From 3e5b08518f6aefad31dca975634c3133457928ff Mon Sep 17 00:00:00 2001 From: Sebastian Reichel Date: Mon, 4 Sep 2017 09:30:03 -0700 Subject: Input: add a driver for PWM controllable vibrators Provide a simple driver for PWM controllable vibrators. It will be used by Motorola Droid 4. Signed-off-by: Sebastian Reichel Acked-by: Rob Herring Signed-off-by: Dmitry Torokhov --- .../devicetree/bindings/input/pwm-vibrator.txt | 66 ++++++++++++++++++++++ 1 file changed, 66 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/pwm-vibrator.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.txt b/Documentation/devicetree/bindings/input/pwm-vibrator.txt new file mode 100644 index 000000000000..09145d18491d --- /dev/null +++ b/Documentation/devicetree/bindings/input/pwm-vibrator.txt @@ -0,0 +1,66 @@ +* PWM vibrator device tree bindings + +Registers a PWM device as vibrator. It is expected, that the vibrator's +strength increases based on the duty cycle of the enable PWM channel +(100% duty cycle meaning strongest vibration, 0% meaning no vibration). + +The binding supports an optional direction PWM channel, that can be +driven at fixed duty cycle. If available this is can be used to increase +the vibration effect of some devices. + +Required properties: +- compatible: should contain "pwm-vibrator" +- pwm-names: Should contain "enable" and optionally "direction" +- pwms: Should contain a PWM handle for each entry in pwm-names + +Optional properties: +- vcc-supply: Phandle for the regulator supplying power +- direction-duty-cycle-ns: Duty cycle of the direction PWM channel in + nanoseconds, defaults to 50% of the channel's + period. + +Example from Motorola Droid 4: + +&omap4_pmx_core { + vibrator_direction_pin: pinmux_vibrator_direction_pin { + pinctrl-single,pins = < + OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */ + >; + }; + + vibrator_enable_pin: pinmux_vibrator_enable_pin { + pinctrl-single,pins = < + OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */ + >; + }; +}; + +/ { + pwm8: dmtimer-pwm { + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_direction_pin>; + + compatible = "ti,omap-dmtimer-pwm"; + #pwm-cells = <3>; + ti,timers = <&timer8>; + ti,clock-source = <0x01>; + }; + + pwm9: dmtimer-pwm { + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_enable_pin>; + + compatible = "ti,omap-dmtimer-pwm"; + #pwm-cells = <3>; + ti,timers = <&timer9>; + ti,clock-source = <0x01>; + }; + + vibrator { + compatible = "pwm-vibrator"; + pwms = <&pwm8 0 1000000000 0>, + <&pwm9 0 1000000000 0>; + pwm-names = "enable", "direction"; + direction-duty-cycle-ns = <1000000000>; + }; +}; -- cgit v1.2.3-59-g8ed1b