->i_bdev->bd_disk; - struct dasd_device *device = disk->private_data; + struct dasd_block *block = disk->private_data; + struct dasd_device *base = block->base; int rc; - atomic_inc(&device->open_count); - if (test_bit(DASD_FLAG_OFFLINE, &device->flags)) { + atomic_inc(&block->open_count); + if (test_bit(DASD_FLAG_OFFLINE, &base->flags)) { rc = -ENODEV; goto unlock; } - if (!try_module_get(device->discipline->owner)) { + if (!try_module_get(base->discipline->owner)) { rc = -EINVAL; goto unlock; } if (dasd_probeonly) { - DEV_MESSAGE(KERN_INFO, device, "%s", + DEV_MESSAGE(KERN_INFO, base, "%s", "No access to device due to probeonly mode"); rc = -EPERM; goto out; } - if (device->state <= DASD_STATE_BASIC) { - DBF_DEV_EVENT(DBF_ERR, device, " %s", + if (base->state <= DASD_STATE_BASIC) { + DBF_DEV_EVENT(DBF_ERR, base, " %s", " Cannot open unrecognized device"); rc = -ENODEV; goto out; @@ -1861,41 +2048,41 @@ dasd_open(struct inode *inp, struct file *filp) return 0; out: - module_put(device->discipline->owner); + module_put(base->discipline->owner); unlock: - atomic_dec(&device->open_count); + atomic_dec(&block->open_count); return rc; } -static int -dasd_release(struct inode *inp, struct file *filp) +static int dasd_release(struct inode *inp, struct file *filp) { struct gendisk *disk = inp->i_bdev->bd_disk; - struct dasd_device *device = disk->private_data; + struct dasd_block *block = disk->private_data; - atomic_dec(&device->open_count); - module_put(device->discipline->owner); + atomic_dec(&block->open_count); + module_put(block->base->discipline->owner); return 0; } /* * Return disk geometry. */ -static int -dasd_getgeo(struct block_device *bdev, struct hd_geometry *geo) +static int dasd_getgeo(struct block_device *bdev, struct hd_geometry *geo) { - struct dasd_device *device; + struct dasd_block *block; + struct dasd_device *base; - device = bdev->bd_disk->private_data; - if (!device) + block = bdev->bd_disk->private_data; + base = block->base; + if (!block) return -ENODEV; - if (!device->discipline || - !device->discipline->fill_geometry) + if (!base->discipline || + !base->discipline->fill_geometry) return -EINVAL; - device->discipline->fill_geometry(device, geo); - geo->start = get_start_sect(bdev) >> device->s2b_shift; + base->discipline->fill_geometry(block, geo); + geo->start = get_start_sect(bdev) >> block->s2b_shift; return 0; } @@ -1909,6 +2096,9 @@ dasd_device_operations = { .getgeo = dasd_getgeo, }; +/******************************************************************************* + * end of block device operations + */ static void dasd_exit(void) @@ -1937,9 +2127,8 @@ dasd_exit(void) * Initial attempt at a probe function. this can be simplified once * the other detection code is gone. */ -int -dasd_generic_probe (struct ccw_device *cdev, - struct dasd_discipline *discipline) +int dasd_generic_probe(struct ccw_device *cdev, + struct dasd_discipline *discipline) { int ret; @@ -1979,10 +2168,10 @@ dasd_generic_probe (struct ccw_device *cdev, * This will one day be called from a global not_oper handler. * It is also used by driver_unregister during module unload. */ -void -dasd_generic_remove (struct ccw_device *cdev) +void dasd_generic_remove(struct ccw_device *cdev) { struct dasd_device *device; + struct dasd_block *block; cdev->handler = NULL; @@ -2002,7 +2191,15 @@ dasd_generic_remove (struct ccw_device *cdev) */ dasd_set_target_state(device, DASD_STATE_NEW); /* dasd_delete_device destroys the device reference. */ + block = device->block; + device->block = NULL; dasd_delete_device(device); + /* + * life cycle of block is bound to device, so delete it after + * device was safely removed + */ + if (block) + dasd_free_block(block); } /* @@ -2010,10 +2207,8 @@ dasd_generic_remove (struct ccw_device *cdev) * the device is detected for the first time and is supposed to be used * or the user has started activation through sysfs. */ -int -dasd_generic_set_online (struct ccw_device *cdev, - struct dasd_discipline *base_discipline) - +int dasd_generic_set_online(struct ccw_device *cdev, + struct dasd_discipline *base_discipline) { struct dasd_discipline *discipline; struct dasd_device *device; @@ -2049,6 +2244,7 @@ dasd_generic_set_online (struct ccw_device *cdev, device->base_discipline = base_discipline; device->discipline = discipline; + /* check_device will allocate block device if necessary */ rc = discipline->check_device(device); if (rc) { printk (KERN_WARNING @@ -2068,6 +2264,8 @@ dasd_generic_set_online (struct ccw_device *cdev, cdev->dev.bus_id); rc = -ENODEV; dasd_set_target_state(device, DASD_STATE_NEW); + if (device->block) + dasd_free_block(device->block); dasd_delete_device(device); } else pr_debug("dasd_generic device %s found\n", @@ -2082,10 +2280,10 @@ dasd_generic_set_online (struct ccw_device *cdev, return rc; } -int -dasd_generic_set_offline (struct ccw_device *cdev) +int dasd_generic_set_offline(struct ccw_device *cdev) { struct dasd_device *device; + struct dasd_block *block; int max_count, open_count; device = dasd_device_from_cdev(cdev); @@ -2102,30 +2300,39 @@ dasd_generic_set_offline (struct ccw_device *cdev) * the blkdev_get in dasd_scan_partitions. We are only interested * in the other openers. */ - max_count = device->bdev ? 0 : -1; - open_count = (int) atomic_read(&device->open_count); - if (open_count > max_count) { - if (open_count > 0) - printk (KERN_WARNING "Can't offline dasd device with " - "open count = %i.\n", - open_count); - else - printk (KERN_WARNING "%s", - "Can't offline dasd device due to internal " - "use\n"); - clear_bit(DASD_FLAG_OFFLINE, &device->flags); - dasd_put_device(device); - return -EBUSY; + if (device->block) { + struct dasd_block *block = device->block; + max_count = block->bdev ? 0 : -1; + open_count = (int) atomic_read(&block->open_count); + if (open_count > max_count) { + if (open_count > 0) + printk(KERN_WARNING "Can't offline dasd " + "device with open count = %i.\n", + open_count); + else + printk(KERN_WARNING "%s", + "Can't offline dasd device due " + "to internal use\n"); + clear_bit(DASD_FLAG_OFFLINE, &device->flags); + dasd_put_device(device); + return -EBUSY; + } } dasd_set_target_state(device, DASD_STATE_NEW); /* dasd_delete_device destroys the device reference. */ + block = device->block; + device->block = NULL; dasd_delete_device(device); - + /* + * life cycle of block is bound to device, so delete it after + * device was safely removed + */ + if (block) + dasd_free_block(block); return 0; } -int -dasd_generic_notify(struct ccw_device *cdev, int event) +int dasd_generic_notify(struct ccw_device *cdev, int event) { struct dasd_device *device; struct dasd_ccw_req *cqr; @@ -2146,27 +2353,22 @@ dasd_generic_notify(struct ccw_device *cdev, int event) if (device->state < DASD_STATE_BASIC) break; /* Device is active. We want to keep it. */ - if (test_bit(DASD_FLAG_DSC_ERROR, &device->flags)) { - list_for_each_entry(cqr, &device->ccw_queue, list) - if (cqr->status == DASD_CQR_IN_IO) - cqr->status = DASD_CQR_FAILED; - device->stopped |= DASD_STOPPED_DC_EIO; - } else { - list_for_each_entry(cqr, &device->ccw_queue, list) - if (cqr->status == DASD_CQR_IN_IO) { - cqr->status = DASD_CQR_QUEUED; - cqr->retries++; - } - device->stopped |= DASD_STOPPED_DC_WAIT; - dasd_set_timer(device, 0); - } - dasd_schedule_bh(device); + list_for_each_entry(cqr, &device->ccw_queue, devlist) + if (cqr->status == DASD_CQR_IN_IO) { + cqr->status = DASD_CQR_QUEUED; + cqr->retries++; + } + device->stopped |= DASD_STOPPED_DC_WAIT; + dasd_device_clear_timer(device); + dasd_schedule_device_bh(device); ret = 1; break; case CIO_OPER: /* FIXME: add a sanity check. */ - device->stopped &= ~(DASD_STOPPED_DC_WAIT|DASD_STOPPED_DC_EIO); - dasd_schedule_bh(device); + device->stopped &= ~DASD_STOPPED_DC_WAIT; + dasd_schedule_device_bh(device); + if (device->block) + dasd_schedule_block_bh(device->block); ret = 1; break; } @@ -2196,7 +2398,8 @@ static struct dasd_ccw_req *dasd_generic_build_rdc(struct dasd_device *device, ccw->cda = (__u32)(addr_t)rdc_buffer; ccw->count = rdc_buffer_size; - cqr->device = device; + cqr->startdev = device; + cqr->memdev = device; cqr->expires = 10*HZ; clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags); cqr->retries = 2; @@ -2218,13 +2421,12 @@ int dasd_generic_read_dev_chars(struct dasd_device *device, char *magic, return PTR_ERR(cqr); ret = dasd_sleep_on(cqr); - dasd_sfree_request(cqr, cqr->device); + dasd_sfree_request(cqr, cqr->memdev); return ret; } EXPORT_SYMBOL_GPL(dasd_generic_read_dev_chars); -static int __init -dasd_init(void) +static int __init dasd_init(void) { int rc; @@ -2232,7 +2434,7 @@ dasd_init(void) init_waitqueue_head(&dasd_flush_wq); /* register 'common' DASD debug area, used for all DBF_XXX calls */ - dasd_debug_area = debug_register("dasd", 1, 2, 8 * sizeof (long)); + dasd_debug_area = debug_register("dasd", 1, 2, 8 * sizeof(long)); if (dasd_debug_area == NULL) { rc = -ENOMEM; goto failed; @@ -2278,15 +2480,18 @@ EXPORT_SYMBOL(dasd_diag_discipline_pointer); EXPORT_SYMBOL(dasd_add_request_head); EXPORT_SYMBOL(dasd_add_request_tail); EXPORT_SYMBOL(dasd_cancel_req); -EXPORT_SYMBOL(dasd_clear_timer); +EXPORT_SYMBOL(dasd_device_clear_timer); +EXPORT_SYMBOL(dasd_block_clear_timer); EXPORT_SYMBOL(dasd_enable_device); EXPORT_SYMBOL(dasd_int_handler); EXPORT_SYMBOL(dasd_kfree_request); EXPORT_SYMBOL(dasd_kick_device); EXPORT_SYMBOL(dasd_kmalloc_request); -EXPORT_SYMBOL(dasd_schedule_bh); +EXPORT_SYMBOL(dasd_schedule_device_bh); +EXPORT_SYMBOL(dasd_schedule_block_bh); EXPORT_SYMBOL(dasd_set_target_state); -EXPORT_SYMBOL(dasd_set_timer); +EXPORT_SYMBOL(dasd_device_set_timer); +EXPORT_SYMBOL(dasd_block_set_timer); EXPORT_SYMBOL(dasd_sfree_request); EXPORT_SYMBOL(dasd_sleep_on); EXPORT_SYMBOL(dasd_sleep_on_immediatly); @@ -2300,4 +2505,7 @@ EXPORT_SYMBOL_GPL(dasd_generic_remove); EXPORT_SYMBOL_GPL(dasd_generic_notify); EXPORT_SYMBOL_GPL(dasd_generic_set_online); EXPORT_SYMBOL_GPL(dasd_generic_set_offline); - +EXPORT_SYMBOL_GPL(dasd_generic_handle_state_change); +EXPORT_SYMBOL_GPL(dasd_flush_device_queue); +EXPORT_SYMBOL_GPL(dasd_alloc_block); +EXPORT_SYMBOL_GPL(dasd_free_block); diff --git a/drivers/s390/block/dasd_3370_erp.c b/drivers/s390/block/dasd_3370_erp.c deleted file mode 100644 index 1ddab8991d92..000000000000 --- a/drivers/s390/block/dasd_3370_erp.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * File...........: linux/drivers/s390/block/dasd_3370_erp.c - * Author(s)......: Holger Smolinski - * Bugreports.to..: - * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 2000 - * - */ - -#define PRINTK_HEADER "dasd_erp(3370)" - -#include "dasd_int.h" - - -/* - * DASD_3370_ERP_EXAMINE - * - * DESCRIPTION - * Checks only for fatal/no/recover error. - * A detailed examination of the sense data is done later outside - * the interrupt handler. - * - * The logic is based on the 'IBM 3880 Storage Control Reference' manual - * 'Chapter 7. 3370 Sense Data'. - * - * RETURN VALUES - * dasd_era_none no error - * dasd_era_fatal for all fatal (unrecoverable errors) - * dasd_era_recover for all others. - */ -dasd_era_t -dasd_3370_erp_examine(struct dasd_ccw_req * cqr, struct irb * irb) -{ - char *sense = irb->ecw; - - /* check for successful execution first */ - if (irb->scsw.cstat == 0x00 && - irb->scsw.dstat == (DEV_STAT_CHN_END | DEV_STAT_DEV_END)) - return dasd_era_none; - if (sense[0] & 0x80) { /* CMD reject */ - return dasd_era_fatal; - } - if (sense[0] & 0x40) { /* Drive offline */ - return dasd_era_recover; - } - if (sense[0] & 0x20) { /* Bus out parity */ - return dasd_era_recover; - } - if (sense[0] & 0x10) { /* equipment check */ - if (sense[1] & 0x80) { - return dasd_era_fatal; - } - return dasd_era_recover; - } - if (sense[0] & 0x08) { /* data check */ - if (sense[1] & 0x80) { - return dasd_era_fatal; - } - return dasd_era_recover; - } - if (sense[0] & 0x04) { /* overrun */ - if (sense[1] & 0x80) { - return dasd_era_fatal; - } - return dasd_era_recover; - } - if (sense[1] & 0x40) { /* invalid blocksize */ - return dasd_era_fatal; - } - if (sense[1] & 0x04) { /* file protected */ - return dasd_era_recover; - } - if (sense[1] & 0x01) { /* operation incomplete */ - return dasd_era_recover; - } - if (sense[2] & 0x80) { /* check data erroor */ - return dasd_era_recover; - } - if (sense[2] & 0x10) { /* Env. data present */ - return dasd_era_recover; - } - /* examine the 24 byte sense data */ - return dasd_era_recover; - -} /* END dasd_3370_erp_examine */ diff --git a/drivers/s390/block/dasd_3990_erp.c b/drivers/s390/block/dasd_3990_erp.c index c02f960eae15..c361ab69ec00 100644 --- a/drivers/s390/block/dasd_3990_erp.c +++ b/drivers/s390/block/dasd_3990_erp.c @@ -24,158 +24,6 @@ struct DCTL_data { unsigned short res; /* reserved */ } __attribute__ ((packed)); -/* - ***************************************************************************** - * SECTION ERP EXAMINATION - ***************************************************************************** - */ - -/* - * DASD_3990_ERP_EXAMINE_24 - * - * DESCRIPTION - * Checks only for fatal (unrecoverable) error. - * A detailed examination of the sense data is done later outside - * the interrupt handler. - * - * Each bit configuration leading to an action code 2 (Exit with - * programming error or unusual condition indication) - * are handled as fatal errors. - * - * All other configurations are handled as recoverable errors. - * - * RETURN VALUES - * dasd_era_fatal for all fatal (unrecoverable errors) - * dasd_era_recover for all others. - */ -static dasd_era_t -dasd_3990_erp_examine_24(struct dasd_ccw_req * cqr, char *sense) -{ - - struct dasd_device *device = cqr->device; - - /* check for 'Command Reject' */ - if ((sense[0] & SNS0_CMD_REJECT) && - (!(sense[2] & SNS2_ENV_DATA_PRESENT))) { - - DEV_MESSAGE(KERN_ERR, device, "%s", - "EXAMINE 24: Command Reject detected - " - "fatal error"); - - return dasd_era_fatal; - } - - /* check for 'Invalid Track Format' */ - if ((sense[1] & SNS1_INV_TRACK_FORMAT) && - (!(sense[2] & SNS2_ENV_DATA_PRESENT))) { - - DEV_MESSAGE(KERN_ERR, device, "%s", - "EXAMINE 24: Invalid Track Format detected " - "- fatal error"); - - return dasd_era_fatal; - } - - /* check for 'No Record Found' */ - if (sense[1] & SNS1_NO_REC_FOUND) { - - /* FIXME: fatal error ?!? */ - DEV_MESSAGE(KERN_ERR, device, - "EXAMINE 24: No Record Found detected %s", - device->state <= DASD_STATE_BASIC ? - " " : "- fatal error"); - - return dasd_era_fatal; - } - - /* return recoverable for all others */ - return dasd_era_recover; -} /* END dasd_3990_erp_examine_24 */ - -/* - * DASD_3990_ERP_EXAMINE_32 - * - * DESCRIPTION - * Checks only for fatal/no/recoverable error. - * A detailed examination of the sense data is done later outside - * the interrupt handler. - * - * RETURN VALUES - * dasd_era_none no error - * dasd_era_fatal for all fatal (unrecoverable errors) - * dasd_era_recover for recoverable others. - */ -static dasd_era_t -dasd_3990_erp_examine_32(struct dasd_ccw_req * cqr, char *sense) -{ - - struct dasd_device *device = cqr->device; - - switch (sense[25]) { - case 0x00: - return dasd_era_none; - - case 0x01: - DEV_MESSAGE(KERN_ERR, device, "%s", "EXAMINE 32: fatal error"); - - return dasd_era_fatal; - - default: - - return dasd_era_recover; - } - -} /* end dasd_3990_erp_examine_32 */ - -/* - * DASD_3990_ERP_EXAMINE - * - * DESCRIPTION - * Checks only for fatal/no/recover error. - * A detailed examination of the sense data is done later outside - * the interrupt handler. - * - * The logic is based on the 'IBM 3990 Storage Control Reference' manual - * 'Chapter 7. Error Recovery Procedures'. - * - * RETURN VALUES - * dasd_era_none no error - * dasd_era_fatal for all fatal (unrecoverable errors) - * dasd_era_recover for all others. - */ -dasd_era_t -dasd_3990_erp_examine(struct dasd_ccw_req * cqr, struct irb * irb) -{ - - char *sense = irb->ecw; - dasd_era_t era = dasd_era_recover; - struct dasd_device *device = cqr->device; - - /* check for successful execution first */ - if (irb->scsw.cstat == 0x00 && - irb->scsw.dstat == (DEV_STAT_CHN_END | DEV_STAT_DEV_END)) - return dasd_era_none; - - /* distinguish between 24 and 32 byte sense data */ - if (sense[27] & DASD_SENSE_BIT_0) { - - era = dasd_3990_erp_examine_24(cqr, sense); - - } else { - - era = dasd_3990_erp_examine_32(cqr, sense); - - } - - /* log the erp chain if fatal error occurred */ - if ((era == dasd_era_fatal) && (device->state >= DASD_STATE_READY)) { - dasd_log_sense(cqr, irb); - } - - return era; - -} /* END dasd_3990_erp_examine */ - /* ***************************************************************************** * SECTION ERP HANDLING @@ -206,7 +54,7 @@ dasd_3990_erp_cleanup(struct dasd_ccw_req * erp, char final_status) { struct dasd_ccw_req *cqr = erp->refers; - dasd_free_erp_request(erp, erp->device); + dasd_free_erp_request(erp, erp->memdev); cqr->status = final_status; return cqr; @@ -224,15 +72,17 @@ static void dasd_3990_erp_block_queue(struct dasd_ccw_req * erp, int expires) { - struct dasd_device *device = erp->device; + struct dasd_device *device = erp->startdev; + unsigned long flags; DEV_MESSAGE(KERN_INFO, device, "blocking request queue for %is", expires/HZ); + spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); device->stopped |= DASD_STOPPED_PENDING; - erp->status = DASD_CQR_QUEUED; - - dasd_set_timer(device, expires); + spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); + erp->status = DASD_CQR_FILLED; + dasd_block_set_timer(device->block, expires); } /* @@ -251,7 +101,7 @@ static struct dasd_ccw_req * dasd_3990_erp_int_req(struct dasd_ccw_req * erp) { - struct dasd_device *device = erp->device; + struct dasd_device *device = erp->startdev; /* first time set initial retry counter and erp_function */ /* and retry once without blocking queue */ @@ -292,11 +142,14 @@ dasd_3990_erp_int_req(struct dasd_ccw_req * erp) static void dasd_3990_erp_alternate_path(struct dasd_ccw_req * erp) { - struct dasd_device *device = erp->device; + struct dasd_device *device = erp->startdev; __u8 opm; + unsigned long flags; /* try alternate valid path */ + spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); opm = ccw_device_get_path_mask(device->cdev); + spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); //FIXME: start with get_opm ? if (erp->lpm == 0) erp->lpm = LPM_ANYPATH & ~(erp->irb.esw.esw0.sublog.lpum); @@ -309,9 +162,8 @@ dasd_3990_erp_alternate_path(struct dasd_ccw_req * erp) "try alternate lpm=%x (lpum=%x / opm=%x)", erp->lpm, erp->irb.esw.esw0.sublog.lpum, opm); - /* reset status to queued to handle the request again... */ - if (erp->status > DASD_CQR_QUEUED) - erp->status = DASD_CQR_QUEUED; + /* reset status to submit the request again... */ + erp->status = DASD_CQR_FILLED; erp->retries = 1; } else { DEV_MESSAGE(KERN_ERR, device, @@ -320,8 +172,7 @@ dasd_3990_erp_alternate_path(struct dasd_ccw_req * erp) erp->irb.esw.esw0.sublog.lpum, opm); /* post request with permanent error */ - if (erp->status > DASD_CQR_QUEUED) - erp->status = DASD_CQR_FAILED; + erp->status = DASD_CQR_FAILED; } } /* end dasd_3990_erp_alternate_path */ @@ -344,14 +195,14 @@ static struct dasd_ccw_req * dasd_3990_erp_DCTL(struct dasd_ccw_req * erp, char modifier) { - struct dasd_device *device = erp->device; + struct dasd_device *device = erp->startdev; struct DCTL_data *DCTL_data; struct ccw1 *ccw; struct dasd_ccw_req *dctl_cqr; dctl_cqr = dasd_alloc_erp_request((char *) &erp->magic, 1, - sizeof (struct DCTL_data), - erp->device); + sizeof(struct DCTL_data), + device); if (IS_ERR(dctl_cqr)) { DEV_MESSAGE(KERN_ERR, device, "%s", "Unable to allocate DCTL-CQR"); @@ -365,13 +216,14 @@ dasd_3990_erp_DCTL(struct dasd_ccw_req * erp, char modifier) DCTL_data->modifier = modifier; ccw = dctl_cqr->cpaddr; - memset(ccw, 0, sizeof (struct ccw1)); + memset(ccw, 0, sizeof(struct ccw1)); ccw->cmd_code = CCW_CMD_DCTL; ccw->count = 4; ccw->cda = (__u32)(addr_t) DCTL_data; dctl_cqr->function = dasd_3990_erp_DCTL; dctl_cqr->refers = erp; - dctl_cqr->device = erp->device; + dctl_cqr->startdev = device; + dctl_cqr->memdev = device; dctl_cqr->magic = erp->magic; dctl_cqr->expires = 5 * 60 * HZ; dctl_cqr->retries = 2; @@ -435,7 +287,7 @@ static struct dasd_ccw_req * dasd_3990_erp_action_4(struct dasd_ccw_req * erp, char *sense) { - struct dasd_device *device = erp->device; + struct dasd_device *device = erp->startdev; /* first time set initial retry counter and erp_function */ /* and retry once without waiting for state change pending */ @@ -472,7 +324,7 @@ dasd_3990_erp_action_4(struct dasd_ccw_req * erp, char *sense) "redriving request immediately, " "%d retries left", erp->retries); - erp->status = DASD_CQR_QUEUED; + erp->status = DASD_CQR_FILLED; } } @@ -530,7 +382,7 @@ static void dasd_3990_handle_env_data(struct dasd_ccw_req * erp, char *sense) { - struct dasd_device *device = erp->device; + struct dasd_device *device = erp->startdev; char msg_format = (sense[7] & 0xF0); char msg_no = (sense[7] & 0x0F); @@ -1157,7 +1009,7 @@ static struct dasd_ccw_req * dasd_3990_erp_com_rej(struct dasd_ccw_req * erp, char *sense) { - struct dasd_device *device = erp->device; + struct dasd_device *device = erp->startdev; erp->function = dasd_3990_erp_com_rej; @@ -1198,7 +1050,7 @@ static struct dasd_ccw_req * dasd_3990_erp_bus_out(struct dasd_ccw_req * erp) { - struct dasd_device *device = erp->device; + struct dasd_device *device = erp->startdev; /* first time set initial retry counter and erp_function */ /* and retry once without blocking queue */ @@ -1237,7 +1089,7 @@ static struct dasd_ccw_req * dasd_3990_erp_equip_check(struct dasd_ccw_req * erp, char *sense) { - struct dasd_device *device = erp->device; + struct dasd_device *device = erp->startdev; erp->function = dasd_3990_erp_equip_check; @@ -1279,7 +1131,6 @@ dasd_3990_erp_equip_check(struct dasd_ccw_req * erp, char *sense) erp = dasd_3990_erp_action_5(erp); } - return erp; } /* end dasd_3990_erp_equip_check */ @@ -1299,7 +1150,7 @@ static struct dasd_ccw_req * dasd_3990_erp_data_check(struct dasd_ccw_req * erp, char *sense) { - struct dasd_device *device = erp->device; + struct dasd_device *device = erp->startdev; erp->function = dasd_3990_erp_data_check; @@ -1358,7 +1209,7 @@ static struct dasd_ccw_req * dasd_3990_erp_overrun(struct dasd_ccw_req * erp, char *sense) { - struct dasd_device *device = erp->device; + struct dasd_device *device = erp->startdev; erp->function = dasd_3990_erp_overrun; @@ -1387,7 +1238,7 @@ static struct dasd_ccw_req * dasd_3990_erp_inv_format(struct dasd_ccw_req * erp, char *sense) { - struct dasd_device *device = erp->device; + struct dasd_device *device = erp->startdev; erp->function = dasd_3990_erp_inv_format; @@ -1403,8 +1254,7 @@ dasd_3990_erp_inv_format(struct dasd_ccw_req * erp, char *sense) } else { DEV_MESSAGE(KERN_ERR, device, "%s", - "Invalid Track Format - Fatal error should have " - "been handled within the interrupt handler"); + "Invalid Track Format - Fatal error"); erp = dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED); } @@ -1428,7 +1278,7 @@ static struct dasd_ccw_req * dasd_3990_erp_EOC(struct dasd_ccw_req * default_erp, char *sense) { - struct dasd_device *device = default_erp->device; + struct dasd_device *device = default_erp->startdev; DEV_MESSAGE(KERN_ERR, device, "%s", "End-of-Cylinder - must never happen"); @@ -1453,7 +1303,7 @@ static struct dasd_ccw_req * dasd_3990_erp_env_data(struct dasd_ccw_req * erp, char *sense) { - struct dasd_device *device = erp->device; + struct dasd_device *device = erp->startdev; erp->function = dasd_3990_erp_env_data; @@ -1463,11 +1313,9 @@ dasd_3990_erp_env_data(struct dasd_ccw_req * erp, char *sense) /* don't retry on disabled interface */ if (sense[7] != 0x0F) { - erp = dasd_3990_erp_action_4(erp, sense); } else { - - erp = dasd_3990_erp_cleanup(erp, DASD_CQR_IN_IO); + erp->status = DASD_CQR_FILLED; } return erp; @@ -1490,11 +1338,10 @@ static struct dasd_ccw_req * dasd_3990_erp_no_rec(struct dasd_ccw_req * default_erp, char *sense) { - struct dasd_device *device = default_erp->device; + struct dasd_device *device = default_erp->startdev; DEV_MESSAGE(KERN_ERR, device, "%s", - "No Record Found - Fatal error should " - "have been handled within the interrupt handler"); + "No Record Found - Fatal error "); return dasd_3990_erp_cleanup(default_erp, DASD_CQR_FAILED); @@ -1517,7 +1364,7 @@ static struct dasd_ccw_req * dasd_3990_erp_file_prot(struct dasd_ccw_req * erp) { - struct dasd_device *device = erp->device; + struct dasd_device *device = erp->startdev; DEV_MESSAGE(KERN_ERR, device, "%s", "File Protected"); @@ -1525,6 +1372,43 @@ dasd_3990_erp_file_prot(struct dasd_ccw_req * erp) } /* end dasd_3990_erp_file_prot */ +/* + * DASD_3990_ERP_INSPECT_ALIAS + * + * DESCRIPTION + * Checks if the original request was started on an alias device. + * If yes, it modifies the original and the erp request so that + * the erp request can be started on a base device. + * + * PARAMETER + * erp pointer to the currently created default ERP + * + * RETURN VALUES + * erp pointer to the modified ERP, or NULL + */ + +static struct dasd_ccw_req *dasd_3990_erp_inspect_alias( + struct dasd_ccw_req *erp) +{ + struct dasd_ccw_req *cqr = erp->refers; + + if (cqr->block && + (cqr->block->base != cqr->startdev)) { + if (cqr->startdev->features & DASD_FEATURE_ERPLOG) { + DEV_MESSAGE(KERN_ERR, cqr->startdev, + "ERP on alias device for request %p," + " recover on base device %s", cqr, + cqr->block->base->cdev->dev.bus_id); + } + dasd_eckd_reset_ccw_to_base_io(cqr); + erp->startdev = cqr->block->base; + erp->function = dasd_3990_erp_inspect_alias; + return erp; + } else + return NULL; +} + + /* * DASD_3990_ERP_INSPECT_24 * @@ -1623,7 +1507,7 @@ static struct dasd_ccw_req * dasd_3990_erp_action_10_32(struct dasd_ccw_req * erp, char *sense) { - struct dasd_device *device = erp->device; + struct dasd_device *device = erp->startdev; erp->retries = 256; erp->function = dasd_3990_erp_action_10_32; @@ -1657,13 +1541,14 @@ static struct dasd_ccw_req * dasd_3990_erp_action_1B_32(struct dasd_ccw_req * default_erp, char *sense) { - struct dasd_device *device = default_erp->device; + struct dasd_device *device = default_erp->startdev; __u32 cpa = 0; struct dasd_ccw_req *cqr; struct dasd_ccw_req *erp; struct DE_eckd_data *DE_data; + struct PFX_eckd_data *PFX_data; char *LO_data; /* LO_eckd_data_t */ - struct ccw1 *ccw; + struct ccw1 *ccw, *oldccw; DEV_MESSAGE(KERN_DEBUG, device, "%s", "Write not finished because of unexpected condition"); @@ -1702,8 +1587,8 @@ dasd_3990_erp_action_1B_32(struct dasd_ccw_req * default_erp, char *sense) /* Build new ERP request including DE/LO */ erp = dasd_alloc_erp_request((char *) &cqr->magic, 2 + 1,/* DE/LO + TIC */ - sizeof (struct DE_eckd_data) + - sizeof (struct LO_eckd_data), device); + sizeof(struct DE_eckd_data) + + sizeof(struct LO_eckd_data), device); if (IS_ERR(erp)) { DEV_MESSAGE(KERN_ERR, device, "%s", "Unable to allocate ERP"); @@ -1712,10 +1597,16 @@ dasd_3990_erp_action_1B_32(struct dasd_ccw_req * default_erp, char *sense) /* use original DE */ DE_data = erp->data; - memcpy(DE_data, cqr->data, sizeof (struct DE_eckd_data)); + oldccw = cqr->cpaddr; + if (oldccw->cmd_code == DASD_ECKD_CCW_PFX) { + PFX_data = cqr->data; + memcpy(DE_data, &PFX_data->define_extend, + sizeof(struct DE_eckd_data)); + } else + memcpy(DE_data, cqr->data, sizeof(struct DE_eckd_data)); /* create LO */ - LO_data = erp->data + sizeof (struct DE_eckd_data); + LO_data = erp->data + sizeof(struct DE_eckd_data); if ((sense[3] == 0x01) && (LO_data[1] & 0x01)) { @@ -1748,7 +1639,7 @@ dasd_3990_erp_action_1B_32(struct dasd_ccw_req * default_erp, char *sense) /* create DE ccw */ ccw = erp->cpaddr; - memset(ccw, 0, sizeof (struct ccw1)); + memset(ccw, 0, sizeof(struct ccw1)); ccw->cmd_code = DASD_ECKD_CCW_DEFINE_EXTENT; ccw->flags = CCW_FLAG_CC; ccw->count = 16; @@ -1756,7 +1647,7 @@ dasd_3990_erp_action_1B_32(struct dasd_ccw_req * default_erp, char *sense) /* create LO ccw */ ccw++; - memset(ccw, 0, sizeof (struct ccw1)); + memset(ccw, 0, sizeof(struct ccw1)); ccw->cmd_code = DASD_ECKD_CCW_LOCATE_RECORD; ccw->flags = CCW_FLAG_CC; ccw->count = 16; @@ -1770,7 +1661,8 @@ dasd_3990_erp_action_1B_32(struct dasd_ccw_req * default_erp, char *sense) /* fill erp related fields */ erp->function = dasd_3990_erp_action_1B_32; erp->refers = default_erp->refers; - erp->device = device; + erp->startdev = device; + erp->memdev = device; erp->magic = default_erp->magic; erp->expires = 0; erp->retries = 256; @@ -1803,7 +1695,7 @@ static struct dasd_ccw_req * dasd_3990_update_1B(struct dasd_ccw_req * previous_erp, char *sense) { - struct dasd_device *device = previous_erp->device; + struct dasd_device *device = previous_erp->startdev; __u32 cpa = 0; struct dasd_ccw_req *cqr; struct dasd_ccw_req *erp; @@ -1827,7 +1719,7 @@ dasd_3990_update_1B(struct dasd_ccw_req * previous_erp, char *sense) DEV_MESSAGE(KERN_DEBUG, device, "%s", "Imprecise ending is set - just retry"); - previous_erp->status = DASD_CQR_QUEUED; + previous_erp->status = DASD_CQR_FILLED; return previous_erp; } @@ -1850,7 +1742,7 @@ dasd_3990_update_1B(struct dasd_ccw_req * previous_erp, char *sense) erp = previous_erp; /* update the LO with the new returned sense data */ - LO_data = erp->data + sizeof (struct DE_eckd_data); + LO_data = erp->data + sizeof(struct DE_eckd_data); if ((sense[3] == 0x01) && (LO_data[1] & 0x01)) { @@ -1889,7 +1781,7 @@ dasd_3990_update_1B(struct dasd_ccw_req * previous_erp, char *sense) ccw++; /* addr of TIC ccw */ ccw->cda = cpa; - erp->status = DASD_CQR_QUEUED; + erp->status = DASD_CQR_FILLED; return erp; @@ -1968,9 +1860,7 @@ dasd_3990_erp_compound_path(struct dasd_ccw_req * erp, char *sense) * try further actions. */ erp->lpm = 0; - - erp->status = DASD_CQR_ERROR; - + erp->status = DASD_CQR_NEED_ERP; } } @@ -2047,7 +1937,7 @@ dasd_3990_erp_compound_config(struct dasd_ccw_req * erp, char *sense) if ((sense[25] & DASD_SENSE_BIT_1) && (sense[26] & DASD_SENSE_BIT_2)) { /* set to suspended duplex state then restart */ - struct dasd_device *device = erp->device; + struct dasd_device *device = erp->startdev; DEV_MESSAGE(KERN_ERR, device, "%s", "Set device to suspended duplex state should be " @@ -2081,28 +1971,26 @@ dasd_3990_erp_compound(struct dasd_ccw_req * erp, char *sense) { if ((erp->function == dasd_3990_erp_compound_retry) && - (erp->status == DASD_CQR_ERROR)) { + (erp->status == DASD_CQR_NEED_ERP)) { dasd_3990_erp_compound_path(erp, sense); } if ((erp->function == dasd_3990_erp_compound_path) && - (erp->status == DASD_CQR_ERROR)) { + (erp->status == DASD_CQR_NEED_ERP)) { erp = dasd_3990_erp_compound_code(erp, sense); } if ((erp->function == dasd_3990_erp_compound_code) && - (erp->status == DASD_CQR_ERROR)) { + (erp->status == DASD_CQR_NEED_ERP)) { dasd_3990_erp_compound_config(erp, sense); } /* if no compound action ERP specified, the request failed */ - if (erp->status == DASD_CQR_ERROR) { - + if (erp->status == DASD_CQR_NEED_ERP) erp->status = DASD_CQR_FAILED; - } return erp; @@ -2127,7 +2015,7 @@ static struct dasd_ccw_req * dasd_3990_erp_inspect_32(struct dasd_ccw_req * erp, char *sense) { - struct dasd_device *device = erp->device; + struct dasd_device *device = erp->startdev; erp->function = dasd_3990_erp_inspect_32; @@ -2149,8 +2037,7 @@ dasd_3990_erp_inspect_32(struct dasd_ccw_req * erp, char *sense) case 0x01: /* fatal error */ DEV_MESSAGE(KERN_ERR, device, "%s", - "Fatal error should have been " - "handled within the interrupt handler"); + "Retry not recommended - Fatal error"); erp = dasd_3990_erp_cleanup(erp, DASD_CQR_FAILED); break; @@ -2253,6 +2140,11 @@ dasd_3990_erp_inspect(struct dasd_ccw_req * erp) /* already set up new ERP ! */ char *sense = erp->refers->irb.ecw; + /* if this problem occured on an alias retry on base */ + erp_new = dasd_3990_erp_inspect_alias(erp); + if (erp_new) + return erp_new; + /* distinguish between 24 and 32 byte sense data */ if (sense[27] & DASD_SENSE_BIT_0) { @@ -2287,13 +2179,13 @@ static struct dasd_ccw_req * dasd_3990_erp_add_erp(struct dasd_ccw_req * cqr) { - struct dasd_device *device = cqr->device; + struct dasd_device *device = cqr->startdev; struct ccw1 *ccw; /* allocate additional request block */ struct dasd_ccw_req *erp; - erp = dasd_alloc_erp_request((char *) &cqr->magic, 2, 0, cqr->device); + erp = dasd_alloc_erp_request((char *) &cqr->magic, 2, 0, device); if (IS_ERR(erp)) { if (cqr->retries <= 0) { DEV_MESSAGE(KERN_ERR, device, "%s", @@ -2305,7 +2197,7 @@ dasd_3990_erp_add_erp(struct dasd_ccw_req * cqr) "Unable to allocate ERP request " "(%i retries left)", cqr->retries); - dasd_set_timer(device, (HZ << 3)); + dasd_block_set_timer(device->block, (HZ << 3)); } return cqr; } @@ -2319,7 +2211,9 @@ dasd_3990_erp_add_erp(struct dasd_ccw_req * cqr) ccw->cda = (long)(cqr->cpaddr); erp->function = dasd_3990_erp_add_erp; erp->refers = cqr; - erp->device = cqr->device; + erp->startdev = device; + erp->memdev = device; + erp->block = cqr->block; erp->magic = cqr->magic; erp->expires = 0; erp->retries = 256; @@ -2466,7 +2360,7 @@ static struct dasd_ccw_req * dasd_3990_erp_further_erp(struct dasd_ccw_req *erp) { - struct dasd_device *device = erp->device; + struct dasd_device *device = erp->startdev; char *sense = erp->irb.ecw; /* check for 24 byte sense ERP */ @@ -2557,7 +2451,7 @@ dasd_3990_erp_handle_match_erp(struct dasd_ccw_req *erp_head, struct dasd_ccw_req *erp) { - struct dasd_device *device = erp_head->device; + struct dasd_device *device = erp_head->startdev; struct dasd_ccw_req *erp_done = erp_head; /* finished req */ struct dasd_ccw_req *erp_free = NULL; /* req to be freed */ @@ -2569,13 +2463,13 @@ dasd_3990_erp_handle_match_erp(struct dasd_ccw_req *erp_head, "original request was lost\n"); /* remove the request from the device queue */ - list_del(&erp_done->list); + list_del(&erp_done->blocklist); erp_free = erp_done; erp_done = erp_done->refers; /* free the finished erp request */ - dasd_free_erp_request(erp_free, erp_free->device); + dasd_free_erp_request(erp_free, erp_free->memdev); } /* end while */ @@ -2603,7 +2497,7 @@ dasd_3990_erp_handle_match_erp(struct dasd_ccw_req *erp_head, erp->retries, erp); /* handle the request again... */ - erp->status = DASD_CQR_QUEUED; + erp->status = DASD_CQR_FILLED; } } else { @@ -2636,9 +2530,8 @@ dasd_3990_erp_handle_match_erp(struct dasd_ccw_req *erp_head, struct dasd_ccw_req * dasd_3990_erp_action(struct dasd_ccw_req * cqr) { - struct dasd_ccw_req *erp = NULL; - struct dasd_device *device = cqr->device; + struct dasd_device *device = cqr->startdev; struct dasd_ccw_req *temp_erp = NULL; if (device->features & DASD_FEATURE_ERPLOG) { @@ -2704,10 +2597,11 @@ dasd_3990_erp_action(struct dasd_ccw_req * cqr) } } - /* enqueue added ERP request */ - if (erp->status == DASD_CQR_FILLED) { - erp->status = DASD_CQR_QUEUED; - list_add(&erp->list, &device->ccw_queue); + /* enqueue ERP request if it's a new one */ + if (list_empty(&erp->blocklist)) { + cqr->status = DASD_CQR_IN_ERP; + /* add erp request before the cqr */ + list_add_tail(&erp->blocklist, &cqr->blocklist); } return erp; diff --git a/drivers/s390/block/dasd_9336_erp.c b/drivers/s390/block/dasd_9336_erp.c deleted file mode 100644 index 6e082688475a..000000000000 --- a/drivers/s390/block/dasd_9336_erp.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * File...........: linux/drivers/s390/block/dasd_9336_erp.c - * Author(s)......: Holger Smolinski - * Bugreports.to..: - * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 2000 - * - */ - -#define PRINTK_HEADER "dasd_erp(9336)" - -#include "dasd_int.h" - - -/* - * DASD_9336_ERP_EXAMINE - * - * DESCRIPTION - * Checks only for fatal/no/recover error. - * A detailed examination of the sense data is done later outside - * the interrupt handler. - * - * The logic is based on the 'IBM 3880 Storage Control Reference' manual - * 'Chapter 7. 9336 Sense Data'. - * - * RETURN VALUES - * dasd_era_none no error - * dasd_era_fatal for all fatal (unrecoverable errors) - * dasd_era_recover for all others. - */ -dasd_era_t -dasd_9336_erp_examine(struct dasd_ccw_req * cqr, struct irb * irb) -{ - /* check for successful execution first */ - if (irb->scsw.cstat == 0x00 && - irb->scsw.dstat == (DEV_STAT_CHN_END | DEV_STAT_DEV_END)) - return dasd_era_none; - - /* examine the 24 byte sense data */ - return dasd_era_recover; - -} /* END dasd_9336_erp_examine */ diff --git a/drivers/s390/block/dasd_9343_erp.c b/drivers/s390/block/dasd_9343_erp.c deleted file mode 100644 index ddecb9808ed4..000000000000 --- a/drivers/s390/block/dasd_9343_erp.c +++ /dev/null @@ -1,21 +0,0 @@ -/* - * File...........: linux/drivers/s390/block/dasd_9345_erp.c - * Author(s)......: Holger Smolinski - * Bugreports.to..: - * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 2000 - * - */ - -#define PRINTK_HEADER "dasd_erp(9343)" - -#include "dasd_int.h" - -dasd_era_t -dasd_9343_erp_examine(struct dasd_ccw_req * cqr, struct irb * irb) -{ - if (irb->scsw.cstat == 0x00 && - irb->scsw.dstat == (DEV_STAT_CHN_END | DEV_STAT_DEV_END)) - return dasd_era_none; - - return dasd_era_recover; -} diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c new file mode 100644 index 000000000000..3a40bee9d358 --- /dev/null +++ b/drivers/s390/block/dasd_alias.c @@ -0,0 +1,903 @@ +/* + * PAV alias management for the DASD ECKD discipline + * + * Copyright IBM Corporation, 2007 + * Author(s): Stefan Weinhuber + */ + +#include +#include +#include "dasd_int.h" +#include "dasd_eckd.h" + +#ifdef PRINTK_HEADER +#undef PRINTK_HEADER +#endif /* PRINTK_HEADER */ +#define PRINTK_HEADER "dasd(eckd):" + + +/* + * General concept of alias management: + * - PAV and DASD alias management is specific to the eckd discipline. + * - A device is connected to an lcu as long as the device exists. + * dasd_alias_make_device_known_to_lcu will be called wenn the + * device is checked by the eckd discipline and + * dasd_alias_disconnect_device_from_lcu will be called + * before the device is deleted. + * - The dasd_alias_add_device / dasd_alias_remove_device + * functions mark the point when a device is 'ready for service'. + * - A summary unit check is a rare occasion, but it is mandatory to + * support it. It requires some complex recovery actions before the + * devices can be used again (see dasd_alias_handle_summary_unit_check). + * - dasd_alias_get_start_dev will find an alias device that can be used + * instead of the base device and does some (very simple) load balancing. + * This is the function that gets called for each I/O, so when improving + * something, this function should get faster or better, the rest has just + * to be correct. + */ + + +static void summary_unit_check_handling_work(struct work_struct *); +static void lcu_update_work(struct work_struct *); +static int _schedule_lcu_update(struct alias_lcu *, struct dasd_device *); + +static struct alias_root aliastree = { + .serverlist = LIST_HEAD_INIT(aliastree.serverlist), + .lock = __SPIN_LOCK_UNLOCKED(aliastree.lock), +}; + +static struct alias_server *_find_server(struct dasd_uid *uid) +{ + struct alias_server *pos; + list_for_each_entry(pos, &aliastree.serverlist, server) { + if (!strncmp(pos->uid.vendor, uid->vendor, + sizeof(uid->vendor)) + && !strncmp(pos->uid.serial, uid->serial, + sizeof(uid->serial))) + return pos; + }; + return NULL; +} + +static struct alias_lcu *_find_lcu(struct alias_server *server, + struct dasd_uid *uid) +{ + struct alias_lcu *pos; + list_for_each_entry(pos, &server->lculist, lcu) { + if (pos->uid.ssid == uid->ssid) + return pos; + }; + return NULL; +} + +static struct alias_pav_group *_find_group(struct alias_lcu *lcu, + struct dasd_uid *uid) +{ + struct alias_pav_group *pos; + __u8 search_unit_addr; + + /* for hyper pav there is only one group */ + if (lcu->pav == HYPER_PAV) { + if (list_empty(&lcu->grouplist)) + return NULL; + else + return list_first_entry(&lcu->grouplist, + struct alias_pav_group, group); + } + + /* for base pav we have to find the group that matches the base */ + if (uid->type == UA_BASE_DEVICE) + search_unit_addr = uid->real_unit_addr; + else + search_unit_addr = uid->base_unit_addr; + list_for_each_entry(pos, &lcu->grouplist, group) { + if (pos->uid.base_unit_addr == search_unit_addr) + return pos; + }; + return NULL; +} + +static struct alias_server *_allocate_server(struct dasd_uid *uid) +{ + struct alias_server *server; + + server = kzalloc(sizeof(*server), GFP_KERNEL); + if (!server) + return ERR_PTR(-ENOMEM); + memcpy(server->uid.vendor, uid->vendor, sizeof(uid->vendor)); + memcpy(server->uid.serial, uid->serial, sizeof(uid->serial)); + INIT_LIST_HEAD(&server->server); + INIT_LIST_HEAD(&server->lculist); + return server; +} + +static void _free_server(struct alias_server *server) +{ + kfree(server); +} + +static struct alias_lcu *_allocate_lcu(struct dasd_uid *uid) +{ + struct alias_lcu *lcu; + + lcu = kzalloc(sizeof(*lcu), GFP_KERNEL); + if (!lcu) + return ERR_PTR(-ENOMEM); + lcu->uac = kzalloc(sizeof(*(lcu->uac)), GFP_KERNEL | GFP_DMA); + if (!lcu->uac) + goto out_err1; + lcu->rsu_cqr = kzalloc(sizeof(*lcu->rsu_cqr), GFP_KERNEL | GFP_DMA); + if (!lcu->rsu_cqr) + goto out_err2; + lcu->rsu_cqr->cpaddr = kzalloc(sizeof(struct ccw1), + GFP_KERNEL | GFP_DMA); + if (!lcu->rsu_cqr->cpaddr) + goto out_err3; + lcu->rsu_cqr->data = kzalloc(16, GFP_KERNEL | GFP_DMA); + if (!lcu->rsu_cqr->data) + goto out_err4; + + memcpy(lcu->uid.vendor, uid->vendor, sizeof(uid->vendor)); + memcpy(lcu->uid.serial, uid->serial, sizeof(uid->serial)); + lcu->uid.ssid = uid->ssid; + lcu->pav = NO_PAV; + lcu->flags = NEED_UAC_UPDATE | UPDATE_PENDING; + INIT_LIST_HEAD(&lcu->lcu); + INIT_LIST_HEAD(&lcu->inactive_devices); + INIT_LIST_HEAD(&lcu->active_devices); + INIT_LIST_HEAD(&lcu->grouplist); + INIT_WORK(&lcu->suc_data.worker, summary_unit_check_handling_work); + INIT_DELAYED_WORK(&lcu->ruac_data.dwork, lcu_update_work); + spin_lock_init(&lcu->lock); + return lcu; + +out_err4: + kfree(lcu->rsu_cqr->cpaddr); +out_err3: + kfree(lcu->rsu_cqr); +out_err2: + kfree(lcu->uac); +out_err1: + kfree(lcu); + return ERR_PTR(-ENOMEM); +} + +static void _free_lcu(struct alias_lcu *lcu) +{ + kfree(lcu->rsu_cqr->data); + kfree(lcu->rsu_cqr->cpaddr); + kfree(lcu->rsu_cqr); + kfree(lcu->uac); + kfree(lcu); +} + +/* + * This is the function that will allocate all the server and lcu data, + * so this function must be called first for a new device. + * If the return value is 1, the lcu was already known before, if it + * is 0, this is a new lcu. + * Negative return code indicates that something went wrong (e.g. -ENOMEM) + */ +int dasd_alias_make_device_known_to_lcu(struct dasd_device *device) +{ + struct dasd_eckd_private *private; + unsigned long flags; + struct alias_server *server, *newserver; + struct alias_lcu *lcu, *newlcu; + int is_lcu_known; + struct dasd_uid *uid; + + private = (struct dasd_eckd_private *) device->private; + uid = &private->uid; + spin_lock_irqsave(&aliastree.lock, flags); + is_lcu_known = 1; + server = _find_server(uid); + if (!server) { + spin_unlock_irqrestore(&aliastree.lock, flags); + newserver = _allocate_server(uid); + if (IS_ERR(newserver)) + return PTR_ERR(newserver); + spin_lock_irqsave(&aliastree.lock, flags); + server = _find_server(uid); + if (!server) { + list_add(&newserver->server, &aliastree.serverlist); + server = newserver; + is_lcu_known = 0; + } else { + /* someone was faster */ + _free_server(newserver); + } + } + + lcu = _find_lcu(server, uid); + if (!lcu) { + spin_unlock_irqrestore(&aliastree.lock, flags); + newlcu = _allocate_lcu(uid); + if (IS_ERR(newlcu)) + return PTR_ERR(lcu); + spin_lock_irqsave(&aliastree.lock, flags); + lcu = _find_lcu(server, uid); + if (!lcu) { + list_add(&newlcu->lcu, &server->lculist); + lcu = newlcu; + is_lcu_known = 0; + } else { + /* someone was faster */ + _free_lcu(newlcu); + } + is_lcu_known = 0; + } + spin_lock(&lcu->lock); + list_add(&device->alias_list, &lcu->inactive_devices); + private->lcu = lcu; + spin_unlock(&lcu->lock); + spin_unlock_irqrestore(&aliastree.lock, flags); + + return is_lcu_known; +} + +/* + * This function removes a device from the scope of alias management. + * The complicated part is to make sure that it is not in use by + * any of the workers. If necessary cancel the work. + */ +void dasd_alias_disconnect_device_from_lcu(struct dasd_device *device) +{ + struct dasd_eckd_private *private; + unsigned long flags; + struct alias_lcu *lcu; + struct alias_server *server; + int was_pending; + + private = (struct dasd_eckd_private *) device->private; + lcu = private->lcu; + spin_lock_irqsave(&lcu->lock, flags); + list_del_init(&device->alias_list); + /* make sure that the workers don't use this device */ + if (device == lcu->suc_data.device) { + spin_unlock_irqrestore(&lcu->lock, flags); + cancel_work_sync(&lcu->suc_data.worker); + spin_lock_irqsave(&lcu->lock, flags); + if (device == lcu->suc_data.device) + lcu->suc_data.device = NULL; + } + was_pending = 0; + if (device == lcu->ruac_data.device) { + spin_unlock_irqrestore(&lcu->lock, flags); + was_pending = 1; + cancel_delayed_work_sync(&lcu->ruac_data.dwork); + spin_lock_irqsave(&lcu->lock, flags); + if (device == lcu->ruac_data.device) + lcu->ruac_data.device = NULL; + } + private->lcu = NULL; + spin_unlock_irqrestore(&lcu->lock, flags); + + spin_lock_irqsave(&aliastree.lock, flags); + spin_lock(&lcu->lock); + if (list_empty(&lcu->grouplist) && + list_empty(&lcu->active_devices) && + list_empty(&lcu->inactive_devices)) { + list_del(&lcu->lcu); + spin_unlock(&lcu->lock); + _free_lcu(lcu); + lcu = NULL; + } else { + if (was_pending) + _schedule_lcu_update(lcu, NULL); + spin_unlock(&lcu->lock); + } + server = _find_server(&private->uid); + if (server && list_empty(&server->lculist)) { + list_del(&server->server); + _free_server(server); + } + spin_unlock_irqrestore(&aliastree.lock, flags); +} + +/* + * This function assumes that the unit address configuration stored + * in the lcu is up to date and will update the device uid before + * adding it to a pav group. + */ +static int _add_device_to_lcu(struct alias_lcu *lcu, + struct dasd_device *device) +{ + + struct dasd_eckd_private *private; + struct alias_pav_group *group; + struct dasd_uid *uid; + + private = (struct dasd_eckd_private *) device->private; + uid = &private->uid; + uid->type = lcu->uac->unit[uid->real_unit_addr].ua_type; + uid->base_unit_addr = lcu->uac->unit[uid->real_unit_addr].base_ua; + dasd_set_uid(device->cdev, &private->uid); + + /* if we have no PAV anyway, we don't need to bother with PAV groups */ + if (lcu->pav == NO_PAV) { + list_move(&device->alias_list, &lcu->active_devices); + return 0; + } + + group = _find_group(lcu, uid); + if (!group) { + group = kzalloc(sizeof(*group), GFP_ATOMIC); + if (!group) + return -ENOMEM; + memcpy(group->uid.vendor, uid->vendor, sizeof(uid->vendor)); + memcpy(group->uid.serial, uid->serial, sizeof(uid->serial)); + group->uid.ssid = uid->ssid; + if (uid->type == UA_BASE_DEVICE) + group->uid.base_unit_addr = uid->real_unit_addr; + else + group->uid.base_unit_addr = uid->base_unit_addr; + INIT_LIST_HEAD(&group->group); + INIT_LIST_HEAD(&group->baselist); + INIT_LIST_HEAD(&group->aliaslist); + list_add(&group->group, &lcu->grouplist); + } + if (uid->type == UA_BASE_DEVICE) + list_move(&device->alias_list, &group->baselist); + else + list_move(&device->alias_list, &group->aliaslist); + private->pavgroup = group; + return 0; +}; + +static void _remove_device_from_lcu(struct alias_lcu *lcu, + struct dasd_device *device) +{ + struct dasd_eckd_private *private; + struct alias_pav_group *group; + + private = (struct dasd_eckd_private *) device->private; + list_move(&device->alias_list, &lcu->inactive_devices); + group = private->pavgroup; + if (!group) + return; + private->pavgroup = NULL; + if (list_empty(&group->baselist) && list_empty(&group->aliaslist)) { + list_del(&group->group); + kfree(group); + return; + } + if (group->next == device) + group->next = NULL; +}; + +static int read_unit_address_configuration(struct dasd_device *device, + struct alias_lcu *lcu) +{ + struct dasd_psf_prssd_data *prssdp; + struct dasd_ccw_req *cqr; + struct ccw1 *ccw; + int rc; + unsigned long flags; + + cqr = dasd_kmalloc_request("ECKD", + 1 /* PSF */ + 1 /* RSSD */ , + (sizeof(struct dasd_psf_prssd_data)), + device); + if (IS_ERR(cqr)) + return PTR_ERR(cqr); + cqr->startdev = device; + cqr->memdev = device; + clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags); + cqr->retries = 10; + cqr->expires = 20 * HZ; + + /* Prepare for Read Subsystem Data */ + prssdp = (struct dasd_psf_prssd_data *) cqr->data; + memset(prssdp, 0, sizeof(struct dasd_psf_prssd_data)); + prssdp->order = PSF_ORDER_PRSSD; + prssdp->suborder = 0x0e; /* Read unit address configuration */ + /* all other bytes of prssdp must be zero */ + + ccw = cqr->cpaddr; + ccw->cmd_code = DASD_ECKD_CCW_PSF; + ccw->count = sizeof(struct dasd_psf_prssd_data); + ccw->flags |= CCW_FLAG_CC; + ccw->cda = (__u32)(addr_t) prssdp; + + /* Read Subsystem Data - feature codes */ + memset(lcu->uac, 0, sizeof(*(lcu->uac))); + + ccw++; + ccw->cmd_code = DASD_ECKD_CCW_RSSD; + ccw->count = sizeof(*(lcu->uac)); + ccw->cda = (__u32)(addr_t) lcu->uac; + + cqr->buildclk = get_clock(); + cqr->status = DASD_CQR_FILLED; + + /* need to unset flag here to detect race with summary unit check */ + spin_lock_irqsave(&lcu->lock, flags); + lcu->flags &= ~NEED_UAC_UPDATE; + spin_unlock_irqrestore(&lcu->lock, flags); + + do { + rc = dasd_sleep_on(cqr); + } while (rc && (cqr->retries > 0)); + if (rc) { + spin_lock_irqsave(&lcu->lock, flags); + lcu->flags |= NEED_UAC_UPDATE; + spin_unlock_irqrestore(&lcu->lock, flags); + } + dasd_kfree_request(cqr, cqr->memdev); + return rc; +} + +static int _lcu_update(struct dasd_device *refdev, struct alias_lcu *lcu) +{ + unsigned long flags; + struct alias_pav_group *pavgroup, *tempgroup; + struct dasd_device *device, *tempdev; + int i, rc; + struct dasd_eckd_private *private; + + spin_lock_irqsave(&lcu->lock, flags); + list_for_each_entry_safe(pavgroup, tempgroup, &lcu->grouplist, group) { + list_for_each_entry_safe(device, tempdev, &pavgroup->baselist, + alias_list) { + list_move(&device->alias_list, &lcu->active_devices); + private = (struct dasd_eckd_private *) device->private; + private->pavgroup = NULL; + } + list_for_each_entry_safe(device, tempdev, &pavgroup->aliaslist, + alias_list) { + list_move(&device->alias_list, &lcu->active_devices); + private = (struct dasd_eckd_private *) device->private; + private->pavgroup = NULL; + } + list_del(&pavgroup->group); + kfree(pavgroup); + } + spin_unlock_irqrestore(&lcu->lock, flags); + + rc = read_unit_address_configuration(refdev, lcu); + if (rc) + return rc; + + spin_lock_irqsave(&lcu->lock, flags); + lcu->pav = NO_PAV; + for (i = 0; i < MAX_DEVICES_PER_LCU; ++i) { + switch (lcu->uac->unit[i].ua_type) { + case UA_BASE_PAV_ALIAS: + lcu->pav = BASE_PAV; + break; + case UA_HYPER_PAV_ALIAS: + lcu->pav = HYPER_PAV; + break; + } + if (lcu->pav != NO_PAV) + break; + } + + list_for_each_entry_safe(device, tempdev, &lcu->active_devices, + alias_list) { + _add_device_to_lcu(lcu, device); + } + spin_unlock_irqrestore(&lcu->lock, flags); + return 0; +} + +static void lcu_update_work(struct work_struct *work) +{ + struct alias_lcu *lcu; + struct read_uac_work_data *ruac_data; + struct dasd_device *device; + unsigned long flags; + int rc; + + ruac_data = container_of(work, struct read_uac_work_data, dwork.work); + lcu = container_of(ruac_data, struct alias_lcu, ruac_data); + device = ruac_data->device; + rc = _lcu_update(device, lcu); + /* + * Need to check flags again, as there could have been another + * prepare_update or a new device a new device while we were still + * processing the data + */ + spin_lock_irqsave(&lcu->lock, flags); + if (rc || (lcu->flags & NEED_UAC_UPDATE)) { + DEV_MESSAGE(KERN_WARNING, device, "could not update" + " alias data in lcu (rc = %d), retry later", rc); + schedule_delayed_work(&lcu->ruac_data.dwork, 30*HZ); + } else { + lcu->ruac_data.device = NULL; + lcu->flags &= ~UPDATE_PENDING; + } + spin_unlock_irqrestore(&lcu->lock, flags); +} + +static int _schedule_lcu_update(struct alias_lcu *lcu, + struct dasd_device *device) +{ + struct dasd_device *usedev = NULL; + struct alias_pav_group *group; + + lcu->flags |= NEED_UAC_UPDATE; + if (lcu->ruac_data.device) { + /* already scheduled or running */ + return 0; + } + if (device && !list_empty(&device->alias_list)) + usedev = device; + + if (!usedev && !list_empty(&lcu->grouplist)) { + group = list_first_entry(&lcu->grouplist, + struct alias_pav_group, group); + if (!list_empty(&group->baselist)) + usedev = list_first_entry(&group->baselist, + struct dasd_device, + alias_list); + else if (!list_empty(&group->aliaslist)) + usedev = list_first_entry(&group->aliaslist, + struct dasd_device, + alias_list); + } + if (!usedev && !list_empty(&lcu->active_devices)) { + usedev = list_first_entry(&lcu->active_devices, + struct dasd_device, alias_list); + } + /* + * if we haven't found a proper device yet, give up for now, the next + * device that will be set active will trigger an lcu update + */ + if (!usedev) + return -EINVAL; + lcu->ruac_data.device = usedev; + schedule_delayed_work(&lcu->ruac_data.dwork, 0); + return 0; +} + +int dasd_alias_add_device(struct dasd_device *device) +{ + struct dasd_eckd_private *private; + struct alias_lcu *lcu; + unsigned long flags; + int rc; + + private = (struct dasd_eckd_private *) device->private; + lcu = private->lcu; + rc = 0; + spin_lock_irqsave(&lcu->lock, flags); + if (!(lcu->flags & UPDATE_PENDING)) { + rc = _add_device_to_lcu(lcu, device); + if (rc) + lcu->flags |= UPDATE_PENDING; + } + if (lcu->flags & UPDATE_PENDING) { + list_move(&device->alias_list, &lcu->active_devices); + _schedule_lcu_update(lcu, device); + } + spin_unlock_irqrestore(&lcu->lock, flags); + return rc; +} + +int dasd_alias_remove_device(struct dasd_device *device) +{ + struct dasd_eckd_private *private; + struct alias_lcu *lcu; + unsigned long flags; + + private = (struct dasd_eckd_private *) device->private; + lcu = private->lcu; + spin_lock_irqsave(&lcu->lock, flags); + _remove_device_from_lcu(lcu, device); + spin_unlock_irqrestore(&lcu->lock, flags); + return 0; +} + +struct dasd_device *dasd_alias_get_start_dev(struct dasd_device *base_device) +{ + + struct dasd_device *alias_device; + struct alias_pav_group *group; + struct alias_lcu *lcu; + struct dasd_eckd_private *private, *alias_priv; + unsigned long flags; + + private = (struct dasd_eckd_private *) base_device->private; + group = private->pavgroup; + lcu = private->lcu; + if (!group || !lcu) + return NULL; + if (lcu->pav == NO_PAV || + lcu->flags & (NEED_UAC_UPDATE | UPDATE_PENDING)) + return NULL; + + spin_lock_irqsave(&lcu->lock, flags); + alias_device = group->next; + if (!alias_device) { + if (list_empty(&group->aliaslist)) { + spin_unlock_irqrestore(&lcu->lock, flags); + return NULL; + } else { + alias_device = list_first_entry(&group->aliaslist, + struct dasd_device, + alias_list); + } + } + if (list_is_last(&alias_device->alias_list, &group->aliaslist)) + group->next = list_first_entry(&group->aliaslist, + struct dasd_device, alias_list); + else + group->next = list_first_entry(&alias_device->alias_list, + struct dasd_device, alias_list); + spin_unlock_irqrestore(&lcu->lock, flags); + alias_priv = (struct dasd_eckd_private *) alias_device->private; + if ((alias_priv->count < private->count) && !alias_device->stopped) + return alias_device; + else + return NULL; +} + +/* + * Summary unit check handling depends on the way alias devices + * are handled so it is done here rather then in dasd_eckd.c + */ +static int reset_summary_unit_check(struct alias_lcu *lcu, + struct dasd_device *device, + char reason) +{ + struct dasd_ccw_req *cqr; + int rc = 0; + + cqr = lcu->rsu_cqr; + strncpy((char *) &cqr->magic, "ECKD", 4); + ASCEBC((char *) &cqr->magic, 4); + cqr->cpaddr->cmd_code = DASD_ECKD_CCW_RSCK; + cqr->cpaddr->flags = 0 ; + cqr->cpaddr->count = 16; + cqr->cpaddr->cda = (__u32)(addr_t) cqr->data; + ((char *)cqr->data)[0] = reason; + + clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags); + cqr->retries = 255; /* set retry counter to enable basic ERP */ + cqr->startdev = device; + cqr->memdev = device; + cqr->block = NULL; + cqr->expires = 5 * HZ; + cqr->buildclk = get_clock(); + cqr->status = DASD_CQR_FILLED; + + rc = dasd_sleep_on_immediatly(cqr); + return rc; +} + +static void _restart_all_base_devices_on_lcu(struct alias_lcu *lcu) +{ + struct alias_pav_group *pavgroup; + struct dasd_device *device; + struct dasd_eckd_private *private; + + /* active and inactive list can contain alias as well as base devices */ + list_for_each_entry(device, &lcu->active_devices, alias_list) { + private = (struct dasd_eckd_private *) device->private; + if (private->uid.type != UA_BASE_DEVICE) + continue; + dasd_schedule_block_bh(device->block); + dasd_schedule_device_bh(device); + } + list_for_each_entry(device, &lcu->inactive_devices, alias_list) { + private = (struct dasd_eckd_private *) device->private; + if (private->uid.type != UA_BASE_DEVICE) + continue; + dasd_schedule_block_bh(device->block); + dasd_schedule_device_bh(device); + } + list_for_each_entry(pavgroup, &lcu->grouplist, group) { + list_for_each_entry(device, &pavgroup->baselist, alias_list) { + dasd_schedule_block_bh(device->block); + dasd_schedule_device_bh(device); + } + } +} + +static void flush_all_alias_devices_on_lcu(struct alias_lcu *lcu) +{ + struct alias_pav_group *pavgroup; + struct dasd_device *device, *temp; + struct dasd_eckd_private *private; + int rc; + unsigned long flags; + LIST_HEAD(active); + + /* + * Problem here ist that dasd_flush_device_queue may wait + * for termination of a request to complete. We can't keep + * the lcu lock during that time, so we must assume that + * the lists may have changed. + * Idea: first gather all active alias devices in a separate list, + * then flush the first element of this list unlocked, and afterwards + * check if it is still on the list before moving it to the + * active_devices list. + */ + + spin_lock_irqsave(&lcu->lock, flags); + list_for_each_entry_safe(device, temp, &lcu->active_devices, + alias_list) { + private = (struct dasd_eckd_private *) device->private; + if (private->uid.type == UA_BASE_DEVICE) + continue; + list_move(&device->alias_list, &active); + } + + list_for_each_entry(pavgroup, &lcu->grouplist, group) { + list_splice_init(&pavgroup->aliaslist, &active); + } + while (!list_empty(&active)) { + device = list_first_entry(&active, struct dasd_device, + alias_list); + spin_unlock_irqrestore(&lcu->lock, flags); + rc = dasd_flush_device_queue(device); + spin_lock_irqsave(&lcu->lock, flags); + /* + * only move device around if it wasn't moved away while we + * were waiting for the flush + */ + if (device == list_first_entry(&active, + struct dasd_device, alias_list)) + list_move(&device->alias_list, &lcu->active_devices); + } + spin_unlock_irqrestore(&lcu->lock, flags); +} + +/* + * This function is called in interrupt context, so the + * cdev lock for device is already locked! + */ +static void _stop_all_devices_on_lcu(struct alias_lcu *lcu, + struct dasd_device *device) +{ + struct alias_pav_group *pavgroup; + struct dasd_device *pos; + + list_for_each_entry(pos, &lcu->active_devices, alias_list) { + if (pos != device) + spin_lock(get_ccwdev_lock(pos->cdev)); + pos->stopped |= DASD_STOPPED_SU; + if (pos != device) + spin_unlock(get_ccwdev_lock(pos->cdev)); + } + list_for_each_entry(pos, &lcu->inactive_devices, alias_list) { + if (pos != device) + spin_lock(get_ccwdev_lock(pos->cdev)); + pos->stopped |= DASD_STOPPED_SU; + if (pos != device) + spin_unlock(get_ccwdev_lock(pos->cdev)); + } + list_for_each_entry(pavgroup, &lcu->grouplist, group) { + list_for_each_entry(pos, &pavgroup->baselist, alias_list) { + if (pos != device) + spin_lock(get_ccwdev_lock(pos->cdev)); + pos->stopped |= DASD_STOPPED_SU; + if (pos != device) + spin_unlock(get_ccwdev_lock(pos->cdev)); + } + list_for_each_entry(pos, &pavgroup->aliaslist, alias_list) { + if (pos != device) + spin_lock(get_ccwdev_lock(pos->cdev)); + pos->stopped |= DASD_STOPPED_SU; + if (pos != device) + spin_unlock(get_ccwdev_lock(pos->cdev)); + } + } +} + +static void _unstop_all_devices_on_lcu(struct alias_lcu *lcu) +{ + struct alias_pav_group *pavgroup; + struct dasd_device *device; + unsigned long flags; + + list_for_each_entry(device, &lcu->active_devices, alias_list) { + spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); + device->stopped &= ~DASD_STOPPED_SU; + spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); + } + + list_for_each_entry(device, &lcu->inactive_devices, alias_list) { + spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); + device->stopped &= ~DASD_STOPPED_SU; + spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); + } + + list_for_each_entry(pavgroup, &lcu->grouplist, group) { + list_for_each_entry(device, &pavgroup->baselist, alias_list) { + spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); + device->stopped &= ~DASD_STOPPED_SU; + spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), + flags); + } + list_for_each_entry(device, &pavgroup->aliaslist, alias_list) { + spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); + device->stopped &= ~DASD_STOPPED_SU; + spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), + flags); + } + } +} + +static void summary_unit_check_handling_work(struct work_struct *work) +{ + struct alias_lcu *lcu; + struct summary_unit_check_work_data *suc_data; + unsigned long flags; + struct dasd_device *device; + + suc_data = container_of(work, struct summary_unit_check_work_data, + worker); + lcu = container_of(suc_data, struct alias_lcu, suc_data); + device = suc_data->device; + + /* 1. flush alias devices */ + flush_all_alias_devices_on_lcu(lcu); + + /* 2. reset summary unit check */ + spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); + device->stopped &= ~(DASD_STOPPED_SU | DASD_STOPPED_PENDING); + spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); + reset_summary_unit_check(lcu, device, suc_data->reason); + + spin_lock_irqsave(&lcu->lock, flags); + _unstop_all_devices_on_lcu(lcu); + _restart_all_base_devices_on_lcu(lcu); + /* 3. read new alias configuration */ + _schedule_lcu_update(lcu, device); + lcu->suc_data.device = NULL; + spin_unlock_irqrestore(&lcu->lock, flags); +} + +/* + * note: this will be called from int handler context (cdev locked) + */ +void dasd_alias_handle_summary_unit_check(struct dasd_device *device, + struct irb *irb) +{ + struct alias_lcu *lcu; + char reason; + struct dasd_eckd_private *private; + + private = (struct dasd_eckd_private *) device->private; + + reason = irb->ecw[8]; + DEV_MESSAGE(KERN_WARNING, device, "%s %x", + "eckd handle summary unit check: reason", reason); + + lcu = private->lcu; + if (!lcu) { + DEV_MESSAGE(KERN_WARNING, device, "%s", + "device not ready to handle summary" + " unit check (no lcu structure)"); + return; + } + spin_lock(&lcu->lock); + _stop_all_devices_on_lcu(lcu, device); + /* prepare for lcu_update */ + private->lcu->flags |= NEED_UAC_UPDATE | UPDATE_PENDING; + /* If this device is about to be removed just return and wait for + * the next interrupt on a different device + */ + if (list_empty(&device->alias_list)) { + DEV_MESSAGE(KERN_WARNING, device, "%s", + "device is in offline processing," + " don't do summary unit check handling"); + spin_unlock(&lcu->lock); + return; + } + if (lcu->suc_data.device) { + /* already scheduled or running */ + DEV_MESSAGE(KERN_WARNING, device, "%s", + "previous instance of summary unit check worker" + " still pending"); + spin_unlock(&lcu->lock); + return ; + } + lcu->suc_data.reason = reason; + lcu->suc_data.device = device; + spin_unlock(&lcu->lock); + schedule_work(&lcu->suc_data.worker); +}; diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c index 0c67258fb9ec..f4fb40257348 100644 --- a/drivers/s390/block/dasd_devmap.c +++ b/drivers/s390/block/dasd_devmap.c @@ -48,22 +48,6 @@ struct dasd_devmap { struct dasd_uid uid; }; -/* - * dasd_server_ssid_map contains a globally unique storage server subsystem ID. - * dasd_server_ssid_list contains the list of all subsystem IDs accessed by - * the DASD device driver. - */ -struct dasd_server_ssid_map { - struct list_head list; - struct system_id { - char vendor[4]; - char serial[15]; - __u16 ssid; - } sid; -}; - -static struct list_head dasd_server_ssid_list; - /* * Parameter parsing functions for dasd= parameter. The syntax is: * : (0x)?