From 74665686f0e27496ea8aa47221282707f57dc178 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Date: Wed, 12 Jun 2019 14:53:01 -0300
Subject: docs: watchdog: convert docs to ReST and rename to *.rst

Convert those documents and prepare them to be part of the kernel
API book, as most of the stuff there are related to the
Kernel interfaces.

Still, in the future, it would make sense to split the docs,
as some of the stuff is clearly focused on sysadmin tasks.

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
---
 Documentation/watchdog/watchdog-parameters.rst | 745 +++++++++++++++++++++++++
 1 file changed, 745 insertions(+)
 create mode 100644 Documentation/watchdog/watchdog-parameters.rst

(limited to 'Documentation/watchdog/watchdog-parameters.rst')

diff --git a/Documentation/watchdog/watchdog-parameters.rst b/Documentation/watchdog/watchdog-parameters.rst
new file mode 100644
index 000000000000..01023382ea73
--- /dev/null
+++ b/Documentation/watchdog/watchdog-parameters.rst
@@ -0,0 +1,745 @@
+==========================
+WatchDog Module Parameters
+==========================
+
+This file provides information on the module parameters of many of
+the Linux watchdog drivers.  Watchdog driver parameter specs should
+be listed here unless the driver has its own driver-specific information
+file.
+
+See Documentation/admin-guide/kernel-parameters.rst for information on
+providing kernel parameters for builtin drivers versus loadable
+modules.
+
+-------------------------------------------------
+watchdog core:
+    open_timeout:
+	Maximum time, in seconds, for which the watchdog framework will take
+	care of pinging a running hardware watchdog until userspace opens the
+	corresponding /dev/watchdogN device. A value of 0 means an infinite
+	timeout. Setting this to a non-zero value can be useful to ensure that
+	either userspace comes up properly, or the board gets reset and allows
+	fallback logic in the bootloader to try something else.
+
+-------------------------------------------------
+acquirewdt:
+    wdt_stop:
+	Acquire WDT 'stop' io port (default 0x43)
+    wdt_start:
+	Acquire WDT 'start' io port (default 0x443)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+advantechwdt:
+    wdt_stop:
+	Advantech WDT 'stop' io port (default 0x443)
+    wdt_start:
+	Advantech WDT 'start' io port (default 0x443)
+    timeout:
+	Watchdog timeout in seconds. 1<= timeout <=63, default=60.
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+alim1535_wdt:
+    timeout:
+	Watchdog timeout in seconds. (0 < timeout < 18000, default=60
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+alim7101_wdt:
+    timeout:
+	Watchdog timeout in seconds. (1<=timeout<=3600, default=30
+    use_gpio:
+	Use the gpio watchdog (required by old cobalt boards).
+	default=0/off/no
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+ar7_wdt:
+    margin:
+	Watchdog margin in seconds (default=60)
+    nowayout:
+	Disable watchdog shutdown on close
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+armada_37xx_wdt:
+    timeout:
+	Watchdog timeout in seconds. (default=120)
+    nowayout:
+	Disable watchdog shutdown on close
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+at91rm9200_wdt:
+    wdt_time:
+	Watchdog time in seconds. (default=5)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+at91sam9_wdt:
+    heartbeat:
+	Watchdog heartbeats in seconds. (default = 15)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+bcm47xx_wdt:
+    wdt_time:
+	Watchdog time in seconds. (default=30)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+coh901327_wdt:
+    margin:
+	Watchdog margin in seconds (default 60s)
+
+-------------------------------------------------
+
+cpu5wdt:
+    port:
+	base address of watchdog card, default is 0x91
+    verbose:
+	be verbose, default is 0 (no)
+    ticks:
+	count down ticks, default is 10000
+
+-------------------------------------------------
+
+cpwd:
+    wd0_timeout:
+	Default watchdog0 timeout in 1/10secs
+    wd1_timeout:
+	Default watchdog1 timeout in 1/10secs
+    wd2_timeout:
+	Default watchdog2 timeout in 1/10secs
+
+-------------------------------------------------
+
+da9052wdt:
+    timeout:
+	Watchdog timeout in seconds. 2<= timeout <=131, default=2.048s
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+davinci_wdt:
+    heartbeat:
+	Watchdog heartbeat period in seconds from 1 to 600, default 60
+
+-------------------------------------------------
+
+ebc-c384_wdt:
+    timeout:
+	Watchdog timeout in seconds. (1<=timeout<=15300, default=60)
+    nowayout:
+	Watchdog cannot be stopped once started
+
+-------------------------------------------------
+
+ep93xx_wdt:
+    nowayout:
+	Watchdog cannot be stopped once started
+    timeout:
+	Watchdog timeout in seconds. (1<=timeout<=3600, default=TBD)
+
+-------------------------------------------------
+
+eurotechwdt:
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+    io:
+	Eurotech WDT io port (default=0x3f0)
+    irq:
+	Eurotech WDT irq (default=10)
+    ev:
+	Eurotech WDT event type (default is `int`)
+
