From 9a985cdc5ccb0d557720221d01bd70c19f04bb8c Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Fri, 28 Mar 2014 18:58:26 +0100 Subject: doc: filter: extend BPF documentation to document new internals Further extend the current BPF documentation to document new BPF engine internals. Joint work with Daniel Borkmann. Signed-off-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann Signed-off-by: David S. Miller --- Documentation/networking/filter.txt | 125 ++++++++++++++++++++++++++++++++++++ 1 file changed, 125 insertions(+) (limited to 'Documentation/networking/filter.txt') diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt index a06b48d2f5cc..81f940f4e884 100644 --- a/Documentation/networking/filter.txt +++ b/Documentation/networking/filter.txt @@ -546,6 +546,130 @@ ffffffffa0069c8f + : For BPF JIT developers, bpf_jit_disasm, bpf_asm and bpf_dbg provides a useful toolchain for developing and testing the kernel's JIT compiler. +BPF kernel internals +-------------------- +Internally, for the kernel interpreter, a different BPF instruction set +format with similar underlying principles from BPF described in previous +paragraphs is being used. However, the instruction set format is modelled +closer to the underlying architecture to mimic native instruction sets, so +that a better performance can be achieved (more details later). + +It is designed to be JITed with one to one mapping, which can also open up +the possibility for GCC/LLVM compilers to generate optimized BPF code through +a BPF backend that performs almost as fast as natively compiled code. + +The new instruction set was originally designed with the possible goal in +mind to write programs in "restricted C" and compile into BPF with a optional +GCC/LLVM backend, so that it can just-in-time map to modern 64-bit CPUs with +minimal performance overhead over two steps, that is, C -> BPF -> native code. + +Currently, the new format is being used for running user BPF programs, which +includes seccomp BPF, classic socket filters, cls_bpf traffic classifier, +team driver's classifier for its load-balancing mode, netfilter's xt_bpf +extension, PTP dissector/classifier, and much more. They are all internally +converted by the kernel into the new instruction set representation and run +in the extended interpreter. For in-kernel handlers, this all works +transparently by using sk_unattached_filter_create() for setting up the +filter, resp. sk_unattached_filter_destroy() for destroying it. The macro +SK_RUN_FILTER(filter, ctx) transparently invokes the right BPF function to +run the filter. 'filter' is a pointer to struct sk_filter that we got from +sk_unattached_filter_create(), and 'ctx' the given context (e.g. skb pointer). +All constraints and restrictions from sk_chk_filter() apply before a +conversion to the new layout is being done behind the scenes! + +Currently, for JITing, the user BPF format is being used and current BPF JIT +compilers reused whenever possible. In other words, we do not (yet!) perform +a JIT compilation in the new layout, however, future work will successively +migrate traditional JIT compilers into the new instruction format as well, so +that they will profit from the very same benefits. Thus, when speaking about +JIT in the following, a JIT compiler (TBD) for the new instruction format is +meant in this context. + +Some core changes of the new internal format: + +- Number of registers increase from 2 to 10: + + The old format had two registers A and X, and a hidden frame pointer. The + new layout extends this to be 10 internal registers and a read-only frame + pointer. Since 64-bit CPUs are passing arguments to functions via registers + the number of args from BPF program to in-kernel function is restricted + to 5 and one register is used to accept return value from an in-kernel + function. Natively, x86_64 passes first 6 arguments in registers, aarch64/ + sparcv9/mips64 have 7 - 8 registers for arguments; x86_64 has 6 callee saved + registers, and aarch64/sparcv9/mips64 have 11 or more callee saved registers. + + Therefore, BPF calling convention is defined as: + + * R0 - return value from in-kernel function + * R1 - R5 - arguments from BPF program to in-kernel function + * R6 - R9 - callee saved registers that in-kernel function will preserve + * R10 - read-only frame pointer to access stack + + Thus, all BPF registers map one to one to HW registers on x86_64, aarch64, + etc, and BPF calling convention maps directly to ABIs used by the kernel on + 64-bit architectures. + + On 32-bit architectures JIT may map programs that use only 32-bit arithmetic + and may let more complex programs to be interpreted. + + R0 - R5 are scratch registers and BPF program needs spill/fill them if + necessary across calls. Note that there is only one BPF program (== one BPF + main routine) and it cannot call other BPF functions, it can only call + predefined in-kernel functions, though. + +- Register width increases from 32-bit to 64-bit: + + Still, the semantics of the original 32-bit ALU operations are preserved + via 32-bit subregisters. All BPF registers are 64-bit with 32-bit lower + subregisters that zero-extend into 64-bit if they are being written to. + That behavior maps directly to x86_64 and arm64 subregister definition, but + makes other JITs more difficult. + + 32-bit architectures run 64-bit internal BPF programs via interpreter. + Their JITs may convert BPF programs that only use 32-bit subregisters into + native instruction set and let the rest being interpreted. + + Operation is 64-bit, because on 64-bit architectures, pointers are also + 64-bit wide, and we want to pass 64-bit values in/out of kernel functions, + so 32-bit BPF registers would otherwise require to define register-pair + ABI, thus, there won't be able to use a direct BPF register to HW register + mapping and JIT would need to do combine/split/move operations for every + register in and out of the function, which is complex, bug prone and slow. + Another reason is the use of atomic 64-bit counters. + +- Conditional jt/jf targets replaced with jt/fall-through: + + While the original design has constructs such as "if (cond) jump_true; + else jump_false;", they are being replaced into alternative constructs like + "if (cond) jump_true; /* else fall-through */". + +- Introduces bpf_call insn and register passing convention for zero overhead + calls from/to other kernel functions: + + After a kernel function call, R1 - R5 are reset to unreadable and R0 has a + return type of the function. Since R6 - R9 are callee saved, their state is + preserved across the call. + +Also in the new design, BPF is limited to 4096 insns, which means that any +program will terminate quickly and will only call a fixed number of kernel +functions. Original BPF and the new format are two operand instructions, +which helps to do one-to-one mapping between BPF insn and x86 insn during JIT. + +The input context pointer for invoking the interpreter function is generic, +its content is defined by a specific use case. For seccomp register R1 points +to seccomp_data, for converted BPF filters R1 points to a skb. + +A program, that is translated internally consists of the following elements: + + op:16, jt:8, jf:8, k:32 ==> op:8, a_reg:4, x_reg:4, off:16, imm:32 + +Just like the original BPF, the new format runs within a controlled environment, +is deterministic and the kernel can easily prove that. The safety of the program +can be determined in two steps: first step does depth-first-search to disallow +loops and other CFG validation; second step starts from the first insn and +descends all possible paths. It simulates execution of every insn and observes +the state change of registers and stack. + Misc ---- @@ -561,3 +685,4 @@ the underlying architecture. Jay Schulist Daniel Borkmann +Alexei Starovoitov -- cgit v1.2.3-59-g8ed1b