[0-9a-fA-F]+ @@ -721,8 +705,9 @@ dasd_ro_store(struct device *dev, struct device_attribute *attr, devmap->features &= ~DASD_FEATURE_READONLY; if (devmap->device) devmap->device->features = devmap->features; - if (devmap->device && devmap->device->gdp) - set_disk_ro(devmap->device->gdp, val); + if (devmap->device && devmap->device->block + && devmap->device->block->gdp) + set_disk_ro(devmap->device->block->gdp, val); spin_unlock(&dasd_devmap_lock); return count; } @@ -893,12 +878,16 @@ dasd_alias_show(struct device *dev, struct device_attribute *attr, char *buf) devmap = dasd_find_busid(dev->bus_id); spin_lock(&dasd_devmap_lock); - if (!IS_ERR(devmap)) - alias = devmap->uid.alias; + if (IS_ERR(devmap) || strlen(devmap->uid.vendor) == 0) { + spin_unlock(&dasd_devmap_lock); + return sprintf(buf, "0\n"); + } + if (devmap->uid.type == UA_BASE_PAV_ALIAS || + devmap->uid.type == UA_HYPER_PAV_ALIAS) + alias = 1; else alias = 0; spin_unlock(&dasd_devmap_lock); - return sprintf(buf, alias ? "1\n" : "0\n"); } @@ -930,19 +919,36 @@ static ssize_t dasd_uid_show(struct device *dev, struct device_attribute *attr, char *buf) { struct dasd_devmap *devmap; - char uid[UID_STRLEN]; + char uid_string[UID_STRLEN]; + char ua_string[3]; + struct dasd_uid *uid; devmap = dasd_find_busid(dev->bus_id); spin_lock(&dasd_devmap_lock); - if (!IS_ERR(devmap) && strlen(devmap->uid.vendor) > 0) - snprintf(uid, sizeof(uid), "%s.%s.%04x.%02x", - devmap->uid.vendor, devmap->uid.serial, - devmap->uid.ssid, devmap->uid.unit_addr); - else - uid[0] = 0; + if (IS_ERR(devmap) || strlen(devmap->uid.vendor) == 0) { + spin_unlock(&dasd_devmap_lock); + return sprintf(buf, "\n"); + } + uid = &devmap->uid; + switch (uid->type) { + case UA_BASE_DEVICE: + sprintf(ua_string, "%02x", uid->real_unit_addr); + break; + case UA_BASE_PAV_ALIAS: + sprintf(ua_string, "%02x", uid->base_unit_addr); + break; + case UA_HYPER_PAV_ALIAS: + sprintf(ua_string, "xx"); + break; + default: + /* should not happen, treat like base device */ + sprintf(ua_string, "%02x", uid->real_unit_addr); + break; + } + snprintf(uid_string, sizeof(uid_string), "%s.%s.%04x.%s", + uid->vendor, uid->serial, uid->ssid, ua_string); spin_unlock(&dasd_devmap_lock); - - return snprintf(buf, PAGE_SIZE, "%s\n", uid); + return snprintf(buf, PAGE_SIZE, "%s\n", uid_string); } static DEVICE_ATTR(uid, 0444, dasd_uid_show, NULL); @@ -1040,39 +1046,16 @@ int dasd_set_uid(struct ccw_device *cdev, struct dasd_uid *uid) { struct dasd_devmap *devmap; - struct dasd_server_ssid_map *srv, *tmp; devmap = dasd_find_busid(cdev->dev.bus_id); if (IS_ERR(devmap)) return PTR_ERR(devmap); - /* generate entry for server_ssid_map */ - srv = (struct dasd_server_ssid_map *) - kzalloc(sizeof(struct dasd_server_ssid_map), GFP_KERNEL); - if (!srv) - return -ENOMEM; - strncpy(srv->sid.vendor, uid->vendor, sizeof(srv->sid.vendor) - 1); - strncpy(srv->sid.serial, uid->serial, sizeof(srv->sid.serial) - 1); - srv->sid.ssid = uid->ssid; - - /* server is already contained ? */ spin_lock(&dasd_devmap_lock); devmap->uid = *uid; - list_for_each_entry(tmp, &dasd_server_ssid_list, list) { - if (!memcmp(&srv->sid, &tmp->sid, - sizeof(struct system_id))) { - kfree(srv); - srv = NULL; - break; - } - } - - /* add servermap to serverlist */ - if (srv) - list_add(&srv->list, &dasd_server_ssid_list); spin_unlock(&dasd_devmap_lock); - return (srv ? 1 : 0); + return 0; } EXPORT_SYMBOL_GPL(dasd_set_uid); @@ -1138,9 +1121,6 @@ dasd_devmap_init(void) dasd_max_devindex = 0; for (i = 0; i < 256; i++) INIT_LIST_HEAD(&dasd_hashlists[i]); - - /* Initialize servermap structure. */ - INIT_LIST_HEAD(&dasd_server_ssid_list); return 0; } diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c index 571320ab9e1a..d91df38ee4f7 100644 --- a/drivers/s390/block/dasd_diag.c +++ b/drivers/s390/block/dasd_diag.c @@ -142,7 +142,7 @@ dasd_diag_erp(struct dasd_device *device) int rc; mdsk_term_io(device); - rc = mdsk_init_io(device, device->bp_block, 0, NULL); + rc = mdsk_init_io(device, device->block->bp_block, 0, NULL); if (rc) DEV_MESSAGE(KERN_WARNING, device, "DIAG ERP unsuccessful, " "rc=%d", rc); @@ -158,11 +158,11 @@ dasd_start_diag(struct dasd_ccw_req * cqr) struct dasd_diag_req *dreq; int rc; - device = cqr->device; + device = cqr->startdev; if (cqr->retries < 0) { DEV_MESSAGE(KERN_WARNING, device, "DIAG start_IO: request %p " "- no retry left)", cqr); - cqr->status = DASD_CQR_FAILED; + cqr->status = DASD_CQR_ERROR; return -EIO; } private = (struct dasd_diag_private *) device->private; @@ -184,7 +184,7 @@ dasd_start_diag(struct dasd_ccw_req * cqr) switch (rc) { case 0: /* Synchronous I/O finished successfully */ cqr->stopclk = get_clock(); - cqr->status = DASD_CQR_DONE; + cqr->status = DASD_CQR_SUCCESS; /* Indicate to calling function that only a dasd_schedule_bh() and no timer is needed */ rc = -EACCES; @@ -209,12 +209,12 @@ dasd_diag_term_IO(struct dasd_ccw_req * cqr) { struct dasd_device *device; - device = cqr->device; + device = cqr->startdev; mdsk_term_io(device); - mdsk_init_io(device, device->bp_block, 0, NULL); - cqr->status = DASD_CQR_CLEAR; + mdsk_init_io(device, device->block->bp_block, 0, NULL); + cqr->status = DASD_CQR_CLEAR_PENDING; cqr->stopclk = get_clock(); - dasd_schedule_bh(device); + dasd_schedule_device_bh(device); return 0; } @@ -247,7 +247,7 @@ dasd_ext_handler(__u16 code) return; } cqr = (struct dasd_ccw_req *) ip; - device = (struct dasd_device *) cqr->device; + device = (struct dasd_device *) cqr->startdev; if (strncmp(device->discipline->ebcname, (char *) &cqr->magic, 4)) { DEV_MESSAGE(KERN_WARNING, device, " magic number of dasd_ccw_req 0x%08X doesn't" @@ -260,10 +260,10 @@ dasd_ext_handler(__u16 code) spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); /* Check for a pending clear operation */ - if (cqr->status == DASD_CQR_CLEAR) { - cqr->status = DASD_CQR_QUEUED; - dasd_clear_timer(device); - dasd_schedule_bh(device); + if (cqr->status == DASD_CQR_CLEAR_PENDING) { + cqr->status = DASD_CQR_CLEARED; + dasd_device_clear_timer(device); + dasd_schedule_device_bh(device); spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); return; } @@ -272,11 +272,11 @@ dasd_ext_handler(__u16 code) expires = 0; if (status == 0) { - cqr->status = DASD_CQR_DONE; + cqr->status = DASD_CQR_SUCCESS; /* Start first request on queue if possible -> fast_io. */ if (!list_empty(&device->ccw_queue)) { next = list_entry(device->ccw_queue.next, - struct dasd_ccw_req, list); + struct dasd_ccw_req, devlist); if (next->status == DASD_CQR_QUEUED) { rc = dasd_start_diag(next); if (rc == 0) @@ -296,10 +296,10 @@ dasd_ext_handler(__u16 code) } if (expires != 0) - dasd_set_timer(device, expires); + dasd_device_set_timer(device, expires); else - dasd_clear_timer(device); - dasd_schedule_bh(device); + dasd_device_clear_timer(device); + dasd_schedule_device_bh(device); spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); } @@ -309,6 +309,7 @@ dasd_ext_handler(__u16 code) static int dasd_diag_check_device(struct dasd_device *device) { + struct dasd_block *block; struct dasd_diag_private *private; struct dasd_diag_characteristics *rdc_data; struct dasd_diag_bio bio; @@ -328,6 +329,16 @@ dasd_diag_check_device(struct dasd_device *device) ccw_device_get_id(device->cdev, &private->dev_id); device->private = (void *) private; } + block = dasd_alloc_block(); + if (IS_ERR(block)) { + DEV_MESSAGE(KERN_WARNING, device, "%s", + "could not allocate dasd block structure"); + kfree(device->private); + return PTR_ERR(block); + } + device->block = block; + block->base = device; + /* Read Device Characteristics */ rdc_data = (void *) &(private->rdc_data); rdc_data->dev_nr = private->dev_id.devno; @@ -409,14 +420,14 @@ dasd_diag_check_device(struct dasd_device *device) sizeof(DASD_DIAG_CMS1)) == 0) { /* get formatted blocksize from label block */ bsize = (unsigned int) label->block_size; - device->blocks = (unsigned long) label->block_count; + block->blocks = (unsigned long) label->block_count; } else - device->blocks = end_block; - device->bp_block = bsize; - device->s2b_shift = 0; /* bits to shift 512 to get a block */ + block->blocks = end_block; + block->bp_block = bsize; + block->s2b_shift = 0; /* bits to shift 512 to get a block */ for (sb = 512; sb < bsize; sb = sb << 1) - device->s2b_shift++; - rc = mdsk_init_io(device, device->bp_block, 0, NULL); + block->s2b_shift++; + rc = mdsk_init_io(device, block->bp_block, 0, NULL); if (rc) { DEV_MESSAGE(KERN_WARNING, device, "DIAG initialization " "failed (rc=%d)", rc); @@ -424,9 +435,9 @@ dasd_diag_check_device(struct dasd_device *device) } else { DEV_MESSAGE(KERN_INFO, device, "(%ld B/blk): %ldkB", - (unsigned long) device->bp_block, - (unsigned long) (device->blocks << - device->s2b_shift) >> 1); + (unsigned long) block->bp_block, + (unsigned long) (block->blocks << + block->s2b_shift) >> 1); } out: free_page((long) label); @@ -436,22 +447,16 @@ out: /* Fill in virtual disk geometry for device. Return zero on success, non-zero * otherwise. */ static int -dasd_diag_fill_geometry(struct dasd_device *device, struct hd_geometry *geo) +dasd_diag_fill_geometry(struct dasd_block *block, struct hd_geometry *geo) { - if (dasd_check_blocksize(device->bp_block) != 0) + if (dasd_check_blocksize(block->bp_block) != 0) return -EINVAL; - geo->cylinders = (device->blocks << device->s2b_shift) >> 10; + geo->cylinders = (block->blocks << block->s2b_shift) >> 10; geo->heads = 16; - geo->sectors = 128 >> device->s2b_shift; + geo->sectors = 128 >> block->s2b_shift; return 0; } -static dasd_era_t -dasd_diag_examine_error(struct dasd_ccw_req * cqr, struct irb * stat) -{ - return dasd_era_fatal; -} - static dasd_erp_fn_t dasd_diag_erp_action(struct dasd_ccw_req * cqr) { @@ -466,8 +471,9 @@ dasd_diag_erp_postaction(struct dasd_ccw_req * cqr) /* Create DASD request from block device request. Return pointer to new * request on success, ERR_PTR otherwise. */ -static struct dasd_ccw_req * -dasd_diag_build_cp(struct dasd_device * device, struct request *req) +static struct dasd_ccw_req *dasd_diag_build_cp(struct dasd_device *memdev, + struct dasd_block *block, + struct request *req) { struct dasd_ccw_req *cqr; struct dasd_diag_req *dreq; @@ -486,17 +492,17 @@ dasd_diag_build_cp(struct dasd_device * device, struct request *req) rw_cmd = MDSK_WRITE_REQ; else return ERR_PTR(-EINVAL); - blksize = device->bp_block; + blksize = block->bp_block; /* Calculate record id of first and last block. */ - first_rec = req->sector >> device->s2b_shift; - last_rec = (req->sector + req->nr_sectors - 1) >> device->s2b_shift; + first_rec = req->sector >> block->s2b_shift; + last_rec = (req->sector + req->nr_sectors - 1) >> block->s2b_shift; /* Check struct bio and count the number of blocks for the request. */ count = 0; rq_for_each_segment(bv, req, iter) { if (bv->bv_len & (blksize - 1)) /* Fba can only do full blocks. */ return ERR_PTR(-EINVAL); - count += bv->bv_len >> (device->s2b_shift + 9); + count += bv->bv_len >> (block->s2b_shift + 9); } /* Paranoia. */ if (count != last_rec - first_rec + 1) @@ -505,7 +511,7 @@ dasd_diag_build_cp(struct dasd_device * device, struct request *req) datasize = sizeof(struct dasd_diag_req) + count*sizeof(struct dasd_diag_bio); cqr = dasd_smalloc_request(dasd_diag_discipline.name, 0, - datasize, device); + datasize, memdev); if (IS_ERR(cqr)) return cqr; @@ -529,7 +535,9 @@ dasd_diag_build_cp(struct dasd_device * device, struct request *req) cqr->buildclk = get_clock(); if (req->cmd_flags & REQ_FAILFAST) set_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags); - cqr->device = device; + cqr->startdev = memdev; + cqr->memdev = memdev; + cqr->block = block; cqr->expires = DIAG_TIMEOUT; cqr->status = DASD_CQR_FILLED; return cqr; @@ -543,10 +551,15 @@ dasd_diag_free_cp(struct dasd_ccw_req *cqr, struct request *req) int status; status = cqr->status == DASD_CQR_DONE; - dasd_sfree_request(cqr, cqr->device); + dasd_sfree_request(cqr, cqr->memdev); return status; } +static void dasd_diag_handle_terminated_request(struct dasd_ccw_req *cqr) +{ + cqr->status = DASD_CQR_FILLED; +}; + /* Fill in IOCTL data for device. */ static int dasd_diag_fill_info(struct dasd_device * device, @@ -583,7 +596,7 @@ static struct dasd_discipline dasd_diag_discipline = { .fill_geometry = dasd_diag_fill_geometry, .start_IO = dasd_start_diag, .term_IO = dasd_diag_term_IO, - .examine_error = dasd_diag_examine_error, + .handle_terminated_request = dasd_diag_handle_terminated_request, .erp_action = dasd_diag_erp_action, .erp_postaction = dasd_diag_erp_postaction, .build_cp = dasd_diag_build_cp, diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index 6038d9195e27..61f16937c1e0 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -52,16 +52,6 @@ MODULE_LICENSE("GPL"); static struct dasd_discipline dasd_eckd_discipline; -struct dasd_eckd_private { - struct dasd_eckd_characteristics rdc_data; - struct dasd_eckd_confdata conf_data; - struct dasd_eckd_path path_data; - struct eckd_count count_area[5]; - int init_cqr_status; - int uses_cdl; - struct attrib_data_t attrib; /* e.g. cache operations */ -}; - /* The ccw bus type uses this table to find devices that it sends to * dasd_eckd_probe */ static struct ccw_device_id dasd_eckd_ids[] = { @@ -188,7 +178,7 @@ check_XRC (struct ccw1 *de_ccw, if (rc == -ENOSYS || rc == -EACCES) rc = 0; - de_ccw->count = sizeof (struct DE_eckd_data); + de_ccw->count = sizeof(struct DE_eckd_data); de_ccw->flags |= CCW_FLAG_SLI; return rc; } @@ -208,7 +198,7 @@ define_extent(struct ccw1 * ccw, struct DE_eckd_data * data, int trk, ccw->count = 16; ccw->cda = (__u32) __pa(data); - memset(data, 0, sizeof (struct DE_eckd_data)); + memset(data, 0, sizeof(struct DE_eckd_data)); switch (cmd) { case DASD_ECKD_CCW_READ_HOME_ADDRESS: case DASD_ECKD_CCW_READ_RECORD_ZERO: @@ -280,6 +270,132 @@ define_extent(struct ccw1 * ccw, struct DE_eckd_data * data, int trk, return rc; } +static int check_XRC_on_prefix(struct PFX_eckd_data *pfxdata, + struct dasd_device *device) +{ + struct dasd_eckd_private *private; + int rc; + + private = (struct dasd_eckd_private *) device->private; + if (!private->rdc_data.facilities.XRC_supported) + return 0; + + /* switch on System Time Stamp - needed for XRC Support */ + pfxdata->define_extend.ga_extended |= 0x08; /* 'Time Stamp Valid' */ + pfxdata->define_extend.ga_extended |= 0x02; /* 'Extended Parameter' */ + pfxdata->validity.time_stamp = 1; /* 'Time Stamp Valid' */ + + rc = get_sync_clock(&pfxdata->define_extend.ep_sys_time); + /* Ignore return code if sync clock is switched off. */ + if (rc == -ENOSYS || rc == -EACCES) + rc = 0; + return rc; +} + +static int prefix(struct ccw1 *ccw, struct PFX_eckd_data *pfxdata, int trk, + int totrk, int cmd, struct dasd_device *basedev, + struct dasd_device *startdev) +{ + struct dasd_eckd_private *basepriv, *startpriv; + struct DE_eckd_data *data; + struct ch_t geo, beg, end; + int rc = 0; + + basepriv = (struct dasd_eckd_private *) basedev->private; + startpriv = (struct dasd_eckd_private *) startdev->private; + data = &pfxdata->define_extend; + + ccw->cmd_code = DASD_ECKD_CCW_PFX; + ccw->flags = 0; + ccw->count = sizeof(*pfxdata); + ccw->cda = (__u32) __pa(pfxdata); + + memset(pfxdata, 0, sizeof(*pfxdata)); + /* prefix data */ + pfxdata->format = 0; + pfxdata->base_address = basepriv->conf_data.ned1.unit_addr; + pfxdata->base_lss = basepriv->conf_data.ned1.ID; + pfxdata->validity.define_extend = 1; + + /* private uid is kept up to date, conf_data may be outdated */ + if (startpriv->uid.type != UA_BASE_DEVICE) { + pfxdata->validity.verify_base = 1; + if (startpriv->uid.type == UA_HYPER_PAV_ALIAS) + pfxdata->validity.hyper_pav = 1; + } + + /* define extend data (mostly)*/ + switch (cmd) { + case DASD_ECKD_CCW_READ_HOME_ADDRESS: + case DASD_ECKD_CCW_READ_RECORD_ZERO: + case DASD_ECKD_CCW_READ: + case DASD_ECKD_CCW_READ_MT: + case DASD_ECKD_CCW_READ_CKD: + case DASD_ECKD_CCW_READ_CKD_MT: + case DASD_ECKD_CCW_READ_KD: + case DASD_ECKD_CCW_READ_KD_MT: + case DASD_ECKD_CCW_READ_COUNT: + data->mask.perm = 0x1; + data->attributes.operation = basepriv->attrib.operation; + break; + case DASD_ECKD_CCW_WRITE: + case DASD_ECKD_CCW_WRITE_MT: + case DASD_ECKD_CCW_WRITE_KD: + case DASD_ECKD_CCW_WRITE_KD_MT: + data->mask.perm = 0x02; + data->attributes.operation = basepriv->attrib.operation; + rc = check_XRC_on_prefix(pfxdata, basedev); + break; + case DASD_ECKD_CCW_WRITE_CKD: + case DASD_ECKD_CCW_WRITE_CKD_MT: + data->attributes.operation = DASD_BYPASS_CACHE; + rc = check_XRC_on_prefix(pfxdata, basedev); + break; + case DASD_ECKD_CCW_ERASE: + case DASD_ECKD_CCW_WRITE_HOME_ADDRESS: + case DASD_ECKD_CCW_WRITE_RECORD_ZERO: + data->mask.perm = 0x3; + data->mask.auth = 0x1; + data->attributes.operation = DASD_BYPASS_CACHE; + rc = check_XRC_on_prefix(pfxdata, basedev); + break; + default: + DEV_MESSAGE(KERN_ERR, basedev, "unknown opcode 0x%x", cmd); + break; + } + + data->attributes.mode = 0x3; /* ECKD */ + + if ((basepriv->rdc_data.cu_type == 0x2105 || + basepriv->rdc_data.cu_type == 0x2107 || + basepriv->rdc_data.cu_type == 0x1750) + && !(basepriv->uses_cdl && trk < 2)) + data->ga_extended |= 0x40; /* Regular Data Format Mode */ + + geo.cyl = basepriv->rdc_data.no_cyl; + geo.head = basepriv->rdc_data.trk_per_cyl; + beg.cyl = trk / geo.head; + beg.head = trk % geo.head; + end.cyl = totrk / geo.head; + end.head = totrk % geo.head; + + /* check for sequential prestage - enhance cylinder range */ + if (data->attributes.operation == DASD_SEQ_PRESTAGE || + data->attributes.operation == DASD_SEQ_ACCESS) { + + if (end.cyl + basepriv->attrib.nr_cyl < geo.cyl) + end.cyl += basepriv->attrib.nr_cyl; + else + end.cyl = (geo.cyl - 1); + } + + data->beg_ext.cyl = beg.cyl; + data->beg_ext.head = beg.head; + data->end_ext.cyl = end.cyl; + data->end_ext.head = end.head; + return rc; +} + static void locate_record(struct ccw1 *ccw, struct LO_eckd_data *data, int trk, int rec_on_trk, int no_rec, int cmd, @@ -300,7 +416,7 @@ locate_record(struct ccw1 *ccw, struct LO_eckd_data *data, int trk, ccw->count = 16; ccw->cda = (__u32) __pa(data); - memset(data, 0, sizeof (struct LO_eckd_data)); + memset(data, 0, sizeof(struct LO_eckd_data)); sector = 0; if (rec_on_trk) { switch (private->rdc_data.dev_type) { @@ -441,12 +557,15 @@ dasd_eckd_generate_uid(struct dasd_device *device, struct dasd_uid *uid) sizeof(uid->serial) - 1); EBCASC(uid->serial, sizeof(uid->serial) - 1); uid->ssid = confdata->neq.subsystemID; - if (confdata->ned2.sneq.flags == 0x40) { - uid->alias = 1; - uid->unit_addr = confdata->ned2.sneq.base_unit_addr; - } else - uid->unit_addr = confdata->ned1.unit_addr; - + uid->real_unit_addr = confdata->ned1.unit_addr; + if (confdata->ned2.sneq.flags == 0x40 && + confdata->ned2.sneq.format == 0x0001) { + uid->type = confdata->ned2.sneq.sua_flags; + if (uid->type == UA_BASE_PAV_ALIAS) + uid->base_unit_addr = confdata->ned2.sneq.base_unit_addr; + } else { + uid->type = UA_BASE_DEVICE; + } return 0; } @@ -470,7 +589,9 @@ static struct dasd_ccw_req *dasd_eckd_build_rcd_lpm(struct dasd_device *device, ccw->cda = (__u32)(addr_t)rcd_buffer; ccw->count = ciw->count; - cqr->device = device; + cqr->startdev = device; + cqr->memdev = device; + cqr->block = NULL; cqr->expires = 10*HZ; cqr->lpm = lpm; clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags); @@ -511,7 +632,7 @@ static int dasd_eckd_read_conf_lpm(struct dasd_device *device, /* * on success we update the user input parms */ - dasd_sfree_request(cqr, cqr->device); + dasd_sfree_request(cqr, cqr->memdev); if (ret) goto out_error; @@ -557,19 +678,19 @@ dasd_eckd_read_conf(struct dasd_device *device) "data retrieved"); continue; /* no error */ } - if (conf_len != sizeof (struct dasd_eckd_confdata)) { + if (conf_len != sizeof(struct dasd_eckd_confdata)) { MESSAGE(KERN_WARNING, "sizes of configuration data mismatch" "%d (read) vs %ld (expected)", conf_len, - sizeof (struct dasd_eckd_confdata)); + sizeof(struct dasd_eckd_confdata)); kfree(conf_data); continue; /* no error */ } /* save first valid configuration data */ if (!conf_data_saved){ memcpy(&private->conf_data, conf_data, - sizeof (struct dasd_eckd_confdata)); + sizeof(struct dasd_eckd_confdata)); conf_data_saved++; } switch (((char *)conf_data)[242] & 0x07){ @@ -586,39 +707,104 @@ dasd_eckd_read_conf(struct dasd_device *device) return 0; } +static int dasd_eckd_read_features(struct dasd_device *device) +{ + struct dasd_psf_prssd_data *prssdp; + struct dasd_rssd_features *features; + struct dasd_ccw_req *cqr; + struct ccw1 *ccw; + int rc; + struct dasd_eckd_private *private; + + private = (struct dasd_eckd_private *) device->private; + cqr = dasd_smalloc_request(dasd_eckd_discipline.name, + 1 /* PSF */ + 1 /* RSSD */ , + (sizeof(struct dasd_psf_prssd_data) + + sizeof(struct dasd_rssd_features)), + device); + if (IS_ERR(cqr)) { + DEV_MESSAGE(KERN_WARNING, device, "%s", + "Could not allocate initialization request"); + return PTR_ERR(cqr); + } + cqr->startdev = device; + cqr->memdev = device; + cqr->block = NULL; + clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags); + cqr->retries = 5; + cqr->expires = 10 * HZ; + + /* Prepare for Read Subsystem Data */ + prssdp = (struct dasd_psf_prssd_data *) cqr->data; + memset(prssdp, 0, sizeof(struct dasd_psf_prssd_data)); + prssdp->order = PSF_ORDER_PRSSD; + prssdp->suborder = 0x41; /* Read Feature Codes */ + /* all other bytes of prssdp must be zero */ + + ccw = cqr->cpaddr; + ccw->cmd_code = DASD_ECKD_CCW_PSF; + ccw->count = sizeof(struct dasd_psf_prssd_data); + ccw->flags |= CCW_FLAG_CC; + ccw->cda = (__u32)(addr_t) prssdp; + + /* Read Subsystem Data - feature codes */ + features = (struct dasd_rssd_features *) (prssdp + 1); + memset(features, 0, sizeof(struct dasd_rssd_features)); + + ccw++; + ccw->cmd_code = DASD_ECKD_CCW_RSSD; + ccw->count = sizeof(struct dasd_rssd_features); + ccw->cda = (__u32)(addr_t) features; + + cqr->buildclk = get_clock(); + cqr->status = DASD_CQR_FILLED; + rc = dasd_sleep_on(cqr); + if (rc == 0) { + prssdp = (struct dasd_psf_prssd_data *) cqr->data; + features = (struct dasd_rssd_features *) (prssdp + 1); + memcpy(&private->features, features, + sizeof(struct dasd_rssd_features)); + } + dasd_sfree_request(cqr, cqr->memdev); + return rc; +} + + /* * Build CP for Perform Subsystem Function - SSC. */ -static struct dasd_ccw_req * -dasd_eckd_build_psf_ssc(struct dasd_device *device) +static struct dasd_ccw_req *dasd_eckd_build_psf_ssc(struct dasd_device *device) { - struct dasd_ccw_req *cqr; - struct dasd_psf_ssc_data *psf_ssc_data; - struct ccw1 *ccw; + struct dasd_ccw_req *cqr; + struct dasd_psf_ssc_data *psf_ssc_data; + struct ccw1 *ccw; - cqr = dasd_smalloc_request("ECKD", 1 /* PSF */ , + cqr = dasd_smalloc_request("ECKD", 1 /* PSF */ , sizeof(struct dasd_psf_ssc_data), device); - if (IS_ERR(cqr)) { - DEV_MESSAGE(KERN_WARNING, device, "%s", + if (IS_ERR(cqr)) { + DEV_MESSAGE(KERN_WARNING, device, "%s", "Could not allocate PSF-SSC request"); - return cqr; - } - psf_ssc_data = (struct dasd_psf_ssc_data *)cqr->data; - psf_ssc_data->order = PSF_ORDER_SSC; - psf_ssc_data->suborder = 0x08; - - ccw = cqr->cpaddr; - ccw->cmd_code = DASD_ECKD_CCW_PSF; - ccw->cda = (__u32)(addr_t)psf_ssc_data; - ccw->count = 66; - - cqr->device = device; - cqr->expires = 10*HZ; - cqr->buildclk = get_clock(); - cqr->status = DASD_CQR_FILLED; - return cqr; + return cqr; + } + psf_ssc_data = (struct dasd_psf_ssc_data *)cqr->data; + psf_ssc_data->order = PSF_ORDER_SSC; + psf_ssc_data->suborder = 0x88; + psf_ssc_data->reserved[0] = 0x88; + + ccw = cqr->cpaddr; + ccw->cmd_code = DASD_ECKD_CCW_PSF; + ccw->cda = (__u32)(addr_t)psf_ssc_data; + ccw->count = 66; + + cqr->startdev = device; + cqr->memdev = device; + cqr->block = NULL; + cqr->expires = 10*HZ; + cqr->buildclk = get_clock(); + cqr->status = DASD_CQR_FILLED; + return cqr; } /* @@ -629,28 +815,28 @@ dasd_eckd_build_psf_ssc(struct dasd_device *device) static int dasd_eckd_psf_ssc(struct dasd_device *device) { - struct dasd_ccw_req *cqr; - int rc; - - cqr = dasd_eckd_build_psf_ssc(device); - if (IS_ERR(cqr)) - return PTR_ERR(cqr); - - rc = dasd_sleep_on(cqr); - if (!rc) - /* trigger CIO to reprobe devices */ - css_schedule_reprobe(); - dasd_sfree_request(cqr, cqr->device); - return rc; + struct dasd_ccw_req *cqr; + int rc; + + cqr = dasd_eckd_build_psf_ssc(device); + if (IS_ERR(cqr)) + return PTR_ERR(cqr); + + rc = dasd_sleep_on(cqr); + if (!rc) + /* trigger CIO to reprobe devices */ + css_schedule_reprobe(); + dasd_sfree_request(cqr, cqr->memdev); + return rc; } /* * Valide storage server of current device. */ -static int -dasd_eckd_validate_server(struct dasd_device *device, struct dasd_uid *uid) +static int dasd_eckd_validate_server(struct dasd_device *device) { int rc; + struct dasd_eckd_private *private; /* Currently PAV is the only reason to 'validate' server on LPAR */ if (dasd_nopav || MACHINE_IS_VM) @@ -659,9 +845,11 @@ dasd_eckd_validate_server(struct dasd_device *device, struct dasd_uid *uid) rc = dasd_eckd_psf_ssc(device); /* may be requested feature is not available on server, * therefore just report error and go ahead */ + private = (struct dasd_eckd_private *) device->private; DEV_MESSAGE(KERN_INFO, device, "PSF-SSC on storage subsystem %s.%s.%04x returned rc=%d", - uid->vendor, uid->serial, uid->ssid, rc); + private->uid.vendor, private->uid.serial, + private->uid.ssid, rc); /* RE-Read Configuration Data */ return dasd_eckd_read_conf(device); } @@ -674,9 +862,9 @@ static int dasd_eckd_check_characteristics(struct dasd_device *device) { struct dasd_eckd_private *private; - struct dasd_uid uid; + struct dasd_block *block; void *rdc_data; - int rc; + int is_known, rc; private = (struct dasd_eckd_private *) device->private; if (private == NULL) { @@ -699,27 +887,54 @@ dasd_eckd_check_characteristics(struct dasd_device *device) /* Read Configuration Data */ rc = dasd_eckd_read_conf(device); if (rc) - return rc; + goto out_err1; /* Generate device unique id and register in devmap */ - rc = dasd_eckd_generate_uid(device, &uid); + rc = dasd_eckd_generate_uid(device, &private->uid); if (rc) - return rc; - rc = dasd_set_uid(device->cdev, &uid); - if (rc == 1) /* new server found */ - rc = dasd_eckd_validate_server(device, &uid); + goto out_err1; + dasd_set_uid(device->cdev, &private->uid); + + if (private->uid.type == UA_BASE_DEVICE) { + block = dasd_alloc_block(); + if (IS_ERR(block)) { + DEV_MESSAGE(KERN_WARNING, device, "%s", + "could not allocate dasd block structure"); + rc = PTR_ERR(block); + goto out_err1; + } + device->block = block; + block->base = device; + } + + /* register lcu with alias handling, enable PAV if this is a new lcu */ + is_known = dasd_alias_make_device_known_to_lcu(device); + if (is_known < 0) { + rc = is_known; + goto out_err2; + } + if (!is_known) { + /* new lcu found */ + rc = dasd_eckd_validate_server(device); /* will switch pav on */ + if (rc) + goto out_err3; + } + + /* Read Feature Codes */ + rc = dasd_eckd_read_features(device); if (rc) - return rc; + goto out_err3; /* Read Device Characteristics */ rdc_data = (void *) &(private->rdc_data); memset(rdc_data, 0, sizeof(rdc_data)); rc = dasd_generic_read_dev_chars(device, "ECKD", &rdc_data, 64); - if (rc) + if (rc) { DEV_MESSAGE(KERN_WARNING, device, "Read device characteristics returned " "rc=%d", rc); - + goto out_err3; + } DEV_MESSAGE(KERN_INFO, device, "%04X/%02X(CU:%04X/%02X) Cyl:%d Head:%d Sec:%d", private->rdc_data.dev_type, @@ -729,9 +944,24 @@ dasd_eckd_check_characteristics(struct dasd_device *device) private->rdc_data.no_cyl, private->rdc_data.trk_per_cyl, private->rdc_data.sec_per_trk); + return 0; + +out_err3: + dasd_alias_disconnect_device_from_lcu(device); +out_err2: + dasd_free_block(device->block); + device->block = NULL; +out_err1: + kfree(device->private); + device->private = NULL; return rc; } +static void dasd_eckd_uncheck_device(struct dasd_device *device) +{ + dasd_alias_disconnect_device_from_lcu(device); +} + static struct dasd_ccw_req * dasd_eckd_analysis_ccw(struct dasd_device *device) { @@ -755,7 +985,7 @@ dasd_eckd_analysis_ccw(struct dasd_device *device) /* Define extent for the first 3 tracks. */ define_extent(ccw++, cqr->data, 0, 2, DASD_ECKD_CCW_READ_COUNT, device); - LO_data = cqr->data + sizeof (struct DE_eckd_data); + LO_data = cqr->data + sizeof(struct DE_eckd_data); /* Locate record for the first 4 records on track 0. */ ccw[-1].flags |= CCW_FLAG_CC; locate_record(ccw++, LO_data++, 0, 0, 4, @@ -783,7 +1013,9 @@ dasd_eckd_analysis_ccw(struct dasd_device *device) ccw->count = 8; ccw->cda = (__u32)(addr_t) count_data; - cqr->device = device; + cqr->block = NULL; + cqr->startdev = device; + cqr->memdev = device; cqr->retries = 0; cqr->buildclk = get_clock(); cqr->status = DASD_CQR_FILLED; @@ -803,7 +1035,7 @@ dasd_eckd_analysis_callback(struct dasd_ccw_req *init_cqr, void *data) struct dasd_eckd_private *private; struct dasd_device *device; - device = init_cqr->device; + device = init_cqr->startdev; private = (struct dasd_eckd_private *) device->private; private->init_cqr_status = init_cqr->status; dasd_sfree_request(init_cqr, device); @@ -811,13 +1043,13 @@ dasd_eckd_analysis_callback(struct dasd_ccw_req *init_cqr, void *data) } static int -dasd_eckd_start_analysis(struct dasd_device *device) +dasd_eckd_start_analysis(struct dasd_block *block) { struct dasd_eckd_private *private; struct dasd_ccw_req *init_cqr; - private = (struct dasd_eckd_private *) device->private; - init_cqr = dasd_eckd_analysis_ccw(device); + private = (struct dasd_eckd_private *) block->base->private; + init_cqr = dasd_eckd_analysis_ccw(block->base); if (IS_ERR(init_cqr)) return PTR_ERR(init_cqr); init_cqr->callback = dasd_eckd_analysis_callback; @@ -828,13 +1060,15 @@ dasd_eckd_start_analysis(struct dasd_device *device) } static int -dasd_eckd_end_analysis(struct dasd_device *device) +dasd_eckd_end_analysis(struct dasd_block *block) { + struct dasd_device *device; struct dasd_eckd_private *private; struct eckd_count *count_area; unsigned int sb, blk_per_trk; int status, i; + device = block->base; private = (struct dasd_eckd_private *) device->private; status = private->init_cqr_status; private->init_cqr_status = -1; @@ -846,7 +1080,7 @@ dasd_eckd_end_analysis(struct dasd_device *device) private->uses_cdl = 1; /* Calculate number of blocks/records per track. */ - blk_per_trk = recs_per_track(&private->rdc_data, 0, device->bp_block); + blk_per_trk = recs_per_track(&private->rdc_data, 0, block->bp_block); /* Check Track 0 for Compatible Disk Layout */ count_area = NULL; for (i = 0; i < 3; i++) { @@ -876,56 +1110,65 @@ dasd_eckd_end_analysis(struct dasd_device *device) if (count_area != NULL && count_area->kl == 0) { /* we found notthing violating our disk layout */ if (dasd_check_blocksize(count_area->dl) == 0) - device->bp_block = count_area->dl; + block->bp_block = count_area->dl; } - if (device->bp_block == 0) { + if (block->bp_block == 0) { DEV_MESSAGE(KERN_WARNING, device, "%s", "Volume has incompatible disk layout"); return -EMEDIUMTYPE; } - device->s2b_shift = 0; /* bits to shift 512 to get a block */ - for (sb = 512; sb < device->bp_block; sb = sb << 1) - device->s2b_shift++; + block->s2b_shift = 0; /* bits to shift 512 to get a block */ + for (sb = 512; sb < block->bp_block; sb = sb << 1) + block->s2b_shift++; - blk_per_trk = recs_per_track(&private->rdc_data, 0, device->bp_block); - device->blocks = (private->rdc_data.no_cyl * + blk_per_trk = recs_per_track(&private->rdc_data, 0, block->bp_block); + block->blocks = (private->rdc_data.no_cyl * private->rdc_data.trk_per_cyl * blk_per_trk); DEV_MESSAGE(KERN_INFO, device, "(%dkB blks): %dkB at %dkB/trk %s", - (device->bp_block >> 10), + (block->bp_block >> 10), ((private->rdc_data.no_cyl * private->rdc_data.trk_per_cyl * - blk_per_trk * (device->bp_block >> 9)) >> 1), - ((blk_per_trk * device->bp_block) >> 10), + blk_per_trk * (block->bp_block >> 9)) >> 1), + ((blk_per_trk * block->bp_block) >> 10), private->uses_cdl ? "compatible disk layout" : "linux disk layout"); return 0; } -static int -dasd_eckd_do_analysis(struct dasd_device *device) +static int dasd_eckd_do_analysis(struct dasd_block *block) { struct dasd_eckd_private *private; - private = (struct dasd_eckd_private *) device->private; + private = (struct dasd_eckd_private *) block->base->private; if (private->init_cqr_status < 0) - return dasd_eckd_start_analysis(device); + return dasd_eckd_start_analysis(block); else - return dasd_eckd_end_analysis(device); + return dasd_eckd_end_analysis(block); } +static int dasd_eckd_ready_to_online(struct dasd_device *device) +{ + return dasd_alias_add_device(device); +}; + +static int dasd_eckd_online_to_ready(struct dasd_device *device) +{ + return dasd_alias_remove_device(device); +}; + static int -dasd_eckd_fill_geometry(struct dasd_device *device, struct hd_geometry *geo) +dasd_eckd_fill_geometry(struct dasd_block *block, struct hd_geometry *geo) { struct dasd_eckd_private *private; - private = (struct dasd_eckd_private *) device->private; - if (dasd_check_blocksize(device->bp_block) == 0) { + private = (struct dasd_eckd_private *) block->base->private; + if (dasd_check_blocksize(block->bp_block) == 0) { geo->sectors = recs_per_track(&private->rdc_data, - 0, device->bp_block); + 0, block->bp_block); } geo->cylinders = private->rdc_data.no_cyl; geo->heads = private->rdc_data.trk_per_cyl; @@ -1037,7 +1280,7 @@ dasd_eckd_format_device(struct dasd_device * device, locate_record(ccw++, (struct LO_eckd_data *) data, fdata->start_unit, 0, rpt + 1, DASD_ECKD_CCW_WRITE_RECORD_ZERO, device, - device->bp_block); + device->block->bp_block); data += sizeof(struct LO_eckd_data); break; case 0x04: /* Invalidate track. */ @@ -1110,43 +1353,28 @@ dasd_eckd_format_device(struct dasd_device * device, ccw++; } } - fcp->device = device; - fcp->retries = 2; /* set retry counter to enable ERP */ + fcp->startdev = device; + fcp->memdev = device; + clear_bit(DASD_CQR_FLAGS_USE_ERP, &fcp->flags); + fcp->retries = 5; /* set retry counter to enable default ERP */ fcp->buildclk = get_clock(); fcp->status = DASD_CQR_FILLED; return fcp; } -static dasd_era_t -dasd_eckd_examine_error(struct dasd_ccw_req * cqr, struct irb * irb) +static void dasd_eckd_handle_terminated_request(struct dasd_ccw_req *cqr) { - struct dasd_device *device = (struct dasd_device *) cqr->device; - struct ccw_device *cdev = device->cdev; - - if (irb->scsw.cstat == 0x00 && - irb->scsw.dstat == (DEV_STAT_CHN_END | DEV_STAT_DEV_END)) - return dasd_era_none; - - switch (cdev->id.cu_type) { - case 0x3990: - case 0x2105: - case 0x2107: - case 0x1750: - return dasd_3990_erp_examine(cqr, irb); - case 0x9343: - return dasd_9343_erp_examine(cqr, irb); - case 0x3880: - default: - DEV_MESSAGE(KERN_WARNING, device, "%s", - "default (unknown CU type) - RECOVERABLE return"); - return dasd_era_recover; + cqr->status = DASD_CQR_FILLED; + if (cqr->block && (cqr->startdev != cqr->block->base)) { + dasd_eckd_reset_ccw_to_base_io(cqr); + cqr->startdev = cqr->block->base; } -} +}; static dasd_erp_fn_t dasd_eckd_erp_action(struct dasd_ccw_req * cqr) { - struct dasd_device *device = (struct dasd_device *) cqr->device; + struct dasd_device *device = (struct dasd_device *) cqr->startdev; struct ccw_device *cdev = device->cdev; switch (cdev->id.cu_type) { @@ -1168,8 +1396,37 @@ dasd_eckd_erp_postaction(struct dasd_ccw_req * cqr) return dasd_default_erp_postaction; } -static struct dasd_ccw_req * -dasd_eckd_build_cp(struct dasd_device * device, struct request *req) + +static void dasd_eckd_handle_unsolicited_interrupt(struct dasd_device *device, + struct irb *irb) +{ + char mask; + + /* first of all check for state change pending interrupt */ + mask = DEV_STAT_ATTENTION | DEV_STAT_DEV_END | DEV_STAT_UNIT_EXCEP; + if ((irb->scsw.dstat & mask) == mask) { + dasd_generic_handle_state_change(device); + return; + } + + /* summary unit check */ + if ((irb->scsw.dstat & DEV_STAT_UNIT_CHECK) && irb->ecw[7] == 0x0D) { + dasd_alias_handle_summary_unit_check(device, irb); + return; + } + + /* just report other unsolicited interrupts */ + DEV_MESSAGE(KERN_DEBUG, device, "%s", + "unsolicited interrupt received"); + device->discipline->dump_sense(device, NULL, irb); + dasd_schedule_device_bh(device); + + return; +}; + +static struct dasd_ccw_req *dasd_eckd_build_cp(struct dasd_device *startdev, + struct dasd_block *block, + struct request *req) { struct dasd_eckd_private *private; unsigned long *idaws; @@ -1185,8 +1442,11 @@ dasd_eckd_build_cp(struct dasd_device * device, struct request *req) sector_t first_trk, last_trk; unsigned int first_offs, last_offs; unsigned char cmd, rcmd; + int use_prefix; + struct dasd_device *basedev; - private = (struct dasd_eckd_private *) device->private; + basedev = block->base; + private = (struct dasd_eckd_private *) basedev->private; if (rq_data_dir(req) == READ) cmd = DASD_ECKD_CCW_READ_MT; else if (rq_data_dir(req) == WRITE) @@ -1194,13 +1454,13 @@ dasd_eckd_build_cp(struct dasd_device * device, struct request *req) else return ERR_PTR(-EINVAL); /* Calculate number of blocks/records per track. */ - blksize = device->bp_block; + blksize = block->bp_block; blk_per_trk = recs_per_track(&private->rdc_data, 0, blksize); /* Calculate record id of first and last block. */ - first_rec = first_trk = req->sector >> device->s2b_shift; + first_rec = first_trk = req->sector >> block->s2b_shift; first_offs = sector_div(first_trk, blk_per_trk); last_rec = last_trk = - (req->sector + req->nr_sectors - 1) >> device->s2b_shift; + (req->sector + req->nr_sectors - 1) >> block->s2b_shift; last_offs = sector_div(last_trk, blk_per_trk); /* Check struct bio and count the number of blocks for the request. */ count = 0; @@ -1209,20 +1469,33 @@ dasd_eckd_build_cp(struct dasd_device * device, struct request *req) if (bv->bv_len & (blksize - 1)) /* Eckd can only do full blocks. */ return ERR_PTR(-EINVAL); - count += bv->bv_len >> (device->s2b_shift + 9); + count += bv->bv_len >> (block->s2b_shift + 9); #if defined(CONFIG_64BIT) if (idal_is_needed (page_address(bv->bv_page), bv->bv_len)) - cidaw += bv->bv_len >> (device->s2b_shift + 9); + cidaw += bv->bv_len >> (block->s2b_shift + 9); #endif } /* Paranoia. */ if (count != last_rec - first_rec + 1) return ERR_PTR(-EINVAL); - /* 1x define extent + 1x locate record + number of blocks */ - cplength = 2 + count; - /* 1x define extent + 1x locate record + cidaws*sizeof(long) */ - datasize = sizeof(struct DE_eckd_data) + sizeof(struct LO_eckd_data) + - cidaw * sizeof(unsigned long); + + /* use the prefix command if available */ + use_prefix = private->features.feature[8] & 0x01; + if (use_prefix) { + /* 1x prefix + number of blocks */ + cplength = 2 + count; + /* 1x prefix + cidaws*sizeof(long) */ + datasize = sizeof(struct PFX_eckd_data) + + sizeof(struct LO_eckd_data) + + cidaw * sizeof(unsigned long); + } else { + /* 1x define extent + 1x locate record + number of blocks */ + cplength = 2 + count; + /* 1x define extent + 1x locate record + cidaws*sizeof(long) */ + datasize = sizeof(struct DE_eckd_data) + + sizeof(struct LO_eckd_data) + + cidaw * sizeof(unsigned long); + } /* Find out the number of additional locate record ccws for cdl. */ if (private->uses_cdl && first_rec < 2*blk_per_trk) { if (last_rec >= 2*blk_per_trk) @@ -1232,26 +1505,42 @@ dasd_eckd_build_cp(struct dasd_device * device, struct request *req) } /* Allocate the ccw request. */ cqr = dasd_smalloc_request(dasd_eckd_discipline.name, - cplength, datasize, device); + cplength, datasize, startdev); if (IS_ERR(cqr)) return cqr; ccw = cqr->cpaddr; - /* First ccw is define extent. */ - if (define_extent(ccw++, cqr->data, first_trk, - last_trk, cmd, device) == -EAGAIN) { - /* Clock not in sync and XRC is enabled. Try again later. */ - dasd_sfree_request(cqr, device); - return ERR_PTR(-EAGAIN); + /* First ccw is define extent or prefix. */ + if (use_prefix) { + if (prefix(ccw++, cqr->data, first_trk, + last_trk, cmd, basedev, startdev) == -EAGAIN) { + /* Clock not in sync and XRC is enabled. + * Try again later. + */ + dasd_sfree_request(cqr, startdev); + return ERR_PTR(-EAGAIN); + } + idaws = (unsigned long *) (cqr->data + + sizeof(struct PFX_eckd_data)); + } else { + if (define_extent(ccw++, cqr->data, first_trk, + last_trk, cmd, startdev) == -EAGAIN) { + /* Clock not in sync and XRC is enabled. + * Try again later. + */ + dasd_sfree_request(cqr, startdev); + return ERR_PTR(-EAGAIN); + } + idaws = (unsigned long *) (cqr->data + + sizeof(struct DE_eckd_data)); } /* Build locate_record+read/write/ccws. */ - idaws = (unsigned long *) (cqr->data + sizeof(struct DE_eckd_data)); LO_data = (struct LO_eckd_data *) (idaws + cidaw); recid = first_rec; if (private->uses_cdl == 0 || recid > 2*blk_per_trk) { /* Only standard blocks so there is just one locate record. */ ccw[-1].flags |= CCW_FLAG_CC; locate_record(ccw++, LO_data++, first_trk, first_offs + 1, - last_rec - recid + 1, cmd, device, blksize); + last_rec - recid + 1, cmd, basedev, blksize); } rq_for_each_segment(bv, req, iter) { dst = page_address(bv->bv_page) + bv->bv_offset; @@ -1281,7 +1570,7 @@ dasd_eckd_build_cp(struct dasd_device * device, struct request *req) ccw[-1].flags |= CCW_FLAG_CC; locate_record(ccw++, LO_data++, trkid, recoffs + 1, - 1, rcmd, device, count); + 1, rcmd, basedev, count); } /* Locate record for standard blocks ? */ if (private->uses_cdl && recid == 2*blk_per_trk) { @@ -1289,7 +1578,7 @@ dasd_eckd_build_cp(struct dasd_device * device, struct request *req) locate_record(ccw++, LO_data++, trkid, recoffs + 1, last_rec - recid + 1, - cmd, device, count); + cmd, basedev, count); } /* Read/write ccw. */ ccw[-1].flags |= CCW_FLAG_CC; @@ -1310,7 +1599,9 @@ dasd_eckd_build_cp(struct dasd_device * device, struct request *req) } if (req->cmd_flags & REQ_FAILFAST) set_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags); - cqr->device = device; + cqr->startdev = startdev; + cqr->memdev = startdev; + cqr->block = block; cqr->expires = 5 * 60 * HZ; /* 5 minutes */ cqr->lpm = private->path_data.ppm; cqr->retries = 256; @@ -1333,10 +1624,10 @@ dasd_eckd_free_cp(struct dasd_ccw_req *cqr, struct request *req) if (!dasd_page_cache) goto out; - private = (struct dasd_eckd_private *) cqr->device->private; - blksize = cqr->device->bp_block; + private = (struct dasd_eckd_private *) cqr->block->base->private; + blksize = cqr->block->bp_block; blk_per_trk = recs_per_track(&private->rdc_data, 0, blksize); - recid = req->sector >> cqr->device->s2b_shift; + recid = req->sector >> cqr->block->s2b_shift; ccw = cqr->cpaddr; /* Skip over define extent & locate record. */ ccw++; @@ -1367,10 +1658,71 @@ dasd_eckd_free_cp(struct dasd_ccw_req *cqr, struct request *req) } out: status = cqr->status == DASD_CQR_DONE; - dasd_sfree_request(cqr, cqr->device); + dasd_sfree_request(cqr, cqr->memdev); return status; } +/* + * Modify ccw chain in cqr so it can be started on a base device. + * + * Note that this is not enough to restart the cqr! + * Either reset cqr->startdev as well (summary unit check handling) + * or restart via separate cqr (as in ERP handling). + */ +void dasd_eckd_reset_ccw_to_base_io(struct dasd_ccw_req *cqr) +{ + struct ccw1 *ccw; + struct PFX_eckd_data *pfxdata; + + ccw = cqr->cpaddr; + pfxdata = cqr->data; + + if (ccw->cmd_code == DASD_ECKD_CCW_PFX) { + pfxdata->validity.verify_base = 0; + pfxdata->validity.hyper_pav = 0; + } +} + +#define DASD_ECKD_CHANQ_MAX_SIZE 4 + +static struct dasd_ccw_req *dasd_eckd_build_alias_cp(struct dasd_device *base, + struct dasd_block *block, + struct request *req) +{ + struct dasd_eckd_private *private; + struct dasd_device *startdev; + unsigned long flags; + struct dasd_ccw_req *cqr; + + startdev = dasd_alias_get_start_dev(base); + if (!startdev) + startdev = base; + private = (struct dasd_eckd_private *) startdev->private; + if (private->count >= DASD_ECKD_CHANQ_MAX_SIZE) + return ERR_PTR(-EBUSY); + + spin_lock_irqsave(get_ccwdev_lock(startdev->cdev), flags); + private->count++; + cqr = dasd_eckd_build_cp(startdev, block, req); + if (IS_ERR(cqr)) + private->count--; + spin_unlock_irqrestore(get_ccwdev_lock(startdev->cdev), flags); + return cqr; +} + +static int dasd_eckd_free_alias_cp(struct dasd_ccw_req *cqr, + struct request *req) +{ + struct dasd_eckd_private *private; + unsigned long flags; + + spin_lock_irqsave(get_ccwdev_lock(cqr->memdev->cdev), flags); + private = (struct dasd_eckd_private *) cqr->memdev->private; + private->count--; + spin_unlock_irqrestore(get_ccwdev_lock(cqr->memdev->cdev), flags); + return dasd_eckd_free_cp(cqr, req); +} + static int dasd_eckd_fill_info(struct dasd_device * device, struct dasd_information2_t * info) @@ -1384,9 +1736,9 @@ dasd_eckd_fill_info(struct dasd_device * device, info->characteristics_size = sizeof(struct dasd_eckd_characteristics); memcpy(info->characteristics, &private->rdc_data, sizeof(struct dasd_eckd_characteristics)); - info->confdata_size = sizeof (struct dasd_eckd_confdata); + info->confdata_size = sizeof(struct dasd_eckd_confdata); memcpy(info->configuration_data, &private->conf_data, - sizeof (struct dasd_eckd_confdata)); + sizeof(struct dasd_eckd_confdata)); return 0; } @@ -1419,7 +1771,8 @@ dasd_eckd_release(struct dasd_device *device) cqr->cpaddr->flags |= CCW_FLAG_SLI; cqr->cpaddr->count = 32; cqr->cpaddr->cda = (__u32)(addr_t) cqr->data; - cqr->device = device; + cqr->startdev = device; + cqr->memdev = device; clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags); set_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags); cqr->retries = 2; /* set retry counter to enable basic ERP */ @@ -1429,7 +1782,7 @@ dasd_eckd_release(struct dasd_device *device) rc = dasd_sleep_on_immediatly(cqr); - dasd_sfree_request(cqr, cqr->device); + dasd_sfree_request(cqr, cqr->memdev); return rc; } @@ -1459,7 +1812,8 @@ dasd_eckd_reserve(struct dasd_device *device) cqr->cpaddr->flags |= CCW_FLAG_SLI; cqr->cpaddr->count = 32; cqr->cpaddr->cda = (__u32)(addr_t) cqr->data; - cqr->device = device; + cqr->startdev = device; + cqr->memdev = device; clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags); set_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags); cqr->retries = 2; /* set retry counter to enable basic ERP */ @@ -1469,7 +1823,7 @@ dasd_eckd_reserve(struct dasd_device *device) rc = dasd_sleep_on_immediatly(cqr); - dasd_sfree_request(cqr, cqr->device); + dasd_sfree_request(cqr, cqr->memdev); return rc; } @@ -1498,7 +1852,8 @@ dasd_eckd_steal_lock(struct dasd_device *device) cqr->cpaddr->flags |= CCW_FLAG_SLI; cqr->cpaddr->count = 32; cqr->cpaddr->cda = (__u32)(addr_t) cqr->data; - cqr->device = device; + cqr->startdev = device; + cqr->memdev = device; clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags); set_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags); cqr->retries = 2; /* set retry counter to enable basic ERP */ @@ -1508,7 +1863,7 @@ dasd_eckd_steal_lock(struct dasd_device *device) rc = dasd_sleep_on_immediatly(cqr); - dasd_sfree_request(cqr, cqr->device); + dasd_sfree_request(cqr, cqr->memdev); return rc; } @@ -1526,52 +1881,52 @@ dasd_eckd_performance(struct dasd_device *device, void __user *argp) cqr = dasd_smalloc_request(dasd_eckd_discipline.name, 1 /* PSF */ + 1 /* RSSD */ , - (sizeof (struct dasd_psf_prssd_data) + - sizeof (struct dasd_rssd_perf_stats_t)), + (sizeof(struct dasd_psf_prssd_data) + + sizeof(struct dasd_rssd_perf_stats_t)), device); if (IS_ERR(cqr)) { DEV_MESSAGE(KERN_WARNING, device, "%s", "Could not allocate initialization request"); return PTR_ERR(cqr); } - cqr->device = device; + cqr->startdev = device; + cqr->memdev = device; cqr->retries = 0; cqr->expires = 10 * HZ; /* Prepare for Read Subsystem Data */ prssdp = (struct dasd_psf_prssd_data *) cqr->data; - memset(prssdp, 0, sizeof (struct dasd_psf_prssd_data)); + memset(prssdp, 0, sizeof(struct dasd_psf_prssd_data)); prssdp->order = PSF_ORDER_PRSSD; prssdp->suborder = 0x01; /* Performance Statistics */ prssdp->varies[1] = 0x01; /* Perf Statistics for the Subsystem */ ccw = cqr->cpaddr; ccw->cmd_code = DASD_ECKD_CCW_PSF; - ccw->count = sizeof (struct dasd_psf_prssd_data); + ccw->count = sizeof(struct dasd_psf_prssd_data); ccw->flags |= CCW_FLAG_CC; ccw->cda = (__u32)(addr_t) prssdp; /* Read Subsystem Data - Performance Statistics */ stats = (struct dasd_rssd_perf_stats_t *) (prssdp + 1); - memset(stats, 0, sizeof (struct dasd_rssd_perf_stats_t)); + memset(stats, 0, sizeof(struct dasd_rssd_perf_stats_t)); ccw++; ccw->cmd_code = DASD_ECKD_CCW_RSSD; - ccw->count = sizeof (struct dasd_rssd_perf_stats_t); + ccw->count = sizeof(struct dasd_rssd_perf_stats_t); ccw->cda = (__u32)(addr_t) stats; cqr->buildclk = get_clock(); cqr->status = DASD_CQR_FILLED; rc = dasd_sleep_on(cqr); if (rc == 0) { - /* Prepare for Read Subsystem Data */ prssdp = (struct dasd_psf_prssd_data *) cqr->data; stats = (struct dasd_rssd_perf_stats_t *) (prssdp + 1); if (copy_to_user(argp, stats, sizeof(struct dasd_rssd_perf_stats_t))) rc = -EFAULT; } - dasd_sfree_request(cqr, cqr->device); + dasd_sfree_request(cqr, cqr->memdev); return rc; } @@ -1594,7 +1949,7 @@ dasd_eckd_get_attrib(struct dasd_device *device, void __user *argp) rc = 0; if (copy_to_user(argp, (long *) &attrib, - sizeof (struct attrib_data_t))) + sizeof(struct attrib_data_t))) rc = -EFAULT; return rc; @@ -1627,8 +1982,10 @@ dasd_eckd_set_attrib(struct dasd_device *device, void __user *argp) } static int -dasd_eckd_ioctl(struct dasd_device *device, unsigned int cmd, void __user *argp) +dasd_eckd_ioctl(struct dasd_block *block, unsigned int cmd, void __user *argp) { + struct dasd_device *device = block->base; + switch (cmd) { case BIODASDGATTR: return dasd_eckd_get_attrib(device, argp); @@ -1685,9 +2042,8 @@ dasd_eckd_dump_ccw_range(struct ccw1 *from, struct ccw1 *to, char *page) * Print sense data and related channel program. * Parts are printed because printk buffer is only 1024 bytes. */ -static void -dasd_eckd_dump_sense(struct dasd_device *device, struct dasd_ccw_req * req, - struct irb *irb) +static void dasd_eckd_dump_sense(struct dasd_device *device, + struct dasd_ccw_req *req, struct irb *irb) { char *page; struct ccw1 *first, *last, *fail, *from, *to; @@ -1743,37 +2099,40 @@ dasd_eckd_dump_sense(struct dasd_device *device, struct dasd_ccw_req * req, } printk("%s", page); - /* dump the Channel Program (max 140 Bytes per line) */ - /* Count CCW and print first CCWs (maximum 1024 % 140 = 7) */ - first = req->cpaddr; - for (last = first; last->flags & (CCW_FLAG_CC | CCW_FLAG_DC); last++); - to = min(first + 6, last); - len = sprintf(page, KERN_ERR PRINTK_HEADER - " Related CP in req: %p\n", req); - dasd_eckd_dump_ccw_range(first, to, page + len); - printk("%s", page); + if (req) { + /* req == NULL for unsolicited interrupts */ + /* dump the Channel Program (max 140 Bytes per line) */ + /* Count CCW and print first CCWs (maximum 1024 % 140 = 7) */ + first = req->cpaddr; + for (last = first; last->flags & (CCW_FLAG_CC | CCW_FLAG_DC); last++); + to = min(first + 6, last); + len = sprintf(page, KERN_ERR PRINTK_HEADER + " Related CP in req: %p\n", req); + dasd_eckd_dump_ccw_range(first, to, page + len); + printk("%s", page); - /* print failing CCW area (maximum 4) */ - /* scsw->cda is either valid or zero */ - len = 0; - from = ++to; - fail = (struct ccw1 *)(addr_t) irb->scsw.cpa; /* failing CCW */ - if (from < fail - 2) { - from = fail - 2; /* there is a gap - print header */ - len += sprintf(page, KERN_ERR PRINTK_HEADER "......\n"); - } - to = min(fail + 1, last); - len += dasd_eckd_dump_ccw_range(from, to, page + len); - - /* print last CCWs (maximum 2) */ - from = max(from, ++to); - if (from < last - 1) { - from = last - 1; /* there is a gap - print header */ - len += sprintf(page + len, KERN_ERR PRINTK_HEADER "......\n"); + /* print failing CCW area (maximum 4) */ + /* scsw->cda is either valid or zero */ + len = 0; + from = ++to; + fail = (struct ccw1 *)(addr_t) irb->scsw.cpa; /* failing CCW */ + if (from < fail - 2) { + from = fail - 2; /* there is a gap - print header */ + len += sprintf(page, KERN_ERR PRINTK_HEADER "......\n"); + } + to = min(fail + 1, last); + len += dasd_eckd_dump_ccw_range(from, to, page + len); + + /* print last CCWs (maximum 2) */ + from = max(from, ++to); + if (from < last - 1) { + from = last - 1; /* there is a gap - print header */ + len += sprintf(page + len, KERN_ERR PRINTK_HEADER "......