From d6f66f618569b8f6cc65435b1cab4be7f0610f32 Mon Sep 17 00:00:00 2001
From: Simon Shields <simon@lineageos.org>
Date: Mon, 7 Jan 2019 11:09:26 -0800
Subject: Input: tm2-touchkey - add support for midas touchkey
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The touchkey on midas boards is almost identical.
The only real difference is that it uses the same register for both
keycode and base.

Signed-off-by: Simon Shields <simon@lineageos.org>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'Documentation')

diff --git a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt
index 635f62c756ee..3df82c4017ff 100644
--- a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt
+++ b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt
@@ -1,7 +1,9 @@
 Samsung tm2-touchkey
 
 Required properties:
-- compatible: must be "cypress,tm2-touchkey"
+- compatible:
+    * "cypress,tm2-touchkey" - for the touchkey found on the tm2 board
+    * "cypress,midas-touchkey" - for the touchkey found on midas boards
 - reg: I2C address of the chip.
 - interrupt-parent: a phandle for the interrupt controller (see interrupt
 	binding[0]).
-- 
cgit v1.2.3-59-g8ed1b


From 07df1c55270c142b5027dd31787c42d2b01e2e92 Mon Sep 17 00:00:00 2001
From: Jonathan Bakker <xc-racer2@live.ca>
Date: Mon, 7 Jan 2019 11:11:55 -0800
Subject: Input: tm2-touchkey - allow specifying custom keycodes
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Not all devices use the same keycodes in the same order,
so add possibility to define keycodes for buttons present
on actual hardware.

If keycodes property is not present, we assume that device has
at least MENU and BACK keys.

Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../bindings/input/cypress,tm2-touchkey.txt        |  4 ++
 drivers/input/keyboard/tm2-touchkey.c              | 49 ++++++++++++----------
 2 files changed, 31 insertions(+), 22 deletions(-)

(limited to 'Documentation')

diff --git a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt
index 3df82c4017ff..22466d8a750d 100644
--- a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt
+++ b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt
@@ -12,6 +12,9 @@ Required properties:
 - vcc-supply : internal regulator output. 1.8V
 - vdd-supply : power supply for IC 3.3V
 
+Optional properties:
+- linux,keycodes: array of keycodes (max 4), default KEY_PHONE and KEY_BACK
+
 [0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
 
 Example:
@@ -25,5 +28,6 @@ Example:
 			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 			vcc-supply=<&ldo32_reg>;
 			vdd-supply=<&ldo33_reg>;
+			linux,keycodes = <KEY_PHONE KEY_BACK>;
 		};
 	};
diff --git a/drivers/input/keyboard/tm2-touchkey.c b/drivers/input/keyboard/tm2-touchkey.c
index 0336789ab1bb..b55faf597d8a 100644
--- a/drivers/input/keyboard/tm2-touchkey.c
+++ b/drivers/input/keyboard/tm2-touchkey.c
@@ -35,11 +35,6 @@
 #define TM2_TOUCHKEY_LED_VOLTAGE_MIN	2500000
 #define TM2_TOUCHKEY_LED_VOLTAGE_MAX	3300000
 
-enum {
-	TM2_TOUCHKEY_KEY_MENU = 0x1,
-	TM2_TOUCHKEY_KEY_BACK,
-};
-
 struct touchkey_variant {
 	u8 keycode_reg;
 	u8 base_reg;
@@ -52,6 +47,8 @@ struct tm2_touchkey_data {
 	struct regulator *vdd;
 	struct regulator_bulk_data regulators[2];
 	const struct touchkey_variant *variant;
+	u32 keycodes[4];
+	int num_keycodes;
 };
 
 static const struct touchkey_variant tm2_touchkey_variant = {
@@ -112,7 +109,8 @@ static irqreturn_t tm2_touchkey_irq_handler(int irq, void *devid)
 {
 	struct tm2_touchkey_data *touchkey = devid;
 	int data;
-	int key;
+	int index;
+	int i;
 
 	data = i2c_smbus_read_byte_data(touchkey->client,
 					touchkey->variant->keycode_reg);
@@ -122,26 +120,20 @@ static irqreturn_t tm2_touchkey_irq_handler(int irq, void *devid)
 		goto out;
 	}
 
-	switch (data & TM2_TOUCHKEY_BIT_KEYCODE) {
-	case TM2_TOUCHKEY_KEY_MENU:
-		key = KEY_PHONE;
-		break;
-
-	case TM2_TOUCHKEY_KEY_BACK:
-		key = KEY_BACK;
-		break;
-
-	default:
+	index = (data & TM2_TOUCHKEY_BIT_KEYCODE) - 1;
+	if (index < 0 || index >= touchkey->num_keycodes) {
 		dev_warn(&touchkey->client->dev,
-			 "unhandled keycode, data %#02x\n", data);
+			 "invalid keycode index %d\n", index);
 		goto out;
 	}
 
 	if (data & TM2_TOUCHKEY_BIT_PRESS_EV) {
-		input_report_key(touchkey->input_dev, KEY_PHONE, 0);
-		input_report_key(touchkey->input_dev, KEY_BACK, 0);
+		for (i = 0; i < touchkey->num_keycodes; i++)
+			input_report_key(touchkey->input_dev,
+					 touchkey->keycodes[i], 0);
 	} else {
-		input_report_key(touchkey->input_dev, key, 1);
+		input_report_key(touchkey->input_dev,
+				 touchkey->keycodes[index], 1);
 	}
 
 	input_sync(touchkey->input_dev);
@@ -153,8 +145,10 @@ out:
 static int tm2_touchkey_probe(struct i2c_client *client,
 			      const struct i2c_device_id *id)
 {
+	struct device_node *np = client->dev.of_node;
 	struct tm2_touchkey_data *touchkey;
 	int error;
+	int i;
 
 	if (!i2c_check_functionality(client->adapter,
 			I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA)) {
@@ -184,6 +178,16 @@ static int tm2_touchkey_probe(struct i2c_client *client,
 	/* Save VDD for easy access */
 	touchkey->vdd = touchkey->regulators[1].consumer;
 
+	touchkey->num_keycodes = of_property_read_variable_u32_array(np,
+					"linux,keycodes", touchkey->keycodes, 0,
+					ARRAY_SIZE(touchkey->keycodes));
+	if (touchkey->num_keycodes <= 0) {
+		/* default keycodes */
+		touchkey->keycodes[0] = KEY_PHONE;
+		touchkey->keycodes[1] = KEY_BACK;
+		touchkey->num_keycodes = 2;
+	}
+
 	error = tm2_touchkey_power_enable(touchkey);
 	if (error) {
 		dev_err(&client->dev, "failed to power up device: %d\n", error);
@@ -208,8 +212,9 @@ static int tm2_touchkey_probe(struct i2c_client *client,
 	touchkey->input_dev->name = TM2_TOUCHKEY_DEV_NAME;
 	touchkey->input_dev->id.bustype = BUS_I2C;
 
-	input_set_capability(touchkey->input_dev, EV_KEY, KEY_PHONE);
-	input_set_capability(touchkey->input_dev, EV_KEY, KEY_BACK);
+	for (i = 0; i < touchkey->num_keycodes; i++)
+		input_set_capability(touchkey->input_dev, EV_KEY,
+				     touchkey->keycodes[i]);
 
 	error = input_register_device(touchkey->input_dev);
 	if (error) {
-- 
cgit v1.2.3-59-g8ed1b


From 1cdbd3e57698fa22eddb522b2c7fa6048420da5f Mon Sep 17 00:00:00 2001
From: Jonathan Bakker <xc-racer2@live.ca>
Date: Mon, 7 Jan 2019 11:21:16 -0800
Subject: Input: tm2-touchkey - add support for aries touchkey variant
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The touchkey variant found on aries board is slighty different,
it uses a fixed regulator and writes/read to the same place

Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../bindings/input/cypress,tm2-touchkey.txt        |  1 +
 drivers/input/keyboard/tm2-touchkey.c              | 53 +++++++++++++++++++---
 2 files changed, 47 insertions(+), 7 deletions(-)

(limited to 'Documentation')

diff --git a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt
index 22466d8a750d..f517660a3204 100644
--- a/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt
+++ b/Documentation/devicetree/bindings/input/cypress,tm2-touchkey.txt
@@ -4,6 +4,7 @@ Required properties:
 - compatible:
     * "cypress,tm2-touchkey" - for the touchkey found on the tm2 board
     * "cypress,midas-touchkey" - for the touchkey found on midas boards
+    * "cypress,aries-touchkey" - for the touchkey found on aries boards
 - reg: I2C address of the chip.
 - interrupt-parent: a phandle for the interrupt controller (see interrupt
 	binding[0]).
diff --git a/drivers/input/keyboard/tm2-touchkey.c b/drivers/input/keyboard/tm2-touchkey.c
index b55faf597d8a..7dbef96559d2 100644
--- a/drivers/input/keyboard/tm2-touchkey.c
+++ b/drivers/input/keyboard/tm2-touchkey.c
@@ -28,6 +28,8 @@
 
 #define TM2_TOUCHKEY_DEV_NAME		"tm2-touchkey"
 
