From 63a913c157f5a67ab233f7d5fc607819de4fdacd Mon Sep 17 00:00:00 2001 From: Scott Branden Date: Wed, 19 Jul 2017 10:05:49 -0700 Subject: arm64: dts: move ns2 into northstar2 directory Place northstar2 into its own subdirectory. This helps as the number of Broadcom boards grow and we can separate them per SoC. Signed-off-by: Scott Branden Signed-off-by: Florian Fainelli --- arch/arm64/boot/dts/broadcom/Makefile | 4 +- arch/arm64/boot/dts/broadcom/northstar2/Makefile | 6 + .../boot/dts/broadcom/northstar2/ns2-clock.dtsi | 105 +++ .../arm64/boot/dts/broadcom/northstar2/ns2-svk.dts | 236 +++++++ .../arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts | 191 +++++ arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 765 +++++++++++++++++++++ arch/arm64/boot/dts/broadcom/ns2-clock.dtsi | 105 --- arch/arm64/boot/dts/broadcom/ns2-svk.dts | 236 ------- arch/arm64/boot/dts/broadcom/ns2-xmc.dts | 191 ----- arch/arm64/boot/dts/broadcom/ns2.dtsi | 765 --------------------- 10 files changed, 1305 insertions(+), 1299 deletions(-) create mode 100644 arch/arm64/boot/dts/broadcom/northstar2/Makefile create mode 100644 arch/arm64/boot/dts/broadcom/northstar2/ns2-clock.dtsi create mode 100644 arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts create mode 100644 arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts create mode 100644 arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi delete mode 100644 arch/arm64/boot/dts/broadcom/ns2-clock.dtsi delete mode 100644 arch/arm64/boot/dts/broadcom/ns2-svk.dts delete mode 100644 arch/arm64/boot/dts/broadcom/ns2-xmc.dts delete mode 100644 arch/arm64/boot/dts/broadcom/ns2.dtsi (limited to 'arch/arm64/boot/dts/broadcom') diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index f11bdd6689ea..3eaef3895d66 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -1,7 +1,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb -dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb ns2-xmc.dtb -dts-dirs := stingray +dts-dirs += northstar2 +dts-dirs += stingray always := $(dtb-y) subdir-y := $(dts-dirs) clean-files := *.dtb diff --git a/arch/arm64/boot/dts/broadcom/northstar2/Makefile b/arch/arm64/boot/dts/broadcom/northstar2/Makefile new file mode 100644 index 000000000000..e01a1485b813 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/northstar2/Makefile @@ -0,0 +1,6 @@ +dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb +dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-xmc.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-clock.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2-clock.dtsi new file mode 100644 index 000000000000..99009fdf10a4 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-clock.dtsi @@ -0,0 +1,105 @@ +/* + * BSD LICENSE + * + * Copyright (c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + lcpll_ddr: lcpll_ddr@6501d058 { + #clock-cells = <1>; + compatible = "brcm,ns2-lcpll-ddr"; + reg = <0x6501d058 0x20>, + <0x6501c020 0x4>, + <0x6501d04c 0x4>; + clocks = <&osc>; + clock-output-names = "lcpll_ddr", "pcie_sata_usb", + "ddr", "ddr_ch2_unused", + "ddr_ch3_unused", "ddr_ch4_unused", + "ddr_ch5_unused"; + }; + + lcpll_ports: lcpll_ports@6501d078 { + #clock-cells = <1>; + compatible = "brcm,ns2-lcpll-ports"; + reg = <0x6501d078 0x20>, + <0x6501c020 0x4>, + <0x6501d054 0x4>; + clocks = <&osc>; + clock-output-names = "lcpll_ports", "wan", "rgmii", + "ports_ch2_unused", + "ports_ch3_unused", + "ports_ch4_unused", + "ports_ch5_unused"; + }; + + genpll_scr: genpll_scr@6501d098 { + #clock-cells = <1>; + compatible = "brcm,ns2-genpll-scr"; + reg = <0x6501d098 0x32>, + <0x6501c020 0x4>, + <0x6501d044 0x4>; + clocks = <&osc>; + clock-output-names = "genpll_scr", "scr", "fs", + "audio_ref", "scr_ch3_unused", + "scr_ch4_unused", "scr_ch5_unused"; + }; + + iprocmed: iprocmed { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>; + clock-div = <2>; + clock-mult = <1>; + }; + + iprocslow: iprocslow { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>; + clock-div = <4>; + clock-mult = <1>; + }; + + genpll_sw: genpll_sw@6501d0c4 { + #clock-cells = <1>; + compatible = "brcm,ns2-genpll-sw"; + reg = <0x6501d0c4 0x32>, + <0x6501c020 0x4>, + <0x6501d044 0x4>; + clocks = <&osc>; + clock-output-names = "genpll_sw", "rpe", "250", "nic", + "chimp", "port", "sdio"; + }; diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts new file mode 100644 index 000000000000..ec19fbf928a1 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts @@ -0,0 +1,236 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "ns2.dtsi" + +/ { + model = "Broadcom NS2 SVK"; + compatible = "brcm,ns2-svk", "brcm,ns2"; + + aliases { + serial0 = &uart3; + serial1 = &uart0; + serial2 = &uart1; + serial3 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + bootargs = "earlycon=uart8250,mmio32,0x66130000"; + }; + + memory { + device_type = "memory"; + reg = <0x000000000 0x80000000 0x00000000 0x40000000>; + }; +}; + +&enet { + status = "okay"; +}; + +&pci_phy0 { + status = "okay"; +}; + +&pci_phy1 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie4 { + status = "okay"; +}; + +&pcie8 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&ssp0 { + status = "okay"; + + slic@0 { + compatible = "silabs,si3226x"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpha = <1>; + spi-cpol = <1>; + pl022,hierarchy = <0>; + pl022,interface = <0>; + pl022,slave-tx-disable = <0>; + pl022,com-mode = <0>; + pl022,rx-level-trig = <1>; + pl022,tx-level-trig = <1>; + pl022,ctrl-len = <11>; + pl022,wait-state = <0>; + pl022,duplex = <0>; + }; +}; + +&ssp1 { + status = "okay"; + + at25@0 { + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <5000000>; + at25,byte-len = <0x8000>; + at25,addr-mode = <2>; + at25,page-size = <64>; + spi-cpha = <1>; + spi-cpol = <1>; + pl022,hierarchy = <0>; + pl022,interface = <0>; + pl022,slave-tx-disable = <0>; + pl022,com-mode = <0>; + pl022,rx-level-trig = <1>; + pl022,tx-level-trig = <1>; + pl022,ctrl-len = <11>; + pl022,wait-state = <0>; + pl022,duplex = <0>; + }; +}; + +&sata_phy0 { + status = "okay"; +}; + +&sata_phy1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&sdio0 { + status = "okay"; +}; + +&sdio1 { + status = "okay"; +}; + +&nand { + nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + nand-bus-width = <16>; + brcm,nand-oob-sector-size = <16>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&mdio_mux_iproc { + mdio@10 { + gphy0: eth-phy@10 { + enet-phy-lane-swap; + reg = <0x10>; + }; + }; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&nand_sel>; + nand_sel: nand_sel { + function = "nand"; + groups = "nand_grp"; + }; +}; + +&qspi { + bspi-sel = <0>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts new file mode 100644 index 000000000000..ab4ae1a32fab --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts @@ -0,0 +1,191 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "ns2.dtsi" + +/ { + model = "Broadcom NS2 XMC"; + compatible = "brcm,ns2-xmc", "brcm,ns2"; + + aliases { + serial0 = &uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + bootargs = "earlycon=uart8250,mmio32,0x66130000"; + }; + + memory { + device_type = "memory"; + reg = <0x000000000 0x80000000 0x00000001 0x00000000>; + }; +}; + +&enet { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&mdio_mux_iproc { + mdio@10 { + gphy0: eth-phy@10 { + reg = <0x10>; + }; + }; +}; + +&nand { + nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + nand-bus-width = <16>; + brcm,nand-oob-sector-size = <16>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00280000>; /* 2.5MB */ + read-only; + }; + + partition@280000 { + label = "nenv"; + reg = <0x00280000 0x00040000>; /* 0.25MB */ + read-only; + }; + + partition@2c0000 { + label = "ndtb"; + reg = <0x002c0000 0x00040000>; /* 0.25MB */ + read-only; + }; + + partition@300000 { + label = "nsystem"; + reg = <0x00300000 0x03d00000>; /* 61MB */ + read-only; + }; + + partition@4000000 { + label = "nrootfs"; + reg = <0x04000000 0x06400000>; /* 100MB */ + }; + + partition@0a400000{ + label = "ncustfs"; + reg = <0x0a400000 0x35c00000>; /* 860MB */ + }; + }; +}; + +&pci_phy0 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie8 { + status = "okay"; +}; + +&sata_phy0 { + status = "okay"; +}; + +&sata_phy1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&qspi { + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + spi-max-frequency = <62500000>; + m25p,default-addr-width = <3>; + reg = <0x0 0x0>; + + partition@0 { + label = "bl0"; + reg = <0x00000000 0x00080000>; /* 512KB */ + }; + + partition@80000 { + label = "fip"; + reg = <0x00080000 0x00150000>; /* 1344KB */ + }; + + partition@1e0000 { + label = "env"; + reg = <0x001e0000 0x00010000>;/* 64KB */ + }; + + partition@1f0000 { + label = "dtb"; + reg = <0x001f0000 0x00010000>; /* 64KB */ + }; + + partition@200000 { + label = "kernel"; + reg = <0x00200000 0x00e00000>; /* 14MB */ + }; + + partition@1000000 { + label = "rootfs"; + reg = <0x01000000 0x01000000>; /* 16MB */ + }; + }; +}; + +&uart3 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi new file mode 100644 index 000000000000..35c8457e3d1f --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi @@ -0,0 +1,765 @@ +/* + * BSD LICENSE + * + * Copyright (c) 2015 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/memreserve/ 0x81000000 0x00200000; + +#include +#include + +/ { + compatible = "brcm,ns2"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + A57_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0 0>; + enable-method = "psci"; + next-level-cache = <&CLUSTER0_L2>; + }; + + A57_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0 1>; + enable-method = "psci"; + next-level-cache = <&CLUSTER0_L2>; + }; + + A57_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0 2>; + enable-method = "psci"; + next-level-cache = <&CLUSTER0_L2>; + }; + + A57_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0 3>; + enable-method = "psci"; + next-level-cache = <&CLUSTER0_L2>; + }; + + CLUSTER0_L2: l2-cache@000 { + compatible = "cache"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = , + , + , + ; + interrupt-affinity = <&A57_0>, + <&A57_1>, + <&A57_2>, + <&A57_3>; + }; + + pcie0: pcie@20020000 { + compatible = "brcm,iproc-pcie"; + reg = <0 0x20020000 0 0x1000>; + dma-coherent; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 281 IRQ_TYPE_NONE>; + + linux,pci-domain = <0>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x83000000 0 0x00000000 0 0x00000000 0 0x20000000>; + + brcm,pcie-ob; + brcm,pcie-ob-oarr-size; + brcm,pcie-ob-axi-offset = <0x00000000>; + brcm,pcie-ob-window-size = <256>; + + status = "disabled"; + + phys = <&pci_phy0>; + phy-names = "pcie-phy"; + + msi-parent = <&v2m0>; + }; + + pcie4: pcie@50020000 { + compatible = "brcm,iproc-pcie"; + reg = <0 0x50020000 0 0x1000>; + dma-coherent; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 305 IRQ_TYPE_NONE>; + + linux,pci-domain = <4>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x83000000 0 0x00000000 0 0x30000000 0 0x20000000>; + + brcm,pcie-ob; + brcm,pcie-ob-oarr-size; + brcm,pcie-ob-axi-offset = <0x30000000>; + brcm,pcie-ob-window-size = <256>; + + status = "disabled"; + + phys = <&pci_phy1>; + phy-names = "pcie-phy"; + + msi-parent = <&v2m0>; + }; + + pcie8: pcie@60c00000 { + compatible = "brcm,iproc-pcie-paxc"; + reg = <0 0x60c00000 0 0x1000>; + dma-coherent; + linux,pci-domain = <8>; + + bus-range = <0x0 0x1>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x83000000 0 0x00000000 0 0x60000000 0 0x00c00000>; + + status = "disabled"; + + msi-parent = <&v2m0>; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + #include "ns2-clock.dtsi" + + enet: ethernet@61000000 { + compatible = "brcm,ns2-amac"; + reg = <0x61000000 0x1000>, + <0x61090000 0x1000>, + <0x61030000 0x100>; + reg-names = "amac_base", "idm_base", "nicpm_base"; + interrupts = ; + dma-coherent; + phy-handle = <&gphy0>; + phy-mode = "rgmii"; + status = "disabled"; + }; + + pdc0: iproc-pdc0@612c0000 { + compatible = "brcm,iproc-pdc-mbox"; + reg = <0x612c0000 0x445>; /* PDC FS0 regs */ + interrupts = ; + #mbox-cells = <1>; + dma-coherent; + brcm,rx-status-len = <32>; + brcm,use-bcm-hdr; + }; + + crypto0: crypto@612d0000 { + compatible = "brcm,spum-crypto"; + reg = <0x612d0000 0x900>; + mboxes = <&pdc0 0>; + }; + + pdc1: iproc-pdc1@612e0000 { + compatible = "brcm,iproc-pdc-mbox"; + reg = <0x612e0000 0x445>; /* PDC FS1 regs */ + interrupts = ; + #mbox-cells = <1>; + dma-coherent; + brcm,rx-status-len = <32>; + brcm,use-bcm-hdr; + }; + + crypto1: crypto@612f0000 { + compatible = "brcm,spum-crypto"; + reg = <0x612f0000 0x900>; + mboxes = <&pdc1 0>; + }; + + pdc2: iproc-pdc2@61300000 { + compatible = "brcm,iproc-pdc-mbox"; + reg = <0x61300000 0x445>; /* PDC FS2 regs */ + interrupts = ; + #mbox-cells = <1>; + dma-coherent; + brcm,rx-status-len = <32>; + brcm,use-bcm-hdr; + }; + + crypto2: crypto@61310000 { + compatible = "brcm,spum-crypto"; + reg = <0x61310000 0x900>; + mboxes = <&pdc2 0>; + }; + + pdc3: iproc-pdc3@61320000 { + compatible = "brcm,iproc-pdc-mbox"; + reg = <0x61320000 0x445>; /* PDC FS3 regs */ + interrupts = ; + #mbox-cells = <1>; + dma-coherent; + brcm,rx-status-len = <32>; + brcm,use-bcm-hdr; + }; + + crypto3: crypto@61330000 { + compatible = "brcm,spum-crypto"; + reg = <0x61330000 0x900>; + mboxes = <&pdc3 0>; + }; + + dma0: dma@61360000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x61360000 0x1000>; + interrupts = , + , + , + , + , + , + , + , + ; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + clocks = <&iprocslow>; + clock-names = "apb_pclk"; + }; + + smmu: mmu@64000000 { + compatible = "arm,mmu-500"; + reg = <0x64000000 0x40000>; + #global-interrupts = <2>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + #iommu-cells = <1>; + }; + + pinctrl: pinctrl@6501d130 { + compatible = "brcm,ns2-pinmux"; + reg = <0x6501d130 0x08>, + <0x660a0028 0x04>, + <0x660009b0 0x40>; + }; + + gpio_aon: gpio@65024800 { + compatible = "brcm,iproc-gpio"; + reg = <0x65024800 0x50>, + <0x65024008 0x18>; + ngpios = <6>; + #gpio-cells = <2>; + gpio-controller; + }; + + gic: interrupt-controller@65210000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x65210000 0x1000>, + <0x65220000 0x1000>, + <0x65240000 0x2000>, + <0x65260000 0x1000>; + interrupts = ; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x652e0000 0x80000>; + + v2m0: v2m@00000 { + compatible = "arm,gic-v2m-frame"; + interrupt-parent = <&gic>; + msi-controller; + reg = <0x00000 0x1000>; + arm,msi-base-spi = <72>; + arm,msi-num-spis = <16>; + }; + + v2m1: v2m@10000 { + compatible = "arm,gic-v2m-frame"; + interrupt-parent = <&gic>; + msi-controller; + reg = <0x10000 0x1000>; + arm,msi-base-spi = <88>; + arm,msi-num-spis = <16>; + }; + + v2m2: v2m@20000 { + compatible = "arm,gic-v2m-frame"; + interrupt-parent = <&gic>; + msi-controller; + reg = <0x20000 0x1000>; + arm,msi-base-spi = <104>; + arm,msi-num-spis = <16>; + }; + + v2m3: v2m@30000 { + compatible = "arm,gic-v2m-frame"; + interrupt-parent = <&gic>; + msi-controller; + reg = <0x30000 0x1000>; + arm,msi-base-spi = <120>; + arm,msi-num-spis = <16>; + }; + + v2m4: v2m@40000 { + compatible = "arm,gic-v2m-frame"; + interrupt-parent = <&gic>; + msi-controller; + reg = <0x40000 0x1000>; + arm,msi-base-spi = <136>; + arm,msi-num-spis = <16>; + }; + + v2m5: v2m@50000 { + compatible = "arm,gic-v2m-frame"; + interrupt-parent = <&gic>; + msi-controller; + reg = <0x50000 0x1000>; + arm,msi-base-spi = <152>; + arm,msi-num-spis = <16>; + }; + + v2m6: v2m@60000 { + compatible = "arm,gic-v2m-frame"; + interrupt-parent = <&gic>; + msi-controller; + reg = <0x60000 0x1000>; + arm,msi-base-spi = <168>; + arm,msi-num-spis = <16>; + }; + + v2m7: v2m@70000 { + compatible = "arm,gic-v2m-frame"; + interrupt-parent = <&gic>; + msi-controller; + reg = <0x70000 0x1000>; + arm,msi-base-spi = <184>; + arm,msi-num-spis = <16>; + }; + }; + + cci@65590000 { + compatible = "arm,cci-400"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x65590000 0x1000>; + ranges = <0 0x65590000 0x10000>; + + pmu@9000 { + compatible = "arm,cci-400-pmu,r1", + "arm,cci-400-pmu"; + reg = <0x9000 0x4000>; + interrupts = , + , + , + , + , + ; + }; + }; + + usbdrd_phy: phy@66000960 { + #phy-cells = <0>; + compatible = "brcm,ns2-drd-phy"; + reg = <0x66000960 0x24>, + <0x67012800 0x4>, + <0x6501d148 0x4>, + <0x664d0700 