+-------------------------------------------------
+
+gef_wdt:
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+geodewdt:
+    timeout:
+	Watchdog timeout in seconds. 1<= timeout <=131, default=60.
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+i6300esb:
+    heartbeat:
+	Watchdog heartbeat in seconds. (1<heartbeat<2046, default=30)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+iTCO_wdt:
+    heartbeat:
+	Watchdog heartbeat in seconds.
+	(2<heartbeat<39 (TCO v1) or 613 (TCO v2), default=30)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+iTCO_vendor_support:
+    vendorsupport:
+	iTCO vendor specific support mode, default=0 (none),
+	1=SuperMicro Pent3, 2=SuperMicro Pent4+, 911=Broken SMI BIOS
+
+-------------------------------------------------
+
+ib700wdt:
+    timeout:
+	Watchdog timeout in seconds. 0<= timeout <=30, default=30.
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+ibmasr:
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+imx2_wdt:
+    timeout:
+	Watchdog timeout in seconds (default 60 s)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+indydog:
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+iop_wdt:
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+it8712f_wdt:
+    margin:
+	Watchdog margin in seconds (default 60)
+    nowayout:
+	Disable watchdog shutdown on close
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+it87_wdt:
+    nogameport:
+	Forbid the activation of game port, default=0
+    nocir:
+	Forbid the use of CIR (workaround for some buggy setups); set to 1 if
+system resets despite watchdog daemon running, default=0
+    exclusive:
+	Watchdog exclusive device open, default=1
+    timeout:
+	Watchdog timeout in seconds, default=60
+    testmode:
+	Watchdog test mode (1 = no reboot), default=0
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+ixp4xx_wdt:
+    heartbeat:
+	Watchdog heartbeat in seconds (default 60s)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+ks8695_wdt:
+    wdt_time:
+	Watchdog time in seconds. (default=5)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+machzwd:
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+    action:
+	after watchdog resets, generate:
+	0 = RESET(*)  1 = SMI  2 = NMI  3 = SCI
+
+-------------------------------------------------
+
+max63xx_wdt:
+    heartbeat:
+	Watchdog heartbeat period in seconds from 1 to 60, default 60
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+    nodelay:
+	Force selection of a timeout setting without initial delay
+	(max6373/74 only, default=0)
+
+-------------------------------------------------
+
+mixcomwd:
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+mpc8xxx_wdt:
+    timeout:
+	Watchdog timeout in ticks. (0<timeout<65536, default=65535)
+    reset:
+	Watchdog Interrupt/Reset Mode. 0 = interrupt, 1 = reset
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+mv64x60_wdt:
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+ni903x_wdt:
+    timeout:
+	Initial watchdog timeout in seconds (0<timeout<516, default=60)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+nic7018_wdt:
+    timeout:
+	Initial watchdog timeout in seconds (0<timeout<464, default=80)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+nuc900_wdt:
+    heartbeat:
+	Watchdog heartbeats in seconds.
+	(default = 15)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+omap_wdt:
+    timer_margin:
+	initial watchdog timeout (in seconds)
+    early_enable:
+	Watchdog is started on module insertion (default=0
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+orion_wdt:
+    heartbeat:
+	Initial watchdog heartbeat in seconds
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+pc87413_wdt:
+    io:
+	pc87413 WDT I/O port (default: io).
+    timeout:
+	Watchdog timeout in minutes (default=timeout).
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+pika_wdt:
+    heartbeat:
+	Watchdog heartbeats in seconds. (default = 15)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+pnx4008_wdt:
+    heartbeat:
+	Watchdog heartbeat period in seconds from 1 to 60, default 19
+    nowayout:
+	Set to 1 to keep watchdog running after device release
+
+-------------------------------------------------
+
+pnx833x_wdt:
+    timeout:
+	Watchdog timeout in Mhz. (68Mhz clock), default=2040000000 (30 seconds)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+    start_enabled:
+	Watchdog is started on module insertion (default=1)
+
+-------------------------------------------------
+
+rc32434_wdt:
+    timeout:
+	Watchdog timeout value, in seconds (default=20)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+riowd:
+    riowd_timeout:
+	Watchdog timeout in minutes (default=1)
+
+-------------------------------------------------
+
+s3c2410_wdt:
+    tmr_margin:
+	Watchdog tmr_margin in seconds. (default=15)
+    tmr_atboot:
+	Watchdog is started at boot time if set to 1, default=0
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+    soft_noboot:
+	Watchdog action, set to 1 to ignore reboots, 0 to reboot
+    debug:
+	Watchdog debug, set to >1 for debug, (default 0)
