From c5a210453cf5c9140947533168077f518a01b4cd Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Sun, 7 Mar 2021 19:28:30 +0000 Subject: MIPS: ingenic: gcw0: SPI panel does not require active-high CS The NT39016 panel is a fun beast, even though the documentation states that the CS line is active-low, it will work just fine if the CS line is configured as active-high, but it won't work if the CS line is forced low or forced high. Since it did actually work with the spi-cs-high property, this is not a bugfix, but we should nonetheless remove that property to match the documentation. Signed-off-by: Paul Cercueil Signed-off-by: Thomas Bogendoerfer --- arch/mips/boot/dts/ingenic/gcw0.dts | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/mips/boot/dts/ingenic/gcw0.dts b/arch/mips/boot/dts/ingenic/gcw0.dts index bc72304a2440..f4c04f2263ea 100644 --- a/arch/mips/boot/dts/ingenic/gcw0.dts +++ b/arch/mips/boot/dts/ingenic/gcw0.dts @@ -345,7 +345,6 @@ spi-max-frequency = <3125000>; spi-3wire; - spi-cs-high; reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>; -- cgit v1.2.3-59-g8ed1b