From 2c9d5b5e32a2516ae9b1120c7688ea25ffee7805 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 1 Jul 2019 11:12:38 -0700 Subject: hwmon: Remove ads1015 driver A driver for ADS1015 with more functionality is available in the iio subsystem. Remove the hwmon driver as duplicate. If the chip is used for hardware monitoring, the iio->hwmon bridge should be used. Cc: Dirk Eibach Link: https://lore.kernel.org/r/1562004758-13025-1-git-send-email-linux@roeck-us.net Acked-by: Jonathan Cameron Acked-by: Rob Herring Signed-off-by: Guenter Roeck --- Documentation/hwmon/ads1015.rst | 90 ----------------------------------------- Documentation/hwmon/index.rst | 1 - 2 files changed, 91 deletions(-) delete mode 100644 Documentation/hwmon/ads1015.rst (limited to 'Documentation/hwmon') diff --git a/Documentation/hwmon/ads1015.rst b/Documentation/hwmon/ads1015.rst deleted file mode 100644 index e0951c4e57bb..000000000000 --- a/Documentation/hwmon/ads1015.rst +++ /dev/null @@ -1,90 +0,0 @@ -Kernel driver ads1015 -===================== - -Supported chips: - - * Texas Instruments ADS1015 - - Prefix: 'ads1015' - - Datasheet: Publicly available at the Texas Instruments website: - - http://focus.ti.com/lit/ds/symlink/ads1015.pdf - - * Texas Instruments ADS1115 - - Prefix: 'ads1115' - - Datasheet: Publicly available at the Texas Instruments website: - - http://focus.ti.com/lit/ds/symlink/ads1115.pdf - -Authors: - Dirk Eibach, Guntermann & Drunck GmbH - -Description ------------ - -This driver implements support for the Texas Instruments ADS1015/ADS1115. - -This device is a 12/16-bit A-D converter with 4 inputs. - -The inputs can be used single ended or in certain differential combinations. - -The inputs can be made available by 8 sysfs input files in0_input - in7_input: - - - in0: Voltage over AIN0 and AIN1. - - in1: Voltage over AIN0 and AIN3. - - in2: Voltage over AIN1 and AIN3. - - in3: Voltage over AIN2 and AIN3. - - in4: Voltage over AIN0 and GND. - - in5: Voltage over AIN1 and GND. - - in6: Voltage over AIN2 and GND. - - in7: Voltage over AIN3 and GND. - -Which inputs are available can be configured using platform data or devicetree. - -By default all inputs are exported. - -Platform Data -------------- - -In linux/platform_data/ads1015.h platform data is defined, channel_data contains -configuration data for the used input combinations: - -- pga is the programmable gain amplifier (values are full scale) - - - 0: +/- 6.144 V - - 1: +/- 4.096 V - - 2: +/- 2.048 V - - 3: +/- 1.024 V - - 4: +/- 0.512 V - - 5: +/- 0.256 V - -- data_rate in samples per second - - - 0: 128 - - 1: 250 - - 2: 490 - - 3: 920 - - 4: 1600 - - 5: 2400 - - 6: 3300 - -Example:: - - struct ads1015_platform_data data = { - .channel_data = { - [2] = { .enabled = true, .pga = 1, .data_rate = 0 }, - [4] = { .enabled = true, .pga = 4, .data_rate = 5 }, - } - }; - -In this case only in2_input (FS +/- 4.096 V, 128 SPS) and in4_input -(FS +/- 0.512 V, 2400 SPS) would be created. - -Devicetree ----------- - -Configuration is also possible via devicetree: -Documentation/devicetree/bindings/hwmon/ads1015.txt diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index ee090e51653a..1d301d0e6f4d 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -30,7 +30,6 @@ Hardware Monitoring Kernel Drivers adm1031 adm1275 adm9240 - ads1015 ads7828 adt7410 adt7411 -- cgit v1.2.3-59-g8ed1b