From 6bd925a8b779b262b007d638171c80398cfbc217 Mon Sep 17 00:00:00 2001 From: "Andrei.Stefanescu@microchip.com" Date: Wed, 12 Dec 2018 11:57:11 +0000 Subject: dt-bindings: arm: atmel: describe SECUMOD usage as a GPIO controller This patch describes the Security Module's usage as a GPIO controller for its PIOBU pins. These pins have the special property of maintaining their voltage during suspend-to-mem. Signed-off-by: Andrei Stefanescu Reviewed-by: Rob Herring Signed-off-by: Linus Walleij --- Documentation/devicetree/bindings/arm/atmel-sysregs.txt | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree/bindings/arm/atmel-sysregs.txt') diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt index 4b96608ad692..14f319f694b7 100644 --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt @@ -158,14 +158,24 @@ Security Module (SECUMOD) The Security Module macrocell provides all necessary secure functions to avoid voltage, temperature, frequency and mechanical attacks on the chip. It also -embeds secure memories that can be scrambled +embeds secure memories that can be scrambled. + +The Security Module also offers the PIOBU pins which can be used as GPIO pins. +Note that they maintain their voltage during Backup/Self-refresh. required properties: - compatible: Should be "atmel,-secumod", "syscon". can be "sama5d2". - reg: Should contain registers location and length +- gpio-controller: Marks the port as GPIO controller. +- #gpio-cells: There are 2. The pin number is the + first, the second represents additional + parameters such as GPIO_ACTIVE_HIGH/LOW. + secumod@fc040000 { compatible = "atmel,sama5d2-secumod", "syscon"; reg = <0xfc040000 0x100>; + gpio-controller; + #gpio-cells = <2>; }; -- cgit v1.2.3-59-g8ed1b