+#define ARIES_TOUCHKEY_CMD_LED_ON	0x1
+#define ARIES_TOUCHKEY_CMD_LED_OFF	0x2
 #define TM2_TOUCHKEY_CMD_LED_ON		0x10
 #define TM2_TOUCHKEY_CMD_LED_OFF	0x20
 #define TM2_TOUCHKEY_BIT_PRESS_EV	BIT(3)
@@ -38,6 +40,10 @@
 struct touchkey_variant {
 	u8 keycode_reg;
 	u8 base_reg;
+	u8 cmd_led_on;
+	u8 cmd_led_off;
+	bool no_reg;
+	bool fixed_regulator;
 };
 
 struct tm2_touchkey_data {
@@ -54,11 +60,22 @@ struct tm2_touchkey_data {
 static const struct touchkey_variant tm2_touchkey_variant = {
 	.keycode_reg = 0x03,
 	.base_reg = 0x00,
+	.cmd_led_on = TM2_TOUCHKEY_CMD_LED_ON,
+	.cmd_led_off = TM2_TOUCHKEY_CMD_LED_OFF,
 };
 
 static const struct touchkey_variant midas_touchkey_variant = {
 	.keycode_reg = 0x00,
 	.base_reg = 0x00,
+	.cmd_led_on = TM2_TOUCHKEY_CMD_LED_ON,
+	.cmd_led_off = TM2_TOUCHKEY_CMD_LED_OFF,
+};
+
+static struct touchkey_variant aries_touchkey_variant = {
+	.no_reg = true,
+	.fixed_regulator = true,
+	.cmd_led_on = ARIES_TOUCHKEY_CMD_LED_ON,
+	.cmd_led_off = ARIES_TOUCHKEY_CMD_LED_OFF,
 };
 
 static void tm2_touchkey_led_brightness_set(struct led_classdev *led_dev,
@@ -71,15 +88,20 @@ static void tm2_touchkey_led_brightness_set(struct led_classdev *led_dev,
 
 	if (brightness == LED_OFF) {
 		volt = TM2_TOUCHKEY_LED_VOLTAGE_MIN;
-		data = TM2_TOUCHKEY_CMD_LED_OFF;
+		data = touchkey->variant->cmd_led_off;
 	} else {
 		volt = TM2_TOUCHKEY_LED_VOLTAGE_MAX;
-		data = TM2_TOUCHKEY_CMD_LED_ON;
+		data = touchkey->variant->cmd_led_on;
 	}
 
-	regulator_set_voltage(touchkey->vdd, volt, volt);
-	i2c_smbus_write_byte_data(touchkey->client,
-				  touchkey->variant->base_reg, data);
+	if (!touchkey->variant->fixed_regulator)
+		regulator_set_voltage(touchkey->vdd, volt, volt);
+
+	if (touchkey->variant->no_reg)
+		i2c_smbus_write_byte(touchkey->client, data);
+	else
+		i2c_smbus_write_byte_data(touchkey->client,
+					  touchkey->variant->base_reg, data);
 }
 
 static int tm2_touchkey_power_enable(struct tm2_touchkey_data *touchkey)
@@ -112,8 +134,11 @@ static irqreturn_t tm2_touchkey_irq_handler(int irq, void *devid)
 	int index;
 	int i;
 
-	data = i2c_smbus_read_byte_data(touchkey->client,
-					touchkey->variant->keycode_reg);
+	if (touchkey->variant->no_reg)
+		data = i2c_smbus_read_byte(touchkey->client);
+	else
+		data = i2c_smbus_read_byte_data(touchkey->client,
+						touchkey->variant->keycode_reg);
 	if (data < 0) {
 		dev_err(&touchkey->client->dev,
 			"failed to read i2c data: %d\n", data);
@@ -139,6 +164,14 @@ static irqreturn_t tm2_touchkey_irq_handler(int irq, void *devid)
 	input_sync(touchkey->input_dev);
 
 out:
+	if (touchkey->variant->fixed_regulator &&
+				data & TM2_TOUCHKEY_BIT_PRESS_EV) {
+		/* touch turns backlight on, so make sure we're in sync */
+		if (touchkey->led_dev.brightness == LED_OFF)
+			tm2_touchkey_led_brightness_set(&touchkey->led_dev,
+							LED_OFF);
+	}
+
 	return IRQ_HANDLED;
 }
 
@@ -246,6 +279,9 @@ static int tm2_touchkey_probe(struct i2c_client *client,
 		return error;
 	}
 
+	if (touchkey->variant->fixed_regulator)
+		tm2_touchkey_led_brightness_set(&touchkey->led_dev, LED_ON);
+
 	return 0;
 }
 
@@ -291,6 +327,9 @@ static const struct of_device_id tm2_touchkey_of_match[] = {
 	}, {
 		.compatible = "cypress,midas-touchkey",
 		.data = &midas_touchkey_variant,
+	}, {
+		.compatible = "cypress,aries-touchkey",
+		.data = &aries_touchkey_variant,
 	},
 	{ },
 };
-- 
cgit v1.2.3-59-g8ed1b


From a2f39dac0decd9943ba14e14fb58535bb149fd4e Mon Sep 17 00:00:00 2001
From: Marco Felsch <m.felsch@pengutronix.de>
Date: Sun, 13 Jan 2019 23:08:32 -0800
Subject: Input: edt-ft5x06 - add support for Evervision FT5726

Evervision displays are using different Focaltech touchscreen
controllers. This commit adds the initial support for the ones using the
FT5726 controller. Receiving the touch data is the same as for the
GENERIC_FT but the x and y cooridnates are swapped. The main differences
are the register addresses where the GAIN and THRESHOLD parameters are
stored.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../bindings/input/touchscreen/edt-ft5x06.txt      |  4 +-
 drivers/input/touchscreen/edt-ft5x06.c             | 44 ++++++++++++++++++++--
 2 files changed, 44 insertions(+), 4 deletions(-)

(limited to 'Documentation')

diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
index da2dc5d6c98b..179e434f5619 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
@@ -1,11 +1,12 @@
 FocalTech EDT-FT5x06 Polytouch driver
 =====================================
 
-There are 3 variants of the chip for various touch panel sizes
+There are 5 variants of the chip for various touch panel sizes
 FT5206GE1  2.8" .. 3.8"
 FT5306DE4  4.3" .. 7"
 FT5406EE8  7"   .. 8.9"
 FT5506EEG  7"   .. 8.9"
+FT5726NEI  5.7” .. 11.6"
 
 The software interface is identical for all those chips, so that
 currently there is no need for the driver to distinguish between the
@@ -19,6 +20,7 @@ Required properties:
            or:  "edt,edt-ft5306"
            or:  "edt,edt-ft5406"
            or:  "edt,edt-ft5506"
+           or:  "evervision,ev-ft5726"
            or:  "focaltech,ft6236"
 
  - reg:         I2C slave address of the chip (0x38)
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index 1e18ca0d1b4e..1cd5b804a456 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -31,6 +31,7 @@
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/i2c.h>
+#include <linux/kernel.h>
 #include <linux/uaccess.h>
 #include <linux/delay.h>
 #include <linux/debugfs.h>
@@ -53,6 +54,9 @@
 #define M09_REGISTER_NUM_X		0x94
 #define M09_REGISTER_NUM_Y		0x95
 
+#define EV_REGISTER_THRESHOLD		0x40
+#define EV_REGISTER_GAIN		0x41
+
 #define NO_REGISTER			0xff
 
 #define WORK_REGISTER_OPMODE		0x3c
@@ -73,6 +77,7 @@ enum edt_ver {
 	EDT_M06,
 	EDT_M09,
 	EDT_M12,
+	EV_FT,
 	GENERIC_FT,
 };
 
@@ -190,6 +195,7 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id)
 
 	case EDT_M09:
 	case EDT_M12:
+	case EV_FT:
 	case GENERIC_FT:
 		cmd = 0x0;
 		offset = 3;
@@ -242,6 +248,10 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id)
 
 		x = ((buf[0] << 8) | buf[1]) & 0x0fff;
 		y = ((buf[2] << 8) | buf[3]) & 0x0fff;
+		/* The FT5x26 send the y coordinate first */
+		if (tsdata->version == EV_FT)
+			swap(x, y);
+
 		id = (buf[2] >> 4) & 0x0f;
 		down = type != TOUCH_EVENT_UP;
 
@@ -275,8 +285,10 @@ static int edt_ft5x06_register_write(struct edt_ft5x06_ts_data *tsdata,
 		wrbuf[3] = wrbuf[0] ^ wrbuf[1] ^ wrbuf[2];
 		return edt_ft5x06_ts_readwrite(tsdata->client, 4,
 					wrbuf, 0, NULL);
+	/* fallthrough */
 	case EDT_M09:
 	case EDT_M12:
+	case EV_FT:
 	case GENERIC_FT:
 		wrbuf[0] = addr;
 		wrbuf[1] = value;
@@ -315,8 +327,10 @@ static int edt_ft5x06_register_read(struct edt_ft5x06_ts_data *tsdata,
 		}
 		break;
 
+	/* fallthrough */
 	case EDT_M09:
 	case EDT_M12:
+	case EV_FT:
 	case GENERIC_FT:
 		wrbuf[0] = addr;
 		error = edt_ft5x06_ts_readwrite(tsdata->client, 1,
@@ -605,8 +619,9 @@ static int edt_ft5x06_work_mode(struct edt_ft5x06_ts_data *tsdata)
 				  tsdata->threshold);
 	edt_ft5x06_register_write(tsdata, reg_addr->reg_gain,
 				  tsdata->gain);
-	edt_ft5x06_register_write(tsdata, reg_addr->reg_offset,
-				  tsdata->offset);
+	if (reg_addr->reg_offset != NO_REGISTER)
+		edt_ft5x06_register_write(tsdata, reg_addr->reg_offset,
+					  tsdata->offset);
 	if (reg_addr->reg_report_rate != NO_REGISTER)
 		edt_ft5x06_register_write(tsdata, reg_addr->reg_report_rate,
 				  tsdata->report_rate);
@@ -867,6 +882,16 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client,
 		case 0x5a:   /* Solomon Goldentek Display */
 			snprintf(model_name, EDT_NAME_LEN, "GKTW50SCED1R0");
 			break;
+		case 0x59:  /* Evervision Display with FT5xx6 TS */
+			tsdata->version = EV_FT;
+			error = edt_ft5x06_ts_readwrite(client, 1, "\x53",
+							1, rdbuf);
+			if (error)
+				return error;
+			strlcpy(fw_version, rdbuf, 1);
+			snprintf(model_name, EDT_NAME_LEN,
+				 "EVERVISION-FT5726NEi");
+			break;
 		default:
 			snprintf(model_name, EDT_NAME_LEN,
 				 "generic ft5x06 (%02x)",
@@ -912,7 +937,9 @@ edt_ft5x06_ts_get_parameters(struct edt_ft5x06_ts_data *tsdata)
 	tsdata->threshold = edt_ft5x06_register_read(tsdata,
 						     reg_addr->reg_threshold);
 	tsdata->gain = edt_ft5x06_register_read(tsdata, reg_addr->reg_gain);
-	tsdata->offset = edt_ft5x06_register_read(tsdata, reg_addr->reg_offset);
+	if (reg_addr->reg_offset != NO_REGISTER)
+		tsdata->offset =
+			edt_ft5x06_register_read(tsdata, reg_addr->reg_offset);
 	if (reg_addr->reg_report_rate != NO_REGISTER)
 		tsdata->report_rate = edt_ft5x06_register_read(tsdata,
 						reg_addr->reg_report_rate);
@@ -954,6 +981,15 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata)
 		reg_addr->reg_num_y = M09_REGISTER_NUM_Y;
 		break;
 
