From 4ae7c364b9320063504db78834fabe59d16f85bf Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Mon, 28 Aug 2017 15:18:16 +0200 Subject: ARM: dts: nokia n900: drop unneeded/undocumented parts of the dts Sakari mentioned that some parts of the dts are not needed and do not have proper documentation, yet. As the camera works without them, remove them for now. Signed-off-by: Pavel Machek Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-n900.dts | 11 ----------- 1 file changed, 11 deletions(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 26c20e1167b9..4acd32a1c4ef 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -144,15 +144,6 @@ io-channel-names = "temp", "bsi", "vbat"; }; - rear_camera: camera@0 { - compatible = "linux,camera"; - - module { - model = "TCM8341MD"; - sensor = <&cam1>; - }; - }; - pwm9: dmtimer-pwm { compatible = "ti,omap-dmtimer-pwm"; #pwm-cells = <3>; @@ -189,10 +180,8 @@ clock-lanes = <1>; data-lanes = <0>; lane-polarity = <0 0>; - clock-inv = <0>; /* Select strobe = <1> for back camera, <0> for front camera */ strobe = <1>; - crc = <0>; }; }; }; -- cgit v1.2.3-59-g8ed1b From 8aed1026ccfe9cf5772c62bde35bc101ead9308c Mon Sep 17 00:00:00 2001 From: Keerthy Date: Wed, 6 Sep 2017 19:09:32 +0530 Subject: ARM: dts: dra7: Set a default parent to mcasp3_ahclkx_mux Assign a default parent to mcasp3_ahclkx_mux clock using the assigned-clock-parents property. This is helpful in cases like kexec where in the clock parent can be something other than the value at reset. Suggested-by: Tero Kristo Signed-off-by: Keerthy Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7xx-clocks.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index cf229dfabf61..e62b62875cba 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -1817,6 +1817,8 @@ clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ti,bit-shift = <24>; reg = <0x1868>; + assigned-clocks = <&mcasp3_ahclkx_mux>; + assigned-clock-parents = <&abe_24m_fclk>; }; mcasp3_aux_gfclk_mux: mcasp3_aux_gfclk_mux@1868 { -- cgit v1.2.3-59-g8ed1b From cddfae253c875076750a03bd05ba5b1569e6876e Mon Sep 17 00:00:00 2001 From: Suniel Mahesh Date: Mon, 11 Sep 2017 12:00:16 +0530 Subject: ARM: dts: am33xx: Add spi alias to match SOC schematics Linux bus numbers should match the numbers defined by the chip manufacturer. This patch add's spi aliases to achieve that bus naming convention. Signed-off-by: Suniel Mahesh Signed-off-by: Karthik Tummala Tested-by: Karthik Tummala Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 7d7ca054c557..e58fab8aec5d 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -36,6 +36,8 @@ phy1 = &usb1_phy; ethernet0 = &cpsw_emac0; ethernet1 = &cpsw_emac1; + spi0 = &spi0; + spi1 = &spi1; }; cpus { -- cgit v1.2.3-59-g8ed1b From 4afa616ce937f88d9a69a71b8c561551596a81e3 Mon Sep 17 00:00:00 2001 From: Yogesh Siraswar Date: Thu, 14 Sep 2017 14:30:07 -0500 Subject: ARM: dts: am43xx-epos-evm: Remove extra CPSW EMAC entry On am438x EPOS boards there is only one ethernet port, remove extra port definition. This boot log warnings during PHY detection. Signed-off-by: Yogesh Siraswar Signed-off-by: Andrew F. Davis Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am43x-epos-evm.dts | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 9d276af7c539..081fa68b6f98 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -388,6 +388,7 @@ pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; status = "okay"; + slaves = <1>; }; &davinci_mdio { @@ -402,11 +403,6 @@ phy-mode = "rmii"; }; -&cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; - phy-mode = "rmii"; -}; - &phy_sel { rmii-clock-ext; }; -- cgit v1.2.3-59-g8ed1b