From 762133d6a67fa027345fdc30737277465b4893dd Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 19 Oct 2021 14:43:12 +0200 Subject: dt-bindings: net: wireless: ti,wlcore: Convert to json-schema The Texas Instruments Wilink 6/7/8 (wl12xx/wl18xx) Wireless LAN Controllers can be connected via SPI or via SDIO. Convert the two Device Tree binding documents to json-schema, and merge them into a single document. Add missing ti,wl1285 compatible value. Add missing interrupt-names property. Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/23a2fbc46255a988e5d36f6c14abb7130480d200.1634646975.git.geert+renesas@glider.be Signed-off-by: Rob Herring --- .../devicetree/bindings/net/wireless/ti,wlcore.txt | 45 ---------------------- 1 file changed, 45 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt (limited to 'Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt') diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt deleted file mode 100644 index 9306c4dadd46..000000000000 --- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt +++ /dev/null @@ -1,45 +0,0 @@ -TI Wilink 6/7/8 (wl12xx/wl18xx) SDIO devices - -This node provides properties for controlling the wilink wireless device. The -node is expected to be specified as a child node to the SDIO controller that -connects the device to the system. - -Required properties: - - compatible: should be one of the following: - * "ti,wl1271" - * "ti,wl1273" - * "ti,wl1281" - * "ti,wl1283" - * "ti,wl1285" - * "ti,wl1801" - * "ti,wl1805" - * "ti,wl1807" - * "ti,wl1831" - * "ti,wl1835" - * "ti,wl1837" - - interrupts : specifies attributes for the out-of-band interrupt. - -Optional properties: - - ref-clock-frequency : ref clock frequency in Hz - - tcxo-clock-frequency : tcxo clock frequency in Hz - -Note: the *-clock-frequency properties assume internal clocks. In case of external -clock, new bindings (for parsing the clock nodes) have to be added. - -Example: - -&mmc3 { - vmmc-supply = <&wlan_en_reg>; - bus-width = <4>; - cap-power-off-card; - keep-power-in-suspend; - - #address-cells = <1>; - #size-cells = <0>; - wlcore: wlcore@2 { - compatible = "ti,wl1835"; - reg = <2>; - interrupt-parent = <&gpio0>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; - }; -}; -- cgit v1.2.3-59-g8ed1b