From bb133450ee95746a9387f12de8bd738e79c21433 Mon Sep 17 00:00:00 2001 From: Hans-Christian Egtvedt Date: Tue, 30 Oct 2007 14:56:20 +0100 Subject: [WATCHDOG] at32ap700x_wdt: add support for boot status and add fix for silicon errata This patch enables the watchdog to read out the reset cause after a boot and provide this to the user. The driver will now also return -EIO if probed when booting from a watchdog reset. This is due to a silicon errata in the AT32AP700x devices. Detailed description and work-arounds can be found in the errata section of the datasheet avilable from http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 Signed-off-by: Hans-Christian Egtvedt Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/watchdog/at32ap700x_wdt.c | 69 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 65 insertions(+), 4 deletions(-) diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c index 54a516169d07..fb5ed6478f78 100644 --- a/drivers/watchdog/at32ap700x_wdt.c +++ b/drivers/watchdog/at32ap700x_wdt.c @@ -6,6 +6,19 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. + * + * + * Errata: WDT Clear is blocked after WDT Reset + * + * A watchdog timer event will, after reset, block writes to the WDT_CLEAR + * register, preventing the program to clear the next Watchdog Timer Reset. + * + * If you still want to use the WDT after a WDT reset a small code can be + * insterted at the startup checking the AVR32_PM.rcause register for WDT reset + * and use a GPIO pin to reset the system. This method requires that one of the + * GPIO pins are available and connected externally to the RESET_N pin. After + * the GPIO pin has pulled down the reset line the GPIO will be reset and leave + * the pin tristated with pullup. */ #include @@ -44,6 +57,13 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" #define WDT_CLR 0x04 +#define WDT_RCAUSE 0x10 +#define WDT_RCAUSE_POR 0 +#define WDT_RCAUSE_EXT 2 +#define WDT_RCAUSE_WDT 3 +#define WDT_RCAUSE_JTAG 4 +#define WDT_RCAUSE_SERP 5 + #define WDT_BIT(name) (1 << WDT_##name) #define WDT_BF(name, value) ((value) << WDT_##name) @@ -56,6 +76,7 @@ struct wdt_at32ap700x { void __iomem *regs; spinlock_t io_lock; int timeout; + int boot_status; unsigned long users; struct miscdevice miscdev; }; @@ -126,7 +147,7 @@ static int at32_wdt_close(struct inode *inode, struct file *file) at32_wdt_stop(); } else { dev_dbg(wdt->miscdev.parent, - "Unexpected close, not stopping watchdog!\n"); + "unexpected close, not stopping watchdog!\n"); at32_wdt_pat(); } clear_bit(1, &wdt->users); @@ -154,6 +175,33 @@ static int at32_wdt_settimeout(int time) return 0; } +/* + * Get the watchdog status. + */ +static int at32_wdt_get_status(void) +{ + int rcause; + int status = 0; + + rcause = wdt_readl(wdt, RCAUSE); + + switch (rcause) { + case WDT_BIT(RCAUSE_EXT): + status = WDIOF_EXTERN1; + break; + case WDT_BIT(RCAUSE_WDT): + status = WDIOF_CARDRESET; + break; + case WDT_BIT(RCAUSE_POR): /* fall through */ + case WDT_BIT(RCAUSE_JTAG): /* fall through */ + case WDT_BIT(RCAUSE_SERP): /* fall through */ + default: + break; + } + + return status; +} + static struct watchdog_info at32_wdt_info = { .identity = "at32ap700x watchdog", .options = WDIOF_SETTIMEOUT | @@ -194,10 +242,12 @@ static int at32_wdt_ioctl(struct inode *inode, struct file *file, case WDIOC_GETTIMEOUT: ret = put_user(wdt->timeout, p); break; - case WDIOC_GETSTATUS: /* fall through */ - case WDIOC_GETBOOTSTATUS: + case WDIOC_GETSTATUS: ret = put_user(0, p); break; + case WDIOC_GETBOOTSTATUS: + ret = put_user(wdt->boot_status, p); + break; case WDIOC_SETOPTIONS: ret = get_user(time, p); if (ret) @@ -282,8 +332,19 @@ static int __init at32_wdt_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "could not map I/O memory\n"); goto err_free; } + spin_lock_init(&wdt->io_lock); - wdt->users = 0; + wdt->boot_status = at32_wdt_get_status(); + + /* Work-around for watchdog silicon errata. */ + if (wdt->boot_status & WDIOF_CARDRESET) { + dev_info(&pdev->dev, "CPU must be reset with external " + "reset or POR due to silicon errata.\n"); + ret = -EIO; + goto err_iounmap; + } else { + wdt->users = 0; + } wdt->miscdev.minor = WATCHDOG_MINOR; wdt->miscdev.name = "watchdog"; wdt->miscdev.fops = &at32_wdt_fops; -- cgit v1.2.3-59-g8ed1b From 3ff6eb4a2fe5757cbe7c5d57c8eb60ab0775f2f0 Mon Sep 17 00:00:00 2001 From: Samuel Tardieu Date: Sun, 4 Nov 2007 20:20:23 +0100 Subject: [WATCHDOG] Stop looking for device as soon as one is found If no address is given for the W83697HF/HG watchdog IO port, stop looping through possible locations when a watchdog device has been found. Signed-off-by: Samuel Tardieu Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/w83697hf_wdt.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c index c622a0e6c9ae..6ea125eabeaa 100644 --- a/drivers/watchdog/w83697hf_wdt.c +++ b/drivers/watchdog/w83697hf_wdt.c @@ -382,8 +382,10 @@ wdt_init(void) /* we will autodetect the W83697HF/HG watchdog */ for (i = 0; ((!found) && (w83697hf_ioports[i] != 0)); i++) { wdt_io = w83697hf_ioports[i]; - if (!w83697hf_check_wdt()) + if (!w83697hf_check_wdt()) { found++; + break; + } } } else { if (!w83697hf_check_wdt()) -- cgit v1.2.3-59-g8ed1b From bf6350a3dfcbd0a0811d7c210beacb66e90eca47 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Sat, 10 Nov 2007 05:58:44 +0100 Subject: [WATCHDOG] bfin_wdt, remove SPIN_LOCK_UNLOCKED bfin_wdt, remove SPIN_LOCK_UNLOCKED SPIN_LOCK_UNLOCKED is deprecated, use DEFINE_SPINLOCK instead Signed-off-by: Jiri Slaby Acked-by: Mike Frysinger Cc: Bryan Wu Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/watchdog/bfin_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c index 309d27913fc1..31dc7a69e90c 100644 --- a/drivers/watchdog/bfin_wdt.c +++ b/drivers/watchdog/bfin_wdt.c @@ -71,7 +71,7 @@ static int nowayout = WATCHDOG_NOWAYOUT; static struct watchdog_info bfin_wdt_info; static unsigned long open_check; static char expect_close; -static spinlock_t bfin_wdt_spinlock = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(bfin_wdt_spinlock); /** * bfin_wdt_keepalive - Keep the Userspace Watchdog Alive -- cgit v1.2.3-59-g8ed1b From 6027f661f8da653f084df80f4aade21359bcea35 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Sat, 10 Nov 2007 04:32:45 +0100 Subject: [WATCHDOG] Sbus: cpwatchdog, remove SPIN_LOCK_UNLOCKED cpwatchdog, remove SPIN_LOCK_UNLOCKED SPIN_LOCK_UNLOCKED is deprecated, use __SPIN_LOCK_UNLOCKED with an unique name instead Signed-off-by: Jiri Slaby Cc: "David S. Miller" Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/sbus/char/cpwatchdog.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/sbus/char/cpwatchdog.c b/drivers/sbus/char/cpwatchdog.c index 7b5773d88212..a4e758143665 100644 --- a/drivers/sbus/char/cpwatchdog.c +++ b/drivers/sbus/char/cpwatchdog.c @@ -154,7 +154,7 @@ struct wd_device { }; static struct wd_device wd_dev = { - 0, SPIN_LOCK_UNLOCKED, 0, 0, 0, 0, + 0, __SPIN_LOCK_UNLOCKED(wd_dev.lock), 0, 0, 0, 0, }; static struct timer_list wd_timer; -- cgit v1.2.3-59-g8ed1b From 38ff6fd2fa4959925cf217ccaebea90fabd8ce04 Mon Sep 17 00:00:00 2001 From: "Jorge Boncompte [DTI2]" Date: Mon, 19 Nov 2007 15:09:21 +0100 Subject: [WATCHDOG] IT8212F watchdog driver This patch adds support for the ITE Tech Inc. IT8712F EC-LPC Super I/O chipset found on many Pentium III and AMD motherboards. Developed using code from other watchdog drivers and the datasheet on ITE Tech homepage. Signed-off-by: Jorge Boncompte Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/Kconfig | 10 ++ drivers/watchdog/Makefile | 1 + drivers/watchdog/it8712f_wdt.c | 400 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 411 insertions(+) create mode 100644 drivers/watchdog/it8712f_wdt.c diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 2792bc1a7269..126b554810c8 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -392,6 +392,16 @@ config ITCO_VENDOR_SUPPORT devices. At this moment we only have additional support for some SuperMicro Inc. motherboards. +config IT8712F_WDT + tristate "IT8712F (Smart Guardian) Watchdog Timer" + depends on X86 + ---help--- + This is the driver for the built-in watchdog timer on the IT8712F + Super I/0 chipset used on many motherboards. + + To compile this driver as a module, choose M here: the + module will be called it8712f_wdt. + config SC1200_WDT tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog" depends on X86 diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 7d9e5734f8bb..e4779f76b1ed 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -66,6 +66,7 @@ obj-$(CONFIG_IBMASR) += ibmasr.o obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o iTCO_vendor_support.o +obj-$(CONFIG_IT8712F_WDT) += it8712f_wdt.o obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o obj-$(CONFIG_PC87413_WDT) += pc87413_wdt.o diff --git a/drivers/watchdog/it8712f_wdt.c b/drivers/watchdog/it8712f_wdt.c new file mode 100644 index 000000000000..6330fc02464e --- /dev/null +++ b/drivers/watchdog/it8712f_wdt.c @@ -0,0 +1,400 @@ +/* + * IT8712F "Smart Guardian" Watchdog support + * + * Copyright (c) 2006-2007 Jorge Boncompte - DTI2 + * + * Based on info and code taken from: + * + * drivers/char/watchdog/scx200_wdt.c + * drivers/hwmon/it87.c + * IT8712F EC-LPC I/O Preliminary Specification 0.9.2.pdf + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * The author(s) of this software shall not be held liable for damages + * of any nature resulting due to the use of this software. This + * software is provided AS-IS with no warranties. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define NAME "it8712f_wdt" + +MODULE_AUTHOR("Jorge Boncompte - DTI2 "); +MODULE_DESCRIPTION("IT8712F Watchdog Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); + +static int margin = 60; /* in seconds */ +module_param(margin, int, 0); +MODULE_PARM_DESC(margin, "Watchdog margin in seconds"); + +static int nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); + +static struct semaphore it8712f_wdt_sem; +static unsigned expect_close; +static spinlock_t io_lock; + +/* Dog Food address - We use the game port address */ +static unsigned short address; + +#define REG 0x2e /* The register to read/write */ +#define VAL 0x2f /* The value to read/write */ + +#define LDN 0x07 /* Register: Logical device select */ +#define DEVID 0x20 /* Register: Device ID */ +#define DEVREV 0x22 /* Register: Device Revision */ +#define ACT_REG 0x30 /* LDN Register: Activation */ +#define BASE_REG 0x60 /* LDN Register: Base address */ + +#define IT8712F_DEVID 0x8712 + +#define LDN_GPIO 0x07 /* GPIO and Watch Dog Timer */ +#define LDN_GAME 0x09 /* Game Port */ + +#define WDT_CONTROL 0x71 /* WDT Register: Control */ +#define WDT_CONFIG 0x72 /* WDT Register: Configuration */ +#define WDT_TIMEOUT 0x73 /* WDT Register: Timeout Value */ + +#define WDT_RESET_GAME 0x10 +#define WDT_RESET_KBD 0x20 +#define WDT_RESET_MOUSE 0x40 +#define WDT_RESET_CIR 0x80 + +#define WDT_UNIT_SEC 0x80 /* If 0 in MINUTES */ + +#define WDT_OUT_PWROK 0x10 +#define WDT_OUT_KRST 0x40 + +static int +superio_inb(int reg) +{ + outb(reg, REG); + return inb(VAL); +} + +static void +superio_outb(int val, int reg) +{ + outb(reg, REG); + outb(val, VAL); +} + +static int +superio_inw(int reg) +{ + int val; + outb(reg++, REG); + val = inb(VAL) << 8; + outb(reg, REG); + val |= inb(VAL); + return val; +} + +static inline void +superio_select(int ldn) +{ + outb(LDN, REG); + outb(ldn, VAL); +} + +static inline void +superio_enter(void) +{ + spin_lock(&io_lock); + outb(0x87, REG); + outb(0x01, REG); + outb(0x55, REG); + outb(0x55, REG); +} + +static inline void +superio_exit(void) +{ + outb(0x02, REG); + outb(0x02, VAL); + spin_unlock(&io_lock); +} + +static inline void +it8712f_wdt_ping(void) +{ + inb(address); +} + +static void +it8712f_wdt_update_margin(void) +{ + int config = WDT_OUT_KRST | WDT_OUT_PWROK; + + printk(KERN_INFO NAME ": timer margin %d seconds\n", margin); + + /* The timeout register only has 8bits wide */ + if (margin < 256) + config |= WDT_UNIT_SEC; /* else UNIT are MINUTES */ + superio_outb(config, WDT_CONFIG); + + superio_outb((margin > 255) ? (margin / 60) : margin, WDT_TIMEOUT); +} + +static void +it8712f_wdt_enable(void) +{ + printk(KERN_DEBUG NAME ": enabling watchdog timer\n"); + superio_enter(); + superio_select(LDN_GPIO); + + superio_outb(WDT_RESET_GAME, WDT_CONTROL); + + it8712f_wdt_update_margin(); + + superio_exit(); + + it8712f_wdt_ping(); +} + +static void +it8712f_wdt_disable(void) +{ + printk(KERN_DEBUG NAME ": disabling watchdog timer\n"); + + superio_enter(); + superio_select(LDN_GPIO); + + superio_outb(0, WDT_CONFIG); + superio_outb(0, WDT_CONTROL); + superio_outb(0, WDT_TIMEOUT); + + superio_exit(); +} + +static int +it8712f_wdt_notify(struct notifier_block *this, + unsigned long code, void *unused) +{ + if (code == SYS_HALT || code == SYS_POWER_OFF) + if (!nowayout) + it8712f_wdt_disable(); + + return NOTIFY_DONE; +} + +static struct notifier_block it8712f_wdt_notifier = { + .notifier_call = it8712f_wdt_notify, +}; + +static ssize_t +it8712f_wdt_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + /* check for a magic close character */ + if (len) { + size_t i; + + it8712f_wdt_ping(); + + expect_close = 0; + for (i = 0; i < len; ++i) { + char c; + if (get_user(c, data+i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + + return len; +} + +static int +it8712f_wdt_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + static struct watchdog_info ident = { + .identity = "IT8712F Watchdog", + .firmware_version = 1, + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, + }; + int new_margin; + + switch (cmd) { + default: + return -ENOTTY; + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + return 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + it8712f_wdt_ping(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_margin, p)) + return -EFAULT; + if (new_margin < 1) + return -EINVAL; + margin = new_margin; + superio_enter(); + superio_select(LDN_GPIO); + + it8712f_wdt_update_margin(); + + superio_exit(); + it8712f_wdt_ping(); + case WDIOC_GETTIMEOUT: + if (put_user(margin, p)) + return -EFAULT; + return 0; + } +} + +static int +it8712f_wdt_open(struct inode *inode, struct file *file) +{ + /* only allow one at a time */ + if (down_trylock(&it8712f_wdt_sem)) + return -EBUSY; + it8712f_wdt_enable(); + + return nonseekable_open(inode, file); +} + +static int +it8712f_wdt_release(struct inode *inode, struct file *file) +{ + if (expect_close != 42) { + printk(KERN_WARNING NAME + ": watchdog device closed unexpectedly, will not" + " disable the watchdog timer\n"); + } else if (!nowayout) { + it8712f_wdt_disable(); + } + expect_close = 0; + up(&it8712f_wdt_sem); + + return 0; +} + +static struct file_operations it8712f_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = it8712f_wdt_write, + .ioctl = it8712f_wdt_ioctl, + .open = it8712f_wdt_open, + .release = it8712f_wdt_release, +}; + +static struct miscdevice it8712f_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &it8712f_wdt_fops, +}; + +static int __init +it8712f_wdt_find(unsigned short *address) +{ + int err = -ENODEV; + int chip_type; + + superio_enter(); + chip_type = superio_inw(DEVID); + if (chip_type != IT8712F_DEVID) + goto exit; + + superio_select(LDN_GAME); + superio_outb(1, ACT_REG); + if (!(superio_inb(ACT_REG) & 0x01)) { + printk(KERN_ERR NAME ": Device not activated, skipping\n"); + goto exit; + } + + *address = superio_inw(BASE_REG); + if (*address == 0) { + printk(KERN_ERR NAME ": Base address not set, skipping\n"); + goto exit; + } + + err = 0; + printk(KERN_DEBUG NAME ": Found IT%04xF chip revision %d - " + "using DogFood address 0x%x\n", + chip_type, superio_inb(DEVREV) & 0x0f, *address); + +exit: + superio_exit(); + return err; +} + +static int __init +it8712f_wdt_init(void) +{ + int err = 0; + + spin_lock_init(&io_lock); + + if (it8712f_wdt_find(&address)) + return -ENODEV; + + if (!request_region(address, 1, "IT8712F Watchdog")) { + printk(KERN_WARNING NAME ": watchdog I/O region busy\n"); + return -EBUSY; + } + + it8712f_wdt_disable(); + + sema_init(&it8712f_wdt_sem, 1); + + err = register_reboot_notifier(&it8712f_wdt_notifier); + if (err) { + printk(KERN_ERR NAME ": unable to register reboot notifier\n"); + goto out; + } + + err = misc_register(&it8712f_wdt_miscdev); + if (err) { + printk(KERN_ERR NAME + ": cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, err); + goto reboot_out; + } + + return 0; + + +reboot_out: + unregister_reboot_notifier(&it8712f_wdt_notifier); +out: + release_region(address, 1); + return err; +} + +static void __exit +it8712f_wdt_exit(void) +{ + misc_deregister(&it8712f_wdt_miscdev); + unregister_reboot_notifier(&it8712f_wdt_notifier); + release_region(address, 1); +} + +module_init(it8712f_wdt_init); +module_exit(it8712f_wdt_exit); -- cgit v1.2.3-59-g8ed1b From 6ce7641b879e4b9ead46e14275d9d3645b47fa63 Mon Sep 17 00:00:00 2001 From: Gary Hade Date: Tue, 20 Nov 2007 12:19:12 -0800 Subject: ACPI: acpiphp: Remove dmesg spam on device remove In cases where acpi_pci_bind() does not attach device data, acpi_pci_unbind() complains via an ACPI exception about the missing data when the device is removed. For example, acpi_pci_bind() does not attach data for non-existent device functions so when the device is removed using the ACPI PCI hotplug driver 'acpiphp' an ACPI exception is logged for every non-existent function. This patch avoids the confusing log messages by removing the unnecessary ACPI exception. Signed-off-by: Gary Hade Signed-off-by: Len Brown --- drivers/acpi/pci_bind.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/acpi/pci_bind.c b/drivers/acpi/pci_bind.c index 028969370bbf..388300de005d 100644 --- a/drivers/acpi/pci_bind.c +++ b/drivers/acpi/pci_bind.c @@ -294,9 +294,6 @@ int acpi_pci_unbind(struct acpi_device *device) acpi_get_data(device->handle, acpi_pci_data_handler, (void **)&data); if (ACPI_FAILURE(status)) { - ACPI_EXCEPTION((AE_INFO, status, - "Unable to get data from device %s", - acpi_device_bid(device))); result = -ENODEV; goto end; } -- cgit v1.2.3-59-g8ed1b From 783e6bcde4e6a7c849fa5fa7f35b0fba721ac5f4 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Tue, 20 Nov 2007 12:14:46 -0800 Subject: [WATCHDOG] ipmi: add the standard watchdog timeout ioctls Add the standard IOCTLs to the IPMI driver for setting and getting the pretimeout. Tested by Benoit Guillon. Signed off by: Corey Minyard Cc: Benoit Guillon Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/char/ipmi/ipmi_watchdog.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/char/ipmi/ipmi_watchdog.c b/drivers/char/ipmi/ipmi_watchdog.c index e686fc925168..8f45ca9235ad 100644 --- a/drivers/char/ipmi/ipmi_watchdog.c +++ b/drivers/char/ipmi/ipmi_watchdog.c @@ -669,6 +669,7 @@ static int ipmi_ioctl(struct inode *inode, struct file *file, return 0; case WDIOC_SET_PRETIMEOUT: + case WDIOC_SETPRETIMEOUT: i = copy_from_user(&val, argp, sizeof(int)); if (i) return -EFAULT; @@ -676,6 +677,7 @@ static int ipmi_ioctl(struct inode *inode, struct file *file, return ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY); case WDIOC_GET_PRETIMEOUT: + case WDIOC_GETPRETIMEOUT: i = copy_to_user(argp, &pretimeout, sizeof(pretimeout)); if (i) return -EFAULT; -- cgit v1.2.3-59-g8ed1b From c4c283357d865aad1f124c069f5f6e3f39e76790 Mon Sep 17 00:00:00 2001 From: Gilles Gigan Date: Wed, 31 Oct 2007 16:31:42 +1000 Subject: [WATCHDOG] add Nano 7240 driver Adds support for the built-in watchdog on EPIC Nano 7240 boards from IEI. Tested on Nano-7240RS. Hardware documentation of the platform (including watchdog) can be found on the IEI website: http://www.ieiworld.com Signed-off-by: Gilles Gigan Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/Kconfig | 13 ++ drivers/watchdog/Makefile | 1 + drivers/watchdog/sbc7240_wdt.c | 324 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 338 insertions(+) create mode 100644 drivers/watchdog/sbc7240_wdt.c diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 126b554810c8..52dff40ec192 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -466,6 +466,19 @@ config SBC8360_WDT Most people will say N. +config SBC7240_WDT + tristate "SBC Nano 7240 Watchdog Timer" + depends on X86_32 + ---help--- + This is the driver for the hardware watchdog found on the IEI + single board computers EPIC Nano 7240 (and likely others). This + watchdog simply watches your kernel to make sure it doesn't freeze, + and if it does, it reboots your computer after a certain amount of + time. + + To compile this driver as a module, choose M here: the + module will be called sbc7240_wdt. + config CPU5_WDT tristate "SMA CPU5 Watchdog" depends on X86 diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index e4779f76b1ed..87483cc63252 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -72,6 +72,7 @@ obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o obj-$(CONFIG_PC87413_WDT) += pc87413_wdt.o obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o obj-$(CONFIG_SBC8360_WDT) += sbc8360.o +obj-$(CONFIG_SBC7240_WDT) += sbc7240_wdt.o obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o obj-$(CONFIG_SMSC37B787_WDT) += smsc37b787_wdt.o obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o diff --git a/drivers/watchdog/sbc7240_wdt.c b/drivers/watchdog/sbc7240_wdt.c new file mode 100644 index 000000000000..4c8cefbd8627 --- /dev/null +++ b/drivers/watchdog/sbc7240_wdt.c @@ -0,0 +1,324 @@ +/* + * NANO7240 SBC Watchdog device driver + * + * Based on w83877f.c by Scott Jennings, + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * (c) Copyright 2007 Gilles GIGAN + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define SBC7240_PREFIX "sbc7240_wdt: " + +#define SBC7240_ENABLE_PORT 0x443 +#define SBC7240_DISABLE_PORT 0x043 +#define SBC7240_SET_TIMEOUT_PORT SBC7240_ENABLE_PORT +#define SBC7240_MAGIC_CHAR 'V' + +#define SBC7240_TIMEOUT 30 +#define SBC7240_MAX_TIMEOUT 255 +static int timeout = SBC7240_TIMEOUT; /* in seconds */ +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=" + __MODULE_STRING(SBC7240_MAX_TIMEOUT) ", default=" + __MODULE_STRING(SBC7240_TIMEOUT) ")"); + +static int nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, "Disable watchdog when closing device file"); + +#define SBC7240_OPEN_STATUS_BIT 0 +#define SBC7240_ENABLED_STATUS_BIT 1 +#define SBC7240_EXPECT_CLOSE_STATUS_BIT 2 +static unsigned long wdt_status; + +/* + * Utility routines + */ + +static void wdt_disable(void) +{ + /* disable the watchdog */ + if (test_and_clear_bit(SBC7240_ENABLED_STATUS_BIT, &wdt_status)) { + inb_p(SBC7240_DISABLE_PORT); + printk(KERN_INFO SBC7240_PREFIX + "Watchdog timer is now disabled.\n"); + } +} + +static void wdt_enable(void) +{ + /* enable the watchdog */ + if (!test_and_set_bit(SBC7240_ENABLED_STATUS_BIT, &wdt_status)) { + inb_p(SBC7240_ENABLE_PORT); + printk(KERN_INFO SBC7240_PREFIX + "Watchdog timer is now enabled.\n"); + } +} + +static int wdt_set_timeout(int t) +{ + if (t < 1 || t > SBC7240_MAX_TIMEOUT) { + printk(KERN_ERR SBC7240_PREFIX + "timeout value must be 1<=x<=%d\n", + SBC7240_MAX_TIMEOUT); + return -1; + } + /* set the timeout */ + outb_p((unsigned)t, SBC7240_SET_TIMEOUT_PORT); + timeout = t; + printk(KERN_INFO SBC7240_PREFIX "timeout set to %d seconds\n", t); + return 0; +} + +/* Whack the dog */ +static inline void wdt_keepalive(void) +{ + if (test_bit(SBC7240_ENABLED_STATUS_BIT, &wdt_status)) + inb_p(SBC7240_ENABLE_PORT); +} + +/* + * /dev/watchdog handling + */ +static ssize_t fop_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + size_t i; + char c; + + if (count) { + if (!nowayout) { + clear_bit(SBC7240_EXPECT_CLOSE_STATUS_BIT, + &wdt_status); + + /* is there a magic char ? */ + for (i = 0; i != count; i++) { + if (get_user(c, buf + i)) + return -EFAULT; + if (c == SBC7240_MAGIC_CHAR) { + set_bit(SBC7240_EXPECT_CLOSE_STATUS_BIT, + &wdt_status); + break; + } + } + } + + wdt_keepalive(); + } + + return count; +} + +static int fop_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(SBC7240_OPEN_STATUS_BIT, &wdt_status)) + return -EBUSY; + + wdt_enable(); + + return nonseekable_open(inode, file); +} + +static int fop_close(struct inode *inode, struct file *file) +{ + if (test_and_clear_bit(SBC7240_EXPECT_CLOSE_STATUS_BIT, &wdt_status) + || !nowayout) { + wdt_disable(); + } else { + printk(KERN_CRIT SBC7240_PREFIX + "Unexpected close, not stopping watchdog!\n"); + wdt_keepalive(); + } + + clear_bit(SBC7240_OPEN_STATUS_BIT, &wdt_status); + return 0; +} + +static struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING| + WDIOF_SETTIMEOUT| + WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = "SBC7240", +}; + + +static int fop_ioctl(struct inode *inode, struct file *file, unsigned int cmd, + unsigned long arg) +{ + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user + ((void __user *)arg, &ident, sizeof(ident)) + ? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, (int __user *)arg); + case WDIOC_KEEPALIVE: + wdt_keepalive(); + return 0; + case WDIOC_SETOPTIONS:{ + int options; + int retval = -EINVAL; + + if (get_user(options, (int __user *)arg)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + wdt_disable(); + retval = 0; + } + + if (options & WDIOS_ENABLECARD) { + wdt_enable(); + retval = 0; + } + + return retval; + } + case WDIOC_SETTIMEOUT:{ + int new_timeout; + + if (get_user(new_timeout, (int __user *)arg)) + return -EFAULT; + + if (wdt_set_timeout(new_timeout)) + return -EINVAL; + + /* Fall through */ + } + case WDIOC_GETTIMEOUT: + return put_user(timeout, (int __user *)arg); + default: + return -ENOTTY; + } +} + +static const struct file_operations wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = fop_write, + .open = fop_open, + .release = fop_close, + .ioctl = fop_ioctl, +}; + +static struct miscdevice wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &wdt_fops, +}; + +/* + * Notifier for system down + */ + +static int wdt_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + wdt_disable(); + return NOTIFY_DONE; +} + +static struct notifier_block wdt_notifier = { + .notifier_call = wdt_notify_sys, +}; + +static void __exit sbc7240_wdt_unload(void) +{ + printk(KERN_INFO SBC7240_PREFIX "Removing watchdog\n"); + misc_deregister(&wdt_miscdev); + + unregister_reboot_notifier(&wdt_notifier); + release_region(SBC7240_ENABLE_PORT, 1); +} + +static int __init sbc7240_wdt_init(void) +{ + int rc = -EBUSY; + + if (!request_region(SBC7240_ENABLE_PORT, 1, "SBC7240 WDT")) { + printk(KERN_ERR SBC7240_PREFIX + "I/O address 0x%04x already in use\n", + SBC7240_ENABLE_PORT); + rc = -EIO; + goto err_out; + } + + /* The IO port 0x043 used to disable the watchdog + * is already claimed by the system timer, so we + * cant request_region() it ...*/ + + if (timeout < 1 || timeout > SBC7240_MAX_TIMEOUT) { + timeout = SBC7240_TIMEOUT; + printk(KERN_INFO SBC7240_PREFIX + "timeout value must be 1<=x<=%d, using %d\n", + SBC7240_MAX_TIMEOUT, timeout); + } + wdt_set_timeout(timeout); + wdt_disable(); + + rc = register_reboot_notifier(&wdt_notifier); + if (rc) { + printk(KERN_ERR SBC7240_PREFIX + "cannot register reboot notifier (err=%d)\n", rc); + goto err_out_region; + } + + rc = misc_register(&wdt_miscdev); + if (rc) { + printk(KERN_ERR SBC7240_PREFIX + "cannot register miscdev on minor=%d (err=%d)\n", + wdt_miscdev.minor, rc); + goto err_out_reboot_notifier; + } + + printk(KERN_INFO SBC7240_PREFIX + "Watchdog driver for SBC7240 initialised (nowayout=%d)\n", + nowayout); + + return 0; + +err_out_reboot_notifier: + unregister_reboot_notifier(&wdt_notifier); +err_out_region: + release_region(SBC7240_ENABLE_PORT, 1); +err_out: + return rc; +} + +module_init(sbc7240_wdt_init); +module_exit(sbc7240_wdt_unload); + +MODULE_AUTHOR("Gilles Gigan"); +MODULE_DESCRIPTION("Watchdog device driver for single board" + " computers EPIC Nano 7240 from iEi"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); + -- cgit v1.2.3-59-g8ed1b From ad40e68bf5c54831cd6b2199fd24d616bac179f7 Mon Sep 17 00:00:00 2001 From: Andrey Borzenkov Date: Sat, 10 Nov 2007 20:02:49 +0300 Subject: ACPI: battery: fix ACPI battery technology reporting At least some systems report technology information with trailing spaces: {pts/1}% cat -E /var/tmp/bat/2.6.23 | grep type battery type: Li-ION $ Use strncasecmp to compare model string to skip trailing part Signed-off-by: Andrey Borzenkov Acked-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/battery.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index 7d6be23eff89..8f7505d304b5 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -125,7 +125,7 @@ static int acpi_battery_technology(struct acpi_battery *battery) return POWER_SUPPLY_TECHNOLOGY_NiMH; if (!strcasecmp("LION", battery->type)) return POWER_SUPPLY_TECHNOLOGY_LION; - if (!strcasecmp("LI-ION", battery->type)) + if (!strncasecmp("LI-ION", battery->type, 6)) return POWER_SUPPLY_TECHNOLOGY_LION; if (!strcasecmp("LiP", battery->type)) return POWER_SUPPLY_TECHNOLOGY_LIPO; -- cgit v1.2.3-59-g8ed1b From a0113a99cc3cd1a63153d11b7fcf9c1a2000df57 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Sun, 25 Nov 2007 08:55:34 +0100 Subject: [ARM] 4667/1: CM-X270 fixes Change printk to dev_dbg in ITE 8152 driver and remove printk in ITE 8152 ISR. Move PCI intialization from ->scan to ->preinit method Signed-off-by: Mike Rapoport Signed-off-by: Russell King --- arch/arm/Kconfig | 8 +++++++- arch/arm/common/it8152.c | 10 ++-------- arch/arm/mach-pxa/cm-x270-pci.c | 18 ++++++++---------- 3 files changed, 17 insertions(+), 19 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a7e9fea978a6..c4de2d4664d7 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -537,7 +537,7 @@ config ISA_DMA_API bool config PCI - bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 + bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE help Find out whether you have a PCI motherboard. PCI is the name of a bus system, i.e. the way the CPU talks to the other stuff inside @@ -558,6 +558,12 @@ config PCI_HOST_VIA82C505 depends on PCI && ARCH_SHARK default y +config PCI_HOST_ITE8152 + bool + depends on PCI && MACH_ARMCORE + default y + select DMABOUNCE + source "drivers/pci/Kconfig" source "drivers/pcmcia/Kconfig" diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index c03de9bfd76b..97b7dc13d9aa 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -70,8 +70,6 @@ static inline void it8152_irq(int irq) { struct irq_desc *desc; - printk(KERN_DEBUG "===> %s: irq=%d\n", __FUNCTION__, irq); - desc = irq_desc + irq; desc_handle_irq(irq, desc); } @@ -106,8 +104,6 @@ void it8152_irq_demux(unsigned int irq, struct irq_desc *desc) int bits_pd, bits_lp, bits_ld; int i; - printk(KERN_DEBUG "=> %s: irq = %d\n", __FUNCTION__, irq); - while (1) { /* Read all */ bits_pd = __raw_readl(IT8152_INTC_PDCNIRR); @@ -293,8 +289,7 @@ int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) */ int pci_set_dma_mask(struct pci_dev *dev, u64 mask) { - printk(KERN_DEBUG "%s: %s %llx\n", - __FUNCTION__, dev->dev.bus_id, mask); + dev_dbg(&dev->dev, "%s: %llx\n", __FUNCTION__, mask); if (mask >= PHYS_OFFSET + SZ_64M - 1) return 0; @@ -304,8 +299,7 @@ int pci_set_dma_mask(struct pci_dev *dev, u64 mask) int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask) { - printk(KERN_DEBUG "%s: %s %llx\n", - __FUNCTION__, dev->dev.bus_id, mask); + dev_dbg(&dev->dev, "%s: %llx\n", __FUNCTION__, mask); if (mask >= PHYS_OFFSET + SZ_64M - 1) return 0; diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c index 878d3b9b8633..15c4e0df3e10 100644 --- a/arch/arm/mach-pxa/cm-x270-pci.c +++ b/arch/arm/mach-pxa/cm-x270-pci.c @@ -40,7 +40,7 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size, { unsigned int sz = SZ_64M >> PAGE_SHIFT; - printk(KERN_INFO "Adjusting zones for CM-x270\n"); + pr_info("Adjusting zones for CM-x270\n"); /* * Only adjust if > 64M on current system @@ -104,8 +104,7 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { int irq; - printk(KERN_DEBUG "===> %s: %s slot=%x, pin=%x\n", __FUNCTION__, - pci_name(dev), slot, pin); + dev_dbg(&dev->dev, "%s: slot=%x, pin=%x\n", __FUNCTION__, slot, pin); irq = it8152_pci_map_irq(dev, slot, pin); if (irq) @@ -141,14 +140,13 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) return(0); } -static struct pci_bus * __init -cmx270_pci_scan_bus(int nr, struct pci_sys_data *sys) +static void cmx270_pci_preinit(void) { - printk(KERN_INFO "Initializing CM-X270 PCI subsystem\n"); + pr_info("Initializing CM-X270 PCI subsystem\n"); __raw_writel(0x800, IT8152_PCI_CFG_ADDR); if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) { - printk(KERN_INFO "PCI Bridge found.\n"); + pr_info("PCI Bridge found.\n"); /* set PCI I/O base at 0 */ writel(0x848, IT8152_PCI_CFG_ADDR); @@ -163,7 +161,7 @@ cmx270_pci_scan_bus(int nr, struct pci_sys_data *sys) /* CardBus Controller on ATXbase baseboard */ writel(0x4000, IT8152_PCI_CFG_ADDR); if (readl(IT8152_PCI_CFG_DATA) == 0xAC51104C) { - printk(KERN_INFO "CardBus Bridge found.\n"); + pr_info("CardBus Bridge found.\n"); /* Configure socket 0 */ writel(0x408C, IT8152_PCI_CFG_ADDR); @@ -196,7 +194,6 @@ cmx270_pci_scan_bus(int nr, struct pci_sys_data *sys) writel(0xb0000000, IT8152_PCI_CFG_DATA); } } - return it8152_pci_scan_bus(nr, sys); } static struct hw_pci cmx270_pci __initdata = { @@ -204,7 +201,8 @@ static struct hw_pci cmx270_pci __initdata = { .map_irq = cmx270_pci_map_irq, .nr_controllers = 1, .setup = it8152_pci_setup, - .scan = cmx270_pci_scan_bus, + .scan = it8152_pci_scan_bus, + .preinit = cmx270_pci_preinit, }; static int __init cmx270_init_pci(void) -- cgit v1.2.3-59-g8ed1b From 03d14a5536cf5611d27a106137a814c8f1135ddd Mon Sep 17 00:00:00 2001 From: Michael Brunner Date: Tue, 4 Dec 2007 21:39:20 +0100 Subject: [ARM] 4690/1: PXA: fix CKEN corruption in PXA27x AC97 cold reset code Fix CKEN register corruption in the PXA27x cold reset code located in sound/arm/pxa27x-ac97.c. The problem has been introduced with a pxa_set_cken() function change in linux 2.6.23. This patch is based on patch 4527/1 that fixes the same problem in the ASoC PXA-AC97 driver. Additionally a definition for the CKEN index value is added and applied to both PXA AC97 drivers. Signed-off-by: Michael Brunner Signed-off-by: Russell King --- include/asm-arm/arch-pxa/pxa-regs.h | 1 + sound/arm/pxa2xx-ac97.c | 4 ++-- sound/soc/pxa/pxa2xx-ac97.c | 4 ++-- 3 files changed, 5 insertions(+), 4 deletions(-) diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 6b33df6f1995..1bd398da07da 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -1784,6 +1784,7 @@ #define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ #define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */ +#define CKEN_AC97CONF (31) /* AC97 Controller Configuration */ #define CKEN_CAMERA (24) /* Camera Interface Clock Enable */ #define CKEN_SSP1 (23) /* SSP1 Unit Clock Enable */ #define CKEN_MEMC (22) /* Memory Controller Clock Enable */ diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c index 7bc2767e1584..55c6c822bec1 100644 --- a/sound/arm/pxa2xx-ac97.c +++ b/sound/arm/pxa2xx-ac97.c @@ -113,9 +113,9 @@ static void pxa2xx_ac97_reset(struct snd_ac97 *ac97) gsr_bits = 0; #ifdef CONFIG_PXA27x /* PXA27x Developers Manual section 13.5.2.2.1 */ - pxa_set_cken(1 << 31, 1); + pxa_set_cken(CKEN_AC97CONF, 1); udelay(5); - pxa_set_cken(1 << 31, 0); + pxa_set_cken(CKEN_AC97CONF, 0); GCR = GCR_COLD_RST; udelay(50); #else diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c index dd14abcdf1bd..60e6f4677f93 100644 --- a/sound/soc/pxa/pxa2xx-ac97.c +++ b/sound/soc/pxa/pxa2xx-ac97.c @@ -160,9 +160,9 @@ static void pxa2xx_ac97_cold_reset(struct snd_ac97 *ac97) gsr_bits = 0; #ifdef CONFIG_PXA27x /* PXA27x Developers Manual section 13.5.2.2.1 */ - pxa_set_cken(31, 1); + pxa_set_cken(CKEN_AC97CONF, 1); udelay(5); - pxa_set_cken(31, 0); + pxa_set_cken(CKEN_AC97CONF, 0); GCR = GCR_COLD_RST; udelay(50); #else -- cgit v1.2.3-59-g8ed1b From 6d2d419ffd83502d105014288e6af171a0a89544 Mon Sep 17 00:00:00 2001 From: Chris Dearman Date: Thu, 6 Dec 2007 15:35:54 +0000 Subject: [MIPS] Don't byteswap writes to display when running bigendian Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle --- arch/mips/mips-boards/generic/display.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/mips-boards/generic/display.c b/arch/mips/mips-boards/generic/display.c index 5d600054090a..2a0057cfc30d 100644 --- a/arch/mips/mips-boards/generic/display.c +++ b/arch/mips/mips-boards/generic/display.c @@ -37,9 +37,9 @@ void mips_display_message(const char *str) for (i = 0; i <= 14; i=i+2) { if (*str) - writel(*str++, display + i); + __raw_writel(*str++, display + i); else - writel(' ', display + i); + __raw_writel(' ', display + i); } } -- cgit v1.2.3-59-g8ed1b From 0f5e49a2e2de69ee05ad8783274b0672247fd18f Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Thu, 6 Dec 2007 08:11:56 +0100 Subject: [MIPS] Alchemy: Fix Au1x SD controller IRQ With the introduction of MIPS_CPU_IRQ_BASE, the hardcoded IRQ number of the au1100/au1200 SD controller(s) is no longer valid. Signed-off-by: Manuel Lauss Signed-off-by: Ralf Baechle --- include/asm-mips/mach-au1x00/au1100_mmc.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/include/asm-mips/mach-au1x00/au1100_mmc.h b/include/asm-mips/mach-au1x00/au1100_mmc.h index 9e7d1ba21b55..9e0028f60a43 100644 --- a/include/asm-mips/mach-au1x00/au1100_mmc.h +++ b/include/asm-mips/mach-au1x00/au1100_mmc.h @@ -41,8 +41,11 @@ #define NUM_AU1100_MMC_CONTROLLERS 2 - -#define AU1100_SD_IRQ 2 +#if defined(CONFIG_SOC_AU1100) +#define AU1100_SD_IRQ AU1100_SD_INT +#elif defined(CONFIG_SOC_AU1200) +#define AU1100_SD_IRQ AU1200_SD_INT +#endif #define SD0_BASE 0xB0600000 -- cgit v1.2.3-59-g8ed1b From 8f7e7d67cbcbcfd2c72d496f01f5e4c78853ef7d Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Fri, 23 Nov 2007 00:44:06 +0900 Subject: qemu: do not enable IP7 blindly IP7 will be enabled automatically in mips_clockevent_init(), if available. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/qemu/q-irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/qemu/q-irq.c b/arch/mips/qemu/q-irq.c index 11f984767880..7df36dbe65c7 100644 --- a/arch/mips/qemu/q-irq.c +++ b/arch/mips/qemu/q-irq.c @@ -33,5 +33,5 @@ void __init arch_init_irq(void) mips_cpu_irq_init(); init_i8259_irqs(); - set_c0_status(0x8400); + set_c0_status(0x400); } -- cgit v1.2.3-59-g8ed1b From 5ef1b9a0f6cbb1269fc8b8d7704d146f22bf7aa6 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 16 Nov 2007 23:15:51 +0000 Subject: [MIPS] Bigsur: Enable tickless and and highres timers. Signed-off-by: Ralf Baechle --- arch/mips/configs/bigsur_defconfig | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index 80b0c99c2cfb..3c70c9d16d01 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -76,9 +76,13 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +CONFIG_CEVT_BCM1480=y +CONFIG_CSRC_BCM1480=y CONFIG_DMA_COHERENT=y CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set @@ -91,6 +95,11 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_CPU_LOONGSON2 is not set # CONFIG_CPU_MIPS32_R1 is not set # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set -- cgit v1.2.3-59-g8ed1b From ba0f00b9fcb02b10cc9929fec660f86d1af6a41a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 16 Nov 2007 14:54:46 +0000 Subject: [MIPS] Malta: Enable tickless and highres timers. Most Malta use an FPGA CPU card which rarely is good for more than 40MHz. So the performance penalta of the regular timer interrupt, especially for the VSMP kernel model is significant, even at a mere 100Hz. Signed-off-by: Ralf Baechle --- arch/mips/configs/malta_defconfig | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index fbd2d802fdfd..4b7e43c9f69a 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -49,10 +49,13 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_CEVT_R4K=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_EARLY_PRINTK=y @@ -76,6 +79,10 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_CPU_LOONGSON2 is not set # CONFIG_CPU_MIPS32_R1 is not set CONFIG_CPU_MIPS32_R2=y @@ -253,6 +260,7 @@ CONFIG_HW_HAS_PCI=y CONFIG_PCI=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_MMU=y +CONFIG_I8253=y # # PCCARD (PCMCIA/CardBus) support -- cgit v1.2.3-59-g8ed1b From a186b4a6b22fdc96a1ed63da483d267b5d00839e Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Mon, 3 Dec 2007 13:43:12 -0500 Subject: firewire: OHCI 1.0 Isochronous Receive support Third rendition of FireWire OHCI 1.0 Isochronous Receive support, using a zer-copy method similar to OHCI 1.1 which puts the IR data payload directly into the userspace buffer. The zero-copy implementation eliminates the video artifacts, audio popping, and buffer underrun problems seen with version 1 of this patch, as well as fixing a regression in OHCI 1.1 support introduced by version 2 of this patch. Successfully tested in OHCI 1.1 mode on the following chipsets: - NEC uPD72847 (rev 01), OHCI 1.1 (PCI) - Ti XIO2200(A) (rev 01), OHCI 1.1 (PCIe) - Ti TSB41AB2 (rev 01), OHCI 1.1 (PCI on SB Audigy) - Apple UniNorth 2 (rev 81), OHCI 1.1 (PowerBook G4 onboard) Successfully tested in OHCI 1.0 mode on the following chipsets: - Agere FW323 (rev 06), OHCI 1.0 (Mac Mini onboard) - Agere FW323 (rev 06), OHCI 1.0 (PCI) - Via VT6306 (rev 46), OHCI 1.0 (PCI) - NEC OrangeLink (rev 01), OHCI 1.0 (PCI) - NEC uPD72847 (rev 01), OHCI 1.1 (PCI) - Ti XIO2200(A) (rev 01), OHCI 1.1 (PCIe) The bulk of testing was done in an x86_64 system, but was also successfully sanity-tested on other systems, including a PPC(32) PowerBook G4 and an i686 EPIA M10k. Crude benchmarking (watching top during capture) puts the cpu utilization during capture on the EPIA's 1GHz Via C3 processor around 13%, which is down from 30% with the v1 code. Some implementation details: To maintain the same userspace API as dual-buffer mode, we set up two descriptors for every incoming packet. The first is an INPUT_MORE descriptor, pointing to a buffer large enough to hold just the packet's iso headers, immediately followed by an INPUT_LAST descriptor, pointing to a chunk of the userspace buffer big enough for the packet's data payload. With this setup, each incoming packet fills in these two descriptors in a manner that very closely emulates dual-buffer receive, to the point where the bulk of the handle_ir_* code is now identical between the two (and probably primed for some restructuring to share code between them). The only caveat I have at the moment is that neither of my OHCI 1.0 Via VT6307-based FireWire controllers work particularly well with this code for reasons I have yet to figure out. Signed-off-by: Jarod Wilson Signed-off-by: Stefan Richter --- drivers/firewire/fw-ohci.c | 175 +++++++++++++++++++++++++++++++++++++++------ 1 file changed, 155 insertions(+), 20 deletions(-) diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index c9b9081831da..436a855a4c60 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -437,6 +437,21 @@ static void ar_context_run(struct ar_context *ctx) flush_writes(ctx->ohci); } +static struct descriptor * +find_branch_descriptor(struct descriptor *d, int z) +{ + int b, key; + + b = (le16_to_cpu(d->control) & DESCRIPTOR_BRANCH_ALWAYS) >> 2; + key = (le16_to_cpu(d->control) & DESCRIPTOR_KEY_IMMEDIATE) >> 8; + + /* figure out which descriptor the branch address goes in */ + if (z == 2 && (b == 3 || key == 2)) + return d; + else + return d + z - 1; +} + static void context_tasklet(unsigned long data) { struct context *ctx = (struct context *) data; @@ -455,7 +470,7 @@ static void context_tasklet(unsigned long data) address = le32_to_cpu(last->branch_address); z = address & 0xf; d = ctx->buffer + (address - ctx->buffer_bus) / sizeof(*d); - last = (z == 2) ? d : d + z - 1; + last = find_branch_descriptor(d, z); if (!ctx->callback(ctx, d, last)) break; @@ -566,7 +581,7 @@ static void context_append(struct context *ctx, ctx->head_descriptor = d + z + extra; ctx->prev_descriptor->branch_address = cpu_to_le32(d_bus | z); - ctx->prev_descriptor = z == 2 ? d : d + z - 1; + ctx->prev_descriptor = find_branch_descriptor(d, z); dma_sync_single_for_device(ctx->ohci->card.device, ctx->buffer_bus, ctx->buffer_size, DMA_TO_DEVICE); @@ -655,7 +670,7 @@ at_context_queue_packet(struct context *ctx, struct fw_packet *packet) driver_data = (struct driver_data *) &d[3]; driver_data->packet = packet; packet->driver_data = driver_data; - + if (packet->payload_length > 0) { payload_bus = dma_map_single(ohci->card.device, packet->payload, @@ -903,7 +918,7 @@ at_context_transmit(struct context *ctx, struct fw_packet *packet) if (retval < 0) packet->callback(packet, &ctx->ohci->card, packet->ack); - + } static void bus_reset_tasklet(unsigned long data) @@ -1431,6 +1446,57 @@ static int handle_ir_dualbuffer_packet(struct context *context, return 1; } +static int handle_ir_packet_per_buffer(struct context *context, + struct descriptor *d, + struct descriptor *last) +{ + struct iso_context *ctx = + container_of(context, struct iso_context, context); + struct descriptor *pd = d + 1; + __le32 *ir_header; + size_t header_length; + void *p, *end; + int i, z; + + if (pd->res_count == pd->req_count) + /* Descriptor(s) not done yet, stop iteration */ + return 0; + + header_length = le16_to_cpu(d->req_count); + + i = ctx->header_length; + z = le32_to_cpu(pd->branch_address) & 0xf; + p = d + z; + end = p + header_length; + + while (p < end && i + ctx->base.header_size <= PAGE_SIZE) { + /* + * The iso header is byteswapped to little endian by + * the controller, but the remaining header quadlets + * are big endian. We want to present all the headers + * as big endian, so we have to swap the first quadlet. + */ + *(u32 *) (ctx->header + i) = __swab32(*(u32 *) (p + 4)); + memcpy(ctx->header + i + 4, p + 8, ctx->base.header_size - 4); + i += ctx->base.header_size; + p += ctx->base.header_size + 4; + } + + ctx->header_length = i; + + if (le16_to_cpu(pd->control) & DESCRIPTOR_IRQ_ALWAYS) { + ir_header = (__le32 *) (d + z); + ctx->base.callback(&ctx->base, + le32_to_cpu(ir_header[0]) & 0xffff, + ctx->header_length, ctx->header, + ctx->base.callback_data); + ctx->header_length = 0; + } + + + return 1; +} + static int handle_it_packet(struct context *context, struct descriptor *d, struct descriptor *last) @@ -1466,14 +1532,12 @@ ohci_allocate_iso_context(struct fw_card *card, int type, size_t header_size) } else { mask = &ohci->ir_context_mask; list = ohci->ir_context_list; - callback = handle_ir_dualbuffer_packet; + if (ohci->version >= OHCI_VERSION_1_1) + callback = handle_ir_dualbuffer_packet; + else + callback = handle_ir_packet_per_buffer; } - /* FIXME: We need a fallback for pre 1.1 OHCI. */ - if (callback == handle_ir_dualbuffer_packet && - ohci->version < OHCI_VERSION_1_1) - return ERR_PTR(-ENOSYS); - spin_lock_irqsave(&ohci->lock, flags); index = ffs(*mask) - 1; if (index >= 0) @@ -1532,7 +1596,9 @@ static int ohci_start_iso(struct fw_iso_context *base, context_run(&ctx->context, match); } else { index = ctx - ohci->ir_context_list; - control = IR_CONTEXT_DUAL_BUFFER_MODE | IR_CONTEXT_ISOCH_HEADER; + control = IR_CONTEXT_ISOCH_HEADER; + if (ohci->version >= OHCI_VERSION_1_1) + control |= IR_CONTEXT_DUAL_BUFFER_MODE; match = (tags << 28) | (sync << 8) | ctx->base.channel; if (cycle >= 0) { match |= (cycle & 0x07fff) << 12; @@ -1738,7 +1804,6 @@ ohci_queue_iso_receive_dualbuffer(struct fw_iso_context *base, offset = payload & ~PAGE_MASK; rest = p->payload_length; - /* FIXME: OHCI 1.0 doesn't support dual buffer receive */ /* FIXME: make packet-per-buffer/dual-buffer a context option */ while (rest > 0) { d = context_get_descriptors(&ctx->context, @@ -1776,6 +1841,81 @@ ohci_queue_iso_receive_dualbuffer(struct fw_iso_context *base, return 0; } +static int +ohci_queue_iso_receive_packet_per_buffer(struct fw_iso_context *base, + struct fw_iso_packet *packet, + struct fw_iso_buffer *buffer, + unsigned long payload) +{ + struct iso_context *ctx = container_of(base, struct iso_context, base); + struct descriptor *d = NULL, *pd = NULL; + struct fw_iso_packet *p; + dma_addr_t d_bus, page_bus; + u32 z, header_z, rest; + int i, page, offset, packet_count, header_size; + + if (packet->skip) { + d = context_get_descriptors(&ctx->context, 1, &d_bus); + if (d == NULL) + return -ENOMEM; + + d->control = cpu_to_le16(DESCRIPTOR_STATUS | + DESCRIPTOR_INPUT_LAST | + DESCRIPTOR_BRANCH_ALWAYS | + DESCRIPTOR_WAIT); + context_append(&ctx->context, d, 1, 0); + } + + /* one descriptor for header, one for payload */ + /* FIXME: handle cases where we need multiple desc. for payload */ + z = 2; + p = packet; + + /* + * The OHCI controller puts the status word in the + * buffer too, so we need 4 extra bytes per packet. + */ + packet_count = p->header_length / ctx->base.header_size; + header_size = packet_count * (ctx->base.header_size + 4); + + /* Get header size in number of descriptors. */ + header_z = DIV_ROUND_UP(header_size, sizeof(*d)); + page = payload >> PAGE_SHIFT; + offset = payload & ~PAGE_MASK; + rest = p->payload_length; + + for (i = 0; i < packet_count; i++) { + /* d points to the header descriptor */ + d = context_get_descriptors(&ctx->context, + z + header_z, &d_bus); + if (d == NULL) + return -ENOMEM; + + d->control = cpu_to_le16(DESCRIPTOR_INPUT_MORE); + d->req_count = cpu_to_le16(header_size); + d->res_count = d->req_count; + d->data_address = cpu_to_le32(d_bus + (z * sizeof(*d))); + + /* pd points to the payload descriptor */ + pd = d + 1; + pd->control = cpu_to_le16(DESCRIPTOR_STATUS | + DESCRIPTOR_INPUT_LAST | + DESCRIPTOR_BRANCH_ALWAYS); + if (p->interrupt) + pd->control |= cpu_to_le16(DESCRIPTOR_IRQ_ALWAYS); + + pd->req_count = cpu_to_le16(rest); + pd->res_count = pd->req_count; + + page_bus = page_private(buffer->pages[page]); + pd->data_address = cpu_to_le32(page_bus + offset); + + context_append(&ctx->context, d, z, header_z); + } + + return 0; +} + static int ohci_queue_iso(struct fw_iso_context *base, struct fw_iso_packet *packet, @@ -1790,8 +1930,9 @@ ohci_queue_iso(struct fw_iso_context *base, return ohci_queue_iso_receive_dualbuffer(base, packet, buffer, payload); else - /* FIXME: Implement fallback for OHCI 1.0 controllers. */ - return -ENOSYS; + return ohci_queue_iso_receive_packet_per_buffer(base, packet, + buffer, + payload); } static const struct fw_card_driver ohci_driver = { @@ -1911,12 +2052,6 @@ pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) ohci->version = reg_read(ohci, OHCI1394_Version) & 0x00ff00ff; fw_notify("Added fw-ohci device %s, OHCI version %x.%x\n", dev->dev.bus_id, ohci->version >> 16, ohci->version & 0xff); - if (ohci->version < OHCI_VERSION_1_1) { - fw_notify(" Isochronous I/O is not yet implemented for " - "OHCI 1.0 chips.\n"); - fw_notify(" Cameras, audio devices etc. won't work on " - "this controller with this driver version.\n"); - } return 0; fail_self_id: -- cgit v1.2.3-59-g8ed1b From 43cbe2cbdd5320f1ac785c6f016923609831effe Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 10 Dec 2007 15:49:13 -0800 Subject: aoe: properly initialise the request_queue's backing_dev_info AOE forgot to initialise its queue's backing_dev_info, so kernels crash. (http://bugzilla.kernel.org/show_bug.cgi?id=9482) Fix that and consoldate aoeblk_gdalloc()'s error handling. Thanks be to Jon for reporting and testing. Cc: "Ed L. Cashin" Cc: Cc: "Jon Nelson" Acked-by: Peter Zijlstra Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/aoe/aoeblk.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) diff --git a/drivers/block/aoe/aoeblk.c b/drivers/block/aoe/aoeblk.c index b1d00ef6659c..ad00b3d94711 100644 --- a/drivers/block/aoe/aoeblk.c +++ b/drivers/block/aoe/aoeblk.c @@ -6,6 +6,7 @@ #include #include +#include #include #include #include @@ -210,25 +211,20 @@ aoeblk_gdalloc(void *vp) if (gd == NULL) { printk(KERN_ERR "aoe: cannot allocate disk structure for %ld.%ld\n", d->aoemajor, d->aoeminor); - spin_lock_irqsave(&d->lock, flags); - d->flags &= ~DEVFL_GDALLOC; - spin_unlock_irqrestore(&d->lock, flags); - return; + goto err; } d->bufpool = mempool_create_slab_pool(MIN_BUFS, buf_pool_cache); if (d->bufpool == NULL) { printk(KERN_ERR "aoe: cannot allocate bufpool for %ld.%ld\n", d->aoemajor, d->aoeminor); - put_disk(gd); - spin_lock_irqsave(&d->lock, flags); - d->flags &= ~DEVFL_GDALLOC; - spin_unlock_irqrestore(&d->lock, flags); - return; + goto err_disk; } - spin_lock_irqsave(&d->lock, flags); blk_queue_make_request(&d->blkq, aoeblk_make_request); + if (bdi_init(&d->blkq.backing_dev_info)) + goto err_mempool; + spin_lock_irqsave(&d->lock, flags); gd->major = AOE_MAJOR; gd->first_minor = d->sysminor * AOE_PARTITIONS; gd->fops = &aoe_bdops; @@ -246,6 +242,16 @@ aoeblk_gdalloc(void *vp) add_disk(gd); aoedisk_add_sysfs(d); + return; + +err_mempool: + mempool_destroy(d->bufpool); +err_disk: + put_disk(gd); +err: + spin_lock_irqsave(&d->lock, flags); + d->flags &= ~DEVFL_GDALLOC; + spin_unlock_irqrestore(&d->lock, flags); } void -- cgit v1.2.3-59-g8ed1b From 24601bbcacb3356657747f2e64317923feb7a1a2 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 10 Dec 2007 15:49:20 -0800 Subject: revert "dpt_i2o: convert to SCSI hotplug model" revert commit 55d9fcf57ba5ec427544fca7abc335cf3da78160 Author: Matthew Wilcox Date: Mon Jul 30 15:19:18 2007 -0600 [SCSI] dpt_i2o: convert to SCSI hotplug model - Delete refereces to HOSTS_C - Switch to module_init/module_exit instead of detect/release - Don't pass around the host template and rename it to adpt_template - Switch from scsi_register/scsi_unregister to scsi_host_alloc, scsi_add_host, scsi_scan_host and scsi_host_put. Because it caused (for unknown reasons) Andres' all-data-reads-as-zeroes problem, reported at http://groups.google.com/group/fa.linux.kernel/msg/083a9acff0330234 Cc: Matthew Wilcox Cc: "Salyzyn, Mark" Cc: James Bottomley Acked-by: FUJITA Tomonori Cc: Anders Henke Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/scsi/dpt_i2o.c | 132 +++++++++++++++++++++++-------------------------- drivers/scsi/dpti.h | 9 +++- 2 files changed, 68 insertions(+), 73 deletions(-) diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c index 8258506ba7d7..70f48a1a6d58 100644 --- a/drivers/scsi/dpt_i2o.c +++ b/drivers/scsi/dpt_i2o.c @@ -173,20 +173,20 @@ static struct pci_device_id dptids[] = { }; MODULE_DEVICE_TABLE(pci,dptids); -static void adpt_exit(void); - -static int adpt_detect(void) +static int adpt_detect(struct scsi_host_template* sht) { struct pci_dev *pDev = NULL; adpt_hba* pHba; + adpt_init(); + PINFO("Detecting Adaptec I2O RAID controllers...\n"); /* search for all Adatpec I2O RAID cards */ while ((pDev = pci_get_device( PCI_DPT_VENDOR_ID, PCI_ANY_ID, pDev))) { if(pDev->device == PCI_DPT_DEVICE_ID || pDev->device == PCI_DPT_RAPTOR_DEVICE_ID){ - if(adpt_install_hba(pDev) ){ + if(adpt_install_hba(sht, pDev) ){ PERROR("Could not Init an I2O RAID device\n"); PERROR("Will not try to detect others.\n"); return hba_count-1; @@ -248,33 +248,34 @@ rebuild_sys_tab: } for (pHba = hba_chain; pHba; pHba = pHba->next) { - if (adpt_scsi_register(pHba) < 0) { + if( adpt_scsi_register(pHba,sht) < 0){ adpt_i2o_delete_hba(pHba); continue; } pHba->initialized = TRUE; pHba->state &= ~DPTI_STATE_RESET; - scsi_scan_host(pHba->host); } // Register our control device node // nodes will need to be created in /dev to access this // the nodes can not be created from within the driver if (hba_count && register_chrdev(DPTI_I2O_MAJOR, DPT_DRIVER, &adpt_fops)) { - adpt_exit(); + adpt_i2o_sys_shutdown(); return 0; } return hba_count; } -static int adpt_release(adpt_hba *pHba) +/* + * scsi_unregister will be called AFTER we return. + */ +static int adpt_release(struct Scsi_Host *host) { - struct Scsi_Host *shost = pHba->host; - scsi_remove_host(shost); + adpt_hba* pHba = (adpt_hba*) host->hostdata[0]; // adpt_i2o_quiesce_hba(pHba); adpt_i2o_delete_hba(pHba); - scsi_host_put(shost); + scsi_unregister(host); return 0; } @@ -881,7 +882,7 @@ static int adpt_reboot_event(struct notifier_block *n, ulong code, void *p) #endif -static int adpt_install_hba(struct pci_dev* pDev) +static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev) { adpt_hba* pHba = NULL; @@ -1028,6 +1029,8 @@ static void adpt_i2o_delete_hba(adpt_hba* pHba) mutex_lock(&adpt_configuration_lock); + // scsi_unregister calls our adpt_release which + // does a quiese if(pHba->host){ free_irq(pHba->host->irq, pHba); } @@ -1079,6 +1082,17 @@ static void adpt_i2o_delete_hba(adpt_hba* pHba) } +static int adpt_init(void) +{ + printk("Loading Adaptec I2O RAID: Version " DPT_I2O_VERSION "\n"); +#ifdef REBOOT_NOTIFIER + register_reboot_notifier(&adpt_reboot_notifier); +#endif + + return 0; +} + + static struct adpt_device* adpt_find_device(adpt_hba* pHba, u32 chan, u32 id, u32 lun) { struct adpt_device* d; @@ -2164,6 +2178,37 @@ static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_d } +static s32 adpt_scsi_register(adpt_hba* pHba,struct scsi_host_template * sht) +{ + struct Scsi_Host *host = NULL; + + host = scsi_register(sht, sizeof(adpt_hba*)); + if (host == NULL) { + printk ("%s: scsi_register returned NULL\n",pHba->name); + return -1; + } + host->hostdata[0] = (unsigned long)pHba; + pHba->host = host; + + host->irq = pHba->pDev->irq; + /* no IO ports, so don't have to set host->io_port and + * host->n_io_port + */ + host->io_port = 0; + host->n_io_port = 0; + /* see comments in scsi_host.h */ + host->max_id = 16; + host->max_lun = 256; + host->max_channel = pHba->top_scsi_channel + 1; + host->cmd_per_lun = 1; + host->unique_id = (uint) pHba; + host->sg_tablesize = pHba->sg_tablesize; + host->can_queue = pHba->post_fifo_size; + + return 0; +} + + static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd) { adpt_hba* pHba; @@ -3279,10 +3324,12 @@ static static void adpt_delay(int millisec) #endif -static struct scsi_host_template adpt_template = { +static struct scsi_host_template driver_template = { .name = "dpt_i2o", .proc_name = "dpt_i2o", .proc_info = adpt_proc_info, + .detect = adpt_detect, + .release = adpt_release, .info = adpt_info, .queuecommand = adpt_queue, .eh_abort_handler = adpt_abort, @@ -3297,62 +3344,5 @@ static struct scsi_host_template adpt_template = { .use_clustering = ENABLE_CLUSTERING, .use_sg_chaining = ENABLE_SG_CHAINING, }; - -static s32 adpt_scsi_register(adpt_hba* pHba) -{ - struct Scsi_Host *host; - - host = scsi_host_alloc(&adpt_template, sizeof(adpt_hba*)); - if (host == NULL) { - printk ("%s: scsi_host_alloc returned NULL\n",pHba->name); - return -1; - } - host->hostdata[0] = (unsigned long)pHba; - pHba->host = host; - - host->irq = pHba->pDev->irq; - /* no IO ports, so don't have to set host->io_port and - * host->n_io_port - */ - host->io_port = 0; - host->n_io_port = 0; - /* see comments in scsi_host.h */ - host->max_id = 16; - host->max_lun = 256; - host->max_channel = pHba->top_scsi_channel + 1; - host->cmd_per_lun = 1; - host->unique_id = (uint) pHba; - host->sg_tablesize = pHba->sg_tablesize; - host->can_queue = pHba->post_fifo_size; - - if (scsi_add_host(host, &pHba->pDev->dev)) { - scsi_host_put(host); - return -1; - } - - return 0; -} - -static int __init adpt_init(void) -{ - int count; - - printk("Loading Adaptec I2O RAID: Version " DPT_I2O_VERSION "\n"); -#ifdef REBOOT_NOTIFIER - register_reboot_notifier(&adpt_reboot_notifier); -#endif - - count = adpt_detect(); - - return count > 0 ? 0 : -ENODEV; -} - -static void adpt_exit(void) -{ - while (hba_chain) - adpt_release(hba_chain); -} - -module_init(adpt_init); -module_exit(adpt_exit); +#include "scsi_module.c" MODULE_LICENSE("GPL"); diff --git a/drivers/scsi/dpti.h b/drivers/scsi/dpti.h index 0892f6c70319..fd79068c5869 100644 --- a/drivers/scsi/dpti.h +++ b/drivers/scsi/dpti.h @@ -28,9 +28,11 @@ * SCSI interface function Prototypes */ +static int adpt_detect(struct scsi_host_template * sht); static int adpt_queue(struct scsi_cmnd * cmd, void (*cmdcomplete) (struct scsi_cmnd *)); static int adpt_abort(struct scsi_cmnd * cmd); static int adpt_reset(struct scsi_cmnd* cmd); +static int adpt_release(struct Scsi_Host *host); static int adpt_slave_configure(struct scsi_device *); static const char *adpt_info(struct Scsi_Host *pSHost); @@ -47,6 +49,8 @@ static int adpt_device_reset(struct scsi_cmnd* cmd); #define DPT_DRIVER_NAME "Adaptec I2O RAID" +#ifndef HOSTS_C + #include "dpt/sys_info.h" #include #include "dpt/dpti_i2o.h" @@ -285,7 +289,7 @@ static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba); static s32 adpt_i2o_hrt_get(adpt_hba* pHba); static s32 adpt_scsi_to_i2o(adpt_hba* pHba, struct scsi_cmnd* cmd, struct adpt_device* dptdevice); static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd); -static s32 adpt_scsi_register(adpt_hba* pHba); +static s32 adpt_scsi_register(adpt_hba* pHba,struct scsi_host_template * sht); static s32 adpt_hba_reset(adpt_hba* pHba); static s32 adpt_i2o_reset_hba(adpt_hba* pHba); static s32 adpt_rescan(adpt_hba* pHba); @@ -295,7 +299,7 @@ static void adpt_i2o_delete_hba(adpt_hba* pHba); static void adpt_inquiry(adpt_hba* pHba); static void adpt_fail_posted_scbs(adpt_hba* pHba); static struct adpt_device* adpt_find_device(adpt_hba* pHba, u32 chan, u32 id, u32 lun); -static int adpt_install_hba(struct pci_dev* pDev) ; +static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev) ; static int adpt_i2o_online_hba(adpt_hba* pHba); static void adpt_i2o_post_wait_complete(u32, int); static int adpt_i2o_systab_send(adpt_hba* pHba); @@ -339,4 +343,5 @@ static void adpt_i386_info(sysInfo_S* si); #define FW_DEBUG_BLED_OFFSET 8 #define FW_DEBUG_FLAGS_NO_HEADERS_B 0x01 +#endif /* !HOSTS_C */ #endif /* _DPT_H */ -- cgit v1.2.3-59-g8ed1b From 78187865efa5aec5a28a200a39153f98d8f38d4d Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 10 Dec 2007 15:49:22 -0800 Subject: pcmcia: fix kernel-doc comments Fix kernel-doc comments in drivers/pcmcia/: - ti113x.h does not contain kernel-doc, so don't use /** to begin a doc comment - yenta_socket.c: remove /** on non-kernel-doc comments; escape the ':' in an "http:" comment so that it won't be treated as a section heading; - cs.c: remove /** on non-kernel-doc comments & add function parameter info - ds.c: fix function parameter info Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pcmcia/cs.c | 8 +++++--- drivers/pcmcia/ds.c | 6 ++++-- drivers/pcmcia/ti113x.h | 2 +- drivers/pcmcia/yenta_socket.c | 6 +++--- 4 files changed, 13 insertions(+), 9 deletions(-) diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c index a0aca46ce877..56230dbd347a 100644 --- a/drivers/pcmcia/cs.c +++ b/drivers/pcmcia/cs.c @@ -89,7 +89,7 @@ DECLARE_RWSEM(pcmcia_socket_list_rwsem); EXPORT_SYMBOL(pcmcia_socket_list_rwsem); -/** +/* * Low-level PCMCIA socket drivers need to register with the PCCard * core using pcmcia_register_socket. * @@ -174,6 +174,7 @@ static int pccardd(void *__skt); /** * pcmcia_register_socket - add a new pcmcia socket device + * @socket: the &socket to register */ int pcmcia_register_socket(struct pcmcia_socket *socket) { @@ -268,6 +269,7 @@ EXPORT_SYMBOL(pcmcia_register_socket); /** * pcmcia_unregister_socket - remove a pcmcia socket device + * @socket: the &socket to unregister */ void pcmcia_unregister_socket(struct pcmcia_socket *socket) { @@ -311,7 +313,7 @@ struct pcmcia_socket * pcmcia_get_socket_by_nr(unsigned int nr) } EXPORT_SYMBOL(pcmcia_get_socket_by_nr); -/** +/* * The central event handler. Send_event() sends an event to the * 16-bit subsystem, which then calls the relevant device drivers. * Parse_events() interprets the event bits from @@ -380,7 +382,7 @@ static int socket_reset(struct pcmcia_socket *skt) return CS_GENERAL_FAILURE; } -/** +/* * socket_setup() and socket_shutdown() are called by the main event handler * when card insertion and removal events are received. * socket_setup() turns on socket power and resets the socket, in two stages. diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 7bf78c127898..5cf89a91da1e 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -320,6 +320,7 @@ pcmcia_create_newid_file(struct pcmcia_driver *drv) /** * pcmcia_register_driver - register a PCMCIA driver with the bus core + * @driver: the &driver being registered * * Registers a PCMCIA driver with the PCMCIA bus core. */ @@ -354,6 +355,7 @@ EXPORT_SYMBOL(pcmcia_register_driver); /** * pcmcia_unregister_driver - unregister a PCMCIA driver with the bus core + * @driver: the &driver being unregistered */ void pcmcia_unregister_driver(struct pcmcia_driver *driver) { @@ -840,8 +842,8 @@ static void pcmcia_bus_rescan(struct pcmcia_socket *skt, int new_cis) /** * pcmcia_load_firmware - load CIS from userspace if device-provided is broken - * @dev - the pcmcia device which needs a CIS override - * @filename - requested filename in /lib/firmware/ + * @dev: the pcmcia device which needs a CIS override + * @filename: requested filename in /lib/firmware/ * * This uses the in-kernel firmware loading mechanism to use a "fake CIS" if * the one provided by the card is broken. The firmware files reside in diff --git a/drivers/pcmcia/ti113x.h b/drivers/pcmcia/ti113x.h index 62e9ebf967f9..d29657bf1b40 100644 --- a/drivers/pcmcia/ti113x.h +++ b/drivers/pcmcia/ti113x.h @@ -874,7 +874,7 @@ static int ti1250_override(struct yenta_socket *socket) */ #ifdef CONFIG_YENTA_ENE_TUNE -/** +/* * set/clear various test bits: * Defaults to clear the bit. * - mask (u8) defines what bits to change diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c index 20853a03202d..0ab1fb65cdc3 100644 --- a/drivers/pcmcia/yenta_socket.c +++ b/drivers/pcmcia/yenta_socket.c @@ -48,7 +48,7 @@ MODULE_PARM_DESC(pwr_irqs_off, "Force IRQs off during power-on of slot. Use only #define to_cycles(ns) ((ns)/120) #define to_ns(cycles) ((cycles)*120) -/** +/* * yenta PCI irq probing. * currently only used in the TI/EnE initialization code */ @@ -888,7 +888,7 @@ static unsigned int yenta_probe_irq(struct yenta_socket *socket, u32 isa_irq_mas } -/** +/* * yenta PCI irq probing. * currently only used in the TI/EnE initialization code */ @@ -1012,7 +1012,7 @@ static void yenta_config_init(struct yenta_socket *socket) * invisible during PCI scans because of a misconfigured subordinate number * of the parent brige - some BIOSes seem to be too lazy to set it right. * Does the fixup carefully by checking how far it can go without conflicts. - * See http://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information. + * See http\://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information. */ static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge) { -- cgit v1.2.3-59-g8ed1b From da7ce6e2feb8e5b3ac3c1c365937c7ab009c76a2 Mon Sep 17 00:00:00 2001 From: Roel Kluin <12o3l@tiscali.nl> Date: Mon, 10 Dec 2007 15:49:24 -0800 Subject: asm-h8300: parentheses around definition CLOCK_TICK_RATE Some places where CLOCK_TICK_RATE may be used incorrectly: arch/arm/mach-mx3/time.c:125: __raw_writel((v / CLOCK_TICK_RATE) - 1, MXC_GPT_GPTPR); drivers/watchdog/davinci_wdt.c:103: timer_margin = (((u64)heartbeat * CLOCK_TICK_RATE) & 0xffffffff); drivers/watchdog/davinci_wdt.c:105: timer_margin = (((u64)heartbeat * CLOCK_TICK_RATE) >> 32); drivers/watchdog/ks8695_wdt.c:64: unsigned long tval = wdt_time * CLOCK_TICK_RATE; I'm not sure whether this definition is used there, but adding parentheses should be good anyway. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-h8300/timex.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-h8300/timex.h b/include/asm-h8300/timex.h index 20413145fabb..23e67013439f 100644 --- a/include/asm-h8300/timex.h +++ b/include/asm-h8300/timex.h @@ -6,7 +6,7 @@ #ifndef _ASM_H8300_TIMEX_H #define _ASM_H8300_TIMEX_H -#define CLOCK_TICK_RATE CONFIG_CPU_CLOCK*1000/8192 /* Timer input freq. */ +#define CLOCK_TICK_RATE (CONFIG_CPU_CLOCK*1000/8192) /* Timer input freq. */ typedef unsigned long cycles_t; extern short h8300_timer_count; -- cgit v1.2.3-59-g8ed1b From 037cdafe42c775020e7b0e8a16ff8f52233df4c7 Mon Sep 17 00:00:00 2001 From: Will Newton Date: Mon, 10 Dec 2007 15:49:25 -0800 Subject: pxa2xx_spi: fix typo in description Signed-off-by: Will Newton Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/pxa2xx_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index 5f3d808cbc29..1c2ab541d37d 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -39,7 +39,7 @@ #include MODULE_AUTHOR("Stephen Street"); -MODULE_DESCRIPTION("PXA2xx SSP SPI Contoller"); +MODULE_DESCRIPTION("PXA2xx SSP SPI Controller"); MODULE_LICENSE("GPL"); #define MAX_BUSES 3 -- cgit v1.2.3-59-g8ed1b From 6b1a80283908e463cbf1d96d48d7b989af0f2b2f Mon Sep 17 00:00:00 2001 From: Will Newton Date: Mon, 10 Dec 2007 15:49:26 -0800 Subject: spi_bfin5xx: fix typo in description Signed-off-by: Will Newton Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi_bfin5xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 22697b812205..7ef39a6e8c06 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -54,7 +54,7 @@ #define DRV_NAME "bfin-spi" #define DRV_AUTHOR "Bryan Wu, Luke Yang" -#define DRV_DESC "Blackfin BF5xx on-chip SPI Contoller Driver" +#define DRV_DESC "Blackfin BF5xx on-chip SPI Controller Driver" #define DRV_VERSION "1.0" MODULE_AUTHOR(DRV_AUTHOR); -- cgit v1.2.3-59-g8ed1b From 8805f2387086a7e6a9647d0713fc075694130d6c Mon Sep 17 00:00:00 2001 From: Will Newton Date: Mon, 10 Dec 2007 15:49:27 -0800 Subject: spi_imx: fix typo in description Signed-off-by: Will Newton Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi_imx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c index 7686ba34430f..2cd8573fb09c 100644 --- a/drivers/spi/spi_imx.c +++ b/drivers/spi/spi_imx.c @@ -1758,5 +1758,5 @@ static void __exit spi_imx_exit(void) module_exit(spi_imx_exit); MODULE_AUTHOR("Andrea Paterniani, "); -MODULE_DESCRIPTION("iMX SPI Contoller Driver"); +MODULE_DESCRIPTION("iMX SPI Controller Driver"); MODULE_LICENSE("GPL"); -- cgit v1.2.3-59-g8ed1b From 72fad7139b6829f71d7f41f39eb30da5760d90a8 Mon Sep 17 00:00:00 2001 From: Adam Litke Date: Mon, 10 Dec 2007 15:49:28 -0800 Subject: hugetlb: handle write-protection faults in follow_hugetlb_page The follow_hugetlb_page() fix I posted (merged as git commit 5b23dbe8173c212d6a326e35347b038705603d39) missed one case. If the pte is present, but not writable and write access is requested by the caller to get_user_pages(), the code will do the wrong thing. Rather than calling hugetlb_fault to make the pte writable, it notes the presence of the pte and continues. This simple one-liner makes sure we also fault on the pte for this case. Please apply. Signed-off-by: Adam Litke Acked-by: Dave Kleikamp Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 6121b57bbe96..6f978218c2c8 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -907,7 +907,7 @@ int follow_hugetlb_page(struct mm_struct *mm, struct vm_area_struct *vma, */ pte = huge_pte_offset(mm, vaddr & HPAGE_MASK); - if (!pte || pte_none(*pte)) { + if (!pte || pte_none(*pte) || (write && !pte_write(*pte))) { int ret; spin_unlock(&mm->page_table_lock); -- cgit v1.2.3-59-g8ed1b From 76832d8416430d6dd0575579ca1e00d1a790f4cb Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 10 Dec 2007 15:49:28 -0800 Subject: drivers/serial/uartlite.c: Add missing of_node_put There should be an of_node_put when breaking out of a loop that iterates using for_each_compatible_node. This was detected and fixed using the following semantic patch. (http://www.emn.fr/x-info/coccinelle/) // @@ identifier d; type T; expression e; iterator for_each_compatible_node; @@ T *d; ... for_each_compatible_node(d,...) {... when != of_node_put(d) when != e = d ( return d; | + of_node_put(d); ? return ...; ) ...} // Signed-off-by: Julia Lawall Acked-by: Grant Likely Acked-by: Peter Korsgaard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/uartlite.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c index a85f2d31a686..3f593247c41e 100644 --- a/drivers/serial/uartlite.c +++ b/drivers/serial/uartlite.c @@ -393,6 +393,7 @@ static inline void __init ulite_console_of_find_device(int id) continue; ulite_ports[id].mapbase = res.start; + of_node_put(np); return; } } -- cgit v1.2.3-59-g8ed1b From 794e64d5e9c7f088378e093a48eb36a30091d82d Mon Sep 17 00:00:00 2001 From: Neil Brown Date: Mon, 10 Dec 2007 15:49:30 -0800 Subject: Fix NULL dereference in umem.c Fix NULL dereference in umem.c Signed-off-by: Neil Brown Tested-by: Dave Chinner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/umem.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/block/umem.c b/drivers/block/umem.c index 99806f9ee4ce..5f5095afb06b 100644 --- a/drivers/block/umem.c +++ b/drivers/block/umem.c @@ -484,7 +484,8 @@ static void process_page(unsigned long data) page->idx++; if (page->idx >= bio->bi_vcnt) { page->bio = bio->bi_next; - page->idx = page->bio->bi_idx; + if (page->bio) + page->idx = page->bio->bi_idx; } pci_unmap_page(card->dev, desc->data_dma_handle, -- cgit v1.2.3-59-g8ed1b From 522939d45c293388e6a360210905f9230298df16 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 10 Dec 2007 15:49:31 -0800 Subject: esp_scsi: fix reset cleanup spinlock recursion The esp_reset_cleanup() function is called with the host lock held and invokes starget_for_each_device() which wants to take it too. Here is a fix along the lines of shost_for_each_device()/__shost_for_each_device() adding a __starget_for_each_device() counterpart which assumes the lock has already been taken. Eventually, I think the driver should get modified so that more work is done as a softirq rather than in the interrupt context, but for now it fixes a bug that causes the spinlock debugger to fire. While at it, it fixes a small number of cosmetic problems with starget_for_each_device() too. Signed-off-by: Maciej W. Rozycki Acked-by: David S. Miller Cc: James Bottomley Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/scsi/esp_scsi.c | 4 ++-- drivers/scsi/scsi.c | 31 +++++++++++++++++++++++++++++-- include/scsi/scsi_device.h | 3 +++ 3 files changed, 34 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c index 4ed3a5297066..bfdee5968892 100644 --- a/drivers/scsi/esp_scsi.c +++ b/drivers/scsi/esp_scsi.c @@ -2026,8 +2026,8 @@ static void esp_reset_cleanup(struct esp *esp) tp->flags |= ESP_TGT_CHECK_NEGO; if (tp->starget) - starget_for_each_device(tp->starget, NULL, - esp_clear_hold); + __starget_for_each_device(tp->starget, NULL, + esp_clear_hold); } esp->flags &= ~ESP_FLAG_RESETTING; } diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 192948822455..0fb1709ce5e3 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -896,11 +896,11 @@ EXPORT_SYMBOL(__scsi_iterate_devices); * starget_for_each_device - helper to walk all devices of a target * @starget: target whose devices we want to iterate over. * - * This traverses over each devices of @shost. The devices have + * This traverses over each device of @starget. The devices have * a reference that must be released by scsi_host_put when breaking * out of the loop. */ -void starget_for_each_device(struct scsi_target *starget, void * data, +void starget_for_each_device(struct scsi_target *starget, void *data, void (*fn)(struct scsi_device *, void *)) { struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); @@ -914,6 +914,33 @@ void starget_for_each_device(struct scsi_target *starget, void * data, } EXPORT_SYMBOL(starget_for_each_device); +/** + * __starget_for_each_device - helper to walk all devices of a target + * (UNLOCKED) + * @starget: target whose devices we want to iterate over. + * + * This traverses over each device of @starget. It does _not_ + * take a reference on the scsi_device, so the whole loop must be + * protected by shost->host_lock. + * + * Note: The only reason why drivers would want to use this is because + * they need to access the device list in irq context. Otherwise you + * really want to use starget_for_each_device instead. + **/ +void __starget_for_each_device(struct scsi_target *starget, void *data, + void (*fn)(struct scsi_device *, void *)) +{ + struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); + struct scsi_device *sdev; + + __shost_for_each_device(sdev, shost) { + if ((sdev->channel == starget->channel) && + (sdev->id == starget->id)) + fn(sdev, data); + } +} +EXPORT_SYMBOL(__starget_for_each_device); + /** * __scsi_device_lookup_by_target - find a device given the target (UNLOCKED) * @starget: SCSI target pointer diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 66e9058357e0..6c2d80b36aa1 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -242,6 +242,9 @@ extern struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *, uint); extern void starget_for_each_device(struct scsi_target *, void *, void (*fn)(struct scsi_device *, void *)); +extern void __starget_for_each_device(struct scsi_target *, void *, + void (*fn)(struct scsi_device *, + void *)); /* only exposed to implement shost_for_each_device */ extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *, -- cgit v1.2.3-59-g8ed1b From 6650e0a517bbfa1c47aa3da6b3562fcb1a066c63 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 10 Dec 2007 15:49:32 -0800 Subject: MAINTAINERS: update stale entries Some bad email addresses are removed: linux-tr@linuxtr.net ehaase@inf.fu-berlin.de Some are updated: linux@maxim.org.za to andrew@sanpeople.com linux-kernel@linux-mips.org to linux-mips@linux-mips.org jdike@karaya.com to jdike@addtoit.com The PCMCIA entry is corrected to a web address The ZR36120 VIDEO FOR LINUX DRIVER entry is removed Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 19 ++++--------------- 1 file changed, 4 insertions(+), 15 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index f3d7256bc74e..9507b4207512 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -88,7 +88,6 @@ S: Status, one of the following: P: Mike Phillips M: mikep@linuxtr.net L: netdev@vger.kernel.org -L: linux-tr@linuxtr.net W: http://www.linuxtr.net S: Maintained @@ -167,7 +166,6 @@ S: Maintained A2232 SERIAL BOARD DRIVER P: Enver Haase -M: ehaase@inf.fu-berlin.de M: A2232@gmx.net L: linux-m68k@lists.linux-m68k.org S: Maintained @@ -439,7 +437,7 @@ S: Maintained ARM/ATMEL AT91RM9200 ARM ARCHITECTURE P: Andrew Victor -M: linux@maxim.org.za +M: andrew@sanpeople.com L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) W: http://maxim.org.za/at91_26.html S: Maintained @@ -2064,7 +2062,7 @@ S: Maintained IOC3 SERIAL DRIVER P: Pat Gefre M: pfg@sgi.com -L: linux-kernel@linux-mips.org +L: linux-mips@linux-mips.org S: Maintained IP MASQUERADING: @@ -2815,7 +2813,6 @@ M: p2@ace.ulyssis.student.kuleuven.ac.be P: Mike Phillips M: mikep@linuxtr.net L: netdev@vger.kernel.org -L: linux-tr@linuxtr.net W: http://www.linuxtr.net S: Maintained @@ -2953,7 +2950,7 @@ S: Supported PCMCIA SUBSYSTEM P: Linux PCMCIA Team L: linux-pcmcia@lists.infradead.org -L: http://lists.infradead.org/mailman/listinfo/linux-pcmcia +W: http://lists.infradead.org/mailman/listinfo/linux-pcmcia T: git kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git S: Maintained @@ -3731,7 +3728,6 @@ TOKEN-RING NETWORK DRIVER P: Mike Phillips M: mikep@linuxtr.net L: netdev@vger.kernel.org -L: linux-tr@linuxtr.net W: http://www.linuxtr.net S: Maintained @@ -4049,7 +4045,7 @@ S: Maintained USER-MODE LINUX P: Jeff Dike -M: jdike@karaya.com +M: jdike@addtoit.com L: user-mode-linux-devel@lists.sourceforge.net L: user-mode-linux-user@lists.sourceforge.net W: http://user-mode-linux.sourceforge.net @@ -4280,13 +4276,6 @@ L: mjpeg-users@lists.sourceforge.net W: http://mjpeg.sourceforge.net/driver-zoran/ S: Maintained -ZR36120 VIDEO FOR LINUX DRIVER -P: Pauline Middelink -M: middelin@polyware.nl -W: http://www.polyware.nl/~middelin/En/hobbies.html -W: http://www.polyware.nl/~middelin/hobbies.html -S: Maintained - ZS DECSTATION Z85C30 SERIAL DRIVER P: Maciej W. Rozycki M: macro@linux-mips.org -- cgit v1.2.3-59-g8ed1b From d84248bf46582a406116c55b94405c05193773b1 Mon Sep 17 00:00:00 2001 From: Rini van Zetten Date: Mon, 10 Dec 2007 15:49:34 -0800 Subject: atmel_spi: reload RCR before TCR We have a wifi module connected to the spi bus and got sometimes FIFO overrun errors on the spi bus. After some investigation i found that the driver loads the TCR (transmit count) register before the RCR (receive count). When the transfer list is not empty the atmel_spi_next_message is called while tx and rx are enabled. As soon as the TCR is loaded, hardware starts transfer and causes a rx fifo overrun because the RCR is not loaded yet. Load the RCR before the TCR. After this patch the fifo overrun disapears at out setup. Signed-off-by: Haavard Skinnemoen Signed-off-by: Rini van Zetten Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/atmel_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index ff6a14bf1280..ff10808183a3 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -195,8 +195,8 @@ static void atmel_spi_next_xfer(struct spi_master *master, xfer, xfer->len, xfer->tx_buf, xfer->tx_dma, xfer->rx_buf, xfer->rx_dma, spi_readl(as, IMR)); - spi_writel(as, TCR, len); spi_writel(as, RCR, len); + spi_writel(as, TCR, len); spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN)); } -- cgit v1.2.3-59-g8ed1b From 3790ee4bd86396558eedd86faac1052cb782e4e1 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Mon, 10 Dec 2007 15:49:36 -0800 Subject: proc: remove/Fix proc generic d_revalidate Ultimately to implement /proc perfectly we need an implementation of d_revalidate because files and directories can be removed behind the back of the VFS, and d_revalidate is the only way we can let the VFS know that this has happened. Unfortunately the linux VFS can not cope with anything in the path to a mount point going away. So a proper d_revalidate method that calls d_drop also needs to call have_submounts which is moderately expensive, so you really don't want a d_revalidate method that unconditionally calls it, but instead only calls it when the backing object has really gone away. proc generic entries only disappear on module_unload (when not counting the fledgling network namespace) so it is quite rare that we actually encounter that case and has not actually caused us real world trouble yet. So until we get a proper test for keeping dentries in the dcache fix the current d_revalidate method by completely removing it. This returns us to the current status quo. So with CONFIG_NETNS=n things should look as they have always looked. For CONFIG_NETNS=y things work most of the time but there are a few rare corner cases that don't behave properly. As the network namespace is barely present in 2.6.24 this should not be a problem. Signed-off-by: Eric W. Biederman Cc: "Rafael J. Wysocki" Cc: Pavel Emelyanov Cc: "David S. Miller" Cc: Herbert Xu Cc: Alexey Dobriyan Cc: Trond Myklebust Cc: "Denis V. Lunev" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/proc/generic.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/fs/proc/generic.c b/fs/proc/generic.c index 8d49838e5554..6a2fe5187b62 100644 --- a/fs/proc/generic.c +++ b/fs/proc/generic.c @@ -374,16 +374,9 @@ static int proc_delete_dentry(struct dentry * dentry) return 1; } -static int proc_revalidate_dentry(struct dentry *dentry, struct nameidata *nd) -{ - d_drop(dentry); - return 0; -} - static struct dentry_operations proc_dentry_operations = { .d_delete = proc_delete_dentry, - .d_revalidate = proc_revalidate_dentry, }; /* -- cgit v1.2.3-59-g8ed1b From 7999f4b4e56d36265d789d52bb0c0bb0167346a7 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 10 Dec 2007 13:00:41 -0800 Subject: xen: relax signature check Some versions of Xen 3.x set their magic number to "xen-3.[12]", so relax the test to match them. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Linus Torvalds --- arch/x86/xen/enlighten.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 94c39aaf695f..b6af3ea43c73 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1131,7 +1131,7 @@ asmlinkage void __init xen_start_kernel(void) if (!xen_start_info) return; - BUG_ON(memcmp(xen_start_info->magic, "xen-3.0", 7) != 0); + BUG_ON(memcmp(xen_start_info->magic, "xen-3", 5) != 0); /* Install Xen paravirt ops */ pv_info = xen_info; -- cgit v1.2.3-59-g8ed1b From 82d29bf6dc7317aeb0a3a13c2348ca8591965875 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 10 Dec 2007 19:48:43 -0800 Subject: Linux 2.6.24-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 7fb1a2c08305..c1825aab77e8 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 24 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Arr Matey! A Hairy Bilge Rat! # *DOCUMENTATION* -- cgit v1.2.3-59-g8ed1b From 1df2e44560c0d72f381126e52a3ba53614c1c484 Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Fri, 7 Dec 2007 23:50:40 -0800 Subject: [IPV6] XFRM: Fix auditing rt6i_flags; use RTF_xxx flags instead of RTCF_xxx. RTCF_xxx flags, defined in include/linux/in_route.h) are available for IPv4 route (rtable) entries only. Use RTF_xxx flags instead, defined in include/linux/ipv6_route.h, for IPv6 route entries (rt6_info). