From dd67b1556ebea118b40986cdb8e70874b5454442 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 14 Oct 2007 14:02:26 +0100 Subject: [MIPS] IP32: Fix build by conversion to irq_cpu.c. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 1 + arch/mips/sgi-ip32/ip32-irq.c | 162 +++++++++++++++++--------------------- arch/mips/sgi-ip32/ip32-setup.c | 2 +- include/asm-mips/ip32/ip32_ints.h | 158 +++++++++++++++++++++---------------- 4 files changed, 163 insertions(+), 160 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index f943736541cb..f921235239f9 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -410,6 +410,7 @@ config SGI_IP32 select BOOT_ELF32 select DMA_NONCOHERENT select HW_HAS_PCI + select IRQ_CPU select R5000_CPU_SCACHE select RM7000_CPU_SCACHE select SYS_HAS_CPU_R5000 diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c index 7f4b793c3df3..7e8094f617bf 100644 --- a/arch/mips/sgi-ip32/ip32-irq.c +++ b/arch/mips/sgi-ip32/ip32-irq.c @@ -20,6 +20,7 @@ #include #include +#include #include #include #include @@ -46,7 +47,8 @@ static void inline flush_mace_bus(void) #define DBG(x...) #endif -/* O2 irq map +/* + * O2 irq map * * IP0 -> software (ignored) * IP1 -> software (ignored) @@ -55,60 +57,60 @@ static void inline flush_mace_bus(void) * IP4 -> (irq2) X unknown * IP5 -> (irq3) X unknown * IP6 -> (irq4) X unknown - * IP7 -> (irq5) 0 CPU count/compare timer (system timer) + * IP7 -> (irq5) 7 CPU count/compare timer (system timer) * * crime: (C) * * CRIME_INT_STAT 31:0: * - * 0 -> 1 Video in 1 - * 1 -> 2 Video in 2 - * 2 -> 3 Video out - * 3 -> 4 Mace ethernet + * 0 -> 8 Video in 1 + * 1 -> 9 Video in 2 + * 2 -> 10 Video out + * 3 -> 11 Mace ethernet * 4 -> S SuperIO sub-interrupt * 5 -> M Miscellaneous sub-interrupt * 6 -> A Audio sub-interrupt - * 7 -> 8 PCI bridge errors - * 8 -> 9 PCI SCSI aic7xxx 0 - * 9 -> 10 PCI SCSI aic7xxx 1 - * 10 -> 11 PCI slot 0 - * 11 -> 12 unused (PCI slot 1) - * 12 -> 13 unused (PCI slot 2) - * 13 -> 14 unused (PCI shared 0) - * 14 -> 15 unused (PCI shared 1) - * 15 -> 16 unused (PCI shared 2) - * 16 -> 17 GBE0 (E) - * 17 -> 18 GBE1 (E) - * 18 -> 19 GBE2 (E) - * 19 -> 20 GBE3 (E) - * 20 -> 21 CPU errors - * 21 -> 22 Memory errors - * 22 -> 23 RE empty edge (E) - * 23 -> 24 RE full edge (E) - * 24 -> 25 RE idle edge (E) - * 25 -> 26 RE empty level - * 26 -> 27 RE full level - * 27 -> 28 RE idle level - * 28 -> 29 unused (software 0) (E) - * 29 -> 30 unused (software 1) (E) - * 30 -> 31 unused (software 2) - crime 1.5 CPU SysCorError (E) - * 31 -> 32 VICE + * 7 -> 15 PCI bridge errors + * 8 -> 16 PCI SCSI aic7xxx 0 + * 9 -> 17 PCI SCSI aic7xxx 1 + * 10 -> 18 PCI slot 0 + * 11 -> 19 unused (PCI slot 1) + * 12 -> 20 unused (PCI slot 2) + * 13 -> 21 unused (PCI shared 0) + * 14 -> 22 unused (PCI shared 1) + * 15 -> 23 unused (PCI shared 2) + * 16 -> 24 GBE0 (E) + * 17 -> 25 GBE1 (E) + * 18 -> 26 GBE2 (E) + * 19 -> 27 GBE3 (E) + * 20 -> 28 CPU errors + * 21 -> 29 Memory errors + * 22 -> 30 RE empty edge (E) + * 23 -> 31 RE