From 2dbe13dbc15f8e452595e9d19beb70e08a7839f5 Mon Sep 17 00:00:00 2001 From: Vignesh Raghavendra Date: Wed, 26 May 2021 15:14:24 +0530 Subject: ARM: dts: omap2/3: Drop dmas property from I2C node DMA was never supported by i2c-omap driver and the bindings were never documented. Therefore drop the entries in preparation to moving bindings to YAML schema. Signed-off-by: Vignesh Raghavendra Reviewed-by: Grygorii Strashko Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dm816x.dtsi | 4 ---- arch/arm/boot/dts/omap2.dtsi | 4 ---- arch/arm/boot/dts/omap3.dtsi | 6 ------ 3 files changed, 14 deletions(-) diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index 1825d912b8ab..a9e7274806f4 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -314,8 +314,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <70>; - dmas = <&edma 58 0 &edma 59 0>; - dma-names = "tx", "rx"; }; i2c2: i2c@4802a000 { @@ -325,8 +323,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <71>; - dmas = <&edma 60 0 &edma 61 0>; - dma-names = "tx", "rx"; }; intc: interrupt-controller@48200000 { diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index f9c2a9938898..5750ca1233cc 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -120,8 +120,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <56>; - dmas = <&sdma 27 &sdma 28>; - dma-names = "tx", "rx"; }; i2c2: i2c@48072000 { @@ -131,8 +129,6 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <57>; - dmas = <&sdma 29 &sdma 30>; - dma-names = "tx", "rx"; }; mcspi1: spi@48098000 { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 574bda7a4afd..64b7e6fddd1b 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -403,8 +403,6 @@ compatible = "ti,omap3-i2c"; reg = <0x48070000 0x80>; interrupts = <56>; - dmas = <&sdma 27 &sdma 28>; - dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; @@ -414,8 +412,6 @@ compatible = "ti,omap3-i2c"; reg = <0x48072000 0x80>; interrupts = <57>; - dmas = <&sdma 29 &sdma 30>; - dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; @@ -425,8 +421,6 @@ compatible = "ti,omap3-i2c"; reg = <0x48060000 0x80>; interrupts = <61>; - dmas = <&sdma 25 &sdma 26>; - dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; -- cgit v1.3-14-g43fede From 07168bacf81953e0f35bd6c0dc64022fe86b8ad3 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Tue, 1 Jun 2021 11:10:29 +0530 Subject: ARM: dts: ti: drop usage of redundant compatible Commit 229110c1aa691 ("ARM: dts: am437x/am33xx/da850: Add new ECAP and EPWM bindings") added ti,am3352-ehrpwm compatible which is similar to ti,am33xx-ehrpwm but without out t,hwmod properties. But with commit 58bfbea5b1c68 ("ARM: dts: am437x/am33xx: Remove hwmod entries for ECAP and EPWM nodes") dropped support for all ti,hwmod for ehrpwm, but missed deprecating ti,am33xx-ehrpwm compatible. So drop ti,am33xx-ehrpwm from DT as it is no longer needed. ti-ehrpwn driver still support ti,am33xx-ehrpwm in order to maintain backward compatibility. Signed-off-by: Lokesh Vutla Reviewed-by: Grygorii Strashko Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx-l4.dtsi | 9 +++------ arch/arm/boot/dts/am437x-l4.dtsi | 18 ++++++------------ arch/arm/boot/dts/da850.dtsi | 6 ++---- 3 files changed, 11 insertions(+), 22 deletions(-) diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 268793bd88cb..cd716f7c59ee 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -2017,8 +2017,7 @@ }; ehrpwm0: pwm@200 { - compatible = "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; + compatible = "ti,am3352-ehrpwm"; #pwm-cells = <3>; reg = <0x200 0x80>; clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>; @@ -2078,8 +2077,7 @@ }; ehrpwm1: pwm@200 { - compatible = "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; + compatible = "ti,am3352-ehrpwm"; #pwm-cells = <3>; reg = <0x200 0x80>; clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>; @@ -2139,8 +2137,7 @@ }; ehrpwm2: pwm@200 { - compatible = "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; + compatible = "ti,am3352-ehrpwm"; #pwm-cells = <3>; reg = <0x200 0x80>; clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>; diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi index 204d3d42b09f..8c132cc0d29c 100644 --- a/arch/arm/boot/dts/am437x-l4.dtsi +++ b/arch/arm/boot/dts/am437x-l4.dtsi @@ -1760,8 +1760,7 @@ ehrpwm0: pwm@200 { compatible = "ti,am4372-ehrpwm", - "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; + "ti,am3352-ehrpwm"; #pwm-cells = <3>; reg = <0x200 0x80>; clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>; @@ -1812,8 +1811,7 @@ ehrpwm1: pwm@200 { compatible = "ti,am4372-ehrpwm", - "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; + "ti,am3352-ehrpwm"; #pwm-cells = <3>; reg = <0x200 0x80>; clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>; @@ -1864,8 +1862,7 @@ ehrpwm2: pwm@200 { compatible = "ti,am4372-ehrpwm", - "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; + "ti,am3352-ehrpwm"; #pwm-cells = <3>; reg = <0x200 0x80>; clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>; @@ -1905,8 +1902,7 @@ ehrpwm3: pwm@200 { compatible = "ti,am4372-ehrpwm", - "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; + "ti,am3352-ehrpwm"; #pwm-cells = <3>; reg = <0x200 0x80>; clocks = <&ehrpwm3_tbclk>, <&l4ls_gclk>; @@ -1946,8 +1942,7 @@ ehrpwm4: pwm@48308200 { compatible = "ti,am4372-ehrpwm", - "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; + "ti,am3352-ehrpwm"; #pwm-cells = <3>; reg = <0x200 0x80>; clocks = <&ehrpwm4_tbclk>, <&l4ls_gclk>; @@ -1987,8 +1982,7 @@ ehrpwm5: pwm@200 { compatible = "ti,am4372-ehrpwm", - "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; + "ti,am3352-ehrpwm"; #pwm-cells = <3>; reg = <0x200 0x80>; clocks = <&ehrpwm5_tbclk>, <&l4ls_gclk>; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 7cf31b6e48b7..afdf3d3747ce 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -574,8 +574,7 @@ status = "disabled"; }; ehrpwm0: pwm@300000 { - compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; + compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm"; #pwm-cells = <3>; reg = <0x300000 0x2000>; clocks = <&psc1 17>, <&ehrpwm_tbclk>; @@ -584,8 +583,7 @@ status = "disabled"; }; ehrpwm1: pwm@302000 { - compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; + compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm"; #pwm-cells = <3>; reg = <0x302000 0x2000>; clocks = <&psc1 17>, <&ehrpwm_tbclk>; -- cgit v1.3-14-g43fede From be8c9d7957dda67379f68863f0e9f82600e0f583 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Tue, 1 Jun 2021 14:54:55 +0530 Subject: ARM: dts: ti: Drop usage of ti,am33xx-ecap from DT nodes ti,am33xx-ecap is used to represent device nodes using ti,hwmod data. Now that hwmod entries are entirely removed, drop usage of ti,am33xx-ecap compatible from all DT nodes. Signed-off-by: Lokesh Vutla Reviewed-by: Grygorii Strashko Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx-l4.dtsi | 9 +++------ arch/arm/boot/dts/am437x-l4.dtsi | 9 +++------ arch/arm/boot/dts/da850.dtsi | 9 +++------ 3 files changed, 9 insertions(+), 18 deletions(-) diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index cd716f7c59ee..1e1bd7451194 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -1996,8 +1996,7 @@ ranges = <0 0 0x1000>; ecap0: ecap@100 { - compatible = "ti,am3352-ecap", - "ti,am33xx-ecap"; + compatible = "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x100 0x80>; clocks = <&l4ls_gclk>; @@ -2056,8 +2055,7 @@ ranges = <0 0 0x1000>; ecap1: ecap@100 { - compatible = "ti,am3352-ecap", - "ti,am33xx-ecap"; + compatible = "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x100 0x80>; clocks = <&l4ls_gclk>; @@ -2116,8 +2114,7 @@ ranges = <0 0 0x1000>; ecap2: ecap@100 { - compatible = "ti,am3352-ecap", - "ti,am33xx-ecap"; + compatible = "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x100 