\n"); + } + len += dasd_eckd_dump_ccw_range(from, last, page + len); + if (len > 0) + printk("%s", page); } - len += dasd_eckd_dump_ccw_range(from, last, page + len); - if (len > 0) - printk("%s", page); free_page((unsigned long) page); } @@ -1796,16 +2155,20 @@ static struct dasd_discipline dasd_eckd_discipline = { .ebcname = "ECKD", .max_blocks = 240, .check_device = dasd_eckd_check_characteristics, + .uncheck_device = dasd_eckd_uncheck_device, .do_analysis = dasd_eckd_do_analysis, + .ready_to_online = dasd_eckd_ready_to_online, + .online_to_ready = dasd_eckd_online_to_ready, .fill_geometry = dasd_eckd_fill_geometry, .start_IO = dasd_start_IO, .term_IO = dasd_term_IO, + .handle_terminated_request = dasd_eckd_handle_terminated_request, .format_device = dasd_eckd_format_device, - .examine_error = dasd_eckd_examine_error, .erp_action = dasd_eckd_erp_action, .erp_postaction = dasd_eckd_erp_postaction, - .build_cp = dasd_eckd_build_cp, - .free_cp = dasd_eckd_free_cp, + .handle_unsolicited_interrupt = dasd_eckd_handle_unsolicited_interrupt, + .build_cp = dasd_eckd_build_alias_cp, + .free_cp = dasd_eckd_free_alias_cp, .dump_sense = dasd_eckd_dump_sense, .fill_info = dasd_eckd_fill_info, .ioctl = dasd_eckd_ioctl, diff --git a/drivers/s390/block/dasd_eckd.h b/drivers/s390/block/dasd_eckd.h index 712ff1650134..fc2509c939bc 100644 --- a/drivers/s390/block/dasd_eckd.h +++ b/drivers/s390/block/dasd_eckd.h @@ -39,6 +39,8 @@ #define DASD_ECKD_CCW_READ_CKD_MT 0x9e #define DASD_ECKD_CCW_WRITE_CKD_MT 0x9d #define DASD_ECKD_CCW_RESERVE 0xB4 +#define DASD_ECKD_CCW_PFX 0xE7 +#define DASD_ECKD_CCW_RSCK 0xF9 /* * Perform Subsystem Function / Sub-Orders @@ -137,6 +139,25 @@ struct LO_eckd_data { __u16 length; } __attribute__ ((packed)); +/* Prefix data for format 0x00 and 0x01 */ +struct PFX_eckd_data { + unsigned char format; + struct { + unsigned char define_extend:1; + unsigned char time_stamp:1; + unsigned char verify_base:1; + unsigned char hyper_pav:1; + unsigned char reserved:4; + } __attribute__ ((packed)) validity; + __u8 base_address; + __u8 aux; + __u8 base_lss; + __u8 reserved[7]; + struct DE_eckd_data define_extend; + struct LO_eckd_data locate_record; + __u8 LO_extended_data[4]; +} __attribute__ ((packed)); + struct dasd_eckd_characteristics { __u16 cu_type; struct { @@ -254,7 +275,9 @@ struct dasd_eckd_confdata { } __attribute__ ((packed)) ned; struct { unsigned char flags; /* byte 0 */ - unsigned char res2[7]; /* byte 1- 7 */ + unsigned char res1; /* byte 1 */ + __u16 format; /* byte 2-3 */ + unsigned char res2[4]; /* byte 4-7 */ unsigned char sua_flags; /* byte 8 */ __u8 base_unit_addr; /* byte 9 */ unsigned char res3[22]; /* byte 10-31 */ @@ -343,6 +366,11 @@ struct dasd_eckd_path { __u8 npm; }; +struct dasd_rssd_features { + char feature[256]; +} __attribute__((packed)); + + /* * Perform Subsystem Function - Prepare for Read Subsystem Data */ @@ -365,4 +393,99 @@ struct dasd_psf_ssc_data { unsigned char reserved[59]; } __attribute__((packed)); + +/* + * some structures and definitions for alias handling + */ +struct dasd_unit_address_configuration { + struct { + char ua_type; + char base_ua; + } unit[256]; +} __attribute__((packed)); + + +#define MAX_DEVICES_PER_LCU 256 + +/* flags on the LCU */ +#define NEED_UAC_UPDATE 0x01 +#define UPDATE_PENDING 0x02 + +enum pavtype {NO_PAV, BASE_PAV, HYPER_PAV}; + + +struct alias_root { + struct list_head serverlist; + spinlock_t lock; +}; + +struct alias_server { + struct list_head server; + struct dasd_uid uid; + struct list_head lculist; +}; + +struct summary_unit_check_work_data { + char reason; + struct dasd_device *device; + struct work_struct worker; +}; + +struct read_uac_work_data { + struct dasd_device *device; + struct delayed_work dwork; +}; + +struct alias_lcu { + struct list_head lcu; + struct dasd_uid uid; + enum pavtype pav; + char flags; + spinlock_t lock; + struct list_head grouplist; + struct list_head active_devices; + struct list_head inactive_devices; + struct dasd_unit_address_configuration *uac; + struct summary_unit_check_work_data suc_data; + struct read_uac_work_data ruac_data; + struct dasd_ccw_req *rsu_cqr; +}; + +struct alias_pav_group { + struct list_head group; + struct dasd_uid uid; + struct alias_lcu *lcu; + struct list_head baselist; + struct list_head aliaslist; + struct dasd_device *next; +}; + + +struct dasd_eckd_private { + struct dasd_eckd_characteristics rdc_data; + struct dasd_eckd_confdata conf_data; + struct dasd_eckd_path path_data; + struct eckd_count count_area[5]; + int init_cqr_status; + int uses_cdl; + struct attrib_data_t attrib; /* e.g. cache operations */ + struct dasd_rssd_features features; + + /* alias managemnet */ + struct dasd_uid uid; + struct alias_pav_group *pavgroup; + struct alias_lcu *lcu; + int count; +}; + + + +int dasd_alias_make_device_known_to_lcu(struct dasd_device *); +void dasd_alias_disconnect_device_from_lcu(struct dasd_device *); +int dasd_alias_add_device(struct dasd_device *); +int dasd_alias_remove_device(struct dasd_device *); +struct dasd_device *dasd_alias_get_start_dev(struct dasd_device *); +void dasd_alias_handle_summary_unit_check(struct dasd_device *, struct irb *); +void dasd_eckd_reset_ccw_to_base_io(struct dasd_ccw_req *); + #endif /* DASD_ECKD_H */ diff --git a/drivers/s390/block/dasd_eer.c b/drivers/s390/block/dasd_eer.c index 0c081a664ee8..6e53ab606e97 100644 --- a/drivers/s390/block/dasd_eer.c +++ b/drivers/s390/block/dasd_eer.c @@ -336,7 +336,7 @@ static void dasd_eer_write_snss_trigger(struct dasd_device *device, unsigned long flags; struct eerbuffer *eerb; - snss_rc = (cqr->status == DASD_CQR_FAILED) ? -EIO : 0; + snss_rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO; if (snss_rc) data_size = 0; else @@ -404,10 +404,11 @@ void dasd_eer_snss(struct dasd_device *device) set_bit(DASD_FLAG_EER_SNSS, &device->flags); return; } + /* cdev is already locked, can't use dasd_add_request_head */ clear_bit(DASD_FLAG_EER_SNSS, &device->flags); cqr->status = DASD_CQR_QUEUED; - list_add(&cqr->list, &device->ccw_queue); - dasd_schedule_bh(device); + list_add(&cqr->devlist, &device->ccw_queue); + dasd_schedule_device_bh(device); } /* @@ -415,7 +416,7 @@ void dasd_eer_snss(struct dasd_device *device) */ static void dasd_eer_snss_cb(struct dasd_ccw_req *cqr, void *data) { - struct dasd_device *device = cqr->device; + struct dasd_device *device = cqr->startdev; unsigned long flags; dasd_eer_write(device, cqr, DASD_EER_STATECHANGE); @@ -458,7 +459,7 @@ int dasd_eer_enable(struct dasd_device *device) if (!cqr) return -ENOMEM; - cqr->device = device; + cqr->startdev = device; cqr->retries = 255; cqr->expires = 10 * HZ; clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags); diff --git a/drivers/s390/block/dasd_erp.c b/drivers/s390/block/dasd_erp.c index caa5d91420f8..8f10000851a3 100644 --- a/drivers/s390/block/dasd_erp.c +++ b/drivers/s390/block/dasd_erp.c @@ -46,6 +46,8 @@ dasd_alloc_erp_request(char *magic, int cplength, int datasize, if (cqr == NULL) return ERR_PTR(-ENOMEM); memset(cqr, 0, sizeof(struct dasd_ccw_req)); + INIT_LIST_HEAD(&cqr->devlist); + INIT_LIST_HEAD(&cqr->blocklist); data = (char *) cqr + ((sizeof(struct dasd_ccw_req) + 7L) & -8L); cqr->cpaddr = NULL; if (cplength > 0) { @@ -66,7 +68,7 @@ dasd_alloc_erp_request(char *magic, int cplength, int datasize, } void -dasd_free_erp_request(struct dasd_ccw_req * cqr, struct dasd_device * device) +dasd_free_erp_request(struct dasd_ccw_req *cqr, struct dasd_device * device) { unsigned long flags; @@ -81,11 +83,11 @@ dasd_free_erp_request(struct dasd_ccw_req * cqr, struct dasd_device * device) * dasd_default_erp_action just retries the current cqr */ struct dasd_ccw_req * -dasd_default_erp_action(struct dasd_ccw_req * cqr) +dasd_default_erp_action(struct dasd_ccw_req *cqr) { struct dasd_device *device; - device = cqr->device; + device = cqr->startdev; /* just retry - there is nothing to save ... I got no sense data.... */ if (cqr->retries > 0) { @@ -93,12 +95,12 @@ dasd_default_erp_action(struct dasd_ccw_req * cqr) "default ERP called (%i retries left)", cqr->retries); cqr->lpm = LPM_ANYPATH; - cqr->status = DASD_CQR_QUEUED; + cqr->status = DASD_CQR_FILLED; } else { DEV_MESSAGE (KERN_WARNING, device, "%s", "default ERP called (NO retry left)"); cqr->status = DASD_CQR_FAILED; - cqr->stopclk = get_clock (); + cqr->stopclk = get_clock(); } return cqr; } /* end dasd_default_erp_action */ @@ -117,15 +119,12 @@ dasd_default_erp_action(struct dasd_ccw_req * cqr) * RETURN VALUES * cqr pointer to the original CQR */ -struct dasd_ccw_req * -dasd_default_erp_postaction(struct dasd_ccw_req * cqr) +struct dasd_ccw_req *dasd_default_erp_postaction(struct dasd_ccw_req *cqr) { - struct dasd_device *device; int success; BUG_ON(cqr->refers == NULL || cqr->function == NULL); - device = cqr->device; success = cqr->status == DASD_CQR_DONE; /* free all ERPs - but NOT the original cqr */ @@ -133,10 +132,10 @@ dasd_default_erp_postaction(struct dasd_ccw_req * cqr) struct dasd_ccw_req *refers; refers = cqr->refers; - /* remove the request from the device queue */ - list_del(&cqr->list); + /* remove the request from the block queue */ + list_del(&cqr->blocklist); /* free the finished erp request */ - dasd_free_erp_request(cqr, device); + dasd_free_erp_request(cqr, cqr->memdev); cqr = refers; } @@ -157,7 +156,7 @@ dasd_log_sense(struct dasd_ccw_req *cqr, struct irb *irb) { struct dasd_device *device; - device = cqr->device; + device = cqr->startdev; /* dump sense data */ if (device->discipline && device->discipline->dump_sense) device->discipline->dump_sense(device, cqr, irb); diff --git a/drivers/s390/block/dasd_fba.c b/drivers/s390/block/dasd_fba.c index 1d95822e0b8e..d13ea05089a7 100644 --- a/drivers/s390/block/dasd_fba.c +++ b/drivers/s390/block/dasd_fba.c @@ -117,6 +117,7 @@ locate_record(struct ccw1 * ccw, struct LO_fba_data *data, int rw, static int dasd_fba_check_characteristics(struct dasd_device *device) { + struct dasd_block *block; struct dasd_fba_private *private; struct ccw_device *cdev = device->cdev; void *rdc_data; @@ -133,6 +134,16 @@ dasd_fba_check_characteristics(struct dasd_device *device) } device->private = (void *) private; } + block = dasd_alloc_block(); + if (IS_ERR(block)) { + DEV_MESSAGE(KERN_WARNING, device, "%s", + "could not allocate dasd block structure"); + kfree(device->private); + return PTR_ERR(block); + } + device->block = block; + block->base = device; + /* Read Device Characteristics */ rdc_data = (void *) &(private->rdc_data); rc = dasd_generic_read_dev_chars(device, "FBA ", &rdc_data, 32); @@ -155,60 +166,37 @@ dasd_fba_check_characteristics(struct dasd_device *device) return 0; } -static int -dasd_fba_do_analysis(struct dasd_device *device) +static int dasd_fba_do_analysis(struct dasd_block *block) { struct dasd_fba_private *private; int sb, rc; - private = (struct dasd_fba_private *) device->private; + private = (struct dasd_fba_private *) block->base->private; rc = dasd_check_blocksize(private->rdc_data.blk_size); if (rc) { - DEV_MESSAGE(KERN_INFO, device, "unknown blocksize %d", + DEV_MESSAGE(KERN_INFO, block->base, "unknown blocksize %d", private->rdc_data.blk_size); return rc; } - device->blocks = private->rdc_data.blk_bdsa; - device->bp_block = private->rdc_data.blk_size; - device->s2b_shift = 0; /* bits to shift 512 to get a block */ + block->blocks = private->rdc_data.blk_bdsa; + block->bp_block = private->rdc_data.blk_size; + block->s2b_shift = 0; /* bits to shift 512 to get a block */ for (sb = 512; sb < private->rdc_data.blk_size; sb = sb << 1) - device->s2b_shift++; + block->s2b_shift++; return 0; } -static int -dasd_fba_fill_geometry(struct dasd_device *device, struct hd_geometry *geo) +static int dasd_fba_fill_geometry(struct dasd_block *block, + struct hd_geometry *geo) { - if (dasd_check_blocksize(device->bp_block) != 0) + if (dasd_check_blocksize(block->bp_block) != 0) return -EINVAL; - geo->cylinders = (device->blocks << device->s2b_shift) >> 10; + geo->cylinders = (block->blocks << block->s2b_shift) >> 10; geo->heads = 16; - geo->sectors = 128 >> device->s2b_shift; + geo->sectors = 128 >> block->s2b_shift; return 0; } -static dasd_era_t -dasd_fba_examine_error(struct dasd_ccw_req * cqr, struct irb * irb) -{ - struct dasd_device *device; - struct ccw_device *cdev; - - device = (struct dasd_device *) cqr->device; - if (irb->scsw.cstat == 0x00 && - irb->scsw.dstat == (DEV_STAT_CHN_END | DEV_STAT_DEV_END)) - return dasd_era_none; - - cdev = device->cdev; - switch (cdev->id.dev_type) { - case 0x3370: - return dasd_3370_erp_examine(cqr, irb); - case 0x9336: - return dasd_9336_erp_examine(cqr, irb); - default: - return dasd_era_recover; - } -} - static dasd_erp_fn_t dasd_fba_erp_action(struct dasd_ccw_req * cqr) { @@ -221,13 +209,34 @@ dasd_fba_erp_postaction(struct dasd_ccw_req * cqr) if (cqr->function == dasd_default_erp_action) return dasd_default_erp_postaction; - DEV_MESSAGE(KERN_WARNING, cqr->device, "unknown ERP action %p", + DEV_MESSAGE(KERN_WARNING, cqr->startdev, "unknown ERP action %p", cqr->function); return NULL; } -static struct dasd_ccw_req * -dasd_fba_build_cp(struct dasd_device * device, struct request *req) +static void dasd_fba_handle_unsolicited_interrupt(struct dasd_device *device, + struct irb *irb) +{ + char mask; + + /* first of all check for state change pending interrupt */ + mask = DEV_STAT_ATTENTION | DEV_STAT_DEV_END | DEV_STAT_UNIT_EXCEP; + if ((irb->scsw.dstat & mask) == mask) { + dasd_generic_handle_state_change(device); + return; + } + + /* check for unsolicited interrupts */ + DEV_MESSAGE(KERN_DEBUG, device, "%s", + "unsolicited interrupt received"); + device->discipline->dump_sense(device, NULL, irb); + dasd_schedule_device_bh(device); + return; +}; + +static struct dasd_ccw_req *dasd_fba_build_cp(struct dasd_device * memdev, + struct dasd_block *block, + struct request *req) { struct dasd_fba_private *private; unsigned long *idaws; @@ -242,17 +251,17 @@ dasd_fba_build_cp(struct dasd_device * device, struct request *req) unsigned int blksize, off; unsigned char cmd; - private = (struct dasd_fba_private *) device->private; + private = (struct dasd_fba_private *) block->base->private; if (rq_data_dir(req) == READ) { cmd = DASD_FBA_CCW_READ; } else if (rq_data_dir(req) == WRITE) { cmd = DASD_FBA_CCW_WRITE; } else return ERR_PTR(-EINVAL); - blksize = device->bp_block; + blksize = block->bp_block; /* Calculate record id of first and last block. */ - first_rec = req->sector >> device->s2b_shift; - last_rec = (req->sector + req->nr_sectors - 1) >> device->s2b_shift; + first_rec = req->sector >> block->s2b_shift; + last_rec = (req->sector + req->nr_sectors - 1) >> block->s2b_shift; /* Check struct bio and count the number of blocks for the request. */ count = 0; cidaw = 0; @@ -260,7 +269,7 @@ dasd_fba_build_cp(struct dasd_device * device, struct request *req) if (bv->bv_len & (blksize - 1)) /* Fba can only do full blocks. */ return ERR_PTR(-EINVAL); - count += bv->bv_len >> (device->s2b_shift + 9); + count += bv->bv_len >> (block->s2b_shift + 9); #if defined(CONFIG_64BIT) if (idal_is_needed (page_address(bv->bv_page), bv->bv_len)) cidaw += bv->bv_len / blksize; @@ -284,13 +293,13 @@ dasd_fba_build_cp(struct dasd_device * device, struct request *req) } /* Allocate the ccw request. */ cqr = dasd_smalloc_request(dasd_fba_discipline.name, - cplength, datasize, device); + cplength, datasize, memdev); if (IS_ERR(cqr)) return cqr; ccw = cqr->cpaddr; /* First ccw is define extent. */ define_extent(ccw++, cqr->data, rq_data_dir(req), - device->bp_block, req->sector, req->nr_sectors); + block->bp_block, req->sector, req->nr_sectors); /* Build locate_record + read/write ccws. */ idaws = (unsigned long *) (cqr->data + sizeof(struct DE_fba_data)); LO_data = (struct LO_fba_data *) (idaws + cidaw); @@ -326,7 +335,7 @@ dasd_fba_build_cp(struct dasd_device * device, struct request *req) ccw[-1].flags |= CCW_FLAG_CC; } ccw->cmd_code = cmd; - ccw->count = device->bp_block; + ccw->count = block->bp_block; if (idal_is_needed(dst, blksize)) { ccw->cda = (__u32)(addr_t) idaws; ccw->flags = CCW_FLAG_IDA; @@ -342,7 +351,9 @@ dasd_fba_build_cp(struct dasd_device * device, struct request *req) } if (req->cmd_flags & REQ_FAILFAST) set_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags); - cqr->device = device; + cqr->startdev = memdev; + cqr->memdev = memdev; + cqr->block = block; cqr->expires = 5 * 60 * HZ; /* 5 minutes */ cqr->retries = 32; cqr->buildclk = get_clock(); @@ -363,8 +374,8 @@ dasd_fba_free_cp(struct dasd_ccw_req *cqr, struct request *req) if (!dasd_page_cache) goto out; - private = (struct dasd_fba_private *) cqr->device->private; - blksize = cqr->device->bp_block; + private = (struct dasd_fba_private *) cqr->block->base->private; + blksize = cqr->block->bp_block; ccw = cqr->cpaddr; /* Skip over define extent & locate record. */ ccw++; @@ -394,10 +405,15 @@ dasd_fba_free_cp(struct dasd_ccw_req *cqr, struct request *req) } out: status = cqr->status == DASD_CQR_DONE; - dasd_sfree_request(cqr, cqr->device); + dasd_sfree_request(cqr, cqr->memdev); return status; } +static void dasd_fba_handle_terminated_request(struct dasd_ccw_req *cqr) +{ + cqr->status = DASD_CQR_FILLED; +}; + static int dasd_fba_fill_info(struct dasd_device * device, struct dasd_information2_t * info) @@ -546,9 +562,10 @@ static struct dasd_discipline dasd_fba_discipline = { .fill_geometry = dasd_fba_fill_geometry, .start_IO = dasd_start_IO, .term_IO = dasd_term_IO, - .examine_error = dasd_fba_examine_error, + .handle_terminated_request = dasd_fba_handle_terminated_request, .erp_action = dasd_fba_erp_action, .erp_postaction = dasd_fba_erp_postaction, + .handle_unsolicited_interrupt = dasd_fba_handle_unsolicited_interrupt, .build_cp = dasd_fba_build_cp, .free_cp = dasd_fba_free_cp, .dump_sense = dasd_fba_dump_sense, diff --git a/drivers/s390/block/dasd_genhd.c b/drivers/s390/block/dasd_genhd.c index 47ba4462708d..aee6565aaf98 100644 --- a/drivers/s390/block/dasd_genhd.c +++ b/drivers/s390/block/dasd_genhd.c @@ -25,14 +25,15 @@ /* * Allocate and register gendisk structure for device. */ -int -dasd_gendisk_alloc(struct dasd_device *device) +int dasd_gendisk_alloc(struct dasd_block *block) { struct gendisk *gdp; + struct dasd_device *base; int len; /* Make sure the minor for this device exists. */ - if (device->devindex >= DASD_PER_MAJOR) + base = block->base; + if (base->devindex >= DASD_PER_MAJOR) return -EBUSY; gdp = alloc_disk(1 << DASD_PARTN_BITS); @@ -41,9 +42,9 @@ dasd_gendisk_alloc(struct dasd_device *device) /* Initialize gendisk structure. */ gdp->major = DASD_MAJOR; - gdp->first_minor = device->devindex << DASD_PARTN_BITS; + gdp->first_minor = base->devindex << DASD_PARTN_BITS; gdp->fops = &dasd_device_operations; - gdp->driverfs_dev = &device->cdev->dev; + gdp->driverfs_dev = &base->cdev->dev; /* * Set device name. @@ -53,53 +54,51 @@ dasd_gendisk_alloc(struct dasd_device *device) * dasdaaaa - dasdzzzz : 456976 devices, added up = 475252 */ len = sprintf(gdp->disk_name, "dasd"); - if (device->devindex > 25) { - if (device->devindex > 701) { - if (device->devindex > 18277) + if (base->devindex > 25) { + if (base->devindex > 701) { + if (base->devindex > 18277) len += sprintf(gdp->disk_name + len, "%c", - 'a'+(((device->devindex-18278) + 'a'+(((base->devindex-18278) /17576)%26)); len += sprintf(gdp->disk_name + len, "%c", - 'a'+(((device->devindex-702)/676)%26)); + 'a'+(((base->devindex-702)/676)%26)); } len += sprintf(gdp->disk_name + len, "%c", - 'a'+(((device->devindex-26)/26)%26)); + 'a'+(((base->devindex-26)/26)%26)); } - len += sprintf(gdp->disk_name + len, "%c", 'a'+(device->devindex%26)); + len += sprintf(gdp->disk_name + len, "%c", 'a'+(base->devindex%26)); - if (device->features & DASD_FEATURE_READONLY) + if (block->base->features & DASD_FEATURE_READONLY) set_disk_ro(gdp, 1); - gdp->private_data = device; - gdp->queue = device->request_queue; - device->gdp = gdp; - set_capacity(device->gdp, 0); - add_disk(device->gdp); + gdp->private_data = block; + gdp->queue = block->request_queue; + block->gdp = gdp; + set_capacity(block->gdp, 0); + add_disk(block->gdp); return 0; } /* * Unregister and free gendisk structure for device. */ -void -dasd_gendisk_free(struct dasd_device *device) +void dasd_gendisk_free(struct dasd_block *block) { - if (device->gdp) { - del_gendisk(device->gdp); - device->gdp->queue = NULL; - put_disk(device->gdp); - device->gdp = NULL; + if (block->gdp) { + del_gendisk(block->gdp); + block->gdp->queue = NULL; + put_disk(block->gdp); + block->gdp = NULL; } } /* * Trigger a partition detection. */ -int -dasd_scan_partitions(struct dasd_device * device) +int dasd_scan_partitions(struct dasd_block *block) { struct block_device *bdev; - bdev = bdget_disk(device->gdp, 0); + bdev = bdget_disk(block->gdp, 0); if (!bdev || blkdev_get(bdev, FMODE_READ, 1) < 0) return -ENODEV; /* @@ -117,7 +116,7 @@ dasd_scan_partitions(struct dasd_device * device) * is why the assignment to device->bdev is done AFTER * the BLKRRPART ioctl. */ - device->bdev = bdev; + block->bdev = bdev; return 0; } @@ -125,8 +124,7 @@ dasd_scan_partitions(struct dasd_device * device) * Remove all inodes in the system for a device, delete the * partitions and make device unusable by setting its size to zero. */ -void -dasd_destroy_partitions(struct dasd_device * device) +void dasd_destroy_partitions(struct dasd_block *block) { /* The two structs have 168/176 byte on 31/64 bit. */ struct blkpg_partition bpart; @@ -137,8 +135,8 @@ dasd_destroy_partitions(struct dasd_device * device) * Get the bdev pointer from the device structure and clear * device->bdev to lower the offline open_count limit again. */ - bdev = device->bdev; - device->bdev = NULL; + bdev = block->bdev; + block->bdev = NULL; /* * See fs/partition/check.c:delete_partition @@ -149,17 +147,16 @@ dasd_destroy_partitions(struct dasd_device * device) memset(&barg, 0, sizeof(struct blkpg_ioctl_arg)); barg.data = (void __force __user *) &bpart; barg.op = BLKPG_DEL_PARTITION; - for (bpart.pno = device->gdp->minors - 1; bpart.pno > 0; bpart.pno--) + for (bpart.pno = block->gdp->minors - 1; bpart.pno > 0; bpart.pno--) ioctl_by_bdev(bdev, BLKPG, (unsigned long) &barg); - invalidate_partition(device->gdp, 0); + invalidate_partition(block->gdp, 0); /* Matching blkdev_put to the blkdev_get in dasd_scan_partitions. */ blkdev_put(bdev); - set_capacity(device->gdp, 0); + set_capacity(block->gdp, 0); } -int -dasd_gendisk_init(void) +int dasd_gendisk_init(void) { int rc; @@ -174,8 +171,7 @@ dasd_gendisk_init(void) return 0; } -void -dasd_gendisk_exit(void) +void dasd_gendisk_exit(void) { unregister_blkdev(DASD_MAJOR, "dasd"); } diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h index d427daeef511..44b2984dfbee 100644 --- a/drivers/s390/block/dasd_int.h +++ b/drivers/s390/block/dasd_int.h @@ -64,13 +64,7 @@ * SECTION: Type definitions */ struct dasd_device; - -typedef enum { - dasd_era_fatal = -1, /* no chance to recover */ - dasd_era_none = 0, /* don't recover, everything alright */ - dasd_era_msg = 1, /* don't recover, just report... */ - dasd_era_recover = 2 /* recovery action recommended */ -} dasd_era_t; +struct dasd_block; /* BIT DEFINITIONS FOR SENSE DATA */ #define DASD_SENSE_BIT_0 0x80 @@ -151,19 +145,22 @@ do { \ struct dasd_ccw_req { unsigned int magic; /* Eye catcher */ - struct list_head list; /* list_head for request queueing. */ + struct list_head devlist; /* for dasd_device request queue */ + struct list_head blocklist; /* for dasd_block request queue */ /* Where to execute what... */ - struct dasd_device *device; /* device the request is for */ + struct dasd_block *block; /* the originating block device */ + struct dasd_device *memdev; /* the device used to allocate this */ + struct dasd_device *startdev; /* device the request is started on */ struct ccw1 *cpaddr; /* address of channel program */ - char status; /* status of this request */ + char status; /* status of this request */ short retries; /* A retry counter */ unsigned long flags; /* flags of this request */ /* ... and how */ unsigned long starttime; /* jiffies time of request start */ int expires; /* expiration period in jiffies */ - char lpm; /* logical path mask */ + char lpm; /* logical path mask */ void *data; /* pointer to data area */ /* these are important for recovering erroneous requests */ @@ -178,20 +175,27 @@ struct dasd_ccw_req { unsigned long long endclk; /* TOD-clock of request termination */ /* Callback that is called after reaching final status. */ - void (*callback)(struct dasd_ccw_req *, void *data); - void *callback_data; + void (*callback)(struct dasd_ccw_req *, void *data); + void *callback_data; }; /* * dasd_ccw_req -> status can be: */ -#define DASD_CQR_FILLED 0x00 /* request is ready to be processed */ -#define DASD_CQR_QUEUED 0x01 /* request is queued to be processed */ -#define DASD_CQR_IN_IO 0x02 /* request is currently in IO */ -#define DASD_CQR_DONE 0x03 /* request is completed successfully */ -#define DASD_CQR_ERROR 0x04 /* request is completed with error */ -#define DASD_CQR_FAILED 0x05 /* request is finally failed */ -#define DASD_CQR_CLEAR 0x06 /* request is clear pending */ +#define DASD_CQR_FILLED 0x00 /* request is ready to be processed */ +#define DASD_CQR_DONE 0x01 /* request is completed successfully */ +#define DASD_CQR_NEED_ERP 0x02 /* request needs recovery action */ +#define DASD_CQR_IN_ERP 0x03 /* request is in recovery */ +#define DASD_CQR_FAILED 0x04 /* request is finally failed */ +#define DASD_CQR_TERMINATED 0x05 /* request was stopped by driver */ + +#define DASD_CQR_QUEUED 0x80 /* request is queued to be processed */ +#define DASD_CQR_IN_IO 0x81 /* request is currently in IO */ +#define DASD_CQR_ERROR 0x82 /* request is completed with error */ +#define DASD_CQR_CLEAR_PENDING 0x83 /* request is clear pending */ +#define DASD_CQR_CLEARED 0x84 /* request was cleared */ +#define DASD_CQR_SUCCESS 0x85 /* request was successfull */ + /* per dasd_ccw_req flags */ #define DASD_CQR_FLAGS_USE_ERP 0 /* use ERP for this request */ @@ -214,52 +218,71 @@ struct dasd_discipline { struct list_head list; /* used for list of disciplines */ - /* - * Device recognition functions. check_device is used to verify - * the sense data and the information returned by read device - * characteristics. It returns 0 if the discipline can be used - * for the device in question. - * do_analysis is used in the step from device state "basic" to - * state "accept". It returns 0 if the device can be made ready, - * it returns -EMEDIUMTYPE if the device can't be made ready or - * -EAGAIN if do_analysis started a ccw that needs to complete - * before the analysis may be repeated. - */ - int (*check_device)(struct dasd_device *); - int (*do_analysis) (struct dasd_device *); - - /* - * Device operation functions. build_cp creates a ccw chain for - * a block device request, start_io starts the request and - * term_IO cancels it (e.g. in case of a timeout). format_device - * returns a ccw chain to be used to format the device. - */ + /* + * Device recognition functions. check_device is used to verify + * the sense data and the information returned by read device + * characteristics. It returns 0 if the discipline can be used + * for the device in question. uncheck_device is called during + * device shutdown to deregister a device from its discipline. + */ + int (*check_device) (struct dasd_device *); + void (*uncheck_device) (struct dasd_device *); + + /* + * do_analysis is used in the step from device state "basic" to + * state "accept". It returns 0 if the device can be made ready, + * it returns -EMEDIUMTYPE if the device can't be made ready or + * -EAGAIN if do_analysis started a ccw that needs to complete + * before the analysis may be repeated. + */ + int (*do_analysis) (struct dasd_block *); + + /* + * Last things to do when a device is set online, and first things + * when it is set offline. + */ + int (*ready_to_online) (struct dasd_device *); + int (*online_to_ready) (struct dasd_device *); + + /* + * Device operation functions. build_cp creates a ccw chain for + * a block device request, start_io starts the request and + * term_IO cancels it (e.g. in case of a timeout). format_device + * returns a ccw chain to be used to format the device. + * handle_terminated_request allows to examine a cqr and prepare + * it for retry. + */ struct dasd_ccw_req *(*build_cp) (struct dasd_device *, + struct dasd_block *, struct request *); int (*start_IO) (struct dasd_ccw_req *); int (*term_IO) (struct dasd_ccw_req *); + void (*handle_terminated_request) (struct dasd_ccw_req *); struct dasd_ccw_req *(*format_device) (struct dasd_device *, struct format_data_t *); int (*free_cp) (struct dasd_ccw_req *, struct request *); - /* - * Error recovery functions. examine_error() returns a value that - * indicates what to do for an error condition. If examine_error() + + /* + * Error recovery functions. examine_error() returns a value that + * indicates what to do for an error condition. If examine_error() * returns 'dasd_era_recover' erp_action() is called to create a - * special error recovery ccw. erp_postaction() is called after - * an error recovery ccw has finished its execution. dump_sense - * is called for every error condition to print the sense data - * to the console. - */ - dasd_era_t(*examine_error) (struct dasd_ccw_req *, struct irb *); + * special error recovery ccw. erp_postaction() is called after + * an error recovery ccw has finished its execution. dump_sense + * is called for every error condition to print the sense data + * to the console. + */ dasd_erp_fn_t(*erp_action) (struct dasd_ccw_req *); dasd_erp_fn_t(*erp_postaction) (struct dasd_ccw_req *); void (*dump_sense) (struct dasd_device *, struct dasd_ccw_req *, struct irb *); + void (*handle_unsolicited_interrupt) (struct dasd_device *, + struct irb *); + /* i/o control functions. */ - int (*fill_geometry) (struct dasd_device *, struct hd_geometry *); + int (*fill_geometry) (struct dasd_block *, struct hd_geometry *); int (*fill_info) (struct dasd_device *, struct dasd_information2_t *); - int (*ioctl) (struct dasd_device *, unsigned int, void __user *); + int (*ioctl) (struct dasd_block *, unsigned int, void __user *); }; extern struct dasd_discipline *dasd_diag_discipline_pointer; @@ -267,12 +290,18 @@ extern struct dasd_discipline *dasd_diag_discipline_pointer; /* * Unique identifier for dasd device. */ +#define UA_NOT_CONFIGURED 0x00 +#define UA_BASE_DEVICE 0x01 +#define UA_BASE_PAV_ALIAS 0x02 +#define UA_HYPER_PAV_ALIAS 0x03 + struct dasd_uid { - __u8 alias; + __u8 type; char vendor[4]; char serial[15]; __u16 ssid; - __u8 unit_addr; + __u8 real_unit_addr; + __u8 base_unit_addr; }; /* @@ -293,14 +322,9 @@ struct dasd_uid { struct dasd_device { /* Block device stuff. */ - struct gendisk *gdp; - struct request_queue *request_queue; - spinlock_t request_queue_lock; - struct block_device *bdev; + struct dasd_block *block; + unsigned int devindex; - unsigned long blocks; /* size of volume in blocks */ - unsigned int bp_block; /* bytes per block */ - unsigned int s2b_shift; /* log2 (bp_block/512) */ unsigned long flags; /* per device flags */ unsigned short features; /* copy of devmap-features (read-only!) */ @@ -316,9 +340,8 @@ struct dasd_device { int state, target; int stopped; /* device (ccw_device_start) was stopped */ - /* Open and reference count. */ + /* reference count. */ atomic_t ref_count; - atomic_t open_count; /* ccw queue and memory for static ccw/erp buffers. */ struct list_head ccw_queue; @@ -337,20 +360,45 @@ struct dasd_device { struct ccw_device *cdev; + /* hook for alias management */ + struct list_head alias_list; +}; + +struct dasd_block { + /* Block device stuff. */ + struct gendisk *gdp; + struct request_queue *request_queue; + spinlock_t request_queue_lock; + struct block_device *bdev; + atomic_t open_count; + + unsigned long blocks; /* size of volume in blocks */ + unsigned int bp_block; /* bytes per block */ + unsigned int s2b_shift; /* log2 (bp_block/512) */ + + struct dasd_device *base; + struct list_head ccw_queue; + spinlock_t queue_lock; + + atomic_t tasklet_scheduled; + struct tasklet_struct tasklet; + struct timer_list timer; + #ifdef CONFIG_DASD_PROFILE struct dasd_profile_info_t profile; #endif }; + + /* reasons why device (ccw_device_start) was stopped */ #define DASD_STOPPED_NOT_ACC 1 /* not accessible */ #define DASD_STOPPED_QUIESCE 2 /* Quiesced */ #define DASD_STOPPED_PENDING 4 /* long busy */ #define DASD_STOPPED_DC_WAIT 8 /* disconnected, wait */ -#define DASD_STOPPED_DC_EIO 16 /* disconnected, return -EIO */ +#define DASD_STOPPED_SU 16 /* summary unit check handling */ /* per device flags */ -#define DASD_FLAG_DSC_ERROR 2 /* return -EIO when disconnected */ #define DASD_FLAG_OFFLINE 3 /* device is in offline processing */ #define DASD_FLAG_EER_SNSS 4 /* A SNSS is required */ #define DASD_FLAG_EER_IN_USE 5 /* A SNSS request is running */ @@ -489,6 +537,9 @@ dasd_kmalloc_set_cda(struct ccw1 *ccw, void *cda, struct dasd_device *device) struct dasd_device *dasd_alloc_device(void); void dasd_free_device(struct dasd_device *); +struct dasd_block *dasd_alloc_block(void); +void dasd_free_block(struct dasd_block *); + void dasd_enable_device(struct dasd_device *); void dasd_set_target_state(struct dasd_device *, int); void dasd_kick_device(struct dasd_device *); @@ -497,18 +548,23 @@ void dasd_add_request_head(struct dasd_ccw_req *); void dasd_add_request_tail(struct dasd_ccw_req *); int dasd_start_IO(struct dasd_ccw_req *); int dasd_term_IO(struct dasd_ccw_req *); -void dasd_schedule_bh(struct dasd_device *); +void dasd_schedule_device_bh(struct dasd_device *); +void dasd_schedule_block_bh(struct dasd_block *); int dasd_sleep_on(struct dasd_ccw_req *); int dasd_sleep_on_immediatly(struct dasd_ccw_req *); int dasd_sleep_on_interruptible(struct dasd_ccw_req *); -void dasd_set_timer(struct dasd_device *, int); -void dasd_clear_timer(struct dasd_device *); +void dasd_device_set_timer(struct dasd_device *, int); +void dasd_device_clear_timer(struct dasd_device *); +void dasd_block_set_timer(struct dasd_block *, int); +void dasd_block_clear_timer(struct dasd_block *); int dasd_cancel_req(struct dasd_ccw_req *); +int dasd_flush_device_queue(struct dasd_device *); int dasd_generic_probe (struct ccw_device *, struct dasd_discipline *); void dasd_generic_remove (struct ccw_device *cdev); int dasd_generic_set_online(struct ccw_device *, struct dasd_discipline *); int dasd_generic_set_offline (struct ccw_device *cdev); int dasd_generic_notify(struct ccw_device *, int); +void dasd_generic_handle_state_change(struct dasd_device *); int dasd_generic_read_dev_chars(struct dasd_device *, char *, void **, int); @@ -542,10 +598,10 @@ int dasd_busid_known(char *); /* externals in dasd_gendisk.c */ int dasd_gendisk_init(void); void dasd_gendisk_exit(void); -int dasd_gendisk_alloc(struct dasd_device *); -void dasd_gendisk_free(struct dasd_device *); -int dasd_scan_partitions(struct dasd_device *); -void dasd_destroy_partitions(struct dasd_device *); +int dasd_gendisk_alloc(struct dasd_block *); +void dasd_gendisk_free(struct dasd_block *); +int dasd_scan_partitions(struct dasd_block *); +void dasd_destroy_partitions(struct dasd_block *); /* externals in dasd_ioctl.c */ int dasd_ioctl(struct inode *, struct file *, unsigned int, unsigned long); @@ -563,20 +619,9 @@ struct dasd_ccw_req *dasd_alloc_erp_request(char *, int, int, void dasd_free_erp_request(struct dasd_ccw_req *, struct dasd_device *); void dasd_log_sense(struct dasd_ccw_req *, struct irb *); -/* externals in dasd_3370_erp.c */ -dasd_era_t dasd_3370_erp_examine(struct dasd_ccw_req *, struct irb *); - /* externals in dasd_3990_erp.c */ -dasd_era_t dasd_3990_erp_examine(struct dasd_ccw_req *, struct irb *); struct dasd_ccw_req *dasd_3990_erp_action(struct dasd_ccw_req *); -/* externals in dasd_9336_erp.c */ -dasd_era_t dasd_9336_erp_examine(struct dasd_ccw_req *, struct irb *); - -/* externals in dasd_9336_erp.c */ -dasd_era_t dasd_9343_erp_examine(struct dasd_ccw_req *, struct irb *); -struct dasd_ccw_req *dasd_9343_erp_action(struct dasd_ccw_req *); - /* externals in dasd_eer.c */ #ifdef CONFIG_DASD_EER int dasd_eer_init(void); diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c index 672eb0a3dd0b..91a64630cb0f 100644 --- a/drivers/s390/block/dasd_ioctl.c +++ b/drivers/s390/block/dasd_ioctl.c @@ -38,15 +38,15 @@ dasd_ioctl_api_version(void __user *argp) static int dasd_ioctl_enable(struct block_device *bdev) { - struct dasd_device *device = bdev->bd_disk->private_data; + struct dasd_block *block = bdev->bd_disk->private_data; if (!capable(CAP_SYS_ADMIN)) return -EACCES; - dasd_enable_device(device); + dasd_enable_device(block->base); /* Formatting the dasd device can change the capacity. */ mutex_lock(&bdev->bd_mutex); - i_size_write(bdev->bd_inode, (loff_t)get_capacity(device->gdp) << 9); + i_size_write(bdev->bd_inode, (loff_t)get_capacity(block->gdp) << 9); mutex_unlock(&bdev->bd_mutex); return 0; } @@ -58,7 +58,7 @@ dasd_ioctl_enable(struct block_device *bdev) static int dasd_ioctl_disable(struct block_device *bdev) { - struct dasd_device *device = bdev->bd_disk->private_data; + struct dasd_block *block = bdev->bd_disk->private_data; if (!capable(CAP_SYS_ADMIN)) return -EACCES; @@ -71,7 +71,7 @@ dasd_ioctl_disable(struct block_device *bdev) * using the BIODASDFMT ioctl. Therefore the correct state for the * device is DASD_STATE_BASIC that allows to do basic i/o. */ - dasd_set_target_state(device, DASD_STATE_BASIC); + dasd_set_target_state(block->base, DASD_STATE_BASIC); /* * Set i_size to zero, since read, write, etc. check against this * value. @@ -85,19 +85,19 @@ dasd_ioctl_disable(struct block_device *bdev) /* * Quiesce device. */ -static int -dasd_ioctl_quiesce(struct dasd_device *device) +static int dasd_ioctl_quiesce(struct dasd_block *block) { unsigned long flags; + struct dasd_device *base; + base = block->base; if (!capable (CAP_SYS_ADMIN)) return -EACCES; - DEV_MESSAGE (KERN_DEBUG, device, "%s", - "Quiesce IO on device"); - spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); - device->stopped |= DASD_STOPPED_QUIESCE; - spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); + DEV_MESSAGE(KERN_DEBUG, base, "%s", "Quiesce IO on device"); + spin_lock_irqsave(get_ccwdev_lock(base->cdev), flags); + base->stopped |= DASD_STOPPED_QUIESCE; + spin_unlock_irqrestore(get_ccwdev_lock(base->cdev), flags); return 0; } @@ -105,22 +105,21 @@ dasd_ioctl_quiesce(struct dasd_device *device) /* * Quiesce device. */ -static int -dasd_ioctl_resume(struct dasd_device *device) +static int dasd_ioctl_resume(struct dasd_block *block) { unsigned long flags; + struct dasd_device *base; + base = block->base; if (!capable (CAP_SYS_ADMIN)) return -EACCES; - DEV_MESSAGE (KERN_DEBUG, device, "%s", - "resume IO on device"); - - spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); - device->stopped &= ~DASD_STOPPED_QUIESCE; - spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); + DEV_MESSAGE(KERN_DEBUG, base, "%s", "resume IO on device"); + spin_lock_irqsave(get_ccwdev_lock(base->cdev), flags); + base->stopped &= ~DASD_STOPPED_QUIESCE; + spin_unlock_irqrestore(get_ccwdev_lock(base->cdev), flags); - dasd_schedule_bh (device); + dasd_schedule_block_bh(block); return 0; } @@ -130,22 +129,23 @@ dasd_ioctl_resume(struct dasd_device *device) * commands to format a single unit of the device. In terms of the ECKD * devices this means CCWs are generated to format a single track. */ -static int -dasd_format(struct dasd_device * device, struct format_data_t * fdata) +static int dasd_format(struct dasd_block *block, struct format_data_t *fdata) { struct dasd_ccw_req *cqr; + struct dasd_device *base; int rc; - if (device->discipline->format_device == NULL) + base = block->base; + if (base->discipline->format_device == NULL) return -EPERM; - if (device->state != DASD_STATE_BASIC) { - DEV_MESSAGE(KERN_WARNING, device, "%s", + if (base->state != DASD_STATE_BASIC) { + DEV_MESSAGE(KERN_WARNING, base, "%s", "dasd_format: device is not disabled! "); return -EBUSY; } - DBF_DEV_EVENT(DBF_NOTICE, device, + DBF_DEV_EVENT(DBF_NOTICE, base, "formatting units %d to %d (%d B blocks) flags %d", fdata->start_unit, fdata->stop_unit, fdata->blksize, fdata->intensity); @@ -156,20 +156,20 @@ dasd_format(struct dasd_device * device, struct format_data_t * fdata) * enabling the device later. */ if (fdata->start_unit == 0) { - struct block_device *bdev = bdget_disk(device->gdp, 0); + struct block_device *bdev = bdget_disk(block->gdp, 0); bdev->bd_inode->i_blkbits = blksize_bits(fdata->blksize); bdput(bdev); } while (fdata->start_unit <= fdata->stop_unit) { - cqr = device->discipline->format_device(device, fdata); + cqr = base->discipline->format_device(base, fdata); if (IS_ERR(cqr)) return PTR_ERR(cqr); rc = dasd_sleep_on_interruptible(cqr); - dasd_sfree_request(cqr, cqr->device); + dasd_sfree_request(cqr, cqr->memdev); if (rc) { if (rc != -ERESTARTSYS) - DEV_MESSAGE(KERN_ERR, device, + DEV_MESSAGE(KERN_ERR, base, " Formatting of unit %d failed " "with rc = %d", fdata->start_unit, rc); @@ -186,7 +186,7 @@ dasd_format(struct dasd_device * device, struct format_data_t * fdata) static int dasd_ioctl_format(struct block_device *bdev, void __user *argp) { - struct dasd_device *device = bdev->bd_disk->private_data; + struct dasd_block *block = bdev->bd_disk->private_data; struct format_data_t fdata; if (!capable(CAP_SYS_ADMIN)) @@ -194,51 +194,47 @@ dasd_ioctl_format(struct block_device *bdev, void __user *argp) if (!argp) return -EINVAL; - if (device->features & DASD_FEATURE_READONLY) + if (block->base->features & DASD_FEATURE_READONLY) return -EROFS; if (copy_from_user(&fdata, argp, sizeof(struct format_data_t))) return -EFAULT; if (bdev != bdev->bd_contains) { - DEV_MESSAGE(KERN_WARNING, device, "%s", + DEV_MESSAGE(KERN_WARNING, block->base, "%s", "Cannot low-level format a partition"); return -EINVAL; } - return dasd_format(device, &fdata); + return dasd_format(block, &fdata); } #ifdef CONFIG_DASD_PROFILE /* * Reset device profile information */ -static int -dasd_ioctl_reset_profile(struct dasd_device *device) +static int dasd_ioctl_reset_profile(struct dasd_block *block) { - memset(&device->profile, 0, sizeof (struct dasd_profile_info_t)); + memset(&block->profile, 0, sizeof(struct dasd_profile_info_t)); return 0; } /* * Return device profile information */ -static int -dasd_ioctl_read_profile(struct dasd_device *device, void __user *argp) +static int dasd_ioctl_read_profile(struct dasd_block *block, void __user *argp) { if (dasd_profile_level == DASD_PROFILE_OFF) return -EIO; - if (copy_to_user(argp, &device->profile, - sizeof (struct dasd_profile_info_t))) + if (copy_to_user(argp, &block->profile, + sizeof(struct dasd_profile_info_t))) return -EFAULT; return 0; } #else -static int -dasd_ioctl_reset_profile(struct dasd_device *device) +static int dasd_ioctl_reset_profile(struct dasd_block *block) { return -ENOSYS; } -static int -dasd_ioctl_read_profile(struct dasd_device *device, void __user *argp) +static int dasd_ioctl_read_profile(struct dasd_block *block, void __user *argp) { return -ENOSYS; } @@ -247,87 +243,88 @@ dasd_ioctl_read_profile(struct dasd_device *device, void __user *argp) /* * Return dasd information. Used for BIODASDINFO and BIODASDINFO2. */ -static int -dasd_ioctl_information(struct dasd_device *device, - unsigned int cmd, void __user *argp) +static int dasd_ioctl_information(struct dasd_block *block, + unsigned int cmd, void __user *argp) { struct dasd_information2_t *dasd_info; unsigned long flags; int rc; + struct dasd_device *base; struct ccw_device *cdev; struct ccw_dev_id dev_id; - if (!device->discipline->fill_info) + base = block->base; + if (!base->discipline->fill_info) return -EINVAL; dasd_info = kzalloc(sizeof(struct dasd_information2_t), GFP_KERNEL); if (dasd_info == NULL) return -ENOMEM; - rc = device->discipline->fill_info(device, dasd_info); + rc = base->discipline->fill_info(base, dasd_info); if (rc) { kfree(dasd_info); return rc; } - cdev = device->cdev; + cdev = base->cdev; ccw_device_get_id(cdev, &dev_id); dasd_info->devno = dev_id.devno; - dasd_info->schid = _ccw_device_get_subchannel_number(device->cdev); + dasd_info->schid = _ccw_device_get_subchannel_number(base->cdev); dasd_info->cu_type = cdev->id.cu_type; dasd_info->cu_model = cdev->id.cu_model; dasd_info->dev_type = cdev->id.dev_type; dasd_info->dev_model = cdev->id.dev_model; - dasd_info->status = device->state; + dasd_info->status = base->state; /* * The open_count is increased for every opener, that includes * the blkdev_get in dasd_scan_partitions. * This must be hidden from user-space. */ - dasd_info->open_count = atomic_read(&device->open_count); - if (!device->bdev) + dasd_info->open_count = atomic_read(&block->open_count); + if (!block->bdev) dasd_info->open_count++; /* * check if device is really formatted * LDL / CDL was returned by 'fill_info' */ - if ((device->state < DASD_STATE_READY) || - (dasd_check_blocksize(device->bp_block))) + if ((base->state < DASD_STATE_READY) || + (dasd_check_blocksize(block->bp_block))) dasd_info->format = DASD_FORMAT_NONE; dasd_info->features |= - ((device->features & DASD_FEATURE_READONLY) != 0); + ((base->features & DASD_FEATURE_READONLY) != 0); - if (device->discipline) - memcpy(dasd_info->type, device->discipline->name, 4); + if (base->discipline) + memcpy(dasd_info->type, base->discipline->name, 4); else memcpy(dasd_info->type, "none", 4); - if (device->request_queue->request_fn) { + if (block->request_queue->request_fn) { struct list_head *l; #ifdef DASD_EXTENDED_PROFILING { struct list_head *l; - spin_lock_irqsave(&device->lock, flags); - list_for_each(l, &device->request_queue->queue_head) + spin_lock_irqsave(&block->lock, flags); + list_for_each(l, &block->request_queue->queue_head) dasd_info->req_queue_len++; - spin_unlock_irqrestore(&device->lock, flags); + spin_unlock_irqrestore(&block->lock, flags); } #endif /* DASD_EXTENDED_PROFILING */ - spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); - list_for_each(l, &device->ccw_queue) + spin_lock_irqsave(get_ccwdev_lock(base->cdev), flags); + list_for_each(l, &base->ccw_queue) dasd_info->chanq_len++; - spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), + spin_unlock_irqrestore(get_ccwdev_lock(base->cdev), flags); } rc = 0; if (copy_to_user(argp, dasd_info, ((cmd == (unsigned int) BIODASDINFO2) ? - sizeof (struct dasd_information2_t) : - sizeof (struct dasd_information_t)))) + sizeof(struct dasd_information2_t) : + sizeof(struct dasd_information_t)))) rc = -EFAULT; kfree(dasd_info); return rc; @@ -339,7 +336,7 @@ dasd_ioctl_information(struct dasd_device *device, static int dasd_ioctl_set_ro(struct block_device *bdev, void __user *argp) { - struct dasd_device *device = bdev->bd_disk->private_data; + struct dasd_block *block = bdev->bd_disk->private_data; int intval; if (!capable(CAP_SYS_ADMIN)) @@ -351,11 +348,10 @@ dasd_ioctl_set_ro(struct block_device *bdev, void __user *argp) return -EFAULT; set_disk_ro(bdev->bd_disk, intval); - return dasd_set_feature(device->cdev, DASD_FEATURE_READONLY, intval); + return dasd_set_feature(block->base->cdev, DASD_FEATURE_READONLY, intval); } -static int -dasd_ioctl_readall_cmb(struct dasd_device *device, unsigned int cmd, +static int dasd_ioctl_readall_cmb(struct dasd_block *block, unsigned int cmd, unsigned long arg) { struct cmbdata __user *argp = (void __user *) arg; @@ -363,7 +359,7 @@ dasd_ioctl_readall_cmb(struct dasd_device *device, unsigned int cmd, struct cmbdata data; int ret; - ret = cmf_readall(device->cdev, &data); + ret = cmf_readall(block->base->cdev, &data); if (!ret && copy_to_user(argp, &data, min(size, sizeof(*argp)))) return -EFAULT; return ret; @@ -374,10 +370,10 @@ dasd_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { struct block_device *bdev = inode->i_bdev; - struct dasd_device *device = bdev->bd_disk->private_data; + struct dasd_block *block = bdev->bd_disk->private_data; void __user *argp = (void __user *)arg; - if (!device) + if (!block) return -ENODEV; if ((_IOC_DIR(cmd) != _IOC_NONE) && !arg) { @@ -391,33 +387,33 @@ dasd_ioctl(struct inode *inode, struct file *file, case BIODASDENABLE: return dasd_ioctl_enable(bdev); case BIODASDQUIESCE: - return dasd_ioctl_quiesce(device); + return dasd_ioctl_quiesce(block); case BIODASDRESUME: - return dasd_ioctl_resume(device); + return dasd_ioctl_resume(block); case BIODASDFMT: return dasd_ioctl_format(bdev, argp); case BIODASDINFO: - return dasd_ioctl_information(device, cmd, argp); + return dasd_ioctl_information(block, cmd, argp); case BIODASDINFO2: - return dasd_ioctl_information(device, cmd, argp); + return dasd_ioctl_information(block, cmd, argp); case BIODASDPRRD: - return dasd_ioctl_read_profile(device, argp); + return dasd_ioctl_read_profile(block, argp); case BIODASDPRRST: - return dasd_ioctl_reset_profile(device); + return dasd_ioctl_reset_profile(block); case BLKROSET: return dasd_ioctl_set_ro(bdev, argp); case DASDAPIVER: return dasd_ioctl_api_version(argp); case BIODASDCMFENABLE: - return enable_cmf(device->cdev); + return enable_cmf(block->base->cdev); case BIODASDCMFDISABLE: - return disable_cmf(device->cdev); + return disable_cmf(block->base->cdev); case BIODASDREADALLCMB: - return dasd_ioctl_readall_cmb(device, cmd, arg); + return dasd_ioctl_readall_cmb(block, cmd, arg); default: /* if the discipline has an ioctl method try it. */ - if (device->discipline->ioctl) { - int rval = device->discipline->ioctl(device, cmd, argp); + if (block->base->discipline->ioctl) { + int rval = block->base->discipline->ioctl(block, cmd, argp); if (rval != -ENOIOCTLCMD) return rval; } diff --git a/drivers/s390/block/dasd_proc.c b/drivers/s390/block/dasd_proc.c index ac7e8ef504cb..0584a7dc5ede 100644 --- a/drivers/s390/block/dasd_proc.c +++ b/drivers/s390/block/dasd_proc.c @@ -54,11 +54,16 @@ static int dasd_devices_show(struct seq_file *m, void *v) { struct dasd_device *device; + struct dasd_block *block; char *substr; device = dasd_device_from_devindex((unsigned long) v - 1); if (IS_ERR(device)) return 0; + if (device->block) + block = device->block; + else + return 0; /* Print device number. */ seq_printf(m, "%s", device->cdev->dev.bus_id); /* Print discipline string. */ @@ -67,14 +72,14 @@ dasd_devices_show(struct seq_file *m, void *v) else seq_printf(m, "(none)"); /* Print kdev. */ - if (device->gdp) + if (block->gdp) seq_printf(m, " at (%3d:%6d)", - device->gdp->major, device->gdp->first_minor); + block->gdp->major, block->gdp->first_minor); else seq_printf(m, " at (???:??????)"); /* Print device name. */ - if (device->gdp) - seq_printf(m, " is %-8s", device->gdp->disk_name); + if (block->gdp) + seq_printf(m, " is %-8s", block->gdp->disk_name); else seq_printf(m, " is ????????"); /* Print devices features. */ @@ -100,14 +105,14 @@ dasd_devices_show(struct seq_file *m, void *v) case DASD_STATE_READY: case DASD_STATE_ONLINE: seq_printf(m, "active "); - if (dasd_check_blocksize(device->bp_block)) + if (dasd_check_blocksize(block->bp_block)) seq_printf(m, "n/f "); else seq_printf(m, "at blocksize: %d, %ld blocks, %ld MB", - device->bp_block, device->blocks, - ((device->bp_block >> 9) * - device->blocks) >> 11); + block->bp_block, block->blocks, + ((block->bp_block >> 9) * + block->blocks) >> 11); break; default: seq_printf(m, "no stat"); -- cgit v1.2.3-59-g8ed1b From 53360fb19672e9ca94d769694a18f46f6e0612a9 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Sat, 26 Jan 2008 14:11:24 +0100 Subject: [S390] Remove TOPDIR from Makefile This patch removes TOPDIR from arch/s390/kernel/Makefile. Cc: Sam Ravnborg Signed-off-by: WANG Cong Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/Makefile | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile index 56cb71007cd9..b3b650a93c7c 100644 --- a/arch/s390/kernel/Makefile +++ b/arch/s390/kernel/Makefile @@ -31,7 +31,3 @@ S390_KEXEC_OBJS := machine_kexec.o crash.o S390_KEXEC_OBJS += $(if $(CONFIG_64BIT),relocate_kernel64.o,relocate_kernel.o) obj-$(CONFIG_KEXEC) += $(S390_KEXEC_OBJS) -# -# This is just to get the dependencies... -# -binfmt_elf32.o: $(TOPDIR)/fs/binfmt_elf.c -- cgit v1.2.3-59-g8ed1b From 028fed8233b669e03def295a4e632b1b933720f9 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Sat, 26 Jan 2008 14:11:25 +0100 Subject: [S390] Unused field / extern declaration in processor.h Remove extern declaration of non-existent last_task_used_math and remove unused field error_code from the thread_struct. Signed-off-by: Martin Schwidefsky --- include/asm-s390/processor.h | 4 ---- 1 file changed, 4 deletions(-) diff --git a/include/asm-s390/processor.h b/include/asm-s390/processor.h index 21d40a19355e..c86b982aef5a 100644 --- a/include/asm-s390/processor.h +++ b/include/asm-s390/processor.h @@ -59,9 +59,6 @@ extern void s390_adjust_jiffies(void); extern void print_cpu_info(struct cpuinfo_S390 *); extern int get_cpu_capability(unsigned int *); -/* Lazy FPU handling on uni-processor */ -extern struct task_struct *last_task_used_math; - /* * User space process size: 2GB for 31 bit, 4TB for 64 bit. */ @@ -95,7 +92,6 @@ struct thread_struct { unsigned long ksp; /* kernel stack pointer */ mm_segment_t mm_segment; unsigned long prot_addr; /* address of protection-excep. */ - unsigned int error_code; /* error-code of last prog-excep. */ unsigned int trap_no; per_struct per_info; /* Used to give failing instruction back to user for ieee exceptions */ -- cgit v1.2.3-59-g8ed1b From 7dc1da9ffae5a344f7115d019e2be069d3e1bb8d Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Sat, 26 Jan 2008 14:11:26 +0100 Subject: [S390] dasd: fix loop in request expiration handling Add time to the 'expires' value to avoid a loop caused by the cqr termination function Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index db9193d38986..99268b964f67 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -1197,12 +1197,13 @@ static void __dasd_device_check_expire(struct dasd_device *device) (time_after_eq(jiffies, cqr->expires + cqr->starttime))) { if (device->discipline->term_IO(cqr) != 0) { /* Hmpf, try again in 5 sec */ - dasd_device_set_timer(device, 5*HZ); DEV_MESSAGE(KERN_ERR, device, "internal error - timeout (%is) expired " "for cqr %p, termination failed, " "retrying in 5s", (cqr->expires/HZ), cqr); + cqr->expires += 5*HZ; + dasd_device_set_timer(device, 5*HZ); } else { DEV_MESSAGE(KERN_ERR, device, "internal error - timeout (%is) expired " -- cgit v1.2.3-59-g8ed1b From dab5209cd878c146d9f6923f061d1c2725ff210f Mon Sep 17 00:00:00 2001 From: Carsten Otte Date: Sat, 26 Jan 2008 14:11:27 +0100 Subject: [S390] add smp_call_function_mask This patch adds the s390 variant for smp_call_function_mask(). The implementation is pretty straight forward using the wrapper __smp_call_function_map() which already takes a cpumask_t argument. Signed-off-by: Carsten Otte Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/smp.c | 27 +++++++++++++++++++++++++++ include/asm-s390/smp.h | 2 ++ 2 files changed, 29 insertions(+) diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 040406dbe9aa..f66db7185d85 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -210,6 +210,33 @@ int smp_call_function_single(int cpu, void (*func) (void *info), void *info, } EXPORT_SYMBOL(smp_call_function_single); +/** + * smp_call_function_mask(): Run a function on a set of other CPUs. + * @mask: The set of cpus to run on. Must not include the current cpu. + * @func: The function to run. This must be fast and non-blocking. + * @info: An arbitrary pointer to pass to the function. + * @wait: If true, wait (atomically) until function has completed on other CPUs. + * + * Returns 0 on success, else a negative status code. + * + * If @wait is true, then returns once @func has returned; otherwise + * it returns just before the target cpu calls @func. + * + * You must not call this function with disabled interrupts or from a + * hardware interrupt handler or from a bottom half handler. + */ +int +smp_call_function_mask(cpumask_t mask, + void (*func)(void *), void *info, + int wait) +{ + preempt_disable(); + __smp_call_function_map(func, info, 0, wait, mask); + preempt_enable(); + return 0; +} +EXPORT_SYMBOL(smp_call_function_mask); + void smp_send_stop(void) { int cpu, rc; diff --git a/include/asm-s390/smp.h b/include/asm-s390/smp.h index 218454b91862..c7b74326a527 100644 --- a/include/asm-s390/smp.h +++ b/include/asm-s390/smp.h @@ -90,6 +90,8 @@ extern void __cpu_die (unsigned int cpu); extern void cpu_die (void) __attribute__ ((noreturn)); extern int __cpu_up (unsigned int cpu); +extern int smp_call_function_mask(cpumask_t mask, void (*func)(void *), + void *info, int wait); #endif #ifndef CONFIG_SMP -- cgit v1.2.3-59-g8ed1b From 894cdde26b538c77b9943bc72f0570abf6e58e37 Mon Sep 17 00:00:00 2001 From: Hisashi Hifumi Date: Sat, 26 Jan 2008 14:11:28 +0100 Subject: [S390] do local_irq_restore while spinning in spin_lock_irqsave. In s390's spin_lock_irqsave, interrupts remain disabled while spinning. In other architectures like x86 and powerpc, interrupts are re-enabled while spinning if IRQ is not masked before spin_lock_irqsave is called. The following patch re-enables interrupts through local_irq_restore while spinning for a lock acquisition. This can improve system response. [heiko.carstens@de.ibm.com: removed saving of pc] Signed-off-by: Hisashi Hifumi Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/lib/spinlock.c | 23 +++++++++++++++++++++++ include/asm-s390/spinlock.h | 13 ++++++++++++- 2 files changed, 35 insertions(+), 1 deletion(-) diff --git a/arch/s390/lib/spinlock.c b/arch/s390/lib/spinlock.c index 59c56c3d72d0..e41f4008afc5 100644 --- a/arch/s390/lib/spinlock.c +++ b/arch/s390/lib/spinlock.c @@ -59,6 +59,29 @@ void _raw_spin_lock_wait(raw_spinlock_t *lp) } EXPORT_SYMBOL(_raw_spin_lock_wait); +void _raw_spin_lock_wait_flags(raw_spinlock_t *lp, unsigned long flags) +{ + int count = spin_retry; + unsigned int cpu = ~smp_processor_id(); + + local_irq_restore(flags); + while (1) { + if (count-- <= 0) { + unsigned int owner = lp->owner_cpu; + if (owner != 0) + _raw_yield_cpu(~owner); + count = spin_retry; + } + if (__raw_spin_is_locked(lp)) + continue; + local_irq_disable(); + if (_raw_compare_and_swap(&lp->owner_cpu, 0, cpu) == 0) + return; + local_irq_restore(flags); + } +} +EXPORT_SYMBOL(_raw_spin_lock_wait_flags); + int _raw_spin_trylock_retry(raw_spinlock_t *lp) { unsigned int cpu = ~smp_processor_id(); diff --git a/include/asm-s390/spinlock.h b/include/asm-s390/spinlock.h index c1d6e7e304e2..df84ae96915f 100644 --- a/include/asm-s390/spinlock.h +++ b/include/asm-s390/spinlock.h @@ -53,12 +53,12 @@ _raw_compare_and_swap(volatile unsigned int *lock, */ #define __raw_spin_is_locked(x) ((x)->owner_cpu != 0) -#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) #define __raw_spin_unlock_wait(lock) \ do { while (__raw_spin_is_locked(lock)) \ _raw_spin_relax(lock); } while (0) extern void _raw_spin_lock_wait(raw_spinlock_t *); +extern void _raw_spin_lock_wait_flags(raw_spinlock_t *, unsigned long flags); extern int _raw_spin_trylock_retry(raw_spinlock_t *); extern void _raw_spin_relax(raw_spinlock_t *lock); @@ -72,6 +72,17 @@ static inline void __raw_spin_lock(raw_spinlock_t *lp) _raw_spin_lock_wait(lp); } +static inline void __raw_spin_lock_flags(raw_spinlock_t *lp, + unsigned long flags) +{ + int old; + + old = _raw_compare_and_swap(&lp->owner_cpu, 0, ~smp_processor_id()); + if (likely(old == 0)) + return; + _raw_spin_lock_wait_flags(lp, flags); +} + static inline int __raw_spin_trylock(raw_spinlock_t *lp) { int old; -- cgit v1.2.3-59-g8ed1b From 5c81cdbeff72e7fc2eb62ee5dc26197e54f9a06c Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Sat, 26 Jan 2008 14:11:29 +0100 Subject: [S390] constify function pointer tables. Signed-off-by: Jan Engelhardt Signed-off-by: Martin Schwidefsky --- arch/s390/crypto/prng.c | 2 +- arch/s390/kernel/setup.c | 2 +- drivers/s390/block/dasd_proc.c | 2 +- drivers/s390/char/tape_proc.c | 2 +- drivers/s390/char/vmur.c | 2 +- drivers/s390/char/zcore.c | 2 +- drivers/s390/cio/blacklist.c | 2 +- drivers/s390/net/qeth_proc.c | 4 ++-- 8 files changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/s390/crypto/prng.c b/arch/s390/crypto/prng.c index 23ed094c52fe..0cfefddd8375 100644 --- a/arch/s390/crypto/prng.c +++ b/arch/s390/crypto/prng.c @@ -146,7 +146,7 @@ static ssize_t prng_read(struct file *file, char __user *ubuf, size_t nbytes, return ret; } -static struct file_operations prng_fops = { +static const struct file_operations prng_fops = { .owner = THIS_MODULE, .open = &prng_open, .release = NULL, diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index fcebf645618a..766c783bd7a7 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -917,7 +917,7 @@ static void *c_next(struct seq_file *m, void *v, loff_t *pos) static void c_stop(struct seq_file *m, void *v) { } -struct seq_operations cpuinfo_op = { +const struct seq_operations cpuinfo_op = { .start = c_start, .next = c_next, .stop = c_stop, diff --git a/drivers/s390/block/dasd_proc.c b/drivers/s390/block/dasd_proc.c index 0584a7dc5ede..28a86f070048 100644 --- a/drivers/s390/block/dasd_proc.c +++ b/drivers/s390/block/dasd_proc.c @@ -142,7 +142,7 @@ static void dasd_devices_stop(struct seq_file *m, void *v) { } -static struct seq_operations dasd_devices_seq_ops = { +static const struct seq_operations dasd_devices_seq_ops = { .start = dasd_devices_start, .next = dasd_devices_next, .stop = dasd_devices_stop, diff --git a/drivers/s390/char/tape_proc.c b/drivers/s390/char/tape_proc.c index cea49f001f89..c9b96d51b28f 100644 --- a/drivers/s390/char/tape_proc.c +++ b/drivers/s390/char/tape_proc.c @@ -97,7 +97,7 @@ static void tape_proc_stop(struct seq_file *m, void *v) { } -static struct seq_operations tape_proc_seq = { +static const struct seq_operations tape_proc_seq = { .start = tape_proc_start, .next = tape_proc_next, .stop = tape_proc_stop, diff --git a/drivers/s390/char/vmur.c b/drivers/s390/char/vmur.c index d70a6e65bf14..7689b500a104 100644 --- a/drivers/s390/char/vmur.c +++ b/drivers/s390/char/vmur.c @@ -759,7 +759,7 @@ static loff_t ur_llseek(struct file *file, loff_t offset, int whence) return newpos; } -static struct file_operations ur_fops = { +static const struct file_operations ur_fops = { .owner = THIS_MODULE, .open = ur_open, .release = ur_release, diff --git a/drivers/s390/char/zcore.c b/drivers/s390/char/zcore.c index 7073daf77981..f523501e6e6c 100644 --- a/drivers/s390/char/zcore.c +++ b/drivers/s390/char/zcore.c @@ -470,7 +470,7 @@ static loff_t zcore_lseek(struct file *file, loff_t offset, int orig) return rc; } -static struct file_operations zcore_fops = { +static const struct file_operations zcore_fops = { .owner = THIS_MODULE, .llseek = zcore_lseek, .read = zcore_read, diff --git a/drivers/s390/cio/blacklist.c b/drivers/s390/cio/blacklist.c index bd5f16f80bf8..e8597ec92247 100644 --- a/drivers/s390/cio/blacklist.c +++ b/drivers/s390/cio/blacklist.c @@ -348,7 +348,7 @@ cio_ignore_write(struct file *file, const char __user *user_buf, return user_len; } -static struct seq_operations cio_ignore_proc_seq_ops = { +static const struct seq_operations cio_ignore_proc_seq_ops = { .start = cio_ignore_proc_seq_start, .stop = cio_ignore_proc_seq_stop, .next = cio_ignore_proc_seq_next, diff --git a/drivers/s390/net/qeth_proc.c b/drivers/s390/net/qeth_proc.c index f1ff165a5e05..46ecd03a597e 100644 --- a/drivers/s390/net/qeth_proc.c +++ b/drivers/s390/net/qeth_proc.c @@ -146,7 +146,7 @@ qeth_procfile_seq_show(struct seq_file *s, void *it) return 0; } -static struct seq_operations qeth_procfile_seq_ops = { +static const struct seq_operations qeth_procfile_seq_ops = { .start = qeth_procfile_seq_start, .stop = qeth_procfile_seq_stop, .next = qeth_procfile_seq_next, @@ -264,7 +264,7 @@ qeth_perf_procfile_seq_show(struct seq_file *s, void *it) return 0; } -static struct seq_operations qeth_perf_procfile_seq_ops = { +static const struct seq_operations qeth_perf_procfile_seq_ops = { .start = qeth_procfile_seq_start, .stop = qeth_procfile_seq_stop, .next = qeth_procfile_seq_next, -- cgit v1.2.3-59-g8ed1b From 361f494d4e62ee5f7a971bf34945deeb69392159 Mon Sep 17 00:00:00 2001 From: Peter Tiedemann Date: Sat, 26 Jan 2008 14:11:30 +0100 Subject: [S390] usage of s390dbf: shrink number of debug areas to use. Signed-off-by: Peter Tiedemann --- drivers/s390/block/dasd.c | 4 ++-- drivers/s390/cio/cio.c | 6 +++--- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 99268b964f67..1db15f3e5d20 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -214,7 +214,7 @@ static int dasd_state_known_to_basic(struct dasd_device *device) return rc; } /* register 'device' debug area, used for all DBF_DEV_XXX calls */ - device->debug_area = debug_register(device->cdev->dev.bus_id, 1, 2, + device->debug_area = debug_register(device->cdev->dev.bus_id, 1, 1, 8 * sizeof(long)); debug_register_view(device->debug_area, &debug_sprintf_view); debug_set_level(device->debug_area, DBF_WARNING); @@ -2435,7 +2435,7 @@ static int __init dasd_init(void) init_waitqueue_head(&dasd_flush_wq); /* register 'common' DASD debug area, used for all DBF_XXX calls */ - dasd_debug_area = debug_register("dasd", 1, 2, 8 * sizeof(long)); + dasd_debug_area = debug_register("dasd", 1, 1, 8 * sizeof(long)); if (dasd_debug_area == NULL) { rc = -ENOMEM; goto failed; diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c index 11f632f9db58..60590a12d529 100644 --- a/drivers/s390/cio/cio.c +++ b/drivers/s390/cio/cio.c @@ -64,17 +64,17 @@ __setup ("cio_msg=", cio_setup); */ static int __init cio_debug_init(void) { - cio_debug_msg_id = debug_register("cio_msg", 16, 4, 16 * sizeof(long)); + cio_debug_msg_id = debug_register("cio_msg", 16, 1, 16 * sizeof(long)); if (!cio_debug_msg_id) goto out_unregister; debug_register_view(cio_debug_msg_id, &debug_sprintf_view); debug_set_level(cio_debug_msg_id, 2); - cio_debug_trace_id = debug_register("cio_trace", 16, 4, 16); + cio_debug_trace_id = debug_register("cio_trace", 16, 1, 16); if (!cio_debug_trace_id) goto out_unregister; debug_register_view(cio_debug_trace_id, &debug_hex_ascii_view); debug_set_level(cio_debug_trace_id, 2); - cio_debug_crw_id = debug_register("cio_crw", 16, 4, 16 * sizeof(long)); + cio_debug_crw_id = debug_register("cio_crw", 16, 1, 16 * sizeof(long)); if (!cio_debug_crw_id) goto out_unregister; debug_register_view(cio_debug_crw_id, &debug_sprintf_view); -- cgit v1.2.3-59-g8ed1b From 9d40d2e3955185b69c264583d080eb3defcb05a0 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Sat, 26 Jan 2008 14:11:31 +0100 Subject: [S390] replace lock_cpu_hotplug with get_online_cpus Git commit 86ef5c9a8edd78e6bf92879f32329d89b2d55b5a forgot a few lock_cpu_hotplug/unlock_cpu_hotplug pairs in arch/s390/kernel/smp.c Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/smp.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index f66db7185d85..aa37fa154512 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -568,9 +568,9 @@ static void __init smp_detect_cpus(void) out: kfree(info); printk(KERN_INFO "CPUs: %d configured, %d standby\n", c_cpus, s_cpus); - lock_cpu_hotplug(); + get_online_cpus(); smp_rescan_cpus(); - unlock_cpu_hotplug(); + put_online_cpus(); } /* @@ -872,7 +872,7 @@ static ssize_t cpu_configure_store(struct sys_device *dev, const char *buf, return -EINVAL; mutex_lock(&smp_cpu_state_mutex); - lock_cpu_hotplug(); + get_online_cpus(); rc = -EBUSY; if (cpu_online(cpu)) goto out; @@ -896,7 +896,7 @@ static ssize_t cpu_configure_store(struct sys_device *dev, const char *buf, break; } out: - unlock_cpu_hotplug(); + put_online_cpus(); mutex_unlock(&smp_cpu_state_mutex); return rc ? rc : count; } @@ -1044,7 +1044,7 @@ static ssize_t rescan_store(struct sys_device *dev, const char *buf, int rc; mutex_lock(&smp_cpu_state_mutex); - lock_cpu_hotplug(); + get_online_cpus(); newcpus = cpu_present_map; rc = smp_rescan_cpus(); if (rc) @@ -1057,7 +1057,7 @@ static ssize_t rescan_store(struct sys_device *dev, const char *buf, } rc = 0; out: - unlock_cpu_hotplug(); + put_online_cpus(); mutex_unlock(&smp_cpu_state_mutex); return rc ? rc : count; } -- cgit v1.2.3-59-g8ed1b From 4e9f9fd5148004b983b29e15de66918e71da56c0 Mon Sep 17 00:00:00 2001 From: Herbert Valerio Riedel Date: Mon, 26 Nov 2007 18:41:02 +0100 Subject: [ARM] 4668/1: ep93xx: implement new GPIO API Implement new GPIO API for ep93xx platform as defined in Documentation/gpio.txt and provide transitional __deprecated wrappers for the previous gpio_line_* functions. Signed-off-by: Herbert Valerio Riedel Acked-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/Kconfig | 1 + arch/arm/mach-ep93xx/core.c | 63 +++++++++++++++++++++---------- include/asm-arm/arch-ep93xx/gpio.h | 76 +++++++++++++++++++++++++++++++++----- 3 files changed, 111 insertions(+), 29 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a04f507e7f2c..97e58a1863c2 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -217,6 +217,7 @@ config ARCH_EP93XX bool "EP93xx-based" select ARM_AMBA select ARM_VIC + select GENERIC_GPIO help This enables support for the Cirrus EP93xx series of CPUs. diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 70b2c7801110..8a7340661377 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -188,7 +188,7 @@ static unsigned char data_direction_register_offset[8] = { 0x10, 0x14, 0x18, 0x1c, 0x24, 0x34, 0x3c, 0x44, }; -void gpio_line_config(int line, int direction) +static void ep93xx_gpio_set_direction(unsigned line, int direction) { unsigned int data_direction_register; unsigned long flags; @@ -219,39 +219,64 @@ void gpio_line_config(int line, int direction) } local_irq_restore(flags); } + +void __deprecated gpio_line_config(int line, int direction) +{ + ep93xx_gpio_set_direction(line, direction); +} EXPORT_SYMBOL(gpio_line_config); -int gpio_line_get(int line) +int gpio_direction_input(unsigned gpio) +{ + if (gpio > EP93XX_GPIO_LINE_H(7)) + return -EINVAL; + + ep93xx_gpio_set_direction(gpio, GPIO_IN); + + return 0; +} +EXPORT_SYMBOL(gpio_direction_input); + +int gpio_direction_output(unsigned gpio, int value) +{ + if (gpio > EP93XX_GPIO_LINE_H(7)) + return -EINVAL; + + gpio_set_value(gpio, value); + ep93xx_gpio_set_direction(gpio, GPIO_OUT); + + return 0; +} +EXPORT_SYMBOL(gpio_direction_output); + +int gpio_get_value(unsigned gpio) { unsigned int data_register; - data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]); + data_register = EP93XX_GPIO_REG(data_register_offset[gpio >> 3]); - return !!