From c53653130f2868e44c6e8346d110d27d39e7d07b Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sun, 14 Jan 2007 10:15:00 +0100 Subject: [POWERPC] Remove the broken Gemini support Signed-off-by: Adrian Bunk Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/head_32.S | 5 - arch/powerpc/platforms/embedded6xx/Kconfig | 9 - arch/ppc/Kconfig | 9 - arch/ppc/boot/simple/Makefile | 4 - arch/ppc/boot/simple/misc.c | 15 +- arch/ppc/configs/gemini_defconfig | 618 ----------------------------- arch/ppc/kernel/head.S | 18 - arch/ppc/platforms/Makefile | 1 - arch/ppc/platforms/gemini.h | 165 -------- arch/ppc/platforms/gemini_pci.c | 41 -- arch/ppc/platforms/gemini_prom.S | 90 ----- arch/ppc/platforms/gemini_serial.h | 40 -- arch/ppc/platforms/gemini_setup.c | 577 --------------------------- arch/ppc/syslib/Makefile | 1 - arch/ppc/xmon/start.c | 5 +- include/asm-ppc/m48t35.h | 77 ---- include/asm-ppc/serial.h | 2 - 17 files changed, 2 insertions(+), 1675 deletions(-) delete mode 100644 arch/ppc/configs/gemini_defconfig delete mode 100644 arch/ppc/platforms/gemini.h delete mode 100644 arch/ppc/platforms/gemini_pci.c delete mode 100644 arch/ppc/platforms/gemini_prom.S delete mode 100644 arch/ppc/platforms/gemini_serial.h delete mode 100644 arch/ppc/platforms/gemini_setup.c delete mode 100644 include/asm-ppc/m48t35.h diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index 9417cf5b4b7e..c897203198b1 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -344,12 +344,7 @@ i##n: \ /* System reset */ /* core99 pmac starts the seconary here by changing the vector, and putting it back to what it was (unknown_exception) when done. */ -#if defined(CONFIG_GEMINI) && defined(CONFIG_SMP) - . = 0x100 - b __secondary_start_gemini -#else EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD) -#endif /* Machine check */ /* diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig index b3c2ce4cb7a8..886c522d78e9 100644 --- a/arch/powerpc/platforms/embedded6xx/Kconfig +++ b/arch/powerpc/platforms/embedded6xx/Kconfig @@ -104,15 +104,6 @@ config RADSTONE_PPC7D config PAL4 bool "SBS-Palomar4" -config GEMINI - bool "Synergy-Gemini" - select PPC_INDIRECT_PCI - depends on BROKEN - help - Select Gemini if configuring for a Synergy Microsystems' Gemini - series Single Board Computer. More information is available at: - . - config EST8260 bool "EST8260" ---help--- diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 8eb82efe05a1..c22e60619d9b 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -670,15 +670,6 @@ config RADSTONE_PPC7D config PAL4 bool "SBS-Palomar4" -config GEMINI - bool "Synergy-Gemini" - depends on BROKEN - select PPC_INDIRECT_PCI - help - Select Gemini if configuring for a Synergy Microsystems' Gemini - series Single Board Computer. More information is available at: - . - config EST8260 bool "EST8260" ---help--- diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile index 28be01b99c44..bcfb6cde70c4 100644 --- a/arch/ppc/boot/simple/Makefile +++ b/arch/ppc/boot/simple/Makefile @@ -116,10 +116,6 @@ zimageinitrd-$(CONFIG_WALNUT) := zImage.initrd-TREE extra.o-$(CONFIG_CHESTNUT) := misc-chestnut.o end-$(CONFIG_CHESTNUT) := chestnut - zimage-$(CONFIG_GEMINI) := zImage-STRIPELF -zimageinitrd-$(CONFIG_GEMINI) := zImage.initrd-STRIPELF - end-$(CONFIG_GEMINI) := gemini - extra.o-$(CONFIG_KATANA) := misc-katana.o end-$(CONFIG_KATANA) := katana cacheflag-$(CONFIG_KATANA) := -include $(clear_L2_L3) diff --git a/arch/ppc/boot/simple/misc.c b/arch/ppc/boot/simple/misc.c index a5df08963695..c3d3305eb5ca 100644 --- a/arch/ppc/boot/simple/misc.c +++ b/arch/ppc/boot/simple/misc.c @@ -42,14 +42,11 @@ #endif /* Will / Can the user give input? - * Val Henson has requested that Gemini doesn't wait for the - * user to edit the cmdline or not. */ #if (defined(CONFIG_SERIAL_8250_CONSOLE) \ || defined(CONFIG_VGA_CONSOLE) \ || defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \ - || defined(CONFIG_SERIAL_MPSC_CONSOLE)) \ - && !defined(CONFIG_GEMINI) + || defined(CONFIG_SERIAL_MPSC_CONSOLE)) #define INTERACTIVE_CONSOLE 1 #endif @@ -178,16 +175,6 