From 413de34ab93edc80ef710c54ceb0987b8496aef3 Mon Sep 17 00:00:00 2001 From: Liam Breck Date: Wed, 7 Jun 2017 11:37:52 -0700 Subject: power: supply: core: Add power_supply_prop_precharge Battery chargers use POWER_SUPPLY_PROP_PRECHARGE_CURRENT Clarify related item POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT Signed-off-by: Liam Breck Signed-off-by: Sebastian Reichel --- Documentation/power/power_supply_class.txt | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) (limited to 'Documentation/power') diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt index 01f007591070..300d37896e51 100644 --- a/Documentation/power/power_supply_class.txt +++ b/Documentation/power/power_supply_class.txt @@ -115,28 +115,33 @@ of charge when battery became full/empty". It also could mean "value of charge when battery considered full/empty at given conditions (temperature, age)". I.e. these attributes represents real thresholds, not design values. +ENERGY_FULL, ENERGY_EMPTY - same as above but for energy. + CHARGE_COUNTER - the current charge counter (in µAh). This could easily be negative; there is no empty or full value. It is only useful for relative, time-based measurements. +PRECHARGE_CURRENT - the maximum charge current during precharge phase +of charge cycle (typically 20% of battery capacity). +CHARGE_TERM_CURRENT - Charge termination current. The charge cycle +terminates when battery voltage is above recharge threshold, and charge +current is below this setting (typically 10% of battery capacity). + CONSTANT_CHARGE_CURRENT - constant charge current programmed by charger. CONSTANT_CHARGE_CURRENT_MAX - maximum charge current supported by the power supply object. -INPUT_CURRENT_LIMIT - input current limit programmed by charger. Indicates -the current drawn from a charging source. -CHARGE_TERM_CURRENT - Charge termination current used to detect the end of charge -condition. - -CALIBRATE - battery or coulomb counter calibration status CONSTANT_CHARGE_VOLTAGE - constant charge voltage programmed by charger. CONSTANT_CHARGE_VOLTAGE_MAX - maximum charge voltage supported by the power supply object. +INPUT_CURRENT_LIMIT - input current limit programmed by charger. Indicates +the current drawn from a charging source. + CHARGE_CONTROL_LIMIT - current charge control limit setting CHARGE_CONTROL_LIMIT_MAX - maximum charge control limit setting -ENERGY_FULL, ENERGY_EMPTY - same as above but for energy. +CALIBRATE - battery or coulomb counter calibration status CAPACITY - capacity in percents. CAPACITY_ALERT_MIN - minimum capacity alert value in percents. -- cgit v1.2.3-59-g8ed1b