(__raw_readb(data_register) & (1 << (line & 7))); + return !!(__raw_readb(data_register) & (1 << (gpio & 7))); } -EXPORT_SYMBOL(gpio_line_get); +EXPORT_SYMBOL(gpio_get_value); -void gpio_line_set(int line, int value) +void gpio_set_value(unsigned gpio, int value) { unsigned int data_register; unsigned long flags; unsigned char v; - data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]); + data_register = EP93XX_GPIO_REG(data_register_offset[gpio >> 3]); local_irq_save(flags); - if (value == EP93XX_GPIO_HIGH) { - v = __raw_readb(data_register); - v |= 1 << (line & 7); - __raw_writeb(v, data_register); - } else if (value == EP93XX_GPIO_LOW) { - v = __raw_readb(data_register); - v &= ~(1 << (line & 7)); - __raw_writeb(v, data_register); - } + v = __raw_readb(data_register); + if (value) + v |= 1 << (gpio & 7); + else + v &= ~(1 << (gpio & 7)); + __raw_writeb(v, data_register); local_irq_restore(flags); } -EXPORT_SYMBOL(gpio_line_set); +EXPORT_SYMBOL(gpio_set_value); /************************************************************************* @@ -334,9 +359,9 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type) line = irq - IRQ_EP93XX_GPIO(0); if (line >= 0 && line < 16) { - gpio_line_config(line, GPIO_IN); + ep93xx_gpio_set_direction(line, GPIO_IN); } else { - gpio_line_config(EP93XX_GPIO_LINE_F(line-16), GPIO_IN); + ep93xx_gpio_set_direction(EP93XX_GPIO_LINE_F(line-16), GPIO_IN); } port = line >> 3; diff --git a/include/asm-arm/arch-ep93xx/gpio.h b/include/asm-arm/arch-ep93xx/gpio.h index 1ee14a14cba0..fc1e57db5fac 100644 --- a/include/asm-arm/arch-ep93xx/gpio.h +++ b/include/asm-arm/arch-ep93xx/gpio.h @@ -5,16 +5,6 @@ #ifndef __ASM_ARCH_GPIO_H #define __ASM_ARCH_GPIO_H -#define GPIO_IN 0 -#define GPIO_OUT 1 - -#define EP93XX_GPIO_LOW 0 -#define EP93XX_GPIO_HIGH 1 - -extern void gpio_line_config(int line, int direction); -extern int gpio_line_get(int line); -extern void gpio_line_set(int line, int value); - /* GPIO port A. */ #define EP93XX_GPIO_LINE_A(x) ((x) + 0) #define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0) @@ -103,5 +93,71 @@ extern void gpio_line_set(int line, int value); #define EP93XX_GPIO_LINE_DD6 EP93XX_GPIO_LINE_H(6) #define EP93XX_GPIO_LINE_DD7 EP93XX_GPIO_LINE_H(7) +/* new generic GPIO API - see Documentation/gpio.txt */ + +static inline int gpio_request(unsigned gpio, const char *label) +{ + if (gpio > EP93XX_GPIO_LINE_H(7)) + return -EINVAL; + return 0; +} + +static inline void gpio_free(unsigned gpio) +{ +} + +int gpio_direction_input(unsigned gpio); +int gpio_direction_output(unsigned gpio, int value); +int gpio_get_value(unsigned gpio); +void gpio_set_value(unsigned gpio, int value); + +#include /* cansleep wrappers */ + +/* + * Map GPIO A0..A7 (0..7) to irq 64..71, + * B0..B7 (7..15) to irq 72..79, and + * F0..F7 (40..47) to irq 80..87. + */ + +static inline int gpio_to_irq(unsigned gpio) +{ + if (gpio <= EP93XX_GPIO_LINE_EGPIO15) + return 64 + gpio; + + if (gpio >= EP93XX_GPIO_LINE_F(0) && gpio <= EP93XX_GPIO_LINE_F(7)) + return 80 + (gpio - EP93XX_GPIO_LINE_F(0)); + + return -EINVAL; +} + +static inline int irq_to_gpio(unsigned irq) +{ + if (irq >= 64 && irq <= 79) + return irq - 64; + + if (irq >= 80 && irq <= 87) + return (irq - 80) + EP93XX_GPIO_LINE_F(0); + + return -EINVAL; +} + +/* obsolete specific GPIO API */ +#define GPIO_IN 0 +#define GPIO_OUT 1 + +#define EP93XX_GPIO_LOW 0 +#define EP93XX_GPIO_HIGH 1 + +void __deprecated gpio_line_config(int line, int direction); + +static inline int __deprecated gpio_line_get(int line) +{ + return gpio_get_value(line); +} + +static inline void __deprecated gpio_line_set(int line, int value) +{ + gpio_set_value(line, value); +} #endif -- cgit v1.2.3-59-g8ed1b From 7ca722533979d47563e75a40c86c405153818b83 Mon Sep 17 00:00:00 2001 From: Herbert Valerio Riedel Date: Mon, 26 Nov 2007 18:45:59 +0100 Subject: [ARM] 4669/1: ep93xx: simplify GPIO code and cleanups This patch renumbers the (virtual) GPIO line numbering to have all irq-capable gpio lines <= EP93XX_GPIO_LINE_MAX_IRQ by swapping the port f range with the port c range; This simplifies code such as #define IRQ_EP93XX_GPIO(x) (64 + (((x) + (((x) >> 2) & 8)) & 0x1f)) or if (line >= 0 && line < 16) { /* Port A/B */ } else if (line >= 40 && line < 48) { /* Port F */ } considerably; in addition to the renumbering this patch also introduces macro constants EP93XX_GPIO_LINE_MAX_IRQ and EP93XX_GPIO_LINE_MAX, and replaces most magic numbers by those and invocations of gpio_to_irq()/irq_to_gpio(). Signed-off-by: Herbert Valerio Riedel Acked-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/mach-ep93xx/core.c | 147 ++++++++++++++++++------------------- include/asm-arm/arch-ep93xx/gpio.h | 27 +++---- include/asm-arm/arch-ep93xx/irqs.h | 6 -- 3 files changed, 82 insertions(+), 98 deletions(-) diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 8a7340661377..58957d7a5763 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -157,35 +157,35 @@ static unsigned char gpio_int_enabled[3]; static unsigned char gpio_int_type1[3]; static unsigned char gpio_int_type2[3]; -static void update_gpio_int_params(int abf) +/* Port ordering is: A B F */ +static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c }; +static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 }; +static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 }; +static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x5c }; + +static void update_gpio_int_params(unsigned port) { - if (abf == 0) { - __raw_writeb(0, EP93XX_GPIO_A_INT_ENABLE); - __raw_writeb(gpio_int_type2[0], EP93XX_GPIO_A_INT_TYPE2); - __raw_writeb(gpio_int_type1[0], EP93XX_GPIO_A_INT_TYPE1); - __raw_writeb(gpio_int_unmasked[0] & gpio_int_enabled[0], EP93XX_GPIO_A_INT_ENABLE); - } else if (abf == 1) { - __raw_writeb(0, EP93XX_GPIO_B_INT_ENABLE); - __raw_writeb(gpio_int_type2[1], EP93XX_GPIO_B_INT_TYPE2); - __raw_writeb(gpio_int_type1[1], EP93XX_GPIO_B_INT_TYPE1); - __raw_writeb(gpio_int_unmasked[1] & gpio_int_enabled[1], EP93XX_GPIO_B_INT_ENABLE); - } else if (abf == 2) { - __raw_writeb(0, EP93XX_GPIO_F_INT_ENABLE); - __raw_writeb(gpio_int_type2[2], EP93XX_GPIO_F_INT_TYPE2); - __raw_writeb(gpio_int_type1[2], EP93XX_GPIO_F_INT_TYPE1); - __raw_writeb(gpio_int_unmasked[2] & gpio_int_enabled[2], EP93XX_GPIO_F_INT_ENABLE); - } else { - BUG(); - } -} + BUG_ON(port > 2); + __raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port])); + + __raw_writeb(gpio_int_type2[port], + EP93XX_GPIO_REG(int_type2_register_offset[port])); + + __raw_writeb(gpio_int_type1[port], + EP93XX_GPIO_REG(int_type1_register_offset[port])); + + __raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port], + EP93XX_GPIO_REG(int_en_register_offset[port])); +} -static unsigned char data_register_offset[8] = { - 0x00, 0x04, 0x08, 0x0c, 0x20, 0x30, 0x38, 0x40, +/* Port ordering is: A B F D E C G H */ +static const u8 data_register_offset[8] = { + 0x00, 0x04, 0x30, 0x0c, 0x20, 0x08, 0x38, 0x40, }; -static unsigned char data_direction_register_offset[8] = { - 0x10, 0x14, 0x18, 0x1c, 0x24, 0x34, 0x3c, 0x44, +static const u8 data_direction_register_offset[8] = { + 0x10, 0x14, 0x34, 0x1c, 0x24, 0x18, 0x3c, 0x44, }; static void ep93xx_gpio_set_direction(unsigned line, int direction) @@ -199,14 +199,10 @@ static void ep93xx_gpio_set_direction(unsigned line, int direction) local_irq_save(flags); if (direction == GPIO_OUT) { - if (line >= 0 && line < 16) { - /* Port A/B. */ + if (line >= 0 && line <= EP93XX_GPIO_LINE_MAX_IRQ) { + /* Port A/B/F */ gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7)); update_gpio_int_params(line >> 3); - } else if (line >= 40 && line < 48) { - /* Port F. */ - gpio_int_unmasked[2] &= ~(1 << (line & 7)); - update_gpio_int_params(2); } v = __raw_readb(data_direction_register); @@ -228,7 +224,7 @@ EXPORT_SYMBOL(gpio_line_config); int gpio_direction_input(unsigned gpio) { - if (gpio > EP93XX_GPIO_LINE_H(7)) + if (gpio > EP93XX_GPIO_LINE_MAX) return -EINVAL; ep93xx_gpio_set_direction(gpio, GPIO_IN); @@ -239,7 +235,7 @@ EXPORT_SYMBOL(gpio_direction_input); int gpio_direction_output(unsigned gpio, int value) { - if (gpio > EP93XX_GPIO_LINE_H(7)) + if (gpio > EP93XX_GPIO_LINE_MAX) return -EINVAL; gpio_set_value(gpio, value); @@ -290,47 +286,50 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc) status = __raw_readb(EP93XX_GPIO_A_INT_STATUS); for (i = 0; i < 8; i++) { if (status & (1 << i)) { - desc = irq_desc + IRQ_EP93XX_GPIO(0) + i; - desc_handle_irq(IRQ_EP93XX_GPIO(0) + i, desc); + int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i; + desc = irq_desc + gpio_irq; + desc_handle_irq(gpio_irq, desc); } } status = __raw_readb(EP93XX_GPIO_B_INT_STATUS); for (i = 0; i < 8; i++) { if (status & (1 << i)) { - desc = irq_desc + IRQ_EP93XX_GPIO(8) + i; - desc_handle_irq(IRQ_EP93XX_GPIO(8) + i, desc); + int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i; + desc = irq_desc + gpio_irq; + desc_handle_irq(gpio_irq, desc); } } } static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc) { - int gpio_irq = IRQ_EP93XX_GPIO(16) + (((irq + 1) & 7) ^ 4); + /* + * map discontiguous hw irq range to continous sw irq range: + * + * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7}) + */ + int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */ + int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx; desc_handle_irq(gpio_irq, irq_desc + gpio_irq); } static void ep93xx_gpio_irq_mask_ack(unsigned int irq) { - int line = irq - IRQ_EP93XX_GPIO(0); + int line = irq_to_gpio(irq); int port = line >> 3; + int port_mask = 1 << (line & 7); - gpio_int_unmasked[port] &= ~(1 << (line & 7)); + gpio_int_unmasked[port] &= ~port_mask; update_gpio_int_params(port); - if (port == 0) { - __raw_writel(1 << (line & 7), EP93XX_GPIO_A_INT_ACK); - } else if (port == 1) { - __raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK); - } else if (port == 2) { - __raw_writel(1 << (line & 7), EP93XX_GPIO_F_INT_ACK); - } + __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); } static void ep93xx_gpio_irq_mask(unsigned int irq) { - int line = irq - IRQ_EP93XX_GPIO(0); + int line = irq_to_gpio(irq); int port = line >> 3; gpio_int_unmasked[port] &= ~(1 << (line & 7)); @@ -339,7 +338,7 @@ static void ep93xx_gpio_irq_mask(unsigned int irq) static void ep93xx_gpio_irq_unmask(unsigned int irq) { - int line = irq - IRQ_EP93XX_GPIO(0); + int line = irq_to_gpio(irq); int port = line >> 3; gpio_int_unmasked[port] |= 1 << (line & 7); @@ -354,37 +353,30 @@ static void ep93xx_gpio_irq_unmask(unsigned int irq) */ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type) { - int port; - int line; + const int gpio = irq_to_gpio(irq); + const int port = gpio >> 3; + const int port_mask = 1 << (gpio & 7); - line = irq - IRQ_EP93XX_GPIO(0); - if (line >= 0 && line < 16) { - ep93xx_gpio_set_direction(line, GPIO_IN); - } else { - ep93xx_gpio_set_direction(EP93XX_GPIO_LINE_F(line-16), GPIO_IN); - } - - port = line >> 3; - line &= 7; + ep93xx_gpio_set_direction(gpio, GPIO_IN); if (type & IRQT_RISING) { - gpio_int_enabled[port] |= 1 << line; - gpio_int_type1[port] |= 1 << line; - gpio_int_type2[port] |= 1 << line; + gpio_int_enabled[port] |= port_mask; + gpio_int_type1[port] |= port_mask; + gpio_int_type2[port] |= port_mask; } else if (type & IRQT_FALLING) { - gpio_int_enabled[port] |= 1 << line; - gpio_int_type1[port] |= 1 << line; - gpio_int_type2[port] &= ~(1 << line); + gpio_int_enabled[port] |= port_mask; + gpio_int_type1[port] |= port_mask; + gpio_int_type2[port] &= ~port_mask; } else if (type & IRQT_HIGH) { - gpio_int_enabled[port] |= 1 << line; - gpio_int_type1[port] &= ~(1 << line); - gpio_int_type2[port] |= 1 << line; + gpio_int_enabled[port] |= port_mask; + gpio_int_type1[port] &= ~port_mask; + gpio_int_type2[port] |= port_mask; } else if (type & IRQT_LOW) { - gpio_int_enabled[port] |= 1 << line; - gpio_int_type1[port] &= ~(1 << line); - gpio_int_type2[port] &= ~(1 << line); + gpio_int_enabled[port] |= port_mask; + gpio_int_type1[port] &= ~port_mask; + gpio_int_type2[port] &= ~port_mask; } else { - gpio_int_enabled[port] &= ~(1 << line); + gpio_int_enabled[port] &= ~port_mask; } update_gpio_int_params(port); @@ -402,15 +394,16 @@ static struct irq_chip ep93xx_gpio_irq_chip = { void __init ep93xx_init_irq(void) { - int irq; + int gpio_irq; vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK); vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK); - for (irq = IRQ_EP93XX_GPIO(0); irq <= IRQ_EP93XX_GPIO(23); irq++) { - set_irq_chip(irq, &ep93xx_gpio_irq_chip); - set_irq_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID); + for (gpio_irq = gpio_to_irq(0); + gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) { + set_irq_chip(gpio_irq, &ep93xx_gpio_irq_chip); + set_irq_handler(gpio_irq, handle_level_irq); + set_irq_flags(gpio_irq, IRQF_VALID); } set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler); diff --git a/include/asm-arm/arch-ep93xx/gpio.h b/include/asm-arm/arch-ep93xx/gpio.h index fc1e57db5fac..cebb64be7e4b 100644 --- a/include/asm-arm/arch-ep93xx/gpio.h +++ b/include/asm-arm/arch-ep93xx/gpio.h @@ -28,7 +28,7 @@ #define EP93XX_GPIO_LINE_EGPIO15 EP93XX_GPIO_LINE_B(7) /* GPIO port C. */ -#define EP93XX_GPIO_LINE_C(x) ((x) + 16) +#define EP93XX_GPIO_LINE_C(x) ((x) + 40) #define EP93XX_GPIO_LINE_ROW0 EP93XX_GPIO_LINE_C(0) #define EP93XX_GPIO_LINE_ROW1 EP93XX_GPIO_LINE_C(1) #define EP93XX_GPIO_LINE_ROW2 EP93XX_GPIO_LINE_C(2) @@ -61,7 +61,7 @@ #define EP93XX_GPIO_LINE_IDEDA2 EP93XX_GPIO_LINE_E(7) /* GPIO port F. */ -#define EP93XX_GPIO_LINE_F(x) ((x) + 40) +#define EP93XX_GPIO_LINE_F(x) ((x) + 16) #define EP93XX_GPIO_LINE_WP EP93XX_GPIO_LINE_F(0) #define EP93XX_GPIO_LINE_MCCD1 EP93XX_GPIO_LINE_F(1) #define EP93XX_GPIO_LINE_MCCD2 EP93XX_GPIO_LINE_F(2) @@ -93,11 +93,17 @@ #define EP93XX_GPIO_LINE_DD6 EP93XX_GPIO_LINE_H(6) #define EP93XX_GPIO_LINE_DD7 EP93XX_GPIO_LINE_H(7) +/* maximum value for gpio line identifiers */ +#define EP93XX_GPIO_LINE_MAX EP93XX_GPIO_LINE_H(7) + +/* maximum value for irq capable line identifiers */ +#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7) + /* new generic GPIO API - see Documentation/gpio.txt */ static inline int gpio_request(unsigned gpio, const char *label) { - if (gpio > EP93XX_GPIO_LINE_H(7)) + if (gpio > EP93XX_GPIO_LINE_MAX) return -EINVAL; return 0; } @@ -116,29 +122,20 @@ void gpio_set_value(unsigned gpio, int value); /* * Map GPIO A0..A7 (0..7) to irq 64..71, * B0..B7 (7..15) to irq 72..79, and - * F0..F7 (40..47) to irq 80..87. + * F0..F7 (16..24) to irq 80..87. */ static inline int gpio_to_irq(unsigned gpio) { - if (gpio <= EP93XX_GPIO_LINE_EGPIO15) + if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ) return 64 + gpio; - if (gpio >= EP93XX_GPIO_LINE_F(0) && gpio <= EP93XX_GPIO_LINE_F(7)) - return 80 + (gpio - EP93XX_GPIO_LINE_F(0)); - return -EINVAL; } static inline int irq_to_gpio(unsigned irq) { - if (irq >= 64 && irq <= 79) - return irq - 64; - - if (irq >= 80 && irq <= 87) - return (irq - 80) + EP93XX_GPIO_LINE_F(0); - - return -EINVAL; + return irq - gpio_to_irq(0); } /* obsolete specific GPIO API */ diff --git a/include/asm-arm/arch-ep93xx/irqs.h b/include/asm-arm/arch-ep93xx/irqs.h index 2a8c63638c5e..53d4a68bfc88 100644 --- a/include/asm-arm/arch-ep93xx/irqs.h +++ b/include/asm-arm/arch-ep93xx/irqs.h @@ -67,12 +67,6 @@ #define IRQ_EP93XX_SAI 60 #define EP93XX_VIC2_VALID_IRQ_MASK 0x1fffffff -/* - * Map GPIO A0..A7 to irq 64..71, B0..B7 to 72..79, and - * F0..F7 to 80..87. - */ -#define IRQ_EP93XX_GPIO(x) (64 + (((x) + (((x) >> 2) & 8)) & 0x1f)) - #define NR_EP93XX_IRQS (64 + 24) #define EP93XX_BOARD_IRQ(x) (NR_EP93XX_IRQS + (x)) -- cgit v1.2.3-59-g8ed1b From 3c9a071d77e007464952a2d41b6686d98eb3f0b8 Mon Sep 17 00:00:00 2001 From: Herbert Valerio Riedel Date: Mon, 26 Nov 2007 18:49:08 +0100 Subject: [ARM] 4670/1: ep93xx: implement IRQT_BOTHEDGE gpio irq sense type Having a both-edge sensitive irq trigger type is required for the generic gpio-keys input driver; alas the ep93xx does not support both-edge gpio triggers in hardware, so this patch implements them by switching edge polarity on each triggered interrupt. This is the same approach as taken by the Orion SoC both-edge gpio irq support implementation. Signed-off-by: Herbert Valerio Riedel Acked-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/mach-ep93xx/core.c | 64 +++++++++++++++++++++++++++++++++++++-------- 1 file changed, 53 insertions(+), 11 deletions(-) diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 58957d7a5763..2788da06417c 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -3,6 +3,7 @@ * Core routines for Cirrus EP93xx chips. * * Copyright (C) 2006 Lennert Buytenhek + * Copyright (C) 2007 Herbert Valerio Riedel * * Thanks go to Michael Burian and Ray Lehtiniemi for their key * role in the ep93xx linux community. @@ -315,12 +316,29 @@ static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc) desc_handle_irq(gpio_irq, irq_desc + gpio_irq); } +static void ep93xx_gpio_irq_ack(unsigned int irq) +{ + int line = irq_to_gpio(irq); + int port = line >> 3; + int port_mask = 1 << (line & 7); + + if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) { + gpio_int_type2[port] ^= port_mask; /* switch edge direction */ + update_gpio_int_params(port); + } + + __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); +} + static void ep93xx_gpio_irq_mask_ack(unsigned int irq) { int line = irq_to_gpio(irq); int port = line >> 3; int port_mask = 1 << (line & 7); + if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) + gpio_int_type2[port] ^= port_mask; /* switch edge direction */ + gpio_int_unmasked[port] &= ~port_mask; update_gpio_int_params(port); @@ -353,31 +371,54 @@ static void ep93xx_gpio_irq_unmask(unsigned int irq) */ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type) { + struct irq_desc *desc = irq_desc + irq; const int gpio = irq_to_gpio(irq); const int port = gpio >> 3; const int port_mask = 1 << (gpio & 7); ep93xx_gpio_set_direction(gpio, GPIO_IN); - if (type & IRQT_RISING) { - gpio_int_enabled[port] |= port_mask; + switch (type) { + case IRQT_RISING: gpio_int_type1[port] |= port_mask; gpio_int_type2[port] |= port_mask; - } else if (type & IRQT_FALLING) { - gpio_int_enabled[port] |= port_mask; + desc->handle_irq = handle_edge_irq; + break; + case IRQT_FALLING: gpio_int_type1[port] |= port_mask; gpio_int_type2[port] &= ~port_mask; - } else if (type & IRQT_HIGH) { - gpio_int_enabled[port] |= port_mask; + desc->handle_irq = handle_edge_irq; + break; + case IRQT_HIGH: gpio_int_type1[port] &= ~port_mask; gpio_int_type2[port] |= port_mask; - } else if (type & IRQT_LOW) { - gpio_int_enabled[port] |= port_mask; + desc->handle_irq = handle_level_irq; + break; + case IRQT_LOW: gpio_int_type1[port] &= ~port_mask; gpio_int_type2[port] &= ~port_mask; - } else { - gpio_int_enabled[port] &= ~port_mask; + desc->handle_irq = handle_level_irq; + break; + case IRQT_BOTHEDGE: + gpio_int_type1[port] |= port_mask; + /* set initial polarity based on current input level */ + if (gpio_get_value(gpio)) + gpio_int_type2[port] &= ~port_mask; /* falling */ + else + gpio_int_type2[port] |= port_mask; /* rising */ + desc->handle_irq = handle_edge_irq; + break; + default: + pr_err("ep93xx: failed to set irq type %d for gpio %d\n", + type, gpio); + return -EINVAL; } + + gpio_int_enabled[port] |= port_mask; + + desc->status &= ~IRQ_TYPE_SENSE_MASK; + desc->status |= type & IRQ_TYPE_SENSE_MASK; + update_gpio_int_params(port); return 0; @@ -385,7 +426,8 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type) static struct irq_chip ep93xx_gpio_irq_chip = { .name = "GPIO", - .ack = ep93xx_gpio_irq_mask_ack, + .ack = ep93xx_gpio_irq_ack, + .mask_ack = ep93xx_gpio_irq_mask_ack, .mask = ep93xx_gpio_irq_mask, .unmask = ep93xx_gpio_irq_unmask, .set_type = ep93xx_gpio_irq_type, -- cgit v1.2.3-59-g8ed1b From 6331acd78f7916db16ec20b50d7838bd4944cd27 Mon Sep 17 00:00:00 2001 From: Herbert Valerio Riedel Date: Mon, 26 Nov 2007 18:50:42 +0100 Subject: [ARM] 4671/1: ep93xx: remove obsolete gpio_line_* operations With the new GPIO methods in place the old gpio_line_* methods are redundant, so this patch finally removes the old legacy gpio_line_* wrappers. Signed-off-by: Herbert Valerio Riedel Acked-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/mach-ep93xx/core.c | 9 +++------ include/asm-arm/arch-ep93xx/gpio.h | 19 ------------------- 2 files changed, 3 insertions(+), 25 deletions(-) diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 2788da06417c..4cb3f742a6a1 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -189,6 +189,9 @@ static const u8 data_direction_register_offset[8] = { 0x10, 0x14, 0x34, 0x1c, 0x24, 0x18, 0x3c, 0x44, }; +#define GPIO_IN 0 +#define GPIO_OUT 1 + static void ep93xx_gpio_set_direction(unsigned line, int direction) { unsigned int data_direction_register; @@ -217,12 +220,6 @@ static void ep93xx_gpio_set_direction(unsigned line, int direction) local_irq_restore(flags); } -void __deprecated gpio_line_config(int line, int direction) -{ - ep93xx_gpio_set_direction(line, direction); -} -EXPORT_SYMBOL(gpio_line_config); - int gpio_direction_input(unsigned gpio) { if (gpio > EP93XX_GPIO_LINE_MAX) diff --git a/include/asm-arm/arch-ep93xx/gpio.h b/include/asm-arm/arch-ep93xx/gpio.h index cebb64be7e4b..9b1864bbd9a8 100644 --- a/include/asm-arm/arch-ep93xx/gpio.h +++ b/include/asm-arm/arch-ep93xx/gpio.h @@ -138,23 +138,4 @@ static inline int irq_to_gpio(unsigned irq) return irq - gpio_to_irq(0); } -/* obsolete specific GPIO API */ -#define GPIO_IN 0 -#define GPIO_OUT 1 - -#define EP93XX_GPIO_LOW 0 -#define EP93XX_GPIO_HIGH 1 - -void __deprecated gpio_line_config(int line, int direction); - -static inline int __deprecated gpio_line_get(int line) -{ - return gpio_get_value(line); -} - -static inline void __deprecated gpio_line_set(int line, int value) -{ - gpio_set_value(line, value); -} - #endif -- cgit v1.2.3-59-g8ed1b From ecdc902bf87e57e47efb6cab3999d64bfe3b2dfd Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 13 Dec 2007 00:20:05 +0100 Subject: [ARM] 4708/1: iop: update defconfigs for 2.6.24 * iop13xx, iop33x, iop32x: re-enable the IOP_ADMA driver by default * iop32x: enable RS5C372 and RTC_CLASS support Signed-off-by: Dan Williams Signed-off-by: Russell King --- arch/arm/configs/iop13xx_defconfig | 156 +++++++++++++--------------- arch/arm/configs/iop32x_defconfig | 207 ++++++++++++++++++++++--------------- arch/arm/configs/iop33x_defconfig | 154 +++++++++++++-------------- 3 files changed, 267 insertions(+), 250 deletions(-) diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig index add03c9e5553..988b4d13e76f 100644 --- a/arch/arm/configs/iop13xx_defconfig +++ b/arch/arm/configs/iop13xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22 -# Thu Jul 19 15:57:52 2007 +# Linux kernel version: 2.6.24-rc5 +# Wed Dec 12 16:11:03 2007 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -26,15 +26,11 @@ CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y @@ -45,10 +41,15 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -69,7 +70,6 @@ CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -130,6 +130,7 @@ CONFIG_ARCH_IOP13XX=y # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -151,9 +152,12 @@ CONFIG_MACH_IQ81340SC=y CONFIG_MACH_IQ81340MC=y # -# IOP13XX IMU Support +# Boot options +# + +# +# Power management # -# CONFIG_IOP_IMU is not set CONFIG_PLAT_IOP=y # @@ -185,10 +189,7 @@ CONFIG_PCI=y CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # @@ -207,6 +208,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 @@ -246,6 +248,7 @@ CONFIG_BINFMT_AOUT=y # Power management options # # CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y # # Networking @@ -285,6 +288,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -324,10 +328,6 @@ CONFIG_IPV6=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -356,6 +356,7 @@ CONFIG_IPV6=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -383,6 +384,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -423,6 +425,7 @@ CONFIG_MTD_PHYSMAP_START=0xfa000000 CONFIG_MTD_PHYSMAP_LEN=0x0 CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # @@ -463,6 +466,11 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set # # SCSI device support @@ -499,12 +507,9 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=y -CONFIG_SCSI_SAS_ATTRS=y # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set @@ -515,6 +520,7 @@ CONFIG_SCSI_SAS_ATTRS=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -555,14 +561,8 @@ CONFIG_BLK_DEV_DM=y # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set - -# -# Fusion MPT device support -# +# CONFIG_DM_UEVENT is not set # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -577,6 +577,8 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_NET_ETHERNET is not set CONFIG_NETDEV_1000=y @@ -585,6 +587,7 @@ CONFIG_NETDEV_1000=y CONFIG_E1000=y CONFIG_E1000_NAPI=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000E is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -592,6 +595,7 @@ CONFIG_E1000_NAPI=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -600,11 +604,14 @@ CONFIG_E1000_NAPI=y CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set # CONFIG_TR is not set # @@ -639,7 +646,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -688,12 +694,10 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y @@ -758,9 +762,9 @@ CONFIG_I2C_IOP3XX=y # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -768,12 +772,13 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -787,14 +792,17 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -806,29 +814,18 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set +# CONFIG_WATCHDOG is not set # -# LED drivers +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# LED Triggers +# Multifunction device drivers # +# CONFIG_MFD_SM501 is not set # # Multimedia devices @@ -840,14 +837,16 @@ CONFIG_DAB=y # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_FB is not set # # Console display driver support @@ -862,6 +861,7 @@ CONFIG_DUMMY_CONSOLE=y CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -877,16 +877,15 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set - -# -# Real Time Clock -# +# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set +CONFIG_DMADEVICES=y # -# DMA Engine support +# DMA Devices # +CONFIG_INTEL_IOP_ADMA=y CONFIG_DMA_ENGINE=y # @@ -894,12 +893,6 @@ CONFIG_DMA_ENGINE=y # # CONFIG_NET_DMA is not set -# -# DMA Devices -# -# CONFIG_INTEL_IOATDMA is not set -CONFIG_INTEL_IOP_ADMA=y - # # File systems # @@ -912,7 +905,6 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -952,7 +944,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -969,10 +960,12 @@ CONFIG_ECRYPT_FS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y @@ -981,10 +974,7 @@ CONFIG_CRAMFS=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -1037,10 +1027,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set @@ -1081,21 +1067,16 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -1104,6 +1085,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_FRAME_POINTER=y +# CONFIG_SAMPLES is not set CONFIG_DEBUG_USER=y # @@ -1112,6 +1094,7 @@ CONFIG_DEBUG_USER=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y @@ -1136,6 +1119,7 @@ CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_LRW=y +# CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1150,11 +1134,13 @@ CONFIG_CRYPTO_TEA=y CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_KHAZAD=y CONFIG_CRYPTO_ANUBIS=y +# CONFIG_CRYPTO_SEED is not set CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_MICHAEL_MIC=y CONFIG_CRYPTO_CRC32C=y # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set CONFIG_CRYPTO_HW=y # diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig index 027aef22b4d1..83f40d4041a6 100644 --- a/arch/arm/configs/iop32x_defconfig +++ b/arch/arm/configs/iop32x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22 -# Thu Jul 19 16:00:36 2007 +# Linux kernel version: 2.6.24-rc5 +# Wed Dec 12 15:49:08 2007 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -26,15 +26,11 @@ CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y @@ -45,9 +41,14 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -69,7 +70,6 @@ CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -130,6 +130,7 @@ CONFIG_ARCH_IOP32X=y # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -153,6 +154,15 @@ CONFIG_ARCH_IQ80321=y CONFIG_ARCH_IQ31244=y CONFIG_MACH_N2100=y CONFIG_IOP3XX_ATU=y +# CONFIG_MACH_EM7210 is not set + +# +# Boot options +# + +# +# Power management +# CONFIG_PLAT_IOP=y # @@ -182,11 +192,8 @@ CONFIG_XSCALE_PMU=y CONFIG_PCI=y CONFIG_PCI_SYSCALL=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -205,6 +212,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 @@ -244,6 +252,7 @@ CONFIG_BINFMT_AOUT=y # Power management options # # CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y # # Networking @@ -282,6 +291,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -321,10 +331,6 @@ CONFIG_IPV6=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -353,6 +359,7 @@ CONFIG_IPV6=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -382,6 +389,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -417,6 +425,7 @@ CONFIG_MTD_PHYSMAP_START=0x0 CONFIG_MTD_PHYSMAP_LEN=0x0 CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # @@ -459,6 +468,11 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set # CONFIG_IDE is not set # @@ -496,12 +510,9 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set @@ -512,6 +523,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -576,6 +588,7 @@ CONFIG_SATA_VITESSE=y # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set @@ -606,14 +619,8 @@ CONFIG_BLK_DEV_DM=y # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set - -# -# Fusion MPT device support -# +# CONFIG_DM_UEVENT is not set # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -628,6 +635,8 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -641,13 +650,16 @@ CONFIG_MII=y # CONFIG_DM9000 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set @@ -667,6 +679,7 @@ CONFIG_NETDEV_1000=y CONFIG_E1000=y CONFIG_E1000_NAPI=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000E is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -675,6 +688,7 @@ CONFIG_R8169=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -683,11 +697,14 @@ CONFIG_R8169=y CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set # CONFIG_TR is not set # @@ -703,7 +720,6 @@ CONFIG_NETDEV_10000=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set @@ -732,7 +748,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -781,12 +796,10 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y @@ -852,9 +865,9 @@ CONFIG_I2C_IOP3XX=y # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -862,12 +875,13 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -881,14 +895,17 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -900,29 +917,18 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set +# CONFIG_WATCHDOG is not set # -# LED drivers +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# LED Triggers +# Multifunction device drivers # +# CONFIG_MFD_SM501 is not set # # Multimedia devices @@ -935,14 +941,16 @@ CONFIG_DAB=y # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_FB is not set # # Console display driver support @@ -957,6 +965,7 @@ CONFIG_DUMMY_CONSOLE=y CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # # USB Input Devices @@ -1013,6 +1022,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set @@ -1070,28 +1080,66 @@ CONFIG_USB_MON=y # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# Real Time Clock +# RTC interfaces # -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Engine support +# I2C RTC drivers # -CONFIG_DMA_ENGINE=y +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +CONFIG_RTC_DRV_RS5C372=y +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set # -# DMA Clients +# SPI RTC drivers # -CONFIG_NET_DMA=y + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_DMADEVICES=y # # DMA Devices # -# CONFIG_INTEL_IOATDMA is not set CONFIG_INTEL_IOP_ADMA=y +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +CONFIG_NET_DMA=y # # File systems @@ -1105,7 +1153,6 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -1145,7 +1192,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1162,10 +1208,12 @@ CONFIG_ECRYPT_FS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y @@ -1174,10 +1222,7 @@ CONFIG_CRAMFS=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -1224,26 +1269,17 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set @@ -1270,10 +1306,13 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y # CONFIG_FORCED_INLINING is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y @@ -1285,6 +1324,7 @@ CONFIG_DEBUG_LL=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y @@ -1309,6 +1349,7 @@ CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_LRW=y +# CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -1323,11 +1364,13 @@ CONFIG_CRYPTO_TEA=y CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_KHAZAD=y CONFIG_CRYPTO_ANUBIS=y +# CONFIG_CRYPTO_SEED is not set CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_MICHAEL_MIC=y CONFIG_CRYPTO_CRC32C=y # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set CONFIG_CRYPTO_HW=y # diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig index 721ee64a13f7..917afb5ccfac 100644 --- a/arch/arm/configs/iop33x_defconfig +++ b/arch/arm/configs/iop33x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22 -# Thu Jul 19 16:05:59 2007 +# Linux kernel version: 2.6.24-rc5 +# Wed Dec 12 16:11:27 2007 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -26,15 +26,11 @@ CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y @@ -45,9 +41,14 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -69,7 +70,6 @@ CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -130,6 +130,7 @@ CONFIG_ARCH_IOP33X=y # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set @@ -150,6 +151,14 @@ CONFIG_IOP3XX_ATU=y # CONFIG_ARCH_IQ80331=y CONFIG_MACH_IQ80332=y + +# +# Boot options +# + +# +# Power management +# CONFIG_PLAT_IOP=y # @@ -179,11 +188,8 @@ CONFIG_XSCALE_PMU=y CONFIG_PCI=y CONFIG_PCI_SYSCALL=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -202,6 +208,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 @@ -241,6 +248,7 @@ CONFIG_BINFMT_AOUT=y # Power management options # # CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y # # Networking @@ -279,6 +287,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -318,10 +327,6 @@ CONFIG_IPV6=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -350,6 +355,7 @@ CONFIG_IPV6=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -379,6 +385,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -419,6 +426,7 @@ CONFIG_MTD_PHYSMAP_START=0x0 CONFIG_MTD_PHYSMAP_LEN=0x0 CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # @@ -459,6 +467,11 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set # CONFIG_IDE is not set # @@ -496,12 +509,9 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set @@ -512,6 +522,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -552,14 +563,8 @@ CONFIG_BLK_DEV_DM=y # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set - -# -# Fusion MPT device support -# +# CONFIG_DM_UEVENT is not set # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -574,6 +579,8 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_NET_ETHERNET is not set CONFIG_NETDEV_1000=y @@ -582,6 +589,7 @@ CONFIG_NETDEV_1000=y CONFIG_E1000=y CONFIG_E1000_NAPI=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000E is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -589,6 +597,7 @@ CONFIG_E1000_NAPI=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -597,11 +606,14 @@ CONFIG_E1000_NAPI=y CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set # CONFIG_TR is not set # @@ -636,7 +648,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -685,12 +696,10 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y @@ -755,9 +764,9 @@ CONFIG_I2C_IOP3XX=y # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -765,12 +774,13 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -784,14 +794,17 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -803,29 +816,18 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set +# CONFIG_WATCHDOG is not set # -# LED drivers +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# LED Triggers +# Multifunction device drivers # +# CONFIG_MFD_SM501 is not set # # Multimedia devices @@ -837,14 +839,16 @@ CONFIG_DAB=y # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_FB is not set # # Console display driver support @@ -859,6 +863,7 @@ CONFIG_DUMMY_CONSOLE=y CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -874,16 +879,15 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set - -# -# Real Time Clock -# +# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set +CONFIG_DMADEVICES=y # -# DMA Engine support +# DMA Devices # +CONFIG_INTEL_IOP_ADMA=y CONFIG_DMA_ENGINE=y # @@ -891,12 +895,6 @@ CONFIG_DMA_ENGINE=y # CONFIG_NET_DMA=y -# -# DMA Devices -# -# CONFIG_INTEL_IOATDMA is not set -CONFIG_INTEL_IOP_ADMA=y - # # File systems # @@ -909,7 +907,6 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -949,7 +946,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -969,10 +965,7 @@ CONFIG_CRAMFS=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -1019,26 +1012,17 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set @@ -1065,10 +1049,13 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y # CONFIG_FORCED_INLINING is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set CONFIG_DEBUG_LL=y @@ -1079,6 +1066,7 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y -- cgit v1.2.3-59-g8ed1b From bd7b8858631bf335ce6e8b4a985b7f951041b572 Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Thu, 27 Dec 2007 14:09:07 +0100 Subject: [ARM] 4732/1: GLAN Tank: register rtc-rs5c372 i2c device Use the new i2c framework to load rtc-rs5c372 for the GLAN Tank. Tested-by: Gordon Farquharson Signed-off-by: Martin Michlmayr Acked-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/mach-iop32x/glantank.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c index 2b086ab2668c..6309f9a99fd5 100644 --- a/arch/arm/mach-iop32x/glantank.c +++ b/arch/arm/mach-iop32x/glantank.c @@ -3,7 +3,7 @@ * * Board support code for the GLAN Tank. * - * Copyright (C) 2006 Martin Michlmayr + * Copyright (C) 2006, 2007 Martin Michlmayr * Copyright (C) 2006 Lennert Buytenhek * * This program is free software; you can redistribute it and/or modify it @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -166,6 +167,13 @@ static struct platform_device glantank_serial_device = { .resource = &glantank_uart_resource, }; +static struct i2c_board_info __initdata glantank_i2c_devices[] = { + { + I2C_BOARD_INFO("rtc-rs5c372", 0x32), + .type = "rs5c372a", + }, +}; + static void glantank_power_off(void) { __raw_writeb(0x01, 0xfe8d0004); @@ -183,6 +191,9 @@ static void __init glantank_init_machine(void) platform_device_register(&iop3xx_dma_0_channel); platform_device_register(&iop3xx_dma_1_channel); + i2c_register_board_info(0, glantank_i2c_devices, + ARRAY_SIZE(glantank_i2c_devices)); + pm_power_off = glantank_power_off; } -- cgit v1.2.3-59-g8ed1b From 7d77ce8f67358c6b7708726f8fa230cd58d75b2c Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Mon, 15 Oct 2007 13:09:19 +0100 Subject: [ARM] 4601/1: KS8695: PCI support This patch adds support for the PCI Host controller integrated in the Kendin/Micrel KS8695 processor. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-ks8695/Makefile | 2 +- arch/arm/mach-ks8695/board-micrel.c | 2 +- arch/arm/mach-ks8695/pci.c | 326 ++++++++++++++++++++++++++++++++++++ 3 files changed, 328 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-ks8695/pci.c diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile index 2a07a281fa8a..730a3af12c98 100644 --- a/arch/arm/mach-ks8695/Makefile +++ b/arch/arm/mach-ks8695/Makefile @@ -9,7 +9,7 @@ obj-n := obj- := # PCI support is optional -#obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_PCI) += pci.o # Board-specific support obj-$(CONFIG_MACH_KS8695) += board-micrel.o diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c index 2feeef81d843..05ac2bd04020 100644 --- a/arch/arm/mach-ks8695/board-micrel.c +++ b/arch/arm/mach-ks8695/board-micrel.c @@ -40,7 +40,7 @@ static void __init micrel_init(void) printk(KERN_INFO "Micrel KS8695 Development Board initializing\n"); #ifdef CONFIG_PCI -// ks8695_init_pci(&micrel_pci); + ks8695_init_pci(&micrel_pci); #endif /* Add devices */ diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c new file mode 100644 index 000000000000..3f4e0330cb1a --- /dev/null +++ b/arch/arm/mach-ks8695/pci.c @@ -0,0 +1,326 @@ +/* + * arch/arm/mach-ks8695/pci.c + * + * Copyright (C) 2003, Micrel Semiconductors + * Copyright (C) 2006, Greg Ungerer + * Copyright (C) 2006, Ben Dooks + * Copyright (C) 2007, Andrew Victor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include + + +static int pci_dbg; +static int pci_cfg_dbg; + + +static void ks8695_pci_setupconfig(unsigned int bus_nr, unsigned int devfn, unsigned int where) +{ + unsigned long pbca; + + pbca = PBCA_ENABLE | (where & ~3); + pbca |= PCI_SLOT(devfn) << 11 ; + pbca |= PCI_FUNC(devfn) << 8; + pbca |= bus_nr << 16; + + if (bus_nr == 0) { + /* use Type-0 transaction */ + __raw_writel(pbca, KS8695_PCI_VA + KS8695_PBCA); + } else { + /* use Type-1 transaction */ + __raw_writel(pbca | PBCA_TYPE1, KS8695_PCI_VA + KS8695_PBCA); + } +} + + +/* + * The KS8695 datasheet prohibits anything other than 32bit accesses + * to the IO registers, so all our configuration must be done with + * 32bit operations, and the correct bit masking and shifting. + */ + +static int ks8695_pci_readconfig(struct pci_bus *bus, + unsigned int devfn, int where, int size, u32 *value) +{ + ks8695_pci_setupconfig(bus->number, devfn, where); + + *value = __raw_readl(KS8695_PCI_VA + KS8695_PBCD); + + switch (size) { + case 4: + break; + case 2: + *value = *value >> ((where & 2) * 8); + *value &= 0xffff; + break; + case 1: + *value = *value >> ((where & 3) * 8); + *value &= 0xff; + break; + } + + if (pci_cfg_dbg) { + printk("read: %d,%08x,%02x,%d: %08x (%08x)\n", + bus->number, devfn, where, size, *value, + __raw_readl(KS8695_PCI_VA + KS8695_PBCD)); + } + + return PCIBIOS_SUCCESSFUL; +} + +static int ks8695_pci_writeconfig(struct pci_bus *bus, + unsigned int devfn, int where, int size, u32 value) +{ + unsigned long tmp; + + if (pci_cfg_dbg) { + printk("write: %d,%08x,%02x,%d: %08x\n", + bus->number, devfn, where, size, value); + } + + ks8695_pci_setupconfig(bus->number, devfn, where); + + switch (size) { + case 4: + __raw_writel(value, KS8695_PCI_VA + KS8695_PBCD); + break; + case 2: + tmp = __raw_readl(KS8695_PCI_VA + KS8695_PBCD); + tmp &= ~(0xffff << ((where & 2) * 8)); + tmp |= value << ((where & 2) * 8); + + __raw_writel(tmp, KS8695_PCI_VA + KS8695_PBCD); + break; + case 1: + tmp = __raw_readl(KS8695_PCI_VA + KS8695_PBCD); + tmp &= ~(0xff << ((where & 3) * 8)); + tmp |= value << ((where & 3) * 8); + + __raw_writel(tmp, KS8695_PCI_VA + KS8695_PBCD); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static void ks8695_local_writeconfig(int where, u32 value) +{ + ks8695_pci_setupconfig(0, 0, where); + __raw_writel(value, KS8695_PCI_VA + KS8695_PBCD); +} + +static struct pci_ops ks8695_pci_ops = { + .read = ks8695_pci_readconfig, + .write = ks8695_pci_writeconfig, +}; + +static struct pci_bus *ks8695_pci_scan_bus(int nr, struct pci_sys_data *sys) +{ + return pci_scan_bus(sys->busnr, &ks8695_pci_ops, sys); +} + +static struct resource pci_mem = { + .name = "PCI Memory space", + .start = KS8695_PCIMEM_PA, + .end = KS8695_PCIMEM_PA + (KS8695_PCIMEM_SIZE - 1), + .flags = IORESOURCE_MEM, +}; + +static struct resource pci_io = { + .name = "PCI IO space", + .start = KS8695_PCIIO_PA, + .end = KS8695_PCIIO_PA + (KS8695_PCIIO_SIZE - 1), + .flags = IORESOURCE_IO, +}; + +static int __init ks8695_pci_setup(int nr, struct pci_sys_data *sys) +{ + if (nr > 0) + return 0; + + request_resource(&iomem_resource, &pci_mem); + request_resource(&ioport_resource, &pci_io); + + sys->resource[0] = &pci_io; + sys->resource[1] = &pci_mem; + sys->resource[2] = NULL; + + /* Assign and enable processor bridge */ + ks8695_local_writeconfig(PCI_BASE_ADDRESS_0, KS8695_PCIMEM_PA); + + /* Enable bus-master & Memory Space access */ + ks8695_local_writeconfig(PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); + + /* Set cache-line size & latency. */ + ks8695_local_writeconfig(PCI_CACHE_LINE_SIZE, (32 << 8) | (L1_CACHE_BYTES / sizeof(u32))); + + /* Reserve PCI memory space for PCI-AHB resources */ + if (!request_mem_region(KS8695_PCIMEM_PA, SZ_64M, "PCI-AHB Bridge")) { + printk(KERN_ERR "Cannot allocate PCI-AHB Bridge memory.\n"); + return -EBUSY; + } + + return 1; +} + +static inline unsigned int size_mask(unsigned long size) +{ + return (~size) + 1; +} + +static int ks8695_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) +{ + unsigned long pc = instruction_pointer(regs); + unsigned long instr = *(unsigned long *)pc; + unsigned long cmdstat; + + cmdstat = __raw_readl(KS8695_PCI_VA + KS8695_CRCFCS); + + printk(KERN_ERR "PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx [%s%s%s%s%s]\n", + addr, fsr, regs->ARM_pc, regs->ARM_lr, + cmdstat & (PCI_STATUS_SIG_TARGET_ABORT << 16) ? "GenTarget" : " ", + cmdstat & (PCI_STATUS_REC_TARGET_ABORT << 16) ? "RecvTarget" : " ", + cmdstat & (PCI_STATUS_REC_MASTER_ABORT << 16) ? "MasterAbort" : " ", + cmdstat & (PCI_STATUS_SIG_SYSTEM_ERROR << 16) ? "SysError" : " ", + cmdstat & (PCI_STATUS_DETECTED_PARITY << 16) ? "Parity" : " " + ); + + __raw_writel(cmdstat, KS8695_PCI_VA + KS8695_CRCFCS); + + /* + * If the instruction being executed was a read, + * make it look like it read all-ones. + */ + if ((instr & 0x0c100000) == 0x04100000) { + int reg = (instr >> 12) & 15; + unsigned long val; + + if (instr & 0x00400000) + val = 255; + else + val = -1; + + regs->uregs[reg] = val; + regs->ARM_pc += 4; + return 0; + } + + if ((instr & 0x0e100090) == 0x00100090) { + int reg = (instr >> 12) & 15; + + regs->uregs[reg] = -1; + regs->ARM_pc += 4; + return 0; + } + + return 1; +} + +static void __init ks8695_pci_preinit(void) +{ + /* stage 1 initialization, subid, subdevice = 0x0001 */ + __raw_writel(0x00010001, KS8695_PCI_VA + KS8695_CRCSID); + + /* stage 2 initialization */ + /* prefetch limits with 16 words, retry enable */ + __raw_writel(0x40000000, KS8695_PCI_VA + KS8695_PBCS); + + /* configure memory mapping */ + __raw_writel(KS8695_PCIMEM_PA, KS8695_PCI_VA + KS8695_PMBA); + __raw_writel(size_mask(KS8695_PCIMEM_SIZE), KS8695_PCI_VA + KS8695_PMBAM); + __raw_writel(KS8695_PCIMEM_PA, KS8695_PCI_VA + KS8695_PMBAT); + __raw_writel(0, KS8695_PCI_VA + KS8695_PMBAC); + + /* configure IO mapping */ + __raw_writel(KS8695_PCIIO_PA, KS8695_PCI_VA + KS8695_PIOBA); + __raw_writel(size_mask(KS8695_PCIIO_SIZE), KS8695_PCI_VA + KS8695_PIOBAM); + __raw_writel(KS8695_PCIIO_PA, KS8695_PCI_VA + KS8695_PIOBAT); + __raw_writel(0, KS8695_PCI_VA + KS8695_PIOBAC); + + /* hook in fault handlers */ + hook_fault_code(8, ks8695_pci_fault, SIGBUS, "external abort on non-linefetch"); + hook_fault_code(10, ks8695_pci_fault, SIGBUS, "external abort on non-linefetch"); +} + +static void ks8695_show_pciregs(void) +{ + if (!pci_dbg) + return; + + printk(KERN_INFO "PCI: CRCFID = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFID)); + printk(KERN_INFO "PCI: CRCFCS = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFCS)); + printk(KERN_INFO "PCI: CRCFRV = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFRV)); + printk(KERN_INFO "PCI: CRCFLT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFLT)); + printk(KERN_INFO "PCI: CRCBMA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCBMA)); + printk(KERN_INFO "PCI: CRCSID = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCSID)); + printk(KERN_INFO "PCI: CRCFIT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFIT)); + + printk(KERN_INFO "PCI: PBM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PBM)); + printk(KERN_INFO "PCI: PBCS = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PBCS)); + + printk(KERN_INFO "PCI: PMBA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBA)); + printk(KERN_INFO "PCI: PMBAC = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAC)); + printk(KERN_INFO "PCI: PMBAM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAM)); + printk(KERN_INFO "PCI: PMBAT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAT)); + + printk(KERN_INFO "PCI: PIOBA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBA)); + printk(KERN_INFO "PCI: PIOBAC = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAC)); + printk(KERN_INFO "PCI: PIOBAM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAM)); + printk(KERN_INFO "PCI: PIOBAT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAT)); +} + + +static struct hw_pci ks8695_pci __initdata = { + .nr_controllers = 1, + .preinit = ks8695_pci_preinit, + .setup = ks8695_pci_setup, + .scan = ks8695_pci_scan_bus, + .postinit = NULL, + .swizzle = pci_std_swizzle, + .map_irq = NULL, +}; + +void __init ks8695_init_pci(struct ks8695_pci_cfg *cfg) +{ + if (__raw_readl(KS8695_PCI_VA + KS8695_CRCFRV) & CFRV_GUEST) { + printk("PCI: KS8695 in guest mode, not initialising\n"); + return; + } + + printk(KERN_INFO "PCI: Initialising\n"); + ks8695_show_pciregs(); + + /* set Mode */ + __raw_writel(cfg->mode << 29, KS8695_PCI_VA + KS8695_PBM); + + ks8695_pci.map_irq = cfg->map_irq; /* board-specific map_irq method */ + + pci_common_init(&ks8695_pci); +} -- cgit v1.2.3-59-g8ed1b From 20118ff97823822bf4d52ccb528ce2b5042c3057 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Mon, 15 Oct 2007 14:27:41 +0100 Subject: [ARM] 4603/1: KS8695: debugfs interface to view pin state This patch adds a debug interface (if CONFIG_DEBUG_FS is selected) to display the basic configuration and current state of the GPIO pins on the Kendin/Micrel KS8695 processor. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-ks8695/gpio.c | 83 +++++++++++++++++++++++++++++++++ include/asm-arm/arch-ks8695/regs-gpio.h | 2 + 2 files changed, 85 insertions(+) diff --git a/arch/arm/mach-ks8695/gpio.c b/arch/arm/mach-ks8695/gpio.c index b1aa3cb3d4a3..5e46191c0af9 100644 --- a/arch/arm/mach-ks8695/gpio.c +++ b/arch/arm/mach-ks8695/gpio.c @@ -20,6 +20,8 @@ #include #include #include +#include +#include #include #include @@ -216,3 +218,84 @@ int irq_to_gpio(unsigned int irq) return (irq - KS8695_IRQ_EXTERN0); } EXPORT_SYMBOL(irq_to_gpio); + + +/* .... Debug interface ..................................................... */ + +#ifdef CONFIG_DEBUG_FS + +static int ks8695_gpio_show(struct seq_file *s, void *unused) +{ + unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN }; + unsigned int intmask[] = { IOPC_IOEINT0TM, IOPC_IOEINT1TM, IOPC_IOEINT2TM, IOPC_IOEINT3TM }; + unsigned long mode, ctrl, data; + int i; + + mode = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM); + ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC); + data = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD); + + seq_printf(s, "Pin\tI/O\tFunction\tState\n\n"); + + for (i = KS8695_GPIO_0; i <= KS8695_GPIO_15 ; i++) { + seq_printf(s, "%i:\t", i); + + seq_printf(s, "%s\t", (mode & IOPM_(i)) ? "Output" : "Input"); + + if (i <= KS8695_GPIO_3) { + if (ctrl & enable[i]) { + seq_printf(s, "EXT%i ", i); + + switch ((ctrl & intmask[i]) >> (4 * i)) { + case IOPC_TM_LOW: + seq_printf(s, "(Low)"); break; + case IOPC_TM_HIGH: + seq_printf(s, "(High)"); break; + case IOPC_TM_RISING: + seq_printf(s, "(Rising)"); break; + case IOPC_TM_FALLING: + seq_printf(s, "(Falling)"); break; + case IOPC_TM_EDGE: + seq_printf(s, "(Edges)"); break; + } + } + else + seq_printf(s, "GPIO\t"); + } + else if (i <= KS8695_GPIO_5) { + if (ctrl & enable[i]) + seq_printf(s, "TOUT%i\t", i - KS8695_GPIO_4); + else + seq_printf(s, "GPIO\t"); + } + else + seq_printf(s, "GPIO\t"); + + seq_printf(s, "\t"); + + seq_printf(s, "%i\n", (data & IOPD_(i)) ? 1 : 0); + } + return 0; +} + +static int ks8695_gpio_open(struct inode *inode, struct file *file) +{ + return single_open(file, ks8695_gpio_show, NULL); +} + +static const struct file_operations ks8695_gpio_operations = { + .open = ks8695_gpio_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init ks8695_gpio_debugfs_init(void) +{ + /* /sys/kernel/debug/ks8695_gpio */ + (void) debugfs_create_file("ks8695_gpio", S_IFREG | S_IRUGO, NULL, NULL, &ks8695_gpio_operations); + return 0; +} +postcore_initcall(ks8695_gpio_debugfs_init); + +#endif diff --git a/include/asm-arm/arch-ks8695/regs-gpio.h b/include/asm-arm/arch-ks8695/regs-gpio.h index 57fcf9fc82e4..6b95d77aea19 100644 --- a/include/asm-arm/arch-ks8695/regs-gpio.h +++ b/include/asm-arm/arch-ks8695/regs-gpio.h @@ -49,5 +49,7 @@ #define IOPC_TM_FALLING (4) /* Falling Edge Detection */ #define IOPC_TM_EDGE (6) /* Both Edge Detection */ +/* Port Data Register */ +#define IOPD_(x) (1 << (x)) /* Signal Level of GPIO Pin x */ #endif -- cgit v1.2.3-59-g8ed1b From 3042102a28501510a409fe86962f20369e325cf2 Mon Sep 17 00:00:00 2001 From: Brian Swetland Date: Mon, 26 Nov 2007 04:11:43 -0800 Subject: [ARM] msm: core platform support for ARCH_MSM7X00A - core header files for arch-msm - Kconfig and Makefiles to enable ARCH_MSM7X00A builds - MSM7X00A specific arch_idle - peripheral iomap and irq number definitions Signed-off-by: Brian Swetland --- arch/arm/Kconfig | 11 ++++ arch/arm/Makefile | 1 + arch/arm/mach-msm/Makefile | 2 + arch/arm/mach-msm/Makefile.boot | 3 + arch/arm/mach-msm/idle.S | 36 ++++++++++++ arch/arm/mach-msm/io.c | 85 +++++++++++++++++++++++++++ arch/arm/mm/Kconfig | 3 +- include/asm-arm/arch-msm/board.h | 37 ++++++++++++ include/asm-arm/arch-msm/debug-macro.S | 40 +++++++++++++ include/asm-arm/arch-msm/dma.h | 1 + include/asm-arm/arch-msm/entry-macro.S | 38 ++++++++++++ include/asm-arm/arch-msm/hardware.h | 18 ++++++ include/asm-arm/arch-msm/io.h | 33 +++++++++++ include/asm-arm/arch-msm/irqs.h | 89 ++++++++++++++++++++++++++++ include/asm-arm/arch-msm/memory.h | 27 +++++++++ include/asm-arm/arch-msm/msm_iomap.h | 104 +++++++++++++++++++++++++++++++++ include/asm-arm/arch-msm/system.h | 23 ++++++++ include/asm-arm/arch-msm/timex.h | 20 +++++++ include/asm-arm/arch-msm/uncompress.h | 36 ++++++++++++ include/asm-arm/arch-msm/vmalloc.h | 22 +++++++ 20 files changed, 628 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-msm/Makefile create mode 100644 arch/arm/mach-msm/Makefile.boot create mode 100644 arch/arm/mach-msm/idle.S create mode 100644 arch/arm/mach-msm/io.c create mode 100644 include/asm-arm/arch-msm/board.h create mode 100644 include/asm-arm/arch-msm/debug-macro.S create mode 100644 include/asm-arm/arch-msm/dma.h create mode 100644 include/asm-arm/arch-msm/entry-macro.S create mode 100644 include/asm-arm/arch-msm/hardware.h create mode 100644 include/asm-arm/arch-msm/io.h create mode 100644 include/asm-arm/arch-msm/irqs.h create mode 100644 include/asm-arm/arch-msm/memory.h create mode 100644 include/asm-arm/arch-msm/msm_iomap.h create mode 100644 include/asm-arm/arch-msm/system.h create mode 100644 include/asm-arm/arch-msm/timex.h create mode 100644 include/asm-arm/arch-msm/uncompress.h create mode 100644 include/asm-arm/arch-msm/vmalloc.