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum) if (keyb_present) CRT_tstc(); /* Forces keyboard to be initialized */ -#ifdef CONFIG_GEMINI - /* - * If cmd_line is empty and cmd_preset is not, copy cmd_preset - * to cmd_line. This way we can override cmd_preset with the - * command line from Smon. - */ - - if ( (cmd_line[0] == '\0') && (cmd_preset[0] != '\0')) - memcpy (cmd_line, cmd_preset, sizeof(cmd_preset)); -#endif /* Display standard Linux/PPC boot prompt for kernel args */ puts("\nLinux/PPC load: "); diff --git a/arch/ppc/configs/gemini_defconfig b/arch/ppc/configs/gemini_defconfig deleted file mode 100644 index ebcd17b097f1..000000000000 --- a/arch/ppc/configs/gemini_defconfig +++ /dev/null @@ -1,618 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_HAVE_DEC_LOCK=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# General setup -# -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_EMBEDDED is not set -CONFIG_FUTEX=y -CONFIG_EPOLL=y - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Platform support -# -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_6xx=y -# CONFIG_40x is not set -# CONFIG_POWER3 is not set -# CONFIG_8xx is not set - -# -# IBM 4xx options -# -# CONFIG_8260 is not set -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PPC_STD_MMU=y -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_APUS is not set -# CONFIG_WILLOW_2 is not set -# CONFIG_PCORE is not set -# CONFIG_POWERPMC250 is not set -# CONFIG_EV64260 is not set -# CONFIG_SPRUCE is not set -# CONFIG_LOPEC is not set -# CONFIG_MCPN765 is not set -# CONFIG_MVME5100 is not set -# CONFIG_PPLUS is not set -# CONFIG_PRPMC750 is not set -# CONFIG_PRPMC800 is not set -# CONFIG_SANDPOINT is not set -# CONFIG_ADIR is not set -# CONFIG_K2 is not set -# CONFIG_PAL4 is not set -CONFIG_GEMINI=y -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -CONFIG_ALTIVEC=y -CONFIG_TAU=y -# CONFIG_TAU_INT is not set -# CONFIG_TAU_AVERAGE is not set -# CONFIG_CPU_FREQ is not set - -# -# General setup -# -# CONFIG_HIGHMEM is not set -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_KCORE_ELF=y -CONFIG_BINFMT_ELF=y -CONFIG_KERNEL_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y -# CONFIG_HOTPLUG is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set -# CONFIG_PPC601_SYNC_FIX is not set -# CONFIG_CMDLINE_BOOL is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# ATA/IDE/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI support -# -CONFIG_SCSI=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_REPORT_LUNS is not set -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_IN2000 is not set -# CONFIG_SCSI_AM53C974 is not set -# CONFIG_SCSI_MEGARAID is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_CPQFCTS is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_NCR53C7xx is not set -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -# CONFIG_SCSI_PCI2000 is not set -# CONFIG_SCSI_PCI2220I is not set -# CONFIG_SCSI_QLOGIC_ISP is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_U14_34F is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support (EXPERIMENTAL) -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set - -# -# IP: Netfilter Configuration -# -# CONFIG_IP_NF_CONNTRACK is not set -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set -# CONFIG_IP_NF_COMPAT_IPCHAINS is not set -# CONFIG_IP_NF_COMPAT_IPFWADM is not set -# CONFIG_IPV6 is not set -# CONFIG_XFRM_USER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IPV6_SCTP__=y -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_LLC is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_OAKNET is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Token Ring devices (depends on LLC=y) -# -# CONFIG_NET_FC is not set -# CONFIG_RCPCI is not set -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN_BOOL is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Userland interfaces -# - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set - -# -# Input Device Drivers -# - -# -# Macintosh device drivers -# - -# -# Character devices -# -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_UNIX98_PTY_COUNT=256 - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# I2C Hardware Sensors Mainboard support -# - -# -# I2C Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_HANGCHECK_TIMER is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -# CONFIG_JOLIET is not set -# CONFIG_ZISOFS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_FAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -CONFIG_DEVPTS_FS=y -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -CONFIG_NFSD=y -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_LOCKD=y -CONFIG_EXPORTFS=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_GSS is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -CONFIG_SOLARIS_X86_PARTITION=y -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_NEC98_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB is not set -# CONFIG_USB_GADGET is not set - -# -# Bluetooth support -# -# CONFIG_BT is not set - -# -# Library routines -# -# CONFIG_CRC32 is not set - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_KALLSYMS is not set - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set diff --git a/arch/ppc/kernel/head.S b/arch/ppc/kernel/head.S index 100052aaea9a..c7cb9d5f24a3 100644 --- a/arch/ppc/kernel/head.S +++ b/arch/ppc/kernel/head.S @@ -310,12 +310,7 @@ i##n: \ /* System reset */ /* core99 pmac starts the seconary here by changing the vector, and putting it back to what it was (unknown_exception) when done. */ -#if defined(CONFIG_GEMINI) && defined(CONFIG_SMP) - . = 0x100 - b __secondary_start_gemini -#else EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD) -#endif /* Machine check */ . = 0x200 @@ -897,19 +892,6 @@ fix_mem_constants: #endif /* CONFIG_APUS */ #ifdef CONFIG_SMP -#ifdef CONFIG_GEMINI - .globl __secondary_start_gemini -__secondary_start_gemini: - mfspr r4,SPRN_HID0 - ori r4,r4,HID0_ICFI - li r3,0 - ori r3,r3,HID0_ICE - andc r4,r4,r3 - mtspr SPRN_HID0,r4 - sync - b __secondary_start -#endif /* CONFIG_GEMINI */ - .globl __secondary_start_pmac_0 __secondary_start_pmac_0: /* NB the entries for cpus 0, 1, 2 must each occupy 8 bytes. */ diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile index 90c622294423..e17fad470621 100644 --- a/arch/ppc/platforms/Makefile +++ b/arch/ppc/platforms/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_TQM8260) += tqm8260_setup.o obj-$(CONFIG_CPCI690) += cpci690.o obj-$(CONFIG_EV64260) += ev64260.o obj-$(CONFIG_CHESTNUT) += chestnut.o -obj-$(CONFIG_GEMINI) += gemini_pci.o gemini_setup.o gemini_prom.o obj-$(CONFIG_LOPEC) += lopec.o obj-$(CONFIG_KATANA) += katana.o obj-$(CONFIG_HDPU) += hdpu.o diff --git a/arch/ppc/platforms/gemini.h b/arch/ppc/platforms/gemini.h deleted file mode 100644 index 5528fd0a1216..000000000000 --- a/arch/ppc/platforms/gemini.h +++ /dev/null @@ -1,165 +0,0 @@ -/* - * Onboard registers and descriptions for Synergy Microsystems' - * "Gemini" boards. - * - */ -#ifdef __KERNEL__ -#ifndef __PPC_GEMINI_H -#define __PPC_GEMINI_H - -/* Registers */ - -#define GEMINI_SERIAL_B (0xffeffb00) -#define GEMINI_SERIAL_A (0xffeffb08) -#define GEMINI_USWITCH (0xffeffd00) -#define GEMINI_BREV (0xffeffe00) -#define GEMINI_BECO (0xffeffe08) -#define GEMINI_FEAT (0xffeffe10) -#define GEMINI_BSTAT (0xffeffe18) -#define GEMINI_CPUSTAT (0xffeffe20) -#define GEMINI_L2CFG (0xffeffe30) -#define GEMINI_MEMCFG (0xffeffe38) -#define GEMINI_FLROM (0xffeffe40) -#define GEMINI_P0PCI (0xffeffe48) -#define GEMINI_FLWIN (0xffeffe50) -#define GEMINI_P0INTMASK (0xffeffe60) -#define GEMINI_P0INTAP (0xffeffe68) -#define GEMINI_PCIERR (0xffeffe70) -#define GEMINI_LEDBASE (0xffeffe80) -#define GEMINI_RTC (0xffe9fff8) -#define GEMINI_LEDS 8 -#define GEMINI_SWITCHES 8 - - -/* Flash ROM bit definitions */ -#define GEMINI_FLS_WEN (1<<0) -#define GEMINI_FLS_JMP (1<<6) -#define GEMINI_FLS_BOOT (1<<7) - -/* Memory bit definitions */ -#define GEMINI_MEM_TYPE_MASK 0xc0 -#define GEMINI_MEM_SIZE_MASK 0x38 -#define GEMINI_MEM_BANK_MASK 0x07 - -/* L2 cache bit definitions */ -#define GEMINI_L2_SIZE_MASK 0xc0 -#define