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller --- net/ipv6/xfrm6_policy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c index 82e27b80d07d..b8e9eb445d74 100644 --- a/net/ipv6/xfrm6_policy.c +++ b/net/ipv6/xfrm6_policy.c @@ -233,7 +233,7 @@ __xfrm6_bundle_create(struct xfrm_policy *policy, struct xfrm_state **xfrm, int dst_prev->output = dst_prev->xfrm->outer_mode->afinfo->output; /* Sheit... I remember I did this right. Apparently, * it was magically lost, so this code needs audit */ - x->u.rt6.rt6i_flags = rt0->rt6i_flags&(RTCF_BROADCAST|RTCF_MULTICAST|RTCF_LOCAL); + x->u.rt6.rt6i_flags = rt0->rt6i_flags&(RTF_ANYCAST|RTF_LOCAL); x->u.rt6.rt6i_metric = rt0->rt6i_metric; x->u.rt6.rt6i_node = rt0->rt6i_node; x->u.rt6.rt6i_gateway = rt0->rt6i_gateway; -- cgit v1.2.3-59-g8ed1b From a4e65d36a959005f14142535b58c44cd0f1de8cb Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Fri, 7 Dec 2007 23:55:43 -0800 Subject: [IPV4]: Swap the ifa allocation with the"ipv4_devconf_setall" call According to Herbert, the ipv4_devconf_setall should be called only when the ifa is added to the device. However, failed ifa allocation may bring things into inconsistent state. Move the call to ipv4_devconf_setall after the ifa allocation. Fits both net-2.6 (with offsets) and net-2.6.25 (cleanly). Signed-off-by: Pavel Emelyanov Signed-off-by: David S. Miller --- net/ipv4/devinet.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index 55d199e4ae21..3168c3de4919 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -516,8 +516,6 @@ static struct in_ifaddr *rtm_to_ifaddr(struct nlmsghdr *nlh) goto errout; } - ipv4_devconf_setall(in_dev); - ifa = inet_alloc_ifa(); if (ifa == NULL) { /* @@ -528,6 +526,7 @@ static struct in_ifaddr *rtm_to_ifaddr(struct nlmsghdr *nlh) goto errout; } + ipv4_devconf_setall(in_dev); in_dev_hold(in_dev); if (tb[IFA_ADDRESS] == NULL) -- cgit v1.2.3-59-g8ed1b From 2017a72c070033830b460d31cd4703f9d2ec0d56 Mon Sep 17 00:00:00 2001 From: Thomas Graf Date: Mon, 10 Dec 2007 16:53:05 -0800 Subject: [IPv4] ESP: Discard dummy packets introduced in rfc4303 RFC4303 introduces dummy packets with a nexthdr value of 59 to implement traffic confidentiality. Such packets need to be dropped silently and the payload may not be attempted to be parsed as it consists of random chunk. Signed-off-by: Thomas Graf Signed-off-by: David S. Miller --- net/ipv4/esp4.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c index c31bccb9b526..1738113268bc 100644 --- a/net/ipv4/esp4.c +++ b/net/ipv4/esp4.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include #include @@ -224,6 +225,10 @@ static int esp_input(struct xfrm_state *x, struct sk_buff *skb) /* ... check padding bits here. Silly. :-) */ + /* RFC4303: Drop dummy packets without any error */ + if (nexthdr[1] == IPPROTO_NONE) + goto out; + iph = ip_hdr(skb); ihl = iph->ihl * 4; -- cgit v1.2.3-59-g8ed1b From 95a02cfd4d33886c166d4a5f309120f8d32ced58 Mon Sep 17 00:00:00 2001 From: Thomas Graf Date: Mon, 10 Dec 2007 16:53:29 -0800 Subject: [IPv6] ESP: Discard dummy packets introduced in rfc4303 RFC4303 introduces dummy packets with a nexthdr value of 59 to implement traffic confidentiality. Such packets need to be dropped silently and the payload may not be attempted to be parsed as it consists of random chunk. Signed-off-by: Thomas Graf Signed-off-by: David S. Miller --- net/ipv6/esp6.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c index 7db66f10e00d..444053254676 100644 --- a/net/ipv6/esp6.c +++ b/net/ipv6/esp6.c @@ -230,6 +230,12 @@ static int esp6_input(struct xfrm_state *x, struct sk_buff *skb) } /* ... check padding bits here. Silly. :-) */ + /* RFC4303: Drop dummy packets without any error */ + if (nexthdr[1] == IPPROTO_NONE) { + ret = -EINVAL; + goto out; + } + pskb_trim(skb, skb->len - alen - padlen - 2); ret = nexthdr[1]; } -- cgit v1.2.3-59-g8ed1b From 505a41d43c24345f3fa77ddab152d1f82dd8264d Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 10 Dec 2007 17:14:46 -0800 Subject: [UM]: Fix use of skb after netif_rx Recently, Wang Chen submitted a patch (d30f53aeb31d453a5230f526bea592af07944564) to move a call to netif_rx(skb) after a subsequent reference to skb, because netif_rx may call kfree_skb on its argument. The same problem occurs in some other drivers as well. This was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) // @@ expression skb, e,e1; @@ ( netif_rx(skb); | netif_rx_ni(skb); ) ... when != skb = e ( skb = e1 | * skb ) // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- arch/um/drivers/net_kern.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c index 73681f14f9fc..3c6c44ca1ffa 100644 --- a/arch/um/drivers/net_kern.c +++ b/arch/um/drivers/net_kern.c @@ -98,10 +98,10 @@ static int uml_net_rx(struct net_device *dev) if (pkt_len > 0) { skb_trim(skb, pkt_len); skb->protocol = (*lp->protocol)(skb); - netif_rx(skb); lp->stats.rx_bytes += skb->len; lp->stats.rx_packets++; + netif_rx(skb); return pkt_len; } -- cgit v1.2.3-59-g8ed1b From 299f590f26da9764f20e905879f0090552ff2e86 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 10 Dec 2007 17:16:56 -0800 Subject: [XTENSA]: Fix use of skb after netif_rx Recently, Wang Chen submitted a patch (d30f53aeb31d453a5230f526bea592af07944564) to move a call to netif_rx(skb) after a subsequent reference to skb, because netif_rx may call kfree_skb on its argument. The same problem occurs in some other drivers as well. This was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) // @@ expression skb, e,e1; @@ ( netif_rx(skb); | netif_rx_ni(skb); ) ... when != skb = e ( skb = e1 | * skb ) // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- arch/xtensa/platform-iss/network.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/xtensa/platform-iss/network.c b/arch/xtensa/platform-iss/network.c index b61fb36674e7..f21b9b0899a8 100644 --- a/arch/xtensa/platform-iss/network.c +++ b/arch/xtensa/platform-iss/network.c @@ -393,11 +393,11 @@ static int iss_net_rx(struct net_device *dev) if (pkt_len > 0) { skb_trim(skb, pkt_len); skb->protocol = lp->tp.protocol(skb); - // netif_rx(skb); - netif_rx_ni(skb); lp->stats.rx_bytes += skb->len; lp->stats.rx_packets++; + // netif_rx(skb); + netif_rx_ni(skb); return pkt_len; } kfree_skb(skb); -- cgit v1.2.3-59-g8ed1b From 9b3efc0133a807070dbd21254102995b65969965 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 10 Dec 2007 17:17:37 -0800 Subject: [S390]: Fix use of skb after netif_rx Recently, Wang Chen submitted a patch (d30f53aeb31d453a5230f526bea592af07944564) to move a call to netif_rx(skb) after a subsequent reference to skb, because netif_rx may call kfree_skb on its argument. netif_rx_ni calls netif_rx, so the same problem occurs in the files below. I have left the updating of dev->last_rx after the calls to netif_rx_ni because it seems time dependent, but moved the other field updates before. This was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) // @@ expression skb, e,e1; @@ ( netif_rx(skb); | netif_rx_ni(skb); ) ... when != skb = e ( skb = e1 | * skb ) // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/s390/net/ctcmain.c | 6 +++--- drivers/s390/net/netiucv.c | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/s390/net/ctcmain.c b/drivers/s390/net/ctcmain.c index 97adc701a819..77a503139e32 100644 --- a/drivers/s390/net/ctcmain.c +++ b/drivers/s390/net/ctcmain.c @@ -478,14 +478,14 @@ ctc_unpack_skb(struct channel *ch, struct sk_buff *pskb) skb->dev = pskb->dev; skb->protocol = pskb->protocol; pskb->ip_summed = CHECKSUM_UNNECESSARY; - netif_rx_ni(skb); /** - * Successful rx; reset logflags + * reset logflags */ ch->logflags = 0; - dev->last_rx = jiffies; privptr->stats.rx_packets++; privptr->stats.rx_bytes += skb->len; + netif_rx_ni(skb); + dev->last_rx = jiffies; if (len > 0) { skb_pull(pskb, header->length); if (skb_tailroom(pskb) < LL_HEADER_LENGTH) { diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c index 4d18d6419ddc..c7ea9381db9f 100644 --- a/drivers/s390/net/netiucv.c +++ b/drivers/s390/net/netiucv.c @@ -639,14 +639,14 @@ static void netiucv_unpack_skb(struct iucv_connection *conn, skb->dev = pskb->dev; skb->protocol = pskb->protocol; pskb->ip_summed = CHECKSUM_UNNECESSARY; + privptr->stats.rx_packets++; + privptr->stats.rx_bytes += skb->len; /* * Since receiving is always initiated from a tasklet (in iucv.c), * we must use netif_rx_ni() instead of netif_rx() */ netif_rx_ni(skb); dev->last_rx = jiffies; - privptr->stats.rx_packets++; - privptr->stats.rx_bytes += skb->len; skb_pull(pskb, header->next); skb_put(pskb, NETIUCV_HDRLEN); } -- cgit v1.2.3-59-g8ed1b From fb0c18bd1f61086fcfac90017b59891a356cc288 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 10 Dec 2007 17:18:23 -0800 Subject: [BNX2]: Add PHY_DIS_EARLY_DAC workaround. 5709 Ax and Bx chips all need this workaround. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index da767d3d5af5..a4f3832d0a66 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -6685,8 +6685,9 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) } else if (CHIP_NUM(bp) == CHIP_NUM_5706 || CHIP_NUM(bp) == CHIP_NUM_5708) bp->phy_flags |= PHY_CRC_FIX_FLAG; - else if (CHIP_ID(bp) == CHIP_ID_5709_A0 || - CHIP_ID(bp) == CHIP_ID_5709_A1) + else if (CHIP_NUM(bp) == CHIP_NUM_5709 && + (CHIP_REV(bp) == CHIP_REV_Ax || + CHIP_REV(bp) == CHIP_REV_Bx)) bp->phy_flags |= PHY_DIS_EARLY_DAC_FLAG; if ((CHIP_ID(bp) == CHIP_ID_5708_A0) || -- cgit v1.2.3-59-g8ed1b From c09c262783dcac62352293912d82b794063cefc3 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 10 Dec 2007 17:18:37 -0800 Subject: [BNX2]: Fix RX packet rot. Packets can be left in the RX ring if the NAPI budget is reached. This is caused by storing the latest rx index at the beginning of bnx2_rx_int(). We may not process all the work up to this index if the budget is reached and so some packets in the RX ring may rot when we later check for more work using this stored rx index. The fix is to not store this latest hw index and only store the processed rx index. We use a new function bnx2_get_hw_rx_cons() to fetch the latest hw rx index. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 26 ++++++++++++++------------ drivers/net/bnx2.h | 1 - 2 files changed, 14 insertions(+), 13 deletions(-) diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index a4f3832d0a66..f9eea6e84c87 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -2387,18 +2387,24 @@ bnx2_reuse_rx_skb(struct bnx2 *bp, struct sk_buff *skb, prod_bd->rx_bd_haddr_lo = cons_bd->rx_bd_haddr_lo; } +static inline u16 +bnx2_get_hw_rx_cons(struct bnx2 *bp) +{ + u16 cons = bp->status_blk->status_rx_quick_consumer_index0; + + if (unlikely((cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT)) + cons++; + return cons; +} + static int bnx2_rx_int(struct bnx2 *bp, int budget) { - struct status_block *sblk = bp->status_blk; u16 hw_cons, sw_cons, sw_ring_cons, sw_prod, sw_ring_prod; struct l2_fhdr *rx_hdr; int rx_pkt = 0; - hw_cons = bp->hw_rx_cons = sblk->status_rx_quick_consumer_index0; - if ((hw_cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT) { - hw_cons++; - } + hw_cons = bnx2_get_hw_rx_cons(bp); sw_cons = bp->rx_cons; sw_prod = bp->rx_prod; @@ -2515,10 +2521,7 @@ next_rx: /* Refresh hw_cons to see if there is new work */ if (sw_cons == hw_cons) { - hw_cons = bp->hw_rx_cons = - sblk->status_rx_quick_consumer_index0; - if ((hw_cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT) - hw_cons++; + hw_cons = bnx2_get_hw_rx_cons(bp); rmb(); } } @@ -2622,7 +2625,7 @@ bnx2_has_work(struct bnx2 *bp) { struct status_block *sblk = bp->status_blk; - if ((sblk->status_rx_quick_consumer_index0 != bp->hw_rx_cons) || + if ((bnx2_get_hw_rx_cons(bp) != bp->rx_cons) || (sblk->status_tx_quick_consumer_index0 != bp->hw_tx_cons)) return 1; @@ -2655,7 +2658,7 @@ static int bnx2_poll_work(struct bnx2 *bp, int work_done, int budget) if (sblk->status_tx_quick_consumer_index0 != bp->hw_tx_cons) bnx2_tx_int(bp); - if (sblk->status_rx_quick_consumer_index0 != bp->hw_rx_cons) + if (bnx2_get_hw_rx_cons(bp) != bp->rx_cons) work_done += bnx2_rx_int(bp, budget - work_done); return work_done; @@ -4177,7 +4180,6 @@ bnx2_init_rx_ring(struct bnx2 *bp) ring_prod = prod = bp->rx_prod = 0; bp->rx_cons = 0; - bp->hw_rx_cons = 0; bp->rx_prod_bseq = 0; for (i = 0; i < bp->rx_max_ring; i++) { diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index 1dce0d1a2581..30ba366608b0 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -6513,7 +6513,6 @@ struct bnx2 { u32 rx_prod_bseq; u16 rx_prod; u16 rx_cons; - u16 hw_rx_cons; u32 rx_csum; -- cgit v1.2.3-59-g8ed1b From bbe42974215eb7a483c344fca50652b3b9dd1ae4 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 10 Dec 2007 17:18:51 -0800 Subject: [BNX2]: Update version to 1.6.9. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index f9eea6e84c87..4e7b46e44874 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -56,8 +56,8 @@ #define DRV_MODULE_NAME "bnx2" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "1.6.8" -#define DRV_MODULE_RELDATE "October 17, 2007" +#define DRV_MODULE_VERSION "1.6.9" +#define DRV_MODULE_RELDATE "December 8, 2007" #define RUN_AT(x) (jiffies + (x)) -- cgit v1.2.3-59-g8ed1b From d59b54b150b3b69b721f1e161efd42ecb7619897 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Tue, 11 Dec 2007 02:28:03 -0800 Subject: [NET]: Fix wrong comments for unregister_net* There are some return value comments for void functions. Fixed it. Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/core/dev.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index 86d62611f2fc..26a3a3a15be0 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -3972,8 +3972,7 @@ void synchronize_net(void) * @dev: device * * This function shuts down a device interface and removes it - * from the kernel tables. On success 0 is returned, on a failure - * a negative errno code is returned. + * from the kernel tables. * * Callers must hold the rtnl semaphore. You may want * unregister_netdev() instead of this. @@ -3991,8 +3990,7 @@ void unregister_netdevice(struct net_device *dev) * @dev: device * * This function shuts down a device interface and removes it - * from the kernel tables. On success 0 is returned, on a failure - * a negative errno code is returned. + * from the kernel tables. * * This is just a wrapper for unregister_netdevice that takes * the rtnl semaphore. In general you want to use this and not -- cgit v1.2.3-59-g8ed1b From 3f03e387893ffa07a4d5dac96772f9db3221a185 Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Tue, 11 Dec 2007 02:41:25 -0800 Subject: [VLAN]: Fix potential race in vlan_cleanup_module vs vlan_ioctl_handler. The vlan module cleanup function starts with vlan_netlink_fini(); vlan_ioctl_set(NULL); The first call removes all the vlan devices and the second one closes the vlan ioctl. AFAIS there's a tiny race window between these two calls - after rtnl unregistered all the vlans, but the ioctl handler isn't set to NULL yet, user can manage to call this ioctl and create one vlan device, and that this function will later BUG_ON seeing non-emply hashes. I think, that we must first close the vlan ioctl and only after this remove all the vlans with the vlan_netlink_fini() call. Signed-off-by: Pavel Emelyanov Acked-by: Patrick McHardy Signed-off-by: David S. Miller --- net/8021q/vlan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c index 5b183156307a..4add9bd4bc8d 100644 --- a/net/8021q/vlan.c +++ b/net/8021q/vlan.c @@ -124,8 +124,8 @@ static void __exit vlan_cleanup_module(void) { int i; - vlan_netlink_fini(); vlan_ioctl_set(NULL); + vlan_netlink_fini(); /* Un-register us from receiving netdevice events */ unregister_netdevice_notifier(&vlan_notifier_block); -- cgit v1.2.3-59-g8ed1b From 75b8c133267053c9986a7c8db5131f0e7349e806 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 11 Dec 2007 04:38:08 -0800 Subject: [IPSEC]: Fix potential dst leak in xfrm_lookup If we get an error during the actual policy lookup we don't free the original dst while the caller expects us to always free the original dst in case of error. This patch fixes that. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/xfrm/xfrm_policy.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 9a4cf2e45a15..b91b16671c1e 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -1318,8 +1318,9 @@ restart: if (sk && sk->sk_policy[XFRM_POLICY_OUT]) { policy = xfrm_sk_policy_lookup(sk, XFRM_POLICY_OUT, fl); + err = PTR_ERR(policy); if (IS_ERR(policy)) - return PTR_ERR(policy); + goto dropdst; } if (!policy) { @@ -1330,8 +1331,9 @@ restart: policy = flow_cache_lookup(fl, dst_orig->ops->family, dir, xfrm_policy_lookup); + err = PTR_ERR(policy); if (IS_ERR(policy)) - return PTR_ERR(policy); + goto dropdst; } if (!policy) @@ -1501,8 +1503,9 @@ restart: return 0; error: - dst_release(dst_orig); xfrm_pols_put(pols, npols); +dropdst: + dst_release(dst_orig); *dst_p = NULL; return err; } -- cgit v1.2.3-59-g8ed1b From 8a75601035848e267baaae76b6e784cf1f899cd0 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 30 Oct 2007 04:16:35 -0300 Subject: V4L/DVB (6485): ivtv: fix compile warning Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-streams.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c index aa03e61ef310..74fb0e021979 100644 --- a/drivers/media/video/ivtv/ivtv-streams.c +++ b/drivers/media/video/ivtv/ivtv-streams.c @@ -76,7 +76,7 @@ static struct { int minor_offset; int dma, pio; enum v4l2_buf_type buf_type; - struct file_operations *fops; + const struct file_operations *fops; } ivtv_stream_info[] = { { /* IVTV_ENC_STREAM_TYPE_MPG */ "encoder MPG", -- cgit v1.2.3-59-g8ed1b From 2b2c93ac998896db0d2b754a4fd83479bda7efde Mon Sep 17 00:00:00 2001 From: Sascha Sommer Date: Sat, 3 Nov 2007 16:48:01 -0300 Subject: V4L/DVB (6540): em28xx: fix failing autodetection after the reboot The attached patch is required so that the autodetecion code also works after a reboot. Setting the I2C speed does not seem to be supported for em2800. Signed-off-by: Sascha Sommer Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-video.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 2529c298b862..d3dd6a0fc8a1 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -144,7 +144,8 @@ static int em28xx_config(struct em28xx *dev) { /* Sets I2C speed to 100 KHz */ - em28xx_write_regs_req(dev, 0x00, 0x06, "\x40", 1); + if (!dev->is_em2800) + em28xx_write_regs_req(dev, 0x00, 0x06, "\x40", 1); /* enable vbi capturing */ -- cgit v1.2.3-59-g8ed1b From f4b8b3ae13b2246cf7e1b998f0292f3297d03d41 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 3 Nov 2007 22:40:24 -0300 Subject: V4L/DVB (6542): Fix S-video mode on tvp5150 Thanks to Markus Reichberger to point this. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tvp5150.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/media/video/tvp5150.c b/drivers/media/video/tvp5150.c index 25d0aef88ef5..445eba4174d7 100644 --- a/drivers/media/video/tvp5150.c +++ b/drivers/media/video/tvp5150.c @@ -290,6 +290,7 @@ static inline void tvp5150_selmux(struct i2c_client *c) int opmode=0; struct tvp5150 *decoder = i2c_get_clientdata(c); int input = 0; + unsigned char val; if ((decoder->route.output & TVP5150_BLACK_SCREEN) || !decoder->enable) input = 8; @@ -315,6 +316,16 @@ static inline void tvp5150_selmux(struct i2c_client *c) tvp5150_write(c, TVP5150_OP_MODE_CTL, opmode); tvp5150_write(c, TVP5150_VD_IN_SRC_SEL_1, input); + + /* Svideo should enable YCrCb output and disable GPCL output + * For Composite and TV, it should be the reverse + */ + val = tvp5150_read(c, TVP5150_MISC_CTL); + if (decoder->route.input == TVP5150_SVIDEO) + val = (val & ~0x40) | 0x10; + else + val = (val & ~0x10) | 0x40; + tvp5150_write(c, TVP5150_MISC_CTL, val); }; struct i2c_reg_value { -- cgit v1.2.3-59-g8ed1b From 33f7771411c1f815208f6593d8fde8f9a135cea5 Mon Sep 17 00:00:00 2001 From: Hartmut Hackmann Date: Thu, 8 Nov 2007 08:54:53 -0300 Subject: V4L/DVB (6579): Fix bug #8824: Correct support for Diseqc on tda10086 This is a modified version of a patch previously posted by Thomas Unverzagt. Signed-off-by: Hartmut Hackmann Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda10086.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/media/dvb/frontends/tda10086.c b/drivers/media/dvb/frontends/tda10086.c index 9a8ddc537f8f..9d26ace65151 100644 --- a/drivers/media/dvb/frontends/tda10086.c +++ b/drivers/media/dvb/frontends/tda10086.c @@ -158,7 +158,7 @@ static int tda10086_init(struct dvb_frontend* fe) tda10086_write_byte(state, 0x3d, 0x80); // setup SEC - tda10086_write_byte(state, 0x36, 0x00); // all SEC off + tda10086_write_byte(state, 0x36, 0x80); // all SEC off, no 22k tone tda10086_write_byte(state, 0x34, (((1<<19) * (22000/1000)) / (SACLK/1000))); // } tone frequency tda10086_write_byte(state, 0x35, (((1<<19) * (22000/1000)) / (SACLK/1000)) >> 8); // } @@ -183,13 +183,13 @@ static int tda10086_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone) dprintk ("%s\n", __FUNCTION__); - switch(tone) { + switch (tone) { case SEC_TONE_OFF: - tda10086_write_byte(state, 0x36, 0x00); + tda10086_write_byte(state, 0x36, 0x80); break; case SEC_TONE_ON: - tda10086_write_byte(state, 0x36, 0x01); + tda10086_write_byte(state, 0x36, 0x81); break; } @@ -212,7 +212,7 @@ static int tda10086_send_master_cmd (struct dvb_frontend* fe, for(i=0; i< cmd->msg_len; i++) { tda10086_write_byte(state, 0x48+i, cmd->msg[i]); } - tda10086_write_byte(state, 0x36, 0x08 | ((cmd->msg_len - 1) << 4)); + tda10086_write_byte(state, 0x36, 0x88 | ((cmd->msg_len - 1) << 4)); tda10086_diseqc_wait(state); @@ -230,11 +230,11 @@ static int tda10086_send_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t minic switch(minicmd) { case SEC_MINI_A: - tda10086_write_byte(state, 0x36, 0x04); + tda10086_write_byte(state, 0x36, 0x84); break; case SEC_MINI_B: - tda10086_write_byte(state, 0x36, 0x06); + tda10086_write_byte(state, 0x36, 0x86); break; } -- cgit v1.2.3-59-g8ed1b From 63337dd3f5506628e4831b08e39e09d7f1407769 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 10 Nov 2007 10:26:20 -0300 Subject: V4L/DVB (6581): Fix: avoids negative vma usage count Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-video.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index d3dd6a0fc8a1..0906bc5766cc 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -571,7 +571,9 @@ static void em28xx_vm_close(struct vm_area_struct *vma) { /* NOTE: buffers are not freed here */ struct em28xx_frame_t *f = vma->vm_private_data; - f->vma_use_count--; + + if (f->vma_use_count) + f->vma_use_count--; } static struct vm_operations_struct em28xx_vm_ops = { -- cgit v1.2.3-59-g8ed1b From 19bc5133dae9562e8824ef101464061f9854c1d8 Mon Sep 17 00:00:00 2001 From: Brandon Philips Date: Tue, 13 Nov 2007 20:05:38 -0300 Subject: V4L/DVB (6601): V4L: videobuf-core locking fixes and comments - Add comments to functions that require that caller hold q->lock - Add __videobuf_mmap_free that doesn't hold q->lock for use within videobuf - Add locking to videobuf_mmap_free - Fix linux/drivers/media/common/saa7146_video.c which was holding lock around videobuf_read_stop - Add locking to functions that operate on a queue - Add videobuf_stop to take care of stopping in both the read and stream case TODO: bttv still has an unsafe call to videobuf_queue_is_busy Signed-off-by: Brandon Philips Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/saa7146_video.c | 5 +- drivers/media/video/videobuf-core.c | 247 ++++++++++++++++++++++------------- include/media/videobuf-core.h | 2 + 3 files changed, 161 insertions(+), 93 deletions(-) diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c index f245a3b2ef47..7cc4213ba56b 100644 --- a/drivers/media/common/saa7146_video.c +++ b/drivers/media/common/saa7146_video.c @@ -1440,10 +1440,7 @@ static void video_close(struct saa7146_dev *dev, struct file *file) err = saa7146_stop_preview(fh); } - // release all capture buffers - mutex_lock(&q->lock); - videobuf_read_stop(q); - mutex_unlock(&q->lock); + videobuf_stop(q); /* hmm, why is this function declared void? */ /* return err */ diff --git a/drivers/media/video/videobuf-core.c b/drivers/media/video/videobuf-core.c index 89a44f16f0ba..de2f56b19163 100644 --- a/drivers/media/video/videobuf-core.c +++ b/drivers/media/video/videobuf-core.c @@ -141,6 +141,7 @@ void videobuf_queue_core_init(struct videobuf_queue* q, INIT_LIST_HEAD(&q->stream); } +/* Locking: Only usage in bttv unsafe find way to remove */ int videobuf_queue_is_busy(struct videobuf_queue *q) { int i; @@ -178,6 +179,7 @@ int videobuf_queue_is_busy(struct videobuf_queue *q) return 0; } +/* Locking: Caller holds q->lock */ void videobuf_queue_cancel(struct videobuf_queue *q) { unsigned long flags=0; @@ -208,6 +210,7 @@ void videobuf_queue_cancel(struct videobuf_queue *q) /* --------------------------------------------------------------------- */ +/* Locking: Caller holds q->lock */ enum v4l2_field videobuf_next_field(struct videobuf_queue *q) { enum v4l2_field field = q->field; @@ -226,6 +229,7 @@ enum v4l2_field videobuf_next_field(struct videobuf_queue *q) return field; } +/* Locking: Caller holds q->lock */ static void videobuf_status(struct videobuf_queue *q, struct v4l2_buffer *b, struct videobuf_buffer *vb, enum v4l2_buf_type type) { @@ -281,20 +285,108 @@ static void videobuf_status(struct videobuf_queue *q, struct v4l2_buffer *b, b->sequence = vb->field_count >> 1; } +/* Locking: Caller holds q->lock */ +static int __videobuf_mmap_free(struct videobuf_queue *q) +{ + int i; + int rc; + + if (!q) + return 0; + + MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS); + + rc = CALL(q,mmap_free,q); + if (rc<0) + return rc; + + for (i = 0; i < VIDEO_MAX_FRAME; i++) { + if (NULL == q->bufs[i]) + continue; + q->ops->buf_release(q,q->bufs[i]); + kfree(q->bufs[i]); + q->bufs[i] = NULL; + } + + return rc; +} + +int videobuf_mmap_free(struct videobuf_queue *q) +{ + int ret; + mutex_lock(&q->lock); + ret = __videobuf_mmap_free(q); + mutex_unlock(&q->lock); + return ret; +} + +/* Locking: Caller holds q->lock */ +static int __videobuf_mmap_setup(struct videobuf_queue *q, + unsigned int bcount, unsigned int bsize, + enum v4l2_memory memory) +{ + unsigned int i; + int err; + + MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS); + + err = __videobuf_mmap_free(q); + if (0 != err) + return err; + + /* Allocate and initialize buffers */ + for (i = 0; i < bcount; i++) { + q->bufs[i] = videobuf_alloc(q); + + if (q->bufs[i] == NULL) + break; + + q->bufs[i]->i = i; + q->bufs[i]->input = UNSET; + q->bufs[i]->memory = memory; + q->bufs[i]->bsize = bsize; + switch (memory) { + case V4L2_MEMORY_MMAP: + q->bufs[i]->boff = bsize * i; + break; + case V4L2_MEMORY_USERPTR: + case V4L2_MEMORY_OVERLAY: + /* nothing */ + break; + } + } + + if (!i) + return -ENOMEM; + + dprintk(1,"mmap setup: %d buffers, %d bytes each\n", + i, bsize); + + return i; +} + +int videobuf_mmap_setup(struct videobuf_queue *q, + unsigned int bcount, unsigned int bsize, + enum v4l2_memory memory) +{ + int ret; + mutex_lock(&q->lock); + ret = __videobuf_mmap_setup(q, bcount, bsize, memory); + mutex_unlock(&q->lock); + return ret; +} + int videobuf_reqbufs(struct videobuf_queue *q, struct v4l2_requestbuffers *req) { unsigned int size,count; int retval; - if (req->type != q->type) { - dprintk(1,"reqbufs: queue type invalid\n"); - return -EINVAL; - } if (req->count < 1) { dprintk(1,"reqbufs: count invalid (%d)\n",req->count); return -EINVAL; } + if (req->memory != V4L2_MEMORY_MMAP && req->memory != V4L2_MEMORY_USERPTR && req->memory != V4L2_MEMORY_OVERLAY) { @@ -303,6 +395,12 @@ int videobuf_reqbufs(struct videobuf_queue *q, } mutex_lock(&q->lock); + if (req->type != q->type) { + dprintk(1,"reqbufs: queue type invalid\n"); + retval = -EINVAL; + goto done; + } + if (q->streaming) { dprintk(1,"reqbufs: streaming already exists\n"); retval = -EBUSY; @@ -323,7 +421,7 @@ int videobuf_reqbufs(struct videobuf_queue *q, dprintk(1,"reqbufs: bufs=%d, size=0x%x [%d pages total]\n", count, size, (count*size)>>PAGE_SHIFT); - retval = videobuf_mmap_setup(q,count,size,req->memory); + retval = __videobuf_mmap_setup(q,count,size,req->memory); if (retval < 0) { dprintk(1,"reqbufs: mmap setup returned %d\n",retval); goto done; @@ -338,20 +436,28 @@ int videobuf_reqbufs(struct videobuf_queue *q, int videobuf_querybuf(struct videobuf_queue *q, struct v4l2_buffer *b) { + int ret = -EINVAL; + + mutex_lock(&q->lock); if (unlikely(b->type != q->type)) { dprintk(1,"querybuf: Wrong type.\n"); - return -EINVAL; + goto done; } if (unlikely(b->index < 0 || b->index >= VIDEO_MAX_FRAME)) { dprintk(1,"querybuf: index out of range.\n"); - return -EINVAL; + goto done; } if (unlikely(NULL == q->bufs[b->index])) { dprintk(1,"querybuf: buffer is null.\n"); - return -EINVAL; + goto done; } + videobuf_status(q,b,q->bufs[b->index],q->type); - return 0; + + ret = 0; +done: + mutex_unlock(&q->lock); + return ret; } int videobuf_qbuf(struct videobuf_queue *q, @@ -541,22 +647,30 @@ int videobuf_streamon(struct videobuf_queue *q) return retval; } -int videobuf_streamoff(struct videobuf_queue *q) +/* Locking: Caller holds q->lock */ +static int __videobuf_streamoff(struct videobuf_queue *q) { - int retval = -EINVAL; - - mutex_lock(&q->lock); if (!q->streaming) - goto done; + return -EINVAL; + videobuf_queue_cancel(q); q->streaming = 0; - retval = 0; - done: + return 0; +} + +int videobuf_streamoff(struct videobuf_queue *q) +{ + int retval; + + mutex_lock(&q->lock); + retval = __videobuf_streamoff(q); mutex_unlock(&q->lock); + return retval; } +/* Locking: Caller holds q->lock */ static ssize_t videobuf_read_zerocopy(struct videobuf_queue *q, char __user *data, size_t count, loff_t *ppos) @@ -691,6 +805,7 @@ ssize_t videobuf_read_one(struct videobuf_queue *q, return retval; } +/* Locking: Caller holds q->lock */ int videobuf_read_start(struct videobuf_queue *q) { enum v4l2_field field; @@ -705,7 +820,7 @@ int videobuf_read_start(struct videobuf_queue *q) count = VIDEO_MAX_FRAME; size = PAGE_ALIGN(size); - err = videobuf_mmap_setup(q, count, size, V4L2_MEMORY_USERPTR); + err = __videobuf_mmap_setup(q, count, size, V4L2_MEMORY_USERPTR); if (err < 0) return err; @@ -728,12 +843,13 @@ int videobuf_read_start(struct videobuf_queue *q) return 0; } -void videobuf_read_stop(struct videobuf_queue *q) +static void __videobuf_read_stop(struct videobuf_queue *q) { int i; + videobuf_queue_cancel(q); - videobuf_mmap_free(q); + __videobuf_mmap_free(q); INIT_LIST_HEAD(&q->stream); for (i = 0; i < VIDEO_MAX_FRAME; i++) { if (NULL == q->bufs[i]) @@ -743,8 +859,30 @@ void videobuf_read_stop(struct videobuf_queue *q) } q->read_buf = NULL; q->reading = 0; + +} + +void videobuf_read_stop(struct videobuf_queue *q) +{ + mutex_lock(&q->lock); + __videobuf_read_stop(q); + mutex_unlock(&q->lock); +} + +void videobuf_stop(struct videobuf_queue *q) +{ + mutex_lock(&q->lock); + + if (q->streaming) + __videobuf_streamoff(q); + + if (q->reading) + __videobuf_read_stop(q); + + mutex_unlock(&q->lock); } + ssize_t videobuf_read_stream(struct videobuf_queue *q, char __user *data, size_t count, loff_t *ppos, int vbihack, int nonblocking) @@ -858,75 +996,6 @@ unsigned int videobuf_poll_stream(struct file *file, return rc; } -int videobuf_mmap_setup(struct videobuf_queue *q, - unsigned int bcount, unsigned int bsize, - enum v4l2_memory memory) -{ - unsigned int i; - int err; - - MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS); - - err = videobuf_mmap_free(q); - if (0 != err) - return err; - - /* Allocate and initialize buffers */ - for (i = 0; i < bcount; i++) { - q->bufs[i] = videobuf_alloc(q); - - if (q->bufs[i] == NULL) - break; - - q->bufs[i]->i = i; - q->bufs[i]->input = UNSET; - q->bufs[i]->memory = memory; - q->bufs[i]->bsize = bsize; - switch (memory) { - case V4L2_MEMORY_MMAP: - q->bufs[i]->boff = bsize * i; - break; - case V4L2_MEMORY_USERPTR: - case V4L2_MEMORY_OVERLAY: - /* nothing */ - break; - } - } - - if (!i) - return -ENOMEM; - - dprintk(1,"mmap setup: %d buffers, %d bytes each\n", - i, bsize); - - return i; -} - -int videobuf_mmap_free(struct videobuf_queue *q) -{ - int i; - int rc; - - if (!q) - return 0; - - MAGIC_CHECK(q->int_ops->magic,MAGIC_QTYPE_OPS); - - rc = CALL(q,mmap_free,q); - if (rc<0) - return rc; - - for (i = 0; i < VIDEO_MAX_FRAME; i++) { - if (NULL == q->bufs[i]) - continue; - q->ops->buf_release(q,q->bufs[i]); - kfree(q->bufs[i]); - q->bufs[i] = NULL; - } - - return rc; -} - int videobuf_mmap_mapper(struct videobuf_queue *q, struct vm_area_struct *vma) { @@ -989,8 +1058,8 @@ EXPORT_SYMBOL_GPL(videobuf_dqbuf); EXPORT_SYMBOL_GPL(videobuf_streamon); EXPORT_SYMBOL_GPL(videobuf_streamoff); -EXPORT_SYMBOL_GPL(videobuf_read_start); EXPORT_SYMBOL_GPL(videobuf_read_stop); +EXPORT_SYMBOL_GPL(videobuf_stop); EXPORT_SYMBOL_GPL(videobuf_read_stream); EXPORT_SYMBOL_GPL(videobuf_read_one); EXPORT_SYMBOL_GPL(videobuf_poll_stream); diff --git a/include/media/videobuf-core.h b/include/media/videobuf-core.h index 0fa5d5912555..4fd5d0eaa935 100644 --- a/include/media/videobuf-core.h +++ b/include/media/videobuf-core.h @@ -208,6 +208,8 @@ int videobuf_cgmbuf(struct videobuf_queue *q, int videobuf_streamon(struct videobuf_queue *q); int videobuf_streamoff(struct videobuf_queue *q); +void videobuf_stop(struct videobuf_queue *q); + int videobuf_read_start(struct videobuf_queue *q); void videobuf_read_stop(struct videobuf_queue *q); ssize_t videobuf_read_stream(struct videobuf_queue *q, -- cgit v1.2.3-59-g8ed1b From 053fcb6014eef31c2674d344c704118e0ac229ef Mon Sep 17 00:00:00 2001 From: Brandon Philips Date: Tue, 13 Nov 2007 20:11:26 -0300 Subject: V4L/DVB (6602): V4L: Convert videobuf drivers to videobuf_stop Drivers were using cookie cutter code for stopping the read/stream. Use the new videobuf_stop function which is lock safe. Signed-off-by: Brandon Philips Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bt8xx/bttv-driver.c | 5 +---- drivers/media/video/cx88/cx88-blackbird.c | 5 +---- drivers/media/video/cx88/cx88-video.c | 5 +---- drivers/media/video/saa7134/saa7134-empress.c | 5 +---- drivers/media/video/saa7134/saa7134-video.c | 5 +---- drivers/media/video/vivi.c | 1 + 6 files changed, 6 insertions(+), 20 deletions(-) diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index a88b56e6ca05..2182ef089ebf 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -3827,10 +3827,7 @@ static int bttv_release(struct inode *inode, struct file *file) /* stop vbi capture */ if (check_btres(fh, RESOURCE_VBI)) { - if (fh->vbi.streaming) - videobuf_streamoff(&fh->vbi); - if (fh->vbi.reading) - videobuf_read_stop(&fh->vbi); + videobuf_stop(&fh->vbi); free_btres(btv,fh,RESOURCE_VBI); } diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index f33f0b47142c..f802b5653569 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -1085,10 +1085,7 @@ static int mpeg_release(struct inode *inode, struct file *file) cx8802_cancel_buffers(fh->dev); /* stop mpeg capture */ - if (fh->mpegq.streaming) - videobuf_streamoff(&fh->mpegq); - if (fh->mpegq.reading) - videobuf_read_stop(&fh->mpegq); + videobuf_stop(&fh->mpegq); videobuf_mmap_free(&fh->mpegq); file->private_data = NULL; diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index 5ee05f8f3fad..c84dafbdb991 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -851,10 +851,7 @@ static int video_release(struct inode *inode, struct file *file) /* stop vbi capture */ if (res_check(fh, RESOURCE_VBI)) { - if (fh->vbiq.streaming) - videobuf_streamoff(&fh->vbiq); - if (fh->vbiq.reading) - videobuf_read_stop(&fh->vbiq); + videobuf_stop(&fh->vbiq); res_free(dev,fh,RESOURCE_VBI); } diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c index 75d0c5bf46d2..9322f44865b8 100644 --- a/drivers/media/video/saa7134/saa7134-empress.c +++ b/drivers/media/video/saa7134/saa7134-empress.c @@ -110,11 +110,8 @@ static int ts_release(struct inode *inode, struct file *file) { struct saa7134_dev *dev = file->private_data; - if (dev->empress_tsq.streaming) - videobuf_streamoff(&dev->empress_tsq); mutex_lock(&dev->empress_tsq.lock); - if (dev->empress_tsq.reading) - videobuf_read_stop(&dev->empress_tsq); + videobuf_stop(&dev->empress_tsq); videobuf_mmap_free(&dev->empress_tsq); dev->empress_users--; diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c index 3b9ffb4b648a..6396d9b5c063 100644 --- a/drivers/media/video/saa7134/saa7134-video.c +++ b/drivers/media/video/saa7134/saa7134-video.c @@ -1445,10 +1445,7 @@ static int video_release(struct inode *inode, struct file *file) /* stop vbi capture */ if (res_check(fh, RESOURCE_VBI)) { - if (fh->vbi.streaming) - videobuf_streamoff(&fh->vbi); - if (fh->vbi.reading) - videobuf_read_stop(&fh->vbi); + videobuf_stop(&fh->vbi); res_free(dev,fh,RESOURCE_VBI); } diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index ee73dc75131c..9b54ff9d2e36 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -1076,6 +1076,7 @@ static int vivi_release(struct inode *inode, struct file *file) int minor = iminor(inode); vivi_stop_thread(vidq); + videobuf_stop(&fh->vb_vidq); videobuf_mmap_free(&fh->vb_vidq); kfree (fh); -- cgit v1.2.3-59-g8ed1b From 820eacd84cff23b76693f4be1e28feb672f4488f Mon Sep 17 00:00:00 2001 From: Brandon Philips Date: Mon, 19 Nov 2007 15:10:48 -0300 Subject: V4L/DVB (6615): V4L: Fix VIDIOCGMBUF locking in saa7146 Fallout from videobuf_mmap_setup() locking fixes. Signed-off-by: Brandon Philips Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/saa7146_video.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c index 7cc4213ba56b..ae36d101006b 100644 --- a/drivers/media/common/saa7146_video.c +++ b/drivers/media/common/saa7146_video.c @@ -1205,13 +1205,10 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int DEB_D(("VIDIOCGMBUF \n")); q = &fh->video_q; - mutex_lock(&q->lock); err = videobuf_mmap_setup(q,gbuffers,gbufsize, V4L2_MEMORY_MMAP); - if (err < 0) { - mutex_unlock(&q->lock); + if (err < 0) return err; - } gbuffers = err; memset(mbuf,0,sizeof(*mbuf)); @@ -1219,7 +1216,6 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int mbuf->size = gbuffers * gbufsize; for (i = 0; i < gbuffers; i++) mbuf->offsets[i] = i * gbufsize; - mutex_unlock(&q->lock); return 0; } #endif -- cgit v1.2.3-59-g8ed1b From 78f3b0b672c79df9ffa55399a7d6fc4b173e9b4b Mon Sep 17 00:00:00 2001 From: Chris Pascoe Date: Mon, 19 Nov 2007 03:47:07 -0300 Subject: V4L/DVB (6629): zl10353: fix default adc_clock and TRL nominal rate calculation The default adc_clock for the zl10353 is different from what was originally thought to be the case and the TRL nominal rate formula was incorrect as a result. Use a better (and hopefully now correct) formula. Signed-off-by: Chris Pascoe Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/zl10353.c | 4 ++-- drivers/media/dvb/frontends/zl10353.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/frontends/zl10353.c b/drivers/media/dvb/frontends/zl10353.c index a97a7fd2c891..0106df4c55e8 100644 --- a/drivers/media/dvb/frontends/zl10353.c +++ b/drivers/media/dvb/frontends/zl10353.c @@ -122,7 +122,7 @@ static void zl10353_calc_nominal_rate(struct dvb_frontend *fe, enum fe_bandwidth bandwidth, u16 *nominal_rate) { - u32 adc_clock = 22528; /* 20.480 MHz on the board(!?) */ + u32 adc_clock = 45056; /* 45.056 MHz */ u8 bw; struct zl10353_state *state = fe->demodulator_priv; @@ -142,7 +142,7 @@ static void zl10353_calc_nominal_rate(struct dvb_frontend *fe, break; } - *nominal_rate = (64 * bw * (1<<16) / (7 * 8) * 4000 / adc_clock + 2) / 4; + *nominal_rate = (bw * (1 << 23) / 7 * 125 + adc_clock / 2) / adc_clock; dprintk("%s: bw %d, adc_clock %d => 0x%x\n", __FUNCTION__, bw, adc_clock, *nominal_rate); diff --git a/drivers/media/dvb/frontends/zl10353.h b/drivers/media/dvb/frontends/zl10353.h index cb274dc12b82..1c3d494a6da9 100644 --- a/drivers/media/dvb/frontends/zl10353.h +++ b/drivers/media/dvb/frontends/zl10353.h @@ -30,7 +30,7 @@ struct zl10353_config u8 demod_address; /* frequencies in kHz */ - int adc_clock; // default: 22528 + int adc_clock; /* default: 45056 */ /* set if no pll is connected to the secondary i2c bus */ int no_tuner; -- cgit v1.2.3-59-g8ed1b From 174eb8e8cb1ec97904ddeaae54366a03789162ef Mon Sep 17 00:00:00 2001 From: Heikki Lindholm Date: Fri, 23 Nov 2007 18:59:18 -0300 Subject: V4L/DVB (6666): saa7134-alsa: fix period handling The period handling in saa7134-alsa is broken in two ways. First, the minimum number of periods of two does not work, because the dma is setup two periods ahead in the irq handler. Fix the minimum to four periods. Second, the code assumes that the number of periods is divisible by two, which isn't always the case on ALSA. Fix by adding a constraint. Signed-off-by: Heikki Lindholm Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-alsa.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c index b9c5cf7dc849..ece177de72a5 100644 --- a/drivers/media/video/saa7134/saa7134-alsa.c +++ b/drivers/media/video/saa7134/saa7134-alsa.c @@ -457,7 +457,7 @@ static struct snd_pcm_hardware snd_card_saa7134_capture = .buffer_bytes_max = (256*1024), .period_bytes_min = 64, .period_bytes_max = (256*1024), - .periods_min = 2, + .periods_min = 4, .periods_max = 1024, }; @@ -491,7 +491,7 @@ static int snd_card_saa7134_hw_params(struct snd_pcm_substream * substream, snd_assert(period_size >= 0x100 && period_size <= 0x10000, return -EINVAL); - snd_assert(periods >= 2, return -EINVAL); + snd_assert(periods >= 4, return -EINVAL); snd_assert(period_size * periods <= 1024 * 1024, return -EINVAL); dev = saa7134->dev; @@ -647,7 +647,14 @@ static int snd_card_saa7134_capture_open(struct snd_pcm_substream * substream) saa7134_tvaudio_setmute(dev); } - if ((err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS)) < 0) + err = snd_pcm_hw_constraint_integer(runtime, + SNDRV_PCM_HW_PARAM_PERIODS); + if (err < 0) + return err; + + err = snd_pcm_hw_constraint_step(runtime, 0, + SNDRV_PCM_HW_PARAM_PERIODS, 2); + if (err < 0) return err; return 0; -- cgit v1.2.3-59-g8ed1b From b730a81c51adc8e87ae3b055fc211af7d5472df2 Mon Sep 17 00:00:00 2001 From: Richard Knutsson Date: Tue, 27 Nov 2007 06:59:37 -0300 Subject: V4L/DVB (6684): Complement va_start() with va_end() + style fixes Complement va_start() with va_end() + minor style fixes in the same function. Signed-off-by: Richard Knutsson Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa5246a.c | 10 ++++++---- drivers/media/video/saa5249.c | 8 +++++--- 2 files changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/media/video/saa5246a.c b/drivers/media/video/saa5246a.c index ad0232935df6..996b49491f5a 100644 --- a/drivers/media/video/saa5246a.c +++ b/drivers/media/video/saa5246a.c @@ -187,12 +187,14 @@ static int i2c_senddata(struct saa5246a_device *t, ...) { unsigned char buf[64]; int v; - int ct=0; + int ct = 0; va_list argp; - va_start(argp,t); + va_start(argp, t); - while((v=va_arg(argp,int))!=-1) - buf[ct++]=v; + while ((v = va_arg(argp, int)) != -1) + buf[ct++] = v; + + va_end(argp); return i2c_sendbuf(t, buf[0], ct-1, buf+1); } diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c index 94bb59a32b17..f55d6e85f20f 100644 --- a/drivers/media/video/saa5249.c +++ b/drivers/media/video/saa5249.c @@ -282,12 +282,14 @@ static int i2c_senddata(struct saa5249_device *t, ...) { unsigned char buf[64]; int v; - int ct=0; + int ct = 0; va_list argp; va_start(argp,t); - while((v=va_arg(argp,int))!=-1) - buf[ct++]=v; + while ((v = va_arg(argp, int)) != -1) + buf[ct++] = v; + + va_end(argp); return i2c_sendbuf(t, buf[0], ct-1, buf+1); } -- cgit v1.2.3-59-g8ed1b From 4aa504a89a140f482ddabb45460e0005bf3e522a Mon Sep 17 00:00:00 2001 From: Hermann Pitton Date: Wed, 28 Nov 2007 21:50:26 -0300 Subject: V4L/DVB (6686): saa7134: fix composite over s-video input on the Tevion MD 9717 The vmux for composite over s-video input was wrong. Signed-off-by: Hermann Pitton Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-cards.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 4f3dad9ae6d6..c6eb1e37a46e 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -334,7 +334,7 @@ struct saa7134_board saa7134_boards[] = { .tv = 1, },{ .name = name_comp1, - .vmux = 2, + .vmux = 0, .amux = LINE1, },{ .name = name_comp2, -- cgit v1.2.3-59-g8ed1b From 843b1378c2ab47ab1ed9cb471938e0f0ec839fcd Mon Sep 17 00:00:00 2001 From: Heikki Lindholm Date: Fri, 30 Nov 2007 13:27:26 -0300 Subject: V4L/DVB (6690): saa7134: fix ignored interrupts The saa7134 video driver starts dropping frames when used together with the saa7134-alsa driver. Frames are dropped because when an audio event is waiting the driver simply ignores the interrupt and passes it on to the saa7134-alsa interrupt handler. The alsa interrupt handler in turn acknowledges all types of events thus clearing the pending video events as well. Fix by only masking out the audio event in the video interrupt handler and by only acknowledging the audio event in the alsa driver. Signed-off-by: Heikki Lindholm Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-alsa.c | 3 ++- drivers/media/video/saa7134/saa7134-core.c | 21 +++++++++++---------- 2 files changed, 13 insertions(+), 11 deletions(-) diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c index ece177de72a5..4878f3067787 100644 --- a/drivers/media/video/saa7134/saa7134-alsa.c +++ b/drivers/media/video/saa7134/saa7134-alsa.c @@ -222,7 +222,8 @@ static irqreturn_t saa7134_alsa_irq(int irq, void *dev_id) if (report & SAA7134_IRQ_REPORT_DONE_RA3) { handled = 1; - saa_writel(SAA7134_IRQ_REPORT,report); + saa_writel(SAA7134_IRQ_REPORT, + SAA7134_IRQ_REPORT_DONE_RA3); saa7134_irq_alsa_done(dev, status); } else { goto out; diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index a499eea379e6..4fd187ac9d70 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -569,21 +569,22 @@ static irqreturn_t saa7134_irq(int irq, void *dev_id) for (loop = 0; loop < 10; loop++) { report = saa_readl(SAA7134_IRQ_REPORT); status = saa_readl(SAA7134_IRQ_STATUS); - if (0 == report) { - if (irq_debug > 1) - printk(KERN_DEBUG "%s/irq: no (more) work\n", - dev->name); - goto out; - } - - /* If dmasound support is active and we get a sound report, exit - and let the saa7134-alsa/oss module deal with it */ + /* If dmasound support is active and we get a sound report, + * mask out the report and let the saa7134-alsa module deal + * with it */ if ((report & SAA7134_IRQ_REPORT_DONE_RA3) && (dev->dmasound.priv_data != NULL) ) { if (irq_debug > 1) - printk(KERN_DEBUG "%s/irq: ignoring interrupt for DMA sound\n", + printk(KERN_DEBUG "%s/irq: preserving DMA sound interrupt\n", + dev->name); + report &= ~SAA7134_IRQ_REPORT_DONE_RA3; + } + + if (0 == report) { + if (irq_debug > 1) + printk(KERN_DEBUG "%s/irq: no (more) work\n", dev->name); goto out; } -- cgit v1.2.3-59-g8ed1b From 0b29669c065f60501e7289e1950fa2a618962358 Mon Sep 17 00:00:00 2001 From: Brandon Philips Date: Sat, 8 Dec 2007 23:05:53 -0300 Subject: V4L/DVB (6751): V4L: Memory leak! Fix count in videobuf-vmalloc mmap This is pretty serious bug. map->count is never initialized after the call to kmalloc making the count start at some random trash value. The end result is leaking videobufs. Also, fix up the debug statements to print unsigned values. Pushed to http://ifup.org/hg/v4l-dvb too Signed-off-by: Brandon Philips Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/videobuf-vmalloc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/videobuf-vmalloc.c b/drivers/media/video/videobuf-vmalloc.c index cd74341c984f..e01259438bb2 100644 --- a/drivers/media/video/videobuf-vmalloc.c +++ b/drivers/media/video/videobuf-vmalloc.c @@ -51,7 +51,7 @@ videobuf_vm_open(struct vm_area_struct *vma) { struct videobuf_mapping *map = vma->vm_private_data; - dprintk(2,"vm_open %p [count=%d,vma=%08lx-%08lx]\n",map, + dprintk(2,"vm_open %p [count=%u,vma=%08lx-%08lx]\n",map, map->count,vma->vm_start,vma->vm_end); map->count++; @@ -64,7 +64,7 @@ videobuf_vm_close(struct vm_area_struct *vma) struct videobuf_queue *q = map->q; int i; - dprintk(2,"vm_close %p [count=%d,vma=%08lx-%08lx]\n",map, + dprintk(2,"vm_close %p [count=%u,vma=%08lx-%08lx]\n",map, map->count,vma->vm_start,vma->vm_end); map->count--; @@ -221,7 +221,7 @@ static int __videobuf_mmap_mapper(struct videobuf_queue *q, } /* create mapping + update buffer list */ - map = q->bufs[first]->map = kmalloc(sizeof(struct videobuf_mapping),GFP_KERNEL); + map = q->bufs[first]->map = kzalloc(sizeof(struct videobuf_mapping),GFP_KERNEL); if (NULL == map) return -ENOMEM; -- cgit v1.2.3-59-g8ed1b From bc5483705ce08795ad64c3fb14aa7cee4847a2ea Mon Sep 17 00:00:00 2001 From: Benoit Istin Date: Fri, 7 Dec 2007 02:00:04 -0300 Subject: V4L/DVB (6746): saa7134-dvb: fix tuning for WinTV HVR-1110 There are several months my hvr1110 stop working. This is very simple to fix, for my card revision at least, by setting a missing field to the hauppauge_hvr_1110_config. Signed-off-by: Benoit Istin Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-dvb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 38d87332cc5d..e1ab099ec4c6 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -662,6 +662,7 @@ static struct tda1004x_config hauppauge_hvr_1110_config = { .if_freq = TDA10046_FREQ_045, .i2c_gate = 0x4b, .tuner_address = 0x61, + .tuner_config = 1, .request_firmware = philips_tda1004x_request_firmware }; -- cgit v1.2.3-59-g8ed1b From 8733e29748591ce04f7cf07fc9c177f63e7df6af Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 8 Dec 2007 09:34:37 -0300 Subject: V4L/DVB (6750): Fix in-kernel compilation for cxusb cxusb needs tuner-xc2028*.h files, but Makefile is not adding its patch drivers/media/dvb/dvb-usb/cxusb.c:33:26: error: tuner-xc2028.h: File not found drivers/media/dvb/dvb-usb/cxusb.c:34:32: error: tuner-xc2028-types.h: File not found Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/Makefile | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile index 73ac0a93fdeb..60a910052c16 100644 --- a/drivers/media/dvb/dvb-usb/Makefile +++ b/drivers/media/dvb/dvb-usb/Makefile @@ -62,3 +62,6 @@ dvb-usb-af9005-remote-objs = af9005-remote.o obj-$(CONFIG_DVB_USB_AF9005_REMOTE) += dvb-usb-af9005-remote.o EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ +# due to tuner-xc3028 +EXTRA_CFLAGS += -Idrivers/media/video + -- cgit v1.2.3-59-g8ed1b From f6b5cf771afcc96444cab44805e5a73e42f97db2 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Wed, 5 Dec 2007 15:14:19 -0300 Subject: V4L/DVB (6733): DVB: Compile 3000MC-specific DIB code only for CONFIG_DVB_DIB3000MC On Tue, 4 Dec 2007, Ingo Molnar wrote: > drivers/built-in.o: In function `dibusb_dib3000mc_tuner_attach': > : undefined reference to `dib3000mc_get_tuner_i2c_master' > drivers/built-in.o: In function `dibusb_dib3000mc_tuner_attach': > : undefined reference to `dib3000mc_set_config' Seems like -common part contains also code that is not completely common to all the modules. Signed-off-by: Jiri Kosina Tested-by: Ingo Molnar Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dibusb-common.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/dvb/dvb-usb/dibusb-common.c b/drivers/media/dvb/dvb-usb/dibusb-common.c index 9a184da01c47..b95b1eb1eba2 100644 --- a/drivers/media/dvb/dvb-usb/dibusb-common.c +++ b/drivers/media/dvb/dvb-usb/dibusb-common.c @@ -223,6 +223,7 @@ static struct dibx000_agc_config dib3000p_panasonic_agc_config = { .agc2_slope2 = 0x1e, }; +#ifdef CONFIG_DVB_DIB3000MC static struct dib3000mc_config mod3000p_dib3000p_config = { &dib3000p_panasonic_agc_config, @@ -305,6 +306,7 @@ int dibusb_dib3000mc_tuner_attach(struct dvb_usb_adapter *adap) return 0; } EXPORT_SYMBOL(dibusb_dib3000mc_tuner_attach); +#endif /* * common remote control stuff -- cgit v1.2.3-59-g8ed1b From 4a56087f3b7660c9824e9ec69b96ccf8d9b25d1c Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 11 Dec 2007 14:59:10 -0300 Subject: V4L/DVB (6794): Fix compilation when dib3000mc is compiled as a module As reported by Andrew Morton: > ERROR: "dibusb_dib3000mc_frontend_attach" [drivers/media/dvb/dvb-usb/dvb-usb-nova-t-usb2.ko] undefined! > ERROR: "dibusb_dib3000mc_tuner_attach" [drivers/media/dvb/dvb-usb/dvb-usb-nova-t-usb2.ko] undefined! > ERROR: "dibusb_dib3000mc_frontend_attach" [drivers/media/dvb/dvb-usb/dvb-usb-dibusb-mc.ko] undefined! > ERROR: "dibusb_dib3000mc_tuner_attach" [drivers/media/dvb/dvb-usb/dvb-usb-dibusb-mc.ko] undefined! > ERROR: "dibusb_dib3000mc_frontend_attach" [drivers/media/dvb/dvb-usb/dvb-usb-a800.ko] undefined! > ERROR: "dibusb_dib3000mc_tuner_attach" [drivers/media/dvb/dvb-usb/dvb-usb-a800.ko] undefined Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dibusb-common.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/dvb-usb/dibusb-common.c b/drivers/media/dvb/dvb-usb/dibusb-common.c index b95b1eb1eba2..8ee6cd4da9e7 100644 --- a/drivers/media/dvb/dvb-usb/dibusb-common.c +++ b/drivers/media/dvb/dvb-usb/dibusb-common.c @@ -223,7 +223,9 @@ static struct dibx000_agc_config dib3000p_panasonic_agc_config = { .agc2_slope2 = 0x1e, }; -#ifdef CONFIG_DVB_DIB3000MC +#if defined(CONFIG_DVB_DIB3000MC) || \ + (defined(CONFIG_DVB_DIB3000MC_MODULE) && defined(MODULE)) + static struct dib3000mc_config mod3000p_dib3000p_config = { &dib3000p_panasonic_agc_config, -- cgit v1.2.3-59-g8ed1b From 4584f520e1f773082ef44ff4f8969a5d992b16ec Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 11 Dec 2007 19:01:45 -0500 Subject: NFS: Fix NFS mountpoint crossing... The check that was added to nfs_xdev_get_sb() to work around broken servers, works fine for NFSv2, but causes mountpoint crossing on NFSv3 to always return ESTALE. Signed-off-by: Trond Myklebust --- fs/nfs/super.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/super.c b/fs/nfs/super.c index 2426e713b77f..ea929207f274 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -1475,7 +1475,7 @@ static int nfs_xdev_get_sb(struct file_system_type *fs_type, int flags, error = PTR_ERR(mntroot); goto error_splat_super; } - if (mntroot->d_inode->i_op != &nfs_dir_inode_operations) { + if (mntroot->d_inode->i_op != server->nfs_client->rpc_ops->dir_inode_ops) { dput(mntroot); error = -ESTALE; goto error_splat_super; -- cgit v1.2.3-59-g8ed1b From 056827a49ce65a8d10197d35468500b501d1eec1 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 11 Dec 2007 19:23:49 -0300 Subject: V4L/DVB (6796): ivtv/ section fix This patch fixes the following section mismatch with CONFIG_HOTPLUG=n: <-- snip --> ... ... <-- snip --> Signed-off-by: Adrian Bunk Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-i2c.c | 2 +- drivers/media/video/ivtv/ivtv-i2c.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c index 623eea2652ca..77b27dc750b1 100644 --- a/drivers/media/video/ivtv/ivtv-i2c.c +++ b/drivers/media/video/ivtv/ivtv-i2c.c @@ -706,7 +706,7 @@ void ivtv_call_i2c_clients(struct ivtv *itv, unsigned int cmd, void *arg) } /* init + register i2c algo-bit adapter */ -int __devinit init_ivtv_i2c(struct ivtv *itv) +int init_ivtv_i2c(struct ivtv *itv) { IVTV_DEBUG_I2C("i2c init\n"); diff --git a/drivers/media/video/ivtv/ivtv-i2c.h b/drivers/media/video/ivtv/ivtv-i2c.h index de6a07442298..987042c09b64 100644 --- a/drivers/media/video/ivtv/ivtv-i2c.h +++ b/drivers/media/video/ivtv/ivtv-i2c.h @@ -35,7 +35,7 @@ int ivtv_call_i2c_client(struct ivtv *itv, int addr, unsigned int cmd, void *arg void ivtv_call_i2c_clients(struct ivtv *itv, unsigned int cmd, void *arg); /* init + register i2c algo-bit adapter */ -int __devinit init_ivtv_i2c(struct ivtv *itv); +int init_ivtv_i2c(struct ivtv *itv); void exit_ivtv_i2c(struct ivtv *itv); #endif -- cgit v1.2.3-59-g8ed1b From 7d44e8921851f460bcacb3ade432a4f5ada20fb6 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 11 Dec 2007 19:23:43 -0300 Subject: V4L/DVB (6797): bt8xx/ section fixes This patch fixes the following section mismatch with CONFIG_HOTPLUG=n: <-- snip --> ... ... <-- snip --> Signed-off-by: Adrian Bunk Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bt8xx/bttv-cards.c | 2 +- drivers/media/video/bt8xx/bttv-driver.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index 3abd9fa54d2c..585d1ef95afd 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -5080,7 +5080,7 @@ static void PXC200_muxsel(struct bttv *btv, unsigned int input) /* ----------------------------------------------------------------------- */ /* motherboard chipset specific stuff */ -void __devinit bttv_check_chipset(void) +void __init bttv_check_chipset(void) { int pcipci_fail = 0; struct pci_dev *dev = NULL; diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 2182ef089ebf..c02d92deacd2 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -4985,7 +4985,7 @@ static struct pci_driver bttv_pci_driver = { #endif }; -static int bttv_init_module(void) +static int __init bttv_init_module(void) { int ret; @@ -5018,7 +5018,7 @@ static int bttv_init_module(void) return pci_register_driver(&bttv_pci_driver); } -static void bttv_cleanup_module(void) +static void __exit bttv_cleanup_module(void) { pci_unregister_driver(&bttv_pci_driver); bus_unregister(&bttv_sub_bus_type); -- cgit v1.2.3-59-g8ed1b From 5cef338b30c110daf547fb13d99f0c77f2a79fbc Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 11 Dec 2007 22:01:56 -0500 Subject: NFSv2/v3: Fix a memory leak when using -onolock Neil Brown said: > Hi Trond, > > We found that a machine which made moderately heavy use of > 'automount' was leaking some nfs data structures - particularly the > 4K allocated by rpc_alloc_iostats. > It turns out that this only happens with filesystems with -onolock > set. > The problem is that if NFS_MOUNT_NONLM is set, nfs_start_lockd doesn't > set server->destroy, so when the filesystem is unmounted, the > ->client_acl is not shutdown, and so several resources are still > held. Multiple mount/umount cycles will slowly eat away memory > several pages at a time. Signed-off-by: Trond Myklebust Acked-by: NeilBrown --- fs/nfs/client.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/nfs/client.c b/fs/nfs/client.c index 70587f383f10..a6f625497612 100644 --- a/fs/nfs/client.c +++ b/fs/nfs/client.c @@ -410,9 +410,6 @@ static int nfs_create_rpc_client(struct nfs_client *clp, int proto, */ static void nfs_destroy_server(struct nfs_server *server) { - if (!IS_ERR(server->client_acl)) - rpc_shutdown_client(server->client_acl); - if (!(server->flags & NFS_MOUNT_NONLM)) lockd_down(); /* release rpc.lockd */ } @@ -755,6 +752,9 @@ void nfs_free_server(struct nfs_server *server) if (server->destroy != NULL) server->destroy(server); + + if (!IS_ERR(server->client_acl)) + rpc_shutdown_client(server->client_acl); if (!IS_ERR(server->client)) rpc_shutdown_client(server->client); -- cgit v1.2.3-59-g8ed1b From 50e1092b3a119bb4660bb6bd2e1749dc2d8ac62e Mon Sep 17 00:00:00 2001 From: James Lentini Date: Mon, 10 Dec 2007 11:24:48 -0500 Subject: SUNRPC xprtrdma: fix XDR tail buf marshalling for all ops rpcrdma_convert_iovs is passed an xdr_buf representing either an RPC request or an RPC reply. In the case of a request, several calculations and tests involving pos are unnecessary. In the case of a reply, several calculations and tests involving pos are incorrect (the code tests pos against the reply xdr buf's len field, which is always 0 at the time rpcrdma_convert_iovs is executed). This change removes the incorrect/unnecessary calculations and tests involving pos. This fixes an observed problem when reading certain file sizes over NFS/RDMA. Signed-off-by: Tom Tucker Signed-off-by: Tom Talpey Signed-off-by: James Lentini Signed-off-by: Trond Myklebust --- net/sunrpc/xprtrdma/rpc_rdma.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/net/sunrpc/xprtrdma/rpc_rdma.c b/net/sunrpc/xprtrdma/rpc_rdma.c index 9e11ce715958..ee8de7af2a5b 100644 --- a/net/sunrpc/xprtrdma/rpc_rdma.c +++ b/net/sunrpc/xprtrdma/rpc_rdma.c @@ -92,7 +92,6 @@ rpcrdma_convert_iovs(struct xdr_buf *xdrbuf, int pos, seg[n].mr_page = NULL; seg[n].mr_offset = xdrbuf->head[0].iov_base; seg[n].mr_len = xdrbuf->head[0].iov_len; - pos += xdrbuf->head[0].iov_len; ++n; } @@ -104,7 +103,6 @@ rpcrdma_convert_iovs(struct xdr_buf *xdrbuf, int pos, seg[n].mr_len = min_t(u32, PAGE_SIZE - xdrbuf->page_base, xdrbuf->page_len); len = xdrbuf->page_len - seg[n].mr_len; - pos += len; ++n; p = 1; while (len > 0) { @@ -119,20 +117,15 @@ rpcrdma_convert_iovs(struct xdr_buf *xdrbuf, int pos, } } - if (pos < xdrbuf->len && xdrbuf->tail[0].iov_len) { + if (xdrbuf->tail[0].iov_len) { if (n == nsegs) return 0; seg[n].mr_page = NULL; seg[n].mr_offset = xdrbuf->tail[0].iov_base; seg[n].mr_len = xdrbuf->tail[0].iov_len; - pos += xdrbuf->tail[0].iov_len; ++n; } - if (pos < xdrbuf->len) - dprintk("RPC: %s: marshaled only %d of %d\n", - __func__, pos, xdrbuf->len); - return n; } -- cgit v1.2.3-59-g8ed1b From 4af75653031c6d454b4ace47c1536f0d2e727e3e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 11 Dec 2007 19:28:36 -0800 Subject: Revert "make bnx2x select ZLIB_INFLATE" This reverts commit 70eba18b5664f90d7620905e005b89388e5fd94b, as per Jeff Garzik: "That was meant for 2.6.25, and actually (due to patching) applied to a completely unrelated 2.6.24 net driver." Noted-by: Roland Dreier Requested-by: Jeff Garzik Signed-off-by: Linus Torvalds --- drivers/net/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 6cde4edc846b..d9107e542dfa 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2588,7 +2588,6 @@ config MLX4_DEBUG config TEHUTI tristate "Tehuti Networks 10G Ethernet" depends on PCI - select ZLIB_INFLATE help Tehuti Networks 10G Ethernet NIC -- cgit v1.2.3-59-g8ed1b From 19fb1457990b6b7e15586ec7331541a184233acc Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 15 Nov 2007 23:09:30 -0300 Subject: V4L/DVB (6609): Re-adds lock safe videobuf_read_start videobuf_dvb needs videobuf_read_start. The EXPORT_SYMBOL_GPL() were removed by a previous patch. However, videobuf_dvb needs this. This patch re-adds videobuf_read_start, doing the proper lock. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/videobuf-core.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/videobuf-core.c b/drivers/media/video/videobuf-core.c index de2f56b19163..81f77d2b4bd3 100644 --- a/drivers/media/video/videobuf-core.c +++ b/drivers/media/video/videobuf-core.c @@ -806,7 +806,7 @@ ssize_t videobuf_read_one(struct videobuf_queue *q, } /* Locking: Caller holds q->lock */ -int videobuf_read_start(struct videobuf_queue *q) +int __videobuf_read_start(struct videobuf_queue *q) { enum v4l2_field field; unsigned long flags=0; @@ -862,6 +862,17 @@ static void __videobuf_read_stop(struct videobuf_queue *q) } +int videobuf_read_start(struct videobuf_queue *q) +{ + int rc; + + mutex_lock(&q->lock); + rc = __videobuf_read_start(q); + mutex_unlock(&q->lock); + + return rc; +} + void videobuf_read_stop(struct videobuf_queue *q) { mutex_lock(&q->lock); @@ -1058,6 +1069,7 @@ EXPORT_SYMBOL_GPL(videobuf_dqbuf); EXPORT_SYMBOL_GPL(videobuf_streamon); EXPORT_SYMBOL_GPL(videobuf_streamoff); +EXPORT_SYMBOL_GPL(videobuf_read_start); EXPORT_SYMBOL_GPL(videobuf_read_stop); EXPORT_SYMBOL_GPL(videobuf_stop); EXPORT_SYMBOL_GPL(videobuf_read_stream); -- cgit v1.2.3-59-g8ed1b From 45ccc6c50dfd227b40122fea649b5fc887caa174 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 12 Dec 2007 13:45:24 +0100 Subject: i2c: Delete an outdated piece of documentation I'm amazed that this old piece of documentation managed to survive until today. Signed-off-by: Jean Delvare --- Documentation/i2c/summary | 45 ++++----------------------------------------- 1 file changed, 4 insertions(+), 41 deletions(-) diff --git a/Documentation/i2c/summary b/Documentation/i2c/summary index 003c7319b8c7..13ab076dcd92 100644 --- a/Documentation/i2c/summary +++ b/Documentation/i2c/summary @@ -1,5 +1,3 @@ -This is an explanation of what i2c is, and what is supported in this package. - I2C and SMBus ============= @@ -33,52 +31,17 @@ When we talk about I2C, we use the following terms: Client An Algorithm driver contains general code that can be used for a whole class -of I2C adapters. Each specific adapter driver depends on one algorithm -driver. +of I2C adapters. Each specific adapter driver either depends on one algorithm +driver, or includes its own implementation. A Driver driver (yes, this sounds ridiculous, sorry) contains the general code to access some type of device. Each detected device gets its own data in the Client structure. Usually, Driver and Client are more closely integrated than Algorithm and Adapter. -For a given configuration, you will need a driver for your I2C bus (usually -a separate Adapter and Algorithm driver), and drivers for your I2C devices -(usually one driver for each device). There are no I2C device drivers -in this package. See the lm_sensors project http://www.lm-sensors.nu -for device drivers. +For a given configuration, you will need a driver for your I2C bus, and +drivers for your I2C devices (usually one driver for each device). At this time, Linux only operates I2C (or SMBus) in master mode; you can't use these APIs to make a Linux system behave as a slave/device, either to speak a custom protocol or to emulate some other device. - - -Included Bus Drivers -==================== -Note that only stable drivers are patched into the kernel by 'mkpatch'. - - -Base modules ------------- - -i2c-core: The basic I2C code, including the /proc/bus/i2c* interface -i2c-dev: The /dev/i2c-* interface -i2c-proc: The /proc/sys/dev/sensors interface for device (client) drivers - -Algorithm drivers ------------------ - -i2c-algo-bit: A bit-banging algorithm -i2c-algo-pcf: A PCF 8584 style algorithm -i2c-algo-ibm_ocp: An algorithm for the I2C device in IBM 4xx processors (NOT BUILT BY DEFAULT) - -Adapter drivers ---------------- - -i2c-elektor: Elektor ISA card (uses i2c-algo-pcf) -i2c-elv: ELV parallel port adapter (uses i2c-algo-bit) -i2c-pcf-epp: PCF8584 on a EPP parallel port (uses i2c-algo-pcf) (NOT mkpatched) -i2c-philips-par: Philips style parallel port adapter (uses i2c-algo-bit) -i2c-adap-ibm_ocp: IBM 4xx processor I2C device (uses i2c-algo-ibm_ocp) (NOT BUILT BY DEFAULT) -i2c-pport: Primitive parallel port adapter (uses i2c-algo-bit) -i2c-velleman: Velleman K8000 parallel port adapter (uses i2c-algo-bit) - -- cgit v1.2.3-59-g8ed1b From 50862d9490e8fbb317040b3faeee7caf56c00025 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Wed, 12 Dec 2007 13:45:24 +0100 Subject: i2c-gpio: Initialize adapter class This is required to let hwmon drivers attach to the adapter. Signed-off-by: Atsushi Nemoto Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-gpio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index 44e1cd21bb01..3ca19fc234fb 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -140,6 +140,7 @@ static int __init i2c_gpio_probe(struct platform_device *pdev) adap->owner = THIS_MODULE; snprintf(adap->name, sizeof(adap->name), "i2c-gpio%d", pdev->id); adap->algo_data = bit_data; + adap->class = I2C_CLASS_HWMON; adap->dev.parent = &pdev->dev; /* -- cgit v1.2.3-59-g8ed1b From fce3ff03311e0397e2867cce67d4ccf31707a1ea Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 12 Dec 2007 13:45:24 +0100 Subject: i2c: Add missing spaces in split log messages Signed-off-by: Joe Perches Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-davinci.c | 4 ++-- drivers/i2c/busses/i2c-omap.c | 6 +++--- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index bd7aaff35240..67679882ebef 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -404,7 +404,7 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id) DAVINCI_I2C_STR_REG, w); } else - dev_err(dev->dev, "RDR IRQ while no" + dev_err(dev->dev, "RDR IRQ while no " "data requested\n"); break; @@ -423,7 +423,7 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id) DAVINCI_I2C_IMR_REG, w); } else - dev_err(dev->dev, "TDR IRQ while no data to" + dev_err(dev->dev, "TDR IRQ while no data to " "send\n"); break; diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 89a30028ddb6..cb55cf2ba1e9 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -203,7 +203,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) while (!(omap_i2c_read_reg(dev, OMAP_I2C_SYSS_REG) & OMAP_I2C_SYSS_RDONE)) { if (time_after(jiffies, timeout)) { - dev_warn(dev->dev, "timeout waiting" + dev_warn(dev->dev, "timeout waiting " "for controller reset\n"); return -ETIMEDOUT; } @@ -483,7 +483,7 @@ omap_i2c_isr(int this_irq, void *dev_id) dev->buf_len--; } } else - dev_err(dev->dev, "RRDY IRQ while no data" + dev_err(dev->dev, "RRDY IRQ while no data " "requested\n"); omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RRDY); continue; @@ -498,7 +498,7 @@ omap_i2c_isr(int this_irq, void *dev_id) dev->buf_len--; } } else - dev_err(dev->dev, "XRDY IRQ while no" + dev_err(dev->dev, "XRDY IRQ while no " "data to send\n"); omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w); omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XRDY); -- cgit v1.2.3-59-g8ed1b From 187426e69afe0a2ad697c9c5f5f654254da0e3a0 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 12 Dec 2007 13:45:25 +0100 Subject: i2c/isp1301_omap: Build fix Build fix to the isp1301_omap driver ... this driver gets built more often in the OMAP tree than in mainline, partly because the defconfig for H2 (plus probably H3 and H4) needs updating. Signed-off-by: David Brownell Signed-off-by: Jean Delvare --- drivers/i2c/chips/isp1301_omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c index fe04e46991aa..b767603a07ba 100644 --- a/drivers/i2c/chips/isp1301_omap.c +++ b/drivers/i2c/chips/isp1301_omap.c @@ -26,7 +26,7 @@ #include #include #include -#include +#include #include #include #include -- cgit v1.2.3-59-g8ed1b From 58d784a5c754cd66ecd4791222162504d3c16c74 Mon Sep 17 00:00:00 2001 From: Martin Habets Date: Tue, 11 Dec 2007 03:37:04 -0800 Subject: [SERIAL] sparc: Infrastructure to fix section mismatch bugs. This patch against 2.6.23 sparc-2.6.git contains a number of minor cleanups of the sparc serial drivers. Initially I fixed this build warning: WARNING: vmlinux.o(.text+0x107a2c): Section mismatch: reference to .init.text:add_preferred_console (between 'sunserial_console_match' and 'sunserial_console_termios') which is done by declaring sunserial_console_match() as __init. This resulted in build warnings on sunserial_current_minor. To resolve these the variable was changed so it is no longer global, and to hide operations on it inside 2 new functions. These functions handle the UART minor handling code that is common to all sparc serial drivers. These changes allowed to clean up the uart counters in all the sparc serial drivers, and the administration of minor device numbers. Lastly, sunserial_console_termios() does not need to be exported since it is only called from non-modular code. Sadly, the following build warning still exists: WARNING: vmlinux.o(__ksymtab+0x2910): Section mismatch: reference to .init.text:sunserial_console_match (between '__ksymtab_sunserial_console_match' and '__ksymtab_sunserial_unregister_minors') This could be resolved by not exporting sunserial_console_match(), but this is not possible at the moment because it is being called from modular code. On the other hand, this is a bogus warning since it comes from a ksymtab section. Signed-off-by: Martin Habets Signed-off-by: David S. Miller --- drivers/serial/suncore.c | 33 ++++++++++++++++++++++++++++----- drivers/serial/suncore.h | 3 ++- drivers/serial/sunhv.c | 14 +++----------- drivers/serial/sunsab.c | 16 ++++------------ drivers/serial/sunsu.c | 16 +++++----------- drivers/serial/sunzilog.c | 41 ++++++++++++++++------------------------- 6 files changed, 58 insertions(+), 65 deletions(-) diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c index 70a09a3d5af0..707c5b03bce9 100644 --- a/drivers/serial/suncore.c +++ b/drivers/serial/suncore.c @@ -23,11 +23,36 @@ #include "suncore.h" -int sunserial_current_minor = 64; +static int sunserial_current_minor = 64; -EXPORT_SYMBOL(sunserial_current_minor); +int sunserial_register_minors(struct uart_driver *drv, int count) +{ + int err = 0; + + drv->minor = sunserial_current_minor; + drv->nr += count; + /* Register the driver on the first call */ + if (drv->nr == count) + err = uart_register_driver(drv); + if (err == 0) { + sunserial_current_minor += count; + drv->tty_driver->name_base = drv->minor - 64; + } + return err; +} +EXPORT_SYMBOL(sunserial_register_minors); + +void sunserial_unregister_minors(struct uart_driver *drv, int count) +{ + drv->nr -= count; + sunserial_current_minor -= count; + + if (drv->nr == 0) + uart_unregister_driver(drv); +} +EXPORT_SYMBOL(sunserial_unregister_minors); -int sunserial_console_match(struct console *con, struct device_node *dp, +int __init sunserial_console_match(struct console *con, struct device_node *dp, struct uart_driver *drv, int line) { int off; @@ -133,8 +158,6 @@ sunserial_console_termios(struct console *con) con->cflag = cflag; } -EXPORT_SYMBOL(sunserial_console_termios); - /* Sun serial MOUSE auto baud rate detection. */ static struct mouse_baud_cflag { int baud; diff --git a/drivers/serial/suncore.h b/drivers/serial/suncore.h index 829d7d65d6db..042668aa602e 100644 --- a/drivers/serial/suncore.h +++ b/drivers/serial/suncore.h @@ -22,7 +22,8 @@ extern unsigned int suncore_mouse_baud_cflag_next(unsigned int, int *); extern int suncore_mouse_baud_detection(unsigned char, int); -extern int sunserial_current_minor; +extern int sunserial_register_minors(struct uart_driver *, int); +extern void sunserial_unregister_minors(struct uart_driver *, int); extern int sunserial_console_match(struct console *, struct device_node *, struct uart_driver *, int); diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c index 8ff900b09811..be0fe152891b 100644 --- a/drivers/serial/sunhv.c +++ b/drivers/serial/sunhv.c @@ -562,16 +562,10 @@ static int __devinit hv_probe(struct of_device *op, const struct of_device_id *m port->dev = &op->dev; - sunhv_reg.minor = sunserial_current_minor; - sunhv_reg.nr = 1; - - err = uart_register_driver(&sunhv_reg); + err = sunserial_register_minors(&sunhv_reg, 1); if (err) goto out_free_con_read_page; - sunhv_reg.tty_driver->name_base = sunhv_reg.minor - 64; - sunserial_current_minor += 1; - sunserial_console_match(&sunhv_console, op->node, &sunhv_reg, port->line); @@ -591,8 +585,7 @@ out_remove_port: uart_remove_one_port(&sunhv_reg, port); out_unregister_driver: - sunserial_current_minor -= 1; - uart_unregister_driver(&sunhv_reg); + sunserial_unregister_minors(&sunhv_reg, 1); out_free_con_read_page: kfree(con_read_page); @@ -614,8 +607,7 @@ static int __devexit hv_remove(struct of_device *dev) uart_remove_one_port(&sunhv_reg, port); - sunserial_current_minor -= 1; - uart_unregister_driver(&sunhv_reg); + sunserial_unregister_minors(&sunhv_reg, 1); kfree(port); sunhv_port = NULL; diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index ff610c23314b..543f93741e6f 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -832,7 +832,6 @@ static struct uart_driver sunsab_reg = { }; static struct uart_sunsab_port *sunsab_ports; -static int num_channels; #ifdef CONFIG_SERIAL_SUNSAB_CONSOLE @@ -1102,8 +1101,8 @@ static int __init sunsab_init(void) { struct device_node *dp; int err; + int num_channels = 0; - num_channels = 0; for_each_node_by_name(dp, "se") num_channels += 2; for_each_node_by_name(dp, "serial") { @@ -1117,20 +1116,14 @@ static int __init sunsab_init(void) if (!sunsab_ports) return -ENOMEM; - sunsab_reg.minor = sunserial_current_minor; - sunsab_reg.nr = num_channels; sunsab_reg.cons = SUNSAB_CONSOLE(); - - err = uart_register_driver(&sunsab_reg); + err = sunserial_register_minors(&sunsab_reg, num_channels); if (err) { kfree(sunsab_ports); sunsab_ports = NULL; return err; } - - sunsab_reg.tty_driver->name_base = sunsab_reg.minor - 64; - sunserial_current_minor += num_channels; } return of_register_driver(&sab_driver, &of_bus_type); @@ -1139,9 +1132,8 @@ static int __init sunsab_init(void) static void __exit sunsab_exit(void) { of_unregister_driver(&sab_driver); - if (num_channels) { - sunserial_current_minor -= num_channels; - uart_unregister_driver(&sunsab_reg); + if (sunsab_reg.nr) { + sunserial_unregister_minors(&sunsab_reg, sunsab_reg.nr); } kfree(sunsab_ports); diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index e074943feff5..4e2302d43ab1 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -1528,14 +1528,12 @@ static struct of_platform_driver su_driver = { .remove = __devexit_p(su_remove), }; -static int num_uart; - static int __init sunsu_init(void) { struct device_node *dp; int err; + int num_uart = 0; - num_uart = 0; for_each_node_by_name(dp, "su") { if (su_get_type(dp) == SU_PORT_PORT) num_uart++; @@ -1552,26 +1550,22 @@ static int __init sunsu_init(void) } if (num_uart) { - sunsu_reg.minor = sunserial_current_minor; - sunsu_reg.nr = num_uart; - err = uart_register_driver(&sunsu_reg); + err = sunserial_register_minors(&sunsu_reg, num_uart); if (err) return err; - sunsu_reg.tty_driver->name_base = sunsu_reg.minor - 64; - sunserial_current_minor += num_uart; } err = of_register_driver(&su_driver, &of_bus_type); if (err && num_uart) - uart_unregister_driver(&sunsu_reg); + sunserial_unregister_minors(&sunsu_reg, num_uart); return err; } static void __exit sunsu_exit(void) { - if (num_uart) - uart_unregister_driver(&sunsu_reg); + if (sunsu_reg.nr) + sunserial_unregister_minors(&sunsu_reg, sunsu_reg.nr); } module_init(sunsu_init); diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c index 283bef0d24cb..cb2e40506379 100644 --- a/drivers/serial/sunzilog.c +++ b/drivers/serial/sunzilog.c @@ -63,10 +63,6 @@ readb(&((__channel)->control)) #endif -static int num_sunzilog; -#define NUM_SUNZILOG num_sunzilog -#define NUM_CHANNELS (NUM_SUNZILOG * 2) - #define ZS_CLOCK 4915200 /* Zilog input clock rate. */ #define ZS_CLOCK_DIVISOR 16 /* Divisor this driver uses. */ @@ -1031,18 +1027,19 @@ static struct uart_driver sunzilog_reg = { .major = TTY_MAJOR, }; -static int __init sunzilog_alloc_tables(void) +static int __init sunzilog_alloc_tables(int num_sunzilog) { struct uart_sunzilog_port *up; unsigned long size; + int num_channels = num_sunzilog * 2; int i; - size = NUM_CHANNELS * sizeof(struct uart_sunzilog_port); + size = num_channels * sizeof(struct uart_sunzilog_port); sunzilog_port_table = kzalloc(size, GFP_KERNEL); if (!sunzilog_port_table) return -ENOMEM; - for (i = 0; i < NUM_CHANNELS; i++) { + for (i = 0; i < num_channels; i++) { up = &sunzilog_port_table[i]; spin_lock_init(&up->port.lock); @@ -1050,13 +1047,13 @@ static int __init sunzilog_alloc_tables(void) if (i == 0) sunzilog_irq_chain = up; - if (i < NUM_CHANNELS - 1) + if (i < num_channels - 1) up->next = up + 1; else up->next = NULL; } - size = NUM_SUNZILOG * sizeof(struct zilog_layout __iomem *); + size = num_sunzilog * sizeof(struct zilog_layout __iomem *); sunzilog_chip_regs = kzalloc(size, GFP_KERNEL); if (!sunzilog_chip_regs) { kfree(sunzilog_port_table); @@ -1496,34 +1493,28 @@ static int __init sunzilog_init(void) struct device_node *dp; int err, uart_count; int num_keybms; + int num_sunzilog = 0; - NUM_SUNZILOG = 0; num_keybms = 0; for_each_node_by_name(dp, "zs") { - NUM_SUNZILOG++; + num_sunzilog++; if (of_find_property(dp, "keyboard", NULL)) num_keybms++; } uart_count = 0; - if (NUM_SUNZILOG) { + if (num_sunzilog) { int uart_count; - err = sunzilog_alloc_tables(); + err = sunzilog_alloc_tables(num_sunzilog); if (err) goto out; - uart_count = (NUM_SUNZILOG * 2) - (2 * num_keybms); + uart_count = (num_sunzilog * 2) - (2 * num_keybms); - sunzilog_reg.nr = uart_count; - sunzilog_reg.minor = sunserial_current_minor; - err = uart_register_driver(&sunzilog_reg); + err = sunserial_register_minors(&sunzilog_reg, uart_count); if (err) goto out_free_tables; - - sunzilog_reg.tty_driver->name_base = sunzilog_reg.minor - 64; - - sunserial_current_minor += uart_count; } err = of_register_driver(&zs_driver, &of_bus_type); @@ -1557,8 +1548,8 @@ out_unregister_driver: of_unregister_driver(&zs_driver); out_unregister_uart: - if (NUM_SUNZILOG) { - uart_unregister_driver(&sunzilog_reg); + if (num_sunzilog) { + sunserial_unregister_minors(&sunzilog_reg, num_sunzilog); sunzilog_reg.cons = NULL; } @@ -1590,8 +1581,8 @@ static void __exit sunzilog_exit(void) zilog_irq = -1; } - if (NUM_SUNZILOG) { - uart_unregister_driver(&sunzilog_reg); + if (sunzilog_reg.nr) { + sunserial_unregister_minors(&sunzilog_reg, sunzilog_reg.nr); sunzilog_free_tables(); } } -- cgit v1.2.3-59-g8ed1b From 0de56d1ab83323d604d95ca193dcbd28388dbabb Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 12 Dec 2007 07:31:46 -0800 Subject: [SPARC64]: Fix endless loop in cheetah_xcall_deliver(). We need to mask out the proper bits when testing the dispatch status register else we can see unrelated NACK bits from previous cross call sends. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 894b506f9636..c39944927f1a 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -476,7 +476,7 @@ static inline void spitfire_xcall_deliver(u64 data0, u64 data1, u64 data2, cpuma */ static void cheetah_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask) { - u64 pstate, ver; + u64 pstate, ver, busy_mask; int nack_busy_id, is_jbus, need_more; if (cpus_empty(mask)) @@ -508,14 +508,20 @@ retry: "i" (ASI_INTR_W)); nack_busy_id = 0; + busy_mask = 0; { int i; for_each_cpu_mask(i, mask) { u64 target = (i << 14) | 0x70; - if (!is_jbus) + if (is_jbus) { + busy_mask |= (0x1UL << (i * 2)); + } else { target |= (nack_busy_id << 24); + busy_mask |= (0x1UL << + (nack_busy_id * 2)); + } __asm__ __volatile__( "stxa %%g0, [%0] %1\n\t" "membar #Sync\n\t" @@ -531,15 +537,16 @@ retry: /* Now, poll for completion. */ { - u64 dispatch_stat; + u64 dispatch_stat, nack_mask; long stuck; stuck = 100000 * nack_busy_id; + nack_mask = busy_mask << 1; do { __asm__ __volatile__("ldxa [%%g0] %1, %0" : "=r" (dispatch_stat) : "i" (ASI_INTR_DISPATCH_STAT)); - if (dispatch_stat == 0UL) { + if (!(dispatch_stat & (busy_mask | nack_mask))) { __asm__ __volatile__("wrpr %0, 0x0, %%pstate" : : "r" (pstate)); if (unlikely(need_more)) { @@ -556,12 +563,12 @@ retry: } if (!--stuck) break; - } while (dispatch_stat & 0x5555555555555555UL); + } while (dispatch_stat & busy_mask); __asm__ __volatile__("wrpr %0, 0x0, %%pstate" : : "r" (pstate)); - if ((dispatch_stat & ~(0x5555555555555555UL)) == 0) { + if (dispatch_stat & busy_mask) { /* Busy bits will not clear, continue instead * of freezing up on this cpu. */ -- cgit v1.2.3-59-g8ed1b From a5576cfa5cd8d8aa874bd4ee500dc8a2e7cbad18 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 12 Dec 2007 11:08:33 -0500 Subject: Revert "NFS: Ensure we return zero if applications attempt to write zero bytes" This reverts commit b9148c6b80d802dbc2a7530b29915a80432e50c7. On Wed, 12 Dec 2007 10:57:30 -0500, Chuck Lever wrote > commit b9148c6b should be reverted. It was recently forward-ported > from some years-old patches, and is clearly not needed now. > > On Dec 11, 2007, at 5:21 PM, Adrian Bunk wrote: > >> This code became dead after commit >> b9148c6b80d802dbc2a7530b29915a80432e50c7 >> (which BTW doesn't seem to have changed any behaviour) and can >> therefore >> be removed. >> >> Spotted by the Coverity checker. >> >> Signed-off-by: Adrian Bunk >> >> --- >> --- linux-2.6/fs/nfs/direct.c.old 2007-12-02 21:54:53.000000000 +0100 >> +++ linux-2.6/fs/nfs/direct.c 2007-12-02 21:55:10.000000000 +0100 >> @@ -897,15 +897,12 @@ ssize_t nfs_file_direct_write(struct kio >> if (!count) >> goto out; /* return 0 */ >> >> retval = -EINVAL; >> if ((ssize_t) count < 0) >> goto out; >> - retval = 0; >> - if (!count) >> - goto out; >> >> retval = nfs_sync_mapping(mapping); >> if (retval) >> goto out; >> >> retval = nfs_direct_write(iocb, iov, nr_segs, pos, count); >> Signed-off-by: Trond Myklebust --- fs/nfs/direct.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c index 5e8d82f6666b..3c9d16b4f80c 100644 --- a/fs/nfs/direct.c +++ b/fs/nfs/direct.c @@ -894,8 +894,6 @@ ssize_t nfs_file_direct_write(struct kiocb *iocb, const struct iovec *iov, retval = generic_write_checks(file, &pos, &count, 0); if (retval) goto out; - if (!count) - goto out; /* return 0 */ retval = -EINVAL; if ((ssize_t) count < 0) -- cgit v1.2.3-59-g8ed1b From a10db50a4ae813fcb2f431f2fb039933c109a925 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 12 Dec 2007 11:12:15 -0500 Subject: NFS: Fix an Oops in NFS unmount Ensure that the dummy 'root dentry' is invisible to d_find_alias(). If not, then it may be spliced into the tree if a parent directory from the same filesystem gets mounted at a later time. Signed-off-by: Trond Myklebust --- fs/nfs/getroot.