From 20107d7328cc2caea01587ba0571c61fb62efe41 Mon Sep 17 00:00:00 2001 From: Gabriel Fernandez Date: Mon, 2 Dec 2019 16:03:43 +0100 Subject: dt-bindings: rcc: Convert stm32mp1 rcc bindings to json-schema Convert the STM32MP1 RCC binding to DT schema format using json-schema. Signed-off-by: Gabriel Fernandez Signed-off-by: Rob Herring --- .../devicetree/bindings/clock/st,stm32mp1-rcc.txt | 60 ---------------- .../devicetree/bindings/clock/st,stm32mp1-rcc.yaml | 79 ++++++++++++++++++++++ 2 files changed, 79 insertions(+), 60 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt create mode 100644 Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml (limited to 'Documentation/devicetree/bindings') diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt deleted file mode 100644 index fb9495ea582c..000000000000 --- a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt +++ /dev/null @@ -1,60 +0,0 @@ -STMicroelectronics STM32 Peripheral Reset Clock Controller -========================================================== - -The RCC IP is both a reset and a clock controller. - -RCC makes also power management (resume/supend and wakeup interrupt). - -Please also refer to reset.txt for common reset controller binding usage. - -Please also refer to clock-bindings.txt for common clock controller -binding usage. - - -Required properties: -- compatible: "st,stm32mp1-rcc", "syscon" -- reg: should be register base and length as documented in the datasheet -- #clock-cells: 1, device nodes should specify the clock in their - "clocks" property, containing a phandle to the clock device node, - an index specifying the clock to use. -- #reset-cells: Shall be 1 -- interrupts: Should contain a general interrupt line and a interrupt line - to the wake-up of processor (CSTOP). - -Example: - rcc: rcc@50000000 { - compatible = "st,stm32mp1-rcc", "syscon"; - reg = <0x50000000 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - interrupts = , - ; - }; - -Specifying clocks -================= - -All available clocks are defined as preprocessor macros in -dt-bindings/clock/stm32mp1-clks.h header and can be used in device -tree sources. - -Specifying softreset control of devices -======================================= - -Device nodes should specify the reset channel required in their "resets" -property, containing a phandle to the reset device node and an index specifying -which channel to use. -The index is the bit number within the RCC registers bank, starting from RCC -base address. -It is calculated as: index = register_offset / 4 * 32 + bit_offset. -Where bit_offset is the bit offset within the register. - -For example on STM32MP1, for LTDC reset: - ltdc = APB4_RSTSETR_offset / 4 * 32 + LTDC_bit_offset - = 0x180 / 4 * 32 + 0 = 3072 - -The list of valid indices for STM32MP1 is available in: -include/dt-bindings/reset-controller/stm32mp1-resets.h - -This file implements defines like: -#define LTDC_R 3072 diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml new file mode 100644 index 000000000000..b8f91e444d2f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bindings/clock/st,stm32mp1-rcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Reset Clock Controller Binding + +maintainers: + - Gabriel Fernandez + +description: | + The RCC IP is both a reset and a clock controller. + RCC makes also power management (resume/supend and wakeup interrupt). + Please also refer to reset.txt for common reset controller binding usage. + + This binding uses common clock bindings + Documentation/devicetree/bindings/clock/clock-bindings.txt + + Specifying clocks + ================= + + All available clocks are defined as preprocessor macros in + dt-bindings/clock/stm32mp1-clks.h header and can be used in device + tree sources. + + Specifying softreset control of devices + ======================================= + + Device nodes should specify the reset channel required in their "resets" + property, containing a phandle to the reset device node and an index specifying + which channel to use. + The index is the bit number within the RCC registers bank, starting from RCC + base address. + It is calculated as: index = register_offset / 4 * 32 + bit_offset. + Where bit_offset is the bit offset within the register. + + For example on STM32MP1, for LTDC reset: + ltdc = APB4_RSTSETR_offset / 4 * 32 + LTDC_bit_offset + = 0x180 / 4 * 32 + 0 = 3072 + + The list of valid indices for STM32MP1 is available in: + include/dt-bindings/reset-controller/stm32mp1-resets.h + + This file implements defines like: + #define LTDC_R 3072 + +properties: + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + compatible: + items: + - const: st,stm32mp1-rcc + - const: syscon + + reg: + maxItems: 1 + +required: + - "#clock-cells" + - "#reset-cells" + - compatible + - reg + +additionalProperties: false + +examples: + - | + rcc: rcc@50000000 { + compatible = "st,stm32mp1-rcc", "syscon"; + reg = <0x50000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; +... -- cgit v1.2.3-59-g8ed1b