From a8ca1b28acf543143bb96f62eb1423164accaa53 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Tue, 12 Apr 2016 17:07:36 +0200 Subject: dt-bindings: tegra: Rename some bindings for consistency Device tree binding for NVIDIA Tegra have traditionally carried the "nvidia," vendor prefix in the filename. A couple of odd ones don't, so fix them up for consistency. Also rename existing bindings to reflect the first compatible value that they document. This wasn't done consistently either. Acked-by: Stephen Warren Signed-off-by: Thierry Reding Signed-off-by: Rob Herring --- .../bindings/ata/nvidia,tegra124-ahci.txt | 32 ++++++++++++++++++++++ .../devicetree/bindings/ata/tegra-sata.txt | 32 ---------------------- 2 files changed, 32 insertions(+), 32 deletions(-) create mode 100644 Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt delete mode 100644 Documentation/devicetree/bindings/ata/tegra-sata.txt (limited to 'Documentation/devicetree/bindings/ata') diff --git a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt new file mode 100644 index 000000000000..66c83c3e8915 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt @@ -0,0 +1,32 @@ +Tegra124 SoC SATA AHCI controller + +Required properties : +- compatible : For Tegra124, must contain "nvidia,tegra124-ahci". Otherwise, + must contain '"nvidia,-ahci", "nvidia,tegra124-ahci"', where + is tegra132. +- reg : Should contain 2 entries: + - AHCI register set (SATA BAR5) + - SATA register set +- interrupts : Defines the interrupt used by SATA +- clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names : Must include the following entries: + - sata + - sata-oob + - cml1 + - pll_e +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - sata + - sata-oob + - sata-cold +- phys : Must contain an entry for each entry in phy-names. + See ../phy/phy-bindings.txt for details. +- phy-names : Must include the following entries: + - sata-phy : XUSB PADCTL SATA PHY +- hvdd-supply : Defines the SATA HVDD regulator +- vddio-supply : Defines the SATA VDDIO regulator +- avdd-supply : Defines the SATA AVDD regulator +- target-5v-supply : Defines the SATA 5V power regulator +- target-12v-supply : Defines the SATA 12V power regulator diff --git a/Documentation/devicetree/bindings/ata/tegra-sata.txt b/Documentation/devicetree/bindings/ata/tegra-sata.txt deleted file mode 100644 index 66c83c3e8915..000000000000 --- a/Documentation/devicetree/bindings/ata/tegra-sata.txt +++ /dev/null @@ -1,32 +0,0 @@ -Tegra124 SoC SATA AHCI controller - -Required properties : -- compatible : For Tegra124, must contain "nvidia,tegra124-ahci". Otherwise, - must contain '"nvidia,-ahci", "nvidia,tegra124-ahci"', where - is tegra132. -- reg : Should contain 2 entries: - - AHCI register set (SATA BAR5) - - SATA register set -- interrupts : Defines the interrupt used by SATA -- clocks : Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names : Must include the following entries: - - sata - - sata-oob - - cml1 - - pll_e -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - sata - - sata-oob - - sata-cold -- phys : Must contain an entry for each entry in phy-names. - See ../phy/phy-bindings.txt for details. -- phy-names : Must include the following entries: - - sata-phy : XUSB PADCTL SATA PHY -- hvdd-supply : Defines the SATA HVDD regulator -- vddio-supply : Defines the SATA VDDIO regulator -- avdd-supply : Defines the SATA AVDD regulator -- target-5v-supply : Defines the SATA 5V power regulator -- target-12v-supply : Defines the SATA 12V power regulator -- cgit v1.2.3-59-g8ed1b