GEMINI_L2_RATIO_MASK 0x03 - -/* Timebase register bit definitons */ -#define GEMINI_TIMEB0_EN (1<<0) -#define GEMINI_TIMEB1_EN (1<<1) -#define GEMINI_TIMEB2_EN (1<<2) -#define GEMINI_TIMEB3_EN (1<<3) - -/* CPU status bit definitions */ -#define GEMINI_CPU_ID_MASK 0x03 -#define GEMINI_CPU_COUNT_MASK 0x0c -#define GEMINI_CPU0_HALTED (1<<4) -#define GEMINI_CPU1_HALTED (1<<5) -#define GEMINI_CPU2_HALTED (1<<6) -#define GEMINI_CPU3_HALTED (1<<7) - -/* Board status bit definitions */ -#define GEMINI_BRD_FAIL (1<<0) /* FAIL led is lit */ -#define GEMINI_BRD_BUS_MASK 0x0c /* PowerPC bus speed */ - -/* Board family/feature bit descriptions */ -#define GEMINI_FEAT_HAS_FLASH (1<<0) -#define GEMINI_FEAT_HAS_ETH (1<<1) -#define GEMINI_FEAT_HAS_SCSI (1<<2) -#define GEMINI_FEAT_HAS_P0 (1<<3) -#define GEMINI_FEAT_FAM_MASK 0xf0 - -/* Mod/ECO bit definitions */ -#define GEMINI_ECO_LEVEL_MASK 0x0f -#define GEMINI_MOD_MASK 0xf0 - -/* Type/revision bit definitions */ -#define GEMINI_REV_MASK 0x0f -#define GEMINI_TYPE_MASK 0xf0 - -/* User switch definitions */ -#define GEMINI_SWITCH_VERBOSE 1 /* adds "debug" to boot cmd line */ -#define GEMINI_SWITCH_SINGLE_USER 7 /* boots into "single-user" mode */ - -#define SGS_RTC_CONTROL 0 -#define SGS_RTC_SECONDS 1 -#define SGS_RTC_MINUTES 2 -#define SGS_RTC_HOURS 3 -#define SGS_RTC_DAY 4 -#define SGS_RTC_DAY_OF_MONTH 5 -#define SGS_RTC_MONTH 6 -#define SGS_RTC_YEAR 7 - -#define SGS_RTC_SET 0x80 -#define SGS_RTC_IS_STOPPED 0x80 - -#define GRACKLE_CONFIG_ADDR_ADDR (0xfec00000) -#define GRACKLE_CONFIG_DATA_ADDR (0xfee00000) - -#define GEMINI_BOOT_INIT (0xfff00100) - -#ifndef __ASSEMBLY__ - -static inline void grackle_write( unsigned long addr, unsigned long data ) -{ - __asm__ __volatile__( - " stwbrx %1, 0, %0\n \ - sync\n \ - stwbrx %3, 0, %2\n \ - sync " - : /* no output */ - : "r" (GRACKLE_CONFIG_ADDR_ADDR), "r" (addr), - "r" (GRACKLE_CONFIG_DATA_ADDR), "r" (data)); -} - -static inline unsigned long grackle_read( unsigned long addr ) -{ - unsigned long val; - - __asm__ __volatile__( - " stwbrx %1, 0, %2\n \ - sync\n \ - lwbrx %0, 0, %3\n \ - sync " - : "=r" (val) - : "r" (addr), "r" (GRACKLE_CONFIG_ADDR_ADDR), - "r" (GRACKLE_CONFIG_DATA_ADDR)); - - return val; -} - -static inline void gemini_led_on( int led ) -{ - if (led >= 0 && led < GEMINI_LEDS) - *(unsigned char *)(GEMINI_LEDBASE + (led<<3)) = 1; -} - -static inline void gemini_led_off(int led) -{ - if (led >= 0 && led < GEMINI_LEDS) - *(unsigned char *)(GEMINI_LEDBASE + (led<<3)) = 0; -} - -static inline int gemini_led_val(int led) -{ - int val = 0; - if (led >= 0 && led < GEMINI_LEDS) - val = *(unsigned char *)(GEMINI_LEDBASE + (led<<3)); - return (val & 0x1); -} - -/* returns processor id from the board */ -static inline int gemini_processor(void) -{ - unsigned char cpu = *(unsigned char *)(GEMINI_CPUSTAT); - return (int) ((cpu == 0) ? 4 : (cpu & GEMINI_CPU_ID_MASK)); -} - - -extern void _gemini_reboot(void); -extern void gemini_prom_init(void); -extern void gemini_init_l2(void); -#endif /* __ASSEMBLY__ */ -#endif -#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/gemini_pci.c b/arch/ppc/platforms/gemini_pci.c deleted file mode 100644 index 95656091ba2b..000000000000 --- a/arch/ppc/platforms/gemini_pci.c +++ /dev/null @@ -1,41 +0,0 @@ -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -void __init gemini_pcibios_fixup(void) -{ - int i; - struct pci_dev *dev = NULL; - - for_each_pci_dev(dev) { - for(i = 0; i < 6; i++) { - if (dev->resource[i].flags & IORESOURCE_IO) { - dev->resource[i].start |= (0xfe << 24); - dev->resource[i].end |= (0xfe << 24); - } - } - } -} - - -/* The "bootloader" for Synergy boards does none of this for us, so we need to - lay it all out ourselves... --Dan */ -void __init gemini_find_bridges(void) -{ - struct pci_controller* hose; - - ppc_md.pcibios_fixup = gemini_pcibios_fixup; - - hose = pcibios_alloc_controller(); - if (!hose) - return; - setup_indirect_pci(hose, 0xfec00000, 0xfee00000); -} diff --git a/arch/ppc/platforms/gemini_prom.S b/arch/ppc/platforms/gemini_prom.S deleted file mode 100644 index