From a0719f52d90aed5b82ecf2f3ed14bc4ced3d1a8a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 13 Sep 2010 13:40:04 +0100 Subject: ARM: 6376/1: plat-nomadik: MTU: Change prescaler limit and comment updates The prescaler 16 is now used only when the timer runs at 32 MHz or more. Some comment updates as well. Acked-by: Alessandro Rubini Signed-off-by: Jonas Aaberg Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/plat-nomadik/timer.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) (limited to 'arch/arm/plat-nomadik') diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c index d673888af18e..aedf9c1d645e 100644 --- a/arch/arm/plat-nomadik/timer.c +++ b/arch/arm/plat-nomadik/timer.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-nomadik/timer.c + * linux/arch/arm/plat-nomadik/timer.c * * Copyright (C) 2008 STMicroelectronics * Copyright (C) 2010 Alessandro Rubini @@ -75,7 +75,7 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode, cr = readl(mtu_base + MTU_CR(1)); writel(0, mtu_base + MTU_LR(1)); writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1)); - writel(0x2, mtu_base + MTU_IMSC); + writel(1 << 1, mtu_base + MTU_IMSC); break; case CLOCK_EVT_MODE_SHUTDOWN: case CLOCK_EVT_MODE_UNUSED: @@ -131,7 +131,7 @@ void __init nmdk_timer_init(void) { unsigned long rate; struct clk *clk0; - u32 cr; + u32 cr = MTU_CRn_32BITS; clk0 = clk_get_sys("mtu0", NULL); BUG_ON(IS_ERR(clk0)); @@ -139,12 +139,15 @@ void __init nmdk_timer_init(void) clk_enable(clk0); /* - * Tick rate is 2.4MHz for Nomadik and 110MHz for ux500: - * use a divide-by-16 counter if it's more than 16MHz + * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz + * for ux500. + * Use a divide-by-16 counter if the tick rate is more than 32MHz. + * At 32 MHz, the timer (with 32 bit counter) can be programmed + * to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer + * with 16 gives too low timer resolution. */ - cr = MTU_CRn_32BITS;; rate = clk_get_rate(clk0); - if (rate > 16 << 20) { + if (rate > 32000000) { rate /= 16; cr |= MTU_CRn_PRESCALE_16; } else { -- cgit v1.2.3-59-g8ed1b