From 674c9e198c57930d6616007ba853f22df6657f72 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 23 Oct 2018 09:46:29 +0200 Subject: drm/panel: Add DT bindings for Samsung S6D16D0 This adds the device tree bindings for the Samsung S6D16D0 panel. This is a command mode only panel using DSI. Cc: devicetree@vger.kernel.org Cc: Andrzej Hajda Acked-by: Sam Ravnborg Reviewed-by: Rob Herring Signed-off-by: Linus Walleij Link: https://patchwork.freedesktop.org/patch/msgid/20181023074630.29186-1-linus.walleij@linaro.org --- .../bindings/display/panel/samsung,s6d16d0.txt | 30 ++++++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt (limited to 'Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt') diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt new file mode 100644 index 000000000000..b94e366f451b --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.txt @@ -0,0 +1,30 @@ +Samsung S6D16D0 4" 864x480 AMOLED panel + +Required properties: + - compatible: should be: + "samsung,s6d16d0", + - reg: the virtual channel number of a DSI peripheral + - vdd1-supply: I/O voltage supply + - reset-gpios: a GPIO spec for the reset pin (active low) + +The device node can contain one 'port' child node with one child +'endpoint' node, according to the bindings defined in +media/video-interfaces.txt. This node should describe panel's video bus. + +Example: +&dsi { + ... + + panel@0 { + compatible = "samsung,s6d16d0"; + reg = <0>; + vdd1-supply = <&foo>; + reset-gpios = <&foo_gpio 0 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; -- cgit v1.2.3-59-g8ed1b