From bf4735a46a6b8dfc1a951f05683e80374d8baa70 Mon Sep 17 00:00:00 2001 From: Don Mullis Date: Sun, 10 Dec 2006 02:18:37 -0800 Subject: [PATCH] Kconfig refactoring for better menu nesting Refactor Kconfig content to maximize nesting of menus by menuconfig and xconfig. Tested by simultaneously running `make xconfig` with and without patch, and comparing displays. Signed-off-by: Don Mullis Signed-off-by: Randy Dunlap Cc: Sam Ravnborg Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/parport/Kconfig | 6 ++--- drivers/pci/hotplug/Kconfig | 3 ++- drivers/serial/Kconfig | 53 ++++++++++++++++++++++----------------------- lib/Kconfig.debug | 49 +++++++++++++++++++++-------------------- 4 files changed, 56 insertions(+), 55 deletions(-) diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig index c7fa28a28b9f..36c6a1bfe558 100644 --- a/drivers/parport/Kconfig +++ b/drivers/parport/Kconfig @@ -82,9 +82,6 @@ config PARPORT_PC_PCMCIA Say Y here if you need PCMCIA support for your PC-style parallel ports. If unsure, say N. -config PARPORT_NOT_PC - bool - config PARPORT_IP32 tristate "SGI IP32 builtin port (EXPERIMENTAL)" depends on SGI_IP32 && PARPORT && EXPERIMENTAL @@ -158,5 +155,8 @@ config PARPORT_1284 transfer modes. Also say Y if you want device ID information to appear in /proc/sys/dev/parport/*/autoprobe*. It is safe to say N. +config PARPORT_NOT_PC + bool + endmenu diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig index 6e780db9454d..adce4204d87d 100644 --- a/drivers/pci/hotplug/Kconfig +++ b/drivers/pci/hotplug/Kconfig @@ -76,7 +76,8 @@ config HOTPLUG_PCI_IBM config HOTPLUG_PCI_ACPI tristate "ACPI PCI Hotplug driver" - depends on (!ACPI_DOCK && ACPI && HOTPLUG_PCI) || (ACPI_DOCK && HOTPLUG_PCI) + depends on HOTPLUG_PCI + depends on (!ACPI_DOCK && ACPI) || (ACPI_DOCK) help Say Y here if you have a system that supports PCI Hotplug using ACPI. diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index fc12d5df10e2..0b36dd5cdac2 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -151,32 +151,6 @@ config SERIAL_8250_MANY_PORTS say N here to save some memory. You can also say Y if you have an "intelligent" multiport card such as Cyclades, Digiboards, etc. -config SERIAL_8250_SHARE_IRQ - bool "Support for sharing serial interrupts" - depends on SERIAL_8250_EXTENDED - help - Some serial boards have hardware support which allows multiple dumb - serial ports on the same board to share a single IRQ. To enable - support for this in the serial driver, say Y here. - -config SERIAL_8250_DETECT_IRQ - bool "Autodetect IRQ on standard ports (unsafe)" - depends on SERIAL_8250_EXTENDED - help - Say Y here if you want the kernel to try to guess which IRQ - to use for your serial port. - - This is considered unsafe; it is far better to configure the IRQ in - a boot script using the setserial command. - - If unsure, say N. - -config SERIAL_8250_RSA - bool "Support RSA serial ports" - depends on SERIAL_8250_EXTENDED - help - ::: To be written ::: - # # Multi-port serial cards # @@ -199,7 +173,6 @@ config SERIAL_8250_ACCENT To compile this driver as a module, choose M here: the module will be called 8250_accent. - config SERIAL_8250_BOCA tristate "Support Boca cards" depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS @@ -230,6 +203,32 @@ config SERIAL_8250_HUB6 To compile this driver as a module, choose M here: the module will be called 8250_hub6. +config SERIAL_8250_SHARE_IRQ + bool "Support for sharing serial interrupts" + depends on SERIAL_8250_EXTENDED + help + Some serial boards have hardware support which allows multiple dumb + serial ports on the same board to share a single IRQ. To enable + support for this in the serial driver, say Y here. + +config SERIAL_8250_DETECT_IRQ + bool "Autodetect IRQ on standard ports (unsafe)" + depends on SERIAL_8250_EXTENDED + help + Say Y here if you want the kernel to try to guess which IRQ + to use for your serial port. + + This is considered unsafe; it is far better to configure the IRQ in + a boot script using the setserial command. + + If unsure, say N. + +config SERIAL_8250_RSA + bool "Support RSA serial ports" + depends on SERIAL_8250_EXTENDED + help + ::: To be written ::: + config SERIAL_8250_MCA tristate "Support 8250-type ports on MCA buses" depends on SERIAL_8250 != n && MCA diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 6eccc643c32e..0701ddda1df8 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -47,6 +47,30 @@ config UNUSED_SYMBOLS you really need it, and what the merge plan to the mainline kernel for your module is. +config DEBUG_FS + bool "Debug Filesystem" + depends on SYSFS + help + debugfs is a virtual file system that kernel developers use to put + debugging files into. Enable this option to be able to read and + write to these files. + + If unsure, say N. + +config HEADERS_CHECK + bool "Run 'make headers_check' when building vmlinux" + depends on !UML + help + This option will extract the user-visible kernel headers whenever + building the kernel, and will run basic sanity checks on them to + ensure that exported files do not attempt to include files which + were not exported, etc. + + If you're making modifications to header files which are + relevant for userspace, say 'Y', and check the headers + exported to $(INSTALL_HDR_PATH) (usually 'usr/include' in + your build tree), to make sure they're suitable. + config DEBUG_KERNEL bool "Kernel debugging" help @@ -302,16 +326,6 @@ config DEBUG_INFO If unsure, say N. -config DEBUG_FS - bool "Debug Filesystem" - depends on SYSFS - help - debugfs is a virtual file system that kernel developers use to put - debugging files into. Enable this option to be able to read and - write to these files. - - If unsure, say N. - config DEBUG_VM bool "Debug VM" depends on DEBUG_KERNEL @@ -372,20 +386,6 @@ config FORCED_INLINING become the default in the future, until then this option is there to test gcc for this. -config HEADERS_CHECK - bool "Run 'make headers_check' when building vmlinux" - depends on !UML - help - This option will extract the user-visible kernel headers whenever - building the kernel, and will run basic sanity checks on them to - ensure that exported files do not attempt to include files which - were not exported, etc. - - If you're making modifications to header files which are - relevant for userspace, say 'Y', and check the headers - exported to $(INSTALL_HDR_PATH) (usually 'usr/include' in - your build tree), to make sure they're suitable. - config RCU_TORTURE_TEST tristate "torture tests for RCU" depends on DEBUG_KERNEL @@ -402,6 +402,7 @@ config RCU_TORTURE_TEST config LKDTM tristate "Linux Kernel Dump Test Tool Module" + depends on DEBUG_KERNEL depends on KPROBES default n help -- cgit v1.2.3-59-g8ed1b