From e32a1f30b67521335aa1869263bf9220b5df2b83 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Thu, 28 Dec 2017 11:49:11 +0100 Subject: dt-bindings: at24: fix formatting and style Make formatting and style consistent for the entire document. This patch doesn't change the content of the binding. Signed-off-by: Bartosz Golaszewski Reviewed-by: Javier Martinez Canillas Reviewed-by: Rob Herring --- Documentation/devicetree/bindings/eeprom/at24.txt | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'Documentation/devicetree/bindings/eeprom') diff --git a/Documentation/devicetree/bindings/eeprom/at24.txt b/Documentation/devicetree/bindings/eeprom/at24.txt index 5ac18ce2e8cd..07a289ba831d 100644 --- a/Documentation/devicetree/bindings/eeprom/at24.txt +++ b/Documentation/devicetree/bindings/eeprom/at24.txt @@ -39,23 +39,23 @@ Required properties: "renesas,r1ex24002" - the fallback is "atmel,24c02" - - reg : the I2C address of the EEPROM + - reg: The I2C address of the EEPROM. Optional properties: - - pagesize : the length of the pagesize for writing. Please consult the - manual of your device, that value varies a lot. A wrong value - may result in data loss! If not specified, a safety value of - '1' is used which will be very slow. + - pagesize: The length of the pagesize for writing. Please consult the + manual of your device, that value varies a lot. A wrong value + may result in data loss! If not specified, a safety value of + '1' is used which will be very slow. - - read-only: this parameterless property disables writes to the eeprom + - read-only: This parameterless property disables writes to the eeprom. - - size: total eeprom size in bytes + - size: Total eeprom size in bytes. - - no-read-rollover: - This parameterless property indicates that the multi-address - eeprom does not automatically roll over reads to the next - slave address. Please consult the manual of your device. + - no-read-rollover: This parameterless property indicates that the + multi-address eeprom does not automatically roll over + reads to the next slave address. Please consult the + manual of your device. - wp-gpios: GPIO to which the write-protect pin of the chip is connected. -- cgit v1.2.3-59-g8ed1b