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a04f507e7f2c..89c3811132c2 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -409,6 +409,17 @@ config ARCH_OMAP help Support for TI's OMAP platform (OMAP1 and OMAP2). +config ARCH_MSM7X00A + bool "Qualcomm MSM7X00A" + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + help + Support for Qualcomm MSM7X00A based systems. This runs on the ARM11 + apps processor of the MSM7X00A and depends on a shared memory + interface to the ARM9 modem processor which runs the baseband stack + and controls some vital subsystems (clock and power control, etc). + + endchoice source "arch/arm/mach-clps711x/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 35e56c99ad1d..dd220d189843 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -139,6 +139,7 @@ endif machine-$(CONFIG_ARCH_KS8695) := ks8695 incdir-$(CONFIG_ARCH_MXC) := mxc machine-$(CONFIG_ARCH_MX3) := mx3 + machine-$(CONFIG_ARCH_MSM7X00A) := msm ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile new file mode 100644 index 000000000000..feb9e469df9a --- /dev/null +++ b/arch/arm/mach-msm/Makefile @@ -0,0 +1,2 @@ +obj-y += io.o idle.o + diff --git a/arch/arm/mach-msm/Makefile.boot b/arch/arm/mach-msm/Makefile.boot new file mode 100644 index 000000000000..24dfbf8c07c4 --- /dev/null +++ b/arch/arm/mach-msm/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x10008000 +params_phys-y := 0x10000100 +initrd_phys-y := 0x10800000 diff --git a/arch/arm/mach-msm/idle.S b/arch/arm/mach-msm/idle.S new file mode 100644 index 000000000000..2b1cb7f16943 --- /dev/null +++ b/arch/arm/mach-msm/idle.S @@ -0,0 +1,36 @@ +/* linux/include/asm-arm/arch-msm/idle.S + * + * Idle processing for MSM7K - work around bugs with SWFI. + * + * Copyright (c) 2007 QUALCOMM Incorporated. + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include + +ENTRY(arch_idle) +#ifdef CONFIG_MSM7X00A_IDLE + mrc p15, 0, r1, c1, c0, 0 /* read current CR */ + bic r0, r1, #(1 << 2) /* clear dcache bit */ + bic r0, r0, #(1 << 12) /* clear icache bit */ + mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */ + + mov r0, #0 /* prepare wfi value */ + mcr p15, 0, r0, c7, c10, 0 /* flush the cache */ + mcr p15, 0, r0, c7, c10, 4 /* memory barrier */ + mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */ + + mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */ +#endif + mov pc, lr diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c new file mode 100644 index 000000000000..c39edb994a88 --- /dev/null +++ b/arch/arm/mach-msm/io.c @@ -0,0 +1,85 @@ +/* arch/arm/mach-msm/io.c + * + * MSM7K io support + * + * Copyright (C) 2007 Google, Inc. + * Author: Brian Swetland + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include + +#include +#include +#include +#include +#include + +#include + +#define MSM_DEVICE(name) { \ + .virtual = MSM_##name##_BASE, \ + .pfn = __phys_to_pfn(MSM_##name##_PHYS), \ + .length = MSM_##name##_SIZE, \ + .type = MT_DEVICE_NONSHARED, \ + } + +static struct map_desc msm_io_desc[] __initdata = { + MSM_DEVICE(VIC), + MSM_DEVICE(CSR), + MSM_DEVICE(GPT), + MSM_DEVICE(DMOV), + MSM_DEVICE(UART1), + MSM_DEVICE(UART2), + MSM_DEVICE(UART3), + MSM_DEVICE(I2C), + MSM_DEVICE(GPIO1), + MSM_DEVICE(GPIO2), + MSM_DEVICE(HSUSB), + MSM_DEVICE(CLK_CTL), + MSM_DEVICE(PMDH), + MSM_DEVICE(EMDH), + MSM_DEVICE(MDP), + { + .virtual = MSM_SHARED_RAM_BASE, + .pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS), + .length = MSM_SHARED_RAM_SIZE, + .type = MT_DEVICE, + }, +}; + +void __init msm_map_common_io(void) +{ + /* Make sure the peripheral register window is closed, since + * we will use PTE flags (TEX[1]=1,B=0,C=1) to determine which + * pages are peripheral interface or not. + */ + asm("mcr p15, 0, %0, c15, c2, 4" : : "r" (0)); + + iotable_init(msm_io_desc, ARRAY_SIZE(msm_io_desc)); +} + +void __iomem * +__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype) +{ + if (mtype == MT_DEVICE) { + /* The peripherals in the 88000000 - D0000000 range + * are only accessable by type MT_DEVICE_NONSHARED. + * Adjust mtype as necessary to make this "just work." + */ + if ((phys_addr >= 0x88000000) && (phys_addr < 0xD0000000)) + mtype = MT_DEVICE_NONSHARED; + } + + return __arm_ioremap(phys_addr, size, mtype); +} diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 7868f4dc1d00..bc2ca3c03a48 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -345,8 +345,9 @@ config CPU_XSC3 # ARMv6 config CPU_V6 bool "Support ARM V6 processor" - depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 + depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM7X00A default y if ARCH_MX3 + default y if ARCH_MSM7X00A select CPU_32v6 select CPU_ABRT_EV6 select CPU_CACHE_V6 diff --git a/include/asm-arm/arch-msm/board.h b/include/asm-arm/arch-msm/board.h new file mode 100644 index 000000000000..763051f8ba14 --- /dev/null +++ b/include/asm-arm/arch-msm/board.h @@ -0,0 +1,37 @@ +/* linux/include/asm-arm/arch-msm/board.h + * + * Copyright (C) 2007 Google, Inc. + * Author: Brian Swetland + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ASM_ARCH_MSM_BOARD_H +#define __ASM_ARCH_MSM_BOARD_H + +#include + +/* platform device data structures */ + +struct msm_mddi_platform_data +{ + void (*panel_power)(int on); + unsigned has_vsync_irq:1; +}; + +/* common init routines for use by arch/arm/mach-msm/board-*.c */ + +void __init msm_add_devices(void); +void __init msm_map_common_io(void); +void __init msm_init_irq(void); +void __init msm_init_gpio(void); + +#endif diff --git a/include/asm-arm/arch-msm/debug-macro.S b/include/asm-arm/arch-msm/debug-macro.S new file mode 100644 index 000000000000..393d5272e506 --- /dev/null +++ b/include/asm-arm/arch-msm/debug-macro.S @@ -0,0 +1,40 @@ +/* include/asm-arm/arch-msm7200/debug-macro.S + * + * Copyright (C) 2007 Google, Inc. + * Author: Brian Swetland + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include + + .macro addruart,rx + @ see if the MMU is enabled and select appropriate base address + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 + ldreq \rx, =MSM_UART1_PHYS + ldrne \rx, =MSM_UART1_BASE + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #0x0C] + .endm + + .macro waituart,rd,rx + @ wait for TX_READY +1: ldr \rd, [\rx, #0x08] + tst \rd, #0x04 + beq 1b + .endm + + .macro busyuart,rd,rx + .endm diff --git a/include/asm-arm/arch-msm/dma.h b/include/asm-arm/arch-msm/dma.h new file mode 100644 index 000000000000..8b137891791f --- /dev/null +++ b/include/asm-arm/arch-msm/dma.h @@ -0,0 +1 @@ + diff --git a/include/asm-arm/arch-msm/entry-macro.S b/include/asm-arm/arch-msm/entry-macro.S new file mode 100644 index 000000000000..ee24aece4cb0 --- /dev/null +++ b/include/asm-arm/arch-msm/entry-macro.S @@ -0,0 +1,38 @@ +/* include/asm-arm/arch-msm7200/entry-macro.S + * + * Copyright (C) 2007 Google, Inc. + * Author: Brian Swetland + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + @ enable imprecise aborts + cpsie a + mov \base, #MSM_VIC_BASE + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + @ 0xD0 has irq# or old irq# if the irq has been handled + @ 0xD4 has irq# or -1 if none pending *but* if you just + @ read 0xD4 you never get the first irq for some reason + ldr \irqnr, [\base, #0xD0] + ldr \irqnr, [\base, #0xD4] + cmp \irqnr, #0xffffffff + .endm diff --git a/include/asm-arm/arch-msm/hardware.h b/include/asm-arm/arch-msm/hardware.h new file mode 100644 index 000000000000..89af2b70182f --- /dev/null +++ b/include/asm-arm/arch-msm/hardware.h @@ -0,0 +1,18 @@ +/* linux/include/asm-arm/arch-msm/hardware.h + * + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ASM_ARCH_MSM_HARDWARE_H + +#endif diff --git a/include/asm-arm/arch-msm/io.h b/include/asm-arm/arch-msm/io.h new file mode 100644 index 000000000000..4645ae26b62a --- /dev/null +++ b/include/asm-arm/arch-msm/io.h @@ -0,0 +1,33 @@ +/* include/asm-arm/arch-msm/io.h + * + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +#define __arch_ioremap __msm_ioremap +#define __arch_iounmap __iounmap + +void __iomem *__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype); + +static inline void __iomem *__io(unsigned long addr) +{ + return (void __iomem *)addr; +} +#define __io(a) __io(a) +#define __mem_pci(a) (a) + +#endif diff --git a/include/asm-arm/arch-msm/irqs.h b/include/asm-arm/arch-msm/irqs.h new file mode 100644 index 000000000000..565430cfaa7e --- /dev/null +++ b/include/asm-arm/arch-msm/irqs.h @@ -0,0 +1,89 @@ +/* linux/include/asm-arm/arch-msm/irqs.h + * + * Copyright (C) 2007 Google, Inc. + * Author: Brian Swetland + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ASM_ARCH_MSM_IRQS_H + +/* MSM ARM11 Interrupt Numbers */ +/* See 80-VE113-1 A, pp219-221 */ + +#define INT_A9_M2A_0 0 +#define INT_A9_M2A_1 1 +#define INT_A9_M2A_2 2 +#define INT_A9_M2A_3 3 +#define INT_A9_M2A_4 4 +#define INT_A9_M2A_5 5 +#define INT_A9_M2A_6 6 +#define INT_GP_TIMER_EXP 7 +#define INT_DEBUG_TIMER_EXP 8 +#define INT_UART1 9 +#define INT_UART2 10 +#define INT_UART3 11 +#define INT_UART1_RX 12 +#define INT_UART2_RX 13 +#define INT_UART3_RX 14 +#define INT_USB_OTG 15 +#define INT_MDDI_PRI 16 +#define INT_MDDI_EXT 17 +#define INT_MDDI_CLIENT 18 +#define INT_MDP 19 +#define INT_GRAPHICS 20 +#define INT_ADM_AARM 21 +#define INT_ADSP_A11 22 +#define INT_ADSP_A9_A11 23 +#define INT_SDC1_0 24 +#define INT_SDC1_1 25 +#define INT_SDC2_0 26 +#define INT_SDC2_1 27 +#define INT_KEYSENSE 28 +#define INT_TCHSCRN_SSBI 29 +#define INT_TCHSCRN1 30 +#define INT_TCHSCRN2 31 + +#define INT_GPIO_GROUP1 (32 + 0) +#define INT_GPIO_GROUP2 (32 + 1) +#define INT_PWB_I2C (32 + 2) +#define INT_SOFTRESET (32 + 3) +#define INT_NAND_WR_ER_DONE (32 + 4) +#define INT_NAND_OP_DONE (32 + 5) +#define INT_PBUS_ARM11 (32 + 6) +#define INT_AXI_MPU_SMI (32 + 7) +#define INT_AXI_MPU_EBI1 (32 + 8) +#define INT_AD_HSSD (32 + 9) +#define INT_ARM11_PMU (32 + 10) +#define INT_ARM11_DMA (32 + 11) +#define INT_TSIF_IRQ (32 + 12) +#define INT_UART1DM_IRQ (32 + 13) +#define INT_UART1DM_RX (32 + 14) +#define INT_USB_HS (32 + 15) +#define INT_SDC3_0 (32 + 16) +#define INT_SDC3_1 (32 + 17) +#define INT_SDC4_0 (32 + 18) +#define INT_SDC4_1 (32 + 19) +#define INT_UART2DM_RX (32 + 20) +#define INT_UART2DM_IRQ (32 + 21) + +/* 22-31 are reserved */ + +#define MSM_IRQ_BIT(irq) (1 << ((irq) & 31)) + +#define NR_MSM_IRQS 64 +#define NR_GPIO_IRQS 122 +#define NR_BOARD_IRQS 64 +#define NR_IRQS (NR_MSM_IRQS + NR_GPIO_IRQS + NR_BOARD_IRQS) + +#define MSM_GPIO_TO_INT(n) (NR_MSM_IRQS + (n)) + +#endif diff --git a/include/asm-arm/arch-msm/memory.h b/include/asm-arm/arch-msm/memory.h new file mode 100644 index 000000000000..b5ce0e9ac86d --- /dev/null +++ b/include/asm-arm/arch-msm/memory.h @@ -0,0 +1,27 @@ +/* linux/include/asm-arm/arch-msm/memory.h + * + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* physical offset of RAM */ +#define PHYS_OFFSET UL(0x10000000) + +/* bus address and physical addresses are identical */ +#define __virt_to_bus(x) __virt_to_phys(x) +#define __bus_to_virt(x) __phys_to_virt(x) + +#endif + diff --git a/include/asm-arm/arch-msm/msm_iomap.h b/include/asm-arm/arch-msm/msm_iomap.h new file mode 100644 index 000000000000..b8955cc26fec --- /dev/null +++ b/include/asm-arm/arch-msm/msm_iomap.h @@ -0,0 +1,104 @@ +/* linux/include/asm-arm/arch-msm/msm_iomap.h + * + * Copyright (C) 2007 Google, Inc. + * Author: Brian Swetland + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * The MSM peripherals are spread all over across 768MB of physical + * space, which makes just having a simple IO_ADDRESS macro to slide + * them into the right virtual location rough. Instead, we will + * provide a master phys->virt mapping for peripherals here. + * + */ + +#ifndef __ASM_ARCH_MSM_IOMAP_H +#define __ASM_ARCH_MSM_IOMAP_H + +#include + +/* Physical base address and size of peripherals. + * Ordered by the virtual base addresses they will be mapped at. + * + * MSM_VIC_BASE must be an value that can be loaded via a "mov" + * instruction, otherwise entry-macro.S will not compile. + * + * If you add or remove entries here, you'll want to edit the + * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your + * changes. + * + */ + +#define MSM_VIC_BASE 0xE0000000 +#define MSM_VIC_PHYS 0xC0000000 +#define MSM_VIC_SIZE SZ_4K + +#define MSM_CSR_BASE 0xE0001000 +#define MSM_CSR_PHYS 0xC0100000 +#define MSM_CSR_SIZE SZ_4K + +#define MSM_GPT_PHYS MSM_CSR_PHYS +#define MSM_GPT_BASE MSM_CSR_BASE +#define MSM_GPT_SIZE SZ_4K + +#define MSM_DMOV_BASE 0xE0002000 +#define MSM_DMOV_PHYS 0xA9700000 +#define MSM_DMOV_SIZE SZ_4K + +#define MSM_UART1_BASE 0xE0003000 +#define MSM_UART1_PHYS 0xA9A00000 +#define MSM_UART1_SIZE SZ_4K + +#define MSM_UART2_BASE 0xE0004000 +#define MSM_UART2_PHYS 0xA9B00000 +#define MSM_UART2_SIZE SZ_4K + +#define MSM_UART3_BASE 0xE0005000 +#define MSM_UART3_PHYS 0xA9C00000 +#define MSM_UART3_SIZE SZ_4K + +#define MSM_I2C_BASE 0xE0006000 +#define MSM_I2C_PHYS 0xA9900000 +#define MSM_I2C_SIZE SZ_4K + +#define MSM_GPIO1_BASE 0xE0007000 +#define MSM_GPIO1_PHYS 0xA9200000 +#define MSM_GPIO1_SIZE SZ_4K + +#define MSM_GPIO2_BASE 0xE0008000 +#define MSM_GPIO2_PHYS 0xA9300000 +#define MSM_GPIO2_SIZE SZ_4K + +#define MSM_HSUSB_BASE 0xE0009000 +#define MSM_HSUSB_PHYS 0xA0800000 +#define MSM_HSUSB_SIZE SZ_4K + +#define MSM_CLK_CTL_BASE 0xE000A000 +#define MSM_CLK_CTL_PHYS 0xA8600000 +#define MSM_CLK_CTL_SIZE SZ_4K + +#define MSM_PMDH_BASE 0xE000B000 +#define MSM_PMDH_PHYS 0xAA600000 +#define MSM_PMDH_SIZE SZ_4K + +#define MSM_EMDH_BASE 0xE000C000 +#define MSM_EMDH_PHYS 0xAA700000 +#define MSM_EMDH_SIZE SZ_4K + +#define MSM_MDP_BASE 0xE0010000 +#define MSM_MDP_PHYS 0xAA200000 +#define MSM_MDP_SIZE 0x000F0000 + +#define MSM_SHARED_RAM_BASE 0xE0100000 +#define MSM_SHARED_RAM_PHYS 0x01F00000 +#define MSM_SHARED_RAM_SIZE SZ_1M + +#endif diff --git a/include/asm-arm/arch-msm/system.h b/include/asm-arm/arch-msm/system.h new file mode 100644 index 000000000000..7c5544bdd0c7 --- /dev/null +++ b/include/asm-arm/arch-msm/system.h @@ -0,0 +1,23 @@ +/* linux/include/asm-arm/arch-msm/system.h + * + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include + +void arch_idle(void); + +static inline void arch_reset(char mode) +{ + for (;;) ; /* depends on IPC w/ other core */ +} diff --git a/include/asm-arm/arch-msm/timex.h b/include/asm-arm/arch-msm/timex.h new file mode 100644 index 000000000000..154b23fb3599 --- /dev/null +++ b/include/asm-arm/arch-msm/timex.h @@ -0,0 +1,20 @@ +/* linux/include/asm-arm/arch-msm/timex.h + * + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ASM_ARCH_MSM_TIMEX_H + +#define CLOCK_TICK_RATE 1000000 + +#endif diff --git a/include/asm-arm/arch-msm/uncompress.h b/include/asm-arm/arch-msm/uncompress.h new file mode 100644 index 000000000000..e91ed786ffec --- /dev/null +++ b/include/asm-arm/arch-msm/uncompress.h @@ -0,0 +1,36 @@ +/* linux/include/asm-arm/arch-msm/uncompress.h + * + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ASM_ARCH_MSM_UNCOMPRESS_H + +#include "hardware.h" + +static void putc(int c) +{ +} + +static inline void flush(void) +{ +} + +static inline void arch_decomp_setup(void) +{ +} + +static inline void arch_decomp_wdog(void) +{ +} + +#endif diff --git a/include/asm-arm/arch-msm/vmalloc.h b/include/asm-arm/arch-msm/vmalloc.h new file mode 100644 index 000000000000..60f8d910e825 --- /dev/null +++ b/include/asm-arm/arch-msm/vmalloc.h @@ -0,0 +1,22 @@ +/* linux/include/asm-arm/arch-msm/vmalloc.h + * + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ASM_ARCH_MSM_VMALLOC_H +#define __ASM_ARCH_MSM_VMALLOC_H + +#define VMALLOC_END (PAGE_OFFSET + 0x10000000) + +#endif + -- cgit v1.2.3-59-g8ed1b From 3e4ea3728a38b224d8b35ff8a9281407f603aa20 Mon Sep 17 00:00:00 2001 From: Arve Hjønnevåg Date: Mon, 26 Nov 2007 04:11:58 -0800 Subject: [ARM] msm: irq and timer support for ARCH_MSM7X00A - Vectored Interrupt Controller support - Timer support using the GPT and DGT timers Signed-off-by: Brian Swetland --- arch/arm/mach-msm/Makefile | 2 +- arch/arm/mach-msm/irq.c | 154 ++++++++++++++++++++++++++++++++++ arch/arm/mach-msm/timer.c | 205 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 360 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-msm/irq.c create mode 100644 arch/arm/mach-msm/timer.c diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index feb9e469df9a..a42d1a019cd2 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -1,2 +1,2 @@ -obj-y += io.o idle.o +obj-y += io.o idle.o irq.o timer.o diff --git a/arch/arm/mach-msm/irq.c b/arch/arm/mach-msm/irq.c new file mode 100644 index 000000000000..24158040b789 --- /dev/null +++ b/arch/arm/mach-msm/irq.c @@ -0,0 +1,154 @@ +/* linux/arch/arm/mach-msm/irq.c + * + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#include + +#define VIC_REG(off) (MSM_VIC_BASE + (off)) + +#define VIC_INT_SELECT0 VIC_REG(0x0000) /* 1: FIQ, 0: IRQ */ +#define VIC_INT_SELECT1 VIC_REG(0x0004) /* 1: FIQ, 0: IRQ */ +#define VIC_INT_EN0 VIC_REG(0x0010) +#define VIC_INT_EN1 VIC_REG(0x0014) +#define VIC_INT_ENCLEAR0 VIC_REG(0x0020) +#define VIC_INT_ENCLEAR1 VIC_REG(0x0024) +#define VIC_INT_ENSET0 VIC_REG(0x0030) +#define VIC_INT_ENSET1 VIC_REG(0x0034) +#define VIC_INT_TYPE0 VIC_REG(0x0040) /* 1: EDGE, 0: LEVEL */ +#define VIC_INT_TYPE1 VIC_REG(0x0044) /* 1: EDGE, 0: LEVEL */ +#define VIC_INT_POLARITY0 VIC_REG(0x0050) /* 1: NEG, 0: POS */ +#define VIC_INT_POLARITY1 VIC_REG(0x0054) /* 1: NEG, 0: POS */ +#define VIC_NO_PEND_VAL VIC_REG(0x0060) +#define VIC_INT_MASTEREN VIC_REG(0x0064) /* 1: IRQ, 2: FIQ */ +#define VIC_PROTECTION VIC_REG(0x006C) /* 1: ENABLE */ +#define VIC_CONFIG VIC_REG(0x0068) /* 1: USE ARM1136 VIC */ +#define VIC_IRQ_STATUS0 VIC_REG(0x0080) +#define VIC_IRQ_STATUS1 VIC_REG(0x0084) +#define VIC_FIQ_STATUS0 VIC_REG(0x0090) +#define VIC_FIQ_STATUS1 VIC_REG(0x0094) +#define VIC_RAW_STATUS0 VIC_REG(0x00A0) +#define VIC_RAW_STATUS1 VIC_REG(0x00A4) +#define VIC_INT_CLEAR0 VIC_REG(0x00B0) +#define VIC_INT_CLEAR1 VIC_REG(0x00B4) +#define VIC_SOFTINT0 VIC_REG(0x00C0) +#define VIC_SOFTINT1 VIC_REG(0x00C4) +#define VIC_IRQ_VEC_RD VIC_REG(0x00D0) /* pending int # */ +#define VIC_IRQ_VEC_PEND_RD VIC_REG(0x00D4) /* pending vector addr */ +#define VIC_IRQ_VEC_WR VIC_REG(0x00D8) +#define VIC_IRQ_IN_SERVICE VIC_REG(0x00E0) +#define VIC_IRQ_IN_STACK VIC_REG(0x00E4) +#define VIC_TEST_BUS_SEL VIC_REG(0x00E8) + +#define VIC_VECTPRIORITY(n) VIC_REG(0x0200+((n) * 4)) +#define VIC_VECTADDR(n) VIC_REG(0x0400+((n) * 4)) + +static void msm_irq_ack(unsigned int irq) +{ + unsigned reg = VIC_INT_CLEAR0 + ((irq & 32) ? 4 : 0); + irq = 1 << (irq & 31); + writel(irq, reg); +} + +static void msm_irq_mask(unsigned int irq) +{ + unsigned reg = VIC_INT_ENCLEAR0 + ((irq & 32) ? 4 : 0); + writel(1 << (irq & 31), reg); +} + +static void msm_irq_unmask(unsigned int irq) +{ + unsigned reg = VIC_INT_ENSET0 + ((irq & 32) ? 4 : 0); + writel(1 << (irq & 31), reg); +} + +static int msm_irq_set_wake(unsigned int irq, unsigned int on) +{ + return -EINVAL; +} + +static int msm_irq_set_type(unsigned int irq, unsigned int flow_type) +{ + unsigned treg = VIC_INT_TYPE0 + ((irq & 32) ? 4 : 0); + unsigned preg = VIC_INT_POLARITY0 + ((irq & 32) ? 4 : 0); + int b = 1 << (irq & 31); + + if (flow_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW)) + writel(readl(preg) | b, preg); + if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH)) + writel(readl(preg) & (~b), preg); + + if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) { + writel(readl(treg) | b, treg); + set_irq_handler(irq, handle_edge_irq); + } + if (flow_type & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW)) { + writel(readl(treg) & (~b), treg); + set_irq_handler(irq, handle_level_irq); + } + return 0; +} + +static struct irq_chip msm_irq_chip = { + .name = "msm", + .ack = msm_irq_ack, + .mask = msm_irq_mask, + .unmask = msm_irq_unmask, + .set_wake = msm_irq_set_wake, + .set_type = msm_irq_set_type, +}; + +void __init msm_init_irq(void) +{ + unsigned n; + + /* select level interrupts */ + writel(0, VIC_INT_TYPE0); + writel(0, VIC_INT_TYPE1); + + /* select highlevel interrupts */ + writel(0, VIC_INT_POLARITY0); + writel(0, VIC_INT_POLARITY1); + + /* select IRQ for all INTs */ + writel(0, VIC_INT_SELECT0); + writel(0, VIC_INT_SELECT1); + + /* disable all INTs */ + writel(0, VIC_INT_EN0); + writel(0, VIC_INT_EN1); + + /* don't use 1136 vic */ + writel(0, VIC_CONFIG); + + /* enable interrupt controller */ + writel(1, VIC_INT_MASTEREN); + + for (n = 0; n < NR_MSM_IRQS; n++) { + set_irq_chip(n, &msm_irq_chip); + set_irq_handler(n, handle_level_irq); + set_irq_flags(n, IRQF_VALID); + } +} diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c new file mode 100644 index 000000000000..bd4732d1ab3e --- /dev/null +++ b/arch/arm/mach-msm/timer.c @@ -0,0 +1,205 @@ +/* linux/arch/arm/mach-msm/timer.c + * + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#define MSM_DGT_BASE (MSM_GPT_BASE + 0x10) +#define MSM_DGT_SHIFT (5) + +#define TIMER_MATCH_VAL 0x0000 +#define TIMER_COUNT_VAL 0x0004 +#define TIMER_ENABLE 0x0008 +#define TIMER_ENABLE_CLR_ON_MATCH_EN 2 +#define TIMER_ENABLE_EN 1 +#define TIMER_CLEAR 0x000C + +#define CSR_PROTECTION 0x0020 +#define CSR_PROTECTION_EN 1 + +#define GPT_HZ 32768 +#define DGT_HZ 19200000 /* 19.2 MHz or 600 KHz after shift */ + +struct msm_clock { + struct clock_event_device clockevent; + struct clocksource clocksource; + struct irqaction irq; + uint32_t regbase; + uint32_t freq; + uint32_t shift; +}; + +static irqreturn_t msm_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + evt->event_handler(evt); + return IRQ_HANDLED; +} + +static cycle_t msm_gpt_read(void) +{ + return readl(MSM_GPT_BASE + TIMER_COUNT_VAL); +} + +static cycle_t msm_dgt_read(void) +{ + return readl(MSM_DGT_BASE + TIMER_COUNT_VAL) >> MSM_DGT_SHIFT; +} + +static int msm_timer_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + struct msm_clock *clock = container_of(evt, struct msm_clock, clockevent); + uint32_t now = readl(clock->regbase + TIMER_COUNT_VAL); + uint32_t alarm = now + (cycles << clock->shift); + int late; + + writel(alarm, clock->regbase + TIMER_MATCH_VAL); + now = readl(clock->regbase + TIMER_COUNT_VAL); + late = now - alarm; + if (late >= (-2 << clock->shift) && late < DGT_HZ*5) { + printk(KERN_NOTICE "msm_timer_set_next_event(%lu) clock %s, " + "alarm already expired, now %x, alarm %x, late %d\n", + cycles, clock->clockevent.name, now, alarm, late); + return -ETIME; + } + return 0; +} + +static void msm_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + struct msm_clock *clock = container_of(evt, struct msm_clock, clockevent); + switch (mode) { + case CLOCK_EVT_MODE_RESUME: + case CLOCK_EVT_MODE_PERIODIC: + break; + case CLOCK_EVT_MODE_ONESHOT: + writel(TIMER_ENABLE_EN, clock->regbase + TIMER_ENABLE); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + writel(0, clock->regbase + TIMER_ENABLE); + break; + } +} + +static struct msm_clock msm_clocks[] = { + { + .clockevent = { + .name = "gp_timer", + .features = CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .rating = 200, + .set_next_event = msm_timer_set_next_event, + .set_mode = msm_timer_set_mode, + }, + .clocksource = { + .name = "gp_timer", + .rating = 200, + .read = msm_gpt_read, + .mask = CLOCKSOURCE_MASK(32), + .shift = 24, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + }, + .irq = { + .name = "gp_timer", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_RISING, + .handler = msm_timer_interrupt, + .dev_id = &msm_clocks[0].clockevent, + .irq = INT_GP_TIMER_EXP + }, + .regbase = MSM_GPT_BASE, + .freq = GPT_HZ + }, + { + .clockevent = { + .name = "dg_timer", + .features = CLOCK_EVT_FEAT_ONESHOT, + .shift = 32 + MSM_DGT_SHIFT, + .rating = 300, + .set_next_event = msm_timer_set_next_event, + .set_mode = msm_timer_set_mode, + }, + .clocksource = { + .name = "dg_timer", + .rating = 300, + .read = msm_dgt_read, + .mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)), + .shift = 24 - MSM_DGT_SHIFT, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + }, + .irq = { + .name = "dg_timer", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_RISING, + .handler = msm_timer_interrupt, + .dev_id = &msm_clocks[1].clockevent, + .irq = INT_DEBUG_TIMER_EXP + }, + .regbase = MSM_DGT_BASE, + .freq = DGT_HZ >> MSM_DGT_SHIFT, + .shift = MSM_DGT_SHIFT + } +}; + +static void __init msm_timer_init(void) +{ + int i; + int res; + + for (i = 0; i < ARRAY_SIZE(msm_clocks); i++) { + struct msm_clock *clock = &msm_clocks[i]; + struct clock_event_device *ce = &clock->clockevent; + struct clocksource *cs = &clock->clocksource; + writel(0, clock->regbase + TIMER_ENABLE); + writel(0, clock->regbase + TIMER_CLEAR); + writel(~0, clock->regbase + TIMER_MATCH_VAL); + + ce->mult = div_sc(clock->freq, NSEC_PER_SEC, ce->shift); + /* allow at least 10 seconds to notice that the timer wrapped */ + ce->max_delta_ns = + clockevent_delta2ns(0xf0000000 >> clock->shift, ce); + /* 4 gets rounded down to 3 */ + ce->min_delta_ns = clockevent_delta2ns(4, ce); + ce->cpumask = cpumask_of_cpu(0); + + cs->mult = clocksource_hz2mult(clock->freq, cs->shift); + res = clocksource_register(cs); + if (res) + printk(KERN_ERR "msm_timer_init: clocksource_register " + "failed for %s\n", cs->name); + + res = setup_irq(clock->irq.irq, &clock->irq); + if (res) + printk(KERN_ERR "msm_timer_init: setup_irq " + "failed for %s\n", cs->name); + + clockevents_register_device(ce); + } +} + +struct sys_timer msm_timer = { + .init = msm_timer_init +}; -- cgit v1.2.3-59-g8ed1b From 9e73c84c89b7c91ad5d6a141c58efbbe139f6b6c Mon Sep 17 00:00:00 2001 From: Brian Swetland Date: Mon, 26 Nov 2007 04:12:13 -0800 Subject: [ARM] msm: board file for MACH_HALIBUT (QCT MSM7200A) Add support for the Qualcomm MSM7200A eval board. Common devices are defined in common.c, to avoid excessive cut'n'pasting them into other board files. Signed-off-by: Brian Swetland --- arch/arm/Kconfig | 2 + arch/arm/configs/msm_defconfig | 895 ++++++++++++++++++++++++++++++++++++++ arch/arm/mach-msm/Kconfig | 18 + arch/arm/mach-msm/Makefile | 5 + arch/arm/mach-msm/board-halibut.c | 114 +++++ arch/arm/mach-msm/common.c | 116 +++++ 6 files changed, 1150 insertions(+) create mode 100644 arch/arm/configs/msm_defconfig create mode 100644 arch/arm/mach-msm/Kconfig create mode 100644 arch/arm/mach-msm/board-halibut.c create mode 100644 arch/arm/mach-msm/common.c diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 89c3811132c2..ec294995e63c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -488,6 +488,8 @@ source "arch/arm/mach-davinci/Kconfig" source "arch/arm/mach-ks8695/Kconfig" +source "arch/arm/mach-msm/Kconfig" + # Definitions to make life easier config ARCH_ACORN bool diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig new file mode 100644 index 000000000000..ae4c5e62086a --- /dev/null +++ b/arch/arm/configs/msm_defconfig @@ -0,0 +1,895 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23 +# Wed Nov 7 01:36:45 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_GPIOS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +# CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_PANIC_TIMEOUT=0 +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_GOLDFISH is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +CONFIG_ARCH_MSM7X00A=y + +# +# Boot options +# + +# +# Power management +# + +# +# MSM7200 Board Type +# +CONFIG_MACH_HALIBUT=y +CONFIG_SERIAL_MSM=y +CONFIG_SERIAL_MSM_CONSOLE=y +# CONFIG_SERIAL_MSM_NOINIT is not set +CONFIG_MSM_SMD=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_V6=y +# CONFIG_CPU_32v6K is not set +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=ttyMSM,115200n8" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_SUSPEND_UP_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set +CONFIG_MTD_MSM_NAND=y + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_GOLDFISH_NAND is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=y +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=y +CONFIG_PPP_BSDCOMP=y +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +CONFIG_MSM_RMNET=y +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GOLDFISH_EVENTS is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_MEP is not set +CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI=y +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_UINPUT is not set +CONFIG_INPUT_GPIO=y + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DCC_TTY=y +# CONFIG_GOLDFISH_TTY is not set +CONFIG_BINDER=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +CONFIG_I2C_MSM=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +CONFIG_SENSORS_PCA9633=y +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +CONFIG_SENSORS_AKM8976=y +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_HWMON is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_LOW_MEMORY_KILLER=y + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_MSM=y +# CONFIG_FB_GOLDFISH is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_LOGO is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# USB Function Support +# +CONFIG_USB_FUNCTION=y +CONFIG_USB_FUNCTION_MSM_HSUSB=y +# CONFIG_USB_FUNCTION_NULL is not set +# CONFIG_USB_FUNCTION_ZERO is not set +# CONFIG_USB_FUNCTION_LOOPBACK is not set +CONFIG_USB_FUNCTION_ADB=y +# CONFIG_MMC is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Android +# +# CONFIG_ANDROID_GADGET is not set +# CONFIG_ANDROID_RAM_CONSOLE is not set +CONFIG_ANDROID_LOGGER=y +CONFIG_ANDROID_VIBRATOR=y + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_YAFFS_FS=y +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_9BYTE_TAGS is not set +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +# CONFIG_FORCED_INLINING is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig new file mode 100644 index 000000000000..3553babbbf05 --- /dev/null +++ b/arch/arm/mach-msm/Kconfig @@ -0,0 +1,18 @@ +if ARCH_MSM7X00A + +comment "MSM7X00A Board Type" + depends on ARCH_MSM7X00A + +config MACH_HALIBUT + depends on ARCH_MSM7X00A + default y + bool "Halibut Board (QCT SURF7200A)" + help + Support for the Qualcomm SURF7200A eval board. + +config MSM7X00A_IDLE + depends on ARCH_MSM7X00A + default y + bool "Idle Support for MSM7X00A" + +endif diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index a42d1a019cd2..fcca853d6485 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -1,2 +1,7 @@ obj-y += io.o idle.o irq.o timer.o +# Common code for board init +obj-y += common.o + +obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o + diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c new file mode 100644 index 000000000000..86dfb2b5261c --- /dev/null +++ b/arch/arm/mach-msm/board-halibut.c @@ -0,0 +1,114 @@ +/* linux/arch/arm/mach-msm/board-halibut.c + * + * Copyright (C) 2007 Google, Inc. + * Author: Brian Swetland + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include +#include + +static struct resource smc91x_resources[] = { + [0] = { + .start = 0x9C004300, + .end = 0x9C004400, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MSM_GPIO_TO_INT(49), + .end = MSM_GPIO_TO_INT(49), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static void mddi0_panel_power(int on) +{ +} + +static struct msm_mddi_platform_data msm_mddi0_pdata = { + .panel_power = mddi0_panel_power, + .has_vsync_irq = 0, +}; + +static struct platform_device msm_mddi0_device = { + .name = "msm_mddi", + .id = 0, + .dev = { + .platform_data = &msm_mddi0_pdata + }, +}; + +static struct platform_device msm_serial0_device = { + .name = "msm_serial", + .id = 0, +}; + +static struct platform_device *devices[] __initdata = { + &msm_serial0_device, + &msm_mddi0_device, + &smc91x_device, +}; + +extern struct sys_timer msm_timer; + +static void __init halibut_init_irq(void) +{ + msm_init_irq(); +} + +static void __init halibut_init(void) +{ + platform_add_devices(devices, ARRAY_SIZE(devices)); + msm_add_devices(); +} + +static void __init halibut_map_io(void) +{ + msm_map_common_io(); +} + +MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)") + +/* UART for LL DEBUG */ + .phys_io = MSM_UART1_PHYS, + .io_pg_offst = ((MSM_UART1_BASE) >> 18) & 0xfffc, + + .boot_params = 0x10000100, + .map_io = halibut_map_io, + .init_irq = halibut_init_irq, + .init_machine = halibut_init, + .timer = &msm_timer, +MACHINE_END diff --git a/arch/arm/mach-msm/common.c b/arch/arm/mach-msm/common.c new file mode 100644 index 000000000000..3f5d3362f887 --- /dev/null +++ b/arch/arm/mach-msm/common.c @@ -0,0 +1,116 @@ +/* linux/arch/arm/mach-msm/common.c + * + * Common setup code for MSM7K Boards + * + * Copyright (C) 2007 Google, Inc. + * Author: Brian Swetland + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include + +#include +#include + +#include + +#include +#include + +#include + +#include + +struct flash_platform_data msm_nand_data = { + .parts = 0, + .nr_parts = 0, +}; + +static struct resource msm_nand_resources[] = { + [0] = { + .start = 7, + .end = 7, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device msm_nand_device = { + .name = "msm_nand", + .id = -1, + .num_resources = ARRAY_SIZE(msm_nand_resources), + .resource = msm_nand_resources, + .dev = { + .platform_data = &msm_nand_data, + }, +}; + +static struct platform_device msm_smd_device = { + .name = "msm_smd", + .id = -1, +}; + +static struct resource msm_i2c_resources[] = { + { + .start = MSM_I2C_BASE, + .end = MSM_I2C_BASE + MSM_I2C_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_PWB_I2C, + .end = INT_PWB_I2C, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device msm_i2c_device = { + .name = "msm_i2c", + .id = 0, + .num_resources = ARRAY_SIZE(msm_i2c_resources), + .resource = msm_i2c_resources, +}; + +static struct resource usb_resources[] = { + { + .start = MSM_HSUSB_PHYS, + .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_USB_HS, + .end = INT_USB_HS, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device msm_hsusb_device = { + .name = "msm_hsusb", + .id = -1, + .num_resources = ARRAY_SIZE(usb_resources), + .resource = usb_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, +}; + +static struct platform_device *devices[] __initdata = { + &msm_nand_device, + &msm_smd_device, + &msm_i2c_device, + &msm_hsusb_device, +}; + +void __init msm_add_devices(void) +{ + platform_add_devices(devices, ARRAY_SIZE(devices)); +} -- cgit v1.2.3-59-g8ed1b From bfe645adf1a79b873b528556523abb46f281a5dc Mon Sep 17 00:00:00 2001 From: Arve Hjønnevåg Date: Mon, 26 Nov 2007 04:12:29 -0800 Subject: [ARM] msm: dma support for MSM7X00A Signed-off-by: Brian Swetland --- arch/arm/mach-msm/Makefile | 2 +- arch/arm/mach-msm/dma.c | 214 +++++++++++++++++++++++++++++++++++++++++ include/asm-arm/arch-msm/dma.h | 150 +++++++++++++++++++++++++++++ 3 files changed, 365 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-msm/dma.c diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index fcca853d6485..d12f23655850 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -1,4 +1,4 @@ -obj-y += io.o idle.o irq.o timer.o +obj-y += io.o idle.o irq.o timer.o dma.o # Common code for board init obj-y += common.o diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c new file mode 100644 index 000000000000..8b0f339b3274 --- /dev/null +++ b/arch/arm/mach-msm/dma.c @@ -0,0 +1,214 @@ +/* linux/arch/arm/mach-msm/dma.c + * + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include + +#define MSM_DMOV_CHANNEL_COUNT 16 + +enum { + MSM_DMOV_PRINT_ERRORS = 1, + MSM_DMOV_PRINT_IO = 2, + MSM_DMOV_PRINT_FLOW = 4 +}; + +static DEFINE_SPINLOCK(msm_dmov_lock); +static struct msm_dmov_cmd active_command; +static struct list_head ready_commands[MSM_DMOV_CHANNEL_COUNT]; +static struct list_head active_commands[MSM_DMOV_CHANNEL_COUNT]; +unsigned int msm_dmov_print_mask = MSM_DMOV_PRINT_ERRORS; + +#define MSM_DMOV_DPRINTF(mask, format, args...) \ + do { \ + if ((mask) & msm_dmov_print_mask) \ + printk(KERN_ERR format, args); \ + } while (0) +#define PRINT_ERROR(format, args...) \ + MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_ERRORS, format, args); +#define PRINT_IO(format, args...) \ + MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_IO, format, args); +#define PRINT_FLOW(format, args...) \ + MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_FLOW, format, args); + +void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd) +{ + unsigned long irq_flags; + unsigned int status; + + spin_lock_irqsave(&msm_dmov_lock, irq_flags); + status = readl(DMOV_STATUS(id)); + if (list_empty(&ready_commands[id]) && + (status & DMOV_STATUS_CMD_PTR_RDY)) { +#if 0 + if (list_empty(&active_commands[id])) { + PRINT_FLOW("msm_dmov_enqueue_cmd(%d), enable interrupt\n", id); + writel(DMOV_CONFIG_IRQ_EN, DMOV_CONFIG(id)); + } +#endif + PRINT_IO("msm_dmov_enqueue_cmd(%d), start command, status %x\n", id, status); + list_add_tail(&cmd->list, &active_commands[id]); + writel(cmd->cmdptr, DMOV_CMD_PTR(id)); + } else { + if (list_empty(&active_commands[id])) + PRINT_ERROR("msm_dmov_enqueue_cmd(%d), error datamover stalled, status %x\n", id, status); + + PRINT_IO("msm_dmov_enqueue_cmd(%d), enqueue command, status %x\n", id, status); + list_add_tail(&cmd->list, &ready_commands[id]); + } + spin_unlock_irqrestore(&msm_dmov_lock, irq_flags); +} + +struct msm_dmov_exec_cmdptr_cmd { + struct msm_dmov_cmd dmov_cmd; + struct completion complete; + unsigned id; + unsigned int result; + unsigned int flush[6]; +}; + +static void dmov_exec_cmdptr_complete_func(struct msm_dmov_cmd *_cmd, unsigned int result) +{ + struct msm_dmov_exec_cmdptr_cmd *cmd = container_of(_cmd, struct msm_dmov_exec_cmdptr_cmd, dmov_cmd); + cmd->result = result; + if (result != 0x80000002) { + cmd->flush[0] = readl(DMOV_FLUSH0(cmd->id)); + cmd->flush[1] = readl(DMOV_FLUSH1(cmd->id)); + cmd->flush[2] = readl(DMOV_FLUSH2(cmd->id)); + cmd->flush[3] = readl(DMOV_FLUSH3(cmd->id)); + cmd->flush[4] = readl(DMOV_FLUSH4(cmd->id)); + cmd->flush[5] = readl(DMOV_FLUSH5(cmd->id)); + } + complete(&cmd->complete); +} + +int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr) +{ + struct msm_dmov_exec_cmdptr_cmd cmd; + + PRINT_FLOW("dmov_exec_cmdptr(%d, %x)\n", id, cmdptr); + + cmd.dmov_cmd.cmdptr = cmdptr; + cmd.dmov_cmd.complete_func = dmov_exec_cmdptr_complete_func; + cmd.id = id; + init_completion(&cmd.complete); + + msm_dmov_enqueue_cmd(id, &cmd.dmov_cmd); + wait_for_completion(&cmd.complete); + + if (cmd.result != 0x80000002) { + PRINT_ERROR("dmov_exec_cmdptr(%d): ERROR, result: %x\n", id, cmd.result); + PRINT_ERROR("dmov_exec_cmdptr(%d): flush: %x %x %x %x\n", + id, cmd.flush[0], cmd.flush[1], cmd.flush[2], cmd.flush[3]); + return -EIO; + } + PRINT_FLOW("dmov_exec_cmdptr(%d, %x) done\n", id, cmdptr); + return 0; +} + + +static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id) +{ + unsigned int int_status, mask, id; + unsigned long irq_flags; + unsigned int ch_status; + unsigned int ch_result; + struct msm_dmov_cmd *cmd; + + spin_lock_irqsave(&msm_dmov_lock, irq_flags); + + int_status = readl(DMOV_ISR); /* read and clear interrupt */ + PRINT_FLOW("msm_datamover_irq_handler: DMOV_ISR %x\n", int_status); + + while (int_status) { + mask = int_status & -int_status; + id = fls(mask) - 1; + PRINT_FLOW("msm_datamover_irq_handler %08x %08x id %d\n", int_status, mask, id); + int_status &= ~mask; + ch_status = readl(DMOV_STATUS(id)); + if (!(ch_status & DMOV_STATUS_RSLT_VALID)) { + PRINT_FLOW("msm_datamover_irq_handler id %d, result not valid %x\n", id, ch_status); + continue; + } + do { + ch_result = readl(DMOV_RSLT(id)); + if (list_empty(&active_commands[id])) { + PRINT_ERROR("msm_datamover_irq_handler id %d, got result " + "with no active command, status %x, result %x\n", + id, ch_status, ch_result); + cmd = NULL; + } else + cmd = list_entry(active_commands[id].next, typeof(*cmd), list); + PRINT_FLOW("msm_datamover_irq_handler id %d, status %x, result %x\n", id, ch_status, ch_result); + if (ch_result & DMOV_RSLT_DONE) { + PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", + id, ch_status); + PRINT_IO("msm_datamover_irq_handler id %d, got result " + "for %p, result %x\n", id, cmd, ch_result); + if (cmd) { + list_del(&cmd->list); + cmd->complete_func(cmd, ch_result); + } + } + if (ch_result & DMOV_RSLT_FLUSH) { + unsigned int flush0 = readl(DMOV_FLUSH0(id)); + PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status); + PRINT_FLOW("msm_datamover_irq_handler id %d, flush, result %x, flush0 %x\n", id, ch_result, flush0); + if (cmd) { + list_del(&cmd->list); + cmd->complete_func(cmd, ch_result); + } + } + if (ch_result & DMOV_RSLT_ERROR) { + unsigned int flush0 = readl(DMOV_FLUSH0(id)); + PRINT_ERROR("msm_datamover_irq_handler id %d, status %x\n", id, ch_status); + PRINT_ERROR("msm_datamover_irq_handler id %d, error, result %x, flush0 %x\n", id, ch_result, flush0); + if (cmd) { + list_del(&cmd->list); + cmd->complete_func(cmd, ch_result); + } + /* this does not seem to work, once we get an error */ + /* the datamover will no longer accept commands */ + writel(0, DMOV_FLUSH0(id)); + } + ch_status = readl(DMOV_STATUS(id)); + PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status); + if ((ch_status & DMOV_STATUS_CMD_PTR_RDY) && !list_empty(&ready_commands[id])) { + cmd = list_entry(ready_commands[id].next, typeof(*cmd), list); + list_del(&cmd->list); + list_add_tail(&cmd->list, &active_commands[id]); + PRINT_FLOW("msm_datamover_irq_handler id %d, start command\n", id); + writel(cmd->cmdptr, DMOV_CMD_PTR(id)); + } + } while (ch_status & DMOV_STATUS_RSLT_VALID); + PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status); + } + spin_unlock_irqrestore(&msm_dmov_lock, irq_flags); + return IRQ_HANDLED; +} + +static int __init msm_init_datamover(void) +{ + int i; + for (i = 0; i < MSM_DMOV_CHANNEL_COUNT; i++) { + INIT_LIST_HEAD(&ready_commands[i]); + INIT_LIST_HEAD(&active_commands[i]); + writel(DMOV_CONFIG_IRQ_EN | DMOV_CONFIG_FORCE_TOP_PTR_RSLT | DMOV_CONFIG_FORCE_FLUSH_RSLT, DMOV_CONFIG(i)); + } + return request_irq(INT_ADM_AARM, msm_datamover_irq_handler, 0, "msmdatamover", NULL); +} + +arch_initcall(msm_init_datamover); + diff --git a/include/asm-arm/arch-msm/dma.h b/include/asm-arm/arch-msm/dma.h index 8b137891791f..e4b565b27b35 100644 --- a/include/asm-arm/arch-msm/dma.h +++ b/include/asm-arm/arch-msm/dma.h @@ -1 +1,151 @@ +/* linux/include/asm-arm/arch-msm/dma.h + * + * Copyright (C) 2007 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#ifndef __ASM_ARCH_MSM_DMA_H + +#include +#include + +struct msm_dmov_cmd { + struct list_head list; + unsigned int cmdptr; + void (*complete_func)(struct msm_dmov_cmd *cmd, unsigned int result); +/* void (*user_result_func)(struct msm_dmov_cmd *cmd); */ +}; + +void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd); +void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd); +int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr); +/* int msm_dmov_exec_cmd_etc(unsigned id, unsigned int cmdptr, int timeout, int interruptible); */ + + + +#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2)) +#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2)) +#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2)) +#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2)) + +/* only security domain 3 is available to the ARM11 + * SD0 -> mARM trusted, SD1 -> mARM nontrusted, SD2 -> aDSP, SD3 -> aARM + */ + +#define DMOV_CMD_PTR(ch) DMOV_SD3(0x000, ch) +#define DMOV_CMD_LIST (0 << 29) /* does not work */ +#define DMOV_CMD_PTR_LIST (1 << 29) /* works */ +#define DMOV_CMD_INPUT_CFG (2 << 29) /* untested */ +#define DMOV_CMD_OUTPUT_CFG (3 << 29) /* untested */ +#define DMOV_CMD_ADDR(addr) ((addr) >> 3) + +#define DMOV_RSLT(ch) DMOV_SD3(0x040, ch) +#define DMOV_RSLT_VALID (1 << 31) /* 0 == host has empties result fifo */ +#define DMOV_RSLT_ERROR (1 << 3) +#define DMOV_RSLT_FLUSH (1 << 2) +#define DMOV_RSLT_DONE (1 << 1) /* top pointer done */ +#define DMOV_RSLT_USER (1 << 0) /* command with FR force result */ + +#define DMOV_FLUSH0(ch) DMOV_SD3(0x080, ch) +#define DMOV_FLUSH1(ch) DMOV_SD3(0x0C0, ch) +#define DMOV_FLUSH2(ch) DMOV_SD3(0x100, ch) +#define DMOV_FLUSH3(ch) DMOV_SD3(0x140, ch) +#define DMOV_FLUSH4(ch) DMOV_SD3(0x180, ch) +#define DMOV_FLUSH5(ch) DMOV_SD3(0x1C0, ch) + +#define DMOV_STATUS(ch) DMOV_SD3(0x200, ch) +#define DMOV_STATUS_RSLT_COUNT(n) (((n) >> 29)) +#define DMOV_STATUS_CMD_COUNT(n) (((n) >> 27) & 3) +#define DMOV_STATUS_RSLT_VALID (1 << 1) +#define DMOV_STATUS_CMD_PTR_RDY (1 << 0) + +#define DMOV_ISR DMOV_SD3(0x380, 0) + +#define DMOV_CONFIG(ch) DMOV_SD3(0x300, ch) +#define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2) +#define DMOV_CONFIG_FORCE_FLUSH_RSLT (1 << 1) +#define DMOV_CONFIG_IRQ_EN (1 << 0) + +/* channel assignments */ + +#define DMOV_NAND_CHAN 7 +#define DMOV_NAND_CRCI_CMD 5 +#define DMOV_NAND_CRCI_DATA 4 + +#define DMOV_SDC1_CHAN 8 +#define DMOV_SDC1_CRCI 6 + +#define DMOV_SDC2_CHAN 8 +#define DMOV_SDC2_CRCI 7 + +#define DMOV_TSIF_CHAN 10 +#define DMOV_TSIF_CRCI 10 + +#define DMOV_USB_CHAN 11 + +/* no client rate control ifc (eg, ram) */ +#define DMOV_NONE_CRCI 0 + + +/* If the CMD_PTR register has CMD_PTR_LIST selected, the data mover + * is going to walk a list of 32bit pointers as described below. Each + * pointer points to a *array* of dmov_s, etc structs. The last pointer + * in the list is marked with CMD_PTR_LP. The last struct in each array + * is marked with CMD_LC (see below). + */ +#define CMD_PTR_ADDR(addr) ((addr) >> 3) +#define CMD_PTR_LP (1 << 31) /* last pointer */ +#define CMD_PTR_PT (3 << 29) /* ? */ + +/* Single Item Mode */ +typedef struct { + unsigned cmd; + unsigned src; + unsigned dst; + unsigned len; +} dmov_s; + +/* Scatter/Gather Mode */ +typedef struct { + unsigned cmd; + unsigned src_dscr; + unsigned dst_dscr; + unsigned _reserved; +} dmov_sg; + +/* bits for the cmd field of the above structures */ + +#define CMD_LC (1 << 31) /* last command */ +#define CMD_FR (1 << 22) /* force result -- does not work? */ +#define CMD_OCU (1 << 21) /* other channel unblock */ +#define CMD_OCB (1 << 20) /* other channel block */ +#define CMD_TCB (1 << 19) /* ? */ +#define CMD_DAH (1 << 18) /* destination address hold -- does not work?*/ +#define CMD_SAH (1 << 17) /* source address hold -- does not work? */ + +#define CMD_MODE_SINGLE (0 << 0) /* dmov_s structure used */ +#define CMD_MODE_SG (1 << 0) /* untested */ +#define CMD_MODE_IND_SG (2 << 0) /* untested */ +#define CMD_MODE_BOX (3 << 0) /* untested */ + +#define CMD_DST_SWAP_BYTES (1 << 14) /* exchange each byte n with byte n+1 */ +#define CMD_DST_SWAP_SHORTS (1 << 15) /* exchange each short n with short n+1 */ +#define CMD_DST_SWAP_WORDS (1 << 16) /* exchange each word n with word n+1 */ + +#define CMD_SRC_SWAP_BYTES (1 << 11) /* exchange each byte n with byte n+1 */ +#define CMD_SRC_SWAP_SHORTS (1 << 12) /* exchange each short n with short n+1 */ +#define CMD_SRC_SWAP_WORDS (1 << 13) /* exchange each word n with word n+1 */ + +#define CMD_DST_CRCI(n) (((n) & 15) << 7) +#define CMD_SRC_CRCI(n) (((n) & 15) << 3) + +#endif -- cgit v1.2.3-59-g8ed1b From d142b6e77d394a4fcc0a42381b03852bd9c4e263 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 12 Nov 2007 21:55:12 +0000 Subject: [ARM] sa1100: add clock source support Add generic clock source support for SA11x0 platforms. Signed-off-by: Russell King --- arch/arm/Kconfig | 1 + arch/arm/mach-sa1100/time.c | 38 ++++++++++++++++++++------------------ 2 files changed, 21 insertions(+), 18 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a04f507e7f2c..742527957048 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -366,6 +366,7 @@ config ARCH_SA1100 select ARCH_DISCONTIGMEM_ENABLE select ARCH_MTD_XIP select GENERIC_GPIO + select GENERIC_TIME help Support for StrongARM 11x0 based boards. diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index fdf7b016e7ad..72984354a247 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -35,23 +36,6 @@ static int sa1100_set_rtc(void) return 0; } -/* IRQs are disabled before entering here from do_gettimeofday() */ -static unsigned long sa1100_gettimeoffset (void) -{ - unsigned long ticks_to_match, elapsed, usec; - - /* Get ticks before next timer match */ - ticks_to_match = OSMR0 - OSCR; - - /* We need elapsed ticks since last match */ - elapsed = LATCH - ticks_to_match; - - /* Now convert them to usec */ - usec = (unsigned long)(elapsed * (tick_nsec / 1000))/LATCH; - - return usec; -} - #ifdef CONFIG_NO_IDLE_HZ static unsigned long initial_match; static int match_posponed; @@ -96,6 +80,20 @@ static struct irqaction sa1100_timer_irq = { .handler = sa1100_timer_interrupt, }; +static cycle_t sa1100_read_oscr(void) +{ + return OSCR; +} + +static struct clocksource cksrc_sa1100_oscr = { + .name = "oscr", + .rating = 200, + .read = sa1100_read_oscr, + .mask = CLOCKSOURCE_MASK(32), + .shift = 20, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + static void __init sa1100_timer_init(void) { unsigned long flags; @@ -109,6 +107,11 @@ static void __init sa1100_timer_init(void) OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */ OSMR0 = OSCR + LATCH; /* set initial match */ local_irq_restore(flags); + + cksrc_sa1100_oscr.mult = + clocksource_hz2mult(CLOCK_TICK_RATE, cksrc_sa1100_oscr.shift); + + clocksource_register(&cksrc_sa1100_oscr); } #ifdef CONFIG_NO_IDLE_HZ @@ -182,7 +185,6 @@ struct sys_timer sa1100_timer = { .init = sa1100_timer_init, .suspend = sa1100_timer_suspend, .resume = sa1100_timer_resume, - .offset = sa1100_gettimeoffset, #ifdef CONFIG_NO_IDLE_HZ .dyn_tick = &sa1100_dyn_tick, #endif -- cgit v1.2.3-59-g8ed1b From c98929c07a01c9ec2e1e5253456acc7168da8b66 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 22 Nov 2007 18:32:01 +0100 Subject: [ARM] 4582/2: Add support for the common VFP subarchitecture This patch allows the VFP support code to run correctly on CPUs compatible with the common VFP subarchitecture specification (Appendix B in the ARM ARM v7-A and v7-R edition). It implements support for VFP subarchitecture 2 while being backwards compatible with subarchitecture 1. On VFP subarchitecture 1, the arithmetic exceptions are asynchronous (or imprecise as described in the old ARM ARM) unless the FPSCR.IXE bit is 1. The exceptional instructions can be read from FPINST and FPINST2 registers. With VFP subarchitecture 2, the arithmetic exceptions can also be synchronous and marked by the FPEXC.DEX bit (the FPEXC.EX bit is cleared). CPUs implementing the synchronous arithmetic exceptions don't have the FPINST and FPINST2 registers and accessing them would trigger and undefined exception. Note that FPEXC.EX bit has an additional meaning on subarchitecture 1 - if it isn't set, there is no additional information in FPINST and FPINST2 that needs to be saved at context switch or when lazy-loading the VFP state of a different thread. The patch also removes the clearing of the cumulative exception flags in FPSCR when additional exceptions were raised. It is up to the user application to clear these bits. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/vfp/vfphw.S | 38 +++++++++---------- arch/arm/vfp/vfpmodule.c | 98 +++++++++++++++++++++++++++--------------------- include/asm-arm/vfp.h | 30 +++++++-------- 3 files changed, 89 insertions(+), 77 deletions(-) diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index 0ac022f800a1..53d9f8e8fac3 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -100,10 +100,10 @@ vfp_support_entry: cmp r4, #0 beq no_old_VFP_process VFPFMRX r5, FPSCR @ current status - VFPFMRX r6, FPINST @ FPINST (always there, rev0 onwards) - tst r1, #FPEXC_FPV2 @ is there an FPINST2 to read? - VFPFMRX r8, FPINST2, NE @ FPINST2 if needed - avoids reading - @ nonexistant reg on rev0 + tst r1, #FPEXC_EX @ is there additional state to save? + VFPFMRX r6, FPINST, NE @ FPINST (only if FPEXC.EX is set) + tstne r1, #FPEXC_FP2V @ is there an FPINST2 to read? + VFPFMRX r8, FPINST2, NE @ FPINST2 if needed (and present) VFPFSTMIA r4 @ save the working registers stmia r4, {r1, r5, r6, r8} @ save FPEXC, FPSCR, FPINST, FPINST2 @ and point r4 at the word at the @@ -117,10 +117,10 @@ no_old_VFP_process: VFPFLDMIA r10 @ reload the working registers while @ FPEXC is in a safe state ldmia r10, {r1, r5, r6, r8} @ load FPEXC, FPSCR, FPINST, FPINST2 - tst r1, #FPEXC_FPV2 @ is there an FPINST2 to write? - VFPFMXR FPINST2, r8, NE @ FPINST2 if needed - avoids writing - @ nonexistant reg on rev0 - VFPFMXR FPINST, r6 + tst r1, #FPEXC_EX @ is there additional state to restore? + VFPFMXR FPINST, r6, NE @ restore FPINST (only if FPEXC.EX is set) + tstne r1, #FPEXC_FP2V @ is there an FPINST2 to write? + VFPFMXR FPINST2, r8, NE @ FPINST2 if needed (and present) VFPFMXR FPSCR, r5 @ restore status check_for_exception: @@ -136,10 +136,14 @@ check_for_exception: look_for_VFP_exceptions: - tst r1, #FPEXC_EX + @ Check for synchronous or asynchronous exception + tst r1, #FPEXC_EX | FPEXC_DEX bne process_exception + @ On some implementations of the VFP subarch 1, setting FPSCR.IXE + @ causes all the CDP instructions to be bounced synchronously without + @ setting the FPEXC.EX bit VFPFMRX r5, FPSCR - tst r5, #FPSCR_IXE @ IXE doesn't set FPEXC_EX ! + tst r5, #FPSCR_IXE bne process_exception @ Fall into hand on to next handler - appropriate coproc instr @@ -150,10 +154,6 @@ look_for_VFP_exceptions: process_exception: DBGSTR "bounce" - sub r2, r2, #4 - str r2, [sp, #S_PC] @ retry the instruction on exit from - @ the imprecise exception handling in - @ the support code mov r2, sp @ nothing stacked - regdump is at TOS mov lr, r9 @ setup for a return to the user code. @@ -161,7 +161,7 @@ process_exception: @ r0 holds the trigger instruction @ r1 holds the FPEXC value @ r2 pointer to register dump - b VFP9_bounce @ we have handled this - the support + b VFP_bounce @ we have handled this - the support @ code will raise an exception if @ required. If not, the user code will @ retry the faulted instruction @@ -175,10 +175,10 @@ vfp_save_state: @ r1 - FPEXC DBGSTR1 "save VFP state %p", r0 VFPFMRX r2, FPSCR @ current status - VFPFMRX r3, FPINST @ FPINST (always there, rev0 onwards) - tst r1, #FPEXC_FPV2 @ is there an FPINST2 to read? - VFPFMRX r12, FPINST2, NE @ FPINST2 if needed - avoids reading - @ nonexistant reg on rev0 + tst r1, #FPEXC_EX @ is there additional state to save? + VFPFMRX r3, FPINST, NE @ FPINST (only if FPEXC.EX is set) + tstne r1, #FPEXC_FP2V @ is there an FPINST2 to read? + VFPFMRX r12, FPINST2, NE @ FPINST2 if needed (and present) VFPFSTMIA r0 @ save the working registers stmia r0, {r1, r2, r3, r12} @ save FPEXC, FPSCR, FPINST, FPINST2 mov pc, lr diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index b4e210df92f2..32455c633f1c 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -125,13 +125,13 @@ void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs) send_sig_info(SIGFPE, &info, current); } -static void vfp_panic(char *reason) +static void vfp_panic(char *reason, u32 inst) { int i; printk(KERN_ERR "VFP: Error: %s\n", reason); printk(KERN_ERR "VFP: EXC 0x%08x SCR 0x%08x INST 0x%08x\n", - fmrx(FPEXC), fmrx(FPSCR), fmrx(FPINST)); + fmrx(FPEXC), fmrx(FPSCR), inst); for (i = 0; i < 32; i += 2) printk(KERN_ERR "VFP: s%2u: 0x%08x s%2u: 0x%08x\n", i, vfp_get_float(i), i+1, vfp_get_float(i+1)); @@ -147,19 +147,16 @@ static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_ pr_debug("VFP: raising exceptions %08x\n", exceptions); if (exceptions == VFP_EXCEPTION_ERROR) { - vfp_panic("unhandled bounce"); + vfp_panic("unhandled bounce", inst); vfp_raise_sigfpe(0, regs); return; } /* - * If any of the status flags are set, update the FPSCR. + * Update the FPSCR with the additional exception flags. * Comparison instructions always return at least one of * these flags set. */ - if (exceptions & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V)) - fpscr &= ~(FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V); - fpscr |= exceptions; fmxr(FPSCR, fpscr); @@ -220,35 +217,64 @@ static u32 vfp_emulate_instruction(u32 inst, u32 fpscr, struct pt_regs *regs) /* * Package up a bounce condition. */ -void VFP9_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) +void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) { - u32 fpscr, orig_fpscr, exceptions, inst; + u32 fpscr, orig_fpscr, fpsid, exceptions; pr_debug("VFP: bounce: trigger %08x fpexc %08x\n", trigger, fpexc); /* - * Enable access to the VFP so we can handle the bounce. + * At this point, FPEXC can have the following configuration: + * + * EX DEX IXE + * 0 1 x - synchronous exception + * 1 x 0 - asynchronous exception + * 1 x 1 - sychronous on VFP subarch 1 and asynchronous on later + * 0 0 1 - synchronous on VFP9 (non-standard subarch 1 + * implementation), undefined otherwise + * + * Clear various bits and enable access to the VFP so we can + * handle the bounce. */ - fmxr(FPEXC, fpexc & ~(FPEXC_EX|FPEXC_FPV2|FPEXC_INV|FPEXC_UFC|FPEXC_OFC|FPEXC_IOC)); + fmxr(FPEXC, fpexc & ~(FPEXC_EX|FPEXC_DEX|FPEXC_FP2V|FPEXC_VV|FPEXC_TRAP_MASK)); + fpsid = fmrx(FPSID); orig_fpscr = fpscr = fmrx(FPSCR); /* - * If we are running with inexact exceptions enabled, we need to - * emulate the trigger instruction. Note that as we're emulating - * the trigger instruction, we need to increment PC. + * Check for the special VFP subarch 1 and FPSCR.IXE bit case */ - if (fpscr & FPSCR_IXE) { - regs->ARM_pc += 4; + if ((fpsid & FPSID_ARCH_MASK) == (1 << FPSID_ARCH_BIT) + && (fpscr & FPSCR_IXE)) { + /* + * Synchronous exception, emulate the trigger instruction + */ goto emulate; } - barrier(); + if (fpexc & FPEXC_EX) { + /* + * Asynchronous exception. The instruction is read from FPINST + * and the interrupted instruction has to be restarted. + */ + trigger = fmrx(FPINST); + regs->ARM_pc -= 4; + } else if (!(fpexc & FPEXC_DEX)) { + /* + * Illegal combination of bits. It can be caused by an + * unallocated VFP instruction but with FPSCR.IXE set and not + * on VFP subarch 1. + */ + vfp_raise_exceptions(VFP_EXCEPTION_ERROR, trigger, fpscr, regs); + return; + } /* - * Modify fpscr to indicate the number of iterations remaining + * Modify fpscr to indicate the number of iterations remaining. + * If FPEXC.EX is 0, FPEXC.DEX is 1 and the FPEXC.VV bit indicates + * whether FPEXC.VECITR or FPSCR.LEN is used. */ - if (fpexc & FPEXC_EX) { + if (fpexc & (FPEXC_EX | FPEXC_VV)) { u32 len; len = fpexc + (1 << FPEXC_LENGTH_BIT); @@ -262,15 +288,15 @@ void VFP9_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) * FPEXC bounce reason, but this appears to be unreliable. * Emulate the bounced instruction instead. */ - inst = fmrx(FPINST); - exceptions = vfp_emulate_instruction(inst, fpscr, regs); + exceptions = vfp_emulate_instruction(trigger, fpscr, regs); if (exceptions) - vfp_raise_exceptions(exceptions, inst, orig_fpscr, regs); + vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs); /* - * If there isn't a second FP instruction, exit now. + * If there isn't a second FP instruction, exit now. Note that + * the FPEXC.FP2V bit is valid only if FPEXC.EX is 1. */ - if (!(fpexc & FPEXC_FPV2)) + if (fpexc ^ (FPEXC_EX | FPEXC_FP2V)) return; /* @@ -279,10 +305,9 @@ void VFP9_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs) */ barrier(); trigger = fmrx(FPINST2); - orig_fpscr = fpscr = fmrx(FPSCR); emulate: - exceptions = vfp_emulate_instruction(trigger, fpscr, regs); + exceptions = vfp_emulate_instruction(trigger, orig_fpscr, regs); if (exceptions) vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs); } @@ -306,16 +331,9 @@ static int __init vfp_init(void) { unsigned int vfpsid; unsigned int cpu_arch = cpu_architecture(); - u32 access = 0; - if (cpu_arch >= CPU_ARCH_ARMv6) { - access = get_copro_access(); - - /* - * Enable full access to VFP (cp10 and cp11) - */ - set_copro_access(access | CPACC_FULL(10) | CPACC_FULL(11)); - } + if (cpu_arch >= CPU_ARCH_ARMv6) + vfp_enable(NULL); /* * First check that there is a VFP that we can use. @@ -329,15 +347,9 @@ static int __init vfp_init(void) vfp_vector = vfp_null_entry; printk(KERN_INFO "VFP support v0.3: "); - if (VFP_arch) { + if (VFP_arch) printk("not present\n"); - - /* - * Restore the copro access register. - */ - if (cpu_arch >= CPU_ARCH_ARMv6) - set_copro_access(access); - } else if (vfpsid & FPSID_NODOUBLE) { + else if (vfpsid & FPSID_NODOUBLE) { printk("no double precision support\n"); } else { smp_call_function(vfp_enable, NULL, 1, 1); diff --git a/include/asm-arm/vfp.h b/include/asm-arm/vfp.h index bd6be9d7f772..9d474d47b266 100644 --- a/include/asm-arm/vfp.h +++ b/include/asm-arm/vfp.h @@ -8,6 +8,8 @@ #define FPSID cr0 #define FPSCR cr1 #define FPEXC cr8 +#define FPINST cr9 +#define FPINST2 cr10 /* FPSID bits */ #define FPSID_IMPLEMENTER_BIT (24) @@ -28,6 +30,19 @@ /* FPEXC bits */ #define FPEXC_EX (1 << 31) #define FPEXC_EN (1 << 30) +#define FPEXC_DEX (1 << 29) +#define FPEXC_FP2V (1 << 28) +#define FPEXC_VV (1 << 27) +#define FPEXC_TFV (1 << 26) +#define FPEXC_LENGTH_BIT (8) +#define FPEXC_LENGTH_MASK (7 << FPEXC_LENGTH_BIT) +#define FPEXC_IDF (1 << 7) +#define FPEXC_IXF (1 << 4) +#define FPEXC_UFF (1 << 3) +#define FPEXC_OFF (1 << 2) +#define FPEXC_DZF (1 << 1) +#define FPEXC_IOF (1 << 0) +#define FPEXC_TRAP_MASK (FPEXC_IDF|FPEXC_IXF|FPEXC_UFF|FPEXC_OFF|FPEXC_DZF|FPEXC_IOF) /* FPSCR bits */ #define FPSCR_DEFAULT_NAN (1<<25) @@ -55,21 +70,6 @@ #define FPSCR_IXC (1<<4) #define FPSCR_IDC (1<<7) -/* - * VFP9-S specific. - */ -#define FPINST cr9 -#define FPINST2 cr10 - -/* FPEXC bits */ -#define FPEXC_FPV2 (1<<28) -#define FPEXC_LENGTH_BIT (8) -#define FPEXC_LENGTH_MASK (7 << FPEXC_LENGTH_BIT) -#define FPEXC_INV (1 << 7) -#define FPEXC_UFC (1 << 3) -#define FPEXC_OFC (1 << 2) -#define FPEXC_IOC (1 << 0) - /* Bit patterns for decoding the packaged operation descriptors */ #define VFPOPDESC_LENGTH_BIT (9) #define VFPOPDESC_LENGTH_MASK (0x07 << VFPOPDESC_LENGTH_BIT) -- cgit v1.2.3-59-g8ed1b From 25ebee020bd34d1f4c5678538204f0b10bf9f6d5 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 25 Sep 2007 15:22:24 +0100 Subject: [ARM] 4583/1: ARMv7: Add VFPv3 support This patch adds the support for VFPv3 (the kernel currently supports VFPv2). The main difference is 32 double registers (compared to 16). Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/Kconfig | 7 ++++++- arch/arm/vfp/vfp.h | 4 ++++ arch/arm/vfp/vfphw.S | 22 ++++++++++++++++++---- arch/arm/vfp/vfpinstr.h | 6 +++--- include/asm-arm/fpstate.h | 9 +++++++-- include/asm-arm/vfp.h | 6 ++++++ include/asm-arm/vfpmacros.h | 18 ++++++++++++++++-- 7 files changed, 60 insertions(+), 12 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a04f507e7f2c..f4eeb03bc6a9 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -951,7 +951,7 @@ config FPE_FASTFPE config VFP bool "VFP-format floating point maths" - depends on CPU_V6 || CPU_ARM926T + depends on CPU_V6 || CPU_ARM926T || CPU_V7 help Say Y to include VFP support code in the kernel. This is needed if your hardware includes a VFP unit. @@ -961,6 +961,11 @@ config VFP Say N if your target does not have VFP hardware. +config VFPv3 + bool + depends on VFP + default y if CPU_V7 + endmenu menu "Userspace binary formats" diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h index 791d0238c68f..c85860bad585 100644 --- a/arch/arm/vfp/vfp.h +++ b/arch/arm/vfp/vfp.h @@ -265,7 +265,11 @@ struct vfp_double { * which returns (double)0.0. This is useful for the compare with * zero instructions. */ +#ifdef CONFIG_VFPv3 +#define VFP_REG_ZERO 32 +#else #define VFP_REG_ZERO 16 +#endif extern u64 vfp_get_double(unsigned int reg); extern void vfp_put_double(u64 val, unsigned int reg); diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index 53d9f8e8fac3..353f9e5c7919 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -99,12 +99,12 @@ vfp_support_entry: DBGSTR1 "save old state %p", r4 cmp r4, #0 beq no_old_VFP_process + VFPFSTMIA r4, r5 @ save the working registers VFPFMRX r5, FPSCR @ current status tst r1, #FPEXC_EX @ is there additional state to save? VFPFMRX r6, FPINST, NE @ FPINST (only if FPEXC.EX is set) tstne r1, #FPEXC_FP2V @ is there an FPINST2 to read? VFPFMRX r8, FPINST2, NE @ FPINST2 if needed (and present) - VFPFSTMIA r4 @ save the working registers stmia r4, {r1, r5, r6, r8} @ save FPEXC, FPSCR, FPINST, FPINST2 @ and point r4 at the word at the @ start of the register dump @@ -114,7 +114,7 @@ no_old_VFP_process: DBGSTR1 "load state %p", r10 str r10, [r3, r11, lsl #2] @ update the last_VFP_context pointer @ Load the saved state back into the VFP - VFPFLDMIA r10 @ reload the working registers while + VFPFLDMIA r10, r5 @ reload the working registers while @ FPEXC is in a safe state ldmia r10, {r1, r5, r6, r8} @ load FPEXC, FPSCR, FPINST, FPINST2 tst r1, #FPEXC_EX @ is there additional state to restore? @@ -174,12 +174,12 @@ vfp_save_state: @ r0 - save location @ r1 - FPEXC DBGSTR1 "save VFP state %p", r0 + VFPFSTMIA r0, r2 @ save the working registers VFPFMRX r2, FPSCR @ current status tst r1, #FPEXC_EX @ is there additional state to save? VFPFMRX r3, FPINST, NE @ FPINST (only if FPEXC.EX is set) tstne r1, #FPEXC_FP2V @ is there an FPINST2 to read? VFPFMRX r12, FPINST2, NE @ FPINST2 if needed (and present) - VFPFSTMIA r0 @ save the working registers stmia r0, {r1, r2, r3, r12} @ save FPEXC, FPSCR, FPINST, FPINST2 mov pc, lr #endif @@ -217,8 +217,15 @@ vfp_get_double: fmrrd r0, r1, d\dr mov pc, lr .endr +#ifdef CONFIG_VFPv3 + @ d16 - d31 registers + .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 + mrrc p11, 3, r0, r1, c\dr @ fmrrd r0, r1, d\dr + mov pc, lr + .endr +#endif - @ virtual register 16 for compare with zero + @ virtual register 16 (or 32 if VFPv3) for compare with zero mov r0, #0 mov r1, #0 mov pc, lr @@ -231,3 +238,10 @@ vfp_put_double: fmdrr d\dr, r0, r1 mov pc, lr .endr +#ifdef CONFIG_VFPv3 + @ d16 - d31 registers + .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 + mcrr p11, 3, r1, r2, c\dr @ fmdrr r1, r2, d\dr + mov pc, lr + .endr +#endif diff --git a/arch/arm/vfp/vfpinstr.h b/arch/arm/vfp/vfpinstr.h index 7f343a4beca0..15b95b5ab97e 100644 --- a/arch/arm/vfp/vfpinstr.h +++ b/arch/arm/vfp/vfpinstr.h @@ -52,11 +52,11 @@ #define FEXT_TO_IDX(inst) ((inst & 0x000f0000) >> 15 | (inst & (1 << 7)) >> 7) #define vfp_get_sd(inst) ((inst & 0x0000f000) >> 11 | (inst & (1 << 22)) >> 22) -#define vfp_get_dd(inst) ((inst & 0x0000f000) >> 12) +#define vfp_get_dd(inst) ((inst & 0x0000f000) >> 12 | (inst & (1 << 22)) >> 18) #define vfp_get_sm(inst) ((inst & 0x0000000f) << 1 | (inst & (1 << 5)) >> 5) -#define vfp_get_dm(inst) ((inst & 0x0000000f)) +#define vfp_get_dm(inst) ((inst & 0x0000000f) | (inst & (1 << 5)) >> 1) #define vfp_get_sn(inst) ((inst & 0x000f0000) >> 15 | (inst & (1 << 7)) >> 7) -#define vfp_get_dn(inst) ((inst & 0x000f0000) >> 16) +#define vfp_get_dn(inst) ((inst & 0x000f0000) >> 16 | (inst & (1 << 7)) >> 3) #define vfp_single(inst) (((inst) & 0x0000f00) == 0xa00) diff --git a/include/asm-arm/fpstate.h b/include/asm-arm/fpstate.h index f31cda5a55ee..392eb5332323 100644 --- a/include/asm-arm/fpstate.h +++ b/include/asm-arm/fpstate.h @@ -17,14 +17,18 @@ /* * VFP storage area has: * - FPEXC, FPSCR, FPINST and FPINST2. - * - 16 double precision data registers - * - an implementation-dependant word of state for FLDMX/FSTMX + * - 16 or 32 double precision data registers + * - an implementation-dependant word of state for FLDMX/FSTMX (pre-ARMv6) * * FPEXC will always be non-zero once the VFP has been used in this process. */ struct vfp_hard_struct { +#ifdef CONFIG_VFPv3 + __u64 fpregs[32]; +#else __u64 fpregs[16]; +#endif #if __LINUX_ARM_ARCH__ < 6 __u32 fpmx_state; #endif @@ -35,6 +39,7 @@ struct vfp_hard_struct { */ __u32 fpinst; __u32 fpinst2; + #ifdef CONFIG_SMP __u32 cpu; #endif diff --git a/include/asm-arm/vfp.h b/include/asm-arm/vfp.h index 9d474d47b266..5f9a2cb3d452 100644 --- a/include/asm-arm/vfp.h +++ b/include/asm-arm/vfp.h @@ -7,6 +7,8 @@ #define FPSID cr0 #define FPSCR cr1 +#define MVFR1 cr6 +#define MVFR0 cr7 #define FPEXC cr8 #define FPINST cr9 #define FPINST2 cr10 @@ -70,6 +72,10 @@ #define FPSCR_IXC (1<<4) #define FPSCR_IDC (1<<7) +/* MVFR0 bits */ +#define MVFR0_A_SIMD_BIT (0) +#define MVFR0_A_SIMD_MASK (0xf << MVFR0_A_SIMD_BIT) + /* Bit patterns for decoding the packaged operation descriptors */ #define VFPOPDESC_LENGTH_BIT (9) #define VFPOPDESC_LENGTH_MASK (0x07 << VFPOPDESC_LENGTH_BIT) diff --git a/include/asm-arm/vfpmacros.h b/include/asm-arm/vfpmacros.h index 27fe028b4e72..cccb3892e73c 100644 --- a/include/asm-arm/vfpmacros.h +++ b/include/asm-arm/vfpmacros.h @@ -15,19 +15,33 @@ .endm @ read all the working registers back into the VFP - .macro VFPFLDMIA, base + .macro VFPFLDMIA, base, tmp #if __LINUX_ARM_ARCH__ < 6 LDC p11, cr0, [\base],#33*4 @ FLDMIAX \base!, {d0-d15} #else LDC p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d0-d15} +#endif +#ifdef CONFIG_VFPv3 + VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 + and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field + cmp \tmp, #2 @ 32 x 64bit registers? + ldceql p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} + addne \base, \base, #32*4 @ step over unused register space #endif .endm @ write all the working registers out of the VFP - .macro VFPFSTMIA, base + .macro VFPFSTMIA, base, tmp #if __LINUX_ARM_ARCH__ < 6 STC p11, cr0, [\base],#33*4 @ FSTMIAX \base!, {d0-d15} #else STC p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d0-d15} +#endif +#ifdef CONFIG_VFPv3 + VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 + and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field + cmp \tmp, #2 @ 32 x 64bit registers? + stceql p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} + addne \base, \base, #32*4 @ step over unused register space #endif .endm -- cgit v1.2.3-59-g8ed1b From b5872db4a2ebe7dbc7a5e4013ae8ee37f3de3b97 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 10 Jan 2008 19:16:17 +0100 Subject: [ARM] 4584/2: ARMv7: Add Advanced SIMD (NEON) extension support This patch enables the use of the Advanced SIMD (NEON) extension on ARMv7. The NEON technology is a 64/128-bit hybrid SIMD architecture for accelerating the performance of multimedia and signal processing applications. The extension shares the registers with the VFP unit and enabling/disabling and saving/restoring follow the same rules. In addition, there are instructions that do not have the appropriate CP number encoded, the checks being made in the call_fpe function. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/Kconfig | 7 +++++++ arch/arm/kernel/entry-armv.S | 38 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 45 insertions(+) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f4eeb03bc6a9..709f9d383c87 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -966,6 +966,13 @@ config VFPv3 depends on VFP default y if CPU_V7 +config NEON + bool "Advanced SIMD (NEON) Extension support" + depends on VFPv3 && CPU_V7 + help + Say Y to include support code for NEON, the ARMv7 Advanced SIMD + Extension. + endmenu menu "Userspace binary formats" diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 29dec080a604..8de21f51e48c 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -480,6 +480,13 @@ __und_usr: * co-processor instructions. However, we have to watch out * for the ARM6/ARM7 SWI bug. * + * NEON is a special case that has to be handled here. Not all + * NEON instructions are co-processor instructions, so we have + * to make a special case of checking for them. Plus, there's + * five groups of them, so we have a table of mask/opcode pairs + * to check against, and if any match then we branch off into the + * NEON handler code. + * * Emulators may wish to make use of the following registers: * r0 = instruction opcode. * r2 = PC+4 @@ -488,6 +495,23 @@ __und_usr: * lr = unrecognised instruction return address */ call_fpe: +#ifdef CONFIG_NEON + adr r6, .LCneon_opcodes +2: + ldr r7, [r6], #4 @ mask value + cmp r7, #0 @ end mask? + beq 1f + and r8, r0, r7 + ldr r7, [r6], #4 @ opcode bits matching in mask + cmp r8, r7 @ NEON instruction? + bne 2b + get_thread_info r10 + mov r7, #1 + strb r7, [r10, #TI_USED_CP + 10] @ mark CP#10 as used + strb r7, [r10, #TI_USED_CP + 11] @ mark CP#11 as used + b do_vfp @ let VFP handler handle this +1: +#endif tst r0, #0x08000000 @ only CDP/CPRT/LDC/STC have bit 27 #if defined(CONFIG_CPU_ARM610) || defined(CONFIG_CPU_ARM710) and r8, r0, #0x0f000000 @ mask out op-code bits @@ -537,6 +561,20 @@ call_fpe: mov pc, lr @ CP#14 (Debug) mov pc, lr @ CP#15 (Control) +#ifdef CONFIG_NEON + .align 6 + +.LCneon_opcodes: + .word 0xfe000000 @ mask + .word 0xf2000000 @ opcode + + .word 0xff100000 @ mask + .word 0xf4000000 @ opcode + + .word 0x00000000 @ mask + .word 0x00000000 @ opcode +#endif + do_fpe: enable_irq ldr r4, .LCfp -- cgit v1.2.3-59-g8ed1b From 2fd2b1242810fb4d2ba36548fecc1f005c36770c Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 26 Jan 2008 14:47:48 +0000 Subject: [ARM] Update mach-types Signed-off-by: Russell King --- arch/arm/tools/mach-types | 258 ++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 251 insertions(+), 7 deletions(-) diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 0a9a5e7f62e5..7ed58c0c24c2 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Fri May 11 19:53:41 2007 +# Last update: Sat Jan 26 14:45:34 2008 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -266,7 +266,7 @@ stork_egg ARCH_STORK_EGG STORK_EGG 248 wismo SA1100_WISMO WISMO 249 ezlinx ARCH_EZLINX EZLINX 250 at91rm9200 ARCH_AT91RM9200 AT91RM9200 251 -orion ARCH_ORION ORION 252 +adtech_orion ARCH_ADTECH_ORION ADTECH_ORION 252 neptune ARCH_NEPTUNE NEPTUNE 253 hackkit SA1100_HACKKIT HACKKIT 254 pxa_wins30 ARCH_PXA_WINS30 PXA_WINS30 255 @@ -661,7 +661,6 @@ a9200ec MACH_A9200EC A9200EC 645 pnx0105 MACH_PNX0105 PNX0105 646 adcpoecpu MACH_ADCPOECPU ADCPOECPU 647 csb637 MACH_CSB637 CSB637 648 -ml69q6203 MACH_ML69Q6203 ML69Q6203 649 mb9200 MACH_MB9200 MB9200 650 kulun MACH_KULUN KULUN 651 snapper MACH_SNAPPER SNAPPER 652 @@ -953,7 +952,6 @@ fred_jack MACH_FRED_JACK FRED_JACK 939 ttg_color1 MACH_TTG_COLOR1 TTG_COLOR1 940 nxeb500hmi MACH_NXEB500HMI NXEB500HMI 941 netdcu8 MACH_NETDCU8 NETDCU8 942 -ml675050_cpu_boa MACH_ML675050_CPU_BOA ML675050_CPU_BOA 943 ng_fvx538 MACH_NG_FVX538 NG_FVX538 944 ng_fvs338 MACH_NG_FVS338 NG_FVS338 945 pnx4103 MACH_PNX4103 PNX4103 946 @@ -1148,7 +1146,7 @@ aidx270 MACH_AIDX270 AIDX270 1134 rema MACH_REMA REMA 1135 bps1000 MACH_BPS1000 BPS1000 1136 hw90350 MACH_HW90350 HW90350 1137 -omap_sdp3430 MACH_OMAP_SDP3430 OMAP_SDP3430 1138 +omap_3430sdp MACH_OMAP_3430SDP OMAP_3430SDP 1138 bluetouch MACH_BLUETOUCH BLUETOUCH 1139 vstms MACH_VSTMS VSTMS 1140 xsbase270 MACH_XSBASE270 XSBASE270 1141 @@ -1214,7 +1212,7 @@ osstbox MACH_OSSTBOX OSSTBOX 1203 kbat9261 MACH_KBAT9261 KBAT9261 1204 ct1100 MACH_CT1100 CT1100 1205 akcppxa MACH_AKCPPXA AKCPPXA 1206 -zevio_1020 MACH_ZEVIO_1020 ZEVIO_1020 1207 +ochaya1020 MACH_OCHAYA1020 OCHAYA1020 1207 hitrack MACH_HITRACK HITRACK 1208 syme1 MACH_SYME1 SYME1 1209 syhl1 MACH_SYHL1 SYHL1 1210 @@ -1299,7 +1297,7 @@ xp179 MACH_XP179 XP179 1290 h4300 MACH_H4300 H4300 1291 goramo_mlr MACH_GORAMO_MLR GORAMO_MLR 1292 mxc30020evb MACH_MXC30020EVB MXC30020EVB 1293 -adsbitsymx MACH_ADSBITSIMX ADSBITSIMX 1294 +adsbitsyg5 MACH_ADSBITSYG5 ADSBITSYG5 1294 adsportalplus MACH_ADSPORTALPLUS ADSPORTALPLUS 1295 mmsp2plus MACH_MMSP2PLUS MMSP2PLUS 1296 em_x270 MACH_EM_X270 EM_X270 1297 @@ -1367,3 +1365,249 @@ db88f5281 MACH_DB88F5281 DB88F5281 1358 csb726 MACH_CSB726 CSB726 1359 tik27 MACH_TIK27 TIK27 1360 mx_uc7420 MACH_MX_UC7420 MX_UC7420 1361 +rirm3 MACH_RIRM3 RIRM3 1362 +pelco_odyssey MACH_PELCO_ODYSSEY PELCO_ODYSSEY 1363 +adx_abox MACH_ADX_ABOX ADX_ABOX 1365 +adx_tpid MACH_ADX_TPID ADX_TPID 1366 +minicheck MACH_MINICHECK MINICHECK 1367 +idam MACH_IDAM IDAM 1368 +mario_mx MACH_MARIO_MX MARIO_MX 1369 +vi1888 MACH_VI1888 VI1888 1370 +zr4230 MACH_ZR4230 ZR4230 1371 +t1_ix_blue MACH_T1_IX_BLUE T1_IX_BLUE 1372 +syhq2 MACH_SYHQ2 SYHQ2 1373 +computime_r3 MACH_COMPUTIME_R3 COMPUTIME_R3 1374 +oratis MACH_ORATIS ORATIS 1375 +mikko MACH_MIKKO MIKKO 1376 +holon MACH_HOLON HOLON 1377 +olip8 MACH_OLIP8 OLIP8 1378 +ghi270hg MACH_GHI270HG GHI270HG 1379 +davinci_dm6467_evm MACH_DAVINCI_DM6467_EVM DAVINCI_DM6467_EVM 1380 +davinci_dm355_evm MACH_DAVINCI_DM350_EVM DAVINCI_DM350_EVM 1381 +blackriver MACH_BLACKRIVER BLACKRIVER 1383 +sandgate_wp MACH_SANDGATEWP SANDGATEWP 1384 +cdotbwsg MACH_CDOTBWSG CDOTBWSG 1385 +quark963 MACH_QUARK963 QUARK963 1386 +csb735 MACH_CSB735 CSB735 1387 +littleton MACH_LITTLETON LITTLETON 1388 +mio_p550 MACH_MIO_P550 MIO_P550 1389 +motion2440 MACH_MOTION2440 MOTION2440 1390 +imm500 MACH_IMM500 IMM500 1391 +homematic MACH_HOMEMATIC HOMEMATIC 1392 +ermine MACH_ERMINE ERMINE 1393 +kb9202b MACH_KB9202B KB9202B 1394 +hs1xx MACH_HS1XX HS1XX 1395 +studentmate2440 MACH_STUDENTMATE2440 STUDENTMATE2440 1396 +arvoo_l1_z1 MACH_ARVOO_L1_Z1 ARVOO_L1_Z1 1397 +dep2410k MACH_DEP2410K DEP2410K 1398 +xxsvideo MACH_XXSVIDEO XXSVIDEO 1399 +im4004 MACH_IM4004 IM4004 1400 +ochaya1050 MACH_OCHAYA1050 OCHAYA1050 1401 +lep9261 MACH_LEP9261 LEP9261 1402 +svenmeb MACH_SVENMEB SVENMEB 1403 +fortunet2ne MACH_FORTUNET2NE FORTUNET2NE 1404 +nxhx MACH_NXHX NXHX 1406 +realview_pb11mp MACH_REALVIEW_PB11MP REALVIEW_PB11MP 1407 +ids500 MACH_IDS500 IDS500 1408 +ors_n725 MACH_ORS_N725 ORS_N725 1409 +hsdarm MACH_HSDARM HSDARM 1410 +sha_pon003 MACH_SHA_PON003 SHA_PON003 1411 +sha_pon004 MACH_SHA_PON004 SHA_PON004 1412 +sha_pon007 MACH_SHA_PON007 SHA_PON007 1413 +sha_pon011 MACH_SHA_PON011 SHA_PON011 1414 +h6042 MACH_H6042 H6042 1415 +h6043 MACH_H6043 H6043 1416 +looxc550 MACH_LOOXC550 LOOXC550 1417 +cnty_titan MACH_CNTY_TITAN CNTY_TITAN 1418 +app3xx MACH_APP3XX APP3XX 1419 +sideoatsgrama MACH_SIDEOATSGRAMA SIDEOATSGRAMA 1420 +xscale_palmt700p MACH_XSCALE_PALMT700P XSCALE_PALMT700P 1421 +xscale_palmt700w MACH_XSCALE_PALMT700W XSCALE_PALMT700W 1422 +xscale_palmt750 MACH_XSCALE_PALMT750 XSCALE_PALMT750 1423 +xscale_palmt755p MACH_XSCALE_PALMT755P XSCALE_PALMT755P 1424 +ezreganut9200 MACH_EZREGANUT9200 EZREGANUT9200 1425 +sarge MACH_SARGE SARGE 1426 +a696 MACH_A696 A696 1427 +turtle1916 MACH_TURTLE TURTLE 1428 +mx27_3ds MACH_MX27_3DS MX27_3DS 1430 +bishop MACH_BISHOP BISHOP 1431 +pxx MACH_PXX PXX 1432 +redwood MACH_REDWOOD REDWOOD 1433 +omap_2430dlp MACH_OMAP_2430DLP OMAP_2430DLP 1436 +omap_2430osk MACH_OMAP_2430OSK OMAP_2430OSK 1437 +sardine MACH_SARDINE SARDINE 1438 +halibut MACH_HALIBUT HALIBUT 1439 +trout MACH_TROUT TROUT 1440 +goldfish MACH_GOLDFISH GOLDFISH 1441 +gesbc2440 MACH_GESBC2440 GESBC2440 1442 +nomad MACH_NOMAD NOMAD 1443 +rosalind MACH_ROSALIND ROSALIND 1444 +cc9p9215 MACH_CC9P9215 CC9P9215 1445 +cc9p9210 MACH_CC9P9210 CC9P9210 1446 +cc9p9215js MACH_CC9P9215JS CC9P9215JS 1447 +cc9p9210js MACH_CC9P9210JS CC9P9210JS 1448 +nasffe MACH_NASFFE NASFFE 1449 +tn2x0bd MACH_TN2X0BD TN2X0BD 1450 +gwmpxa MACH_GWMPXA GWMPXA 1451 +exyplus MACH_EXYPLUS EXYPLUS 1452 +jadoo21 MACH_JADOO21 JADOO21 1453 +looxn560 MACH_LOOXN560 LOOXN560 1454 +bonsai MACH_BONSAI BONSAI 1455 +adsmilgato MACH_ADSMILGATO ADSMILGATO 1456 +gba MACH_GBA GBA 1457 +h6044 MACH_H6044 H6044 1458 +app MACH_APP APP 1459 +tct_hammer MACH_TCT_HAMMER TCT_HAMMER 1460 +herald MACH_HERMES HERMES 1461 +artemis MACH_ARTEMIS ARTEMIS 1462 +htctitan MACH_HTCTITAN HTCTITAN 1463 +qranium MACH_QRANIUM QRANIUM 1464 +adx_wsc2 MACH_ADX_WSC2 ADX_WSC2 1465 +adx_medinet MACH_ADX_MEDINET ADX_MEDINET 1466 +bboard MACH_BBOARD BBOARD 1467 +cambria MACH_CAMBRIA CAMBRIA 1468 +mt7xxx MACH_MT7XXX MT7XXX 1469 +matrix512 MACH_MATRIX512 MATRIX512 1470 +matrix522 MACH_MATRIX522 MATRIX522 1471 +ipac5010 MACH_IPAC5010 IPAC5010 1472 +sakura MACH_SAKURA SAKURA 1473 +grocx MACH_GROCX GROCX 1474 +pm9263 MACH_PM9263 PM9263 1475 +sim_one MACH_SIM_ONE SIM_ONE 1476 +acq132 MACH_ACQ132 ACQ132 1477 +datr MACH_DATR DATR 1478 +actux1 MACH_ACTUX1 ACTUX1 1479 +actux2 MACH_ACTUX2 ACTUX2 1480 +actux3 MACH_ACTUX3 ACTUX3 1481 +flexit MACH_FLEXIT FLEXIT 1482 +bh2x0bd MACH_BH2X0BD BH2X0BD 1483 +atb2002 MACH_ATB2002 ATB2002 1484 +xenon MACH_XENON XENON 1485 +fm607 MACH_FM607 FM607 1486 +matrix514 MACH_MATRIX514 MATRIX514 1487 +matrix524 MACH_MATRIX524 MATRIX524 1488 +inpod MACH_INPOD INPOD 1489 +jive MACH_JIVE JIVE 1490 +tll_mx21 MACH_TLL_MX21 TLL_MX21 1491 +sbc2800 MACH_SBC2800 SBC2800 1492 +cc7ucamry MACH_CC7UCAMRY CC7UCAMRY 1493 +ubisys_p9_sc15 MACH_UBISYS_P9_SC15 UBISYS_P9_SC15 1494 +ubisys_p9_ssc2d10 MACH_UBISYS_P9_SSC2D10 UBISYS_P9_SSC2D10 1495 +ubisys_p9_rcu3 MACH_UBISYS_P9_RCU3 UBISYS_P9_RCU3 1496 +aml_m8000 MACH_AML_M8000 AML_M8000 1497 +snapper_270 MACH_SNAPPER_270 SNAPPER_270 1498 +omap_bbx MACH_OMAP_BBX OMAP_BBX 1499 +ucn2410 MACH_UCN2410 UCN2410 1500 +sam9_l9260 MACH_SAM9_L9260 SAM9_L9260 1501 +eti_c2 MACH_ETI_C2 ETI_C2 1502 +avalanche MACH_AVALANCHE AVALANCHE 1503 +realview_pb1176 MACH_REALVIEW_PB1176 REALVIEW_PB1176 1504 +dp1500 MACH_DP1500 DP1500 1505 +apple_iphone MACH_APPLE_IPHONE APPLE_IPHONE 1506 +yl9200 MACH_YL9200 YL9200 1507 +rd88f5182 MACH_RD88F5182 RD88F5182 1508 +kurobox_pro MACH_KUROBOX_PRO KUROBOX_PRO 1509 +se_poet MACH_SE_POET SE_POET 1510 +mx31_3ds MACH_MX31_3DS MX31_3DS 1511 +r270 MACH_R270 R270 1512 +armour21 MACH_ARMOUR21 ARMOUR21 1513 +dt2 MACH_DT2 DT2 1514 +vt4 MACH_VT4 VT4 1515 +tyco320 MACH_TYCO320 TYCO320 1516 +adma MACH_ADMA ADMA 1517 +wp188 MACH_WP188 WP188 1518 +corsica MACH_CORSICA CORSICA 1519 +bigeye MACH_BIGEYE BIGEYE 1520 +tll5000 MACH_TLL5000 TLL5000 1522 +hni270 MACH_HNI_X270 HNI_X270 1523 +qong MACH_QONG QONG 1524 +tcompact MACH_TCOMPACT TCOMPACT 1525 +puma5 MACH_PUMA5 PUMA5 1526 +elara MACH_ELARA ELARA 1527 +ellington MACH_ELLINGTON ELLINGTON 1528 +xda_atom MACH_XDA_ATOM XDA_ATOM 1529 +energizer2 MACH_ENERGIZER2 ENERGIZER2 1530 +odin MACH_ODIN ODIN 1531 +actux4 MACH_ACTUX4 ACTUX4 1532 +esl_omap MACH_ESL_OMAP ESL_OMAP 1533 +omap2evm MACH_OMAP2EVM OMAP2EVM 1534 +omap3evm MACH_OMAP3EVM OMAP3EVM 1535 +adx_pcu57 MACH_ADX_PCU57 ADX_PCU57 1536 +monaco MACH_MONACO MONACO 1537 +levante MACH_LEVANTE LEVANTE 1538 +tmxipx425 MACH_TMXIPX425 TMXIPX425 1539 +leep MACH_LEEP LEEP 1540 +raad MACH_RAAD RAAD 1541 +dns323 MACH_DNS323 DNS323 1542 +ap1000 MACH_AP1000 AP1000 1543 +a9sam6432 MACH_A9SAM6432 A9SAM6432 1544 +shiny MACH_SHINY SHINY 1545 +omap3_beagle MACH_OMAP3_BEAGLE OMAP3_BEAGLE 1546 +csr_bdb2 MACH_CSR_BDB2 CSR_BDB2 1547 +nokia_n810 MACH_NOKIA_N810 NOKIA_N810 1548 +c270 MACH_C270 C270 1549 +sentry MACH_SENTRY SENTRY 1550 +pcm038 MACH_PCM038 PCM038 1551 +anc300 MACH_ANC300 ANC300 1552 +htckaiser MACH_HTCKAISER HTCKAISER 1553 +sbat100 MACH_SBAT100 SBAT100 1554 +modunorm MACH_MODUNORM MODUNORM 1555 +pelos_twarm MACH_PELOS_TWARM PELOS_TWARM 1556 +flank MACH_FLANK FLANK 1557 +sirloin MACH_SIRLOIN SIRLOIN 1558 +brisket MACH_BRISKET BRISKET 1559 +chuck MACH_CHUCK CHUCK 1560 +otter MACH_OTTER OTTER 1561 +davinci_ldk MACH_DAVINCI_LDK DAVINCI_LDK 1562 +phreedom MACH_PHREEDOM PHREEDOM 1563 +sg310 MACH_SG310 SG310 1564 +ts_x09 MACH_TS209 TS209 1565 +at91cap9adk MACH_AT91CAP9ADK AT91CAP9ADK 1566 +tion9315 MACH_TION9315 TION9315 1567 +mast MACH_MAST MAST 1568 +pfw MACH_PFW PFW 1569 +yl_p2440 MACH_YL_P2440 YL_P2440 1570 +zsbc32 MACH_ZSBC32 ZSBC32 1571 +omap_pace2 MACH_OMAP_PACE2 OMAP_PACE2 1572 +imx_pace2 MACH_IMX_PACE2 IMX_PACE2 1573 +mx31moboard MACH_MX31MOBOARD MX31MOBOARD 1574 +mx37_3ds MACH_MX37_3DS MX37_3DS 1575 +rcc MACH_RCC RCC 1576 +dmp MACH_ARM9 ARM9 1577 +vision_ep9307 MACH_VISION_EP9307 VISION_EP9307 1578 +scly1000 MACH_SCLY1000 SCLY1000 1579 +fontel_ep MACH_FONTEL_EP FONTEL_EP 1580 +voiceblue3g MACH_VOICEBLUE3G VOICEBLUE3G 1581 +tt9200 MACH_TT9200 TT9200 1582 +digi2410 MACH_DIGI2410 DIGI2410 1583 +terastation_pro2 MACH_TERASTATION_PRO2 TERASTATION_PRO2 1584 +linkstation_pro MACH_LINKSTATION_PRO LINKSTATION_PRO 1585 +motorola_a780 MACH_MOTOROLA_A780 MOTOROLA_A780 1587 +motorola_e6 MACH_MOTOROLA_E6 MOTOROLA_E6 1588 +motorola_e2 MACH_MOTOROLA_E2 MOTOROLA_E2 1589 +motorola_e680 MACH_MOTOROLA_E680 MOTOROLA_E680 1590 +ur2410 MACH_UR2410 UR2410 1591 +tas9261 MACH_TAS9261 TAS9261 1592 +davinci_hermes_hd MACH_HERMES_HD HERMES_HD 1593 +davinci_perseo_hd MACH_PERSEO_HD PERSEO_HD 1594 +stargazer2 MACH_STARGAZER2 STARGAZER2 1595 +e350 MACH_E350 E350 1596 +wpcm450 MACH_WPCM450 WPCM450 1597 +cartesio MACH_CARTESIO CARTESIO 1598 +toybox MACH_TOYBOX TOYBOX 1599 +tx27 MACH_TX27 TX27 1600 +ts409 MACH_TS409 TS409 1601 +p300 MACH_P300 P300 1602 +xdacomet MACH_XDACOMET XDACOMET 1603 +dexflex2 MACH_DEXFLEX2 DEXFLEX2 1604 +ow MACH_OW OW 1605 +armebs3 MACH_ARMEBS3 ARMEBS3 1606 +u3 MACH_U3 U3 1607 +smdk2450 MACH_SMDK2450 SMDK2450 1608 +rsi_ews MACH_RSI_EWS RSI_EWS 1609 +tnb MACH_TNB TNB 1610 +toepath MACH_TOEPATH TOEPATH 1611 +kb9263 MACH_KB9263 KB9263 1612 +mt7108 MACH_MT7108 MT7108 1613 +smtr2440 MACH_SMTR2440 SMTR2440 1614 +manao MACH_MANAO MANAO 1615 -- cgit v1.2.3-59-g8ed1b From df1a29032060680d258689448dca37bb003c4c2c Mon Sep 17 00:00:00 2001 From: Alejandro Martinez Ruiz Date: Wed, 17 Oct 2007 12:14:25 +0200 Subject: [ARM] ARRAY_SIZE() cleanup Signed-off-by: Alejandro Martinez Ruiz Signed-off-by: Russell King --- arch/arm/kernel/dma-isa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/kernel/dma-isa.c index 0a3e9ad297d8..2f080a35a2d9 100644 --- a/arch/arm/kernel/dma-isa.c +++ b/arch/arm/kernel/dma-isa.c @@ -216,7 +216,7 @@ void __init isa_init_dma(dma_t *dma) request_dma(DMA_ISA_CASCADE, "cascade"); - for (i = 0; i < sizeof(dma_resources) / sizeof(dma_resources[0]); i++) + for (i = 0; i < ARRAY_SIZE(dma_resources); i++) request_resource(&ioport_resource, dma_resources + i); } } -- cgit v1.2.3-59-g8ed1b From f1a6de9c7efc8e3fb535f1e61848f671f90b5cd5 Mon Sep 17 00:00:00 2001 From: Jan Altenberg Date: Tue, 2 Oct 2007 13:26:43 -0700 Subject: [ARM] Remove at91_lcdc.h include/asm-arm/arch-at91/at91_lcdc.h (which is still present in latest git) has been superseeded by include/video/atmel_lcdc.h, so let's remove it. Signed-off-by: Jan Altenberg Cc: Andrew Victor Cc: Nicolas Ferre Signed-off-by: Andrew Morton Signed-off-by: Russell King --- include/asm-arm/arch-at91/at91_lcdc.h | 148 ---------------------------------- 1 file changed, 148 deletions(-) delete mode 100644 include/asm-arm/arch-at91/at91_lcdc.h diff --git a/include/asm-arm/arch-at91/at91_lcdc.h b/include/asm-arm/arch-at91/at91_lcdc.h deleted file mode 100644 index ab040a40d37b..000000000000 --- a/include/asm-arm/arch-at91/at91_lcdc.h +++ /dev/null @@ -1,148 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91_lcdc.h - * - * LCD Controller (LCDC). - * Based on AT91SAM9261 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_LCDC_H -#define AT91_LCDC_H - -#define AT91_LCDC_DMABADDR1 0x00 /* DMA Base Address Register 1 */ -#define AT91_LCDC_DMABADDR2 0x04 /* DMA Base Address Register 2 */ -#define AT91_LCDC_DMAFRMPT1 0x08 /* DMA Frame Pointer Register 1 */ -#define AT91_LCDC_DMAFRMPT2 0x0c /* DMA Frame Pointer Register 2 */ -#define AT91_LCDC_DMAFRMADD1 0x10 /* DMA Frame Address Register 1 */ -#define AT91_LCDC_DMAFRMADD2 0x14 /* DMA Frame Address Register 2 */ - -#define AT91_LCDC_DMAFRMCFG 0x18 /* DMA Frame Configuration Register */ -#define AT91_LCDC_FRSIZE (0x7fffff << 0) /* Frame Size */ -#define AT91_LCDC_BLENGTH (0x7f << 24) /* Burst Length */ - -#define AT91_LCDC_DMACON 0x1c /* DMA Control Register */ -#define AT91_LCDC_DMAEN (0x1 << 0) /* DMA Enable */ -#define AT91_LCDC_DMARST (0x1 << 1) /* DMA Reset */ -#define AT91_LCDC_DMABUSY (0x1 << 2) /* DMA Busy */ - -#define AT91_LCDC_LCDCON1 0x0800 /* LCD Control Register 1 */ -#define AT91_LCDC_BYPASS (1 << 0) /* Bypass lcd_dotck divider */ -#define AT91_LCDC_CLKVAL (0x1ff << 12) /* Clock Divider */ -#define AT91_LCDC_LINCNT (0x7ff << 21) /* Line Counter */ - -#define AT91_LCDC_LCDCON2 0x0804 /* LCD Control Register 2 */ -#define AT91_LCDC_DISTYPE (3 << 0) /* Display Type */ -#define AT91_LCDC_DISTYPE_STNMONO (0 << 0) -#define AT91_LCDC_DISTYPE_STNCOLOR (1 << 0) -#define AT91_LCDC_DISTYPE_TFT (2 << 0) -#define AT91_LCDC_SCANMOD (1 << 2) /* Scan Mode */ -#define AT91_LCDC_SCANMOD_SINGLE (0 << 2) -#define AT91_LCDC_SCANMOD_DUAL (1 << 2) -#define AT91_LCDC_IFWIDTH (3 << 3) /*Interface Width */ -#define AT91_LCDC_IFWIDTH_4 (0 << 3) -#define AT91_LCDC_IFWIDTH_8 (1 << 3) -#define AT91_LCDC_IFWIDTH_16 (2 << 3) -#define AT91_LCDC_PIXELSIZE (7 << 5) /* Bits per pixel */ -#define AT91_LCDC_PIXELSIZE_1 (0 << 5) -#define AT91_LCDC_PIXELSIZE_2 (1 << 5) -#define AT91_LCDC_PIXELSIZE_4 (2 << 5) -#define AT91_LCDC_PIXELSIZE_8 (3 << 5) -#define AT91_LCDC_PIXELSIZE_16 (4 << 5) -#define AT91_LCDC_PIXELSIZE_24 (5 << 5) -#define AT91_LCDC_INVVD (1 << 8) /* LCD Data polarity */ -#define AT91_LCDC_INVVD_NORMAL (0 << 8) -#define AT91_LCDC_INVVD_INVERTED (1 << 8) -#define AT91_LCDC_INVFRAME (1 << 9 ) /* LCD VSync polarity */ -#define AT91_LCDC_INVFRAME_NORMAL (0 << 9) -#define AT91_LCDC_INVFRAME_INVERTED (1 << 9) -#define AT91_LCDC_INVLINE (1 << 10) /* LCD HSync polarity */ -#define AT91_LCDC_INVLINE_NORMAL (0 << 10) -#define AT91_LCDC_INVLINE_INVERTED (1 << 10) -#define AT91_LCDC_INVCLK (1 << 11) /* LCD dotclk polarity */ -#define AT91_LCDC_INVCLK_NORMAL (0 << 11) -#define AT91_LCDC_INVCLK_INVERTED (1 << 11) -#define AT91_LCDC_INVDVAL (1 << 12) /* LCD dval polarity */ -#define AT91_LCDC_INVDVAL_NORMAL (0 << 12) -#define AT91_LCDC_INVDVAL_INVERTED (1 << 12) -#define AT91_LCDC_CLKMOD (1 << 15) /* LCD dotclk mode */ -#define AT91_LCDC_CLKMOD_ACTIVEDISPLAY (0 << 15) -#define AT91_LCDC_CLKMOD_ALWAYSACTIVE (1 << 15) -#define AT91_LCDC_MEMOR (1 << 31) /* Memory Ordering Format */ -#define AT91_LCDC_MEMOR_BIG (0 << 31) -#define AT91_LCDC_MEMOR_LITTLE (1 << 31) - -#define AT91_LCDC_TIM1 0x0808 /* LCD Timing Register 1 */ -#define AT91_LCDC_VFP (0xff << 0) /* Vertical Front Porch */ -#define AT91_LCDC_VBP (0xff << 8) /* Vertical Back Porch */ -#define AT91_LCDC_VPW (0x3f << 16) /* Vertical Synchronization Pulse Width */ -#define AT91_LCDC_VHDLY (0xf << 24) /* Vertical to Horizontal Delay */ - -#define AT91_LCDC_TIM2 0x080c /* LCD Timing Register 2 */ -#define AT91_LCDC_HBP (0xff << 0) /* Horizontal Back Porch */ -#define AT91_LCDC_HPW (0x3f << 8) /* Horizontal Synchronization Pulse Width */ -#define AT91_LCDC_HFP (0x7ff << 21) /* Horizontal Front Porch */ - -#define AT91_LCDC_LCDFRMCFG 0x0810 /* LCD Frame Configuration Register */ -#define AT91_LCDC_LINEVAL (0x7ff << 0) /* Vertical Size of LCD Module */ -#define AT91_LCDC_HOZVAL (0x7ff << 21) /* Horizontal Size of LCD Module */ - -#define AT91_LCDC_FIFO 0x0814 /* LCD FIFO Register */ -#define AT91_LCDC_FIFOTH (0xffff) /* FIFO Threshold */ - -#define AT91_LCDC_DP1_2 0x081c /* Dithering Pattern DP1_2 Register */ -#define AT91_LCDC_DP4_7 0x0820 /* Dithering Pattern DP4_7 Register */ -#define AT91_LCDC_DP3_5 0x0824 /* Dithering Pattern DP3_5 Register */ -#define AT91_LCDC_DP2_3 0x0828 /* Dithering Pattern DP2_3 Register */ -#define AT91_LCDC_DP5_7 0x082c /* Dithering Pattern DP5_7 Register */ -#define AT91_LCDC_DP3_4 0x0830 /* Dithering Pattern DP3_4 Register */ -#define AT91_LCDC_DP4_5 0x0834 /* Dithering Pattern DP4_5 Register */ -#define AT91_LCDC_DP6_7 0x0838 /* Dithering Pattern DP6_7 Register */ -#define AT91_LCDC_DP1_2_VAL (0xff) -#define AT91_LCDC_DP4_7_VAL (0xfffffff) -#define AT91_LCDC_DP3_5_VAL (0xfffff) -#define AT91_LCDC_DP2_3_VAL (0xfff) -#define AT91_LCDC_DP5_7_VAL (0xfffffff) -#define AT91_LCDC_DP3_4_VAL (0xffff) -#define AT91_LCDC_DP4_5_VAL (0xfffff) -#define AT91_LCDC_DP6_7_VAL (0xfffffff) - -#define AT91_LCDC_PWRCON 0x083c /* Power Control Register */ -#define AT91_LCDC_PWR (1 << 0) /* LCD Module Power Control */ -#define AT91_LCDC_GUARDT (0x7f << 1) /* Delay in Frame Period */ -#define AT91_LCDC_BUSY (1 << 31) /* LCD Busy */ - -#define AT91_LCDC_CONTRAST_CTR 0x0840 /* Contrast Control Register */ -#define AT91_LCDC_PS (3 << 0) /* Contrast Counter Prescaler */ -#define AT91_LCDC_PS_DIV1 (0 << 0) -#define AT91_LCDC_PS_DIV2 (1 << 0) -#define AT91_LCDC_PS_DIV4 (2 << 0) -#define AT91_LCDC_PS_DIV8 (3 << 0) -#define AT91_LCDC_POL (1 << 2) /* Polarity of output Pulse */ -#define AT91_LCDC_POL_NEGATIVE (0 << 2) -#define AT91_LCDC_POL_POSITIVE (1 << 2) -#define AT91_LCDC_ENA (1 << 3) /* PWM generator Control */ -#define AT91_LCDC_ENA_PWMDISABLE (0 << 3) -#define AT91_LCDC_ENA_PWMENABLE (1 << 3) - -#define AT91_LCDC_CONTRAST_VAL 0x0844 /* Contrast Value Register */ -#define AT91_LCDC_CVAL (0xff) /* PWM compare value */ - -#define AT91_LCDC_IER 0x0848 /* Interrupt Enable Register */ -#define AT91_LCDC_IDR 0x084c /* Interrupt Disable Register */ -#define AT91_LCDC_IMR 0x0850 /* Interrupt Mask Register */ -#define AT91_LCDC_ISR 0x0854 /* Interrupt Enable Register */ -#define AT91_LCDC_ICR 0x0858 /* Interrupt Clear Register */ -#define AT91_LCDC_LNI (1 << 0) /* Line Interrupt */ -#define AT91_LCDC_LSTLNI (1 << 1) /* Last Line Interrupt */ -#define AT91_LCDC_EOFI (1 << 2) /* DMA End Of Frame Interrupt */ -#define AT91_LCDC_UFLWI (1 << 4) /* FIFO Underflow Interrupt */ -#define AT91_LCDC_OWRI (1 << 5) /* FIFO Overwrite Interrupt */ -#define AT91_LCDC_MERI (1 << 6) /* DMA Memory Error Interrupt */ - -#define AT91_LCDC_LUT_(n) (0x0c00 + ((n)*4)) /* Palette Entry 0..255 */ - -#endif -- cgit v1.2.3-59-g8ed1b From e8f2af17757b54db7f307b75e088489c480eb889 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Fri, 26 Oct 2007 05:40:25 -0400 Subject: [ARM] Misc minor interrupt handler cleanups mach-integrator/pci_v3.c: no need to reference 'irq' arg, its constant mach-omap1/pm.c: remove extra whitespace arch/arm/mach-sa1100/ssp.c: remove braces around single C stmt arch/arm/plat-omap/mcbsp.c: - remove pointless casts from void* - make longer lines more readable Signed-off-by: Jeff Garzik Acked-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/mach-integrator/pci_v3.c | 8 +++++--- arch/arm/mach-omap1/pm.c | 2 +- arch/arm/mach-sa1100/ssp.c | 3 +-- arch/arm/plat-omap/mcbsp.c | 20 ++++++++++++-------- 4 files changed, 19 insertions(+), 14 deletions(-) diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index d4d8134ce567..d55fa4e9bb43 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -440,7 +440,7 @@ v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) return 1; } -static irqreturn_t v3_irq(int irq, void *devid) +static irqreturn_t v3_irq(int dummy, void *devid) { #ifdef CONFIG_DEBUG_LL struct pt_regs *regs = get_irq_regs(); @@ -448,8 +448,10 @@ static irqreturn_t v3_irq(int irq, void *devid) unsigned long instr = *(unsigned long *)pc; char buf[128]; - sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x ISTAT=%02x\n", irq, - pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255, + sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x " + "ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr, + __raw_readl(SC_LBFADDR), + __raw_readl(SC_LBFCODE) & 255, v3_readb(V3_LB_ISTAT)); printascii(buf); #endif diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index d9805e3d9304..06b7e54a0128 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -639,7 +639,7 @@ static void omap_pm_finish(void) } -static irqreturn_t omap_wakeup_interrupt(int irq, void *dev) +static irqreturn_t omap_wakeup_interrupt(int irq, void *dev) { return IRQ_HANDLED; } diff --git a/arch/arm/mach-sa1100/ssp.c b/arch/arm/mach-sa1100/ssp.c index 59703c6fb29b..06206ceb312e 100644 --- a/arch/arm/mach-sa1100/ssp.c +++ b/arch/arm/mach-sa1100/ssp.c @@ -29,9 +29,8 @@ static irqreturn_t ssp_interrupt(int irq, void *dev_id) { unsigned int status = Ser4SSSR; - if (status & SSSR_ROR) { + if (status & SSSR_ROR) printk(KERN_WARNING "SSP: receiver overrun\n"); - } Ser4SSSR = SSSR_ROR; diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index f7b9ccdaacbc..2af5bd5a1344 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -98,9 +98,10 @@ static void omap_mcbsp_dump_reg(u8 id) static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id) { - struct omap_mcbsp * mcbsp_tx = (struct omap_mcbsp *)(dev_id); + struct omap_mcbsp *mcbsp_tx = dev_id; - DBG("TX IRQ callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2)); + DBG("TX IRQ callback : 0x%x\n", + OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2)); complete(&mcbsp_tx->tx_irq_completion); return IRQ_HANDLED; @@ -108,9 +109,10 @@ static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id) static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id) { - struct omap_mcbsp * mcbsp_rx = (struct omap_mcbsp *)(dev_id); + struct omap_mcbsp *mcbsp_rx = dev_id; - DBG("RX IRQ callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2)); + DBG("RX IRQ callback : 0x%x\n", + OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2)); complete(&mcbsp_rx->rx_irq_completion); return IRQ_HANDLED; @@ -118,9 +120,10 @@ static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id) static void omap_mcbsp_tx_dma_callback(int lch, u16 ch_status, void *data) { - struct omap_mcbsp * mcbsp_dma_tx = (struct omap_mcbsp *)(data); + struct omap_mcbsp *mcbsp_dma_tx = data; - DBG("TX DMA callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_dma_tx->io_base, SPCR2)); + DBG("TX DMA callback : 0x%x\n", + OMAP_MCBSP_READ(mcbsp_dma_tx->io_base, SPCR2)); /* We can free the channels */ omap_free_dma(mcbsp_dma_tx->dma_tx_lch); @@ -131,9 +134,10 @@ static void omap_mcbsp_tx_dma_callback(int lch, u16 ch_status, void *data) static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data) { - struct omap_mcbsp * mcbsp_dma_rx = (struct omap_mcbsp *)(data); + struct omap_mcbsp *mcbsp_dma_rx = data; - DBG("RX DMA callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_dma_rx->io_base, SPCR2)); + DBG("RX DMA callback : 0x%x\n", + OMAP_MCBSP_READ(mcbsp_dma_rx->io_base, SPCR2)); /* We can free the channels */ omap_free_dma(mcbsp_dma_rx->dma_rx_lch); -- cgit v1.2.3-59-g8ed1b From 2a7057e306b198e1e0d7db8615d8e9c69b880913 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Fri, 26 Oct 2007 05:40:22 -0400 Subject: [ARM] Remove pointless casts from void pointers, mostly in and around irq handlers. Signed-off-by: Jeff Garzik Signed-off-by: Russell King --- arch/arm/mach-pxa/ssp.c | 2 +- arch/arm/mach-s3c2410/usb-simtec.c | 2 +- arch/arm/plat-omap/mailbox.c | 2 +- sound/oss/waveartist.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c index 422afee88169..b2eb38543d1c 100644 --- a/arch/arm/mach-pxa/ssp.c +++ b/arch/arm/mach-pxa/ssp.c @@ -67,7 +67,7 @@ static int use_count[PXA_SSP_PORTS] = {0, 0, 0}; static irqreturn_t ssp_interrupt(int irq, void *dev_id) { - struct ssp_dev *dev = (struct ssp_dev*) dev_id; + struct ssp_dev *dev = dev_id; unsigned int status = SSSR_P(dev->port); SSSR_P(dev->port) = status; /* clear status bits */ diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c index bcd562ac1d3d..6aec86a5da56 100644 --- a/arch/arm/mach-s3c2410/usb-simtec.c +++ b/arch/arm/mach-s3c2410/usb-simtec.c @@ -60,7 +60,7 @@ usb_simtec_powercontrol(int port, int to) static irqreturn_t usb_simtec_ocirq(int irq, void *pw) { - struct s3c2410_hcd_info *info = (struct s3c2410_hcd_info *)pw; + struct s3c2410_hcd_info *info = pw; if (s3c2410_gpio_getpin(S3C2410_GPG10) == 0) { pr_debug("usb_simtec: over-current irq (oc detected)\n"); diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index 0360b1f14d11..45a77df668f1 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -212,7 +212,7 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox) static irqreturn_t mbox_interrupt(int irq, void *p) { - struct omap_mbox *mbox = (struct omap_mbox *)p; + struct omap_mbox *mbox = p; if (is_mbox_irq(mbox, IRQ_TX)) __mbox_tx_interrupt(mbox); diff --git a/sound/oss/waveartist.c b/sound/oss/waveartist.c index b48c72923a13..88490418f932 100644 --- a/sound/oss/waveartist.c +++ b/sound/oss/waveartist.c @@ -835,7 +835,7 @@ static struct audio_driver waveartist_audio_driver = { static irqreturn_t waveartist_intr(int irq, void *dev_id) { - wavnc_info *devc = (wavnc_info *)dev_id; + wavnc_info *devc = dev_id; int irqstatus, status; spin_lock(&waveartist_lock); -- cgit v1.2.3-59-g8ed1b From c5f333831fe2ff1656f954aabdb3eb8c276169cc Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 Nov 2007 15:12:22 +0000 Subject: [SERIAL] 21285: Report baud rate back via termios Currently reports back the requested rate not the result of the divides but thats an easy fix for someone with h/w Signed-off-by: Alan Cox Signed-off-by: Russell King --- drivers/serial/21285.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c index facb67855619..6a48dfa1efe8 100644 --- a/drivers/serial/21285.c +++ b/drivers/serial/21285.c @@ -277,6 +277,8 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios, if (termios->c_iflag & INPCK) port->read_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY; + tty_encode_baud_rate(tty, baud, baud); + /* * Which character status flags should we ignore? */ -- cgit v1.2.3-59-g8ed1b From e173dbf68869dd1fe64c16b8d6ae2fbe6a3b2f89 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Wed, 21 Nov 2007 14:51:49 -0800 Subject: [ARM] remove reference to non-existent MTD_OBSOLETE_CHIPS The CONFIG variable MTD_OBSOLETE_CHIPS was deleted in commit ba7cc09c9c9e29a57045dc5bbf843ac1cfad3283. Signed-off-by: Robert P. J. Day Signed-off-by: Andrew Morton Signed-off-by: Russell King --- arch/arm/configs/collie_defconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig index 970c8c772eb7..4264e273202d 100644 --- a/arch/arm/configs/collie_defconfig +++ b/arch/arm/configs/collie_defconfig @@ -367,7 +367,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -CONFIG_MTD_OBSOLETE_CHIPS=y CONFIG_MTD_SHARP=y # CONFIG_MTD_XIP is not set -- cgit v1.2.3-59-g8ed1b From d2936b1976a9c70d1cce4700c51f26d4b9495e9d Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Sun, 25 Nov 2007 02:12:39 +0100 Subject: [ARM] 4666/1: ixp4xx: fix sparse warnings in include/asm-arm/arch-ixp4xx/io.h Don't lose __iomem in casts. Use __force to cast __iomem addresses to integers. Use __force to cast u32 to __le32 and vice versa. Signed-off-by: Pavel Roskin Signed-off-by: Russell King --- include/asm-arm/arch-ixp4xx/io.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/include/asm-arm/arch-ixp4xx/io.h b/include/asm-arm/arch-ixp4xx/io.h index eeeea90cd5a9..9c5d2357aff3 100644 --- a/include/asm-arm/arch-ixp4xx/io.h +++ b/include/asm-arm/arch-ixp4xx/io.h @@ -61,13 +61,13 @@ __ixp4xx_ioremap(unsigned long addr, size_t size, unsigned int mtype) if((addr < PCIBIOS_MIN_MEM) || (addr > 0x4fffffff)) return __arm_ioremap(addr, size, mtype); - return (void *)addr; + return (void __iomem *)addr; } static inline void __ixp4xx_iounmap(void __iomem *addr) { - if ((u32)addr >= VMALLOC_START) + if ((__force u32)addr >= VMALLOC_START) __iounmap(addr); } @@ -141,9 +141,9 @@ __ixp4xx_writesw(volatile void __iomem *bus_addr, const u16 *vaddr, int count) static inline void __ixp4xx_writel(u32 value, volatile void __iomem *p) { - u32 addr = (u32)p; + u32 addr = (__force u32)p; if (addr >= VMALLOC_START) { - __raw_writel(value, addr); + __raw_writel(value, p); return; } @@ -208,11 +208,11 @@ __ixp4xx_readsw(const volatile void __iomem *bus_addr, u16 *vaddr, u32 count) static inline unsigned long __ixp4xx_readl(const volatile void __iomem *p) { - u32 addr = (u32)p; + u32 addr = (__force u32)p; u32 data; if (addr >= VMALLOC_START) - return __raw_readl(addr); + return __raw_readl(p); if (ixp4xx_pci_read(addr, NP_CMD_MEMREAD, &data)) return 0xffffffff; @@ -438,7 +438,7 @@ __ixp4xx_ioread32(const void __iomem *addr) return (unsigned int)__ixp4xx_inl(port & PIO_MASK); else { #ifndef CONFIG_IXP4XX_INDIRECT_PCI - return le32_to_cpu(__raw_readl((u32)port)); + return le32_to_cpu((__force __le32)__raw_readl(addr)); #else return (unsigned int)__ixp4xx_readl(addr); #endif @@ -523,7 +523,7 @@ __ixp4xx_iowrite32(u32 value, void __iomem *addr) __ixp4xx_outl(value, port & PIO_MASK); else #ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_writel(cpu_to_le32(value), port); + __raw_writel((u32 __force)cpu_to_le32(value), addr); #else __ixp4xx_writel(value, addr); #endif -- cgit v1.2.3-59-g8ed1b From 7b544c99e0328937932022da3cbdd38cf3f072ec Mon Sep 17 00:00:00 2001 From: "George G. Davis" Date: Sat, 1 Dec 2007 05:49:41 +0100 Subject: [ARM] 4687/1: Trivial arch/arm/kernel/entry-common.S comment fix Make the comment match the code Signed-off-by: George G. Davis Signed-off-by: Russell King --- arch/arm/kernel/entry-common.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 33e6cc2ffd3b..6c90c50a9ee3 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -72,7 +72,7 @@ no_work_pending: ldr r1, [sp, #S_PSR] @ get calling cpsr ldr lr, [sp, #S_PC]! @ get pc msr spsr_cxsf, r1 @ save in spsr_svc - ldmdb sp, {r0 - lr}^ @ get calling r1 - lr + ldmdb sp, {r0 - lr}^ @ get calling r0 - lr mov r0, r0 add sp, sp, #S_FRAME_SIZE - S_PC movs pc, lr @ return & move spsr_svc into cpsr -- cgit v1.2.3-59-g8ed1b From 70b6f2b4af709bded5220bcd8f3b4e255de20411 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Tue, 4 Dec 2007 14:33:33 +0100 Subject: [ARM] 4689/1: small comment wrap fix Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/kernel/entry-armv.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 29dec080a604..d65b07207b61 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -11,8 +11,8 @@ * * Low-level vector interface routines * - * Note: there is a StrongARM bug in the STMIA rn, {regs}^ instruction that causes - * it to save wrong values... Be aware! + * Note: there is a StrongARM bug in the STMIA rn, {regs}^ instruction + * that causes it to save wrong values... Be aware! */ #include -- cgit v1.2.3-59-g8ed1b From ddf4e42c6a109392851d8843e2699bffd3c476bf Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 24 Jul 2007 18:37:01 +0200 Subject: [ARM] CONFIG_DEBUG_STACK_USAGE In early 2.6 days stack utilization instrumentation was made configurable. Seems that arm misses the DEBUG_STACK_USAGE option. Signed-off-by: Sascha Hauer Signed-off-by: Russell King --- arch/arm/Kconfig.debug | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 18101f5f5f24..192ee01a9ba2 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -43,6 +43,12 @@ config DEBUG_ERRORS you are concerned with the code size or don't want to see these messages. +config DEBUG_STACK_USAGE + bool "Enable stack utilization instrumentation" + depends on DEBUG_KERNEL + help + Enables the display of the minimum amount of free stack which each + task has ever had available in the sysrq-T output. # These options are only for real kernel hackers who want to get their hands dirty. config DEBUG_LL -- cgit v1.2.3-59-g8ed1b From 1d7d4f54b1337bf64605dc9cb3c540f67843be39 Mon Sep 17 00:00:00 2001 From: Lucas Woods Date: Wed, 21 Nov 2007 14:51:51 -0800 Subject: [ARM] remove duplicate includes Signed-off-by: Lucas Woods Acked-by: Lennert Buytenhek Signed-off-by: Andrew Morton Signed-off-by: Russell King --- arch/arm/common/rtctime.c | 1 - arch/arm/mach-ep93xx/core.c | 1 - arch/arm/mach-ixp23xx/core.c | 1 - arch/arm/mach-ixp23xx/espresso.c | 2 -- arch/arm/mach-ixp23xx/ixdp2351.c | 2 -- arch/arm/mach-ixp23xx/roadrunner.c | 2 -- arch/arm/mach-ixp4xx/nslu2-power.c | 1 - arch/arm/mach-omap1/board-nokia770.c | 1 - arch/arm/mach-omap1/board-osk.c | 1 - arch/arm/mach-omap1/board-palmtt.c | 1 - arch/arm/mach-omap1/board-palmz71.c | 1 - arch/arm/mach-omap2/board-apollon.c | 1 - 12 files changed, 15 deletions(-) diff --git a/arch/arm/common/rtctime.c b/arch/arm/common/rtctime.c index bf1075e1f571..f53bca46e23c 100644 --- a/arch/arm/common/rtctime.c +++ b/arch/arm/common/rtctime.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 70b2c7801110..f8f001dd27d8 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c index 16356ffc86ae..5fea5a132939 100644 --- a/arch/arm/mach-ixp23xx/core.c +++ b/arch/arm/mach-ixp23xx/core.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c index 7a85ced56718..d3a779a7a35f 100644 --- a/arch/arm/mach-ixp23xx/espresso.c +++ b/arch/arm/mach-ixp23xx/espresso.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include @@ -40,7 +39,6 @@ #include #include #include -#include #include static int __init espresso_pci_init(void) diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c index c41a6b5a0acc..5c5d4d66dee8 100644 --- a/arch/arm/mach-ixp23xx/ixdp2351.c +++ b/arch/arm/mach-ixp23xx/ixdp2351.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include #include @@ -44,7 +43,6 @@ #include #include #include -#include #include /* diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c index e35644961aa4..f0f70ba1e46d 100644 --- a/arch/arm/mach-ixp23xx/roadrunner.c +++ b/arch/arm/mach-ixp23xx/roadrunner.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include #include @@ -44,7 +43,6 @@ #include #include #include -#include #include /* diff --git a/arch/arm/mach-ixp4xx/nslu2-power.c b/arch/arm/mach-ixp4xx/nslu2-power.c index acd71e9c38a7..6f10dc208320 100644 --- a/arch/arm/mach-ixp4xx/nslu2-power.c +++ b/arch/arm/mach-ixp4xx/nslu2-power.c @@ -21,7 +21,6 @@ #include #include #include -#include #include diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 182a98a9df4c..e2c8ffd75cff 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -32,7 +32,6 @@ #include #include #include -#include #include #include diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 5db182da322b..4081a42db91e 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -31,7 +31,6 @@ #include #include #include -#include #include #include diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index e47010fec275..ed7094a70064 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -42,7 +42,6 @@ #include #include -#include #include #include diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index c275d517764a..a9a0f6610c3d 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -44,7 +44,6 @@ #include #include -#include #include #include diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 3bb49c17c858..94e38cc2bb6c 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include -- cgit v1.2.3-59-g8ed1b From b696b6b448d3ec5f882aa346ce544e00763e7b3d Mon Sep 17 00:00:00 2001 From: Gordon Farquharson Date: Sat, 26 Jan 2008 08:35:44 +0100 Subject: [ARM] 4770/1: GLAN Tank: correct physmap_flash_data width field This patch is required, in conjunction with the patch submitted to linux-mtd [1], to access the flash memory device in the GLAN Tank. Without the patches, the boot log shows physmap platform flash device: 00080000 at f0000000 ... physmap-flash physmap-flash.0: map_probe failed whereas with the patches, the boot log shows physmap platform flash device: 00080000 at f0000000 Found: ST M29W400DB physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank number of JEDEC chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. ... cmdlinepart partition parsing not available Searching for RedBoot partition table in physmap-flash.0 at offset 0x70000 No RedBoot partition table detected in physmap-flash.0 The change made by this patch is required because the ST M29W400DB flash memory chip in the GLAN Tank is used in 16 bit bus mode (~BYTE pin is high when the board is powered on). [1] http://lists.infradead.org/pipermail/linux-mtd/2008-January/020291.html Signed-off-by: Gordon Farquharson Signed-off-by: Russell King --- arch/arm/mach-iop32x/glantank.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c index 6309f9a99fd5..74c65ce221de 100644 --- a/arch/arm/mach-iop32x/glantank.c +++ b/arch/arm/mach-iop32x/glantank.c @@ -119,7 +119,7 @@ subsys_initcall(glantank_pci_init); * GLAN Tank machine initialization. */ static struct physmap_flash_data glantank_flash_data = { - .width = 1, + .width = 2, }; static struct resource glantank_flash_resource = { -- cgit v1.2.3-59-g8ed1b From b66545e7ae80b4b0eef3f7884ef9260455070be9 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Fri, 23 Nov 2007 16:09:10 +0100 Subject: [ARM] 4602/3: AT91: debugfs interface to view GPIO pin state This patch adds a debug interface (if CONFIG_DEBUG_FS is selected) to display the basic configuration and current state of the GPIO pins on the Atmel AT91 processors. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/gpio.c | 62 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+) diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index aa2d365c93fb..6aeddd68d8af 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -13,6 +13,8 @@ #include #include #include +#include +#include #include #include #include @@ -414,6 +416,66 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) /*--------------------------------------------------------------------------*/ +#ifdef CONFIG_DEBUG_FS + +static int at91_gpio_show(struct seq_file *s, void *unused) +{ + int bank, j; + + /* print heading */ + seq_printf(s, "Pin\t"); + for (bank = 0; bank < gpio_banks; bank++) { + seq_printf(s, "PIO%c\t", 'A' + bank); + }; + seq_printf(s, "\n\n"); + + /* print pin status */ + for (j = 0; j < 32; j++) { + seq_printf(s, "%i:\t", j); + + for (bank = 0; bank < gpio_banks; bank++) { + unsigned pin = PIN_BASE + (32 * bank) + j; + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (__raw_readl(pio + PIO_PSR) & mask) + seq_printf(s, "GPIO:%s", __raw_readl(pio + PIO_PDSR) & mask ? "1" : "0"); + else + seq_printf(s, "%s", __raw_readl(pio + PIO_ABSR) & mask ? "B" : "A"); + + seq_printf(s, "\t"); + } + + seq_printf(s, "\n"); + } + + return 0; +} + +static int at91_gpio_open(struct inode *inode, struct file *file) +{ + return single_open(file, at91_gpio_show, NULL); +} + +static const struct file_operations at91_gpio_operations = { + .open = at91_gpio_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init at91_gpio_debugfs_init(void) +{ + /* /sys/kernel/debug/at91_gpio */ + (void) debugfs_create_file("at91_gpio", S_IFREG | S_IRUGO, NULL, NULL, &at91_gpio_operations); + return 0; +} +postcore_initcall(at91_gpio_debugfs_init); + +#endif + +/*--------------------------------------------------------------------------*/ + /* * Called from the processor-specific init to enable GPIO interrupt support. */ -- cgit v1.2.3-59-g8ed1b From 5170874816fc1eb2b0b865a70b6f520268227908 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Tue, 20 Nov 2007 09:40:12 +0100 Subject: [ARM] 4610/2: AT91: Support for STN LCD on SAM9261-EK board. Add STN LCD support on the Atmel AT91SAM9261-EK board. Uses a black and white screen from Hitachi: SP06Q002. Signed-off-by: Nicolas Ferre Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/board-sam9261ek.c | 76 ++++++++++++++++++++++++++++++++---- 1 file changed, 69 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 550ae59a3aca..594c5c100ef9 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -280,6 +280,68 @@ static struct spi_board_info ek_spi_devices[] = { * LCD Controller */ #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) + +#if defined(CONFIG_FB_ATMEL_STN) + +/* STN */ +static struct fb_videomode at91_stn_modes[] = { + { + .name = "SP06Q002 @ 75", + .refresh = 75, + .xres = 320, .yres = 240, + .pixclock = KHZ2PICOS(1440), + + .left_margin = 1, .right_margin = 1, + .upper_margin = 0, .lower_margin = 0, + .hsync_len = 1, .vsync_len = 1, + + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED, + }, +}; + +static struct fb_monspecs at91fb_default_stn_monspecs = { + .manufacturer = "HIT", + .monitor = "SP06Q002", + + .modedb = at91_stn_modes, + .modedb_len = ARRAY_SIZE(at91_stn_modes), + .hfmin = 15000, + .hfmax = 64000, + .vfmin = 50, + .vfmax = 150, +}; + +#define AT91SAM9261_DEFAULT_STN_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ + | ATMEL_LCDC_DISTYPE_STNMONO \ + | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE \ + | ATMEL_LCDC_IFWIDTH_4 \ + | ATMEL_LCDC_SCANMOD_SINGLE) + +static void at91_lcdc_stn_power_control(int on) +{ + /* backlight */ + if (on) { /* power up */ + at91_set_gpio_value(AT91_PIN_PC14, 0); + at91_set_gpio_value(AT91_PIN_PC15, 0); + } else { /* power down */ + at91_set_gpio_value(AT91_PIN_PC14, 1); + at91_set_gpio_value(AT91_PIN_PC15, 1); + } +} + +static struct atmel_lcdfb_info __initdata ek_lcdc_data = { + .default_bpp = 1, + .default_dmacon = ATMEL_LCDC_DMAEN, + .default_lcdcon2 = AT91SAM9261_DEFAULT_STN_LCDCON2, + .default_monspecs = &at91fb_default_stn_monspecs, + .atmel_lcdfb_power_control = at91_lcdc_stn_power_control, + .guard_time = 1, +}; + +#else + +/* TFT */ static struct fb_videomode at91_tft_vga_modes[] = { { .name = "TX09D50VM1CCA @ 60", @@ -296,7 +358,7 @@ static struct fb_videomode at91_tft_vga_modes[] = { }, }; -static struct fb_monspecs at91fb_default_monspecs = { +static struct fb_monspecs at91fb_default_tft_monspecs = { .manufacturer = "HIT", .monitor = "TX09D50VM1CCA", @@ -308,11 +370,11 @@ static struct fb_monspecs at91fb_default_monspecs = { .vfmax = 150, }; -#define AT91SAM9261_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ +#define AT91SAM9261_DEFAULT_TFT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \ | ATMEL_LCDC_DISTYPE_TFT \ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE) -static void at91_lcdc_power_control(int on) +static void at91_lcdc_tft_power_control(int on) { if (on) at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */ @@ -320,15 +382,15 @@ static void at91_lcdc_power_control(int on) at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */ } -/* Driver datas */ static struct atmel_lcdfb_info __initdata ek_lcdc_data = { .default_bpp = 16, .default_dmacon = ATMEL_LCDC_DMAEN, - .default_lcdcon2 = AT91SAM9261_DEFAULT_LCDCON2, - .default_monspecs = &at91fb_default_monspecs, - .atmel_lcdfb_power_control = at91_lcdc_power_control, + .default_lcdcon2 = AT91SAM9261_DEFAULT_TFT_LCDCON2, + .default_monspecs = &at91fb_default_tft_monspecs, + .atmel_lcdfb_power_control = at91_lcdc_tft_power_control, .guard_time = 1, }; +#endif #else static struct atmel_lcdfb_info __initdata ek_lcdc_data; -- cgit v1.2.3-59-g8ed1b From 87fee013a23ad02821699aef5b76891b42959182 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 13 Nov 2007 19:49:25 +0100 Subject: [ARM] 4647/1: at91rm9200: Remove redundant machine-type verification and manipulation AT91RM9200 needlessly verifies machine-type numbers of supported / known platforms and overwrites it for unknown ones. Remove it. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Russell King --- arch/arm/boot/compressed/Makefile | 4 -- arch/arm/boot/compressed/head-at91rm9200.S | 81 ------------------------------ 2 files changed, 85 deletions(-) delete mode 100644 arch/arm/boot/compressed/head-at91rm9200.S diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 5fde99f9d9f9..de9d9ee50958 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -44,10 +44,6 @@ ifeq ($(CONFIG_PXA_SHARPSL),y) OBJS += head-sharpsl.o endif -ifeq ($(CONFIG_ARCH_AT91RM9200),y) -OBJS += head-at91rm9200.o -endif - ifeq ($(CONFIG_CPU_BIG_ENDIAN),y) ifeq ($(CONFIG_CPU_CP15),y) OBJS += big-endian.o diff --git a/arch/arm/boot/compressed/head-at91rm9200.S b/arch/arm/boot/compressed/head-at91rm9200.S deleted file mode 100644 index 11782ccd93a1..000000000000 --- a/arch/arm/boot/compressed/head-at91rm9200.S +++ /dev/null @@ -1,81 +0,0 @@ -/* - * linux/arch/arm/boot/compressed/head-at91rm9200.S - * - * Copyright (C) 2003 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ -#include - - .section ".start", "ax" - - @ Atmel AT91RM9200-DK : 262 - mov r3, #(MACH_TYPE_AT91RM9200DK & 0xff) - orr r3, r3, #(MACH_TYPE_AT91RM9200DK & 0xff00) - cmp r7, r3 - beq 99f - - @ Cogent CSB337 : 399 - mov r3, #(MACH_TYPE_CSB337 & 0xff) - orr r3, r3, #(MACH_TYPE_CSB337 & 0xff00) - cmp r7, r3 - beq 99f - - @ Cogent CSB637 : 648 - mov r3, #(MACH_TYPE_CSB637 & 0xff) - orr r3, r3, #(MACH_TYPE_CSB637 & 0xff00) - cmp r7, r3 - beq 99f - - @ Atmel AT91RM9200-EK : 705 - mov r3, #(MACH_TYPE_AT91RM9200EK & 0xff) - orr r3, r3, #(MACH_TYPE_AT91RM9200EK & 0xff00) - cmp r7, r3 - beq 99f - - @ Conitec Carmeva : 769 - mov r3, #(MACH_TYPE_CARMEVA & 0xff) - orr r3, r3, #(MACH_TYPE_CARMEVA & 0xff00) - cmp r7, r3 - beq 99f - - @ KwikByte KB920x : 612 - mov r3, #(MACH_TYPE_KB9200 & 0xff) - orr r3, r3, #(MACH_TYPE_KB9200 & 0xff00) - cmp r7, r3 - beq 99f - - @ Embest ATEB9200 : 923 - mov r3, #(MACH_TYPE_ATEB9200 & 0xff) - orr r3, r3, #(MACH_TYPE_ATEB9200 & 0xff00) - cmp r7, r3 - beq 99f - - @ Sperry-Sun KAFA : 662 - mov r3, #(MACH_TYPE_KAFA & 0xff) - orr r3, r3, #(MACH_TYPE_KAFA & 0xff00) - cmp r7, r3 - beq 99f - - @ picotux 200 : 963 - mov r3, #(MACH_TYPE_PICOTUX2XX & 0xff) - orr r3, r3, #(MACH_TYPE_PICOTUX2XX & 0xff00) - cmp r7, r3 - beq 99f - - @ Ajeco 1ARM : 1075 - mov r3, #(MACH_TYPE_ONEARM & 0xff) - orr r3, r3, #(MACH_TYPE_ONEARM & 0xff00) - cmp r7, r3 - beq 99f - - @ Unknown board, use the AT91RM9200DK board - @ mov r7, #MACH_TYPE_AT91RM9200 - mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff) - orr r7, r7, #(MACH_TYPE_AT91RM9200DK & 0xff00) - -99: -- cgit v1.2.3-59-g8ed1b From 7cbed2b507efd1bb19a574b8db14d5aad5936d6d Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Tue, 20 Nov 2007 08:46:53 +0100 Subject: [ARM] 4656/1: AT91: Tweak interrupt priorities Slight tweaking of the default interrupt priorities (AIC) for the integrated peripherals on the AT91RM9200, AT91SAM9260, AT91SAM9261 and AT91SAM9263 processors. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/at91rm9200.c | 30 +++++++++++++++--------------- arch/arm/mach-at91/at91sam9260.c | 28 ++++++++++++++-------------- arch/arm/mach-at91/at91sam9261.c | 28 ++++++++++++++-------------- arch/arm/mach-at91/at91sam9263.c | 30 +++++++++++++++--------------- 4 files changed, 58 insertions(+), 58 deletions(-) diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 2cad2bf864be..d688c1dbd925 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -301,28 +301,28 @@ void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { 7, /* Advanced Interrupt Controller (FIQ) */ 7, /* System Peripherals */ - 0, /* Parallel IO Controller A */ - 0, /* Parallel IO Controller B */ - 0, /* Parallel IO Controller C */ - 0, /* Parallel IO Controller D */ - 6, /* USART 0 */ - 6, /* USART 1 */ - 6, /* USART 2 */ - 6, /* USART 3 */ + 1, /* Parallel IO Controller A */ + 1, /* Parallel IO Controller B */ + 1, /* Parallel IO Controller C */ + 1, /* Parallel IO Controller D */ + 5, /* USART 0 */ + 5, /* USART 1 */ + 5, /* USART 2 */ + 5, /* USART 3 */ 0, /* Multimedia Card Interface */ - 4, /* USB Device Port */ - 0, /* Two-Wire Interface */ - 6, /* Serial Peripheral Interface */ - 5, /* Serial Synchronous Controller 0 */ - 5, /* Serial Synchronous Controller 1 */ - 5, /* Serial Synchronous Controller 2 */ + 2, /* USB Device Port */ + 6, /* Two-Wire Interface */ + 5, /* Serial Peripheral Interface */ + 4, /* Serial Synchronous Controller 0 */ + 4, /* Serial Synchronous Controller 1 */ + 4, /* Serial Synchronous Controller 2 */ 0, /* Timer Counter 0 */ 0, /* Timer Counter 1 */ 0, /* Timer Counter 2 */ 0, /* Timer Counter 3 */ 0, /* Timer Counter 4 */ 0, /* Timer Counter 5 */ - 3, /* USB Host port */ + 2, /* USB Host port */ 3, /* Ethernet MAC */ 0, /* Advanced Interrupt Controller (IRQ0) */ 0, /* Advanced Interrupt Controller (IRQ1) */ diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index e47381e8aaba..18d06612ce8a 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -327,30 +327,30 @@ void __init at91sam9260_initialize(unsigned long main_clock) static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { 7, /* Advanced Interrupt Controller */ 7, /* System Peripherals */ - 0, /* Parallel IO Controller A */ - 0, /* Parallel IO Controller B */ - 0, /* Parallel IO Controller C */ + 1, /* Parallel IO Controller A */ + 1, /* Parallel IO Controller B */ + 1, /* Parallel IO Controller C */ 0, /* Analog-to-Digital Converter */ - 6, /* USART 0 */ - 6, /* USART 1 */ - 6, /* USART 2 */ + 5, /* USART 0 */ + 5, /* USART 1 */ + 5, /* USART 2 */ 0, /* Multimedia Card Interface */ - 4, /* USB Device Port */ - 0, /* Two-Wire Interface */ - 6, /* Serial Peripheral Interface 0 */ - 6, /* Serial Peripheral Interface 1 */ + 2, /* USB Device Port */ + 6, /* Two-Wire Interface */ + 5, /* Serial Peripheral Interface 0 */ + 5, /* Serial Peripheral Interface 1 */ 5, /* Serial Synchronous Controller */ 0, 0, 0, /* Timer Counter 0 */ 0, /* Timer Counter 1 */ 0, /* Timer Counter 2 */ - 3, /* USB Host port */ + 2, /* USB Host port */ 3, /* Ethernet */ 0, /* Image Sensor Interface */ - 6, /* USART 3 */ - 6, /* USART 4 */ - 6, /* USART 5 */ + 5, /* USART 3 */ + 5, /* USART 4 */ + 5, /* USART 5 */ 0, /* Timer Counter 3 */ 0, /* Timer Counter 4 */ 0, /* Timer Counter 5 */ diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index dfe8c39c9fb9..90b87e1877d9 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -279,25 +279,25 @@ void __init at91sam9261_initialize(unsigned long main_clock) static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { 7, /* Advanced Interrupt Controller */ 7, /* System Peripherals */ - 0, /* Parallel IO Controller A */ - 0, /* Parallel IO Controller B */ - 0, /* Parallel IO Controller C */ + 1, /* Parallel IO Controller A */ + 1, /* Parallel IO Controller B */ + 1, /* Parallel IO Controller C */ 0, - 6, /* USART 0 */ - 6, /* USART 1 */ - 6, /* USART 2 */ + 5, /* USART 0 */ + 5, /* USART 1 */ + 5, /* USART 2 */ 0, /* Multimedia Card Interface */ - 4, /* USB Device Port */ - 0, /* Two-Wire Interface */ - 6, /* Serial Peripheral Interface 0 */ - 6, /* Serial Peripheral Interface 1 */ - 5, /* Serial Synchronous Controller 0 */ - 5, /* Serial Synchronous Controller 1 */ - 5, /* Serial Synchronous Controller 2 */ + 2, /* USB Device Port */ + 6, /* Two-Wire Interface */ + 5, /* Serial Peripheral Interface 0 */ + 5, /* Serial Peripheral Interface 1 */ + 4, /* Serial Synchronous Controller 0 */ + 4, /* Serial Synchronous Controller 1 */ + 4, /* Serial Synchronous Controller 2 */ 0, /* Timer Counter 0 */ 0, /* Timer Counter 1 */ 0, /* Timer Counter 2 */ - 3, /* USB Host port */ + 2, /* USB Host port */ 3, /* LCD Controller */ 0, 0, diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 00e27b177857..a53ba0f74351 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -304,34 +304,34 @@ void __init at91sam9263_initialize(unsigned long main_clock) static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = { 7, /* Advanced Interrupt Controller (FIQ) */ 7, /* System Peripherals */ - 0, /* Parallel IO Controller A */ - 0, /* Parallel IO Controller B */ - 0, /* Parallel IO Controller C, D and E */ + 1, /* Parallel IO Controller A */ + 1, /* Parallel IO Controller B */ + 1, /* Parallel IO Controller C, D and E */ 0, 0, - 6, /* USART 0 */ - 6, /* USART 1 */ - 6, /* USART 2 */ + 5, /* USART 0 */ + 5, /* USART 1 */ + 5, /* USART 2 */ 0, /* Multimedia Card Interface 0 */ 0, /* Multimedia Card Interface 1 */ - 4, /* CAN */ - 0, /* Two-Wire Interface */ - 6, /* Serial Peripheral Interface 0 */ - 6, /* Serial Peripheral Interface 1 */ - 5, /* Serial Synchronous Controller 0 */ - 5, /* Serial Synchronous Controller 1 */ - 6, /* AC97 Controller */ + 3, /* CAN */ + 6, /* Two-Wire Interface */ + 5, /* Serial Peripheral Interface 0 */ + 5, /* Serial Peripheral Interface 1 */ + 4, /* Serial Synchronous Controller 0 */ + 4, /* Serial Synchronous Controller 1 */ + 5, /* AC97 Controller */ 0, /* Timer Counter 0, 1 and 2 */ 0, /* Pulse Width Modulation Controller */ 3, /* Ethernet */ 0, 0, /* 2D Graphic Engine */ - 3, /* USB Device Port */ + 2, /* USB Device Port */ 0, /* Image Sensor Interface */ 3, /* LDC Controller */ 0, /* DMA Controller */ 0, - 3, /* USB Host port */ + 2, /* USB Host port */ 0, /* Advanced Interrupt Controller (IRQ0) */ 0, /* Advanced Interrupt Controller (IRQ1) */ }; -- cgit v1.2.3-59-g8ed1b From 9ebbec27da6d7f4762b73985ac4929acf061d48b Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Tue, 20 Nov 2007 13:34:56 +0100 Subject: [ARM] 4657/1: AT91: Header definition update Add definitions of registers / bits found on some AT91SAM9 processors Signed-off-by: Andrew Victor Signed-off-by: Russell King --- include/asm-arm/arch-at91/at91_pmc.h | 4 +++- include/asm-arm/arch-at91/at91_twi.h | 11 +++++++++++ include/asm-arm/arch-at91/at91sam9260_matrix.h | 2 +- 3 files changed, 15 insertions(+), 2 deletions(-) diff --git a/include/asm-arm/arch-at91/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h index 33ff5b6798ee..34804eaab4f2 100644 --- a/include/asm-arm/arch-at91/at91_pmc.h +++ b/include/asm-arm/arch-at91/at91_pmc.h @@ -37,7 +37,9 @@ #define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */ #define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */ -#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register */ +#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL only] */ + +#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */ #define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ #define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */ #define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ diff --git a/include/asm-arm/arch-at91/at91_twi.h b/include/asm-arm/arch-at91/at91_twi.h index ca9a90733456..f9f2e3cd95c5 100644 --- a/include/asm-arm/arch-at91/at91_twi.h +++ b/include/asm-arm/arch-at91/at91_twi.h @@ -21,6 +21,8 @@ #define AT91_TWI_STOP (1 << 1) /* Send a Stop Condition */ #define AT91_TWI_MSEN (1 << 2) /* Master Transfer Enable */ #define AT91_TWI_MSDIS (1 << 3) /* Master Transfer Disable */ +#define AT91_TWI_SVEN (1 << 4) /* Slave Transfer Enable [SAM9260 only] */ +#define AT91_TWI_SVDIS (1 << 5) /* Slave Transfer Disable [SAM9260 only] */ #define AT91_TWI_SWRST (1 << 7) /* Software Reset */ #define AT91_TWI_MMR 0x04 /* Master Mode Register */ @@ -32,6 +34,9 @@ #define AT91_TWI_MREAD (1 << 12) /* Master Read Direction */ #define AT91_TWI_DADR (0x7f << 16) /* Device Address */ +#define AT91_TWI_SMR 0x08 /* Slave Mode Register [SAM9260 only] */ +#define AT91_TWI_SADR (0x7f << 16) /* Slave Address */ + #define AT91_TWI_IADR 0x0c /* Internal Address Register */ #define AT91_TWI_CWGR 0x10 /* Clock Waveform Generator Register */ @@ -43,9 +48,15 @@ #define AT91_TWI_TXCOMP (1 << 0) /* Transmission Complete */ #define AT91_TWI_RXRDY (1 << 1) /* Receive Holding Register Ready */ #define AT91_TWI_TXRDY (1 << 2) /* Transmit Holding Register Ready */ +#define AT91_TWI_SVREAD (1 << 3) /* Slave Read [SAM9260 only] */ +#define AT91_TWI_SVACC (1 << 4) /* Slave Access [SAM9260 only] */ +#define AT91_TWI_GACC (1 << 5) /* General Call Access [SAM9260 only] */ #define AT91_TWI_OVRE (1 << 6) /* Overrun Error [AT91RM9200 only] */ #define AT91_TWI_UNRE (1 << 7) /* Underrun Error [AT91RM9200 only] */ #define AT91_TWI_NACK (1 << 8) /* Not Acknowledged */ +#define AT91_TWI_ARBLST (1 << 9) /* Arbitration Lost [SAM9260 only] */ +#define AT91_TWI_SCLWS (1 << 10) /* Clock Wait State [SAM9260 only] */ +#define AT91_TWI_EOSACC (1 << 11) /* End of Slave Address [SAM9260 only] */ #define AT91_TWI_IER 0x24 /* Interrupt Enable Register */ #define AT91_TWI_IDR 0x28 /* Interrupt Disable Register */ diff --git a/include/asm-arm/arch-at91/at91sam9260_matrix.h b/include/asm-arm/arch-at91/at91sam9260_matrix.h index aacb1e976422..a8e9fec6c735 100644 --- a/include/asm-arm/arch-at91/at91sam9260_matrix.h +++ b/include/asm-arm/arch-at91/at91sam9260_matrix.h @@ -67,7 +67,7 @@ #define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ #define AT91_MATRIX_CS4A_SMC (0 << 4) #define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_CS5A (1 << 5 ) /* Chip Select 5 Assignment */ +#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ #define AT91_MATRIX_CS5A_SMC (0 << 5) #define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) #define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -- cgit v1.2.3-59-g8ed1b From 156864f806baa4e1aa6eabd28ac45ecc92b31315 Mon Sep 17 00:00:00 2001 From: Marc Pignat Date: Mon, 3 Dec 2007 12:58:24 +0100 Subject: [ARM] 4688/1: at91: speed-up irq processing Save N instructions on every interrupt processing (where N is the number of interrupts processed in any one IRQ exception). Signed-off-by: Marc Pignat Acked-by: Andrew Victor Signed-off-by: Russell King --- include/asm-arm/arch-at91/entry-macro.