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/fs/nfs/getroot.c b/fs/nfs/getroot.c index 0ee43843f4ec..e6242cdbaf91 100644 --- a/fs/nfs/getroot.c +++ b/fs/nfs/getroot.c @@ -57,6 +57,17 @@ static int nfs_superblock_set_dummy_root(struct super_block *sb, struct inode *i } /* Circumvent igrab(): we know the inode is not being freed */ atomic_inc(&inode->i_count); + /* + * Ensure that this dentry is invisible to d_find_alias(). + * Otherwise, it may be spliced into the tree by + * d_materialise_unique if a parent directory from the same + * filesystem gets mounted at a later time. + * This again causes shrink_dcache_for_umount_subtree() to + * Oops, since the test for IS_ROOT() will fail. + */ + spin_lock(&dcache_lock); + list_del_init(&sb->s_root->d_alias); + spin_unlock(&dcache_lock); } return 0; } -- cgit v1.2.3-59-g8ed1b From dc93441b3f5879a096dd117a81df541b0855ebbb Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Sun, 2 Dec 2007 19:45:19 +0100 Subject: sdhci: describe quirks Add a comment for each quirk to describe what it does and why. Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index ff59d2e0475b..17b4e391db35 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -26,12 +26,22 @@ static unsigned int debug_quirks = 0; +/* + * Different quirks to handle when the hardware deviates from a strict + * interpretation of the SDHCI specification. + */ + +/* Controller doesn't honor resets unless we touch the clock register */ #define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0) +/* Controller has bad caps bits, but really supports DMA */ #define SDHCI_QUIRK_FORCE_DMA (1<<1) /* Controller doesn't like some resets when there is no card inserted. */ #define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2) +/* Controller doesn't like clearing the power reg before a change */ #define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3) +/* Controller has flaky internal state so reset it on each ios change */ #define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4) +/* Controller has an unusable DMA engine */ #define SDHCI_QUIRK_BROKEN_DMA (1<<5) static const struct pci_device_id pci_ids[] __devinitdata = { -- cgit v1.2.3-59-g8ed1b From c6573c94670882079174e2ea0da4abf1a0da51fe Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Sun, 2 Dec 2007 19:46:49 +0100 Subject: sdhci: don't warn about sdhci 2.0 controllers We support 2.0 controllers, even though we don't use anything in the new feature set. Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 17b4e391db35..758a7417eb50 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1294,7 +1294,7 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) version = readw(host->ioaddr + SDHCI_HOST_VERSION); version = (version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT; - if (version != 0) { + if (version > 1) { printk(KERN_ERR "%s: Unknown controller version (%d). " "You may experience problems.\n", host->slot_descr, version); -- cgit v1.2.3-59-g8ed1b From c9fddbc4f844f5a16b5957c61fe2cfcb5c12f990 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Sun, 2 Dec 2007 19:52:11 +0100 Subject: sdhci: use PIO when DMA can't satisfy the request Some controllers have been designed on the assumption that all transfers will be 32-bit aligned, both in start address and in size. This is not a guarantee the SDHCI specification provides and not one we can provide. Revert back to PIO for individual requests in order to work around the hardware bug. Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci.c | 32 +++++++++++++++++++++++++++++--- drivers/mmc/host/sdhci.h | 3 ++- 2 files changed, 31 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 758a7417eb50..a5300f238d98 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -43,6 +43,10 @@ static unsigned int debug_quirks = 0; #define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4) /* Controller has an unusable DMA engine */ #define SDHCI_QUIRK_BROKEN_DMA (1<<5) +/* Controller can only DMA from 32-bit aligned addresses */ +#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<6) +/* Controller can only DMA chunk sizes that are a multiple of 32 bits */ +#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<7) static const struct pci_device_id pci_ids[] __devinitdata = { { @@ -429,7 +433,29 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) writeb(count, host->ioaddr + SDHCI_TIMEOUT_CONTROL); - if (host->flags & SDHCI_USE_DMA) { + if (host->flags & SDHCI_USE_DMA) + host->flags |= SDHCI_REQ_USE_DMA; + + if (unlikely((host->flags & SDHCI_REQ_USE_DMA) && + (host->chip->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE) && + ((data->blksz * data->blocks) & 0x3))) { + DBG("Reverting to PIO because of transfer size (%d)\n", + data->blksz * data->blocks); + host->flags &= ~SDHCI_REQ_USE_DMA; + } + + /* + * The assumption here being that alignment is the same after + * translation to device address space. + */ + if (unlikely((host->flags & SDHCI_REQ_USE_DMA) && + (host->chip->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) && + (data->sg->offset & 0x3))) { + DBG("Reverting to PIO because of bad alignment\n"); + host->flags &= ~SDHCI_REQ_USE_DMA; + } + + if (host->flags & SDHCI_REQ_USE_DMA) { int count; count = pci_map_sg(host->chip->pdev, data->sg, data->sg_len, @@ -466,7 +492,7 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host, mode |= SDHCI_TRNS_MULTI; if (data->flags & MMC_DATA_READ) mode |= SDHCI_TRNS_READ; - if (host->flags & SDHCI_USE_DMA) + if (host->flags & SDHCI_REQ_USE_DMA) mode |= SDHCI_TRNS_DMA; writew(mode, host->ioaddr + SDHCI_TRANSFER_MODE); @@ -482,7 +508,7 @@ static void sdhci_finish_data(struct sdhci_host *host) data = host->data; host->data = NULL; - if (host->flags & SDHCI_USE_DMA) { + if (host->flags & SDHCI_REQ_USE_DMA) { pci_unmap_sg(host->chip->pdev, data->sg, data->sg_len, (data->flags & MMC_DATA_READ)?PCI_DMA_FROMDEVICE:PCI_DMA_TODEVICE); } diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 05195ea900f4..e4d77b038bfa 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -171,7 +171,8 @@ struct sdhci_host { spinlock_t lock; /* Mutex */ int flags; /* Host attributes */ -#define SDHCI_USE_DMA (1<<0) +#define SDHCI_USE_DMA (1<<0) /* Host is DMA capable */ +#define SDHCI_REQ_USE_DMA (1<<1) /* Use DMA for this req. */ unsigned int max_clk; /* Max possible freq (MHz) */ unsigned int timeout_clk; /* Timeout freq (KHz) */ -- cgit v1.2.3-59-g8ed1b From 84c46a53fc4ea4ff36df783a20187b2f65dd21cc Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Sun, 2 Dec 2007 19:58:16 +0100 Subject: sdhci: support JMicron JMB38x chips The JMicron JMB38x chip doesn't support transfers that aren't 32-bit aligned (both size and start address). It also doesn't like switching between PIO and DMA mode, so it needs to be reset after each request. Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci.c | 19 ++++++++++++++++++- include/linux/pci_ids.h | 1 + 2 files changed, 19 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index a5300f238d98..785bbdcf4a58 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -7,6 +7,10 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or (at * your option) any later version. + * + * Thanks to the following companies for their support: + * + * - JMicron (hardware and technical support) */ #include @@ -47,6 +51,8 @@ static unsigned int debug_quirks = 0; #define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<6) /* Controller can only DMA chunk sizes that are a multiple of 32 bits */ #define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<7) +/* Controller needs to be reset after each request to stay stable */ +#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<8) static const struct pci_device_id pci_ids[] __devinitdata = { { @@ -111,6 +117,16 @@ static const struct pci_device_id pci_ids[] __devinitdata = { SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS, }, + { + .vendor = PCI_VENDOR_ID_JMICRON, + .device = PCI_DEVICE_ID_JMICRON_JMB38X_SD, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = SDHCI_QUIRK_32BIT_DMA_ADDR | + SDHCI_QUIRK_32BIT_DMA_SIZE | + SDHCI_QUIRK_RESET_AFTER_REQUEST, + }, + { /* Generic SD host controller */ PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00) }, @@ -922,7 +938,8 @@ static void sdhci_tasklet_finish(unsigned long param) */ if (mrq->cmd->error || (mrq->data && (mrq->data->error || - (mrq->data->stop && mrq->data->stop->error)))) { + (mrq->data->stop && mrq->data->stop->error))) || + (host->chip->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST)) { /* Some controllers need this kick or reset won't work here */ if (host->chip->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) { diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 111aa10f1136..023656d2f1da 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2148,6 +2148,7 @@ #define PCI_DEVICE_ID_JMICRON_JMB365 0x2365 #define PCI_DEVICE_ID_JMICRON_JMB366 0x2366 #define PCI_DEVICE_ID_JMICRON_JMB368 0x2368 +#define PCI_DEVICE_ID_JMICRON_JMB38X_SD 0x2381 #define PCI_VENDOR_ID_KORENIX 0x1982 #define PCI_DEVICE_ID_KORENIX_JETCARDF0 0x1600 -- cgit v1.2.3-59-g8ed1b From cc3000e4ef13fa9f388f5a37f11c0fa3cc68112b Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Thu, 6 Dec 2007 23:12:46 -0500 Subject: mmc: remove unused 'mode' from the mmc_host structure This field and corresponding defines are simply never used anywhere in the code. But its mere presence is enough to confuse some host driver authors who attempt to rely on it. Let's eliminate the possibility for confusion and remove it entirely. Signed-off-by: Nicolas Pitre Signed-off-by: Pierre Ossman --- include/linux/mmc/host.h | 4 ---- 1 file changed, 4 deletions(-) diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 125eee1407ff..7ab962fa1d73 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -118,10 +118,6 @@ struct mmc_host { unsigned int removed:1; /* host is being removed */ #endif - unsigned int mode; /* current card mode of host */ -#define MMC_MODE_MMC 0 -#define MMC_MODE_SD 1 - struct mmc_card *card; /* device attached to this host */ wait_queue_head_t wq; -- cgit v1.2.3-59-g8ed1b From 1457edc72d187f452be1374c7d9281f1dfa16f32 Mon Sep 17 00:00:00 2001 From: Joachim Fenkes Date: Mon, 10 Dec 2007 12:20:57 +0100 Subject: IB/ehca: Return correct number of SGEs for SRQ Firmware would round up the number of SGEs to four, because the WQE structure holds four SGEs. For SRQ, only three are supported, so return a fixed value instead. Signed-off-by: Joachim Fenkes Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ehca/ehca_qp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c index dd126681fed0..eff5fb55604b 100644 --- a/drivers/infiniband/hw/ehca/ehca_qp.c +++ b/drivers/infiniband/hw/ehca/ehca_qp.c @@ -838,7 +838,7 @@ struct ib_srq *ehca_create_srq(struct ib_pd *pd, /* copy back return values */ srq_init_attr->attr.max_wr = qp_init_attr.cap.max_recv_wr; - srq_init_attr->attr.max_sge = qp_init_attr.cap.max_recv_sge; + srq_init_attr->attr.max_sge = 3; /* drive SRQ into RTR state */ mqpcb = ehca_alloc_fw_ctrlblock(GFP_KERNEL); @@ -1750,7 +1750,7 @@ int ehca_query_srq(struct ib_srq *srq, struct ib_srq_attr *srq_attr) } srq_attr->max_wr = qpcb->max_nr_outst_recv_wr - 1; - srq_attr->max_sge = qpcb->actual_nr_sges_in_rq_wqe; + srq_attr->max_sge = 3; srq_attr->srq_limit = EHCA_BMASK_GET( MQPCB_CURR_SRQ_LIMIT, qpcb->curr_srq_limit); -- cgit v1.2.3-59-g8ed1b From 4faf7757955239c1b259e7dab224d4638a99b456 Mon Sep 17 00:00:00 2001 From: Joachim Fenkes Date: Mon, 10 Dec 2007 18:59:10 +0100 Subject: IB/ehca: Serialize HCA-related hCalls if necessary Several pSeries firmware versions share a rare locking issue in the HCA-related hCalls. Check for a feature flag that indicates the issue being fixed and serialize all HCA hCalls if not. Signed-off-by: Joachim Fenkes Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ehca/ehca_main.c | 13 +++++++++++++ drivers/infiniband/hw/ehca/hcp_if.c | 28 +++++++++++----------------- drivers/infiniband/hw/ehca/hipz_hw.h | 1 + 3 files changed, 25 insertions(+), 17 deletions(-) diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c index 90d4334179bf..c7bff3ee9ab9 100644 --- a/drivers/infiniband/hw/ehca/ehca_main.c +++ b/drivers/infiniband/hw/ehca/ehca_main.c @@ -43,6 +43,7 @@ #ifdef CONFIG_PPC_64K_PAGES #include #endif + #include "ehca_classes.h" #include "ehca_iverbs.h" #include "ehca_mrmw.h" @@ -66,6 +67,7 @@ int ehca_poll_all_eqs = 1; int ehca_static_rate = -1; int ehca_scaling_code = 0; int ehca_mr_largepage = 1; +int ehca_lock_hcalls = -1; module_param_named(open_aqp1, ehca_open_aqp1, int, S_IRUGO); module_param_named(debug_level, ehca_debug_level, int, S_IRUGO); @@ -77,6 +79,7 @@ module_param_named(poll_all_eqs, ehca_poll_all_eqs, int, S_IRUGO); module_param_named(static_rate, ehca_static_rate, int, S_IRUGO); module_param_named(scaling_code, ehca_scaling_code, int, S_IRUGO); module_param_named(mr_largepage, ehca_mr_largepage, int, S_IRUGO); +module_param_named(lock_hcalls, ehca_lock_hcalls, bool, S_IRUGO); MODULE_PARM_DESC(open_aqp1, "AQP1 on startup (0: no (default), 1: yes)"); @@ -102,6 +105,9 @@ MODULE_PARM_DESC(scaling_code, MODULE_PARM_DESC(mr_largepage, "use large page for MR (0: use PAGE_SIZE (default), " "1: use large page depending on MR size"); +MODULE_PARM_DESC(lock_hcalls, + "serialize all hCalls made by the driver " + "(default: autodetect)"); DEFINE_RWLOCK(ehca_qp_idr_lock); DEFINE_RWLOCK(ehca_cq_idr_lock); @@ -258,6 +264,7 @@ static struct cap_descr { { HCA_CAP_UD_LL_QP, "HCA_CAP_UD_LL_QP" }, { HCA_CAP_RESIZE_MR, "HCA_CAP_RESIZE_MR" }, { HCA_CAP_MINI_QP, "HCA_CAP_MINI_QP" }, + { HCA_CAP_H_ALLOC_RES_SYNC, "HCA_CAP_H_ALLOC_RES_SYNC" }, }; static int ehca_sense_attributes(struct ehca_shca *shca) @@ -333,6 +340,12 @@ static int ehca_sense_attributes(struct ehca_shca *shca) if (EHCA_BMASK_GET(hca_cap_descr[i].mask, shca->hca_cap)) ehca_gen_dbg(" %s", hca_cap_descr[i].descr); + /* Autodetect hCall locking -- the "H_ALLOC_RESOURCE synced" flag is + * a firmware property, so it's valid across all adapters + */ + if (ehca_lock_hcalls == -1) + ehca_lock_hcalls = !(shca->hca_cap & HCA_CAP_H_ALLOC_RES_SYNC); + /* translate supported MR page sizes; always support 4K */ shca->hca_cap_mr_pgsize = EHCA_PAGESIZE; if (ehca_mr_largepage) { /* support extra sizes only if enabled */ diff --git a/drivers/infiniband/hw/ehca/hcp_if.c b/drivers/infiniband/hw/ehca/hcp_if.c index c16a21374bb5..331b5e82ef77 100644 --- a/drivers/infiniband/hw/ehca/hcp_if.c +++ b/drivers/infiniband/hw/ehca/hcp_if.c @@ -89,6 +89,7 @@ #define HCALL9_REGS_FORMAT HCALL7_REGS_FORMAT " r11=%lx r12=%lx" static DEFINE_SPINLOCK(hcall_lock); +extern int ehca_lock_hcalls; static u32 get_longbusy_msecs(int longbusy_rc) { @@ -120,26 +121,21 @@ static long ehca_plpar_hcall_norets(unsigned long opcode, unsigned long arg7) { long ret; - int i, sleep_msecs, do_lock; - unsigned long flags; + int i, sleep_msecs; + unsigned long flags = 0; ehca_gen_dbg("opcode=%lx " HCALL7_REGS_FORMAT, opcode, arg1, arg2, arg3, arg4, arg5, arg6, arg7); - /* lock H_FREE_RESOURCE(MR) against itself and H_ALLOC_RESOURCE(MR) */ - if ((opcode == H_FREE_RESOURCE) && (arg7 == 5)) { - arg7 = 0; /* better not upset firmware */ - do_lock = 1; - } - for (i = 0; i < 5; i++) { - if (do_lock) + /* serialize hCalls to work around firmware issue */ + if (ehca_lock_hcalls) spin_lock_irqsave(&hcall_lock, flags); ret = plpar_hcall_norets(opcode, arg1, arg2, arg3, arg4, arg5, arg6, arg7); - if (do_lock) + if (ehca_lock_hcalls) spin_unlock_irqrestore(&hcall_lock, flags); if (H_IS_LONG_BUSY(ret)) { @@ -174,24 +170,22 @@ static long ehca_plpar_hcall9(unsigned long opcode, unsigned long arg9) { long ret; - int i, sleep_msecs, do_lock; + int i, sleep_msecs; unsigned long flags = 0; ehca_gen_dbg("INPUT -- opcode=%lx " HCALL9_REGS_FORMAT, opcode, arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8, arg9); - /* lock H_ALLOC_RESOURCE(MR) against itself and H_FREE_RESOURCE(MR) */ - do_lock = ((opcode == H_ALLOC_RESOURCE) && (arg2 == 5)); - for (i = 0; i < 5; i++) { - if (do_lock) + /* serialize hCalls to work around firmware issue */ + if (ehca_lock_hcalls) spin_lock_irqsave(&hcall_lock, flags); ret = plpar_hcall9(opcode, outs, arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8, arg9); - if (do_lock) + if (ehca_lock_hcalls) spin_unlock_irqrestore(&hcall_lock, flags); if (H_IS_LONG_BUSY(ret)) { @@ -821,7 +815,7 @@ u64 hipz_h_free_resource_mr(const struct ipz_adapter_handle adapter_handle, return ehca_plpar_hcall_norets(H_FREE_RESOURCE, adapter_handle.handle, /* r4 */ mr->ipz_mr_handle.handle, /* r5 */ - 0, 0, 0, 0, 5); + 0, 0, 0, 0, 0); } u64 hipz_h_reregister_pmr(const struct ipz_adapter_handle adapter_handle, diff --git a/drivers/infiniband/hw/ehca/hipz_hw.h b/drivers/infiniband/hw/ehca/hipz_hw.h index 485b8400359e..bf996c7acc42 100644 --- a/drivers/infiniband/hw/ehca/hipz_hw.h +++ b/drivers/infiniband/hw/ehca/hipz_hw.h @@ -378,6 +378,7 @@ struct hipz_query_hca { #define HCA_CAP_UD_LL_QP EHCA_BMASK_IBM(16, 16) #define HCA_CAP_RESIZE_MR EHCA_BMASK_IBM(17, 17) #define HCA_CAP_MINI_QP EHCA_BMASK_IBM(18, 18) +#define HCA_CAP_H_ALLOC_RES_SYNC EHCA_BMASK_IBM(19, 19) /* query port response block */ struct hipz_query_port { -- cgit v1.2.3-59-g8ed1b From 69ae6fee4f95c0535e49e338ce0ed3b27fd485b5 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 12 Dec 2007 23:31:57 +0100 Subject: ide-scsi: add ide_scsi_hex_dump() helper Cc: Andrew Morton Cc: Denis Cheng Cc: Randy Dunlap Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/scsi/ide-scsi.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 7a835a35f21d..9706de9d98d5 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -242,6 +242,11 @@ static void idescsi_output_buffers (ide_drive_t *drive, idescsi_pc_t *pc, unsign } } +static void ide_scsi_hex_dump(u8 *data, int len) +{ + print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, data, len, 0); +} + static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_command) { idescsi_scsi_t *scsi = drive_to_idescsi(drive); @@ -272,8 +277,7 @@ static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_co pc->scsi_cmd = ((idescsi_pc_t *) failed_command->special)->scsi_cmd; if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) { printk ("ide-scsi: %s: queue cmd = ", drive->name); - print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, pc->c, - 6, 0); + ide_scsi_hex_dump(pc->c, 6); } rq->rq_disk = scsi->disk; return ide_do_drive_cmd(drive, rq, ide_preempt); @@ -328,8 +332,7 @@ static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs) idescsi_pc_t *opc = (idescsi_pc_t *) rq->buffer; if (log) { printk ("ide-scsi: %s: wrap up check %lu, rst = ", drive->name, opc->scsi_cmd->serial_number); - print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, - pc->buffer, 16, 0); + ide_scsi_hex_dump(pc->buffer, 16); } memcpy((void *) opc->scsi_cmd->sense_buffer, pc->buffer, SCSI_SENSE_BUFFERSIZE); kfree(pc->buffer); @@ -808,12 +811,10 @@ static int idescsi_queue (struct scsi_cmnd *cmd, if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) { printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number); - print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, - cmd->cmnd, cmd->cmd_len, 0); + ide_scsi_hex_dump(cmd->cmnd, cmd->cmd_len); if (memcmp(pc->c, cmd->cmnd, cmd->cmd_len)) { printk ("ide-scsi: %s: que %lu, tsl = ", drive->name, cmd->serial_number); - print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, - pc->c, 12, 0); + ide_scsi_hex_dump(pc->c, 12); } } -- cgit v1.2.3-59-g8ed1b From ad0e74d3851e440e0882424577bc984c89019f52 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 12 Dec 2007 23:31:57 +0100 Subject: ide: add missing checks for control register existence Add missing checks for control register existence (some legacy m68k specific IDE controllers don't have it). Also use drive->ctl while at it. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 3 ++- drivers/ide/ide-probe.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index db22d1ff4e55..bef781fec500 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -970,7 +970,8 @@ static void ide_check_pm_state(ide_drive_t *drive, struct request *rq) if (rc) printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name); SELECT_DRIVE(drive); - HWIF(drive)->OUTB(8, HWIF(drive)->io_ports[IDE_CONTROL_OFFSET]); + if (IDE_CONTROL_REG) + HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG); rc = ide_wait_not_busy(HWIF(drive), 100000); if (rc) printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name); diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index ee848c705995..bd0a6004a13b 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -667,7 +667,8 @@ static int wait_hwif_ready(ide_hwif_t *hwif) /* Ignore disks that we will not probe for later. */ if (!drive->noprobe || drive->present) { SELECT_DRIVE(drive); - hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]); + if (IDE_CONTROL_REG) + hwif->OUTB(drive->ctl, IDE_CONTROL_REG); mdelay(2); rc = ide_wait_not_busy(hwif, 35000); if (rc) -- cgit v1.2.3-59-g8ed1b From 46255d4083ca6c6e3c40cb4d2f3198c77bca7e24 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 12 Dec 2007 23:31:57 +0100 Subject: ide: deprecate CONFIG_BLK_DEV_OFFBOARD Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 45b22282f149..fb06555708a8 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -390,7 +390,7 @@ config IDEPCI_PCIBUS_ORDER # TODO: split it on per host driver config options (or module parameters) config BLK_DEV_OFFBOARD - bool "Boot off-board chipsets first support" + bool "Boot off-board chipsets first support (DEPRECATED)" depends on BLK_DEV_IDEPCI && (BLK_DEV_AEC62XX || BLK_DEV_GENERIC || BLK_DEV_HPT34X || BLK_DEV_HPT366 || BLK_DEV_PDC202XX_NEW || BLK_DEV_PDC202XX_OLD || BLK_DEV_TC86C001) help Normally, IDE controllers built into the motherboard (on-board @@ -410,6 +410,10 @@ config BLK_DEV_OFFBOARD Note that, if you do this, the order of the hd* devices will be rearranged which may require modification of fstab and other files. + Please also note that this method of assuring stable naming of + IDE devices is unreliable and use other means for achieving it + (i.e. udev). + If in doubt, say N. config BLK_DEV_GENERIC -- cgit v1.2.3-59-g8ed1b From 125a8191dcbc927441263a332826989cc2925681 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 12 Dec 2007 23:31:57 +0100 Subject: ide: fix ide_scan_pcibus() error message Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/setup-pci.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index 25fd09053220..708e01d8a9de 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -794,9 +794,10 @@ void __init ide_scan_pcibus (int scan_direction) list_for_each_safe(l, n, &ide_pci_drivers) { list_del(l); d = list_entry(l, struct pci_driver, node); - if (__pci_register_driver(d, d->driver.owner, d->driver.mod_name)) - printk(KERN_ERR "%s: failed to register driver for %s\n", - __FUNCTION__, d->driver.mod_name); + if (__pci_register_driver(d, d->driver.owner, + d->driver.mod_name)) + printk(KERN_ERR "%s: failed to register %s driver\n", + __FUNCTION__, d->driver.mod_name); } } #endif -- cgit v1.2.3-59-g8ed1b From 1b7d3477a7b0d52406d68b01bc8931f43112677f Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 12 Dec 2007 23:31:57 +0100 Subject: ide: coding style fixes for drivers/ide/setup-pci.c * remove trailing whitespaces * 'if()' -> 'if ()' * remove extra new-line before EXPORT_SYMBOL_GPL() * add extra new-line after 'id' definition * respect 80-columns limit There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/setup-pci.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index 708e01d8a9de..d2cd5a3d38f8 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -704,7 +704,7 @@ EXPORT_SYMBOL_GPL(ide_setup_pci_devices); /* * Module interfaces */ - + static int pre_init = 1; /* Before first ordered IDE scan */ static LIST_HEAD(ide_pci_drivers); @@ -714,7 +714,7 @@ static LIST_HEAD(ide_pci_drivers); * @module: owner module of the driver * * Registers a driver with the IDE layer. The IDE layer arranges that - * boot time setup is done in the expected device order and then + * boot time setup is done in the expected device order and then * hands the controllers off to the core PCI code to do the rest of * the work. * @@ -724,13 +724,12 @@ static LIST_HEAD(ide_pci_drivers); int __ide_pci_register_driver(struct pci_driver *driver, struct module *module, const char *mod_name) { - if(!pre_init) + if (!pre_init) return __pci_register_driver(driver, module, mod_name); driver->driver.owner = module; list_add_tail(&driver->node, &ide_pci_drivers); return 0; } - EXPORT_SYMBOL_GPL(__ide_pci_register_driver); /** @@ -741,17 +740,18 @@ EXPORT_SYMBOL_GPL(__ide_pci_register_driver); * This is only used during boot up to get the ordering correct. After * boot up the pci layer takes over the job. */ - + static int __init ide_scan_pcidev(struct pci_dev *dev) { struct list_head *l; struct pci_driver *d; - + list_for_each(l, &ide_pci_drivers) { d = list_entry(l, struct pci_driver, node); if (d->id_table) { - const struct pci_device_id *id = pci_match_id(d->id_table, - dev); + const struct pci_device_id *id = + pci_match_id(d->id_table, dev); + if (id != NULL && d->probe(dev, id) >= 0) { dev->driver = d; pci_dev_get(dev); @@ -779,13 +779,13 @@ void __init ide_scan_pcibus (int scan_direction) pre_init = 0; if (!scan_direction) - while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) + while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev))) ide_scan_pcidev(dev); else - while ((dev = pci_get_device_reverse(PCI_ANY_ID, PCI_ANY_ID, dev)) - != NULL) + while ((dev = pci_get_device_reverse(PCI_ANY_ID, PCI_ANY_ID, + dev))) ide_scan_pcidev(dev); - + /* * Hand the drivers over to the PCI layer now we * are post init. -- cgit v1.2.3-59-g8ed1b From e11b9035a47da66fcd4bafd3a5f6b14f51ca667e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 12 Dec 2007 23:31:58 +0100 Subject: ide: add /sys/bus/ide/devices/*/{model,firmware,serial} sysfs entries Cc: Dan Kegel Cc: Kay Sievers Cc: Xavier Bestel Cc: Andrey Borzenkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 674a65c1a130..85740ae5d689 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -1670,10 +1670,34 @@ static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, return sprintf(buf, "ide:m-%s\n", media_string(drive)); } +static ssize_t model_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + ide_drive_t *drive = to_ide_device(dev); + return sprintf(buf, "%s\n", drive->id->model); +} + +static ssize_t firmware_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + ide_drive_t *drive = to_ide_device(dev); + return sprintf(buf, "%s\n", drive->id->fw_rev); +} + +static ssize_t serial_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + ide_drive_t *drive = to_ide_device(dev); + return sprintf(buf, "%s\n", drive->id->serial_no); +} + static struct device_attribute ide_dev_attrs[] = { __ATTR_RO(media), __ATTR_RO(drivename), __ATTR_RO(modalias), + __ATTR_RO(model), + __ATTR_RO(firmware), + __ATTR(serial, 0400, serial_show, NULL), __ATTR_NULL }; -- cgit v1.2.3-59-g8ed1b From 3ab7efe8e2cbcca2d401b43cfcc2fa9a7dac2299 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 12 Dec 2007 23:31:58 +0100 Subject: ide: DMA reporting and validity checking fixes (take 3) * ide_xfer_verbose() fixups: - beautify returned mode names - fix PIO5 reporting - make it return 'const char *' * Change printk() level from KERN_DEBUG to KERN_INFO in ide_find_dma_mode(). * Add ide_id_dma_bug() helper based on ide_dma_verbose() to check for invalid DMA info in identify block. * Use ide_id_dma_bug() in ide_tune_dma() and ide_driveid_update(). As a result DMA won't be tuned or will be disabled after tuning if device reports inconsistent info about enabled DMA mode (ide_dma_verbose() does the same checks while the IDE device is probed by ide-{cd,disk} device driver). * Remove no longer needed ide_dma_verbose(). This patch should fix the following problem with out-of-sync IDE messages reported by Nick Warne: hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache<7>hdd: skipping word 93 validity check , UDMA(66) and later debugged by Mark Lord to be caused by: ide_dma_verbose() printk( ... "2048kB Cache"); eighty_ninty_three() printk(KERN_DEBUG "%s: skipping word 93 validity check\n"); ide_dma_verbose() printk(", UDMA(66)" Please note that as a result ide-{cd,disk} device drivers won't report the DMA speed used but this is intended since now DMA mode being used is always reported by IDE core code. v2: * fixes suggested by Randy: - use KERN_CONT for printk()-s in ide-{cd,disk}.c - don't remove argument name from ide_xfer_verbose() declaration v3: * Remove incorrect check for (id->field_valid & 1) from ide_id_dma_bug() (spotted by Sergei). * "XFER SLOW" -> "PIO SLOW" in ide_xfer_verbose() (suggested by Sergei). * Fix ide_find_dma_mode() to report the correct mode ('mode' after being limited by 'req_mode'). Cc: Sergei Shtylyov Cc: Nick Warne Cc: Mark Lord Cc: Randy Dunlap Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 7 +----- drivers/ide/ide-disk.c | 7 ++---- drivers/ide/ide-dma.c | 60 +++++++++++++------------------------------------- drivers/ide/ide-iops.c | 3 +++ drivers/ide/ide-lib.c | 55 +++++++++++++++++++++++---------------------- include/linux/ide.h | 6 ++--- 6 files changed, 53 insertions(+), 85 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 57a5f63d6ae3..db9abd83d959 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -3049,12 +3049,7 @@ int ide_cdrom_probe_capabilities (ide_drive_t *drive) else printk(" drive"); - printk(", %dkB Cache", be16_to_cpu(cap.buffer_size)); - - if (drive->using_dma) - ide_dma_verbose(drive); - - printk("\n"); + printk(KERN_CONT ", %dkB Cache\n", be16_to_cpu(cap.buffer_size)); return nslots; } diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 00123d99527a..b77c849cdd28 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -961,11 +961,8 @@ static void idedisk_setup (ide_drive_t *drive) if (id->buf_size) printk (" w/%dKiB Cache", id->buf_size/2); - printk(", CHS=%d/%d/%d", - drive->bios_cyl, drive->bios_head, drive->bios_sect); - if (drive->using_dma) - ide_dma_verbose(drive); - printk("\n"); + printk(KERN_CONT ", CHS=%d/%d/%d\n", + drive->bios_cyl, drive->bios_head, drive->bios_sect); /* write cache enabled? */ if ((id->csfo & 1) || (id->cfs_enable_1 & (1 << 5))) diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 0d795a1678c7..6879aaae544d 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -753,10 +753,12 @@ u8 ide_find_dma_mode(ide_drive_t *drive, u8 req_mode) mode = XFER_MW_DMA_1; } - printk(KERN_DEBUG "%s: %s mode selected\n", drive->name, + mode = min(mode, req_mode); + + printk(KERN_INFO "%s: %s mode selected\n", drive->name, mode ? ide_xfer_verbose(mode) : "no DMA"); - return min(mode, req_mode); + return mode; } EXPORT_SYMBOL_GPL(ide_find_dma_mode); @@ -772,6 +774,9 @@ static int ide_tune_dma(ide_drive_t *drive) if (__ide_dma_bad_drive(drive)) return 0; + if (ide_id_dma_bug(drive)) + return 0; + if (drive->hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA) return config_drive_for_dma(drive); @@ -806,58 +811,23 @@ static int ide_dma_check(ide_drive_t *drive) return vdma ? 0 : -1; } -void ide_dma_verbose(ide_drive_t *drive) +int ide_id_dma_bug(ide_drive_t *drive) { - struct hd_driveid *id = drive->id; - ide_hwif_t *hwif = HWIF(drive); + struct hd_driveid *id = drive->id; if (id->field_valid & 4) { if ((id->dma_ultra >> 8) && (id->dma_mword >> 8)) - goto bug_dma_off; - if (id->dma_ultra & ((id->dma_ultra >> 8) & hwif->ultra_mask)) { - if (((id->dma_ultra >> 11) & 0x1F) && - eighty_ninty_three(drive)) { - if ((id->dma_ultra >> 15) & 1) { - printk(", UDMA(mode 7)"); - } else if ((id->dma_ultra >> 14) & 1) { - printk(", UDMA(133)"); - } else if ((id->dma_ultra >> 13) & 1) { - printk(", UDMA(100)"); - } else if ((id->dma_ultra >> 12) & 1) { - printk(", UDMA(66)"); - } else if ((id->dma_ultra >> 11) & 1) { - printk(", UDMA(44)"); - } else - goto mode_two; - } else { - mode_two: - if ((id->dma_ultra >> 10) & 1) { - printk(", UDMA(33)"); - } else if ((id->dma_ultra >> 9) & 1) { - printk(", UDMA(25)"); - } else if ((id->dma_ultra >> 8) & 1) { - printk(", UDMA(16)"); - } - } - } else { - printk(", (U)DMA"); /* Can be BIOS-enabled! */ - } + goto err_out; } else if (id->field_valid & 2) { if ((id->dma_mword >> 8) && (id->dma_1word >> 8)) - goto bug_dma_off; - printk(", DMA"); - } else if (id->field_valid & 1) { - goto bug_dma_off; + goto err_out; } - return; -bug_dma_off: - printk(", BUG DMA OFF"); - hwif->dma_off_quietly(drive); - return; + return 0; +err_out: + printk(KERN_ERR "%s: bad DMA info in identify block\n", drive->name); + return 1; } -EXPORT_SYMBOL(ide_dma_verbose); - int ide_set_dma(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 5c3256180ae5..cef405ddaf0e 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -748,6 +748,9 @@ int ide_driveid_update(ide_drive_t *drive) drive->id->dma_1word = id->dma_1word; /* anything more ? */ kfree(id); + + if (drive->using_dma && ide_id_dma_bug(drive)) + ide_dma_off(drive); } return 1; diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 1609b8604f56..062d3bcb2471 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -29,41 +29,44 @@ * Add common non I/O op stuff here. Make sure it has proper * kernel-doc function headers or your patch will be rejected */ - + +static const char *udma_str[] = + { "UDMA/16", "UDMA/25", "UDMA/33", "UDMA/44", + "UDMA/66", "UDMA/100", "UDMA/133", "UDMA7" }; +static const char *mwdma_str[] = + { "MWDMA0", "MWDMA1", "MWDMA2" }; +static const char *swdma_str[] = + { "SWDMA0", "SWDMA1", "SWDMA2" }; +static const char *pio_str[] = + { "PIO0", "PIO1", "PIO2", "PIO3", "PIO4", "PIO5" }; /** * ide_xfer_verbose - return IDE mode names - * @xfer_rate: rate to name + * @mode: transfer mode * * Returns a constant string giving the name of the mode * requested. */ -char *ide_xfer_verbose (u8 xfer_rate) +const char *ide_xfer_verbose(u8 mode) { - switch(xfer_rate) { - case XFER_UDMA_7: return("UDMA 7"); - case XFER_UDMA_6: return("UDMA 6"); - case XFER_UDMA_5: return("UDMA 5"); - case XFER_UDMA_4: return("UDMA 4"); - case XFER_UDMA_3: return("UDMA 3"); - case XFER_UDMA_2: return("UDMA 2"); - case XFER_UDMA_1: return("UDMA 1"); - case XFER_UDMA_0: return("UDMA 0"); - case XFER_MW_DMA_2: return("MW DMA 2"); - case XFER_MW_DMA_1: return("MW DMA 1"); - case XFER_MW_DMA_0: return("MW DMA 0"); - case XFER_SW_DMA_2: return("SW DMA 2"); - case XFER_SW_DMA_1: return("SW DMA 1"); - case XFER_SW_DMA_0: return("SW DMA 0"); - case XFER_PIO_4: return("PIO 4"); - case XFER_PIO_3: return("PIO 3"); - case XFER_PIO_2: return("PIO 2"); - case XFER_PIO_1: return("PIO 1"); - case XFER_PIO_0: return("PIO 0"); - case XFER_PIO_SLOW: return("PIO SLOW"); - default: return("XFER ERROR"); - } + const char *s; + u8 i = mode & 0xf; + + if (mode >= XFER_UDMA_0 && mode <= XFER_UDMA_7) + s = udma_str[i]; + else if (mode >= XFER_MW_DMA_0 && mode <= XFER_MW_DMA_2) + s = mwdma_str[i]; + else if (mode >= XFER_SW_DMA_0 && mode <= XFER_SW_DMA_2) + s = swdma_str[i]; + else if (mode >= XFER_PIO_0 && mode <= XFER_PIO_5) + s = pio_str[i & 0x7]; + else if (mode == XFER_PIO_SLOW) + s = "PIO SLOW"; + else + s = "XFER ERROR"; + + return s; } EXPORT_SYMBOL(ide_xfer_verbose); diff --git a/include/linux/ide.h b/include/linux/ide.h index dc75ccbcf991..9a6a41e7079f 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1255,6 +1255,7 @@ int ide_in_drive_list(struct hd_driveid *, const struct drive_list_entry *); #ifdef CONFIG_BLK_DEV_IDEDMA int __ide_dma_bad_drive(ide_drive_t *); +int ide_id_dma_bug(ide_drive_t *); u8 ide_find_dma_mode(ide_drive_t *, u8); @@ -1264,7 +1265,6 @@ static inline u8 ide_max_dma_mode(ide_drive_t *drive) } void ide_dma_off(ide_drive_t *); -void ide_dma_verbose(ide_drive_t *); int ide_set_dma(ide_drive_t *); ide_startstop_t ide_dma_intr(ide_drive_t *); @@ -1287,6 +1287,7 @@ extern void ide_dma_timeout(ide_drive_t *); #endif /* CONFIG_BLK_DEV_IDEDMA_PCI */ #else +static inline int ide_id_dma_bug(ide_drive_t *drive) { return 0; } static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; } static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; } static inline void ide_dma_off(ide_drive_t *drive) { ; } @@ -1333,8 +1334,7 @@ static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data) hwif->hwif_data = data; } -/* ide-lib.c */ -extern char *ide_xfer_verbose(u8 xfer_rate); +const char *ide_xfer_verbose(u8 mode); extern void ide_toggle_bounce(ide_drive_t *drive, int on); extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate); -- cgit v1.2.3-59-g8ed1b From c86ae7df90a26708e9e54e3a362046873d874e6c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 12 Dec 2007 23:31:58 +0100 Subject: ide-cd: remove dead post_transform_command() post_transform_command() call in cdrom_newpc_intr() has no effect because it is done after the request has already been fully completed (rq->bio and rq->data are always NULL). It was verified to be true regardless whether INQUIRY command is using DMA or PIO to transfer data (by using modified Tejun Heo's test-shortsg.c utility and adding a few printk()-s to ide-cd). This was uncovered thanks to the "blk_end_request: full I/O completion handler (take 3)" patch series from Kiyoshi Ueda. Cc: jens.axboe@oracle.com Cc: bharrosh@panasas.com Cc: Kiyoshi Ueda Cc: Tejun Heo Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 28 ---------------------------- 1 file changed, 28 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index db9abd83d959..92ac658dac33 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1650,31 +1650,6 @@ static int cdrom_write_check_ireason(ide_drive_t *drive, int len, int ireason) return 1; } -static void post_transform_command(struct request *req) -{ - u8 *c = req->cmd; - char *ibuf; - - if (!blk_pc_request(req)) - return; - - if (req->bio) - ibuf = bio_data(req->bio); - else - ibuf = req->data; - - if (!ibuf) - return; - - /* - * set ansi-revision and response data as atapi - */ - if (c[0] == GPCMD_INQUIRY) { - ibuf[2] |= 2; - ibuf[3] = (ibuf[3] & 0xf0) | 2; - } -} - typedef void (xfer_func_t)(ide_drive_t *, void *, u32); /* @@ -1810,9 +1785,6 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) return ide_started; end_request: - if (!rq->data_len) - post_transform_command(rq); - spin_lock_irqsave(&ide_lock, flags); blkdev_dequeue_request(rq); end_that_request_last(rq, 1); -- cgit v1.2.3-59-g8ed1b From eadb6ecf761166aa55ad44f05b7a29b10ddaba34 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 12 Dec 2007 23:31:58 +0100 Subject: pdc202xx_new: fix Promise TX4 support In case of Promise TX4 the first PCI device is located at slot 1 and the second one is at slot 2 so the offset used by pci_get_slot() should be "+1" and not "+2". Thanks goes out to Markus Dietz for bugreport and testing this patch. Cc: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/pdc202xx_new.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c index 4234efeba606..2b4f44e45a1a 100644 --- a/drivers/ide/pci/pdc202xx_new.c +++ b/drivers/ide/pci/pdc202xx_new.c @@ -482,8 +482,9 @@ static struct pci_dev * __devinit pdc20270_get_dev2(struct pci_dev *dev) { struct pci_dev *dev2; - dev2 = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn) + 2, + dev2 = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn) + 1, PCI_FUNC(dev->devfn))); + if (dev2 && dev2->vendor == dev->vendor && dev2->device == dev->device) { -- cgit v1.2.3-59-g8ed1b From 809b53c4ef7188dc284498ef6e4ec2d4d587a275 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 12 Dec 2007 23:31:58 +0100 Subject: hpt366: fix HPT37x PIO mode timings (take 2) After looking into the HPT370 manual (now that I have it) and re-checking all the timing tables, here's what I have discovered: - at 33 MHz clock, PIO mode 0 timings turned to be overclocked, and all other PIO modes underclocked; - at 50 MHz clock, PIO modes 0 to 2 turned to be overclocked; - at 66 MHz clock, PIO mode 0 was overclocked too. Finally, the taskfile timing (matching PIO mode 0) turned to be overclocked at all clock frequencies (and in all manuals)... The new timings have been tested on HPT370 chip (at 33 MHz PCI clock) and on HPT371N chip (at both 50 and 66 MHz DPLL clock). Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/hpt366.c | 71 +++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 70 insertions(+), 1 deletion(-) diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index 5682895d36d9..9fce25bdec8a 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/hpt366.c Version 1.21 Oct 23, 2007 + * linux/drivers/ide/pci/hpt366.c Version 1.22 Dec 4, 2007 * * Copyright (C) 1999-2003 Andre Hedrick * Portions Copyright (C) 2001 Sun Microsystems, Inc. @@ -310,6 +310,8 @@ static u32 twenty_five_base_hpt36x[] = { /* XFER_PIO_0 */ 0xc0d08585 }; +#if 0 +/* These are the timing tables from the HighPoint open source drivers... */ static u32 thirty_three_base_hpt37x[] = { /* XFER_UDMA_6 */ 0x12446231, /* 0x12646231 ?? */ /* XFER_UDMA_5 */ 0x12446231, @@ -369,6 +371,73 @@ static u32 sixty_six_base_hpt37x[] = { /* XFER_PIO_1 */ 0x0d029d26, /* XFER_PIO_0 */ 0x0d029d5e }; +#else +/* + * The following are the new timing tables with PIO mode data/taskfile transfer + * overclocking fixed... + */ + +/* This table is taken from the HPT370 data manual rev. 1.02 */ +static u32 thirty_three_base_hpt37x[] = { + /* XFER_UDMA_6 */ 0x16455031, /* 0x16655031 ?? */ + /* XFER_UDMA_5 */ 0x16455031, + /* XFER_UDMA_4 */ 0x16455031, + /* XFER_UDMA_3 */ 0x166d5031, + /* XFER_UDMA_2 */ 0x16495031, + /* XFER_UDMA_1 */ 0x164d5033, + /* XFER_UDMA_0 */ 0x16515097, + + /* XFER_MW_DMA_2 */ 0x26515031, + /* XFER_MW_DMA_1 */ 0x26515033, + /* XFER_MW_DMA_0 */ 0x26515097, + + /* XFER_PIO_4 */ 0x06515021, + /* XFER_PIO_3 */ 0x06515022, + /* XFER_PIO_2 */ 0x06515033, + /* XFER_PIO_1 */ 0x06915065, + /* XFER_PIO_0 */ 0x06d1508a +}; + +static u32 fifty_base_hpt37x[] = { + /* XFER_UDMA_6 */ 0x1a861842, + /* XFER_UDMA_5 */ 0x1a861842, + /* XFER_UDMA_4 */ 0x1aae1842, + /* XFER_UDMA_3 */ 0x1a8e1842, + /* XFER_UDMA_2 */ 0x1a0e1842, + /* XFER_UDMA_1 */ 0x1a161854, + /* XFER_UDMA_0 */ 0x1a1a18ea, + + /* XFER_MW_DMA_2 */ 0x2a821842, + /* XFER_MW_DMA_1 */ 0x2a821854, + /* XFER_MW_DMA_0 */ 0x2a8218ea, + + /* XFER_PIO_4 */ 0x0a821842, + /* XFER_PIO_3 */ 0x0a821843, + /* XFER_PIO_2 */ 0x0a821855, + /* XFER_PIO_1 */ 0x0ac218a8, + /* XFER_PIO_0 */ 0x0b02190c +}; + +static u32 sixty_six_base_hpt37x[] = { + /* XFER_UDMA_6 */ 0x1c86fe62, + /* XFER_UDMA_5 */ 0x1caefe62, /* 0x1c8afe62 */ + /* XFER_UDMA_4 */ 0x1c8afe62, + /* XFER_UDMA_3 */ 0x1c8efe62, + /* XFER_UDMA_2 */ 0x1c92fe62, + /* XFER_UDMA_1 */ 0x1c9afe62, + /* XFER_UDMA_0 */ 0x1c82fe62, + + /* XFER_MW_DMA_2 */ 0x2c82fe62, + /* XFER_MW_DMA_1 */ 0x2c82fe66, + /* XFER_MW_DMA_0 */ 0x2c82ff2e, + + /* XFER_PIO_4 */ 0x0c82fe62, + /* XFER_PIO_3 */ 0x0c82fe84, + /* XFER_PIO_2 */ 0x0c82fea6, + /* XFER_PIO_1 */ 0x0d02ff26, + /* XFER_PIO_0 */ 0x0d42ff7f +}; +#endif #define HPT366_DEBUG_DRIVE_INFO 0 #define HPT371_ALLOW_ATA133_6 1 -- cgit v1.2.3-59-g8ed1b From 3f3e6e21845259854d862bfa3c39f6a84356fc3d Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 12 Dec 2007 23:32:00 +0100 Subject: ide: remove dead code from __ide_dma_test_irq() Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-dma.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 6879aaae544d..4703837bf1fc 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -611,12 +611,6 @@ static int __ide_dma_test_irq(ide_drive_t *drive) ide_hwif_t *hwif = HWIF(drive); u8 dma_stat = hwif->INB(hwif->dma_status); -#if 0 /* do not set unless you know what you are doing */ - if (dma_stat & 4) { - u8 stat = hwif->INB(IDE_STATUS_REG); - hwif->OUTB(hwif->dma_status, dma_stat & 0xE4); - } -#endif /* return 1 if INTR asserted */ if ((dma_stat & 4) == 4) return 1; -- cgit v1.2.3-59-g8ed1b From fedda1e13125153d502e84856a2640acdb4c38f0 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 12 Dec 2007 23:32:00 +0100 Subject: ide: remove stale changelog from ide-disk.c Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 26 -------------------------- 1 file changed, 26 deletions(-) diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index b77c849cdd28..b1781908e1f2 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -13,32 +13,6 @@ * and Andre Hedrick * * This is the IDE/ATA disk driver, as evolved from hd.c and ide.c. - * - * Version 1.00 move disk only code from ide.c to ide-disk.c - * support optional byte-swapping of all data - * Version 1.01 fix previous byte-swapping code - * Version 1.02 remove ", LBA" from drive identification msgs - * Version 1.03 fix display of id->buf_size for big-endian - * Version 1.04 add /proc configurable settings and S.M.A.R.T support - * Version 1.05 add capacity support for ATA3 >= 8GB - * Version 1.06 get boot-up messages to show full cyl count - * Version 1.07 disable door-locking if it fails - * Version 1.08 fixed CHS/LBA translations for ATA4 > 8GB, - * process of adding new ATA4 compliance. - * fixed problems in allowing fdisk to see - * the entire disk. - * Version 1.09 added increment of rq->sector in ide_multwrite - * added UDMA 3/4 reporting - * Version 1.10 request queue changes, Ultra DMA 100 - * Version 1.11 added 48-bit lba - * Version 1.12 adding taskfile io access method - * Version 1.13 added standby and flush-cache for notifier - * Version 1.14 added acoustic-wcache - * Version 1.15 convert all calls to ide_raw_taskfile - * since args will return register content. - * Version 1.16 added suspend-resume-checkpower - * Version 1.17 do flush on standby, do flush on ATA < ATA6 - * fix wcache setup. */ #define IDEDISK_VERSION "1.18" -- cgit v1.2.3-59-g8ed1b From bbe4d6d86565bfd9edbc3f19bc23f816af66240d Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 12 Dec 2007 23:32:00 +0100 Subject: ide: remove stale changelog from ide-probe.c Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 18 ++---------------- 1 file changed, 2 insertions(+), 16 deletions(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index bd0a6004a13b..2994523be7bf 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -13,22 +13,8 @@ * * This is the IDE probe module, as evolved from hd.c and ide.c. * - * Version 1.00 move drive probing code from ide.c to ide-probe.c - * Version 1.01 fix compilation problem for m68k - * Version 1.02 increase WAIT_PIDENTIFY to avoid CD-ROM locking at boot - * by Andrea Arcangeli - * Version 1.03 fix for (hwif->chipset == ide_4drives) - * Version 1.04 fixed buggy treatments of known flash memory cards - * - * Version 1.05 fix for (hwif->chipset == ide_pdc4030) - * added ide6/7/8/9 - * allowed for secondary flash card to be detectable - * with new flag : drive->ata_flash : 1; - * Version 1.06 stream line request queue and prep for cascade project. - * Version 1.07 max_sect <= 255; slower disks would get behind and - * then fall over when they get to 256. Paul G. - * Version 1.10 Update set for new IDE. drive->id is now always - * valid after probe time even with noprobe + * -- increase WAIT_PIDENTIFY to avoid CD-ROM locking at boot + * by Andrea Arcangeli */ #include -- cgit v1.2.3-59-g8ed1b From 644a9d764b4747af057b3db73ccba28a168b1f4f Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 12 Dec 2007 23:32:00 +0100 Subject: ide: fix ->io_32bit race in set_io_32bit() set_io_32bit() (ide_procset_t function) can race against running PIO transfers. Fix it by using ide_spin_wait_hwgroup(). Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 85740ae5d689..54943da6e4e5 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -800,11 +800,17 @@ int set_io_32bit(ide_drive_t *drive, int arg) if (arg < 0 || arg > 1 + (SUPPORT_VLB_SYNC << 1)) return -EINVAL; + if (ide_spin_wait_hwgroup(drive)) + return -EBUSY; + drive->io_32bit = arg; #ifdef CONFIG_BLK_DEV_DTC2278 if (HWIF(drive)->chipset == ide_dtc2278) HWIF(drive)->drives[!drive->select.b.unit].io_32bit = arg; #endif /* CONFIG_BLK_DEV_DTC2278 */ + + spin_unlock_irq(&ide_lock); + return 0; } -- cgit v1.2.3-59-g8ed1b From 78f5815368837ae7e3a0d3709c9f95f74e4d8537 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 12 Dec 2007 20:16:06 -0500 Subject: MAINTAINERS: update the NFS CLIENT entry Add in the new NFS mailing list on vger, website, and git tree info, and update my email address to reflect the fact that I've been working for netapp for the past 2 years. Signed-off-by: Trond Myklebust --- MAINTAINERS | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 9507b4207512..94143d727bab 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2751,8 +2751,10 @@ S: Maintained NFS CLIENT P: Trond Myklebust -M: trond.myklebust@fys.uio.no -L: linux-kernel@vger.kernel.org +M: Trond.Myklebust@netapp.com +L: linux-nfs@vger.kernel.org +W: http://client.linux-nfs.org +T: git git://git.linux-nfs.org/pub/linux/nfs-2.6.git S: Maintained NI5010 NETWORK DRIVER -- cgit v1.2.3-59-g8ed1b From 3f84307a10b4d9039c5c8f718bcdd0928c9994c1 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 12 Dec 2007 16:44:54 -0300 Subject: V4L/DVB (6803): buf-core.c locking fixes After commit 19fb1457990b6b7e15586ec7331541a184233acc the callers in videobuf-core.c that already hold the lock must call __videobuf_read_start() instead of videobuf_read_start(). Signed-off-by: Adrian Bunk Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/videobuf-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/videobuf-core.c b/drivers/media/video/videobuf-core.c index 81f77d2b4bd3..c8a5cb57963b 100644 --- a/drivers/media/video/videobuf-core.c +++ b/drivers/media/video/videobuf-core.c @@ -909,7 +909,7 @@ ssize_t videobuf_read_stream(struct videobuf_queue *q, if (q->streaming) goto done; if (!q->reading) { - retval = videobuf_read_start(q); + retval = __videobuf_read_start(q); if (retval < 0) goto done; } @@ -982,7 +982,7 @@ unsigned int videobuf_poll_stream(struct file *file, struct videobuf_buffer, stream); } else { if (!q->reading) - videobuf_read_start(q); + __videobuf_read_start(q); if (!q->reading) { rc = POLLERR; } else if (NULL == q->read_buf) { -- cgit v1.2.3-59-g8ed1b From 8f361453d8e9a67c85b2cf9b93c642c2d8fe0462 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 13 Dec 2007 06:13:38 -0800 Subject: [SPARC64]: Fix two kernel linear mapping setup bugs. This was caught and identified by Greg Onufer. Since we setup the 256M/4M bitmap table after taking over the trap table, it's possible for some 4M mapping to get loaded in the TLB beforhand which later will be 256M mappings. This can cause illegal TLB multiple-match conditions. Fix this by setting up the bitmap before we take over the trap table. Next, __flush_tlb_all() was not doing anything on hypervisor platforms. Fix by adding sun4v_mmu_demap_all() and calling it. Signed-off-by: David S. Miller --- arch/sparc64/kernel/entry.S | 12 ++++++++++++ arch/sparc64/mm/init.c | 29 ++++++++++++++++++++--------- include/asm-sparc64/hypervisor.h | 4 ++++ 3 files changed, 36 insertions(+), 9 deletions(-) diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index c9b0d7af64ae..ea257e828364 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -2593,3 +2593,15 @@ sun4v_mmustat_info: retl nop .size sun4v_mmustat_info, .-sun4v_mmustat_info + + .globl sun4v_mmu_demap_all + .type sun4v_mmu_demap_all,#function +sun4v_mmu_demap_all: + clr %o0 + clr %o1 + mov HV_MMU_ALL, %o2 + mov HV_FAST_MMU_DEMAP_ALL, %o5 + ta HV_FAST_TRAP + retl + nop + .size sun4v_mmu_demap_all, .-sun4v_mmu_demap_all diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index e18ccf85224f..fbeb55d71e76 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -1133,14 +1133,9 @@ static void __init mark_kpte_bitmap(unsigned long start, unsigned long end) } } -static void __init kernel_physical_mapping_init(void) +static void __init init_kpte_bitmap(void) { unsigned long i; -#ifdef CONFIG_DEBUG_PAGEALLOC - unsigned long mem_alloced = 0UL; -#endif - - read_obp_memory("reg", &pall[0], &pall_ents); for (i = 0; i < pall_ents; i++) { unsigned long phys_start, phys_end; @@ -1149,14 +1144,24 @@ static void __init kernel_physical_mapping_init(void) phys_end = phys_start + pall[i].reg_size; mark_kpte_bitmap(phys_start, phys_end); + } +} +static void __init kernel_physical_mapping_init(void) +{ #ifdef CONFIG_DEBUG_PAGEALLOC + unsigned long i, mem_alloced = 0UL; + + for (i = 0; i < pall_ents; i++) { + unsigned long phys_start, phys_end; + + phys_start = pall[i].phys_addr; + phys_end = phys_start + pall[i].reg_size; + mem_alloced += kernel_map_range(phys_start, phys_end, PAGE_KERNEL); -#endif } -#ifdef CONFIG_DEBUG_PAGEALLOC printk("Allocated %ld bytes for kernel page tables.\n", mem_alloced); @@ -1398,6 +1403,10 @@ void __init paging_init(void) inherit_prom_mappings(); + read_obp_memory("reg", &pall[0], &pall_ents); + + init_kpte_bitmap(); + /* Ok, we can use our TLB miss and window trap handlers safely. */ setup_tba(); @@ -1904,7 +1913,9 @@ void __flush_tlb_all(void) "wrpr %0, %1, %%pstate" : "=r" (pstate) : "i" (PSTATE_IE)); - if (tlb_type == spitfire) { + if (tlb_type == hypervisor) { + sun4v_mmu_demap_all(); + } else if (tlb_type == spitfire) { for (i = 0; i < 64; i++) { /* Spitfire Errata #32 workaround */ /* NOTE: Always runs on spitfire, so no diff --git a/include/asm-sparc64/hypervisor.h b/include/asm-sparc64/hypervisor.h index 524d49835dfd..3ad45dff52f8 100644 --- a/include/asm-sparc64/hypervisor.h +++ b/include/asm-sparc64/hypervisor.h @@ -709,6 +709,10 @@ extern unsigned long sun4v_mmu_tsb_ctx0(unsigned long num_descriptions, */ #define HV_FAST_MMU_DEMAP_ALL 0x24 +#ifndef __ASSEMBLY__ +extern void sun4v_mmu_demap_all(void); +#endif + /* mmu_map_perm_addr() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_MMU_MAP_PERM_ADDR -- cgit v1.2.3-59-g8ed1b From 3d758a4a48682639d3996968499913ecb1552e06 Mon Sep 17 00:00:00 2001 From: Joachim Fenkes Date: Thu, 13 Dec 2007 13:35:57 +0100 Subject: IB/ehca: Fix lock flag variable location, bump version number Signed-off-by: Joachim Fenkes Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ehca/ehca_classes.h | 1 + drivers/infiniband/hw/ehca/ehca_main.c | 2 +- drivers/infiniband/hw/ehca/hcp_if.c | 1 - 3 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/ehca/ehca_classes.h b/drivers/infiniband/hw/ehca/ehca_classes.h index 87f12d4312a7..74d2b72a11d8 100644 --- a/drivers/infiniband/hw/ehca/ehca_classes.h +++ b/drivers/infiniband/hw/ehca/ehca_classes.h @@ -322,6 +322,7 @@ extern int ehca_static_rate; extern int ehca_port_act_time; extern int ehca_use_hp_mr; extern int ehca_scaling_code; +extern int ehca_lock_hcalls; struct ipzu_queue_resp { u32 qe_size; /* queue entry size */ diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c index c7bff3ee9ab9..6a56d86a2951 100644 --- a/drivers/infiniband/hw/ehca/ehca_main.c +++ b/drivers/infiniband/hw/ehca/ehca_main.c @@ -50,7 +50,7 @@ #include "ehca_tools.h" #include "hcp_if.h" -#define HCAD_VERSION "0024" +#define HCAD_VERSION "0025" MODULE_LICENSE("Dual BSD/GPL"); MODULE_AUTHOR("Christoph Raisch "); diff --git a/drivers/infiniband/hw/ehca/hcp_if.c b/drivers/infiniband/hw/ehca/hcp_if.c index 331b5e82ef77..7029aa653751 100644 --- a/drivers/infiniband/hw/ehca/hcp_if.c +++ b/drivers/infiniband/hw/ehca/hcp_if.c @@ -89,7 +89,6 @@ #define HCALL9_REGS_FORMAT HCALL7_REGS_FORMAT " r11=%lx r12=%lx" static DEFINE_SPINLOCK(hcall_lock); -extern int ehca_lock_hcalls; static u32 get_longbusy_msecs(int longbusy_rc) { -- cgit v1.2.3-59-g8ed1b From 971edcfc8bee41c0b41e21bf10751c5b22028a82 Mon Sep 17 00:00:00 2001 From: Guillaume Chazarain Date: Tue, 11 Dec 2007 13:22:08 +0100 Subject: kbuild: re-enable Makefile generation in a new O=... directory The commit: 18c32dac75b187d1a4e858f3cfdf03e844129f5e "kbuild: fix building with O=.. options" disabled the creation of a Makefile in a new O=... directory. Restore it. Signed-off-by: Guillaume Chazarain Signed-off-by: Sam Ravnborg --- scripts/mkmakefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/mkmakefile b/scripts/mkmakefile index 9ad1bd793252..e0f54b9d8fec 100644 --- a/scripts/mkmakefile +++ b/scripts/mkmakefile @@ -13,7 +13,7 @@ test ! -r $2/Makefile -o -O $2/Makefile || exit 0 # Only overwrite automatically generated Makefiles # (so we do not overwrite kernel Makefile) -if ! grep -q Automatically $2/Makefile +if test -e $2/Makefile && ! grep -q Automatically $2/Makefile then exit 0 fi -- cgit v1.2.3-59-g8ed1b From b3aa2269bd06681fbd0c47d2007381c35258ce0c Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 9 Dec 2007 21:13:38 -0300 Subject: V4L/DVB (6798): saa7134: enable LNA in analog mode for Hauppauge WinTV HVR-1110 Thanks to Hermann Pitton for noticing that this was missing. Signed-off-by: Michael Krufky Cc: Hermann Pitton Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-cards.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index c6eb1e37a46e..98c1b084a716 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -3221,6 +3221,7 @@ struct saa7134_board saa7134_boards[] = { .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, + .tuner_config = 1, .mpeg = SAA7134_MPEG_DVB, .inputs = {{ .name = name_tv, -- cgit v1.2.3-59-g8ed1b From 1c1a8b9cbec2b6a75b8fa0abf6ccfd948229998a Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 12 Dec 2007 15:40:32 -0300 Subject: V4L/DVB (6814): Makefile: always enter video/ Since not all code under drivers/media/video/ depends on CONFIG_VIDEO_DEV we cannot only enter it depending on CONFIG_VIDEO_DEV. Signed-off-by: Adrian Bunk Signed-off-by: Mauro Carvalho Chehab --- drivers/media/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/Makefile b/drivers/media/Makefile index 8fa19939c2b6..8cf91353b56a 100644 --- a/drivers/media/Makefile +++ b/drivers/media/Makefile @@ -3,6 +3,6 @@ # obj-y := common/ -obj-$(CONFIG_VIDEO_DEV) += video/ +obj-y += video/ obj-$(CONFIG_VIDEO_DEV) += radio/ obj-$(CONFIG_DVB_CORE) += dvb/ -- cgit v1.2.3-59-g8ed1b From 4b5ae10c815941fab8e0e3b3801b4cb60ee2383a Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 13 Dec 2007 02:30:26 -0300 Subject: V4L/DVB (6819): i2c: fix drivers/media/video/bt866.c usage_count got removed. Signed-off-by: Andrew Morton Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bt866.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/media/video/bt866.c b/drivers/media/video/bt866.c index b767b098d14b..96b415576f0d 100644 --- a/drivers/media/video/bt866.c +++ b/drivers/media/video/bt866.c @@ -300,7 +300,6 @@ static struct i2c_client bt866_client_tmpl = .addr = 0, .adapter = NULL, .driver = &i2c_driver_bt866, - .usage_count = 0 }; static int bt866_found_proc(struct i2c_adapter *adapter, -- cgit v1.2.3-59-g8ed1b From 2300317f30770abd625fb051b0e5d373ce55a6ad Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Wed, 12 Dec 2007 22:14:00 -0300 Subject: V4L/DVB (6820): s5h1409: QAM SNR related fixes QAM SNR values were incorrect when the cable was disconnected. This patch extends the lookup tables to ensure correct values are being returned. Signed-off-by: Steven Toth Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/s5h1409.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c index 8dee7ec9456a..562d9208857a 100644 --- a/drivers/media/dvb/frontends/s5h1409.c +++ b/drivers/media/dvb/frontends/s5h1409.c @@ -107,7 +107,7 @@ static struct vsb_snr_tab { u16 val; u16 data; } vsb_snr_tab[] = { - { 1023, 770, }, + { 924, 300, }, { 923, 300, }, { 918, 295, }, { 915, 290, }, @@ -154,6 +154,7 @@ static struct qam64_snr_tab { u16 val; u16 data; } qam64_snr_tab[] = { + { 1, 0, }, { 12, 300, }, { 15, 290, }, { 18, 280, }, @@ -217,6 +218,7 @@ static struct qam64_snr_tab { { 95, 202, }, { 96, 201, }, { 104, 200, }, + { 255, 0, }, }; /* QAM256 SNR lookup table */ @@ -224,6 +226,7 @@ static struct qam256_snr_tab { u16 val; u16 data; } qam256_snr_tab[] = { + { 1, 0, }, { 12, 400, }, { 13, 390, }, { 15, 380, }, @@ -292,6 +295,7 @@ static struct qam256_snr_tab { { 105, 262, }, { 106, 261, }, { 110, 260, }, + { 255, 0, }, }; /* 8 bit registers, 16 bit values */ @@ -670,14 +674,15 @@ static int s5h1409_read_snr(struct dvb_frontend* fe, u16* snr) u16 reg; dprintk("%s()\n", __FUNCTION__); - reg = s5h1409_readreg(state, 0xf1) & 0x1ff; - switch(state->current_modulation) { case QAM_64: + reg = s5h1409_readreg(state, 0xf0) & 0xff; return s5h1409_qam64_lookup_snr(fe, snr, reg); case QAM_256: + reg = s5h1409_readreg(state, 0xf0) & 0xff; return s5h1409_qam256_lookup_snr(fe, snr, reg); case VSB_8: + reg = s5h1409_readreg(state, 0xf1) & 0x3ff; return s5h1409_vsb_lookup_snr(fe, snr, reg); default: break; -- cgit v1.2.3-59-g8ed1b From 98934def70b48dac74fac3738b78ab2d1a28edda Mon Sep 17 00:00:00 2001 From: William Lee Irwin III Date: Wed, 12 Dec 2007 03:56:55 -0800 Subject: ACPI: video_device_list corruption The ->cap fields of struct acpi_video_device and struct acpi_video_bus are 1B each, not 4B. The oversized memset()'s corrupted the subsequent list_head fields. This resulted in silent corruption without CONFIG_DEBUG_LIST and BUG's with it. This patch uses sizeof() to pass the proper bounds to the memset() calls and thereby correct the bugs. Signed-off-by: William Irwin Acked-by: Mikael Pettersson Signed-off-by: Len Brown --- drivers/acpi/video.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 44a0d9ba9bd6..bd77e81e81c1 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -577,7 +577,7 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) struct acpi_video_device_brightness *br = NULL; - memset(&device->cap, 0, 4); + memset(&device->cap, 0, sizeof(device->cap)); if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_ADR", &h_dummy1))) { device->cap._ADR = 1; @@ -697,7 +697,7 @@ static void acpi_video_bus_find_cap(struct acpi_video_bus *video) { acpi_handle h_dummy1; - memset(&video->cap, 0, 4); + memset(&video->cap, 0, sizeof(video->cap)); if (ACPI_SUCCESS(acpi_get_handle(video->device->handle, "_DOS", &h_dummy1))) { video->cap._DOS = 1; } -- cgit v1.2.3-59-g8ed1b From ffada8913e39e6fd35e95d7040ccac57b45812c9 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 13 Dec 2007 08:32:26 +0000 Subject: ACPI: fix modpost warnings for sn2_defconfig: WARNING: vmlinux.o(.text+0x4b8601): Section mismatch: reference to .init.data:node_to_pxm_map (between '__acpi_map_pxm_to_node' and 'acpi_get_pxm') WARNING: vmlinux.o(.text+0x4b8741): Section mismatch: reference to .init.data:pxm_to_node_map (between 'acpi_map_pxm_to_node' and 'acpi_get_node') Signed-off-by: Jan Beulich Signed-off-by: Len Brown --- drivers/acpi/numa.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c index ab04d848b19d..0822d9fc1cb4 100644 --- a/drivers/acpi/numa.c +++ b/drivers/acpi/numa.c @@ -38,9 +38,9 @@ ACPI_MODULE_NAME("numa"); static nodemask_t nodes_found_map = NODE_MASK_NONE; /* maps to convert between proximity domain and logical node ID */ -static int __cpuinitdata pxm_to_node_map[MAX_PXM_DOMAINS] +static int pxm_to_node_map[MAX_PXM_DOMAINS] = { [0 ... MAX_PXM_DOMAINS - 1] = NID_INVAL }; -static int __cpuinitdata node_to_pxm_map[MAX_NUMNODES] +static int node_to_pxm_map[MAX_NUMNODES] = { [0 ... MAX_NUMNODES - 1] = PXM_INVAL }; int pxm_to_node(int pxm) -- cgit v1.2.3-59-g8ed1b From 56a185b43be05e48da7428e6a1d3e2585b232b1d Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Thu, 13 Dec 2007 12:14:09 -0200 Subject: ACPI: thinkpad-acpi: fix lenovo keymap for brightness Starting in 2.6.23... Several reports from X60 users complained that the default Lenovo keymap issuing EV_KEY KEY_BRIGHTNESS_UP/DOWN input events caused major issues when the proper brightness support through ACPI video.c was loaded. Therefore, remove the generation of these events by default, which is the right thing for T60, X60, R60, T61, X61 and R61 with their latest BIOSes. Distros that want to misuse these events into OSD reporting (which requires an ugly hack from hell in HAL) are welcome to set up the key map they need through HAL. That way, we don't break everyone else's systems. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/misc/thinkpad_acpi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index ab23a3221585..cf56647a6ca4 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -987,9 +987,9 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) KEY_UNKNOWN, /* 0x0C: FN+BACKSPACE */ KEY_UNKNOWN, /* 0x0D: FN+INSERT */ KEY_UNKNOWN, /* 0x0E: FN+DELETE */ - KEY_BRIGHTNESSUP, /* 0x0F: FN+HOME (brightness up) */ + KEY_RESERVED, /* 0x0F: FN+HOME (brightness up) */ /* Scan codes 0x10 to 0x1F: Extended ACPI HKEY hot keys */ - KEY_BRIGHTNESSDOWN, /* 0x10: FN+END (brightness down) */ + KEY_RESERVED, /* 0x10: FN+END (brightness down) */ KEY_RESERVED, /* 0x11: FN+PGUP (thinklight toggle) */ KEY_UNKNOWN, /* 0x12: FN+PGDOWN */ KEY_ZOOM, /* 0x13: FN+SPACE (zoom) */ -- cgit v1.2.3-59-g8ed1b From 075b9cd66236191e8f5ce1668e0a601caa8c3570 Mon Sep 17 00:00:00 2001 From: Jochen Friedrich Date: Thu, 22 Nov 2007 17:53:47 +0100 Subject: [POWERPC] Fix typo #ifdef -> #ifndef fpi->cp_command should be overwritten only if CONFIG_PPC_CPM_NEW_BINDING is NOT set. Otherwise it is already set from the device tree. Signed-off-by: Jochen Friedrich Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Vitaly Bordug Signed-off-by: Kumar Gala --- drivers/net/fs_enet/mac-scc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/fs_enet/mac-scc.c b/drivers/net/fs_enet/mac-scc.c index 03134f47a4eb..48f2f3005935 100644 --- a/drivers/net/fs_enet/mac-scc.c +++ b/drivers/net/fs_enet/mac-scc.c @@ -158,7 +158,7 @@ static int setup_data(struct net_device *dev) { struct fs_enet_private *fep = netdev_priv(dev); -#ifdef CONFIG_PPC_CPM_NEW_BINDING +#ifndef CONFIG_PPC_CPM_NEW_BINDING struct fs_platform_info *fpi = fep->fpi; fep->scc.idx = fs_get_scc_index(fpi->fs_no); -- cgit v1.2.3-59-g8ed1b From 9ac68d379e73e469b62149ee2dcc19547d3d992c Mon Sep 17 00:00:00 2001 From: Jochen Friedrich Date: Thu, 22 Nov 2007 17:53:54 +0100 Subject: [POWERPC] Kill non-existent symbols from ksyms and commproc.h Remove exports of __res and cpm_install_handler/cpm_free_handler. Remove cpm_install_handler/cpm_free_handler from the commproc.h as well. Both were used for ARCH=ppc and aren't defined for ARCH=powerpc. CC arch/powerpc/kernel/ppc_ksyms.o arch/powerpc/kernel/ppc_ksyms.c:180: error: '__res' undeclared here (not in a function) arch/powerpc/kernel/ppc_ksyms.c:180: warning: type defaults to 'int' in declaration of '__res' make[1]: *** [arch/powerpc/kernel/ppc_ksyms.o] Error 1 make: *** [arch/powerpc/kernel] Error 2 LD .tmp_vmlinux1 arch/powerpc/kernel/built-in.o:(__ksymtab+0x198): undefined reference to `cpm_free_handler' arch/powerpc/kernel/built-in.o:(__ksymtab+0x1a0): undefined reference to `cpm_install_handler' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Jochen Friedrich Signed-off-by: Andrew Morton Signed-off-by: Vitaly Bordug Signed-off-by: Kumar Gala --- arch/powerpc/kernel/ppc_ksyms.c | 12 ------------ include/asm-powerpc/commproc.h | 3 --- 2 files changed, 15 deletions(-) diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index c6b1aa3efbb9..13ebeb2d71e6 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -45,10 +45,6 @@ #include #include -#ifdef CONFIG_8xx -#include -#endif - #ifdef CONFIG_PPC64 EXPORT_SYMBOL(local_irq_restore); #endif @@ -172,14 +168,6 @@ EXPORT_SYMBOL(console_drivers); EXPORT_SYMBOL(cacheable_memcpy); #endif -#ifdef CONFIG_8xx -EXPORT_SYMBOL(cpm_install_handler); -EXPORT_SYMBOL(cpm_free_handler); -#endif /* CONFIG_8xx */ -#if defined(CONFIG_8xx) -EXPORT_SYMBOL(__res); -#endif - #ifdef CONFIG_PPC32 EXPORT_SYMBOL(next_mmu_context); EXPORT_SYMBOL(set_context); diff --git a/include/asm-powerpc/commproc.h b/include/asm-powerpc/commproc.h index a2328b8addd8..2ee59d7b335c 100644 --- a/include/asm-powerpc/commproc.h +++ b/include/asm-powerpc/commproc.h @@ -698,9 +698,6 @@ typedef struct risc_timer_pram { #define CICR_IEN ((uint)0x00000080) /* Int. enable */ #define CICR_SPS ((uint)0x00000001) /* SCC Spread */ -extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id); -extern void cpm_free_handler(int vec); - #define IMAP_ADDR (get_immrbase()) #define CPM_PIN_INPUT 0 -- cgit v1.2.3-59-g8ed1b From cd2150bca97822609fabbb77063a1a20149f5657 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Wed, 12 Dec 2007 16:54:32 -0600 Subject: [POWRPC] CPM2: Eliminate section mismatch warning in cpm2_reset(). Signed-off-by: Scott Wood Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/cpm2_common.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/powerpc/sysdev/cpm2_common.c b/arch/powerpc/sysdev/cpm2_common.c index 859362fecb7c..c1d824032020 100644 --- a/arch/powerpc/sysdev/cpm2_common.c +++ b/arch/powerpc/sysdev/cpm2_common.c @@ -61,8 +61,7 @@ cpm2_map_t __iomem *cpm2_immr; of space for CPM as it is larger than on PQ2 */ -void -cpm2_reset(void) +void __init cpm2_reset(void) { #ifdef CONFIG_PPC_85xx cpm2_immr = ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE); -- cgit v1.2.3-59-g8ed1b From e8b5f43f7b572a898c7b17e9949b26e7362e7f31 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Mon, 10 Dec 2007 11:10:45 -0600 Subject: [POWERPC] 82xx: mpc8272ads, pq2fads: Update defconfig with CONFIG_FS_ENET_MDIO_FCC This was recently made configurable, and needs to be set for these boards. Signed-off-by: Scott Wood Signed-off-by: Kumar Gala --- arch/powerpc/configs/mpc8272_ads_defconfig | 6 +++--- arch/powerpc/configs/pq2fads_defconfig | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig index a31b7a030a6b..5eae305215dc 100644 --- a/arch/powerpc/configs/mpc8272_ads_defconfig +++ b/arch/powerpc/configs/mpc8272_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:30 2007 +# Linux kernel version: 2.6.24-rc5 +# Thu Dec 13 22:40:57 2007 # # CONFIG_PPC64 is not set @@ -491,7 +491,7 @@ CONFIG_MII=y CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y -# CONFIG_FS_ENET_MDIO_FCC is not set +CONFIG_FS_ENET_MDIO_FCC=y CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig index 142d206d6870..a3bfbb65a933 100644 --- a/arch/powerpc/configs/pq2fads_defconfig +++ b/arch/powerpc/configs/pq2fads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:49:09 2007 +# Linux kernel version: 2.6.24-rc5 +# Thu Dec 13 22:39:18 2007 # # CONFIG_PPC64 is not set @@ -548,7 +548,7 @@ CONFIG_MII=y CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y -# CONFIG_FS_ENET_MDIO_FCC is not set +CONFIG_FS_ENET_MDIO_FCC=y CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set -- cgit v1.2.3-59-g8ed1b From 88f0178e6ec2c73167de973e4af86905b4dbfd45 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Wed, 12 Dec 2007 14:58:12 +1100 Subject: [POWERPC] iSeries: don't printk with HV spinlock held Printk was observed to hang during module unload due to a limited window of characters that may be sent to the hypervisor. The window only reexpands when we receive an ack from the HV and the spinlock here prevents us from ever processing that ack. This fixes it by dropping the lock before doing the printk, then looping back to the top to reacquire the lock. Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/iseries/lpevents.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/iseries/lpevents.c b/arch/powerpc/platforms/iseries/lpevents.c index 34bdbbe3ce59..275f49449839 100644 --- a/arch/powerpc/platforms/iseries/lpevents.c +++ b/arch/powerpc/platforms/iseries/lpevents.c @@ -121,6 +121,7 @@ void process_hvlpevents(void) { struct HvLpEvent * event; + restart: /* If we have recursed, just return */ if (!spin_trylock(&hvlpevent_queue.hq_lock)) return; @@ -146,8 +147,20 @@ void process_hvlpevents(void) if (event->xType < HvLpEvent_Type_NumTypes && lpEventHandler[event->xType]) lpEventHandler[event->xType](event); - else - printk(KERN_INFO "Unexpected Lp Event type=%d\n", event->xType ); + else { + u8 type = event->xType; + + /* + * Don't printk in the spinlock as printk + * may require ack events form the HV to send + * any characters there. + */ + hvlpevent_clear_valid(event); + spin_unlock(&hvlpevent_queue.hq_lock); + printk(KERN_INFO + "Unexpected Lp Event type=%d\n", type); + goto restart; + } hvlpevent_clear_valid(event); } else if (hvlpevent_queue.hq_overflow_pending) -- cgit v1.2.3-59-g8ed1b From c89686210542f6946e48a907772a356b9fce03f0 Mon Sep 17 00:00:00 2001 From: Liu Yu Date: Mon, 10 Dec 2007 13:00:52 +0800 Subject: [POWERPC] Fix rounding bug in emulation for double float operating This patch fixes rounding bug in emulation for double float operating on PowerPC platform. When pack double float operand, it need to truncate the tail due to the limited precision. If the truncated part is not zero, the last bit of work bit (totally 3 bits) need to '|' 1. This patch is completed in _FP_FRAC_SRS_2(X,N,sz) (arch/powerpc/math-emu/op-2.h). Originally the code leftwards rotates the operand to just keep the truncated part, then check whether it is zero. However, the number it rotates is not correct when N is not smaller than _FP_W_TYPE_SIZE, and it will cause the work bit '|' 1 in the improper case. This patch fixes this issue. Signed-off-by: Liu Yu Signed-off-by: Kumar Gala --- arch/powerpc/math-emu/op-2.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/math-emu/op-2.h b/arch/powerpc/math-emu/op-2.h index b9b06b4c6ea1..7d6f17cc2929 100644 --- a/arch/powerpc/math-emu/op-2.h +++ b/arch/powerpc/math-emu/op-2.h @@ -59,7 +59,8 @@ else \ { \ X##_f0 = (X##_f1 >> ((N) - _FP_W_TYPE_SIZE) | \ - (((X##_f1 << (sz - (N))) | X##_f0) != 0)); \ + (((X##_f1 << (2 * _FP_W_TYPE_SIZE - (N))) | \ + X##_f0) != 0)); \ X##_f1 = 0; \ } \ } while (0) -- cgit v1.2.3-59-g8ed1b From eb8dc843fc3c0dbac553ec79d7e5b4d8339aeb3d Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Mon, 10 Dec 2007 15:17:43 +1100 Subject: [POWERPC] Make PS3_SYS_MANAGER default y, not m Currently it's impossible to build a ps3_defconfig which will reboot without modules installed. This makes it all too easy to find yourself with a PS3 that won't reboot. This is because the system manager driver, which provides the reboot mechanism, is only selectable if PS3_ADVANCED is set, else it defaults to m. In ps3_defconfig PS3_ADVANCED is not set, therefore the system manager is built as a module. It would be desirable IMHO for the defconfig to produce a kernel that boots and reboots, without needing modules to be installed. Signed-off-by: Michael Ellerman Acked-by: Geoff Levand Signed-off-by: Paul Mackerras --- arch/powerpc/configs/ps3_defconfig | 2 +- arch/powerpc/platforms/ps3/Kconfig | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig index 5bd547ecd60a..0b5469fb6e0f 100644 --- a/arch/powerpc/configs/ps3_defconfig +++ b/arch/powerpc/configs/ps3_defconfig @@ -157,7 +157,7 @@ CONFIG_PS3_HTAB_SIZE=20 CONFIG_PS3_USE_LPAR_ADDR=y CONFIG_PS3_VUART=y CONFIG_PS3_PS3AV=y -CONFIG_PS3_SYS_MANAGER=m +CONFIG_PS3_SYS_MANAGER=y CONFIG_PS3_STORAGE=y CONFIG_PS3_DISK=y CONFIG_PS3_ROM=y diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig index 67144d1d1405..298f1c9679fb 100644 --- a/arch/powerpc/platforms/ps3/Kconfig +++ b/arch/powerpc/platforms/ps3/Kconfig @@ -91,7 +91,7 @@ config PS3_SYS_MANAGER depends on PPC_PS3 tristate "PS3 System Manager driver" if PS3_ADVANCED select PS3_VUART - default m + default y help Include support for the PS3 System Manager. -- cgit v1.2.3-59-g8ed1b From 18ca38d26f65c849af109eb911295c7dde71ce3b Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Sun, 9 Dec 2007 21:22:04 +0900 Subject: [MIPS] time: Set up Cobalt's mips_hpt_frequency Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/cobalt/time.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) diff --git a/arch/mips/cobalt/time.c b/arch/mips/cobalt/time.c index fa819fccd5db..4a570e7145fe 100644 --- a/arch/mips/cobalt/time.c +++ b/arch/mips/cobalt/time.c @@ -27,9 +27,28 @@ void __init plat_time_init(void) { + u32 start, end; + int i = HZ / 10; + setup_pit_timer(); gt641xx_set_base_clock(GT641XX_BASE_CLOCK); - mips_timer_state = gt641xx_timer0_state; + /* + * MIPS counter frequency is measured during a 100msec interval + * using GT64111 timer0. + */ + while (!gt641xx_timer0_state()) + ; + + start = read_c0_count(); + + while (i--) + while (!gt641xx_timer0_state()) + ; + + end = read_c0_count(); + + mips_hpt_frequency = (end - start) * 10; + printk(KERN_INFO "MIPS counter frequency %dHz\n", mips_hpt_frequency); } -- cgit v1.2.3-59-g8ed1b From dd99d9661c72fe251b842705f2e7cfaa4918a13c Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 10 Dec 2007 20:28:51 +0300 Subject: [MIPS] Alchemy: fix PCI resource conflict ... by getting the PCI resources back into the 32-bit range -- there's no need therefore for CONFIG_RESOURCES_64BIT either. This makes Alchemy PCI work again while currently the kernel skips the bus scan. Signed-off-by: Sergei Shtylyov Signed-off-by: Ralf Baechle --- arch/mips/au1000/Kconfig | 9 --------- arch/mips/au1000/common/pci.c | 8 ++++---- include/asm-mips/mach-au1x00/au1000.h | 9 +++++---- 3 files changed, 9 insertions(+), 17 deletions(-) diff --git a/arch/mips/au1000/Kconfig b/arch/mips/au1000/Kconfig index 05d1354aad3a..1fe97cccead1 100644 --- a/arch/mips/au1000/Kconfig +++ b/arch/mips/au1000/Kconfig @@ -7,7 +7,6 @@ config MIPS_MTX1 bool "4G Systems MTX-1 board" select DMA_NONCOHERENT select HW_HAS_PCI - select RESOURCES_64BIT if PCI select SOC_AU1500 select SYS_SUPPORTS_LITTLE_ENDIAN @@ -22,7 +21,6 @@ config MIPS_DB1000 select SOC_AU1000 select DMA_NONCOHERENT select HW_HAS_PCI - select RESOURCES_64BIT if PCI select SYS_SUPPORTS_LITTLE_ENDIAN config MIPS_DB1100 @@ -44,7 +42,6 @@ config MIPS_DB1500 select DMA_NONCOHERENT select HW_HAS_PCI select MIPS_DISABLE_OBSOLETE_IDE - select RESOURCES_64BIT if PCI select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN @@ -54,7 +51,6 @@ config MIPS_DB1550 select HW_HAS_PCI select DMA_NONCOHERENT select MIPS_DISABLE_OBSOLETE_IDE - select RESOURCES_64BIT if PCI select SYS_SUPPORTS_LITTLE_ENDIAN config MIPS_MIRAGE @@ -68,7 +64,6 @@ config MIPS_PB1000 select SOC_AU1000 select DMA_NONCOHERENT select HW_HAS_PCI - select RESOURCES_64BIT if PCI select SWAP_IO_SPACE select SYS_SUPPORTS_LITTLE_ENDIAN @@ -77,7 +72,6 @@ config MIPS_PB1100 select SOC_AU1100 select DMA_NONCOHERENT select HW_HAS_PCI - select RESOURCES_64BIT if PCI select SWAP_IO_SPACE select SYS_SUPPORTS_LITTLE_ENDIAN @@ -86,7 +80,6 @@ config MIPS_PB1200 select SOC_AU1200 select DMA_NONCOHERENT select MIPS_DISABLE_OBSOLETE_IDE - select RESOURCES_64BIT if PCI select SYS_SUPPORTS_LITTLE_ENDIAN config MIPS_PB1500 @@ -94,7 +87,6 @@ config MIPS_PB1500 select SOC_AU1500 select DMA_NONCOHERENT select HW_HAS_PCI - select RESOURCES_64BIT if PCI select SYS_SUPPORTS_LITTLE_ENDIAN config MIPS_PB1550 @@ -103,7 +95,6 @@ config MIPS_PB1550 select DMA_NONCOHERENT select HW_HAS_PCI select MIPS_DISABLE_OBSOLETE_IDE - select RESOURCES_64BIT if PCI select SYS_SUPPORTS_LITTLE_ENDIAN config MIPS_XXS1500 diff --git a/arch/mips/au1000/common/pci.c b/arch/mips/au1000/common/pci.c index 9be99a68932a..6fa70a36a250 100644 --- a/arch/mips/au1000/common/pci.c +++ b/arch/mips/au1000/common/pci.c @@ -39,15 +39,15 @@ /* TBD */ static struct resource pci_io_resource = { - .start = (resource_size_t)PCI_IO_START, - .end = (resource_size_t)PCI_IO_END, + .start = PCI_IO_START, + .end = PCI_IO_END, .name = "PCI IO space", .flags = IORESOURCE_IO }; static struct resource pci_mem_resource = { - .start = (resource_size_t)PCI_MEM_START, - .end = (resource_size_t)PCI_MEM_END, + .start = PCI_MEM_START, + .end = PCI_MEM_END, .name = "PCI memory space", .flags = IORESOURCE_MEM }; diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h index bf7701243d71..cb18af989645 100644 --- a/include/asm-mips/mach-au1x00/au1000.h +++ b/include/asm-mips/mach-au1x00/au1000.h @@ -1680,10 +1680,11 @@ enum soc_au1200_ints { #define Au1500_PCI_MEM_START 0x440000000ULL #define Au1500_PCI_MEM_END 0x44FFFFFFFULL -#define PCI_IO_START (Au1500_PCI_IO_START + 0x1000) -#define PCI_IO_END (Au1500_PCI_IO_END) -#define PCI_MEM_START (Au1500_PCI_MEM_START) -#define PCI_MEM_END (Au1500_PCI_MEM_END) +#define PCI_IO_START 0x00001000 +#define PCI_IO_END 0x000FFFFF +#define PCI_MEM_START 0x40000000 +#define PCI_MEM_END 0x4FFFFFFF + #define PCI_FIRST_DEVFN (0<<3) #define PCI_LAST_DEVFN (19<<3) -- cgit v1.2.3-59-g8ed1b From b87bb40b62310328e908d580e013e0575b05886c Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 10 Dec 2007 20:36:50 +0300 Subject: [MIPS] Alchemy: fix off by two error in __fixup_bigphys_addr() the PCI specific code in this function doesn't check for the address range being under the upper bound of the PCI memory window correctly -- fix this, somewhat beautifying the code around the check, while at it... Signed-off-by: Sergei Shtylyov Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/setup.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c index a90d425d4651..d885e3848ec6 100644 --- a/arch/mips/au1000/common/setup.c +++ b/arch/mips/au1000/common/setup.c @@ -137,12 +137,11 @@ phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size) #ifdef CONFIG_PCI { - u32 start, end; + u32 start = (u32)Au1500_PCI_MEM_START; + u32 end = (u32)Au1500_PCI_MEM_END; - start = (u32)Au1500_PCI_MEM_START; - end = (u32)Au1500_PCI_MEM_END; - /* check for pci memory window */ - if ((phys_addr >= start) && ((phys_addr + size) < end)) + /* Check for PCI memory window */ + if (phys_addr >= start && (phys_addr + size - 1) <= end) return (phys_t) ((phys_addr - start) + Au1500_PCI_MEM_START); } -- cgit v1.2.3-59-g8ed1b From 40c7869b693b18412491fdcff64682215b739f9e Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 11 Dec 2007 19:38:12 +0000 Subject: [MIPS] Atlas, Malta: Don't free firmware memory on free_initmem. A proper fix for this needs to turn a few MIPS-generic bits which I don't want at this stage. Signed-off-by: Ralf Baechle --- arch/mips/mips-boards/generic/memory.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/mips/mips-boards/generic/memory.c b/arch/mips/mips-boards/generic/memory.c index dc272c188233..2c5c27c8e86d 100644 --- a/arch/mips/mips-boards/generic/memory.c +++ b/arch/mips/mips-boards/generic/memory.c @@ -169,6 +169,7 @@ void __init prom_meminit(void) void __init prom_free_prom_memory(void) { +#if 0 /* for now ... */ unsigned long addr; int i; @@ -180,4 +181,5 @@ void __init prom_free_prom_memory(void) free_init_pages("prom memory", addr, addr + boot_mem_map.map[i].size); } +#endif } -- cgit v1.2.3-59-g8ed1b From d20e47e153dcfddca5a066ff0f8da2d1104d08ea Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 11 Dec 2007 19:49:24 +0000 Subject: [MIPS] PCI: Make pcibios_fixup_device_resources ignore legacy resources. There might be other reasons why a resource might be marked as fixed such as a PCI UART holding the system console but until we use IORESOURCE_PCI_FIXED that way also this will work. Signed-off-by: Ralf Baechle --- arch/mips/pci/pci.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index 589b745d822a..6e6981fd7934 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -242,6 +242,8 @@ static void pcibios_fixup_device_resources(struct pci_dev *dev, for (i = 0; i < PCI_NUM_RESOURCES; i++) { if (!dev->resource[i].start) continue; + if (dev->resource[i].flags & IORESOURCE_PCI_FIXED) + continue; if (dev->resource[i].flags & IORESOURCE_IO) offset = hose->io_offset; else if (dev->resource[i].flags & IORESOURCE_MEM) -- cgit v1.2.3-59-g8ed1b From 4037500ebcfd172a15aed40caa847c52e9906712 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 14 Dec 2007 00:05:34 +0000 Subject: [MIPS] time: Delete weak definition of plat_time_init() due to gcc bug. Frank Rowand reports: > In linux-2.6.24-rc4 the Toshiba RBTX4927 hangs on boot. > > The cause is that plat_time_init() from arch/mips/tx4927/common/ > tx4927_setup.c does not override the __weak plat_time_init() from > arch/mips/kernel/time.c. This is due to a compiler bug in gcc 4.1.1. The > bug is reported to not exist in earlier versions of gcc, and to be fixed in > 4.1.2. The problem is that the __weak plat_time_init() is empty and thus > gets optimized out of existence (thus the linker is never given the option > to replace the __weak function). [ He meant the call to plat_time_init() from time_init() gets optimized away ] > For more info on the gcc bug see > > http://gcc.gnu.org/bugzilla/show_bug.cgi?id=27781 > > The attached patch is one workaround. Another possible workaround [ His patch adds -fno-unit-at-a-time for time.c ] > would be to change the __weak plat_time_init() to be a non-empty > function. The __weak definition of plat_time_init was only ever meant to be a migration helper to keep platforms that don't have a plat_time_init compiling. A few greps says that all platforms now supply their own plat_time_init() so the weak definition is no longer needed. So I instead delete it. Signed-off-by: Ralf Baechle --- arch/mips/kernel/time.