+	case EV_FT:
+		reg_addr->reg_threshold = EV_REGISTER_THRESHOLD;
+		reg_addr->reg_gain = EV_REGISTER_GAIN;
+		reg_addr->reg_offset = NO_REGISTER;
+		reg_addr->reg_num_x = NO_REGISTER;
+		reg_addr->reg_num_y = NO_REGISTER;
+		reg_addr->reg_report_rate = NO_REGISTER;
+		break;
+
 	case GENERIC_FT:
 		/* this is a guesswork */
 		reg_addr->reg_threshold = M09_REGISTER_THRESHOLD;
@@ -1155,6 +1191,7 @@ static const struct edt_i2c_chip_data edt_ft6236_data = {
 static const struct i2c_device_id edt_ft5x06_ts_id[] = {
 	{ .name = "edt-ft5x06", .driver_data = (long)&edt_ft5x06_data },
 	{ .name = "edt-ft5506", .driver_data = (long)&edt_ft5506_data },
+	{ .name = "ev-ft5726", .driver_data = (long)&edt_ft5506_data },
 	/* Note no edt- prefix for compatibility with the ft6236.c driver */
 	{ .name = "ft6236", .driver_data = (long)&edt_ft6236_data },
 	{ /* sentinel */ }
@@ -1167,6 +1204,7 @@ static const struct of_device_id edt_ft5x06_of_match[] = {
 	{ .compatible = "edt,edt-ft5306", .data = &edt_ft5x06_data },
 	{ .compatible = "edt,edt-ft5406", .data = &edt_ft5x06_data },
 	{ .compatible = "edt,edt-ft5506", .data = &edt_ft5506_data },
+	{ .compatible = "evervision,ev-ft5726", .data = &edt_ft5506_data },
 	/* Note focaltech vendor prefix for compatibility with ft6236.c */
 	{ .compatible = "focaltech,ft6236", .data = &edt_ft6236_data },
 	{ /* sentinel */ }
-- 
cgit v1.2.3-59-g8ed1b


From b6eba86030bf2fa3abcf9a0e3fb04527330da52e Mon Sep 17 00:00:00 2001
From: Marco Felsch <m.felsch@pengutronix.de>
Date: Sun, 13 Jan 2019 23:10:50 -0800
Subject: Input: edt-ft5x06 - add offset support for ev-ft5726

Unfortunately the evervision focaltech implementation uses two offset
registers, one for the x coordinate and one for y.

This patch extends the driver to handle those offset registers only for
devices that support these.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../bindings/input/touchscreen/edt-ft5x06.txt      |  9 +++++
 drivers/input/touchscreen/edt-ft5x06.c             | 46 ++++++++++++++++++++++
 2 files changed, 55 insertions(+)

(limited to 'Documentation')

diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
index 179e434f5619..870b8c5cce9b 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
@@ -44,6 +44,15 @@ Optional properties:
 
  - offset:      allows setting the edge compensation in the range from
                 0 to 31.
+
+ - offset-x:    Same as offset, but applies only to the horizontal position.
+                Range from 0 to 80, only supported by evervision,ev-ft5726
+                devices.
+
+ - offset-y:    Same as offset, but applies only to the vertical position.
+                Range from 0 to 80, only supported by evervision,ev-ft5726
+                devices.
+
  - touchscreen-size-x	   : See touchscreen.txt
  - touchscreen-size-y	   : See touchscreen.txt
  - touchscreen-fuzz-x      : See touchscreen.txt
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index a67915535b47..702bfda7ee77 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -56,6 +56,8 @@
 
 #define EV_REGISTER_THRESHOLD		0x40
 #define EV_REGISTER_GAIN		0x41
+#define EV_REGISTER_OFFSET_Y		0x45
+#define EV_REGISTER_OFFSET_X		0x46
 
 #define NO_REGISTER			0xff
 
@@ -86,6 +88,8 @@ struct edt_reg_addr {
 	int reg_report_rate;
 	int reg_gain;
 	int reg_offset;
+	int reg_offset_x;
+	int reg_offset_y;
 	int reg_num_x;
 	int reg_num_y;
 };
@@ -111,6 +115,8 @@ struct edt_ft5x06_ts_data {
 	int threshold;
 	int gain;
 	int offset;
+	int offset_x;
+	int offset_y;
 	int report_rate;
 	int max_support_points;
 
@@ -508,6 +514,12 @@ static EDT_ATTR(gain, S_IWUSR | S_IRUGO, WORK_REGISTER_GAIN,
 /* m06, m09: range 0-31, m12: range 0-16 */
 static EDT_ATTR(offset, S_IWUSR | S_IRUGO, WORK_REGISTER_OFFSET,
 		M09_REGISTER_OFFSET, NO_REGISTER, 0, 31);
+/* m06, m09, m12: no supported, ev_ft: range 0-80 */
+static EDT_ATTR(offset_x, S_IWUSR | S_IRUGO, NO_REGISTER, NO_REGISTER,
+		EV_REGISTER_OFFSET_X, 0, 80);
+/* m06, m09, m12: no supported, ev_ft: range 0-80 */
+static EDT_ATTR(offset_y, S_IWUSR | S_IRUGO, NO_REGISTER, NO_REGISTER,
+		EV_REGISTER_OFFSET_Y, 0, 80);
 /* m06: range 20 to 80, m09: range 0 to 30, m12: range 1 to 255... */
 static EDT_ATTR(threshold, S_IWUSR | S_IRUGO, WORK_REGISTER_THRESHOLD,
 		M09_REGISTER_THRESHOLD, EV_REGISTER_THRESHOLD, 0, 255);
@@ -518,6 +530,8 @@ static EDT_ATTR(report_rate, S_IWUSR | S_IRUGO, WORK_REGISTER_REPORT_RATE,
 static struct attribute *edt_ft5x06_attrs[] = {
 	&edt_ft5x06_attr_gain.dattr.attr,
 	&edt_ft5x06_attr_offset.dattr.attr,
+	&edt_ft5x06_attr_offset_x.dattr.attr,
+	&edt_ft5x06_attr_offset_y.dattr.attr,
 	&edt_ft5x06_attr_threshold.dattr.attr,
 	&edt_ft5x06_attr_report_rate.dattr.attr,
 	NULL
@@ -632,6 +646,12 @@ static int edt_ft5x06_work_mode(struct edt_ft5x06_ts_data *tsdata)
 	if (reg_addr->reg_offset != NO_REGISTER)
 		edt_ft5x06_register_write(tsdata, reg_addr->reg_offset,
 					  tsdata->offset);
+	if (reg_addr->reg_offset_x != NO_REGISTER)
+		edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_x,
+					  tsdata->offset_x);
+	if (reg_addr->reg_offset_y != NO_REGISTER)
+		edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_y,
+					  tsdata->offset_y);
 	if (reg_addr->reg_report_rate != NO_REGISTER)
 		edt_ft5x06_register_write(tsdata, reg_addr->reg_report_rate,
 				  tsdata->report_rate);
@@ -937,6 +957,18 @@ static void edt_ft5x06_ts_get_defaults(struct device *dev,
 		edt_ft5x06_register_write(tsdata, reg_addr->reg_offset, val);
 		tsdata->offset = val;
 	}
+
+	error = device_property_read_u32(dev, "offset-x", &val);
+	if (!error) {
+		edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_x, val);
+		tsdata->offset_x = val;
+	}
+
+	error = device_property_read_u32(dev, "offset-y", &val);
+	if (!error) {
+		edt_ft5x06_register_write(tsdata, reg_addr->reg_offset_y, val);
+		tsdata->offset_y = val;
+	}
 }
 
 static void
@@ -950,6 +982,12 @@ edt_ft5x06_ts_get_parameters(struct edt_ft5x06_ts_data *tsdata)
 	if (reg_addr->reg_offset != NO_REGISTER)
 		tsdata->offset =
 			edt_ft5x06_register_read(tsdata, reg_addr->reg_offset);
+	if (reg_addr->reg_offset_x != NO_REGISTER)
+		tsdata->offset_x = edt_ft5x06_register_read(tsdata,
+						reg_addr->reg_offset_x);
+	if (reg_addr->reg_offset_y != NO_REGISTER)
+		tsdata->offset_y = edt_ft5x06_register_read(tsdata,
+						reg_addr->reg_offset_y);
 	if (reg_addr->reg_report_rate != NO_REGISTER)
 		tsdata->report_rate = edt_ft5x06_register_read(tsdata,
 						reg_addr->reg_report_rate);
@@ -977,6 +1015,8 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata)
 		reg_addr->reg_report_rate = WORK_REGISTER_REPORT_RATE;
 		reg_addr->reg_gain = WORK_REGISTER_GAIN;
 		reg_addr->reg_offset = WORK_REGISTER_OFFSET;
+		reg_addr->reg_offset_x = NO_REGISTER;
+		reg_addr->reg_offset_y = NO_REGISTER;
 		reg_addr->reg_num_x = WORK_REGISTER_NUM_X;
 		reg_addr->reg_num_y = WORK_REGISTER_NUM_Y;
 		break;
@@ -987,6 +1027,8 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata)
 		reg_addr->reg_report_rate = NO_REGISTER;
 		reg_addr->reg_gain = M09_REGISTER_GAIN;
 		reg_addr->reg_offset = M09_REGISTER_OFFSET;
+		reg_addr->reg_offset_x = NO_REGISTER;
+		reg_addr->reg_offset_y = NO_REGISTER;
 		reg_addr->reg_num_x = M09_REGISTER_NUM_X;
 		reg_addr->reg_num_y = M09_REGISTER_NUM_Y;
 		break;
@@ -995,6 +1037,8 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata)
 		reg_addr->reg_threshold = EV_REGISTER_THRESHOLD;
 		reg_addr->reg_gain = EV_REGISTER_GAIN;
 		reg_addr->reg_offset = NO_REGISTER;
+		reg_addr->reg_offset_x = EV_REGISTER_OFFSET_X;
+		reg_addr->reg_offset_y = EV_REGISTER_OFFSET_Y;
 		reg_addr->reg_num_x = NO_REGISTER;
 		reg_addr->reg_num_y = NO_REGISTER;
 		reg_addr->reg_report_rate = NO_REGISTER;
@@ -1005,6 +1049,8 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata)
 		reg_addr->reg_threshold = M09_REGISTER_THRESHOLD;
 		reg_addr->reg_gain = M09_REGISTER_GAIN;
 		reg_addr->reg_offset = M09_REGISTER_OFFSET;
+		reg_addr->reg_offset_x = NO_REGISTER;
+		reg_addr->reg_offset_y = NO_REGISTER;
 		break;
 	}
 }
-- 
cgit v1.2.3-59-g8ed1b


