From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- Documentation/scsi/qlogicisp.txt | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 Documentation/scsi/qlogicisp.txt (limited to 'Documentation/scsi/qlogicisp.txt') diff --git a/Documentation/scsi/qlogicisp.txt b/Documentation/scsi/qlogicisp.txt new file mode 100644 index 000000000000..6920f6c76a9f --- /dev/null +++ b/Documentation/scsi/qlogicisp.txt @@ -0,0 +1,30 @@ +Notes for the QLogic ISP1020 PCI SCSI Driver: + +This driver works well in practice, but does not support disconnect/ +reconnect, which makes using it with tape drives impractical. + +It should work for most host adaptors with the ISP1020 chip. The +QLogic Corporation produces several PCI SCSI adapters which should +work: + + * IQ-PCI + * IQ-PCI-10 + * IQ-PCI-D + +This driver may work with boards containing the ISP1020A or ISP1040A +chips, but that has not been tested. + +This driver will NOT work with: + + * ISA or VL Bus Qlogic cards (they use the 'qlogicfas' driver) + * PCI-basic (it uses the 'am53c974' driver) + +Much thanks to QLogic's tech support for providing the latest ISP1020 +firmware, and for taking the time to review my code. + +Erik Moe +ehm@cris.com + +Revised: +Michael A. Griffith +grif@cs.ucr.edu -- cgit v1.2.3-59-g8ed1b