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index 52075426c373..1ecfbb7eba6c 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -109,10 +109,6 @@ void __cpuinit clockevent_set_clock(struct clock_event_device *cd, cd->mult = (u32) temp; } -void __init __weak plat_time_init(void) -{ -} - /* * This function exists in order to cause an error due to a duplicate * definition if platform code should have its own implementation. The hook -- cgit v1.2.3-59-g8ed1b From bbaf238b5f910f8f3dda4b96cf844f50b2dcc6fa Mon Sep 17 00:00:00 2001 From: Chris Dearman Date: Thu, 13 Dec 2007 22:42:19 +0000 Subject: [MIPS] Ensure that ST0_FR is never set on a 32 bit kernel Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle --- arch/mips/kernel/process.c | 3 +-- arch/mips/kernel/traps.c | 6 +++--- 2 files changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 11cb264f59ce..2c09a442e5e5 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -77,9 +77,8 @@ void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp) unsigned long status; /* New thread loses kernel privileges. */ - status = regs->cp0_status & ~(ST0_CU0|ST0_CU1|KU_MASK); + status = regs->cp0_status & ~(ST0_CU0|ST0_CU1|ST0_FR|KU_MASK); #ifdef CONFIG_64BIT - status &= ~ST0_FR; status |= test_thread_flag(TIF_32BIT_REGS) ? 0 : ST0_FR; #endif status |= KU_USER; diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 23e73d0650a3..fcae66752972 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1317,12 +1317,12 @@ void __init per_cpu_trap_init(void) #endif if (current_cpu_data.isa_level == MIPS_CPU_ISA_IV) status_set |= ST0_XX; + if (cpu_has_dsp) + status_set |= ST0_MX; + change_c0_status(ST0_CU|ST0_MX|ST0_RE|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX, status_set); - if (cpu_has_dsp) - set_c0_status(ST0_MX); - #ifdef CONFIG_CPU_MIPSR2 if (cpu_has_mips_r2) { unsigned int enable = 0x0000000f; -- cgit v1.2.3-59-g8ed1b From e6e0a94573fb33e6e62b848a24864e6864c45464 Mon Sep 17 00:00:00 2001 From: Martin Habets Date: Fri, 14 Dec 2007 10:59:50 -0800 Subject: [SPARC32]: Silence sparc32 warnings on missing syscalls. Silence sparc32 warnings on missing syscalls, these won't be added. This patch is based on this mail: http://www.mail-archive.com/linux-arch@vger.kernel.org/msg02571.html Signed-off-by: Martin Habets Signed-off-by: David S. Miller --- include/asm-sparc/unistd.h | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/include/asm-sparc/unistd.h b/include/asm-sparc/unistd.h index 029b3e0d5e4c..0decdf763716 100644 --- a/include/asm-sparc/unistd.h +++ b/include/asm-sparc/unistd.h @@ -333,6 +333,15 @@ #define NR_SYSCALLS 315 +/* Sparc 32-bit only has the "setresuid32", "getresuid32" variants, + * it never had the plain ones and there is no value to adding those + * old versions into the syscall table. + */ +#define __IGNORE_setresuid +#define __IGNORE_getresuid +#define __IGNORE_setresgid +#define __IGNORE_getresgid + #ifdef __KERNEL__ #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR -- cgit v1.2.3-59-g8ed1b From 09f1fb41ad45bc18abe07c62f7b56560571584d1 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Sat, 8 Dec 2007 13:02:33 +0300 Subject: ACPI: SBS: Reset alarm bit Alarm bit should be cleared in order for other alarms to be sent. http://bugzilla.kernel.org/show_bug.cgi?id=9362 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/sbshc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c index 046d7c3ed356..12a1532513e3 100644 --- a/drivers/acpi/sbshc.c +++ b/drivers/acpi/sbshc.c @@ -222,6 +222,7 @@ static int smbus_alarm(void *context) if (!status.fields.alarm) return 0; mutex_lock(&hc->lock); + status.fields.alarm = 0; smb_hc_write(hc, ACPI_SMB_STATUS, status.raw); if (hc->callback) acpi_os_execute(OSL_GPE_HANDLER, acpi_smbus_callback, hc); -- cgit v1.2.3-59-g8ed1b From c2d00f2d1bf8dd721f5557b0df23729addc1898d Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Sat, 8 Dec 2007 13:02:40 +0300 Subject: ACPI: SBS: Ignore alarms coming from unknown devices http://bugzilla.kernel.org/show_bug.cgi?id=9362 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/sbs.c | 6 ------ drivers/acpi/sbshc.c | 16 ++++++++++++---- drivers/acpi/sbshc.h | 6 ++++++ 3 files changed, 18 insertions(+), 10 deletions(-) diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c index 6045cdbe176b..813ef328f743 100644 --- a/drivers/acpi/sbs.c +++ b/drivers/acpi/sbs.c @@ -54,12 +54,6 @@ #define ACPI_BATTERY_DIR_NAME "BAT%i" #define ACPI_AC_DIR_NAME "AC0" -enum acpi_sbs_device_addr { - ACPI_SBS_CHARGER = 0x9, - ACPI_SBS_MANAGER = 0xa, - ACPI_SBS_BATTERY = 0xb, -}; - #define ACPI_SBS_NOTIFY_STATUS 0x80 #define ACPI_SBS_NOTIFY_INFO 0x81 diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c index 12a1532513e3..fd40b6a1d639 100644 --- a/drivers/acpi/sbshc.c +++ b/drivers/acpi/sbshc.c @@ -202,10 +202,9 @@ int acpi_smbus_unregister_callback(struct acpi_smb_hc *hc) EXPORT_SYMBOL_GPL(acpi_smbus_unregister_callback); -static void acpi_smbus_callback(void *context) +static inline void acpi_smbus_callback(void *context) { struct acpi_smb_hc *hc = context; - if (hc->callback) hc->callback(hc->context); } @@ -214,6 +213,7 @@ static int smbus_alarm(void *context) { struct acpi_smb_hc *hc = context; union acpi_smb_status status; + u8 address; if (smb_hc_read(hc, ACPI_SMB_STATUS, &status.raw)) return 0; /* Check if it is only a completion notify */ @@ -222,10 +222,18 @@ static int smbus_alarm(void *context) if (!status.fields.alarm) return 0; mutex_lock(&hc->lock); + smb_hc_read(hc, ACPI_SMB_ALARM_ADDRESS, &address); status.fields.alarm = 0; smb_hc_write(hc, ACPI_SMB_STATUS, status.raw); - if (hc->callback) - acpi_os_execute(OSL_GPE_HANDLER, acpi_smbus_callback, hc); + /* We are only interested in events coming from known devices */ + switch (address >> 1) { + case ACPI_SBS_CHARGER: + case ACPI_SBS_MANAGER: + case ACPI_SBS_BATTERY: + acpi_os_execute(OSL_GPE_HANDLER, + acpi_smbus_callback, hc); + default:; + } mutex_unlock(&hc->lock); return 0; } diff --git a/drivers/acpi/sbshc.h b/drivers/acpi/sbshc.h index 3bda3491a97b..a57b0762dd7f 100644 --- a/drivers/acpi/sbshc.h +++ b/drivers/acpi/sbshc.h @@ -16,6 +16,12 @@ enum acpi_smb_protocol { static const u8 SMBUS_PEC = 0x80; +enum acpi_sbs_device_addr { + ACPI_SBS_CHARGER = 0x9, + ACPI_SBS_MANAGER = 0xa, + ACPI_SBS_BATTERY = 0xb, +}; + typedef void (*smbus_alarm_callback)(void *context); extern int acpi_smbus_read(struct acpi_smb_hc *hc, u8 protocol, u8 address, -- cgit v1.2.3-59-g8ed1b From 5a21e4fe587ebb793bf3a1c02755f8a845170328 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Sat, 8 Dec 2007 13:02:46 +0300 Subject: ACPI: SBS: Return rate in mW if capacity in mWh klaptopd assumes rate to be in same units as capacity. http://bugzilla.kernel.org/show_bug.cgi?id=9362 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/sbs.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c index 813ef328f743..22cb95b349e4 100644 --- a/drivers/acpi/sbs.c +++ b/drivers/acpi/sbs.c @@ -533,7 +533,7 @@ static struct proc_dir_entry *acpi_battery_dir = NULL; static inline char *acpi_battery_units(struct acpi_battery *battery) { - return acpi_battery_mode(battery) ? " mWh" : " mAh"; + return acpi_battery_mode(battery) ? " mW" : " mA"; } @@ -550,10 +550,10 @@ static int acpi_battery_read_info(struct seq_file *seq, void *offset) if (!battery->present) goto end; - seq_printf(seq, "design capacity: %i%s\n", + seq_printf(seq, "design capacity: %i%sh\n", battery->design_capacity * acpi_battery_scale(battery), acpi_battery_units(battery)); - seq_printf(seq, "last full capacity: %i%s\n", + seq_printf(seq, "last full capacity: %i%sh\n", battery->full_charge_capacity * acpi_battery_scale(battery), acpi_battery_units(battery)); seq_printf(seq, "battery technology: rechargeable\n"); @@ -584,7 +584,7 @@ static int acpi_battery_read_state(struct seq_file *seq, void *offset) { struct acpi_battery *battery = seq->private; struct acpi_sbs *sbs = battery->sbs; - int result = 0; + int rate; mutex_lock(&sbs->lock); seq_printf(seq, "present: %s\n", @@ -598,9 +598,12 @@ static int acpi_battery_read_state(struct seq_file *seq, void *offset) seq_printf(seq, "charging state: %s\n", (battery->current_now < 0) ? "discharging" : ((battery->current_now > 0) ? "charging" : "charged")); - seq_printf(seq, "present rate: %d mA\n", - abs(battery->current_now) * acpi_battery_ipscale(battery)); - seq_printf(seq, "remaining capacity: %i%s\n", + rate = abs(battery->current_now) * acpi_battery_ipscale(battery); + rate *= (acpi_battery_mode(battery))?(battery->voltage_now * + acpi_battery_vscale(battery)/1000):1; + seq_printf(seq, "present rate: %d%s\n", rate, + acpi_battery_units(battery)); + seq_printf(seq, "remaining capacity: %i%sh\n", battery->capacity_now * acpi_battery_scale(battery), acpi_battery_units(battery)); seq_printf(seq, "present voltage: %i mV\n", @@ -608,7 +611,7 @@ static int acpi_battery_read_state(struct seq_file *seq, void *offset) end: mutex_unlock(&sbs->lock); - return result; + return 0; } static int acpi_battery_state_open_fs(struct inode *inode, struct file *file) @@ -632,7 +635,7 @@ static int acpi_battery_read_alarm(struct seq_file *seq, void *offset) acpi_battery_get_alarm(battery); seq_printf(seq, "alarm: "); if (battery->alarm_capacity) - seq_printf(seq, "%i%s\n", + seq_printf(seq, "%i%sh\n", battery->alarm_capacity * acpi_battery_scale(battery), acpi_battery_units(battery)); -- cgit v1.2.3-59-g8ed1b From 798fdd07fcc131f396e521febb4a7d42559bf4b5 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 7 Dec 2007 15:22:15 -0800 Subject: sky2: RX lockup fix I'm using a Marvell 88E8062 on a custom PPC64 blade and ran into RX lockups while validating the sky2 driver. The receive MAC FIFO would become stuck during testing with high traffic. One port of the 88E8062 would lockup, while the other port remained functional. Re-inserting the sky2 module would not fix the problem - only a power cycle would. I looked over Marvell's most recent sk98lin driver and it looks like they had a "workaround" for the Yukon XL that the sky2 doesn't have yet. The sk98lin driver disables the RX MAC FIFO flush feature for all revisions of the Yukon XL. According to skgeinit.c of the sk98lin driver, "Flushing must be enabled (needed for ASF see dev. #4.29), but the flushing mask should be disabled (see dev. #4.115)". Nice. I implemented this same change in the sky2 driver and verified that the RX lockup I was seeing was resolved. Signed-off-by: Peter Tyser Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 6197afb3ed83..a74fc11a6482 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -822,8 +822,13 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), rx_reg); - /* Flush Rx MAC FIFO on any flow control or error */ - sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR); + if (hw->chip_id == CHIP_ID_YUKON_XL) { + /* Hardware errata - clear flush mask */ + sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), 0); + } else { + /* Flush Rx MAC FIFO on any flow control or error */ + sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR); + } /* Set threshold to 0xa (64 bytes) + 1 to workaround pause bug */ reg = RX_GMF_FL_THR_DEF + 1; -- cgit v1.2.3-59-g8ed1b From 14c9d9b03bb8ec63c77aebddea9a6f730f1b62d5 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 9 Dec 2007 16:50:47 +0000 Subject: sundance fixes * all places where we assign ->addr get cpu_to_le32(pci_map_single(....)), so we ought to convert back to host-endian before doing pci_unmap_single() et.al. * poisoning addresses in netdev_close() should be done _after_ unmapping them, not before it... Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/net/sundance.c | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c index ff98f5d597f1..0a6186d4a48e 100644 --- a/drivers/net/sundance.c +++ b/drivers/net/sundance.c @@ -340,9 +340,9 @@ enum mac_ctrl1_bits { /* Note that using only 32 bit fields simplifies conversion to big-endian architectures. */ struct netdev_desc { - u32 next_desc; - u32 status; - struct desc_frag { u32 addr, length; } frag[1]; + __le32 next_desc; + __le32 status; + struct desc_frag { __le32 addr, length; } frag[1]; }; /* Bits in netdev_desc.status */ @@ -495,8 +495,8 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev, goto err_out_res; for (i = 0; i < 3; i++) - ((u16 *)dev->dev_addr)[i] = - le16_to_cpu(eeprom_read(ioaddr, i + EEPROM_SA_OFFSET)); + ((__le16 *)dev->dev_addr)[i] = + cpu_to_le16(eeprom_read(ioaddr, i + EEPROM_SA_OFFSET)); memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); dev->base_addr = (unsigned long)ioaddr; @@ -1090,8 +1090,8 @@ reset_tx (struct net_device *dev) skb = np->tx_skbuff[i]; if (skb) { pci_unmap_single(np->pci_dev, - np->tx_ring[i].frag[0].addr, skb->len, - PCI_DMA_TODEVICE); + le32_to_cpu(np->tx_ring[i].frag[0].addr), + skb->len, PCI_DMA_TODEVICE); if (irq) dev_kfree_skb_irq (skb); else @@ -1214,7 +1214,7 @@ static irqreturn_t intr_handler(int irq, void *dev_instance) skb = np->tx_skbuff[entry]; /* Free the original skb. */ pci_unmap_single(np->pci_dev, - np->tx_ring[entry].frag[0].addr, + le32_to_cpu(np->tx_ring[entry].frag[0].addr), skb->len, PCI_DMA_TODEVICE); dev_kfree_skb_irq (np->tx_skbuff[entry]); np->tx_skbuff[entry] = NULL; @@ -1233,7 +1233,7 @@ static irqreturn_t intr_handler(int irq, void *dev_instance) skb = np->tx_skbuff[entry]; /* Free the original skb. */ pci_unmap_single(np->pci_dev, - np->tx_ring[entry].frag[0].addr, + le32_to_cpu(np->tx_ring[entry].frag[0].addr), skb->len, PCI_DMA_TODEVICE); dev_kfree_skb_irq (np->tx_skbuff[entry]); np->tx_skbuff[entry] = NULL; @@ -1311,19 +1311,19 @@ static void rx_poll(unsigned long data) && (skb = dev_alloc_skb(pkt_len + 2)) != NULL) { skb_reserve(skb, 2); /* 16 byte align the IP header */ pci_dma_sync_single_for_cpu(np->pci_dev, - desc->frag[0].addr, + le32_to_cpu(desc->frag[0].addr), np->rx_buf_sz, PCI_DMA_FROMDEVICE); skb_copy_to_linear_data(skb, np->rx_skbuff[entry]->data, pkt_len); pci_dma_sync_single_for_device(np->pci_dev, - desc->frag[0].addr, + le32_to_cpu(desc->frag[0].addr), np->rx_buf_sz, PCI_DMA_FROMDEVICE); skb_put(skb, pkt_len); } else { pci_unmap_single(np->pci_dev, - desc->frag[0].addr, + le32_to_cpu(desc->frag[0].addr), np->rx_buf_sz, PCI_DMA_FROMDEVICE); skb_put(skb = np->rx_skbuff[entry], pkt_len); @@ -1709,23 +1709,23 @@ static int netdev_close(struct net_device *dev) /* Free all the skbuffs in the Rx queue. */ for (i = 0; i < RX_RING_SIZE; i++) { np->rx_ring[i].status = 0; - np->rx_ring[i].frag[0].addr = 0xBADF00D0; /* An invalid address. */ skb = np->rx_skbuff[i]; if (skb) { pci_unmap_single(np->pci_dev, - np->rx_ring[i].frag[0].addr, np->rx_buf_sz, - PCI_DMA_FROMDEVICE); + le32_to_cpu(np->rx_ring[i].frag[0].addr), + np->rx_buf_sz, PCI_DMA_FROMDEVICE); dev_kfree_skb(skb); np->rx_skbuff[i] = NULL; } + np->rx_ring[i].frag[0].addr = cpu_to_le32(0xBADF00D0); /* poison */ } for (i = 0; i < TX_RING_SIZE; i++) { np->tx_ring[i].next_desc = 0; skb = np->tx_skbuff[i]; if (skb) { pci_unmap_single(np->pci_dev, - np->tx_ring[i].frag[0].addr, skb->len, - PCI_DMA_TODEVICE); + le32_to_cpu(np->tx_ring[i].frag[0].addr), + skb->len, PCI_DMA_TODEVICE); dev_kfree_skb(skb); np->tx_skbuff[i] = NULL; } -- cgit v1.2.3-59-g8ed1b From 813820b9b9adb98d4ad3cd7434eb662b0fc15684 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 9 Dec 2007 17:00:54 +0000 Subject: starfire VLAN fix Recognized VLAN ids are set via writew(), should go in host-endian. That's a long-standing bug, BTW - see http://lkml.org/lkml/2004/2/27/180 for example. What happens is that card gets VLAN id table populated by byteswapped values on little-endian boxen (so 257 works as expected, 256 and 258 do not, etc.). Bug is easily reproduced, patch fixes it. Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/net/starfire.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index bcc430bd9e49..6e00dc857afa 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -1742,7 +1742,7 @@ static void set_rx_mode(struct net_device *dev) if (vlan_group_get_device(np->vlgrp, i)) { if (vlan_count >= 32) break; - writew(cpu_to_be16(i), filter_addr); + writew(i, filter_addr); filter_addr += 16; vlan_count++; } -- cgit v1.2.3-59-g8ed1b From 8543da6672b0994921f014f2250e27ae81645580 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Wed, 12 Dec 2007 16:30:42 -0800 Subject: e100: free IRQ to remove warningwhenrebooting Adapted from Ian Wienand Explicitly free the IRQ before removing the device to remove a warning "Destroying IRQ without calling free_irq" Signed-off-by: Auke Kok Cc: Ian Wienand Signed-off-by: Jeff Garzik --- drivers/net/e100.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/e100.c b/drivers/net/e100.c index e1c8a0d023ea..2b06e4b4dabc 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -2737,8 +2737,9 @@ static int e100_suspend(struct pci_dev *pdev, pm_message_t state) pci_enable_wake(pdev, PCI_D3cold, 0); } - pci_disable_device(pdev); free_irq(pdev->irq, netdev); + + pci_disable_device(pdev); pci_set_power_state(pdev, PCI_D3hot); return 0; @@ -2780,6 +2781,8 @@ static void e100_shutdown(struct pci_dev *pdev) pci_enable_wake(pdev, PCI_D3cold, 0); } + free_irq(pdev->irq, netdev); + pci_disable_device(pdev); pci_set_power_state(pdev, PCI_D3hot); } -- cgit v1.2.3-59-g8ed1b From 8e9859184031ac1b0a0234b8671a90cfcd333666 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 10 Dec 2007 18:39:29 +0000 Subject: hamachi endianness fixes badly broken on big-endian * passing little-endian to pci_unmap_single() et.al. * cpu_to_le32() before passing value to writel() * worse, cpu_to_le64() and shifting/masking result before the same * hmp->tx_ring[i].status_n_length = cpu_to_le32( DescEndRing | (hmp->tx_ring[i].status_n_length & 0x0000FFFF)); is obviously bogus on big-endian. Not hard to untangle, fortunately... * poisoning addresses in rx_ring is better done after we'd done pci_unmap_single() on them, not before that. [this one affects little-endian as well, obviously, provided that pci_unmap_single() is not a no-op on target in question] Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/net/hamachi.c | 70 +++++++++++++++++++++++++++------------------------ 1 file changed, 37 insertions(+), 33 deletions(-) diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c index ed407c85708f..b53f6b6491b3 100644 --- a/drivers/net/hamachi.c +++ b/drivers/net/hamachi.c @@ -204,8 +204,10 @@ KERN_INFO " Further modifications by Keith Underwood /* Condensed bus+endian portability operations. */ #if ADDRLEN == 64 #define cpu_to_leXX(addr) cpu_to_le64(addr) +#define leXX_to_cpu(addr) le64_to_cpu(addr) #else #define cpu_to_leXX(addr) cpu_to_le32(addr) +#define leXX_to_cpu(addr) le32_to_cpu(addr) #endif @@ -465,12 +467,12 @@ enum intr_status_bits { /* The Hamachi Rx and Tx buffer descriptors. */ struct hamachi_desc { - u32 status_n_length; + __le32 status_n_length; #if ADDRLEN == 64 u32 pad; - u64 addr; + __le64 addr; #else - u32 addr; + __le32 addr; #endif }; @@ -874,13 +876,13 @@ static int hamachi_open(struct net_device *dev) #if ADDRLEN == 64 /* writellll anyone ? */ - writel(cpu_to_le64(hmp->rx_ring_dma), ioaddr + RxPtr); - writel(cpu_to_le64(hmp->rx_ring_dma) >> 32, ioaddr + RxPtr + 4); - writel(cpu_to_le64(hmp->tx_ring_dma), ioaddr + TxPtr); - writel(cpu_to_le64(hmp->tx_ring_dma) >> 32, ioaddr + TxPtr + 4); + writel(hmp->rx_ring_dma, ioaddr + RxPtr); + writel(hmp->rx_ring_dma >> 32, ioaddr + RxPtr + 4); + writel(hmp->tx_ring_dma, ioaddr + TxPtr); + writel(hmp->tx_ring_dma >> 32, ioaddr + TxPtr + 4); #else - writel(cpu_to_le32(hmp->rx_ring_dma), ioaddr + RxPtr); - writel(cpu_to_le32(hmp->tx_ring_dma), ioaddr + TxPtr); + writel(hmp->rx_ring_dma, ioaddr + RxPtr); + writel(hmp->tx_ring_dma, ioaddr + TxPtr); #endif /* TODO: It would make sense to organize this as words since the card @@ -1019,8 +1021,8 @@ static inline int hamachi_tx(struct net_device *dev) skb = hmp->tx_skbuff[entry]; if (skb) { pci_unmap_single(hmp->pci_dev, - hmp->tx_ring[entry].addr, skb->len, - PCI_DMA_TODEVICE); + leXX_to_cpu(hmp->tx_ring[entry].addr), + skb->len, PCI_DMA_TODEVICE); dev_kfree_skb(skb); hmp->tx_skbuff[entry] = NULL; } @@ -1071,10 +1073,10 @@ static void hamachi_tx_timeout(struct net_device *dev) { printk(KERN_DEBUG " Rx ring %p: ", hmp->rx_ring); for (i = 0; i < RX_RING_SIZE; i++) - printk(" %8.8x", (unsigned int)hmp->rx_ring[i].status_n_length); + printk(" %8.8x", le32_to_cpu(hmp->rx_ring[i].status_n_length)); printk("\n"KERN_DEBUG" Tx ring %p: ", hmp->tx_ring); for (i = 0; i < TX_RING_SIZE; i++) - printk(" %4.4x", hmp->tx_ring[i].status_n_length); + printk(" %4.4x", le32_to_cpu(hmp->tx_ring[i].status_n_length)); printk("\n"); } @@ -1099,14 +1101,15 @@ static void hamachi_tx_timeout(struct net_device *dev) struct sk_buff *skb; if (i >= TX_RING_SIZE - 1) - hmp->tx_ring[i].status_n_length = cpu_to_le32( - DescEndRing | - (hmp->tx_ring[i].status_n_length & 0x0000FFFF)); + hmp->tx_ring[i].status_n_length = + cpu_to_le32(DescEndRing) | + (hmp->tx_ring[i].status_n_length & + cpu_to_le32(0x0000ffff)); else - hmp->tx_ring[i].status_n_length &= 0x0000ffff; + hmp->tx_ring[i].status_n_length &= cpu_to_le32(0x0000ffff); skb = hmp->tx_skbuff[i]; if (skb){ - pci_unmap_single(hmp->pci_dev, hmp->tx_ring[i].addr, + pci_unmap_single(hmp->pci_dev, leXX_to_cpu(hmp->tx_ring[i].addr), skb->len, PCI_DMA_TODEVICE); dev_kfree_skb(skb); hmp->tx_skbuff[i] = NULL; @@ -1128,7 +1131,8 @@ static void hamachi_tx_timeout(struct net_device *dev) struct sk_buff *skb = hmp->rx_skbuff[i]; if (skb){ - pci_unmap_single(hmp->pci_dev, hmp->rx_ring[i].addr, + pci_unmap_single(hmp->pci_dev, + leXX_to_cpu(hmp->rx_ring[i].addr), hmp->rx_buf_sz, PCI_DMA_FROMDEVICE); dev_kfree_skb(skb); hmp->rx_skbuff[i] = NULL; @@ -1420,7 +1424,7 @@ static irqreturn_t hamachi_interrupt(int irq, void *dev_instance) /* Free the original skb. */ if (skb){ pci_unmap_single(hmp->pci_dev, - hmp->tx_ring[entry].addr, + leXX_to_cpu(hmp->tx_ring[entry].addr), skb->len, PCI_DMA_TODEVICE); dev_kfree_skb_irq(skb); @@ -1500,11 +1504,11 @@ static int hamachi_rx(struct net_device *dev) if (desc_status & DescOwn) break; pci_dma_sync_single_for_cpu(hmp->pci_dev, - desc->addr, + leXX_to_cpu(desc->addr), hmp->rx_buf_sz, PCI_DMA_FROMDEVICE); buf_addr = (u8 *) hmp->rx_skbuff[entry]->data; - frame_status = le32_to_cpu(get_unaligned((s32*)&(buf_addr[data_size - 12]))); + frame_status = le32_to_cpu(get_unaligned((__le32*)&(buf_addr[data_size - 12]))); if (hamachi_debug > 4) printk(KERN_DEBUG " hamachi_rx() status was %8.8x.\n", frame_status); @@ -1518,9 +1522,9 @@ static int hamachi_rx(struct net_device *dev) dev->name, desc, &hmp->rx_ring[hmp->cur_rx % RX_RING_SIZE]); printk(KERN_WARNING "%s: Oversized Ethernet frame -- next status %x/%x last status %x.\n", dev->name, - hmp->rx_ring[(hmp->cur_rx+1) % RX_RING_SIZE].status_n_length & 0xffff0000, - hmp->rx_ring[(hmp->cur_rx+1) % RX_RING_SIZE].status_n_length & 0x0000ffff, - hmp->rx_ring[(hmp->cur_rx-1) % RX_RING_SIZE].status_n_length); + le32_to_cpu(hmp->rx_ring[(hmp->cur_rx+1) % RX_RING_SIZE].status_n_length) & 0xffff0000, + le32_to_cpu(hmp->rx_ring[(hmp->cur_rx+1) % RX_RING_SIZE].status_n_length) & 0x0000ffff, + le32_to_cpu(hmp->rx_ring[(hmp->cur_rx-1) % RX_RING_SIZE].status_n_length)); hmp->stats.rx_length_errors++; } /* else Omit for prototype errata??? */ if (frame_status & 0x00380000) { @@ -1566,7 +1570,7 @@ static int hamachi_rx(struct net_device *dev) #endif skb_reserve(skb, 2); /* 16 byte align the IP header */ pci_dma_sync_single_for_cpu(hmp->pci_dev, - hmp->rx_ring[entry].addr, + leXX_to_cpu(hmp->rx_ring[entry].addr), hmp->rx_buf_sz, PCI_DMA_FROMDEVICE); /* Call copy + cksum if available. */ @@ -1579,12 +1583,12 @@ static int hamachi_rx(struct net_device *dev) + entry*sizeof(*desc), pkt_len); #endif pci_dma_sync_single_for_device(hmp->pci_dev, - hmp->rx_ring[entry].addr, + leXX_to_cpu(hmp->rx_ring[entry].addr), hmp->rx_buf_sz, PCI_DMA_FROMDEVICE); } else { pci_unmap_single(hmp->pci_dev, - hmp->rx_ring[entry].addr, + leXX_to_cpu(hmp->rx_ring[entry].addr), hmp->rx_buf_sz, PCI_DMA_FROMDEVICE); skb_put(skb = hmp->rx_skbuff[entry], pkt_len); hmp->rx_skbuff[entry] = NULL; @@ -1787,21 +1791,21 @@ static int hamachi_close(struct net_device *dev) for (i = 0; i < RX_RING_SIZE; i++) { skb = hmp->rx_skbuff[i]; hmp->rx_ring[i].status_n_length = 0; - hmp->rx_ring[i].addr = 0xBADF00D0; /* An invalid address. */ if (skb) { pci_unmap_single(hmp->pci_dev, - hmp->rx_ring[i].addr, hmp->rx_buf_sz, - PCI_DMA_FROMDEVICE); + leXX_to_cpu(hmp->rx_ring[i].addr), + hmp->rx_buf_sz, PCI_DMA_FROMDEVICE); dev_kfree_skb(skb); hmp->rx_skbuff[i] = NULL; } + hmp->rx_ring[i].addr = cpu_to_leXX(0xBADF00D0); /* An invalid address. */ } for (i = 0; i < TX_RING_SIZE; i++) { skb = hmp->tx_skbuff[i]; if (skb) { pci_unmap_single(hmp->pci_dev, - hmp->tx_ring[i].addr, skb->len, - PCI_DMA_TODEVICE); + leXX_to_cpu(hmp->tx_ring[i].addr), + skb->len, PCI_DMA_TODEVICE); dev_kfree_skb(skb); hmp->tx_skbuff[i] = NULL; } -- cgit v1.2.3-59-g8ed1b From c2b75f0cd7cb14874f179d2c09c81f77ad784df2 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 11 Dec 2007 23:23:56 +0100 Subject: drivers/net/sis190.c section fix This patch fixes the following section mismatch with CONFIG_HOTPLUG=n: <-- snip --> ... WARNING: vmlinux.o(.init.text.20+0x4cb25): Section mismatch: reference to .exit.text:sis190_mii_remove (between 'sis190_init_one' and 'read_eeprom') ... <-- snip --> Signed-off-by: Adrian Bunk Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index 720088396bb9..49f767bef6ae 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -1381,7 +1381,7 @@ out: return rc; } -static void __devexit sis190_mii_remove(struct net_device *dev) +static void sis190_mii_remove(struct net_device *dev) { struct sis190_private *tp = netdev_priv(dev); -- cgit v1.2.3-59-g8ed1b From 33390a700129aa03f3808c35de017650a688f82a Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 11 Dec 2007 23:23:06 +0100 Subject: drivers/net/s2io.c section fixes Code used by the non-__devinit s2io_open() mustn't be __devinit. This patch fixes the following section mismatch with CONFIG_HOTPLUG=n: <-- snip --> ... WARNING: vmlinux.o(.text+0x6f6e3e): Section mismatch: reference to .init.text.20:s2io_test_intr (between 's2io_open' and 's2io_ethtool_sset') ... <-- snip --> Signed-off-by: Adrian Bunk Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 121cb100f93a..9d80f1cf73ac 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -3737,7 +3737,7 @@ static int s2io_enable_msi_x(struct s2io_nic *nic) } /* Handle software interrupt used during MSI(X) test */ -static irqreturn_t __devinit s2io_test_intr(int irq, void *dev_id) +static irqreturn_t s2io_test_intr(int irq, void *dev_id) { struct s2io_nic *sp = dev_id; @@ -3748,7 +3748,7 @@ static irqreturn_t __devinit s2io_test_intr(int irq, void *dev_id) } /* Test interrupt path by forcing a a software IRQ */ -static int __devinit s2io_test_msi(struct s2io_nic *sp) +static int s2io_test_msi(struct s2io_nic *sp) { struct pci_dev *pdev = sp->pdev; struct XENA_dev_config __iomem *bar0 = sp->bar0; -- cgit v1.2.3-59-g8ed1b From 4b8fdefa090c8b9582f58a93f73938f9b86c264a Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 13 Dec 2007 16:02:55 -0800 Subject: ucc_geth: minor whitespace fix The zombie whitespace from outer space that will not die! Cc: "David S. Miller" Cc: Emil Medve Cc: Jeff Garzik Cc: Kumar Gala Cc: Li Yang Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/ucc_geth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index 7f689907ac28..abac7db3819e 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -3447,7 +3447,7 @@ static int ucc_geth_rx(struct ucc_geth_private *ugeth, u8 rxQ, int rx_work_limit u16 length, howmany = 0; u32 bd_status; u8 *bdBuffer; - struct net_device * dev; + struct net_device *dev; ugeth_vdbg("%s: IN", __FUNCTION__); -- cgit v1.2.3-59-g8ed1b From b173079feaed7664a3407eb17e102010d687a051 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 13 Dec 2007 16:02:59 -0800 Subject: net: smc911x: shut up compiler warnings Trivial fix to shut up gcc. Signed-off-by: Paul Mundt Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/smc911x.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h index d04e4fa35206..7defa63b9c74 100644 --- a/drivers/net/smc911x.h +++ b/drivers/net/smc911x.h @@ -76,7 +76,7 @@ -#if SMC_USE_PXA_DMA +#ifdef SMC_USE_PXA_DMA #define SMC_USE_DMA /* -- cgit v1.2.3-59-g8ed1b From 470738758db2c209481fdf92ca09f60e690a62d3 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 13 Dec 2007 16:02:57 -0800 Subject: Net: ibm_newemac, remove SPIN_LOCK_UNLOCKED SPIN_LOCK_UNLOCKED is deprecated, use DEFINE_SPINLOCK instead Signed-off-by: Jiri Slaby Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/ibm_newemac/debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ibm_newemac/debug.c b/drivers/net/ibm_newemac/debug.c index a2fc660ca5d4..86b756a30784 100644 --- a/drivers/net/ibm_newemac/debug.c +++ b/drivers/net/ibm_newemac/debug.c @@ -26,7 +26,7 @@ #include "core.h" -static spinlock_t emac_dbg_lock = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(emac_dbg_lock); static void emac_desc_dump(struct emac_instance *p) { -- cgit v1.2.3-59-g8ed1b From 3fd7131feacc01c1e23e46c416228f36ebdcc0d4 Mon Sep 17 00:00:00 2001 From: Matheos Worku Date: Fri, 14 Dec 2007 11:48:29 -0800 Subject: ixgb: make sure jumbos stay enabled after reset Currently a device reset (ethtool -r ethX) would cause the adapter to fall back to regular MTU sizes. Signed-off-by: Matheos Worku Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/ixgb/ixgb_main.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index 3021234b1e17..bf9085fe035a 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -320,10 +320,22 @@ ixgb_down(struct ixgb_adapter *adapter, boolean_t kill_watchdog) void ixgb_reset(struct ixgb_adapter *adapter) { + struct ixgb_hw *hw = &adapter->hw; - ixgb_adapter_stop(&adapter->hw); - if(!ixgb_init_hw(&adapter->hw)) + ixgb_adapter_stop(hw); + if (!ixgb_init_hw(hw)) DPRINTK(PROBE, ERR, "ixgb_init_hw failed.\n"); + + /* restore frame size information */ + IXGB_WRITE_REG(hw, MFS, hw->max_frame_size << IXGB_MFS_SHIFT); + if (hw->max_frame_size > + IXGB_MAX_ENET_FRAME_SIZE_WITHOUT_FCS + ENET_FCS_LENGTH) { + u32 ctrl0 = IXGB_READ_REG(hw, CTRL0); + if (!(ctrl0 & IXGB_CTRL0_JFE)) { + ctrl0 |= IXGB_CTRL0_JFE; + IXGB_WRITE_REG(hw, CTRL0, ctrl0); + } + } } /** -- cgit v1.2.3-59-g8ed1b From f2a89004da23a5ed2d78ac5550ccda5b714fe7d0 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Wed, 12 Dec 2007 10:34:29 -0800 Subject: [NETFILTER]: ctnetlink: set expected bit for related conntracks This patch is a fix. It sets IPS_EXPECTED for related conntracks. Signed-off-by: Pablo Neira Ayuso Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/nf_conntrack_netlink.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index 9be1826e6cdd..7d231243754a 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -1024,8 +1024,10 @@ ctnetlink_create_conntrack(struct nlattr *cda[], } /* setup master conntrack: this is a confirmed expectation */ - if (master_ct) + if (master_ct) { + __set_bit(IPS_EXPECTED_BIT, &ct->status); ct->master = master_ct; + } add_timer(&ct->timeout); nf_conntrack_hash_insert(ct); -- cgit v1.2.3-59-g8ed1b From a18aa31b7774d8b36048e256a02d9d689533fc96 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Wed, 12 Dec 2007 10:35:16 -0800 Subject: [NETFILTER]: ip_tables: fix compat copy race When copying entries to user, the kernel makes two passes through the data, first copying all the entries, then fixing up names and counters. On the second pass it copies the kernel and match data from userspace to the kernel again to find the corresponding structures, expecting that kernel pointers contained in the data are still valid. This is obviously broken, fix by avoiding the second pass completely and fixing names and counters while dumping the ruleset, using the kernel-internal data structures. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/ipv4/netfilter/ip_tables.c | 57 +++++++++--------------------------------- net/netfilter/x_tables.c | 8 ++++-- 2 files changed, 18 insertions(+), 47 deletions(-) diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c index 4b10b98640ac..b9b189c26208 100644 --- a/net/ipv4/netfilter/ip_tables.c +++ b/net/ipv4/netfilter/ip_tables.c @@ -1492,8 +1492,10 @@ static inline int compat_copy_match_to_user(struct ipt_entry_match *m, return xt_compat_match_to_user(m, dstptr, size); } -static int compat_copy_entry_to_user(struct ipt_entry *e, - void __user **dstptr, compat_uint_t *size) +static int +compat_copy_entry_to_user(struct ipt_entry *e, void __user **dstptr, + compat_uint_t *size, struct xt_counters *counters, + unsigned int *i) { struct ipt_entry_target *t; struct compat_ipt_entry __user *ce; @@ -1507,6 +1509,9 @@ static int compat_copy_entry_to_user(struct ipt_entry *e, if (copy_to_user(ce, e, sizeof(struct ipt_entry))) goto out; + if (copy_to_user(&ce->counters, &counters[*i], sizeof(counters[*i]))) + goto out; + *dstptr += sizeof(struct compat_ipt_entry); ret = IPT_MATCH_ITERATE(e, compat_copy_match_to_user, dstptr, size); target_offset = e->target_offset - (origsize - *size); @@ -1522,6 +1527,8 @@ static int compat_copy_entry_to_user(struct ipt_entry *e, goto out; if (put_user(next_offset, &ce->next_offset)) goto out; + + (*i)++; return 0; out: return ret; @@ -1937,14 +1944,13 @@ struct compat_ipt_get_entries static int compat_copy_entries_to_user(unsigned int total_size, struct xt_table *table, void __user *userptr) { - unsigned int off, num; - struct compat_ipt_entry e; struct xt_counters *counters; struct xt_table_info *private = table->private; void __user *pos; unsigned int size; int ret = 0; void *loc_cpu_entry; + unsigned int i = 0; counters = alloc_counters(table); if (IS_ERR(counters)) @@ -1958,48 +1964,9 @@ static int compat_copy_entries_to_user(unsigned int total_size, pos = userptr; size = total_size; ret = IPT_ENTRY_ITERATE(loc_cpu_entry, total_size, - compat_copy_entry_to_user, &pos, &size); - if (ret) - goto free_counters; - - /* ... then go back and fix counters and names */ - for (off = 0, num = 0; off < size; off += e.next_offset, num++) { - unsigned int i; - struct ipt_entry_match m; - struct ipt_entry_target t; + compat_copy_entry_to_user, + &pos, &size, counters, &i); - ret = -EFAULT; - if (copy_from_user(&e, userptr + off, - sizeof(struct compat_ipt_entry))) - goto free_counters; - if (copy_to_user(userptr + off + - offsetof(struct compat_ipt_entry, counters), - &counters[num], sizeof(counters[num]))) - goto free_counters; - - for (i = sizeof(struct compat_ipt_entry); - i < e.target_offset; i += m.u.match_size) { - if (copy_from_user(&m, userptr + off + i, - sizeof(struct ipt_entry_match))) - goto free_counters; - if (copy_to_user(userptr + off + i + - offsetof(struct ipt_entry_match, u.user.name), - m.u.kernel.match->name, - strlen(m.u.kernel.match->name) + 1)) - goto free_counters; - } - - if (copy_from_user(&t, userptr + off + e.target_offset, - sizeof(struct ipt_entry_target))) - goto free_counters; - if (copy_to_user(userptr + off + e.target_offset + - offsetof(struct ipt_entry_target, u.user.name), - t.u.kernel.target->name, - strlen(t.u.kernel.target->name) + 1)) - goto free_counters; - } - ret = 0; -free_counters: vfree(counters); return ret; } diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c index d9a3bded0d00..b6160e41eb1c 100644 --- a/net/netfilter/x_tables.c +++ b/net/netfilter/x_tables.c @@ -377,7 +377,9 @@ int xt_compat_match_to_user(struct xt_entry_match *m, void __user **dstptr, u_int16_t msize = m->u.user.match_size - off; if (copy_to_user(cm, m, sizeof(*cm)) || - put_user(msize, &cm->u.user.match_size)) + put_user(msize, &cm->u.user.match_size) || + copy_to_user(cm->u.user.name, m->u.kernel.match->name, + strlen(m->u.kernel.match->name) + 1)) return -EFAULT; if (match->compat_to_user) { @@ -468,7 +470,9 @@ int xt_compat_target_to_user(struct xt_entry_target *t, void __user **dstptr, u_int16_t tsize = t->u.user.target_size - off; if (copy_to_user(ct, t, sizeof(*ct)) || - put_user(tsize, &ct->u.user.target_size)) + put_user(tsize, &ct->u.user.target_size) || + copy_to_user(ct->u.user.name, t->u.kernel.target->name, + strlen(t->u.kernel.target->name) + 1)) return -EFAULT; if (target->compat_to_user) { -- cgit v1.2.3-59-g8ed1b From 9ab4c954ce2b2b3c485bee7e425fda05946893be Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Wed, 12 Dec 2007 11:10:16 -0800 Subject: [XFRM]: Display the audited SPI value in host byte order. Currently the IPsec protocol SPI values are written to the audit log in network byte order which is different from almost all other values which are recorded in host byte order. This patch corrects this inconsistency by writing the SPI values to the audit record in host byte order. Signed-off-by: Paul Moore Signed-off-by: David S. Miller --- net/xfrm/xfrm_state.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c index cf43c49eab37..1af522bf12ca 100644 --- a/net/xfrm/xfrm_state.c +++ b/net/xfrm/xfrm_state.c @@ -2028,6 +2028,7 @@ void xfrm_audit_state_add(struct xfrm_state *x, int result, u32 auid, u32 sid) { struct audit_buffer *audit_buf; + u32 spi; extern int audit_enabled; if (audit_enabled == 0) @@ -2037,8 +2038,8 @@ xfrm_audit_state_add(struct xfrm_state *x, int result, u32 auid, u32 sid) return; audit_log_format(audit_buf, " op=SAD-add res=%u",result); xfrm_audit_common_stateinfo(x, audit_buf); - audit_log_format(audit_buf, " spi=%lu(0x%lx)", - (unsigned long)x->id.spi, (unsigned long)x->id.spi); + spi = ntohl(x->id.spi); + audit_log_format(audit_buf, " spi=%u(0x%x)", spi, spi); audit_log_end(audit_buf); } EXPORT_SYMBOL_GPL(xfrm_audit_state_add); @@ -2047,6 +2048,7 @@ void xfrm_audit_state_delete(struct xfrm_state *x, int result, u32 auid, u32 sid) { struct audit_buffer *audit_buf; + u32 spi; extern int audit_enabled; if (audit_enabled == 0) @@ -2056,8 +2058,8 @@ xfrm_audit_state_delete(struct xfrm_state *x, int result, u32 auid, u32 sid) return; audit_log_format(audit_buf, " op=SAD-delete res=%u",result); xfrm_audit_common_stateinfo(x, audit_buf); - audit_log_format(audit_buf, " spi=%lu(0x%lx)", - (unsigned long)x->id.spi, (unsigned long)x->id.spi); + spi = ntohl(x->id.spi); + audit_log_format(audit_buf, " spi=%u(0x%x)", spi, spi); audit_log_end(audit_buf); } EXPORT_SYMBOL_GPL(xfrm_audit_state_delete); -- cgit v1.2.3-59-g8ed1b From cbebc51f7b77d26ec23145d6ef22ac2b209f7955 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 12 Dec 2007 11:11:28 -0800 Subject: [NETFILTER]: xt_hashlimit should use time_after_eq() In order to avoid jiffies wraparound and its effect, special care must be taken when doing comparisons ... Signed-off-by: Eric Dumazet Acked-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/xt_hashlimit.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/xt_hashlimit.c b/net/netfilter/xt_hashlimit.c index 19103678bf20..2ef44d8560c1 100644 --- a/net/netfilter/xt_hashlimit.c +++ b/net/netfilter/xt_hashlimit.c @@ -240,7 +240,7 @@ static bool select_all(const struct xt_hashlimit_htable *ht, static bool select_gc(const struct xt_hashlimit_htable *ht, const struct dsthash_ent *he) { - return jiffies >= he->expires; + return time_after_eq(jiffies, he->expires); } static void htable_selective_cleanup(struct xt_hashlimit_htable *ht, -- cgit v1.2.3-59-g8ed1b From 98eb5683fb94c458b3c8d121797bc9aa1baf4e7e Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 12 Dec 2007 11:24:19 -0800 Subject: [TIPC]: Fix semaphore handling. As noted by Kevin, tipc's release() does down_interruptible() and ignores the return value. So if signal_pending() we'll end up doing up() on a non-downed semaphore. Fix. Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- net/tipc/socket.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/tipc/socket.c b/net/tipc/socket.c index 6b792265dc06..24ddfd2ca38b 100644 --- a/net/tipc/socket.c +++ b/net/tipc/socket.c @@ -253,7 +253,7 @@ static int release(struct socket *sock) dbg("sock_delete: %x\n",tsock); if (!tsock) return 0; - down_interruptible(&tsock->sem); + down(&tsock->sem); if (!sock->sk) { up(&tsock->sem); return 0; -- cgit v1.2.3-59-g8ed1b From 6f229d76b4c4a7fae601ea9398b23c2b426ab3b9 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 12 Dec 2007 18:50:18 -0800 Subject: [SYNCPPP]: Endianness and 64bit fixes. * trivial annotations * long != 32bit, use __be32 * wrong endianness in sending CISCO_ADDR_REPLY Signed-off-by: Al Viro Signed-off-by: David S. Miller --- drivers/net/wan/syncppp.c | 35 +++++++++++++++++------------------ 1 file changed, 17 insertions(+), 18 deletions(-) diff --git a/drivers/net/wan/syncppp.c b/drivers/net/wan/syncppp.c index 232ecba5340f..61e24b7a45a3 100644 --- a/drivers/net/wan/syncppp.c +++ b/drivers/net/wan/syncppp.c @@ -107,24 +107,24 @@ struct ppp_header { u8 address; u8 control; - u16 protocol; + __be16 protocol; }; #define PPP_HEADER_LEN sizeof (struct ppp_header) struct lcp_header { u8 type; u8 ident; - u16 len; + __be16 len; }; #define LCP_HEADER_LEN sizeof (struct lcp_header) struct cisco_packet { - u32 type; - u32 par1; - u32 par2; - u16 rel; - u16 time0; - u16 time1; + __be32 type; + __be32 par1; + __be32 par2; + __be16 rel; + __be16 time0; + __be16 time1; }; #define CISCO_PACKET_LEN 18 #define CISCO_BIG_PACKET_LEN 20 @@ -139,7 +139,7 @@ static struct sk_buff_head tx_queue; static void sppp_keepalive (unsigned long dummy); static void sppp_cp_send (struct sppp *sp, u16 proto, u8 type, u8 ident, u16 len, void *data); -static void sppp_cisco_send (struct sppp *sp, int type, long par1, long par2); +static void sppp_cisco_send (struct sppp *sp, int type, u32 par1, u32 par2); static void sppp_lcp_input (struct sppp *sp, struct sk_buff *m); static void sppp_cisco_input (struct sppp *sp, struct sk_buff *m); static void sppp_ipcp_input (struct sppp *sp, struct sk_buff *m); @@ -447,7 +447,7 @@ static void sppp_keepalive (unsigned long dummy) sppp_cisco_send (sp, CISCO_KEEPALIVE_REQ, ++sp->pp_seq, sp->pp_rseq); else if (sp->lcp.state == LCP_STATE_OPENED) { - long nmagic = htonl (sp->lcp.magic); + __be32 nmagic = htonl (sp->lcp.magic); sp->lcp.echoid = ++sp->pp_seq; sppp_cp_send (sp, PPP_LCP, LCP_ECHO_REQ, sp->lcp.echoid, 4, &nmagic); @@ -667,7 +667,7 @@ badreq: dev->name, len); break; } - if (ntohl (*(long*)(h+1)) == sp->lcp.magic) { + if (ntohl (*(__be32*)(h+1)) == sp->lcp.magic) { /* Line loopback mode detected. */ printk (KERN_WARNING "%s: loopback\n", dev->name); if_down (dev); @@ -680,7 +680,7 @@ badreq: sppp_lcp_open (sp); break; } - *(long*)(h+1) = htonl (sp->lcp.magic); + *(__be32 *)(h+1) = htonl (sp->lcp.magic); sppp_cp_send (sp, PPP_LCP, LCP_ECHO_REPLY, h->ident, len-4, h+1); break; case LCP_ECHO_REPLY: @@ -692,7 +692,7 @@ badreq: dev->name, len); break; } - if (ntohl (*(long*)(h+1)) != sp->lcp.magic) + if (ntohl(*(__be32 *)(h+1)) != sp->lcp.magic) sp->pp_alivecnt = 0; break; } @@ -765,7 +765,7 @@ static void sppp_cisco_input (struct sppp *sp, struct sk_buff *skb) { struct in_device *in_dev; struct in_ifaddr *ifa; - __be32 addr = 0, mask = ~0; /* FIXME: is the mask correct? */ + __be32 addr = 0, mask = htonl(~0U); /* FIXME: is the mask correct? */ #ifdef CONFIG_INET rcu_read_lock(); if ((in_dev = __in_dev_get_rcu(dev)) != NULL) @@ -782,8 +782,7 @@ static void sppp_cisco_input (struct sppp *sp, struct sk_buff *skb) } rcu_read_unlock(); #endif - /* I hope both addr and mask are in the net order */ - sppp_cisco_send (sp, CISCO_ADDR_REPLY, addr, mask); + sppp_cisco_send (sp, CISCO_ADDR_REPLY, ntohl(addr), ntohl(mask)); break; } } @@ -844,7 +843,7 @@ static void sppp_cp_send (struct sppp *sp, u16 proto, u8 type, * Send Cisco keepalive packet. */ -static void sppp_cisco_send (struct sppp *sp, int type, long par1, long par2) +static void sppp_cisco_send (struct sppp *sp, int type, u32 par1, u32 par2) { struct ppp_header *h; struct cisco_packet *ch; @@ -868,7 +867,7 @@ static void sppp_cisco_send (struct sppp *sp, int type, long par1, long par2) ch->type = htonl (type); ch->par1 = htonl (par1); ch->par2 = htonl (par2); - ch->rel = -1; + ch->rel = htons(0xffff); ch->time0 = htons ((u16) (t >> 16)); ch->time1 = htons ((u16) t); -- cgit v1.2.3-59-g8ed1b From 4a9ecd5960e6a7814f6e3405807d49010ffe3a88 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Thu, 13 Dec 2007 09:32:04 -0800 Subject: [NETFILTER]: bridge: fix missing link layer headers on outgoing routed packets As reported by Damien Thebault, the double POSTROUTING hook invocation fix caused outgoing packets routed between two bridges to appear without a link-layer header. The reason for this is that we're skipping the br_nf_post_routing hook for routed packets now and don't save the original link layer header, but nevertheless tries to restore it on output, causing corruption. The root cause for this is that skb->nf_bridge has no clearly defined lifetime and is used to indicate all kind of things, but that is quite complicated to fix. For now simply don't touch these packets and handle them like packets from any other device. Tested-by: Damien Thebault Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netfilter_bridge.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/linux/netfilter_bridge.h b/include/linux/netfilter_bridge.h index 533ee351a273..499aa9375901 100644 --- a/include/linux/netfilter_bridge.h +++ b/include/linux/netfilter_bridge.h @@ -50,7 +50,8 @@ enum nf_br_hook_priorities { extern int nf_bridge_copy_header(struct sk_buff *skb); static inline int nf_bridge_maybe_copy_header(struct sk_buff *skb) { - if (skb->nf_bridge) + if (skb->nf_bridge && + skb->nf_bridge->mask & (BRNF_BRIDGED | BRNF_BRIDGED_DNAT)) return nf_bridge_copy_header(skb); return 0; } -- cgit v1.2.3-59-g8ed1b From f58adb757be48068e2bded3dd77ba072c22a10ff Mon Sep 17 00:00:00 2001 From: "Tom \"spot\" Callaway" Date: Thu, 13 Dec 2007 09:33:50 -0800 Subject: [ATM]: Fix compiler warning noise with FORE200E driver gcc throws these warnings with: CONFIG_ATM_FORE200E=m # CONFIG_ATM_FORE200E_PCA is not set drivers/atm/fore200e.c:2695: warning: 'fore200e_pca_detect' defined but not used drivers/atm/fore200e.c:2748: warning: 'fore200e_pca_remove_one' defined but not used By moving the #ifdef CONFIG_ATM_FORE200E_PCA around those two functions, the compiler warnings are silenced. Signed-off-by: Tom "spot" Callaway Signed-off-by: David S. Miller --- drivers/atm/fore200e.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c index 8b12925fe7a4..f97e050338f0 100644 --- a/drivers/atm/fore200e.c +++ b/drivers/atm/fore200e.c @@ -2689,7 +2689,7 @@ fore200e_init(struct fore200e* fore200e) return 0; } - +#ifdef CONFIG_ATM_FORE200E_PCA static int __devinit fore200e_pca_detect(struct pci_dev *pci_dev, const struct pci_device_id *pci_ent) { @@ -2756,7 +2756,6 @@ static void __devexit fore200e_pca_remove_one(struct pci_dev *pci_dev) } -#ifdef CONFIG_ATM_FORE200E_PCA static struct pci_device_id fore200e_pca_tbl[] = { { PCI_VENDOR_ID_FORE, PCI_DEVICE_ID_FORE_PCA200E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) &fore200e_bus[0] }, -- cgit v1.2.3-59-g8ed1b From f33e1d9fa20381afa3be7e7f560c59845bfa5cec Mon Sep 17 00:00:00 2001 From: Amos Waterland Date: Fri, 14 Dec 2007 11:30:22 -0800 Subject: [IPV4]: Updates to nfsroot documentation The difference between ip=off and ip=::::::off has been a cause of much confusion. Document how each behaves, and do not contradict ourselves by saying that "off" is the default when in fact "any" is the default and is descibed as being so lower in the file. Signed-off-by: Amos Waterland Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- Documentation/nfsroot.txt | 12 +++++++++--- net/ipv4/ipconfig.c | 20 +------------------- 2 files changed, 10 insertions(+), 22 deletions(-) diff --git a/Documentation/nfsroot.txt b/Documentation/nfsroot.txt index 16a7cae2721d..9b956a969362 100644 --- a/Documentation/nfsroot.txt +++ b/Documentation/nfsroot.txt @@ -92,8 +92,14 @@ ip=:::::: autoconfiguration. The parameter can appear alone as the value to the `ip' - parameter (without all the ':' characters before) in which case auto- - configuration is used. + parameter (without all the ':' characters before). If the value is + "ip=off" or "ip=none", no autoconfiguration will take place, otherwise + autoconfiguration will take place. The most common way to use this + is "ip=dhcp". + + Note that "ip=off" is not the same thing as "ip=::::::off", because in + the latter autoconfiguration will take place if any of DHCP, BOOTP or RARP + are compiled in the kernel. IP address of the client. @@ -142,7 +148,7 @@ ip=:::::: into the kernel will be used, regardless of the value of this option. - off or none: don't use autoconfiguration (default) + off or none: don't use autoconfiguration on or any: use any protocol available in the kernel dhcp: use DHCP bootp: use BOOTP diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c index c5c107a01823..96400b0bd08a 100644 --- a/net/ipv4/ipconfig.c +++ b/net/ipv4/ipconfig.c @@ -1396,25 +1396,7 @@ late_initcall(ip_auto_config); /* * Decode any IP configuration options in the "ip=" or "nfsaddrs=" kernel - * command line parameter. It consists of option fields separated by colons in - * the following order: - * - * :::::: - * - * Any of the fields can be empty which means to use a default value: - * - address given by BOOTP or RARP - * - address of host returning BOOTP or RARP packet - * - none, or the address returned by BOOTP - * - automatically determined from , or the - * one returned by BOOTP - * - in ASCII notation, or the name returned - * by BOOTP - * - use all available devices - * : - * off|none - don't do autoconfig at all (DEFAULT) - * on|any - use any configured protocol - * dhcp|bootp|rarp - use only the specified protocol - * both - use both BOOTP and RARP (not DHCP) + * command line parameter. See Documentation/nfsroot.txt. */ static int __init ic_proto_name(char *name) { -- cgit v1.2.3-59-g8ed1b From 3ae412544cde6d987e0e48778bd87bc96a5749df Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Sun, 16 Dec 2007 13:35:51 -0800 Subject: [BRIDGE]: Assign random address. Assigning a valid random address to bridge device solves problems when bridge device is brought up before adding real device to bridge. When the first real device is added to the bridge, it's address will overide the bridges random address. Note: any device added to a bridge must already have a valid ethernet address. br_add_if -> br_fdb_insert -> fdb_insert -> is_valid_ether_addr Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/bridge/br_device.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c index c07bac5e3e10..bf7787395fe0 100644 --- a/net/bridge/br_device.c +++ b/net/bridge/br_device.c @@ -157,8 +157,7 @@ static struct ethtool_ops br_ethtool_ops = { void br_dev_setup(struct net_device *dev) { - memset(dev->dev_addr, 0, ETH_ALEN); - + random_ether_addr(dev->dev_addr); ether_setup(dev); dev->do_ioctl = br_dev_ioctl; -- cgit v1.2.3-59-g8ed1b From cf6fc4a92400decda932e5ab97b46916919142b1 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 16 Dec 2007 13:39:57 -0800 Subject: [IPV6]: Fix the return value of ipv6_getsockopt If CONFIG_NETFILTER if not selected when compile the kernel source code, ipv6_getsockopt will returen an EINVAL error if optname is not supported by the kernel. But if CONFIG_NETFILTER is selected, ENOPROTOOPT error will be return. This patch fix to always return ENOPROTOOPT error if optname argument of ipv6_getsockopt is not supported by the kernel. Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- net/ipv6/ipv6_sockglue.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index 1334fc174bcf..8c5f80fd03ad 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -1046,7 +1046,7 @@ static int do_ipv6_getsockopt(struct sock *sk, int level, int optname, break; default: - return -EINVAL; + return -ENOPROTOOPT; } len = min_t(unsigned int, sizeof(int), len); if(put_user(len, optlen)) @@ -1069,9 +1069,8 @@ int ipv6_getsockopt(struct sock *sk, int level, int optname, err = do_ipv6_getsockopt(sk, level, optname, optval, optlen); #ifdef CONFIG_NETFILTER - /* we need to exclude all possible EINVALs except default case */ - if (err == -EINVAL && optname != IPV6_ADDRFORM && - optname != MCAST_MSFILTER) { + /* we need to exclude all possible ENOPROTOOPTs except default case */ + if (err == -ENOPROTOOPT && optname != IPV6_2292PKTOPTIONS) { int len; if (get_user(len, optlen)) @@ -1108,9 +1107,8 @@ int compat_ipv6_getsockopt(struct sock *sk, int level, int optname, err = do_ipv6_getsockopt(sk, level, optname, optval, optlen); #ifdef CONFIG_NETFILTER - /* we need to exclude all possible EINVALs except default case */ - if (err == -EINVAL && optname != IPV6_ADDRFORM && - optname != MCAST_MSFILTER) { + /* we need to exclude all possible ENOPROTOOPTs except default case */ + if (err == -ENOPROTOOPT && optname != IPV6_2292PKTOPTIONS) { int len; if (get_user(len, optlen)) -- cgit v1.2.3-59-g8ed1b From 488faa2ae32c2f8b1ffda5c7fae5eb7c979acc15 Mon Sep 17 00:00:00 2001 From: Satoru SATOH Date: Sun, 16 Dec 2007 14:00:19 -0800 Subject: [IPV4]: Make tcp_input_metrics() get minimum RTO via tcp_rto_min() tcp_input_metrics() refers to the built-time constant TCP_RTO_MIN regardless of configured minimum RTO with iproute2. Signed-off-by: Satoru SATOH Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index b9e429d2d1de..889c89362bfc 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -923,7 +923,7 @@ static void tcp_init_metrics(struct sock *sk) } if (dst_metric(dst, RTAX_RTTVAR) > tp->mdev) { tp->mdev = dst_metric(dst, RTAX_RTTVAR); - tp->mdev_max = tp->rttvar = max(tp->mdev, TCP_RTO_MIN); + tp->mdev_max = tp->rttvar = max(tp->mdev, tcp_rto_min(sk)); } tcp_set_rto(sk); tcp_bound_rto(sk); -- cgit v1.2.3-59-g8ed1b From 215f7b08f2a142ec19f4bd3d6de263e68b877955 Mon Sep 17 00:00:00 2001 From: Jarek Poplawski Date: Sun, 16 Dec 2007 14:02:07 -0800 Subject: [AX25]: Locking dependencies fix in ax25_disconnect(). Bernard Pidoux reported these lockdep warnings: [ INFO: possible irq lock inversion dependency detected ] 2.6.23.1 #1 --------------------------------------------------------- fpac/4933 just changed the state of lock: (slock-AF_AX25){--..}, at: [] ax25_disconnect+0x46/0xaf [ax25] but this lock was taken by another, soft-irq-safe lock in the past: (ax25_list_lock){-+..} and interrupts could create inverse lock ordering between them. [...] [ INFO: inconsistent lock state ] 2.6.23.1 #1 --------------------------------- inconsistent {in-softirq-W} -> {softirq-on-W} usage. ax25_call/4005 [HC0[0]:SC0[0]:HE1:SE1] takes: (slock-AF_AX25){-+..}, at: [] ax25_disconnect+0x46/0xaf [ax25] [...] This means slock-AF_AX25 could be taken both from softirq and process context with softirqs enabled, so it's endangered itself, but also makes ax25_list_lock vulnerable. It was not 100% verified if the real lockup can happen, but this fix isn't very costly and looks safe anyway. (It was tested by Bernard with 2.6.23.9 and 2.6.24-rc5 kernels.) Reported_by: Bernard Pidoux Tested_by: Bernard Pidoux Signed-off-by: Jarek Poplawski Signed-off-by: David S. Miller --- net/ax25/ax25_subr.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ax25/ax25_subr.c b/net/ax25/ax25_subr.c index 5fe9b2a6697d..d8f215733175 100644 --- a/net/ax25/ax25_subr.c +++ b/net/ax25/ax25_subr.c @@ -279,6 +279,7 @@ void ax25_disconnect(ax25_cb *ax25, int reason) ax25_link_failed(ax25, reason); if (ax25->sk != NULL) { + local_bh_disable(); bh_lock_sock(ax25->sk); ax25->sk->sk_state = TCP_CLOSE; ax25->sk->sk_err = reason; @@ -288,5 +289,6 @@ void ax25_disconnect(ax25_cb *ax25, int reason) sock_set_flag(ax25->sk, SOCK_DEAD); } bh_unlock_sock(ax25->sk); + local_bh_enable(); } } -- cgit v1.2.3-59-g8ed1b From ef5d4cf2f9aae4e09883d2d664e367a16b47d857 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Sun, 16 Dec 2007 14:05:45 -0800 Subject: [SCTP]: Flush fragment queue when exiting partial delivery. At the end of partial delivery, we may have complete messages sitting on the fragment queue. These messages are stuck there until a new fragment arrives. This can comletely stall a given association. When clearing partial delivery state, flush any complete messages from the fragment queue and send them on their way up. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/sctp/ulpqueue.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/net/sctp/ulpqueue.c b/net/sctp/ulpqueue.c index 4908041ffb31..1733fa29a501 100644 --- a/net/sctp/ulpqueue.c +++ b/net/sctp/ulpqueue.c @@ -53,6 +53,7 @@ static struct sctp_ulpevent * sctp_ulpq_reasm(struct sctp_ulpq *ulpq, struct sctp_ulpevent *); static struct sctp_ulpevent * sctp_ulpq_order(struct sctp_ulpq *, struct sctp_ulpevent *); +static void sctp_ulpq_reasm_drain(struct sctp_ulpq *ulpq); /* 1st Level Abstractions */ @@ -190,6 +191,7 @@ static void sctp_ulpq_set_pd(struct sctp_ulpq *ulpq) static int sctp_ulpq_clear_pd(struct sctp_ulpq *ulpq) { ulpq->pd_mode = 0; + sctp_ulpq_reasm_drain(ulpq); return sctp_clear_pd(ulpq->asoc->base.sk, ulpq->asoc); } @@ -699,6 +701,37 @@ void sctp_ulpq_reasm_flushtsn(struct sctp_ulpq *ulpq, __u32 fwd_tsn) } } +/* + * Drain the reassembly queue. If we just cleared parted delivery, it + * is possible that the reassembly queue will contain already reassembled + * messages. Retrieve any such messages and give them to the user. + */ +static void sctp_ulpq_reasm_drain(struct sctp_ulpq *ulpq) +{ + struct sctp_ulpevent *event = NULL; + struct sk_buff_head temp; + + if (skb_queue_empty(&ulpq->reasm)) + return; + + while ((event = sctp_ulpq_retrieve_reassembled(ulpq)) != NULL) { + /* Do ordering if needed. */ + if ((event) && (event->msg_flags & MSG_EOR)){ + skb_queue_head_init(&temp); + __skb_queue_tail(&temp, sctp_event2skb(event)); + + event = sctp_ulpq_order(ulpq, event); + } + + /* Send event to the ULP. 'event' is the + * sctp_ulpevent for very first SKB on the temp' list. + */ + if (event) + sctp_ulpq_tail_event(ulpq, event); + } +} + + /* Helper function to gather skbs that have possibly become * ordered by an an incoming chunk. */ -- cgit v1.2.3-59-g8ed1b From 497ba7f4c8113ed699a4fd793d1437f0c8f2da5e Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Sun, 16 Dec 2007 14:07:36 -0800 Subject: [IRDA]: Race between open and disconnect in irda-usb. It seems to me that irda_usb_net_open() must set self->netopen under spinlock or disconnect() may fail to kill all URBs, if it is called while an interface is opened. Signed-off-by: Oliver Neukum Signed-off-by: Samuel Ortiz Signed-off-by: David S. Miller --- drivers/net/irda/irda-usb.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c index c6355c00fd7a..9081234ab458 100644 --- a/drivers/net/irda/irda-usb.c +++ b/drivers/net/irda/irda-usb.c @@ -1168,6 +1168,7 @@ static int stir421x_patch_device(struct irda_usb_cb *self) static int irda_usb_net_open(struct net_device *netdev) { struct irda_usb_cb *self; + unsigned long flags; char hwname[16]; int i; @@ -1177,13 +1178,16 @@ static int irda_usb_net_open(struct net_device *netdev) self = (struct irda_usb_cb *) netdev->priv; IRDA_ASSERT(self != NULL, return -1;); + spin_lock_irqsave(&self->lock, flags); /* Can only open the device if it's there */ if(!self->present) { + spin_unlock_irqrestore(&self->lock, flags); IRDA_WARNING("%s(), device not present!\n", __FUNCTION__); return -1; } if(self->needspatch) { + spin_unlock_irqrestore(&self->lock, flags); IRDA_WARNING("%s(), device needs patch\n", __FUNCTION__) ; return -EIO ; } @@ -1198,6 +1202,7 @@ static int irda_usb_net_open(struct net_device *netdev) /* To do *before* submitting Rx urbs and starting net Tx queue * Jean II */ self->netopen = 1; + spin_unlock_irqrestore(&self->lock, flags); /* * Now that everything should be initialized properly, -- cgit v1.2.3-59-g8ed1b From 0ff804348d66550e7dd1d6781c65403b312e2da2 Mon Sep 17 00:00:00 2001 From: Hinko Kocevar Date: Sun, 16 Dec 2007 14:08:22 -0800 Subject: [IRDA]: mcs7780 needs to free allocated rx buffer. While testing the mcs7780 based IrDA USB dongle I've stumbled upon memory leak in mcs_net_close(). Patch below fixes it. Signed-off-by: Hinko Kocevar Signed-off-by: Samuel Ortiz Signed-off-by: David S. Miller --- drivers/net/irda/mcs7780.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/irda/mcs7780.c b/drivers/net/irda/mcs7780.c index 0b769192d4ce..93916cf33f29 100644 --- a/drivers/net/irda/mcs7780.c +++ b/drivers/net/irda/mcs7780.c @@ -677,6 +677,8 @@ static int mcs_net_close(struct net_device *netdev) /* Stop transmit processing */ netif_stop_queue(netdev); + kfree_skb(mcs->rx_buff.skb); + /* kill and free the receive and transmit URBs */ usb_kill_urb(mcs->rx_urb); usb_free_urb(mcs->rx_urb); -- cgit v1.2.3-59-g8ed1b From 2638698df30b7b57a8dad7029a0c89fe6c4f6783 Mon Sep 17 00:00:00 2001 From: Hinko Kocevar Date: Sun, 16 Dec 2007 14:08:58 -0800 Subject: [IRDA]: irlmp_unregister_link() needs to free lsaps. While testing the mcs7780 based IrDA USB dongle I've stumbled upon memory leak in irlmp_unregister_link(). Hashbin for lsaps is created in irlmp_register_link and should probably be freed in irlmp_unregister_link(). Signed-off-by: Hinko Kocevar Signed-off-by: Samuel Ortiz Signed-off-by: David S. Miller --- net/irda/irlmp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/irda/irlmp.c b/net/irda/irlmp.c index cedff8068fbc..f24cb755908e 100644 --- a/net/irda/irlmp.c +++ b/net/irda/irlmp.c @@ -353,6 +353,7 @@ void irlmp_unregister_link(__u32 saddr) /* Final cleanup */ del_timer(&link->idle_timer); link->magic = 0; + hashbin_delete(link->lsaps, (FREE_FUNC) __irlmp_close_lsap); kfree(link); } } -- cgit v1.2.3-59-g8ed1b From ea332912b8a2e0b2f51ac3b6c197b71d3a18cbb7 Mon Sep 17 00:00:00 2001 From: Olaf Hartmann Date: Sun, 16 Dec 2007 14:09:44 -0800 Subject: [IRDA]: stir4200 fixes. From: Olaf Hartmann The attached patch observes the stir4200 fifo size and will clear the fifo, if the size is increasing, while it should be transmitting bytes Signed-off-by: Samuel Ortiz Signed-off-by: David S. Miller --- drivers/net/irda/stir4200.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/irda/stir4200.c b/drivers/net/irda/stir4200.c index 042bc2f0417d..e59c485bc497 100644 --- a/drivers/net/irda/stir4200.c +++ b/drivers/net/irda/stir4200.c @@ -142,9 +142,6 @@ enum StirCtrl2Mask { }; enum StirFifoCtlMask { - FIFOCTL_EOF = 0x80, - FIFOCTL_UNDER = 0x40, - FIFOCTL_OVER = 0x20, FIFOCTL_DIR = 0x10, FIFOCTL_CLR = 0x08, FIFOCTL_EMPTY = 0x04, @@ -594,9 +591,10 @@ static int fifo_txwait(struct stir_cb *stir, int space) { int err; unsigned long count, status; + unsigned long prev_count = 0x1fff; /* Read FIFO status and count */ - for(;;) { + for (;; prev_count = count) { err = read_reg(stir, REG_FIFOCTL, stir->fifo_status, FIFO_REGS_SIZE); if (unlikely(err != FIFO_REGS_SIZE)) { @@ -629,6 +627,10 @@ static int fifo_txwait(struct stir_cb *stir, int space) if (space >= 0 && STIR_FIFO_SIZE - 4 > space + count) return 0; + /* queue confused */ + if (prev_count < count) + break; + /* estimate transfer time for remaining chars */ msleep((count * 8000) / stir->speed); } -- cgit v1.2.3-59-g8ed1b From a26e01d71622a4cecad06ce85bcab3ed878e7f83 Mon Sep 17 00:00:00 2001 From: Richard Knutsson Date: Sun, 16 Dec 2007 14:10:33 -0800 Subject: [IRDA]: irda parameters warning fixes. This patch fixes: CHECK /home/kernel/src/net/irda/parameters.c /home/kernel/src/net/irda/parameters.c:466:2: warning: Using plain integer as NULL pointer /home/kernel/src/net/irda/parameters.c:520:2: warning: Using plain integer as NULL pointer /home/kernel/src/net/irda/parameters.c:573:2: warning: Using plain integer as NULL pointer Signed-off-by: Richard Knutsson Signed-off-by: Samuel Ortiz Signed-off-by: David S. Miller --- net/irda/parameters.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/irda/parameters.c b/net/irda/parameters.c index 2627dad7cd87..7183e9ef7996 100644 --- a/net/irda/parameters.c +++ b/net/irda/parameters.c @@ -463,7 +463,7 @@ int irda_param_insert(void *self, __u8 pi, __u8 *buf, int len, int n = 0; IRDA_ASSERT(buf != NULL, return ret;); - IRDA_ASSERT(info != 0, return ret;); + IRDA_ASSERT(info != NULL, return ret;); pi_minor = pi & info->pi_mask; pi_major = pi >> info->pi_major_offset; @@ -517,7 +517,7 @@ static int irda_param_extract(void *self, __u8 *buf, int len, int n = 0; IRDA_ASSERT(buf != NULL, return ret;); - IRDA_ASSERT(info != 0, return ret;); + IRDA_ASSERT(info != NULL, return ret;); pi_minor = buf[n] & info->pi_mask; pi_major = buf[n] >> info->pi_major_offset; @@ -570,7 +570,7 @@ int irda_param_extract_all(void *self, __u8 *buf, int len, int n = 0; IRDA_ASSERT(buf != NULL, return ret;); - IRDA_ASSERT(info != 0, return ret;); + IRDA_ASSERT(info != NULL, return ret;); /* * Parse all parameters. Each parameter must be at least two bytes -- cgit v1.2.3-59-g8ed1b From 0d01792300c4d7425eabac9095c603cdb411d2a5 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 17 Dec 2007 16:25:48 +0100 Subject: [S390] pud_present/pmd_present bug. Git commit 3610cce87af0693603db171d5b6f6735f5e3dc5b (yeah my own :-/) introduced a bug in regard to pud/pmd table entries. If the address of the page table refered to by a pud/pmd value happens to have zeroes in the lower 32 bits, pud_present and pmd_present return false. The obvious effect is that this triggers the BUG_ON in exit_mmap because some ptes will not get released on process end. Worse is that the next fault for memory covered by that pud/pmd will allocate another pmd/pte table and populate the pud/pmd entry. The old page table entries hanging below this entry are lost! The fix is simple, properly check against 0. The check is added for pud_none/pmd_none as well even if these two functions work because the invalid bit is in the lower 32 bits. Signed-off-by: Martin Schwidefsky --- include/asm-s390/pgtable.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/include/asm-s390/pgtable.h b/include/asm-s390/pgtable.h index f2cc25b74adf..1f530f8a6280 100644 --- a/include/asm-s390/pgtable.h +++ b/include/asm-s390/pgtable.h @@ -453,12 +453,12 @@ static inline int pgd_bad(pgd_t pgd) { return 0; } static inline int pud_present(pud_t pud) { - return pud_val(pud) & _REGION_ENTRY_ORIGIN; + return (pud_val(pud) & _REGION_ENTRY_ORIGIN) != 0UL; } static inline int pud_none(pud_t pud) { - return pud_val(pud) & _REGION_ENTRY_INV; + return (pud_val(pud) & _REGION_ENTRY_INV) != 0UL; } static inline int pud_bad(pud_t pud) @@ -471,12 +471,12 @@ static inline int pud_bad(pud_t pud) static inline int pmd_present(pmd_t pmd) { - return pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN; + return (pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN) != 0UL; } static inline int pmd_none(pmd_t pmd) { - return pmd_val(pmd) & _SEGMENT_ENTRY_INV; + return (pmd_val(pmd) & _SEGMENT_ENTRY_INV) != 0UL; } static inline int pmd_bad(pmd_t pmd) -- cgit v1.2.3-59-g8ed1b From 41a9e680717e82c745b1ead979ea008e9134ea68 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 13 Dec 2007 09:31:34 +0100 Subject: [ARM] 4710/1: Fix coprocessor 14 usage for debug messages via ICEDCC MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to ARM7TDMI Technical Reference Manual (ARM DDI 0210C) writing to the DCC data write register coproc dest registers are 1 and 0, not 0 and 1. ARM920T TRM (ARM DDI 0151C) agrees on that. Cc: Ben Dooks Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/boot/compressed/head.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index b9b03eda70e5..5cac46a19bb7 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -31,7 +31,7 @@ .macro loadsp, rb .endm .macro writeb, ch, rb - mcr p14, 0, \ch, c0, c1, 0 + mcr p14, 0, \ch, c1, c0, 0 .endm #endif -- cgit v1.2.3-59-g8ed1b From 553876c802249b21267b78a9b3857d1341a3df87 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 12 Dec 2007 00:32:58 +0100 Subject: [ARM] 4694/1: IXP4xx: Update clockevent support for shutdown and resume Add proper support for CLOCK_EVT_MODE_RESUME and in the process fix CLOCK_EVT_MODE_SHUTDOWN so that only the enable bits are toggled for both. Signed-off-by: Kevin Hilman Signed-off-by: Russell King --- arch/arm/mach-ixp4xx/common.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index c1271c449246..f6d66dce6852 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -442,7 +442,8 @@ static int ixp4xx_set_next_event(unsigned long evt, static void ixp4xx_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { - unsigned long opts, osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK; + unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK; + unsigned long osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK; switch (mode) { case CLOCK_EVT_MODE_PERIODIC: @@ -455,12 +456,15 @@ static void ixp4xx_set_mode(enum clock_event_mode mode, opts = IXP4XX_OST_ENABLE | IXP4XX_OST_ONE_SHOT; break; case CLOCK_EVT_MODE_SHUTDOWN: + opts &= ~IXP4XX_OST_ENABLE; + break; + case CLOCK_EVT_MODE_RESUME: + opts |= IXP4XX_OST_ENABLE; + break; case CLOCK_EVT_MODE_UNUSED: default: osrt = opts = 0; break; - case CLOCK_EVT_MODE_RESUME: - break; } *IXP4XX_OSRT1 = osrt | opts; -- cgit v1.2.3-59-g8ed1b From 8c4606b1a4f6eb09344294b7f11641f36cd402af Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 4 Dec 2007 14:45:47 +0800 Subject: kobject: fix the documentation of how kobject_set_name works Thanks to Dave Young for pointing out that I forgot to update the comment when I rewrote kobject_set_name. Cc: Dave Young Signed-off-by: Greg Kroah-Hartman --- lib/kobject.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/lib/kobject.c b/lib/kobject.c index b52e9f4ef371..3590f022a609 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -234,13 +234,13 @@ int kobject_register(struct kobject * kobj) /** - * kobject_set_name - Set the name of an object - * @kobj: object. - * @fmt: format string used to build the name + * kobject_set_name - Set the name of a kobject + * @kobj: kobject to name + * @fmt: format string used to build the name * - * If strlen(name) >= KOBJ_NAME_LEN, then use a dynamically allocated - * string that @kobj->k_name points to. Otherwise, use the static - * @kobj->name array. + * This sets the name of the kobject. If you have already added the + * kobject to the system, you must call kobject_rename() in order to + * change the name of the kobject. */ int kobject_set_name(struct kobject * kobj, const char * fmt, ...) { -- cgit v1.2.3-59-g8ed1b From cb8c9b6de076d981ca22801dbd6bce12b0758468 Mon Sep 17 00:00:00 2001 From: Romain Liévin Date: Sat, 1 Dec 2007 08:51:58 +0100 Subject: tipar: remove obsolete module MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit tipar: remove obsolete module The tipar character driver was used to implement bit-banging access to Texas Instruments parallel link cable. A user-land method now exists thru PPDEV & PARPORT. Signed-off-by: Romain Liévin Signed-off-by: Greg Kroah-Hartman --- Documentation/tipar.txt | 93 -------- MAINTAINERS | 5 - drivers/char/Kconfig | 22 -- drivers/char/tipar.c | 557 ------------------------------------------------ include/linux/ticable.h | 44 ---- 5 files changed, 721 deletions(-) delete mode 100644 Documentation/tipar.txt delete mode 100644 drivers/char/tipar.c delete mode 100644 include/linux/ticable.h diff --git a/Documentation/tipar.txt b/Documentation/tipar.txt deleted file mode 100644 index 67133baef6ef..000000000000 --- a/Documentation/tipar.txt +++ /dev/null @@ -1,93 +0,0 @@ - - Parallel link cable for Texas Instruments handhelds - =================================================== - - -Author: Romain Lievin -Homepage: http://lpg.ticalc.org/prj_tidev/index.html - - -INTRODUCTION: - -This is a driver for the very common home-made parallel link cable, a cable -designed for connecting TI8x/9x graphing calculators (handhelds) to a computer -or workstation (Alpha, Sparc). Given that driver is built on parport, the -parallel port abstraction layer, this driver is architecture-independent. - -It can also be used with another device plugged on the same port (such as a -ZIP drive). I have a 100MB ZIP and both of them work fine! - -If you need more information, please visit the 'TI drivers' homepage at the URL -above. - -WHAT YOU NEED: - -A TI calculator and a program capable of communicating with your calculator. - -TiLP will work for sure (since I am its developer!). yal92 may be able to use -it by changing tidev for tipar (may require some hacking...). - -HOW TO USE IT: - -You must have first compiled parport support (CONFIG_PARPORT_DEV): either -compiled in your kernel, either as a module. - -Next, (as root): - - modprobe parport - modprobe tipar - -If it is not already there (it usually is), create the device: - - mknod /dev/tipar0 c 115 0 - mknod /dev/tipar1 c 115 1 - mknod /dev/tipar2 c 115 2 - -You will have to set permissions on this device to allow you to read/write -from it: - - chmod 666 /dev/tipar[0..2] - -Now you are ready to run a linking program such as TiLP. Be sure to configure -it properly (RTFM). - -MODULE PARAMETERS: - - You can set these with: modprobe tipar NAME=VALUE - There is currently no way to set these on a per-cable basis. - - NAME: timeout - TYPE: integer - DEFAULT: 15 - DESC: Timeout value in tenth of seconds. If no data is available once this - time has expired then the driver will return with a timeout error. - - NAME: delay - TYPE: integer - DEFAULT: 10 - DESC: Inter-bit delay in micro-seconds. A lower value gives an higher data - rate but makes transmission less reliable. - -These parameters can be changed at run time by any program via ioctl(2) calls -as listed in ./include/linux/ticable.h. - -Rather than write 50 pages describing the ioctl() and so on, it is -perhaps more useful you look at ticables library (dev_link.c) that demonstrates -how to use them, and demonstrates the features of the driver. This is -probably a lot more useful to people interested in writing applications -that will be using this driver. - -QUIRKS/BUGS: - -None. - -HOW TO CONTACT US: - -You can email me at roms@lpg.ticalc.org. Please prefix the subject line -with "TIPAR: " so that I am certain to notice your message. -You can also mail JB at jb@jblache.org. He packaged these drivers for Debian. - -CREDITS: - -The code is based on tidev.c & parport.c. -The driver has been developed independently of Texas Instruments. diff --git a/MAINTAINERS b/MAINTAINERS index 9507b4207512..a7caced39bfa 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3699,11 +3699,6 @@ M: nagar@watson.ibm.com L: linux-kernel@vger.kernel.org S: Maintained -TI PARALLEL LINK CABLE DRIVER -P: Romain Lievin -M: roms@lpg.ticalc.org -S: Maintained - TIPC NETWORK LAYER P: Per Liden M: per.liden@ericsson.com diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index a509b8d79781..ef1ed5d70125 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -543,28 +543,6 @@ config PPDEV If unsure, say N. -config TIPAR - tristate "Texas Instruments parallel link cable support" - depends on PARPORT - ---help--- - If you own a Texas Instruments graphing calculator and use a - parallel link cable, then you might be interested in this driver. - - If you enable this driver, you will be able to communicate with - your calculator through a set of device nodes under /dev. The - main advantage of this driver is that you don't have to be root - to use this precise link cable (depending on the permissions on - the device nodes, though). - - To compile this driver as a module, choose M here: the - module will be called tipar. - - If you don't know what a parallel link cable is or what a Texas - Instruments graphing calculator is, then you probably don't need this - driver. - - If unsure, say N. - config HVC_DRIVER bool help diff --git a/drivers/char/tipar.c b/drivers/char/tipar.c deleted file mode 100644 index cef55c40654f..000000000000 --- a/drivers/char/tipar.c +++ /dev/null @@ -1,557 +0,0 @@ -/* Hey EMACS -*- linux-c -*- - * - * tipar - low level driver for handling a parallel link cable designed - * for Texas Instruments graphing calculators (http://lpg.ticalc.org). - * A part of the TiLP project. - * - * Copyright (C) 2000-2002, Romain Lievin - * under the terms of the GNU General Public License. - * - * Various fixes & clean-up from the Linux Kernel Mailing List - * (Alan Cox, Richard B. Johnson, Christoph Hellwig). - */ - -/* This driver should, in theory, work with any parallel port that has an - * appropriate low-level driver; all I/O is done through the parport - * abstraction layer. - * - * If this driver is built into the kernel, you can configure it using the - * kernel command-line. For example: - * - * tipar=timeout,delay (set timeout and delay) - * - * If the driver is loaded as a module, similar functionality is available - * using module parameters. The equivalent of the above commands would be: - * - * # insmod tipar timeout=15 delay=10 - */ - -/* COMPATIBILITY WITH OLD KERNELS - * - * Usually, parallel cables were bound to ports at - * particular I/O addresses, as follows: - * - * tipar0 0x378 - * tipar1 0x278 - * tipar2 0x3bc - * - * - * This driver, by default, binds tipar devices according to parport and - * the minor number. - * - */ -#undef DEBUG /* change to #define to get debugging - * output - for pr_debug() */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include /* Our code depend on parport */ -#include - -/* - * TI definitions - */ -#include - -/* - * Version Information - */ -#define DRIVER_VERSION "1.19" -#define DRIVER_AUTHOR "Romain Lievin " -#define DRIVER_DESC "Device driver for TI/PC parallel link cables" -#define DRIVER_LICENSE "GPL" - -#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq)) - -/* ----- global variables --------------------------------------------- */ - -struct tipar_struct { - struct pardevice *dev; /* Parport device entry */ -}; - -#define PP_NO 3 -static struct tipar_struct table[PP_NO]; - -static int delay = IO_DELAY; /* inter-bit delay in microseconds */ -static int timeout = TIMAXTIME; /* timeout in tenth of seconds */ - -static unsigned int tp_count; /* tipar count */ -static unsigned long opened; /* opened devices */ - -static struct class *tipar_class; - -/* --- macros for parport access -------------------------------------- */ - -#define r_dtr(x) (parport_read_data(table[(x)].dev->port)) -#define r_str(x) (parport_read_status(table[(x)].dev->port)) -#define w_ctr(x,y) (parport_write_control(table[(x)].dev->port, (y))) -#define w_dtr(x,y) (parport_write_data(table[(x)].dev->port, (y))) - -/* --- setting states on the D-bus with the right timing: ------------- */ - -static inline void -outbyte(int value, int minor) -{ - w_dtr(minor, value); -} - -static inline int -inbyte(int minor) -{ - return (r_str(minor)); -} - -static inline void -init_ti_parallel(int minor) -{ - outbyte(3, minor); -} - -/* ----- global defines ----------------------------------------------- */ - -#define START(x) { x = jiffies + (HZ * timeout) / 10; } -#define WAIT(x) { \ - if (time_before((x), jiffies)) return -1; \ - if (need_resched()) schedule(); } - -/* ----- D-bus bit-banging functions ---------------------------------- */ - -/* D-bus protocol (45kbit/s max): - 1 0 0 - _______ ______|______ __________|________ __________ -Red : ________ | ____ | ____ - _ ____________|________ ______|__________ _____ -White: ________ | ______ | _______ -*/ - -/* Try to transmit a byte on the specified port (-1 if error). */ -static int -put_ti_parallel(int minor, unsigned char data) -{ - unsigned int bit; - unsigned long max; - - for (bit = 0; bit < 8; bit++) { - if (data & 1) { - outbyte(2, minor); - START(max); - do { - WAIT(max); - } while (inbyte(minor) & 0x10); - - outbyte(3, minor); - START(max); - do { - WAIT(max); - } while (!(inbyte(minor) & 0x10)); - } else { - outbyte(1, minor); - START(max); - do { - WAIT(max); - } while (inbyte(minor) & 0x20); - - outbyte(3, minor); - START(max); - do { - WAIT(max); - } while (!(inbyte(minor) & 0x20)); - } - - data >>= 1; - udelay(delay); - - if (need_resched()) - schedule(); - } - - return 0; -} - -/* Receive a byte on the specified port or -1 if error. */ -static int -get_ti_parallel(int minor) -{ - unsigned int bit; - unsigned char v, data = 0; - unsigned long max; - - for (bit = 0; bit < 8; bit++) { - START(max); - do { - WAIT(max); - } while ((v = inbyte(minor) & 0x30) == 0x30); - - if (v == 0x10) { - data = (data >> 1) | 0x80; - outbyte(1, minor); - START(max); - do { - WAIT(max); - } while (!(inbyte(minor) & 0x20)); - outbyte(3, minor); - } else { - data = data >> 1; - outbyte(2, minor); - START(max); - do { - WAIT(max); - } while (!