From 78ca0b287314ad6b7b06161b3ff9b13e8a8bcce0 Mon Sep 17 00:00:00 2001 From: Richard Cochran Date: Mon, 29 Oct 2012 08:45:18 +0000 Subject: cpsw: add a DT field for the active time stamping port Because time stamping on both external ports of the switch simultaneously is positively useless from the application's point of view, this patch provides a DT configuration method to choose the active port. Signed-off-by: Richard Cochran Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/cpsw.txt | 3 +++ 1 file changed, 3 insertions(+) (limited to 'Documentation/devicetree/bindings/net/cpsw.txt') diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt index dba014fc5e7b..9f61f2b51681 100644 --- a/Documentation/devicetree/bindings/net/cpsw.txt +++ b/Documentation/devicetree/bindings/net/cpsw.txt @@ -23,6 +23,7 @@ Required properties: - mac_control : Specifies Default MAC control register content for the specific platform - slaves : Specifies number for slaves +- cpts_active_slave : Specifies the slave to use for time stamping - slave_reg_ofs : Specifies slave register offset - sliver_reg_ofs : Specifies slave sliver register offset - phy_id : Specifies slave phy id @@ -60,6 +61,7 @@ Examples: rx_descs = <64>; mac_control = <0x20>; slaves = <2>; + cpts_active_slave = <0>; cpsw_emac0: slave@0 { slave_reg_ofs = <0x200>; sliver_reg_ofs = <0xd80>; @@ -95,6 +97,7 @@ Examples: rx_descs = <64>; mac_control = <0x20>; slaves = <2>; + cpts_active_slave = <0>; cpsw_emac0: slave@0 { slave_reg_ofs = <0x200>; sliver_reg_ofs = <0xd80>; -- cgit v1.2.3-59-g8ed1b