From 37b82b5de77083ada0202da9001ecec9affe4b10 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Wed, 4 Apr 2012 16:39:58 -0400 Subject: arch/tile: introduce GXIO IORPC framework for tilegx The GXIO I/O RPC subsystem handles exporting I/O hardware resources to Linux and to applications running under Linux. For instance, memory which is made available for I/O DMA must be mapped by an I/O TLB; that means that such memory must be locked down by Linux, so that it is not swapped or otherwise reused, as long as those I/O TLB entries are active. Similarly, configuring direct hardware access introduces new validation requirements. If a user application registers memory, Linux must ensure that the supplied virtual addresses are valid, and turn them into client physical addresses. Similarly, when Linux then supplies those client physical addresses to the Tilera hypervisor, it must in turn validate those before turning them into the real physical addresses which are required by the hardware. To the extent that these sorts of activities were required on previous TILE architecture processors, they were implemented in a device-specific fashion. This meant that every I/O device had its own Tilera hypervisor driver, its own Linux driver, and in some cases its own user-level library support. There was a large amount of more-or-less functionally identical code in different places, particularly in the different Linux drivers. For TILE-Gx, this support has been generalized into a common framework, known as the I/O RPC framework or just IORPC. The two "gxio" directories (one for headers, one for sources) start with just a few files in each with this infrastructure commit, but after adding support for the on-board I/O shims for networking, PCI, USB, crypto, compression, I2CS, etc., there end up being about 20 files in each directory. More information on the IORPC framework is in the header, included in this commit. Signed-off-by: Chris Metcalf --- arch/tile/Kconfig | 2 + arch/tile/Makefile | 2 + arch/tile/gxio/Kconfig | 5 + arch/tile/gxio/Makefile | 5 + arch/tile/gxio/iorpc_globals.c | 89 ++++ arch/tile/gxio/kiorpc.c | 61 +++ arch/tile/include/gxio/common.h | 40 ++ arch/tile/include/gxio/iorpc_globals.h | 38 ++ arch/tile/include/gxio/kiorpc.h | 29 ++ arch/tile/include/hv/iorpc.h | 714 +++++++++++++++++++++++++++++++++ 10 files changed, 985 insertions(+) create mode 100644 arch/tile/gxio/Kconfig create mode 100644 arch/tile/gxio/Makefile create mode 100644 arch/tile/gxio/iorpc_globals.c create mode 100644 arch/tile/gxio/kiorpc.c create mode 100644 arch/tile/include/gxio/common.h create mode 100644 arch/tile/include/gxio/iorpc_globals.h create mode 100644 arch/tile/include/gxio/kiorpc.h create mode 100644 arch/tile/include/hv/iorpc.h diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index fe128816c448..645979cfb718 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -345,6 +345,8 @@ config KERNEL_PL kernel will be built to run at. Generally you should use the default value here. +source "arch/tile/gxio/Kconfig" + endmenu # Tilera-specific configuration menu "Bus options" diff --git a/arch/tile/Makefile b/arch/tile/Makefile index e20b0a0b64a1..55640cf92597 100644 --- a/arch/tile/Makefile +++ b/arch/tile/Makefile @@ -59,6 +59,8 @@ libs-y += $(LIBGCC_PATH) # See arch/tile/Kbuild for content of core part of the kernel core-y += arch/tile/ +core-$(CONFIG_TILE_GXIO) += arch/tile/gxio/ + ifdef TILERA_ROOT INSTALL_PATH ?= $(TILERA_ROOT)/tile/boot endif diff --git a/arch/tile/gxio/Kconfig b/arch/tile/gxio/Kconfig new file mode 100644 index 000000000000..8eff47fe1236 --- /dev/null +++ b/arch/tile/gxio/Kconfig @@ -0,0 +1,5 @@ +# Support direct access to TILE-Gx hardware from user space, via the +# gxio library, or from kernel space, via kernel IORPC support. +config TILE_GXIO + bool + depends on TILEGX diff --git a/arch/tile/gxio/Makefile b/arch/tile/gxio/Makefile new file mode 100644 index 000000000000..db1ee2863d8e --- /dev/null +++ b/arch/tile/gxio/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Tile-Gx device access support. +# + +obj-$(CONFIG_TILE_GXIO) += iorpc_globals.o kiorpc.o diff --git a/arch/tile/gxio/iorpc_globals.c b/arch/tile/gxio/iorpc_globals.c new file mode 100644 index 000000000000..e178e90805a2 --- /dev/null +++ b/arch/tile/gxio/iorpc_globals.c @@ -0,0 +1,89 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* This file is machine-generated; DO NOT EDIT! */ +#include "gxio/iorpc_globals.h" + +struct arm_pollfd_param { + union iorpc_pollfd pollfd; +}; + +int __iorpc_arm_pollfd(int fd, int pollfd_cookie) +{ + struct arm_pollfd_param temp; + struct arm_pollfd_param *params = &temp; + + params->pollfd.kernel.cookie = pollfd_cookie; + + return hv_dev_pwrite(fd, 0, (HV_VirtAddr) params, sizeof(*params), + IORPC_OP_ARM_POLLFD); +} + +EXPORT_SYMBOL(__iorpc_arm_pollfd); + +struct close_pollfd_param { + union iorpc_pollfd pollfd; +}; + +int __iorpc_close_pollfd(int fd, int pollfd_cookie) +{ + struct close_pollfd_param temp; + struct close_pollfd_param *params = &temp; + + params->pollfd.kernel.cookie = pollfd_cookie; + + return hv_dev_pwrite(fd, 0, (HV_VirtAddr) params, sizeof(*params), + IORPC_OP_CLOSE_POLLFD); +} + +EXPORT_SYMBOL(__iorpc_close_pollfd); + +struct get_mmio_base_param { + HV_PTE base; +}; + +int __iorpc_get_mmio_base(int fd, HV_PTE *base) +{ + int __result; + struct get_mmio_base_param temp; + struct get_mmio_base_param *params = &temp; + + __result = + hv_dev_pread(fd, 0, (HV_VirtAddr) params, sizeof(*params), + IORPC_OP_GET_MMIO_BASE); + *base = params->base; + + return __result; +} + +EXPORT_SYMBOL(__iorpc_get_mmio_base); + +struct check_mmio_offset_param { + unsigned long offset; + unsigned long size; +}; + +int __iorpc_check_mmio_offset(int fd, unsigned long offset, unsigned long size) +{ + struct check_mmio_offset_param temp; + struct check_mmio_offset_param *params = &temp; + + params->offset = offset; + params->size = size; + + return hv_dev_pwrite(fd, 0, (HV_VirtAddr) params, sizeof(*params), + IORPC_OP_CHECK_MMIO_OFFSET); +} + +EXPORT_SYMBOL(__iorpc_check_mmio_offset); diff --git a/arch/tile/gxio/kiorpc.c b/arch/tile/gxio/kiorpc.c new file mode 100644 index 000000000000..c8096aa5a3fc --- /dev/null +++ b/arch/tile/gxio/kiorpc.c @@ -0,0 +1,61 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * TILE-Gx IORPC support for kernel I/O drivers. + */ + +#include +#include +#include +#include +#include + +#ifdef DEBUG_IORPC +#define TRACE(FMT, ...) pr_info(SIMPLE_MSG_LINE FMT, ## __VA_ARGS__) +#else +#define TRACE(...) +#endif + +/* Create kernel-VA-space MMIO mapping for an on-chip IO device. */ +void __iomem *iorpc_ioremap(int hv_fd, resource_size_t offset, + unsigned long size) +{ + pgprot_t mmio_base, prot = { 0 }; + unsigned long pfn; + int err; + + /* Look up the shim's lotar and base PA. */ + err = __iorpc_get_mmio_base(hv_fd, &mmio_base); + if (err) { + TRACE("get_mmio_base() failure: %d\n", err); + return NULL; + } + + /* Make sure the HV driver approves of our offset and size. */ + err = __iorpc_check_mmio_offset(hv_fd, offset, size); + if (err) { + TRACE("check_mmio_offset() failure: %d\n", err); + return NULL; + } + + /* + * mmio_base contains a base pfn and homing coordinates. Turn + * it into an MMIO pgprot and offset pfn. + */ + prot = hv_pte_set_lotar(prot, hv_pte_get_lotar(mmio_base)); + pfn = pte_pfn(mmio_base) + PFN_DOWN(offset); + + return ioremap_prot(PFN_PHYS(pfn), size, prot); +} + +EXPORT_SYMBOL(iorpc_ioremap); diff --git a/arch/tile/include/gxio/common.h b/arch/tile/include/gxio/common.h new file mode 100644 index 000000000000..724595a24d04 --- /dev/null +++ b/arch/tile/include/gxio/common.h @@ -0,0 +1,40 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#ifndef _GXIO_COMMON_H_ +#define _GXIO_COMMON_H_ + +/* + * Routines shared between the various GXIO device components. + */ + +#include + +#include +#include +#include + +/* Define the standard gxio MMIO functions using kernel functions. */ +#define __gxio_mmio_read8(addr) readb(addr) +#define __gxio_mmio_read16(addr) readw(addr) +#define __gxio_mmio_read32(addr) readl(addr) +#define __gxio_mmio_read64(addr) readq(addr) +#define __gxio_mmio_write8(addr, val) writeb((val), (addr)) +#define __gxio_mmio_write16(addr, val) writew((val), (addr)) +#define __gxio_mmio_write32(addr, val) writel((val), (addr)) +#define __gxio_mmio_write64(addr, val) writeq((val), (addr)) +#define __gxio_mmio_read(addr) __gxio_mmio_read64(addr) +#define __gxio_mmio_write(addr, val) __gxio_mmio_write64((addr), (val)) + +#endif /* !_GXIO_COMMON_H_ */ diff --git a/arch/tile/include/gxio/iorpc_globals.h b/arch/tile/include/gxio/iorpc_globals.h new file mode 100644 index 000000000000..52c721f8dad9 --- /dev/null +++ b/arch/tile/include/gxio/iorpc_globals.h @@ -0,0 +1,38 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* This file is machine-generated; DO NOT EDIT! */ +#ifndef __IORPC_LINUX_RPC_H__ +#define __IORPC_LINUX_RPC_H__ + +#include + +#include +#include +#include + +#define IORPC_OP_ARM_POLLFD IORPC_OPCODE(IORPC_FORMAT_KERNEL_POLLFD, 0x9000) +#define IORPC_OP_CLOSE_POLLFD IORPC_OPCODE(IORPC_FORMAT_KERNEL_POLLFD, 0x9001) +#define IORPC_OP_GET_MMIO_BASE IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8000) +#define IORPC_OP_CHECK_MMIO_OFFSET IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8001) + +int __iorpc_arm_pollfd(int fd, int pollfd_cookie); + +int __iorpc_close_pollfd(int fd, int pollfd_cookie); + +int __iorpc_get_mmio_base(int fd, HV_PTE *base); + +int __iorpc_check_mmio_offset(int fd, unsigned long offset, unsigned long size); + +#endif /* !__IORPC_LINUX_RPC_H__ */ diff --git a/arch/tile/include/gxio/kiorpc.h b/arch/tile/include/gxio/kiorpc.h new file mode 100644 index 000000000000..ee5820979ff3 --- /dev/null +++ b/arch/tile/include/gxio/kiorpc.h @@ -0,0 +1,29 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * Support routines for kernel IORPC drivers. + */ + +#ifndef _GXIO_KIORPC_H +#define _GXIO_KIORPC_H + +#include +#include +#include + +#if CHIP_HAS_MMIO() +void __iomem *iorpc_ioremap(int hv_fd, resource_size_t offset, + unsigned long size); +#endif + +#endif /* _GXIO_KIORPC_H */ diff --git a/arch/tile/include/hv/iorpc.h b/arch/tile/include/hv/iorpc.h new file mode 100644 index 000000000000..89c72a5d9341 --- /dev/null +++ b/arch/tile/include/hv/iorpc.h @@ -0,0 +1,714 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ +#ifndef _HV_IORPC_H_ +#define _HV_IORPC_H_ + +/** + * + * Error codes and struct definitions for the IO RPC library. + * + * The hypervisor's IO RPC component provides a convenient way for + * driver authors to proxy system calls between user space, linux, and + * the hypervisor driver. The core of the system is a set of Python + * files that take ".idl" files as input and generates the following + * source code: + * + * - _rpc_call() routines for use in userspace IO libraries. These + * routines take an argument list specified in the .idl file, pack the + * arguments in to a buffer, and read or write that buffer via the + * Linux iorpc driver. + * + * - dispatch_read() and dispatch_write() routines that hypervisor + * drivers can use to implement most of their dev_pread() and + * dev_pwrite() methods. These routines decode the incoming parameter + * blob, permission check and translate parameters where appropriate, + * and then invoke a callback routine for whichever RPC call has + * arrived. The driver simply implements the set of callback + * routines. + * + * The IO RPC system also includes the Linux 'iorpc' driver, which + * proxies calls between the userspace library and the hypervisor + * driver. The Linux driver is almost entirely device agnostic; it + * watches for special flags indicating cases where a memory buffer + * address might need to be translated, etc. As a result, driver + * writers can avoid many of the problem cases related to registering + * hardware resources like memory pages or interrupts. However, the + * drivers must be careful to obey the conventions documented below in + * order to work properly with the generic Linux iorpc driver. + * + * @section iorpc_domains Service Domains + * + * All iorpc-based drivers must support a notion of service domains. + * A service domain is basically an application context - state + * indicating resources that are allocated to that particular app + * which it may access and (perhaps) other applications may not + * access. Drivers can support any number of service domains they + * choose. In some cases the design is limited by a number of service + * domains supported by the IO hardware; in other cases the service + * domains are a purely software concept and the driver chooses a + * maximum number of domains based on how much state memory it is + * willing to preallocate. + * + * For example, the mPIPE driver only supports as many service domains + * as are supported by the mPIPE hardware. This limitation is + * required because the hardware implements its own MMIO protection + * scheme to allow large MMIO mappings while still protecting small + * register ranges within the page that should only be accessed by the + * hypervisor. + * + * In contrast, drivers with no hardware service domain limitations + * (for instance the TRIO shim) can implement an arbitrary number of + * service domains. In these cases, each service domain is limited to + * a carefully restricted set of legal MMIO addresses if necessary to + * keep one application from corrupting another application's state. + * + * @section iorpc_conventions System Call Conventions + * + * The driver's open routine is responsible for allocating a new + * service domain for each hv_dev_open() call. By convention, the + * return value from open() should be the service domain number on + * success, or GXIO_ERR_NO_SVC_DOM if no more service domains are + * available. + * + * The implementations of hv_dev_pread() and hv_dev_pwrite() are + * responsible for validating the devhdl value passed up by the + * client. Since the device handle returned by hv_dev_open() should + * embed the positive service domain number, drivers should make sure + * that DRV_HDL2BITS(devhdl) is a legal service domain. If the client + * passes an illegal service domain number, the routine should return + * GXIO_ERR_INVAL_SVC_DOM. Once the service domain number has been + * validated, the driver can copy to/from the client buffer and call + * the dispatch_read() or dispatch_write() methods created by the RPC + * generator. + * + * The hv_dev_close() implementation should reset all service domain + * state and put the service domain back on a free list for + * reallocation by a future application. In most cases, this will + * require executing a hardware reset or drain flow and denying any + * MMIO regions that were created for the service domain. + * + * @section iorpc_data Special Data Types + * + * The .idl file syntax allows the creation of syscalls with special + * parameters that require permission checks or translations as part + * of the system call path. Because of limitations in the code + * generator, APIs are generally limited to just one of these special + * parameters per system call, and they are sometimes required to be + * the first or last parameter to the call. Special parameters + * include: + * + * @subsection iorpc_mem_buffer MEM_BUFFER + * + * The MEM_BUFFER() datatype allows user space to "register" memory + * buffers with a device. Registering memory accomplishes two tasks: + * Linux keeps track of all buffers that might be modified by a + * hardware device, and the hardware device drivers bind registered + * buffers to particular hardware resources like ingress NotifRings. + * The MEM_BUFFER() idl syntax can take extra flags like ALIGN_64KB, + * ALIGN_SELF_SIZE, and FLAGS indicating that memory buffers must have + * certain alignment or that the user should be able to pass a "memory + * flags" word specifying attributes like nt_hint or IO cache pinning. + * The parser will accept multiple MEM_BUFFER() flags. + * + * Implementations must obey the following conventions when + * registering memory buffers via the iorpc flow. These rules are a + * result of the Linux driver implementation, which needs to keep + * track of how many times a particular page has been registered with + * the hardware so that it can release the page when all those + * registrations are cleared. + * + * - Memory registrations that refer to a resource which has already + * been bound must return GXIO_ERR_ALREADY_INIT. Thus, it is an + * error to register memory twice without resetting (i.e. closing) the + * resource in between. This convention keeps the Linux driver from + * having to track which particular devices a page is bound to. + * + * - At present, a memory registration is only cleared when the + * service domain is reset. In this case, the Linux driver simply + * closes the HV device file handle and then decrements the reference + * counts of all pages that were previously registered with the + * device. + * + * - In the future, we may add a mechanism for unregistering memory. + * One possible implementation would require that the user specify + * which buffer is currently registered. The HV would then verify + * that that page was actually the one currently mapped and return + * success or failure to Linux, which would then only decrement the + * page reference count if the addresses were mapped. Another scheme + * might allow Linux to pass a token to the HV to be returned when the + * resource is unmapped. + * + * @subsection iorpc_interrupt INTERRUPT + * + * The INTERRUPT .idl datatype allows the client to bind hardware + * interrupts to a particular combination of IPI parameters - CPU, IPI + * PL, and event bit number. This data is passed via a special + * datatype so that the Linux driver can validate the CPU and PL and + * the HV generic iorpc code can translate client CPUs to real CPUs. + * + * @subsection iorpc_pollfd_setup POLLFD_SETUP + * + * The POLLFD_SETUP .idl datatype allows the client to set up hardware + * interrupt bindings which are received by Linux but which are made + * visible to user processes as state transitions on a file descriptor; + * this allows user processes to use Linux primitives, such as poll(), to + * await particular hardware events. This data is passed via a special + * datatype so that the Linux driver may recognize the pollable file + * descriptor and translate it to a set of interrupt target information, + * and so that the HV generic iorpc code can translate client CPUs to real + * CPUs. + * + * @subsection iorpc_pollfd POLLFD + * + * The POLLFD .idl datatype allows manipulation of hardware interrupt + * bindings set up via the POLLFD_SETUP datatype; common operations are + * resetting the state of the requested interrupt events, and unbinding any + * bound interrupts. This data is passed via a special datatype so that + * the Linux driver may recognize the pollable file descriptor and + * translate it to an interrupt identifier previously supplied by the + * hypervisor as the result of an earlier pollfd_setup operation. + * + * @subsection iorpc_blob BLOB + * + * The BLOB .idl datatype allows the client to write an arbitrary + * length string of bytes up to the hypervisor driver. This can be + * useful for passing up large, arbitrarily structured data like + * classifier programs. The iorpc stack takes care of validating the + * buffer VA and CPA as the data passes up to the hypervisor. Unlike + * MEM_BUFFER(), the buffer is not registered - Linux does not bump + * page refcounts and the HV driver should not reuse the buffer once + * the system call is complete. + * + * @section iorpc_translation Translating User Space Calls + * + * The ::iorpc_offset structure describes the formatting of the offset + * that is passed to pread() or pwrite() as part of the generated RPC code. + * When the user calls up to Linux, the rpc code fills in all the fields of + * the offset, including a 16-bit opcode, a 16 bit format indicator, and 32 + * bits of user-specified "sub-offset". The opcode indicates which syscall + * is being requested. The format indicates whether there is a "prefix + * struct" at the start of the memory buffer passed to pwrite(), and if so + * what data is in that prefix struct. These prefix structs are used to + * implement special datatypes like MEM_BUFFER() and INTERRUPT - we arrange + * to put data that needs translation and permission checks at the start of + * the buffer so that the Linux driver and generic portions of the HV iorpc + * code can easily access the data. The 32 bits of user-specified + * "sub-offset" are most useful for pread() calls where the user needs to + * also pass in a few bits indicating which register to read, etc. + * + * The Linux iorpc driver watches for system calls that contain prefix + * structs so that it can translate parameters and bump reference + * counts as appropriate. It does not (currently) have any knowledge + * of the per-device opcodes - it doesn't care what operation you're + * doing to mPIPE, so long as it can do all the generic book-keeping. + * The hv/iorpc.h header file defines all of the generic encoding bits + * needed to translate iorpc calls without knowing which particular + * opcode is being issued. + * + * @section iorpc_globals Global iorpc Calls + * + * Implementing mmap() required adding some special iorpc syscalls + * that are only called by the Linux driver, never by userspace. + * These include get_mmio_base() and check_mmio_offset(). These + * routines are described in globals.idl and must be included in every + * iorpc driver. By providing these routines in every driver, Linux's + * mmap implementation can easily get the PTE bits it needs and + * validate the PA offset without needing to know the per-device + * opcodes to perform those tasks. + * + * @section iorpc_kernel Supporting gxio APIs in the Kernel + * + * The iorpc code generator also supports generation of kernel code + * implementing the gxio APIs. This capability is currently used by + * the mPIPE network driver, and will likely be used by the TRIO root + * complex and endpoint drivers and perhaps an in-kernel crypto + * driver. Each driver that wants to instantiate iorpc calls in the + * kernel needs to generate a kernel version of the generate rpc code + * and (probably) copy any related gxio source files into the kernel. + * The mPIPE driver provides a good example of this pattern. + */ + +#ifdef __KERNEL__ +#include +#else +#include +#endif + +#if defined(__HV__) +#include +#elif defined(__KERNEL__) +#include "hypervisor.h" +#include +#else +#include +#endif + + +/** Code indicating translation services required within the RPC path. + * These indicate whether there is a translatable struct at the start + * of the RPC buffer and what information that struct contains. + */ +enum iorpc_format_e +{ + /** No translation required, no prefix struct. */ + IORPC_FORMAT_NONE, + + /** No translation required, no prefix struct, no access to this + * operation from user space. */ + IORPC_FORMAT_NONE_NOUSER, + + /** Prefix struct contains user VA and size. */ + IORPC_FORMAT_USER_MEM, + + /** Prefix struct contains CPA, size, and homing bits. */ + IORPC_FORMAT_KERNEL_MEM, + + /** Prefix struct contains interrupt. */ + IORPC_FORMAT_KERNEL_INTERRUPT, + + /** Prefix struct contains user-level interrupt. */ + IORPC_FORMAT_USER_INTERRUPT, + + /** Prefix struct contains pollfd_setup (interrupt information). */ + IORPC_FORMAT_KERNEL_POLLFD_SETUP, + + /** Prefix struct contains user-level pollfd_setup (file descriptor). */ + IORPC_FORMAT_USER_POLLFD_SETUP, + + /** Prefix struct contains pollfd (interrupt cookie). */ + IORPC_FORMAT_KERNEL_POLLFD, + + /** Prefix struct contains user-level pollfd (file descriptor). */ + IORPC_FORMAT_USER_POLLFD, +}; + + +/** Generate an opcode given format and code. */ +#define IORPC_OPCODE(FORMAT, CODE) (((FORMAT) << 16) | (CODE)) + +/** The offset passed through the read() and write() system calls + combines an opcode with 32 bits of user-specified offset. */ +union iorpc_offset +{ +#ifndef __BIG_ENDIAN__ + uint64_t offset; /**< All bits. */ + + struct + { + uint16_t code; /**< RPC code. */ + uint16_t format; /**< iorpc_format_e */ + uint32_t sub_offset; /**< caller-specified offset. */ + }; + + uint32_t opcode; /**< Opcode combines code & format. */ +#else + uint64_t offset; /**< All bits. */ + + struct + { + uint32_t sub_offset; /**< caller-specified offset. */ + uint16_t format; /**< iorpc_format_e */ + uint16_t code; /**< RPC code. */ + }; + + struct + { + uint32_t padding; + uint32_t opcode; /**< Opcode combines code & format. */ + }; +#endif +}; + + +/** Homing and cache hinting bits that can be used by IO devices. */ +struct iorpc_mem_attr +{ + unsigned int lotar_x:4; /**< lotar X bits (or Gx page_mask). */ + unsigned int lotar_y:4; /**< lotar Y bits (or Gx page_offset). */ + unsigned int hfh:1; /**< Uses hash-for-home. */ + unsigned int nt_hint:1; /**< Non-temporal hint. */ + unsigned int io_pin:1; /**< Only fill 'IO' cache ways. */ +}; + +/** Set the nt_hint bit. */ +#define IORPC_MEM_BUFFER_FLAG_NT_HINT (1 << 0) + +/** Set the IO pin bit. */ +#define IORPC_MEM_BUFFER_FLAG_IO_PIN (1 << 1) + + +/** A structure used to describe memory registration. Different + protection levels describe memory differently, so this union + contains all the different possible descriptions. As a request + moves up the call chain, each layer translates from one + description format to the next. In particular, the Linux iorpc + driver translates user VAs into CPAs and homing parameters. */ +union iorpc_mem_buffer +{ + struct + { + uint64_t va; /**< User virtual address. */ + uint64_t size; /**< Buffer size. */ + unsigned int flags; /**< nt_hint, IO pin. */ + } + user; /**< Buffer as described by user apps. */ + + struct + { + unsigned long long cpa; /**< Client physical address. */ +#if defined(__KERNEL__) || defined(__HV__) + size_t size; /**< Buffer size. */ + HV_PTE pte; /**< PTE describing memory homing. */ +#else + uint64_t size; + uint64_t pte; +#endif + unsigned int flags; /**< nt_hint, IO pin. */ + } + kernel; /**< Buffer as described by kernel. */ + + struct + { + unsigned long long pa; /**< Physical address. */ + size_t size; /**< Buffer size. */ + struct iorpc_mem_attr attr; /**< Homing and locality hint bits. */ + } + hv; /**< Buffer parameters for HV driver. */ +}; + + +/** A structure used to describe interrupts. The format differs slightly + * for user and kernel interrupts. As with the mem_buffer_t, translation + * between the formats is done at each level. */ +union iorpc_interrupt +{ + struct + { + int cpu; /**< CPU. */ + int event; /**< evt_num */ + } + user; /**< Interrupt as described by user applications. */ + + struct + { + int x; /**< X coord. */ + int y; /**< Y coord. */ + int ipi; /**< int_num */ + int event; /**< evt_num */ + } + kernel; /**< Interrupt as described by the kernel. */ + +}; + + +/** A structure used to describe interrupts used with poll(). The format + * differs significantly for requests from user to kernel, and kernel to + * hypervisor. As with the mem_buffer_t, translation between the formats + * is done at each level. */ +union iorpc_pollfd_setup +{ + struct + { + int fd; /**< Pollable file descriptor. */ + } + user; /**< pollfd_setup as described by user applications. */ + + struct + { + int x; /**< X coord. */ + int y; /**< Y coord. */ + int ipi; /**< int_num */ + int event; /**< evt_num */ + } + kernel; /**< pollfd_setup as described by the kernel. */ + +}; + + +/** A structure used to describe previously set up interrupts used with + * poll(). The format differs significantly for requests from user to + * kernel, and kernel to hypervisor. As with the mem_buffer_t, translation + * between the formats is done at each level. */ +union iorpc_pollfd +{ + struct + { + int fd; /**< Pollable file descriptor. */ + } + user; /**< pollfd as described by user applications. */ + + struct + { + int cookie; /**< hv cookie returned by the pollfd_setup operation. */ + } + kernel; /**< pollfd as described by the kernel. */ + +}; + + +/** The various iorpc devices use error codes from -1100 to -1299. + * + * This range is distinct from netio (-700 to -799), the hypervisor + * (-800 to -899), tilepci (-900 to -999), ilib (-1000 to -1099), + * gxcr (-1300 to -1399) and gxpci (-1400 to -1499). + */ +enum gxio_err_e { + + /** Largest iorpc error number. */ + GXIO_ERR_MAX = -1101, + + + /********************************************************/ + /* Generic Error Codes */ + /********************************************************/ + + /** Bad RPC opcode - possible version incompatibility. */ + GXIO_ERR_OPCODE = -1101, + + /** Invalid parameter. */ + GXIO_ERR_INVAL = -1102, + + /** Memory buffer did not meet alignment requirements. */ + GXIO_ERR_ALIGNMENT = -1103, + + /** Memory buffers must be coherent and cacheable. */ + GXIO_ERR_COHERENCE = -1104, + + /** Resource already initialized. */ + GXIO_ERR_ALREADY_INIT = -1105, + + /** No service domains available. */ + GXIO_ERR_NO_SVC_DOM = -1106, + + /** Illegal service domain number. */ + GXIO_ERR_INVAL_SVC_DOM = -1107, + + /** Illegal MMIO address. */ + GXIO_ERR_MMIO_ADDRESS = -1108, + + /** Illegal interrupt binding. */ + GXIO_ERR_INTERRUPT = -1109, + + /** Unreasonable client memory. */ + GXIO_ERR_CLIENT_MEMORY = -1110, + + /** No more IOTLB entries. */ + GXIO_ERR_IOTLB_ENTRY = -1111, + + /** Invalid memory size. */ + GXIO_ERR_INVAL_MEMORY_SIZE = -1112, + + /** Unsupported operation. */ + GXIO_ERR_UNSUPPORTED_OP = -1113, + + /** Insufficient DMA credits. */ + GXIO_ERR_DMA_CREDITS = -1114, + + /** Operation timed out. */ + GXIO_ERR_TIMEOUT = -1115, + + /** No such device or object. */ + GXIO_ERR_NO_DEVICE = -1116, + + /** Device or resource busy. */ + GXIO_ERR_BUSY = -1117, + + /** I/O error. */ + GXIO_ERR_IO = -1118, + + /** Permissions error. */ + GXIO_ERR_PERM = -1119, + + + + /********************************************************/ + /* Test Device Error Codes */ + /********************************************************/ + + /** Illegal register number. */ + GXIO_TEST_ERR_REG_NUMBER = -1120, + + /** Illegal buffer slot. */ + GXIO_TEST_ERR_BUFFER_SLOT = -1121, + + + /********************************************************/ + /* MPIPE Error Codes */ + /********************************************************/ + + + /** Invalid buffer size. */ + GXIO_MPIPE_ERR_INVAL_BUFFER_SIZE = -1131, + + /** Cannot allocate buffer stack. */ + GXIO_MPIPE_ERR_NO_BUFFER_STACK = -1140, + + /** Invalid buffer stack number. */ + GXIO_MPIPE_ERR_BAD_BUFFER_STACK = -1141, + + /** Cannot allocate NotifRing. */ + GXIO_MPIPE_ERR_NO_NOTIF_RING = -1142, + + /** Invalid NotifRing number. */ + GXIO_MPIPE_ERR_BAD_NOTIF_RING = -1143, + + /** Cannot allocate NotifGroup. */ + GXIO_MPIPE_ERR_NO_NOTIF_GROUP = -1144, + + /** Invalid NotifGroup number. */ + GXIO_MPIPE_ERR_BAD_NOTIF_GROUP = -1145, + + /** Cannot allocate bucket. */ + GXIO_MPIPE_ERR_NO_BUCKET = -1146, + + /** Invalid bucket number. */ + GXIO_MPIPE_ERR_BAD_BUCKET = -1147, + + /** Cannot allocate eDMA ring. */ + GXIO_MPIPE_ERR_NO_EDMA_RING = -1148, + + /** Invalid eDMA ring number. */ + GXIO_MPIPE_ERR_BAD_EDMA_RING = -1149, + + /** Invalid channel number. */ + GXIO_MPIPE_ERR_BAD_CHANNEL = -1150, + + /** Bad configuration. */ + GXIO_MPIPE_ERR_BAD_CONFIG = -1151, + + /** Empty iqueue. */ + GXIO_MPIPE_ERR_IQUEUE_EMPTY = -1152, + + /** Empty rules. */ + GXIO_MPIPE_ERR_RULES_EMPTY = -1160, + + /** Full rules. */ + GXIO_MPIPE_ERR_RULES_FULL = -1161, + + /** Corrupt rules. */ + GXIO_MPIPE_ERR_RULES_CORRUPT = -1162, + + /** Invalid rules. */ + GXIO_MPIPE_ERR_RULES_INVALID = -1163, + + /** Classifier is too big. */ + GXIO_MPIPE_ERR_CLASSIFIER_TOO_BIG = -1170, + + /** Classifier is too complex. */ + GXIO_MPIPE_ERR_CLASSIFIER_TOO_COMPLEX = -1171, + + /** Classifier has bad header. */ + GXIO_MPIPE_ERR_CLASSIFIER_BAD_HEADER = -1172, + + /** Classifier has bad contents. */ + GXIO_MPIPE_ERR_CLASSIFIER_BAD_CONTENTS = -1173, + + /** Classifier encountered invalid symbol. */ + GXIO_MPIPE_ERR_CLASSIFIER_INVAL_SYMBOL = -1174, + + /** Classifier encountered invalid bounds. */ + GXIO_MPIPE_ERR_CLASSIFIER_INVAL_BOUNDS = -1175, + + /** Classifier encountered invalid relocation. */ + GXIO_MPIPE_ERR_CLASSIFIER_INVAL_RELOCATION = -1176, + + /** Classifier encountered undefined symbol. */ + GXIO_MPIPE_ERR_CLASSIFIER_UNDEF_SYMBOL = -1177, + + + /********************************************************/ + /* TRIO Error Codes */ + /********************************************************/ + + /** Cannot allocate memory map region. */ + GXIO_TRIO_ERR_NO_MEMORY_MAP = -1180, + + /** Invalid memory map region number. */ + GXIO_TRIO_ERR_BAD_MEMORY_MAP = -1181, + + /** Cannot allocate scatter queue. */ + GXIO_TRIO_ERR_NO_SCATTER_QUEUE = -1182, + + /** Invalid scatter queue number. */ + GXIO_TRIO_ERR_BAD_SCATTER_QUEUE = -1183, + + /** Cannot allocate push DMA ring. */ + GXIO_TRIO_ERR_NO_PUSH_DMA_RING = -1184, + + /** Invalid push DMA ring index. */ + GXIO_TRIO_ERR_BAD_PUSH_DMA_RING = -1185, + + /** Cannot allocate pull DMA ring. */ + GXIO_TRIO_ERR_NO_PULL_DMA_RING = -1186, + + /** Invalid pull DMA ring index. */ + GXIO_TRIO_ERR_BAD_PULL_DMA_RING = -1187, + + /** Cannot allocate PIO region. */ + GXIO_TRIO_ERR_NO_PIO = -1188, + + /** Invalid PIO region index. */ + GXIO_TRIO_ERR_BAD_PIO = -1189, + + /** Cannot allocate ASID. */ + GXIO_TRIO_ERR_NO_ASID = -1190, + + /** Invalid ASID. */ + GXIO_TRIO_ERR_BAD_ASID = -1191, + + + /********************************************************/ + /* MICA Error Codes */ + /********************************************************/ + + /** No such accelerator type. */ + GXIO_MICA_ERR_BAD_ACCEL_TYPE = -1220, + + /** Cannot allocate context. */ + GXIO_MICA_ERR_NO_CONTEXT = -1221, + + /** PKA command queue is full, can't add another command. */ + GXIO_MICA_ERR_PKA_CMD_QUEUE_FULL = -1222, + + /** PKA result queue is empty, can't get a result from the queue. */ + GXIO_MICA_ERR_PKA_RESULT_QUEUE_EMPTY = -1223, + + /********************************************************/ + /* GPIO Error Codes */ + /********************************************************/ + + /** Pin not available. Either the physical pin does not exist, or + * it is reserved by the hypervisor for system usage. */ + GXIO_GPIO_ERR_PIN_UNAVAILABLE = -1240, + + /** Pin busy. The pin exists, and is available for use via GXIO, but + * it has been attached by some other process or driver. */ + GXIO_GPIO_ERR_PIN_BUSY = -1241, + + /** Cannot access unattached pin. One or more of the pins being + * manipulated by this call are not attached to the requesting + * context. */ + GXIO_GPIO_ERR_PIN_UNATTACHED = -1242, + + /** Invalid I/O mode for pin. The wiring of the pin in the system + * is such that the I/O mode or electrical control parameters + * requested could cause damage. */ + GXIO_GPIO_ERR_PIN_INVALID_MODE = -1243, + + /** Smallest iorpc error number. */ + GXIO_ERR_MIN = -1299 +}; + + +#endif /* !_HV_IORPC_H_ */ -- cgit v1.2.3-59-g8ed1b From 44e56967100f22a21abade38821018ba03d0a39f Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Fri, 6 Apr 2012 13:52:07 -0400 Subject: arch/tile: support MMIO-based readb/writeb etc. Add support for MMIO read/write on tilegx to support GXIO IORPC access. Similar to the asm-generic version, but we include memory fences on the writes to be conservative. Signed-off-by: Chris Metcalf --- arch/tile/include/asm/io.h | 144 ++++++++++++++++++++++++++++++++++++--------- 1 file changed, 116 insertions(+), 28 deletions(-) diff --git a/arch/tile/include/asm/io.h b/arch/tile/include/asm/io.h index d2152deb1f3c..2a9b293fece6 100644 --- a/arch/tile/include/asm/io.h +++ b/arch/tile/include/asm/io.h @@ -62,6 +62,92 @@ extern void iounmap(volatile void __iomem *addr); #define mm_ptov(addr) ((void *)phys_to_virt(addr)) #define mm_vtop(addr) ((unsigned long)virt_to_phys(addr)) +#if CHIP_HAS_MMIO() + +/* + * We use inline assembly to guarantee that the compiler does not + * split an access into multiple byte-sized accesses as it might + * sometimes do if a register data structure is marked "packed". + * Obviously on tile we can't tolerate such an access being + * actually unaligned, but we want to avoid the case where the + * compiler conservatively would generate multiple accesses even + * for an aligned read or write. + */ + +static inline u8 __raw_readb(const volatile void __iomem *addr) +{ + return *(const volatile u8 __force *)addr; +} + +static inline u16 __raw_readw(const volatile void __iomem *addr) +{ + u16 ret; + asm volatile("ld2u %0, %1" : "=r" (ret) : "r" (addr)); + barrier(); + return le16_to_cpu(ret); +} + +static inline u32 __raw_readl(const volatile void __iomem *addr) +{ + u32 ret; + /* Sign-extend to conform to u32 ABI sign-extension convention. */ + asm volatile("ld4s %0, %1" : "=r" (ret) : "r" (addr)); + barrier(); + return le32_to_cpu(ret); +} + +static inline u64 __raw_readq(const volatile void __iomem *addr) +{ + u64 ret; + asm volatile("ld %0, %1" : "=r" (ret) : "r" (addr)); + barrier(); + return le64_to_cpu(ret); +} + +static inline void __raw_writeb(u8 val, volatile void __iomem *addr) +{ + *(volatile u8 __force *)addr = val; +} + +static inline void __raw_writew(u16 val, volatile void __iomem *addr) +{ + asm volatile("st2 %0, %1" :: "r" (addr), "r" (cpu_to_le16(val))); +} + +static inline void __raw_writel(u32 val, volatile void __iomem *addr) +{ + asm volatile("st4 %0, %1" :: "r" (addr), "r" (cpu_to_le32(val))); +} + +static inline void __raw_writeq(u64 val, volatile void __iomem *addr) +{ + asm volatile("st %0, %1" :: "r" (addr), "r" (cpu_to_le64(val))); +} + +/* + * The on-chip I/O hardware on tilegx is configured with VA=PA for the + * kernel's PA range. The low-level APIs and field names use "va" and + * "void *" nomenclature, to be consistent with the general notion + * that the addresses in question are virtualizable, but in the kernel + * context we are actually manipulating PA values. (In other contexts, + * e.g. access from user space, we do in fact use real virtual addresses + * in the va fields.) To allow readers of the code to understand what's + * happening, we direct their attention to this comment by using the + * following two functions that just duplicate __va() and __pa(). + */ +typedef unsigned long tile_io_addr_t; +static inline tile_io_addr_t va_to_tile_io_addr(void *va) +{ + BUILD_BUG_ON(sizeof(phys_addr_t) != sizeof(tile_io_addr_t)); + return __pa(va); +} +static inline void *tile_io_addr_to_va(tile_io_addr_t tile_io_addr) +{ + return __va(tile_io_addr); +} + +#else /* CHIP_HAS_MMIO() */ + #ifdef CONFIG_PCI extern u8 _tile_readb(unsigned long addr); @@ -73,10 +159,19 @@ extern void _tile_writew(u16 val, unsigned long addr); extern void _tile_writel(u32 val, unsigned long addr); extern void _tile_writeq(u64 val, unsigned long addr); -#else +#define __raw_readb(addr) _tile_readb((unsigned long)addr) +#define __raw_readw(addr) _tile_readw((unsigned long)addr) +#define __raw_readl(addr) _tile_readl((unsigned long)addr) +#define __raw_readq(addr) _tile_readq((unsigned long)addr) +#define __raw_writeb(val, addr) _tile_writeb(val, (unsigned long)addr) +#define __raw_writew(val, addr) _tile_writew(val, (unsigned long)addr) +#define __raw_writel(val, addr) _tile_writel(val, (unsigned long)addr) +#define __raw_writeq(val, addr) _tile_writeq(val, (unsigned long)addr) + +#else /* CONFIG_PCI */ /* - * The Tile architecture does not support IOMEM unless PCI is enabled. + * The tilepro architecture does not support IOMEM unless PCI is enabled. * Unfortunately we can't yet simply not declare these methods, * since some generic code that compiles into the kernel, but * we never run, uses them unconditionally. @@ -88,65 +183,58 @@ static inline int iomem_panic(void) return 0; } -static inline u8 _tile_readb(unsigned long addr) +static inline u8 readb(unsigned long addr) { return iomem_panic(); } -static inline u16 _tile_readw(unsigned long addr) +static inline u16 _readw(unsigned long addr) { return iomem_panic(); } -static inline u32 _tile_readl(unsigned long addr) +static inline u32 readl(unsigned long addr) { return iomem_panic(); } -static inline u64 _tile_readq(unsigned long addr) +static inline u64 readq(unsigned long addr) { return iomem_panic(); } -static inline void _tile_writeb(u8 val, unsigned long addr) +static inline void writeb(u8 val, unsigned long addr) { iomem_panic(); } -static inline void _tile_writew(u16 val, unsigned long addr) +static inline void writew(u16 val, unsigned long addr) { iomem_panic(); } -static inline void _tile_writel(u32 val, unsigned long addr) +static inline void writel(u32 val, unsigned long addr) { iomem_panic(); } -static inline void _tile_writeq(u64 val, unsigned long addr) +static inline void writeq(u64 val, unsigned long addr) { iomem_panic(); } -#endif +#endif /* CONFIG_PCI */ + +#endif /* CHIP_HAS_MMIO() */ -#define readb(addr) _tile_readb((unsigned long)addr) -#define readw(addr) _tile_readw((unsigned long)addr) -#define readl(addr) _tile_readl((unsigned long)addr) -#define readq(addr) _tile_readq((unsigned long)addr) -#define writeb(val, addr) _tile_writeb(val, (unsigned long)addr) -#define writew(val, addr) _tile_writew(val, (unsigned long)addr) -#define writel(val, addr) _tile_writel(val, (unsigned long)addr) -#define writeq(val, addr) _tile_writeq(val, (unsigned long)addr) - -#define __raw_readb readb -#define __raw_readw readw -#define __raw_readl readl -#define __raw_readq readq -#define __raw_writeb writeb -#define __raw_writew writew -#define __raw_writel writel -#define __raw_writeq writeq +#define readb __raw_readb +#define readw __raw_readw +#define readl __raw_readl +#define readq __raw_readq +#define writeb __raw_writeb +#define writew __raw_writew +#define writel __raw_writel +#define writeq __raw_writeq #define readb_relaxed readb #define readw_relaxed readw -- cgit v1.2.3-59-g8ed1b From 6369798037c0e915fc3e3844083f2aeecb924c9d Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Wed, 4 Apr 2012 16:58:27 -0400 Subject: arch/tile: common DMA code for the GXIO IORPC subsystem The dma_queue support is used by both the mPipe (networking) and Trio (PCI) hardware shims on tilegx. This common code is selected when either of those drivers is built. Signed-off-by: Chris Metcalf --- arch/tile/gxio/Kconfig | 6 ++ arch/tile/gxio/Makefile | 1 + arch/tile/gxio/dma_queue.c | 176 +++++++++++++++++++++++++++++++++++++ arch/tile/include/gxio/dma_queue.h | 161 +++++++++++++++++++++++++++++++++ 4 files changed, 344 insertions(+) create mode 100644 arch/tile/gxio/dma_queue.c create mode 100644 arch/tile/include/gxio/dma_queue.h diff --git a/arch/tile/gxio/Kconfig b/arch/tile/gxio/Kconfig index 8eff47fe1236..ecd076c8cfd5 100644 --- a/arch/tile/gxio/Kconfig +++ b/arch/tile/gxio/Kconfig @@ -3,3 +3,9 @@ config TILE_GXIO bool depends on TILEGX + +# Support direct access to the common I/O DMA facility within the +# TILE-Gx mPIPE and Trio hardware from kernel space. +config TILE_GXIO_DMA + bool + select TILE_GXIO diff --git a/arch/tile/gxio/Makefile b/arch/tile/gxio/Makefile index db1ee2863d8e..97ab468fb8c5 100644 --- a/arch/tile/gxio/Makefile +++ b/arch/tile/gxio/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_TILE_GXIO) += iorpc_globals.o kiorpc.o +obj-$(CONFIG_TILE_GXIO_DMA) += dma_queue.o diff --git a/arch/tile/gxio/dma_queue.c b/arch/tile/gxio/dma_queue.c new file mode 100644 index 000000000000..baa60357f8ba --- /dev/null +++ b/arch/tile/gxio/dma_queue.c @@ -0,0 +1,176 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include +#include +#include +#include + +/* Wait for a memory read to complete. */ +#define wait_for_value(val) \ + __asm__ __volatile__("move %0, %0" :: "r"(val)) + +/* The index is in the low 16. */ +#define DMA_QUEUE_INDEX_MASK ((1 << 16) - 1) + +/* + * The hardware descriptor-ring type. + * This matches the types used by mpipe (MPIPE_EDMA_POST_REGION_VAL_t) + * and trio (TRIO_PUSH_DMA_REGION_VAL_t or TRIO_PULL_DMA_REGION_VAL_t). + * See those types for more documentation on the individual fields. + */ +typedef union { + struct { +#ifndef __BIG_ENDIAN__ + uint64_t ring_idx:16; + uint64_t count:16; + uint64_t gen:1; + uint64_t __reserved:31; +#else + uint64_t __reserved:31; + uint64_t gen:1; + uint64_t count:16; + uint64_t ring_idx:16; +#endif + }; + uint64_t word; +} __gxio_ring_t; + +void __gxio_dma_queue_init(__gxio_dma_queue_t *dma_queue, + void *post_region_addr, unsigned int num_entries) +{ + /* + * Limit 65536 entry rings to 65535 credits because we only have a + * 16 bit completion counter. + */ + int64_t credits = (num_entries < 65536) ? num_entries : 65535; + + memset(dma_queue, 0, sizeof(*dma_queue)); + + dma_queue->post_region_addr = post_region_addr; + dma_queue->hw_complete_count = 0; + dma_queue->credits_and_next_index = credits << DMA_QUEUE_CREDIT_SHIFT; +} + +EXPORT_SYMBOL_GPL(__gxio_dma_queue_init); + +void __gxio_dma_queue_update_credits(__gxio_dma_queue_t *dma_queue) +{ + __gxio_ring_t val; + uint64_t count; + uint64_t delta; + uint64_t new_count; + + /* + * Read the 64-bit completion count without touching the cache, so + * we later avoid having to evict any sharers of this cache line + * when we update it below. + */ + uint64_t orig_hw_complete_count = + cmpxchg(&dma_queue->hw_complete_count, + -1, -1); + + /* Make sure the load completes before we access the hardware. */ + wait_for_value(orig_hw_complete_count); + + /* Read the 16-bit count of how many packets it has completed. */ + val.word = __gxio_mmio_read(dma_queue->post_region_addr); + count = val.count; + + /* + * Calculate the number of completions since we last updated the + * 64-bit counter. It's safe to ignore the high bits because the + * maximum credit value is 65535. + */ + delta = (count - orig_hw_complete_count) & 0xffff; + if (delta == 0) + return; + + /* + * Try to write back the count, advanced by delta. If we race with + * another thread, this might fail, in which case we return + * immediately on the assumption that some credits are (or at least + * were) available. + */ + new_count = orig_hw_complete_count + delta; + if (cmpxchg(&dma_queue->hw_complete_count, + orig_hw_complete_count, + new_count) != orig_hw_complete_count) + return; + + /* + * We succeeded in advancing the completion count; add back the + * corresponding number of egress credits. + */ + __insn_fetchadd(&dma_queue->credits_and_next_index, + (delta << DMA_QUEUE_CREDIT_SHIFT)); +} + +EXPORT_SYMBOL_GPL(__gxio_dma_queue_update_credits); + +/* + * A separate 'blocked' method for put() so that backtraces and + * profiles will clearly indicate that we're wasting time spinning on + * egress availability rather than actually posting commands. + */ +int64_t __gxio_dma_queue_wait_for_credits(__gxio_dma_queue_t *dma_queue, + int64_t modifier) +{ + int backoff = 16; + int64_t old; + + do { + int i; + /* Back off to avoid spamming memory networks. */ + for (i = backoff; i > 0; i--) + __insn_mfspr(SPR_PASS); + + /* Check credits again. */ + __gxio_dma_queue_update_credits(dma_queue); + old = __insn_fetchaddgez(&dma_queue->credits_and_next_index, + modifier); + + /* Calculate bounded exponential backoff for next iteration. */ + if (backoff < 256) + backoff *= 2; + } while (old + modifier < 0); + + return old; +} + +EXPORT_SYMBOL_GPL(__gxio_dma_queue_wait_for_credits); + +int64_t __gxio_dma_queue_reserve_aux(__gxio_dma_queue_t *dma_queue, + unsigned int num, int wait) +{ + return __gxio_dma_queue_reserve(dma_queue, num, wait != 0, true); +} + +EXPORT_SYMBOL_GPL(__gxio_dma_queue_reserve_aux); + +int __gxio_dma_queue_is_complete(__gxio_dma_queue_t *dma_queue, + int64_t completion_slot, int update) +{ + if (update) { + if (ACCESS_ONCE(dma_queue->hw_complete_count) > + completion_slot) + return 1; + + __gxio_dma_queue_update_credits(dma_queue); + } + + return ACCESS_ONCE(dma_queue->hw_complete_count) > completion_slot; +} + +EXPORT_SYMBOL_GPL(__gxio_dma_queue_is_complete); diff --git a/arch/tile/include/gxio/dma_queue.h b/arch/tile/include/gxio/dma_queue.h new file mode 100644 index 000000000000..00654feb7db0 --- /dev/null +++ b/arch/tile/include/gxio/dma_queue.h @@ -0,0 +1,161 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#ifndef _GXIO_DMA_QUEUE_H_ +#define _GXIO_DMA_QUEUE_H_ + +/* + * DMA queue management APIs shared between TRIO and mPIPE. + */ + +#include "common.h" + +/* The credit counter lives in the high 32 bits. */ +#define DMA_QUEUE_CREDIT_SHIFT 32 + +/* + * State object that tracks a DMA queue's head and tail indices, as + * well as the number of commands posted and completed. The + * structure is accessed via a thread-safe, lock-free algorithm. + */ +typedef struct { + /* + * Address of a MPIPE_EDMA_POST_REGION_VAL_t, + * TRIO_PUSH_DMA_REGION_VAL_t, or TRIO_PULL_DMA_REGION_VAL_t + * register. These register have identical encodings and provide + * information about how many commands have been processed. + */ + void *post_region_addr; + + /* + * A lazily-updated count of how many edescs the hardware has + * completed. + */ + uint64_t hw_complete_count __attribute__ ((aligned(64))); + + /* + * High 32 bits are a count of available egress command credits, + * low 24 bits are the next egress "slot". + */ + int64_t credits_and_next_index; + +} __gxio_dma_queue_t; + +/* Initialize a dma queue. */ +extern void __gxio_dma_queue_init(__gxio_dma_queue_t *dma_queue, + void *post_region_addr, + unsigned int num_entries); + +/* + * Update the "credits_and_next_index" and "hw_complete_count" fields + * based on pending hardware completions. Note that some other thread + * may have already done this and, importantly, may still be in the + * process of updating "credits_and_next_index". + */ +extern void __gxio_dma_queue_update_credits(__gxio_dma_queue_t *dma_queue); + +/* Wait for credits to become available. */ +extern int64_t __gxio_dma_queue_wait_for_credits(__gxio_dma_queue_t *dma_queue, + int64_t modifier); + +/* Reserve slots in the queue, optionally waiting for slots to become + * available, and optionally returning a "completion_slot" suitable for + * direct comparison to "hw_complete_count". + */ +static inline int64_t __gxio_dma_queue_reserve(__gxio_dma_queue_t *dma_queue, + unsigned int num, bool wait, + bool completion) +{ + uint64_t slot; + + /* + * Try to reserve 'num' egress command slots. We do this by + * constructing a constant that subtracts N credits and adds N to + * the index, and using fetchaddgez to only apply it if the credits + * count doesn't go negative. + */ + int64_t modifier = (((int64_t)(-num)) << DMA_QUEUE_CREDIT_SHIFT) | num; + int64_t old = + __insn_fetchaddgez(&dma_queue->credits_and_next_index, + modifier); + + if (unlikely(old + modifier < 0)) { + /* + * We're out of credits. Try once to get more by checking for + * completed egress commands. If that fails, wait or fail. + */ + __gxio_dma_queue_update_credits(dma_queue); + old = __insn_fetchaddgez(&dma_queue->credits_and_next_index, + modifier); + if (old + modifier < 0) { + if (wait) + old = __gxio_dma_queue_wait_for_credits + (dma_queue, modifier); + else + return GXIO_ERR_DMA_CREDITS; + } + } + + /* The bottom 24 bits of old encode the "slot". */ + slot = (old & 0xffffff); + + if (completion) { + /* + * A "completion_slot" is a "slot" which can be compared to + * "hw_complete_count" at any time in the future. To convert + * "slot" into a "completion_slot", we access "hw_complete_count" + * once (knowing that we have reserved a slot, and thus, it will + * be "basically" accurate), and combine its high 40 bits with + * the 24 bit "slot", and handle "wrapping" by adding "1 << 24" + * if the result is LESS than "hw_complete_count". + */ + uint64_t complete; + complete = ACCESS_ONCE(dma_queue->hw_complete_count); + slot |= (complete & 0xffffffffff000000); + if (slot < complete) + slot += 0x1000000; + } + + /* + * If any of our slots mod 256 were equivalent to 0, go ahead and + * collect some egress credits, and update "hw_complete_count", and + * make sure the index doesn't overflow into the credits. + */ + if (unlikely(((old + num) & 0xff) < num)) { + __gxio_dma_queue_update_credits(dma_queue); + + /* Make sure the index doesn't overflow into the credits. */ +#ifdef __BIG_ENDIAN__ + *(((uint8_t *)&dma_queue->credits_and_next_index) + 4) = 0; +#else + *(((uint8_t *)&dma_queue->credits_and_next_index) + 3) = 0; +#endif + } + + return slot; +} + +/* Non-inlinable "__gxio_dma_queue_reserve(..., true)". */ +extern int64_t __gxio_dma_queue_reserve_aux(__gxio_dma_queue_t *dma_queue, + unsigned int num, int wait); + +/* Check whether a particular "completion slot" has completed. + * + * Note that this function requires a "completion slot", and thus + * cannot be used with the result of any "reserve_fast" function. + */ +extern int __gxio_dma_queue_is_complete(__gxio_dma_queue_t *dma_queue, + int64_t completion_slot, int update); + +#endif /* !