full edge (E) + * 24 -> 32 RE idle edge (E) + * 25 -> 33 RE empty level + * 26 -> 34 RE full level + * 27 -> 35 RE idle level + * 28 -> 36 unused (software 0) (E) + * 29 -> 37 unused (software 1) (E) + * 30 -> 38 unused (software 2) - crime 1.5 CPU SysCorError (E) + * 31 -> 39 VICE * * S, M, A: Use the MACE ISA interrupt register * MACE_ISA_INT_STAT 31:0 * - * 0-7 -> 33-40 Audio - * 8 -> 41 RTC - * 9 -> 42 Keyboard + * 0-7 -> 40-47 Audio + * 8 -> 48 RTC + * 9 -> 49 Keyboard * 10 -> X Keyboard polled - * 11 -> 44 Mouse + * 11 -> 51 Mouse * 12 -> X Mouse polled - * 13-15 -> 46-48 Count/compare timers - * 16-19 -> 49-52 Parallel (16 E) - * 20-25 -> 53-58 Serial 1 (22 E) - * 26-31 -> 59-64 Serial 2 (28 E) + * 13-15 -> 53-55 Count/compare timers + * 16-19 -> 56-59 Parallel (16 E) + * 20-25 -> 60-62 Serial 1 (22 E) + * 26-31 -> 66-71 Serial 2 (28 E) * - * Note that this means IRQs 5-7, 43, and 45 do not exist. This is a + * Note that this means IRQs 12-14, 50, and 52 do not exist. This is a * different IRQ map than IRIX uses, but that's OK as Linux irq handling * is quite different anyway. */ @@ -130,36 +132,6 @@ struct irqaction cpuerr_irq = { .name = "CRIME CPU error", }; -/* - * For interrupts wired from a single device to the CPU. Only the clock - * uses this it seems, which is IRQ 0 and IP7. - */ - -static void enable_cpu_irq(unsigned int irq) -{ - set_c0_status(STATUSF_IP7); -} - -static void disable_cpu_irq(unsigned int irq) -{ - clear_c0_status(STATUSF_IP7); -} - -static void end_cpu_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - enable_cpu_irq(irq); -} - -static struct irq_chip ip32_cpu_interrupt = { - .name = "IP32 CPU", - .ack = disable_cpu_irq, - .mask = disable_cpu_irq, - .mask_ack = disable_cpu_irq, - .unmask = enable_cpu_irq, - .end = end_cpu_irq, -}; - /* * This is for pure CRIME interrupts - ie not MACE. The advantage? * We get to split the register in half and do faster lookups. @@ -422,15 +394,23 @@ static void ip32_irq0(void) uint64_t crime_int; int irq = 0; + /* + * Sanity check interrupt numbering enum. + * MACE got 32 interrupts and there are 32 MACE ISA interrupts daisy + * chained. + */ + BUILD_BUG_ON(CRIME_VICE_IRQ - MACE_VID_IN1_IRQ != 31); + BUILD_BUG_ON(MACEISA_SERIAL2_RDMAOR_IRQ - MACEISA_AUDIO_SW_IRQ != 31); + crime_int = crime->istat & crime_mask; - irq = __ffs(crime_int); + irq = MACE_VID_IN1_IRQ + __ffs(crime_int); crime_int = 1 << irq; if (crime_int & CRIME_MACEISA_INT_MASK) { unsigned long mace_int = mace->perif.ctrl.istat; - irq = __ffs(mace_int & maceisa_mask) + 32; + irq = __ffs(mace_int & maceisa_mask) + MACEISA_AUDIO_SW_IRQ; } - irq++; + DBG("*irq %u*\n", irq); do_IRQ(irq); } @@ -457,7 +437,7 @@ static void ip32_irq4(void) static void ip32_irq5(void) { - do_IRQ(IP32_R4K_TIMER_IRQ); + do_IRQ(MIPS_CPU_IRQ_BASE + 7); } asmlinkage void plat_irq_dispatch(void) @@ -490,21 +470,25 @@ void __init arch_init_irq(void) mace->perif.ctrl.istat = 0; mace->perif.ctrl.imask = 0; - for (irq = 0; irq <= IP32_IRQ_MAX; irq++) { - struct