From c784e46c8445635afd81bd4089fc5e87271a8f3b Mon Sep 17 00:00:00 2001 From: Ralf Schlatterbeck Date: Wed, 19 May 2021 13:54:51 +0200 Subject: auxdisplay: Add I2C gpio expander example The hd44780 displays are often used with pcf8574 based I/O expanders. Add example to documentation. Suggested-by: Geert Uytterhoeven Signed-off-by: Ralf Schlatterbeck [Added Suggested-by tag] Signed-off-by: Miguel Ojeda --- .../bindings/auxdisplay/hit,hd44780.yaml | 31 +++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml index 9222b06e93a0..fde07e4b119d 100644 --- a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml +++ b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml @@ -12,7 +12,10 @@ maintainers: description: The Hitachi HD44780 Character LCD Controller is commonly used on character LCDs that can display one or more lines of text. It exposes an M6800 bus - interface, which can be used in either 4-bit or 8-bit mode. + interface, which can be used in either 4-bit or 8-bit mode. By using a + GPIO expander it is possible to use the driver with one of the popular I2C + expander boards based on the PCF8574 available for these displays. For + an example see below. properties: compatible: @@ -94,3 +97,29 @@ examples: display-height-chars = <2>; display-width-chars = <16>; }; + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pcf8574: pcf8574@27 { + compatible = "nxp,pcf8574"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + hd44780 { + compatible = "hit,hd44780"; + display-height-chars = <2>; + display-width-chars = <16>; + data-gpios = <&pcf8574 4 0>, + <&pcf8574 5 0>, + <&pcf8574 6 0>, + <&pcf8574 7 0>; + enable-gpios = <&pcf8574 2 0>; + rs-gpios = <&pcf8574 0 0>; + rw-gpios = <&pcf8574 1 0>; + backlight-gpios = <&pcf8574 3 0>; + }; -- cgit v1.3-18-gd494 From da5e96ffd5a938b11c430d023109a19ba3b6d71d Mon Sep 17 00:00:00 2001 From: satya priya Date: Fri, 23 Jul 2021 12:12:37 -0700 Subject: dt-bindings: power: reset: Change 'additionalProperties' to true Change 'additionalProperties' to true as this is a generic binding. Signed-off-by: satya priya Acked-by: Rob Herring Reviewed-by: Sebastian Reichel Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1620800053-26405-4-git-send-email-skakit@codeaurora.org Signed-off-by: Dmitry Torokhov --- Documentation/devicetree/bindings/power/reset/reboot-mode.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml index 9c6fda6b1dd9..ad0a0b95cec1 100644 --- a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml +++ b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml @@ -36,7 +36,7 @@ patternProperties: "^mode-.*$": $ref: /schemas/types.yaml#/definitions/uint32 -additionalProperties: false +additionalProperties: true examples: - | -- cgit v1.3-18-gd494 From 400793bc351b83c11ce28210d86039e905c8ff32 Mon Sep 17 00:00:00 2001 From: satya priya Date: Fri, 23 Jul 2021 12:12:52 -0700 Subject: dt-bindings: input: pm8941-pwrkey: Convert pm8941 power key binding to yaml Convert qcom pm8941 power key binding from .txt to .yaml format. The example has been removed in favour of full example being available in the qcom,pon.yaml binding. Signed-off-by: satya priya Reviewed-by: Rob Herring Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1620800053-26405-5-git-send-email-skakit@codeaurora.org Signed-off-by: Dmitry Torokhov --- .../bindings/input/qcom,pm8941-pwrkey.txt | 55 ---------------------- .../bindings/input/qcom,pm8941-pwrkey.yaml | 51 ++++++++++++++++++++ 2 files changed, 51 insertions(+), 55 deletions(-) delete mode 100644 Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt create mode 100644 Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt deleted file mode 100644 index 6cd08bca2c66..000000000000 --- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt +++ /dev/null @@ -1,55 +0,0 @@ -Qualcomm PM8941 PMIC Power Key - -PROPERTIES - -- compatible: - Usage: required - Value type: - Definition: must be one of: - "qcom,pm8941-pwrkey" - "qcom,pm8941-resin" - "qcom,pmk8350-pwrkey" - "qcom,pmk8350-resin" - -- reg: - Usage: required - Value type: - Definition: base address of registers for block - -- interrupts: - Usage: required - Value type: - Definition: key change interrupt; The format of the specifier is - defined by the binding document describing the node's - interrupt parent. - -- debounce: - Usage: optional - Value type: - Definition: time in microseconds that key must be pressed or released - for state change interrupt to trigger. - -- bias-pull-up: - Usage: optional - Value type: - Definition: presence of this property indicates that the KPDPWR_N pin - should be configured for pull up. - -- linux,code: - Usage: optional - Value type: - Definition: The input key-code associated with the power key. - Use the linux event codes defined in - include/dt-bindings/input/linux-event-codes.h - When property is omitted KEY_POWER is assumed. - -EXAMPLE - - pwrkey@800 { - compatible = "qcom,pm8941-pwrkey"; - reg = <0x800>; - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = ; - }; diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml new file mode 100644 index 000000000000..62314a5fdce5 --- /dev/null +++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/qcom,pm8941-pwrkey.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PM8941 PMIC Power Key + +maintainers: + - Courtney Cavin + - Vinod Koul + +allOf: + - $ref: input.yaml# + +properties: + compatible: + enum: + - qcom,pm8941-pwrkey + - qcom,pm8941-resin + - qcom,pmk8350-pwrkey + - qcom,pmk8350-resin + + interrupts: + maxItems: 1 + + debounce: + description: | + Time in microseconds that key must be pressed or + released for state change interrupt to trigger. + $ref: /schemas/types.yaml#/definitions/uint32 + + bias-pull-up: + description: | + Presence of this property indicates that the KPDPWR_N + pin should be configured for pull up. + $ref: /schemas/types.yaml#/definitions/flag + + linux,code: + description: | + The input key-code associated with the power key. + Use the linux event codes defined in + include/dt-bindings/input/linux-event-codes.h + When property is omitted KEY_POWER is assumed. + +required: + - compatible + - interrupts + +unevaluatedProperties: false +... -- cgit v1.3-18-gd494 From 76ba1900cb67390d963e07457ebf679c56c59094 Mon Sep 17 00:00:00 2001 From: satya priya Date: Fri, 23 Jul 2021 12:13:03 -0700 Subject: dt-bindings: power: reset: qcom-pon: Convert qcom PON binding to yaml Convert qcom PON binding from .txt to .yaml format. Signed-off-by: satya priya Reviewed-by: Rob Herring Reviewed-by: Sebastian Reichel Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1620800053-26405-6-git-send-email-skakit@codeaurora.org Signed-off-by: Dmitry Torokhov --- .../devicetree/bindings/power/reset/qcom,pon.txt | 49 ------------- .../devicetree/bindings/power/reset/qcom,pon.yaml | 80 ++++++++++++++++++++++ 2 files changed, 80 insertions(+), 49 deletions(-) delete mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.txt create mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt deleted file mode 100644 index 0c0dc3a1e693..000000000000 --- a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt +++ /dev/null @@ -1,49 +0,0 @@ -Qualcomm PON Device - -The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey -and resin along with the Android reboot-mode. - -This DT node has pwrkey and resin as sub nodes. - -Required Properties: --compatible: Must be one of: - "qcom,pm8916-pon" - "qcom,pms405-pon" - "qcom,pm8998-pon" - --reg: Specifies the physical address of the pon register - -Optional subnode: --pwrkey: Specifies the subnode pwrkey and should follow the - qcom,pm8941-pwrkey.txt description. --resin: Specifies the subnode resin and should follow the - qcom,pm8xxx-pwrkey.txt description. - -The rest of the properties should follow the generic reboot-mode description -found in reboot-mode.txt - -Example: - - pon@800 { - compatible = "qcom,pm8916-pon"; - - reg = <0x800>; - mode-bootloader = <0x2>; - mode-recovery = <0x1>; - - pwrkey { - compatible = "qcom,pm8941-pwrkey"; - interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = ; - }; - - resin { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = ; - }; - }; diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml new file mode 100644 index 000000000000..353f155df0f4 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/qcom,pon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PON Device + +maintainers: + - Vinod Koul + +description: | + The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey + and resin along with the Android reboot-mode. + + This DT node has pwrkey and resin as sub nodes. + +allOf: + - $ref: reboot-mode.yaml# + +properties: + compatible: + enum: + - qcom,pm8916-pon + - qcom,pms405-pon + - qcom,pm8998-pon + + reg: + maxItems: 1 + + pwrkey: + type: object + $ref: "../../input/qcom,pm8941-pwrkey.yaml#" + + resin: + type: object + $ref: "../../input/qcom,pm8941-pwrkey.yaml#" + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + spmi_bus: spmi@c440000 { + reg = <0x0c440000 0x1100>; + #address-cells = <2>; + #size-cells = <0>; + pmk8350: pmic@0 { + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + pmk8350_pon: pon_hlos@1300 { + reg = <0x1300>; + compatible = "qcom,pm8998-pon"; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = < 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH >; + debounce = <15625>; + bias-pull-up; + linux,code = ; + }; + + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = ; + }; + }; + }; + }; +... -- cgit v1.3-18-gd494 From 04647773d6481885447dc263673144053d3ec561 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 23 Jul 2021 17:34:07 -0700 Subject: dt-bindings: input: Convert ChipOne ICN8318 binding to a schema The ChipOne ICN8318 Touchscreen Controller is supported by Linux thanks to its device tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that driver over to a YAML schema. Signed-off-by: Maxime Ripard Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20210721140424.725744-17-maxime@cerno.tech Signed-off-by: Dmitry Torokhov --- .../input/touchscreen/chipone,icn8318.yaml | 62 ++++++++++++++++++++++ .../bindings/input/touchscreen/chipone_icn8318.txt | 44 --------------- 2 files changed, 62 insertions(+), 44 deletions(-) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml b/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml new file mode 100644 index 000000000000..9df685bdc5db --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/chipone,icn8318.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ChipOne ICN8318 Touchscreen Controller Device Tree Bindings + +maintainers: + - Dmitry Torokhov + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + const: chipone,icn8318 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + wake-gpios: + maxItems: 1 + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - wake-gpios + - touchscreen-size-x + - touchscreen-size-y + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@40 { + compatible = "chipone,icn8318"; + reg = <0x40>; + interrupt-parent = <&pio>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */ + pinctrl-names = "default"; + pinctrl-0 = <&ts_wake_pin_p66>; + wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt b/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt deleted file mode 100644 index 38b0603f65f3..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt +++ /dev/null @@ -1,44 +0,0 @@ -* ChipOne icn8318 I2C touchscreen controller - -Required properties: - - compatible : "chipone,icn8318" - - reg : I2C slave address of the chip (0x40) - - interrupts : interrupt specification for the icn8318 interrupt - - wake-gpios : GPIO specification for the WAKE input - - touchscreen-size-x : horizontal resolution of touchscreen (in pixels) - - touchscreen-size-y : vertical resolution of touchscreen (in pixels) - -Optional properties: - - pinctrl-names : should be "default" - - pinctrl-0: : a phandle pointing to the pin settings for the - control gpios - - touchscreen-fuzz-x : horizontal noise value of the absolute input - device (in pixels) - - touchscreen-fuzz-y : vertical noise value of the absolute input - device (in pixels) - - touchscreen-inverted-x : X axis is inverted (boolean) - - touchscreen-inverted-y : Y axis is inverted (boolean) - - touchscreen-swapped-x-y : X and Y axis are swapped (boolean) - Swapping is done after inverting the axis - -Example: - -i2c@00000000 { - /* ... */ - - chipone_icn8318@40 { - compatible = "chipone,icn8318"; - reg = <0x40>; - interrupt-parent = <&pio>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */ - pinctrl-names = "default"; - pinctrl-0 = <&ts_wake_pin_p66>; - wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ - touchscreen-size-x = <800>; - touchscreen-size-y = <480>; - touchscreen-inverted-x; - touchscreen-swapped-x-y; - }; - - /* ... */ -}; -- cgit v1.3-18-gd494 From 187acd8c148a5f6ffed70776ca7f02efca0342fb Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 23 Jul 2021 17:34:20 -0700 Subject: dt-bindings: input: Convert Pixcir Touchscreen binding to a schema The Pixcir Touchscreen Controller is supported by Linux thanks to its device tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that driver over to a YAML schema. Signed-off-by: Maxime Ripard Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20210721140424.725744-18-maxime@cerno.tech Signed-off-by: Dmitry Torokhov --- .../input/touchscreen/pixcir,pixcir_ts.yaml | 68 ++++++++++++++++++++++ .../bindings/input/touchscreen/pixcir_i2c_ts.txt | 31 ---------- 2 files changed, 68 insertions(+), 31 deletions(-) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/pixcir,pixcir_ts.yaml delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir,pixcir_ts.yaml b/Documentation/devicetree/bindings/input/touchscreen/pixcir,pixcir_ts.yaml new file mode 100644 index 000000000000..f9998edbff70 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/pixcir,pixcir_ts.