(inbyte(minor) & 0x10)); - outbyte(3, minor); - } - - udelay(delay); - if (need_resched()) - schedule(); - } - - return (int) data; -} - -/* Try to detect a parallel link cable on the specified port */ -static int -probe_ti_parallel(int minor) -{ - int i; - int seq[] = { 0x00, 0x20, 0x10, 0x30 }; - int data; - - for (i = 3; i >= 0; i--) { - outbyte(3, minor); - outbyte(i, minor); - udelay(delay); - data = inbyte(minor) & 0x30; - pr_debug("tipar: Probing -> %i: 0x%02x 0x%02x\n", i, - data, seq[i]); - if (data != seq[i]) { - outbyte(3, minor); - return -1; - } - } - - outbyte(3, minor); - return 0; -} - -/* ----- kernel module functions--------------------------------------- */ - -static int -tipar_open(struct inode *inode, struct file *file) -{ - unsigned int minor = iminor(inode) - TIPAR_MINOR; - - if (tp_count == 0 || minor > tp_count - 1) - return -ENXIO; - - if (test_and_set_bit(minor, &opened)) - return -EBUSY; - - if (!table[minor].dev) { - printk(KERN_ERR "%s: NULL device for minor %u\n", - __FUNCTION__, minor); - return -ENXIO; - } - parport_claim_or_block(table[minor].dev); - init_ti_parallel(minor); - parport_release(table[minor].dev); - - return nonseekable_open(inode, file); -} - -static int -tipar_close(struct inode *inode, struct file *file) -{ - unsigned int minor = iminor(inode) - TIPAR_MINOR; - - if (minor > tp_count - 1) - return -ENXIO; - - clear_bit(minor, &opened); - - return 0; -} - -static ssize_t -tipar_write (struct file *file, const char __user *buf, size_t count, - loff_t * ppos) -{ - unsigned int minor = iminor(file->f_path.dentry->d_inode) - TIPAR_MINOR; - ssize_t n; - - parport_claim_or_block(table[minor].dev); - - for (n = 0; n < count; n++) { - unsigned char b; - - if (get_user(b, buf + n)) { - n = -EFAULT; - goto out; - } - - if (put_ti_parallel(minor, b) == -1) { - init_ti_parallel(minor); - n = -ETIMEDOUT; - goto out; - } - } - out: - parport_release(table[minor].dev); - return n; -} - -static ssize_t -tipar_read(struct file *file, char __user *buf, size_t count, loff_t * ppos) -{ - int b = 0; - unsigned int minor = iminor(file->f_path.dentry->d_inode) - TIPAR_MINOR; - ssize_t retval = 0; - ssize_t n = 0; - - if (count == 0) - return 0; - - parport_claim_or_block(table[minor].dev); - - while (n < count) { - b = get_ti_parallel(minor); - if (b == -1) { - init_ti_parallel(minor); - retval = -ETIMEDOUT; - goto out; - } else { - if (put_user(b, buf + n)) { - retval = -EFAULT; - break; - } else - retval = ++n; - } - - /* Non-blocking mode : try again ! */ - if (file->f_flags & O_NONBLOCK) { - retval = -EAGAIN; - goto out; - } - - /* Signal pending, try again ! */ - if (signal_pending(current)) { - retval = -ERESTARTSYS; - goto out; - } - - if (need_resched()) - schedule(); - } - - out: - parport_release(table[minor].dev); - return retval; -} - -static int -tipar_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) -{ - int retval = 0; - - switch (cmd) { - case IOCTL_TIPAR_DELAY: - delay = (int)arg; //get_user(delay, &arg); - break; - case IOCTL_TIPAR_TIMEOUT: - if (arg != 0) - timeout = (int)arg; - else - retval = -EINVAL; - break; - default: - retval = -ENOTTY; - break; - } - - return retval; -} - -/* ----- kernel module registering ------------------------------------ */ - -static const struct file_operations tipar_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .read = tipar_read, - .write = tipar_write, - .ioctl = tipar_ioctl, - .open = tipar_open, - .release = tipar_close, -}; - -/* --- initialisation code ------------------------------------- */ - -#ifndef MODULE -/* You must set these - there is no sane way to probe for this cable. - * You can use 'tipar=timeout,delay' to set these now. */ -static int __init -tipar_setup(char *str) -{ - int ints[3]; - - str = get_options(str, ARRAY_SIZE(ints), ints); - - if (ints[0] > 0) { - if (ints[1] != 0) - timeout = ints[1]; - else - printk(KERN_WARNING "tipar: bad timeout value (0), " - "using default value instead"); - if (ints[0] > 1) { - delay = ints[2]; - } - } - - return 1; -} -#endif - -/* - * Register our module into parport. - * Pass also 2 callbacks functions to parport: a pre-emptive function and an - * interrupt handler function (unused). - * Display a message such "tipar0: using parport0 (polling)". - */ -static int -tipar_register(int nr, struct parport *port) -{ - int err = 0; - - /* Register our module into parport */ - table[nr].dev = parport_register_device(port, "tipar", - NULL, NULL, NULL, 0, - (void *) &table[nr]); - - if (table[nr].dev == NULL) { - err = 1; - goto out; - } - - device_create(tipar_class, port->dev, MKDEV(TIPAR_MAJOR, - TIPAR_MINOR + nr), "par%d", nr); - - /* Display informations */ - pr_info("tipar%d: using %s (%s)\n", nr, port->name, (port->irq == - PARPORT_IRQ_NONE) ? "polling" : "interrupt-driven"); - - if (probe_ti_parallel(nr) != -1) - pr_info("tipar%d: link cable found\n", nr); - else - pr_info("tipar%d: link cable not found\n", nr); - - err = 0; - -out: - return err; -} - -static void -tipar_attach(struct parport *port) -{ - if (tp_count == PP_NO) { - pr_info("tipar: ignoring parallel port (max. %d)\n", PP_NO); - return; - } - - if (!tipar_register(tp_count, port)) - tp_count++; -} - -static void -tipar_detach(struct parport *port) -{ - /* Nothing to do */ -} - -static struct parport_driver tipar_driver = { - .name = "tipar", - .attach = tipar_attach, - .detach = tipar_detach, -}; - -static int __init -tipar_init_module(void) -{ - int err = 0; - - pr_info("tipar: parallel link cable driver, version %s\n", - DRIVER_VERSION); - - if (register_chrdev(TIPAR_MAJOR, "tipar", &tipar_fops)) { - printk(KERN_ERR "tipar: unable to get major %d\n", TIPAR_MAJOR); - err = -EIO; - goto out; - } - - tipar_class = class_create(THIS_MODULE, "ticables"); - if (IS_ERR(tipar_class)) { - err = PTR_ERR(tipar_class); - goto out_chrdev; - } - if (parport_register_driver(&tipar_driver)) { - printk(KERN_ERR "tipar: unable to register with parport\n"); - err = -EIO; - goto out_class; - } - - err = 0; - goto out; - -out_class: - class_destroy(tipar_class); - -out_chrdev: - unregister_chrdev(TIPAR_MAJOR, "tipar"); -out: - return err; -} - -static void __exit -tipar_cleanup_module(void) -{ - unsigned int i; - - /* Unregistering module */ - parport_unregister_driver(&tipar_driver); - - unregister_chrdev(TIPAR_MAJOR, "tipar"); - - for (i = 0; i < PP_NO; i++) { - if (table[i].dev == NULL) - continue; - parport_unregister_device(table[i].dev); - device_destroy(tipar_class, MKDEV(TIPAR_MAJOR, i)); - } - class_destroy(tipar_class); - - pr_info("tipar: module unloaded\n"); -} - -/* --------------------------------------------------------------------- */ - -__setup("tipar=", tipar_setup); -module_init(tipar_init_module); -module_exit(tipar_cleanup_module); - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE(DRIVER_LICENSE); - -module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, "Timeout (default=1.5 seconds)"); -module_param(delay, int, 0); -MODULE_PARM_DESC(delay, "Inter-bit delay (default=10 microseconds)"); diff --git a/include/linux/ticable.h b/include/linux/ticable.h deleted file mode 100644 index 8c2212086dcd..000000000000 --- a/include/linux/ticable.h +++ /dev/null @@ -1,44 +0,0 @@ -/* Hey EMACS -*- linux-c -*- - * - * tipar/tiser/tiusb - low level driver for handling link cables - * designed for Texas Instruments graphing calculators. - * - * Copyright (C) 2000-2002, Romain Lievin - * - * Redistribution of this file is permitted under the terms of the GNU - * Public License (GPL) - */ - -#ifndef _TICABLE_H -#define _TICABLE_H 1 - -/* Internal default constants for the kernel module */ -#define TIMAXTIME 15 /* 1.5 seconds */ -#define IO_DELAY 10 /* 10 micro-seconds */ - -/* Major & minor number for character devices */ -#define TIPAR_MAJOR 115 /* 0 to 7 */ -#define TIPAR_MINOR 0 - -#define TISER_MAJOR 115 /* 8 to 15 */ -#define TISER_MINOR 8 - -#define TIUSB_MAJOR 115 /* 16 to 31 */ -#define TIUSB_MINOR 16 - -/* - * Request values for the 'ioctl' function. - */ -#define IOCTL_TIPAR_DELAY _IOW('p', 0xa8, int) /* set delay */ -#define IOCTL_TIPAR_TIMEOUT _IOW('p', 0xa9, int) /* set timeout */ - -#define IOCTL_TISER_DELAY _IOW('p', 0xa0, int) /* set delay */ -#define IOCTL_TISER_TIMEOUT _IOW('p', 0xa1, int) /* set timeout */ - -#define IOCTL_TIUSB_TIMEOUT _IOW('N', 0x20, int) /* set timeout */ -#define IOCTL_TIUSB_RESET_DEVICE _IOW('N', 0x21, int) /* reset device */ -#define IOCTL_TIUSB_RESET_PIPES _IOW('N', 0x22, int) /* reset both pipes*/ -#define IOCTL_TIUSB_GET_MAXPS _IOR('N', 0x23, int) /* max packet size */ -#define IOCTL_TIUSB_GET_DEVID _IOR('N', 0x24, int) /* get device type */ - -#endif /* TICABLE_H */ -- cgit v1.2.3-59-g8ed1b From e11d044efdd2e5c837c4d470fc447b49a9aebfe1 Mon Sep 17 00:00:00 2001 From: Tsugikazu Shibata Date: Fri, 30 Nov 2007 18:59:18 +0900 Subject: HOWTO: Change man-page maintainer address for Japanese HOWTO Below is a patch to change email address of man-page maintainer for Japanese HOWTO document (Documentation/ja_JP/HOWTO). This is for sync to Documentation/HOWTO that Michael Kerrisk mentioned to me. From: Tsugikazu Shibata Signed-off-by: Greg Kroah-Hartman --- Documentation/ja_JP/HOWTO | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/ja_JP/HOWTO b/Documentation/ja_JP/HOWTO index d9d832c010ef..488c77fa3aae 100644 --- a/Documentation/ja_JP/HOWTO +++ b/Documentation/ja_JP/HOWTO @@ -11,14 +11,14 @@ for non English (read: Japanese) speakers and is not intended as a fork. So if you have any comments or updates for this file, please try to update the original English file first. -Last Updated: 2007/09/23 +Last Updated: 2007/11/16 ================================== これは、 -linux-2.6.23/Documentation/HOWTO +linux-2.6.24/Documentation/HOWTO の和訳です。 翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ > -翻訳日： 2007/09/19 +翻訳日： 2007/11/10 翻訳者： Tsugikazu Shibata 校正者： 松倉さん 小林 雅典さん (Masanori Kobayasi) @@ -110,7 +110,7 @@ Linux カーネルソースツリーは幅広い範囲のドキュメントを 新しいドキュメントファイルも追加することを勧めます。 カーネルの変更が、カーネルがユーザ空間に公開しているインターフェイスの 変更を引き起こす場合、その変更を説明するマニュアルページのパッチや情報 -をマニュアルページのメンテナ mtk-manpages@gmx.net に送ることを勧めま +をマニュアルページのメンテナ mtk.manpages@gmail.com に送ることを勧めま す。 以下はカーネルソースツリーに含まれている読んでおくべきファイルの一覧で -- cgit v1.2.3-59-g8ed1b From 0594fe069df5a10686a3b923b36a0e7a6aed2393 Mon Sep 17 00:00:00 2001 From: Dhaval Giani Date: Wed, 12 Dec 2007 11:18:59 +0530 Subject: Add Documentation for FAIR_USER_SCHED sysfs files This patch adds documentation about /sys/kernel/uids//cpu_share to Documentation/ABI. Signed-off-by: Dhaval Giani Cc: Ingo Molnar Signed-off-by: Greg Kroah-Hartman --- Documentation/ABI/testing/sysfs-kernel-uids | 14 ++++++++++++++ 1 file changed, 14 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-kernel-uids diff --git a/Documentation/ABI/testing/sysfs-kernel-uids b/Documentation/ABI/testing/sysfs-kernel-uids new file mode 100644 index 000000000000..648d65dbc0e7 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-kernel-uids @@ -0,0 +1,14 @@ +What: /sys/kernel/uids//cpu_shares +Date: December 2007 +Contact: Dhaval Giani + Srivatsa Vaddagiri +Description: + The /sys/kernel/uids//cpu_shares tunable is used + to set the cpu bandwidth a user is allowed. This is a + propotional value. What that means is that if there + are two users logged in, each with an equal number of + shares, then they will get equal CPU bandwidth. Another + example would be, if User A has shares = 1024 and user + B has shares = 2048, User B will get twice the CPU + bandwidth user A will. For more details refer + Documentation/sched-design-CFS.txt -- cgit v1.2.3-59-g8ed1b From 57e1fd1f589414258dbbac8e0ea7bc2af8344ec3 Mon Sep 17 00:00:00 2001 From: minchan kim Date: Thu, 13 Dec 2007 11:47:17 +0900 Subject: HOWTO: change addresses of maintainer and lxr url for Korean HOWTO So sorry. again My mail is set with EUC-kR. I'll resend with UTF-8. Signed-off-by: barrios Signed-off-by: Greg Kroah-Hartman --- Documentation/ko_KR/HOWTO | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/ko_KR/HOWTO b/Documentation/ko_KR/HOWTO index b51d7ca842ba..a69135baff0d 100644 --- a/Documentation/ko_KR/HOWTO +++ b/Documentation/ko_KR/HOWTO @@ -90,7 +90,7 @@ GPL에 관한 잦은 질문들과 답변들은 다음을 참조하라. 그 기능을 어떻게 사용하는지에 관한 설명을 위하여 새로운 문서 파일을 추가하는 것을 권장한다. 커널이 유저스페이스로 노출하는 인터페이스를 변경하게 되면 변경을 설명하는 메뉴얼 페이지들에 대한 패치나 정보를 -mtk-manpages@gmx.net의 메인트너에게 보낼 것을 권장한다. +mtk.manpages@gmail.com의 메인트너에게 보낼 것을 권장한다. 다음은 커널 소스 트리에 있는 읽어야 할 파일들의 리스트이다. README @@ -212,7 +212,7 @@ Documentation/DocBook/ 디렉토리 내에서 만들어지며 PDF, Postscript, H 것은 Linux Cross-Reference project이며 그것은 자기 참조 방식이며 소스코드를 인덱스된 웹 페이지들의 형태로 보여준다. 최신의 멋진 커널 코드 저장소는 다음을 통하여 참조할 수 있다. - http://sosdg.org/~coywolf/lxr/ + http://users.sosdg.org/~qiyong/lxr/ 개발 프로세스 @@ -327,7 +327,7 @@ Andrew Morton에 의해 배포된 실험적인 커널 패치들이다. Andrew는 - ACPI development tree, Len Brown git.kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git - - Block development tree, Jens Axboe + - Block development tree, Jens Axboe git.kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git - DRM development tree, Dave Airlie -- cgit v1.2.3-59-g8ed1b From 83f88044b45c71df6af72053a3eb9383bb9291d6 Mon Sep 17 00:00:00 2001 From: barrios Date: Sat, 15 Dec 2007 10:21:33 +0900 Subject: add stable_api_nonsense.txt in korean Signed-off-by: barrios Signed-off-by: Greg Kroah-Hartman --- Documentation/ko_KR/stable_api_nonsense.txt | 195 ++++++++++++++++++++++++++++ 1 file changed, 195 insertions(+) create mode 100644 Documentation/ko_KR/stable_api_nonsense.txt diff --git a/Documentation/ko_KR/stable_api_nonsense.txt b/Documentation/ko_KR/stable_api_nonsense.txt new file mode 100644 index 000000000000..8f2b0e1d98c4 --- /dev/null +++ b/Documentation/ko_KR/stable_api_nonsense.txt @@ -0,0 +1,195 @@ +NOTE: +This is a version of Documentation/stable_api_nonsense.txt translated +into korean +This document is maintained by barrios +If you find any difference between this document and the original file or +a problem with the translation, please contact the maintainer of this file. + +Please also note that the purpose of this file is to be easier to +read for non English (read: korean) speakers and is not intended as +a fork. So if you have any comments or updates for this file please +try to update the original English file first. + +================================== +이 문서는 +Documentation/stable_api_nonsense.txt +의 한글 번역입니다. + +역자： 김민찬 +감수： 이제이미 +================================== + +리눅스 커널 드라이버 인터페이스 +(여러분들의 모든 질문에 대한 답 그리고 다른 몇가지) + +Greg Kroah-Hartman + +이 문서는 리눅스가 왜 바이너리 커널 인터페이스를 갖지 않는지, 왜 변하지 +않는(stable) 커널 인터페이스를 갖지 않는지를 설명하기 위해 쓰여졌다. +이 문서는 커널과 유저공간 사이의 인터페이스가 아니라 커널 내부의 +인터페이스들을 설명하고 있다는 것을 유념하라. 커널과 유저공간 사이의 +인터페이스는 응용프로그램이 사용하는 syscall 인터페이스이다. 그 인터페이스는 +오랫동안 거의 변하지 않았고 앞으로도 변하지 않을 것이다. 나는 pre 0.9에서 +만들어졌지만 최신의 2.6 커널 배포에서도 잘 동작하는 프로그램을 가지고 +있다. 이 인터페이스는 사용자와 응용프로그램 개발자들이 변하지 않을 것이라고 +여길수 있는 것이다. + + +초록 +---- +여러분은 변하지 않는 커널 인터페이스를 원한다고 생각하지만 실제로는 +그렇지 않으며 심지어는 그것을 알아채지 못한다. 여러분이 원하는 것은 +안정되게 실행되는 드라이버이며 드라이버가 메인 커널 트리에 있을 때 +그런 안정적인 드라이버를 얻을 수 있게 된다. 또한 여러분의 드라이버가 +메인 커널 트리에 있다면 다른 많은 좋은 이점들을 얻게 된다. 그러한 것들이 +리눅스를 강건하고, 안정적이며, 성숙한 운영체제로 만들어 놓음으로써 +여러분들로 하여금 바로 리눅스를 사용하게 만드는 이유이다. + + +소개 +---- + +커널 내부의 인터페이스가 바뀌는 것을 걱정하며 커널 드라이버를 작성하고 +싶어하는 사람은 정말 이상한 사람이다. 세상의 대다수의 사람들은 이 인터페이스를 +보지못할 것이며 전혀 걱정하지도 않는다. + +먼저, 나는 closed 소스, hidden 소스, binary blobs, 소스 wrappers, 또는 GPL로 +배포되었지만 소스 코드를 갖고 있지 않은 커널 드라이버들을 설명하는 어떤 다른 +용어들에 관한 어떤 법적인 문제에 관해서는 언급하지 않을 것이다. 어떤 법적인 +질문들을 가지고 있다면 변호사와 연락하라. 나는 프로그래머이므로 여기서 기술적인 +문제들만을 설명하려고 한다. (법적인 문제를 경시하는 것은 아니다. 그런 문제들은 +엄연히 현실에 있고 여러분들은 항상 그 문제들을 인식하고 있을 필요는 있다.) + +자, 두가지의 주요 주제가 있다. 바이너리 커널 인터페이스들과 변하지 않는 +커널 소스 인터페이들. 그것들은 서로 의존성을 가지고 있지만 바이너리 +문제를 먼저 풀고 넘어갈 것이다. + + + +바이너리 커널 인터페이스 +------------------------ +우리가 변하지 않는 커널 소스 인터페이스를 가지고 있다고 가정하자. 그러면 +바이너리 인터페이스 또한 자연적으로 변하지 않을까? 틀렸다. 리눅스 커널에 +관한 다음 사실들을 생각해보라. + - 여러분들이 사용하는 C 컴파일러의 버젼에 따라 다른 커널 자료 구조들은 + 다른 alignmnet들을 갖게 될것이고 다른 방법으로(함수들을 inline으로 + 했느냐, 아니냐) 다른 함수들을 포함하는 것도 가능한다. 중요한 것은 + 개별적인 함수 구성이 아니라 자료 구조 패딩이 달라진다는 점이다. + - 여러분이 선택한 커널 빌드 옵션에 따라서 커널은 다양한 것들을 가정할 + 수 있다. + - 다른 구조체들은 다른 필드들을 포함할 수 있다. + - 몇몇 함수들은 전혀 구현되지 않을 수도 있다(즉, 몇몇 lock들은 + non-SMP 빌드에서는 사라져 버릴수도 있다). + - 커널내에 메모리는 build optoin들에 따라 다른 방법으로 align될수 + 있다. + - 리눅스는 많은 다양한 프로세서 아키텍쳐에서 실행된다. 한 아키텍쳐의 + 바이너리 드라이버를 다른 아키텍쳐에서 정상적으로 실행시킬 방법은 + 없다. + +커널을 빌드했던 C 컴파일러와 정확하게 같은 것을 사용하고 정확하게 같은 +커널 구성(configuration)을 사용하여 여러분들의 모듈을 빌드하면 간단히 +많은 문제들을 해결할 수 있다. 이렇게 하는 것은 여러분들이 하나의 리눅스 +배포판의 하나의 배포 버젼을 위한 모듈만을 제공한다면 별일 아닐 것이다. +그러나 각기 다른 리눅스 배포판마다 한번씩 빌드하는 수를 각 리눅스 배포판마다 +제공하는 다른 릴리즈의 수와 곱하게 되면 이번에는 각 릴리즈들의 다른 빌드 +옵션의 악몽과 마주하게 것이다. 또한 각 리눅스 배포판들은 다른 하드웨어 +종류에(다른 프로세서 타입과 다른 옵션들) 맞춰져 있는 많은 다른 커널들을 +배포한다. 그러므로 한번의 배포에서조차 여러분들의 모듈은 여러 버젼을 +만들 필요가 있다. + +나를 믿어라. 여러분들은 이러한 종류의 배포를 지원하려고 시도한다면 시간이 +지나면 미칠지경이 될 것이다. 난 이러한 것을 오래전에 아주 어렵게 배웠다... + + + +변하지않는 커널 소스 인터페이스들 +--------------------------------- + +리눅스 커널 드라이버를 계속해서 메인 커널 트리에 반영하지 않고 +유지보수하려고 하는 사름들과 이 문제를 논의하게 되면 훨씬 더 +"논란의 여지가 많은" 주제가 될 것이다. + +리눅스 커널 개발은 끊임없이 빠른 속도로 이루어지고 있으며 결코 +느슨해진 적이 없다. 커널 개발자들이 현재 인터페이스들에서 버그를 +발견하거나 무엇인가 할수 있는 더 좋은 방법을 찾게 되었다고 하자. +그들이 발견한 것을 실행한다면 아마도 더 잘 동작하도록 현재 인터페이스들을 +수정하게 될 것이다. 그들이 그런 일을 하게되면 함수 이름들은 변하게 되고, +구조체들은 늘어나거나 줄어들게 되고, 함수 파라미터들은 재작업될 것이다. +이러한 일이 발생되면 커널 내에 이 인터페이스를 사용했던 인스턴스들이 동시에 +수정될 것이며 이러한 과정은 모든 것이 계속해서 올바르게 동작할 것이라는 +것을 보장한다. + +이러한 것의 한 예로써, 커널 내부의 USB 인터페이스들은 이 서브시스템이 +생긴 이후로 적어도 3번의 다른 재작업을 겪었다. 이 재작업들은 많은 다른 +문제들을 풀었다. + - 데이터 스트림들의 동기적인 모델에서 비동기적인 모델로의 변화. 이것은 + 많은 드라이버들의 복잡성을 줄이고 처리량을 향상시켜 현재는 거의 모든 + USB 장치들의 거의 최대 속도로 실행되고 있다. + - USB 드라이버가 USB 코어로부터 데이터 패킷들을 할당받로록 한 변경으로 + 인해서 지금의 모든 드라이버들은 많은 문서화된 데드락을 수정하기 위하여 + USB 코어에게 더 많은 정보를 제공해야만 한다. + +이것은 오랫동안 자신의 오래된 USB 인터페이스들을 유지해야 하는 closed 운영체제들과는 +완전히 반대되는 것이다. closed된 운영체제들은 새로운 개발자들에게 우연히 낡은 +인터페이스를 사용하게 할 기회를 주게되며, 적절하지 못한 방법으로 처리하게 되어 +운영체제의 안정성을 해치는 문제를 야기하게 된다. + +이 두가지의 예들 모두, 모든 개발자들은 꼭 이루어져야 하는 중요한 변화들이라고 +동의를 하였고 비교적 적은 고통으로 변경되어졌다. 리눅스가 변하지 않는 소스 +인터페이스를 고집한다면, 새로운 인터페이스가 만들어지게 되며 반면 기존의 오래된 +것들, 그리고 깨진 것들은 계속해서 유지되어야 하며 이러한 일들은 USB 개발자들에게 +또 다른 일거리를 주게 된다. 모든 리눅스 USB 개발자들에게 자신의 그들의 업무를 +마친 후 시간을 투자하여 아무 득도 없는 무료 봉사를 해달라고 하는 것은 가능성이 +희박한 일이다. + +보안 문제 역시 리눅스에게는 매우 중요하다. 보안 문제가 발견되면 그것은 +매우 짧은 시간 안에 수정된다. 보안 문제는 그 문제를 해결하기 위하여 +여러번 내부 커널 인터페이스들을 재작업하게 만들었다. 이러한 문제가 +발생하였을 때 그 인터페이스들을 사용하는 모든 드라이버들도 동시에 +수정되어 보안 문제가 앞으로 갑작스럽게 생기지는 않을 것이라는 것을 +보장한다. 내부 인터페이스들의 변경이 허락되지 않으면 이러한 종류의 보안 +문제를 수정하고 그것이 다시 발생하지 않을 것이라고 보장하는 것은 가능하지 +않을 것이다. + +커널 인터페이스들은 계속해서 정리되고 있다. 현재 인터페이스를 사용하는 +사람이 한명도 없다면 그것은 삭제된다. 이것은 커널이 가능한한 가장 작게 +유지되며 존재하는 모든 가능성이 있는 인터페이스들이 테스트된다는 것을 +보장한다(사용되지 않는 인터페이스들은 유효성 검증을 하기가 거의 불가능하다). + + +무엇을 해야 하나 +--------------- +자, 여러분이 메인 커널 트리에 있지 않은 리눅스 커널 드라이버를 가지고 +있다면 여러분은 즉, 개발자는 무엇을 해야 하나? 모든 배포판마다 다른 +커널 버젼을 위한 바이너리 드라이버를 배포하는 것은 악몽이며 계속해서 +변하고 있는 커널 인터페이스들의 맞처 유지보수하려고 시도하는 것은 힘든 +일이다. + +간단하다. 여러분의 커널 드라이버를 메인 커널 트리에 반영하라(우리는 여기서 +GPL을 따르는 배포 드라이버에 관해 얘기하고 있다는 것을 상기하라. 여러분의 +코드가 이러한 분류에 해당되지 않는다면 행운을 빈다. 여러분 스스로 어떻게든 +해야만 한다). 여러분의 드라이버가 트리에 있게되면 커널 인터페이스가 +변경되더라도 가장 먼저 커널에 변경을 가했던 사람에 의해서 수정될 것이다. +이것은 여러분의 드라이버가 여러분의 별다른 노력없이 항상 빌드가 가능하며 +동작하는 것을 보장한다. + +메인 커널 트리에 여러분의 드라이버를 반영하면 얻게 되는 장점들은 다음과 같다. + - 관리의 드는 비용(원래 개발자의)은 줄어줄면서 드라이버의 질은 향상될 것이다. + - 다른 개발자들이 여러분의 드라이버에 기능들을 추가 할 것이다. + - 다른 사람들은 여러분의 드라이버에 버그를 발견하고 수정할 것이다. + - 다른 사람들은 여러분의 드라이버의 개선점을 찾을 줄 것이다. + - 외부 인터페이스 변경으로 인해 여러분의 드라이버의 수정이 필요하다면 다른 + 사람들이 드라이버를 업데이트할 것이다. + - 여러분의 드라이버는 별다른 노력 없이 모든 리눅스 배포판에 자동적으로 + 추가될 것이다. + +리눅스는 다른 운영 체제보다 "쉽게 쓸수 있는(out of the box)" 많은 다른 장치들을 +지원하고 어떤 다른 운영 체제보다 다양한 아키텍쳐위에서 이러한 장치들을 지원하기 때문에 +이러한 증명된 개발 모델은 틀림없이 바로 가고 있는 것이다. + + + +------ + +이 문서의 초안을 검토해주고 코멘트 해준 Randy Dunlap, Andrew Morton, David Brownell, +Hanna Linder, Robert Love, 그리고 Nishanth Aravamudan에게 감사한다. -- cgit v1.2.3-59-g8ed1b From ba3882a9178585289614c16a3b3f9b5f321d27b2 Mon Sep 17 00:00:00 2001 From: barrios Date: Fri, 14 Dec 2007 12:21:15 +0900 Subject: HOWTO: update misspelling and word incorrected Signed-off-by: barrios Signed-off-by: Greg Kroah-Hartman --- Documentation/ko_KR/HOWTO | 140 +++++++++++++++++++++++----------------------- 1 file changed, 71 insertions(+), 69 deletions(-) diff --git a/Documentation/ko_KR/HOWTO b/Documentation/ko_KR/HOWTO index a69135baff0d..029fca914c05 100644 --- a/Documentation/ko_KR/HOWTO +++ b/Documentation/ko_KR/HOWTO @@ -1,6 +1,6 @@ NOTE: This is a version of Documentation/HOWTO translated into korean -This document is maintained by minchan Kim < minchan.kim@gmail.com> +This document is maintained by minchan Kim If you find any difference between this document and the original file or a problem with the translation, please contact the maintainer of this file. @@ -14,7 +14,7 @@ try to update the original English file first. Documentation/HOWTO 의 한글 번역입니다. -역자： 김민찬 +역자： 김민찬 감수： 이제이미 ================================== @@ -23,11 +23,11 @@ Documentation/HOWTO 이 문서는 커널 개발에 있어 가장 중요한 문서이다. 이 문서는 리눅스 커널 개발자가 되는 법과 리눅스 커널 개발 커뮤니티와 일하는 -법을 담고있다. 커널 프로그래밍의기술적인 측면과 관련된 내용들은 -포함하지 않으려고 하였지만 올바으로 여러분을 안내하는 데 도움이 +법을 담고있다. 커널 프로그래밍의 기술적인 측면과 관련된 내용들은 +포함하지 않으려고 하였지만 올바른 길로 여러분을 안내하는 데는 도움이 될 것이다. -이 문서에서 오래된 것을 발견하면 문서의 아래쪽에 나열된 메인트너에게 +이 문서에서 오래된 것을 발견하면 문서의 아래쪽에 나열된 메인테이너에게 패치를 보내달라. @@ -36,12 +36,12 @@ Documentation/HOWTO 자, 여러분은 리눅스 커널 개발자가 되는 법을 배우고 싶은가? 아니면 상사로부터"이 장치를 위한 리눅스 드라이버를 작성하시오"라는 말을 -들었는가? 이 문서는 여러분이 겪게 될 과정과 커뮤니티와 일하는 법을 -조언하여 여러분의 목적을 달성하기 위해 필요한 것 모두를 알려주는 -것이다. +들었는가? 이 문서의 목적은 여러분이 겪게 될 과정과 커뮤니티와 협력하는 +법을 조언하여 여러분의 목적을 달성하기 위해 필요한 것 모두를 알려주기 +위함이다. -커널은 대부분은 C로 작성되었어고 몇몇 아키텍쳐의 의존적인 부분은 -어셈블리로 작성되었다. 커널 개발을 위해 C를 잘 이해하고 있어야 한다. +커널은 대부분은 C로 작성되어 있고 몇몇 아키텍쳐의 의존적인 부분은 +어셈블리로 작성되어 있다. 커널 개발을 위해 C를 잘 이해하고 있어야 한다. 여러분이 특정 아키텍쳐의 low-level 개발을 할 것이 아니라면 어셈블리(특정 아키텍쳐)는 잘 알아야 할 필요는 없다. 다음의 참고서적들은 기본에 충실한 C 교육이나 수년간의 경험에 견주지는 @@ -59,11 +59,11 @@ Documentation/HOWTO 어떤 참고문서도 있지 않다. 정보를 얻기 위해서는 gcc info (`info gcc`)페이지를 살펴보라. -여러분은 기존의 개발 커뮤니티와 일하는 법을 배우려고 하고 있다는 것을 -기억하라. 코딩, 스타일, 절차에 관한 훌륭한 표준을 가진 사람들이 모인 +여러분은 기존의 개발 커뮤니티와 협력하는 법을 배우려고 하고 있다는 것을 +기억하라. 코딩, 스타일, 함수에 관한 훌륭한 표준을 가진 사람들이 모인 다양한 그룹이 있다. 이 표준들은 오랜동안 크고 지역적으로 분산된 팀들에 -의해 가장 좋은 방법으로 일하기위하여 찾은 것을 기초로 만들어져왔다. -그 표준들은 문서화가 잘 되어 있기 때문에 가능한한 미리 많은 표준들에 +의해 가장 좋은 방법으로 일하기 위하여 찾은 것을 기초로 만들어져 왔다. +그 표준들은 문서화가 잘 되어있기 때문에 가능한한 미리 많은 표준들에 관하여 배우려고 시도하라. 다른 사람들은 여러분이나 여러분의 회사가 일하는 방식에 적응하는 것을 원하지는 않는다. @@ -73,7 +73,7 @@ Documentation/HOWTO 리눅스 커널 소스 코드는 GPL로 배포(release)되었다. 소스트리의 메인 디렉토리에 있는 라이센스에 관하여 상세하게 쓰여 있는 COPYING이라는 -파일을 봐라.여러분이 라이센스에 관한 더 깊은 문제를 가지고 있다면 +파일을 봐라. 여러분이 라이센스에 관한 더 깊은 문제를 가지고 있다면 리눅스 커널 메일링 리스트에 묻지말고 변호사와 연락하라. 메일링 리스트들에 있는 사람들은 변호사가 아니기 때문에 법적 문제에 관하여 그들의 말에 의지해서는 안된다. @@ -85,12 +85,12 @@ GPL에 관한 잦은 질문들과 답변들은 다음을 참조하라. 문서 ---- -리눅스 커널 소스 트리는 커널 커뮤니티와 일하는 법을 배우기 위한 많은 -귀중한 문서들을 가지고 있다. 새로운 기능들이 커널에 들어가게 될 때, +리눅스 커널 소스 트리는 커널 커뮤니티와 협력하는 법을 배우기위해 훌륭한 +다양한 문서들을 가지고 있다. 새로운 기능들이 커널에 들어가게 될 때, 그 기능을 어떻게 사용하는지에 관한 설명을 위하여 새로운 문서 파일을 추가하는 것을 권장한다. 커널이 유저스페이스로 노출하는 인터페이스를 변경하게 되면 변경을 설명하는 메뉴얼 페이지들에 대한 패치나 정보를 -mtk.manpages@gmail.com의 메인트너에게 보낼 것을 권장한다. +mtk.manpages@gmail.com의 메인테이너에게 보낼 것을 권장한다. 다음은 커널 소스 트리에 있는 읽어야 할 파일들의 리스트이다. README @@ -105,7 +105,7 @@ mtk.manpages@gmail.com의 메인트너에게 보낼 것을 권장한다. Documentation/CodingStyle 이 문서는 리눅스 커널 코딩 스타일과 그렇게 한 몇몇 이유를 설명한다. 모든 새로운 코드는 이 문서에 가이드라인들을 따라야 한다. 대부분의 - 메인트너들은 이 규칙을 따르는 패치들만을 받아들일 것이고 많은 사람들이 + 메인테이너들은 이 규칙을 따르는 패치들만을 받아들일 것이고 많은 사람들이 그 패치가 올바른 스타일일 경우만 코드를 검토할 것이다. Documentation/SubmittingPatches @@ -115,9 +115,10 @@ mtk.manpages@gmail.com의 메인트너에게 보낼 것을 권장한다. - Email 내용들 - Email 양식 - 그것을 누구에게 보낼지 - 이러한 규칙들을 따르는 것이 성공을 보장하진 않는다(왜냐하면 모든 - 패치들은 내용과 스타일에 관하여 면밀히 검토되기 때문이다). - 그러나 규칙을 따르지 않는다면 거의 성공하지도 못할 것이다. + 이러한 규칙들을 따르는 것이 성공(역자주: 패치가 받아들여 지는 것)을 + 보장하진 않는다(왜냐하면 모든 패치들은 내용과 스타일에 관하여 + 면밀히 검토되기 때문이다). 그러나 규칙을 따르지 않는다면 거의 + 성공하지도 못할 것이다. 올바른 패치들을 만드는 법에 관한 훌륭한 다른 문서들이 있다. "The Perfect Patch" @@ -126,13 +127,13 @@ mtk.manpages@gmail.com의 메인트너에게 보낼 것을 권장한다. http://linux.yyz.us/patch-format.html Documentation/stable_api_nonsense.txt - 이 문서는 의도적으로 커널이 변하지 않는 API를 갖지 않도록 결정한 + 이 문서는 의도적으로 커널이 불변하는 API를 갖지 않도록 결정한 이유를 설명하며 다음과 같은 것들을 포함한다. - 서브시스템 shim-layer(호환성을 위해?) - - 운영 체제들 간의 드라이버 이식성 + - 운영체제들간의 드라이버 이식성 - 커널 소스 트리내에 빠른 변화를 늦추는 것(또는 빠른 변화를 막는 것) 이 문서는 리눅스 개발 철학을 이해하는데 필수적이며 다른 운영체제에서 - 리눅스로 옮겨오는 사람들에게는 매우 중요하다. + 리눅스로 전향하는 사람들에게는 매우 중요하다. Documentation/SecurityBugs @@ -141,10 +142,10 @@ mtk.manpages@gmail.com의 메인트너에게 보낼 것을 권장한다. 도와 달라. Documentation/ManagementStyle - 이 문서는 리눅스 커널 메인트너들이 어떻게 그들의 방법론의 정신을 - 어떻게 공유하고 운영하는지를 설명한다. 이것은 커널 개발에 입문하는 + 이 문서는 리눅스 커널 메인테이너들이 그들의 방법론에 녹아 있는 + 정신을 어떻게 공유하고 운영하는지를 설명한다. 이것은 커널 개발에 입문하는 모든 사람들(또는 커널 개발에 작은 호기심이라도 있는 사람들)이 - 읽어야 할 중요한 문서이다. 왜냐하면 이 문서는 커널 메인트너들의 + 읽어야 할 중요한 문서이다. 왜냐하면 이 문서는 커널 메인테이너들의 독특한 행동에 관하여 흔히 있는 오해들과 혼란들을 해소하고 있기 때문이다. @@ -160,7 +161,7 @@ mtk.manpages@gmail.com의 메인트너에게 보낼 것을 권장한다. Documentation/applying-patches.txt 패치가 무엇이며 그것을 커널의 다른 개발 브랜치들에 어떻게 - 적용하는지에 관하여 자세히 설명 하고 있는 좋은 입문서이다. + 적용하는지에 관하여 자세히 설명하고 있는 좋은 입문서이다. 커널은 소스 코드 그 자체에서 자동적으로 만들어질 수 있는 많은 문서들을 가지고 있다. 이것은 커널 내의 API에 대한 모든 설명, 그리고 락킹을 @@ -192,7 +193,7 @@ Documentation/DocBook/ 디렉토리 내에서 만들어지며 PDF, Postscript, H 여러분이 어디서 시작해야 할진 모르지만 커널 개발 커뮤니티에 참여할 수 있는 일들을 찾길 원한다면 리눅스 커널 Janitor 프로젝트를 살펴봐라. http://janitor.kernelnewbies.org/ -그곳은 시작하기에 아주 딱 좋은 곳이다. 그곳은 리눅스 커널 소스 트리내에 +그곳은 시작하기에 훌륭한 장소이다. 그곳은 리눅스 커널 소스 트리내에 간단히 정리되고 수정될 수 있는 문제들에 관하여 설명한다. 여러분은 이 프로젝트를 대표하는 개발자들과 일하면서 자신의 패치를 리눅스 커널 트리에 반영하기 위한 기본적인 것들을 배우게 될것이며 여러분이 아직 아이디어를 @@ -233,44 +234,45 @@ Documentation/DocBook/ 디렉토리 내에서 만들어지며 PDF, Postscript, H 2.6.x 커널들은 Linux Torvalds가 관리하며 kernel.org의 pub/linux/kernel/v2.6/ 디렉토리에서 참조될 수 있다.개발 프로세스는 다음과 같다. - 새로운 커널이 배포되자마자 2주의 시간이 주어진다. 이 기간동은 - 메인트너들은 큰 diff들을 Linus에게 제출할 수 있다. 대개 이 패치들은 + 메인테이너들은 큰 diff들을 Linus에게 제출할 수 있다. 대개 이 패치들은 몇 주 동안 -mm 커널내에 이미 있었던 것들이다. 큰 변경들을 제출하는 데 선호되는 방법은 git(커널의 소스 관리 툴, 더 많은 정보들은 http://git.or.cz/ - 에서 참조할 수 있다)를 사용하는 것이지만 순수한 패치파일의 형식으로 보내도 + 에서 참조할 수 있다)를 사용하는 것이지만 순수한 패치파일의 형식으로 보내는 것도 무관하다. - 2주 후에 -rc1 커널이 배포되며 지금부터는 전체 커널의 안정성에 영향을 - 미칠수 있는 새로운 기능들을 포함하지 않는 패치들만을 추가될 수 있다. + 미칠수 있는 새로운 기능들을 포함하지 않는 패치들만이 추가될 수 있다. 완전히 새로운 드라이버(혹은 파일시스템)는 -rc1 이후에만 받아들여진다는 것을 기억해라. 왜냐하면 변경이 자체내에서만 발생하고 추가된 코드가 드라이버 외부의 다른 부분에는 영향을 주지 않으므로 그런 변경은 - 퇴보(regression)를 일으킬 만한 위험을 가지고 있지 않기 때문이다. -rc1이 + 회귀(역자주: 이전에는 존재하지 않았지만 새로운 기능추가나 변경으로 인해 + 생겨난 버그)를 일으킬 만한 위험을 가지고 있지 않기 때문이다. -rc1이 배포된 이후에 git를 사용하여 패치들을 Linus에게 보낼수 있지만 패치들은 공식적인 메일링 리스트로 보내서 검토를 받을 필요가 있다. - - 새로운 -rc는 Linus는 현재 git tree가 테스트 하기에 충분히 안정된 상태에 + - 새로운 -rc는 Linus가 현재 git tree가 테스트 하기에 충분히 안정된 상태에 있다고 판단될 때마다 배포된다. 목표는 새로운 -rc 커널을 매주 배포하는 것이다. - - 이러한 프로세스는 커널이 "준비"되었다고 여겨질때까지 계속된다. + - 이러한 프로세스는 커널이 "준비(ready)"되었다고 여겨질때까지 계속된다. 프로세스는 대체로 6주간 지속된다. - - 각 -rc 배포에 있는 알려진 퇴보의 목록들은 다음 URI에 남겨진다. + - 각 -rc 배포에 있는 알려진 회귀의 목록들은 다음 URI에 남겨진다. http://kernelnewbies.org/known_regressions 커널 배포에 있어서 언급할만한 가치가 있는 리눅스 커널 메일링 리스트의 Andrew Morton의 글이 있다. - "커널이 언제 배포될지는 아무로 모른다. 왜냐하면 배포는 알려진 + "커널이 언제 배포될지는 아무도 모른다. 왜냐하면 배포는 알려진 버그의 상황에 따라 배포되는 것이지 미리정해 놓은 시간에 따라 - 배포되는 것은 아니기 때문이다." + 배포되는 것은 아니기 때문이다." 2.6.x.y - 안정 커널 트리 ------------------------ 4 자리 숫자로 이루어진 버젼의 커널들은 -stable 커널들이다. 그것들은 2.6.x -커널에서 발견된 큰 퇴보들이나 보안 문제들 중 비교적 작고 중요한 수정들을 +커널에서 발견된 큰 회귀들이나 보안 문제들 중 비교적 작고 중요한 수정들을 포함한다. 이것은 가장 최근의 안정적인 커널을 원하는 사용자에게 추천되는 브랜치이며, -개발/실험적 버젼을 테스트하는 것을 돕는데는 별로 관심이 없다. +개발/실험적 버젼을 테스트하는 것을 돕고자 하는 사용자들과는 별로 관련이 없다. -어떤 2.6.x.y 커널도 사용가능하지 않다면 그때는 가장 높은 숫자의 2.6.x +어떤 2.6.x.y 커널도 사용할 수 없다면 그때는 가장 높은 숫자의 2.6.x 커널이 현재의 안정 커널이다. 2.6.x.y는 "stable" 팀에 의해 관리되며 거의 매번 격주로 @@ -294,7 +296,7 @@ Andrew Morton에 의해 배포된 실험적인 커널 패치들이다. Andrew는 서브시스템 커널 트리와 패치들을 가져와서 리눅스 커널 메일링 리스트로 온 많은 패치들과 한데 묶는다. 이 트리는 새로운 기능들과 패치들을 위한 장소를 제공하는 역할을 한다. 하나의 패치가 -mm에 한동안 있으면서 그 가치가 -증명되게 되면 Andrew나 서브시스템 메인트너는 그것을 메인라인에 포함시키기 +증명되게 되면 Andrew나 서브시스템 메인테이너는 그것을 메인라인에 포함시키기 위하여 Linus에게 보낸다. 커널 트리에 포함하고 싶은 모든 새로운 패치들은 Linus에게 보내지기 전에 @@ -367,8 +369,8 @@ bugzilla.kernel.org는 리눅스 커널 개발자들이 커널의 버그를 추 kernel bugzilla를 사용하는 자세한 방법은 다음을 참조하라. http://test.kernel.org/bugzilla/faq.html -메인 커널 소스 디렉토리에 있는 REPORTING-BUGS 파일은 커널 버그일 것 같은 -것을 보고하는는 법에 관한 좋은 템플릿이고 문제를 추적하기 위해서 커널 +메인 커널 소스 디렉토리에 있는 REPORTING-BUGS 파일은 커널 버그라고 생각되는 +것을 보고하는 방법에 관한 좋은 템플릿이며 문제를 추적하기 위해서 커널 개발자들이 필요로 하는 정보가 무엇들인지를 상세히 설명하고 있다. @@ -383,7 +385,7 @@ kernel bugzilla를 사용하는 자세한 방법은 다음을 참조하라. 점수를 얻을 수 있는 가장 좋은 방법중의 하나이다. 왜냐하면 많은 사람들은 다른 사람들의 버그들을 수정하기 위하여 시간을 낭비하지 않기 때문이다. -이미 보고된 버그 리포트들을 가지고 작업하기 위해서 http://bugzilla.kernelorg를 +이미 보고된 버그 리포트들을 가지고 작업하기 위해서 http://bugzilla.kernel.org를 참조하라. 여러분이 앞으로 생겨날 버그 리포트들의 조언자가 되길 원한다면 bugme-new 메일링 리스트나(새로운 버그 리포트들만이 이곳에서 메일로 전해진다) bugme-janitor 메일링 리스트(bugzilla에 모든 변화들이 여기서 메일로 전해진다) @@ -404,8 +406,8 @@ bugme-janitor 메일링 리스트(bugzilla에 모든 변화들이 여기서 메 웹상의 많은 다른 곳에도 메일링 리스트의 아카이브들이 있다. 이러한 아카이브들을 찾으려면 검색 엔진을 사용하라. 예를 들어: http://dir.gmane.org/gmane.linux.kernel -여러분이 새로운 문제에 관해 리스트에 올리기 전에 말하고 싶은 주제에 대한 -것을 아카이브에서 먼저 찾기를 강력히 권장한다. 이미 상세하게 토론된 많은 +여러분이 새로운 문제에 관해 리스트에 올리기 전에 말하고 싶은 주제에 관한 +것을 아카이브에서 먼저 찾아보기를 강력히 권장한다. 이미 상세하게 토론된 많은 것들이 메일링 리스트의 아카이브에 기록되어 있다. 각각의 커널 서브시스템들의 대부분은 자신들의 개발에 관한 노력들로 이루어진 @@ -443,7 +445,7 @@ bugme-janitor 메일링 리스트(bugzilla에 모든 변화들이 여기서 메 무엇보다도 메일링 리스트의 다른 구독자들에게 보여주려 한다는 것을 기억하라. -커뮤니티와 일하는 법 +커뮤니티와 협력하는 법 -------------------- 커널 커뮤니티의 목적은 가능한한 가장 좋은 커널을 제공하는 것이다. 여러분이 @@ -474,7 +476,7 @@ bugme-janitor 메일링 리스트(bugzilla에 모든 변화들이 여기서 메 올바른 방향의 해결책으로 이끌어갈 의지가 있다면 받아들여질 것이라는 점을 기억하라. -여러분의 첫 패치에 여러분이 수정해야하는 십여개 정도의 회신이 오는 +여러분의 첫 패치에 여러분이 수정해야하는 십여개 정도의 회신이 오는 경우도 흔하다. 이것은 여러분의 패치가 받아들여지지 않을 것이라는 것을 의미하는 것이 아니고 개인적으로 여러분에게 감정이 있어서 그러는 것도 아니다. 간단히 여러분의 패치에 제기된 문제들을 수정하고 그것을 다시 @@ -486,12 +488,12 @@ bugme-janitor 메일링 리스트(bugzilla에 모든 변화들이 여기서 메 커널 커뮤니티는 가장 전통적인 회사의 개발 환경과는 다르다. 여기에 여러분들의 문제를 피하기 위한 목록이 있다. 여러분들이 제안한 변경들에 관하여 말할 때 좋은 것들 : - - " 이것은 여러 문제들을 해겹합니다." + - "이것은 여러 문제들을 해겹합니다." - "이것은 2000 라인의 코드를 제거합니다." - "이것은 내가 말하려는 것에 관해 설명하는 패치입니다." - "나는 5개의 다른 아키텍쳐에서 그것을 테스트했슴으로..." - - "여기에 일련의 작은 패치들이 있습음로..." - - "이것은 일반적인 머신에서 성능을 향상시키므로..." + - "여기에 일련의 작은 패치들이 있슴음로..." + - "이것은 일반적인 머신에서 성능을 향상시킴으로..." 여러분들이 말할 때 피해야 할 좋지 않은 것들 : - "우리를 그것을 AIT/ptx/Solaris에서 이러한 방법으로 했다. 그러므로 그것은 좋은 것임에 틀립없다..." @@ -500,7 +502,7 @@ bugme-janitor 메일링 리스트(bugzilla에 모든 변화들이 여기서 메 - "이것은 우리의 엔터프라이즈 상품 라인을 위한 것이다." - "여기에 나의 생각을 말하고 있는 1000 페이지 설계 문서가 있다." - "나는 6달동안 이것을 했으니..." - - "여기세 5000라인 짜리 패치가 있으니..." + - "여기에 5000라인 짜리 패치가 있으니..." - "나는 현재 뒤죽박죽인 것을 재작성했다. 그리고 여기에..." - "나는 마감시한을 가지고 있으므로 이 패치는 지금 적용될 필요가 있다." @@ -510,13 +512,13 @@ bugme-janitor 메일링 리스트(bugzilla에 모든 변화들이 여기서 메 없다는 것이다. 리눅스 커널의 작업 환경에서는 단지 이메일 주소만 알수 있기 때문에 여성과 소수 민족들도 모두 받아들여진다. 국제적으로 일하게 되는 측면은 사람의 이름에 근거하여 성별을 추측할 수 없게 -하기때문에 차별을 없애는 데 도움을 준다. Andrea라는 이름을 가진 남자와 +하기때문에 차별을 없애는 데 도움을 준다. Andrea라는 이름을 가진 남자와 Pat이라는 이름을 가진 여자가 있을 수도 있는 것이다. 리눅스 커널에서 작업하며 생각을 표현해왔던 대부분의 여성들은 긍정적인 경험을 가지고 있다. 언어 장벽은 영어에 익숙하지 않은 몇몇 사람들에게 문제가 될 수도 있다. - 언어의 훌륭한 구사는 메일링 리스트에서 올바르게 자신의 생각을 +언어의 훌륭한 구사는 메일링 리스트에서 올바르게 자신의 생각을 표현하기 위하여 필요하다. 그래서 여러분은 이메일을 보내기 전에 영어를 올바르게 사용하고 있는지를 체크하는 것이 바람직하다. @@ -524,13 +526,13 @@ Pat이라는 이름을 가진 여자가 있을 수도 있는 것이다. 리눅 여러분의 변경을 나누어라 ------------------------ -리눅스 커널 커뮤니티는 한꺼번에 굉장히 큰 코드의 묶음을 쉽게 +리눅스 커널 커뮤니티는 한꺼번에 굉장히 큰 코드의 묶음(chunk)을 쉽게 받아들이지 않는다. 변경은 적절하게 소개되고, 검토되고, 각각의 부분으로 작게 나누어져야 한다. 이것은 회사에서 하는 것과는 정확히 반대되는 것이다. 여러분들의 제안은 개발 초기에 일찍이 소개되야 한다. 그래서 여러분들은 자신이 하고 있는 것에 관하여 피드백을 받을 수 있게 된다. 커뮤니티가 여러분들이 커뮤니티와 함께 일하고 있다는 것을 -느끼도록 만들고 커뮤니티가 여러분의 기능을 위한 쓰레기 장으로서 +느끼도록 만들고 커뮤니티가 여러분의 기능을 위한 쓰레기 장으로써 사용되지 않고 있다는 것을 느끼게 하자. 그러나 메일링 리스트에 한번에 50개의 이메일을 보내지는 말아라. 여러분들의 일련의 패치들은 항상 더 작아야 한다. @@ -539,7 +541,7 @@ Pat이라는 이름을 가진 여자가 있을 수도 있는 것이다. 리눅 1) 작은 패치들은 여러분의 패치들이 적용될 수 있는 확률을 높여준다. 왜냐하면 다른 사람들은 정확성을 검증하기 위하여 많은 시간과 노력을 - 들이기를 원하지 않는다. 5줄의 패치는 메인트너가 거의 몇 초간 힐끗 + 들이기를 원하지 않는다. 5줄의 패치는 메인테이너가 거의 몇 초간 힐끗 보면 적용될 수 있다. 그러나 500 줄의 패치는 정확성을 검토하기 위하여 몇시간이 걸릴 수도 있다(걸리는 시간은 패치의 크기 혹은 다른 것에 비례하여 기하급수적으로 늘어난다). @@ -558,18 +560,18 @@ Pat이라는 이름을 가진 여자가 있을 수도 있는 것이다. 리눅 간결하고 가장 뛰어난 답을 보길 원한다. 훌륭한 학생은 이것을 알고 마지막으로 답을 얻기 전 중간 과정들을 제출하진 않는다. - 커널 개발도 마찬가지이다. 메인트너들과 검토하는 사람들은 문제를 + 커널 개발도 마찬가지이다. 메인테이너들과 검토하는 사람들은 문제를 풀어나가는 과정속에 숨겨진 과정을 보길 원하진 않는다. 그들은 간결하고 멋진 답을 보길 원한다." -커뮤니티와 함께 일하며 뛰어난 답을 찾고 여러분들의 완성되지 않은 일들 -사이에 균형을 유지해야 하는 어려움이 있을 수 있다. 그러므로 프로세스의 -초반에 여러분의 일을 향상시키기위한 피드백을 얻는 것 뿐만 아니라 +커뮤니티와 협력하며 뛰어난 답을 찾는 것과 여러분들의 끝마치지 못한 작업들 +사이에 균형을 유지해야 하는 것은 어려울지도 모른다. 그러므로 프로세스의 +초반에 여러분의 작업을 향상시키기위한 피드백을 얻는 것 뿐만 아니라 여러분들의 변경들을 작은 묶음으로 유지해서 심지어는 여러분의 작업의 -모든 부분이 지금은 포함될 준비가 되어있지 않지만 작은 부분은 이미 +모든 부분이 지금은 포함될 준비가 되어있지 않지만 작은 부분은 벌써 받아들여질 수 있도록 유지하는 것이 바람직하다. -또한 완성되지 않았고 "나중에 수정될 것이다." 와 같은 것들은 포함하는 +또한 완성되지 않았고 "나중에 수정될 것이다." 와 같은 것들을 포함하는 패치들은 받아들여지지 않을 것이라는 점을 유념하라. 변경을 정당화해라 @@ -577,7 +579,7 @@ Pat이라는 이름을 가진 여자가 있을 수도 있는 것이다. 리눅 여러분들의 나누어진 패치들을 리눅스 커뮤니티가 왜 반영해야 하는지를 알도록 하는 것은 매우 중요하다. 새로운 기능들이 필요하고 유용하다는 -것은 반드시 그에 맞는 이유가 있어야 한다. +것은 반드시 그에 합당한 이유가 있어야 한다. 변경을 문서화해라 @@ -588,7 +590,7 @@ Pat이라는 이름을 가진 여자가 있을 수도 있는 것이다. 리눅 것이다. 그리고 항상 그 내용을 보길 원하는 모든 사람들을 위해 보존될 것이다. 패치는 완벽하게 다음과 같은 내용들을 포함하여 설명해야 한다. - 변경이 왜 필요한지 - - 패치에 관한 전체 설계 어프로치 + - 패치에 관한 전체 설계 접근(approach) - 구현 상세들 - 테스트 결과들 @@ -600,7 +602,7 @@ Pat이라는 이름을 가진 여자가 있을 수도 있는 것이다. 리눅 이 모든 것을 하는 것은 매우 어려운 일이다. 완벽히 소화하는 데는 적어도 몇년이 -걸릴 수도 있다. 많은 인내와 결의가 필요한 계속되는 개선의 과정이다. 그러나 +걸릴 수도 있다. 많은 인내와 결심이 필요한 계속되는 개선의 과정이다. 그러나 가능한한 포기하지 말라. 많은 사람들은 이전부터 해왔던 것이고 그 사람들도 정확하게 여러분들이 지금 서 있는 그 곳부터 시작했었다. @@ -620,4 +622,4 @@ David A. Wheeler, Junio Hamano, Michael Kerrisk, and Alex Shepard에게도 감 -메인트너: Greg Kroah-Hartman +메인테이너: Greg Kroah-Hartman -- cgit v1.2.3-59-g8ed1b From bb44609361fe87c5e136c2b8dfde59bcbdbabf61 Mon Sep 17 00:00:00 2001 From: Gary Hade Date: Tue, 11 Dec 2007 17:09:13 -0800 Subject: PCI: Restore PCI expansion ROM P2P prefetch window creation Restore PCI expansion ROM P2P prefetch window creation. This patch reverts previous "Avoid creating P2P prefetch window for expansion ROMs" change due to regressions that were spotted on some systems. Signed-off-by: Gary Hade Signed-off-by: Greg Kroah-Hartman --- drivers/pci/probe.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index c2f8a78c894c..2f75d695eed7 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -276,7 +276,8 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom) sz = pci_size(l, sz, (u32)PCI_ROM_ADDRESS_MASK); if (sz) { res->flags = (l & IORESOURCE_ROM_ENABLE) | - IORESOURCE_MEM | IORESOURCE_READONLY; + IORESOURCE_MEM | IORESOURCE_PREFETCH | + IORESOURCE_READONLY | IORESOURCE_CACHEABLE; res->start = l & PCI_ROM_ADDRESS_MASK; res->end = res->start + (unsigned long) sz; } -- cgit v1.2.3-59-g8ed1b From b9e13ac30f850313be9232497ff98e90c43bc6b6 Mon Sep 17 00:00:00 2001 From: "agilmore@wirelessbeehive.com" Date: Tue, 4 Dec 2007 11:37:12 -0700 Subject: USB: sierra: fix product id Attached is a patch to fix the addition of the new product ids I sent. It is against 2.6.24-rc4, as Linus included the broken version of the patch I sent you in that tree. :( Not sure if this is the right method to go about this, but hopefully I got it right this time. Signed-off-by: Andrew Gilmore CC: Kevin Lloyd Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 605ebccdcd51..e5c274044a5f 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -100,6 +100,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */ { USB_DEVICE(0x0f30, 0x1b1d) }, /* Sierra Wireless MC5720 */ { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */ + { USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */ { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */ { USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */ { USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U */ @@ -137,7 +138,6 @@ static struct usb_device_id id_table_3port [] = { { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */ { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */ { USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */ - { USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */ { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */ { USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */ { USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U*/ -- cgit v1.2.3-59-g8ed1b From 33abc04f0420dceed0ebc2d1094019d3bb2b5c29 Mon Sep 17 00:00:00 2001 From: Doug Maxey Date: Wed, 5 Dec 2007 23:36:45 -0600 Subject: usb-storage: Fix devices that cannot handle 32k transfers When a device cannot handle the smallest previously limited transfer size (64 blocks) without stalling, limit the device to the amount of packets that fit in a platform native page. The lowest possible limit is PAGE_CACHE_SIZE, so if the device is ever used on a platform that has larger than 8K pages, you lose unless you can convince the device firmware folks to fix the issue. Cc: Mathew Dharm Cc: Alan Stern Cc: Pete Zaitcev Signed-off-by: Doug Maxey Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/scsiglue.c | 12 +++++++++--- drivers/usb/storage/unusual_devs.h | 7 +++++++ include/linux/usb_usual.h | 5 ++++- 3 files changed, 20 insertions(+), 4 deletions(-) diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 836a34ae6ec6..7c9593b7b04e 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -114,9 +114,15 @@ static int slave_configure(struct scsi_device *sdev) * while others have trouble with more than 64K. At this time we * are limiting both to 32K (64 sectores). */ - if ((us->flags & US_FL_MAX_SECTORS_64) && - sdev->request_queue->max_sectors > 64) - blk_queue_max_sectors(sdev->request_queue, 64); + if (us->flags & (US_FL_MAX_SECTORS_64 | US_FL_MAX_SECTORS_MIN)) { + unsigned int max_sectors = 64; + + if (us->flags & US_FL_MAX_SECTORS_MIN) + max_sectors = PAGE_CACHE_SIZE >> 9; + if (sdev->request_queue->max_sectors > max_sectors) + blk_queue_max_sectors(sdev->request_queue, + max_sectors); + } /* We can't put these settings in slave_alloc() because that gets * called before the device type is known. Consequently these diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 2c27721bd259..7bbfd31a9645 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -376,6 +376,13 @@ UNUSUAL_DEV( 0x04b0, 0x0417, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), +/* Reported by Doug Maxey (dwm@austin.ibm.com) */ +UNUSUAL_DEV( 0x04b3, 0x4001, 0x0110, 0x0110, + "IBM", + "IBM RSA2", + US_SC_DEVICE, US_PR_CB, NULL, + US_FL_MAX_SECTORS_MIN), + /* BENQ DC5330 * Reported by Manuel Fombuena and * Frank Copeland */ diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h index 1b792b9286ba..a417b09b8b3d 100644 --- a/include/linux/usb_usual.h +++ b/include/linux/usb_usual.h @@ -48,7 +48,10 @@ US_FLAG(IGNORE_DEVICE, 0x00000800) \ /* Don't claim device */ \ US_FLAG(CAPACITY_HEURISTICS, 0x00001000) \ - /* sometimes sizes is too big */ + /* sometimes sizes is too big */ \ + US_FLAG(MAX_SECTORS_MIN,0x00002000) \ + /* Sets max_sectors to arch min */ + #define US_FLAG(name, value) US_FL_##name = value , enum { US_DO_ALL_FLAGS }; -- cgit v1.2.3-59-g8ed1b From 8be27c2de64e95c3da12a4b002f623570b039874 Mon Sep 17 00:00:00 2001 From: Jeff Long Date: Wed, 28 Nov 2007 11:02:09 -0500 Subject: USB: cp2101: new device id This adds a device ID for the Aerocomm Radio Modem, which uses the cp2102. I'm sure changing num_bulk_in/num_bulk_out to NUM_DONT_CARE is the wrong fix, but this is the only device I have with a cp2102, so I have no idea what a good global value would be, if there is one. Zero didn't work with this device. From: Jeff Long Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp2101.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 3a83cb4c4bc2..da16b5157816 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -71,6 +71,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */ { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */ { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */ + { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */ { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ @@ -98,8 +99,8 @@ static struct usb_serial_driver cp2101_device = { .usb_driver = &cp2101_driver, .id_table = id_table, .num_interrupt_in = 0, - .num_bulk_in = 0, - .num_bulk_out = 0, + .num_bulk_in = NUM_DONT_CARE, + .num_bulk_out = NUM_DONT_CARE, .num_ports = 1, .open = cp2101_open, .close = cp2101_close, -- cgit v1.2.3-59-g8ed1b From b5ce18afecda8ce1a9ed5fb8ec6362df6f6f85b8 Mon Sep 17 00:00:00 2001 From: Jaime Velasco Juan Date: Fri, 30 Nov 2007 16:30:11 +0000 Subject: USB: option: Bind to the correct interface of the Huawei E220 This fixes a bunch of problems we are having with the Huawei devices... Signed-off-by: Oliver Neukum Signed-off-by: Jaime Velasco Juan Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 4590124cf888..d1185f53447b 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -158,8 +158,8 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_NETWORK) }, { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1100) }, /* Novatel Merlin XS620/S640 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1110) }, /* Novatel Merlin S620 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1120) }, /* Novatel Merlin EX720 */ -- cgit v1.2.3-59-g8ed1b From f88ed90d8627d0d3d93b330d6d2012c2934fb54e Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 3 Dec 2007 14:14:16 -0800 Subject: usb.h: fix kernel-doc warning Fix kernel-doc warning in usb.h: Warning(linux-2.6.24-rc3-git7//include/linux/usb.h:166): No description found for parameter 'sysfs_files_created' Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/usb.h b/include/linux/usb.h index 416ee7617d9e..5fc8ff73b7bb 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -107,6 +107,7 @@ enum usb_interface_condition { * @condition: binding state of the interface: not bound, binding * (in probe()), bound to a driver, or unbinding (in disconnect()) * @is_active: flag set when the interface is bound and not suspended. + * @sysfs_files_created: sysfs attributes exist * @needs_remote_wakeup: flag set when the driver requires remote-wakeup * capability during autosuspend. * @dev: driver model's view of this device -- cgit v1.2.3-59-g8ed1b From d48bd977e0dd8c17081d12242bfc09d743ea0d26 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 11 Dec 2007 16:02:23 -0500 Subject: USB: fix locking loop by avoiding flush_scheduled_work This patch (as1027) replaces a call to flush_scheduled_work() -- a dangerous routine to invoke, especially while holding any sort of lock -- with calls to cancel_work_sync() and cancel_delayed_work_sync(). This fixes Bugzilla #9532. Signed-off-by: Alan Stern CC: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 13b326a13377..b04d232d4c65 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -522,9 +522,9 @@ static void hub_quiesce(struct usb_hub *hub) /* (blocking) stop khubd and related activity */ usb_kill_urb(hub->urb); if (hub->has_indicators) - cancel_delayed_work(&hub->leds); - if (hub->has_indicators || hub->tt.hub) - flush_scheduled_work(); + cancel_delayed_work_sync(&hub->leds); + if (hub->tt.hub) + cancel_work_sync(&hub->tt.kevent); } static void hub_activate(struct usb_hub *hub) -- cgit v1.2.3-59-g8ed1b From 442258e2ff69276ff767f3703b30ce6a31fdd181 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 6 Dec 2007 14:47:08 -0500 Subject: USB: use IRQF_DISABLED for HCD interrupt handlers Host controller IRQs are supposed to be serviced with interrupts disabled. This patch (as1026) adds an IRQF_DISABLED flag to all the controller drivers that lack it. It also replaces the spin_lock_irqsave() and spin_unlock_irqrestore() calls in uhci_irq() with simple spin_lock() and spin_unlock(). This fixes Bugzilla #9335. Signed-off-by: Alan Stern Acked-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd-pci.c | 2 +- drivers/usb/host/ehci-fsl.c | 2 +- drivers/usb/host/ohci-ppc-of.c | 2 +- drivers/usb/host/ohci-ssb.c | 2 +- drivers/usb/host/r8a66597-hcd.c | 2 +- drivers/usb/host/uhci-hcd.c | 9 ++++----- 6 files changed, 9 insertions(+), 10 deletions(-) diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 5cf6d5f9acbd..3fb9af80cbf4 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -125,7 +125,7 @@ int usb_hcd_pci_probe (struct pci_dev *dev, const struct pci_device_id *id) pci_set_master (dev); - retval = usb_add_hcd (hcd, dev->irq, IRQF_SHARED); + retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED); if (retval != 0) goto err4; return retval; diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index b7b7bfbce527..430821cb95c8 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -122,7 +122,7 @@ int usb_hcd_fsl_probe(const struct hc_driver *driver, temp = in_le32(hcd->regs + 0x1a8); out_le32(hcd->regs + 0x1a8, temp | 0x3); - retval = usb_add_hcd(hcd, irq, IRQF_SHARED); + retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); if (retval != 0) goto err4; return retval; diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c index 0a7426920150..0c3e6b790b7b 100644 --- a/drivers/usb/host/ohci-ppc-of.c +++ b/drivers/usb/host/ohci-ppc-of.c @@ -142,7 +142,7 @@ ohci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match) ohci_hcd_init(ohci); - rv = usb_add_hcd(hcd, irq, 0); + rv = usb_add_hcd(hcd, irq, IRQF_DISABLED); if (rv == 0) return 0; diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c index fe70e72340de..6e9c2d6db887 100644 --- a/drivers/usb/host/ohci-ssb.c +++ b/drivers/usb/host/ohci-ssb.c @@ -160,7 +160,7 @@ static int ssb_ohci_attach(struct ssb_device *dev) hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); if (!hcd->regs) goto err_put_hcd; - err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED); + err = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED); if (err) goto err_iounmap; diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index ae8ec4474eb8..0ce2fc5e396b 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -2197,7 +2197,7 @@ static int __init r8a66597_probe(struct platform_device *pdev) INIT_LIST_HEAD(&r8a66597->child_device); hcd->rsrc_start = res->start; - ret = usb_add_hcd(hcd, irq, 0); + ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); if (ret != 0) { err("Failed to add hcd"); goto clean_up; diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 4db17f75f4f1..ec987897b8ed 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -378,7 +378,6 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd) { struct uhci_hcd *uhci = hcd_to_uhci(hcd); unsigned short status; - unsigned long flags; /* * Read the interrupt status, and write it back to clear the @@ -398,7 +397,7 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd) dev_err(uhci_dev(uhci), "host controller process " "error, something bad happened!\n"); if (status & USBSTS_HCH) { - spin_lock_irqsave(&uhci->lock, flags); + spin_lock(&uhci->lock); if (uhci->rh_state >= UHCI_RH_RUNNING) { dev_err(uhci_dev(uhci), "host controller halted, " @@ -415,16 +414,16 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd) * pending unlinks */ mod_timer(&hcd->rh_timer, jiffies); } - spin_unlock_irqrestore(&uhci->lock, flags); + spin_unlock(&uhci->lock); } } if (status & USBSTS_RD) usb_hcd_poll_rh_status(hcd); else { - spin_lock_irqsave(&uhci->lock, flags); + spin_lock(&uhci->lock); uhci_scan_schedule(uhci); - spin_unlock_irqrestore(&uhci->lock, flags); + spin_unlock(&uhci->lock); } return IRQ_HANDLED; -- cgit v1.2.3-59-g8ed1b From 08cbc706acd2dd601b0663e28fa97ffb0564e105 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Thu, 13 Dec 2007 15:52:58 -0800 Subject: USB: at91_udc: correct hanging while disconnecting usb cable Correct hanging while disconnecting the USB device cable. Prevent a race between vbus and UDP interrupts. This bug was tracked on at91sam9260ek boards. A usb resume interrupt was firing after the vbus interrupt : the IP was then already stoped and not able to deal with it (no more clock). A simple interrupt disabling is ok as the "end of bus reset" irq is non maskable and ok to resume the USB device IP. Signed-off-by: Nicolas Ferre Acked-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/at91_udc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index a6adf7e0f6f8..cd62b029d176 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -887,6 +887,7 @@ static void pullup(struct at91_udc *udc, int is_on) if (is_on) { clk_on(udc); + at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXRSM); at91_udp_write(udc, AT91_UDP_TXVC, 0); if (cpu_is_at91rm9200()) at91_set_gpio_value(udc->board.pullup_pin, 1); @@ -904,6 +905,7 @@ static void pullup(struct at91_udc *udc, int is_on) } } else { stop_activity(udc); + at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXRSM); at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS); if (cpu_is_at91rm9200()) at91_set_gpio_value(udc->board.pullup_pin, 0); -- cgit v1.2.3-59-g8ed1b From 565227c08226e458da191518251dbff6831624c2 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 6 Dec 2007 13:28:25 -0800 Subject: usb: Remove broken optimisation in OHCI IRQ handler The OHCI IRQ handler has an optimisation that avoids reading some chip registers when the controller reports that the interrupt was triggered *only* because completed requests were written into the controller's "done list" and handed to the host. This mechanism can't be used on some controllers. Among others, it fails for the SA1111 and the AMCC 440EP PowerPC processor. This patch removes the optimisation and makes the code clearer. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-hcd.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 704f33fdd2f1..ecfe800fd720 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -732,24 +732,27 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd) struct ohci_regs __iomem *regs = ohci->regs; int ints; - /* we can eliminate a (slow) ohci_readl() - * if _only_ WDH caused this irq + /* Read interrupt status (and flush pending writes). We ignore the + * optimization of checking the LSB of hcca->done_head; it doesn't + * work on all systems (edge triggering for OHCI can be a factor). */ - if ((ohci->hcca->done_head != 0) - && ! (hc32_to_cpup (ohci, &ohci->hcca->done_head) - & 0x01)) { - ints = OHCI_INTR_WDH; + ints = ohci_readl(ohci, ®s->intrstatus); - /* cardbus/... hardware gone before remove() */ - } else if ((ints = ohci_readl (ohci, ®s->intrstatus)) == ~(u32)0) { + /* Check for an all 1's result which is a typical consequence + * of dead, unclocked, or unplugged (CardBus...) devices + */ + if (ints == ~(u32)0) { disable (ohci); ohci_dbg (ohci, "device removed!\n"); return IRQ_HANDLED; + } + + /* We only care about interrupts that are enabled */ + ints &= ohci_readl(ohci, ®s->intrenable); /* interrupt for some other device? */ - } else if ((ints &= ohci_readl (ohci, ®s->intrenable)) == 0) { + if (ints == 0) return IRQ_NOTMINE; - } if (ints & OHCI_INTR_UE) { // e.g. due to PCI Master/Target Abort -- cgit v1.2.3-59-g8ed1b From e70e7690b66dc06fe2ad9058e696e18fe7f3faa6 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 14 Dec 2007 19:18:31 -0500 Subject: USB: revert portions of "UNUSUAL_DEV: Sync up some reported devices from Ubuntu" This reverts one change from 67fa10627ec0d8aa16f1cf38cf527e67d8097d3c that prevented userspace from seing the "driver disk" lun in a san disk device. The kernel shouldn't do this, it's up to userspace to handle this properly, if it somehow wants to filter this away. Cc: Ben Collins Cc: Alan Stern Cc: Phil Dibowitz Cc: Kyle McMartin Cc: Matthew Dharm Cc: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 7bbfd31a9645..6d6108b3993b 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1265,14 +1265,6 @@ UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_DEVICE ), -/* SanDisk that has a second LUN for a driver ISO, reported by - * Ben Collins */ -UNUSUAL_DEV( 0x0781, 0x5406, 0x0000, 0xffff, - "SanDisk", - "U3 Cruzer Micro driver ISO", - US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_SINGLE_LUN ), - #ifdef CONFIG_USB_STORAGE_ISD200 UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110, "ATI", -- cgit v1.2.3-59-g8ed1b From a86370fbb65a0a2cb21d28bf25a748f6cc04385b Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Mon, 3 Dec 2007 14:06:23 -0800 Subject: ocfs2: fix exit-while-locked bug in ocfs2_queue_orphans() We're holding the cluster lock when a failure might happen in ocfs2_dir_foreach() so it needs to be released. Signed-off-by: Mark Fasheh --- fs/ocfs2/journal.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c index f9d01e25298d..7e5f7ce4761b 100644 --- a/fs/ocfs2/journal.c +++ b/fs/ocfs2/journal.c @@ -1277,11 +1277,12 @@ static int ocfs2_queue_orphans(struct ocfs2_super *osb, ocfs2_orphan_filldir); if (status) { mlog_errno(status); - goto out; + goto out_cluster; } *head = priv.head; +out_cluster: ocfs2_meta_unlock(orphan_dir_inode, 0); out: mutex_unlock(&orphan_dir_inode->i_mutex); -- cgit v1.2.3-59-g8ed1b From 92295d8054289eff0d52b4d12349f9b9df0f58e4 Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Mon, 3 Dec 2007 15:02:10 -0800 Subject: ocfs2: Don't panic when truncating an empty extent This BUG_ON() was unintentionally left in after the sparse file support was written. Signed-off-by: Mark Fasheh --- fs/ocfs2/alloc.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c index ce62c152823d..97f0db5167c4 100644 --- a/fs/ocfs2/alloc.c +++ b/fs/ocfs2/alloc.c @@ -6093,8 +6093,6 @@ start: mlog(0, "clusters_to_del = %u in this pass, tail blk=%llu\n", clusters_to_del, (unsigned long long)path_leaf_bh(path)->b_blocknr); - BUG_ON(clusters_to_del == 0); - mutex_lock(&tl_inode->i_mutex); tl_sem = 1; /* ocfs2_truncate_log_needs_flush guarantees us at least one -- cgit v1.2.3-59-g8ed1b From 0879c584ffcccd50a8d0f72cab3a51702613f901 Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Mon, 3 Dec 2007 16:42:19 -0800 Subject: ocfs2: Allow for debugging of transaction extends The nastiest cases of transaction extends are also the rarest. We can expose them more quickly at the expense of performance by going straight to the journal_restart() in ocfs2_extend_trans(). Wrap things in OCFS2_DEBUG_FS so that we only do this when "expensive debugging" is turned on. Signed-off-by: Mark Fasheh --- fs/ocfs2/journal.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c index 7e5f7ce4761b..0e1250c2ef44 100644 --- a/fs/ocfs2/journal.c +++ b/fs/ocfs2/journal.c @@ -193,11 +193,15 @@ int ocfs2_extend_trans(handle_t *handle, int nblocks) mlog(0, "Trying to extend transaction by %d blocks\n", nblocks); +#ifdef OCFS2_DEBUG_FS + status = 1; +#else status = journal_extend(handle, nblocks); if (status < 0) { mlog_errno(status); goto bail; } +#endif if (status > 0) { mlog(0, "journal_extend failed, trying journal_restart\n"); -- cgit v1.2.3-59-g8ed1b From e8aed3450c0afd6fdb79ec233f806e3e69454dfe Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Mon, 3 Dec 2007 16:43:01 -0800 Subject: ocfs2: Re-journal buffers after transaction extend ocfs2_extend_trans() might call journal_restart() which will commit dirty buffers and then restart the transaction. This means that any buffers which still need changes should be passed to journal_access() again. Some paths during extend weren't doing this right. Signed-off-by: Mark Fasheh --- fs/ocfs2/alloc.c | 66 +++++++++++++++++++++++++++++++++++++----------------- fs/ocfs2/journal.c | 6 +++++ 2 files changed, 51 insertions(+), 21 deletions(-) diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c index 97f0db5167c4..23c8cda43f19 100644 --- a/fs/ocfs2/alloc.c +++ b/fs/ocfs2/alloc.c @@ -2389,6 +2389,18 @@ static int __ocfs2_rotate_tree_left(struct inode *inode, goto out; } + /* + * Caller might still want to make changes to the + * tree root, so re-add it to the journal here. + */ + ret = ocfs2_journal_access(handle, inode, + path_root_bh(left_path), + OCFS2_JOURNAL_ACCESS_WRITE); + if (ret) { + mlog_errno(ret); + goto out; + } + ret = ocfs2_rotate_subtree_left(inode, handle, left_path, right_path, subtree_root, dealloc, &deleted); @@ -3289,16 +3301,6 @@ static int ocfs2_insert_path(struct inode *inode, int ret, subtree_index; struct buffer_head *leaf_bh = path_leaf_bh(right_path); - /* - * Pass both paths to the journal. The majority of inserts - * will be touching all components anyway. - */ - ret = ocfs2_journal_access_path(inode, handle, right_path); - if (ret < 0) { - mlog_errno(ret); - goto out; - } - if (left_path) { int credits = handle->h_buffer_credits; @@ -3323,6 +3325,16 @@ static int ocfs2_insert_path(struct inode *inode, } } + /* + * Pass both paths to the journal. The majority of inserts + * will be touching all components anyway. + */ + ret = ocfs2_journal_access_path(inode, handle, right_path); + if (ret < 0) { + mlog_errno(ret); + goto out; + } + if (insert->ins_split != SPLIT_NONE) { /* * We could call ocfs2_insert_at_leaf() for some types @@ -3331,6 +3343,17 @@ static int ocfs2_insert_path(struct inode *inode, */ ocfs2_split_record(inode, left_path, right_path, insert_rec, insert->ins_split); + + /* + * Split might have modified either leaf and we don't + * have a guarantee that the later edge insert will + * dirty this for us. + */ + if (left_path) + ret = ocfs2_journal_dirty(handle, + path_leaf_bh(left_path)); + if (ret) + mlog_errno(ret); } else ocfs2_insert_at_leaf(insert_rec, path_leaf_el(right_path), insert, inode); @@ -3430,6 +3453,17 @@ static int ocfs2_do_insert_extent(struct inode *inode, mlog_errno(ret); goto out; } + + /* + * ocfs2_rotate_tree_right() might have extended the + * transaction without re-journaling our tree root. + */ + ret = ocfs2_journal_access(handle, inode, di_bh, + OCFS2_JOURNAL_ACCESS_WRITE); + if (ret) { + mlog_errno(ret); + goto out; + } } else if (type->ins_appending == APPEND_TAIL && type->ins_contig != CONTIG_LEFT) { ret = ocfs2_append_rec_to_path(inode, handle, insert_rec, @@ -3941,7 +3975,7 @@ static int __ocfs2_mark_extent_written(struct inode *inode, { int ret = 0; struct ocfs2_extent_list *el = path_leaf_el(path); - struct buffer_head *eb_bh, *last_eb_bh = NULL; + struct buffer_head *last_eb_bh = NULL; struct ocfs2_extent_rec *rec = &el->l_recs[split_index]; struct ocfs2_merge_ctxt ctxt; struct ocfs2_extent_list *rightmost_el; @@ -3960,14 +3994,6 @@ static int __ocfs2_mark_extent_written(struct inode *inode, goto out; } - eb_bh = path_leaf_bh(path); - ret = ocfs2_journal_access(handle, inode, eb_bh, - OCFS2_JOURNAL_ACCESS_WRITE); - if (ret) { - mlog_errno(ret); - goto out; - } - ctxt.c_contig_type = ocfs2_figure_merge_contig_type(inode, el, split_index, split_rec); @@ -4029,8 +4055,6 @@ static int __ocfs2_mark_extent_written(struct inode *inode, mlog_errno(ret); } - ocfs2_journal_dirty(handle, eb_bh); - out: brelse(last_eb_bh); return ret; diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c index 0e1250c2ef44..8d81f6c1b877 100644 --- a/fs/ocfs2/journal.c +++ b/fs/ocfs2/journal.c @@ -174,6 +174,12 @@ int ocfs2_commit_trans(struct ocfs2_super *osb, * transaction. extend_trans will either extend the current handle by * nblocks, or commit it and start a new one with nblocks credits. * + * This might call journal_restart() which will commit dirty buffers + * and then restart the transaction. Before calling + * ocfs2_extend_trans(), any changed blocks should have been + * dirtied. After calling it, all blocks which need to be changed must + * go through another set of journal_access/journal_dirty calls. + * * WARNING: This will not release any semaphores or disk locks taken * during the transaction, so make sure they were taken *before* * start_trans or we'll have ordering deadlocks. -- cgit v1.2.3-59-g8ed1b From 7a1fd330571530d44261bf8e9ee63b880f2bb4db Mon Sep 17 00:00:00 2001 From: Komuro Date: Mon, 17 Dec 2007 22:22:31 +0900 Subject: pcnet_cs: add new id add new id: Planex CF-10T Signed-off-by: Komuro Signed-off-by: Jeff Garzik --- drivers/net/pcmcia/pcnet_cs.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index db6a97d1d7b1..51bbd582f16c 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -1746,6 +1746,7 @@ static struct pcmcia_device_id pcnet_ids[] = { PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "NE2K.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "PE-200.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "tamarack.cis"), + PCMCIA_DEVICE_PROD_ID12("Ethernet", "CF Size PC Card", 0x00b2e941, 0x43ac239b), PCMCIA_DEVICE_PROD_ID123("Fast Ethernet", "CF Size PC Card", "1.0", 0xb4be14e3, 0x43ac239b, 0x0877b627), PCMCIA_DEVICE_NULL -- cgit v1.2.3-59-g8ed1b From 87e417b2f3a061d5eb85906288738f4313f1d924 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Mon, 17 Dec 2007 14:54:35 +0300 Subject: ucc_geth: really fix section mismatch Commit ed7e63a51d46e835422d89c687b8a3e419a4212a has tried to fix section mismatch: WARNING: vmlinux.o(.init.text+0x17278): Section mismatch: reference to .exit.text:uec_mdio_exit (between 'ucc_geth_init' and 'uec_mdio_init') But that mismatch still happens. This patch actually fixing section mismatch by removing __exit from the header file. Signed-off-by: Anton Vorontsov Signed-off-by: Jeff Garzik --- drivers/net/ucc_geth_mii.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ucc_geth_mii.h b/drivers/net/ucc_geth_mii.h index d83437039919..1e45b2028a50 100644 --- a/drivers/net/ucc_geth_mii.h +++ b/drivers/net/ucc_geth_mii.h @@ -96,5 +96,5 @@ enum enet_tbi_mii_reg { int uec_mdio_read(struct mii_bus *bus, int mii_id, int regnum); int uec_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value); int __init uec_mdio_init(void); -void __exit uec_mdio_exit(void); +void uec_mdio_exit(void); #endif /* __UEC_MII_H */ -- cgit v1.2.3-59-g8ed1b From 961994a0c2a24d9622eea7144b30ac773169659f Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 15 Dec 2007 01:44:33 +0000 Subject: sis190 endianness Check in sis190_rx_interrupt() is broken on big-endian (desc->status is little-endian and everything else actually uses it correctly, including other checks for OWNbit. Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index 49f767bef6ae..7eab072ae792 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -474,7 +474,7 @@ static inline void sis190_map_to_asic(struct RxDesc *desc, dma_addr_t mapping, static inline void sis190_make_unusable_by_asic(struct RxDesc *desc) { desc->PSize = 0x0; - desc->addr = 0xdeadbeef; + desc->addr = cpu_to_le32(0xdeadbeef); desc->size &= cpu_to_le32(RingEnd); wmb(); desc->status = 0x0; @@ -580,7 +580,7 @@ static int sis190_rx_interrupt(struct net_device *dev, struct RxDesc *desc = tp->RxDescRing + entry; u32 status; - if (desc->status & OWNbit) + if (le32_to_cpu(desc->status) & OWNbit) break; status = le32_to_cpu(desc->PSize); @@ -1538,9 +1538,9 @@ static int __devinit sis190_get_mac_addr_from_eeprom(struct pci_dev *pdev, /* Get MAC address from EEPROM */ for (i = 0; i < MAC_ADDR_LEN / 2; i++) { - __le16 w = sis190_read_eeprom(ioaddr, EEPROMMACAddr + i); + u16 w = sis190_read_eeprom(ioaddr, EEPROMMACAddr + i); - ((u16 *)dev->dev_addr)[i] = le16_to_cpu(w); + ((__le16 *)dev->dev_addr)[i] = cpu_to_le16(w); } sis190_set_rgmii(tp, sis190_read_eeprom(ioaddr, EEPROMInfo)); -- cgit v1.2.3-59-g8ed1b From 74cda169fe65ca1dedad6d4a905b13c6ccd87351 Mon Sep 17 00:00:00 2001 From: Stefano Brivio Date: Mon, 19 Nov 2007 20:27:46 +0100 Subject: libertas: add Dan Williams as maintainer Add Dan Williams as maintainer for libertas driver. Signed-off-by: Stefano Brivio Cc: Dan Williams Signed-off-by: John W. Linville --- MAINTAINERS | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 9507b4207512..c331ba391e10 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2489,6 +2489,12 @@ M: mtk.manpages@gmail.com W: ftp://ftp.kernel.org/pub/linux/docs/manpages S: Maintained +MARVELL LIBERTAS WIRELESS DRIVER +P: Dan Williams +M: dcbw@redhat.com +L: libertas-dev@lists.infradead.org +S: Maintained + MARVELL MV643XX ETHERNET DRIVER P: Dale Farnsworth M: dale@farnsworth.org -- cgit v1.2.3-59-g8ed1b From 9313794371ad39e6bf88e1fbef8dfb3bd1ae3fe7 Mon Sep 17 00:00:00 2001 From: Ulrich Kunitz Date: Sat, 1 Dec 2007 11:26:05 +0100 Subject: zd1211rw: Fix alignment problems Shaddy Baddah found an alignment problem with zd1211rw driver at 2007-11-19. This patch fixes it, it is based on the patch proposed by Herbert Xu. The alignment 4 has been the agreed value on the linux-wireless mailing list. Notify that the problem does only affect the old zd1211rw softmac driver and not the zd1211rw-mac80211 driver. Daniel Drake has already provided a patch for the replacement of the softmac driver, which this patch will break. Signed-off-by: Ulrich Kunitz Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_mac.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index a903645e157a..5298a8bf1129 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -1130,6 +1130,8 @@ static void zd_mac_rx(struct zd_mac *mac, struct sk_buff *skb) __skb_trim(skb, skb->len - (IEEE80211_FCS_LEN + sizeof(struct rx_status))); + ZD_ASSERT(IS_ALIGNED((unsigned long)skb->data, 4)); + update_qual_rssi(mac, skb->data, skb->len, stats.signal, status->signal_strength); @@ -1166,15 +1168,19 @@ static void do_rx(unsigned long mac_ptr) int zd_mac_rx_irq(struct zd_mac *mac, const u8 *buffer, unsigned int length) { struct sk_buff *skb; + unsigned int reserved = + ALIGN(max_t(unsigned int, + sizeof(struct zd_rt_hdr), ZD_PLCP_HEADER_SIZE), 4) - + ZD_PLCP_HEADER_SIZE; - skb = dev_alloc_skb(sizeof(struct zd_rt_hdr) + length); + skb = dev_alloc_skb(reserved + length); if (!skb) { struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac); dev_warn(zd_mac_dev(mac), "Could not allocate skb.\n"); ieee->stats.rx_dropped++; return -ENOMEM; } - skb_reserve(skb, sizeof(struct zd_rt_hdr)); + skb_reserve(skb, reserved); memcpy(__skb_put(skb, length), buffer, length); skb_queue_tail(&mac->rx_queue, skb); tasklet_schedule(&mac->rx_tasklet); -- cgit v1.2.3-59-g8ed1b From 2ef19e63e698d740661e04bd6d62ac3305435c61 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 11 Dec 2007 23:20:22 +0100 Subject: wireless/ipw2200.c: add __dev{init,exit} annotations This patch adds __dev{init,exit} annotations. Signed-off-by: Adrian Bunk Signed-off-by: John W. Linville --- drivers/net/wireless/ipw2200.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index 54f44e5473c0..da51f477e9df 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -10751,7 +10751,7 @@ static void ipw_bg_link_down(struct work_struct *work) mutex_unlock(&priv->mutex); } -static int ipw_setup_deferred_work(struct ipw_priv *priv) +static int __devinit ipw_setup_deferred_work(struct ipw_priv *priv) { int ret = 0; @@ -11600,7 +11600,8 @@ static void ipw_prom_free(struct ipw_priv *priv) #endif -static int ipw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +static int __devinit ipw_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) { int err = 0; struct net_device *net_dev; @@ -11767,7 +11768,7 @@ static int ipw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) return err; } -static void ipw_pci_remove(struct pci_dev *pdev) +static void __devexit ipw_pci_remove(struct pci_dev *pdev) { struct ipw_priv *priv = pci_get_drvdata(pdev); struct list_head *p, *q; -- cgit v1.2.3-59-g8ed1b From b808ab16a9c99c00e3d8c3b351977fce62781dd0 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Thu, 13 Dec 2007 15:52:11 -0800 Subject: ieee80211_rate: missed unlock Signed-off-by: Andrew Morton Signed-off-by: John W. Linville --- net/mac80211/ieee80211_rate.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/mac80211/ieee80211_rate.c b/net/mac80211/ieee80211_rate.c index 7254bd609839..3260a4a0ecc5 100644 --- a/net/mac80211/ieee80211_rate.c +++ b/net/mac80211/ieee80211_rate.c @@ -33,6 +33,7 @@ int ieee80211_rate_control_register(struct rate_control_ops *ops) if (!strcmp(alg->ops->name, ops->name)) { /* don't register an algorithm twice */ WARN_ON(1); + mutex_unlock(&rate_ctrl_mutex); return -EALREADY; } } -- cgit v1.2.3-59-g8ed1b From a5acc379e52c78db407c73537daff387b179202c Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Thu, 13 Dec 2007 15:52:12 -0800 Subject: iwlwifi3945/4965: fix rate control algo reference leak Fix rate control algo reference leak in case if network device has been failed to register. In this case special flag priv->mac80211_registered is not set and the rate algo reference is not freeing on module unload. That leads to OOPs in further ieee80211 rate register/unregister procedure (by any callee). It should fix the bug #9470 http://bugzilla.kernel.org/show_bug.cgi?id=9470 [akpm@linux-foundation.org: build fix] Signed-off-by: Cyrill Gorcunov Acked-by: Zhu Yi Signed-off-by: Andrew Morton Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl3945-base.c | 1 + drivers/net/wireless/iwlwifi/iwl4965-base.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 4bdf237f6adc..1c3ca6ebdc4d 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -6171,6 +6171,7 @@ static void iwl_alive_start(struct iwl_priv *priv) mutex_lock(&priv->mutex); if (rc) { + iwl_rate_control_unregister(priv->hw); IWL_ERROR("Failed to register network " "device (error %d)\n", rc); return; diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index 8f85564ec6fa..3b31607a27fc 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -6527,6 +6527,7 @@ static void iwl_alive_start(struct iwl_priv *priv) mutex_lock(&priv->mutex); if (rc) { + iwl_rate_control_unregister(priv->hw); IWL_ERROR("Failed to register network " "device (error %d)\n", rc); return; -- cgit v1.2.3-59-g8ed1b From aaf44a06b7c4864d93660e04701a72153197932c Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 13 Dec 2007 15:52:12 -0800 Subject: libertas: select WIRELESS_EXT Ensure that libertas selects WIRELESS_EXT, since selecting other stuff that should depend on WEXT, like IEEE80211, doesn't seem to drag that in for us. Signed-off-by: Dan Williams Signed-off-by: Andrew Morton Signed-off-by: John W. Linville --- drivers/net/wireless/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 2b733c582915..5583719a0dca 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -264,6 +264,7 @@ config IPW2200_DEBUG config LIBERTAS tristate "Marvell 8xxx Libertas WLAN driver support" depends on WLAN_80211 + select WIRELESS_EXT select IEEE80211 select FW_LOADER ---help--- -- cgit v1.2.3-59-g8ed1b From cb935cb4bd155d50ac98617b580aadd9d7ef3a0f Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 13 Dec 2007 15:52:13 -0800 Subject: bcm43xx_debugfs sscanf fix ia64: drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c: In function `tsf_write_file': drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:237: warning: long long int format, u64 arg (arg 3) drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:237: warning: long long int format, u64 arg (arg 3) We do not know what type was used to implement u64 and we can never use u64 in printk(), sscanf(), etc. Cc: Michael Buesch Signed-off-by: Andrew Morton Signed-off-by: John W. Linville --- drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c b/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c index 35dbe4554513..76e9dd843faa 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c @@ -219,7 +219,7 @@ static ssize_t tsf_write_file(struct file *file, const char __user *user_buf, ssize_t buf_size; ssize_t res; unsigned long flags; - u64 tsf; + unsigned long long tsf; buf_size = min(count, sizeof (really_big_buffer) - 1); down(&big_buffer_sem); -- cgit v1.2.3-59-g8ed1b From 1a8d122782bdabe4475f29d022c9a0c092ac9878 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 14 Dec 2007 13:59:11 +0100 Subject: b43: Fix rfkill radio LED This fixes Bug #9414 Since addition of the rfkill callback, the LED associated with the off switch on the radio has not worked for several reasons: (1) Essential data in the rfkill structure were missing. (2) The rfkill structure was initialized after the LED initialization. (3) There was a minor memory leak if the radio LED structure was inited. Once the above problems were fixed, additional difficulties were noted: (4) The radio LED was in the wrong state at startup. (5) The radio switch had to be manipulated twice for each state change. (6) A circular mutex locking situation existed. (7) If rfkill-input is built as a module, it is not automatically loaded. This patch fixes all of the above. Signed-off-by: Larry Finger Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/wireless/b43/leds.c | 4 ++++ drivers/net/wireless/b43/main.c | 22 +++++++++++----------- drivers/net/wireless/b43/rfkill.c | 37 ++++++++++++++++++++++++++++++++----- 3 files changed, 47 insertions(+), 16 deletions(-) diff --git a/drivers/net/wireless/b43/leds.c b/drivers/net/wireless/b43/leds.c index 19e588582c7c..6c0e2b9f7760 100644 --- a/drivers/net/wireless/b43/leds.c +++ b/drivers/net/wireless/b43/leds.c @@ -163,6 +163,9 @@ static void b43_map_led(struct b43_wldev *dev, b43_register_led(dev, &dev->led_radio, name, b43_rfkill_led_name(dev), led_index, activelow); + /* Sync the RF-kill LED state with the switch state. */ + if (dev->radio_hw_enable) + b43_led_turn_on(dev, led_index, activelow); break; case B43_LED_WEIRD: case B43_LED_ASSOC: @@ -232,4 +235,5 @@ void b43_leds_exit(struct b43_wldev *dev) b43_unregister_led(&dev->led_tx); b43_unregister_led(&dev->led_rx); b43_unregister_led(&dev->led_assoc); + b43_unregister_led(&dev->led_radio); } diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index b45eecc53c4a..1c93b4f4bfe3 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -2163,7 +2163,6 @@ static void b43_mgmtframe_txantenna(struct b43_wldev *dev, int antenna) static void b43_chip_exit(struct b43_wldev *dev) { b43_radio_turn_off(dev, 1); - b43_leds_exit(dev); b43_gpio_cleanup(dev); /* firmware is released later */ } @@ -2191,11 +2190,10 @@ static int b43_chip_init(struct b43_wldev *dev) err = b43_gpio_init(dev); if (err) goto out; /* firmware is released later */ - b43_leds_init(dev); err = b43_upload_initvals(dev); if (err) - goto err_leds_exit; + goto err_gpio_clean; b43_radio_turn_on(dev); b43_write16(dev, 0x03E6, 0x0000); @@ -2271,8 +2269,7 @@ out: err_radio_off: b43_radio_turn_off(dev, 1); -err_leds_exit: - b43_leds_exit(dev); +err_gpio_clean: b43_gpio_cleanup(dev); return err; } @@ -3273,10 +3270,7 @@ static void b43_wireless_core_exit(struct b43_wldev *dev) return; b43_set_status(dev, B43_STAT_UNINIT); - mutex_unlock(&dev->wl->mutex); - b43_rfkill_exit(dev); - mutex_lock(&dev->wl->mutex); - + b43_leds_exit(dev); b43_rng_exit(dev->wl); b43_pio_free(dev); b43_dma_free(dev); @@ -3405,12 +3399,12 @@ static int b43_wireless_core_init(struct b43_wldev *dev) memset(wl->mac_addr, 0, ETH_ALEN); b43_upload_card_macaddress(dev); b43_security_init(dev); - b43_rfkill_init(dev); b43_rng_init(wl); b43_set_status(dev, B43_STAT_INITIALIZED); - out: + b43_leds_init(dev); +out: return err; err_chip_exit: @@ -3499,6 +3493,10 @@ static int b43_start(struct ieee80211_hw *hw) int did_init = 0; int err = 0; + /* First register RFkill. + * LEDs that are registered later depend on it. */ + b43_rfkill_init(dev); + mutex_lock(&wl->mutex); if (b43_status(dev) < B43_STAT_INITIALIZED) { @@ -3528,6 +3526,8 @@ static void b43_stop(struct ieee80211_hw *hw) struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev = wl->current_dev; + b43_rfkill_exit(dev); + mutex_lock(&wl->mutex); if (b43_status(dev) >= B43_STAT_STARTED) b43_wireless_core_stop(dev); diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c index 9b1f905ffbf4..98cf70c5fd47 100644 --- a/drivers/net/wireless/b43/rfkill.c +++ b/drivers/net/wireless/b43/rfkill.c @@ -25,6 +25,8 @@ #include "rfkill.h" #include "b43.h" +#include + /* Returns TRUE, if the radio is enabled in hardware. */ static bool b43_is_hw_radio_enabled(struct b43_wldev *dev) @@ -50,7 +52,10 @@ static void b43_rfkill_poll(struct input_polled_dev *poll_dev) bool report_change = 0; mutex_lock(&wl->mutex); - B43_WARN_ON(b43_status(dev) < B43_STAT_INITIALIZED); + if (unlikely(b43_status(dev) < B43_STAT_INITIALIZED)) { + mutex_unlock(&wl->mutex); + return; + } enabled = b43_is_hw_radio_enabled(dev); if (unlikely(enabled != dev->radio_hw_enable)) { dev->radio_hw_enable = enabled; @@ -60,8 +65,12 @@ static void b43_rfkill_poll(struct input_polled_dev *poll_dev) } mutex_unlock(&wl->mutex); - if (unlikely(report_change)) - input_report_key(poll_dev->input, KEY_WLAN, enabled); + /* send the radio switch event to the system - note both a key press + * and a release are required */ + if (unlikely(report_change)) { + input_report_key(poll_dev->input, KEY_WLAN, 1); + input_report_key(poll_dev->input, KEY_WLAN, 0); + } } /* Called when the RFKILL toggled in software. */ @@ -69,13 +78,15 @@ static int b43_rfkill_soft_toggle(void *data, enum rfkill_state state) { struct b43_wldev *dev = data; struct b43_wl *wl = dev->wl; - int err = 0; + int err = -EBUSY; if (!wl->rfkill.registered) return 0; mutex_lock(&wl->mutex); - B43_WARN_ON(b43_status(dev) < B43_STAT_INITIALIZED); + if (b43_status(dev) < B43_STAT_INITIALIZED) + goto out_unlock; + err = 0; switch (state) { case RFKILL_STATE_ON: if (!dev->radio_hw_enable) { @@ -133,9 +144,25 @@ void b43_rfkill_init(struct b43_wldev *dev) rfk->poll_dev->poll = b43_rfkill_poll; rfk->poll_dev->poll_interval = 1000; /* msecs */ + rfk->poll_dev->input->name = rfk->name; + rfk->poll_dev->input->id.bustype = BUS_HOST; + rfk->poll_dev->input->id.vendor = dev->dev->bus->boardinfo.vendor; + rfk->poll_dev->input->evbit[0] = BIT(EV_KEY); + set_bit(KEY_WLAN, rfk->poll_dev->input->keybit); + err = rfkill_register(rfk->rfkill); if (err) goto err_free_polldev; + +#ifdef CONFIG_RFKILL_INPUT_MODULE + /* B43 RF-kill isn't useful without the rfkill-input subsystem. + * Try to load the module. */ + err = request_module("rfkill-input"); + if (err) + b43warn(wl, "Failed to load the rfkill-input module. " + "The built-in radio LED will not work.\n"); +#endif /* CONFIG_RFKILL_INPUT */ + err = input_register_polled_device(rfk->poll_dev); if (err) goto err_unreg_rfk; -- cgit v1.2.3-59-g8ed1b From 53e490936a91940a153e231c3b8288e3ecfcc5aa Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Thu, 6 Dec 2007 16:08:44 +0800 Subject: iwlwifi: fix rf_kill state inconsistent during suspend and resume The patch fixes the STATUS_RF_KILL_HW state is not cleared problem if the device goes to suspend when the rf_kill switch is enabled. The bug causes the driver always thinks the rf_kill switch is enabled (although it is disabled) after resume. Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl3945-base.c | 4 +++- drivers/net/wireless/iwlwifi/iwl4965-base.c | 4 +++- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 1c3ca6ebdc4d..3d1da0759b97 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -4743,8 +4743,10 @@ static void iwl_irq_tasklet(struct iwl_priv *priv) * when we loaded driver, and is now set to "enable". * After we're Alive, RF_KILL gets handled by * iwl_rx_card_state_notif() */ - if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status)) + if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status)) { + clear_bit(STATUS_RF_KILL_HW, &priv->status); queue_work(priv->workqueue, &priv->restart); + } handled |= CSR_INT_BIT_RF_KILL; } diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index 3b31607a27fc..b54fe5e6d529 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -5059,8 +5059,10 @@ static void iwl_irq_tasklet(struct iwl_priv *priv) * when we loaded driver, and is now set to "enable". * After we're Alive, RF_KILL gets handled by * iwl_rx_card_state_notif() */ - if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status)) + if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status)) { + clear_bit(STATUS_RF_KILL_HW, &priv->status); queue_work(priv->workqueue, &priv->restart); + } handled |= CSR_INT_BIT_RF_KILL; } -- cgit v1.2.3-59-g8ed1b From 8cf32ac6578a70025be1103466da9d1d6141429e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 8 Dec 2007 08:45:27 +0900 Subject: sata_sil: fix spurious IRQ handling Interestingly, sata_sil raises spurious interrupts if it's coupled with Sil SATA_PATA bridge. Currently, sata_sil interrupt handler is strict about spurious interrupts and freezes the port when it occurs. This patch makes it more forgiving. * On SATA PHY event interrupt, serror value is checked to see whether it really is PHYRDY CHG event. If not, SATA PHY event interrupt is ignored. * If ATA interrupt occurs while no command is in progress, it's cleared and ignored. This fixes bugzilla bug 9505. http://bugzilla.kernel.org/show_bug.cgi?id=9505 Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/sata_sil.c | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index 4e6e381279cc..025622b14efb 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -390,23 +390,28 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2) sil_scr_read(ap, SCR_ERROR, &serror); sil_scr_write(ap, SCR_ERROR, serror); - /* Trigger hotplug and accumulate SError only if the - * port isn't already frozen. Otherwise, PHY events - * during hardreset makes controllers with broken SIEN - * repeat probing needlessly. + /* Sometimes spurious interrupts occur, double check + * it's PHYRDY CHG. */ - if (!(ap->pflags & ATA_PFLAG_FROZEN)) { - ata_ehi_hotplugged(&ap->link.eh_info); - ap->link.eh_info.serror |= serror; + if (serror & SERR_PHYRDY_CHG) { + /* Trigger hotplug and accumulate SError only + * if the port isn't already frozen. + * Otherwise, PHY events during hardreset + * makes controllers with broken SIEN repeat + * probing needlessly. + */ + if (!(ap->pflags & ATA_PFLAG_FROZEN)) { + ata_ehi_hotplugged(&ap->link.eh_info); + ap->link.eh_info.serror |= serror; + } + goto freeze; } - goto freeze; + if (!(bmdma2 & SIL_DMA_COMPLETE)) + return; } - if (unlikely(!qc)) - goto freeze; - - if (unlikely(qc->tf.flags & ATA_TFLAG_POLLING)) { + if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) { /* this sometimes happens, just clear IRQ */ ata_chk_status(ap); return; -- cgit v1.2.3-59-g8ed1b From f7fe7ad4bcaba17f05d5cbf1119772c645783b08 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 8 Dec 2007 08:47:01 +0900 Subject: libata: clear link->eh_info.serror from ata_std_postreset() link->eh_info.serror is used to cache SError for controllers which need it cleared from interrupt handler to clear IRQ. It also should be cleared after reset just like SError itself. Make ata_std_postreset() clear link->eh_info.serror too and update sata_sil such that it doesn't care about bookkeeping the value. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 1 + drivers/ata/sata_sil.c | 11 +---------- 2 files changed, 2 insertions(+), 10 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index e4dea8623a71..b0d1dc3cdb2d 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -3923,6 +3923,7 @@ void ata_std_postreset(struct ata_link *link, unsigned int *classes) /* clear SError */ if (sata_scr_read(link, SCR_ERROR, &serror) == 0) sata_scr_write(link, SCR_ERROR, serror); + link->eh_info.serror = 0; /* is double-select really necessary? */ if (classes[0] != ATA_DEV_NONE) diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index 025622b14efb..f5119bf40c24 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -394,16 +394,7 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2) * it's PHYRDY CHG. */ if (serror & SERR_PHYRDY_CHG) { - /* Trigger hotplug and accumulate SError only - * if the port isn't already frozen. - * Otherwise, PHY events during hardreset - * makes controllers with broken SIEN repeat - * probing needlessly. - */ - if (!(ap->pflags & ATA_PFLAG_FROZEN)) { - ata_ehi_hotplugged(&ap->link.eh_info); - ap->link.eh_info.serror |= serror; - } + ap->link.eh_info.serror |= serror; goto freeze; } -- cgit v1.2.3-59-g8ed1b From e41bd3e854e3536de847d5831c0e25a47f394885 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 9 Dec 2007 19:45:39 +0900 Subject: libata: add ST3160023AS / 3.42 to NCQ blacklist Like ST380817AS / 3.42, ST3160023AS / 3.42 times out commands if NCQ is used. Blacklist it. This is reported by Matheus Izvekov in the following thread. http://thread.gmane.org/gmane.linux.ide/24202 Signed-off-by: Tejun Heo Cc: Matheus Izvekov Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index b0d1dc3cdb2d..99a18cea316a 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4150,6 +4150,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "HITACHI HDS7250SASUN500G*", NULL, ATA_HORKAGE_NONCQ }, { "HITACHI HDS7225SBSUN250G*", NULL, ATA_HORKAGE_NONCQ }, { "ST380817AS", "3.42", ATA_HORKAGE_NONCQ }, + { "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ }, /* Blacklist entries taken from Silicon Image 3124/3132 Windows driver .inf file - also several Linux problem reports */ -- cgit v1.2.3-59-g8ed1b From 4e5200334e03e5620aa19d538300c13db270a063 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Tue, 11 Dec 2007 12:58:05 -0500 Subject: sata_mv: improve warnings about Highpoint RocketRAID 23xx cards Improve the existing boot/load time warnings from sata_mv for Highpoint RocketRAID 23xx cards, based on new knowledge about where the BIOS likes to overwrite sectors with metadata. Harmless to us, but very useful for end users. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 30 +++++++++++++++++++++++++----- 1 file changed, 25 insertions(+), 5 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index fe0105d35bae..37b850ae0845 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -2506,11 +2506,31 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) if (pdev->vendor == PCI_VENDOR_ID_TTI && (pdev->device == 0x2300 || pdev->device == 0x2310)) { - printk(KERN_WARNING "sata_mv: Highpoint RocketRAID BIOS" - " will CORRUPT DATA on attached drives when" - " configured as \"Legacy\". BEWARE!\n"); - printk(KERN_WARNING "sata_mv: Use BIOS \"JBOD\" volumes" - " instead for safety.\n"); + /* + * Highpoint RocketRAID PCIe 23xx series cards: + * + * Unconfigured drives are treated as "Legacy" + * by the BIOS, and it overwrites sector 8 with + * a "Lgcy" metadata block prior to Linux boot. + * + * Configured drives (RAID or JBOD) leave sector 8 + * alone, but instead overwrite a high numbered + * sector for the RAID metadata. This sector can + * be determined exactly, by truncating the physical + * drive capacity to a nice even GB value. + * + * RAID metadata is at: (dev->n_sectors & ~0xfffff) + * + * Warn the user, lest they think we're just buggy. + */ + printk(KERN_WARNING DRV_NAME ": Highpoint RocketRAID" + " BIOS CORRUPTS DATA on all attached drives," + " regardless of if/how they are configured." + " BEWARE!\n"); + printk(KERN_WARNING DRV_NAME ": For data safety, do not" + " use sectors 8-9 on \"Legacy\" drives," + " and avoid the final two gigabytes on" + " all RocketRAID BIOS initialized drives.\n"); } case chip_6042: hpriv->ops = &mv6xxx_ops; -- cgit v1.2.3-59-g8ed1b From 0d02f0b22b678b9d6c8ac8cad7b4cfbbdf6fab18 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 15 Dec 2007 15:04:57 +0900 Subject: libata-acpi: adjust constness in ata_acpi_gtm/stm() parameters * No internal function uses const ata_port. Drop const from @ap. * Make ata_acpi_stm() copy @stm before using it and change @stm to const. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-acpi.c | 7 ++++--- include/linux/libata.h | 4 ++-- 2 files changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index 545ea865ceb5..8ae36ad029c5 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -200,7 +200,7 @@ void ata_acpi_associate(struct ata_host *host) * RETURNS: * 0 on success, -ENOENT if _GTM doesn't exist, -errno on failure. */ -int ata_acpi_gtm(const struct ata_port *ap, struct ata_acpi_gtm *gtm) +int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *gtm) { struct acpi_buffer output = { .length = ACPI_ALLOCATE_BUFFER }; union acpi_object *out_obj; @@ -259,15 +259,16 @@ EXPORT_SYMBOL_GPL(ata_acpi_gtm); * RETURNS: * 0 on success, -ENOENT if _STM doesn't exist, -errno on failure. */ -int ata_acpi_stm(const struct ata_port *ap, struct ata_acpi_gtm *stm) +int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm) { acpi_status status; + struct ata_acpi_gtm stm_buf = *stm; struct acpi_object_list input; union acpi_object in_params[3]; in_params[0].type = ACPI_TYPE_BUFFER; in_params[0].buffer.length = sizeof(struct ata_acpi_gtm); - in_params[0].buffer.pointer = (u8 *)stm; + in_params[0].buffer.pointer = (u8 *)&stm_buf; /* Buffers for id may need byteswapping ? */ in_params[1].type = ACPI_TYPE_BUFFER; in_params[1].buffer.length = 512; diff --git a/include/linux/libata.h b/include/linux/libata.h index ef52a07c43d8..1ca9b89632f9 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -940,8 +940,8 @@ enum { /* libata-acpi.c */ #ifdef CONFIG_ATA_ACPI extern int ata_acpi_cbl_80wire(struct ata_port *ap); -int ata_acpi_stm(const struct ata_port *ap, struct ata_acpi_gtm *stm); -int ata_acpi_gtm(const struct ata_port *ap, struct ata_acpi_gtm *stm); +int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm); +int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *stm); #else static inline int ata_acpi_cbl_80wire(struct ata_port *ap) { return 0; } #endif -- cgit v1.2.3-59-g8ed1b From c2e366a107e511ad00c2181c52e4150fc086ec0f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 15 Dec 2007 15:04:58 +0900 Subject: libata: update ata_*_printk() macros such that level can be a variable Make prink helpers format @lv together rather than prepending to the format string as constant. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/libata.