From 52077d82331a13e3e09295ac288343b9f80d7d68 Mon Sep 17 00:00:00 2001 From: David Heidelberg Date: Mon, 27 Dec 2021 18:01:50 +0100 Subject: dt-bindings: spmi: convert QCOM PMIC SPMI bindings to yaml Convert Qualcomm PMIC SPMI binding to yaml format. Signed-off-by: David Heidelberg Reviewed-by: Vinod Koul Reviewed-by: Rob Herring Acked-by: Lee Jones Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20211227170151.73116-1-david@ixit.cz --- .../bindings/spmi/qcom,spmi-pmic-arb.txt | 65 ----------- .../bindings/spmi/qcom,spmi-pmic-arb.yaml | 120 +++++++++++++++++++++ 2 files changed, 120 insertions(+), 65 deletions(-) delete mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt create mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml (limited to 'Documentation/devicetree/bindings/spmi') diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt deleted file mode 100644 index ca645e21fe47..000000000000 --- a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt +++ /dev/null @@ -1,65 +0,0 @@ -Qualcomm SPMI Controller (PMIC Arbiter) - -The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI -controller with wrapping arbitration logic to allow for multiple on-chip -devices to control a single SPMI master. - -The PMIC Arbiter can also act as an interrupt controller, providing interrupts -to slave devices. - -See Documentation/devicetree/bindings/spmi/spmi.yaml for the generic SPMI -controller binding requirements for child nodes. - -See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for -generic interrupt controller binding documentation. - -Required properties: -- compatible : should be "qcom,spmi-pmic-arb". -- reg-names : must contain: - "core" - core registers - "intr" - interrupt controller registers - "cnfg" - configuration registers - Registers used only for V2 PMIC Arbiter: - "chnls" - tx-channel per virtual slave registers. - "obsrvr" - rx-channel (called observer) per virtual slave registers. - -- reg : address + size pairs describing the PMIC arb register sets; order must - correspond with the order of entries in reg-names -- #address-cells : must be set to 2 -- #size-cells : must be set to 0 -- qcom,ee : indicates the active Execution Environment identifier (0-5) -- qcom,channel : which of the PMIC Arb provided channels to use for accesses (0-5) -- interrupts : interrupt list for the PMIC Arb controller, must contain a - single interrupt entry for the peripheral interrupt -- interrupt-names : corresponding interrupt names for the interrupts - listed in the 'interrupts' property, must contain: - "periph_irq" - summary interrupt for PMIC peripherals -- interrupt-controller : boolean indicator that the PMIC arbiter is an interrupt controller -- #interrupt-cells : must be set to 4. Interrupts are specified as a 4-tuple: - cell 1: slave ID for the requested interrupt (0-15) - cell 2: peripheral ID for requested interrupt (0-255) - cell 3: the requested peripheral interrupt (0-7) - cell 4: interrupt flags indicating level-sense information, as defined in - dt-bindings/interrupt-controller/irq.h - -Example: - - spmi { - compatible = "qcom,spmi-pmic-arb"; - reg-names = "core", "intr", "cnfg"; - reg = <0xfc4cf000 0x1000>, - <0xfc4cb000 0x1000>, - <0xfc4ca000 0x1000>; - - interrupt-names = "periph_irq"; - interrupts = <0 190 0>; - - qcom,ee = <0>; - qcom,channel = <0>; - - #address-cells = <2>; - #size-cells = <0>; - - interrupt-controller; - #interrupt-cells = <4>; - }; diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml new file mode 100644 index 000000000000..55d379c85fd9 --- /dev/null +++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spmi/qcom,spmi-pmic-arb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SPMI Controller (PMIC Arbiter) + +maintainers: + - Stephen Boyd + +description: | + The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI + controller with wrapping arbitration logic to allow for multiple on-chip + devices to control a single SPMI master. + + The PMIC Arbiter can also act as an interrupt controller, providing interrupts + to slave devices. + +allOf: + - $ref: spmi.yaml + +properties: + compatible: + const: qcom,spmi-pmic-arb + + reg: + oneOf: + - items: # V1 + - description: core registers + - description: interrupt controller registers + - description: configuration registers + - items: # V2 + - description: core registers + - description: tx-channel per virtual slave regosters + - description: rx-channel (called observer) per virtual slave registers + - description: interrupt controller registers + - description: configuration registers + + reg-names: + oneOf: + - items: + - const: core + - const: intr + - const: cnfg + - items: + - const: core + - const: chnls + - const: obsrvr + - const: intr + - const: cnfg + + interrupts: + maxItems: 1 + + interrupt-names: + const: periph_irq + + interrupt-controller: true + + '#address-cells': true + + '#interrupt-cells': + const: 4 + description: | + cell 1: slave ID for the requested interrupt (0-15) + cell 2: peripheral ID for requested interrupt (0-255) + cell 3: the requested peripheral interrupt (0-7) + cell 4: interrupt flags indicating level-sense information, + as defined in dt-bindings/interrupt-controller/irq.h + + '#size-cells': true + + qcom,ee: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 5 + description: > + indicates the active Execution Environment identifier + + qcom,channel: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 5 + description: > + which of the PMIC Arb provided channels to use for accesses + +required: + - compatible + - reg-names + - interrupts + - interrupt-names + - '#interrupt-cells' + - qcom,ee + - qcom,channel + +unevaluatedProperties: false + +examples: + - | + spmi@fc4cf000 { + compatible = "qcom,spmi-pmic-arb"; + reg-names = "core", "intr", "cnfg"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + + interrupt-names = "periph_irq"; + interrupts = <0 190 0>; + + qcom,ee = <0>; + qcom,channel = <0>; + + #address-cells = <2>; + #size-cells = <0>; + + interrupt-controller; + #interrupt-cells = <4>; + }; + -- cgit v1.2.3-59-g8ed1b