From 7c7055c7c5c7a7e66395777b72e6693a81831a54 Mon Sep 17 00:00:00 2001 From: Pierre-Yves MORDRET Date: Tue, 13 Mar 2018 17:42:00 +0100 Subject: dt-bindings: stm32-dma: introduce DMA features bitfield This bitfield intends to address features to be activated within the driver. Initially the mask was only meant for FIFO Threshold management. Backward compatibility is preserved but the meaning of this field has been extended to features instead of only threshold. Signed-off-by: Pierre-Yves MORDRET Reviewed-by: Rob Herring Signed-off-by: Vinod Koul --- Documentation/devicetree/bindings/dma/stm32-dma.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/dma/stm32-dma.txt b/Documentation/devicetree/bindings/dma/stm32-dma.txt index 0b55718bf889..c5f519097204 100644 --- a/Documentation/devicetree/bindings/dma/stm32-dma.txt +++ b/Documentation/devicetree/bindings/dma/stm32-dma.txt @@ -62,14 +62,14 @@ channel: a phandle to the DMA controller plus the following four integer cells: 0x1: medium 0x2: high 0x3: very high -4. A 32bit mask specifying the DMA FIFO threshold configuration which are device - dependent: - -bit 0-1: Fifo threshold +4. A 32bit bitfield value specifying DMA features which are device dependent: + -bit 0-1: DMA FIFO threshold selection 0x0: 1/4 full FIFO 0x1: 1/2 full FIFO 0x2: 3/4 full FIFO 0x3: full FIFO + Example: usart1: serial@40011000 { -- cgit v1.2.3-59-g8ed1b