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/pixcir,pixcir_ts.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Pixcir Touchscreen Controller Device Tree Bindings + +maintainers: + - Dmitry Torokhov + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - pixcir,pixcir_ts + - pixcir,pixcir_tangoc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + attb-gpio: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + enable-gpios: + maxItems: 1 + + wake-gpios: + maxItems: 1 + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - attb-gpio + - touchscreen-size-x + - touchscreen-size-y + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@5c { + compatible = "pixcir,pixcir_ts"; + reg = <0x5c>; + interrupts = <2 0>; + attb-gpio = <&gpf 2 0 2>; + touchscreen-size-x = <800>; + touchscreen-size-y = <600>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt deleted file mode 100644 index 697a3e7831e7..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt +++ /dev/null @@ -1,31 +0,0 @@ -* Pixcir I2C touchscreen controllers - -Required properties: -- compatible: must be "pixcir,pixcir_ts" or "pixcir,pixcir_tangoc" -- reg: I2C address of the chip -- interrupts: interrupt to which the chip is connected -- attb-gpio: GPIO connected to the ATTB line of the chip -- touchscreen-size-x: horizontal resolution of touchscreen (in pixels) -- touchscreen-size-y: vertical resolution of touchscreen (in pixels) - -Optional properties: -- reset-gpios: GPIO connected to the RESET line of the chip -- enable-gpios: GPIO connected to the ENABLE line of the chip -- wake-gpios: GPIO connected to the WAKE line of the chip - -Example: - - i2c@00000000 { - /* ... */ - - pixcir_ts@5c { - compatible = "pixcir,pixcir_ts"; - reg = <0x5c>; - interrupts = <2 0>; - attb-gpio = <&gpf 2 0 2>; - touchscreen-size-x = <800>; - touchscreen-size-y = <600>; - }; - - /* ... */ - }; -- cgit v1.3-18-gd494 From cc3d15a51717b8f5850444aa437bf5535e80d263 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 23 Jul 2021 17:34:36 -0700 Subject: dt-bindings: input: Convert Regulator Haptic binding to a schema The Haptic feedback based on a regulator is supported by Linux thanks to its device tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that driver over to a YAML schema. Signed-off-by: Maxime Ripard Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20210721140424.725744-19-maxime@cerno.tech Signed-off-by: Dmitry Torokhov --- .../devicetree/bindings/input/regulator-haptic.txt | 21 ----------- .../bindings/input/regulator-haptic.yaml | 43 ++++++++++++++++++++++ 2 files changed, 43 insertions(+), 21 deletions(-) delete mode 100644 Documentation/devicetree/bindings/input/regulator-haptic.txt create mode 100644 Documentation/devicetree/bindings/input/regulator-haptic.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/input/regulator-haptic.txt b/Documentation/devicetree/bindings/input/regulator-haptic.txt deleted file mode 100644 index 3ed1c7eb2f97..000000000000 --- a/Documentation/devicetree/bindings/input/regulator-haptic.txt +++ /dev/null @@ -1,21 +0,0 @@ -* Regulator Haptic Device Tree Bindings - -Required Properties: - - compatible : Should be "regulator-haptic" - - haptic-supply : Power supply to the haptic motor. - [*] refer Documentation/devicetree/bindings/regulator/regulator.txt - - - max-microvolt : The maximum voltage value supplied to the haptic motor. - [The unit of the voltage is a micro] - - - min-microvolt : The minimum voltage value supplied to the haptic motor. - [The unit of the voltage is a micro] - -Example: - - haptics { - compatible = "regulator-haptic"; - haptic-supply = <&motor_regulator>; - max-microvolt = <2700000>; - min-microvolt = <1100000>; - }; diff --git a/Documentation/devicetree/bindings/input/regulator-haptic.yaml b/Documentation/devicetree/bindings/input/regulator-haptic.yaml new file mode 100644 index 000000000000..b1ae72f9cd2d --- /dev/null +++ b/Documentation/devicetree/bindings/input/regulator-haptic.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/input/regulator-haptic.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Regulator Haptic Device Tree Bindings + +maintainers: + - Jaewon Kim + +properties: + compatible: + const: regulator-haptic + + haptic-supply: + description: > + Power supply to the haptic motor + + max-microvolt: + description: > + The maximum voltage value supplied to the haptic motor + + min-microvolt: + description: > + The minimum voltage value supplied to the haptic motor + +required: + - compatible + - haptic-supply + - max-microvolt + - min-microvolt + +additionalProperties: false + +examples: + - | + haptics { + compatible = "regulator-haptic"; + haptic-supply = <&motor_regulator>; + max-microvolt = <2700000>; + min-microvolt = <1100000>; + }; -- cgit v1.3-18-gd494 From a5b84e4e4f57cceceb206fd8b1c828c81b7e63a6 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 23 Jul 2021 17:34:57 -0700 Subject: dt-bindings: input: sun4i-lradc: Add wakeup-source The LRADC can be a wakeup source and is listed as such in some DT already. Let's make sure we allow that property in the binding. Signed-off-by: Maxime Ripard Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20210721140424.725744-21-maxime@cerno.tech Signed-off-by: Dmitry Torokhov --- .../devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml index cffd02028d02..d74f2002409e 100644 --- a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml +++ b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml @@ -29,6 +29,8 @@ properties: description: Regulator for the LRADC reference voltage + wakeup-source: true + patternProperties: "^button-[0-9]+$": type: object -- cgit v1.3-18-gd494 From 4aece33cacf726d34ecd8824aee369652ec2beec Mon Sep 17 00:00:00 2001 From: Olivier Dautricourt Date: Thu, 17 Jun 2021 21:52:32 +0200 Subject: dt-bindings: dma: altera-msgdma: make response port optional Response port is not required in some configuration of the IP core. Signed-off-by: Olivier Dautricourt Reviewed-by: Rob Herring Reviewed-by: Stefan Roese Link: https://lore.kernel.org/r/fb28146a23a182be9e5435c1d3e5cac36b372294.1623898678.git.olivier.dautricourt@orolia.com Signed-off-by: Vinod Koul --- Documentation/devicetree/bindings/dma/altr,msgdma.yaml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/dma/altr,msgdma.yaml b/Documentation/devicetree/bindings/dma/altr,msgdma.yaml index a4f9fe23dcd9..b193ee2db4a7 100644 --- a/Documentation/devicetree/bindings/dma/altr,msgdma.yaml +++ b/Documentation/devicetree/bindings/dma/altr,msgdma.yaml @@ -24,13 +24,15 @@ properties: items: - description: Control and Status Register Slave Port - description: Descriptor Slave Port - - description: Response Slave Port + - description: Response Slave Port (Optional) + minItems: 2 reg-names: items: - const: csr - const: desc - const: resp + minItems: 2 interrupts: maxItems: 1 -- cgit v1.3-18-gd494 From ef94b0413bf4e0d328989fecf5b773e82c8794ac Mon Sep 17 00:00:00 2001 From: Amelie Delaunay Date: Thu, 24 Jun 2021 11:39:58 +0200 Subject: dt-bindings: dma: add alternative REQ/ACK protocol selection in stm32-dma Default REQ/ACK protocol consists in maintaining ACK signal up to the removal of REQuest and the transfer completion. In case of alternative REQ/ACK protocol, ACK de-assertion does not wait the removal of the REQuest, but only the transfer completion. Due to a possible DMA stream lock when transferring data to/from STM32 USART/UART, this new bindings allow to select this alternative protocol in device tree, especially for STM32 USART/UART nodes. Signed-off-by: Amelie Delaunay Acked-by: Rob Herring Link: https://lore.kernel.org/r/20210624093959.142265-2-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul --- Documentation/devicetree/bindings/dma/st,stm32-dma.yaml | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml index 2a5325f480f6..4bf676fd25dc 100644 --- a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml +++ b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml @@ -40,6 +40,13 @@ description: | 0x0: FIFO mode with threshold selectable with bit 0-1 0x1: Direct mode: each DMA request immediately initiates a transfer from/to the memory, FIFO is bypassed. + -bit 4: alternative DMA request/acknowledge protocol + 0x0: Use standard DMA ACK management, where ACK signal is maintained + up to the removal of request and transfer completion + 0x1: Use alternative DMA ACK management, where ACK de-assertion does + not wait for the de-assertion of the REQuest, ACK is only managed + by transfer completion. This must only be used on channels + managing transfers for STM32 USART/UART. maintainers: -- cgit v1.3-18-gd494 From 4d79e367185dc8e3f83525a38b77e36fac69a85e Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 25 Jun 2021 12:48:22 +0200 Subject: dt-bindings: pci: xilinx-nwl: Document optional clock property Clock property hasn't been documented in binding document but it is used for quite a long time where clock was specified by commit 9c8a47b484ed ("arm64: dts: xilinx: Add the clock nodes for zynqmp"). Link: https://lore.kernel.org/r/67aa2c189337181bb2d7721fb616db5640587d2a.1624618100.git.michal.simek@xilinx.com Signed-off-by: Michal Simek Signed-off-by: Lorenzo Pieralisi Acked-by: Rob Herring --- Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt index 2d677e90a7e2..f56f8c58c5d9 100644 --- a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt +++ b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt @@ -35,6 +35,7 @@ Required properties: Optional properties: - dma-coherent: present if DMA operations are coherent +- clocks: Input clock specifier. Refer to common clock bindings Example: ++++++++ -- cgit v1.3-18-gd494 From 22fc857538c3a256563bb796f978b6d4693f5aa3 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 21 Jul 2021 16:04:03 +0200 Subject: dt-bindings: thermal: Make trips node optional Even though the previous binding made it a required child node, the implementation in Linux never made it mandatory and just ignored thermal zones without trip points. This was even effectively encouraged, since the thermal core wouldn't allow a thermal sensor to probe without a thermal zone. In the case where you had a thermal device that had multiple sensors but with enough knowledge to provide trip points for only a few of them, this meant that the only way to make that driver probe was to provide a thermal zone without the trips node required by the binding. This obviously led to a fair number of device trees doing exactly that, making the initial binding requirement ineffective. Let's make it clear by dropping that requirement. Cc: Amit Kucheria Cc: Daniel Lezcano Cc: linux-pm@vger.kernel.org Cc: Zhang Rui Signed-off-by: Maxime Ripard Reviewed-by: Rob Herring Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20210721140424.725744-34-maxime@cerno.tech --- Documentation/devicetree/bindings/thermal/thermal-zones.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml index 164f71598c59..a07de5ed0ca6 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml @@ -215,7 +215,7 @@ patternProperties: - polling-delay - polling-delay-passive - thermal-sensors - - trips + additionalProperties: false additionalProperties: false -- cgit v1.3-18-gd494 From 8158da6a33f2656c2a98c30eb9185a44e215a6b6 Mon Sep 17 00:00:00 2001 From: Mathew McBride Date: Fri, 9 Jul 2021 04:45:18 +0000 Subject: dt-bindings: rtc: add Epson RX-8025 and RX-8035 These are supported by the rtc-rx8025 module. RX-8025 also has support in ds1307 due to compatible time registers. Signed-off-by: Mathew McBride Reviewed-by: Nobuhiro Iwamatsu Acked-by: Rob Herring Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210709044518.28769-3-matt@traverse.com.au --- Documentation/devicetree/bindings/rtc/trivial-rtc.yaml | 3 +++ 1 file changed, 3 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml index 7548d8714871..13925bb78ec7 100644 --- a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml @@ -32,6 +32,9 @@ properties: - dallas,ds3232 # I2C-BUS INTERFACE REAL TIME CLOCK MODULE - epson,rx8010 + # I2C-BUS INTERFACE REAL TIME CLOCK MODULE + - epson,rx8025 + - epson,rx8035 # I2C-BUS INTERFACE REAL TIME CLOCK MODULE with Battery Backed RAM - epson,rx8571 # I2C-BUS INTERFACE REAL TIME CLOCK MODULE -- cgit v1.3-18-gd494 From 0284b52e85341e3cd4b70c8b2423fd23b8a003a8 Mon Sep 17 00:00:00 2001 From: Thara Gopinath Date: Mon, 9 Aug 2021 15:16:05 -0400 Subject: dt-bindings: thermal: Add dt binding for QCOM LMh Add dt binding documentation to describe Qualcomm Limits Management Hardware node. Signed-off-by: Thara Gopinath Reviewed-by: Rob Herring Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20210809191605.3742979-8-thara.gopinath@linaro.org --- .../devicetree/bindings/thermal/qcom-lmh.yaml | 82 ++++++++++++++++++++++ 1 file changed, 82 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/qcom-lmh.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml new file mode 100644 index 000000000000..289e9a845600 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2021 Linaro Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/qcom-lmh.