From af36ddc988922adc00221b37662120cd78f4aa7d Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 4 Jun 2017 10:50:06 +0200 Subject: ata: Add DT bindings for Faraday Technology FTIDE010 This adds device tree bindings for the Faraday Technology FTIDE010 found in the Storlink/Storm/Cortina Systems Gemini SoC. I am not 100% sure that this part is from Faraday Technology but a lot points in that direction: - A later IDE interface called FTIDE020 exist and share some properties. - The SATA bridge has the same Built In Self Test (BIST) that the Faraday FTSATA100 seems to have, and it has version number 0100 in the device ID register, so this is very likely a FTSATA100 bundled with the FTIDE010. Cc: devicetree@vger.kernel.org Cc: John Feng-Hsin Chiang Cc: Greentime Hu Acked-by: Hans Ulli Kroll Acked-by: Rob Herring Signed-off-by: Linus Walleij Signed-off-by: Tejun Heo --- .../devicetree/bindings/ata/faraday,ftide010.txt | 38 ++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 Documentation/devicetree/bindings/ata/faraday,ftide010.txt (limited to 'Documentation/devicetree/bindings/ata') diff --git a/Documentation/devicetree/bindings/ata/faraday,ftide010.txt b/Documentation/devicetree/bindings/ata/faraday,ftide010.txt new file mode 100644 index 000000000000..a0c64a29104d --- /dev/null +++ b/Documentation/devicetree/bindings/ata/faraday,ftide010.txt @@ -0,0 +1,38 @@ +* Faraday Technology FTIDE010 PATA controller + +This controller is the first Faraday IDE interface block, used in the +StorLink SL2312 and SL3516, later known as the Cortina Systems Gemini +platform. The controller can do PIO modes 0 through 4, Multi-word DMA +(MWDM)modes 0 through 2 and Ultra DMA modes 0 through 6. + +On the Gemini platform, this PATA block is accompanied by a PATA to +SATA bridge in order to support SATA. This is why a phandle to that +controller is compulsory on that platform. + +The timing properties are unique per-SoC, not per-board. + +Required properties: +- compatible: should be one of + "cortina,gemini-pata", "faraday,ftide010" + "faraday,ftide010" +- interrupts: interrupt for the block +- reg: registers and size for the block + +Optional properties: +- clocks: a SoC clock running the peripheral. +- clock-names: should be set to "PCLK" for the peripheral clock. + +Required properties for "cortina,gemini-pata" compatible: +- sata: a phande to the Gemini PATA to SATA bridge, see + cortina,gemini-sata-bridge.txt for details. + +Example: + +ata@63000000 { + compatible = "cortina,gemini-pata", "faraday,ftide010"; + reg = <0x63000000 0x100>; + interrupts = <4 IRQ_TYPE_EDGE_RISING>; + clocks = <&gcc GEMINI_CLK_GATE_IDE>; + clock-names = "PCLK"; + sata = <&sata>; +}; -- cgit v1.2.3-59-g8ed1b