+
+-------------------------------------------------
+
+sa1100_wdt:
+    margin:
+	Watchdog margin in seconds (default 60s)
+
+-------------------------------------------------
+
+sb_wdog:
+    timeout:
+	Watchdog timeout in microseconds (max/default 8388607 or 8.3ish secs)
+
+-------------------------------------------------
+
+sbc60xxwdt:
+    wdt_stop:
+	SBC60xx WDT 'stop' io port (default 0x45)
+    wdt_start:
+	SBC60xx WDT 'start' io port (default 0x443)
+    timeout:
+	Watchdog timeout in seconds. (1<=timeout<=3600, default=30)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+sbc7240_wdt:
+    timeout:
+	Watchdog timeout in seconds. (1<=timeout<=255, default=30)
+    nowayout:
+	Disable watchdog when closing device file
+
+-------------------------------------------------
+
+sbc8360:
+    timeout:
+	Index into timeout table (0-63) (default=27 (60s))
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+sbc_epx_c3:
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+sbc_fitpc2_wdt:
+    margin:
+	Watchdog margin in seconds (default 60s)
+    nowayout:
+	Watchdog cannot be stopped once started
+
+-------------------------------------------------
+
+sbsa_gwdt:
+    timeout:
+	Watchdog timeout in seconds. (default 10s)
+    action:
+	Watchdog action at the first stage timeout,
+	set to 0 to ignore, 1 to panic. (default=0)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+sc1200wdt:
+    isapnp:
+	When set to 0 driver ISA PnP support will be disabled (default=1)
+    io:
+	io port
+    timeout:
+	range is 0-255 minutes, default is 1
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+sc520_wdt:
+    timeout:
+	Watchdog timeout in seconds. (1 <= timeout <= 3600, default=30)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+sch311x_wdt:
+    force_id:
+	Override the detected device ID
+    therm_trip:
+	Should a ThermTrip trigger the reset generator
+    timeout:
+	Watchdog timeout in seconds. 1<= timeout <=15300, default=60
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+scx200_wdt:
+    margin:
+	Watchdog margin in seconds
+    nowayout:
+	Disable watchdog shutdown on close
+
+-------------------------------------------------
+
+shwdt:
+    clock_division_ratio:
+	Clock division ratio. Valid ranges are from 0x5 (1.31ms)
+	to 0x7 (5.25ms). (default=7)
+    heartbeat:
+	Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default=30
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+smsc37b787_wdt:
+    timeout:
+	range is 1-255 units, default is 60
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+softdog:
+    soft_margin:
+	Watchdog soft_margin in seconds.
+	(0 < soft_margin < 65536, default=60)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+    soft_noboot:
+	Softdog action, set to 1 to ignore reboots, 0 to reboot
+	(default=0)
+
+-------------------------------------------------
+
+stmp3xxx_wdt:
+    heartbeat:
+	Watchdog heartbeat period in seconds from 1 to 4194304, default 19
+
+-------------------------------------------------
+
+tegra_wdt:
+    heartbeat:
+	Watchdog heartbeats in seconds. (default = 120)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+ts72xx_wdt:
+    timeout:
+	Watchdog timeout in seconds. (1 <= timeout <= 8, default=8)
+    nowayout:
+	Disable watchdog shutdown on close
+
+-------------------------------------------------
+
+twl4030_wdt:
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+txx9wdt:
+    timeout:
+	Watchdog timeout in seconds. (0<timeout<N, default=60)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+uniphier_wdt:
+    timeout:
+	Watchdog timeout in power of two seconds.
+	(1 <= timeout <= 128, default=64)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+w83627hf_wdt:
+    wdt_io:
+	w83627hf/thf WDT io port (default 0x2E)
+    timeout:
+	Watchdog timeout in seconds. 1 <= timeout <= 255, default=60.
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+w83877f_wdt:
+    timeout:
+	Watchdog timeout in seconds. (1<=timeout<=3600, default=30)
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+w83977f_wdt:
+    timeout:
+	Watchdog timeout in seconds (15..7635), default=45)
+    testmode:
+	Watchdog testmode (1 = no reboot), default=0
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+wafer5823wdt:
+    timeout:
+	Watchdog timeout in seconds. 1 <= timeout <= 255, default=60.
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+wdt285:
+    soft_margin:
+	Watchdog timeout in seconds (default=60)
+
+-------------------------------------------------
+
+wdt977:
+    timeout:
+	Watchdog timeout in seconds (60..15300, default=60)
+    testmode:
+	Watchdog testmode (1 = no reboot), default=0
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+wm831x_wdt:
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+wm8350_wdt:
+    nowayout:
+	Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+
+-------------------------------------------------
+
+sun4v_wdt:
+    timeout_ms:
+	Watchdog timeout in milliseconds 1..180000, default=60000)
+    nowayout:
+	Watchdog cannot be stopped once started
-- 
cgit v1.2.3-59-g8ed1b