e8c84d24f01f..000000000000 --- a/arch/ppc/platforms/gemini_prom.S +++ /dev/null @@ -1,90 +0,0 @@ -/* - * Not really prom support code (yet), but sort of anti-prom code. The current - * bootloader does a number of things it shouldn't and doesn't do things that it - * should. The stuff in here is mainly a hodge-podge collection of setup code - * to get the board up and running. - * ---Dan - */ - -#include -#include -#include -#include - -/* - * On 750's the MMU is on when Linux is booted, so we need to clear out the - * bootloader's BAT settings, make sure we're in supervisor state (gotcha!), - * and turn off the MMU. - * - */ - -_GLOBAL(gemini_prom_init) -#ifdef CONFIG_SMP - /* Since the MMU's on, get stuff in rom space that we'll need */ - lis r4,GEMINI_CPUSTAT@h - ori r4,r4,GEMINI_CPUSTAT@l - lbz r5,0(r4) - andi. r5,r5,3 - mr r24,r5 /* cpu # used later on */ -#endif - mfmsr r4 - li r3,MSR_PR /* ensure supervisor! */ - ori r3,r3,MSR_IR|MSR_DR - andc r4,r4,r3 - mtmsr r4 - isync -#if 0 - /* zero out the bats now that the MMU is off */ -prom_no_mmu: - li r3,0 - mtspr SPRN_IBAT0U,r3 - mtspr SPRN_IBAT0L,r3 - mtspr SPRN_IBAT1U,r3 - mtspr SPRN_IBAT1L,r3 - mtspr SPRN_IBAT2U,r3 - mtspr SPRN_IBAT2L,r3 - mtspr SPRN_IBAT3U,r3 - mtspr SPRN_IBAT3L,r3 - - mtspr SPRN_DBAT0U,r3 - mtspr SPRN_DBAT0L,r3 - mtspr SPRN_DBAT1U,r3 - mtspr SPRN_DBAT1L,r3 - mtspr SPRN_DBAT2U,r3 - mtspr SPRN_DBAT2L,r3 - mtspr SPRN_DBAT3U,r3 - mtspr SPRN_DBAT3L,r3 -#endif - - /* the bootloader (as far as I'm currently aware) doesn't mess with page - tables, but since we're already here, might as well zap these, too */ - li r4,0 - mtspr SPRN_SDR1,r4 - - li r4,16 - mtctr r4 - li r3,0 - li r4,0 -3: mtsrin r3,r4 - addi r3,r3,1 - bdnz 3b - -#ifdef CONFIG_SMP - /* The 750 book (and Mot/IBM support) says that this will "assist" snooping - when in SMP. Not sure yet whether this should stay or leave... */ - mfspr r4,SPRN_HID0 - ori r4,r4,HID0_ABE - mtspr SPRN_HID0,r4 - sync -#endif /* CONFIG_SMP */ - blr - -/* apparently, SMon doesn't pay attention to HID0[SRST]. Disable the MMU and - branch to 0xfff00100 */ -_GLOBAL(_gemini_reboot) - lis r5,GEMINI_BOOT_INIT@h - ori r5,r5,GEMINI_BOOT_INIT@l - li r6,MSR_IP - mtspr SPRN_SRR0,r5 - mtspr SPRN_SRR1,r6 - rfi diff --git a/arch/ppc/platforms/gemini_serial.h b/arch/ppc/platforms/gemini_serial.h deleted file mode 100644 index b915eff79fdb..000000000000 --- a/arch/ppc/platforms/gemini_serial.h +++ /dev/null @@ -1,40 +0,0 @@ -#ifdef __KERNEL__ -#ifndef __ASMPPC_GEMINI_SERIAL_H -#define __ASMPPC_GEMINI_SERIAL_H - -#include - -#ifdef CONFIG_SERIAL_MANY_PORTS -#define RS_TABLE_SIZE 64 -#else -#define RS_TABLE_SIZE 4 -#endif - -/* Rate for the 24.576 Mhz clock for the onboard serial chip */ -#define BASE_BAUD (24576000 / 16) - -#ifdef CONFIG_SERIAL_DETECT_IRQ -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ) -#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_AUTO_IRQ) -#else -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST) -#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF) -#endif - -#define STD_SERIAL_PORT_DEFNS \ - { 0, BASE_BAUD, GEMINI_SERIAL_A, 15, STD_COM_FLAGS }, /* ttyS0 */ \ - { 0, BASE_BAUD, GEMINI_SERIAL_B, 14, STD_COM_FLAGS }, /* ttyS1 */ \ - -#ifdef CONFIG_GEMINI_PU32 -#define PU32_SERIAL_PORT_DEFNS \ - { 0, BASE_BAUD, NULL, 0, STD_COM_FLAGS }, -#else -#define PU32_SERIAL_PORT_DEFNS -#endif - -#define SERIAL_PORT_DFNS \ - STD_SERIAL_PORT_DEFNS \ - PU32_SERIAL_PORT_DEFNS - -#endif -#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/gemini_setup.c b/arch/ppc/platforms/gemini_setup.c deleted file mode 100644 index f48048f362a8..000000000000 --- a/arch/ppc/platforms/gemini_setup.c +++ /dev/null @@ -1,577 +0,0 @@ -/* - * Copyright (C) 1995 Linus Torvalds - * Adapted from 'alpha' version by Gary Thomas - * Modified by Cort Dougan (cort@cs.nmt.edu) - * Synergy Microsystems board support by Dan Cox (dan@synergymicro.com) - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -void gemini_find_bridges(void); -static int gemini_get_clock_speed(void); -extern void gemini_pcibios_fixup(void); - -static char *gemini_board_families[] = { - "VGM", "VSS", "KGM", "VGR", "VCM", "VCS", "KCM", "VCR" -}; -static int gemini_board_count = sizeof(gemini_board_families) / - sizeof(gemini_board_families[0]); - -static unsigned int cpu_7xx[16] = { - 0, 15, 14, 0, 0, 13, 5, 9, 6, 11, 8, 10, 16, 12, 7, 0 -}; -static unsigned int cpu_6xx[16] = { - 0, 0, 14, 0, 0, 13, 5, 9, 6, 11, 8, 10, 0, 12, 7, 0 -}; - -/* - * prom_init is the Gemini version of prom.c:prom_init. We only need - * the BSS clearing code, so I copied that out of prom.c. This is a - * lot simpler than hacking prom.c so it will build with Gemini. -VAL - */ - -#define PTRRELOC(x) ((typeof(x))((unsigned long)(x) + offset)) - -unsigned long -prom_init(void) -{ - unsigned long offset = reloc_offset(); - unsigned long phys; - extern char __bss_start, _end; - - /* First zero the BSS -- use memset, some arches don't have - * caches on yet */ - memset_io(PTRRELOC(&__bss_start),0 , &_end - &__bss_start); - - /* Default */ - phys = offset + KERNELBASE; - - gemini_prom_init(); - - return phys; -} - -int -gemini_show_cpuinfo(struct seq_file *m) -{ - unsigned char reg, rev; - char *family; - unsigned int type; - - reg = readb(GEMINI_FEAT); - family = gemini_board_families[((reg>>4) & 0xf)]; - if (((reg>>4) & 0xf) > gemini_board_count) - printk(KERN_ERR "cpuinfo(): unable to determine board family\n"); - - reg = readb(GEMINI_BREV); - type = (reg>>4) & 0xf; - rev = reg & 0xf; - - reg = readb(GEMINI_BECO); - - seq_printf(m, "machine\t\t: Gemini %s%d, rev %c, eco %d\n", - family, type, (rev + 'A'), (reg & 0xf)); - - seq_printf(m, "board\t\t: Gemini %s", family); - if (type > 9) - seq_printf(m, "%c", (type - 10) + 'A'); - else - seq_printf(m, "%d", type); - - seq_printf(m, ", rev %c, eco %d\n", (rev + 'A'), (reg & 0xf)); - - seq_printf(m, "clock\t\t: %dMhz\n", gemini_get_clock_speed()); - - return 0; -} - -static u_char gemini_openpic_initsenses[] = { - 1, - 1, - 1, - 1, - 0, - 0, - 1, /* remainder are level-triggered */ -}; - -#define GEMINI_MPIC_ADDR (0xfcfc0000) -#define GEMINI_MPIC_PCI_CFG (0x80005800) - -void __init gemini_openpic_init(void) -{ - - OpenPIC_Addr = (volatile struct OpenPIC *) - grackle_read(GEMINI_MPIC_PCI_CFG + 0x10); - OpenPIC_InitSenses = gemini_openpic_initsenses; - OpenPIC_NumInitSenses = sizeof( gemini_openpic_initsenses ); - - ioremap( GEMINI_MPIC_ADDR, OPENPIC_SIZE); -} - - -extern unsigned long loops_per_jiffy; -extern int root_mountflags; -extern char cmd_line[]; - -void -gemini_heartbeat(void) -{ - static unsigned long led = GEMINI_LEDBASE+(4*8); - static char direction = 8; - - - /* We only want to do this on 1 CPU */ - if (smp_processor_id()) - return; - *(char *)led = 0; - if ( (led + direction) > (GEMINI_LEDBASE+(7*8)) || - (led + direction) < (GEMINI_LEDBASE+(4*8)) ) - direction *= -1; - led += direction; - *(char *)led = 0xff; - ppc_md.heartbeat_count = ppc_md.heartbeat_reset; -} - -void __init gemini_setup_arch(void) -{ - extern char cmd_line[]; - - - loops_per_jiffy = 50000000/HZ; - -#ifdef CONFIG_BLK_DEV_INITRD - /* bootable off CDROM */ - if (initrd_start) - ROOT_DEV = Root_SR0; - else -#endif - ROOT_DEV = Root_SDA1; - - /* nothing but serial consoles... */ - sprintf(cmd_line, "%s console=ttyS0", cmd_line); - - printk("Boot arguments: %s\n", cmd_line); - - ppc_md.heartbeat = gemini_heartbeat; - ppc_md.heartbeat_reset = HZ/8; - ppc_md.heartbeat_count = 1; - - /* Lookup PCI hosts */ - gemini_find_bridges(); - /* take special pains to map the MPIC, since it isn't mapped yet */ - gemini_openpic_init(); - /* start the L2 */ - gemini_init_l2(); -} - - -int -gemini_get_clock_speed(void) -{ - unsigned long hid1, pvr; - int clock; - - pvr = mfspr(SPRN_PVR); - hid1 = (mfspr(SPRN_HID1) >> 28) & 0xf; - if (PVR_VER(pvr) == 8 || - PVR_VER(pvr) == 12) - hid1 = cpu_7xx[hid1]; - else - hid1 = cpu_6xx[hid1]; - - switch((readb(GEMINI_BSTAT) & 0xc) >> 2) { - - case 0: - default: - clock = (hid1*100)/3; - break; - - case 1: - clock = (hid1*125)/3; - break; - - case 2: - clock = (hid1*50); - break; - } - - return clock; -} - -void __init gemini_init_l2(void) -{ - unsigned char reg, brev, fam, creg; - unsigned long cache; - unsigned long pvr; - - reg = readb(GEMINI_L2CFG); - brev = readb(GEMINI_BREV); - fam = readb(GEMINI_FEAT); - pvr = mfspr(SPRN_PVR); - - switch(PVR_VER(pvr)) { - - case 8: - if (reg & 0xc0) - cache = (((reg >> 6) & 0x3) << 28); - else - cache = 0x3 << 28; - -#ifdef CONFIG_SMP - /* Pre-3.0 processor revs had snooping errata. Leave - their L2's disabled with SMP. -- Dan */ - if (PVR_CFG(pvr) < 3) { - printk("Pre-3.0 750; L2 left disabled!