From 3bbda1431b43f65736fa8aa7ccfa8a5d5c98b2b8 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 18 Nov 2018 18:30:56 +0100 Subject: dt-bindings: can: rcar_can: document r8a77990 support Document the support for rcar_can on R8A77990 SoC devices. Add R8A77990 to the list of SoCs which require the "assigned-clocks" and "assigned-clock-rates" properties. Signed-off-by: Marek Vasut Cc: Marc Kleine-Budde Reviewed-by: Simon Horman Reviewed-by: Rob Herring Signed-off-by: Geert Uytterhoeven --- Documentation/devicetree/bindings/net/can/rcar_can.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree/bindings/net/can/rcar_can.txt') diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt index e1f315ab2353..93ac849f42b0 100644 --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt @@ -17,6 +17,7 @@ Required properties: "renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC. "renesas,can-r8a7796" if CAN controller is a part of R8A7796 SoC. "renesas,can-r8a77965" if CAN controller is a part of R8A77965 SoC. + "renesas,can-r8a77990" if CAN controller is a part of R8A77990 SoC. "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device. "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1 compatible device. @@ -33,7 +34,8 @@ Required properties: - pinctrl-0: pin control group to be used for this controller. - pinctrl-names: must be "default". -Required properties for R8A774A1, R8A774C0, R8A7795, R8A7796 and R8A77965: +Required properties for R8A774A1, R8A774C0, R8A7795, R8A7796, R8A77965, +and R8A77990: For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can be used by both CAN and CAN FD controller at the same time. It needs to be scaled to maximum frequency if any of these controllers use it. This is done -- cgit v1.2.3-59-g8ed1b