From 351e0592bfeae58c76a11bdcec59eb78b2937593 Mon Sep 17 00:00:00 2001
From: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Date: Mon, 28 Jan 2019 10:38:10 -0800
Subject: Input: st1232 - add support for st1633

Add support for the Sitronix ST1633 touchscreen controller to the st1232
driver. A protocol spec can be found here:
www.ampdisplay.com/documents/pdf/AM-320480B6TZQW-TC0H.pdf

Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../bindings/input/touchscreen/sitronix-st1232.txt |   6 +-
 drivers/input/touchscreen/Kconfig                  |   6 +-
 drivers/input/touchscreen/st1232.c                 | 120 +++++++++++++++------
 3 files changed, 93 insertions(+), 39 deletions(-)

(limited to 'Documentation')

diff --git a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt
index 64ad48b824a2..e73e826e0f2a 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt
@@ -1,7 +1,9 @@
-* Sitronix st1232 touchscreen controller
+* Sitronix st1232 or st1633 touchscreen controller
 
 Required properties:
-- compatible: must be "sitronix,st1232"
+- compatible: must contain one of
+  * "sitronix,st1232"
+  * "sitronix,st1633"
 - reg: I2C address of the chip
 - interrupts: interrupt to which the chip is connected
 
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index af6027cc7bbf..6c16aaeb4191 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -1168,11 +1168,11 @@ config TOUCHSCREEN_SIS_I2C
 	  module will be called sis_i2c.
 
 config TOUCHSCREEN_ST1232
-	tristate "Sitronix ST1232 touchscreen controllers"
+	tristate "Sitronix ST1232 or ST1633 touchscreen controllers"
 	depends on I2C
 	help
-	  Say Y here if you want to support Sitronix ST1232
-	  touchscreen controller.
+	  Say Y here if you want to support the Sitronix ST1232
+	  or ST1633 touchscreen controller.
 
 	  If unsure, say N.
 
diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c
index 11ff32c68025..777df903605d 100644
--- a/drivers/input/touchscreen/st1232.c
+++ b/drivers/input/touchscreen/st1232.c
@@ -23,13 +23,7 @@
 #include <linux/types.h>
 
 #define ST1232_TS_NAME	"st1232-ts"
-
-#define MIN_X		0x00
-#define MIN_Y		0x00
-#define MAX_X		0x31f	/* (800 - 1) */
-#define MAX_Y		0x1df	/* (480 - 1) */
-#define MAX_AREA	0xff
-#define MAX_FINGERS	2
+#define ST1633_TS_NAME	"st1633-ts"
 
 struct st1232_ts_finger {
 	u16 x;
@@ -38,12 +32,24 @@ struct st1232_ts_finger {
 	bool is_valid;
 };
 
+struct st_chip_info {
+	bool	have_z;
+	u16	max_x;
+	u16	max_y;
+	u16	max_area;
+	u16	max_fingers;
+	u8	start_reg;
+};
+
 struct st1232_ts_data {
 	struct i2c_client *client;
 	struct input_dev *input_dev;
-	struct st1232_ts_finger finger[MAX_FINGERS];
 	struct dev_pm_qos_request low_latency_req;
 	int reset_gpio;
+	const struct st_chip_info *chip_info;
+	int read_buf_len;
+	u8 *read_buf;
+	struct st1232_ts_finger *finger;
 };
 
 static int st1232_ts_read_data(struct st1232_ts_data *ts)
@@ -52,40 +58,35 @@ static int st1232_ts_read_data(struct st1232_ts_data *ts)
 	struct i2c_client *client = ts->client;
 	struct i2c_msg msg[2];
 	int error;
-	u8 start_reg;
-	u8 buf[10];
+	int i, y;
+	u8 start_reg = ts->chip_info->start_reg;
+	u8 *buf = ts->read_buf;
 
-	/* read touchscreen data from ST1232 */
+	/* read touchscreen data */
 	msg[0].addr = client->addr;
 	msg[0].flags = 0;
 	msg[0].len = 1;
 	msg[0].buf = &start_reg;
-	start_reg = 0x10;
 
 	msg[1].addr = ts->client->addr;
 	msg[1].flags = I2C_M_RD;
-	msg[1].len = sizeof(buf);
+	msg[1].len = ts->read_buf_len;
 	msg[1].buf = buf;
 
 	error = i2c_transfer(client->adapter, msg, 2);
 	if (error < 0)
 		return error;
 
-	/* get "valid" bits */
-	finger[0].is_valid = buf[2] >> 7;
-	finger[1].is_valid = buf[5] >> 7;
-
-	/* get xy coordinate */
-	if (finger[0].is_valid) {
-		finger[0].x = ((buf[2] & 0x0070) << 4) | buf[3];
-		finger[0].y = ((buf[2] & 0x0007) << 8) | buf[4];
-		finger[0].t = buf[8];
-	}
+	for (i = 0, y = 0; i < ts->chip_info->max_fingers; i++, y += 3) {
+		finger[i].is_valid = buf[i + y] >> 7;
+		if (finger[i].is_valid) {
+			finger[i].x = ((buf[i + y] & 0x0070) << 4) | buf[i + 1];
+			finger[i].y = ((buf[i + y] & 0x0007) << 8) | buf[i + 2];
 
-	if (finger[1].is_valid) {
-		finger[1].x = ((buf[5] & 0x0070) << 4) | buf[6];
-		finger[1].y = ((buf[5] & 0x0007) << 8) | buf[7];
-		finger[1].t = buf[9];
+			/* st1232 includes a z-axis / touch strength */
+			if (ts->chip_info->have_z)
+				finger[i].t = buf[i + 6];
+		}
 	}
 
 	return 0;
@@ -104,11 +105,14 @@ static irqreturn_t st1232_ts_irq_handler(int irq, void *dev_id)
 		goto end;
 
 	/* multi touch protocol */
-	for (i = 0; i < MAX_FINGERS; i++) {
+	for (i = 0; i < ts->chip_info->max_fingers; i++) {
 		if (!finger[i].is_valid)
 			continue;
 
-		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, finger[i].t);
+		if (ts->chip_info->have_z)
+			input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR,
+					 finger[i].t);
+
 		input_report_abs(input_dev, ABS_MT_POSITION_X, finger[i].x);
 		input_report_abs(input_dev, ABS_MT_POSITION_Y, finger[i].y);
 		input_mt_sync(input_dev);
@@ -142,13 +146,41 @@ static void st1232_ts_power(struct st1232_ts_data *ts, bool poweron)
 		gpio_direction_output(ts->reset_gpio, poweron);
 }
 
+static const struct st_chip_info st1232_chip_info = {
+	.have_z		= true,
+	.max_x		= 0x31f, /* 800 - 1 */
+	.max_y		= 0x1df, /* 480 -1 */
+	.max_area	= 0xff,
+	.max_fingers	= 2,
+	.start_reg	= 0x12,
+};
+
+static const struct st_chip_info st1633_chip_info = {
+	.have_z		= false,
+	.max_x		= 0x13f, /* 320 - 1 */
+	.max_y		= 0x1df, /* 480 -1 */
+	.max_area	= 0x00,
+	.max_fingers	= 5,
+	.start_reg	= 0x12,
+};
+
 static int st1232_ts_probe(struct i2c_client *client,
 			   const struct i2c_device_id *id)
 {
+	const struct st_chip_info *match;
 	struct st1232_ts_data *ts;
+	struct st1232_ts_finger *finger;
 	struct input_dev *input_dev;
 	int error;
 
+	match = device_get_match_data(&client->dev);
+	if (!match && id)
+		match = (const void *)id->driver_data;
+	if (!match) {
+		dev_err(&client->dev, "unknown device model\n");
+		return -ENODEV;
+	}
+
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
 		dev_err(&client->dev, "need I2C_FUNC_I2C\n");
 		return -EIO;
@@ -163,6 +195,19 @@ static int st1232_ts_probe(struct i2c_client *client,
 	if (!ts)
 		return -ENOMEM;
 
+	ts->chip_info = match;
+	ts->finger = devm_kcalloc(&client->dev,
+				  ts->chip_info->max_fingers, sizeof(*finger),
+				  GFP_KERNEL);
+	if (!ts->finger)
+		return -ENOMEM;
+
+	/* allocate a buffer according to the number of registers to read */
+	ts->read_buf_len = ts->chip_info->max_fingers * 4;
+	ts->read_buf = devm_kzalloc(&client->dev, ts->read_buf_len, GFP_KERNEL);
+	if (!ts->read_buf)
+		return -ENOMEM;
+
 	input_dev = devm_input_allocate_device(&client->dev);
 	if (!input_dev)
 		return -ENOMEM;
@@ -192,9 +237,14 @@ static int st1232_ts_probe(struct i2c_client *client,
 	__set_bit(EV_KEY, input_dev->evbit);
 	__set_bit(EV_ABS, input_dev->evbit);
 