_GXIO_DMA_QUEUE_H_ */ -- cgit v1.2.3-59-g8ed1b From 4875f69fecab08654972d6fb0d71ee2109d2538c Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Fri, 6 Apr 2012 16:38:03 -0400 Subject: arch/tile: provide kernel support for the tilegx mPIPE shim The TILE-Gx chip includes a packet-processing network engine called mPIPE ("Multicore Programmable Intelligent Packet Engine"). This change adds support for using the mPIPE engine from within the kernel. The engine has more functionality than is exposed here, but to keep the kernel code and binary simpler, this is a subset of the full API designed to enable standard Linux networking only. Signed-off-by: Chris Metcalf --- arch/tile/gxio/Kconfig | 6 + arch/tile/gxio/Makefile | 1 + arch/tile/gxio/iorpc_mpipe.c | 529 +++++++++ arch/tile/gxio/iorpc_mpipe_info.c | 85 ++ arch/tile/gxio/mpipe.c | 545 +++++++++ arch/tile/include/arch/mpipe.h | 359 ++++++ arch/tile/include/arch/mpipe_constants.h | 42 + arch/tile/include/arch/mpipe_def.h | 39 + arch/tile/include/arch/mpipe_shm.h | 509 +++++++++ arch/tile/include/arch/mpipe_shm_def.h | 23 + arch/tile/include/gxio/iorpc_mpipe.h | 136 +++ arch/tile/include/gxio/iorpc_mpipe_info.h | 46 + arch/tile/include/gxio/mpipe.h | 1736 +++++++++++++++++++++++++++++ arch/tile/include/hv/drv_mpipe_intf.h | 602 ++++++++++ 14 files changed, 4658 insertions(+) create mode 100644 arch/tile/gxio/iorpc_mpipe.c create mode 100644 arch/tile/gxio/iorpc_mpipe_info.c create mode 100644 arch/tile/gxio/mpipe.c create mode 100644 arch/tile/include/arch/mpipe.h create mode 100644 arch/tile/include/arch/mpipe_constants.h create mode 100644 arch/tile/include/arch/mpipe_def.h create mode 100644 arch/tile/include/arch/mpipe_shm.h create mode 100644 arch/tile/include/arch/mpipe_shm_def.h create mode 100644 arch/tile/include/gxio/iorpc_mpipe.h create mode 100644 arch/tile/include/gxio/iorpc_mpipe_info.h create mode 100644 arch/tile/include/gxio/mpipe.h create mode 100644 arch/tile/include/hv/drv_mpipe_intf.h diff --git a/arch/tile/gxio/Kconfig b/arch/tile/gxio/Kconfig index ecd076c8cfd5..8aeebb70a3df 100644 --- a/arch/tile/gxio/Kconfig +++ b/arch/tile/gxio/Kconfig @@ -9,3 +9,9 @@ config TILE_GXIO config TILE_GXIO_DMA bool select TILE_GXIO + +# Support direct access to the TILE-Gx mPIPE hardware from kernel space. +config TILE_GXIO_MPIPE + bool + select TILE_GXIO + select TILE_GXIO_DMA diff --git a/arch/tile/gxio/Makefile b/arch/tile/gxio/Makefile index 97ab468fb8c5..130eec48c152 100644 --- a/arch/tile/gxio/Makefile +++ b/arch/tile/gxio/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_TILE_GXIO) += iorpc_globals.o kiorpc.o obj-$(CONFIG_TILE_GXIO_DMA) += dma_queue.o +obj-$(CONFIG_TILE_GXIO_MPIPE) += mpipe.o iorpc_mpipe.o iorpc_mpipe_info.o diff --git a/arch/tile/gxio/iorpc_mpipe.c b/arch/tile/gxio/iorpc_mpipe.c new file mode 100644 index 000000000000..31b87bf8c027 --- /dev/null +++ b/arch/tile/gxio/iorpc_mpipe.c @@ -0,0 +1,529 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* This file is machine-generated; DO NOT EDIT! */ +#include "gxio/iorpc_mpipe.h" + +struct alloc_buffer_stacks_param { + unsigned int count; + unsigned int first; + unsigned int flags; +}; + +int gxio_mpipe_alloc_buffer_stacks(gxio_mpipe_context_t * context, + unsigned int count, unsigned int first, + unsigned int flags) +{ + struct alloc_buffer_stacks_param temp; + struct alloc_buffer_stacks_param *params = &temp; + + params->count = count; + params->first = first; + params->flags = flags; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), + GXIO_MPIPE_OP_ALLOC_BUFFER_STACKS); +} + +EXPORT_SYMBOL(gxio_mpipe_alloc_buffer_stacks); + +struct init_buffer_stack_aux_param { + union iorpc_mem_buffer buffer; + unsigned int stack; + unsigned int buffer_size_enum; +}; + +int gxio_mpipe_init_buffer_stack_aux(gxio_mpipe_context_t * context, + void *mem_va, size_t mem_size, + unsigned int mem_flags, unsigned int stack, + unsigned int buffer_size_enum) +{ + int __result; + unsigned long long __cpa; + pte_t __pte; + struct init_buffer_stack_aux_param temp; + struct init_buffer_stack_aux_param *params = &temp; + + __result = va_to_cpa_and_pte(mem_va, &__cpa, &__pte); + if (__result != 0) + return __result; + params->buffer.kernel.cpa = __cpa; + params->buffer.kernel.size = mem_size; + params->buffer.kernel.pte = __pte; + params->buffer.kernel.flags = mem_flags; + params->stack = stack; + params->buffer_size_enum = buffer_size_enum; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), + GXIO_MPIPE_OP_INIT_BUFFER_STACK_AUX); +} + +EXPORT_SYMBOL(gxio_mpipe_init_buffer_stack_aux); + + +struct alloc_notif_rings_param { + unsigned int count; + unsigned int first; + unsigned int flags; +}; + +int gxio_mpipe_alloc_notif_rings(gxio_mpipe_context_t * context, + unsigned int count, unsigned int first, + unsigned int flags) +{ + struct alloc_notif_rings_param temp; + struct alloc_notif_rings_param *params = &temp; + + params->count = count; + params->first = first; + params->flags = flags; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), GXIO_MPIPE_OP_ALLOC_NOTIF_RINGS); +} + +EXPORT_SYMBOL(gxio_mpipe_alloc_notif_rings); + +struct init_notif_ring_aux_param { + union iorpc_mem_buffer buffer; + unsigned int ring; +}; + +int gxio_mpipe_init_notif_ring_aux(gxio_mpipe_context_t * context, void *mem_va, + size_t mem_size, unsigned int mem_flags, + unsigned int ring) +{ + int __result; + unsigned long long __cpa; + pte_t __pte; + struct init_notif_ring_aux_param temp; + struct init_notif_ring_aux_param *params = &temp; + + __result = va_to_cpa_and_pte(mem_va, &__cpa, &__pte); + if (__result != 0) + return __result; + params->buffer.kernel.cpa = __cpa; + params->buffer.kernel.size = mem_size; + params->buffer.kernel.pte = __pte; + params->buffer.kernel.flags = mem_flags; + params->ring = ring; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), + GXIO_MPIPE_OP_INIT_NOTIF_RING_AUX); +} + +EXPORT_SYMBOL(gxio_mpipe_init_notif_ring_aux); + +struct request_notif_ring_interrupt_param { + union iorpc_interrupt interrupt; + unsigned int ring; +}; + +int gxio_mpipe_request_notif_ring_interrupt(gxio_mpipe_context_t * context, + int inter_x, int inter_y, + int inter_ipi, int inter_event, + unsigned int ring) +{ + struct request_notif_ring_interrupt_param temp; + struct request_notif_ring_interrupt_param *params = &temp; + + params->interrupt.kernel.x = inter_x; + params->interrupt.kernel.y = inter_y; + params->interrupt.kernel.ipi = inter_ipi; + params->interrupt.kernel.event = inter_event; + params->ring = ring; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), + GXIO_MPIPE_OP_REQUEST_NOTIF_RING_INTERRUPT); +} + +EXPORT_SYMBOL(gxio_mpipe_request_notif_ring_interrupt); + +struct enable_notif_ring_interrupt_param { + unsigned int ring; +}; + +int gxio_mpipe_enable_notif_ring_interrupt(gxio_mpipe_context_t * context, + unsigned int ring) +{ + struct enable_notif_ring_interrupt_param temp; + struct enable_notif_ring_interrupt_param *params = &temp; + + params->ring = ring; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), + GXIO_MPIPE_OP_ENABLE_NOTIF_RING_INTERRUPT); +} + +EXPORT_SYMBOL(gxio_mpipe_enable_notif_ring_interrupt); + +struct alloc_notif_groups_param { + unsigned int count; + unsigned int first; + unsigned int flags; +}; + +int gxio_mpipe_alloc_notif_groups(gxio_mpipe_context_t * context, + unsigned int count, unsigned int first, + unsigned int flags) +{ + struct alloc_notif_groups_param temp; + struct alloc_notif_groups_param *params = &temp; + + params->count = count; + params->first = first; + params->flags = flags; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), GXIO_MPIPE_OP_ALLOC_NOTIF_GROUPS); +} + +EXPORT_SYMBOL(gxio_mpipe_alloc_notif_groups); + +struct init_notif_group_param { + unsigned int group; + gxio_mpipe_notif_group_bits_t bits; +}; + +int gxio_mpipe_init_notif_group(gxio_mpipe_context_t * context, + unsigned int group, + gxio_mpipe_notif_group_bits_t bits) +{ + struct init_notif_group_param temp; + struct init_notif_group_param *params = &temp; + + params->group = group; + params->bits = bits; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), GXIO_MPIPE_OP_INIT_NOTIF_GROUP); +} + +EXPORT_SYMBOL(gxio_mpipe_init_notif_group); + +struct alloc_buckets_param { + unsigned int count; + unsigned int first; + unsigned int flags; +}; + +int gxio_mpipe_alloc_buckets(gxio_mpipe_context_t * context, unsigned int count, + unsigned int first, unsigned int flags) +{ + struct alloc_buckets_param temp; + struct alloc_buckets_param *params = &temp; + + params->count = count; + params->first = first; + params->flags = flags; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), GXIO_MPIPE_OP_ALLOC_BUCKETS); +} + +EXPORT_SYMBOL(gxio_mpipe_alloc_buckets); + +struct init_bucket_param { + unsigned int bucket; + MPIPE_LBL_INIT_DAT_BSTS_TBL_t bucket_info; +}; + +int gxio_mpipe_init_bucket(gxio_mpipe_context_t * context, unsigned int bucket, + MPIPE_LBL_INIT_DAT_BSTS_TBL_t bucket_info) +{ + struct init_bucket_param temp; + struct init_bucket_param *params = &temp; + + params->bucket = bucket; + params->bucket_info = bucket_info; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), GXIO_MPIPE_OP_INIT_BUCKET); +} + +EXPORT_SYMBOL(gxio_mpipe_init_bucket); + +struct alloc_edma_rings_param { + unsigned int count; + unsigned int first; + unsigned int flags; +}; + +int gxio_mpipe_alloc_edma_rings(gxio_mpipe_context_t * context, + unsigned int count, unsigned int first, + unsigned int flags) +{ + struct alloc_edma_rings_param temp; + struct alloc_edma_rings_param *params = &temp; + + params->count = count; + params->first = first; + params->flags = flags; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), GXIO_MPIPE_OP_ALLOC_EDMA_RINGS); +} + +EXPORT_SYMBOL(gxio_mpipe_alloc_edma_rings); + +struct init_edma_ring_aux_param { + union iorpc_mem_buffer buffer; + unsigned int ring; + unsigned int channel; +}; + +int gxio_mpipe_init_edma_ring_aux(gxio_mpipe_context_t * context, void *mem_va, + size_t mem_size, unsigned int mem_flags, + unsigned int ring, unsigned int channel) +{ + int __result; + unsigned long long __cpa; + pte_t __pte; + struct init_edma_ring_aux_param temp; + struct init_edma_ring_aux_param *params = &temp; + + __result = va_to_cpa_and_pte(mem_va, &__cpa, &__pte); + if (__result != 0) + return __result; + params->buffer.kernel.cpa = __cpa; + params->buffer.kernel.size = mem_size; + params->buffer.kernel.pte = __pte; + params->buffer.kernel.flags = mem_flags; + params->ring = ring; + params->channel = channel; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), GXIO_MPIPE_OP_INIT_EDMA_RING_AUX); +} + +EXPORT_SYMBOL(gxio_mpipe_init_edma_ring_aux); + + +int gxio_mpipe_commit_rules(gxio_mpipe_context_t * context, const void *blob, + size_t blob_size) +{ + const void *params = blob; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, blob_size, + GXIO_MPIPE_OP_COMMIT_RULES); +} + +EXPORT_SYMBOL(gxio_mpipe_commit_rules); + +struct register_client_memory_param { + unsigned int iotlb; + HV_PTE pte; + unsigned int flags; +}; + +int gxio_mpipe_register_client_memory(gxio_mpipe_context_t * context, + unsigned int iotlb, HV_PTE pte, + unsigned int flags) +{ + struct register_client_memory_param temp; + struct register_client_memory_param *params = &temp; + + params->iotlb = iotlb; + params->pte = pte; + params->flags = flags; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), + GXIO_MPIPE_OP_REGISTER_CLIENT_MEMORY); +} + +EXPORT_SYMBOL(gxio_mpipe_register_client_memory); + +struct link_open_aux_param { + _gxio_mpipe_link_name_t name; + unsigned int flags; +}; + +int gxio_mpipe_link_open_aux(gxio_mpipe_context_t * context, + _gxio_mpipe_link_name_t name, unsigned int flags) +{ + struct link_open_aux_param temp; + struct link_open_aux_param *params = &temp; + + params->name = name; + params->flags = flags; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), GXIO_MPIPE_OP_LINK_OPEN_AUX); +} + +EXPORT_SYMBOL(gxio_mpipe_link_open_aux); + +struct link_close_aux_param { + int mac; +}; + +int gxio_mpipe_link_close_aux(gxio_mpipe_context_t * context, int mac) +{ + struct link_close_aux_param temp; + struct link_close_aux_param *params = &temp; + + params->mac = mac; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), GXIO_MPIPE_OP_LINK_CLOSE_AUX); +} + +EXPORT_SYMBOL(gxio_mpipe_link_close_aux); + + +struct get_timestamp_aux_param { + uint64_t sec; + uint64_t nsec; + uint64_t cycles; +}; + +int gxio_mpipe_get_timestamp_aux(gxio_mpipe_context_t * context, uint64_t * sec, + uint64_t * nsec, uint64_t * cycles) +{ + int __result; + struct get_timestamp_aux_param temp; + struct get_timestamp_aux_param *params = &temp; + + __result = + hv_dev_pread(context->fd, 0, (HV_VirtAddr) params, sizeof(*params), + GXIO_MPIPE_OP_GET_TIMESTAMP_AUX); + *sec = params->sec; + *nsec = params->nsec; + *cycles = params->cycles; + + return __result; +} + +EXPORT_SYMBOL(gxio_mpipe_get_timestamp_aux); + +struct set_timestamp_aux_param { + uint64_t sec; + uint64_t nsec; + uint64_t cycles; +}; + +int gxio_mpipe_set_timestamp_aux(gxio_mpipe_context_t * context, uint64_t sec, + uint64_t nsec, uint64_t cycles) +{ + struct set_timestamp_aux_param temp; + struct set_timestamp_aux_param *params = &temp; + + params->sec = sec; + params->nsec = nsec; + params->cycles = cycles; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), GXIO_MPIPE_OP_SET_TIMESTAMP_AUX); +} + +EXPORT_SYMBOL(gxio_mpipe_set_timestamp_aux); + +struct adjust_timestamp_aux_param { + int64_t nsec; +}; + +int gxio_mpipe_adjust_timestamp_aux(gxio_mpipe_context_t * context, + int64_t nsec) +{ + struct adjust_timestamp_aux_param temp; + struct adjust_timestamp_aux_param *params = &temp; + + params->nsec = nsec; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), + GXIO_MPIPE_OP_ADJUST_TIMESTAMP_AUX); +} + +EXPORT_SYMBOL(gxio_mpipe_adjust_timestamp_aux); + +struct arm_pollfd_param { + union iorpc_pollfd pollfd; +}; + +int gxio_mpipe_arm_pollfd(gxio_mpipe_context_t * context, int pollfd_cookie) +{ + struct arm_pollfd_param temp; + struct arm_pollfd_param *params = &temp; + + params->pollfd.kernel.cookie = pollfd_cookie; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), GXIO_MPIPE_OP_ARM_POLLFD); +} + +EXPORT_SYMBOL(gxio_mpipe_arm_pollfd); + +struct close_pollfd_param { + union iorpc_pollfd pollfd; +}; + +int gxio_mpipe_close_pollfd(gxio_mpipe_context_t * context, int pollfd_cookie) +{ + struct close_pollfd_param temp; + struct close_pollfd_param *params = &temp; + + params->pollfd.kernel.cookie = pollfd_cookie; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), GXIO_MPIPE_OP_CLOSE_POLLFD); +} + +EXPORT_SYMBOL(gxio_mpipe_close_pollfd); + +struct get_mmio_base_param { + HV_PTE base; +}; + +int gxio_mpipe_get_mmio_base(gxio_mpipe_context_t * context, HV_PTE *base) +{ + int __result; + struct get_mmio_base_param temp; + struct get_mmio_base_param *params = &temp; + + __result = + hv_dev_pread(context->fd, 0, (HV_VirtAddr) params, sizeof(*params), + GXIO_MPIPE_OP_GET_MMIO_BASE); + *base = params->base; + + return __result; +} + +EXPORT_SYMBOL(gxio_mpipe_get_mmio_base); + +struct check_mmio_offset_param { + unsigned long offset; + unsigned long size; +}; + +int gxio_mpipe_check_mmio_offset(gxio_mpipe_context_t * context, + unsigned long offset, unsigned long size) +{ + struct check_mmio_offset_param temp; + struct check_mmio_offset_param *params = &temp; + + params->offset = offset; + params->size = size; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), GXIO_MPIPE_OP_CHECK_MMIO_OFFSET); +} + +EXPORT_SYMBOL(gxio_mpipe_check_mmio_offset); diff --git a/arch/tile/gxio/iorpc_mpipe_info.c b/arch/tile/gxio/iorpc_mpipe_info.c new file mode 100644 index 000000000000..d0254aa60cba --- /dev/null +++ b/arch/tile/gxio/iorpc_mpipe_info.c @@ -0,0 +1,85 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* This file is machine-generated; DO NOT EDIT! */ +#include "gxio/iorpc_mpipe_info.h" + + +struct enumerate_aux_param { + _gxio_mpipe_link_name_t name; + _gxio_mpipe_link_mac_t mac; +}; + +int gxio_mpipe_info_enumerate_aux(gxio_mpipe_info_context_t * context, + unsigned int idx, + _gxio_mpipe_link_name_t * name, + _gxio_mpipe_link_mac_t * mac) +{ + int __result; + struct enumerate_aux_param temp; + struct enumerate_aux_param *params = &temp; + + __result = + hv_dev_pread(context->fd, 0, (HV_VirtAddr) params, sizeof(*params), + (((uint64_t) idx << 32) | + GXIO_MPIPE_INFO_OP_ENUMERATE_AUX)); + *name = params->name; + *mac = params->mac; + + return __result; +} + +EXPORT_SYMBOL(gxio_mpipe_info_enumerate_aux); + +struct get_mmio_base_param { + HV_PTE base; +}; + +int gxio_mpipe_info_get_mmio_base(gxio_mpipe_info_context_t * context, + HV_PTE *base) +{ + int __result; + struct get_mmio_base_param temp; + struct get_mmio_base_param *params = &temp; + + __result = + hv_dev_pread(context->fd, 0, (HV_VirtAddr) params, sizeof(*params), + GXIO_MPIPE_INFO_OP_GET_MMIO_BASE); + *base = params->base; + + return __result; +} + +EXPORT_SYMBOL(gxio_mpipe_info_get_mmio_base); + +struct check_mmio_offset_param { + unsigned long offset; + unsigned long size; +}; + +int gxio_mpipe_info_check_mmio_offset(gxio_mpipe_info_context_t * context, + unsigned long offset, unsigned long size) +{ + struct check_mmio_offset_param temp; + struct check_mmio_offset_param *params = &temp; + + params->offset = offset; + params->size = size; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), + GXIO_MPIPE_INFO_OP_CHECK_MMIO_OFFSET); +} + +EXPORT_SYMBOL(gxio_mpipe_info_check_mmio_offset); diff --git a/arch/tile/gxio/mpipe.c b/arch/tile/gxio/mpipe.c new file mode 100644 index 000000000000..e71c63390acc --- /dev/null +++ b/arch/tile/gxio/mpipe.c @@ -0,0 +1,545 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* + * Implementation of mpipe gxio calls. + */ + +#include +#include +#include + +#include +#include +#include +#include +#include + +/* HACK: Avoid pointless "shadow" warnings. */ +#define link link_shadow + +int gxio_mpipe_init(gxio_mpipe_context_t *context, unsigned int mpipe_index) +{ + char file[32]; + + int fd; + int i; + + snprintf(file, sizeof(file), "mpipe/%d/iorpc", mpipe_index); + fd = hv_dev_open((HV_VirtAddr) file, 0); + if (fd < 0) { + if (fd >= GXIO_ERR_MIN && fd <= GXIO_ERR_MAX) + return fd; + else + return -ENODEV; + } + + context->fd = fd; + + /* Map in the MMIO space. */ + context->mmio_cfg_base = (void __force *) + iorpc_ioremap(fd, HV_MPIPE_CONFIG_MMIO_OFFSET, + HV_MPIPE_CONFIG_MMIO_SIZE); + if (context->mmio_cfg_base == NULL) + goto cfg_failed; + + context->mmio_fast_base = (void __force *) + iorpc_ioremap(fd, HV_MPIPE_FAST_MMIO_OFFSET, + HV_MPIPE_FAST_MMIO_SIZE); + if (context->mmio_fast_base == NULL) + goto fast_failed; + + /* Initialize the stacks. */ + for (i = 0; i < 8; i++) + context->__stacks.stacks[i] = 255; + + return 0; + + fast_failed: + iounmap((void __force __iomem *)(context->mmio_cfg_base)); + cfg_failed: + hv_dev_close(context->fd); + return -ENODEV; +} + +EXPORT_SYMBOL_GPL(gxio_mpipe_init); + +int gxio_mpipe_destroy(gxio_mpipe_context_t *context) +{ + iounmap((void __force __iomem *)(context->mmio_cfg_base)); + iounmap((void __force __iomem *)(context->mmio_fast_base)); + return hv_dev_close(context->fd); +} + +EXPORT_SYMBOL_GPL(gxio_mpipe_destroy); + +static int16_t gxio_mpipe_buffer_sizes[8] = + { 128, 256, 512, 1024, 1664, 4096, 10368, 16384 }; + +gxio_mpipe_buffer_size_enum_t gxio_mpipe_buffer_size_to_buffer_size_enum(size_t + size) +{ + int i; + for (i = 0; i < 7; i++) + if (size <= gxio_mpipe_buffer_sizes[i]) + break; + return i; +} + +EXPORT_SYMBOL_GPL(gxio_mpipe_buffer_size_to_buffer_size_enum); + +size_t gxio_mpipe_buffer_size_enum_to_buffer_size(gxio_mpipe_buffer_size_enum_t + buffer_size_enum) +{ + if (buffer_size_enum > 7) + buffer_size_enum = 7; + + return gxio_mpipe_buffer_sizes[buffer_size_enum]; +} + +EXPORT_SYMBOL_GPL(gxio_mpipe_buffer_size_enum_to_buffer_size); + +size_t gxio_mpipe_calc_buffer_stack_bytes(unsigned long buffers) +{ + const int BUFFERS_PER_LINE = 12; + + /* Count the number of cachlines. */ + unsigned long lines = + (buffers + BUFFERS_PER_LINE - 1) / BUFFERS_PER_LINE; + + /* Convert to bytes. */ + return lines * CHIP_L2_LINE_SIZE(); +} + +EXPORT_SYMBOL_GPL(gxio_mpipe_calc_buffer_stack_bytes); + +int gxio_mpipe_init_buffer_stack(gxio_mpipe_context_t *context, + unsigned int stack, + gxio_mpipe_buffer_size_enum_t + buffer_size_enum, void *mem, size_t mem_size, + unsigned int mem_flags) +{ + int result; + + memset(mem, 0, mem_size); + + result = gxio_mpipe_init_buffer_stack_aux(context, mem, mem_size, + mem_flags, stack, + buffer_size_enum); + if (result < 0) + return result; + + /* Save the stack. */ + context->__stacks.stacks[buffer_size_enum] = stack; + + return 0; +} + +EXPORT_SYMBOL_GPL(gxio_mpipe_init_buffer_stack); + +int gxio_mpipe_init_notif_ring(gxio_mpipe_context_t *context, + unsigned int ring, + void *mem, size_t mem_size, + unsigned int mem_flags) +{ + return gxio_mpipe_init_notif_ring_aux(context, mem, mem_size, + mem_flags, ring); +} + +EXPORT_SYMBOL_GPL(gxio_mpipe_init_notif_ring); + +int gxio_mpipe_init_notif_group_and_buckets(gxio_mpipe_context_t *context, + unsigned int group, + unsigned int ring, + unsigned int num_rings, + unsigned int bucket, + unsigned int num_buckets, + gxio_mpipe_bucket_mode_t mode) +{ + int i; + int result; + + gxio_mpipe_bucket_info_t bucket_info = { { + .group = group, + .mode = mode, + } + }; + + gxio_mpipe_notif_group_bits_t bits = { {0} }; + + for (i = 0; i < num_rings; i++) + gxio_mpipe_notif_group_add_ring(&bits, ring + i); + + result = gxio_mpipe_init_notif_group(context, group, bits); + if (result != 0) + return result; + + for (i = 0; i < num_buckets; i++) { + bucket_info.notifring = ring + (i % num_rings); + + result = gxio_mpipe_init_bucket(context, bucket + i, + bucket_info); + if (result != 0) + return result; + } + + return 0; +} + +EXPORT_SYMBOL_GPL(gxio_mpipe_init_notif_group_and_buckets); + +int gxio_mpipe_init_edma_ring(gxio_mpipe_context_t *context, + unsigned int ring, unsigned int channel, + void *mem, size_t mem_size, + unsigned int mem_flags) +{ + memset(mem, 0, mem_size); + + return gxio_mpipe_init_edma_ring_aux(context, mem, mem_size, mem_flags, + ring, channel); +} + +EXPORT_SYMBOL_GPL(gxio_mpipe_init_edma_ring); + +void gxio_mpipe_rules_init(gxio_mpipe_rules_t *rules, + gxio_mpipe_context_t *context) +{ + rules->context = context; + memset(&rules->list, 0, sizeof(rules->list)); +} + +EXPORT_SYMBOL_GPL(gxio_mpipe_rules_init); + +int gxio_mpipe_rules_begin(gxio_mpipe_rules_t *rules, + unsigned int bucket, unsigned int num_buckets, + gxio_mpipe_rules_stacks_t *stacks) +{ + int i; + int stack = 255; + + gxio_mpipe_rules_list_t *list = &rules->list; + + /* Current rule. */ + gxio_mpipe_rules_rule_t *rule = + (gxio_mpipe_rules_rule_t *) (list->rules + list->head); + + unsigned int head = list->tail; + + /* + * Align next rule properly. + *Note that "dmacs_and_vlans" will also be aligned. + */ + unsigned int pad = 0; + while (((head + pad) % __alignof__(gxio_mpipe_rules_rule_t)) != 0) + pad++; + + /* + * Verify room. + * ISSUE: Mark rules as broken on error? + */ + if (head + pad + sizeof(*rule) >= sizeof(list->rules)) + return GXIO_MPIPE_ERR_RULES_FULL; + + /* Verify num_buckets is a power of 2. */ + if (__builtin_popcount(num_buckets) != 1) + return GXIO_MPIPE_ERR_RULES_INVALID; + + /* Add padding to previous rule. */ + rule->size += pad; + + /* Start a new rule. */ + list->head = head + pad; + + rule = (gxio_mpipe_rules_rule_t *) (list->rules + list->head); + + /* Default some values. */ + rule->headroom = 2; + rule->tailroom = 0; + rule->capacity = 16384; + + /* Save the bucket info. */ + rule->bucket_mask = num_buckets - 1; + rule->bucket_first = bucket; + + for (i = 8 - 1; i >= 0; i--) { + int maybe = + stacks ? stacks->stacks[i] : rules->context->__stacks. + stacks[i]; + if (maybe != 255) + stack = maybe; + rule->stacks.stacks[i] = stack; + } + + if (stack == 255) + return GXIO_MPIPE_ERR_RULES_INVALID; + + /* NOTE: Only entries at the end of the array can be 255. */ + for (i = 8 - 1; i > 0; i--) { + if (rule->stacks.stacks[i] == 255) { + rule->stacks.stacks[i] = stack; + rule->capacity = + gxio_mpipe_buffer_size_enum_to_buffer_size(i - + 1); + } + } + + rule->size = sizeof(*rule); + list->tail = list->head + rule->size; + + return 0; +} + +EXPORT_SYMBOL_GPL(gxio_mpipe_rules_begin); + +int gxio_mpipe_rules_add_channel(gxio_mpipe_rules_t *rules, + unsigned int channel) +{ + gxio_mpipe_rules_list_t *list = &rules->list; + + gxio_mpipe_rules_rule_t *rule = + (gxio_mpipe_rules_rule_t *) (list->rules + list->head); + + /* Verify channel. */ + if (channel >= 32) + return GXIO_MPIPE_ERR_RULES_INVALID; + + /* Verify begun. */ + if (list->tail == 0) + return GXIO_MPIPE_ERR_RULES_EMPTY; + + rule->channel_bits |= (1UL << channel); + + return 0; +} + +EXPORT_SYMBOL_GPL(gxio_mpipe_rules_add_channel); + +int gxio_mpipe_rules_set_headroom(gxio_mpipe_rules_t *rules, uint8_t headroom) +{ + gxio_mpipe_rules_list_t *list = &rules->list; + + gxio_mpipe_rules_rule_t *rule = + (gxio_mpipe_rules_rule_t *) (list->rules + list->head); + + /* Verify begun. */ + if (list->tail == 0) + return GXIO_MPIPE_ERR_RULES_EMPTY; + + rule->headroom = headroom; + + return 0; +} + +EXPORT_SYMBOL_GPL(gxio_mpipe_rules_set_headroom); + +int gxio_mpipe_rules_commit(gxio_mpipe_rules_t *rules) +{ + gxio_mpipe_rules_list_t *list = &rules->list; + unsigned int size = + offsetof(gxio_mpipe_rules_list_t, rules) + list->tail; + return gxio_mpipe_commit_rules(rules->context, list, size); +} + +EXPORT_SYMBOL_GPL(gxio_mpipe_rules_commit); + +int gxio_mpipe_iqueue_init(gxio_mpipe_iqueue_t *iqueue, + gxio_mpipe_context_t *context, + unsigned int ring, + void *mem, size_t mem_size, unsigned int mem_flags) +{ + /* The init call below will verify that "mem_size" is legal. */ + unsigned int num_entries = mem_size / sizeof(gxio_mpipe_idesc_t); + + iqueue->context = context; + iqueue->idescs = (gxio_mpipe_idesc_t *)mem; + iqueue->ring = ring; + iqueue->num_entries = num_entries; + iqueue->mask_num_entries = num_entries - 1; + iqueue->log2_num_entries = __builtin_ctz(num_entries); + iqueue->head = 1; +#ifdef __BIG_ENDIAN__ + iqueue->swapped = 0; +#endif + + /* Initialize the "tail". */ + __gxio_mmio_write(mem, iqueue->head); + + return gxio_mpipe_init_notif_ring(context, ring, mem, mem_size, + mem_flags); +} + +EXPORT_SYMBOL_GPL(gxio_mpipe_iqueue_init); + +int gxio_mpipe_equeue_init(gxio_mpipe_equeue_t *equeue, + gxio_mpipe_context_t *context, + unsigned int edma_ring_id, + unsigned int channel, + void *mem, unsigned int mem_size, + unsigned int mem_flags) +{ + /* The init call below will verify that "mem_size" is legal. */ + unsigned int num_entries = mem_size / sizeof(gxio_mpipe_edesc_t); + + /* Offset used to read number of completed commands. */ + MPIPE_EDMA_POST_REGION_ADDR_t offset; + + int result = gxio_mpipe_init_edma_ring(context, edma_ring_id, channel, + mem, mem_size, mem_flags); + if (result < 0) + return result; + + memset(equeue, 0, sizeof(*equeue)); + + offset.word = 0; + offset.region = + MPIPE_MMIO_ADDR__REGION_VAL_EDMA - + MPIPE_MMIO_ADDR__REGION_VAL_IDMA; + offset.ring = edma_ring_id; + + __gxio_dma_queue_init(&equeue->dma_queue, + context->mmio_fast_base + offset.word, + num_entries); + equeue->edescs = mem; + equeue->mask_num_entries = num_entries - 1; + equeue->log2_num_entries = __builtin_ctz(num_entries); + + return 0; +} + +EXPORT_SYMBOL_GPL(gxio_mpipe_equeue_init); + +int gxio_mpipe_set_timestamp(gxio_mpipe_context_t *context, + const struct timespec *ts) +{ + cycles_t cycles = get_cycles(); + return gxio_mpipe_set_timestamp_aux(context, (uint64_t)ts->tv_sec, + (uint64_t)ts->tv_nsec, + (uint64_t)cycles); +} + +int gxio_mpipe_get_timestamp(gxio_mpipe_context_t *context, + struct timespec *ts) +{ + int ret; + cycles_t cycles_prev, cycles_now, clock_rate; + cycles_prev = get_cycles(); + ret = gxio_mpipe_get_timestamp_aux(context, (uint64_t *)&ts->tv_sec, + (uint64_t *)&ts->tv_nsec, + (uint64_t *)&cycles_now); + if (ret < 0) { + return ret; + } + + clock_rate = get_clock_rate(); + ts->tv_nsec -= (cycles_now - cycles_prev) * 1000000000LL / clock_rate; + if (ts->tv_nsec < 0) { + ts->tv_nsec += 1000000000LL; + ts->tv_sec -= 1; + } + return ret; +} + +int gxio_mpipe_adjust_timestamp(gxio_mpipe_context_t *context, int64_t delta) +{ + return gxio_mpipe_adjust_timestamp_aux(context, delta); +} + +/* Get our internal context used for link name access. This context is + * special in that it is not associated with an mPIPE service domain. + */ +static gxio_mpipe_context_t *_gxio_get_link_context(void) +{ + static gxio_mpipe_context_t context; + static gxio_mpipe_context_t *contextp; + static int tried_open = 0; + static DEFINE_MUTEX(mutex); + + mutex_lock(&mutex); + + if (!tried_open) { + int i = 0; + tried_open = 1; + + /* + * "4" here is the maximum possible number of mPIPE shims; it's + * an exaggeration but we shouldn't ever go beyond 2 anyway. + */ + for (i = 0; i < 4; i++) { + char file[80]; + + snprintf(file, sizeof(file), "mpipe/%d/iorpc_info", i); + context.fd = hv_dev_open((HV_VirtAddr) file, 0); + if (context.fd < 0) + continue; + + contextp = &context; + break; + } + } + + mutex_unlock(&mutex); + + return contextp; +} + +int gxio_mpipe_link_enumerate_mac(int idx, char *link_name, uint8_t *link_mac) +{ + int rv; + _gxio_mpipe_link_name_t name; + _gxio_mpipe_link_mac_t mac; + + gxio_mpipe_context_t *context = _gxio_get_link_context(); + if (!context) + return GXIO_ERR_NO_DEVICE; + + rv = gxio_mpipe_info_enumerate_aux(context, idx, &name, &mac); + if (rv >= 0) { + strncpy(link_name, name.name, sizeof(name.name)); + memcpy(link_mac, mac.mac, sizeof(mac.mac)); + } + + return rv; +} + +EXPORT_SYMBOL_GPL(gxio_mpipe_link_enumerate_mac); + +int gxio_mpipe_link_open(gxio_mpipe_link_t *link, + gxio_mpipe_context_t *context, const char *link_name, + unsigned int flags) +{ + _gxio_mpipe_link_name_t name; + int rv; + + strncpy(name.name, link_name, sizeof(name.name)); + name.name[GXIO_MPIPE_LINK_NAME_LEN - 1] = '\0'; + + rv = gxio_mpipe_link_open_aux(context, name, flags); + if (rv < 0) + return rv; + + link->context = context; + link->channel = rv >> 8; + link->mac = rv & 0xFF; + + return 0; +} + +EXPORT_SYMBOL_GPL(gxio_mpipe_link_open); + +int gxio_mpipe_link_close(gxio_mpipe_link_t *link) +{ + return gxio_mpipe_link_close_aux(link->context, link->mac); +} + +EXPORT_SYMBOL_GPL(gxio_mpipe_link_close); diff --git a/arch/tile/include/arch/mpipe.h b/arch/tile/include/arch/mpipe.h new file mode 100644 index 000000000000..8a33912fd6cc --- /dev/null +++ b/arch/tile/include/arch/mpipe.h @@ -0,0 +1,359 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* Machine-generated file; do not edit. */ + +#ifndef __ARCH_MPIPE_H__ +#define __ARCH_MPIPE_H__ + +#include +#include + +#ifndef __ASSEMBLER__ + +/* + * MMIO Ingress DMA Release Region Address. + * This is a description of the physical addresses used to manipulate ingress + * credit counters. Accesses to this address space should use an address of + * this form and a value like that specified in IDMA_RELEASE_REGION_VAL. + */ + +__extension__ +typedef union +{ + struct + { +#ifndef __BIG_ENDIAN__ + /* Reserved. */ + uint_reg_t __reserved_0 : 3; + /* NotifRing to be released */ + uint_reg_t ring : 8; + /* Bucket to be released */ + uint_reg_t bucket : 13; + /* Enable NotifRing release */ + uint_reg_t ring_enable : 1; + /* Enable Bucket release */ + uint_reg_t bucket_enable : 1; + /* + * This field of the address selects the region (address space) to be + * accessed. For the iDMA release region, this field must be 4. + */ + uint_reg_t region : 3; + /* Reserved. */ + uint_reg_t __reserved_1 : 6; + /* This field of the address indexes the 32 entry service domain table. */ + uint_reg_t svc_dom : 5; + /* Reserved. */ + uint_reg_t __reserved_2 : 24; +#else /* __BIG_ENDIAN__ */ + uint_reg_t __reserved_2 : 24; + uint_reg_t svc_dom : 5; + uint_reg_t __reserved_1 : 6; + uint_reg_t region : 3; + uint_reg_t bucket_enable : 1; + uint_reg_t ring_enable : 1; + uint_reg_t bucket : 13; + uint_reg_t ring : 8; + uint_reg_t __reserved_0 : 3; +#endif + }; + + uint_reg_t word; +} MPIPE_IDMA_RELEASE_REGION_ADDR_t; + +/* + * MMIO Ingress DMA Release Region Value - Release NotifRing and/or Bucket. + * Provides release of the associated NotifRing. The address of the MMIO + * operation is described in IDMA_RELEASE_REGION_ADDR. + */ + +__extension__ +typedef union +{ + struct + { +#ifndef __BIG_ENDIAN__ + /* + * Number of packets being released. The load balancer's count of + * inflight packets will be decremented by this amount for the associated + * Bucket and/or NotifRing + */ + uint_reg_t count : 16; + /* Reserved. */ + uint_reg_t __reserved : 48; +#else /* __BIG_ENDIAN__ */ + uint_reg_t __reserved : 48; + uint_reg_t count : 16; +#endif + }; + + uint_reg_t word; +} MPIPE_IDMA_RELEASE_REGION_VAL_t; + +/* + * MMIO Buffer Stack Manager Region Address. + * This MMIO region is used for posting or fetching buffers to/from the + * buffer stack manager. On an MMIO load, this pops a buffer descriptor from + * the top of stack if one is available. On an MMIO store, this pushes a + * buffer to the stack. The value read or written is described in + * BSM_REGION_VAL. + */ + +__extension__ +typedef union +{ + struct + { +#ifndef __BIG_ENDIAN__ + /* Reserved. */ + uint_reg_t __reserved_0 : 3; + /* BufferStack being accessed. */ + uint_reg_t stack : 5; + /* Reserved. */ + uint_reg_t __reserved_1 : 18; + /* + * This field of the address selects the region (address space) to be + * accessed. For the buffer stack manager region, this field must be 6. + */ + uint_reg_t region : 3; + /* Reserved. */ + uint_reg_t __reserved_2 : 6; + /* This field of the address indexes the 32 entry service domain table. */ + uint_reg_t svc_dom : 5; + /* Reserved. */ + uint_reg_t __reserved_3 : 24; +#else /* __BIG_ENDIAN__ */ + uint_reg_t __reserved_3 : 24; + uint_reg_t svc_dom : 5; + uint_reg_t __reserved_2 : 6; + uint_reg_t region : 3; + uint_reg_t __reserved_1 : 18; + uint_reg_t stack : 5; + uint_reg_t __reserved_0 : 3; +#endif + }; + + uint_reg_t word; +} MPIPE_BSM_REGION_ADDR_t; + +/* + * MMIO Buffer Stack Manager Region Value. + * This MMIO region is used for posting or fetching buffers to/from the + * buffer stack manager. On an MMIO load, this pops a buffer descriptor from + * the top of stack if one is available. On an MMIO store, this pushes a + * buffer to the stack. The address of the MMIO operation is described in + * BSM_REGION_ADDR. + */ + +__extension__ +typedef union +{ + struct + { +#ifndef __BIG_ENDIAN__ + /* Reserved. */ + uint_reg_t __reserved_0 : 7; + /* + * Base virtual address of the buffer. Must be sign extended by consumer. + */ + int_reg_t va : 35; + /* Reserved. */ + uint_reg_t __reserved_1 : 6; + /* + * Index of the buffer stack to which this buffer belongs. Ignored on + * writes since the offset bits specify the stack being accessed. + */ + uint_reg_t stack_idx : 5; + /* Reserved. */ + uint_reg_t __reserved_2 : 5; + /* + * Reads as one to indicate that this is a hardware managed buffer. + * Ignored on writes since all buffers on a given stack are the same size. + */ + uint_reg_t hwb : 1; + /* + * Encoded size of buffer (ignored on writes): + * 0 = 128 bytes + * 1 = 256 bytes + * 2 = 512 bytes + * 3 = 1024 bytes + * 4 = 1664 bytes + * 5 = 4096 bytes + * 6 = 10368 bytes + * 7 = 16384 bytes + */ + uint_reg_t size : 3; + /* + * Valid indication for the buffer. Ignored on writes. + * 0 : Valid buffer descriptor popped from stack. + * 3 : Could not pop a buffer from the stack. Either the stack is empty, + * or the hardware's prefetch buffer is empty for this stack. + */ + uint_reg_t c : 2; +#else /* __BIG_ENDIAN__ */ + uint_reg_t c : 2; + uint_reg_t size : 3; + uint_reg_t hwb : 1; + uint_reg_t __reserved_2 : 5; + uint_reg_t stack_idx : 5; + uint_reg_t __reserved_1 : 6; + int_reg_t va : 35; + uint_reg_t __reserved_0 : 7; +#endif + }; + + uint_reg_t word; +} MPIPE_BSM_REGION_VAL_t; + +/* + * MMIO Egress DMA Post Region Address. + * Used to post descriptor locations to the eDMA descriptor engine. The + * value to be written is described in EDMA_POST_REGION_VAL + */ + +__extension__ +typedef union +{ + struct + { +#ifndef __BIG_ENDIAN__ + /* Reserved. */ + uint_reg_t __reserved_0 : 3; + /* eDMA ring being accessed */ + uint_reg_t ring : 5; + /* Reserved. */ + uint_reg_t __reserved_1 : 18; + /* + * This field of the address selects the region (address space) to be + * accessed. For the egress DMA post region, this field must be 5. + */ + uint_reg_t region : 3; + /* Reserved. */ + uint_reg_t __reserved_2 : 6; + /* This field of the address indexes the 32 entry service domain table. */ + uint_reg_t svc_dom : 5; + /* Reserved. */ + uint_reg_t __reserved_3 : 24; +#else /* __BIG_ENDIAN__ */ + uint_reg_t __reserved_3 : 24; + uint_reg_t svc_dom : 5; + uint_reg_t __reserved_2 : 6; + uint_reg_t region : 3; + uint_reg_t __reserved_1 : 18; + uint_reg_t ring : 5; + uint_reg_t __reserved_0 : 3; +#endif + }; + + uint_reg_t word; +} MPIPE_EDMA_POST_REGION_ADDR_t; + +/* + * MMIO Egress DMA Post Region Value. + * Used to post descriptor locations to the eDMA descriptor engine. The + * address is described in EDMA_POST_REGION_ADDR. + */ + +__extension__ +typedef union +{ + struct + { +#ifndef __BIG_ENDIAN__ + /* + * For writes, this specifies the current ring tail pointer prior to any + * post. For example, to post 1 or more descriptors starting at location + * 23, this would contain 23 (not 24). On writes, this index must be + * masked based on the ring size. The new tail pointer after this post + * is COUNT+RING_IDX (masked by the ring size). + * + * For reads, this provides the hardware descriptor fetcher's head + * pointer. The descriptors prior to the head pointer, however, may not + * yet have been processed so this indicator is only used to determine + * how full the ring is and if software may post more descriptors. + */ + uint_reg_t ring_idx : 16; + /* + * For writes, this specifies number of contiguous descriptors that are + * being posted. Software may post up to RingSize descriptors with a + * single MMIO store. A zero in this field on a write will "wake up" an + * eDMA ring and cause it fetch descriptors regardless of the hardware's + * current view of the state of the tail pointer. + * + * For reads, this field provides a rolling count of the number of + * descriptors that have been completely processed. This may be used by + * software to determine when buffers associated with a descriptor may be + * returned or reused. When the ring's flush bit is cleared by software + * (after having been set by HW or SW), the COUNT will be cleared. + */ + uint_reg_t count : 16; + /* + * For writes, this specifies the generation number of the tail being + * posted. Note that if tail+cnt wraps to the beginning of the ring, the + * eDMA hardware assumes that the descriptors posted at the beginning of + * the ring are also valid so it is okay to post around the wrap point. + * + * For reads, this is the current generation number. Valid descriptors + * will have the inverse of this generation number. + */ + uint_reg_t gen : 1; + /* Reserved. */ + uint_reg_t __reserved : 31; +#else /* __BIG_ENDIAN__ */ + uint_reg_t __reserved : 31; + uint_reg_t gen : 1; + uint_reg_t count : 16; + uint_reg_t ring_idx : 16; +#endif + }; + + uint_reg_t word; +} MPIPE_EDMA_POST_REGION_VAL_t; + +/* + * Load Balancer Bucket Status Data. + * Read/Write data for load balancer Bucket-Status Table. 4160 entries + * indexed by LBL_INIT_CTL.IDX when LBL_INIT_CTL.STRUCT_SEL is BSTS_TBL + */ + +__extension__ +typedef union +{ + struct + { +#ifndef __BIG_ENDIAN__ + /* NotifRing currently assigned to this bucket. */ + uint_reg_t notifring : 8; + /* Current reference count. */ + uint_reg_t count : 16; + /* Group associated with this bucket. */ + uint_reg_t group : 5; + /* Mode select for this bucket. */ + uint_reg_t mode : 3; + /* Reserved. */ + uint_reg_t __reserved : 32; +#else /* __BIG_ENDIAN__ */ + uint_reg_t __reserved : 32; + uint_reg_t mode : 3; + uint_reg_t group : 5; + uint_reg_t count : 16; + uint_reg_t notifring : 8; +#endif + }; + + uint_reg_t word; +} MPIPE_LBL_INIT_DAT_BSTS_TBL_t; +#endif /* !defined(__ASSEMBLER__) */ + +#endif /* !defined(__ARCH_MPIPE_H__) */ diff --git a/arch/tile/include/arch/mpipe_constants.h b/arch/tile/include/arch/mpipe_constants.h new file mode 100644 index 000000000000..410a0400e055 --- /dev/null +++ b/arch/tile/include/arch/mpipe_constants.h @@ -0,0 +1,42 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + + +#ifndef __ARCH_MPIPE_CONSTANTS_H__ +#define __ARCH_MPIPE_CONSTANTS_H__ + +#define MPIPE_NUM_CLASSIFIERS 10 +#define MPIPE_CLS_MHZ 1200 + +#define MPIPE_NUM_EDMA_RINGS 32 + +#define MPIPE_NUM_SGMII_MACS 16 +#define MPIPE_NUM_XAUI_MACS 4 +#define MPIPE_NUM_LOOPBACK_CHANNELS 4 +#define MPIPE_NUM_NON_LB_CHANNELS 28 + +#define MPIPE_NUM_IPKT_BLOCKS 1536 + +#define MPIPE_NUM_BUCKETS 4160 + +#define MPIPE_NUM_NOTIF_RINGS 256 + +#define MPIPE_NUM_NOTIF_GROUPS 32 + +#define MPIPE_NUM_TLBS_PER_ASID 16 +#define MPIPE_TLB_IDX_WIDTH 4 + +#define MPIPE_MMIO_NUM_SVC_DOM 32 + +#endif /* __ARCH_MPIPE_CONSTANTS_H__ */ diff --git a/arch/tile/include/arch/mpipe_def.h b/arch/tile/include/arch/mpipe_def.h new file mode 100644 index 000000000000..c3d30217fc66 --- /dev/null +++ b/arch/tile/include/arch/mpipe_def.h @@ -0,0 +1,39 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* Machine-generated file; do not edit. */ + +#ifndef __ARCH_MPIPE_DEF_H__ +#define __ARCH_MPIPE_DEF_H__ +#define MPIPE_MMIO_ADDR__REGION_SHIFT 26 +#define MPIPE_MMIO_ADDR__REGION_VAL_CFG 0x0 +#define MPIPE_MMIO_ADDR__REGION_VAL_IDMA 0x4 +#define MPIPE_MMIO_ADDR__REGION_VAL_EDMA 0x5 +#define MPIPE_MMIO_ADDR__REGION_VAL_BSM 0x6 +#define MPIPE_BSM_REGION_VAL__VA_SHIFT 7 +#define MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_128 0x0 +#define MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_256 0x1 +#define MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_512 0x2 +#define MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_1024 0x3 +#define MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_1664 0x4 +#define MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_4096 0x5 +#define MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_10368 0x6 +#define MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_16384 0x7 +#define MPIPE_LBL_INIT_DAT_BSTS_TBL__MODE_VAL_DFA 0x0 +#define MPIPE_LBL_INIT_DAT_BSTS_TBL__MODE_VAL_FIXED 0x1 +#define MPIPE_LBL_INIT_DAT_BSTS_TBL__MODE_VAL_ALWAYS_PICK 0x2 +#define MPIPE_LBL_INIT_DAT_BSTS_TBL__MODE_VAL_STICKY 0x3 +#define MPIPE_LBL_INIT_DAT_BSTS_TBL__MODE_VAL_STICKY_RAND 0x7 +#define MPIPE_LBL_NR_STATE__FIRST_WORD 0x2138 +#endif /* !defined(__ARCH_MPIPE_DEF_H__) */ diff --git a/arch/tile/include/arch/mpipe_shm.h b/arch/tile/include/arch/mpipe_shm.h new file mode 100644 index 000000000000..f2e9e122818d --- /dev/null +++ b/arch/tile/include/arch/mpipe_shm.h @@ -0,0 +1,509 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* Machine-generated file; do not edit. */ + + +#ifndef __ARCH_MPIPE_SHM_H__ +#define __ARCH_MPIPE_SHM_H__ + +#include +#include + +#ifndef __ASSEMBLER__ +/** + * MPIPE eDMA Descriptor. + * The eDMA descriptor is written by software and consumed by hardware. It + * is used to specify the location of egress packet data to be sent out of + * the chip via one of the packet interfaces. + */ + +__extension__ +typedef union +{ + struct + { + /* Word 0 */ + +#ifndef __BIG_ENDIAN__ + /** + * Generation number. Used to indicate a valid descriptor in ring. When + * a new descriptor is written into the ring, software must toggle this + * bit. The net effect is that the GEN bit being written into new + * descriptors toggles each time the ring tail pointer wraps. + */ + uint_reg_t gen : 1; + /** Reserved. Must be zero. */ + uint_reg_t r0 : 7; + /** Checksum generation enabled for this transfer. */ + uint_reg_t csum : 1; + /** + * Nothing to be sent. Used, for example, when software has dropped a + * packet but still wishes to return all of the associated buffers. + */ + uint_reg_t ns : 1; + /** + * Notification interrupt will be delivered when packet has been egressed. + */ + uint_reg_t notif : 1; + /** + * Boundary indicator. When 1, this transfer includes the EOP for this + * command. Must be clear on all but the last descriptor for an egress + * packet. + */ + uint_reg_t bound : 1; + /** Reserved. Must be zero. */ + uint_reg_t r1 : 4; + /** + * Number of bytes to be sent for this descriptor. When zero, no data + * will be moved and the buffer descriptor will be ignored. If the + * buffer descriptor indicates that it is chained, the low 7 bits of the + * VA indicate the offset within the first buffer (e.g. 127 bytes is the + * maximum offset into the first buffer). If the size exceeds a single + * buffer, subsequent buffer descriptors will be fetched prior to + * processing the next eDMA descriptor in the ring. + */ + uint_reg_t xfer_size : 14; + /** Reserved. Must be zero. */ + uint_reg_t r2 : 2; + /** + * Destination of checksum relative to CSUM_START relative to the first + * byte moved by this descriptor. Must be zero if CSUM=0 in this + * descriptor. Must be less than XFER_SIZE (e.g. the first byte of the + * CSUM_DEST must be within the span of this descriptor). + */ + uint_reg_t csum_dest : 8; + /** + * Start byte of checksum relative to the first byte moved by this + * descriptor. If this is not the first descriptor for the egress + * packet, CSUM_START is still relative to the first byte in this + * descriptor. Must be zero if CSUM=0 in this descriptor. + */ + uint_reg_t csum_start : 8; + /** + * Initial value for 16-bit 1's compliment checksum if enabled via CSUM. + * Specified in network order. That is, bits[7:0] will be added to the + * byte pointed to by CSUM_START and bits[15:8] will be added to the byte + * pointed to by CSUM_START+1 (with appropriate 1's compliment carries). + * Must be zero if CSUM=0 in this descriptor. + */ + uint_reg_t csum_seed : 16; +#else /* __BIG_ENDIAN__ */ + uint_reg_t csum_seed : 16; + uint_reg_t csum_start : 8; + uint_reg_t csum_dest : 8; + uint_reg_t r2 : 2; + uint_reg_t xfer_size : 14; + uint_reg_t r1 : 4; + uint_reg_t bound : 1; + uint_reg_t notif : 1; + uint_reg_t ns : 1; + uint_reg_t csum : 1; + uint_reg_t r0 : 7; + uint_reg_t gen : 1; +#endif + + /* Word 1 */ + +#ifndef __BIG_ENDIAN__ + /** Virtual address. Must be sign extended by consumer. */ + int_reg_t va : 42; + /** Reserved. */ + uint_reg_t __reserved_0 : 6; + /** Index of the buffer stack to which this buffer belongs. */ + uint_reg_t stack_idx : 5; + /** Reserved. */ + uint_reg_t __reserved_1 : 3; + /** + * Instance ID. For devices that support more than one mPIPE instance, + * this field indicates the buffer owner. If the INST field does not + * match the mPIPE's instance number when a packet is egressed, buffers + * with HWB set will be returned to the other mPIPE instance. + */ + uint_reg_t inst : 1; + /** Reserved. */ + uint_reg_t __reserved_2 : 1; + /** + * Always set to one by hardware in iDMA packet descriptors. For eDMA, + * indicates whether the buffer will be released to the buffer stack + * manager. When 0, software is responsible for releasing the buffer. + */ + uint_reg_t hwb : 1; + /** + * Encoded size of buffer. Set by the ingress hardware for iDMA packet + * descriptors. For eDMA descriptors, indicates the buffer size if .c + * indicates a chained packet. If an eDMA descriptor is not chained and + * the .hwb bit is not set, this field is ignored and the size is + * specified by the .xfer_size field. + * 0 = 128 bytes + * 1 = 256 bytes + * 2 = 512 bytes + * 3 = 1024 bytes + * 4 = 1664 bytes + * 5 = 4096 bytes + * 6 = 10368 bytes + * 7 = 16384 bytes + */ + uint_reg_t size : 3; + /** + * Chaining configuration for the buffer. Indicates that an ingress + * packet or egress command is chained across multiple buffers, with each + * buffer's size indicated by the .size field. + */ + uint_reg_t c : 2; +#else /* __BIG_ENDIAN__ */ + uint_reg_t c : 2; + uint_reg_t size : 3; + uint_reg_t hwb : 1; + uint_reg_t __reserved_2 : 1; + uint_reg_t inst : 1; + uint_reg_t __reserved_1 : 3; + uint_reg_t stack_idx : 5; + uint_reg_t __reserved_0 : 6; + int_reg_t va : 42; +#endif + + }; + + /** Word access */ + uint_reg_t words[2]; +} MPIPE_EDMA_DESC_t; + +/** + * MPIPE Packet Descriptor. + * The packet descriptor is filled by the mPIPE's classification, + * load-balancing, and buffer management services. Some fields are consumed + * by mPIPE hardware, and others are consumed by Tile software. + */ + +__extension__ +typedef union +{ + struct + { + /* Word 0 */ + +#ifndef __BIG_ENDIAN__ + /** + * Notification ring into which this packet descriptor is written. + * Typically written by load balancer, but can be overridden by + * classification program if NR is asserted. + */ + uint_reg_t notif_ring : 8; + /** Source channel for this packet. Written by mPIPE DMA hardware. */ + uint_reg_t channel : 5; + /** Reserved. */ + uint_reg_t __reserved_0 : 1; + /** + * MAC Error. + * Generated by the MAC interface. Asserted if there was an overrun of + * the MAC's receive FIFO. This condition generally only occurs if the + * mPIPE clock is running too slowly. + */ + uint_reg_t me : 1; + /** + * Truncation Error. + * Written by the iDMA hardware. Asserted if packet was truncated due to + * insufficient space in iPkt buffer + */ + uint_reg_t tr : 1; + /** + * Written by the iDMA hardware. Indicates the number of bytes written + * to Tile memory. In general, this is the actual size of the packet as + * received from the MAC. But if the packet is truncated due to running + * out of buffers or due to the iPkt buffer filling up, then the L2_SIZE + * will be reduced to reflect the actual number of valid bytes written to + * Tile memory. + */ + uint_reg_t l2_size : 14; + /** + * CRC Error. + * Generated by the MAC. Asserted if MAC indicated an L2 CRC error or + * other L2 error (bad length etc.) on the packet. + */ + uint_reg_t ce : 1; + /** + * Cut Through. + * Written by the iDMA hardware. Asserted if packet was not completely + * received before being sent to classifier. L2_Size