0x80>; clocks = <&l4ls_gclk>; diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi index 8c132cc0d29c..201e4e3bd3a2 100644 --- a/arch/arm/boot/dts/am437x-l4.dtsi +++ b/arch/arm/boot/dts/am437x-l4.dtsi @@ -1749,8 +1749,7 @@ ecap0: ecap@100 { compatible = "ti,am4372-ecap", - "ti,am3352-ecap", - "ti,am33xx-ecap"; + "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x100 0x80>; clocks = <&l4ls_gclk>; @@ -1800,8 +1799,7 @@ ecap1: ecap@100 { compatible = "ti,am4372-ecap", - "ti,am3352-ecap", - "ti,am33xx-ecap"; + "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x100 0x80>; clocks = <&l4ls_gclk>; @@ -1851,8 +1849,7 @@ ecap2: ecap@100 { compatible = "ti,am4372-ecap", - "ti,am3352-ecap", - "ti,am33xx-ecap"; + "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x100 0x80>; clocks = <&l4ls_gclk>; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index afdf3d3747ce..8e5748e6b270 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -592,8 +592,7 @@ status = "disabled"; }; ecap0: ecap@306000 { - compatible = "ti,da850-ecap", "ti,am3352-ecap", - "ti,am33xx-ecap"; + compatible = "ti,da850-ecap", "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x306000 0x80>; clocks = <&psc1 20>; @@ -602,8 +601,7 @@ status = "disabled"; }; ecap1: ecap@307000 { - compatible = "ti,da850-ecap", "ti,am3352-ecap", - "ti,am33xx-ecap"; + compatible = "ti,da850-ecap", "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x307000 0x80>; clocks = <&psc1 20>; @@ -612,8 +610,7 @@ status = "disabled"; }; ecap2: ecap@308000 { - compatible = "ti,da850-ecap", "ti,am3352-ecap", - "ti,am33xx-ecap"; + compatible = "ti,da850-ecap", "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x308000 0x80>; clocks = <&psc1 20>; -- cgit v1.3-14-g43fede From 61edd91c262b4cdc92d95769509434ec24a8fe2a Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Tue, 1 Jun 2021 14:54:56 +0530 Subject: ARM: dts: ti: Fix node name for all ecap dt nodes dtbs_check produces the following warning for ecap node name: ecap@100: $nodename:0: 'ecap@100' does not match '^pwm(@.*|-[0-9a-f])*$' Fix this by replacing ecap with pwm in node name Signed-off-by: Lokesh Vutla Reviewed-by: Grygorii Strashko Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-cm-t335.dts | 2 +- arch/arm/boot/dts/am335x-evm.dts | 2 +- arch/arm/boot/dts/am335x-evmsk.dts | 2 +- arch/arm/boot/dts/am33xx-l4.dtsi | 6 +++--- arch/arm/boot/dts/am437x-l4.dtsi | 6 +++--- arch/arm/boot/dts/da850.dtsi | 6 +++--- arch/arm/boot/dts/dra7-l4.dtsi | 6 +++--- 7 files changed, 15 insertions(+), 15 deletions(-) diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts index 36d963db4026..a306b0ccd06f 100644 --- a/arch/arm/boot/dts/am335x-cm-t335.dts +++ b/arch/arm/boot/dts/am335x-cm-t335.dts @@ -333,7 +333,7 @@ status = "okay"; &epwmss0 { status = "okay"; - ecap0: ecap@100 { + ecap0: pwm@100 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&ecap0_pins>; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 902e295b309e..9cf39c93defb 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -495,7 +495,7 @@ &epwmss0 { status = "okay"; - ecap0: ecap@100 { + ecap0: pwm@100 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&ecap0_pins>; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 45bf0273ecd8..001657be0381 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -510,7 +510,7 @@ &epwmss2 { status = "okay"; - ecap2: ecap@100 { + ecap2: pwm@100 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&ecap2_pins>; diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 1e1bd7451194..d86f5c3cb533 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -1995,7 +1995,7 @@ status = "disabled"; ranges = <0 0 0x1000>; - ecap0: ecap@100 { + ecap0: pwm@100 { compatible = "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x100 0x80>; @@ -2054,7 +2054,7 @@ status = "disabled"; ranges = <0 0 0x1000>; - ecap1: ecap@100 { + ecap1: pwm@100 { compatible = "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x100 