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-arm/arch-at91/entry-macro.S b/include/asm-arm/arch-at91/entry-macro.S index cc1d850a0788..1005eee6219b 100644 --- a/include/asm-arm/arch-at91/entry-macro.S +++ b/include/asm-arm/arch-at91/entry-macro.S @@ -17,13 +17,13 @@ .endm .macro get_irqnr_preamble, base, tmp + ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral .endm .macro arch_ret_to_user, tmp1, tmp2 .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral ldr \irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt) ldr \irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)] @ read interrupt source number teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt -- cgit v1.2.3-59-g8ed1b From 5248c657898c018bcd23ef77759fa1d6c690bdf4 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 12 Nov 2007 17:59:10 +0100 Subject: [ARM] 4646/1: AT91: configurable HZ, default to 128 This makes HZ configurable on AT91, following the model used on OMAP. It defaults to a power of two on AT91rm9200 chips, avoiding rounding errors which come from dividing a 32 KiHz clock to generate scheduler irqs; and uses 100 on AT91sam926x chips, using MCK/16 (multi-MHZ). Signed-off-by: David Brownell Acked-by: Remy Bhmer Acked-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/Kconfig | 1 + arch/arm/mach-at91/Kconfig | 16 ++++++++++++++++ 2 files changed, 17 insertions(+) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a04f507e7f2c..93e40b65fd0b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -657,6 +657,7 @@ config HZ default 128 if ARCH_L7200 default 200 if ARCH_EBSA110 || ARCH_S3C2410 default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER + default AT91_TIMER_HZ if ARCH_AT91 default 100 config AEABI diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 05a9f8a1b45e..214733e897e5 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -219,6 +219,22 @@ config AT91_PROGRAMMABLE_CLOCKS Select this if you need to program one or more of the PCK0..PCK3 programmable clock outputs. +config AT91_TIMER_HZ + int "Kernel HZ (jiffies per second)" + range 32 1024 + depends on ARCH_AT91 + default "128" if ARCH_AT91RM9200 + default "100" + help + On AT91rm9200 chips where you're using a system clock derived + from the 32768 Hz hardware clock, this tick rate should divide + it exactly: use a power-of-two value, such as 128 or 256, to + reduce timing errors caused by rounding. + + On AT91sam926x chips, or otherwise when using a higher precision + system clock (of at least several MHz), rounding is less of a + problem so it can be safer to use a decimal values like 100. + endmenu endif -- cgit v1.2.3-59-g8ed1b From a50d49dbb72aff90601fda90ea37a02a606d2d90 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 28 Dec 2007 02:04:52 +0100 Subject: [ARM] 4734/1: at91sam9263ek: include IRQ for Ethernet PHY On the at92sam9263ek board, tell the MACB driver the IRQ used by its PHY. This patch is taken from Andrew Victor's 2.6.23-at91 patchset; it matches board schematics. (But it's currently a NOP since the MACB driver doesn't yet use PHY irqs.) Signed-off-by: David Brownell Signed-off-by: Russell King --- arch/arm/mach-at91/board-sam9263ek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index ab9dcc075454..a9dd59543ec7 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -163,6 +163,7 @@ static struct at91_mmc_data __initdata ek_mmc_data = { * MACB Ethernet device */ static struct at91_eth_data __initdata ek_macb_data = { + .phy_irq_pin = AT91_PIN_PE31, .is_rmii = 1, }; -- cgit v1.2.3-59-g8ed1b From f06e656fb4f6f41ae9cba0f5d6948a6c7f6250ba Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Tue, 22 Jan 2008 11:37:32 +0100 Subject: [ARM] 4750/1: [AT91] STN LCD displays on SAM9261 Add support for STN LCD displays on Atmel AT91SAM9261-based boards. Patch from Nicolas Ferre. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/at91sam9261_devices.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 64979a9023c2..1d03844a607a 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -507,6 +507,17 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) return; } +#if defined(CONFIG_FB_ATMEL_STN) + at91_set_A_periph(AT91_PIN_PB0, 0); /* LCDVSYNC */ + at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */ + at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */ + at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */ + at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */ + at91_set_A_periph(AT91_PIN_PB5, 0); /* LCDD0 */ + at91_set_A_periph(AT91_PIN_PB6, 0); /* LCDD1 */ + at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */ + at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */ +#else at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */ at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */ at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */ @@ -529,6 +540,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */ at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */ at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */ +#endif lcdc_data = *data; platform_device_register(&at91_lcdc_device); -- cgit v1.2.3-59-g8ed1b From e2920802351b3e01a3e70a26bb1bbb22f29da4cb Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Tue, 22 Jan 2008 11:43:26 +0100 Subject: [ARM] 4751/1: [AT91] ISI peripheral on SAM9263 Add support for the Image Sensor Interface (ISI) peripheral integrated in the Atmel AT91SAM9263 processor. Patch from MaLiK Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/at91sam9263_devices.c | 50 ++++++++++++++++++++++++++++++++ include/asm-arm/arch-at91/board.h | 3 ++ 2 files changed, 53 insertions(+) diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index ac329a98e959..d50a8dfb916d 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -731,6 +731,56 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {} #endif +/* -------------------------------------------------------------------- + * Image Sensor Interface + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE) + +struct resource isi_resources[] = { + [0] = { + .start = AT91SAM9263_BASE_ISI, + .end = AT91SAM9263_BASE_ISI + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9263_ID_ISI, + .end = AT91SAM9263_ID_ISI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9263_isi_device = { + .name = "at91_isi", + .id = -1, + .resource = isi_resources, + .num_resources = ARRAY_SIZE(isi_resources), +}; + +void __init at91_add_device_isi(void) +{ + at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */ + at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */ + at91_set_A_periph(AT91_PIN_PE2, 0); /* ISI_D2 */ + at91_set_A_periph(AT91_PIN_PE3, 0); /* ISI_D3 */ + at91_set_A_periph(AT91_PIN_PE4, 0); /* ISI_D4 */ + at91_set_A_periph(AT91_PIN_PE5, 0); /* ISI_D5 */ + at91_set_A_periph(AT91_PIN_PE6, 0); /* ISI_D6 */ + at91_set_A_periph(AT91_PIN_PE7, 0); /* ISI_D7 */ + at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */ + at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */ + at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */ + at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */ + at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */ + at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */ + at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */ + at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */ +} +#else +void __init at91_add_device_isi(void) {} +#endif + + /* -------------------------------------------------------------------- * LEDs * -------------------------------------------------------------------- */ diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h index 79054965baa6..762148cc48c1 100644 --- a/include/asm-arm/arch-at91/board.h +++ b/include/asm-arm/arch-at91/board.h @@ -126,6 +126,9 @@ struct atmel_ac97_data { }; extern void __init at91_add_device_ac97(struct atmel_ac97_data *data); + /* ISI */ +extern void __init at91_add_device_isi(void); + /* LEDs */ extern u8 at91_leds_cpu; extern u8 at91_leds_timer; -- cgit v1.2.3-59-g8ed1b From 884f5a6a8dc8646d5904f166adf3c558be57e1ab Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Wed, 23 Jan 2008 09:11:13 +0100 Subject: [ARM] 4752/1: [AT91] RTT, RTC and WDT peripherals on SAM9 Add platform_device and initialization for the RTT (Real Time Timer) and WDT (Watchdog) integrated in the Atmel AT91SAM9 processors. For SAM9263, register both RTT peripherals. [From: David Brownell ] Provide platform_resources for RTT peripherals [From: David Brownell ] Add support for RTC peripheral on AT91SAM9RL (same RTC peripherals as AT91RM9200) [From: David Brownell ] Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/at91sam9260_devices.c | 47 ++++++++++++++++++++++ arch/arm/mach-at91/at91sam9261_devices.c | 47 ++++++++++++++++++++++ arch/arm/mach-at91/at91sam9263_devices.c | 63 +++++++++++++++++++++++++++++ arch/arm/mach-at91/at91sam9rl_devices.c | 68 ++++++++++++++++++++++++++++++++ include/asm-arm/arch-at91/at91_rtt.h | 8 ++-- 5 files changed, 229 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 3091bf47d8c9..1533556fb873 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -538,6 +538,51 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) #endif +/* -------------------------------------------------------------------- + * RTT + * -------------------------------------------------------------------- */ + +static struct resource rtt_resources[] = { + { + .start = AT91_BASE_SYS + AT91_RTT, + .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device at91sam9260_rtt_device = { + .name = "at91_rtt", + .id = -1, + .resource = rtt_resources, + .num_resources = ARRAY_SIZE(rtt_resources), +}; + +static void __init at91_add_device_rtt(void) +{ + platform_device_register(&at91sam9260_rtt_device); +} + + +/* -------------------------------------------------------------------- + * Watchdog + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) +static struct platform_device at91sam9260_wdt_device = { + .name = "at91_wdt", + .id = -1, + .num_resources = 0, +}; + +static void __init at91_add_device_watchdog(void) +{ + platform_device_register(&at91sam9260_wdt_device); +} +#else +static void __init at91_add_device_watchdog(void) {} +#endif + + /* -------------------------------------------------------------------- * LEDs * -------------------------------------------------------------------- */ @@ -898,6 +943,8 @@ void __init at91_add_device_serial(void) {} */ static int __init at91_add_standard_devices(void) { + at91_add_device_rtt(); + at91_add_device_watchdog(); return 0; } diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 1d03844a607a..17f3f6a24796 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -550,6 +550,51 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {} #endif +/* -------------------------------------------------------------------- + * RTT + * -------------------------------------------------------------------- */ + +static struct resource rtt_resources[] = { + { + .start = AT91_BASE_SYS + AT91_RTT, + .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device at91sam9261_rtt_device = { + .name = "at91_rtt", + .id = -1, + .resource = rtt_resources, + .num_resources = ARRAY_SIZE(rtt_resources), +}; + +static void __init at91_add_device_rtt(void) +{ + platform_device_register(&at91sam9261_rtt_device); +} + + +/* -------------------------------------------------------------------- + * Watchdog + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) +static struct platform_device at91sam9261_wdt_device = { + .name = "at91_wdt", + .id = -1, + .num_resources = 0, +}; + +static void __init at91_add_device_watchdog(void) +{ + platform_device_register(&at91sam9261_wdt_device); +} +#else +static void __init at91_add_device_watchdog(void) {} +#endif + + /* -------------------------------------------------------------------- * LEDs * -------------------------------------------------------------------- */ @@ -786,6 +831,8 @@ void __init at91_add_device_serial(void) {} */ static int __init at91_add_standard_devices(void) { + at91_add_device_rtt(); + at91_add_device_watchdog(); return 0; } diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index d50a8dfb916d..b4eb21769db9 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -781,6 +781,67 @@ void __init at91_add_device_isi(void) {} #endif +/* -------------------------------------------------------------------- + * RTT + * -------------------------------------------------------------------- */ + +static struct resource rtt0_resources[] = { + { + .start = AT91_BASE_SYS + AT91_RTT0, + .end = AT91_BASE_SYS + AT91_RTT0 + SZ_16 - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device at91sam9263_rtt0_device = { + .name = "at91_rtt", + .id = 0, + .resource = rtt0_resources, + .num_resources = ARRAY_SIZE(rtt0_resources), +}; + +static struct resource rtt1_resources[] = { + { + .start = AT91_BASE_SYS + AT91_RTT1, + .end = AT91_BASE_SYS + AT91_RTT1 + SZ_16 - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device at91sam9263_rtt1_device = { + .name = "at91_rtt", + .id = 1, + .resource = rtt1_resources, + .num_resources = ARRAY_SIZE(rtt1_resources), +}; + +static void __init at91_add_device_rtt(void) +{ + platform_device_register(&at91sam9263_rtt0_device); + platform_device_register(&at91sam9263_rtt1_device); +} + + +/* -------------------------------------------------------------------- + * Watchdog + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) +static struct platform_device at91sam9263_wdt_device = { + .name = "at91_wdt", + .id = -1, + .num_resources = 0, +}; + +static void __init at91_add_device_watchdog(void) +{ + platform_device_register(&at91sam9263_wdt_device); +} +#else +static void __init at91_add_device_watchdog(void) {} +#endif + + /* -------------------------------------------------------------------- * LEDs * -------------------------------------------------------------------- */ @@ -1021,6 +1082,8 @@ void __init at91_add_device_serial(void) {} */ static int __init at91_add_standard_devices(void) { + at91_add_device_rtt(); + at91_add_device_watchdog(); return 0; } diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 2bd60a3dc623..19ca71d3faab 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -383,6 +383,71 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {} #endif +/* -------------------------------------------------------------------- + * RTC + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE) +static struct platform_device at91sam9rl_rtc_device = { + .name = "at91_rtc", + .id = -1, + .num_resources = 0, +}; + +static void __init at91_add_device_rtc(void) +{ + platform_device_register(&at91sam9rl_rtc_device); +} +#else +static void __init at91_add_device_rtc(void) {} +#endif + + +/* -------------------------------------------------------------------- + * RTT + * -------------------------------------------------------------------- */ + +static struct resource rtt_resources[] = { + { + .start = AT91_BASE_SYS + AT91_RTT, + .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device at91sam9rl_rtt_device = { + .name = "at91_rtt", + .id = -1, + .resource = rtt_resources, + .num_resources = ARRAY_SIZE(rtt_resources), +}; + +static void __init at91_add_device_rtt(void) +{ + platform_device_register(&at91sam9rl_rtt_device); +} + + +/* -------------------------------------------------------------------- + * Watchdog + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) +static struct platform_device at91sam9rl_wdt_device = { + .name = "at91_wdt", + .id = -1, + .num_resources = 0, +}; + +static void __init at91_add_device_watchdog(void) +{ + platform_device_register(&at91sam9rl_wdt_device); +} +#else +static void __init at91_add_device_watchdog(void) {} +#endif + + /* -------------------------------------------------------------------- * LEDs * -------------------------------------------------------------------- */ @@ -659,6 +724,9 @@ void __init at91_add_device_serial(void) {} */ static int __init at91_add_standard_devices(void) { + at91_add_device_rtc(); + at91_add_device_rtt(); + at91_add_device_watchdog(); return 0; } diff --git a/include/asm-arm/arch-at91/at91_rtt.h b/include/asm-arm/arch-at91/at91_rtt.h index bae1103fbbb2..39a32633b275 100644 --- a/include/asm-arm/arch-at91/at91_rtt.h +++ b/include/asm-arm/arch-at91/at91_rtt.h @@ -13,19 +13,19 @@ #ifndef AT91_RTT_H #define AT91_RTT_H -#define AT91_RTT_MR (AT91_RTT + 0x00) /* Real-time Mode Register */ +#define AT91_RTT_MR 0x00 /* Real-time Mode Register */ #define AT91_RTT_RTPRES (0xffff << 0) /* Real-time Timer Prescaler Value */ #define AT91_RTT_ALMIEN (1 << 16) /* Alarm Interrupt Enable */ #define AT91_RTT_RTTINCIEN (1 << 17) /* Real Time Timer Increment Interrupt Enable */ #define AT91_RTT_RTTRST (1 << 18) /* Real Time Timer Restart */ -#define AT91_RTT_AR (AT91_RTT + 0x04) /* Real-time Alarm Register */ +#define AT91_RTT_AR 0x04 /* Real-time Alarm Register */ #define AT91_RTT_ALMV (0xffffffff) /* Alarm Value */ -#define AT91_RTT_VR (AT91_RTT + 0x08) /* Real-time Value Register */ +#define AT91_RTT_VR 0x08 /* Real-time Value Register */ #define AT91_RTT_CRTV (0xffffffff) /* Current Real-time Value */ -#define AT91_RTT_SR (AT91_RTT + 0x0c) /* Real-time Status Register */ +#define AT91_RTT_SR 0x0c /* Real-time Status Register */ #define AT91_RTT_ALMS (1 << 0) /* Real-time Alarm Status */ #define AT91_RTT_RTTINC (1 << 1) /* Real-time Timer Increment */ -- cgit v1.2.3-59-g8ed1b From c6686ff9df086f9473663c2e61c1173c56788b2e Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Wed, 23 Jan 2008 09:13:53 +0100 Subject: [ARM] 4753/1: [AT91] Use DMA_BIT_MASK Replace hard-coded DMA mask (0xffffffff) with DMA_BIT_MASK(32) as defined in dma-mapping.h. Set "dma_mask" field for the UART platform_devices. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/at91rm9200_devices.c | 54 +++++++++++++++--------- arch/arm/mach-at91/at91sam9260_devices.c | 70 +++++++++++++++++++++----------- arch/arm/mach-at91/at91sam9261_devices.c | 49 ++++++++++++++-------- arch/arm/mach-at91/at91sam9263_devices.c | 59 ++++++++++++++++----------- arch/arm/mach-at91/at91sam9rl_devices.c | 50 +++++++++++++++-------- 5 files changed, 181 insertions(+), 101 deletions(-) diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 9296833f91cc..a601c7c1670e 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -13,6 +13,7 @@ #include #include +#include #include #include @@ -29,7 +30,7 @@ * -------------------------------------------------------------------- */ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = 0xffffffffUL; +static u64 ohci_dmamask = DMA_BIT_MASK(32); static struct at91_usbh_data usbh_data; static struct resource usbh_resources[] = { @@ -50,7 +51,7 @@ static struct platform_device at91rm9200_usbh_device = { .id = -1, .dev = { .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &usbh_data, }, .resource = usbh_resources, @@ -125,7 +126,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE) -static u64 eth_dmamask = 0xffffffffUL; +static u64 eth_dmamask = DMA_BIT_MASK(32); static struct at91_eth_data eth_data; static struct resource eth_resources[] = { @@ -146,7 +147,7 @@ static struct platform_device at91rm9200_eth_device = { .id = -1, .dev = { .dma_mask = ð_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = ð_data, }, .resource = eth_resources, @@ -285,7 +286,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -static u64 mmc_dmamask = 0xffffffffUL; +static u64 mmc_dmamask = DMA_BIT_MASK(32); static struct at91_mmc_data mmc_data; static struct resource mmc_resources[] = { @@ -306,7 +307,7 @@ static struct platform_device at91rm9200_mmc_device = { .id = -1, .dev = { .dma_mask = &mmc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &mmc_data, }, .resource = mmc_resources, @@ -513,7 +514,7 @@ void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) * -------------------------------------------------------------------- */ #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = 0xffffffffUL; +static u64 spi_dmamask = DMA_BIT_MASK(32); static struct resource spi_resources[] = { [0] = { @@ -533,7 +534,7 @@ static struct platform_device at91rm9200_spi_device = { .id = 0, .dev = { .dma_mask = &spi_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = spi_resources, .num_resources = ARRAY_SIZE(spi_resources), @@ -658,12 +659,15 @@ static struct atmel_uart_data dbgu_data = { .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; +static u64 dbgu_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91rm9200_dbgu_device = { .name = "atmel_usart", .id = 0, .dev = { - .platform_data = &dbgu_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &dbgu_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &dbgu_data, }, .resource = dbgu_resources, .num_resources = ARRAY_SIZE(dbgu_resources), @@ -693,12 +697,15 @@ static struct atmel_uart_data uart0_data = { .use_dma_rx = 1, }; +static u64 uart0_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91rm9200_uart0_device = { .name = "atmel_usart", .id = 1, .dev = { - .platform_data = &uart0_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart0_data, }, .resource = uart0_resources, .num_resources = ARRAY_SIZE(uart0_resources), @@ -735,12 +742,15 @@ static struct atmel_uart_data uart1_data = { .use_dma_rx = 1, }; +static u64 uart1_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91rm9200_uart1_device = { .name = "atmel_usart", .id = 2, .dev = { - .platform_data = &uart1_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart1_data, }, .resource = uart1_resources, .num_resources = ARRAY_SIZE(uart1_resources), @@ -776,12 +786,15 @@ static struct atmel_uart_data uart2_data = { .use_dma_rx = 1, }; +static u64 uart2_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91rm9200_uart2_device = { .name = "atmel_usart", .id = 3, .dev = { - .platform_data = &uart2_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart2_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart2_data, }, .resource = uart2_resources, .num_resources = ARRAY_SIZE(uart2_resources), @@ -811,12 +824,15 @@ static struct atmel_uart_data uart3_data = { .use_dma_rx = 1, }; +static u64 uart3_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91rm9200_uart3_device = { .name = "atmel_usart", .id = 4, .dev = { - .platform_data = &uart3_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart3_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart3_data, }, .resource = uart3_resources, .num_resources = ARRAY_SIZE(uart3_resources), @@ -828,7 +844,7 @@ static inline void configure_usart3_pins(void) at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */ } -struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ void __init at91_init_serial(struct at91_uart_config *config) diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 1533556fb873..c34fde362ad4 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -12,6 +12,7 @@ #include #include +#include #include #include @@ -29,7 +30,7 @@ * -------------------------------------------------------------------- */ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = 0xffffffffUL; +static u64 ohci_dmamask = DMA_BIT_MASK(32); static struct at91_usbh_data usbh_data; static struct resource usbh_resources[] = { @@ -50,7 +51,7 @@ static struct platform_device at91_usbh_device = { .id = -1, .dev = { .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &usbh_data, }, .resource = usbh_resources, @@ -125,7 +126,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) -static u64 eth_dmamask = 0xffffffffUL; +static u64 eth_dmamask = DMA_BIT_MASK(32); static struct at91_eth_data eth_data; static struct resource eth_resources[] = { @@ -146,7 +147,7 @@ static struct platform_device at91sam9260_eth_device = { .id = -1, .dev = { .dma_mask = ð_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = ð_data, }, .resource = eth_resources, @@ -199,7 +200,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -static u64 mmc_dmamask = 0xffffffffUL; +static u64 mmc_dmamask = DMA_BIT_MASK(32); static struct at91_mmc_data mmc_data; static struct resource mmc_resources[] = { @@ -220,7 +221,7 @@ static struct platform_device at91sam9260_mmc_device = { .id = -1, .dev = { .dma_mask = &mmc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &mmc_data, }, .resource = mmc_resources, @@ -431,7 +432,7 @@ void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) * -------------------------------------------------------------------- */ #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = 0xffffffffUL; +static u64 spi_dmamask = DMA_BIT_MASK(32); static struct resource spi0_resources[] = { [0] = { @@ -451,7 +452,7 @@ static struct platform_device at91sam9260_spi0_device = { .id = 0, .dev = { .dma_mask = &spi_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = spi0_resources, .num_resources = ARRAY_SIZE(spi0_resources), @@ -477,7 +478,7 @@ static struct platform_device at91sam9260_spi1_device = { .id = 1, .dev = { .dma_mask = &spi_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = spi1_resources, .num_resources = ARRAY_SIZE(spi1_resources), @@ -628,12 +629,15 @@ static struct atmel_uart_data dbgu_data = { .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; +static u64 dbgu_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9260_dbgu_device = { .name = "atmel_usart", .id = 0, .dev = { - .platform_data = &dbgu_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &dbgu_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &dbgu_data, }, .resource = dbgu_resources, .num_resources = ARRAY_SIZE(dbgu_resources), @@ -663,12 +667,15 @@ static struct atmel_uart_data uart0_data = { .use_dma_rx = 1, }; +static u64 uart0_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9260_uart0_device = { .name = "atmel_usart", .id = 1, .dev = { - .platform_data = &uart0_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart0_data, }, .resource = uart0_resources, .num_resources = ARRAY_SIZE(uart0_resources), @@ -704,12 +711,15 @@ static struct atmel_uart_data uart1_data = { .use_dma_rx = 1, }; +static u64 uart1_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9260_uart1_device = { .name = "atmel_usart", .id = 2, .dev = { - .platform_data = &uart1_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart1_data, }, .resource = uart1_resources, .num_resources = ARRAY_SIZE(uart1_resources), @@ -741,12 +751,15 @@ static struct atmel_uart_data uart2_data = { .use_dma_rx = 1, }; +static u64 uart2_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9260_uart2_device = { .name = "atmel_usart", .id = 3, .dev = { - .platform_data = &uart2_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart2_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart2_data, }, .resource = uart2_resources, .num_resources = ARRAY_SIZE(uart2_resources), @@ -776,12 +789,15 @@ static struct atmel_uart_data uart3_data = { .use_dma_rx = 1, }; +static u64 uart3_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9260_uart3_device = { .name = "atmel_usart", .id = 4, .dev = { - .platform_data = &uart3_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart3_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart3_data, }, .resource = uart3_resources, .num_resources = ARRAY_SIZE(uart3_resources), @@ -811,12 +827,15 @@ static struct atmel_uart_data uart4_data = { .use_dma_rx = 1, }; +static u64 uart4_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9260_uart4_device = { .name = "atmel_usart", .id = 5, .dev = { - .platform_data = &uart4_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart4_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart4_data, }, .resource = uart4_resources, .num_resources = ARRAY_SIZE(uart4_resources), @@ -846,12 +865,15 @@ static struct atmel_uart_data uart5_data = { .use_dma_rx = 1, }; +static u64 uart5_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9260_uart5_device = { .name = "atmel_usart", .id = 6, .dev = { - .platform_data = &uart5_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart5_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart5_data, }, .resource = uart5_resources, .num_resources = ARRAY_SIZE(uart5_resources), @@ -863,7 +885,7 @@ static inline void configure_usart5_pins(void) at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */ } -struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ void __init at91_init_serial(struct at91_uart_config *config) diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 17f3f6a24796..f7f02d15045d 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -13,6 +13,7 @@ #include #include +#include #include #include @@ -33,7 +34,7 @@ * -------------------------------------------------------------------- */ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = 0xffffffffUL; +static u64 ohci_dmamask = DMA_BIT_MASK(32); static struct at91_usbh_data usbh_data; static struct resource usbh_resources[] = { @@ -54,7 +55,7 @@ static struct platform_device at91sam9261_usbh_device = { .id = -1, .dev = { .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &usbh_data, }, .resource = usbh_resources, @@ -132,7 +133,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -static u64 mmc_dmamask = 0xffffffffUL; +static u64 mmc_dmamask = DMA_BIT_MASK(32); static struct at91_mmc_data mmc_data; static struct resource mmc_resources[] = { @@ -153,7 +154,7 @@ static struct platform_device at91sam9261_mmc_device = { .id = -1, .dev = { .dma_mask = &mmc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &mmc_data, }, .resource = mmc_resources, @@ -354,7 +355,7 @@ void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) * -------------------------------------------------------------------- */ #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = 0xffffffffUL; +static u64 spi_dmamask = DMA_BIT_MASK(32); static struct resource spi0_resources[] = { [0] = { @@ -374,7 +375,7 @@ static struct platform_device at91sam9261_spi0_device = { .id = 0, .dev = { .dma_mask = &spi_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = spi0_resources, .num_resources = ARRAY_SIZE(spi0_resources), @@ -400,7 +401,7 @@ static struct platform_device at91sam9261_spi1_device = { .id = 1, .dev = { .dma_mask = &spi_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = spi1_resources, .num_resources = ARRAY_SIZE(spi1_resources), @@ -466,7 +467,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) * -------------------------------------------------------------------- */ #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -static u64 lcdc_dmamask = 0xffffffffUL; +static u64 lcdc_dmamask = DMA_BIT_MASK(32); static struct atmel_lcdfb_info lcdc_data; static struct resource lcdc_resources[] = { @@ -494,7 +495,7 @@ static struct platform_device at91_lcdc_device = { .id = 0, .dev = { .dma_mask = &lcdc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &lcdc_data, }, .resource = lcdc_resources, @@ -641,12 +642,15 @@ static struct atmel_uart_data dbgu_data = { .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; +static u64 dbgu_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9261_dbgu_device = { .name = "atmel_usart", .id = 0, .dev = { - .platform_data = &dbgu_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &dbgu_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &dbgu_data, }, .resource = dbgu_resources, .num_resources = ARRAY_SIZE(dbgu_resources), @@ -676,12 +680,15 @@ static struct atmel_uart_data uart0_data = { .use_dma_rx = 1, }; +static u64 uart0_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9261_uart0_device = { .name = "atmel_usart", .id = 1, .dev = { - .platform_data = &uart0_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart0_data, }, .resource = uart0_resources, .num_resources = ARRAY_SIZE(uart0_resources), @@ -713,12 +720,15 @@ static struct atmel_uart_data uart1_data = { .use_dma_rx = 1, }; +static u64 uart1_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9261_uart1_device = { .name = "atmel_usart", .id = 2, .dev = { - .platform_data = &uart1_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart1_data, }, .resource = uart1_resources, .num_resources = ARRAY_SIZE(uart1_resources), @@ -748,12 +758,15 @@ static struct atmel_uart_data uart2_data = { .use_dma_rx = 1, }; +static u64 uart2_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9261_uart2_device = { .name = "atmel_usart", .id = 3, .dev = { - .platform_data = &uart2_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart2_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart2_data, }, .resource = uart2_resources, .num_resources = ARRAY_SIZE(uart2_resources), @@ -765,7 +778,7 @@ static inline void configure_usart2_pins(void) at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */ } -struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ void __init at91_init_serial(struct at91_uart_config *config) diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index b4eb21769db9..9bdcf45defcf 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -12,6 +12,7 @@ #include #include +#include #include #include @@ -32,7 +33,7 @@ * -------------------------------------------------------------------- */ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = 0xffffffffUL; +static u64 ohci_dmamask = DMA_BIT_MASK(32); static struct at91_usbh_data usbh_data; static struct resource usbh_resources[] = { @@ -53,7 +54,7 @@ static struct platform_device at91_usbh_device = { .id = -1, .dev = { .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &usbh_data, }, .resource = usbh_resources, @@ -136,7 +137,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) -static u64 eth_dmamask = 0xffffffffUL; +static u64 eth_dmamask = DMA_BIT_MASK(32); static struct at91_eth_data eth_data; static struct resource eth_resources[] = { @@ -157,7 +158,7 @@ static struct platform_device at91sam9263_eth_device = { .id = -1, .dev = { .dma_mask = ð_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = ð_data, }, .resource = eth_resources, @@ -210,7 +211,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -static u64 mmc_dmamask = 0xffffffffUL; +static u64 mmc_dmamask = DMA_BIT_MASK(32); static struct at91_mmc_data mmc0_data, mmc1_data; static struct resource mmc0_resources[] = { @@ -231,7 +232,7 @@ static struct platform_device at91sam9263_mmc0_device = { .id = 0, .dev = { .dma_mask = &mmc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &mmc0_data, }, .resource = mmc0_resources, @@ -256,7 +257,7 @@ static struct platform_device at91sam9263_mmc1_device = { .id = 1, .dev = { .dma_mask = &mmc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &mmc1_data, }, .resource = mmc1_resources, @@ -500,7 +501,7 @@ void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) * -------------------------------------------------------------------- */ #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = 0xffffffffUL; +static u64 spi_dmamask = DMA_BIT_MASK(32); static struct resource spi0_resources[] = { [0] = { @@ -520,7 +521,7 @@ static struct platform_device at91sam9263_spi0_device = { .id = 0, .dev = { .dma_mask = &spi_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = spi0_resources, .num_resources = ARRAY_SIZE(spi0_resources), @@ -546,7 +547,7 @@ static struct platform_device at91sam9263_spi1_device = { .id = 1, .dev = { .dma_mask = &spi_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = spi1_resources, .num_resources = ARRAY_SIZE(spi1_resources), @@ -612,7 +613,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) * -------------------------------------------------------------------- */ #if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE) -static u64 ac97_dmamask = 0xffffffffUL; +static u64 ac97_dmamask = DMA_BIT_MASK(32); static struct atmel_ac97_data ac97_data; static struct resource ac97_resources[] = { @@ -633,7 +634,7 @@ static struct platform_device at91sam9263_ac97_device = { .id = 1, .dev = { .dma_mask = &ac97_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &ac97_data, }, .resource = ac97_resources, @@ -667,7 +668,7 @@ void __init at91_add_device_ac97(struct atmel_ac97_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -static u64 lcdc_dmamask = 0xffffffffUL; +static u64 lcdc_dmamask = DMA_BIT_MASK(32); static struct atmel_lcdfb_info lcdc_data; static struct resource lcdc_resources[] = { @@ -688,7 +689,7 @@ static struct platform_device at91_lcdc_device = { .id = 0, .dev = { .dma_mask = &lcdc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &lcdc_data, }, .resource = lcdc_resources, @@ -889,12 +890,15 @@ static struct atmel_uart_data dbgu_data = { .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; +static u64 dbgu_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9263_dbgu_device = { .name = "atmel_usart", .id = 0, .dev = { - .platform_data = &dbgu_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &dbgu_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &dbgu_data, }, .resource = dbgu_resources, .num_resources = ARRAY_SIZE(dbgu_resources), @@ -924,12 +928,15 @@ static struct atmel_uart_data uart0_data = { .use_dma_rx = 1, }; +static u64 uart0_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9263_uart0_device = { .name = "atmel_usart", .id = 1, .dev = { - .platform_data = &uart0_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart0_data, }, .resource = uart0_resources, .num_resources = ARRAY_SIZE(uart0_resources), @@ -961,12 +968,15 @@ static struct atmel_uart_data uart1_data = { .use_dma_rx = 1, }; +static u64 uart1_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9263_uart1_device = { .name = "atmel_usart", .id = 2, .dev = { - .platform_data = &uart1_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart1_data, }, .resource = uart1_resources, .num_resources = ARRAY_SIZE(uart1_resources), @@ -998,12 +1008,15 @@ static struct atmel_uart_data uart2_data = { .use_dma_rx = 1, }; +static u64 uart2_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9263_uart2_device = { .name = "atmel_usart", .id = 3, .dev = { - .platform_data = &uart2_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart2_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart2_data, }, .resource = uart2_resources, .num_resources = ARRAY_SIZE(uart2_resources), @@ -1017,7 +1030,7 @@ static inline void configure_usart2_pins(void) at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ } -struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ void __init at91_init_serial(struct at91_uart_config *config) diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 19ca71d3faab..bec8066f9ba1 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -9,6 +9,7 @@ #include #include +#include #include #include @@ -29,7 +30,7 @@ * -------------------------------------------------------------------- */ #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -static u64 mmc_dmamask = 0xffffffffUL; +static u64 mmc_dmamask = DMA_BIT_MASK(32); static struct at91_mmc_data mmc_data; static struct resource mmc_resources[] = { @@ -50,7 +51,7 @@ static struct platform_device at91sam9rl_mmc_device = { .id = -1, .dev = { .dma_mask = &mmc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &mmc_data, }, .resource = mmc_resources, @@ -247,7 +248,7 @@ void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) * -------------------------------------------------------------------- */ #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = 0xffffffffUL; +static u64 spi_dmamask = DMA_BIT_MASK(32); static struct resource spi_resources[] = { [0] = { @@ -267,7 +268,7 @@ static struct platform_device at91sam9rl_spi_device = { .id = 0, .dev = { .dma_mask = &spi_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = spi_resources, .num_resources = ARRAY_SIZE(spi_resources), @@ -312,7 +313,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) * -------------------------------------------------------------------- */ #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE) -static u64 lcdc_dmamask = 0xffffffffUL; +static u64 lcdc_dmamask = DMA_BIT_MASK(32); static struct atmel_lcdfb_info lcdc_data; static struct resource lcdc_resources[] = { @@ -340,7 +341,7 @@ static struct platform_device at91_lcdc_device = { .id = 0, .dev = { .dma_mask = &lcdc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &lcdc_data, }, .resource = lcdc_resources, @@ -494,12 +495,15 @@ static struct atmel_uart_data dbgu_data = { .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), }; +static u64 dbgu_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9rl_dbgu_device = { .name = "atmel_usart", .id = 0, .dev = { - .platform_data = &dbgu_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &dbgu_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &dbgu_data, }, .resource = dbgu_resources, .num_resources = ARRAY_SIZE(dbgu_resources), @@ -529,12 +533,15 @@ static struct atmel_uart_data uart0_data = { .use_dma_rx = 1, }; +static u64 uart0_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9rl_uart0_device = { .name = "atmel_usart", .id = 1, .dev = { - .platform_data = &uart0_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart0_data, }, .resource = uart0_resources, .num_resources = ARRAY_SIZE(uart0_resources), @@ -566,12 +573,15 @@ static struct atmel_uart_data uart1_data = { .use_dma_rx = 1, }; +static u64 uart1_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9rl_uart1_device = { .name = "atmel_usart", .id = 2, .dev = { - .platform_data = &uart1_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart1_data, }, .resource = uart1_resources, .num_resources = ARRAY_SIZE(uart1_resources), @@ -601,12 +611,15 @@ static struct atmel_uart_data uart2_data = { .use_dma_rx = 1, }; +static u64 uart2_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9rl_uart2_device = { .name = "atmel_usart", .id = 3, .dev = { - .platform_data = &uart2_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart2_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart2_data, }, .resource = uart2_resources, .num_resources = ARRAY_SIZE(uart2_resources), @@ -636,12 +649,15 @@ static struct atmel_uart_data uart3_data = { .use_dma_rx = 1, }; +static u64 uart3_dmamask = DMA_BIT_MASK(32); + static struct platform_device at91sam9rl_uart3_device = { .name = "atmel_usart", .id = 4, .dev = { - .platform_data = &uart3_data, - .coherent_dma_mask = 0xffffffff, + .dma_mask = &uart3_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &uart3_data, }, .resource = uart3_resources, .num_resources = ARRAY_SIZE(uart3_resources), @@ -653,7 +669,7 @@ static inline void configure_usart3_pins(void) at91_set_A_periph(AT91_PIN_PB1, 0); /* RXD3 */ } -struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ +static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ void __init at91_init_serial(struct at91_uart_config *config) -- cgit v1.2.3-59-g8ed1b From bfbc32663d4846039f88c0eccc1956587d89c042 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Wed, 23 Jan 2008 09:18:06 +0100 Subject: [ARM] 4754/1: [AT91] SSC library support Core support of the Atmel SSC library for all Atmel AT91 processors. Based on David Brownell's initial patch for the AT91RM9200. Signed-off-by: Andrew Victor Acked-by: David Brownell Signed-off-by: Russell King --- arch/arm/mach-at91/at91rm9200_devices.c | 173 +++++++++++++++++++++++++++++++ arch/arm/mach-at91/at91sam9260_devices.c | 79 ++++++++++++++ arch/arm/mach-at91/at91sam9261_devices.c | 173 +++++++++++++++++++++++++++++++ arch/arm/mach-at91/at91sam9263_devices.c | 129 +++++++++++++++++++++++ arch/arm/mach-at91/at91sam9rl_devices.c | 129 +++++++++++++++++++++++ include/asm-arm/arch-at91/board.h | 17 +++ 6 files changed, 700 insertions(+) diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index a601c7c1670e..cebea4168778 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -635,6 +635,179 @@ void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} #endif +/* -------------------------------------------------------------------- + * SSC -- Synchronous Serial Controller + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) +static u64 ssc0_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc0_resources[] = { + [0] = { + .start = AT91RM9200_BASE_SSC0, + .end = AT91RM9200_BASE_SSC0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91RM9200_ID_SSC0, + .end = AT91RM9200_ID_SSC0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91rm9200_ssc0_device = { + .name = "ssc", + .id = 0, + .dev = { + .dma_mask = &ssc0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc0_resources, + .num_resources = ARRAY_SIZE(ssc0_resources), +}; + +static inline void configure_ssc0_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_A_periph(AT91_PIN_PB0, 1); + if (pins & ATMEL_SSC_TK) + at91_set_A_periph(AT91_PIN_PB1, 1); + if (pins & ATMEL_SSC_TD) + at91_set_A_periph(AT91_PIN_PB2, 1); + if (pins & ATMEL_SSC_RD) + at91_set_A_periph(AT91_PIN_PB3, 1); + if (pins & ATMEL_SSC_RK) + at91_set_A_periph(AT91_PIN_PB4, 1); + if (pins & ATMEL_SSC_RF) + at91_set_A_periph(AT91_PIN_PB5, 1); +} + +static u64 ssc1_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc1_resources[] = { + [0] = { + .start = AT91RM9200_BASE_SSC1, + .end = AT91RM9200_BASE_SSC1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91RM9200_ID_SSC1, + .end = AT91RM9200_ID_SSC1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91rm9200_ssc1_device = { + .name = "ssc", + .id = 1, + .dev = { + .dma_mask = &ssc1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc1_resources, + .num_resources = ARRAY_SIZE(ssc1_resources), +}; + +static inline void configure_ssc1_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_A_periph(AT91_PIN_PB6, 1); + if (pins & ATMEL_SSC_TK) + at91_set_A_periph(AT91_PIN_PB7, 1); + if (pins & ATMEL_SSC_TD) + at91_set_A_periph(AT91_PIN_PB8, 1); + if (pins & ATMEL_SSC_RD) + at91_set_A_periph(AT91_PIN_PB9, 1); + if (pins & ATMEL_SSC_RK) + at91_set_A_periph(AT91_PIN_PB10, 1); + if (pins & ATMEL_SSC_RF) + at91_set_A_periph(AT91_PIN_PB11, 1); +} + +static u64 ssc2_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc2_resources[] = { + [0] = { + .start = AT91RM9200_BASE_SSC2, + .end = AT91RM9200_BASE_SSC2 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91RM9200_ID_SSC2, + .end = AT91RM9200_ID_SSC2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91rm9200_ssc2_device = { + .name = "ssc", + .id = 2, + .dev = { + .dma_mask = &ssc2_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc2_resources, + .num_resources = ARRAY_SIZE(ssc2_resources), +}; + +static inline void configure_ssc2_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_A_periph(AT91_PIN_PB12, 1); + if (pins & ATMEL_SSC_TK) + at91_set_A_periph(AT91_PIN_PB13, 1); + if (pins & ATMEL_SSC_TD) + at91_set_A_periph(AT91_PIN_PB14, 1); + if (pins & ATMEL_SSC_RD) + at91_set_A_periph(AT91_PIN_PB15, 1); + if (pins & ATMEL_SSC_RK) + at91_set_A_periph(AT91_PIN_PB16, 1); + if (pins & ATMEL_SSC_RF) + at91_set_A_periph(AT91_PIN_PB17, 1); +} + +/* + * SSC controllers are accessed through library code, instead of any + * kind of all-singing/all-dancing driver. For example one could be + * used by a particular I2S audio codec's driver, while another one + * on the same system might be used by a custom data capture driver. + */ +void __init at91_add_device_ssc(unsigned id, unsigned pins) +{ + struct platform_device *pdev; + + /* + * NOTE: caller is responsible for passing information matching + * "pins" to whatever will be using each particular controller. + */ + switch (id) { + case AT91RM9200_ID_SSC0: + pdev = &at91rm9200_ssc0_device; + configure_ssc0_pins(pins); + at91_clock_associate("ssc0_clk", &pdev->dev, "ssc"); + break; + case AT91RM9200_ID_SSC1: + pdev = &at91rm9200_ssc1_device; + configure_ssc1_pins(pins); + at91_clock_associate("ssc1_clk", &pdev->dev, "ssc"); + break; + case AT91RM9200_ID_SSC2: + pdev = &at91rm9200_ssc2_device; + configure_ssc2_pins(pins); + at91_clock_associate("ssc2_clk", &pdev->dev, "ssc"); + break; + default: + return; + } + + platform_device_register(pdev); +} + +#else +void __init at91_add_device_ssc(unsigned id, unsigned pins) {} +#endif + + /* -------------------------------------------------------------------- * UART * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index c34fde362ad4..2e3db137bc49 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -606,6 +606,85 @@ void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} #endif +/* -------------------------------------------------------------------- + * SSC -- Synchronous Serial Controller + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) +static u64 ssc_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc_resources[] = { + [0] = { + .start = AT91SAM9260_BASE_SSC, + .end = AT91SAM9260_BASE_SSC + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9260_ID_SSC, + .end = AT91SAM9260_ID_SSC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9260_ssc_device = { + .name = "ssc", + .id = 0, + .dev = { + .dma_mask = &ssc_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc_resources, + .num_resources = ARRAY_SIZE(ssc_resources), +}; + +static inline void configure_ssc_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_A_periph(AT91_PIN_PB17, 1); + if (pins & ATMEL_SSC_TK) + at91_set_A_periph(AT91_PIN_PB16, 1); + if (pins & ATMEL_SSC_TD) + at91_set_A_periph(AT91_PIN_PB18, 1); + if (pins & ATMEL_SSC_RD) + at91_set_A_periph(AT91_PIN_PB19, 1); + if (pins & ATMEL_SSC_RK) + at91_set_A_periph(AT91_PIN_PB20, 1); + if (pins & ATMEL_SSC_RF) + at91_set_A_periph(AT91_PIN_PB21, 1); +} + +/* + * SSC controllers are accessed through library code, instead of any + * kind of all-singing/all-dancing driver. For example one could be + * used by a particular I2S audio codec's driver, while another one + * on the same system might be used by a custom data capture driver. + */ +void __init at91_add_device_ssc(unsigned id, unsigned pins) +{ + struct platform_device *pdev; + + /* + * NOTE: caller is responsible for passing information matching + * "pins" to whatever will be using each particular controller. + */ + switch (id) { + case AT91SAM9260_ID_SSC: + pdev = &at91sam9260_ssc_device; + configure_ssc_pins(pins); + at91_clock_associate("ssc_clk", &pdev->dev, "pclk"); + break; + default: + return; + } + + platform_device_register(pdev); +} + +#else +void __init at91_add_device_ssc(unsigned id, unsigned pins) {} +#endif + + /* -------------------------------------------------------------------- * UART * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index f7f02d15045d..266ccf01be53 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -618,6 +618,179 @@ void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} #endif +/* -------------------------------------------------------------------- + * SSC -- Synchronous Serial Controller + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) +static u64 ssc0_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc0_resources[] = { + [0] = { + .start = AT91SAM9261_BASE_SSC0, + .end = AT91SAM9261_BASE_SSC0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9261_ID_SSC0, + .end = AT91SAM9261_ID_SSC0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9261_ssc0_device = { + .name = "ssc", + .id = 0, + .dev = { + .dma_mask = &ssc0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc0_resources, + .num_resources = ARRAY_SIZE(ssc0_resources), +}; + +static inline void configure_ssc0_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_A_periph(AT91_PIN_PB21, 1); + if (pins & ATMEL_SSC_TK) + at91_set_A_periph(AT91_PIN_PB22, 1); + if (pins & ATMEL_SSC_TD) + at91_set_A_periph(AT91_PIN_PB23, 1); + if (pins & ATMEL_SSC_RD) + at91_set_A_periph(AT91_PIN_PB24, 1); + if (pins & ATMEL_SSC_RK) + at91_set_A_periph(AT91_PIN_PB25, 1); + if (pins & ATMEL_SSC_RF) + at91_set_A_periph(AT91_PIN_PB26, 1); +} + +static u64 ssc1_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc1_resources[] = { + [0] = { + .start = AT91SAM9261_BASE_SSC1, + .end = AT91SAM9261_BASE_SSC1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9261_ID_SSC1, + .end = AT91SAM9261_ID_SSC1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9261_ssc1_device = { + .name = "ssc", + .id = 1, + .dev = { + .dma_mask = &ssc1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc1_resources, + .num_resources = ARRAY_SIZE(ssc1_resources), +}; + +static inline void configure_ssc1_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_B_periph(AT91_PIN_PA17, 1); + if (pins & ATMEL_SSC_TK) + at91_set_B_periph(AT91_PIN_PA18, 1); + if (pins & ATMEL_SSC_TD) + at91_set_B_periph(AT91_PIN_PA19, 1); + if (pins & ATMEL_SSC_RD) + at91_set_B_periph(AT91_PIN_PA20, 1); + if (pins & ATMEL_SSC_RK) + at91_set_B_periph(AT91_PIN_PA21, 1); + if (pins & ATMEL_SSC_RF) + at91_set_B_periph(AT91_PIN_PA22, 1); +} + +static u64 ssc2_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc2_resources[] = { + [0] = { + .start = AT91SAM9261_BASE_SSC2, + .end = AT91SAM9261_BASE_SSC2 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9261_ID_SSC2, + .end = AT91SAM9261_ID_SSC2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9261_ssc2_device = { + .name = "ssc", + .id = 2, + .dev = { + .dma_mask = &ssc2_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc2_resources, + .num_resources = ARRAY_SIZE(ssc2_resources), +}; + +static inline void configure_ssc2_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_B_periph(AT91_PIN_PC25, 1); + if (pins & ATMEL_SSC_TK) + at91_set_B_periph(AT91_PIN_PC26, 1); + if (pins & ATMEL_SSC_TD) + at91_set_B_periph(AT91_PIN_PC27, 1); + if (pins & ATMEL_SSC_RD) + at91_set_B_periph(AT91_PIN_PC28, 1); + if (pins & ATMEL_SSC_RK) + at91_set_B_periph(AT91_PIN_PC29, 1); + if (pins & ATMEL_SSC_RF) + at91_set_B_periph(AT91_PIN_PC30, 1); +} + +/* + * SSC controllers are accessed through library code, instead of any + * kind of all-singing/all-dancing driver. For example one could be + * used by a particular I2S audio codec's driver, while another one + * on the same system might be used by a custom data capture driver. + */ +void __init at91_add_device_ssc(unsigned id, unsigned pins) +{ + struct platform_device *pdev; + + /* + * NOTE: caller is responsible for passing information matching + * "pins" to whatever will be using each particular controller. + */ + switch (id) { + case AT91SAM9261_ID_SSC0: + pdev = &at91sam9261_ssc0_device; + configure_ssc0_pins(pins); + at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); + break; + case AT91SAM9261_ID_SSC1: + pdev = &at91sam9261_ssc1_device; + configure_ssc1_pins(pins); + at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); + break; + case AT91SAM9261_ID_SSC2: + pdev = &at91sam9261_ssc2_device; + configure_ssc2_pins(pins); + at91_clock_associate("ssc2_clk", &pdev->dev, "pclk"); + break; + default: + return; + } + + platform_device_register(pdev); +} + +#else +void __init at91_add_device_ssc(unsigned id, unsigned pins) {} +#endif + + /* -------------------------------------------------------------------- * UART * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 9bdcf45defcf..f83ef62f2385 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -865,6 +865,135 @@ void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} #endif +/* -------------------------------------------------------------------- + * SSC -- Synchronous Serial Controller + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) +static u64 ssc0_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc0_resources[] = { + [0] = { + .start = AT91SAM9263_BASE_SSC0, + .end = AT91SAM9263_BASE_SSC0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9263_ID_SSC0, + .end = AT91SAM9263_ID_SSC0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9263_ssc0_device = { + .name = "ssc", + .id = 0, + .dev = { + .dma_mask = &ssc0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc0_resources, + .num_resources = ARRAY_SIZE(ssc0_resources), +}; + +static inline void configure_ssc0_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_B_periph(AT91_PIN_PB0, 1); + if (pins & ATMEL_SSC_TK) + at91_set_B_periph(AT91_PIN_PB1, 1); + if (pins & ATMEL_SSC_TD) + at91_set_B_periph(AT91_PIN_PB2, 1); + if (pins & ATMEL_SSC_RD) + at91_set_B_periph(AT91_PIN_PB3, 1); + if (pins & ATMEL_SSC_RK) + at91_set_B_periph(AT91_PIN_PB4, 1); + if (pins & ATMEL_SSC_RF) + at91_set_B_periph(AT91_PIN_PB5, 1); +} + +static u64 ssc1_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc1_resources[] = { + [0] = { + .start = AT91SAM9263_BASE_SSC1, + .end = AT91SAM9263_BASE_SSC1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9263_ID_SSC1, + .end = AT91SAM9263_ID_SSC1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9263_ssc1_device = { + .name = "ssc", + .id = 1, + .dev = { + .dma_mask = &ssc1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc1_resources, + .num_resources = ARRAY_SIZE(ssc1_resources), +}; + +static inline void configure_ssc1_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_A_periph(AT91_PIN_PB6, 1); + if (pins & ATMEL_SSC_TK) + at91_set_A_periph(AT91_PIN_PB7, 1); + if (pins & ATMEL_SSC_TD) + at91_set_A_periph(AT91_PIN_PB8, 1); + if (pins & ATMEL_SSC_RD) + at91_set_A_periph(AT91_PIN_PB9, 1); + if (pins & ATMEL_SSC_RK) + at91_set_A_periph(AT91_PIN_PB10, 1); + if (pins & ATMEL_SSC_RF) + at91_set_A_periph(AT91_PIN_PB11, 1); +} + +/* + * Return the device node so that board init code can use it as the + * parent for the device node reflecting how it's used on this board. + * + * SSC controllers are accessed through library code, instead of any + * kind of all-singing/all-dancing driver. For example one could be + * used by a particular I2S audio codec's driver, while another one + * on the same system might be used by a custom data capture driver. + */ +void __init at91_add_device_ssc(unsigned id, unsigned pins) +{ + struct platform_device *pdev; + + /* + * NOTE: caller is responsible for passing information matching + * "pins" to whatever will be using each particular controller. + */ + switch (id) { + case AT91SAM9263_ID_SSC0: + pdev = &at91sam9263_ssc0_device; + configure_ssc0_pins(pins); + at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); + break; + case AT91SAM9263_ID_SSC1: + pdev = &at91sam9263_ssc1_device; + configure_ssc1_pins(pins); + at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); + break; + default: + return; + } + + platform_device_register(pdev); +} + +#else +void __init at91_add_device_ssc(unsigned id, unsigned pins) {} +#endif + + /* -------------------------------------------------------------------- * UART * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index bec8066f9ba1..e886cdfe919d 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -471,6 +471,135 @@ void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} #endif +/* -------------------------------------------------------------------- + * SSC -- Synchronous Serial Controller + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE) +static u64 ssc0_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc0_resources[] = { + [0] = { + .start = AT91SAM9RL_BASE_SSC0, + .end = AT91SAM9RL_BASE_SSC0 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9RL_ID_SSC0, + .end = AT91SAM9RL_ID_SSC0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9rl_ssc0_device = { + .name = "ssc", + .id = 0, + .dev = { + .dma_mask = &ssc0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc0_resources, + .num_resources = ARRAY_SIZE(ssc0_resources), +}; + +static inline void configure_ssc0_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_A_periph(AT91_PIN_PC0, 1); + if (pins & ATMEL_SSC_TK) + at91_set_A_periph(AT91_PIN_PC1, 1); + if (pins & ATMEL_SSC_TD) + at91_set_A_periph(AT91_PIN_PA15, 1); + if (pins & ATMEL_SSC_RD) + at91_set_A_periph(AT91_PIN_PA16, 1); + if (pins & ATMEL_SSC_RK) + at91_set_B_periph(AT91_PIN_PA10, 1); + if (pins & ATMEL_SSC_RF) + at91_set_B_periph(AT91_PIN_PA22, 1); +} + +static u64 ssc1_dmamask = DMA_BIT_MASK(32); + +static struct resource ssc1_resources[] = { + [0] = { + .start = AT91SAM9RL_BASE_SSC1, + .end = AT91SAM9RL_BASE_SSC1 + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91SAM9RL_ID_SSC1, + .end = AT91SAM9RL_ID_SSC1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device at91sam9rl_ssc1_device = { + .name = "ssc", + .id = 1, + .dev = { + .dma_mask = &ssc1_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = ssc1_resources, + .num_resources = ARRAY_SIZE(ssc1_resources), +}; + +static inline void configure_ssc1_pins(unsigned pins) +{ + if (pins & ATMEL_SSC_TF) + at91_set_B_periph(AT91_PIN_PA29, 1); + if (pins & ATMEL_SSC_TK) + at91_set_B_periph(AT91_PIN_PA30, 1); + if (pins & ATMEL_SSC_TD) + at91_set_B_periph(AT91_PIN_PA13, 1); + if (pins & ATMEL_SSC_RD) + at91_set_B_periph(AT91_PIN_PA14, 1); + if (pins & ATMEL_SSC_RK) + at91_set_B_periph(AT91_PIN_PA9, 1); + if (pins & ATMEL_SSC_RF) + at91_set_B_periph(AT91_PIN_PA8, 1); +} + +/* + * Return the device node so that board init code can use it as the + * parent for the device node reflecting how it's used on this board. + * + * SSC controllers are accessed through library code, instead of any + * kind of all-singing/all-dancing driver. For example one could be + * used by a particular I2S audio codec's driver, while another one + * on the same system might be used by a custom data capture driver. + */ +void __init at91_add_device_ssc(unsigned id, unsigned pins) +{ + struct platform_device *pdev; + + /* + * NOTE: caller is responsible for passing information matching + * "pins" to whatever will be using each particular controller. + */ + switch (id) { + case AT91SAM9RL_ID_SSC0: + pdev = &at91sam9rl_ssc0_device; + configure_ssc0_pins(pins); + at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); + break; + case AT91SAM9RL_ID_SSC1: + pdev = &at91sam9rl_ssc1_device; + configure_ssc1_pins(pins); + at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); + break; + default: + return; + } + + platform_device_register(pdev); +} + +#else +void __init at91_add_device_ssc(unsigned id, unsigned pins) {} +#endif + + /* -------------------------------------------------------------------- * UART * -------------------------------------------------------------------- */ diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h index 762148cc48c1..7fefe018833c 100644 --- a/include/asm-arm/arch-at91/board.h +++ b/include/asm-arm/arch-at91/board.h @@ -116,6 +116,23 @@ struct atmel_uart_data { }; extern void __init at91_add_device_serial(void); +/* + * SSC -- accessed through ssc_request(id). Drivers don't bind to SSC + * platform devices. Their SSC ID is part of their configuration data, + * along with information about which SSC signals they should use. + */ +#define ATMEL_SSC_TK 0x01 +#define ATMEL_SSC_TF 0x02 +#define ATMEL_SSC_TD 0x04 +#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD) + +#define ATMEL_SSC_RK 0x10 +#define ATMEL_SSC_RF 0x20 +#define ATMEL_SSC_RD 0x40 +#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD) + +extern void __init at91_add_device_ssc(unsigned id, unsigned pins); + /* LCD Controller */ struct atmel_lcdfb_info; extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data); -- cgit v1.2.3-59-g8ed1b From 228235584f0dc1ab7f33f53d6cea8ee8a4d7f0da Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Wed, 23 Jan 2008 09:21:02 +0100 Subject: [ARM] 4755/1: [AT91] NAND update Map the complete memory region (SZ_256M) as is done on the other AT91 processors. The SMC_SMARTMEDIA bit should be set in the EBI controller to enable the hardware NAND logic. (Patch from Sascha Erlacher) Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/at91rm9200_devices.c | 2 +- arch/arm/mach-at91/at91sam9260_devices.c | 4 ++-- arch/arm/mach-at91/at91sam9261_devices.c | 2 +- arch/arm/mach-at91/at91sam9263_devices.c | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index cebea4168778..a2647265c214 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -376,7 +376,7 @@ static struct at91_nand_data nand_data; static struct resource nand_resources[] = { { .start = NAND_BASE, - .end = NAND_BASE + SZ_8M - 1, + .end = NAND_BASE + SZ_256M - 1, .flags = IORESOURCE_MEM, } }; diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 2e3db137bc49..8acd62b75cb0 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -290,7 +290,7 @@ static struct at91_nand_data nand_data; static struct resource nand_resources[] = { { .start = NAND_BASE, - .end = NAND_BASE + SZ_8M - 1, + .end = NAND_BASE + SZ_256M - 1, .flags = IORESOURCE_MEM, } }; @@ -313,7 +313,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data) return; csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC); + at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); /* set the bus interface characteristics */ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 266ccf01be53..ba84ba6f18fb 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -233,7 +233,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data) return; csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC); + at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); /* set the bus interface characteristics */ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index f83ef62f2385..c025f5c5ffaa 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -383,7 +383,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data) return; csa = at91_sys_read(AT91_MATRIX_EBI0CSA); - at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC); + at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA); /* set the bus interface characteristics */ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) -- cgit v1.2.3-59-g8ed1b From b7b272a8826a2332f689853792eb8c42477fec85 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Wed, 23 Jan 2008 09:23:09 +0100 Subject: [ARM] 4756/1: [AT91] Makefile cleanup Cleanup the main AT91 makefile. