From 78170811a2048de8e77a27a053be8b3eb3d4e556 Mon Sep 17 00:00:00 2001 From: Marco Felsch Date: Mon, 23 Jul 2018 09:47:46 +0200 Subject: regulator: pfuze100: add optional disable switch-regulators binding This binding is used to keep the backward compatibility with the current dtb's [1]. The binding informs the driver that the unused switch regulators can be disabled. If it is not specified, the driver doesn't disable the switch regulators. [1] https://patchwork.kernel.org/patch/10490381/ Signed-off-by: Marco Felsch Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/regulator/pfuze100.txt | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'Documentation/devicetree/bindings/regulator') diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt index 672c939045ff..c7610718adff 100644 --- a/Documentation/devicetree/bindings/regulator/pfuze100.txt +++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt @@ -4,6 +4,15 @@ Required properties: - compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000", "fsl,pfuze3001" - reg: I2C slave address +Optional properties: +- fsl,pfuze-support-disable-sw: Boolean, if present disable all unused switch + regulators to save power consumption. Attention, ensure that all important + regulators (e.g. DDR ref, DDR supply) has set the "regulator-always-on" + property. If not present, the switched regualtors are always on and can't be + disabled. This binding is a workaround to keep backward compatibility with + old dtb's which rely on the fact that the switched regulators are always on + and don't mark them explicit as "regulator-always-on". + Required child node: - regulators: This is the list of child nodes that specify the regulator initialization data for defined regulators. Please refer to below doc -- cgit v1.2.3-59-g8ed1b