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Limits Management Hardware(LMh) + +maintainers: + - Thara Gopinath + +description: + Limits Management Hardware(LMh) is a hardware infrastructure on some + Qualcomm SoCs that can enforce temperature and current limits as + programmed by software for certain IPs like CPU. + +properties: + compatible: + enum: + - qcom,sdm845-lmh + + reg: + items: + - description: core registers + + interrupts: + maxItems: 1 + + '#interrupt-cells': + const: 1 + + interrupt-controller: true + + cpus: + description: + phandle of the first cpu in the LMh cluster + $ref: /schemas/types.yaml#/definitions/phandle + + qcom,lmh-temp-arm-millicelsius: + description: + An integer expressing temperature threshold at which the LMh thermal + FSM is engaged. + + qcom,lmh-temp-low-millicelsius: + description: + An integer expressing temperature threshold at which the state machine + will attempt to remove frequency throttling. + + qcom,lmh-temp-high-millicelsius: + description: + An integer expressing temperature threshold at which the state machine + will attempt to throttle the frequency. + +required: + - compatible + - reg + - interrupts + - '#interrupt-cells' + - interrupt-controller + - cpus + - qcom,lmh-temp-arm-millicelsius + - qcom,lmh-temp-low-millicelsius + - qcom,lmh-temp-high-millicelsius + +additionalProperties: false + +examples: + - | + #include + + lmh@17d70800 { + compatible = "qcom,sdm845-lmh"; + reg = <0x17d70800 0x400>; + interrupts = ; + cpus = <&CPU4>; + qcom,lmh-temp-arm-millicelsius = <65000>; + qcom,lmh-temp-low-millicelsius = <94500>; + qcom,lmh-temp-high-millicelsius = <95000>; + interrupt-controller; + #interrupt-cells = <1>; + }; -- cgit v1.3-18-gd494 From f00bfc6489952528947cba05af158a4badf41688 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 19 Aug 2021 18:03:36 +0530 Subject: dt-bindings: PCI: pci-ep: Add binding to specify virtual function Add binding to specify virtual function (associated with each physical function) in endpoint mode. Link: https://lore.kernel.org/r/20210819123343.1951-2-kishon@ti.com Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Lorenzo Pieralisi Reviewed-by: Rob Herring --- Documentation/devicetree/bindings/pci/pci-ep.yaml | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/pci/pci-ep.yaml b/Documentation/devicetree/bindings/pci/pci-ep.yaml index 7847bbcd4a03..ccec51ab5247 100644 --- a/Documentation/devicetree/bindings/pci/pci-ep.yaml +++ b/Documentation/devicetree/bindings/pci/pci-ep.yaml @@ -23,6 +23,13 @@ properties: default: 1 maximum: 255 + max-virtual-functions: + description: Array representing the number of virtual functions corresponding to each physical + function + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 1 + maxItems: 255 + max-link-speed: $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 1, 2, 3, 4 ] -- cgit v1.3-18-gd494 From 33d2f8e4ffd144a0b0c9968558820af0164a2d53 Mon Sep 17 00:00:00 2001 From: Srikanth Thokala Date: Fri, 6 Aug 2021 02:40:09 +0530 Subject: dt-bindings: PCI: Add Intel Keem Bay PCIe controller Document DT bindings for PCIe controller found on Intel Keem Bay SoC. Link: https://lore.kernel.org/r/20210805211010.29484-2-srikanth.thokala@intel.com Signed-off-by: Wan Ahmad Zainie Signed-off-by: Srikanth Thokala Signed-off-by: Lorenzo Pieralisi Reviewed-by: Rob Herring --- .../bindings/pci/intel,keembay-pcie-ep.yaml | 69 +++++++++++++++ .../bindings/pci/intel,keembay-pcie.yaml | 97 ++++++++++++++++++++++ 2 files changed, 166 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml create mode 100644 Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml new file mode 100644 index 000000000000..e87ff27526ff --- /dev/null +++ b/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/pci/intel,keembay-pcie-ep.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Intel Keem Bay PCIe controller Endpoint mode + +maintainers: + - Wan Ahmad Zainie + - Srikanth Thokala + +properties: + compatible: + const: intel,keembay-pcie-ep + + reg: + maxItems: 5 + + reg-names: + items: + - const: dbi + - const: dbi2 + - const: atu + - const: addr_space + - const: apb + + interrupts: + maxItems: 4 + + interrupt-names: + items: + - const: pcie + - const: pcie_ev + - const: pcie_err + - const: pcie_mem_access + + num-lanes: + description: Number of lanes to use. + enum: [ 1, 2 ] + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + #include + #include + pcie-ep@37000000 { + compatible = "intel,keembay-pcie-ep"; + reg = <0x37000000 0x00001000>, + <0x37100000 0x00001000>, + <0x37300000 0x00001000>, + <0x36000000 0x01000000>, + <0x37800000 0x00000200>; + reg-names = "dbi", "dbi2", "atu", "addr_space", "apb"; + interrupts = , + , + , + ; + interrupt-names = "pcie", "pcie_ev", "pcie_err", "pcie_mem_access"; + num-lanes = <2>; + }; diff --git a/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml b/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml new file mode 100644 index 000000000000..ed4400c9ac09 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/pci/intel,keembay-pcie.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Intel Keem Bay PCIe controller Root Complex mode + +maintainers: + - Wan Ahmad Zainie + - Srikanth Thokala + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + const: intel,keembay-pcie + + ranges: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + reg: + maxItems: 4 + + reg-names: + items: + - const: dbi + - const: atu + - const: config + - const: apb + + clocks: + maxItems: 2 + + clock-names: + items: + - const: master + - const: aux + + interrupts: + maxItems: 3 + + interrupt-names: + items: + - const: pcie + - const: pcie_ev + - const: pcie_err + + num-lanes: + description: Number of lanes to use. + enum: [ 1, 2 ] + +required: + - compatible + - reg + - reg-names + - ranges + - clocks + - clock-names + - interrupts + - interrupt-names + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + #define KEEM_BAY_A53_PCIE + #define KEEM_BAY_A53_AUX_PCIE + pcie@37000000 { + compatible = "intel,keembay-pcie"; + reg = <0x37000000 0x00001000>, + <0x37300000 0x00001000>, + <0x36e00000 0x00200000>, + <0x37800000 0x00000200>; + reg-names = "dbi", "atu", "config", "apb"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x02000000 0 0x36000000 0x36000000 0 0x00e00000>; + interrupts = , + , + ; + interrupt-names = "pcie", "pcie_ev", "pcie_err"; + clocks = <&scmi_clk KEEM_BAY_A53_PCIE>, + <&scmi_clk KEEM_BAY_A53_AUX_PCIE>; + clock-names = "master", "aux"; + reset-gpios = <&pca2 9 GPIO_ACTIVE_LOW>; + num-lanes = <2>; + }; -- cgit v1.3-18-gd494 From 29fc76957a9754768cfa3884b413ffc10f82d3b4 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 20 Jul 2021 08:41:20 -0600 Subject: dt-bindings: Clean-up OPP binding node names in examples In preparation to convert OPP bindings to DT schema, clean-up a few OPP binding node names in the binding examples. Cc: Georgi Djakov Cc: Shawn Guo Cc: Sascha Hauer Cc: Leonard Crestez Acked-by: Viresh Kumar Signed-off-by: Rob Herring Acked-by: Georgi Djakov Signed-off-by: Viresh Kumar --- Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml | 2 +- Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml | 2 +- Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml index 0f73f436bea7..4bea51d1e7ea 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml @@ -136,7 +136,7 @@ examples: resets = <&reset 0>, <&reset 1>; }; - gpu_opp_table: opp_table0 { + gpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-533000000 { diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml index 696c17aedbbe..d209f272625d 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml @@ -160,7 +160,7 @@ examples: #cooling-cells = <2>; }; - gpu_opp_table: opp_table0 { + gpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-533000000 { diff --git a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml index a8873739d61a..b8204ed22dd5 100644 --- a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml +++ b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml @@ -81,10 +81,10 @@ examples: noc_opp_table: opp-table { compatible = "operating-points-v2"; - opp-133M { + opp-133333333 { opp-hz = /bits/ 64 <133333333>; }; - opp-800M { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; }; }; -- cgit v1.3-18-gd494 From 94274f20f6bf5eb0099bbf7e133aac1f5cd087e8 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 20 Jul 2021 08:41:21 -0600 Subject: dt-bindings: opp: Convert to DT schema Convert the OPP v1 and v2 bindings to DT schema format. As the OPPv2 binding can be extended by vendors, we need to split the common part out from the "operating-points-v2" conforming compatible. Cc: Yangtao Li Cc: Nishanth Menon Cc: Stephen Boyd Cc: Maxime Ripard Cc: Chen-Yu Tsai Acked-by: Viresh Kumar Signed-off-by: Rob Herring Acked-by: Maxime Ripard Signed-off-by: Viresh Kumar --- .../devicetree/bindings/cpufreq/cpufreq-dt.txt | 2 +- .../bindings/cpufreq/cpufreq-mediatek.txt | 2 +- .../devicetree/bindings/cpufreq/cpufreq-st.txt | 6 +- .../bindings/cpufreq/nvidia,tegra20-cpufreq.txt | 2 +- .../devicetree/bindings/devfreq/rk3399_dmc.txt | 2 +- .../opp/allwinner,sun50i-h6-operating-points.yaml | 4 + Documentation/devicetree/bindings/opp/opp-v1.yaml | 51 ++ .../devicetree/bindings/opp/opp-v2-base.yaml | 214 +++++++ Documentation/devicetree/bindings/opp/opp-v2.yaml | 475 ++++++++++++++++ Documentation/devicetree/bindings/opp/opp.txt | 622 --------------------- Documentation/devicetree/bindings/opp/qcom-opp.txt | 2 +- .../bindings/opp/ti-omap5-opp-supply.txt | 2 +- .../devicetree/bindings/power/power-domain.yaml | 2 +- 13 files changed, 753 insertions(+), 633 deletions(-) create mode 100644 Documentation/devicetree/bindings/opp/opp-v1.yaml create mode 100644 Documentation/devicetree/bindings/opp/opp-v2-base.yaml create mode 100644 Documentation/devicetree/bindings/opp/opp-v2.yaml delete mode 100644 Documentation/devicetree/bindings/opp/opp.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt index 56f442374383..1d7e49167666 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt @@ -11,7 +11,7 @@ Required properties: - None Optional properties: -- operating-points: Refer to Documentation/devicetree/bindings/opp/opp.txt for +- operating-points: Refer to Documentation/devicetree/bindings/opp/opp-v1.yaml for details. OPPs *must* be supplied either via DT, i.e. this property, or populated at runtime. - clock-latency: Specify the possible maximum transition latency for clock, diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt index ef68711716fb..b8233ec91d3d 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt @@ -10,7 +10,7 @@ Required properties: transition and not stable yet. Please refer to Documentation/devicetree/bindings/clock/clock-bindings.txt for generic clock consumer properties. -- operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp.txt +- operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp-v2.yaml for detail. - proc-supply: Regulator for Vproc of CPU cluster. diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt index d91a02a3b6b0..6b0b452acef0 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt @@ -6,8 +6,6 @@ from the SoC, then supplies the OPP framework with 'prop' and 'supported hardware' information respectively. The framework is then able to read the DT and operate in the usual way. -For more information about the expected DT format [See: ../opp/opp.txt]. - Frequency Scaling only ---------------------- @@ -15,7 +13,7 @@ No vendor specific driver required for this. Located in CPU's node: -- operating-points : [See: ../power/opp.txt] +- operating-points : [See: ../power/opp-v1.yaml] Example [safe] -------------- @@ -37,7 +35,7 @@ This requires the ST CPUFreq driver to supply 'process' and 'version' info. Located in CPU's node: -- operating-points-v2 : [See ../power/opp.txt] +- operating-points-v2 : [See ../power/opp-v2.yaml] Example [unsafe] ---------------- diff --git a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt index 52a24b82fd86..bdbfd7c36101 100644 --- a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt +++ b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt @@ -4,7 +4,7 @@ Binding for NVIDIA Tegra20 CPUFreq Required properties: - clocks: Must contain an entry for the CPU clock. See ../clocks/clock-bindings.txt for details. -- operating-points-v2: See ../bindings/opp/opp.txt for details. +- operating-points-v2: See ../bindings/opp/opp-v2.yaml for details. - #cooling-cells: Should be 2. See ../thermal/thermal-cooling-devices.yaml for details. For each opp entry in 'operating-points-v2' table: diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt index ac189dd82b08..3fbeb3733c48 100644 --- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt +++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt @@ -8,7 +8,7 @@ Required properties: - clocks: Phandles for clock specified in "clock-names" property - clock-names : The name of clock used by the DFI, must be "pclk_ddr_mon"; -- operating-points-v2: Refer to Documentation/devicetree/bindings/opp/opp.txt +- operating-points-v2: Refer to Documentation/devicetree/bindings/opp/opp-v2.yaml for details. - center-supply: DMC supply node. - status: Marks the node enabled/disabled. diff --git a/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml index aeff2bd774dd..729ae97b63d9 100644 --- a/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml +++ b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml @@ -18,6 +18,9 @@ description: | sun50i-cpufreq-nvmem driver reads the efuse value from the SoC to provide the OPP framework with required information. +allOf: + - $ref: opp-v2-base.yaml# + properties: compatible: const: allwinner,sun50i-h6-operating-points @@ -43,6 +46,7 @@ patternProperties: properties: opp-hz: true + clock-latency-ns: true patternProperties: "opp-microvolt-.*": true diff --git a/Documentation/devicetree/bindings/opp/opp-v1.yaml b/Documentation/devicetree/bindings/opp/opp-v1.yaml new file mode 100644 index 000000000000..d585d536a3fb --- /dev/null +++ b/Documentation/devicetree/bindings/opp/opp-v1.