From ed7eac3371f39a2c9f4b594dbca04c50fff4739a Mon Sep 17 00:00:00 2001 From: Mikko Perttunen Date: Fri, 26 Sep 2014 12:43:12 +0300 Subject: ARM: tegra: Add thermal trip points for Jetson TK1 This adds critical trip points to the Jetson TK1 device tree. The device will do a controlled shutdown when either the CPU, GPU or MEM thermal zone reaches 101 degrees Celsius. Signed-off-by: Mikko Perttunen Signed-off-by: Eduardo Valentin --- arch/arm/boot/dts/tegra124-jetson-tk1.dts | 44 +++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) (limited to 'arch/arm/boot/dts/tegra124-jetson-tk1.dts') diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 029c9a021541..f46a7892d269 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -1941,4 +1941,48 @@ <&tegra_car TEGRA124_CLK_EXTERN1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; + + thermal-zones { + cpu { + trips { + trip@0 { + temperature = <101000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + /* There are currently no cooling maps because there are no cooling devices */ + }; + }; + + mem { + trips { + trip@0 { + temperature = <101000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + /* There are currently no cooling maps because there are no cooling devices */ + }; + }; + + gpu { + trips { + trip@0 { + temperature = <101000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + /* There are currently no cooling maps because there are no cooling devices */ + }; + }; + }; }; -- cgit v1.2.3-59-g8ed1b