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/Makefile | 19 ++++++------------- 1 file changed, 6 insertions(+), 13 deletions(-) diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index a21f08c64ea6..a8a009c2cf7d 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -8,7 +8,6 @@ obj-n := obj- := obj-$(CONFIG_AT91_PMC_UNIT) += clock.o -obj-$(CONFIG_PM) += pm.o # CPU-specific support obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o @@ -29,7 +28,6 @@ obj-$(CONFIG_MACH_KB9200) += board-kb9202.o obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o obj-$(CONFIG_MACH_KAFA) += board-kafa.o obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o -obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o # AT91SAM9260 board-specific support obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o @@ -43,19 +41,14 @@ obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o # AT91SAM9RL board-specific support obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o -# LEDs support -led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o -led-$(CONFIG_MACH_AT91RM9200EK) += leds.o -led-$(CONFIG_MACH_AT91SAM9261EK)+= leds.o -led-$(CONFIG_MACH_CSB337) += leds.o -led-$(CONFIG_MACH_CSB637) += leds.o -led-$(CONFIG_MACH_KB9200) += leds.o -led-$(CONFIG_MACH_KAFA) += leds.o -obj-$(CONFIG_LEDS) += $(led-y) +# AT91X40 board-specific support +obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o -# VGA support -#obj-$(CONFIG_FB_S1D13XXX) += ics1523.o +# Drivers +obj-$(CONFIG_LEDS) += leds.o +# Power Management +obj-$(CONFIG_PM) += pm.o ifeq ($(CONFIG_PM_DEBUG),y) CFLAGS_pm.o += -DDEBUG -- cgit v1.2.3-59-g8ed1b From c8f385a631ef1f49d67a3798ca40dec36ccdf07d Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Wed, 23 Jan 2008 09:25:15 +0100 Subject: [ARM] 4757/1: [AT91] UART initialization Modify the UART initialization to allow the board-initialization code to specify which pins are connected, and which pins should therefore be initialized. The current at91_init_serial() will continue to work as-is, but is marked as "deprecated" and will be removed once the board-specific files has been updated to use the new interface. As in the AVR32 code, we assume that the TX and RX pins will always be initialized. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/at91rm9200_devices.c | 114 ++++++++++++++++++++++++------ arch/arm/mach-at91/at91sam9260_devices.c | 115 ++++++++++++++++++++++++++----- arch/arm/mach-at91/at91sam9261_devices.c | 77 ++++++++++++++++++--- arch/arm/mach-at91/at91sam9263_devices.c | 79 +++++++++++++++++---- arch/arm/mach-at91/at91sam9rl_devices.c | 99 ++++++++++++++++++++++---- include/asm-arm/arch-at91/board.h | 12 +++- 6 files changed, 420 insertions(+), 76 deletions(-) diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index a2647265c214..23966229ea9a 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -884,17 +884,21 @@ static struct platform_device at91rm9200_uart0_device = { .num_resources = ARRAY_SIZE(uart0_resources), }; -static inline void configure_usart0_pins(void) +static inline void configure_usart0_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PA17, 1); /* TXD0 */ at91_set_A_periph(AT91_PIN_PA18, 0); /* RXD0 */ - at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */ - /* - * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21. - * We need to drive the pin manually. Default is off (RTS is active low). - */ - at91_set_gpio_output(AT91_PIN_PA21, 1); + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */ + + if (pins & ATMEL_UART_RTS) { + /* + * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21. + * We need to drive the pin manually. Default is off (RTS is active low). + */ + at91_set_gpio_output(AT91_PIN_PA21, 1); + } } static struct resource uart1_resources[] = { @@ -929,16 +933,23 @@ static struct platform_device at91rm9200_uart1_device = { .num_resources = ARRAY_SIZE(uart1_resources), }; -static inline void configure_usart1_pins(void) +static inline void configure_usart1_pins(unsigned pins) { - at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */ - at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */ at91_set_A_periph(AT91_PIN_PB20, 1); /* TXD1 */ at91_set_A_periph(AT91_PIN_PB21, 0); /* RXD1 */ - at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */ - at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */ - at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */ - at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */ + + if (pins & ATMEL_UART_RI) + at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */ + if (pins & ATMEL_UART_DTR) + at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */ + if (pins & ATMEL_UART_DCD) + at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */ + if (pins & ATMEL_UART_DSR) + at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */ + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */ } static struct resource uart2_resources[] = { @@ -973,10 +984,15 @@ static struct platform_device at91rm9200_uart2_device = { .num_resources = ARRAY_SIZE(uart2_resources), }; -static inline void configure_usart2_pins(void) +static inline void configure_usart2_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PA22, 0); /* RXD2 */ at91_set_A_periph(AT91_PIN_PA23, 1); /* TXD2 */ + + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PA30, 0); /* CTS2 */ + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PA31, 0); /* RTS2 */ } static struct resource uart3_resources[] = { @@ -1011,16 +1027,21 @@ static struct platform_device at91rm9200_uart3_device = { .num_resources = ARRAY_SIZE(uart3_resources), }; -static inline void configure_usart3_pins(void) +static inline void configure_usart3_pins(unsigned pins) { at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */ at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */ + + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PB1, 0); /* CTS3 */ + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */ } static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init at91_init_serial(struct at91_uart_config *config) +void __init __deprecated at91_init_serial(struct at91_uart_config *config) { int i; @@ -1028,22 +1049,22 @@ void __init at91_init_serial(struct at91_uart_config *config) for (i = 0; i < config->nr_tty; i++) { switch (config->tty_map[i]) { case 0: - configure_usart0_pins(); + configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); at91_uarts[i] = &at91rm9200_uart0_device; at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart"); break; case 1: - configure_usart1_pins(); + configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI); at91_uarts[i] = &at91rm9200_uart1_device; at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart"); break; case 2: - configure_usart2_pins(); + configure_usart2_pins(0); at91_uarts[i] = &at91rm9200_uart2_device; at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart"); break; case 3: - configure_usart3_pins(); + configure_usart3_pins(0); at91_uarts[i] = &at91rm9200_uart3_device; at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart"); break; @@ -1065,6 +1086,53 @@ void __init at91_init_serial(struct at91_uart_config *config) printk(KERN_INFO "AT91: No default serial console defined.\n"); } +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) +{ + struct platform_device *pdev; + + switch (id) { + case 0: /* DBGU */ + pdev = &at91rm9200_dbgu_device; + configure_dbgu_pins(); + at91_clock_associate("mck", &pdev->dev, "usart"); + break; + case AT91RM9200_ID_US0: + pdev = &at91rm9200_uart0_device; + configure_usart0_pins(pins); + at91_clock_associate("usart0_clk", &pdev->dev, "usart"); + break; + case AT91RM9200_ID_US1: + pdev = &at91rm9200_uart1_device; + configure_usart1_pins(pins); + at91_clock_associate("usart1_clk", &pdev->dev, "usart"); + break; + case AT91RM9200_ID_US2: + pdev = &at91rm9200_uart2_device; + configure_usart2_pins(pins); + at91_clock_associate("usart2_clk", &pdev->dev, "usart"); + break; + case AT91RM9200_ID_US3: + pdev = &at91rm9200_uart3_device; + configure_usart3_pins(pins); + at91_clock_associate("usart3_clk", &pdev->dev, "usart"); + break; + default: + return; + } + pdev->id = portnr; /* update to mapped ID */ + + if (portnr < ATMEL_MAX_UART) + at91_uarts[portnr] = pdev; +} + +void __init at91_set_serial_console(unsigned portnr) +{ + if (portnr < ATMEL_MAX_UART) + atmel_default_console_device = at91_uarts[portnr]; + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); +} + void __init at91_add_device_serial(void) { int i; @@ -1075,7 +1143,9 @@ void __init at91_add_device_serial(void) } } #else -void __init at91_init_serial(struct at91_uart_config *config) {} +void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} +void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} #endif diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 8acd62b75cb0..5dd06bdccb00 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -760,16 +760,23 @@ static struct platform_device at91sam9260_uart0_device = { .num_resources = ARRAY_SIZE(uart0_resources), }; -static inline void configure_usart0_pins(void) +static inline void configure_usart0_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */ at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */ - at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */ - at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */ - at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */ - at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */ - at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */ - at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */ + if (pins & ATMEL_UART_DTR) + at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */ + if (pins & ATMEL_UART_DSR) + at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */ + if (pins & ATMEL_UART_DCD) + at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */ + if (pins & ATMEL_UART_RI) + at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */ } static struct resource uart1_resources[] = { @@ -804,12 +811,15 @@ static struct platform_device at91sam9260_uart1_device = { .num_resources = ARRAY_SIZE(uart1_resources), }; -static inline void configure_usart1_pins(void) +static inline void configure_usart1_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */ at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */ - at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */ - at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */ } static struct resource uart2_resources[] = { @@ -844,10 +854,15 @@ static struct platform_device at91sam9260_uart2_device = { .num_resources = ARRAY_SIZE(uart2_resources), }; -static inline void configure_usart2_pins(void) +static inline void configure_usart2_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */ at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PA4, 0); /* RTS2 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PA5, 0); /* CTS2 */ } static struct resource uart3_resources[] = { @@ -882,10 +897,15 @@ static struct platform_device at91sam9260_uart3_device = { .num_resources = ARRAY_SIZE(uart3_resources), }; -static inline void configure_usart3_pins(void) +static inline void configure_usart3_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PB10, 1); /* TXD3 */ at91_set_A_periph(AT91_PIN_PB11, 0); /* RXD3 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PC8, 0); /* RTS3 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PC10, 0); /* CTS3 */ } static struct resource uart4_resources[] = { @@ -967,7 +987,7 @@ static inline void configure_usart5_pins(void) static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init at91_init_serial(struct at91_uart_config *config) +void __init __deprecated at91_init_serial(struct at91_uart_config *config) { int i; @@ -975,22 +995,22 @@ void __init at91_init_serial(struct at91_uart_config *config) for (i = 0; i < config->nr_tty; i++) { switch (config->tty_map[i]) { case 0: - configure_usart0_pins(); + configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI); at91_uarts[i] = &at91sam9260_uart0_device; at91_clock_associate("usart0_clk", &at91sam9260_uart0_device.dev, "usart"); break; case 1: - configure_usart1_pins(); + configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); at91_uarts[i] = &at91sam9260_uart1_device; at91_clock_associate("usart1_clk", &at91sam9260_uart1_device.dev, "usart"); break; case 2: - configure_usart2_pins(); + configure_usart2_pins(0); at91_uarts[i] = &at91sam9260_uart2_device; at91_clock_associate("usart2_clk", &at91sam9260_uart2_device.dev, "usart"); break; case 3: - configure_usart3_pins(); + configure_usart3_pins(0); at91_uarts[i] = &at91sam9260_uart3_device; at91_clock_associate("usart3_clk", &at91sam9260_uart3_device.dev, "usart"); break; @@ -1022,6 +1042,63 @@ void __init at91_init_serial(struct at91_uart_config *config) printk(KERN_INFO "AT91: No default serial console defined.\n"); } +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) +{ + struct platform_device *pdev; + + switch (id) { + case 0: /* DBGU */ + pdev = &at91sam9260_dbgu_device; + configure_dbgu_pins(); + at91_clock_associate("mck", &pdev->dev, "usart"); + break; + case AT91SAM9260_ID_US0: + pdev = &at91sam9260_uart0_device; + configure_usart0_pins(pins); + at91_clock_associate("usart0_clk", &pdev->dev, "usart"); + break; + case AT91SAM9260_ID_US1: + pdev = &at91sam9260_uart1_device; + configure_usart1_pins(pins); + at91_clock_associate("usart1_clk", &pdev->dev, "usart"); + break; + case AT91SAM9260_ID_US2: + pdev = &at91sam9260_uart2_device; + configure_usart2_pins(pins); + at91_clock_associate("usart2_clk", &pdev->dev, "usart"); + break; + case AT91SAM9260_ID_US3: + pdev = &at91sam9260_uart3_device; + configure_usart3_pins(pins); + at91_clock_associate("usart3_clk", &pdev->dev, "usart"); + break; + case AT91SAM9260_ID_US4: + pdev = &at91sam9260_uart4_device; + configure_usart4_pins(); + at91_clock_associate("usart4_clk", &pdev->dev, "usart"); + break; + case AT91SAM9260_ID_US5: + pdev = &at91sam9260_uart5_device; + configure_usart5_pins(); + at91_clock_associate("usart5_clk", &pdev->dev, "usart"); + break; + default: + return; + } + pdev->id = portnr; /* update to mapped ID */ + + if (portnr < ATMEL_MAX_UART) + at91_uarts[portnr] = pdev; +} + +void __init at91_set_serial_console(unsigned portnr) +{ + if (portnr < ATMEL_MAX_UART) + atmel_default_console_device = at91_uarts[portnr]; + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); +} + void __init at91_add_device_serial(void) { int i; @@ -1032,7 +1109,9 @@ void __init at91_add_device_serial(void) } } #else -void __init at91_init_serial(struct at91_uart_config *config) {} +void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} +void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} #endif diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index ba84ba6f18fb..467a6431d71a 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -867,12 +867,15 @@ static struct platform_device at91sam9261_uart0_device = { .num_resources = ARRAY_SIZE(uart0_resources), }; -static inline void configure_usart0_pins(void) +static inline void configure_usart0_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */ at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */ - at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */ - at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */ } static struct resource uart1_resources[] = { @@ -907,10 +910,15 @@ static struct platform_device at91sam9261_uart1_device = { .num_resources = ARRAY_SIZE(uart1_resources), }; -static inline void configure_usart1_pins(void) +static inline void configure_usart1_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */ at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PA12, 0); /* RTS1 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PA13, 0); /* CTS1 */ } static struct resource uart2_resources[] = { @@ -945,16 +953,21 @@ static struct platform_device at91sam9261_uart2_device = { .num_resources = ARRAY_SIZE(uart2_resources), }; -static inline void configure_usart2_pins(void) +static inline void configure_usart2_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */ at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PA15, 0); /* RTS2*/ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PA16, 0); /* CTS2 */ } static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init at91_init_serial(struct at91_uart_config *config) +void __init __deprecated at91_init_serial(struct at91_uart_config *config) { int i; @@ -962,17 +975,17 @@ void __init at91_init_serial(struct at91_uart_config *config) for (i = 0; i < config->nr_tty; i++) { switch (config->tty_map[i]) { case 0: - configure_usart0_pins(); + configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); at91_uarts[i] = &at91sam9261_uart0_device; at91_clock_associate("usart0_clk", &at91sam9261_uart0_device.dev, "usart"); break; case 1: - configure_usart1_pins(); + configure_usart1_pins(0); at91_uarts[i] = &at91sam9261_uart1_device; at91_clock_associate("usart1_clk", &at91sam9261_uart1_device.dev, "usart"); break; case 2: - configure_usart2_pins(); + configure_usart2_pins(0); at91_uarts[i] = &at91sam9261_uart2_device; at91_clock_associate("usart2_clk", &at91sam9261_uart2_device.dev, "usart"); break; @@ -994,6 +1007,48 @@ void __init at91_init_serial(struct at91_uart_config *config) printk(KERN_INFO "AT91: No default serial console defined.\n"); } +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) +{ + struct platform_device *pdev; + + switch (id) { + case 0: /* DBGU */ + pdev = &at91sam9261_dbgu_device; + configure_dbgu_pins(); + at91_clock_associate("mck", &pdev->dev, "usart"); + break; + case AT91SAM9261_ID_US0: + pdev = &at91sam9261_uart0_device; + configure_usart0_pins(pins); + at91_clock_associate("usart0_clk", &pdev->dev, "usart"); + break; + case AT91SAM9261_ID_US1: + pdev = &at91sam9261_uart1_device; + configure_usart1_pins(pins); + at91_clock_associate("usart1_clk", &pdev->dev, "usart"); + break; + case AT91SAM9261_ID_US2: + pdev = &at91sam9261_uart2_device; + configure_usart2_pins(pins); + at91_clock_associate("usart2_clk", &pdev->dev, "usart"); + break; + default: + return; + } + pdev->id = portnr; /* update to mapped ID */ + + if (portnr < ATMEL_MAX_UART) + at91_uarts[portnr] = pdev; +} + +void __init at91_set_serial_console(unsigned portnr) +{ + if (portnr < ATMEL_MAX_UART) + atmel_default_console_device = at91_uarts[portnr]; + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); +} + void __init at91_add_device_serial(void) { int i; @@ -1004,7 +1059,9 @@ void __init at91_add_device_serial(void) } } #else -void __init at91_init_serial(struct at91_uart_config *config) {} +void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} +void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} #endif diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index c025f5c5ffaa..a9f35d0c1cb0 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -1071,12 +1071,15 @@ static struct platform_device at91sam9263_uart0_device = { .num_resources = ARRAY_SIZE(uart0_resources), }; -static inline void configure_usart0_pins(void) +static inline void configure_usart0_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */ at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */ - at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */ - at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */ } static struct resource uart1_resources[] = { @@ -1111,12 +1114,15 @@ static struct platform_device at91sam9263_uart1_device = { .num_resources = ARRAY_SIZE(uart1_resources), }; -static inline void configure_usart1_pins(void) +static inline void configure_usart1_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */ - at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */ - at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */ } static struct resource uart2_resources[] = { @@ -1151,18 +1157,21 @@ static struct platform_device at91sam9263_uart2_device = { .num_resources = ARRAY_SIZE(uart2_resources), }; -static inline void configure_usart2_pins(void) +static inline void configure_usart2_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */ - at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */ - at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ } static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init at91_init_serial(struct at91_uart_config *config) +void __init __deprecated at91_init_serial(struct at91_uart_config *config) { int i; @@ -1170,17 +1179,17 @@ void __init at91_init_serial(struct at91_uart_config *config) for (i = 0; i < config->nr_tty; i++) { switch (config->tty_map[i]) { case 0: - configure_usart0_pins(); + configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); at91_uarts[i] = &at91sam9263_uart0_device; at91_clock_associate("usart0_clk", &at91sam9263_uart0_device.dev, "usart"); break; case 1: - configure_usart1_pins(); + configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); at91_uarts[i] = &at91sam9263_uart1_device; at91_clock_associate("usart1_clk", &at91sam9263_uart1_device.dev, "usart"); break; case 2: - configure_usart2_pins(); + configure_usart2_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); at91_uarts[i] = &at91sam9263_uart2_device; at91_clock_associate("usart2_clk", &at91sam9263_uart2_device.dev, "usart"); break; @@ -1202,6 +1211,48 @@ void __init at91_init_serial(struct at91_uart_config *config) printk(KERN_INFO "AT91: No default serial console defined.\n"); } +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) +{ + struct platform_device *pdev; + + switch (id) { + case 0: /* DBGU */ + pdev = &at91sam9263_dbgu_device; + configure_dbgu_pins(); + at91_clock_associate("mck", &pdev->dev, "usart"); + break; + case AT91SAM9263_ID_US0: + pdev = &at91sam9263_uart0_device; + configure_usart0_pins(pins); + at91_clock_associate("usart0_clk", &pdev->dev, "usart"); + break; + case AT91SAM9263_ID_US1: + pdev = &at91sam9263_uart1_device; + configure_usart1_pins(pins); + at91_clock_associate("usart1_clk", &pdev->dev, "usart"); + break; + case AT91SAM9263_ID_US2: + pdev = &at91sam9263_uart2_device; + configure_usart2_pins(pins); + at91_clock_associate("usart2_clk", &pdev->dev, "usart"); + break; + default: + return; + } + pdev->id = portnr; /* update to mapped ID */ + + if (portnr < ATMEL_MAX_UART) + at91_uarts[portnr] = pdev; +} + +void __init at91_set_serial_console(unsigned portnr) +{ + if (portnr < ATMEL_MAX_UART) + atmel_default_console_device = at91_uarts[portnr]; + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); +} + void __init at91_add_device_serial(void) { int i; @@ -1213,6 +1264,8 @@ void __init at91_add_device_serial(void) } #else void __init at91_init_serial(struct at91_uart_config *config) {} +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} +void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} #endif diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index e886cdfe919d..a942b9e35560 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -676,12 +676,23 @@ static struct platform_device at91sam9rl_uart0_device = { .num_resources = ARRAY_SIZE(uart0_resources), }; -static inline void configure_usart0_pins(void) +static inline void configure_usart0_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */ at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */ - at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */ - at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */ + if (pins & ATMEL_UART_DSR) + at91_set_A_periph(AT91_PIN_PD14, 0); /* DSR0 */ + if (pins & ATMEL_UART_DTR) + at91_set_A_periph(AT91_PIN_PD15, 0); /* DTR0 */ + if (pins & ATMEL_UART_DCD) + at91_set_A_periph(AT91_PIN_PD16, 0); /* DCD0 */ + if (pins & ATMEL_UART_RI) + at91_set_A_periph(AT91_PIN_PD17, 0); /* RI0 */ } static struct resource uart1_resources[] = { @@ -716,10 +727,15 @@ static struct platform_device at91sam9rl_uart1_device = { .num_resources = ARRAY_SIZE(uart1_resources), }; -static inline void configure_usart1_pins(void) +static inline void configure_usart1_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */ at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PA18, 0); /* RTS1 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PA19, 0); /* CTS1 */ } static struct resource uart2_resources[] = { @@ -754,10 +770,15 @@ static struct platform_device at91sam9rl_uart2_device = { .num_resources = ARRAY_SIZE(uart2_resources), }; -static inline void configure_usart2_pins(void) +static inline void configure_usart2_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */ at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */ + + if (pins & ATMEL_UART_RTS) + at91_set_A_periph(AT91_PIN_PA29, 0); /* RTS2 */ + if (pins & ATMEL_UART_CTS) + at91_set_A_periph(AT91_PIN_PA30, 0); /* CTS2 */ } static struct resource uart3_resources[] = { @@ -792,16 +813,21 @@ static struct platform_device at91sam9rl_uart3_device = { .num_resources = ARRAY_SIZE(uart3_resources), }; -static inline void configure_usart3_pins(void) +static inline void configure_usart3_pins(unsigned pins) { at91_set_A_periph(AT91_PIN_PB0, 1); /* TXD3 */ at91_set_A_periph(AT91_PIN_PB1, 0); /* RXD3 */ + + if (pins & ATMEL_UART_RTS) + at91_set_B_periph(AT91_PIN_PD4, 0); /* RTS3 */ + if (pins & ATMEL_UART_CTS) + at91_set_B_periph(AT91_PIN_PD3, 0); /* CTS3 */ } static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init at91_init_serial(struct at91_uart_config *config) +void __init __deprecated at91_init_serial(struct at91_uart_config *config) { int i; @@ -809,22 +835,22 @@ void __init at91_init_serial(struct at91_uart_config *config) for (i = 0; i < config->nr_tty; i++) { switch (config->tty_map[i]) { case 0: - configure_usart0_pins(); + configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); at91_uarts[i] = &at91sam9rl_uart0_device; at91_clock_associate("usart0_clk", &at91sam9rl_uart0_device.dev, "usart"); break; case 1: - configure_usart1_pins(); + configure_usart1_pins(0); at91_uarts[i] = &at91sam9rl_uart1_device; at91_clock_associate("usart1_clk", &at91sam9rl_uart1_device.dev, "usart"); break; case 2: - configure_usart2_pins(); + configure_usart2_pins(0); at91_uarts[i] = &at91sam9rl_uart2_device; at91_clock_associate("usart2_clk", &at91sam9rl_uart2_device.dev, "usart"); break; case 3: - configure_usart3_pins(); + configure_usart3_pins(0); at91_uarts[i] = &at91sam9rl_uart3_device; at91_clock_associate("usart3_clk", &at91sam9rl_uart3_device.dev, "usart"); break; @@ -846,6 +872,53 @@ void __init at91_init_serial(struct at91_uart_config *config) printk(KERN_INFO "AT91: No default serial console defined.\n"); } +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) +{ + struct platform_device *pdev; + + switch (id) { + case 0: /* DBGU */ + pdev = &at91sam9rl_dbgu_device; + configure_dbgu_pins(); + at91_clock_associate("mck", &pdev->dev, "usart"); + break; + case AT91SAM9RL_ID_US0: + pdev = &at91sam9rl_uart0_device; + configure_usart0_pins(pins); + at91_clock_associate("usart0_clk", &pdev->dev, "usart"); + break; + case AT91SAM9RL_ID_US1: + pdev = &at91sam9rl_uart1_device; + configure_usart1_pins(pins); + at91_clock_associate("usart1_clk", &pdev->dev, "usart"); + break; + case AT91SAM9RL_ID_US2: + pdev = &at91sam9rl_uart2_device; + configure_usart2_pins(pins); + at91_clock_associate("usart2_clk", &pdev->dev, "usart"); + break; + case AT91SAM9RL_ID_US3: + pdev = &at91sam9rl_uart3_device; + configure_usart3_pins(pins); + at91_clock_associate("usart3_clk", &pdev->dev, "usart"); + break; + default: + return; + } + pdev->id = portnr; /* update to mapped ID */ + + if (portnr < ATMEL_MAX_UART) + at91_uarts[portnr] = pdev; +} + +void __init at91_set_serial_console(unsigned portnr) +{ + if (portnr < ATMEL_MAX_UART) + atmel_default_console_device = at91_uarts[portnr]; + if (!atmel_default_console_device) + printk(KERN_INFO "AT91: No default serial console defined.\n"); +} + void __init at91_add_device_serial(void) { int i; @@ -856,7 +929,9 @@ void __init at91_add_device_serial(void) } } #else -void __init at91_init_serial(struct at91_uart_config *config) {} +void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} +void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} +void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} #endif diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h index 7fefe018833c..3f41ab28b37f 100644 --- a/include/asm-arm/arch-at91/board.h +++ b/include/asm-arm/arch-at91/board.h @@ -101,13 +101,23 @@ extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_de extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices); /* Serial */ +#define ATMEL_UART_CTS 0x01 +#define ATMEL_UART_RTS 0x02 +#define ATMEL_UART_DSR 0x04 +#define ATMEL_UART_DTR 0x08 +#define ATMEL_UART_DCD 0x10 +#define ATMEL_UART_RI 0x20 + +extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins); +extern void __init at91_set_serial_console(unsigned portnr); + struct at91_uart_config { unsigned short console_tty; /* tty number of serial console */ unsigned short nr_tty; /* number of serial tty's */ short tty_map[]; /* map UART to tty number */ }; extern struct platform_device *atmel_default_console_device; -extern void __init at91_init_serial(struct at91_uart_config *config); +extern void __init __deprecated at91_init_serial(struct at91_uart_config *config); struct atmel_uart_data { short use_dma_tx; /* use transmit DMA? */ -- cgit v1.2.3-59-g8ed1b From a04ff1af9723607f5901b79c559357e37cee6823 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Wed, 23 Jan 2008 09:27:06 +0100 Subject: [ARM] 4758/1: [AT91] LEDs Move the LED initialization code out of the various *_devices.c files, and into leds.c. Also add support for NEW_LEDs. Patch from David Brownell. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/Makefile | 2 +- arch/arm/mach-at91/at91rm9200_devices.c | 22 ----------- arch/arm/mach-at91/at91sam9260_devices.c | 22 ----------- arch/arm/mach-at91/at91sam9261_devices.c | 22 ----------- arch/arm/mach-at91/at91sam9263_devices.c | 22 ----------- arch/arm/mach-at91/at91sam9rl_devices.c | 22 ----------- arch/arm/mach-at91/leds.c | 68 +++++++++++++++++++++++++++++++- include/asm-arm/arch-at91/board.h | 4 +- 8 files changed, 70 insertions(+), 114 deletions(-) diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index a8a009c2cf7d..529ffb5f3f13 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -45,7 +45,7 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o # Drivers -obj-$(CONFIG_LEDS) += leds.o +obj-y += leds.o # Power Management obj-$(CONFIG_PM) += pm.o diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 23966229ea9a..ea9a952fb877 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -613,28 +613,6 @@ static void __init at91_add_device_watchdog(void) {} #endif -/* -------------------------------------------------------------------- - * LEDs - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_LEDS) -u8 at91_leds_cpu; -u8 at91_leds_timer; - -void __init at91_init_leds(u8 cpu_led, u8 timer_led) -{ - /* Enable GPIO to access the LEDs */ - at91_set_gpio_output(cpu_led, 1); - at91_set_gpio_output(timer_led, 1); - - at91_leds_cpu = cpu_led; - at91_leds_timer = timer_led; -} -#else -void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} -#endif - - /* -------------------------------------------------------------------- * SSC -- Synchronous Serial Controller * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 5dd06bdccb00..105f8403860b 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -584,28 +584,6 @@ static void __init at91_add_device_watchdog(void) {} #endif -/* -------------------------------------------------------------------- - * LEDs - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_LEDS) -u8 at91_leds_cpu; -u8 at91_leds_timer; - -void __init at91_init_leds(u8 cpu_led, u8 timer_led) -{ - /* Enable GPIO to access the LEDs */ - at91_set_gpio_output(cpu_led, 1); - at91_set_gpio_output(timer_led, 1); - - at91_leds_cpu = cpu_led; - at91_leds_timer = timer_led; -} -#else -void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} -#endif - - /* -------------------------------------------------------------------- * SSC -- Synchronous Serial Controller * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 467a6431d71a..57d7e3bd05db 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -596,28 +596,6 @@ static void __init at91_add_device_watchdog(void) {} #endif -/* -------------------------------------------------------------------- - * LEDs - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_LEDS) -u8 at91_leds_cpu; -u8 at91_leds_timer; - -void __init at91_init_leds(u8 cpu_led, u8 timer_led) -{ - /* Enable GPIO to access the LEDs */ - at91_set_gpio_output(cpu_led, 1); - at91_set_gpio_output(timer_led, 1); - - at91_leds_cpu = cpu_led; - at91_leds_timer = timer_led; -} -#else -void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} -#endif - - /* -------------------------------------------------------------------- * SSC -- Synchronous Serial Controller * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index a9f35d0c1cb0..0b12e1adcc8e 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -843,28 +843,6 @@ static void __init at91_add_device_watchdog(void) {} #endif -/* -------------------------------------------------------------------- - * LEDs - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_LEDS) -u8 at91_leds_cpu; -u8 at91_leds_timer; - -void __init at91_init_leds(u8 cpu_led, u8 timer_led) -{ - /* Enable GPIO to access the LEDs */ - at91_set_gpio_output(cpu_led, 1); - at91_set_gpio_output(timer_led, 1); - - at91_leds_cpu = cpu_led; - at91_leds_timer = timer_led; -} -#else -void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} -#endif - - /* -------------------------------------------------------------------- * SSC -- Synchronous Serial Controller * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index a942b9e35560..f43b5c33e45d 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -449,28 +449,6 @@ static void __init at91_add_device_watchdog(void) {} #endif -/* -------------------------------------------------------------------- - * LEDs - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_LEDS) -u8 at91_leds_cpu; -u8 at91_leds_timer; - -void __init at91_init_leds(u8 cpu_led, u8 timer_led) -{ - /* Enable GPIO to access the LEDs */ - at91_set_gpio_output(cpu_led, 1); - at91_set_gpio_output(timer_led, 1); - - at91_leds_cpu = cpu_led; - at91_leds_timer = timer_led; -} -#else -void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} -#endif - - /* -------------------------------------------------------------------- * SSC -- Synchronous Serial Controller * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c index 0d5144973988..9cdcda500fe8 100644 --- a/arch/arm/mach-at91/leds.c +++ b/arch/arm/mach-at91/leds.c @@ -14,11 +14,62 @@ #include #include -#include #include #include +/* ------------------------------------------------------------------------- */ + +#if defined(CONFIG_NEW_LEDS) + +#include + +/* + * New cross-platform LED support. + */ + +static struct gpio_led_platform_data led_data; + +static struct platform_device at91_leds = { + .name = "leds-gpio", + .id = -1, + .dev.platform_data = &led_data, +}; + +void __init at91_gpio_leds(struct gpio_led *leds, int nr) +{ + int i; + + if (!nr) + return; + + for (i = 0; i < nr; i++) + at91_set_gpio_output(leds[i].gpio, leds[i].active_low); + + led_data.leds = leds; + led_data.num_leds = nr; + platform_device_register(&at91_leds); +} + +#else +void __init at91_gpio_leds(struct gpio_led *leds, int nr) {} +#endif + + +/* ------------------------------------------------------------------------- */ + +#if defined(CONFIG_LEDS) + +#include + +/* + * Old ARM-specific LED framework; not fully functional when generic time is + * in use. + */ + +static u8 at91_leds_cpu; +static u8 at91_leds_timer; + static inline void at91_led_on(unsigned int led) { at91_set_gpio_value(led, 0); @@ -93,3 +144,18 @@ static int __init leds_init(void) } __initcall(leds_init); + + +void __init at91_init_leds(u8 cpu_led, u8 timer_led) +{ + /* Enable GPIO to access the LEDs */ + at91_set_gpio_output(cpu_led, 1); + at91_set_gpio_output(timer_led, 1); + + at91_leds_cpu = cpu_led; + at91_leds_timer = timer_led; +} + +#else +void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} +#endif diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h index 3f41ab28b37f..e88ad8621c17 100644 --- a/include/asm-arm/arch-at91/board.h +++ b/include/asm-arm/arch-at91/board.h @@ -34,6 +34,7 @@ #include #include #include +#include #include /* USB Device */ @@ -157,9 +158,8 @@ extern void __init at91_add_device_ac97(struct atmel_ac97_data *data); extern void __init at91_add_device_isi(void); /* LEDs */ -extern u8 at91_leds_cpu; -extern u8 at91_leds_timer; extern void __init at91_init_leds(u8 cpu_led, u8 timer_led); +extern void __init at91_gpio_leds(struct gpio_led *leds, int nr); /* FIXME: this needs a better location, but gets stuff building again */ extern int at91_suspend_entering_slow_clock(void); -- cgit v1.2.3-59-g8ed1b From 6d2a8401d27e3eb8b71d09dd67e0e7d0085b5e29 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Wed, 23 Jan 2008 09:28:27 +0100 Subject: [ARM] 4759/1: [AT91] Buttons on CSB300 Support for the 3 GPIO-connected buttons on the CSB300 board. Based on wakeup testing code from David Brownell. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/board-csb337.c | 61 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index d0aa20c9383e..51cb3c8cc601 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -25,6 +25,8 @@ #include #include #include +#include +#include #include #include @@ -156,6 +158,63 @@ static struct platform_device csb_flash = { .num_resources = ARRAY_SIZE(csb_flash_resources), }; +/* + * GPIO Buttons (on CSB300) + */ +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +static struct gpio_keys_button csb300_buttons[] = { + { + .gpio = AT91_PIN_PB29, + .code = BTN_0, + .desc = "sw0", + .active_low = 1, + .wakeup = 1, + }, + { + .gpio = AT91_PIN_PB28, + .code = BTN_1, + .desc = "sw1", + .active_low = 1, + .wakeup = 1, + }, + { + .gpio = AT91_PIN_PA21, + .code = BTN_2, + .desc = "sw2", + .active_low = 1, + .wakeup = 1, + } +}; + +static struct gpio_keys_platform_data csb300_button_data = { + .buttons = csb300_buttons, + .nbuttons = ARRAY_SIZE(csb300_buttons), +}; + +static struct platform_device csb300_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &csb300_button_data, + } +}; + +static void __init csb300_add_device_buttons(void) +{ + at91_set_gpio_input(AT91_PIN_PB29, 0); /* sw0 */ + at91_set_deglitch(AT91_PIN_PB29, 1); + at91_set_gpio_input(AT91_PIN_PB28, 0); /* sw1 */ + at91_set_deglitch(AT91_PIN_PB28, 1); + at91_set_gpio_input(AT91_PIN_PA21, 0); /* sw2 */ + at91_set_deglitch(AT91_PIN_PA21, 1); + + platform_device_register(&csb300_button_device); +} +#else +static void __init csb300_add_device_buttons(void) {} +#endif + static void __init csb337_board_init(void) { /* Serial */ @@ -177,6 +236,8 @@ static void __init csb337_board_init(void) at91_add_device_mmc(0, &csb337_mmc_data); /* NOR flash */ platform_device_register(&csb_flash); + /* Switches on CSB300 */ + csb300_add_device_buttons(); } MACHINE_START(CSB337, "Cogent CSB337") -- cgit v1.2.3-59-g8ed1b From 2743f0c1dcca54d6c80b0de1273b3f4e90051a85 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Wed, 23 Jan 2008 09:29:46 +0100 Subject: [ARM] 4760/1: [AT91] SPI CS0 errata on AT91RM9200 Due to errata regarding the handling of SPI CS0 on the AT91RM9200, the atmel_spi driver drives CS0 from the SPI controller and not as a GPIO pin. We therefore need to configure CS0 for use by the controller Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/at91rm9200_devices.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index ea9a952fb877..ef6aeb86e980 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -558,8 +558,11 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) else cs_pin = spi_standard_cs[devices[i].chip_select]; - /* enable chip-select pin */ - at91_set_gpio_output(cs_pin, 1); + if (devices[i].chip_select == 0) /* for CS0 errata */ + at91_set_A_periph(cs_pin, 0); + else + at91_set_gpio_output(cs_pin, 1); + /* pass chip-select pin to driver */ devices[i].controller_data = (void *) cs_pin; -- cgit v1.2.3-59-g8ed1b From 1b41bdf68a72c1fd506ee3dbfbf954fd2eaef75c Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Wed, 23 Jan 2008 09:32:17 +0100 Subject: [ARM] 4761/1: [AT91] Board-support for NEW_LEDs Add NEW_LEDs support for the following boards: - Cogent CSB337 - Atmel AT91RM9200-DK - Atmel AT91RM9200-EK - Atmel AT91SAM9263-EK Mostly based on patch from David Brownell. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/board-csb337.c | 24 ++++++++++++++++++++++++ arch/arm/mach-at91/board-dk.c | 10 ++++++++++ arch/arm/mach-at91/board-ek.c | 21 +++++++++++++++++++++ arch/arm/mach-at91/board-sam9263ek.c | 26 ++++++++++++++++++++++++++ 4 files changed, 81 insertions(+) diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index 51cb3c8cc601..0e2a11fc5bbd 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -215,6 +215,28 @@ static void __init csb300_add_device_buttons(void) static void __init csb300_add_device_buttons(void) {} #endif +static struct gpio_led csb_leds[] = { + { /* "led0", yellow */ + .name = "led0", + .gpio = AT91_PIN_PB2, + .active_low = 1, + .default_trigger = "heartbeat", + }, + { /* "led1", green */ + .name = "led1", + .gpio = AT91_PIN_PB1, + .active_low = 1, + .default_trigger = "mmc0", + }, + { /* "led2", yellow */ + .name = "led2", + .gpio = AT91_PIN_PB0, + .active_low = 1, + .default_trigger = "ide-disk", + }, +}; + + static void __init csb337_board_init(void) { /* Serial */ @@ -236,6 +258,8 @@ static void __init csb337_board_init(void) at91_add_device_mmc(0, &csb337_mmc_data); /* NOR flash */ platform_device_register(&csb_flash); + /* LEDs */ + at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds)); /* Switches on CSB300 */ csb300_add_device_buttons(); } diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c index 40c9e4331706..0a897efeba8e 100644 --- a/arch/arm/mach-at91/board-dk.c +++ b/arch/arm/mach-at91/board-dk.c @@ -183,6 +183,14 @@ static struct platform_device dk_flash = { .num_resources = 1, }; +static struct gpio_led dk_leds[] = { + { + .name = "led0", + .gpio = AT91_PIN_PB2, + .active_low = 1, + .default_trigger = "heartbeat", + } +}; static void __init dk_board_init(void) { @@ -213,6 +221,8 @@ static void __init dk_board_init(void) at91_add_device_nand(&dk_nand_data); /* NOR Flash */ platform_device_register(&dk_flash); + /* LEDs */ + at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds)); /* VGA */ // dk_add_device_video(); } diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c index 53a5ef9e72ee..0574e50a30dd 100644 --- a/arch/arm/mach-at91/board-ek.c +++ b/arch/arm/mach-at91/board-ek.c @@ -141,6 +141,25 @@ static struct platform_device ek_flash = { .num_resources = 1, }; +static struct gpio_led ek_leds[] = { + { /* "user led 1", DS2 */ + .name = "green", + .gpio = AT91_PIN_PB0, + .active_low = 1, + .default_trigger = "mmc0", + }, + { /* "user led 2", DS4 */ + .name = "yellow", + .gpio = AT91_PIN_PB1, + .active_low = 1, + .default_trigger = "heartbeat", + }, + { /* "user led 3", DS6 */ + .name = "red", + .gpio = AT91_PIN_PB2, + .active_low = 1, + } +}; static void __init ek_board_init(void) { @@ -167,6 +186,8 @@ static void __init ek_board_init(void) #endif /* NOR Flash */ platform_device_register(&ek_flash); + /* LEDs */ + at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); /* VGA */ // ek_add_device_video(); } diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index a9dd59543ec7..2df0ff25d147 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -272,6 +272,30 @@ static struct atmel_ac97_data ek_ac97_data = { }; +/* + * LEDs ... these could all be PWM-driven, for variable brightness + */ +static struct gpio_led ek_leds[] = { + { /* "left" led, green, userled1, pwm1 */ + .name = "ds1", + .gpio = AT91_PIN_PB8, + .active_low = 1, + .default_trigger = "mmc0", + }, + { /* "right" led, green, userled2, pwm2 */ + .name = "ds2", + .gpio = AT91_PIN_PC29, + .active_low = 1, + .default_trigger = "nand-disk", + }, + { /* "power" led, yellow, pwm0 */ + .name = "ds3", + .gpio = AT91_PIN_PB7, + .default_trigger = "heartbeat", + }, +}; + + static void __init ek_board_init(void) { /* Serial */ @@ -297,6 +321,8 @@ static void __init ek_board_init(void) at91_add_device_lcdc(&ek_lcdc_data); /* AC97 */ at91_add_device_ac97(&ek_ac97_data); + /* LEDs */ + at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); } MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") -- cgit v1.2.3-59-g8ed1b From da7a42d60ba214937ddb35152f336a4e4baa49a6 Mon Sep 17 00:00:00 2001 From: Christian Glindkamp Date: Thu, 3 Jan 2008 12:15:23 +0100 Subject: [ARM] 4738/1: at91sam9261: Remove udc pullup enabling in board initialisation Currently the udc pullup is enabled by default on boot. If the device is connected to a host at this time, the host starts the negotiation before the udc/gadget driver is ready to handle it. Signed-off-by: Christian Glindkamp Acked-by: David Brownell Acked-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/at91sam9261_devices.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 57d7e3bd05db..245641263fce 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -107,8 +107,6 @@ static struct platform_device at91sam9261_udc_device = { void __init at91_add_device_udc(struct at91_udc_data *data) { - unsigned long x; - if (!data) return; @@ -117,9 +115,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) at91_set_deglitch(data->vbus_pin, 1); } - /* Pullup pin is handled internally */ - x = at91_sys_read(AT91_MATRIX_USBPUCR); - at91_sys_write(AT91_MATRIX_USBPUCR, x | AT91_MATRIX_USBPUCR_PUON); + /* Pullup pin is handled internally by USB device peripheral */ udc_data = *data; platform_device_register(&at91sam9261_udc_device); -- cgit v1.2.3-59-g8ed1b From 2b3b3516b6eeea1464e205b2dde9ebc9b7dd2ec8 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Thu, 24 Jan 2008 15:10:39 +0100 Subject: [ARM] 4764/1: [AT91] AT91CAP9 core support Add support for Atmel's AT91CAP9 Customizable Microcontroller family. Signed-off-by: Stelian Pop Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/Kconfig | 4 +- arch/arm/mach-at91/Kconfig | 3 + arch/arm/mach-at91/Makefile | 1 + arch/arm/mach-at91/Makefile.boot | 7 +- arch/arm/mach-at91/at91cap9.c | 365 ++++++++ arch/arm/mach-at91/at91cap9_devices.c | 1066 ++++++++++++++++++++++++ arch/arm/mach-at91/clock.c | 2 + arch/arm/mach-at91/generic.h | 2 + arch/arm/mach-at91/pm.c | 5 + arch/arm/mm/Kconfig | 4 +- drivers/net/Kconfig | 2 +- drivers/usb/gadget/Kconfig | 2 +- drivers/video/Kconfig | 2 +- drivers/video/atmel_lcdfb.c | 2 +- include/asm-arm/arch-at91/at91_pmc.h | 7 +- include/asm-arm/arch-at91/at91cap9.h | 121 +++ include/asm-arm/arch-at91/at91cap9_matrix.h | 132 +++ include/asm-arm/arch-at91/at91sam9263_matrix.h | 2 +- include/asm-arm/arch-at91/at91sam9rl_matrix.h | 2 +- include/asm-arm/arch-at91/board.h | 2 +- include/asm-arm/arch-at91/cpu.h | 9 +- include/asm-arm/arch-at91/hardware.h | 2 + include/asm-arm/arch-at91/timex.h | 5 + include/asm-avr32/arch-at32ap/cpu.h | 1 + 24 files changed, 1735 insertions(+), 15 deletions(-) create mode 100644 arch/arm/mach-at91/at91cap9.c create mode 100644 arch/arm/mach-at91/at91cap9_devices.c create mode 100644 include/asm-arm/arch-at91/at91cap9.h create mode 100644 include/asm-arm/arch-at91/at91cap9_matrix.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 93e40b65fd0b..0bd479c47651 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -180,8 +180,8 @@ config ARCH_AT91 bool "Atmel AT91" select GENERIC_GPIO help - This enables support for systems based on the Atmel AT91RM9200 - and AT91SAM9xxx processors. + This enables support for systems based on the Atmel AT91RM9200, + AT91SAM9 and AT91CAP9 processors. config ARCH_CLPS7500 bool "Cirrus CL-PS7500FE" diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 214733e897e5..d12c616407d6 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -22,6 +22,9 @@ config ARCH_AT91SAM9263 config ARCH_AT91SAM9RL bool "AT91SAM9RL" +config ARCH_AT91CAP9 + bool "AT91CAP9" + config ARCH_AT91X40 bool "AT91x40" diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 529ffb5f3f13..10413c5d3f8a 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_d obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o +obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o # AT91RM9200 board-specific support diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot index e667dcc7cd34..071a2506a69f 100644 --- a/arch/arm/mach-at91/Makefile.boot +++ b/arch/arm/mach-at91/Makefile.boot @@ -3,7 +3,12 @@ # PARAMS_PHYS must be within 4MB of ZRELADDR # INITRD_PHYS must be in RAM +ifeq ($(CONFIG_ARCH_AT91CAP9),y) + zreladdr-y := 0x70008000 +params_phys-y := 0x70000100 +initrd_phys-y := 0x70410000 +else zreladdr-y := 0x20008000 params_phys-y := 0x20000100 initrd_phys-y := 0x20410000 - +endif diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c new file mode 100644 index 000000000000..48d27d8000b0 --- /dev/null +++ b/arch/arm/mach-at91/at91cap9.c @@ -0,0 +1,365 @@ +/* + * arch/arm/mach-at91/at91cap9.c + * + * Copyright (C) 2007 Stelian Pop + * Copyright (C) 2007 Lead Tech Design + * Copyright (C) 2007 Atmel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include + +#include +#include +#include +#include +#include + +#include "generic.h" +#include "clock.h" + +static struct map_desc at91cap9_io_desc[] __initdata = { + { + .virtual = AT91_VA_BASE_SYS, + .pfn = __phys_to_pfn(AT91_BASE_SYS), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = AT91_IO_VIRT_BASE - AT91CAP9_SRAM_SIZE, + .pfn = __phys_to_pfn(AT91CAP9_SRAM_BASE), + .length = AT91CAP9_SRAM_SIZE, + .type = MT_DEVICE, + }, +}; + +/* -------------------------------------------------------------------- + * Clocks + * -------------------------------------------------------------------- */ + +/* + * The peripheral clocks. + */ +static struct clk pioABCD_clk = { + .name = "pioABCD_clk", + .pmc_mask = 1 << AT91CAP9_ID_PIOABCD, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mpb0_clk = { + .name = "mpb0_clk", + .pmc_mask = 1 << AT91CAP9_ID_MPB0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mpb1_clk = { + .name = "mpb1_clk", + .pmc_mask = 1 << AT91CAP9_ID_MPB1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mpb2_clk = { + .name = "mpb2_clk", + .pmc_mask = 1 << AT91CAP9_ID_MPB2, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mpb3_clk = { + .name = "mpb3_clk", + .pmc_mask = 1 << AT91CAP9_ID_MPB3, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mpb4_clk = { + .name = "mpb4_clk", + .pmc_mask = 1 << AT91CAP9_ID_MPB4, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart0_clk = { + .name = "usart0_clk", + .pmc_mask = 1 << AT91CAP9_ID_US0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart1_clk = { + .name = "usart1_clk", + .pmc_mask = 1 << AT91CAP9_ID_US1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk usart2_clk = { + .name = "usart2_clk", + .pmc_mask = 1 << AT91CAP9_ID_US2, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mmc0_clk = { + .name = "mci0_clk", + .pmc_mask = 1 << AT91CAP9_ID_MCI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk mmc1_clk = { + .name = "mci1_clk", + .pmc_mask = 1 << AT91CAP9_ID_MCI1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk can_clk = { + .name = "can_clk", + .pmc_mask = 1 << AT91CAP9_ID_CAN, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk twi_clk = { + .name = "twi_clk", + .pmc_mask = 1 << AT91CAP9_ID_TWI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi0_clk = { + .name = "spi0_clk", + .pmc_mask = 1 << AT91CAP9_ID_SPI0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk spi1_clk = { + .name = "spi1_clk", + .pmc_mask = 1 << AT91CAP9_ID_SPI1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ssc0_clk = { + .name = "ssc0_clk", + .pmc_mask = 1 << AT91CAP9_ID_SSC0, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ssc1_clk = { + .name = "ssc1_clk", + .pmc_mask = 1 << AT91CAP9_ID_SSC1, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ac97_clk = { + .name = "ac97_clk", + .pmc_mask = 1 << AT91CAP9_ID_AC97C, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk tcb_clk = { + .name = "tcb_clk", + .pmc_mask = 1 << AT91CAP9_ID_TCB, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk pwmc_clk = { + .name = "pwmc_clk", + .pmc_mask = 1 << AT91CAP9_ID_PWMC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk macb_clk = { + .name = "macb_clk", + .pmc_mask = 1 << AT91CAP9_ID_EMAC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk aestdes_clk = { + .name = "aestdes_clk", + .pmc_mask = 1 << AT91CAP9_ID_AESTDES, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk adc_clk = { + .name = "adc_clk", + .pmc_mask = 1 << AT91CAP9_ID_ADC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk isi_clk = { + .name = "isi_clk", + .pmc_mask = 1 << AT91CAP9_ID_ISI, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk lcdc_clk = { + .name = "lcdc_clk", + .pmc_mask = 1 << AT91CAP9_ID_LCDC, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk dma_clk = { + .name = "dma_clk", + .pmc_mask = 1 << AT91CAP9_ID_DMA, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk udphs_clk = { + .name = "udphs_clk", + .pmc_mask = 1 << AT91CAP9_ID_UDPHS, + .type = CLK_TYPE_PERIPHERAL, +}; +static struct clk ohci_clk = { + .name = "ohci_clk", + .pmc_mask = 1 << AT91CAP9_ID_UHP, + .type = CLK_TYPE_PERIPHERAL, +}; + +static struct clk *periph_clocks[] __initdata = { + &pioABCD_clk, + &mpb0_clk, + &mpb1_clk, + &mpb2_clk, + &mpb3_clk, + &mpb4_clk, + &usart0_clk, + &usart1_clk, + &usart2_clk, + &mmc0_clk, + &mmc1_clk, + &can_clk, + &twi_clk, + &spi0_clk, + &spi1_clk, + &ssc0_clk, + &ssc1_clk, + &ac97_clk, + &tcb_clk, + &pwmc_clk, + &macb_clk, + &aestdes_clk, + &adc_clk, + &isi_clk, + &lcdc_clk, + &dma_clk, + &udphs_clk, + &ohci_clk, + // irq0 .. irq1 +}; + +/* + * The four programmable clocks. + * You must configure pin multiplexing to bring these signals out. + */ +static struct clk pck0 = { + .name = "pck0", + .pmc_mask = AT91_PMC_PCK0, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 0, +}; +static struct clk pck1 = { + .name = "pck1", + .pmc_mask = AT91_PMC_PCK1, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 1, +}; +static struct clk pck2 = { + .name = "pck2", + .pmc_mask = AT91_PMC_PCK2, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 2, +}; +static struct clk pck3 = { + .name = "pck3", + .pmc_mask = AT91_PMC_PCK3, + .type = CLK_TYPE_PROGRAMMABLE, + .id = 3, +}; + +static void __init at91cap9_register_clocks(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) + clk_register(periph_clocks[i]); + + clk_register(&pck0); + clk_register(&pck1); + clk_register(&pck2); + clk_register(&pck3); +} + +/* -------------------------------------------------------------------- + * GPIO + * -------------------------------------------------------------------- */ + +static struct at91_gpio_bank at91cap9_gpio[] = { + { + .id = AT91CAP9_ID_PIOABCD, + .offset = AT91_PIOA, + .clock = &pioABCD_clk, + }, { + .id = AT91CAP9_ID_PIOABCD, + .offset = AT91_PIOB, + .clock = &pioABCD_clk, + }, { + .id = AT91CAP9_ID_PIOABCD, + .offset = AT91_PIOC, + .clock = &pioABCD_clk, + }, { + .id = AT91CAP9_ID_PIOABCD, + .offset = AT91_PIOD, + .clock = &pioABCD_clk, + } +}; + +static void at91cap9_reset(void) +{ + at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); +} + +/* -------------------------------------------------------------------- + * AT91CAP9 processor initialization + * -------------------------------------------------------------------- */ + +void __init at91cap9_initialize(unsigned long main_clock) +{ + /* Map peripherals */ + iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc)); + + at91_arch_reset = at91cap9_reset; + at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); + + /* Init clock subsystem */ + at91_clock_init(main_clock); + + /* Register the processor-specific clocks */ + at91cap9_register_clocks(); + + /* Register GPIO subsystem */ + at91_gpio_init(at91cap9_gpio, 4); +} + +/* -------------------------------------------------------------------- + * Interrupt initialization + * -------------------------------------------------------------------- */ + +/* + * The default interrupt priority levels (0 = lowest, 7 = highest). + */ +static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = { + 7, /* Advanced Interrupt Controller (FIQ) */ + 7, /* System Peripherals */ + 1, /* Parallel IO Controller A, B, C and D */ + 0, /* MP Block Peripheral 0 */ + 0, /* MP Block Peripheral 1 */ + 0, /* MP Block Peripheral 2 */ + 0, /* MP Block Peripheral 3 */ + 0, /* MP Block Peripheral 4 */ + 5, /* USART 0 */ + 5, /* USART 1 */ + 5, /* USART 2 */ + 0, /* Multimedia Card Interface 0 */ + 0, /* Multimedia Card Interface 1 */ + 3, /* CAN */ + 6, /* Two-Wire Interface */ + 5, /* Serial Peripheral Interface 0 */ + 5, /* Serial Peripheral Interface 1 */ + 4, /* Serial Synchronous Controller 0 */ + 4, /* Serial Synchronous Controller 1 */ + 5, /* AC97 Controller */ + 0, /* Timer Counter 0, 1 and 2 */ + 0, /* Pulse Width Modulation Controller */ + 3, /* Ethernet */ + 0, /* Advanced Encryption Standard, Triple DES*/ + 0, /* Analog-to-Digital Converter */ + 0, /* Image Sensor Interface */ + 3, /* LCD Controller */ + 0, /* DMA Controller */ + 2, /* USB Device Port */ + 2, /* USB Host port */ + 0, /* Advanced Interrupt Controller (IRQ0) */ + 0, /* Advanced Interrupt Controller (IRQ1) */ +}; + +void __init at91cap9_init_interrupts(unsigned int priority[NR_AIC_IRQS]) +{ + if (!priority) + priority = at91cap9_default_irq_priority; + + /* Initialize the AIC interrupt controller */ + at91_aic_init(priority); + + /* Enable GPIO interrupts */ + at91_gpio_irq_setup(); +} diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c new file mode 100644 index 000000000000..c50fad9cd143 --- /dev/null +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -0,0 +1,1066 @@ +/* + * arch/arm/mach-at91/at91cap9_devices.c + * + * Copyright (C) 2007 Stelian Pop + * Copyright (C) 2007 Lead Tech Design + * Copyright (C) 2007 Atmel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ +#include +#include + +#include +#include +#include + +#include