0x4>; + reg-names = "icfg", "rst-ctrl", + "crmu-ctrl", "usb2-strap"; + id-gpios = <&gpio_g 30 0>; + vbus-gpios = <&gpio_g 31 0>; + status = "disabled"; + }; + + pwm: pwm@66010000 { + compatible = "brcm,iproc-pwm"; + reg = <0x66010000 0x28>; + clocks = <&osc>; + #pwm-cells = <3>; + status = "disabled"; + }; + + mdio_mux_iproc: mdio-mux@6602023c { + compatible = "brcm,mdio-mux-iproc"; + reg = <0x6602023c 0x14>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + pci_phy0: pci-phy@0 { + compatible = "brcm,ns2-pcie-phy"; + reg = <0x0>; + #phy-cells = <0>; + status = "disabled"; + }; + }; + + mdio@7 { + reg = <0x7>; + #address-cells = <1>; + #size-cells = <0>; + + pci_phy1: pci-phy@0 { + compatible = "brcm,ns2-pcie-phy"; + reg = <0x0>; + #phy-cells = <0>; + status = "disabled"; + }; + }; + + mdio@10 { + reg = <0x10>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + timer0: timer@66030000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x66030000 0x1000>; + interrupts = ; + clocks = <&iprocslow>, + <&iprocslow>, + <&iprocslow>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; + + timer1: timer@66040000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x66040000 0x1000>; + interrupts = ; + clocks = <&iprocslow>, + <&iprocslow>, + <&iprocslow>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; + + timer2: timer@66050000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x66050000 0x1000>; + interrupts = ; + clocks = <&iprocslow>, + <&iprocslow>, + <&iprocslow>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; + + timer3: timer@66060000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x66060000 0x1000>; + interrupts = ; + clocks = <&iprocslow>, + <&iprocslow>, + <&iprocslow>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; + + i2c0: i2c@66080000 { + compatible = "brcm,iproc-i2c"; + reg = <0x66080000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clock-frequency = <100000>; + status = "disabled"; + }; + + wdt0: watchdog@66090000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x66090000 0x1000>; + interrupts = ; + clocks = <&iprocslow>, <&iprocslow>; + clock-names = "wdogclk", "apb_pclk"; + }; + + gpio_g: gpio@660a0000 { + compatible = "brcm,iproc-gpio"; + reg = <0x660a0000 0x50>; + ngpios = <32>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + interrupts = ; + }; + + i2c1: i2c@660b0000 { + compatible = "brcm,iproc-i2c"; + reg = <0x660b0000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clock-frequency = <100000>; + status = "disabled"; + }; + + uart0: serial@66100000 { + compatible = "snps,dw-apb-uart"; + reg = <0x66100000 0x100>; + interrupts = ; + clocks = <&iprocslow>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart1: serial@66110000 { + compatible = "snps,dw-apb-uart"; + reg = <0x66110000 0x100>; + interrupts = ; + clocks = <&iprocslow>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart2: serial@66120000 { + compatible = "snps,dw-apb-uart"; + reg = <0x66120000 0x100>; + interrupts = ; + clocks = <&iprocslow>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart3: serial@66130000 { + compatible = "snps,dw-apb-uart"; + reg = <0x66130000 0x100>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc>; + status = "disabled"; + }; + + ssp0: ssp@66180000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x66180000 0x1000>; + interrupts = ; + clocks = <&iprocslow>, <&iprocslow>; + clock-names = "spiclk", "apb_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ssp1: ssp@66190000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x66190000 0x1000>; + interrupts = ; + clocks = <&iprocslow>, <&iprocslow>; + clock-names = "spiclk", "apb_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hwrng: hwrng@66220000 { + compatible = "brcm,iproc-rng200"; + reg = <0x66220000 0x28>; + }; + + sata_phy: sata_phy@663f0100 { + compatible = "brcm,iproc-ns2-sata-phy"; + reg = <0x663f0100 0x1f00>, + <0x663f004c 0x10>; + reg-names = "phy", "phy-ctrl"; + #address-cells = <1>; + #size-cells = <0>; + + sata_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + status = "disabled"; + }; + + sata_phy1: sata-phy@1 { + reg = <1>; + #phy-cells = <0>; + status = "disabled"; + }; + }; + + sata: ahci@663f2000 { + compatible = "brcm,iproc-ahci", "generic-ahci"; + reg = <0x663f2000 0x1000>; + dma-coherent; + reg-names = "ahci"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata0: sata-port@0 { + reg = <0>; + phys = <&sata_phy0>; + phy-names = "sata-phy"; + }; + + sata1: sata-port@1 { + reg = <1>; + phys = <&sata_phy1>; + phy-names = "sata-phy"; + }; + }; + + sdio0: sdhci@66420000 { + compatible = "brcm,sdhci-iproc-cygnus"; + reg = <0x66420000 0x100>; + interrupts = ; + dma-coherent; + bus-width = <8>; + clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>; + status = "disabled"; + }; + + sdio1: sdhci@66430000 { + compatible = "brcm,sdhci-iproc-cygnus"; + reg = <0x66430000 0x100>; + interrupts = ; + dma-coherent; + bus-width = <8>; + clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>; + status = "disabled"; + }; + + nand: nand@66460000 { + compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; + reg = <0x66460000 0x600>, + <0x67015408 0x600>, + <0x66460f00 0x20>; + reg-names = "nand", "iproc-idm", "iproc-ext"; + interrupts = ; + + #address-cells = <1>; + #size-cells = <0>; + + brcm,nand-has-wp; + }; + + qspi: spi@66470200 { + compatible = "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi"; + reg = <0x66470200 0x184>, + <0x66470000 0x124>, + <0x67017408 0x004>, + <0x664703a0 0x01c>; + reg-names = "mspi", "bspi", "intr_regs", + "intr_status_reg"; + interrupts = ; + interrupt-names = "spi_l1_intr"; + clocks = <&iprocmed>; + clock-names = "iprocmed"; + num-cs = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/ns2-clock.dtsi b/arch/arm64/boot/dts/broadcom/ns2-clock.dtsi deleted file mode 100644 index 99009fdf10a4..000000000000 --- a/arch/arm64/boot/dts/broadcom/ns2-clock.dtsi +++ /dev/null @@ -1,105 +0,0 @@ -/* - * BSD LICENSE - * - * Copyright (c) 2016 Broadcom. