From 291d761c16c9dc05050a92679c6aa92f263c4f51 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Fri, 10 Oct 2014 20:35:34 +0900 Subject: regulator: Document binding for regulator suspend state for PM state This patch add regulator suspend state to constraint in dt file. The regulation_ constraints structure already has regulator suspend state field as following. The regulator suspend state control the state of regulator according to PM (Power Management) state. - struct regulator_state state_disk - struct regulator_state state_mem Signed-off-by: Chanwoo Choi Acked-by: Kyungmin Park Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/regulator/regulator.txt | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index 86074334e342..aaad615899d2 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -19,6 +19,15 @@ Optional properties: design requires. This property describes the total system ramp time required due to the combination of internal ramping of the regulator itself, and board design issues such as trace capacitance and load on the supply. +- regulator-state-mem sub-root node for Suspend-to-RAM mode + : suspend to memory, the device goes to sleep, but all data stored in memory, + only some external interrupt can wake the device. +- regulator-state-disk sub-root node for Suspend-to-DISK mode + : suspend to disk, this state operates similarly to Suspend-to-RAM, + but includes a final step of writing memory contents to disk. +- regulator-state-[mem/disk] node has following common properties: + - regulator-on-in-suspend: regulator should be on in suspend state. + - regulator-off-in-suspend: regulator should be off in suspend state. Deprecated properties: - regulator-compatible: If a regulator chip contains multiple @@ -34,6 +43,10 @@ Example: regulator-max-microvolt = <2500000>; regulator-always-on; vin-supply = <&vin>; + + regulator-state-mem { + regulator-on-in-suspend; + }; }; Regulator Consumers: -- cgit v1.2.3-59-g8ed1b From a88f5c6deb2a44f694b01aac48231ec97059b26a Mon Sep 17 00:00:00 2001 From: Romain Perier Date: Tue, 14 Oct 2014 06:31:12 +0000 Subject: dt-bindings: Document the standard property "poweroff-source" Signed-off-by: Romain Perier Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/power/poweroff.txt | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/poweroff.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/power/poweroff.txt b/Documentation/devicetree/bindings/power/poweroff.txt new file mode 100644 index 000000000000..845868bf3273 --- /dev/null +++ b/Documentation/devicetree/bindings/power/poweroff.txt @@ -0,0 +1,18 @@ +* Generic Poweroff capability + +Power-management integrated circuits or miscellaneous harware components are +sometimes able to control the system power. The device driver associated to these +components might needs to define poweroff capability, which tells to the kernel +how to switch off the system. The corresponding driver must have the standard +property "poweroff-source" in its device node. This property marks the device as +able to shutdown the system. In order to test if this property is found +programmatically, use the helper function "of_system_has_poweroff_source" from +of.h . + +Example: + +act8846: act8846@5 { + compatible = "active-semi,act8846"; + status = "okay"; + poweroff-source; +} -- cgit v1.2.3-59-g8ed1b From 7a5f5d7b7ec6ccd2e907534e31c13ca63d2b497f Mon Sep 17 00:00:00 2001 From: Romain Perier Date: Tue, 14 Oct 2014 06:31:13 +0000 Subject: dt-bindings: Document the property poweroff-source for act8865 regulator Signed-off-by: Romain Perier Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/regulator/act8865-regulator.txt | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt index 865614b34d6f..01a5b0766e53 100644 --- a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt @@ -5,6 +5,10 @@ Required properties: - compatible: "active-semi,act8846" or "active-semi,act8865" - reg: I2C slave address +Optional properties: +- poweroff-source: Telling whether or not this pmic is controlling + the system power. See Documentation/devicetree/bindings/power/poweroff.txt . + Any standard regulator properties can be used to configure the single regulator. The valid names for regulators are: -- cgit v1.2.3-59-g8ed1b From c99ade664177db9a73400465470b5bd25309c14e Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Fri, 31 Oct 2014 20:52:57 -0700 Subject: regulator: Document binding for regulator suspend voltage This patch builds upon (291d761 regulator: Document binding for regulator suspend state for PM state) to allow setting the uV in addition to the state at suspend time. Signed-off-by: Doug Anderson Reviewed-by: Javier Martinez Canillas Reviewed-by: Chris Zhong Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/regulator/regulator.