-	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0);
-	input_set_abs_params(input_dev, ABS_MT_POSITION_X, MIN_X, MAX_X, 0, 0);
-	input_set_abs_params(input_dev, ABS_MT_POSITION_Y, MIN_Y, MAX_Y, 0, 0);
+	if (ts->chip_info->have_z)
+		input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0,
+				     ts->chip_info->max_area, 0, 0);
+
+	input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+			     0, ts->chip_info->max_x, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+			     0, ts->chip_info->max_y, 0, 0);
 
 	error = devm_request_threaded_irq(&client->dev, client->irq,
 					  NULL, st1232_ts_irq_handler,
@@ -261,13 +311,15 @@ static SIMPLE_DEV_PM_OPS(st1232_ts_pm_ops,
 			 st1232_ts_suspend, st1232_ts_resume);
 
 static const struct i2c_device_id st1232_ts_id[] = {
-	{ ST1232_TS_NAME, 0 },
+	{ ST1232_TS_NAME, (unsigned long)&st1232_chip_info },
+	{ ST1633_TS_NAME, (unsigned long)&st1633_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, st1232_ts_id);
 
 static const struct of_device_id st1232_ts_dt_ids[] = {
-	{ .compatible = "sitronix,st1232", },
+	{ .compatible = "sitronix,st1232", .data = &st1232_chip_info },
+	{ .compatible = "sitronix,st1633", .data = &st1633_chip_info },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, st1232_ts_dt_ids);
-- 
cgit v1.2.3-59-g8ed1b


From c3a39380a39df3750149a2f4699c1c241a0e6ea2 Mon Sep 17 00:00:00 2001
From: Richard Leitner <richard.leitner@skidata.com>
Date: Mon, 28 Jan 2019 14:49:37 -0800
Subject: Input: sx8654 - add reset-gpio support

The sx8654 features a NRST input which may be connected to a GPIO.
Therefore add support for hard-resetting the sx8654 via this NRST.

If the reset-gpio property is provided the sx8654 is resetted via NRST
instead of the soft-reset via I2C.

Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../bindings/input/touchscreen/sx8654.txt          |  4 ++
 drivers/input/touchscreen/sx8654.c                 | 44 +++++++++++++++++++---
 2 files changed, 42 insertions(+), 6 deletions(-)

(limited to 'Documentation')

diff --git a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
index 4886c4aa2906..ca521d8f7d65 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
@@ -5,6 +5,9 @@ Required properties:
 - reg: i2c slave address
 - interrupts: touch controller interrupt
 
+Optional properties:
+ - reset-gpios: GPIO specification for the NRST input
+
 Example:
 
 	sx8654@48 {
@@ -12,4 +15,5 @@ Example:
 		reg = <0x48>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
 	};
diff --git a/drivers/input/touchscreen/sx8654.c b/drivers/input/touchscreen/sx8654.c
index ed29db3ec731..ab5cbf7e0879 100644
--- a/drivers/input/touchscreen/sx8654.c
+++ b/drivers/input/touchscreen/sx8654.c
@@ -27,12 +27,14 @@
  *  published by the Free Software Foundation.
  */
 
-#include <linux/input.h>
-#include <linux/module.h>
-#include <linux/of.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
+#include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of.h>
 
 /* register addresses */
 #define I2C_REG_TOUCH0			0x00
@@ -74,6 +76,7 @@
 struct sx8654 {
 	struct input_dev *input;
 	struct i2c_client *client;
+	struct gpio_desc *gpio_reset;
 };
 
 static irqreturn_t sx8654_irq(int irq, void *handle)
@@ -124,6 +127,25 @@ out:
 	return IRQ_HANDLED;
 }
 
+static int sx8654_reset(struct sx8654 *ts)
+{
+	int err;
+
+	if (ts->gpio_reset) {
+		gpiod_set_value_cansleep(ts->gpio_reset, 1);
+		udelay(2); /* Tpulse > 1µs */
+		gpiod_set_value_cansleep(ts->gpio_reset, 0);
+	} else {
+		dev_dbg(&ts->client->dev, "NRST unavailable, try softreset\n");
+		err = i2c_smbus_write_byte_data(ts->client, I2C_REG_SOFTRESET,
+						SOFTRESET_VALUE);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
 static int sx8654_open(struct input_dev *dev)
 {
 	struct sx8654 *sx8654 = input_get_drvdata(dev);
@@ -186,6 +208,17 @@ static int sx8654_probe(struct i2c_client *client,
 	if (!sx8654)
 		return -ENOMEM;
 
+	sx8654->gpio_reset = devm_gpiod_get_optional(&client->dev, "reset",
+						     GPIOD_OUT_HIGH);
+	if (IS_ERR(sx8654->gpio_reset)) {
+		error = PTR_ERR(sx8654->gpio_reset);
+		if (error != -EPROBE_DEFER)
+			dev_err(&client->dev, "unable to get reset-gpio: %d\n",
+				error);
+		return error;
+	}
+	dev_dbg(&client->dev, "got GPIO reset pin\n");
+
 	input = devm_input_allocate_device(&client->dev);
 	if (!input)
 		return -ENOMEM;
@@ -206,10 +239,9 @@ static int sx8654_probe(struct i2c_client *client,
 
 	input_set_drvdata(sx8654->input, sx8654);
 
-	error = i2c_smbus_write_byte_data(client, I2C_REG_SOFTRESET,
-					  SOFTRESET_VALUE);
+	error = sx8654_reset(sx8654);
 	if (error) {
-		dev_err(&client->dev, "writing softreset value failed");
+		dev_err(&client->dev, "reset failed");
 		return error;
 	}
 
-- 
cgit v1.2.3-59-g8ed1b


From 5896756a70b2f1d476d5cf2e174c1675ff0d9e8b Mon Sep 17 00:00:00 2001
From: Richard Leitner <richard.leitner@skidata.com>
Date: Mon, 28 Jan 2019 14:54:04 -0800
Subject: Input: sx8654 - add sx8655 and sx8656 to compatibles

As the sx865[456] share the same datasheet and differ only in the
presence of a "capacitive proximity detection circuit" and a "haptics
motor driver for LRA/ERM" add them to the compatbiles. As the driver
doesn't implement these features it should be no problem.

Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 Documentation/devicetree/bindings/input/touchscreen/sx8654.txt | 5 ++++-
 drivers/input/touchscreen/sx8654.c                             | 4 ++++
 2 files changed, 8 insertions(+), 1 deletion(-)

(limited to 'Documentation')

diff --git a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
index ca521d8f7d65..a538678424dd 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
@@ -1,7 +1,10 @@
 * Semtech SX8654 I2C Touchscreen Controller
 
 Required properties:
-- compatible: must be "semtech,sx8654"
+- compatible: must be one of the following, depending on the model:
+	"semtech,sx8654"
+	"semtech,sx8655"
+	"semtech,sx8656"
 - reg: i2c slave address
 - interrupts: touch controller interrupt
 
diff --git a/drivers/input/touchscreen/sx8654.c b/drivers/input/touchscreen/sx8654.c
index ab5cbf7e0879..9e1777ed93a7 100644
--- a/drivers/input/touchscreen/sx8654.c
+++ b/drivers/input/touchscreen/sx8654.c
@@ -291,6 +291,8 @@ static int sx8654_probe(struct i2c_client *client,
 #ifdef CONFIG_OF
 static const struct of_device_id sx8654_of_match[] = {
 	{ .compatible = "semtech,sx8654", },
+	{ .compatible = "semtech,sx8655", },
+	{ .compatible = "semtech,sx8656", },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, sx8654_of_match);
@@ -298,6 +300,8 @@ MODULE_DEVICE_TABLE(of, sx8654_of_match);
 
 static const struct i2c_device_id sx8654_id_table[] = {
 	{ "semtech_sx8654", 0 },
+	{ "semtech_sx8655", 0 },
+	{ "semtech_sx8656", 0 },
 	{ },
 };
 MODULE_DEVICE_TABLE(i2c, sx8654_id_table);
-- 
cgit v1.2.3-59-g8ed1b


From 43df039c6d92266d6e023f7eb23aeb6511934f20 Mon Sep 17 00:00:00 2001
From: Richard Leitner <richard.leitner@skidata.com>
Date: Mon, 28 Jan 2019 14:58:27 -0800
Subject: Input: sx8654 - add sx8650 support

The sx8654 and sx8650 are quite similar, therefore add support for the
sx8650 within the sx8654 driver.

Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Reviewed-by: Rob Herring <robh@kernel.org>
[dtor: use __be16 in sx8650_irq, add missing del_timer_sync]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../bindings/input/touchscreen/sx8654.txt          |   1 +
 drivers/input/touchscreen/sx8654.c                 | 196 ++++++++++++++++++---
 2 files changed, 177 insertions(+), 20 deletions(-)

(limited to 'Documentation')

diff --git a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
index a538678424dd..0ebe6dd043c7 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
@@ -2,6 +2,7 @@
 
 Required properties:
 - compatible: must be one of the following, depending on the model:
+	"semtech,sx8650"
 	"semtech,sx8654"
 	"semtech,sx8655"
 	"semtech,sx8656"
diff --git a/drivers/input/touchscreen/sx8654.c b/drivers/input/touchscreen/sx8654.c
index 9e1777ed93a7..5f5af8eaecea 100644
--- a/drivers/input/touchscreen/sx8654.c
+++ b/drivers/input/touchscreen/sx8654.c
@@ -44,9 +44,11 @@
 #define I2C_REG_IRQSRC			0x23
 #define I2C_REG_SOFTRESET		0x3f
 
+#define I2C_REG_SX8650_STAT		0x05
+#define SX8650_STAT_CONVIRQ		0x80
+
 /* commands */
 #define CMD_READ_REGISTER		0x40
-#define CMD_MANUAL			0xc0
 #define CMD_PENTRG			0xe0
 
 /* value for I2C_REG_SOFTRESET */
@@ -58,6 +60,7 @@
 
 /* bits for RegTouch1 */
 #define CONDIRQ				0x20
+#define RPDNT_100K			0x00
 #define FILT_7SA			0x03
 
