From 23a71fd616bf77fcc630ea514c469b0dd09cb99c Mon Sep 17 00:00:00 2001 From: Scott Branden Date: Fri, 20 Mar 2015 18:06:22 -0700 Subject: dt-bindings: brcm: rationalize Broadcom documentation naming This patchset attempts to standardize the naming of dt-bindings documents based on the Broadcom vendor prefix of brcm. Although there are no guidelines currently present for how to name the dt-bindings document the "vendor,binding.txt" style is in use by some of the other vendors. Acked-by: Lee Jones Acked-by: Florian Fainelli Acked-by: Gregory Fong Acked-by: Stephen Warren Signed-off-by: Scott Branden Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/usb/brcm,bcm3384-usb.txt | 11 +++++++++++ 1 file changed, 11 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/brcm,bcm3384-usb.txt (limited to 'Documentation/devicetree/bindings/usb/brcm,bcm3384-usb.txt') diff --git a/Documentation/devicetree/bindings/usb/brcm,bcm3384-usb.txt b/Documentation/devicetree/bindings/usb/brcm,bcm3384-usb.txt new file mode 100644 index 000000000000..452c45c7bf29 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/brcm,bcm3384-usb.txt @@ -0,0 +1,11 @@ +* Broadcom USB controllers + +Required properties: +- compatible: "brcm,bcm3384-ohci", "brcm,bcm3384-ehci" + + These currently use the generic-ohci and generic-ehci drivers. On some + systems, special handling may be needed in the following cases: + + - Restoring state after systemwide power save modes + - Sharing PHYs with the USBD (UDC) hardware + - Figuring out which controllers are disabled on ASIC bondout variants -- cgit v1.2.3-59-g8ed1b