\n"); - return; - } -#endif /* CONFIG_SMP */ - - /* Special case: VGM5-B's came before L2 ratios were set on - the board. Processor speed shouldn't be too high, so - set L2 ratio to 1:1.5. */ - if ((brev == 0x51) && ((fam & 0xa0) >> 4) == 0) - reg |= 1; - - /* determine best cache ratio based upon what the board - tells us (which sometimes _may_ not be true) and - the processor speed. */ - else { - if (gemini_get_clock_speed() > 250) - reg = 2; - } - break; - case 12: - { - static unsigned long l2_size_val = 0; - - if (!l2_size_val) - l2_size_val = _get_L2CR(); - cache = l2_size_val; - break; - } - case 4: - case 9: - creg = readb(GEMINI_CPUSTAT); - if (((creg & 0xc) >> 2) != 1) - printk("Dual-604 boards don't support the use of L2\n"); - else - writeb(1, GEMINI_L2CFG); - return; - default: - printk("Unknown processor; L2 left disabled\n"); - return; - } - - cache |= ((1<>2)&0x3) { - case 0: - default: - freq = 66667; - break; - case 1: - freq = 83000; - break; - case 2: - freq = 100000; - break; - } - - freq *= 1000; - divisor = 4; - tb_ticks_per_jiffy = freq / HZ / divisor; - tb_to_us = mulhwu_scale_factor(freq/divisor, 1000000); -} - -unsigned long __init gemini_find_end_of_memory(void) -{ - unsigned long total; - unsigned char reg; - - reg = readb(GEMINI_MEMCFG); - total = ((1<<((reg & 0x7) - 1)) * - (8<<((reg >> 3) & 0x7))); - total *= (1024*1024); - return total; -} - -static void __init -gemini_map_io(void) -{ - io_block_mapping(0xf0000000, 0xf0000000, 0x10000000, _PAGE_IO); - io_block_mapping(0x80000000, 0x80000000, 0x10000000, _PAGE_IO); -} - -#ifdef CONFIG_SMP -static int -smp_gemini_probe(void) -{ - int i, nr; - - nr = (readb(GEMINI_CPUSTAT) & GEMINI_CPU_COUNT_MASK) >> 2; - if (nr == 0) - nr = 4; - - if (nr > 1) { - openpic_request_IPIs(); - for (i = 1; i < nr; ++i) - smp_hw_index[i] = i; - } - - return nr; -} - -static void -smp_gemini_kick_cpu(int nr) -{ - openpic_reset_processor_phys(1 << nr); - openpic_reset_processor_phys(0); -} - -static void -smp_gemini_setup_cpu(int cpu_nr) -{ - if (OpenPIC_Addr) - do_openpic_setup_cpu(); - if (cpu_nr > 0) - gemini_init_l2(); -} - -static struct smp_ops_t gemini_smp_ops = { - smp_openpic_message_pass, - smp_gemini_probe, - smp_gemini_kick_cpu, - smp_gemini_setup_cpu, - .give_timebase = smp_generic_give_timebase, - .take_timebase = smp_generic_take_timebase, -}; -#endif /* CONFIG_SMP */ - -void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - int i; - - /* Restore BATs for now */ - mtspr(SPRN_DBAT3U, 0xf0001fff); - mtspr(SPRN_DBAT3L, 0xf000002a); - - parse_bootinfo(find_bootinfo()); - - for(i = 0; i < GEMINI_LEDS; i++) - gemini_led_off(i); - - ISA_DMA_THRESHOLD = 0; - DMA_MODE_READ = 0; - DMA_MODE_WRITE = 0; - -#ifdef CONFIG_BLK_DEV_INITRD - if ( r4 ) - { - initrd_start = r4 + KERNELBASE; - initrd_end = r5 + KERNELBASE; - } -#endif - - ppc_md.setup_arch = gemini_setup_arch; - ppc_md.show_cpuinfo = gemini_show_cpuinfo; - ppc_md.init_IRQ = gemini_init_IRQ; - ppc_md.get_irq = openpic_get_irq; - ppc_md.init = NULL; - - ppc_md.restart = gemini_restart; - ppc_md.power_off = gemini_power_off; - ppc_md.halt = gemini_halt; - - ppc_md.time_init = gemini_time_init; - ppc_md.set_rtc_time = gemini_set_rtc_time; - ppc_md.get_rtc_time = gemini_get_rtc_time; - ppc_md.calibrate_decr = gemini_calibrate_decr; - - ppc_md.find_end_of_memory = gemini_find_end_of_memory; - ppc_md.setup_io_mappings = gemini_map_io; - - ppc_md.pcibios_fixup_bus = gemini_pcibios_fixup; - -#ifdef CONFIG_SMP - smp_ops = &gemini_smp_ops; -#endif /* CONFIG_SMP */ -} diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index