From 3824c47714f28091f74ca2505146514b4da1f390 Mon Sep 17 00:00:00 2001 From: Ramakrishna Pallala Date: Sun, 6 May 2012 18:16:44 +0530 Subject: power_supply: Add constant charge_current and charge_voltage properties Constant Charge Current(CC) is charging parameter which limit the maximum current which can be pumped into the battery during charge cycle. Constant Charge Voltage(CV) is also charging parameter which limit the maximum voltage that battery can reach during charge cycle. It is very common practice that at low or high temperatures we do not charge the batteries upto it's fullest charge voltage to avoid battery and user safety issues. These sysfs properties will be useful for debug and to implement certain user space policies like "Charging limited due to OverTemp". Signed-off-by: Ramakrishna Pallala Signed-off-by: Anton Vorontsov --- Documentation/power/power_supply_class.txt | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation/power') diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt index 211831d4095f..c0f62ae2b5e0 100644 --- a/Documentation/power/power_supply_class.txt +++ b/Documentation/power/power_supply_class.txt @@ -112,6 +112,10 @@ CHARGE_COUNTER - the current charge counter (in µAh). This could easily be negative; there is no empty or full value. It is only useful for relative, time-based measurements. +CONSTANT_CHARGE_CURRENT - constant charge current programmed by charger. + +CONSTANT_CHARGE_VOLTAGE - constant charge voltage programmed by charger. + ENERGY_FULL, ENERGY_EMPTY - same as above but for energy. CAPACITY - capacity in percents. -- cgit v1.2.3-59-g8ed1b From e908c41806bdb9151c8f875c4f9d73c6f66e3bc8 Mon Sep 17 00:00:00 2001 From: Ramakrishna Pallala Date: Thu, 5 Jul 2012 16:59:12 +0530 Subject: power_supply: Add min/max alert properties for CAPACITY, TEMP, TEMP_AMBIENT Minimum and maximum alerts on power supply properties will help or allow the user space to "proactively" create policies like connect/disconnect charger or stop/start the user apps based on capacity or temperature parameters. These parameters can be used to avoid unnecessary polling from user space and even from kernel space if the underlying HW can support INT triggers (ex: max17042/47). This patch adds the following power supply alert type properties: CAPACITY_ALERT_MIN CAPACITY_ALERT_MAX TEMP_ALERT_MIN TEMP_ALERT_MAX TEMP_AMBIENT_ALERT_MIN TEMP_AMBIENT_ALERT_MAX Signed-off-by: Ramakrishna Pallala Signed-off-by: Anton Vorontsov --- Documentation/power/power_supply_class.txt | 6 ++++++ drivers/power/power_supply_sysfs.c | 6 ++++++ include/linux/power_supply.h | 6 ++++++ 3 files changed, 18 insertions(+) (limited to 'Documentation/power') diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt index c0f62ae2b5e0..2f0ddc15b5ac 100644 --- a/Documentation/power/power_supply_class.txt +++ b/Documentation/power/power_supply_class.txt @@ -119,11 +119,17 @@ CONSTANT_CHARGE_VOLTAGE - constant charge voltage programmed by charger. ENERGY_FULL, ENERGY_EMPTY - same as above but for energy. CAPACITY - capacity in percents. +CAPACITY_ALERT_MIN - minimum capacity alert value in percents. +CAPACITY_ALERT_MAX - maximum capacity alert value in percents. CAPACITY_LEVEL - capacity level. This corresponds to POWER_SUPPLY_CAPACITY_LEVEL_*. TEMP - temperature of the power supply. +TEMP_ALERT_MIN - minimum battery temperature alert value in milli centigrade. +TEMP_ALERT_MAX - maximum battery temperature alert value in milli centigrade. TEMP_AMBIENT - ambient temperature. +TEMP_AMBIENT_ALERT_MIN - minimum ambient temperature alert value in milli centigrade. +TEMP_AMBIENT_ALERT_MAX - maximum ambient temperature alert value in milli centigrade. TIME_TO_EMPTY - seconds left for battery to be considered empty (i.e. while battery powers a load) diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c index 58846d929b34..1d96614a17a4 100644 --- a/drivers/power/power_supply_sysfs.c +++ b/drivers/power/power_supply_sysfs.c @@ -168,9 +168,15 @@ static struct device_attribute power_supply_attrs[] = { POWER_SUPPLY_ATTR(energy_now), POWER_SUPPLY_ATTR(energy_avg), POWER_SUPPLY_ATTR(capacity), + POWER_SUPPLY_ATTR(capacity_alert_min), + POWER_SUPPLY_ATTR(capacity_alert_max), POWER_SUPPLY_ATTR(capacity_level), POWER_SUPPLY_ATTR(temp), + POWER_SUPPLY_ATTR(temp_alert_min), + POWER_SUPPLY_ATTR(temp_alert_max), POWER_SUPPLY_ATTR(temp_ambient), + POWER_SUPPLY_ATTR(temp_ambient_alert_min), + POWER_SUPPLY_ATTR(temp_ambient_alert_max), POWER_SUPPLY_ATTR(time_to_empty_now), POWER_SUPPLY_ATTR(time_to_empty_avg), POWER_SUPPLY_ATTR(time_to_full_now), diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index 53f177db6ac9..0bafbb15f29c 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -118,9 +118,15 @@ enum power_supply_property { POWER_SUPPLY_PROP_ENERGY_NOW, POWER_SUPPLY_PROP_ENERGY_AVG, POWER_SUPPLY_PROP_CAPACITY, /* in percents! */ + POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN, /* in percents! */ + POWER_SUPPLY_PROP_CAPACITY_ALERT_MAX, /* in percents! */ POWER_SUPPLY_PROP_CAPACITY_LEVEL, POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_TEMP_ALERT_MIN, + POWER_SUPPLY_PROP_TEMP_ALERT_MAX, POWER_SUPPLY_PROP_TEMP_AMBIENT, + POWER_SUPPLY_PROP_TEMP_AMBIENT_ALERT_MIN, + POWER_SUPPLY_PROP_TEMP_AMBIENT_ALERT_MAX, POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, POWER_SUPPLY_PROP_TIME_TO_FULL_NOW, -- cgit v1.2.3-59-g8ed1b