will indicate + * number of bytes received so far. + */ + uint_reg_t ct : 1; + /** + * Written by the classification program. Used by the load balancer to + * select the ring into which this packet descriptor is written. + */ + uint_reg_t bucket_id : 13; + /** Reserved. */ + uint_reg_t __reserved_1 : 3; + /** + * Checksum. + * Written by classification program. When 1, the checksum engine will + * perform checksum based on the CSUM_SEED, CSUM_START, and CSUM_BYTES + * fields. The result will be placed in CSUM_VAL. + */ + uint_reg_t cs : 1; + /** + * Notification Ring Select. + * Written by the classification program. When 1, the NotifRingIDX is + * set by classification program rather than being set by load balancer. + */ + uint_reg_t nr : 1; + /** + * Written by classification program. Indicates whether packet and + * descriptor should both be dropped, both be delivered, or only the + * descriptor should be delivered. + */ + uint_reg_t dest : 2; + /** + * General Purpose Sequence Number Enable. + * Written by the classification program. When 1, the GP_SQN_SEL field + * contains the sequence number selector and the GP_SQN field will be + * replaced with the associated sequence number. When clear, the GP_SQN + * field is left intact and be used as "Custom" bytes. + */ + uint_reg_t sq : 1; + /** + * TimeStamp Enable. + * Enable TimeStamp insertion. When clear, timestamp field may be filled + * with custom data by classifier. When set, hardware inserts the + * timestamp when the start of packet is received from the MAC. + */ + uint_reg_t ts : 1; + /** + * Packet Sequence Number Enable. + * Enable PacketSQN insertion. When clear, PacketSQN field may be filled + * with custom data by classifier. When set, hardware inserts the packet + * sequence number when the packet descriptor is written to a + * notification ring. + */ + uint_reg_t ps : 1; + /** + * Buffer Error. + * Written by the iDMA hardware. Asserted if iDMA ran out of buffers + * while writing the packet. Software must still return any buffer + * descriptors whose C field indicates a valid descriptor was consumed. + */ + uint_reg_t be : 1; + /** + * Written by the classification program. The associated counter is + * incremented when the packet is sent. + */ + uint_reg_t ctr0 : 5; + /** Reserved. */ + uint_reg_t __reserved_2 : 3; +#else /* __BIG_ENDIAN__ */ + uint_reg_t __reserved_2 : 3; + uint_reg_t ctr0 : 5; + uint_reg_t be : 1; + uint_reg_t ps : 1; + uint_reg_t ts : 1; + uint_reg_t sq : 1; + uint_reg_t dest : 2; + uint_reg_t nr : 1; + uint_reg_t cs : 1; + uint_reg_t __reserved_1 : 3; + uint_reg_t bucket_id : 13; + uint_reg_t ct : 1; + uint_reg_t ce : 1; + uint_reg_t l2_size : 14; + uint_reg_t tr : 1; + uint_reg_t me : 1; + uint_reg_t __reserved_0 : 1; + uint_reg_t channel : 5; + uint_reg_t notif_ring : 8; +#endif + + /* Word 1 */ + +#ifndef __BIG_ENDIAN__ + /** + * Written by the classification program. The associated counter is + * incremented when the packet is sent. + */ + uint_reg_t ctr1 : 5; + /** Reserved. */ + uint_reg_t __reserved_3 : 3; + /** + * Written by classification program. Indicates the start byte for + * checksum. Relative to 1st byte received from MAC. + */ + uint_reg_t csum_start : 8; + /** + * Checksum seed written by classification program. Overwritten with + * resultant checksum if CS bit is asserted. The endianness of the CSUM + * value bits when viewed by Tile software match the packet byte order. + * That is, bits[7:0] of the resulting checksum value correspond to + * earlier (more significant) bytes in the packet. To avoid classifier + * software from having to byte swap the CSUM_SEED, the iDMA checksum + * engine byte swaps the classifier's result before seeding the checksum + * calculation. Thus, the CSUM_START byte of packet data is added to + * bits[15:8] of the CSUM_SEED field generated by the classifier. This + * byte swap will be visible to Tile software if the CS bit is clear. + */ + uint_reg_t csum_seed_val : 16; + /** + * Written by the classification program. Not interpreted by mPIPE + * hardware. + */ + uint_reg_t custom0 : 32; +#else /* __BIG_ENDIAN__ */ + uint_reg_t custom0 : 32; + uint_reg_t csum_seed_val : 16; + uint_reg_t csum_start : 8; + uint_reg_t __reserved_3 : 3; + uint_reg_t ctr1 : 5; +#endif + + /* Word 2 */ + +#ifndef __BIG_ENDIAN__ + /** + * Written by the classification program. Not interpreted by mPIPE + * hardware. + */ + uint_reg_t custom1 : 64; +#else /* __BIG_ENDIAN__ */ + uint_reg_t custom1 : 64; +#endif + + /* Word 3 */ + +#ifndef __BIG_ENDIAN__ + /** + * Written by the classification program. Not interpreted by mPIPE + * hardware. + */ + uint_reg_t custom2 : 64; +#else /* __BIG_ENDIAN__ */ + uint_reg_t custom2 : 64; +#endif + + /* Word 4 */ + +#ifndef __BIG_ENDIAN__ + /** + * Written by the classification program. Not interpreted by mPIPE + * hardware. + */ + uint_reg_t custom3 : 64; +#else /* __BIG_ENDIAN__ */ + uint_reg_t custom3 : 64; +#endif + + /* Word 5 */ + +#ifndef __BIG_ENDIAN__ + /** + * Sequence number applied when packet is distributed. Classifier + * selects which sequence number is to be applied by writing the 13-bit + * SQN-selector into this field. + */ + uint_reg_t gp_sqn : 16; + /** + * Written by notification hardware. The packet sequence number is + * incremented for each packet that wasn't dropped. + */ + uint_reg_t packet_sqn : 48; +#else /* __BIG_ENDIAN__ */ + uint_reg_t packet_sqn : 48; + uint_reg_t gp_sqn : 16; +#endif + + /* Word 6 */ + +#ifndef __BIG_ENDIAN__ + /** + * Written by hardware when the start-of-packet is received by the mPIPE + * from the MAC. This is the nanoseconds part of the packet timestamp. + */ + uint_reg_t time_stamp_ns : 32; + /** + * Written by hardware when the start-of-packet is received by the mPIPE + * from the MAC. This is the seconds part of the packet timestamp. + */ + uint_reg_t time_stamp_sec : 32; +#else /* __BIG_ENDIAN__ */ + uint_reg_t time_stamp_sec : 32; + uint_reg_t time_stamp_ns : 32; +#endif + + /* Word 7 */ + +#ifndef __BIG_ENDIAN__ + /** Virtual address. Must be sign extended by consumer. */ + int_reg_t va : 42; + /** Reserved. */ + uint_reg_t __reserved_4 : 6; + /** Index of the buffer stack to which this buffer belongs. */ + uint_reg_t stack_idx : 5; + /** Reserved. */ + uint_reg_t __reserved_5 : 3; + /** + * Instance ID. For devices that support more than one mPIPE instance, + * this field indicates the buffer owner. If the INST field does not + * match the mPIPE's instance number when a packet is egressed, buffers + * with HWB set will be returned to the other mPIPE instance. + */ + uint_reg_t inst : 1; + /** Reserved. */ + uint_reg_t __reserved_6 : 1; + /** + * Always set to one by hardware in iDMA packet descriptors. For eDMA, + * indicates whether the buffer will be released to the buffer stack + * manager. When 0, software is responsible for releasing the buffer. + */ + uint_reg_t hwb : 1; + /** + * Encoded size of buffer. Set by the ingress hardware for iDMA packet + * descriptors. For eDMA descriptors, indicates the buffer size if .c + * indicates a chained packet. If an eDMA descriptor is not chained and + * the .hwb bit is not set, this field is ignored and the size is + * specified by the .xfer_size field. + * 0 = 128 bytes + * 1 = 256 bytes + * 2 = 512 bytes + * 3 = 1024 bytes + * 4 = 1664 bytes + * 5 = 4096 bytes + * 6 = 10368 bytes + * 7 = 16384 bytes + */ + uint_reg_t size : 3; + /** + * Chaining configuration for the buffer. Indicates that an ingress + * packet or egress command is chained across multiple buffers, with each + * buffer's size indicated by the .size field. + */ + uint_reg_t c : 2; +#else /* __BIG_ENDIAN__ */ + uint_reg_t c : 2; + uint_reg_t size : 3; + uint_reg_t hwb : 1; + uint_reg_t __reserved_6 : 1; + uint_reg_t inst : 1; + uint_reg_t __reserved_5 : 3; + uint_reg_t stack_idx : 5; + uint_reg_t __reserved_4 : 6; + int_reg_t va : 42; +#endif + + }; + + /** Word access */ + uint_reg_t words[8]; +} MPIPE_PDESC_t; +#endif /* !defined(__ASSEMBLER__) */ + +#endif /* !defined(__ARCH_MPIPE_SHM_H__) */ diff --git a/arch/tile/include/arch/mpipe_shm_def.h b/arch/tile/include/arch/mpipe_shm_def.h new file mode 100644 index 000000000000..6124d39c8318 --- /dev/null +++ b/arch/tile/include/arch/mpipe_shm_def.h @@ -0,0 +1,23 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* Machine-generated file; do not edit. */ + +#ifndef __ARCH_MPIPE_SHM_DEF_H__ +#define __ARCH_MPIPE_SHM_DEF_H__ +#define MPIPE_EDMA_DESC_WORD1__C_VAL_UNCHAINED 0x0 +#define MPIPE_EDMA_DESC_WORD1__C_VAL_CHAINED 0x1 +#define MPIPE_EDMA_DESC_WORD1__C_VAL_NOT_RDY 0x2 +#define MPIPE_EDMA_DESC_WORD1__C_VAL_INVALID 0x3 +#endif /* !defined(__ARCH_MPIPE_SHM_DEF_H__) */ diff --git a/arch/tile/include/gxio/iorpc_mpipe.h b/arch/tile/include/gxio/iorpc_mpipe.h new file mode 100644 index 000000000000..9d50fce1b1a7 --- /dev/null +++ b/arch/tile/include/gxio/iorpc_mpipe.h @@ -0,0 +1,136 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* This file is machine-generated; DO NOT EDIT! */ +#ifndef __GXIO_MPIPE_LINUX_RPC_H__ +#define __GXIO_MPIPE_LINUX_RPC_H__ + +#include + +#include +#include +#include +#include +#include +#include +#include + +#define GXIO_MPIPE_OP_ALLOC_BUFFER_STACKS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1200) +#define GXIO_MPIPE_OP_INIT_BUFFER_STACK_AUX IORPC_OPCODE(IORPC_FORMAT_KERNEL_MEM, 0x1201) + +#define GXIO_MPIPE_OP_ALLOC_NOTIF_RINGS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1203) +#define GXIO_MPIPE_OP_INIT_NOTIF_RING_AUX IORPC_OPCODE(IORPC_FORMAT_KERNEL_MEM, 0x1204) +#define GXIO_MPIPE_OP_REQUEST_NOTIF_RING_INTERRUPT IORPC_OPCODE(IORPC_FORMAT_KERNEL_INTERRUPT, 0x1205) +#define GXIO_MPIPE_OP_ENABLE_NOTIF_RING_INTERRUPT IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1206) +#define GXIO_MPIPE_OP_ALLOC_NOTIF_GROUPS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1207) +#define GXIO_MPIPE_OP_INIT_NOTIF_GROUP IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1208) +#define GXIO_MPIPE_OP_ALLOC_BUCKETS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1209) +#define GXIO_MPIPE_OP_INIT_BUCKET IORPC_OPCODE(IORPC_FORMAT_NONE, 0x120a) +#define GXIO_MPIPE_OP_ALLOC_EDMA_RINGS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x120b) +#define GXIO_MPIPE_OP_INIT_EDMA_RING_AUX IORPC_OPCODE(IORPC_FORMAT_KERNEL_MEM, 0x120c) + +#define GXIO_MPIPE_OP_COMMIT_RULES IORPC_OPCODE(IORPC_FORMAT_NONE, 0x120f) +#define GXIO_MPIPE_OP_REGISTER_CLIENT_MEMORY IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1210) +#define GXIO_MPIPE_OP_LINK_OPEN_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1211) +#define GXIO_MPIPE_OP_LINK_CLOSE_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1212) + +#define GXIO_MPIPE_OP_GET_TIMESTAMP_AUX IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x121e) +#define GXIO_MPIPE_OP_SET_TIMESTAMP_AUX IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x121f) +#define GXIO_MPIPE_OP_ADJUST_TIMESTAMP_AUX IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1220) +#define GXIO_MPIPE_OP_ARM_POLLFD IORPC_OPCODE(IORPC_FORMAT_KERNEL_POLLFD, 0x9000) +#define GXIO_MPIPE_OP_CLOSE_POLLFD IORPC_OPCODE(IORPC_FORMAT_KERNEL_POLLFD, 0x9001) +#define GXIO_MPIPE_OP_GET_MMIO_BASE IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8000) +#define GXIO_MPIPE_OP_CHECK_MMIO_OFFSET IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8001) + +int gxio_mpipe_alloc_buffer_stacks(gxio_mpipe_context_t * context, + unsigned int count, unsigned int first, + unsigned int flags); + +int gxio_mpipe_init_buffer_stack_aux(gxio_mpipe_context_t * context, + void *mem_va, size_t mem_size, + unsigned int mem_flags, unsigned int stack, + unsigned int buffer_size_enum); + + +int gxio_mpipe_alloc_notif_rings(gxio_mpipe_context_t * context, + unsigned int count, unsigned int first, + unsigned int flags); + +int gxio_mpipe_init_notif_ring_aux(gxio_mpipe_context_t * context, void *mem_va, + size_t mem_size, unsigned int mem_flags, + unsigned int ring); + +int gxio_mpipe_request_notif_ring_interrupt(gxio_mpipe_context_t * context, + int inter_x, int inter_y, + int inter_ipi, int inter_event, + unsigned int ring); + +int gxio_mpipe_enable_notif_ring_interrupt(gxio_mpipe_context_t * context, + unsigned int ring); + +int gxio_mpipe_alloc_notif_groups(gxio_mpipe_context_t * context, + unsigned int count, unsigned int first, + unsigned int flags); + +int gxio_mpipe_init_notif_group(gxio_mpipe_context_t * context, + unsigned int group, + gxio_mpipe_notif_group_bits_t bits); + +int gxio_mpipe_alloc_buckets(gxio_mpipe_context_t * context, unsigned int count, + unsigned int first, unsigned int flags); + +int gxio_mpipe_init_bucket(gxio_mpipe_context_t * context, unsigned int bucket, + MPIPE_LBL_INIT_DAT_BSTS_TBL_t bucket_info); + +int gxio_mpipe_alloc_edma_rings(gxio_mpipe_context_t * context, + unsigned int count, unsigned int first, + unsigned int flags); + +int gxio_mpipe_init_edma_ring_aux(gxio_mpipe_context_t * context, void *mem_va, + size_t mem_size, unsigned int mem_flags, + unsigned int ring, unsigned int channel); + + +int gxio_mpipe_commit_rules(gxio_mpipe_context_t * context, const void *blob, + size_t blob_size); + +int gxio_mpipe_register_client_memory(gxio_mpipe_context_t * context, + unsigned int iotlb, HV_PTE pte, + unsigned int flags); + +int gxio_mpipe_link_open_aux(gxio_mpipe_context_t * context, + _gxio_mpipe_link_name_t name, unsigned int flags); + +int gxio_mpipe_link_close_aux(gxio_mpipe_context_t * context, int mac); + + +int gxio_mpipe_get_timestamp_aux(gxio_mpipe_context_t * context, uint64_t * sec, + uint64_t * nsec, uint64_t * cycles); + +int gxio_mpipe_set_timestamp_aux(gxio_mpipe_context_t * context, uint64_t sec, + uint64_t nsec, uint64_t cycles); + +int gxio_mpipe_adjust_timestamp_aux(gxio_mpipe_context_t * context, + int64_t nsec); + +int gxio_mpipe_arm_pollfd(gxio_mpipe_context_t * context, int pollfd_cookie); + +int gxio_mpipe_close_pollfd(gxio_mpipe_context_t * context, int pollfd_cookie); + +int gxio_mpipe_get_mmio_base(gxio_mpipe_context_t * context, HV_PTE *base); + +int gxio_mpipe_check_mmio_offset(gxio_mpipe_context_t * context, + unsigned long offset, unsigned long size); + +#endif /* !__GXIO_MPIPE_LINUX_RPC_H__ */ diff --git a/arch/tile/include/gxio/iorpc_mpipe_info.h b/arch/tile/include/gxio/iorpc_mpipe_info.h new file mode 100644 index 000000000000..0bcf3f71ce8b --- /dev/null +++ b/arch/tile/include/gxio/iorpc_mpipe_info.h @@ -0,0 +1,46 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* This file is machine-generated; DO NOT EDIT! */ +#ifndef __GXIO_MPIPE_INFO_LINUX_RPC_H__ +#define __GXIO_MPIPE_INFO_LINUX_RPC_H__ + +#include + +#include +#include +#include +#include +#include +#include +#include + + +#define GXIO_MPIPE_INFO_OP_ENUMERATE_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1251) +#define GXIO_MPIPE_INFO_OP_GET_MMIO_BASE IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8000) +#define GXIO_MPIPE_INFO_OP_CHECK_MMIO_OFFSET IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8001) + + +int gxio_mpipe_info_enumerate_aux(gxio_mpipe_info_context_t * context, + unsigned int idx, + _gxio_mpipe_link_name_t * name, + _gxio_mpipe_link_mac_t * mac); + +int gxio_mpipe_info_get_mmio_base(gxio_mpipe_info_context_t * context, + HV_PTE *base); + +int gxio_mpipe_info_check_mmio_offset(gxio_mpipe_info_context_t * context, + unsigned long offset, unsigned long size); + +#endif /* !__GXIO_MPIPE_INFO_LINUX_RPC_H__ */ diff --git a/arch/tile/include/gxio/mpipe.h b/arch/tile/include/gxio/mpipe.h new file mode 100644 index 000000000000..78c598618c97 --- /dev/null +++ b/arch/tile/include/gxio/mpipe.h @@ -0,0 +1,1736 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#ifndef _GXIO_MPIPE_H_ +#define _GXIO_MPIPE_H_ + +/* + * + * An API for allocating, configuring, and manipulating mPIPE hardware + * resources. + */ + +#include "common.h" +#include "dma_queue.h" + +#include + +#include +#include + +#include +#include + +/* + * + * The TILE-Gx mPIPE&tm; shim provides Ethernet connectivity, packet + * classification, and packet load balancing services. The + * gxio_mpipe_ API, declared in , allows applications to + * allocate mPIPE IO channels, configure packet distribution + * parameters, and send and receive Ethernet packets. The API is + * designed to be a minimal wrapper around the mPIPE hardware, making + * system calls only where necessary to preserve inter-process + * protection guarantees. + * + * The APIs described below allow the programmer to allocate and + * configure mPIPE resources. As described below, the mPIPE is a + * single shared hardware device that provides partitionable resources + * that are shared between all applications in the system. The + * gxio_mpipe_ API allows userspace code to make resource request + * calls to the hypervisor, which in turns keeps track of the + * resources in use by all applications, maintains protection + * guarantees, and resets resources upon application shutdown. + * + * We strongly recommend reading the mPIPE section of the IO Device + * Guide (UG404) before working with this API. Most functions in the + * gxio_mpipe_ API are directly analogous to hardware interfaces and + * the documentation assumes that the reader understands those + * hardware interfaces. + * + * @section mpipe__ingress mPIPE Ingress Hardware Resources + * + * The mPIPE ingress hardware provides extensive hardware offload for + * tasks like packet header parsing, load balancing, and memory + * management. This section provides a brief introduction to the + * hardware components and the gxio_mpipe_ calls used to manage them; + * see the IO Device Guide for a much more detailed description of the + * mPIPE's capabilities. + * + * When a packet arrives at one of the mPIPE's Ethernet MACs, it is + * assigned a channel number indicating which MAC received it. It + * then proceeds through the following hardware pipeline: + * + * @subsection mpipe__classification Classification + * + * A set of classification processors run header parsing code on each + * incoming packet, extracting information including the destination + * MAC address, VLAN, Ethernet type, and five-tuple hash. Some of + * this information is then used to choose which buffer stack will be + * used to hold the packet, and which bucket will be used by the load + * balancer to determine which application will receive the packet. + * + * The rules by which the buffer stack and bucket are chosen can be + * configured via the @ref gxio_mpipe_classifier API. A given app can + * specify multiple rules, each one specifying a bucket range, and a + * set of buffer stacks, to be used for packets matching the rule. + * Each rule can optionally specify a restricted set of channels, + * VLANs, and/or dMACs, in which it is interested. By default, a + * given rule starts out matching all channels associated with the + * mPIPE context's set of open links; all VLANs; and all dMACs. + * Subsequent restrictions can then be added. + * + * @subsection mpipe__load_balancing Load Balancing + * + * The mPIPE load balancer is responsible for choosing the NotifRing + * to which the packet will be delivered. This decision is based on + * the bucket number indicated by the classification program. In + * general, the bucket number is based on some number of low bits of + * the packet's flow hash (applications that aren't interested in flow + * hashing use a single bucket). Each load balancer bucket keeps a + * record of the NotifRing to which packets directed to that bucket + * are currently being delivered. Based on the bucket's load + * balancing mode (@ref gxio_mpipe_bucket_mode_t), the load balancer + * either forwards the packet to the previously assigned NotifRing or + * decides to choose a new NotifRing. If a new NotifRing is required, + * the load balancer chooses the least loaded ring in the NotifGroup + * associated with the bucket. + * + * The load balancer is a shared resource. Each application needs to + * explicitly allocate NotifRings, NotifGroups, and buckets, using + * gxio_mpipe_alloc_notif_rings(), gxio_mpipe_alloc_notif_groups(), + * and gxio_mpipe_alloc_buckets(). Then the application needs to + * configure them using gxio_mpipe_init_notif_ring() and + * gxio_mpipe_init_notif_group_and_buckets(). + * + * @subsection mpipe__buffers Buffer Selection and Packet Delivery + * + * Once the load balancer has chosen the destination NotifRing, the + * mPIPE DMA engine pops at least one buffer off of the 'buffer stack' + * chosen by the classification program and DMAs the packet data into + * that buffer. Each buffer stack provides a hardware-accelerated + * stack of data buffers with the same size. If the packet data is + * larger than the buffers provided by the chosen buffer stack, the + * mPIPE hardware pops off multiple buffers and chains the packet data + * through a multi-buffer linked list. Once the packet data is + * delivered to the buffer(s), the mPIPE hardware writes the + * ::gxio_mpipe_idesc_t metadata object (calculated by the classifier) + * into the NotifRing and increments the number of packets delivered + * to that ring. + * + * Applications can push buffers onto a buffer stack by calling + * gxio_mpipe_push_buffer() or by egressing a packet with the + * ::gxio_mpipe_edesc_t::hwb bit set, indicating that the egressed + * buffers should be returned to the stack. + * + * Applications can allocate and initialize buffer stacks with the + * gxio_mpipe_alloc_buffer_stacks() and gxio_mpipe_init_buffer_stack() + * APIs. + * + * The application must also register the memory pages that will hold + * packets. This requires calling gxio_mpipe_register_page() for each + * memory page that will hold packets allocated by the application for + * a given buffer stack. Since each buffer stack is limited to 16 + * registered pages, it may be necessary to use huge pages, or even + * extremely huge pages, to hold all the buffers. + * + * @subsection mpipe__iqueue NotifRings + * + * Each NotifRing is a region of shared memory, allocated by the + * application, to which the mPIPE delivers packet descriptors + * (::gxio_mpipe_idesc_t). The application can allocate them via + * gxio_mpipe_alloc_notif_rings(). The application can then either + * explicitly initialize them with gxio_mpipe_init_notif_ring() and + * then read from them manually, or can make use of the convenience + * wrappers provided by @ref gxio_mpipe_wrappers. + * + * @section mpipe__egress mPIPE Egress Hardware + * + * Applications use eDMA rings to queue packets for egress. The + * application can allocate them via gxio_mpipe_alloc_edma_rings(). + * The application can then either explicitly initialize them with + * gxio_mpipe_init_edma_ring() and then write to them manually, or + * can make use of the convenience wrappers provided by + * @ref gxio_mpipe_wrappers. + * + * @section gxio__shortcomings Plans for Future API Revisions + * + * The API defined here is only an initial version of the mPIPE API. + * Future plans include: + * + * - Higher level wrapper functions to provide common initialization + * patterns. This should help users start writing mPIPE programs + * without having to learn the details of the hardware. + * + * - Support for reset and deallocation of resources, including + * cleanup upon application shutdown. + * + * - Support for calling these APIs in the BME. + * + * - Support for IO interrupts. + * + * - Clearer definitions of thread safety guarantees. + * + * @section gxio__mpipe_examples Examples + * + * See the following mPIPE example programs for more information about + * allocating mPIPE resources and using them in real applications: + * + * - @ref mpipe/ingress/app.c : Receiving packets. + * + * - @ref mpipe/forward/app.c : Forwarding packets. + * + * Note that there are several more examples. + */ + +/* Flags that can be passed to resource allocation functions. */ +enum gxio_mpipe_alloc_flags_e { + /* Require an allocation to start at a specified resource index. */ + GXIO_MPIPE_ALLOC_FIXED = HV_MPIPE_ALLOC_FIXED, +}; + +/* Flags that can be passed to memory registration functions. */ +enum gxio_mpipe_mem_flags_e { + /* Do not fill L3 when writing, and invalidate lines upon egress. */ + GXIO_MPIPE_MEM_FLAG_NT_HINT = IORPC_MEM_BUFFER_FLAG_NT_HINT, + + /* L3 cache fills should only populate IO cache ways. */ + GXIO_MPIPE_MEM_FLAG_IO_PIN = IORPC_MEM_BUFFER_FLAG_IO_PIN, +}; + +/* An ingress packet descriptor. When a packet arrives, the mPIPE + * hardware generates this structure and writes it into a NotifRing. + */ +typedef MPIPE_PDESC_t gxio_mpipe_idesc_t; + +/* An egress command descriptor. Applications write this structure + * into eDMA rings and the hardware performs the indicated operation + * (normally involving egressing some bytes). Note that egressing a + * single packet may involve multiple egress command descriptors. + */ +typedef MPIPE_EDMA_DESC_t gxio_mpipe_edesc_t; + +/* Get the "va" field from an "idesc". + * + * This is the address at which the ingress hardware copied the first + * byte of the packet. + * + * If the classifier detected a custom header, then this will point to + * the custom header, and gxio_mpipe_idesc_get_l2_start() will point + * to the actual L2 header. + * + * Note that this value may be misleading if "idesc->be" is set. + * + * @param idesc An ingress packet descriptor. + */ +static inline unsigned char *gxio_mpipe_idesc_get_va(gxio_mpipe_idesc_t *idesc) +{ + return (unsigned char *)(long)idesc->va; +} + +/* Get the "xfer_size" from an "idesc". + * + * This is the actual number of packet bytes transferred into memory + * by the hardware. + * + * Note that this value may be misleading if "idesc->be" is set. + * + * @param idesc An ingress packet descriptor. + * + * ISSUE: Is this the best name for this? + * FIXME: Add more docs about chaining, clipping, etc. + */ +static inline unsigned int gxio_mpipe_idesc_get_xfer_size(gxio_mpipe_idesc_t + *idesc) +{ + return idesc->l2_size; +} + +/* Get the "l2_offset" from an "idesc". + * + * Extremely customized classifiers might not support this function. + * + * This is the number of bytes between the "va" and the L2 header. + * + * The L2 header consists of a destination mac address, a source mac + * address, and an initial ethertype. Various initial ethertypes + * allow encoding extra information in the L2 header, often including + * a vlan, and/or a new ethertype. + * + * Note that the "l2_offset" will be non-zero if (and only if) the + * classifier processed a custom header for the packet. + * + * @param idesc An ingress packet descriptor. + */ +static inline uint8_t gxio_mpipe_idesc_get_l2_offset(gxio_mpipe_idesc_t *idesc) +{ + return (idesc->custom1 >> 32) & 0xFF; +} + +/* Get the "l2_start" from an "idesc". + * + * This is simply gxio_mpipe_idesc_get_va() plus + * gxio_mpipe_idesc_get_l2_offset(). + * + * @param idesc An ingress packet descriptor. + */ +static inline unsigned char *gxio_mpipe_idesc_get_l2_start(gxio_mpipe_idesc_t + *idesc) +{ + unsigned char *va = gxio_mpipe_idesc_get_va(idesc); + return va + gxio_mpipe_idesc_get_l2_offset(idesc); +} + +/* Get the "l2_length" from an "idesc". + * + * This is simply gxio_mpipe_idesc_get_xfer_size() minus + * gxio_mpipe_idesc_get_l2_offset(). + * + * @param idesc An ingress packet descriptor. + */ +static inline unsigned int gxio_mpipe_idesc_get_l2_length(gxio_mpipe_idesc_t + *idesc) +{ + unsigned int xfer_size = idesc->l2_size; + return xfer_size - gxio_mpipe_idesc_get_l2_offset(idesc); +} + +/* A context object used to manage mPIPE hardware resources. */ +typedef struct { + + /* File descriptor for calling up to Linux (and thus the HV). */ + int fd; + + /* The VA at which configuration registers are mapped. */ + char *mmio_cfg_base; + + /* The VA at which IDMA, EDMA, and buffer manager are mapped. */ + char *mmio_fast_base; + + /* The "initialized" buffer stacks. */ + gxio_mpipe_rules_stacks_t __stacks; + +} gxio_mpipe_context_t; + +/* This is only used internally, but it's most easily made visible here. */ +typedef gxio_mpipe_context_t gxio_mpipe_info_context_t; + +/* Initialize an mPIPE context. + * + * This function allocates an mPIPE "service domain" and maps the MMIO + * registers into the caller's VA space. + * + * @param context Context object to be initialized. + * @param mpipe_instance Instance number of mPIPE shim to be controlled via + * context. + */ +extern int gxio_mpipe_init(gxio_mpipe_context_t *context, + unsigned int mpipe_instance); + +/* Destroy an mPIPE context. + * + * This function frees the mPIPE "service domain" and unmaps the MMIO + * registers from the caller's VA space. + * + * If a user process exits without calling this routine, the kernel + * will destroy the mPIPE context as part of process teardown. + * + * @param context Context object to be destroyed. + */ +extern int gxio_mpipe_destroy(gxio_mpipe_context_t *context); + +/***************************************************************** + * Buffer Stacks * + ******************************************************************/ + +/* Allocate a set of buffer stacks. + * + * The return value is NOT interesting if count is zero. + * + * @param context An initialized mPIPE context. + * @param count Number of stacks required. + * @param first Index of first stack if ::GXIO_MPIPE_ALLOC_FIXED flag is set, + * otherwise ignored. + * @param flags Flag bits from ::gxio_mpipe_alloc_flags_e. + * @return Index of first allocated buffer stack, or + * ::GXIO_MPIPE_ERR_NO_BUFFER_STACK if allocation failed. + */ +extern int gxio_mpipe_alloc_buffer_stacks(gxio_mpipe_context_t *context, + unsigned int count, + unsigned int first, + unsigned int flags); + +/* Enum codes for buffer sizes supported by mPIPE. */ +typedef enum { + /* 128 byte packet data buffer. */ + GXIO_MPIPE_BUFFER_SIZE_128 = MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_128, + /* 256 byte packet data buffer. */ + GXIO_MPIPE_BUFFER_SIZE_256 = MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_256, + /* 512 byte packet data buffer. */ + GXIO_MPIPE_BUFFER_SIZE_512 = MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_512, + /* 1024 byte packet data buffer. */ + GXIO_MPIPE_BUFFER_SIZE_1024 = MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_1024, + /* 1664 byte packet data buffer. */ + GXIO_MPIPE_BUFFER_SIZE_1664 = MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_1664, + /* 4096 byte packet data buffer. */ + GXIO_MPIPE_BUFFER_SIZE_4096 = MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_4096, + /* 10368 byte packet data buffer. */ + GXIO_MPIPE_BUFFER_SIZE_10368 = + MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_10368, + /* 16384 byte packet data buffer. */ + GXIO_MPIPE_BUFFER_SIZE_16384 = MPIPE_BSM_INIT_DAT_1__SIZE_VAL_BSZ_16384 +} gxio_mpipe_buffer_size_enum_t; + +/* Convert a buffer size in bytes into a buffer size enum. */ +extern gxio_mpipe_buffer_size_enum_t +gxio_mpipe_buffer_size_to_buffer_size_enum(size_t size); + +/* Convert a buffer size enum into a buffer size in bytes. */ +extern size_t +gxio_mpipe_buffer_size_enum_to_buffer_size(gxio_mpipe_buffer_size_enum_t + buffer_size_enum); + +/* Calculate the number of bytes required to store a given number of + * buffers in the memory registered with a buffer stack via + * gxio_mpipe_init_buffer_stack(). + */ +extern size_t gxio_mpipe_calc_buffer_stack_bytes(unsigned long buffers); + +/* Initialize a buffer stack. This function binds a region of memory + * to be used by the hardware for storing buffer addresses pushed via + * gxio_mpipe_push_buffer() or as the result of sending a buffer out + * the egress with the 'push to stack when done' bit set. Once this + * function returns, the memory region's contents may be arbitrarily + * modified by the hardware at any time and software should not access + * the memory region again. + * + * @param context An initialized mPIPE context. + * @param stack The buffer stack index. + * @param buffer_size_enum The size of each buffer in the buffer stack, + * as an enum. + * @param mem The address of the buffer stack. This memory must be + * physically contiguous and aligned to a 64kB boundary. + * @param mem_size The size of the buffer stack, in bytes. + * @param mem_flags ::gxio_mpipe_mem_flags_e memory flags. + * @return Zero on success, ::GXIO_MPIPE_ERR_INVAL_BUFFER_SIZE if + * buffer_size_enum is invalid, ::GXIO_MPIPE_ERR_BAD_BUFFER_STACK if + * stack has not been allocated. + */ +extern int gxio_mpipe_init_buffer_stack(gxio_mpipe_context_t *context, + unsigned int stack, + gxio_mpipe_buffer_size_enum_t + buffer_size_enum, void *mem, + size_t mem_size, + unsigned int mem_flags); + +/* Push a buffer onto a previously initialized buffer stack. + * + * The size of the buffer being pushed must match the size that was + * registered with gxio_mpipe_init_buffer_stack(). All packet buffer + * addresses are 128-byte aligned; the low 7 bits of the specified + * buffer address will be ignored. + * + * @param context An initialized mPIPE context. + * @param stack The buffer stack index. + * @param buffer The buffer (the low seven bits are ignored). + */ +static inline void gxio_mpipe_push_buffer(gxio_mpipe_context_t *context, + unsigned int stack, void *buffer) +{ + MPIPE_BSM_REGION_ADDR_t offset = { {0} }; + MPIPE_BSM_REGION_VAL_t val = { {0} }; + + /* + * The mmio_fast_base region starts at the IDMA region, so subtract + * off that initial offset. + */ + offset.region = + MPIPE_MMIO_ADDR__REGION_VAL_BSM - + MPIPE_MMIO_ADDR__REGION_VAL_IDMA; + offset.stack = stack; + +#if __SIZEOF_POINTER__ == 4 + val.va = ((ulong) buffer) >> MPIPE_BSM_REGION_VAL__VA_SHIFT; +#else + val.va = ((long)buffer) >> MPIPE_BSM_REGION_VAL__VA_SHIFT; +#endif + + __gxio_mmio_write(context->mmio_fast_base + offset.word, val.word); +} + +/* Pop a buffer off of a previously initialized buffer stack. + * + * @param context An initialized mPIPE context. + * @param stack The buffer stack index. + * @return The buffer, or NULL if the stack is empty. + */ +static inline void *gxio_mpipe_pop_buffer(gxio_mpipe_context_t *context, + unsigned int stack) +{ + MPIPE_BSM_REGION_ADDR_t offset = { {0} }; + + /* + * The mmio_fast_base region starts at the IDMA region, so subtract + * off that initial offset. + */ + offset.region = + MPIPE_MMIO_ADDR__REGION_VAL_BSM - + MPIPE_MMIO_ADDR__REGION_VAL_IDMA; + offset.stack = stack; + + while (1) { + /* + * Case 1: val.c == ..._UNCHAINED, va is non-zero. + * Case 2: val.c == ..._INVALID, va is zero. + * Case 3: val.c == ..._NOT_RDY, va is zero. + */ + MPIPE_BSM_REGION_VAL_t val; + val.word = + __gxio_mmio_read(context->mmio_fast_base + + offset.word); + + /* + * Handle case 1 and 2 by returning the buffer (or NULL). + * Handle case 3 by waiting for the prefetch buffer to refill. + */ + if (val.c != MPIPE_EDMA_DESC_WORD1__C_VAL_NOT_RDY) + return (void *)((unsigned long)val. + va << MPIPE_BSM_REGION_VAL__VA_SHIFT); + } +} + +/***************************************************************** + * NotifRings * + ******************************************************************/ + +/* Allocate a set of NotifRings. + * + * The return value is NOT interesting if count is zero. + * + * Note that NotifRings are allocated in chunks, so allocating one at + * a time is much less efficient than allocating several at once. + * + * @param context An initialized mPIPE context. + * @param count Number of NotifRings required. + * @param first Index of first NotifRing if ::GXIO_MPIPE_ALLOC_FIXED flag + * is set, otherwise ignored. + * @param flags Flag bits from ::gxio_mpipe_alloc_flags_e. + * @return Index of first allocated buffer NotifRing, or + * ::GXIO_MPIPE_ERR_NO_NOTIF_RING if allocation failed. + */ +extern int gxio_mpipe_alloc_notif_rings(gxio_mpipe_context_t *context, + unsigned int count, unsigned int first, + unsigned int flags); + +/* Initialize a NotifRing, using the given memory and size. + * + * @param context An initialized mPIPE context. + * @param ring The NotifRing index. + * @param mem A physically contiguous region of memory to be filled + * with a ring of ::gxio_mpipe_idesc_t structures. + * @param mem_size Number of bytes in the ring. Must be 128, 512, + * 2048, or 65536 * sizeof(gxio_mpipe_idesc_t). + * @param mem_flags ::gxio_mpipe_mem_flags_e memory flags. + * + * @return 0 on success, ::GXIO_MPIPE_ERR_BAD_NOTIF_RING or + * ::GXIO_ERR_INVAL_MEMORY_SIZE on failure. + */ +extern int gxio_mpipe_init_notif_ring(gxio_mpipe_context_t *context, + unsigned int ring, + void *mem, size_t mem_size, + unsigned int mem_flags); + +/* Configure an interrupt to be sent to a tile on incoming NotifRing + * traffic. Once an interrupt is sent for a particular ring, no more + * will be sent until gxio_mica_enable_notif_ring_interrupt() is called. + * + * @param context An initialized mPIPE context. + * @param x X coordinate of interrupt target tile. + * @param y Y coordinate of interrupt target tile. + * @param i Index of the IPI register which will receive the interrupt. + * @param e Specific event which will be set in the target IPI register when + * the interrupt occurs. + * @param ring The NotifRing index. + * @return Zero on success, GXIO_ERR_INVAL if params are out of range. + */ +extern int gxio_mpipe_request_notif_ring_interrupt(gxio_mpipe_context_t + *context, int x, int y, + int i, int e, + unsigned int ring); + +/* Enable an interrupt on incoming NotifRing traffic. + * + * @param context An initialized mPIPE context. + * @param ring The NotifRing index. + * @return Zero on success, GXIO_ERR_INVAL if params are out of range. + */ +extern int gxio_mpipe_enable_notif_ring_interrupt(gxio_mpipe_context_t + *context, unsigned int ring); + +/* Map all of a client's memory via the given IOTLB. + * @param context An initialized mPIPE context. + * @param iotlb IOTLB index. + * @param pte Page table entry. + * @param flags Flags. + * @return Zero on success, or a negative error code. + */ +extern int gxio_mpipe_register_client_memory(gxio_mpipe_context_t *context, + unsigned int iotlb, HV_PTE pte, + unsigned int flags); + +/***************************************************************** + * Notif Groups * + ******************************************************************/ + +/* Allocate a set of NotifGroups. + * + * The return value is NOT interesting if count is zero. + * + * @param context An initialized mPIPE context. + * @param count Number of NotifGroups required. + * @param first Index of first NotifGroup if ::GXIO_MPIPE_ALLOC_FIXED flag + * is set, otherwise ignored. + * @param flags Flag bits from ::gxio_mpipe_alloc_flags_e. + * @return Index of first allocated buffer NotifGroup, or + * ::GXIO_MPIPE_ERR_NO_NOTIF_GROUP if allocation failed. + */ +extern int gxio_mpipe_alloc_notif_groups(gxio_mpipe_context_t *context, + unsigned int count, + unsigned int first, + unsigned int flags); + +/* Add a NotifRing to a NotifGroup. This only sets a bit in the + * application's 'group' object; the hardware NotifGroup can be + * initialized by passing 'group' to gxio_mpipe_init_notif_group() or + * gxio_mpipe_init_notif_group_and_buckets(). + */ +static inline void +gxio_mpipe_notif_group_add_ring(gxio_mpipe_notif_group_bits_t *bits, int ring) +{ + bits->ring_mask[ring / 64] |= (1ull << (ring % 64)); +} + +/* Set a particular NotifGroup bitmask. Since the load balancer + * makes decisions based on both bucket and NotifGroup state, most + * applications should use gxio_mpipe_init_notif_group_and_buckets() + * rather than using this function to configure just a NotifGroup. + */ +extern int gxio_mpipe_init_notif_group(gxio_mpipe_context_t *context, + unsigned int group, + gxio_mpipe_notif_group_bits_t bits); + +/***************************************************************** + * Load Balancer * + ******************************************************************/ + +/* Allocate a set of load balancer buckets. + * + * The return value is NOT interesting if count is zero. + * + * Note that buckets are allocated in chunks, so allocating one at + * a time is much less efficient than allocating several at once. + * + * Note that the buckets are actually divided into two sub-ranges, of + * different sizes, and different chunk sizes, and the range you get + * by default is determined by the size of the request. Allocations + * cannot span the two sub-ranges. + * + * @param context An initialized mPIPE context. + * @param count Number of buckets required. + * @param first Index of first bucket if ::GXIO_MPIPE_ALLOC_FIXED flag is set, + * otherwise ignored. + * @param flags Flag bits from ::gxio_mpipe_alloc_flags_e. + * @return Index of first allocated buffer bucket, or + * ::GXIO_MPIPE_ERR_NO_BUCKET if allocation failed. + */ +extern int gxio_mpipe_alloc_buckets(gxio_mpipe_context_t *context, + unsigned int count, unsigned int first, + unsigned int flags); + +/* The legal modes for gxio_mpipe_bucket_info_t and + * gxio_mpipe_init_notif_group_and_buckets(). + * + * All modes except ::GXIO_MPIPE_BUCKET_ROUND_ROBIN expect that the user + * will allocate a power-of-two number of buckets and initialize them + * to the same mode. The classifier program then uses the appropriate + * number of low bits from the incoming packet's flow hash to choose a + * load balancer bucket. Based on that bucket's load balancing mode, + * reference count, and currently active NotifRing, the load balancer + * chooses the NotifRing to which the packet will be delivered. + */ +typedef enum { + /* All packets for a bucket go to the same NotifRing unless the + * NotifRing gets full, in which case packets will be dropped. If + * the bucket reference count ever reaches zero, a new NotifRing may + * be chosen. + */ + GXIO_MPIPE_BUCKET_DYNAMIC_FLOW_AFFINITY = + MPIPE_LBL_INIT_DAT_BSTS_TBL__MODE_VAL_DFA, + + /* All packets for a bucket always go to the same NotifRing. + */ + GXIO_MPIPE_BUCKET_STATIC_FLOW_AFFINITY = + MPIPE_LBL_INIT_DAT_BSTS_TBL__MODE_VAL_FIXED, + + /* All packets for a bucket go to the least full NotifRing in the + * group, providing load balancing round robin behavior. + */ + GXIO_MPIPE_BUCKET_ROUND_ROBIN = + MPIPE_LBL_INIT_DAT_BSTS_TBL__MODE_VAL_ALWAYS_PICK, + + /* All packets for a bucket go to the same NotifRing unless the + * NotifRing gets full, at which point the bucket starts using the + * least full NotifRing in the group. If all NotifRings in the + * group are full, packets will be dropped. + */ + GXIO_MPIPE_BUCKET_STICKY_FLOW_LOCALITY = + MPIPE_LBL_INIT_DAT_BSTS_TBL__MODE_VAL_STICKY, + + /* All packets for a bucket go to the same NotifRing unless the + * NotifRing gets full, or a random timer fires, at which point the + * bucket starts using the least full NotifRing in the group. If + * all NotifRings in the group are full, packets will be dropped. + * WARNING: This mode is BROKEN on chips with fewer than 64 tiles. + */ + GXIO_MPIPE_BUCKET_PREFER_FLOW_LOCALITY = + MPIPE_LBL_INIT_DAT_BSTS_TBL__MODE_VAL_STICKY_RAND, + +} gxio_mpipe_bucket_mode_t; + +/* Copy a set of bucket initialization values into the mPIPE + * hardware. Since the load balancer makes decisions based on both + * bucket and NotifGroup state, most applications should use + * gxio_mpipe_init_notif_group_and_buckets() rather than using this + * function to configure a single bucket. + * + * @param context An initialized mPIPE context. + * @param bucket Bucket index to be initialized. + * @param bucket_info Initial reference count, NotifRing index, and mode. + * @return 0 on success, ::GXIO_MPIPE_ERR_BAD_BUCKET on failure. + */ +extern int gxio_mpipe_init_bucket(gxio_mpipe_context_t *context, + unsigned int bucket, + gxio_mpipe_bucket_info_t bucket_info); + +/* Initializes a group and range of buckets and range of rings such + * that the load balancer runs a particular load balancing function. + * + * First, the group is initialized with the given rings. + * + * Second, each bucket is initialized with the mode and group, and a + * ring chosen round-robin from the given rings. + * + * Normally, the classifier picks a bucket, and then the load balancer + * picks a ring, based on the bucket's mode, group, and current ring, + * possibly updating the bucket's ring. + * + * @param context An initialized mPIPE context. + * @param group The group. + * @param ring The first ring. + * @param num_rings The number of rings. + * @param bucket The first bucket. + * @param num_buckets The number of buckets. + * @param mode The load balancing mode. + * + * @return 0 on success, ::GXIO_MPIPE_ERR_BAD_BUCKET, + * ::GXIO_MPIPE_ERR_BAD_NOTIF_GROUP, or + * ::GXIO_MPIPE_ERR_BAD_NOTIF_RING on failure. + */ +extern int gxio_mpipe_init_notif_group_and_buckets(gxio_mpipe_context_t + *context, + unsigned int group, + unsigned int ring, + unsigned int num_rings, + unsigned int bucket, + unsigned int num_buckets, + gxio_mpipe_bucket_mode_t + mode); + +/* Return credits to a NotifRing and/or bucket. + * + * @param context An initialized mPIPE context. + * @param ring The NotifRing index, or -1. + * @param bucket The bucket, or -1. + * @param count The number of credits to return. + */ +static inline void gxio_mpipe_credit(gxio_mpipe_context_t *context, + int ring, int bucket, unsigned int count) +{ + /* NOTE: Fancy struct initialization would break "C89" header test. */ + + MPIPE_IDMA_RELEASE_REGION_ADDR_t offset = { {0} }; + MPIPE_IDMA_RELEASE_REGION_VAL_t val = { {0} }; + + /* + * The mmio_fast_base region starts at the IDMA region, so subtract + * off that initial offset. + */ + offset.region = + MPIPE_MMIO_ADDR__REGION_VAL_IDMA - + MPIPE_MMIO_ADDR__REGION_VAL_IDMA; + offset.ring = ring; + offset.bucket = bucket; + offset.ring_enable = (ring >= 0); + offset.bucket_enable = (bucket >= 0); + val.count = count; + + __gxio_mmio_write(context->mmio_fast_base + offset.word, val.word); +} + +/***************************************************************** + * Egress Rings * + ******************************************************************/ + +/* Allocate a set of eDMA rings. + * + * The return value is NOT interesting if count is zero. + * + * @param context An initialized mPIPE context. + * @param count Number of eDMA rings required. + * @param first Index of first eDMA ring if ::GXIO_MPIPE_ALLOC_FIXED flag + * is set, otherwise ignored. + * @param flags Flag bits from ::gxio_mpipe_alloc_flags_e. + * @return Index of first allocated buffer eDMA ring, or + * ::GXIO_MPIPE_ERR_NO_EDMA_RING if allocation failed. + */ +extern int gxio_mpipe_alloc_edma_rings(gxio_mpipe_context_t *context, + unsigned int count, unsigned int first, + unsigned int flags); + +/* Initialize an eDMA ring, using the given memory and size. + * + * @param context An initialized mPIPE context. + * @param ring The eDMA ring index. + * @param channel The channel to use. This must be one of the channels + * associated with the context's set of open links. + * @param mem A physically contiguous region of memory to be filled + * with a ring of ::gxio_mpipe_edesc_t structures. + * @param mem_size Number of bytes in the ring. Must be 512, 2048, + * 8192 or 65536, times 16 (i.e. sizeof(gxio_mpipe_edesc_t)). + * @param mem_flags ::gxio_mpipe_mem_flags_e memory flags. + * + * @return 0 on success, ::GXIO_MPIPE_ERR_BAD_EDMA_RING or + * ::GXIO_ERR_INVAL_MEMORY_SIZE on failure. + */ +extern int gxio_mpipe_init_edma_ring(gxio_mpipe_context_t *context, + unsigned int ring, unsigned int channel, + void *mem, size_t mem_size, + unsigned int mem_flags); + +/***************************************************************** + * Classifier Program * + ******************************************************************/ + +/* + * + * Functions for loading or configuring the mPIPE classifier program. + * + * The mPIPE classification processors all run a special "classifier" + * program which, for each incoming packet, parses the packet headers, + * encodes some packet metadata in the "idesc", and either drops the + * packet, or picks a notif ring to handle the packet, and a buffer + * stack to contain the packet, usually based on the channel, VLAN, + * dMAC, flow hash, and packet size, under the guidance of the "rules" + * API described below. + * + * @section gxio_mpipe_classifier_default Default Classifier + * + * The MDE provides a simple "default" classifier program. It is + * shipped as source in "$TILERA_ROOT/src/sys/mpipe/classifier.c", + * which serves as its official documentation. It is shipped as a + * binary program in "$TILERA_ROOT/tile/boot/classifier", which is + * automatically included in bootroms created by "tile-monitor", and + * is automatically loaded by the hypervisor at boot time. + * + * The L2 analysis handles LLC packets, SNAP packets, and "VLAN + * wrappers" (keeping the outer VLAN). + * + * The L3 analysis handles IPv4 and IPv6, dropping packets with bad + * IPv4 header checksums, requesting computation of a TCP/UDP checksum + * if appropriate, and hashing the dest and src IP addresses, plus the + * ports for TCP/UDP packets, into the flow hash. No special analysis + * is done for "fragmented" packets or "tunneling" protocols. Thus, + * the first fragment of a fragmented TCP/UDP packet is hashed using + * src/dest IP address and ports and all subsequent fragments are only + * hashed according to src/dest IP address. + * + * The L3 analysis handles other packets too, hashing the dMAC + * smac into a flow hash. + * + * The channel, VLAN, and dMAC used to pick a "rule" (see the + * "rules" APIs below), which in turn is used to pick a buffer stack + * (based on the packet size) and a bucket (based on the flow hash). + * + * To receive traffic matching a particular (channel/VLAN/dMAC + * pattern, an application should allocate its own buffer stacks and + * load balancer buckets, and map traffic to those stacks and buckets, + * as decribed by the "rules" API below. + * + * Various packet metadata is encoded in the idesc. The flow hash is + * four bytes at 0x0C. The VLAN is two bytes at 0x10. The ethtype is + * two bytes at 0x12. The l3 start is one byte at 0x14. The l4 start + * is one byte at 0x15 for IPv4 and IPv6 packets, and otherwise zero. + * The protocol is one byte at 0x16 for IPv4 and IPv6 packets, and + * otherwise zero. + * + * @section gxio_mpipe_classifier_custom Custom Classifiers. + * + * A custom classifier may be created using "tile-mpipe-cc" with a + * customized version of the default classifier sources. + * + * The custom classifier may be included in bootroms using the + * "--classifier" option to "tile-monitor", or loaded dynamically + * using gxio_mpipe_classifier_load_from_file(). + * + * Be aware that "extreme" customizations may break the assumptions of + * the "rules" APIs described below, but simple customizations, such + * as adding new packet metadata, should be fine. + */ + +/* A set of classifier rules, plus a context. */ +typedef struct { + + /* The context. */ + gxio_mpipe_context_t *context; + + /* The actual rules. */ + gxio_mpipe_rules_list_t list; + +} gxio_mpipe_rules_t; + +/* Initialize a classifier program rules list. + * + * This function can be called on a previously initialized rules list + * to discard any previously added rules. + * + * @param rules Rules list to initialize. + * @param context An initialized mPIPE context. + */ +extern void gxio_mpipe_rules_init(gxio_mpipe_rules_t *rules, + gxio_mpipe_context_t *context); + +/* Begin a new rule on the indicated rules list. + * + * Note that an empty rule matches all packets, but an empty rule list + * matches no packets. + * + * @param rules Rules list to which new rule is appended. + * @param bucket First load balancer bucket to which packets will be + * delivered. + * @param num_buckets Number of buckets (must be a power of two) across + * which packets will be distributed based on the "flow hash". + * @param stacks Either NULL, to assign each packet to the smallest + * initialized buffer stack which does not induce chaining (and to + * drop packets which exceed the largest initialized buffer stack + * buffer size), or an array, with each entry indicating which buffer + * stack should be used for packets up to that size (with 255 + * indicating that those packets should be dropped). + * @return 0 on success, or a negative error code on failure. + */ +extern int gxio_mpipe_rules_begin(gxio_mpipe_rules_t *rules, + unsigned int bucket, + unsigned int num_buckets, + gxio_mpipe_rules_stacks_t *stacks); + +/* Set the headroom of the current rule. + * + * @param rules Rules list whose current rule will be modified. + * @param headroom The headroom. + * @return 0 on success, or a negative error code on failure. + */ +extern int gxio_mpipe_rules_set_headroom(gxio_mpipe_rules_t *rules, + uint8_t headroom); + +/* Indicate that packets from a particular channel can be delivered + * to the buckets and buffer stacks associated with the current rule. + * + * Channels added must be associated with links opened by the mPIPE context + * used in gxio_mpipe_rules_init(). A rule with no channels is equivalent + * to a rule naming all such associated channels. + * + * @param rules Rules list whose current rule will be modified. + * @param channel The channel to add. + * @return 0 on success, or a negative error code on failure. + */ +extern int gxio_mpipe_rules_add_channel(gxio_mpipe_rules_t *rules, + unsigned int channel); + +/* Commit rules. + * + * The rules are sent to the hypervisor, where they are combined with + * the rules from other apps, and used to program the hardware classifier. + * + * Note that if this function returns an error, then the rules will NOT + * have been committed, even if the error is due to interactions with + * rules from another app. + * + * @param rules Rules list to commit. + * @return 0 on success, or a negative error code on failure. + */ +extern int gxio_mpipe_rules_commit(gxio_mpipe_rules_t *rules); + +/***************************************************************** + * Ingress Queue Wrapper * + ******************************************************************/ + +/* + * + * Convenience functions for receiving packets from a NotifRing and + * sending packets via an eDMA ring. + * + * The mpipe ingress and egress hardware uses shared memory packet + * descriptors to describe packets that have arrived on ingress or + * are destined for egress. These descriptors are stored in shared + * memory ring buffers and written or read by hardware as necessary. + * The gxio library provides wrapper functions that manage the head and + * tail pointers for these rings, allowing the user to easily read or + * write packet descriptors. + * + * The initialization interface for ingress and egress rings is quite + * similar. For example, to create an ingress queue, the user passes + * a ::gxio_mpipe_iqueue_t state object, a ring number from + * gxio_mpipe_alloc_notif_rings(), and the address of memory to hold a + * ring buffer to the gxio_mpipe_iqueue_init() function. The function + * returns success when the state object has been initialized and the + * hardware configured to deliver packets to the specified ring + * buffer. Similarly, gxio_mpipe_equeue_init() takes a + * ::gxio_mpipe_equeue_t state object, a ring number from + * gxio_mpipe_alloc_edma_rings(), and a shared memory buffer. + * + * @section gxio_mpipe_iqueue Working with Ingress Queues + * + * Once initialized, the gxio_mpipe_iqueue_t API provides two flows + * for getting the ::gxio_mpipe_idesc_t packet descriptor associated + * with incoming packets. The simplest is to call + * gxio_mpipe_iqueue_get() or gxio_mpipe_iqueue_try_get(). These + * functions copy the oldest packet descriptor out of the NotifRing and + * into a descriptor provided by the caller. They also immediately + * inform the hardware that a descriptor has been processed. + * + * For applications with stringent performance requirements, higher + * efficiency can be achieved by avoiding the packet descriptor copy + * and processing multiple descriptors at once. The + * gxio_mpipe_iqueue_peek() and gxio_mpipe_iqueue_try_peek() functions + * allow such optimizations. These functions provide a pointer to the + * next valid ingress descriptor in the NotifRing's shared memory ring + * buffer, and a count of how many contiguous descriptors are ready to + * be processed. The application can then process any number of those + * descriptors in place, calling gxio_mpipe_iqueue_consume() to inform + * the hardware after each one has been processed. + * + * @section gxio_mpipe_equeue Working with Egress Queues + * + * Similarly, the egress queue API provides a high-performance + * interface plus a simple wrapper for use in posting + * ::gxio_mpipe_edesc_t egress packet descriptors. The simple + * version, gxio_mpipe_equeue_put(), allows the programmer to wait for + * an eDMA ring slot to become available and write a single descriptor + * into the ring. + * + * Alternatively, you can reserve slots in the eDMA ring using + * gxio_mpipe_equeue_reserve() or gxio_mpipe_equeue_try_reserve(), and + * then fill in each slot using gxio_mpipe_equeue_put_at(). This + * capability can be used to amortize the cost of reserving slots + * across several packets. It also allows gather operations to be + * performed on a shared equeue, by ensuring that the edescs for all + * the fragments are all contiguous in the eDMA ring. + * + * The gxio_mpipe_equeue_reserve() and gxio_mpipe_equeue_try_reserve() + * functions return a 63-bit "completion slot", which is actually a + * sequence number, the low bits of which indicate the ring buffer + * index and the high bits the number of times the application has + * gone around the egress ring buffer. The extra bits allow an + * application to check for egress completion by calling + * gxio_mpipe_equeue_is_complete() to see whether a particular 'slot' + * number has finished. Given the maximum packet rates of the Gx + * processor, the 63-bit slot number will never wrap. + * + * In practice, most applications use the ::gxio_mpipe_edesc_t::hwb + * bit to indicate that the buffers containing egress packet data + * should be pushed onto a buffer stack when egress is complete. Such + * applications generally do not need to know when an egress operation + * completes (since there is no need to free a buffer post-egress), + * and thus can use the optimized gxio_mpipe_equeue_reserve_fast() or + * gxio_mpipe_equeue_try_reserve_fast() functions, which return a 24 + * bit "slot", instead of a 63-bit "completion slot". + * + * Once a slot has been "reserved", it MUST be filled. If the + * application reserves a slot and then decides that it does not + * actually need it, it can set the ::gxio_mpipe_edesc_t::ns (no send) + * bit on the descriptor passed to gxio_mpipe_equeue_put_at() to + * indicate that no data should be sent. This technique can also be + * used to drop an incoming packet, instead of forwarding it, since + * any buffer will still be pushed onto the buffer stack when the + * egress descriptor is processed. + */ + +/* A convenient interface to a NotifRing, for use by a single thread. + */ +typedef struct { + + /* The context. */ + gxio_mpipe_context_t *context; + + /* The actual NotifRing. */ + gxio_mpipe_idesc_t *idescs; + + /* The number of entries. */ + unsigned long num_entries; + + /* The number of entries minus one. */ + unsigned long mask_num_entries; + + /* The log2() of the number of entries. */ + unsigned long log2_num_entries; + + /* The next entry. */ + unsigned int head; + + /* The NotifRing id. */ + unsigned int ring; + +#ifdef __BIG_ENDIAN__ + /* The number of byteswapped entries. */ + unsigned int swapped; +#endif + +} gxio_mpipe_iqueue_t; + +/* Initialize an "iqueue". + * + * Takes the iqueue plus the same args as gxio_mpipe_init_notif_ring(). + */ +extern int gxio_mpipe_iqueue_init(gxio_mpipe_iqueue_t *iqueue, + gxio_mpipe_context_t *context, + unsigned int ring, + void *mem, size_t mem_size, + unsigned int mem_flags); + +/* Advance over some old entries in an iqueue. + * + * Please see the documentation for gxio_mpipe_iqueue_consume(). + * + * @param iqueue An ingress queue initialized via gxio_mpipe_iqueue_init(). + * @param count The number of entries to advance over. + */ +static inline void gxio_mpipe_iqueue_advance(gxio_mpipe_iqueue_t *iqueue, + int count) +{ + /* Advance with proper wrap. */ + int head = iqueue->head + count; + iqueue->head = + (head & iqueue->mask_num_entries) + + (head >> iqueue->log2_num_entries); + +#ifdef __BIG_ENDIAN__ + /* HACK: Track swapped entries. */ + iqueue->swapped -= count; +#endif +} + +/* Release the ring and bucket for an old entry in an iqueue. + * + * Releasing the ring allows more packets to be delivered to the ring. + * + * Releasing the bucket allows flows using the bucket to be moved to a + * new ring when using GXIO_MPIPE_BUCKET_DYNAMIC_FLOW_AFFINITY. + * + * This function is shorthand for "gxio_mpipe_credit(iqueue->context, + * iqueue->ring, idesc->bucket_id, 1)", and it may be more convenient + * to make that underlying call, using those values, instead of + * tracking the entire "idesc". + * + * If packet processing is deferred, optimal performance requires that + * the releasing be deferred as well. + * + * Please see the documentation for gxio_mpipe_iqueue_consume(). + * + * @param iqueue An ingress queue initialized via gxio_mpipe_iqueue_init(). + * @param idesc The descriptor which was processed. + */ +static inline void gxio_mpipe_iqueue_release(gxio_mpipe_iqueue_t *iqueue, + gxio_mpipe_idesc_t *idesc) +{ + gxio_mpipe_credit(iqueue->context, iqueue->ring, idesc->bucket_id, 1); +} + +/* Consume a packet from an "iqueue". + * + * After processing packets peeked at via gxio_mpipe_iqueue_peek() + * or gxio_mpipe_iqueue_try_peek(), you must call this function, or + * gxio_mpipe_iqueue_advance() plus gxio_mpipe_iqueue_release(), to + * advance over those entries, and release their rings and buckets. + * + * You may call this function as each packet is processed, or you can + * wait until several packets have been processed. + * + * Note that if you are using a single bucket, and you are handling + * batches of N packets, then you can replace several calls to this + * function with calls to "gxio_mpipe_iqueue_advance(iqueue, N)" and + * "gxio_mpipe_credit(iqueue->context, iqueue->ring, bucket, N)". + * + * Note that if your classifier sets "idesc->nr", then you should + * explicitly call "gxio_mpipe_iqueue_advance(iqueue, idesc)" plus + * "gxio_mpipe_credit(iqueue->context, iqueue->ring, -1, 1)", to + * avoid incorrectly crediting the (unused) bucket. + * + * @param iqueue An ingress queue initialized via gxio_mpipe_iqueue_init(). + * @param idesc The descriptor which was processed. + */ +static inline void gxio_mpipe_iqueue_consume(gxio_mpipe_iqueue_t *iqueue, + gxio_mpipe_idesc_t *idesc) +{ + gxio_mpipe_iqueue_advance(iqueue, 1); + gxio_mpipe_iqueue_release(iqueue, idesc); +} + +/* Peek at the next packet(s) in an "iqueue", without waiting. + * + * If no packets are available, fills idesc_ref with NULL, and then + * returns ::GXIO_MPIPE_ERR_IQUEUE_EMPTY. Otherwise, fills idesc_ref + * with the address of the next valid packet descriptor, and returns + * the maximum number of valid descriptors which can be processed. + * You may process fewer descriptors if desired. + * + * Call gxio_mpipe_iqueue_consume() on each packet once it has been + * processed (or dropped), to allow more packets to be delivered. + * + * @param iqueue An ingress queue initialized via gxio_mpipe_iqueue_init(). + * @param idesc_ref A pointer to a packet descriptor pointer. + * @return The (positive) number of packets which can be processed, + * or ::GXIO_MPIPE_ERR_IQUEUE_EMPTY if no packets are available. + */ +static inline int gxio_mpipe_iqueue_try_peek(gxio_mpipe_iqueue_t *iqueue, + gxio_mpipe_idesc_t **idesc_ref) +{ + gxio_mpipe_idesc_t *next; + + uint64_t head = iqueue->head; + uint64_t tail = __gxio_mmio_read(iqueue->idescs); + + /* Available entries. */ + uint64_t avail = + (tail >= head) ? (tail - head) : (iqueue->num_entries - head); + + if (avail == 0) { + *idesc_ref = NULL; + return GXIO_MPIPE_ERR_IQUEUE_EMPTY; + } + + next = &iqueue->idescs[head]; + + /* ISSUE: Is this helpful? */ + __insn_prefetch(next); + +#ifdef __BIG_ENDIAN__ + /* HACK: Swap new entries directly in memory. */ + { + int i, j; + for (i = iqueue->swapped; i < avail; i++) { + for (j = 0; j < 8; j++) + next[i].words[j] = + __builtin_bswap64(next[i].words[j]); + } + iqueue->swapped = avail; + } +#endif + + *idesc_ref = next; + + return avail; +} + +/* Drop a packet by pushing its buffer (if appropriate). + * + * NOTE: The caller must still call gxio_mpipe_iqueue_consume() if idesc + * came from gxio_mpipe_iqueue_try_peek() or gxio_mpipe_iqueue_peek(). + * + * @param iqueue An ingress queue initialized via gxio_mpipe_iqueue_init(). + * @param idesc A packet descriptor. + */ +static inline void gxio_mpipe_iqueue_drop(gxio_mpipe_iqueue_t *iqueue, + gxio_mpipe_idesc_t *idesc) +{ + /* FIXME: Handle "chaining" properly. */ + + if (!idesc->be) { + unsigned char *va = gxio_mpipe_idesc_get_va(idesc); + gxio_mpipe_push_buffer(iqueue->context, idesc->stack_idx, va); + } +} + +/***************************************************************** + * Egress Queue Wrapper * + ******************************************************************/ + +/* A convenient, thread-safe interface to an eDMA ring. */ +typedef struct { + + /* State object for tracking head and tail pointers. */ + __gxio_dma_queue_t dma_queue; + + /* The ring entries. */ + gxio_mpipe_edesc_t *edescs; + + /* The number of entries minus one. */ + unsigned long mask_num_entries; + + /* The log2() of the number of entries. */ + unsigned long log2_num_entries; + +} gxio_mpipe_equeue_t; + +/* Initialize an "equeue". + * + * Takes the equeue plus the same args as gxio_mpipe_init_edma_ring(). + */ +extern int gxio_mpipe_equeue_init(gxio_mpipe_equeue_t *equeue, + gxio_mpipe_context_t *context, + unsigned int edma_ring_id, + unsigned int channel, + void *mem, unsigned int mem_size, + unsigned int mem_flags); + +/* Reserve completion slots for edescs. + * + * Use gxio_mpipe_equeue_put_at() to actually populate the slots. + * + * This function is slower than gxio_mpipe_equeue_reserve_fast(), but + * returns a full 64 bit completion slot, which can be used with + * gxio_mpipe_equeue_is_complete(). + * + * @param equeue An egress queue initialized via gxio_mpipe_equeue_init(). + * @param num Number of slots to reserve (must be non-zero). + * @return The first reserved completion slot, or a negative error code. + */ +static inline int64_t gxio_mpipe_equeue_reserve(gxio_mpipe_equeue_t *equeue, + unsigned int num) +{ + return __gxio_dma_queue_reserve_aux(&equeue->dma_queue, num, true); +} + +/* Reserve completion slots for edescs, if possible. + * + * Use gxio_mpipe_equeue_put_at() to actually populate the slots. + * + * This function is slower than gxio_mpipe_equeue_try_reserve_fast(), + * but returns a full 64 bit completion slot, which can be used with + * gxio_mpipe_equeue_is_complete(). + * + * @param equeue An egress queue initialized via gxio_mpipe_equeue_init(). + * @param num Number of slots to reserve (must be non-zero). + * @return The first reserved completion slot, or a negative error code. + */ +static inline int64_t gxio_mpipe_equeue_try_reserve(gxio_mpipe_equeue_t + *equeue, unsigned int num) +{ + return __gxio_dma_queue_reserve_aux(&equeue->dma_queue, num, false); +} + +/* Reserve slots for edescs. + * + * Use gxio_mpipe_equeue_put_at() to actually populate the slots. + * + * This function is faster than gxio_mpipe_equeue_reserve(), but + * returns a 24 bit slot (instead of a 64 bit completion slot), which + * thus cannot be used with gxio_mpipe_equeue_is_complete(). + * + * @param equeue An egress queue initialized via gxio_mpipe_equeue_init(). + * @param num Number of slots to reserve (should be non-zero). + * @return The first reserved slot, or a negative error code. + */ +static inline int64_t gxio_mpipe_equeue_reserve_fast(gxio_mpipe_equeue_t + *equeue, unsigned int num) +{ + return __gxio_dma_queue_reserve(&equeue->dma_queue, num, true, false); +} + +/* Reserve slots for edescs, if possible. + * + * Use gxio_mpipe_equeue_put_at() to actually populate the slots. + * + * This function is faster than gxio_mpipe_equeue_try_reserve(), but + * returns a 24 bit slot (instead of a 64 bit completion slot), which + * thus cannot be used with gxio_mpipe_equeue_is_complete(). + * + * @param equeue An egress queue initialized via gxio_mpipe_equeue_init(). + * @param num Number of slots to reserve (should be non-zero). + * @return The first reserved slot, or a negative error code. + */ +static inline int64_t gxio_mpipe_equeue_try_reserve_fast(gxio_mpipe_equeue_t + *equeue, + unsigned int num) +{ + return __gxio_dma_queue_reserve(&equeue->dma_queue, num, false, false); +} + +/* + * HACK: This helper function tricks gcc 4.6 into avoiding saving + * a copy of "edesc->words[0]" on the stack for no obvious reason. + */ + +static inline void gxio_mpipe_equeue_put_at_aux(gxio_mpipe_equeue_t *equeue, + uint_reg_t ew[2], + unsigned long slot) +{ + unsigned long edma_slot = slot & equeue->mask_num_entries; + gxio_mpipe_edesc_t *edesc_p = &equeue->edescs[edma_slot]; + + /* + * ISSUE: Could set eDMA ring to be on generation 1 at start, which + * would avoid the negation here, perhaps allowing "__insn_bfins()". + */ + ew[0] |= !((slot >> equeue->log2_num_entries) & 1); + + /* + * NOTE: We use "__gxio_mpipe_write()", plus the fact that the eDMA + * queue alignment restrictions ensure that these two words are on + * the same cacheline, to force proper ordering between the stores. + */ + __gxio_mmio_write64(&edesc_p->words[1], ew[1]); + __gxio_mmio_write64(&edesc_p->words[0], ew[0]); +} + +/* Post an edesc to a given slot in an equeue. + * + * This function copies the supplied edesc into entry "slot mod N" in + * the underlying ring, setting the "gen" bit to the appropriate value + * based on "(slot mod N*2)", where "N" is the size of the ring. Note + * that the higher bits of slot are unused, and thus, this function + * can handle "slots" as well as "completion slots". + * + * Normally this function is used to fill in slots reserved by + * gxio_mpipe_equeue_try_reserve(), gxio_mpipe_equeue_reserve(), + * gxio_mpipe_equeue_try_reserve_fast(), or + * gxio_mpipe_equeue_reserve_fast(), + * + * This function can also be used without "reserving" slots, if the + * application KNOWS that the ring can never overflow, for example, by + * pushing fewer buffers into the buffer stacks than there are total + * slots in the equeue, but this is NOT recommended. + * + * @param equeue An egress queue initialized via gxio_mpipe_equeue_init(). + * @param edesc The egress descriptor to be posted. + * @param slot An egress slot (only the low bits are actually used). + */ +static inline void gxio_mpipe_equeue_put_at(gxio_mpipe_equeue_t *equeue, + gxio_mpipe_edesc_t edesc, + unsigned long slot) +{ + gxio_mpipe_equeue_put_at_aux(equeue, edesc.words, slot); +} + +/* Post an edesc to the next slot in an equeue. + * + * This is a convenience wrapper around + * gxio_mpipe_equeue_reserve_fast() and gxio_mpipe_equeue_put_at(). + * + * @param equeue An egress queue initialized via gxio_mpipe_equeue_init(). + * @param edesc The egress descriptor to be posted. + * @return 0 on success. + */ +static inline int gxio_mpipe_equeue_put(gxio_mpipe_equeue_t *equeue, + gxio_mpipe_edesc_t edesc) +{ + int64_t slot = gxio_mpipe_equeue_reserve_fast(equeue, 1); + if (slot < 0) + return (int)slot; + + gxio_mpipe_equeue_put_at(equeue, edesc, slot); + + return 0; +} + +/* Ask the mPIPE hardware to egress outstanding packets immediately. + * + * This call is not necessary, but may slightly reduce overall latency. + * + * Technically, you should flush all gxio_mpipe_equeue_put_at() writes + * to memory before calling this function, to ensure the descriptors + * are visible in memory before the mPIPE hardware actually looks for + * them. But this should be very rare, and the only side effect would + * be increased latency, so it is up to the caller to decide whether + * or not to flush memory. + * + * @param equeue An egress queue initialized via gxio_mpipe_equeue_init(). + */ +static inline void gxio_mpipe_equeue_flush(gxio_mpipe_equeue_t *equeue) +{ + /* Use "ring_idx = 0" and "count = 0" to "wake up" the eDMA ring. */ + MPIPE_EDMA_POST_REGION_VAL_t val = { {0} }; + /* Flush the write buffers. */ + __insn_flushwb(); + __gxio_mmio_write(equeue->dma_queue.post_region_addr, val.word); +} + +/* Determine if a given edesc has been completed. + * + * Note that this function requires a "completion slot", and thus may + * NOT be used with a "slot" from gxio_mpipe_equeue_reserve_fast() or + * gxio_mpipe_equeue_try_reserve_fast(). + * + * @param equeue An egress queue initialized via gxio_mpipe_equeue_init(). + * @param completion_slot The completion slot used by the edesc. + * @param update If true, and the desc does not appear to have completed + * yet, then update any software cache of the hardware completion counter, + * and check again. This should normally be true. + * @return True iff the given edesc has been completed. + */ +static inline int gxio_mpipe_equeue_is_complete(gxio_mpipe_equeue_t *equeue, + int64_t completion_slot, + int update) +{ + return __gxio_dma_queue_is_complete(&equeue->dma_queue, + completion_slot, update); +} + +/***************************************************************** + * Link Management * + ******************************************************************/ + +/* + * + * Functions for manipulating and sensing the state and configuration + * of physical network links. + * + * @section gxio_mpipe_link_perm Link Permissions + * + * Opening a link (with gxio_mpipe_link_open()) requests a set of link + * permissions, which control what may be done with the link, and potentially + * what permissions may be granted to other processes. + * + * Data permission allows the process to receive packets from the link by + * specifying the link's channel number in mPIPE packet distribution rules, + * and to send packets to the link by using the link's channel number as + * the target for an eDMA ring. + * + * Stats permission allows the process to retrieve link attributes (such as + * the speeds it is capable of running at, or whether it is currently up), and + * to read and write certain statistics-related registers in the link's MAC. + * + * Control permission allows the process to retrieve and modify link attributes + * (so that it may, for example, bring the link up and take it down), and + * read and write many registers in the link's MAC and PHY. + * + * Any permission may be requested as shared, which allows other processes + * to also request shared permission, or exclusive, which prevents other + * processes from requesting it. In keeping with GXIO's typical usage in + * an embedded environment, the defaults for all permissions are shared. + * + * Permissions are granted on a first-come, first-served basis, so if two + * applications request an exclusive permission on the same link, the one + * to run first will win. Note, however, that some system components, like + * the kernel Ethernet driver, may get an opportunity to open links before + * any applications run. + * + * @section gxio_mpipe_link_names Link Names + * + * Link names are of the form gbenumber (for Gigabit Ethernet), + * xgbenumber (for 10 Gigabit Ethernet), loopnumber (for + * internal mPIPE loopback), or ilknumber/channel + * (for Interlaken links); for instance, gbe0, xgbe1, loop3, and + * ilk0/12 are all possible link names. The correspondence between + * the link name and an mPIPE instance number or mPIPE channel number is + * system-dependent; all links will not exist on all systems, and the set + * of numbers used for a particular link type may not start at zero and may + * not be contiguous. Use gxio_mpipe_link_enumerate() to retrieve the set of + * links which exist on a system, and always use gxio_mpipe_link_instance() + * to determine which mPIPE controls a particular link. + * + * Note that in some cases, links may share hardware, such as PHYs, or + * internal mPIPE buffers; in these cases, only one of the links may be + * opened at a time. This is especially common with xgbe and gbe ports, + * since each xgbe port uses 4 SERDES lanes, each of which may also be + * configured as one gbe port. + * + * @section gxio_mpipe_link_states Link States + * + * The mPIPE link management model revolves around three different states, + * which are maintained for each link: + * + * 1. The current link state: is the link up now, and if so, at + * what speed? + * + * 2. The desired link state: what do we want the link state to be? + * The system is always working to make this state the current state; + * thus, if the desired state is up, and the link is down, we'll be + * constantly trying to bring it up, automatically. + * + * 3. The possible link state: what speeds are valid for this + * particular link? Or, in other words, what are the capabilities of + * the link hardware? + * + * These link states are not, strictly speaking, related to application + * state; they may be manipulated at any time, whether or not the link + * is currently being used for data transfer. However, for convenience, + * gxio_mpipe_link_open() and gxio_mpipe_link_close() (or application exit) + * can affect the link state. These implicit link management operations + * may be modified or disabled by the use of link open flags. + * + * From an application, you can use gxio_mpipe_link_get_attr() + * and gxio_mpipe_link_set_attr() to manipulate the link states. + * gxio_mpipe_link_get_attr() with ::GXIO_MPIPE_LINK_POSSIBLE_STATE + * gets you the possible link state. gxio_mpipe_link_get_attr() with + * ::GXIO_MPIPE_LINK_CURRENT_STATE gets you the current link state. + * Finally, gxio_mpipe_link_set_attr() and gxio_mpipe_link_get_attr() + * with ::GXIO_MPIPE_LINK_DESIRED_STATE allow you to modify or retrieve + * the desired link state. + * + * If you want to manage a link from a part of your application which isn't + * involved in packet processing, you can use the ::GXIO_MPIPE_LINK_NO_DATA + * flags on a gxio_mpipe_link_open() call. This opens the link, but does + * not request data permission, so it does not conflict with any exclusive + * permissions which may be held by other processes. You can then can use + * gxio_mpipe_link_get_attr() and gxio_mpipe_link_set_attr() on this link + * object to bring up or take down the link. + * + * Some links support link state bits which support various loopback + * modes. ::GXIO_MPIPE_LINK_LOOP_MAC tests datapaths within the Tile + * Processor itself; ::GXIO_MPIPE_LINK_LOOP_PHY tests the datapath between + * the Tile Processor and the external physical layer interface chip; and + * ::GXIO_MPIPE_LINK_LOOP_EXT tests the entire network datapath with the + * aid of an external loopback connector. In addition to enabling hardware + * testing, such configuration can be useful for software testing, as well. + * + * When LOOP_MAC or LOOP_PHY is enabled, packets transmitted on a channel + * will be received by that channel, instead of being emitted on the + * physical link, and packets received on the physical link will be ignored. + * Other than that, all standard GXIO operations work as you might expect. + * Note that loopback operation requires that the link be brought up using + * one or more of the GXIO_MPIPE_LINK_SPEED_xxx link state bits. + * + * Those familiar with previous versions of the MDE on TILEPro hardware + * will notice significant similarities between the NetIO link management + * model and the mPIPE link management model. However, the NetIO model + * was developed in stages, and some of its features -- for instance, + * the default setting of certain flags -- were shaped by the need to be + * compatible with previous versions of NetIO. Since the features provided + * by the mPIPE hardware and the mPIPE GXIO library are significantly + * different than those provided by NetIO, in some cases, we have made + * different choices in the mPIPE link management API. Thus, please read + * this documentation carefully before assuming that mPIPE link management + * operations are exactly equivalent to their NetIO counterparts. + */ + +/* An object used to manage mPIPE link state and resources. */ +typedef struct { + /* The overall mPIPE context. */ + gxio_mpipe_context_t *context; + + /* The channel number used by this link. */ + uint8_t channel; + + /* The MAC index used by this link. */ + uint8_t mac; +} gxio_mpipe_link_t; + +/* Retrieve one of this system's legal link names, and its MAC address. + * + * @param index Link name index. If a system supports N legal link names, + * then indices between 0 and N - 1, inclusive, each correspond to one of + * those names. Thus, to retrieve all of a system's legal link names, + * call this function in a loop, starting with an index of zero, and + * incrementing it once per iteration until -1 is returned. + * @param link_name Pointer to the buffer which will receive the retrieved + * link name. The buffer should contain space for at least + * ::GXIO_MPIPE_LINK_NAME_LEN bytes; the returned name, including the + * terminating null byte, will be no longer than that. + * @param link_name Pointer to the buffer which will receive the retrieved + * MAC address. The buffer should contain space for at least 6 bytes. + * @return Zero if a link name was successfully retrieved; -1 if one was + * not. + */ +extern int gxio_mpipe_link_enumerate_mac(int index, char *link_name, + uint8_t *mac_addr); + +/* Open an mPIPE link. + * + * A link must be opened before it may be used to send or receive packets, + * and before its state may be examined or changed. Depending up on the + * link's intended use, one or more link permissions may be requested via + * the flags parameter; see @ref gxio_mpipe_link_perm. In addition, flags + * may request that the link's state be modified at open time. See @ref + * gxio_mpipe_link_states and @ref gxio_mpipe_link_open_flags for more detail. + * + * @param link A link state object, which will be initialized if this + * function completes successfully. + * @param context An initialized mPIPE context. + * @param link_name Name of the link. + * @param flags Zero or more @ref gxio_mpipe_link_open_flags, ORed together. + * @return 0 if the link was successfully opened, or a negative error code. + * + */ +extern int gxio_mpipe_link_open(gxio_mpipe_link_t *link, + gxio_mpipe_context_t *context, + const char *link_name, unsigned int flags); + +/* Close an mPIPE link. + * + * Closing a link makes it available for use by other processes. Once + * a link has been closed, packets may no longer be sent on or received + * from the link, and its state may not be examined or changed. + * + * @param link A link state object, which will no longer be initialized + * if this function completes successfully. + * @return 0 if the link was successfully closed, or a negative error code. + * + */ +extern int gxio_mpipe_link_close(gxio_mpipe_link_t *link); + +/* Return a link's channel number. + * + * @param link A properly initialized link state object. + * @return The channel number for the link. + */ +static inline int gxio_mpipe_link_channel(gxio_mpipe_link_t *link) +{ + return link->channel; +} + +/////////////////////////////////////////////////////////////////// +// Timestamp // +/////////////////////////////////////////////////////////////////// + +/* Get the timestamp of mPIPE when this routine is called. + * + * @param context An initialized mPIPE context. + * @param ts A timespec structure to store the current clock. + * @return If the call was successful, zero; otherwise, a negative error + * code. + */ +extern int gxio_mpipe_get_timestamp(gxio_mpipe_context_t *context, + struct timespec *ts); + +/* Set the timestamp of mPIPE. + * + * @param context An initialized mPIPE context. + * @param ts A timespec structure to store the requested clock. + * @return If the call was successful, zero; otherwise, a negative error + * code. + */ +extern int gxio_mpipe_set_timestamp(gxio_mpipe_context_t *context, + const struct timespec *ts); + +/* Adjust the timestamp of mPIPE. + * + * @param context An initialized mPIPE context. + * @param delta A signed time offset to adjust, in nanoseconds. + * The absolute value of this parameter must be less than or + * equal to 1000000000. + * @return If the call was successful, zero; otherwise, a negative error + * code. + */ +extern int gxio_mpipe_adjust_timestamp(gxio_mpipe_context_t *context, + int64_t delta); + +#endif /* !_GXIO_MPIPE_H_ */ diff --git a/arch/tile/include/hv/drv_mpipe_intf.h b/arch/tile/include/hv/drv_mpipe_intf.h new file mode 100644 index 000000000000..6cdae3bf046e --- /dev/null +++ b/arch/tile/include/hv/drv_mpipe_intf.h @@ -0,0 +1,602 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/** + * Interface definitions for the mpipe driver. + */ + +#ifndef _SYS_HV_DRV_MPIPE_INTF_H +#define _SYS_HV_DRV_MPIPE_INTF_H + +#include +#include + + +/** Number of buffer stacks (32). */ +#define HV_MPIPE_NUM_BUFFER_STACKS \ + (MPIPE_MMIO_INIT_DAT_GX36_1__BUFFER_STACK_MASK_WIDTH) + +/** Number of NotifRings (256). */ +#define HV_MPIPE_NUM_NOTIF_RINGS (MPIPE_NUM_NOTIF_RINGS) + +/** Number of NotifGroups (32). */ +#define HV_MPIPE_NUM_NOTIF_GROUPS (MPIPE_NUM_NOTIF_GROUPS) + +/** Number of buckets (4160). */ +#define HV_MPIPE_NUM_BUCKETS (MPIPE_NUM_BUCKETS) + +/** Number of "lo" buckets (4096). */ +#define HV_MPIPE_NUM_LO_BUCKETS 4096 + +/** Number of "hi" buckets (64). */ +#define HV_MPIPE_NUM_HI_BUCKETS \ + (HV_MPIPE_NUM_BUCKETS - HV_MPIPE_NUM_LO_BUCKETS) + +/** Number of edma rings (24). */ +#define HV_MPIPE_NUM_EDMA_RINGS \ + (MPIPE_MMIO_INIT_DAT_GX36_1__EDMA_POST_MASK_WIDTH) + + + + +/** A flag bit indicating a fixed resource allocation. */ +#define HV_MPIPE_ALLOC_FIXED 0x01 + +/** Offset for the config register MMIO region. */ +#define HV_MPIPE_CONFIG_MMIO_OFFSET \ + (MPIPE_MMIO_ADDR__REGION_VAL_CFG << MPIPE_MMIO_ADDR__REGION_SHIFT) + +/** Size of the config register MMIO region. */ +#define HV_MPIPE_CONFIG_MMIO_SIZE (64 * 1024) + +/** Offset for the config register MMIO region. */ +#define HV_MPIPE_FAST_MMIO_OFFSET \ + (MPIPE_MMIO_ADDR__REGION_VAL_IDMA << MPIPE_MMIO_ADDR__REGION_SHIFT) + +/** Size of the fast register MMIO region (IDMA, EDMA, buffer stack). */ +#define HV_MPIPE_FAST_MMIO_SIZE \ + ((MPIPE_MMIO_ADDR__REGION_VAL_BSM + 1 - MPIPE_MMIO_ADDR__REGION_VAL_IDMA) \ + << MPIPE_MMIO_ADDR__REGION_SHIFT) + + +/* + * Each type of resource allocation comes in quantized chunks, where + * XXX_BITS is the number of chunks, and XXX_RES_PER_BIT is the number + * of resources in each chunk. + */ + +/** Number of buffer stack chunks available (32). */ +#define HV_MPIPE_ALLOC_BUFFER_STACKS_BITS \ + MPIPE_MMIO_INIT_DAT_GX36_1__BUFFER_STACK_MASK_WIDTH + +/** Granularity of buffer stack allocation (1). */ +#define HV_MPIPE_ALLOC_BUFFER_STACKS_RES_PER_BIT \ + (HV_MPIPE_NUM_BUFFER_STACKS / HV_MPIPE_ALLOC_BUFFER_STACKS_BITS) + +/** Number of NotifRing chunks available (32). */ +#define HV_MPIPE_ALLOC_NOTIF_RINGS_BITS \ + MPIPE_MMIO_INIT_DAT_GX36_0__NOTIF_RING_MASK_WIDTH + +/** Granularity of NotifRing allocation (8). */ +#define HV_MPIPE_ALLOC_NOTIF_RINGS_RES_PER_BIT \ + (HV_MPIPE_NUM_NOTIF_RINGS / HV_MPIPE_ALLOC_NOTIF_RINGS_BITS) + +/** Number of NotifGroup chunks available (32). */ +#define HV_MPIPE_ALLOC_NOTIF_GROUPS_BITS \ + HV_MPIPE_NUM_NOTIF_GROUPS + +/** Granularity of NotifGroup allocation (1). */ +#define HV_MPIPE_ALLOC_NOTIF_GROUPS_RES_PER_BIT \ + (HV_MPIPE_NUM_NOTIF_GROUPS / HV_MPIPE_ALLOC_NOTIF_GROUPS_BITS) + +/** Number of lo bucket chunks available (16). */ +#define HV_MPIPE_ALLOC_LO_BUCKETS_BITS \ + MPIPE_MMIO_INIT_DAT_GX36_0__BUCKET_RELEASE_MASK_LO_WIDTH + +/** Granularity of lo bucket allocation (256). */ +#define HV_MPIPE_ALLOC_LO_BUCKETS_RES_PER_BIT \ + (HV_MPIPE_NUM_LO_BUCKETS / HV_MPIPE_ALLOC_LO_BUCKETS_BITS) + +/** Number of hi bucket chunks available (16). */ +#define HV_MPIPE_ALLOC_HI_BUCKETS_BITS \ + MPIPE_MMIO_INIT_DAT_GX36_0__BUCKET_RELEASE_MASK_HI_WIDTH + +/** Granularity of hi bucket allocation (4). */ +#define HV_MPIPE_ALLOC_HI_BUCKETS_RES_PER_BIT \ + (HV_MPIPE_NUM_HI_BUCKETS / HV_MPIPE_ALLOC_HI_BUCKETS_BITS) + +/** Number of eDMA ring chunks available (24). */ +#define HV_MPIPE_ALLOC_EDMA_RINGS_BITS \ + MPIPE_MMIO_INIT_DAT_GX36_1__EDMA_POST_MASK_WIDTH + +/** Granularity of eDMA ring allocation (1). */ +#define HV_MPIPE_ALLOC_EDMA_RINGS_RES_PER_BIT \ + (HV_MPIPE_NUM_EDMA_RINGS / HV_MPIPE_ALLOC_EDMA_RINGS_BITS) + + + + +/** Bit vector encoding which NotifRings are in a NotifGroup. */ +typedef struct +{ + /** The actual bits. */ + uint64_t ring_mask[4]; + +} gxio_mpipe_notif_group_bits_t; + + +/** Another name for MPIPE_LBL_INIT_DAT_BSTS_TBL_t. */ +typedef MPIPE_LBL_INIT_DAT_BSTS_TBL_t gxio_mpipe_bucket_info_t; + + + +/** Eight buffer stack ids. */ +typedef struct +{ + /** The stacks. */ + uint8_t stacks[8]; + +} gxio_mpipe_rules_stacks_t; + + +/** A destination mac address. */ +typedef struct +{ + /** The octets. */ + uint8_t octets[6]; + +} gxio_mpipe_rules_dmac_t; + + +/** A vlan. */ +typedef uint16_t gxio_mpipe_rules_vlan_t; + + + +/** Maximum number of characters in a link name. */ +#define GXIO_MPIPE_LINK_NAME_LEN 32 + + +/** Structure holding a link name. Only needed, and only typedef'ed, + * because the IORPC stub generator only handles types which are single + * words coming before the parameter name. */ +typedef struct +{ + /** The name itself. */ + char name[GXIO_MPIPE_LINK_NAME_LEN]; +} +_gxio_mpipe_link_name_t; + +/** Maximum number of characters in a symbol name. */ +#define GXIO_MPIPE_SYMBOL_NAME_LEN 128 + + +/** Structure holding a symbol name. Only needed, and only typedef'ed, + * because the IORPC stub generator only handles types which are single + * words coming before the parameter name. */ +typedef struct +{ + /** The name itself. */ + char name[GXIO_MPIPE_SYMBOL_NAME_LEN]; +} +_gxio_mpipe_symbol_name_t; + + +/** Structure holding a MAC address. */ +typedef struct +{ + /** The address. */ + uint8_t mac[6]; +} +_gxio_mpipe_link_mac_t; + + + +/** Request shared data permission -- that is, the ability to send and + * receive packets -- on the specified link. Other processes may also + * request shared data permission on the same link. + * + * No more than one of ::GXIO_MPIPE_LINK_DATA, ::GXIO_MPIPE_LINK_NO_DATA, + * or ::GXIO_MPIPE_LINK_EXCL_DATA may be specifed in a gxio_mpipe_link_open() + * call. If none are specified, ::GXIO_MPIPE_LINK_DATA is assumed. + */ +#define GXIO_MPIPE_LINK_DATA 0x00000001UL + +/** Do not request data permission on the specified link. + * + * No more than one of ::GXIO_MPIPE_LINK_DATA, ::GXIO_MPIPE_LINK_NO_DATA, + * or ::GXIO_MPIPE_LINK_EXCL_DATA may be specifed in a gxio_mpipe_link_open() + * call. If none are specified, ::GXIO_MPIPE_LINK_DATA is assumed. + */ +#define GXIO_MPIPE_LINK_NO_DATA 0x00000002UL + +/** Request exclusive data permission -- that is, the ability to send and + * receive packets -- on the specified link. No other processes may + * request data permission on this link, and if any process already has + * data permission on it, this open will fail. + * + * No more than one of ::GXIO_MPIPE_LINK_DATA, ::GXIO_MPIPE_LINK_NO_DATA, + * or ::GXIO_MPIPE_LINK_EXCL_DATA may be specifed in a gxio_mpipe_link_open() + * call. If none are specified, ::GXIO_MPIPE_LINK_DATA is assumed. + */ +#define GXIO_MPIPE_LINK_EXCL_DATA 0x00000004UL + +/** Request shared stats permission -- that is, the ability to read and write + * registers which contain link statistics, and to get link attributes -- + * on the specified link. Other processes may also request shared stats + * permission on the same link. + * + * No more than one of ::GXIO_MPIPE_LINK_STATS, ::GXIO_MPIPE_LINK_NO_STATS, + * or ::GXIO_MPIPE_LINK_EXCL_STATS may be specifed in a gxio_mpipe_link_open() + * call. If none are specified, ::GXIO_MPIPE_LINK_STATS is assumed. + */ +#define GXIO_MPIPE_LINK_STATS 0x00000008UL + +/** Do not request stats permission on the specified link. + * + * No more than one of ::GXIO_MPIPE_LINK_STATS, ::GXIO_MPIPE_LINK_NO_STATS, + * or ::GXIO_MPIPE_LINK_EXCL_STATS may be specifed in a gxio_mpipe_link_open() + * call. If none are specified, ::GXIO_MPIPE_LINK_STATS is assumed. + */ +#define GXIO_MPIPE_LINK_NO_STATS 0x00000010UL + +/** Request exclusive stats permission -- that is, the ability to read and + * write registers which contain link statistics, and to get link + * attributes -- on the specified link. No other processes may request + * stats permission on this link, and if any process already + * has stats permission on it, this open will fail. + * + * Requesting exclusive stats permission is normally a very bad idea, since + * it prevents programs like mpipe-stat from providing information on this + * link. Applications should only do this if they use MAC statistics + * registers, and cannot tolerate any of the clear-on-read registers being + * reset by other statistics programs. + * + * No more than one of ::GXIO_MPIPE_LINK_STATS, ::GXIO_MPIPE_LINK_NO_STATS, + * or ::GXIO_MPIPE_LINK_EXCL_STATS may be specifed in a gxio_mpipe_link_open() + * call. If none are specified, ::GXIO_MPIPE_LINK_STATS is assumed. + */ +#define GXIO_MPIPE_LINK_EXCL_STATS 0x00000020UL + +/** Request shared control permission -- that is, the ability to modify link + * attributes, and read and write MAC and MDIO registers -- on the + * specified link. Other processes may also request shared control + * permission on the same link. + * + * No more than one of ::GXIO_MPIPE_LINK_CTL, ::GXIO_MPIPE_LINK_NO_CTL, + * or ::GXIO_MPIPE_LINK_EXCL_CTL may be specifed in a gxio_mpipe_link_open() + * call. If none are specified, ::GXIO_MPIPE_LINK_CTL is assumed. + */ +#define GXIO_MPIPE_LINK_CTL 0x00000040UL + +/** Do not request control permission on the specified link. + * + * No more than one of ::GXIO_MPIPE_LINK_CTL, ::GXIO_MPIPE_LINK_NO_CTL, + * or ::GXIO_MPIPE_LINK_EXCL_CTL may be specifed in a gxio_mpipe_link_open() + * call. If none are specified, ::GXIO_MPIPE_LINK_CTL is assumed. + */ +#define GXIO_MPIPE_LINK_NO_CTL 0x00000080UL + +/** Request exclusive control permission -- that is, the ability to modify + * link attributes, and read and write MAC and MDIO registers -- on the + * specified link. No other processes may request control permission on + * this link, and if any process already has control permission on it, + * this open will fail. + * + * Requesting exclusive control permission is not always a good idea, since + * it prevents programs like mpipe-link from configuring the link. + * + * No more than one of ::GXIO_MPIPE_LINK_CTL, ::GXIO_MPIPE_LINK_NO_CTL, + * or ::GXIO_MPIPE_LINK_EXCL_CTL may be specifed in a gxio_mpipe_link_open() + * call. If none are specified, ::GXIO_MPIPE_LINK_CTL is assumed. + */ +#define GXIO_MPIPE_LINK_EXCL_CTL 0x00000100UL + +/** Set the desired state of the link to up, allowing any speeds which are + * supported by the link hardware, as part of this open operation; do not + * change the desired state of the link when it is closed or the process + * exits. No more than one of ::GXIO_MPIPE_LINK_AUTO_UP, + * ::GXIO_MPIPE_LINK_AUTO_UPDOWN, ::GXIO_MPIPE_LINK_AUTO_DOWN, or + * ::GXIO_MPIPE_LINK_AUTO_NONE may be specifed in a gxio_mpipe_link_open() + * call. If none are specified, ::GXIO_MPIPE_LINK_AUTO_UPDOWN is assumed. + */ +#define GXIO_MPIPE_LINK_AUTO_UP 0x00000200UL + +/** Set the desired state of the link to up, allowing any speeds which are + * supported by the link hardware, as part of this open operation; when the + * link is closed or this process exits, if no other process has the link + * open, set the desired state of the link to down. No more than one of + * ::GXIO_MPIPE_LINK_AUTO_UP, ::GXIO_MPIPE_LINK_AUTO_UPDOWN, + * ::GXIO_MPIPE_LINK_AUTO_DOWN, or ::GXIO_MPIPE_LINK_AUTO_NONE may be + * specifed in a gxio_mpipe_link_open() call. If none are specified, + * ::GXIO_MPIPE_LINK_AUTO_UPDOWN is assumed. + */ +#define GXIO_MPIPE_LINK_AUTO_UPDOWN 0x00000400UL + +/** Do not change the desired state of the link as part of the open + * operation; when the link is closed or this process exits, if no other + * process has the link open, set the desired state of the link to down. + * No more than one of ::GXIO_MPIPE_LINK_AUTO_UP, + * ::GXIO_MPIPE_LINK_AUTO_UPDOWN, ::GXIO_MPIPE_LINK_AUTO_DOWN, or + * ::GXIO_MPIPE_LINK_AUTO_NONE may be specifed in a gxio_mpipe_link_open() + * call. If none are specified, ::GXIO_MPIPE_LINK_AUTO_UPDOWN is assumed. + */ +#define GXIO_MPIPE_LINK_AUTO_DOWN 0x00000800UL + +/** Do not change the desired state of the link as part of the open + * operation; do not change the desired state of the link when it is + * closed or the process exits. No more than one of + * ::GXIO_MPIPE_LINK_AUTO_UP, ::GXIO_MPIPE_LINK_AUTO_UPDOWN, + * ::GXIO_MPIPE_LINK_AUTO_DOWN, or ::GXIO_MPIPE_LINK_AUTO_NONE may be + * specifed in a gxio_mpipe_link_open() call. If none are specified, + * ::GXIO_MPIPE_LINK_AUTO_UPDOWN is assumed. + */ +#define GXIO_MPIPE_LINK_AUTO_NONE 0x00001000UL + +/** Request that this open call not complete until the network link is up. + * The process will wait as long as necessary for this to happen; + * applications which wish to abandon waiting for the link after a + * specific time period should not specify this flag when opening a link, + * but should instead call gxio_mpipe_link_wait() afterward. The link + * must be opened with stats permission. Note that this flag by itself + * does not change the desired link state; if other open flags or previous + * link state changes have not requested a desired state of up, the open + * call will never complete. This flag is not available to kernel + * clients. + */ +#define GXIO_MPIPE_LINK_WAIT 0x00002000UL + + +/* + * Note: link attributes must fit in 24 bits, since we use the top 8 bits + * of the IORPC offset word for the channel number. + */ + +/** Determine whether jumbo frames may be received. If this attribute's + * value value is nonzero, the MAC will accept frames of up to 10240 bytes. + * If the value is zero, the MAC will only accept frames of up to 1544 + * bytes. The default value is zero. */ +#define GXIO_MPIPE_LINK_RECEIVE_JUMBO 0x010000 + +/** Determine whether to send pause frames on this link if the mPIPE packet + * FIFO is nearly full. If the value is zero, pause frames are not sent. + * If the value is nonzero, it is the delay value which will be sent in any + * pause frames which are output, in units of 512 bit times. + * + * Bear in mind that in almost all circumstances, the mPIPE packet FIFO + * will never fill up, since mPIPE will empty it as fast as or faster than + * the incoming data rate, by either delivering or dropping packets. The + * only situation in which this is not true is if the memory and cache + * subsystem is extremely heavily loaded, and mPIPE cannot perform DMA of + * packet data to memory in a timely fashion. In particular, pause frames + * will not be sent if packets cannot be delivered because + * NotifRings are full, buckets are full, or buffers are not available in + * a buffer stack. */ +#define GXIO_MPIPE_LINK_SEND_PAUSE 0x020000 + +/** Determine whether to suspend output on the receipt of pause frames. + * If the value is nonzero, mPIPE shim will suspend output on the link's + * channel when a pause frame is received. If the value is zero, pause + * frames will be ignored. The default value is zero. */ +#define GXIO_MPIPE_LINK_RECEIVE_PAUSE 0x030000 + +/** Interface MAC address. The value is a 6-byte MAC address, in the least + * significant 48 bits of the value; in other words, an address which would + * be printed as '12:34:56:78:90:AB' in IEEE 802 canonical format would + * be returned as 0x12345678ab. + * + * Depending upon the overall system design, a MAC address may or may not + * be available for each interface. Note that the interface's MAC address + * does not limit the packets received on its channel, although the + * classifier's rules could be configured to do that. Similarly, the MAC + * address is not used when transmitting packets, although applications + * could certainly decide to use the assigned address as a source MAC + * address when doing so. This attribute may only be retrieved with + * gxio_mpipe_link_get_attr(); it may not be modified. + */ +#define GXIO_MPIPE_LINK_MAC 0x040000 + +/** Determine whether to discard egress packets on link down. If this value + * is nonzero, packets sent on this link while the link is down will be + * discarded. If this value is zero, no packets will be sent on this link + * while it is down. The default value is one. */ +#define GXIO_MPIPE_LINK_DISCARD_IF_DOWN 0x050000 + +/** Possible link state. The value is a combination of link state flags, + * ORed together, that indicate link modes which are actually supported by + * the hardware. This attribute may only be retrieved with + * gxio_mpipe_link_get_attr(); it may not be modified. */ +#define GXIO_MPIPE_LINK_POSSIBLE_STATE 0x060000 + +/** Current link state. The value is a combination of link state flags, + * ORed together, that indicate the current state of the hardware. If the + * link is down, the value ANDed with ::GXIO_MPIPE_LINK_SPEED will be zero; + * if the link is up, the value ANDed with ::GXIO_MPIPE_LINK_SPEED will + * result in exactly one of the speed values, indicating the current speed. + * This attribute may only be retrieved with gxio_mpipe_link_get_attr(); it + * may not be modified. */ +#define GXIO_MPIPE_LINK_CURRENT_STATE 0x070000 + +/** Desired link state. The value is a conbination of flags, which specify + * the desired state for the link. With gxio_mpipe_link_set_attr(), this + * will, in the background, attempt to bring up the link using whichever of + * the requested flags are reasonable, or take down the link if the flags + * are zero. The actual link up or down operation may happen after this + * call completes. If the link state changes in the future, the system + * will continue to try to get back to the desired link state; for + * instance, if the link is brought up successfully, and then the network + * cable is disconnected, the link will go down. However, the desired + * state of the link is still up, so if the cable is reconnected, the link + * will be brought up again. + * + * With gxio_mpipe_link_set_attr(), this will indicate the desired state + * for the link, as set with a previous gxio_mpipe_link_set_attr() call, + * or implicitly by a gxio_mpipe_link_open() or link close operation. + * This may not reflect the current state of the link; to get that, use + * ::GXIO_MPIPE_LINK_CURRENT_STATE. + */ +#define GXIO_MPIPE_LINK_DESIRED_STATE 0x080000 + + + +/** Link can run, should run, or is running at 10 Mbps. */ +#define GXIO_MPIPE_LINK_10M 0x0000000000000001UL + +/** Link can run, should run, or is running at 100 Mbps. */ +#define GXIO_MPIPE_LINK_100M 0x0000000000000002UL + +/** Link can run, should run, or is running at 1 Gbps. */ +#define GXIO_MPIPE_LINK_1G 0x0000000000000004UL + +/** Link can run, should