dca23f2ef851..d84f04666972 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -45,7 +45,6 @@ obj-$(CONFIG_EBONY) += pci_auto.o todc_time.o obj-$(CONFIG_EV64260) += todc_time.o pci_auto.o obj-$(CONFIG_EV64360) += todc_time.o obj-$(CONFIG_CHESTNUT) += mv64360_pic.o pci_auto.o -obj-$(CONFIG_GEMINI) += open_pic.o obj-$(CONFIG_GT64260) += gt64260_pic.o obj-$(CONFIG_LOPEC) += pci_auto.o todc_time.o obj-$(CONFIG_HDPU) += pci_auto.o diff --git a/arch/ppc/xmon/start.c b/arch/ppc/xmon/start.c index d74a883e5bde..8f0b953179fa 100644 --- a/arch/ppc/xmon/start.c +++ b/arch/ppc/xmon/start.c @@ -58,10 +58,7 @@ static struct sysrq_key_op sysrq_xmon_op = void xmon_map_scc(void) { -#if defined(CONFIG_GEMINI) - /* should already be mapped by the kernel boot */ - sccd = (volatile unsigned char *) 0xffeffb08; -#elif defined(CONFIG_405GP) +#if defined(CONFIG_405GP) sccd = (volatile unsigned char *)0xef600300; #elif defined(CONFIG_440EP) sccd = (volatile unsigned char *) ioremap(PPC440EP_UART0_ADDR, 8); diff --git a/include/asm-ppc/m48t35.h b/include/asm-ppc/m48t35.h deleted file mode 100644 index a5277ea4b194..000000000000 --- a/include/asm-ppc/m48t35.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Registers for the SGS-Thomson M48T35 Timekeeper RAM chip - * and - * Registers for the SGS-Thomson M48T37 Timekeeper RAM chip - * The 37 is the 35 plus alarm and century thus the offsets - * are shifted by the extra registers. - */ - -#ifndef __PPC_M48T35_H -#define __PPC_M48T35_H - -/* RTC offsets */ -#define M48T35_RTC_FLAGS (-8) /* the negative regs are really T37 only */ -#define M48T35_RTC_CENTURY (-7) -#define M48T35_RTC_AL_SEC (-6) -#define M48T35_RTC_AL_MIN (-5) -#define M48T35_RTC_AL_HRS (-4) -#define M48T35_RTC_AL_DOM (-3) -#define M48T35_RTC_INTERRUPT (-2) -#define M48T35_RTC_WATCHDOG (-1) -#define M48T35_RTC_CONTROL 0 /* T35 starts here */ -#define M48T35_RTC_SECONDS 1 -#define M48T35_RTC_MINUTES 2 -#define M48T35_RTC_HOURS 3 -#define M48T35_RTC_DAY 4 -#define M48T35_RTC_DOM 5 -#define M48T35_RTC_MONTH 6 -#define M48T35_RTC_YEAR 7 - -/* this way help us know which bits go with which regs */ -#define M48T35_RTC_FLAGS_BL 0x10 -#define M48T35_RTC_FLAGS_AF 0x40 -#define M48T35_RTC_FLAGS_WDF 0x80 - -#define M48T35_RTC_INTERRUPT_AFE 0x80 -#define M48T35_RTC_INTERRUPT_ABE 0x20 -#define M48T35_RTC_INTERRUPT_ALL (M48T35_RTC_INTERRUPT_AFE|M48T35_RTC_INTERRUPT_ABE) - -#define M48T35_RTC_WATCHDOG_RB 0x03 -#define M48T35_RTC_WATCHDOG_BMB 0x7c -#define M48T35_RTC_WATCHDOG_WDS 0x80 -#define M48T35_RTC_WATCHDOG_ALL (M48T35_RTC_WATCHDOG_RB|M48T35_RTC_WATCHDOG_BMB|M48T35_RTC_W) - -#define M48T35_RTC_CONTROL_WRITE 0x80 -#define M48T35_RTC_CONTROL_READ 0x40 -#define M48T35_RTC_CONTROL_CAL_SIGN 0x20 -#define M48T35_RTC_CONTROL_CAL_VALUE 0x1f -#define M48T35_RTC_CONTROL_LOCKED (M48T35_RTC_WRITE|M48T35_RTC_READ) -#define M48T35_RTC_CONTROL_CALIBRATION (M48T35_RTC_CONTROL_CAL_SIGN|M48T35_RTC_CONTROL_CAL_VALUE) - -#define M48T35_RTC_SECONDS_SEC_1 0x0f -#define M48T35_RTC_SECONDS_SEC_10 0x70 -#define M48T35_RTC_SECONDS_ST 0x80 -#define M48T35_RTC_SECONDS_SEC_ALL (M48T35_RTC_SECONDS_SEC_1|M48T35_RTC_SECONDS_SEC_10) - -#define M48T35_RTC_MINUTES_MIN_1 0x0f -#define M48T35_RTC_MINUTES_MIN_10 0x70 -#define M48T35_RTC_MINUTES_MIN_ALL (M48T35_RTC_MINUTES_MIN_1|M48T35_RTC_MINUTES_MIN_10) - -#define M48T35_RTC_HOURS_HRS_1 0x0f -#define M48T35_RTC_HOURS_HRS_10 0x30 -#define M48T35_RTC_HOURS_HRS_ALL (M48T35_RTC_HOURS_HRS_1|M48T35_RTC_HOURS_HRS_10) - -#define M48T35_RTC_DAY_DAY_1 0x03 -#define M48T35_RTC_DAY_FT 0x40 - -#define M48T35_RTC_ALARM_OFF 0x00 -#define M48T35_RTC_WATCHDOG_OFF 0x00 - - -/* legacy */ -#define M48T35_RTC_SET 0x80 -#define M48T35_RTC_STOPPED 0x80 -#define M48T35_RTC_READ 0x40 - - -#endif diff --git a/include/asm-ppc/serial.h b/include/asm-ppc/serial.h index 8a59f8871f32..8fc1b546613d 100644 --- a/include/asm-ppc/serial.h +++ b/include/asm-ppc/serial.h @@ -11,8 +11,6 @@ #include #elif defined(CONFIG_CHESTNUT) #include -#elif defined(CONFIG_GEMINI) -#include #elif defined(CONFIG_POWERPMC250) #include #elif defined(CONFIG_LOPEC) -- cgit v1.2.3-59-g8ed1b