From 6b14dd7267126931e9a95c68a442e8f2dabdc3c4 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Mon, 12 Aug 2019 19:50:04 +0200 Subject: ARM: dts: meson8b: odroidc1: use the MAC address stored in the eFuse Odroid-C1 uses the MAC address stored in eFuse at offset 0x1b4 (which is defined as a "standard" offset for all Meson8 and Meson8b boards, but testing shows that MXQ doesn't have the eFuse values programmed and EC-100 stores it's MAC address in eMMC). Add the nvmem cell which points to the MAC address and asssign it to the Ethernet controller as "mac-address". As result of this the MAC address which is stored in the eFuse is now assigned to the Ethernet controller and consistent across reboots. Signed-off-by: Martin Blumenstingl Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/meson8b-odroidc1.dts | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch/arm/boot/dts/meson8b-odroidc1.dts') diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index 90f66dc45115..a24eccc354b9 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -190,6 +190,12 @@ cpu-supply = <&vcck>; }; +&efuse { + ethernet_mac_address: mac@1b4 { + reg = <0x1b4 0x6>; + }; +}; + ðmac { status = "okay"; @@ -200,6 +206,9 @@ phy-handle = <ð_phy>; amlogic,tx-delay-ns = <4>; + nvmem-cells = <ðernet_mac_address>; + nvmem-cell-names = "mac-address"; + mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; -- cgit v1.2.3-59-g8ed1b