run, or is running at 10 Gbps. */ +#define GXIO_MPIPE_LINK_10G 0x0000000000000008UL + +/** Link can run, should run, or is running at 20 Gbps. */ +#define GXIO_MPIPE_LINK_20G 0x0000000000000010UL + +/** Link can run, should run, or is running at 25 Gbps. */ +#define GXIO_MPIPE_LINK_25G 0x0000000000000020UL + +/** Link can run, should run, or is running at 50 Gbps. */ +#define GXIO_MPIPE_LINK_50G 0x0000000000000040UL + +/** Link should run at the highest speed supported by the link and by + * the device connected to the link. Only usable as a value for + * the link's desired state; never returned as a value for the current + * or possible states. */ +#define GXIO_MPIPE_LINK_ANYSPEED 0x0000000000000800UL + +/** All legal link speeds. This value is provided for use in extracting + * the speed-related subset of the link state flags; it is not intended + * to be set directly as a value for one of the GXIO_MPIPE_LINK_xxx_STATE + * attributes. A link is up or is requested to be up if its current or + * desired state, respectively, ANDED with this value, is nonzero. */ +#define GXIO_MPIPE_LINK_SPEED_MASK 0x0000000000000FFFUL + +/** Link can run, should run, or is running in MAC loopback mode. This + * loops transmitted packets back to the receiver, inside the Tile + * Processor. */ +#define GXIO_MPIPE_LINK_LOOP_MAC 0x0000000000001000UL + +/** Link can run, should run, or is running in PHY loopback mode. This + * loops transmitted packets back to the receiver, inside the external + * PHY chip. */ +#define GXIO_MPIPE_LINK_LOOP_PHY 0x0000000000002000UL + +/** Link can run, should run, or is running in external loopback mode. + * This requires that an external loopback plug be installed on the + * Ethernet port. Note that only some links require that this be + * configured via the gxio_mpipe_link routines; other links can do + * external loopack with the plug and no special configuration. */ +#define GXIO_MPIPE_LINK_LOOP_EXT 0x0000000000004000UL + +/** All legal loopback types. */ +#define GXIO_MPIPE_LINK_LOOP_MASK 0x000000000000F000UL + +/** Link can run, should run, or is running in full-duplex mode. + * If neither ::GXIO_MPIPE_LINK_FDX nor ::GXIO_MPIPE_LINK_HDX are + * specified in a set of desired state flags, both are assumed. */ +#define GXIO_MPIPE_LINK_FDX 0x0000000000010000UL + +/** Link can run, should run, or is running in half-duplex mode. + * If neither ::GXIO_MPIPE_LINK_FDX nor ::GXIO_MPIPE_LINK_HDX are + * specified in a set of desired state flags, both are assumed. */ +#define GXIO_MPIPE_LINK_HDX 0x0000000000020000UL + + +/** An individual rule. */ +typedef struct +{ + /** The total size. */ + uint16_t size; + + /** The priority. */ + int16_t priority; + + /** The "headroom" in each buffer. */ + uint8_t headroom; + + /** The "tailroom" in each buffer. */ + uint8_t tailroom; + + /** The "capacity" of the largest buffer. */ + uint16_t capacity; + + /** The mask for converting a flow hash into a bucket. */ + uint16_t bucket_mask; + + /** The offset for converting a flow hash into a bucket. */ + uint16_t bucket_first; + + /** The buffer stack ids. */ + gxio_mpipe_rules_stacks_t stacks; + + /** The actual channels. */ + uint32_t channel_bits; + + /** The number of dmacs. */ + uint16_t num_dmacs; + + /** The number of vlans. */ + uint16_t num_vlans; + + /** The actual dmacs and vlans. */ + uint8_t dmacs_and_vlans[]; + +} gxio_mpipe_rules_rule_t; + + +/** A list of classifier rules. */ +typedef struct +{ + /** The offset to the end of the current rule. */ + uint16_t tail; + + /** The offset to the start of the current rule. */ + uint16_t head; + + /** The actual rules. */ + uint8_t rules[4096 - 4]; + +} gxio_mpipe_rules_list_t; + + + + +/** mPIPE statistics structure. These counters include all relevant + * events occurring on all links within the mPIPE shim. */ +typedef struct +{ + /** Number of ingress packets dropped for any reason. */ + uint64_t ingress_drops; + /** Number of ingress packets dropped because a buffer stack was empty. */ + uint64_t ingress_drops_no_buf; + /** Number of ingress packets dropped or truncated due to lack of space in + * the iPkt buffer. */ + uint64_t ingress_drops_ipkt; + /** Number of ingress packets dropped by the classifier or load balancer */ + uint64_t ingress_drops_cls_lb; + /** Total number of ingress packets. */ + uint64_t ingress_packets; + /** Total number of egress packets. */ + uint64_t egress_packets; + /** Total number of ingress bytes. */ + uint64_t ingress_bytes; + /** Total number of egress bytes. */ + uint64_t egress_bytes; +} +gxio_mpipe_stats_t; + + +#endif /* _SYS_HV_DRV_MPIPE_INTF_H */ -- cgit v1.2.3-59-g8ed1b From 10104a1ad670889adc1ae3779df968db621b5dbd Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Sat, 28 Apr 2012 15:41:39 -0400 Subject: arch/tile: break out the "csum a long" function to This makes it available to the tilegx network driver. Signed-off-by: Chris Metcalf --- arch/tile/include/asm/checksum.h | 18 ++++++++++++++++++ arch/tile/lib/checksum.c | 15 +-------------- 2 files changed, 19 insertions(+), 14 deletions(-) diff --git a/arch/tile/include/asm/checksum.h b/arch/tile/include/asm/checksum.h index a120766c7264..b21a2fdec9f7 100644 --- a/arch/tile/include/asm/checksum.h +++ b/arch/tile/include/asm/checksum.h @@ -21,4 +21,22 @@ __wsum do_csum(const unsigned char *buff, int len); #define do_csum do_csum +/* + * Return the sum of all the 16-bit subwords in a long. + * This sums two subwords on a 32-bit machine, and four on 64 bits. + * The implementation does two vector adds to capture any overflow. + */ +static inline unsigned int csum_long(unsigned long x) +{ + unsigned long ret; +#ifdef __tilegx__ + ret = __insn_v2sadu(x, 0); + ret = __insn_v2sadu(ret, 0); +#else + ret = __insn_sadh_u(x, 0); + ret = __insn_sadh_u(ret, 0); +#endif + return ret; +} + #endif /* _ASM_TILE_CHECKSUM_H */ diff --git a/arch/tile/lib/checksum.c b/arch/tile/lib/checksum.c index e4bab5bd3f31..c3ca3e64d9d9 100644 --- a/arch/tile/lib/checksum.c +++ b/arch/tile/lib/checksum.c @@ -16,19 +16,6 @@ #include #include -static inline unsigned int longto16(unsigned long x) -{ - unsigned long ret; -#ifdef __tilegx__ - ret = __insn_v2sadu(x, 0); - ret = __insn_v2sadu(ret, 0); -#else - ret = __insn_sadh_u(x, 0); - ret = __insn_sadh_u(ret, 0); -#endif - return ret; -} - __wsum do_csum(const unsigned char *buff, int len) { int odd, count; @@ -94,7 +81,7 @@ __wsum do_csum(const unsigned char *buff, int len) } if (len & 1) result += *buff; - result = longto16(result); + result = csum_long(result); if (odd) result = swab16(result); out: -- cgit v1.2.3-59-g8ed1b From bce5bbbb23f780a792be7e594af7cd4b4aae1cd4 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Sat, 7 Apr 2012 16:53:03 -0400 Subject: arch/tile: provide kernel support for the tilegx TRIO shim Provide kernel support for the tilegx "Transaction I/O" (TRIO) on-chip hardware. This hardware implements the PCIe interface for tilegx; the driver changes to use TRIO for PCIe are in a subsequent commit. The change is layered on top of the tilegx GXIO IORPC subsystem. Signed-off-by: Chris Metcalf --- arch/tile/gxio/Kconfig | 6 + arch/tile/gxio/Makefile | 1 + arch/tile/gxio/iorpc_trio.c | 327 +++++++++++++++++++++++++++ arch/tile/gxio/trio.c | 49 ++++ arch/tile/include/arch/trio.h | 72 ++++++ arch/tile/include/arch/trio_constants.h | 36 +++ arch/tile/include/arch/trio_def.h | 41 ++++ arch/tile/include/arch/trio_pcie_intfc.h | 229 +++++++++++++++++++ arch/tile/include/arch/trio_pcie_intfc_def.h | 32 +++ arch/tile/include/arch/trio_pcie_rc.h | 156 +++++++++++++ arch/tile/include/arch/trio_pcie_rc_def.h | 24 ++ arch/tile/include/arch/trio_shm.h | 125 ++++++++++ arch/tile/include/arch/trio_shm_def.h | 19 ++ arch/tile/include/gxio/iorpc_trio.h | 97 ++++++++ arch/tile/include/gxio/trio.h | 298 ++++++++++++++++++++++++ arch/tile/include/hv/drv_trio_intf.h | 195 ++++++++++++++++ 16 files changed, 1707 insertions(+) create mode 100644 arch/tile/gxio/iorpc_trio.c create mode 100644 arch/tile/gxio/trio.c create mode 100644 arch/tile/include/arch/trio.h create mode 100644 arch/tile/include/arch/trio_constants.h create mode 100644 arch/tile/include/arch/trio_def.h create mode 100644 arch/tile/include/arch/trio_pcie_intfc.h create mode 100644 arch/tile/include/arch/trio_pcie_intfc_def.h create mode 100644 arch/tile/include/arch/trio_pcie_rc.h create mode 100644 arch/tile/include/arch/trio_pcie_rc_def.h create mode 100644 arch/tile/include/arch/trio_shm.h create mode 100644 arch/tile/include/arch/trio_shm_def.h create mode 100644 arch/tile/include/gxio/iorpc_trio.h create mode 100644 arch/tile/include/gxio/trio.h create mode 100644 arch/tile/include/hv/drv_trio_intf.h diff --git a/arch/tile/gxio/Kconfig b/arch/tile/gxio/Kconfig index 8aeebb70a3df..68e1cca2cce5 100644 --- a/arch/tile/gxio/Kconfig +++ b/arch/tile/gxio/Kconfig @@ -15,3 +15,9 @@ config TILE_GXIO_MPIPE bool select TILE_GXIO select TILE_GXIO_DMA + +# Support direct access to the TILE-Gx TRIO hardware from kernel space. +config TILE_GXIO_TRIO + bool + select TILE_GXIO + select TILE_GXIO_DMA diff --git a/arch/tile/gxio/Makefile b/arch/tile/gxio/Makefile index 130eec48c152..2389ef307c73 100644 --- a/arch/tile/gxio/Makefile +++ b/arch/tile/gxio/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_TILE_GXIO) += iorpc_globals.o kiorpc.o obj-$(CONFIG_TILE_GXIO_DMA) += dma_queue.o obj-$(CONFIG_TILE_GXIO_MPIPE) += mpipe.o iorpc_mpipe.o iorpc_mpipe_info.o +obj-$(CONFIG_TILE_GXIO_TRIO) += trio.o iorpc_trio.o diff --git a/arch/tile/gxio/iorpc_trio.c b/arch/tile/gxio/iorpc_trio.c new file mode 100644 index 000000000000..cef4b2209cda --- /dev/null +++ b/arch/tile/gxio/iorpc_trio.c @@ -0,0 +1,327 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* This file is machine-generated; DO NOT EDIT! */ +#include "gxio/iorpc_trio.h" + +struct alloc_asids_param { + unsigned int count; + unsigned int first; + unsigned int flags; +}; + +int gxio_trio_alloc_asids(gxio_trio_context_t * context, unsigned int count, + unsigned int first, unsigned int flags) +{ + struct alloc_asids_param temp; + struct alloc_asids_param *params = &temp; + + params->count = count; + params->first = first; + params->flags = flags; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), GXIO_TRIO_OP_ALLOC_ASIDS); +} + +EXPORT_SYMBOL(gxio_trio_alloc_asids); + + +struct alloc_memory_maps_param { + unsigned int count; + unsigned int first; + unsigned int flags; +}; + +int gxio_trio_alloc_memory_maps(gxio_trio_context_t * context, + unsigned int count, unsigned int first, + unsigned int flags) +{ + struct alloc_memory_maps_param temp; + struct alloc_memory_maps_param *params = &temp; + + params->count = count; + params->first = first; + params->flags = flags; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), GXIO_TRIO_OP_ALLOC_MEMORY_MAPS); +} + +EXPORT_SYMBOL(gxio_trio_alloc_memory_maps); + + +struct alloc_pio_regions_param { + unsigned int count; + unsigned int first; + unsigned int flags; +}; + +int gxio_trio_alloc_pio_regions(gxio_trio_context_t * context, + unsigned int count, unsigned int first, + unsigned int flags) +{ + struct alloc_pio_regions_param temp; + struct alloc_pio_regions_param *params = &temp; + + params->count = count; + params->first = first; + params->flags = flags; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), GXIO_TRIO_OP_ALLOC_PIO_REGIONS); +} + +EXPORT_SYMBOL(gxio_trio_alloc_pio_regions); + +struct init_pio_region_aux_param { + unsigned int pio_region; + unsigned int mac; + uint32_t bus_address_hi; + unsigned int flags; +}; + +int gxio_trio_init_pio_region_aux(gxio_trio_context_t * context, + unsigned int pio_region, unsigned int mac, + uint32_t bus_address_hi, unsigned int flags) +{ + struct init_pio_region_aux_param temp; + struct init_pio_region_aux_param *params = &temp; + + params->pio_region = pio_region; + params->mac = mac; + params->bus_address_hi = bus_address_hi; + params->flags = flags; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), GXIO_TRIO_OP_INIT_PIO_REGION_AUX); +} + +EXPORT_SYMBOL(gxio_trio_init_pio_region_aux); + + +struct init_memory_map_mmu_aux_param { + unsigned int map; + unsigned long va; + uint64_t size; + unsigned int asid; + unsigned int mac; + uint64_t bus_address; + unsigned int node; + unsigned int order_mode; +}; + +int gxio_trio_init_memory_map_mmu_aux(gxio_trio_context_t * context, + unsigned int map, unsigned long va, + uint64_t size, unsigned int asid, + unsigned int mac, uint64_t bus_address, + unsigned int node, + unsigned int order_mode) +{ + struct init_memory_map_mmu_aux_param temp; + struct init_memory_map_mmu_aux_param *params = &temp; + + params->map = map; + params->va = va; + params->size = size; + params->asid = asid; + params->mac = mac; + params->bus_address = bus_address; + params->node = node; + params->order_mode = order_mode; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), + GXIO_TRIO_OP_INIT_MEMORY_MAP_MMU_AUX); +} + +EXPORT_SYMBOL(gxio_trio_init_memory_map_mmu_aux); + +struct get_port_property_param { + struct pcie_trio_ports_property trio_ports; +}; + +int gxio_trio_get_port_property(gxio_trio_context_t * context, + struct pcie_trio_ports_property *trio_ports) +{ + int __result; + struct get_port_property_param temp; + struct get_port_property_param *params = &temp; + + __result = + hv_dev_pread(context->fd, 0, (HV_VirtAddr) params, sizeof(*params), + GXIO_TRIO_OP_GET_PORT_PROPERTY); + *trio_ports = params->trio_ports; + + return __result; +} + +EXPORT_SYMBOL(gxio_trio_get_port_property); + +struct config_legacy_intr_param { + union iorpc_interrupt interrupt; + unsigned int mac; + unsigned int intx; +}; + +int gxio_trio_config_legacy_intr(gxio_trio_context_t * context, int inter_x, + int inter_y, int inter_ipi, int inter_event, + unsigned int mac, unsigned int intx) +{ + struct config_legacy_intr_param temp; + struct config_legacy_intr_param *params = &temp; + + params->interrupt.kernel.x = inter_x; + params->interrupt.kernel.y = inter_y; + params->interrupt.kernel.ipi = inter_ipi; + params->interrupt.kernel.event = inter_event; + params->mac = mac; + params->intx = intx; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), GXIO_TRIO_OP_CONFIG_LEGACY_INTR); +} + +EXPORT_SYMBOL(gxio_trio_config_legacy_intr); + +struct config_msi_intr_param { + union iorpc_interrupt interrupt; + unsigned int mac; + unsigned int mem_map; + uint64_t mem_map_base; + uint64_t mem_map_limit; + unsigned int asid; +}; + +int gxio_trio_config_msi_intr(gxio_trio_context_t * context, int inter_x, + int inter_y, int inter_ipi, int inter_event, + unsigned int mac, unsigned int mem_map, + uint64_t mem_map_base, uint64_t mem_map_limit, + unsigned int asid) +{ + struct config_msi_intr_param temp; + struct config_msi_intr_param *params = &temp; + + params->interrupt.kernel.x = inter_x; + params->interrupt.kernel.y = inter_y; + params->interrupt.kernel.ipi = inter_ipi; + params->interrupt.kernel.event = inter_event; + params->mac = mac; + params->mem_map = mem_map; + params->mem_map_base = mem_map_base; + params->mem_map_limit = mem_map_limit; + params->asid = asid; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), GXIO_TRIO_OP_CONFIG_MSI_INTR); +} + +EXPORT_SYMBOL(gxio_trio_config_msi_intr); + + +struct set_mps_mrs_param { + uint16_t mps; + uint16_t mrs; + unsigned int mac; +}; + +int gxio_trio_set_mps_mrs(gxio_trio_context_t * context, uint16_t mps, + uint16_t mrs, unsigned int mac) +{ + struct set_mps_mrs_param temp; + struct set_mps_mrs_param *params = &temp; + + params->mps = mps; + params->mrs = mrs; + params->mac = mac; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), GXIO_TRIO_OP_SET_MPS_MRS); +} + +EXPORT_SYMBOL(gxio_trio_set_mps_mrs); + +struct force_rc_link_up_param { + unsigned int mac; +}; + +int gxio_trio_force_rc_link_up(gxio_trio_context_t * context, unsigned int mac) +{ + struct force_rc_link_up_param temp; + struct force_rc_link_up_param *params = &temp; + + params->mac = mac; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), GXIO_TRIO_OP_FORCE_RC_LINK_UP); +} + +EXPORT_SYMBOL(gxio_trio_force_rc_link_up); + +struct force_ep_link_up_param { + unsigned int mac; +}; + +int gxio_trio_force_ep_link_up(gxio_trio_context_t * context, unsigned int mac) +{ + struct force_ep_link_up_param temp; + struct force_ep_link_up_param *params = &temp; + + params->mac = mac; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), GXIO_TRIO_OP_FORCE_EP_LINK_UP); +} + +EXPORT_SYMBOL(gxio_trio_force_ep_link_up); + +struct get_mmio_base_param { + HV_PTE base; +}; + +int gxio_trio_get_mmio_base(gxio_trio_context_t * context, HV_PTE *base) +{ + int __result; + struct get_mmio_base_param temp; + struct get_mmio_base_param *params = &temp; + + __result = + hv_dev_pread(context->fd, 0, (HV_VirtAddr) params, sizeof(*params), + GXIO_TRIO_OP_GET_MMIO_BASE); + *base = params->base; + + return __result; +} + +EXPORT_SYMBOL(gxio_trio_get_mmio_base); + +struct check_mmio_offset_param { + unsigned long offset; + unsigned long size; +}; + +int gxio_trio_check_mmio_offset(gxio_trio_context_t * context, + unsigned long offset, unsigned long size) +{ + struct check_mmio_offset_param temp; + struct check_mmio_offset_param *params = &temp; + + params->offset = offset; + params->size = size; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), GXIO_TRIO_OP_CHECK_MMIO_OFFSET); +} + +EXPORT_SYMBOL(gxio_trio_check_mmio_offset); diff --git a/arch/tile/gxio/trio.c b/arch/tile/gxio/trio.c new file mode 100644 index 000000000000..69f0b8df3ce3 --- /dev/null +++ b/arch/tile/gxio/trio.c @@ -0,0 +1,49 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* + * Implementation of trio gxio calls. + */ + +#include +#include +#include + +#include +#include +#include +#include + +int gxio_trio_init(gxio_trio_context_t *context, unsigned int trio_index) +{ + char file[32]; + int fd; + + snprintf(file, sizeof(file), "trio/%d/iorpc", trio_index); + fd = hv_dev_open((HV_VirtAddr) file, 0); + if (fd < 0) { + context->fd = -1; + + if (fd >= GXIO_ERR_MIN && fd <= GXIO_ERR_MAX) + return fd; + else + return -ENODEV; + } + + context->fd = fd; + + return 0; +} + +EXPORT_SYMBOL_GPL(gxio_trio_init); diff --git a/arch/tile/include/arch/trio.h b/arch/tile/include/arch/trio.h new file mode 100644 index 000000000000..d3000a871a21 --- /dev/null +++ b/arch/tile/include/arch/trio.h @@ -0,0 +1,72 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* Machine-generated file; do not edit. */ + +#ifndef __ARCH_TRIO_H__ +#define __ARCH_TRIO_H__ + +#include +#include + +#ifndef __ASSEMBLER__ + +/* + * Tile PIO Region Configuration - CFG Address Format. + * This register describes the address format for PIO accesses when the + * associated region is setup with TYPE=CFG. + */ + +__extension__ +typedef union +{ + struct + { +#ifndef __BIG_ENDIAN__ + /* Register Address (full byte address). */ + uint_reg_t reg_addr : 12; + /* Function Number */ + uint_reg_t fn : 3; + /* Device Number */ + uint_reg_t dev : 5; + /* BUS Number */ + uint_reg_t bus : 8; + /* Config Type: 0 for access to directly-attached device. 1 otherwise. */ + uint_reg_t type : 1; + /* Reserved. */ + uint_reg_t __reserved_0 : 1; + /* + * MAC select. This must match the configuration in + * TILE_PIO_REGION_SETUP.MAC. + */ + uint_reg_t mac : 2; + /* Reserved. */ + uint_reg_t __reserved_1 : 32; +#else /* __BIG_ENDIAN__ */ + uint_reg_t __reserved_1 : 32; + uint_reg_t mac : 2; + uint_reg_t __reserved_0 : 1; + uint_reg_t type : 1; + uint_reg_t bus : 8; + uint_reg_t dev : 5; + uint_reg_t fn : 3; + uint_reg_t reg_addr : 12; +#endif + }; + + uint_reg_t word; +} TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR_t; +#endif /* !defined(__ASSEMBLER__) */ + +#endif /* !defined(__ARCH_TRIO_H__) */ diff --git a/arch/tile/include/arch/trio_constants.h b/arch/tile/include/arch/trio_constants.h new file mode 100644 index 000000000000..628b045436b8 --- /dev/null +++ b/arch/tile/include/arch/trio_constants.h @@ -0,0 +1,36 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + + +#ifndef __ARCH_TRIO_CONSTANTS_H__ +#define __ARCH_TRIO_CONSTANTS_H__ + +#define TRIO_NUM_ASIDS 16 +#define TRIO_NUM_TLBS_PER_ASID 16 + +#define TRIO_NUM_TPIO_REGIONS 8 +#define TRIO_LOG2_NUM_TPIO_REGIONS 3 + +#define TRIO_NUM_MAP_MEM_REGIONS 16 +#define TRIO_LOG2_NUM_MAP_MEM_REGIONS 4 +#define TRIO_NUM_MAP_SQ_REGIONS 8 +#define TRIO_LOG2_NUM_MAP_SQ_REGIONS 3 + +#define TRIO_LOG2_NUM_SQ_FIFO_ENTRIES 6 + +#define TRIO_NUM_PUSH_DMA_RINGS 32 + +#define TRIO_NUM_PULL_DMA_RINGS 32 + +#endif /* __ARCH_TRIO_CONSTANTS_H__ */ diff --git a/arch/tile/include/arch/trio_def.h b/arch/tile/include/arch/trio_def.h new file mode 100644 index 000000000000..e80500317dc4 --- /dev/null +++ b/arch/tile/include/arch/trio_def.h @@ -0,0 +1,41 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* Machine-generated file; do not edit. */ + +#ifndef __ARCH_TRIO_DEF_H__ +#define __ARCH_TRIO_DEF_H__ +#define TRIO_CFG_REGION_ADDR__REG_SHIFT 0 +#define TRIO_CFG_REGION_ADDR__INTFC_SHIFT 16 +#define TRIO_CFG_REGION_ADDR__INTFC_VAL_TRIO 0x0 +#define TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE 0x1 +#define TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_STANDARD 0x2 +#define TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_PROTECTED 0x3 +#define TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT 18 +#define TRIO_CFG_REGION_ADDR__PROT_SHIFT 20 +#define TRIO_PIO_REGIONS_ADDR__REGION_SHIFT 32 +#define TRIO_MAP_MEM_REG_INT0 0x1000000000 +#define TRIO_MAP_MEM_REG_INT1 0x1000000008 +#define TRIO_MAP_MEM_REG_INT2 0x1000000010 +#define TRIO_MAP_MEM_REG_INT3 0x1000000018 +#define TRIO_MAP_MEM_REG_INT4 0x1000000020 +#define TRIO_MAP_MEM_REG_INT5 0x1000000028 +#define TRIO_MAP_MEM_REG_INT6 0x1000000030 +#define TRIO_MAP_MEM_REG_INT7 0x1000000038 +#define TRIO_MAP_MEM_LIM__ADDR_SHIFT 12 +#define TRIO_MAP_MEM_SETUP__ORDER_MODE_VAL_UNORDERED 0x0 +#define TRIO_MAP_MEM_SETUP__ORDER_MODE_VAL_STRICT 0x1 +#define TRIO_MAP_MEM_SETUP__ORDER_MODE_VAL_REL_ORD 0x2 +#define TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT 30 +#endif /* !defined(__ARCH_TRIO_DEF_H__) */ diff --git a/arch/tile/include/arch/trio_pcie_intfc.h b/arch/tile/include/arch/trio_pcie_intfc.h new file mode 100644 index 000000000000..0487fdb9d581 --- /dev/null +++ b/arch/tile/include/arch/trio_pcie_intfc.h @@ -0,0 +1,229 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* Machine-generated file; do not edit. */ + +#ifndef __ARCH_TRIO_PCIE_INTFC_H__ +#define __ARCH_TRIO_PCIE_INTFC_H__ + +#include +#include + +#ifndef __ASSEMBLER__ + +/* + * Port Configuration. + * Configuration of the PCIe Port + */ + +__extension__ +typedef union +{ + struct + { +#ifndef __BIG_ENDIAN__ + /* Provides the state of the strapping pins for this port. */ + uint_reg_t strap_state : 3; + /* Reserved. */ + uint_reg_t __reserved_0 : 1; + /* + * When 1, the device type will be overridden using OVD_DEV_TYPE_VAL. + * When 0, the device type is determined based on the STRAP_STATE. + */ + uint_reg_t ovd_dev_type : 1; + /* Provides the device type when OVD_DEV_TYPE is 1. */ + uint_reg_t ovd_dev_type_val : 4; + /* Determines how link is trained. */ + uint_reg_t train_mode : 2; + /* Reserved. */ + uint_reg_t __reserved_1 : 1; + /* + * For PCIe, used to flip physical RX lanes that were not properly wired. + * This is not the same as lane reversal which is handled automatically + * during link training. When 0, RX Lane0 must be wired to the link + * partner (either to its Lane0 or it's LaneN). When RX_LANE_FLIP is 1, + * the highest numbered lane for this port becomes Lane0 and Lane0 does + * NOT have to be wired to the link partner. + */ + uint_reg_t rx_lane_flip : 1; + /* + * For PCIe, used to flip physical TX lanes that were not properly wired. + * This is not the same as lane reversal which is handled automatically + * during link training. When 0, TX Lane0 must be wired to the link + * partner (either to its Lane0 or it's LaneN). When TX_LANE_FLIP is 1, + * the highest numbered lane for this port becomes Lane0 and Lane0 does + * NOT have to be wired to the link partner. + */ + uint_reg_t tx_lane_flip : 1; + /* + * For StreamIO port, configures the width of the port when TRAIN_MODE is + * not STRAP. + */ + uint_reg_t stream_width : 2; + /* + * For StreamIO port, configures the rate of the port when TRAIN_MODE is + * not STRAP. + */ + uint_reg_t stream_rate : 2; + /* Reserved. */ + uint_reg_t __reserved_2 : 46; +#else /* __BIG_ENDIAN__ */ + uint_reg_t __reserved_2 : 46; + uint_reg_t stream_rate : 2; + uint_reg_t stream_width : 2; + uint_reg_t tx_lane_flip : 1; + uint_reg_t rx_lane_flip : 1; + uint_reg_t __reserved_1 : 1; + uint_reg_t train_mode : 2; + uint_reg_t ovd_dev_type_val : 4; + uint_reg_t ovd_dev_type : 1; + uint_reg_t __reserved_0 : 1; + uint_reg_t strap_state : 3; +#endif + }; + + uint_reg_t word; +} TRIO_PCIE_INTFC_PORT_CONFIG_t; + +/* + * Port Status. + * Status of the PCIe Port. This register applies to the StreamIO port when + * StreamIO is enabled. + */ + +__extension__ +typedef union +{ + struct + { +#ifndef __BIG_ENDIAN__ + /* + * Indicates the DL state of the port. When 1, the port is up and ready + * to receive traffic. + */ + uint_reg_t dl_up : 1; + /* + * Indicates the number of times the link has gone down. Clears on read. + */ + uint_reg_t dl_down_cnt : 7; + /* Indicates the SERDES PLL has spun up and is providing a valid clock. */ + uint_reg_t clock_ready : 1; + /* Reserved. */ + uint_reg_t __reserved_0 : 7; + /* Device revision ID. */ + uint_reg_t device_rev : 8; + /* Link state (PCIe). */ + uint_reg_t ltssm_state : 6; + /* Link power management state (PCIe). */ + uint_reg_t pm_state : 3; + /* Reserved. */ + uint_reg_t __reserved_1 : 31; +#else /* __BIG_ENDIAN__ */ + uint_reg_t __reserved_1 : 31; + uint_reg_t pm_state : 3; + uint_reg_t ltssm_state : 6; + uint_reg_t device_rev : 8; + uint_reg_t __reserved_0 : 7; + uint_reg_t clock_ready : 1; + uint_reg_t dl_down_cnt : 7; + uint_reg_t dl_up : 1; +#endif + }; + + uint_reg_t word; +} TRIO_PCIE_INTFC_PORT_STATUS_t; + +/* + * Transmit FIFO Control. + * Contains TX FIFO thresholds. These registers are for diagnostics purposes + * only. Changing these values causes undefined behavior. + */ + +__extension__ +typedef union +{ + struct + { +#ifndef __BIG_ENDIAN__ + /* + * Almost-Empty level for TX0 data. Typically set to at least + * roundup(38.0*M/N) where N=tclk frequency and M=MAC symbol rate in MHz + * for a x4 port (250MHz). + */ + uint_reg_t tx0_data_ae_lvl : 7; + /* Reserved. */ + uint_reg_t __reserved_0 : 1; + /* Almost-Empty level for TX1 data. */ + uint_reg_t tx1_data_ae_lvl : 7; + /* Reserved. */ + uint_reg_t __reserved_1 : 1; + /* Almost-Full level for TX0 data. */ + uint_reg_t tx0_data_af_lvl : 7; + /* Reserved. */ + uint_reg_t __reserved_2 : 1; + /* Almost-Full level for TX1 data. */ + uint_reg_t tx1_data_af_lvl : 7; + /* Reserved. */ + uint_reg_t __reserved_3 : 1; + /* Almost-Full level for TX0 info. */ + uint_reg_t tx0_info_af_lvl : 5; + /* Reserved. */ + uint_reg_t __reserved_4 : 3; + /* Almost-Full level for TX1 info. */ + uint_reg_t tx1_info_af_lvl : 5; + /* Reserved. */ + uint_reg_t __reserved_5 : 3; + /* + * This register provides performance adjustment for high bandwidth + * flows. The MAC will assert almost-full to TRIO if non-posted credits + * fall below this level. Note that setting this larger than the initial + * PORT_CREDIT.NPH value will cause READS to never be sent. If the + * initial credit value from the link partner is smaller than this value + * when the link comes up, the value will be reset to the initial credit + * value to prevent lockup. + */ + uint_reg_t min_np_credits : 8; + /* + * This register provides performance adjustment for high bandwidth + * flows. The MAC will assert almost-full to TRIO if posted credits fall + * below this level. Note that setting this larger than the initial + * PORT_CREDIT.PH value will cause WRITES to never be sent. If the + * initial credit value from the link partner is smaller than this value + * when the link comes up, the value will be reset to the initial credit + * value to prevent lockup. + */ + uint_reg_t min_p_credits : 8; +#else /* __BIG_ENDIAN__ */ + uint_reg_t min_p_credits : 8; + uint_reg_t min_np_credits : 8; + uint_reg_t __reserved_5 : 3; + uint_reg_t tx1_info_af_lvl : 5; + uint_reg_t __reserved_4 : 3; + uint_reg_t tx0_info_af_lvl : 5; + uint_reg_t __reserved_3 : 1; + uint_reg_t tx1_data_af_lvl : 7; + uint_reg_t __reserved_2 : 1; + uint_reg_t tx0_data_af_lvl : 7; + uint_reg_t __reserved_1 : 1; + uint_reg_t tx1_data_ae_lvl : 7; + uint_reg_t __reserved_0 : 1; + uint_reg_t tx0_data_ae_lvl : 7; +#endif + }; + + uint_reg_t word; +} TRIO_PCIE_INTFC_TX_FIFO_CTL_t; +#endif /* !defined(__ASSEMBLER__) */ + +#endif /* !defined(__ARCH_TRIO_PCIE_INTFC_H__) */ diff --git a/arch/tile/include/arch/trio_pcie_intfc_def.h b/arch/tile/include/arch/trio_pcie_intfc_def.h new file mode 100644 index 000000000000..d3fd6781fb24 --- /dev/null +++ b/arch/tile/include/arch/trio_pcie_intfc_def.h @@ -0,0 +1,32 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* Machine-generated file; do not edit. */ + +#ifndef __ARCH_TRIO_PCIE_INTFC_DEF_H__ +#define __ARCH_TRIO_PCIE_INTFC_DEF_H__ +#define TRIO_PCIE_INTFC_MAC_INT_STS 0x0000 +#define TRIO_PCIE_INTFC_MAC_INT_STS__INT_LEVEL_MASK 0xf000 +#define TRIO_PCIE_INTFC_PORT_CONFIG 0x0018 +#define TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_DISABLED 0x0 +#define TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_ENDPOINT 0x1 +#define TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_RC 0x2 +#define TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_ENDPOINT_G1 0x3 +#define TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_RC_G1 0x4 +#define TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_XLINK 0x5 +#define TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_STREAM_X1 0x6 +#define TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_STREAM_X4 0x7 +#define TRIO_PCIE_INTFC_PORT_STATUS 0x0020 +#define TRIO_PCIE_INTFC_TX_FIFO_CTL 0x0050 +#endif /* !defined(__ARCH_TRIO_PCIE_INTFC_DEF_H__) */ diff --git a/arch/tile/include/arch/trio_pcie_rc.h b/arch/tile/include/arch/trio_pcie_rc.h new file mode 100644 index 000000000000..6a25d0aca857 --- /dev/null +++ b/arch/tile/include/arch/trio_pcie_rc.h @@ -0,0 +1,156 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* Machine-generated file; do not edit. */ + +#ifndef __ARCH_TRIO_PCIE_RC_H__ +#define __ARCH_TRIO_PCIE_RC_H__ + +#include +#include + +#ifndef __ASSEMBLER__ + +/* Device Capabilities Register. */ + +__extension__ +typedef union +{ + struct + { +#ifndef __BIG_ENDIAN__ + /* + * Max_Payload_Size Supported, writablethrough the MAC_STANDARD interface + */ + uint_reg_t mps_sup : 3; + /* + * This field is writable through the MAC_STANDARD interface. However, + * Phantom Function is not supported. Therefore, the application must + * not write any value other than 0x0 to this field. + */ + uint_reg_t phantom_function_supported : 2; + /* This bit is writable through the MAC_STANDARD interface. */ + uint_reg_t ext_tag_field_supported : 1; + /* Reserved. */ + uint_reg_t __reserved_0 : 3; + /* Endpoint L1 Acceptable Latency Must be 0x0 for non-Endpoint devices. */ + uint_reg_t l1_lat : 3; + /* + * Undefined since PCI Express 1.1 (Was Attention Button Present for PCI + * Express 1.0a) + */ + uint_reg_t r1 : 1; + /* + * Undefined since PCI Express 1.1 (Was Attention Indicator Present for + * PCI Express 1.0a) + */ + uint_reg_t r2 : 1; + /* + * Undefined since PCI Express 1.1 (Was Power Indicator Present for PCI + * Express 1.0a) + */ + uint_reg_t r3 : 1; + /* + * Role-Based Error Reporting, writable through the MAC_STANDARD + * interface. Required to be set for device compliant to 1.1 spec and + * later. + */ + uint_reg_t rer : 1; + /* Reserved. */ + uint_reg_t __reserved_1 : 2; + /* Captured Slot Power Limit Value Upstream port only. */ + uint_reg_t slot_pwr_lim : 8; + /* Captured Slot Power Limit Scale Upstream port only. */ + uint_reg_t slot_pwr_scale : 2; + /* Reserved. */ + uint_reg_t __reserved_2 : 4; + /* Endpoint L0s Acceptable LatencyMust be 0x0 for non-Endpoint devices. */ + uint_reg_t l0s_lat : 1; + /* Reserved. */ + uint_reg_t __reserved_3 : 31; +#else /* __BIG_ENDIAN__ */ + uint_reg_t __reserved_3 : 31; + uint_reg_t l0s_lat : 1; + uint_reg_t __reserved_2 : 4; + uint_reg_t slot_pwr_scale : 2; + uint_reg_t slot_pwr_lim : 8; + uint_reg_t __reserved_1 : 2; + uint_reg_t rer : 1; + uint_reg_t r3 : 1; + uint_reg_t r2 : 1; + uint_reg_t r1 : 1; + uint_reg_t l1_lat : 3; + uint_reg_t __reserved_0 : 3; + uint_reg_t ext_tag_field_supported : 1; + uint_reg_t phantom_function_supported : 2; + uint_reg_t mps_sup : 3; +#endif + }; + + uint_reg_t word; +} TRIO_PCIE_RC_DEVICE_CAP_t; + +/* Device Control Register. */ + +__extension__ +typedef union +{ + struct + { +#ifndef __BIG_ENDIAN__ + /* Correctable Error Reporting Enable */ + uint_reg_t cor_err_ena : 1; + /* Non-Fatal Error Reporting Enable */ + uint_reg_t nf_err_ena : 1; + /* Fatal Error Reporting Enable */ + uint_reg_t fatal_err_ena : 1; + /* Unsupported Request Reporting Enable */ + uint_reg_t ur_ena : 1; + /* Relaxed orderring enable */ + uint_reg_t ro_ena : 1; + /* Max Payload Size */ + uint_reg_t max_payload_size : 3; + /* Extended Tag Field Enable */ + uint_reg_t ext_tag : 1; + /* Phantom Function Enable */ + uint_reg_t ph_fn_ena : 1; + /* AUX Power PM Enable */ + uint_reg_t aux_pm_ena : 1; + /* Enable NoSnoop */ + uint_reg_t no_snoop : 1; + /* Max read request size */ + uint_reg_t max_read_req_sz : 3; + /* Reserved. */ + uint_reg_t __reserved : 49; +#else /* __BIG_ENDIAN__ */ + uint_reg_t __reserved : 49; + uint_reg_t max_read_req_sz : 3; + uint_reg_t no_snoop : 1; + uint_reg_t aux_pm_ena : 1; + uint_reg_t ph_fn_ena : 1; + uint_reg_t ext_tag : 1; + uint_reg_t max_payload_size : 3; + uint_reg_t ro_ena : 1; + uint_reg_t ur_ena : 1; + uint_reg_t fatal_err_ena : 1; + uint_reg_t nf_err_ena : 1; + uint_reg_t cor_err_ena : 1; +#endif + }; + + uint_reg_t word; +} TRIO_PCIE_RC_DEVICE_CONTROL_t; +#endif /* !defined(__ASSEMBLER__) */ + +#endif /* !defined(__ARCH_TRIO_PCIE_RC_H__) */ diff --git a/arch/tile/include/arch/trio_pcie_rc_def.h b/arch/tile/include/arch/trio_pcie_rc_def.h new file mode 100644 index 000000000000..74081a65b6f2 --- /dev/null +++ b/arch/tile/include/arch/trio_pcie_rc_def.h @@ -0,0 +1,24 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* Machine-generated file; do not edit. */ + +#ifndef __ARCH_TRIO_PCIE_RC_DEF_H__ +#define __ARCH_TRIO_PCIE_RC_DEF_H__ +#define TRIO_PCIE_RC_DEVICE_CAP 0x0074 +#define TRIO_PCIE_RC_DEVICE_CONTROL 0x0078 +#define TRIO_PCIE_RC_DEVICE_ID_VEN_ID 0x0000 +#define TRIO_PCIE_RC_DEVICE_ID_VEN_ID__DEV_ID_SHIFT 16 +#define TRIO_PCIE_RC_REVISION_ID 0x0008 +#endif /* !defined(__ARCH_TRIO_PCIE_RC_DEF_H__) */ diff --git a/arch/tile/include/arch/trio_shm.h b/arch/tile/include/arch/trio_shm.h new file mode 100644 index 000000000000..3382e38245af --- /dev/null +++ b/arch/tile/include/arch/trio_shm.h @@ -0,0 +1,125 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* Machine-generated file; do not edit. */ + + +#ifndef __ARCH_TRIO_SHM_H__ +#define __ARCH_TRIO_SHM_H__ + +#include +#include + +#ifndef __ASSEMBLER__ +/** + * TRIO DMA Descriptor. + * The TRIO DMA descriptor is written by software and consumed by hardware. + * It is used to specify the location of transaction data in the IO and Tile + * domains. + */ + +__extension__ +typedef union +{ + struct + { + /* Word 0 */ + +#ifndef __BIG_ENDIAN__ + /** Tile side virtual address. */ + int_reg_t va : 42; + /** + * Encoded size of buffer used on push DMA when C=1: + * 0 = 128 bytes + * 1 = 256 bytes + * 2 = 512 bytes + * 3 = 1024 bytes + * 4 = 1664 bytes + * 5 = 4096 bytes + * 6 = 10368 bytes + * 7 = 16384 bytes + */ + uint_reg_t bsz : 3; + /** + * Chaining designation. Always zero for pull DMA + * 0 : Unchained buffer pointer + * 1 : Chained buffer pointer. Next buffer descriptor (e.g. VA) stored + * in 1st 8-bytes in buffer. For chained buffers, first 8-bytes of each + * buffer contain the next buffer descriptor formatted exactly like a PDE + * buffer descriptor. This allows a chained PDE buffer to be sent using + * push DMA. + */ + uint_reg_t c : 1; + /** + * Notification interrupt will be delivered when the transaction has + * completed (all data has been read from or written to the Tile-side + * buffer). + */ + uint_reg_t notif : 1; + /** + * When 0, the XSIZE field specifies the total byte count for the + * transaction. When 1, the XSIZE field is encoded as 2^(N+14) for N in + * {0..6}: + * 0 = 16KB + * 1 = 32KB + * 2 = 64KB + * 3 = 128KB + * 4 = 256KB + * 5 = 512KB + * 6 = 1MB + * All other encodings of the XSIZE field are reserved when SMOD=1 + */ + uint_reg_t smod : 1; + /** + * Total number of bytes to move for this transaction. When SMOD=1, + * this field is encoded - see SMOD description. + */ + uint_reg_t xsize : 14; + /** Reserved. */ + uint_reg_t __reserved_0 : 1; + /** + * Generation number. Used to indicate a valid descriptor in ring. When + * a new descriptor is written into the ring, software must toggle this + * bit. The net effect is that the GEN bit being written into new + * descriptors toggles each time the ring tail pointer wraps. + */ + uint_reg_t gen : 1; +#else /* __BIG_ENDIAN__ */ + uint_reg_t gen : 1; + uint_reg_t __reserved_0 : 1; + uint_reg_t xsize : 14; + uint_reg_t smod : 1; + uint_reg_t notif : 1; + uint_reg_t c : 1; + uint_reg_t bsz : 3; + int_reg_t va : 42; +#endif + + /* Word 1 */ + +#ifndef __BIG_ENDIAN__ + /** IO-side address */ + uint_reg_t io_address : 64; +#else /* __BIG_ENDIAN__ */ + uint_reg_t io_address : 64; +#endif + + }; + + /** Word access */ + uint_reg_t words[2]; +} TRIO_DMA_DESC_t; +#endif /* !defined(__ASSEMBLER__) */ + +#endif /* !defined(__ARCH_TRIO_SHM_H__) */ diff --git a/arch/tile/include/arch/trio_shm_def.h b/arch/tile/include/arch/trio_shm_def.h new file mode 100644 index 000000000000..72a59c88b06a --- /dev/null +++ b/arch/tile/include/arch/trio_shm_def.h @@ -0,0 +1,19 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* Machine-generated file; do not edit. */ + +#ifndef __ARCH_TRIO_SHM_DEF_H__ +#define __ARCH_TRIO_SHM_DEF_H__ +#endif /* !defined(__ARCH_TRIO_SHM_DEF_H__) */ diff --git a/arch/tile/include/gxio/iorpc_trio.h b/arch/tile/include/gxio/iorpc_trio.h new file mode 100644 index 000000000000..15fb77992083 --- /dev/null +++ b/arch/tile/include/gxio/iorpc_trio.h @@ -0,0 +1,97 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* This file is machine-generated; DO NOT EDIT! */ +#ifndef __GXIO_TRIO_LINUX_RPC_H__ +#define __GXIO_TRIO_LINUX_RPC_H__ + +#include + +#include +#include +#include +#include +#include +#include + +#define GXIO_TRIO_OP_ALLOC_ASIDS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1400) + +#define GXIO_TRIO_OP_ALLOC_MEMORY_MAPS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x1402) + +#define GXIO_TRIO_OP_ALLOC_PIO_REGIONS IORPC_OPCODE(IORPC_FORMAT_NONE, 0x140e) +#define GXIO_TRIO_OP_INIT_PIO_REGION_AUX IORPC_OPCODE(IORPC_FORMAT_NONE, 0x140f) + +#define GXIO_TRIO_OP_INIT_MEMORY_MAP_MMU_AUX IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1417) +#define GXIO_TRIO_OP_GET_PORT_PROPERTY IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1418) +#define GXIO_TRIO_OP_CONFIG_LEGACY_INTR IORPC_OPCODE(IORPC_FORMAT_KERNEL_INTERRUPT, 0x1419) +#define GXIO_TRIO_OP_CONFIG_MSI_INTR IORPC_OPCODE(IORPC_FORMAT_KERNEL_INTERRUPT, 0x141a) + +#define GXIO_TRIO_OP_SET_MPS_MRS IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x141c) +#define GXIO_TRIO_OP_FORCE_RC_LINK_UP IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x141d) +#define GXIO_TRIO_OP_FORCE_EP_LINK_UP IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x141e) +#define GXIO_TRIO_OP_GET_MMIO_BASE IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8000) +#define GXIO_TRIO_OP_CHECK_MMIO_OFFSET IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8001) + +int gxio_trio_alloc_asids(gxio_trio_context_t * context, unsigned int count, + unsigned int first, unsigned int flags); + + +int gxio_trio_alloc_memory_maps(gxio_trio_context_t * context, + unsigned int count, unsigned int first, + unsigned int flags); + + +int gxio_trio_alloc_pio_regions(gxio_trio_context_t * context, + unsigned int count, unsigned int first, + unsigned int flags); + +int gxio_trio_init_pio_region_aux(gxio_trio_context_t * context, + unsigned int pio_region, unsigned int mac, + uint32_t bus_address_hi, unsigned int flags); + + +int gxio_trio_init_memory_map_mmu_aux(gxio_trio_context_t * context, + unsigned int map, unsigned long va, + uint64_t size, unsigned int asid, + unsigned int mac, uint64_t bus_address, + unsigned int node, + unsigned int order_mode); + +int gxio_trio_get_port_property(gxio_trio_context_t * context, + struct pcie_trio_ports_property *trio_ports); + +int gxio_trio_config_legacy_intr(gxio_trio_context_t * context, int inter_x, + int inter_y, int inter_ipi, int inter_event, + unsigned int mac, unsigned int intx); + +int gxio_trio_config_msi_intr(gxio_trio_context_t * context, int inter_x, + int inter_y, int inter_ipi, int inter_event, + unsigned int mac, unsigned int mem_map, + uint64_t mem_map_base, uint64_t mem_map_limit, + unsigned int asid); + + +int gxio_trio_set_mps_mrs(gxio_trio_context_t * context, uint16_t mps, + uint16_t mrs, unsigned int mac); + +int gxio_trio_force_rc_link_up(gxio_trio_context_t * context, unsigned int mac); + +int gxio_trio_force_ep_link_up(gxio_trio_context_t * context, unsigned int mac); + +int gxio_trio_get_mmio_base(gxio_trio_context_t * context, HV_PTE *base); + +int gxio_trio_check_mmio_offset(gxio_trio_context_t * context, + unsigned long offset, unsigned long size); + +#endif /* !__GXIO_TRIO_LINUX_RPC_H__ */ diff --git a/arch/tile/include/gxio/trio.h b/arch/tile/include/gxio/trio.h new file mode 100644 index 000000000000..77b80cdd46d8 --- /dev/null +++ b/arch/tile/include/gxio/trio.h @@ -0,0 +1,298 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* + * + * An API for allocating, configuring, and manipulating TRIO hardware + * resources + */ + +/* + * + * The TILE-Gx TRIO shim provides connections to external devices via + * PCIe or other transaction IO standards. The gxio_trio_ API, + * declared in , allows applications to allocate and + * configure TRIO IO resources like DMA command rings, memory map + * windows, and device interrupts. The following sections introduce + * the various components of the API. We strongly recommend reading + * the TRIO section of the IO Device Guide (UG404) before working with + * this API. + * + * @section trio__ingress TRIO Ingress Hardware Resources + * + * The TRIO ingress hardware is responsible for examining incoming + * PCIe or StreamIO packets and choosing a processing mechanism based + * on the packets' bus address. The gxio_trio_ API can be used to + * configure different handlers for different ranges of bus address + * space. The user can configure "mapped memory" and "scatter queue" + * regions to match incoming packets within 4kB-aligned ranges of bus + * addresses. Each range specifies a different set of mapping + * parameters to be applied when handling the ingress packet. The + * following sections describe how to work with MapMem and scatter + * queue regions. + * + * @subsection trio__mapmem TRIO MapMem Regions + * + * TRIO mapped memory (or MapMem) regions allow the user to map + * incoming read and write requests directly to the application's + * memory space. MapMem regions are allocated via + * gxio_trio_alloc_memory_maps(). Given an integer MapMem number, + * applications can use gxio_trio_init_memory_map() to specify the + * range of bus addresses that will match the region and the range of + * virtual addresses to which those packets will be applied. + * + * As with many other gxio APIs, the programmer must be sure to + * register memory pages that will be used with MapMem regions. Pages + * can be registered with TRIO by allocating an ASID (address space + * identifier) and then using gxio_trio_register_page() to register up to + * 16 pages with the hardware. The initialization functions for + * resources that require registered memory (MapMem, scatter queues, + * push DMA, and pull DMA) then take an 'asid' parameter in order to + * configure which set of registered pages is used by each resource. + * + * @subsection trio__scatter_queue TRIO Scatter Queues + * + * The TRIO shim's scatter queue regions allow users to dynamically + * map buffers from a large address space into a small range of bus + * addresses. This is particularly helpful for PCIe endpoint devices, + * where the host generally limits the size of BARs to tens of + * megabytes. + * + * Each scatter queue consists of a memory map region, a queue of + * tile-side buffer VAs to be mapped to that region, and a bus-mapped + * "doorbell" register that the remote endpoint can write to trigger a + * dequeue of the current buffer VA, thus swapping in a new buffer. + * The VAs pushed onto a scatter queue must be 4kB aligned, so + * applications may need to use higher-level protocols to inform + * remote entities that they should apply some additional, sub-4kB + * offset when reading or writing the scatter queue region. For more + * information, see the IO Device Guide (UG404). + * + * @section trio__egress TRIO Egress Hardware Resources + * + * The TRIO shim supports two mechanisms for egress packet generation: + * programmed IO (PIO) and push/pull DMA. PIO allows applications to + * create MMIO mappings for PCIe or StreamIO address space, such that + * the application can generate word-sized read or write transactions + * by issuing load or store instructions. Push and pull DMA are tuned + * for larger transactions; they use specialized hardware engines to + * transfer large blocks of data at line rate. + * + * @subsection trio__pio TRIO Programmed IO + * + * Programmed IO allows applications to create MMIO mappings for PCIe + * or StreamIO address space. The hardware PIO regions support access + * to PCIe configuration, IO, and memory space, but the gxio_trio API + * only supports memory space accesses. PIO regions are allocated + * with gxio_trio_alloc_pio_regions() and initialized via + * gxio_trio_init_pio_region(). Once a region is bound to a range of + * bus address via the initialization function, the application can + * use gxio_trio_map_pio_region() to create MMIO mappings from its VA + * space onto the range of bus addresses supported by the PIO region. + * + * @subsection trio_dma TRIO Push and Pull DMA + * + * The TRIO push and pull DMA engines allow users to copy blocks of + * data between application memory and the bus. Push DMA generates + * write packets that copy from application memory to the bus and pull + * DMA generates read packets that copy from the bus into application + * memory. The DMA engines are managed via an API that is very + * similar to the mPIPE eDMA interface. For a detailed explanation of + * the eDMA queue API, see @ref gxio_mpipe_wrappers. + * + * Push and pull DMA queues are allocated via + * gxio_trio_alloc_push_dma_ring() / gxio_trio_alloc_pull_dma_ring(). + * Once allocated, users generally use a ::gxio_trio_dma_queue_t + * object to manage the queue, providing easy wrappers for reserving + * command slots in the DMA command ring, filling those slots, and + * waiting for commands to complete. DMA queues can be initialized + * via gxio_trio_init_push_dma_queue() or + * gxio_trio_init_pull_dma_queue(). + * + * See @ref trio/push_dma/app.c for an example of how to use push DMA. + * + * @section trio_shortcomings Plans for Future API Revisions + * + * The simulation framework is incomplete. Future features include: + * + * - Support for reset and deallocation of resources. + * + * - Support for pull DMA. + * + * - Support for interrupt regions and user-space interrupt delivery. + * + * - Support for getting BAR mappings and reserving regions of BAR + * address space. + */ +#ifndef _GXIO_TRIO_H_ +#define _GXIO_TRIO_H_ + +#include + +#include "common.h" +#include "dma_queue.h" + +#include +#include +#include +#include +#include +#include +#include + +/* A context object used to manage TRIO hardware resources. */ +typedef struct { + + /* File descriptor for calling up to Linux (and thus the HV). */ + int fd; + + /* The VA at which the MAC MMIO registers are mapped. */ + char *mmio_base_mac; + + /* The VA at which the PIO config space are mapped for each PCIe MAC. + Gx36 has max 3 PCIe MACs per TRIO shim. */ + char *mmio_base_pio_cfg[TILEGX_TRIO_PCIES]; + +#ifdef USE_SHARED_PCIE_CONFIG_REGION + /* Index of the shared PIO region for PCI config access. */ + int pio_cfg_index; +#else + /* Index of the PIO region for PCI config access per MAC. */ + int pio_cfg_index[TILEGX_TRIO_PCIES]; +#endif + + /* The VA at which the push DMA MMIO registers are mapped. */ + char *mmio_push_dma[TRIO_NUM_PUSH_DMA_RINGS]; + + /* The VA at which the pull DMA MMIO registers are mapped. */ + char *mmio_pull_dma[TRIO_NUM_PUSH_DMA_RINGS]; + + /* Application space ID. */ + unsigned int asid; + +} gxio_trio_context_t; + +/* Command descriptor for push or pull DMA. */ +typedef TRIO_DMA_DESC_t gxio_trio_dma_desc_t; + +/* A convenient, thread-safe interface to an eDMA ring. */ +typedef struct { + + /* State object for tracking head and tail pointers. */ + __gxio_dma_queue_t dma_queue; + + /* The ring entries. */ + gxio_trio_dma_desc_t *dma_descs; + + /* The number of entries minus one. */ + unsigned long mask_num_entries; + + /* The log2() of the number of entries. */ + unsigned int log2_num_entries; + +} gxio_trio_dma_queue_t; + +/* Initialize a TRIO context. + * + * This function allocates a TRIO "service domain" and maps the MMIO + * registers into the the caller's VA space. + * + * @param trio_index Which TRIO shim; Gx36 must pass 0. + * @param context Context object to be initialized. + */ +extern int gxio_trio_init(gxio_trio_context_t *context, + unsigned int trio_index); + +/* This indicates that an ASID hasn't been allocated. */ +#define GXIO_ASID_NULL -1 + +/* Ordering modes for map memory regions and scatter queue regions. */ +typedef enum gxio_trio_order_mode_e { + /* Writes are not ordered. Reads always wait for previous writes. */ + GXIO_TRIO_ORDER_MODE_UNORDERED = + TRIO_MAP_MEM_SETUP__ORDER_MODE_VAL_UNORDERED, + /* Both writes and reads wait for previous transactions to complete. */ + GXIO_TRIO_ORDER_MODE_STRICT = + TRIO_MAP_MEM_SETUP__ORDER_MODE_VAL_STRICT, + /* Writes are ordered unless the incoming packet has the + relaxed-ordering attributes set. */ + GXIO_TRIO_ORDER_MODE_OBEY_PACKET = + TRIO_MAP_MEM_SETUP__ORDER_MODE_VAL_REL_ORD +} gxio_trio_order_mode_t; + +/* Initialize a memory mapping region. + * + * @param context An initialized TRIO context. + * @param map A Memory map region allocated by gxio_trio_alloc_memory_map(). + * @param target_mem VA of backing memory, should be registered via + * gxio_trio_register_page() and aligned to 4kB. + * @param target_size Length of the memory mapping, must be a multiple + * of 4kB. + * @param asid ASID to be used for Tile-side address translation. + * @param mac MAC number. + * @param bus_address Bus address at which the mapping starts. + * @param order_mode Memory ordering mode for this mapping. + * @return Zero on success, else ::GXIO_TRIO_ERR_BAD_MEMORY_MAP, + * GXIO_TRIO_ERR_BAD_ASID, or ::GXIO_TRIO_ERR_BAD_BUS_RANGE. + */ +extern int gxio_trio_init_memory_map(gxio_trio_context_t *context, + unsigned int map, void *target_mem, + size_t target_size, unsigned int asid, + unsigned int mac, uint64_t bus_address, + gxio_trio_order_mode_t