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/opp/opp-v1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic OPP (Operating Performance Points) v1 Bindings + +maintainers: + - Viresh Kumar + +description: |+ + Devices work at voltage-current-frequency combinations and some implementations + have the liberty of choosing these. These combinations are called Operating + Performance Points aka OPPs. This document defines bindings for these OPPs + applicable across wide range of devices. For illustration purpose, this document + uses CPU as a device. + + This binding only supports voltage-frequency pairs. + +select: true + +properties: + operating-points: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: Frequency in kHz + - description: Voltage for OPP in uV + + +additionalProperties: true +examples: + - | + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + operating-points = + /* kHz uV */ + <792000 1100000>, + <396000 950000>, + <198000 850000>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml new file mode 100644 index 000000000000..ae3ae4d39843 --- /dev/null +++ b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml @@ -0,0 +1,214 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/opp/opp-v2-base.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic OPP (Operating Performance Points) Common Binding + +maintainers: + - Viresh Kumar + +description: | + Devices work at voltage-current-frequency combinations and some implementations + have the liberty of choosing these. These combinations are called Operating + Performance Points aka OPPs. This document defines bindings for these OPPs + applicable across wide range of devices. For illustration purpose, this document + uses CPU as a device. + + This describes the OPPs belonging to a device. + +select: false + +properties: + $nodename: + pattern: '^opp-table(-[a-z0-9]+)?$' + + opp-shared: + description: + Indicates that device nodes using this OPP Table Node's phandle switch + their DVFS state together, i.e. they share clock/voltage/current lines. + Missing property means devices have independent clock/voltage/current + lines, but they share OPP tables. + type: boolean + +patternProperties: + '^opp-?[0-9]+$': + type: object + description: + One or more OPP nodes describing voltage-current-frequency combinations. + Their name isn't significant but their phandle can be used to reference an + OPP. These are mandatory except for the case where the OPP table is + present only to indicate dependency between devices using the opp-shared + property. + + properties: + opp-hz: + description: + Frequency in Hz, expressed as a 64-bit big-endian integer. This is a + required property for all device nodes, unless another "required" + property to uniquely identify the OPP nodes exists. Devices like power + domains must have another (implementation dependent) property. + + opp-microvolt: + description: | + Voltage for the OPP + + A single regulator's voltage is specified with an array of size one or three. + Single entry is for target voltage and three entries are for + voltages. + + Entries for multiple regulators shall be provided in the same field separated + by angular brackets <>. The OPP binding doesn't provide any provisions to + relate the values to their power supplies or the order in which the supplies + need to be configured and that is left for the implementation specific + binding. + + Entries for all regulators shall be of the same size, i.e. either all use a + single value or triplets. + minItems: 1 + maxItems: 8 # Should be enough regulators + items: + minItems: 1 + maxItems: 3 + + opp-microamp: + description: | + The maximum current drawn by the device in microamperes considering + system specific parameters (such as transients, process, aging, + maximum operating temperature range etc.) as necessary. This may be + used to set the most efficient regulator operating mode. + + Should only be set if opp-microvolt or opp-microvolt- is set for + the OPP. + + Entries for multiple regulators shall be provided in the same field + separated by angular brackets <>. If current values aren't required + for a regulator, then it shall be filled with 0. If current values + aren't required for any of the regulators, then this field is not + required. The OPP binding doesn't provide any provisions to relate the + values to their power supplies or the order in which the supplies need + to be configured and that is left for the implementation specific + binding. + minItems: 1 + maxItems: 8 # Should be enough regulators + + opp-level: + description: + A value representing the performance level of the device. + $ref: /schemas/types.yaml#/definitions/uint32 + + opp-peak-kBps: + description: + Peak bandwidth in kilobytes per second, expressed as an array of + 32-bit big-endian integers. Each element of the array represents the + peak bandwidth value of each interconnect path. The number of elements + should match the number of interconnect paths. + minItems: 1 + maxItems: 32 # Should be enough + + opp-avg-kBps: + description: + Average bandwidth in kilobytes per second, expressed as an array + of 32-bit big-endian integers. Each element of the array represents the + average bandwidth value of each interconnect path. The number of elements + should match the number of interconnect paths. This property is only + meaningful in OPP tables where opp-peak-kBps is present. + minItems: 1 + maxItems: 32 # Should be enough + + clock-latency-ns: + description: + Specifies the maximum possible transition latency (in nanoseconds) for + switching to this OPP from any other OPP. + + turbo-mode: + description: + Marks the OPP to be used only for turbo modes. Turbo mode is available + on some platforms, where the device can run over its operating + frequency for a short duration of time limited by the device's power, + current and thermal limits. + type: boolean + + opp-suspend: + description: + Marks the OPP to be used during device suspend. If multiple OPPs in + the table have this, the OPP with highest opp-hz will be used. + type: boolean + + opp-supported-hw: + description: | + This property allows a platform to enable only a subset of the OPPs + from the larger set present in the OPP table, based on the current + version of the hardware (already known to the operating system). + + Each block present in the array of blocks in this property, represents + a sub-group of hardware versions supported by the OPP. i.e. , , etc. The OPP will be enabled if _any_ of these + sub-groups match the hardware's version. + + Each sub-group is a platform defined array representing the hierarchy + of hardware versions supported by the platform. For a platform with + three hierarchical levels of version (X.Y.Z), this field shall look + like + + opp-supported-hw = , , . + + Each level (eg. X1) in version hierarchy is represented by a 32 bit + value, one bit per version and so there can be maximum 32 versions per + level. Logical AND (&) operation is performed for each level with the + hardware's level version and a non-zero output for _all_ the levels in + a sub-group means the OPP is supported by hardware. A value of + 0xFFFFFFFF for each level in the sub-group will enable the OPP for all + versions for the hardware. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + maxItems: 32 + items: + minItems: 1 + maxItems: 4 + + required-opps: + description: + This contains phandle to an OPP node in another device's OPP table. It + may contain an array of phandles, where each phandle points to an OPP + of a different device. It should not contain multiple phandles to the + OPP nodes in the same OPP table. This specifies the minimum required + OPP of the device(s), whose OPP's phandle is present in this property, + for the functioning of the current device at the current OPP (where + this property is present). + $ref: /schemas/types.yaml#/definitions/phandle-array + + patternProperties: + '^opp-microvolt-': + description: + Named opp-microvolt property. This is exactly similar to the above + opp-microvolt property, but allows multiple voltage ranges to be + provided for the same OPP. At runtime, the platform can pick a + and matching opp-microvolt- property will be enabled for all + OPPs. If the platform doesn't pick a specific or the + doesn't match with any opp-microvolt- properties, then + opp-microvolt property shall be used, if present. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 1 + maxItems: 8 # Should be enough regulators + items: + minItems: 1 + maxItems: 3 + + '^opp-microamp-': + description: + Named opp-microamp property. Similar to opp-microvolt- property, + but for microamp instead. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 # Should be enough regulators + + dependencies: + opp-avg-kBps: [ opp-peak-kBps ] + +required: + - compatible + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/opp/opp-v2.yaml b/Documentation/devicetree/bindings/opp/opp-v2.yaml new file mode 100644 index 000000000000..eaf8fba2c691 --- /dev/null +++ b/Documentation/devicetree/bindings/opp/opp-v2.yaml @@ -0,0 +1,475 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/opp/opp-v2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic OPP (Operating Performance Points) Bindings + +maintainers: + - Viresh Kumar + +allOf: + - $ref: opp-v2-base.yaml# + +properties: + compatible: + const: operating-points-v2 + +unevaluatedProperties: false + +examples: + - | + /* + * Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states + * together. + */ + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + clocks = <&clk_controller 0>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply0>; + operating-points-v2 = <&cpu0_opp_table0>; + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + clocks = <&clk_controller 0>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply0>; + operating-points-v2 = <&cpu0_opp_table0>; + }; + }; + + cpu0_opp_table0: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <975000 970000 985000>; + opp-microamp = <70000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + opp-1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1000000 980000 1010000>; + opp-microamp = <80000>; + clock-latency-ns = <310000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1025000>; + clock-latency-ns = <290000>; + turbo-mode; + }; + }; + + - | + /* + * Example 2: Single cluster, Quad-core Qualcom-krait, switches DVFS states + * independently. + */ + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "qcom,krait"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + clocks = <&clk_controller 0>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply0>; + operating-points-v2 = <&cpu_opp_table>; + }; + + cpu@1 { + compatible = "qcom,krait"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + clocks = <&clk_controller 1>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply1>; + operating-points-v2 = <&cpu_opp_table>; + }; + + cpu@2 { + compatible = "qcom,krait"; + device_type = "cpu"; + reg = <2>; + next-level-cache = <&L2>; + clocks = <&clk_controller 2>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply2>; + operating-points-v2 = <&cpu_opp_table>; + }; + + cpu@3 { + compatible = "qcom,krait"; + device_type = "cpu"; + reg = <3>; + next-level-cache = <&L2>; + clocks = <&clk_controller 3>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply3>; + operating-points-v2 = <&cpu_opp_table>; + }; + }; + + cpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* + * Missing opp-shared property means CPUs switch DVFS states + * independently. + */ + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <975000 970000 985000>; + opp-microamp = <70000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + opp-1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1000000 980000 1010000>; + opp-microamp = <80000>; + clock-latency-ns = <310000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1025000>; + opp-microamp = <90000>; + lock-latency-ns = <290000>; + turbo-mode; + }; + }; + + - | + /* + * Example 3: Dual-cluster, Dual-core per cluster. CPUs within a cluster switch + * DVFS state together. + */ + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + clocks = <&clk_controller 0>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply0>; + operating-points-v2 = <&cluster0_opp>; + }; + + cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + clocks = <&clk_controller 0>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply0>; + operating-points-v2 = <&cluster0_opp>; + }; + + cpu@100 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <100>; + next-level-cache = <&L2>; + clocks = <&clk_controller 1>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply1>; + operating-points-v2 = <&cluster1_opp>; + }; + + cpu@101 { + compatible = "arm,cortex-a15"; + device_type = "cpu"; + reg = <101>; + next-level-cache = <&L2>; + clocks = <&clk_controller 1>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply1>; + operating-points-v2 = <&cluster1_opp>; + }; + }; + + cluster0_opp: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <975000 970000 985000>; + opp-microamp = <70000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + opp-1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1000000 980000 1010000>; + opp-microamp = <80000>; + clock-latency-ns = <310000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1025000>; + opp-microamp = <90000>; + clock-latency-ns = <290000>; + turbo-mode; + }; + }; + + cluster1_opp: opp-table-1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1050000 1045000 1055000>; + opp-microamp = <95000>; + clock-latency-ns = <400000>; + opp-suspend; + }; + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <1075000>; + opp-microamp = <100000>; + clock-latency-ns = <400000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1100000 1010000 1110000>; + opp-microamp = <95000>; + clock-latency-ns = <400000>; + turbo-mode; + }; + }; + + - | + /* Example 4: Handling multiple regulators */ + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "foo,cpu-type"; + device_type = "cpu"; + reg = <0>; + + vcc0-supply = <&cpu_supply0>; + vcc1-supply = <&cpu_supply1>; + vcc2-supply = <&cpu_supply2>; + operating-points-v2 = <&cpu0_opp_table4>; + }; + }; + + cpu0_opp_table4: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <970000>, /* Supply 0 */ + <960000>, /* Supply 1 */ + <960000>; /* Supply 2 */ + opp-microamp = <70000>, /* Supply 0 */ + <70000>, /* Supply 1 */ + <70000>; /* Supply 