From a56609c4c3f34de76d905e39160511b3c53310ac Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 30 Mar 2017 15:45:53 +0900 Subject: mtd: nand: denali_dt: enable HW_ECC_FIXUP for Altera SOCFPGA variant There are various customizable parameters, so several variants for this IP. A generic compatible like "denali,denali-nand-dt" is useless. Moreover, there are multiple things wrong with this string. (Refer to Rob's comment [1]) The "denali,denali-nand-dt" was added by Altera for the SOCFPGA port. Replace it with a more specific string "altr,socfpga-denali-nand". There are no users (in upstream) of the old compatible string. The Denali IP on SOCFPGA incorporates the hardware ECC fixup engine. So, this capability should be associated with the compatible. [1] https://lkml.org/lkml/2016/12/1/450 Signed-off-by: Masahiro Yamada Acked-by: Rob Herring Signed-off-by: Boris Brezillon --- Documentation/devicetree/bindings/mtd/denali-nand.txt | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt index b04d03a1d499..6f4ab4c9bebc 100644 --- a/Documentation/devicetree/bindings/mtd/denali-nand.txt +++ b/Documentation/devicetree/bindings/mtd/denali-nand.txt @@ -1,7 +1,8 @@ * Denali NAND controller Required properties: - - compatible : should be "denali,denali-nand-dt" + - compatible : should be one of the following: + "altr,socfpga-denali-nand" - for Altera SOCFPGA - reg : should contain registers location and length for data and reg. - reg-names: Should contain the reg names "nand_data" and "denali_reg" - interrupts : The interrupt number. @@ -15,7 +16,7 @@ Examples: nand: nand@ff900000 { #address-cells = <1>; #size-cells = <1>; - compatible = "denali,denali-nand-dt"; + compatible = "altr,socfpga-denali-nand"; reg = <0xff900000 0x100000>, <0xffb80000 0x10000>; reg-names = "nand_data", "denali_reg"; interrupts = <0 144 4>; -- cgit v1.2.3-59-g8ed1b