order_mode); + +/* Flags that can be passed to resource allocation functions. */ +enum gxio_trio_alloc_flags_e { + GXIO_TRIO_ALLOC_FIXED = HV_TRIO_ALLOC_FIXED, +}; + +/* Flags that can be passed to memory registration functions. */ +enum gxio_trio_mem_flags_e { + /* Do not fill L3 when writing, and invalidate lines upon egress. */ + GXIO_TRIO_MEM_FLAG_NT_HINT = IORPC_MEM_BUFFER_FLAG_NT_HINT, + + /* L3 cache fills should only populate IO cache ways. */ + GXIO_TRIO_MEM_FLAG_IO_PIN = IORPC_MEM_BUFFER_FLAG_IO_PIN, +}; + +/* Flag indicating a request generator uses a special traffic + class. */ +#define GXIO_TRIO_FLAG_TRAFFIC_CLASS(N) HV_TRIO_FLAG_TC(N) + +/* Flag indicating a request generator uses a virtual function + number. */ +#define GXIO_TRIO_FLAG_VFUNC(N) HV_TRIO_FLAG_VFUNC(N) + +/***************************************************************** + * Memory Registration * + ******************************************************************/ + +/* Allocate Application Space Identifiers (ASIDs). Each ASID can + * register up to 16 page translations. ASIDs are used by memory map + * regions, scatter queues, and DMA queues to translate application + * VAs into memory system PAs. + * + * @param context An initialized TRIO context. + * @param count Number of ASIDs required. + * @param first Index of first ASID if ::GXIO_TRIO_ALLOC_FIXED flag + * is set, otherwise ignored. + * @param flags Flag bits, including bits from ::gxio_trio_alloc_flags_e. + * @return Index of first ASID, or ::GXIO_TRIO_ERR_NO_ASID if allocation + * failed. + */ +extern int gxio_trio_alloc_asids(gxio_trio_context_t *context, + unsigned int count, unsigned int first, + unsigned int flags); + +#endif /* ! _GXIO_TRIO_H_ */ diff --git a/arch/tile/include/hv/drv_trio_intf.h b/arch/tile/include/hv/drv_trio_intf.h new file mode 100644 index 000000000000..ef9f3f52ee27 --- /dev/null +++ b/arch/tile/include/hv/drv_trio_intf.h @@ -0,0 +1,195 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/** + * Interface definitions for the trio driver. + */ + +#ifndef _SYS_HV_DRV_TRIO_INTF_H +#define _SYS_HV_DRV_TRIO_INTF_H + +#include + +/** The vendor ID for all Tilera processors. */ +#define TILERA_VENDOR_ID 0x1a41 + +/** The device ID for the Gx36 processor. */ +#define TILERA_GX36_DEV_ID 0x0200 + +/** Device ID for our internal bridge when running as RC. */ +#define TILERA_GX36_RC_DEV_ID 0x2000 + +/** Maximum number of TRIO interfaces. */ +#define TILEGX_NUM_TRIO 2 + +/** Gx36 has max 3 PCIe MACs per TRIO interface. */ +#define TILEGX_TRIO_PCIES 3 + +/** Specify port properties for a PCIe MAC. */ +struct pcie_port_property +{ + /** If true, the link can be configured in PCIe root complex mode. */ + uint8_t allow_rc: 1; + + /** If true, the link can be configured in PCIe endpoint mode. */ + uint8_t allow_ep: 1; + + /** If true, the link can be configured in StreamIO mode. */ + uint8_t allow_sio: 1; + + /** If true, the link is allowed to support 1-lane operation. Software + * will not consider it an error if the link comes up as a x1 link. */ + uint8_t allow_x1: 1; + + /** If true, the link is allowed to support 2-lane operation. Software + * will not consider it an error if the link comes up as a x2 link. */ + uint8_t allow_x2: 1; + + /** If true, the link is allowed to support 4-lane operation. Software + * will not consider it an error if the link comes up as a x4 link. */ + uint8_t allow_x4: 1; + + /** If true, the link is allowed to support 8-lane operation. Software + * will not consider it an error if the link comes up as a x8 link. */ + uint8_t allow_x8: 1; + + /** Reserved. */ + uint8_t reserved: 1; + +}; + +/** Configurations can be issued to configure a char stream interrupt. */ +typedef enum pcie_stream_intr_config_sel_e +{ + /** Interrupt configuration for memory map regions. */ + MEM_MAP_SEL, + + /** Interrupt configuration for push DMAs. */ + PUSH_DMA_SEL, + + /** Interrupt configuration for pull DMAs. */ + PULL_DMA_SEL, +} +pcie_stream_intr_config_sel_t; + + +/** The mmap file offset (PA) of the TRIO config region. */ +#define HV_TRIO_CONFIG_OFFSET \ + ((unsigned long long)TRIO_MMIO_ADDRESS_SPACE__REGION_VAL_CFG << \ + TRIO_MMIO_ADDRESS_SPACE__REGION_SHIFT) + +/** The maximum size of the TRIO config region. */ +#define HV_TRIO_CONFIG_SIZE \ + (1ULL << TRIO_CFG_REGION_ADDR__REGION_SHIFT) + +/** Size of the config region mapped into client. We can't use + * TRIO_MMIO_ADDRESS_SPACE__OFFSET_WIDTH because it + * will require the kernel to allocate 4GB VA space + * from the VMALLOC region which has a total range + * of 4GB. + */ +#define HV_TRIO_CONFIG_IOREMAP_SIZE \ + ((uint64_t) 1 << TRIO_CFG_REGION_ADDR__PROT_SHIFT) + +/** The mmap file offset (PA) of a scatter queue region. */ +#define HV_TRIO_SQ_OFFSET(queue) \ + (((unsigned long long)TRIO_MMIO_ADDRESS_SPACE__REGION_VAL_MAP_SQ << \ + TRIO_MMIO_ADDRESS_SPACE__REGION_SHIFT) | \ + ((queue) << TRIO_MAP_SQ_REGION_ADDR__SQ_SEL_SHIFT)) + +/** The maximum size of a scatter queue region. */ +#define HV_TRIO_SQ_SIZE \ + (1ULL << TRIO_MAP_SQ_REGION_ADDR__SQ_SEL_SHIFT) + + +/** The "hardware MMIO region" of the first PIO region. */ +#define HV_TRIO_FIRST_PIO_REGION 8 + +/** The mmap file offset (PA) of a PIO region. */ +#define HV_TRIO_PIO_OFFSET(region) \ + (((unsigned long long)(region) + HV_TRIO_FIRST_PIO_REGION) \ + << TRIO_PIO_REGIONS_ADDR__REGION_SHIFT) + +/** The maximum size of a PIO region. */ +#define HV_TRIO_PIO_SIZE (1ULL << TRIO_PIO_REGIONS_ADDR__ADDR_WIDTH) + + +/** The mmap file offset (PA) of a push DMA region. */ +#define HV_TRIO_PUSH_DMA_OFFSET(ring) \ + (((unsigned long long)TRIO_MMIO_ADDRESS_SPACE__REGION_VAL_PUSH_DMA << \ + TRIO_MMIO_ADDRESS_SPACE__REGION_SHIFT) | \ + ((ring) << TRIO_PUSH_DMA_REGION_ADDR__RING_SEL_SHIFT)) + +/** The mmap file offset (PA) of a pull DMA region. */ +#define HV_TRIO_PULL_DMA_OFFSET(ring) \ + (((unsigned long long)TRIO_MMIO_ADDRESS_SPACE__REGION_VAL_PULL_DMA << \ + TRIO_MMIO_ADDRESS_SPACE__REGION_SHIFT) | \ + ((ring) << TRIO_PULL_DMA_REGION_ADDR__RING_SEL_SHIFT)) + +/** The maximum size of a DMA region. */ +#define HV_TRIO_DMA_REGION_SIZE \ + (1ULL << TRIO_PUSH_DMA_REGION_ADDR__RING_SEL_SHIFT) + + +/** The mmap file offset (PA) of a Mem-Map interrupt region. */ +#define HV_TRIO_MEM_MAP_INTR_OFFSET(map) \ + (((unsigned long long)TRIO_MMIO_ADDRESS_SPACE__REGION_VAL_MAP_MEM << \ + TRIO_MMIO_ADDRESS_SPACE__REGION_SHIFT) | \ + ((map) << TRIO_MAP_MEM_REGION_ADDR__MAP_SEL_SHIFT)) + +/** The maximum size of a Mem-Map interrupt region. */ +#define HV_TRIO_MEM_MAP_INTR_SIZE \ + (1ULL << TRIO_MAP_MEM_REGION_ADDR__MAP_SEL_SHIFT) + + +/** A flag bit indicating a fixed resource allocation. */ +#define HV_TRIO_ALLOC_FIXED 0x01 + +/** TRIO requires that all mappings have 4kB aligned start addresses. */ +#define HV_TRIO_PAGE_SHIFT 12 + +/** TRIO requires that all mappings have 4kB aligned start addresses. */ +#define HV_TRIO_PAGE_SIZE (1ull << HV_TRIO_PAGE_SHIFT) + + +/* Specify all PCIe port properties for a TRIO. */ +struct pcie_trio_ports_property +{ + struct pcie_port_property ports[TILEGX_TRIO_PCIES]; +}; + +/* Flags indicating traffic class. */ +#define HV_TRIO_FLAG_TC_SHIFT 4 +#define HV_TRIO_FLAG_TC_RMASK 0xf +#define HV_TRIO_FLAG_TC(N) \ + ((((N) & HV_TRIO_FLAG_TC_RMASK) + 1) << HV_TRIO_FLAG_TC_SHIFT) + +/* Flags indicating virtual functions. */ +#define HV_TRIO_FLAG_VFUNC_SHIFT 8 +#define HV_TRIO_FLAG_VFUNC_RMASK 0xff +#define HV_TRIO_FLAG_VFUNC(N) \ + ((((N) & HV_TRIO_FLAG_VFUNC_RMASK) + 1) << HV_TRIO_FLAG_VFUNC_SHIFT) + + +/* Flag indicating an ordered PIO region. */ +#define HV_TRIO_PIO_FLAG_ORDERED (1 << 16) + +/* Flags indicating special types of PIO regions. */ +#define HV_TRIO_PIO_FLAG_SPACE_SHIFT 17 +#define HV_TRIO_PIO_FLAG_SPACE_MASK (0x3 << HV_TRIO_PIO_FLAG_SPACE_SHIFT) +#define HV_TRIO_PIO_FLAG_CONFIG_SPACE (0x1 << HV_TRIO_PIO_FLAG_SPACE_SHIFT) +#define HV_TRIO_PIO_FLAG_IO_SPACE (0x2 << HV_TRIO_PIO_FLAG_SPACE_SHIFT) + + +#endif /* _SYS_HV_DRV_TRIO_INTF_H */ -- cgit v1.2.3-59-g8ed1b From 129622672d70711c6c844fb529381ff0dad9085a Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Sat, 7 Apr 2012 17:10:17 -0400 Subject: arch/tile: tilegx PCI root complex support This change implements PCIe root complex support for tilegx using the kernel support layer for accessing the TRIO hardware shim. Reviewed-by: Bjorn Helgaas [changes in 07487f3] Signed-off-by: Chris Metcalf --- arch/tile/Kconfig | 3 + arch/tile/include/asm/pci.h | 98 ++- arch/tile/kernel/Makefile | 4 + arch/tile/kernel/pci_gx.c | 1544 +++++++++++++++++++++++++++++++++++++++++++ arch/tile/kernel/setup.c | 6 + arch/tile/mm/pgtable.c | 7 - drivers/pci/quirks.c | 6 +- 7 files changed, 1648 insertions(+), 20 deletions(-) create mode 100644 arch/tile/kernel/pci_gx.c diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index 645979cfb718..a5302d319229 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -356,6 +356,9 @@ config PCI default y select PCI_DOMAINS select GENERIC_PCI_IOMAP + select TILE_GXIO_TRIO if TILEGX + select ARCH_SUPPORTS_MSI if TILEGX + select PCI_MSI if TILEGX ---help--- Enable PCI root complex support, so PCIe endpoint devices can be attached to the Tile chip. Many, but not all, PCI devices diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h index 32e6cbe8dff3..2c224c47d8ab 100644 --- a/arch/tile/include/asm/pci.h +++ b/arch/tile/include/asm/pci.h @@ -16,8 +16,11 @@ #define _ASM_TILE_PCI_H #include +#include #include +#ifndef __tilegx__ + /* * Structure of a PCI controller (host bridge) */ @@ -40,6 +43,91 @@ struct pci_controller { struct resource mem_resources[3]; }; +/* + * This flag tells if the platform is TILEmpower that needs + * special configuration for the PLX switch chip. + */ +extern int tile_plx_gen1; + +static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {} + +#define TILE_NUM_PCIE 2 + +#else + +#include +#include + +/** + * We reserve the hugepage-size address range at the top of the 64-bit address + * space to serve as the PCI window, emulating the BAR0 space of an endpoint + * device. This window is used by the chip-to-chip applications running on + * the RC node. The reason for carving out this window is that Mem-Maps that + * back up this window will not overlap with those that map the real physical + * memory. + */ +#define PCIE_HOST_BAR0_SIZE HPAGE_SIZE +#define PCIE_HOST_BAR0_START HPAGE_MASK + +/** + * The first PAGE_SIZE of the above "BAR" window is mapped to the + * gxpci_host_regs structure. + */ +#define PCIE_HOST_REGS_SIZE PAGE_SIZE + +/* + * This is the PCI address where the Mem-Map interrupt regions start. + * We use the 2nd to the last huge page of the 64-bit address space. + * The last huge page is used for the rootcomplex "bar", for C2C purpose. + */ +#define MEM_MAP_INTR_REGIONS_BASE (HPAGE_MASK - HPAGE_SIZE) + +/* + * Each Mem-Map interrupt region occupies 4KB. + */ +#define MEM_MAP_INTR_REGION_SIZE (1<< TRIO_MAP_MEM_LIM__ADDR_SHIFT) + +/* + * Structure of a PCI controller (host bridge) on Gx. + */ +struct pci_controller { + + /* Pointer back to the TRIO that this PCIe port is connected to. */ + gxio_trio_context_t *trio; + int mac; /* PCIe mac index on the TRIO shim */ + int trio_index; /* Index of TRIO shim that contains the MAC. */ + + int pio_mem_index; /* PIO region index for memory access */ + + /* + * Mem-Map regions for all the memory controllers so that Linux can + * map all of its physical memory space to the PCI bus. + */ + int mem_maps[MAX_NUMNODES]; + + int index; /* PCI domain number */ + struct pci_bus *root_bus; + + int last_busno; + + struct pci_ops *ops; + + /* Table that maps the INTx numbers to Linux irq numbers. */ + int irq_intx_table[4]; + + struct resource mem_space; + + /* Address ranges that are routed to this controller/bridge. */ + struct resource mem_resources[3]; +}; + +extern struct pci_controller pci_controllers[TILEGX_NUM_TRIO * TILEGX_TRIO_PCIES]; +extern gxio_trio_context_t trio_contexts[TILEGX_NUM_TRIO]; + +extern void pci_iounmap(struct pci_dev *dev, void __iomem *); + +#endif /* __tilegx__ */ + /* * The hypervisor maps the entirety of CPA-space as bus addresses, so * bus addresses are physical addresses. The networking and block @@ -50,12 +138,8 @@ struct pci_controller { int __init tile_pci_init(void); int __init pcibios_init(void); -static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {} - void __devinit pcibios_fixup_bus(struct pci_bus *bus); -#define TILE_NUM_PCIE 2 - #define pci_domain_nr(bus) (((struct pci_controller *)(bus)->sysdata)->index) /* @@ -79,12 +163,6 @@ static inline int pcibios_assign_all_busses(void) #define PCIBIOS_MIN_MEM 0 #define PCIBIOS_MIN_IO 0 -/* - * This flag tells if the platform is TILEmpower that needs - * special configuration for the PLX switch chip. - */ -extern int tile_plx_gen1; - /* Use any cpu for PCI. */ #define cpumask_of_pcibus(bus) cpu_online_mask diff --git a/arch/tile/kernel/Makefile b/arch/tile/kernel/Makefile index 5de99248d8df..49d4ce3cd7f4 100644 --- a/arch/tile/kernel/Makefile +++ b/arch/tile/kernel/Makefile @@ -14,4 +14,8 @@ obj-$(CONFIG_SMP) += smpboot.o smp.o tlb.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel_$(BITS).o +ifdef CONFIG_TILEGX +obj-$(CONFIG_PCI) += pci_gx.o +else obj-$(CONFIG_PCI) += pci.o +endif diff --git a/arch/tile/kernel/pci_gx.c b/arch/tile/kernel/pci_gx.c new file mode 100644 index 000000000000..1b996bb628f1 --- /dev/null +++ b/arch/tile/kernel/pci_gx.c @@ -0,0 +1,1544 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include + +#include + +/* + * Initialization flow and process + * ------------------------------- + * + * This files containes the routines to search for PCI buses, + * enumerate the buses, and configure any attached devices. + * + * There are two entry points here: + * 1) tile_pci_init + * This sets up the pci_controller structs, and opens the + * FDs to the hypervisor. This is called from setup_arch() early + * in the boot process. + * 2) pcibios_init + * This probes the PCI bus(es) for any attached hardware. It's + * called by subsys_initcall. All of the real work is done by the + * generic Linux PCI layer. + * + */ + +#define DEBUG_PCI_CFG 0 + +#if DEBUG_PCI_CFG +#define TRACE_CFG_WR(size, val, bus, dev, func, offset) \ + pr_info("CFG WR %d-byte VAL %#x to bus %d dev %d func %d addr %u\n", \ + size, val, bus, dev, func, offset & 0xFFF); +#define TRACE_CFG_RD(size, val, bus, dev, func, offset) \ + pr_info("CFG RD %d-byte VAL %#x from bus %d dev %d func %d addr %u\n", \ + size, val, bus, dev, func, offset & 0xFFF); +#else +#define TRACE_CFG_WR(...) +#define TRACE_CFG_RD(...) +#endif + +static int __devinitdata pci_probe = 1; + +/* Information on the PCIe RC ports configuration. */ +static int __devinitdata pcie_rc[TILEGX_NUM_TRIO][TILEGX_TRIO_PCIES]; + +/* + * On some platforms with one or more Gx endpoint ports, we need to + * delay the PCIe RC port probe for a few seconds to work around + * a HW PCIe link-training bug. The exact delay is specified with + * a kernel boot argument in the form of "pcie_rc_delay=T,P,S", + * where T is the TRIO instance number, P is the port number and S is + * the delay in seconds. If the delay is not provided, the value + * will be DEFAULT_RC_DELAY. + */ +static int __devinitdata rc_delay[TILEGX_NUM_TRIO][TILEGX_TRIO_PCIES]; + +/* Default number of seconds that the PCIe RC port probe can be delayed. */ +#define DEFAULT_RC_DELAY 10 + +/* Max number of seconds that the PCIe RC port probe can be delayed. */ +#define MAX_RC_DELAY 20 + +/* Array of the PCIe ports configuration info obtained from the BIB. */ +struct pcie_port_property pcie_ports[TILEGX_NUM_TRIO][TILEGX_TRIO_PCIES]; + +/* All drivers share the TRIO contexts defined here. */ +gxio_trio_context_t trio_contexts[TILEGX_NUM_TRIO]; + +/* Pointer to an array of PCIe RC controllers. */ +struct pci_controller pci_controllers[TILEGX_NUM_TRIO * TILEGX_TRIO_PCIES]; +int num_rc_controllers; +static int num_ep_controllers; + +static struct pci_ops tile_cfg_ops; + +/* Mask of CPUs that should receive PCIe interrupts. */ +static struct cpumask intr_cpus_map; + +/* + * We don't need to worry about the alignment of resources. + */ +resource_size_t pcibios_align_resource(void *data, const struct resource *res, + resource_size_t size, resource_size_t align) +{ + return res->start; +} +EXPORT_SYMBOL(pcibios_align_resource); + + +/* + * Pick a CPU to receive and handle the PCIe interrupts, based on the IRQ #. + * For now, we simply send interrupts to non-dataplane CPUs. + * We may implement methods to allow user to specify the target CPUs, + * e.g. via boot arguments. + */ +static int tile_irq_cpu(int irq) +{ + unsigned int count; + int i = 0; + int cpu; + + count = cpumask_weight(&intr_cpus_map); + if (unlikely(count == 0)) { + pr_warning("intr_cpus_map empty, interrupts will be" + " delievered to dataplane tiles\n"); + return irq % (smp_height * smp_width); + } + + count = irq % count; + for_each_cpu(cpu, &intr_cpus_map) { + if (i++ == count) + break; + } + return cpu; +} + +/* + * Open a file descriptor to the TRIO shim. + */ +static int __devinit tile_pcie_open(int trio_index) +{ + gxio_trio_context_t *context = &trio_contexts[trio_index]; + int ret; + + /* + * This opens a file descriptor to the TRIO shim. + */ + ret = gxio_trio_init(context, trio_index); + if (ret < 0) + return ret; + + /* + * Allocate an ASID for the kernel. + */ + ret = gxio_trio_alloc_asids(context, 1, 0, 0); + if (ret < 0) { + pr_err("PCI: ASID alloc failure on TRIO %d, give up\n", + trio_index); + goto asid_alloc_failure; + } + + context->asid = ret; + +#ifdef USE_SHARED_PCIE_CONFIG_REGION + /* + * Alloc a PIO region for config access, shared by all MACs per TRIO. + * This shouldn't fail since the kernel is supposed to the first + * client of the TRIO's PIO regions. + */ + ret = gxio_trio_alloc_pio_regions(context, 1, 0, 0); + if (ret < 0) { + pr_err("PCI: CFG PIO alloc failure on TRIO %d, give up\n", + trio_index); + goto pio_alloc_failure; + } + + context->pio_cfg_index = ret; + + /* + * For PIO CFG, the bus_address_hi parameter is 0. The mac parameter + * is also 0 because it is specified in PIO_REGION_SETUP_CFG_ADDR. + */ + ret = gxio_trio_init_pio_region_aux(context, context->pio_cfg_index, + 0, 0, HV_TRIO_PIO_FLAG_CONFIG_SPACE); + if (ret < 0) { + pr_err("PCI: CFG PIO init failure on TRIO %d, give up\n", + trio_index); + goto pio_alloc_failure; + } +#endif + + return ret; + +asid_alloc_failure: +#ifdef USE_SHARED_PCIE_CONFIG_REGION +pio_alloc_failure: +#endif + hv_dev_close(context->fd); + + return ret; +} + +static void +tilegx_legacy_irq_ack(struct irq_data *d) +{ + __insn_mtspr(SPR_IPI_EVENT_RESET_K, 1UL << d->irq); +} + +static void +tilegx_legacy_irq_mask(struct irq_data *d) +{ + __insn_mtspr(SPR_IPI_MASK_SET_K, 1UL << d->irq); +} + +static void +tilegx_legacy_irq_unmask(struct irq_data *d) +{ + __insn_mtspr(SPR_IPI_MASK_RESET_K, 1UL << d->irq); +} + +static struct irq_chip tilegx_legacy_irq_chip = { + .name = "tilegx_legacy_irq", + .irq_ack = tilegx_legacy_irq_ack, + .irq_mask = tilegx_legacy_irq_mask, + .irq_unmask = tilegx_legacy_irq_unmask, + + /* TBD: support set_affinity. */ +}; + +/* + * This is a wrapper function of the kernel level-trigger interrupt + * handler handle_level_irq() for PCI legacy interrupts. The TRIO + * is configured such that only INTx Assert interrupts are proxied + * to Linux which just calls handle_level_irq() after clearing the + * MAC INTx Assert status bit associated with this interrupt. + */ +static void +trio_handle_level_irq(unsigned int irq, struct irq_desc *desc) +{ + struct pci_controller *controller = irq_desc_get_handler_data(desc); + gxio_trio_context_t *trio_context = controller->trio; + uint64_t intx = (uint64_t)irq_desc_get_chip_data(desc); + int mac = controller->mac; + unsigned int reg_offset; + uint64_t level_mask; + + handle_level_irq(irq, desc); + + /* + * Clear the INTx Level status, otherwise future interrupts are + * not sent. + */ + reg_offset = (TRIO_PCIE_INTFC_MAC_INT_STS << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + level_mask = TRIO_PCIE_INTFC_MAC_INT_STS__INT_LEVEL_MASK << intx; + + __gxio_mmio_write(trio_context->mmio_base_mac + reg_offset, level_mask); +} + +/* + * Create kernel irqs and set up the handlers for the legacy interrupts. + * Also some minimum initialization for the MSI support. + */ +static int __devinit tile_init_irqs(struct pci_controller *controller) +{ + int i; + int j; + int irq; + int result; + + cpumask_copy(&intr_cpus_map, cpu_online_mask); + + + for (i = 0; i < 4; i++) { + gxio_trio_context_t *context = controller->trio; + int cpu; + + /* Ask the kernel to allocate an IRQ. */ + irq = create_irq(); + if (irq < 0) { + pr_err("PCI: no free irq vectors, failed for %d\n", i); + + goto free_irqs; + } + controller->irq_intx_table[i] = irq; + + /* Distribute the 4 IRQs to different tiles. */ + cpu = tile_irq_cpu(irq); + + /* Configure the TRIO intr binding for this IRQ. */ + result = gxio_trio_config_legacy_intr(context, cpu_x(cpu), + cpu_y(cpu), KERNEL_PL, + irq, controller->mac, i); + if (result < 0) { + pr_err("PCI: MAC intx config failed for %d\n", i); + + goto free_irqs; + } + + /* + * Register the IRQ handler with the kernel. + */ + irq_set_chip_and_handler(irq, &tilegx_legacy_irq_chip, + trio_handle_level_irq); + irq_set_chip_data(irq, (void *)(uint64_t)i); + irq_set_handler_data(irq, controller); + } + + return 0; + +free_irqs: + for (j = 0; j < i; j++) + destroy_irq(controller->irq_intx_table[j]); + + return -1; +} + +/* + * First initialization entry point, called from setup_arch(). + * + * Find valid controllers and fill in pci_controller structs for each + * of them. + * + * Returns the number of controllers discovered. + */ +int __init tile_pci_init(void) +{ + int num_trio_shims = 0; + int ctl_index = 0; + int i, j; + + if (!pci_probe) { + pr_info("PCI: disabled by boot argument\n"); + return 0; + } + + pr_info("PCI: Searching for controllers...\n"); + + /* + * We loop over all the TRIO shims. + */ + for (i = 0; i < TILEGX_NUM_TRIO; i++) { + int ret; + + ret = tile_pcie_open(i); + if (ret < 0) + continue; + + num_trio_shims++; + } + + if (num_trio_shims == 0 || sim_is_simulator()) + return 0; + + /* + * Now determine which PCIe ports are configured to operate in RC mode. + * We look at the Board Information Block first and then see if there + * are any overriding configuration by the HW strapping pin. + */ + for (i = 0; i < TILEGX_NUM_TRIO; i++) { + gxio_trio_context_t *context = &trio_contexts[i]; + int ret; + + if (context->fd < 0) + continue; + + ret = hv_dev_pread(context->fd, 0, + (HV_VirtAddr)&pcie_ports[i][0], + sizeof(struct pcie_port_property) * TILEGX_TRIO_PCIES, + GXIO_TRIO_OP_GET_PORT_PROPERTY); + if (ret < 0) { + pr_err("PCI: PCIE_GET_PORT_PROPERTY failure, error %d," + " on TRIO %d\n", ret, i); + continue; + } + + for (j = 0; j < TILEGX_TRIO_PCIES; j++) { + if (pcie_ports[i][j].allow_rc) { + pcie_rc[i][j] = 1; + num_rc_controllers++; + } + else if (pcie_ports[i][j].allow_ep) { + num_ep_controllers++; + } + } + } + + /* + * Return if no PCIe ports are configured to operate in RC mode. + */ + if (num_rc_controllers == 0) + return 0; + + /* + * Set the TRIO pointer and MAC index for each PCIe RC port. + */ + for (i = 0; i < TILEGX_NUM_TRIO; i++) { + for (j = 0; j < TILEGX_TRIO_PCIES; j++) { + if (pcie_rc[i][j]) { + pci_controllers[ctl_index].trio = + &trio_contexts[i]; + pci_controllers[ctl_index].mac = j; + pci_controllers[ctl_index].trio_index = i; + ctl_index++; + if (ctl_index == num_rc_controllers) + goto out; + } + } + } + +out: + /* + * Configure each PCIe RC port. + */ + for (i = 0; i < num_rc_controllers; i++) { + /* + * Configure the PCIe MAC to run in RC mode. + */ + + struct pci_controller *controller = &pci_controllers[i]; + + controller->index = i; + controller->last_busno = 0xff; + controller->ops = &tile_cfg_ops; + + } + + return num_rc_controllers; +} + +/* + * (pin - 1) converts from the PCI standard's [1:4] convention to + * a normal [0:3] range. + */ +static int tile_map_irq(const struct pci_dev *dev, u8 device, u8 pin) +{ + struct pci_controller *controller = + (struct pci_controller *)dev->sysdata; + return controller->irq_intx_table[pin - 1]; +} + + +static void __devinit fixup_read_and_payload_sizes(struct pci_controller * + controller) +{ + gxio_trio_context_t *trio_context = controller->trio; + struct pci_bus *root_bus = controller->root_bus; + TRIO_PCIE_RC_DEVICE_CONTROL_t dev_control; + TRIO_PCIE_RC_DEVICE_CAP_t rc_dev_cap; + unsigned int reg_offset; + struct pci_bus *child; + int mac; + int err; + + mac = controller->mac; + + /* + * Set our max read request size to be 4KB. + */ + reg_offset = + (TRIO_PCIE_RC_DEVICE_CONTROL << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_STANDARD << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + dev_control.word = __gxio_mmio_read32(trio_context->mmio_base_mac + + reg_offset); + dev_control.max_read_req_sz = 5; + __gxio_mmio_write32(trio_context->mmio_base_mac + reg_offset, + dev_control.word); + + /* + * Set the max payload size supported by this Gx PCIe MAC. + * Though Gx PCIe supports Max Payload Size of up to 1024 bytes, + * experiments have shown that setting MPS to 256 yields the + * best performance. + */ + reg_offset = + (TRIO_PCIE_RC_DEVICE_CAP << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_STANDARD << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + rc_dev_cap.word = __gxio_mmio_read32(trio_context->mmio_base_mac + + reg_offset); + rc_dev_cap.mps_sup = 1; + __gxio_mmio_write32(trio_context->mmio_base_mac + reg_offset, + rc_dev_cap.word); + + /* Configure PCI Express MPS setting. */ + list_for_each_entry(child, &root_bus->children, node) { + struct pci_dev *self = child->self; + if (!self) + continue; + + pcie_bus_configure_settings(child, self->pcie_mpss); + } + + /* + * Set the mac_config register in trio based on the MPS/MRS of the link. + */ + reg_offset = + (TRIO_PCIE_RC_DEVICE_CONTROL << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_STANDARD << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + dev_control.word = __gxio_mmio_read32(trio_context->mmio_base_mac + + reg_offset); + + err = gxio_trio_set_mps_mrs(trio_context, + dev_control.max_payload_size, + dev_control.max_read_req_sz, + mac); + if (err < 0) { + pr_err("PCI: PCIE_CONFIGURE_MAC_MPS_MRS failure, " + "MAC %d on TRIO %d\n", + mac, controller->trio_index); + } +} + +static int __devinit setup_pcie_rc_delay(char *str) +{ + unsigned long delay = 0; + unsigned long trio_index; + unsigned long mac; + + if (str == NULL || !isdigit(*str)) + return -EINVAL; + trio_index = simple_strtoul(str, (char **)&str, 10); + if (trio_index >= TILEGX_NUM_TRIO) + return -EINVAL; + + if (*str != ',') + return -EINVAL; + + str++; + if (!isdigit(*str)) + return -EINVAL; + mac = simple_strtoul(str, (char **)&str, 10); + if (mac >= TILEGX_TRIO_PCIES) + return -EINVAL; + + if (*str != '\0') { + if (*str != ',') + return -EINVAL; + + str++; + if (!isdigit(*str)) + return -EINVAL; + delay = simple_strtoul(str, (char **)&str, 10); + if (delay > MAX_RC_DELAY) + return -EINVAL; + } + + rc_delay[trio_index][mac] = delay ? : DEFAULT_RC_DELAY; + pr_info("Delaying PCIe RC link training for %u sec" + " on MAC %lu on TRIO %lu\n", rc_delay[trio_index][mac], + mac, trio_index); + return 0; +} +early_param("pcie_rc_delay", setup_pcie_rc_delay); + +/* + * Second PCI initialization entry point, called by subsys_initcall. + * + * The controllers have been set up by the time we get here, by a call to + * tile_pci_init. + */ +int __init pcibios_init(void) +{ + resource_size_t offset; + LIST_HEAD(resources); + int i; + + if (num_rc_controllers == 0 && num_ep_controllers == 0) + return 0; + + pr_info("PCI: Probing PCI hardware\n"); + + /* + * We loop over all the TRIO shims and set up the MMIO mappings. + * This step can't be done in tile_pci_init because the MM subsystem + * hasn't been initialized then. + */ + for (i = 0; i < TILEGX_NUM_TRIO; i++) { + gxio_trio_context_t *context = &trio_contexts[i]; + + if (context->fd < 0) + continue; + + /* + * Map in the MMIO space for the MAC. + */ + offset = 0; + context->mmio_base_mac = + iorpc_ioremap(context->fd, offset, + HV_TRIO_CONFIG_IOREMAP_SIZE); + if (context->mmio_base_mac == NULL) { + pr_err("PCI: MAC map failure on TRIO %d\n", i); + + hv_dev_close(context->fd); + context->fd = -1; + continue; + } + } + + /* + * Delay a bit in case devices aren't ready. Some devices are + * known to require at least 20ms here, but we use a more + * conservative value. + */ + msleep(250); + + /* Scan all of the recorded PCI controllers. */ + for (i = 0; i < num_rc_controllers; i++) { + struct pci_controller *controller = &pci_controllers[i]; + gxio_trio_context_t *trio_context = controller->trio; + TRIO_PCIE_INTFC_PORT_CONFIG_t port_config; + TRIO_PCIE_INTFC_PORT_STATUS_t port_status; + TRIO_PCIE_INTFC_TX_FIFO_CTL_t tx_fifo_ctl; + struct pci_bus *bus; + unsigned int reg_offset; + unsigned int class_code_revision; + int trio_index; + int mac; +#ifndef USE_SHARED_PCIE_CONFIG_REGION + int ret; +#endif + + if (trio_context->fd < 0) + continue; + + trio_index = controller->trio_index; + mac = controller->mac; + + /* + * Check the port strap state which will override the BIB + * setting. + */ + + reg_offset = + (TRIO_PCIE_INTFC_PORT_CONFIG << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + port_config.word = + __gxio_mmio_read(trio_context->mmio_base_mac + + reg_offset); + + if ((port_config.strap_state != + TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_RC) && + (port_config.strap_state != + TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_RC_G1)) { + /* + * If this is really intended to be an EP port, + * record it so that the endpoint driver will know about it. + */ + if (port_config.strap_state == + TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_ENDPOINT || + port_config.strap_state == + TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_ENDPOINT_G1) + pcie_ports[trio_index][mac].allow_ep = 1; + + continue; + } + + /* + * Delay the RC link training if needed. + */ + if (rc_delay[trio_index][mac]) + msleep(rc_delay[trio_index][mac] * 1000); + + ret = gxio_trio_force_rc_link_up(trio_context, mac); + if (ret < 0) + pr_err("PCI: PCIE_FORCE_LINK_UP failure, " + "MAC %d on TRIO %d\n", mac, trio_index); + + pr_info("PCI: Found PCI controller #%d on TRIO %d MAC %d\n", i, + trio_index, controller->mac); + + /* + * Wait a bit here because some EP devices take longer + * to come up. + */ + msleep(1000); + + /* + * Check for PCIe link-up status. + */ + + reg_offset = + (TRIO_PCIE_INTFC_PORT_STATUS << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + port_status.word = + __gxio_mmio_read(trio_context->mmio_base_mac + + reg_offset); + if (!port_status.dl_up) { + pr_err("PCI: link is down, MAC %d on TRIO %d\n", + mac, trio_index); + continue; + } + + /* + * Ensure that the link can come out of L1 power down state. + * Strictly speaking, this is needed only in the case of + * heavy RC-initiated DMAs. + */ + reg_offset = + (TRIO_PCIE_INTFC_TX_FIFO_CTL << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + tx_fifo_ctl.word = + __gxio_mmio_read(trio_context->mmio_base_mac + + reg_offset); + tx_fifo_ctl.min_p_credits = 0; + __gxio_mmio_write(trio_context->mmio_base_mac + reg_offset, + tx_fifo_ctl.word); + + /* + * Change the device ID so that Linux bus crawl doesn't confuse + * the internal bridge with any Tilera endpoints. + */ + + reg_offset = + (TRIO_PCIE_RC_DEVICE_ID_VEN_ID << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_STANDARD << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + __gxio_mmio_write32(trio_context->mmio_base_mac + reg_offset, + (TILERA_GX36_RC_DEV_ID << + TRIO_PCIE_RC_DEVICE_ID_VEN_ID__DEV_ID_SHIFT) | + TILERA_VENDOR_ID); + + /* + * Set the internal P2P bridge class code. + */ + + reg_offset = + (TRIO_PCIE_RC_REVISION_ID << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_STANDARD << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + class_code_revision = + __gxio_mmio_read32(trio_context->mmio_base_mac + + reg_offset); + class_code_revision = (class_code_revision & 0xff ) | + (PCI_CLASS_BRIDGE_PCI << 16); + + __gxio_mmio_write32(trio_context->mmio_base_mac + + reg_offset, class_code_revision); + +#ifdef USE_SHARED_PCIE_CONFIG_REGION + + /* + * Map in the MMIO space for the PIO region. + */ + offset = HV_TRIO_PIO_OFFSET(trio_context->pio_cfg_index) | + (((unsigned long long)mac) << + TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT); + +#else + + /* + * Alloc a PIO region for PCI config access per MAC. + */ + ret = gxio_trio_alloc_pio_regions(trio_context, 1, 0, 0); + if (ret < 0) { + pr_err("PCI: PCI CFG PIO alloc failure for mac %d " + "on TRIO %d, give up\n", mac, trio_index); + + /* TBD: cleanup ... */ + + continue; + } + + trio_context->pio_cfg_index[mac] = ret; + + /* + * For PIO CFG, the bus_address_hi parameter is 0. + */ + ret = gxio_trio_init_pio_region_aux(trio_context, + trio_context->pio_cfg_index[mac], + mac, 0, HV_TRIO_PIO_FLAG_CONFIG_SPACE); + if (ret < 0) { + pr_err("PCI: PCI CFG PIO init failure for mac %d " + "on TRIO %d, give up\n", mac, trio_index); + + /* TBD: cleanup ... */ + + continue; + } + + offset = HV_TRIO_PIO_OFFSET(trio_context->pio_cfg_index[mac]) | + (((unsigned long long)mac) << + TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT); + +#endif + + trio_context->mmio_base_pio_cfg[mac] = + iorpc_ioremap(trio_context->fd, offset, + (1 << TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT)); + if (trio_context->mmio_base_pio_cfg[mac] == NULL) { + pr_err("PCI: PIO map failure for mac %d on TRIO %d\n", + mac, trio_index); + + /* TBD: cleanup ... */ + + continue; + } + + /* + * Initialize the PCIe interrupts. + */ + if (tile_init_irqs(controller)) { + pr_err("PCI: IRQs init failure for mac %d on TRIO %d\n", + mac, trio_index); + + continue; + } + + pci_add_resource(&resources, &iomem_resource); + bus = pci_scan_root_bus(NULL, 0, controller->ops, + controller, &resources); + controller->root_bus = bus; + controller->last_busno = bus->subordinate; + + } + + /* Do machine dependent PCI interrupt routing */ + pci_fixup_irqs(pci_common_swizzle, tile_map_irq); + + /* + * This comes from the generic Linux PCI driver. + * + * It allocates all of the resources (I/O memory, etc) + * associated with the devices read in above. + */ + + pci_assign_unassigned_resources(); + + /* Record the I/O resources in the PCI controller structure. */ + for (i = 0; i < num_rc_controllers; i++) { + struct pci_controller *controller = &pci_controllers[i]; + gxio_trio_context_t *trio_context = controller->trio; + struct pci_bus *root_bus = pci_controllers[i].root_bus; + struct pci_bus *next_bus; + uint32_t bus_address_hi; + struct pci_dev *dev; + int ret; + int j; + + /* + * Skip controllers that are not properly initialized or + * have down links. + */ + if (root_bus == NULL) + continue; + + /* Configure the max_payload_size values for this domain. */ + fixup_read_and_payload_sizes(controller); + + list_for_each_entry(dev, &root_bus->devices, bus_list) { + /* Find the PCI host controller, ie. the 1st bridge. */ + if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && + (PCI_SLOT(dev->devfn) == 0)) { + next_bus = dev->subordinate; + pci_controllers[i].mem_resources[0] = + *next_bus->resource[0]; + pci_controllers[i].mem_resources[1] = + *next_bus->resource[1]; + pci_controllers[i].mem_resources[2] = + *next_bus->resource[2]; + + break; + } + } + + if (pci_controllers[i].mem_resources[1].flags & IORESOURCE_MEM) + bus_address_hi = + pci_controllers[i].mem_resources[1].start >> 32; + else if (pci_controllers[i].mem_resources[2].flags & IORESOURCE_PREFETCH) + bus_address_hi = + pci_controllers[i].mem_resources[2].start >> 32; + else { + /* This is unlikely. */ + pr_err("PCI: no memory resources on TRIO %d mac %d\n", + controller->trio_index, controller->mac); + continue; + } + + /* + * We always assign 32-bit PCI bus BAR ranges. + */ + BUG_ON(bus_address_hi != 0); + + /* + * Alloc a PIO region for PCI memory access for each RC port. + */ + ret = gxio_trio_alloc_pio_regions(trio_context, 1, 0, 0); + if (ret < 0) { + pr_err("PCI: MEM PIO alloc failure on TRIO %d mac %d, " + "give up\n", controller->trio_index, + controller->mac); + + /* TBD: cleanup ... */ + + continue; + } + + controller->pio_mem_index = ret; + + /* + * For PIO MEM, the bus_address_hi parameter is hard-coded 0 + * because we always assign 32-bit PCI bus BAR ranges. + */ + ret = gxio_trio_init_pio_region_aux(trio_context, + controller->pio_mem_index, + controller->mac, + bus_address_hi, + 0); + if (ret < 0) { + pr_err("PCI: MEM PIO init failure on TRIO %d mac %d, " + "give up\n", controller->trio_index, + controller->mac); + + /* TBD: cleanup ... */ + + continue; + } + + /* + * Configure a Mem-Map region for each memory controller so + * that Linux can map all of its PA space to the PCI bus. + * Use the IOMMU to handle hash-for-home memory. + */ + for_each_online_node(j) { + unsigned long start_pfn = node_start_pfn[j]; + unsigned long end_pfn = node_end_pfn[j]; + unsigned long nr_pages = end_pfn - start_pfn; + + ret = gxio_trio_alloc_memory_maps(trio_context, 1, 0, + 0); + if (ret < 0) { + pr_err("PCI: Mem-Map alloc failure on TRIO %d " + "mac %d for MC %d, give up\n", + controller->trio_index, + controller->mac, j); + + /* TBD: cleanup ... */ + + goto alloc_mem_map_failed; + } + + controller->mem_maps[j] = ret; + + /* + * Initialize the Mem-Map and the I/O MMU so that all + * the physical memory can be accessed by the endpoint + * devices. The base bus address is set to the base CPA + * of this memory controller, so is the base VA. The + * I/O MMU table essentially translates the CPA to + * the real PA. + */ + ret = gxio_trio_init_memory_map_mmu_aux(trio_context, + controller->mem_maps[j], + start_pfn << PAGE_SHIFT, + nr_pages << PAGE_SHIFT, + trio_context->asid, + controller->mac, + start_pfn << PAGE_SHIFT, + j, + GXIO_TRIO_ORDER_MODE_UNORDERED); + if (ret < 0) { + pr_err("PCI: Mem-Map init failure on TRIO %d " + "mac %d for MC %d, give up\n", + controller->trio_index, + controller->mac, j); + + /* TBD: cleanup ... */ + + goto alloc_mem_map_failed; + } + + continue; + +alloc_mem_map_failed: + break; + } + + } + + return 0; +} +subsys_initcall(pcibios_init); + +/* + * No bus fixups needed. + */ +void __devinit pcibios_fixup_bus(struct pci_bus *bus) +{ + /* Nothing needs to be done. */ +} + +/* + * This can be called from the generic PCI layer, but doesn't need to + * do anything. + */ +char __devinit *pcibios_setup(char *str) +{ + if (!strcmp(str, "off")) { + pci_probe = 0; + return NULL; + } + return str; +} + +/* + * This is called from the generic Linux layer. + */ +void __devinit pcibios_update_irq(struct pci_dev *dev, int irq) +{ + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); +} + +/* + * Enable memory address decoding, as appropriate, for the + * device described by the 'dev' struct. The I/O decoding + * is disabled, though the TILE-Gx supports I/O addressing. + * + * This is called from the generic PCI layer, and can be called + * for bridges or endpoints. + */ +int pcibios_enable_device(struct pci_dev *dev, int mask) +{ + return pci_enable_resources(dev, mask); +} + +/* Map a PCI MMIO bus address into VA space. */ +void __iomem *ioremap(resource_size_t phys_addr, unsigned long size) +{ + struct pci_controller *controller = NULL; + resource_size_t bar_start; + resource_size_t bar_end; + resource_size_t offset; + resource_size_t start; + resource_size_t end; + int trio_fd; + int i, j; + + start = phys_addr; + end = phys_addr + size - 1; + + /* + * In the following, each PCI controller's mem_resources[1] + * represents its (non-prefetchable) PCI memory resource and + * mem_resources[2] refers to its prefetchable PCI memory resource. + * By searching phys_addr in each controller's mem_resources[], we can + * determine the controller that should accept the PCI memory access. + */ + + for (i = 0; i < num_rc_controllers; i++) { + /* + * Skip controllers that are not properly initialized or + * have down links. + */ + if (pci_controllers[i].root_bus == NULL) + continue; + + for (j = 1; j < 3; j++) { + bar_start = + pci_controllers[i].mem_resources[j].start; + bar_end = + pci_controllers[i].mem_resources[j].end; + + if ((start >= bar_start) && (end <= bar_end)) { + + controller = &pci_controllers[i]; + + goto got_it; + } + } + } + + if (controller == NULL) + return NULL; + +got_it: + trio_fd = controller->trio->fd; + + offset = HV_TRIO_PIO_OFFSET(controller->pio_mem_index) + phys_addr; + + /* + * We need to keep the PCI bus address's in-page offset in the VA. + */ + return iorpc_ioremap(trio_fd, offset, size) + + (phys_addr & (PAGE_SIZE - 1)); +} +EXPORT_SYMBOL(ioremap); + +void pci_iounmap(struct pci_dev *dev, void __iomem *addr) +{ + iounmap(addr); +} +EXPORT_SYMBOL(pci_iounmap); + +/**************************************************************** + * + * Tile PCI config space read/write routines + * + ****************************************************************/ + +/* + * These are the normal read and write ops + * These are expanded with macros from pci_bus_read_config_byte() etc. + * + * devfn is the combined PCI device & function. + * + * offset is in bytes, from the start of config space for the + * specified bus & device. + */ + +static int __devinit tile_cfg_read(struct pci_bus *bus, + unsigned int devfn, + int offset, + int size, + u32 *val) +{ + struct pci_controller *controller = bus->sysdata; + gxio_trio_context_t *trio_context = controller->trio; + int busnum = bus->number & 0xff; + int device = PCI_SLOT(devfn); + int function = PCI_FUNC(devfn); + int config_type = 1; + TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR_t cfg_addr; + void *mmio_addr; + + /* + * Map all accesses to the local device (bus == 0) into the + * MMIO space of the MAC. Accesses to the downstream devices + * go to the PIO space. + */ + if (busnum == 0) { + if (device == 0) { + /* + * This is the internal downstream P2P bridge, + * access directly. + */ + unsigned int reg_offset; + + reg_offset = ((offset & 0xFFF) << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_PROTECTED + << TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (controller->mac << + TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + mmio_addr = trio_context->mmio_base_mac + reg_offset; + + goto valid_device; + + } else { + /* + * We fake an empty device for (device > 0), + * since there is only one device on bus 0. + */ + goto invalid_device; + } + } + + /* + * Accesses to the directly attached device (bus == 1) have to be + * sent as type-0 configs. + */ + + if (busnum == 1) { + /* + * There is only one device off of our built-in P2P bridge. + */ + if (device != 0) + goto invalid_device; + + config_type = 0; + } + + cfg_addr.word = 0; + cfg_addr.reg_addr = (offset & 0xFFF); + cfg_addr.fn = function; + cfg_addr.dev = device; + cfg_addr.bus = busnum; + cfg_addr.type = config_type; + + /* + * Note that we don't set the mac field in cfg_addr because the + * mapping is per port. + */ + + mmio_addr = trio_context->mmio_base_pio_cfg[controller->mac] + + cfg_addr.word; + +valid_device: + + switch (size) { + case 4: + *val = __gxio_mmio_read32(mmio_addr); + break; + + case 2: + *val = __gxio_mmio_read16(mmio_addr); + break; + + case 1: + *val = __gxio_mmio_read8(mmio_addr); + break; + + default: + return PCIBIOS_FUNC_NOT_SUPPORTED; + } + + TRACE_CFG_RD(size, *val, busnum, device, function, offset); + + return 0; + +invalid_device: + + switch (size) { + case 4: + *val = 0xFFFFFFFF; + break; + + case 2: + *val = 0xFFFF; + break; + + case 1: + *val = 0xFF; + break; + + default: + return PCIBIOS_FUNC_NOT_SUPPORTED; + } + + return 0; +} + + +/* + * See tile_cfg_read() for relevent comments. + * Note that "val" is the value to write, not a pointer to that value. + */ +static int __devinit tile_cfg_write(struct pci_bus *bus, + unsigned int devfn, + int offset, + int size, + u32 val) +{ + struct pci_controller *controller = bus->sysdata; + gxio_trio_context_t *trio_context = controller->trio; + int busnum = bus->number & 0xff; + int device = PCI_SLOT(devfn); + int function = PCI_FUNC(devfn); + int config_type = 1; + TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR_t cfg_addr; + void *mmio_addr; + u32 val_32 = (u32)val; + u16 val_16 = (u16)val; + u8 val_8 = (u8)val; + + /* + * Map all accesses to the local device (bus == 0) into the + * MMIO space of the MAC. Accesses to the downstream devices + * go to the PIO space. + */ + if (busnum == 0) { + if (device == 0) { + /* + * This is the internal downstream P2P bridge, + * access directly. + */ + unsigned int reg_offset; + + reg_offset = ((offset & 0xFFF) << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_PROTECTED + << TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (controller->mac << + TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + mmio_addr = trio_context->mmio_base_mac + reg_offset; + + goto valid_device; + + } else { + /* + * We fake an empty device for (device > 0), + * since there is only one device on bus 0. + */ + goto invalid_device; + } + } + + /* + * Accesses to the directly attached device (bus == 1) have to be + * sent as type-0 configs. + */ + + if (busnum == 1) { + /* + * There is only one device off of our built-in P2P bridge. + */ + if (device != 0) + goto invalid_device; + + config_type = 0; + } + + cfg_addr.word = 0; + cfg_addr.reg_addr = (offset & 0xFFF); + cfg_addr.fn = function; + cfg_addr.dev = device; + cfg_addr.bus = busnum; + cfg_addr.type = config_type; + + /* + * Note that we don't set the mac field in cfg_addr because the + * mapping is per port. + */ + + mmio_addr = trio_context->mmio_base_pio_cfg[controller->mac] + + cfg_addr.word; + +valid_device: + + switch (size) { + case 4: + __gxio_mmio_write32(mmio_addr, val_32); + TRACE_CFG_WR(size, val_32, busnum, device, function, offset); + break; + + case 2: + __gxio_mmio_write16(mmio_addr, val_16); + TRACE_CFG_WR(size, val_16, busnum, device, function, offset); + break; + + case 1: + __gxio_mmio_write8(mmio_addr, val_8); + TRACE_CFG_WR(size, val_8, busnum, device, function, offset); + break; + + default: + return PCIBIOS_FUNC_NOT_SUPPORTED; + } + +invalid_device: + + return 0; +} + + +static struct pci_ops tile_cfg_ops = { + .read = tile_cfg_read, + .write = tile_cfg_write, +}; + + +/* + * MSI support starts here. + */ +static unsigned int +tilegx_msi_startup(struct irq_data *d) +{ + if (d->msi_desc) + unmask_msi_irq(d); + + return 0; +} + +static void +tilegx_msi_ack(struct irq_data *d) +{ + __insn_mtspr(SPR_IPI_EVENT_RESET_K, 1UL << d->irq); +} + +static void +tilegx_msi_mask(struct irq_data *d) +{ + mask_msi_irq(d); + __insn_mtspr(SPR_IPI_MASK_SET_K, 1UL << d->irq); +} + +static void +tilegx_msi_unmask(struct irq_data *d) +{ + __insn_mtspr(SPR_IPI_MASK_RESET_K, 1UL << d->irq); + unmask_msi_irq(d); +} + +static struct irq_chip tilegx_msi_chip = { + .name = "tilegx_msi", + .irq_startup = tilegx_msi_startup, + .irq_ack = tilegx_msi_ack, + .irq_mask = tilegx_msi_mask, + .irq_unmask = tilegx_msi_unmask, + + /* TBD: support set_affinity. */ +}; + +int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) +{ + struct pci_controller *controller; + gxio_trio_context_t *trio_context; + struct msi_msg msg; + int default_irq; + uint64_t mem_map_base; + uint64_t mem_map_limit; + u64 msi_addr; + int mem_map; + int cpu; + int irq; + int ret; + + irq = create_irq(); + if (irq < 0) + return irq; + + /* + * Since we use a 64-bit Mem-Map to accept the MSI write, we fail + * devices that are not capable of generating a 64-bit message address. + * These devices will fall back to using the legacy interrupts. + * Most PCIe endpoint devices do support 64-bit message addressing. + */ + if (desc->msi_attrib.is_64 == 0) { + dev_printk(KERN_INFO, &pdev->dev, + "64-bit MSI message address not supported, " + "falling back to legacy interrupts.\n"); + + ret = -ENOMEM; + goto is_64_failure; + } + + default_irq = desc->msi_attrib.default_irq; + controller = irq_get_handler_data(default_irq); + + BUG_ON(!controller); + + trio_context = controller->trio; + + /* + * Allocate the Mem-Map that will accept the MSI write and + * trigger the TILE-side interrupts. + */ + mem_map = gxio_trio_alloc_memory_maps(trio_context, 1, 0, 0); + if (mem_map < 0) { + dev_printk(KERN_INFO, &pdev->dev, + "%s Mem-Map alloc failure. " + "Failed to initialize MSI interrupts. " + "Falling back to legacy interrupts.\n", + desc->msi_attrib.is_msix ? "MSI-X" : "MSI"); + + ret = -ENOMEM; + goto msi_mem_map_alloc_failure; + } + + /* We try to distribute different IRQs to different tiles. */ + cpu = tile_irq_cpu(irq); + + /* + * Now call up to the HV to configure the Mem-Map interrupt and + * set up the IPI binding. + */ + mem_map_base = MEM_MAP_INTR_REGIONS_BASE + + mem_map * MEM_MAP_INTR_REGION_SIZE; + mem_map_limit = mem_map_base + MEM_MAP_INTR_REGION_SIZE - 1; + + ret = gxio_trio_config_msi_intr(trio_context, cpu_x(cpu), cpu_y(cpu), + KERNEL_PL, irq, controller->mac, + mem_map, mem_map_base, mem_map_limit, + trio_context->asid); + if (ret < 0) { + dev_printk(KERN_INFO, &pdev->dev, "HV MSI config failed.\n"); + + goto hv_msi_config_failure; + } + + irq_set_msi_desc(irq, desc); + + msi_addr = mem_map_base + TRIO_MAP_MEM_REG_INT3 - TRIO_MAP_MEM_REG_INT0; + + msg.address_hi = msi_addr >> 32; + msg.address_lo = msi_addr & 0xffffffff; + + msg.data = mem_map; + + write_msi_msg(irq, &msg); + irq_set_chip_and_handler(irq, &tilegx_msi_chip, handle_level_irq); + irq_set_handler_data(irq, controller); + + return 0; + +hv_msi_config_failure: + /* Free mem-map */ +msi_mem_map_alloc_failure: +is_64_failure: + destroy_irq(irq); + return ret; +} + +void arch_teardown_msi_irq(unsigned int irq) +{ + destroy_irq(irq); +} diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c index dd87f3420390..6d179dfcc15e 100644 --- a/arch/tile/kernel/setup.c +++ b/arch/tile/kernel/setup.c @@ -1344,6 +1344,7 @@ void __init setup_arch(char **cmdline_p) #ifdef CONFIG_PCI +#if !defined (__tilegx__) /* * Initialize the PCI structures. This is done before memory * setup so that we know whether or not a pci_reserve region @@ -1351,6 +1352,7 @@ void __init setup_arch(char **cmdline_p) */ if (tile_pci_init() == 0) pci_reserve_mb = 0; +#endif /* PCI systems reserve a region just below 4GB for mapping iomem. */ pci_reserve_end_pfn = (1 << (32 - PAGE_SHIFT)); @@ -1379,6 +1381,10 @@ void __init setup_arch(char **cmdline_p) setup_cpu(1); setup_clock(); load_hv_initrd(); + +#if defined(CONFIG_PCI) && defined (__tilegx__) + tile_pci_init(); +#endif } diff --git a/arch/tile/mm/pgtable.c b/arch/tile/mm/pgtable.c index 345edfed9fcd..de0de0c0e8a1 100644 --- a/arch/tile/mm/pgtable.c +++ b/arch/tile/mm/pgtable.c @@ -575,13 +575,6 @@ void __iomem *ioremap_prot(resource_size_t phys_addr, unsigned long size, } EXPORT_SYMBOL(ioremap_prot); -/* Map a PCI MMIO bus address into VA space. */ -void __iomem *ioremap(resource_size_t phys_addr, unsigned long size) -{ - panic("ioremap for PCI MMIO is not supported"); -} -EXPORT_SYMBOL(ioremap); - /* Unmap an MMIO VA mapping. */ void iounmap(volatile void __iomem *addr_in) { diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 194b243a2817..9478f7276512 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2143,9 +2143,9 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, quirk_unhide_mch_dev6); -#ifdef CONFIG_TILE +#ifdef CONFIG_TILEPRO /* - * The Tilera TILEmpower platform needs to set the link speed + * The Tilera TILEmpower tilepro platform needs to set the link speed * to 2.5GT(Giga-Transfers)/s (Gen 1). The default link speed * setting is 5GT/s (Gen 2). 