irq_chip *controller; - - if (irq == IP32_R4K_TIMER_IRQ) - controller = &ip32_cpu_interrupt; - else if (irq <= MACE_PCI_BRIDGE_IRQ && irq >= MACE_VID_IN1_IRQ) - controller = &ip32_mace_interrupt; - else if (irq <= MACEPCI_SHARED2_IRQ && irq >= MACEPCI_SCSI0_IRQ) - controller = &ip32_macepci_interrupt; - else if (irq <= CRIME_VICE_IRQ && irq >= CRIME_GBE0_IRQ) - controller = &ip32_crime_interrupt; - else - controller = &ip32_maceisa_interrupt; - - set_irq_chip(irq, controller); + mips_cpu_irq_init(); + for (irq = MIPS_CPU_IRQ_BASE + 8; irq <= IP32_IRQ_MAX; irq++) { + struct irq_chip *chip; + + switch (irq) { + case MACE_VID_IN1_IRQ ... MACE_PCI_BRIDGE_IRQ: + chip = &ip32_mace_interrupt; + break; + case MACEPCI_SCSI0_IRQ ... MACEPCI_SHARED2_IRQ: + chip = &ip32_macepci_interrupt; + break; + case CRIME_GBE0_IRQ ... CRIME_VICE_IRQ: + chip = &ip32_crime_interrupt; + break; + default: + chip = &ip32_maceisa_interrupt; + } + + set_irq_chip(irq, chip); } setup_irq(CRIME_MEMERR_IRQ, &memerr_irq); setup_irq(CRIME_CPUERR_IRQ, &cpuerr_irq); diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c index 4125a5ba119e..fc75bfcb0c0e 100644 --- a/arch/mips/sgi-ip32/ip32-setup.c +++ b/arch/mips/sgi-ip32/ip32-setup.c @@ -83,7 +83,7 @@ void __init plat_time_init(void) void __init plat_timer_setup(struct irqaction *irq) { irq->handler = no_action; - setup_irq(IP32_R4K_TIMER_IRQ, irq); + setup_irq(MIPS_CPU_IRQ_BASE + 7, irq); } void __init plat_mem_setup(void) diff --git a/include/asm-mips/ip32/ip32_ints.h b/include/asm-mips/ip32/ip32_ints.h index c3c280e3d591..042f821899a8 100644 --- a/include/asm-mips/ip32/ip32_ints.h +++ b/include/asm-mips/ip32/ip32_ints.h @@ -9,86 +9,104 @@ #ifndef __ASM_IP32_INTS_H #define __ASM_IP32_INTS_H +#include + /* * This list reflects the assignment of interrupt numbers to * interrupting events. Order is fairly irrelevant to handling * priority. This differs from irix. */ -/* CPU */ -#define IP32_R4K_TIMER_IRQ 0 +enum ip32_irq_no { + /* + * CPU interrupts are 0 ... 7 + */ -/* MACE */ -#define MACE_VID_IN1_IRQ 1 -#define MACE_VID_IN2_IRQ 2 -#define MACE_VID_OUT_IRQ 3 -#define MACE_ETHERNET_IRQ 4 -/* SUPERIO, MISC, and AUDIO are MACEISA */ -#define MACE_PCI_BRIDGE_IRQ 8 + /* + * MACE + */ + MACE_VID_IN1_IRQ = MIPS_CPU_IRQ_BASE + 8, + MACE_VID_IN2_IRQ, + MACE_VID_OUT_IRQ, + MACE_ETHERNET_IRQ, + /* SUPERIO, MISC, and AUDIO are MACEISA */ + __MACE_SUPERIO, + __MACE_MISC, + __MACE_AUDIO, + MACE_PCI_BRIDGE_IRQ, -/* MACEPCI */ -#define MACEPCI_SCSI0_IRQ 9 -#define MACEPCI_SCSI1_IRQ 10 -#define MACEPCI_SLOT0_IRQ 11 -#define MACEPCI_SLOT1_IRQ 12 -#define MACEPCI_SLOT2_IRQ 13 -#define MACEPCI_SHARED0_IRQ 14 -#define MACEPCI_SHARED1_IRQ 15 -#define MACEPCI_SHARED2_IRQ 16 + /* + * MACEPCI + */ + MACEPCI_SCSI0_IRQ, + MACEPCI_SCSI1_IRQ, + MACEPCI_SLOT0_IRQ, + MACEPCI_SLOT1_IRQ, + MACEPCI_SLOT2_IRQ, + MACEPCI_SHARED0_IRQ, + MACEPCI_SHARED1_IRQ, + MACEPCI_SHARED2_IRQ, -/* CRIME */ -#define CRIME_GBE0_IRQ 17 -#define CRIME_GBE1_IRQ 18 -#define CRIME_GBE2_IRQ 19 -#define