0x80>; @@ -2113,7 +2113,7 @@ status = "disabled"; ranges = <0 0 0x1000>; - ecap2: ecap@100 { + ecap2: pwm@100 { compatible = "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x100 0x80>; diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi index 201e4e3bd3a2..40ef3973f2a9 100644 --- a/arch/arm/boot/dts/am437x-l4.dtsi +++ b/arch/arm/boot/dts/am437x-l4.dtsi @@ -1747,7 +1747,7 @@ ranges = <0 0 0x1000>; status = "disabled"; - ecap0: ecap@100 { + ecap0: pwm@100 { compatible = "ti,am4372-ecap", "ti,am3352-ecap"; #pwm-cells = <3>; @@ -1797,7 +1797,7 @@ ranges = <0 0 0x1000>; status = "disabled"; - ecap1: ecap@100 { + ecap1: pwm@100 { compatible = "ti,am4372-ecap", "ti,am3352-ecap"; #pwm-cells = <3>; @@ -1847,7 +1847,7 @@ ranges = <0 0 0x1000>; status = "disabled"; - ecap2: ecap@100 { + ecap2: pwm@100 { compatible = "ti,am4372-ecap", "ti,am3352-ecap"; #pwm-cells = <3>; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 8e5748e6b270..c3942b4e82ad 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -591,7 +591,7 @@ power-domains = <&psc1 17>; status = "disabled"; }; - ecap0: ecap@306000 { + ecap0: pwm@306000 { compatible = "ti,da850-ecap", "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x306000 0x80>; @@ -600,7 +600,7 @@ power-domains = <&psc1 20>; status = "disabled"; }; - ecap1: ecap@307000 { + ecap1: pwm@307000 { compatible = "ti,da850-ecap", "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x307000 0x80>; @@ -609,7 +609,7 @@ power-domains = <&psc1 20>; status = "disabled"; }; - ecap2: ecap@308000 { + ecap2: pwm@308000 { compatible = "ti,da850-ecap", "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x308000 0x80>; diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index 4b336b831da2..be63dfebabd6 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -2561,7 +2561,7 @@ status = "disabled"; ranges = <0 0 0x1000>; - ecap0: ecap@100 { + ecap0: pwm@100 { compatible = "ti,dra746-ecap", "ti,am3352-ecap"; #pwm-cells = <3>; @@ -2607,7 +2607,7 @@ status = "disabled"; ranges = <0 0 0x1000>; - ecap1: ecap@100 { + ecap1: pwm@100 { compatible = "ti,dra746-ecap", "ti,am3352-ecap"; #pwm-cells = <3>; @@ -2653,7 +2653,7 @@ status = "disabled"; ranges = <0 0 0x1000>; - ecap2: ecap@100 { + ecap2: pwm@100 { compatible = "ti,dra746-ecap", "ti,am3352-ecap"; #pwm-cells = <3>; -- cgit v1.3-14-g43fede From 6320b2aee8b46b7a6468a02a38d1815b263ebc38 Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Tue, 1 Jun 2021 14:54:57 +0530 Subject: ARM: dts: am33xx: Drop interrupt property from ecap nodes Interrupts were never supported by ecap driver and the bindings were never documented.Therefore drop the entries in preparation to moving bindings to YAML schema. Signed-off-by: Lokesh Vutla Reviewed-by: Grygorii Strashko Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx-l4.dtsi | 6 ------ 1 file changed, 6 deletions(-) diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index d86f5c3cb533..859e760df4c8 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -2001,8 +2001,6 @@ reg = <0x100 0x80>; clocks = <&l4ls_gclk>; clock-names = "fck"; - interrupts = <31>; - interrupt-names = "ecap0"; status = "disabled"; }; @@ -2060,8 +2058,6 @@ reg = <0x100 0x80>; clocks = <&l4ls_gclk>; clock-names = "fck"; - interrupts = <47>; - interrupt-names = "ecap1"; status = "disabled"; }; @@ -2119,8 +2115,6 @@ reg = <0x100 0x80>; clocks = <&l4ls_gclk>; clock-names = "fck"; - interrupts = <61>; - interrupt-names = "ecap2"; status = "disabled"; }; -- cgit v1.3-14-g43fede From 794fd4a55ec55b9443c143388a8addee92671157 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 1 Jun 2021 17:25:45 +0200 Subject: ARM: dts: dra7x-evm: Drop "ti,pcf8575" The TI part is equivalent to the NXP part and its compatible value is not documented in the DT bindings. All other users of similar I2C GPIO expanders just use the compatible values of the original NXP parts. Signed-off-by: