From f4e84a5d9db7dfea96832157bc461177e87a47dd Mon Sep 17 00:00:00 2001 From: Vidya Sagar Date: Tue, 13 Aug 2019 17:06:21 +0530 Subject: dt-bindings: PCI: designware: Add binding for CDM register check Add support to enable CDM (Configuration Dependent Module) registers check for any data corruption. CDM registers include standard PCIe configuration space registers, Port Logic registers and iATU and DMA registers. Refer Section S.4 of Synopsys DesignWare Cores PCI Express Controller Databook Version 4.90a. Signed-off-by: Vidya Sagar Signed-off-by: Lorenzo Pieralisi Reviewed-by: Thierry Reding Reviewed-by: Rob Herring --- Documentation/devicetree/bindings/pci/designware-pcie.txt | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'Documentation/devicetree/bindings/pci/designware-pcie.txt') diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt index 5561a1c060d0..3fba04da6a59 100644 --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt @@ -34,6 +34,11 @@ Optional properties: - clock-names: Must include the following entries: - "pcie" - "pcie_bus" +- snps,enable-cdm-check: This is a boolean property and if present enables + automatic checking of CDM (Configuration Dependent Module) registers + for data corruption. CDM registers include standard PCIe configuration + space registers, Port Logic registers, DMA and iATU (internal Address + Translation Unit) registers. RC mode: - num-viewport: number of view ports configured in hardware. If a platform does not specify it, the driver assumes 2. -- cgit v1.2.3-59-g8ed1b