From 5c4554d62b8c4e153bbb8a72660c87e21d33f86a Mon Sep 17 00:00:00 2001 From: Amelie Delaunay Date: Thu, 17 May 2018 14:04:25 +0200 Subject: dt-bindings: rtc: update stm32-rtc documentation for stm32mp1 rtc RTC embedded in stm32mp1 SoC is slightly different from stm32h7 one, it doesn't require to disable backup domain write protection, and rtc_ck parent clock assignment isn't allowed. To sum up, stm32mp1 RTC requires 2 clocks, pclk and rtc_ck, and an RTC alarm interrupt. Signed-off-by: Amelie Delaunay Reviewed-by: Rob Herring Signed-off-by: Alexandre Belloni --- .../devicetree/bindings/rtc/st,stm32-rtc.txt | 27 ++++++++++++++++------ 1 file changed, 20 insertions(+), 7 deletions(-) (limited to 'Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt') diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt index 00f8b5d27fbe..c920e2736991 100644 --- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt @@ -1,25 +1,29 @@ STM32 Real Time Clock Required properties: -- compatible: can be either "st,stm32-rtc" or "st,stm32h7-rtc", depending on - the device is compatible with stm32(f4/f7) or stm32h7. +- compatible: can be one of the following: + - "st,stm32-rtc" for devices compatible with stm32(f4/f7). + - "st,stm32h7-rtc" for devices compatible with stm32h7. + - "st,stm32mp1-rtc" for devices compatible with stm32mp1. - reg: address range of rtc register set. - clocks: can use up to two clocks, depending on part used: - "rtc_ck": RTC clock source. - It is required on stm32(f4/f7) and stm32h7. - "pclk": RTC APB interface clock. It is not present on stm32(f4/f7). - It is required on stm32h7. + It is required on stm32(h7/mp1). - clock-names: must be "rtc_ck" and "pclk". - It is required only on stm32h7. + It is required on stm32(h7/mp1). - interrupt-parent: phandle for the interrupt controller. -- interrupts: rtc alarm interrupt. + It is required on stm32(f4/f7/h7). +- interrupts: rtc alarm interrupt. On stm32mp1, a second interrupt is required + for rtc alarm wakeup interrupt. - st,syscfg: phandle/offset/mask triplet. The phandle to pwrcfg used to access control register at offset, and change the dbp (Disable Backup Protection) bit represented by the mask, mandatory to disable/enable backup domain (RTC registers) write protection. + It is required on stm32(f4/f7/h7). -Optional properties (to override default rtc_ck parent clock): +Optional properties (to override default rtc_ck parent clock on stm32(f4/f7/h7): - assigned-clocks: reference to the rtc_ck clock entry. - assigned-clock-parents: phandle of the new parent clock of rtc_ck. @@ -48,3 +52,12 @@ Example: interrupt-names = "alarm"; st,syscfg = <&pwrcfg 0x00 0x100>; }; + + rtc: rtc@5c004000 { + compatible = "st,stm32mp1-rtc"; + reg = <0x5c004000 0x400>; + clocks = <&rcc RTCAPB>, <&rcc RTC>; + clock-names = "pclk", "rtc_ck"; + interrupts-extended = <&intc GIC_SPI 3 IRQ_TYPE_NONE>, + <&exti 19 1>; + }; -- cgit v1.2.3-59-g8ed1b