 /* bits for I2C_REG_CHANMASK */
@@ -71,14 +74,121 @@
 /* power delay: lower nibble of CTRL0 register */
 #define POWDLY_1_1MS			0x0b
 
+/* for sx8650, as we have no pen release IRQ there: timeout in ns following the
+ * last PENIRQ after which we assume the pen is lifted.
+ */
+#define SX8650_PENIRQ_TIMEOUT		msecs_to_jiffies(10)
+
 #define MAX_12BIT			((1 << 12) - 1)
+#define MAX_I2C_READ_LEN		10 /* see datasheet section 5.1.5 */
+
+/* channel definition */
+#define CH_X				0x00
+#define CH_Y				0x01
+
+struct sx865x_data {
+	u8 cmd_manual;
+	u8 chan_mask;
+	bool has_irq_penrelease;
+	bool has_reg_irqmask;
+	irq_handler_t irqh;
+};
 
 struct sx8654 {
 	struct input_dev *input;
 	struct i2c_client *client;
 	struct gpio_desc *gpio_reset;
+
+	spinlock_t lock;	/* for input reporting from irq/timer */
+	struct timer_list timer;
+
+	const struct sx865x_data *data;
 };
 
+static inline void sx865x_penrelease(struct sx8654 *ts)
+{
+	struct input_dev *input_dev = ts->input;
+
+	input_report_key(input_dev, BTN_TOUCH, 0);
+	input_sync(input_dev);
+}
+
+static void sx865x_penrelease_timer_handler(struct timer_list *t)
+{
+	struct sx8654 *ts = from_timer(ts, t, timer);
+	unsigned long flags;
+
+	spin_lock_irqsave(&ts->lock, flags);
+	sx865x_penrelease(ts);
+	spin_unlock_irqrestore(&ts->lock, flags);
+	dev_dbg(&ts->client->dev, "penrelease by timer\n");
+}
+
+static irqreturn_t sx8650_irq(int irq, void *handle)
+{
+	struct sx8654 *ts = handle;
+	struct device *dev = &ts->client->dev;
+	int len, i;
+	unsigned long flags;
+	u8 stat;
+	u16 x, y;
+	u16 ch;
+	u16 chdata;
+	__be16 data[MAX_I2C_READ_LEN / sizeof(__be16)];
+	u8 nchan = hweight32(ts->data->chan_mask);
+	u8 readlen = nchan * sizeof(*data);
+
+	stat = i2c_smbus_read_byte_data(ts->client, CMD_READ_REGISTER
+						    | I2C_REG_SX8650_STAT);
+
+	if (!(stat & SX8650_STAT_CONVIRQ)) {
+		dev_dbg(dev, "%s ignore stat [0x%02x]", __func__, stat);
+		return IRQ_HANDLED;
+	}
+
+	len = i2c_master_recv(ts->client, (u8 *)data, readlen);
+	if (len != readlen) {
+		dev_dbg(dev, "ignore short recv (%d)\n", len);
+		return IRQ_HANDLED;
+	}
+
+	spin_lock_irqsave(&ts->lock, flags);
+
+	x = 0;
+	y = 0;
+	for (i = 0; i < nchan; i++) {
+		chdata = be16_to_cpu(data[i]);
+
+		if (unlikely(chdata == 0xFFFF)) {
+			dev_dbg(dev, "invalid qualified data @ %d\n", i);
+			continue;
+		} else if (unlikely(chdata & 0x8000)) {
+			dev_warn(dev, "hibit @ %d [0x%04x]\n", i, chdata);
+			continue;
+		}
+
+		ch = chdata >> 12;
+		if (ch == CH_X)
+			x = chdata & MAX_12BIT;
+		else if (ch == CH_Y)
+			y = chdata & MAX_12BIT;
+		else
+			dev_warn(dev, "unknown channel %d [0x%04x]\n", ch,
+				 chdata);
+	}
+
+	input_report_abs(ts->input, ABS_X, x);
+	input_report_abs(ts->input, ABS_Y, y);
+	input_report_key(ts->input, BTN_TOUCH, 1);
+	input_sync(ts->input);
+	dev_dbg(dev, "point(%4d,%4d)\n", x, y);
+
+	mod_timer(&ts->timer, jiffies + SX8650_PENIRQ_TIMEOUT);
+	spin_unlock_irqrestore(&ts->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
 static irqreturn_t sx8654_irq(int irq, void *handle)
 {
 	struct sx8654 *sx8654 = handle;
@@ -179,14 +289,17 @@ static void sx8654_close(struct input_dev *dev)
 
 	disable_irq(client->irq);
 
+	if (!sx8654->data->has_irq_penrelease)
+		del_timer_sync(&sx8654->timer);
+
 	/* enable manual mode mode */
-	error = i2c_smbus_write_byte(client, CMD_MANUAL);
+	error = i2c_smbus_write_byte(client, sx8654->data->cmd_manual);
 	if (error) {
 		dev_err(&client->dev, "writing command CMD_MANUAL failed");
 		return;
 	}
 
-	error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0, 0);
+	error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0, RATE_MANUAL);
 	if (error) {
 		dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed");
 		return;
@@ -219,6 +332,20 @@ static int sx8654_probe(struct i2c_client *client,
 	}
 	dev_dbg(&client->dev, "got GPIO reset pin\n");
 
+	sx8654->data = device_get_match_data(&client->dev);
+	if (!sx8654->data)
+		sx8654->data = (const struct sx865x_data *)id->driver_data;
+	if (!sx8654->data) {
+		dev_err(&client->dev, "invalid or missing device data\n");
+		return -EINVAL;
+	}
+
+	if (!sx8654->data->has_irq_penrelease) {
+		dev_dbg(&client->dev, "use timer for penrelease\n");
+		timer_setup(&sx8654->timer, sx865x_penrelease_timer_handler, 0);
+		spin_lock_init(&sx8654->lock);
+	}
+
 	input = devm_input_allocate_device(&client->dev);
 	if (!input)
 		return -ENOMEM;
@@ -246,29 +373,31 @@ static int sx8654_probe(struct i2c_client *client,
 	}
 
 	error = i2c_smbus_write_byte_data(client, I2C_REG_CHANMASK,
-					  CONV_X | CONV_Y);
+					  sx8654->data->chan_mask);
 	if (error) {
 		dev_err(&client->dev, "writing to I2C_REG_CHANMASK failed");
 		return error;
 	}
 
-	error = i2c_smbus_write_byte_data(client, I2C_REG_IRQMASK,
-					  IRQ_PENTOUCH_TOUCHCONVDONE |
-						IRQ_PENRELEASE);
-	if (error) {
-		dev_err(&client->dev, "writing to I2C_REG_IRQMASK failed");
-		return error;
+	if (sx8654->data->has_reg_irqmask) {
+		error = i2c_smbus_write_byte_data(client, I2C_REG_IRQMASK,
+						  IRQ_PENTOUCH_TOUCHCONVDONE |
+							IRQ_PENRELEASE);
+		if (error) {
+			dev_err(&client->dev, "writing I2C_REG_IRQMASK failed");
+			return error;
+		}
 	}
 
 	error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH1,
-					  CONDIRQ | FILT_7SA);
+					  CONDIRQ | RPDNT_100K | FILT_7SA);
 	if (error) {
 		dev_err(&client->dev, "writing to I2C_REG_TOUCH1 failed");
 		return error;
 	}
 
 	error = devm_request_threaded_irq(&client->dev, client->irq,
-					  NULL, sx8654_irq,
+					  NULL, sx8654->data->irqh,
 					  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 					  client->name, sx8654);
 	if (error) {
@@ -288,21 +417,48 @@ static int sx8654_probe(struct i2c_client *client,
 	return 0;
 }
 
+static const struct sx865x_data sx8650_data = {
+	.cmd_manual		= 0xb0,
+	.has_irq_penrelease	= false,
+	.has_reg_irqmask	= false,
+	.chan_mask		= (CONV_X | CONV_Y),
+	.irqh			= sx8650_irq,
+};
+
+static const struct sx865x_data sx8654_data = {
+	.cmd_manual		= 0xc0,
+	.has_irq_penrelease	= true,
+	.has_reg_irqmask	= true,
+	.chan_mask		= (CONV_X | CONV_Y),
+	.irqh			= sx8654_irq,
+};
+
 #ifdef CONFIG_OF
 static const struct of_device_id sx8654_of_match[] = {
-	{ .compatible = "semtech,sx8654", },
-	{ .compatible = "semtech,sx8655", },
-	{ .compatible = "semtech,sx8656", },
-	{ },
+	{
+		.compatible = "semtech,sx8650",
+		.data = &sx8650_data,
+	}, {
+		.compatible = "semtech,sx8654",
+		.data = &sx8654_data,
+	}, {
+		.compatible = "semtech,sx8655",
+		.data = &sx8654_data,
+	}, {
+		.compatible = "semtech,sx8656",
+		.data = &sx8654_data,
+	},
+	{ }
 };
 MODULE_DEVICE_TABLE(of, sx8654_of_match);
 #endif
 
 static const struct i2c_device_id sx8654_id_table[] = {
-	{ "semtech_sx8654", 0 },
-	{ "semtech_sx8655", 0 },
-	{ "semtech_sx8656", 0 },
-	{ },
+	{ .name = "semtech_sx8650", .driver_data = (long)&sx8650_data },
+	{ .name = "semtech_sx8654", .driver_data = (long)&sx8654_data },
+	{ .name = "semtech_sx8655", .driver_data = (long)&sx8654_data },
+	{ .name = "semtech_sx8656", .driver_data = (long)&sx8654_data },
+	{ }
 };
 MODULE_DEVICE_TABLE(i2c, sx8654_id_table);
 
-- 
cgit v1.2.3-59-g8ed1b


From 0f681d09e66ea6833e6173180ff3892e9026ab71 Mon Sep 17 00:00:00 2001
From: Brian Masney <masneyb@onstation.org>
Date: Wed, 6 Feb 2019 09:49:41 -0800
Subject: Input: add new vibrator driver for various MSM SOCs