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/include/linux/libata.h b/include/linux/libata.h index 1ca9b89632f9..3784af395576 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1013,18 +1013,18 @@ extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, * printk helpers */ #define ata_port_printk(ap, lv, fmt, args...) \ - printk(lv"ata%u: "fmt, (ap)->print_id , ##args) + printk("%sata%u: "fmt, lv, (ap)->print_id , ##args) #define ata_link_printk(link, lv, fmt, args...) do { \ if ((link)->ap->nr_pmp_links) \ - printk(lv"ata%u.%02u: "fmt, (link)->ap->print_id, \ + printk("%sata%u.%02u: "fmt, lv, (link)->ap->print_id, \ (link)->pmp , ##args); \ else \ - printk(lv"ata%u: "fmt, (link)->ap->print_id , ##args); \ + printk("%sata%u: "fmt, lv, (link)->ap->print_id , ##args); \ } while(0) #define ata_dev_printk(dev, lv, fmt, args...) \ - printk(lv"ata%u.%02u: "fmt, (dev)->link->ap->print_id, \ + printk("%sata%u.%02u: "fmt, lv, (dev)->link->ap->print_id, \ (dev)->link->pmp + (dev)->devno , ##args) /* -- cgit v1.2.3-59-g8ed1b From ce2e0abbd31b047ac7be740d28ef710f5bbdb105 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 15 Dec 2007 15:04:59 +0900 Subject: libata: add more opcodes to ata.h Add constants for DEVICE CONFIGURATION OVERLAY and SET_MAX to include/linux/ata.h. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- include/linux/ata.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/include/linux/ata.h b/include/linux/ata.h index 5c4e54a2a8d6..72ab80801ef6 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -190,6 +190,8 @@ enum { ATA_CMD_READ_LOG_EXT = 0x2f, ATA_CMD_PMP_READ = 0xE4, ATA_CMD_PMP_WRITE = 0xE8, + ATA_CMD_CONF_OVERLAY = 0xB1, + ATA_CMD_SEC_FREEZE_LOCK = 0xF5, /* READ_LOG_EXT pages */ ATA_LOG_SATA_NCQ = 0x10, @@ -239,6 +241,19 @@ enum { SATA_AN = 0x05, /* Asynchronous Notification */ SATA_DIPM = 0x03, /* Device Initiated Power Management */ + /* feature values for SET_MAX */ + ATA_SET_MAX_ADDR = 0x00, + ATA_SET_MAX_PASSWD = 0x01, + ATA_SET_MAX_LOCK = 0x02, + ATA_SET_MAX_UNLOCK = 0x03, + ATA_SET_MAX_FREEZE_LOCK = 0x04, + + /* feature values for DEVICE CONFIGURATION OVERLAY */ + ATA_DCO_RESTORE = 0xC0, + ATA_DCO_FREEZE_LOCK = 0xC1, + ATA_DCO_IDENTIFY = 0xC2, + ATA_DCO_SET = 0xC3, + /* ATAPI stuff */ ATAPI_PKT_DMA = (1 << 0), ATAPI_DMADIR = (1 << 2), /* ATAPI data dir: -- cgit v1.2.3-59-g8ed1b From 7f9ad9b8b96855f529f4fe9db0bf32cd3f14c01b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 15 Dec 2007 15:05:00 +0900 Subject: libata: ata_dev_disable() should be called from EH context ata_port_detach() calls ata_dev_disable() with host lock held but ata_dev_disable() should be called from EH context. ata_port_detach() steals EH context by setting ATA_PFLAG_UNLOADAING and flushing EH. Drop locking around ata_dev_disable() and note that ata_port_detach() owns EH context at that point. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 99a18cea316a..c316eacbeddd 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -7210,18 +7210,14 @@ static void ata_port_detach(struct ata_port *ap) ata_port_wait_eh(ap); - /* EH is now guaranteed to see UNLOADING, so no new device - * will be attached. Disable all existing devices. + /* EH is now guaranteed to see UNLOADING - EH context belongs + * to us. Disable all existing devices. */ - spin_lock_irqsave(ap->lock, flags); - ata_port_for_each_link(link, ap) { ata_link_for_each_dev(dev, link) ata_dev_disable(dev); } - spin_unlock_irqrestore(ap->lock, flags); - /* Final freeze & EH. All in-flight commands are aborted. EH * will be skipped and retrials will be terminated with bad * target. -- cgit v1.2.3-59-g8ed1b From 562f0c2d771ee7be6b37fe015f94a929f8056120 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 15 Dec 2007 15:05:01 +0900 Subject: libata-acpi: add new hooks ata_acpi_dissociate() and ata_acpi_on_disable() Add two hooks - ata_acpi_dissociate() which is called during driver detach after the whole host is shutdown and ata_acpi_on_disable() which is called when a device is disabled. Signed-off-by: Tejun heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-acpi.c | 28 ++++++++++++++++++++++++++++ drivers/ata/libata-core.c | 4 ++++ drivers/ata/libata.h | 8 ++++++-- 3 files changed, 38 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index 8ae36ad029c5..9e5fc5d75b2e 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -187,6 +187,21 @@ void ata_acpi_associate(struct ata_host *host) } } +/** + * ata_acpi_dissociate - dissociate ATA host from ACPI objects + * @host: target ATA host + * + * This function is called during driver detach after the whole host + * is shut down. + * + * LOCKING: + * EH context. + */ +void ata_acpi_dissociate(struct ata_host *host) +{ + /* nada */ +} + /** * ata_acpi_gtm - execute _GTM * @ap: target ATA port @@ -716,3 +731,16 @@ int ata_acpi_on_devcfg(struct ata_device *dev) dev->flags |= ATA_DFLAG_ACPI_FAILED; return rc; } + +/** + * ata_acpi_on_disable - ATA ACPI hook called when a device is disabled + * @dev: target ATA device + * + * This function is called when @dev is about to be disabled. + * + * LOCKING: + * EH context. + */ +void ata_acpi_on_disable(struct ata_device *dev) +{ +} diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index c316eacbeddd..4af939a00e54 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -622,6 +622,7 @@ void ata_dev_disable(struct ata_device *dev) if (ata_dev_enabled(dev)) { if (ata_msg_drv(dev->link->ap)) ata_dev_printk(dev, KERN_WARNING, "disabled\n"); + ata_acpi_on_disable(dev); ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 | ATA_DNXFER_QUIET); dev->class++; @@ -7249,6 +7250,9 @@ void ata_host_detach(struct ata_host *host) for (i = 0; i < host->n_ports; i++) ata_port_detach(host->ports[i]); + + /* the host is dead now, dissociate ACPI */ + ata_acpi_dissociate(host); } /** diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 0e6cf3a484dc..bbe59c2fd1e2 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -108,15 +108,19 @@ extern void ata_lpm_schedule(struct ata_port *ap, enum link_pm); #ifdef CONFIG_ATA_ACPI extern void ata_acpi_associate_sata_port(struct ata_port *ap); extern void ata_acpi_associate(struct ata_host *host); +extern void ata_acpi_dissociate(struct ata_host *host); extern int ata_acpi_on_suspend(struct ata_port *ap); extern void ata_acpi_on_resume(struct ata_port *ap); -extern int ata_acpi_on_devcfg(struct ata_device *adev); +extern int ata_acpi_on_devcfg(struct ata_device *dev); +extern void ata_acpi_on_disable(struct ata_device *dev); #else static inline void ata_acpi_associate_sata_port(struct ata_port *ap) { } static inline void ata_acpi_associate(struct ata_host *host) { } +static inline void ata_acpi_dissociate(struct ata_host *host) { } static inline int ata_acpi_on_suspend(struct ata_port *ap) { return 0; } static inline void ata_acpi_on_resume(struct ata_port *ap) { } -static inline int ata_acpi_on_devcfg(struct ata_device *adev) { return 0; } +static inline int ata_acpi_on_devcfg(struct ata_device *dev) { return 0; } +static inline void ata_acpi_on_disable(struct ata_device *dev) { } #endif /* libata-scsi.c */ -- cgit v1.2.3-59-g8ed1b From c05e6ff035c1b25d17364a685432b33937d3dc23 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 15 Dec 2007 15:05:02 +0900 Subject: libata-acpi: implement and use ata_acpi_init_gtm() _GTM fetches currently configured transfer mode while _STM configures controller according to _GTM parameter and prepares transfer mode configuration TFs for _GTF. In many cases _GTM and _STM implementations are quite brittle and can't cope with configuration changed by libata. libata does not depend on ATA ACPI to configure devices. The only reason libata performs _GTM and _STM are to make _GTF evaluation succeed and libata also doesn't care about how _GTF TFs configure transfer mode. It overrides that configuration anyway, so from libata's POV, it doesn't matter what value is feeded to _STM as long as evaluation succeeds for _STM and following _GTF. This patch adds dev->__acpi_init_gtm and store initial _GTM values on host initialization before modified by reset and mode configuration. If the field is valid, ata_acpi_init_gtm() returns pointer to the saved _GTM structure; otherwise, NULL. This saved value is used for _STM during resume and peek at BIOS/firmware programmed initial timing for later use. The accessor is there to make building w/o ACPI easy as dev->__acpi_init doesn't exist if ACPI is not enabled. On driver detach, the initial BIOS configuration is restored by executing _STM with the initial _GTM values such that the next driver can also use the initial BIOS configured values. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-acpi.c | 62 +++++++++++++++++++++-------------------------- include/linux/libata.h | 14 +++++++++-- 2 files changed, 39 insertions(+), 37 deletions(-) diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index 9e5fc5d75b2e..b3aeca368774 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -94,6 +94,9 @@ static void ata_acpi_associate_ide_port(struct ata_port *ap) dev->acpi_handle = acpi_get_child(ap->acpi_handle, i); } + + if (ata_acpi_gtm(ap, &ap->__acpi_init_gtm) == 0) + ap->pflags |= ATA_PFLAG_INIT_GTM_VALID; } static void ata_acpi_handle_hotplug(struct ata_port *ap, struct kobject *kobj, @@ -199,7 +202,18 @@ void ata_acpi_associate(struct ata_host *host) */ void ata_acpi_dissociate(struct ata_host *host) { - /* nada */ + int i; + + /* Restore initial _GTM values so that driver which attaches + * afterward can use them too. + */ + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap); + + if (ap->acpi_handle && gtm) + ata_acpi_stm(ap, gtm); + } } /** @@ -409,22 +423,21 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf, int ata_acpi_cbl_80wire(struct ata_port *ap) { - struct ata_acpi_gtm gtm; + const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap); int valid = 0; - /* No _GTM data, no information */ - if (ata_acpi_gtm(ap, >m) < 0) + if (!gtm) return 0; /* Split timing, DMA enabled */ - if ((gtm.flags & 0x11) == 0x11 && gtm.drive[0].dma < 55) + if ((gtm->flags & 0x11) == 0x11 && gtm->drive[0].dma < 55) valid |= 1; - if ((gtm.flags & 0x14) == 0x14 && gtm.drive[1].dma < 55) + if ((gtm->flags & 0x14) == 0x14 && gtm->drive[1].dma < 55) valid |= 2; /* Shared timing, DMA enabled */ - if ((gtm.flags & 0x11) == 0x01 && gtm.drive[0].dma < 55) + if ((gtm->flags & 0x11) == 0x01 && gtm->drive[0].dma < 55) valid |= 1; - if ((gtm.flags & 0x14) == 0x04 && gtm.drive[0].dma < 55) + if ((gtm->flags & 0x14) == 0x04 && gtm->drive[0].dma < 55) valid |= 2; /* Drive check */ @@ -612,27 +625,8 @@ static int ata_acpi_push_id(struct ata_device *dev) */ int ata_acpi_on_suspend(struct ata_port *ap) { - unsigned long flags; - int rc; - - /* proceed iff per-port acpi_handle is valid */ - if (!ap->acpi_handle) - return 0; - BUG_ON(ap->flags & ATA_FLAG_ACPI_SATA); - - /* store timing parameters */ - rc = ata_acpi_gtm(ap, &ap->acpi_gtm); - - spin_lock_irqsave(ap->lock, flags); - if (rc == 0) - ap->pflags |= ATA_PFLAG_GTM_VALID; - else - ap->pflags &= ~ATA_PFLAG_GTM_VALID; - spin_unlock_irqrestore(ap->lock, flags); - - if (rc == -ENOENT) - rc = 0; - return rc; + /* nada */ + return 0; } /** @@ -647,14 +641,12 @@ int ata_acpi_on_suspend(struct ata_port *ap) */ void ata_acpi_on_resume(struct ata_port *ap) { + const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap); struct ata_device *dev; - if (ap->acpi_handle && (ap->pflags & ATA_PFLAG_GTM_VALID)) { - BUG_ON(ap->flags & ATA_FLAG_ACPI_SATA); - - /* restore timing parameters */ - ata_acpi_stm(ap, &ap->acpi_gtm); - } + /* restore timing parameters */ + if (ap->acpi_handle && gtm) + ata_acpi_stm(ap, gtm); /* schedule _GTF */ ata_link_for_each_dev(dev, &ap->link) diff --git a/include/linux/libata.h b/include/linux/libata.h index 3784af395576..ba84d8a37545 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -211,7 +211,7 @@ enum { ATA_PFLAG_SUSPENDED = (1 << 17), /* port is suspended (power) */ ATA_PFLAG_PM_PENDING = (1 << 18), /* PM operation pending */ - ATA_PFLAG_GTM_VALID = (1 << 19), /* acpi_gtm data valid */ + ATA_PFLAG_INIT_GTM_VALID = (1 << 19), /* initial gtm data valid */ /* struct ata_queued_cmd flags */ ATA_QCFLAG_ACTIVE = (1 << 0), /* cmd not yet ack'd to scsi lyer */ @@ -653,7 +653,7 @@ struct ata_port { #ifdef CONFIG_ATA_ACPI acpi_handle acpi_handle; - struct ata_acpi_gtm acpi_gtm; + struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */ #endif u8 sector_buf[ATA_SECT_SIZE]; /* owned by EH */ }; @@ -939,10 +939,20 @@ enum { /* libata-acpi.c */ #ifdef CONFIG_ATA_ACPI +static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap) +{ + if (ap->pflags & ATA_PFLAG_INIT_GTM_VALID) + return &ap->__acpi_init_gtm; + return NULL; +} extern int ata_acpi_cbl_80wire(struct ata_port *ap); int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm); int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *stm); #else +static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap) +{ + return NULL; +} static inline int ata_acpi_cbl_80wire(struct ata_port *ap) { return 0; } #endif -- cgit v1.2.3-59-g8ed1b From 398e07826b24cbeb5ff2f0a178367fc9d24cd475 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 15 Dec 2007 15:05:03 +0900 Subject: libata-acpi: implement dev->gtf_cache and evaluate _GTF right after _STM during resume On certain implementations, _GTF evaluation depends on preceding _STM and both can be pretty picky about the configuration. Using _GTM result cached during controller initialization satisfies the most neurotic _STM implementation. However, libata evaluates _GTF after reset during device configuration and the hardware state can be different from what _GTF expects and can cause evaluation failure. This patch adds dev->gtf_cache and updates ata_dev_get_GTF() such that it uses the cached value if available. Cache is cleared with a call to ata_acpi_clear_gtf(). Because for SATA ACPI nodes _GTF must be evaluated after _SDD which can't be done till IDENTIFY is complete, _GTF caching from ata_acpi_on_resume() is used only for IDE ACPI nodes. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-acpi.c | 69 +++++++++++++++++++++++++++++++++-------------- include/linux/libata.h | 1 + 2 files changed, 50 insertions(+), 20 deletions(-) diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index b3aeca368774..e0dd132fd490 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -41,6 +41,12 @@ static int is_pci_dev(struct device *dev) return (dev->bus == &pci_bus_type); } +static void ata_acpi_clear_gtf(struct ata_device *dev) +{ + kfree(dev->gtf_cache); + dev->gtf_cache = NULL; +} + /** * ata_acpi_associate_sata_port - associate SATA port with ACPI objects * @ap: target SATA port @@ -327,7 +333,6 @@ EXPORT_SYMBOL_GPL(ata_acpi_stm); * ata_dev_get_GTF - get the drive bootup default taskfile settings * @dev: target ATA device * @gtf: output parameter for buffer containing _GTF taskfile arrays - * @ptr_to_free: pointer which should be freed * * This applies to both PATA and SATA drives. * @@ -344,8 +349,7 @@ EXPORT_SYMBOL_GPL(ata_acpi_stm); * Number of taskfiles on success, 0 if _GTF doesn't exist or doesn't * contain valid data. */ -static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf, - void **ptr_to_free) +static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf) { struct ata_port *ap = dev->link->ap; acpi_status status; @@ -353,6 +357,12 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf, union acpi_object *out_obj; int rc = 0; + /* if _GTF is cached, use the cached value */ + if (dev->gtf_cache) { + out_obj = dev->gtf_cache; + goto done; + } + /* set up output buffer */ output.length = ACPI_ALLOCATE_BUFFER; output.pointer = NULL; /* ACPI-CA sets this; save/free it later */ @@ -363,6 +373,7 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf, /* _GTF has no input parameters */ status = acpi_evaluate_object(dev->acpi_handle, "_GTF", NULL, &output); + out_obj = dev->gtf_cache = output.pointer; if (ACPI_FAILURE(status)) { if (status != AE_NOT_FOUND) { @@ -383,7 +394,6 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf, goto out_free; } - out_obj = output.pointer; if (out_obj->type != ACPI_TYPE_BUFFER) { ata_dev_printk(dev, KERN_WARNING, "_GTF unexpected object type 0x%x\n", @@ -398,18 +408,19 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf, goto out_free; } - *ptr_to_free = out_obj; - *gtf = (void *)out_obj->buffer.pointer; + done: rc = out_obj->buffer.length / REGS_PER_GTF; - - if (ata_msg_probe(ap)) - ata_dev_printk(dev, KERN_DEBUG, "%s: returning " - "gtf=%p, gtf_count=%d, ptr_to_free=%p\n", - __FUNCTION__, *gtf, rc, *ptr_to_free); + if (gtf) { + *gtf = (void *)out_obj->buffer.pointer; + if (ata_msg_probe(ap)) + ata_dev_printk(dev, KERN_DEBUG, + "%s: returning gtf=%p, gtf_count=%d\n", + __FUNCTION__, *gtf, rc); + } return rc; out_free: - kfree(output.pointer); + ata_acpi_clear_gtf(dev); return rc; } @@ -533,11 +544,10 @@ static int taskfile_load_raw(struct ata_device *dev, static int ata_acpi_exec_tfs(struct ata_device *dev) { struct ata_acpi_gtf *gtf = NULL; - void *ptr_to_free = NULL; int gtf_count, i, rc; /* get taskfiles */ - gtf_count = ata_dev_get_GTF(dev, >f, &ptr_to_free); + gtf_count = ata_dev_get_GTF(dev, >f); /* execute them */ for (i = 0, rc = 0; i < gtf_count; i++) { @@ -551,7 +561,7 @@ static int ata_acpi_exec_tfs(struct ata_device *dev) rc = tmp; } - kfree(ptr_to_free); + ata_acpi_clear_gtf(dev); if (rc == 0) return gtf_count; @@ -644,13 +654,31 @@ void ata_acpi_on_resume(struct ata_port *ap) const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap); struct ata_device *dev; - /* restore timing parameters */ - if (ap->acpi_handle && gtm) + if (ap->acpi_handle && gtm) { + /* _GTM valid */ + + /* restore timing parameters */ ata_acpi_stm(ap, gtm); - /* schedule _GTF */ - ata_link_for_each_dev(dev, &ap->link) - dev->flags |= ATA_DFLAG_ACPI_PENDING; + /* _GTF should immediately follow _STM so that it can + * use values set by _STM. Cache _GTF result and + * schedule _GTF. + */ + ata_link_for_each_dev(dev, &ap->link) { + ata_acpi_clear_gtf(dev); + if (ata_dev_get_GTF(dev, NULL) >= 0) + dev->flags |= ATA_DFLAG_ACPI_PENDING; + } + } else { + /* SATA _GTF needs to be evaulated after _SDD and + * there's no reason to evaluate IDE _GTF early + * without _STM. Clear cache and schedule _GTF. + */ + ata_link_for_each_dev(dev, &ap->link) { + ata_acpi_clear_gtf(dev); + dev->flags |= ATA_DFLAG_ACPI_PENDING; + } + } } /** @@ -735,4 +763,5 @@ int ata_acpi_on_devcfg(struct ata_device *dev) */ void ata_acpi_on_disable(struct ata_device *dev) { + ata_acpi_clear_gtf(dev); } diff --git a/include/linux/libata.h b/include/linux/libata.h index ba84d8a37545..cb91280be9bd 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -498,6 +498,7 @@ struct ata_device { struct scsi_device *sdev; /* attached SCSI device */ #ifdef CONFIG_ATA_ACPI acpi_handle acpi_handle; + union acpi_object *gtf_cache; #endif /* n_sector is used as CLEAR_OFFSET, read comment above CLEAR_OFFSET */ u64 n_sectors; /* size of device, if ATA */ -- cgit v1.2.3-59-g8ed1b From 66fa7f2158e84530aa4a1839a3500d6bdb231301 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 15 Dec 2007 15:05:04 +0900 Subject: libata-acpi: improve ACPI disabling * If _GTF evalution fails, it's pointless to retry. If nothing else is wrong, just ignore the error. * After disabling ACPI, return success iff the number of executed _GTF command equals zero. Otherwise, tell EH to retry. This change fixes bogus 1 return bug where ata_acpi_on_devcfg() expects the caller to reload IDENTIFY data and continue but the caller interprets it as an error. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-acpi.c | 59 ++++++++++++++++++++++++++++++----------------- 1 file changed, 38 insertions(+), 21 deletions(-) diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index e0dd132fd490..5932ae24ddc1 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -346,8 +346,8 @@ EXPORT_SYMBOL_GPL(ata_acpi_stm); * EH context. * * RETURNS: - * Number of taskfiles on success, 0 if _GTF doesn't exist or doesn't - * contain valid data. + * Number of taskfiles on success, 0 if _GTF doesn't exist. -EINVAL + * if _GTF is invalid. */ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf) { @@ -380,6 +380,7 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf) ata_dev_printk(dev, KERN_WARNING, "_GTF evaluation failed (AE 0x%x)\n", status); + rc = -EINVAL; } goto out_free; } @@ -391,6 +392,7 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf) __FUNCTION__, (unsigned long long)output.length, output.pointer); + rc = -EINVAL; goto out_free; } @@ -398,6 +400,7 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf) ata_dev_printk(dev, KERN_WARNING, "_GTF unexpected object type 0x%x\n", out_obj->type); + rc = -EINVAL; goto out_free; } @@ -405,6 +408,7 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf) ata_dev_printk(dev, KERN_WARNING, "unexpected _GTF length (%d)\n", out_obj->buffer.length); + rc = -EINVAL; goto out_free; } @@ -531,6 +535,7 @@ static int taskfile_load_raw(struct ata_device *dev, /** * ata_acpi_exec_tfs - get then write drive taskfile settings * @dev: target ATA device + * @nr_executed: out paramter for the number of executed commands * * Evaluate _GTF and excute returned taskfiles. * @@ -538,16 +543,19 @@ static int taskfile_load_raw(struct ata_device *dev, * EH context. * * RETURNS: - * Number of executed taskfiles on success, 0 if _GTF doesn't exist or - * doesn't contain valid data. -errno on other errors. + * Number of executed taskfiles on success, 0 if _GTF doesn't exist. + * -errno on other errors. */ -static int ata_acpi_exec_tfs(struct ata_device *dev) +static int ata_acpi_exec_tfs(struct ata_device *dev, int *nr_executed) { struct ata_acpi_gtf *gtf = NULL; int gtf_count, i, rc; /* get taskfiles */ - gtf_count = ata_dev_get_GTF(dev, >f); + rc = ata_dev_get_GTF(dev, >f); + if (rc < 0) + return rc; + gtf_count = rc; /* execute them */ for (i = 0, rc = 0; i < gtf_count; i++) { @@ -559,12 +567,12 @@ static int ata_acpi_exec_tfs(struct ata_device *dev) tmp = taskfile_load_raw(dev, gtf++); if (!rc) rc = tmp; + + (*nr_executed)++; } ata_acpi_clear_gtf(dev); - if (rc == 0) - return gtf_count; return rc; } @@ -700,6 +708,7 @@ int ata_acpi_on_devcfg(struct ata_device *dev) struct ata_port *ap = dev->link->ap; struct ata_eh_context *ehc = &ap->link.eh_context; int acpi_sata = ap->flags & ATA_FLAG_ACPI_SATA; + int nr_executed = 0; int rc; if (!dev->acpi_handle) @@ -718,14 +727,14 @@ int ata_acpi_on_devcfg(struct ata_device *dev) } /* do _GTF */ - rc = ata_acpi_exec_tfs(dev); - if (rc < 0) + rc = ata_acpi_exec_tfs(dev, &nr_executed); + if (rc) goto acpi_err; dev->flags &= ~ATA_DFLAG_ACPI_PENDING; /* refresh IDENTIFY page if any _GTF command has been executed */ - if (rc > 0) { + if (nr_executed) { rc = ata_dev_reread_id(dev, 0); if (rc < 0) { ata_dev_printk(dev, KERN_ERR, "failed to IDENTIFY " @@ -737,18 +746,26 @@ int ata_acpi_on_devcfg(struct ata_device *dev) return 0; acpi_err: - /* let EH retry on the first failure, disable ACPI on the second */ - if (dev->flags & ATA_DFLAG_ACPI_FAILED) { - ata_dev_printk(dev, KERN_WARNING, "ACPI on devcfg failed the " - "second time, disabling (errno=%d)\n", rc); - - dev->acpi_handle = NULL; + /* ignore evaluation failure if we can continue safely */ + if (rc == -EINVAL && !nr_executed && !(ap->pflags & ATA_PFLAG_FROZEN)) + return 0; - /* if port is working, request IDENTIFY reload and continue */ - if (!(ap->pflags & ATA_PFLAG_FROZEN)) - rc = 1; + /* fail and let EH retry once more for unknown IO errors */ + if (!(dev->flags & ATA_DFLAG_ACPI_FAILED)) { + dev->flags |= ATA_DFLAG_ACPI_FAILED; + return rc; } - dev->flags |= ATA_DFLAG_ACPI_FAILED; + + ata_dev_printk(dev, KERN_WARNING, + "ACPI: failed the second time, disabled\n"); + dev->acpi_handle = NULL; + + /* We can safely continue if no _GTF command has been executed + * and port is not frozen. + */ + if (!nr_executed && !(ap->pflags & ATA_PFLAG_FROZEN)) + return 0; + return rc; } -- cgit v1.2.3-59-g8ed1b From 0e8634bf8e48e50aa96c7e7becafcf9d98c1a28d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 15 Dec 2007 15:05:05 +0900 Subject: libata-acpi: improve _GTF execution error handling and reporting As _GTF commands can't transfer data, device error never signals transfer error. It indicates that the device vetoed the operation, so it's meaningless to retry. This patch makes libata-acpi to report and continue on device errors when executing _GTF commands. Also commands rejected by device don't contribute to the number of _GTF commands executed. While at it, update _GTF execution reporting such that all successful commands are logged at KERN_DEBUG and rename taskfile_load_raw() to ata_acpi_run_tf() for consistency. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-acpi.c | 77 ++++++++++++++++++++++++++++------------------- 1 file changed, 46 insertions(+), 31 deletions(-) diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index 5932ae24ddc1..d4cb557a727d 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -466,7 +466,7 @@ int ata_acpi_cbl_80wire(struct ata_port *ap) EXPORT_SYMBOL_GPL(ata_acpi_cbl_80wire); /** - * taskfile_load_raw - send taskfile registers to host controller + * ata_acpi_run_tf - send taskfile registers to host controller * @dev: target ATA device * @gtf: raw ATA taskfile register set (0x1f1 - 0x1f7) * @@ -485,14 +485,17 @@ EXPORT_SYMBOL_GPL(ata_acpi_cbl_80wire); * EH context. * * RETURNS: - * 0 on success, -errno on failure. + * 1 if command is executed successfully. 0 if ignored or rejected, + * -errno on other errors. */ -static int taskfile_load_raw(struct ata_device *dev, - const struct ata_acpi_gtf *gtf) +static int ata_acpi_run_tf(struct ata_device *dev, + const struct ata_acpi_gtf *gtf) { - struct ata_port *ap = dev->link->ap; struct ata_taskfile tf, rtf; unsigned int err_mask; + const char *level; + char msg[60]; + int rc; if ((gtf->tf[0] == 0) && (gtf->tf[1] == 0) && (gtf->tf[2] == 0) && (gtf->tf[3] == 0) && (gtf->tf[4] == 0) && (gtf->tf[5] == 0) @@ -512,24 +515,39 @@ static int taskfile_load_raw(struct ata_device *dev, tf.device = gtf->tf[5]; /* 0x1f6 */ tf.command = gtf->tf[6]; /* 0x1f7 */ - if (ata_msg_probe(ap)) - ata_dev_printk(dev, KERN_DEBUG, "executing ACPI cmd " - "%02x/%02x:%02x:%02x:%02x:%02x:%02x\n", - tf.command, tf.feature, tf.nsect, - tf.lbal, tf.lbam, tf.lbah, tf.device); - rtf = tf; err_mask = ata_exec_internal(dev, &rtf, NULL, DMA_NONE, NULL, 0, 0); - if (err_mask) { - ata_dev_printk(dev, KERN_ERR, - "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x failed " - "(Emask=0x%x Stat=0x%02x Err=0x%02x)\n", - tf.command, tf.feature, tf.nsect, tf.lbal, tf.lbam, - tf.lbah, tf.device, err_mask, rtf.command, rtf.feature); - return -EIO; + + switch (err_mask) { + case 0: + level = KERN_DEBUG; + snprintf(msg, sizeof(msg), "succeeded"); + rc = 1; + break; + + case AC_ERR_DEV: + level = KERN_INFO; + snprintf(msg, sizeof(msg), + "rejected by device (Stat=0x%02x Err=0x%02x)", + rtf.command, rtf.feature); + rc = 0; + break; + + default: + level = KERN_ERR; + snprintf(msg, sizeof(msg), + "failed (Emask=0x%x Stat=0x%02x Err=0x%02x)", + err_mask, rtf.command, rtf.feature); + rc = -EIO; + break; } - return 0; + ata_dev_printk(dev, level, + "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x %s\n", + tf.command, tf.feature, tf.nsect, tf.lbal, + tf.lbam, tf.lbah, tf.device, msg); + + return rc; } /** @@ -558,22 +576,19 @@ static int ata_acpi_exec_tfs(struct ata_device *dev, int *nr_executed) gtf_count = rc; /* execute them */ - for (i = 0, rc = 0; i < gtf_count; i++) { - int tmp; - - /* ACPI errors are eventually ignored. Run till the - * end even after errors. - */ - tmp = taskfile_load_raw(dev, gtf++); - if (!rc) - rc = tmp; - - (*nr_executed)++; + for (i = 0; i < gtf_count; i++) { + rc = ata_acpi_run_tf(dev, gtf++); + if (rc < 0) + break; + if (rc) + (*nr_executed)++; } ata_acpi_clear_gtf(dev); - return rc; + if (rc < 0) + return rc; + return 0; } /** -- cgit v1.2.3-59-g8ed1b From 3264a8d8f95348e05cc6ac1ce747a8339ed7ab08 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 15 Dec 2007 15:05:06 +0900 Subject: libata-acpi: implement _GTF command filtering Implement _GTF command filtering which can be controlled by libata.acpi_filter kernel parameter. Currently SETXFER and LOCK commands are filtered. libata configures transfer mode by itself and _GTF SETXFER commands can potentially disrupt device configuration. _GTM/_STM mechanism can't handle hotplugging too well and when _GTF is executed, controller is in PIO0 rather than the mode _STM configured. Note that detecting SET MAX LOCK requires looking at the previous command. This adds a bit to code complexity. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-acpi.c | 159 +++++++++++++++++++++++++++++++++------------- 1 file changed, 115 insertions(+), 44 deletions(-) diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index d4cb557a727d..7bf4befd96bc 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -6,6 +6,7 @@ * Copyright (C) 2006 Randy Dunlap */ +#include #include #include #include @@ -25,6 +26,18 @@ #include #include +enum { + ATA_ACPI_FILTER_SETXFER = 1 << 0, + ATA_ACPI_FILTER_LOCK = 1 << 1, + + ATA_ACPI_FILTER_DEFAULT = ATA_ACPI_FILTER_SETXFER | + ATA_ACPI_FILTER_LOCK, +}; + +static unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT; +module_param_named(acpi_gtf_filter, ata_acpi_gtf_filter, int, 0644); +MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock)"); + #define NO_PORT_MULT 0xffff #define SATA_ADR(root, pmp) (((root) << 16) | (pmp)) @@ -465,6 +478,60 @@ int ata_acpi_cbl_80wire(struct ata_port *ap) EXPORT_SYMBOL_GPL(ata_acpi_cbl_80wire); +static void ata_acpi_gtf_to_tf(struct ata_device *dev, + const struct ata_acpi_gtf *gtf, + struct ata_taskfile *tf) +{ + ata_tf_init(dev, tf); + + tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf->protocol = ATA_PROT_NODATA; + tf->feature = gtf->tf[0]; /* 0x1f1 */ + tf->nsect = gtf->tf[1]; /* 0x1f2 */ + tf->lbal = gtf->tf[2]; /* 0x1f3 */ + tf->lbam = gtf->tf[3]; /* 0x1f4 */ + tf->lbah = gtf->tf[4]; /* 0x1f5 */ + tf->device = gtf->tf[5]; /* 0x1f6 */ + tf->command = gtf->tf[6]; /* 0x1f7 */ +} + +static int ata_acpi_filter_tf(const struct ata_taskfile *tf, + const struct ata_taskfile *ptf) +{ + if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_SETXFER) { + /* libata doesn't use ACPI to configure transfer mode. + * It will only confuse device configuration. Skip. + */ + if (tf->command == ATA_CMD_SET_FEATURES && + tf->feature == SETFEATURES_XFER) + return 1; + } + + if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_LOCK) { + /* BIOS writers, sorry but we don't wanna lock + * features unless the user explicitly said so. + */ + + /* DEVICE CONFIGURATION FREEZE LOCK */ + if (tf->command == ATA_CMD_CONF_OVERLAY && + tf->feature == ATA_DCO_FREEZE_LOCK) + return 1; + + /* SECURITY FREEZE LOCK */ + if (tf->command == ATA_CMD_SEC_FREEZE_LOCK) + return 1; + + /* SET MAX LOCK and SET MAX FREEZE LOCK */ + if ((!ptf || ptf->command != ATA_CMD_READ_NATIVE_MAX) && + tf->command == ATA_CMD_SET_MAX && + (tf->feature == ATA_SET_MAX_LOCK || + tf->feature == ATA_SET_MAX_FREEZE_LOCK)) + return 1; + } + + return 0; +} + /** * ata_acpi_run_tf - send taskfile registers to host controller * @dev: target ATA device @@ -485,13 +552,15 @@ EXPORT_SYMBOL_GPL(ata_acpi_cbl_80wire); * EH context. * * RETURNS: - * 1 if command is executed successfully. 0 if ignored or rejected, - * -errno on other errors. + * 1 if command is executed successfully. 0 if ignored, rejected or + * filtered out, -errno on other errors. */ static int ata_acpi_run_tf(struct ata_device *dev, - const struct ata_acpi_gtf *gtf) + const struct ata_acpi_gtf *gtf, + const struct ata_acpi_gtf *prev_gtf) { - struct ata_taskfile tf, rtf; + struct ata_taskfile *pptf = NULL; + struct ata_taskfile tf, ptf, rtf; unsigned int err_mask; const char *level; char msg[60]; @@ -502,44 +571,44 @@ static int ata_acpi_run_tf(struct ata_device *dev, && (gtf->tf[6] == 0)) return 0; - ata_tf_init(dev, &tf); - - /* convert gtf to tf */ - tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; /* TBD */ - tf.protocol = ATA_PROT_NODATA; - tf.feature = gtf->tf[0]; /* 0x1f1 */ - tf.nsect = gtf->tf[1]; /* 0x1f2 */ - tf.lbal = gtf->tf[2]; /* 0x1f3 */ - tf.lbam = gtf->tf[3]; /* 0x1f4 */ - tf.lbah = gtf->tf[4]; /* 0x1f5 */ - tf.device = gtf->tf[5]; /* 0x1f6 */ - tf.command = gtf->tf[6]; /* 0x1f7 */ - - rtf = tf; - err_mask = ata_exec_internal(dev, &rtf, NULL, DMA_NONE, NULL, 0, 0); - - switch (err_mask) { - case 0: - level = KERN_DEBUG; - snprintf(msg, sizeof(msg), "succeeded"); - rc = 1; - break; - - case AC_ERR_DEV: + ata_acpi_gtf_to_tf(dev, gtf, &tf); + if (prev_gtf) { + ata_acpi_gtf_to_tf(dev, prev_gtf, &ptf); + pptf = &ptf; + } + + if (!ata_acpi_filter_tf(&tf, pptf)) { + rtf = tf; + err_mask = ata_exec_internal(dev, &rtf, NULL, + DMA_NONE, NULL, 0, 0); + + switch (err_mask) { + case 0: + level = KERN_DEBUG; + snprintf(msg, sizeof(msg), "succeeded"); + rc = 1; + break; + + case AC_ERR_DEV: + level = KERN_INFO; + snprintf(msg, sizeof(msg), + "rejected by device (Stat=0x%02x Err=0x%02x)", + rtf.command, rtf.feature); + rc = 0; + break; + + default: + level = KERN_ERR; + snprintf(msg, sizeof(msg), + "failed (Emask=0x%x Stat=0x%02x Err=0x%02x)", + err_mask, rtf.command, rtf.feature); + rc = -EIO; + break; + } + } else { level = KERN_INFO; - snprintf(msg, sizeof(msg), - "rejected by device (Stat=0x%02x Err=0x%02x)", - rtf.command, rtf.feature); + snprintf(msg, sizeof(msg), "filtered out"); rc = 0; - break; - - default: - level = KERN_ERR; - snprintf(msg, sizeof(msg), - "failed (Emask=0x%x Stat=0x%02x Err=0x%02x)", - err_mask, rtf.command, rtf.feature); - rc = -EIO; - break; } ata_dev_printk(dev, level, @@ -566,7 +635,7 @@ static int ata_acpi_run_tf(struct ata_device *dev, */ static int ata_acpi_exec_tfs(struct ata_device *dev, int *nr_executed) { - struct ata_acpi_gtf *gtf = NULL; + struct ata_acpi_gtf *gtf = NULL, *pgtf = NULL; int gtf_count, i, rc; /* get taskfiles */ @@ -576,12 +645,14 @@ static int ata_acpi_exec_tfs(struct ata_device *dev, int *nr_executed) gtf_count = rc; /* execute them */ - for (i = 0; i < gtf_count; i++) { - rc = ata_acpi_run_tf(dev, gtf++); + for (i = 0; i < gtf_count; i++, gtf++) { + rc = ata_acpi_run_tf(dev, gtf, pgtf); if (rc < 0) break; - if (rc) + if (rc) { (*nr_executed)++; + pgtf = gtf; + } } ata_acpi_clear_gtf(dev); -- cgit v1.2.3-59-g8ed1b From f2dfc1a12bb1a029df62b018a8e1882e91041025 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 12 Dec 2007 12:12:46 +0900 Subject: libata: update atapi_eh_request_sense() such that lbam/lbah contains buffer size While updating lbam/h for ATAPI commands, atapi_eh_request_sense() was left out. Update it. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index e6605f038647..f0124a8d3134 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1264,8 +1264,8 @@ static unsigned int atapi_eh_request_sense(struct ata_queued_cmd *qc) tf.feature |= ATAPI_PKT_DMA; } else { tf.protocol = ATA_PROT_ATAPI; - tf.lbam = (8 * 1024) & 0xff; - tf.lbah = (8 * 1024) >> 8; + tf.lbam = SCSI_SENSE_BUFFERSIZE; + tf.lbah = 0; } return ata_exec_internal(dev, &tf, cdb, DMA_FROM_DEVICE, -- cgit v1.2.3-59-g8ed1b From 140b5e59119a172a91b5fa13d54ca4f79bbefee1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 12 Dec 2007 12:21:52 +0900 Subject: libata: fix ATAPI draining With ATAPI transfer chunk size properly programmed, libata PIO HSM should be able to handle full spurious data chunks. Also, it's a good idea to suppress trailing data warning for misc ATAPI commands as there can be many of them per command - for example, if the chunk size is 16 and the drive tries to transfer 510 bytes, there can be 31 trailing data messages. This patch makes the following updates to libata ATAPI PIO HSM implementation. * Make it drain full spurious chunks. * Suppress trailing data warning message for misc commands. * Put limit on how many bytes can be drained. * If odd, round up consumed bytes and the number of bytes to be drained. This gets the number of bytes to drain right for drivers which do 16bit PIO. This patch is partial backport of improve-ATAPI-data-xfer patchset pending for #upstream. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 87 +++++++++++++++++++++++++++++++++++------------ include/linux/libata.h | 2 ++ 2 files changed, 67 insertions(+), 22 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 4af939a00e54..4753a1831dbc 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -64,6 +64,7 @@ #include #include #include +#include #include "libata.h" @@ -4651,6 +4652,43 @@ int ata_check_atapi_dma(struct ata_queued_cmd *qc) return 0; } +/** + * atapi_qc_may_overflow - Check whether data transfer may overflow + * @qc: ATA command in question + * + * ATAPI commands which transfer variable length data to host + * might overflow due to application error or hardare bug. This + * function checks whether overflow should be drained and ignored + * for @qc. + * + * LOCKING: + * None. + * + * RETURNS: + * 1 if @qc may overflow; otherwise, 0. + */ +static int atapi_qc_may_overflow(struct ata_queued_cmd *qc) +{ + if (qc->tf.protocol != ATA_PROT_ATAPI && + qc->tf.protocol != ATA_PROT_ATAPI_DMA) + return 0; + + if (qc->tf.flags & ATA_TFLAG_WRITE) + return 0; + + switch (qc->cdb[0]) { + case READ_10: + case READ_12: + case WRITE_10: + case WRITE_12: + case GPCMD_READ_CD: + case GPCMD_READ_CD_MSF: + return 0; + } + + return 1; +} + /** * ata_std_qc_defer - Check whether a qc needs to be deferred * @qc: ATA command in question @@ -5139,23 +5177,19 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) * Inherited from caller. * */ - -static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) +static int __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) { int do_write = (qc->tf.flags & ATA_TFLAG_WRITE); - struct scatterlist *sg = qc->__sg; - struct scatterlist *lsg = sg_last(qc->__sg, qc->n_elem); struct ata_port *ap = qc->ap; + struct ata_eh_info *ehi = &qc->dev->link->eh_info; + struct scatterlist *sg; struct page *page; unsigned char *buf; unsigned int offset, count; - int no_more_sg = 0; - - if (qc->curbytes + bytes >= qc->nbytes) - ap->hsm_task_state = HSM_ST_LAST; next_sg: - if (unlikely(no_more_sg)) { + sg = qc->cursg; + if (unlikely(!sg)) { /* * The end of qc->sg is reached and the device expects * more data to transfer. In order not to overrun qc->sg @@ -5164,21 +5198,28 @@ next_sg: * - for write case, padding zero data to the device */ u16 pad_buf[1] = { 0 }; - unsigned int words = bytes >> 1; unsigned int i; - if (words) /* warning if bytes > 1 */ - ata_dev_printk(qc->dev, KERN_WARNING, - "%u bytes trailing data\n", bytes); + if (bytes > qc->curbytes - qc->nbytes + ATAPI_MAX_DRAIN) { + ata_ehi_push_desc(ehi, "too much trailing data " + "buf=%u cur=%u bytes=%u", + qc->nbytes, qc->curbytes, bytes); + return -1; + } + + /* overflow is exptected for misc ATAPI commands */ + if (bytes && !atapi_qc_may_overflow(qc)) + ata_dev_printk(qc->dev, KERN_WARNING, "ATAPI %u bytes " + "trailing data (cdb=%02x nbytes=%u)\n", + bytes, qc->cdb[0], qc->nbytes); - for (i = 0; i < words; i++) + for (i = 0; i < (bytes + 1) / 2; i++) ap->ops->data_xfer(qc->dev, (unsigned char *)pad_buf, 2, do_write); - ap->hsm_task_state = HSM_ST_LAST; - return; - } + qc->curbytes += bytes; - sg = qc->cursg; + return 0; + } page = sg_page(sg); offset = sg->offset + qc->cursg_ofs; @@ -5213,19 +5254,20 @@ next_sg: } bytes -= count; + if ((count & 1) && bytes) + bytes--; qc->curbytes += count; qc->cursg_ofs += count; if (qc->cursg_ofs == sg->length) { - if (qc->cursg == lsg) - no_more_sg = 1; - qc->cursg = sg_next(qc->cursg); qc->cursg_ofs = 0; } if (bytes) goto next_sg; + + return 0; } /** @@ -5268,7 +5310,8 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) VPRINTK("ata%u: xfering %d bytes\n", ap->print_id, bytes); - __atapi_pio_bytes(qc, bytes); + if (__atapi_pio_bytes(qc, bytes)) + goto err_out; ata_altstatus(ap); /* flush */ return; diff --git a/include/linux/libata.h b/include/linux/libata.h index cb91280be9bd..124033cb5e9b 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -119,6 +119,8 @@ enum { ATA_DEF_BUSY_WAIT = 10000, ATA_SHORT_PAUSE = (HZ >> 6) + 1, + ATAPI_MAX_DRAIN = 16 << 10, + ATA_SHT_EMULATED = 1, ATA_SHT_CMD_PER_LUN = 1, ATA_SHT_THIS_ID = -1, -- cgit v1.2.3-59-g8ed1b From 755271358cc401eb3db0db52b2c8fb8d71ae4d8f Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 17 Dec 2007 16:19:44 -0800 Subject: fix headers_install make[3]: *** No rule to make target `/usr/src/devel/include/linux/ticable.h', needed by `/usr/src/devel/usr/include/linux/ticable.h'. Stop. Signed-off-by: Andrew Morton Acked-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- include/linux/Kbuild | 1 - 1 file changed, 1 deletion(-) diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 37bfa19d8064..9abf5a806c15 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -145,7 +145,6 @@ header-y += sound.h header-y += taskstats.h header-y += telephony.h header-y += termios.h -header-y += ticable.h header-y += times.h header-y += tiocl.h header-y += tipc.h -- cgit v1.2.3-59-g8ed1b From 5867a78f41f84e5388448da62c183255dc22601f Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 17 Dec 2007 16:19:45 -0800 Subject: revert "Hibernation: Use temporary page tables for kernel text mapping on x86_64" Revert commit efa4d2fb047b25a6be67fe92178a2a78da6b3f6a ("Hibernation: Use temporary page tables for kernel text mapping on x86_64") because it causes my t61p to reboot right at the end of resume-from-disk. For reasons unknown at this time. Cc: Pavel Machek Cc: Andi Kleen Cc: Thomas Gleixner Cc: Ingo Molnar Acked-by: "Rafael J. Wysocki" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86/kernel/suspend_64.c | 39 ++++++--------------------------------- 1 file changed, 6 insertions(+), 33 deletions(-) diff --git a/arch/x86/kernel/suspend_64.c b/arch/x86/kernel/suspend_64.c index db284ef44d53..2e5efaaf8800 100644 --- a/arch/x86/kernel/suspend_64.c +++ b/arch/x86/kernel/suspend_64.c @@ -192,42 +192,25 @@ static int res_phys_pud_init(pud_t *pud, unsigned long address, unsigned long en return 0; } -static int res_kernel_text_pud_init(pud_t *pud, unsigned long start) -{ - pmd_t *pmd; - unsigned long paddr; - - pmd = (pmd_t *)get_safe_page(GFP_ATOMIC); - if (!pmd) - return -ENOMEM; - set_pud(pud + pud_index(start), __pud(__pa(pmd) | _KERNPG_TABLE)); - for (paddr = 0; paddr < KERNEL_TEXT_SIZE; pmd++, paddr += PMD_SIZE) { - unsigned long pe; - - pe = __PAGE_KERNEL_LARGE_EXEC | _PAGE_GLOBAL | paddr; - pe &= __supported_pte_mask; - set_pmd(pmd, __pmd(pe)); - } - - return 0; -} - static int set_up_temporary_mappings(void) { unsigned long start, end, next; - pud_t *pud; int error; temp_level4_pgt = (pgd_t *)get_safe_page(GFP_ATOMIC); if (!temp_level4_pgt) return -ENOMEM; + /* It is safe to reuse the original kernel mapping */ + set_pgd(temp_level4_pgt + pgd_index(__START_KERNEL_map), + init_level4_pgt[pgd_index(__START_KERNEL_map)]); + /* Set up the direct mapping from scratch */ start = (unsigned long)pfn_to_kaddr(0); end = (unsigned long)pfn_to_kaddr(end_pfn); for (; start < end; start = next) { - pud = (pud_t *)get_safe_page(GFP_ATOMIC); + pud_t *pud = (pud_t *)get_safe_page(GFP_ATOMIC); if (!pud) return -ENOMEM; next = start + PGDIR_SIZE; @@ -238,17 +221,7 @@ static int set_up_temporary_mappings(void) set_pgd(temp_level4_pgt + pgd_index(start), mk_kernel_pgd(__pa(pud))); } - - /* Set up the kernel text mapping from scratch */ - pud = (pud_t *)get_safe_page(GFP_ATOMIC); - if (!pud) - return -ENOMEM; - error = res_kernel_text_pud_init(pud, __START_KERNEL_map); - if (!error) - set_pgd(temp_level4_pgt + pgd_index(__START_KERNEL_map), - __pgd(__pa(pud) | _PAGE_TABLE)); - - return error; + return 0; } int swsusp_arch_resume(void) -- cgit v1.2.3-59-g8ed1b From 4dbed85a35ed37d9608f4f32e5d69efa775d6223 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Mon, 17 Dec 2007 16:19:46 -0800 Subject: uml: stop gdb from deleting breakpoints when running UML Sometimes when UML is debugged gdb miss breakpoints. When process traced by gdb do fork, debugger remove breakpoints from child address space. There is possibility to trace more than one fork, but this not work with UML, I guess (only guess) there is a deadlock - gdb waits for UML and UML waits for gdb. When clone() is called with SIGCHLD and CLONE_VM flags, gdb see this as PTRACE_EVENT_FORK not as PTRACE_EVENT_CLONE and remove breakpoints from child and at the same time from traced process, because either have the same address space. Maybe it is possible to do fix in gdb, but I'm not sure if there is easy way to find out if traced and child processes share memory. So I do fix for UML, it simply do not call clone() with both SIGCHLD and CLONE_VM flags together. Additionally __WALL flag is used for waitpid() to assure not miss clone and normal process events. [ jdike - checkpatch fixes ] Signed-off-by: Stanislaw Gruszka Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/net_user.c | 2 +- arch/um/drivers/slip_user.c | 12 ++-------- arch/um/drivers/slirp_user.c | 15 +++---------- arch/um/drivers/ubd_user.c | 3 +-- arch/um/include/os.h | 2 +- arch/um/os-Linux/aio.c | 4 ++-- arch/um/os-Linux/drivers/ethertap_user.c | 10 ++------- arch/um/os-Linux/drivers/tuntap_user.c | 2 +- arch/um/os-Linux/helper.c | 38 +++++++++++++++++++++++--------- arch/um/os-Linux/process.c | 4 ++-- arch/um/os-Linux/skas/process.c | 12 +++++----- arch/um/os-Linux/util.c | 2 +- 12 files changed, 50 insertions(+), 56 deletions(-) diff --git a/arch/um/drivers/net_user.c b/arch/um/drivers/net_user.c index 90d7f2e8ead8..29185cad9fff 100644 --- a/arch/um/drivers/net_user.c +++ b/arch/um/drivers/net_user.c @@ -201,7 +201,7 @@ static int change_tramp(char **argv, char *output, int output_len) close(fds[1]); if (pid > 0) - CATCH_EINTR(err = waitpid(pid, NULL, 0)); + helper_wait(pid, 0, "change_tramp"); return pid; } diff --git a/arch/um/drivers/slip_user.c b/arch/um/drivers/slip_user.c index 5f06204d6871..b8711e50da80 100644 --- a/arch/um/drivers/slip_user.c +++ b/arch/um/drivers/slip_user.c @@ -77,7 +77,7 @@ static int slip_tramp(char **argv, int fd) { struct slip_pre_exec_data pe_data; char *output; - int status, pid, fds[2], err, output_len; + int pid, fds[2], err, output_len; err = os_pipe(fds, 1, 0); if (err < 0) { @@ -109,15 +109,7 @@ static int slip_tramp(char **argv, int fd) read_output(fds[0], output, output_len); printk("%s", output); - CATCH_EINTR(err = waitpid(pid, &status, 0)); - if (err < 0) - err = errno; - else if (!WIFEXITED(status) || (WEXITSTATUS(status) != 0)) { - printk(UM_KERN_ERR "'%s' didn't exit with status 0\n", argv[0]); - err = -EINVAL; - } - else err = 0; - + err = helper_wait(pid, 0, argv[0]); close(fds[0]); out_free: diff --git a/arch/um/drivers/slirp_user.c b/arch/um/drivers/slirp_user.c index 1865089ff41a..89c1be225fda 100644 --- a/arch/um/drivers/slirp_user.c +++ b/arch/um/drivers/slirp_user.c @@ -79,7 +79,7 @@ out: static void slirp_close(int fd, void *data) { struct slirp_data *pri = data; - int status,err; + int err; close(fd); close(pri->slave); @@ -98,18 +98,9 @@ static void slirp_close(int fd, void *data) "(%d)\n", pri->pid, errno); } #endif - - CATCH_EINTR(err = waitpid(pri->pid, &status, WNOHANG)); - if (err < 0) { - printk(UM_KERN_ERR "slirp_close: waitpid returned %d\n", errno); - return; - } - - if (err == 0) { - printk(UM_KERN_ERR "slirp_close: process %d has not exited\n", - pri->pid); + err = helper_wait(pri->pid, 1, "slirp_close"); + if (err < 0) return; - } pri->pid = -1; } diff --git a/arch/um/drivers/ubd_user.c b/arch/um/drivers/ubd_user.c index 41d254bd38df..48fc7452bc1d 100644 --- a/arch/um/drivers/ubd_user.c +++ b/arch/um/drivers/ubd_user.c @@ -49,8 +49,7 @@ int start_io_thread(unsigned long sp, int *fd_out) goto out_close; } - pid = clone(io_thread, (void *) sp, CLONE_FILES | CLONE_VM | SIGCHLD, - NULL); + pid = clone(io_thread, (void *) sp, CLONE_FILES | CLONE_VM, NULL); if(pid < 0){ err = -errno; printk("start_io_thread - clone failed : errno = %d\n", errno); diff --git a/arch/um/include/os.h b/arch/um/include/os.h index fbf0a87c6eaa..6f0d1c741bca 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -214,7 +214,7 @@ extern int execvp_noalloc(char *buf, const char *file, char *const argv[]); extern int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv); extern int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, unsigned long *stack_out); -extern int helper_wait(int pid); +extern int helper_wait(int pid, int nohang, char *pname); /* tls.c */ diff --git a/arch/um/os-Linux/aio.c b/arch/um/os-Linux/aio.c index 4158118c4a56..93dc0c80ebaf 100644 --- a/arch/um/os-Linux/aio.c +++ b/arch/um/os-Linux/aio.c @@ -218,7 +218,7 @@ static int init_aio_24(void) goto out_close_pipe; err = run_helper_thread(not_aio_thread, NULL, - CLONE_FILES | CLONE_VM | SIGCHLD, &aio_stack); + CLONE_FILES | CLONE_VM, &aio_stack); if (err < 0) goto out_close_pipe; @@ -254,7 +254,7 @@ static int init_aio_26(void) } err = run_helper_thread(aio_thread, NULL, - CLONE_FILES | CLONE_VM | SIGCHLD, &aio_stack); + CLONE_FILES | CLONE_VM, &aio_stack); if (err < 0) return err; diff --git a/arch/um/os-Linux/drivers/ethertap_user.c b/arch/um/os-Linux/drivers/ethertap_user.c index 4ff553603449..07ca0cb472ac 100644 --- a/arch/um/os-Linux/drivers/ethertap_user.c +++ b/arch/um/os-Linux/drivers/ethertap_user.c @@ -94,7 +94,7 @@ static int etap_tramp(char *dev, char *gate, int control_me, int control_remote, int data_me, int data_remote) { struct etap_pre_exec_data pe_data; - int pid, status, err, n; + int pid, err, n; char version_buf[sizeof("nnnnn\0")]; char data_fd_buf[sizeof("nnnnnn\0")]; char gate_buf[sizeof("nnn.nnn.nnn.nnn\0")]; @@ -131,13 +131,7 @@ static int etap_tramp(char *dev, char *gate, int control_me, } if (c != 1) { printk(UM_KERN_ERR "etap_tramp : uml_net failed\n"); - err = -EINVAL; - CATCH_EINTR(n = waitpid(pid, &status, 0)); - if (n < 0) - err = -errno; - else if (!WIFEXITED(status) || (WEXITSTATUS(status) != 1)) - printk(UM_KERN_ERR "uml_net didn't exit with " - "status 1\n"); + err = helper_wait(pid, 0, "uml_net"); } return err; } diff --git a/arch/um/os-Linux/drivers/tuntap_user.c b/arch/um/os-Linux/drivers/tuntap_user.c index 6c55d3c8ead8..1037a3b6386e 100644 --- a/arch/um/os-Linux/drivers/tuntap_user.c +++ b/arch/um/os-Linux/drivers/tuntap_user.c @@ -107,7 +107,7 @@ static int tuntap_open_tramp(char *gate, int *fd_out, int me, int remote, "errno = %d\n", errno); return err; } - CATCH_EINTR(waitpid(pid, NULL, 0)); + helper_wait(pid, 0, "tuntap_open_tramp"); cmsg = CMSG_FIRSTHDR(&msg); if (cmsg == NULL) { diff --git a/arch/um/os-Linux/helper.c b/arch/um/os-Linux/helper.c index 7a72dbb61b0d..fba3f0fefeef 100644 --- a/arch/um/os-Linux/helper.c +++ b/arch/um/os-Linux/helper.c @@ -76,7 +76,7 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv) data.fd = fds[1]; data.buf = __cant_sleep() ? kmalloc(PATH_MAX, UM_GFP_ATOMIC) : kmalloc(PATH_MAX, UM_GFP_KERNEL); - pid = clone(helper_child, (void *) sp, CLONE_VM | SIGCHLD, &data); + pid = clone(helper_child, (void *) sp, CLONE_VM, &data); if (pid < 0) { ret = -errno; printk("run_helper : clone failed, errno = %d\n", errno); @@ -101,7 +101,7 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv) ret = n; kill(pid, SIGKILL); } - CATCH_EINTR(waitpid(pid, NULL, 0)); + CATCH_EINTR(waitpid(pid, NULL, __WCLONE)); } out_free2: @@ -126,7 +126,7 @@ int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, return -ENOMEM; sp = stack + UM_KERN_PAGE_SIZE - sizeof(void *); - pid = clone(proc, (void *) sp, flags | SIGCHLD, arg); + pid = clone(proc, (void *) sp, flags, arg); if (pid < 0) { err = -errno; printk("run_helper_thread : clone failed, errno = %d\n", @@ -134,7 +134,7 @@ int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, return err; } if (stack_out == NULL) { - CATCH_EINTR(pid = waitpid(pid, &status, 0)); + CATCH_EINTR(pid = waitpid(pid, &status, __WCLONE)); if (pid < 0) { err = -errno; printk("run_helper_thread - wait failed, errno = %d\n", @@ -150,14 +150,30 @@ int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, return pid; } -int helper_wait(int pid) +int helper_wait(int pid, int nohang, char *pname) { - int ret; + int ret, status; + int wflags = __WCLONE; - CATCH_EINTR(ret = waitpid(pid, NULL, WNOHANG)); + if (nohang) + wflags |= WNOHANG; + + if (!pname) + pname = "helper_wait"; + + CATCH_EINTR(ret = waitpid(pid, &status, wflags)); if (ret < 0) { - ret = -errno; - printk("helper_wait : waitpid failed, errno = %d\n", errno); - } - return ret; + printk(UM_KERN_ERR "%s : waitpid process %d failed, " + "errno = %d\n", pname, pid, errno); + return -errno; + } else if (nohang && ret == 0) { + printk(UM_KERN_ERR "%s : process %d has not exited\n", + pname, pid); + return -ECHILD; + } else if (!WIFEXITED(status) || WEXITSTATUS(status) != 0) { + printk(UM_KERN_ERR "%s : process %d didn't exit with " + "status 0\n", pname, pid); + return -ECHILD; + } else + return 0; } diff --git a/arch/um/os-Linux/process.c b/arch/um/os-Linux/process.c index 37781db4ceca..bda5c3150d6c 100644 --- a/arch/um/os-Linux/process.c +++ b/arch/um/os-Linux/process.c @@ -101,7 +101,7 @@ void os_kill_process(int pid, int reap_child) { kill(pid, SIGKILL); if (reap_child) - CATCH_EINTR(waitpid(pid, NULL, 0)); + CATCH_EINTR(waitpid(pid, NULL, __WALL)); } /* This is here uniquely to have access to the userspace errno, i.e. the one @@ -130,7 +130,7 @@ void os_kill_ptraced_process(int pid, int reap_child) ptrace(PTRACE_KILL, pid); ptrace(PTRACE_CONT, pid); if (reap_child) - CATCH_EINTR(waitpid(pid, NULL, 0)); + CATCH_EINTR(waitpid(pid, NULL, __WALL)); } /* Don't use the glibc version, which caches the result in TLS. It misses some diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c index d77c81d7068a..e8b7a97e83d3 100644 --- a/arch/um/os-Linux/skas/process.c +++ b/arch/um/os-Linux/skas/process.c @@ -64,7 +64,7 @@ void wait_stub_done(int pid) int n, status, err; while (1) { - CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED)); + CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED | __WALL)); if ((n < 0) || !WIFSTOPPED(status)) goto bad_wait; @@ -153,7 +153,7 @@ static void handle_trap(int pid, struct uml_pt_regs *regs, panic("handle_trap - continuing to end of syscall " "failed, errno = %d\n", errno); - CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED)); + CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED | __WALL)); if ((err < 0) || !WIFSTOPPED(status) || (WSTOPSIG(status) != SIGTRAP + 0x80)) { err = ptrace_dump_regs(pid); @@ -255,16 +255,18 @@ int start_userspace(unsigned long stub_stack) panic("start_userspace : mmap failed, errno = %d", errno); sp = (unsigned long) stack + UM_KERN_PAGE_SIZE - sizeof(void *); - flags = CLONE_FILES | SIGCHLD; + flags = CLONE_FILES; if (proc_mm) flags |= CLONE_VM; + else + flags |= SIGCHLD; pid = clone(userspace_tramp, (void *) sp, flags, (void *) stub_stack); if (pid < 0) panic("start_userspace : clone failed, errno = %d", errno); do { - CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED)); + CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED | __WALL)); if (n < 0) panic("start_userspace : wait failed, errno = %d", errno); @@ -314,7 +316,7 @@ void userspace(struct uml_pt_regs *regs) "pid=%d, ptrace operation = %d, errno = %d\n", pid, op, errno); - CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED)); + CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED | __WALL)); if (err < 0) panic("userspace - waitpid failed, errno = %d\n", errno); diff --git a/arch/um/os-Linux/util.c b/arch/um/os-Linux/util.c index ef095436a78c..3e058ce9ffb6 100644 --- a/arch/um/os-Linux/util.c +++ b/arch/um/os-Linux/util.c @@ -141,7 +141,7 @@ void os_dump_core(void) * nothing reasonable to do if that fails. */ - while ((pid = waitpid(-1, NULL, WNOHANG)) > 0) + while ((pid = waitpid(-1, NULL, WNOHANG | __WALL)) > 0) os_kill_ptraced_process(pid, 0); abort(); -- cgit v1.2.3-59-g8ed1b From fe4304baf26e9580ada52e4579b1b7273434d8dd Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Mon, 17 Dec 2007 16:19:48 -0800 Subject: alpha: strncpy/strncat fixes First of all, thanks to Bob Tracy and Michael Cree for testing. Especially to Bob, as he has done titanic multi-day git-bisect work that finally helped to reproduce and nail down the bug (http://bugzilla.kernel.org/show_bug.cgi?id=9457). [ev6-]stxncpy.S: it's t12, not t2 register that is supposed to contain the last byte offset upon return. As a result of wrong register use (which was my fault back in 2003, IIRC), under some circumstances extra terminating zero bytes were added to destination string. This particularly led to incorrect DEVPATH strings generated in uevent and therefore to udev problems. strncpy.S: unrelated bug I found while testing the above fix - destination is not properly zero-padded then a byte count exceeds source length. Actually this is addition to strncpy fix from last year. Signed-off-by: Ivan Kokshaysky Cc: Richard Henderson Cc: Bob Tracy Cc: Michael Cree Cc: Kay Sievers Cc: "Rafael J. Wysocki" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/alpha/lib/ev6-stxncpy.S | 14 +++++++------- arch/alpha/lib/strncpy.S | 2 +- arch/alpha/lib/stxncpy.S | 14 +++++++------- 3 files changed, 15 insertions(+), 15 deletions(-) diff --git a/arch/alpha/lib/ev6-stxncpy.S b/arch/alpha/lib/ev6-stxncpy.S index b581a7af2456..1aa6e97e04b5 100644 --- a/arch/alpha/lib/ev6-stxncpy.S +++ b/arch/alpha/lib/ev6-stxncpy.S @@ -362,10 +362,10 @@ $unaligned: extql t2, a1, t2 # U : cmpbge zero, t1, t8 # E : is there a zero? - andnot t2, t6, t12 # E : dest mask for a single word copy + andnot t2, t6, t2 # E : dest mask for a single word copy or t8, t10, t5 # E : test for end-of-count too - cmpbge zero, t12, t3 # E : + cmpbge zero, t2, t3 # E : cmoveq a2, t5, t8 # E : Latency=2, extra map slot nop # E : keep with cmoveq andnot t8, t3, t8 # E : (stall) @@ -379,13 +379,13 @@ $unaligned: negq t8, t6 # E : build bitmask of bytes <= zero mskqh t1, t4, t1 # U : - and t6, t8, t2 # E : - subq t2, 1, t6 # E : (stall) - or t6, t2, t8 # E : (stall) - zapnot t12, t8, t12 # U : prepare source word; mirror changes (stall) + and t6, t8, t12 # E : + subq t12, 1, t6 # E : (stall) + or t6, t12, t8 # E : (stall) + zapnot t2, t8, t2 # U : prepare source word; mirror changes (stall) zapnot t1, t8, t1 # U : to source validity mask - andnot t0, t12, t0 # E : zero place for source to reside + andnot t0, t2, t0 # E : zero place for source to reside or t0, t1, t0 # E : and put it there (stall both t0, t1) stq_u t0, 0(a0) # L : (stall) diff --git a/arch/alpha/lib/strncpy.S b/arch/alpha/lib/strncpy.S index bbdef1be5f95..a46f7f3ad8c7 100644 --- a/arch/alpha/lib/strncpy.S +++ b/arch/alpha/lib/strncpy.S @@ -35,7 +35,7 @@ strncpy: or $3, $24, $3 # clear the bits between the last or $4, $27, $4 # written byte and the last byte in COUNT - andnot $4, $3, $4 + andnot $3, $4, $4 zap $1, $4, $1 stq_u $1, 0($16) diff --git a/arch/alpha/lib/stxncpy.S b/arch/alpha/lib/stxncpy.S index da1a72740d29..3dece25283a3 100644 --- a/arch/alpha/lib/stxncpy.S +++ b/arch/alpha/lib/stxncpy.S @@ -315,9 +315,9 @@ $unaligned: extql t2, a1, t2 # e0 : cmpbge zero, t1, t8 # .. e1 : is there a zero? - andnot t2, t6, t12 # e0 : dest mask for a single word copy + andnot t2, t6, t2 # e0 : dest mask for a single word copy or t8, t10, t5 # .. e1 : test for end-of-count too - cmpbge zero, t12, t3 # e0 : + cmpbge zero, t2, t3 # e0 : cmoveq a2, t5, t8 # .. e1 : andnot t8, t3, t8 # e0 : beq t8, $u_head # .. e1 (zdb) @@ -330,14 +330,14 @@ $unaligned: ldq_u t0, 0(a0) # e0 : negq t8, t6 # .. e1 : build bitmask of bytes <= zero mskqh t1, t4, t1 # e0 : - and t6, t8, t2 # .. e1 : - subq t2, 1, t6 # e0 : - or t6, t2, t8 # e1 : + and t6, t8, t12 # .. e1 : + subq t12, 1, t6 # e0 : + or t6, t12, t8 # e1 : - zapnot t12, t8, t12 # e0 : prepare source word; mirror changes + zapnot t2, t8, t2 # e0 : prepare source word; mirror changes zapnot t1, t8, t1 # .. e1 : to source validity mask - andnot t0, t12, t0 # e0 : zero place for source to reside + andnot t0, t2, t0 # e0 : zero place for source to reside or t0, t1, t0 # e1 : and put it there stq_u t0, 0(a0) # e0 : ret (t9) # .. e1 : -- cgit v1.2.3-59-g8ed1b From 8d431dbef4e63d54f1965c3ed6ca5f91ee4512de Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 17 Dec 2007 16:19:50 -0800 Subject: rtc-at32ap700x: fix irq init oops Reorder at32_rtc_probe() so that it's safe (no oopsing) to fire the IRQ handler the instant that it's registered. (Bug noted via "Debug shared IRQ handlers" kernel debug option.) Signed-off-by: David Brownell Cc: Alessandro Zummo Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-at32ap700x.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/rtc/rtc-at32ap700x.c b/drivers/rtc/rtc-at32ap700x.c index 2999214ca534..d3b9b14267ab 100644 --- a/drivers/rtc/rtc-at32ap700x.c +++ b/drivers/rtc/rtc-at32ap700x.c @@ -225,18 +225,12 @@ static int __init at32_rtc_probe(struct platform_device *pdev) goto out; } - ret = request_irq(irq, at32_rtc_interrupt, IRQF_SHARED, "rtc", rtc); - if (ret) { - dev_dbg(&pdev->dev, "could not request irq %d\n", irq); - goto out; - } - rtc->irq = irq; rtc->regs = ioremap(regs->start, regs->end - regs->start + 1); if (!rtc->regs) { ret = -ENOMEM; dev_dbg(&pdev->dev, "could not map I/O memory\n"); - goto out_free_irq; + goto out; } spin_lock_init(&rtc->lock); @@ -253,12 +247,18 @@ static int __init at32_rtc_probe(struct platform_device *pdev) | RTC_BIT(CTRL_EN)); } + ret = request_irq(irq, at32_rtc_interrupt, IRQF_SHARED, "rtc", rtc); + if (ret) { + dev_dbg(&pdev->dev, "could not request irq %d\n", irq); + goto out_iounmap; + } + rtc->rtc = rtc_device_register(pdev->name, &pdev->dev, &at32_rtc_ops, THIS_MODULE); if (IS_ERR(rtc->rtc)) { dev_dbg(&pdev->dev, "could not register rtc device\n"); ret = PTR_ERR(rtc->rtc); - goto out_iounmap; + goto out_free_irq; } platform_set_drvdata(pdev, rtc); @@ -268,10 +268,10 @@ static int __init at32_rtc_probe(struct platform_device *pdev) return 0; -out_iounmap: - iounmap(rtc->regs); out_free_irq: free_irq(irq, rtc); +out_iounmap: + iounmap(rtc->regs); out: kfree(rtc); return ret; -- cgit v1.2.3-59-g8ed1b From 60af880339aae440293a0c8e93178fdcb41f8a29 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 17 Dec 2007 16:19:51 -0800 Subject: parport: "dev->timeslice" is an unsigned long, not an int While auditing proc_doulongvec_ms_jiffies_minmax() usage in kernel, I found a bug in drivers/parport/procfs.c, incorrectly using sizeof(int) instead of sizeof(unsigned long) Only 64bit arches are affected by this old bug. Signed-off-by: Eric Dumazet Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/parport/procfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/parport/procfs.c b/drivers/parport/procfs.c index ed82e41210d1..d950fc34320a 100644 --- a/drivers/parport/procfs.c +++ b/drivers/parport/procfs.c @@ -384,7 +384,7 @@ parport_device_sysctl_template = { { .procname = "timeslice", .data = NULL, - .maxlen = sizeof(int), + .maxlen = sizeof(unsigned long), .mode = 0644, .proc_handler = &proc_doulongvec_ms_jiffies_minmax, .extra1 = (void*) &parport_min_timeslice_value, -- cgit v1.2.3-59-g8ed1b From 459e216429a04779216b61f0fb61938a459fd1ca Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Mon, 17 Dec 2007 16:19:52 -0800 Subject: ecryptfs: initialize new auth_tokens before teardown ecryptfs_destroy_mount_crypt_stat() checks whether each auth_tok->global_auth_tok_key is nonzero and if so puts that key. However, in some early mount error paths nothing has initialized the pointer, and we try to key_put() garbage. Running the bad cipher tests in the testsuite exposes this, and it's happy with the following change. Signed-off-by: Eric Sandeen Cc: Michael Halcrow Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ecryptfs/keystore.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c index 263fed88c0ca..f458c1f35565 100644 --- a/fs/ecryptfs/keystore.c +++ b/fs/ecryptfs/keystore.c @@ -1860,7 +1860,7 @@ ecryptfs_add_global_auth_tok(struct ecryptfs_mount_crypt_stat *mount_crypt_stat, struct ecryptfs_global_auth_tok *new_auth_tok; int rc = 0; - new_auth_tok = kmem_cache_alloc(ecryptfs_global_auth_tok_cache, + new_auth_tok = kmem_cache_zalloc(ecryptfs_global_auth_tok_cache, GFP_KERNEL); if (!new_auth_tok) { rc = -ENOMEM; -- cgit v1.2.3-59-g8ed1b From 2e12a7fb0d79d011ff9e0b09b53ca4438e5604de Mon Sep 17 00:00:00 2001 From: Sheela Date: Mon, 17 Dec 2007 16:19:53 -0800 Subject: Fix lguest documentation Share net is not supported, Rusty is an "idiot" . Signed-off-by: Sheela Sequeira Reviewed-by: James Morris Acked-by: Rusty Russell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/lguest/lguest.txt | 4 ---- 1 file changed, 4 deletions(-) diff --git a/Documentation/lguest/lguest.txt b/Documentation/lguest/lguest.txt index 7885ab2d5f53..722d4e7fbebe 100644 --- a/Documentation/lguest/lguest.txt +++ b/Documentation/lguest/lguest.txt @@ -109,10 +109,6 @@ Running Lguest: See http://linux-net.osdl.org/index.php/Bridge for general information on how to get bridging working. -- You can also create an inter-guest network using - "--sharenet=": any two guests using the same file are on - the same network. This file is created if it does not exist. - There is a helpful mailing list at http://ozlabs.org/mailman/listinfo/lguest Good luck! -- cgit v1.2.3-59-g8ed1b From a5ee6daa525c04079baee6f393c0b2dab3f61253 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Mon, 17 Dec 2007 16:19:53 -0800 Subject: sparsemem: make SPARSEMEM_VMEMMAP selectable MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit SPARSEMEM_VMEMMAP needs to be a selectable config option to support building the kernel both with and without sparsemem vmemmap support. This selection is desirable for platforms which could be configured one way for platform specific builds and the other for multi-platform builds. Signed-off-by: Miguel Botón Signed-off-by: Geoff Levand Acked-by: Yasunori Goto Cc: Christoph Lameter Cc: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/Kconfig | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/mm/Kconfig b/mm/Kconfig index c070ec0c15bf..9ef97417a0b9 100644 --- a/mm/Kconfig +++ b/mm/Kconfig @@ -112,18 +112,17 @@ config SPARSEMEM_EXTREME def_bool y depends on SPARSEMEM && !SPARSEMEM_STATIC -# -# SPARSEMEM_VMEMMAP uses a virtually mapped mem_map to optimise pfn_to_page -# and page_to_pfn. The most efficient option where kernel virtual space is -# not under pressure. -# config SPARSEMEM_VMEMMAP_ENABLE def_bool n config SPARSEMEM_VMEMMAP - bool - depends on SPARSEMEM - default y if (SPARSEMEM_VMEMMAP_ENABLE) + bool "Sparse Memory virtual memmap" + depends on SPARSEMEM && SPARSEMEM_VMEMMAP_ENABLE + default y + help + SPARSEMEM_VMEMMAP uses a virtually mapped memmap to optimise + pfn_to_page and page_to_pfn operations. This is the most + efficient option when sufficient kernel resources are available. # eventually, we can have this option just 'select SPARSEMEM' config MEMORY_HOTPLUG -- cgit v1.2.3-59-g8ed1b From 9e2de407bec98fb07040f658f55fb71ba1b594f5 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Mon, 17 Dec 2007 16:19:54 -0800 Subject: fs/Kconfig: grammar fix MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This was introduced in 4af8e944c22d8af92a7548354a9567250cc1a782 Signed-off-by: Uwe Kleine-König Cc: David Woodhouse Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/Kconfig b/fs/Kconfig index 635f3e286ad8..487236c65837 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -1305,7 +1305,7 @@ config JFFS2_COMPRESSION_OPTIONS help Enabling this option allows you to explicitly choose which compression modules, if any, are enabled in JFFS2. Removing - compressors and mean you cannot read existing file systems, + compressors can mean you cannot read existing file systems, and enabling experimental compressors can mean that you write a file system which cannot be read by a standard kernel. -- cgit v1.2.3-59-g8ed1b From b47b6f38e5202c924bfe7632dce5dda4e3d40731 Mon Sep 17 00:00:00 2001 From: "Andries E. Brouwer" Date: Mon, 17 Dec 2007 16:19:55 -0800 Subject: ext3, ext4: avoid divide by zero As it turns out, the kernel divides by EXT3_INODES_PER_GROUP(s) when mounting an ext3 filesystem. If that number is zero, a crash follows. Below a patch. This crash was reported by Joeri de Ruiter, Carst Tankink and Pim Vullers. Cc: Acked-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ext3/super.c | 2 +- fs/ext4/super.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ext3/super.c b/fs/ext3/super.c index de55da9e28ba..cb14de1502c3 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -1676,7 +1676,7 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent) sbi->s_blocks_per_group = le32_to_cpu(es->s_blocks_per_group); sbi->s_frags_per_group = le32_to_cpu(es->s_frags_per_group); sbi->s_inodes_per_group = le32_to_cpu(es->s_inodes_per_group); - if (EXT3_INODE_SIZE(sb) == 0) + if (EXT3_INODE_SIZE(sb) == 0 || EXT3_INODES_PER_GROUP(sb) == 0) goto cantfind_ext3; sbi->s_inodes_per_block = blocksize / EXT3_INODE_SIZE(sb); if (sbi->s_inodes_per_block == 0) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 8031dc0e24e5..1ca0f546c466 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1797,7 +1797,7 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) sbi->s_desc_size = EXT4_MIN_DESC_SIZE; sbi->s_blocks_per_group = le32_to_cpu(es->s_blocks_per_group); sbi->s_inodes_per_group = le32_to_cpu(es->s_inodes_per_group); - if (EXT4_INODE_SIZE(sb) == 0) + if (EXT4_INODE_SIZE(sb) == 0 || EXT4_INODES_PER_GROUP(sb) == 0) goto cantfind_ext4; sbi->s_inodes_per_block = blocksize / EXT4_INODE_SIZE(sb); if (sbi->s_inodes_per_block == 0) -- cgit v1.2.3-59-g8ed1b From 9548b209a37397f3036aa5bd3d5b4d3b725aa11a Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Mon, 17 Dec 2007 16:19:57 -0800 Subject: alpha: build fixes This fixes some of the alpha-specific build problems, except a) modpost warning about COMMON symbol "saved_config" and b) nasty final link failure with gcc-4.x, -Os and scsi-disk driver configured built-in (due to jump table in .rodata referencing discarded .exit.text). - build failure with gcc-4.2.x: fix up casts in cia_io* routines to avoid warnings ('discards qualifiers from pointer target type'), which are failures, thanks to -Werror; - modpost warnings: add missing __init qualifier for titan and marvel; for non-generic build, move machine vectors from .data to .data.init.refok section; - unbreak CPU-specific optimization: rearrange cpuflags-y assignments so that extended -mcpu value (ev56, pca56, ev67) overrides basic one (ev5, ev6) and not vice versa. Signed-off-by: Ivan Kokshaysky Cc: Richard Henderson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/alpha/Makefile | 10 +++++----- arch/alpha/kernel/err_ev7.c | 2 +- arch/alpha/kernel/err_marvel.c | 2 +- arch/alpha/kernel/err_titan.c | 2 +- arch/alpha/kernel/machvec_impl.h | 2 +- include/asm-alpha/io_trivial.h | 12 ++++++++---- 6 files changed, 17 insertions(+), 13 deletions(-) diff --git a/arch/alpha/Makefile b/arch/alpha/Makefile index 63104ebd1806..4e1a8e2c4541 100644 --- a/arch/alpha/Makefile +++ b/arch/alpha/Makefile @@ -14,13 +14,13 @@ LDFLAGS_vmlinux := -static -N #-relax CHECKFLAGS += -D__alpha__ -m64 cflags-y := -pipe -mno-fp-regs -ffixed-8 -msmall-data -cpuflags-$(CONFIG_ALPHA_EV67) := -mcpu=ev67 -cpuflags-$(CONFIG_ALPHA_EV6) := -mcpu=ev6 +cpuflags-$(CONFIG_ALPHA_EV4) := -mcpu=ev4 +cpuflags-$(CONFIG_ALPHA_EV5) := -mcpu=ev5 +cpuflags-$(CONFIG_ALPHA_EV56) := -mcpu=ev56 cpuflags-$(CONFIG_ALPHA_POLARIS) := -mcpu=pca56 cpuflags-$(CONFIG_ALPHA_SX164) := -mcpu=pca56 -cpuflags-$(CONFIG_ALPHA_EV56) := -mcpu=ev56 -cpuflags-$(CONFIG_ALPHA_EV5) := -mcpu=ev5 -cpuflags-$(CONFIG_ALPHA_EV4) := -mcpu=ev4 +cpuflags-$(CONFIG_ALPHA_EV6) := -mcpu=ev6 +cpuflags-$(CONFIG_ALPHA_EV67) := -mcpu=ev67 # If GENERIC, make sure to turn off any instruction set extensions that # the host compiler might have on by default. Given that EV4 and EV5 # have the same instruction set, prefer EV5 because an EV5 schedule is diff --git a/arch/alpha/kernel/err_ev7.c b/arch/alpha/kernel/err_ev7.c index bc799f72d8c1..68cd493f54c5 100644 --- a/arch/alpha/kernel/err_ev7.c +++ b/arch/alpha/kernel/err_ev7.c @@ -273,7 +273,7 @@ ev7_process_pal_subpacket(struct el_subpacket *header) struct el_subpacket_handler ev7_pal_subpacket_handler = SUBPACKET_HANDLER_INIT(EL_CLASS__PAL, ev7_process_pal_subpacket); -void +void __init ev7_register_error_handlers(void) { int i; diff --git a/arch/alpha/kernel/err_marvel.c b/arch/alpha/kernel/err_marvel.c index 497877bf2012..413bf37eb094 100644 --- a/arch/alpha/kernel/err_marvel.c +++ b/arch/alpha/kernel/err_marvel.c @@ -1152,7 +1152,7 @@ marvel_machine_check(u64 vector, u64 la_ptr) mb(); } -void +void __init marvel_register_error_handlers(void) { ev7_register_error_handlers(); diff --git a/arch/alpha/kernel/err_titan.c b/arch/alpha/kernel/err_titan.c index 6f3867877d9e..257449ed15ef 100644 --- a/arch/alpha/kernel/err_titan.c +++ b/arch/alpha/kernel/err_titan.c @@ -564,7 +564,7 @@ static struct el_subpacket_handler titan_subpacket_handler = SUBPACKET_HANDLER_INIT(EL_CLASS__REGATTA_FAMILY, el_process_regatta_subpacket); -void +void __init titan_register_error_handlers(void) { size_t i; diff --git a/arch/alpha/kernel/machvec_impl.h b/arch/alpha/kernel/machvec_impl.h index 0caa45aa128d..466c9dff8181 100644 --- a/arch/alpha/kernel/machvec_impl.h +++ b/arch/alpha/kernel/machvec_impl.h @@ -134,7 +134,7 @@ #define __initmv __initdata #define ALIAS_MV(x) #else -#define __initmv +#define __initmv __initdata_refok /* GCC actually has a syntax for defining aliases, but is under some delusion that you shouldn't be able to declare it extern somewhere diff --git a/include/asm-alpha/io_trivial.h b/include/asm-alpha/io_trivial.h index b10d1aa4cdd1..1c77f10b4b36 100644 --- a/include/asm-alpha/io_trivial.h +++ b/include/asm-alpha/io_trivial.h @@ -72,25 +72,29 @@ IO_CONCAT(__IO_PREFIX,writew)(u16 b, volatile void __iomem *a) __EXTERN_INLINE u8 IO_CONCAT(__IO_PREFIX,readb)(const volatile void __iomem *a) { - return IO_CONCAT(__IO_PREFIX,ioread8)((void __iomem *)a); + void __iomem *addr = (void __iomem *)a; + return IO_CONCAT(__IO_PREFIX,ioread8)(addr); } __EXTERN_INLINE u16 IO_CONCAT(__IO_PREFIX,readw)(const volatile void __iomem *a) { - return IO_CONCAT(__IO_PREFIX,ioread16)((void __iomem *)a); + void __iomem *addr = (void __iomem *)a; + return IO_CONCAT(__IO_PREFIX,ioread16)(addr); } __EXTERN_INLINE void IO_CONCAT(__IO_PREFIX,writeb)(u8 b, volatile void __iomem *a) { - IO_CONCAT(__IO_PREFIX,iowrite8)(b, (void __iomem *)a); + void __iomem *addr = (void __iomem *)a; + IO_CONCAT(__IO_PREFIX,iowrite8)(b, addr); } __EXTERN_INLINE void IO_CONCAT(__IO_PREFIX,writew)(u16 b, volatile void __iomem *a) { - IO_CONCAT(__IO_PREFIX,iowrite16)(b, (void __iomem *)a); + void __iomem *addr = (void __iomem *)a; + IO_CONCAT(__IO_PREFIX,iowrite16)(b, addr); } #endif -- cgit v1.2.3-59-g8ed1b From bd6cba53c524dccf72900435d29722b22f61d835 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Mon, 17 Dec 2007 16:19:58 -0800 Subject: cpufreq: fix missing unlocks in cpufreq_add_dev error paths. Ingo hit some BUG_ONs that were probably caused by these missing unlocks causing an unbalance. He couldn't reproduce the bug reliably, so it's unknown that it's definitly fixing the problem he hit, but it's a fairly good chance, and this fixes an obvious bug. [ Dave: "Ingo followed up that he hit some lockdep related output with this applied, so it may not be right. I'll look at it after xmas if no-one has it figured out before then." Akpm: "It looks pretty correct to me though." ] Signed-off-by: Dave Jones Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/cpufreq/cpufreq.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 5e626b12b97e..79581fab82d6 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -841,19 +841,25 @@ static int cpufreq_add_dev (struct sys_device * sys_dev) drv_attr = cpufreq_driver->attr; while ((drv_attr) && (*drv_attr)) { ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr)); - if (ret) + if (ret) { + unlock_policy_rwsem_write(cpu); goto err_out_driver_exit; + } drv_attr++; } if (cpufreq_driver->get){ ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr); - if (ret) + if (ret) { + unlock_policy_rwsem_write(cpu); goto err_out_driver_exit; + } } if (cpufreq_driver->target){ ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr); - if (ret) + if (ret) { + unlock_policy_rwsem_write(cpu); goto err_out_driver_exit; + } } spin_lock_irqsave(&cpufreq_driver_lock, flags); -- cgit v1.2.3-59-g8ed1b From af0cd5a7c3cded50c25e98acd94912d17a0eb914 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Mon, 17 Dec 2007 16:19:58 -0800 Subject: mm/sparse.c: check the return value of sparse_index_alloc() Since sparse_index_alloc() can return NULL on memory allocation failure, we must deal with the failure condition when calling it. Signed-off-by: WANG Cong Cc: Christoph Lameter Cc: Rik van Riel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/sparse.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/mm/sparse.c b/mm/sparse.c index e06f514fe04f..d245e59048a8 100644 --- a/mm/sparse.c +++ b/mm/sparse.c @@ -83,6 +83,8 @@ static int __meminit sparse_index_init(unsigned long section_nr, int nid) return -EEXIST; section = sparse_index_alloc(nid); + if (!section) + return -ENOMEM; /* * This lock keeps two different sections from * reallocating for the same index -- cgit v1.2.3-59-g8ed1b From bbd0682596f7a434467ee551fee18d5f0b818539 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Mon, 17 Dec 2007 16:19:59 -0800 Subject: mm/sparse.c: improve the error handling for sparse_add_one_section() Improve the error handling for mm/sparse.c::sparse_add_one_section(). And I see no reason to check 'usemap' until holding the 'pgdat_resize_lock'. [geoffrey.levand@am.sony.com: sparse_index_init() returns -EEXIST] Cc: Christoph Lameter Acked-by: Dave Hansen Cc: Rik van Riel Acked-by: Yasunori Goto Cc: Andy Whitcroft Signed-off-by: WANG Cong Signed-off-by: Geoff Levand Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/sparse.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/mm/sparse.c b/mm/sparse.c index d245e59048a8..a2183cb5d524 100644 --- a/mm/sparse.c +++ b/mm/sparse.c @@ -391,9 +391,17 @@ int sparse_add_one_section(struct zone *zone, unsigned long start_pfn, * no locking for this, because it does its own * plus, it does a kmalloc */ - sparse_index_init(section_nr, pgdat->node_id); + ret = sparse_index_init(section_nr, pgdat->node_id); + if (ret < 0 && ret != -EEXIST) + return ret; memmap = kmalloc_section_memmap(section_nr, pgdat->node_id, nr_pages); + if (!memmap) + return -ENOMEM; usemap = __kmalloc_section_usemap(); + if (!usemap) { + __kfree_section_memmap(memmap, nr_pages); + return -ENOMEM; + } pgdat_resize_lock(pgdat, &flags); @@ -403,18 +411,16 @@ int sparse_add_one_section(struct zone *zone, unsigned long start_pfn, goto out; } - if (!usemap) { - ret = -ENOMEM; - goto out; - } ms->section_mem_map |= SECTION_MARKED_PRESENT; ret = sparse_init_one_section(ms, section_nr, memmap, usemap); out: pgdat_resize_unlock(pgdat, &flags); - if (ret <= 0) + if (ret <= 0) { + kfree(usemap); __kfree_section_memmap(memmap, nr_pages); + } return ret; } #endif -- cgit v1.2.3-59-g8ed1b From d17a18dd92c91c784fcf7c785fa6bbf178fd0a6d Mon Sep 17 00:00:00 2001 From: Dave Young Date: Mon, 17 Dec 2007 16:20:00 -0800 Subject: pktcdvd: add kobject_put when kobject register fails In kobject_register, the kobject reference is get in kobject_init, and then kobject_add. If kobject_add fail, it will only cleanup the reference got by itself. Signed-off-by: Dave Young Reviewed-by: Pekka Enberg Cc: Greg KH Cc: Peter Osterlund Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/pktcdvd.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index a5ee21319d37..3535ef896677 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -117,8 +117,10 @@ static struct pktcdvd_kobj* pkt_kobj_create(struct pktcdvd_device *pd, p->kobj.parent = parent; p->kobj.ktype = ktype; p->pd = pd; - if (kobject_register(&p->kobj) != 0) + if (kobject_register(&p->kobj) != 0) { + kobject_put(&p->kobj); return NULL; + } return p; } /* -- cgit v1.2.3-59-g8ed1b From 771cceb464874d4a22efd4a600e4597ad3f2fc9e Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 17 Dec 2007 16:20:02 -0800 Subject: drivers/macintosh/via-pmu.c: Added a missing iounmap The error handling code should undo the ioremap as well. The problem was detected using the following semantic match (http://www.emn.fr/x-info/coccinelle/) // @@ type T,T1,T2; identifier E; statement S; expression x1,x2; constant C; int ret; @@ T E; ... * E = ioremap(...); if (E == NULL) S ... when != iounmap(E) when != if (E != NULL) { ... iounmap(E); ...} when != x1 = (T1)E if (...) { ... when != iounmap(E) when != if (E != NULL) { ... iounmap(E); ...} when != x2 = (T2)E ( * return; | * return C; | * return ret; ) } // Signed-off-by: Julia Lawall Cc: Johannes Berg Cc: Olaf Hering Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/macintosh/via-pmu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index dc741d3a4531..6123c70153d3 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -2336,6 +2336,7 @@ powerbook_sleep_3400(void) ret = pmac_suspend_devices(); if (ret) { pbook_free_pci_save(); + iounmap(mem_ctrl); printk(KERN_ERR "Sleep rejected by devices\n"); return ret; } -- cgit v1.2.3-59-g8ed1b From a33234735b2bcfb23cf1facb1f0d8656b8edab8f Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 17 Dec 2007 16:20:03 -0800 Subject: drivers/cpufreq/cpufreq_stats.c section fix cpufreq_stats_free_table() mustn't be __cpuexit since it's called by the __cpuinit cpufreq_stat_cpu_callback(). This patch fixes the following section mismatch reported by Chris Clayton: WARNING: vmlinux.o(.init.text+0x143dd): Section mismatch: reference to .exit.text:cpufreq_stats_free_table (between 'cpufreq_stat_cpu_callback' and 'cpufreq_stats_init') Signed-off-by: Adrian Bunk Cc: Chris Clayton Acked-by: Dave Jones Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/cpufreq/cpufreq_stats.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c index 8a45d0f93e26..1b8312b02006 100644 --- a/drivers/cpufreq/cpufreq_stats.c +++ b/drivers/cpufreq/cpufreq_stats.c @@ -164,7 +164,7 @@ freq_table_get_index(struct cpufreq_stats *stat, unsigned int freq) return -1; } -static void __cpuexit cpufreq_stats_free_table(unsigned int cpu) +static void cpufreq_stats_free_table(unsigned int cpu) { struct cpufreq_stats *stat = cpufreq_stats_table[cpu]; struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); -- cgit v1.2.3-59-g8ed1b From 8d936626dd00bd47cf574add458fea8a23b79611 Mon Sep 17 00:00:00 2001 From: Adam Jackson Date: Mon, 17 Dec 2007 16:20:04 -0800 Subject: apm_event{,info}_t are userspace types These types define the size of data read from /dev/apm_bios. They should not be hidden behind #ifdef __KERNEL__. This is killing my xserver compile, apm_event_t is used in the xserver source. Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/apm_bios.