From 90e37c57bab2876c50fe479d26e228c9aa871556 Mon Sep 17 00:00:00 2001 From: Daniel Walker Date: Wed, 12 May 2010 14:24:15 -0700 Subject: msm: update basic board layout for MSM7x30 Signed-off-by: Daniel Walker Signed-off-by: David Brown Signed-off-by: Gregory Bean Signed-off-by: Abhijeet Dharmapurikar Signed-off-by: Stepan Moskovchenko --- arch/arm/mach-msm/board-msm7x30.c | 116 +++++++------------------------------- 1 file changed, 20 insertions(+), 96 deletions(-) (limited to 'arch/arm/mach-msm/board-msm7x30.c') diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index af132ebd86c5..bac1f3c38a3b 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -30,96 +30,37 @@ #include #include -#include #include #include -#include #include #include - #include "devices.h" -#include "timer.h" -#include "socinfo.h" - -static struct resource smc91x_resources[] = { - [0] = { - .start = 0x8A000300, - .end = 0x8A0003ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = MSM_GPIO_TO_INT(156), - .end = MSM_GPIO_TO_INT(156), - .flags = IORESOURCE_IRQ, - }, -}; +#include "proc_comm.h" -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static struct smsc911x_platform_config smsc911x_config = { - .phy_interface = PHY_INTERFACE_MODE_MII, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, - .flags = SMSC911X_USE_32BIT, -}; - -static struct resource smsc911x_resources[] = { - [0] = { - .start = 0x8D000000, - .end = 0x8D000100, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = MSM_GPIO_TO_INT(88), - .end = MSM_GPIO_TO_INT(88), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device smsc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(smsc911x_resources), - .resource = smsc911x_resources, - .dev = { - .platform_data = &smsc911x_config, - }, -}; +extern struct sys_timer msm_timer; -static struct msm_gpio smsc911x_gpios[] = { - { GPIO_CFG(172, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "ebi2_addr6" }, - { GPIO_CFG(173, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "ebi2_addr5" }, - { GPIO_CFG(174, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "ebi2_addr4" }, - { GPIO_CFG(175, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "ebi2_addr3" }, - { GPIO_CFG(176, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "ebi2_addr2" }, - { GPIO_CFG(177, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "ebi2_addr1" }, - { GPIO_CFG(178, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "ebi2_addr0" }, - { GPIO_CFG(88, 2, GPIO_INPUT, GPIO_PULL_UP, GPIO_2MA), "smsc911x_irq" }, +#ifdef CONFIG_SERIAL_MSM_CONSOLE +static struct msm_gpio uart2_config_data[] = { + { GPIO_CFG(49, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "UART2_RFR"}, + { GPIO_CFG(50, 2, GPIO_INPUT, GPIO_PULL_DOWN, GPIO_2MA), "UART2_CTS"}, + { GPIO_CFG(51, 2, GPIO_INPUT, GPIO_PULL_DOWN, GPIO_2MA), "UART2_Rx"}, + { GPIO_CFG(52, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "UART2_Tx"}, }; -static void msm7x30_cfg_smsc911x(void) +static void msm7x30_init_uart2(void) { - int rc; + msm_gpios_request_enable(uart2_config_data, + ARRAY_SIZE(uart2_config_data)); - rc = msm_gpios_request_enable(smsc911x_gpios, - ARRAY_SIZE(smsc911x_gpios)); - if (rc) - pr_err("%s: unable to enable gpios\n", __func__); } +#endif static struct platform_device *devices[] __initdata = { - &msm_device_smd, - &msm_device_dmov, - &smc91x_device, - &smsc911x_device, - &msm_device_nand, - &msm_device_uart_dm1, +#if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER) + &msm_device_uart2, +#endif + }; static void __init msm7x30_init_irq(void) @@ -127,35 +68,18 @@ static void __init msm7x30_init_irq(void) msm_init_irq(); } -static void __init msm_7x30_init_nand(void) -{ - int rc; - /* Enable GPIO 86 & 115 */ - rc = msm_gpios_request_enable(msm_nand_ebi2_cfg_data, - ARRAY_SIZE(msm_nand_ebi2_cfg_data)); - if (rc) - printk(KERN_ERR "%s: Failed to enable GPIO 86 & 115\n", - __func__); -} - static void __init msm7x30_init(void) { - if (socinfo_init() < 0) - printk(KERN_ERR "%s: socinfo_init() failed!\n", - __func__); - msm_acpu_clock_init(&msm7x30_clock_data); - if (machine_is_msm7x30_surf() || machine_is_msm7x30_fluid()) - msm7x30_cfg_smsc911x(); platform_add_devices(devices, ARRAY_SIZE(devices)); - msm_7x30_init_nand(); - buses_init(); +#ifdef CONFIG_SERIAL_MSM_CONSOLE + msm7x30_init_uart2(); +#endif + } static void __init msm7x30_map_io(void) { - msm_shared_ram_phys = 0x00000000; msm_map_msm7x30_io(); - msm7x30_allocate_memory_regions(); msm_clock_init(msm_clocks_7x30, msm_num_clocks_7x30); } -- cgit v1.2.3-59-g8ed1b