From 98766fbe604bc198ced93c57220c2d4a78ad6c11 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 21 Nov 2005 21:32:31 -0800 Subject: [PATCH] kernel Doc/ URL corrections Correct lots of URLs in Documentation/ Also a few minor whitespace cleanups and typo/spello fixes. Sadly there are still a lot of bad URLs remaining. Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/networking/driver.txt | 5 +---- Documentation/networking/iphase.txt | 2 +- Documentation/networking/irda.txt | 8 ++------ Documentation/networking/ray_cs.txt | 3 +-- Documentation/networking/vortex.txt | 28 ++++++++++++++-------------- 5 files changed, 19 insertions(+), 27 deletions(-) (limited to 'Documentation/networking') diff --git a/Documentation/networking/driver.txt b/Documentation/networking/driver.txt index 11fd0ef5ff57..a9ad58b49cc5 100644 --- a/Documentation/networking/driver.txt +++ b/Documentation/networking/driver.txt @@ -1,7 +1,4 @@ -Documents about softnet driver issues in general can be found -at: - - http://www.firstfloor.org/~andi/softnet/ +Document about softnet driver issues Transmit path guidelines: diff --git a/Documentation/networking/iphase.txt b/Documentation/networking/iphase.txt index 39ccb8595bf1..493203a080a8 100644 --- a/Documentation/networking/iphase.txt +++ b/Documentation/networking/iphase.txt @@ -22,7 +22,7 @@ The features and limitations of this driver are as follows: - All variants of Interphase ATM PCI (i)Chip adapter cards are supported, including x575 (OC3, control memory 128K , 512K and packet memory 128K, 512K and 1M), x525 (UTP25) and x531 (DS3 and E3). See - http://www.iphase.com/products/ClassSheet.cfm?ClassID=ATM + http://www.iphase.com/site/iphase-web/?epi_menuItemID=e196f04b4b3b40502f150882e21046a0 for details. - Only x86 platforms are supported. - SMP is supported. diff --git a/Documentation/networking/irda.txt b/Documentation/networking/irda.txt index 9e5b8e66d6a5..bff26c138be6 100644 --- a/Documentation/networking/irda.txt +++ b/Documentation/networking/irda.txt @@ -3,12 +3,8 @@ of the IrDA Utilities. More detailed information about these and associated programs can be found on http://irda.sourceforge.net/ For more information about how to use the IrDA protocol stack, see the -Linux Infared HOWTO (http://www.tuxmobil.org/Infrared-HOWTO/Infrared-HOWTO.html) -by Werner Heuser +Linux Infrared HOWTO by Werner Heuser : + There is an active mailing list for discussing Linux-IrDA matters called irda-users@lists.sourceforge.net - - - - diff --git a/Documentation/networking/ray_cs.txt b/Documentation/networking/ray_cs.txt index b1def00bc4a3..5427f8c7df95 100644 --- a/Documentation/networking/ray_cs.txt +++ b/Documentation/networking/ray_cs.txt @@ -29,8 +29,7 @@ with nondefault parameters, they can be edited in will find them all. Information on card services is available at: - ftp://hyper.stanford.edu/pub/pcmcia/doc - http://hyper.stanford.edu/HyperNews/get/pcmcia/home.html + http://pcmcia-cs.sourceforge.net/ Card services user programs are still required for PCMCIA devices. diff --git a/Documentation/networking/vortex.txt b/Documentation/networking/vortex.txt index 80e1cb19609f..3759acf95b29 100644 --- a/Documentation/networking/vortex.txt +++ b/Documentation/networking/vortex.txt @@ -11,7 +11,7 @@ The driver was written by Donald Becker Don is no longer the prime maintainer of this version of the driver. Please report problems to one or more of: - Andrew Morton + Andrew Morton Netdev mailing list Linux kernel mailing list @@ -274,24 +274,24 @@ Details of the device driver implementation are at the top of the source file. Additional documentation is available at Don Becker's Linux Drivers site: - http://www.scyld.com/network/vortex.html + http://www.scyld.com/vortex.html Donald Becker's driver development site: - http://www.scyld.com/network + http://www.scyld.com/network.html Donald's vortex-diag program is useful for inspecting the NIC's state: - http://www.scyld.com/diag/#pci-diags + http://www.scyld.com/ethercard_diag.html Donald's mii-diag program may be used for inspecting and manipulating the NIC's Media Independent Interface subsystem: - http://www.scyld.com/diag/#mii-diag + http://www.scyld.com/ethercard_diag.html#mii-diag Donald's wake-on-LAN page: - http://www.scyld.com/expert/wake-on-lan.html + http://www.scyld.com/wakeonlan.html 3Com's documentation for many NICs, including the ones supported by this driver is available at @@ -305,7 +305,7 @@ this driver is available at Driver updates and a detailed changelog for the modifications which were made for the 2.3/2,4 series kernel is available at - http://www.uow.edu.au/~andrewm/linux/#3c59x-2.3 + http://www.zip.com.au/~akpm/linux/#3c59x-bc Autonegotiation notes @@ -434,8 +434,8 @@ steps you should take: send all logs to the maintainer. 3) Download you card's diagnostic tool from Donald - Backer's website http://www.scyld.com/diag. Download - mii-diag.c as well. Build these. + Becker's website . + Download mii-diag.c as well. Build these. a) Run 'vortex-diag -aaee' and 'mii-diag -v' when the card is working correctly. Save the output. @@ -443,8 +443,8 @@ steps you should take: b) Run the above commands when the card is malfunctioning. Send both sets of output. -Finally, please be patient and be prepared to do some work. You may end up working on -this problem for a week or more as the maintainer asks more questions, asks for more -tests, asks for patches to be applied, etc. At the end of it all, the problem may even -remain unresolved. - +Finally, please be patient and be prepared to do some work. You may +end up working on this problem for a week or more as the maintainer +asks more questions, asks for more tests, asks for patches to be +applied, etc. At the end of it all, the problem may even remain +unresolved. -- cgit v1.2.3-59-g8ed1b