From c5fa4fdcdbe5f52c3e36892cc81f9378339b00ce Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 23 Mar 2012 00:17:43 +0530 Subject: ARM: SPEAr3xx: Add device-tree support to SPEAr3xx architecture This patch adds a generic target for SPEAr3xx machines that can be configured via the device-tree. Currently the following devices are supported via the devicetree: - VIC interrupts - PL011 UART - PL061 GPIO - PL110 CLCD - SP805 WDT - Synopsys DW I2C - Synopsys DW ethernet - ST FSMC-NAND - ST SPEAR-SMI - ST SPEAR-KEYBOARD - ST SPEAR-RTC - ARASAN SDHCI-SPEAR - SPEAR-EHCI - SPEAR-OHCI Other peripheral devices will follow in later patches. This also removes IO_ADDRESS macro and creates 16 MB static mappings instead of 4K for individual peripherals. This is done to have efficient TLB lookup for any I/O windows that are located closely together. ioremap() on this range will return this mapping only instead of creating another. Signed-off-by: Viresh Kumar --- Documentation/arm/SPEAr/overview.txt | 13 +- Documentation/devicetree/bindings/arm/spear.txt | 18 +++ arch/arm/boot/dts/spear300-evb.dts | 179 ++++++++++++++++++++++++ arch/arm/boot/dts/spear300.dtsi | 72 ++++++++++ arch/arm/boot/dts/spear310-evb.dts | 107 ++++++++++++++ arch/arm/boot/dts/spear310.dtsi | 75 ++++++++++ arch/arm/boot/dts/spear320-evb.dts | 108 ++++++++++++++ arch/arm/boot/dts/spear320.dtsi | 90 ++++++++++++ arch/arm/boot/dts/spear3xx.dtsi | 136 ++++++++++++++++++ arch/arm/mach-spear3xx/Kconfig | 34 +---- arch/arm/mach-spear3xx/Makefile | 13 +- arch/arm/mach-spear3xx/Makefile.boot | 4 + arch/arm/mach-spear3xx/clock.c | 103 ++++++++------ arch/arm/mach-spear3xx/include/mach/generic.h | 29 ++-- arch/arm/mach-spear3xx/include/mach/hardware.h | 3 - arch/arm/mach-spear3xx/include/mach/spear.h | 9 +- arch/arm/mach-spear3xx/spear300.c | 97 +++++++++---- arch/arm/mach-spear3xx/spear300_evb.c | 75 ---------- arch/arm/mach-spear3xx/spear310.c | 126 ++++++++++++++--- arch/arm/mach-spear3xx/spear310_evb.c | 81 ----------- arch/arm/mach-spear3xx/spear320.c | 127 ++++++++++++++--- arch/arm/mach-spear3xx/spear320_evb.c | 79 ----------- arch/arm/mach-spear3xx/spear3xx.c | 127 ++++++++--------- arch/arm/plat-spear/Kconfig | 3 +- 24 files changed, 1222 insertions(+), 486 deletions(-) create mode 100644 arch/arm/boot/dts/spear300-evb.dts create mode 100644 arch/arm/boot/dts/spear300.dtsi create mode 100644 arch/arm/boot/dts/spear310-evb.dts create mode 100644 arch/arm/boot/dts/spear310.dtsi create mode 100644 arch/arm/boot/dts/spear320-evb.dts create mode 100644 arch/arm/boot/dts/spear320.dtsi create mode 100644 arch/arm/boot/dts/spear3xx.dtsi delete mode 100644 arch/arm/mach-spear3xx/spear300_evb.c delete mode 100644 arch/arm/mach-spear3xx/spear310_evb.c delete mode 100644 arch/arm/mach-spear3xx/spear320_evb.c diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/SPEAr/overview.txt index 253a35c6f782..28a9af953b9d 100644 --- a/Documentation/arm/SPEAr/overview.txt +++ b/Documentation/arm/SPEAr/overview.txt @@ -17,14 +17,14 @@ Introduction SPEAr (Platform) - SPEAr3XX (3XX SOC series, based on ARM9) - SPEAr300 (SOC) - - SPEAr300_EVB (Evaluation Board) + - SPEAr300 Evaluation Board - SPEAr310 (SOC) - - SPEAr310_EVB (Evaluation Board) + - SPEAr310 Evaluation Board - SPEAr320 (SOC) - - SPEAr320_EVB (Evaluation Board) + - SPEAr320 Evaluation Board - SPEAr6XX (6XX SOC series, based on ARM9) - SPEAr600 (SOC) - - SPEAr600_EVB (Evaluation Board) + - SPEAr600 Evaluation Board - SPEAr13XX (13XX SOC series, based on ARM CORTEXA9) - SPEAr1300 (SOC) @@ -51,10 +51,11 @@ Introduction Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine specific files, like spear300.c, spear310.c, spear320.c and spear600.c. - mach-spear* also contains board specific files for each machine type. + mach-spear* doesn't contains board specific files as they fully support + Flattened Device Tree. Document Author --------------- - Viresh Kumar, (c) 2010 ST Microelectronics + Viresh Kumar , (c) 2010-2012 ST Microelectronics diff --git a/Documentation/devicetree/bindings/arm/spear.txt b/Documentation/devicetree/bindings/arm/spear.txt index f8e54f092328..aa5f355cc947 100644 --- a/Documentation/devicetree/bindings/arm/spear.txt +++ b/Documentation/devicetree/bindings/arm/spear.txt @@ -6,3 +6,21 @@ Boards with the ST SPEAr600 SoC shall have the following properties: Required root node property: compatible = "st,spear600"; + +Boards with the ST SPEAr300 SoC shall have the following properties: + +Required root node property: + +compatible = "st,spear300"; + +Boards with the ST SPEAr310 SoC shall have the following properties: + +Required root node property: + +compatible = "st,spear310"; + +Boards with the ST SPEAr320 SoC shall have the following properties: + +Required root node property: + +compatible = "st,spear320"; diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts new file mode 100644 index 000000000000..f2ee991705a4 --- /dev/null +++ b/arch/arm/boot/dts/spear300-evb.dts @@ -0,0 +1,179 @@ +/* + * DTS file for SPEAr300 Evaluation Baord + * + * Copyright 2012 Viresh Kumar + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "spear300.dtsi" + +/ { + model = "ST SPEAr300 Evaluation Board"; + compatible = "st,spear300-evb", "st,spear300"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + reg = <0 0x40000000>; + }; + + ahb { + clcd@60000000 { + status = "okay"; + }; + + fsmc: flash@94000000 { + status = "okay"; + }; + + gmac: eth@e0800000 { + status = "okay"; + }; + + sdhci@70000000 { + int-gpio = <&gpio1 0 0>; + power-gpio = <&gpio1 2 1>; + status = "okay"; + }; + + smi: flash@fc000000 { + status = "okay"; + }; + + spi0: spi@d0100000 { + status = "okay"; + }; + + ehci@e1800000 { + status = "okay"; + }; + + ohci@e1900000 { + status = "okay"; + }; + + ohci@e2100000 { + status = "okay"; + }; + + apb { + gpio0: gpio@fc980000 { + status = "okay"; + }; + + gpio1: gpio@a9000000 { + status = "okay"; + }; + + i2c0: i2c@d0180000 { + status = "okay"; + }; + + kbd@a0000000 { + linux,keymap = < 0x00010000 + 0x00020100 + 0x00030200 + 0x00040300 + 0x00050400 + 0x00060500 + 0x00070600 + 0x00080700 + 0x00090800 + 0x000a0001 + 0x000c0101 + 0x000d0201 + 0x000e0301 + 0x000f0401 + 0x00100501 + 0x00110601 + 0x00120701 + 0x00130801 + 0x00140002 + 0x00150102 + 0x00160202 + 0x00170302 + 0x00180402 + 0x00190502 + 0x001a0602 + 0x001b0702 + 0x001c0802 + 0x001d0003 + 0x001e0103 + 0x001f0203 + 0x00200303 + 0x00210403 + 0x00220503 + 0x00230603 + 0x00240703 + 0x00250803 + 0x00260004 + 0x00270104 + 0x00280204 + 0x00290304 + 0x002a0404 + 