From e949f93c591352f0376fdd192b4060a38c102ba5 Mon Sep 17 00:00:00 2001 From: Paul Parsons Date: Wed, 2 May 2012 16:49:24 +0100 Subject: ARM: pxa: hx4700: Enable ASIC3 GPIO as a wakeup source This patch enables the ASIC3 GPIO (12) as a wakeup source: 1. Set the WAKEUP_ON_EDGE_RISE MFP config bits for GPIO12 in hx4700_pin_config[]. 2. Call gpio_set_wake() for GPIO12. With GPIO12 thus enabled, the mfd/asic3 driver can enable its own GPIOs as wakeup sources by implementing a irq_set_wake() handler. Signed-off-by: Paul Parsons Cc: Philipp Zabel Signed-off-by: Haojian Zhuang --- arch/arm/mach-pxa/hx4700.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm/mach-pxa') diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index fe8fb7adcac8..2fe0fa0cb383 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -125,7 +125,7 @@ static unsigned long hx4700_pin_config[] __initdata = { GPIO88_GPIO, /* HX4700 specific input GPIOs */ - GPIO12_GPIO, /* ASIC3_IRQ */ + GPIO12_GPIO | WAKEUP_ON_EDGE_RISE, /* ASIC3_IRQ */ GPIO13_GPIO, /* W3220_IRQ */ GPIO14_GPIO, /* nWLAN_IRQ */ @@ -860,6 +860,7 @@ static void __init hx4700_init(void) int ret; pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config)); + gpio_set_wake(GPIO12_HX4700_ASIC3_IRQ, 1); ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios)); if (ret) pr_err ("hx4700: Failed to request GPIOs.\n"); -- cgit v1.2.3-59-g8ed1b