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Broadcom Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include - - osc: oscillator { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <25000000>; - }; - - lcpll_ddr: lcpll_ddr@6501d058 { - #clock-cells = <1>; - compatible = "brcm,ns2-lcpll-ddr"; - reg = <0x6501d058 0x20>, - <0x6501c020 0x4>, - <0x6501d04c 0x4>; - clocks = <&osc>; - clock-output-names = "lcpll_ddr", "pcie_sata_usb", - "ddr", "ddr_ch2_unused", - "ddr_ch3_unused", "ddr_ch4_unused", - "ddr_ch5_unused"; - }; - - lcpll_ports: lcpll_ports@6501d078 { - #clock-cells = <1>; - compatible = "brcm,ns2-lcpll-ports"; - reg = <0x6501d078 0x20>, - <0x6501c020 0x4>, - <0x6501d054 0x4>; - clocks = <&osc>; - clock-output-names = "lcpll_ports", "wan", "rgmii", - "ports_ch2_unused", - "ports_ch3_unused", - "ports_ch4_unused", - "ports_ch5_unused"; - }; - - genpll_scr: genpll_scr@6501d098 { - #clock-cells = <1>; - compatible = "brcm,ns2-genpll-scr"; - reg = <0x6501d098 0x32>, - <0x6501c020 0x4>, - <0x6501d044 0x4>; - clocks = <&osc>; - clock-output-names = "genpll_scr", "scr", "fs", - "audio_ref", "scr_ch3_unused", - "scr_ch4_unused", "scr_ch5_unused"; - }; - - iprocmed: iprocmed { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>; - clock-div = <2>; - clock-mult = <1>; - }; - - iprocslow: iprocslow { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>; - clock-div = <4>; - clock-mult = <1>; - }; - - genpll_sw: genpll_sw@6501d0c4 { - #clock-cells = <1>; - compatible = "brcm,ns2-genpll-sw"; - reg = <0x6501d0c4 0x32>, - <0x6501c020 0x4>, - <0x6501d044 0x4>; - clocks = <&osc>; - clock-output-names = "genpll_sw", "rpe", "250", "nic", - "chimp", "port", "sdio"; - }; diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts deleted file mode 100644 index ec19fbf928a1..000000000000 --- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts +++ /dev/null @@ -1,236 +0,0 @@ -/* - * BSD LICENSE - * - * Copyright(c) 2015 Broadcom Corporation. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Broadcom Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/dts-v1/; - -#include "ns2.dtsi" - -/ { - model = "Broadcom NS2 SVK"; - compatible = "brcm,ns2-svk", "brcm,ns2"; - - aliases { - serial0 = &uart3; - serial1 = &uart0; - serial2 = &uart1; - serial3 = &uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - bootargs = "earlycon=uart8250,mmio32,0x66130000"; - }; - - memory { - device_type = "memory"; - reg = <0x000000000 0x80000000 0x00000000 0x40000000>; - }; -}; - -&enet { - status = "okay"; -}; - -&pci_phy0 { - status = "okay"; -}; - -&pci_phy1 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; - -&pcie4 { - status = "okay"; -}; - -&pcie8 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; -}; - -&i2c1 { - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&uart3 { - status = "okay"; -}; - -&ssp0 { - status = "okay"; - - slic@0 { - compatible = "silabs,si3226x"; - reg = <0>; - spi-max-frequency = <5000000>; - spi-cpha = <1>; - spi-cpol = <1>; - pl022,hierarchy = <0>; - pl022,interface = <0>; - pl022,slave-tx-disable = <0>; - pl022,com-mode = <0>; - pl022,rx-level-trig = <1>; - pl022,tx-level-trig = <1>; - pl022,ctrl-len = <11>; - pl022,wait-state = <0>; - pl022,duplex = <0>; - }; -}; - -&ssp1 { - status = "okay"; - - at25@0 { - compatible = "atmel,at25"; - reg = <0>; - spi-max-frequency = <5000000>; - at25,byte-len = <0x8000>; - at25,addr-mode = <2>; - at25,page-size = <64>; - spi-cpha = <1>; - spi-cpol = <1>; - pl022,hierarchy = <0>; - pl022,interface = <0>; - pl022,slave-tx-disable = <0>; - pl022,com-mode = <0>; - pl022,rx-level-trig = <1>; - pl022,tx-level-trig = <1>; - pl022,ctrl-len = <11>; - pl022,wait-state = <0>; - pl022,duplex = <0>; - }; -}; - -&sata_phy0 { - status = "okay"; -}; - -&sata_phy1 { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - -&sdio0 { - status = "okay"; -}; - -&sdio1 { - status = "okay"; -}; - -&nand { - nandcs@0 { - compatible = "brcm,nandcs"; - reg = <0>; - nand-ecc-mode = "hw"; - nand-ecc-strength = <8>; - nand-ecc-step-size = <512>; - nand-bus-width = <16>; - brcm,nand-oob-sector-size = <16>; - #address-cells = <1>; - #size-cells = <1>; - }; -}; - -&mdio_mux_iproc { - mdio@10 { - gphy0: eth-phy@10 { - enet-phy-lane-swap; - reg = <0x10>; - }; - }; -}; - -&pinctrl { - pinctrl-names = "default"; - pinctrl-0 = <&nand_sel>; - nand_sel: nand_sel { - function = "nand"; - groups = "nand_grp"; - }; -}; - -&qspi { - bspi-sel = <0>; - flash: m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "m25p80"; - reg = <0x0>; - spi-max-frequency = <12500000>; - m25p,fast-read; - spi-cpol; - spi-cpha; - - partition@0 { - label = "boot"; - reg = <0x00000000 0x000a0000>; - }; - - partition@a0000 { - label = "env"; - reg = <0x000a0000 0x00060000>; - }; - - partition@100000 { - label = "system"; - reg = <0x00100000 0x00600000>; - }; - - partition@700000 { - label = "rootfs"; - reg = <0x00700000 0x01900000>; - }; - }; -}; diff --git a/arch/arm64/boot/dts/broadcom/ns2-xmc.dts b/arch/arm64/boot/dts/broadcom/ns2-xmc.dts deleted file mode 100644 index ab4ae1a32fab..000000000000 --- a/arch/arm64/boot/dts/broadcom/ns2-xmc.dts +++ /dev/null @@ -1,191 +0,0 @@ -/* - * BSD LICENSE - * - * Copyright(c) 2016 Broadcom. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Broadcom Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/dts-v1/; - -#include "ns2.dtsi" - -/ { - model = "Broadcom NS2 XMC"; - compatible = "brcm,ns2-xmc", "brcm,ns2"; - - aliases { - serial0 = &uart3; - }; - - chosen { - stdout-path = "serial0:115200n8"; - bootargs = "earlycon=uart8250,mmio32,0x66130000"; - }; - - memory { - device_type = "memory"; - reg = <0x000000000 0x80000000 0x00000001 0x00000000>; - }; -}; - -&enet { - status = "okay"; -}; - -&i2c0 { - status = "okay"; -}; - -&i2c1 { - status = "okay"; -}; - -&mdio_mux_iproc { - mdio@10 { - gphy0: eth-phy@10 { - reg = <0x10>; - }; - }; -}; - -&nand { - nandcs@0 { - compatible = "brcm,nandcs"; - reg = <0>; - nand-ecc-mode = "hw"; - nand-ecc-strength = <8>; - nand-ecc-step-size = <512>; - nand-bus-width = <16>; - brcm,nand-oob-sector-size = <16>; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "nboot"; - reg = <0x00000000 0x00280000>; /* 2.5MB */ - read-only; - }; - - partition@280000 { - label = "nenv"; - reg = <0x00280000 0x00040000>; /* 0.25MB */ - read-only; - }; - - partition@2c0000 { - label = "ndtb"; - reg = <0x002c0000 0x00040000>; /* 0.25MB */ - read-only; - }; - - partition@300000 { - label = "nsystem"; - reg = <0x00300000 0x03d00000>; /* 61MB */ - read-only; - }; - - partition@4000000 { - label = "nrootfs"; - reg = <0x04000000 0x06400000>; /* 100MB */ - }; - - partition@0a400000{ - label = "ncustfs"; - reg = <0x0a400000 0x35c00000>; /* 860MB */ - }; - }; -}; - -&pci_phy0 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; - -&pcie8 { - status = "okay"; -}; - -&sata_phy0 { - status = "okay"; -}; - -&sata_phy1 { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - -&qspi { - flash: m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "m25p80"; - spi-max-frequency = <62500000>; - m25p,default-addr-width = <3>; - reg = <0x0 0x0>; - - partition@0 { - label = "bl0"; - reg = <0x00000000 0x00080000>; /* 512KB */ - }; - - partition@80000 { - label = "fip"; - reg = <0x00080000 0x00150000>; /* 1344KB */ - }; - - partition@1e0000 { - label = "env"; - reg = <0x001e0000 0x00010000>;/* 64KB */ - }; - - partition@1f0000 { - label = "dtb"; - reg = <0x001f0000 0x00010000>; /* 64KB */ - }; - - partition@200000 { - label = "kernel"; - reg = <0x00200000 0x00e00000>; /* 14MB */ - }; - - partition@1000000 { - label = "rootfs"; - reg = <0x01000000 0x01000000>; /* 16MB */ - }; - }; -}; - -&uart3 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi deleted file mode 100644 index 35c8457e3d1f..000000000000 --- a/arch/arm64/boot/dts/broadcom/ns2.dtsi +++ /dev/null @@ -1,765 +0,0 @@ -/* - * BSD LICENSE - * - * Copyright (c) 2015 Broadcom. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Broadcom Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/memreserve/ 0x81000000 0x00200000; - -#include -#include - -/ { - compatible = "brcm,ns2"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - A57_0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; - reg = <0 0>; - enable-method = "psci"; - next-level-cache = <&CLUSTER0_L2>; - }; - - A57_1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; - reg = <0 1>; - enable-method = "psci"; - next-level-cache = <&CLUSTER0_L2>; - }; - - A57_2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; - reg = <0 2>; - enable-method = "psci"; - next-level-cache = <&CLUSTER0_L2>; - }; - - A57_3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a57", "arm,armv8"; - reg = <0 3>; - enable-method = "psci"; - next-level-cache = <&CLUSTER0_L2>; - }; - - CLUSTER0_L2: l2-cache@000 { - compatible = "cache"; - }; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = , - , - , - ; - }; - - pmu { - compatible = "arm,armv8-pmuv3"; - interrupts = , - , - , - ; - interrupt-affinity = <&A57_0>, - <&A57_1>, - <&A57_2>, - <&A57_3>; - }; - - pcie0: pcie@20020000 { - compatible = "brcm,iproc-pcie"; - reg = <0 0x20020000 0 0x1000>; - dma-coherent; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 281 IRQ_TYPE_NONE>; - - linux,pci-domain = <0>; - - bus-range = <0x00 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x83000000 0 0x00000000 0 0x00000000 0 0x20000000>; - - brcm,pcie-ob; - brcm,pcie-ob-oarr-size; - brcm,pcie-ob-axi-offset = <0x00000000>; - brcm,pcie-ob-window-size = <256>; - - status = "disabled"; - - phys = <&pci_phy0>; - phy-names = "pcie-phy"; - - msi-parent = <&v2m0>; - }; - - pcie4: pcie@50020000 { - compatible = "brcm,iproc-pcie"; - reg = <0 0x50020000 0 0x1000>; - dma-coherent; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 305 IRQ_TYPE_NONE>; - - linux,pci-domain = <4>; - - bus-range = <0x00 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x83000000 0 0x00000000 0 0x30000000 0 0x20000000>; - - brcm,pcie-ob; - brcm,pcie-ob-oarr-size; - brcm,pcie-ob-axi-offset = <0x30000000>; - brcm,pcie-ob-window-size = <256>; - - status = "disabled"; - - phys = <&pci_phy1>; - phy-names = "pcie-phy"; - - msi-parent = <&v2m0>; - }; - - pcie8: pcie@60c00000 { - compatible = "brcm,iproc-pcie-paxc"; - reg = <0 0x60c00000 0 0x1000>; - dma-coherent; - linux,pci-domain = <8>; - - bus-range = <0x0 