0x002b0504 + 0x002c0604 + 0x002d0704 + 0x002e0804 + 0x002f0005 + 0x00300105 + 0x00310205 + 0x00320305 + 0x00330405 + 0x00340505 + 0x00350605 + 0x00360705 + 0x00370805 + 0x00380006 + 0x00390106 + 0x003a0206 + 0x003b0306 + 0x003c0406 + 0x003d0506 + 0x003e0606 + 0x003f0706 + 0x00400806 + 0x00410007 + 0x00420107 + 0x00430207 + 0x00440307 + 0x00450407 + 0x00460507 + 0x00470607 + 0x00480707 + 0x00490807 + 0x004a0008 + 0x004b0108 + 0x004c0208 + 0x004d0308 + 0x004e0408 + 0x004f0508 + 0x00500608 + 0x00510708 + 0x00520808 >; + autorepeat; + st,mode = <0>; + status = "okay"; + }; + + rtc@fc900000 { + status = "okay"; + }; + + serial@d0000000 { + status = "okay"; + }; + + wdt@fc880000 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi new file mode 100644 index 000000000000..f9fcbf4f477b --- /dev/null +++ b/arch/arm/boot/dts/spear300.dtsi @@ -0,0 +1,72 @@ +/* + * DTS file for SPEAr300 SoC + * + * Copyright 2012 Viresh Kumar + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "spear3xx.dtsi" + +/ { + ahb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x60000000 0x60000000 0x50000000 + 0xd0000000 0xd0000000 0x30000000>; + + clcd@60000000 { + compatible = "arm,clcd-pl110", "arm,primecell"; + reg = <0x60000000 0x1000>; + interrupts = <30>; + status = "disabled"; + }; + + fsmc: flash@94000000 { + compatible = "st,spear600-fsmc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x94000000 0x1000 /* FSMC Register */ + 0x80000000 0x0010>; /* NAND Base */ + reg-names = "fsmc_regs", "nand_data"; + st,ale-off = <0x20000>; + st,cle-off = <0x10000>; + status = "disabled"; + }; + + sdhci@70000000 { + compatible = "st,sdhci-spear"; + reg = <0x70000000 0x100>; + interrupts = <1>; + status = "disabled"; + }; + + apb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0xa0000000 0xa0000000 0x10000000 + 0xd0000000 0xd0000000 0x30000000>; + + gpio1: gpio@a9000000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0xa9000000 0x1000>; + status = "disabled"; + }; + + kbd@a0000000 { + compatible = "st,spear300-kbd"; + reg = <0xa0000000 0x1000>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts new file mode 100644 index 000000000000..ec19d7b9795a --- /dev/null +++ b/arch/arm/boot/dts/spear310-evb.dts @@ -0,0 +1,107 @@ +/* + * DTS file for SPEAr310 Evaluation Baord + * + * Copyright 2012 Viresh Kumar + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "spear310.dtsi" + +/ { + model = "ST SPEAr310 Evaluation Board"; + compatible = "st,spear310-evb", "st,spear310"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + reg = <0 0x40000000>; + }; + + ahb { + fsmc: flash@44000000 { + status = "okay"; + }; + + gmac: eth@e0800000 { + status = "okay"; + }; + + smi: flash@fc000000 { + status = "okay"; + clock-rate=<50000000>; + + flash@f8000000 { + label = "m25p64"; + reg = <0xf8000000 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + st,smi-fast-mode; + }; + }; + + spi0: spi@d0100000 { + status = "okay"; + }; + + ehci@e1800000 { + status = "okay"; + }; + + ohci@e1900000 { + status = "okay"; + }; + + ohci@e2100000 { + status = "okay"; + }; + + apb { + gpio0: gpio@fc980000 { + status = "okay"; + }; + + i2c0: i2c@d0180000 { + status = "okay"; + }; + + rtc@fc900000 { + status = "okay"; + }; + + serial@d0000000 { + status = "okay"; + }; + + serial@b2000000 { + status = "okay"; + }; + + serial@b2080000 { + status = "okay"; + }; + + serial@b2100000 { + status = "okay"; + }; + + serial@b2180000 { + status = "okay"; + }; + + serial@b2200000 { + status = "okay"; + }; + + wdt@fc880000 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi new file mode 100644 index 000000000000..dc7fa14da846 --- /dev/null +++ b/arch/arm/boot/dts/spear310.dtsi @@ -0,0 +1,75 @@ +/* + * DTS file for SPEAr310 SoC + * + * Copyright 2012 Viresh Kumar + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "spear3xx.dtsi" + +/ { + ahb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x40000000 0x40000000 0x10000000 + 0xb0000000 0xb0000000 0x10000000 + 0xd0000000 0xd0000000 0x30000000>; + + fsmc: flash@44000000 { + compatible = "st,spear600-fsmc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x44000000 0x1000 /* FSMC Register */ + 0x40000000 0x0010>; /* NAND Base */ + reg-names = "fsmc_regs", "nand_data"; + st,ale-off = <0x10000>; + st,cle-off = <0x20000>; + status = "disabled"; + }; + + apb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0xb0000000 0xb0000000 0x10000000 + 0xd0000000 0xd0000000 0x30000000>; + + serial@b2000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb2000000 0x1000>; + status = "disabled"; + }; + + serial@b2080000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb2080000 0x1000>; + status = "disabled"; + }; + + serial@b2100000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb2100000 0x1000>; + status = "disabled"; + }; + + serial@b2180000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb2180000 0x1000>; + status = "disabled"; + }; + + serial@b2200000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb2200000 0x1000>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts new file mode 100644 index 000000000000..5681a974d9d5 --- /dev/null +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -0,0 +1,108 @@ +/* + * DTS file for SPEAr320 Evaluation Baord + * + * Copyright 2012 Viresh Kumar + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "spear320.dtsi" + +/ { + model = "ST SPEAr300 Evaluation Board"; + compatible = "st,spear300-evb", "st,spear300"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + reg = <0 0x40000000>; + }; + + ahb { + clcd@90000000 { + status = "okay"; + }; + + fsmc: flash@4c000000 { + status = "okay"; + }; + + gmac: eth@e0800000 { + status = "okay"; + }; + + sdhci@70000000 { + power-gpio = <&gpio0 2 1>; + power_always_enb; + status = "okay"; + }; + + smi: flash@fc000000 { + status = "okay"; + }; + + spi0: spi@d0100000 { + status = "okay"; + }; + + spi1: spi@a5000000 { + status = "okay"; + }; + + spi2: spi@a6000000 { + status = "okay"; + }; + + ehci@e1800000 { + status = "okay"; + }; + + ohci@e1900000 { + status = "okay"; + }; + + ohci@e2100000 { + status = "okay"; + }; + + apb { + gpio0: gpio@fc980000 { + status = "okay"; + }; + + i2c0: i2c@d0180000 { + status = "okay"; + }; + + i2c1: i2c@a7000000 { + status = "okay"; + }; + + rtc@fc900000 { + status = "okay"; + }; + + serial@d0000000 { + status = "okay"; + }; + + serial@a3000000 { + status = "okay"; + }; + + serial@a4000000 { + status = "okay"; + }; + + wdt@fc880000 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi new file mode 100644 index 