2 */ + clock-latency-ns = <300000>; + }; + + /* OR */ + + opp-1000000001 { + opp-hz = /bits/ 64 <1000000001>; + opp-microvolt = <975000 970000 985000>, /* Supply 0 */ + <965000 960000 975000>, /* Supply 1 */ + <965000 960000 975000>; /* Supply 2 */ + opp-microamp = <70000>, /* Supply 0 */ + <70000>, /* Supply 1 */ + <70000>; /* Supply 2 */ + clock-latency-ns = <300000>; + }; + + /* OR */ + + opp-1000000002 { + opp-hz = /bits/ 64 <1000000002>; + opp-microvolt = <975000 970000 985000>, /* Supply 0 */ + <965000 960000 975000>, /* Supply 1 */ + <965000 960000 975000>; /* Supply 2 */ + opp-microamp = <70000>, /* Supply 0 */ + <0>, /* Supply 1 doesn't need this */ + <70000>; /* Supply 2 */ + clock-latency-ns = <300000>; + }; + }; + + - | + /* + * Example 5: opp-supported-hw + * (example: three level hierarchy of versions: cuts, substrate and process) + */ + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + cpu-supply = <&cpu_supply>; + operating-points-v2 = <&cpu0_opp_table_slow>; + }; + }; + + cpu0_opp_table_slow: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-600000000 { + /* + * Supports all substrate and process versions for 0xF + * cuts, i.e. only first four cuts. + */ + opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF>; + opp-hz = /bits/ 64 <600000000>; + }; + + opp-800000000 { + /* + * Supports: + * - cuts: only one, 6th cut (represented by 6th bit). + * - substrate: supports 16 different substrate versions + * - process: supports 9 different process versions + */ + opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0>; + opp-hz = /bits/ 64 <800000000>; + }; + + opp-900000000 { + /* + * Supports: + * - All cuts and substrate where process version is 0x2. + * - All cuts and process where substrate version is 0x2. + */ + opp-supported-hw = <0xFFFFFFFF 0xFFFFFFFF 0x02>, + <0xFFFFFFFF 0x01 0xFFFFFFFF>; + opp-hz = /bits/ 64 <900000000>; + }; + }; + + - | + /* + * Example 6: opp-microvolt-, opp-microamp-: + * (example: device with two possible microvolt ranges: slow and fast) + */ + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + operating-points-v2 = <&cpu0_opp_table6>; + }; + }; + + cpu0_opp_table6: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt-slow = <915000 900000 925000>; + opp-microvolt-fast = <975000 970000 985000>; + opp-microamp-slow = <70000>; + opp-microamp-fast = <71000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt-slow = <915000 900000 925000>, /* Supply vcc0 */ + <925000 910000 935000>; /* Supply vcc1 */ + opp-microvolt-fast = <975000 970000 985000>, /* Supply vcc0 */ + <965000 960000 975000>; /* Supply vcc1 */ + opp-microamp = <70000>; /* Will be used for both slow/fast */ + }; + }; + + - | + /* + * Example 7: Single cluster Quad-core ARM cortex A53, OPP points from firmware, + * distinct clock controls but two sets of clock/voltage/current lines. + */ + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x100>; + next-level-cache = <&A53_L2>; + clocks = <&dvfs_controller 0>; + operating-points-v2 = <&cpu_opp0_table>; + }; + cpu@1 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x101>; + next-level-cache = <&A53_L2>; + clocks = <&dvfs_controller 1>; + operating-points-v2 = <&cpu_opp0_table>; + }; + cpu@2 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x102>; + next-level-cache = <&A53_L2>; + clocks = <&dvfs_controller 2>; + operating-points-v2 = <&cpu_opp1_table>; + }; + cpu@3 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x103>; + next-level-cache = <&A53_L2>; + clocks = <&dvfs_controller 3>; + operating-points-v2 = <&cpu_opp1_table>; + }; + + }; + + cpu_opp0_table: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + }; + + cpu_opp1_table: opp-table-1 { + compatible = "operating-points-v2"; + opp-shared; + }; +... diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt deleted file mode 100644 index 08b3da4736cf..000000000000 --- a/Documentation/devicetree/bindings/opp/opp.txt +++ /dev/null @@ -1,622 +0,0 @@ -Generic OPP (Operating Performance Points) Bindings ----------------------------------------------------- - -Devices work at voltage-current-frequency combinations and some implementations -have the liberty of choosing these. These combinations are called Operating -Performance Points aka OPPs. This document defines bindings for these OPPs -applicable across wide range of devices. For illustration purpose, this document -uses CPU as a device. - -This document contain multiple versions of OPP binding and only one of them -should be used per device. - -Binding 1: operating-points -============================ - -This binding only supports voltage-frequency pairs. - -Properties: -- operating-points: An array of 2-tuples items, and each item consists - of frequency and voltage like . - freq: clock frequency in kHz - vol: voltage in microvolt - -Examples: - -cpu@0 { - compatible = "arm,cortex-a9"; - reg = <0>; - next-level-cache = <&L2>; - operating-points = < - /* kHz uV */ - 792000 1100000 - 396000 950000 - 198000 850000 - >; -}; - - -Binding 2: operating-points-v2 -============================ - -* Property: operating-points-v2 - -Devices supporting OPPs must set their "operating-points-v2" property with -phandle to a OPP table in their DT node. The OPP core will use this phandle to -find the operating points for the device. - -This can contain more than one phandle for power domain providers that provide -multiple power domains. That is, one phandle for each power domain. If only one -phandle is available, then the same OPP table will be used for all power domains -provided by the power domain provider. - -If required, this can be extended for SoC vendor specific bindings. Such bindings -should be documented as Documentation/devicetree/bindings/power/-opp.txt -and should have a compatible description like: "operating-points-v2-". - -* OPP Table Node - -This describes the OPPs belonging to a device. This node can have following -properties: - -Required properties: -- compatible: Allow OPPs to express their compatibility. It should be: - "operating-points-v2". - -- OPP nodes: One or more OPP nodes describing voltage-current-frequency - combinations. Their name isn't significant but their phandle can be used to - reference an OPP. These are mandatory except for the case where the OPP table - is present only to indicate dependency between devices using the opp-shared - property. - -Optional properties: -- opp-shared: Indicates that device nodes using this OPP Table Node's phandle - switch their DVFS state together, i.e. they share clock/voltage/current lines. - Missing property means devices have independent clock/voltage/current lines, - but they share OPP tables. - -- status: Marks the OPP table enabled/disabled. - - -* OPP Node - -This defines voltage-current-frequency combinations along with other related -properties. - -Required properties: -- opp-hz: Frequency in Hz, expressed as a 64-bit big-endian integer. This is a - required property for all device nodes, unless another "required" property to - uniquely identify the OPP nodes exists. Devices like power domains must have - another (implementation dependent) property. - -- opp-peak-kBps: Peak bandwidth in kilobytes per second, expressed as an array - of 32-bit big-endian integers. Each element of the array represents the - peak bandwidth value of each interconnect path. The number of elements should - match the number of interconnect paths. - -Optional properties: -- opp-microvolt: voltage in micro Volts. - - A single regulator's voltage is specified with an array of size one or three. - Single entry is for target voltage and three entries are for - voltages. - - Entries for multiple regulators shall be provided in the same field separated - by angular brackets <>. The OPP binding doesn't provide any provisions to - relate the values to their power supplies or the order in which the supplies - need to be configured and that is left for the implementation specific - binding. - - Entries for all regulators shall be of the same size, i.e. either all use a - single value or triplets. - -- opp-microvolt-: Named opp-microvolt property. This is exactly similar to - the above opp-microvolt property, but allows multiple voltage ranges to be - provided for the same OPP. At runtime, the platform can pick a and - matching opp-microvolt- property will be enabled for all OPPs. If the - platform doesn't pick a specific or the doesn't match with any - opp-microvolt- properties, then opp-microvolt property shall be used, if - present. - -- opp-microamp: The maximum current drawn by the device in microamperes - considering system specific parameters (such as transients, process, aging, - maximum operating temperature range etc.) as necessary. This may be used to - set the most efficient regulator operating mode. - - Should only be set if opp-microvolt is set for the OPP. - - Entries for multiple regulators shall be provided in the same field separated - by angular brackets <>. If current values aren't required for a regulator, - then it shall be filled with 0. If current values aren't required for any of - the regulators, then this field is not required. The OPP binding doesn't - provide any provisions to relate the values to their power supplies or the - order in which the supplies need to be configured and that is left for the - implementation specific binding. - -- opp-microamp-: Named opp-microamp property. Similar to - opp-microvolt- property, but for microamp instead. - -- opp-level: A value representing the performance level of the device, - expressed as a 32-bit integer. - -- opp-avg-kBps: Average bandwidth in kilobytes per second, expressed as an array - of 32-bit big-endian integers. Each element of the array represents the - average bandwidth value of each interconnect path. The number of elements - should match the number of interconnect paths. This property is only - meaningful in OPP tables where opp-peak-kBps is present. - -- clock-latency-ns: Specifies the maximum possible transition latency (in - nanoseconds) for switching to this OPP from any other OPP. - -- turbo-mode: Marks the OPP to be used only for turbo modes. Turbo mode is - available on some platforms, where the device can run over its operating - frequency for a short duration of time limited by the device's power, current - and thermal limits. - -- opp-suspend: Marks the OPP to be used during device suspend. If multiple OPPs - in the table have this, the OPP with highest opp-hz will be used. - -- opp-supported-hw: This property allows a platform to enable only a subset of - the OPPs from the larger set present in the OPP table, based on the current - version of the hardware (already known to the operating system). - - Each block present in the array of blocks in this property, represents a - sub-group of hardware versions supported by the OPP. i.e. , - , etc. The OPP will be enabled if _any_ of these sub-groups match - the hardware's version. - - Each sub-group is a platform defined array representing the hierarchy of - hardware versions supported by the platform. For a platform with three - hierarchical levels of version (X.Y.Z), this field shall look like - - opp-supported-hw = , , . - - Each level (eg. X1) in version hierarchy is represented by a 32 bit value, one - bit per version and so there can be maximum 32 versions per level. Logical AND - (&) operation is performed for each level with the hardware's level version - and a non-zero output for _all_ the levels in a sub-group means the OPP is - supported by hardware. A value of 0xFFFFFFFF for each level in the sub-group - will enable the OPP for all versions for the hardware. - -- status: Marks the node enabled/disabled. - -- required-opps: This contains phandle to an OPP node in another device's OPP - table. It may contain an array of phandles, where each phandle points to an - OPP of a different device. It should not contain multiple phandles to the OPP - nodes in the same OPP table. This specifies the minimum required OPP of the - device(s), whose OPP's phandle is present in this property, for the - functioning of the current device at the current OPP (where this property is - present). - -Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together. - -/ { - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "arm,cortex-a9"; - reg = <0>; - next-level-cache = <&L2>; - clocks = <&clk_controller 0>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply0>; - operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu@1 { - compatible = "arm,cortex-a9"; - reg = <1>; - next-level-cache = <&L2>; - clocks = <&clk_controller 0>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply0>; - operating-points-v2 = <&cpu0_opp_table>; - }; - }; - - cpu0_opp_table: opp_table0 { - compatible = "operating-points-v2"; - opp-shared; - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <975000 970000 985000>; - opp-microamp = <70000>; - clock-latency-ns = <300000>; - opp-suspend; - }; - opp-1100000000 { - opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <1000000 980000 1010000>; - opp-microamp = <80000>; - clock-latency-ns = <310000>; - }; - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1025000>; - clock-latency-ns = <290000>; - turbo-mode; - }; - }; -}; - -Example 2: Single cluster, Quad-core Qualcom-krait, switches DVFS states -independently. - -/ { - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "qcom,krait"; - reg = <0>; - next-level-cache = <&L2>; - clocks = <&clk_controller 0>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply0>; - operating-points-v2 = <&cpu_opp_table>; - }; - - cpu@1 { - compatible = "qcom,krait"; - reg = <1>; - next-level-cache = <&L2>; - clocks = <&clk_controller 1>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply1>; - operating-points-v2 = <&cpu_opp_table>; - }; - - cpu@2 { - compatible = "qcom,krait"; - reg = <2>; - next-level-cache = <&L2>; - clocks = <&clk_controller 2>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply2>; - operating-points-v2 = <&cpu_opp_table>; - }; - - cpu@3 { - compatible = "qcom,krait"; - reg = <3>; - next-level-cache = <&L2>; - clocks = <&clk_controller 3>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply3>; - operating-points-v2 = <&cpu_opp_table>; - }; - }; - - cpu_opp_table: opp_table { - compatible = "operating-points-v2"; - - /* - * Missing opp-shared property means CPUs switch DVFS states - * independently. - */ - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <975000 970000 985000>; - opp-microamp = <70000>; - clock-latency-ns = <300000>; - opp-suspend; - }; - opp-1100000000 { - opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <1000000 980000 1010000>; - opp-microamp = <80000>; - clock-latency-ns = <310000>; - }; - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1025000>; - opp-microamp = <90000; - lock-latency-ns = <290000>; - turbo-mode; - }; - }; -}; - -Example 3: Dual-cluster, Dual-core per cluster. CPUs within a cluster switch -DVFS state together. - -/ { - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "arm,cortex-a7"; - reg = <0>; - next-level-cache = <&L2>; - clocks = <&clk_controller 0>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply0>; - operating-points-v2 = <&cluster0_opp>; - }; - - cpu@1 { - compatible = "arm,cortex-a7"; - reg = <1>; - next-level-cache = <&L2>; - clocks = <&clk_controller 0>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply0>; - operating-points-v2 = <&cluster0_opp>; - }; - - cpu@100 { - compatible = "arm,cortex-a15"; - reg = <100>; - next-level-cache = <&L2>; - clocks = <&clk_controller 1>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply1>; - operating-points-v2 = <&cluster1_opp>; - }; - - cpu@101 { - compatible = "arm,cortex-a15"; - reg = <101>; - next-level-cache = <&L2>; - clocks = <&clk_controller 1>; - clock-names = "cpu"; - cpu-supply = <&cpu_supply1>; - operating-points-v2 = <&cluster1_opp>; - }; - }; - - cluster0_opp: opp_table0 { - compatible = "operating-points-v2"; - opp-shared; - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <975000 970000 985000>; - opp-microamp = <70000>; - clock-latency-ns = <300000>; - opp-suspend; - }; - opp-1100000000 { - opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <1000000 980000 1010000>; - opp-microamp = <80000>; - clock-latency-ns = <310000>; - }; - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1025000>; - opp-microamp = <90000>; - clock-latency-ns = <290000>; - turbo-mode; - }; - }; - - cluster1_opp: opp_table1 { - compatible = "operating-points-v2"; - opp-shared; - - opp-1300000000 { - opp-hz = /bits/ 64 <1300000000>; - opp-microvolt = <1050000 1045000 1055000>; - opp-microamp = <95000>; - clock-latency-ns = <400000>; - opp-suspend; - }; - opp-1400000000 { - opp-hz = /bits/ 64 <1400000000>; - opp-microvolt = <1075000>; - opp-microamp = <100000>; - clock-latency-ns = <400000>; - }; - opp-1500000000 { - opp-hz = /bits/ 64 <1500000000>; - opp-microvolt = <1100000 1010000 1110000>; - opp-microamp = <95000>; - clock-latency-ns = <400000>; - turbo-mode; - }; - }; -}; - -Example 4: Handling multiple regulators - -/ { - cpus { - cpu@0 { - compatible = "vendor,cpu-type"; - ... - - vcc0-supply = <&cpu_supply0>; - vcc1-supply = <&cpu_supply1>; - vcc2-supply = <&cpu_supply2>; - operating-points-v2 = <&cpu0_opp_table>; - }; - }; - - cpu0_opp_table: opp_table0 { - compatible = "operating-points-v2"; - opp-shared; - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <970000>, /* Supply 0 */ - <960000>, /* Supply 1 */ - <960000>; /* Supply 2 */ - opp-microamp = <70000>, /* Supply 0 */ - <70000>, /* Supply 1 */ - <70000>; /* Supply 2 */ - clock-latency-ns = <300000>; - }; - - /* OR */ - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <975000 970000 985000>, /* Supply 0 */ - <965000 960000 975000>, /* Supply 1 */ - <965000 960000 975000>; /* Supply 2 */ - opp-microamp = <70000>, /* Supply 0 */ - <70000>, /* Supply 1 */ - <70000>; /* Supply 2 */ - clock-latency-ns = <300000>; - }; - - /* OR */ - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <975000 970000 985000>, /* Supply 0 */ - <965000 960000 975000>, /* Supply 1 */ - <965000 960000 975000>; /* Supply 2 */ - opp-microamp = <70000>, /* Supply 0 */ - <0>, /* Supply 1 doesn't need this */ - <70000>; /* Supply 2 */ - clock-latency-ns = <300000>; - }; - }; -}; - -Example 5: opp-supported-hw -(example: three level hierarchy of versions: cuts, substrate and process) - -/ { - cpus { - cpu@0 { - compatible = "arm,cortex-a7"; - ... - - cpu-supply = <&cpu_supply> - operating-points-v2 = <&cpu0_opp_table_slow>; - }; - }; - - opp_table { - compatible = "operating-points-v2"; - opp-shared; - - opp-600000000 { - /* - * Supports all substrate and process versions for 0xF - * cuts, i.e. only first four cuts. - */ - opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF> - opp-hz = /bits/ 64 <600000000>; - ... - }; - - opp-800000000 { - /* - * Supports: - * - cuts: only one, 6th cut (represented by 6th bit). - * - substrate: supports 16 different substrate versions - * - process: supports 9 different process versions - */ - opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0> - opp-hz = /bits/ 64 <800000000>; - ... - }; - - opp-900000000 { - /* - * Supports: - * - All cuts and substrate where process version is 0x2. - * - All cuts and process where substrate version is 0x2. - */ - opp-supported-hw = <0xFFFFFFFF 0xFFFFFFFF 0x02>, <0xFFFFFFFF 0x01 0xFFFFFFFF> - opp-hz = /bits/ 64 <900000000>; - ... - }; - }; -}; - -Example 6: opp-microvolt-, opp-microamp-: -(example: device with two possible microvolt ranges: slow and fast) - -/ { - cpus { - cpu@0 { - compatible = "arm,cortex-a7"; - ... - - operating-points-v2 = <&cpu0_opp_table>; - }; - }; - - cpu0_opp_table: opp_table0 { - compatible = "operating-points-v2"; - opp-shared; - - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt-slow = <915000 900000 925000>; - opp-microvolt-fast = <975000 970000 985000>; - opp-microamp-slow = <70000>; - opp-microamp-fast = <71000>; - }; - - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt-slow = <915000 900000 925000>, /* Supply vcc0 */ - <925000 910000 935000>; /* Supply vcc1 */ - opp-microvolt-fast = <975000 970000 985000>, /* Supply vcc0 */ - <965000 960000 975000>; /* Supply vcc1 */ - opp-microamp = <70000>; /* Will be used for both slow/fast */ - }; - }; -}; - -Example 7: Single cluster Quad-core ARM cortex A53, OPP points from firmware, -distinct clock controls but two sets of clock/voltage/current lines. - -/ { - cpus { - #address-cells = <2>; - #size-cells = <0>; - - cpu@0 { - compatible = "arm,cortex-a53"; - reg = <0x0 0x100>; - next-level-cache = <&A53_L2>; - clocks = <&dvfs_controller 0>; - operating-points-v2 = <&cpu_opp0_table>; - }; - cpu@1 { - compatible = "arm,cortex-a53"; - reg = <0x0 0x101>; - next-level-cache = <&A53_L2>; - clocks = <&dvfs_controller 1>; - operating-points-v2 = <&cpu_opp0_table>; - }; - cpu@2 { - compatible = "arm,cortex-a53"; - reg = <0x0 0x102>; - next-level-cache = <&A53_L2>; - clocks = <&dvfs_controller 2>; - operating-points-v2 = <&cpu_opp1_table>; - }; - cpu@3 { - compatible = "arm,cortex-a53"; - reg = <0x0 0x103>; - next-level-cache = <&A53_L2>; - clocks = <&dvfs_controller 3>; - operating-points-v2 = <&cpu_opp1_table>; - }; - - }; - - cpu_opp0_table: opp0_table { - compatible = "operating-points-v2"; - opp-shared; - }; - - cpu_opp1_table: opp1_table { - compatible = "operating-points-v2"; - opp-shared; - }; -}; diff --git a/Documentation/devicetree/bindings/opp/qcom-opp.txt b/Documentation/devicetree/bindings/opp/qcom-opp.txt index 32eb0793c7e6..41d3e4ff2dc3 100644 --- a/Documentation/devicetree/bindings/opp/qcom-opp.txt +++ b/Documentation/devicetree/bindings/opp/qcom-opp.txt @@ -1,7 +1,7 @@ Qualcomm OPP bindings to describe OPP nodes The bindings are based on top of the operating-points-v2 bindings -described in Documentation/devicetree/bindings/opp/opp.txt +described in Documentation/devicetree/bindings/opp/opp-v2-base.yaml Additional properties are described below. * OPP Table Node diff --git a/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt b/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt index 832346e489a3..b70d326117cd 100644 --- a/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt +++ b/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt @@ -13,7 +13,7 @@ regulators to the device that will undergo OPP transitions we can make use of the multi regulator binding that is part of the OPP core described here [1] to describe both regulators needed by the platform. -[1] Documentation/devicetree/bindings/opp/opp.txt +[1] Documentation/devicetree/bindings/opp/opp-v2.yaml Required Properties for Device Node: - vdd-supply: phandle to regulator controlling VDD supply diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml index aed51e9dcb11..3143ed9a3313 100644 --- a/Documentation/devicetree/bindings/power/power-domain.yaml +++ b/Documentation/devicetree/bindings/power/power-domain.yaml @@ -46,7 +46,7 @@ properties: Phandles to the OPP tables of power domains provided by a power domain provider. If the provider provides a single power domain only or all the power domains provided by the provider have identical OPP tables, - then this shall contain a single phandle. Refer to ../opp/opp.txt + then this shall contain a single phandle. Refer to ../opp/opp-v2-base.yaml for more information. "#power-domain-cells": -- cgit v1.3-18-gd494 From aa6eca5b81663a59e1a8765481eb48fa2edfab05 Mon Sep 17 00:00:00 2001 From: Chuanjia Liu Date: Mon, 23 Aug 2021 11:27:55 +0800 Subject: dt-bindings: PCI: mediatek: Update the Device tree bindings There are two independent PCIe controllers in MT2712 and MT7622 platform. Each of them should contain an independent MSI domain. In old dts architecture, MSI domain will be inherited from the root bridge, and all of the devices will share the same MSI domain. Hence that, the PCIe devices will not work properly if the irq number which required is more than 32. Split the PCIe node for MT2712 and MT7622 platform to comply with the hardware design and fix MSI issue. Link: https://lore.kernel.org/r/20210823032800.1660-2-chuanjia.liu@mediatek.com Signed-off-by: Chuanjia Liu Signed-off-by: Lorenzo Pieralisi Reviewed-by: Rob Herring Acked-by: Ryder Lee --- .../devicetree/bindings/pci/mediatek-pcie-cfg.yaml | 39 ++++ .../devicetree/bindings/pci/mediatek-pcie.txt | 206 +++++++++++---------- 2 files changed, 150 insertions(+), 95 deletions(-) create mode 100644 Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml new file mode 100644 index 000000000000..841a3d284bbf --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/mediatek-pcie-cfg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek PCIECFG controller + +maintainers: + - Chuanjia Liu + - Jianjun Wang + +description: | + The MediaTek PCIECFG controller controls some feature about + LTSSM, ASPM and so on. + +properties: + compatible: + items: + - enum: + - mediatek,generic-pciecfg + - const: syscon + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pciecfg: pciecfg@1a140000 { + compatible = "mediatek,generic-pciecfg", "syscon"; + reg = <0x1a140000 0x1000>; + }; +... diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt index 7468d666763a..57ae73462272 100644 --- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt @@ -8,7 +8,7 @@ Required properties: "mediatek,mt7623-pcie" "mediatek,mt7629-pcie" - device_type: Must be "pci" -- reg: Base addresses and lengths of the PCIe subsys and root ports. +- reg: Base addresses and lengths of the root ports. - reg-names: Names of the above areas to use during resource lookup. - #address-cells: Address representation for root ports (must be 3) - #size-cells: Size representation for root ports (must be 2) @@ -47,9 +47,12 @@ Required properties for MT7623/MT2701: - reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the number of root ports. -Required properties for MT2712/MT7622: +Required properties for MT2712/MT7622/MT7629: -interrupts: A list of interrupt outputs of the controller, must have one entry for each PCIe port +- interrupt-names: Must include the following entries: + - "pcie_irq": The interrupt that is asserted when an MSI/INTX is received +- linux,pci-domain: PCI domain ID. Should be unique for each host controller In addition, the device tree node must have sub-nodes describing each PCIe port interface, having the following mandatory properties: @@ -143,130 +146,143 @@ Examples for MT7623: Examples for MT2712: - pcie: pcie@11700000 { + pcie1: pcie@112ff000 { compatible = "mediatek,mt2712-pcie"; device_type = "pci"; - reg = <0 0x11700000 0 0x1000>, - <0 0x112ff000 0 0x1000>; - reg-names = "port0", "port1"; + reg = <0 0x112ff000 0 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; #address-cells = <3>; #size-cells = <2>; - interrupts = , - ; - clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, - <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, - <&pericfg CLK_PERI_PCIE0>, + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, <&pericfg CLK_PERI_PCIE1>; - clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1"; - phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>; - phy-names = "pcie-phy0", "pcie-phy1"; + clock-names = "sys_ck1", "ahb_ck1"; + phys = <&u3port1 PHY_TYPE_PCIE>; + phy-names = "pcie-phy1"; bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + ranges = <0x82000000 0 0x11400000 0x0 0x11400000 0 0x300000>; + status = "disabled"; - pcie0: pcie@0,0 { - reg = <0x0000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc0 0>, - <0 0 0 2 &pcie_intc0 1>, - <0 0 0 3 &pcie_intc0 2>, - <0 0 0 4 &pcie_intc0 3>; - pcie_intc0: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; }; + }; - pcie1: pcie@1,0 { - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; + pcie0: pcie@11700000 { + compatible = "mediatek,mt2712-pcie"; + device_type = "pci"; + reg = <0 0x11700000 0 0x1000>; + reg-names = "port0"; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, + <&pericfg CLK_PERI_PCIE0>; + clock-names = "sys_ck0", "ahb_ck0"; + phys = <&u3port0 PHY_TYPE_PCIE>; + phy-names = "pcie-phy0"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + status = "disabled"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc1 0>, - <0 0 0 2 &pcie_intc1 1>, - <0 0 0 3 &pcie_intc1 2>, - <0 0 0 4 &pcie_intc1 3>; - pcie_intc1: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; }; }; Examples for MT7622: - pcie: pcie@1a140000 { + pcie0: pcie@1a143000 { compatible = "mediatek,mt7622-pcie"; device_type = "pci"; - reg = <0 0x1a140000 0 0x1000>, - <0 0x1a143000 0 0x1000>, - <0 0x1a145000 0 0x1000>; - reg-names = "subsys", "port0", "port1"; + reg = <0 0x1a143000 0 0x1000>; + reg-names = "port0"; + linux,pci-domain = <0>; #address-cells = <3>; #size-cells = <2>; - interrupts = , - ; + interrupts = ; + interrupt-names = "pcie_irq"; clocks = <&pciesys CLK_PCIE_P0_MAC_EN>, - <&pciesys CLK_PCIE_P1_MAC_EN>, <&pciesys CLK_PCIE_P0_AHB_EN>, - <&pciesys CLK_PCIE_P1_AHB_EN>, <&pciesys CLK_PCIE_P0_AUX_EN>, - <&pciesys CLK_PCIE_P1_AUX_EN>, <&pciesys CLK_PCIE_P0_AXI_EN>, - <&pciesys CLK_PCIE_P1_AXI_EN>, <&pciesys CLK_PCIE_P0_OBFF_EN>, - <&pciesys CLK_PCIE_P1_OBFF_EN>, - <&pciesys CLK_PCIE_P0_PIPE_EN>, - <&pciesys CLK_PCIE_P1_PIPE_EN>; - clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1", - "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1", - "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1"; - phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>; - phy-names = "pcie-phy0", "pcie-phy1"; + <&pciesys CLK_PCIE_P0_PIPE_EN>; + clock-names = "sys_ck0", "ahb_ck0", "aux_ck0", + "axi_ck0", "obff_ck0", "pipe_ck0"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>; + status = "disabled"; - pcie0: pcie@0,0 { - reg = <0x0000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc0 0>, - <0 0 0 2 &pcie_intc0 1>, - <0 0 0 3 &pcie_intc0 2>, - <0 0 0 4 &pcie_intc0 3>; - pcie_intc0: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; }; + }; - pcie1: pcie@1,0 { - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; + pcie1: pcie@1a145000 { + compatible = "mediatek,mt7622-pcie"; + device_type = "pci"; + reg = <0 0x1a145000 0 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&pciesys CLK_PCIE_P1_MAC_EN>, + /* designer has connect RC1 with p0_ahb clock */ + <&pciesys CLK_PCIE_P0_AHB_EN>, + <&pciesys CLK_PCIE_P1_AUX_EN>, + <&pciesys CLK_PCIE_P1_AXI_EN>, + <&pciesys CLK_PCIE_P1_OBFF_EN>, + <&pciesys CLK_PCIE_P1_PIPE_EN>; + clock-names = "sys_ck1", "ahb_ck1", "aux_ck1", + "axi_ck1", "obff_ck1", "pipe_ck1"; + + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>; + status = "disabled"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc1 0>, - <0 0 0 2 &pcie_intc1 1>, - <0 0 0 3 &pcie_intc1 2>, - <0 0 0 4 &pcie_intc1 3>; - pcie_intc1: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; }; }; -- cgit v1.3-18-gd494 From 9b9b12537d3a7b5bea6b9e8f20bffc2338724269 Mon Sep 17 00:00:00 2001 From: Biju Das Date: Fri, 6 Aug 2021 10:53:20 +0100 Subject: dt-bindings: dma: Document RZ/G2L bindings Document RZ/G2L DMAC bindings. Signed-off-by: Biju Das Reviewed-by: Lad Prabhakar Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20210806095322.2326-2-biju.das.jz@bp.renesas.com Signed-off-by: Vinod Koul --- .../devicetree/bindings/dma/renesas,rz-dmac.yaml | 130 +++++++++++++++++++++ 1 file changed, 130 insertions(+) create mode 100644 Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml new file mode 100644 index 000000000000..7a4f415d74dc --- /dev/null +++ b/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/renesas,rz-dmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G2L DMA Controller + +maintainers: + - Biju Das + +allOf: + - $ref: "dma-controller.yaml#" + +properties: + compatible: + items: + - enum: + - renesas,r9a07g044-dmac # RZ/G2{L,LC} + - const: renesas,rz-dmac + + reg: + items: + - description: Control and channel register block + - description: DMA extended resource selector block + + interrupts: + maxItems: 17 + + interrupt-names: + items: + - const: error + - const: ch0 + - const: ch1 + - const: ch2 + - const: ch3 + - const: ch4 + - const: ch5 + - const: ch6 + - const: ch7 + - const: ch8 + - const: ch9 + - const: ch10 + - const: ch11 + - const: ch12 + - const: ch13 + - const: ch14 + - const: ch15 + + clocks: + items: + - description: DMA main clock + - description: DMA register access clock + + '#dma-cells': + const: 1 + description: + The cell specifies the encoded MID/RID values of the DMAC port + connected to the DMA client and the slave channel configuration + parameters. + bits[0:9] - Specifies MID/RID value + bit[10] - Specifies DMA request high enable (HIEN) + bit[11] - Specifies DMA request detection type (LVL) + bits[12:14] - Specifies DMAACK output mode (AM) + bit[15] - Specifies Transfer Mode (TM) + + dma-channels: + const: 16 + + power-domains: + maxItems: 1 + + resets: + items: + - description: Reset for DMA ARESETN reset terminal + - description: Reset for DMA RST_ASYNC reset terminal + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - '#dma-cells' + - dma-channels + - power-domains + - resets + +additionalProperties: false + +examples: + - | + #include + #include + + dmac: dma-controller@11820000 { + compatible = "renesas,r9a07g044-dmac", + "renesas,rz-dmac"; + reg = <0x11820000 0x10000>, + <0x11830000 0x10000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD R9A07G044_DMAC_ACLK>, + <&cpg CPG_MOD R9A07G044_DMAC_PCLK>; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_DMAC_ARESETN>, + <&cpg R9A07G044_DMAC_RST_ASYNC>; + #dma-cells = <1>; + dma-channels = <16>; + }; -- cgit v1.3-18-gd494 From 247141f5286b6a915dd225de076c29d8591e9a94 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 23 Jul 2021 17:47:41 -0700 Subject: dt-bindings: input: tsc2005: Convert to YAML schema Convert the TI TSC2004/TSC2005 DT bindings to YAML schema. Signed-off-by: Marek Vasut Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20210620210708.100147-1-marex@denx.de Signed-off-by: Dmitry Torokhov --- .../bindings/input/touchscreen/ti,tsc2005.yaml | 128 +++++++++++++++++++++ .../bindings/input/touchscreen/tsc2005.txt | 64 ----------- 2 files changed, 128 insertions(+), 64 deletions(-) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml new file mode 100644 index 000000000000..938aab016cc2 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml @@ -0,0 +1,128 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/ti,tsc2005.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TSC2004 and TSC2005 touchscreen controller bindings + +maintainers: + - Marek Vasut + - Michael Welling + +properties: + $nodename: + pattern: "^touchscreen(@.*)?$" + + compatible: + enum: + - ti,tsc2004 + - ti,tsc2005 + + reg: + maxItems: 1 + description: | + I2C address when used on the I2C bus, or the SPI chip select index + when used on the SPI bus + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO specifier for the controller reset line + + spi-max-frequency: + description: TSC2005 SPI bus clock frequency. + maximum: 25000000 + + ti,x-plate-ohms: + description: resistance of the touchscreen's X plates in ohm (defaults to 280) + + ti,esd-recovery-timeout-ms: + description: | + if the touchscreen does not respond after the configured time + (in milli seconds), the driver will reset it. This is disabled + by default. + + vio-supply: + description: Regulator specifier + + touchscreen-fuzz-pressure: true + touchscreen-fuzz-x: true + touchscreen-fuzz-y: true + touchscreen-max-pressure: true + touchscreen-size-x: true + touchscreen-size-y: true + +allOf: + - $ref: touchscreen.yaml# + - if: + properties: + compatible: + contains: + const: ti,tsc2004 + then: + properties: + spi-max-frequency: false + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@48 { + compatible = "ti,tsc2004"; + reg = <0x48>; + vio-supply = <&vio>; + + reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; + interrupts-extended = <&gpio1 27 IRQ_TYPE_EDGE_RISING>; + + touchscreen-fuzz-x = <4>; + touchscreen-fuzz-y = <7>; + touchscreen-fuzz-pressure = <2>; + touchscreen-size-x = <4096>; + touchscreen-size-y = <4096>; + touchscreen-max-pressure = <2048>; + + ti,x-plate-ohms = <280>; + ti,esd-recovery-timeout-ms = <8000>; + }; + }; + - | + #include + #include + spi { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@0 { + compatible = "ti,tsc2005"; + spi-max-frequency = <6000000>; + reg = <0>; + + vio-supply = <&vio>; + + reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */ + interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */ + + touchscreen-fuzz-x = <4>; + touchscreen-fuzz-y = <7>; + touchscreen-fuzz-pressure = <2>; + touchscreen-size-x = <4096>; + touchscreen-size-y = <4096>; + touchscreen-max-pressure = <2048>; + + ti,x-plate-ohms = <280>; + ti,esd-recovery-timeout-ms = <8000>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt deleted file mode 100644 index b80c04b0e5c0..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt +++ /dev/null @@ -1,64 +0,0 @@ -* Texas Instruments tsc2004 and tsc2005 touchscreen controllers - -Required properties: - - compatible : "ti,tsc2004" or "ti,tsc2005" - - reg : Device address - - interrupts : IRQ specifier - - spi-max-frequency : Maximum SPI clocking speed of the device - (for tsc2005) - -Optional properties: - - vio-supply : Regulator specifier - - reset-gpios : GPIO specifier for the controller reset line - - ti,x-plate-ohms : integer, resistance of the touchscreen's X plates - in ohm (defaults to 280) - - ti,esd-recovery-timeout-ms : integer, if the touchscreen does not respond after - the configured time (in milli seconds), the driver - will reset it. This is disabled by default. - - properties defined in touchscreen.txt - -Example: - -&i2c3 { - tsc2004@48 { - compatible = "ti,tsc2004"; - reg = <0x48>; - vio-supply = <&vio>; - - reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; - interrupts-extended = <&gpio1 27 IRQ_TYPE_EDGE_RISING>; - - touchscreen-fuzz-x = <4>; - touchscreen-fuzz-y = <7>; - touchscreen-fuzz-pressure = <2>; - touchscreen-size-x = <4096>; - touchscreen-size-y = <4096>; - touchscreen-max-pressure = <2048>; - - ti,x-plate-ohms = <280>; - ti,esd-recovery-timeout-ms = <8000>; - }; -} - -&mcspi1 { - tsc2005@0 { - compatible = "ti,tsc2005"; - spi-max-frequency = <6000000>; - reg = <0>; - - vio-supply = <&vio>; - - reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */ - interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */ - - touchscreen-fuzz-x = <4>; - touchscreen-fuzz-y = <7>; - touchscreen-fuzz-pressure = <2>; - touchscreen-size-x = <4096>; - touchscreen-size-y = <4096>; - touchscreen-max-pressure = <2048>; - - ti,x-plate-ohms = <280>; - ti,esd-recovery-timeout-ms = <8000>; - }; -} -- cgit v1.3-18-gd494 From 222039a2503e0839f859e18e6f09acb9997480d1 Mon Sep 17 00:00:00 2001 From: Trevor Wu Date: Tue, 31 Aug 2021 16:39:56 +0800 Subject: ASoC: dt-bindings: mt8195: remove dependent headers in the example Drop the use of the defines including clock and power id, so that we can remove the headers which are not applied in the example. Fixes: b5bac34fcfb4 ("dt-bindings: mediatek: mt8195: add audio afe document") Signed-off-by: Trevor Wu Acked-by: Rob Herring Link: https://lore.kernel.org/r/20210831083956.9804-1-trevor.wu@mediatek.com Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/mt8195-afe-pcm.yaml | 40 ++++++++++------------ 1 file changed, 19 insertions(+), 21 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml index 53e9434a6d9d..dcf790b053d2 100644 --- a/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml +++ b/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml @@ -130,36 +130,34 @@ additionalProperties: false examples: - | - #include #include #include - #include afe: mt8195-afe-pcm@10890000 { compatible = "mediatek,mt8195-audio"; reg = <0x10890000 0x10000>; interrupts = ; mediatek,topckgen = <&topckgen>; - power-domains = <&spm MT8195_POWER_DOMAIN_AUDIO>; + power-domains = <&spm 7>; //MT8195_POWER_DOMAIN_AUDIO clocks = <&clk26m>, - <&topckgen CLK_TOP_APLL1>, - <&topckgen CLK_TOP_APLL2>, - <&topckgen CLK_TOP_APLL12_DIV0>, - <&topckgen CLK_TOP_APLL12_DIV1>, - <&topckgen CLK_TOP_APLL12_DIV2>, - <&topckgen CLK_TOP_APLL12_DIV3>, - <&topckgen CLK_TOP_APLL12_DIV9>, - <&topckgen CLK_TOP_A1SYS_HP_SEL>, - <&topckgen CLK_TOP_AUD_INTBUS_SEL>, - <&topckgen CLK_TOP_AUDIO_H_SEL>, - <&topckgen CLK_TOP_AUDIO_LOCAL_BUS_SEL>, - <&topckgen CLK_TOP_DPTX_M_SEL>, - <&topckgen CLK_TOP_I2SO1_M_SEL>, - <&topckgen CLK_TOP_I2SO2_M_SEL>, - <&topckgen CLK_TOP_I2SI1_M_SEL>, - <&topckgen CLK_TOP_I2SI2_M_SEL>, - <&infracfg_ao CLK_INFRA_AO_AUDIO_26M_B>, - <&scp_adsp CLK_SCP_ADSP_AUDIODSP>; + <&topckgen 163>, //CLK_TOP_APLL1 + <&topckgen 166>, //CLK_TOP_APLL2 + <&topckgen 233>, //CLK_TOP_APLL12_DIV0 + <&topckgen 234>, //CLK_TOP_APLL12_DIV1 + <&topckgen 235>, //CLK_TOP_APLL12_DIV2 + <&topckgen 236>, //CLK_TOP_APLL12_DIV3 + <&topckgen 238>, //CLK_TOP_APLL12_DIV9 + <&topckgen 100>, //CLK_TOP_A1SYS_HP_SEL + <&topckgen 33>, //CLK_TOP_AUD_INTBUS_SEL + <&topckgen 34>, //CLK_TOP_AUDIO_H_SEL + <&topckgen 107>, //CLK_TOP_AUDIO_LOCAL_BUS_SEL + <&topckgen 98>, //CLK_TOP_DPTX_M_SEL + <&topckgen 94>, //CLK_TOP_I2SO1_M_SEL + <&topckgen 95>, //CLK_TOP_I2SO2_M_SEL + <&topckgen 96>, //CLK_TOP_I2SI1_M_SEL + <&topckgen 97>, //CLK_TOP_I2SI2_M_SEL + <&infracfg_ao 50>, //CLK_INFRA_AO_AUDIO_26M_B + <&scp_adsp 0>; //CLK_SCP_ADSP_AUDIODSP clock-names = "clk26m", "apll1_ck", "apll2_ck", -- cgit v1.3-18-gd494 From 4f89ff026ddbaab49dba993ad2dc757920d0ad49 Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Thu, 2 Sep 2021 11:32:05 +0800 Subject: ASoC: dt-bindings: fsl_rpmsg: Add compatible string for