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index aaad615899d2..4e7ed762b3bb 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -28,6 +28,8 @@ Optional properties: - regulator-state-[mem/disk] node has following common properties: - regulator-on-in-suspend: regulator should be on in suspend state. - regulator-off-in-suspend: regulator should be off in suspend state. + - regulator-suspend-microvolt: regulator should be set to this voltage + in suspend. Deprecated properties: - regulator-compatible: If a regulator chip contains multiple -- cgit v1.2.3-59-g8ed1b From 218094c975e03b3b202663901a3bbf91041fdd20 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Mon, 10 Nov 2014 14:43:51 +0100 Subject: regulator: Document binding for initial and suspend modes Some regulators can run on different operating modes (opmodes). This allows systems to choose the most efficient opmode for each regulator. This patch builds on top of (291d761 regulator: Document binding for regulator suspend state for PM state) adding a regulator-initial-mode DT property to configure at startup the operating mode for regulators that support changing its mode during normal operation and a property regulator-mode to be used in the regulator-state-[mem/disk] nodes for regulators that supports changing its operating mode when the system enters in a suspend state. The set of possible modes that a regulator can operate depends on the hardware capabilities so a list of generic operating modes can't be provided. Instead, each hardware binding should define the list of valid operating modes for the regulators found on that device. Signed-off-by: Javier Martinez Canillas Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/regulator/regulator.txt | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index 4e7ed762b3bb..abb26b58c83e 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -30,6 +30,13 @@ Optional properties: - regulator-off-in-suspend: regulator should be off in suspend state. - regulator-suspend-microvolt: regulator should be set to this voltage in suspend. + - regulator-mode: operating mode in the given suspend state. + The set of possible operating modes depends on the capabilities of + every hardware so the valid modes are documented on each regulator + device tree binding document. +- regulator-initial-mode: initial operating mode. The set of possible operating + modes depends on the capabilities of every hardware so each device binding + documentation explains which values the regulator supports. Deprecated properties: - regulator-compatible: If a regulator chip contains multiple -- cgit v1.2.3-59-g8ed1b From bf66c48d026d0ea20a3e04fc32fb470e692707a9 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 11 Nov 2014 13:04:43 +0100 Subject: regulator: max77802: Document binding for regulator operating modes Some regulators from the max77802 PMIC support to be configured in one of two operating mode: Output ON (normal) and Output On Low Power Mode. Not all regulators support these two modes and for some of them, the mode can be changed while the system is running in normal operation while others only support their mode to be changed on system suspend. Extend the max77802 PMIC binding by documenting the possible operating modes values so the regulators modes can be configured correctly. Signed-off-by: Javier Martinez Canillas Signed-off-by: Mark Brown --- .../devicetree/bindings/regulator/max77802.txt | 35 ++++++++++++++++++++++ 1 file changed, 35 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/regulator/max77802.txt b/Documentation/devicetree/bindings/regulator/max77802.txt index 5aeaffc0f1f0..79e5476444f7 100644 --- a/Documentation/devicetree/bindings/regulator/max77802.txt +++ b/Documentation/devicetree/bindings/regulator/max77802.txt @@ -25,6 +25,29 @@ with their hardware counterparts as follow. The valid names are: example: LDO1, LDO2, LDO35. -BUCKn : for BUCKs, where n can lie in range 1 to 10. example: BUCK1, BUCK5, BUCK10. + +The max77802 regulator supports two different operating modes: Normal and Low +Power Mode. Some regulators support the modes to be changed at startup or by +the consumers during normal operation while others only support to change the +mode during system suspend. The standard regulator suspend states binding can +be used to configure the regulator operating mode. + +The regulators that support the standard "regulator-initial-mode" property, +changing their mode during normal operation are: LDOs 1, 3, 20 and 21. + +The possible values for "regulator-initial-mode" and "regulator-mode" are: + 1: Normal regulator voltage output mode. + 3: Low Power which reduces the quiescent current down to only 1uA + +The list of valid modes are defined in the dt-bindings/clock/maxim,max77802.h +header and can be included by device tree source files. + +The standard "regulator-mode" property can only be used for regulators that +support changing their mode to Low Power Mode during suspend. These regulators +are: BUCKs 2-4 and LDOs 1-35. Also, it only takes effect if the regulator has +been enabled for the given suspend state using "regulator-on-in-suspend" and +has not been disabled for that state using "regulator-off-in-suspend". + Example: max77802@09 { @@ -36,11 +59,23 @@ Example: #size-cells = <0>; regulators { + ldo1_reg: LDO1 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-initial-mode = ; + }; + ldo11_reg: LDO11 { regulator-name = "vdd_ldo11"; regulator-min-microvolt = <1900000>; regulator-max-microvolt = <1900000>; regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = ; + }; }; buck1_reg: BUCK1 { -- cgit v1.2.3-59-g8ed1b From 8f73110f6bac043026bc923b0a66abe24dd48058 Mon Sep 17 00:00:00 2001 From: Romain Perier Date: Tue, 25 Nov 2014 12:28:25 +0000 Subject: of: Rename "poweroff-source" property to "system-power-controller" It reverts commit a4b4e0461ec5 ("of: Add standard property for poweroff capability"). As discussed on the mailing list, it makes more sense to rename back to the old established property name, without the vendor prefix. Problem being that the word "source" usually tends to be used for inputs and that is out of control of the OS. The poweroff capability is an output which simply turns the system-power off. Also, this property might be used by drivers which power-off the system and power back on subsequent RTC alarms. This seems to suggest to remove "poweroff" from the property name and to choose "system-power-controller" as the more generic name. This patchs adds the required renaming changes and defines an helper function which checks if this property is set. Signed-off-by: Romain Perier Acked-by: Grant Likely Acked-by: Johan Hovold Signed-off-by: Mark Brown --- .../devicetree/bindings/power/power-controller.txt | 18 ++++++++++++++++++ Documentation/devicetree/bindings/power/poweroff.txt | 18 ------------------ .../bindings/regulator/act8865-regulator.txt | 4 ++-- drivers/regulator/act8865-regulator.c | 2 +- include/linux/of.h | 6 +++--- 5 files changed, 24 insertions(+), 24 deletions(-) create mode 100644 Documentation/devicetree/bindings/power/power-controller.txt delete mode 100644 Documentation/devicetree/bindings/power/poweroff.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/power/power-controller.txt b/Documentation/devicetree/bindings/power/power-controller.txt new file mode 100644 index 000000000000..845868bf3273 --- /dev/null +++ b/Documentation/devicetree/bindings/power/power-controller.txt @@ -0,0 +1,18 @@ +* Generic Poweroff capability + +Power-management integrated circuits or miscellaneous harware components are +sometimes able to control the system power. The device driver associated to these +components might needs to define poweroff capability, which tells to the kernel +how to switch off the system. The corresponding driver must have the standard +property "poweroff-source" in its device node. This property marks the device as +able to shutdown the system. In order to test if this property is found +programmatically, use the helper function "of_system_has_poweroff_source" from +of.h . + +Example: + +act8846: act8846@5 { + compatible = "active-semi,act8846"; + status = "okay"; + poweroff-source; +} diff --git a/Documentation/devicetree/bindings/power/poweroff.txt b/Documentation/devicetree/bindings/power/poweroff.txt deleted file mode 100644 index 845868bf3273..000000000000 --- a/Documentation/devicetree/bindings/power/poweroff.txt +++ /dev/null @@ -1,18 +0,0 @@ -* Generic Poweroff capability - -Power-management integrated circuits or miscellaneous harware components are -sometimes able to control the system power. The device driver associated to these -components might needs to define poweroff capability, which tells to the kernel -how to switch off the system. The corresponding driver must have the standard -property "poweroff-source" in its device node. This property marks the device as -able to shutdown the system. In order to test if this property is found -programmatically, use the helper function "of_system_has_poweroff_source" from -of.h . - -Example: - -act8846: act8846@5 { - compatible = "active-semi,act8846"; - status = "okay"; - poweroff-source; -} diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt index 01a5b0766e53..dad6358074ac 100644 --- a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt @@ -6,8 +6,8 @@ Required properties: - reg: I2C slave address Optional properties: -- poweroff-source: Telling whether or not this pmic is controlling - the system power. See Documentation/devicetree/bindings/power/poweroff.txt . +- system-power-controller: Telling whether or not this pmic is controlling + the system power. See Documentation/devicetree/bindings/power/power-controller.txt . Any standard regulator properties can be used to configure the single regulator. diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c index 76301ed0f8d4..9eec453b745d 100644 --- a/drivers/regulator/act8865-regulator.c +++ b/drivers/regulator/act8865-regulator.c @@ -365,7 +365,7 @@ static int act8865_pmic_probe(struct i2c_client *client, return ret; } - if (of_system_has_poweroff_source(dev->of_node)) { + if (of_device_is_system_power_controller(dev->of_node)) { if (!pm_power_off) { act8865_i2c_client = client; act8865->off_reg = off_reg; diff --git a/include/linux/of.h b/include/linux/of.h index 27b3ba1e9e59..257677256612 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -867,14 +867,14 @@ static inline int of_changeset_update_property(struct of_changeset *ocs, extern int of_resolve_phandles(struct device_node *tree); /** - * of_system_has_poweroff_source - Tells if poweroff-source is found for device_node + * of_device_is_system_power_controller - Tells if system-power-controller is found for device_node * @np: Pointer to the given device_node * * return true if present false otherwise */ -static inline bool of_system_has_poweroff_source(const struct device_node *np) +static inline bool of_device_is_system_power_controller(const struct device_node *np) { - return of_property_read_bool(np, "poweroff-source"); + return of_property_read_bool(np, "system-power-controller"); } #endif /* _LINUX_OF_H */ -- cgit v1.2.3-59-g8ed1b From 0ce5b30763fb2a0e8cdc24311bb833003d35dc05 Mon Sep 17 00:00:00 2001 From: Romain Perier Date: Tue, 25 Nov 2014 12:28:26 +0000 Subject: dt-bindings: Update documentation for "system-power-controller" and fix misspellings Signed-off-by: Romain Perier Acked-by: Johan Hovold Acked-by: Grant Likely Signed-off-by: Mark Brown --- .../devicetree/bindings/power/power-controller.txt | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/power/power-controller.txt b/Documentation/devicetree/bindings/power/power-controller.txt index 845868bf3273..4f7a3bc9c407 100644 --- a/Documentation/devicetree/bindings/power/power-controller.txt +++ b/Documentation/devicetree/bindings/power/power-controller.txt @@ -1,18 +1,18 @@ -* Generic Poweroff capability +* Generic system power control capability -Power-management integrated circuits or miscellaneous harware components are -sometimes able to control the system power. The device driver associated to these -components might needs to define poweroff capability, which tells to the kernel -how to switch off the system. The corresponding driver must have the standard -property "poweroff-source" in its device node. This property marks the device as -able to shutdown the system. In order to test if this property is found -programmatically, use the helper function "of_system_has_poweroff_source" from -of.h . +Power-management integrated circuits or miscellaneous hardware components are +sometimes able to control the system power. The device driver associated with these +components might need to define this capability, which tells the kernel that +it can be used to switch off the system. The corresponding device must have the +standard property "system-power-controller" in its device node. This property +marks the device as able to control the system power. In order to test if this +property is found programmatically, use the helper function +"of_device_is_system_power_controller" from of.h . Example: act8846: act8846@5 { compatible = "active-semi,act8846"; status = "okay"; - poweroff-source; + system-power-controller; } -- cgit v1.2.3-59-g8ed1b From 8b7daad3da2b36f5fe494f5d0c5ef25b33d56b96 Mon Sep 17 00:00:00 2001 From: Gyungoh Yoo Date: Tue, 2 Dec 2014 17:05:29 +0900 Subject: regulator: sky81452: Modify Device Tree structure Signed-off-by: Gyungoh Yoo Signed-off-by: Mark Brown --- .../devicetree/bindings/regulator/sky81452-regulator.txt | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt b/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt index 882455e9b36d..f9acbc1f3c6b 100644 --- a/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt @@ -1,6 +1,7 @@ SKY81452 voltage regulator Required properties: +- regulator node named lout. - any required generic properties defined in regulator.txt Optional properties: @@ -9,8 +10,9 @@ Optional properties: Example: regulator { - /* generic regulator properties */ - regulator-name = "touch_en"; - regulator-min-microvolt = <4500000>; - regulator-max-microvolt = <8000000>; + lout { + regulator-name = "sky81452-lout"; + regulator-min-microvolt = <4500000>; + regulator-max-microvolt = <8000000>; + }; }; -- cgit v1.2.3-59-g8ed1b