Geert Uytterhoeven Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-evm.dts | 6 +++--- arch/arm/boot/dts/dra72-evm-common.dtsi | 4 ++-- arch/arm/boot/dts/dra76-evm.dts | 6 +++--- 3 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 3dcb6e1f49bc..87deb6a76eff 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -319,7 +319,7 @@ }; pcf_lcd: gpio@20 { - compatible = "ti,pcf8575", "nxp,pcf8575"; + compatible = "nxp,pcf8575"; reg = <0x20>; gpio-controller; #gpio-cells = <2>; @@ -330,7 +330,7 @@ }; pcf_gpio_21: gpio@21 { - compatible = "ti,pcf8575", "nxp,pcf8575"; + compatible = "nxp,pcf8575"; reg = <0x21>; lines-initial-states = <0x1408>; gpio-controller; @@ -362,7 +362,7 @@ clock-frequency = <400000>; pcf_hdmi: gpio@26 { - compatible = "ti,pcf8575", "nxp,pcf8575"; + compatible = "nxp,pcf8575"; reg = <0x26>; gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index f2384277d5dc..f12825268188 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -226,7 +226,7 @@ }; pcf_gpio_21: gpio@21 { - compatible = "ti,pcf8575", "nxp,pcf8575"; + compatible = "nxp,pcf8575"; reg = <0x21>; lines-initial-states = <0x1408>; gpio-controller; @@ -256,7 +256,7 @@ clock-frequency = <400000>; pcf_hdmi: pcf8575@26 { - compatible = "ti,pcf8575", "nxp,pcf8575"; + compatible = "nxp,pcf8575"; reg = <0x26>; gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index fbe4030650b7..e2b7fcb061cf 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -349,7 +349,7 @@ }; pcf_lcd: pcf8757@20 { - compatible = "ti,pcf8575", "nxp,pcf8575"; + compatible = "nxp,pcf8575"; reg = <0x20>; gpio-controller; #gpio-cells = <2>; @@ -360,7 +360,7 @@ }; pcf_gpio_21: pcf8757@21 { - compatible = "ti,pcf8575", "nxp,pcf8575"; + compatible = "nxp,pcf8575"; reg = <0x21>; gpio-controller; #gpio-cells = <2>; @@ -371,7 +371,7 @@ }; pcf_hdmi: pcf8575@26 { - compatible = "ti,pcf8575", "nxp,pcf8575"; + compatible = "nxp,pcf8575"; reg = <0x26>; gpio-controller; #gpio-cells = <2>; -- cgit v1.3-14-g43fede From 414bfe1d26b60ef20b58e36efd5363188a694bab Mon Sep 17 00:00:00 2001 From: Aswath Govindraju Date: Tue, 8 Jun 2021 10:39:51 +0530 Subject: ARM: dts: am335x: align ti,pindir-d0-out-d1-in property with dt-shema ti,pindir-d0-out-d1-in property is expected to be of type boolean. Therefore, fix the property accordingly. Fixes: 444d66fafab8 ("ARM: dts: add spi wifi support to cm-t335") Signed-off-by: Aswath Govindraju Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-cm-t335.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts index a306b0ccd06f..688e14e82eba 100644 --- a/arch/arm/boot/dts/am335x-cm-t335.dts +++ b/arch/arm/boot/dts/am335x-cm-t335.dts @@ -496,7 +496,7 @@ status = "okay"; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; - ti,pindir-d0-out-d1-in = <1>; + ti,pindir-d0-out-d1-in; /* WLS1271 WiFi */ wlcore: wlcore@1 { compatible = "ti,wl1271"; -- cgit v1.3-14-g43fede From 9b11fec7345f21995f4ea4bafb0e108b9a620238 Mon Sep 17 00:00:00 2001 From: Aswath Govindraju Date: Tue, 8 Jun 2021 10:39:52 +0530 Subject: ARM: dts: am437x: align ti,pindir-d0-out-d1-in property with dt-shema ti,pindir-d0-out-d1-in property is expected to be of type boolean. Therefore, fix the property accordingly. Fixes: b0b039515445 ("ARM: dts: am43x-epos-evm: set data pin directions for spi0 and spi1") Signed-off-by: Aswath Govindraju Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am43x-epos-evm.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index d717d5ada812..aae0af10a5b1 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -860,7 +860,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi0_pins_default>; pinctrl-1 = <&spi0_pins_sleep>; - ti,pindir-d0-out-d1-in = <1>; + ti,pindir-d0-out-d1-in; }; &spi1 { @@ -868,7 +868,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi1_pins_default>; pinctrl-1 = <&spi1_pins_sleep>; - ti,pindir-d0-out-d1-in = <1>; + ti,pindir-d0-out-d1-in; }; &usb2_phy1 { -- cgit v1.3-14-g43fede