i.MX8ULP Add compatible string for i.MX8ULP platform which support audio function through rpmsg audio channel on M core. Signed-off-by: Shengjiu Wang Link: https://lore.kernel.org/r/1630553525-25655-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml index 61802a11baf4..d370c98a62c7 100644 --- a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml @@ -21,6 +21,7 @@ properties: - fsl,imx8mn-rpmsg-audio - fsl,imx8mm-rpmsg-audio - fsl,imx8mp-rpmsg-audio + - fsl,imx8ulp-rpmsg-audio model: $ref: /schemas/types.yaml#/definitions/string -- cgit v1.3-18-gd494 From dd8f6b299a2b86c4839de4a60a28ce2399453bc0 Mon Sep 17 00:00:00 2001 From: Liang Chen Date: Mon, 26 Jul 2021 11:03:54 +0200 Subject: dt-bindings: pwm: rockchip: Add description for rk3568 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add "rockchip,rk3568-pwm", "rockchip,rk3328-pwm" compatible strings for PWM nodes found on a rk3568 platform. Signed-off-by: Liang Chen Signed-off-by: Heiko Stuebner Acked-by: Uwe Kleine-König Acked-by: Rob Herring Signed-off-by: Thierry Reding --- Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml b/Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml index 5596bee70509..81a54a4e8e3e 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml +++ b/Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml @@ -29,6 +29,7 @@ properties: - enum: - rockchip,px30-pwm - rockchip,rk3308-pwm + - rockchip,rk3568-pwm - const: rockchip,rk3328-pwm reg: -- cgit v1.3-18-gd494 From ad93f7b3715449704225feb33d5fbe6507472245 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 27 Jul 2021 10:53:48 +0530 Subject: dt-bindings: virtio: Add binding for virtio devices Allow virtio device sub-nodes to be added to the virtio mmio or pci nodes. The compatible property for virtio device must be of the format "virtio,device", where ID is virtio device ID in hexadecimal format. Signed-off-by: Viresh Kumar Link: https://lore.kernel.org/r/d8319fd18df7086b12cdcc23193c313893aa071a.1627362340.git.viresh.kumar@linaro.org Signed-off-by: Michael S. Tsirkin Reviewed-by: Arnd Bergmann Reviewed-by: Rob Herring --- Documentation/devicetree/bindings/virtio/mmio.yaml | 3 +- .../devicetree/bindings/virtio/virtio-device.yaml | 41 ++++++++++++++++++++++ 2 files changed, 43 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/virtio/virtio-device.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/virtio/mmio.yaml b/Documentation/devicetree/bindings/virtio/mmio.yaml index d46597028cf1..4b7a0273181c 100644 --- a/Documentation/devicetree/bindings/virtio/mmio.yaml +++ b/Documentation/devicetree/bindings/virtio/mmio.yaml @@ -36,7 +36,8 @@ required: - reg - interrupts -additionalProperties: false +additionalProperties: + type: object examples: - | diff --git a/Documentation/devicetree/bindings/virtio/virtio-device.yaml b/Documentation/devicetree/bindings/virtio/virtio-device.yaml new file mode 100644 index 000000000000..1778ea9b5aa5 --- /dev/null +++ b/Documentation/devicetree/bindings/virtio/virtio-device.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/virtio/virtio-device.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Virtio device bindings + +maintainers: + - Viresh Kumar + +description: + These bindings are applicable to virtio devices irrespective of the bus they + are bound to, like mmio or pci. + +# We need a select here so we don't match all nodes with 'virtio,mmio' +properties: + compatible: + pattern: "^virtio,device[0-9a-f]{1,8}$" + description: Virtio device nodes. + "virtio,deviceID", where ID is the virtio device id. The textual + representation of ID shall be in lower case hexadecimal with leading + zeroes suppressed. + +required: + - compatible + +additionalProperties: true + +examples: + - | + virtio@3000 { + compatible = "virtio,mmio"; + reg = <0x3000 0x100>; + interrupts = <43>; + + i2c { + compatible = "virtio,device22"; + }; + }; +... -- cgit v1.3-18-gd494 From 7f815fce08d563006e43d1b7d2f9a0a4f3b832f3 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 27 Jul 2021 10:53:49 +0530 Subject: dt-bindings: i2c: Add bindings for i2c-virtio This patch adds binding for virtio I2C device, it is based on virtio-device bindings. Acked-by: Wolfram Sang Reviewed-by: Arnd Bergmann Signed-off-by: Viresh Kumar Link: https://lore.kernel.org/r/33c317b95097ce491845c697db1e8285e3ec1d41.1627362340.git.viresh.kumar@linaro.org Signed-off-by: Michael S. Tsirkin Reviewed-by: Rob Herring --- .../devicetree/bindings/i2c/i2c-virtio.yaml | 51 ++++++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-virtio.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/i2c/i2c-virtio.yaml b/Documentation/devicetree/bindings/i2c/i2c-virtio.yaml new file mode 100644 index 000000000000..7d87ed855301 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-virtio.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-virtio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Virtio I2C Adapter + +maintainers: + - Viresh Kumar + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + - $ref: /schemas/virtio/virtio-device.yaml# + +description: + Virtio I2C device, see /schemas/virtio/virtio-device.yaml for more details. + +properties: + $nodename: + const: i2c + + compatible: + const: virtio,device22 + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + virtio@3000 { + compatible = "virtio,mmio"; + reg = <0x3000 0x100>; + interrupts = <41>; + + i2c { + compatible = "virtio,device22"; + + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@20 { + compatible = "dynaimage,al3320a"; + reg = <0x20>; + }; + }; + }; + +... -- cgit v1.3-18-gd494 From f3a66dcdf2390f8434622a4e20a1af7413502623 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 27 Jul 2021 10:53:50 +0530 Subject: dt-bindings: gpio: Add bindings for gpio-virtio This patch adds binding for virtio GPIO controller, it is based on virtio-device bindings. Reviewed-by: Arnd Bergmann Signed-off-by: Viresh Kumar Link: https://lore.kernel.org/r/acf7402ef4aabc0ad6295c32846f2bef1cd9b56a.1627362340.git.viresh.kumar@linaro.org Signed-off-by: Michael S. Tsirkin Reviewed-by: Rob Herring --- .../devicetree/bindings/gpio/gpio-virtio.yaml | 59 ++++++++++++++++++++++ 1 file changed, 59 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-virtio.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/gpio/gpio-virtio.yaml b/Documentation/devicetree/bindings/gpio/gpio-virtio.yaml new file mode 100644 index 000000000000..601d85754577 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-virtio.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/gpio-virtio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Virtio GPIO controller + +maintainers: + - Viresh Kumar + +allOf: + - $ref: /schemas/virtio/virtio-device.yaml# + +description: + Virtio GPIO controller, see /schemas/virtio/virtio-device.yaml for more + details. + +properties: + $nodename: + const: gpio + + compatible: + const: virtio,device29 + + gpio-controller: true + + "#gpio-cells": + const: 2 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + +required: + - compatible + - gpio-controller + - "#gpio-cells" + +unevaluatedProperties: false + +examples: + - | + virtio@3000 { + compatible = "virtio,mmio"; + reg = <0x3000 0x100>; + interrupts = <41>; + + gpio { + compatible = "virtio,device29"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + +... -- cgit v1.3-18-gd494 From a8bbe0c9440561cb407cefc0b1def808c2c38431 Mon Sep 17 00:00:00 2001 From: "Hector.Yuan" Date: Fri, 3 Sep 2021 16:39:22 +0800 Subject: dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW Add devicetree bindings for MediaTek HW driver. Signed-off-by: Hector.Yuan Reviewed-by: Rob Herring Signed-off-by: Viresh Kumar --- .../bindings/cpufreq/cpufreq-mediatek-hw.yaml | 70 ++++++++++++++++++++++ 1 file changed, 70 insertions(+) create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml new file mode 100644 index 000000000000..9cd42a64b13e --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/cpufreq/cpufreq-mediatek-hw.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek's CPUFREQ Bindings + +maintainers: + - Hector Yuan + +description: + CPUFREQ HW is a hardware engine used by MediaTek SoCs to + manage frequency in hardware. It is capable of controlling + frequency for multiple clusters. + +properties: + compatible: + const: mediatek,cpufreq-hw + + reg: + minItems: 1 + maxItems: 2 + description: + Addresses and sizes for the memory of the HW bases in + each frequency domain. Each entry corresponds to + a register bank for each frequency domain present. + + "#performance-domain-cells": + description: + Number of cells in a performance domain specifier. + Set const to 1 here for nodes providing multiple + performance domains. + const: 1 + +required: + - compatible + - reg + - "#performance-domain-cells" + +additionalProperties: false + +examples: + - | + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + enable-method = "psci"; + performance-domains = <&performance 0>; + reg = <0x000>; + }; + }; + + /* ... */ + + soc { + #address-cells = <2>; + #size-cells = <2>; + + performance: performance-controller@11bc00 { + compatible = "mediatek,cpufreq-hw"; + reg = <0 0x0011bc10 0 0x120>, <0 0x0011bd30 0 0x120>; + + #performance-domain-cells = <1>; + }; + }; -- cgit v1.3-18-gd494 From 0f31ab217dc52a3044044d416be0248b1778c4da Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Tue, 7 Sep 2021 22:02:40 -0500 Subject: dt-bindings: net: sun8i-emac: Add compatible for D1 The D1 SoC contains EMAC hardware which is compatible with the A64 EMAC. Add the new compatible string, with the A64 as a fallback. Signed-off-by: Samuel Holland Acked-by: Maxime Ripard Signed-off-by: David S. Miller --- Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml index 7f2578d48e3f..9eb4bb529ad5 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml @@ -19,7 +19,9 @@ properties: - const: allwinner,sun8i-v3s-emac - const: allwinner,sun50i-a64-emac - items: - - const: allwinner,sun50i-h6-emac + - enum: + - allwinner,sun20i-d1-emac + - allwinner,sun50i-h6-emac - const: allwinner,sun50i-a64-emac reg: -- cgit v1.3-18-gd494 From 975671241808ffacbe418a1f29965bd9985cc251 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Fri, 10 Sep 2021 11:51:53 -0500 Subject: dt-bindings: More use 'enum' instead of 'oneOf' plus 'const' entries 'enum' is equivalent to 'oneOf' with a list of 'const' entries, but 'enum' is more concise and yields better error messages. Fix a couple more cases which have appeared. Cc: Rob Clark Cc: Sean Paul Cc: Mark Brown Cc: Wim Van Sebroeck Cc: Guenter Roeck Cc: Jonathan Marek Cc: Aswath Govindraju Cc: Marc Zyngier Cc: Linus Walleij Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Cc: linux-spi@vger.kernel.org Cc: linux-watchdog@vger.kernel.org Signed-off-by: Rob Herring Acked-by: Guenter Roeck Acked-by: Mark Brown Link: https://lore.kernel.org/r/20210910165153.2843871-1-robh@kernel.org --- .../devicetree/bindings/display/msm/dsi-phy-7nm.yaml | 8 ++++---- Documentation/devicetree/bindings/spi/omap-spi.yaml | 6 +++--- .../devicetree/bindings/watchdog/maxim,max63xx.yaml | 14 +++++++------- 3 files changed, 14 insertions(+), 14 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml index 4265399bb154..c851770bbdf2 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml @@ -14,10 +14,10 @@ allOf: properties: compatible: - oneOf: - - const: qcom,dsi-phy-7nm - - const: qcom,dsi-phy-7nm-8150 - - const: qcom,sc7280-dsi-phy-7nm + enum: + - qcom,dsi-phy-7nm + - qcom,dsi-phy-7nm-8150 + - qcom,sc7280-dsi-phy-7nm reg: items: diff --git a/Documentation/devicetree/bindings/spi/omap-spi.yaml b/Documentation/devicetree/bindings/spi/omap-spi.yaml index e55538186cf6..9952199cae11 100644 --- a/Documentation/devicetree/bindings/spi/omap-spi.yaml +++ b/Documentation/devicetree/bindings/spi/omap-spi.yaml @@ -84,9 +84,9 @@ unevaluatedProperties: false if: properties: compatible: - oneOf: - - const: ti,omap2-mcspi - - const: ti,omap4-mcspi + enum: + - ti,omap2-mcspi + - ti,omap4-mcspi then: properties: diff --git a/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml b/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml index f2105eedac2c..ab9641e845db 100644 --- a/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml +++ b/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml @@ -15,13 +15,13 @@ maintainers: properties: compatible: - oneOf: - - const: maxim,max6369 - - const: maxim,max6370 - - const: maxim,max6371 - - const: maxim,max6372 - - const: maxim,max6373 - - const: maxim,max6374 + enum: + - maxim,max6369 + - maxim,max6370 + - maxim,max6371 + - maxim,max6372 + - maxim,max6373 + - maxim,max6374 reg: description: This is a 1-byte memory-mapped address -- cgit v1.3-18-gd494 From 094b147c766289baa0f370d124609c3ac2b5a420 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Fri, 10 Sep 2021 11:59:45 -0500 Subject: spi: dt-bindings: xilinx: Drop type reference on *-bits properties Properties with standard unit suffixes such as '-bits' don't need a type. Cc: Mark Brown Cc: Michal Simek Cc: linux-spi@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Rob Herring Acked-by: Mark Brown Link: https://lore.kernel.org/r/20210910165945.2852999-1-robh@kernel.org --- Documentation/devicetree/bindings/spi/spi-xilinx.yaml | 2 -- 1 file changed, 2 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.yaml b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml index 593f7693bace..03e5dca7e933 100644 --- a/Documentation/devicetree/bindings/spi/spi-xilinx.yaml +++ b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml @@ -27,13 +27,11 @@ properties: xlnx,num-ss-bits: description: Number of chip selects used. - $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1 maximum: 32 xlnx,num-transfer-bits: description: Number of bits per transfer. This will be 8 if not specified. - $ref: /schemas/types.yaml#/definitions/uint32 enum: [8, 16, 32] default: 8 -- cgit v1.3-18-gd494