0x98 is the Link Control2 PCIe * capability register of the PEX8624 PCIe switch. The switch @@ -2160,7 +2160,7 @@ static void __devinit quirk_tile_plx_gen1(struct pci_dev *dev) } } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8624, quirk_tile_plx_gen1); -#endif /* CONFIG_TILE */ +#endif /* CONFIG_TILEPRO */ #ifdef CONFIG_PCI_MSI /* Some chipsets do not support MSI. We cannot easily rely on setting -- cgit v1.2.3-59-g8ed1b From 3e219b91533058e242b78ac08aaa91024dd6f369 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Sun, 10 Jun 2012 21:44:35 +0200 Subject: tile: remove unused header Nothing includes memprof.h. Nothing uses the macros it defines. It seems it is just a remnant of the proposed memprof functionality, which got dropped before the Tilera architecture got added to the tree. This header can safely be removed. Signed-off-by: Paul Bolle Signed-off-by: Chris Metcalf --- arch/tile/include/asm/memprof.h | 33 --------------------------------- 1 file changed, 33 deletions(-) delete mode 100644 arch/tile/include/asm/memprof.h diff --git a/arch/tile/include/asm/memprof.h b/arch/tile/include/asm/memprof.h deleted file mode 100644 index 359949be28c1..000000000000 --- a/arch/tile/include/asm/memprof.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * The hypervisor's memory controller profiling infrastructure allows - * the programmer to find out what fraction of the available memory - * bandwidth is being consumed at each memory controller. The - * profiler provides start, stop, and clear operations to allows - * profiling over a specific time window, as well as an interface for - * reading the most recent profile values. - * - * This header declares IOCTL codes necessary to control memprof. - */ -#ifndef _ASM_TILE_MEMPROF_H -#define _ASM_TILE_MEMPROF_H - -#include - -#define MEMPROF_IOCTL_TYPE 0xB4 -#define MEMPROF_IOCTL_START _IO(MEMPROF_IOCTL_TYPE, 0) -#define MEMPROF_IOCTL_STOP _IO(MEMPROF_IOCTL_TYPE, 1) -#define MEMPROF_IOCTL_CLEAR _IO(MEMPROF_IOCTL_TYPE, 2) - -#endif /* _ASM_TILE_MEMPROF_H */ -- cgit v1.2.3-59-g8ed1b From bbaa22c3a0d0be4406d26e5a73d1e8e504787986 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Wed, 13 Jun 2012 14:46:40 -0400 Subject: tilegx pci: support I/O to arbitrarily-cached pages The tilegx PCI root complex support (currently only in linux-next) is limited to pages that are homed on cached in the default manner, i.e. "hash-for-home". This change supports delivery of I/O data to pages that are cached in other ways (locally on a particular core, uncached, user-managed incoherent, etc.). A large part of the change is supporting flushing pages from cache on particular homes so that we can transition the data that we are delivering to or from the device appropriately. The new homecache_finv* routines handle this. Some changes to page_table_range_init() were also required to make the fixmap code work correctly on tilegx; it hadn't been used there before. We also remove some stub mark_caches_evicted_*() routines that were just no-ops anyway. Signed-off-by: Chris Metcalf --- arch/tile/include/asm/cache.h | 12 ++- arch/tile/include/asm/fixmap.h | 14 ++- arch/tile/include/asm/homecache.h | 19 ++-- arch/tile/include/asm/page.h | 7 +- arch/tile/kernel/pci-dma.c | 182 ++++++++++++++++++++++++++++++-------- arch/tile/mm/homecache.c | 156 ++++++++++++++++---------------- arch/tile/mm/init.c | 59 +++++------- 7 files changed, 278 insertions(+), 171 deletions(-) diff --git a/arch/tile/include/asm/cache.h b/arch/tile/include/asm/cache.h index 392e5333dd8b..a9a529964e07 100644 --- a/arch/tile/include/asm/cache.h +++ b/arch/tile/include/asm/cache.h @@ -27,11 +27,17 @@ #define L2_CACHE_ALIGN(x) (((x)+(L2_CACHE_BYTES-1)) & -L2_CACHE_BYTES) /* - * TILE-Gx is fully coherent so we don't need to define ARCH_DMA_MINALIGN. + * TILEPro I/O is not always coherent (networking typically uses coherent + * I/O, but PCI traffic does not) and setting ARCH_DMA_MINALIGN to the + * L2 cacheline size helps ensure that kernel heap allocations are aligned. + * TILE-Gx I/O is always coherent when used on hash-for-home pages. + * + * However, it's possible at runtime to request not to use hash-for-home + * for the kernel heap, in which case the kernel will use flush-and-inval + * to manage coherence. As a result, we use L2_CACHE_BYTES for the + * DMA minimum alignment to avoid false sharing in the kernel heap. */ -#ifndef __tilegx__ #define ARCH_DMA_MINALIGN L2_CACHE_BYTES -#endif /* use the cache line size for the L2, which is where it counts */ #define SMP_CACHE_BYTES_SHIFT L2_CACHE_SHIFT diff --git a/arch/tile/include/asm/fixmap.h b/arch/tile/include/asm/fixmap.h index c66f7933beaa..e16dbf929cb5 100644 --- a/arch/tile/include/asm/fixmap.h +++ b/arch/tile/include/asm/fixmap.h @@ -45,14 +45,22 @@ * * TLB entries of such buffers will not be flushed across * task switches. - * - * We don't bother with a FIX_HOLE since above the fixmaps - * is unmapped memory in any case. */ enum fixed_addresses { +#ifdef __tilegx__ + /* + * TILEPro has unmapped memory above so the hole isn't needed, + * and in any case the hole pushes us over a single 16MB pmd. + */ + FIX_HOLE, +#endif #ifdef CONFIG_HIGHMEM FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */ FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1, +#endif +#ifdef __tilegx__ /* see homecache.c */ + FIX_HOMECACHE_BEGIN, + FIX_HOMECACHE_END = FIX_HOMECACHE_BEGIN+(NR_CPUS)-1, #endif __end_of_permanent_fixed_addresses, diff --git a/arch/tile/include/asm/homecache.h b/arch/tile/include/asm/homecache.h index a8243865d49e..7b7771328642 100644 --- a/arch/tile/include/asm/homecache.h +++ b/arch/tile/include/asm/homecache.h @@ -79,10 +79,17 @@ extern void homecache_change_page_home(struct page *, int order, int home); /* * Flush a page out of whatever cache(s) it is in. * This is more than just finv, since it properly handles waiting - * for the data to reach memory on tilepro, but it can be quite - * heavyweight, particularly on hash-for-home memory. + * for the data to reach memory, but it can be quite + * heavyweight, particularly on incoherent or immutable memory. */ -extern void homecache_flush_cache(struct page *, int order); +extern void homecache_finv_page(struct page *); + +/* + * Flush a page out of the specified home cache. + * Note that the specified home need not be the actual home of the page, + * as for example might be the case when coordinating with I/O devices. + */ +extern void homecache_finv_map_page(struct page *, int home); /* * Allocate a page with the given GFP flags, home, and optionally @@ -104,10 +111,10 @@ extern struct page *homecache_alloc_pages_node(int nid, gfp_t gfp_mask, * routines use homecache_change_page_home() to reset the home * back to the default before returning the page to the allocator. */ +void __homecache_free_pages(struct page *, unsigned int order); void homecache_free_pages(unsigned long addr, unsigned int order); -#define homecache_free_page(page) \ - homecache_free_pages((page), 0) - +#define __homecache_free_page(page) __homecache_free_pages((page), 0) +#define homecache_free_page(page) homecache_free_pages((page), 0) /* diff --git a/arch/tile/include/asm/page.h b/arch/tile/include/asm/page.h index 9d9131e5c552..dd033a4fd627 100644 --- a/arch/tile/include/asm/page.h +++ b/arch/tile/include/asm/page.h @@ -174,7 +174,9 @@ static inline __attribute_const__ int get_order(unsigned long size) #define MEM_LOW_END (HALF_VA_SPACE - 1) /* low half */ #define MEM_HIGH_START (-HALF_VA_SPACE) /* high half */ #define PAGE_OFFSET MEM_HIGH_START -#define _VMALLOC_START _AC(0xfffffff500000000, UL) /* 4 GB */ +#define FIXADDR_BASE _AC(0xfffffff400000000, UL) /* 4 GB */ +#define FIXADDR_TOP _AC(0xfffffff500000000, UL) /* 4 GB */ +#define _VMALLOC_START FIXADDR_TOP #define HUGE_VMAP_BASE _AC(0xfffffff600000000, UL) /* 4 GB */ #define MEM_SV_START _AC(0xfffffff700000000, UL) /* 256 MB */ #define MEM_SV_INTRPT MEM_SV_START @@ -185,9 +187,6 @@ static inline __attribute_const__ int get_order(unsigned long size) /* Highest DTLB address we will use */ #define KERNEL_HIGH_VADDR MEM_SV_START -/* Since we don't currently provide any fixmaps, we use an impossible VA. */ -#define FIXADDR_TOP MEM_HV_START - #else /* !__tilegx__ */ /* diff --git a/arch/tile/kernel/pci-dma.c b/arch/tile/kernel/pci-dma.c index b3ed19f8779c..9814d7082f24 100644 --- a/arch/tile/kernel/pci-dma.c +++ b/arch/tile/kernel/pci-dma.c @@ -22,9 +22,15 @@ /* Generic DMA mapping functions: */ /* - * Allocate what Linux calls "coherent" memory, which for us just - * means uncached. + * Allocate what Linux calls "coherent" memory. On TILEPro this is + * uncached memory; on TILE-Gx it is hash-for-home memory. */ +#ifdef __tilepro__ +#define PAGE_HOME_DMA PAGE_HOME_UNCACHED +#else +#define PAGE_HOME_DMA PAGE_HOME_HASH +#endif + void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, @@ -48,13 +54,13 @@ void *dma_alloc_coherent(struct device *dev, if (dma_mask <= DMA_BIT_MASK(32)) node = 0; - pg = homecache_alloc_pages_node(node, gfp, order, PAGE_HOME_UNCACHED); + pg = homecache_alloc_pages_node(node, gfp, order, PAGE_HOME_DMA); if (pg == NULL) return NULL; addr = page_to_phys(pg); if (addr + size > dma_mask) { - homecache_free_pages(addr, order); + __homecache_free_pages(pg, order); return NULL; } @@ -87,22 +93,110 @@ EXPORT_SYMBOL(dma_free_coherent); * can count on nothing having been touched. */ -/* Flush a PA range from cache page by page. */ -static void __dma_map_pa_range(dma_addr_t dma_addr, size_t size) +/* Set up a single page for DMA access. */ +static void __dma_prep_page(struct page *page, unsigned long offset, + size_t size, enum dma_data_direction direction) { - struct page *page = pfn_to_page(PFN_DOWN(dma_addr)); - size_t bytesleft = PAGE_SIZE - (dma_addr & (PAGE_SIZE - 1)); + /* + * Flush the page from cache if necessary. + * On tilegx, data is delivered to hash-for-home L3; on tilepro, + * data is delivered direct to memory. + * + * NOTE: If we were just doing DMA_TO_DEVICE we could optimize + * this to be a "flush" not a "finv" and keep some of the + * state in cache across the DMA operation, but it doesn't seem + * worth creating the necessary flush_buffer_xxx() infrastructure. + */ + int home = page_home(page); + switch (home) { + case PAGE_HOME_HASH: +#ifdef __tilegx__ + return; +#endif + break; + case PAGE_HOME_UNCACHED: +#ifdef __tilepro__ + return; +#endif + break; + case PAGE_HOME_IMMUTABLE: + /* Should be going to the device only. */ + BUG_ON(direction == DMA_FROM_DEVICE || + direction == DMA_BIDIRECTIONAL); + return; + case PAGE_HOME_INCOHERENT: + /* Incoherent anyway, so no need to work hard here. */ + return; + default: + BUG_ON(home < 0 || home >= NR_CPUS); + break; + } + homecache_finv_page(page); + +#ifdef DEBUG_ALIGNMENT + /* Warn if the region isn't cacheline aligned. */ + if (offset & (L2_CACHE_BYTES - 1) || (size & (L2_CACHE_BYTES - 1))) + pr_warn("Unaligned DMA to non-hfh memory: PA %#llx/%#lx\n", + PFN_PHYS(page_to_pfn(page)) + offset, size); +#endif +} - while ((ssize_t)size > 0) { - /* Flush the page. */ - homecache_flush_cache(page++, 0); +/* Make the page ready to be read by the core. */ +static void __dma_complete_page(struct page *page, unsigned long offset, + size_t size, enum dma_data_direction direction) +{ +#ifdef __tilegx__ + switch (page_home(page)) { + case PAGE_HOME_HASH: + /* I/O device delivered data the way the cpu wanted it. */ + break; + case PAGE_HOME_INCOHERENT: + /* Incoherent anyway, so no need to work hard here. */ + break; + case PAGE_HOME_IMMUTABLE: + /* Extra read-only copies are not a problem. */ + break; + default: + /* Flush the bogus hash-for-home I/O entries to memory. */ + homecache_finv_map_page(page, PAGE_HOME_HASH); + break; + } +#endif +} - /* Figure out if we need to continue on the next page. */ - size -= bytesleft; - bytesleft = PAGE_SIZE; +static void __dma_prep_pa_range(dma_addr_t dma_addr, size_t size, + enum dma_data_direction direction) +{ + struct page *page = pfn_to_page(PFN_DOWN(dma_addr)); + unsigned long offset = dma_addr & (PAGE_SIZE - 1); + size_t bytes = min(size, (size_t)(PAGE_SIZE - offset)); + + while (size != 0) { + __dma_prep_page(page, offset, bytes, direction); + size -= bytes; + ++page; + offset = 0; + bytes = min((size_t)PAGE_SIZE, size); + } +} + +static void __dma_complete_pa_range(dma_addr_t dma_addr, size_t size, + enum dma_data_direction direction) +{ + struct page *page = pfn_to_page(PFN_DOWN(dma_addr)); + unsigned long offset = dma_addr & (PAGE_SIZE - 1); + size_t bytes = min(size, (size_t)(PAGE_SIZE - offset)); + + while (size != 0) { + __dma_complete_page(page, offset, bytes, direction); + size -= bytes; + ++page; + offset = 0; + bytes = min((size_t)PAGE_SIZE, size); } } + /* * dma_map_single can be passed any memory address, and there appear * to be no alignment constraints. @@ -111,28 +205,29 @@ static void __dma_map_pa_range(dma_addr_t dma_addr, size_t size) * line with some other data that has been touched in the meantime. */ dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction) + enum dma_data_direction direction) { dma_addr_t dma_addr = __pa(ptr); BUG_ON(!valid_dma_direction(direction)); WARN_ON(size == 0); - __dma_map_pa_range(dma_addr, size); + __dma_prep_pa_range(dma_addr, size, direction); return dma_addr; } EXPORT_SYMBOL(dma_map_single); void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) + enum dma_data_direction direction) { BUG_ON(!valid_dma_direction(direction)); + __dma_complete_pa_range(dma_addr, size, direction); } EXPORT_SYMBOL(dma_unmap_single); int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents, - enum dma_data_direction direction) + enum dma_data_direction direction) { struct scatterlist *sg; int i; @@ -143,17 +238,25 @@ int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents, for_each_sg(sglist, sg, nents, i) { sg->dma_address = sg_phys(sg); - __dma_map_pa_range(sg->dma_address, sg->length); + __dma_prep_pa_range(sg->dma_address, sg->length, direction); } return nents; } EXPORT_SYMBOL(dma_map_sg); -void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, - enum dma_data_direction direction) +void dma_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents, + enum dma_data_direction direction) { + struct scatterlist *sg; + int i; + BUG_ON(!valid_dma_direction(direction)); + for_each_sg(sglist, sg, nents, i) { + sg->dma_address = sg_phys(sg); + __dma_complete_pa_range(sg->dma_address, sg->length, + direction); + } } EXPORT_SYMBOL(dma_unmap_sg); @@ -164,16 +267,17 @@ dma_addr_t dma_map_page(struct device *dev, struct page *page, BUG_ON(!valid_dma_direction(direction)); BUG_ON(offset + size > PAGE_SIZE); - homecache_flush_cache(page, 0); - + __dma_prep_page(page, offset, size, direction); return page_to_pa(page) + offset; } EXPORT_SYMBOL(dma_map_page); void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) + enum dma_data_direction direction) { BUG_ON(!valid_dma_direction(direction)); + __dma_complete_page(pfn_to_page(PFN_DOWN(dma_address)), + dma_address & PAGE_OFFSET, size, direction); } EXPORT_SYMBOL(dma_unmap_page); @@ -181,33 +285,33 @@ void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction direction) { BUG_ON(!valid_dma_direction(direction)); + __dma_complete_pa_range(dma_handle, size, direction); } EXPORT_SYMBOL(dma_sync_single_for_cpu); void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction direction) { - unsigned long start = PFN_DOWN(dma_handle); - unsigned long end = PFN_DOWN(dma_handle + size - 1); - unsigned long i; - - BUG_ON(!valid_dma_direction(direction)); - for (i = start; i <= end; ++i) - homecache_flush_cache(pfn_to_page(i), 0); + __dma_prep_pa_range(dma_handle, size, direction); } EXPORT_SYMBOL(dma_sync_single_for_device); -void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) +void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sglist, + int nelems, enum dma_data_direction direction) { + struct scatterlist *sg; + int i; + BUG_ON(!valid_dma_direction(direction)); - WARN_ON(nelems == 0 || sg[0].length == 0); + WARN_ON(nelems == 0 || sglist->length == 0); + + for_each_sg(sglist, sg, nelems, i) { + dma_sync_single_for_cpu(dev, sg->dma_address, + sg_dma_len(sg), direction); + } } EXPORT_SYMBOL(dma_sync_sg_for_cpu); -/* - * Flush and invalidate cache for scatterlist. - */ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sglist, int nelems, enum dma_data_direction direction) { @@ -242,8 +346,8 @@ void dma_sync_single_range_for_device(struct device *dev, EXPORT_SYMBOL(dma_sync_single_range_for_device); /* - * dma_alloc_noncoherent() returns non-cacheable memory, so there's no - * need to do any flushing here. + * dma_alloc_noncoherent() is #defined to return coherent memory, + * so there's no need to do any flushing here. */ void dma_cache_sync(struct device *dev, void *vaddr, size_t size, enum dma_data_direction direction) diff --git a/arch/tile/mm/homecache.c b/arch/tile/mm/homecache.c index dbcbdf7b8aa8..5f7868dcd6d4 100644 --- a/arch/tile/mm/homecache.c +++ b/arch/tile/mm/homecache.c @@ -64,10 +64,6 @@ early_param("noallocl2", set_noallocl2); #endif -/* Provide no-op versions of these routines to keep flush_remote() cleaner. */ -#define mark_caches_evicted_start() 0 -#define mark_caches_evicted_finish(mask, timestamp) do {} while (0) - /* * Update the irq_stat for cpus that we are going to interrupt @@ -107,7 +103,6 @@ static void hv_flush_update(const struct cpumask *cache_cpumask, * there's never any good reason for hv_flush_remote() to fail. * - Accepts a 32-bit PFN rather than a 64-bit PA, which generally * is the type that Linux wants to pass around anyway. - * - Centralizes the mark_caches_evicted() handling. * - Canonicalizes that lengths of zero make cpumasks NULL. * - Handles deferring TLB flushes for dataplane tiles. * - Tracks remote interrupts in the per-cpu irq_cpustat_t. @@ -126,7 +121,6 @@ void flush_remote(unsigned long cache_pfn, unsigned long cache_control, HV_Remote_ASID *asids, int asidcount) { int rc; - int timestamp = 0; /* happy compiler */ struct cpumask cache_cpumask_copy, tlb_cpumask_copy; struct cpumask *cache_cpumask, *tlb_cpumask; HV_PhysAddr cache_pa; @@ -157,15 +151,11 @@ void flush_remote(unsigned long cache_pfn, unsigned long cache_control, hv_flush_update(cache_cpumask, tlb_cpumask, tlb_va, tlb_length, asids, asidcount); cache_pa = (HV_PhysAddr)cache_pfn << PAGE_SHIFT; - if (cache_control & HV_FLUSH_EVICT_L2) - timestamp = mark_caches_evicted_start(); rc = hv_flush_remote(cache_pa, cache_control, cpumask_bits(cache_cpumask), tlb_va, tlb_length, tlb_pgsize, cpumask_bits(tlb_cpumask), asids, asidcount); - if (cache_control & HV_FLUSH_EVICT_L2) - mark_caches_evicted_finish(cache_cpumask, timestamp); if (rc == 0) return; cpumask_scnprintf(cache_buf, sizeof(cache_buf), &cache_cpumask_copy); @@ -180,85 +170,86 @@ void flush_remote(unsigned long cache_pfn, unsigned long cache_control, panic("Unsafe to continue."); } -void flush_remote_page(struct page *page, int order) +static void homecache_finv_page_va(void* va, int home) { - int i, pages = (1 << order); - for (i = 0; i < pages; ++i, ++page) { - void *p = kmap_atomic(page); - int hfh = 0; - int home = page_home(page); -#if CHIP_HAS_CBOX_HOME_MAP() - if (home == PAGE_HOME_HASH) - hfh = 1; - else -#endif - BUG_ON(home < 0 || home >= NR_CPUS); - finv_buffer_remote(p, PAGE_SIZE, hfh); - kunmap_atomic(p); + if (home == smp_processor_id()) { + finv_buffer_local(va, PAGE_SIZE); + } else if (home == PAGE_HOME_HASH) { + finv_buffer_remote(va, PAGE_SIZE, 1); + } else { + BUG_ON(home < 0 || home >= NR_CPUS); + finv_buffer_remote(va, PAGE_SIZE, 0); } } -void homecache_evict(const struct cpumask *mask) +void homecache_finv_map_page(struct page *page, int home) { - flush_remote(0, HV_FLUSH_EVICT_L2, mask, 0, 0, 0, NULL, NULL, 0); + unsigned long flags; + unsigned long va; + pte_t *ptep; + pte_t pte; + + if (home == PAGE_HOME_UNCACHED) + return; + local_irq_save(flags); +#ifdef CONFIG_HIGHMEM + va = __fix_to_virt(FIX_KMAP_BEGIN + kmap_atomic_idx_push() + + (KM_TYPE_NR * smp_processor_id())); +#else + va = __fix_to_virt(FIX_HOMECACHE_BEGIN + smp_processor_id()); +#endif + ptep = virt_to_pte(NULL, (unsigned long)va); + pte = pfn_pte(page_to_pfn(page), PAGE_KERNEL); + __set_pte(ptep, pte_set_home(pte, home)); + homecache_finv_page_va((void *)va, home); + __pte_clear(ptep); + hv_flush_page(va, PAGE_SIZE); +#ifdef CONFIG_HIGHMEM + kmap_atomic_idx_pop(); +#endif + local_irq_restore(flags); } -/* - * Return a mask of the cpus whose caches currently own these pages. - * The return value is whether the pages are all coherently cached - * (i.e. none are immutable, incoherent, or uncached). - */ -static int homecache_mask(struct page *page, int pages, - struct cpumask *home_mask) +static void homecache_finv_page_home(struct page *page, int home) { - int i; - int cached_coherently = 1; - cpumask_clear(home_mask); - for (i = 0; i < pages; ++i) { - int home = page_home(&page[i]); - if (home == PAGE_HOME_IMMUTABLE || - home == PAGE_HOME_INCOHERENT) { - cpumask_copy(home_mask, cpu_possible_mask); - return 0; - } -#if CHIP_HAS_CBOX_HOME_MAP() - if (home == PAGE_HOME_HASH) { - cpumask_or(home_mask, home_mask, &hash_for_home_map); - continue; - } -#endif - if (home == PAGE_HOME_UNCACHED) { - cached_coherently = 0; - continue; - } - BUG_ON(home < 0 || home >= NR_CPUS); - cpumask_set_cpu(home, home_mask); - } - return cached_coherently; + if (!PageHighMem(page) && home == page_home(page)) + homecache_finv_page_va(page_address(page), home); + else + homecache_finv_map_page(page, home); } -/* - * Return the passed length, or zero if it's long enough that we - * believe we should evict the whole L2 cache. - */ -static unsigned long cache_flush_length(unsigned long length) +static inline bool incoherent_home(int home) { - return (length >= CHIP_L2_CACHE_SIZE()) ? HV_FLUSH_EVICT_L2 : length; + return home == PAGE_HOME_IMMUTABLE || home == PAGE_HOME_INCOHERENT; } -/* Flush a page out of whatever cache(s) it is in. */ -void homecache_flush_cache(struct page *page, int order) +static void homecache_finv_page_internal(struct page *page, int force_map) { - int pages = 1 << order; - int length = cache_flush_length(pages * PAGE_SIZE); - unsigned long pfn = page_to_pfn(page); - struct cpumask home_mask; - - homecache_mask(page, pages, &home_mask); - flush_remote(pfn, length, &home_mask, 0, 0, 0, NULL, NULL, 0); - sim_validate_lines_evicted(PFN_PHYS(pfn), pages * PAGE_SIZE); + int home = page_home(page); + if (home == PAGE_HOME_UNCACHED) + return; + if (incoherent_home(home)) { + int cpu; + for_each_cpu(cpu, &cpu_cacheable_map) + homecache_finv_map_page(page, cpu); + } else if (force_map) { + /* Force if, e.g., the normal mapping is migrating. */ + homecache_finv_map_page(page, home); + } else { + homecache_finv_page_home(page, home); + } + sim_validate_lines_evicted(PFN_PHYS(page_to_pfn(page)), PAGE_SIZE); } +void homecache_finv_page(struct page *page) +{ + homecache_finv_page_internal(page, 0); +} + +void homecache_evict(const struct cpumask *mask) +{ + flush_remote(0, HV_FLUSH_EVICT_L2, mask, 0, 0, 0, NULL, NULL, 0); +} /* Report the home corresponding to a given PTE. */ static int pte_to_home(pte_t pte) @@ -441,15 +432,8 @@ struct page *homecache_alloc_pages_node(int nid, gfp_t gfp_mask, return page; } -void homecache_free_pages(unsigned long addr, unsigned int order) +void __homecache_free_pages(struct page *page, unsigned int order) { - struct page *page; - - if (addr == 0) - return; - - VM_BUG_ON(!virt_addr_valid((void *)addr)); - page = virt_to_page((void *)addr); if (put_page_testzero(page)) { homecache_change_page_home(page, order, initial_page_home()); if (order == 0) { @@ -460,3 +444,13 @@ void homecache_free_pages(unsigned long addr, unsigned int order) } } } +EXPORT_SYMBOL(__homecache_free_pages); + +void homecache_free_pages(unsigned long addr, unsigned int order) +{ + if (addr != 0) { + VM_BUG_ON(!virt_addr_valid((void *)addr)); + __homecache_free_pages(virt_to_page((void *)addr), order); + } +} +EXPORT_SYMBOL(homecache_free_pages); diff --git a/arch/tile/mm/init.c b/arch/tile/mm/init.c index 630dd2ce2afe..a2417a0a8222 100644 --- a/arch/tile/mm/init.c +++ b/arch/tile/mm/init.c @@ -150,7 +150,21 @@ void __init shatter_pmd(pmd_t *pmd) assign_pte(pmd, pte); } -#ifdef CONFIG_HIGHMEM +#ifdef __tilegx__ +static pmd_t *__init get_pmd(pgd_t pgtables[], unsigned long va) +{ + pud_t *pud = pud_offset(&pgtables[pgd_index(va)], va); + if (pud_none(*pud)) + assign_pmd(pud, alloc_pmd()); + return pmd_offset(pud, va); +} +#else +static pmd_t *__init get_pmd(pgd_t pgtables[], unsigned long va) +{ + return pmd_offset(pud_offset(&pgtables[pgd_index(va)], va), va); +} +#endif + /* * This function initializes a certain range of kernel virtual memory * with new bootmem page tables, everywhere page tables are missing in @@ -163,24 +177,17 @@ void __init shatter_pmd(pmd_t *pmd) * checking the pgd every time. */ static void __init page_table_range_init(unsigned long start, - unsigned long end, pgd_t *pgd_base) + unsigned long end, pgd_t *pgd) { - pgd_t *pgd; - int pgd_idx; unsigned long vaddr; - - vaddr = start; - pgd_idx = pgd_index(vaddr); - pgd = pgd_base + pgd_idx; - - for ( ; (pgd_idx < PTRS_PER_PGD) && (vaddr != end); pgd++, pgd_idx++) { - pmd_t *pmd = pmd_offset(pud_offset(pgd, vaddr), vaddr); + start = round_down(start, PMD_SIZE); + end = round_up(end, PMD_SIZE); + for (vaddr = start; vaddr < end; vaddr += PMD_SIZE) { + pmd_t *pmd = get_pmd(pgd, vaddr); if (pmd_none(*pmd)) assign_pte(pmd, alloc_pte()); - vaddr += PMD_SIZE; } } -#endif /* CONFIG_HIGHMEM */ #if CHIP_HAS_CBOX_HOME_MAP() @@ -404,21 +411,6 @@ static inline pgprot_t ktext_set_nocache(pgprot_t prot) return prot; } -#ifndef __tilegx__ -static pmd_t *__init get_pmd(pgd_t pgtables[], unsigned long va) -{ - return pmd_offset(pud_offset(&pgtables[pgd_index(va)], va), va); -} -#else -static pmd_t *__init get_pmd(pgd_t pgtables[], unsigned long va) -{ - pud_t *pud = pud_offset(&pgtables[pgd_index(va)], va); - if (pud_none(*pud)) - assign_pmd(pud, alloc_pmd()); - return pmd_offset(pud, va); -} -#endif - /* Temporary page table we use for staging. */ static pgd_t pgtables[PTRS_PER_PGD] __attribute__((aligned(HV_PAGE_TABLE_ALIGN))); @@ -779,9 +771,6 @@ static void __init set_non_bootmem_pages_init(void) */ void __init paging_init(void) { -#ifdef CONFIG_HIGHMEM - unsigned long vaddr, end; -#endif #ifdef __tilegx__ pud_t *pud; #endif @@ -789,14 +778,14 @@ void __init paging_init(void) kernel_physical_mapping_init(pgd_base); -#ifdef CONFIG_HIGHMEM /* * Fixed mappings, only the page table structure has to be * created - mappings will be set by set_fixmap(): */ - vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK; - end = (FIXADDR_TOP + PMD_SIZE - 1) & PMD_MASK; - page_table_range_init(vaddr, end, pgd_base); + page_table_range_init(fix_to_virt(__end_of_fixed_addresses - 1), + FIXADDR_TOP, pgd_base); + +#ifdef CONFIG_HIGHMEM permanent_kmaps_init(pgd_base); #endif -- cgit v1.2.3-59-g8ed1b From eef015c8aa74451f848307fe5f65485070533bbb Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Wed, 9 May 2012 12:26:30 -0400 Subject: arch/tile: enable ZONE_DMA for tilegx This is required for PCI root complex legacy support and USB OHCI root complex support. With this change tilegx now supports allocating memory whose PA fits in 32 bits. Signed-off-by: Chris Metcalf --- arch/tile/Kconfig | 3 +++ arch/tile/kernel/pci-dma.c | 15 +++++++++------ arch/tile/kernel/setup.c | 12 +++++++++++- arch/tile/mm/init.c | 11 +++++------ 4 files changed, 28 insertions(+), 13 deletions(-) diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index a5302d319229..0ad771f7a7e1 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -212,6 +212,9 @@ config HIGHMEM If unsure, say "true". +config ZONE_DMA + def_bool y + # We do not currently support disabling NUMA. config NUMA bool # "NUMA Memory Allocation and Scheduler Support" diff --git a/arch/tile/kernel/pci-dma.c b/arch/tile/kernel/pci-dma.c index 9814d7082f24..edd856a000c5 100644 --- a/arch/tile/kernel/pci-dma.c +++ b/arch/tile/kernel/pci-dma.c @@ -45,14 +45,17 @@ void *dma_alloc_coherent(struct device *dev, gfp |= __GFP_ZERO; /* - * By forcing NUMA node 0 for 32-bit masks we ensure that the - * high 32 bits of the resulting PA will be zero. If the mask - * size is, e.g., 24, we may still not be able to guarantee a - * suitable memory address, in which case we will return NULL. - * But such devices are uncommon. + * If the mask specifies that the memory be in the first 4 GB, then + * we force the allocation to come from the DMA zone. We also + * force the node to 0 since that's the only node where the DMA + * zone isn't empty. If the mask size is smaller than 32 bits, we + * may still not be able to guarantee a suitable memory address, in + * which case we will return NULL. But such devices are uncommon. */ - if (dma_mask <= DMA_BIT_MASK(32)) + if (dma_mask <= DMA_BIT_MASK(32)) { + gfp |= GFP_DMA; node = 0; + } pg = homecache_alloc_pages_node(node, gfp, order, PAGE_HOME_DMA); if (pg == NULL) diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c index 6d179dfcc15e..fdde3b6986e5 100644 --- a/arch/tile/kernel/setup.c +++ b/arch/tile/kernel/setup.c @@ -658,6 +658,8 @@ static void __init zone_sizes_init(void) unsigned long zones_size[MAX_NR_ZONES] = { 0 }; int size = percpu_size(); int num_cpus = smp_height * smp_width; + const unsigned long dma_end = (1UL << (32 - PAGE_SHIFT)); + int i; for (i = 0; i < num_cpus; ++i) @@ -729,6 +731,14 @@ static void __init zone_sizes_init(void) zones_size[ZONE_NORMAL] = end - start; #endif + if (start < dma_end) { + zones_size[ZONE_DMA] = min(zones_size[ZONE_NORMAL], + dma_end - start); + zones_size[ZONE_NORMAL] -= zones_size[ZONE_DMA]; + } else { + zones_size[ZONE_DMA] = 0; + } + /* Take zone metadata from controller 0 if we're isolnode. */ if (node_isset(i, isolnodes)) NODE_DATA(i)->bdata = &bootmem_node_data[0]; @@ -738,7 +748,7 @@ static void __init zone_sizes_init(void) PFN_UP(node_percpu[i])); /* Track the type of memory on each node */ - if (zones_size[ZONE_NORMAL]) + if (zones_size[ZONE_NORMAL] || zones_size[ZONE_DMA]) node_set_state(i, N_NORMAL_MEMORY); #ifdef CONFIG_HIGHMEM if (end != start) diff --git a/arch/tile/mm/init.c b/arch/tile/mm/init.c index a2417a0a8222..ef29d6c5e10e 100644 --- a/arch/tile/mm/init.c +++ b/arch/tile/mm/init.c @@ -733,16 +733,15 @@ static void __init set_non_bootmem_pages_init(void) for_each_zone(z) { unsigned long start, end; int nid = z->zone_pgdat->node_id; +#ifdef CONFIG_HIGHMEM int idx = zone_idx(z); +#endif start = z->zone_start_pfn; - if (start == 0) - continue; /* bootmem */ end = start + z->spanned_pages; - if (idx == ZONE_NORMAL) { - BUG_ON(start != node_start_pfn[nid]); - start = node_free_pfn[nid]; - } + start = max(start, node_free_pfn[nid]); + start = max(start, max_low_pfn); + #ifdef CONFIG_HIGHMEM if (idx == ZONE_HIGHMEM) totalhigh_pages += z->spanned_pages; -- cgit v1.2.3-59-g8ed1b From 41bb38fc5398ae878c799647f3c4b25374029afb Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Fri, 15 Jun 2012 15:23:06 -0400 Subject: tile pci: enable IOMMU to support DMA for legacy devices This change uses the TRIO IOMMU to map the PCI DMA space and physical memory at different addresses. We also now use the dma_mapping_ops to provide support for non-PCI DMA, PCIe DMA (64-bit) and legacy PCI DMA (32-bit). We use the kernel's software I/O TLB framework (i.e. bounce buffers) for the legacy 32-bit PCI device support since there are a limited number of TLB entries in the IOMMU and it is non-trivial to handle indexing, searching, matching, etc. For 32-bit devices the performance impact of bounce buffers should not be a concern. Signed-off-by: Chris Metcalf --- arch/tile/Kconfig | 18 ++ arch/tile/include/asm/Kbuild | 1 - arch/tile/include/asm/device.h | 33 ++++ arch/tile/include/asm/dma-mapping.h | 146 +++++++++----- arch/tile/include/asm/pci.h | 76 +++++++- arch/tile/kernel/pci-dma.c | 369 +++++++++++++++++++++++++++++------- arch/tile/kernel/pci_gx.c | 113 +++++------ arch/tile/kernel/setup.c | 35 ++-- 8 files changed, 588 insertions(+), 203 deletions(-) create mode 100644 arch/tile/include/asm/device.h diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index 0ad771f7a7e1..557e3a381ca0 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -3,6 +3,8 @@ config TILE def_bool y + select HAVE_DMA_ATTRS + select HAVE_DMA_API_DEBUG select HAVE_KVM if !TILEGX select GENERIC_FIND_FIRST_BIT select USE_GENERIC_SMP_HELPERS @@ -79,6 +81,9 @@ config ARCH_DMA_ADDR_T_64BIT config NEED_DMA_MAP_STATE def_bool y +config ARCH_HAS_DMA_SET_COHERENT_MASK + bool + config LOCKDEP_SUPPORT def_bool y @@ -215,6 +220,19 @@ config HIGHMEM config ZONE_DMA def_bool y +config IOMMU_HELPER + bool + +config NEED_SG_DMA_LENGTH + bool + +config SWIOTLB + bool + default TILEGX + select IOMMU_HELPER + select NEED_SG_DMA_LENGTH + select ARCH_HAS_DMA_SET_COHERENT_MASK + # We do not currently support disabling NUMA. config NUMA bool # "NUMA Memory Allocation and Scheduler Support" diff --git a/arch/tile/include/asm/Kbuild b/arch/tile/include/asm/Kbuild index 143473e3a0bb..fb7c65ae8de0 100644 --- a/arch/tile/include/asm/Kbuild +++ b/arch/tile/include/asm/Kbuild @@ -9,7 +9,6 @@ header-y += hardwall.h generic-y += bug.h generic-y += bugs.h generic-y += cputime.h -generic-y += device.h generic-y += div64.h generic-y += emergency-restart.h generic-y += errno.h diff --git a/arch/tile/include/asm/device.h b/arch/tile/include/asm/device.h new file mode 100644 index 000000000000..5182705bd056 --- /dev/null +++ b/arch/tile/include/asm/device.h @@ -0,0 +1,33 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * Arch specific extensions to struct device + */ + +#ifndef _ASM_TILE_DEVICE_H +#define _ASM_TILE_DEVICE_H + +struct dev_archdata { + /* DMA operations on that device */ + struct dma_map_ops *dma_ops; + + /* Offset of the DMA address from the PA. */ + dma_addr_t dma_offset; + + /* Highest DMA address that can be generated by this device. */ + dma_addr_t max_direct_dma_addr; +}; + +struct pdev_archdata { +}; + +#endif /* _ASM_TILE_DEVICE_H */ diff --git a/arch/tile/include/asm/dma-mapping.h b/arch/tile/include/asm/dma-mapping.h index eaa06d175b39..4b6247d1a315 100644 --- a/arch/tile/include/asm/dma-mapping.h +++ b/arch/tile/include/asm/dma-mapping.h @@ -20,69 +20,80 @@ #include #include -/* - * Note that on x86 and powerpc, there is a "struct dma_mapping_ops" - * that is used for all the DMA operations. For now, we don't have an - * equivalent on tile, because we only have a single way of doing DMA. - * (Tilera bug 7994 to use dma_mapping_ops.) - */ +extern struct dma_map_ops *tile_dma_map_ops; +extern struct dma_map_ops *gx_pci_dma_map_ops; +extern struct dma_map_ops *gx_legacy_pci_dma_map_ops; + +static inline struct dma_map_ops *get_dma_ops(struct device *dev) +{ + if (dev && dev->archdata.dma_ops) + return dev->archdata.dma_ops; + else + return tile_dma_map_ops; +} + +static inline dma_addr_t get_dma_offset(struct device *dev) +{ + return dev->archdata.dma_offset; +} + +static inline void set_dma_offset(struct device *dev, dma_addr_t off) +{ + dev->archdata.dma_offset = off; +} -#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) -#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) - -extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction); -extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, - size_t size, enum dma_data_direction); -extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction); -extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg, - int nhwentries, enum dma_data_direction); -extern dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction); -extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address, - size_t size, enum dma_data_direction); -extern void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, - int nelems, enum dma_data_direction); -extern void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, - int nelems, enum dma_data_direction); - - -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag); - -void dma_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle); - -extern void dma_sync_single_for_cpu(struct device *, dma_addr_t, size_t, - enum dma_data_direction); -extern void dma_sync_single_for_device(struct device *, dma_addr_t, - size_t, enum dma_data_direction); -extern void dma_sync_single_range_for_cpu(struct device *, dma_addr_t, - unsigned long offset, size_t, - enum dma_data_direction); -extern void dma_sync_single_range_for_device(struct device *, dma_addr_t, - unsigned long offset, size_t, - enum dma_data_direction); -extern void dma_cache_sync(struct device *dev, void *vaddr, size_t, - enum dma_data_direction); +static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr) +{ + return paddr + get_dma_offset(dev); +} + +static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr) +{ + return daddr - get_dma_offset(dev); +} + +static inline void dma_mark_clean(void *addr, size_t size) {} + +#include + +static inline void set_dma_ops(struct device *dev, struct dma_map_ops *ops) +{ + dev->archdata.dma_ops = ops; +} + +static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size) +{ + if (!dev->dma_mask) + return 0; + + return addr + size - 1 <= *dev->dma_mask; +} static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) { - return 0; + return get_dma_ops(dev)->mapping_error(dev, dma_addr); } static inline int dma_supported(struct device *dev, u64 mask) { - return 1; + return get_dma_ops(dev)->dma_supported(dev, mask); } static inline int dma_set_mask(struct device *dev, u64 mask) { + struct dma_map_ops *dma_ops = get_dma_ops(dev); + + /* Handle legacy PCI devices with limited memory addressability. */ + if ((dma_ops == gx_pci_dma_map_ops) && (mask <= DMA_BIT_MASK(32))) { + set_dma_ops(dev, gx_legacy_pci_dma_map_ops); + set_dma_offset(dev, 0); + if (mask > dev->archdata.max_direct_dma_addr) + mask = dev->archdata.max_direct_dma_addr; + } + if (!dev->dma_mask || !dma_supported(dev, mask)) return -EIO; @@ -91,4 +102,43 @@ dma_set_mask(struct device *dev, u64 mask) return 0; } +static inline void *dma_alloc_attrs(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag, + struct dma_attrs *attrs) +{ + struct dma_map_ops *dma_ops = get_dma_ops(dev); + void *cpu_addr; + + cpu_addr = dma_ops->alloc(dev, size, dma_handle, flag, attrs); + + debug_dma_alloc_coherent(dev, size, *dma_handle, cpu_addr); + + return cpu_addr; +} + +static inline void dma_free_attrs(struct device *dev, size_t size, + void *cpu_addr, dma_addr_t dma_handle, + struct dma_attrs *attrs) +{ + struct dma_map_ops *dma_ops = get_dma_ops(dev); + + debug_dma_free_coherent(dev, size, cpu_addr, dma_handle); + + dma_ops->free(dev, size, cpu_addr, dma_handle, attrs); +} + +#define dma_alloc_coherent(d, s, h, f) dma_alloc_attrs(d, s, h, f, NULL) +#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_attrs(d, s, h, f, NULL) +#define dma_free_coherent(d, s, v, h) dma_free_attrs(d, s, v, h, NULL) +#define dma_free_noncoherent(d, s, v, h) dma_free_attrs(d, s, v, h, NULL) + +/* + * dma_alloc_noncoherent() is #defined to return coherent memory, + * so there's no need to do any flushing here. + */ +static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size, + enum dma_data_direction direction) +{ +} + #endif /* _ASM_TILE_DMA_MAPPING_H */ diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h index 2c224c47d8ab..553b7ff018c4 100644 --- a/arch/tile/include/asm/pci.h +++ b/arch/tile/include/asm/pci.h @@ -15,6 +15,7 @@ #ifndef _ASM_TILE_PCI_H #define _ASM_TILE_PCI_H +#include #include #include #include @@ -53,6 +54,16 @@ static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {} #define TILE_NUM_PCIE 2 +/* + * The hypervisor maps the entirety of CPA-space as bus addresses, so + * bus addresses are physical addresses. The networking and block + * device layers use this boolean for bounce buffer decisions. + */ +#define PCI_DMA_BUS_IS_PHYS 1 + +/* generic pci stuff */ +#include + #else #include @@ -85,7 +96,47 @@ static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {} /* * Each Mem-Map interrupt region occupies 4KB. */ -#define MEM_MAP_INTR_REGION_SIZE (1<< TRIO_MAP_MEM_LIM__ADDR_SHIFT) +#define MEM_MAP_INTR_REGION_SIZE (1 << TRIO_MAP_MEM_LIM__ADDR_SHIFT) + +/* + * Allocate the PCI BAR window right below 4GB. + */ +#define TILE_PCI_BAR_WINDOW_TOP (1ULL << 32) + +/* + * Allocate 1GB for the PCI BAR window. + */ +#define TILE_PCI_BAR_WINDOW_SIZE (1 << 30) + +/* + * This is the highest bus address targeting the host memory that + * can be generated by legacy PCI devices with 32-bit or less + * DMA capability, dictated by the BAR window size and location. + */ +#define TILE_PCI_MAX_DIRECT_DMA_ADDRESS \ + (TILE_PCI_BAR_WINDOW_TOP - TILE_PCI_BAR_WINDOW_SIZE - 1) + +/* + * We shift the PCI bus range for all the physical memory up by the whole PA + * range. The corresponding CPA of an incoming PCI request will be the PCI + * address minus TILE_PCI_MEM_MAP_BASE_OFFSET. This also implies + * that the 64-bit capable devices will be given DMA addresses as + * the CPA plus TILE_PCI_MEM_MAP_BASE_OFFSET. To support 32-bit + * devices, we create a separate map region that handles the low + * 4GB. + */ +#define TILE_PCI_MEM_MAP_BASE_OFFSET (1ULL << CHIP_PA_WIDTH()) + +/* + * End of the PCI memory resource. + */ +#define TILE_PCI_MEM_END \ + ((1ULL << CHIP_PA_WIDTH()) + TILE_PCI_BAR_WINDOW_TOP) + +/* + * Start of the PCI memory resource. + */ +#define TILE_PCI_MEM_START (TILE_PCI_MEM_END - TILE_PCI_BAR_WINDOW_SIZE) /* * Structure of a PCI controller (host bridge) on Gx. @@ -108,6 +159,8 @@ struct pci_controller { int index; /* PCI domain number */ struct pci_bus *root_bus; + uint64_t mem_offset; /* cpu->bus memory mapping offset. */ + int last_busno; struct pci_ops *ops; @@ -126,14 +179,22 @@ extern gxio_trio_context_t trio_contexts[TILEGX_NUM_TRIO]; extern void pci_iounmap(struct pci_dev *dev, void __iomem *); -#endif /* __tilegx__ */ +extern void +pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, + struct resource *res); + +extern void +pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region); /* - * The hypervisor maps the entirety of CPA-space as bus addresses, so - * bus addresses are physical addresses. The networking and block - * device layers use this boolean for bounce buffer decisions. + * The PCI address space does not equal the physical memory address + * space (we have an IOMMU). The IDE and SCSI device layers use this + * boolean for bounce buffer decisions. */ -#define PCI_DMA_BUS_IS_PHYS 1 +#define PCI_DMA_BUS_IS_PHYS 0 + +#endif /* __tilegx__ */ int __init tile_pci_init(void); int __init pcibios_init(void); @@ -169,7 +230,4 @@ static inline int pcibios_assign_all_busses(void) /* implement the pci_ DMA API in terms of the generic device dma_ one */ #include -/* generic pci stuff */ -#include - #endif /* _ASM_TILE_PCI_H */ diff --git a/arch/tile/kernel/pci-dma.c b/arch/tile/kernel/pci-dma.c index edd856a000c5..b9fe80ec1089 100644 --- a/arch/tile/kernel/pci-dma.c +++ b/arch/tile/kernel/pci-dma.c @@ -14,6 +14,7 @@ #include #include +#include #include #include #include @@ -31,10 +32,9 @@ #define PAGE_HOME_DMA PAGE_HOME_HASH #endif -void *dma_alloc_coherent(struct device *dev, - size_t size, - dma_addr_t *dma_handle, - gfp_t gfp) +static void *tile_dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t gfp, + struct dma_attrs *attrs) { u64 dma_mask = dev->coherent_dma_mask ?: DMA_BIT_MASK(32); int node = dev_to_node(dev); @@ -68,19 +68,19 @@ void *dma_alloc_coherent(struct device *dev, } *dma_handle = addr; + return page_address(pg); } -EXPORT_SYMBOL(dma_alloc_coherent); /* - * Free memory that was allocated with dma_alloc_coherent. + * Free memory that was allocated with tile_dma_alloc_coherent. */ -void dma_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle) +static void tile_dma_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle, + struct dma_attrs *attrs) { homecache_free_pages((unsigned long)vaddr, get_order(size)); } -EXPORT_SYMBOL(dma_free_coherent); /* * The map routines "map" the specified address range for DMA @@ -199,38 +199,182 @@ static void __dma_complete_pa_range(dma_addr_t dma_addr, size_t size, } } +static int tile_dma_map_sg(struct device *dev, struct scatterlist *sglist, + int nents, enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + struct scatterlist *sg; + int i; -/* - * dma_map_single can be passed any memory address, and there appear - * to be no alignment constraints. - * - * There is a chance that the start of the buffer will share a cache - * line with some other data that has been touched in the meantime. - */ -dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction direction) + BUG_ON(!valid_dma_direction(direction)); + + WARN_ON(nents == 0 || sglist->length == 0); + + for_each_sg(sglist, sg, nents, i) { + sg->dma_address = sg_phys(sg); + __dma_prep_pa_range(sg->dma_address, sg->length, direction); +#ifdef CONFIG_NEED_SG_DMA_LENGTH + sg->dma_length = sg->length; +#endif + } + + return nents; +} + +static void tile_dma_unmap_sg(struct device *dev, struct scatterlist *sglist, + int nents, enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + struct scatterlist *sg; + int i; + + BUG_ON(!valid_dma_direction(direction)); + for_each_sg(sglist, sg, nents, i) { + sg->dma_address = sg_phys(sg); + __dma_complete_pa_range(sg->dma_address, sg->length, + direction); + } +} + +static dma_addr_t tile_dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) { - dma_addr_t dma_addr = __pa(ptr); + BUG_ON(!valid_dma_direction(direction)); + + BUG_ON(offset + size > PAGE_SIZE); + __dma_prep_page(page, offset, size, direction); + + return page_to_pa(page) + offset; +} + +static void tile_dma_unmap_page(struct device *dev, dma_addr_t dma_address, + size_t size, enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + BUG_ON(!valid_dma_direction(direction)); + + __dma_complete_page(pfn_to_page(PFN_DOWN(dma_address)), + dma_address & PAGE_OFFSET, size, direction); +} +static void tile_dma_sync_single_for_cpu(struct device *dev, + dma_addr_t dma_handle, + size_t size, + enum dma_data_direction direction) +{ BUG_ON(!valid_dma_direction(direction)); - WARN_ON(size == 0); - __dma_prep_pa_range(dma_addr, size, direction); + __dma_complete_pa_range(dma_handle, size, direction); +} - return dma_addr; +static void tile_dma_sync_single_for_device(struct device *dev, + dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction) +{ + __dma_prep_pa_range(dma_handle, size, direction); } -EXPORT_SYMBOL(dma_map_single); -void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) +static void tile_dma_sync_sg_for_cpu(struct device *dev, + struct scatterlist *sglist, int nelems, + enum dma_data_direction direction) { + struct scatterlist *sg; + int i; + BUG_ON(!valid_dma_direction(direction)); - __dma_complete_pa_range(dma_addr, size, direction); + WARN_ON(nelems == 0 || sglist->length == 0); + + for_each_sg(sglist, sg, nelems, i) { + dma_sync_single_for_cpu(dev, sg->dma_address, + sg_dma_len(sg), direction); + } } -EXPORT_SYMBOL(dma_unmap_single); -int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents, - enum dma_data_direction direction) +static void tile_dma_sync_sg_for_device(struct device *dev, + struct scatterlist *sglist, int nelems, + enum dma_data_direction direction) +{ + struct scatterlist *sg; + int i; + + BUG_ON(!valid_dma_direction(direction)); + WARN_ON(nelems == 0 || sglist->length == 0); + + for_each_sg(sglist, sg, nelems, i) { + dma_sync_single_for_device(dev, sg->dma_address, + sg_dma_len(sg), direction); + } +} + +static inline int +tile_dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return 0; +} + +static inline int +tile_dma_supported(struct device *dev, u64 mask) +{ + return 1; +} + +static struct dma_map_ops tile_default_dma_map_ops = { + .alloc = tile_dma_alloc_coherent, + .free = tile_dma_free_coherent, + .map_page = tile_dma_map_page, + .unmap_page = tile_dma_unmap_page, + .map_sg = tile_dma_map_sg, + .unmap_sg = tile_dma_unmap_sg, + .sync_single_for_cpu = tile_dma_sync_single_for_cpu, + .sync_single_for_device = tile_dma_sync_single_for_device, + .sync_sg_for_cpu = tile_dma_sync_sg_for_cpu, + .sync_sg_for_device = tile_dma_sync_sg_for_device, + .mapping_error = tile_dma_mapping_error, + .dma_supported = tile_dma_supported +}; + +struct dma_map_ops *tile_dma_map_ops = &tile_default_dma_map_ops; +EXPORT_SYMBOL(tile_dma_map_ops); + +/* Generic PCI DMA mapping functions */ + +static void *tile_pci_dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t gfp, + struct dma_attrs *attrs) +{ + int node = dev_to_node(dev); + int order = get_order(size); + struct page *pg; + dma_addr_t addr; + + gfp |= __GFP_ZERO; + + pg = homecache_alloc_pages_node(node, gfp, order, PAGE_HOME_DMA); + if (pg == NULL) + return NULL; + + addr = page_to_phys(pg); + + *dma_handle = phys_to_dma(dev, addr); + + return page_address(pg); +} + +/* + * Free memory that was allocated with tile_pci_dma_alloc_coherent. + */ +static void tile_pci_dma_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle, + struct dma_attrs *attrs) +{ + homecache_free_pages((unsigned long)vaddr, get_order(size)); +} + +static int tile_pci_dma_map_sg(struct device *dev, struct scatterlist *sglist, + int nents, enum dma_data_direction direction, + struct dma_attrs *attrs) { struct scatterlist *sg; int i; @@ -242,14 +386,20 @@ int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents, for_each_sg(sglist, sg, nents, i) { sg->dma_address = sg_phys(sg); __dma_prep_pa_range(sg->dma_address, sg->length, direction); + + sg->dma_address = phys_to_dma(dev, sg->dma_address); +#ifdef CONFIG_NEED_SG_DMA_LENGTH + sg->dma_length = sg->length; +#endif } return nents; } -EXPORT_SYMBOL(dma_map_sg); -void dma_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents, - enum dma_data_direction direction) +static void tile_pci_dma_unmap_sg(struct device *dev, + struct scatterlist *sglist, int nents, + enum dma_data_direction direction, + struct dma_attrs *attrs) { struct scatterlist *sg; int i; @@ -261,46 +411,60 @@ void dma_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents, direction); } } -EXPORT_SYMBOL(dma_unmap_sg); -dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction direction) +static dma_addr_t tile_pci_dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) { BUG_ON(!valid_dma_direction(direction)); BUG_ON(offset + size > PAGE_SIZE); __dma_prep_page(page, offset, size, direction); - return page_to_pa(page) + offset; + + return phys_to_dma(dev, page_to_pa(page) + offset); } -EXPORT_SYMBOL(dma_map_page); -void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) +static void tile_pci_dma_unmap_page(struct device *dev, dma_addr_t dma_address, + size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) { BUG_ON(!valid_dma_direction(direction)); + + dma_address = dma_to_phys(dev, dma_address); + __dma_complete_page(pfn_to_page(PFN_DOWN(dma_address)), dma_address & PAGE_OFFSET, size, direction); } -EXPORT_SYMBOL(dma_unmap_page); -void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) +static void tile_pci_dma_sync_single_for_cpu(struct device *dev, + dma_addr_t dma_handle, + size_t size, + enum dma_data_direction direction) { BUG_ON(!valid_dma_direction(direction)); + + dma_handle = dma_to_phys(dev, dma_handle); + __dma_complete_pa_range(dma_handle, size, direction); } -EXPORT_SYMBOL(dma_sync_single_for_cpu); -void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) +static void tile_pci_dma_sync_single_for_device(struct device *dev, + dma_addr_t dma_handle, + size_t size, + enum dma_data_direction + direction) { + dma_handle = dma_to_phys(dev, dma_handle); + __dma_prep_pa_range(dma_handle, size, direction); } -EXPORT_SYMBOL(dma_sync_single_for_device); -void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sglist, - int nelems, enum dma_data_direction direction) +static void tile_pci_dma_sync_sg_for_cpu(struct device *dev, + struct scatterlist *sglist, + int nelems, + enum dma_data_direction direction) { struct scatterlist *sg; int i; @@ -313,10 +477,11 @@ void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sglist, sg_dma_len(sg), direction); } } -EXPORT_SYMBOL(dma_sync_sg_for_cpu); -void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sglist, - int nelems, enum dma_data_direction direction) +static void tile_pci_dma_sync_sg_for_device(struct device *dev, + struct scatterlist *sglist, + int nelems, + enum dma_data_direction direction) { struct scatterlist *sg; int i; @@ -329,31 +494,93 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sglist, sg_dma_len(sg), direction); } } -EXPORT_SYMBOL(dma_sync_sg_for_device); -void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) +static inline int +tile_pci_dma_mapping_error(struct device *dev, dma_addr_t dma_addr) { - dma_sync_single_for_cpu(dev, dma_handle + offset, size, direction); + return 0; } -EXPORT_SYMBOL(dma_sync_single_range_for_cpu); -void dma_sync_single_range_for_device(struct device *dev, - dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) +static inline int +tile_pci_dma_supported(struct device *dev, u64 mask) { - dma_sync_single_for_device(dev, dma_handle + offset, size, direction); + return 1; } -EXPORT_SYMBOL(dma_sync_single_range_for_device); -/* - * dma_alloc_noncoherent() is #defined to return coherent memory, - * so there's no need to do any flushing here. - */ -void dma_cache_sync(struct device *dev, void *vaddr, size_t size, - enum dma_data_direction direction) +static struct dma_map_ops tile_pci_default_dma_map_ops = { + .alloc = tile_pci_dma_alloc_coherent, + .free = tile_pci_dma_free_coherent, + .map_page = tile_pci_dma_map_page, + .unmap_page = tile_pci_dma_unmap_page, + .map_sg = tile_pci_dma_map_sg, + .unmap_sg = tile_pci_dma_unmap_sg, + .sync_single_for_cpu = tile_pci_dma_sync_single_for_cpu, + .sync_single_for_device = tile_pci_dma_sync_single_for_device, + .sync_sg_for_cpu = tile_pci_dma_sync_sg_for_cpu, + .sync_sg_for_device = tile_pci_dma_sync_sg_for_device, + .mapping_error = tile_pci_dma_mapping_error, + .dma_supported = tile_pci_dma_supported +}; + +struct dma_map_ops *gx_pci_dma_map_ops = &tile_pci_default_dma_map_ops; +EXPORT_SYMBOL(gx_pci_dma_map_ops); + +/* PCI DMA mapping functions for legacy PCI devices */ + +#ifdef CONFIG_SWIOTLB +static void *tile_swiotlb_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t gfp, + struct dma_attrs *attrs) +{ + gfp |= GFP_DMA; + return swiotlb_alloc_coherent(dev, size, dma_handle, gfp); +} + +static void tile_swiotlb_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_addr, + struct dma_attrs *attrs) { + swiotlb_free_coherent(dev, size, vaddr, dma_addr); } -EXPORT_SYMBOL(dma_cache_sync); + +static struct dma_map_ops pci_swiotlb_dma_ops = { + .alloc = tile_swiotlb_alloc_coherent, + .free = tile_swiotlb_free_coherent, + .map_page = swiotlb_map_page, + .unmap_page = swiotlb_unmap_page, + .map_sg = swiotlb_map_sg_attrs, + .unmap_sg = swiotlb_unmap_sg_attrs, + .sync_single_for_cpu = swiotlb_sync_single_for_cpu, + .sync_single_for_device = swiotlb_sync_single_for_device, + .