000000000000..9a0267a5a0b7 --- /dev/null +++ b/arch/arm/boot/dts/spear320.dtsi @@ -0,0 +1,90 @@ +/* + * DTS file for SPEAr320 SoC + * + * Copyright 2012 Viresh Kumar + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "spear3xx.dtsi" + +/ { + ahb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x40000000 0x40000000 0x70000000 + 0xd0000000 0xd0000000 0x30000000>; + + clcd@90000000 { + compatible = "arm,clcd-pl110", "arm,primecell"; + reg = <0x90000000 0x1000>; + interrupts = <33>; + status = "disabled"; + }; + + fsmc: flash@4c000000 { + compatible = "st,spear600-fsmc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x4c000000 0x1000 /* FSMC Register */ + 0x50000000 0x0010>; /* NAND Base */ + reg-names = "fsmc_regs", "nand_data"; + st,ale-off = <0x20000>; + st,cle-off = <0x10000>; + status = "disabled"; + }; + + sdhci@70000000 { + compatible = "st,sdhci-spear"; + reg = <0x70000000 0x100>; + interrupts = <29>; + status = "disabled"; + }; + + spi1: spi@a5000000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0xa5000000 0x1000>; + status = "disabled"; + }; + + spi2: spi@a6000000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0xa6000000 0x1000>; + status = "disabled"; + }; + + apb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0xa0000000 0xa0000000 0x10000000 + 0xd0000000 0xd0000000 0x30000000>; + + i2c1: i2c@a7000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xa7000000 0x1000>; + status = "disabled"; + }; + + serial@a3000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xa3000000 0x1000>; + status = "disabled"; + }; + + serial@a4000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xa4000000 0x1000>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi new file mode 100644 index 000000000000..924a6f67ed05 --- /dev/null +++ b/arch/arm/boot/dts/spear3xx.dtsi @@ -0,0 +1,136 @@ +/* + * DTS file for all SPEAr3xx SoCs + * + * Copyright 2012 Viresh Kumar + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&vic>; + + cpus { + cpu@0 { + compatible = "arm,arm926ejs"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0x40000000>; + }; + + ahb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0xd0000000 0xd0000000 0x30000000>; + + vic: interrupt-controller@f1100000 { + compatible = "arm,pl190-vic"; + interrupt-controller; + reg = <0xf1100000 0x1000>; + #interrupt-cells = <1>; + }; + + gmac: eth@e0800000 { + compatible = "st,spear600-gmac"; + reg = <0xe0800000 0x8000>; + interrupts = <23 22>; + interrupt-names = "macirq", "eth_wake_irq"; + status = "disabled"; + }; + + smi: flash@fc000000 { + compatible = "st,spear600-smi"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xfc000000 0x1000>; + interrupts = <9>; + status = "disabled"; + }; + + spi0: spi@d0100000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0xd0100000 0x1000>; + interrupts = <20>; + status = "disabled"; + }; + + ehci@e1800000 { + compatible = "st,spear600-ehci", "usb-ehci"; + reg = <0xe1800000 0x1000>; + interrupts = <26>; + status = "disabled"; + }; + + ohci@e1900000 { + compatible = "st,spear600-ohci", "usb-ohci"; + reg = <0xe1900000 0x1000>; + interrupts = <25>; + status = "disabled"; + }; + + ohci@e2100000 { + compatible = "st,spear600-ohci", "usb-ohci"; + reg = <0xe2100000 0x1000>; + interrupts = <27>; + status = "disabled"; + }; + + apb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0xd0000000 0xd0000000 0x30000000>; + + gpio0: gpio@fc980000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xfc980000 0x1000>; + interrupts = <11>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + i2c0: i2c@d0180000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xd0180000 0x1000>; + interrupts = <21>; + status = "disabled"; + }; + + rtc@fc900000 { + compatible = "st,spear-rtc"; + reg = <0xfc900000 0x1000>; + interrupts = <10>; + status = "disabled"; + }; + + serial@d0000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xd0000000 0x1000>; + interrupts = <19>; + status = "disabled"; + }; + + wdt@fc880000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0xfc880000 0x1000>; + interrupts = <12>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/mach-spear3xx/Kconfig b/arch/arm/mach-spear3xx/Kconfig index 2cee6b0de371..d9fe11cb6f16 100644 --- a/arch/arm/mach-spear3xx/Kconfig +++ b/arch/arm/mach-spear3xx/Kconfig @@ -5,39 +5,19 @@ if ARCH_SPEAR3XX menu "SPEAr3xx Implementations" -config BOARD_SPEAR300_EVB - bool "SPEAr300 Evaluation Board" - select MACH_SPEAR300 - help - Supports ST SPEAr300 Evaluation Board - -config BOARD_SPEAR310_EVB - bool "SPEAr310 Evaluation Board" - select MACH_SPEAR310 - help - Supports ST SPEAr310 Evaluation Board - -config BOARD_SPEAR320_EVB - bool "SPEAr320 Evaluation Board" - select MACH_SPEAR320 - help - Supports ST SPEAr320 Evaluation Board - -endmenu - config MACH_SPEAR300 - bool "SPEAr300" + bool "SPEAr300 Machine support with Device Tree" help - Supports ST SPEAr300 Machine + Supports ST SPEAr300 machine configured via the device-tree config MACH_SPEAR310 - bool "SPEAr310" + bool "SPEAr310 Machine support with Device Tree" help - Supports ST SPEAr310 Machine + Supports ST SPEAr310 machine configured via the device-tree config MACH_SPEAR320 - bool "SPEAr320" + bool "SPEAr320 Machine support with Device Tree" help - Supports ST SPEAr320 Machine - + Supports ST SPEAr320 machine configured via the device-tree +endmenu endif #ARCH_SPEAR3XX diff --git a/arch/arm/mach-spear3xx/Makefile b/arch/arm/mach-spear3xx/Makefile index b24862489704..17b5d83cf2d5 100644 --- a/arch/arm/mach-spear3xx/Makefile +++ b/arch/arm/mach-spear3xx/Makefile @@ -3,24 +3,13 @@ # # common files -obj-y += spear3xx.o clock.o +obj-$(CONFIG_ARCH_SPEAR3XX) += spear3xx.o clock.o # spear300 specific files obj-$(CONFIG_MACH_SPEAR300) += spear300.o -# spear300 boards files -obj-$(CONFIG_BOARD_SPEAR300_EVB) += spear300_evb.o - - # spear310 specific files obj-$(CONFIG_MACH_SPEAR310) += spear310.o -# spear310 boards files -obj-$(CONFIG_BOARD_SPEAR310_EVB) += spear310_evb.o - - # spear320 specific files obj-$(CONFIG_MACH_SPEAR320) += spear320.o - -# spear320 boards files -obj-$(CONFIG_BOARD_SPEAR320_EVB) += spear320_evb.o diff --git a/arch/arm/mach-spear3xx/Makefile.boot b/arch/arm/mach-spear3xx/Makefile.boot index 4674a4c221db..d93e2177e6ec 100644 --- a/arch/arm/mach-spear3xx/Makefile.boot +++ b/arch/arm/mach-spear3xx/Makefile.boot @@ -1,3 +1,7 @@ zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 + +dtb-$(CONFIG_MACH_SPEAR300) += spear300-evb.dtb +dtb-$(CONFIG_MACH_SPEAR310) += spear310-evb.dtb +dtb-$(CONFIG_MACH_SPEAR320) += spear320-evb.dtb diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c index 47d4535b6f59..9293c144b24a 100644 --- a/arch/arm/mach-spear3xx/clock.c +++ b/arch/arm/mach-spear3xx/clock.