From 45be9dc52eb4b9ec6f98da9263c8fcb39fbd86b3 Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Wed, 17 Jan 2018 15:04:45 +0530 Subject: dt-bindings: display: msm/dsi: Remove unused properties "qcom,dsi-host-index" and "qcom,dsi-phy-index" DT props aren't acceptable and have never been used in any DT files. Remove them. Cc: Rob Herring Cc: devicetree@vger.kernel.org Signed-off-by: Archit Taneja Reviewed-by: Rob Herring Signed-off-by: Rob Clark --- Documentation/devicetree/bindings/display/msm/dsi.txt | 4 ---- 1 file changed, 4 deletions(-) (limited to 'Documentation/devicetree/bindings/display/msm/dsi.txt') diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt index a6671bd2c85a..457c688736be 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi.txt +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt @@ -7,8 +7,6 @@ Required properties: - reg: Physical base address and length of the registers of controller - reg-names: The names of register regions. The following regions are required: * "dsi_ctrl" -- qcom,dsi-host-index: The ID of DSI controller hardware instance. This should - be 0 or 1, since we have 2 DSI controllers at most for now. - interrupts: The interrupt signal from the DSI block. - power-domains: Should be <&mmcc MDSS_GDSC>. - clocks: Phandles to device clocks. @@ -96,8 +94,6 @@ Required properties: * "dsi_phy_regulator" - clock-cells: Must be 1. The DSI PHY block acts as a clock provider, creating 2 clocks: A byte clock (index 0), and a pixel clock (index 1). -- qcom,dsi-phy-index: The ID of DSI PHY hardware instance. This should - be 0 or 1, since we have 2 DSI PHYs at most for now. - power-domains: Should be <&mmcc MDSS_GDSC>. - clocks: Phandles to device clocks. See [1] for details on clock bindings. - clock-names: the following clocks are required: -- cgit v1.2.3-59-g8ed1b