This patch adds a new vibrator driver that supports various Qualcomm
MSM SOCs. Driver was tested on a LG Nexus 5 (hammerhead) phone.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../devicetree/bindings/input/msm-vibrator.txt     |  36 +++
 drivers/input/misc/Kconfig                         |  10 +
 drivers/input/misc/Makefile                        |   1 +
 drivers/input/misc/msm-vibrator.c                  | 282 +++++++++++++++++++++
 4 files changed, 329 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/msm-vibrator.txt
 create mode 100644 drivers/input/misc/msm-vibrator.c

(limited to 'Documentation')

diff --git a/Documentation/devicetree/bindings/input/msm-vibrator.txt b/Documentation/devicetree/bindings/input/msm-vibrator.txt
new file mode 100644
index 000000000000..8dcf014ef2e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/msm-vibrator.txt
@@ -0,0 +1,36 @@
+* Device tree bindings for the Qualcomm MSM vibrator
+
+Required properties:
+
+  - compatible: Should be one of
+		"qcom,msm8226-vibrator"
+		"qcom,msm8974-vibrator"
+  - reg: the base address and length of the IO memory for the registers.
+  - pinctrl-names: set to default.
+  - pinctrl-0: phandles pointing to pin configuration nodes. See
+               Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+  - clock-names: set to pwm
+  - clocks: phandle of the clock. See
+            Documentation/devicetree/bindings/clock/clock-bindings.txt
+  - enable-gpios: GPIO that enables the vibrator.
+
+Optional properties:
+
+  - vcc-supply: phandle to the regulator that provides power to the sensor.
+
+Example from a LG Nexus 5 (hammerhead) phone:
+
+vibrator@fd8c3450 {
+	reg = <0xfd8c3450 0x400>;
+	compatible = "qcom,msm8974-vibrator";
+
+	vcc-supply = <&pm8941_l19>;
+
+	clocks = <&mmcc CAMSS_GP1_CLK>;
+	clock-names = "pwm";
+
+	enable-gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&vibrator_pin>;
+};
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index ca59a2be9bc5..e39aef84f357 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -117,6 +117,16 @@ config INPUT_E3X0_BUTTON
 	  To compile this driver as a module, choose M here: the
 	  module will be called e3x0_button.
 
+config INPUT_MSM_VIBRATOR
+	tristate "Qualcomm MSM vibrator driver"
+	select INPUT_FF_MEMLESS
+	help
+	  Support for the vibrator that is found on various Qualcomm MSM
+	  SOCs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called msm_vibrator.
+
 config INPUT_PCSPKR
 	tristate "PC Speaker support"
 	depends on PCSPKR_PLATFORM
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 9d0f9d1ff68f..96a6419cb1f2 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_INPUT_MAX8925_ONKEY)	+= max8925_onkey.o
 obj-$(CONFIG_INPUT_MAX8997_HAPTIC)	+= max8997_haptic.o
 obj-$(CONFIG_INPUT_MC13783_PWRBUTTON)	+= mc13783-pwrbutton.o
 obj-$(CONFIG_INPUT_MMA8450)		+= mma8450.o
+obj-$(CONFIG_INPUT_MSM_VIBRATOR)	+= msm-vibrator.o
 obj-$(CONFIG_INPUT_PALMAS_PWRBUTTON)	+= palmas-pwrbutton.o
 obj-$(CONFIG_INPUT_PCAP)		+= pcap_keys.o
 obj-$(CONFIG_INPUT_PCF50633_PMU)	+= pcf50633-input.o
diff --git a/drivers/input/misc/msm-vibrator.c b/drivers/input/misc/msm-vibrator.c
new file mode 100644
index 000000000000..c06941021447
--- /dev/null
+++ b/drivers/input/misc/msm-vibrator.c
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Qualcomm MSM vibrator driver
+ *
+ * Copyright (c) 2018 Brian Masney <masneyb@onstation.org>
+ *
+ * Based on qcom,pwm-vibrator.c from:
+ * Copyright (c) 2018 Jonathan Marek <jonathan@marek.ca>
+ *
+ * Based on msm_pwm_vibrator.c from downstream Android sources:
+ * Copyright (C) 2009-2014 LGE, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+#define REG_CMD_RCGR           0x00
+#define REG_CFG_RCGR           0x04
+#define REG_M                  0x08
+#define REG_N                  0x0C
+#define REG_D                  0x10
+#define REG_CBCR               0x24
+#define MMSS_CC_M_DEFAULT      1
+
+struct msm_vibrator {
+	struct input_dev *input;
+	struct mutex mutex;
+	struct work_struct worker;
+	void __iomem *base;
+	struct regulator *vcc;
+	struct clk *clk;
+	struct gpio_desc *enable_gpio;
+	u16 magnitude;
+	bool enabled;
+};
+
+static void msm_vibrator_write(struct msm_vibrator *vibrator, int offset,
+			       u32 value)
+{
+	writel(value, vibrator->base + offset);
+}
+
+static int msm_vibrator_start(struct msm_vibrator *vibrator)
+{
+	int d_reg_val, ret = 0;
+
+	mutex_lock(&vibrator->mutex);
+
+	if (!vibrator->enabled) {
+		ret = clk_set_rate(vibrator->clk, 24000);
+		if (ret) {
+			dev_err(&vibrator->input->dev,
+				"Failed to set clock rate: %d\n", ret);
+			goto unlock;
+		}
+
+		ret = clk_prepare_enable(vibrator->clk);
+		if (ret) {
+			dev_err(&vibrator->input->dev,
+				"Failed to enable clock: %d\n", ret);
+			goto unlock;
+		}
+
+		ret = regulator_enable(vibrator->vcc);
+		if (ret) {
+			dev_err(&vibrator->input->dev,
+				"Failed to enable regulator: %d\n", ret);
+			clk_disable(vibrator->clk);
+			goto unlock;
+		}
+
+		gpiod_set_value_cansleep(vibrator->enable_gpio, 1);
+
+		vibrator->enabled = true;
+	}
+
+	d_reg_val = 127 - ((126 * vibrator->magnitude) / 0xffff);
+	msm_vibrator_write(vibrator, REG_CFG_RCGR,
+			   (2 << 12) | /* dual edge mode */
+			   (0 << 8) |  /* cxo */
+			   (7 << 0));
+	msm_vibrator_write(vibrator, REG_M, 1);
+	msm_vibrator_write(vibrator, REG_N, 128);
+	msm_vibrator_write(vibrator, REG_D, d_reg_val);
+	msm_vibrator_write(vibrator, REG_CMD_RCGR, 1);
+	msm_vibrator_write(vibrator, REG_CBCR, 1);
+
+unlock:
+	mutex_unlock(&vibrator->mutex);
+
+	return ret;
+}
+
+static void msm_vibrator_stop(struct msm_vibrator *vibrator)
+{
+	mutex_lock(&vibrator->mutex);
+
+	if (vibrator->enabled) {
+		gpiod_set_value_cansleep(vibrator->enable_gpio, 0);
+		regulator_disable(vibrator->vcc);
+		clk_disable(vibrator->clk);
+		vibrator->enabled = false;
+	}
+
+	mutex_unlock(&vibrator->mutex);
+}
+
+static void msm_vibrator_worker(struct work_struct *work)
+{
+	struct msm_vibrator *vibrator = container_of(work,
+						     struct msm_vibrator,
+						     worker);
+
+	if (vibrator->magnitude)
+		msm_vibrator_start(vibrator);
+	else
+		msm_vibrator_stop(vibrator);
+}
+
+static int msm_vibrator_play_effect(struct input_dev *dev, void *data,
+				    struct ff_effect *effect)
+{
+	struct msm_vibrator *vibrator = input_get_drvdata(dev);
+
+	mutex_lock(&vibrator->mutex);
+
+	if (effect->u.rumble.strong_magnitude > 0)
+		vibrator->magnitude = effect->u.rumble.strong_magnitude;
+	else
+		vibrator->magnitude = effect->u.rumble.weak_magnitude;
+
+	mutex_unlock(&vibrator->mutex);
+
+	schedule_work(&vibrator->worker);
+
+	return 0;
+}
+
+static void msm_vibrator_close(struct input_dev *input)
+{
+	struct msm_vibrator *vibrator = input_get_drvdata(input);
+
+	cancel_work_sync(&vibrator->worker);
+	msm_vibrator_stop(vibrator);
+}
+
+static int msm_vibrator_probe(struct platform_device *pdev)
+{
+	struct msm_vibrator *vibrator;
+	struct resource *res;
+	int ret;
+
+	vibrator = devm_kzalloc(&pdev->dev, sizeof(*vibrator), GFP_KERNEL);
+	if (!vibrator)
+		return -ENOMEM;
+
+	vibrator->input = devm_input_allocate_device(&pdev->dev);
+	if (!vibrator->input)
+		return -ENOMEM;
+
+	vibrator->vcc = devm_regulator_get(&pdev->dev, "vcc");
+	if (IS_ERR(vibrator->vcc)) {
+		if (PTR_ERR(vibrator->vcc) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Failed to get regulator: %ld\n",
+				PTR_ERR(vibrator->vcc));
+		return PTR_ERR(vibrator->vcc);
+	}
+
+	vibrator->enable_gpio = devm_gpiod_get(&pdev->dev, "enable",
+					       GPIOD_OUT_LOW);
+	if (IS_ERR(vibrator->enable_gpio)) {
+		if (PTR_ERR(vibrator->enable_gpio) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Failed to get enable gpio: %ld\n",
+				PTR_ERR(vibrator->enable_gpio));
+		return PTR_ERR(vibrator->enable_gpio);
+	}
+
+	vibrator->clk = devm_clk_get(&pdev->dev, "pwm");
+	if (IS_ERR(vibrator->clk)) {
+		if (PTR_ERR(vibrator->clk) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Failed to lookup pwm clock: %ld\n",
+				PTR_ERR(vibrator->clk));
+		return PTR_ERR(vibrator->clk);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Failed to get platform resource\n");
+		return -ENODEV;
+	}
+
+	vibrator->base = devm_ioremap(&pdev->dev, res->start,
+				     resource_size(res));
+	if (!vibrator->base) {
+		dev_err(&pdev->dev, "Failed to iomap resource: %ld\n",
+			PTR_ERR(vibrator->base));
+		return -ENOMEM;
+	}
+
+	vibrator->enabled = false;
+	mutex_init(&vibrator->mutex);
+	INIT_WORK(&vibrator->worker, msm_vibrator_worker);
+
+	vibrator->input->name = "msm-vibrator";
+	vibrator->input->id.bustype = BUS_HOST;
+	vibrator->input->close = msm_vibrator_close;
+
+	input_set_drvdata(vibrator->input, vibrator);
+	input_set_capability(vibrator->input, EV_FF, FF_RUMBLE);
+
+	ret = input_ff_create_memless(vibrator->input, NULL,
+				      msm_vibrator_play_effect);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to create ff memless: %d", ret);
+		return ret;
+	}
+
+	ret = input_register_device(vibrator->input);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register input device: %d", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, vibrator);
+
+	return 0;
+}
+
+static int __maybe_unused msm_vibrator_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct msm_vibrator *vibrator = platform_get_drvdata(pdev);
+
+	cancel_work_sync(&vibrator->worker);
+
+	if (vibrator->enabled)
+		msm_vibrator_stop(vibrator);
+
+	return 0;
+}
+
+static int __maybe_unused msm_vibrator_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct msm_vibrator *vibrator = platform_get_drvdata(pdev);
+
+	if (vibrator->enabled)
+		msm_vibrator_start(vibrator);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(msm_vibrator_pm_ops, msm_vibrator_suspend,
+			 msm_vibrator_resume);
+
+static const struct of_device_id msm_vibrator_of_match[] = {
+	{ .compatible = "qcom,msm8226-vibrator" },
+	{ .compatible = "qcom,msm8974-vibrator" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, msm_vibrator_of_match);
+
+static struct platform_driver msm_vibrator_driver = {
+	.probe	= msm_vibrator_probe,
+	.driver	= {
+		.name = "msm-vibrator",
+		.pm = &msm_vibrator_pm_ops,
+		.of_match_table = of_match_ptr(msm_vibrator_of_match),
+	},
+};
+module_platform_driver(msm_vibrator_driver);
+
+MODULE_AUTHOR("Brian Masney <masneyb@onstation.org>");
+MODULE_DESCRIPTION("Qualcomm MSM vibrator driver");
+MODULE_LICENSE("GPL");
-- 
cgit v1.2.3-59-g8ed1b


