From 21cdb025fc6930f240af48a491e8c763be7900f2 Mon Sep 17 00:00:00 2001 From: Marco Felsch Date: Thu, 9 Jan 2020 17:04:13 -0800 Subject: Input: edt-ft5x06 - document wakeup-source capability The current driver behaviour was to enable the wakeup-source everytime. After discussion [1] we decided to change that behaviour so the device will act as wakeup-source only if the "wakeup-source" dt-property is present. The patch adds the binding documentation to enable the wakeup-source capability. [1] https://patchwork.kernel.org/patch/11149037/ Signed-off-by: Marco Felsch Tested-by: Andy Shevchenko Reviewed-by: Andy Shevchenko Reviewed-by: Rob Herring Signed-off-by: Dmitry Torokhov --- Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt index 0f6950073d6f..0e57315e9cbd 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt @@ -36,6 +36,8 @@ Optional properties: - pinctrl-0: a phandle pointing to the pin settings for the control gpios + - wakeup-source: If present the device will act as wakeup-source + - threshold: allows setting the "click"-threshold in the range from 0 to 80. -- cgit v1.2.3-59-g8ed1b From 1d6204e2f51fcef7dd174e7703294fa0abbc0740 Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Mon, 27 Jan 2020 14:06:32 -0800 Subject: dt-bindings: touchscreen: Add touchscreen schema Add touchscreen schema for common properties Signed-off-by: Benjamin Gaignard Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20200108091118.5130-2-benjamin.gaignard@st.com Signed-off-by: Dmitry Torokhov --- .../bindings/input/touchscreen/touchscreen.txt | 40 +---------- .../bindings/input/touchscreen/touchscreen.yaml | 83 ++++++++++++++++++++++ 2 files changed, 84 insertions(+), 39 deletions(-) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt index 8641a2d70851..e1adb902d503 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt @@ -1,39 +1 @@ -General Touchscreen Properties: - -Optional properties for Touchscreens: - - touchscreen-min-x : minimum x coordinate reported (0 if not set) - - touchscreen-min-y : minimum y coordinate reported (0 if not set) - - touchscreen-size-x : horizontal resolution of touchscreen - (maximum x coordinate reported + 1) - - touchscreen-size-y : vertical resolution of touchscreen - (maximum y coordinate reported + 1) - - touchscreen-max-pressure : maximum reported pressure (arbitrary range - dependent on the controller) - - touchscreen-min-pressure : minimum pressure on the touchscreen to be - achieved in order for the touchscreen - driver to report a touch event. - - touchscreen-fuzz-x : horizontal noise value of the absolute input - device (in pixels) - - touchscreen-fuzz-y : vertical noise value of the absolute input - device (in pixels) - - touchscreen-fuzz-pressure : pressure noise value of the absolute input - device (arbitrary range dependent on the - controller) - - touchscreen-average-samples : Number of data samples which are averaged - for each read (valid values dependent on the - controller) - - touchscreen-inverted-x : X axis is inverted (boolean) - - touchscreen-inverted-y : Y axis is inverted (boolean) - - touchscreen-swapped-x-y : X and Y axis are swapped (boolean) - Swapping is done after inverting the axis - - touchscreen-x-mm : horizontal length in mm of the touchscreen - - touchscreen-y-mm : vertical length in mm of the touchscreen - -Deprecated properties for Touchscreens: - - x-size : deprecated name for touchscreen-size-x - - y-size : deprecated name for touchscreen-size-y - - moving-threshold : deprecated name for a combination of - touchscreen-fuzz-x and touchscreen-fuzz-y - - contact-threshold : deprecated name for touchscreen-fuzz-pressure - - x-invert : deprecated name for touchscreen-inverted-x - - y-invert : deprecated name for touchscreen-inverted-y +See touchscreen.yaml diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml new file mode 100644 index 000000000000..d7dac16a3960 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/touchscreen.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common touchscreen Bindings + +maintainers: + - Dmitry Torokhov + +properties: + touchscreen-min-x: + description: minimum x coordinate reported + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + touchscreen-min-y: + description: minimum y coordinate reported + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + touchscreen-size-x: + description: horizontal resolution of touchscreen (maximum x coordinate reported + 1) + $ref: /schemas/types.yaml#/definitions/uint32 + + touchscreen-size-y: + description: vertical resolution of touchscreen (maximum y coordinate reported + 1) + $ref: /schemas/types.yaml#/definitions/uint32 + + touchscreen-max-pressure: + description: maximum reported pressure (arbitrary range dependent on the controller) + $ref: /schemas/types.yaml#/definitions/uint32 + + touchscreen-min-pressure: + description: minimum pressure on the touchscreen to be achieved in order for the + touchscreen driver to report a touch event. + $ref: /schemas/types.yaml#/definitions/uint32 + + touchscreen-fuzz-x: + description: horizontal noise value of the absolute input device (in pixels) + $ref: /schemas/types.yaml#/definitions/uint32 + + touchscreen-fuzz-y: + description: vertical noise value of the absolute input device (in pixels) + $ref: /schemas/types.yaml#/definitions/uint32 + + touchscreen-fuzz-pressure: + description: pressure noise value of the absolute input device (arbitrary range + dependent on the controller) + $ref: /schemas/types.yaml#/definitions/uint32 + + touchscreen-average-samples: + description: Number of data samples which are averaged for each read (valid values + dependent on the controller) + $ref: /schemas/types.yaml#/definitions/uint32 + + touchscreen-inverted-x: + description: X axis is inverted + type: boolean + + touchscreen-inverted-y: + description: Y axis is inverted + type: boolean + + touchscreen-swapped-x-y: + description: X and Y axis are swapped + Swapping is done after inverting the axis + type: boolean + + touchscreen-x-mm: + description: horizontal length in mm of the touchscreen + $ref: /schemas/types.yaml#/definitions/uint32 + + touchscreen-y-mm: + description: vertical length in mm of the touchscreen + $ref: /schemas/types.yaml#/definitions/uint32 + +dependencies: + touchscreen-size-x: [ touchscreen-size-y ] + touchscreen-size-y: [ touchscreen-size-x ] + touchscreen-x-mm: [ touchscreen-y-mm ] + touchscreen-y-mm: [ touchscreen-x-mm ] -- cgit v1.2.3-59-g8ed1b From f61023dfb6d489cc4dfa235d3f02a9feb6f1ec7e Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Mon, 27 Jan 2020 14:07:04 -0800 Subject: dt-bindings: touchscreen: Convert Goodix touchscreen to json-schema Convert the Goodix binding to DT schema format using json-schema Signed-off-by: Benjamin Gaignard Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20200108091118.5130-3-benjamin.gaignard@st.com Signed-off-by: Dmitry Torokhov --- .../bindings/input/touchscreen/goodix.txt | 50 -------------- .../bindings/input/touchscreen/goodix.yaml | 78 ++++++++++++++++++++++ 2 files changed, 78 insertions(+), 50 deletions(-) delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/goodix.txt create mode 100644 Documentation/devicetree/bindings/input/touchscreen/goodix.yaml (limited to 'Documentation/devicetree') diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt deleted file mode 100644 index fc03ea4cf5ab..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt +++ /dev/null @@ -1,50 +0,0 @@ -Device tree bindings for Goodix GT9xx series touchscreen controller - -Required properties: - - - compatible : Should be "goodix,gt1151" - or "goodix,gt5663" - or "goodix,gt5688" - or "goodix,gt911" - or "goodix,gt9110" - or "goodix,gt912" - or "goodix,gt927" - or "goodix,gt9271" - or "goodix,gt928" - or "goodix,gt967" - - reg : I2C address of the chip. Should be 0x5d or 0x14 - - interrupts : Interrupt to which the chip is connected - -Optional properties: - - - irq-gpios : GPIO pin used for IRQ. The driver uses the - interrupt gpio pin as output to reset the device. - - reset-gpios : GPIO pin used for reset - - AVDD28-supply : Analog power supply regulator on AVDD28 pin - - VDDIO-supply : GPIO power supply regulator on VDDIO pin - - touchscreen-inverted-x - - touchscreen-inverted-y - - touchscreen-size-x - - touchscreen-size-y - - touchscreen-swapped-x-y - -The touchscreen-* properties are documented in touchscreen.txt in this -directory. - -Example: - - i2c@00000000 { - /* ... */ - - gt928@5d { - compatible = "goodix,gt928"; - reg = <0x5d>; - interrupt-parent = <&gpio>; - interrupts = <0 0>; - - irq-gpios = <&gpio1 0 0>; - reset-gpios = <&gpio1 1 0>; - }; - - /* ... */ - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml new file mode 100644 index 000000000000..d7c3262b2494 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/goodix.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Goodix GT9xx series touchscreen controller Bindings + +maintainers: + - Dmitry Torokhov + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - goodix,gt1151 + - goodix,gt5663 + - goodix,gt5688 + - goodix,gt911 + - goodix,gt9110 + - goodix,gt912 + - goodix,gt927 + - goodix,gt9271 + - goodix,gt928 + - goodix,gt967 + + reg: + enum: [ 0x5d, 0x14 ] + + interrupts: + maxItems: 1 + + irq-gpios: + description: GPIO pin used for IRQ. + The driver uses the interrupt gpio pin as + output to reset the device. + maxItems: 1 + + reset-gpios: + maxItems: 1 + + AVDD28-supply: + description: Analog power supply regulator on AVDD28 pin + + VDDIO-supply: + description: GPIO power supply regulator on VDDIO pin + + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-swapped-x-y: true + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: +- | + i2c@00000000 { + #address-cells = <1>; + #size-cells = <0>; + gt928@5d { + compatible = "goodix,gt928"; + reg = <0x5d>; + interrupt-parent = <&gpio>; + interrupts = <0 0>; + irq-gpios = <&gpio1 0 0>; + reset-gpios = <&gpio1 1 0>; + }; + }; + +... -- cgit v1.2.3-59-g8ed1b