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/linux/apm_bios.h b/include/linux/apm_bios.h index 9754baa14921..01a6244c9bc9 100644 --- a/include/linux/apm_bios.h +++ b/include/linux/apm_bios.h @@ -18,6 +18,9 @@ #include +typedef unsigned short apm_event_t; +typedef unsigned short apm_eventinfo_t; + struct apm_bios_info { __u16 version; __u16 cseg; @@ -32,9 +35,6 @@ struct apm_bios_info { #ifdef __KERNEL__ -typedef unsigned short apm_event_t; -typedef unsigned short apm_eventinfo_t; - #define APM_CS (GDT_ENTRY_APMBIOS_BASE * 8) #define APM_CS_16 (APM_CS + 8) #define APM_DS (APM_CS_16 + 8) -- cgit v1.2.3-59-g8ed1b From 81eabcbe0b991ddef5216f30ae91c4b226d54b6d Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Mon, 17 Dec 2007 16:20:05 -0800 Subject: mm: fix page allocation for larger I/O segments In some cases the IO subsystem is able to merge requests if the pages are adjacent in physical memory. This was achieved in the allocator by having expand() return pages in physically contiguous order in situations were a large buddy was split. However, list-based anti-fragmentation changed the order pages were returned in to avoid searching in buffered_rmqueue() for a page of the appropriate migrate type. This patch restores behaviour of rmqueue_bulk() preserving the physical order of pages returned by the allocator without incurring increased search costs for anti-fragmentation. Signed-off-by: Mel Gorman Cc: James Bottomley Cc: Jens Axboe Cc: Mark Lord Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index b5a58d476c1a..d73bfad1c32f 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -847,8 +847,19 @@ static int rmqueue_bulk(struct zone *zone, unsigned int order, struct page *page = __rmqueue(zone, order, migratetype); if (unlikely(page == NULL)) break; + + /* + * Split buddy pages returned by expand() are received here + * in physical page order. The page is added to the callers and + * list and the list head then moves forward. From the callers + * perspective, the linked list is ordered by page number in + * some conditions. This is useful for IO devices that can + * merge IO requests if the physical pages are ordered + * properly. + */ list_add(&page->lru, list); set_page_private(page, migratetype); + list = &page->lru; } spin_unlock(&zone->lock); return i; -- cgit v1.2.3-59-g8ed1b From 7c9e70efbfc3186674d93451e0fbf18365347b4d Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Mon, 17 Dec 2007 16:20:07 -0800 Subject: ecryptfs: set s_blocksize from lower fs in sb eCryptfs wasn't setting s_blocksize in it's superblock; just pick it up from the lower FS. Having an s_blocksize of 0 made things like "filefrag" which call FIGETBSZ unhappy. Signed-off-by: Eric Sandeen Acked-by: Mike Halcrow Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ecryptfs/main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c index b83a512b7e08..a277754da171 100644 --- a/fs/ecryptfs/main.c +++ b/fs/ecryptfs/main.c @@ -523,6 +523,7 @@ static int ecryptfs_read_super(struct super_block *sb, const char *dev_name) lower_mnt = nd.mnt; ecryptfs_set_superblock_lower(sb, lower_root->d_sb); sb->s_maxbytes = lower_root->d_sb->s_maxbytes; + sb->s_blocksize = lower_root->d_sb->s_blocksize; ecryptfs_set_dentry_lower(sb->s_root, lower_root); ecryptfs_set_dentry_lower_mnt(sb->s_root, lower_mnt); rc = ecryptfs_interpose(lower_root, sb->s_root, sb, 0); -- cgit v1.2.3-59-g8ed1b From 711924b1052a280bd2452c3babb9816e4a77c723 Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Mon, 17 Dec 2007 16:20:08 -0800 Subject: I/OAT: fixups from code comments A few fixups from Andrew's code comments. - removed "static inline" forward-declares - changed use of min() to min_t() - removed some unnecessary NULL initializations - removed a couple of BUG() calls Fixes this: drivers/dma/ioat_dma.c: In function `ioat1_tx_submit': drivers/dma/ioat_dma.c:177: sorry, unimplemented: inlining failed in call to '__ioat1_dma_memcpy_issue_pending': function body not available drivers/dma/ioat_dma.c:268: sorry, unimplemented: called from here Signed-off-by: Shannon Nelson Cc: "Williams, Dan J" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/dma/ioat_dma.c | 142 +++++++++++++++++++++++++++---------------------- drivers/dma/ioatdma.h | 2 +- 2 files changed, 78 insertions(+), 66 deletions(-) diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c index c1c2dcc6fc2e..c17ec3276062 100644 --- a/drivers/dma/ioat_dma.c +++ b/drivers/dma/ioat_dma.c @@ -173,10 +173,47 @@ static void ioat_set_dest(dma_addr_t addr, tx_to_ioat_desc(tx)->dst = addr; } +/** + * ioat_dma_memcpy_issue_pending - push potentially unrecognized appended + * descriptors to hw + * @chan: DMA channel handle + */ static inline void __ioat1_dma_memcpy_issue_pending( - struct ioat_dma_chan *ioat_chan); + struct ioat_dma_chan *ioat_chan) +{ + ioat_chan->pending = 0; + writeb(IOAT_CHANCMD_APPEND, ioat_chan->reg_base + IOAT1_CHANCMD_OFFSET); +} + +static void ioat1_dma_memcpy_issue_pending(struct dma_chan *chan) +{ + struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan); + + if (ioat_chan->pending != 0) { + spin_lock_bh(&ioat_chan->desc_lock); + __ioat1_dma_memcpy_issue_pending(ioat_chan); + spin_unlock_bh(&ioat_chan->desc_lock); + } +} + static inline void __ioat2_dma_memcpy_issue_pending( - struct ioat_dma_chan *ioat_chan); + struct ioat_dma_chan *ioat_chan) +{ + ioat_chan->pending = 0; + writew(ioat_chan->dmacount, + ioat_chan->reg_base + IOAT_CHAN_DMACOUNT_OFFSET); +} + +static void ioat2_dma_memcpy_issue_pending(struct dma_chan *chan) +{ + struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan); + + if (ioat_chan->pending != 0) { + spin_lock_bh(&ioat_chan->desc_lock); + __ioat2_dma_memcpy_issue_pending(ioat_chan); + spin_unlock_bh(&ioat_chan->desc_lock); + } +} static dma_cookie_t ioat1_tx_submit(struct dma_async_tx_descriptor *tx) { @@ -203,7 +240,7 @@ static dma_cookie_t ioat1_tx_submit(struct dma_async_tx_descriptor *tx) prev = to_ioat_desc(ioat_chan->used_desc.prev); prefetch(prev->hw); do { - copy = min((u32) len, ioat_chan->xfercap); + copy = min_t(size_t, len, ioat_chan->xfercap); new->async_tx.ack = 1; @@ -291,10 +328,12 @@ static dma_cookie_t ioat2_tx_submit(struct dma_async_tx_descriptor *tx) orig_ack = first->async_tx.ack; new = first; - /* ioat_chan->desc_lock is still in force in version 2 path */ - + /* + * ioat_chan->desc_lock is still in force in version 2 path + * it gets unlocked at end of this function + */ do { - copy = min((u32) len, ioat_chan->xfercap); + copy = min_t(size_t, len, ioat_chan->xfercap); new->async_tx.ack = 1; @@ -432,7 +471,7 @@ static void ioat2_dma_massage_chan_desc(struct ioat_dma_chan *ioat_chan) static int ioat_dma_alloc_chan_resources(struct dma_chan *chan) { struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan); - struct ioat_desc_sw *desc = NULL; + struct ioat_desc_sw *desc; u16 chanctrl; u32 chanerr; int i; @@ -575,7 +614,7 @@ static void ioat_dma_free_chan_resources(struct dma_chan *chan) static struct ioat_desc_sw * ioat1_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan) { - struct ioat_desc_sw *new = NULL; + struct ioat_desc_sw *new; if (!list_empty(&ioat_chan->free_desc)) { new = to_ioat_desc(ioat_chan->free_desc.next); @@ -583,9 +622,11 @@ ioat1_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan) } else { /* try to get another desc */ new = ioat_dma_alloc_descriptor(ioat_chan, GFP_ATOMIC); - /* will this ever happen? */ - /* TODO add upper limit on these */ - BUG_ON(!new); + if (!new) { + dev_err(&ioat_chan->device->pdev->dev, + "alloc failed\n"); + return NULL; + } } prefetch(new->hw); @@ -595,7 +636,7 @@ ioat1_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan) static struct ioat_desc_sw * ioat2_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan) { - struct ioat_desc_sw *new = NULL; + struct ioat_desc_sw *new; /* * used.prev points to where to start processing @@ -609,8 +650,8 @@ ioat2_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan) if (ioat_chan->used_desc.prev && ioat_chan->used_desc.next == ioat_chan->used_desc.prev->prev) { - struct ioat_desc_sw *desc = NULL; - struct ioat_desc_sw *noop_desc = NULL; + struct ioat_desc_sw *desc; + struct ioat_desc_sw *noop_desc; int i; /* set up the noop descriptor */ @@ -624,10 +665,14 @@ ioat2_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan) ioat_chan->pending++; ioat_chan->dmacount++; - /* get a few more descriptors */ + /* try to get a few more descriptors */ for (i = 16; i; i--) { desc = ioat_dma_alloc_descriptor(ioat_chan, GFP_ATOMIC); - BUG_ON(!desc); + if (!desc) { + dev_err(&ioat_chan->device->pdev->dev, + "alloc failed\n"); + break; + } list_add_tail(&desc->node, ioat_chan->used_desc.next); desc->hw->next @@ -677,10 +722,13 @@ static struct dma_async_tx_descriptor *ioat1_dma_prep_memcpy( spin_lock_bh(&ioat_chan->desc_lock); new = ioat_dma_get_next_descriptor(ioat_chan); - new->len = len; spin_unlock_bh(&ioat_chan->desc_lock); - return new ? &new->async_tx : NULL; + if (new) { + new->len = len; + return &new->async_tx; + } else + return NULL; } static struct dma_async_tx_descriptor *ioat2_dma_prep_memcpy( @@ -693,53 +741,17 @@ static struct dma_async_tx_descriptor *ioat2_dma_prep_memcpy( spin_lock_bh(&ioat_chan->desc_lock); new = ioat2_dma_get_next_descriptor(ioat_chan); - new->len = len; - - /* leave ioat_chan->desc_lock set in version 2 path */ - return new ? &new->async_tx : NULL; -} - - -/** - * ioat_dma_memcpy_issue_pending - push potentially unrecognized appended - * descriptors to hw - * @chan: DMA channel handle - */ -static inline void __ioat1_dma_memcpy_issue_pending( - struct ioat_dma_chan *ioat_chan) -{ - ioat_chan->pending = 0; - writeb(IOAT_CHANCMD_APPEND, ioat_chan->reg_base + IOAT1_CHANCMD_OFFSET); -} - -static void ioat1_dma_memcpy_issue_pending(struct dma_chan *chan) -{ - struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan); - - if (ioat_chan->pending != 0) { - spin_lock_bh(&ioat_chan->desc_lock); - __ioat1_dma_memcpy_issue_pending(ioat_chan); - spin_unlock_bh(&ioat_chan->desc_lock); - } -} - -static inline void __ioat2_dma_memcpy_issue_pending( - struct ioat_dma_chan *ioat_chan) -{ - ioat_chan->pending = 0; - writew(ioat_chan->dmacount, - ioat_chan->reg_base + IOAT_CHAN_DMACOUNT_OFFSET); -} -static void ioat2_dma_memcpy_issue_pending(struct dma_chan *chan) -{ - struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan); + /* + * leave ioat_chan->desc_lock set in ioat 2 path + * it will get unlocked at end of tx_submit + */ - if (ioat_chan->pending != 0) { - spin_lock_bh(&ioat_chan->desc_lock); - __ioat2_dma_memcpy_issue_pending(ioat_chan); - spin_unlock_bh(&ioat_chan->desc_lock); - } + if (new) { + new->len = len; + return &new->async_tx; + } else + return NULL; } static void ioat_dma_cleanup_tasklet(unsigned long data) @@ -1019,7 +1031,7 @@ static void ioat_dma_start_null_desc(struct ioat_dma_chan *ioat_chan) static void ioat_dma_test_callback(void *dma_async_param) { printk(KERN_ERR "ioatdma: ioat_dma_test_callback(%p)\n", - dma_async_param); + dma_async_param); } /** @@ -1032,7 +1044,7 @@ static int ioat_dma_self_test(struct ioatdma_device *device) u8 *src; u8 *dest; struct dma_chan *dma_chan; - struct dma_async_tx_descriptor *tx = NULL; + struct dma_async_tx_descriptor *tx; dma_addr_t addr; dma_cookie_t cookie; int err = 0; diff --git a/drivers/dma/ioatdma.h b/drivers/dma/ioatdma.h index b668234ef654..f2c7fedbf009 100644 --- a/drivers/dma/ioatdma.h +++ b/drivers/dma/ioatdma.h @@ -76,7 +76,7 @@ struct ioat_dma_chan { dma_cookie_t completed_cookie; unsigned long last_completion; - u32 xfercap; /* XFERCAP register value expanded out */ + size_t xfercap; /* XFERCAP register value expanded out */ spinlock_t cleanup_lock; spinlock_t desc_lock; -- cgit v1.2.3-59-g8ed1b From bb8e8bcce7eceacb52eb0a3ebb64202ad6bcc438 Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Mon, 17 Dec 2007 16:20:08 -0800 Subject: I/OAT: fix null device in call to dev_err() We can't use the device in a dev_err() after a kzalloc failure or after the kfree, so simplify it to the pdev that was originally passed in. Cc: Eric Sesterhenn Signed-off-by: Shannon Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/dma/ioat_dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c index c17ec3276062..45e7b4666c7b 100644 --- a/drivers/dma/ioat_dma.c +++ b/drivers/dma/ioat_dma.c @@ -1363,7 +1363,7 @@ err_completion_pool: err_dma_pool: kfree(device); err_kzalloc: - dev_err(&device->pdev->dev, + dev_err(&pdev->dev, "Intel(R) I/OAT DMA Engine initialization failed\n"); return NULL; } -- cgit v1.2.3-59-g8ed1b From 8998979cc1f90da5a48b2e8a13833217c63f7c4a Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Mon, 17 Dec 2007 16:20:09 -0800 Subject: fix bloat-o-meter for ppc64 bloat-o-meter assumes that a '.' anywhere in a symbol's name means that it is static and prepends 'static.' to the first part of the symbol name, discarding the portion of the name that follows the '.'. However, the names of function entry points begin with '.' in the ppc64 ABI. This causes all function text size changes to be accounted to a single 'static.' entry in the output when comparing ppc64 kernels. Change getsizes() to ignore the first character of the symbol name when searching for '.'. Signed-off-by: Nathan Lynch Cc: Matt Mackall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/bloat-o-meter | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/scripts/bloat-o-meter b/scripts/bloat-o-meter index ce59fc2d8de4..6501a50e17f0 100755 --- a/scripts/bloat-o-meter +++ b/scripts/bloat-o-meter @@ -18,7 +18,8 @@ def getsizes(file): for l in os.popen("nm --size-sort " + file).readlines(): size, type, name = l[:-1].split() if type in "tTdDbB": - if "." in name: name = "static." + name.split(".")[0] + # function names begin with '.' on 64-bit powerpc + if "." in name[1:]: name = "static." + name.split(".")[0] sym[name] = sym.get(name, 0) + int(size, 16) return sym -- cgit v1.2.3-59-g8ed1b From 7a3f595cc8298df14a7c71b0d876bafd8e9e1cbf Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Mon, 17 Dec 2007 16:20:10 -0800 Subject: ecryptfs: fix fsx data corruption problems ecryptfs in 2.6.24-rc3 wasn't surviving fsx for me at all, dying after 4 ops. Generally, encountering problems with stale data and improperly zeroed pages. An extending truncate + write for example would expose stale data. With the changes below I got to a million ops and beyond with all mmap ops disabled - mmap still needs work. (A version of this patch on a RHEL5 kernel ran for over 110 million fsx ops) I added a few comments as well, to the best of my understanding as I read through the code. Signed-off-by: Eric Sandeen Acked-by: Michael Halcrow Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ecryptfs/mmap.c | 31 ++++++++++++++++++++----------- fs/ecryptfs/read_write.c | 27 +++++++++++++++++++++------ 2 files changed, 41 insertions(+), 17 deletions(-) diff --git a/fs/ecryptfs/mmap.c b/fs/ecryptfs/mmap.c index 16a7a555f392..32c5711d79a3 100644 --- a/fs/ecryptfs/mmap.c +++ b/fs/ecryptfs/mmap.c @@ -263,14 +263,13 @@ out: return 0; } +/* This function must zero any hole we create */ static int ecryptfs_prepare_write(struct file *file, struct page *page, unsigned from, unsigned to) { int rc = 0; + loff_t prev_page_end_size; - if (from == 0 && to == PAGE_CACHE_SIZE) - goto out; /* If we are writing a full page, it will be - up to date. */ if (!PageUptodate(page)) { rc = ecryptfs_read_lower_page_segment(page, page->index, 0, PAGE_CACHE_SIZE, @@ -283,22 +282,32 @@ static int ecryptfs_prepare_write(struct file *file, struct page *page, } else SetPageUptodate(page); } - if (page->index != 0) { - loff_t end_of_prev_pg_pos = - (((loff_t)page->index << PAGE_CACHE_SHIFT) - 1); - if (end_of_prev_pg_pos > i_size_read(page->mapping->host)) { + prev_page_end_size = ((loff_t)page->index << PAGE_CACHE_SHIFT); + + /* + * If creating a page or more of holes, zero them out via truncate. + * Note, this will increase i_size. + */ + if (page->index != 0) { + if (prev_page_end_size > i_size_read(page->mapping->host)) { rc = ecryptfs_truncate(file->f_path.dentry, - end_of_prev_pg_pos); + prev_page_end_size); if (rc) { printk(KERN_ERR "Error on attempt to " "truncate to (higher) offset [%lld];" - " rc = [%d]\n", end_of_prev_pg_pos, rc); + " rc = [%d]\n", prev_page_end_size, rc); goto out; } } - if (end_of_prev_pg_pos + 1 > i_size_read(page->mapping->host)) - zero_user_page(page, 0, PAGE_CACHE_SIZE, KM_USER0); + } + /* + * Writing to a new page, and creating a small hole from start of page? + * Zero it out. + */ + if ((i_size_read(page->mapping->host) == prev_page_end_size) && + (from != 0)) { + zero_user_page(page, 0, PAGE_CACHE_SIZE, KM_USER0); } out: return rc; diff --git a/fs/ecryptfs/read_write.c b/fs/ecryptfs/read_write.c index 6b7474a4336a..948f57624c05 100644 --- a/fs/ecryptfs/read_write.c +++ b/fs/ecryptfs/read_write.c @@ -124,6 +124,10 @@ int ecryptfs_write(struct file *ecryptfs_file, char *data, loff_t offset, loff_t pos; int rc = 0; + /* + * if we are writing beyond current size, then start pos + * at the current size - we'll fill in zeros from there. + */ if (offset > ecryptfs_file_size) pos = ecryptfs_file_size; else @@ -137,6 +141,7 @@ int ecryptfs_write(struct file *ecryptfs_file, char *data, loff_t offset, if (num_bytes > total_remaining_bytes) num_bytes = total_remaining_bytes; if (pos < offset) { + /* remaining zeros to write, up to destination offset */ size_t total_remaining_zeros = (offset - pos); if (num_bytes > total_remaining_zeros) @@ -167,17 +172,27 @@ int ecryptfs_write(struct file *ecryptfs_file, char *data, loff_t offset, } } ecryptfs_page_virt = kmap_atomic(ecryptfs_page, KM_USER0); + + /* + * pos: where we're now writing, offset: where the request was + * If current pos is before request, we are filling zeros + * If we are at or beyond request, we are writing the *data* + * If we're in a fresh page beyond eof, zero it in either case + */ + if (pos < offset || !start_offset_in_page) { + /* We are extending past the previous end of the file. + * Fill in zero values to the end of the page */ + memset(((char *)ecryptfs_page_virt + + start_offset_in_page), 0, + PAGE_CACHE_SIZE - start_offset_in_page); + } + + /* pos >= offset, we are now writing the data request */ if (pos >= offset) { memcpy(((char *)ecryptfs_page_virt + start_offset_in_page), (data + data_offset), num_bytes); data_offset += num_bytes; - } else { - /* We are extending past the previous end of the file. - * Fill in zero values up to the start of where we - * will be writing data. */ - memset(((char *)ecryptfs_page_virt - + start_offset_in_page), 0, num_bytes); } kunmap_atomic(ecryptfs_page_virt, KM_USER0); flush_dcache_page(ecryptfs_page); -- cgit v1.2.3-59-g8ed1b From d1c3fb1f8f29c41b0d098d7cfb3c32939043631f Mon Sep 17 00:00:00 2001 From: Nishanth Aravamudan Date: Mon, 17 Dec 2007 16:20:12 -0800 Subject: hugetlb: introduce nr_overcommit_hugepages sysctl hugetlb: introduce nr_overcommit_hugepages sysctl While examining the code to support /proc/sys/vm/hugetlb_dynamic_pool, I became convinced that having a boolean sysctl was insufficient: 1) To support per-node control of hugepages, I have previously submitted patches to add a sysfs attribute related to nr_hugepages. However, with a boolean global value and per-mount quota enforcement constraining the dynamic pool, adding corresponding control of the dynamic pool on a per-node basis seems inconsistent to me. 2) Administration of the hugetlb dynamic pool with multiple hugetlbfs mount points is, arguably, more arduous than it needs to be. Each quota would need to be set separately, and the sum would need to be monitored. To ease the administration, and to help make the way for per-node control of the static & dynamic hugepage pool, I added a separate sysctl, nr_overcommit_hugepages. This value serves as a high watermark for the overall hugepage pool, while nr_hugepages serves as a low watermark. The boolean sysctl can then be removed, as the condition nr_overcommit_hugepages > 0 indicates the same administrative setting as hugetlb_dynamic_pool == 1 Quotas still serve as local enforcement of the size of the pool on a per-mount basis. A few caveats: 1) There is a race whereby the global surplus huge page counter is incremented before a hugepage has allocated. Another process could then try grow the pool, and fail to convert a surplus huge page to a normal huge page and instead allocate a fresh huge page. I believe this is benign, as no memory is leaked (the actual pages are still tracked correctly) and the counters won't go out of sync. 2) Shrinking the static pool while a surplus is in effect will allow the number of surplus huge pages to exceed the overcommit value. As long as this condition holds, however, no more surplus huge pages will be allowed on the system until one of the two sysctls are increased sufficiently, or the surplus huge pages go out of use and are freed. Successfully tested on x86_64 with the current libhugetlbfs snapshot, modified to use the new sysctl. Signed-off-by: Nishanth Aravamudan Acked-by: Adam Litke Cc: William Lee Irwin III Cc: Dave Hansen Cc: David Gibson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/hugetlb.h | 1 + kernel/sysctl.c | 8 ++++++ mm/hugetlb.c | 67 ++++++++++++++++++++++++++++++++++++++++++++----- 3 files changed, 70 insertions(+), 6 deletions(-) diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index 24968790bc3e..f7bc869a29b8 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -34,6 +34,7 @@ void hugetlb_unreserve_pages(struct inode *inode, long offset, long freed); extern unsigned long max_huge_pages; extern unsigned long hugepages_treat_as_movable; extern int hugetlb_dynamic_pool; +extern unsigned long nr_overcommit_huge_pages; extern const unsigned long hugetlb_zero, hugetlb_infinity; extern int sysctl_hugetlb_shm_group; diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 8ac51714b08c..b85a1282605d 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -912,6 +912,14 @@ static struct ctl_table vm_table[] = { .mode = 0644, .proc_handler = &proc_dointvec, }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "nr_overcommit_hugepages", + .data = &nr_overcommit_huge_pages, + .maxlen = sizeof(nr_overcommit_huge_pages), + .mode = 0644, + .proc_handler = &proc_doulongvec_minmax, + }, #endif { .ctl_name = VM_LOWMEM_RESERVE_RATIO, diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 6f978218c2c8..3a790651475a 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -32,6 +32,7 @@ static unsigned int surplus_huge_pages_node[MAX_NUMNODES]; static gfp_t htlb_alloc_mask = GFP_HIGHUSER; unsigned long hugepages_treat_as_movable; int hugetlb_dynamic_pool; +unsigned long nr_overcommit_huge_pages; static int hugetlb_next_nid; /* @@ -227,22 +228,62 @@ static struct page *alloc_buddy_huge_page(struct vm_area_struct *vma, unsigned long address) { struct page *page; + unsigned int nid; /* Check if the dynamic pool is enabled */ if (!hugetlb_dynamic_pool) return NULL; + /* + * Assume we will successfully allocate the surplus page to + * prevent racing processes from causing the surplus to exceed + * overcommit + * + * This however introduces a different race, where a process B + * tries to grow the static hugepage pool while alloc_pages() is + * called by process A. B will only examine the per-node + * counters in determining if surplus huge pages can be + * converted to normal huge pages in adjust_pool_surplus(). A + * won't be able to increment the per-node counter, until the + * lock is dropped by B, but B doesn't drop hugetlb_lock until + * no more huge pages can be converted from surplus to normal + * state (and doesn't try to convert again). Thus, we have a + * case where a surplus huge page exists, the pool is grown, and + * the surplus huge page still exists after, even though it + * should just have been converted to a normal huge page. This + * does not leak memory, though, as the hugepage will be freed + * once it is out of use. It also does not allow the counters to + * go out of whack in adjust_pool_surplus() as we don't modify + * the node values until we've gotten the hugepage and only the + * per-node value is checked there. + */ + spin_lock(&hugetlb_lock); + if (surplus_huge_pages >= nr_overcommit_huge_pages) { + spin_unlock(&hugetlb_lock); + return NULL; + } else { + nr_huge_pages++; + surplus_huge_pages++; + } + spin_unlock(&hugetlb_lock); + page = alloc_pages(htlb_alloc_mask|__GFP_COMP|__GFP_NOWARN, HUGETLB_PAGE_ORDER); + + spin_lock(&hugetlb_lock); if (page) { + nid = page_to_nid(page); set_compound_page_dtor(page, free_huge_page); - spin_lock(&hugetlb_lock); - nr_huge_pages++; - nr_huge_pages_node[page_to_nid(page)]++; - surplus_huge_pages++; - surplus_huge_pages_node[page_to_nid(page)]++; - spin_unlock(&hugetlb_lock); + /* + * We incremented the global counters already + */ + nr_huge_pages_node[nid]++; + surplus_huge_pages_node[nid]++; + } else { + nr_huge_pages--; + surplus_huge_pages--; } + spin_unlock(&hugetlb_lock); return page; } @@ -481,6 +522,12 @@ static unsigned long set_max_huge_pages(unsigned long count) * Increase the pool size * First take pages out of surplus state. Then make up the * remaining difference by allocating fresh huge pages. + * + * We might race with alloc_buddy_huge_page() here and be unable + * to convert a surplus huge page to a normal huge page. That is + * not critical, though, it just means the overall size of the + * pool might be one hugepage larger than it needs to be, but + * within all the constraints specified by the sysctls. */ spin_lock(&hugetlb_lock); while (surplus_huge_pages && count > persistent_huge_pages) { @@ -509,6 +556,14 @@ static unsigned long set_max_huge_pages(unsigned long count) * to keep enough around to satisfy reservations). Then place * pages into surplus state as needed so the pool will shrink * to the desired size as pages become free. + * + * By placing pages into the surplus state independent of the + * overcommit value, we are allowing the surplus pool size to + * exceed overcommit. There are few sane options here. Since + * alloc_buddy_huge_page() is checking the global counter, + * though, we'll note that we're not allowed to exceed surplus + * and won't grow the pool anywhere else. Not until one of the + * sysctls are changed, or the surplus pages go out of use. */ min_count = resv_huge_pages + nr_huge_pages - free_huge_pages; min_count = max(count, min_count); -- cgit v1.2.3-59-g8ed1b From 368d2c6358c3c62b3820a8a73f9fe9c8b540cdea Mon Sep 17 00:00:00 2001 From: Nishanth Aravamudan Date: Mon, 17 Dec 2007 16:20:22 -0800 Subject: Revert "hugetlb: Add hugetlb_dynamic_pool sysctl" This reverts commit 54f9f80d6543fb7b157d3b11e2e7911dc1379790 ("hugetlb: Add hugetlb_dynamic_pool sysctl") Given the new sysctl nr_overcommit_hugepages, the boolean dynamic pool sysctl is not needed, as its semantics can be expressed by 0 in the overcommit sysctl (no dynamic pool) and non-0 in the overcommit sysctl (pool enabled). (Needed in 2.6.24 since it reverts a post-2.6.23 userspace-visible change) Signed-off-by: Nishanth Aravamudan Acked-by: Adam Litke Cc: William Lee Irwin III Cc: Dave Hansen Cc: David Gibson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/hugetlb.h | 1 - kernel/sysctl.c | 8 -------- mm/hugetlb.c | 5 ----- 3 files changed, 14 deletions(-) diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index f7bc869a29b8..30d606afcafe 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -33,7 +33,6 @@ void hugetlb_unreserve_pages(struct inode *inode, long offset, long freed); extern unsigned long max_huge_pages; extern unsigned long hugepages_treat_as_movable; -extern int hugetlb_dynamic_pool; extern unsigned long nr_overcommit_huge_pages; extern const unsigned long hugetlb_zero, hugetlb_infinity; extern int sysctl_hugetlb_shm_group; diff --git a/kernel/sysctl.c b/kernel/sysctl.c index b85a1282605d..1135de730872 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -904,14 +904,6 @@ static struct ctl_table vm_table[] = { .mode = 0644, .proc_handler = &hugetlb_treat_movable_handler, }, - { - .ctl_name = CTL_UNNUMBERED, - .procname = "hugetlb_dynamic_pool", - .data = &hugetlb_dynamic_pool, - .maxlen = sizeof(hugetlb_dynamic_pool), - .mode = 0644, - .proc_handler = &proc_dointvec, - }, { .ctl_name = CTL_UNNUMBERED, .procname = "nr_overcommit_hugepages", diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 3a790651475a..7224a4f07106 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -31,7 +31,6 @@ static unsigned int free_huge_pages_node[MAX_NUMNODES]; static unsigned int surplus_huge_pages_node[MAX_NUMNODES]; static gfp_t htlb_alloc_mask = GFP_HIGHUSER; unsigned long hugepages_treat_as_movable; -int hugetlb_dynamic_pool; unsigned long nr_overcommit_huge_pages; static int hugetlb_next_nid; @@ -230,10 +229,6 @@ static struct page *alloc_buddy_huge_page(struct vm_area_struct *vma, struct page *page; unsigned int nid; - /* Check if the dynamic pool is enabled */ - if (!hugetlb_dynamic_pool) - return NULL; - /* * Assume we will successfully allocate the surplus page to * prevent racing processes from causing the surplus to exceed -- cgit v1.2.3-59-g8ed1b From d5dbac87b4343d98ae509fb787efb77f8ddc484b Mon Sep 17 00:00:00 2001 From: Nishanth Aravamudan Date: Mon, 17 Dec 2007 16:20:25 -0800 Subject: Documentation: update hugetlb information The hugetlb documentation has gotten a bit out of sync with the current code. Updated the sysctl file to refer to Documentation/vm/hugetlbpage.txt. Update that file to contain the current state of affairs (with the newer named sysctl in place). Signed-off-by: Nishanth Aravamudan Acked-by: Adam Litke Cc: William Lee Irwin III Cc: Dave Hansen Cc: David Gibson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/sysctl/vm.txt | 19 +++++++++++++++++++ Documentation/vm/hugetlbpage.txt | 35 +++++++++++++++++++++++++++++------ 2 files changed, 48 insertions(+), 6 deletions(-) diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index b89570c30434..6f31f0a247d0 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -34,6 +34,8 @@ Currently, these files are in /proc/sys/vm: - oom_kill_allocating_task - mmap_min_address - numa_zonelist_order +- nr_hugepages +- nr_overcommit_hugepages ============================================================== @@ -305,3 +307,20 @@ will select "node" order in following case. Otherwise, "zone" order will be selected. Default order is recommended unless this is causing problems for your system/application. + +============================================================== + +nr_hugepages + +Change the minimum size of the hugepage pool. + +See Documentation/vm/hugetlbpage.txt + +============================================================== + +nr_overcommit_hugepages + +Change the maximum size of the hugepage pool. The maximum is +nr_hugepages + nr_overcommit_hugepages. + +See Documentation/vm/hugetlbpage.txt diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt index 51ccc48aa763..f962d01bea2a 100644 --- a/Documentation/vm/hugetlbpage.txt +++ b/Documentation/vm/hugetlbpage.txt @@ -30,9 +30,10 @@ alignment and size of the arguments to the above system calls. The output of "cat /proc/meminfo" will have lines like: ..... -HugePages_Total: xxx -HugePages_Free: yyy -HugePages_Rsvd: www +HugePages_Total: vvv +HugePages_Free: www +HugePages_Rsvd: xxx +HugePages_Surp: yyy Hugepagesize: zzz kB where: @@ -42,6 +43,10 @@ allocated. HugePages_Rsvd is short for "reserved," and is the number of hugepages for which a commitment to allocate from the pool has been made, but no allocation has yet been made. It's vaguely analogous to overcommit. +HugePages_Surp is short for "surplus," and is the number of hugepages in +the pool above the value in /proc/sys/vm/nr_hugepages. The maximum +number of surplus hugepages is controlled by +/proc/sys/vm/nr_overcommit_hugepages. /proc/filesystems should also show a filesystem of type "hugetlbfs" configured in the kernel. @@ -71,7 +76,25 @@ or failure of allocation depends on the amount of physically contiguous memory that is preset in system at this time. System administrators may want to put this command in one of the local rc init files. This will enable the kernel to request huge pages early in the boot process (when the possibility -of getting physical contiguous pages is still very high). +of getting physical contiguous pages is still very high). In either +case, adminstrators will want to verify the number of hugepages actually +allocated by checking the sysctl or meminfo. + +/proc/sys/vm/nr_overcommit_hugepages indicates how large the pool of +hugepages can grow, if more hugepages than /proc/sys/vm/nr_hugepages are +requested by applications. echo'ing any non-zero value into this file +indicates that the hugetlb subsystem is allowed to try to obtain +hugepages from the buddy allocator, if the normal pool is exhausted. As +these surplus hugepages go out of use, they are freed back to the buddy +allocator. + +Caveat: Shrinking the pool via nr_hugepages while a surplus is in effect +will allow the number of surplus huge pages to exceed the overcommit +value, as the pool hugepages (which must have been in use for a surplus +hugepages to be allocated) will become surplus hugepages. As long as +this condition holds, however, no more surplus huge pages will be +allowed on the system until one of the two sysctls are increased +sufficiently, or the surplus huge pages go out of use and are freed. If the user applications are going to request hugepages using mmap system call, then it is required that system administrator mount a file system of @@ -94,8 +117,8 @@ provided on command line then no limits are set. For size and nr_inodes options, you can use [G|g]/[M|m]/[K|k] to represent giga/mega/kilo. For example, size=2K has the same meaning as size=2048. -read and write system calls are not supported on files that reside on hugetlb -file systems. +While read system calls are supported on files that reside on hugetlb +file systems, write system calls are not. Regular chown, chgrp, and chmod commands (with right permissions) could be used to change the file attributes on hugetlbfs. -- cgit v1.2.3-59-g8ed1b From 087ee8d5bec1aa6d0a1dfe3067c7298375462ceb Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 17 Dec 2007 16:20:26 -0800 Subject: Fix compilation warning in dquot.c Fix compilation warning about discarded const. Signed-off-by: Jan Kara Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/dquot.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/dquot.c b/fs/dquot.c index 2809768d9c41..686ab63a7c6c 100644 --- a/fs/dquot.c +++ b/fs/dquot.c @@ -965,7 +965,7 @@ err_out: } #endif -static inline void flush_warnings(struct dquot **dquots, char *warntype) +static inline void flush_warnings(struct dquot * const *dquots, char *warntype) { int i; @@ -1216,7 +1216,7 @@ warn_put_all: for (cnt = 0; cnt < MAXQUOTAS; cnt++) if (inode->i_dquot[cnt]) mark_dquot_dirty(inode->i_dquot[cnt]); - flush_warnings((struct dquot **)inode->i_dquot, warntype); + flush_warnings(inode->i_dquot, warntype); up_read(&sb_dqopt(inode->i_sb)->dqptr_sem); return ret; } -- cgit v1.2.3-59-g8ed1b From 3811dbf67162bd08412f1b0e02e554f353e93bdb Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Mon, 17 Dec 2007 16:20:27 -0800 Subject: SLUB: remove useless masking of GFP_ZERO Remove a recently added useless masking of GFP_ZERO. GFP_ZERO is already masked out in new_slab() (See how it calls allocate_slab). No need to do it twice. This reverts the SLUB parts of 7fd272550bd43cc1d7289ef0ab2fa50de137e767. Cc: Matt Mackall Reviewed-by: Pekka Enberg Signed-off-by: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/slub.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/mm/slub.c b/mm/slub.c index 9c1d9f3b364f..b9f37cb0f2e6 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -1468,9 +1468,6 @@ static void *__slab_alloc(struct kmem_cache *s, void **object; struct page *new; - /* We handle __GFP_ZERO in the caller */ - gfpflags &= ~__GFP_ZERO; - if (!c->page) goto new_slab; -- cgit v1.2.3-59-g8ed1b From 421d99193537a6522aac2148286f08792167d5fd Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Mon, 17 Dec 2007 16:20:27 -0800 Subject: quicklist: Set tlb->need_flush if pages are remaining in quicklist 0 This ensures that the quicklists are drained. Otherwise draining may only occur when the processor reaches an idle state. Fixes fatal leakage of pgd_t's on 2.6.22 and later. Signed-off-by: Christoph Lameter Reported-by: Dhaval Giani Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-generic/tlb.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h index f490e43a90b9..799307eea40f 100644 --- a/include/asm-generic/tlb.h +++ b/include/asm-generic/tlb.h @@ -14,6 +14,7 @@ #define _ASM_GENERIC__TLB_H #include +#include #include #include @@ -85,6 +86,9 @@ tlb_flush_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) static inline void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) { +#ifdef CONFIG_QUICKLIST + tlb->need_flush += &__get_cpu_var(quicklist)[0].nr_pages != 0; +#endif tlb_flush_mmu(tlb, start, end); /* keep the page table cache within bounds */ -- cgit v1.2.3-59-g8ed1b From 64396accc2831fcbdc7d793edc25481a5ebc75b2 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Mon, 17 Dec 2007 16:20:28 -0800 Subject: sysctl: fix ax25 checks Fix: sysctl table check failed: /net/ax25/ax0/ax25_default_mode .3.9.1.2 Unknown sysctl binary path Pid: 2936, comm: kissattach Not tainted 2.6.24-rc5 #1 [] set_fail+0x3b/0x43 [] sysctl_check_table+0x408/0x456 [] sysctl_check_table+0x41c/0x456 [] sysctl_check_table+0x41c/0x456 ... Signed-off-by: Eric W. Biederman Cc: Bernard Pidoux Cc: "David S. Miller" Cc: "Rafael J. Wysocki" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/sysctl_check.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/kernel/sysctl_check.c b/kernel/sysctl_check.c index bed939f82c31..a68425a5cc1d 100644 --- a/kernel/sysctl_check.c +++ b/kernel/sysctl_check.c @@ -428,7 +428,7 @@ static struct trans_ctl_table trans_net_netrom_table[] = { {} }; -static struct trans_ctl_table trans_net_ax25_table[] = { +static struct trans_ctl_table trans_net_ax25_param_table[] = { { NET_AX25_IP_DEFAULT_MODE, "ip_default_mode" }, { NET_AX25_DEFAULT_MODE, "ax25_default_mode" }, { NET_AX25_BACKOFF_TYPE, "backoff_type" }, @@ -446,6 +446,11 @@ static struct trans_ctl_table trans_net_ax25_table[] = { {} }; +static struct trans_ctl_table trans_net_ax25_table[] = { + { 0, NULL, trans_net_ax25_param_table }, + {} +}; + static struct trans_ctl_table trans_net_bridge_table[] = { { NET_BRIDGE_NF_CALL_ARPTABLES, "bridge-nf-call-arptables" }, { NET_BRIDGE_NF_CALL_IPTABLES, "bridge-nf-call-iptables" }, -- cgit v1.2.3-59-g8ed1b From c734c79bc397eace039bea406997efa89f879c14 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Tue, 18 Dec 2007 16:17:41 +1100 Subject: [XFS] Don't wait for pending I/Os when purging blocks beyond eof. On last close of a file we purge blocks beyond eof. The same code is used when we truncate the file size down. In this case we need to wait for any pending I/Os for dirty pages beyond the new eof. For the last close case we are not changing the file size and therefore do not need to wait for any I/Os to complete. This fixes a performance bottleneck where writes into the page cache and cache flushes can become mutually exclusive. SGI-PV: 964002 SGI-Modid: xfs-linux-melb:xfs-kern:30220a Signed-off-by: Lachlan McIlroy Signed-off-by: Peter Leckie --- fs/xfs/xfs_inode.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index abf509a88915..344948082819 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -1459,8 +1459,10 @@ xfs_itruncate_start( mp = ip->i_mount; vp = XFS_ITOV(ip); - vn_iowait(ip); /* wait for the completion of any pending DIOs */ - + /* wait for the completion of any pending DIOs */ + if (new_size < ip->i_size) + vn_iowait(ip); + /* * Call toss_pages or flushinval_pages to get rid of pages * overlapping the region being removed. We have to use -- cgit v1.2.3-59-g8ed1b From 041388b54ed95cd169546bd83bacd08ee32bd7ea Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Tue, 18 Dec 2007 16:19:34 +1100 Subject: [XFS] Put the correct offset in dirent d_off The recent filldir regression fix was not putting the correct d_off in each dirent. This was resulting in incorrect cookies being passed to dmapi ioctls and the wrong offset appearing in the dirents. readdir was unaffected as the filp->f_pos was being updated with the correct offset and this was being written into the last dirent in each buffer. Fix the XFS code to do the right thing. SGI-PV: 973746 SGI-Modid: xfs-linux-melb:xfs-kern:30240a Signed-off-by: David Chinner Signed-off-by: Christoph Hellwig Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_file.c | 4 ++-- fs/xfs/xfs_dir2_block.c | 6 ++---- fs/xfs/xfs_dir2_leaf.c | 2 +- fs/xfs/xfs_dir2_sf.c | 9 +++------ 4 files changed, 8 insertions(+), 13 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c index 54c564693d93..e1fcef2eb928 100644 --- a/fs/xfs/linux-2.6/xfs_file.c +++ b/fs/xfs/linux-2.6/xfs_file.c @@ -356,13 +356,13 @@ xfs_file_readdir( reclen = sizeof(struct hack_dirent) + de->namlen; size -= reclen; - curr_offset = de->offset /* & 0x7fffffff */; de = (struct hack_dirent *)((char *)de + reclen); + curr_offset = de->offset /* & 0x7fffffff */; } } done: - if (!error) { + if (!error) { if (size == 0) filp->f_pos = offset & 0x7fffffff; else if (de) diff --git a/fs/xfs/xfs_dir2_block.c b/fs/xfs/xfs_dir2_block.c index c171767e242a..a5f4f4fb8868 100644 --- a/fs/xfs/xfs_dir2_block.c +++ b/fs/xfs/xfs_dir2_block.c @@ -508,7 +508,7 @@ xfs_dir2_block_getdents( continue; cook = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk, - ptr - (char *)block); + (char *)dep - (char *)block); ino = be64_to_cpu(dep->inumber); #if XFS_BIG_INUMS ino += mp->m_inoadd; @@ -519,9 +519,7 @@ xfs_dir2_block_getdents( */ if (filldir(dirent, dep->name, dep->namelen, cook, ino, DT_UNKNOWN)) { - *offset = xfs_dir2_db_off_to_dataptr(mp, - mp->m_dirdatablk, - (char *)dep - (char *)block); + *offset = cook; xfs_da_brelse(NULL, bp); return 0; } diff --git a/fs/xfs/xfs_dir2_leaf.c b/fs/xfs/xfs_dir2_leaf.c index e7c12fa1303e..0ca0020ba09f 100644 --- a/fs/xfs/xfs_dir2_leaf.c +++ b/fs/xfs/xfs_dir2_leaf.c @@ -1091,7 +1091,7 @@ xfs_dir2_leaf_getdents( * Won't fit. Return to caller. */ if (filldir(dirent, dep->name, dep->namelen, - xfs_dir2_byte_to_dataptr(mp, curoff + length), + xfs_dir2_byte_to_dataptr(mp, curoff), ino, DT_UNKNOWN)) break; diff --git a/fs/xfs/xfs_dir2_sf.c b/fs/xfs/xfs_dir2_sf.c index 182c70315ad1..919d275a1cef 100644 --- a/fs/xfs/xfs_dir2_sf.c +++ b/fs/xfs/xfs_dir2_sf.c @@ -752,7 +752,7 @@ xfs_dir2_sf_getdents( #if XFS_BIG_INUMS ino += mp->m_inoadd; #endif - if (filldir(dirent, ".", 1, dotdot_offset, ino, DT_DIR)) { + if (filldir(dirent, ".", 1, dot_offset, ino, DT_DIR)) { *offset = dot_offset; return 0; } @@ -762,13 +762,11 @@ xfs_dir2_sf_getdents( * Put .. entry unless we're starting past it. */ if (*offset <= dotdot_offset) { - off = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk, - XFS_DIR2_DATA_FIRST_OFFSET); ino = xfs_dir2_sf_get_inumber(sfp, &sfp->hdr.parent); #if XFS_BIG_INUMS ino += mp->m_inoadd; #endif - if (filldir(dirent, "..", 2, off, ino, DT_DIR)) { + if (filldir(dirent, "..", 2, dotdot_offset, ino, DT_DIR)) { *offset = dotdot_offset; return 0; } @@ -793,8 +791,7 @@ xfs_dir2_sf_getdents( #endif if (filldir(dirent, sfep->name, sfep->namelen, - off + xfs_dir2_data_entsize(sfep->namelen), - ino, DT_UNKNOWN)) { + off, ino, DT_UNKNOWN)) { *offset = off; return 0; } -- cgit v1.2.3-59-g8ed1b From 24bb8fb99a062213424d3e88842eb07f693378be Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 5 Dec 2007 21:28:24 +0100 Subject: block: use jiffies conversion functions in scsi_ioctl.c Use msecs_to_jiffies() and jiffies_to_msecs() in scsi_ioctl(). Sometimes callers use very large values for e.g. vendor specific media clear command and calculation can overflow. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- block/scsi_ioctl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c index 91c73224f4c6..9675b34638d4 100644 --- a/block/scsi_ioctl.c +++ b/block/scsi_ioctl.c @@ -230,7 +230,7 @@ static int blk_fill_sghdr_rq(struct request_queue *q, struct request *rq, rq->cmd_len = hdr->cmd_len; rq->cmd_type = REQ_TYPE_BLOCK_PC; - rq->timeout = (hdr->timeout * HZ) / 1000; + rq->timeout = msecs_to_jiffies(hdr->timeout); if (!rq->timeout) rq->timeout = q->sg_timeout; if (!rq->timeout) @@ -366,7 +366,7 @@ static int sg_io(struct file *file, struct request_queue *q, */ blk_execute_rq(q, bd_disk, rq, 0); - hdr->duration = ((jiffies - start_time) * 1000) / HZ; + hdr->duration = jiffies_to_msecs(jiffies - start_time); return blk_complete_sghdr_rq(rq, hdr, bio); out: -- cgit v1.2.3-59-g8ed1b From 8896f3c039b0834ba695d154299b724ee5710b97 Mon Sep 17 00:00:00 2001 From: Aaron Carroll Date: Wed, 5 Dec 2007 21:06:50 +1100 Subject: as-iosched: fix incorrect comments Two comments refer to deadlines applying to reads only. This is not the case. Signed-off-by: Aaron Carroll Acked-by: Nick Piggin Signed-off-by: Jens Axboe --- block/as-iosched.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/block/as-iosched.c b/block/as-iosched.c index dc715a562e14..4513fc59c9da 100644 --- a/block/as-iosched.c +++ b/block/as-iosched.c @@ -880,7 +880,7 @@ static void as_remove_queued_request(struct request_queue *q, } /* - * as_fifo_expired returns 0 if there are no expired reads on the fifo, + * as_fifo_expired returns 0 if there are no expired requests on the fifo, * 1 otherwise. It is ratelimited so that we only perform the check once per * `fifo_expire' interval. Otherwise a large number of expired requests * would create a hopeless seekstorm. @@ -1159,7 +1159,7 @@ static void as_add_request(struct request_queue *q, struct request *rq) as_add_rq_rb(ad, rq); /* - * set expire time (only used for reads) and add to fifo list + * set expire time and add to fifo list */ rq_set_fifo_time(rq, jiffies + ad->fifo_expire[data_dir]); list_add_tail(&rq->queuelist, &ad->fifo_list[data_dir]); -- cgit v1.2.3-59-g8ed1b From 49565124b13bb16607e7f8fc8fb1d9c5c355a1a3 Mon Sep 17 00:00:00 2001 From: Aaron Carroll Date: Wed, 5 Dec 2007 21:07:07 +1100 Subject: as-iosched: fix write batch start point New write batches currently start from where the last one completed. We have no idea where the head is after switching batches, so this makes little sense. Instead, start the next batch from the request with the earliest deadline in the hope that we avoid a deadline expiry later on. Signed-off-by: Aaron Carroll Acked-by: Nick Piggin Signed-off-by: Jens Axboe --- block/as-iosched.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/block/as-iosched.c b/block/as-iosched.c index 4513fc59c9da..555cd6bf4ce5 100644 --- a/block/as-iosched.c +++ b/block/as-iosched.c @@ -1097,7 +1097,8 @@ dispatch_writes: ad->batch_data_dir = REQ_ASYNC; ad->current_write_count = ad->write_batch_count; ad->write_batch_idled = 0; - rq = ad->next_rq[ad->batch_data_dir]; + rq = rq_entry_fifo(ad->fifo_list[REQ_ASYNC].next); + ad->last_check_fifo[REQ_ASYNC] = jiffies; goto dispatch_request; } -- cgit v1.2.3-59-g8ed1b From 2fdd82bd8852ec8ebad5c69c45138da25c6f9273 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 12 Dec 2007 18:51:56 +0100 Subject: block: let elv_register() return void elv_register() always returns 0, and there isn't anything it does where it should return an error (the only error condition is so grave that it's handled with a BUG_ON). Signed-off-by: Adrian Bunk Signed-off-by: Jens Axboe --- block/as-iosched.c | 4 +++- block/cfq-iosched.c | 8 ++------ block/deadline-iosched.c | 4 +++- block/elevator.c | 3 +-- block/noop-iosched.c | 4 +++- include/linux/elevator.h | 2 +- 6 files changed, 13 insertions(+), 12 deletions(-) diff --git a/block/as-iosched.c b/block/as-iosched.c index 555cd6bf4ce5..cb5e53b05c7c 100644 --- a/block/as-iosched.c +++ b/block/as-iosched.c @@ -1464,7 +1464,9 @@ static struct elevator_type iosched_as = { static int __init as_init(void) { - return elv_register(&iosched_as); + elv_register(&iosched_as); + + return 0; } static void __exit as_exit(void) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 0b4a47905575..13553e015d72 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -2279,8 +2279,6 @@ static struct elevator_type iosched_cfq = { static int __init cfq_init(void) { - int ret; - /* * could be 0 on HZ < 1000 setups */ @@ -2292,11 +2290,9 @@ static int __init cfq_init(void) if (cfq_slab_setup()) return -ENOMEM; - ret = elv_register(&iosched_cfq); - if (ret) - cfq_slab_kill(); + elv_register(&iosched_cfq); - return ret; + return 0; } static void __exit cfq_exit(void) diff --git a/block/deadline-iosched.c b/block/deadline-iosched.c index a054eef8dff6..342448c3d2dd 100644 --- a/block/deadline-iosched.c +++ b/block/deadline-iosched.c @@ -467,7 +467,9 @@ static struct elevator_type iosched_deadline = { static int __init deadline_init(void) { - return elv_register(&iosched_deadline); + elv_register(&iosched_deadline); + + return 0; } static void __exit deadline_exit(void) diff --git a/block/elevator.c b/block/elevator.c index 446aea2a3cfb..e452deb80395 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -960,7 +960,7 @@ void elv_unregister_queue(struct request_queue *q) __elv_unregister_queue(q->elevator); } -int elv_register(struct elevator_type *e) +void elv_register(struct elevator_type *e) { char *def = ""; @@ -975,7 +975,6 @@ int elv_register(struct elevator_type *e) def = " (default)"; printk(KERN_INFO "io scheduler %s registered%s\n", e->elevator_name, def); - return 0; } EXPORT_SYMBOL_GPL(elv_register); diff --git a/block/noop-iosched.c b/block/noop-iosched.c index 7563d8aa3944..c23e02969650 100644 --- a/block/noop-iosched.c +++ b/block/noop-iosched.c @@ -101,7 +101,9 @@ static struct elevator_type elevator_noop = { static int __init noop_init(void) { - return elv_register(&elevator_noop); + elv_register(&elevator_noop); + + return 0; } static void __exit noop_exit(void) diff --git a/include/linux/elevator.h b/include/linux/elevator.h index e8f42133a616..639624b55fbe 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -119,7 +119,7 @@ extern void elv_put_request(struct request_queue *, struct request *); /* * io scheduler registration */ -extern int elv_register(struct elevator_type *); +extern void elv_register(struct elevator_type *); extern void elv_unregister(struct elevator_type *); /* -- cgit v1.2.3-59-g8ed1b From 458cf5e9b666c251b04cb5242fb19fd5114645ba Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 17 Dec 2007 20:24:20 +0100 Subject: Cleanup umem driver: fix most checkpatch warnings, conform to kernel coding style. linux-2.6.24-rc5-git3> checkpatch.pl-next patches/block-umem-ckpatch.patch total: 0 errors, 5 warnings, 530 lines checked All of these are line-length warnings. Only change in generated object file is due to not initializing a static global variable to 0. Signed-off-by: Randy Dunlap Signed-off-by: Jens Axboe --- drivers/block/umem.c | 237 ++++++++++++++++++--------------------------------- 1 file changed, 81 insertions(+), 156 deletions(-) diff --git a/drivers/block/umem.c b/drivers/block/umem.c index 5f5095afb06b..c24e1bdbad43 100644 --- a/drivers/block/umem.c +++ b/drivers/block/umem.c @@ -34,7 +34,7 @@ * - set initialised bit then. */ -//#define DEBUG /* uncomment if you want debugging info (pr_debug) */ +#undef DEBUG /* #define DEBUG if you want debugging info (pr_debug) */ #include #include #include @@ -143,17 +143,12 @@ static struct cardinfo cards[MM_MAXCARDS]; static struct block_device_operations mm_fops; static struct timer_list battery_timer; -static int num_cards = 0; +static int num_cards; static struct gendisk *mm_gendisk[MM_MAXCARDS]; static void check_batteries(struct cardinfo *card); -/* ------------------------------------------------------------------------------------ --- get_userbit ------------------------------------------------------------------------------------ -*/ static int get_userbit(struct cardinfo *card, int bit) { unsigned char led; @@ -161,11 +156,7 @@ static int get_userbit(struct cardinfo *card, int bit) led = readb(card->csr_remap + MEMCTRLCMD_LEDCTRL); return led & bit; } -/* ------------------------------------------------------------------------------------ --- set_userbit ------------------------------------------------------------------------------------ -*/ + static int set_userbit(struct cardinfo *card, int bit, unsigned char state) { unsigned char led; @@ -179,11 +170,7 @@ static int set_userbit(struct cardinfo *card, int bit, unsigned char state) return 0; } -/* ------------------------------------------------------------------------------------ --- set_led ------------------------------------------------------------------------------------ -*/ + /* * NOTE: For the power LED, use the LED_POWER_* macros since they differ */ @@ -203,11 +190,6 @@ static void set_led(struct cardinfo *card, int shift, unsigned char state) } #ifdef MM_DIAG -/* ------------------------------------------------------------------------------------ --- dump_regs ------------------------------------------------------------------------------------ -*/ static void dump_regs(struct cardinfo *card) { unsigned char *p; @@ -224,32 +206,28 @@ static void dump_regs(struct cardinfo *card) } } #endif -/* ------------------------------------------------------------------------------------ --- dump_dmastat ------------------------------------------------------------------------------------ -*/ + static void dump_dmastat(struct cardinfo *card, unsigned int dmastat) { dev_printk(KERN_DEBUG, &card->dev->dev, "DMAstat - "); if (dmastat & DMASCR_ANY_ERR) - printk("ANY_ERR "); + printk(KERN_CONT "ANY_ERR "); if (dmastat & DMASCR_MBE_ERR) - printk("MBE_ERR "); + printk(KERN_CONT "MBE_ERR "); if (dmastat & DMASCR_PARITY_ERR_REP) - printk("PARITY_ERR_REP "); + printk(KERN_CONT "PARITY_ERR_REP "); if (dmastat & DMASCR_PARITY_ERR_DET) - printk("PARITY_ERR_DET "); + printk(KERN_CONT "PARITY_ERR_DET "); if (dmastat & DMASCR_SYSTEM_ERR_SIG) - printk("SYSTEM_ERR_SIG "); + printk(KERN_CONT "SYSTEM_ERR_SIG "); if (dmastat & DMASCR_TARGET_ABT) - printk("TARGET_ABT "); + printk(KERN_CONT "TARGET_ABT "); if (dmastat & DMASCR_MASTER_ABT) - printk("MASTER_ABT "); + printk(KERN_CONT "MASTER_ABT "); if (dmastat & DMASCR_CHAIN_COMPLETE) - printk("CHAIN_COMPLETE "); + printk(KERN_CONT "CHAIN_COMPLETE "); if (dmastat & DMASCR_DMA_COMPLETE) - printk("DMA_COMPLETE "); + printk(KERN_CONT "DMA_COMPLETE "); printk("\n"); } @@ -286,7 +264,8 @@ static void mm_start_io(struct cardinfo *card) /* make the last descriptor end the chain */ page = &card->mm_pages[card->Active]; - pr_debug("start_io: %d %d->%d\n", card->Active, page->headcnt, page->cnt-1); + pr_debug("start_io: %d %d->%d\n", + card->Active, page->headcnt, page->cnt - 1); desc = &page->desc[page->cnt-1]; desc->control_bits |= cpu_to_le32(DMASCR_CHAIN_COMP_EN); @@ -310,8 +289,8 @@ static void mm_start_io(struct cardinfo *card) writel(0, card->csr_remap + DMA_SEMAPHORE_ADDR); writel(0, card->csr_remap + DMA_SEMAPHORE_ADDR + 4); - offset = ((char*)desc) - ((char*)page->desc); - writel(cpu_to_le32((page->page_dma+offset)&0xffffffff), + offset = ((char *)desc) - ((char *)page->desc); + writel(cpu_to_le32((page->page_dma+offset) & 0xffffffff), card->csr_remap + DMA_DESCRIPTOR_ADDR); /* Force the value to u64 before shifting otherwise >> 32 is undefined C * and on some ports will do nothing ! */ @@ -352,7 +331,7 @@ static inline void reset_page(struct mm_page *page) page->cnt = 0; page->headcnt = 0; page->bio = NULL; - page->biotail = & page->bio; + page->biotail = &page->bio; } static void mm_unplug_device(struct request_queue *q) @@ -408,7 +387,7 @@ static int add_bio(struct cardinfo *card) vec->bv_page, vec->bv_offset, len, - (rw==READ) ? + (rw == READ) ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE); p = &card->mm_pages[card->Ready]; @@ -427,10 +406,10 @@ static int add_bio(struct cardinfo *card) desc->pci_addr = cpu_to_le64((u64)desc->data_dma_handle); desc->local_addr = cpu_to_le64(card->current_sector << 9); desc->transfer_size = cpu_to_le32(len); - offset = ( ((char*)&desc->sem_control_bits) - ((char*)p->desc)); + offset = (((char *)&desc->sem_control_bits) - ((char *)p->desc)); desc->sem_addr = cpu_to_le64((u64)(p->page_dma+offset)); desc->zero1 = desc->zero2 = 0; - offset = ( ((char*)(desc+1)) - ((char*)p->desc)); + offset = (((char *)(desc+1)) - ((char *)p->desc)); desc->next_desc_addr = cpu_to_le64(p->page_dma+offset); desc->control_bits = cpu_to_le32(DMASCR_GO|DMASCR_ERR_INT_EN| DMASCR_PARITY_INT_EN| @@ -455,11 +434,11 @@ static void process_page(unsigned long data) /* check if any of the requests in the page are DMA_COMPLETE, * and deal with them appropriately. * If we find a descriptor without DMA_COMPLETE in the semaphore, then - * dma must have hit an error on that descriptor, so use dma_status instead - * and assume that all following descriptors must be re-tried. + * dma must have hit an error on that descriptor, so use dma_status + * instead and assume that all following descriptors must be re-tried. */ struct mm_page *page; - struct bio *return_bio=NULL; + struct bio *return_bio = NULL; struct cardinfo *card = (struct cardinfo *)data; unsigned int dma_status = card->dma_status; @@ -472,12 +451,12 @@ static void process_page(unsigned long data) struct bio *bio = page->bio; struct mm_dma_desc *desc = &page->desc[page->headcnt]; int control = le32_to_cpu(desc->sem_control_bits); - int last=0; + int last = 0; int idx; if (!(control & DMASCR_DMA_COMPLETE)) { control = dma_status; - last=1; + last = 1; } page->headcnt++; idx = page->idx; @@ -489,8 +468,8 @@ static void process_page(unsigned long data) } pci_unmap_page(card->dev, desc->data_dma_handle, - bio_iovec_idx(bio,idx)->bv_len, - (control& DMASCR_TRANSFER_READ) ? + bio_iovec_idx(bio, idx)->bv_len, + (control & DMASCR_TRANSFER_READ) ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE); if (control & DMASCR_HARD_ERROR) { /* error */ @@ -501,9 +480,10 @@ static void process_page(unsigned long data) le32_to_cpu(desc->transfer_size)); dump_dmastat(card, control); } else if (test_bit(BIO_RW, &bio->bi_rw) && - le32_to_cpu(desc->local_addr)>>9 == card->init_size) { - card->init_size += le32_to_cpu(desc->transfer_size)>>9; - if (card->init_size>>1 >= card->mm_size) { + le32_to_cpu(desc->local_addr) >> 9 == + card->init_size) { + card->init_size += le32_to_cpu(desc->transfer_size) >> 9; + if (card->init_size >> 1 >= card->mm_size) { dev_printk(KERN_INFO, &card->dev->dev, "memory now initialised\n"); set_userbit(card, MEMORY_INITIALIZED, 1); @@ -514,7 +494,8 @@ static void process_page(unsigned long data) return_bio = bio; } - if (last) break; + if (last) + break; } if (debug & DEBUG_LED_ON_TRANSFER) @@ -536,7 +517,7 @@ static void process_page(unsigned long data) out_unlock: spin_unlock_bh(&card->lock); - while(return_bio) { + while (return_bio) { struct bio *bio = return_bio; return_bio = bio->bi_next; @@ -545,11 +526,6 @@ static void process_page(unsigned long data) } } -/* ------------------------------------------------------------------------------------ --- mm_make_request ------------------------------------------------------------------------------------ -*/ static int mm_make_request(struct request_queue *q, struct bio *bio) { struct cardinfo *card = q->queuedata; @@ -566,11 +542,6 @@ static int mm_make_request(struct request_queue *q, struct bio *bio) return 0; } -/* ------------------------------------------------------------------------------------ --- mm_interrupt ------------------------------------------------------------------------------------ -*/ static irqreturn_t mm_interrupt(int irq, void *__card) { struct cardinfo *card = (struct cardinfo *) __card; @@ -584,15 +555,15 @@ HW_TRACE(0x30); if (!(dma_status & (DMASCR_ERROR_MASK | DMASCR_CHAIN_COMPLETE))) { /* interrupt wasn't for me ... */ return IRQ_NONE; - } + } /* clear COMPLETION interrupts */ if (card->flags & UM_FLAG_NO_BYTE_STATUS) writel(cpu_to_le32(DMASCR_DMA_COMPLETE|DMASCR_CHAIN_COMPLETE), - card->csr_remap+ DMA_STATUS_CTRL); + card->csr_remap + DMA_STATUS_CTRL); else writeb((DMASCR_DMA_COMPLETE|DMASCR_CHAIN_COMPLETE) >> 16, - card->csr_remap+ DMA_STATUS_CTRL + 2); + card->csr_remap + DMA_STATUS_CTRL + 2); /* log errors and clear interrupt status */ if (dma_status & DMASCR_ANY_ERR) { @@ -602,9 +573,12 @@ HW_TRACE(0x30); stat = readb(card->csr_remap + MEMCTRLCMD_ERRSTATUS); - data_log1 = le32_to_cpu(readl(card->csr_remap + ERROR_DATA_LOG)); - data_log2 = le32_to_cpu(readl(card->csr_remap + ERROR_DATA_LOG + 4)); - addr_log1 = le32_to_cpu(readl(card->csr_remap + ERROR_ADDR_LOG)); + data_log1 = le32_to_cpu(readl(card->csr_remap + + ERROR_DATA_LOG)); + data_log2 = le32_to_cpu(readl(card->csr_remap + + ERROR_DATA_LOG + 4)); + addr_log1 = le32_to_cpu(readl(card->csr_remap + + ERROR_ADDR_LOG)); addr_log2 = readb(card->csr_remap + ERROR_ADDR_LOG + 4); count = readb(card->csr_remap + ERROR_COUNT); @@ -671,11 +645,7 @@ HW_TRACE(0x36); return IRQ_HANDLED; } -/* ------------------------------------------------------------------------------------ --- set_fault_to_battery_status ------------------------------------------------------------------------------------ -*/ + /* * If both batteries are good, no LED * If either battery has been warned, solid LED @@ -696,12 +666,6 @@ static void set_fault_to_battery_status(struct cardinfo *card) static void init_battery_timer(void); - -/* ------------------------------------------------------------------------------------ --- check_battery ------------------------------------------------------------------------------------ -*/ static int check_battery(struct cardinfo *card, int battery, int status) { if (status != card->battery[battery].good) { @@ -730,11 +694,7 @@ static int check_battery(struct cardinfo *card, int battery, int status) return 0; } -/* ------------------------------------------------------------------------------------ --- check_batteries ------------------------------------------------------------------------------------ -*/ + static void check_batteries(struct cardinfo *card) { /* NOTE: this must *never* be called while the card @@ -775,11 +735,7 @@ static void check_all_batteries(unsigned long ptr) init_battery_timer(); } -/* ------------------------------------------------------------------------------------ --- init_battery_timer ------------------------------------------------------------------------------------ -*/ + static void init_battery_timer(void) { init_timer(&battery_timer); @@ -787,20 +743,12 @@ static void init_battery_timer(void) battery_timer.expires = jiffies + (HZ * 60); add_timer(&battery_timer); } -/* ------------------------------------------------------------------------------------ --- del_battery_timer ------------------------------------------------------------------------------------ -*/ + static void del_battery_timer(void) { del_timer(&battery_timer); } -/* ------------------------------------------------------------------------------------ --- mm_revalidate ------------------------------------------------------------------------------------ -*/ + /* * Note no locks taken out here. In a worst case scenario, we could drop * a chunk of system memory. But that should never happen, since validation @@ -833,33 +781,23 @@ static int mm_getgeo(struct block_device *bdev, struct hd_geometry *geo) } /* ------------------------------------------------------------------------------------ --- mm_check_change ------------------------------------------------------------------------------------ - Future support for removable devices -*/ + * Future support for removable devices + */ static int mm_check_change(struct gendisk *disk) { /* struct cardinfo *dev = disk->private_data; */ return 0; } -/* ------------------------------------------------------------------------------------ --- mm_fops ------------------------------------------------------------------------------------ -*/ + static struct block_device_operations mm_fops = { .owner = THIS_MODULE, .getgeo = mm_getgeo, - .revalidate_disk= mm_revalidate, + .revalidate_disk = mm_revalidate, .media_changed = mm_check_change, }; -/* ------------------------------------------------------------------------------------ --- mm_pci_probe ------------------------------------------------------------------------------------ -*/ -static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) + +static int __devinit mm_pci_probe(struct pci_dev *dev, + const struct pci_device_id *id) { int ret = -ENODEV; struct cardinfo *card = &cards[num_cards]; @@ -889,7 +827,7 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i return -ENODEV; dev_printk(KERN_INFO, &dev->dev, - "Micro Memory(tm) controller found (PCI Mem Module (Battery Backup))\n"); + "Micro Memory(tm) controller found (PCI Mem Module (Battery Backup))\n"); if (pci_set_dma_mask(dev, DMA_64BIT_MASK) && pci_set_dma_mask(dev, DMA_32BIT_MASK)) { @@ -917,7 +855,7 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i "CSR 0x%08lx -> 0x%p (0x%lx)\n", csr_base, card->csr_remap, csr_len); - switch(card->dev->device) { + switch (card->dev->device) { case 0x5415: card->flags |= UM_FLAG_NO_BYTE_STATUS | UM_FLAG_NO_BATTREG; magic_number = 0x59; @@ -929,7 +867,8 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i break; case 0x6155: - card->flags |= UM_FLAG_NO_BYTE_STATUS | UM_FLAG_NO_BATTREG | UM_FLAG_NO_BATT; + card->flags |= UM_FLAG_NO_BYTE_STATUS | + UM_FLAG_NO_BATTREG | UM_FLAG_NO_BATT; magic_number = 0x99; break; @@ -945,11 +884,11 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i } card->mm_pages[0].desc = pci_alloc_consistent(card->dev, - PAGE_SIZE*2, - &card->mm_pages[0].page_dma); + PAGE_SIZE * 2, + &card->mm_pages[0].page_dma); card->mm_pages[1].desc = pci_alloc_consistent(card->dev, - PAGE_SIZE*2, - &card->mm_pages[1].page_dma); + PAGE_SIZE * 2, + &card->mm_pages[1].page_dma); if (card->mm_pages[0].desc == NULL || card->mm_pages[1].desc == NULL) { dev_printk(KERN_ERR, &card->dev->dev, "alloc failed\n"); @@ -1013,9 +952,9 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i dev_printk(KERN_INFO, &card->dev->dev, "Size %d KB, Battery 1 %s (%s), Battery 2 %s (%s)\n", card->mm_size, - (batt_status & BATTERY_1_DISABLED ? "Disabled" : "Enabled"), + batt_status & BATTERY_1_DISABLED ? "Disabled" : "Enabled", card->battery[0].good ? "OK" : "FAILURE", - (batt_status & BATTERY_2_DISABLED ? "Disabled" : "Enabled"), + batt_status & BATTERY_2_DISABLED ? "Disabled" : "Enabled", card->battery[1].good ? "OK" : "FAILURE"); set_fault_to_battery_status(card); @@ -1030,18 +969,18 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i data = ~data; data += 1; - if (request_irq(dev->irq, mm_interrupt, IRQF_SHARED, DRIVER_NAME, card)) { + if (request_irq(dev->irq, mm_interrupt, IRQF_SHARED, DRIVER_NAME, + card)) { dev_printk(KERN_ERR, &card->dev->dev, "Unable to allocate IRQ\n"); ret = -ENODEV; - goto failed_req_irq; } dev_printk(KERN_INFO, &card->dev->dev, "Window size %d bytes, IRQ %d\n", data, dev->irq); - spin_lock_init(&card->lock); + spin_lock_init(&card->lock); pci_set_drvdata(dev, card); @@ -1060,7 +999,7 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i if (!get_userbit(card, MEMORY_INITIALIZED)) { dev_printk(KERN_INFO, &card->dev->dev, - "memory NOT initialized. Consider over-writing whole device.\n"); + "memory NOT initialized. Consider over-writing whole device.\n"); card->init_size = 0; } else { dev_printk(KERN_INFO, &card->dev->dev, @@ -1091,11 +1030,7 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i return ret; } -/* ------------------------------------------------------------------------------------ --- mm_pci_remove ------------------------------------------------------------------------------------ -*/ + static void mm_pci_remove(struct pci_dev *dev) { struct cardinfo *card = pci_get_drvdata(dev); @@ -1119,16 +1054,16 @@ static void mm_pci_remove(struct pci_dev *dev) } static const struct pci_device_id mm_pci_ids[] = { - {PCI_DEVICE(PCI_VENDOR_ID_MICRO_MEMORY,PCI_DEVICE_ID_MICRO_MEMORY_5415CN)}, - {PCI_DEVICE(PCI_VENDOR_ID_MICRO_MEMORY,PCI_DEVICE_ID_MICRO_MEMORY_5425CN)}, - {PCI_DEVICE(PCI_VENDOR_ID_MICRO_MEMORY,PCI_DEVICE_ID_MICRO_MEMORY_6155)}, + {PCI_DEVICE(PCI_VENDOR_ID_MICRO_MEMORY, PCI_DEVICE_ID_MICRO_MEMORY_5415CN)}, + {PCI_DEVICE(PCI_VENDOR_ID_MICRO_MEMORY, PCI_DEVICE_ID_MICRO_MEMORY_5425CN)}, + {PCI_DEVICE(PCI_VENDOR_ID_MICRO_MEMORY, PCI_DEVICE_ID_MICRO_MEMORY_6155)}, { .vendor = 0x8086, .device = 0xB555, - .subvendor= 0x1332, - .subdevice= 0x5460, - .class = 0x050000, - .class_mask= 0, + .subvendor = 0x1332, + .subdevice = 0x5460, + .class = 0x050000, + .class_mask = 0, }, { /* end: all zeroes */ } }; @@ -1141,12 +1076,6 @@ static struct pci_driver mm_pci_driver = { .remove = mm_pci_remove, }; -/* ------------------------------------------------------------------------------------ --- mm_init ------------------------------------------------------------------------------------ -*/ - static int __init mm_init(void) { int retval, i; @@ -1193,18 +1122,14 @@ out: put_disk(mm_gendisk[i]); return -ENOMEM; } -/* ------------------------------------------------------------------------------------ --- mm_cleanup ------------------------------------------------------------------------------------ -*/ + static void __exit mm_cleanup(void) { int i; del_battery_timer(); - for (i=0; i < num_cards ; i++) { + for (i = 0; i < num_cards ; i++) { del_gendisk(mm_gendisk[i]); put_disk(mm_gendisk[i]); } -- cgit v1.2.3-59-g8ed1b From 051a1d1afa47206e23ae03f781c6795ce870e3d5 Mon Sep 17 00:00:00 2001 From: Dmitry Adamushko Date: Tue, 18 Dec 2007 15:21:13 +0100 Subject: sched: fix crash on ia64, introduce task_current() Some services (e.g. sched_setscheduler(), rt_mutex_setprio() and sched_move_task()) must handle a given task differently in case it's the 'rq->curr' task on its run-queue. The task_running() interface is not suitable for determining such tasks for platforms with one of the following options: #define __ARCH_WANT_UNLOCKED_CTXSW #define __ARCH_WANT_INTERRUPTS_ON_CTXSW Due to the fact that it makes use of 'p->oncpu == 1' as a criterion but such a task is not necessarily 'rq->curr'. The detailed explanation is available here: https://lists.linux-foundation.org/pipermail/containers/2007-December/009262.html Signed-off-by: Dmitry Adamushko Signed-off-by: Ingo Molnar Tested-by: Dhaval Giani Tested-by: KAMEZAWA Hiroyuki --- kernel/sched.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index c6e551de795b..5ae0d4296e7c 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -508,10 +508,15 @@ EXPORT_SYMBOL_GPL(cpu_clock); # define finish_arch_switch(prev) do { } while (0) #endif +static inline int task_current(struct rq *rq, struct task_struct *p) +{ + return rq->curr == p; +} + #ifndef __ARCH_WANT_UNLOCKED_CTXSW static inline int task_running(struct rq *rq, struct task_struct *p) { - return rq->curr == p; + return task_current(rq, p); } static inline void prepare_lock_switch(struct rq *rq, struct task_struct *next) @@ -540,7 +545,7 @@ static inline int task_running(struct rq *rq, struct task_struct *p) #ifdef CONFIG_SMP return p->oncpu; #else - return rq->curr == p; + return task_current(rq, p); #endif } @@ -3334,7 +3339,7 @@ unsigned long long task_sched_runtime(struct task_struct *p) rq = task_rq_lock(p, &flags); ns = p->se.sum_exec_runtime; - if (rq->curr == p) { + if (task_current(rq, p)) { update_rq_clock(rq); delta_exec = rq->clock - p->se.exec_start; if ((s64)delta_exec > 0) @@ -4021,7 +4026,7 @@ void rt_mutex_setprio(struct task_struct *p, int prio) oldprio = p->prio; on_rq = p->se.on_rq; - running = task_running(rq, p); + running = task_current(rq, p); if (on_rq) { dequeue_task(rq, p, 0); if (running) @@ -4332,7 +4337,7 @@ recheck: } update_rq_clock(rq); on_rq = p->se.on_rq; - running = task_running(rq, p); + running = task_current(rq, p); if (on_rq) { deactivate_task(rq, p, 0); if (running) @@ -7101,7 +7106,7 @@ void sched_move_task(struct task_struct *tsk) update_rq_clock(rq); - running = task_running(rq, tsk); + running = task_current(rq, tsk); on_rq = tsk->se.on_rq; if (on_rq) { -- cgit v1.2.3-59-g8ed1b From c7af77b584b02d3e321b00203a618a9c93782121 Mon Sep 17 00:00:00 2001 From: Livio Soares Date: Tue, 18 Dec 2007 15:21:13 +0100 Subject: sched: mark rwsem functions as __sched for wchan/profiling This following commit http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=fdf8cb0909b531f9ae8f9b9d7e4eb35ba3505f07 un-inlined a low-level rwsem function, but did not mark it as __sched. The result is that it now shows up as thread wchan (which also affects /proc/profile stats). The following simple patch fixes this by properly marking rwsem_down_failed_common() as a __sched function. Also in this patch, which is up for discussion, marks down_read() and down_write() proper as __sched. For profiling, it is pretty much useless to know that a semaphore is beig help - it is necessary to know _which_ one. By going up another frame on the stack, the information becomes much more useful. In summary, the below change to lib/rwsem.c should be applied; the changes to kernel/rwsem.c could be applied if other kernel hackers agree with my proposal that down_read()/down_write() in the profile is not enough. [ akpm@linux-foundation.org: build fix ] Signed-off-by: Livio Soares Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- kernel/rwsem.c | 5 +++-- lib/rwsem.c | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/kernel/rwsem.c b/kernel/rwsem.c index 1ec620c03064..cae050b05f5e 100644 --- a/kernel/rwsem.c +++ b/kernel/rwsem.c @@ -6,6 +6,7 @@ #include #include +#include #include #include @@ -15,7 +16,7 @@ /* * lock for reading */ -void down_read(struct rw_semaphore *sem) +void __sched down_read(struct rw_semaphore *sem) { might_sleep(); rwsem_acquire_read(&sem->dep_map, 0, 0, _RET_IP_); @@ -42,7 +43,7 @@ EXPORT_SYMBOL(down_read_trylock); /* * lock for writing */ -void down_write(struct rw_semaphore *sem) +void __sched down_write(struct rw_semaphore *sem) { might_sleep(); rwsem_acquire(&sem->dep_map, 0, 0, _RET_IP_); diff --git a/lib/rwsem.c b/lib/rwsem.c index cdb4e3d05607..7d02700a4b0e 100644 --- a/lib/rwsem.c +++ b/lib/rwsem.c @@ -146,7 +146,7 @@ __rwsem_do_wake(struct rw_semaphore *sem, int downgrading) /* * wait for a lock to be granted */ -static struct rw_semaphore * +static struct rw_semaphore __sched * rwsem_down_failed_common(struct rw_semaphore *sem, struct rwsem_waiter *waiter, signed long adjustment) { -- cgit v1.2.3-59-g8ed1b From 73c4efd2c88a41c8a4810904266a34423b5584e5 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 18 Dec 2007 15:21:13 +0100 Subject: sched: sysctl, proc_dointvec_minmax() expects int values for min_sched_granularity_ns, max_sched_granularity_ns, min_wakeup_granularity_ns and max_wakeup_granularity_ns are declared "unsigned long". This is incorrect since proc_dointvec_minmax() expects plain "int" guard values. This bug only triggers on big endian 64 bit arches. Signed-off-by: Eric Dumazet Signed-off-by: Ingo Molnar --- kernel/sysctl.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 1135de730872..c68f68dcc605 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -225,10 +225,10 @@ static struct ctl_table root_table[] = { }; #ifdef CONFIG_SCHED_DEBUG -static unsigned long min_sched_granularity_ns = 100000; /* 100 usecs */ -static unsigned long max_sched_granularity_ns = NSEC_PER_SEC; /* 1 second */ -static unsigned long min_wakeup_granularity_ns; /* 0 usecs */ -static unsigned long max_wakeup_granularity_ns = NSEC_PER_SEC; /* 1 second */ +static int min_sched_granularity_ns = 100000; /* 100 usecs */ +static int max_sched_granularity_ns = NSEC_PER_SEC; /* 1 second */ +static int min_wakeup_granularity_ns; /* 0 usecs */ +static int max_wakeup_granularity_ns = NSEC_PER_SEC; /* 1 second */ #endif static struct ctl_table kern_table[] = { -- cgit v1.2.3-59-g8ed1b From 2bacec8c318ca0418c0ee9ac662ee44207765dd4 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 18 Dec 2007 15:21:13 +0100 Subject: sched: touch softlockup watchdog after idling touch softlockup watchdog after idling. Signed-off-by: Ingo Molnar --- kernel/sched.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/sched.c b/kernel/sched.c index 5ae0d4296e7c..3df84ea6aba9 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -668,6 +668,7 @@ void sched_clock_idle_wakeup_event(u64 delta_ns) struct rq *rq = cpu_rq(smp_processor_id()); u64 now = sched_clock(); + touch_softlockup_watchdog(); rq->idle_clock += delta_ns; /* * Override the previous timestamp and ignore all -- cgit v1.2.3-59-g8ed1b From 6cbf1c126cf6a727287d61b122fde00a8b827bfe Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 18 Dec 2007 15:21:13 +0100 Subject: sched: do not hurt SCHED_BATCH on wakeup measurements by Yanmin Zhang have shown that SCHED_BATCH tasks benefit if they run the same place_entity() logic as SCHED_OTHER tasks - so uniformize behavior in this area. Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index c33f0ceb3de9..da7c061e7206 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -511,8 +511,7 @@ place_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int initial) if (!initial) { /* sleeps upto a single latency don't count. */ - if (sched_feat(NEW_FAIR_SLEEPERS) && entity_is_task(se) && - task_of(se)->policy != SCHED_BATCH) + if (sched_feat(NEW_FAIR_SLEEPERS) && entity_is_task(se)) vruntime -= sysctl_sched_latency; /* ensure we never gain time by being placed backwards. */ -- cgit v1.2.3-59-g8ed1b From bd87f1f028ddaad45d4a9a3621dfe688c840ba41 Mon Sep 17 00:00:00 2001 From: Barry Kasindorf Date: Tue, 18 Dec 2007 18:05:58 +0100 Subject: oprofile: op_model_athlon.c support for AMD family 10h barcelona performance counters This patch is for controlling the upper 32bits of the event ctrl msrs. This includes the upper 4 bits of the event select and the Guest Only and Host Only bits This patch is necessary to make Event Based Profiling work reliably on a Family 10h processor [akpm@linux-foundation.org: checkpatch.pl fixes] Signed-off-by: Barry Kasindorf Signed-off-by: Robert Richter Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/oprofile/op_model_athlon.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/arch/x86/oprofile/op_model_athlon.c b/arch/x86/oprofile/op_model_athlon.c index 3057a19e4641..c3ee43333f26 100644 --- a/arch/x86/oprofile/op_model_athlon.c +++ b/arch/x86/oprofile/op_model_athlon.c @@ -1,6 +1,6 @@ /** * @file op_model_athlon.h - * athlon / K7 model-specific MSR operations + * athlon / K7 / K8 / Family 10h model-specific MSR operations * * @remark Copyright 2002 OProfile authors * @remark Read the file COPYING @@ -31,12 +31,16 @@ #define CTRL_WRITE(l,h,msrs,c) do {wrmsr(msrs->controls[(c)].addr, (l), (h));} while (0) #define CTRL_SET_ACTIVE(n) (n |= (1<<22)) #define CTRL_SET_INACTIVE(n) (n &= ~(1<<22)) -#define CTRL_CLEAR(x) (x &= (1<<21)) +#define CTRL_CLEAR_LO(x) (x &= (1<<21)) +#define CTRL_CLEAR_HI(x) (x &= 0xfffffcf0) #define CTRL_SET_ENABLE(val) (val |= 1<<20) #define CTRL_SET_USR(val,u) (val |= ((u & 1) << 16)) #define CTRL_SET_KERN(val,k) (val |= ((k & 1) << 17)) #define CTRL_SET_UM(val, m) (val |= (m << 8)) -#define CTRL_SET_EVENT(val, e) (val |= e) +#define CTRL_SET_EVENT_LOW(val, e) (val |= (e & 0xff)) +#define CTRL_SET_EVENT_HIGH(val, e) (val |= ((e >> 8) & 0xf)) +#define CTRL_SET_HOST_ONLY(val, h) (val |= ((h & 1) << 9)) +#define CTRL_SET_GUEST_ONLY(val, h) (val |= ((h & 1) << 8)) static unsigned long reset_value[NUM_COUNTERS]; @@ -70,7 +74,8 @@ static void athlon_setup_ctrs(struct op_msrs const * const msrs) if (unlikely(!CTRL_IS_RESERVED(msrs,i))) continue; CTRL_READ(low, high, msrs, i); - CTRL_CLEAR(low); + CTRL_CLEAR_LO(low); + CTRL_CLEAR_HI(high); CTRL_WRITE(low, high, msrs, i); } @@ -89,12 +94,17 @@ static void athlon_setup_ctrs(struct op_msrs const * const msrs) CTR_WRITE(counter_config[i].count, msrs, i); CTRL_READ(low, high, msrs, i); - CTRL_CLEAR(low); + CTRL_CLEAR_LO(low); + CTRL_CLEAR_HI(high); CTRL_SET_ENABLE(low); CTRL_SET_USR(low, counter_config[i].user); CTRL_SET_KERN(low, counter_config[i].kernel); CTRL_SET_UM(low, counter_config[i].unit_mask); - CTRL_SET_EVENT(low, counter_config[i].event); + CTRL_SET_EVENT_LOW(low, counter_config[i].event); + CTRL_SET_EVENT_HIGH(high, counter_config[i].event); + CTRL_SET_HOST_ONLY(high, 0); + CTRL_SET_GUEST_ONLY(high, 0); + CTRL_WRITE(low, high, msrs, i); } else { reset_value[i] = 0; -- cgit v1.2.3-59-g8ed1b From cdc6f27d9e3c2f7ca1a3e19c6eabb1ad6a2add5d Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 18 Dec 2007 18:05:58 +0100 Subject: clockevents: fix reprogramming decision in oneshot broadcast Resolve the following regression of a choppy, almost unusable laptop: http://lkml.org/lkml/2007/12/7/299 http://bugzilla.kernel.org/show_bug.cgi?id=9525 A previous version of the code did the reprogramming of the broadcast device in the return from idle code. This was removed, but the logic in tick_handle_oneshot_broadcast() was kept the same. When a broadcast interrupt happens we signal the expiry to all CPUs which have an expired event. If none of the CPUs has an expired event, which can happen in dyntick mode, then we reprogram the broadcast device. We do not reprogram otherwise, but this is only correct if all CPUs, which are in the idle broadcast state have been woken up. The code ignores, that there might be pending not yet expired events on other CPUs, which are in the idle broadcast state. So the delivery of those events can be delayed for quite a time. Change the tick_handle_oneshot_broadcast() function to check for CPUs, which are in broadcast state and are not woken up by the current event, and enforce the rearming of the broadcast device for those CPUs. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- kernel/time/tick-broadcast.c | 56 +++++++++++++++++--------------------------- 1 file changed, 21 insertions(+), 35 deletions(-) diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index aa82d7bf478a..5b86698faa0b 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -383,33 +383,6 @@ int tick_resume_broadcast_oneshot(struct clock_event_device *bc) return 0; } -/* - * Reprogram the broadcast device: - * - * Called with tick_broadcast_lock held and interrupts disabled. - */ -static int tick_broadcast_reprogram(void) -{ - ktime_t expires = { .tv64 = KTIME_MAX }; - struct tick_device *td; - int cpu; - - /* - * Find the event which expires next: - */ - for (cpu = first_cpu(tick_broadcast_oneshot_mask); cpu != NR_CPUS; - cpu = next_cpu(cpu, tick_broadcast_oneshot_mask)) { - td = &per_cpu(tick_cpu_device, cpu); - if (td->evtdev->next_event.tv64 < expires.tv64) - expires = td->evtdev->next_event; - } - - if (expires.tv64 == KTIME_MAX) - return 0; - - return tick_broadcast_set_event(expires, 0); -} - /* * Handle oneshot mode broadcasting */ @@ -417,12 +390,13 @@ static void tick_handle_oneshot_broadcast(struct clock_event_device *dev) { struct tick_device *td; cpumask_t mask; - ktime_t now; + ktime_t now, next_event; int cpu; spin_lock(&tick_broadcast_lock); again: dev->next_event.tv64 = KTIME_MAX; + next_event.tv64 = KTIME_MAX; mask = CPU_MASK_NONE; now = ktime_get(); /* Find all expired events */ @@ -431,19 +405,31 @@ again: td = &per_cpu(tick_cpu_device, cpu); if (td->evtdev->next_event.tv64 <= now.tv64) cpu_set(cpu, mask); + else if (td->evtdev->next_event.tv64 < next_event.tv64) + next_event.tv64 = td->evtdev->next_event.tv64; } /* - * Wakeup the cpus which have an expired event. The broadcast - * device is reprogrammed in the return from idle code. + * Wakeup the cpus which have an expired event. + */ + tick_do_broadcast(mask); + + /* + * Two reasons for reprogram: + * + * - The global event did not expire any CPU local + * events. This happens in dyntick mode, as the maximum PIT + * delta is quite small. + * + * - There are pending events on sleeping CPUs which were not + * in the event mask */ - if (!tick_do_broadcast(mask)) { + if (next_event.tv64 != KTIME_MAX) { /* - * The global event did not expire any CPU local - * events. This happens in dyntick mode, as the - * maximum PIT delta is quite small. + * Rearm the broadcast device. If event expired, + * repeat the above */ - if (tick_broadcast_reprogram()) + if (tick_broadcast_set_event(next_event, 0)) goto again; } spin_unlock(&tick_broadcast_lock); -- cgit v1.2.3-59-g8ed1b From b019e57321f3e006c0ec7a54f13efc377bcb6451 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 18 Dec 2007 18:05:58 +0100 Subject: genirq: add unlocked version of set_irq_handler() Add unlocked version for use by irq_chip.set_type handlers which may wish to change handler to level or edge handler when IRQ type is changed. The normal set_irq_handler() call cannot be used because it tries to take irq_desc.lock which is already held when the irq_chip.set_type hook is called. Signed-off-by: Kevin Hilman Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/irq.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/include/linux/irq.h b/include/linux/irq.h index efc88538b2ba..4669be080617 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -339,6 +339,13 @@ extern void __set_irq_handler(unsigned int irq, irq_flow_handler_t handle, int is_chained, const char *name); +/* caller has locked the irq_desc and both params are valid */ +static inline void __set_irq_handler_unlocked(int irq, + irq_flow_handler_t handler) +{ + irq_desc[irq].handle_irq = handler; +} + /* * Set a highlevel flow handler for a given IRQ: */ -- cgit v1.2.3-59-g8ed1b From b4be625852618636a6b54908c4f9d90fb29dc549 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 18 Dec 2007 18:05:58 +0100 Subject: timer: kernel/timer.c section fixes This patch fixes the following section mismatches with CONFIG_HOTPLUG=n, CONFIG_HOTPLUG_CPU=y: ... WARNING: vmlinux.o(.text+0x41cd3): Section mismatch: reference to .init.data:tvec_base_done.22610 (between 'timer_cpu_notify' and 'run_timer_softirq') WARNING: vmlinux.o(.text+0x41d67): Section mismatch: reference to .init.data:tvec_base_done.22610 (between 'timer_cpu_notify' and 'run_timer_softirq') ... Signed-off-by: Adrian Bunk Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/timer.