From a24626d72915fef2b38bb8467b3714f17efae6c0 Mon Sep 17 00:00:00 2001 From: Piotr Bugalski Date: Mon, 5 Nov 2018 11:36:25 +0100 Subject: dt-bindings: spi: QuadSPI driver for Atmel SAMA5D2 Atmel SAMA5D2 QuadSPI driver was moved from mtd to spi subsystem, this change is just moving DT-binding documentation. Suggested-by: Boris Brezillon Signed-off-by: Piotr Bugalski Reviewed-by: Rob Herring Signed-off-by: Mark Brown --- .../devicetree/bindings/mtd/atmel-quadspi.txt | 31 ---------------------- .../devicetree/bindings/spi/atmel-quadspi.txt | 31 ++++++++++++++++++++++ 2 files changed, 31 insertions(+), 31 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mtd/atmel-quadspi.txt create mode 100644 Documentation/devicetree/bindings/spi/atmel-quadspi.txt (limited to 'Documentation/devicetree/bindings') diff --git a/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt deleted file mode 100644 index b93c1e2f25dd..000000000000 --- a/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt +++ /dev/null @@ -1,31 +0,0 @@ -* Atmel Quad Serial Peripheral Interface (QSPI) - -Required properties: -- compatible: Should be "atmel,sama5d2-qspi". -- reg: Should contain the locations and lengths of the base registers - and the mapped memory. -- reg-names: Should contain the resource reg names: - - qspi_base: configuration register address space - - qspi_mmap: memory mapped address space -- interrupts: Should contain the interrupt for the device. -- clocks: The phandle of the clock needed by the QSPI controller. -- #address-cells: Should be <1>. -- #size-cells: Should be <0>. - -Example: - -spi@f0020000 { - compatible = "atmel,sama5d2-qspi"; - reg = <0xf0020000 0x100>, <0xd0000000 0x8000000>; - reg-names = "qspi_base", "qspi_mmap"; - interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&spi0_clk>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi0_default>; - - m25p80@0 { - ... - }; -}; diff --git a/Documentation/devicetree/bindings/spi/atmel-quadspi.txt b/Documentation/devicetree/bindings/spi/atmel-quadspi.txt new file mode 100644 index 000000000000..b93c1e2f25dd --- /dev/null +++ b/Documentation/devicetree/bindings/spi/atmel-quadspi.txt @@ -0,0 +1,31 @@ +* Atmel Quad Serial Peripheral Interface (QSPI) + +Required properties: +- compatible: Should be "atmel,sama5d2-qspi". +- reg: Should contain the locations and lengths of the base registers + and the mapped memory. +- reg-names: Should contain the resource reg names: + - qspi_base: configuration register address space + - qspi_mmap: memory mapped address space +- interrupts: Should contain the interrupt for the device. +- clocks: The phandle of the clock needed by the QSPI controller. +- #address-cells: Should be <1>. +- #size-cells: Should be <0>. + +Example: + +spi@f0020000 { + compatible = "atmel,sama5d2-qspi"; + reg = <0xf0020000 0x100>, <0xd0000000 0x8000000>; + reg-names = "qspi_base", "qspi_mmap"; + interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&spi0_clk>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0_default>; + + m25p80@0 { + ... + }; +}; -- cgit v1.2.3-59-g8ed1b