From 41a852e002e65ab7a1e6841b485d72d022e95df2 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marex@denx.de>
Date: Wed, 6 Feb 2019 21:53:00 -0800
Subject: Input: ili210x - add DT binding document

Add DT binding document for the Ilitek ILI210x and ILI251x
touchscreen controllers.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../devicetree/bindings/input/ilitek,ili2xxx.txt   | 25 ++++++++++++++++++++++
 1 file changed, 25 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt

(limited to 'Documentation')

diff --git a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt b/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt
new file mode 100644
index 000000000000..b2a76301e632
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt
@@ -0,0 +1,25 @@
+Ilitek ILI210x/ILI251x touchscreen controller
+
+Required properties:
+- compatible:
+    ilitek,ili210x for ILI210x
+    ilitek,ili251x for ILI251x
+
+- reg: The I2C address of the device
+
+- interrupts: The sink for the touchscreen's IRQ output
+    See ../interrupt-controller/interrupts.txt
+
+Optional properties for main touchpad device:
+
+- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low)
+
+Example:
+
+	touchscreen@41 {
+		compatible = "ilitek,ili251x";
+		reg = <0x41>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
+	};
-- 
cgit v1.2.3-59-g8ed1b


From 16ab4f43eb953277e915115c1d811d2a518d6bf2 Mon Sep 17 00:00:00 2001
From: Matthias Fend <matthias.fend@wolfvision.net>
Date: Mon, 11 Feb 2019 00:30:26 -0800
Subject: Input: st1232 - handle common DT bindings

This is required to specify generic touchscreen properties via DT.

Signed-off-by: Matthias Fend <matthias.fend@wolfvision.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../devicetree/bindings/input/touchscreen/sitronix-st1232.txt     | 2 ++
 drivers/input/touchscreen/st1232.c                                | 8 ++++++--
 2 files changed, 8 insertions(+), 2 deletions(-)

(limited to 'Documentation')

diff --git a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt
index e73e826e0f2a..019373253b28 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt
@@ -10,6 +10,8 @@ Required properties:
 Optional properties:
 - gpios: a phandle to the reset GPIO
 
+For additional optional properties see: touchscreen.txt
+
 Example:
 
 	i2c@00000000 {
diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c
index 32819ee6ec4b..34923399ece4 100644
--- a/drivers/input/touchscreen/st1232.c
+++ b/drivers/input/touchscreen/st1232.c
@@ -20,6 +20,7 @@
 #include <linux/pm_qos.h>
 #include <linux/slab.h>
 #include <linux/types.h>
+#include <linux/input/touchscreen.h>
 
 #define ST1232_TS_NAME	"st1232-ts"
 #define ST1633_TS_NAME	"st1633-ts"
@@ -43,6 +44,7 @@ struct st_chip_info {
 struct st1232_ts_data {
 	struct i2c_client *client;
 	struct input_dev *input_dev;
+	struct touchscreen_properties prop;
 	struct dev_pm_qos_request low_latency_req;
 	struct gpio_desc *reset_gpio;
 	const struct st_chip_info *chip_info;
@@ -112,8 +114,8 @@ static irqreturn_t st1232_ts_irq_handler(int irq, void *dev_id)
 			input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR,
 					 finger[i].t);
 
-		input_report_abs(input_dev, ABS_MT_POSITION_X, finger[i].x);
-		input_report_abs(input_dev, ABS_MT_POSITION_Y, finger[i].y);
+		touchscreen_report_pos(input_dev, &ts->prop,
+					finger[i].x, finger[i].y, true);
 		input_mt_sync(input_dev);
 		count++;
 	}
@@ -243,6 +245,8 @@ static int st1232_ts_probe(struct i2c_client *client,
 	input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
 			     0, ts->chip_info->max_y, 0, 0);
 
+	touchscreen_parse_properties(input_dev, true, &ts->prop);
+
 	error = devm_request_threaded_irq(&client->dev, client->irq,
 					  NULL, st1232_ts_irq_handler,
 					  IRQF_ONESHOT,
-- 
cgit v1.2.3-59-g8ed1b


From 84ef1b339c2fa27e664657d2493601cc025cc9fa Mon Sep 17 00:00:00 2001
From: Guido Günther <agx@sigxcpu.org>
Date: Sat, 16 Feb 2019 23:03:13 -0800
Subject: Input: goodix - support Goodix gt5688
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

From what I've seen in vendor trees it's fine to treat this as gt1x¹.
Tested on the Purism Librem 5 Devkit (Rocktech JH057N00900 panel).

[1]: https://github.com/TadiT7/android_kernel_mtk-4.4/tree/master/drivers/input/touchscreen/mediatek/GT5688

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 Documentation/devicetree/bindings/input/touchscreen/goodix.txt | 1 +
 drivers/input/touchscreen/goodix.c                             | 2 ++
 2 files changed, 3 insertions(+)

(limited to 'Documentation')

diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
index f7e95c52f3c7..57d3d8870a09 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
@@ -3,6 +3,7 @@ Device tree bindings for Goodix GT9xx series touchscreen controller
 Required properties:
 
  - compatible		: Should be "goodix,gt1151"
+				 or "goodix,gt5688"
 				 or "goodix,gt911"
 				 or "goodix,gt9110"
 				 or "goodix,gt912"
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index f2d9c2c41885..47b1ced41576 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -216,6 +216,7 @@ static const struct goodix_chip_data *goodix_get_chip_data(u16 id)
 {
 	switch (id) {
 	case 1151:
+	case 5688:
 		return &gt1x_chip_data;
 
 	case 911:
@@ -942,6 +943,7 @@ MODULE_DEVICE_TABLE(acpi, goodix_acpi_match);
 #ifdef CONFIG_OF
 static const struct of_device_id goodix_of_match[] = {
 	{ .compatible = "goodix,gt1151" },
+	{ .compatible = "goodix,gt5688" },
 	{ .compatible = "goodix,gt911" },
 	{ .compatible = "goodix,gt9110" },
 	{ .compatible = "goodix,gt912" },
-- 
cgit v1.2.3-59-g8ed1b


From 1a3d1306ff3ea414309b1c282eba4ae2431ff4a2 Mon Sep 17 00:00:00 2001
From: Guido Günther <agx@sigxcpu.org>
Date: Sat, 16 Feb 2019 23:03:41 -0800
Subject: Input: goodix - refer to touchscreen.txt in device tree bindings
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Refer to touchscreen.txt for generic touch properties. This avoids
duplication and we're using the generic code to parse these in the
driver. While at that add touchscreen-size-{x,y} which are respected by
the driver as well.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../devicetree/bindings/input/touchscreen/goodix.txt        | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

(limited to 'Documentation')

diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
index 57d3d8870a09..8cf0b4d38a7e 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
@@ -19,11 +19,14 @@ Optional properties:
  - irq-gpios		: GPIO pin used for IRQ. The driver uses the
 			  interrupt gpio pin as output to reset the device.
  - reset-gpios		: GPIO pin used for reset
-
- - touchscreen-inverted-x  : X axis is inverted (boolean)
- - touchscreen-inverted-y  : Y axis is inverted (boolean)
- - touchscreen-swapped-x-y : X and Y axis are swapped (boolean)
-                             (swapping is done after inverting the axis)
+ - touchscreen-inverted-x
+ - touchscreen-inverted-y
+ - touchscreen-size-x
+ - touchscreen-size-y
+ - touchscreen-swapped-x-y
+
+The touchscreen-* properties are documented in touchscreen.txt in this
+directory.
 
 Example:
 
-- 
cgit v1.2.3-59-g8ed1b