CRIME_GBE3_IRQ 20 -#define CRIME_CPUERR_IRQ 21 -#define CRIME_MEMERR_IRQ 22 -#define CRIME_RE_EMPTY_E_IRQ 23 -#define CRIME_RE_FULL_E_IRQ 24 -#define CRIME_RE_IDLE_E_IRQ 25 -#define CRIME_RE_EMPTY_L_IRQ 26 -#define CRIME_RE_FULL_L_IRQ 27 -#define CRIME_RE_IDLE_L_IRQ 28 -#define CRIME_SOFT0_IRQ 29 -#define CRIME_SOFT1_IRQ 30 -#define CRIME_SOFT2_IRQ 31 -#define CRIME_SYSCORERR_IRQ CRIME_SOFT2_IRQ -#define CRIME_VICE_IRQ 32 + /* + * CRIME + */ + CRIME_GBE0_IRQ, + CRIME_GBE1_IRQ, + CRIME_GBE2_IRQ, + CRIME_GBE3_IRQ, + CRIME_CPUERR_IRQ, + CRIME_MEMERR_IRQ, + CRIME_RE_EMPTY_E_IRQ, + CRIME_RE_FULL_E_IRQ, + CRIME_RE_IDLE_E_IRQ, + CRIME_RE_EMPTY_L_IRQ, + CRIME_RE_FULL_L_IRQ, + CRIME_RE_IDLE_L_IRQ, + CRIME_SOFT0_IRQ, + CRIME_SOFT1_IRQ, + CRIME_SOFT2_IRQ, + CRIME_SYSCORERR_IRQ = CRIME_SOFT2_IRQ, + CRIME_VICE_IRQ, -/* MACEISA */ -#define MACEISA_AUDIO_SW_IRQ 33 -#define MACEISA_AUDIO_SC_IRQ 34 -#define MACEISA_AUDIO1_DMAT_IRQ 35 -#define MACEISA_AUDIO1_OF_IRQ 36 -#define MACEISA_AUDIO2_DMAT_IRQ 37 -#define MACEISA_AUDIO2_MERR_IRQ 38 -#define MACEISA_AUDIO3_DMAT_IRQ 39 -#define MACEISA_AUDIO3_MERR_IRQ 40 -#define MACEISA_RTC_IRQ 41 -#define MACEISA_KEYB_IRQ 42 -/* MACEISA_KEYB_POLL is not an IRQ */ -#define MACEISA_MOUSE_IRQ 44 -/* MACEISA_MOUSE_POLL is not an IRQ */ -#define MACEISA_TIMER0_IRQ 46 -#define MACEISA_TIMER1_IRQ 47 -#define MACEISA_TIMER2_IRQ 48 -#define MACEISA_PARALLEL_IRQ 49 -#define MACEISA_PAR_CTXA_IRQ 50 -#define MACEISA_PAR_CTXB_IRQ 51 -#define MACEISA_PAR_MERR_IRQ 52 -#define MACEISA_SERIAL1_IRQ 53 -#define MACEISA_SERIAL1_TDMAT_IRQ 54 -#define MACEISA_SERIAL1_TDMAPR_IRQ 55 -#define MACEISA_SERIAL1_TDMAME_IRQ 56 -#define MACEISA_SERIAL1_RDMAT_IRQ 57 -#define MACEISA_SERIAL1_RDMAOR_IRQ 58 -#define MACEISA_SERIAL2_IRQ 59 -#define MACEISA_SERIAL2_TDMAT_IRQ 60 -#define MACEISA_SERIAL2_TDMAPR_IRQ 61 -#define MACEISA_SERIAL2_TDMAME_IRQ 62 -#define MACEISA_SERIAL2_RDMAT_IRQ 63 -#define MACEISA_SERIAL2_RDMAOR_IRQ 64 + /* + * MACEISA + */ + MACEISA_AUDIO_SW_IRQ, + MACEISA_AUDIO_SC_IRQ, + MACEISA_AUDIO1_DMAT_IRQ, + MACEISA_AUDIO1_OF_IRQ, + MACEISA_AUDIO2_DMAT_IRQ, + MACEISA_AUDIO2_MERR_IRQ, + MACEISA_AUDIO3_DMAT_IRQ, + MACEISA_AUDIO3_MERR_IRQ, + MACEISA_RTC_IRQ, + MACEISA_KEYB_IRQ, + /* MACEISA_KEYB_POLL is not an IRQ */ + __MACEISA_KEYB_POLL, + MACEISA_MOUSE_IRQ, + /* MACEISA_MOUSE_POLL is not an IRQ */ + __MACEISA_MOUSE_POLL, + MACEISA_TIMER0_IRQ, + MACEISA_TIMER1_IRQ, + MACEISA_TIMER2_IRQ, + MACEISA_PARALLEL_IRQ, + MACEISA_PAR_CTXA_IRQ, + MACEISA_PAR_CTXB_IRQ, + MACEISA_PAR_MERR_IRQ, + MACEISA_SERIAL1_IRQ, + MACEISA_SERIAL1_TDMAT_IRQ, + MACEISA_SERIAL1_TDMAPR_IRQ, + MACEISA_SERIAL1_TDMAME_IRQ, + MACEISA_SERIAL1_RDMAT_IRQ, + MACEISA_SERIAL1_RDMAOR_IRQ, + MACEISA_SERIAL2_IRQ, + MACEISA_SERIAL2_TDMAT_IRQ, + MACEISA_SERIAL2_TDMAPR_IRQ, + MACEISA_SERIAL2_TDMAME_IRQ, + MACEISA_SERIAL2_RDMAT_IRQ, + MACEISA_SERIAL2_RDMAOR_IRQ, -#define IP32_IRQ_MAX MACEISA_SERIAL2_RDMAOR_IRQ + IP32_IRQ_MAX = MACEISA_SERIAL2_RDMAOR_IRQ +}; #endif /* __ASM_IP32_INTS_H */ -- cgit v1.2.3-59-g8ed1b