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -673,11 +674,11 @@ static struct clk_lookup spear_clk_lookups[] = { CLKDEV_INIT(NULL, "osc_32k_clk", &osc_32k_clk), CLKDEV_INIT(NULL, "osc_24m_clk", &osc_24m_clk), /* clock derived from 32 KHz osc clk */ - CLKDEV_INIT("rtc-spear", NULL, &rtc_clk), + CLKDEV_INIT("fc900000.rtc", NULL, &rtc_clk), /* clock derived from 24 MHz osc clk */ CLKDEV_INIT(NULL, "pll1_clk", &pll1_clk), CLKDEV_INIT(NULL, "pll3_48m_clk", &pll3_48m_clk), - CLKDEV_INIT("wdt", NULL, &wdt_clk), + CLKDEV_INIT("fc880000.wdt", NULL, &wdt_clk), /* clock derived from pll1 clk */ CLKDEV_INIT(NULL, "cpu_clk", &cpu_clk), CLKDEV_INIT(NULL, "ahb_clk", &ahb_clk), @@ -686,7 +687,7 @@ static struct clk_lookup spear_clk_lookups[] = { CLKDEV_INIT(NULL, "gpt0_synth_clk", &gpt0_synth_clk), CLKDEV_INIT(NULL, "gpt1_synth_clk", &gpt1_synth_clk), CLKDEV_INIT(NULL, "gpt2_synth_clk", &gpt2_synth_clk), - CLKDEV_INIT("uart", NULL, &uart_clk), + CLKDEV_INIT("d0000000.serial", NULL, &uart_clk), CLKDEV_INIT("firda", NULL, &firda_clk), CLKDEV_INIT("gpt0", NULL, &gpt0_clk), CLKDEV_INIT("gpt1", NULL, &gpt1_clk), @@ -699,81 +700,95 @@ static struct clk_lookup spear_clk_lookups[] = { CLKDEV_INIT(NULL, "usbh.1_clk", &usbh1_clk), /* clock derived from ahb clk */ CLKDEV_INIT(NULL, "apb_clk", &apb_clk), - CLKDEV_INIT("i2c_designware.0", NULL, &i2c_clk), + CLKDEV_INIT("d0180000.i2c", NULL, &i2c_clk), CLKDEV_INIT("dma", NULL, &dma_clk), CLKDEV_INIT("jpeg", NULL, &jpeg_clk), - CLKDEV_INIT("gmac", NULL, &gmac_clk), - CLKDEV_INIT("smi", NULL, &smi_clk), + CLKDEV_INIT("e0800000.eth", NULL, &gmac_clk), + CLKDEV_INIT("fc000000.flash", NULL, &smi_clk), CLKDEV_INIT("c3", NULL, &c3_clk), /* clock derived from apb clk */ CLKDEV_INIT("adc", NULL, &adc_clk), - CLKDEV_INIT("ssp-pl022.0", NULL, &ssp0_clk), - CLKDEV_INIT("gpio", NULL, &gpio_clk), + CLKDEV_INIT("d0100000.spi", NULL, &ssp0_clk), + CLKDEV_INIT("fc980000.gpio", NULL, &gpio_clk), }; /* array of all spear 300 clock lookups */ #ifdef CONFIG_MACH_SPEAR300 static struct clk_lookup spear300_clk_lookups[] = { - CLKDEV_INIT("clcd", NULL, &clcd_clk), - CLKDEV_INIT("fsmc", NULL, &fsmc_clk), - CLKDEV_INIT("gpio1", NULL, &gpio1_clk), - CLKDEV_INIT("keyboard", NULL, &kbd_clk), - CLKDEV_INIT("sdhci", NULL, &sdhci_clk), + CLKDEV_INIT("60000000.clcd", NULL, &clcd_clk), + CLKDEV_INIT("94000000.flash", NULL, &fsmc_clk), + CLKDEV_INIT("a9000000.gpio", NULL, &gpio1_clk), + CLKDEV_INIT("a0000000.kbd", NULL, &kbd_clk), + CLKDEV_INIT("70000000.sdhci", NULL, &sdhci_clk), }; + +void __init spear300_clk_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++) + clk_register(&spear_clk_lookups[i]); + + for (i = 0; i < ARRAY_SIZE(spear300_clk_lookups); i++) + clk_register(&spear300_clk_lookups[i]); + + clk_init(); +} #endif /* array of all spear 310 clock lookups */ #ifdef CONFIG_MACH_SPEAR310 static struct clk_lookup spear310_clk_lookups[] = { - CLKDEV_INIT("fsmc", NULL, &fsmc_clk), + CLKDEV_INIT("44000000.flash", NULL, &fsmc_clk), CLKDEV_INIT(NULL, "emi", &emi_clk), - CLKDEV_INIT("uart1", NULL, &uart1_clk), - CLKDEV_INIT("uart2", NULL, &uart2_clk), - CLKDEV_INIT("uart3", NULL, &uart3_clk), - CLKDEV_INIT("uart4", NULL, &uart4_clk), - CLKDEV_INIT("uart5", NULL, &uart5_clk), + CLKDEV_INIT("b2000000.serial", NULL, &uart1_clk), + CLKDEV_INIT("b2080000.serial", NULL, &uart2_clk), + CLKDEV_INIT("b2100000.serial", NULL, &uart3_clk), + CLKDEV_INIT("b2180000.serial", NULL, &uart4_clk), + CLKDEV_INIT("b2200000.serial", NULL, &uart5_clk), }; + +void __init spear310_clk_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++) + clk_register(&spear_clk_lookups[i]); + + for (i = 0; i < ARRAY_SIZE(spear310_clk_lookups); i++) + clk_register(&spear310_clk_lookups[i]); + + clk_init(); +} #endif /* array of all spear 320 clock lookups */ #ifdef CONFIG_MACH_SPEAR320 static struct clk_lookup spear320_clk_lookups[] = { - CLKDEV_INIT("clcd", NULL, &clcd_clk), - CLKDEV_INIT("fsmc", NULL, &fsmc_clk), - CLKDEV_INIT("i2c_designware.1", NULL, &i2c1_clk), + CLKDEV_INIT("90000000.clcd", NULL, &clcd_clk), + CLKDEV_INIT("4c000000.flash", NULL, &fsmc_clk), + CLKDEV_INIT("a7000000.i2c", NULL, &i2c1_clk), CLKDEV_INIT(NULL, "emi", &emi_clk), CLKDEV_INIT("pwm", NULL, &pwm_clk), - CLKDEV_INIT("sdhci", NULL, &sdhci_clk), + CLKDEV_INIT("70000000.sdhci", NULL, &sdhci_clk), CLKDEV_INIT("c_can_platform.0", NULL, &can0_clk), CLKDEV_INIT("c_can_platform.1", NULL, &can1_clk), - CLKDEV_INIT("ssp-pl022.1", NULL, &ssp1_clk), - CLKDEV_INIT("ssp-pl022.2", NULL, &ssp2_clk), - CLKDEV_INIT("uart1", NULL, &uart1_clk), - CLKDEV_INIT("uart2", NULL, &uart2_clk), + CLKDEV_INIT("a5000000.spi", NULL, &ssp1_clk), + CLKDEV_INIT("a6000000.spi", NULL, &ssp2_clk), + CLKDEV_INIT("a3000000.serial", NULL, &uart1_clk), + CLKDEV_INIT("a4000000.serial", NULL, &uart2_clk), }; -#endif -void __init spear3xx_clk_init(void) +void __init spear320_clk_init(void) { - int i, cnt; - struct clk_lookup *lookups; - - if (machine_is_spear300()) { - cnt = ARRAY_SIZE(spear300_clk_lookups); - lookups = spear300_clk_lookups; - } else if (machine_is_spear310()) { - cnt = ARRAY_SIZE(spear310_clk_lookups); - lookups = spear310_clk_lookups; - } else { - cnt = ARRAY_SIZE(spear320_clk_lookups); - lookups = spear320_clk_lookups; - } + int i; for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++) clk_register(&spear_clk_lookups[i]); - for (i = 0; i < cnt; i++) - clk_register(&lookups[i]); + for (i = 0; i < ARRAY_SIZE(spear320_clk_lookups); i++) + clk_register(&spear320_clk_lookups[i]); clk_init(); } +#endif diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h index 14276e5a98d2..84ee2bbf1338 100644 --- a/arch/arm/mach-spear3xx/include/mach/generic.h +++ b/arch/arm/mach-spear3xx/include/mach/generic.h @@ -31,16 +31,13 @@ #define SPEAR_GPT0_CHAN1_IRQ SPEAR3XX_IRQ_CPU_GPT1_2 /* Add spear3xx family device structure declarations here */ -extern struct amba_device spear3xx_gpio_device; -extern struct amba_device spear3xx_uart_device; extern struct sys_timer spear3xx_timer; +extern struct pl022_ssp_controller pl022_plat_data; /* Add spear3xx family function declarations here */ -void __init spear3xx_clk_init(void); void __init spear_setup_timer(void); void __init spear3xx_map_io(void); -void __init spear3xx_init_irq(void); -void __init spear3xx_init(void); +void __init spear3xx_dt_init_irq(void); void spear_restart(char, const char *); @@ -99,9 +96,6 @@ extern struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50; /* spear300 declarations */ #ifdef CONFIG_MACH_SPEAR300 -/* Add spear300 machine device structure declarations here */ -extern struct amba_device spear300_gpio1_device; - /* pad mux modes */ extern struct pmx_mode spear300_nand_mode; extern struct pmx_mode spear300_nor_mode; @@ -133,16 +127,13 @@ extern struct pmx_dev spear300_pmx_telecom_sdhci_4bit; extern struct pmx_dev spear300_pmx_telecom_sdhci_8bit; extern struct pmx_dev spear300_pmx_gpio1; -/* Add spear300 machine function declarations here */ -void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, - u8 pmx_dev_count); +/* Add spear300 machine declarations here */ +void __init spear300_clk_init(void); #endif /* CONFIG_MACH_SPEAR300 */ /* spear310 declarations */ #ifdef CONFIG_MACH_SPEAR310 -/* Add spear310 machine device structure declarations here */ - /* pad mux devices */ extern struct pmx_dev spear310_pmx_emi_cs_0_1_4_5; extern struct pmx_dev spear310_pmx_emi_cs_2_3; @@ -153,16 +144,13 @@ extern struct pmx_dev spear310_pmx_fsmc; extern struct pmx_dev spear310_pmx_rs485_0_1; extern struct pmx_dev spear310_pmx_tdm0; -/* Add spear310 machine function declarations here */ -void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, - u8 pmx_dev_count); +/* Add spear310 machine declarations here */ +void __init spear310_clk_init(void); #endif /* CONFIG_MACH_SPEAR310 */ /* spear320 declarations */ #ifdef CONFIG_MACH_SPEAR320 -/* Add spear320 machine device structure declarations here */ - /* pad mux modes */ extern struct pmx_mode spear320_auto_net_smii_mode; extern struct pmx_mode spear320_auto_net_mii_mode; @@ -193,9 +181,8 @@ extern struct pmx_dev spear320_pmx_smii0; extern struct pmx_dev spear320_pmx_smii1; extern struct pmx_dev spear320_pmx_i2c1; -/* Add spear320 machine function declarations here */ -void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, - u8 pmx_dev_count); +/* Add spear320 machine declarations here */ +void __init spear320_clk_init(void); #endif /* CONFIG_MACH_SPEAR320 */ diff --git a/arch/arm/mach-spear3xx/include/mach/hardware.h b/arch/arm/mach-spear3xx/include/mach/hardware.h index 4660c0d8ec0d..defa374f5bee 100644 --- a/arch/arm/mach-spear3xx/include/mach/hardware.h +++ b/arch/arm/mach-spear3xx/include/mach/hardware.h @@ -17,7 +17,4 @@ #include #include -/* Vitual to physical translation of statically mapped space */ -#define IO_ADDRESS(x) (x | 0xF0000000) - #endif /* __MACH_HARDWARE_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h index 63fd98356919..8e3900aa0d45 100644 --- a/arch/arm/mach-spear3xx/include/mach/spear.h +++ b/arch/arm/mach-spear3xx/include/mach/spear.h @@ -25,8 +25,9 @@ /* ICM1 - Low speed connection */ #define SPEAR3XX_ICM1_2_BASE UL(0xD0000000) +#define VA_SPEAR3XX_ICM1_2_BASE UL(0xFD000000) #define SPEAR3XX_ICM1_UART_BASE UL(0xD0000000) -#define VA_SPEAR3XX_ICM1_UART_BASE IO_ADDRESS(SPEAR3XX_ICM1_UART_BASE) +#define VA_SPEAR3XX_ICM1_UART_BASE (VA_SPEAR3XX_ICM1_2_BASE | SPEAR3XX_ICM1_UART_BASE) #define SPEAR3XX_ICM1_ADC_BASE UL(0xD0080000) #define SPEAR3XX_ICM1_SSP_BASE UL(0xD0100000) #define SPEAR3XX_ICM1_I2C_BASE UL(0xD0180000) @@ -53,11 +54,11 @@ #define SPEAR3XX_ICM3_ML1_2_BASE UL(0xF0000000) #define SPEAR3XX_ML1_TMR_BASE UL(0xF0000000) #define SPEAR3XX_ML1_VIC_BASE UL(0xF1100000) -#define VA_SPEAR3XX_ML1_VIC_BASE IO_ADDRESS(SPEAR3XX_ML1_VIC_BASE) /* ICM3 - Basic Subsystem */ #define SPEAR3XX_ICM3_SMEM_BASE UL(0xF8000000) #define SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000) +#define VA_SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000) #define SPEAR3XX_ICM3_DMA_BASE UL(0xFC400000) #define SPEAR3XX_ICM3_SDRAM_CTRL_BASE UL(0xFC600000) #define SPEAR3XX_ICM3_TMR0_BASE UL(0xFC800000) @@ -65,9 +66,9 @@ #define SPEAR3XX_ICM3_RTC_BASE UL(0xFC900000) #define SPEAR3XX_ICM3_GPIO_BASE UL(0xFC980000) #define SPEAR3XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000) -#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE IO_ADDRESS(SPEAR3XX_ICM3_SYS_CTRL_BASE) +#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE (VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_SYS_CTRL_BASE) #define SPEAR3XX_ICM3_MISC_REG_BASE UL(0xFCA80000) -#define VA_SPEAR3XX_ICM3_MISC_REG_BASE IO_ADDRESS(SPEAR3XX_ICM3_MISC_REG_BASE) +#define VA_SPEAR3XX_ICM3_MISC_REG_BASE (VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_MISC_REG_BASE) #define SPEAR3XX_ICM3_TMR1_BASE UL(0xFCB00000) /* Debug uart for linux, will be used for debug and uncompress messages */ diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index adee72bb68ec..c876c6a2caad 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -3,8 +3,8 @@ * * SPEAr300 machine source file * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar + * Copyright (C) 2009-2012 ST Microelectronics + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -13,10 +13,9 @@ #define pr_fmt(fmt) "SPEAr300: " fmt -#include -#include -#include -#include +#include +#include +#include #include #include #include @@ -425,24 +424,35 @@ static struct spear_shirq shirq_ras1 = { }, }; -/* Add spear300 specific devices here */ -/* arm gpio1 device registration */ -static struct pl061_platform_data gpio1_plat_data = { - .gpio_base = 8, - .irq_base = SPEAR300_GPIO1_INT_BASE, +/* padmux devices to enable */ +static struct pmx_dev *spear300_evb_pmx_devs[] = { + /* spear3xx specific devices */ + &spear3xx_pmx_i2c, + &spear3xx_pmx_ssp_cs, + &spear3xx_pmx_ssp, + &spear3xx_pmx_mii, + &spear3xx_pmx_uart0, + + /* spear300 specific devices */ + &spear300_pmx_fsmc_2_chips, + &spear300_pmx_clcd, + &spear300_pmx_telecom_sdhci_4bit, + &spear300_pmx_gpio1, }; -AMBA_APB_DEVICE(spear300_gpio1, "gpio1", 0, SPEAR300_GPIO_BASE, - {SPEAR300_VIRQ_GPIO1}, &gpio1_plat_data); +/* Add SPEAr300 auxdata to pass platform data */ +static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL, + &pl022_plat_data), + {} +}; -/* spear300 routines */ -void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, - u8 pmx_dev_count) +static void __init spear300_dt_init(void) { - int ret = 0; + int ret = -EINVAL; - /* call spear3xx family common init function */ - spear3xx_init(); + of_platform_populate(NULL, of_default_bus_match_table, + spear300_auxdata_lookup, NULL); /* shared irq registration */ shirq_ras1.regs.base = ioremap(SPEAR300_TELECOM_BASE, SZ_4K); @@ -452,18 +462,45 @@ void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, pr_err("Error registering Shared IRQ\n"); } - /* pmx initialization */ - pmx_driver.mode = pmx_mode; - pmx_driver.devs = pmx_devs; - pmx_driver.devs_count = pmx_dev_count; + if (of_machine_is_compatible("st,spear300-evb")) { + /* pmx initialization */ + pmx_driver.mode = &spear300_photo_frame_mode; + pmx_driver.devs = spear300_evb_pmx_devs; + pmx_driver.devs_count = ARRAY_SIZE(spear300_evb_pmx_devs); + + pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K); + if (pmx_driver.base) { + ret = pmx_register(&pmx_driver); + if (ret) + pr_err("padmux: registration failed. err no: %d\n", + ret); + /* Free Mapping, device selection already done */ + iounmap(pmx_driver.base); + } - pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K); - if (pmx_driver.base) { - ret = pmx_register(&pmx_driver); if (ret) - pr_err("padmux: registration failed. err no: %d\n", - ret); - /* Free Mapping, device selection already done */ - iounmap(pmx_driver.base); + pr_err("Initialization Failed"); } } + +static const char * const spear300_dt_board_compat[] = { + "st,spear300", + "st,spear300-evb", + NULL, +}; + +static void __init spear300_map_io(void) +{ + spear3xx_map_io(); + spear300_clk_init(); +} + +DT_MACHINE_START(SPEAR300_DT, "ST SPEAr300 SoC with Flattened Device Tree") + .map_io = spear300_map_io, + .init_irq = spear3xx_dt_init_irq, + .handle_irq = vic_handle_irq, + .timer = &spear3xx_timer, + .init_machine = spear300_dt_init, + .restart = spear_restart, + .dt_compat = spear300_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c deleted file mode 100644 index 3462ab9d6122..000000000000 --- a/arch/arm/mach-spear3xx/spear300_evb.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * arch/arm/mach-spear3xx/spear300_evb.c - * - * SPEAr300 evaluation board source file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include - -/* padmux devices to enable */ -static struct pmx_dev *pmx_devs[] = { - /* spear3xx specific devices */ - &spear3xx_pmx_i2c, - &spear3xx_pmx_ssp_cs, - &spear3xx_pmx_ssp, - &spear3xx_pmx_mii, - &spear3xx_pmx_uart0, - - /* spear300 specific devices */ - &spear300_pmx_fsmc_2_chips, - &spear300_pmx_clcd, - &spear300_pmx_telecom_sdhci_4bit, - &spear300_pmx_gpio1, -}; - -static struct amba_device *amba_devs[] __initdata = { - /* spear3xx specific devices */ - &spear3xx_gpio_device, - &spear3xx_uart_device, - - /* spear300 specific devices */ - &spear300_gpio1_device, -}; - -static struct platform_device *plat_devs[] __initdata = { - /* spear3xx specific devices */ - - /* spear300 specific devices */ -}; - -static void __init spear300_evb_init(void) -{ - unsigned int i; - - /* call spear300 machine init function */ - spear300_init(&spear300_photo_frame_mode, pmx_devs, - ARRAY_SIZE(pmx_devs)); - - /* Add Platform Devices */ - platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs)); - - /* Add Amba Devices */ - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) - amba_device_register(amba_devs[i], &iomem_resource); -} - -MACHINE_START(SPEAR300, "ST-SPEAR300-EVB") - .atag_offset = 0x100, - .map_io = spear3xx_map_io, - .init_irq = spear3xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &spear3xx_timer, - .init_machine = spear300_evb_init, - .restart = spear_restart, -MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c index b7c28764df92..641fd4cf6bc7 100644 --- a/arch/arm/mach-spear3xx/spear310.c +++ b/arch/arm/mach-spear3xx/spear310.c @@ -3,8 +3,8 @@ * * SPEAr310 machine source file * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar + * Copyright (C) 2009-2012 ST Microelectronics + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -13,8 +13,11 @@ #define pr_fmt(fmt) "SPEAr310: " fmt -#include -#include +#include +#include +#include +#include +#include #include #include #include @@ -257,17 +260,79 @@ static struct spear_shirq shirq_intrcomm_ras = { }, }; -/* Add spear310 specific devices here */ +/* padmux devices to enable */ +static struct pmx_dev *spear310_evb_pmx_devs[] = { + /* spear3xx specific devices */ + &spear3xx_pmx_i2c, + &spear3xx_pmx_ssp, + &spear3xx_pmx_gpio_pin0, + &spear3xx_pmx_gpio_pin1, + &spear3xx_pmx_gpio_pin2, + &spear3xx_pmx_gpio_pin3, + &spear3xx_pmx_gpio_pin4, + &spear3xx_pmx_gpio_pin5, + &spear3xx_pmx_uart0, + + /* spear310 specific devices */ + &spear310_pmx_emi_cs_0_1_4_5, + &spear310_pmx_emi_cs_2_3, + &spear310_pmx_uart1, + &spear310_pmx_uart2, + &spear310_pmx_uart3_4_5, + &spear310_pmx_fsmc, + &spear310_pmx_rs485_0_1, + &spear310_pmx_tdm0, +}; + +/* uart devices plat data */ +static struct amba_pl011_data spear310_uart_data[] = { + { + .dma_filter = pl08x_filter_id, + .dma_tx_param = "uart1_tx", + .dma_rx_param = "uart1_rx", + }, { + .dma_filter = pl08x_filter_id, + .dma_tx_param = "uart2_tx", + .dma_rx_param = "uart2_rx", + }, { + .dma_filter = pl08x_filter_id, + .dma_tx_param = "uart3_tx", + .dma_rx_param = "uart3_rx", + }, { + .dma_filter = pl08x_filter_id, + .dma_tx_param = "uart4_tx", + .dma_rx_param = "uart4_rx", + }, { + .dma_filter = pl08x_filter_id, + .dma_tx_param = "uart5_tx", + .dma_rx_param = "uart5_rx", + }, +}; -/* spear310 routines */ -void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, - u8 pmx_dev_count) +/* Add SPEAr310 auxdata to pass platform data */ +static struct of_dev_auxdata spear310_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL, + &pl022_plat_data), + OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART1_BASE, NULL, + &spear310_uart_data[0]), + OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART2_BASE, NULL, + &spear310_uart_data[1]), + OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART3_BASE, NULL, + &spear310_uart_data[2]), + OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART4_BASE, NULL, + &spear310_uart_data[3]), + OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART5_BASE, NULL, + &spear310_uart_data[4]), + {} +}; + +static void __init spear310_dt_init(void) { void __iomem *base; int ret = 0; - /* call spear3xx family common init function */ - spear3xx_init(); + of_platform_populate(NULL, of_default_bus_match_table, + spear310_auxdata_lookup, NULL); /* shared irq registration */ base = ioremap(SPEAR310_SOC_CONFIG_BASE, SZ_4K); @@ -297,13 +362,38 @@ void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, pr_err("Error registering Shared IRQ 4\n"); } - /* pmx initialization */ - pmx_driver.base = base; - pmx_driver.mode = pmx_mode; - pmx_driver.devs = pmx_devs; - pmx_driver.devs_count = pmx_dev_count; + if (of_machine_is_compatible("st,spear310-evb")) { + /* pmx initialization */ + pmx_driver.base = base; + pmx_driver.mode = NULL; + pmx_driver.devs = spear310_evb_pmx_devs; + pmx_driver.devs_count = ARRAY_SIZE(spear310_evb_pmx_devs); - ret = pmx_register(&pmx_driver); - if (ret) - pr_err("padmux: registration failed. err no: %d\n", ret); + ret = pmx_register(&pmx_driver); + if (ret) + pr_err("padmux: registration failed. err no: %d\n", + ret); + } } + +static const char * const spear310_dt_board_compat[] = { + "st,spear310", + "st,spear310-evb", + NULL, +}; + +static void __init spear310_map_io(void) +{ + spear3xx_map_io(); + spear310_clk_init(); +} + +DT_MACHINE_START(SPEAR310_DT, "ST SPEAr310 SoC with Flattened Device Tree") + .map_io = spear310_map_io, + .init_irq = spear3xx_dt_init_irq, + .handle_irq = vic_handle_irq, + .timer = &spear3xx_timer, + .init_machine = spear310_dt_init, + .restart = spear_restart, + .dt_compat = spear310_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c deleted file mode 100644 index f92c4993f65a..000000000000 --- a/arch/arm/mach-spear3xx/spear310_evb.