From 3bd41e595b09ecce472432bbdaf7544d2a94a417 Mon Sep 17 00:00:00 2001
From: Jerry Hoemann <jerry.hoemann@hpe.com>
Date: Wed, 12 Jun 2019 18:02:37 -0600
Subject: docs: watchdog: Fix build error.

make htmldocs fails due to missing blank line following header.

Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
---
 Documentation/watchdog/watchdog-parameters.rst | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'Documentation/watchdog/watchdog-parameters.rst')

diff --git a/Documentation/watchdog/watchdog-parameters.rst b/Documentation/watchdog/watchdog-parameters.rst
index 01023382ea73..a3985cc5aeda 100644
--- a/Documentation/watchdog/watchdog-parameters.rst
+++ b/Documentation/watchdog/watchdog-parameters.rst
@@ -12,6 +12,7 @@ providing kernel parameters for builtin drivers versus loadable
 modules.
 
 -------------------------------------------------
+
 watchdog core:
     open_timeout:
 	Maximum time, in seconds, for which the watchdog framework will take
@@ -22,6 +23,7 @@ watchdog core:
 	fallback logic in the bootloader to try something else.
 
 -------------------------------------------------
+
 acquirewdt:
     wdt_stop:
 	Acquire WDT 'stop' io port (default 0x43)
-- 
cgit v1.2.3-59-g8ed1b