From 41a14623bd7345017b62f167110cf95808a4891a Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Mon, 8 Sep 2014 15:52:08 +0200 Subject: drm: sti: allow to change hdmi ddc i2c adapter Depending of the board configuration i2c for ddc could change, this patch allow to use a phandle to specify which i2c controller to use. Signed-off-by: Benjamin Gaignard --- Documentation/devicetree/bindings/gpu/st,stih4xx.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree/bindings/gpu/st,stih4xx.txt') diff --git a/Documentation/devicetree/bindings/gpu/st,stih4xx.txt b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt index 2d150c311a05..8885d9e203fc 100644 --- a/Documentation/devicetree/bindings/gpu/st,stih4xx.txt +++ b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt @@ -69,6 +69,7 @@ STMicroelectronics stih4xx platforms - clock-names: names of the clocks listed in clocks property in the same order. - hdmi,hpd-gpio: gpio id to detect if an hdmi cable is plugged or not. + - ddc: phandle of an I2C controller used for DDC EDID probing sti-hda: Required properties: -- cgit v1.2.3-59-g8ed1b