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * arch/arm/mach-spear3xx/spear310_evb.c - * - * SPEAr310 evaluation board source file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include - -/* padmux devices to enable */ -static struct pmx_dev *pmx_devs[] = { - /* spear3xx specific devices */ - &spear3xx_pmx_i2c, - &spear3xx_pmx_ssp, - &spear3xx_pmx_gpio_pin0, - &spear3xx_pmx_gpio_pin1, - &spear3xx_pmx_gpio_pin2, - &spear3xx_pmx_gpio_pin3, - &spear3xx_pmx_gpio_pin4, - &spear3xx_pmx_gpio_pin5, - &spear3xx_pmx_uart0, - - /* spear310 specific devices */ - &spear310_pmx_emi_cs_0_1_4_5, - &spear310_pmx_emi_cs_2_3, - &spear310_pmx_uart1, - &spear310_pmx_uart2, - &spear310_pmx_uart3_4_5, - &spear310_pmx_fsmc, - &spear310_pmx_rs485_0_1, - &spear310_pmx_tdm0, -}; - -static struct amba_device *amba_devs[] __initdata = { - /* spear3xx specific devices */ - &spear3xx_gpio_device, - &spear3xx_uart_device, - - /* spear310 specific devices */ -}; - -static struct platform_device *plat_devs[] __initdata = { - /* spear3xx specific devices */ - - /* spear310 specific devices */ -}; - -static void __init spear310_evb_init(void) -{ - unsigned int i; - - /* call spear310 machine init function */ - spear310_init(NULL, pmx_devs, ARRAY_SIZE(pmx_devs)); - - /* Add Platform Devices */ - platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs)); - - /* Add Amba Devices */ - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) - amba_device_register(amba_devs[i], &iomem_resource); -} - -MACHINE_START(SPEAR310, "ST-SPEAR310-EVB") - .atag_offset = 0x100, - .map_io = spear3xx_map_io, - .init_irq = spear3xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &spear3xx_timer, - .init_machine = spear310_evb_init, - .restart = spear_restart, -MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index 7bd39c0032bd..9c571d0f20c3 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -3,8 +3,8 @@ * * SPEAr320 machine source file * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar + * Copyright (C) 2009-2012 ST Microelectronics + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -13,8 +13,12 @@ #define pr_fmt(fmt) "SPEAr320: " fmt -#include -#include +#include +#include +#include +#include +#include +#include #include #include #include @@ -510,17 +514,79 @@ static struct spear_shirq shirq_intrcomm_ras = { }, }; -/* Add spear320 specific devices here */ +/* padmux devices to enable */ +static struct pmx_dev *spear320_evb_pmx_devs[] = { + /* spear3xx specific devices */ + &spear3xx_pmx_i2c, + &spear3xx_pmx_ssp, + &spear3xx_pmx_mii, + &spear3xx_pmx_uart0, + + /* spear320 specific devices */ + &spear320_pmx_fsmc, + &spear320_pmx_sdhci, + &spear320_pmx_i2s, + &spear320_pmx_uart1, + &spear320_pmx_uart2, + &spear320_pmx_can, + &spear320_pmx_pwm0, + &spear320_pmx_pwm1, + &spear320_pmx_pwm2, + &spear320_pmx_mii1, +}; + +static struct pl022_ssp_controller spear320_ssp_data[] = { + { + .bus_id = 1, + .enable_dma = 1, + .dma_filter = pl08x_filter_id, + .dma_tx_param = "ssp1_tx", + .dma_rx_param = "ssp1_rx", + .num_chipselect = 2, + }, { + .bus_id = 2, + .enable_dma = 1, + .dma_filter = pl08x_filter_id, + .dma_tx_param = "ssp2_tx", + .dma_rx_param = "ssp2_rx", + .num_chipselect = 2, + } +}; + +static struct amba_pl011_data spear320_uart_data[] = { + { + .dma_filter = pl08x_filter_id, + .dma_tx_param = "uart1_tx", + .dma_rx_param = "uart1_rx", + }, { + .dma_filter = pl08x_filter_id, + .dma_tx_param = "uart2_tx", + .dma_rx_param = "uart2_rx", + }, +}; -/* spear320 routines */ -void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, - u8 pmx_dev_count) +/* Add SPEAr310 auxdata to pass platform data */ +static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL, + &pl022_plat_data), + OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP0_BASE, NULL, + &spear320_ssp_data[0]), + OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP1_BASE, NULL, + &spear320_ssp_data[1]), + OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART1_BASE, NULL, + &spear320_uart_data[0]), + OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART2_BASE, NULL, + &spear320_uart_data[1]), + {} +}; + +static void __init spear320_dt_init(void) { void __iomem *base; int ret = 0; - /* call spear3xx family common init function */ - spear3xx_init(); + of_platform_populate(NULL, of_default_bus_match_table, + spear320_auxdata_lookup, NULL); /* shared irq registration */ base = ioremap(SPEAR320_SOC_CONFIG_BASE, SZ_4K); @@ -544,13 +610,38 @@ void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, pr_err("Error registering Shared IRQ 4\n"); } - /* pmx initialization */ - pmx_driver.base = base; - pmx_driver.mode = pmx_mode; - pmx_driver.devs = pmx_devs; - pmx_driver.devs_count = pmx_dev_count; + if (of_machine_is_compatible("st,spear320-evb")) { + /* pmx initialization */ + pmx_driver.base = base; + pmx_driver.mode = &spear320_auto_net_mii_mode; + pmx_driver.devs = spear320_evb_pmx_devs; + pmx_driver.devs_count = ARRAY_SIZE(spear320_evb_pmx_devs); - ret = pmx_register(&pmx_driver); - if (ret) - pr_err("padmux: registration failed. err no: %d\n", ret); + ret = pmx_register(&pmx_driver); + if (ret) + pr_err("padmux: registration failed. err no: %d\n", + ret); + } } + +static const char * const spear320_dt_board_compat[] = { + "st,spear320", + "st,spear320-evb", + NULL, +}; + +static void __init spear320_map_io(void) +{ + spear3xx_map_io(); + spear320_clk_init(); +} + +DT_MACHINE_START(SPEAR320_DT, "ST SPEAr320 SoC with Flattened Device Tree") + .map_io = spear320_map_io, + .init_irq = spear3xx_dt_init_irq, + .handle_irq = vic_handle_irq, + .timer = &spear3xx_timer, + .init_machine = spear320_dt_init, + .restart = spear_restart, + .dt_compat = spear320_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c deleted file mode 100644 index 105334ab7021..000000000000 --- a/arch/arm/mach-spear3xx/spear320_evb.c +++ /dev/null @@ -1,79 +0,0 @@ -/* - * arch/arm/mach-spear3xx/spear320_evb.c - * - * SPEAr320 evaluation board source file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include - -/* padmux devices to enable */ -static struct pmx_dev *pmx_devs[] = { - /* spear3xx specific devices */ - &spear3xx_pmx_i2c, - &spear3xx_pmx_ssp, - &spear3xx_pmx_mii, - &spear3xx_pmx_uart0, - - /* spear320 specific devices */ - &spear320_pmx_fsmc, - &spear320_pmx_sdhci, - &spear320_pmx_i2s, - &spear320_pmx_uart1, - &spear320_pmx_uart2, - &spear320_pmx_can, - &spear320_pmx_pwm0, - &spear320_pmx_pwm1, - &spear320_pmx_pwm2, - &spear320_pmx_mii1, -}; - -static struct amba_device *amba_devs[] __initdata = { - /* spear3xx specific devices */ - &spear3xx_gpio_device, - &spear3xx_uart_device, - - /* spear320 specific devices */ -}; - -static struct platform_device *plat_devs[] __initdata = { - /* spear3xx specific devices */ - - /* spear320 specific devices */ -}; - -static void __init spear320_evb_init(void) -{ - unsigned int i; - - /* call spear320 machine init function */ - spear320_init(&spear320_auto_net_mii_mode, pmx_devs, - ARRAY_SIZE(pmx_devs)); - - /* Add Platform Devices */ - platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs)); - - /* Add Amba Devices */ - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) - amba_device_register(amba_devs[i], &iomem_resource); -} - -MACHINE_START(SPEAR320, "ST-SPEAR320-EVB") - .atag_offset = 0x100, - .map_io = spear3xx_map_io, - .init_irq = spear3xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &spear3xx_timer, - .init_machine = spear320_evb_init, - .restart = spear_restart, -MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index a236925e13b3..a94d8c12ed99 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -3,8 +3,8 @@ * * SPEAr3XX machines common source file * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar + * Copyright (C) 2009-2012 ST Microelectronics + * Viresh Kumar * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -13,76 +13,14 @@ #define pr_fmt(fmt) "SPEAr3xx: " fmt -#include -#include -#include +#include +#include +#include #include #include -#include -#include #include #include -/* Add spear3xx machines common devices here */ -/* gpio device registration */ -static struct pl061_platform_data gpio_plat_data = { - .gpio_base = 0, - .irq_base = SPEAR3XX_GPIO_INT_BASE, -}; - -AMBA_APB_DEVICE(spear3xx_gpio, "gpio", 0, SPEAR3XX_ICM3_GPIO_BASE, - {SPEAR3XX_IRQ_BASIC_GPIO}, &gpio_plat_data); - -/* uart device registration */ -AMBA_APB_DEVICE(spear3xx_uart, "uart", 0, SPEAR3XX_ICM1_UART_BASE, - {SPEAR3XX_IRQ_UART}, NULL); - -/* Do spear3xx familiy common initialization part here */ -void __init spear3xx_init(void) -{ - /* nothing to do for now */ -} - -/* This will initialize vic */ -void __init spear3xx_init_irq(void) -{ - vic_init((void __iomem *)VA_SPEAR3XX_ML1_VIC_BASE, 0, ~0, 0); -} - -/* Following will create static virtual/physical mappings */ -struct map_desc spear3xx_io_desc[] __initdata = { - { - .virtual = VA_SPEAR3XX_ICM1_UART_BASE, - .pfn = __phys_to_pfn(SPEAR3XX_ICM1_UART_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { - .virtual = VA_SPEAR3XX_ML1_VIC_BASE, - .pfn = __phys_to_pfn(SPEAR3XX_ML1_VIC_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { - .virtual = VA_SPEAR3XX_ICM3_SYS_CTRL_BASE, - .pfn = __phys_to_pfn(SPEAR3XX_ICM3_SYS_CTRL_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { - .virtual = VA_SPEAR3XX_ICM3_MISC_REG_BASE, - .pfn = __phys_to_pfn(SPEAR3XX_ICM3_MISC_REG_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, -}; - -/* This will create static memory mapping for selected devices */ -void __init spear3xx_map_io(void) -{ - iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc)); - - /* This will initialize clock framework */ - spear3xx_clk_init(); -} - /* pad multiplexing support */ /* devices */ static struct pmx_dev_mode pmx_firda_modes[] = { @@ -508,6 +446,51 @@ struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50 = { }; #endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */ +/* ssp device registration */ +struct pl022_ssp_controller pl022_plat_data = { + .bus_id = 0, + .enable_dma = 1, + .dma_filter = pl08x_filter_id, + .dma_tx_param = "ssp0_tx", + .dma_rx_param = "ssp0_rx", + /* + * This is number of spi devices that can be connected to spi. There are + * two type of chipselects on which slave devices can work. One is chip + * select provided by spi masters other is controlled through external + * gpio's. We can't use chipselect provided from spi master (because as + * soon as FIFO becomes empty, CS is disabled and transfer ends). So + * this number now depends on number of gpios available for spi. each + * slave on each master requires a separate gpio pin. + */ + .num_chipselect = 2, +}; + +/* + * Following will create 16MB static virtual/physical mappings + * PHYSICAL VIRTUAL + * 0xD0000000 0xFD000000 + * 0xFC000000 0xFC000000 + */ +struct map_desc spear3xx_io_desc[] __initdata = { + { + .virtual = VA_SPEAR3XX_ICM1_2_BASE, + .pfn = __phys_to_pfn(SPEAR3XX_ICM1_2_BASE), + .length = SZ_16M, + .type = MT_DEVICE + }, { + .virtual = VA_SPEAR3XX_ICM3_SMI_CTRL_BASE, + .pfn = __phys_to_pfn(SPEAR3XX_ICM3_SMI_CTRL_BASE), + .length = SZ_16M, + .type = MT_DEVICE + }, +}; + +/* This will create static memory mapping for selected devices */ +void __init spear3xx_map_io(void) +{ + iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc)); +} + static void __init spear3xx_timer_init(void) { char pclk_name[] = "pll3_48m_clk"; @@ -538,3 +521,13 @@ static void __init spear3xx_timer_init(void) struct sys_timer spear3xx_timer = { .init = spear3xx_timer_init, }; + +static const struct of_device_id vic_of_match[] __initconst = { + { .compatible = "arm,pl190-vic", .data = vic_of_init, }, + { /* Sentinel */ } +}; + +void __init spear3xx_dt_init_irq(void) +{ + of_irq_init(vic_of_match); +} diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig index 1bb3dbce8810..6c066fcb2979 100644 --- a/arch/arm/plat-spear/Kconfig +++ b/arch/arm/plat-spear/Kconfig @@ -9,9 +9,10 @@ choice default ARCH_SPEAR3XX config ARCH_SPEAR3XX - bool "SPEAr3XX" + bool "ST SPEAr3xx with Device Tree" select ARM_VIC select CPU_ARM926T + select USE_OF help Supports for ARM's SPEAR3XX family -- cgit v1.2.3-59-g8ed1b