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu, + .sync_sg_for_device = swiotlb_sync_sg_for_device, + .dma_supported = swiotlb_dma_supported, + .mapping_error = swiotlb_dma_mapping_error, +}; + +struct dma_map_ops *gx_legacy_pci_dma_map_ops = &pci_swiotlb_dma_ops; +#else +struct dma_map_ops *gx_legacy_pci_dma_map_ops; +#endif +EXPORT_SYMBOL(gx_legacy_pci_dma_map_ops); + +#ifdef CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK +int dma_set_coherent_mask(struct device *dev, u64 mask) +{ + struct dma_map_ops *dma_ops = get_dma_ops(dev); + + /* Handle legacy PCI devices with limited memory addressability. */ + if (((dma_ops == gx_pci_dma_map_ops) || + (dma_ops == gx_legacy_pci_dma_map_ops)) && + (mask <= DMA_BIT_MASK(32))) { + if (mask > dev->archdata.max_direct_dma_addr) + mask = dev->archdata.max_direct_dma_addr; + } + + if (!dma_supported(dev, mask)) + return -EIO; + dev->coherent_dma_mask = mask; + return 0; +} +EXPORT_SYMBOL(dma_set_coherent_mask); +#endif diff --git a/arch/tile/kernel/pci_gx.c b/arch/tile/kernel/pci_gx.c index 1b996bb628f1..27f7ab021137 100644 --- a/arch/tile/kernel/pci_gx.c +++ b/arch/tile/kernel/pci_gx.c @@ -40,22 +40,8 @@ #include /* - * Initialization flow and process - * ------------------------------- - * - * This files containes the routines to search for PCI buses, + * This file containes the routines to search for PCI buses, * enumerate the buses, and configure any attached devices. - * - * There are two entry points here: - * 1) tile_pci_init - * This sets up the pci_controller structs, and opens the - * FDs to the hypervisor. This is called from setup_arch() early - * in the boot process. - * 2) pcibios_init - * This probes the PCI bus(es) for any attached hardware. It's - * called by subsys_initcall. All of the real work is done by the - * generic Linux PCI layer. - * */ #define DEBUG_PCI_CFG 0 @@ -110,6 +96,21 @@ static struct pci_ops tile_cfg_ops; /* Mask of CPUs that should receive PCIe interrupts. */ static struct cpumask intr_cpus_map; +/* PCI I/O space support is not implemented. */ +static struct resource pci_ioport_resource = { + .name = "PCI IO", + .start = 0, + .end = 0, + .flags = IORESOURCE_IO, +}; + +static struct resource pci_iomem_resource = { + .name = "PCI mem", + .start = TILE_PCI_MEM_START, + .end = TILE_PCI_MEM_END, + .flags = IORESOURCE_MEM, +}; + /* * We don't need to worry about the alignment of resources. */ @@ -334,8 +335,6 @@ free_irqs: } /* - * First initialization entry point, called from setup_arch(). - * * Find valid controllers and fill in pci_controller structs for each * of them. * @@ -583,10 +582,7 @@ static int __devinit setup_pcie_rc_delay(char *str) early_param("pcie_rc_delay", setup_pcie_rc_delay); /* - * Second PCI initialization entry point, called by subsys_initcall. - * - * The controllers have been set up by the time we get here, by a call to - * tile_pci_init. + * PCI initialization entry point, called by subsys_initcall. */ int __init pcibios_init(void) { @@ -594,15 +590,13 @@ int __init pcibios_init(void) LIST_HEAD(resources); int i; + tile_pci_init(); + if (num_rc_controllers == 0 && num_ep_controllers == 0) return 0; - pr_info("PCI: Probing PCI hardware\n"); - /* * We loop over all the TRIO shims and set up the MMIO mappings. - * This step can't be done in tile_pci_init because the MM subsystem - * hasn't been initialized then. */ for (i = 0; i < TILEGX_NUM_TRIO; i++) { gxio_trio_context_t *context = &trio_contexts[i]; @@ -645,9 +639,7 @@ int __init pcibios_init(void) unsigned int class_code_revision; int trio_index; int mac; -#ifndef USE_SHARED_PCIE_CONFIG_REGION int ret; -#endif if (trio_context->fd < 0) continue; @@ -802,8 +794,6 @@ int __init pcibios_init(void) pr_err("PCI: PCI CFG PIO alloc failure for mac %d " "on TRIO %d, give up\n", mac, trio_index); - /* TBD: cleanup ... */ - continue; } @@ -819,8 +809,6 @@ int __init pcibios_init(void) pr_err("PCI: PCI CFG PIO init failure for mac %d " "on TRIO %d, give up\n", mac, trio_index); - /* TBD: cleanup ... */ - continue; } @@ -837,8 +825,6 @@ int __init pcibios_init(void) pr_err("PCI: PIO map failure for mac %d on TRIO %d\n", mac, trio_index); - /* TBD: cleanup ... */ - continue; } @@ -852,7 +838,14 @@ int __init pcibios_init(void) continue; } - pci_add_resource(&resources, &iomem_resource); + /* + * The PCI memory resource is located above the PA space. + * The memory range for the PCI root bus should not overlap + * with the physical RAM + */ + pci_add_resource_offset(&resources, &iomem_resource, + 1ULL << CHIP_PA_WIDTH()); + bus = pci_scan_root_bus(NULL, 0, controller->ops, controller, &resources); controller->root_bus = bus; @@ -922,11 +915,6 @@ int __init pcibios_init(void) continue; } - /* - * We always assign 32-bit PCI bus BAR ranges. - */ - BUG_ON(bus_address_hi != 0); - /* * Alloc a PIO region for PCI memory access for each RC port. */ @@ -936,8 +924,6 @@ int __init pcibios_init(void) "give up\n", controller->trio_index, controller->mac); - /* TBD: cleanup ... */ - continue; } @@ -950,15 +936,13 @@ int __init pcibios_init(void) ret = gxio_trio_init_pio_region_aux(trio_context, controller->pio_mem_index, controller->mac, - bus_address_hi, + 0, 0); if (ret < 0) { pr_err("PCI: MEM PIO init failure on TRIO %d mac %d, " "give up\n", controller->trio_index, controller->mac); - /* TBD: cleanup ... */ - continue; } @@ -980,8 +964,6 @@ int __init pcibios_init(void) controller->trio_index, controller->mac, j); - /* TBD: cleanup ... */ - goto alloc_mem_map_failed; } @@ -991,9 +973,13 @@ int __init pcibios_init(void) * Initialize the Mem-Map and the I/O MMU so that all * the physical memory can be accessed by the endpoint * devices. The base bus address is set to the base CPA - * of this memory controller, so is the base VA. The + * of this memory controller plus an offset (see pci.h). + * The region's base VA is set to the base CPA. The * I/O MMU table essentially translates the CPA to - * the real PA. + * the real PA. Implicitly, for node 0, we create + * a separate Mem-Map region that serves as the inbound + * window for legacy 32-bit devices. This is a direct + * map of the low 4GB CPA space. */ ret = gxio_trio_init_memory_map_mmu_aux(trio_context, controller->mem_maps[j], @@ -1001,7 +987,8 @@ int __init pcibios_init(void) nr_pages << PAGE_SHIFT, trio_context->asid, controller->mac, - start_pfn << PAGE_SHIFT, + (start_pfn << PAGE_SHIFT) + + TILE_PCI_MEM_MAP_BASE_OFFSET, j, GXIO_TRIO_ORDER_MODE_UNORDERED); if (ret < 0) { @@ -1010,11 +997,8 @@ int __init pcibios_init(void) controller->trio_index, controller->mac, j); - /* TBD: cleanup ... */ - goto alloc_mem_map_failed; } - continue; alloc_mem_map_failed: @@ -1028,11 +1012,19 @@ alloc_mem_map_failed: subsys_initcall(pcibios_init); /* - * No bus fixups needed. + * PCI scan code calls the arch specific pcibios_fixup_bus() each time it scans + * a new bridge. Called after each bus is probed, but before its children are + * examined. */ void __devinit pcibios_fixup_bus(struct pci_bus *bus) { - /* Nothing needs to be done. */ + struct pci_dev *dev = bus->self; + + if (!dev) { + /* This is the root bus. */ + bus->resource[0] = &pci_ioport_resource; + bus->resource[1] = &pci_iomem_resource; + } } /* @@ -1069,6 +1061,17 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) return pci_enable_resources(dev, mask); } +/* Called for each device after PCI setup is done. */ +static void __init +pcibios_fixup_final(struct pci_dev *pdev) +{ + set_dma_ops(&pdev->dev, gx_pci_dma_map_ops); + set_dma_offset(&pdev->dev, TILE_PCI_MEM_MAP_BASE_OFFSET); + pdev->dev.archdata.max_direct_dma_addr = + TILE_PCI_MAX_DIRECT_DMA_ADDRESS; +} +DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_final); + /* Map a PCI MMIO bus address into VA space. */ void __iomem *ioremap(resource_size_t phys_addr, unsigned long size) { @@ -1127,7 +1130,7 @@ got_it: * We need to keep the PCI bus address's in-page offset in the VA. */ return iorpc_ioremap(trio_fd, offset, size) + - (phys_addr & (PAGE_SIZE - 1)); + (phys_addr & (PAGE_SIZE - 1)); } EXPORT_SYMBOL(ioremap); diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c index fdde3b6986e5..2b8b689e596d 100644 --- a/arch/tile/kernel/setup.c +++ b/arch/tile/kernel/setup.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -109,7 +110,7 @@ static unsigned int __initdata maxnodemem_pfn[MAX_NUMNODES] = { }; static nodemask_t __initdata isolnodes; -#ifdef CONFIG_PCI +#if defined(CONFIG_PCI) && !defined(__tilegx__) enum { DEFAULT_PCI_RESERVE_MB = 64 }; static unsigned int __initdata pci_reserve_mb = DEFAULT_PCI_RESERVE_MB; unsigned long __initdata pci_reserve_start_pfn = -1U; @@ -160,7 +161,7 @@ static int __init setup_isolnodes(char *str) } early_param("isolnodes", setup_isolnodes); -#ifdef CONFIG_PCI +#if defined(CONFIG_PCI) && !defined(__tilegx__) static int __init setup_pci_reserve(char* str) { unsigned long mb; @@ -171,7 +172,7 @@ static int __init setup_pci_reserve(char* str) pci_reserve_mb = mb; pr_info("Reserving %dMB for PCIE root complex mappings\n", - pci_reserve_mb); + pci_reserve_mb); return 0; } early_param("pci_reserve", setup_pci_reserve); @@ -411,7 +412,7 @@ static void __init setup_memory(void) continue; } #endif -#ifdef CONFIG_PCI +#if defined(CONFIG_PCI) && !defined(__tilegx__) /* * Blocks that overlap the pci reserved region must * have enough space to hold the maximum percpu data @@ -604,11 +605,9 @@ static void __init setup_bootmem_allocator_node(int i) /* Free all the space back into the allocator. */ free_bootmem(PFN_PHYS(start), PFN_PHYS(end - start)); -#if defined(CONFIG_PCI) +#if defined(CONFIG_PCI) && !defined(__tilegx__) /* - * Throw away any memory aliased by the PCI region. FIXME: this - * is a temporary hack to work around bug 10502, and needs to be - * fixed properly. + * Throw away any memory aliased by the PCI region. */ if (pci_reserve_start_pfn < end && pci_reserve_end_pfn > start) reserve_bootmem(PFN_PHYS(pci_reserve_start_pfn), @@ -1353,8 +1352,7 @@ void __init setup_arch(char **cmdline_p) setup_cpu_maps(); -#ifdef CONFIG_PCI -#if !defined (__tilegx__) +#if defined(CONFIG_PCI) && !defined(__tilegx__) /* * Initialize the PCI structures. This is done before memory * setup so that we know whether or not a pci_reserve region @@ -1362,7 +1360,6 @@ void __init setup_arch(char **cmdline_p) */ if (tile_pci_init() == 0) pci_reserve_mb = 0; -#endif /* PCI systems reserve a region just below 4GB for mapping iomem. */ pci_reserve_end_pfn = (1 << (32 - PAGE_SHIFT)); @@ -1384,6 +1381,10 @@ void __init setup_arch(char **cmdline_p) * any memory using the bootmem allocator. */ +#ifdef CONFIG_SWIOTLB + swiotlb_init(0); +#endif + paging_init(); setup_numa_mapping(); zone_sizes_init(); @@ -1391,10 +1392,6 @@ void __init setup_arch(char **cmdline_p) setup_cpu(1); setup_clock(); load_hv_initrd(); - -#if defined(CONFIG_PCI) && defined (__tilegx__) - tile_pci_init(); -#endif } @@ -1538,11 +1535,11 @@ static struct resource code_resource = { }; /* - * We reserve all resources above 4GB so that PCI won't try to put + * On Pro, we reserve all resources above 4GB so that PCI won't try to put * mappings above 4GB; the standard allows that for some devices but * the probing code trunates values to 32 bits. */ -#ifdef CONFIG_PCI +#if defined(CONFIG_PCI) && !defined(__tilegx__) static struct resource* __init insert_non_bus_resource(void) { @@ -1588,7 +1585,7 @@ static int __init request_standard_resources(void) enum { CODE_DELTA = MEM_SV_INTRPT - PAGE_OFFSET }; iomem_resource.end = -1LL; -#ifdef CONFIG_PCI +#if defined(CONFIG_PCI) && !defined(__tilegx__) insert_non_bus_resource(); #endif @@ -1596,7 +1593,7 @@ static int __init request_standard_resources(void) u64 start_pfn = node_start_pfn[i]; u64 end_pfn = node_end_pfn[i]; -#ifdef CONFIG_PCI +#if defined(CONFIG_PCI) && !defined(__tilegx__) if (start_pfn <= pci_reserve_start_pfn && end_pfn > pci_reserve_start_pfn) { if (end_pfn > pci_reserve_end_pfn) -- cgit v1.2.3-59-g8ed1b From d1cc1732cc62034542b042a4506d7c5043bc5e5e Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Wed, 9 May 2012 12:25:02 -0400 Subject: arch/tile: provide kernel support for the tilegx USB shim This change adds support for accessing the USB shim from within the kernel. Note that this change by itself does not allow the kernel to act as a host or as a device; it merely exposes the built-in on-chip hardware to the kernel. The and headers are empty at the moment because the kernel does not require any types or definitions specific to the tilegx USB shim; the generic USB core code is all we need. The headers are left in as stubs so that we don't need to modify the hypervisor header (drv_usb_host_intf.h) from upstream. Signed-off-by: Chris Metcalf --- arch/tile/gxio/Kconfig | 5 ++ arch/tile/gxio/Makefile | 1 + arch/tile/gxio/iorpc_usb_host.c | 99 ++++++++++++++++++++++++++++++++ arch/tile/gxio/usb_host.c | 91 +++++++++++++++++++++++++++++ arch/tile/include/arch/usb_host.h | 26 +++++++++ arch/tile/include/arch/usb_host_def.h | 19 ++++++ arch/tile/include/gxio/iorpc_usb_host.h | 46 +++++++++++++++ arch/tile/include/gxio/usb_host.h | 87 ++++++++++++++++++++++++++++ arch/tile/include/hv/drv_usb_host_intf.h | 39 +++++++++++++ 9 files changed, 413 insertions(+) create mode 100644 arch/tile/gxio/iorpc_usb_host.c create mode 100644 arch/tile/gxio/usb_host.c create mode 100644 arch/tile/include/arch/usb_host.h create mode 100644 arch/tile/include/arch/usb_host_def.h create mode 100644 arch/tile/include/gxio/iorpc_usb_host.h create mode 100644 arch/tile/include/gxio/usb_host.h create mode 100644 arch/tile/include/hv/drv_usb_host_intf.h diff --git a/arch/tile/gxio/Kconfig b/arch/tile/gxio/Kconfig index 68e1cca2cce5..d221f8d6de8b 100644 --- a/arch/tile/gxio/Kconfig +++ b/arch/tile/gxio/Kconfig @@ -21,3 +21,8 @@ config TILE_GXIO_TRIO bool select TILE_GXIO select TILE_GXIO_DMA + +# Support direct access to the TILE-Gx USB hardware from kernel space. +config TILE_GXIO_USB_HOST + bool + select TILE_GXIO diff --git a/arch/tile/gxio/Makefile b/arch/tile/gxio/Makefile index 2389ef307c73..8684bcaa74ea 100644 --- a/arch/tile/gxio/Makefile +++ b/arch/tile/gxio/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_TILE_GXIO) += iorpc_globals.o kiorpc.o obj-$(CONFIG_TILE_GXIO_DMA) += dma_queue.o obj-$(CONFIG_TILE_GXIO_MPIPE) += mpipe.o iorpc_mpipe.o iorpc_mpipe_info.o obj-$(CONFIG_TILE_GXIO_TRIO) += trio.o iorpc_trio.o +obj-$(CONFIG_TILE_GXIO_USB_HOST) += usb_host.o iorpc_usb_host.o diff --git a/arch/tile/gxio/iorpc_usb_host.c b/arch/tile/gxio/iorpc_usb_host.c new file mode 100644 index 000000000000..cf3c3cc12204 --- /dev/null +++ b/arch/tile/gxio/iorpc_usb_host.c @@ -0,0 +1,99 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* This file is machine-generated; DO NOT EDIT! */ +#include "gxio/iorpc_usb_host.h" + +struct cfg_interrupt_param { + union iorpc_interrupt interrupt; +}; + +int gxio_usb_host_cfg_interrupt(gxio_usb_host_context_t * context, int inter_x, + int inter_y, int inter_ipi, int inter_event) +{ + struct cfg_interrupt_param temp; + struct cfg_interrupt_param *params = &temp; + + params->interrupt.kernel.x = inter_x; + params->interrupt.kernel.y = inter_y; + params->interrupt.kernel.ipi = inter_ipi; + params->interrupt.kernel.event = inter_event; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), GXIO_USB_HOST_OP_CFG_INTERRUPT); +} + +EXPORT_SYMBOL(gxio_usb_host_cfg_interrupt); + +struct register_client_memory_param { + HV_PTE pte; + unsigned int flags; +}; + +int gxio_usb_host_register_client_memory(gxio_usb_host_context_t * context, + HV_PTE pte, unsigned int flags) +{ + struct register_client_memory_param temp; + struct register_client_memory_param *params = &temp; + + params->pte = pte; + params->flags = flags; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), + GXIO_USB_HOST_OP_REGISTER_CLIENT_MEMORY); +} + +EXPORT_SYMBOL(gxio_usb_host_register_client_memory); + +struct get_mmio_base_param { + HV_PTE base; +}; + +int gxio_usb_host_get_mmio_base(gxio_usb_host_context_t * context, HV_PTE *base) +{ + int __result; + struct get_mmio_base_param temp; + struct get_mmio_base_param *params = &temp; + + __result = + hv_dev_pread(context->fd, 0, (HV_VirtAddr) params, sizeof(*params), + GXIO_USB_HOST_OP_GET_MMIO_BASE); + *base = params->base; + + return __result; +} + +EXPORT_SYMBOL(gxio_usb_host_get_mmio_base); + +struct check_mmio_offset_param { + unsigned long offset; + unsigned long size; +}; + +int gxio_usb_host_check_mmio_offset(gxio_usb_host_context_t * context, + unsigned long offset, unsigned long size) +{ + struct check_mmio_offset_param temp; + struct check_mmio_offset_param *params = &temp; + + params->offset = offset; + params->size = size; + + return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params, + sizeof(*params), + GXIO_USB_HOST_OP_CHECK_MMIO_OFFSET); +} + +EXPORT_SYMBOL(gxio_usb_host_check_mmio_offset); diff --git a/arch/tile/gxio/usb_host.c b/arch/tile/gxio/usb_host.c new file mode 100644 index 000000000000..66b002f54ecc --- /dev/null +++ b/arch/tile/gxio/usb_host.c @@ -0,0 +1,91 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* + * + * Implementation of USB gxio calls. + */ + +#include +#include +#include + +#include +#include +#include +#include + +int gxio_usb_host_init(gxio_usb_host_context_t * context, int usb_index, + int is_ehci) +{ + char file[32]; + int fd; + + if (is_ehci) + snprintf(file, sizeof(file), "usb_host/%d/iorpc/ehci", + usb_index); + else + snprintf(file, sizeof(file), "usb_host/%d/iorpc/ohci", + usb_index); + + fd = hv_dev_open((HV_VirtAddr) file, 0); + if (fd < 0) { + if (fd >= GXIO_ERR_MIN && fd <= GXIO_ERR_MAX) + return fd; + else + return -ENODEV; + } + + context->fd = fd; + + // Map in the MMIO space. + context->mmio_base = + (void __force *)iorpc_ioremap(fd, 0, HV_USB_HOST_MMIO_SIZE); + + if (context->mmio_base == NULL) { + hv_dev_close(context->fd); + return -ENODEV; + } + + return 0; +} + +EXPORT_SYMBOL_GPL(gxio_usb_host_init); + +int gxio_usb_host_destroy(gxio_usb_host_context_t * context) +{ + iounmap((void __force __iomem *)(context->mmio_base)); + hv_dev_close(context->fd); + + context->mmio_base = NULL; + context->fd = -1; + + return 0; +} + +EXPORT_SYMBOL_GPL(gxio_usb_host_destroy); + +void *gxio_usb_host_get_reg_start(gxio_usb_host_context_t * context) +{ + return context->mmio_base; +} + +EXPORT_SYMBOL_GPL(gxio_usb_host_get_reg_start); + +size_t gxio_usb_host_get_reg_len(gxio_usb_host_context_t * context) +{ + return HV_USB_HOST_MMIO_SIZE; +} + +EXPORT_SYMBOL_GPL(gxio_usb_host_get_reg_len); diff --git a/arch/tile/include/arch/usb_host.h b/arch/tile/include/arch/usb_host.h new file mode 100644 index 000000000000..d09f32683962 --- /dev/null +++ b/arch/tile/include/arch/usb_host.h @@ -0,0 +1,26 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* Machine-generated file; do not edit. */ + +#ifndef __ARCH_USB_HOST_H__ +#define __ARCH_USB_HOST_H__ + +#include +#include + +#ifndef __ASSEMBLER__ +#endif /* !defined(__ASSEMBLER__) */ + +#endif /* !defined(__ARCH_USB_HOST_H__) */ diff --git a/arch/tile/include/arch/usb_host_def.h b/arch/tile/include/arch/usb_host_def.h new file mode 100644 index 000000000000..aeed7753e8e1 --- /dev/null +++ b/arch/tile/include/arch/usb_host_def.h @@ -0,0 +1,19 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* Machine-generated file; do not edit. */ + +#ifndef __ARCH_USB_HOST_DEF_H__ +#define __ARCH_USB_HOST_DEF_H__ +#endif /* !defined(__ARCH_USB_HOST_DEF_H__) */ diff --git a/arch/tile/include/gxio/iorpc_usb_host.h b/arch/tile/include/gxio/iorpc_usb_host.h new file mode 100644 index 000000000000..8622e7d126ad --- /dev/null +++ b/arch/tile/include/gxio/iorpc_usb_host.h @@ -0,0 +1,46 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* This file is machine-generated; DO NOT EDIT! */ +#ifndef __GXIO_USB_HOST_LINUX_RPC_H__ +#define __GXIO_USB_HOST_LINUX_RPC_H__ + +#include + +#include +#include +#include +#include +#include +#include +#include + +#define GXIO_USB_HOST_OP_CFG_INTERRUPT IORPC_OPCODE(IORPC_FORMAT_KERNEL_INTERRUPT, 0x1800) +#define GXIO_USB_HOST_OP_REGISTER_CLIENT_MEMORY IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x1801) +#define GXIO_USB_HOST_OP_GET_MMIO_BASE IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8000) +#define GXIO_USB_HOST_OP_CHECK_MMIO_OFFSET IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8001) + +int gxio_usb_host_cfg_interrupt(gxio_usb_host_context_t * context, int inter_x, + int inter_y, int inter_ipi, int inter_event); + +int gxio_usb_host_register_client_memory(gxio_usb_host_context_t * context, + HV_PTE pte, unsigned int flags); + +int gxio_usb_host_get_mmio_base(gxio_usb_host_context_t * context, + HV_PTE *base); + +int gxio_usb_host_check_mmio_offset(gxio_usb_host_context_t * context, + unsigned long offset, unsigned long size); + +#endif /* !__GXIO_USB_HOST_LINUX_RPC_H__ */ diff --git a/arch/tile/include/gxio/usb_host.h b/arch/tile/include/gxio/usb_host.h new file mode 100644 index 000000000000..a60a126e4565 --- /dev/null +++ b/arch/tile/include/gxio/usb_host.h @@ -0,0 +1,87 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ +#ifndef _GXIO_USB_H_ +#define _GXIO_USB_H_ + +#include "common.h" + +#include +#include + +/* + * + * An API for manipulating general-purpose I/O pins. + */ + +/* + * + * The USB shim allows access to the processor's Universal Serial Bus + * connections. + */ + +/* A context object used to manage USB hardware resources. */ +typedef struct { + + /* File descriptor for calling up to the hypervisor. */ + int fd; + + /* The VA at which our MMIO registers are mapped. */ + char *mmio_base; +} gxio_usb_host_context_t; + +/* Initialize a USB context. + * + * A properly initialized context must be obtained before any of the other + * gxio_usb_host routines may be used. + * + * @param context Pointer to a gxio_usb_host_context_t, which will be + * initialized by this routine, if it succeeds. + * @param usb_index Index of the USB shim to use. + * @param is_ehci Nonzero to use the EHCI interface; zero to use the OHCI + * intereface. + * @return Zero if the context was successfully initialized, else a + * GXIO_ERR_xxx error code. + */ +extern int gxio_usb_host_init(gxio_usb_host_context_t * context, int usb_index, + int is_ehci); + +/* Destroy a USB context. + * + * Once destroyed, a context may not be used with any gxio_usb_host routines + * other than gxio_usb_host_init(). After this routine returns, no further + * interrupts or signals requested on this context will be delivered. The + * state and configuration of the pins which had been attached to this + * context are unchanged by this operation. + * + * @param context Pointer to a gxio_usb_host_context_t. + * @return Zero if the context was successfully destroyed, else a + * GXIO_ERR_xxx error code. + */ +extern int gxio_usb_host_destroy(gxio_usb_host_context_t * context); + +/* Retrieve the address of the shim's MMIO registers. + * + * @param context Pointer to a properly initialized gxio_usb_host_context_t. + * @return The address of the shim's MMIO registers. + */ +extern void *gxio_usb_host_get_reg_start(gxio_usb_host_context_t * context); + +/* Retrieve the length of the shim's MMIO registers. + * + * @param context Pointer to a properly initialized gxio_usb_host_context_t. + * @return The length of the shim's MMIO registers. + */ +extern size_t gxio_usb_host_get_reg_len(gxio_usb_host_context_t * context); + +#endif /* _GXIO_USB_H_ */ diff --git a/arch/tile/include/hv/drv_usb_host_intf.h b/arch/tile/include/hv/drv_usb_host_intf.h new file mode 100644 index 000000000000..24ce774a3f1d --- /dev/null +++ b/arch/tile/include/hv/drv_usb_host_intf.h @@ -0,0 +1,39 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/** + * Interface definitions for the USB host driver. + */ + +#ifndef _SYS_HV_DRV_USB_HOST_INTF_H +#define _SYS_HV_DRV_USB_HOST_INTF_H + +#include + + +/** Offset for the EHCI register MMIO region. */ +#define HV_USB_HOST_MMIO_OFFSET_EHCI ((uint64_t) USB_HOST_HCCAPBASE_REG) + +/** Offset for the OHCI register MMIO region. */ +#define HV_USB_HOST_MMIO_OFFSET_OHCI ((uint64_t) USB_HOST_OHCD_HC_REVISION_REG) + +/** Size of the register MMIO region. This turns out to be the same for + * both EHCI and OHCI. */ +#define HV_USB_HOST_MMIO_SIZE ((uint64_t) 0x1000) + +/** The number of service domains supported by the USB host shim. */ +#define HV_USB_HOST_NUM_SVC_DOM 1 + + +#endif /* _SYS_HV_DRV_USB_HOST_INTF_H */ -- cgit v1.2.3-59-g8ed1b From 47fc28bff82a4dd5f6b41c97e335d10fc78a8e9a Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Wed, 9 May 2012 13:58:14 -0400 Subject: usb: add host support for the tilegx architecture This change adds OHCI and EHCI support for the tilegx's on-chip USB hardware. Signed-off-by: Chris Metcalf --- arch/tile/Kconfig | 10 ++ arch/tile/kernel/Makefile | 1 + arch/tile/kernel/usb.c | 69 +++++++++++++ drivers/usb/host/ehci-hcd.c | 5 + drivers/usb/host/ehci-tilegx.c | 214 +++++++++++++++++++++++++++++++++++++++++ drivers/usb/host/ohci-hcd.c | 5 + drivers/usb/host/ohci-tilegx.c | 203 ++++++++++++++++++++++++++++++++++++++ include/linux/usb/tilegx.h | 34 +++++++ 8 files changed, 541 insertions(+) create mode 100644 arch/tile/kernel/usb.c create mode 100644 drivers/usb/host/ehci-tilegx.c create mode 100644 drivers/usb/host/ohci-tilegx.c create mode 100644 include/linux/usb/tilegx.h diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index 557e3a381ca0..cf4bb69ea8e5 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -396,6 +396,16 @@ config NO_IOPORT source "drivers/pci/Kconfig" +config TILE_USB + tristate "Tilera USB host adapter support" + default y + depends on USB + depends on TILEGX + select TILE_GXIO_USB_HOST + ---help--- + Provides USB host adapter support for the built-in EHCI and OHCI + interfaces on TILE-Gx chips. + config HOTPLUG bool "Support for hot-pluggable devices" ---help--- diff --git a/arch/tile/kernel/Makefile b/arch/tile/kernel/Makefile index 49d4ce3cd7f4..5334be8e2538 100644 --- a/arch/tile/kernel/Makefile +++ b/arch/tile/kernel/Makefile @@ -19,3 +19,4 @@ obj-$(CONFIG_PCI) += pci_gx.o else obj-$(CONFIG_PCI) += pci.o endif +obj-$(CONFIG_TILE_USB) += usb.o diff --git a/arch/tile/kernel/usb.c b/arch/tile/kernel/usb.c new file mode 100644 index 000000000000..5af8debc6a71 --- /dev/null +++ b/arch/tile/kernel/usb.c @@ -0,0 +1,69 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * Register the Tile-Gx USB interfaces as platform devices. + * + * The actual USB driver is just some glue (in + * drivers/usb/host/[eo]hci-tilegx.c) which makes the registers available + * to the standard kernel EHCI and OHCI drivers. + */ + +#include +#include +#include +#include + +static u64 ehci_dmamask = DMA_BIT_MASK(32); + +#define USB_HOST_DEF(unit, type, dmamask) \ + static struct \ + tilegx_usb_platform_data tilegx_usb_platform_data_ ## type ## \ + hci ## unit = { \ + .dev_index = unit, \ + }; \ + \ + static struct platform_device tilegx_usb_ ## type ## hci ## unit = { \ + .name = "tilegx-" #type "hci", \ + .id = unit, \ + .dev = { \ + .dma_mask = dmamask, \ + .coherent_dma_mask = DMA_BIT_MASK(32), \ + .platform_data = \ + &tilegx_usb_platform_data_ ## type ## hci ## \ + unit, \ + }, \ + }; + +USB_HOST_DEF(0, e, &ehci_dmamask) +USB_HOST_DEF(0, o, NULL) +USB_HOST_DEF(1, e, &ehci_dmamask) +USB_HOST_DEF(1, o, NULL) + +#undef USB_HOST_DEF + +static struct platform_device *tilegx_usb_devices[] __initdata = { + &tilegx_usb_ehci0, + &tilegx_usb_ehci1, + &tilegx_usb_ohci0, + &tilegx_usb_ohci1, +}; + +/** Add our set of possible USB devices. */ +static int __init tilegx_usb_init(void) +{ + platform_add_devices(tilegx_usb_devices, + ARRAY_SIZE(tilegx_usb_devices)); + + return 0; +} +arch_initcall(tilegx_usb_init); diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 800be38c78b4..1d9401e0990a 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1349,6 +1349,11 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_msm_driver #endif +#ifdef CONFIG_TILE_USB +#include "ehci-tilegx.c" +#define PLATFORM_DRIVER ehci_hcd_tilegx_driver +#endif + #ifdef CONFIG_USB_EHCI_HCD_PMC_MSP #include "ehci-pmcmsp.c" #define PLATFORM_DRIVER ehci_hcd_msp_driver diff --git a/drivers/usb/host/ehci-tilegx.c b/drivers/usb/host/ehci-tilegx.c new file mode 100644 index 000000000000..1d215cdb9dea --- /dev/null +++ b/drivers/usb/host/ehci-tilegx.c @@ -0,0 +1,214 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* + * Tilera TILE-Gx USB EHCI host controller driver. + */ + +#include +#include +#include +#include + +#include + +#include +#include + +static void tilegx_start_ehc(void) +{ +} + +static void tilegx_stop_ehc(void) +{ +} + +static int tilegx_ehci_setup(struct usb_hcd *hcd) +{ + int ret = ehci_init(hcd); + + /* + * Some drivers do: + * + * struct ehci_hcd *ehci = hcd_to_ehci(hcd); + * ehci->need_io_watchdog = 0; + * + * here, but since this is a new driver we're going to leave the + * watchdog enabled. Later we may try to turn it off and see + * whether we run into any problems. + */ + + return ret; +} + +static const struct hc_driver ehci_tilegx_hc_driver = { + .description = hcd_name, + .product_desc = "Tile-Gx EHCI", + .hcd_priv_size = sizeof(struct ehci_hcd), + + /* + * Generic hardware linkage. + */ + .irq = ehci_irq, + .flags = HCD_MEMORY | HCD_USB2, + + /* + * Basic lifecycle operations. + */ + .reset = tilegx_ehci_setup, + .start = ehci_run, + .stop = ehci_stop, + .shutdown = ehci_shutdown, + + /* + * Managing I/O requests and associated device resources. + */ + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + .endpoint_reset = ehci_endpoint_reset, + + /* + * Scheduling support. + */ + .get_frame_number = ehci_get_frame, + + /* + * Root hub support. + */ + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +}; + +static int ehci_hcd_tilegx_drv_probe(struct platform_device *pdev) +{ + struct usb_hcd *hcd; + struct ehci_hcd *ehci; + struct tilegx_usb_platform_data *pdata = pdev->dev.platform_data; + pte_t pte = { 0 }; + int my_cpu = smp_processor_id(); + int ret; + + if (usb_disabled()) + return -ENODEV; + + /* + * Try to initialize our GXIO context; if we can't, the device + * doesn't exist. + */ + if (gxio_usb_host_init(&pdata->usb_ctx, pdata->dev_index, 1) != 0) + return -ENXIO; + + hcd = usb_create_hcd(&ehci_tilegx_hc_driver, &pdev->dev, + dev_name(&pdev->dev)); + if (!hcd) + return -ENOMEM; + + /* + * We don't use rsrc_start to map in our registers, but seems like + * we ought to set it to something, so we use the register VA. + */ + hcd->rsrc_start = + (ulong) gxio_usb_host_get_reg_start(&pdata->usb_ctx); + hcd->rsrc_len = gxio_usb_host_get_reg_len(&pdata->usb_ctx); + hcd->regs = gxio_usb_host_get_reg_start(&pdata->usb_ctx); + + tilegx_start_ehc(); + + ehci = hcd_to_ehci(hcd); + ehci->caps = hcd->regs; + ehci->regs = + hcd->regs + HC_LENGTH(ehci, readl(&ehci->caps->hc_capbase)); + /* cache this readonly data; minimize chip reads */ + ehci->hcs_params = readl(&ehci->caps->hcs_params); + + /* Create our IRQs and register them. */ + pdata->irq = create_irq(); + if (pdata->irq < 0) { + ret = -ENXIO; + goto err_no_irq; + } + + tile_irq_activate(pdata->irq, TILE_IRQ_PERCPU); + + /* Configure interrupts. */ + ret = gxio_usb_host_cfg_interrupt(&pdata->usb_ctx, + cpu_x(my_cpu), cpu_y(my_cpu), + KERNEL_PL, pdata->irq); + if (ret) { + ret = -ENXIO; + goto err_have_irq; + } + + /* Register all of our memory. */ + pte = pte_set_home(pte, PAGE_HOME_HASH); + ret = gxio_usb_host_register_client_memory(&pdata->usb_ctx, pte, 0); + if (ret) { + ret = -ENXIO; + goto err_have_irq; + } + + ret = usb_add_hcd(hcd, pdata->irq, IRQF_SHARED); + if (ret == 0) { + platform_set_drvdata(pdev, hcd); + return ret; + } + +err_have_irq: + destroy_irq(pdata->irq); +err_no_irq: + tilegx_stop_ehc(); + usb_put_hcd(hcd); + gxio_usb_host_destroy(&pdata->usb_ctx); + return ret; +} + +static int ehci_hcd_tilegx_drv_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct tilegx_usb_platform_data *pdata = pdev->dev.platform_data; + + usb_remove_hcd(hcd); + usb_put_hcd(hcd); + tilegx_stop_ehc(); + gxio_usb_host_destroy(&pdata->usb_ctx); + destroy_irq(pdata->irq); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static void ehci_hcd_tilegx_drv_shutdown(struct platform_device *pdev) +{ + usb_hcd_platform_shutdown(pdev); + ehci_hcd_tilegx_drv_remove(pdev); +} + +static struct platform_driver ehci_hcd_tilegx_driver = { + .probe = ehci_hcd_tilegx_drv_probe, + .remove = ehci_hcd_tilegx_drv_remove, + .shutdown = ehci_hcd_tilegx_drv_shutdown, + .driver = { + .name = "tilegx-ehci", + .owner = THIS_MODULE, + } +}; + +MODULE_ALIAS("platform:tilegx-ehci"); diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index e0adf5c0cf55..2b1e8d84c873 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1100,6 +1100,11 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ohci_octeon_driver #endif +#ifdef CONFIG_TILE_USB +#include "ohci-tilegx.c" +#define PLATFORM_DRIVER ohci_hcd_tilegx_driver +#endif + #ifdef CONFIG_USB_CNS3XXX_OHCI #include "ohci-cns3xxx.c" #define PLATFORM_DRIVER ohci_hcd_cns3xxx_driver diff --git a/drivers/usb/host/ohci-tilegx.c b/drivers/usb/host/ohci-tilegx.c new file mode 100644 index 000000000000..1ae7b28a71c2 --- /dev/null +++ b/drivers/usb/host/ohci-tilegx.c @@ -0,0 +1,203 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* + * Tilera TILE-Gx USB OHCI host controller driver. + */ + +#include +#include +#include +#include + +#include + +#include +#include + +static void tilegx_start_ohc(void) +{ +} + +static void tilegx_stop_ohc(void) +{ +} + +static int tilegx_ohci_start(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int ret; + + ret = ohci_init(ohci); + if (ret < 0) + return ret; + + ret = ohci_run(ohci); + if (ret < 0) { + dev_err(hcd->self.controller, "can't start %s\n", + hcd->self.bus_name); + ohci_stop(hcd); + return ret; + } + + return 0; +} + +static const struct hc_driver ohci_tilegx_hc_driver = { + .description = hcd_name, + .product_desc = "Tile-Gx OHCI", + .hcd_priv_size = sizeof(struct ohci_hcd), + + /* + * Generic hardware linkage. + */ + .irq = ohci_irq, + .flags = HCD_MEMORY | HCD_LOCAL_MEM | HCD_USB11, + + /* + * Basic lifecycle operations. + */ + .start = tilegx_ohci_start, + .stop = ohci_stop, + .shutdown = ohci_shutdown, + + /* + * Managing I/O requests and associated device resources. + */ + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + + /* + * Scheduling support. + */ + .get_frame_number = ohci_get_frame, + + /* + * Root hub support. + */ + .hub_status_data = ohci_hub_status_data, + .hub_control = ohci_hub_control, + .start_port_reset = ohci_start_port_reset, +}; + +static int ohci_hcd_tilegx_drv_probe(struct platform_device *pdev) +{ + struct usb_hcd *hcd; + struct tilegx_usb_platform_data *pdata = pdev->dev.platform_data; + pte_t pte = { 0 }; + int my_cpu = smp_processor_id(); + int ret; + + if (usb_disabled()) + return -ENODEV; + + /* + * Try to initialize our GXIO context; if we can't, the device + * doesn't exist. + */ + if (gxio_usb_host_init(&pdata->usb_ctx, pdata->dev_index, 0) != 0) + return -ENXIO; + + hcd = usb_create_hcd(&ohci_tilegx_hc_driver, &pdev->dev, + dev_name(&pdev->dev)); + if (!hcd) + return -ENOMEM; + + /* + * We don't use rsrc_start to map in our registers, but seems like + * we ought to set it to something, so we use the register VA. + */ + hcd->rsrc_start = + (ulong) gxio_usb_host_get_reg_start(&pdata->usb_ctx); + hcd->rsrc_len = gxio_usb_host_get_reg_len(&pdata->usb_ctx); + hcd->regs = gxio_usb_host_get_reg_start(&pdata->usb_ctx); + + tilegx_start_ohc(); + + /* Create our IRQs and register them. */ + pdata->irq = create_irq(); + if (pdata->irq < 0) { + ret = -ENXIO; + goto err_no_irq; + } + + tile_irq_activate(pdata->irq, TILE_IRQ_PERCPU); + + /* Configure interrupts. */ + ret = gxio_usb_host_cfg_interrupt(&pdata->usb_ctx, + cpu_x(my_cpu), cpu_y(my_cpu), + KERNEL_PL, pdata->irq); + if (ret) { + ret = -ENXIO; + goto err_have_irq; + } + + /* Register all of our memory. */ + pte = pte_set_home(pte, PAGE_HOME_HASH); + ret = gxio_usb_host_register_client_memory(&pdata->usb_ctx, pte, 0); + if (ret) { + ret = -ENXIO; + goto err_have_irq; + } + + ohci_hcd_init(hcd_to_ohci(hcd)); + + ret = usb_add_hcd(hcd, pdata->irq, IRQF_SHARED); + if (ret == 0) { + platform_set_drvdata(pdev, hcd); + return ret; + } + +err_have_irq: + destroy_irq(pdata->irq); +err_no_irq: + tilegx_stop_ohc(); + usb_put_hcd(hcd); + gxio_usb_host_destroy(&pdata->usb_ctx); + return ret; +} + +static int ohci_hcd_tilegx_drv_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct tilegx_usb_platform_data* pdata = pdev->dev.platform_data; + + usb_remove_hcd(hcd); + usb_put_hcd(hcd); + tilegx_stop_ohc(); + gxio_usb_host_destroy(&pdata->usb_ctx); + destroy_irq(pdata->irq); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static void ohci_hcd_tilegx_drv_shutdown(struct platform_device *pdev) +{ + usb_hcd_platform_shutdown(pdev); + ohci_hcd_tilegx_drv_remove(pdev); +} + +static struct platform_driver ohci_hcd_tilegx_driver = { + .probe = ohci_hcd_tilegx_drv_probe, + .remove = ohci_hcd_tilegx_drv_remove, + .shutdown = ohci_hcd_tilegx_drv_shutdown, + .driver = { + .name = "tilegx-ohci", + .owner = THIS_MODULE, + } +}; + +MODULE_ALIAS("platform:tilegx-ohci"); diff --git a/include/linux/usb/tilegx.h b/include/linux/usb/tilegx.h new file mode 100644 index 000000000000..2d65e3435680 --- /dev/null +++ b/include/linux/usb/tilegx.h @@ -0,0 +1,34 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * Structure to contain platform-specific data related to Tile-Gx USB + * controllers. + */ + +#ifndef _LINUX_USB_TILEGX_H +#define _LINUX_USB_TILEGX_H + +#include + +struct tilegx_usb_platform_data { + /* GXIO device index. */ + int dev_index; + + /* GXIO device context. */ + gxio_usb_host_context_t usb_ctx; + + /* Device IRQ. */ + unsigned int irq; +}; + +#endif /* _LINUX_USB_TILEGX_H */ -- cgit v1.2.3-59-g8ed1b From f1006257893917dfb1e0d74cb47b18c0e2908693 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Sat, 16 Jun 2012 16:41:05 -0400 Subject: bounce: allow use of bounce pool via config option The tilegx USB OHCI support needs the bounce pool since we're not using the IOMMU to handle 32-bit addresses. Signed-off-by: Chris Metcalf --- arch/tile/Kconfig | 6 ++++++ mm/bounce.c | 8 +++++--- 2 files changed, 11 insertions(+), 3 deletions(-) diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index cf4bb69ea8e5..932e4430f7f3 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -406,6 +406,12 @@ config TILE_USB Provides USB host adapter support for the built-in EHCI and OHCI interfaces on TILE-Gx chips. +# USB OHCI needs the bounce pool since tilegx will often have more +# than 4GB of memory, but we don't currently use the IOTLB to present +# a 32-bit address to OHCI. So we need to use a bounce pool instead. +config NEED_BOUNCE_POOL + def_bool USB_OHCI_HCD + config HOTPLUG bool "Support for hot-pluggable devices" ---help--- diff --git a/mm/bounce.c b/mm/bounce.c index d1be02ca1889..042086775561 100644 --- a/mm/bounce.c +++ b/mm/bounce.c @@ -24,23 +24,25 @@ static mempool_t *page_pool, *isa_page_pool; -#ifdef CONFIG_HIGHMEM +#if defined(CONFIG_HIGHMEM) || defined(CONFIG_NEED_BOUNCE_POOL) static __init int init_emergency_pool(void) { -#ifndef CONFIG_MEMORY_HOTPLUG +#if defined(CONFIG_HIGHMEM) && !defined(CONFIG_MEMORY_HOTPLUG) if (max_pfn <= max_low_pfn) return 0; #endif page_pool = mempool_create_page_pool(POOL_SIZE, 0); BUG_ON(!page_pool); - printk("highmem bounce pool size: %d pages\n", POOL_SIZE); + printk("bounce pool size: %d pages\n", POOL_SIZE); return 0; } __initcall(init_emergency_pool); +#endif +#ifdef CONFIG_HIGHMEM /* * highmem version, map in to vec */ -- cgit v1.2.3-59-g8ed1b From f6d2ce00da145ae31ec22d21daca6ca5e22b3c84 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Wed, 18 Jul 2012 12:06:19 -0400 Subject: tile: updates to pci root complex from community feedback Reviewed-by: Bjorn Helgaas Signed-off-by: Chris Metcalf --- arch/tile/include/asm/pci.h | 27 +++++---------- arch/tile/kernel/pci_gx.c | 80 +++++++++++++++++++++------------------------ arch/tile/kernel/setup.c | 4 +-- 3 files changed, 47 insertions(+), 64 deletions(-) diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h index 553b7ff018c4..302cdf71ceed 100644 --- a/arch/tile/include/asm/pci.h +++ b/arch/tile/include/asm/pci.h @@ -128,15 +128,10 @@ static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {} #define TILE_PCI_MEM_MAP_BASE_OFFSET (1ULL << CHIP_PA_WIDTH()) /* - * End of the PCI memory resource. + * Start of the PCI memory resource, which starts at the end of the + * maximum system physical RAM address. */ -#define TILE_PCI_MEM_END \ - ((1ULL << CHIP_PA_WIDTH()) + TILE_PCI_BAR_WINDOW_TOP) - -/* - * Start of the PCI memory resource. - */ -#define TILE_PCI_MEM_START (TILE_PCI_MEM_END - TILE_PCI_BAR_WINDOW_SIZE) +#define TILE_PCI_MEM_START (1ULL << CHIP_PA_WIDTH()) /* * Structure of a PCI controller (host bridge) on Gx. @@ -159,17 +154,19 @@ struct pci_controller { int index; /* PCI domain number */ struct pci_bus *root_bus; + /* PCI memory space resource for this controller. */ + struct resource mem_space; + char mem_space_name[32]; + uint64_t mem_offset; /* cpu->bus memory mapping offset. */ - int last_busno; + int first_busno; struct pci_ops *ops; /* Table that maps the INTx numbers to Linux irq numbers. */ int irq_intx_table[4]; - struct resource mem_space; - /* Address ranges that are routed to this controller/bridge. */ struct resource mem_resources[3]; }; @@ -179,14 +176,6 @@ extern gxio_trio_context_t trio_contexts[TILEGX_NUM_TRIO]; extern void pci_iounmap(struct pci_dev *dev, void __iomem *); -extern void -pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, - struct resource *res); - -extern void -pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region); - /* * The PCI address space does not equal the physical memory address * space (we have an IOMMU). The IDE and SCSI device layers use this diff --git a/arch/tile/kernel/pci_gx.c b/arch/tile/kernel/pci_gx.c index 27f7ab021137..fa75264a82ae 100644 --- a/arch/tile/kernel/pci_gx.c +++ b/arch/tile/kernel/pci_gx.c @@ -96,21 +96,6 @@ static struct pci_ops tile_cfg_ops; /* Mask of CPUs that should receive PCIe interrupts. */ static struct cpumask intr_cpus_map; -/* PCI I/O space support is not implemented. */ -static struct resource pci_ioport_resource = { - .name = "PCI IO", - .start = 0, - .end = 0, - .flags = IORESOURCE_IO, -}; - -static struct resource pci_iomem_resource = { - .name = "PCI mem", - .start = TILE_PCI_MEM_START, - .end = TILE_PCI_MEM_END, - .flags = IORESOURCE_MEM, -}; - /* * We don't need to worry about the alignment of resources. */ @@ -437,9 +422,26 @@ out: struct pci_controller *controller = &pci_controllers[i]; controller->index = i; - controller->last_busno = 0xff; controller->ops = &tile_cfg_ops; + /* + * The PCI memory resource is located above the PA space. + * For every host bridge, the BAR window or the MMIO aperture + * is in range [3GB, 4GB - 1] of a 4GB space beyond the + * PA space. + */ + + controller->mem_offset = TILE_PCI_MEM_START + + (i * TILE_PCI_BAR_WINDOW_TOP); + controller->mem_space.start = controller->mem_offset + + TILE_PCI_BAR_WINDOW_TOP - TILE_PCI_BAR_WINDOW_SIZE; + controller->mem_space.end = controller->mem_offset + + TILE_PCI_BAR_WINDOW_TOP - 1; + controller->mem_space.flags = IORESOURCE_MEM; + snprintf(controller->mem_space_name, + sizeof(controller->mem_space_name), + "PCI mem domain %d", i); + controller->mem_space.name = controller->mem_space_name; } return num_rc_controllers; @@ -588,6 +590,7 @@ int __init pcibios_init(void) { resource_size_t offset; LIST_HEAD(resources); + int next_busno; int i; tile_pci_init(); @@ -628,7 +631,7 @@ int __init pcibios_init(void) msleep(250); /* Scan all of the recorded PCI controllers. */ - for (i = 0; i < num_rc_controllers; i++) { + for (next_busno = 0, i = 0; i < num_rc_controllers; i++) { struct pci_controller *controller = &pci_controllers[i]; gxio_trio_context_t *trio_context = controller->trio; TRIO_PCIE_INTFC_PORT_CONFIG_t port_config; @@ -843,13 +846,14 @@ int __init pcibios_init(void) * The memory range for the PCI root bus should not overlap * with the physical RAM */ - pci_add_resource_offset(&resources, &iomem_resource, - 1ULL << CHIP_PA_WIDTH()); + pci_add_resource_offset(&resources, &controller->mem_space, + controller->mem_offset); - bus = pci_scan_root_bus(NULL, 0, controller->ops, + controller->first_busno = next_busno; + bus = pci_scan_root_bus(NULL, next_busno, controller->ops, controller, &resources); controller->root_bus = bus; - controller->last_busno = bus->subordinate; + next_busno = bus->subordinate + 1; } @@ -1011,20 +1015,9 @@ alloc_mem_map_failed: } subsys_initcall(pcibios_init); -/* - * PCI scan code calls the arch specific pcibios_fixup_bus() each time it scans - * a new bridge. Called after each bus is probed, but before its children are - * examined. - */ +/* Note: to be deleted after Linux 3.6 merge. */ void __devinit pcibios_fixup_bus(struct pci_bus *bus) { - struct pci_dev *dev = bus->self; - - if (!dev) { - /* This is the root bus. */ - bus->resource[0] = &pci_ioport_resource; - bus->resource[1] = &pci_iomem_resource; - } } /* @@ -1124,7 +1117,10 @@ void __iomem *ioremap(resource_size_t phys_addr, unsigned long size) got_it: trio_fd = controller->trio->fd; - offset = HV_TRIO_PIO_OFFSET(controller->pio_mem_index) + phys_addr; + /* Convert the resource start to the bus address offset. */ + start = phys_addr - controller->mem_offset; + + offset = HV_TRIO_PIO_OFFSET(controller->pio_mem_index) + start; /* * We need to keep the PCI bus address's in-page offset in the VA. @@ -1172,11 +1168,11 @@ static int __devinit tile_cfg_read(struct pci_bus *bus, void *mmio_addr; /* - * Map all accesses to the local device (bus == 0) into the + * Map all accesses to the local device on root bus into the * MMIO space of the MAC. Accesses to the downstream devices * go to the PIO space. */ - if (busnum == 0) { + if (pci_is_root_bus(bus)) { if (device == 0) { /* * This is the internal downstream P2P bridge, @@ -1205,11 +1201,11 @@ static int __devinit tile_cfg_read(struct pci_bus *bus, } /* - * Accesses to the directly attached device (bus == 1) have to be + * Accesses to the directly attached device have to be * sent as type-0 configs. */ - if (busnum == 1) { + if (busnum == (controller->first_busno + 1)) { /* * There is only one device off of our built-in P2P bridge. */ @@ -1303,11 +1299,11 @@ static int __devinit tile_cfg_write(struct pci_bus *bus, u8 val_8 = (u8)val; /* - * Map all accesses to the local device (bus == 0) into the + * Map all accesses to the local device on root bus into the * MMIO space of the MAC. Accesses to the downstream devices * go to the PIO space. */ - if (busnum == 0) { + if (pci_is_root_bus(bus)) { if (device == 0) { /* * This is the internal downstream P2P bridge, @@ -1336,11 +1332,11 @@ static int __devinit tile_cfg_write(struct pci_bus *bus, } /* - * Accesses to the directly attached device (bus == 1) have to be + * Accesses to the directly attached device have to be * sent as type-0 configs. */ - if (busnum == 1) { + if (busnum == (controller->first_busno + 1)) { /* * There is only one device off of our built-in P2P bridge. */ diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c index 2b8b689e596d..6a649a4462d3 100644 --- a/arch/tile/kernel/setup.c +++ b/arch/tile/kernel/setup.c @@ -1536,8 +1536,7 @@ static struct resource code_resource = { /* * On Pro, we reserve all resources above 4GB so that PCI won't try to put - * mappings above 4GB; the standard allows that for some devices but - * the probing code trunates values to 32 bits. + * mappings above 4GB. */ #if defined(CONFIG_PCI) && !defined(__tilegx__) static struct resource* __init @@ -1584,7 +1583,6 @@ static int __init request_standard_resources(void) int i; enum { CODE_DELTA = MEM_SV_INTRPT - PAGE_OFFSET }; - iomem_resource.end = -1LL; #if defined(CONFIG_PCI) && !defined(__tilegx__) insert_non_bus_resource(); #endif -- cgit v1.2.3-59-g8ed1b