From f567035a6187f1a5e7f86d4da4dbbca46cb68082 Mon Sep 17 00:00:00 2001 From: Kun Yi Date: Wed, 17 Oct 2018 15:27:09 -0700 Subject: dt-bindings: hwmon: Add adm127x documentation adm127x are hot-swap controllers that allow a circuit board to be removed from or inserted into a live backplane. This patch adds the device tree bindings documentation. Signed-off-by: Kun Yi Reviewed-by: Rob Herring Signed-off-by: Guenter Roeck --- .../devicetree/bindings/hwmon/adm1275.txt | 25 ++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/adm1275.txt (limited to 'Documentation/devicetree/bindings/hwmon') diff --git a/Documentation/devicetree/bindings/hwmon/adm1275.txt b/Documentation/devicetree/bindings/hwmon/adm1275.txt new file mode 100644 index 000000000000..1ecd03f3da4d --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adm1275.txt @@ -0,0 +1,25 @@ +adm1275 properties + +Required properties: +- compatible: Must be one of the supported compatible strings: + - "adi,adm1075" for adm1075 + - "adi,adm1272" for adm1272 + - "adi,adm1275" for adm1275 + - "adi,adm1276" for adm1276 + - "adi,adm1278" for adm1278 + - "adi,adm1293" for adm1293 + - "adi,adm1294" for adm1294 +- reg: I2C address + +Optional properties: + +- shunt-resistor-micro-ohms + Shunt resistor value in micro-Ohm + +Example: + +adm1272@10 { + compatible = "adi,adm1272"; + reg = <0x10>; + shunt-resistor-micro-ohms = <500>; +}; -- cgit v1.2.3-59-g8ed1b