From 6097c2d0afa4ff70ece8610875a0f0592064de29 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 12 Jan 2017 15:22:42 +0100 Subject: ARM: dts: Ux500: move USB PHY pins to PHY device The physical pins from the SoC are in a sense belonging to the PHY device (AB8500 USB) rather than the MUSB USB IP block. The driver definately assumes so: before this change it complains that it cannot control the pins it is using: abx5x0-usb ab8500-usb.0: could not get/set default pinstate After this patch the warning goes away. Cc: Ulf Hansson Signed-off-by: Linus Walleij --- arch/arm/boot/dts/ste-href.dtsi | 12 ++++++------ arch/arm/boot/dts/ste-snowball.dts | 12 ++++++------ 2 files changed, 12 insertions(+), 12 deletions(-) (limited to 'arch/arm/boot') diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 1b59943ab6ec..865da0259963 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -19,12 +19,6 @@ }; soc { - usb_per5@a03e0000 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&musb_default_mode>; - pinctrl-1 = <&musb_sleep_mode>; - }; - uart@80120000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart0_default_mode>; @@ -225,6 +219,12 @@ ab8500-gpio { }; + ab8500_usb { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&musb_default_mode>; + pinctrl-1 = <&musb_sleep_mode>; + }; + ab8500-regulators { ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-name = "V-DISPLAY"; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 7900e5d6aa05..d5f61256fe56 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -159,12 +159,6 @@ "", "", "", "", "", "", "", ""; }; - usb_per5@a03e0000 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&musb_default_mode>; - pinctrl-1 = <&musb_sleep_mode>; - }; - sound { compatible = "stericsson,snd-soc-mop500"; @@ -451,6 +445,12 @@ "PM_GPIO42"; /* AB8500 GPIO42 */ }; + ab8500_usb { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&musb_default_mode>; + pinctrl-1 = <&musb_sleep_mode>; + }; + ext_regulators: ab8500-ext-regulators { ab8500_ext1_reg: ab8500_ext1 { regulator-name = "ab8500-ext-supply1"; -- cgit v1.2.3-59-g8ed1b