From ac3e8ea1d3a6b204f78e2e828f85b15d25617515 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Fri, 2 Jan 2015 22:54:39 +0900 Subject: Documentation: devicetree: Fix double words in Doumentation/devicetree This patch fix multiple words such as "the the" and "which which" in Documentation/devicetree. Signed-off-by: Masanari Iida Signed-off-by: Jonathan Corbet --- Documentation/devicetree/bindings/arm/msm/timer.txt | 2 +- Documentation/devicetree/bindings/ata/cavium-compact-flash.txt | 2 +- Documentation/devicetree/bindings/c6x/dscr.txt | 2 +- Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt | 2 +- Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt | 2 +- Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt | 2 +- Documentation/devicetree/bindings/mtd/fsmc-nand.txt | 2 +- Documentation/devicetree/bindings/net/broadcom-systemport.txt | 2 +- Documentation/devicetree/bindings/power/rockchip-io-domain.txt | 2 +- Documentation/devicetree/overlay-notes.txt | 4 ++-- 10 files changed, 11 insertions(+), 11 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/arm/msm/timer.txt b/Documentation/devicetree/bindings/arm/msm/timer.txt index c6ef8f13dc7e..74607b6c1117 100644 --- a/Documentation/devicetree/bindings/arm/msm/timer.txt +++ b/Documentation/devicetree/bindings/arm/msm/timer.txt @@ -8,7 +8,7 @@ Properties: "qcom,kpss-timer" - krait subsystem "qcom,scss-timer" - scorpion subsystem -- interrupts : Interrupts for the the debug timer, the first general purpose +- interrupts : Interrupts for the debug timer, the first general purpose timer, and optionally a second general purpose timer in that order. diff --git a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt index 93986a5a8018..3bacc8e0931e 100644 --- a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt +++ b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt @@ -9,7 +9,7 @@ Properties: Compatibility with many Cavium evaluation boards. -- reg: The base address of the the CF chip select banks. Depending on +- reg: The base address of the CF chip select banks. Depending on the device configuration, there may be one or two banks. - cavium,bus-width: The width of the connection to the CF devices. Valid diff --git a/Documentation/devicetree/bindings/c6x/dscr.txt b/Documentation/devicetree/bindings/c6x/dscr.txt index b0e97144cfb1..92672235de57 100644 --- a/Documentation/devicetree/bindings/c6x/dscr.txt +++ b/Documentation/devicetree/bindings/c6x/dscr.txt @@ -12,7 +12,7 @@ configuration register for writes. These configuration register may be used to enable (and disable in some cases) SoC pin drivers, select peripheral clock sources (internal or pin), etc. In some cases, a configuration register is write once or the individual bits are write once. In addition to device config, -the DSCR block may provide registers which which are used to reset peripherals, +the DSCR block may provide registers which are used to reset peripherals, provide device ID information, provide ethernet MAC addresses, as well as other miscellaneous functions. diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt index df0f48bcf75a..f7e21b1c2a05 100644 --- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt +++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt @@ -1,6 +1,6 @@ * Renesas R-Car DMA Controller Device Tree bindings -Renesas R-Car Generation 2 SoCs have have multiple multi-channel DMA +Renesas R-Car Generation 2 SoCs have multiple multi-channel DMA controller instances named DMAC capable of serving multiple clients. Channels can be dedicated to specific clients or shared between a large number of clients. diff --git a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt index d63194a2c848..ada4e2973323 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt @@ -39,7 +39,7 @@ Optional Properties: - lines-initial-states: Bitmask that specifies the initial state of each line. When a bit is set to zero, the corresponding line will be initialized to the input (pulled-up) state. When the bit is set to one, the line will be - initialized the the low-level output state. If the property is not specified + initialized the low-level output state. If the property is not specified all lines will be initialized to the input state. The I/O expander can detect input state changes, and thus optionally act as diff --git a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt index d9ee909d2b78..d71258e2d456 100644 --- a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt +++ b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt @@ -59,7 +59,7 @@ Optional properties: Each child node represents one channel and has the following properties: Required properties: - * reg: Pair of pins the the channel is connected to. + * reg: Pair of pins the channel is connected to. 0: VP/VN 1: VAUXP[0]/VAUXN[0] 2: VAUXP[1]/VAUXN[1] diff --git a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt index ec42935f3908..5235cbc551b0 100644 --- a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt +++ b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt @@ -9,7 +9,7 @@ Required properties: Optional properties: - bank-width : Width (in bytes) of the device. If not present, the width defaults to 1 byte -- nand-skip-bbtscan: Indicates the the BBT scanning should be skipped +- nand-skip-bbtscan: Indicates the BBT scanning should be skipped - timings: array of 6 bytes for NAND timings. The meanings of these bytes are: byte 0 TCLR : CLE to RE delay in number of AHB clock cycles, only 4 bits diff --git a/Documentation/devicetree/bindings/net/broadcom-systemport.txt b/Documentation/devicetree/bindings/net/broadcom-systemport.txt index aa7ad622259d..877da34145b0 100644 --- a/Documentation/devicetree/bindings/net/broadcom-systemport.txt +++ b/Documentation/devicetree/bindings/net/broadcom-systemport.txt @@ -3,7 +3,7 @@ Required properties: - compatible: should be one of "brcm,systemport-v1.00" or "brcm,systemport" - reg: address and length of the register set for the device. -- interrupts: interrupts for the device, first cell must be for the the rx +- interrupts: interrupts for the device, first cell must be for the rx interrupts, and the second cell should be for the transmit queues. An optional third interrupt cell for Wake-on-LAN can be specified - local-mac-address: Ethernet MAC address (48 bits) of this adapter diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt index 6fbf6e7ecde6..8b70db103ca7 100644 --- a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt +++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt @@ -37,7 +37,7 @@ Required properties: You specify supplies using the standard regulator bindings by including -a phandle the the relevant regulator. All specified supplies must be able +a phandle the relevant regulator. All specified supplies must be able to report their voltage. The IO Voltage Domain for any non-specified supplies will be not be touched. diff --git a/Documentation/devicetree/overlay-notes.txt b/Documentation/devicetree/overlay-notes.txt index 30ae758e3eef..d418a6ce9812 100644 --- a/Documentation/devicetree/overlay-notes.txt +++ b/Documentation/devicetree/overlay-notes.txt @@ -10,7 +10,7 @@ How overlays work ----------------- A Device Tree's overlay purpose is to modify the kernel's live tree, and -have the modification affecting the state of the the kernel in a way that +have the modification affecting the state of the kernel in a way that is reflecting the changes. Since the kernel mainly deals with devices, any new device node that result in an active device should have it created while if the device node is either @@ -80,7 +80,7 @@ result in foo+bar.dts }; ---- foo+bar.dts ------------------------------------------------------------- -As a result of the the overlay, a new device node (bar) has been created +As a result of the overlay, a new device node (bar) has been created so a bar platform device will be registered and if a matching device driver is loaded the device will be created as expected. -- cgit v1.2.3-59-g8ed1b