0x1>; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x83000000 0 0x00000000 0 0x60000000 0 0x00c00000>; - - status = "disabled"; - - msi-parent = <&v2m0>; - }; - - soc: soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0 0xffffffff>; - - #include "ns2-clock.dtsi" - - enet: ethernet@61000000 { - compatible = "brcm,ns2-amac"; - reg = <0x61000000 0x1000>, - <0x61090000 0x1000>, - <0x61030000 0x100>; - reg-names = "amac_base", "idm_base", "nicpm_base"; - interrupts = ; - dma-coherent; - phy-handle = <&gphy0>; - phy-mode = "rgmii"; - status = "disabled"; - }; - - pdc0: iproc-pdc0@612c0000 { - compatible = "brcm,iproc-pdc-mbox"; - reg = <0x612c0000 0x445>; /* PDC FS0 regs */ - interrupts = ; - #mbox-cells = <1>; - dma-coherent; - brcm,rx-status-len = <32>; - brcm,use-bcm-hdr; - }; - - crypto0: crypto@612d0000 { - compatible = "brcm,spum-crypto"; - reg = <0x612d0000 0x900>; - mboxes = <&pdc0 0>; - }; - - pdc1: iproc-pdc1@612e0000 { - compatible = "brcm,iproc-pdc-mbox"; - reg = <0x612e0000 0x445>; /* PDC FS1 regs */ - interrupts = ; - #mbox-cells = <1>; - dma-coherent; - brcm,rx-status-len = <32>; - brcm,use-bcm-hdr; - }; - - crypto1: crypto@612f0000 { - compatible = "brcm,spum-crypto"; - reg = <0x612f0000 0x900>; - mboxes = <&pdc1 0>; - }; - - pdc2: iproc-pdc2@61300000 { - compatible = "brcm,iproc-pdc-mbox"; - reg = <0x61300000 0x445>; /* PDC FS2 regs */ - interrupts = ; - #mbox-cells = <1>; - dma-coherent; - brcm,rx-status-len = <32>; - brcm,use-bcm-hdr; - }; - - crypto2: crypto@61310000 { - compatible = "brcm,spum-crypto"; - reg = <0x61310000 0x900>; - mboxes = <&pdc2 0>; - }; - - pdc3: iproc-pdc3@61320000 { - compatible = "brcm,iproc-pdc-mbox"; - reg = <0x61320000 0x445>; /* PDC FS3 regs */ - interrupts = ; - #mbox-cells = <1>; - dma-coherent; - brcm,rx-status-len = <32>; - brcm,use-bcm-hdr; - }; - - crypto3: crypto@61330000 { - compatible = "brcm,spum-crypto"; - reg = <0x61330000 0x900>; - mboxes = <&pdc3 0>; - }; - - dma0: dma@61360000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x61360000 0x1000>; - interrupts = , - , - , - , - , - , - , - , - ; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - clocks = <&iprocslow>; - clock-names = "apb_pclk"; - }; - - smmu: mmu@64000000 { - compatible = "arm,mmu-500"; - reg = <0x64000000 0x40000>; - #global-interrupts = <2>; - interrupts = , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - ; - #iommu-cells = <1>; - }; - - pinctrl: pinctrl@6501d130 { - compatible = "brcm,ns2-pinmux"; - reg = <0x6501d130 0x08>, - <0x660a0028 0x04>, - <0x660009b0 0x40>; - }; - - gpio_aon: gpio@65024800 { - compatible = "brcm,iproc-gpio"; - reg = <0x65024800 0x50>, - <0x65024008 0x18>; - ngpios = <6>; - #gpio-cells = <2>; - gpio-controller; - }; - - gic: interrupt-controller@65210000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x65210000 0x1000>, - <0x65220000 0x1000>, - <0x65240000 0x2000>, - <0x65260000 0x1000>; - interrupts = ; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x652e0000 0x80000>; - - v2m0: v2m@00000 { - compatible = "arm,gic-v2m-frame"; - interrupt-parent = <&gic>; - msi-controller; - reg = <0x00000 0x1000>; - arm,msi-base-spi = <72>; - arm,msi-num-spis = <16>; - }; - - v2m1: v2m@10000 { - compatible = "arm,gic-v2m-frame"; - interrupt-parent = <&gic>; - msi-controller; - reg = <0x10000 0x1000>; - arm,msi-base-spi = <88>; - arm,msi-num-spis = <16>; - }; - - v2m2: v2m@20000 { - compatible = "arm,gic-v2m-frame"; - interrupt-parent = <&gic>; - msi-controller; - reg = <0x20000 0x1000>; - arm,msi-base-spi = <104>; - arm,msi-num-spis = <16>; - }; - - v2m3: v2m@30000 { - compatible = "arm,gic-v2m-frame"; - interrupt-parent = <&gic>; - msi-controller; - reg = <0x30000 0x1000>; - arm,msi-base-spi = <120>; - arm,msi-num-spis = <16>; - }; - - v2m4: v2m@40000 { - compatible = "arm,gic-v2m-frame"; - interrupt-parent = <&gic>; - msi-controller; - reg = <0x40000 0x1000>; - arm,msi-base-spi = <136>; - arm,msi-num-spis = <16>; - }; - - v2m5: v2m@50000 { - compatible = "arm,gic-v2m-frame"; - interrupt-parent = <&gic>; - msi-controller; - reg = <0x50000 0x1000>; - arm,msi-base-spi = <152>; - arm,msi-num-spis = <16>; - }; - - v2m6: v2m@60000 { - compatible = "arm,gic-v2m-frame"; - interrupt-parent = <&gic>; - msi-controller; - reg = <0x60000 0x1000>; - arm,msi-base-spi = <168>; - arm,msi-num-spis = <16>; - }; - - v2m7: v2m@70000 { - compatible = "arm,gic-v2m-frame"; - interrupt-parent = <&gic>; - msi-controller; - reg = <0x70000 0x1000>; - arm,msi-base-spi = <184>; - arm,msi-num-spis = <16>; - }; - }; - - cci@65590000 { - compatible = "arm,cci-400"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x65590000 0x1000>; - ranges = <0 0x65590000 0x10000>; - - pmu@9000 { - compatible = "arm,cci-400-pmu,r1", - "arm,cci-400-pmu"; - reg = <0x9000 0x4000>; - interrupts = , - , - , - , - , - ; - }; - }; - - usbdrd_phy: phy@66000960 { - #phy-cells = <0>; - compatible = "brcm,ns2-drd-phy"; - reg = <0x66000960 0x24>, - <0x67012800 0x4>, - <0x6501d148 0x4>, - <0x664d0700 0x4>; - reg-names = "icfg", "rst-ctrl", - "crmu-ctrl", "usb2-strap"; - id-gpios = <&gpio_g 30 0>; - vbus-gpios = <&gpio_g 31 0>; - status = "disabled"; - }; - - pwm: pwm@66010000 { - compatible = "brcm,iproc-pwm"; - reg = <0x66010000 0x28>; - clocks = <&osc>; - #pwm-cells = <3>; - status = "disabled"; - }; - - mdio_mux_iproc: mdio-mux@6602023c { - compatible = "brcm,mdio-mux-iproc"; - reg = <0x6602023c 0x14>; - #address-cells = <1>; - #size-cells = <0>; - - mdio@0 { - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - - pci_phy0: pci-phy@0 { - compatible = "brcm,ns2-pcie-phy"; - reg = <0x0>; - #phy-cells = <0>; - status = "disabled"; - }; - }; - - mdio@7 { - reg = <0x7>; - #address-cells = <1>; - #size-cells = <0>; - - pci_phy1: pci-phy@0 { - compatible = "brcm,ns2-pcie-phy"; - reg = <0x0>; - #phy-cells = <0>; - status = "disabled"; - }; - }; - - mdio@10 { - reg = <0x10>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - timer0: timer@66030000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x66030000 0x1000>; - interrupts = ; - clocks = <&iprocslow>, - <&iprocslow>, - <&iprocslow>; - clock-names = "timer1", "timer2", "apb_pclk"; - }; - - timer1: timer@66040000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x66040000 0x1000>; - interrupts = ; - clocks = <&iprocslow>, - <&iprocslow>, - <&iprocslow>; - clock-names = "timer1", "timer2", "apb_pclk"; - }; - - timer2: timer@66050000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x66050000 0x1000>; - interrupts = ; - clocks = <&iprocslow>, - <&iprocslow>, - <&iprocslow>; - clock-names = "timer1", "timer2", "apb_pclk"; - }; - - timer3: timer@66060000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x66060000 0x1000>; - interrupts = ; - clocks = <&iprocslow>, - <&iprocslow>, - <&iprocslow>; - clock-names = "timer1", "timer2", "apb_pclk"; - }; - - i2c0: i2c@66080000 { - compatible = "brcm,iproc-i2c"; - reg = <0x66080000 0x100>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = ; - clock-frequency = <100000>; - status = "disabled"; - }; - - wdt0: watchdog@66090000 { - compatible = "arm,sp805", "arm,primecell"; - reg = <0x66090000 0x1000>; - interrupts = ; - clocks = <&iprocslow>, <&iprocslow>; - clock-names = "wdogclk", "apb_pclk"; - }; - - gpio_g: gpio@660a0000 { - compatible = "brcm,iproc-gpio"; - reg = <0x660a0000 0x50>; - ngpios = <32>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - interrupts = ; - }; - - i2c1: i2c@660b0000 { - compatible = "brcm,iproc-i2c"; - reg = <0x660b0000 0x100>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = ; - clock-frequency = <100000>; - status = "disabled"; - }; - - uart0: serial@66100000 { - compatible = "snps,dw-apb-uart"; - reg = <0x66100000 0x100>; - interrupts = ; - clocks = <&iprocslow>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uart1: serial@66110000 { - compatible = "snps,dw-apb-uart"; - reg = <0x66110000 0x100>; - interrupts = ; - clocks = <&iprocslow>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uart2: serial@66120000 { - compatible = "snps,dw-apb-uart"; - reg = <0x66120000 0x100>; - interrupts = ; - clocks = <&iprocslow>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uart3: serial@66130000 { - compatible = "snps,dw-apb-uart"; - reg = <0x66130000 0x100>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&osc>; - status = "disabled"; - }; - - ssp0: ssp@66180000 { - compatible = "arm,pl022", "arm,primecell"; - reg = <0x66180000 0x1000>; - interrupts = ; - clocks = <&iprocslow>, <&iprocslow>; - clock-names = "spiclk", "apb_pclk"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - ssp1: ssp@66190000 { - compatible = "arm,pl022", "arm,primecell"; - reg = <0x66190000 0x1000>; - interrupts = ; - clocks = <&iprocslow>, <&iprocslow>; - clock-names = "spiclk", "apb_pclk"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - hwrng: hwrng@66220000 { - compatible = "brcm,iproc-rng200"; - reg = <0x66220000 0x28>; - }; - - sata_phy: sata_phy@663f0100 { - compatible = "brcm,iproc-ns2-sata-phy"; - reg = <0x663f0100 0x1f00>, - <0x663f004c 0x10>; - reg-names = "phy", "phy-ctrl"; - #address-cells = <1>; - #size-cells = <0>; - - sata_phy0: sata-phy@0 { - reg = <0>; - #phy-cells = <0>; - status = "disabled"; - }; - - sata_phy1: sata-phy@1 { - reg = <1>; - #phy-cells = <0>; - status = "disabled"; - }; - }; - - sata: ahci@663f2000 { - compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x663f2000 0x1000>; - dma-coherent; - reg-names = "ahci"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata0: sata-port@0 { - reg = <0>; - phys = <&sata_phy0>; - phy-names = "sata-phy"; - }; - - sata1: sata-port@1 { - reg = <1>; - phys = <&sata_phy1>; - phy-names = "sata-phy"; - }; - }; - - sdio0: sdhci@66420000 { - compatible = "brcm,sdhci-iproc-cygnus"; - reg = <0x66420000 0x100>; - interrupts = ; - dma-coherent; - bus-width = <8>; - clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>; - status = "disabled"; - }; - - sdio1: sdhci@66430000 { - compatible = "brcm,sdhci-iproc-cygnus"; - reg = <0x66430000 0x100>; - interrupts = ; - dma-coherent; - bus-width = <8>; - clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>; - status = "disabled"; - }; - - nand: nand@66460000 { - compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; - reg = <0x66460000 0x600>, - <0x67015408 0x600>, - <0x66460f00 0x20>; - reg-names = "nand", "iproc-idm", "iproc-ext"; - interrupts = ; - - #address-cells = <1>; - #size-cells = <0>; - - brcm,nand-has-wp; - }; - - qspi: spi@66470200 { - compatible = "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi"; - reg = <0x66470200 0x184>, - <0x66470000 0x124>, - <0x67017408 0x004>, - <0x664703a0 0x01c>; - reg-names = "mspi", "bspi", "intr_regs", - "intr_status_reg"; - interrupts = ; - interrupt-names = "spi_l1_intr"; - clocks = <&iprocmed>; - clock-names = "iprocmed"; - num-cs = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - }; -}; -- cgit v1.2.3-59-g8ed1b