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/timer.c b/kernel/timer.c index a05817c021d6..d4527dcef1af 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -1219,11 +1219,11 @@ asmlinkage long sys_sysinfo(struct sysinfo __user *info) */ static struct lock_class_key base_lock_keys[NR_CPUS]; -static int __devinit init_timers_cpu(int cpu) +static int __cpuinit init_timers_cpu(int cpu) { int j; tvec_base_t *base; - static char __devinitdata tvec_base_done[NR_CPUS]; + static char __cpuinitdata tvec_base_done[NR_CPUS]; if (!tvec_base_done[cpu]) { static char boot_done; -- cgit v1.2.3-59-g8ed1b From 29b6cd794e73eea7600541d06288a09861ffecb0 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Tue, 18 Dec 2007 18:05:58 +0100 Subject: x86: jprobe bugfix jprobe for x86-64 may cause kernel page fault when the jprobe_return() is called from incorrect function. - Use jprobe_saved_regs instead getting it from stack. (Especially on x86-64, it may get incorrect data, because pt_regs can not be get by using container_of(rsp)) - Change the type of stack pointer to unsigned long *. Signed-off-by: Masami Hiramatsu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/kprobes_32.c | 4 +--- arch/x86/kernel/kprobes_64.c | 6 ++---- include/asm-x86/kprobes_32.h | 2 +- include/asm-x86/kprobes_64.h | 2 +- 4 files changed, 5 insertions(+), 9 deletions(-) diff --git a/arch/x86/kernel/kprobes_32.c b/arch/x86/kernel/kprobes_32.c index d87a523070d1..3a020f79f82b 100644 --- a/arch/x86/kernel/kprobes_32.c +++ b/arch/x86/kernel/kprobes_32.c @@ -727,9 +727,7 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) if ((addr > (u8 *) jprobe_return) && (addr < (u8 *) jprobe_return_end)) { if (®s->esp != kcb->jprobe_saved_esp) { - struct pt_regs *saved_regs = - container_of(kcb->jprobe_saved_esp, - struct pt_regs, esp); + struct pt_regs *saved_regs = &kcb->jprobe_saved_regs; printk("current esp %p does not match saved esp %p\n", ®s->esp, kcb->jprobe_saved_esp); printk("Saved registers for jprobe %p\n", jp); diff --git a/arch/x86/kernel/kprobes_64.c b/arch/x86/kernel/kprobes_64.c index 0c467644589c..a575059fb420 100644 --- a/arch/x86/kernel/kprobes_64.c +++ b/arch/x86/kernel/kprobes_64.c @@ -716,10 +716,8 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) struct jprobe *jp = container_of(p, struct jprobe, kp); if ((addr > (u8 *) jprobe_return) && (addr < (u8 *) jprobe_return_end)) { - if ((long *)regs->rsp != kcb->jprobe_saved_rsp) { - struct pt_regs *saved_regs = - container_of(kcb->jprobe_saved_rsp, - struct pt_regs, rsp); + if ((unsigned long *)regs->rsp != kcb->jprobe_saved_rsp) { + struct pt_regs *saved_regs = &kcb->jprobe_saved_regs; printk("current rsp %p does not match saved rsp %p\n", (long *)regs->rsp, kcb->jprobe_saved_rsp); printk("Saved registers for jprobe %p\n", jp); diff --git a/include/asm-x86/kprobes_32.h b/include/asm-x86/kprobes_32.h index b772d5b38685..9fe8f3bddfd5 100644 --- a/include/asm-x86/kprobes_32.h +++ b/include/asm-x86/kprobes_32.h @@ -73,7 +73,7 @@ struct kprobe_ctlblk { unsigned long kprobe_status; unsigned long kprobe_old_eflags; unsigned long kprobe_saved_eflags; - long *jprobe_saved_esp; + unsigned long *jprobe_saved_esp; struct pt_regs jprobe_saved_regs; kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE]; struct prev_kprobe prev_kprobe; diff --git a/include/asm-x86/kprobes_64.h b/include/asm-x86/kprobes_64.h index 53f4d8507354..743d76218fc9 100644 --- a/include/asm-x86/kprobes_64.h +++ b/include/asm-x86/kprobes_64.h @@ -66,7 +66,7 @@ struct kprobe_ctlblk { unsigned long kprobe_status; unsigned long kprobe_old_rflags; unsigned long kprobe_saved_rflags; - long *jprobe_saved_rsp; + unsigned long *jprobe_saved_rsp; struct pt_regs jprobe_saved_regs; kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE]; struct prev_kprobe prev_kprobe; -- cgit v1.2.3-59-g8ed1b From 0b0122faf4833548072d23f3c3063c23bc289746 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Tue, 18 Dec 2007 18:05:58 +0100 Subject: x86: kprobes bugfix Kprobes for x86-64 may cause a kernel crash if it inserted on "iret" instruction. "call absolute" is invalid on x86-64, so we don't need treat it. - Change the processing order as same as x86-32. - Add "iret"(0xcf) case. - Remove next_rip local variable. Signed-off-by: Masami Hiramatsu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/kprobes_64.c | 41 ++++++++++++++++++----------------------- 1 file changed, 18 insertions(+), 23 deletions(-) diff --git a/arch/x86/kernel/kprobes_64.c b/arch/x86/kernel/kprobes_64.c index a575059fb420..5df19a9f9239 100644 --- a/arch/x86/kernel/kprobes_64.c +++ b/arch/x86/kernel/kprobes_64.c @@ -485,7 +485,6 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb) { unsigned long *tos = (unsigned long *)regs->rsp; - unsigned long next_rip = 0; unsigned long copy_rip = (unsigned long)p->ainsn.insn; unsigned long orig_rip = (unsigned long)p->addr; kprobe_opcode_t *insn = p->ainsn.insn; @@ -494,46 +493,42 @@ static void __kprobes resume_execution(struct kprobe *p, if (*insn >= 0x40 && *insn <= 0x4f) insn++; + regs->eflags &= ~TF_MASK; switch (*insn) { - case 0x9c: /* pushfl */ + case 0x9c: /* pushfl */ *tos &= ~(TF_MASK | IF_MASK); *tos |= kcb->kprobe_old_rflags; break; - case 0xc3: /* ret/lret */ - case 0xcb: - case 0xc2: + case 0xc2: /* iret/ret/lret */ + case 0xc3: case 0xca: - regs->eflags &= ~TF_MASK; - /* rip is already adjusted, no more changes required*/ - return; - case 0xe8: /* call relative - Fix return addr */ + case 0xcb: + case 0xcf: + case 0xea: /* jmp absolute -- ip is correct */ + /* ip is already adjusted, no more changes required */ + goto no_change; + case 0xe8: /* call relative - Fix return addr */ *tos = orig_rip + (*tos - copy_rip); break; case 0xff: if ((insn[1] & 0x30) == 0x10) { /* call absolute, indirect */ - /* Fix return addr; rip is correct. */ - next_rip = regs->rip; + /* Fix return addr; ip is correct. */ *tos = orig_rip + (*tos - copy_rip); + goto no_change; } else if (((insn[1] & 0x31) == 0x20) || /* jmp near, absolute indirect */ ((insn[1] & 0x31) == 0x21)) { /* jmp far, absolute indirect */ - /* rip is correct. */ - next_rip = regs->rip; + /* ip is correct. */ + goto no_change; } - break; - case 0xea: /* jmp absolute -- rip is correct */ - next_rip = regs->rip; - break; default: break; } - regs->eflags &= ~TF_MASK; - if (next_rip) { - regs->rip = next_rip; - } else { - regs->rip = orig_rip + (regs->rip - copy_rip); - } + regs->rip = orig_rip + (regs->rip - copy_rip); +no_change: + + return; } int __kprobes post_kprobe_handler(struct pt_regs *regs) -- cgit v1.2.3-59-g8ed1b From 213fde71024223abcdd7d9e5349d1ea2679227b5 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 18 Dec 2007 18:05:58 +0100 Subject: x86: also define AT_VECTOR_SIZE_ARCH The patch introducing this left out 64-bit x86 despite it also having extra entries. this solves Xen guest troubles. Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/system_64.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/include/asm-x86/system_64.h b/include/asm-x86/system_64.h index 4cb23848d460..6e9e4841a2da 100644 --- a/include/asm-x86/system_64.h +++ b/include/asm-x86/system_64.h @@ -7,6 +7,13 @@ #ifdef __KERNEL__ +/* entries in ARCH_DLINFO: */ +#ifdef CONFIG_IA32_EMULATION +# define AT_VECTOR_SIZE_ARCH 2 +#else +# define AT_VECTOR_SIZE_ARCH 1 +#endif + #define __SAVE(reg,offset) "movq %%" #reg ",(14-" #offset ")*8(%%rsp)\n\t" #define __RESTORE(reg,offset) "movq (14-" #offset ")*8(%%rsp),%%" #reg "\n\t" -- cgit v1.2.3-59-g8ed1b From 971e5b35fb02c5088d49e6c024aab73582a35b71 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 18 Dec 2007 18:05:58 +0100 Subject: genirq: revert lazy irq disable for simple irqs In commit 76d2160147f43f982dfe881404cfde9fd0a9da21 lazy irq disabling was implemented, and the simple irq handler had a masking set to it. Remy Bohmer discovered that some devices in the ARM architecture would trigger the mask, but never unmask it. His patch to do the unmasking was questioned by Russell King about masking simple irqs to begin with. Looking further, it was discovered that the problems Remy was seeing was due to improper use of the simple handler by devices, and he later submitted patches to fix those. But the issue that was uncovered was that the simple handler should never mask. This patch reverts the masking in the simple handler. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner Acked-by: Russell King --- kernel/irq/chip.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c index 9b5dff6b3f6a..44019ce30a14 100644 --- a/kernel/irq/chip.c +++ b/kernel/irq/chip.c @@ -297,18 +297,13 @@ handle_simple_irq(unsigned int irq, struct irq_desc *desc) if (unlikely(desc->status & IRQ_INPROGRESS)) goto out_unlock; + desc->status &= ~(IRQ_REPLAY | IRQ_WAITING); kstat_cpu(cpu).irqs[irq]++; action = desc->action; - if (unlikely(!action || (desc->status & IRQ_DISABLED))) { - if (desc->chip->mask) - desc->chip->mask(irq); - desc->status &= ~(IRQ_REPLAY | IRQ_WAITING); - desc->status |= IRQ_PENDING; + if (unlikely(!action || (desc->status & IRQ_DISABLED))) goto out_unlock; - } - desc->status &= ~(IRQ_REPLAY | IRQ_WAITING | IRQ_PENDING); desc->status |= IRQ_INPROGRESS; spin_unlock(&desc->lock); -- cgit v1.2.3-59-g8ed1b From 4aae07025265151e3f7041dfbf0f529e122de1d8 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 18 Dec 2007 18:05:58 +0100 Subject: x86: fix "Kernel panic - not syncing: IO-APIC + timer doesn't work!" this is the tale of a full day spent debugging an ancient but elusive bug. after booting up thousands of random .config kernels, i finally happened to generate a .config that produced the following rare bootup failure on 32-bit x86: | ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 | ..MP-BIOS bug: 8254 timer not connected to IO-APIC | ...trying to set up timer (IRQ0) through the 8259A ... failed. | ...trying to set up timer as Virtual Wire IRQ... failed. | ...trying to set up timer as ExtINT IRQ... failed :(. | Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug | and send a report. Then try booting with the 'noapic' option this bug has been reported many times during the years, but it was never reproduced nor fixed. the bug that i hit was extremely sensitive to .config details. First i did a .config-bisection - suspecting some .config detail. That led to CONFIG_X86_MCE: enabling X86_MCE magically made the bug disappear and the system would boot up just fine. Debugging my way through the MCE code ended up identifying two unlikely candidates: the thing that made a real difference to the hang was that X86_MCE did two printks: Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. Adding the same printks to a !CONFIG_X86_MCE kernel made the bug go away! this left timing as the main suspect: i experimented with adding various udelay()s to the arch/x86/kernel/io_apic_32.c:check_timer() function, and the race window turned out to be narrower than 30 microseconds (!). That made debugging especially funny, debugging without having printk ability before the bug hits is ... interesting ;-) eventually i started suspecting IRQ activities - those are pretty much the only thing that happen this early during bootup and have the timescale of a few dozen microseconds. Also, check_timer() changes the IRQ hardware in various creative ways, so the main candidate became IRQ0 interaction. i've added a counter to track timer irqs (on which core they arrived, at what exact time, etc.) and found that no timer IRQ would arrive after the bug condition hits - even if we re-enable IRQ0 and re-initialize the i8259A, but that we'd get a small number of timer irqs right around the time when we call the check_timer() function. Eventually i got the following backtrace triggered from debug code in the timer interrupt: ...trying to set up timer as Virtual Wire IRQ... failed. ...trying to set up timer as ExtINT IRQ... Pid: 1, comm: swapper Not tainted (2.6.24-rc5 #57) EIP: 0060:[] EFLAGS: 00000246 CPU: 0 EIP is at _spin_unlock_irqrestore+0x5/0x1c EAX: c0634178 EBX: 00000000 ECX: c4947d63 EDX: 00000246 ESI: 00000002 EDI: 00010031 EBP: c04e0f2e ESP: f7c41df4 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 CR0: 8005003b CR2: ffe04000 CR3: 00630000 CR4: 000006d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 [] setup_IO_APIC+0x9c3/0xc5c the spin_unlock() was called from init_8259A(). Wait ... we have an IRQ0 entry while we are in the middle of setting up the local APIC, the i8259A and the PIT?? That is certainly not how it's supposed to work! check_timer() was supposed to be called with irqs turned off - but this eroded away sometime in the past. This code would still work most of the time because this code runs very quickly, but just the right timing conditions are present and IRQ0 hits in this small, ~30 usecs window, timer irqs stop and the system does not boot up. Also, given how early this is during bootup, the hang is very deterministic - but it would only occur on certain machines (and certain configs). The fix was quite simple: disable/restore interrupts properly in this function. With that in place the test-system now boots up just fine. (64-bit x86 io_apic_64.c had the same bug.) Phew! One down, only 1500 other kernel bugs are left ;-) Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/io_apic_32.c | 16 ++++++++++++---- arch/x86/kernel/io_apic_64.c | 16 ++++++++++++---- 2 files changed, 24 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 6cf27319a91c..c3a565bba106 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -1882,13 +1882,16 @@ __setup("no_timer_check", notimercheck); static int __init timer_irq_works(void) { unsigned long t1 = jiffies; + unsigned long flags; if (no_timer_check) return 1; + local_save_flags(flags); local_irq_enable(); /* Let ten ticks pass... */ mdelay((10 * 1000) / HZ); + local_irq_restore(flags); /* * Expect a few ticks at least, to be sure some possible @@ -2167,6 +2170,9 @@ static inline void __init check_timer(void) int apic1, pin1, apic2, pin2; int vector; unsigned int ver; + unsigned long flags; + + local_irq_save(flags); ver = apic_read(APIC_LVR); ver = GET_APIC_VERSION(ver); @@ -2219,7 +2225,7 @@ static inline void __init check_timer(void) } if (disable_timer_pin_1 > 0) clear_IO_APIC_pin(0, pin1); - return; + goto out; } clear_IO_APIC_pin(apic1, pin1); printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to " @@ -2242,7 +2248,7 @@ static inline void __init check_timer(void) if (nmi_watchdog == NMI_IO_APIC) { setup_nmi(); } - return; + goto out; } /* * Cleanup, just in case ... @@ -2266,7 +2272,7 @@ static inline void __init check_timer(void) if (timer_irq_works()) { printk(" works.\n"); - return; + goto out; } apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector); printk(" failed.\n"); @@ -2282,11 +2288,13 @@ static inline void __init check_timer(void) if (timer_irq_works()) { printk(" works.\n"); - return; + goto out; } printk(" failed :(.\n"); panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a " "report. Then try booting with the 'noapic' option"); +out: + local_irq_restore(flags); } /* diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index 435a8c9b55f8..cbac1670c7c3 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -1281,10 +1281,13 @@ void disable_IO_APIC(void) static int __init timer_irq_works(void) { unsigned long t1 = jiffies; + unsigned long flags; + local_save_flags(flags); local_irq_enable(); /* Let ten ticks pass... */ mdelay((10 * 1000) / HZ); + local_irq_restore(flags); /* * Expect a few ticks at least, to be sure some possible @@ -1655,6 +1658,9 @@ static inline void check_timer(void) { struct irq_cfg *cfg = irq_cfg + 0; int apic1, pin1, apic2, pin2; + unsigned long flags; + + local_irq_save(flags); /* * get/set the timer IRQ vector: @@ -1696,7 +1702,7 @@ static inline void check_timer(void) } if (disable_timer_pin_1 > 0) clear_IO_APIC_pin(0, pin1); - return; + goto out; } clear_IO_APIC_pin(apic1, pin1); apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: 8254 timer not " @@ -1718,7 +1724,7 @@ static inline void check_timer(void) if (nmi_watchdog == NMI_IO_APIC) { setup_nmi(); } - return; + goto out; } /* * Cleanup, just in case ... @@ -1741,7 +1747,7 @@ static inline void check_timer(void) if (timer_irq_works()) { apic_printk(APIC_VERBOSE," works.\n"); - return; + goto out; } apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector); apic_printk(APIC_VERBOSE," failed.\n"); @@ -1756,10 +1762,12 @@ static inline void check_timer(void) if (timer_irq_works()) { apic_printk(APIC_VERBOSE," works.\n"); - return; + goto out; } apic_printk(APIC_VERBOSE," failed :(.\n"); panic("IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter\n"); +out: + local_irq_restore(flags); } static int __init notimercheck(char *s) -- cgit v1.2.3-59-g8ed1b From 7ee2413ca0da80c819f2388c0faeffce1ac8513b Mon Sep 17 00:00:00 2001 From: Tony Battersby Date: Tue, 6 Nov 2007 14:40:54 -0500 Subject: [SCSI] sym53c8xx: fix free_irq() regression The following commit changed the pointer passed to request_irq(), but failed to change the pointer passed to free_irq(): commit 99c9e0a1d6cfe1ba1169a7a81435ee85bc00e4a1 Author: Matthew Wilcox Date: Fri Oct 5 15:55:12 2007 -0400 [SCSI] sym53c8xx: Make interrupt handler capable of returning IRQ_NONE ... The result is that free_irq() doesn't actually take any action. This patch fixes it. Signed-off-by: Tony Battersby Acked-by: Christoph Hellwig Signed-off-by: James Bottomley --- drivers/scsi/sym53c8xx_2/sym_glue.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index 0f74aba5b237..9e0908d1981a 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -1243,7 +1243,7 @@ static void sym_free_resources(struct sym_hcb *np, struct pci_dev *pdev) * Free O/S specific resources. */ if (pdev->irq) - free_irq(pdev->irq, np); + free_irq(pdev->irq, np->s.host); if (np->s.ioaddr) pci_iounmap(pdev, np->s.ioaddr); if (np->s.ramaddr) -- cgit v1.2.3-59-g8ed1b From c80ddf00cde4c21018dbd0ea2872736c90c7dda2 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Wed, 12 Dec 2007 15:06:21 -0500 Subject: [SCSI] dpt_i2o: driver is only 32 bit so don't set 64 bit DMA mask This fixes a potential corruption bug where the truncation would cause reading or writing to the wrong memory area on machines with >4GB of main memory. Cc: Stable Kernel Tree Signed-off-by: James Bottomley --- drivers/scsi/dpt_i2o.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c index 70f48a1a6d58..b31d1c95c9fb 100644 --- a/drivers/scsi/dpt_i2o.c +++ b/drivers/scsi/dpt_i2o.c @@ -906,8 +906,7 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev } pci_set_master(pDev); - if (pci_set_dma_mask(pDev, DMA_64BIT_MASK) && - pci_set_dma_mask(pDev, DMA_32BIT_MASK)) + if (pci_set_dma_mask(pDev, DMA_32BIT_MASK)) return -EINVAL; base_addr0_phys = pci_resource_start(pDev,0); -- cgit v1.2.3-59-g8ed1b From cedefa13db502432905c29819c195f46805b13eb Mon Sep 17 00:00:00 2001 From: Tony Battersby Date: Fri, 14 Dec 2007 15:45:16 -0500 Subject: [SCSI] sym53c8xx: fix "irq X: nobody cared" regression The patch described by the following excerpt from ChangeLog-2.6.24-rc1 eventually causes a "irq X: nobody cared" error after a while: commit 99c9e0a1d6cfe1ba1169a7a81435ee85bc00e4a1 Author: Matthew Wilcox Date: Fri Oct 5 15:55:12 2007 -0400 [SCSI] sym53c8xx: Make interrupt handler capable of returning IRQ_NONE After this happens, the kernel disables the IRQ, causing the SCSI card to stop working until the next reboot. The problem is caused by the interrupt handler returning IRQ_NONE instead of IRQ_HANDLED after handling an interrupt-on-the-fly (INTF) condition. The following patch fixes the problem. Signed-off-by: Tony Battersby Acked-by: Matthew Wilcox Signed-off-by: James Bottomley --- drivers/scsi/sym53c8xx_2/sym_hipd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index 463f119f20e9..254bdaeb35ff 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -2791,7 +2791,7 @@ irqreturn_t sym_interrupt(struct Scsi_Host *shost) istat = INB(np, nc_istat); if (istat & INTF) { OUTB(np, nc_istat, (istat & SIGP) | INTF | np->istat_sem); - istat = INB(np, nc_istat); /* DUMMY READ */ + istat |= INB(np, nc_istat); /* DUMMY READ */ if (DEBUG_FLAGS & DEBUG_TINY) printf ("F "); sym_wakeup_done(np); } -- cgit v1.2.3-59-g8ed1b From 99f1f534922a2f2251ba05b14657a1c62882a80e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 13 Dec 2007 16:14:05 -0800 Subject: [SCSI] initio: fix conflict when loading driver > I have a scanner connected to a Initio INI-950 SCSI card and I recently > upgraded from SuSE 10.2 to 10.3. The new kernel doesn't see any of my > devices. I get the following in /var/log/messages: > > ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 16 > initio: I/O port range 0x0 is busy. > ACPI: PCI interrupt for device 0000:00:0a.0 disabled Humm not a collision - thats a bug in the driver updating. Looks like the changes I made and combined with Christoph's lost a line somewhere when I was merging it all. Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- drivers/scsi/initio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c index 4c4465d39a1d..769a7a805859 100644 --- a/drivers/scsi/initio.c +++ b/drivers/scsi/initio.c @@ -2867,6 +2867,7 @@ static int initio_probe_one(struct pci_dev *pdev, } host = (struct initio_host *)shost->hostdata; memset(host, 0, sizeof(struct initio_host)); + host->addr = pci_resource_start(pdev, 0); if (!request_region(host->addr, 256, "i91u")) { printk(KERN_WARNING "initio: I/O port range 0x%x is busy.\n", host->addr); -- cgit v1.2.3-59-g8ed1b From cd81621c5c5c869b848818b506962dab4499e0d9 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Sat, 15 Dec 2007 15:51:55 +0900 Subject: [SCSI] st: fix kernel BUG at include/linux/scatterlist.h:59! This is caused by a missing scatterlist initialisation (it only shows up when sg list handling debugging is turned on). Signed-off-by: FUJITA Tomonori Cc: Kai Makisara Signed-off-by: James Bottomley --- drivers/scsi/st.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 98dfd6ea209c..328c47c6aeb1 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -3611,6 +3611,7 @@ static struct st_buffer * tb->dma = need_dma; tb->buffer_size = got; + sg_init_table(tb->sg, max_sg); return tb; } -- cgit v1.2.3-59-g8ed1b From a169e63740779f62a9a5ddf0aa61091a393a03c5 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Mon, 17 Dec 2007 18:08:59 +0200 Subject: [SCSI] initio: bugfix for accessors patch patch: [SCSI] initio: convert to use the data buffer accessors had a small but fatal bug in that it didn't increment the pointer into the initio scatterlist descriptors as it looped over the block generated ones. Fixed here. Signed-off-by: Boaz Harrosh Signed-off-by: James Bottomley --- drivers/scsi/initio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c index 769a7a805859..01bf0189367d 100644 --- a/drivers/scsi/initio.c +++ b/drivers/scsi/initio.c @@ -2616,6 +2616,7 @@ static void initio_build_scb(struct initio_host * host, struct scsi_ctrl_blk * c scsi_for_each_sg(cmnd, sglist, cblk->sglen, i) { sg->data = cpu_to_le32((u32)sg_dma_address(sglist)); total_len += sg->len = cpu_to_le32((u32)sg_dma_len(sglist)); + ++sg; } cblk->buflen = (scsi_bufflen(cmnd) > total_len) ? -- cgit v1.2.3-59-g8ed1b From a3ebdb6c423dff420168a3faf25c76e9e5f59258 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Tue, 18 Dec 2007 16:22:46 -0800 Subject: IA64: Slim down __clear_bit_unlock __clear_bit_unlock does not need to perform atomic operations on the variable. Avoid a cmpxchg and simply do a store with release semantics. Add a barrier to be safe that the compiler does not do funky things. Tony: Use intrinsic rather than inline assembler Signed-off-by: Christoph Lameter Acked-by: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Tony Luck --- include/asm-ia64/bitops.h | 17 ++++++++++++++--- include/asm-ia64/gcc_intrin.h | 5 +++++ include/asm-ia64/intel_intrin.h | 3 +++ 3 files changed, 22 insertions(+), 3 deletions(-) diff --git a/include/asm-ia64/bitops.h b/include/asm-ia64/bitops.h index a977affaebec..a1b9719f5fbb 100644 --- a/include/asm-ia64/bitops.h +++ b/include/asm-ia64/bitops.h @@ -124,10 +124,21 @@ clear_bit_unlock (int nr, volatile void *addr) /** * __clear_bit_unlock - Non-atomically clear a bit with release * - * This is like clear_bit_unlock, but the implementation may use a non-atomic - * store (this one uses an atomic, however). + * This is like clear_bit_unlock, but the implementation uses a store + * with release semantics. See also __raw_spin_unlock(). */ -#define __clear_bit_unlock clear_bit_unlock +static __inline__ void +__clear_bit_unlock(int nr, volatile void *addr) +{ + __u32 mask, new; + volatile __u32 *m; + + m = (volatile __u32 *)addr + (nr >> 5); + mask = ~(1 << (nr & 31)); + new = *m & mask; + barrier(); + ia64_st4_rel_nta(m, new); +} /** * __clear_bit - Clears a bit in memory (non-atomic version) diff --git a/include/asm-ia64/gcc_intrin.h b/include/asm-ia64/gcc_intrin.h index 4fb4e439b05c..e58d3298fa10 100644 --- a/include/asm-ia64/gcc_intrin.h +++ b/include/asm-ia64/gcc_intrin.h @@ -191,6 +191,11 @@ register unsigned long ia64_r13 asm ("r13") __attribute_used__; asm volatile ("ldf.fill %0=[%1]" :"=f"(__f__): "r"(x)); \ }) +#define ia64_st4_rel_nta(m, val) \ +({ \ + asm volatile ("st4.rel.nta [%0] = %1\n\t" :: "r"(m), "r"(val)); \ +}) + #define ia64_stfs(x, regnum) \ ({ \ register double __f__ asm ("f"#regnum); \ diff --git a/include/asm-ia64/intel_intrin.h b/include/asm-ia64/intel_intrin.h index d069b6acddce..a520d103d808 100644 --- a/include/asm-ia64/intel_intrin.h +++ b/include/asm-ia64/intel_intrin.h @@ -110,6 +110,9 @@ #define ia64_st4_rel __st4_rel #define ia64_st8_rel __st8_rel +/* FIXME: need st4.rel.nta intrinsic */ +#define ia64_st4_rel_nta __st4_rel + #define ia64_ld1_acq __ld1_acq #define ia64_ld2_acq __ld2_acq #define ia64_ld4_acq __ld4_acq -- cgit v1.2.3-59-g8ed1b From 2018df76d276bb4fe97b175bd5db0cdd128dfeb4 Mon Sep 17 00:00:00 2001 From: Shi Weihua Date: Thu, 13 Dec 2007 15:58:26 -0800 Subject: [IA64] signal: remove redundant code in setup_sigcontext() This patch removes some redundant code in the function setup_sigcontext(). The registers ar.ccv,b7,r14,ar.csd,ar.ssd,r2-r3 and r16-r31 are not restored in restore_sigcontext() when (flags & IA64_SC_FLAG_IN_SYSCALL) is true. So we don't need to zero those variables in setup_sigcontext(). Signed-off-by: Shi Weihua Signed-off-by: Andrew Morton Signed-off-by: Tony Luck --- arch/ia64/kernel/signal.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c index 4c730099d58f..309da3567bc8 100644 --- a/arch/ia64/kernel/signal.c +++ b/arch/ia64/kernel/signal.c @@ -280,15 +280,7 @@ setup_sigcontext (struct sigcontext __user *sc, sigset_t *mask, struct sigscratc err |= __copy_to_user(&sc->sc_gr[15], &scr->pt.r15, 8); /* r15 */ err |= __put_user(scr->pt.cr_iip + ia64_psr(&scr->pt)->ri, &sc->sc_ip); - if (flags & IA64_SC_FLAG_IN_SYSCALL) { - /* Clear scratch registers if the signal interrupted a system call. */ - err |= __put_user(0, &sc->sc_ar_ccv); /* ar.ccv */ - err |= __put_user(0, &sc->sc_br[7]); /* b7 */ - err |= __put_user(0, &sc->sc_gr[14]); /* r14 */ - err |= __clear_user(&sc->sc_ar25, 2*8); /* ar.csd & ar.ssd */ - err |= __clear_user(&sc->sc_gr[2], 2*8); /* r2-r3 */ - err |= __clear_user(&sc->sc_gr[16], 16*8); /* r16-r31 */ - } else { + if (!(flags & IA64_SC_FLAG_IN_SYSCALL)) { /* Copy scratch regs to sigcontext if the signal didn't interrupt a syscall. */ err |= __put_user(scr->pt.ar_ccv, &sc->sc_ar_ccv); /* ar.ccv */ err |= __put_user(scr->pt.b7, &sc->sc_br[7]); /* b7 */ -- cgit v1.2.3-59-g8ed1b From 3cdc7fc7fd5bd1ead75758dfadef609a6e9fd3de Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Thu, 13 Dec 2007 15:58:27 -0800 Subject: [IA64] ia32 nopage Convert ia64's ia32 support from nopage to fault. Signed-off-by: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Tony Luck --- arch/ia64/ia32/binfmt_elf32.c | 28 ++++++++++++---------------- 1 file changed, 12 insertions(+), 16 deletions(-) diff --git a/arch/ia64/ia32/binfmt_elf32.c b/arch/ia64/ia32/binfmt_elf32.c index f6ae3ec93810..3e35987af458 100644 --- a/arch/ia64/ia32/binfmt_elf32.c +++ b/arch/ia64/ia32/binfmt_elf32.c @@ -52,33 +52,29 @@ extern struct page *ia32_shared_page[]; extern unsigned long *ia32_gdt; extern struct page *ia32_gate_page; -struct page * -ia32_install_shared_page (struct vm_area_struct *vma, unsigned long address, int *type) +int +ia32_install_shared_page (struct vm_area_struct *vma, struct vm_fault *vmf) { - struct page *pg = ia32_shared_page[smp_processor_id()]; - get_page(pg); - if (type) - *type = VM_FAULT_MINOR; - return pg; + vmf->page = ia32_shared_page[smp_processor_id()]; + get_page(vmf->page); + return 0; } -struct page * -ia32_install_gate_page (struct vm_area_struct *vma, unsigned long address, int *type) +int +ia32_install_gate_page (struct vm_area_struct *vma, struct vm_fault *vmf) { - struct page *pg = ia32_gate_page; - get_page(pg); - if (type) - *type = VM_FAULT_MINOR; - return pg; + vmf->page = ia32_gate_page; + get_page(vmf->page); + return 0; } static struct vm_operations_struct ia32_shared_page_vm_ops = { - .nopage = ia32_install_shared_page + .fault = ia32_install_shared_page }; static struct vm_operations_struct ia32_gate_page_vm_ops = { - .nopage = ia32_install_gate_page + .fault = ia32_install_gate_page }; void -- cgit v1.2.3-59-g8ed1b From aec103bfa60e9f72bd66a144236592f54b986a03 Mon Sep 17 00:00:00 2001 From: "de Dinechin, Christophe (Integrity VM)" Date: Thu, 13 Dec 2007 15:03:07 +0000 Subject: [IA64] Avoid unnecessary TLB flushes when allocating memory Improve performance of memory allocations on ia64 by avoiding a global TLB purge to purge a single page from the file cache. This happens whenever we evict a page from the buffer cache to make room for some other allocation. Test case: Run 'find /usr -type f | xargs cat > /dev/null' in the background to fill the buffer cache, then run something that uses memory, e.g. 'gmake -j50 install'. Instrumentation showed that the number of global TLB purges went from a few millions down to about 170 over a 12 hours run of the above. The performance impact is particularly noticeable under virtualization, because a virtual TLB is generally both larger and slower to purge than a physical one. Signed-off-by: Christophe de Dinechin Signed-off-by: Tony Luck --- arch/ia64/mm/tlb.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c index cef164729db7..655da240d13c 100644 --- a/arch/ia64/mm/tlb.c +++ b/arch/ia64/mm/tlb.c @@ -10,6 +10,7 @@ * IPI based ptc implementation and A-step IPI implementation. * Rohit Seth * Ken Chen + * Christophe de Dinechin : Avoid ptc.e on memory allocation */ #include #include @@ -89,9 +90,16 @@ ia64_global_tlb_purge (struct mm_struct *mm, unsigned long start, { static DEFINE_SPINLOCK(ptcg_lock); - if (mm != current->active_mm || !current->mm) { - flush_tlb_all(); - return; + struct mm_struct *active_mm = current->active_mm; + + if (mm != active_mm) { + /* Restore region IDs for mm */ + if (mm && active_mm) { + activate_context(mm); + } else { + flush_tlb_all(); + return; + } } /* HW requires global serialization of ptc.ga. */ @@ -107,6 +115,10 @@ ia64_global_tlb_purge (struct mm_struct *mm, unsigned long start, } while (start < end); } spin_unlock(&ptcg_lock); + + if (mm != active_mm) { + activate_context(active_mm); + } } void -- cgit v1.2.3-59-g8ed1b From 313d8e57b074d5f03dfed2755f21ae41a6f0fd5a Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 18 Dec 2007 17:02:21 -0800 Subject: [IA64] Two trivial spelling fixes s/addres/address/ s/performanc/performance/ Signed-off-by: Joe Perches Signed-off-by: Tony Luck --- arch/ia64/sn/pci/tioce_provider.c | 2 +- include/asm-ia64/hw_irq.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c index cee9379d44e0..e1a3e19d3d9c 100644 --- a/arch/ia64/sn/pci/tioce_provider.c +++ b/arch/ia64/sn/pci/tioce_provider.c @@ -41,7 +41,7 @@ * } else * do desired mmr access * - * According to hw, we can use reads instead of writes to the above addres + * According to hw, we can use reads instead of writes to the above address * * Note this WAR can only to be used for accessing internal MMR's in the * TIOCE Coretalk Address Range 0x0 - 0x07ff_ffff. This includes the diff --git a/include/asm-ia64/hw_irq.h b/include/asm-ia64/hw_irq.h index bba5baa3c7fc..7e6e3779670a 100644 --- a/include/asm-ia64/hw_irq.h +++ b/include/asm-ia64/hw_irq.h @@ -63,7 +63,7 @@ extern int ia64_last_device_vector; #define IA64_NUM_DEVICE_VECTORS (IA64_LAST_DEVICE_VECTOR - IA64_FIRST_DEVICE_VECTOR + 1) #define IA64_MCA_RENDEZ_VECTOR 0xe8 /* MCA rendez interrupt */ -#define IA64_PERFMON_VECTOR 0xee /* performanc monitor interrupt vector */ +#define IA64_PERFMON_VECTOR 0xee /* performance monitor interrupt vector */ #define IA64_TIMER_VECTOR 0xef /* use highest-prio group 15 interrupt for timer */ #define IA64_MCA_WAKEUP_VECTOR 0xf0 /* MCA wakeup (must be >MCA_RENDEZ_VECTOR) */ #define IA64_IPI_LOCAL_TLB_FLUSH 0xfc /* SMP flush local TLB */ -- cgit v1.2.3-59-g8ed1b From ee211b37aa98123b1d9b19d228011e632a4bbe75 Mon Sep 17 00:00:00 2001 From: "Luck, Tony" Date: Tue, 18 Dec 2007 11:46:38 -0800 Subject: [IA64] print kernel release in OOPS to make kerneloops.org happy The ia64 oops message doesn't include the kernel version, which makes it hard to automatically categorize oops messages scraped from mailing lists and bug databases. Signed-off-by: Tony Luck --- arch/ia64/kernel/process.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c index 2418289ee5ca..a70ad185725c 100644 --- a/arch/ia64/kernel/process.c +++ b/arch/ia64/kernel/process.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -107,8 +108,9 @@ show_regs (struct pt_regs *regs) print_modules(); printk("\nPid: %d, CPU %d, comm: %20s\n", task_pid_nr(current), smp_processor_id(), current->comm); - printk("psr : %016lx ifs : %016lx ip : [<%016lx>] %s\n", - regs->cr_ipsr, regs->cr_ifs, ip, print_tainted()); + printk("psr : %016lx ifs : %016lx ip : [<%016lx>] %s (%s)\n", + regs->cr_ipsr, regs->cr_ifs, ip, print_tainted(), + init_utsname()->release); print_symbol("ip is at %s\n", ip); printk("unat: %016lx pfs : %016lx rsc : %016lx\n", regs->ar_unat, regs->ar_pfs, regs->ar_rsc); -- cgit v1.2.3-59-g8ed1b From e384f41409cb9e543fbc84b375e2ba46cbcbec6a Mon Sep 17 00:00:00 2001 From: Ian Wienand Date: Tue, 20 Nov 2007 14:12:46 +1100 Subject: [IA64] set_thread_area fails in IA32 chroot I tried to upgrade an IA32 chroot on my IA64 to a new glibc with TLS. It kept dying because set_thread_area was returning -ESRCH (bugs.debian.org/451939). I instrumented arch/ia64/ia32/sys_ia32.c:get_free_idx() and ended up seeing output like [pid] idx desc->a desc->b ----------------------------- [2710] 0 -> c6b0ffff 40dff31b [2710] 1 -> 0 0 [2710] 2 -> 0 0 [2710] 0 -> c6b0ffff 40dff31b [2710] 1 -> c6b0ffff 40dff31b [2710] 2 -> 0 0 [2711] 0 -> c6b0ffff 40dff31b [2711] 1 -> c6b0ffff 40dff31b [2711] 2 -> 48c0ffff 40dff317 which suggested to me that TLS pointers were surviving exec() calls, leading to GDT pointers filling up and the eventual failure of get_free_idx(). I think the solution is flushing the tls array on exec. Signed-Off-By: Ian Wienand Signed-off-by: Tony Luck --- arch/ia64/kernel/process.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c index a70ad185725c..7377d323131d 100644 --- a/arch/ia64/kernel/process.c +++ b/arch/ia64/kernel/process.c @@ -739,6 +739,7 @@ flush_thread (void) ia32_drop_ia64_partial_page_list(current); current->thread.task_size = IA32_PAGE_OFFSET; set_fs(USER_DS); + memset(current->thread.tls_array, 0, sizeof(current->thread.tls_array)); } #endif } -- cgit v1.2.3-59-g8ed1b From 373167e80c52d65e444dfd40652ca227f5e4c227 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Wed, 22 Aug 2007 19:28:36 +0900 Subject: [IA64] Remove compiler warinings about uninitialized variable in irq_ia64.c This patch removes the following compiler warning messages. CC arch/ia64/kernel/irq_ia64.o arch/ia64/kernel/irq_ia64.c: In function 'create_irq': arch/ia64/kernel/irq_ia64.c:343: warning: 'domain.bits[0u]' may be used uninitialized in this function arch/ia64/kernel/irq_ia64.c: In function 'assign_irq_vector': arch/ia64/kernel/irq_ia64.c:203: warning: 'domain.bits[0u]' may be used uninitialized in this function Signed-off-by: Kenji Kaneshige Signed-off-by: Tony Luck --- arch/ia64/kernel/irq_ia64.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c index 00a4599e5f47..0b52f19ed046 100644 --- a/arch/ia64/kernel/irq_ia64.c +++ b/arch/ia64/kernel/irq_ia64.c @@ -200,7 +200,7 @@ assign_irq_vector (int irq) { unsigned long flags; int vector, cpu; - cpumask_t domain; + cpumask_t domain = CPU_MASK_NONE; vector = -ENOSPC; @@ -340,7 +340,7 @@ int create_irq(void) { unsigned long flags; int irq, vector, cpu; - cpumask_t domain; + cpumask_t domain = CPU_MASK_NONE; irq = vector = -ENOSPC; spin_lock_irqsave(&vector_lock, flags); -- cgit v1.2.3-59-g8ed1b From 091062284c05d13b3393f4fcfcedc0f52cb948b4 Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto Date: Wed, 12 Dec 2007 16:28:52 +0900 Subject: [IA64] Remove assembler warnings on head.S This patch removes the following assembler warning messages. AS arch/ia64/kernel/head.o arch/ia64/kernel/head.S: Assembler messages: arch/ia64/kernel/head.S:1179: Warning: Use of 'ld8' violates RAW dependency 'CR[PTA]' (data) arch/ia64/kernel/head.S:1179: Warning: Only the first path encountering the conflict is reported arch/ia64/kernel/head.S:1178: Warning: This is the location of the conflicting usage arch/ia64/kernel/head.S:1180: Warning: Use of 'ld8' violates RAW dependency 'CR[PTA]' (data) arch/ia64/kernel/head.S:1180: Warning: Only the first path encountering the conflict is reported arch/ia64/kernel/head.S:1178: Warning: This is the location of the conflicting usage : arch/ia64/kernel/head.S:1213: Warning: Use of 'ldf.fill.nta' violates RAW dependency 'CR[PTA]' (data) arch/ia64/kernel/head.S:1213: Warning: Only the first path encountering the conflict is reported arch/ia64/kernel/head.S:1178: Warning: This is the location of the conflicting usage Signed-off-by: Hidetoshi Seto Signed-off-by: Tony Luck --- arch/ia64/kernel/head.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S index 4e5e27540e27..d3a41d5f8d12 100644 --- a/arch/ia64/kernel/head.S +++ b/arch/ia64/kernel/head.S @@ -1176,6 +1176,7 @@ tlb_purge_done: RESTORE_REG(cr.dcr, r25, r17);; RESTORE_REG(cr.iva, r25, r17);; RESTORE_REG(cr.pta, r25, r17);; + srlz.d;; // required not to violate RAW dependency RESTORE_REG(cr.itv, r25, r17);; RESTORE_REG(cr.pmv, r25, r17);; RESTORE_REG(cr.cmcv, r25, r17);; -- cgit v1.2.3-59-g8ed1b From 64135fa97ce016058f95345425a9ebd04ee1bd2a Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Tue, 21 Aug 2007 16:45:12 -0500 Subject: [IA64] Fix Altix BTE error return status The Altix shub2 BTE error detail bits are in a different location than on shub1. The current code does not take this into account resulting in all shub2 BTE failures mapping to "unknown". This patch reads the error detail bits from the proper location, so the correct BTE failure reason is returned for both shub1 and shub2. Signed-off-by: Russ Anderson Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/bte.c | 4 ++-- arch/ia64/sn/kernel/bte_error.c | 8 ++++++-- include/asm-ia64/sn/bte.h | 31 ++++++++++++++++++++++++++++++- include/asm-ia64/sn/xp.h | 27 +++++++++++++++++++++++++-- include/asm-ia64/sn/xpc.h | 8 +++++++- 5 files changed, 70 insertions(+), 8 deletions(-) diff --git a/arch/ia64/sn/kernel/bte.c b/arch/ia64/sn/kernel/bte.c index b362d6d6a8c8..9456d4034024 100644 --- a/arch/ia64/sn/kernel/bte.c +++ b/arch/ia64/sn/kernel/bte.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (c) 2000-2006 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2000-2007 Silicon Graphics, Inc. All Rights Reserved. */ #include @@ -227,7 +227,7 @@ retry_bteop: BTE_LNSTAT_LOAD(bte), *bte->most_rcnt_na)); if (transfer_stat & IBLS_ERROR) { - bte_status = transfer_stat & ~IBLS_ERROR; + bte_status = BTE_GET_ERROR_STATUS(transfer_stat); } else { bte_status = BTE_SUCCESS; } diff --git a/arch/ia64/sn/kernel/bte_error.c b/arch/ia64/sn/kernel/bte_error.c index 27c5936ccfe9..4cb09f3f1efc 100644 --- a/arch/ia64/sn/kernel/bte_error.c +++ b/arch/ia64/sn/kernel/bte_error.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (c) 2000-2005 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2000-2007 Silicon Graphics, Inc. All Rights Reserved. */ #include @@ -148,7 +148,11 @@ int shub2_bte_error_handler(unsigned long _nodepda) for (i = 0; i < BTES_PER_NODE; i++) { bte = &err_nodepda->bte_if[i]; status = BTE_LNSTAT_LOAD(bte); - if ((status & IBLS_ERROR) || !(status & IBLS_BUSY)) + if (status & IBLS_ERROR) { + bte->bh_error = BTE_SHUB2_ERROR(status); + continue; + } + if (!(status & IBLS_BUSY)) continue; mod_timer(recovery_timer, jiffies + (HZ * 5)); BTE_PRINTK(("eh:%p:%d Marked Giving up\n", err_nodepda, diff --git a/include/asm-ia64/sn/bte.h b/include/asm-ia64/sn/bte.h index 5335d87ca5f8..a0d214f43115 100644 --- a/include/asm-ia64/sn/bte.h +++ b/include/asm-ia64/sn/bte.h @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (c) 2000-2006 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2000-2007 Silicon Graphics, Inc. All Rights Reserved. */ @@ -150,6 +150,35 @@ typedef enum { BTEFAIL_NOTAVAIL, /* BTE not available */ } bte_result_t; +#define BTEFAIL_SH2_RESP_SHORT 0x1 /* bit 000001 */ +#define BTEFAIL_SH2_RESP_LONG 0x2 /* bit 000010 */ +#define BTEFAIL_SH2_RESP_DSP 0x4 /* bit 000100 */ +#define BTEFAIL_SH2_RESP_ACCESS 0x8 /* bit 001000 */ +#define BTEFAIL_SH2_CRB_TO 0x10 /* bit 010000 */ +#define BTEFAIL_SH2_NACK_LIMIT 0x20 /* bit 100000 */ +#define BTEFAIL_SH2_ALL 0x3F /* bit 111111 */ + +#define BTE_ERR_BITS 0x3FUL +#define BTE_ERR_SHIFT 36 +#define BTE_ERR_MASK (BTE_ERR_BITS << BTE_ERR_SHIFT) + +#define BTE_ERROR_RETRY(value) \ + (is_shub2() ? (value != BTEFAIL_SH2_CRB_TO) \ + : (value != BTEFAIL_TOUT)) + +/* + * On shub1 BTE_ERR_MASK will always be false, so no need for is_shub2() + */ +#define BTE_SHUB2_ERROR(_status) \ + ((_status & BTE_ERR_MASK) \ + ? (((_status >> BTE_ERR_SHIFT) & BTE_ERR_BITS) | IBLS_ERROR) \ + : _status) + +#define BTE_GET_ERROR_STATUS(_status) \ + (BTE_SHUB2_ERROR(_status) & ~IBLS_ERROR) + +#define BTE_VALID_SH2_ERROR(value) \ + ((value >= BTEFAIL_SH2_RESP_SHORT) && (value <= BTEFAIL_SH2_ALL)) /* * Structure defining a bte. An instance of this diff --git a/include/asm-ia64/sn/xp.h b/include/asm-ia64/sn/xp.h index 6f807e0193b7..f7711b308e48 100644 --- a/include/asm-ia64/sn/xp.h +++ b/include/asm-ia64/sn/xp.h @@ -86,7 +86,7 @@ xp_bte_copy(u64 src, u64 vdst, u64 len, u64 mode, void *notification) BUG_ON(REGION_NUMBER(vdst) != RGN_KERNEL); ret = bte_copy(src, pdst, len, mode, notification); - if (ret != BTE_SUCCESS) { + if ((ret != BTE_SUCCESS) && BTE_ERROR_RETRY(ret)) { if (!in_interrupt()) { cond_resched(); } @@ -244,7 +244,30 @@ enum xpc_retval { xpcDisconnected, /* 51: channel disconnected (closed) */ - xpcUnknownReason /* 52: unknown reason -- must be last in list */ + xpcBteSh2Start, /* 52: BTE CRB timeout */ + + /* 53: 0x1 BTE Error Response Short */ + xpcBteSh2RspShort = xpcBteSh2Start + BTEFAIL_SH2_RESP_SHORT, + + /* 54: 0x2 BTE Error Response Long */ + xpcBteSh2RspLong = xpcBteSh2Start + BTEFAIL_SH2_RESP_LONG, + + /* 56: 0x4 BTE Error Response DSB */ + xpcBteSh2RspDSB = xpcBteSh2Start + BTEFAIL_SH2_RESP_DSP, + + /* 60: 0x8 BTE Error Response Access */ + xpcBteSh2RspAccess = xpcBteSh2Start + BTEFAIL_SH2_RESP_ACCESS, + + /* 68: 0x10 BTE Error CRB timeout */ + xpcBteSh2CRBTO = xpcBteSh2Start + BTEFAIL_SH2_CRB_TO, + + /* 84: 0x20 BTE Error NACK limit */ + xpcBteSh2NACKLimit = xpcBteSh2Start + BTEFAIL_SH2_NACK_LIMIT, + + /* 115: BTE end */ + xpcBteSh2End = xpcBteSh2Start + BTEFAIL_SH2_ALL, + + xpcUnknownReason /* 116: unknown reason -- must be last in list */ }; diff --git a/include/asm-ia64/sn/xpc.h b/include/asm-ia64/sn/xpc.h index e52b8508083b..8e5d7de9c632 100644 --- a/include/asm-ia64/sn/xpc.h +++ b/include/asm-ia64/sn/xpc.h @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (c) 2004-2006 Silicon Graphics, Inc. All Rights Reserved. + * Copyright (c) 2004-2007 Silicon Graphics, Inc. All Rights Reserved. */ @@ -1211,6 +1211,12 @@ xpc_IPI_init(int index) static inline enum xpc_retval xpc_map_bte_errors(bte_result_t error) { + if (is_shub2()) { + if (BTE_VALID_SH2_ERROR(error)) + return xpcBteSh2Start + error; + else + return xpcBteUnmappedError; + } switch (error) { case BTE_SUCCESS: return xpcSuccess; case BTEFAIL_DIR: return xpcBteDirectoryError; -- cgit v1.2.3-59-g8ed1b From 17fbe0043e9d623e46a57b153aa0b80ee9de7790 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Mon, 12 Nov 2007 13:55:21 +0900 Subject: [IA64] Guard elfcorehdr_addr with #if CONFIG_PROC_FS Access to elfcorehdr_addr needs to be guarded by #if CONFIG_PROC_FS as well as the existing #if guards. Fixes the following build problem: arch/ia64/hp/common/built-in.o: In function `sba_init':arch/ia64/hp/common/sba_iommu.c:2043: undefined reference to `elfcorehdr_addr' :arch/ia64/hp/common/sba_iommu.c:2043: undefined reference to `elfcorehdr_addr' Signed-off-by: Simon Horman Signed-off-by: Tony Luck --- arch/ia64/hp/common/sba_iommu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c index bc859a311eaf..45bf04eb7d70 100644 --- a/arch/ia64/hp/common/sba_iommu.c +++ b/arch/ia64/hp/common/sba_iommu.c @@ -2034,7 +2034,8 @@ sba_init(void) if (!ia64_platform_is("hpzx1") && !ia64_platform_is("hpzx1_swiotlb")) return 0; -#if defined(CONFIG_IA64_GENERIC) && defined(CONFIG_CRASH_DUMP) +#if defined(CONFIG_IA64_GENERIC) && defined(CONFIG_CRASH_DUMP) && \ + defined(CONFIG_PROC_FS) /* If we are booting a kdump kernel, the sba_iommu will * cause devices that were not shutdown properly to MCA * as soon as they are turned back on. Our only option for -- cgit v1.2.3-59-g8ed1b From 285fbd66330cd5899f4e607e3e65ab5921ddabf0 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 19 Dec 2007 12:30:30 -0800 Subject: [IA64] make flush_tlb_kernel_range() an inline function This fixes an unused variable warning in mm/vmalloc.c. Tony: also fix resulting fallout in uncached.c with a typo in args to flush_tlb_kernel_range(). Signed-off-by: Jan Beulich Signed-off-by: Tony Luck --- arch/ia64/kernel/uncached.c | 2 +- include/asm-ia64/tlbflush.h | 6 +++++- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/ia64/kernel/uncached.c b/arch/ia64/kernel/uncached.c index a7be4f203420..2a90c32024f4 100644 --- a/arch/ia64/kernel/uncached.c +++ b/arch/ia64/kernel/uncached.c @@ -118,7 +118,7 @@ static int uncached_add_chunk(struct uncached_pool *uc_pool, int nid) for (i = 0; i < (IA64_GRANULE_SIZE / PAGE_SIZE); i++) SetPageUncached(&page[i]); - flush_tlb_kernel_range(uc_addr, uc_adddr + IA64_GRANULE_SIZE); + flush_tlb_kernel_range(uc_addr, uc_addr + IA64_GRANULE_SIZE); status = ia64_pal_prefetch_visibility(PAL_VISIBILITY_PHYSICAL); if (status == PAL_VISIBILITY_OK_REMOTE_NEEDED) { diff --git a/include/asm-ia64/tlbflush.h b/include/asm-ia64/tlbflush.h index 80bcb0a38e8a..7774a1cac0cc 100644 --- a/include/asm-ia64/tlbflush.h +++ b/include/asm-ia64/tlbflush.h @@ -92,6 +92,10 @@ void smp_local_flush_tlb(void); #define smp_local_flush_tlb() #endif -#define flush_tlb_kernel_range(start, end) flush_tlb_all() /* XXX fix me */ +static inline void flush_tlb_kernel_range(unsigned long start, + unsigned long end) +{ + flush_tlb_all(); /* XXX fix me */ +} #endif /* _ASM_IA64_TLBFLUSH_H */ -- cgit v1.2.3-59-g8ed1b From ed5d4026ae6f51bec25e03a891a7d59c492577ab Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto Date: Wed, 19 Dec 2007 11:42:02 -0800 Subject: [IA64] Adjust CMCI mask on CPU hotplug Currently CMCI mask of hot-added CPU is always disabled after CPU hotplug. We should adjust this mask depending on CMC polling state. Signed-off-by: Hidetoshi Seto Signed-off-by: Satoru Takeuchi Signed-off-by: Tony Luck --- arch/ia64/kernel/mca.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 10b48cd15a87..6dbf5919d2d0 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -75,6 +75,7 @@ #include #include #include +#include #include #include @@ -1813,6 +1814,36 @@ ia64_mca_cpu_init(void *cpu_data) PAGE_KERNEL)); } +static void __cpuinit ia64_mca_cmc_vector_adjust(void *dummy) +{ + unsigned long flags; + + local_irq_save(flags); + if (!cmc_polling_enabled) + ia64_mca_cmc_vector_enable(NULL); + local_irq_restore(flags); +} + +static int __cpuinit mca_cpu_callback(struct notifier_block *nfb, + unsigned long action, + void *hcpu) +{ + int hotcpu = (unsigned long) hcpu; + + switch (action) { + case CPU_ONLINE: + case CPU_ONLINE_FROZEN: + smp_call_function_single(hotcpu, ia64_mca_cmc_vector_adjust, + NULL, 1, 0); + break; + } + return NOTIFY_OK; +} + +static struct notifier_block mca_cpu_notifier __cpuinitdata = { + .notifier_call = mca_cpu_callback +}; + /* * ia64_mca_init * @@ -1996,6 +2027,8 @@ ia64_mca_late_init(void) if (!mca_init) return 0; + register_hotcpu_notifier(&mca_cpu_notifier); + /* Setup the CMCI/P vector and handler */ init_timer(&cmc_poll_timer); cmc_poll_timer.function = ia64_mca_cmc_poll; -- cgit v1.2.3-59-g8ed1b From 3a6927906f1b2adf5a31b789322d32eb8559ada0 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 19 Dec 2007 14:05:13 -0800 Subject: Do dirty page accounting when removing a page from the page cache Krzysztof Oledzki noticed a dirty page accounting leak on some of his machines, causing the machine to eventually lock up when the kernel decided that there was too much dirty data, but nobody could actually write anything out to fix it. The culprit turns out to be filesystems (cough ext3 with data=journal cough) that re-dirty the page when the "->invalidatepage()" callback is called. Fix it up by doing a final dirty page accounting check when we actually remove the page from the page cache. This fixes bugzilla entry 9182: http://bugzilla.kernel.org/show_bug.cgi?id=9182 Tested-by: Ingo Molnar Tested-by: Krzysztof Oledzki Cc: Andrew Morton Cc: Nick Piggin Cc: Peter Zijlstra Signed-off-by: Linus Torvalds --- mm/filemap.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/mm/filemap.c b/mm/filemap.c index 188cf5fd3e8d..f4d0cded0e10 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -124,6 +124,18 @@ void __remove_from_page_cache(struct page *page) mapping->nrpages--; __dec_zone_page_state(page, NR_FILE_PAGES); BUG_ON(page_mapped(page)); + + /* + * Some filesystems seem to re-dirty the page even after + * the VM has canceled the dirty bit (eg ext3 journaling). + * + * Fix it up by doing a final dirty accounting check after + * having removed the page entirely. + */ + if (PageDirty(page) && mapping_cap_account_dirty(mapping)) { + dec_zone_page_state(page, NR_FILE_DIRTY); + dec_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE); + } } void remove_from_page_cache(struct page *page) -- cgit v1.2.3-59-g8ed1b From 9ac67a35827ee03d71f2f1c656a725e263b14a7e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 19 Dec 2007 11:16:41 +0100 Subject: ps3fb: Update for firmware 2.10 ps3fb: Update for firmware 2.10 As of PS3 firmware version 2.10, the GPU command buffer size must be at least 2 MiB large. Since we use only a small part of the GPU command buffer and don't want to waste precious XDR memory, move the GPU command buffer back to the start of the XDR memory reserved for ps3fb and let the unused part overlap with the actual frame buffer. Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds --- drivers/video/ps3fb.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/drivers/video/ps3fb.c b/drivers/video/ps3fb.c index 9c56c492a693..614586557cd4 100644 --- a/drivers/video/ps3fb.c +++ b/drivers/video/ps3fb.c @@ -51,7 +51,8 @@ #define L1GPU_DISPLAY_SYNC_HSYNC 1 #define L1GPU_DISPLAY_SYNC_VSYNC 2 -#define GPU_CMD_BUF_SIZE (64 * 1024) +#define GPU_CMD_BUF_SIZE (2 * 1024 * 1024) +#define GPU_FB_START (64 * 1024) #define GPU_IOIF (0x0d000000UL) #define GPU_ALIGN_UP(x) _ALIGN_UP((x), 64) #define GPU_MAX_LINE_LENGTH (65536 - 64) @@ -406,6 +407,7 @@ static void ps3fb_sync_image(struct device *dev, u64 frame_offset, if (src_line_length != dst_line_length) line_length |= (u64)src_line_length << 32; + src_offset += GPU_FB_START; status = lv1_gpu_context_attribute(ps3fb.context_handle, L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT, dst_offset, GPU_IOIF + src_offset, @@ -976,9 +978,8 @@ static int ps3fb_xdr_settings(u64 xdr_lpar, struct device *dev) status = lv1_gpu_context_attribute(ps3fb.context_handle, L1GPU_CONTEXT_ATTRIBUTE_FB_SETUP, - xdr_lpar + ps3fb.xdr_size, - GPU_CMD_BUF_SIZE, - GPU_IOIF + ps3fb.xdr_size, 0); + xdr_lpar, GPU_CMD_BUF_SIZE, + GPU_IOIF, 0); if (status) { dev_err(dev, "%s: lv1_gpu_context_attribute FB_SETUP failed: %d\n", @@ -1061,6 +1062,11 @@ static int __devinit ps3fb_probe(struct ps3_system_bus_device *dev) struct task_struct *task; unsigned long max_ps3fb_size; + if (ps3fb_videomemory.size < GPU_CMD_BUF_SIZE) { + dev_err(&dev->core, "%s: Not enough video memory\n", __func__); + return -ENOMEM; + } + status = ps3_open_hv_device(dev); if (status) { dev_err(&dev->core, "%s: ps3_open_hv_device failed\n", @@ -1131,8 +1137,14 @@ static int __devinit ps3fb_probe(struct ps3_system_bus_device *dev) /* Clear memory to prevent kernel info leakage into userspace */ memset(ps3fb.xdr_ea, 0, ps3fb_videomemory.size); - /* The GPU command buffer is at the end of video memory */ - ps3fb.xdr_size = ps3fb_videomemory.size - GPU_CMD_BUF_SIZE; + /* + * The GPU command buffer is at the start of video memory + * As we don't use the full command buffer, we can put the actual + * frame buffer at offset GPU_FB_START and save some precious XDR + * memory + */ + ps3fb.xdr_ea += GPU_FB_START; + ps3fb.xdr_size = ps3fb_videomemory.size - GPU_FB_START; retval = ps3fb_xdr_settings(xdr_lpar, &dev->core); if (retval) -- cgit v1.2.3-59-g8ed1b From fcbe6e9709f90fd83cfa614a4e0efe83174018ea Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Wed, 19 Dec 2007 11:17:31 +0100 Subject: ps3fb: Fix ps3fb free_irq() dev_id The dev_id arg passed to free_irq() must match that passed to request_irq(). Fixes this PS3 error message: Trying to free already-free IRQ 44 Signed-off-by: Geoff Levand Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds --- drivers/video/ps3fb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/video/ps3fb.c b/drivers/video/ps3fb.c index 614586557cd4..b3128903d673 100644 --- a/drivers/video/ps3fb.c +++ b/drivers/video/ps3fb.c @@ -1212,7 +1212,7 @@ err_fb_dealloc: err_framebuffer_release: framebuffer_release(info); err_free_irq: - free_irq(ps3fb.irq_no, dev); + free_irq(ps3fb.irq_no, &dev->core); ps3_irq_plug_destroy(ps3fb.irq_no); err_iounmap_dinfo: iounmap((u8 __iomem *)ps3fb.dinfo); @@ -1247,7 +1247,7 @@ static int ps3fb_shutdown(struct ps3_system_bus_device *dev) kthread_stop(task); } if (ps3fb.irq_no) { - free_irq(ps3fb.irq_no, dev); + free_irq(ps3fb.irq_no, &dev->core); ps3_irq_plug_destroy(ps3fb.irq_no); } iounmap((u8 __iomem *)ps3fb.dinfo); -- cgit v1.2.3-59-g8ed1b From f941b168a4d7281bf49e166f2febc49470c0149f Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 19 Dec 2007 17:50:32 +0000 Subject: pata_hpt37x: Fix HPT374 detection Bug #9261 Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/ata/pata_hpt37x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 46dc70e0dee7..c79f066c2bc9 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -375,7 +375,7 @@ static int hpt374_pre_reset(struct ata_link *link, unsigned long deadline) pci_write_config_word(pdev, mcrbase + 2, mcr3 | 0x8000); pci_read_config_byte(pdev, 0x5A, &ata66); /* Reset TCBLID/FCBLID to output */ - pci_write_config_word(pdev, 0x52, mcr3); + pci_write_config_word(pdev, mcrbase + 2, mcr3); if (ata66 & (2 >> ap->port_no)) ap->cbl = ATA_CBL_PATA40; -- cgit v1.2.3-59-g8ed1b From d53379832624c0ecab7f46749c8b72e49a88d160 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 19 Dec 2007 23:20:18 +0100 Subject: x86 apic_32.c section fix CONFIG_HOTPLUG_CPU=y: WARNING: vmlinux.o(.text+0x2390d): Section mismatch: reference to .init.text.5:setup_local_APIC (between 'start_secondary' and 'check_tsc_warp') Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/apic_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 96986b46bc85..edb5108e5d0e 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -849,7 +849,7 @@ void __init init_bsp_APIC(void) /** * setup_local_APIC - setup the local APIC */ -void __devinit setup_local_APIC(void) +void __cpuinit setup_local_APIC(void) { unsigned long oldvalue, value, maxlvt, integrated; int i, j; -- cgit v1.2.3-59-g8ed1b From f2206ec92c1bd2145a63b2ef1f6abccd6439fe73 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 19 Dec 2007 23:20:18 +0100 Subject: x86 smpboot_32.c section fixes CONFIG_HOTPLUG_CPU=y: WARNING: vmlinux.o(.text+0x22c60): Section mismatch: reference to .init.data:cpu_idle_tasks (between 'do_boot_cpu' and 'do_warm_boot_cpu') WARNING: vmlinux.o(.text+0x22c99): Section mismatch: reference to .init.data:cpu_idle_tasks (between 'do_boot_cpu' and 'do_warm_boot_cpu') WARNING: vmlinux.o(.text+0x2359b): Section mismatch: reference to .init.data:smp_b_stepping (between 'smp_store_cpu_info' and 'cpu_exit_clear') WARNING: vmlinux.o(.text+0x235a0): Section mismatch: reference to .init.data:smp_b_stepping (between 'smp_store_cpu_info' and 'cpu_exit_clear') Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/smpboot_32.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/smpboot_32.c b/arch/x86/kernel/smpboot_32.c index ef0f34ede1ab..4ea80cbe52e5 100644 --- a/arch/x86/kernel/smpboot_32.c +++ b/arch/x86/kernel/smpboot_32.c @@ -60,7 +60,7 @@ #include /* Set if we find a B stepping CPU */ -static int __devinitdata smp_b_stepping; +static int __cpuinitdata smp_b_stepping; /* Number of siblings per CPU package */ int smp_num_siblings = 1; @@ -745,8 +745,8 @@ static inline int alloc_cpu_id(void) } #ifdef CONFIG_HOTPLUG_CPU -static struct task_struct * __devinitdata cpu_idle_tasks[NR_CPUS]; -static inline struct task_struct * alloc_idle_task(int cpu) +static struct task_struct * __cpuinitdata cpu_idle_tasks[NR_CPUS]; +static inline struct task_struct * __cpuinit alloc_idle_task(int cpu) { struct task_struct *idle; -- cgit v1.2.3-59-g8ed1b From 3446fa057c33b5464ba6891866c24cd57daf023c Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 19 Dec 2007 23:20:18 +0100 Subject: x86_32: select_idle_routine() must be __cpuinit CONFIG_HOTPLUG_CPU=y: WARNING: vmlinux.o(.text+0x1199a): Section mismatch: reference to .init.text.5:select_idle_routine (between 'init_intel' and 'init_nexgen') Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/process_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index 7b899584d290..9663c2a74830 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -261,7 +261,7 @@ static void mwait_idle(void) mwait_idle_with_hints(0, 0); } -void __devinit select_idle_routine(const struct cpuinfo_x86 *c) +void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c) { if (cpu_has(c, X86_FEATURE_MWAIT)) { printk("monitor/mwait feature present.\n"); -- cgit v1.2.3-59-g8ed1b From 3d054f0fade192b454592817c16e0f49e3e295dc Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 19 Dec 2007 23:20:19 +0100 Subject: x86_32: disable_pse must be __cpuinitdata CONFIG_HOTPLUG_CPU=y: WARNING: vmlinux.o(.text+0xfa52): Section mismatch: reference to .init.data:disable_pse (between 'identify_cpu' and 'identify_secondary_cpu') [ akpm@linux-foundation.org: initializer fix. ] Signed-off-by: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/setup_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index e1e18c34c821..9c24b45b513c 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -67,7 +67,7 @@ address, and must not be in the .bss segment! */ unsigned long init_pg_tables_end __initdata = ~0UL; -int disable_pse __devinitdata = 0; +int disable_pse __cpuinitdata = 0; /* * Machine setup.. -- cgit v1.2.3-59-g8ed1b From fbdcf18df73758b2e187ab94678b30cd5f6ff9f9 Mon Sep 17 00:00:00 2001 From: Mike Travis Date: Wed, 19 Dec 2007 23:20:19 +0100 Subject: x86: fix show cpuinfo cpu number always zero when called by setup_arch) after smp_store_cpu_info() had set it to the correct value. The error shows up in 'cat /proc/cpuinfo' will all cpus = 0. Signed-off-by: Mike Travis Cc: Andi Kleen Cc: Christoph Lameter Cc: Jack Steiner Cc: Suresh B Siddha Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/smpboot_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/smpboot_64.c b/arch/x86/kernel/smpboot_64.c index 500670c93d81..594889521da1 100644 --- a/arch/x86/kernel/smpboot_64.c +++ b/arch/x86/kernel/smpboot_64.c @@ -141,8 +141,8 @@ static void __cpuinit smp_store_cpu_info(int id) struct cpuinfo_x86 *c = &cpu_data(id); *c = boot_cpu_data; - c->cpu_index = id; identify_cpu(c); + c->cpu_index = id; print_cpu_info(c); } -- cgit v1.2.3-59-g8ed1b From 67e2be02328b9a61a9c799fbdd4ec94d7da0c323 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 20 Dec 2007 15:01:17 +0100 Subject: sched: rt: account the cpu time during the tick Realtime tasks would not account their runtime during ticks. Which would lead to: struct sched_param param = { .sched_priority = 10 }; pthread_setschedparam(pthread_self(), SCHED_FIFO, ¶m); while (1) ; Not showing up in top. Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/sched_rt.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index ee9c8b6529e9..9ba3daa03475 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -208,6 +208,8 @@ move_one_task_rt(struct rq *this_rq, int this_cpu, struct rq *busiest, static void task_tick_rt(struct rq *rq, struct task_struct *p) { + update_curr_rt(rq); + /* * RR tasks need a special form of timeslice management. * FIFO tasks have no timeslices. -- cgit v1.2.3-59-g8ed1b From 2c3b20e91fe3a083c5d9bc79437c485866ea251c Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Thu, 20 Dec 2007 15:01:17 +0100 Subject: debug: add end-of-oops marker Right now it's nearly impossible for parsers that collect kernel crashes from logs or emails (such as www.kerneloops.org) to detect the end-of-oops condition. In addition, it's not currently possible to detect whether or not 2 oopses that look alike are actually the same oops reported twice, or are truly two unique oopses. This patch adds an end-of-oops marker, and makes the end marker include a very simple 64-bit random ID to be able to detect duplicate reports. Normally, this ID is calculated as a late_initcall() (in the hope that at that time there is enough entropy to get a unique enough ID); however for early oopses the oops_exit() function needs to generate the ID on the fly. We do this all at the _end_ of an oops printout, so this does not impact our ability to get the most important portions of a crash out to the console first. [ Sidenote: the already existing oopses-since-bootup counter we print during crashes serves as the differentiator between multiple oopses that trigger during the same bootup. ] Tested on 32-bit and 64-bit x86. Artificially injected very early crashes as well, as expected they result in this constant ID after multiple bootups: ---[ end trace ca143223eefdc828 ]--- ---[ end trace ca143223eefdc828 ]--- because the random pools are still all zero. But it all still works fine and causes no additional problems (which is the main goal of instrumentation code). Signed-off-by: Arjan van de Ven Signed-off-by: Ingo Molnar --- kernel/panic.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/kernel/panic.c b/kernel/panic.c index 6f6e03e91595..da4d6bac270e 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -19,6 +19,7 @@ #include #include #include +#include int panic_on_oops; int tainted; @@ -265,6 +266,20 @@ void oops_enter(void) do_oops_enter_exit(); } +/* + * 64-bit random ID for oopses: + */ +static u64 oops_id; + +static int init_oops_id(void) +{ + if (!oops_id) + get_random_bytes(&oops_id, sizeof(oops_id)); + + return 0; +} +late_initcall(init_oops_id); + /* * Called when the architecture exits its oops handler, after printing * everything. @@ -272,6 +287,9 @@ void oops_enter(void) void oops_exit(void) { do_oops_enter_exit(); + init_oops_id(); + printk(KERN_WARNING "---[ end trace %016llx ]---\n", + (unsigned long long)oops_id); } #ifdef CONFIG_CC_STACKPROTECTOR -- cgit v1.2.3-59-g8ed1b From 3c378158d4cd2125b42fe2b8bb23d512fdff6fe6 Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Thu, 20 Dec 2007 11:47:07 +0300 Subject: mm: fix exit_mmap BUG() on a.out binary exit The problem was introduced by commit "mm: variable length argument support" (b6a2fea39318e43fee84fa7b0b90d68bed92d2ba) as it didn't update fs/binfmt_aout.c like other binfmt's. I noticed that on alpha when accidentally launched old OSF/1 Acrobat Reader binary. Obviously, other architectures are affected as well. Signed-off-by: Ivan Kokshaysky Cc: Ollie Wild Acked-by: Peter Zijlstra Cc: Andrew Morton Cc: Hugh Dickins Cc: Adrian Bunk Signed-off-by: Linus Torvalds --- fs/binfmt_aout.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/binfmt_aout.c b/fs/binfmt_aout.c index e176d195e7e5..7596e1e94cde 100644 --- a/fs/binfmt_aout.c +++ b/fs/binfmt_aout.c @@ -319,7 +319,6 @@ static int load_aout_binary(struct linux_binprm * bprm, struct pt_regs * regs) current->mm->free_area_cache = current->mm->mmap_base; current->mm->cached_hole_size = 0; - current->mm->mmap = NULL; compute_creds(bprm); current->flags &= ~PF_FORKNOEXEC; #ifdef __sparc__ -- cgit v1.2.3-59-g8ed1b From 512875bd9661368da6f993205a61213b79ba1df0 Mon Sep 17 00:00:00 2001 From: Jun'ichi Nomura Date: Thu, 13 Dec 2007 14:15:25 +0000 Subject: dm: table detect io beyond device This patch fixes a panic on shrinking a DM device if there is outstanding I/O to the part of the device that is being removed. (Normally this doesn't happen - a filesystem would be resized first, for example.) The bug is that __clone_and_map() assumes dm_table_find_target() always returns a valid pointer. It may fail if a bio arrives from the block layer but its target sector is no longer included in the DM btree. This patch appends an empty entry to table->targets[] which will be returned by a lookup beyond the end of the device. After calling dm_table_find_target(), __clone_and_map() and target_message() check for this condition using dm_target_is_valid(). Sample test script to trigger oops: --- drivers/md/dm-ioctl.c | 10 +++------- drivers/md/dm-table.c | 7 ++++++- drivers/md/dm.c | 24 ++++++++++++++++++------ drivers/md/dm.h | 5 +++++ 4 files changed, 32 insertions(+), 14 deletions(-) diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c index 138200bf5e0b..be730fdd4830 100644 --- a/drivers/md/dm-ioctl.c +++ b/drivers/md/dm-ioctl.c @@ -1250,21 +1250,17 @@ static int target_message(struct dm_ioctl *param, size_t param_size) if (!table) goto out_argv; - if (tmsg->sector >= dm_table_get_size(table)) { + ti = dm_table_find_target(table, tmsg->sector); + if (!dm_target_is_valid(ti)) { DMWARN("Target message sector outside device."); r = -EINVAL; - goto out_table; - } - - ti = dm_table_find_target(table, tmsg->sector); - if (ti->type->message) + } else if (ti->type->message) r = ti->type->message(ti, argc, argv); else { DMWARN("Target type does not support messages"); r = -EINVAL; } - out_table: dm_table_put(table); out_argv: kfree(argv); diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index e298d8d11f24..f3f952e347ed 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -189,8 +189,10 @@ static int alloc_targets(struct dm_table *t, unsigned int num) /* * Allocate both the target array and offset array at once. + * Append an empty entry to catch sectors beyond the end of + * the device. */ - n_highs = (sector_t *) dm_vcalloc(num, sizeof(struct dm_target) + + n_highs = (sector_t *) dm_vcalloc(num + 1, sizeof(struct dm_target) + sizeof(sector_t)); if (!n_highs) return -ENOMEM; @@ -867,6 +869,9 @@ struct dm_target *dm_table_get_target(struct dm_table *t, unsigned int index) /* * Search the btree for the correct target. + * + * Caller should check returned pointer with dm_target_is_valid() + * to trap I/O beyond end of device. */ struct dm_target *dm_table_find_target(struct dm_table *t, sector_t sector) { diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 07cbbb8eb3e0..cff2a714c107 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -672,13 +672,19 @@ static struct bio *clone_bio(struct bio *bio, sector_t sector, return clone; } -static void __clone_and_map(struct clone_info *ci) +static int __clone_and_map(struct clone_info *ci) { struct bio *clone, *bio = ci->bio; - struct dm_target *ti = dm_table_find_target(ci->map, ci->sector); - sector_t len = 0, max = max_io_len(ci->md, ci->sector, ti); + struct dm_target *ti; + sector_t len = 0, max; struct dm_target_io *tio; + ti = dm_table_find_target(ci->map, ci->sector); + if (!dm_target_is_valid(ti)) + return -EIO; + + max = max_io_len(ci->md, ci->sector, ti); + /* * Allocate a target io object. */ @@ -736,6 +742,9 @@ static void __clone_and_map(struct clone_info *ci) do { if (offset) { ti = dm_table_find_target(ci->map, ci->sector); + if (!dm_target_is_valid(ti)) + return -EIO; + max = max_io_len(ci->md, ci->sector, ti); tio = alloc_tio(ci->md); @@ -759,6 +768,8 @@ static void __clone_and_map(struct clone_info *ci) ci->idx++; } + + return 0; } /* @@ -767,6 +778,7 @@ static void __clone_and_map(struct clone_info *ci) static int __split_bio(struct mapped_device *md, struct bio *bio) { struct clone_info ci; + int error = 0; ci.map = dm_get_table(md); if (unlikely(!ci.map)) @@ -784,11 +796,11 @@ static int __split_bio(struct mapped_device *md, struct bio *bio) ci.idx = bio->bi_idx; start_io_acct(ci.io); - while (ci.sector_count) - __clone_and_map(&ci); + while (ci.sector_count && !error) + error = __clone_and_map(&ci); /* drop the extra reference count */ - dec_pending(ci.io, 0); + dec_pending(ci.io, error); dm_table_put(ci.map); return 0; diff --git a/drivers/md/dm.h b/drivers/md/dm.h index 4b3faa45277e..177297a88ebd 100644 --- a/drivers/md/dm.h +++ b/drivers/md/dm.h @@ -112,6 +112,11 @@ int dm_table_resume_targets(struct dm_table *t); int dm_table_any_congested(struct dm_table *t, int bdi_bits); void dm_table_unplug_all(struct dm_table *t); +/* + * To check the return value from dm_table_find_target(). + */ +#define dm_target_is_valid(t) ((t)->table) + /*----------------------------------------------------------------- * A registry of target types. *---------------------------------------------------------------*/ -- cgit v1.2.3-59-g8ed1b From d1622e89099b7cdda20d95a68940067bdddda03c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 13 Dec 2007 14:15:43 +0000 Subject: dm mpath: hp requires scsi With CONFIG_SCSI=n __scsi_print_sense() is never linked in. drivers/built-in.o: In function `hp_sw_end_io': dm-mpath-hp-sw.c:(.text+0x914f8): undefined reference to `__scsi_print_sense' Caught with a randconfig on current git. Signed-off-by: Paul Mundt Signed-off-by: Alasdair G Kergon --- drivers/md/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig index 9b6fbf044fd8..3fa7c77d9bd9 100644 --- a/drivers/md/Kconfig +++ b/drivers/md/Kconfig @@ -269,7 +269,7 @@ config DM_MULTIPATH_RDAC config DM_MULTIPATH_HP tristate "HP MSA multipath support (EXPERIMENTAL)" - depends on DM_MULTIPATH && BLK_DEV_DM && EXPERIMENTAL + depends on DM_MULTIPATH && BLK_DEV_DM && SCSI && EXPERIMENTAL ---help--- Multipath support for HP MSA (Active/Passive) series hardware. -- cgit v1.2.3-59-g8ed1b From adfe47702c4726b3e045f9f83178def02833be4c Mon Sep 17 00:00:00 2001 From: Milan Broz Date: Thu, 13 Dec 2007 14:15:51 +0000 Subject: dm crypt: fix write endio Fix BIO_UPTODATE test for write io. Cc: stable@kernel.org Cc: dm-crypt@saout.de Signed-off-by: Milan Broz Signed-off-by: Alasdair G Kergon --- drivers/md/dm-crypt.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 28c6ae095c56..30d51a0c0116 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -511,6 +511,9 @@ static void crypt_endio(struct bio *clone, int error) struct crypt_config *cc = io->target->private; unsigned read_io = bio_data_dir(clone) == READ; + if (unlikely(!bio_flagged(clone, BIO_UPTODATE) && !error)) + error = -EIO; + /* * free the processed pages */ @@ -519,10 +522,8 @@ static void crypt_endio(struct bio *clone, int error) goto out; } - if (unlikely(!bio_flagged(clone, BIO_UPTODATE))) { - error = -EIO; + if (unlikely(error)) goto out; - } bio_put(clone); kcryptd_queue_crypt(io); -- cgit v1.2.3-59-g8ed1b From 69267a30bed1fabec658058c63845528a8b813d4 Mon Sep 17 00:00:00 2001 From: Alasdair G Kergon Date: Thu, 13 Dec 2007 14:15:57 +0000 Subject: dm: trigger change uevent on rename Insert a missing KOBJ_CHANGE notification when a device is renamed. Cc: Scott James Remnant Signed-off-by: Alasdair G Kergon --- drivers/md/dm-ioctl.c | 2 ++ drivers/md/dm.c | 7 ++++++- drivers/md/dm.h | 2 ++ 3 files changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c index be730fdd4830..9627fa0f9470 100644 --- a/drivers/md/dm-ioctl.c +++ b/drivers/md/dm-ioctl.c @@ -332,6 +332,8 @@ static int dm_hash_rename(const char *old, const char *new) dm_table_put(table); } + dm_kobject_uevent(hc->md); + dm_put(hc->md); up_write(&_hash_lock); kfree(old_name); diff --git a/drivers/md/dm.c b/drivers/md/dm.c index cff2a714c107..88c0fd657825 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1514,7 +1514,7 @@ int dm_resume(struct mapped_device *md) dm_table_unplug_all(map); - kobject_uevent(&md->disk->kobj, KOBJ_CHANGE); + dm_kobject_uevent(md); r = 0; @@ -1528,6 +1528,11 @@ out: /*----------------------------------------------------------------- * Event notification. *---------------------------------------------------------------*/ +void dm_kobject_uevent(struct mapped_device *md) +{ + kobject_uevent(&md->disk->kobj, KOBJ_CHANGE); +} + uint32_t dm_next_uevent_seq(struct mapped_device *md) { return atomic_add_return(1, &md->uevent_seq); diff --git a/drivers/md/dm.h b/drivers/md/dm.h index 177297a88ebd..b4584a39383b 100644 --- a/drivers/md/dm.h +++ b/drivers/md/dm.h @@ -187,4 +187,6 @@ union map_info *dm_get_mapinfo(struct bio *bio); int dm_open_count(struct mapped_device *md); int dm_lock_for_deletion(struct mapped_device *md); +void dm_kobject_uevent(struct mapped_device *md); + #endif -- cgit v1.2.3-59-g8ed1b From 91212507f93778c09d4c1335207b6f4b995f5ad1 Mon Sep 17 00:00:00 2001 From: Neil Brown Date: Thu, 13 Dec 2007 14:16:04 +0000 Subject: dm: merge max_hw_sector Make sure dm honours max_hw_sectors of underlying devices We still have no firm testing evidence in support of this patch but believe it may help to resolve some bug reports. - agk Signed-off-by: Neil Brown Signed-off-by: Alasdair G Kergon --- drivers/md/dm-table.c | 9 +++++++++ include/linux/device-mapper.h | 1 + 2 files changed, 10 insertions(+) diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index f3f952e347ed..47818d8249cb 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -99,6 +99,9 @@ static void combine_restrictions_low(struct io_restrictions *lhs, lhs->max_segment_size = min_not_zero(lhs->max_segment_size, rhs->max_segment_size); + lhs->max_hw_sectors = + min_not_zero(lhs->max_hw_sectors, rhs->max_hw_sectors); + lhs->seg_boundary_mask = min_not_zero(lhs->seg_boundary_mask, rhs->seg_boundary_mask); @@ -566,6 +569,9 @@ void dm_set_device_limits(struct dm_target *ti, struct block_device *bdev) rs->max_segment_size = min_not_zero(rs->max_segment_size, q->max_segment_size); + rs->max_hw_sectors = + min_not_zero(rs->max_hw_sectors, q->max_hw_sectors); + rs->seg_boundary_mask = min_not_zero(rs->seg_boundary_mask, q->seg_boundary_mask); @@ -703,6 +709,8 @@ static void check_for_valid_limits(struct io_restrictions *rs) { if (!rs->max_sectors) rs->max_sectors = SAFE_MAX_SECTORS; + if (!rs->max_hw_sectors) + rs->max_hw_sectors = SAFE_MAX_SECTORS; if (!rs->max_phys_segments) rs->max_phys_segments = MAX_PHYS_SEGMENTS; if (!rs->max_hw_segments) @@ -901,6 +909,7 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q) q->max_hw_segments = t->limits.max_hw_segments; q->hardsect_size = t->limits.hardsect_size; q->max_segment_size = t->limits.max_segment_size; + q->max_hw_sectors = t->limits.max_hw_sectors; q->seg_boundary_mask = t->limits.seg_boundary_mask; q->bounce_pfn = t->limits.bounce_pfn; if (t->limits.no_cluster) diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index b8b7c51389fe..e765e191663d 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -115,6 +115,7 @@ struct io_restrictions { unsigned short max_hw_segments; unsigned short hardsect_size; unsigned int max_segment_size; + unsigned int max_hw_sectors; unsigned long seg_boundary_mask; unsigned long bounce_pfn; unsigned char no_cluster; /* inverted so that 0 is default */ -- cgit v1.2.3-59-g8ed1b From 91e106259214b40e992a58fb9417da46868e19b2 Mon Sep 17 00:00:00 2001 From: Milan Broz Date: Thu, 13 Dec 2007 14:16:10 +0000 Subject: dm crypt: use bio_add_page Fix possible max_phys_segments violation in cloned dm-crypt bio. In write operation dm-crypt needs to allocate new bio request and run crypto operation on this clone. Cloned request has always the same size, but number of physical segments can be increased and violate max_phys_segments restriction. This can lead to data corruption and serious hardware malfunction. This was observed when using XFS over dm-crypt and at least two HBA controller drivers (arcmsr, cciss) recently. Fix it by using bio_add_page() call (which tests for other restrictions too) instead of constructing own biovec. All versions of dm-crypt are affected by this bug. Cc: stable@kernel.org Cc: dm-crypt@saout.de Signed-off-by: Milan Broz Signed-off-by: Alasdair G Kergon --- drivers/md/dm-crypt.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-) diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 30d51a0c0116..6b66ee46b87d 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -398,7 +398,8 @@ static struct bio *crypt_alloc_buffer(struct dm_crypt_io *io, unsigned size) struct bio *clone; unsigned int nr_iovecs = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; gfp_t gfp_mask = GFP_NOIO | __GFP_HIGHMEM; - unsigned int i; + unsigned i, len; + struct page *page; clone = bio_alloc_bioset(GFP_NOIO, nr_iovecs, cc->bs); if (!clone) @@ -407,10 +408,8 @@ static struct bio *crypt_alloc_buffer(struct dm_crypt_io *io, unsigned size) clone_init(io, clone); for (i = 0; i < nr_iovecs; i++) { - struct bio_vec *bv = bio_iovec_idx(clone, i); - - bv->bv_page = mempool_alloc(cc->page_pool, gfp_mask); - if (!bv->bv_page) + page = mempool_alloc(cc->page_pool, gfp_mask); + if (!page) break; /* @@ -421,15 +420,14 @@ static struct bio *crypt_alloc_buffer(struct dm_crypt_io *io, unsigned size) if (i == (MIN_BIO_PAGES - 1)) gfp_mask = (gfp_mask | __GFP_NOWARN) & ~__GFP_WAIT; - bv->bv_offset = 0; - if (size > PAGE_SIZE) - bv->bv_len = PAGE_SIZE; - else - bv->bv_len = size; + len = (size > PAGE_SIZE) ? PAGE_SIZE : size; + + if (!bio_add_page(clone, page, len, 0)) { + mempool_free(page, cc->page_pool); + break; + } - clone->bi_size += bv->bv_len; - clone->bi_vcnt++; - size -= bv->bv_len; + size -= len; } if (!clone->bi_size) { -- cgit v1.2.3-59-g8ed1b From c0a698b7443a9fce76b0a849f06c45ac78f3b0a0 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 21 Dec 2007 01:27:19 +0100 Subject: x86: fix die() to not be preemptible Andrew "Eagle Eye" Morton noticed that we use raw_local_save_flags() instead of raw_local_irq_save(flags) in die(). This allows the preemption of oopsing contexts - which is highly undesirable. It also causes CONFIG_DEBUG_PREEMPT to complain, as reported by Miles Lane. this bug was introduced via: commit 39743c9ef717fd4f2b5583f010115c5f2482b8ae Author: Andi Kleen Date: Fri Oct 19 20:35:03 2007 +0200 x86: use raw locks during oopses - spin_lock_irqsave(&die.lock, flags); + __raw_spin_lock(&die.lock); + raw_local_save_flags(flags); that is not a correct open-coding of spin_lock_irqsave(): both the ordering is wrong (irqs should be disabled _first_), and the wrong flags-saving API was used. Signed-off-by: Ingo Molnar --- arch/x86/kernel/traps_32.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/traps_32.c b/arch/x86/kernel/traps_32.c index ef6010262597..c88bbffcaa03 100644 --- a/arch/x86/kernel/traps_32.c +++ b/arch/x86/kernel/traps_32.c @@ -373,14 +373,13 @@ void die(const char * str, struct pt_regs * regs, long err) if (die.lock_owner != raw_smp_processor_id()) { console_verbose(); + raw_local_irq_save(flags); __raw_spin_lock(&die.lock); - raw_local_save_flags(flags); die.lock_owner = smp_processor_id(); die.lock_owner_depth = 0; bust_spinlocks(1); - } - else - raw_local_save_flags(flags); + } else + raw_local_irq_save(flags); if (++die.lock_owner_depth < 3) { unsigned long esp; -- cgit v1.2.3-59-g8ed1b From 04fa11ea170afd147b5d1e1ec88ec359a766bf31 Mon Sep 17 00:00:00 2001 From: Jason Gaston Date: Fri, 21 Dec 2007 01:27:19 +0100 Subject: x86: intel_cacheinfo.c: cpu cache info entry for Intel Tolapai This patch adds a cpu cache info entry for the Intel Tolapai cpu. Signed-off-by: Jason Gaston Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/intel_cacheinfo.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 606fe4d55a91..9f530ff43c21 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -49,6 +49,7 @@ static struct _cache_table cache_table[] __cpuinitdata = { 0x3c, LVL_2, 256 }, /* 4-way set assoc, sectored cache, 64 byte line size */ { 0x3d, LVL_2, 384 }, /* 6-way set assoc, sectored cache, 64 byte line size */ { 0x3e, LVL_2, 512 }, /* 4-way set assoc, sectored cache, 64 byte line size */ + { 0x3f, LVL_2, 256 }, /* 2-way set assoc, 64 byte line size */ { 0x41, LVL_2, 128 }, /* 4-way set assoc, 32 byte line size */ { 0x42, LVL_2, 256 }, /* 4-way set assoc, 32 byte line size */ { 0x43, LVL_2, 512 }, /* 4-way set assoc, 32 byte line size */ -- cgit v1.2.3-59-g8ed1b From bad60fdd14df32459e31cc75ab681e4458bf25cf Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 21 Dec 2007 10:58:56 +1100 Subject: [XFS] Fix mknod regression This was broken by my '[XFS] simplify xfs_create/mknod/symlink prototype', which assigned the re-shuffled ondisk dev_t back to the rdev variable in xfs_vn_mknod. Because of that i_rdev is set to the ondisk dev_t instead of the linux dev_t later down the function. Fortunately the fix for it is trivial: we can just remove the assignment because xfs_revalidate_inode has done the proper job before unlocking the inode. SGI-PV: 974873 SGI-Modid: xfs-linux-melb:xfs-kern:30273a Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_iops.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c index 37e116779eb1..5e8bb7f71b5a 100644 --- a/fs/xfs/linux-2.6/xfs_iops.c +++ b/fs/xfs/linux-2.6/xfs_iops.c @@ -332,9 +332,7 @@ xfs_vn_mknod( ASSERT(vp); ip = vn_to_inode(vp); - if (S_ISCHR(mode) || S_ISBLK(mode)) - ip->i_rdev = rdev; - else if (S_ISDIR(mode)) + if (S_ISDIR(mode)) xfs_validate_fields(ip); d_instantiate(dentry, ip); xfs_validate_fields(dir); -- cgit v1.2.3-59-g8ed1b From 4743e0ec1217fd00f57461ebdd7979d31af18700 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Fri, 21 Dec 2007 11:00:23 +1100 Subject: [XFS] Initialise current offset in xfs_file_readdir correctly After reading the directory contents into the temporary buffer, we grab each dirent and pass it to filldir witht eh current offset of the dirent. The current offset was not being set for the first dirent in the temporary buffer, which coul dresult in bad offsets being set in the f_pos field result in looping and duplicate entries being returned from readdir. SGI-PV: 974905 SGI-Modid: xfs-linux-melb:xfs-kern:30282a Signed-off-by: David Chinner Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_file.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c index e1fcef2eb928..4847eb83fc18 100644 --- a/fs/xfs/linux-2.6/xfs_file.c +++ b/fs/xfs/linux-2.6/xfs_file.c @@ -347,6 +347,7 @@ xfs_file_readdir( size = buf.used; de = (struct hack_dirent *)buf.dirent; + curr_offset = de->offset /* & 0x7fffffff */; while (size > 0) { if (filldir(dirent, de->name, de->namlen, curr_offset & 0x7fffffff, -- cgit v1.2.3-59-g8ed1b From ea67db4cdbbf7f4e74150e71da0984e25121f500 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 20 Dec 2007 17:25:48 -0800 Subject: Linux 2.6.24-rc6 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index c1825aab77e8..fbb8dfc063d3 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 24 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Arr Matey! A Hairy Bilge Rat! # *DOCUMENTATION* -- cgit v1.2.3-59-g8ed1b